Panasonic of North America 9TGCF-295A Panasonic Toughbook w/ WLAN, GPRS & Bluetooth User Manual Operating Instructions

Panasonic Corporation of North America Panasonic Toughbook w/ WLAN, GPRS & Bluetooth Operating Instructions

UserManual.wiki >

Panasonic of North America >

9TGCF-295A User Manual >

Contents

1. Users Manual 1
2. Users Manual 2
3. Supplemental Users Manual for EGPRS
4. Supplemental Users Manual for Bluetooth

Users Manual 1

Personal ComputerAppendixLIMITED USE LICENSE AGREEMENT .......... 35Hard Disk Backup Function ............................. 37Hard Disk Data Erase Utility ............................ 41Specifications ................................................... 42LIMITED WARRANTY ..................................... 44TroubleshootingList of Error Codes ........................................ 25Dealing with Problems (Summary) ....................... 26Reinstalling Software .................................... 33OperationStarting Up/Shutting Down............................ 16Touch Pad (Basic Operation) ........................ 19Reference Manual ......................................... 20Useful Information ......................................... 21Getting StartedRead Me First ................................................. 3Names and Functions of Parts ........................ 9First-time Operation ...................................... 11Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer.Refer to page 20 on how to access the Reference Manual.Reference Manual•Read Me First•Key CombinationsReference Manual•Touch Pad•Touchscreen*1•Panasonic Hand Writing•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•Multimedia Pocket•PC Cards•RAM Module•Port Replicator•External Display•Printer•USB Devices•Modem•LAN•Wireless LAN*2•Hard Disk Drive•Setup Utility•Icon Enlarger•Loupe UtilityReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)Appendix Getting StartedOperationTroubleshootingModel No. CF-29 SeriesPlease read these instructions carefully before using this product and save this manual for future use.XP•LED Indicators*1Only for models with touchscreen*2Only for models with wireless LANOPERATING INSTRUCTIONS

3Getting StartedRead Me FirstFederal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also, anychanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate this equipment.FCC RF Exposure Warning:This equipment is provided with PC Card slot that could beused with wireless transmitters, which will be specificallyrecommended when they become available.Other third-party wireless transmitters have not been RF ex-posure evaluated for use with this computer and may not com-ply with FCC RF exposure requirements.<Only for models with wireless LAN>This equipment complies with FCC radiation exposure lim-its set forth for an uncontrolled environment.This equipment has been approved for mobile operation, andunless otherwise advised in separate supplemental instruc-tions for individual wireless transmitter(s), requires minimum20 cm spacing be provided between antenna(s) and allperson’s body (excluding extremities of hands, wrist and feet)during wireless modes of operation.This equipment may use multiple installed transmitters, whichmay be capable of simultaneous transmission.This equipment is provided with external antenna connector(s)for connection to optional Car Mounter or Port Replicator formobile external mounted antenna(s). External antenna(s) mustbe professionally installed and cannot exceed recommendedmaximum antenna gain as described in individual providedsupplement instructions for wireless transmitters. Also, usermust maintain minimum 20 cm spacing between externalantenna(s) and all person’s body (excluding extremities ofhands, wrist and feet) during wireless modes of operation.<Only for models with wireless LAN>This product is restricted to indoor use due to its operation inthe 5.15 to 5.25 GHz frequency range.FCC requires this product to be used indoors for the frequencyrange 5.15 to 5.25 GHz to reduce the potential for harmful in-terference to co-channel Mobile Satellite systems.High power radars are allocated as primary users of the 5.25 to5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations cancause interference with and /or damage this product.For U.S.A.1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs on thetelephone line may result in the devices not ringing in responseto an incoming call. In most, but not all area, the sum of RENsshould not exceed five (5.0). To be certain of the number ofdevices that may be connected to a line, as determined by thetotal RENs, contact the local telephone company.4. If your telephone equipment cause harm to the telephonenetwork, the telephone company will notify you in advicethat temporary discontinuance of service may be required.But if advice notice isn’t practical, the telephone companywill notify the customer as soon as possible. Also, you willbe advised of your right to file a complaint with the FCC ifyou believe it is necessary.5. The telephone company may take changes in it’s facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Panasonic Corporationof North America at DIAL TOLL FREE 1-800-LAPTOP5(1-800-527-8675). If the equipment is causing harm to thetelephone network, the telephone company may request thatyou disconnect the equipment until the problem is resolved.7. There are no user serviceable parts contained in this equip-ment.8. This equipment may not be used on coin service providedby the telephone company. Connection to party lines is sub-ject to state tariffs.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.Manufacturer of modem: AMBIT Microsystems CorporationModel No. T60M283.** (** = numbers or alphabet letters)FOR HOME OR OFFICE USETested To ComplyWith FCC StandardsThis device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Panasonic Corporation of North AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP5 (1-800-527-8675)

