Panasonic of North America 96NKX-WP1050A Wi-Fi Phone Handset for Skype Service User Manual

Panasonic Corporation of North America Wi-Fi Phone Handset for Skype Service

User manual

Please read these Operating Instructions before using the unit and save for future reference.Charge the handset battery for 6 hours before initial use.Operating InstructionsWi-Fi Phone for SkypeExecutive Travel SetModel No. KX-WP1050Temporary Confidential
Table of Contents2For assistance, please visit http://www.panasonic.com/phonehelpIntroductionFeature highlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Security caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Countries permitted to use this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9For best performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Symbols and screen used in these operating instructions . . . . . . . . . . . . . . . . . . . . . . . 17System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Getting StartedSetup flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Installing the base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21While you are at a hotel room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22While you are at home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Setting the base unit for the first time (Initialization Wizard) . . . . . . . . . . . . . . . . . . . . . 27Troubleshooting for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Setting up the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Base unit status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Powering on the handset (Signing in to Skype) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Handset displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Power screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Managing ContactsContacts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61Adding contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Searching for Skype contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Contacts list options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Viewing a contact profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Blocking contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Making/Answering CallsMaking calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Diverting calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Skype Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Useful features during a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Temporary Confidential
Table of ContentsFor assistance, please visit http://www.panasonic.com/phonehelp 3Managing HistoryHistory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Personal Skype Status and SettingsPersonal Skype status and profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Personal Skype settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Handset SettingsWi-Fi network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85ServicesService information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Handset LocatorRegistering the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Locating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Base Unit SettingsSetting the base unit from Top Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Updating the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Advanced Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Link for handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143Mode selector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Reset button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145Setting your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147Useful InformationAdditional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155FCC and other information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156Industry Canada (IC) and other information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158Règles d’Industrie Canada et autres renseignements . . . . . . . . . . . . . . . . . . . . . . . . . 159For European Union (EU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162Customer services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165IndexIndex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Temporary Confidential
Introduction4For assistance, please visit http://www.panasonic.com/phonehelpFeature highlightsThank you for purchasing a Panasonic Wi-Fi Phone for Skype Executive Travel Set.LWi-Fi handset with embedded Skype*1– Enjoy Free or Low-Cost calling– No Fixed Monthly Charges– Hands Free speaker phoneLPortable base unit with Wireless Router– For Use in 6 countries– Wireless LAN for IEEE 802.11b*1 Skype offers subscription-based services such as Skype Voicemail, SkypeIn and SkypeOut. For more information, visit the Skype homepage: http://www.skype.com/How does Skype work?The KX-WP1050 Wi-Fi Phone for Skype Executive Travel Set consists of KX-WPA102 base unit with a router/wireless access point functionality and KX-WPA100 wireless handset. It enables you to make and answer Skype-to-Skype calls with its handset anywhere an Internet connection is available. In order to make Skype-to-Skype calls, the handset needs to be wirelessly connected to the base unit which provides an access to the Internet. You also need to sign in to Skype with your Skype account to make Skype-to-InternetSkype-to-Skype callsSkypephone Headset+PC (Skype installed)Modem /Router KX-WPA102KX-WP1050ComputerLandline telephoneOptional Services -SkypeIn calls -SkypeOut calls -Skype VoicemailKX-WPA100Skype SystemTelephoneNetworkTemporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 5Skype calls. You can create your Skype account with the handset, or use your existing Skype account from the PC version of Skype.What is Skype?With Skype, you can make free calls over the Internet to any Skype users all over the world.The Skype program is already installed in the KX-WPA100 handset so that you can start using it easily.Skype also offers additional features, including:All of these features are available at http://www.skype.com/No emergency calls (No 911 service): Skype is not a replacement for your ordinary telephone and cannot be used for emergency calling.LFor information about Skype, please visit the Skype homepage:http://www.skype.com/LSpecifications are subject to change without notice.TrademarksLMicrosoft®, Windows® and Microsoft Internet Explorer® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.LUPnP™ is a trademark of the UPnP™ Implementers Corporation.LSkype, SkypeIn, SkypeOut and the S logo are trademarks of Skype Limited.LWi-Fi is a trademark of the Wi-Fi Alliance.LMozilla® and Firefox® are trademarks of the Mozila Foundation.LAll other trademarks identified herein are the property of their respective owners.SkypeOut SkypeOut allows you to place calls to traditional landline and mobile phones.SkypeIn SkypeIn is a subscription feature that provides you with a traditional phone number for receiving Skype calls on your handset from traditional landlines and mobile phones.Skype Voicemail Skype Voicemail allows you to send and receive Voicemail messages and record a greeting.Temporary Confidential
Introduction6For assistance, please visit http://www.panasonic.com/phonehelpImportant safety instructionsWhen using the product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.1. Read all instructions carefully.2. Follow all warnings and instructions marked on the product.3. Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a moist cloth for cleaning.4. Do not use the product near water, for example near a bathtub, wash bowl, kitchen sink, etc.5. Place the product securely on a stable surface. Serious damage and/or injury may result if the product falls.6. Do not cover slots and openings on the product. They are provided for ventilation and protection against overheating. Never place the product near radiators, or in a place where proper ventilation is not provided.7. Use only the power source marked on the product. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.8. Do not place objects on the power cord. Install the product where no one can step or trip on the cord.9. Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.10. Never push any objects through slots in the product. This may result in the risk of fire or electric shock. Never spill any liquid on the product.11. To reduce the risk of electric shock, do not disassemble the product. Take the product to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used.12. Unplug the product from power outlets and take to an authorized service center when the following conditions occur:A. When the power cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center.E. If the product has been dropped or physically damaged.F. If the product exhibits a distinct change in performance.13. Do not touch the units, the AC adaptor cord and AC cord, or CHARGE cable during lightning storms.14. Do not use the product to report a gas leak, when in the vicinity of the leak.Temporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 715. Do not use the units on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity.LAbide by instructions regarding use in airplanes and hospitals.SAVE THESE INSTRUCTIONSCAUTION:InstallationLDo not touch the plug with wet hands.LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.BatteryTo reduce the risk of fire or injury to persons, read and follow these instructions.LUse only the battery(ies) specified.LDo not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.LDo not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.LExercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.LCharge the battery(ies) provided, or identified for use with the product only, in accordance with the instructions and limitations specified in this manual.WARNING:LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262).Medical:LConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 2.412 GHz to 2.462 GHz, and the power output is 15 dBm (max.).) Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Temporary Confidential
Introduction8For assistance, please visit http://www.panasonic.com/phonehelpSecurity cautionWhen using this product, take appropriate measures to avoid the following security breaches.LLeaks of private information via this productLIllegal use of this product by a third partyLInterference or suspension of the use of this product by a third partyTake the following measures to avoid security breaches:LTo prevent illegal access, keep the update firmware (If you do not have the latest version of firmware, this can lead to blocked access or information leaks).LWhen downloading data from the Internet, ensure that viruses or illegal programs are not inadvertently downloaded.LYou are responsible for the security settings, such as user name and password, to access this product. This information should not be made available to any third parties outside the user group.LPlace this product where it is unlikely to be stolen.LYou are responsible for this product’s user information, such as Contacts list, Internet settings etc. This information should not be made available to any third parties outside the user group.LWhen sending this product to be repaired with a company not related to Panasonic, make a back-up file of the base unit settings, if necessary, and reset this product to factory default.LWhen transferring this product to another party, make a back-up file of the base unit settings, if necessary, and reset this product to factory default.LWhen disposing of this product, reset this product to factory default, or erase information by means of electrical deletion or physical dismantlement.User Name and Password ProtectionThe use of a unique User Name and secret Password is an important tool that will help limit unauthorized individuals from accessing the base unit. If you choose to disable this tool, and choose not to limit access by use of a User Name and Password, this may result in access to the base unit by unauthorized individuals. See “Password” in “Maintenance” section on page 131.Temporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 9Countries permitted to use this productIMPORTANT:Temporary Confidential
Introduction10 For assistance, please visit http://www.panasonic.com/phonehelpFor best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonic units use radio waves to communicate with each other.For maximum distance and noise-free operation, we recommend the following:LPlacing the product away from electrical appliances.LPlacing the base unit in a HIGH and CENTRAL location with no obstructions such as walls.LIf you use the handset or base unit near a microwave oven which is being used, noise may be heard. Move away from the microwave oven and bring the handset closer to the base unit.LIf you use the handset or base unit near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and bring the handset closer to your base unit.EnvironmentLKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.LThe product should be kept free from excessive smoke, dust, high temperature, and vibration.LThe product should not be exposed to direct sunlight.LDo not place heavy objects on top of the product.LWhen you leave the product unused for a long period of time, unplug the product from the power outlet.LThe product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided.LThe maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.LOperating the product near 2.4 GHz electrical appliances may cause interference. Move away from the electrical appliances.Routine careLWipe the outer surface of the product with a soft moist cloth. Do not use benzine, thinner, or any abrasive powder.Temporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 11Accessory informationIncluded accessories*1 You might need a separate AC cord when you use this product in other countries. See page 13 for details.The included AC cord is compatible with a power source up to 125 V AC.*2 The handset cover comes attached to the handset.*3 Operating Instructions are included.*4 The sticker lists the factory default wireless settings for the base unit. Please attach the sticker on the back cover of the Quick Start Guide, and store it in a safe place.No. Accessory item Order number Quantity1AC adaptor for base unit PQWEWP1050 12AC cord*1 PQJA10188Z 13Battery CGA-P001 14Handset cover*2 PQYNWPA100R 15Handset stand PQKE10465Z 16CHARGE cable PQJA10184Z 17Ethernet cable PQJA10185Z 18CD-ROM*3 PQQX15539Z 19Carrying case PQQD10002Z 1jWLAN sticker*4 PQQT23321Z 1123456789jTemporary Confidential
Introduction12 For assistance, please visit http://www.panasonic.com/phonehelpNote:LAll the accessory items except the CD-ROM are included in the carrying case.Packing the accessoriesNote:LWhen packing the accessories in the carrying case, do not put the CD-ROM in the case.Ethernet cableCHARGE cableAC adaptorBase unitBatteryHandsetCarrying caseQuick Start GuideHandset standAC cordTemporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 13Additional/replacement accessoriesChanging the AC cord while traveling:Carry the AC cord designed for use in your destination countries when you travel. See page 9 for information about countries permitted to use this accessory along with the main kit.Sales and support informationLTo order additional/replacement accessories, call 1-800-332-5368.LTTY users (hearing or speech impaired users) can call 1-866-605-1277.Accessory item Order numberAC cord PSJA1106Z (for UK)PFJA02A006Z (for EU)Rechargeable lithium-ion (Li-ion) battery CGA-P001Headset KX-TCA88HAKX-TCA86KX-TCA91KX-TCA92KX-TCA93KX-TCA94KX-TCA95(For UK) (For EU)Temporary Confidential
Introduction14 For assistance, please visit http://www.panasonic.com/phonehelpControlsBase unitFront viewRear viewALOCATOR indicatorBWIRELESS indicatorCLAN (Ethernet) indicatorDWAN (Internet) indicatorELOCATOR buttonFCHARGE portGPower portHWAN (Internet) portILAN (Ethernet) portJMode selector (page 144)KFACTORY DEFAULT RESET button (page 145)ACBDEFMode selectorKGHIJTemporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 15HandsetASpeakerBHeadset jackC{{} (SEND)D{s} (SP-PHONE)E{*}FCHARGE portGMicrophoneHCharge/Ringer indicatorIReceiverJDisplayKLeft soft keyLNavigator key ({^} {V} {<} {>})MMiddle soft key: Press the center of the navigator key.NRight soft keyO{}} (END)P{MUTE} / {CLEAR}Q{CONTACTS}R{#}Options Select BackAJKLMNOQCDFGHIPREBTemporary Confidential
Introduction16 For assistance, please visit http://www.panasonic.com/phonehelpShort cut keys:You can access the useful features by using the short cut keys.While in Idle mode, press the desired short cut key.LTo display Idle screen, see “Powering on the handset (Signing in to Skype)” on page 51.Keypad lock:While in Idle mode, press and hold {Menu} (middle soft key) to lock the keypad. To release the lock, press and hold Middle soft key again.LDuring the keypad lock, “ ” icon is displayed on the handset display.Key Displayed function name DescriptionRight soft key {Connect}/{Sign in}Connects to network or signs in to Skype.Left soft key {Options}Accesses Power screen menu (page 59).{{}– Accesses Outgoing calls list. {<} or {>} to switch to Incoming calls list or Missed calls list.{CONTACTS}– Accesses Contacts list.Temporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 17Symbols and screen shots used in these operating instructionsSymbols used for operationsHandset:Computer:Symbol Meaning{} The words in the brackets indicate unit button names/soft key names on the handset.Example:– Unit buttons: {{}, {CONTACTS}– Soft keys: {Options}, {Menu}“ ” The words in quotations indicate menus displayed on the handset screen.Example:“Add contact”iProceed to the next operation.<Example> <Meaning>1{Menu} (middle soft key)2“Settings” i {Select}3Select the desired setting.1While in Idle mode, press {Menu} (middle soft key).2Press {^} or {V} to select “Settings”, then press {Select} (middle soft key).3Press {^} or {V} to select the desired setting.Symbol Meaning[ ] The words in the brackets indicate button names and hyperlinks displayed on the computer screen.Example:[Next>], [OK]Temporary Confidential
