Panasonic of North America 9TGWL13A Wireless Network Adapter User Manual

Panasonic Corporation of North America Wireless Network Adapter Users Manual

Users Manual

OPERATING INSTRUCTIONSTablet ComputerModel No. FZ-R1 seriesPlease read these instructions carefully before using this product, and save this manual for future use.ContentsRead Me FirstSafety Precautions .....................................2Mesures de sécurité .................................10Regulatory Information .............................18Getting StartedIntroduction ...............................................26Description of Parts ..................................28First-time Operation ..................................32Basic OperationTurning On / Turning Off ........................... 39Payment Function.....................................41Useful InformationHandling and Maintenance .......................45Installing Software ....................................52TroubleshootingTroubleshooting (Basic) ............................58AppendixLIMITED USE LICENSE AGREEMENT ....65Specications ...........................................69LIMITED WARRANTY ..............................75
2Read Me FirstSafety PrecautionsTo reduce the risk of injury, loss of life, electric shock, re, malfunction, and damage to equipment or property, always observe the following safety precautions.Explanation of symbol word panelsThe following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disre-garded and improper use is performed. DANGERDenotes a potential hazard that will result in serious injury or death. WARNINGDenotes a potential hazard that could result in serious injury or death. CAUTIONDenotes a hazard that could result in minor injury.NOTICEDenotes a hazard that could result in property damage.The following symbols are used to clas-sify and describe the type of instruc-tions to be observed.This symbol is used to alert users to a specic operating procedure that must not be performed.This symbol is used to alert us-ers to a specic operating pro-cedure that must be followed in order to operate the unit safety. DANGERPrecautions on the Battery PackElectrolyte leakage, generation of heat, ignition or rupture of the Bat-tery Pack may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Do Not Deform, Disassem-ble, or Modify the Battery Pack Do Not Short the Positive (+) and Negative (-) Con-tactsÖ Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
3Read Me First DANGERPrecautions on the Battery Pack Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc.Ö If this product is subjected to a strong impact, dam-aged or deformed, stop using it immediately. Do Not Charge the Battery Using Methods Other Than Those Specified Do Not Use the Battery Pack with Any Other Prod-ucty The battery pack is re-chargeable and was in-tended for the specied product. Do Not Use This Product with a Battery Pack Other Than the One SpecifiedÖ Use only the specied bat-tery pack with your prod-uct. When the Battery Pack Has Deteriorated, Replace It With a New OneÖ Do not continue to use a damaged battery pack. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) DANGERPrecautions on the Built-in Bridge Battery (for disposal)<Only for model with Built-in Bridge Battery>When disposing the battery, gen-eration of heat, ignition or rupture of the Built-in Bridge Battery may result. ( page 50)Handling This Computer Do Not Disassemble the Computer Except When DisposingHandling the Built-in Bridge Battery Do Not Short the Positive (+) and Negative (-) Con-tacts Do Not Throw the Battery into a Fire or Expose It to Excessive Heat Do Not Apply Shocks to the Built-in Bridge Battery by Dropping It, Applying Strong Pressure to It, etc. Do Not Charge Do Not Use Do Not Deform, Disassem-ble, or Modify the Battery Pack Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example)
4Read Me FirstSafety Precautions WARNING<Only for model with Built-in Bridge Battery>Generation of heat, ignition or rup-ture of the Built-in Bridge Battery may result. Do Not Throw This Product Into a Fire or Expose It to Excessive Heat Do Not Deform, Disassem-ble, or Modify This product Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. Do Not Charge the Battery Using Methods Other Than Those Specified Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example) When the Battery Has Deteriorated, Contact Your Technical Support Office to Replace the Battery WARNINGFire or electric shock may result. Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly.Ö Do not continue to use a damaged AC cord, AC plug and AC adaptor.y Contact your technical support ofce for repair. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC OutletÖ Connecting to a DC/AC converter (inverter) may damage the AC adap-tor. On an airplane, only connect the AC adaptor/charger to an AC outlet specically approved for such use. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Do Not Disassemble This Product Do Not Touch This Product In a Thunderstorm If Con-nected with the AC Cable or Any Other Cables
5Read Me First WARNING If a Malfunction or Trouble Occurs, Immediately Stop Use If the Following Malfunc-tion Occurs, Immediately Unplug the AC Plug and the Battery Packy This product is damagedy Foreign object inside this producty Smoke emittedy Unusual smell emittedy Unusually hotÖ After the above procedure, contact your technical sup-port ofce for repair. Clean Dust and Other Debris of the AC Plug Regularlyy If dust or other debris ac-cumulates on the plug, humidity, etc. may cause a defect in the insulation. Insert the AC Plug Com-pletelyÖ Do not use a damaged plug or loose AC outlet. Close the Connector Cover Tightly When Using This Product Wherever There is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc.Ö If foreign matter has found its way inside, immediate-ly turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support ofce. WARNINGBurns or low-temperature burns may result. Do Not Use This Product in Close Contact With Your Body For a Long Period of TimeÖ Do not use this product with its heat-emitting parts in close contact with your body for long periods of time.y Low-temperature burns may result. Do Not Touch The Surface of The AC Adaptor Contin-uously While Using/Charg-ingy Burns may result.Detrimental health effects on your body may result. Do Not Turn the Volume Up To Loud When Using Head-phonesy Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hear-ing.
6Read Me FirstSafety Precautions CAUTIONFire or electric shock may result. Do Not Move This Product While the AC Plug Is Con-nectedÖ If the AC cord is damaged, unplug the AC plug imme-diately. Do Not Subject the AC Adaptor To Any Strong ImpactÖ Do not continue to use the AC adaptor after a strong impact such as being dropped.Ö Contact your technical support ofce for repair. Do Not Leave This Product in High Temperature Envi-ronment for a Long Period of Timey Leaving this product where it will be exposed to ex-tremely high temperatures such as near re or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Hold the Plug When Un-plugging the AC Plug Use Only the Specified AC Adaptor With This ProductÖ Do not use an AC adaptor other than the one sup-plied (supplied with the unit or one sold separately as an accessory).This product may fall over or drop, resulting in an injury. Do Not Place This Product on Unstable Surfaces Avoid Stacking
7Read Me First CAUTIONDetrimental health effects on your body may result. Take a Break Of 10-15 Min-utes Every Houry Using this product for long periods of time may have detrimental health effects on the eyes or hands.Burns, low-temperature burns, or frostbite may result. Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold EnvironmentÖ When it is necessary to expose the skin to this product such as to scan a ngerprint, perform the operation in the shortest time possible.NOTICEl Do not place the computer near a television or radio receiver.l Keep the computer away from magnets. Data stored on the ash memory may be lost.l This computer is not intended for the display of images for use in medical diagnosis.l This computer is not intended for a use with connection of medical equipment for the purpose of medi-cal diagnosis.l Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product.l Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.l Do not expose the battery pack to water, or allow it to become wet.l If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.l This computer prevents overcharg-ing of the battery by recharging only when the remaining power is less than approx. 95% of capacity.l The battery pack is not charged when the computer is rst pur-chased. Be sure to charge it before using it for the rst time. When the AC adaptor is connected to the computer, charging begins automat-ically.
8Read Me FirstSafety Precautionsl Should the battery leak and the uid get into your eyes, do not rub your eyes. Immediately ush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE l The battery pack may become warm during recharging or normal use. This is completely normal.l Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 °C to 50 °C {32 °F to 122 °F}). ( Refer-ence Manual “Battery Power”) Once the allowable range requirement is satised, charging begins automati-cally. Note that the recharging time varies based on the usage condi-tions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.)l If the temperature is low, the operat-ing time is shortened. Only use the computer within the allowable tem-perature range.l This computer has a high tempera-ture mode function that prevents the degradation of the battery in high temperature environments. ( Reference Manual “Battery Power”) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode.l The battery pack is a consum-able item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its per-formance, the battery pack should be replaced with a new one.l When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.l <Only for model with Built-in Bridge Battery> To minimize deterioration of the built-in bridge battery, connect the computer to the AC adaptor and re-charge it for approximately 2 hours about once every year.
9Read Me FirstTHIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NU-CLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSUR-ING HUMAN LIFE OR SAFETY. PAN-ASONIC WILL NOT BE RESPONSI-BLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES. *1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electronic Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of ight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circu-lar) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36. *2 As dened by the European Medical Device Directive (MDD) 93/42/EEC.Panasonic cannot guarantee any specications, technologies, reliability, safety (e.g. Flammability/Smoke/Tox-icity/Radio Frequency Emission, etc) requirements related to aviation stan-dards that exceed the specications of our COTS (Commercial-Off-The-Shelf) products.This computer is not intended for use in medical equipment including life-support systems, air trafc control sys-tems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc.This computer has been designed so as to minimize shock to the LCD and ash memory drive, etc., but no war-ranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling.
