Panasonic of North America 9TGCF-W41 Personal Computer CF-W4 Series User Manual Operating Instructions

Panasonic Corporation of North America Personal Computer CF-W4 Series Operating Instructions

PC User Manual

Contents
Preparations Page
Getting Started (Basic Operations)
Troubleshooting
Useful Information
Important Information
Preparations
Getting Started
Useful Information
Troubleshooting
Important Information
OPERATING INSTRUCTIONS
Personal Computer
Model No. CF-W4 Series
XP
Read Me First .............................................................. 3
Usage Precautions/About Notations......................... 11
How to Use This Manual........................................... 12
Features.................................................................... 13
Names and Functions of Parts ................................. 14
Confirm the Status Using the LEDs.......................... 16
First-time Operation .................................................. 17
Starting Up/Shutting Down ....................................... 23
Using the Touch Pad................................................. 26
Using the Fn Key ...................................................... 28
Expanding Memory................................................... 29
Setup Utility............................................................... 31
Usage / Handling / Maintenance............................... 38
Wireless LAN ............................................................ 40
Windows/Antivirus Protection ................................... 41
Using CD/DVD .......................................................... 44
Use of Peripheral Devices/Internal Hard Disk........... 45
When Disposing of This Computer ........................... 46
List of Error Codes.................................................... 47
Dealing with Problems (Summary) ........................... 48
Information for Installed Applications........................ 56
Reinstalling Software ................................................ 57
LIMITED USE LICENSE AGREEMENT ................... 62
Hard Disk Backup Function ...................................... 64
Hard Disk Data Erase Utility ..................................... 69
Specifications............................................................ 72
Index ............................................................. back cover
For first-time and basic opera-
tion, refer to the Operating
Instructions (this manual).
For more information on how
to use this computer, refer to
the onscreen Reference Man-
ual.
Î page 12
For your technical support
office, refer to “LIMITED WAR-
RANTY.
2
1
2
*1 For the Model No., insert the 12 digit number (for example, CF-W4FWCZZBM) located on the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read this manual thoroughly for proper operation of your new computer.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be repro-
duced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liabil-
ity for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other
countries.
Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.
SD Logo is a trademark.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
WinDVD is a trademark of InterVideo, Inc.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner compa-
nies.
Customer’s Record
Model No.*1
Serial No.
or
Code No.
Date of Purchase
Dealer’s Name
Dealer’s Address
3
Preparations
Read Me First
For U.S.A.
Federal Communications Commission Radio Fre-
quency Interference Statement
Note: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,
may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and
receiver.
zConnect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
zConsult the Panasonic Service Center or an experi-
enced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded inter-
face cables when connecting to a computer or peripheral.
Also, any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
FCC RF Exposure Warning:
zThis equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
zThis equipment must be installed and operated in
accordance with provided instructions and minimum
1.5 cm spacing must be provided between antenna
and all person’s body (excluding extremities of hands,
wrist and feet) during wireless modes of operation.
zThis transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
zThis computer is provided with a PC Card slot that
could be used with wireless transmitter(s), which will
be specifically recommended, when they become
available. Other third-party wireless transmitter(s) have
not been RF exposure evaluated for use with this com-
puter and may not comply with FCC RF exposure
requirements.
This product is restricted to indoor use due to its operation
in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the fre-
quency range 5.15 to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile Satellite sys-
tems.
High power radars are allocated as primary users of the
5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and /or dam-
age this product.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired oper-
ation.
Responsible Party: Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
1. This equipment complies with CFR47 Part 68 rules.
On the computer is a label that contains, among other
information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If
required, this information must be provided to the tele-
phone company.
2. An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is
designed to be connected to the telephone network or
premises wiring using a compatible modular jack
which is Part 68 compliant. See Installation Instruc-
tions for details.
3. The REN is used to determine the quantity of devices
which may be connected to the telephone line. Exces-
sive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all area, the sum of RENs should not
exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as deter-
mined by the total RENs, contact the local telephone
company.
4. If your telephone equipment cause harm to the tele-
phone network, the telephone company will notify you
in advice that temporary discontinuance of service
may be required. But if advice notice isn’t practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
5. The telephone company may take changes in its facili-
ties, equipment, operations or procedures that could
affect the operation of the equipment. If this happens
the telephone company will provide advance notice in
order for you to make necessary modifications to main-
tain uninterrupted service.
Read Me First
4
Getting Started
Preparations
6. If trouble is experienced with this equipment, for repair
or warranty information, please contact Panasonic
Corporation of North America at DIAL TOLL FREE 1-
800-LAPTOP5 (1-800-527-8675). If the equipment is
causing harm to the telephone network, the telephone
company may request that you disconnect the equip-
ment until the problem is resolved.
7. There are no user serviceable parts contained in this
equipment.
8. This equipment may not be used on coin service pro-
vided by the telephone company. Connection to party
lines is subject to state tariffs.
9. The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer or
other electronic device to send any message via a tele-
phone fax machine unless such message clearly con-
tains in a margin at the top or bottom of each
transmitted page or on the first page of the transmis-
sion, the date and time it is sent and an identification of
the business or other entry, or other individual sending
the message and the telephone number of the sending
machine or such business, other entity, or individual. In
order to program this information into your fax soft-
ware, you should refer to the manual of the Fax soft-
ware being used.
10.According to the FCC’s electrical safety advisory, we
recommend that you may install an AC surge arrestor
in the AC outlet to which this equipment is connected.
Telephone companies report that electrical surges,
typically lightning transients, are very destructive to
customer terminal equipment connected to AC power
sources and that this is a major nationwide problem.
“Caution: To reduce the risk of fire, use only No.26 AWG or
larger telecommunication line cord.
“ATTENTION: Pour réduire le risque d’incendie, utiliser
uniquement des conducteurs de télécommunications 26
AWG ou de section supérieure.
Notice for the products using LCD
This product uses one or more fluorescent lamps contain-
ing a small amount of mercury. It also contains lead in
some components. Disposal of these materials may be
regulated in your community due to environmental consid-
erations. For disposal or recycling information please
contact your local authorities, or the Electronics Industries
Alliance: <http://www.eiae.org/>
For Canada
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved
modem unit.
The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment
meets telecommunications network protective, opera-
tional and safety requirements as prescribed in the appro-
priate Terminal Equipment Technical Requirements
document(s). The Department does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that
it is permissible to be connected to the facilities of the
local telecommunications company. The equipment must
also be installed using an acceptable method of connec-
tion. The customer should be aware that compliance with
the above conditions may not prevent degradation of ser-
vice in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equip-
ment malfunctions, may give the telecommunications
company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the elec-
trical ground connections of the power utility, telephone
lines and internal metallic water pipe system, if present,
are connected together. This precaution may be particu-
larly important in rural areas. Caution: Users should not
attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or
electrician, as appropriate. “NOTICE: The Ringer Equiva-
lence Number (REN) assigned to each terminal device
provides an indication of the maximum number of termi-
nals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combi-
nation of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5.
REN: See bottom of the computer
RESTRICTIONS CONCERNANT LE RACCORDEMENT
DE MATÉRIEL
"AVIS: L'étiquette d'Industrie Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est
conforme aux normes de protection, d'exploitation et de
sécurité des réseaux de télécommunications, comme le
prescrivent les documents concernant les exigences tech-
niques relatives au matériel terminal. Le Ministère
n'assure toutefois pas que le matériel fonctionnera à la
satisfaction de l'utilisateur.
Avant d'installer ce matériel, l'utilisateur doit s'assurer qu'il
est permis de le raccorder aux installations de l'entreprise
locale de télécommunication. Le matériel doit également
être installé en suivant une méthode acceptée de raccord-
ement. L'abonné ne doit pas oublier qu'il est possible que
la conformité aux conditions énoncées ci-dessus
n'empêche pas la dégradation du service dans certaines
situations.
Les réparations de matériel homologué doivent être coor-
données par un représentant désigné par le fournisseur.
5
Preparations
L'entreprise de télécommunications peut demander à
l'utilisateur de débrancher un appareil à la suite de répa-
rations ou de modifications effectuées par l'utilisateur ou à
cause de mauvais fonctionnement.
Pour sa propre protection, l'utilisateur doit s'assurer que
tous les fils de mise à la terre de la source d'énergie
électrique, des lignes téléphoniques et des canalisations
d'eau métalliques, s'il y en a, sont raccordés ensemble.
Cette précaution est particulièrement importante dans les
régions rurales. Avertissement: L'utilisateur ne doit pas
tenter de faire ces raccordements lui-même; il doit avoir
recours à un service d'inspection des installations élec-
triques, ou à un électricien, selon le cas."
"AVIS: L'indice d'équivalence de la sonnerie (IES) assigné
à chaque dispositif terminal indique le nombre maximal
de terminaux qui peuvent être raccordés à une interface.
La terminaison d'une interface téléphonique peut consis-
ter en une combinaison de quelques dispositifs, à la seule
condition que la somme d'indices d'équivalence de la son-
nerie de touts les dispositifs n'excède pas 5."
IES: Voir sous le fond de l'ordinateur
Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This product (local network devices) for the band 5150-
5250 MHz is only indoor usage to reduce potential for
harmful interference to co-channel Mobile Satellite sys-
tems.
High power radars are allocated as primary users (mean-
ing they have priority) of 5250-5350 MHz and 5650-5850
MHz and these radars could cause interference and/or
damage to LELAN devices.
Important Safety Instructions / Importantes Mesures De Sécuri
When using your telephone equipment, basic safety pre-
cautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the fol-
lowing:
1. Do not use this product near water, for example, near a
bath tub, washbowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the
vicinity of the leak.
4. Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
Certaines mesures de sécurité doivent être prises pen-
dant l’utilisation de matérial téléphonique afin de réduire
les risques d’incendie, de choc électrique et de blessures.
En voici quelquesunes:
1. Ne pas utiliser l’appareil près de l’eau, p.ex., près
d’une baignoire, d’un lavabo, d’un évier de cuisine,
d’un bac à laver, dans un sous-sol humide ou près
d’une piscine.
2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appar-
eil sans fil) pendant un orage électrique. Ceci peut
présenter un risque de choc électrique causé par la
foudre.
3. Ne pas utiliser l’appareil téléphonique pour signaler
une fuite de gaz s’il est situé près de la fuite.
4. Utiliser seulement le cordon d’alimentation et le type
de piles indiqués dans ce manual. Ne pas jeter les
piles dans le feu: elles peuvent exploser. Se conformer
aux règlements pertinents quant à l’élimination des
piles.
CONSERVER CES INSTRUCTIONS
Read Me First
6
Getting Started
Preparations
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this
product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile
phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations,
we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of
the scientific community and result from deliberations of panels and committees of scientists who continually review and
interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or respon-
sible representatives of the organization. These situations may for example include:
zUsing this product on board of airplanes, or
zIn any other environment where the risk of interference to other devices or services is perceived or identified as
harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment
(e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product. The
correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its
authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from
failing to comply with these guidelines.
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only
be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et
l’heure. La pile ne doit être remplacée que par un technicien qualifié.
Danger! Risque d’explosion en cas de non respect de cette mise en garde!
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS, ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-
SELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
AVERTISSEMENT!
CET APPAREIL UTILISE UN LASER.
L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU
L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES
SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSI-
TION À DES RADIATIONS DANGEREUSES.
NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE
RÉPARER SOI-MÊME.
CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSON-
NEL QUALIFIÉ.
Lithium Battery
DVD-ROM & CD-R/RW Drive Caution
7
Preparations
Usage
Avoid Extreme Heat and Cold
Do not store or use the computer in loca-
tions exposed to heat, direct sunlight, or
extreme cold.
Avoid moving the computer between
locations with large temperature differ-
ence.
Operation: 5 °C to 35 °C {41 °F to 95 °F}
Storage: -20 °C to 60 °C {-4 °F to 140 °F}
Avoid Direct Sunlight on the LCD Panel
The LCD panel should not be exposed to
direct sunlight or ultraviolet light.
Avoid Humidity, Liquids and Dust
Do not store or use the computer in loca-
tions exposed to high humidity, liquids
(including rain) or dust.
Prevent Shock
Avoid subjecting the computer to severe
vibrations or impact. Do not place the
computer inside a car trunk.
Avoid Radio Frequency Interference
Do not place the computer near a televi-
sion or radio receiver.
Avoiding Low-temperature Burns*1
Avoid more than casual contact with any
heat producing area of the notebook
computer, AC adaptor, and any option or
accessory you use with it. Even low heat,
if warmer than body temperature, can
cause a burn, if the skin is exposed to the
heat source for a long period of time.
Do not touch the computer and cable
when it starts thundering
Keep SD memory cards and MultiMedia
Cards (both sold separately) away from
infants and small children
Accidental swallowing will result in bodily
injury.
In the event of accidental swallowing, see
a doctor immediately.
Do not connect a telephone line, or a
network cable other than the one spec-
ified, into the LAN port
If the LAN port is connected to a network
such as the ones listed below, a fire or
electric shock may result.
Networks other than 100BASE-TX or
10BASE-T
Phone lines (Telephone lines, internal
phone lines (on-premise switches), dig-
ital public phones, etc.)
Handling
Avoid Magnetic Fields
Keep the computer away from magnets.
Data stored on the hard disk may be lost.
Avoid Stacking
Do not place heavy objects on top of the
computer.
Do Not Disassemble the Computer
Do not disassemble the computer using
methods other than those shown in this
manual.
This computer contains high-voltage
parts, contact with which may result in
electrical shock. Modification or incorrect
disassembly may result in fire.
Avoid Excessive Force on the Display
Do not apply excessive downward force
on the display.
Precautions
*1 About low-temperature burns
Allowing one area of the skin to be in direct
contact with an object that is even slightly
warmer than body temperature for long
periods of time may result in a "low-tem-
perature burn."
Read Me First
8
Getting Started
Preparations
If a malfunction occurs, immediately
unplug the AC cord and the battery pack
Computer is damaged
Foreign object inside computer
Smoke emitted
Unusual smell emitted
Unusually hot
Continuing to use the computer while any
of the above conditions are present may
result in fire or electrical shock.
zIf a malfunction occurs, immediately
turn the power off and unplug the AC
cord and the battery pack.
Do not do anything that may damage
the AC cord, the DC plug, or the AC
adaptor
Do not damage or modify the cord, place
it near hot tools, bend, twist, or pull it
forcefully, place heavy objects on it, or
bundle it tightly.
Continuing to use a damaged cord may
result in fire, short circuit, or electrical
shock.
Clean the DC plug of dust and other
debris regularly
If dust or other debris accumulates on the
plug, humidity, etc. may cause a defect in
the insulation, which may result in a fire.
zPull the plug, and wipe it with a dry
cloth.
Pull the plug if the computer is not
being used for a long period of time.
Do not pull or insert the DC plug if
your hands are wet
May result in electrical shock.
Insert the AC plug completely
If the plug is not inserted completely, fire
due to overheating or electrical shock
may result.
zDo not use a damaged plug or loose
electrical socket.
Do not place metal objects or contain-
ers of liquid on top of the computer
zIf water or other liquid spills, or if paper
clips, coins, or other metal objects get
inside the computer, fire or electrical
shock may result.
Do not place the computer on unstable
surfaces
If balance is lost, the computer may fall
over or drop, resulting in an injury.
Do not move the computer while the
DC plug is connected
The AC cord may be damaged, resulting
in fire or electrical shock.
zIf the AC cord is damaged, remove the
DC plug immediately.
Hold the plug when unplugging the AC
cord
Pulling on the cord may damage the cord,
resulting in a fire or electrical shock.
Do not turn the volume up to loud
when using headphones
Listening at high volumes that overstimu-
late the ear for long periods of time may
result in loss of hearing.
Take a break of 10-15 minutes every
hour
Using the computer for long periods of
time may have detrimental health effects
on the eyes or hands.
Do not look into the DVD-ROM & CD-R/
RW drive
Looking directly at the internal laser light
source may result in damage to eyesight.
Do not use disks that are cracked or
deformed
Because the disks rotate at high speeds,
damaged disks may break apart causing
injury.
zDisks that are not round and disks that
have been repaired using adhesives
are similarly dangerous, and so should
not be used.