Introduction18 For assistance, please visit http://www.panasonic.com/phonehelpScreen shots used for operationsLMicrosoft product screen shots reprinted with permission from Microsoft Corporation.LThe screen shots in these instructions are Microsoft Windows XP and are included for reference only.LThe screen shots in these instructions may differ slightly from the screen shown on your computer.Temporary Confidential
IntroductionFor assistance, please visit http://www.panasonic.com/phonehelp 19System requirementsYour computer and network must meet the following technical specifications for the unit to work properly.For your PC For Base unitFor HandsetItem DescriptionOperating system Microsoft Windows XPMicrosoft Windows 2000Interface Ethernet network device installed or IEEE 802.11 b/g wireless network device installed.Web browser Microsoft Internet Explorer 6.0 or higher for Windows Mozilla Firefox 1.5 or higher for WindowsItem DescriptionInternet connection 10/100 Mbps Ethernet connection port device which provides access to Internet, such as Cable or DSL modem (USB-only modems are not supported.)Item DescriptionInternet connection Base unit or IEEE 802.11b wireless access point which provides access to Internet.Temporary Confidential
Getting Started20 For assistance, please visit http://www.panasonic.com/phonehelpSetup flowFollow the procedures below to start using the unit.1Installing the base unitSelect the appropriate setup procedure according to where and how you use the unit.LWhile you are at a hotel room page 22LWhile you are at home– AP (Bridge) mode– Router mode page 24page 252Setting up the base unit for the first time (Initialization Wizard)page 273Setting up the handset page 444Powering on the handset (Signing in to Skype) page 51Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 21Installing the base unitYou need to install the base unit before using this product. The installation methods differ depending on whether you are at a hotel room or at home.LHotel: See the instructions “While you are at a hotel room” on page 22.LHome: See the instructions “While you are at home” on page 23.Note:LThe AC adaptor and base unit may become warm during use; however this is not a sign of malfunction.LYou can also connect your computer to the base unit wirelessly instead of using the Ethernet cable. To establish a wireless connection between your computer and the base unit, you need to enter the same SSID into the computer as that of KX-WPA102 (The SSID is displayed on the included WLAN sticker). See “Using your computer on a wireless LAN” on page 153 for details.LYou need to use only the included Panasonic AC adaptor PQWEWP1050 and AC cord PQJA10188Z.LLeave the AC adaptor cord plugged in to the AC outlet the whole time. LThe unit will not work during a power failure.Temporary Confidential
Getting Started22 For assistance, please visit http://www.panasonic.com/phonehelpWhile you are at a hotel roomYou can use the handset while you are away by accessing the Internet at a hotel room.The hotel you are staying in may give you specific instructions as to what Internet connection type you should select. In that case, follow their instructions. Otherwise, you are suggested to select [DHCP] mode when you set Internet Connection Type in Initialization Wizard (page 27).1Switch the Mode selector to “HOTEL”.2Make sure the base unit is left unplugged. Connect the included Ethernet cable to the “WAN” port on the base unit and the Ethernet port (RJ45 jack) in the hotel room.3Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet (LAN) port on your computer.1WAN indicatorBase unitAC adaptorTo AC outlet(120 V AC, 60 Hz)To LAN portTo WAN portEthernet cable (not included)Ethernet cable (included)ComputerInternetTo Ethernet port(RJ45 jack)AC cordMode selector423Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 234Connect the included AC adaptor cord to the power port on the base unit and an AC outlet.LWhen the base unit turns on (The WAN indicator lights in green or amber), the installation is complete.Note:LIn step 2, you can connect the base unit to a wireless bridge device in a hotel room if available. Ask the hotel front desk for details.While you are at homeThe base unit has 2 modes of operation while used at home: AP (Bridge) mode and Router mode.AP (Bridge) mode:Designed for the case when you have a router or modem (DSL or cable) with a built-in router.LRefer to the instructions on page 24.Router mode:Designed for the case when you have a standard DSL or cable modem only.LRefer to the instructions on page 25.Note:LIf your modem has more than one port, then you have a modem with a built-in router.LIf you have more than one computer connected to the Internet, then you have a router.LIf you do not know which type your modem is, ask your Internet service provider.Temporary Confidential
Getting Started24 For assistance, please visit http://www.panasonic.com/phonehelpAP (Bridge) mode - With an EXISTING ROUTER or MODEM with a built-in ROUTERIf you install the base unit with your existing router or modem with a built-in router, the base unit operates in AP (Bridge) mode. Select [AP (Bridge)] mode for your Internet connection type in Initialization Wizard (page 27). In AP (Bridge) mode, the base unit connects wireless devices to one another and to the LAN, and allows wireless devices to use DHCP server on the LAN.1Switch the Mode selector to “HOME”.2Turn off your computer properly. Unplug any cable connecting your existing router (or modem with a built-in router) to your computer. However, your existing router (or modem with a built-in router) needs to remain connected to your cable or DSL modem.3Make sure the base unit is left unplugged. Connect the included Ethernet cable to the “WAN” port on the base unit and an unused Ethernet (LAN) port on your existing router or modem with a built-in router.1WAN indicatorBase unitMode selector352AC adaptorTo AC outlet(120 V AC, 60 Hz)To LAN portTo WAN portEthernet cable (not included)Existing router Cable or DSL modemEthernet cable (included)ComputerInternetAC cord4Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 254Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet (LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged the router from in step 2).5Connect the included AC adaptor cord to the power port on the base unit and an AC outlet.LWhen the base unit turns on (The WAN indicator lights in green or amber), the installation is complete.Router mode - With a MODEM onlyIf you install the base unit with a modem only, the base unit operates in Router mode. In Router mode, the base unit assigns IP addresses to wireless devices as a DHCP server. It also protects the wireless devices from directly exposing to the LAN. For your Internet connection type, select [DHCP], [Static] or [PPPoE] in Initialization Wizard (page 27).1Switch the Mode selector to “HOME”.2Turn off your computer properly. Unplug your cable or DSL modem’s power cord and leave the modem turned off for at least 10 minutes to clear its memory. Unplug any AC adaptorTo AC outlet(120 V AC, 60 Hz)To WAN portEthernet cable (included) Cable or DSL modemInternetAC cord1WAN indicatorBase unitMode selectorTo LAN portEthernet cable (not included)Computer43622, 5Temporary Confidential
Getting Started26 For assistance, please visit http://www.panasonic.com/phonehelpcable connecting the modem to your computer. However, the modem needs to remain connected to the Internet.3Connect the included Ethernet cable to the “WAN” port on the base unit and an Ethernet (LAN) port on the modem.4Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet (LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged your modem from in step 2).5Plug your modem’s power adaptor into an AC outlet.LWait for your modem’s power light to stop flashing before you go to the next step. (It may take a few minutes.)6Connect the included AC adaptor cord to the power port on the base unit and an AC outlet.LWhen the base unit turns on (The WAN indicator lights in green or amber), the installation is complete.Checking for Internet access:Turn on your computer and open the Web browser to check for Internet access. If you cannot access the Internet, go through the following.LFor Cable modem users: Turn off the modem for 10 minutes to erase the old information in the modem. If this still does not work, you may need to register the base unit with your Internet service provider. Provide them with the WAN MAC registration number found on the bottom of the base unit.LFor DSL modem users: You may need to set the PPPoE configuration for your Internet connection type in Initialization Wizard (page 27). Do not unplug the power of the base unit during the setting. If unplugged, it may take a few minutes or more to reset the PPPoE connection.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 27Setting the base unit for the first time (Initialization Wizard)You can log in the base unit and configure the unit’s settings using a Web browser on your computer connected to the “LAN” port on the base unit.Important:LRecommended Web browser:Microsoft Internet Explorer 6.0 or higher for WindowsMozilla Firefox 1.5 or higher for WindowsLMake sure the base unit and handset are not being used.LChange the appropriate setting for your network configuration.If you access the base unit for the first time or after resetting the network settings (page 134, 145), you must set the user name and password first in Initialization Wizard so that you can access the base unit using them. After that, you need to configure the network settings you use for HOME and HOTEL modes.For example, if you register AP (Bridge) setting for HOME mode and DHCP setting for HOTEL mode, you can connect to the Internet in AP (Bridge) or DHCP mode just by switching the Mode selector (page 144) to HOME or HOTEL from the next time.Temporary Confidential
Getting Started28 For assistance, please visit http://www.panasonic.com/phonehelpInitialization Wizard flowFollow the procedures below to set the base unit for Internet connection.If you check [Skip by setting] in stage 2, you can skip to stage 5 without configuring the Internet connection settings for the HOME mode profile. If you check [Skip by setting] in stage 5, you can skip to stage 8 without configuring the Internet connection settings for the HOTEL mode profile.1Login User Name and Password (Step 1)Set your user name and password to log in the base unit.page 292Internet Connection Setting for Home Mode (Step 2)Name the profile of the Internet connection setting for HOME mode.page 303Internet Connection TypeSelect the Internet connection type used for the HOME mode profile.(Types available: PPPoE/DHCP/Static/AP (Bridge))page 314(Internet Connection Type) ConfigurationConfigure the Internet connection type selected for the HOME mode profile. page 365Internet Connection Setting for Hotel Mode (Step 3)Name the profile of the Internet connection setting for HOTEL mode.page 336Internet Connection TypeSelect the Internet connection type used for the HOTEL mode profile. (Types available: PPPoE/DHCP/Static) page 347(Internet Connection Type) ConfigurationConfigure the Internet connection type selected for the HOTEL mode profile. page 368Save SettingsConfirm the settings you have configured in Initialization Wizard, and save.page 35Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 29Initialization Wizard1Open your Web browser on your computer connected to the “LAN” port on the base unit.2Enter http://192.168.0.242/ (the KX-WPA102’s default IP address) or http://kx-wpa.webpage in the address field of your browser and press ENTER key. You can also double click the KX-WPA102 icon in My Network Places in Start menu when using Windows XP and UPnP is enabled. See “Setting UPnP to display the shortcut” on page 153 for details.LInitialization Wizard starts. A screen with fields for your user name and password (Login User Name and Password page) is displayed.If “Initialization Wizard” window is not displayed:LCheck the setting of Local Area Connection of your computer. It is necessary to obtain an IP address of your computer automatically from a DHCP server (page 147).LSometimes it is necessary to set up your Web browser’s proxy server to access the KX-WPA102 base unit (page 151).Temporary Confidential
Getting Started30 For assistance, please visit http://www.panasonic.com/phonehelp3Enter the desired user name and password, then click [Next>].Important:LPlease keep your user name and password securely.LThe Internet Connection Setting for Home Mode page is displayed.Setting Description[User Name] LThe user name and password can contain 6 to 15 characters (including numbers).LThe following cannot be used: [ “ ], [ ‘ ], [&], [<], [>], [(space)]LUser name and password must be different from each other.LUser name and password are case-sensitive.[Password][Retype Password]LEnter the password again.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 314Enter the desired profile name for the profile No. you select, then click [Next>].LIf you wish to use the default Internet connection setting (DHCP), check [Skip by setting].LThe Internet Connection Type page is displayed.Note:LIf you check [Skip by setting], the page will not be displayed.Setting Description[Profile Name] LThe profile name can contain 1 to 20 characters (including numbers). When different network connection settings are created for different network environments, a profile name should be given to each setting to distinguish one from another. Name the setting, for example, “Hotel”, “Home” or “Office”. [Profile No.] LSelect the number for the profile name.Temporary Confidential
Getting Started32 For assistance, please visit http://www.panasonic.com/phonehelp5Select the desired connection type used in HOME mode, then click [Next>].LInternet connection modes vary according to the Internet service provider. Select a connection mode referring to the Internet service provider’s setup information.LSelect [PPPoE], [DHCP] or [Static] if the base unit is installed in Router mode. Select [AP (Bridge)] if the base unit is installed in AP (Bridge) mode.LA screen with fields for configuring the connection type you select in this step is displayed. See “Configuring the Internet connection settings” on page 36.Setting Description[PPPoE] LThis connection mode is usually required for use with DSL modems.[DHCP] LAllows the base unit to receive an IP address automatically from a DHCP server. This connection mode is usually required for use with cable modems.[Static] LAllows the base unit to assign a specific IP address.[AP (Bridge)] LAllows the base unit to work as an access point when you have a router at home. ([AP (Bridge)] is not available in HOTEL mode.)Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 336Configure the settings, then click [Next>].LThe Internet Connection Setting for Hotel Mode page is displayed.Temporary Confidential
Getting Started34 For assistance, please visit http://www.panasonic.com/phonehelp7Enter the desired profile name for the profile No. you select, then click [Next>].LIf you wish to use the default Internet connection setting (DHCP), check [Skip by setting].LSee step 4 on page 31 for details.LThe Internet Connection Type page is displayed.Note:LIf you check [Skip by setting], the Internet Connection Type page will not be displayed.8Select the desired connection type used in HOTEL mode, then click [Next>].L[DHCP] mode (default setting for hotel Internet connection type) is often used in hotel rooms.Setting Description[PPPoE] LThis connection mode is usually required for use with DSL modems.[DHCP] LAllows the base unit to receive an IP address automatically from a DHCP server. This connection mode is usually required for use with cable modems.[Static] LAllows the base unit to assign a specific IP address.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 35LA screen with fields for configuring the connection type you select in this step is displayed. See “Configuring the Internet connection settings” on page 36.9Configure the settings, then click [Next>].LThe Save Settings page is displayed.10 Confirm the settings you are about to save, then click [Save].LThe base unit begins restarting.Note:LYou can change the user name and password after logging in to the base unit (page 131).LOnce you have configured the settings in Initialization Wizard, you can connect to the Internet in the connection mode that is registered as HOME or HOTEL mode just by switching the Mode selector (page 144) to HOME or HOTEL from the next time.Temporary Confidential
