Panasonic of North America 96NKX-TGE270 DECT 6.0 Base with BT User Manual Operating Instructions English

Panasonic Corporation of North America DECT 6.0 Base with BT Operating Instructions English

Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	2140236
Application ID	3DqoLhBUzQjjk3245VVh8g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	249.14kB (3114244 bits)
Date Submitted	2013-12-12 00:00:00
Date Available	2014-01-26 00:00:00
Creation Date	2013-12-03 14:52:51
Producing Software	Antenna House PDF Output Library 2.6.0 (Windows)
Document Lastmod	2013-12-10 19:27:54
Document Title	Operating Instructions (English)
Document Creator	XSL Formatter V4.3 MR6i (4,3,2013,0121) for Windows
Document Author:	Panasonic System Networks Co., Ltd.

Operating Instructions
Link-to-Cell Bluetooth Convergence Solution
Model No.
Model shown is KX-TGE260.
KX-TGE260
KX-TGE262
KX-TGE263
KX-TGE264
KX-TG454SK
KX-TGE270
KX-TGE272
KX-TGE273
KX-TGE274
KX-TGE275
KX-TG465SK
Before initial use, see “Getting Started”
on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 78.
For assistance, visit our Web site: http://www.panasonic.com/help for customers
in the U.S.A. or Puerto Rico.
Please register your product: http://www.panasonic.com/prodreg
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:34
Table of Contents
Introduction
Programming
Model composition .......................................3
Accessory information ..................................3
Menu list .....................................................36
Alarm ..........................................................43
Silent mode ................................................44
Call block ....................................................45
Other programming ....................................46
Registering a unit .......................................47
Important Information
For your safety .............................................6
Important safety instructions ........................7
For best performance ...................................7
Other information .........................................8
Specifications ...............................................9
Getting Started
Caller ID Service
Using Caller ID service ...............................48
Caller list ....................................................48
Setting up ...................................................10
Controls ......................................................12
Display icons/Indicators .............................13
Language settings ......................................15
Date and time .............................................15
Recording your greeting message .............15
Other settings .............................................15
Using Bluetooth Devices
Link to Cell
Answering system for landline ...................55
Turning the answering system on/off .........55
Greeting message ......................................55
Listening to messages ...............................56
Advanced new message alerting
features ......................................................57
Remote operation .......................................59
Answering system settings .........................60
Link to cell feature ......................................17
Pairing a cellular phone ..............................17
Link to cell settings .....................................18
Making/Answering Calls Using
the Handset
Making cellular calls ...................................21
Making landline calls ..................................21
Answering calls ..........................................22
Useful features during a call .......................22
Power back-up operation for landline .........25
Making/Answering Calls Using
the Base Unit
Making cellular calls ...................................27
Making landline calls ..................................27
Answering calls ..........................................27
Useful features during a call .......................28
Locator/Intercom
Handset locator ..........................................30
Cell locator .................................................30
Intercom .....................................................30
Copying phonebook from a cellular phone
(phonebook transfer) ..................................51
Text message (SMS) alert .........................52
Using a Bluetooth wireless headset (optional)
for landline calls .........................................53
Answering System for Landline
Useful Information
Voice mail service for landline ....................62
Wall mounting ............................................63
Error messages ..........................................66
Troubleshooting .........................................67
FCC and other information .........................75
Guía Rápida Española
Guía Rápida Española ...............................78
Appendix
Customer services .....................................88
Warranty (For United States and Puerto
Rico) ...........................................................89
Index
Index...........................................................91
Phonebook
Phonebook .................................................32
Speed dial ..................................................35
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:34
Introduction
Model composition
n KX-TGE260 series
n KX-TGE270 series
R Model shown is KX-TGE262.
R Model shown is KX-TGE272.
Base unit
Handset
Part No.
Part No.
KX-TGE260
KX-TGE260
KX-TGEA20
KX-TGE262
KX-TGE260
KX-TGEA20
KX-TGE263
KX-TGE260
KX-TGEA20
KX-TGE264
KX-TGE260
KX-TGEA20
KX-TG454SK
KX-TGE260
KX-TGEA20
KX-TGE270
KX-TGE270
KX-TGEA20
KX-TGE272
KX-TGE270
KX-TGEA20
KX-TGE273
KX-TGE270
KX-TGEA20
KX-TGE274
KX-TGE270
KX-TGEA20
KX-TGE275
KX-TGE270
KX-TGEA20
KX-TG465SK
KX-TGE270
KX-TGEA20
Series
Model No.
KX-TGE260
series
KX-TGE270
series
Quantity
Accessory information
Supplied accessories
Supplied handset qty.
1 unit*1
No.
Accessory item/
Order number
2 units*2
3 units*3
4 units*4
5 units*5
Accessory quantity
AC adaptor/PNLV226Z
Telephone line cord/
PQJA10075Z
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:34
Introduction
Supplied handset qty.
1 unit*1
No.
Accessory item/
Order number
3 units*3
4 units*4
5 units*5
Accessory quantity
Wall mounting adaptor/
PNKL1044Z1
Rechargeable batteries/
HHR-4DPA
10
Handset cover*6/
PNYNTGEA20SR
Belt clip/PNKE1312Z1
Charger/PNLC1050ZS
–
*1
*2
*3
*4
*5
*6
2 units*2
KX-TGE260/KX-TGE270
KX-TGE262/KX-TGE272
KX-TGE263/KX-TGE273
KX-TGE264/KX-TGE274/KX-TG454SK
KX-TGE275/KX-TG465SK
The handset cover comes attached to the handset.
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 88).
Accessory item
Order number
Rechargeable
batteries
HHR-4DPA*1
R To order, please visit
http://www.panasonic.com/batterystore
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset
KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptor
KX-J66
Range extender
KX-TGA405*2
Key detector
KX-TGA20*3
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Introduction
*1
*2
*3
Replacement batteries may have a different capacity from that of the supplied batteries.
By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site: http://www.panasonic.com/RangeExtender
By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to
which the key detector is attached. Please visit our Web site:
http://panasonic.net/pcc/products/telephone/p/tga20/
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Expanding your phone system
Handset (optional): KX-TGEA20
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
Bluetooth® devices
You can expand your phone system by pairing the following units to a single base unit.
Your Bluetooth cellular phone*1: 2 max.
(for cellular calls: page 17)
Your Bluetooth headset*1: 1 max.
(for a wireless hands-free conversation: page 53)
*1
Your cellular phone and headset must be Bluetooth wireless technology compatible. For
more details and the list of compatible cellular phones, please visit our Web site:
http://www.panasonic.com/link2cell
Trademarks
R The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Panasonic Corporation is under license.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Important Information
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
at http://www.panasonic.com/contactinfo
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Important Information
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Important Information
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
ENERGY STAR
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Important Information
Specifications
R Standard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
Bluetooth wireless technology 2.1
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 1.2 W
Maximum: Approx. 4.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
2013/12/03
14:54:35
Getting Started
n Charger
Connect the AC adaptor to the power
outlet.
Setting up
Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (1).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
).
R Confirm correct polarities ( ,
R Follow the directions on the display to set
up the unit.
10
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
10
2013/12/03
14:54:35
Getting Started
Battery level
Battery charging
Charge for about 7 hours.
R Confirm “Charging” is displayed (1).
R When the batteries are fully charged,
“Fully charged” is displayed.
Icon
Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery
performance (supplied batteries)
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.
Operation
Operating time
In continuous use
10 hours max.*1
Not in use (standby)
8 days max.*1
*1
If eco mode is on.
Note:
R Actual battery performance depends on
usage and ambient environment.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
R When this feature is activated,
is
displayed. However, during a cellular call,
is not displayed even though this
feature is activated.
R Eco mode is turned off when the clarity
booster is activated (page 23).
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
11
2013/12/03
14:54:35
11
Getting Started
MOFFN
N (NOISE REDUCTION/Smart
function key)
indicator
Charge contacts
Controls
Handset
n Control type
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
MCELLN is displayed.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
(Volume: MDN or MCN): Adjust the
–
receiver or speaker volume while talking.
– MFN W: View the phonebook entry.
– MEN REDIAL: View the redial list.
– MCN CID (Caller ID): View the caller list.
Base unit
n KX-TGE260 series: page 3
H I
Ringer indicator
Belt clip hole
Speaker
MjN/MkN (VOL.: Volume up/down)
N (TALK)
Dial keypad (*: TONE)
Headset jack
MZN (SP-PHONE: Speakerphone)
MFLASHNMCALL WAITN
Microphone
Receiver
Display
12
M LK
Charge contacts
Speaker
HEADSET indicator
MANSWER ON/OFFN
CELL 1 indicator
CELL 2 indicator
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
12
2013/12/03
14:54:35
Getting Started
Message counter
N (PLAY/STOP)
Message indicator
MLOCATES CELLN
MHANDSET LOCATORN
MjN/MkN (VOL.: Volume up/down)
MERASEN
N (Skip)
N (Repeat)
MCELL 2N M
N (Repeat)
Microphone
Dial keypad (*: TONE)
Display icons/Indicators
Handset display items
n KX-TGE270 series: page 3
Item
Meaning
Within base unit range
Out of base unit range
The landline is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
LM
A cellular line is in use.*1
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
Charge contacts
Speaker
MHOLDN MCONFN
MREDIALN MPAUSEN
MFLASHN MCALL WAITN
MZN (SP-PHONE: Speakerphone)
SP-PHONE indicator
HEADSET indicator
CELL 1 indicator
CELL 2 indicator
Message counter
N (PLAY/STOP)
Message indicator
MANSWER ON/OFFN
MLOCATES CELLN
MLOCATORN MINTERCOMN
MjN/MkN (VOL.: Volume up/down)
MERASEN MMUTEN
MCELL 1N M
N (Skip)
A cellular phone is
connected.*1 Ready to make/
receive cellular calls.
R When turned off:
A cellular phone is not
connected to the base
unit. (page 19)
PO
– A cellular call is being
done on that line.
– The cellular line is
selected for the setting.
Eco mode is on.*2 (page 11)
Noise reduction is set.
(page 23)
Equalizer is set. (page 23)
Speakerphone is on.
(page 21)
Ringer volume is off.*3
(page 38, 40)
Silent mode is on. (page 44)
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
13
2013/12/03
14:54:35
13
Getting Started
Item
Meaning
Status
Meaning
Call sharing mode is off.
(page 42)
Flashing
– The cellular line is in use.
– Phonebook entries are
being copied from a
cellular phone (page 51).
– The base unit is searching
for the paired cellular
phone.
– The base unit is pairing a
cellular phone.
– A cellular call is put on hold.
Flashing
rapidly
A cellular call is being
received.
Light off
– A cellular phone is not
paired to the base unit.
– A cellular phone is not
connected to the base unit
(page 19).
Alarm is on. (page 43)
Handset number
Battery level
Blocked call (page 45)
Clarity booster is on.*2
(page 23)
In use
Answering system is being
used by another handset or
the base unit.
Cell1 in
use
Someone is using the
corresponding line.
Cell2 in
use
C1&C2 in
use
Bluetooth HEADSET indicator on the
base unit
Line in
use
The HEADSET indicator shows the Bluetooth
headset status.
*1
*2
*3
Corresponding cellular line(s) is(are)
indicated next to the item.
During a cellular call, the item is not
displayed even though the feature is
activated.
Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
Status
Meaning
On
A Bluetooth headset is
connected to the base unit.
Ready to use it.
Flashing
– A Bluetooth headset is in
use.
– The base unit is searching
for the paired Bluetooth
headset.
– The base unit is pairing a
headset.
– Mute is turned on.
Flashing
rapidly
A landline call is being
received.
Light off
– The Bluetooth headset is
not connected to the base
unit.
– A Bluetooth headset is not
paired to the base unit.
Base unit display item
Item
Meaning
“Greeting only” is
selected. Caller messages
are not recorded. (page 61)
CELL indicators on the base unit
The CELL indicators show each cellular line
status.
Status
Meaning
On
A cellular phone is connected.
Ready to make/receive
cellular calls.
14
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
14
2013/12/03
14:54:35
Getting Started
Language settings
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
MMENUN#110
MbN: Select the desired setting. a
MSAVEN
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
MMENUN#112
MbN: Select the desired setting.
MSAVEN a MOFFN
MMENUN#302
MbN: “Yes” a MSELECTN
Record a greeting message. a MSTOPN
a MOFFN
Other settings
Smart function key (
key)
key) is located
The Smart function key (
on the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the
indicator flashes rapidly,
you can:
– Answer the call (outside call, intercom).
(page 22, 31)
– Stop paging. (page 30)
– Stop the alarm sound. (page 44)
Date and time
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 55 for details.
MOFFN
Voice guidance language
Recording your greeting
message
MMENUN#101
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2014
07 15 14
MOKN
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
*: Select “AM” or “PM”.
MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
n When the
indicator flashes slowly in
standby mode, you can:
– Listen to new messages. (page 56)
– Listen to new voice mail messages.
(page 63)
– View the caller list when there are
missed calls. (page 49)
To activate these features, their Smart
function key must be “On”. (page 16)
Using the Smart function key (
When the
indicator flashes rapidly/slowly,
press M
N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
15
key)
2013/12/03
14:54:35
15
Getting Started
activated. You can talk or listen to new
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages, new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
Setting the Smart function key
The Smart function key for the following
features must be “On”.
– “New message” (Default: On)
– “New VM” (Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
MMENUN#278
MbN: Select the desired setting and press
MSELECTN.
R “ ” is displayed next to the selected
features.
R To cancel a selected feature, press
MSELECTN again. “ ” disappears.
MSAVEN a MOFFN
Note:
R If the
indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
16
MMENUN#120
MbN: Select the desired setting.
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
16
2013/12/03
14:54:35
Link to Cell
Link to cell feature
You can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if
some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular
phone is in your pocket or bag.
– enjoy cordless cellular calls even if your
cellular phone plugged in and charging.
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R You may pair 2 cellular phones and 1
headset.
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Locate your cellular phone near the base
unit. If the cellular phone is too close to the
base unit during a cellular call, you may
hear noise. For best performance, we
recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet)
away from the base unit.
Pairing a cellular phone
Important:
R For more details and the list of compatible
cellular phones, please visit our Web site:
http://www.panasonic.com/link2cell
R Before pairing a Bluetooth enabled cellular
phone to the base unit, make sure that no
other Bluetooth device such as a Bluetooth
headset is connected to your cellular phone.
Handset:
For CELL 1: MMENUN#6241
For CELL 2: MMENUN#6242
R After the corresponding CELL indicator
on the base unit starts flashing, the
rest of the procedure must be
completed within 5 minutes.
Your cellular phone:
While the corresponding CELL indicator
is flashing, follow the instructions of your
cellular phone to enter the pairing mode.
R Depending on your cellular phone, it
may ask you to enter the Bluetooth
PIN (default: “0000”). If your cellular
phone shows PassKey confirmation on
its display, follow the directions to
proceed.
Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to
complete pairing.
R When the corresponding CELL
indicator lights up, the cellular phone is
connected to the base unit. You are
ready to make cellular calls.
MOFFN
Note:
R Make sure that your cellular phone is set to
connect to this product automatically. Refer
to your cellular phone’s operating
instructions.
R Make sure you cancel your cellular phone’s
current pairing if you want to pair it to the
other line (page 17).
R The default setting for the text message
alert feature is “On(no announce)”, so
when you pair your cellular phone to the
base unit, this feature may be activated
(page 52). (This depends on the version
and type of cellular phone you are using.)
Unpairing a cellular phone
You can cancel the pairing of a cellular phone
that is stored in the base unit.
For CELL 1: MMENUN#6111
For CELL 2: MMENUN#6112
MbN: “Yes” a MSELECTN
R When the cellular phone is unpaired,
the CELL indicator is turned off.
MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
17
2013/12/03
14:54:35
17
Link to Cell
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When “All” is
selected, all handsets and the base unit ring.
For CELL 1: MMENUN#6271
For CELL 2: MMENUN#6272
MbN: Select the desired handset or “All”.
a MSAVEN
MOFFN
Note:
R When you select a specific handset to
receive calls for a cellular line:
– other handsets cannot answer the calls.
– the base unit can answer the calls even
though it does not ring. However, you
can make the base unit ring by adjusting
the base unit ringer volume (page 38).
R When you change the setting to “All”, the
base unit ringer volume also returns to the
lowest level even if the ringer volume has
been changed.
R The units selected with this setting have the
text message alert feature (page 52)
applied to them.
Ring as cell mode
Once this feature is turned on, the handset
and base unit ring using the same ringer tone
as your cellular phone.
The following settings are available:
– “Off”: Turn this feature off to use the
ringer tones of the handset and base unit.
Caller information is announced depending
on the Talking Caller ID setting (page 40).
– “On (with Talking CID)” (default):
The handset and base unit use your cellular
phone’s ringer tone. Caller information is
announced even if the Talking Caller ID is
turned off.
– “On (without Talking CID)”: The
handset and base unit use your cellular
phone’s ringer tone. Caller information is
18
not announced even if the Talking Caller ID
is turned on.
Important:
R To use this feature, your cellular phone
must support Bluetooth in-band ringtone.
Refer to your cellular phone’s operating
instructions.
For CELL 1: MMENUN#6141
For CELL 2: MMENUN#6142
MbN: Select the desired setting.
MSAVEN a MOFFN
Note:
R The units use the preset ringer tones
(page 40) instead of your cellular phone’s
ringer tone when a cellular call is being
received if:
– your cellular phone is in silent mode
(depending on your cellular phone).
– the base unit is in use.
– 2 handsets are sharing a landline call.
R If your cellular phone is in silent mode with
“On (with Talking CID)” set, the unit
announces caller information even when
Talking Caller ID is turned off (page 40).
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
Select “Off” in step 2, “Ring as cell mode”,
page 18.
To change the handset ringer tone for a
cellular line, see page 38.
Auto connection to the Bluetooth
devices (cellular phones or
headset)
After pairing, your Bluetooth devices are
connected to the base unit. If you move the
Bluetooth devices out of base unit range, the
Bluetooth devices are disconnected from the
base unit. This feature allows the base unit to
try to reconnect the Bluetooth devices at
regular intervals when it returns within base
unit range. You can set the interval. The
default setting is “1 min”.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
18
2013/12/03
14:54:35
Link to Cell
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
MMENUN#632
MbN: Select the desired setting.
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select “Off” in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone’s link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is
brought within the base unit’s range during
the auto connection interval, it may
automatically connect to the base unit
(page 18).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
MOFFN
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
Important:
