Panasonic of North America 96NKX-WP1050A Wi-Fi Phone Handset for Skype Service User Manual

Download:
Mirror Download [FCC.gov]
Document ID	706392
Application ID	8zG+gQv0Y+BZJoEM4Qvicg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	276.02kB (3450248 bits)
Date Submitted	2006-09-19 00:00:00
Date Available	2006-11-03 00:00:00
Creation Date	2006-09-15 18:33:21
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2006-09-15 18:33:21
Document Title	User manual

Temporary Confidential
Operating Instructions
Wi-Fi Phone for Skype
Executive Travel Set
Model No.
KX-WP1050
Charge the handset battery for 6 hours before initial use.
Please read these Operating Instructions before using the unit and save for
future reference.
Table of Contents
Temporary Confidential
Introduction
Feature highlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Security caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Countries permitted to use this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
For best performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Symbols and screen used in these operating instructions . . . . . . . . . . . . . . . . . . . . . . . 17
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Getting Started
Setup flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installing the base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
While you are at a hotel room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
While you are at home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting the base unit for the first time (Initialization Wizard) . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Setting up the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Base unit status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Powering on the handset (Signing in to Skype) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Handset displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Power screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Managing Contacts
Contacts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Adding contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Searching for Skype contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Contacts list options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Viewing a contact profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Blocking contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Making/Answering Calls
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Diverting calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Skype Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Useful features during a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Table of Contents
Managing History
History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Personal Skype Status and Settings
Personal Skype status and profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Personal Skype settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Handset Settings
Wi-Fi network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Services
Service information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Handset Locator
Registering the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Locating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Base Unit Settings
Setting the base unit from Top Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Network Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Updating the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Link for handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Mode selector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Setting your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Useful Information
Additional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
FCC and other information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Industry Canada (IC) and other information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Règles d’Industrie Canada et autres renseignements . . . . . . . . . . . . . . . . . . . . . . . . . 159
For European Union (EU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Customer services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Feature highlights
Thank you for purchasing a Panasonic Wi-Fi Phone for Skype Executive
Travel Set.
L Wi-Fi handset with embedded Skype*1
– Enjoy Free or Low-Cost calling
– No Fixed Monthly Charges
– Hands Free speaker phone
L Portable base unit with Wireless Router
– For Use in 6 countries
– Wireless LAN for IEEE 802.11b
*1 Skype offers subscription-based services such as Skype Voicemail, SkypeIn and
SkypeOut. For more information, visit the Skype homepage: http://www.skype.com/
How does Skype work?
Telephone
Network
Skype System
Landline
telephone
Optional Services
-SkypeIn calls
-SkypeOut calls
-Skype Voicemail
Computer
Skype-to-Skype
calls
Internet
Modem /
Router
Skype
Headset+PC (Skype installed)
phone
KX-WPA102
KX-WPA100
KX-WP1050
The KX-WP1050 Wi-Fi Phone for Skype Executive Travel Set consists of KX-WPA102
base unit with a router/wireless access point functionality and KX-WPA100 wireless
handset. It enables you to make and answer Skype-to-Skype calls with its handset
anywhere an Internet connection is available. In order to make Skype-to-Skype calls, the
handset needs to be wirelessly connected to the base unit which provides an access to the
Internet. You also need to sign in to Skype with your Skype account to make Skype-to-
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Skype calls. You can create your Skype account with the handset, or use your existing
Skype account from the PC version of Skype.
What is Skype?
With Skype, you can make free calls over the Internet to any Skype users all over the
world.
The Skype program is already installed in the KX-WPA100 handset so that you can start
using it easily.
Skype also offers additional features, including:
SkypeOut
SkypeOut allows you to place calls to traditional landline and
mobile phones.
SkypeIn
SkypeIn is a subscription feature that provides you with a
traditional phone number for receiving Skype calls on your
handset from traditional landlines and mobile phones.
Skype Voicemail
Skype Voicemail allows you to send and receive Voicemail
messages and record a greeting.
All of these features are available at http://www.skype.com/
No emergency calls (No 911 service): Skype is not a replacement for your ordinary
telephone and cannot be used for emergency calling.
L For information about Skype, please visit the Skype homepage:
http://www.skype.com/
L Specifications are subject to change without notice.
Trademarks
L Microsoft®, Windows® and Microsoft Internet Explorer® are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
L UPnP™ is a trademark of the UPnP™ Implementers Corporation.
L Skype, SkypeIn, SkypeOut and the S logo are trademarks of Skype Limited.
L Wi-Fi is a trademark of the Wi-Fi Alliance.
L Mozilla® and Firefox® are trademarks of the Mozila Foundation.
L All other trademarks identified herein are the property of their respective owners.
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Important safety instructions
When using the product, basic safety precautions should always be followed to reduce the
risk of fire, electric shock, or personal injury.
1. Read all instructions carefully.
2. Follow all warnings and instructions marked on the product.
3. Unplug the product from power outlets before cleaning. Do not use liquid or aerosol
cleaners. Use a moist cloth for cleaning.
4. Do not use the product near water, for example near a bathtub, wash bowl, kitchen
sink, etc.
5. Place the product securely on a stable surface. Serious damage and/or injury may
result if the product falls.
6. Do not cover slots and openings on the product. They are provided for ventilation and
protection against overheating. Never place the product near radiators, or in a place
where proper ventilation is not provided.
7. Use only the power source marked on the product. If you are not sure of the type of
power supplied to your home, consult your dealer or local power company.
8. Do not place objects on the power cord. Install the product where no one can step or
trip on the cord.
9. Do not overload power outlets and extension cords. This can result in the risk of fire or
electric shock.
10. Never push any objects through slots in the product. This may result in the risk of fire
or electric shock. Never spill any liquid on the product.
11. To reduce the risk of electric shock, do not disassemble the product. Take the product
to an authorized service center when service is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can cause
electric shock when the product is subsequently used.
12. Unplug the product from power outlets and take to an authorized service center when
the following conditions occur:
A. When the power cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not work normally by following the operating instructions. Adjust
only controls covered by the operating instructions. Improper adjustment may
require extensive work by an authorized service center.
E. If the product has been dropped or physically damaged.
F. If the product exhibits a distinct change in performance.
13. Do not touch the units, the AC adaptor cord and AC cord, or CHARGE cable during
lightning storms.
14. Do not use the product to report a gas leak, when in the vicinity of the leak.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Introduction
15. Do not use the units on airplanes, in hospitals, or in other locations where wireless LAN
signals may affect the operation of devices in the vicinity.
L Abide by instructions regarding use in airplanes and hospitals.
SAVE THESE INSTRUCTIONS
CAUTION:
Installation
L Do not touch the plug with wet hands.
L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is
installed near the product and is easily accessible.
Battery
To reduce the risk of fire or injury to persons, read and follow these instructions.
L Use only the battery(ies) specified.
L Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste
management codes for special disposal instructions.
L Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
L Exercise care when handling the battery(ies). Do not allow conductive materials such as
rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the
battery(ies) and/or the conductive material to overheat and cause burns.
L Charge the battery(ies) provided, or identified for use with the product only, in
accordance with the instructions and limitations specified in this manual.
WARNING:
L To prevent the risk of fire or electrical shock, do not expose the product to rain or any
type of moisture.
L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke
has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800211-7262).
Medical:
L Consult the manufacturer of any personal medical devices, such as pacemakers or
hearing aids, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The product operates in the frequency range of 2.412 GHz to 2.462
GHz, and the power output is 15 dBm (max.).) Do not use the product in health care
facilities if any regulations posted in the area instruct you not to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF
energy.
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Security caution
When using this product, take appropriate measures to avoid the following security
breaches.
L Leaks of private information via this product
L Illegal use of this product by a third party
L Interference or suspension of the use of this product by a third party
Take the following measures to avoid security breaches:
L To prevent illegal access, keep the update firmware (If you do not have the latest version
of firmware, this can lead to blocked access or information leaks).
L When downloading data from the Internet, ensure that viruses or illegal programs are
not inadvertently downloaded.
L You are responsible for the security settings, such as user name and password, to
access this product. This information should not be made available to any third parties
outside the user group.
L Place this product where it is unlikely to be stolen.
L You are responsible for this product’s user information, such as Contacts list, Internet
settings etc. This information should not be made available to any third parties outside
the user group.
L When sending this product to be repaired with a company not related to Panasonic,
make a back-up file of the base unit settings, if necessary, and reset this product to
factory default.
L When transferring this product to another party, make a back-up file of the base unit
settings, if necessary, and reset this product to factory default.
L When disposing of this product, reset this product to factory default, or erase information
by means of electrical deletion or physical dismantlement.
User Name and Password Protection
The use of a unique User Name and secret Password is an important tool that will help
limit unauthorized individuals from accessing the base unit. If you choose to disable this
tool, and choose not to limit access by use of a User Name and Password, this may result
in access to the base unit by unauthorized individuals. See “Password” in “Maintenance”
section on page 131.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Introduction
Countries permitted to use this product
IMPORTANT:
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic units use radio waves to communicate with
each other.
For maximum distance and noise-free operation, we recommend the following:
L Placing the product away from electrical appliances.
L Placing the base unit in a HIGH and CENTRAL location with no obstructions such as
walls.
L If you use the handset or base unit near a microwave oven which is being used, noise
may be heard. Move away from the microwave oven and bring the handset closer to the
base unit.
L If you use the handset or base unit near another cordless phone’s base unit, noise may
be heard. Move away from the other cordless phone’s base unit and bring the handset
closer to your base unit.
Environment
L Keep the product away from electrical noise generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from excessive smoke, dust, high temperature, and
vibration.
L The product should not be exposed to direct sunlight.
L Do not place heavy objects on top of the product.
L When you leave the product unused for a long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp basements should also be avoided.
L The maximum calling distance may be shortened when the product is used in the
following places: Near obstacles such as hills, tunnels, underground, near metal objects
such as wire fences, etc.
L Operating the product near 2.4 GHz electrical appliances may cause interference. Move
away from the electrical appliances.
Routine care
L Wipe the outer surface of the product with a soft moist cloth. Do not use benzine,
thinner, or any abrasive powder.
10
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Accessory information
Included accessories
No. Accessory item
Order number
Quantity
AC adaptor for base unit
PQWEWP1050
AC cord*1
PQJA10188Z
Battery
CGA-P001
Handset cover*2
PQYNWPA100R
Handset stand
PQKE10465Z
CHARGE cable
PQJA10184Z
Ethernet cable
PQJA10185Z
CD-ROM*3
PQQX15539Z
Carrying case
PQQD10002Z
WLAN sticker*4
PQQT23321Z
*1 You might need a separate AC cord when you use this product in other countries. See
page 13 for details.
The included AC cord is compatible with a power source up to 125 V AC.
*2 The handset cover comes attached to the handset.
*3 Operating Instructions are included.
*4 The sticker lists the factory default wireless settings for the base unit. Please attach the
sticker on the back cover of the Quick Start Guide, and store it in a safe place.
For assistance, please visit http://www.panasonic.com/phonehelp
11
Introduction
Temporary Confidential
Note:
L All the accessory items except the CD-ROM are included in the carrying case.
Packing the accessories
Ethernet cable
CHARGE cable
AC cord
AC adaptor
Base unit
Battery
Handset
stand
Quick Start Guide
Handset
Carrying case
Note:
L When packing the accessories in the carrying case, do not put the CD-ROM in the case.
12
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Additional/replacement accessories
Accessory item
Order number
AC cord
PSJA1106Z (for UK)
PFJA02A006Z (for EU)
Rechargeable lithium-ion (Li-ion) battery
CGA-P001
Headset
KX-TCA88HA
KX-TCA86
KX-TCA91
KX-TCA92
KX-TCA93
KX-TCA94
KX-TCA95
Changing the AC cord while traveling:
Carry the AC cord designed for use in your destination countries when you travel. See
page 9 for information about countries permitted to use this accessory along with the main
kit.
(For UK)
(For EU)
Sales and support information
L To order additional/replacement accessories, call 1-800-332-5368.
L TTY users (hearing or speech impaired users) can call 1-866-605-1277.
For assistance, please visit http://www.panasonic.com/phonehelp
13
Introduction
Temporary Confidential
Controls
Base unit
Front view
Rear view
Mode selector
14
LOCATOR indicator
WIRELESS indicator
LAN (Ethernet) indicator
WAN (Internet) indicator
LOCATOR button
CHARGE port
Power port
WAN (Internet) port
LAN (Ethernet) port
Mode selector (page 144)
FACTORY DEFAULT RESET button
(page 145)
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Handset
Options
Select
Back
K L M N
Speaker
Headset jack
{{} (SEND)
{s} (SP-PHONE)
{*}
CHARGE port
Microphone
Charge/Ringer indicator
Receiver
Display
Left soft key
Navigator key ({^} {V} {<} {>})
Middle soft key: Press the center of
the navigator key.
Right soft key
{}} (END)
{MUTE} / {CLEAR}
{CONTACTS}
{#}
For assistance, please visit http://www.panasonic.com/phonehelp
15
Introduction
Temporary Confidential
Short cut keys:
You can access the useful features by using the short cut keys.
While in Idle mode, press the desired short cut key.
L To display Idle screen, see “Powering on the handset (Signing in to Skype)” on page 51.
Key
Displayed function
name
Description
Right soft key
{Connect}/{Sign in}
Connects to network or signs in to Skype.
Left soft key
{Options}
Accesses Power screen menu (page 59).
{{}
–
Accesses Outgoing calls list. {<} or {>}
to switch to Incoming calls list or Missed
calls list.
{CONTACTS}
–
Accesses Contacts list.
Keypad lock:
While in Idle mode, press and hold {Menu} (middle soft key) to lock the keypad. To
release the lock, press and hold Middle soft key again.
L During the keypad lock, “ ” icon is displayed on the handset display.
16
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
Symbols and screen shots used in these operating
instructions
Symbols used for operations
Handset:
Symbol
Meaning
The words in the brackets indicate unit button
names/soft key names on the handset.
Example:
– Unit buttons: {{}, {CONTACTS}
– Soft keys: {Options}, {Menu}
“
”
The words in quotations indicate menus displayed
on the handset screen.
Example:
“Add contact”
Proceed to the next operation.


{Menu} (middle soft key)
While in Idle mode, press {Menu} (middle soft
key).
“Settings” i {Select}
Press {^} or {V} to select “Settings”, then
press {Select} (middle soft key).
Select the desired setting.
Press {^} or {V} to select the desired setting.
Computer:
Symbol
Meaning
[ ]
The words in the brackets indicate button names
and hyperlinks displayed on the computer screen.
Example:
[Next>], [OK]
For assistance, please visit http://www.panasonic.com/phonehelp
17
Introduction
Temporary Confidential
Screen shots used for operations
L Microsoft product screen shots reprinted with permission from Microsoft Corporation.
L The screen shots in these instructions are Microsoft Windows XP and are included for
reference only.
L The screen shots in these instructions may differ slightly from the screen shown on your
computer.
18
For assistance, please visit http://www.panasonic.com/phonehelp
Introduction
Temporary Confidential
System requirements
Your computer and network must meet the following technical specifications for the unit to
work properly.
For your PC
Item
Description
Operating system
Microsoft Windows XP
Microsoft Windows 2000
Interface
Ethernet network device installed or IEEE 802.11 b/g
wireless network device installed.
Web browser
Microsoft Internet Explorer 6.0 or higher for Windows
Mozilla Firefox 1.5 or higher for Windows
For Base unit
Item
Description
Internet connection
10/100 Mbps Ethernet connection port device which
provides access to Internet, such as Cable or DSL modem
(USB-only modems are not supported.)
