Panasonic of North America 9TGCF-482 Panasonic Toughbook w/ Intel WLAN User Manual

Panasonic Corporation of North America Panasonic Toughbook w/ Intel WLAN Users Manual

Users Manual

Download: Panasonic of North America 9TGCF-482 Panasonic Toughbook w/ Intel WLAN User Manual
Mirror Download [FCC.gov]Panasonic of North America 9TGCF-482 Panasonic Toughbook w/ Intel WLAN User Manual
Document ID324605
Application IDi0nBTHnYnbpHF0TscAcPJA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize80.72kB (1008981 bits)
Date Submitted2003-05-09 00:00:00
Date Available2003-05-07 00:00:00
Creation Date2003-04-09 01:28:41
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-04-09 11:18:11
Document TitleUsers Manual

®
Personal Computer
OPERATING INSTRUCTIONS
CF-48 Series
Model No.
Getting Started
Read Me First.................................................. 3
First-time Operation ........................................ 9
2000 XP
Reference Manual
•
•
Read Me First
Key Combinations
•
LED Indicators
Getting Started
Contents
Reference Manual
• Touch Pad (Advanced)
• Standby/Hibernation
Functions
• Security Measures
• Computing on the Road
• Battery Power
• CD Drive
• PC Cards
• RAM Module
•
•
•
•
•
•
•
•
•
Port Replicator
Printer
External Display
USB Devices
Modem
LAN
Wireless LAN
Hard Disk Drive
Setup Utility
Troubleshooting
List of Error Codes ......................................... 19
Dealing with Problems (Summary)....................... 21
Reinstalling Software .................................... 25
Reference Manual
•
•
Technical Information
DMI Viewer
•
•
List of Error Codes
Dealing with Problems
Troubleshooting
Starting Up/Shutting Down ............................ 14
Touch Pad (Basic Operation) ................................... 17
Reference Manual ......................................... 18
Operation
Operation
(Advanced)
[Additional Manual]
Reference Manual
This manual can be accessed on your computer.
Refer to page 20 on how to access the Reference Manual.
LIMITED USE LICENSE AGREEMENT ........ 27
Hard Disk Data Erase Utility .......................... 28
Win DVD™ .................................................... 29
B’s Recorder/B’s CLiP ................................... 31
Names and Functions of Parts ...................... 33
Specifications ................................................ 35
LIMITED WARRANTY ................................... 37
Please read these instructions carefully before using this product and save this manual for future use.
Appendix
Appendix
Customer's Record
Model No.*
Dealer's Name
Serial No.
or
Code No.
Dealer's Address
Date of Purchase
* For the Model No., insert the 12 digit number (for example, CF-48E4KFUDM) located on the
bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new
computer.
Illustrations and Terminology in this Manual
NOTE:
CAUTION:
WARNING:
[Start] - [Run]:
Enter :
Fn + F5 :
Windows 2000 :
Windows XP :
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
WARNING indicates a hazard that may result in moderate or serious injury.
This illustration means to click [Start], then to click [Run].
(For some applications, you may need to double-click.)
In Windows XP, [Start] is displayed as [start].
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
Information for Microsoft® Windows® 2000 Professional users.
Information for Microsoft® Windows® XP Professional users.
Where to go for referred information.
This illustration means to refer to the Reference Manual, which is available on your computer.
Refer to page 20 on how to access this manual.
Windows 2000 screens are used in this manual when no specific OS notes are required.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation
easier to understand.
Circular media such as CD-ROM and DVD-ROM are described as “discs”.
The following drives are described as “CD drive”.
DVD-ROM drive, DVD-ROM & CD-R/RW drive, DVD Multi drive
If the user has logged on without the administrator authority, some functions may not be executable, and some screens may
be not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be
reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no
liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft®, Windows® and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other
countries.
PS/2® is a trademark of International Business Machines Corporation.
Intel, Pentium, SpeedStep and PROSet are either registered trademarks or trademarks of Intel Corporation.
Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
WinDVD™ is a trademark of InterVideo, Inc.
Panasonic ® is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Read Me First
For U.S.A.
Federal Communications Commission Radio
Frequency Interference Statement
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Manufacturer of modem: PC TEL Inc.
Model No. PCT2304WT
Warning
To assure continued compliance, use only shielded interface
cables when connecting to a computer or peripheral. Also, any
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.
FCC RF Exposure Warning: This computer is provided with
PC Card slots that could be used with wireless transmitter(s),
which will be specifically recommended, when they become
available. Other third-party wireless transmitter(s) have not been
RF exposure evaluated for use with this computer and may not
comply with FCC RF exposure requirements.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP-5 (1-800-527-8675)
FCC RF Exposure Warning:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance
with provided instructions and minimum 2.5 cm spacing must
be provided between antenna and all person’s body (excluding
extremities of hands, wrist and feet) during wireless modes of
operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This computer is
provided with a PC Card slot that could be used with wireless
transmitter(s), which will be specifically recommended, when
they become available. Other third-party wireless transmitter(s)
have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
1. This equipment complies with CFR47 Part 68 rules. On the
computer is a label that contains, among other information,
the FCC registration number and ringer equivalence number
(REN) for this equipment. If required, this information must
be provided to the telephone company.
2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be
connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant.
See Installation Instructions for details.
3. The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on
the telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all area, the
sum of RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone
company.
4. If your telephone equipment cause harm to the telephone
network, the telephone company will notify you in advice
that temporary discontinuance of service may be required.
But if advice notice isn’t practical, the telephone company
will notify the customer as soon as possible. Also, you will
be advised of your right to file a complaint with the FCC if
you believe it is necessary.
5. The telephone company may take changes in it’s facilities,
equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment, for repair or
warranty information, please contact Matsushita Electric
Corporation of America at DIAL TOLL FREE 1-800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to
the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
7. There are no user serviceable parts contained in this equipment.
8. This equipment may not be used on coin service provided
by the telephone company. Connection to party lines is subject to state tariffs.
9. The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification
of the business or other entry, or other individual sending the
message and the telephone number of the sending machine or
such business, other entity, or individual. In order to program
this information into your fax software, you should refer to
the manual of the Fax software being used.
Getting Started
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Read Me First
10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients,
are very destructive to customer terminal equipment connected
to AC power sources and that this is a major nationwide problem.
Getting Started
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des
conducteurs de télécommunications 26 AWG ou de section supérieure.”
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a
small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or
recycling information please contact your local authorities, or
the Electronics Industries Alliance: 
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury to persons, including the following:
1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.
2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock
from lightning.
3.Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode.
Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product
however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this
product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result
from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible
representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports),
you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction
of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or
distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these
guidelines.
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time,
and other data to be stored. The battery should only be exchanged
by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
CD Drive Caution
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL
CLASS 1 LASER PRODUCT
LASER KLASSE1
Precautions
Getting Started
Bottom
This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc., but no warranty is
provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling.
Usage
Handling
Avoid Extreme Heat and Cold
Do not store or use the computer in locations
exposed to heat, direct sunlight, or extreme cold.
Avoid moving the computer between locations
with large temperature difference.
Operation: 5 oC to 35 oC {41 oF to 95 oF}
Storage:
-20 oC to 60 oC {-4 oF to 140 oF}
Avoid Magnetic Fields
Keep the computer away from magnets.
Data stored on the hard disk may be lost.
Avoid Direct Sunlight on the LCD Panel
The LCD panel should not be exposed to direct
sunlight or ultraviolet light.
Keep Small Objects Away
Do not insert paper clips or other small objects into
the computer.
Avoid Humidity, Liquids and Dust
Do not store or use the computer in locations exposed to high humidity, liquids (including rain) or
dust.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Prevent Shock
Avoid subjecting the computer to severe
vibrations or impact. Do not place the computer
inside a car trunk.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the display
when it is completely opened, especially when plugs
and/or cables are connected to the rear of the computer.
Avoid Radio Frequency Interference
Do not place the computer near a television or
radio receiver.
Avoiding low-temperature burns
Avoid more than casual contact with any heat producing area of the notebook computer, AC adaptor, and any option or accessory you use with it.
Even low heat, if warmer than body temperature,
can cause a burn, if the skin is exposed to the heat
source for a long enough period of time.
Avoid Stacking
Do not place heavy objects on top of the computer.
Peripherals
Incorrectly using peripheral devices may lead to a decrease in
performance, an increase in temperature and/or damage your
computer. For more information on peripheral devices, refer to
the Reference Manual.
Cables
Use of an interface cable longer than 3 m (9.84 feet) is not recommended.
Read Me First
Precautions (Battery Pack)
Getting Started
Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage.
Avoid Heat
Do not throw the battery pack into a fire or expose it to excessive heat.
Keep Articles Away
Do not place the battery pack together with articles
such as necklaces or hairpins when carrying or storing.
Do Not Disassemble
Do not insert sharp objects into the battery pack,
expose it to bumps or shocks, deform, disassemble,
or modify it.
Do Not Short
Do not short the positive (+) and negative (-) contacts.
Avoid Extreme Heat, Cold and Direct Sunlight
Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct
sunlight, in a hot place (in an automobile on a sunny
day, for example), or in a cold place.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was intended
for the specified computer or charger. Do not use it
with a computer other than the one for which it was
designed.
Do Not Put into a Microwave
Do not put the battery pack into a microwave oven
or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, become
hot to the touch, become discolored, change shape,
or become in any way different from normal, remove it from the computer and stop using it.
Do not touch the terminals on the battery pack. The battery
pack may no longer function properly if the contacts are dirty
or damaged.
Do not expose the battery pack to water, or allow it to become wet.
If the battery pack will not be used for a long period of time
(a month or more), charge or discharge (use) the battery pack
until the remaining battery level becomes 30% to 40% and
store it in a cool, dry place.
This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx.
95% of capacity.
The battery pack is not charged when the computer is first
purchased. Be sure to charge it before using it for the first
time. When the AC adaptor is connected to the computer,
charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not
rub your eyes. Immediately flush your eyes with clear water
and see a doctor for medical treatment as soon as possible.
NOTE
The battery pack may become warm during recharging or
normal use. This is completely normal.
Recharging will not commence outside of the allowable
temperature range (0 °C to 45 °C {32°F to 113 °F})
“Battery Power”. Once the allowable range
requirement is satisfied, charging begins automatically.
Note that the recharging time varies based on the usage
conditions. (Recharging takes longer than usual when the
temperature is 10 °C {50 °F} or less.)
If the temperature is low, the operating time is shortened.
Only use the computer within the allowable temperature
range.
The battery pack is a consumable item. If the amount of
time the computer can be run off a particular battery pack
becomes dramatically shorter and repeated recharging do
not restore its performance, the battery pack should be
replaced with a new one.
When a spare battery pack is to be carried in a pocket or
bag, it is recommended that it be placed in a plastic bag so
that its contacts are protected.
Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected
will exhaust the remaining battery capacity.
When using peripheral devices
Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.
Also, in addition to following this manual, carefully read the instruction manuals for the peripheral devices
being used.
Use only peripheral devices that conform to the computer’s specifications.
Connect the devices properly, paying close attention to the condition and position of the connectors.
If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.) .
If the connector has holding screws, fasten the screws firmly.
Do not carry the computer with cables attached, and do not pull on the cables forcefully.
Saving Data on the Hard Disk
Windows 2000 : This computer uses Microsoft® Windows® 2000 Professional.
Windows XP : This computer uses Microsoft® Windows® XP Professional.
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the
hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk
is returned to the original computer, you can read/write data as before. In this case, however, make the settings
in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk
Lock does not guarantee the complete protection of data.) (
“Security Measures”)
Getting Started
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable.
Do not power down your computer while software applications are running or hard disk drive indicator ( )
is on.
Properly shut Windows* down to avoid problems.
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should you inadvertently change or erase data.
Use the security function for all important data. (
“Security Measures”)
Saving Data on Floppy Disks
Do not power down your computer or press the floppy disk drive eject button while the floppy disk
drive indicator ( ) is on.
Doing so may damage the data on the floppy disk and render the floppy disk useless.
Use care when handling floppy disks.
To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following:
• Sliding the shutter on the floppy disk manually.
• Exposing the floppy disk to a magnetic field.
• Storing the floppy disk in locations prone to high temperatures, low pitched noise, dampness, or dust.
• Applying more than one label on the floppy disk.
Confirm the contents of a floppy disk before formatting it.
Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased.
Use the write-protect tab.
Write-protect Tab
This is a must for preserving important data.
This prevents your data from being erased or overwritten.
Write Enable
Write Disable
Computer Viruses
Users are advised to purchase the latest versions of virus protection software and use them regularly.
We recommend you run the software:
• When booting your computer.
• After receiving data.
We recommend that you check data received on disks or from external sources, such as data downloaded
from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the
theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data
can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a
charge) or use the hard disk data erase utility (included) ( page 31). (Note that this hard disk data erase utility
does not guarantee that data will be completely erased.)
Also, note that if you transfer ownership of this device without deleting commercial software that you have
installed to the hard disk, you may be in violation of the licensing agreement for that software.
Read Me First
Wireless LAN
To prevent theft of data or unauthorized access to the hard disk via a wireless LAN
If you plan to use wireless LAN functions, we recommend that you do so only after making the
appropriate security settings, such as for data encryption.
Usage Environment
Environment
Getting Started
Place the computer on a flat stable surface. Do not place the computer upright or allow it
to tip over. When the computer receives extremely strong shock after falling, the hard
disk or floppy disk drive, etc., may become inoperable.
In use:
Temperature: 5 °C to 35 °C {41 °F to 95 °F}
Humidity:
30% to 80% RH (No condensation)
Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}
Humidity:
30% to 90% RH (No condensation)
Places not to use your computer
Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange
sounds.
Areas with extremely high/low temperatures
Do not leave things near the computer that are sensitive to heat. During operation, the
computer may become warm.
Handling
Do not drop or hit your computer against solid objects.
Do not carry your computer when it is on.
Remove all external devices, cables, and PC Cards sticking out of the computer (see the
figure on the left) before transporting the computer.
We recommend preparing a fully charged battery.
When transporting a spare battery inside a package, briefcase, etc., it is recommended that it
be placed in a plastic bag so that its contacts are protected.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
Always carry your computer with you. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.
Do not leave a disk in the drive while transporting your computer.
Maintenance
Touch Pad
page 17
Display
Avoid using water when cleaning the panel. Ingredients included in water may leave scratches
and reduce readability of the screen.