Do not cover the computer with a thick
cloth, such as a blanket
9
Preparations
Precautions (Wireless LAN)
Keep the computer at least 22 cm
{8.7”} away from heart pacemaker
devices
Pacemaker operations may be affected by
radio waves.
Turn off*1 inside of airplanes
Radio waves may obstruct the safe opera-
tions of the aircraft. Follow the instruc-
tions of the airline with regard to use on
airplanes.
Do not use near automatic doors, fire
alarms, and other automatic control
devices
Radio waves from this computer may
affect automatic control devices, resulting
in damage due to malfunctions.
Turn off*1 in hospitals and other loca-
tions with electrical medical devices
(do not bring into operating rooms,
intensive care units, CCUs*2, etc.)
Radio waves from this computer may
affect electrical medical devices, resulting
in damage due to malfunctions.
Turn off*1 in crowded areas, as per-
sons wearing heart pacemakers may
be nearby
Pacemaker operations may be affected by
radio waves.
*1 If it is necessary to use the computer in
these types of environments, turn the wire-
less LAN off using the following procedure.
Note, however, that use of computers even
while the wireless LAN is off may be pro-
hibited during takeoff and landings, and at
other times.
Double-click the (yellow icon), the
(red icon) or the (green icon)
on the notification area, click ٕ and click
[Wireless Off].
*2 CCU: Coronary Care Unit
Read Me First
10
Getting Started
Preparations
Precautions (Battery Pack)
zCare should be exercised with regard to the following
in order to avoid the possibility of overheating, fire or
damage.
Avoid Heat
Do not throw the battery pack into a fire or
expose it to excessive heat.
Keep Articles Away
Do not place the battery pack together
with articles such as necklaces or hair-
pins when carrying or storing.
Do Not Disassemble
Do not insert sharp objects into the battery
pack, expose it to bumps or shocks,
deform, disassemble, or modify it.
Do Not Short
Do not short the positive (+) and negative
(-) contacts.
Avoid Extreme Heat, Cold and Direct
Sunlight
Do not charge, use or leave the battery
pack for extended periods where it will be
exposed to direct sunlight, in a hot place
(in a car on a sunny day, for example), or
in a cold place.
Do not charge the battery using the
methods other than indicated in this
manual
Do not use this computer with a bat-
tery pack other than the one specified
(the one included with the computer or
the specified battery pack sold sepa-
rately)
Do Not Use With Any Other Computer
The battery pack is rechargeable and was
intended for the specified computer. Do
not use it with a computer other than the
one for which it was designed.
Do Not Put into a Microwave
Do not put the battery pack into a micro-
wave oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal
odor, become hot to the touch, become
discolored, change shape, or become in
any way different from normal, remove it
from the computer and stop using it.
zDo not touch the terminals on the battery pack. The
battery pack may no longer function properly if the
contacts are dirty or damaged.
zDo not expose the battery pack to water, or allow it to
become wet.
zIf the battery pack will not be used for a long period of
time (a month or more), charge or discharge (use) the
battery pack until the remaining battery level becomes
30% to 40% and store it in a cool, dry place.
zThis computer prevents overcharging of the battery by
recharging only when the remaining power is less than
approx. 95% of capacity.
zThe battery pack is not charged when the computer is
first purchased. Be sure to charge it before using it for
the first time. When the AC adaptor is connected to
the computer, charging begins automatically.
zShould the battery leak and the fluid get into your eyes,
do not rub your eyes. Immediately flush your eyes with
clear water and see a doctor for medical treatment as
soon as possible.
NOTE
zThe battery pack may become warm during
recharging or normal use. This is completely nor-
mal.
zRecharging will not commence if internal tempera-
ture of the battery pack is outside of the allowable
temperature range (0 °C to 55 °C {32 °F to 131
°F}). (Î "Chapter 2: Battery Power" in onscreen
Reference Manual) Once the allowable range
requirement is satisfied, charging begins automati-
cally. Note that the recharging time varies based
on the usage conditions. (Recharging takes longer
than usual when the temperature is 10 °C {50 °F}
or below.)
zIf the temperature is low, the operating time is
shortened. Only use the computer within the
allowable temperature range.
zThe battery pack is a consumable item. If the
amount of time the computer can be run by using a
particular battery pack becomes dramatically
shorter and repeated recharging does not restore
its performance, the battery pack should be
replaced with a new one.
zWhen transporting a spare battery inside a pack-
age, briefcase, etc., it is recommended that it be
placed in a plastic bag so that its contacts are pro-
tected.
zAlways power off the computer when it is not in
use. Leaving the computer on when the AC adap-
tor is not connected will exhaust the remaining bat-
tery capacity.
11
Preparations
Getting Started
Usage Precautions / About Notations
When closing the disk cover
zPress down near the power indicator (position of the arrow) to ensure that the
cover is locked.
zSome of the illustrations in this manual may differ slightly in shape from the actual
items on your computer. This should make the explanation easier to understand.
zIf a user has logged on to Windows without the Administrator Authority, some func-
tions may not be executable, and some screens may not be displayed as shown in
this manual.
If this happens, log-on to Windows with the Administrator Authority to enable these
functions.
zIn this manual, “Microsoft® Windows® XP Professional Service Pack 2 with
Advanced Security Technologies” is indicated as “Windows” or “Windows XP.
zIn this manual, the following software packages are described as follows:
"WinDVD™ 5 (OEM Version)" as "WinDVD"
"B's Recorder GOLD8 BASIC" as "B's Recorder"
"B's CLiP 6" as "B's CLiP"
zOptional Products or Accessories
Confirm the latest information on optional products or accessories from other
sources.
Usage Precautions
About Notations
Notations Meanings
NOTE NOTE provides a useful fact or helpful information.
CAUTION CAUTION indicates a condition that may result in minor or a moderate degree of injury.
Enter
This illustration means pressing the
Enter
key.
Fn
+
F5
This illustration refers to pressing and holding the
Fn
key, then pressing the
F5
key.
When using with the
Fn
and
Ctrl
functions interchanged (Îpage 33), read with
Fn
and
Ctrl
reversed.
[start] - [Run] This illustration tells you to click [start], then to click [Run].
Î This symbol indicates related pages.
12
PreparationsGetting Started
How to Use This Manual
The manual is saved in the computer's hard disk. To view the manual, start up the
computer after completing the settings for "First-time Operation" (Îpage 17).
zWhen the manuals in PDF format (see above) are accessed for the first time, the
License Agreement of the Adobe Reader may be displayed. If it is displayed, after
reading the agreement, click [Accept].
zRefer to Acrobat Reader Help to use the Acrobat Reader.
How to access the Reference Manual
1Click [start] then click [Reference Manual].
How to access the Important Tips
1Double-click the icon on the desktop.
Important Tips can also be accessed from [start] - [All Programs] -
[Panasonic] - [On-Line Manuals] - [Important Tips].
How to access Windows Help
1Log on to Windows with the administrator authority and
click [start] - [Help and Support].
Manual Types and Contents
Using the
hard copy Operating Instructions
(This manual) This manual explains startup methods and basic operations required
when using the computer for the first time.
Using the
onscreen
manual
Reference Manual
(PDF format)
The Reference Manual explains functions for you to make greater
use of the computer, such as how to add peripheral devices, how the
Setup Utility works, and other useful information.
Important Tips
(PDF format)
Important Tips provides information on how to maximize use of the
battery pack, which is necessary for computing away from your home
or office.
Windows Help Windows Help explains operations and functions about Windows.
How to Use the Onscreen Manual
13
Preparations
Getting Started
Features
Enjoy videos, music, data exchange, and other
functions easily with SD memory card!
Î “Chapter 4: SD Memory Card/MultiMedia Card” in onscreen Reference Manual
Enlarge the display of characters and icons on the
screen!*1
Î “Chapter 6: Icon Enlarger/Loupe Utility” in onscreen Reference Manual
*1 Some characters in the application software, homepages and HTML e-mails may not be
magnified.
Set a password to prevent unauthorized use!
zVarious password settings / using the SD memory card
Î “Chapter 2: Security Measures” and “Chapter 4: SD Memory Card Security Func-
tion” in onscreen Reference Manual
Effective in giving presentations!
zAlso offers a standard external display connector
Î “Chapter 4: External Display” in onscreen Reference Manual
Enjoy wireless broadband wireless LAN functions
(conforms to IEEE802.11a+b+g)!
zBefore using a wireless LAN, check the wireless LAN on. (Îpage 40)
Various methods for connecting to the Internet!
zUse a telephone line, LAN, or wireless LAN.
Î “Chapter 5: Modem/LAN/Wireless LAN” in onscreen Reference Manual
Protect your computer from viruses!
zUse the Windows Security Center function. Îpage 42
Keep your computer in the most updated condition!
zUse Windows Update or other update functions.
Î “Chapter 8: To Update this Computer to its Latest Version” in onscreen Reference
Manual
Watch DVD videos! Write to CDs!
zWinDVD, B’s Recorder, B’s CLiP already installed.
zThe drive construction (in which the disk cover opens from the top) makes it easy to
set disks even in tight places.
Î “Chapter 3: Using the Drive” in onscreen Reference Manual
14
PreparationsGetting Started
Names and Functions of Parts
Names Functions/Reference
AFunction Keys Press a key in combination with the
Fn
key to execute the function allocated to that
key. Îpage 28
BKeyboard —
CTouch Pad Îpage 26
DLatch
When the display is closed and the latch is locked, the computer goes into standby or
hibernation Mode. (ÎChapter 2: Standby/Hibernation Functions” in onscreen Refer-
ence Manual)
zWhen the computer is in standby or hibernation mode, open the display to restart
operations.
ELEDs Îpage 16
FPower Switch Slide the switch for about one second to turn the power on. Îpage 18
GSpeaker zTo adjust the volume:
Fn
+
F5
(down) /
Fn
+
F6
(up)
zSpeaker on/off:
Fn
+
F4
HDisplay (Internal LCD) To adjust the LCD brightness:
Fn
+
F1
(down) /
Fn
+
F2
(up)
zYou can select a different brightness level setting for when the AC adaptor is con-
nected and for when it is not connected.
ISecurity Lock A Kensington cable can be connected.
For more information, read the manual that comes with cable.
JModem Port Connect modem telephone cable.
Î “Chapter 5: Modem” in onscreen Reference Manual
KLAN Port Connect LAN cable.
Î “Chapter 5: LAN” in onscreen Reference Manual
LSD Memory Card Indica-
tor Îpage 16
MSD Memory Card Slot Î “Chapter 4: SD Memory Card/MultiMedia Card” in onscreen Reference Manual
NPC Card Slot Î “Chapter 4: PC Cards” in onscreen Reference Manual
15
Preparations
Getting Started
Names Functions/Reference
AWireless LAN Antenna
(built-in) This computer has a built-in antenna for wireless LAN communications.
Î “Chapter 5: Wireless LAN” in onscreen Reference Manual
BDC-IN Jack Connect the AC adaptor. Îpage 18
CExternal Display Port Connect the external display cable.
Î “Chapter 4: External Display” in onscreen Reference Manual
DUSB Ports Connect the USB cable.
Î “Chapter 4: USB Devices (External Mouse etc.)” in onscreen Reference Manual
EMicrophone Jack Use only a monaural condenser microphone (miniature jack). Using an input source
other than a monaural condenser microphone may not allow audio to be input or may
damage the equipment.
FHeadphone Jack Use this jack to connect headphones or amplifier-equipped speakers. Audio output
from the internal speaker is disabled when headphones or external speakers are con-
nected.
GOpen Lever Slide the lever to open the disk cover. This works only when the power is on.
HDVD-ROM & CD-R/RW
Drive Îpage 44, “Chapter 3: DVD-ROM & CD-R/RW Drive” in onscreen Reference Manual
A lithium ion battery that
is recyclable powers the
product you have pur-
chased. Please call 1-
800-8-BATTERY for infor-
mation on how to recycle
this battery.
L’appareil que vous vous
êtes procuré est alimenté
par une batterie au
lithium-ion. Pour des
renseignements sur le
recyclage de la batterie,
veuillez composer le 1-
800-8-BATTERY.
ILatch (left) This latch is locked manually when inserting/removing the battery pack.
Îpage 17
JLatch (right) This latch is locked automatically when inserting the battery pack properly.
KBattery Pack Îpage 17, “Chapter 2: Battery Power” in onscreen Reference Manual
LRAM Module Slot Îpage 29
MEmergency Hole Îpage 44, “Chapter 3: DVD-ROM & CD-R/RW Drive” in onscreen Reference Manual
16
PreparationsGetting Started
Confirm the Status Using the LEDs
Indicators Indicator Name/Status
Power indicator
zNot lit: Power off / Hibernation mode
zGreen: Power on
zBlinking green: Standby mode
Battery pack indicator
zNot lit: Battery pack is not connected or no charging.
zOrange: Charging in progress.
zGreen: Fully charged.
zRed: The battery level is very low (the charge is approx. 9% or less).
zBlinking red: Battery pack or charging circuit may not be working properly.
zBlinking orange: Battery cannot be recharged temporarily (The internal temperature of the battery
pack is outside the acceptable temperature range for recharging.)
Caps Lock indicator
zThis indicator lights green when the
Caps Lock
key is pressed: Subsequent non-shifted input is
capitalized.
NumLk indicator (Ten-key mode)
zThis indicator lights green when the
NumLk
key is pressed: Part of the keyboard (see figure below)
will function as a ten-key numeric input.
When the green light is on, if the
Fn
key is pressed along with keys on certain other segments of the
keyboard, then those keys will operate as numeric keys.
The [Enter] key functions differently depending on the application.
To disable, press the
NumLk
key once more (the indicator will turn off).
zWhen the NumLk indicator is on: the following functions will operate:
ScrLk indicator (Scroll lock)
zThis indicator lights green when the
Fn
+
ScrLk
key are pressed: Scroll lock functions differently
depending on the application.
Hard disk drive indicator
zLighted: This indicator lights when the hard disk drive is accessed.
DVD-ROM & CD-R/RW drive indicator
zLight off: Drive power is off.
zLight on: Drive power is on, but the DVD-ROM & CD-R/RW drive is not accessed.
zBlinking: Drive power is on, and the DVD-ROM & CDR/RW drive is being accessed.
How to switch the drive power on/off (ΓChapter 3: DVD-ROM & CD-R/RW Drive” in onscreen Refer-
ence Manual)
SD memory card indicator
zLighted: This indicator lights when the SD memory card or MultiMedia Card is accessed.
17
Preparations
First-time Operation
Explains operating procedures from the time of purchase to the start of first Windows
operations.
1Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these
items are missing or is not working properly, contact your technical support
office.
2Read the LIMITED USE LICENSE AGREEMENT (Îpage 62).
Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking
the seal on the computer’s packaging.
3Turn the computer over and insert the battery pack.
ASlide the left-side latch (A) to the unlock position ( ).
BMake sure the battery pack is facing the correct direction, slide it in the
direction of the arrow.
CSlide the left-side latch to the lock position ( ), and then check to ensure
that the battery pack is held firmly.
(Right-side latch is locked automatically.)
CAUTION
zConfirm that the latch is properly locked. If it is not, the battery pack may come
off while you are carrying the computer.
zDo not touch the terminals on the battery pack and the computer. The battery
pack may no longer function properly if the contacts are dirty or damaged. Also,
the computer may not operate properly.
zBefore using the battery pack, carefully read “Precautions (Battery Pack)”
(Îpage 10).
Model No: CF-AA1623A
AC adaptor......... 1
Model No: CF-VZSU27A
AC Cord............. 1 Battery Pack........ 1
Product Recovery
DVD-ROM........... 1 Modem Telephone
Cable................... 1 Operating Instructions
(This book)
................. 1
Windows® Book.... 1
LIMITED WARRANTY
............................... 1
First-time Operation
18
Getting Started
Preparations
4Open the display.
ASlide the latch (B) located at the front.
BLift open the display.
zDo not open the display wider than necessary (135° or more), and do
not apply excessive pressure to the LCD. Do not open or close the
computer holding the edge of the LCD segment. Hold the C (below)
segment to open or close the computer.
5Connect your computer to a power outlet.
zBe sure the AC adaptor is connected until completing the first-time use
operation.
zThe battery pack will be charged automatically.
