Panasonic of North America 9TGCF-29BA Panasonic Toughbook w/ WLAN, CDMA & Bluetooth User Manual Supplemental Users Manual for Bluetooth

Panasonic Corporation of North America Panasonic Toughbook w/ WLAN, CDMA & Bluetooth Supplemental Users Manual for Bluetooth

Supplemental Users Manual for Bluetooth

3ENGLISHBluetooth is a technology which enables wireless communication. With Bluetooth, you canaccess internet or exchange data with other Bluetooth devices (e.g., computer, mobile phone,access point) without connecting cables.Bluetooth Specification• Bluetooth Specification V1.1 Compliant• Power class: Class 1Bluetooth Services• LAN Access Profile (Client and Server)• Dial-up Networking Profile (Client and Server)• FAX Profile (Client)• Serial Port Profile (Client and Server)• Generic Object Exchange Profile• Object Push Profile (Client and Server)• File Transfer Profile (Client and Server)• Synchronization Profile (Client and Server)• Generic Access Profile• Headset Profile (AG and HS)• Hardcopy Cable Replacement Profile (Client)• Personal Area Network Profile (AP, Group and User)• Human Interface Device Profile (Host)Bluetooth Switch (Bluetooth ON/OFF)Bluetooth can be switched on or off.To switch Bluetooth offSelect (blue icon) on the taskbar and select [Disable Bluetooth]. turns .To switch Bluetooth back onSelect (blue icon with red prohibition symbol) and select [Enable Bluetooth].About BluetoothCommunications are conducted via a Bluetooth antenna.Do not do anything to block the radio waves, for example by obstructing the antennasegment with your hand.Communication speeds and distances may vary depending on surrounding condi-tions, such as the other device sending or receiving communications and the instal-lation environment.It is a characteristic of radio waves that communication speeds will tend to decreaseas the communication distance increases. We recommend that communications be-tween Bluetooth devices be conducted in as close proximity as possible.Communication speeds may decrease if a microwave oven is being used nearby.NOTECAUTIONBluetooth AntennaCF-18 SeriesBluetooth AntennaCF-29 SeriesBluetooth AntennaCF-73 Series
4ENGLISHConnecting to Bluetooth DevicesWhen [Found New Hardware Wizard] is displayed, select [Cancel].<For MUI (Multilingual User Interface) OS version>Install the driver before you change the setting of language. If you have alreadychanged it, set the language to the default values in the following menu.After the installation completes, change the setting of language.Windows 2000[Start] - [Settings] - [Control Panel] - [Regional Options]• [Your locale (location)] - [English (United States)]• [Menus und dialogs] - [English]Windows XP[Start] - [Control Panel] - [Date, Time, Language and Regional Options] - [Regionaland Language Options]• [Regional Options] - [Standards and Formats] - [English (United States)]• [Languages] - [Language used in menus and dialogs] - [English]NOTEPerform the following procedure after completing the first-time use operation ( Operat-ing Instructions “First-time Operation”).Installing Bluetooth DriverWindows 20001Connect the CD drive (optional), and install the driver if nec-essary.2Place the Bluetooth Software CD-ROM into the CD drive.3Select [Start] - [Run], enter “d*:\btw\setup.exe”, and then se-lect [OK].4At [Welcome to the InstallShield Wizard for WIDCOMMBluetooth Software...], select [Next].5After reading the license agreement, select [I accept the termsin the license agreement], and select [Next].6At [Destination Folder], select [Next].7At [Ready to Install the Program], select [Install].8At [Driver Signature Notice], select [OK].9At [InstallShield Wizard Completed], select [Finish].10Select [Yes] to restart the computer.11Select [Start] - [My Bluetooth Places].12Select the locations where you want the icon to appear, andselect [Next].
5ENGLISHWindows XP1Connect the CD drive (optional), and install the driver if nec-essary.2Place the Bluetooth Software CD-ROM into the CD drive.3Select [Start] - [Run], enter “d*:\btw\setup.exe”, and then se-lect [OK].4At [Welcome to the InstallShield Wizard for WIDCOMMBluetooth Software...], select [Next].5After reading the license agreement, select [I accept the termsin the license agreement], and select [Next].6At [Destination Folder], select [Next].7At [Ready to Install the Program], select [Install].8At [Driver Signature Notice], select [OK].9At [InstallShield Wizard Completed], select [Finish].10Select [Start] - [All Programs] - [My Bluetooth Places].13Enter the computer name, set [Computer type] to [Laptop],and then select [Next].14Select [Next].15At [Choose the services that this computer will offer:], se-lect [Next].16Select [Skip].17Select [Finish].18Select [Start] - [Run], enter “d*:\btswitch\setup.exe”, and thenselect [OK].19At [Welcome to the InstallShield Wizard for BluetoothSwitch...], select [Next].20Select [Yes, I want to restart my computer now], and select[Finish].The computer will restart.21Remove the CD-ROM and the CD drive.*“d” is the drive letter of the CD drive. You can change the letter to suit your preference.
6ENGLISHConnecting to Bluetooth Devices<Example>When connecting to Bluetooth printer using the Serial Port Profile:1Double-click on the desktop.2Select [Bluetooth] from the menu and select [Advanced Con-figuration] - [Client Applications], then double-click [BluetoothSerial Port].The [Bluetooth Properties] screen*1 is displayed.Make a note of the Bluetooth serial port number (e.g., COM7)*2 displayed in [COMPort]. This is necessary for the setting on page 7.3Remove the check mark from [Secure Connection], and se-lect [OK].ConnectingMake the required settings to connect to the desired Bluetooth devices beforehand.(e.g., installing a printer driver for the desired printer.)NOTE11Select the locations where you want the icon to appear andselect [Next].12Enter the computer name, set [Computer type] to [Laptop],and then select [Next].13Select [Next].14At [Choose the services that this computer will offer:], se-lect [Next].15Select [Skip].16Select [Finish].17Select [Start] - [Run], enter “d*:\btswitch\setup.exe”, and thenselect [OK].18At [Welcome to the InstallShield Wizard for BluetoothSwitch...], select [Next].19Select [Yes, I want to restart my computer now], and select[Finish].The computer will restart.20Remove the CD-ROM and the CD drive.*“d” is the drive letter of the CD drive. You can change the letter to suit your preference.