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.
Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses.

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with
dry soft cloth used for cleaning glasses.
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the
soft cloth and firmly wringing out excess water.
CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do
not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to work improperly
or be damaged.
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact Panasonic Technical Support.
AC Cord ...............1
Model No : CF-AA1653
Modem Telephone
Cable ................... 1
Battery Pack ........1
Model No :CF-VZSU18A
Product Recovery CD-ROM
Windows 2000
Windows XP
Getting Started
AC adaptor ..........1
Operating Instructions (This book) .........................................................1
Windows ® Book ...................................................................................1

WinDVD™ CD-ROM (
page 29) ......................................................1

WinDVD™ CD-ROM (
page 29) ......................................................1
B’s Recorder/B’s CLiP CD-ROM (
page 31) .................................. 1

WinDVD™ CD-ROM (
page 29) ......................................................1
B’s Recorder/B’s CLiP CD-ROM (
B’s Recorder/B’s CLiP Booklet) ......1
2 Read the LIMITED USE LICENSE AGREEMENT (
page 27)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT.
Latch
3 Insert the battery pack
Cover
1 Turn your computer over.
2 Slide the latch, and then without releasing it, slide and remove the cover.
Battery Pack
Tab
3 Put the battery pack into the computer and firmly attach the pack to the connector.
4 Match the mark on the cover to the body of the computer and slide the cover back
into place. Be sure the tab does not get caught when closing the cover.
CAUTION
Mark
If the cover is not attached properly, the battery may fall out while the computer is being carried.
First-time Operation
DC-IN Jack
4 Connect your computer to a power outlet
The battery pack will be charged automatically.
Charging Time: Approx. 3 hours
(Varies depending on the usage conditions.)
CAUTION
Getting Started
Be sure the AC adaptor is connected until completing Step 7 on page 11.
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor other
than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from
your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible power
source (UPS) is highly recommended unless running from the battery pack alone.
5 Open the display
1 Slide the latch located at the front.
2 Lift open the display.
6 Turn your computer on
Press the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
CAUTION
Power
Switch
Power Indicator
10
Do not press the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
Do not press the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
7 Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad (
page 17).
Windows 2000
CAUTION
1 At the [Welcome to the Windows 2000 Setup Wizard], select [Next].
2 After reading the agreement, select [I accept this agreement] or [I don't accept this
agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
Getting Started
Do not press any key or touch the touch pad until [Windows 2000 Professional Setup]
is displayed.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and the time zone, then select [Next].
7 At [Networking Settings], select [Typical settings], then select [Next].
8 At [Workgroup or Computer Domain], select [No, this computer is not on a network,
10
11
12
or is on a network without a domain], then select [Next].
The computer will restart.
At [Welcome to the Network Identification Wizard], select [Next].
At [Users of This Computer], select [Users must enter a user name and password to
use this computer], then select [Next].
Select [Finish].
Enter your administrator password and select [OK].
11
First-time Operation
Windows XP
CAUTION
Do not press any key or touch the touch pad until [Windows XP Professional Setup] is
displayed.
1 At the [Welcome to the Windows XP Setup Wizard], select [Next].
2 After reading the agreement, select [I accept this agreement] or [I don't accept this
agreement], then select [Next].
Getting Started
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date and time, then select [Next].
NOTE
It may take two to three minutes until the next screen is displayed. Wait, and do
not press any keys, or touch the touch pad, etc.
7 At the [Networking Settings], select [Typical settings], then select [Next].
8 At the [Workgroup or Computer Domain], select [No, this computer is not on a net-
work, or is on a network without a domain], then select [Next].
The computer will restart.
9 Enter your administrator password and select .
NOTE
When creating a new user account:
Create an account and restart the computer before making mail settings, creating
password reset disks (
page 13), or conducting other related operations. Note
that after creating this user account, you will be unable to use any previous mail
history or settings.
When you create the first new account, you can only select [Computer administrator].
Create a “Computer Administrator” account before creating additional user accounts with restrictions. Once this has been created, you can create additional restricted user accounts.
Note also that only the added user account will be displayed in the Welcome screen.
The account for the administrator created during Windows setup (when the computer is started up for the first time) will not be displayed.
This concludes the first-time use operation guidelines.
NOTE