Charging Time: Approx. 4.5 hours (Varies depending on the usage condi-
tions.)
zWhen using the computer for the first time, do not connect any peripheral
device except the battery pack and AC adaptor to the computer.
CAUTION
Handling the AC adaptor
zDo not subject the AC adaptor to any strong impact.
Using the AC adaptor after a strong impact such as being dropped may result in
electrocution, short circuit, or fire.
zUse only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
zProblems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the battery
pack alone.
6Turn your computer on.
zSlide the power switch and hold it for approximately one second until
the power indicator turns on before releasing it.
CAUTION
zDo not slide the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
zDo not slide the power switch repeatedly.
zIt takes some time before [Windows XP Professional Setup] is displayed. Do not
press any keys or touch the touch pad, and do not change the Setup Utility set-
tings. If you do, Windows setup may not operate properly.
19
Preparations
7Setup Windows.
Moving the cursor or clicking buttons can be performed with the touch pad
(A) and left button (B).
zDuring operations, it may take some time before the next screen is dis-
played.
Wait, and do not press any keys, or touch the touch pad, etc.
AAt [Welcome to the Windows XP Setup Wizard], click [Next].
BAfter reading the agreement, click [I accept this agreement], then click
[Next].
zIf [I don’t accept this agreement] is selected, the Windows setup will be
aborted.
CSelect settings for your region, then click [Next].
DEnter your name and then click [Next]. (You do not need to enter your
organization.)
E
Enter your computer name and administrator password and then click [Next].
z"Computer name" is for recognizing this computer when multiple com-
puters are connected via the network.
zRemember this password! This password may be needed to manage
the computer.
FEnter the correct date, time and the time zone, then click [Next].
zClick or to set.
zIf set properly, click [Next].
GEnter your password set in step E and click .
zWhen inputting the password, confirm that character input is not set to
“Caps Lock” or “NumLk.” (Îpage 16)
NOTE
zWhen Windows setup is completed
The following message will be displayed at the bottom right of the screen:
"Your computer might be at risk." Continue to the next step.
The message is generated by the [Security Center] function in [Control Panel],
and does not indicate an error or malfunction. For more information about
[Security Center]: Îpage 42
zIt may take some time before the computer restarts. Wait, and do not
press any keys, or touch the touch pad, etc.
zAfter being set automatically, the computer will restart automatically,
and Windows will start.
First-time Operation
20
Getting Started
Preparations
8Create "User Accounts" to recognize this computer's user.
zIf you make mail settings, create password reset disks (Îpage 21), or
conduct other related operations before creating the user account, you will
be unable to use mail history or settings. Create the user account at this
time.
AClick [start]*1 - [Control Panel] - [User Accounts] - [Create a new
account].
*1 Immediately after Windows setup, the screen may show a display as though [start]
has been clicked (i.e., [All Programs] and other menus may be shown above
[start]).
BEnter a new name for the new account, then click [Next].
(For example: Matsushita)
CClick [Create Account].
zWhen you create the first new account, you can only select [Computer
administrator].
Once a “Computer Administrator” account has been created, you can
create additional limited user accounts by operating step 8.
DSet the password.
zWhen sharing this computer with multiple users, we recommend set-
ting a password for your own account.
zWhen setting password, click the account for which you will set the
password, click [Create a password], and the password following the
onscreen instructions, and click [Create Password].
Remember the password you have set. It is useful to input a hint in
[password hint] in case you forget your password. In addition, we rec-
ommend that you create a password reset disk beforehand (Îpage
21).
Refer to “When administrator password is forgotten” (Îpage 49) in
“Dealing with Problems (Summary).
EClick [start] - [Turn Off Computer] - [Restart] to restart the computer.
FAt the Welcome screen, click the created user (user icon) to log-on.
zIf the password has been set, enter the password and click . You
cannot operate the computer until the proper password is entered.
Confirm that character input is not set to "Caps Lock" or "NumLk."
(Îpage 16)
zNote also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Win-
dows setup will not be displayed.
This concludes the first-time use operation guidelines.
21
Preparations
NOTE
zAbout the Icon Enlarger:
If the characters or icons on the screen are too small and difficult to see, after
completing step 8, click [start] - [All Programs] - [Panasonic] - [Icon Enlarger].
This will allow you to magnify the display of characters and icons on the
screen. (ΓChapter 6: Icon Enlarger” in onscreen Reference Manual)
The [Icon Enlarger] can be set separately for each account.
zYou can also use [Loupe Utility], which enlarges a part of the screen. (ΓChap-
ter 6: Loupe Utility” in onscreen Reference Manual)
zTo improve the security of the computer, be sure to refer to "Security of the
Computer" (Îpage 42) and "Windows Update" (Îpage 43).
zIf you use the wireless LAN, be sure to refer to "Wireless LAN" (Îpage 40).
When you have forgotten a Windows log-on password
Windows XP has a function to reset a current password and to set a new password.
To use this function, you need to create a password reset disk beforehand following the
steps below.
AConnect the USB floppy disk drive (optional: CF-VFDU03) to your com-
puter.
BClick [start] - [Control Panel] - [User Accounts].
CClick the account you have logged on, and click [Prevent a forgotten pass-
word] from [Related Tasks] menu.
Create a password reset disk following the onscreen instructions, and
store the password reset disk in a safe place.
zOnly the log-on password for each account can be reset. The pass-
word set in the Setup Utility cannot be reset.
The screen displayed first when powering on the computer and logging on to Windows,
is called the “desktop.” (These screens and icons are only examples.)
Icons on the desktop
When you double-click icons, the software application will run and the window will
open.
[start] menu
When you click [start], the menu will be displayed.
Select the software application, etc. that you want to use from the menu, and click it.
Notification area (see the bottom right on the screen)
zIf the icon on the notification area being explained in this manual is hidden and not
displayed, click the icon to display all icons.
zThe notification area icons used in this manual are only examples. The actual dis-
play of the order and types of icons may differ depending on your computer environ-
ment (various function settings, devices connected, etc.).
Password Reset Function
Screen Display
etc.
First-time Operation
22
Getting Started
Preparations
Roles of Icons on the Notification Area
The notification area icons below are only examples.
Icons Names and roles Reference
Intel Extreme Graphics 2 for mobile icon
(Use for screen settings)
or
Intel® PROSet/Wireless Software icon
(Turn wireless LAN on/off and use to set Wireless LAN
connections)
Îpage 40
or 802.11a enable/disable icon
(Enable/disable 802.11a) Îpage 40
Pointing device icon
(Use to make various touch pad settings)
Scroll icon
(Use to make settings and confirm status for the Touch
Pad utility)
Î"Chapter 2: Using the Touch Pad"
in onscreen Reference Manual
Volume icon
(Set volume) ÎWindows help
or Wireless LAN network connection icon
(Use to set wireless LAN connections)
Î"Chapter 5: Wireless LAN" in
onscreen Reference Manual
or LAN network connection icon
(Use to set LAN connections)
Î"Chapter 5: LAN" in onscreen
Reference Manual
B's CLiP icon
(Use to make various B's CLiP settings)
Î"Chapter 3: Writing to CDs (B’s
Recorder/B’s CLiP)" in onscreen
Reference Manual
or Drive power icon
(Turn the DVD-ROM & CD-R/RW drive power on/off)
Î"Chapter 3: DVD-ROM & CD-R/
RW Drive" in onscreen Reference
Manual
Battery meter icon
It is displayed when disconnecting the AC adaptor. (Use
to make various battery settings)
Î"Chapter 2: Battery Power" in
onscreen Reference Manual
or Windows security icon
(Use to make or confirm security settings) Îpage 42
or
Fn key icon
It is only displayed when adding the check mark for
[Show status on screen] on the [Hotkey Settings]
screen. (Use to confirm whether the Fn key is locked)
Î"Chapter 2: Using the Fn Key" in
onscreen Reference Manual
23
Getting Started
Starting Up/Shutting Down
1Open the display.
ASlide the latch (A) located at the front.
BLift open the display.
zDo not open the display wider than necessary (135° or more), and do
not apply excessive pressure to the LCD. Also, do not hold the LCD
when opening or closing the display.
2Turn your computer on.
Slide the power switch and hold it for approximately one second until the
power indicator turns on before releasing it.
zDo not slide the power switch and hold it for more than four seconds; this
will cause the power to be turned off forcibly.
zWhile booting, avoid the following until the hard disk drive indicator has
turned off.
Connecting or disconnecting the AC adaptor.
Touching the power switch.
Performing any keyboard, touch pad, or external mouse operations.
Closing the display.
Sliding the open lever.
zDo not slide the power switch repeatedly.
zOnce the computer is powered off, you must wait at least ten seconds
before powering it on again.
3Log-on to Windows.
After confirming that the hard disk drive indicator has turned off, click the
user (user's icon).
zInput the password, then click . Until the correct password is entered,
the computer will not operate.
Confirm that character input is not set to “Caps Lock” or “NumLK.
(Îpage 16)
zThis operation may differ according to [Use the Welcome screen] setting
(Îpage 41).
zWhen only one user has been created and no password has been set, the
screen for selecting the user will not be displayed (automatic log-on).
4Select your application.
Run various software applications, etc. and operate them.
NOTE
zThe power saving function is factory set, so if no key is pressed or if no device
has been accessed for a certain interval of time:
The power to the LCD and hard disk may be turned off. The LCD will resume
operation when the touch pad or an external mouse (when one is connected)
is used or a key is pressed.
The power to the LCD may be turned off even when an application software is
being installed. In this case, because it is conceivable that a selection dialog
box will be shown, do not press the
Space
key or the
Enter
key to attempt
to resume from this condition as doing so may trigger a selection, but instead,
press a key unrelated to the direct triggering of a selection, like the
Ctrl
key.
In addition, when the computer is left alone, it automatically enters the standby
Starting Up
Starting Up/Shutting Down
24
Getting Started
or hibernation mode. The computer will resume by sliding the power switch.
(Î “Chapter 2: Standby/Hibernation Functions” in onscreen Reference Man-
ual)
If there is no disk set in the DVD-ROM & CD-R/RW drive, the drive power will
be turned off. (Î “Chapter 3: DVD-ROM & CD-R/RW Drive” in onscreen Ref-
erence Manual)
zWhen the CPU temperature rises, the computer may not power on to prevent
the CPU from overheating. Should this happen, allow the computer to cool
down then switch the power on again.
If the computer still does not power on, contact your technical support office.
If the screen on the left is displayed immediately after
you turn on the power...
A password has been set to ensure the computer's security.
Enter your password*1 and press the
Enter
key.
zWhen the correct password is input, the computer will start.
zWhen three incorrect password attempts or nothing is input for one minute, the com-
puter will power off.
*1 Supervisor Password or User Password set in the Setup Utility (not the Windows password).
1Save important data and close each application.
2Display the shutdown screen.
Click [start] - [Turn Off Computer].
(Îpage 41 “Change the Way Users log on or off”)
3Click [Turn Off].
Your computer will power off automatically.
zRestarting your computer (without shutting down): click [Restart].
To shut down using the keyboard:
APress the key, the
U
key, and select [Turn Off] with Î Í Ï Ð.
BPress the
Enter
key.
CAUTION
zDo not do the following during the shutdown/restart procedure.
Connecting or disconnecting the AC adaptor.
Touching the power switch.
Performing any keyboard, touch pad or external mouse operations.
Closing the display.
Sliding the open lever.
NOTE
zWhen the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet. About 1.5 W of power is consumed simply by having
the AC adaptor plugged into an electrical outlet.
Shutting Down (power off your computer)
25
Getting Started
When you leave the computer or interrupt your work...
If you use the “Standby” or “Hibernation” function, then when you turn on the power
next time, the application software and files you were using before will be displayed,
and you can restart the same operations. (Î “Chapter 2: Standby/Hibernation Func-
tions” in onscreen Reference Manual)
26
Getting Started
Using the Touch Pad
Use the touch pad to move the cursor on the screen and perform computer operations.
A. Work Surface (touch pad)
B. Left Button
C. Right Button
NOTE
zYou can change the speed of the double-click or the operations of mouse but-
tons using [Mouse Properties] screen.
To display [Mouse Properties]:
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
zWhen using the touch pad, keep the following in mind.
By design the touch pad is to be used with a finger tip only. Do not place any
object or press down forcefully with sharp-pointed objects, i.e. finger nails,
pencils, or pens on the work surface.
Function Operation
Moving the Cursor Move the tip of your finger lightly over
the work surface.
Tapping/Clicking
tapping or clicking
zA right-click: Can only be performed by clicking the
right button.
Double-Tapping/
Double-Clicking
double-tapping or double-clicking
Dragging
Two quick taps, but on the second tap leave your finger
down (applying pressure) and move it on the work sur-
face.
or
While holding down the button, move your finger on the
work surface.
Vertical Scroll
Trace a circle around the touch pad.
Horizontal Scroll Trace a circle around the touch pad. (Î “Chapter 2:
Using the Touch Pad” in onscreen Reference Manual)
The setup is required before using this function.
(Î “Chapter 2: Using the Touch Pad” in onscreen Refer-
ence Manual)
27
Getting Started
Try to avoid having any harmful substances, such as oil, come in contact with
the touch pad. The cursor may not work properly in such cases.
When the cursor doesn’t move the way you want it to
zSensitivity when touching the touch pad can be adjusted.
(Î “Chapter 2: Using the Touch Pad” in onscreen Reference Manual)
zWhen an external mouse is connected and the cursor does not operate prop-
erly:
In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you
want to use the touch pad again, return the setting to [Enable]. (Îpage 33)
28
Getting Started
Using the Fn Key
If you press a key for a character or symbol contained in a key while
pressing the
Fn
key, the function for the character or the symbol con-
tained in that key will be executed.
zDetails of various functions Î “Chapter 2: Using the Fn Key” in
onscreen Reference Manual
zWhen using with the
Fn
key and the
Ctrl
key functions inter-
changed. (Îpage 33)
Press the
Ctrl
key instead of the
Fn
key for the desired Fn function.
(It is not possible to replace the markings on the keys, or the keys
themselves)
Key Functions Pop-up Window
(Displayed after logging on to
Windows)
Fn
+
F1
Fn
+
F2
LCD brightness control
Fn
+
F1
(down) /
Fn
+
F2
(up)
Fn
+
F3
Display change (When the external display is connected)
Fn
+
F4
Speaker on/off switch
OFF
(MUTE)
ON
Fn
+
F5
Fn
+
F6
Volume control
Fn
+
F5
(down) /
Fn
+
F6
(up)
Fn
+
F7
Forcing the standby function
Fn
+
F9
Remaining capacity of the battery pack
When the battery
pack is inserted in the
computer (example)
When the battery
pack is not inserted in
the computer
Fn
+
F10
Forcing the hibernation function
Fn
+
NumLk
Run the ScrLk (Scroll Lock) function
The functions differ depending on the application software
being used.
Fn
+
Home
Lead to the last page or moves the cursor to the end of the
current line (End)
29
Getting Started
Expanding Memory
Depending on the computer, you can expand the RAM module (sold separately). The
increase in memory will improve the processing speed of Windows and other applica-
tion software. (Effects may differ depending on your usage conditions.)
zUse recommended RAM module products. Do not use non-recommended RAM
modules. Non-recommended RAM modules may not operate properly, and may
cause damage to your computer. Some non-recommended RAM modules may
overheat, causing the cover to warp. Refer to "Specifications" (Îpage 72) for rec-
ommended RAM module specifications. Refer to various sources for recommended
RAM module.
zMatsushita Electric Industrial Co., Ltd. will bear no responsibility whatsoever for fail-
ures or damage caused by the use of non-recommended RAM modules, or by
incorrect installation or removal of such RAM modules. Before installing a RAM
module, confirm the product type and the correct installation method.
CAUTION
zRAM modules are extremely sensitive to static electricity. There are cases
where static electricity generated by the human body has adversely affected
such RAM modules. When inserting or removing a RAM module, do not touch
the terminals or internal components, insert objects other than the module, or
allow foreign particles to enter. Doing so has been known to cause damage, fire
or electric shock.
Inserting
1Power off your computer. (Îpage 24)
zDo not shut down using the standby or hibernation function.
zDisconnect the AC adaptor.