10Read Me FirstMesures de sécuritéPour réduire tout risque de blessure, de décès, d’électrocution, d’incendie ou de dysfonctionnement, respectez toujours les mesures de sécurité suiv-antes.Explication des symbolesLes symboles suivants sont utilisés pour classer et décrire le degré de danger, de blessure et de dommages matériels causés si ces symboles sont ignorés et le produit est utilisé de manière inappropriée. DANGERIndique un danger potentiel qui provo-quera des blessures graves voire la mort. AVERTISSEMENTIndique un danger potentiel qui pour-rait provoquer des blessures graves voire la mort. ATTENTIONIndique un danger potentiel qui pourrait provoquer des blessures mineures.AVISIndique un danger qui pourrait provo-quer des dommages matériels.Les symboles suivants sont utilisés pour classer et décrire le type d’instruc-tions à suivre.Ce symbole est utilisé pour alerter les utilisateurs qu’une procédure d’utilisation spéci-que ne doi pas être effectuée.Ce symbole est utilisé pour alerter les utilisateurs qu’une procédure d’utilisation spéci-que doit être respectée de-façon à faire fonctionner l’ap-pareil en toute sécurité. DANGERPrécautions à prendre au sujet de la batterieDes fuites d’électrolytes et une production de chaleur sont pos-sibles, la batterie risque également de prendre feu ou de casser. Ne pas jeter la batterie au feu et ne pas la soumettre à une chaleur excessive Ne pas insérer d’objets pointus dans la batterie, ne pas la démonter et n’y apporter aucune modifica-tion Ne pas mettre la borne positive (+) en court-circuit avec la borne négative (-)Ö Ne pas mettre la batterie en contact avec des objets tels que des colliers ou des épingles pendant le transport ou le stockage.
11Read Me First DANGERPrécautions à prendre au sujet de la batterie Ne pas soumettre le pro-duit aux secousses ni aux chocs, ne pas le soumettre à une pression excessive, etc.Ö Si ce produit subit un choc violent, est endommagé ou déformé, cesser immé-diatement l’utilisation. Ne pas charger la batterie en appliquant des mé-thodes autres que celles indiquées Ne pas utiliser la batterie avec un autre produity La batterie est recharge-able et a été conçue pour un produit spécique. Ne pas utiliser ce produit avec une batterie autre que celle spécifiéeÖ N’utiliser que la batterie spéciée avec le produit. Si le fonctionnement de la batterie se dégrade, rem-placez- la par une neuveÖ Ne pas continuer d’utiliser une batterie endommagée. Éviter les chaleurs ex-trêmes (proximité d’un feu, lumière directe du soleil, par exemple) DANGERPrécautions pour la batterie relais intégrée (pour l’élimination)<Pour modèles avec batterie relais intégrée uniquement>Lors de l’élimination de la batte-rie, une production de chaleur est possible, la batterie relais intégrée risque également de prendre feu ou de casser. ( page 50)Manipulation de cet ordinateur Ne pas démonter l’ordinateur excepté lors de la mise au rebutManipulation de la batterie relais intégrée Ne pas mettre la borne positive (+) en court-circuit avec la borne négative (-) Ne pas jeter la batterie au feu et ne pas la soumettre à une chaleur excessive Ne pas soumettre à des chocs la batterie relais in-tégrée en la faisant chuter, en la soumettant à une pression excessive, etc. Ne pas charger Ne pas utiliser Ne pas déformer, démonter ou modifier la batterie Éviter les chaleurs ex-trêmes (proximité d’un feu, lumière directe du soleil, par exemple)
12Read Me FirstMesures de sécurité AVERTISSEMENT<Pour modèles avec batterie relais intégrée uniquement>Une production de chaleur est possible, la batterie relais intégrée risque également de prendre feu ou de casser. Ne pas jeter ce produit au feu et ni le soumettre à une chaleur excessive Ne pas insérer d’objets pointus dans ce produit, ni le démonter ou le modifier Ne pas soumettre le pro-duit aux secousses ni aux chocs, ne pas le soumettre à une pression excessive, etc. Ne pas charger la batte-rie en appliquant des mé-thodes autres que celles indiquées Éviter les chaleurs ex-trêmes (proximité d’un feu, lumière directe du soleil, par exemple) Lorsque la batterie est détériorée, contacter votre service de support tech-nique afin de la remplace AVERTISSEMENTUn incendie ou un choc électrique risque de se produire. Ne rien tenter qui puisse en-dommager le cordon secteur, la fiche CA ou l’adaptateur secteur Ne pas endommager ou modi-fier le cordon, ni le placer à proximité d’objets chauds, le tordre, le plier, ou le tirer avec force, ni placer d’objets lourds sur ce dernier, ni le serrer de manière excessive.Ö Ne pas continuer à utiliser un cordon secteur CA, une che CA ou un adaptateur secteur endommagé.y Contacter votre assistance technique pour réparation. Ne pas brancher l’adapta-teur secteur à une source d’alimentation autre qu’une prise secteur domestique standardÖ L’adaptateur secteur risque d’être endommagé s’il est con-necté à un convertis-seur C.C./C.A. (inverseur). En avion, ne brancher l’adaptateur secteur/chargeur que sur une prise secteur spéciquement adaptée à un tel usage. Ne pas insérer ni retirer la fiche C.A. les mains mouil-lées Ne pas démonter ce produit Ne pas toucher ce pro-duit en cas d’orage s’il est branché au câble d’alimen-tation ou à n’importe quel autre câble
13Read Me First AVERTISSEMENT Si un dysfonctionnement ou un problème se produit, cesser immédiatement l’utilisation Si le dysfonctionnement suivant se produit, dé-brancher immédiatement la fiche CA et la batteriey Ce produit est endommagéy Présence de corps étran-gers dans ce produity Émission de fuméey Émission d’une odeur inhabituelley Dégagement de chaleur inhabituelleÖ Après la procédure ci-des-sus, contacter l’assistance technique pour réparation. Éliminer régulièrement la poussière et d’autres rési-dus de la fiche C.A.y Si de la poussière ou d’autres résidus s’accumulent sur la che, de l’humidité etc. ris-quent de causer une défail-lance de l’isolation. Insérer complètement la fiche C.A.Ö Ne pas utiliser de che endo-magée ni de prise CA lâche. Refermer soigneusement le cache de connexion lors de l’utilisation de ce produit en présence d’eau, d’humidité, de vapeur, de poussière, de vapeurs graisseuses, etc.Ö Si un corps étranger a péné-tré dans ce produit, mettre im-médiatement celui-ci hors ten-sion et déconnecter la che secteur puis retirer le bloc de batterie. Contacter ensuite l’assistance technique. AVERTISSEMENTDes brûlures ou des brûlures à basse température. risquent de se produire. N’utilisez pas ce produit en contact direct avec votre corps pendant une période prolongéeÖ N’utilisez pas ce produit avec ses parties émettant de la chaleur en contact direct avec votre corps pendant une période pro-longée.y Cela peut entraîner des brûlures à basse tempéra-ture. Ne pas toucher de façon continue la surface de l’adaptateur secteur lors de l’utilisation/le recharge-menty Ceci risque de causer des brûlures.Ceci risque d’entraîner des effets de santé néfastes sur votre corps. Ne pas monter le volume trop fort lors de l’utilisation du casquey L’écoute à des niveaux so-nores élevés qui stimulent l’oreille de manière exces-sive pendant une période prolongée peut se traduire par une perte d’audition.
14Read Me FirstMesures de sécurité ATTENTIONUn incendie ou un choc électrique risque de se produire. Ne pas déplacer ce produit tant que la fiche C.A. est connectéeÖ Si c’est le cas, déconnec-ter immédiatement la che C.A. Ne soumettre l’adapta-teur secteur à aucun choc violentÖ Ne pas continuer à utiliser l’adaptateur secteur après un choc violent, après une chute par exemple.Ö Contacter votre assistance technique pour réparation. Ne pas laisser ce produit dans un endroit à tempé-rature élevée pendant une période prolongéey Laisser ce produit dans un endroit où il sera exposé à des températures extrêmement élevées, comme près du feu ou à la lumière directe du soleil, risque de déformer le boîtier et/ou d’endommager les éléments internes. Tenir fermement la fiche C.A. lors de son retrait N’utiliser que l’adaptateur secteur spécifié pour ce produitÖ Ne pas utiliser un adap-tateur secteur autre que celui fourni (fourni avec le produit ou acheté sépa-rément en tant qu’acces-soire).Ce produit risque de basculer ou de tomber et d’entraîner des bles-sures. Ne pas placer ce produit sur des surfaces instables Éviter tout empilage
15Read Me First ATTENTIONCeci risque d’entraîner des effets de santé néfastes sur votre corps. Faire une pause de 10 à 15 minutes par heurey Utiliser ce produit pendant une période prolongée peut être néfaste pour les yeux ou les mains.Des brûlures, des brûlures à basse température, ou des gelures pour-raient être causées. Ne pas toucher ce produit lors de son utilisation dans un milieu chaud ou froidÖ Lorsqu’il est nécessaire d’exposer la peau à ce produit comme pour scan-ner une empreinte digitale, veuillez effectuer l’opé-ration le plus rapidement possible.AVISl Ne pas placer l’ordinateur près d’une télévision ou d’un récepteur radio.l Tenir l’ordinateur à l’écart des ai-mants. Les données stockées sur la mémoire ashpourraient être per-dues.l Cet ordinateur n’est pas prévu pour l’afchage d’images à des ns de diagnostic médical.l Cet ordinateur n’est pas prévu pour une connexion à un équipement médical à des ns de diagnosticmédical.l Panasonic ne pourra être tenu res-ponsable de perte de données ou de tout autre dommage accessoire ou indirect résultant de l’utilisation de ce produit.l Ne pas toucher les bornes de la batterie. La batterie risque de ne plus fonctionner correctement si les bornes sont sales ou endomma-gées.l Ne pas exposer la batterie à l’eau et éviter qu’elle soit mouillée.l Si vous n’utilisez pas la batterie pendant une période prolongée (un mois ou plus), la charger ou la décharger (l’utiliser) jusqu’à ce que son niveau de charge se situe entre 30 % et 40 % de sa capacité maxi-male, puis la ranger dans un endroit frais et sec.l Cet ordinateur protège la batterie contre une éventuelle surcharge en ne déclenchant son rechargement que lorsque sa charge est inféri-eure à 95 % environ de sa capacité maximale.
