Panasonic of North America 96NKX-TG6431 Part 15 Unlicensed PCS Base Station User Manual TG643X e 0808 shinsei

Download:
Mirror Download [FCC.gov]
Document ID	1023086
Application ID	1AW/YiDeFgqllXsyoniXbg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.77kB (759680 bits)
Date Submitted	2008-10-29 00:00:00
Date Available	2008-12-13 00:00:00
Creation Date	2008-08-08 13:39:40
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-08-08 13:39:40
Document Title	TG643X(e)_0808_shinsei.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	5098687

TG933X(e).book Page 1 Wednesday, September 26, 2007 2:00 PM
Operating Instructions
Expandable Digital Cordless
Answering System
Model No.
KX-TG6431
with 2 Handsets
Model No.
KX-TG6432
with 3 Handsets
Model No.
KX-TG6433
with 4 Handsets
Model No.
KX-TG6434
Model shown is KX-TG6431.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
Charge the handset batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save
them for future reference.
For assistance, visit our website:
http://www.panasonic.com/help for customers in the U.S.A. or Puerto
Rico.
TG933X(e).book Page 5 Wednesday, September 26, 2007 2:00 PM
Expanding your phone system
You can expand your phone system by registering optional handsets to a single base
unit.
Handsets: max. 6
Additional digital
cordless handset
KX-TGA640 or KX-TGA740
TG93XX_OI.book Page 7 Thursday, December 27, 2007 3:38 PM
Introduction
For your safety
To prevent severe injury and loss of
life/property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
L Use only the power source marked on
the product.
L Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
L Completely insert the AC
adaptor/power plug into the power
outlet. Failure to do so may cause
electric shock and/or excessive heat
resulting in a fire.
L Regularly remove any dust, etc. from
the AC adaptor/power plug by pulling
it from the power outlet, then wiping
with a dry cloth. Accumulated dust
may cause an insulation defect from
moisture, etc. resulting in a fire.
L Unplug the product from power outlets
if it emits smoke, an abnormal smell,
or makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has
stopped emitting and contact the
Panasonic Call Center at 1-800-211PANA (1-800-211-7262).
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical
shock, do not expose the product to
rain or any type of moisture.
L Do not place or use this product near
automatically controlled devices such
as automatic doors and fire alarms.
Radio waves emitted from this product
may cause such devices to
malfunction resulting in an accident.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to become
wet at all. This may cause a fire. If the
telephone line cord plug becomes
wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW
(max.).)
L Do not use the product in health care
facilities if any regulations posted in
the area instruct you not to do so.
Hospitals or health care facilities may
be using equipment that could be
sensitive to external RF energy.
CAUTION
Installation and relocation
L Never install telephone wiring during
an electrical storm.
L Never install telephone line jacks in
wet locations unless the jack is
specifically designed for wet
locations.
For assistance, please visit http://www.panasonic.com/help
TG93XX_OI.book Page 8 Thursday, December 27, 2007 3:38 PM
Introduction
L Never touch uninsulated telephone
wires or terminals unless the
telephone line has been disconnected
at the network interface.
L Use caution when installing or
modifying telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and
is easily accessible.
L This product is unable to make calls
when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
Battery
L We recommend using the batteries
noted on page 6. USE ONLY
rechargeable Ni-MH batteries AAA
(R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the
batteries is corrosive and may cause
burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
L Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets or
keys to touch the batteries, otherwise
a short circuit may cause the batteries
and/or the conductive material to
overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product
only, in accordance with the
instructions and limitations specified
in this manual.
L Only use a compatible base unit (or
charger) to charge the batteries. Do
not tamper with the base unit (or
charger). Failure to follow these
instructions may cause the batteries
to swell or explode.
Important safety
instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock
and injury to persons, including the
following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
3. Do not use the telephone to report a
gas leak in the vicinity of the leak.
4. Use only the power cord and
batteries indicated in this manual. Do
not dispose of batteries in a fire. They
may explode. Check with local codes
for possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
L For maximum coverage and noisefree communications, place your base
unit:
– at a convenient, high, and central
location with no obstructions
between the handset and base unit
in an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
For assistance, please visit http://www.panasonic.com/help
TG93XX_OI.book Page 9 Thursday, December 27, 2007 3:38 PM
Introduction
computers, wireless devices or
other phones.