4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that itis permissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. Thecustomer should be aware that compliance with the aboveconditions may not prevent degradation of service in somesituations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that the electricalground connections of the power utility, telephone lines andinternal metallic water pipe system, if present, are connectedtogether. This precaution may be particularly important inrural areas. Caution: Users should not attempt to make suchconnections themselves, but should contact the appropriateelectric inspection authority, or electrician, as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerRESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigences tech-niques relatives au matériel terminal. Le Ministère n’assuretoutefois pas que le matériel fonctionnera à la satisfactionde l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entrepriselocale de télécommunication. Le matériel doit égalementêtre installé en suivant une méthode acceptée deraccordement. L’abonné ne doit pas oublier qu’il est pos-sible que la conformité aux conditions énoncées ci-dessusn’empêche pas la dégradation du service dans certaines situ-ations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer quetous les fils de mise à la terre de la source d’énergieélectrique, des lignes téléphoniques et des canalisationsd’eau métalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter defaire ces raccordements lui-même; il doit avoir recours à unservice d’inspection des installations électriques, ou à unélectricien, selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule condi-tion que la somme d’indices d’équivalence de la sonneriede touts les dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateurNotice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations. For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>UL1604-conforming model. (The model which has de-scription of “UL1604” in the bottom of the computer.)• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-ARDOUS LOCATIONS ONLY.• WARNING – EXPLOSION HAZARD – SUBSTITUTIONOF COMPONENTS MAY IMPAIR SUITABILITY FORCLASS I, DIVISION 2.• When connecting and using a device manufactured by a thirdparty, enquire to the manufacturer as to whether the devicesuits CLASS I, DIVISION 2.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machine orsuch business, other entity, or individual. In order to programthis information into your fax software, you should refer tothe manual of the Fax software being used.10.According to the FCC’s electrical safety advisory, we rec-ommend that you may install an AC surge arrestor in the ACoutlet to which this equipment is connected. Telephone com-panies report that electrical surges, typically lightning tran-sients, are very destructive to customer terminal equipmentconnected to AC power sources and that this is a major na-tionwide problem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger tele-communication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”

5Getting StartedCSA C22 2 NO.213-conforming model. (The modelwhich has description of “CSA C22 2 NO.213” in thebottom of the computer.)• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-ARDOUS LOCATIONS ONLY.• WARNING – EXPLOSION HAZARD – SUBSTITUTIONOF COMPONENTS MAY IMPAIR SUITABILITY FORCLASS I, DIVISION 2.• When connecting and using a device manufactured by a thirdparty, enquire to the manufacturer as to whether the devicesuits CLASS I, DIVISION 2.Declaration of Conformity (DoC)“Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliancewith the essential requirements and other relevant provisions of the Directive 1999/5/EC.”Hint:If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to ourweb address: http://doc.panasonic-tc.deNetwork connection.The terminal equipment is intended for connection to the following public network;In all the countries of European Economical Area;- Public Switched Telephony NetworksTechnical Features.The terminal equipment includes the following features;- DTMF dialing- Maximum bitrate receiving mode: 56 kbits/s- Maximum bitrate sending mode: 33.6 kbit/sThis product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Sweden,Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway andAustria.--------------------------------------------------------------------------------------------------------------------------------------------Compliance Notice - CE MarkThis equipment is in conformance with the requirements of the European Council Directive listed below:73/23/EEC Low Voltage Directive with amendment 93/68/EEC89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC1999/5/EC--------------------------------------------------------------------------------------------------------------------------------------------For Europe<Only for models with wireless LAN/GPS>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.<Only for models with wireless LAN>This product (local network devices) for the band 5150-5250MHz is only for indoor usage to reduce potential for harmfulinterference to co-channel Mobile Satellite systems.High power radars are allocated as primary users (meaning theyhave priority) of 5250-5350 MHz and 5650-5850 MHz and theseradars could cause interference and/or damage to LELAN de-vices.(For models with a “CE” mark on the bottom of the computer)