Before using the DVD-ROM & CD-R/RW drive for the first time, remove the protective
sheet from the lens area. The protective sheet inside the drive delays the opening of the
drive by about ten seconds. This delay is not a problem.
12
Information for Windows XP
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable. Check with your system administrator for details.
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following the
steps below.
1 Select [start] - [Control Panel] - [User Accounts] and select the account you used to
logon.
2 Select [Prevent a forgotten password] from [Related Tasks] menu and create a password reset disk following the on-screen instructions.
Store the password reset disk in a safe place.
· Only the logon password for each account can be reset.
The password set in the Setup Utility cannot be reset.
Getting Started
You can select Classic view for the Control Panel or select the Classic Start menu. You
can also change the way a user logs on or off.
The procedure in this manual uses the method or view of the Windows XP default
setting (not Classic view or Classic Start menu etc.).
13
Starting Up/Shutting Down
Starting Up
1 Open the display
1 Slide the latch as shown.
2 Lift open the display.
2 Turn your computer on
Press the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
CAUTION
Power
Switch
Operation
Power Indicator
While booting, avoid the following until the hard disk drive indicator ( ) has
turned off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard or touch pad (or external mouse) operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating. Should this happen, allow the computer to cool down then
switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
NOTE
You may encounter the following situations when the computer is turned on at very
low temperatures. These functions are designed to prevent hard disk drive malfunctions that may occur at low temperatures.
The message “Warming up the system” is displayed, and start-up takes longer than
usual (a few minutes or more).
In this case, wait for the computer to start up.
The power indicator will blink quickly (in green); in this case, the power does not
turn on, or the computer does not resume from standby or hibernation mode.
To start the computer, leave it in an environment with a temperature of 5°C {41°F}
or more for about an hour, and try turning the power on once more.
If [Enter Password] is displayed
Enter your password* and press Enter . (
“Security Measures”)
The correct password
Enter Password [
Will Start
Three incorrect attempts
or
No password for about a minute
Will Not Start
(Power off)
Supervisor Password or User Password set in the Setup Utility (not
the Windows password).
When an application or file that was previously displayed
appears on your screen
The standby or hibernation mode has been set (
Functions”).
14
“Standby/Hibernation
3 Log on to Windows
Windows 2000
After confirming that the hard disk drive indicator ( ) has turned off, input the user
name and password, then select [OK]. Until the correct user name and password are
entered, the computer will not operate.
Windows XP
After confirming that the hard disk drive indicator ( ) has turned off, select the user
and input the password, then select . Until the correct password is entered, the
computer will not operate.
4 Select your application
You are able to start working on your computer.
The power saving function is factory set, so if there is no input from a key, the touch pad or
an external mouse (when one is connected) for a certain interval of time, the power to the
LCD and hard disk may be turned off. The LCD will resume operation when the touch pad
or an external mouse (when one is connected) is used or a key is pressed.
The power to the LCD may be turned off even when an application software is being
installed. In this case, because it is conceivable that a selection dialog box will be shown,
do not press Space or Enter to attempt to resume from this condition as doing so
may trigger a selection, but instead, press a key unrelated to the direct triggering of a
selection, like Ctrl .
In addition, when the computer is left alone, it automatically enters the standby or hibernation mode (
“Standby/Hibernation Functions”). The computer will resume by
pressing the power switch.
Windows XP
When switching to a different user with the Fast User Switching function, it may not be
possible to set the settings of the display. In this case, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.
Operation
NOTE
15
Starting Up/Shutting Down
Shutting Down (power off your computer)
This procedure is for shutting down the computer without using the standby or hibernation
function (
“Standby/Hibernation Functions”).
1 Save important data and close each application
2 Windows 2000
Select [Start] - [Shut Down]
Windows XP
Select [start] - [Turn Off Computer]
Windows 2000
Select [Shut down], then select [OK]
Windows XP
Select [Turn Off]
Your computer will power off automatically.
Operation
Restarting your computer (without shutting down)
Windows 2000
Select [Restart], then select [OK].
Windows XP
Select [Restart].
CAUTION
Do not do the following during the shutdown/restart procedure.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad or external mouse operations.
• Closing the display.
NOTE
To shut down using the keyboard,
Windows 2000
Press
, U , and select [Shut down] with
, then press Enter .
Windows XP
Press
, U , and select [Turn Off] with
, then press Enter .
To quickly resume computer operation after shutting down,
The standby or hibernation function is available (
“Standby/Hibernation
Functions”).
16
Touch Pad (Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
Basic Operation
Function
Operation
Moving the Cursor
Move the tip of your finger
lightly over the surface.
Right Button
Tapping/Clicking
or
clicking
tapping
Double-Tapping/
Double-Clicking
or
double-tapping
double-clicking
Dragging
or
Two quick taps, but on the second tap leaving your finger
down (applying pressure) and
moving it on the work surface.
While holding down the button, moving your finger on
the work surface.
Operation
Left Button
Scroll
Scroll a document
(The movements will differ depending on the application.)
NOTE
Besides the above operations, operations such as Zoom and Pan are possible by allocating
these functions to the buttons and/or pad. For more details, refer to [Mouse Properties]*.
* Windows 2000 : Select [Start] - [Settings] - [Control Panel] - [Mouse].
Windows XP
: Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
The operations of Scroll, Pan or Zoom will differ depending on the application. There are
cases the touch pad will not support these operations even with an application that supports the functions.
Handling the Touch Pad
The touch pad is designed to be used with a fingertip only. Therefore, avoid the following
actions, which may cause damage to the work surface.
• Placing any object on the work surface
• Pressing down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can
leave marks (e.g., pencils and ball point pens)
Try to avoid having any harmful substances such as oil, come in contact with the touch pad.
The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,
e.g., discoloration. In addition, do not use commercially-available household cleaners and
cosmetics, as they may contain components harmful to the surface.
17
Reference Manual
The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can
also be printed.
The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices,
how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contents
included.)
Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away from
your home or office.
Running the Reference Manual or Important Tips
Reference Manual
Windows 2000
Select [Reference Manual] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]
Windows XP
Select [Reference Manual] in [start]
Important Tips
on the desktop
Select
Operation
Important Tips can also be accessed from the following menu.
Windows 2000
Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals].
Windows XP
Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals].
18
When the Reference Manual or Important Tips is started up for the first time, the License Agreement of the Acrobat Reader may be
displayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips.
NOTE
Illustrations may be difficult to view depending on the magnification. If the illustration is too small, magnify the display.
The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Reader settings
and the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure.
1 Start up Acrobat Reader.
2 Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use colors specified in document].
When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size.
If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a high
quality.
Windows XP
When switching to a different user with the Fast User Switching function, PDF files may not be printed properly. In this case,
log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.
List of Error Codes
0200 Failure Fixed Disk
Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out
if the fixed-disk type is correctly identified.
0210 Stuck key
Stuck key on keyboard.
0211 Keyboard error
Keyboard not working.
0212 Keyboard Controller Failed
Keyboard controller failed test. May require replacing keyboard controller.
0213 Keyboard locked - Unlock key switch
Unlock the system to proceed.
0230 System RAM Failed at offset : nnnn
System RAM failed at offset nnnn of in the 64k block at which the error was detected.
0231 Shadow RAM Failed at offset : nnnn
Shadow RAM failed at offset nnnn of the 64k block at which the error was detected.
0232 Extended RAM Failed at offset : nnnn
Extended RAM Failed at address line : nnnn
Extended memory not working or not configured properly at offset or address line nnnn.
0250 System battery is dead - Replace and run SETUP
The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup to reconfigure the system.
*0251 System CMOS checksum bad - Default configuration used
System CMOS has been corrupted or modified incorrectly, perhaps by an application program that changes data
stored in CMOS. The BIOS installed Default SETUP Values. If you do not want these values, enter Setup and enter your
own values. If the error persists, check the system battery or contact Panasonic Technical Support.
0260 System timer error
The timer test failed. Requires repair of system board.
0270 Real time clock error
Real-time clock fails BIOS test. May require board repair.
*0280 Previous boot incomplete - Default configuration used
Previous POST did not complete successfully. POST loads default values and offers to run Setup. If the failure was caused
by incorrect values and they are not corrected, the next boot will likely fail. On systems with control of wait states, improper
Setup settings can also terminate POST and cause this error on the next boot. Run Setup and verify that the wait-state
configuration is correct. This error is cleared the next time the system is booted.
0281 Memory Size found by POST differed from EISA CMOS
Memory size found by POST differed from EISA CMOS.
02B0 Diskette drive A error
02B1 Diskette drive B error
Drive A: or B: is present but fails the BIOS POST diskette tests. Check to see that the drive is defined with the proper
diskette type in Setup and that the diskette drive is attached correctly.
02B2 Incorrect Drive A type - run SETUP
Type of floppy drive A: not correctly identified in Setup.
02B3 Incorrect Drive B type - run SETUP
Type of floppy drive B: not correctly identified in Setup.
02D0 System cache error - Cache disabled
Contact Panasonic Technical Support.
02F0: CPU ID:
CPU socket number for Multi-Processor error.
02F4: EISA CMOS not writable
ServerBIOS2 test error: Cannot write to EISA CMOS.
Troubleshooting
The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way
it has been configured. Following the list are explanations of the messages and remedies for reported problems.
If your system displays any of the below error messages other that the ones marked with an asterisk (*), write down the message
and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer,
enter Setup and install Setup defaults or correct the error.
19
List of Error Codes
Troubleshooting
02F5: DMA Test Failed
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
02F6: Software NMI Failed
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).
02F7: Fail - Safe Timer NMI Failed
ServerBIOS2 test error: Fail-Safe Timer takes too long.
device address Conflict
Address conflict for specified device.
Allocation Error for: device
Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device.
Failing Bits : nnnn
The hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map
indicates a failed bit. See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.
Invalid System Configuration Data
Problem with NVRAM (CMOS) data.
I/O device IRQ conflict
I/O device IRQ conflict error.
Operating System not found
Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: are properly
identified.
Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the
address, it displays ????. Parity is a method for checking errors in binary data. A parity error indicates that some data has
been corrupted.
Parity Check 2 nnnn
Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the
address, it displays ????.
Press  to resume,  to Setup
Displayed after any recoverable error message. Press  to start the boot process or  to enter a Setup and change the
settings. Write down and follow the information shown on the screen.
20
Dealing with Problems (Summary)
When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to be
related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic
Technical Support.
Starting Up
[Enter Password] is displayed
POST Startup Error(s) is
displayed
Windows startup, or an operation is extremely slow
The date and time are incorrect
When resuming from the
standby or hibernation
mode, [Enter Password]
does not appear even if a