7ENGLISHBluetooth Serial PortWhen you use the Bluetooth serial port service, you can establish connections between twoBluetooth devices via a virtual communication port. This means that you can handle con-nected devices in the same way as you would hard-wired connections.To establish a Bluetooth serial port connection, configure the serial port number of theselected device to the Bluetooth serial port number.Setting<Example>Set the serial port number of the desired printer to COM7*2.Windows 20001Select [Start] - [Settings] - [Control Panel] - [Printers].2Right-click the desired printer and select [Properties] - [Ports]. Then select [COM7*2],and select [OK].Windows XP1Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Printers and Faxes].2Right-click the desired printer and select [Properties] - [Ports]. Then select [COM7*2],and select [OK].*1This screen may be displayed behind the [My Bluetooth Places] screen. In this case, minimize the[My Bluetooth Places] screen.*2This varies depending on the settings.4Select [OK].5Right-click on the taskbar, and select [Quick Connect] -[Bluetooth Serial Port] - [Find Devices].6Select the desired Bluetooth printer, and select [Connect].7When [Created connection shortcut…] is displayed, select[OK].8When [The Bluetooth serial port COM7*2 is now configured…]is displayed, select [OK].9Windows 2000Restart the computer by selecting [Start] - [Shut Down] - [Re-start] - [OK].Windows XPRestart the computer by selecting [Start] - [Turn Off Com-puter] - [Restart].
8ENGLISHSecurity SettingYou can establish security settings for individual services.To enable/disable the security setting:1Double-click on the desktop.2Select [Bluetooth] from the menu, and select [Advanced Con-figuration] - [Client Applications].3Double-click the desired application name (service).4To enable:Add the check mark for [Secure Connection].To disable:Remove the check mark from [Secure Connection].5Select [OK], then select [OK].PIN Code RequestIf the security setting is enabled, when you try to connect to other Bluetooth devices, thefollowing message will appear, and you will be asked for the PIN Code.Click here and enter a PIN Code, then select [OK].PIN CodeA PIN Code is a password for which you can set up to 16 alphanumeric characters.When establishing security settings, the PIN Code for the device to be connected (slave)must be the same as the PIN Code for the device where the connection originates (mas-ter).NOTE
9ENGLISHTHE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”)ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITHTHE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMEDTO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licensestheir use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) toachieve your intended results, and for the installation, use and results obtained therefrom.LICENSEA. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs inaccordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving onlya LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, owner-ship nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts,designs and ideas represented by or incorporated in the Programs and related documentation, all of which title,ownership and rights shall remain with MEI or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the confidentiality of the Programs. You may notdistribute or otherwise make the Programs or related documentation available to any third party, by time-sharingor otherwise, without the prior written consent of MEI.D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation forany purpose, except that you may make one (1) copy of the Programs for backup purposes only in support ofyour use of the Programs on the single Product which was accompanied by the Programs. You shall not modify,or attempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in connection with your transfer of thesingle Product which was accompanied by the Programs to such other party. At the time of such a transfer, youmust also transfer all copies, whether in printed or machine readable form, of every Program, and the relateddocumentation, to the same party or destroy any such copies not so transferred.F. You may not remove any copyright, trademark or other notice or product identification from the Programs andyou must reproduce and include any such notice or product identification on any copy of any Program.G. For a certain program included in the Programs, Widcomm, Inc. is a direct and intended beneficiary of thisAgreement and may enforce it directly against you.YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACETHE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, INWHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.LIMITED USE LICENSE AGREEMENT
10ENGLISHLIMITED USE LICENSE AGREEMENTTERMThis license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminatethis license at any time by destroying, at your expense, the Programs and related documentation together with allcopies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditionstherefore set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein.Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation togetherwith all copies thereof in any form.SOFTWARE LIMITED WARRANTYMEI warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defectsin materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you,as evidenced by your purchase receipt.This is the only warranty MEI makes to you. MEI does not warrant that the functions contained in the Programs willmeet your requirements or that the operation of the Programs will be uninterrupted or error free.MEI’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the countrywhere you purchased the Product, of any defective disk or other media which is returned to MEI, together with a copyof the purchase receipt, within the aforesaid warranty period.Anything in the foregoing to the contrary notwithstanding, MEI shall have no obligation for any defects in the disk(s) orother media on which the Programs are furnished resulting from your storage thereof, or for defects that have beencaused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions otherthan those specified by MEI by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation,maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God.In addition, MEI shall have no obligation for any defects in the disk(s) or other media if you have modified, or attemptedto modify any Program.DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. MEI ASSUMES NO RISK OF ANDSHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL,INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CON-TRACT, NEGLI-GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOOD-WILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIP-MENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS,OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitations on howlong an implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from country tocountry.YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUNDBY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-TER OF THIS AGREEMENT.
11ENGLISH11SpecificationsTransmission methodWireless channels usedRF frequency bandFHSS systemChannels 1 to 792402-2480 MHz
DFQX5440ZA© 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Navigation menu