R If you turn on the “Cell line only
mode”, disconnect the telephone line cord
from the base unit. Otherwise the “Cell
line only mode” cannot be activated.
MMENUN#157
To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
N or MZN
instead of MCELLN (page 21).
– for the base unit, press MZN instead of
the line button (MCELL 1N or MCELL 2N)
set for the cellular line selection
(page 20, 27). (KX-TGE270 series:
page 3)
R Once you set this mode, the following
features cannot be used:
– Landline features (page 43)
– Answering system (page 55)
Messages cannot be received.
– Voice mail features (page 62)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
–
will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select “Off” in step 2, “Cellular line
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
19
2013/12/03
14:54:35
19
Link to Cell
only mode (If you do not use the landline)”,
page 19.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
– you press M
N or MZN on the handset
while the cellular line only mode is turned
on.
– you press MZN on the base unit while the
cellular line only mode is turned on.
(KX-TGE270 series: page 3)
The following settings are available:
– “Manual” (handset only: default): You can
select the desired cellular line when making
a call.
– “Cellular phone 1” (base unit default):
CELL 1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
*1
prevent unauthorized access to this product,
we recommend that you change the PIN, and
keep it confidential.
Important:
R Please make note of your new PIN. The
unit does not reveal the PIN to you. If you
forget your PIN, see page 74.
MMENUN#619
R If the unit prompts you to enter the old
PIN (when the default has been
changed), enter the current 4-digit PIN.
Enter the new 4-digit PIN. a MOKN
MOFFN
Enter the new 4-digit PIN again. a
MSAVEN
For handset: MMENUN#634
For base unit*1: MMENUN#*634
MbN: Select the desired setting.
MSAVEN a MOFFN
KX-TGE270 series: page 3
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
MMENUN#633
Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
MSAVEN a MOFFN
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair cellular phones to the
base unit. The default PIN is “0000”. To
20
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
20
2013/12/03
14:54:36
Making/Answering Calls Using the Handset
Making cellular calls
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 14).
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Go to step 4.
Erasing a number in the redial list
n When a cellular phone is paired:
1 MEN REDIAL
MbN: Select the desired phone number.
a MMENUN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
n When a cellular phone is not paired:
1 MEN REDIAL
MbN: Select the desired phone number.
a MERASEN
MbN: “Yes” a MSELECTN
MOFFN
MbN: Select the desired cellular phone. a
MSELECTN
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/
N.
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while talking.
Making a cellular call using the redial
list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
– a specific line is set to make cellular
calls (page 20).
MbN: Select the desired cellular phone. a
MSELECTN
Making landline calls
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
Dial the phone number and press MZN.
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
N.
MEN REDIAL
MbN: Select the desired phone number.
Making a call using the redial list
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
MEN REDIAL
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
21
2013/12/03
14:54:36
21
Making/Answering Calls Using the Handset
MbN: Select the desired phone number.
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
9 a MDN (Pause)
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
Lift the handset and press M
N or MZN
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 42).
Temporary ringer off: You can turn the ringer
off temporarily by pressing M N.
Using the Smart function key
When the
indicator flashes rapidly, press
N.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 15).
You can finish talking by pressing MOFFN
without lifting up the handset.
22
Adjusting the handset ringer volume
Press MjN or MkN repeatedly to select the
desired volume while ringing.
Useful features during a
call
Hold
Press MMENUN during an outside call.
MbN: “Hold” a MSELECTN
To release hold on the cellular line:
Press MCELLN*1.
R Another handset user can take the call
by pressing MCELLN*1.
*1 If you press MCELLN and the
selection list is displayed, select
the desired cellular line and press
MSELECTN.
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
(KX-TGE270 series: page 3)
To release hold on the landline:
N.
Press M
R Another handset user can take the call
N.
by pressing M
R The base unit user can take the call by
pressing MZN. (KX-TGE270 series:
page 3)
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
Press MMUTEN during a call.
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
22
2013/12/03
14:54:36
Making/Answering Calls Using the Handset
is not displayed even though the
feature is activated.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 42.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
Press MCALL WAITN to answer the 2nd
call.
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
Press M
N to turn on/off while talking.
Note:
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
Press MMENUN while talking.
MbN: “Equalizer” a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
Press * (TONE) before entering access
numbers which require tone dialing.
Note:
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the “Equalizer” setting and
noise reduction are activated,
is
shown on the display.
Handset clarity booster
Call share
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
is
displayed. However, during a cellular call,
You can join an existing outside call.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
n While another unit is on a cellular call:
1 To join the conversation, press
MCELLN.
R You can join the conversation when:
– only 1 cellular phone is paired.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
23
2013/12/03
14:54:36
23
Making/Answering Calls Using the Handset
– a specific line is set to make
cellular calls (page 20).
MbN: Select the desired cellular phone.
a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M
N.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 42).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
During an outside call, press MMENUN.
MbN: “Intercom” a MSELECTN
MbN: Select the desired unit. a MSELECTN
Wait for the paged party to answer.
R If the paged party does not answer,
press M
N to return to the outside
call.
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
Transferring a cellular call
between the handset and a
cellular phone
Transferring a cellular call from the
handset to a cellular phone
Transferring a cellular call from a
cellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
During a conversation using a cellular
phone, press MCELLN.
R The call is transferred to the handset
when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
MbN: Select the desired cellular phone. a
MSELECTN
R The call is transferred to the handset.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 40) and the
2nd caller’s information is displayed if you
subscribe to Caller ID (page 48).
Answering a 2nd call during a
landline call
24
Press MMENUN during a cellular call.
MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
cellular phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
Press MMENUN during a landline call.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
24
2013/12/03
14:54:36
Making/Answering Calls Using the Handset
MbN: “Hold” a MSELECTN
To answer the 2nd call:
MCELLN
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M
N.
Answering a 2nd call during a cellular
call
*1
Press MMENUN during a cellular call.
MbN: “Hold” a MSELECTN
To answer the 2nd call:
N or MCELLN
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN*1.
If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.
Power back-up operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
“Power failure” and the default setting is
“Auto” (page 42).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power back-up mode.
R Power back-up mode will not work if the
battery level of the power supplying
handset is
or .
R Do not lift the power supplying handset
from the base unit during power back-up
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 2 hours
max.
– Not in use in power back-up mode: 2 hours
max.
Making calls during a power
failure
n When only 1 handset is registered:
1 Lift the handset and dial the phone
number.
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1 Lift the handset.
MEN REDIAL
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
25
2013/12/03
14:54:36
25
Making/Answering Calls Using the Handset
MbN: Select the desired phone number.
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Making a call using the phonebook
There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
Answering calls during a power
failure
n When only 1 handset is registered:
1 When the unit rings, keep the handset
on the base unit and press M
N or
MZN.
R Speakerphone is turned on.
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
26
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
26
2013/12/03
14:54:36
Making/Answering Calls Using the Base Unit
Making cellular calls
Available for:
KX-TGE270 series (page 3)
Dial the phone number.
When you finish talking, press MZN.
Press MCELL 1N or MCELL 2N.
When the other party answers, speak into
the microphone.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 28), press MCELLN*1 on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Adjusting the speaker volume
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 28).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a MREDIALN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
MZN
9 a MPAUSEN
Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
Press MCELL 1N or MCELL 2N.
MREDIALN
Making landline calls
Dial the phone number.
When you finish talking, press MZN.
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
Speak into the microphone.
MZN
When the other party answers, speak into
the microphone.
When you finish talking, press MZN.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
27
2013/12/03
14:54:36
27
Making/Answering Calls Using the Base Unit
Adjusting the base unit ringer volume
For call waiting service users
Press MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN
until the unit beeps.
To use call waiting, you must first subscribe
with your service provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
Useful features during a
call
Hold
Press MHOLDN during an outside call.
To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
MCELLN*1 a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
To release hold on the landline:
Press MZN.
R A handset user can take the call by
N.
pressing M
Note:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Press MMUTEN during a call.
R The SP-PHONE indicator flashes.
To return to the call, press MMUTEN.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 42.
28
Press MCALL WAITN to answer the 2nd
call.
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MZN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 42).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between a handset and the base unit.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
28
2013/12/03
14:54:36
Making/Answering Calls Using the Base Unit
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
Answering a 2nd call during a cellular
call
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Answering a 2nd call during a
landline call
Press MHOLDN during a landline call.
To answer the 2nd call:
Press MCELL 1N or MCELL 2N.
To hang up the 2nd call and return to the
1st call (landline call), press MZN 2 times.
Press MHOLDN during a cellular call.
To answer the 2nd call:
MZN, MCELL 1N, or MCELL 2N
To hang up the 2nd call and return to the
1st call (cellular call), press MZN, then
press MCELL 1N or MCELL 2N.
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 40).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
29
2013/12/03
14:54:36
29
Locator/Intercom
Erasing the number
Handset locator
You can locate a misplaced handset by
paging it.
Base unit: Press MLOCATORN or
MHANDSET LOCATORN.
R All registered handsets beep for 1
minute.
To stop paging:
Base unit:
Press MLOCATORN or MHANDSET
LOCATORN.
Handset:
n KX-TGE260 series: page 3
Press MOFFN.
n KX-TGE270 series: page 3
N, then press MOFFN.
Press M
Using the Smart function key
You can also stop paging:
– KX-TGE260 series: press M
– KX-TGE270 series: press M
press MOFFN.
N, then
MMENUN#248
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Calling the misplaced cellular
phone
Base unit: MLOCATES CELLN
R To stop calling:
– KX-TGE260 series: press MLOCATES
CELLN again.
– KX-TGE270 series: press MZN.
Important:
R While the base unit is calling the cellular
phone, the outside line is used.
– KX-TGE260 series: Even if the cellular
phone answers, you cannot talk with the
cellular phone. To end the call, press
MLOCATES CELLN on the base unit.
– KX-TGE270 series: When the cellular
phone answers, you can talk with the
cellular phone. To end the call, press
MZN on the base unit.
Charges may be incurred if the cellular
phone answers the call.
Cell locator
This feature allows you to locate a misplaced
cellular phone by pressing the MLOCATES
CELLN button on the base unit and calling
your cellular phone. You must assign your
cellular phone’s phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
MMENUN#248
R If you have already stored a cellular
phone number, the current number is
displayed.
Enter your cellular phone number. a
MSAVEN a MOFFN
30
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit*1
*1 KX-TGE270 series: page 3
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 40).
– To answer the call with the handset,
press MOFFN, then press the
corresponding line key.
– To answer the call with the base unit,
press MZN, then press the corresponding
line key.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
30
2013/12/03
14:54:36
Locator/Intercom
Making an intercom call
Handset
MMENUN a MbN: “Intercom” a
MSELECTN
MbN: Select the desired unit. a MSELECTN
When you finish talking, press MOFFN.
Note:
R You can also use the MINTN soft key, if
displayed, to make intercom calls.
Base unit*1
*1
KX-TGE270 series: page 3
Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
R To stop paging, press MINTERCOMN.
When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
Press M
N to answer the page.
When you finish talking, press MOFFN.
Base unit*1
*1
KX-TGE270 series: page 3
Press MINTERCOMN to answer the page.
When you finish talking, press
MINTERCOMN.
Using the Smart function key
Press M
N to answer the page.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
31
2013/12/03
14:54:36
31
Phonebook
n When a cellular phone is not paired:
1 MEN REDIAL
Phonebook
You can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 33). The
following groups are available:
– Group 1: “Home”*1 (default)
– Group 2: “Cell 1”*1
– Group 3: “Cell 2”*1
– Group 4-9: You can change the group
name for each group.
*1 For groups 1-3, the group names cannot
be changed.
Important:
R All entries can be shared by the any
registered handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit’s
phonebook (page 51).
Adding phonebook entries
MbN: Select the desired phone number.
a MSAVEN
To store the name, continue from step
3, “Editing entries”, page 34.
Storing caller information to the
phonebook
n When a cellular phone is paired:
1 MCN CID
MbN: “Add new entry” a MSELECTN
Enter the party’s name. a MOKN
Enter the party’s phone number. a MOKN
MbN: Select the desired group. a
MSELECTN 2 times
MOFFN
Storing a redial list number to the
phonebook
MbN: “Phonebook” a MSELECTN
Continue from step 3, “Editing entries”,
page 34.
n When a cellular phone is not paired:
1 MCN CID
MFN W a MMENUN
MbN: Select the desired entry. a
MSELECTN a MSAVEN
R To edit the number, press *
repeatedly until the phone number
is shown in the desired format.
MbN: Select the desired entry. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. And then, press
MSAVEN. Go to step 4.
MbN: “Save CID” a MSELECTN
MbN: “Phonebook” a MSELECTN
Continue from step 3, “Editing entries”,
page 34.
Phone numbers of up to 24 digits can be
stored in the phonebook.
Character table for entering names
n When a cellular phone is paired:
1 MEN REDIAL
While entering characters, you can switch
between uppercase and lowercase by
pressing * (A®a).
MbN: Select the desired phone number.
a MMENUN
MbN: “Save” a MSELECTN
32
To store the name, continue from step
3, “Editing entries”, page 34.
Key
Character
’
–
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
32
2013/12/03
14:54:36
Phonebook
Key
Character
Changing group names/setting ringer
ID
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
R in the above table represents a single
space.
Erasing the character or number
Press MFN or MEN. a MCLEARN
R Press and hold MCLEARN to erase all
characters or numbers.
Groups
Groups can help you find entries in the
phonebook quickly and easily. You can
change the group name for groups 4-9
(“Friends”, “Family”, etc.). By assigning
different ringer tones for different groups of
callers, you can identify who is calling (ringer
ID), if you have subscribed to Caller ID service.
MFN W a MMENUN
MbN: “Group” a MSELECTN
MbN: Select the desired group. a
MSELECTN
R If you selected “Home”, “Cell 1”, or
“Cell 2”, go to step 5.
To change group names
MbN: “Group name” a MSELECTN a
Edit the name (10 characters max.). a
MSAVEN
To set group ringer tone
MbN: Select the current setting of the
group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN
MOFFN
Finding and calling from a
phonebook entry
n Using a cellular line:
MFN W
To scroll through all entries
MbN: Select the desired entry.
To search by first character
Press the dial key (0 to 9, or #)
which contains the character you are
searching for (page 32).
MbN: Scroll through the phonebook if
necessary.
To search by query
You can narrow down the search to enter
the first characters of a name.
To search for the name, enter the
first characters (up to 4) in
uppercase (page 32).
MOKN
MbN: Scroll through the phonebook if
necessary.
To search by group
MGROUPN
MbN: Select the desired group. a
MSELECTN
MbN: Scroll through the phonebook if
necessary.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
33
2013/12/03
14:54:37
33
Phonebook
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
MbN: Select the desired cellular phone. a
MSELECTN
n Using the landline:
MFN W
To scroll through all entries
MbN: Select the desired entry.
To search by first character
Press the dial key (0 to 9, or #)
which contains the character you are
searching for (page 32).
MbN: Scroll through the phonebook if
necessary.
To search by query
You can narrow down the search to enter
the first characters of a name.
To search for the name, enter the
first characters (up to 4) in
uppercase (page 32).
MOKN
MbN: Scroll through the phonebook if
necessary.
To search by group
MGROUPN
MbN: Select the desired group. a
MSELECTN
MbN: Scroll through the phonebook if
necessary.
Editing entries
Find the desired entry (page 33). a
MMENUN
MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN
MbN: Select the desired group (page 33).
a MSELECTN 2 times
MOFFN
34
Erasing entries
Erasing an entry
Find the desired entry (page 33). a
MMENUN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
Erasing all entries
MFN W a MMENUN
MbN: “Erase all” a MSELECTN
MbN: Select the desired group. a
MSELECTN
MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
During an outside call, press MMENUN.
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry.
Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 22).
R If you have rotary/pulse service, you need
to press * (TONE) before pressing
MMENUN in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
34
2013/12/03
14:54:37
Phonebook
phone numbers you wish to chain dial
(page 32).
Erasing an entry
Speed dial
You can assign 1 phone number to each of
the dial keys (1 to 9) on the handset.
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Viewing an entry/Making a call
n Using a cellular line:
1 Press and hold the desired speed dial
key (1 to 9).
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
MbN: Select the desired cellular phone.
a MSELECTN
MbN: “Manual” a MSELECTN
Enter the party’s name (16 characters
max.). a MOKN
Enter the party’s phone number (24
digits max.). a MOKN
MSELECTN a MOFFN
n From the phonebook:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
Press and hold the desired speed dial key
(1 to 9). a MMENUN
n Using the landline:
1 Press and hold the desired speed dial
key (1 to 9).
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry.
MSAVEN a MOFFN
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
Press and hold the desired speed dial key
(1 to 9). a MMENUN
MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN
MSELECTN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
35
2013/12/03
14:54:37
35
Programming
Menu list
To access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENUN
Press MCN or MDN to select the desired main menu. a MSELECTN
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
Press MCN or MDN to select the desired setting. a MSAVEN
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
Select the desired setting. a MSAVEN
Note:
R To exit the operation, press MOFFN.
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
Main menu: W “Phonebook”
Operation
Code
Viewing the phonebook entry.
#280
Main menu:
“Caller list”
Operation
Code
Viewing the caller list.
#213
Main menu:
33
48
“Answering device”
Sub-menu 1
Sub-menu 2
Settings
Code
Play new message
–
–
#323
56
Play all message
–
–
#324
56
Erase all
message*1
–
–
#325
57
Record greeting*1
–
#302
55
Check greeting
–
#303
56
Pre-recorded*1
(Reset to pre-recorded
greeting)
–
#304
56
Greeting
36
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
36
2013/12/03
14:54:37
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
New message
alert*1
Outgoing call
– On/Off
On

