Panasonic of North America 96NKX-TGA930 Cordless Telephone Handset User Manual Draft

Panasonic Corporation of North America Cordless Telephone Handset Draft

User Manual

Temporary ConfidentialThis unit is compatible with Caller ID. You must subscribe to the appropriateservice offered by your service provider/telephone company.Please read these operating instructions before using the unit and savethem for future reference.For assistance, visit our website:http://www.panasonic.com/help for customers in the U.S.A. or PuertoRico.Charge the handset batteries for about 7 hours before initial use.Operating InstructionsExpandable Digital CordlessAnswering SystemModel No. KX-TG9331TG933X(e).book Page 1 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential2Expanding your phone systemYou can expand your phone system by registering optional handsets to a single baseunit.Handsets: max. 6Additional digitalcordless handsetKX-TGA930TG933X(e).book Page 5 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential3Important safetyinstructionsWhen using the product, basic safetyprecautions should always be followedto reduce the risk of fire, electric shock,or personal injury.1. Read all instructions carefully.2. Follow all warnings and instructionsmarked on the product.3. Unplug the product from poweroutlets before cleaning. Do not useliquid or aerosol cleaners. Use amoist cloth for cleaning.4. Do not use the product near water, forexample near a bathtub, wash bowl,kitchen sink, etc.5. Place the product securely on astable surface. Serious damageand/or injury may result if the productfalls.6. Do not cover slots and openings onthe product. They are provided forventilation and protection againstoverheating. Never place the productnear radiators, or in a place whereproper ventilation is not provided.7. Use only the power source markedon the product. If you are not sure ofthe type of power supplied to yourhome, consult your dealer or localpower company.8. Do not place objects on the powercord. Install the product where no onecan step or trip on the cord.9. Do not overload power outlets andextension cords. This can result inthe risk of fire or electric shock.10.Never push any objects through slotsin the product. This may result in therisk of fire or electric shock. Neverspill any liquid on the product.11.To reduce the risk of electric shock,do not disassemble the product. Takethe product to an authorized servicecenter when service is required.Opening or removing covers mayexpose you to dangerous voltages orother risks. Incorrect reassembly cancause electric shock when theproduct is subsequently used.12.Unplug the product from poweroutlets and take to an authorizedservice center when the followingconditions occur:A. When the power cord is damagedor frayed.B. If liquid has been spilled into theproduct.C. If the product has been exposedto rain or water.D. If the product does not worknormally by following theoperating instructions. Adjust onlycontrols covered by the operatinginstructions. Improper adjustmentmay require extensive work by anauthorized service center.E. If the product has been droppedor physically damaged.F. If the product exhibits a distinctchange in performance.13.During thunderstorms, avoid usingtelephones except cordless types.There may be a remote risk of anelectric shock from lightning.14.Do not use the product to report a gasleak, when in the vicinity of the leak.SAVE THESE INSTRUCTIONSWARNINGLTo prevent the risk of fire or electricalshock, do not expose the product torain or any type of moisture.LUnplug the product from power outletsif it emits smoke, an abnormal smell,or makes an unusual noise. Theseconditions can cause fire or electricshock. Confirm that smoke hasTG933X(e).book Page 7 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential4stopped emitting and contact thePanasonic Call Center at 1-800-211-PANA (1-800-211-7262).LDo not spill liquids (detergents,cleansers, etc.) onto the telephoneline cord plug, or allow it to becomewet at all. This may cause a fire. If thetelephone line cord plug becomeswet, immediately pull it from thetelephone wall jack, and do not use.LDo not place or use this product nearautomatically controlled devices suchas automatic doors and fire alarms.Radio waves emitted from this productmay cause such devices tomalfunction resulting in an accident.LCompletely insert the ACadaptor/power plug into the poweroutlet. Failure to do so may causeelectric shock and/or excessive heatresulting in a fire.LRegularly remove any dust, etc. fromthe AC adaptor/power plug by pullingit from the power outlet, then wipingwith a dry cloth. Accumulated dustmay cause an insulation defect frommoisture, etc. resulting in a fire.CAUTIONInstallationLNever install telephone wiring during alightning storm.LNever install telephone line jacks inwet locations unless the jack isspecifically designed for wetlocations.LNever touch uninsulated telephonewires or terminals unless thetelephone