For Handset
Item
Description
Internet connection
Base unit or IEEE 802.11b wireless access point which
provides access to Internet.
For assistance, please visit http://www.panasonic.com/phonehelp
19
Getting Started
Temporary Confidential
Setup flow
Follow the procedures below to start using the unit.
Installing the base unit
Select the appropriate setup procedure according to where and
how you use the unit.
L While you are at a hotel room
page 22
L While you are at home
– AP (Bridge) mode
– Router mode
page 24
page 25
Setting up the base unit for the first time (Initialization
Wizard)
page 27
Setting up the handset
page 44
Powering on the handset (Signing in to Skype)
page 51
20
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Installing the base unit
You need to install the base unit before using this product. The installation methods differ
depending on whether you are at a hotel room or at home.
L Hotel: See the instructions “While you are at a hotel room” on page 22.
L Home: See the instructions “While you are at home” on page 23.
Note:
L The AC adaptor and base unit may become warm during use; however this is not a sign
of malfunction.
L You can also connect your computer to the base unit wirelessly instead of using the
Ethernet cable. To establish a wireless connection between your computer and the base
unit, you need to enter the same SSID into the computer as that of KX-WPA102 (The
SSID is displayed on the included WLAN sticker). See “Using your computer on a
wireless LAN” on page 153 for details.
L You need to use only the included Panasonic AC adaptor PQWEWP1050 and AC cord
PQJA10188Z.
L Leave the AC adaptor cord plugged in to the AC outlet the whole time.
L The unit will not work during a power failure.
For assistance, please visit http://www.panasonic.com/phonehelp
21
Getting Started
Temporary Confidential
While you are at a hotel room
You can use the handset while you are away by accessing the Internet at a hotel room.
The hotel you are staying in may give you specific instructions as to what Internet
connection type you should select. In that case, follow their instructions. Otherwise, you
are suggested to select [DHCP] mode when you set Internet Connection Type in
Initialization Wizard (page 27).
Mode selector
WAN indicator
Base unit
Computer
AC cord
To AC outlet
(120 V AC, 60 Hz)
To LAN port
Ethernet cable
(not included)
AC adaptor
To WAN port
Internet
Ethernet cable
(included)
To Ethernet port
(RJ45 jack)
Switch the Mode selector to “HOTEL”.
Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet
(LAN) port on your computer.
22
Make sure the base unit is left unplugged. Connect the included Ethernet cable to the
“WAN” port on the base unit and the Ethernet port (RJ45 jack) in the hotel room.
For assistance, please visit http://www.panasonic.com/phonehelp
4
Temporary Confidential
Getting Started
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Note:
L In step 2, you can connect the base unit to a wireless bridge device in a hotel room if
available. Ask the hotel front desk for details.
While you are at home
The base unit has 2 modes of operation while used at home: AP (Bridge) mode and
Router mode.
AP (Bridge) mode:
Designed for the case when you have a router or modem (DSL or cable) with a built-in
router.
L Refer to the instructions on page 24.
Router mode:
Designed for the case when you have a standard DSL or cable modem only.
L Refer to the instructions on page 25.
Note:
L If your modem has more than one port, then you have a modem with a built-in router.
L If you have more than one computer connected to the Internet, then you have a router.
L If you do not know which type your modem is, ask your Internet service provider.
For assistance, please visit http://www.panasonic.com/phonehelp
23
Getting Started
Temporary Confidential
AP (Bridge) mode - With an EXISTING ROUTER or MODEM with a
built-in ROUTER
If you install the base unit with your existing router or modem with a built-in router, the base
unit operates in AP (Bridge) mode. Select [AP (Bridge)] mode for your Internet
connection type in Initialization Wizard (page 27). In AP (Bridge) mode, the base unit
connects wireless devices to one another and to the LAN, and allows wireless devices to
use DHCP server on the LAN.
Mode selector
WAN indicator
Base unit
Computer
To LAN port
AC cord
To AC outlet
(120 V AC, 60 Hz)
AC adaptor
Ethernet cable (not included)
Cable or
Existing
router
DSL modem
To WAN port
Ethernet cable (included)
Internet
Switch the Mode selector to “HOME”.
Make sure the base unit is left unplugged. Connect the included Ethernet cable to the
“WAN” port on the base unit and an unused Ethernet (LAN) port on your existing router
or modem with a built-in router.
24
Turn off your computer properly. Unplug any cable connecting your existing router (or
modem with a built-in router) to your computer. However, your existing router (or
modem with a built-in router) needs to remain connected to your cable or DSL modem.
For assistance, please visit http://www.panasonic.com/phonehelp
4
Getting Started
Temporary Confidential
Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
the router from in step 2).
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Router mode - With a MODEM only
If you install the base unit with a modem only, the base unit operates in Router mode. In
Router mode, the base unit assigns IP addresses to wireless devices as a DHCP server.
It also protects the wireless devices from directly exposing to the LAN. For your Internet
connection type, select [DHCP], [Static] or [PPPoE] in Initialization Wizard (page 27).
Mode selector
WAN indicator
Base unit
Computer
To LAN port
AC cord
To AC outlet
(120 V AC, 60 Hz)
Ethernet cable
(not included)
AC adaptor
Internet
2, 5
To WAN port
Ethernet cable
(included)
Cable or DSL modem
Switch the Mode selector to “HOME”.
Turn off your computer properly. Unplug your cable or DSL modem’s power cord and
leave the modem turned off for at least 10 minutes to clear its memory. Unplug any
For assistance, please visit http://www.panasonic.com/phonehelp
25
Getting Started
Temporary Confidential
cable connecting the modem to your computer. However, the modem needs to remain
connected to the Internet.
Connect the included Ethernet cable to the “WAN” port on the base unit and an
Ethernet (LAN) port on the modem.
Connect the existing Ethernet cable to the “LAN” port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
your modem from in step 2).
Plug your modem’s power adaptor into an AC outlet.
L Wait for your modem’s power light to stop flashing before you go to the next step. (It
may take a few minutes.)
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Checking for Internet access:
Turn on your computer and open the Web browser to check for Internet access. If you
cannot access the Internet, go through the following.
L For Cable modem users: Turn off the modem for 10 minutes to erase the old
information in the modem. If this still does not work, you may need to register the base
unit with your Internet service provider. Provide them with the WAN MAC registration
number found on the bottom of the base unit.
L For DSL modem users: You may need to set the PPPoE configuration for your Internet
connection type in Initialization Wizard (page 27). Do not unplug the power of the base
unit during the setting. If unplugged, it may take a few minutes or more to reset the
PPPoE connection.
26
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Setting the base unit for the first time (Initialization
Wizard)
You can log in the base unit and configure the unit’s settings using a Web browser on your
computer connected to the “LAN” port on the base unit.
Important:
L Recommended Web browser:
Microsoft Internet Explorer 6.0 or higher for Windows
Mozilla Firefox 1.5 or higher for Windows
L Make sure the base unit and handset are not being used.
L Change the appropriate setting for your network configuration.
If you access the base unit for the first time or after resetting the network settings (page
134, 145), you must set the user name and password first in Initialization Wizard so that
you can access the base unit using them. After that, you need to configure the network
settings you use for HOME and HOTEL modes.
For example, if you register AP (Bridge) setting for HOME mode and DHCP setting for
HOTEL mode, you can connect to the Internet in AP (Bridge) or DHCP mode just by
switching the Mode selector (page 144) to HOME or HOTEL from the next time.
For assistance, please visit http://www.panasonic.com/phonehelp
27
Getting Started
Temporary Confidential
Initialization Wizard flow
Follow the procedures below to set the base unit for Internet connection.
Login User Name and Password (Step 1)
page 29
Set your user name and password to log in the base unit.
Internet Connection Setting for Home Mode (Step 2)
page 30
Name the profile of the Internet connection setting for HOME mode.
Internet Connection Type
page 31
Select the Internet connection type used for the HOME mode profile.
(Types available: PPPoE/DHCP/Static/AP (Bridge))
(Internet Connection Type) Configuration
page 36
Configure the Internet connection type selected for the HOME mode
profile.
Internet Connection Setting for Hotel Mode (Step 3)
page 33
Name the profile of the Internet connection setting for HOTEL mode.
Internet Connection Type
page 34
Select the Internet connection type used for the HOTEL mode profile.
(Types available: PPPoE/DHCP/Static)
(Internet Connection Type) Configuration
page 36
Configure the Internet connection type selected for the HOTEL mode
profile.
Save Settings
page 35
Confirm the settings you have configured in Initialization Wizard, and
save.
If you check [Skip by setting] in stage 2, you can skip to stage 5 without configuring the
Internet connection settings for the HOME mode profile. If you check [Skip by setting] in
stage 5, you can skip to stage 8 without configuring the Internet connection settings for the
HOTEL mode profile.
28
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Initialization Wizard
Open your Web browser on your computer connected to the “LAN” port on the base
unit.
Enter http://192.168.0.242/ (the KX-WPA102’s default IP address) or http://kxwpa.webpage in the address field of your browser and press ENTER key. You can
also double click the KX-WPA102 icon in My Network Places in Start menu when using
Windows XP and UPnP is enabled. See “Setting UPnP to display the shortcut” on page
153 for details.
L Initialization Wizard starts. A screen with fields for your user name and password
(Login User Name and Password page) is displayed.
If “Initialization Wizard” window is not displayed:
L Check the setting of Local Area Connection of your computer. It is necessary to
obtain an IP address of your computer automatically from a DHCP server (page 147).
L Sometimes it is necessary to set up your Web browser’s proxy server to access the
KX-WPA102 base unit (page 151).
For assistance, please visit http://www.panasonic.com/phonehelp
29
Getting Started
Temporary Confidential
Enter the desired user name and password, then click [Next>].
Important:
L Please keep your user name and password securely.
Setting
[User Name]
[Password]
[Retype
Password]
Description
L The user name and password can contain 6 to 15 characters
(including numbers).
L The following cannot be used: [ “ ], [ ‘ ], [&], [<], [>], [(space)]
L User name and password must be different from each other.
L User name and password are case-sensitive.
L Enter the password again.
L The Internet Connection Setting for Home Mode page is displayed.
30
For assistance, please visit http://www.panasonic.com/phonehelp
4
Getting Started
Temporary Confidential
Enter the desired profile name for the profile No. you select, then click [Next>].
L If you wish to use the default Internet connection setting (DHCP), check [Skip by
setting].
Setting
[Profile Name]
[Profile No.]
Description
L The profile name can contain 1 to 20 characters (including
numbers). When different network connection settings are
created for different network environments, a profile name
should be given to each setting to distinguish one from
another. Name the setting, for example, “Hotel”, “Home” or
“Office”.
L Select the number for the profile name.
L The Internet Connection Type page is displayed.
Note:
L If you check [Skip by setting], the page will not be displayed.
For assistance, please visit http://www.panasonic.com/phonehelp
31
Getting Started
Temporary Confidential
Select the desired connection type used in HOME mode, then click [Next>].
L Internet connection modes vary according to the Internet service provider. Select a
connection mode referring to the Internet service provider’s setup information.
L Select [PPPoE], [DHCP] or [Static] if the base unit is installed in Router mode.
Select [AP (Bridge)] if the base unit is installed in AP (Bridge) mode.
Setting
[PPPoE]
[DHCP]
[Static]
[AP (Bridge)]
Description
L This connection mode is usually required for use with DSL
modems.
L Allows the base unit to receive an IP address automatically
from a DHCP server. This connection mode is usually
required for use with cable modems.
L Allows the base unit to assign a specific IP address.
L Allows the base unit to work as an access point when you
have a router at home. ([AP (Bridge)] is not available in
HOTEL mode.)
L A screen with fields for configuring the connection type you select in this step is
displayed. See “Configuring the Internet connection settings” on page 36.
32
For assistance, please visit http://www.panasonic.com/phonehelp
6
Temporary Confidential
Getting Started
Configure the settings, then click [Next>].
L The Internet Connection Setting for Hotel Mode page is displayed.
For assistance, please visit http://www.panasonic.com/phonehelp
33
Getting Started
Temporary Confidential
Enter the desired profile name for the profile No. you select, then click [Next>].
L If you wish to use the default Internet connection setting (DHCP), check [Skip by
setting].
L See step 4 on page 31 for details.
L The Internet Connection Type page is displayed.
Note:
L If you check [Skip by setting], the Internet Connection Type page will not be
displayed.
Select the desired connection type used in HOTEL mode, then click [Next>].
Setting
[PPPoE]
[DHCP]
[Static]
Description
L This connection mode is usually required for use with DSL
modems.
L Allows the base unit to receive an IP address automatically
from a DHCP server. This connection mode is usually
required for use with cable modems.
L Allows the base unit to assign a specific IP address.
L [DHCP] mode (default setting for hotel Internet connection type) is often used in hotel
rooms.
34
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
L A screen with fields for configuring the connection type you select in this step is
displayed. See “Configuring the Internet connection settings” on page 36.
Configure the settings, then click [Next>].
L The Save Settings page is displayed.
10 Confirm the settings you are about to save, then click [Save].
LThe base unit begins restarting.
Note:
L You can change the user name and password after logging in to the base unit (page
131).
L Once you have configured the settings in Initialization Wizard, you can connect to the
Internet in the connection mode that is registered as HOME or HOTEL mode just by
switching the Mode selector (page 144) to HOME or HOTEL from the next time.
For assistance, please visit http://www.panasonic.com/phonehelp
35
Getting Started
Temporary Confidential
Configuring the Internet connection settings
Configure the Internet connection mode you select in the Internet Connection Type page
of Initialization Wizard (in step 6 of page 33 for HOME mode; step 9 of page 35 for HOTEL
mode).
L If your Internet service provider or network administrator does not specify any of the
settings, leave the data fields blank.
PPPoE Configuration: (Point to Point Protocol over Ethernet) This connection mode is
usually required for use with DSL modems.
36
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Setting
[User Name]
[Password]
[Service Name]
[DNS Server 1]
[DNS Server 2]
[Domain Name]
[MTU]
Getting Started
Description
L Enter your User Name (1 – 63 characters) provided by your
Internet service provider in this data field.
L Enter your Password (1 – 63 characters) provided by your
Internet service provider in this data field.
L Enter your Service Name (1 – 63 alphanumeric characters)
provided by your Internet service provider in this data field if
required.
L If you have the DNS (Domain Name System) server
addresses assigned by your Internet service provider or
network administrator, enter them in this data field. They
usually have two addresses.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L Enter your Domain Name provided by your Internet service
provider in this data field if required.
L Enter the maximum size of packet that can be sent.
For assistance, please visit http://www.panasonic.com/phonehelp
37
Getting Started
Temporary Confidential
DHCP Configuration: Allows the base unit to receive an IP address automatically from a
DHCP server. This connection mode is usually required for use with cable modems.
DHCP configuration is often used in hotel rooms. Ask the hotel front desk for details.
Setting
[DNS Server 1]
[DNS Server 2]
[Host Name]
[Domain Name]
[MTU]
38
Description
L If you have the DNS (Domain Name System) server
addresses assigned by your Internet service provider or
network administrator, enter them in this data field. They
usually have two addresses.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L Enter your Host Name (1 – 31 characters) provided by your
Internet service provider in this data field if required.
L Enter your Domain Name provided by your Internet service
provider in this data field if required.
L Enter the maximum size of packet that can be sent.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Static Configuration: Allows the base unit to assign a specific IP address.
Setting
[IP Address]
[Subnet Mask]
[Default Gateway]
Description
L If your Internet service provider specifies the IP address and
subnet mask, enter them in each data field.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L If you have the Default Gateway address assigned by your
Internet service provider or network administrator, enter it in
this data field.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
For assistance, please visit http://www.panasonic.com/phonehelp
39
Getting Started
Temporary Confidential
Setting
[DNS Server 1]
[DNS Server 2]
[Domain Name]
[MTU]
40
Description
L If you have the DNS (Domain Name System) server
addresses assigned by your Internet service provider or
network administrator, enter them in this data field. They
usually have two addresses.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L Enter your Domain Name provided by your Internet service
provider in this data field if required.