2Turn the computer over, remove the battery pack and the
screw (A), then A hold up the cover (B) and B pull it out.
(Îpage 15 “L” of “Names and Functions of Parts”)
zThere is one screw on the cover. Do not confuse this with the cover with
two screws.
zUse the proper size screw driver to insure that the screw does not get
stripped.
3Insert the RAM module.
ACheck direction of a RAM module (C).
Hold the RAM module in the direction that the notch (E) of the RAM
module suits to the protrusion (D) of the slot.
BPlace the RAM module lightly in parallel with a slot.
(The gold terminals (F) are visible)
Inserting / Removing the RAM Module
Expanding Memory
30
Getting Started
CInsert the module parallel to the slot and press firmly until the gold termi-
nals are no longer visible.
zIf the RAM module is difficult to insert, do not force it. Check once more
to ensure that the module is positioned correctly.
zThe slot may be damaged if the following procedure is performed with-
out inserting the module firmly.
DPress the RAM module down until the right and left hooks (G) lock into
place.
zWhen pressing down the module, the right and left hooks will open
slightly and will return after locking.
zIf the RAM module is difficult to press down, do not force it. Check once
more to ensure that the module is positioned correctly.
4Put the cover back in place.
AInsert the cover at an angle, then fit it into place.
BFasten the screw.
NOTE
zIf the RAM module has not been inserted properly, or if a RAM module other
than one matching the specifications has been inserted, a beep will sound and
the message “Extended RAM Module Failed” will be displayed when turning the
power on. In this case, turn the power off, confirm that the RAM module meets
the specifications, and reinsert it.
zWhether the RAM module is properly recognized or not can be confirmed in
[Information] menu of the Setup Utility (Îpage 33).
Removing
After making the settings in step 1 to 2 of “Inserting,” remove the RAM module as fol-
lows.
AGently open the left and right hooks (H).
The RAM module will be raised at an angle.
BGently remove the RAM module from the slot.
CPut the cover back in place.
Refer to step 4 of “Inserting.
31
Getting Started
Setup Utility
The Setup Utility sets the computer's boot-up operating environment, i.e. passwords,
startup drive, etc. The following six menu items are available:
[Information], [Main], [Advanced], [Security], [Boot], [Exit]
1Turn on or restart the computer.
2Press the
F2
key while [Panasonic] boot screen is displayed
soon after the computer begins the startup procedure.
When the password is set, the screen shown at left will be displayed. Enter
your password, and press the
Enter
key.
When inputting the Supervisor Password
zYou can register all items of the Setup Utility.
When inputting the User Password
zOn the [Advanced] and the [Boot] menu:
You can view the settings, but cannot change it.
zOn the [Security] menu:
[Clear registered SD card], [Set Supervisor Password] and [Hard
Disk Lock] will not be displayed.
[Password on boot], [SD Startup], [SD Setting Method], [Setup Utility
Prompt], [Boot First Menu] and [User Password Protection] will be
displayed, but cannot be set.
The User Password can be changed only when [User Password Pro-
tection] has been set to [No Protection]. The User Password cannot
be deleted.
zOn the [Exit] menu:
[Get Default Values] option will not be displayed.
zThe
F9
key does not work.
NOTE
zCannot display the Setup Utility screen in simultaneous display.
By pressing the
Fn
+
F3
key, display destinations can be changed either exter-
nal display or the internal LCD.
zWhen [Password on boot] in the Setup Utility is set to [Disable]:
When the computer is started up, entering a password is not necessary.
When the Setup Utility is started up:
The password becomes necessary. This alternative can prevent the contents
of the Setup Utility from being changed.
zIf you fail to press the
F2
key at the right moment, the Setup Utility will not start
up. In this case, let the computer fully boot up, and then perform a shutdown or
restart from Windows.
zTo close the Setup Utility:
APress the
Esc
key.
BSelect the exiting method from the [Exit] menu and press the
Enter
key.
CSelect [Yes] and then press the
Enter
key.
Running the Setup Utility
Setup Utility
32
Getting Started
How to use the screen
A. You can select menu items by moving the cursor with the Í key and the Î
key.
B. If there are several selectable items, you can choose the desired item by
pressing the Ï key and the Ð key. The color of the selected item will
change.
C. You can display the submenu by pressing the
Enter
key on the item
shown in reverse display.
D. When the submenu is displayed, you can select items by pressing the Ï
key and the Ð key.
E. The keys that can be used for settings are displayed in the Setup Utility
screen.
Key Operations
z
F1
To display the corresponding "help" file (Press the Ï key or the Ð key to display next
help page or previous help page. Press the
F1
key to return to the original screen.)
z
Esc
To display the [Exit] menu
Ð
To move among the items (Use these keys when selecting the item.)
Î
To move among the menus (Use these keys when the [Information], [Main],
[Advanced], [Security], [Boot], or [Exit] menu is selected.)
z
F5
Select previous item (Use this key when changing setting values.)
z
F6
Select next item (Use this key when changing setting values.)
z
Enter
To display submenu of each item (Use this key after selecting the item by using the
Ï key or the Ð key. Close the submenu by using the
Esc
key.)
z
F9
To set default settings (except the password, System Time and System Date.)
z
F10
To save the settings and exit
PhoenixBios Setup Utility
33
Getting Started
Information Menu
(An underline indicates the factory default settings)
Language
Select the language for displaying the Setup Utility. English
Japanese
Model No.
Serial No.
CPU Type
CPU Speed
BIOS
Embedded Controller
System Memory
Primary Master
To display and con-
firm information.
These items cannot
be selected or
changed.
Secondary Master
When [CD/DVD Drive Power] has been set to [Off] in [Main] menu, [Power Off] is displayed.
Main Menu
(An underline indicates the factory default settings)
System Time
Time is shown in 24-hr. style.
•The
Tab
key can be used to move hour/minute/second. Numerical values can be
adjusted using the
F5
key and the
F6
key.
[xx:xx:xx]
System Date
Date is shown in order of Month/Day/Year.
•The
Tab
key can be used to move Month/Day/Year. Numerical values can be adjusted
using the
F5
key and the
F6
key.
[xx/xx/xxxx]
Touch Pad
Select whether to use the touch pad ([Enable]) or not ([Disable]). Disable
Enable
Fn/Ctrl Key
Select whether to switch the
Fn
key with the
Ctrl
key functions, and vice versa on the
internal keyboard.
Do not attempt to replace the markings on the keys, or the keys themselves.
Normal
Replace
Display
The display destination in cases where Windows is not running is set here.
If an external display is not connected, all information will appear on the internal LCD even
if [External Monitor] is selected.
After Windows starts up, the screen is displayed on the display destination set in the fol-
lowing menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] -
[Devices]
External Monitor
Internal LCD
Display Expansion
Select whether to have the display expanded when not using the native screen resolution. Disable
Enable
CD/DVD Drive Power
You can set the drive power to [On] or [Off] when the computer is started up.
When set to [Off].
The next time the computer is started up, you will not be able to boot from the
DVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Win-
dows has started. To boot from the DVD-ROM & CD-R/RW drive (give priority
to CD/DVD drive in [Boot] menu), set this to [On].
If operations are resumed from hibernation mode while a disk is set, it may
take about 20 seconds for operations to resume.
Off
On
Setup Utility
34
Getting Started
NOTE
zThe [Advanced] menu cannot be changed when the Setup Utility is started up
with the User Password.
CD/DVD Drive Speed
Select whether to set the DVD-ROM & CD-R/RW drive speed to fast ([High]) or slow
([Low]).
High
Low
(An underline indicates the factory default settings)
Advanced Menu
(An underline indicates the factory default settings)
Modem
Select whether to use the internal modem function ([Enable]) or not ([Disable]). (This does
not work for the external modem.)
Disable
Enable
LAN
Select whether to use the internal LAN function ([Enable]) or not ([Disable]).
(This does not work for the external LAN card.)
Disable
Enable
Boot up from LAN
Select whether to use the function starting the computer from a LAN server ([Enable]) or
not ([Disable]).
This can be set only when [LAN] is set to [Enable]. (This function works only for the inter-
nal LAN. This does not work for an internal wireless LAN and external LAN card.)
Disable
Enable
Wireless LAN
Select whether to use the internal wireless LAN function ([Enable]) or not ([Disable]). (This
does not work for the external wireless LAN card.)
Disable
Enable
Legacy USB Support
Select whether to use the function that makes the computer recognize USB keyboard and
USB floppy disk ([Enable]) or not ([Disable]) before starting Windows.
Disable
Enable
35
Getting Started
NOTE
zWhen the Setup Utility is started up with the User Password:
[Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock]
will not be displayed.
[Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt],
[Boot First Menu] and [User Password Protection] will be displayed, but cannot
be set.
The User Password can be changed only when [User Password Protection]
has been set to [No Protection]. The User Password cannot be deleted.
[SD Startup], [SD Setting Method] and [Clear registered SD card] will be dis-
played only when an SD memory Card has been registered. (ΓChapter 4:
SD Memory Card Security Function” in onscreen Reference Manual)
Security Menu
(An underline indicates the factory default settings)
Password on boot
Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password
or the User Password on booting.
Disable
Enable
SD Startup
Select whether to use an SD memory card instead of entering the password on booting
([Enable]) or not ([Disable]).
When registered SD memory card, this is set to [Enable].
Cannot be set when [Password on boot] is set to [Disable].
Disable
Enable
SD Setting Method
Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD
memory card is used instead of entering the password.
This can be set only if [SD Startup] has been set to [Enable].
Cannot be set when [Password on boot] is set to [Disable].
Leave Set
Set and Eject
Clear registered SD card
Clear the registration from all registered SD memory cards not to be used instead of
entering the password on booting.
To the sub-menu
Set Supervisor Password
Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup
Utility settings, also if you require a password on boot, set [Password on boot] to [Enable]
after you set Supervisor Password.
To the sub-menu
Setup Utility Prompt
Select whether to display ([Enable]) or not to display ([Disable]) the message “Press F2 for
Setup/F12 for LAN” shown on the bottom of the [Panasonic] boot screen that is displayed
after starting this computer.
Disable
Enable
Boot First Menu
Select whether to display “Boot Menu” ([Enable]) or not ([Disable]). (Îpage 36). Disable
Enable
Hard Disk Lock
Select whether enable ([Enable]) or disable ([Disable]) the hard disk lock.
This function will not work without the Supervisor Password being set.
Disable
Enable
User Password Protection
Select whether to permit changing the User Password ([Protected]) or not ([No Protec-
tion]).
No Protection
Protected
Set User Password
Set User Password when multiple users use this computer, etc.
For example, when the system administrator sets Supervisor Password and User Pass-
word and lets other users know only the User Password, other users cannot change some
of the settings in Setup Utility.
This function will not work without the Supervisor Password being set.
To the sub-menu
Setup Utility
36
Getting Started
Set priorities (displayed in order from top to bottom) for devices that start up the operat-
ing system.
To move a device up by one in the order, select the device with the Ï key and the Ð
key, and then press the
F6
key.
To move a device down by one in the order, select the device with the Ï key and the Ð
key, and then press the
F5
key.
zPanasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup
(recommended).
*1 A “+” will not be displayed if a floppy disk drive is not connected.
*2 When you select an item with a “+” display and press the
Enter
key, the name of the con-
nected device (including internal devices) will be displayed. (Press the
Enter
key once
more to return the display to its original condition.)
Press the
Ctrl
+
Enter
key to display the names of both the floppy disk drive and the hard
disk drive.
NOTE
zWhen [CD/DVD Drive Power] is set to [Off] in [Main] menu, startup cannot be
executed from DVD-ROM & CD-R/RW drive (item name CD/DVD drive). The
disk cover cannot be opened until Windows has started.
zThe [Boot] menu cannot be changed when the Setup Utility is started up with
the User Password.
zBoot Menu
The device for starting up the operating system can also be selected during
computer start-up. After the computer is turned on and the
Esc
key is pressed
at [Panasonic] boot screen, [Boot Menu] (the device selection screen) will
appear. When the [Boot] menu setting is changed, the selection screen display
will also change. [Boot Menu] is displayed only when [Boot First Menu] in the
[Security] menu is set to [Enable].
Boot Menu
+Floppy Drive*1*2
+Hard Disk Drive*2
CD/DVD Drive
LAN
37
Getting Started
Exit Menu
Save Values & Exit Exit the Setup Utility and save your changes to
CMOS.
Exit Without Saving Changes Exit the Setup Utility without saving your changes to
CMOS.
Get Default Values
This item is not displayed when starting up the Setup Util-
ity with the User Password.
Set the Setup Utility to the default settings.
Load Previous Values Load previous values from CMOS for all Setup items.
Save Current Values Save your changes to CMOS.
Battery Recalibration To accurately display remaining battery capacity, fully
charge the battery pack, then fully discharge it.
(ΓChapter 2: Battery Power” in onscreen Refer-
ence Manual)
Hard Disk Backup / Restore Backup data to a backup area in the hard disk. Also,
restore backed up data to the original hard disk.
Before executing, be sure to read "Hard Disk Backup
Function" (Îpage 64).
38
Operation
Useful Information
Usage / Handling / Maintenance
zPlace the computer on a flat stable surface.
Do not place the computer to tip over. When the computer receives extremely strong
shock after disk may become inoperable.
zOperation: Temperature: 5°C to 35°C {41°F to 95°F}
Humidity: 30% to 80% RH (No condensation)
zStorage: Temperature: -20°C to 60°C {-4°F to 140°F}
Humidity: 30% to 90% RH (No condensation)
Even within the temperature and humidity ranges noted above, using the com-
puter for long periods of time in an environment with exceptionally low or high tem-
peratures or high humidity may result in deterioration of the product, which can
lead to a reduction in product life.
zKeep the computer clear of electromagnetic cards and objects that emit electromagnetic
waves.
Do not place the computer near magnets, electromagnetic bracelets, or other mag-
netic fields.
This computer uses a magnet in the position marked with a circle in the diagram
on the left. Do not place a magnetic card or other magnetic field in contact with
the computer.
We recommend the following:
zPreparing a spare battery pack (sold separately).
zMaking backup copies on SD memory cards, etc. and if necessary, carrying them
with you.
When Carrying the computer, be sure to keep to the fol-
lowing:
zTurn off the computer.
zRemove all external devices, cables, PC Cards protruding from the computer (see
figure A), SD memory cards, and MultiMedia Cards before transporting the com-
puter.
zClose the display, and ensure that the latch (Îpage 14) is positioned correctly in
the slot.
Do not carry the computer by gripping the display or the cabinet around the display
(see figure B).
zDo not drop or hit the computer against solid objects.
zWhen taking an airplane
Always carry your computer and disks, etc with you. Never check it in with lug-
gage.
Before using the computer inside an airplane, we recommend asking the airlines
regarding their policy on this issue.
zWhen transporting a spare battery pack (sold separately) inside a package, brief-
case, etc., it is recommended that it be placed in a plastic bag in order to protect its
contacts.
zIf the computer is being carried in a soft bag when the battery pack has been
removed, be careful to avoid undue pressure on the body of the computer in a
crowded place, etc., as this may result in damage to the LCD.
zCare of the display / touch pad:
Wipe lightly with a gauze or other dry, soft cloth.
zWhen the touch pad or other area other than the screen becomes dirty: wet a soft
cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thor-
oughly, and wipe the dirty area gently. Using a detergent other than a neutral
Usage Environment
Handling
Maintenance
39
Operation
Useful Information
kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted sur-
faces.
CAUTION
zDo not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect
the surface, e.g., discoloration. In addition, do not use commercially-available
household cleaners and cosmetics, as they may contain components harmful to
the surface.
zDo not directly add or spray water or detergent onto the computer. If liquid
enters the inside of the computer, it may cause it to work improperly or be dam-
aged.
40
Operation
Useful Information
Wireless LAN
For instructions on settings for wireless LAN and cautions during use, click [start] -
[Reference Manual], and refer to “Chapter 5: Wireless LAN” in onscreen Reference
Manual.
About Turning On/Off the Wireless LAN
zBefore using a wireless LAN, turn it on using Intel® PROSet/Wireless Software.