#338
57
Outgoing call
– Notification to
Settings
Outgoing call
– Remote code
Activate

Base unit beep
On

#339
57
Ring count*1
2-7 rings
<4 rings>
Toll saver
#211
60
Recording time*1
1 min
<3 min>
Greeting only*2
#305
60
Remote code*1
<111>
#306
59
Screen call
– Handset

Off
#310
60
Screen call
– Base unit*1, *3

Off
#G310
60
Answer on*1
Answer
off*1
Main menu:
–
“Voice Mail
–
–
#327
55
–
–
#328
55
access”*4
Operation
Code
Listening to voice mail messages.
#330
Main menu:
63
“Intercom”
Operation
Code
Paging the desired unit.
#274
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
37
2013/12/03
14:54:37
31
37
Programming
Main menu:
“Bluetooth”
Sub-menu 1
Sub-menu 2
Link to cell
– 1: Add new
device*5
(for CELL 1)
– 2: Add new
device*5
(for CELL 2)
Connect*1/
Disconnect*1
Settings
Code
–
#6251*6
Ringer volume
– Handset
Off–6 <6>
Ringer volume
– Base unit*1
Off–6 <1>
Ringer tone*8
*6
*7
#6291*6
Select unit to
ring*1
Handset 1-6

#6271*6
Ring as cell
(limited)*1

On (without
Talking CID)
Off
#6141*6
Text message
alert
– On/Off*1

On(with name)
Off
#6101*6
Text message
alert
– Alert tone*8
*6
*7
#6101*6
–
#6241*6
Pair
19
#6252*7
#6281*6
22
#6282*7
#G6281*6
28
#G6282*7
–
#6292*7
18
#6272*7
18
#6142*7
52
#6102*7
52
#6102*7
17
#6242*7
Unpair
–
#6111*6
17
#6112*7
Phonebook
transfer
–
Headset
38
–
#618
51
Add new device*5
–
#621
53
Connect*1/
Disconnect*1
–
#622
53
Pair
–
#621
53
Unpair
–
#612
53
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
38
2013/12/03
14:54:37
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
Settings
Auto connect*1
<1 min>
3 min
5 min
10 min
Off
#632
18
#633
20
Cell line only
mode*1
On

–
#157
19
Cell line select
– Handset
Cellphone 1*5
Cellphone 2*5

#634
20
Cell line select
– Base unit*1, *3
*5
Cellphone 2*5
#G634
Set PIN*1
<0000>
Cell area code*1
#619
20
International
code*1
–
#117
51
Country code*1
–
#118
prefix*1
–
#119
Trunk
Main menu:
“Set date & time”
Sub-menu 1
Sub-menu 2
Memo alarm
Alarm1–3
–
Time adjustment*1, *9
Main menu:
Settings
–
Date and time*1
Code
–
#101
15
Once
Daily
Weekly

#720
43

Manual
#226
–
“Speed dial”
Operation
Code
Viewing the speed dial entry.
#261
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
39
2013/12/03
14:54:37
35
39
Programming
Main menu:
“Settings”
Sub-menu 1
Sub-menu 2
Settings
Code
Ring adjustments
Ringer volume
– Handset*4
Off–6 <6>
#160
–
Ringer volume
– Base unit*1, *4
Off–6 <1>
#G160
–
Ringer tone*4, *8, *10
(Handset)

#161
–
Interrupt tone
– Handset*11

Off
#201
24
Interrupt tone
– Base unit*1, *3, *11

Off
#G201
29
Silent mode
– Handset
On/Off
– On
–
#238
44
Start/End
– <11:00 PM/
06:00 AM>
#237
44
Select group
#241
44
On/Off
– On
–
#G238
44
Start/End
– <11:00 PM/
06:00 AM>
#G237
44
Select group
#G241
44
#101
15
Silent mode
– Base unit*1, *3
Set date & time
Talking Caller ID
40
–
Date and time*1
Memo alarm
– Alarm1–3
Once
Daily
Weekly

#720
43
Time adjustment*1, *9

Manual
#226
–
Handset

Off
#162
48
Base unit*1
On

#G162
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
40
2013/12/03
14:54:37
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
Key detector
setting*12
– 1: Add new
device
(for Detector1)*13
– 2: Add new
device
(for Detector2)
– 3: Add new
device
(for Detector3)
– 4: Add new
device
(for Detector4)
Change name*1
Detector1
#6561
Detector2*14
#6562*15
Detector3*14
#6563*15
Detector4*14
#6564*15
Registration
–
#6571
–
–
#6572*15
#6573*15
#6574*15
Deregistration
–
#6581
–
#6582*15
#6583*15
#6584*15
Call
block*1
Block a single
number
–
Block range of
numbers
–
#217
45
Block unknown CID
(CID: Caller ID)
On

#240
46
First ring

Off
#173
46
Speed dial
–
–
#261
35
Cell locator
–
–
#248
30
Record greeting*1
–
–
#302
15
–
#331
62

Off
#332
62
Level 1–4 <2>
#145
–
#104
46
#105
46
#278
16
#165
–
Voice mail*4
Save VM access#*1
(VM: Voice mail)
VM tone detect*1
LCD contrast
(Display contrast)
–
Handset name
–
Display name
–
Smart function
key
–
Key tone
–
–
On

–

Off
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
41
2013/12/03
14:54:37
41
Programming
Settings
Code
Caller ID edit
(Caller ID number auto
edit)
Sub-menu 1
Sub-menu 2
–

Off
#214
49
Auto talk*16
–
On

#200
22
Set dial mode*1
Pulse

#120
16
Set flash time*1, *17
900 ms
<700 ms>
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms
80 ms
#121
23
Set line mode*1, *18
A
#122
–

Off
#194
23,
28
Set tel line*4
–
Call sharing*1
Registration
Register handset
–
#130
47
Deregistration*2
–
#131
47