6Getting StartedRead Me FirstImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety precau-tions should always be followed to reduce the risk of fire,electric shock and injury to persons, including the follow-ing:1.Do not use this product near water, for example, near abath tub, wash bowl, kitchen sink or laundry tub, in a wetbasement or near a swimming pool.2.Avoid using a telephone (other than a cordless type) dur-ing an electrical storm. There may be a remote risk of elec-tric shock from lightning.3.Do not use the telephone to report a gas leak in the vicin-ity of the leak.4.Use only the power cord and batteries indicated in thismanual. Do not dispose of batteries in a fire. They mayexplode. Check with local codes for possible special dis-posal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendantl'utilisation de matérial téléphonique afin de réduire lesrisques d'incendie, de choc électrique et de blessures. Envoici quelquesunes:1.Ne pas utiliser l'appareil près de l'eau, p.ex., près d'unebaignoire, d'un lavabo, d'un évier de cuisine, d'un bac àlaver, dans un sous-sol humide ou près d'une piscine.2.Éviter d'utiliser le téléphone (sauf s'il s'agit d'un appareilsans fil) pendant un orage électrique. Ceci peut présenterun risque de choc électrique causé par la foudre.3.Ne pas utiliser l'appareil téléphonique pour signaler unefuite de gaz s'il est situé près de la fuite.4.Utiliser seulement le cordon d'alimentation et le type depiles indiqués dans ce manual. Ne pas jeter les piles dansle feu: elles peuvent exploser. Se conformer aux règlementspertinents quant à l'élimination des piles.CONSERVER CES INSTRUCTIONS<Only for models with wireless LAN>This product and your HealthThis product, like other radio devices, emits radio frequency elec-tromagnetic energy. The level of energy emitted by this producthowever is far much less than the electromagnetic energy emit-ted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in ra-dio frequency safety standards and recommendations, we believethis product is safe for use by consumers. These standards andrecommendations reflect the consensus of the scientific commu-nity and result from deliberations of panels and committees ofscientists who continually review and interpret the extensive re-search literature.In some situations or environments, the use of this product maybe restricted by the proprietor of the building or responsible rep-resentatives of the organization. These situations may for exampleinclude:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wire-less devices in a specific organization or environment (e.g. air-ports), you are encouraged to ask for authorization to use thisproduct prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interferencecaused by unauthorized modification of this product. The cor-rection of interference caused by such unauthorized modifica-tion will be the responsibility of the user. We and its authorizedresellers or distributors are not liable for damage or violation ofgovernment regulations that may arise from failing to complywith these guidelines.Information to the UserLithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données comme la date et l'heurenotamment. Elle ne devra être remplacée que par un technicienqualifié.Avertissement! Risque d'explosion en cas de non respect de cettemise en garde!Lithium Battery