Getting Started36 For assistance, please visit http://www.panasonic.com/phonehelpConfiguring the Internet connection settingsConfigure the Internet connection mode you select in the Internet Connection Type page of Initialization Wizard (in step 6 of page 33 for HOME mode; step 9 of page 35 for HOTEL mode).LIf your Internet service provider or network administrator does not specify any of the settings, leave the data fields blank.PPPoE Configuration: (Point to Point Protocol over Ethernet) This connection mode is usually required for use with DSL modems.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 37Setting Description[User Name] LEnter your User Name (1 – 63 characters) provided by your Internet service provider in this data field.[Password] LEnter your Password (1 – 63 characters) provided by your Internet service provider in this data field.[Service Name] LEnter your Service Name (1 – 63 alphanumeric characters) provided by your Internet service provider in this data field if required.[DNS Server 1] LIf you have the DNS (Domain Name System) server addresses assigned by your Internet service provider or network administrator, enter them in this data field. They usually have two addresses.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[DNS Server 2][Domain Name] LEnter your Domain Name provided by your Internet service provider in this data field if required.[MTU] LEnter the maximum size of packet that can be sent.Temporary Confidential
Getting Started38 For assistance, please visit http://www.panasonic.com/phonehelpDHCP Configuration: Allows the base unit to receive an IP address automatically from a DHCP server. This connection mode is usually required for use with cable modems. DHCP configuration is often used in hotel rooms. Ask the hotel front desk for details.Setting Description[DNS Server 1] LIf you have the DNS (Domain Name System) server addresses assigned by your Internet service provider or network administrator, enter them in this data field. They usually have two addresses.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[DNS Server 2][Host Name] LEnter your Host Name (1 – 31 characters) provided by your Internet service provider in this data field if required.[Domain Name] LEnter your Domain Name provided by your Internet service provider in this data field if required.[MTU] LEnter the maximum size of packet that can be sent.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 39Static Configuration: Allows the base unit to assign a specific IP address.Setting Description[IP Address] LIf your Internet service provider specifies the IP address and subnet mask, enter them in each data field.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[Subnet Mask][Default Gateway] LIf you have the Default Gateway address assigned by your Internet service provider or network administrator, enter it in this data field.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.Temporary Confidential
Getting Started40 For assistance, please visit http://www.panasonic.com/phonehelp[DNS Server 1] LIf you have the DNS (Domain Name System) server addresses assigned by your Internet service provider or network administrator, enter them in this data field. They usually have two addresses.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[DNS Server 2][Domain Name] LEnter your Domain Name provided by your Internet service provider in this data field if required.[MTU] LEnter the maximum size of packet that can be sent.Setting DescriptionTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 41AP Configuration: This configuration needs to be made if you have a router at home and use the base unit as an access point. (AP Configuration is not available in the HOTEL mode.)Setting Description[Connection Mode] LSelect AP-DHCP for Connection Mode if the DHCP server is operating in the router or modem with a built-in router you are using. Select AP-Static if you want to assign Static IP address.[IP Address] LSet the IP address and subnet mask corresponding to your local network.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[Subnet Mask][Default Gateway] LSet the default gateway address corresponding to your local network by entering the IP address of your existing router or modem with a built-in router, for example.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.Temporary Confidential
Getting Started42 For assistance, please visit http://www.panasonic.com/phonehelpTroubleshooting for installationIf problems occur while installing the base unit, you can refer to the check list below.Up-to-date support information can be found on the xxxxx site (http://XXXXXXXXXXXXXXXXX). Please refer to it, along with this guide, when troubleshooting.Connection:Internet access:Problem SolutionThe modem is connected but the WAN indicator is off.LCheck that the modem and this product are connected.LCheck that the power of the modem and this product are turned on.The Ethernet is connected but the LAN indicator is off.LCheck the connection of the computer.LCheck that the power of the computer is turned on.LCheck that the LAN card and driver are installed on the computer.Problem SolutionCannot connect to the Internet.LCheck the connection of the modem. Also check the connection between this product and the LAN.LCheck the information received from the Internet service provider regarding Internet connection.LWhen instructed to do so by the Internet service provider, set the web browser proxy server (page 151).LIf the power is cut when connected to the Internet using PPPoE, it may take a few minutes or more to reconnect to the Internet.LCheck that the power supply was turned on in the following order: modem, router, base unit, computer. When turning off the power supply, do so in the following order: modem, base unit, router (if you have one), computer.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 43Initialization Wizard:Problem SolutionInitialization Wizard is not displayed.LDialog boxes may not be displayed immediately due to the state of the LAN.LCheck that LAN or WIRELESS indicator lights in green. Also, check if the LAN card or wireless LAN card is on. If not, check that the LAN is connected.LCheck that the power supply was turned on in the following order: modem, router, base unit, computer. When turning off the power supply, do so in the following order: modem, base unit, router (if you have one), computer.Temporary Confidential
Getting Started44 For assistance, please visit http://www.panasonic.com/phonehelpSetting up the handsetBattery installation/replacement1Press the notch of the handset cover firmly, and slide it in the direction of the arrow.LFor replacement, remove the old battery.2Insert the battery (A), and press it down until it snaps into position (B). Then close the handset cover (C, D).Important:LUse only the rechargeable Panasonic battery noted on page 13.Attention:A lithium-ion battery that is recyclable powers the product you have purchased.Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.ADBCLi-ionTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 45Battery chargeConnect the included CHARGE cable to the CHARGE port of the handset. Connect the other end to the CHARGE port of the base unit that is connected to the power supply.Charge the battery for 6 hours before initial use.LWhile charging, the charge indicator on the handset lights in red. When the battery is fully charged, the indicator goes out.LYou can use the included handset stand while charging the battery. To use the stand, align the grooves of the handset with the tabs of the stand and insert.Note:LIf you want to use the handset immediately, charge the battery for at least 15 minutes.To AC outlet CHARGE portsCHARGE cableCharge indicator(120 V AC, 60 Hz)Handset standTemporary Confidential
Getting Started46 For assistance, please visit http://www.panasonic.com/phonehelpBattery levelNote:LWhen the battery needs to be charged, the handset beeps intermittently during use.Panasonic battery performanceNote:LBattery operating time may be shortened over time depending on usage conditions and surrounding temperature.LBattery operating time may be shortened when you connect to a different access point, or after you change some settings in the handset.LThe battery level may not be displayed correctly after you replace the battery. In this case, let the battery charge for 6 hours.Battery icon Battery levelFully chargedMediumLowFlashing: needs to be recharged.ChargingOperation Operating timeWhile in use (talking) Up to 3 hoursWhile not in use (idle) Up to 72 hoursTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 47Base unit status indicatorsOn different occasions you may notice that the status indicators on the base unit are flashing. You may find the following flash patterns helpful to you:Indicator type Indicator color Indicator pattern StatusLOCATOR Green On The base unit is locating the handset.Flashing The base unit is registering the handset.WIRELESS Green On The base unit is connected to the wireless LAN.Flashing A wireless data transfer is in progress.LAN Green On A connection to LAN has been established.Flashing A data transfer is in progress on the LAN side.Status indicatorsTemporary Confidential
Getting Started48 For assistance, please visit http://www.panasonic.com/phonehelpWAN Green On An Internet connection has been established (IP address obtained).Flashing A data transfer is in progress on the WAN side.Red Flashing The base unit hardware may be defective.LVisit http://www.panasonic.com/phonehelpAmber On An Internet connection has yet to be established (No IP address obtained).Flashing The base unit firmware may be defective and requires a firmware update.LSee “Setting the static IP address on your computer” on page 148 for details.Green/Amber Alternately flashing The IP addresses on the LAN and WAN sides overlap.LThe network configuration of the LAN side will be temporarily changed to avoid the overlap of the LAN and WAN networks. During this time, Port Forwarding, DMZ, Packet Filtering and Static Routing functions are disabled. To activate those functions, change the LAN network configuration.Off – The Ethernet cable is not connected to the Internet (WAN) port on the rear of the base unit. Connect it.Indicator type Indicator color Indicator pattern StatusTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 49Text entryWhen you enter characters or numbers, use the character and symbol tables for reference.Character tablePress {0} – {9}, {*} or {#}. i {OK}Note:LTo enter another character that is located on the same dial key, first press {>} to move the cursor to the next space.LTo change the input mode, press {*} to shift through Lower case (abc), Upper case (ABC), Numeric (123) and Hexadecimal (HEX) modes (Pressing {*} to change the input mode is invalid when you enter telephone numbers.).LThe characters assigned to each key differ depending on the data entry mode.Key Character{1}1{2}abcABC2{3}def DEF3{4}ghi GHI 4{5}jklJKL5{6}mn o MNO6{7}pqr sPQRS7{8}tuvTUV8{9}wxyzWXYZ9{0}Space 0 + (press and hold){*} Input mode change *{#} Linefeed #Temporary Confidential
Getting Started50 For assistance, please visit http://www.panasonic.com/phonehelpSymbol table1Press {Symbol} while in the data entry screen.2Press {^}, {V}, {<} or {>} to select the desired symbol. i {Insert}Note:LThe available symbols differ depending on the data entry mode.Editing/correcting a mistakePress {<} or {>} to move the cursor to the character or number you want to erase, then press {CLEAR}. Enter the appropriate character or number.Note:LPress and hold {CLEAR} to erase all characters or numbers when the cursor is positioned after the last character or number.LPress and hold {CLEAR} to erase all characters or numbers after the cursor if the cursor is in the middle of the text.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 51Powering on the handset (Signing in to Skype)To use the handset, you need to connect to a network and sign in to Skype.Starting up for the first time1Press and hold {}} for 2 seconds to power on the handset.2Read and accept the Skype’s agreement. i {Yes}LThe handset starts searching for available networks within the area.3Select the desired network if the network list is displayed. i {Connect}4After a network connection is complete, select “Sign in to Skype” if you already have a Skype account. i {Select}LTo create a new account, see “Creating a new account” on page 53.5Enter your Skype name. i {OK}6Enter your password. i {OK}7Press {Yes} or {No} to decide whether to sign in automatically from the next time on.LIdle screen appears (page 54).Note: LYou can also follow these instructions when you start up the handset after you reset the handset.LIn step 3, you can connect to specific networks that require you to select security type and enter the network key.LIn step 3, you can also connect to open networks. When connecting to open networks, the display appears to confirm whether you want to connect or not.LFor text entry, see page 49 for details.Temporary Confidential
Getting Started52 For assistance, please visit http://www.panasonic.com/phonehelpStarting up from the second time1Press and hold {}} for 2 seconds to power on the handset.2Enter your PIN code if prompted.LThe handset starts searching for available networks. If any networks you normally use are already in your Preferred networks list (page 84), the handset automatically connects to one of the networks in the list.3After a network connection is complete, select “Sign in to Skype”. i {Select}LTo create a new account, see “Creating a new account” on page 53.LIf the handset is set to “Auto sign in” (page 85), Idle screen appears instead of the “Sign in” screen, and steps 4-6 are skipped.4Enter your Skype name. i {OK}5Enter your password. i {OK}6Press {Yes} or {No} to decide whether to sign in automatically from the next time on.LIdle screen appears (page 54).Note:LFor text entry, see page 49 for details.To power off the handsetPress and hold {}} for 2 seconds.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 53Creating a new accountIf you do not have your Skype account, or want to create another account, select “New account” in step 4 in “Starting up for the first time” (page 51) or step 3 in “Starting up from the second time” (page 52) to create a new account.1“New account” i {Select}2Enter a Skype name. i {OK}3Enter a password. i {OK}4Repeat the password. i {OK}5Read and accept the Skype’s agreement. i {Yes}LIdle screen appears.Note:LFor text entry, see page 49 for details.Temporary Confidential
Getting Started54 For assistance, please visit http://www.panasonic.com/phonehelpHandset displaysIdle screenHandset status iconsIcon MeaningWithin range of the wireless LANHandset has no link to the wireless LAN.Battery levelBattery is charging.Speakerphone is on.*1 A newly missed call has been listed in History.*1 A newly received Voicemail has not yet been heard.*1 A newly received Authorization request is on the pending authorization request list in History.*1 Skype credit is low, or any Skype service is close to expiry.*1 Silent modeSoft key functionsHandset status iconsCurrent timeSkype credit balanceSkype statusTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 55*1 These icons align to the left in the order of priority.Skype status iconsWhile in Idle mode:Skype status icons represent your current Skype status.*1 Handset ringer is off.*1 Keypad locked*1 PIN lockedIcon StatusOnline: Indicates that you are signed in to Skype and online. You can make calls and accept calls that are allowed by your Privacy settings (page 82).Offline: Indicates that you are not connected to Skype, but you have still been authenticated as a Skype user.Skype Me: Indicates that you are available for anyone to call. This mode temporarily disables your Privacy settings (page 82).Away: Indicates that you are currently away from phone, but you are still signed in to Skype and can make calls.Do Not Disturb: Indicates that you are signed in to Skype, but do not want to receive calls. In this mode, the ringer tone is set to be silent.Invisible: Indicates that you are offline, but you are still signed in to Skype and can make calls.Not Available: Indicates that you are currently not available, but you are still signed in to Skype and can make calls.Connecting: Indicates that you are connecting to Skype.Icon MeaningTemporary Confidential