16Read Me FirstMesures de sécuritél À l’achat de l’ordinateur, la batterie n’est pas chargée. La charger avant d’utiliser votre ordinateur pour la première fois. Lorsque l’adaptateur secteur est branché sur l’ordinateur, la charge démarre automatique-ment.l En cas de contact du liquide de la bat-terie avec les yeux, ne pas les frotter. Les rincer immédiatement avec de l’eau et consulter un médecin. REMARQUE l La batterie peut chauffer pendant la charge ou l’utilisation normale. Il s’agit d’un phénomène tout à fait normal.l La charge ne peut commencer si la température interne de la bat-terie excède la plage de tempéra-tures acceptable (0 °C à 50 °C). ( Reference Manual “Battery Power”) La charge commence automatiquement lorsque la tem-pérature revient dans les limites autorisées. Noter que le temps de charge varie en fonc-tion des con-ditions d’utilisation. (Le temps de charge est plus long que d’habitude lorsque la température est inférieure ou égale à 10 °C)l Lorsque la température est basse, l’autonomie est diminuée. N’utiliser l’ordinateur que dans la plage de températures autorisée.l Cet ordinateur est doté d’une fonc-tion haute température qui empêche la dégradation de la batterie dans des conditions de hautes tempéra-tures. ( Reference Manual “Battery Power”) Un niveau correspondant à une charge de 100 % à de fortes tem-pératures est équivalent à une charge d’environ 80 % à des tem-pératures normales.l La batterie est un produit consom-mable. Si le temps d’utilisation de la batterie est considérablement réduit et si ses performances ne s’améliorent pas lorsqu’elle est rechargée à plusieurs reprises, la remplacer par une nouvelle batterie.l Lors du transport d’une batterie de rechange dans un bagage, une va-lise, etc., nous recommandons de la placer dans un sac en plastique an d’en protéger les bornes.l Toujours mettre l’ordinateur hors tension s’il n’est pas utilisé. Si l’ordinateur est laissé sous tension alors que l’adaptateur secteur n’est pas branché, la batterie risque de se décharger complètement.l <Pour modèles avec batterie relais intégrée uniquement> An de réduire la détérioration de la batterie relais intégrée, brancher l’ordinateur sur l’adaptateur secteur et le recharger durant approxima-tivement 2 heures environ une fois par an.
17Read Me FirstCE PRODUIT N’EST PAS DESTINÉ À ÊTRE UTILISÉ, EN TOUT OU EN PARTIE, COMME SYSTÈMES/ÉQUIPEMENTS NUCLÉAIRES, SYSTÈMES/ ÉQUIPEMENTS DE CONTRÔLE DU TRAFIC AÉRIEN OU SYSTÈMES/ÉQUIPEMENTS DE COCKPIT D’AVION*1, DISPOSITIFS OU ACCESSOIRES MÉDICAUX*2, SYSTÈMES D’ASSISTANCE DE VIE ARTIFICIELLE OU TOUT AU-TRE ÉQUIPEMENT/DISPOSITIF/SYSTÈME LIÉ À LA VIE OU LA SÉ-CURITÉ HUMAINE. PANASONIC N’ACCEPTERA AUCUNE RESPON-SABILITE POUR TOUT INCIDENT RESULTANT DE L’USAGE DE CE PRODUIT POUR L’UNE DES FONC-TIONS ENONCEES CI-DESSUS.*1 LES SYSTÈMES/ÉQUIPEMENTS DE COCKPIT D’AVION sont dotés de sys-tèmes EFB (Electrical Flight Bag) de classe 2 et de classe 1 utilisés pendant des phases critiques de vol (par exemple, pendant le décollage et l’atterrissage) et/ou montés sur l’avion. Les systèmes EFB de classe 1 et de classe 2 sont dénis par la FAA : AC (Advisory Circular) 120-76 A ou la JAA : JAA TGL (Temporary Guid-ance Lea-ets) n° 36. *2 Comme prescrit par la directive euro-péenne concernant les dispositifs médi-caux (MDD) 93/42/EEC.Panasonic ne donne aucune garantie en ce qui concerne les spécications, les technologies, la abilité et lasé-curité (par exemple, l’inammabilité, la fumée, la toxicité, l’émission de fréquences radio, etc.) relatives aux normes de l’aviation qui ont dépas-sent les spécications de nos produits COTS (disponibles sur le marché).Cet ordinateur n’est pas conçu pour être utilisé dans les équipements médicaux, y compris les systèmes de support de vie, les systèmes de contrôle de trac aérien ou d’autres équipements, dispositifs ou systèmes impliqués pour assurer la vie humaine ou la sécurité. Panasonic ne peut être tenu responsable en aucune façon pour tout dommage ou perte résultant de l’utilisation de cet appareil dans ces types d’équipement, de dispositifs ou de systèmes, etc. Cet ordinateur a été conçu de manière à minimiser les chocs sur l’écran LCD et le lecteur de mémoire ash, etc, sans fournir de garantie contre de tels problèmes. Par conséquent, comme pour tout instrument de précision, être extrêmement prudent dans la manipulation.
18Read Me First<Only for model with wireless LAN/Bluetooth/wireless WAN>This product and your HealthThis product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emit-ted by wireless devices like for exam-ple mobile phones.Because this product operates within the guidelines found in radio frequency safety standards and recommenda-tions, we believe this product is safe for use by consumers. These standards and recommendations reect the con-sensus of the scientic community and result from deliberations of panels and committees of scientists who continu-ally review and interpret the extensive research literature.In some situations or environments, the use of this product may be restricted by the proprietor of the building or respon-sible representatives of the organiza-tion. These situations may for example include:l Using this product on board of air-planes, orl In any other environment where the risk of interference to other devices or services is perceived or identied as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specic organization or environ-ment (e.g. airports), you are encour-aged to ask for authorization to use this product prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interference caused by un-authorized modication of this product. The correction of interference caused by such unauthorized modication will be the responsibility of the user. We and its authorized resellers or distribu-tors are not liable for damage or viola-tion of government regulations that may arise from failing to comply with these guidelines. 26-M-1<Uniquement pour les modèles avec réseau local sans l et/ou Bluetooth>Ce produit et votre santéCe produit, comme tout autre appareil radio, émet de l’énergie radioélectrique. Toutefois, la quantité d’énergie émise par ce produit est beaucoup moins im-portante que l’énergie radioélectrique émise par des appareils sans l tels que les téléphones portables. L’utilisa-tion de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des directives concernant les normes et les recommendations de sécurité sur les fréquences radio. Ces normes et recommandations reètent le consen-sus de la communauté scientique et résultent de délibérations de jurys et comités de scientiques qui examinent et interprètent continuellement les nou-veautés de la vaste littérature sur les recherches effectuées. Dans certaines situations ou environnements, l’utilisa-tion de ce produit peut être restreinte par le propriétaire du bâtiment ou par les représentants responsables de l’organisation. Ces situations peuvent être les suivantes par exemple :l A bord d’un avion, oul Dans tout autre environnement où les risques d’interférence sur d’autres appareils ou services sont perçus ou identiables comme dan-gereux.Si vous n’êtes pas sûr de la réglemen-tation applicable à l’utilisation d’appa-reils sans l dans une organization Information to the User / Informations destinées aux utilisateursRegulatory Information
19Read Me Firstou un environnement spécique, (par exemple dans un aéroport) nous vous invitons à demander l’autorisation d’utiliser ce produit avant sa mise en marche.Informations concernant la régle-mentationNous déclinons toute responsabilité pour toute interférence radio ou télévi-sion causée par des modications non autorisées apportées à ce produit. La correction d’interférences causées par de telles modications non autorisées sera la seule responsabilité de son uti-lisateur. Nousmêmes, les revendeurs ofciels et les distributeurs ne sommes pas responsable de tout dégât ou de toute violation des règlements de l’État pouvant découler du non-respect de ces directives. 26-F-1Lithium Battery / Pile au lithiumLithium Battery!This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service per-sonnel.Warning!A risk of explosion from incorrect instal-lation or misapplication may possibly occur. 15-E-1Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être rempla-cée que par un technicien qualié.Danger ! Risque d’explosion en cas de non res-pect de cette mise en garde! 15-F-1Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols are only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of dis-posal. 53-M-1
20Read Me FirstRegulatory Information<Only for model with wireless WAN>The following safety precautions must be observed during all phases of the opera-tion, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating person-nel and to incorporate these guidelines into all manuals supplied with the prod-uct. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guide-lines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating wire-less WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow in-struction provided by the airline. Do not operate Personal Computer or Handheld Computer incorporat-ing wireless WAN modem in the presence of ammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel de-pots, chemical plants or where blasting operations are in progress. Opera-tion of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.Safety Precautions
21Read Me First Your Personal Computer or Handheld Computer incorporating wire-less WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Hand-held Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger. Road safety comes rst! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommend-ed to stow the unit in the boot or secure stowage area while driving. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. IMPORTANT! Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guar-anteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls.Remember, in order to make or receive calls, Personal Computer or Hand-held Computer incorporating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength.Some networks do not allow for emergency calls if certain network ser-vices or phone features are in use (e.g. lock functions, xed dialing etc.). You may need to deactivate those features before you can make an emer-gency call.Some networks require that a valid SIM card be properly inserted in Per-sonal Computer or Handheld Computer incorporating wireless WAN mo-dem.CAUTION:Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.58-E-1ATTENTION:Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.Mettre au rebut les batteries usagées conformément aux instructions.58-F-1
22Read Me FirstRegulatory InformationCamera Light<Only for model with Rear Camera>CAUTION- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes. 57-E-1Laser Devices<Only for model with Barcode Reader>This equipment is using lasers that comply with US21CFR1040.10, 1040.11, EN 60825-1:2007 and IEC60825-1:2007 regulations.The laser is a “Class 2” laser which is indicated on the label for this product.”Class 2 laser readers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.Caution-Procedures other than those specied herein may result in hazardous radiation exposure.630 - 680 nm, 1 mW MAX. Labeling/Marking 13-E-1