Turning on/off the Wireless LAN
1Double-click the icon / the icon / the icon (when
the wireless LAN is on) or the icon (when the wireless
LAN is off) on the notification area or click [start] - [All Pro-
grams] - [Intel PROSet Wireless] - [Intel PROSet Wireless].
2Click ٕ and click [Wireless On] or [Wireless Off].
Enable/disable wireless LAN standard IEEE802.11a
(802.11a)
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard
is restricted by law. Comply with the laws in the country concerned. (Îpage 3)
1Click the icon (when the wireless LAN is on) or the
icon (when the wireless LAN is off) on the notification area.
2To disable 802.11a:
zClick [Disable 802.11a].
To enable 802.11a:
zClick [Enable 802.11a].
Even when 802.11a is enabled or disabled, or will not change.
Do not use the wireless LAN on airplanes, in hospitals,
or in other locations where wireless LAN signals may
affect the operation of devices in the vicinity.
Abide by instructions regarding use in airplanes and hospitals.
41
Operation
Useful Information
Windows/Antivirus Protection
Depending on the settings in Windows, installed applications, drivers, menus and other
displays may be inoperable.
In some cases, certain functions, such as the password reset disk (Îpage 21), may
not operate. In this case, refer to the items below, and the applied items from the prob-
lem-solving section of this manual and onscreen Reference Manual, Windows Help
(Îpage 12), and the software application and driver’s operating instructions, etc.
Change the Way Users Log on or off
If the check mark is added for [Use the Welcome screen] or [Use Fast User Switching]
in [start] - [Control Panel] - [User Accounts] - [Change the way users log on or off], the
operation differs as follows.
Use the Welcome screen
The operations when starting up or shutting down Windows differ depending on
whether this item has a check mark or not.
At the time of purchase, it is set with the check mark added (when using).
When [Use when logging on to Windows] is set in [SD Card Setup] (Î “Chapter 4:
SD Memory Card Security Function” in the onscreen Reference Manual), the Wel-
come screen cannot be used.
Use Fast User Switching
When adding the check mark for this setting, you can change to another user without
logging on again when multiple users use the computer.
This manual explains the procedure for cases where the check mark is added.
In the following case, Fast User Switching cannot be used.
zWhen the check mark is not added for [Use the Welcome screen]
zWhen joining the network domain
zWhen the [Use when logging on to Windows] is set in [SD Card Setup] (ÎChapter
4: SD Memory Card Security Function” in the onscreen Reference Manual)
Depending on the software application, the computer may not work properly if this func-
tion is used.
When switching to a different user with the Fast User Switching function, it may not be
possible to set the display settings. In this case, log-off all users, and retry the opera-
tion.
Windows
Windows/Antivirus Protection
42
Operation
Useful Information
Use the Windows Security Center function to protect Windows from damage by com-
puter viruses, etc.
Windows Security Center
zWhat is Windows Security Center?
The Windows Security Center allows centralized management of Windows security
information, and monitors antivirus measures and other Windows security settings
to ensure optimum safety.
Use the Windows Security Center function to protect your computer from damage
by viruses, etc.
Click [start] - [Control Panel] - [Security Center] to display the current settings for the
following security functions.
Windows Firewall
A security system for protecting the computer from unauthorized access via the
Internet or other external networks.
The firewall regulates the data exchanged between the computer and the external
network, so that only approved data can pass through.
At the time of purchase, the Windows Firewall is set to be enabled.
Automatic Updates
If your computer is connected to the Internet, this function regularly checks
whether security updates and other important updates for Windows have been
made available, and automatically installs these updates in their latest conditions.
Virus Protection
This function regularly checks whether antivirus software has been installed in the
computer, and whether the version of that software is the latest version available.
NOTE
zSome network-related software and some online network games do not operate
normally if the Windows Firewall is enabled. Ask the software manufacturer
about the Windows Firewall in the case of using such software.
zFor further details on the Windows Firewall, see the help displayed by the follow-
ing methods:
AClick [start] - [Help and Support] and input [Windows Firewall] into [Search].
BClick [Windows Firewall overview].
If the message "Your computer might be at risk" is displayed
Read the message, click the (red) on the notification area, and make the appropri-
ate settings.
This message, which the Windows Security Center displays to confirm the security-
related settings regularly, will be displayed until the settings are made more properly.
NOTE
zThis message does not indicate an error. You can use the computer while the
message is displayed. However, in order to operate the computer more safely,
we recommend making the appropriate measures to reduce damage from virus
and other attacks, thus avoiding the appearance of this message.
Security Center/Antivirus Protection
43
Operation
Useful Information
The Pop-up Blocker
In Windows XP, security functions have been strengthened with regard to Web con-
tents.
One of these is the "Pop-up Blocker," which may prevent some Web pages from being
displayed.
Computer Viruses
Users are advised to purchase the latest versions of virus protection software
and use them regularly.
We recommend you run the software:
zWhen booting your computer.
zAfter receiving data.
We recommend that you check data received on disks or from external sources, such
as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress
them before running a check).
Windows Update
You can use the latest patches and service packs for Windows with the following
menus.
Do not apply “Driver Updates” even if a message to update a driver appears. If a
driver update is required, contact your technical support office.
[start] - [All programs] - [Windows Update].
44
Operation
Useful Information
Using CD/DVD
Before using the drive
zDo not expose the DVD-ROM & CD-R/RW drive to excessive smoke that may leave
a residue, e.g. oil smoke, or tobacco smoke. Doing so could shorten the life of the
drive lens.
About opening or closing the disk cover/cleaning the
drive lens
zWhen the computer is on, be sure to use the open lever on the left side of the com-
puter or perform the ejecting operation through Windows.
When using Bs Recorder or B’s CLiP, you cannot open the cover using the open
lever. Refer to “Chapter 3: Writing to CDs (B’s Recorder/B’s CLiP)” in onscreen Ref-
erence Manual
zTo remove a disk when the disk cover cannot be opened or when the computer is
powered off, insert a pointed object (e.g., the bent-out tip of a paper clip, or the tip of
a ballpoint pen) into the emergency hole (A), and move in the direction of the arrow.
zBe careful not to do any of the following when the disk cover is open:
Do not close the display.
Be sure to close the display only after confirming the disk cover is closed. If the
disk cover is open, the LCD may become damaged.
Never insert foreign objects such as paper clips into the DVD-ROM & CD-R/RW
drive.
This could cause it to malfunction.
zThe disk cover can be opened up to an angle of 70 degrees. Do not force the cover
open any further.
If a hand or other object touches the disk cover and accidentally opens it wider than
70 degrees, pull it forward slowly until the stopper holds the cover in its proper posi-
tion.
zDo not leave the disk cover in the open position or touch the lens.
Over time, dust may build up on the lens, or on a disk. This may result in a read or
write malfunction.
zInsert the disk securely. If the disk cover is closed without inserting the disk securely,
it may become damaged.
zDo not access the drive until after the disk cover is closed and the DVD-ROM & CD-
R/RW drive status indicator is off.
zWe recommend cleaning the drive lens (B) with an air puffer used for camera lenses
(Do not use any spray lens cleaning products.)
While the DVD-ROM & CD-R/RW drive is being
accessed
zDo not open the DVD-ROM & CD-R/RW drive or move the computer while the DVD-
ROM & CD-R/RW drive is being accessed.
Doing so could cause the disk to shift position, which may damage the disk, or
cause the DVD-ROM & CD-R/RW drive to malfunction.
After running an application involving access to a disk, do not open the DVD-ROM &
CD-R/RW drive until after the application has been closed.
zDo not apply excessive force on the disk cover.
zDo not operate the open lever.
zDo not shock the computer by removing or inserting cables and cards, etc. This may
result in a read or write malfunction.
About recognition of media
zIt may take about 30 - 40 seconds for an image recorded to a rewritable media to be
played back.
45
Operation
Useful Information
Use of Peripheral Devices/Internal Hard Disk
Pay strict attention to the following points to avoid damage to the computer, peripheral
devices, cables, etc.
Also, in addition to following this manual and the onscreen Reference Manual, carefully
read the instruction manuals for the peripheral devices being used.
zUse only peripheral devices that conform to the computer’s specifications.
zConnect the devices properly, paying close attention to the condition and position of
the connectors.
zIf a connection cannot be made easily, do not apply undue force; check once more
to confirm the condition and position of the connector (alignment of pins, etc.).
zIf the connector has holding screws, fasten the screws firmly.
zDo not carry the computer with cables attached, and do not pull on the cables force-
fully.
To Protect Data
Keep the following.
zDo not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make
your software applications and data unusable.
zDo not power off your computer while software applications are running or
hard disk drive indicator is on.
Properly shut Windows down from the [start] menu to avoid problems. (Îpage 24)
zDo not place the Computer close to objects that emit electromagnetic waves
(magnets, electromagnetic bracelets, etc.).
The data saved on the hard disk may be erased.
zImportant data saved on the hard disk should be saved regularly (e.g., in case
of failures, unexpected data updates, erasure, etc.).
Regular backups are recommended as a means of minimizing damages in the
event of trouble.
zUse the security function for all important data.
(Î “Chapter 2: Security Measures” and “Chapter 4: SD Memory Card Security
Function” in onscreen Reference Manual)
When Changing Hard Disk Partitions
zDuring reinstallation, you can divide the hard disk space into two partitions by exe-
cuting: [Make two partitions, for the operating system and data, and reinstall Win-
dows to the operating system partition].
Confirm the minimum partition size required for the OS by checking the screen dur-
ing the reinstallation.
If you want to create three or more partitions, after creating an OS partition and a
data partition during the reinstallation, start up Windows, erase the second partition
once using [Disk Management], and then create the partitions in the open space.
When Using Peripheral Devices
Internal Hard Disk
46
Operation
Useful Information
When Disposing of This Computer
When disposing of or transferring ownership of this computer, erase all data on the
hard disk in order to prevent the theft of hard disk data. Even if you delete data or initial-
ize the hard disk through normal Windows commands, data can still be read using spe-
cial software. In order to erase all data, either have the data erased by a specialist (at a
charge) or use the hard disk data erase utility (included). (Note that this hard disk data
erase utility does not guarantee that data will be completely erased.)
Also, note that if you transfer ownership of this computer without deleting commercial
software that you have installed to the hard disk, you may be in violation of the licensing
agreement for that software.
47
Troubleshooting
List of Error Codes
When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions
shown below.
If the problem persists, or if the error code or message displayed is not shown here, contact your technical support
office.
Error Code/Message Action
0211: Keyboard error zIf an external keyboard is connected, disconnect these devices.
0251: System CMOS checksum
bad - Default configuration used An error has occurred in the memory that stores the Setup Utility settings. This
error occurs when the memory content is changed through some inadvertent
operation by a program or other function.
zRun the Setup Utility and load the default values, then change the settings to
the appropriate values as needed. (Îpage 31)
zIf the problem persists, the internal clock battery may need to be replaced.
Contact your technical support office.
0271: Check date and time set-
tings The date and time setting are incorrect.
zSet the date and time correctly in the [Main] menu of the Setup Utility.
(Îpage 33)
zIf the problem persists, the internal clock battery may need to be replaced.
Contact your technical support office.
0280: Previous boot incomplete -
Default configuration used Startup has failed repeatedly, so the Setup Utility settings have been returned to
their default values, and the computer has been booted.
zRun the Setup Utility and load the default values, then change the settings to
the appropriate values as needed. (Îpage 31)
Press <F2> to Setup zWrite down the error details and press the
F2
key to run the Setup Utility. Con-
firm the settings, and change the settings to the appropriate values as
needed. (Îpage 31)
Operating System not found The OS is not properly installed on the floppy disk or the hard disk that you are
trying to boot from.
zIf the computer cannot be booted from the floppy disk, check the floppy disk
drive to ensure that the disk is in fact bootable, and change it to another if not.
zIf the computer cannot be booted from the hard disk, confirm whether the hard
disk is properly recognized in the [Information] menu of the Setup Utility.
(Îpage 33)
If the hard disk is recognized (“xx GB” is displayed), perform the reinstal-
lation procedure.
If the hard disk is not recognized (“none” is displayed), contact your
technical support office.
zIf a device is connected to the USB port, disconnect the device, or run the
Setup Utility and set [Legacy USB Support] in the [Advanced] menu to [Dis-
able]. (Îpage 34)
Extended RAM Module Failed zIf the RAM module has not been inserted properly, or if a RAM module other
than one matching the specifications has been inserted, a beep will sound and
the message “Extended RAM Module Failed” will be displayed when turning
the power on. In this case, turn the power off, confirm that the RAM module
meets the specifications, and reinsert it.
48
Troubleshooting
Dealing with Problems (Summary)
If you encounter a problem, try the following methods.
zWindows Setup: Îbelow
zStarting up: Îbelow
zEnter Password: Îpage 49
zDisplay: Îpage 50
zSetup Utility: Îpage 51
zShutting Down: Îpage 51
zStandby/Hibernation Functions: Îpage 51
zBattery Indicator: Îpage 52
zOnscreen Reference Manual: Îpage 52
zDisk Operations: Îpage 52
zReinstalling B’s Recorder/B’s CLiP: Îpage 53
zSD Card Setup (SD Memory Card security function): Îpage 53
zFast User Switching Function: Îpage 53
zWireless LAN: Îpage 53
zExpanding Memory: Îpage 53
zOther Problems: Îpage 54
You can use the PC Information Viewer to check the computer’s usage status. (Îpage
55)
Windows Setup
During Windows setup, the process
does not move to the next screen
zSometimes it takes time to move to the next screen. Also, it may take two to
three minutes while the computer moves to the next screen from the [Date
and time settings] screen, and then restarts automatically. Wait, and do not
press any keys, or touch the touch pad, etc. (Îpage 19)
Starting Up
The power indicator or battery indi-
cator is not lit
zCheck the cable connection for the AC adaptor.
zCheck to see if a fully charged battery is properly inserted
zRemove the battery pack and disconnect the AC adaptor. Then reconnect
them.
The computer does not operate
when a USB device is connected
zThe computer may not operate when certain USB devices are connected.
Disconnect the USB device, or set [Legacy USB Support] to [Disable] in
[Advanced] menu of the Setup Utility (Îpage 34).
[Enter Password] is displayed zEnter your Supervisor Password or User Password. If you have forgotten
your password, contact your technical support office.
POST Startup Error(s) are displayed Îpage 47
Windows startup, or an operation is
extremely slow
zPress the
F9
key in the Setup Utility (Îpage 31). This will restore the
Setup Utilitys settings to their default values (except for the password, Sys-
tem Date and System Time). The Setup Utility must be run once again for
you to input the appropriate operating environment settings. (The process-
ing speed depends on the application software used, so this operation may
not cause the processing speed to increase.)
zIf operations slow down during streaming playback, try changing the num-
ber of colors of the display.
zIf you install resident software after purchasing this computer, disable the
resident software.
The date and time are incorrect zYou can set the date and time using the following menu:
[start] - [Control Panel] - [Date, Time, Language, and Regional Options] -
[Date and Time]
zIf you continue to experience problems, the internal battery maintaining the
clock may need to be replaced. Contact your technical support office.
zWhen the computer is connected to a LAN, confirm the date and time of the
server.
zThis computer will not correctly recognize the date and time starting from
the year 2100 A.D.
49
Troubleshooting
When resuming from the standby or
hibernation mode, [Enter Password]
does not appear even if a password
has been set in the Setup Utility
zEven when a password has been set in the [Security] menu of the Setup
Utility, [Enter Password] does not appear when the computer resumes from
the standby or hibernation mode. Use the Windows password as follows:
AClick [start] - [Control Panel] - [User Accounts] and click the
account for which the password will be set.
BAdd the check mark for [Prompt for password when computer
resumes from standby] in [Control Panel] - [Performance and
Maintenance] - [Power Options] - [Advanced].
When the administrator password is
forgotten
zIf you have created a password reset disk (Îpage 21), a message is dis-
played when you fail to correctly enter the password. Follow the message’s
instructions and set the password again by using the password reset disk.
If you have not created a password reset disk, after reinstalling setup Win-
dows and then set the password again.
When “Remove disks or other
media. Press any key to restart” (or
a similar message) is displayed
zThis means a floppy disk that dose not contain system startup information
has been left in the floppy disk drive. Remove the floppy disk, and press any
key.
zThis message may appear when certain USB devices are connected.