L Enter the maximum size of packet that can be sent.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
AP Configuration: This configuration needs to be made if you have a router at home and
use the base unit as an access point. (AP Configuration is not available in the HOTEL
mode.)
Setting
[Connection Mode]
[IP Address]
[Subnet Mask]
[Default Gateway]
Description
L Select AP-DHCP for Connection Mode if the DHCP server is
operating in the router or modem with a built-in router you
are using. Select AP-Static if you want to assign Static IP
address.
L Set the IP address and subnet mask corresponding to your
local network.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L Set the default gateway address corresponding to your local
network by entering the IP address of your existing router or
modem with a built-in router, for example.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
For assistance, please visit http://www.panasonic.com/phonehelp
41
Getting Started
Temporary Confidential
Troubleshooting for installation
If problems occur while installing the base unit, you can refer to the check list below.
Up-to-date support information can be found on the xxxxx site (http://
XXXXXXXXXXXXXXXXX). Please refer to it, along with this guide, when troubleshooting.
Connection:
Problem
Solution
The modem is connected
but the WAN indicator is
off.
L Check that the modem and this product are connected.
L Check that the power of the modem and this product
are turned on.
The Ethernet is
connected but the LAN
indicator is off.
L Check the connection of the computer.
L Check that the power of the computer is turned on.
L Check that the LAN card and driver are installed on the
computer.
Internet access:
Problem
Solution
Cannot connect to the
Internet.
L Check the connection of the modem. Also check the
connection between this product and the LAN.
L Check the information received from the Internet
service provider regarding Internet connection.
L When instructed to do so by the Internet service
provider, set the web browser proxy server (page 151).
L If the power is cut when connected to the Internet using
PPPoE, it may take a few minutes or more to reconnect
to the Internet.
L Check that the power supply was turned on in the
following order: modem, router, base unit, computer.
When turning off the power supply, do so in the
following order: modem, base unit, router (if you have
one), computer.
42
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
Temporary Confidential
Initialization Wizard:
Problem
Solution
Initialization Wizard is not
displayed.
L Dialog boxes may not be displayed immediately due to
the state of the LAN.
L Check that LAN or WIRELESS indicator lights in green.
Also, check if the LAN card or wireless LAN card is on.
If not, check that the LAN is connected.
L Check that the power supply was turned on in the
following order: modem, router, base unit, computer.
When turning off the power supply, do so in the
following order: modem, base unit, router (if you have
one), computer.
For assistance, please visit http://www.panasonic.com/phonehelp
43
Getting Started
Temporary Confidential
Setting up the handset
Battery installation/replacement
Press the notch of the handset cover firmly, and slide it in the direction of the arrow.
L For replacement, remove the old battery.
Insert the battery (A), and press it down until it snaps into position (B). Then close the
handset cover (C, D).
Important:
L Use only the rechargeable Panasonic battery noted on page 13.
Attention:
Li-ion
A lithium-ion battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this
battery.
44
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
Temporary Confidential
Battery charge
Connect the included CHARGE cable to the CHARGE port of the handset. Connect the
other end to the CHARGE port of the base unit that is connected to the power supply.
Charge the battery for 6 hours before initial use.
L While charging, the charge indicator on the handset lights in red. When the battery is
fully charged, the indicator goes out.
L You can use the included handset stand while charging the battery. To use the stand,
align the grooves of the handset with the tabs of the stand and insert.
Charge indicator
To AC outlet
CHARGE ports
(120 V AC, 60 Hz)
CHARGE cable
Handset stand
Note:
L If you want to use the handset immediately, charge the battery for at least 15 minutes.
For assistance, please visit http://www.panasonic.com/phonehelp
45
Getting Started
Temporary Confidential
Battery level
Battery icon
Battery level
Fully charged
Medium
Low
Flashing: needs to be recharged.
Charging
Note:
L When the battery needs to be charged, the handset beeps intermittently during use.
Panasonic battery performance
Operation
Operating time
While in use (talking)
Up to 3 hours
While not in use (idle)
Up to 72 hours
Note:
L Battery operating time may be shortened over time depending on usage conditions and
surrounding temperature.
L Battery operating time may be shortened when you connect to a different access point,
or after you change some settings in the handset.
L The battery level may not be displayed correctly after you replace the battery. In this
case, let the battery charge for 6 hours.
46
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
Temporary Confidential
Base unit status indicators
On different occasions you may notice that the
status indicators on the base unit are flashing. You
may find the following flash patterns helpful to you:
Status indicators
Indicator
type
Indicator
color
Indicator
pattern
Status
LOCATOR
Green
On
The base unit is locating the handset.
Flashing
The base unit is registering the handset.
On
The base unit is connected to the wireless
LAN.
Flashing
A wireless data transfer is in progress.
On
A connection to LAN has been established.
Flashing
A data transfer is in progress on the LAN
side.
WIRELESS
LAN
Green
Green
For assistance, please visit http://www.panasonic.com/phonehelp
47
Getting Started
Temporary Confidential
Indicator
type
Indicator
color
Indicator
pattern
WAN
Green
On
An Internet connection has been
established (IP address obtained).
Flashing
A data transfer is in progress on the WAN
side.
Red
Flashing
The base unit hardware may be defective.
L Visit
http://www.panasonic.com/phonehelp
Amber
On
An Internet connection has yet to be
established (No IP address obtained).
Flashing
The base unit firmware may be defective
and requires a firmware update.
L See “Setting the static IP address on
your computer” on page 148 for details.
Alternately
flashing
The IP addresses on the LAN and WAN
sides overlap.
L The network configuration of the LAN
side will be temporarily changed to avoid
the overlap of the LAN and WAN
networks. During this time, Port
Forwarding, DMZ, Packet Filtering and
Static Routing functions are disabled. To
activate those functions, change the LAN
network configuration.
–
The Ethernet cable is not connected to the
Internet (WAN) port on the rear of the base
unit. Connect it.
Green/
Amber
Off
48
Status
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
Temporary Confidential
Text entry
When you enter characters or numbers, use the character and symbol tables for
reference.
Character table
Press {0} – {9}, {*} or {#}. i {OK}
Key Character
{1}
{2}
a b c A B C 2
{3}
d e f
D E F 3
{4}
g h i
G H I
{5}
J K L 5
{6}
m n o M N O 6
{7}
p q r
{8}
{9}
w x y z W X Y Z 9
{0}
Space
k l
s P Q R S 7
u v T U V 8
0 + (press and hold)
{*} Input mode change *
{#} Linefeed #
Note:
L To enter another character that is located on the same dial key, first press {>} to move
the cursor to the next space.
L To change the input mode, press {*} to shift through Lower case (abc), Upper case
(ABC), Numeric (123) and Hexadecimal (HEX) modes (Pressing {*} to change the
input mode is invalid when you enter telephone numbers.).
L The characters assigned to each key differ depending on the data entry mode.
For assistance, please visit http://www.panasonic.com/phonehelp
49
Getting Started
Temporary Confidential
Symbol table
Press {Symbol} while in the data entry screen.
Press {^}, {V}, {<} or {>} to select the desired symbol. i {Insert}
Note:
L The available symbols differ depending on the data entry mode.
Editing/correcting a mistake
Press {<} or {>} to move the cursor to the character or number you want to erase, then
press {CLEAR}. Enter the appropriate character or number.
Note:
L Press and hold {CLEAR} to erase all characters or numbers when the cursor is
positioned after the last character or number.
L Press and hold {CLEAR} to erase all characters or numbers after the cursor if the
cursor is in the middle of the text.
50
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Powering on the handset (Signing in to Skype)
To use the handset, you need to connect to a network and sign in to Skype.
Starting up for the first time
Press and hold {}} for 2 seconds to power on the handset.
Select the desired network if the network list is displayed.
i {Connect}
After a network connection is complete, select “Sign in to
Skype” if you already have a Skype account. i {Select}
L To create a new account, see “Creating a new account” on page 53.
Enter your Skype name. i {OK}
Read and accept the Skype’s agreement. i {Yes}
L The handset starts searching for available networks within
the area.
Enter your password. i {OK}
Press {Yes} or {No} to decide whether to sign in automatically from the next time on.
L Idle screen appears (page 54).
Note:
L You can also follow these instructions when you start up the handset after you reset the
handset.
L In step 3, you can connect to specific networks that require you to select security type
and enter the network key.
L In step 3, you can also connect to open networks. When connecting to open networks,
the display appears to confirm whether you want to connect or not.
L For text entry, see page 49 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
51
Getting Started
Temporary Confidential
Starting up from the second time
Press and hold {}} for 2 seconds to power on the handset.
After a network connection is complete, select “Sign in to Skype”. i {Select}
L To create a new account, see “Creating a new account” on page 53.
L If the handset is set to “Auto sign in” (page 85), Idle screen appears instead of
the “Sign in” screen, and steps 4-6 are skipped.
Enter your Skype name. i {OK}
Enter your PIN code if prompted.
L The handset starts searching for available networks. If any networks you normally
use are already in your Preferred networks list (page 84), the handset automatically
connects to one of the networks in the list.
Enter your password. i {OK}
Press {Yes} or {No} to decide whether to sign in automatically from the next time on.
L Idle screen appears (page 54).
Note:
L For text entry, see page 49 for details.
To power off the handset
Press and hold {}} for 2 seconds.
52
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Creating a new account
If you do not have your Skype account, or want to create another account, select “New
account” in step 4 in “Starting up for the first time” (page 51) or step 3 in “Starting up from
the second time” (page 52) to create a new account.
“New account” i {Select}
Enter a Skype name. i {OK}
Enter a password. i {OK}
Repeat the password. i {OK}
Read and accept the Skype’s agreement. i {Yes}
L Idle screen appears.
Note:
L For text entry, see page 49 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
53
Getting Started
Temporary Confidential
Handset displays
Idle screen
Handset status icons
Skype status
Current time
Skype credit balance
Soft key functions
Handset status icons
Icon
Meaning
Within range of the wireless LAN
Handset has no link to the wireless LAN.
Battery level
Battery is charging.
Speakerphone is on.
54
*1
A newly missed call has been listed in History.
*1
A newly received Voicemail has not yet been heard.
*1
A newly received Authorization request is on the pending authorization
request list in History.
*1
Skype credit is low, or any Skype service is close to expiry.
*1
Silent mode
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Icon
Getting Started
Meaning
*1
Handset ringer is off.
*1
Keypad locked
*1
PIN locked
*1 These icons align to the left in the order of priority.
Skype status icons
While in Idle mode:
Skype status icons represent your current Skype status.
Icon
Status
Online: Indicates that you are signed in to Skype and online. You can
make calls and accept calls that are allowed by your Privacy settings
(page 82).
Offline: Indicates that you are not connected to Skype, but you have
still been authenticated as a Skype user.
Skype Me: Indicates that you are available for anyone to call. This
mode temporarily disables your Privacy settings (page 82).
Away: Indicates that you are currently away from phone, but you are
still signed in to Skype and can make calls.
Do Not Disturb: Indicates that you are signed in to Skype, but do not
want to receive calls. In this mode, the ringer tone is set to be silent.
Invisible: Indicates that you are offline, but you are still signed in to
Skype and can make calls.
Not Available: Indicates that you are currently not available, but you
are still signed in to Skype and can make calls.
Connecting: Indicates that you are connecting to Skype.
For assistance, please visit http://www.panasonic.com/phonehelp
55
Getting Started
Temporary Confidential
While in Contacts list:
Skype status icons represent the current Skype status of the contacts in Contacts list.
Icon
Status
Online: Indicates that the contact is signed in to Skype and online.
Offline: Indicates that the contact is not signed in to Skype.
Skype Me: Indicates the contact is available for calls from anyone.
Away: Indicates that the contact is signed in to Skype but currently
away.
Do Not Disturb: Indicates that the contact is signed in to Skype but
does not want to receive calls.
Not Available: Indicates that the contact is signed in to Skype but is
currently not available.
Blocked: The contact is blocked and cannot contact you.
Pending: Indicates that the contact is pending your authorization.
Offline Voicemail: Indicates that the contact is not signed in to Skype
but can receive Voicemails.
Calls Forwarded: Indicates that the calls are forwarded to a specified
number.
SkypeOut: Indicates the contact is a SkypeOut contact.
SkypeOut Blocked: Indicates the SkypeOut contact is blocked and
cannot contact you.
Display back light
After 10 seconds of inactivity, the display back light is turned off in order to preserve the life
of the battery.
To turn on the display back light
To use the handset when the display back light is turned off, press any key to turn the
display back light on again.
56
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Getting Started
Main menu
Skype’s Main menu provides 7 menus as shown below.
While in Idle mode, press {Menu} (middle soft key).
Select the desired menu. i {Select}
Menu
Description
Page
Contacts
Lists Skype and SkypeOut contacts, and shows their
current Skype status.
61
History
Lists missed calls, incoming calls, outgoing calls,
Voicemails and Authorization requests.
77
Status
Defines your personal Skype settings.
Change status: Changes your Skype online status.
79
My profile: Changes your Skype profile details.
79
Sign out: Signs you out of Skype.
80
Add contact
Adds Skype and SkypeOut contacts to your Contacts list. 62
Search
Searches for Skype contacts over the Internet.
Services
Shows Skype credit, SkypeIn and Voicemail information. 92
For assistance, please visit http://www.panasonic.com/phonehelp
64
57
Getting Started
Temporary Confidential
Menu
Description
Page
Settings
Configures handset settings.
81
Network: Searches for networks, manages preferred
networks, and sets auto-connection to open networks.
83
General: Changes your password, sets auto sign-in,
updates software, and resets handset settings.
85
Call divert: Sets call forwarding, Voicemail and
welcome messages.
71
Privacy: Restricts incoming calls to those you specify.
82
Tones: Sets the ringer type, tones and volume.
88
Time and Date: Sets the time and date.
60
Blocked users: Shows blocked users list and unblocks
users you desire.
67
Phone settings: Locks the handset, changes the
handset PIN code, registers the handset to the base unit,
adjusts the brightness of the handset display, and allows
you to decide whether to save the battery.
89
Information: Shows the handset information such as
product ID, software/firmware versions and MAC
address.
90
Advanced: Sets the notification for a software update,
and sets network proxy.
91
The following sub menus in “Settings” menu are available even when you are not
signed in to Skype.
L Network
L Software updates (in “General”)
L Reset (in “General”)
L Keypad tone (in “Tones”)
L Time and Date
L Phone settings
L Information
L Advanced
58
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
Temporary Confidential
Power screen
Power screen is another main menu that provides different
functions such as turning the silent mode on or off, viewing the list
of networks, changing your profile details and Skype status, etc.
Functions available in the menu depend on whether you are
signed in to Skype.
While in Idle mode, press {Options}.
Select the desired menu. i {Select}
Menu
Silent
Sounds on
Change status*1
My profile*1
Sign out*1
View networks
Network details
Description
Sets the silent mode to on.
Sets the silent mode to off.
Changes your Skype online status.
Changes your Skype profile details. See page 79 for
details.
Signs you out of Skype.
Shows a list of networks found in the area.
Shows network connection information.
*1 Available only when you are signed in to Skype.
For assistance, please visit http://www.panasonic.com/phonehelp
59
Getting Started
Temporary Confidential
Setting the time and date
Set the correct date and time before you start using the handset.
{Menu} (middle soft key)
“Settings” i {Select}
“Time and Date” i {Select}
Select the desired setting.