23Read Me FirstFor U.S.A.Federal Communications Commis-sion Radio Frequency Interference StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radi-ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-lar installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:l Reorient or relocate the receiving antenna.l Increase the separation between the equipment and receiver.l Connect the equipment into an out-let on a circuit different from that to which the receiver is connected.l Consult the Panasonic Service Center or an experienced radio/TV technician for help.WarningTo assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modications not expressly approved by the party re-sponsible for compliance could void the user’s authority to operate this equip-ment.FCC RF Exposure Warning:<Only for model with wireless LAN/wireless WAN/Bluetooth>l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.l This equipment has been approved for portable operation, and does not require any minimum spacing be provided between antennas and all person’s body.l This equipment may not be co-located or operated with any other antenna or transmitter. 25-M-4<Only for model with wireless LAN>This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or dam-age this product. 25-M-W-4
24Read Me FirstRegulatory InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Responsible Party: Panasonic Corporation of North AmericaTwo Riverfront PlazaNewark, NJ 07102Support Contact: http://www.panasonic.com/contactinfo 6-M-1<For USA-California Only>This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorate/38-M-1USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149 65-M-2<For USA and Canada>A lithium ion battery that is recyclable powers the product you have purchased.Please call 1-800-8-BATTERY for information on how to recycle this battery.L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion.Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.48-M-1
25Read Me FirstFor Canada / Pour le CanadaCanadian ICES-003CAN ICES-003(B) / NMB-003(B) 7-M-3<Only for model with wireless LAN/Bluetooth>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interfer-ence, and(2) this device must accept any inter-ference, including interference that may cause undesired operation of the device.<Ne s’applique qu’aux modèles avec technologie Bluetooth/LAN sans l>Industrie CanadaCet équipement est conforme à la norme CNR-210 d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes :(1) ce dispositif ne peut produire de brouillage, et(2) ce dispositif doit accepter le brouil-lage, y compris le brouillage pou-vant entraîner le fonctionnement non désiré de l’appareil. 30-Ca-1-1<Only for model with wireless LAN>This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satel-lite systems.High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices.<Ne s’applique qu’aux modèles avec technologie LAN sans l>Cet appareil (pour réseaux locaux radioélectriques) dans les bandes de fréquences 5150-5250 MHz est réser-vé à une utilization à l’intérieur an de réduire le risque d’interférence avec les systèmes satellites mobiles bicanaux.Les radars forte puissance sont dési-gnés comme étant les premiers utili-sateurs (c’est-à-dire qu’ils ont la prio-rité) des bandes de fréquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interférences et/ou des dommages à ce périphérique. 30-Ca-2-1FOR USE WITH MODEL NO. : CF-AA6373APOUR UTILISER AVEC MODÈLE : CF-AA6373A 20-Ca-1
26Getting StartedIntroductionThank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.In these instructions, the names are referred as follows. Terms and illustrations in these instructionsCAUTION : Conditions that may result in minor or moderate injury.NOTE : Useful and helpful information. : Page in these Operating Instructions or in the Reference Manual. : Reference to the on-screen manuals.Display “Charm”: Align the cursor to the top right (or bottom right) corner of the screen to display Charm menu. Alternatively: Flick toward the center of the screen from the right edge. - : Touch (Settings) and then touch (Power).<Only if the external keyboard is connected>F12 : Press [F12] key.l Some illustrations are simplied to help your understanding and may look differently from the actual unit.l If you do not log on as an administrator, you cannot use some functions or cannot display some screens.l Refer for the latest information about optional products to the catalogs, etc.l In these instructions, the names and terms are referred as follows.y “Windows® 8.1 Pro 64-bit” and “Windows® 8.1 with Bing 64-bit” as “Windows” or “Windows 8.1”l Screen messages are explained in [English (United States)].(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language prefer-ence.) Disclaimer Computer specications and manuals are subject to change without notice. Pana-sonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
27Getting Started TrademarksMicrosoft®, Windows®, and the Windows logo are registered trademarks of Micro-soft Corporation of the United States and/or other countries.Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.microSDXC Logo is a trademark of SD-3C, LLC. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.Names of products, brands, etc., appearing in this manual are trademarks or reg-istered trademarks of their respective own companies. On-screen ManualFor further information about the computer, you can refer to the on-screen manual.l Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.l Important Battery Tips The Important Battery Tips will provide you with the battery information so that you can use the battery in the optimum condition to obtain longer operation time.To access the on-screen manuals, follow the steps below.On the Start screen, touch the [Manual Selector] tile, and select the on-screen manual. NOTE l [Contents] tab or [Search] tab is displayed on the left side of the window. Select tab and display the desired item.
28Getting StartedDescription of Parts89%ACGBDFEHBFront sideA: Wireless LAN Antenna Reference Manual “Wireless LAN”B: Wireless WAN Antenna <Only for model with wireless WAN> Reference Manual “Wireless WAN”C: LED Indicators : Power Indicator Off: Power off/Hibernation, Green: Power on, Blinking green: Sleep. : Drive status : Battery status page 46 “When the battery indicator does not light on” Reference Manual “Bat-tery Power”<Only for model with Front Camera>Front Camera Reference Manual “Camera” D: Ambient Light Sensor The ambient light sensor is equipped with an automatic brightness adjustment function that adjusts the display screen. ( page 47) E: Camera Lens F: Camera IndicatorG: Contactless IC Card Reader You can read the data from NFC (Near Field Communication) de-vices (Contactless Card, etc.). ( page 42)H: Wireless LAN Antenna / Blue-tooth Antenna Reference Manual “Wireless LAN” “Bluetooth”
29Getting StartedA: A1 / A2 Button Reference Manual “Tablet Buttons”B: Windows Button Reference Manual “Tablet Buttons”C: Number Key Press to input numbers.D: Function Key Press to execute the function as-signed in the application software.E: CANCEL Key Press to cancel transaction.F: CLEAR Key Press if you input a wrong value. Pressing the key will clear the input value.G: ENTER Key Press to conrm the input data.H: LED Indicator Off: In hibernation or when input-ting numbers is possible. Green: In secure state where input-ting password is possible. Red: Detecting a security problem.ABDEC G F HKey Pad
30Getting StartedDescription of PartsDEFGHILeft side35%から115%に拡大LMRight sideA BTopCTop (optional)J KBottomA: Magnetic Stripe Card Reader Reads information of a credit card (magnetic stripe card). ( page 43)B: MicrophoneC: Barcode Reader <Only for model with Barcode Reader> Reference Manual “Barcode Reader”D: Headset Jack A headset or headphone can be connected.E: USB3.0 Port Reference Manual “USB Devices”F: Rotation Lock Button Reference Manual “Display Rotation”G: Power SwitchH: Volume Button Reference Manual “Tablet Buttons”I: DC-IN JackJ: SpeakerK: Smart Card Reader Reads information of a credit card (Smart card). ( page 44)L: Security Lock A Kensington cable can be con-nected. For further information, read the manual that comes with the cable.M: Expansion Bus Connector Reference Manual “Cradle”
31Getting StartedRear side<Only for model with Rear Camera>Rear Camera Reference Manual “Camera” A: Camera Lens B: Camera Light C: Camera IndicatorD: A3 Button Reference Manual “Tablet Buttons” <Only for model with Barcode Reader> Trigger Button Reference Manual “Barcode Reader”E: Battery PackF: Battery Indicator <Only for model with Built-in Bridge Battery>G: Battery Latch Reference Manual “Battery Power” H: microSIM Card Slot <Only for model with wireless WAN> Reference Manual “Wireless WAN” I: microSD Memory Card Slot Reference Manual “microSD Memory Card Slot” J: SAM Card Slot Reference Manual “SAM Card Slot”G FAJEDCBHI
32Getting Started Preparation Check and identify the supplied accessories. If you do not nd the described accessories, contact Panasonic Technical Support ( page 75).• AC Adaptor .....1Model No: CF-AA6373A• AC Cord .......1• Battery Pack ...1Model No: FZ-VZSU94W• Stylus .........1• Tether .........1• Hand Strap .....1• Screw for Hand Strap ..........2• Hexagon wrench ..............1• Soft Cloth .............................................1• OPERATING INSTRUCTIONS (This book) ................... 1 Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging ( page 65).First-time Operation1 Inserting the Battery Pack.Turn over the computer and insert the battery pack until it touch to the secured position.l Make sure no foreign objects are under the computer. CAUTION l Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer.l Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer.12
33Getting Started NOTE l Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:Status FZ-VZSU94W FZ-VZSU95W (optional)When power is off Approx. 8 weeks Approx. 18 weeksIn sleep*1 Approx. 5 days Approx. 11 daysIn hibernation Approx. 8 weeks Approx. 18 week*1 <Only for model with LAN> If “Wake Up from wired LAN” is enabled, the period of time will be shorter.2 Connect your computer to a power outlet.The battery charging starts automatically. CAUTION l Do not disconnect the AC adaptor until the rst-time operation procedure is completed.l When using the computer for the rst time, do not connect any peripheral device (in-cluding wired LAN cable) except the battery pack and AC adaptor.l Handling the AC adaptory Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended un-less running from the battery pack alone.213 Turn on the computer.Press the power switch ( page 30) until the power indicator ( page 28) lights. ( page 39) CAUTION l Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer.l Any changes from the default setting of the Setup Utility must not be made until the First-time Operation is completed.