Off
#152
25
Display

Español
#110
15
Voice prompt*1

Español
#112
15
Power failure
–
Change language
Main menu:
“Customer support”
Operation
Code
Displaying customer support Web address.
Main menu:
“Key
#680
Sub-menu 2
Sub-menu 1
Settings
Code
Search
–
–
Battery check
–
–
*1
42
–
detector”*12
#655
–
If you program these settings using one of the units, you do not need to program the same
item using another unit.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
42
2013/12/03
14:54:37
Programming
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
*15
*16
*17
*18
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
KX-TGE270 series: page 3
When the cellular line only mode is turned on, these menus are not displayed (page 19).
After the Bluetooth device is paired, the device name is displayed.
For CELL 1
For CELL 2
The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
3). If you select a melody, you cannot distinguish lines by their ringers.
This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “On”, the tone sounds 2 times.
This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
For models with supplied key detectors, the display shows “1: Detector1”.
If you register 2 or more key detectors.
If you have 2 or more key detectors.
If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
MMENUN#720
Select an alarm by pressing 1 to 3. a
MSELECTN
MbN: Select the desired alarm option. a
MSELECTN
“Off”
Turns alarm off. Go to step 10.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
43
2013/12/03
14:54:37
43
Programming
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press MSELECTN. a MOKN
Set the desired time.
*: Select “AM” or “PM”. a MOKN
Enter a text memo (10 characters max.).
a MOKN
MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MbN: Select the desired snooze setting.
a MSAVEN
10
MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, M
N, or MSNOOZEN to
stop the sound but keep the snooze
function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
R We recommend turning the base unit ringer
off (page 38, 40) in addition to turning the
silent mode on. (KX-TGE260 series: page 3)
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
For handset setting: MMENUN#238
For base unit setting (using a
handset)*1: MMENUN#*238
MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
exit.
Enter the desired hour and minute you
wish to start this feature.
*1
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 33), you can also select groups of
callers whose calls override silent mode and
ring the handset (Caller ID subscribers only).
44
*: Select “AM” or “PM”.
MSAVEN a MOFFN
KX-TGE270 series: page 3
Changing the start and end time
For handset setting: MMENUN#237
For base unit setting (using a
handset)*1: MMENUN#*237
Continue from step 3, “Turning silent
mode on/off”, page 44.
KX-TGE270 series: page 3
*1
Silent mode
*: Select “AM” or “PM”. a MOKN
Enter the desired hour and minute you
wish to end this feature.
Selecting groups to bypass silent
mode
For handset setting: MMENUN#241
For base unit setting (using a
handset)*1: MMENUN#*241
Select your desired groups by pressing
1 to 9.
R “ ” is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. “ ” disappears.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
44
2013/12/03
14:54:37
Programming
*1
MSAVEN a MOFFN
KX-TGE270 series: page 3
Call block
This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (250 max.).
– “Block a single number”: The unit
can reject calls from specific phone
numbers.
– “Block range of numbers”: The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly*1
while caller information is being received. If
the caller’s phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 46).
Important:
R Rejected calls are logged in the caller list.
Storing a single phone number
MCN CID
MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press *
repeatedly until the phone number is
shown in the 10-digit format.
MCN CID
MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 4.
MbN: “Save CID” a MSELECTN
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
MbN: “Yes” a MSELECTN
Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
When a cellular phone is not paired:
Storing unwanted callers
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
When a cellular phone is paired:
MSAVEN
MbN: “Call block” a MSELECTN
MMENUN#217
MbN: “Block a single number” a
MSELECTN
MMENUN a MbN: “Add” a MSELECTN
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
MSAVEN a MOFFN
Storing a range of numbers
MMENUN#217
MbN: “Block range of numbers” a
MSELECTN
MMENUN a MbN: “Add” a MSELECTN
Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
45
2013/12/03
14:54:37
45
Programming
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
MMENUN#240
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call
block list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
MMENUN#173
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
MMENUN#217
MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
MbN: Select the desired entry.
R To exit, press MOFFN.
To edit a number:
MEDITN a Edit the number. a MSAVEN
a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
46
Erasing all call block numbers
MMENUN#217
MbN: “Block a single number” or
“Block range of numbers” a
MSELECTN
MMENUN a MbN: “Erase all” a
MSELECTN
MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Other programming
Changing the handset name
The default handset name is “Handset 1” to
“Handset 6”. You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 46).
MMENUN#104
Enter the desired name (10 characters
max.).
MSAVEN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
MMENUN#105
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
46
2013/12/03
14:54:37
Programming
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
Handset:
MMENUN#130
Base unit:
Press and hold MLOCATORN or
MHANDSET LOCATORN for about 5
seconds.
R If all registered handsets start ringing,
press MLOCATORN or MHANDSET
LOCATORN again to stop, then repeat
this step.
Handset:
Press MOKN, then wait until a long beep
sounds.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
MMENUN#131
R All handsets registered to the base unit
are displayed.
MbN: Select the handset you want to
cancel. a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
47
2013/12/03
14:54:37
47
Caller ID Service
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private caller”: The caller
requests not to send caller information.
– “Long distance”: The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows “Missed
call”.
Note:
R Even when there are unviewed missed
calls, “Missed call” disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
48
Talking Caller ID
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your
service provider/telephone company.
– turn this feature on (page 40).
When caller information is received, the
handsets and/or base unit announce the
caller’s name or phone number received from
your service provider/telephone company
following every ring.
The unit announces in English only.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long, the unit may not be able
to display or announce the entire name.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Caller list
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
Viewing the caller list and calling
back
n Using a cellular line
MCN CID
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
To call back, press MSELECTN.
To exit, press MOFFN.
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
48
2013/12/03
14:54:37
Caller ID Service
– a specific line is set to make cellular
calls (page 20).
MbN: Select the desired cellular phone. a
MSELECTN
n Using the landline
MCN CID
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
To call back, press M
N.
To exit, press MOFFN.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed.
or
indicates the caller information
was received from the cellular line.
Using the Smart function key
When “Missed call” is displayed and the
indicator flashes slowly, there are missed
calls.
Press M
N in step 1 on “Viewing the caller
list and calling back”, page 48.
R “Missed Call” must be set to “On” in
“Setting the Smart function key”, page 16.
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
view the caller list after pressing M
N.
R When the unit has new messages, new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
n When a cellular phone is paired:
1 MCN CID
MbN: Select the desired entry. a
MSELECTN
Press * repeatedly until the phone
number is shown in the desired format.
Using a cellular line:
To make a cellular call, continue from
step 4, “Viewing the caller list and
calling back”, page 48.
Using the landline:
n When a cellular phone is not paired:
1 MCN CID
MbN: Select the desired entry. a
MMENUN
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format.
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit
(page 42). The default setting is “On”.
Note:
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
49
2013/12/03
14:54:38
49
Caller ID Service
Erasing selected caller
information
MCN CID
MbN: Select the desired entry.
MERASEN a MbN: “Yes” a MSELECTN
MOFFN
Erasing all caller information
50
MCN CID
MERASEN a MbN: “Yes” a MSELECTN
MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
50
2013/12/03
14:54:38
Using Bluetooth Devices
Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R If your cellular phone includes international
call entries, set the conversion codes
before copying (page 51).
Handset:
MMENUN#618
Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a
MSELECTN
R Copied items are stored to the group
(“Cell 1” or “Cell 2”) which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
When “Use the cell to
transfer phone book” is displayed:
Go to step 4.
When “Select mode” menu is
displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the
cellular phone automatically. Go to step 5.
“Manual”: Copy entries you selected.
R “Select mode” menu is displayed
only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
R Some cellular phones may require you
to perform an operation on the cellular
phone even if you select “Auto”.
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R For other cellular phones (not paired),
you need to search for and select the
base unit. The Bluetooth PIN (default:
“0000”) may be required. If your
cellular phone shows PassKey
confirmation on its display, follow the
directions to proceed.
R The entries being copied are displayed
on the handset.
Handset:
Wait until “Completed” is displayed.
R You can continue copying other entries
if necessary.
Handset: MOFFN
Note:
R Some copied entries may have characters
which do not exist in the character table
(page 32). These characters can be
displayed but cannot be entered when
editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “H”.
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes
before transferring the phonebook from your
cellular phone (each 4 digits max.).
– “International code”: An international
prefix used when you make an international
call.
– “Country code”: Your country code for
international calls.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
51
2013/12/03
14:54:38
51
Using Bluetooth Devices
– “Trunk prefix”: A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
R Refer to your cellular phone operating
instructions for information on how to install
applications.
Setting text message (SMS) alert
MMENUN
To store “International code”:
#117
To store “Country code”: #118
To store “Trunk prefix”: #119
Enter the desired number. a MSAVEN
MOFFN
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Text message (SMS) alert
The handset can notify you when a cellular
phone that is paired to the base unit receives
a text message. The handset can notify you
by briefly displaying a message, by sounding
a ringer tone or melody, and by
announcement. The announcement is in
English only.
Important:
R To use the text message alert feature, you
need to pair your cellular phone to the base
unit (page 17).
R Your cellular phone must support Message
Access Profile (MAP) specification. We
recommend that you confirm if your cellular
phone supports MAP in advance.
R For more details and the list of compatible
cellular phones, please visit our Web site:
http://www.panasonic.com/link2cell
For those whose devices do not support
the Message Access Profile (MAP):
By installing the app “Text Message Alert”,
you can use the text message alert feature.
Please visit our Web site:
http://www.panasonic.net/pcc/support/tel/sms/
52
The following settings are available. The
default is “On(no announce)”.
– “On(no announce)”: The handset
notifies you but does not make an
announcement.
– “On(with name)”: The handset notifies
you and announces the name of the
message sender.
– “Off”: The handset does not notify you.
Your cellular phone
In order to use the text message alert feature,
you may need to enable your cellular phone’s
Bluetooth notification feature.
Handset
n Turning text message (SMS) alert on/off
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: “On/Off” a MSELECTN
MbN: Select the desired setting.
MSAVEN a MOFFN
n Selecting the alerting tone
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: “Alert tone” a MSELECTN
MbN: Select the desired setting.
MSAVEN a MOFFN
Note:
R If the text message alert feature does not
work, you must turn on notifications in the
Bluetooth settings of your cellular phone.
Then, unplug the base unit’s AC adaptor
and reconnect it to activate the text
message alert feature. For instructions on
how to do this, visit our Web site:
http://www.panasonic.net/pcc/support/tel/
sms/
R The unit announces the name stored in
your cellular phone. If a name is not stored
in your cellular phone, the unit will
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
52
2013/12/03
14:54:38
Using Bluetooth Devices
announce the name stored in the unit,
depending on the cellular phone.
R This feature may not pronounce all names
correctly.
R Text message alerts are not logged in the
caller list of your unit.
Using a Bluetooth wireless
headset (optional) for
landline calls
Press MOKN, then wait until a long beep
sounds.
MOFFN
R When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R 1 headset can be paired to the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MOFFN
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
Handset:
MMENUN#621
If your headset PIN is “0000”, go to
step 4.
If your headset PIN is other than
“0000”, press MCLEARN, then enter your
headset PIN.
R Typically, default PIN is “0000”. Refer
to the headset operating instructions.
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
MMENUN#612
MbN: “Yes” a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
MOFFN
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
53
2013/12/03
14:54:38
53
Using Bluetooth Devices
Note:
R If you cannot hang up the call using your
headset:
– press M
N (STOP) on the base unit.
(KX-TGE260 series: page 3)
– press MZN on the base unit 2 times.
(KX-TGE270 series: page 3)
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TGE270 series: page 3)
– during an intercom call between the base
unit and handset. (KX-TGE270 series:
page 3)
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Turn on the headset referring to your
headset operating instructions.
n To switch to the base unit (KX-TGE270
series: page 3):
Press MZN on the base unit.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 42).
n While the handset is on a landline call:
To join the conversation with your headset,
turn on the headset referring to your
headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