7Getting StartedCare should be exercised with regard to the following in or-der to avoid the possibility of overheating, fire or damage.Avoid HeatDo not throw the battery pack into a fire or ex-pose it to excessive heat.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disassemble,or modify it.Do Not ShortDo not short the positive (+) and negative (-) con-tacts.Do Not Put into a MicrowaveDo not put the battery pack into a microwave ovenor a pressurized chamber.Avoid Extreme Heat, Cold and Direct SunlightDo not charge, use or leave the battery pack for ex-tended periods where it will be exposed to directsunlight, in a hot place (in an automobile on a sunnyday, for example), or in a cold place.Keep Articles AwayDo not place the battery pack together with articlessuch as necklaces or hairpins when carrying or stor-ing.Stop UsingShould the battery emit an abnormal odor, becomehot to the touch, become discolored, change shape,or become in any way different from normal, removeit from the computer or charger and stop using it.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was intendedfor the specified computer or charger. Do not use itwith a computer other than the one for which it wasdesigned.Do not touch the terminals on the battery pack. The batterypack may no longer function properly if the contacts are dirtyor damaged.Do not expose the battery pack to water, or allow it to becomewet.Avoid Radio Frequency InterferenceDo not place the computer near a television orradio receiver.PrecautionsThe CF-29 was developed based on thorough research into thereal-world portable computing environments. Exhaustive pursuitof usability and reliability under harsh conditions led to innova-tions such has the magnesium alloy exterior, vibration dampedhard disk drive and floppy disk drive, flexible internal connec-tions. The CF-29’s outstanding engineering has been tested us-ing the strict MIL-STD- 810F (for vibration and shock) and IP(for dust and water) based procedures.As with any portable computer device precautions should be takento avoid any damage. The following usage and handling proce-dures are recommended.Avoiding Low-temperature BurnsAvoid more than casual contact with any heat pro-ducing area of the notebook computer, AC adap-tor, and any option or accessory you use with it.Even low heat, if warmer than body temperature,can cause a burn, if the skin is exposed to the heatsource for a long period of time.Avoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Keep Small Objects AwayDo not insert paper clips or other small objectsinto the computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to the rearof the computer.Before putting the computer away, be sure to wipe off any moisture.Precautions (Battery Pack)Do not touch the computer and cable when itstarts thunderingDo not use this computer with a battery packother than the one specified (the one includedwith the computer or the specified battery packsold separately)Do not connect a telephone line, or a networkcable other than the one specified, into theLAN portIf the LAN port is connected to a network such asthe ones listed below, a fire or electric shock mayresult.•Networks other than 100BASE-TX or 10BASE-T• Telephone lines• Internal phone lines (on-premise switches)• Digital public phones• Phone lines other than those listed above

8Getting StartedNOTEThe battery pack may become warm during recharging ornormal use. This is completely normal.Recharging will not commence if internal temperature ofthe battery pack is outside of the allowable temperaturerange (0 °C to 50 °C {32°F to 122 °F}). ( “Bat-tery Power”) Once the allowable range requirement issatisfied, charging begins automatically. Note that therecharging time varies based on the usage conditions. (Re-charging takes longer than usual when the temperature is10 °C {50 °F} or below.)If the temperature is low, the operating time is shortened.Only use the computer within the allowable temperaturerange.This computer has a high temperature mode function thatprevents the degradation of the battery in high tempera-ture environments. ( “Battery Power”) A levelcorresponding to a 100% charge for high temperature isapproximately equivalent to an 80% charge level for nor-mal temperature mode.The battery pack is a consumable item. If the amount oftime the computer can be run by using a particular batterypack becomes dramatically shorter and repeated recharg-ing do not restore its performance, the battery pack shouldbe replaced with a new one.When transporting a spare battery inside a package, brief-case, etc., it is recommended that it be placed in a plasticbag so that its contacts are protected.Always power off the computer when it is not in use. Leav-ing the computer on when the AC adaptor is not connectedwill exhaust the remaining battery capacity.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased. Be sure to charge it before using it for the firsttime. When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes. Immediately flush your eyes with clear water andsee a doctor for medical treatment as soon as possible.Precautions (Battery Pack)Read Me First

9Getting StartedNames and Functions of Parts( “LED Indicators”)( page 19)The illustrations shown may differ from the actual physical appearances.LED Indicators( “LED Indicators”)(Only for models with touchscreen: “Touchscreen”)For information on the key combinations avail-able ( “Key Combinations”).Power SwitchFor enhanced portability andin-the-field efficiency.Caps lockNumeric key lock (NumLk)Scroll lock (ScrLk)Multimedia pocket device statusHard disk drive statusPower status of the multimedia pocket Battery pack statusPower statusCarrying HandleTouch PadFunction Keys( “USB Devices”)Depending on the shape of the plug, some USBdevices cannot be connected to the USB port. Inthis case, use a commercially-available USB ex-tension cable.( “LAN”)( “Modem”)LAN( “Hard Disk Drive”)Hard Disk DriveLED Indicators( “Multimedia Pocket”)USB PortKeyboard( “Wireless LAN”)Wireless LAN AntennaCAUTIONDo not connect the modem telephonecable into the LAN port.DC IN 15.6VDC-IN Jack( “Battery Power”)Battery PackMultimedia Pocket (Floppy Disk Drive)A lithium ion battery thatis recyclable powers theproduct you have pur-chased. Please call 1-800-8-BATTERY for in-formation on how to re-cycle this battery.L’appareil que vous vousêtes procuré est alimentépar une batterie aulithium-ion. Pour desrenseignements sur lerecyclage de la batterie,veuillez composer le 1-800-8-BATTERY.Modem( “PC Cards”)PC Card SlotsPOWERHDDLCDCAUTIONDo not allow metallic objects ormagnetic media to come in closeproximity to this area.<Only for models with wireless LAN>