line has been disconnectedat the network interface.LUse caution when installing ormodifying telephone lines.LDo not touch the plug with wet hands.LThe AC adaptor is used as the maindisconnect device. Ensure that the ACoutlet is installed near the product andis easily accessible.BatteryTo reduce the risk of fire or injury topersons, read and follow theseinstructions.LWe recommend using the batteriesUse only rechargeable battery(ies).LDo not mix old and new batteries.LDo not dispose of the batteries in afire, as they may explode. Check withlocal waste management codes forspecial disposal instructions.LDo not open or mutilate the batteries.Released electrolyte from thebatteries is corrosive and may causeburns or injury to the eyes or skin. Theelectrolyte may be toxic if swallowed.LExercise care when handling thebatteries. Do not allow conductivematerials such as rings, bracelets orkeys to touch the batteries, otherwisea short circuit may cause the batteriesand/or the conductive material tooverheat and cause burns.LCharge the batteries provided with oridentified for use with this product onlyin accordance with the instructionsand limitations specified in thismanual.LOnly use a compatible base unit (orcharger) to charge the batteries. Donot tamper with the base unit (orcharger). Failure to follow theseinstructions may cause the batteriesto swell or explode.LThis product is unable to make callswhen:– the portable handset batteries needrecharging or have failed.– there is a power failure.TG933X(e).book Page 8 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential5MedicalLConsult the manufacturer of anypersonal medical devices, such aspacemakers or hearing aids, todetermine if they are adequatelyshielded from external RF (radiofrequency) energy. (The productoperates in the frequency range of1.92 GHz to 1.93 GHz, and the poweroutput is 125 mW (max.).) Do not usethe product in health care facilities ifany regulations posted in the areainstruct you not to do so. Hospitals orhealth care facilities may be usingequipment that could be sensitive toexternal RF energy.Notice for product disposal, transfer,or returnLThis product can store yourprivate/confidential information. Toprotect your privacy/confidentiality, werecommend that you erase theinformation such as phonebook orcaller list entries from the memorybefore you dispose, transfer, or returnthe product.For best performanceBase unit location/avoiding noiseThe base unit and other compatiblePanasonic units use radio waves tocommunicate with each other.LFor maximum coverage and noise-free communications, place your baseunit:– at a convenient, high, and centrallocation with no obstructionsbetween the handset and base unitin an indoor environment.– away from electronic appliancessuch as TVs, radios, personalcomputers, wireless devices orother phones.– avoid facing radio frequencytransmitters, such as externalantennas of mobile phone cellstations (avoid putting the base uniton a bay window or near a window).LCoverage and voice quality dependson the local environmental conditions.LIf the reception for a base unit locationis not satisfactory, move the base unitto another location for betterreception.EnvironmentLKeep the product away from electricalnoise generating devices, such asfluorescent lamps and motors.LThe product should be kept free fromexcessive smoke, dust, hightemperature, and vibration.LThe product should not be exposed todirect sunlight.LDo not place heavy objects on top ofthe product.LWhen you leave the product unusedfor a long period of time, unplug theproduct from the power outlet.LThe product should be kept away fromheat sources such as heaters, kitchenstoves, etc. It should not be placed inrooms where the temperature is lessthan 5 °C(41°F) or greater than 40 °C(104 °F). Damp basements shouldalso be avoided.LThe maximum calling distance may beshortened when the product is used inthe following places: Near obstaclessuch as hills, tunnels, underground,near metal objects such as wirefences, etc.LOperating the product near electricalappliances may cause interference.Move away from the electricalappliances.TG933X(e).book Page 9 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential6ControlsBase unitACharge contactsBSpeakerC{Nn} (STOP)D{ERASE}E{GREETING REC} (Recording)F{GREETING CHECK}G{ANSWER ON}H{LOCATOR}{INTERCOM}I{6} (Play)Message indicatorJ{^} (VOL.: Volume up){V} (VOL.: Volume down){7} (Repeat){8} (Skip)HandsetASpeakerB{MENU}CSoft keysDHeadset jackE{C} (TALK)F{s} (SP-PHONE: Speakerphone)GDial keypad({*}: TONE)H{FLASH}{CALL WAIT}ICharge indicatorRinger indicatorMessage indicatorJReceiverKDisplayL{OFF}MNavigator key ({^}/{V}/{>}/{<})/? (Receiver volume: {^}{V})N{PAUSE}{REDIAL}O{HOLD}{INTERCOM}PMicrophoneABCDE FIJHGAJKMNCLIOPQBCHGDEFTG933X(e).book Page 11 Wednesday, September 26, 2007 2:00 PMQCharge contactsRoutine careLWipe the outer surface of the productwith a soft moist cloth.LDo not use benzine, thinner, or anyabrasive powder.