– avoid facing radio frequency
transmitters, such as external
antennas of mobile phone cell
stations (avoid putting the base unit
on a bay window or near a window).
L Coverage and voice quality depends
on the local environmental conditions.
L If the reception for a base unit location
is not satisfactory, move the base unit
to another location for better
reception.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on the
power cord or top of the product.
L When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C (41 °F) or greater than 40 °C
(104 °F). Damp basements should
also be avoided.
L The maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground,
near metal objects such as wire
fences, etc.
L Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
L Wipe the outer surface of the
product with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Notice for product disposal, transfer,
or return
L This product can store your
private/confidential information. To
protect your privacy/confidentiality, we
recommend that you erase the
information such as phonebook or
caller list entries from the memory
before you dispose of, transfer, or
return the product.
For assistance, please visit http://www.panasonic.com/help
TG933X(e).book Page 11 Wednesday, September 26, 2007 2:00 PM
Handset
Controls
Base unit
C D EF G H
Charge contacts
Speaker
{ERASE}
{N} (STOP)
{^} (VOL.: Volume up)
{V} (VOL.: Volume down)
{7} (Repeat)
{8} (Skip)
F {6} (Play)
G {LOCATOR}
H { ANSWER ON}
Answer on indicator
Speaker
Belt clip slot
Soft keys
{C} (TALK)
{s} (SP-PHONE: Speakerphone)
Headset jack
Dial keypad
({*}: TONE)
H Charge indicator
Ringer indicator
Message indicator
I Receiver
J Display
K {OFF}
L Navigator key ({^}/{V})/
? (Receiver volume: {^}{V})
M {FLASH} {CALL WAIT}
N Microphone
O Charge contacts
TG933X(e).book Page 12 Wednesday, September 26, 2007 2:00 PM
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
L The AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV219.
Hook
(120 V AC,
60 Hz)
To single-line
telephone jack
(RJ11C)
L The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line
using a Panasonic T-adaptor .
If you subscribe to a DSL service
Please attach a DSL filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Charger
L Use only the supplied Panasonic AC
adaptor PQLV219.
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter
Hooks
(120 V AC, 60 Hz)
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
TG933X(e).book Page 13 Wednesday, September 26, 2007 2:00 PM
Battery installation and
replacement
Important:
L Use only the supplied rechargeable
batteries.
L USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/NiCd batteries.
L Ensure correct polarities (S, T)
when installing the batteries.
L Wipe the battery ends (S, T) with a
dry cloth.
L When installing the batteries, avoid
touching the battery ends (S, T) or
the unit contacts.
L When replacing batteries, we
recommend using the Panasonic
rechargeable batteies.
Press the notch on the handset
cover firmly, and slide it in the
direction of the arrow.
Insert the batteries negative (T)
end first. Close the handset cover.
Rechargeable Ni-MH ONLY
Note:
L When replacing batteries, remove the
old batteries.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
TG933X(e).book Page 14 Wednesday, September 26, 2007 2:00 PM
Battery charge
Place the handset on the base unit or
charger for 7 hours before initial use.
L While charging:
– “Charging” is displayed.
– the charge indicator on the handset
lights.
L When the battery is fully charged:
– “Charge completed” is
displayed.
– the charge indicator on the handset
goes off.
Base unit:
Charger:
Note:
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
L When the battery is empty, “Charge
for 7h” is displayed and the charge
indicator does not light for about 5
minutes to concentrate on charging.
TG933X(e).book Page 17 Wednesday, September 26, 2007 2:00 PM
Making calls
Answering calls
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
When a call is being received, the ringer
indicator flashes rapidly.
Press {C} or {CALL}.
When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Using the speakerphone
Dial the phone number, and press
{s}.
L Speak alternately with the other
party.
When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch to the receiver, press {C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial
list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
{REDIAL}
{C}
10
{V}/{^}: Select the desired phone
number.
Lift the handset and press {C} or
{s} when the unit rings.
When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 25.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 26).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing {OFF}.
TG93XX_OI.book Page 21 Thursday, December 27, 2007 3:38 PM
Shared Phonebook
Shared phonebook
Enter the party’s phone number (32
digits max.). i {OK}i {SAVE}
L To add other entries, repeat from
step 2.