Remove the USB device, or set [Legacy USB Support] in the [Advanced]
menu of the Setup Utility to [Disable].
zIf the message still appears even after trying the above measures, this may
be an indication that some type of hard disk failure has occurred. Contact
your technical support office.
When the previous items are not the
cause
zPress the
F9
key in the Setup Utility. This will restore the Setup Utility’s
settings to their default values (except the password settings).
zTry removing all peripheral devices.
zCheck a disk error using the following procedure:
ADisplay [Local Disk (C:) Properties].
Click [start] - [My Computer], right-click [Local Disk(C:)] and click
[Properties].
BClick [Tools] - [Check Now].
CClick [Start] after selecting required items in [Check disk options].
zAt startup, hold down the
F8
key when [Panasonic] boot screen disap-
pears*1, and release your finger when the Windows Advanced Option Menu
is displayed. Start the computer in Safe Mode, and confirm the details of
the error.
*1 When [Password on boot] is set to [Enable], [Enter Password] appears after the
[Panasonic] boot screen disappears. Hold down the
F8
key soon after inputting the
password and pressing the
Enter
key.
Enter Password
Even after entering the password,
[Type your password] is displayed
again
zThe computer may be in “ten-key” mode.
If lights up, press the
NumLk
key to disable the ten-key mode, and then
input (Îpage 16).
zThe computer may be in Caps Lock mode.
If lights up, press the
Caps Lock
key to disable the Caps Lock mode,
and then input (Îpage 16).
Starting Up
Dealing with Problems (Summary)
50
Troubleshooting
Display
No display after powering on zWhen the external display is not visible
Check your cable connection to the external display
Confirm that your display is powered on
Check the settings for your external display
zThe display destination may be set to the external display.
Try changing the display destination by pressing the
Fn
+
F3
key.
If you want to switch the display destination repeatedly by pressing the
Fn
+
F3
key, make sure that the display destination has switched completely
each time before pressing the
Fn
+
F3
key again.
zPress the
Fn
+
F2
key and adjust the brightness.
The power has not been turned off,
but after a certain period of time,
there is no display
zHas the computer been set to the power-saving mode?
To resume operation of your computer when the display’s power is off (for
energy conservation purposes), press any key unrelated to the direct trig-
gering of a selection, like the
Ctrl
key.
zTo save power, your computer may have automatically entered the standby
mode (the power indicator blinks green) or hibernation mode (the power
indicator turns off). If so, slide the power switch.
When the battery pack is used, the
screen is darker than when the AC
adaptor is connected
zPress the
Fn
+
F2
key and adjust the brightness. Note, however, that when
the brightness is increased, the battery running time will become shorter.
Brightness can be set to separate levels for when the AC adaptor is con-
nected and when it is disconnected.
An afterimage appears (e.g., the key
green, red, and blue dots remain on
the display) or there are dots not dis-
playing the correct colors
zIf an image is displayed for a prolonged period of time, an afterimage may
appear. This is not a malfunction. The afterimage will disappear when a
different screen is displayed.
zHigh-precision and advanced technologies are used in the production of
color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the
picture’s elements either fail to light or remain constantly lit (that means that
more than 99.998% of the elements are functioning properly), this is not
considered a defect.
The screen becomes disordered zThe screen display may become distorted if the resolution or number of col-
ors is changed, or if an external display is connected or disconnected while
the computer is operating. Restart the computer.
The external display no longer
shows the correct image
zWhen an external display, not compatible with the power-saving mode, is
connected to the computer. The display may not function correctly when the
computer enters the power-saving mode. Turn off the power to the external
display.
When you want to display the fonts
or icons in a larger size
zChange the size of the icons, etc. using "Icon Enlarger (Î "Chapter 6: Icon
Enlarger" in onscreen Reference Manual).
zYou can also change the settings as follows (for more details, refer to the
Windows Help).
AClick [start] - [Control Panel] - [Appearance and Themes] - [Dis-
play] - [Appearance].
BSelect the font size in [Font size] and click [Effects]. Then add the
check mark for [Use large icons] to increase the icon size.
CClick [OK], then click [OK].
zTo enlarge a part of the screen, use "Loupe Utility" (Î "Chapter 6: Loupe
Utility" in onscreen Reference Manual).
51
Troubleshooting
During simultaneous display, if one
of the screens malfunctions
zTry changing the display by pressing the
Fn
+
F3
key
zIf you continue to experience problems, try changing the display destination
as follows:
AClick [start] - [Control Panel], from the [See Also] area click
[Other Control Panel Options], then click [Intel(R) Extreme
Graphics] - [Devices].
BClick the display destination. Then click [OK].
zWhen [Command Prompt] is set to “Full Screen” by pressing the
Alt
+
Enter
key, the screen is shown on only one of the displays. When the win-
dow display is restored by pressing the
Alt
+
Enter
key, the screen is
exhibited on both displays.
When a video such as an MPEG file
and a DVD video is being played
with WinDVD or Windows® Media
Player, the display destination can-
not be switched using the
Fn
+
F3
key
zThe display destination cannot be switched while a video such as an MPEG
file or a DVD video are playing. Stop playing the video before switching the
display destination.
The notification area icons on the
bottom right of the screen are hidden
and cannot be seen
zClick the icon on the notification area to display the hidden icons
zIf you want all icons to be displayed constantly, right-click on the taskbar,
click [Properties], and remove the check mark from [Hide inactive icons] in
[Taskbar].
Setup Utility
[Enter Password] is displayed zEnter the Supervisor Password or User Password. If you have forgotten
your password, contact your technical support office.
zThe [Advanced] and [Boot] menu
can not be registered
zSome items in [Security] menu
can not be registered
z
F9
does not work
zRestart the Setup Utility with the Supervisor Password.
Shutting Down
Windows cannot be shut down or
restarted
zIf a USB device is connected, try remove it.
zIs the connection to the ISP provider set properly?
If the setting are incorrect, Windows may not shut down, or may not start
up. For details of communication settings, refer to the ISP provider’s man-
ual.
zIs the LAN or wireless LAN set properly?
If settings are incorrect, Windows may not shut down, or may not start up.
Check with your provider or with your system administrator about LAN and
wireless LAN settings.
Standby/Hibernation Function
Unable to enter standby or hiberna-
tion mode zIf a USB device is connected to the computer, the standby or hibernation
function may not work properly. Simply remove the USB device. If the prob-
lem persists, restart the computer.
zIt may take a minute or two to enter standby or hibernation mode.
zThe computer may not enter standby mode properly and seems to be fro-
zen while the computer is communicating via the modem. If this happens,
slide the power switch for four seconds or more to forcibly turn your com-
puter off.
zIf there is a disk in the DVD-ROM & CD-R/RW drive that has been formatted
using Bs CLiP, the computer will not enter standby or hibernation mode.
Remove the disk.
Display
Dealing with Problems (Summary)
52
Troubleshooting
Unable to automatically enter
standby or hibernation mode
zIf a peripheral is connected to the computer, disconnect the device
zWhen the internal LCD is closed, the computer may not enter standby or
hibernation mode. In order to activate standby or hibernation automatically
while using the computer with the internal LCD closed, set [Touch Pad] to
[Disable] in the [Main] menu of the Setup Utility.
zIf there is a disk in the DVD-ROM & CD-R/RW drive that has been formatted
using Bs CLiP, the computer will not enter standby or hibernation mode.
Remove the disk.
The computer does not resume zDid you disconnect the AC adaptor or the battery pack while the computer
was in standby mode? If the computer's power supply is disconnected while
the computer is in standby mode all unsaved data will be lost.
zDid you slide the power switch and hold it for four seconds or more? If so,
the power will be turned off forcibly. In this case, all unsaved data will be
lost.
Battery Indicator
The red indicator is lit zThe battery level is very low (the charge is approx. 9% or less).
zConnect the AC adaptor. You can use the computer when the indicator light
is orange. If you do not have an AC adaptor, save your data and power off
your computer. After replacing the battery pack with a fully charged one,
turn your computer on again.
The red indicator blinks zQuickly save your data and power off your computer. Disconnect the AC
adaptor and remove the battery pack, then connect them again. If the prob-
lem persists, contact your technical support office. The battery pack or
charging circuit may be defective.
The orange indicator blinks zBattery cannot be recharged temporarily because the internal temperature
of the battery pack is beyond the acceptable temperature range for recharg-
ing. Once the allowable range requirement is satisfied, charging begins
automatically. Your computer can be used normally in this state.
Onscreen Reference Manual
The Reference Manual is not dis-
played
zIs Adobe Reader installed?
If you have uninstalled Adobe Reader, install using the following proce-
dures.
ALog on to Windows with the administrator authority.
BClick [start] - [Run], input [c:\util\reader\AdbeRdr60_enu_full.exe],
then click [OK].
Install Adobe Reader by following the instructions on the screen.
CUpdate Adobe Reader to its latest version.
If your computer is connected to the Internet, start up Adobe
Reader and click [Help] - [Update].
If your computer is not connected to the Internet, click [start] -
[Run], input [c:\util\reader\Acro-Reader_6.0.2_Update.exe], then
click [OK].
Disk Operations
If the DVD-ROM & CD-R/RW drive
vibrates excessively or is noisy
zIs the disk bent or labeled?
z
Check to see if the disk is inserted correctly, and it is in good condition. If the
disk is good and inserted correctly, set [CD/DVD Drive Speed] to [Low] in the
Setup Utility
(Î
page 33
).
zWhen writing to CD-R/RW using B's Recorder, you can minimize vibration
while writing by setting the writing speed at [8x] or less.
Standby/Hibernation Function
53
Troubleshooting
Cannot eject disk zIs the computer powered on?
Open lever works only when the computer is powered on.
To remove a disk when the computer is powered off, insert a pointed object
(e.g., the bent-out tip of a paper clip, or the tip of a pencil or ballpoint pen)
into the emergency hole, and then move it (Îpage 44).
Cannot play back TV programs
recorded on a commercial DVD
recorder
zIn the following cases, finalize the recording on the DVD recorder:
If the program was recorded in DVD-R/RW in video mode
If the program was recorded in DVD-RW in VR mode
Reinstalling B’s Recorder/B’s CLiP
When reinstalling, you will be asked
for a serial number
zInput the following serial number.
Bs Recorder:
Bs CLiP:
SD Card Setup (SD Memory Card security function)
Cannot log-on to Windows with the
SD memory card
zWindows log-on user name and password are not set in the SD memory
card correctly.
Enter the Windows user name and password without using the SD memory
card.
After logging on to Windows, set the same user name and the password on
the SD memory card and Windows, using one of the following operations:
Change the setting for the SD memory card [SD Card Setup]
Change the setting for Windows [Control Panel] (Î “Chapter 2: Security
Measures” in onscreen Reference Manual)
Fast User Switching Function
Some applications may not work
properly
zWhen switching to a different user with the Fast User Switching function,
the following problems may occur:
Some applications may not work properly.
Key combination with the
Fn
key may not work.
It may not be possible to set the settings of the display.
The wireless LAN cannot be used.
The Bs CLiP icon will no longer be shown on the notification area and
CD-RW disk cannot be written.
In this case, log-off all users without using Fast User Switching function,
and try the operation once more. If the problem persists, restart the com-
puter.
Wireless LAN
Wireless LAN cannot be used
Access point is not detected zWhen the wireless LAN function is turned off, turn it on using Intel®
PROSet/Wireless Software. (Îpage 40)
zCheck that the access point is powered on.
zFor detailed information, refer to “Chapter 7: Problems with Wireless LAN”
in onscreen Reference Manual.
Expanding Memory
You do not know the available RAM
module
Îpage 72
Cannot tell whether the RAM module
has been correctly installed
zYou can check whether the RAM module is recognized using the [Informa-
tion] menu in the Setup Utility. (Îpage 33)
If the RAM module is not recognized, turn the computer off and reinsert.
The RAM module has not been rec-
ognized
zMake sure the RAM module has been properly inserted.
zUse the RAM module that supports the recommended specifications
(Îpage 29).
Disk Operations
Dealing with Problems (Summary)
54
Troubleshooting
Other Problems
No response zPress the
Ctrl
+
Shift
+
Esc
key to open Task Manager and close the soft-
ware application that is not responding.
zIs there an input screen (e.g., password input screen at startup) hidden
behind another window? Use the
Alt
+
Tab
key to check for other windows
being displayed.
zAfter shutting down by sliding the power switch for more than four seconds,
slide the power switch to power on and open the application again. If the
program no longer works normally, delete the program using the following
menu. Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
When trying to play back video files
using Windows® Media Player, the
message [Codec required] appears,
and the file cannot be played back
zSome video files use a Codec that is not installed as a standard. In these
cases, if you play back the video file after connecting to the Internet, the
Codec may be downloaded automatically, allowing you to play back the file.
Cannot operate Fn keys (Îpage
28)
zIn the [Main] menu of the Setup Utility, is [Fn/Ctrl Key] set to [Replace]?
(Îpage 33)
Return the setting to [Normal], or press the
Ctrl
key instead of the
Fn
key
if you want to leave the setting in [Replace].
55
Troubleshooting
You can use the PC Information Viewer to check the computer’s usage status, and use
this information when calling your technical support office for advice. (If you have not
logged on to Windows with the administrator authority, some information will be dis-
played as [Not Found].)
Running PC Information Viewer
AClick [start] - [All Programs] - [Panasonic] - [PC Information Viewer] -
[PC Information Viewer].
Click on the items to display detailed information for each item.
zThe [PC Information Viewer] screen is always displayed on the top of
every other screen.
Save information to a file
Displayed information can be saved save to a text file (.txt).
ARun the PC Information Viewer and display the information you wish to
save.
BClick [Save].
zTo save the item that is displayed.
Click [Save only the information displayed] and click [OK].
Some of the hidden information on the screen, which cannot be shown
without scrolling the screen, will be saved, too.
zTo save all items.
Click [Save all the information] and click [OK].
CSelect the folder, input the file name, then click [Save].
Save a copy of the screen to a file
You can save a copy of the screen currently being displayed to a file in bitmap format
(.bmp).
ADisplay the screen you want to save.
BPress the
Ctrl
+
Alt
+
F8
key.
CWhen a message “The copy of the screen was saved...” is displayed, click
[OK].
[pcinfo.bmp] file will be saved in [My Documents] folder. If [pcinfo.bmp] file
already exists, it will be overwritten. (If [pcinfo.bmp] file is set as a “Read-only”
or “Hidden” file, the new file cannot be saved.)
z
To display the extension of the file, click [Tools] - [Folder Options] - [View]
from Explorer, and remove the check mark for [Hide extensions for known
file types] under the [Advanced settings] section.
NOTE
zYou can also save a copy of the screen to a file using the following procedure:
Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [Screen
Copy].
zAt the time of purchase, the computer is set so that a copy of the screen can be
saved to a file by pressing the
Ctrl
+
Alt
+
F8
key. This setting can be changed
using the following procedure:
AClick [start] - [All Programs] - [Panasonic] - [PC Information Viewer].
BRight-click [Screen Copy], and then click [Properties] - [Shortcut].
CMove the cursor to [Shortcut key], press the key to be used for the short-
cut, and then click [OK].
zColors are saved in 256 colors.
zWhen using an Extended Desktop:
A copy of the screen displayed on the primary device will be saved.
Check the Computer’s Usage Status
56
Getting Started
Troubleshooting
Information for Installed Applications
If the application software supplied with this computer does not function properly, care-
fully read the problem-solving section of this manual and onscreen Reference Manual
as well as the help Information.
If you can connect to the Internet, refer to “Frequently Asked Questions” and other sup-
port information available on the relevant homepage for the manufacturer of the appli-
cation software.
If you cannot find any hints or methods there to resolve your problem, forward your
question to the address shown below.
When forwarding an inquiry, include information on your computer’s usage conditions.
zB’s Recorder / B's CLiP
B.H.A.
• URL:
http://www.bhacorp.com/
E-mail addresses:
U.S./Canada (English): BHAxpsupport@bhacorp.com
Other countries (English, German, French, Italian, Spanish):
eurosupport@bhacorp.com
zWinDVD
InterVideo, Inc.