Time
Time zone
Daylight saving
Date
Date format
Enter the current hour and minute (12-hour clock
format) by selecting 2 digits for each. Press {*} to
select “AM” or “PM”. i {OK}
Select the desired item. i {Select}
Select “Standard” or “Daylight saving”. i
{Select}
Enter the current month, day and year by selecting 2
digits for month and day, and 4 digits for year. i
{Select}
Select the desired format. i {Select}
Note:
L If you make a mistake when entering the date and time, press {<} or {>} to move the
cursor, then make the correction.
L Changing “Time zone” and “Daylight saving” sets the displayed time forward or
backward. When you set the time and date for the first time, set the time after all the
other Time and Date settings.
60
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Managing Contacts
Contacts list
Your Contacts list displays all of the names you can make calls to. If you have an existing
Skype account, your Contacts list is automatically downloaded when you sign in. If you are
new to Skype and have just created an account, your Contacts list will be empty. You will
need to add contacts to your list (page 62).
Skype protects the privacy of users by requiring authorization on names that you wish to
add to your Contacts list. When you add a name to your list, an authorization request is
sent to the user. The user can accept or deny the request. When a request is accepted,
you can see when the contact is online and make calls to them. You can also view their
personal profile details.
While in Idle mode, press {CONTACTS}.
Select the desired contact.
L To view the contact’s profile, press {Select}.
L To call the contact, press {{} or {s}.
L To access options, press {Options} and select the desired
option. i {Select}
Note:
L In step 1, you can also press {Menu} (middle soft key). i
“Contacts” i {Select}
For assistance, please visit http://www.panasonic.com/phonehelp
61
Managing Contacts
Temporary Confidential
Adding contacts
You can add up to 500 contacts to your Skype Contacts list and search for contacts by
name.
Important:
L You can not add any more than 500 contacts; otherwise the Contacts list in your handset
cannot be synchronized with the PC version of Skype Contacts list. If you happen to add
more than 500 contacts to the PC version of Skype Contacts list, you need to delete the
unwanted contacts only from the PC version of Skype Contacts list.
L Your Contacts list also includes the blocked user contacts. If your Contacts list exceeds
the limit, you may want to delete the blocked user contacts before deleting other
contacts. To delete the unwanted contacts, see “Contacts list options” on page 65.
Adding Skype contacts
{Menu} (middle soft key)
Press {OK} to send an Authorization request to the added contact.
“Add contact” i {Select}
“Skype” i {OK}
Enter the Skype name (max. 32 characters). i {OK}
Press {Yes} to add the contact to your list and to authorize the
contact to see when you are online.
L Press {No} to add the contact without the authorization.
Enter text to send with the request (max. 200 characters). i {OK}
{OK}
Note:
L You can also search and add Skype contacts from “Search” menu (page 64).
L In step 6, the Authorization request is sent to the newly added contact so that the person
will allow you to see when the person is online.
L For text entry, see page 49 for details.
62
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Managing Contacts
Adding SkypeOut numbers
You can add non-Skype (SkypeOut) numbers to your Contacts list. SkypeOut numbers
are listed with “
” icon in your Contacts list.
{Menu} (middle soft key)
{Save}
“Add contact” i {Select}
“SkypeOut number” i {OK}
“Contact’s name” i {Select}
Enter the name (max. 50 characters). i {OK}
“Phone number” i {Select}
Enter the phone number (max. 20 digits). i {OK}
L The phone number should start with the country code.
{OK}
Note:
L For text entry, see page 49 for details.
L In step 7, enter the phone number in the following way (even for local calls):
“country code” + “area code” + “local phone number”
Example (using the country code “1” for calling USA):
+ 1 555 321 5555
– “+” (international prefix) is automatically added.
– In case of some countries, delete “0” at the first digit of the area code.
– To correct a digit, press {CLEAR}.
For assistance, please visit http://www.panasonic.com/phonehelp
63
Managing Contacts
Temporary Confidential
Searching for Skype contacts
You can search the Skype directory for your desired Skype contacts over the Internet so
that you can call, add to your Contacts list, or view the profiles of the contacts.
{Menu} (middle soft key)
“Search” i {Select}
Enter the name or email address to search for. i {OK}
Select the desired Skype contact.
L To view the contact’s profile, press {Select}.
L To call the contact, press {{} or {s}.
L To access options, press {Options} and select the desired
option. i {Select}
More results
Shows the next 20 results.
Previous results
Shows the previous 20 results.
Search again
Searches again with another keyword.
Add to contacts
Adds the contact to your Contacts list.
View profile
Shows the profile of the contact.
Note:
L For text entry, see page 49 for details.
64
For assistance, please visit http://www.panasonic.com/phonehelp
Managing Contacts
Temporary Confidential
Contacts list options
You can access the option menu while viewing the Contacts list.
While in Idle mode, press {CONTACTS}.
Select the desired contact. i {Options}
Select the desired option. i {Select}
Call*1
Calls the contact. Select the desired phone number to
call. i {Select}/{{}/{s}
Send Voicemail*1
Sends Voicemail to the contact.
Rename*1
Renames the display name of the contact.
Remove
Removes the contact from your Contacts list. Select
“Remove and block” or “Remove only”.
Block user
Blocks or unblocks the contact (Skype status icon
changes after setting).
Unblock user
Request auth.*1
Sends an Authorization request to the contact (page 62).
Options are not available if a request is already sent.
Add SkypeOut*1
Adds a SkypeOut contact to your Contacts list.
Edit*2
Edits the SkypeOut contact’s name and phone number.
*1 Available only for Skype contacts.
*2 Available only for SkypeOut contacts.
Note:
L In step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}
L You can also access the Contacts list options when viewing a contact profile.
In step 2, press {Select} after finding the desired contact to view the contact profile.
Then, press {Options} to access the options.
L Contacts are listed alphabetically in the following order:
– Online Skype contacts
– Offline Skype contacts with call forwarding number and SkypeOut contacts
– Offline and unauthorized Skype contacts
L In step 2, you can also search for a contact by initial. Press the dial key ({0} – {9}) that
corresponds to the first letter(s) of the contact you are searching for. When the list of
contacts is displayed, select the desired contact.
For assistance, please visit http://www.panasonic.com/phonehelp
65
Managing Contacts
Temporary Confidential
Viewing a contact profile
You can view the profile of the contact you select.
While in Idle mode, press {CONTACTS}.
Select the desired contact. i {Select}
Note:
L In step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}
L The display name of the contact may not be properly displayed due to the fact that the
name is entered in the type of writing other than the Roman alphabet. In this case, press
{Options}, and select “Rename” to change the name.
L You can also view the profile by pressing {CONTACTS}. i Select the desired contact.
i {Options} i “View profile”
66
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Managing Contacts
Blocking contacts
Blocking contacts
You can block contacts that you do not wish to receive calls from in your Contacts list.
While in Idle mode, press {CONTACTS}.
Select the desired contact. i {Options}
“Block user” i {Select}
Unblocking contacts
You can unblock contacts that are blocked in your Contacts list.
While in Idle mode, press {CONTACTS}.
Select the desired contact. i {Options}
“Unblock user” i {Select}
To unblock contacts that are removed and blocked:
Contacts that are removed and blocked from Contacts list go to the blocked users list.
You can release the blocked contacts from the blocking status.
{Menu} (middle soft key)
“Settings” i {Select}
“Blocked users” i {Select}
Select the desired user. i {Unblock}
For assistance, please visit http://www.panasonic.com/phonehelp
67
Making/Answering Calls
Temporary Confidential
Making calls
Using the Contacts list
You can make a Skype call by selecting a Skype contact from the Skype Contacts list.
You must add Skype contacts in the Contacts list beforehand by using your handset
or PC version of Skype. See “Adding contacts” on page 62.
While in Idle mode, press {CONTACTS}.
{{}
L To make a call using the speakerphone, press {s}.
When you finish talking, press {}}.
Select the desired Skype contact.
L Skype contact and its current status icon (page 55) are
displayed.
Note:
L In step 1, you can also press {Menu} (middle soft key). i “Contacts” i {Select}
L In step 2, you can also search for a contact by initial. Press the dial key ({0} – {9}) that
corresponds to the first letter(s) of the contact you are searching for. When the list of
contacts is displayed, select the desired contact.
To call from the contact’s profile
You can also make a call while viewing the contact’s profile. In step 2, press {Select} to
display the contact’s profile after you select the desired Skype contact, then press {{} or
{s}.
Using History
The following are logged in History: last 50 missed calls, 20 incoming calls, 20 outgoing
calls, 100 Voicemails and 20 Authorization requests.
68
{Menu} (middle soft key)
“History” i {Select}
Select the desired list. i {Select}
Select the desired log.
For assistance, please visit http://www.panasonic.com/phonehelp
5
Temporary Confidential
Making/Answering Calls
{{}
L To make a call using the speakerphone, press {s}.
When you finish talking, press {}}.
Note:
L In step 1, you can also press {{} to access Outgoing calls list i {<} or {>} to switch
between Outgoing calls, Incoming calls and Missed calls list, then skip to step 4.
Making regular phone calls (SkypeOut)
SkypeOut is a way to make calls from Skype to persons who use landline telephones or
mobile phones. Making SkypeOut calls is not free of charge. Before using the SkypeOut,
purchase the Skype credit on your Skype account page. For more information about
SkypeOut, see the Skype website (http://www.skype.com/).
While in Idle mode, enter the phone number in the following way (even for local calls):
“country code” + “area code” + “local phone number”
Example (using the country code “1” for calling USA):
+ 1 555 321 5555
L “+” (international prefix) is automatically added.
L In case of some countries, delete “0” at the first digit of the area code.
L To correct a digit, press {CLEAR}.
{{}
L To make a call using the speakerphone, press {s}.
When you finish talking, press {}}.
Using the speakerphone
During a conversation, press {s} to turn on the speakerphone.
When you finish talking, press {}}.
Note:
L Use the speakerphone in a quiet environment.
L To switch to the receiver, press {{}.
Adjusting the receiver/speaker volume
Press {^} or {V} repeatedly while talking.
For assistance, please visit http://www.panasonic.com/phonehelp
69
Making/Answering Calls
Temporary Confidential
Answering calls
When a call is being received, the handset rings and the ringer indicator on the handset
flashes rapidly.
Press {{} or {s}.
When you finish talking, press {}}.
Note:
L When a call is received while you are in the “Do Not Disturb” mode of the online Skype
status (page 55), the handset does not ring. To change the Skype status, see “Change
status” on page 59.
L The handset does not ring when the handset ringer is set to off or silent mode is set to
on.
Temporary ringer off
While the handset is ringing, you can turn the ringer off temporarily by pressing {Silent}.
Adjusting the ringer volume
{Menu} (middle soft key)
“Settings” i {Select}
“Tones” i {Select}
“Ring volume” i {Select}
Press {^} or {V} repeatedly to select the desired volume. i {OK}
Rejecting the call
While the handset is ringing, press {}}.
Note:
L Pressing {}} to reject a call saves the log in Incoming calls list.
70
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Making/Answering Calls
Diverting calls
This feature diverts incoming calls to the Voicemail box or other phone numbers that have
been registered as the call divert destinations when you cannot answer the call within a
certain amount of time or when you are offline.
Setting the call divert destination
You need to set specific phone numbers or the Voicemail box as the call divert destination
in advance.
Note:
L If no phone numbers are set as the call divert destination, unanswered calls are
forwarded to the Voicemail box.
L If both other phone numbers and the Voicemail box are set as the destination, the
unanswered calls will be forwarded to the other phone numbers first.
L You need to subscribe to the Skype Voicemail service to divert calls to the Voicemail
box. You also need to subscribe to the SkypeOut service if you want to divert calls to
landline or mobile phone numbers (SkypeOut numbers). If you do not subscribe to the
Skype Voicemail and SkypeOut services, you can only divert incoming calls to a Skype
contact.
Diverting to other numbers:
{Menu} (middle soft key)
“Settings” i {Select}
“Call divert” i {Select}
“Call forwarding” i {Select}
“Yes” i {Select}
Select the desired destination number field. i {Select}
Enter the Skype name or SkypeOut number. i {OK}
{OK}
Note:
L For text entry, see page 49 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
71
Making/Answering Calls
Temporary Confidential
Diverting to Voicemail box:
Voicemail is an automatic answering service offered by Skype. After you subscribe to this
service, Skype Voicemail system will answer calls for you when you are offline or
unavailable to answer the phone within about 15 seconds. Messages are recorded in
Skype Voicemail box, not your handset. To listen to Voicemail messages, see “Listening to
Voicemail messages” on page 73.
Note:
L Please visit the Skype homepage for details: http://www.skype.com/
{Menu} (middle soft key)
“Settings” i {Select}
“Call divert” i {Select}
“Voicemail” i {Select}
“Yes” i {Select}
To record a new Welcome message:
{Menu} (middle soft key)
“Settings” i {Select}
“Call divert” i {Select}
“Welcome message” i {Select}
{Options}
“Record new” i {Select}
Record your message after the beep (max. 1 minute).
Press {End} when finished.
{OK}
Note:
L To play back the welcome message, press {Play} in step 5.
L In step 6, you can reset the Welcome message to default by selecting “Reset to
default”. i {Select}
72
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Making/Answering Calls
Skype Voicemail
You can receive Voicemail messages if you subscribe to Skype Voicemail service.
You can also send Voicemail messages to contacts who have Skype Voicemail service.
To receive Voicemail messages, you must set the call divert destination to “Voicemail”
(page 72).
Listening to Voicemail messages
The handset lets you know that you have new Voicemail messages in the following ways:
– Charge/Ringer indicator flashes for about 5 seconds.
– A new Voicemail notification is displayed.
–“
” is displayed in Idle screen.
– An incoming message tone is heard.
While a new Voicemail notification is displayed on the screen, press {View} to access
the Voicemail list in “History”.
Select the desired Voicemail log. i {Options}
“Play” i {Select}
L The handset starts playing back the message.
L Press {s} to switch to the speakerphone.
L Press {{} to switch to the receiver if you are on the speakerphone.
L Press {^} or {V} to adjust the volume.
L Press {Stop} to stop the message.
Note:
L In step 1, you can also access the Voicemail list by pressing the following:
– {Menu} i “History” i {Select} i “Voicemails” i {Select}
For assistance, please visit http://www.panasonic.com/phonehelp
73
Making/Answering Calls
Temporary Confidential
Sending Voicemail messages
You can send Voicemail messages using your Contacts list or Voicemail history.
{Menu} (middle soft key)
“Contacts” i {Select}
Select the desired contact. i {Select}
{Options}
“Send Voicemail” i {Select}
After the greeting message is played and the beep sounds, record your message.
Press {End} when you finish recording.
{OK}
Note:
L In step 2, you can also select “History”. i {Select} i “Voicemail” i {Select}
74
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Making/Answering Calls
Useful features during a call
Hold
This feature allows you to put a call on hold.
Press {Hold} during a call.
To release the hold, press {Resume} or {{}.
L To release the hold while on the speakerphone, press {Resume} or {s}.
Mute
While mute is turned on, you can hear the other party, but the other party cannot hear you.
To mute your voice, press {MUTE}.
L To return to the conversation, press {MUTE} or {{}.
L To return to the conversation on the speakerphone, press {MUTE} or {s}.
Call Waiting
This feature allows you to receive calls while you are already talking on the phone. If you
receive a call while on the phone, you will hear a Call Waiting tone.
Press {Answer} to answer the 2nd call after the tone.
To switch between calls, press {Switch}.
To resume conversation, press {Resume}.
Conference
You can have a conversation with more than one person at the same time.
When you receive a conference call, press {{} or {s}.
L The status bar at the top of the screen shows “Conference”.