Getting Started56 For assistance, please visit http://www.panasonic.com/phonehelpWhile in Contacts list:Skype status icons represent the current Skype status of the contacts in Contacts list.Display back lightAfter 10 seconds of inactivity, the display back light is turned off in order to preserve the life of the battery.To turn on the display back lightTo use the handset when the display back light is turned off, press any key to turn the display back light on again.Icon StatusOnline: Indicates that the contact is signed in to Skype and online.Offline: Indicates that the contact is not signed in to Skype.Skype Me: Indicates the contact is available for calls from anyone.Away: Indicates that the contact is signed in to Skype but currently away.Do Not Disturb: Indicates that the contact is signed in to Skype but does not want to receive calls.Not Available: Indicates that the contact is signed in to Skype but is currently not available.Blocked: The contact is blocked and cannot contact you.Pending: Indicates that the contact is pending your authorization.Offline Voicemail: Indicates that the contact is not signed in to Skype but can receive Voicemails.Calls Forwarded: Indicates that the calls are forwarded to a specified number.SkypeOut: Indicates the contact is a SkypeOut contact.SkypeOut Blocked: Indicates the SkypeOut contact is blocked and cannot contact you.Temporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 57Main menuSkype’s Main menu provides 7 menus as shown below.1While in Idle mode, press {Menu} (middle soft key).2Select the desired menu. i {Select}Menu Description PageContacts Lists Skype and SkypeOut contacts, and shows their current Skype status. 61History Lists missed calls, incoming calls, outgoing calls, Voicemails and Authorization requests. 77Status Defines your personal Skype settings.Change status: Changes your Skype online status. 79My profile: Changes your Skype profile details. 79Sign out: Signs you out of Skype. 80Add contact Adds Skype and SkypeOut contacts to your Contacts list. 62Search Searches for Skype contacts over the Internet. 64Services Shows Skype credit, SkypeIn and Voicemail information. 92Temporary Confidential
Getting Started58 For assistance, please visit http://www.panasonic.com/phonehelpThe following sub menus in “Settings” menu are available even when you are not signed in to Skype.LNetworkLSoftware updates (in “General”)LReset (in “General”)LKeypad tone (in “Tones”)LTime and DateLPhone settingsLInformationLAdvancedSettings Configures handset settings. 81Network: Searches for networks, manages preferred networks, and sets auto-connection to open networks. 83General: Changes your password, sets auto sign-in, updates software, and resets handset settings. 85Call divert: Sets call forwarding, Voicemail and welcome messages. 71Privacy: Restricts incoming calls to those you specify. 82Tones: Sets the ringer type, tones and volume. 88Time and Date: Sets the time and date. 60Blocked users: Shows blocked users list and unblocks users you desire. 67Phone settings: Locks the handset, changes the handset PIN code, registers the handset to the base unit, adjusts the brightness of the handset display, and allows you to decide whether to save the battery.89Information: Shows the handset information such as product ID, software/firmware versions and MAC address.90Advanced: Sets the notification for a software update, and sets network proxy. 91Menu Description PageTemporary Confidential
Getting StartedFor assistance, please visit http://www.panasonic.com/phonehelp 59Power screenPower screen is another main menu that provides different functions such as turning the silent mode on or off, viewing the list of networks, changing your profile details and Skype status, etc. Functions available in the menu depend on whether you are signed in to Skype.1While in Idle mode, press {Options}.2Select the desired menu. i {Select}*1 Available only when you are signed in to Skype.Menu DescriptionSilent Sets the silent mode to on.Sounds on Sets the silent mode to off.Change status*1 Changes your Skype online status.My profile*1 Changes your Skype profile details. See page 79 for details.Sign out*1 Signs you out of Skype.View networks Shows a list of networks found in the area.Network details Shows network connection information.Temporary Confidential
Getting Started60 For assistance, please visit http://www.panasonic.com/phonehelpSetting the time and dateSet the correct date and time before you start using the handset.1{Menu} (middle soft key)2“Settings” i {Select}3“Time and Date” i {Select}4Select the desired setting.Note:LIf you make a mistake when entering the date and time, press {<} or {>} to move the cursor, then make the correction.LChanging “Time zone” and “Daylight saving” sets the displayed time forward or backward. When you set the time and date for the first time, set the time after all the other Time and Date settings.Time Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Press {*} to select “AM” or “PM”. i {OK}Time zone Select the desired item. i {Select}Daylight saving Select “Standard” or “Daylight saving”. i {Select}Date Enter the current month, day and year by selecting 2 digits for month and day, and 4 digits for year. i {Select}Date format Select the desired format. i {Select}Temporary Confidential
Managing ContactsFor assistance, please visit http://www.panasonic.com/phonehelp 61Contacts listYour Contacts list displays all of the names you can make calls to. If you have an existing Skype account, your Contacts list is automatically downloaded when you sign in. If you are new to Skype and have just created an account, your Contacts list will be empty. You will need to add contacts to your list (page 62).Skype protects the privacy of users by requiring authorization on names that you wish to add to your Contacts list. When you add a name to your list, an authorization request is sent to the user. The user can accept or deny the request. When a request is accepted, you can see when the contact is online and make calls to them. You can also view their personal profile details.1While in Idle mode, press {CONTACTS}.2Select the desired contact.LTo view the contact’s profile, press {Select}.LTo call the contact, press {{} or {s}.LTo access options, press {Options} and select the desired option. i {Select}Note:LIn step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}Temporary Confidential
Managing Contacts62 For assistance, please visit http://www.panasonic.com/phonehelpAdding contactsYou can add up to 500 contacts to your Skype Contacts list and search for contacts by name.Important:LYou can not add any more than 500 contacts; otherwise the Contacts list in your handset cannot be synchronized with the PC version of Skype Contacts list. If you happen to add more than 500 contacts to the PC version of Skype Contacts list, you need to delete the unwanted contacts only from the PC version of Skype Contacts list.LYour Contacts list also includes the blocked user contacts. If your Contacts list exceeds the limit, you may want to delete the blocked user contacts before deleting other contacts. To delete the unwanted contacts, see “Contacts list options” on page 65.Adding Skype contacts1{Menu} (middle soft key)2“Add contact” i {Select}3“Skype” i {OK}4Enter the Skype name (max. 32 characters). i {OK}5Press {Yes} to add the contact to your list and to authorize the contact to see when you are online.LPress {No} to add the contact without the authorization.6Press {OK} to send an Authorization request to the added contact.7Enter text to send with the request (max. 200 characters). i {OK}8{OK}Note:LYou can also search and add Skype contacts from “Search” menu (page 64). LIn step 6, the Authorization request is sent to the newly added contact so that the person will allow you to see when the person is online.LFor text entry, see page 49 for details.Temporary Confidential
Managing ContactsFor assistance, please visit http://www.panasonic.com/phonehelp 63Adding SkypeOut numbersYou can add non-Skype (SkypeOut) numbers to your Contacts list. SkypeOut numbers are listed with “ ” icon in your Contacts list.1{Menu} (middle soft key)2“Add contact” i {Select}3“SkypeOut number” i {OK}4“Contact’s name” i {Select}5Enter the name (max. 50 characters). i {OK}6“Phone number” i {Select}7Enter the phone number (max. 20 digits). i {OK}LThe phone number should start with the country code.8{Save}9{OK}Note:LFor text entry, see page 49 for details.LIn step 7, enter the phone number in the following way (even for local calls):“country code” + “area code” + “local phone number”Example (using the country code “1” for calling USA):+ 1 555 321 5555– “+” (international prefix) is automatically added.– In case of some countries, delete “0” at the first digit of the area code.– To correct a digit, press {CLEAR}.Temporary Confidential
Managing Contacts64 For assistance, please visit http://www.panasonic.com/phonehelpSearching for Skype contactsYou can search the Skype directory for your desired Skype contacts over the Internet so that you can call, add to your Contacts list, or view the profiles of the contacts.1{Menu} (middle soft key)2“Search” i {Select}3Enter the name or email address to search for. i {OK}4Select the desired Skype contact.LTo view the contact’s profile, press {Select}.LTo call the contact, press {{} or {s}.LTo access options, press {Options} and select the desired option. i {Select}Note:LFor text entry, see page 49 for details.More results Shows the next 20 results.Previous results Shows the previous 20 results.Search again Searches again with another keyword.Add to contacts Adds the contact to your Contacts list.View profile Shows the profile of the contact.Temporary Confidential
Managing ContactsFor assistance, please visit http://www.panasonic.com/phonehelp 65Contacts list optionsYou can access the option menu while viewing the Contacts list.1While in Idle mode, press {CONTACTS}.2Select the desired contact. i {Options}3Select the desired option. i {Select}*1 Available only for Skype contacts.*2 Available only for SkypeOut contacts.Note:LIn step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}LYou can also access the Contacts list options when viewing a contact profile.In step 2, press {Select} after finding the desired contact to view the contact profile. Then, press {Options} to access the options.LContacts are listed alphabetically in the following order:– Online Skype contacts– Offline Skype contacts with call forwarding number and SkypeOut contacts– Offline and unauthorized Skype contactsLIn step 2, you can also search for a contact by initial. Press the dial key ({0} – {9}) that corresponds to the first letter(s) of the contact you are searching for. When the list of contacts is displayed, select the desired contact.Call*1 Calls the contact. Select the desired phone number to call. i {Select}/{{}/{s}Send Voicemail*1 Sends Voicemail to the contact.Rename*1 Renames the display name of the contact.Remove Removes the contact from your Contacts list. Select “Remove and block” or “Remove only”.Block user Blocks or unblocks the contact (Skype status icon changes after setting).Unblock userRequest auth.*1 Sends an Authorization request to the contact (page 62).Options are not available if a request is already sent.Add SkypeOut*1 Adds a SkypeOut contact to your Contacts list.Edit*2 Edits the SkypeOut contact’s name and phone number.Temporary Confidential
Managing Contacts66 For assistance, please visit http://www.panasonic.com/phonehelpViewing a contact profileYou can view the profile of the contact you select.1While in Idle mode, press {CONTACTS}.2Select the desired contact. i {Select}Note:LIn step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}LThe display name of the contact may not be properly displayed due to the fact that the name is entered in the type of writing other than the Roman alphabet. In this case, press {Options}, and select “Rename” to change the name.LYou can also view the profile by pressing {CONTACTS}. i Select the desired contact. i {Options} i “View profile”Temporary Confidential
Managing ContactsFor assistance, please visit http://www.panasonic.com/phonehelp 67Blocking contactsBlocking contactsYou can block contacts that you do not wish to receive calls from in your Contacts list.1While in Idle mode, press {CONTACTS}.2Select the desired contact. i {Options}3“Block user” i {Select}Unblocking contactsYou can unblock contacts that are blocked in your Contacts list.1While in Idle mode, press {CONTACTS}.2Select the desired contact. i {Options}3“Unblock user” i {Select}To unblock contacts that are removed and blocked:Contacts that are removed and blocked from Contacts list go to the blocked users list.You can release the blocked contacts from the blocking status.1{Menu} (middle soft key)2“Settings” i {Select}3“Blocked users” i {Select}4Select the desired user. i {Unblock}Temporary Confidential
Making/Answering Calls68 For assistance, please visit http://www.panasonic.com/phonehelpMaking callsUsing the Contacts listYou can make a Skype call by selecting a Skype contact from the Skype Contacts list.You must add Skype contacts in the Contacts list beforehand by using your handset or PC version of Skype. See “Adding contacts” on page 62.1While in Idle mode, press {CONTACTS}.2Select the desired Skype contact.LSkype contact and its current status icon (page 55) are displayed.3{{}LTo make a call using the speakerphone, press {s}.4When you finish talking, press {}}.Note:LIn step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}LIn step 2, you can also search for a contact by initial. Press the dial key ({0} – {9}) that corresponds to the first letter(s) of the contact you are searching for. When the list of contacts is displayed, select the desired contact.To call from the contact’s profileYou can also make a call while viewing the contact’s profile. In step 2, press {Select} to display the contact’s profile after you select the desired Skype contact, then press {{} or {s}.Using HistoryThe following are logged in History: last 50 missed calls, 20 incoming calls, 20 outgoing calls, 100 Voicemails and 20 Authorization requests.1{Menu} (middle soft key)2“History” i {Select}3Select the desired list. i {Select}4Select the desired log.Temporary Confidential
Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 695{{}LTo make a call using the speakerphone, press {s}.6When you finish talking, press {}}.Note:LIn step 1, you can also press {{} to access Outgoing calls list i {<} or {>} to switch between Outgoing calls, Incoming calls and Missed calls list, then skip to step 4.Making regular phone calls (SkypeOut)SkypeOut is a way to make calls from Skype to persons who use landline telephones or mobile phones. Making SkypeOut calls is not free of charge. Before using the SkypeOut, purchase the Skype credit on your Skype account page. For more information about SkypeOut, see the Skype website (http://www.skype.com/).1While in Idle mode, enter the phone number in the following way (even for local calls):“country code” + “area code” + “local phone number”Example (using the country code “1” for calling USA):+ 1 555 321 5555L“+” (international prefix) is automatically added.LIn case of some countries, delete “0” at the first digit of the area code.LTo correct a digit, press {CLEAR}.2{{}LTo make a call using the speakerphone, press {s}.3When you finish talking, press {}}.Using the speakerphone1During a conversation, press {s} to turn on the speakerphone.2When you finish talking, press {}}.Note:LUse the speakerphone in a quiet environment.LTo switch to the receiver, press {{}.Adjusting the receiver/speaker volumePress {^} or {V} repeatedly while talking.Temporary Confidential
Making/Answering Calls70 For assistance, please visit http://www.panasonic.com/phonehelpAnswering callsWhen a call is being received, the handset rings and the ringer indicator on the handset flashes rapidly.1Press {{} or {s}.2When you finish talking, press {}}.Note:LWhen a call is received while you are in the “Do Not Disturb” mode of the online Skype status (page 55), the handset does not ring. To change the Skype status, see “Change status” on page 59.LThe handset does not ring when the handset ringer is set to off or silent mode is set to on.Temporary ringer offWhile the handset is ringing, you can turn the ringer off temporarily by pressing {Silent}.Adjusting the ringer volume1{Menu} (middle soft key)2“Settings” i {Select}3“Tones” i {Select}4“Ring volume” i {Select}5Press {^} or {V} repeatedly to select the desired volume. i {OK}Rejecting the callWhile the handset is ringing, press {}}.Note:LPressing {}} to reject a call saves the log in Incoming calls list.Temporary Confidential
Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 71Diverting callsThis feature diverts incoming calls to the Voicemail box or other phone numbers that have been registered as the call divert destinations when you cannot answer the call within a certain amount of time or when you are offline.Setting the call divert destinationYou need to set specific phone numbers or the Voicemail box as the call divert destination in advance.Note:LIf no phone numbers are set as the call divert destination, unanswered calls are forwarded to the Voicemail box.LIf both other phone numbers and the Voicemail box are set as the destination, the unanswered calls will be forwarded to the other phone numbers first.LYou need to subscribe to the Skype Voicemail service to divert calls to the Voicemail box. You also need to subscribe to the SkypeOut service if you want to divert calls to landline or mobile phone numbers (SkypeOut numbers). If you do not subscribe to the Skype Voicemail and SkypeOut services, you can only divert incoming calls to a Skype contact.Diverting to other numbers:1{Menu} (middle soft key)2“Settings” i {Select}3“Call divert” i {Select}4“Call forwarding” i {Select}5“Yes” i {Select}6Select the desired destination number field. i {Select}7Enter the Skype name or SkypeOut number. i {OK}8{OK}Note:LFor text entry, see page 49 for details.Temporary Confidential