34Getting StartedFirst-time Operation4 Setup Windows.Follow the on-screen instructions.l The computer restarts several times. Do not touch the screen or tablet but-tons, and wait until the drive indicator has turned off.l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears.l Setup of Windows will take approximately 5 minutes.Go to the next step, conrming each message on the display.l You can set the Wireless Network after the setup of Windows is complete.If “Get online” is displayed, you can select “Skip this step”. CAUTION l You can change the user name, password, image and security setting after setup of Windows.l Remember your password. If you forget the password, you cannot use Windows. Creating a password reset disk beforehand is recommended.l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name) that includes the “@” mark, a pass-word will be requested at the log-on screen, even if no password has been set. If you try to log on without entering a password, “The user name or password is incorrect.” may be displayed and you will not be able to sign in to Windows ( page 61).5 Create the recovery disc.A recovery disc allows you to install OS and restore its factory default condi-tion, in case, for example, the recovery partition of the ash memory is dam-aged. We recommend creating a recovery disc before you begin using the computer. Refer to  Reference Manual “Recovery Disc Creation Utility” about cre-ating the disc.
35Getting Started NOTE l PC Information Viewer This computer periodically records the management information of the ash memory, etc. The maximum data volume for each record is 1024 bytes. This information is only used for estimating the cause when the ash memory goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK]. Then follow the on-screen instruc-tions. ( Reference Manual “Checking the Computer’s Usage Status”) Before using wireless function Display “Charm”, and touch - [Change PC Settings] - [Network] - [Airplane mode]. Set [Airplane mode] to [Off], and then; set [Wi-Fi] to [On] (for wireless LAN). set [Mobile broadband] to [On] (for wireless WAN). set [GPS] to [On] (for wireless WAN). set [Bluetooth] to [On] (for Bluetooth). To change the partition structureYou can shrink a part of an existing partition to create unallocated disk space, from which you can create a new partition. In the default setting, you can use a single partition. Perform the following procedure. 1. Touch on the Start screen, and then long touch [This PC] under “Win-dows System”. 2. Touch [Manage] on app bar. Touch [Disk Management]. Long touch the partition for Windows (“c” drive in the default setting), and touch [Shrink Volume].l The partition size depends on the computer specications. Input the size in [Enter the amount of space to shrink in MB] and touch [Shrink].l You cannot input a larger number than the displayed size.l To select [Reinstall to the OS related partitions.] in installing OS ( page 55), 70 GB or more is necessary for [Total size after shrink in MB]. Long touch [Unallocated] (the shrunk space in the step ) and touch [New Simple Volume].
36Getting StartedFirst-time Operation Follow the on-screen instructions to make the settings, and touch [Finish].Wait until formatting is completed. NOTE l You can create an additional partition using remaining unallocated space or newly creating unallocated space.l To delete a partition, long touch the partition and touch [Delete Volume] in the step .Installing the hand strapAttaching the hand strap helps you stably hold the computer. CAUTION l Place the computer on a soft cloth with the panel side down. In addition, make sure that there is no item under the computer. Open the pad of the hand strap and adjust the length with velcro straps. Put the hand strap so that the curved side comes near the wrist and x it with the screws (supplied) and hexagon wrench (supplied) in the diagonal positions.<Holding with left hand> <Holding with right hand>
37Getting Started Using the hand strap When using the computer holding with hand, insert your hand to the hand strap. Fix the hand strap rmly so that the computer does not come off, and then turn it over. CAUTION l If the hand is not securely xed to the hand strap, the computer may drop. Attaching the tether to the hand strap Pass one of the loops through the hole. Pass one of the loops through another loop. Pass the loop through the ring of the hand strap. Pass the stylus and tether through the second loop.
38Getting StartedFirst-time Operation NOTE l The stylus can be stored in the hand strap as below.
39Basic OperationTurning OnPress the power switch ( page 30) until the power indicator ( page 28) lights. NOTE l Do not press the power switch repeatedly.l The computer will forcibly be turned off if you press the power switch for four seconds or longer.l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.l Do not perform the following operation until the drive indicator turns off.y Connecting or disconnecting the AC adaptory Pressing the power switchy Touching tablet buttons, screen or external mouseTurning Off Shut down the computer.1. Display “Charm”, and touch .2. Touch [Power] - [Shut down]. NOTE l To turn off the computer completely, proceed as follows. Display “Charm”, and touch - [Change PC settings] - [Update and recov-ery] - [Recovery]. Touch [Restart now] under “Advanced startup”. Touch [Turn off your PC].Turning On / Turning Off
40Basic OperationTurning On / Turning OffPrecaution against Starting Up / Shutting Downl Do not do the followingy Connecting or disconnecting the AC adaptory Pressing the power switchy Touching tablet buttons, screen or external mouse NOTE l To conserve power, the following power saving methods are set at the time of purchase.y The screen automatically turns off after :10 minutes (when AC adaptor is connected) of inactivity5 minutes (when operating on battery power) of inactivityy The computer automatically enters sleep*1 after :20 minutes (when AC adaptor is connected) of inactivity15 minutes (when operating on battery power) of inactivity*1 Refer to Reference Manual “Sleep or Hibernation Functions” about re-suming from sleep.
41Basic Operationl Be extremely careful not to lose the product. Always lock the storage area and, if you take it outside, always keep it with you to prevent theft or unauthorized use by a third person.l Before using the product, check the terminal for any trace of disassembly or modication. Do not use it if any abnormality is observed.l Do not open the housing of the product and do not modify the product.l The product uses a battery to perform backup of important operational data. Do not remove the battery because doing so will delete the backup data, which may disable operation of the product. Charge the battery pack at least once per six months if the product is not used for a long time. How to input a password (Give this information to customers)l If a password is required for transaction, ask the customer to input it. Inputting a password is possible when the LED on the side of the touch panel is lighting green. Be sure to check the LED before asking a customer to input. LED Indicator Off: In hibernation or when inputting numbers is pos-sible. Green: In secure state where inputting password is pos-sible. Red: Detecting a security problem.l To prevent unauthorized use by a third person, observe the following instruc-tions to keep the password secret.y The customer him/herself must input the password.y The customer should hold the product by hand when inputting the password.y The customer should use his/her hand or other body part to hide the pass-word from people nearby.y The customer should use his/her hand or other body part to hide the pass-word from a security camera. Signature verication <for credit cards>l Some applications may require a printed slip and signature on it.l If the signature eld is blank in the sales slip for the credit card company, al-ways ask the customer to sign his/her signature in it and verify it with the sig-nature on the back of the credit card. (This is not necessary if “a signature is not necessary” is printed in the eld.)Payment Function
42Basic OperationPayment FunctionReading the Contactless IC CardPut your contactless IC card or mobile phone just above the logo mark shown on the display (touch panel). l The color and sound indicating the reading status of the contactless IC card differ depending on the applications. The NFC logo appears around here on the displayPut your contactless IC card or mobile phone over the display until processing is completed. CAUTION l To prevent a misoperation when reading the card, do not touch the display.l Be careful not to hit the display (touch panel) with your mobile phone.
43Basic OperationReading the Magnetic Stripe CardHold the middle of the magnetic stripe card and slide it through the magnetic stripe card reader.Slide the card keeping its embossed side facing you. CAUTION l To prevent a misoperation when reading the card, do not touch the display.l To prevent a reading error, do not hold the end of the card.NG NG
44Basic OperationPayment FunctionReading the Smart CardTo insert a smart card Insert your smart card in the Smart Card Reader.l Keep the contact part of the smart card facing up and insert it until it reaches the end. The card reaches the end when around half of it is inserted.The contact part of the smart cardTo remove a smart card Pull out the smart card to the arrow direction. CAUTION l Do not insert a wet smart card.l Do not insert any other object than a smart card.l Wipe dirt off the contact part of the smart card before use.l To prevent a misoperation when reading the card, do not touch the display.l Do not remove the card until processing is completed.
45Useful InformationHandling and MaintenanceOperation environmentl Place the computer on a at stable surface not subject to shock, vibration, and danger of dropping. Do not place the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become damaged.l Operating environment Temperature: Operation : -10 °C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*1 Storage : -20 °C to 60 °C {-4 °F to 140 °F} Humidity: Operation : 30% to 80% RH (No condensation) Storage : 30% to 90% RH (No condensation)Even within the above temperature/humidity ranges, operation for a long time in extreme environments, smoking nearby, or operation in places where oil is used or where there is a lot of dust will result in the product deterioration and will shorten the product life.*1 Do not expose the skin to this product when using the product in a hot or cold environment. ( page 7) If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage may occur. Make sure to dry off the computer in such temperatures.l Do not place the computer in the following areas, otherwise the computer may be damaged.y Near electronic equipment. Image distortion or noise may occur.y In extremely high or low temperature.l As the computer can become hot during operation, keep it away from items that are sensitive to heat.Handling cautionsThis computer is designed to minimize shock to parts such as the LCD and the ash memory drive, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling the computer.l When carrying the computer:y Turn off the computer.y Remove all external devices, cables, Smart Cards and other protruding ob-jects.y Do not drop or hit the computer against solid objects.y Do not grip the display part.l When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the air-line’s instructions.l When carrying a spare battery, put it in a plastic bag to protect its terminals.