L To reject the conference call, press {}}.
Note:
L You cannot be a host in conference calls but can only be a guest.
For assistance, please visit http://www.panasonic.com/phonehelp
75
Making/Answering Calls
Temporary Confidential
DTMF
You can send DTMF tones while on a call in order to access paging, computerized home
banking, etc.
While on a call, press {0} – {9}, {*} or {#}.
76
For assistance, please visit http://www.panasonic.com/phonehelp
Managing History
Temporary Confidential
History
The following events are logged in History: 50 missed calls, 20 incoming calls, 20 outgoing
calls, 100 Voicemails and 20 Authorization requests. These logged events are listed in the
chronological order, most recent first.
{Menu} (middle soft key).
“History” i {Select}
Select the desired list. i {Select}
Press {V} to search from the most recent log, or {^} from the
oldest.
L To view the log, press {Select}.
L To call back, press {{} or {s}.
L To access options, press {Options} and select the desired
option. i {Select}
Send Voicemail*1
Sends Voicemail to the contact.
Delete*1
Deletes the log.
View profile*1
Shows the profile of the contact.
Add to contacts*1
Adds the contact to your Contacts list.
Clear list*1*2
Deletes the entire list.
Play*3
Plays the Voicemail (page 73).
My greeting*3
Plays back the Voicemail welcome message. Press
{Options} for more options: “Record new” and
“Reset to default”.
*1 Not available for Authorization logs.
*2 Not available for Voicemail logs.
*3 Available only for Voicemail logs.
Note:
L In step 1, you can also press {{} to access Outgoing calls list. i {<} or {>} to switch
between Outgoing calls, Incoming calls and Missed calls list, then skip to step 4.
L The logs that have not been viewed are displayed with a new missed call icon “ ”.
For assistance, please visit http://www.panasonic.com/phonehelp
77
Managing History
Temporary Confidential
L To access options while viewing the Voicemail or Authorization log, press {Options}
and select the desired option. i {Select}
Block user*1
Blocks the contact.
Unblock user*1
Unblocks the contact.
Request auth.*1
Sends an Authorization request to the contact.
Accept*2
Accepts the Authorization request from the contact.
Decline*2
Declines the Authorization request from the contact.
*1 Available only for Voicemail logs.
*2 Available only for Authorization logs.
78
For assistance, please visit http://www.panasonic.com/phonehelp
Personal Skype Status and Settings
Temporary Confidential
Personal Skype status and profile
Skype status and profile features allow you to define your Skype online status and
personal profile details, and to sign out of Skype.
Changing your status
You can change your Skype online status to let other users know when to call you.
While in Idle mode, press {Options}.
“Change status” i {Select}
Select the desired Skype status. i {Select}
L See the Skype status icon list on page 55.
Note:
L In step 1, you can also press {Menu} (middle soft key). i
{Select} i “Status” i {Select}
Setting your profile
You can enter your profile data in My profile. In your public profile, you do not need to fill
in all the fields; however, your country and city information will be helpful for others to
identify you.
While in Idle mode, press {Options}.
“My profile” i {Select}
Select the desired setting. i {Select}
Details shown to all Allows you to enter your profile details open to public.
Set your profile so that other Skype users can identify
you.
Private details
Allows you to enter your private details.
Fill in the fields or select the desired item of My profile information. i {OK}/{Select}
Note:
L In step 1, you can also press {Menu} (middle soft key). i {Select} i “Status” i
{Select}
L You need to sign in to Skype to access “My profile”.
For assistance, please visit http://www.panasonic.com/phonehelp
79
Personal Skype Status and Settings
Temporary Confidential
L For text entry, see page 49 for details.
Signing out of Skype
This feature signs you out of Skype. However, if you sign out, your Contacts list will not be
available.
While in Idle mode, press {Options}.
“Sign out” i {Select}
Press {OK} when confirmation message appears.
Note:
L In step 1, you can also press {Menu} (middle soft key). i {Select} i “Status” i
{Select}
80
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Personal Skype Status and Settings
Personal Skype settings
Personal Skype settings allow you to define your password, and protect your privacy by
restricting incoming calls to only the specified types of calls.
Changing your password
This feature changes the password to sign in to Skype.
{Menu} (middle soft key)
“Settings” i {Select}
“General” i {Select}
“Change password” i {Select}
Enter your current password. i {OK}
Enter your new password. i {OK}
Repeat the new password. i {OK}
Important:
L Please keep your password securely.
Note:
L For text entry, see page 49 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
81
Personal Skype Status and Settings
Temporary Confidential
Privacy settings
This feature allows you to restrict incoming calls to only those from the specified types of
callers.
{Menu} (middle soft key)
“Settings” i {Select}
“Privacy” i {Select}
Select “Calls” or “SkypeIn calls”. i {Select}
Select the desired type of callers that you want to receive calls from. i {Select}
When you select “Calls” in step 4:
Anyone
All Skype users
Only contacts
Only Skype contacts listed in your Contacts list
Only authorized
Only authorized Skype contacts listed in your Contacts
list
When you select “SkypeIn calls” in step 4:
82
Anyone
All SkypeIn callers
Known numbers
Only SkypeIn callers notifying of their numbers
Only contacts
Only non Skype contacts listed in your Contacts list
For assistance, please visit http://www.panasonic.com/phonehelp
Handset Settings
Temporary Confidential
Wi-Fi network settings
Network menu allows you to set the handset to connect to wireless networks when the
handset is powered on. You need to configure network settings only when you want to use
an access point other than the KX-WPA102 base unit.
Finding wireless networks
The handset searches for networks within the area to connect to the desired network.
{Menu} (middle soft key)
“Settings” i {Select}
“Network” i {Select}
“Networks in range” i {Select}
Select the desired network. i {Connect}
L The padlock icon indicates a secure network.
L While viewing the list, you can also press {Options} to
select the desired setting. i {Select}
Network details
Shows the selected network details.
Search again
Searches for other networks in range.
Add manually
Adds the network to your Preferred networks list.
Preferred networks
Shows your Preferred networks list.
Note:
L In step 1, you can also press {Options} while in Idle mode to access the list of networks
in range, then skip to step 5.
For assistance, please visit http://www.panasonic.com/phonehelp
83
Handset Settings
Temporary Confidential
Preferred networks
Preferred networks manages the networks stored in the handset and allows you to
connect to the network you usually use.
{Menu} (middle soft key)
“Settings” i {Select}
“Network” i {Select}
“Preferred networks” i {Select}
Select the desired network. i {Select} to view the network properties.
L While viewing the list, you can also press {Options} to select the desired setting. i
{Select}
Add current
Adds the currently connected network to your
Preferred networks list.
Add manually
Adds networks manually to the list.
Move up
Moves the selected network up in the list.
Move to top
Moves the selected network to the top of the list.
Move down
Moves the selected network down in the list.
Remove network
Removes the selected network from the list.
Remove all networks
Removes all the networks from the list.
Auto-connect to open networks
Auto-connect allows you to decide whether to connect to open networks automatically.
An open network is one that is not encrypted, so that anyone within the vicinity can
connect to the network without any password.
84
{Menu} (middle soft key)
“Settings” i {Select}
“Network” i {Select}
“Auto-connect” i {Select}
Select {Yes} or {No} to decide whether you want to auto-connect to open networks.
i {Select}
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Handset Settings
General settings
Auto sign in
Auto sign in allows you to sign in to Skype automatically when the
handset is starting up.
{Menu} (middle soft key)
“Settings” i {Select}
“General” i {Select}
“Auto sign in” i {Select}
Select “Automatically” or “Manually”. i {Select}
Updating software
This feature updates the Skype application or Panasonic firmware in the handset.
{Menu} (middle soft key)
“Settings” i {Select}
“General” i {Select}
“Software updates” i {Select}
To update the Skype application:
Press {OK} to update the application if a new version is available.
Read and accept the Skype agreement. i {Yes}
Plug the CHARGE cable into the handset and the base unit for battery charging (page
45) if the battery is not fully charged. i {OK}
{OK}
L The handset begins to restart.
To update the Panasonic firmware:
Start up the Web browser on your computer connected to the LAN port on the base
unit.
For assistance, please visit http://www.panasonic.com/phonehelp
85
Handset Settings
Temporary Confidential
Handset:
Press {OK} to update the firmware if a new version is available.
Handset:
Plug the CHARGE cable into the handset and the base unit for battery charging (page
45) if the battery is not fully charged. i {OK}
Handset:
Enter your PIN code if prompted.
Computer:
Enter the URL displayed on the handset in the address field of your browser and press
ENTER key.
10 Computer:
Enter the user name and the password (shown on the handset display) when
prompted.
11 Computer:
Follow the on-screen instructions of the Web Update Firmware page on your browser.
LThe handset starts downloading the updated Panasonic firmware.
12 Handset:
Press {OK} to restart the handset.
LThe handset begins to restart.
To receive software update notification:
You can allow the handset to notify you of software updates.
86
{Menu} (middle soft key)
“Settings” i {Select}
“Advanced” i {Select}
“Software updates” i {Select}
Select “Yes” or “No”. i {Select}
For assistance, please visit http://www.panasonic.com/phonehelp
Handset Settings
Temporary Confidential
Reset
This feature resets all the handset settings or all except the network settings.
{Menu} (middle soft key)
“Settings” i {Select}
“General” i {Select}
“Reset” i {Select}
Select “Keep network” or “Reset all”. i {Select}
Keep network
Resets all the handset settings except “Preferred
networks”, “Auto-connect” and “Network proxy”.
Reset all
Resets all the handset settings. However, the contacts
stored on your PC version of Skype Contacts list will be
downloaded and displayed on your handset’s Contacts
list when you sign in to Skype with the handset.
{Yes}
Enter your handset PIN code if prompted. i {OK}
L The handset begins to restart after 3 seconds.
Note:
L If you select “Reset all” in step 5, you need to register the handset to the base unit.
See “Registering the handset” on page 93 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
87
Handset Settings
Temporary Confidential
Tones
You can change the handset’s ringer type, tone and volume, and other types of tones.
88
{Menu} (middle soft key)
“Settings” i {Select}
“Tones” i {Select}
Select the desired setting. i {Select}
Ring type
Sets the ringer type: “Ringing” or “Ring once”.
Ring tone
Sets the desired ringer tone.
Ring volume
Adjusts the ringer volume.
Notification tone
Sets the notification tone to “On” or “Off”.
Keypad tone
Sets the keypad tone to “On” or “Off”.
Out of service tone
Sets the out-of-service tone to “On” or “Off”.
Hold tone
Sets the desired hold tone.
Select the desired item. i {Select} or change the setting by pressing {^} or {V}. i
{OK}
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Handset Settings
Phone settings
Handset PIN locked:
This feature locks the handset with the PIN code for security purpose.
{Menu} (middle soft key)
“Settings” i {Select}
“Phone settings” i {Select}
“HS PIN locked” i {Select}
Enter the handset PIN code (4 digits).
{Yes}
L The handset is locked.
{OK}
Note:
L The default PIN code is “0000”.
Changing handset PIN:
This feature changes the handset PIN code.
{Menu} (middle soft key)
“Settings” i {Select}
“Phone settings” i {Select}
“Change HS PIN” i {Select}
Enter the current handset PIN code.
Enter the new handset PIN code (4 digits).
Repeat the new handset PIN code.
{OK}
For assistance, please visit http://www.panasonic.com/phonehelp
89
Handset Settings
Temporary Confidential
Brightness:
This feature adjusts the brightness of the screen.
{Menu} (middle soft key)
“Settings” i {Select}
“Phone settings” i {Select}
“Brightness” i {Select}
Press {<} or {>} to adjust the brightness.
{OK}
Battery saving:
This feature allows you to decide whether you want to save the battery.
{Menu} (middle soft key)
“Settings” i {Select}
“Phone settings” i {Select}
“Battery saving” i {Select}
Select {Yes} or {No} to decide whether you want to save the battery.
Note:
L In step 5, selecting {No} may reduce talk delay, but shortens talking time.
Handset Information
Information shows the device information such as product ID, software/firmware version
and MAC address.
90
{Menu} (middle soft key)
“Settings” i {Select}
“Information” i {Select}
For assistance, please visit http://www.panasonic.com/phonehelp
Handset Settings
Temporary Confidential
Advanced settings
Network proxy:
Network proxy allows you to decide whether you want to use proxy servers on the LAN for
Skype traffic.
{Menu} (middle soft key)
“Settings” i {Select}
“Advanced” i {Select}
“Network proxy” i {Select}
Select the desired item. i {Select}
Proxy type
Selects the proxy server type from “None”, “HTTP/
HTTPS” or “SOCKS5”.
Host
Specifies the proxy server name (max. 100 characters).
Port
Specifies the proxy port number used by the proxy
server (value: 1–65535).
Authentication
Enables or disables the proxy authentication which
requires the user name and password to access the
Internet.
User name
Specifies the user name for proxy host authentication
(max. 127 characters).
Password
Specifies the password for proxy host authentication
(max. 127 characters).
Enter the information. i Press {OK} or select the desired item. i {Select}
{Save}
Note:
L For text entry, see page 49 for details.
For assistance, please visit http://www.panasonic.com/phonehelp
91
Services
Temporary Confidential
Service information
You can view the information of the following optional services by Skype: Skype credit,
SkypeIn and Skype Voicemail.
Note:
L SkypeIn numbers are regular phone numbers sold on a
subscription basis. If your friends who are not using Skype
want to call you, they can call your SkypeIn number and you
receive the call in Skype.
If you buy a SkypeIn number, you get a free Skype Voicemail
subscription along with it.
L To purchase Skype credit or SkypeIn with Skype Voicemail,
visit http://www.skype.com/
Viewing the service information
92
{Menu} (middle soft key)
“Services” i {Select}
Select the desired item. i {Select}
Skype credit
Shows the remaining Skype credit available and the
expiration date.
SkypeIn
Shows the list of the SkypeIn numbers you subscribe to.
If you subscribe to only one SkypeIn number, the
number is displayed with its expiration date.
Voicemail
Shows the expiration date of the Skype Voicemail
service.
If you select “Skype credit” or “Voicemail”, view the information. i Press {V} to
scroll down for more information.
If you select “SkypeIn”, select the desired number. i {Select} i View the
information. i Press {V} to scroll down for more information.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Handset Locator
Registering the handset
The handset and base unit are preregistered. If for some reason the handset is not
registered to the base unit, or after you reset all the handset settings (page 87), register
the handset.
LOCATOR indicator
LOCATOR button
{Menu} (middle soft key)
“Settings” i {Select}
“Phone settings” i {Select}
“HS registration” i {Select}
Press and hold LOCATOR button on the base unit for 3 seconds. i {OK}
{OK}
Note:
L In step 4, select “Information” to view the network name and BSSID information of
the base unit. i {Select}
L You cannot register additional handsets to the base unit.
L While the handset is being registered, the LOCATOR indicator on the base unit is
flashing.
For assistance, please visit http://www.panasonic.com/phonehelp
93
Handset Locator
Temporary Confidential
Locating the handset
You can locate the misplaced handset by paging it from the base unit.
Base unit:
Press LOCATOR button to page the handset.
L The LOCATOR indicator on the base unit lights up.
L The handset beeps for 1 minute, and the display, keypad and ringer indicator light up.
Base unit:
To stop paging, press LOCATOR button.
OR
Handset:
To stop paging, press any key except {CONTACTS}, {*}, {#}, Navigator key and
Middle soft key.
Note:
L The handset locates only the registered handset.
94
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Setting the base unit from Top Menu
After the settings in Initialization Wizard (page 27) are successfully completed, Top Menu
will be displayed on the top page each time you log in the base unit.
Open your Web browser on your computer connected to the LAN (Ethernet) port on the
base unit.