Making/Answering Calls72 For assistance, please visit http://www.panasonic.com/phonehelpDiverting to Voicemail box:Voicemail is an automatic answering service offered by Skype. After you subscribe to this service, Skype Voicemail system will answer calls for you when you are offline or unavailable to answer the phone within about 15 seconds. Messages are recorded in Skype Voicemail box, not your handset. To listen to Voicemail messages, see “Listening to Voicemail messages” on page 73.Note:LPlease visit the Skype homepage for details: http://www.skype.com/1{Menu} (middle soft key)2“Settings” i {Select}3“Call divert” i {Select}4“Voicemail” i {Select}5“Yes” i {Select}To record a new Welcome message:1{Menu} (middle soft key)2“Settings” i {Select}3“Call divert” i {Select}4“Welcome message” i {Select}5{Options}6“Record new” i {Select}7Record your message after the beep (max. 1 minute).8Press {End} when finished.9{OK}Note:LTo play back the welcome message, press {Play} in step 5.LIn step 6, you can reset the Welcome message to default by selecting “Reset to default”. i {Select}Temporary Confidential
Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 73Skype VoicemailYou can receive Voicemail messages if you subscribe to Skype Voicemail service.You can also send Voicemail messages to contacts who have Skype Voicemail service.To receive Voicemail messages, you must set the call divert destination to “Voicemail” (page 72).Listening to Voicemail messagesThe handset lets you know that you have new Voicemail messages in the following ways:– Charge/Ringer indicator flashes for about 5 seconds.– A new Voicemail notification is displayed.– “ ” is displayed in Idle screen.– An incoming message tone is heard.1While a new Voicemail notification is displayed on the screen, press {View} to access the Voicemail list in “History”.2Select the desired Voicemail log. i {Options}3“Play” i {Select}LThe handset starts playing back the message.LPress {s} to switch to the speakerphone.LPress {{} to switch to the receiver if you are on the speakerphone.LPress {^} or {V} to adjust the volume.LPress {Stop} to stop the message.Note:LIn step 1, you can also access the Voicemail list by pressing the following:–{Menu} i “History” i {Select} i “Voicemails” i {Select}Temporary Confidential
Making/Answering Calls74 For assistance, please visit http://www.panasonic.com/phonehelpSending Voicemail messagesYou can send Voicemail messages using your Contacts list or Voicemail history.1{Menu} (middle soft key)2“Contacts” i {Select}3Select the desired contact. i {Select}4{Options}5“Send Voicemail” i {Select}6After the greeting message is played and the beep sounds, record your message.7Press {End} when you finish recording.8{OK}Note:LIn step 2, you can also select “History”. i {Select} i “Voicemail” i {Select}Temporary Confidential
Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 75Useful features during a callHoldThis feature allows you to put a call on hold.1Press {Hold} during a call.2To release the hold, press {Resume} or {{}.LTo release the hold while on the speakerphone, press {Resume} or {s}.MuteWhile mute is turned on, you can hear the other party, but the other party cannot hear you.To mute your voice, press {MUTE}.LTo return to the conversation, press {MUTE} or {{}.LTo return to the conversation on the speakerphone, press {MUTE} or {s}.Call WaitingThis feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a Call Waiting tone.1Press {Answer} to answer the 2nd call after the tone.2To switch between calls, press {Switch}.3To resume conversation, press {Resume}.ConferenceYou can have a conversation with more than one person at the same time.When you receive a conference call, press {{} or {s}.LThe status bar at the top of the screen shows “Conference”.LTo reject the conference call, press {}}.Note:LYou cannot be a host in conference calls but can only be a guest.Temporary Confidential
Making/Answering Calls76 For assistance, please visit http://www.panasonic.com/phonehelpDTMFYou can send DTMF tones while on a call in order to access paging, computerized home banking, etc.While on a call, press {0} – {9}, {*} or {#}.Temporary Confidential
Managing HistoryFor assistance, please visit http://www.panasonic.com/phonehelp 77HistoryThe following events are logged in History: 50 missed calls, 20 incoming calls, 20 outgoing calls, 100 Voicemails and 20 Authorization requests. These logged events are listed in the chronological order, most recent first. 1{Menu} (middle soft key).2“History” i {Select}3Select the desired list. i {Select}4Press {V} to search from the most recent log, or {^} from the oldest.LTo view the log, press {Select}.LTo call back, press {{} or {s}.LTo access options, press {Options} and select the desired option. i {Select}*1 Not available for Authorization logs.*2 Not available for Voicemail logs.*3 Available only for Voicemail logs.Note:LIn step 1, you can also press {{} to access Outgoing calls list. i {<} or {>} to switch between Outgoing calls, Incoming calls and Missed calls list, then skip to step 4.LThe logs that have not been viewed are displayed with a new missed call icon “ ”.Send Voicemail*1 Sends Voicemail to the contact.Delete*1 Deletes the log.View profile*1 Shows the profile of the contact.Add to contacts*1 Adds the contact to your Contacts list.Clear list*1*2 Deletes the entire list.Play*3 Plays the Voicemail (page 73).My greeting*3 Plays back the Voicemail welcome message. Press {Options} for more options: “Record new” and “Reset to default”.Temporary Confidential
Managing History78 For assistance, please visit http://www.panasonic.com/phonehelpLTo access options while viewing the Voicemail or Authorization log, press {Options} and select the desired option. i {Select}*1 Available only for Voicemail logs.*2 Available only for Authorization logs.Block user*1 Blocks the contact.Unblock user*1 Unblocks the contact.Request auth.*1 Sends an Authorization request to the contact.Accept*2 Accepts the Authorization request from the contact.Decline*2 Declines the Authorization request from the contact.Temporary Confidential
Personal Skype Status and SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 79Personal Skype status and profileSkype status and profile features allow you to define your Skype online status and personal profile details, and to sign out of Skype. Changing your statusYou can change your Skype online status to let other users know when to call you.1While in Idle mode, press {Options}.2“Change status” i {Select}3Select the desired Skype status. i {Select}LSee the Skype status icon list on page 55.Note:LIn step 1, you can also press {Menu} (middle soft key). i {Select} i “Status” i {Select}Setting your profileYou can enter your profile data in My profile. In your public profile, you do not need to fill in all the fields; however, your country and city information will be helpful for others to identify you.1While in Idle mode, press {Options}.2“My profile” i {Select}3Select the desired setting. i {Select}4Fill in the fields or select the desired item of My profile information. i {OK}/{Select}Note:LIn step 1, you can also press {Menu} (middle soft key). i {Select} i “Status” i {Select}LYou need to sign in to Skype to access “My profile”.Details shown to all Allows you to enter your profile details open to public.Set your profile so that other Skype users can identify you.Private details Allows you to enter your private details.Temporary Confidential
Personal Skype Status and Settings80 For assistance, please visit http://www.panasonic.com/phonehelpLFor text entry, see page 49 for details.Signing out of SkypeThis feature signs you out of Skype. However, if you sign out, your Contacts list will not be available.1While in Idle mode, press {Options}.2“Sign out” i {Select}3Press {OK} when confirmation message appears.Note:LIn step 1, you can also press {Menu} (middle soft key). i {Select} i “Status” i {Select}Temporary Confidential
Personal Skype Status and SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 81Personal Skype settingsPersonal Skype settings allow you to define your password, and protect your privacy by restricting incoming calls to only the specified types of calls.Changing your passwordThis feature changes the password to sign in to Skype.1{Menu} (middle soft key)2“Settings” i {Select}3“General” i {Select}4“Change password” i {Select}5Enter your current password. i {OK}6Enter your new password. i {OK}7Repeat the new password. i {OK}Important:LPlease keep your password securely.Note:LFor text entry, see page 49 for details.Temporary Confidential
Personal Skype Status and Settings82 For assistance, please visit http://www.panasonic.com/phonehelpPrivacy settingsThis feature allows you to restrict incoming calls to only those from the specified types of callers.1{Menu} (middle soft key)2“Settings” i {Select}3“Privacy” i {Select}4Select “Calls” or “SkypeIn calls”. i {Select}5Select the desired type of callers that you want to receive calls from. i {Select}When you select “Calls” in step 4:Anyone All Skype usersOnly contacts Only Skype contacts listed in your Contacts listOnly authorized Only authorized Skype contacts listed in your Contacts listWhen you select “SkypeIn calls” in step 4:Anyone All SkypeIn callersKnown numbers Only SkypeIn callers notifying of their numbersOnly contacts Only non Skype contacts listed in your Contacts listTemporary Confidential
Handset SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 83Wi-Fi network settingsNetwork menu allows you to set the handset to connect to wireless networks when the handset is powered on. You need to configure network settings only when you want to use an access point other than the KX-WPA102 base unit.Finding wireless networksThe handset searches for networks within the area to connect to the desired network.1{Menu} (middle soft key)2“Settings” i {Select}3“Network” i {Select}4“Networks in range” i {Select}5Select the desired network. i {Connect}LThe padlock icon indicates a secure network.LWhile viewing the list, you can also press {Options} to select the desired setting. i {Select}Note:LIn step 1, you can also press {Options} while in Idle mode to access the list of networks in range, then skip to step 5.Network details Shows the selected network details.Search again Searches for other networks in range.Add manually Adds the network to your Preferred networks list.Preferred networks Shows your Preferred networks list.Temporary Confidential
Handset Settings84 For assistance, please visit http://www.panasonic.com/phonehelpPreferred networksPreferred networks manages the networks stored in the handset and allows you to connect to the network you usually use.1{Menu} (middle soft key)2“Settings” i {Select}3“Network” i {Select}4“Preferred networks” i {Select}5Select the desired network. i {Select} to view the network properties.LWhile viewing the list, you can also press {Options} to select the desired setting. i {Select}Auto-connect to open networksAuto-connect allows you to decide whether to connect to open networks automatically.An open network is one that is not encrypted, so that anyone within the vicinity can connect to the network without any password.1{Menu} (middle soft key)2“Settings” i {Select}3“Network” i {Select}4“Auto-connect” i {Select}5Select {Yes} or {No} to decide whether you want to auto-connect to open networks. i {Select}Add current Adds the currently connected network to your Preferred networks list.Add manually Adds networks manually to the list.Move up Moves the selected network up in the list.Move to top Moves the selected network to the top of the list.Move down Moves the selected network down in the list.Remove network Removes the selected network from the list.Remove all networks Removes all the networks from the list.Temporary Confidential
Handset SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 85General settingsAuto sign inAuto sign in allows you to sign in to Skype automatically when the handset is starting up.1{Menu} (middle soft key)2“Settings” i {Select}3“General” i {Select}4“Auto sign in” i {Select}5Select “Automatically” or “Manually”. i {Select}Updating softwareThis feature updates the Skype application or Panasonic firmware in the handset.1{Menu} (middle soft key)2“Settings” i {Select}3“General” i {Select}4“Software updates” i {Select}To update the Skype application:5Press {OK} to update the application if a new version is available.6Plug the CHARGE cable into the handset and the base unit for battery charging (page 45) if the battery is not fully charged. i {OK}7Read and accept the Skype agreement. i {Yes}8{OK}LThe handset begins to restart.To update the Panasonic firmware:5Start up the Web browser on your computer connected to the LAN port on the base unit.Temporary Confidential
Handset Settings86 For assistance, please visit http://www.panasonic.com/phonehelp6Handset:Press {OK} to update the firmware if a new version is available.7Handset:Plug the CHARGE cable into the handset and the base unit for battery charging (page 45) if the battery is not fully charged. i {OK}8Handset:Enter your PIN code if prompted.9Computer: Enter the URL displayed on the handset in the address field of your browser and press ENTER key.10 Computer:Enter the user name and the password (shown on the handset display) when prompted. 11 Computer:Follow the on-screen instructions of the Web Update Firmware page on your browser.LThe handset starts downloading the updated Panasonic firmware.12 Handset:Press {OK} to restart the handset.LThe handset begins to restart.To receive software update notification:You can allow the handset to notify you of software updates.1{Menu} (middle soft key)2“Settings” i {Select}3“Advanced” i {Select}4“Software updates” i {Select}5Select “Yes” or “No”. i {Select}Temporary Confidential
Handset SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 87ResetThis feature resets all the handset settings or all except the network settings.1{Menu} (middle soft key)2“Settings” i {Select}3“General” i {Select}4“Reset” i {Select}5Select “Keep network” or “Reset all”. i {Select}6{Yes}7Enter your handset PIN code if prompted. i {OK}LThe handset begins to restart after 3 seconds.Note:LIf you select “Reset all” in step 5, you need to register the handset to the base unit. See “Registering the handset” on page 93 for details.Keep network Resets all the handset settings except “Preferred networks”, “Auto-connect” and “Network proxy”.Reset all Resets all the handset settings. However, the contacts stored on your PC version of Skype Contacts list will be downloaded and displayed on your handset’s Contacts list when you sign in to Skype with the handset.Temporary Confidential
Handset Settings88 For assistance, please visit http://www.panasonic.com/phonehelpTonesYou can change the handset’s ringer type, tone and volume, and other types of tones.1{Menu} (middle soft key)2“Settings” i {Select}3“Tones” i {Select}4Select the desired setting. i {Select}5Select the desired item. i {Select} or change the setting by pressing {^} or {V}. i {OK}Ring type Sets the ringer type: “Ringing” or “Ring once”.Ring tone Sets the desired ringer tone.Ring volume Adjusts the ringer volume.Notification tone Sets the notification tone to “On” or “Off”.Keypad tone Sets the keypad tone to “On” or “Off”.Out of service tone Sets the out-of-service tone to “On” or “Off”.Hold tone Sets the desired hold tone.Temporary Confidential
Handset SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 89Phone settingsHandset PIN locked:This feature locks the handset with the PIN code for security purpose.1{Menu} (middle soft key)2“Settings” i {Select}3“Phone settings” i {Select}4“HS PIN locked” i {Select}5Enter the handset PIN code (4 digits).6{Yes}LThe handset is locked.7{OK}Note:LThe default PIN code is “0000”.Changing handset PIN:This feature changes the handset PIN code.1{Menu} (middle soft key)2“Settings” i {Select}3“Phone settings” i {Select}4“Change HS PIN” i {Select}5Enter the current handset PIN code.6Enter the new handset PIN code (4 digits).7Repeat the new handset PIN code.8{OK}Temporary Confidential
Handset Settings90 For assistance, please visit http://www.panasonic.com/phonehelpBrightness:This feature adjusts the brightness of the screen.1{Menu} (middle soft key)2“Settings” i {Select}3“Phone settings” i {Select}4“Brightness” i {Select}5Press {<} or {>} to adjust the brightness.6{OK}Battery saving: This feature allows you to decide whether you want to save the battery.1{Menu} (middle soft key)2“Settings” i {Select}3“Phone settings” i {Select}4“Battery saving” i {Select}5Select {Yes} or {No} to decide whether you want to save the battery.Note:LIn step 5, selecting {No} may reduce talk delay, but shortens talking time.Handset InformationInformation shows the device information such as product ID, software/firmware version and MAC address.1{Menu} (middle soft key)2“Settings” i {Select}3“Information” i {Select}Temporary Confidential
Handset SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 91Advanced settingsNetwork proxy:Network proxy allows you to decide whether you want to use proxy servers on the LAN for Skype traffic.1{Menu} (middle soft key)2“Settings” i {Select}3“Advanced” i {Select}4“Network proxy” i {Select}5Select the desired item. i {Select}6Enter the information. i Press {OK} or select the desired item. i {Select}7{Save}Note:LFor text entry, see page 49 for details.Proxy type Selects the proxy server type from “None”, “HTTP/HTTPS” or “SOCKS5”.Host Specifies the proxy server name (max. 100 characters).Port Specifies the proxy port number used by the proxy server (value: 1–65535).Authentication Enables or disables the proxy authentication which requires the user name and password to access the Internet.User name Specifies the user name for proxy host authentication (max. 127 characters).Password Specifies the password for proxy host authentication (max. 127 characters).Temporary Confidential