46Useful InformationHandling and Maintenancel The touchscreen is designed to be used by a nger tip. Do not place any ob-jects on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).l Avoid any harmful substances such as oil from getting into the touchscreen. The pointer may not work correctly.l Be careful not to get injured by dropping or getting hit when carrying the com-puter.l Use only the stylus to touch the screen. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).l Do not use the screen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/stylus can scratch the screen surface or ob-struct the stylus operation.l Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in scratches on the screen. When the battery indicator does not light on The battery indicator may not light on even if the AC adaptor and the battery pack are correctly connected to the computer, due to the following reasons.l The AC adaptor’s protection function may be working. In this case, pull out the AC cord and wait for more than 1 minute before reconnecting the AC cord. When using peripheral devicesFollow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.l Use the peripheral devices conforming to the computer’s specications.l Connect to the connectors in the correct direction.l If it is hard to insert, do not try forcibly but check the connector’s shape, direc-tion, alignment of pins, etc.l If screws are included, fasten them securely.l Remove the cables when you carry the computer. Do not pull the cables forc-ibly.
47Useful Information Preventing your computer from unauthorized use via wireless LAN/Blue-tooth/Wireless WAN<Only for model with wireless LAN/Bluetooth/Wireless WAN>l Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryption. Battery Recalibrationl The battery recalibration may take a long time due to the large battery capac-ity. This is not a malfunction.<When performing “Battery Recalibration” after shutting down Windows>y Full charge: Approximately 2.5 hours (with FZ-VZSU94W) / Approximately 4.5 hours (with FZ-VZSU95W (optional))y Complete discharge: Approximately 3.5 hours (with FZ-VZSU94W) / Approxi-mately 7.5 hours (with FZ-VZSU95W (optional))When performing “Battery Recalibration” without shutting down Windows, it may take more time to charge / discharge. SensorsThis computer is equipped with four sensors (acceleration sensor, gyro sensor, magnetic sensor, ambient light sensor), and you can use these sensors with any software that is compatible.As the accuracy of each sensor output is dependent on the operating environment and other conditions, the results should only be used as a reference.The acceleration sensor, gyro sensor, and magnetic sensor are located at the bot-tom right of the LCD. The detection results of each sensor may vary depending on the display mode, how you are holding the computer, the application software you are using, and other factors.
48Useful InformationHandling and Maintenancel Automatic brightness adjustment The computer is equipped with an automatic brightness adjustment function that adjusts the display screen based on the ambient light sensor. You can congure the automatic adjustment function as follows. Display “Charm”, and touch - [Change PC Settings] - [PC and devices] - [Power and sleep], then set [Adjust my screen brightness automatically] to [On]. The ambient light sensor is located at the top of LCD. The ambient light cannot be detected properly if this area is obstructed or dirty.l Magnetic sensor The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the magnetic sensor may not function properly and it readings may be inaccurate, especially in the following environments.y Inside or near steel structures such as buildings or bridgesy Inside or near automobiles, or near train power linesy Near metallic furniture or appliancesy When the AC adaptor or other peripheral devices are brought closer to the computery Near magnets, speakers, or other objects with strong magnetic elds The magnetic directions indicated by the magnetic sensor may not be accurate immediately after purchase or in environments with poor magnetic elds. In such cases, turn on the computer and move it as follows. Hold the computer so that its display side is facing the ground and level. While keeping the computer level, rotate it 90 degrees or more clockwise. Return the computer to position , and rotate it 90 degrees or more coun-terclockwise. Return the computer to position . Tilt the computer 90 degrees or more to the left so that the left side of the computer tilts down. Return the computer to position , and tilt it 90 degrees or more to the right so that the right side of the computer tilts down. CAUTION l Hold the computer rmly when moving it. Strong shocks from dropping the computer may result in damage.l Tether for Stylus When using the stylus with tether, do not pull the tether with excessive force. The stylus may hit the computer, person’s body or other objects when re-leased.
49Useful InformationMaintenanceIf drops of water or other stains get on the surface of the LCD panel, wipe them off immediately. Failure to do so may result in staining.To clean the LCD panelUse the soft cloth. (For further information, refer to “Suggestions About Cleaning the LCD Surface”  Reference Manual “Screen Input Operation”.)To clean areas other than the LCD panelWipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly. CAUTION l Do not use benzene, thinner, or rubbing alcohol since it may adversely af-fect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.l Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage.
50Useful InformationHandling and MaintenanceDispose of Computer<Only for model with Built-in Bridge Battery><For Europe and U.S.A./Canada>Attention Customers Don't remove the battery by yourself. The battery must be removed by quali-ed professionals. When disposing of this product, be sure to contact qualied professionals to remove the battery. Attention Qualied professionals to remove the battery Dispose of this product correctly in accordance with the local regulations after removing the battery as shown in the following procedure.  Preparationl Remove all peripherals (microSD memory card, etc.).l Erase the stored data. ( Reference Manual “Erasing Flash Memory Data”) CAUTION l Never disassemble the computer except before disposal.l Refer to page 3 for precautions when disposing of the computer. 1. Turn off the computer, and disconnect the AC adaptor.2. Turn over the computer, remove the battery pack, and wait for about 3 min-utes.3. Remove the screws (11) and the cover (A).A
51Useful Information4. Remove the screws (4).5. Turn over the battery pack (B), pull out all cables from the connector.B6. Insulate the connectors on the built-in battery by covering them with plastic tape, for example.
52Useful InformationInstalling SoftwareInstalling software will return the computer to the default condition. When you install the software, the ash memory data will be erased.Back up important data to other media or an external hard disk before installa-tion. CAUTION l Do not delete the Recovery Partition on the ash memory. The disk space in the partition is not available to store data.To check the Recovery Partition, perform the following methods. 1. Flick from the middle of the Start screen to the top, and then long touch [This PC] under “Windows System”. 2. Touch [Manage] on app bar. Touch [Disk Management]. Remove everything and reinstall WindowsPreparationl <Only for model with TPM> Connect the external keyboard.l Remove all peripherals.l Connect the AC adaptor and do not remove it until installation is com-plete.1 Perform “Remove everything and reinstall Windows”. Display “Charm”, and touch - [Change PC settings] - [Update and recovery] - [Recovery]. Touch [Get Started] under “Remove everything and reinstall Windows”. Touch [Next]. Select the option.y Just remove my les Perform the reinstallation of the Windows in a few moments (Approxi-mately 20 minutes).y Fully clean the drive By fully cleaning, the deleted les can not be recovered easily and the security level will be increased. The processing time will be longer (Approximately 140 minutes).Follow the on-screen instructions.After the reinstallation, the computer will restart.l Do not interrupt installation, for example by turning off the computer or performing other operation.Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
53Useful Information2 Perform the “First-time Operation” ( page 34). NOTE l The date and time, and the time zone may not be correct. Be sure to set them correctly.3 Perform Windows Update.4 Clear TPM. Flick from the middle of the Start screen to the top. Touch [Run] under “Windows System”, input [tpm.msc] and touch [OK]. Touch [Clear TPM…] under “Actions” on the right of the “TPM Manager on Local Computer” screen. Touch [Restart] of the “Manage the TPM security hardware” screen. The computer will restart. When “TPM conguration change was requested to ...” is displayed, press F12. Touch the Desktop tile, and when “TPM is ready” appears, touch [Close].
54Useful InformationInstalling Software Hard disk (Flash memory) recoveryPreparationl Remove all peripherals.l Connect the AC adaptor and do not remove it until installation is com-plete.You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1).If reinstallation using the method described in “Remove everything and reinstall Windows” ( page 52) is not successful, follow the steps below.1 Start the Setup Utility. Display “Charm”, and touch - [Change PC settings] - [Update and recovery] - [Recovery]. Touch [Restart now] under “Advanced startup”. Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].l If the [Panasonic] boot screen is not displayed, turn on the computer while touching top left of the screen.l If the password is requested, enter the Supervisor Password.2 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch [Load Default Values].At the conrmation message, touch [Yes].3 Check the [UEFI Boot] setting of the Setup Utility.[UEFI Boot] should be set to as follows.When installing Windows 8.1 : [Enabled]4 Touch [Exit] and double-touch [Save Values and Reboot].At the conrmation message, touch [Yes].Computer will restart.5 Touch top left of the screen while [Panasonic] boot screen is displayed.The Setup Utility starts up.l If the password is requested, enter the Supervisor Password.6 Touch [Exit] and double-touch [Recovery Partition].7 Touch [Next] and touch [YES].8 At the License Agreement screen, touch [Yes, I agree to the provisions above and wish to continue!] and touch [Next].