• URL:
http://www.intervideo.com/
Support Information:
Follow the steps below to contact InterVideo, Inc.
ADouble-click the icon, and start Internet Explorer.
BAccess http://www.intervideo.com/
CClick [Support] - [Customer Service] - [Support Request Form].
DClick [Language] and select the language.
EFill out the form and click [Submit].
zOther pre-installed software
Contact the Panasonic technical support office as listed in the “LIMITED WAR-
RANTY.
Confirm the contact information for the Panasonic technical support office using the
following procedure:
AClick [start], right-click on [My Computer], and click on [Properties].
BClick on [Support Information].
57
Troubleshooting
Reinstalling Software
What is “Reinstallation”?
Reinstallation refers to formatting the hard disk, and reinstalling Windows.
When is “Reinstallation” necessary?
zWhen Windows does not start up, or when Windows operation is unstable and can-
not be recovered.
zWhen using the hard disk with two partitions.
Preparing
zYou will need the Product Recovery DVD-ROM (included).
Confirm the following
zRemove all peripherals and SD memory cards/MultiMedia Cards. Especially, when
a USB floppy disk drive or a USB CD/DVD drive is connected, the reinstallation
does not operate properly. Remove them.
zEven if reinstallation is executed, the number of times that the DVD video region
code can be set will not be returned to the state set at the time of factory shipment.
Reinstallation Procedure
When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any crit-
ical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure.
The reinstallation procedure will return the computer to its original condition.
If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation pro-
cedure.
Before Reinstallation
Change the settings in the Setup Utility
Use the Product Recovery DVD-ROM to execute reinstallation. (About 20 minutes)
Return the Setup Utility settings to their default values.
Setup Windows.
Change the settings in the Setup Utility. (Only when necessary)
If you can connect to the Internet, perform Windows Update.
(Î “Chapter 8: To Update this Computer to its Latest Version” in onscreen Reference
Manual)
Reinstalling Software
58
Troubleshooting
1Connect the AC adaptor.
Do not interrupt the reinstallation procedure before completion, for example
by turning off the computer or pressing the
Ctrl
+
Alt
+
Del
key, as this
may prevent Windows from starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.
2Change the settings in the Setup Utility.
Make the following settings.
zReturn settings to the status at the time of shipment.
zChange settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the status of the computer from that at the time of purchase, we
recommend that you make a note of the settings that are changed.
ATurn on the computer, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
zIf the password has been set, enter the Supervisor Password, and
press the
Enter
key.
BPress the
F9
key.
At the confirmation message, select [Yes] and press the
Enter
key.
CSelect the [Boot] menu, then select [CD/DVD Drive] and press the
F6
key
until [CD/DVD Drive] is at the top of the [Boot] menu.
DPlace the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
zWhen the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-
form the following procedure.
Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
(The computer will restart)
Press the
F2
key while [Panasonic] boot screen is displayed.
Place the Product Recovery DVD-ROM, and execute step E.
Reinstalling
59
Troubleshooting
EPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
3Use the Product Recovery DVD-ROM to execute reinstalla-
tion.
APress the
1
key to execute [1. [Recovery]].
(All of the screens below are only examples.)
zThe provision to perform the reinstallation will be displayed.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled. If [Recovery] or
[Erase HDD] is executed, the Backup function will be disabled, and your
Backup data will be lost.] appears, press the
Y
key.
BIf you agree, press the
1
key.
If you do not agree, press the
2
key.
zIf you press the
1
key the menu will be displayed.
zIf you press the
2
key the reinstallation will be canceled.
CMake a selection from the menu.
zTo return the computer to its status at the time of purchase
Press the
1
key.
Reinstalling Software
60
Troubleshooting
zTo divide the hard disk into two partitions (for OS and data)
Press the
2
key.
Enter the basic partition size (GB) for the operating system installation
and press the
Enter
key.
You can cancel this operation by pressing the
0
key.
The data partition size is the remainder after subtracting the basic
partition size. (Data partition: 1 GB or more)
Maximum settable size differs depending on the model.
zTo reinstall Windows in the original partition without changing the parti-
tion configuration
Press the
3
key.
The first partition size must be 6 GB or more of the hard disk size.
Reinstallation cannot be performed with a small partition size.
<When the hard disk backup function has been enabled>
If you select [1] or [2], the message [The Backup function has been enabled.
If [Recovery] is executed, the Backup function will be disabled, and your
Backup data will be lost.] appears. In this case, press the
Y
key.
If the message [Computer must be rebooted in order to execute [Recovery.]]
appears, press the
R
key.
DAt the confirmation message, press the
Y
key.
zThe operation of reinstallation for the hard disk starts automatically.
(The operations take about 20 minutes.)
zDo not interrupt the reinstallation procedure before completion, for
example by turning off the computer or pressing the
Ctrl
+
Alt
+
Del
key, as this may prevent Windows from starting up, or may cause data
to be lost so that the reinstallation procedure cannot be executed.
EThe message "[Recovery] is complete" will be displayed. Remove the
Product Recovery DVD-ROM, and press any key to shut down the com-
puter.
4Return the Setup Utility settings to their default values.
Return the Setup Utility to its settings at the time of shipment to ensure
proper setup of Windows.
ATurn on the computer, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password, and press
the
Enter
key.
BPress the
F9
key.
At the confirmation message, select [Yes] and press the
Enter
key.
CPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
61
Troubleshooting
5Setup Windows. (Îpage 19)
6Run the Setup Utility and change the settings where neces-
sary.
(The Setup Utility settings will return to their default values. Even the security
settings with the exception of the password(s), date and time will return to
their default values.)
7If you can connect to the Internet, perform Windows
Update.
(Î “Chapter 8: To Update this Computer to its Latest Version” in onscreen
Reference Manual)
Changing the drive letter
You can change the drive letter for the DVD-ROM & CD-R/RW drive or hard disk drive
by the following steps.
zThe C: drive cannot be changed.
zDVD-ROM & CD-R/RW drive is the D: drive at the time of factory shipment.
zWe recommend that you make these changes before installing applications.
AClick [start] - [Control Panel] - [Performance and Maintenance] - [Admin-
istrative Tools] and double click [Computer Management].
BClick [Disk Management] from [Storage].
CRight click on the partition of the hard disk or the name of the DVD-ROM &
CD-R/RW drive and click [Change Drive Letter and Paths...].
DClick [Change].
EClick [Assign the following drive letter] and select the new drive letter, and
then click [OK].
FAt the confirmation message, click [Yes].
62
Important Information
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”)
ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH
THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY
DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses
their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to
achieve your intended results, and for the installation, use and results obtained therefrom.
LICENSE
A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Pro-
grams in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are
receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall
obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to
the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related
documentation, all of which title, ownership and rights shall remain with MEI or its suppliers.
B. You may use the Programs only on the single Product which was accompanied by the Programs.
C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not
distribute or otherwise make the Programs or related documentation available to any third party, by time-
sharing or otherwise, without the prior written consent of MEI.
D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documenta-
tion for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in
support of your use of the Programs on the single Product which was accompanied by the Programs. You
shall not modify, or attempt to modify, the Programs.
E. You may transfer the Programs and license them to another party only in connection with your transfer of the
single Product which was accompanied by the Programs to such other party. At the time of such a transfer,
you must also transfer all copies, whether in printed or machine readable form, of every Program, and the
related documentation, to the same party or destroy any such copies not so transferred.
F. You may not remove any copyright, trademark or other notice or product identification from the Programs
and you must reproduce and include any such notice or product identification on any copy of any Program.
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-
MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate
this license at any time by destroying, at your expense, the Programs and related documentation together with all cop-
ies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor
set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any
such termination, you agree to destroy, at your expense, the Programs and related documentation together with all cop-
ies thereof in any form.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND
BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-
MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,
ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-
TER OF THIS AGREEMENT.
About Intel® software products
The enclosed software products and documentation were developed at private expense, and are provided with
“RESTRICTED RIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in
FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government con-
stitutes acknowledgment of Intel's proprietary rights in the product.
63
Important Information
Contrat de licence d'usage limité
Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic® (le Produit) sont exclusivement concédés en
licence à l'utilisateur ultime (vous), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cides-
sous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions
des présentes.
Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concède l'utilisation par
les présentes. Vous assumez l'entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pour
obtenir les résultats escomptés, ainsi que de l'installation, de l'utilisation et des résultats obtenus.
License
A. A. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d'uti-
liser les Logiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne
recevoir qu'un droit limité d'utiliser les Logiciels et la documentation les accompagnant et vous vous
engagez à n'obtenir aucun droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la docu-
mentation les accompagnant ni visà-vis des algorithmes, concepts, dessins, configurations et idées
représentés par ou incorporés dans les Logiciels et la documentation les accompagnant, dont les titres, pro-
priété et droits resteront tous à MEI ou à leurs propriétaires.
B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.
C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez ni
distribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d'un tiers, par part-
age de temps ou de quelque autre manière que ce soit, sans l'autorisation écrite préalable de MEI.
D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la docu-
mentation les accompagnant pour quelque fin que ce soit, à l'exception d'une (1) copie des Logiciels à des
fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est
accompagné par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.
E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu'en rapport avec votre ces-
sion du Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette ces-
sion, vous devez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la
machine, de tous les Logiciels ainsi que de la documentation les accompagnant, à la même partie ou détru-
ire les copies non cédées.
F. Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de pro-
duit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur
toutes les copies des Logiciels.
Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs cop-
ies, de façon électronique ou mécanique, en tout ou en partie.
Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, à
l'exception de ce qui est expressément stipulé dans ce contrat.
Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l'exception de ce qui est autorisé au
paragraphe E ci-dessus, votre licence est automatiquement résiliée.
Termes, clauses et conditions
Cette licence n'est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d'une résiliation
antérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentation
les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée,
avec application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vous
ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez de
détruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme
que ce soit.
Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,
clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complète et exclusive du contrat conclu
entre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communi-
cation entre nous, relativement à l'objet du présent contrat.
64
Important Information
Hard Disk Backup Function
The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store)
hard disk contents or restore backed up contents to their original locations.
By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting
from operational errors or other factors. Also, you can back up or restore hard disk contents using this computer alone,
without having to use other media or peripheral devices.
At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup
area, the hard disk backup function will be enabled, and you will be able to back up your data. Note, that once the
backup function has been enabled, you will have to perform the reinstallation procedure to disable it again (Îpage 57).
You will need the Product Recovery DVD-ROM (included).
zDisconnect or remove all peripheral devices, SD memory cards, and MultiMedia
Cards. Take care to disconnect the USB floppy disk drive, as the backup area may
not be created properly while these devices are connected.
zBe sure the AC adaptor is connected to the computer.
zA backup area cannot be created if the hard disk is already divided into several par-
titions. Return the computer to its condition at the time of purchase (one partition
only), and create the backup area.
zTo divide the partition, make the selection when the backup area is created
(Îpage 66 step G).
zIf the partition configuration is changed (partitions created, size changed, etc.) after
the backup area has been created, it will no longer be possible to execute the
backup function. To change the configuration, it is necessary to return the computer
to its condition at the time of purchase, and then create the backup area again.
zThe hard disk backup function will only work for the internal hard disk. This function
does not work with an external hard disk.
zBackup and restore functions will not operate if the hard disk has been damaged.
zDo not use the NTFS file system compression function, as this may result in insuffi-
cient capacity of the backup area.
zIf the hard disk malfunctions, it will be impossible to read the data stored on it. We
recommend that you also back up important data to a location other than the hard
disk (an external hard disk or other media).
zExecute a disk error check using the following procedure.
ADisplay [Local Disk(C:) properties].
Right-click [Local Disk(C:)] in [start] - [My Computer], and click [Proper-
ties].
BClick [Check Now] from [Tools].
CIn [Check Disk], click [Start] without adding a check mark beside any of
the items.
If a message is displayed indicating that there is an error in the disk, dis-
play [Check Disk], and add a check mark for [Automatically fix file system
errors] and [Scan for and attempt recovery of bad sectors], click [Start],
and check for disk errors again.
zThe hard disk backup function does not accommodate dynamic disks. Do not con-
vert the hard disk to a dynamic disk.
The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when
the data is backed up or restored. Note that if an error occurs while data is being restored, whether as a result of an
unexpected malfunction, incorrect operation, or other reason, the data in the hard disk (data before restoration) may
be lost.
Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss
of data) as a result of the use of this function.
Preparing
Before Using a Hard Disk Backup Function
65
Important Information
NOTE
zRegarding backup area
Requires availability of at least half of the entire hard disk. Without sufficient
space available, the backup area cannot be created.
When the backup area is created, the usable hard disk capacity will be
reduced to less than half.
The backup area cannot be accessed from Windows. For this reason, backed
up data cannot be copied to CD-R or other removable disk media.
When the hard disk backup function is executed, data in the backup area will
be overwritten. If newly created or edited data is backed up later, data stored
previously in the backup area will be lost.
ATurn the computer on, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.
BSelect the [Boot] menu, then select [CD/DVD Drive] and press the
F6
key
until [CD/DVD Drive] is at the top of the [Boot] menu.
CPlace the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
When the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Perform
the following procedure.
Set [CD/DVD Drive Power] to [On].
Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The computer will restart.
Press the
F2
key while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
Set the Product Recovery DVD-ROM, and execute step D.
DPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The computer will restart. If [Enter Password] is displayed during the fol-
lowing procedures, input the Supervisor Password or the User Password.
This screen should appear.
EPress the
3
key to execute [3. [Backup]].
CAUTION
zWhen dividing the hard disk into partitions
Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard
disk backup function cannot be enabled after the hard disk has been partitioned.
Use step G to divide the hard disk.
Create a Backup Area
Hard Disk Backup Function
66
Important Information
FAt the confirmation message, press the
Y
key.
GSelect how to divide the hard disk from the menu.
<To create a backup area and enable the backup function without dividing
the hard disk>
Select [1].
<To create a backup area and divide hard disk into two partitions, for OS
and data>
Select [2], enter the partition size (GB), and press the
Enter
key.
You can cancel this operation by pressing the
0
key.
The data partition size will be the maximum settable size less the
number entered above.
The maximum settable size will differ depending on models.
HAt the confirmation message, press the
Y
key.
The backup area is then created.
IWhen the message [You must reboot in order to enable the Backup func-
tion.] appears, remove the Product Recovery DVD-ROM, and press any
key to restart the computer. The computer is restarted, then the backup
process will begin.
JWhen the message [[Backup] is complete] appears, press the
Ctrl
+
Alt
+
Del
key to restart the computer.
CAUTION
zDo not press the
Ctrl
+
Alt
+
Del
key until the message is displayed.
KAfter logging on to Windows, a message will appear advising that a new
device has been installed and that the computer must be restarted to
enable the settings. Select [Yes] to restart the computer.
NOTE
zThe [Boot] menu in the Setup Utility is set to start up from the DVD-ROM & CD-
R/RW drive. Change this setting if necessary.
zThe next time the backup or restore functions are executed, follow the proce-
dure for [Backing Up and Restoring Data] (Îpage 67).
67
Important Information
CAUTION
zBefore executing the backup function, execute a disk error check (Îpage 64).
zDo not interrupt the backup or restore functions before completion, for example
by turning off the power or pressing the
Ctrl
+
Alt
+
Del
key, as this may pre-
vent Windows from starting up, or may cause data to be lost so that the backup
and restore functions cannot be executed.
ATurn the computer on, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password or the User
Password.
BSelect [Exit] menu, then select [Hard Disk Backup / Restore] and press the
Enter
key.
At the confirmation message, select [Yes], and press the
Enter
key.
CSelect the operation to be executed from the menu.
<To back up hard disk contents to the backup area>
(1)Press the
1
key to execute [1. [Backup]].
(When dividing the hard disk into two partitions, select the backup
method at next screen.)
(2)At the confirmation message, press the
Y
key.
The backup process will begin.
<To restore backed up contents to the hard disk>
(1)Press the
2
key to execute [2. [Restore]].
(When data is backed up in two partitions, select the restore method
at next screen.)
(2)At the confirmation message, press the
Y
key.
The restore process will begin.
NOTE
zThe time required to complete the backup or restore process differs depending
on the data volume.