Services92 For assistance, please visit http://www.panasonic.com/phonehelpService informationYou can view the information of the following optional services by Skype: Skype credit, SkypeIn and Skype Voicemail.Note:LSkypeIn numbers are regular phone numbers sold on a subscription basis. If your friends who are not using Skype want to call you, they can call your SkypeIn number and you receive the call in Skype.If you buy a SkypeIn number, you get a free Skype Voicemail subscription along with it.LTo purchase Skype credit or SkypeIn with Skype Voicemail, visit http://www.skype.com/Viewing the service information1{Menu} (middle soft key)2“Services” i {Select}3Select the desired item. i {Select}4If you select “Skype credit” or “Voicemail”, view the information. i Press {V} to scroll down for more information.If you select “SkypeIn”, select the desired number. i {Select} i View the information. i Press {V} to scroll down for more information.Skype credit Shows the remaining Skype credit available and the expiration date.SkypeIn Shows the list of the SkypeIn numbers you subscribe to.If you subscribe to only one SkypeIn number, the number is displayed with its expiration date.Voicemail Shows the expiration date of the Skype Voicemail service.Temporary Confidential
Handset LocatorFor assistance, please visit http://www.panasonic.com/phonehelp 93Registering the handsetThe handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, or after you reset all the handset settings (page 87), register the handset.1{Menu} (middle soft key)2“Settings” i {Select}3“Phone settings” i {Select}4“HS registration” i {Select}5Press and hold LOCATOR button on the base unit for 3 seconds. i {OK}6{OK}Note:LIn step 4, select “Information” to view the network name and BSSID information of the base unit. i {Select}LYou cannot register additional handsets to the base unit.LWhile the handset is being registered, the LOCATOR indicator on the base unit is flashing.LOCATOR buttonLOCATOR indicatorTemporary Confidential
Handset Locator94 For assistance, please visit http://www.panasonic.com/phonehelpLocating the handsetYou can locate the misplaced handset by paging it from the base unit.1Base unit:Press LOCATOR button to page the handset.LThe LOCATOR indicator on the base unit lights up.LThe handset beeps for 1 minute, and the display, keypad and ringer indicator light up.2Base unit:To stop paging, press LOCATOR button.ORHandset:To stop paging, press any key except {CONTACTS}, {*}, {#}, Navigator key and Middle soft key.Note:LThe handset locates only the registered handset.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 95Setting the base unit from Top MenuAfter the settings in Initialization Wizard (page 27) are successfully completed, Top Menu will be displayed on the top page each time you log in the base unit.1Open your Web browser on your computer connected to the LAN (Ethernet) port on the base unit.2Enter http://192.168.0.242/ (the base unit’s default IP address) or http://kx-wpa.webpage in the address field of your browser and press ENTER key. You can also double click the KX-WPA102 icon in My Network Places in Start menu when using Windows XP and UPnP is enabled. See “Setting UPnP to display the shortcut” on page 153 for details.LA screen with fields for your user name and password is displayed.Temporary Confidential
Base Unit Settings96 For assistance, please visit http://www.panasonic.com/phonehelp3Enter the user name and password you set in Initialization Wizard.LTop Menu is displayed.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 97Network ConnectionCreating a new profile of network connection1Click [Network Connection] on Top Menu.2Click [New Profile] under the Network Connection heading.Temporary Confidential
Base Unit Settings98 For assistance, please visit http://www.panasonic.com/phonehelp3Enter the profile name.4Select the mode, then click [Next>].5Select the connection mode, then click [Next>].6Configure the connection mode you select in step 5, then click [Next>]. LSee “Configuring the Internet connection settings” on page 36 for instructions.7Confirm the settings you are about to save, then click [Save].8Click [Restart].LThe base unit restarts in the connection mode that is registered as HOTEL or HOME mode profile you have just created (The position of the Mode selector switch determines the connection mode.).Modifying the existing network connection profile1Click [Network Connection] on Top Menu.2Click [Modify] under the Network Connection heading.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 993Select the profile you wish to modify from the pull-down menu under the Select Profile heading, then click [Edit].LTo delete a profile, select the desired profile from the pull-down menu and click [Delete].4Configure the connection mode of the profile you select in step 3, then click [Next>].LSee “Configuring the Internet connection settings” on page 36 for instructions.5Confirm the settings you are about to save, then click [Save].6Click [Restart].LThe base unit restarts in the connection mode that is registered as HOTEL or HOME mode profile you have just created (The position of the Mode selector switch determines the connection mode). However, editing AP (Bridge) mode profile while the Mode selector is switched to “HOTEL” does not restart the base unit in AP (Bridge) mode profile.Note:LIn step 3, if you delete the profile you are currently using for HOTEL or HOME mode, the profile will be reset to the default setting (DHCP).Temporary Confidential
Base Unit Settings100 For assistance, please visit http://www.panasonic.com/phonehelpModifying the wireless information1Click [Network Connection] on Top Menu.2Click [Modify] under the Wireless Information heading.3Configure the wireless connection basic settings, then click [Next>].4Configure the wireless connection security settings, then click [Save].5Click [Restart].Setting Description[Mode] LSelect your wireless network mode from the pull-down menu.[Channel] LSelect [Auto] or the desired channel from [1] to [11].[Network Name (SSID)]LEnter your wireless network name (SSID) in this data field.[Broadcast SSID] LEnable or disable the setting to broadcast your SSID.Setting Description[Security Mode] LSelect the desired Security Mode.[WPA-PSK/WPA2-PSK Data Encryption]LSelect the desired Data Encryption method.[Network key] LEnter the network key containing 10 hexadecimal, 26 hexadecimal, 5 alphanumeric or 13 alphanumeric characters.LPress [View] to display the network key.[Session-Key renewal interval]LSet the interval for refreshing the encryption key between 30 and 604800 seconds. 604800 seconds is the equivalent of one week.[Key Index] LSelect [Key 2] or [Key 3] to be used if you use WEP.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 101Updating the firmwareTo prevent leaks of customer information, illegal operation of this product, interference or involuntary shutdown etc., update firmware regularly. The most recent firmware file can be found on Panasonic’s Support Website (http://panasonic.biz).1Click [Update Firmware] on Top Menu.2Check for the latest version by clicking the support information URL.3If the version is updated, download the updated firmware to your PC.4Enter the file name of the downloaded firmware under the “Update Firmware” heading.LYou can also click [Browse...] to select the firmware file name from the list.5Click [Update].LThe base unit automatically restarts after the firmware is updated.Temporary Confidential
Base Unit Settings102 For assistance, please visit http://www.panasonic.com/phonehelpImportant:LDo not interrupt the firmware updating process by cutting the power supply until the updating is complete and the base unit restarts itself.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 103Advanced Setup1Click [Advanced Setup] on Top Menu.2Click the desired tab, then click the desired item from the menu on the left side.*1 While in AP (Bridge) mode, Interface Status is displayed instead of WAN Interface Status and LAN Interface Status.*2 While in AP (Bridge) mode, these menus are not available.Tab Menu Sub-menu1 Sub-menu2 PageStatus Network Status WAN Interface Status*1 106LAN Interface Status*1Routing TableARP TableDHCP Lease Table DHCP Server Status*2 107DHCP Lease Table*2UPnP Port Mapping Table UPnP Status*2 108UPnP Port Mapping Table*2Wireless Status – 108Handset Status – 109Version Information –109Save Status – 110Basic Internet Connection Profiles 111Profiles SelectionMAC Address Clone –112Temporary Confidential
Base Unit Settings104 For assistance, please visit http://www.panasonic.com/phonehelpAdvanced LAN/DHCP Server LAN 113DHCP ServerStatic DHCP (IP Address Reservation) 115Port Forwarding Port Forwarding Table Port Forwarding Setting 116DMZ – 118UPnP – 119Packet Filtering Packet Filtering Table Packet Filtering Setting 120Easy Security Easy-To-Use Filtering 123Routing Static Routing Table Routing Setting 124Wireless Wireless Basic Wireless Mode 126SSIDAuthentication/Encryption Authentication/Encryption 127Network Key (WPA-PSK/WPA-PSK)Network Key (WEP)MAC Address Filtering MAC Address Filtering 129MAC Address Filtering Table MAC Address Filtering SettingTab Menu Sub-menu1 Sub-menu2 PageTemporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 105Maintenance Password – 131Update Firmware – 132Reset to Factory Default –134Save Settings – 135Loading Settings – 136Restart – 137Packet Filtering Log –138UPnP Port Mapping Log –139Connection Log – 140Support Help – 141Support Link – 142Tab Menu Sub-menu1 Sub-menu2 PageTemporary Confidential
Base Unit Settings106 For assistance, please visit http://www.panasonic.com/phonehelpStatus1Click the [Status] tab, then click the desired item on the left.[Network Status] Shows the WAN/LAN interface status, and routing and ARP tables.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 107[DHCP Lease Table] Shows the DHCP server status and lease table.Temporary Confidential
Base Unit Settings108 For assistance, please visit http://www.panasonic.com/phonehelp[UPnP Port Mapping Table] Shows the UPnP status and port mapping table.[Wireless Status] Shows the wireless LAN status.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 109[Handset Status] Shows the handset connection status.Note:LIt may take a while to display this screen in order to check if the handset is connected.[Version Information] Shows the firmware version information.Temporary Confidential
Base Unit Settings110 For assistance, please visit http://www.panasonic.com/phonehelp[Save Status] Allows you to save the status.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 111Basic settingInternet Connection:This feature allows you to select and configure the Internet connection mode.1Click [Advanced Setup] on Top Menu.2Click the [Basic] tab, then click [Internet Connection].3Under the Profiles heading, click the entry number of the desired Internet connection profile to configure the Internet connection mode of the desired profile.4Click the desired Internet connection mode under the Connection Mode heading.5Configure the Internet connection mode you select in step 4, then click [Save].LSee “Configuring the Internet connection settings” on page 36.6Click [Restart].Note:LIn step 3, you can set both the Home and Hotel modes to the desired profile by selecting the profile from the respective pull-down menus under the Profile Selection heading.Temporary Confidential
Base Unit Settings112 For assistance, please visit http://www.panasonic.com/phonehelpLIn step 5, if you click [Save] after creating or modifying the profile currently selected for HOME or HOTEL mode, the profile setting screen will be displayed.MAC Address Clone:MAC (Media Access Control) Address Clone allows you to clone the MAC address of your PC’s network adaptor onto this product.A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some Internet service providers require that you register the MAC address of your computer’s network adaptor, which was connected to your cable or DSL modem during installation.1Click [Advanced Setup] on Top Menu.2Click the [Basic] tab, then click [MAC Address Clone].3Configure the settings, then click [Save].4Click [Restart].Setting Description[MAC Address Clone] LSelect whether the MAC address clone feature is enabled or disabled.[Original MAC Address] LBase unit’s MAC address is displayed.[Cloned MAC Address] LEnter MAC address to be cloned.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 113Advanced settingLAN / DHCP Server:This feature allows you to configure the local network settings and DHCP server settings.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [LAN / DHCP Server].Temporary Confidential
Base Unit Settings114 For assistance, please visit http://www.panasonic.com/phonehelp3Configure the settings, then click [Save].Note:LIf you change the LAN side network settings or DHCP server settings, the entries in Static DHCP table will be deleted.4Click [Restart].Setting Description[IP Address] LIf your network administrator specifies the private IP address and subnet mask, enter them in each data field.LSet 4 digits (0 – 255) and 3 periods such as “192.168.0.253”. But “0.0.0.0” and “255.255.255.255” are not available.[Subnet Mask][DHCP Server] LDHCP server assigns IP addresses to devices on your LAN. Select whether to enable or disable this feature.[Starting IP Address]LEnter the starting IP address for the DHCP server’s IP assignment.[Number of Lease IP Address]LEnter the number of the lease IP address (maximum number: 5). The first IP address is assigned to the handset. The subsequent ones are assigned to PCs.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 115Static DHCP (IP Address Reservation):Static DHCP function allows you to stabilize the IP address assigned to the computer by registering the computer’s MAC address.1Click [Add] under the Static DHCP (IP Address Reservation) heading in LAN / DHCP Server page (page 113), then configure the settings.LYou can also select the setting from the DHCP Server Lease Table. Click [Add] in the “Operation” column of the table.2Click [Add].3Click [Restart].Note:LWhen you edit the static DHCP setting, click the desired entry number to edit the setting. Configure the settings, then click [Save].LWhen you delete a static DHCP setting, click the desired number, then click [Delete].Setting Description[MAC Address] LEnter the LAN card’s MAC address of the corresponding computer.[IP Address] LEnter the IP address that you want to stabilize of the corresponding computer.Temporary Confidential
Base Unit Settings116 For assistance, please visit http://www.panasonic.com/phonehelpPort Forwarding:This feature allows you to configure the port forwarding settings. Port Forwarding feature enables other Internet users to access services running on your LAN.Up to 10 settings can be stored.Important:LWhen setting up the port forwarding feature, there is a possibility of illegal access to the forwarding port from the Internet. For safety, set this feature only when required.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [Port Forwarding]. Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1173To add a new entry, click [Add] under the Portforwarding Table heading.LTo edit the setting, click the desired entry number under the Portforwarding Table heading.4Configure the settings under the Port Forwarding Setting heading, then click [Add] to add the new entry.LClick [Save] under the Port Forwarding Setting heading to save the edited settings.Setting Description[No.] LSelect the desired entry number for the port forward setting.[Status/Port Forwarding]LSelect whether the port forwarding feature is enabled or disabled.[Forwarding IP Address]LEnter the IP address of the computer that is hosting the service.LThe device registered as the forwarding IP address can be accessed from the Internet through the registered protocol and port.[Protocol] LSelect the desired protocol used to access your hosting service.Temporary Confidential
Base Unit Settings118 For assistance, please visit http://www.panasonic.com/phonehelpLWhen you delete the selected setting, click [Delete].5Click [Restart].DMZ:DMZ (DeMilitarized Zone) allows you to configure the DMZ settings. The DMZ feature allows you to expose a specified computer on your LAN to the Internet.Important:LComputers specified as the DMZ host may be vulnerable to security risks.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [DMZ].3Configure the settings, then click [Save].[Port] LEnter the forwarding port number.LIf you want to set one port, enter its port number only.LIf you want to set a range of ports, enter the port numbers in the following way: “2000 – 3000”Setting Description[DMZ] LSelect whether the DMZ feature is enabled or disabled.[DMZ Host IP Address]LEnter the IP address of the computer that is exposed to the Internet.Setting DescriptionTemporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1194Click [Restart].UPnP:UPnP (Universal Plug and Play) allows you to configure the UPnP settings. UPnP feature allows the base unit to be compliant with the UPnP standard.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [UPnP].3Select the desired setting, then click [Save].4Click [Restart].Setting Description[UPnP] LSelect whether the UPnP feature is enabled or disabled.Temporary Confidential