Temporary Confidential7ConnectionsConnect the telephone line cord until itclicks into the base unit and telephoneline jack (A). Connect the AC adaptorcord (B) by pressing the plug firmly (C).Base unitLUse only the supplied Panasonic ACadaptor PQLV207.LUse only the supplied telephone linecord. If you use a telephone line cordwhich is not supplied, the unit may notwork properly.(120 V AC, 60 Hz)To single-line telephonejack (RJ11C)HookTG933X(e).book Page 12 Wednesday, September 26, 2007 2:00 PMChargerLUse only the supplied Panasonic ACadaptor PQLV209.Note:LThe AC adaptor must remainconnected at all times. (It is normal forthe adaptor to feel warm during use.)LThe AC adaptor should be connectedto a vertically oriented or floor-mounted AC outlet. Do not connectthe AC adaptor to a ceiling-mountedAC outlet, as the weight of the adaptormay cause it to become disconnected.During a power failureLThe unit will not work during a powerfailure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line using a Panasonic T-adaptor.If you subscribe to a DSL servicePlease attach a DSL filter (contact your DSL provider) to the telephone linebetween the base unit and the telephoneline jack in the event of the following:– noise is heard during conversations.B(120 V AC, 60 Hz)HooksC
Temporary Confidential8– Caller ID features do not functionproperly.Battery installation andreplacementImportant:LUse only the supplied rechargeablebatteries.LUSE ONLY rechargeable Ni-MHbatteries AAA (R03) size.LDo NOT use Alkaline/Manganese/Ni-Cd batteries.LEnsure correct polarities (S,T)when installing the batteries.LWipe the battery ends (S,T) with a dry cloth.LWhen installing the batteries, avoidtouching the battery ends (S,T) orthe unit contacts.LWhen replacing batteries, werecommend using the Panasonicrechargeable batteies.To single-line telephonejack (RJ11C)DSL filterTG933X(e).book Page 13 Wednesday, September 26, 2007 2:00 PM1Press the notch on the handsetcover firmly, and slide it in thedirection of the arrow.2Insert the batteries negative (T)end first. Close the handset cover.Note:LWhen replacing batteries, remove theold batteries.Attention:Rechargeable Ni-MH ONLY
Temporary Confidential9A nickel metal hydride battery that isrecyclable powers the product you havepurchased.Please call 1-800-8-BATTERY (1-800-822-8837) for information on how torecycle this battery.Battery chargePlace the handset on the base unit orcharger for 7 hours before initial use.LWhile charging:–“Charging” is displayed.– the charge indicator on the handsetlights in amber.LWhen the battery is fully charged:–“Charge completed” isdisplayed.– the charge indicator on the handsetlights in amber.Note:LIt is normal for the handset to feelwarm during charging.LIf you want to use the handsetimmediately, charge the batteries forat least 15 minutes.LClean the charge contacts of thehandset, base unit, and charger with a Base unit: Charger:TG933X(e).book Page 14 Wednesday, September 26, 2007 2:00 PMsoft and dry cloth once a month. Clean more often if the unit is subject to theexposure of grease, dust, or highhumidity.LWhen the battery is empty, “Chargefor 7h” is displayed and the chargeindicator does not light for about 5minutes to concentrate on charging.
Temporary Confidential10Making calls1Lift the handset and dial the phone number.LTo correct a digit, press {Clear}.2Press {C} or {Call}.3When you finish talking, press{OFF}or place the handset on thebase unit or charger.Note:L“Line in use”is displayed when someone is talking on the handset oranother phone.Using the speakerphone1Dial the phone number, and press{s}.LSpeak alternately with the otherparty.2When you finish talking, press{OFF}.Note:LFor best performance, use thespeakerphone in a quiet environment.LTo switch to the receiver, press {C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly whiletalking.Making a call using the rediallistThe last 5 phone numbers dialed arestored in the redial list (each 48 digitsmax.).1{REDIAL}2{V}/{^}: Select the desired phone number.3{C}Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1Lift the handset and press {C} or {s} when the unit rings.2When you finish talking, press{OFF}or place the handset on thebase unit or charger.TG933X(e).book Page 17 Wednesday, September 26, 2007 2:00 PMShared phonebookThe shared phonebook allows you tomake calls without having to dialmanually. Any handset registered to thebase unit can use the shared phonebook. You can add 50 names and phone numbers to the sharedphonebook.Important:LOnly 1 person can access the sharedphonebook at a time.Registering a unitOperating additionalhandsetsAdditional handsetsUp to 6 handsets can be registered tothe base unit.Important:LAdditional handsets will give you thefreedom to, for example, have an intercom call with another handsetwhile a third handset is on an outsidecall.