password has been set in the
Setup Utility
When “Invalid system disk.
Replace the disk, and then
press any key.” (or a similar message) is displayed
When the administrator
password is forgotten
Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly installed.
Remove the battery pack and disconnect the AC adaptor, then connect them again.
Input your password. If you have forgotten it, contact Panasonic Technical Support.
page 19
Press F9 in the Setup Utility (
“Setup Utility”). This will restore the Setup
Utility’s settings to their default values (except the password settings). Then, the Setup
Utility must be run once again for you to input the appropriate operating environment settings. (The processing speed depends on the application software used, so this operation
may not cause the processing speed to increase.)
You can set the date and time using the following procedure.
Windows 2000 : [Control Panel] - [Date/Time]
Windows XP
: [Control Panel] - [Date, Time, Language, and Regional Options] [Date and Time]
When the computer is connected to a LAN, confirm the date and time of the server.
If you continue to experience problems, the internal battery maintaining the clock may
need to be replaced. Contact Panasonic Technical Support.
This computer will not correctly recognize the date and time starting from the year 2100
A.D.
Even when a password has been set in the Setup Utility, [Enter Password] does not appear
when the computer resumes from the standby or hibernation mode.
If you want to use the security function when using the standby or hibernation mode, use the
Windows password as follows:
Windows 2000
Set the password in [Control Panel] - [Users and Passwords], then add the check mark for
[Prompt for password when computer goes off standby] in [Control Panel] - [Power Options] - [Advanced].
Windows XP
Select the account to change in [Control Panel] - [User Account] and set the password, then
add the check mark for [Prompt for password when computer resumes from standby] in
[Control Panel] - [Performance and Maintenance] - [Power Options].
This means a floppy disk that does not contain system startup information has been left in
the floppy disk drive. Remove the floppy disk, and press any key.
If the message still appears even after trying the above measure, this may be an indication
that some type of hard disk failure has occurred. Contact Panasonic Technical Support.
Windows 2000
After reinstalling, setup Windows and then set the password again.
Windows XP
If you have created a password reset disk (
page 13), a message is displayed when you
fail to correctly enter the password. Follow the message’s instructions and set the password
again by using the password reset disk.
If you have not created a password reset disk, after reinstalling, setup Windows and then set
the password again.
Troubleshooting
The power indicator or battery indicator is not lit
21
Dealing with Problems (Summary)
Starting Up (continued)
When the previous item is
not the cause
Press F9 in the Setup Utility (
“Setup Utility”). This will restore the Setup
Utility’s settings to their default values (except the password settings).
Try removing all peripheral devices.
Check a disk error using the following procedure.
Windows 2000
1 Select [Local Disk(C:)] with the right button in [My Computer], and select [Properties].
2 Select [Tools] - [Check Now].
3 Select [Start] after selecting required items in [Check disk options].
Windows XP
1 Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select [Properties].
2 Select [Tools] - [Check Now].
3 Select [Start] after selecting required items in [Check disk options].
At start-up, press F8 to operate the computer in the Safe mode.
Display
No display after powering on
Troubleshooting
The power has not been
turned off, but after a certain period of time, there is
no display
When the battery pack is
used, the screen is darker
than when the AC adaptor
is connected
The cursor cannot be controlled properly
An afterimage appears (e.g.,
green, red, and blue dots
remain on the display) or
there are dots not displaying the correct colors
The screen becomes disordered
22
When there is no display to an external display,
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
Try changing the display by pressing Fn + F3 .
If you want to switch the display destination repeatedly by pressing Fn + F3 ,
make sure that the display destination has switched completely each time before
pressing Fn + F3 again.
When displaying only through an external display, if the computer is shut down by using
the standby or hibernation function, there will be no display on the LCD unless the external display is connected when operations are resumed. In this case, connect the external
display or press Fn + F3 .
Has the computer been set to the power-saving mode?
To resume operation of your computer from the condition the power of the display is off
(for energy conservation purposes), press any key unrelated to the direct triggering of a
selection, like Ctrl .
To save power, your computer may have automatically entered the standby or hibernation mode. (
“Computing On the Road”) Press the power switch.
Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is
increased, the battery running time will become shorter.
Brightness can be set to separate levels for when the AC adaptor is connected and when it is
disconnected.
If you are using an external mouse, ensure that the external mouse has been connected
correctly.
Restart the computer by using the keyboard (Press
, U , and select [Restart] with
, then press Enter ).
If the computer does not respond to keyboard commands, read “Computer hangs”
page 24).
If an image is displayed for a prolonged period of time, an afterimage may appear. This
is not a malfunction. The afterimage will disappear when a different screen is displayed.
High-precision and advanced technologies are necessary in the production of color liquid
crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either
fail to light or remain constantly lit (that is, more than 99.998% of elements are functioning properly), no defect is considered to exist.
Changing the number of colors of the display may affect the screen. Restart the computer.
Windows XP
When using Dualview, use the same display colors for the external display as those used
by the LCD.
Display
The external display no
longer displays properly
When the screensaver is set,
an error will occur during a
resume operation
Windows XP
An error occurs or the computer freezes while using
Dualview
When an external display not compatible with the power saving mode is used with the
computer, the external display may no longer display properly when the computer enters the
condition the power of the display is OFF (for energy conservation purposes). In such
cases, turn off the power to the external display.
When the computer automatically enters the standby or hibernation mode while the
screensaver is running, an error may occur during a resume operation. In such cases, turn off
the screensaver or try changing the pattern of the screensaver.
If you use a 3D screen saver while in Dualview mode at a high resolution, an error may
occur or the computer may freeze. Under these conditions, do not use a 3D screen saver.
Fast User Switching function Windows XP
Some applications may not
work properly
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly (for example, PDF files may not be printed
properly).
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• Fn + F3 may not work.
If any of the above occur, log on with the administrator authority again, not using the Fast
User Switching function, and try the operation once more.
The red indicator lights
The red indicator blinks
The orange indicator blinks
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor. You can use the computer when the indicator light is orange. If you
do not have an AC adaptor, save your data and power off your computer. After replacing the
battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer. Remove the battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or recharging function may be defective.
Battery cannot be recharged temporarily because the internal temperature of the battery pack
is outside of the acceptable temperature range for recharging. Once the allowable range requirement is satisfied, charging begins automatically. Your computer can be used normally.
Reference Manual
The Reference Manual is
not displayed
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [start] - [Run] to reinstall the program. When installing the program, do not change the installation destination
folder. If the destination folder is changed, the Reference Manual cannot be opened from
the [start] menu.
Troubleshooting
Battery Indicator
23
Dealing with Problems (Summary)
Shutting down
Windows cannot be shut
down or restarted
“This program is not responding” is displayed
when shutting down or logging off
If a USB device is connected, try removing it.
This message appears periodically; for example, when using a Wireless LAN. If the message appears, select [End Now]. Delete the check mark for [Show the tray icon] in the
following menu.
Windows 2000
[Start] - [Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
Windows XP
[start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]
Others
Troubleshooting
Computer hangs
24
Press Ctrl + Shift + Esc to open Task Manager and close the software application
which is not responding.
After shutting down by pressing the power switch for more than four seconds, press the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
Windows 2000 : [Control Panel] - [Add/Remove Programs]
Windows XP
: [Control Panel] - [Add or Remove Programs]
Reinstalling Software
When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that is
on your hard disk before running the reinstall procedure.
The reinstall procedure will return the computer to its original condition.
• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.
Before Reinstallation
Preparing
You will need the Product Recovery CD-ROM.
Important
Before the reinstallation procedure, remove all peripherals.
Be sure the AC adaptor is connected until the reinstallation procedure is completed.
Reinstalling
1 Turn the computer off and set the CD drive in the multimedia pocket.
2 Turn the computer on, and immediately hold down F2 .
Release the key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and
then press F9 .
At the confirmation message, select [Yes] and then press
Enter .
4 Select [Boot] menu, then select [CD Drive] and press F6
until [CD Drive] is at the top of the [Boot] menu.
8 Select [1. Yes, I agree to the provisions above and wish to
continue!].
This screen should appear.
Windows 2000
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. Restore Windows(R) 2000 Professional to the whole HDD.
2. Make two partitions, for the operating system and data. And restore
Windows(R) 2000 Professional to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Restore Windows(R) 2000 Professional to the first partition.
4. End
---------------------------------------------------------------------
Windows XP
--------------------------------------------------------------------Select a number
6 Press F10 .
At the confirmation message, select [Yes] and press
Enter .
The computer will restart, and this screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. Start restoring the operating system.
2. Erase the whole data on HDD for security.
3. End
---------------------------------------------------------------------
7 Select [1. Start restoring the operating system.].
The License Agreement screen should appear.
--------------------------------------------------------------------1. Restore Windows(R) XP Professional to the whole HDD.
2. Make two partitions, for the operating system and data. And restore
Windows(R) XP Professional to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Restore Windows(R) XP Professional to the first partition.
4. End
---------------------------------------------------------------------
9 Make a selection from the menu.
When selecting [2], enter the basic partition size for
the operating system installation and press Enter .
(The data partition size is the remainder after subtracting the basic partition size.)
To select [3], the initial partition size must be 6 GB or
more of the hard disk size. Reinstallation cannot be performed with a small partition size.
Troubleshooting
5 Place the disc number one of the recovery CDs into the
CD drive.
25
Reinstalling Software
10 At the confirmation message, press Y .
The operation of reinstallation for the hard disk starts automatically. (The operations take about 15 minutes.)
CAUTION
Do not cancel the reinstall procedure before it is
completed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message “The media does not contain the correct file” appears, select [OK]. A message will appear instructing you to insert the next CD.
Confirm that the proper recovery CD has been inserted by opening the tray of the CD drive and then
close the tray, then select [OK].
11 After the reinstallation procedure completes, the following message will appear on the display.
Remove the recovery CD.
Windows 2000
Windows(R) 2000 Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete).
Windows XP
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete).
Troubleshooting
12 Restart the computer by pressing Ctrl + Alt +
Del and immediately hold down F2 . Release the
key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Password.
13 Press F9 .
At the confirmation message, select [Yes] and then press
Enter . (The Setup Utility settings will return to their
default values. Even the security settings with the exception of the password(s) will return to their default values.)
14 Press F10 .
At the confirmation message, select [Yes] and press
Enter .
15 Perform the setup procedure for Windows by following
the instructions on the screen.
Windows 2000
Page 11
Windows XP
Page 12
16 Run the Setup Utility and change the settings where necessary.
26