{OFF}
Note:
L Caller ID subscribers can use ringer
ID feature (page 32).
Character table for entering names
Key
Character
{1}
& ’
{2}
b c
{3}
e f
D E F 3
{4}
h i
G H I
{5}
{6}
m n o
M N O 6
{7}
q r
{8}
u v
T U V 8
{9}
w x
{0}
Space
–
L To enter another character that is
located on the same dial key, first
press { } to move the cursor to the
next space.
Correcting a mistake
Press { } or { } to move the cursor to
the character or number you want to
erase, then press {CLEAR }. Enter the
appropriate character or number.
L Press and hold {CLEAR} to erase all
characters or numbers.
Scrolling through all entries
} i {SEARCH}
{V}/{^}: Select the desired entry.
{C}
Searching by first character
(alphabetically)
{V}/{^}: Scroll through the
phonebook if necessary.
{C}
A B C 2
K L
{#}
Finding and calling a
phonebook entry
characters max.). i { OK }
Adding entries
1 { }
2 {ADD}
3 Enter the party’s name (16
Character
{*}
The shared phonebook allows you to
make calls without having to dial
manually. Any handset registered to the
base unit can use the shared
phonebook. You can add 50 names and
phone numbers to the shared
phonebook.
Important:
L Only 1 person can access the shared
phonebook at a time.
Key
P Q R S 7
W X Y Z 9
} i {SEARCH}
Press the dial key ({0} – {9}, {*},
or {#}) which contains the
character you are searching for
(page 21).
L Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
For assistance, please visit http://www.panasonic.com/help
11
TG933X(e).book Page 29 Wednesday, September 26, 2007 2:00 PM
Registering a unit
Operating additional
handsets
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. When you purchase an
additional handset, refer to the additional
handset’s installation manual for
registration. If for some reason the
handset is not registered to the base
unit, register the handset.
Handset:
{MENU} i {#}{1}{3}{0}
Base unit:
Press and hold
{LOCATOR} for about 5 seconds,
until the registration tone
sounds.
L If all registered handsets start
ringing, press
{LOCATOR} to stop, then repeat
this step.
L After pressing
{LOCATOR}, the rest of this
procedure must be
completed within 90 seconds.
Handset:
Press {OK}, then wait until a long
beep sounds.
12
Using Caller ID service
Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to Caller ID service. Contact
your service provider/telephone
company for details.
Caller ID features
When an outside call is being received,
the name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list by the most
recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
– “Out of area”: The caller dialed
from an area which does not
provide Caller ID service.
– “Private caller”: The caller
requested not to send caller
information.
– “Long distance”: The caller
made a long distance call.
L If the unit is connected to a PBX
system, caller information may not be
received properly. Contact your PBX
supplier.
TG933X(e).book Page 33 Wednesday, September 26, 2007 2:00 PM
Answering system
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
Turning the answering
system on/off
Press {ANSWER ON} to turn on/off the
answering system.
L When the answering system is turned
on, the ANSWER ON indicator lights
up.
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6} (Message).
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a pre-recorded greeting message.
Recording your greeting
message
You can record your own greeting
message (2 minutes max.).
Handset
{MENU} i {#}{3}{0}{2}
{V}/{^}:“Yes” i {SELECT}
Hold the handset about 20 cm (8
inches) away and speak clearly into
the microphone.
Press {STOP}, to stop recording.
{OFF}
13
TG933X(e).book Page 53 Wednesday, September 26, 2007 2:00 PM
FCC and other information
This equipment complies with Part 68
of the FCC rules and the requirements
adopted by the ACTA. On the bottom
of this equipment is a label that
contains, among other information, a
product identifier in the format
US:ACJ----------.
If requested, this number must be
provided to the telephone company.
L Registration No
............(found on the bottom of the
unit)
L Ringer Equivalence No.
(REN).......0.1B
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with the product. It is
designed to be connected to a
compatible modular jack that is also
compliant.
The REN is used to determine the
number of devices that may be
connected to a telephone line.