Temporary Confidential11Registering a handset to abase unitThe supplied handset and base unit are pre-registered. When you purchase an additional handset, refer to the additionalhandset’s installation manual forregistration. If for some reason thehandset is not registered to the baseunit, register the handset.1Handset:{MENU}i{#}{1}{3}{0}2Base unit:Press and hold{LOCATOR/INTERCOM} for about5 seconds, until the registration tonesounds.LIf all registered handsets startringing, press{LOCATOR/INTERCOM} to stop,then repeat this step.LAfter pressing{LOCATOR/INTERCOM}, therest of this procedure must be completed within 90 seconds.3Handset:Press {OK}, then wait until a longbeep sounds.TG933X(e).book Page 29 Wednesday, September 26, 2007 2:00 PMUsing Caller ID serviceImportant:LThis unit is Caller ID compatible. Touse Caller ID features, you mustsubscribe to Caller ID service. Contactyour service provider/telephonecompany for details.Caller ID featuresWhen an outside call is being received,the name and phone number are displayed.Caller information for the last 50 callersis logged in the caller list by the mostrecent call to the oldest.LGenerally caller information isdisplayed from the 2nd ring.LIf the unit cannot receive caller information, the following is displayed:–“Out of area”: The caller dialedfrom an area which does notprovide Caller ID service.–“Private caller”: The callerrequested not to send callerinformation.–“Long distance”: The callermade a long distance call.LIf the unit is connected to a PBXsystem, caller information may not bereceived properly. Contact your PBXsupplier.
Temporary Confidential12Answering systemThe answering system can answer and record calls for you when you areunavailable to answer the phone.Turning the answeringsystem on/offPress {ANSWER ON} to turn on/off theanswering system.LWhen the answering system is turnedon, the ANSWER ON indicator lightsup.Greeting messageWhen the unit answers a call, callers are greeted by a greeting message. You can record your own greeting message or use a pre-recorded greeting message.Recording your greetingmessageYou can record your own greetingmessage (2 minutes max.).TG933X(e).book Page 33 Wednesday, September 26, 2007 2:00 PM1{GREETING REC}2Within 10 seconds, press{GREETING REC} again.3Hold the handset about 20 cm (8inches) away and speak clearly intothe microphone.4Press {STOP}, to stop recording.5{OFF}Listening to messagesusing the base unitWhen new messages have been recorded, the message indicator on thebase unit flashes.Press {6} (Message).LIf new messages have been recorded,the base unit plays back newmessages.LIf there are no new messages, thebase unit plays back all messages.
Temporary Confidential13FCC and other informationThis equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No ............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. Acompliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digitsrepresented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also,you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other AuthorizedServicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions TG933X(e).book Page 53 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential14about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear,noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR)MAKING TEST CALLS TOEMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peak hours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If TG933X(e).book Page 54 Wednesday, September 26, 2007 2:00 PM
Temporary Confidential15NoticeENERGY STARAs an ENERGY STAR® Participant,Panasonic has determined that thisproduct meets the ENERGY STARguidelines for energy efficiency.ENERGY STAR is a U.S. registeredmark.interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all person’s body (excluding extremities of hands, wrist and feet). LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.LThe handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.NoticeL FCC ID can be found inside the battery compartment or on the bottom of the units.TG933X(e).book Page 55 Wednesday, September 26, 2007 2:00 PM
Temporary ConfidentialIf you need assistance with setup or operation1. Visit our website: http://www.panasonic.com/help2. Contact us via the web at: http://www.panasonic.com/contactus3. Call us at: 1-800-211-PANA (1-800-211-7262)TTY users (hearing or speech impaired users) can call 1-877-833-8855.When you ship the productLCarefully pack your unit, preferably in the original carton.LAttach a letter, detailing the symptom, to the outside of the carton.LSend the unit to Panasonic Service and Technology Company, Exchange Center,prepaid and adequately insured.LDo not send your unit to Panasonic Consumer Electronics Company listed belowor to executive or regional sales offices. These locations do not repair consumerproducts.For your future referenceWe recommend keeping a record of the following information to assist with any repairunder warranty.Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Puerto Rico, Inc.San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,Carolina, Puerto Rico 00985Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may bereproduced for internal use only. All other reproduction, in whole or in part, isprohibited without the written consent of Panasonic Communications Co., Ltd.© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.Serial No. Date of purchase(found on the bottom of the base unit)Name and address of dealerAttach your purchase receipt here.TG933X(e).book Page 64 Wednesday, September 26, 2007 2:00 PM

Navigation menu