DWhen the message [[Backup] is complete] or [[Restore] is complete] is
displayed, press the
Ctrl
+
Alt
+
Del
key to restart the computer.
If the backup or restore process was interrupted before completion,
for example if the power was turned off, execute the process again.
When a new device is installed and a message appears advising that
the computer must be restarted to enable the settings, select [Yes] to
restart the computer.
CAUTION
zWhen the hard disk backup function has been enabled, the backed up data will
not be erased even if a commercial data erasing utility or similar software is
used to erase all data from user-accessible area. You can use the hard disk data
erase utility included in this computer (Îpage 69) to erase all data on the hard
disk, including backed up data. Use this hard disk data erase utility before dis-
posing of or transferring ownership of this computer.
zOccasionally, the message [#1805 cannot write image file] will be displayed, and
the backup function will be interrupted. If this error occurs, execute the backup
function again. After this, if the backup function is completed properly, then
there is no problem in the hard disk.
Backing Up and Restoring Data
Hard Disk Backup Function
68
Important Information
zTo disable the hard disk backup function
Perform the reinstallation procedure. All data in the backup area and the hard disk
will be erased.
Conduct steps 1-3A for [Reinstalling Software] (Îpage 59). Select [1] or [2] to
execute the reinstallation at the screen for executing the reinstallation.
When [1] is selected, the hard disk backup function can be disabled.
When [2] is selected, the hard disk backup function can be disabled, but in this
case, because the hard disk has been divided into partitions, the hard disk backup
function cannot be re-enabled (Îpage 45).
When [3] is selected, the hard disk backup function cannot be disabled.
<When the hard disk backup function has been enabled>
If you select [3] in step 3C (Îpage 59) and execute reinstallation, the drive name for
the second partition (data partition) may be switched with that of the SD Memory Card.
You can still use the drives after the names have been switched, but you can also return
the drive names to their original state using the following procedures.
(The following procedure assumes that before reinstallation, the second partition (data
partition) was Drive D:, and the SD Memory Card was Drive E:)
ADisable the drive name for the second partition (data partition).
(1) Click [start] - [Control Panel] - [Performance and Maintenance] -
[Administrative Tools] and double click [Computer Management].
(2) Click [Disk Management] from [Storage].
(3) Right click on the partition for which [E:] is displayed and click
[Change Drive Letter and Paths...].
(4) Click [Remove].
(5) At the confirmation message, click [Yes].
BChange the SD memory card drive name to [E:].
Use the SD drive name change tool to change the SD Memory Card to the
E: drive. (Î "Chapter 4: SD Memory Card/MultiMedia Card" in onscreen
Reference Manual).
CSet the drive name for the second partition (data partition) as [D:].
(1) Click [start] - [Control Panel] - [Performance and Maintenance] -
[Administrative Tools] and double click [Computer Management].
(2) Click [Disk Management] from [Storage].
(3) Right click on the partition for which the drive name is not displayed,
and click [Change Drive Letter and Paths...].
(4) Click [Add...], assign [D:] as the drive letter, and click [OK].
69
Important Information
Hard Disk Data Erase Utility
This computer is equipped with a utility for erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of
hard disk data following the steps below.
Preparing
zYou will need the Product Recovery DVD-ROM (included).
Confirm the followings
zBe sure the AC adaptor is connected until the procedure is completed.
zThis utility can only be used for internal hard disk. It cannot be used to erase data
from external hard disks.
zThis utility cannot erase data from damaged disk.
zThis utility cannot erase data for specific partitions.
zAfter executing this utility, the computer cannot be booted from the hard disk.
zThe backup area and the data in the backup area will be erased.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled. If [Erase HDD] is exe-
cuted, the Backup function will be disabled, and your Backup data will be lost.] appears,
press the
Y
key.
When the message [Computer must be rebooted in order to execute [Erase HDD.]]
appears, press the
R
key.
ATurn the computer on, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password, and press
the
Enter
key. The [Boot] menu cannot be changed with User Pass-
word.
BSelect the [Boot] menu, then select [CD/DVD Drive] and press the
F6
key
until [CD/DVD Drive] is at the top of the [Boot] menu.
CPlace the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
zWhen the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-
form the following procedure.
Set [CD/DVD Drive Power] to [On].
Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-
tions or other operational errors, data may not be completely erased. There are also specialized devices that may be
able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-
mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no
responsibility for losses or damages suffered as a result of the use of this utility.
Before Erasing Data
Completely Erasing Data
Hard Disk Data Erase Utility
70
Important Information
The computer will restart.
Press the
F2
key while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
Set the Product Recovery DVD-ROM, and execute step D.
DPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the
Supervisor Password or User Password.
EWhen the message "Select a number" is displayed, press the
2
key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the
0
key.)
The confirmation message will be displayed.
FPress the
Y
key.
Hard Disk Data Erase Utility will start.
(All of the screens below are only examples.)
GWhen [<<<Start menu>>>] is displayed, press the
Enter
key.
HThe approximate time required for erasing data will be displayed.
Press the
Space
key.
IAt the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
zIf necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.
71
Important Information
JThe message "Hard disk data has been deleted" will be displayed.
Remove the Product Recovery DVD-ROM, and press any key to shut
down the computer.
zIf a problem occurred during the operation, an error message will be
displayed.
72
Important Information
Specifications
zMain Specifications
Model No. CF-W4FWCZZBM
CPU/
Secondary cache memory Intel® Pentium® M Processor 753 (1.20 GHz, 2 MB*1 L2 cache, 400 MHz FSB)
Chip Set Intel® 855 GM chip set
Main Memory 512 MB*1, DDR SDRAM (1024 MB*1 Max.)
Video Memory UMA (64 MB*1 Max.)*2
Hard Disk Drive Approx. 40 GB*3
DVD-ROM & CD-R/RW Drive Buffer underrun error prevention function: Supported
Continuous Data Transfer Speed*4*5/
Playback
zDVD-RAM*6: 2X speed (4.7 GB*3)/1X speed (2.6 GB*3)zDVD-R*7: 4X speed (Max.)
zDVD-RW: 4X speed (Max.) zDVD-ROM*8: 8X speed (Max.) zCD-ROM*8: 24X speed
(Max.) zCD-R*8: 24X speed (Max.) zCD-RW*8: 24X speed (Max.)
Continuous Data Transfer Speed*4*5/
Recording
zCD-R write*9: 4X speed, 8X speed, 8-16X speed, 8-24X speed zCD-RW write: 4X
speed zHigh-Speed CD-RW write*10: 4X speed, 8X speed,10X speed zUltra-Speed
CD-RW write*10: 8X speed, 10X speed, 8-16X speed*11
Compatible Disk and Compatible For-
mats*5/Playback
zDVD-ROM (Single Layer, Dual Layer) zDVD-Video zDVD-R*7(1.4 GB, 3.95 GB, 4.7
GB)*3zDVD-RW (Ver.1.1/1.2 1.4 GB, 4.7 GB, 9.4 GB)*3zDVD-RAM*6 (1.4 GB, 2.8 GB,
2.6 GB, 5.2 GB, 4.7 GB, 9.4 GB)*3zCD-Audio zCD-ROM (XA compatible) zCD-R
zPhoto CD (multiple session compatible) zVideoCD zCD-EXTRA zCD-RW zCD-
TEXT
Compatible Disks and Compatible For-
mats*5/Recording zCD-R zCD-RW
Display Method 12.1 XGA type (TFT) (1024 × 768 dots)
Internal LCD Display 65,536/16,777,216 colors (1024 × 768 dots)*12
External Display*13 65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 1024 dots/1600 ×
1200 dots)
Simultaneous Display on LCD + Exter-
nal Display*13 65,536/16,777,216 colors (800 × 600 dots, 1024 × 768 dots)*12
Wireless LAN Built-in Intel® PRO/Wireless 2915 ABG (Îpage 74)
LAN*14 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Modem Data: 56 kbps (V.92) FAX: 14.4 kbps
Sound WAVE and MIDI playback, Monaural Speaker (built in)
Card Slots PC Card Slot ×1: (One Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA)
SD Memory Card Slot*15 ×1
RAM Module Slot 172-pin, 2.5 V, Micro DIMM, DDR SDRAM, PC2100 Compliant*16
Interface USB Ports ×2USB2.0 ×2*17 / Modem PortRJ-11/ LAN PortRJ-45*14 /
External Display Port: Mini Dsub 15-pin female / Microphone Jack: Miniature jack, 3.5
DIA / Headphone Jack: Miniature jack, 3.5 DIA
Keyboard/Pointing Device 85 keys/Touch Pad
Power AC adaptor or Battery pack
AC Adaptor*18 Input: 100 V- 240 VAC, 50 Hz/60 Hz
Output: 16 V DC, 2.5 A
73
Important Information
*1 1MB = 1,048,576 bytes
*2 A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video
Memory cannot be set by the user.
*3 1GB = 1,000,000,000 bytes. Operating system or some application software will report as fewer GB.
*4 Data transfer speeds indicate values measured by Matsushita Electric Industrial Co., Ltd. The data transfer rate of DVD per 1X
speed is 1,350 KB/s. The data transfer rate of CD per 1X speed is 150 KB/s.
*5 Performance of CD-R, CD-RW, DVD-RAM, DVD-R, and DVD-RW cannot be guaranteed depending on writing status and record-
ing format. Also, some data cannot be played back depending on the disk, settings, and environment being used.
*6 In the case of DVD-RAM, only non-cartridge disks or removable cartridge disks can be used.
*7 DVD-R is compatible with 4.7 GB (for General) playback. DVD-R (for Authoring) playback is compatible with disks recorded using
Disk-at-Once recording.
*8 If an unbalanced disk (e.g., a disk with which the balance has been displaced from the center) is inserted, the speed may become
slower if there are large vibrations while the disk is rotating.
*9 Depending on the disk, the writing speed may become slower.
*10 Does not support 24X speed rewriting.
*11 Does not support 4X speed.
*12 A 16,777,216 color display is achieved by using the dithering function.
*13 Display may be impossible using some connected external displays.
*14 Some devices cannot be used depending on the port type.
*15 Operation has been confirmed for Panasonic SD memory cards with up to 1 GB capacity. The transfer rate using the SD memory
card slot on this computer is 2 MB per second (this is a theoretical value, and differs from actual speeds). The transfer rate is 2
MB per second even if you use an SD memory card that supports high-speed transfer rates. Does not guarantee connection/
operation of all SD devices. Does not support SD I/O.
*16 A PC2700-compliant RAM module added to this computer, operates at the same speed as a PC2100-compliant RAM module.
*17 Does not guarantee operation of all USB-compatible peripherals.
*18 <Only for North America>
The AC adaptor is compatible with power sources up to 240
V
AC adaptor. This computer is supplied with a 125
V
AC compatible AC cord.
*19 Varies depending on the usage conditions, CPU speed, etc.
*20 Measured using BatteryMark™ Version 4.0.1 (LCD brightness: Maximum - Minimum)
*21 Measured using MobileMark™ 2002 (LCD brightness: 60 cd/m2)
*22 Varies depending on the usage conditions, CPU speed, etc.
It may take a long time to charge a fully discharged battery.
*23 Approx. 1.5 W when the battery pack is fully charged (or not being charged) and the computer is off.
*24 Rated power consumption.
Battery Pack Li-ion 7.4 V, 7.05 Ah
Operating Time*19 Approx. 4 hours - 7.5 hours*20 (Approx. 5.5 hours*21)
Charging Time*22 Approx. 4.5 hours
Power Consumption*23 Approx. 35 W*24/ Approx. 40 W (maximum when recharging in the ON state)
Physical Dimensions (W × H × D) 268 mm × 27.5 mm (at the front)/41.5 mm (at the rear) × 209.2 mm (excluding
protrusion) {10.6 " × 1.1 " / 1.7 " × 8.3 "}
Weight Approx. 1310 g {2.9 lb.}
Environment
Operation Temperature 5°C to 35°C {41°F to 95°F}
Humidity 30% to 80% RH (No condensation)
Storage Temperature -20°C to 60°C {-4°F to 140°F}
Humidity 30% to 90% RH (No condensation)
zMain Specifications
Model No. CF-W4FWCZZBM
Specifications
74
Important Information
*1 Operations of this computer are not guaranteed except for the pre-installed OS.
*2 Preinstalled B’s CLiP does not support CD-R.
*3 The Product Recovery DVD-ROM is required.
*4 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.
zMain Specifications
OS*1Microsoft® Windows® XP Professional with Service Pack 2 with Advanced Security Technologies
(NTFS File system)
Pre-installed Software*1
Microsoft® Internet Explorer 6 Service Pack 2 / DirectX 9.0 c /
Microsoft® Windows® Media Player 9 / Microsoft® Windows® Movie Maker 2.1
Adobe Reader, Intel® PROSet/Wireless Software, SD Utility, Icon Enlarger, Loupe Utility, Touch Pad
Utility, DMI Viewer, PC Information Viewer, WinDVD™5 (OEM Version), B’s Recorder GOLD8
BASIC, B’s CLiP 6*2, Hotkey Settings, Optical Disc Drive Power-Saving Utility, Wireless LAN Switch
Setup Utility, Hard Disk Data Erase Utility*3, Hard Disk Backup Utility*3
zWireless LAN
Data Transfer Rates
IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*4
IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)*4
IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*4
Standard Supported IEEE802.11a/IEEE802.11b/IEEE802.11g
Transmission Method OFDM system, DSSS system
Wireless Channels Used IEEE802.11a: channels 36/40/44/48/52/56/60/64/149/153/157/161/165
IEEE802.11b/ IEEE802.11g: channels 1 to 11
RF Frequency Band IEEE802.11a: 5.18 - 5.32 GHz, 5.745 - 5.825 GHz
IEEE802.11b/ IEEE802.11g: 2412 - 2462 MHz
75
Outline of the International
E
NERGY
S
TAR® Office Equipment Program
The international
E
NERGY
S
TAR® Office Equipment Program is an international program
that promotes energy saving through the use of computers and other office equipment.
The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors
can participate voluntarily. The targeted products are office equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among
participating nations.
As an
E
NERGY
S
TAR® Partner, Matsushita Electric Industrial Co., Ltd. has
determined that this product meets the
E
NERGY
S
TAR® guidelines for energy
efficiency.
Index
Also, refer to onscreen Reference Manual. Some explanations that are not described in this manual may be described
in onscreen Reference Manual. (Îpage 12)
Antivirus Measures ........... 42
Battery Pack Indicator....... 16
Dealing with Problems
.................................... 52
Caps Lock ........................ 16
Clicking ............................26
Disk Operations (Dealing with
Problems) ........................ 52
Display
Dealing with Problems
.................................... 50
Display Change...........28
LCD Brightness Control
.................................... 28
Double-Clicking ................ 26
Double-Tapping ............... 26
Dragging .......................... 26
DVD-ROM & CD-R/RW Drive
.......................................... 44
Indicator.......................16
Usage Precautions ......11
Emergency Hole .............. 44
Enter Password (Dealing with
Problems) ........................ 49
Fast User Switching Function
(Dealing with Problems) .. 53
Hard Disk Drive Indicator . 16
Hibernation Function (Deal-
ing with Problems)............ 51
Important Tips .................. 12
Maintenance .................... 38
Notification Area .............. 22
NumLk ............................. 16
PC Information Viewer ..... 55
Peripheral Devices .......... 45
Popup Window ................ 28
Power Indicator ................ 16
RAM Module (Dealing with
Problems) ........................ 53
Reference Manual ........... 12
Dealing with Problems
.................................... 52
Reinstalling B’s Recorder/B’s
CLiP (Dealing with Problems)
.......................................... 53
Right-Click ....................... 26
ScrLk Indicator .................16
Scroll ................................26
SD Card Setup (Dealing with
Problems) .........................53
SD Memory Card Indicator
......................................... 16
Setup Utility ...................... 31
Speaker On/Off Switch
..........................................28
Standby Function (Dealing
with Problems)...................51
Starting Up (Dealing with
Problems) .........................48
Tapping ............................26
Volume Control .................28
Windows Update ..............43
A
B
C
D
E
F
H
I
M
N
P
R
S
T
V
W
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Japan
FJ0205-0
DFQX5529ZA

Navigation menu