Panasonic of North America 96NKX-HNS105 DECT 6.0 Indoor Siren User Manual Installation Manual English
Panasonic Corporation of North America DECT 6.0 Indoor Siren Installation Manual English
Users Manual
Installation Guide Home Network System Indoor Siren Model No. KX-HNS105 Thank you for purchasing a Panasonic product. This document explains how to install the indoor siren properly. For details about how to use the system, refer to the User’s Guide (page 12). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: www.panasonic.com/support for customers in the U.S.A. or Puerto Rico. Please register your product: www.panasonic.com/prodreg Printed in China HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Table of Contents Introduction Accessory information ...............3 Important Information About this system ......................4 For your safety ...........................4 Important safety instructions ......5 For best performance ................5 Other information .......................6 Setup Part names and functions ..........7 About the LED indicator .............7 Setup overview ..........................7 Registering the siren ..................8 Confirming the usage area ........9 Wall mounting ..........................10 Note about power connections .............................11 Appendix Testing the siren ......................12 Adjusting the siren’s volume ....12 Features available when using the [Home Network] app ................12 Accessing the User’s Guide ....12 Specifications ..........................12 FCC and other information ......14 Customer services ...................15 Warranty (For United States and Puerto Rico) .............................16 HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Introduction Accessory information Supplied accessories No. Accessory item/Part number AC adaptor/PNLV2360Z Wall mounting screws (25 mm (1 inch))/XTB4+25AVW Quantity Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Trademarks R iPhone and iPad are registered trademarks of Apple Inc. R Android is a trademark of Google Inc. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Important Information About this system This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/ power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. Danger of electric shock exists. R Never touch the plug with wet hands. Danger of electric shock exists. R Do not connect non-specified devices. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor to be excessively pulled, bent or placed under heavy objects. R Keep small parts (screws, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Never put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Important Information Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Use only the power cord indicated in this document. SAVE THESE INSTRUCTIONS CAUTION Installation and location R Never install wiring during a lightning storm. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. R To avoid the risk of strangulation, keep the product and the AC adaptor cord at least 1 m (3 feet) from a child’s crib and out of the reach of small children. Preventing accidents and injuries R Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment. R Do not look directly at the LED lights when they are lit. Failure to do so may cause damage to eyes. For best performance Hub location/avoiding noise The hub and other compatible Panasonic devices use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your hub: – at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment. – away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. – facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.) For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Important Information R If the reception for a hub location is not satisfactory, move the hub to another location for better reception. Notice Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Other information Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Setup Part names and functions A BCD Horn Strobe light Flashes when the siren is sounding. LED indicator MHIGHN/MLOWN Used to adjust the siren’s volume (page 12). Rear cover Used to confirm the status of the siren or register the siren to the hub. Indicator Status Green, lit Normal operation Red, blinking slowly Siren is not registered to a hub Red, blinking Siren is out of range of the hub Red, blinking quickly Alarm system was triggered Green, blinking Registration mode (You pressed and held N) Off No power Setup overview About the LED indicator Initial setup Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub. Registration Required only if the siren was purchased separately (i.e., not as part of a bundle). Confirm the installation area Read the information in this document to confirm that the desired installation area is suitable to proper operation. Installation Install the siren in the desired location. You can use the LED indicator to confirm the siren’s status. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Setup Registering the siren This procedure is not required for devices that were included as part of a bundle. Before you can use the siren, it must be registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub. Using the app When you register the siren by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 12). You can register each device by using the registration buttons or the [Home Network] app. Note: R Before registering the siren, make sure the AC adaptors of the hub and siren are connected and each device is powered. Using registration buttons 1 Hub: OTHER Press and hold M DEVICEN until the LED indicator blinks in green. Siren: Press and hold M N until the LED indicator blinks in green (page 7). R When registration is complete, the hub sounds one long beep. Note: R To cancel the registration, press N on the hub and on the siren. R If registration fails, the hub sounds several short beeps. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Setup Confirming the usage area Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings R Near fire or heating devices R Near magnetic fields (such as near microwaves and magnets) R Areas subject to extreme temperature changes, such as next to air conditioners R Areas with reflective objects, such as glass, that can interfere with detection of temperature variation R Areas where the temperature is affected by strong illuminating objects (such as fluorescent lights) R Near devices that emit strong radio waves, such as mobile phones Note: R You can use the siren’s LED indicator to confirm the siren’s communication status (page 7). If the LED indicator is lit in green or is blinking quickly in red, the siren is communicating properly with the hub. Usage area cautions Using the siren in the following areas may cause deformation, malfunction, or operational failure. R In direct sunlight R Areas exposed to grease or steam, such as kitchens For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 2014/11/19 20:18:28 Setup Wall mounting Using the rear cover To mount the siren flat against the wall, use the rear cover. Mounting examples*1 of the rear cover Remove the rear cover by pressing the upper sides of the cover (A) and sliding it down (B). A Rear cover *1 View of looking from above. Note: R The strobe light flashes when the siren sounds. Mount the siren in a location where its strobe light will be visible. R Mount the siren on the stable location where the siren can be adequately supported when mounting. R Do not mount siren on a soft material. It may fall down, break or cause injury. R Do not mount the siren on the following places: gypsum board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25.4 mm (1 inch) thick, etc. 10 Attach the rear cover to the wall by using screws (1). R Place the rear cover with “UP” mark facing upwards. R 2 37 mm (1 15/32 inches) For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 10 2014/11/19 20:18:28 Setup Insert the AC adaptor plug firmly into the DC jack (A). Connect the AC adaptor to the power outlet (B). Note: R Use only the supplied Panasonic AC adaptor PNLV236. Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Power failure R The siren will not work during a power failure. Attach the siren to the rear cover. R Insert the grooves on the siren to the 4 tabs on the rear cover, and then push down the siren. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 11 11 2014/11/19 20:18:28 Appendix Testing the siren After you have installed the [Home Network] app on your mobile device, you can use your mobile device to test the siren. For more information, refer to the User’s Guide (page 12). 1 Start the [Home Network], and tap [Settings]. 2 Tap [Device Registration] and select [Device Profiles]. 3 Tap [Siren] and select [Installation Test]. 4 Tap [Play]. Adjusting the siren’s volume You can adjust the siren’s volume using the siren’s MHIGHN/MLOWN switch (page 7). – Device management You can use the app to confirm the wireless signal strength of the siren, change the siren’s name, change whether the siren sounds, flashes, or both, and test the siren. Accessing the User’s Guide The User’s Guide is a collection of online documentation that helps you get the most out of the [Home Network] app. 1 iPhone®/iPad® Tap in the app’s home screen. Android™ devices Tap or press your mobile device’s menu button in the app’s home screen. 2 Tap [User’s Guide]. Note: R You can also access the User’s Guide at the web page listed below. Features available when using the [Home Network] app Some of the siren’s features that are available when using the [Home Network] app are listed below. For more information, refer to the User’s Guide (page 12). – Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the system’s devices, and view a log of previous events. You can also use the app to stop the siren from sounding. 12 www.panasonic.net/pcc/support/tel/ homenetwork/manual/ Specifications R Standards DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range DECT: 1.92 GHz – 1.93 GHz For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 12 2014/11/19 20:18:29 Appendix R RF transmission power DECT: 115 mW (max.) R Power source 120 V AC, 60 Hz R Power consumption Standby: Approx. xx W Maximum: Approx. xx W R Alert tone volume High alert level: approx. 110 dB Low alert level: approx. xx dB (measured approx. 10 cm (3 15/16 inches)) R Operating conditions 0 °C – 40 °C (32 °F – 104 °F) R Dimensions Approx. xx mm ´ xx mm ´ xx mm (xx inches ´ xx inches ´ xx inches) R Mass (weight) Approx. xx g (xx lb) For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 13 13 2014/11/19 20:18:29 Appendix FCC and other information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 14 interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Some devices operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the devices should not be placed near or on top of a TV or VCR. If interference is experienced, move this device away from the TV or VCR. This will often reduce or eliminate interference. FCC RF Exposure Warning: R This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. R To comply with FCC RF exposure requirements, the device must be installed and operated 20 cm (8 inches) or more between the product and all person’s body. R This product may not be collocated or operated in conjunction with any other antenna or transmitter. R For body-worn operation, the device must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements. Notice: R FCC ID can be found inside the unit. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 14 2014/11/19 20:18:29 Appendix Customer services Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: www.panasonic.com/support or, contact us via the web at: www.panasonic.com/contactinfo You may also contact us directly at: 1-800-272-7033, Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST. For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Owner’s Manual online for all Panasonic Products by visiting our Web Site at: www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com You may also contact us directly at:1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.) Panasonic National Parts Center 20421 84th Avenue S., Kent, WA 98032 (We accept Visa, MasterCard, Discover Card, American Express.) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 15 15 2014/11/19 20:18:29 Appendix Warranty (For United States and Puerto Rico) Panasonic Home Network System Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Parts Labor Home Network System Products One (1) Year One (1) Year microSD card (Included model only) 90 days N/A During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service--Online Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. 16 For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 16 2014/11/19 20:18:29 Appendix Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. When you ship the product ȷCarefully pack your unit, preferably in the original carton. ȷAttach a letter, detailing the symptom. ȷSend the unit to Panasonic Exchange Center, prepaid and adequately insured. ȷDo not send your unit to Panasonic Corporation of North America listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products. For assistance, please visit www.panasonic.com/support HNS105_(en_en)_1120_ver.010.pdf 17 17 2014/11/19 20:18:29 Notes 18 HNS105_(en_en)_1120_ver.010.pdf 18 2014/11/19 20:18:29 Notes 19 HNS105_(en_en)_1120_ver.010.pdf 19 2014/11/19 20:18:29 IMPORTANT! If your product is not working properly. . . A Reconnect the AC adaptor to the siren. B Use the Home Network app to access the User’s Guide and refer to the Troubleshooting section. Visit our Web site: www.panasonic.com/support • FAQ and troubleshooting hints are available. For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. Date of purchase (found inside the unit) Name and address of dealer Attach your purchase receipt here. Two Riverfront Plaza, Newark, NJ 07102-5490 © Panasonic System Networks Co., Ltd. 2015 HNS105_(en_en)_1120_ver.010.pdf 20 2014/11/19 20:18:29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:11:19 17:39:23+09:00 Creator Tool : XSL Formatter V4.3 MR6i (4,3,2013,0121) for Windows Modify Date : 2014:11:19 20:18:30+09:00 Metadata Date : 2014:11:19 20:18:30+09:00 Format : application/pdf Description : KX-HNS105 Creator : Panasonic System Networks Co., Ltd. Title : Installation Manual (English) Producer : Antenna House PDF Output Library 2.6.0 (Windows) Document ID : uuid:27ebc084-992e-40f5-91d8-73018cf5b783 Instance ID : uuid:78fca81e-e87a-4d6f-8f9b-938053465721 Page Count : 20 Subject : KX-HNS105 Author : Panasonic System Networks Co., Ltd.EXIF Metadata provided by EXIF.tools