You can change the drive letter for the CD drive or hard disk
drive by the following steps.
Drive letters can only be changed when two or more partitions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
We recommend that you make these changes before installing applications.
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Administrative Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path...].
4 Select [Edit].
5 Select [Assign a drive letter] and select the new drive letter, and then select [OK].
6 At the confirmation message, select [Yes].
Windows XP
1 Select [Start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths...].
4 Select [Change].
5 Select [Assign the following drive letter] and select the
new drive letter, and then select [OK].
6 At the confirmation message, select [Yes].
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”)
ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH
THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED
TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses
their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to
achieve your intended results, and for the installation, use and results obtained therefrom.
A.
LICENSE
MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in
accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only
a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title,
ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,
concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of
which title, ownership and rights shall remain with MEI or its suppliers.
B.
You may use the Programs only on the single Product which was accompanied by the Programs.
C.
You and your employees and agents are required to protect the confidentiality of the Programs. You may not
distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing
or otherwise, without the prior written consent of MEI.
D.
You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation
for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of
your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify,
or attempt to modify, the Programs.
E.
You may transfer the Programs and license them to another party only in connection with your transfer of the
single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you
must also transfer all copies, whether in printed or machine readable form, of every Program, and the related
documentation, to the same party or destroy any such copies not so transferred.
F.
You may not remove any copyright, trademark or other notice or product identification from the Programs and
you must reproduce and include any such notice or product identification on any copy of any Program.
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND
BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,
ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.
About Intel® software products
The enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTED
RIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and
DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of
Intel's proprietary rights in the product.
Appendix
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate
this license at any time by destroying, at your expense, the Programs and related documentation together with all
copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions
therefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon
any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all
copies thereof in any form.
27
Hard Disk Data Erase Utility
This computer is equipped with a utility for completely erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
data following the steps below.
The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data
that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a
company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or
damages suffered as a result of the use of this utility.
Preparing
You will need the Product Recovery CD-ROM.
NOTE
Be sure the AC adaptor is connected until the procedure is completed.
This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks.
This utility cannot erase data from damaged disk.
This utility cannot erase data for specific partitions.
After executing this utility, the computer cannot be booted from the hard disk.
Procedure
1 Turn the computer on, and immediately hold down F2 . Release the key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Password.
2 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of [Boot] menu.
3 Place the disc one of the recovery CDs into the CD drive.
4 Press F10 .
At the confirmation message, select [Yes] and press Enter .
The computer will restart, and this screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. Start restoring the operating system.
2. Erase the whole data on HDD for security.
3. End
---------------------------------------------------------------------
5 Select [2. Erase the whole data on HDD for security.].
6 At the confirmation message, press Y .
7 At the start menu, press
Enter .
8 The time required for erasing data will be displayed.
Press Space .
Appendix
9 At the confirmation message, press Enter .
The operation of erasing the hard disk starts.
28
10 After the operation is complete:
Under normal conditions, the message [Hard disk data has been deleted.] will be displayed.
If a problem occurred during the operation, an error message will be displayed.
11 Remove the Product Recovery CD-ROM, then turn off the computer by using the power switch.
WinDVD™