N.
press M
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
54
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
54
2013/12/03
14:54:38
Answering System for Landline
Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 60).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The message counter on the base unit
flashes if the answering system is turned
on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Handset
To turn on:
MMENUN#327
To turn off:
MMENUN#328
MOFFN
Note for base unit and handset:
R When the answering system is turned on,
the message counter on the base unit
displays the total number of messages (old
and new).
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
MMENUN#302
MbN: “Yes” a MSELECTN
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
Press MSTOPN to stop recording. a
MOFFN
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 60)
is set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
55
2013/12/03
14:54:38
55
Answering System for Landline
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
MMENUN#304
MYESN a MOFFN
Playing back the greeting
message
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded,
“New message” is displayed.
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
When finished, press MOFFN.
MMENUN#303
Note:
To exit, press MOFFN.
R To switch to the receiver, press M
N.
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
Listening to messages
Using the base unit
When new messages have been recorded,
N on the base unit flashes.
Press M
N (PLAY).
R During playback, M
N on the base unit
lights.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Using the Smart function key
When “New message” is displayed and the
indicator flashes slowly, there are new
messages.
Press M
N in step 1 on “Using the handset”,
page 56.
R “New message” must be set to “On” in
“Setting the Smart function key”, page 16.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key
Operation
MjN or MkN
Adjust the receiver/speaker
volume (during playback)
Key
Operation
MjN or MkN
Adjust the speaker
volume
1 or MFN
Repeat message (during
playback)*1
Repeat message*1
2 or MEN
Skip message
Skip message (during
playback)
N (STOP)
Stop playback
Enter the “Settings” menu
Erase currently playing
message
Play new messages
Play all messages
Play greeting message
76
Record greeting message
MERASEN
*1
56
If pressed within the first 5 seconds of a
message, the previous message is
played.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
56
2013/12/03
14:54:38
Answering System for Landline
Key
Operation
Turn answering system on
MPAUSEN
Pause message*2
9 or
MSTOPN
Stop recording
Stop playback
Turn answering system off
*4*3
Erase currently playing
message
*5
Erase all messages
*6
Reset to a pre-recorded
greeting message
*1
If pressed within the first 5 seconds of a
message, the previous message is
played.
To resume playback:
MbN: “Playback” a MSELECTN
You can also erase as follows:
MPAUSEN a MbN: “Erase” a
MSELECTN a MbN: “Yes” a MSELECTN
*2
*3
Calling back (Caller ID subscribers
only)
n Using a cellular line:
1 Press MPAUSEN during playback.
MbN: “Call back (Cell)” a
MSELECTN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
MbN: Select the desired cellular phone.
a MSELECTN
n Using the landline:
1 Press MPAUSEN during playback.
MbN: “Call back” a MSELECTN
Editing the number before calling back
Press MPAUSEN during playback.
MbN: “Edit & Call” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 49). a M
R To call back using a cellular line,
continue from step 2, “Making cellular
calls”, page 21.
Erasing all messages
MMENUN#325
MbN: “Yes” a MSELECTN a MOFFN
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the “Base unit beep”
setting is turned on. The default setting is
“Off”.
MMENUN#339
MbN: Select the desired setting. a
MSAVEN a MOFFN
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 58).
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
57
2013/12/03
14:54:38
57
Answering System for Landline
Storing a phone number to which the
unit makes an alert call
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
R The new message alert setting is
turned off.
n From the phonebook:
1 MMENUN#338
MbN: “Notification to” a
MSELECTN a MADDN
Activating/inactivating the remote
access code to play messages
MbN: “Phonebook” a MSELECTN
If you activate this feature, you must enter the
remote access code (page 59) to play the
new message from the new message alert
call. This is so that unauthorized parties
cannot listen to your messages. The default
setting is “Inactivate”.
– “Inactivate”: You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– “Activate”: You must enter your remote
access code and then press 4 to play new
message.
MbN: Select the desired phonebook
entry. a MSAVEN a MOFFN
n By entering a phone number:
1 MMENUN#338
MbN: “Notification to” a
MSELECTN a MADDN
MbN: “Manual” a MSELECTN
Enter the desired name (16 characters
max.). a MOKN
Enter the desired number (24 digits
max.). a MOKN a MSELECTN a
MOFFN
Turning on/off the new message alert
setting
58
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#338
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#338
MbN: “Notification to” a MSELECTN
MMENUN a MbN: “Edit” a MSELECTN
Edit the name if necessary (16 characters
max.). a MOKN
Edit the phone number if necessary (24
digits max.). a MOKN a MSELECTN a
MOFFN
Erasing the set phone number
MMENUN#338
MbN: “Remote code” a MSELECTN
MbN: “On/Off” a MSELECTN
Editing the set phone number
MMENUN#338
MbN: “Notification to” a MSELECTN
n When the remote access code is set to
“Inactivate”:
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
“Activate”:
Enter the remote access code
(page 59) during the announcement.
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
58
2013/12/03
14:54:38
Answering System for Landline
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
MMENUN#306
Enter the desired 3-digit remote access
code.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 59).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key
Operation
Repeat message (during
playback)*1
Deactivating remote operation
Skip message (during playback)
Press * in step 2 on “Remote access code”,
page 59.
R The entered remote access code is deleted.
Play new messages
Play all messages
Stop playback*2
Start voice guidance*3
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*#
End remote operation
(or hang up)
MSAVEN a MOFFN
Using the answering system
remotely
Dial your landline phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 59).
*1
When finished, hang up.
*2
*3
If pressed within the first 5 seconds of a
message, the previous message is
played.
For English voice guidance only
For Spanish voice guidance only
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
59
2013/12/03
14:54:38
59
Answering System for Landline
Turning on the answering system
remotely
Dial your phone number from a
touch-tone phone.
Let the phone ring 15 times.
R A long beep is heard.
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 59).
Answering system settings
Call screening
Handset / Base unit*1
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press MjN or
MkN repeatedly.
You can answer the call by pressing M
N on
the handset or MZN on the base unit *1.
Call screening can be set for each unit. The
default setting is “On”.
For handset setting: MMENUN#310
For base unit setting (using a
handset)*1: MMENUN#*310
MbN: Select the desired setting. a
MSAVEN a MOFFN
*1 KX-TGE270 series: page 3
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
The default setting is “4 rings”.
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
60
messages. If you call your phone from outside
to listen to new messages (page 59), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
For voice mail service subscribers
If you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
calls, please note the following:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 55).
R To use this unit’s answering system rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone company
cannot do this:
– Set this unit’s “Ring count” setting so
that this unit’s answering system
answers calls before the voice mail
service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 min”.
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
60
2013/12/03
14:54:38
Answering System for Landline
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting only” in step 2 on
“Caller’s recording time”, page 60.
Note:
R When you select “Greeting only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 55).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
61
2013/12/03
14:54:38
61
Useful Information
Example:
Voice mail service for
landline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
Important:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 55).
For details, see page 60.
Storing the voice mail (VM)
access number
In order to listen to your voice mail messages,
you must dial your service provider/telephone
company’s voice mail access number. Once
you have stored your voice mail access
number, you can dial it automatically
(page 63).
MMENUN#331
Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voice mail access
number and your mailbox password, press
MDN (Pause) to add pauses (page 22)
between the access number and the
password as necessary. Contact your
service provider/telephone company for the
required pause time.
1-222-333-4444
VM access
number
Pauses
8888
Password
To erase the voice mail access
number
MMENUN#331
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Voice mail (VM) tone detection
Handset / Base unit*1
*1
KX-TGE270 series: page 3
Your service provider/telephone company
sends special signals (sometimes called
“voice mail tones” or “stutter tones”) to the unit
to let you know you have new voice mail
messages. If you hear a series of dial tones
followed by a continuous dial tone after you
N on the handset or press MZN on
press M
the base unit, you have new voice mail
messages. Soon after you hang up a call or
after the phone stops ringing, your unit checks
the phone line to see if new voice mail
messages have been recorded.
Turn this feature off when:
– You do not subscribe to voice mail service.
– Your service provider/telephone company
does not send voice mail tones.
– Your phone is connected to a PBX.
If you are not sure which setting is required,
contact your service provider/telephone
company.
Turning VM tone detection on/off
The default setting is “On”.
62
PPPP
MMENUN#332
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
62
2013/12/03
14:54:38
Useful Information
Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following way:
– “Voice mail msg. via phone co.”
is displayed if message indication service is
available.
Handset
MMENUN#330
R The speakerphone turns on.
Follow the pre-recorded instructions.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
1 AC adaptor cord
When finished, press MOFFN.
Note:
R You can also use the MACCESSN soft key,
if displayed, to play new voice mail
messages.
R If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
Base unit*1
*1
KX-TGE270 series: page 3
To listen to voice mail messages, you have to
dial your voice mail access number manually.
Using the Smart function key
When “Voice mail msg. via phone
co.” is displayed and the
indicator
flashes slowly, there are new voice mail
messages.
Press M
N in step 1 on “Listening to voice
mail messages”, page 63.
R “New VM” must be set to “On” in “Setting
the Smart function key”, page 16.
R When the unit has new messages, new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
63
2013/12/03
14:54:39
63
Useful Information
Insert the hooks on the wall mounting
adaptor into holes (1) and (2) on the
base unit.
3 102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs
for (4) and (5) respectively.
Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
To remove the wall mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
64
Mount the unit on a wall then slide down
to secure in place.
1 AC adaptor cord
R This product is compliant with the
following wall phone plate sizes (2
types).
2 83 mm (3 1/4 inches)
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
64
2013/12/03
14:54:39
Useful Information
Charger
Drive the screws (1) (not supplied) into the
wall.
2 27.2 mm (1 1/16 inches)
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
65
2013/12/03
14:54:39
65
Useful Information
Error messages
Display message
Cause/solution
Ask phone
company for
VM access #
R You have not stored the voice mail access number.
Store the number (page 62).
Base no power
or
No link. Reconnect base
AC adaptor.
or
No link.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 47).
R When “No link.” is displayed during a power
failure, place a handset on the base unit to supply
power to the base unit.
Busy
R No cellular phone is paired to the base unit. Pair a
cellular phone (page 17).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Check tel line
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).
R If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 19).
Error!!
R Recording was too short. Try again.
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 51). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed
R Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R There is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 47).
66
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
66
2013/12/03
14:54:39
Useful Information
Display message
Cause/solution
Requires
subscription
to Caller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Use
rechargeable
battery.
R A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 7.
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
R Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
I cannot pair a cellular phone to
the base unit.
R Depending on the compatibility of the cellular phone, you
may not be able to pair it to the base unit. Confirm that
your cellular phone supports the hands-free profile (HFP)
specification.
R Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from your cellular phone.
R Some cellular phones may require you to enter the
Bluetooth PIN to pairing. Confirm that you entered the
correct PIN.
Make sure the batteries are installed correctly (page 10).
Fully charge the batteries (page 11).
Check the connections (page 10).
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset has not been registered to the base unit.
Register the handset (page 47).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
67
2013/12/03
14:54:39
67
Useful Information
Problem
Cause/solution
I cannot connect a cellular
phone to the base unit.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit range
(page 13).
R Your cellular phone’s Bluetooth feature is turned off. Turn
it on.
R Depending on the state of the wireless environment, such
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 19).
R The cellular phone has not been paired to the base unit.
Pair the cellular phone (page 17).
I cannot hear a dial tone.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider/telephone company.
I cannot use the Smart function
key even if the
indicator is
flashing slowly.
R Another unit is in use. Wait and try again later.
The base unit beeps.
R New messages have been recorded. Listen to the new
messages (page 56).
Menu list
Problem
Cause/solution
The display is in a language I
cannot read.
R Change the display language (page 15).
I cannot register a handset to a
base unit.
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 47).
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 11).