Enter http://192.168.0.242/ (the base unit’s default IP address) or http://kxwpa.webpage in the address field of your browser and press ENTER key. You can
also double click the KX-WPA102 icon in My Network Places in Start menu when using
Windows XP and UPnP is enabled. See “Setting UPnP to display the shortcut” on page
153 for details.
L A screen with fields for your user name and password is displayed.
For assistance, please visit http://www.panasonic.com/phonehelp
95
Base Unit Settings
Temporary Confidential
96
Enter the user name and password you set in Initialization Wizard.
L Top Menu is displayed.
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Network Connection
Creating a new profile of network connection
Click [Network Connection] on Top Menu.
Click [New Profile] under the Network Connection heading.
For assistance, please visit http://www.panasonic.com/phonehelp
97
Base Unit Settings
Temporary Confidential
Enter the profile name.
Select the mode, then click [Next>].
Select the connection mode, then click [Next>].
Configure the connection mode you select in step 5, then click [Next>].
L See “Configuring the Internet connection settings” on page 36 for instructions.
Confirm the settings you are about to save, then click [Save].
Click [Restart].
L The base unit restarts in the connection mode that is registered as HOTEL or HOME
mode profile you have just created (The position of the Mode selector switch
determines the connection mode.).
Modifying the existing network connection profile
98
Click [Network Connection] on Top Menu.
Click [Modify] under the Network Connection heading.
For assistance, please visit http://www.panasonic.com/phonehelp
3
Temporary Confidential
Base Unit Settings
Select the profile you wish to modify from the pull-down menu under the Select Profile
heading, then click [Edit].
L To delete a profile, select the desired profile from the pull-down menu and click
[Delete].
Configure the connection mode of the profile you select in step 3, then click [Next>].
L See “Configuring the Internet connection settings” on page 36 for instructions.
Confirm the settings you are about to save, then click [Save].
Click [Restart].
L The base unit restarts in the connection mode that is registered as HOTEL or HOME
mode profile you have just created (The position of the Mode selector switch
determines the connection mode). However, editing AP (Bridge) mode profile while
the Mode selector is switched to “HOTEL” does not restart the base unit in AP
(Bridge) mode profile.
Note:
L In step 3, if you delete the profile you are currently using for HOTEL or HOME mode, the
profile will be reset to the default setting (DHCP).
For assistance, please visit http://www.panasonic.com/phonehelp
99
Base Unit Settings
Temporary Confidential
Modifying the wireless information
Click [Network Connection] on Top Menu.
Click [Modify] under the Wireless Information heading.
Configure the wireless connection basic settings, then click [Next>].
Setting
[Mode]
[Channel]
[Network Name
(SSID)]
[Broadcast SSID]
L Enable or disable the setting to broadcast your SSID.
Configure the wireless connection security settings, then click [Save].
Setting
[Security Mode]
[WPA-PSK/WPA2PSK Data
Encryption]
[Network key]
[Session-Key
renewal interval]
[Key Index]
Description
L Select your wireless network mode from the pull-down menu.
L Select [Auto] or the desired channel from [1] to [11].
L Enter your wireless network name (SSID) in this data field.
Description
L Select the desired Security Mode.
L Select the desired Data Encryption method.
L Enter the network key containing 10 hexadecimal, 26
hexadecimal, 5 alphanumeric or 13 alphanumeric
characters.
L Press [View] to display the network key.
L Set the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week.
L Select [Key 2] or [Key 3] to be used if you use WEP.
Click [Restart].
100
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Updating the firmware
To prevent leaks of customer information, illegal operation of this product, interference or
involuntary shutdown etc., update firmware regularly. The most recent firmware file can be
found on Panasonic’s Support Website (http://panasonic.biz).
Click [Update Firmware] on Top Menu.
Check for the latest version by clicking the support information URL.
Click [Update].
L The base unit automatically restarts after the firmware is updated.
If the version is updated, download the updated firmware to your PC.
Enter the file name of the downloaded firmware under the “Update Firmware” heading.
L You can also click [Browse...] to select the firmware file name from the list.
For assistance, please visit http://www.panasonic.com/phonehelp
101
Base Unit Settings
Temporary Confidential
Important:
L Do not interrupt the firmware updating process by cutting the power supply until the
updating is complete and the base unit restarts itself.
102
For assistance, please visit http://www.panasonic.com/phonehelp
Base Unit Settings
Temporary Confidential
Advanced Setup
Click [Advanced Setup] on Top Menu.
Click the desired tab, then click the desired item from the menu on the left side.
*1 While in AP (Bridge) mode, Interface Status is displayed instead of WAN Interface
Status and LAN Interface Status.
*2 While in AP (Bridge) mode, these menus are not available.
Tab
Menu
Sub-menu1
Sub-menu2
Status
Network Status
WAN Interface Status*1
Page
106
LAN Interface Status*1
Routing Table
ARP Table
DHCP Lease Table DHCP Server Status*2
107
DHCP Lease Table*2
UPnP Port
Mapping Table
Basic
UPnP Status*2
108
UPnP Port Mapping Table*2
Wireless Status
–
108
Handset Status
–
109
Version
Information
–
109
Save Status
–
110
Internet
Connection
MAC Address
Clone
Profiles
111
Profiles Selection
–
For assistance, please visit http://www.panasonic.com/phonehelp
112
103
Base Unit Settings
Temporary Confidential
Tab
Menu
Sub-menu1
Advanced
LAN/DHCP Server
LAN
Sub-menu2
Page
113
DHCP Server
Port Forwarding
Wireless
Static DHCP (IP Address
Reservation)
115
Port Forwarding
Table
116
Port Forwarding
Setting
DMZ
–
118
UPnP
–
119
Packet Filtering
Packet Filtering
Table
Packet Filtering
Setting
Easy Security
Easy-To-Use Filtering
123
Routing
Static Routing
Table
124
Wireless Basic
Wireless Mode
Routing Setting
120
126
SSID
Authentication/
Encryption
Authentication/Encryption
127
Network Key (WPA-PSK/WPA-PSK)
Network Key (WEP)
MAC Address
Filtering
104
MAC Address Filtering
MAC Address
Filtering Table
MAC Address
Filtering Setting
For assistance, please visit http://www.panasonic.com/phonehelp
129
Base Unit Settings
Temporary Confidential
Tab
Menu
Maintenance
Password
–
131
Update Firmware
–
132
Reset to Factory
Default
–
134
Save Settings
–
135
Loading Settings
–
136
Restart
–
137
Packet Filtering
Log
–
138
UPnP Port
Mapping Log
–
139
Connection Log
–
140
Help
–
141
Support Link
–
142
Support
Sub-menu1
Sub-menu2
For assistance, please visit http://www.panasonic.com/phonehelp
Page
105
Base Unit Settings
Temporary Confidential
Status
Click the [Status] tab, then click the desired item on the left.
[Network Status] Shows the WAN/LAN interface status, and routing and ARP tables.
106
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
[DHCP Lease Table] Shows the DHCP server status and lease table.
For assistance, please visit http://www.panasonic.com/phonehelp
107
Base Unit Settings
Temporary Confidential
[UPnP Port Mapping Table] Shows the UPnP status and port mapping table.
[Wireless Status] Shows the wireless LAN status.
108
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
[Handset Status] Shows the handset connection status.
Note:
L It may take a while to display this screen in order to check if the handset is connected.
[Version Information] Shows the firmware version information.
For assistance, please visit http://www.panasonic.com/phonehelp
109
Base Unit Settings
Temporary Confidential
[Save Status] Allows you to save the status.
110
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Basic setting
Internet Connection:
This feature allows you to select and configure the Internet connection mode.
Click [Advanced Setup] on Top Menu.
Under the Profiles heading, click the entry number of the desired Internet connection
profile to configure the Internet connection mode of the desired profile.
Click the desired Internet connection mode under the Connection Mode heading.
Click [Restart].
Click the [Basic] tab, then click [Internet Connection].
Configure the Internet connection mode you select in step 4, then click [Save].
L See “Configuring the Internet connection settings” on page 36.
Note:
L In step 3, you can set both the Home and Hotel modes to the desired profile by selecting
the profile from the respective pull-down menus under the Profile Selection heading.
For assistance, please visit http://www.panasonic.com/phonehelp
111
Base Unit Settings
Temporary Confidential
L In step 5, if you click [Save] after creating or modifying the profile currently selected for
HOME or HOTEL mode, the profile setting screen will be displayed.
MAC Address Clone:
MAC (Media Access Control) Address Clone allows you to clone the MAC address of your
PC’s network adaptor onto this product.
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification.
Some Internet service providers require that you register the MAC address of your
computer’s network adaptor, which was connected to your cable or DSL modem during
installation.
Click [Advanced Setup] on Top Menu.
Configure the settings, then click [Save].
Click the [Basic] tab, then click [MAC Address Clone].
Setting
[MAC Address Clone]
[Original MAC Address]
[Cloned MAC Address]
Description
L Select whether the MAC address clone feature is
enabled or disabled.
L Base unit’s MAC address is displayed.
L Enter MAC address to be cloned.
Click [Restart].
112
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Advanced setting
LAN / DHCP Server:
This feature allows you to configure the local network settings and DHCP server settings.
Click [Advanced Setup] on Top Menu.
Click the [Advanced] tab, then click [LAN / DHCP Server].
For assistance, please visit http://www.panasonic.com/phonehelp
113
Base Unit Settings
Temporary Confidential
Configure the settings, then click [Save].
Setting
[IP Address]
[Subnet Mask]
[DHCP Server]
[Starting IP
Address]
[Number of Lease
IP Address]
Description
L If your network administrator specifies the private IP address
and subnet mask, enter them in each data field.
L Set 4 digits (0 – 255) and 3 periods such as “192.168.0.253”.
But “0.0.0.0” and “255.255.255.255” are not available.
L DHCP server assigns IP addresses to devices on your LAN.
Select whether to enable or disable this feature.
L Enter the starting IP address for the DHCP server’s IP
assignment.
L Enter the number of the lease IP address (maximum
number: 5). The first IP address is assigned to the handset.
The subsequent ones are assigned to PCs.
Note:
L If you change the LAN side network settings or DHCP server settings, the entries in
Static DHCP table will be deleted.
Click [Restart].
114
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Static DHCP (IP Address Reservation):
Static DHCP function allows you to stabilize the IP address assigned to the computer by
registering the computer’s MAC address.
Click [Add] under the Static DHCP (IP Address Reservation) heading in LAN / DHCP
Server page (page 113), then configure the settings.
Setting
[MAC Address]
[IP Address]
Description
L Enter the LAN card’s MAC address of the corresponding
computer.
L Enter the IP address that you want to stabilize of the
corresponding computer.
L You can also select the setting from the DHCP Server Lease Table. Click [Add] in the
“Operation” column of the table.
Click [Add].
Click [Restart].
Note:
L When you edit the static DHCP setting, click the desired entry number to edit the setting.
Configure the settings, then click [Save].
L When you delete a static DHCP setting, click the desired number, then click [Delete].
For assistance, please visit http://www.panasonic.com/phonehelp
115
Base Unit Settings
Temporary Confidential
Port Forwarding:
This feature allows you to configure the port forwarding settings. Port Forwarding feature
enables other Internet users to access services running on your LAN.
Up to 10 settings can be stored.
Important:
L When setting up the port forwarding feature, there is a possibility of illegal access to the
forwarding port from the Internet. For safety, set this feature only when required.
Click [Advanced Setup] on Top Menu.
Click the [Advanced] tab, then click [Port Forwarding].
116
For assistance, please visit http://www.panasonic.com/phonehelp
3
Temporary Confidential
Base Unit Settings
To add a new entry, click [Add] under the Portforwarding Table heading.
L To edit the setting, click the desired entry number under the Portforwarding Table
heading.
Configure the settings under the Port Forwarding Setting heading, then click [Add] to
add the new entry.
L Click [Save] under the Port Forwarding Setting heading to save the edited settings.
Setting
[No.]
[Status/Port
Forwarding]
[Forwarding IP
Address]
[Protocol]
Description
L Select the desired entry number for the port forward setting.
L Select whether the port forwarding feature is enabled or
disabled.
L Enter the IP address of the computer that is hosting the
service.
L The device registered as the forwarding IP address can be
accessed from the Internet through the registered protocol
and port.
L Select the desired protocol used to access your hosting
service.
For assistance, please visit http://www.panasonic.com/phonehelp
117
Base Unit Settings
Temporary Confidential
Setting
[Port]
Description
L Enter the forwarding port number.
L If you want to set one port, enter its port number only.
L If you want to set a range of ports, enter the port numbers in
the following way: “2000 – 3000”
L When you delete the selected setting, click [Delete].
Click [Restart].
DMZ:
DMZ (DeMilitarized Zone) allows you to configure the DMZ settings. The DMZ feature
allows you to expose a specified computer on your LAN to the Internet.
Important:
L Computers specified as the DMZ host may be vulnerable to security risks.
Click [Advanced Setup] on Top Menu.
Configure the settings, then click [Save].
Click the [Advanced] tab, then click [DMZ].
Setting
[DMZ]
[DMZ Host IP
Address]
118
Description
L Select whether the DMZ feature is enabled or disabled.
L Enter the IP address of the computer that is exposed to the
Internet.
For assistance, please visit http://www.panasonic.com/phonehelp
4
Base Unit Settings
Temporary Confidential
Click [Restart].
UPnP:
UPnP (Universal Plug and Play) allows you to configure the UPnP settings. UPnP feature
allows the base unit to be compliant with the UPnP standard.
Click [Advanced Setup] on Top Menu.
Select the desired setting, then click [Save].
Click the [Advanced] tab, then click [UPnP].
Setting
[UPnP]
Description
L Select whether the UPnP feature is enabled or disabled.
Click [Restart].
For assistance, please visit http://www.panasonic.com/phonehelp
119
Base Unit Settings
Temporary Confidential
Packet Filtering:
The Packet Filtering allows you to configure the packet filtering settings, and to control
Internet access from the specified computers on your LAN.
Up to 20 settings can be stored.
Click [Advanced Setup] on Top Menu.
Click the [Advanced] tab, then click [Packet Filtering].
120
For assistance, please visit http://www.panasonic.com/phonehelp
3
Temporary Confidential
Base Unit Settings
To add a new entry, click [Add] under the Packet Filtering Table heading.
L To edit the setting, click the desired entry number under the Packet Filtering Table
heading.
For assistance, please visit http://www.panasonic.com/phonehelp
121
Base Unit Settings
Temporary Confidential
Configure the settings under the Packet Filtering Setting heading, then click [Add] to
add the new entry.
L Click [Save] under the Packet Filtering Setting heading to save the edited settings.
Setting
[No.]
[Status/Packet
Filtering]
[Action]
[Direction]
[Source IP
Address]
[Source Port]
[Destination IP
Address]
[Destination Port]
[Protocol]
[Log Output]
Description
L Select the desired entry number for the packet filtering
setting.
L Select whether the packet filtering feature is enabled or
disabled.
L Select whether to allow or deny IP packets that are being
received.
L Select [LiW] (filtering when sending to WAN) or [WiL]
(filtering when receiving from WAN).
L Enter the packet source IP address to be filtered.
L If you want to set one IP address, enter the IP address only.
L If you want to set a range of IP addresses, enter the network
address (e.g. 192.168.0.0/16).
L If you want to set the KX-WPA102 IP address, enter “local”.
L If you want to set all IP addresses, enter “*”.
L Enter the packet source port to be filtered.
L If you want to set one port, enter its port number only.
L If you want to set a range of ports, enter the port numbers in
the following way: “2000 – 3000”.
L Enter the packet destination IP address to be filtered.
L The entry is the same as the Source IP Address.