Excessive RENs on a telephone line
may result in the devices not ringing in
response to an incoming call. In most
but not all areas, the sum of RENs
should not exceed five (5.0). To be
certain of the number of devices that
may be connected to a line, as
determined by the total RENs, contact
the local telephone company. For
products approved after July 23, 2001,
the REN for the product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN
without a decimal point (e.g., 03 is a
14
REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance
that temporary discontinuance of
service may be required. But if
advance notice isn’t practical, the
telephone company will notify the
customer as soon as possible. Also,
you will be advised of your right to file
a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications
to maintain uninterrupted service.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized
Servicer. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until the
problem is resolved.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
commission for information.
If your home has specially wired alarm
equipment connected to the telephone
line, ensure the installation of this
equipment does not disable your alarm
equipment. If you have questions
TG933X(e).book Page 54 Wednesday, September 26, 2007 2:00 PM
about what will disable alarm
equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid
compatible as defined by the FCC in
47 CFR Section 68.316.
When you hold the phone to your ear,
noise might be heard in your Hearing
Aid. Some Hearing Aids are not
adequately shielded from external RF
(radio frequency) energy. If noise
occurs, use an optional headset
accessory or the speakerphone option
(if applicable) when using this phone.
Consult with your audiologist or
Hearing Aid manufacturer about the
availability of Hearing Aids which
provide adequate shielding to RF
energy commonly emitted by digital
devices.
WHEN PROGRAMMING
EMERGENCY NUMBERS AND(OR)
MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly
explain to the dispatcher the reason
for the call.
2) Perform such activities in the offpeak hours, such as early morning
or late evenings.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not
be ensured when using this phone.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
device.
NOTE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause
interference to nearby TVs and VCRs.
To minimize or prevent such
interference, the base of the cordless
telephone should not be placed near
or on top of a TV or VCR. If
15
TG933X(e).book Page 55 Wednesday, September 26, 2007 2:00 PM
interference is experienced, move the
cordless telephone further away from
the TV or VCR. This will often reduce,
or eliminate, interference.
Notice
FCC RF Exposure Warning:
L This product complies with FCC
radiation exposure limits set forth for
an uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8
inches) or more between the
product and all person’s body
(excluding extremities of hands,
wrist and feet).
L This product may not be collocated
or operated in conjunction with any
other antenna or transmitter.
L The handset may be carried and
operated with only the specific
provided belt-clip. Other non-tested
belt-clips or similar body-worn
accessories may not comply and
must be avoided.
Notice
L FCC ID can be found inside the
battery compartment or on the
bottom of the units.
Compliance with TIA-1083 standard:
Telephone handsets identified with this
logo have reduced noise and interference
when used with T-Coil equipped hearing
aids and cochlear implants.
Compatible with
Hearing Aid T-Coil
TIA-1083
16
ENERGY STAR
As an ENERGY STAR® Participant,
Panasonic has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
ENERGY STAR is a U.S. registered
mark.
TG933X(e).book Page 64 Wednesday, September 26, 2007 2:00 PM
If you need assistance with setup or operation
1. Visit our website: http://www.panasonic.com/help
2. Contact us via the web at: http://www.panasonic.com/contactus
3. Call us at: 1-800-211-PANA (1-800-211-7262)
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom, to the outside of the carton.
L Send the unit to Panasonic Service and Technology Company, Exchange Center,
prepaid and adequately insured.
L Do not send your unit to Panasonic Consumer Electronics Company listed below
or to executive or regional sales offices. These locations do not repair consumer
products.
For your future reference
We recommend keeping a record of the following information to assist with any repair
under warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is
prohibited without the written consent of Panasonic Communications Co., Ltd.
© 2008 Panasonic Communications Co., Ltd. All Rights Reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:08:08 13:39:40+09:00
Modify Date                     : 2008:08:08 13:39:40+09:00
Metadata Date                   : 2008:08:08 13:39:38+09:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:EB1E93020465DD119F11FB4A399B2D9C
Instance ID                     : uuid:fd386157-8592-419a-9b15-649d531f79fa
Derived From Document Name      : uuid:c20504e8-3638-4830-bf5a-e195a5036480
Derived From Document ID        : uuid:57e12a9d-850e-4265-ba3d-316cca82eb3a
Format                          : application/postscript
Creator                         : 5098687
Title                           : TG643X(e)_0808_shinsei.pdf
Page Count                      : 17
Author                          : 5098687

EXIF Metadata provided by EXIF.tools