55Useful Information9 Touch [Next].If the option is displayed, select the setting and touch [Next].l [Reinstall Windows to the System Disk to factory default.] Select this option when you want to install Windows to the factory default. After installation, you can create a new partition. For how to create a new partition, refer to “To change the partition structure” ( page 35).l [Reinstall to the OS related partitions.]*1 Select this option when the ash memory has already been divided into several partitions and you want to keep the partition structure. For how to create a new partition, refer to “To change the partition structure” ( page 35).*1 This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.10 At the conrmation message, touch [YES].Installation starts according to the instructions on the screen. (It will take approximately 20 minutes.)l Do not interrupt installation, for example by turning off the computer or performing other operation.Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.11 When Ending process screen is displayed, touch [OK] to turn off the computer.12 Turn on the computer.l If the password is requested, enter the Supervisor Password.13 Perform the “First-time Operation” ( page 34). NOTE l The date and time, and the time zone may not be correct. Be sure to set them correctly.14 Start the Setup Utility and change the settings as neces-sary.15 Perform Windows Update.16 Clear TPM ( page 53).
56Useful InformationInstalling Software Using Recovery DiscUse the Recovery Disc in the following conditions.y You have forgotten the administrator password.y Installation is not complete. The recovery partition in the ash memory may be broken.Preparationl Prepare the following items:y Recovery Disc ( Reference Manual “Recovery Disc Creation Utility”)y USB DVD drive (optional) (refer to recent catalogs and other sources for information about the products available)l Remove all peripherals (except for the USB DVD drive).l Connect the AC adaptor and do not remove it until installation is com-plete.1 Connect the DVD drive to the USB port.2 Start the Setup Utility. Display “Charm”, and touch - [Change PC settings] - [Update and recovery] - [Recovery]. Touch [Restart now] under “Advanced startup”. Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].l If the [Panasonic] boot screen is not displayed, turn on the computer while touching top left of the screen.l If the password is requested, enter the Supervisor Password.3 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch [Load Default Values].At the conrmation message, touch [Yes].4 Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should be set to as follows.When installing Windows 8.1 : [Enabled]5 Set the Recovery Disc into the DVD drive.6 Touch [Exit] and double-touch [Save Values and Reboot].At the conrmation message, touch [Yes].Computer will restart.7 Touch top left of the screen while [Panasonic] boot screen is displayed.The Setup Utility starts up.l If the password is requested, enter the Supervisor Password.
57Useful Information8 Touch [Exit] and double-touch your DVD drive in [Boot Override].The computer will restart.9 Touch [Reinstall Windows] and touch [Next].10 At the conrmation message, touch [YES].11 At the License Agreement screen, touch [Yes, I agree to the provisions above and wish to continue!] and touch [Next].12 Touch [Next].If the option is displayed, select the setting and touch [Next].l [Reinstall Windows to the System Disk to factory default.] Select this option when you want to install Windows to the factory default. After installation, you can create a new partition. For how to create a new partition, refer to “To change the partition structure” ( page 35).l [Reinstall to the OS related partitions.]*2 Select this option when the hard disk has already been divided into several partitions and you want to keep the partition structure. For how to create a new partition, refer to “To change the partition structure” ( page 35).*2 This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.13 At the conrmation message, touch [YES].Installation starts according to the instructions on the screen. (It will take approximately 30 - 45 minutes.)l Do not interrupt installation, for example by turning off the computer.Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.14 When Ending process screen is displayed, remove the Recovery Disc and DVD Drive and then touch [OK].Follow the on-screen instructions.Some models may take approximately 40 minutes.15 Perform the “First-time Operation” ( page 33).16 Start the Setup Utility and change the settings as neces-sary.17 Perform Windows Update.18 Clear TPM ( page 53).
58Troubleshooting (Basic)Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the “Reference Manual”. For a software prob-lem, refer to the software’s instruction manual. If the problem persists, contact Panasonic Technical Support ( page 75). You can also check the computer’s status in the PC Information Viewer ( Reference Manual “Troubleshooting (Advanced)”). Starting UpCannot start up.The power indicator or battery indicator is not lit.l Connect the AC adaptor.l Insert a fully charged battery.l Remove the battery pack and the AC adaptor, then connect them again. l If a device is connected to the USB port, disconnect the device, or set [USB Port] or [Legacy USB Support] to [Dis-abled] in the [Advanced] menu of the Setup Utility.l Turn off the concealed mode ( Reference Manual “Tablet Buttons”).l Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should be set to [Enabled].The power is turned on but “Warming up the system” ap-pears.l The computer is warming up before start up. Wait for the computer to start up (the maximum waiting time will be displayed on the screen). If, “Cannot warm up the system” is displayed, the computer failed to warm up and does not start. In this case, turn off the computer, leave it in an envi-ronment of 5 °C {41 °F} or higher temperature for about an hour, and then turn on the power again.Cannot turn on the computer.The computer does not resume from sleep.(The battery indica-tor blinks green and orange alternately.)l Leave it in an environment of 5 °C {41 °F} or higher tem-perature for about an hour, then turn on the power again.
59Troubleshooting Starting UpYou have forgotten the password.l Supervisor Password or User Password: Contact Pana-sonic Technical Support ( page 75).l Administrator password: y If you have a password reset disk, you can reset the ad-ministrator password. Set the disk and enter any wrong password, then follow the on-screen instructions and set a new password.y If you do not have a password reset disk, reinstall ( page 52) and set up Windows, and then set a new password.“Remove disks or other media. Press any key to restart” or a similar mes-sage appears.l A oppy disk is in the drive and it does not contain system startup information. Remove the oppy disk and press any key.l If a device is connected to the USB port, disconnect the device, or set [USB Port] or [Legacy USB Support] to [Dis-abled] in the [Advanced] menu of the Setup Utility.l If the problem persists after removing the disk, it may be a ash memory failure. Contact Panasonic Technical Support ( page 75).Windows startup and operation is slow.l Start the Setup Utility ( Reference Manual “Setup Utility”) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again. (Note that the processing speed depends on the application software, so this procedure may not make Windows faster.)l If you installed a resident software after purchase, turn off the residence.The date and time are incorrect.l Make the correct settings. Open the Control Panel. Flick from the middle of the Start screen to the top and touch [Control Panel] under “Windows System”. Touch [Clock, Language, and Region] - [Date and Time].l If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 75).l When the computer is connected to network, check the date and time of the server.l The 2100 A.D. or later year will not be correctly recognized on this computer.
60TroubleshootingTroubleshooting (Basic) Starting Up[Executing Bat-tery Recalibration] screen appears.l The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on.[Enter Password] does not appear when resuming from sleep/hiberna-tion.l Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility ( Reference Manual “Setup Utility”).l The Windows password can be used instead of the pass-word set in the Setup Utility. Add a password. 1. Display “Charm” and touch - [Change PC settings] - [Accounts]. 2. Touch [Sign-in options], and touch [Add] under “Pass-word”. Set up the following. 1. Open the Control Panel, touch [System and Security] - [Power Options] - [Require a password on wakeup]. 2. Add a check mark for [Require a password].Cannot resume. l One of the following operations may have been carried out. Press the power switch to turn on the computer. Data not saved will be lost.y In sleep mode, the AC adaptor or battery pack was disconnected, or a peripheral was connected or discon-nected.y The power switch was pressed for four seconds or longer to forcibly turn off the computer.l An error may occur when the computer automatically en-ters the sleep or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver.
61Troubleshooting Starting UpOther startup prob-lems.l Start the Setup Utility ( Reference Manual “Setup Utility”) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.l Remove all peripheral devices.l Check to see if there was a disk error. Remove all peripheral devices including an external display. Flick from the middle of the Start screen to the top, and then long touch [This PC] under “Windows System”. Long touch [Windows (C:)], and touch [Properties]. Touch [Tools] - [Check]. Follow the on-screen instructions. Entering PasswordEven after enter-ing the password, password input screen is displayed again.<Only if the external keyboard is connected>l The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input.l The computer may be in Caps Lock mode. If the Caps Lock indicator lights, press Caps Lock to disable the Caps Lock mode, and then input.Cannot log on to Windows. (“The user name or pass-word is incorrect.” is displayed.)l The user name (account name) includes an “@” mark.- If another user account name exists: Log on to Windows using another user account name, and delete the account name that includes “@”. Then cre-ate a new account name. - If no other account name exists: You need to reinstall Windows ( page 52). Shutting downWindows does not shut down.l Remove the USB device.l Wait one or two minutes. It is not a malfunction.
62TroubleshootingTroubleshooting (Basic) DisplayNo display. l The display is turned off by the power-saving function. Touch the screen.l The computer entered sleep or hibernation by the power-saving function. To resume, press the power switch.l When using an external display,y Check the cable connection.y Turn on the display.y Check the settings of external display.The screen is dark. l The screen is darker when the AC adaptor is not con-nected. Open the Dashboard for Panasonic PC and adjust the brightness. As you increase the brightness, battery con-sumption increases.You can separately set the brightness for when the AC adaptor is connected and when not connected.l Turn off the concealed mode ( Reference Manual “Key Combination”).The screen is disor-dered.l Changing the number of display colors and resolution may affect the screen. Restart the computer.l Connecting/disconnecting an external display may affect the screen. Restart the computer. Under factory default set-tings, the brightness of the display screen will adjust auto-matically based on the ambient light detected by the ambi-ent light sensor. You can adjust the settings for this sensor ( page 47).There are red, green, or blue dots on the screen, or there is uneven-ness in colors and brightness on the screen.The following are not malfunctions.l Although advanced high-precision technologies are used in the production of color LCD screens, 0.002% or less of the picture elements may be dark or remain constantly lit (more than 99.998% of elements function properly).l Due to the natural characteristics of LCD screens, you may notice unevenness in colors and brightness depending on your angle of view. Hues may also vary by product.During Simultane-ous display, one of the screens be-comes disordered.l When using the Extended Desktop, use the same display colors for the external display as those used by the LCD. If you continue to experience problems, try changing the display. Long touch on the desktop, and touch [Graphics Proper-ties...] - [Display].l Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.).