L Enter the packet destination port number to be filtered.
L The entry is the same as the Source Port.
L Select the desired protocol used.
L Set whether to display the temporarily saved packet
information on the [Packet Filtering Log] (page 138).
L When you delete the selected setting, click [Delete].
Click [Restart].
122
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Easy Security:
This feature allows you to easily set up packet filtering.
Click [Advanced Setup] on Top Menu.
Click the [Advanced] tab, then click [Easy Security].
For assistance, please visit http://www.panasonic.com/phonehelp
123
Base Unit Settings
Temporary Confidential
Configure the settings, then click [Save].
Setting
[Transmission/
reception of
Packets with
private IP
addresses via
WAN interface]
[Stateful Packet
Inspection]
Description
L Select whether to deny or allow packets to be sent or
received when the source of an incoming (from WAN side)
packet and the destination of an outgoing (to WAN side)
packet are private addresses. This feature is valid when the
WAN IP address is global. The default is set to Deny.
L Select whether to enable or disable the stateful packet
inspection feature.
L Some E-mail servers authenticate clients using ident packets
which use TCP port 113. If E-mail feature does not work well,
select “Enable (Except Ident Packet)”, which is the default
setting for this feature.
[Attack Detection] L Select whether to enable or disable the attack detection
feature.
L Check the box in the “Log Output” column to create a log of each action.
Click [Restart].
Routing
This feature allows you to set static routing destinations.
Click [Advanced Setup] on Top Menu.
Click the [Advanced] tab, then click [Routing].
124
For assistance, please visit http://www.panasonic.com/phonehelp
3
Temporary Confidential
To add a new entry, click [Add] under the Static Routing Table heading.
L To edit the setting, click the desired number under the Static Routing Table heading.
Configure the settings under the Routing Setting heading, then click [Add].
L Click [Save] under the Routing Setting heading to save the edited setting.
Setting
[Status]
[Destination
Network/Mask]
[Gateway]
Base Unit Settings
Description
L Select whether to enable or disable the routing setting.
L Enter the network/mask for the destination IP address.
L Enter the gateway IP address.
Click [Restart].
For assistance, please visit http://www.panasonic.com/phonehelp
125
Base Unit Settings
Temporary Confidential
Wireless
Wireless Basic:
Wireless Basic allows you to set the wireless mode and SSID.
Click [Advanced Setup] on Top Menu.
Configure the settings, then click [Save].
Click the [Wireless] tab, then click [Wireless Basic].
Setting
[Mode]
[Channel]
[Network Name
(SSID)]
[Broadcast SSID]
Description
L Select your wireless network mode from the pull-down menu.
L Select [Auto] or the desired channel from 1 to 11.
L Enter your wireless network name (SSID) in this data field.
L Enable or disable the setting to broadcast your SSID.
Click [Restart].
126
For assistance, please visit http://www.panasonic.com/phonehelp
Base Unit Settings
Temporary Confidential
Authentication/Encryption:
This feature allows you to set security measures for connecting to wireless LAN.
Click [Advanced Setup] on Top Menu.
Configure the settings, then click [Save].
Click the [Wireless] tab, then click [Authentication/Encryption].
Setting
[Security Mode]
[WPA-PSK/WPA2PSK Data
Encryption]
Description
L Select the desired Security Mode.
L Select the desired Data Encryption method.
For assistance, please visit http://www.panasonic.com/phonehelp
127
Base Unit Settings
Temporary Confidential
Setting
[Network key]
[Session-Key
renewal interval]
[Key Index]
Description
L Enter the network key containing 10 hexadecimal, 26
hexadecimal, 5 alphanumeric or 13 alphanumeric
characters.
L Press [View] to display the network key.
L Set the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week.
L Select [Key 2] or [Key 3] to be used if you use WEP.
Click [Restart].
Note:
L If you change either Network Name (SSID) or Network key, you need to register the
handset to the base unit once again. See “Registering the handset” on page 93.
128
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
MAC Address Filtering:
This feature allows you to configure MAC address filtering settings so that devices without
the particular MAC address will be filtered.
MAC address filtering is available only for wireless devices.
Click [Advanced Setup] on Top Menu.
Click the [Wireless] tab, then click [MAC Address Filtering].
L To add a new MAC address entry, click [Add] under the MAC Address Filtering Table
heading. Enter the desired MAC address under the MAC Address Filtering Setting
heading, then click [Add].
L To edit a MAC address entry, click the desired entry number under the MAC Address
Filtering Table heading. Edit the MAC address under the MAC Address Filtering
Setting heading, then click [Save].
For assistance, please visit http://www.panasonic.com/phonehelp
129
Base Unit Settings
Temporary Confidential
Configure the setting, then click [Save].
Setting
[MAC Address
Filtering]
Description
L Select whether to enable or disable the MAC address filtering
feature.
L If MAC Address Filtering is enabled, only the wireless device
with the registered MAC address can send/receive data.
The registered handset is automatically listed in MAC
Address Filtering Table.
Click [Restart].
130
For assistance, please visit http://www.panasonic.com/phonehelp
Base Unit Settings
Temporary Confidential
Maintenance
Password:
This feature allows you to change the user name and password that are required to
access the base unit.
Important:
L Make a note of the user name and password so that you will not forget them.
Click [Advanced Setup] on Top Menu.
Configure the settings, then click [Save].
Click the [Maintenance] tab, then click [Password].
Setting
[User Name]
[Password]
[Retype
Password]
Description
L The user name and password can contain 6 to 15 characters
(including numbers).
L The following cannot be used: [ “ ], [ ‘ ], [&], [<], [>], [(space)]
L User name and password must be different from each other.
L User name and password are case-sensitive.
L Enter the password again to verify.
For assistance, please visit http://www.panasonic.com/phonehelp
131
Base Unit Settings
Temporary Confidential
Click [Restart].
Update Firmware:
This feature allows you to update the firmware to the latest version.
Click [Advanced Setup] on Top Menu.
Check for the latest version by clicking the support information URL.
Click the [Maintenance] tab, then click [Update Firmware].
If the version is updated, download the updated firmware to your PC.
Enter the file name under the “Update Firmware” heading.
L Click [Browse...] to select the desired file name from the list.
132
For assistance, please visit http://www.panasonic.com/phonehelp
6
Temporary Confidential
Base Unit Settings
Click [Update].
L The base unit automatically restarts after the firmware is updated.
Important:
L Do not interrupt the firmware updating process by cutting the power supply until the
updating is complete and the base unit restarts itself.
For assistance, please visit http://www.panasonic.com/phonehelp
133
Base Unit Settings
Temporary Confidential
Reset to Factory Default:
The base unit settings can be reset to the base unit’s factory default. See page 145 for the
default network settings.
Click [Advanced Setup] on Top Menu.
Click [Reset to Factory Default] to reset the base unit settings.
Click the [Maintenance] tab, then click [Reset to Factory Default].
Click [OK].
L The base unit begins to restart.
134
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Save Settings:
A backup file can be saved on your computer. You can load the base unit settings from the
backup file on “Load Settings” page (page 136).
Click [Advanced Setup] on Top Menu.
Click [Save].
Click the [Maintenance] tab, then click [Save Settings].
Specify the location and enter the file name, and click [Save] on the Save As dialog
box.
For assistance, please visit http://www.panasonic.com/phonehelp
135
Base Unit Settings
Temporary Confidential
Load Settings:
The base unit settings can be loaded from a backup file. If you reset the base unit settings
to factory default, the Load Settings page can load its settings from the backup file.
Note:
L The backup file has network settings. When the settings are loaded, the network
settings except for the user name and password are also changed as they were saved.
Click [Advanced Setup] on Top Menu.
Enter the file name or click [Browse...] then select the backup file on the Choose file
dialog box, and click [Open].
Click [Load].
Click the [Maintenance] tab, then click [Load Settings].
Click [Restart].
136
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Restart:
The Restart page can restart the base unit.
Click [Advanced Setup] on Top Menu.
Click [Restart].
Click the [Maintenance] tab, then click [Restart].
Click [OK].
For assistance, please visit http://www.panasonic.com/phonehelp
137
Base Unit Settings
Temporary Confidential
Packet Filtering Log:
This feature displays the packet filtering logs that are temporarily saved, and saves the
logs on your computer. This feature is enabled if [Log Output] in [Packet Filtering
Setting] (page 122) is set to on.
Click [Advanced Setup] on Top Menu.
Click [Save].
Click the [Maintenance] tab, then click [Packet Filtering Log].
L Packet filtering logs are displayed.
Specify the location and enter the file name, and click [Save] on the Save As dialog
box.
138
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
UPnP Port Mapping Log:
UPnP Port Mapping Log displays the temporarily saved logs of port mapping additions,
deletions and failures, and save the logs on your computer. This feature is enabled if
[UPnP] (page 119) is set to Enable.
Click [Advanced Setup] on Top Menu.
Click [Save].
Click the [Maintenance] tab, then click [UPnP Port Mapping Log].
L UPnP port mapping logs are displayed.
Specify the location and enter the file name, and click [Save] on the Save As dialog
box.
For assistance, please visit http://www.panasonic.com/phonehelp
139
Base Unit Settings
Temporary Confidential
Connection Log:
Connection Log displays the temporarily saved logs of connection, disconnection and
authentication during PPPoE or DHCP connection, and saves the logs on your computer.
Click [Advanced Setup] on Top Menu.
Click [Save].
Click the [Maintenance] tab, then click [Connection Log].
L Connection logs are displayed.
Specify the location and enter the file name, and click [Save] on the Save As dialog
box.
140
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Support
Help:
The Help page describes each feature of the following items:
1. Initialization Wizard
2. Network Connection
3. Update Firmware
4. Advanced Setup
5. Link for handset
6. Status
7. Basic
8. Advanced
9. Wireless
10. Maintenance
Click [Advanced Setup] on Top Menu.
Click [View].
Click the [Support] tab, then click [Help].
Click the desired item to view its help page.
Note:
L You can also view help by clicking [Help] on each setup page.
For assistance, please visit http://www.panasonic.com/phonehelp
141
Base Unit Settings
Temporary Confidential
Support Link:
Support Link allows you to get product and support information from the Internet.
Click [Advanced Setup] on Top Menu.
Click the URL for the desired information.
Click the [Support] tab, then click [Support Link].
142
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Link for handset
This feature displays the registered handset's status of wireless connection to the base
unit and the handset's MAC address and IP address when connected to the base unit.
Click [Link for hand-set] on Top Menu.
L The handset status is displayed when the registered handset is wirelessly connected
to the base unit.
Note:
L It may take a while to display the screen.
For assistance, please visit http://www.panasonic.com/phonehelp
143
Base Unit Settings
Temporary Confidential
Mode selector
Once you have set up the Initialization Wizard (page 27) in the base unit settings, you do
not need to log in the base unit each time. You only need to slide the Mode selector switch
to choose between “HOME” or “HOTEL” mode so that the base unit can connect to the
Internet in the connection mode that is pre-registered for either “HOME” or “HOTEL”
mode.
Mode selector
144
For assistance, please visit http://www.panasonic.com/phonehelp
Base Unit Settings
Temporary Confidential
Reset button
If you forget the user name and password, press and hold “FACTORY DEFAULT RESET”
button on the bottom of the base unit with a pointed object until all the indicators go out.
The network settings are reset to default (see below). If necessary, set the settings again.
FACTORY DEFAULT RESET
Default network settings
Internet Connection Type
Connection Mode
DHCP
MTU size
– PPPoE
1492 bytes
– DHCP
1500 bytes
– Static
1500 bytes
Wireless Connection Settings
Wireless Mode
802.11b/g
Network Name (SSID)
(Displayed on the included WLAN sticker)
Broadcast SSID
Enable
WEP key
(Displayed on the included WLAN sticker)
Network key for WPA-PSK/PSK2
(Displayed on the included WLAN sticker)
Security Mode
WPA2-PSK/WPA-PSK/WEP
WPA-PSK/WPA2-PSK Data Encryption TKIP+AES
MAC Address Filtering
Disable
For assistance, please visit http://www.panasonic.com/phonehelp
145
Base Unit Settings
Temporary Confidential
Advanced Setup
LAN
– IP Address
192.168.0.242
– Subnet Mask
255.255.255.0
DHCP Server
– DHCP Server
Enable
– Starting IP Address
192.168.0.100
– Number of Lease IP Address
5 (One of which is assigned to the
handset)
DMZ
– DMZ
Disable
– DMZ Host IP Address
(Blank)
UPnP
Enable
Packet Filtering
Unset
Easy Security
– Sends/Receives packets to/from IP
address
Deny
– Stateful Packet Inspection
Enable (Except Ident Packets)
– Attack Detection
Disable
Routing
– Static Routing
146
Unset
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Setting your computer
Obtaining an IP address automatically on your computer
When you cannot log in the base unit by using the computer connected to the Ethernet
(LAN) port on the base unit, check the setting of Local Area Connection of the computer.
It is necessary to obtain an IP address automatically from a DHCP server.
L You must be logged in as an administrator in order to set the Local Area Connection.
Click [Start], then click [Control Panel].
Select [Internet Protocol (TCP/IP)], then click [Properties].
Click [Network and Internet Connections], then click [Network Connections].
Right-click the Local Area Connection icon connected to the base unit, then select
[Properties].
For assistance, please visit http://www.panasonic.com/phonehelp
147
Base Unit Settings
Temporary Confidential
Select [Obtain an IP address automatically].
Click [OK].
Click [OK], then close the Network Connection window.
Setting the static IP address on your computer
When you log in the base unit with its firmware being defective, the firmware update
screen will be displayed. In this case, a static IP address needs to be set on your
computer.
Click [Start], then click [Control Panel].
Click [Network and Internet Connections], then click [Network Connections].
Right-click the Local Area Connection icon connected to the base unit, then select
[Properties].
148
For assistance, please visit http://www.panasonic.com/phonehelp
4
Temporary Confidential
Base Unit Settings
Select [Internet Protocol (TCP/IP)], then click [Properties].
Select [Use the following IP address].
For assistance, please visit http://www.panasonic.com/phonehelp
149
Base Unit Settings
Temporary Confidential
Enter the IP address.
L The IP address must be within the range of 192.168.0.1-192.168.0.254 except for
192.168.0.242 (the default IP address of the base unit on the LAN interface).
7 For Subnet mask, enter 255.255.255.0.
8 Click [OK].
9 Click [OK], then close the Network Connection window.
10 On the Web browser, enter http://192.168.0.242
11 Click [Advanced Setup] on Top Menu.
12 Click the [Maintenance] tab, and then click [Update Firmware].
13 Check for the latest version by clicking the support information URL.
14 If the version is updated, download the updated firmware to your computer.
15 Specify the file name.
You can also click [Browse...] to select the desired file name from the list.
16 Click [Update].
L The base unit automatically restarts after the firmware is updated.
Important:
L Do not interrupt the firmware updating process by cutting the power supply until the
progress indicator reaches 100% and the base unit restarts itself.
17 Confirm that WAN Indicator is not flashing in amber, then set your computer setting
back to the previous condition.
150
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Changing the proxy server settings on Web browser
If your Internet service provider uses the proxy server, you cannot log in the base unit.
Change the proxy server settings on your Web browser.
Open your Web browser. (The example is Internet Explorer 6.0.)
Click [Connections] tab, then click [LAN Settings…].
Click [Tools], then select [Internet Options...].
For assistance, please visit http://www.panasonic.com/phonehelp
151
Base Unit Settings
Temporary Confidential
See if the “Use a proxy server for your LAN” check box is checked or not.
N If checked, click [Advanced…] and go to step 5.
N If not checked, click [Cancel] then close the Internet Options window. Proxy server
settings are not required.
