Panasonic of North America 9TGCF-P11 Wireless LAN built in Personal Computer User Manual DFQX5299ZA pm6

Panasonic Corporation of North America Wireless LAN built in Personal Computer DFQX5299ZA pm6

Users manual

®Handheld ComputerSupplementary InstructionsThis Supplementary Instructions manual explains howto get started with a wireless LAN and point out caseswhere the operation of the computer will differ fromthat in the Operating Instructions.Wireless LANAntennaWireless LAN communications are done via an antenna. Do not shield this antenna withthe hand, etc. This will negatively effect the performance of your wireless LAN commu-nications.CF-P1 with Wireless LANNOTEInformation to the UserThis product and your HealthThis product, like other radio devices, emits radio frequency electromagnetic energy. Thelevel of energy emitted by this product however is far much less than the electromagneticenergy emitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in radio frequency safety standardsand recommendations, we believe this product is safe for use by consumers. These standardsand recommendations reflect the consensus of the scientific community and result from de-liberations of panels and committees of scientists who continually review and interpret theextensive research literature.In some situations or environments, the use of this product may be restricted by the proprietorof the building or responsible representatives of the organization. These situations may forexample include:Using this product on board of airplanes, orIn any other environment where the risk of interference to other devices or services isperceived or identified as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specificorganization or environment (e.g. airports), you are encouraged to ask for authorization touse this product prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interference caused by unauthorized modi-fication of this product. The correction of interference caused by such unauthorized modifi-cation will be the responsibility of the user. We and its authorized resellers or distributors arenot liable for damage or violation of government regulations that may arise from failing tocomply with these guidelines.
2Supplementary InstructionsRead Me First - For U.S.A.Replace as follows.Federal Communications Commission Radio Frequency InterferenceStatementNote: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the Panasonic Service Center or an experienced radio/TV technician for help.Safety NoticeDo not touch or move antenna while the unit is transmitting or receiving.Do not hold any component containing the radio such that the antenna is very close ortouching any exposed parts of the body, especially the face or eyes, while transmitting.Do not operate a portable transmitter near unshielded blasting caps or in an explosiveenvironment unless it is type especially qualified for such use.WarningTo assure continued compliance, use only shielded interface cables when connecting to acomputer or peripheral. Also, any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may causeundesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5(1-800-527-8675)FCC Radiation Exposure Statement:In order to comply with FCC RF exposure limits, it is recommended, when emitting radiatedpower, that the integrated antenna should not be positioned closer than 2 inches (5 cm) fromyour body or nearby persons for extended periods of time while it is transmitting (or operat-ing). If the antenna is positioned less than 2 inches (5cm) from the user, it is recommendedthat user exposure time be limited.
3First-time OperationAfter finishing the first-time operation, install the driver for Wireless LAN using thefollowing procedure.Install the driver for Wireless LAN(1)When the computer recognizes the internal Wireless LAN card, a screen will be displayeddesignating the driver name. Tap to close this screen.(2)Tap [Start]-[Run] in order, then input “ffrestore.exe r”, and then tap [OK].The driver for Wireless LAN will be copied from the Flash memory to the [Options]folder in [My Computer].(3)When [Complete] is displayed, press .(4)Install the driver for Wireless LAN.1) Double-tap [My Computer], and then double-tap the [Options] folder.2) Double-tap [Wireless LAN].3) A screen will be displayed specifying the install destination folder. Tap [OK].4) When [Setup Complete] is displayed, tap [OK].5) Push the reset switch using the stylus.When the computer is started up and the internal Wireless LAN card is correctly recognized,the [Symbol Status] screen will be displayed.When installation is complete, [Wireless LAN] will be automatically deleted from [My Com-puter].(5)Setting for Wireless LAN.Input the necessary information on the [SymbolStatus] screen.(ESSID and Operating Mode for the [Mode] tab,IP address for the [IP Config] tab, etc.)(6)Tap [OK].(7)Press the reset switch using the stylus.NOTEThe size of the [Symbol Status]screen cannot be changed. If partof this screen extends off of thescreen, drag the title bar to reposi-tion the window.Dealing with ProblemsWhen reinstalling thedriver for WirelessLAN, “File WriteError” is displayed.Check if the computer memory is full. If it is full, deleteunnecessary files.Check if the [Options] folder in [My Computer] has beendeleted. If it has been deleted, recreate the [Options] folderin [My Computer] as follows:(1)Double tap [My Computer], tap [File], and then tap [NewFolder].(2)Input “Options” for new folder name.
© 2002 Matsushita Electric Industrial Co., LTD. All Rights Reserved.Printed in JapanFJ0202-0DFQX5299ZAPanasonic Computer Solution Company,50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094Panasonic Canada Inc.5770 Ambler Drive Mississauga,Ontario L4W 2T3SpecificationsAdd the following information.Wireless LAN IEEE 802.11b compliant, Frequency 2.4GHz bandPhysical Dimensions 98 mm x 41 mm x 203 mm {3.9 " x 1.6 " x 8.0 "}(W x H x D) (excluding the strap)Weight Approx. 552 g {Approx. 1.2 lb.} (excluding the strap)

Navigation menu