10Getting StartedSerial PortExpansion Bus Connector( “Port Replicator”)( “External Display”)Use this connector to connectheadphones or amplifier-equipped speakers. Audio outputfrom the internal speaker is dis-abled when headphones or exter-nal speakers are connected.Headphone Jack( “RAM Module”)SpeakerTo adjust the volume: Fn + F5 / Fn + F6Speaker on/off : Fn + F4RAM Module SlotSecurity LockA Kensington cable can be connected to prevent theft of your com-puter.For more information, read the manual that comes with the cable.LOCKExternal Display PortExternal Antenna ConnectorParallel PortNOTEWhen using an external microphone, do not remove the checkmark for “Mute” under “Microphone Balance” of the VolumeControl dialog box and do not increase the playback volume.Howling may result. Howling may occur in the same way whendisconnecting an external microphone. (The microphone of“Volume Control” is in the state of mute at the time of factoryshipment. This is not shown at the time of factory shipment.)Use only a monaural condenser microphone (miniature jack). Usingan input source other than a monaural condenser microphone maynot allow audio to be input or may damage the equipment.Microphone JackThe external antenna connector is for use as an exten-sion in the future.CAUTIONFCC RF Exposure Warning:The optional Car Mounter may be configured tohave 1 or 2 matching unique antenna passive pass-thru connectors, which would be hard-wired con-nected to its rear panel’s 1 or 2 external TNCantenna connectors.Depending upon exact computer configuration,the wireless LAN external antenna connectorshould be connected to recommended Radiall/Larsen wireless LAN antenna, typeMS3E2400TNC with 3 dBi antenna gain.The other antenna connector is intended for li-censed radio service external antenna and mustbe professionally installed.Supplemental instructions will be provided forany employed licensed radio service and willprovided external antenna recommended maxi-mum antenna dBi gain.CAUTIONDo not allow metallic objects or magnetic mediato come in close proximity to the speaker on thebottom surface of the computer.• Because the speaker contains a magnet, metalobjects may become attached to the bottomsurface of the computer. This may cause thecomputer to be unstable, or may mark the sur-face of the desk on which it is sitting.• If floppy disks, magnetic memory cards, or othermagnetic media approach the speaker, there isa risk that data will be destroyed.Names and Functions of PartsCAUTIONDo not cover the computer with a thick cloth, such as a blan-ket.( “USB Devices”)Depending on the shape of the plug, some USB devicescannot be connected to the USB port. In this case, use acommercially-available USB extension cable.USB Port<Only for models with wireless LAN>

11Getting Started2Read the LIMITED USE LICENSE AGREEMENT. ( page 35)Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the sealon the computer’s packaging.3Insert the battery pack.1Unlock the cover by sliding the latch to the right.First-time OperationRead the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all parts.Make sure the parts shown in the figure have been supplied. If any of these items aremissing or are not working properly, contact Panasonic Technical Support.Model No : CF-AA1653AModel No : CF-VZSU29Operating Instructions (This book)*1.......................................................... 1Windows® Book ...................................................................................... 1Product Recovery CD-ROM ................................................................... 3( “Touchscreen”)Soft Cloth .................................. 1 Stylus ..................................... 1<Only for models with touchscreen>Battery Pack .............................. 1 Modem Telephone Cable .......... 1AC Adaptor................................ 1 AC Cord ..................................... 1LatchCover*1If additional instructions are included with the computer, be sure to read them. It may be neces-sary to perform additional operations during the following procedures.2Slide the latch down, and then without releasing it, open the cover as illustrated.