Base Unit Settings120 For assistance, please visit http://www.panasonic.com/phonehelpPacket Filtering:The Packet Filtering allows you to configure the packet filtering settings, and to control Internet access from the specified computers on your LAN.Up to 20 settings can be stored.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [Packet Filtering].Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1213To add a new entry, click [Add] under the Packet Filtering Table heading.LTo edit the setting, click the desired entry number under the Packet Filtering Table heading.Temporary Confidential
Base Unit Settings122 For assistance, please visit http://www.panasonic.com/phonehelp4Configure the settings under the Packet Filtering Setting heading, then click [Add] to add the new entry.LClick [Save] under the Packet Filtering Setting heading to save the edited settings.LWhen you delete the selected setting, click [Delete].5Click [Restart].Setting Description[No.] LSelect the desired entry number for the packet filtering setting.[Status/Packet Filtering]LSelect whether the packet filtering feature is enabled or disabled.[Action] LSelect whether to allow or deny IP packets that are being received.[Direction] LSelect [LiW] (filtering when sending to WAN) or [WiL] (filtering when receiving from WAN).[Source IP Address]LEnter the packet source IP address to be filtered.LIf you want to set one IP address, enter the IP address only.LIf you want to set a range of IP addresses, enter the network address (e.g. 192.168.0.0/16).LIf you want to set the KX-WPA102 IP address, enter “local”.LIf you want to set all IP addresses, enter “*”.[Source Port] LEnter the packet source port to be filtered.LIf you want to set one port, enter its port number only.LIf you want to set a range of ports, enter the port numbers in the following way: “2000 – 3000”.[Destination IP Address]LEnter the packet destination IP address to be filtered.LThe entry is the same as the Source IP Address.[Destination Port] LEnter the packet destination port number to be filtered.LThe entry is the same as the Source Port.[Protocol] LSelect the desired protocol used.[Log Output] LSet whether to display the temporarily saved packet information on the [Packet Filtering Log] (page 138).Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 123Easy Security:This feature allows you to easily set up packet filtering.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [Easy Security].Temporary Confidential
Base Unit Settings124 For assistance, please visit http://www.panasonic.com/phonehelp3Configure the settings, then click [Save].LCheck the box in the “Log Output” column to create a log of each action.4Click [Restart].RoutingThis feature allows you to set static routing destinations.1Click [Advanced Setup] on Top Menu.2Click the [Advanced] tab, then click [Routing].Setting Description[Transmission/reception of Packets with private IP addresses via WAN interface]LSelect whether to deny or allow packets to be sent or received when the source of an incoming (from WAN side) packet and the destination of an outgoing (to WAN side) packet are private addresses. This feature is valid when the WAN IP address is global. The default is set to Deny.[Stateful Packet Inspection]LSelect whether to enable or disable the stateful packet inspection feature.LSome E-mail servers authenticate clients using ident packets which use TCP port 113. If E-mail feature does not work well, select “Enable (Except Ident Packet)”, which is the default setting for this feature.[Attack Detection] LSelect whether to enable or disable the attack detection feature.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1253To add a new entry, click [Add] under the Static Routing Table heading.LTo edit the setting, click the desired number under the Static Routing Table heading.4Configure the settings under the Routing Setting heading, then click [Add].LClick [Save] under the Routing Setting heading to save the edited setting.5Click [Restart].Setting Description[Status] LSelect whether to enable or disable the routing setting.[Destination Network/Mask]LEnter the network/mask for the destination IP address.[Gateway] LEnter the gateway IP address.Temporary Confidential
Base Unit Settings126 For assistance, please visit http://www.panasonic.com/phonehelpWirelessWireless Basic:Wireless Basic allows you to set the wireless mode and SSID.1Click [Advanced Setup] on Top Menu.2Click the [Wireless] tab, then click [Wireless Basic].3Configure the settings, then click [Save].4Click [Restart].Setting Description[Mode] LSelect your wireless network mode from the pull-down menu.[Channel] LSelect [Auto] or the desired channel from 1 to 11.[Network Name (SSID)]LEnter your wireless network name (SSID) in this data field.[Broadcast SSID] LEnable or disable the setting to broadcast your SSID.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 127Authentication/Encryption:This feature allows you to set security measures for connecting to wireless LAN.1Click [Advanced Setup] on Top Menu.2Click the [Wireless] tab, then click [Authentication/Encryption].3Configure the settings, then click [Save].Setting Description[Security Mode] LSelect the desired Security Mode.[WPA-PSK/WPA2-PSK Data Encryption]LSelect the desired Data Encryption method.Temporary Confidential
Base Unit Settings128 For assistance, please visit http://www.panasonic.com/phonehelp4Click [Restart].Note:LIf you change either Network Name (SSID) or Network key, you need to register the handset to the base unit once again. See “Registering the handset” on page 93.[Network key] LEnter the network key containing 10 hexadecimal, 26 hexadecimal, 5 alphanumeric or 13 alphanumeric characters.LPress [View] to display the network key.[Session-Key renewal interval]LSet the interval for refreshing the encryption key between 30 and 604800 seconds. 604800 seconds is the equivalent of one week.[Key Index] LSelect [Key 2] or [Key 3] to be used if you use WEP.Setting DescriptionTemporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 129MAC Address Filtering:This feature allows you to configure MAC address filtering settings so that devices without the particular MAC address will be filtered.MAC address filtering is available only for wireless devices.1Click [Advanced Setup] on Top Menu.2Click the [Wireless] tab, then click [MAC Address Filtering].LTo add a new MAC address entry, click [Add] under the MAC Address Filtering Table heading. Enter the desired MAC address under the MAC Address Filtering Setting heading, then click [Add].LTo edit a MAC address entry, click the desired entry number under the MAC Address Filtering Table heading. Edit the MAC address under the MAC Address Filtering Setting heading, then click [Save].Temporary Confidential
Base Unit Settings130 For assistance, please visit http://www.panasonic.com/phonehelp3Configure the setting, then click [Save].4Click [Restart].Setting Description[MAC Address Filtering]LSelect whether to enable or disable the MAC address filtering feature.LIf MAC Address Filtering is enabled, only the wireless device with the registered MAC address can send/receive data.The registered handset is automatically listed in MAC Address Filtering Table.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 131MaintenancePassword:This feature allows you to change the user name and password that are required to access the base unit.Important:LMake a note of the user name and password so that you will not forget them.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Password].3Configure the settings, then click [Save].Setting Description[User Name] LThe user name and password can contain 6 to 15 characters (including numbers).LThe following cannot be used: [ “ ], [ ‘ ], [&], [<], [>], [(space)]LUser name and password must be different from each other.LUser name and password are case-sensitive.[Password][Retype Password]LEnter the password again to verify.Temporary Confidential
Base Unit Settings132 For assistance, please visit http://www.panasonic.com/phonehelp4Click [Restart].Update Firmware:This feature allows you to update the firmware to the latest version.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Update Firmware].3Check for the latest version by clicking the support information URL.4If the version is updated, download the updated firmware to your PC.5Enter the file name under the “Update Firmware” heading.LClick [Browse...] to select the desired file name from the list.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1336Click [Update].LThe base unit automatically restarts after the firmware is updated.Important:LDo not interrupt the firmware updating process by cutting the power supply until the updating is complete and the base unit restarts itself.Temporary Confidential
Base Unit Settings134 For assistance, please visit http://www.panasonic.com/phonehelpReset to Factory Default:The base unit settings can be reset to the base unit’s factory default. See page 145 for the default network settings.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Reset to Factory Default].3Click [Reset to Factory Default] to reset the base unit settings.4Click [OK].LThe base unit begins to restart.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 135Save Settings:A backup file can be saved on your computer. You can load the base unit settings from the backup file on “Load Settings” page (page 136).1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Save Settings].3Click [Save].4Specify the location and enter the file name, and click [Save] on the Save As dialog box.Temporary Confidential
Base Unit Settings136 For assistance, please visit http://www.panasonic.com/phonehelpLoad Settings:The base unit settings can be loaded from a backup file. If you reset the base unit settings to factory default, the Load Settings page can load its settings from the backup file.Note:LThe backup file has network settings. When the settings are loaded, the network settings except for the user name and password are also changed as they were saved.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Load Settings].3Enter the file name or click [Browse...] then select the backup file on the Choose file dialog box, and click [Open].4Click [Load].5Click [Restart].Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 137Restart:The Restart page can restart the base unit.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Restart].3Click [Restart].4Click [OK].Temporary Confidential
Base Unit Settings138 For assistance, please visit http://www.panasonic.com/phonehelpPacket Filtering Log:This feature displays the packet filtering logs that are temporarily saved, and saves the logs on your computer. This feature is enabled if [Log Output] in [Packet Filtering Setting] (page 122) is set to on.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Packet Filtering Log].LPacket filtering logs are displayed.3Click [Save].4Specify the location and enter the file name, and click [Save] on the Save As dialog box.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 139UPnP Port Mapping Log:UPnP Port Mapping Log displays the temporarily saved logs of port mapping additions, deletions and failures, and save the logs on your computer. This feature is enabled if [UPnP] (page 119) is set to Enable.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [UPnP Port Mapping Log].LUPnP port mapping logs are displayed.3Click [Save].4Specify the location and enter the file name, and click [Save] on the Save As dialog box.Temporary Confidential
Base Unit Settings140 For assistance, please visit http://www.panasonic.com/phonehelpConnection Log:Connection Log displays the temporarily saved logs of connection, disconnection and authentication during PPPoE or DHCP connection, and saves the logs on your computer.1Click [Advanced Setup] on Top Menu.2Click the [Maintenance] tab, then click [Connection Log].LConnection logs are displayed.3Click [Save].4Specify the location and enter the file name, and click [Save] on the Save As dialog box.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 141SupportHelp:The Help page describes each feature of the following items:1. Initialization Wizard2. Network Connection3. Update Firmware4. Advanced Setup5. Link for handset6. Status7. Basic8. Advanced9. Wireless10. Maintenance1Click [Advanced Setup] on Top Menu.2Click the [Support] tab, then click [Help].3Click [View].4Click the desired item to view its help page.Note:LYou can also view help by clicking [Help] on each setup page.Temporary Confidential
Base Unit Settings142 For assistance, please visit http://www.panasonic.com/phonehelpSupport Link:Support Link allows you to get product and support information from the Internet.1Click [Advanced Setup] on Top Menu.2Click the [Support] tab, then click [Support Link].3Click the URL for the desired information.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 143Link for handsetThis feature displays the registered handset's status of wireless connection to the base unit and the handset's MAC address and IP address when connected to the base unit.1Click [Link for hand-set] on Top Menu.LThe handset status is displayed when the registered handset is wirelessly connected to the base unit.Note:LIt may take a while to display the screen.Temporary Confidential
Base Unit Settings144 For assistance, please visit http://www.panasonic.com/phonehelpMode selectorOnce you have set up the Initialization Wizard (page 27) in the base unit settings, you do not need to log in the base unit each time. You only need to slide the Mode selector switch to choose between “HOME” or “HOTEL” mode so that the base unit can connect to the Internet in the connection mode that is pre-registered for either “HOME” or “HOTEL” mode.Mode selectorTemporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 145Reset buttonIf you forget the user name and password, press and hold “FACTORY DEFAULT RESET” button on the bottom of the base unit with a pointed object until all the indicators go out. The network settings are reset to default (see below). If necessary, set the settings again.Default network settingsInternet Connection TypeWireless Connection SettingsConnection Mode DHCPMTU size– PPPoE 1492 bytes– DHCP 1500 bytes– Static 1500 bytesWireless Mode 802.11b/gNetwork Name (SSID) (Displayed on the included WLAN sticker)Broadcast SSID EnableWEP key (Displayed on the included WLAN sticker)Network key for WPA-PSK/PSK2 (Displayed on the included WLAN sticker)Security Mode WPA2-PSK/WPA-PSK/WEPWPA-PSK/WPA2-PSK Data Encryption TKIP+AESMAC Address Filtering DisableFACTORY DEFAULT RESETTemporary Confidential
Base Unit Settings146 For assistance, please visit http://www.panasonic.com/phonehelpAdvanced SetupLAN– IP Address 192.168.0.242– Subnet Mask 255.255.255.0DHCP Server– DHCP Server Enable– Starting IP Address 192.168.0.100– Number of Lease IP Address 5 (One of which is assigned to the handset)DMZ– DMZ Disable– DMZ Host IP Address (Blank)UPnP EnablePacket Filtering UnsetEasy Security– Sends/Receives packets to/from IP address Deny– Stateful Packet Inspection Enable (Except Ident Packets)– Attack Detection DisableRouting– Static Routing UnsetTemporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 147Setting your computerObtaining an IP address automatically on your computerWhen you cannot log in the base unit by using the computer connected to the Ethernet (LAN) port on the base unit, check the setting of Local Area Connection of the computer. It is necessary to obtain an IP address automatically from a DHCP server.LYou must be logged in as an administrator in order to set the Local Area Connection.1Click [Start], then click [Control Panel].2Click [Network and Internet Connections], then click [Network Connections].3Right-click the Local Area Connection icon connected to the base unit, then select [Properties].4Select [Internet Protocol (TCP/IP)], then click [Properties].Temporary Confidential
Base Unit Settings148 For assistance, please visit http://www.panasonic.com/phonehelp5Select [Obtain an IP address automatically].6Click [OK].7Click [OK], then close the Network Connection window.Setting the static IP address on your computerWhen you log in the base unit with its firmware being defective, the firmware update screen will be displayed. In this case, a static IP address needs to be set on your computer.1Click [Start], then click [Control Panel].2Click [Network and Internet Connections], then click [Network Connections].3Right-click the Local Area Connection icon connected to the base unit, then select [Properties].Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 1494Select [Internet Protocol (TCP/IP)], then click [Properties].5Select [Use the following IP address].Temporary Confidential