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to
be shorter.
R Clean the battery ends ( ,
) and the charge contacts
with a dry cloth and charge again.
R It is time to replace the batteries (page 10).
68
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
68
2013/12/03
14:54:39
Useful Information
Making/answering calls, intercom
Problem
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 47).
is displayed.
Noise is heard, sound cuts in
and out.
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset or base unit does
not ring.
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 40).
R The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 38).
R When one handset is selected to ring for cellular calls,
other units do not ring. To change the selection, see
page 18.
R Silent mode is turned on. Turn it off (page 44).
I cannot make local calls with
the handset or base unit using
a cellular line.
R You need to add your area code when making cellular
calls. Store your area code in order to automatically add it
to the beginning of the 7-digit phone number when
making cellular calls (page 20).
I cannot make or answer
cellular calls with the handset
or base unit.
R Depending on the cellular phone’s compatibility (page 5),
you may not be able to make or answer cellular calls even
if the cellular phone is connected to the base unit.
R Make sure that the CELL indicator lights up and the
cellular phone is connected to the base unit (page 19).
R Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
R The cellular phone is being used separately from your
system.
I can make and answer cellular
calls but cannot hear a sound.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
I cannot switch cellular calls
from the unit to the cellular
phone.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
I cannot make a call using the
landline.
R The dialing mode may be set incorrectly. Change the
setting (page 16).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
69
2013/12/03
14:54:39
69
Useful Information
Problem
Cause/solution
I cannot make or answer a call.
R An outside line is being used after a cell locator feature is
used.
– KX-TGE260 series: To end the call, press MLOCATES
CELLN on the base unit.
– KX-TGE270 series: To end the call if someone
answers using the cellular phone, press MZN on the
base unit.
I cannot use a cellular line or a
landline.
R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular
line).
I cannot make long distance
calls.
R Make sure that you have long distance service.
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your service provider/
telephone company for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is displayed
or announced late.
R Depending on your service provider/telephone company,
the unit may display or announce the caller’s information
at the 2nd ring or later.
R Move closer to the base unit.
70
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
70
2013/12/03
14:54:39
Useful Information
Problem
Cause/solution
Caller information is not
announced.
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 40).
R The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 38).
R When one handset is selected to ring for cellular calls,
other units do not announce caller information. To change
the selection, see page 18.
R The Talking Caller ID feature is turned off. Turn it on
(page 40).
R The ring as cell mode is set to “On (without Talking
CID)”. To change the mode, see page 18.
R The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting
(page 60).
R Your unit does not announce caller information if
– the base unit or 2 or more handsets are on a call.
– a headset is in use.
The caller list/incoming phone
numbers are not edited
automatically.
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 42).
R You need to call back the edited number to activate Caller
ID number auto edit.
I cannot dial the phone number
edited in the caller list.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 49).
Time on the unit has shifted.
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to “Manual”
(off) (page 40).
The 2nd caller’s information is
not displayed during an outside
call.
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
71
2013/12/03
14:54:39
71
Useful Information
Using Bluetooth devices
Problem
Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s phonebook, the
entry cannot be copied even by selecting another group.
I cannot have a conversation
using the headset.
R Confirm that the Bluetooth wireless headset supports the
HeadSet Profile (HSP) specification.
R Your Bluetooth headset is not paired. Pair it (page 53).
R Turn your headset off, then turn it on and try again.
Noise is heard during a call on
the headset.
R A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
I cannot connect my headset to
the base unit.
R Confirm that your headset is turned on.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
R The headset has not been paired to the base unit. Pair
the headset (page 53).
Some headset enhanced
features are not available.
R The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
72
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
72
2013/12/03
14:54:39
Useful Information
Problem
Cause/solution
Text message alerts are not
displayed or announced.
R Confirm that the cellular phone supports the Message
Access Profile (MAP) specification.
R Text message (SMS) alert is set to “On (no
announce)” or “Off”. Set it to “On (with name)”.
R The Bluetooth device’s Bluetooth notifications setting is
turned off.
R The handset selected to display and/or announce alerts is
in use.
R The Bluetooth device or its corresponding cellular line is
in use.
Answering system
Problem
Cause/solution
The unit does not record new
messages.
R The answering system is turned off. Turn it on (page 55).
R The answering system does not answer or record calls
from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 56).
R The recording time is set to “Greeting only”. Change
the setting (page 60).
R Your service provider/telephone company’s voice mail
service may be answering your calls before the unit’s
answering system can answer your calls. Change the
unit’s number of rings setting (page 60) to a lower value,
or contact your service provider/telephone company.
R The answering system will not answer incoming calls
while:
– the base unit or 2 or more handsets are on a cellular
call or an intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
I cannot operate the answering
system remotely.
R The remote access code is not set. Set the remote
access code (page 59).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 59).
R The answering system is turned off. Turn it on (page 60).
R You cannot operate the answering system when calling a
cellular phone paired to the base unit.
The unit does not emit the
specified number of rings.
R If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
73
2013/12/03
14:54:39
73
Useful Information
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R Change the PIN using the following method.
MMENUN#619
*7000
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
Voice mail
Problem
Cause/solution
“Voice mail msg. via
phone co.” is shown on the
handset display. How do I
remove this message from the
display?
R This notification is displayed when your service provider/
telephone company’s voice mail service (not the unit’s
answering system) has recorded a message for you.
Typically you can remove this notification from the display
by listening to the message. To listen to the message, dial
the voice mail number provided by your service provider/
telephone company (for most cases, this will be your own
phone number), and follow the voice instructions.
Depending on your service provider/telephone company,
you may need to remove all messages from your voice
mailbox to remove the notification. You can also remove
this notification by pressing and holding # until the unit
beeps.
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
74
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
74
2013/12/03
14:54:39
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
L Ringer Equivalence No. (REN).......0.1B
advised of your right to file a complaint with
the FCC if you believe it is necessary.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
75
2013/12/03
14:54:39
75
Useful Information
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
76
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body.
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
Notice:
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
76
2013/12/03
14:54:39
Useful Information
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
TIA-1083
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
77
2013/12/03
14:54:40
77
Guía Rápida Española
Guía Rápida Española
Conexiones
Unidad base
1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente.
2 Enganche el cable para fijarlo.
3 Conecte el adaptador de corriente alterna a la toma de corriente.
4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea
(RJ11C) hasta que escuche un clic.
5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Nota:
L Use solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.
Cargador
1 Conecte el adaptador de corriente alterna a la toma
de corriente.
78
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
78
2013/12/03
14:54:40
Guía Rápida Española
Instalación y carga de la batería
Cargue aproximadamente durante 7 horas.
Nota:
L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( 1 ).
L NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.
L Confirme que las polaridades estén correctas (S, T).
L Cambie el idioma de la pantalla.
L Confirme que aparezca “Cargando” (2).
Sugerencias de operación
Teclas de función
Al oprimir una tecla de función, puede seleccionar la
función que aparece directamente encima de ella en la
pantalla. Preste atención a la pantalla para ver qué
funciones están asignadas a las teclas de función durante
la operación.
Tecla navegadora
− {^}, {V}, {<}, o {>}: Navegue por diversas listas y
elementos.
− v (Volumen: {^} o {V}): Ajuste el volumen del receptor
{<}
o el altavoz mientras habla.
− {<} k: Vea la entrada del directorio telefónico.
− {>} REDIAL (Remarcación): Vea la lista de remarcación.
− {V} CID (identificador de llamadas): Vea la lista de
personas que llamaron.
{^}
{>}
{V}
Cambio de idiomas (Auricular) (predeterminado: “English”)
Cuando instale las baterías por primera vez, es posible que aparezca “Date and time Press SELECT”.
Oprima {OFF} para salir.
Idioma de la pantalla
{MENU}(11) s {r}: “Español” s {GUARDA} s {OFF}
Idioma de la guía de voz
{MENU}(112 s {r}: “Español” s {GUARDA} s {OFF}
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
79
2013/12/03
14:54:40
79
Guía Rápida Española
Fecha y hora (Auricular)
{MENU}(1)1
Introduzca el día, mes y año actuales. s {OK}
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
{GUARDA} s {OFF}
Cómo grabar el mensaje de saludo del contestador de llamadas para
la línea terrestre (Auricular)
Si utiliza un mensaje de saludo pregrabado, no es necesario que grabe su propio mensaje de saludo.
1 {MENU}(3)2 s {r}: “Sí” s {SELEC.}
2 Después de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20 cm
(8 pulgadas) y hable con claridad en el micrófono (máx. de 2 minutos).
3 Oprima {PARAR} para dejar de grabar. s {OFF}
Enlace a celular
Puede conectar su unidad base y teléfono celular usando la tecnología inalámbrica Bluetooth®, para poder
hacer o responder llamadas a su teléfono celular usando su sistema telefónico. Para obtener más detalles,
visite nuestro sitio web: http://www.panasonic.com/link2cell
L Coloque su teléfono celular cerca de la unidad base. Si su teléfono celular está demasiado cerca de la
unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le
recomendamos que coloque su teléfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.
1 Línea celular
2 Proveedores de servicios de telefonía celular
Marcas registradas
L La marca denominativa y los logotipos de Bluetooth® son marcas registradas de Bluetooth SIG, Inc. y
cualquier uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia.
80
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
80
2013/12/03
14:54:40
Guía Rápida Española
Enlace a celular
Cómo emparejar un teléfono celular con Bluetooth
Auricular:
Para CELL 1: {MENU}(6241
Para CELL 2: {MENU}(6242
L Después de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el
resto del procedimiento debe completarse en menos de 5 minutos.
2 Su teléfono celular:
Mientras el indicador de CELL correspondiente esté parpadeando, siga las instrucciones de su teléfono
celular para entrar al modo de emparejamiento.
L Dependiendo de su teléfono celular, es posible que le pida que introduzca el NIP de Bluetooth
(predeterminado: “0000”). Si su teléfono celular muestra la confirmación de la clave de paso en su
pantalla, siga las instrucciones para continuar.
3 Auricular:
Espere a que se emita un pitido largo.
L Es posible que tarde más de 10 segundos en completar el emparejamiento.
L Cuando el indicador del CELL correspondiente se ilumina, esto significa que el teléfono celular está
conectado a la unidad base. Ya está listo para hacer llamadas regulares de celular.
4 {OFF}
Nota:
L Asegúrese de que su teléfono celular está configurado para conectarse a este producto
automáticamente. Consulte las instrucciones de operación de su teléfono celular.
Unidad base: Indicadores de CELL
Estado
Significado
Encendido
Un teléfono celular está conectado. Listo para hacer o recibir llamadas
celulares.
Parpadeando
− La línea del celular se está usando.
− Las entradas del directorio telefónico se están copiando desde un
teléfono celular.
− La unidad base está buscando el teléfono celular emparejado.
− La unidad base está emparejando un teléfono celular.
− Una llamada de celular se pone en espera.
Parpadea rápidamente
Se está recibiendo una llamada de celular.
Luz apagada
− No hay un teléfono celular emparejado con la unidad base.
− No hay un teléfono celular conectado a la unidad base.
Auricular: enlace a elementos de la pantalla del celular
td
Se está usando una línea de celular.*1
L Cuando parpadea: la llamada celular se pone en espera.
L Cuando parpadea rápidamente: se está recibiendo una llamada celular.
*1 La línea o líneas celulares correspondientes se indican enseguida del elemento.
xd
Un teléfono celular está conectado.*1 Listo para hacer o recibir llamadas celulares.
L Cuando está apagado: no hay un teléfono celular conectado a la unidad base.
*1 La línea o líneas celulares correspondientes se indican enseguida del elemento.
uv
− Se está haciendo una llamada de celular en esa línea.
− La línea celular está seleccionada para la configuración.
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
81
2013/12/03
14:54:40
81
Guía Rápida Española
Enlace a celular
Cómo conectar o desconectar el teléfono celular
Conexión automática a dispositivos Bluetooth (teléfonos celulares o auricular)
La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexión. onsulte las
instrucciones de operación para cambiar el intervalo (predeterminado: “1 min”).
L Cuando se sincronizan 3 dispositivos con capacidad Bluetooth (2 teléfonos celulares y 1 auricular) a la
unidad base, sólo 2 dispositivos Bluetooth pueden usarse con la unidad a la vez, y la unidad base pierde
su conexión con otros dispositivos Bluetooth. Para restablecer la conexión a los dispositivos Bluetooth
automáticamente, deje encendida la conexión automática.
Cómo conectar o desconectar manualmente el teléfono celular