12Getting StartedFirst-time Operation6Turn your computer on.Slide the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.Do not slide the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not slide the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.4Connect your computer to a power outlet.Be sure the AC adaptor is connected until completing the first-time use opera-tion.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunder andlightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless the battery pack is installed.Power Indicator CAUTIONCAUTION5Open the display.1Pull the carrying handle forward.2Press the latch as illustrated.3Lift up the latch and open the display.CAUTIONDo not touch the terminals on the battery pack and the computer. The batterypack may no longer function properly if the contacts are dirty or damaged.Also, the computer may not operate properly.Be sure to insert the battery pack as illustrated.3Slide the battery pack inward until it is firmly in place.4Close the cover until it clicks into place.5Lock the cover by sliding the latch to the left.CAUTIONConfirm that the latch lock is correctly in place. If you carry your computerwithout the latch lock in place, the battery pack may fall out.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 7-8).DC-IN JackDC IN 15.6 VDC PlugPower Switch 34123LatchPOWER5

13Getting Started7Setup Windows.Moving the cursor ( ) or clicking buttons can be performed with the touch pad.The touchscreen does not work properly during the Windows setup.NOTESelect settings for your region, then select [Next].4Enter your name and organization and then select [Next].5Enter your computer name and administrator password and then select [Next].Do not press any keys or touch the touch pad until [Windows XP ProfessionalSetup] is displayed.CAUTION1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].NOTEIf [I don’t accept this agreement] is selected, the Windows setup will be aborted.3CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].The computer will restart.7Enter your administrator password and select .Wait until the hard disk drive indicator ( ) has turned off.NOTE8<Only for models with touchscreen>Calibrate the touchscreen.1Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -[TouchScreen] - [Calibration].2Touch the “+” mark on the calibration screen with the stylus (included) for about onesecond.3After the calibration procedure is executed (e.g., after the nine “+” marks are touched),the procedure ends when Enter is pressed.4Select [OK].It may take some time before the computer restarts and the screen of step 7 isdisplayed. Wait, and do not press any keys, or touch the touch pad, etc.NOTEWhen Windows setup is completed, the following message will be displayed atthe bottom right of the screen: “Your computer might be at risk.” Continue tothe next step.The message is generated by the [Security Center] function in [Control Panel],and does not indicate an error or malfunction. For more information about [Se-curity Center]: page 22.

14Getting StartedThis concludes the first-time use operation guidelines.9Create a new account.CAUTIONRemember this password! If the password is forgotten, Windows cannot be oper-ated. You can create a password reset disk beforehand ( page 15).When creating a new user account:• If you make mail settings, create password reset disks ( page 15), or conduct otherrelated operations before creating the user account, you will be unable to use any pre-vious mail history or settings.• When you create the first new account, you can only select [Computer administrator].Once a “Computer Administrator” account has been created, you can create additionallimited user accounts.Note also that only the added user account will be displayed in the Welcome screen.The account for the administrator created during Windows setup will not be displayed.The message “Your computer might be at risk,” which is displayed at the bottom right ofthe screen, is generated by the “Security Center” function in Windows XP, and does notindicate an error or malfunction.To prevent this message from being displayed, select (red icon) on the taskbar, thenselect [Turn on Automatic Updates].About the Icon Enlarger:• If the characters or icons on the screen are too small and difficult to see, after complet-ing step 9, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. This willallow you to magnify the display of characters and icons on the screen.• The [Icon Enlarger] can be set separately for each account.You can also use [Loupe Utility], which enlarges a part of the screen.( “LoupeUtility”)<Only for models with wireless LAN>If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.NOTEFirst-time Operation1Select [start] - [Control Panel] - [User Accounts] - [Create a new account].2Enter a name for the new account, then select [Next].3Select [Computer administrator], then select [Create Account].4<When you want to create a password for the new account>Select the new account you have created and select [Create a password].Follow the instructions on the screen to create a password.5Select [start] - [Turn Off Computer] - [Restart] to restart the computer.

15Getting StartedInformation for Windows XPDepending on the Windows settings, installed applications, and drivers, menus and otherdisplays may differ, or some functions (such as use of the password reset disk) may be inop-erable. Check with your system administrator for details.You can select Classic view for the Control Panel or select the Classic Start menu. You canalso change the way a user logs on or off.The procedure in this manual uses the method or view of the Windows XP default setting(not Classic view or Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand following the stepsbelow.1Select [start] - [Control Panel] - [User Accounts].2Select [Prevent a forgotten password] from the [Related Tasks] menu of the account youhave logged on to, and create a password reset disk following the on-screen instructions.Store the password reset disk in a safe place.• Only the logon password for each account can be reset.The password set in the Setup Utility ( “Setup Utility”) cannot be reset.

Navigation menu