Base Unit Settings150 For assistance, please visit http://www.panasonic.com/phonehelp6Enter the IP address.LThe IP address must be within the range of 192.168.0.1-192.168.0.254 except for 192.168.0.242 (the default IP address of the base unit on the LAN interface).7For Subnet mask, enter 255.255.255.0.8Click [OK].9Click [OK], then close the Network Connection window.10 On the Web browser, enter http://192.168.0.24211 Click [Advanced Setup] on Top Menu.12 Click the [Maintenance] tab, and then click [Update Firmware].13 Check for the latest version by clicking the support information URL.14 If the version is updated, download the updated firmware to your computer.15 Specify the file name.You can also click [Browse...] to select the desired file name from the list.16 Click [Update].LThe base unit automatically restarts after the firmware is updated.Important:LDo not interrupt the firmware updating process by cutting the power supply until the progress indicator reaches 100% and the base unit restarts itself.17 Confirm that WAN Indicator is not flashing in amber, then set your computer setting back to the previous condition.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 151Changing the proxy server settings on Web browserIf your Internet service provider uses the proxy server, you cannot log in the base unit. Change the proxy server settings on your Web browser.1Open your Web browser. (The example is Internet Explorer 6.0.)2Click [Tools], then select [Internet Options...].3Click [Connections] tab, then click [LAN Settings…].Temporary Confidential
Base Unit Settings152 For assistance, please visit http://www.panasonic.com/phonehelp4See if the “Use a proxy server for your LAN” check box is checked or not.NIf checked, click [Advanced…] and go to step 5.NIf not checked, click [Cancel] then close the Internet Options window. Proxy server settings are not required.5Enter the base unit’s IP address into the “Do not use proxy server for addresses beginning with:” data field.6Click [OK].7Click [OK], then close the Internet Options window.Temporary Confidential
Base Unit SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 153Setting UPnP to display the shortcutTo display the KX-WPA102 shortcut in the My Network Places folder, Windows component should be added. Enable UPnP (Universal Plug and Play) following the steps below.1Click [Start], then click [Control Panel].2Click [Add or Remove Programs], then click [Add or Remove Windows Components].3Select [Network Service], then click [Details…].4Check [Universal Plug and Play], then click [OK].5Click [Next>].Note:LIf you are using Windows XP Service Pack 2, check [Internet Gateway Device Discovery and Control Client] and [UPnP User Interface] in step 4.Using your computer on a wireless LANThe 15 character device-specific Network name (SSID), 13 alphanumeric character 128 bit encryption Network key (WEP) and 16 alphanumeric character Network key (WPA-PSK/WPA2-PSK) are set as factory default. These factory default setting values are displayed on the included WLAN sticker. If you use your computer on a wireless LAN, use the values on the sticker to set the wireless LAN configuration of your computer. To set your computer to be used on a wireless LAN, see the manual for the computer you use.Note:LTo use your computer on a wireless LAN, a wireless LAN card needs to be installed on your computer.Temporary Confidential
Useful Information154 For assistance, please visit http://www.panasonic.com/phonehelpAdditional accessoriesSales and support informationLTo order additional accessories, call 1-800-332-5368.LTTY users (hearing or speech impaired users) can call 1-866-605-1277.Headset (optional)Connecting a headset to the handset allows hands-free phone conversations. We recommend using the Panasonic headset shown below.LThe headset model numbers compatible with KX-WPA100 handset:KX-TCA88HAKX-TCA86KX-TCA91KX-TCA92KX-TCA93KX-TCA94KX-TCA95Temporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/phonehelp 155Error messagesIf the unit detects a problem, one of the following messages is shown on the display.Display message Cause/solutionNetworks were not found.LMove closer to the base unit, or move to the Wi-Fi coverage area of the hotspot.LPress {Retry} to search for networks again.LPress {Options}. i Select “Add manually” or “Preferred networks”.Could not connect to <SSID name>LA network connection is failed.LPress {OK} to search for networks again.Your skype name and password were not recognized.LThe Skype name and password you enter are incorrect.LPress {Retry} and enter the correct name and password.Sign in was not successful.LCheck to see if your ISP is having network connection issues in your area.Network connection lost.LThe handset has lost communication with the base unit or hotspot.LMove closer to the base unit, or move to the Wi-Fi coverage area of the hotspot.LPress {OK}. i Select “Find network”.Please try again later.LAn unexpected error has occurred.LPress {OK} to return to Idle screen or the previous screen.Failed. Try again later.LYour authorization request has been failed.LPress {OK} and try again.Invalid password. LYour password is not within 4 – 20 characters.LEnter your password again.The Handset could not register. Please try again.LPress {OK}. i Press and hold the Handset locator on the base unit for 3 seconds again.Temporary Confidential
Useful Information156 For assistance, please visit http://www.panasonic.com/helpFCC and other informationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the base unit and all person’s body (excluding extremities of hands, wrist and feet). LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.Temporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/help 157LFor body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Responsible party:Panasonic Corporation of North AmericaOne Panasonic Way,Secaucus, New Jersey 07094Phone number: 1-800-211-PANA (1-800-211-7262)FCC Warning:To ensure compliance with FCC emissions limits, use only the included charge cablewith the ferrite core when connecting the handset to the base unit.Temporary Confidential
Useful Information158 For assistance, please visit http://www.panasonic.com/helpIndustry Canada (IC) and other informationThe term “IC:” before the radio certification number only signifies that Industry Canada radio technical specifications were met.Notice:Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.RF Exposure Warning:LThis product complies with IC radiation exposure limits set forth for an uncontrolled environment. LTo comply with IC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the base unit and all person's body (excluding extremities of hands, wrist and feet). LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.LFor body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with IC RF exposure requirements.Environment:Do not install the unit where the temperature is less than 0 °C (+32 °F) or greater than +40 °C (+104 °F). Allow 10 cm (4 inches) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.Routine care:Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, disconnect the AC adaptor from the outlet.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.No responsibility will be taken by our company with respect to consequences resulting from the inappropriate use, damage or both of the unit.Temporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/phonehelp 159Règles d’Industrie Canada et autres renseignementsL’acronyme « IC » placé devant le numéro d’homologation indique seulement que l’appareil satisfait aux spécifications de Industrie Canada.Avis:L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.Avertissement de risque d’exposition au rayonnement radiofréquence:Ce produit est conforme aux normes d’Industrie Canada concernant les limites d’exposition au rayonnement radiofréquence en milieu non contrôlé. Pour assurer la conformité aux exigences de IC quant à l’exposition au rayonnement RF, l’appareil doit être installé et opéré de manière que son appareil soit à une distance d’au moins 20 cm (8 pouces) de toute personne (à l’exclusion des extrémités des mains, des poignets et des pieds). L’appareil ne doit être installé ni opéré de concert avec aucune autre antenne ni aucun autre émetteur.Conditions ambiantes:Ne pas installer l’appareil dans un endroit où la température est inférieure à 0 °C (+32 °F) ou supérieure à +40 °C (+104 °F).Prévoir un jeu d’au moins 10 cm (4 po) autour de l’appareil en vue d’assurer une aération adéquate. Éviter l’exposition à la fumée, la poussière, la vibration, les chocs et aux rayons solaires directs.Entretien de routine:Essuyer l’appareil avec un linge doux. Ne jamais utiliser de benzène, solvant ou toute poudre abrasive.S’il est prévu que l’appareil ne sera pas utilisé pendant une période prolongée, débrancher l’adaptateur secteur.MISE EN GARDE:Toute modification non expressément approuvée par la partie responsable de la conformité de l’appareil pourrait entraîner la révocation du privilège d’utiliser l’appareil.Notre compagnie n’assume aucune responsabilité quant aux conséquences résultant de l’utilisation de l’appareil ou de tout dommage subi par l’appareil.Temporary Confidential
Useful Information160 For assistance, please visit http://www.panasonic.com/phonehelpFor European Union (EU)Declaration of Conformity:Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & TelecommunicationsTerminal Equipment (R&TTE) Directive 1999/5/EC.Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting:http://www.doc.panasonic.deContact:Panasonic Services Europea Division of Panasonic Marketing Europe GmbHPanasonic Testing CentreWinsbergring 15, 22525 Hamburg, GermanyImportant Safety Information:Use only the included Panasonic AC adaptor (model no.PQWEWP1050).English This 2.4 GHz Wireless LAN equipment is intended for use in the following countries in the EU: the United Kingdom, Germany, and France.French Cet équipement LAN sans fil de 2,4 GHz a été conçu pour être utilisé dans les pays suivants de l’Union Européenne: Royaume-Uni, Allemagne, et France.German Dieses Zubehör für die Einrichtung eines 2,4-GHz-Wireless LAN ist für die Verwendung in folgenden EU-Ländern vorgesehen: Großbritannien (UK), Deutschland, und Frankreich.Temporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/phonehelp 161Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product.Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point.Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.For business users in the European UnionIf you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.Information on Disposal in other Countries outside the European UnionThis symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.Temporary Confidential
Useful Information162 For assistance, please visit http://www.panasonic.com/helpSpecificationsBase unit:Router feature WAN connection mode: DHCP, PPPoE, StaticDHCP server: Yes (max. 5 clients, including 1 for handset)DNS relay (DNS Proxy): YesIP packet filtering: Yes (max. 20)UPnP: Internet Gateway Device (IGD)Address translation: IP masquerade, port forwarding (max. 10), DMZAP (Bridge) feature Connection mode: DHCP, StaticUPnP: Basic DeviceNetwork Interface feature WAN: 10Base-T/100Base-TX Ethernet RJ-45 connector x 1LAN: 10Base-T/100Base-TX Ethernet RJ-45 connector x 1Wireless: IEEE 802.11b, IEEE 802.11b/gWireless feature Transmission speed*1: IEEE 802.11b: 11/5.5/2/1 Mbps IEEE 802.11g: 54/48/36/24/18/12/9/6 MbpsData transfer mode: IEEE 802.11b: Direct Sequence Spectrum Spread (DS-SS), IEEE 802.11g: Orthogonal Frequency Division Multiplexing (OFDM)Frequency range: 2.412 – 2.462 GHz (center frequency)Number of channels: 11 channels (1–11)Security: SSID, WEP(64/128 bit), WPA-PSK (TKIP, AES), WPA2-PSK (TKIP, AES), Broadcast SSID, MAC address filteringTemporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/help 163*1 The figures shown are theoretical maximums and not the actual figures when using the product.Handset:Other feature Indicators: WAN, LAN, WIRELESS, LOCATORButtons: LOCATOR, FACTORY DEFAULT RESET, Mode selectorDimension (HWD): Approx. 33 mm x 148 mm x 51 mm (11/4 inches x 57/8 inches x 2 inches)Mass (Weight): Approx. 150 g (0.33 lb.)Power consumption: Standby: Approx. (TBD) WMaximum: Approx. (TBD) WPower output: 30 mWPower supply: AC adaptor: Input: 100–240 V AC, 50–60 HzOutput: 6 V DC, 1.5AOperating environment temperature: 0 °C – 40 °C (32 °F – 104 °F)Skype feature Calls: Skype-to-Skype callsSkypeIn callsSkypeOut callsConference calls (guest only)Call waitingSkype Voicemail: YesContacts list: Yes (max. 500)History: Incoming calls (max. 20)Outgoing calls (max. 20)Missed calls (max. 50)Voicemails (max. 100)Authorizations (max. 20)Temporary Confidential
Useful Information164 For assistance, please visit http://www.panasonic.com/help*1 The figures shown are theoretical maximums and not the actual figures when using the product.Note:LDesign and specifications are subject to change without notice.LThe illustrations in these instructions may vary slightly from the actual product.Network feature Connection mode: DHCP, StaticPreferred networks: Yes (max. 21, including 1 for base unit)Network Interface feature Wireless: IEEE 802.11b/gWireless feature Transmission speed*1: 11/5.5/2/1 Mbps Data transfer mode: Direct Sequence Spectrum Spread (DS-SS)Frequency range: 2.412 – 2.462 GHz (center frequency)Number of channels: 11 channels (1–11)Security: SSID, WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)Other feature Indicators: Charge/RingerDisplay: 1.8 inch TFT LCD, 65k colorsDimension (HWD): Approx. 142 mm x 45 mm x 20 mm (55/8 inches x 13/4 inches x 3/4 inch)Mass (Weight): Approx. 100 g (0.22 lb.)Power consumption: Standby: Approx. (TBD) WMaximum: Approx. (TBD) WPower output: 30 mWPower supply: Li-Ion battery (3.6 V, 730 mAh)Operating environment temperature: 0 °C – 40 °C (32 °F – 104 °F)Temporary Confidential
Useful InformationFor assistance, please visit http://www.panasonic.com/phonehelp 165Customer servicesCustomer Services DirectoryObtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:http://www.panasonic.com/consumersupportor, contact us via the web at: http://www.panasonic.com/contactinfoYou may also contact us directly at: 1-800-211-PANA (1-800-211-7262),Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.TTY users (hearing or speech impaired users) can call 1-877-833-8855.TTY users (hearing or speech impaired users) can call 1-866-605-1277.Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:http://www.pasc.panasonic.comor, send your request by E-mail to:npcparts@us.panasonic.comYou may also contact us directly at:1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)Panasonic Services Company20421 84th Avenue South, Kent, WA 98032(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)Accessory PurchasesService in Puerto RicoPanasonic Puerto Rico, Inc.San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985Phone (787)750-4300, Fax (787)768-2910Temporary Confidential
Index166 For assistance, please visit http://www.panasonic.com/phonehelpIndexA Answering calls: 70AP Configuration: 41Authentication: 127Auto sign in: 85B Base unitSetting: 27BatteryCharge: 45Installation: 44Level: 46Performance: 46Replacement: 44C Call forwarding: 71Call History: 68, 77Call Waiting: 75Character table: 49Conference: 75Contacts list: 68D Default network settings: 145DHCP Configuration: 38DHCP Lease Table: 107DMZ: 118DNS Server: 37, 38, 40DTMF: 76E Encryption: 127Error messages: 155H Handset registration: 93Handset Status: 109Headset, optional: 154Help: 142Hold: 75I Idle screen: 54Initialization Wizard: 29Internet connection: 36, 111IP Address: 39, 41L LAN / DHCP Server: 113Load Settings: 136LogConnection: 140Packet Filtering: 138UPnP Port Mapping: 139M MAC Address Clone: 112MAC Address Filtering: 129Main menu: 57Making calls: 68Mute: 75N Network: 83Network Connection: 97Network Status: 106P Packet Filtering: 120Password: 29, 81, 131PIN code: 89Port Forwarding: 116Power screen: 59PPPoE Configuration: 36R Reset: 87, 134Reset button: 145Ringer off: 70Routing: 124S Short cut keys: 16Skype credit: 92SkypeIn: 92SkypeOut: 63, 69Software updates: 85, 86Speakerphone: 69Static Configuration: 39Status icons: 55Status indicators: 47Subnet Mask: 39, 41Support: 141System requirements: 19T Time and Date: 60Tones: 88Top Menu: 95Troubleshooting for installation: 42TTY: 13, 154, 165U Update Firmware: 101, 132Temporary Confidential
IndexFor assistance, please visit http://www.panasonic.com/phonehelp 167UPnP: 119UPnP Port Mapping Table: 108User name: 29V Version Information: 109Voicemail: 72VolumeReceiver: 69Ringer: 70Speaker: 69W Wireless: 126Wireless Status: 108Temporary Confidential
If you need assistance with setup or operation1Visit our website: http://www.panasonic.com/phonehelp2Contact us via the web at: http://www.panasonic.com/contactinfo3Call us at: 1-800-211-PANA (1-800-211-7262)TTY users (hearing or speech impaired users) can call 1-877-833-8855.When you ship the productLCarefully pack your unit, preferably in the original carton.LAttach a letter, detailing the symptom, to the outside of the carton.LSend the unit to Panasonic Services Company Customer Servicenter, prepaid and adequately insured.LDo not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Puerto Rico, Inc.San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,Carolina, Puerto Rico 00985Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15539ZA-CD DJ1006SK0Temporary Confidential

Navigation menu