WinDVD™ (hereafter, WinDVD) is a software application for DVD playback.
Here, you will find explanations and general information on the installation procedure and how to access the online manual.
Installing WinDVD
CAUTION
Close all other software application before running the Setup program for WinDVD for added safety.
Log on as the administrator.
1 Set the WinDVD CD-ROM in the CD drive.
The WinDVD setup program will run automatically (allow some time for disc recognition). When the setup program will
not run automatically, input [x:\setup] in [Start] - [Run] and select [OK]. (“x”is the drive letter. You can change the letter to
suit your preference.)
2 Select [Next] at the Welcome Message.
3 After reading the “License Agreement”*, select [Yes] if you agree to the terms.
* Refer to the “LIMITED USE LICENSE AGREEMENT” (
page 27)
4 Follow the on-screen instructions and install WinDVD.

To run WinDVD, it is necessary to make the following settings.
1 Windows 2000 Select [Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manager].
Windows XP
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
2 Double-click [Primary IDE Channel] for [IDE ATA/ATAPI controllers].
3 Select [Advanced Settings], and confirm that [Transfer Mode] is set to [DMA if available] for [Device 0].
4 Double-click [Secondary IDE Channel] for [IDE ATA/ATAPI controllers] and perform as the step
Running WinDVD
Windows 2000
Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select
on the desktop.
Windows XP
Select [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select
on the desktop.

Select “?” of the WinDVD control panel.
Do not enter the standby or hibernation mode while WinDVD is running.
Do not start WinDVD while the hard disk drive indicator is blinking immediately after the computer was started up.
If you maximize the video display window, you can return to the original window size by double-clicking over the
images.
During video playback (while the access lamp is on), do not eject the disc.
Do not use other applications or the Command Prompt, and do not change the settings of the screen properties.
In some cases, when the number of colors for the display is increased, a message appears and the DVD cannot be played.
If this happens, reduce the number of display colors.
Immediately after resuming from a pause, frame dropping may occur depending on the operating environment or DVD
video (images or sounds are disrupted).
In the Extended Desktop (Dualview) or simultaneous (internal/external) display mode, there are times when images or
video are not displayed correctly.
During a prolonged period of rapid advance, the pause mode may be established at some point. If this happens, exit
WinDVD, and restart.
Appendix
NOTE
29
WinDVD™
About Regions Setting
The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the
region code of the player software and of the drive must match that of the DVD-Video.

For U.S.A. and Canada: “1”
For Europe: “2”
The region code is not set prior to the shipment of this drive. Therefore, operations will differ depending on the first DVDVideo played.
In the case of a DVD-Video with a specific region code:
The drive will automatically be set with the same region code as the DVD-Video.
In the case of any other DVD-Video:
[Confirm Region] appears. Select region code and select [OK]. Play now begins.
([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current region code and the number of
settings remaining, right-click on the WinDVD screen and select [Setup]-[Region].)
NOTE
[Confirm Region] will also be displayed if a DVD-Video with one region code is inserted into a drive for which another
region code has already been set.
CAUTION
The region code can be set a total of five times, including the initial setting. Proceed very carefully, because after the fourth
change has been made, the region code set last is fixed and no further changes can be made.
The user must take responsibility for any trouble that results from illegally changing or altering the region code.
Information
Appendix
Inquires about WinDVD should be made to InterVideo, Inc.
InterVideo, Inc.
URL: http://www.intervideo.com/
E-mail: support@intervideo.com
30
B’s Recorder/B’s CLiP