Enter the base unit’s IP address into the “Do not use proxy server for addresses
beginning with:” data field.
Click [OK].
Click [OK], then close the Internet Options window.
152
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Base Unit Settings
Setting UPnP to display the shortcut
To display the KX-WPA102 shortcut in the My Network Places folder, Windows component
should be added. Enable UPnP (Universal Plug and Play) following the steps below.
Click [Start], then click [Control Panel].
Select [Network Service], then click [Details…].
Click [Add or Remove Programs], then click [Add or Remove Windows
Components].
Check [Universal Plug and Play], then click [OK].
Click [Next>].
Note:
L If you are using Windows XP Service Pack 2, check [Internet Gateway Device
Discovery and Control Client] and [UPnP User Interface] in step 4.
Using your computer on a wireless LAN
The 15 character device-specific Network name (SSID), 13 alphanumeric character 128
bit encryption Network key (WEP) and 16 alphanumeric character Network key (WPAPSK/WPA2-PSK) are set as factory default. These factory default setting values are
displayed on the included WLAN sticker. If you use your computer on a wireless LAN, use
the values on the sticker to set the wireless LAN configuration of your computer. To set
your computer to be used on a wireless LAN, see the manual for the computer you use.
Note:
L To use your computer on a wireless LAN, a wireless LAN card needs to be installed on
your computer.
For assistance, please visit http://www.panasonic.com/phonehelp
153
Useful Information
Temporary Confidential
Additional accessories
Sales and support information
L To order additional accessories, call 1-800-332-5368.
L TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Headset (optional)
Connecting a headset to the handset allows hands-free phone conversations. We
recommend using the Panasonic headset shown below.
L The headset model numbers compatible with KX-WPA100 handset:
KX-TCA88HA
KX-TCA86
KX-TCA91
KX-TCA92
KX-TCA93
KX-TCA94
KX-TCA95
154
For assistance, please visit http://www.panasonic.com/phonehelp
Useful Information
Temporary Confidential
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Networks were not
found.
L Move closer to the base unit, or move to the Wi-Fi
coverage area of the hotspot.
L Press {Retry} to search for networks again.
L Press {Options}. i Select “Add manually” or
“Preferred networks”.
Could not connect
to 
L A network connection is failed.
L Press {OK} to search for networks again.
Your skype name and
password were not
recognized.
L The Skype name and password you enter are incorrect.
L Press {Retry} and enter the correct name and
password.
Sign in was not
successful.
L Check to see if your ISP is having network connection
issues in your area.
Network connection
lost.
L The handset has lost communication with the base unit
or hotspot.
L Move closer to the base unit, or move to the Wi-Fi
coverage area of the hotspot.
L Press {OK}. i Select “Find network”.
Please try again
later.
L An unexpected error has occurred.
L Press {OK} to return to Idle screen or the previous
screen.
Failed. Try again
later.
L Your authorization request has been failed.
L Press {OK} and try again.
Invalid password.
L Your password is not within 4 – 20 characters.
L Enter your password again.
The Handset could
not register.
Please try again.
L Press {OK}. i Press and hold the Handset locator on
the base unit for 3 seconds again.
For assistance, please visit http://www.panasonic.com/phonehelp
155
Useful Information
Temporary Confidential
FCC and other information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:
L This product complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
L To comply with FCC RF exposure requirements, the base unit must be installed and
operated 20 cm (8 inches) or more between the base unit and all person’s body
(excluding extremities of hands, wrist and feet).
L This product may not be collocated or operated in conjunction with any other antenna or
transmitter.
156
For assistance, please visit http://www.panasonic.com/help
Temporary Confidential
Useful Information
L For body-worn operation, the handset must be used only with a non-metallic accessory.
Use of other accessories may not ensure compliance with FCC RF exposure
requirements.
Responsible party:
Panasonic Corporation of North America
One Panasonic Way,
Secaucus, New Jersey 07094
Phone number: 1-800-211-PANA (1-800-211-7262)
FCC Warning:
To ensure compliance with FCC emissions limits, use only the included charge cable
with the ferrite core when connecting the handset to the base unit.
For assistance, please visit http://www.panasonic.com/help
157
Useful Information
Temporary Confidential
Industry Canada (IC) and other information
The term “IC:” before the radio certification number only signifies that Industry Canada
radio technical specifications were met.
Notice:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
RF Exposure Warning:
L This product complies with IC radiation exposure limits set forth for an uncontrolled
environment.
L To comply with IC RF exposure requirements, the base unit must be installed and
operated 20 cm (8 inches) or more between the base unit and all person's body
(excluding extremities of hands, wrist and feet).
L This product may not be collocated or operated in conjunction with any other antenna or
transmitter.
L For body-worn operation, the handset must be used only with a non-metallic accessory.
Use of other accessories may not ensure compliance with IC RF exposure
requirements.
Environment:
Do not install the unit where the temperature is less than 0 °C (+32 °F) or greater than +40
°C (+104 °F). Allow 10 cm (4 inches) clearance around the unit for proper ventilation.
Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When
you leave the unit unused for a long period of time, disconnect the AC adaptor from the
outlet.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
No responsibility will be taken by our company with respect to consequences resulting
from the inappropriate use, damage or both of the unit.
158
For assistance, please visit http://www.panasonic.com/help
Temporary Confidential
Useful Information
Règles d’Industrie Canada et autres renseignements
L’acronyme « IC » placé devant le numéro d’homologation indique seulement que
l’appareil satisfait aux spécifications de Industrie Canada.
Avis:
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
Avertissement de risque d’exposition au rayonnement radiofréquence:
Ce produit est conforme aux normes d’Industrie Canada concernant les limites
d’exposition au rayonnement radiofréquence en milieu non contrôlé. Pour assurer la
conformité aux exigences de IC quant à l’exposition au rayonnement RF, l’appareil doit
être installé et opéré de manière que son appareil soit à une distance d’au moins 20 cm
(8 pouces) de toute personne (à l’exclusion des extrémités des mains, des poignets et des
pieds). L’appareil ne doit être installé ni opéré de concert avec aucune autre antenne ni
aucun autre émetteur.
Conditions ambiantes:
Ne pas installer l’appareil dans un endroit où la température est inférieure à 0 °C (+32 °F)
ou supérieure à +40 °C (+104 °F).
Prévoir un jeu d’au moins 10 cm (4 po) autour de l’appareil en vue d’assurer une aération
adéquate. Éviter l’exposition à la fumée, la poussière, la vibration, les chocs et aux rayons
solaires directs.
Entretien de routine:
Essuyer l’appareil avec un linge doux. Ne jamais utiliser de benzène, solvant ou toute
poudre abrasive.
S’il est prévu que l’appareil ne sera pas utilisé pendant une période prolongée,
débrancher l’adaptateur secteur.
MISE EN GARDE:
Toute modification non expressément approuvée par la partie responsable de la
conformité de l’appareil pourrait entraîner la révocation du privilège d’utiliser l’appareil.
Notre compagnie n’assume aucune responsabilité quant aux conséquences résultant
de l’utilisation de l’appareil ou de tout dommage subi par l’appareil.
For assistance, please visit http://www.panasonic.com/phonehelp
159
Useful Information
Temporary Confidential
For European Union (EU)
Declaration of Conformity:
Panasonic Communications Co., Ltd. declares that this equipment is in compliance with
the essential requirements and other relevant provisions of Radio & Telecommunications
Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual
are available for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe
a Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Important Safety Information:
Use only the included Panasonic AC adaptor (model no.PQWEWP1050).
English
This 2.4 GHz Wireless LAN equipment is intended for use in the following
countries in the EU: the United Kingdom, Germany, and France.
French
Cet équipement LAN sans fil de 2,4 GHz a été conçu pour être utilisé dans
les pays suivants de l’Union Européenne: Royaume-Uni, Allemagne, et
France.
German
Dieses Zubehör für die Einrichtung eines 2,4-GHz-Wireless LAN ist für die
Verwendung in folgenden EU-Ländern vorgesehen: Großbritannien (UK),
Deutschland, und Frankreich.
160
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Useful Information
Information on Disposal for Users of Waste Electrical & Electronic
Equipment (private households)
This symbol on the products and/or accompanying documents means that
used electrical and electronic products should not be mixed with general
household waste.
For proper treatment, recovery and recycling, please take these products to
designated collection points, where they will be accepted on a free of charge
basis. Alternatively, in some countries you may be able to return your
products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling. Please contact your local authority for further
details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask
for the correct method of disposal.
For assistance, please visit http://www.panasonic.com/phonehelp
161
Useful Information
Temporary Confidential
Specifications
Base unit:
Router feature
AP (Bridge) feature
Network Interface
feature
Wireless feature
162
WAN connection mode:
DHCP, PPPoE, Static
DHCP server:
Yes (max. 5 clients, including 1
for handset)
DNS relay (DNS Proxy):
Yes
IP packet filtering:
Yes (max. 20)
UPnP:
Internet Gateway Device (IGD)
Address translation:
IP masquerade, port forwarding
(max. 10), DMZ
Connection mode:
DHCP, Static
UPnP:
Basic Device
WAN:
10Base-T/100Base-TX Ethernet
RJ-45 connector x 1
LAN:
10Base-T/100Base-TX Ethernet
RJ-45 connector x 1
Wireless:
IEEE 802.11b, IEEE 802.11b/g
Transmission speed*1:
IEEE 802.11b: 11/5.5/2/1 Mbps
IEEE 802.11g: 54/48/36/24/18/
12/9/6 Mbps
Data transfer mode:
IEEE 802.11b: Direct Sequence
Spectrum Spread (DS-SS),
IEEE 802.11g: Orthogonal
Frequency Division Multiplexing
(OFDM)
Frequency range:
2.412 – 2.462 GHz (center
frequency)
Number of channels:
11 channels (1–11)
Security:
SSID, WEP(64/128 bit), WPAPSK (TKIP, AES), WPA2-PSK
(TKIP, AES), Broadcast SSID,
MAC address filtering
For assistance, please visit http://www.panasonic.com/help
Useful Information
Temporary Confidential
Other feature
Indicators:
WAN, LAN, WIRELESS,
LOCATOR
Buttons:
LOCATOR, FACTORY
DEFAULT RESET, Mode
selector
Dimension (HWD):
Approx. 33 mm x 148 mm x
51 mm (11/4 inches x 57/8 inches
x 2 inches)
Mass (Weight):
Approx. 150 g (0.33 lb.)
Power consumption:
Standby: Approx. (TBD) W
Maximum: Approx. (TBD) W
Power output:
30 mW
Power supply:
AC adaptor:
Input: 100–240 V AC, 50–60 Hz
Output: 6 V DC, 1.5A
Operating environment
temperature:
0 °C – 40 °C (32 °F – 104 °F)
*1 The figures shown are theoretical maximums and not the actual figures when using the
product.
Handset:
Skype feature
Calls:
Skype-to-Skype calls
SkypeIn calls
SkypeOut calls
Conference calls (guest only)
Call waiting
Skype Voicemail:
Yes
Contacts list:
Yes (max. 500)
History:
Incoming calls (max. 20)
Outgoing calls (max. 20)
Missed calls (max. 50)
Voicemails (max. 100)
Authorizations (max. 20)
For assistance, please visit http://www.panasonic.com/help
163
Useful Information
Temporary Confidential
Network feature
Connection mode:
DHCP, Static
Preferred networks:
Yes (max. 21, including 1 for
base unit)
Network Interface
feature
Wireless:
IEEE 802.11b/g
Wireless feature
Transmission speed*1:
11/5.5/2/1 Mbps
Data transfer mode:
Direct Sequence Spectrum
Spread (DS-SS)
Frequency range:
2.412 – 2.462 GHz (center
frequency)
Number of channels:
11 channels (1–11)
Security:
SSID, WEP (64/128 bit), WPAPSK (TKIP), WPA2-PSK (AES)
Indicators:
Charge/Ringer
Display:
1.8 inch TFT LCD, 65k colors
Dimension (HWD):
Approx. 142 mm x 45 mm x 20
mm (55/8 inches x 13/4 inches x
3/ inch)
Mass (Weight):
Approx. 100 g (0.22 lb.)
Power consumption:
Standby: Approx. (TBD) W
Maximum: Approx. (TBD) W
Power output:
30 mW
Power supply:
Li-Ion battery (3.6 V, 730 mAh)
Operating environment
temperature:
0 °C – 40 °C (32 °F – 104 °F)
Other feature
*1 The figures shown are theoretical maximums and not the actual figures when using the
product.
Note:
L Design and specifications are subject to change without notice.
L The illustrations in these instructions may vary slightly from the actual product.
164
For assistance, please visit http://www.panasonic.com/help
Temporary Confidential
Useful Information
Customer services
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or
Servicenter; purchase Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal
Checks)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
For assistance, please visit http://www.panasonic.com/phonehelp
165
Index
Temporary Confidential
Index
A Answering calls: 70
AP Configuration: 41
Authentication: 127
Auto sign in: 85
B Base unit
Setting: 27
Battery
Charge: 45
Installation: 44
Level: 46
Performance: 46
Replacement: 44
C Call forwarding: 71
Call History: 68, 77
Call Waiting: 75
Character table: 49
Conference: 75
Contacts list: 68
D Default network settings: 145
DHCP Configuration: 38
DHCP Lease Table: 107
DMZ: 118
DNS Server: 37, 38, 40
DTMF: 76
E Encryption: 127
Error messages: 155
H Handset registration: 93
Handset Status: 109
Headset, optional: 154
Help: 142
Hold: 75
I Idle screen: 54
Initialization Wizard: 29
Internet connection: 36, 111
IP Address: 39, 41
L LAN / DHCP Server: 113
Load Settings: 136
166
Log
Connection: 140
Packet Filtering: 138
UPnP Port Mapping: 139
MAC Address Clone: 112
MAC Address Filtering: 129
Main menu: 57
Making calls: 68
Mute: 75
Network: 83
Network Connection: 97
Network Status: 106
Packet Filtering: 120
Password: 29, 81, 131
PIN code: 89
Port Forwarding: 116
Power screen: 59
PPPoE Configuration: 36
Reset: 87, 134
Reset button: 145
Ringer off: 70
Routing: 124
Short cut keys: 16
Skype credit: 92
SkypeIn: 92
SkypeOut: 63, 69
Software updates: 85, 86
Speakerphone: 69
Static Configuration: 39
Status icons: 55
Status indicators: 47
Subnet Mask: 39, 41
Support: 141
System requirements: 19
Time and Date: 60
Tones: 88
Top Menu: 95
Troubleshooting for installation: 42
TTY: 13, 154, 165
Update Firmware: 101, 132
For assistance, please visit http://www.panasonic.com/phonehelp
Temporary Confidential
Index
UPnP: 119
UPnP Port Mapping Table: 108
User name: 29
V Version Information: 109
Voicemail: 72
Volume
Receiver: 69
Ringer: 70
Speaker: 69
W Wireless: 126
Wireless Status: 108
For assistance, please visit http://www.panasonic.com/phonehelp
167
IfTemporary
you need
assistance with setup or operation
Confidential
Visit our website: http://www.panasonic.com/phonehelp
Contact us via the web at: http://www.panasonic.com/contactinfo
Call us at: 1-800-211-PANA (1-800-211-7262)
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom, to the outside of the carton.
L Send the unit to Panasonic Services Company Customer Servicenter, prepaid and
adequately insured.
L Do not send your unit to Panasonic Consumer Electronics Company listed below or to
executive or regional sales offices. These locations do not repair consumer products.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is prohibited
without the written consent of Panasonic Communications Co., Ltd.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15539ZA-CD DJ1006SK0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2006:09:15 18:33:21
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2006:09:15 18:33:21+09:00
Page Count                      : 168

EXIF Metadata provided by EXIF.tools