Si no va a utilizar el vínculo del teléfono celular emparejado a la función del celular temporalmente (por
ejemplo, si no quiere que la unidad timbre cuando su línea celular reciba una llamada), puede desconectar
su teléfono celular de la unidad base. Si desea usarlo de nuevo, reconecte el teléfono celular a la unidad
base.
L Aunque haya desconectado un teléfono celular emparejado de la unidad base, si lo coloca dentro del
alcance de la unidad base durante el intervalo de conexión automática, es posible que se conecte
automáticamente a la unidad base.
L Los teléfonos celulares desconectados no se desemparejan de la unidad base, así que no es necesario
emparejarlos de nuevo con ella.
1 Para conectarlo o desconectarlo:
Para CELL 1: {MENU}(6251 (Se emite un pitido largo.)
Para CELL 2: {MENU}(6252 (Se emite un pitido largo.)
2 {OFF}
Modo exclusivo para la línea celular (si no utiliza la línea terrestre) (Auricular)
Si no utiliza la línea terrestre, configure el modo exclusivo para la línea celular para usar esta unidad en
forma más conveniente.
L Si enciende el “Modo Lín. Cel.”, desconecte el cable de la línea telefónica de la unidad base. De lo
contrario no será posible activar el “Modo Lín. Cel.”.
1 {MENU}(157
2 Para encenderlo:
{r}: “Encendido” s {SELEC.} s {r}: “Sí” s {SELEC.}
Para apagarlo:
{r}: “Apagado” s {SELEC.}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas de celular
Marque el número telefónico. s {C}/{s}
Para hacer llamadas por la
línea terrestre
82
Marque el número telefónico. s {CEL.}
L Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir {C}/{s} en lugar de {CEL.}.
L Cuando solo hay 1 teléfono celular emparejado, la unidad
comienza a marcar.
Cuando hay 2 teléfonos celulares emparejados:
{r}: Seleccione el teléfono celular deseado. s {SELEC.}
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
82
2013/12/03
14:54:40
Guía Rápida Española
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para contestar llamadas
{C}/{s}/{w}
Para colgar
{OFF}
Para ajustar el volumen del
receptor o del altavoz
Oprima {+} o {-} repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de remarcación
{>} REDIAL s {r}: Seleccione el número telefónico deseado.
Para hacer una llamada celular:
Cuando solo 1 teléfono celular está emparejado: {CEL.}
Cuando 2 teléfonos celulares están emparejados:
{CEL.} s {r}: Seleccione el teléfono celular deseado. s
{SELEC.}
Para hacer una llamada terrestre:
{C}
Oprima {+} o {-} repetidamente para seleccionar el volumen
deseado mientras timbra.
Para ajustar el volumen del
timbre (línea de celular/línea
terrestre)
Cómo hacer y contestar llamadas (unidad base: serie KX-TGE270)
Para hacer llamadas de celular
{CELL 1}/{CELL 2} s Marque el número telefónico.
Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir {s} en lugar de {CELL 1}/{CELL 2}.
Para hacer llamadas por la
línea terrestre
{s} s Marque el número telefónico.
Para contestar llamadas
{s}
Para colgar
{s}
Para ajustar el volumen del
altavoz
Oprima {+} o {-} repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de remarcación
Para hacer una llamada celular: {CELL 1}/{CELL 2}
Para hacer una llamada terrestre: {s}
{REDIAL}
Oprima {+} o {-} repetidamente para seleccionar el volumen
deseado mientras timbra.
Para ajustar el volumen del
timbre (línea de celular/línea
terrestre)
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
83
2013/12/03
14:54:40
83
Guía Rápida Española
Operaciones básicas
Directorio telefónico (Auricular)
Para añadir entradas
Para hacer llamadas
{<} k s {MENU}
{r}: “Agregar Ent. Nueva” s {SELEC.}
Introduzca el nombre de la persona (máx. 16 caracteres). s {OK}
Introduzca el número telefónico de la persona (máx. 24 dígitos). s
{OK}
{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s
{OFF}
{<} k s {r}: Seleccione la entrada deseada.
Para hacer una llamada celular:
Cuando solo 1 teléfono celular está emparejado: {CEL.}
Cuando 2 teléfonos celulares están emparejados:
{CEL.} s {r}: Seleccione el teléfono celular deseado. s
{SELEC.}
Para hacer una llamada terrestre:
{C}
Contestador de llamadas de la línea terrestre (Unidad base)
Contestador encendido/
apagado
Oprima {ANSWER ON/OFF} para encender y apagar el contestador
de llamadas.
Para escuchar mensajes
{P} (PLAY)
Contestador de llamadas de la línea terrestre (Auricular)
Para escuchar mensajes nuevos:
{REPRO.} o {MENU}(323
Para escuchar todos los mensajes:
{MENU}(324
Para escuchar mensajes
84
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
84
2013/12/03
14:54:40
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia
del directorio telefónico)
Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros
teléfonos celulares (no emparejados) al directorio telefónico de la unidad.
1 Auricular: {MENU}(618
2 Auricular:
Para copiar desde teléfonos celulares emparejados:
{r}: Seleccione el teléfono celular deseado. s {SELEC.}
L Los elementos copiados se almacenan en el grupo (“Cel. 1” o “Cel. 2”) en el que está emparejado
el teléfono celular.
Para copiar desde otros teléfonos celulares (no emparejados):
{r}: “Otro celular” s {SELEC.} s {r}: Seleccione el grupo al que desea copiar. s {SELEC.}
3 Cuando aparezca “Transf. datos del directorio del celular” : Vaya al paso 4.
Cuando aparezca el menú “Selec. modo” :
{r}: Seleccione “Auto” o “Manual”. s {SELEC.}
“Auto”: Descargue todas las entradas del teléfono celular automáticamente. Vaya al paso 5.
“Manual”: Copie las entradas que seleccionó.
L El menú “Selec. modo” aparece solo cuando el teléfono celular soporta PBAP (Perfil de Acceso a
Directorio Telefónico) para la conexión Bluetooth.
4 Teléfono celular:
Siga las instrucciones de su teléfono celular para copiar las entradas del directorio telefónico.
L Para otros teléfonos celulares (no emparejados), necesita buscar y seleccionar la unidad base. Quizás
requiera el NIP de Bluetooth (predeterminado: “0000”). Si su teléfono celular muestra la confirmación
de la clave de paso en su pantalla, siga las instrucciones para continuar.
L Las entradas que se están copiando aparecen en el auricular.
5 Auricular:
Espere a que aparezca “Completo”. s {OFF}
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
85
2013/12/03
14:54:40
85
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre
Al emparejar un audífono Bluetooth con la unidad base, podrá tener conversaciones inalámbricas a manos
libres para llamadas terrestres.
L Solo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 líneas
celulares o el auricular y 1 línea celular).
Cómo emparejar un audífono con la unidad base
1 Su audífono:
Configure su audífono en modo de emparejamiento.
L Consulte las instrucciones de operación de su
audífono.
2 Auricular:
{MENU}(621
1 Empareje usando el auricular.
2 Emparejamiento
Si el NIP de su audífono es “0000”, vaya al paso 4.
Si el NIP de su audífono es diferente a “0000”, oprima {BORRAR} y después introduzca el NIP de su
audífono.
L Por lo general, el NIP predeterminado es “0000”. Consulte las instrucciones de operación del
audífono.
Oprima {OK}, y después espere a que se emita un pitido largo. s {OFF}
L Cuando el indicador HEADSET de la unidad base se ilumina, usted está listo para usar el audífono.
Cómo operar un audífono inalámbrico con Bluetooth usando una línea terrestre
Consulte las instrucciones de operación de su audífono para ver cómo funciona.
N Cómo contestar llamadas de la línea terrestre con su audífono
Para contestar una llamada de línea terrestre, encienda su audífono. Para ello, consulte las instrucciones
de operación de su audífono.
Cuando termine de hablar, apague su audífono. Para ello, consulte las instrucciones de operación de su
audífono.
L Si no puede colgar la llamada usando su auricular:
− oprima {P} (STOP) en la unidad base. (serie KX-TGE260)
− oprima {s} en la unidad base 2 veces. (serie KX-TGE270)
N Cómo cambiar entre la unidad base y su audífono
Puede cambiar entre la unidad base y su audífono:
− durante una llamada por una línea terrestre con el altavoz de la unidad base. (Serie KX-TGE270)
− durante una llamada de intercomunicador entre la unidad base y el auricular. (Serie KX-TGE270)
− mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.
N Para cambiar a su audífono:
Encienda el audífono. Para ello, consulte las instrucciones de operación de su audífono.
N Para cambiar a la unidad base (serie KX-TGE270):
Oprima {s} en la unidad base.
86
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
86
2013/12/03
14:54:40
Guía Rápida Española
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece _?
L El auricular está demasiado lejos de la unidad base. Acérquelo.
L El adaptador para corriente de la unidad base no está conectado
correctamente. Conecte de nuevo el adaptador para corriente a la unidad
base.
L El auricular no está registrado en la unidad base. Regístrelo.
1 Auricular: {MENU}(13)
2 Unidad base: Oprima y mantenga oprimido {LOCATOR} o
{HANDSET LOCATOR} durante aproximadamente 5 segundos.
3 Auricular: Oprima {OK}, y después espere hasta que suene un
pitido largo.
¿Por qué no es posible
emparejar un teléfono celular
con la unidad base?
L Dependiendo de la compatibilidad del teléfono celular, es posible que no
pueda emparejarlo con la unidad base. Para obtener más información,
visite http://www.panasonic.com/link2cell
L Confirme que la función de Bluetooth de su teléfono celular esté
encendida. Es posible que necesite encender esta función dependiendo
de su teléfono celular.
¿Por qué no se escucha el
tono de marcación? (línea
celular)
L Asegúrese de que el indicador de CELL se ilumine y de que el teléfono
celular esté conectado a la unidad base.
L El teléfono celular no se ha emparejado con la unidad base. Empareje el
teléfono celular.
¿Cómo se incrementa el nivel
de volumen del auricular?
L Oprima la tecla de volumen {+} repetidamente mientras habla.
¿Por qué hay ruido o se corta
la conversación?
L Trate de reubicar la unidad base de forma que se minimice la distancia al
auricular.
L Si ocurre el mismo problema aunque el auricular se encuentre enseguida
de la unidad base,
visite: http://www.panasonic.com/support
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L Sí, puede añadir hasta 6 auriculares (incluyendo los que se venden con
su unidad base) a una sola unidad base.
L Para adquirir auriculares accesorios adicionales (KX-TGEA20),
visite: http://www.pstc.panasonic.com
Los usuarios TTY (usuarios con impedimentos auditivos o del habla)
pueden llamar al 1-866-605-1277.
¿Es posible mantener
cargando las baterías todo el
tiempo?
L Puede dejar el auricular en la unidad base o el cargador en cualquier
momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera (segunda
llamada)?
L Oprima {CALL WAIT} cuando escuche el tono de llamada en espera.
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés)
TGE26x27x(en)_1203_ver021.pdf
87
2013/12/03
14:54:40
87
Appendix
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Owner’s Manual online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic National Parts Center
20421 84th Avenue S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express.)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
88
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
88
2013/12/03
14:54:40
Appendix
Warranty (For United States and Puerto Rico)
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or
(c) refund your purchase price. The decision to repair, replace or refund will be made by
the warrantor.
Parts
Labor
One (1) Year
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During the
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your
product prepaid during the Limited Warranty period. This Limited Warranty excludes both
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited
Warranty only applies to products purchased and serviced in the United States or Puerto
Rico. This Limited Warranty is extended only to the original purchaser and only covers
products purchased as new.
Mail-In Service--Online
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
http://www.panasonic.com/repair
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a return
address and provide a day time phone number where you can be reached. P.O. Boxes
are not acceptable. Keep the tracking number for your records. A copy of valid
registered receipt is required under the 1 year parts and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
89
2013/12/03
14:54:40
89
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, lost calls or messages, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or after the
Limited Warranty period, you may contact your dealer or Service Center. If the problem is
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.
L Do not send your unit to Panasonic Corporation of North America listed on the back
cover or to executive or regional sales offices. These locations do not repair consumer
products.
90
For assistance, please visit http://www.panasonic.com/help
TGE26x27x(en)_1203_ver021.pdf
90
2013/12/03
14:54:40
Index
Index
3-way conference: 24, 28
Additional handset: 47
Alarm: 43
Answering calls: 22, 27
Answering system
Call screening: 60
Erasing messages: 56, 57, 59
Greeting message: 55
Greeting only: 60
Listening to messages: 56, 59
New message alerting: 57
Number of rings: 60
Recording time: 60
Remote access code: 59
Remote operation: 59
Ring count: 60
Toll saver: 60
Turning on/off: 55
Auto talk: 42
Battery: 10, 11
Bluetooth wireless technology
Cellular phone (Link to cell): 17
Headset: 53
Phonebook transfer: 51
Booster (Clarity booster): 23
Call block: 45
First ring: 46
Call share: 23, 28, 42
Call waiting: 23, 28
Call Waiting Caller ID: 23
Caller ID number auto edit: 42, 49
Caller ID service: 48
Caller list: 48
Caller list edit: 49
Cell locator: 30
Cellular calls: 21, 27
Cellular phone
Pairing: 17
Unpairing: 17
Chain dial: 34
CID (Caller ID): 48, 49
Conference calls: 24
Control type: 12
Customer support: 42
Date and time: 15
Dialing mode: 16
Direct command code: 36
Display
Contrast: 41
Language: 15
Eco mode: 11
Equalizer: 23
Error messages: 66
Flash: 23, 28, 42
Groups: 33
Handset
Deregistration: 47
Locator: 30
Name: 46
Registration: 47
Hold: 22, 28
Intercom: 30
Key detector: 41, 42
Key tone: 41
Landline calls: 21, 27
Line mode: 42
Link to cell
Area code: 20
Auto connection: 18
Cellular line only mode: 19
Cellular line selection: 20
Connection: 19
Ring as cell mode: 18
Select unit to ring: 18
Text message (SMS: Short Message
Service) alert: 52
Making calls: 21, 27
Missed calls: 48
Mute: 22, 28
Noise reduction: 23
Pause: 22, 27
Phonebook: 32
PIN: 20
Power failure (power back-up
operation): 25
Redialing: 21, 27
Ringer ID: 33
Ringer tone: 38, 40
Rotary/pulse service: 23
Silent mode: 44
Smart function key (NR key): 15
Speed dial: 35
SP-PHONE (Speakerphone): 21
Talking Caller ID: 48
Temporary tone dialing: 23, 28
Time adjustment: 40
Transferring calls: 24, 28
91
TGE26x27x(en)_1203_ver021.pdf
91
2013/12/03
14:54:40
Index
Troubleshooting: 67
TTY: 88
VM (Voice mail): 62
Voice guidance language: 15
Voice mail: 60, 62
Volume
Receiver: 21
Ringer (Base unit): 28, 38
Ringer (Handset): 22, 38, 40
Speaker: 21, 27
Wall mounting: 63
92
TGE26x27x(en)_1203_ver021.pdf
92
2013/12/03
14:54:40
Notes
93
TGE26x27x(en)_1203_ver021.pdf
93
2013/12/03
14:54:40
Notes
94
TGE26x27x(en)_1203_ver021.pdf
94
2013/12/03
14:54:40
Notes
95
TGE26x27x(en)_1203_ver021.pdf
95
2013/12/03
14:54:40
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
Visit our Web site: http://www.panasonic.com/help
L FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Two Riverfront Plaza, Newark, NJ 07102-5490
© Panasonic System Networks Co., Ltd. 2013
Printed in Malaysia
*PNQX6366ZA*
*PNQX6366ZA*
PNQX6366ZA
TGE26x27x(en)_1203_ver021.pdf
96
2013/12/03
14:54:40
TT1113WK0

Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-702 Create Date : 2013:12:03 14:52:51+09:00 Creator Tool : XSL Formatter V4.3 MR6i (4,3,2013,0121) for Windows Modify Date : 2013:12:10 19:27:54+09:00 Metadata Date : 2013:12:10 19:27:54+09:00 Format : application/pdf Description : KX-TGE260/KX-TGE262/KX-TGE263/KX-TGE264/KX-TGE270/KX-TGE272/KX-TGE273/KX-TGE274/KX-TGE275 Creator : Panasonic System Networks Co., Ltd. Title : Operating Instructions (English) Producer : Antenna House PDF Output Library 2.6.0 (Windows) Document ID : uuid:c9e73e20-18a9-4eb4-b510-fb07be0e6f23 Instance ID : uuid:26745eba-972c-4891-99e7-cd757ec7b0ec Page Count : 96 Subject : KX-TGE260/KX-TGE262/KX-TGE263/KX-TGE264/KX-TGE270/KX-TGE272/KX-TGE273/KX-TGE274/KX-TGE275 Author : Panasonic System Networks Co., Ltd.
EXIF Metadata provided by EXIF.tools

Panasonic of North America 96NKX-TGE270 DECT 6.0 Base with BT User Manual Operating Instructions English

Panasonic Corporation of North America DECT 6.0 Base with BT Operating Instructions English

Users Manual

FCC ID Filing: ACJ96NKX-TGE270

Navigation menu

Namespaces

Views

Navigation