“B’s Recorder GOLD5” (hereafter, B’s Recorder) and “B’s CLiP” are CD and DVD recording software applications developed by
B.H.A Corporation.
Here, explanations are given on general information about B’s Recorder and B’s CLiP, the installation procedure, and how to
access the online manual. Refer to the online manual concerning the detailed use of the software application (
page 32).
Applicable Media
CD-R* (one-time recordable CD media)
CD-RW (rewritable CD media)
* Applicable only for B's Recorder. It cannot be used for B's CLiP.
Before Installing the Software
Windows 2000
Uninstall Adaptec CD-Burning Plug-in.
1 Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs].
2 Select [Windows Media Player 7] - [Change/Remove].
3 Select [Remove Windows Media components] and select [Next].
4 Select [Adaptec CD-Burning Plug-in] from the components list, and select [Next].
5 If the [Windows Media setup is now ready to uninstall] message appears, select [Next].
6 Select [Finish] and restart the computer.
Windows XP
Select [(X:)]* in [start] - [My Computer] with the right button, select [Properties] - [Recording], then delete the check mark for [Enable
CD recording on this drive].
(Delete the check mark for [Enable CD recording on this drive] every time a new user is added.)
* “X” is the drive letter. You can change the letter to suit your preference.
Installing the Software
CAUTION
1 Set “B’s Recorder GOLD/B’s CLiP” disc in the drive.
[B.H.A setup launcher] screen will appear (allow some time for disc recognition). When the setup program will not run automatically, input [X:\Setuputil.exe]*1 in [Start]*2 - [Run] and select [OK].
Windows 2000
At the message, select [OK].
2 Select [B’s Recorder GOLD5] and follow the on-screen instructions.
During the course of the installation process, you will be asked to input a serial number. Input the serial number marked on the
sticker and the disc.
3 Upon completion of the installation, select [Yes, I want to restart my computer now], then select [Finish]. The computer will
restart.
4 Input [X:\Setuputil.exe]*1 in [Start]*2 - [Run] and select [OK].
[B.H.A setup launcher] screen will appear.
Windows 2000
At the message, select [OK].
5 Select [B’s CLiP] and follow the on-screen instructions.
During the course of the installation process, you will be asked to input a serial number. Input the serial number marked on the
sticker and the disc.
6 Upon completion of the installation, select [Yes, I want to restart my computer now], then select [Finish]. The computer will
restart.
Appendix
Close all other software application before running the Setup program for B’s Recorder and B’s CLiP for added safety.
Log on with the administrator authority.
Take care not to lose the serial number.
*1 “X” is the drive letter. You can change the letter to suit your preference.
*2 Windows XP : [start]
31
B’s Recorder/B’s CLiP
CAUTION
You cannot eject the disc by using the eject button on the drive while the indicator ( ) is displayed on the taskbar. To eject
the disc in this case, move the cursor to the indicator and right-click it to select [Eject].
Do not eject discs in any other way except the one described above.
When formatting a disc with B’s CLiP, right-click
or
to select [Format]. Do not select [My computer].
After formatting the disc, eject it then re-insert before using it.
When settings are changed using the following method, only a user with administrator authority can make the settings:
Select the CD drive icon or the B’s CLiP icon on the Taskbar with the right button, and select [Properties] - [B’s CLiP Page
Settings].
Windows 2000
If CD/DVD media with B’s CLiP format is removed while the content of that media is displayed in Explorer, the contents
of the media may remain displayed in Explorer even after the media is removed. This will not affect the computer’s
operation. When another CD/DVD media is inserted, the Explorer display will be updated.
Windows XP
Do not use the Fast User Switching function.
If this function is used, the icon ( ) will no longer be shown on the user taskbar after the switching is complete. (If this
happens, log off of Windows, and return to the original user.)
How to access the Online Manual
B’s Recorder
Windows 2000 : Select [Start] - [Programs] - [B.H.A] - [B’s Recorder GOLD5] - [User’s Manual].
Windows XP
: Select [start] - [All Programs] - [B.H.A] - [B’s Recorder GOLD5] - [User’s Manual].
B’s CLiP
Windows 2000 : Select [Start] - [Programs] - [B.H.A] - [B’s CLiP] - [User’s Manual].
Windows XP
: Select [start] - [All Programs] - [B.H.A] - [B’s CLiP] - [User’s Manual].
Information
If B’s Recorder and B’s CLiP do not operate properly, we recommend carefully reading the online help file first for problems
with the operating environment or operations.
If you still cannot troubleshoot the problem, contact B.H.A (
described below).
About Copies
When writing to discs, make sure that you are not infringing any copyrights.
It is illegal to copy audio CDs for non-personal use.
When backing up software, make sure that you are not infringing any software copyrights for that product.
SUPPORT INFOMATION
Appendix
Inquires about B’s Recorder and B’s CLiP should be made to B.H.A.
URL: http://www.bhacorp.com/support/
http://www.bha.co.jp/support/ (Japanese)
32
area
U.S./Canada/Australia
Europe
Asia
language
English, French (Canada)
English, German, French
Chinese
e-mail
winntsupport@bhacorp.com
eurosupport@bhacorp.com
asiasupport@bhacorp.com
Names and Functions of Parts
The illustrations shown may differ from the actual physical appearances.
LED Indicators
“LED Indicators”)
Caps Lock
Numeric key (NumLk)
Scroll lock (ScrLk)
CD drive status*
Floppy disk drive status
Hard disk drive status
Power status
LCD
Function Keys
For information on the key combinations available.
“Key Combinations”).
* The access lamp on the CD drive lights at
the same time as this indicator. (In some cases,
only one of them may light.)
Power Switch
Before using the computer for the first time,
carefully read the [Limited Use License
Agreement]. If you agree to the conditions,
remove the seal.
CD Drive
“CD Drive”)
Floppy Disk Drive
Speakers
To adjust the volume:
Fn + F5 / Fn + F6
Speaker on/off : Fn + F4
Security Lock LOCK
A Kensington cable can be connected to prevent theft of your
computer. For more information, please read the manual that
comes with the cable.
Touch Pad
page 17)
Headphone Jack
Use this connector to connect
headphones or amplifier-equipped
speakers. Audio output from the
internal speaker is disabled when
headphones or external speakers
are connected.
PC Card Slots
“PC Cards”)
LED Indicators
“LED Indicators”)
Power status
Battery pack status
Microphone Jack
Use only a monaural condenser microphone.
Using an input source other than a monaural
condenser microphone may not allow audio to
be input or may damage the equipment.
Appendix
33
Names and Functions of Parts
Parallel Port
“Printer”)
USB Ports
“USB Devices”)
DC-IN Jack
External Keyboard/Mouse Port
External Display Port
“External Display”)
Serial Port
Ventilation Hole
These holes allow heat to exit.
CAUTION
Do not block or place the computer in a location that may prevent proper ventilation.
LAN
“LAN”)
Modem
“Modem”)
CAUTION
This cover is not to be opened by anyone
except authorized service personnel.
Expansion Bus Connector
“Port Replicator”)
Battery Pack
“Battery Power”)
Hard Disk Drive
“Hard Disk Drive”)
Appendix
RAM Module Slot
“RAM Module”)
34
A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie
au lithium-ion. Pour des renseignements sur le recyclage de la
batterie, veuillez composer le 1-800-8-BATTERY.
Specifications
This page provides the specifications for the basic model CF-48E4KFUDM/CF-48E4KFUKM. The model number will change
depending on the configuration of the unit, such as, CPU speed, memory size, HDD size, Operating System, LCD type, and
whether a DVD-ROM drive, a DVD-ROM&CD-R/RW drive or DVD Multi drive is included or not.
To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase.
To check CPU speed, memory size and the hard disk drive (HDD) size:
Run the Setup Utility (
“Setup Utility”) and select [Information] menu.
Confirm the required information by checking the following items.
CPU speed:
[CPU Speed]
Memory size:
[System Memory]
Hard disk drive size:
[Primary Master]
Main Specifications
Model No.
CPU
Memory (Expandable to)
Video Memory
LCD
Type
Displayed Colors*1
External Display
Hard Disk Drive
Operating System
CF-48E4KFUDM
CF-48E4KFUKM
Intel® Pentium® M Processor 1.4 GHz
L2 (Second) Cache Memory: 1 MB
256 MB (768 MB Max. )
64 MB
14.1 type (TFT)
256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024x768 dots)
256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024x768 dots/1280 x 1024
dots/1600 x 1200 dots/2048x1536 dots)*2
40 GB*3
Microsoft® Windows® 2000 professional
Microsoft® Windows® XP professional
with Service Pack 3
with Service Pack 1
*1 A 16 M color display is achieved by using the dithering function.
Windows XP : 256 color depth and the resolution of 640 × 480 are not supported.
Windows 2000 : Setting 256 color depth or the resolution of 640 × 480 is not recommended.
*2 Maximum resolution depends on the specifications of the external display.
Windows XP : 256 color depth and the resolution of 640 × 480 are not supported.
Windows 2000 : Setting 256 color depth or the resolution of 640 × 480 is not recommended.
*3 1GB = 109 bytes
Other Specifications
Slots
Interface
87 keys
PC Card Slots
RAM Module Slot*4
Parallel Port
External Display Port
Serial Port
Microphone Jack* 5
Headphone Jack
External Keyboard/
Mouse Port
Expansion Bus
Connector
USB Port
Modem
LAN
Wireless LAN
Two Type I or Type II, or one Type III
Allowable current 3.3 V: 400 mA, 5 V: 400 mA (total for two slots)
200-pin, SO-DIMM, DDR-SDRAM, PC2100 Compliant
Dsub 25-pin female
Mini Dsub 15-pin female
Dsub 9-pin male
Miniature jack, 3.5 DIA
Miniature jack, 3.5 DIA
Impedance 32 Ω, Output Power 4 mW x 2
Mini DIN 6-pin female
Dedicated 100-pin female
4-pin x 2, USB 2.0
RJ-11 Data: 56 kbps (V.92 & K56flex) FAX:14.4 kbps
RJ-45
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
802.11b
Appendix
Keyboard
* 4 Only a RAM card designed for PC2100 can be added.
* 5 Use only a monaural condenser microphone.
35
Specifications
Other Specifications
Pointing Device
Speaker
Utility Programs
Sound
Floppy Disk Drive
Optical Disc
DVD-ROM Drive
DVD-ROM &
CD-R/RW Drive
DVD Multi Drive
Battery
Battery Pack
Clock Battery
AC adaptor*7
Power Consumption*8
Environment
Appendix
Physical Dimensions (W X H X D)
Weight
*1
*2
*3
*4
*5
*6
*7
*8
*9
36
Touch Pad
Stereo Speaker
Setup Utility, DMI Viewer, Adobe® Acrobat® Reader, Hard Disk Data Erase Utility*1
WAVE and MIDI playback
720 KB/1.44 MB (two-mode)
Supports
DVD-ROM
DVD-5, DVD-9, DVD-10, DVD-18, DVD-R*2(3.95 GB, 4.7
GB), DVD-RW*2 (4.7 GB), DVD-RAM*2*3 (2.6 GB, 4.7 GB)
CD-ROM
CD-Audio, CD-ROM, CD-R*2, Photo CD, VideoCD, Enhanced Music CD, CD-RW*2, CD-TEXT
DVD-ROM read*4
8x speed (Max.)
CD-ROM read*
24x speed (Max.)
Supports
DVD-ROM
DVD-5, DVD-9, DVD-10, DVD-18, DVD-R*2(3.95 GB, 4.7
GB), DVD-RW*2 (4.7 GB), DVD-RAM*2*3 (2.6 GB, 4.7 GB),
DVD+R*2, DVD+RW*2
CD-ROM
CD-Audio, CD-ROM, CD-R, Photo CD, VideoCD, Enhanced
Music CD, CD-RW, CD-TEXT
DVD-ROM read*
8x speed (Max.)
CD-ROM read*4
24x speed (Max.)
CD-R write*5
4x speed, 8x speed, 16x speed (Max.), 24x speed (Max.)
CD-RW write
4x speed, 8x speed, 10x speed
Supports
DVD-ROM
DVD-5, DVD-9, DVD-10, DVD-18, DVD-R*2(3.95 GB, 4.7
GB), DVD-RW*2 (4.7 GB), DVD-RAM*2*3 (2.6 GB, 4.7 GB)
CD-ROM
CD-Audio, CD-ROM, CD-R, Photo CD, VideoCD, Enhanced
Music CD, CD-RW, CD-TEXT
CD-ROM read*4
24X speed (Max.)
DVD-ROM read*
8X speed (Max.)
CD-R write*5
4X speed, 8X speed, 16X speed (Max.)
CD-RW write
4X speed, 8X speed
DVD-R write
1X speed
DVD-RW write
1X speed
DVD-RAM write
2X speed
Li-ion 11.1 V, 6.3 Ah
Operating Time*6 Approx. 1.5 hours - 3.2 hours
Charging Time*6
Power On
Approx. 3.0 hours
Power Off
Approx. 3.0 hours
Coin type lithium battery 3.0 V
Input
100 V - 240 V AC, 50 Hz/60 Hz
Output
15.6 V DC, 5.0 A
Approx. 70 W* / Approx. 90 W (maximum when recharging in the ON state)
In use
Temperature
5 °C to 35 °C {41 °F to 95 °F}
Humidity
30% to 80% RH (No condensation)
Not in use Temperature
-20 °C to 60 °C {-4 °F to 140 °F}
Humidity
30% to 90% RH (No condensation)
307 mm X 45 mm X 260 mm {12.1 " X1.8 " X 10.2 "}
Approx. 3.4 kg {Approx. 7.6 lb.}
The Product Recovery CD-ROM is required.
Read only.
In the case of DVD-RAM, only non-cartridge discs or removable cartridge discs can be used.
If an unbalanced disc (e.g., a disc with which the balance has been displaced from the center) is inserted, the speed may become slower if
there are large vibrations while the disc is rotating.
Depending on the disc, the writing speed may become slower.
Varies depending on the usage conditions.
The AC adaptor is compatible with power sources up to 240 V AC adaptor.
This computer is supplied with a 125 V AC compatible AC cord.
Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is OFF.
Approx. 1.5 W when the [Wake up from LAN] has been enabled.
Rated power consumption.
LIMITED WARRANTY
For U.S.A.
PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY
Panasonic Computer Solution Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate
warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials
or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a
period of one (1) year from the date of purchase.
This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before
warranty performance is rendered.
This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs
in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction
of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or
service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.
Limits and Exclusions:
There are no other express warranties except as listed below.
PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY
PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product
develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfaction, then write to the Consumer Affairs Division at the address indicated below.
SOFTWARE LIMITED WARRANTY
Panasonic Computer Solution Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs are
furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to
you, as evidenced by your purchase receipt.
This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free.
Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective
disk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid
warranty period.
Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the
Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise
than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of
God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any
Program.
DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.
PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE
OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT,
FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain service or technical assistance within the continental U.S.A. and Alaska.
DIAL TOLL FREE: 1-800-LAPTOP5
Appendix
This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.
Correspondence requesting product information should be sent to:
Panasonic Computer Solution Company
50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094
37
Memo
38
39
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has
determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
Outline of the International ENERGY STAR® Office Equipment Program
The international ENERGY STAR® Office Equipment Program is an international program
that promotes energy saving through the use of computers and other office equipment.
The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors
can participate voluntarily. The targeted products are office equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among
participating nations.
Panasonic Computer Solution Company
Panasonic Canada Inc.
50 Meadowlands Parkway, Panazip 2F-5,
Secaucus, NJ 07094
5770 Ambler Drive Mississauga,
Ontario L4W 2T3
© 2003 Matsushita Electric Industrial Co., LTD. All Rights Reserved.
Printed in Taiwan
TA0403-0
DFQX5401ZAT

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:04:09 01:28:41Z
Modify Date                     : 2003:04:09 11:18:11+09:00
Page Count                      : 40
Creation Date                   : 2003:04:09 01:28:41Z
Mod Date                        : 2003:04:09 11:18:11+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2003:04:09 11:18:11+09:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ACJ9TGCF-482

Navigation menu