63Troubleshooting DisplayThe external dis-play does not work normally.l If the external display does not support the power saving function, it may not work normally when the computer en-ters the power saving mode. Turn off the external display.Cannot rotate the display.l The application program currently running may not support the image rotation. Quit the program, and then try to rotate the image. This can ameliorate the status.l When the automatic rotation is off, screen display does not rotate automatically. ScreenThe pointer does not work.l When using the external mouse, connect it correctly.l When using the external keyboard, restart the computer using the keyboard. l If the computer does not respond to keyboard commands, read “No response” ( page 64).Cannot point the correct position us-ing the stylus.l Perform the screen calibration ( Reference Manual “Screen Input Operation” ).l Use the optional pen.l On the Windows logon screen or the Welcome screen, you may not be able to point the correct position using the stylus. Use the external keyboard or the external mouse to log on. PaymentCannot read the magnetic stripe card.Cannot read the Smart card.l The card may be dirty. Wipe dirt off the card.l The card may not be supported. Follow the on-screen in-structions.Cannot read the electronic money card.l The card may not be supported. Follow the on-screen in-structions.
64TroubleshootingTroubleshooting (Basic) OthersNo response. l Open Task Manager and close the software application that is not responding.l An input screen (e.g., password input screen at startup) may be hidden behind another window. Touch the applica-tion icons at the bottom of the screen to check.l Press the power switch for four seconds or longer to shut down the computer, and then press the power switch to turn it on. If the application program does not work normal-ly, uninstall and reinstall the program. To uninstall, Open the Control Panel. Flick from the middle of the Start screen to the top and touch [Control Panel] under “Windows System”. Touch [Program] - [Uninstall a program].Cannot connect to a network.l Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN] of [Wireless Conguration]) to [Enabled] in the [Ad-vanced] menu of the Setup Utility (Wireless Conguration).l Display “Charm”, and touch - [Change PC Settings] - [Network]. Set [Airplane mode] to [Off], and then; set [Wi-Fi] to [On] (for wireless LAN). set [Mobile broadband] to [On] (for wireless WAN). set [GPS] to [On] (for wireless WAN). set [Bluetooth] to [On] (for Bluetooth).
65AppendixLIMITED USE LICENSE AGREEMENTTHE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selec-tion of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom.LICENSEA. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related docu-mentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with Panasonic Corporation or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the condentiality of the Programs. You may not distribute or otherwise make the Programs or re-lated documentation available to any third party, by time-sharing or otherwise, without the prior written consent of Panasonic Corporation.D. You may not copy or reproduce, or permit to be copied or reproduced, the Pro-grams or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Pro-grams. You shall not modify, or attempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in con-nection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Pro-gram, and the related documentation, to the same party or destroy any such copies not so transferred.
66AppendixLIMITED USE LICENSE AGREEMENTF. You may not remove any copyright, trademark or other notice or product iden-tication from the Programs and you must reproduce and include any such notice or product identication on any copy of any Program.YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANI-CALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PRO-GRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EX-PRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.TERMThis license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon oc-currence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termina-tion, you agree to destroy, at your expense, the Programs and related documenta-tion together with all copies thereof in any form.YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDER-STAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.GOVERNMENT RESTRICTED RIGHTS.The Software is provided with “RESTRICTED RIGHTS.” Use duplication or dis-closure by the government is subject to restrictions as set forth in FAR52.227-14 and DFAR252. 227-7013 et seq. or their successors.Use of the Software by the government constitutes acknowledgement of Intel’s proprietary rights therein.Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.
67AppendixLe(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière dénitive à respecter les termes, clauses et conditions des présentes.Panasonic Corporation a mis au point ou obtenu les Logiciels et vous en concède l’utilisation par les présentes. Vous assumez l’entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pour obtenir les résultats escomp-tés, ainsi que de l’installation, de l’utilisation et des résultats obtenus.LicenceA. Panasonic Corporation vous octroie par les présentes le droit et la licence per-sonnels, non cessibles et non exclusifs d’utiliser les Logiciels conformément aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir qu’un droit limité d’utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n’obtenir aucun droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni vis-à-vis des algorithmes, concepts, dessins, congurations et idées représentés par ou incorporés dans les Logiciels et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à Panasonic Corporation ou à leurs propriétaires.B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accom-pagné par les Logiciels.C. Vous et vos employés ou agents êtes requis de protéger la condentialité des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documen-tation les accompagnant à la disposition d’un tiers, par partage de temps ou de quelque autre manière que ce soit, sans l’autorisation écrite préalable de Panasonic Corporation.D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque n que ce soit, à l’exception d’une (1) copie des Logiciels à des ns de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagné par les Logiciels. Vous ne pouvez ni modier ni tenter de modier les Logiciels.Contrat de licence d’usage limité
68AppendixContrat de licence d’usage limitéE. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu’en rapport avec votre cession du Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vous devez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accom-pagnant, à la même partie ou détruire les copies non cédées.F. Vous ne pouvez retirer aucune marque de droits d’auteur, marque de com-merce ou autre ni aucune identication de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identications de produit sur toutes les copies des Logiciels.Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de façon électronique ou mécanique, en tout ou en partie.Vous ne pouvez utiliser, copier, modier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, à l’exception de ce qui est expressément stipulé dans ce contrat.Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l’exception de ce qui est autorisé au paragraphe E ci-dessus, votre licence est automatiquement résiliée.Termes, clauses et conditionsCette licence n’est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d’une résiliation antérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée, avec application immédiate, si les conditions de résiliation dénies ailleurs dans ce contrat se sont réalisées ou si vous ne respect-ez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez de détruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit.Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes, clauses et conditions. Vous reconnaissez en outre qu’ils sont la description complète et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communication entre nous, relativement à l’objet du présent contrat.
69AppendixThis page provides the specications for the basic model. The model number is different according to the unit conguration.l To check the model number: Check the bottom of the computer or the box the computer came in at the time of purchase.l To check CPU speed, memory size and the ash memory drive size: Run the Setup Utility ( Reference Manual “Setup Utility”) and select [In-formation] menu. [Processor Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Flash memory drive size Main SpecicationsCPU Intel® Celeron® Processor N2807 (1 MB*1 Cache, 1.58 GHz up to 2.16 GHz)Chipset Built-in CPUVideo controller Intel® HD Graphics (Built-in Chip Set)Memory*1*2 (FZ-R1AZAZZJM)2 GB on board (FZ-R1FZAZZBM / FZ-R1KZAZZBM)4 GB on board Video Memory*1*3 UMA 987 MB Max.Storage*4 eMMC: 64 GBApprox. 14 GB is used as a partition with HDD recov-ery tools. (Users cannot use this partition.)Approx. 1 GB is used as a partition with system tools. (Users cannot use this partition.)Display Method 7” WXGA (1280 x 800), Aspect ratio 16:10, Anti-ReectionInternal LCD*5Wireless LAN Intel® Dual Band Wireless-AC 7260 ( page 72)Bluetooth*6 v4.0 Classic mode/ Low Energy mode, Class 1 ( page 73)Sound WAVE and MIDI playback, Intel® High Denition Audio subsystem support, Monaural speakerSecurity Chip TPM (TCG V 1.2 compliant)*7Specications
70AppendixSpecications Main SpecicationsSensor Ambient light sensorEquippedMagnetic sensorGyro sensorAcceleration sensorCard Slot microSD Memory Card*8 microSDXC compatiblemicroSIM Card*9 EquippedPayment Smart Card Reader ISO7816, EMV L1/2 certiedMagnetic Stripe Card Reader ISO7810,7811 and 7813, Track 1/2/3, Encryption headContactless IC Card Reader ISO14443, EMV Contactless L1 certied, PayPass EMV mode and MS mode,PayWave EMV mode and MS modeSAM Card slot × 2Key Pad 16 keys, PCI-PTS4.0 certiedInterfaceUSB port 3.0 × 1*10, Expansion Bus Connector, Head-set Jack (Miniature jack, 3.5 DIA, CTIA standard / Headphone: Impedance 32 Ω, Output Power 4 mW × 2, Stereo / Microphone: Monaural Input)Touchscreen 10 Finger touch (Capacitive)Power Supply AC adaptor or Battery packAC Adaptor*11 Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 16 V DC, 3.75 ABattery Pack Li-ion 7.2 V, 3220 mAh (typ.), 3050 mAh (min.) (with FZ-VZSU94W)Operating Time*12 Approx. 8 hours (with FZ-VZSU94W)Charging Time*13 Approx. 2.5 hours (with FZ-VZSU94W)Built-in bridge battery(not replaceable) (Optional) Li-Polymer 7.4 V, 500 mAh (typ.), 490 mAh (min.)Power Consumption*14 Approx. 15 W*15 / Approx. 60 W (maximum when recharging in the ON state) Physical Dimensions (W × D × H) (excluding projecting parts) 257.0 mm × 130.0 mm × 27.5 mm {10.12 “ × 5.12 “ × 1.08 “} Weight Approx. 650 g {Approx.1.43 lb.} (with FZ-VZSU94W, excluding the optional devices)
71Appendix Main SpecicationsEnvironmentOperat-ing Tempera-ture -10 °C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*16Humidity 30% to 80% RH (No condensation)Storage Tempera-ture -20 °C to 60 °C {-4 °F to 140 °F}Humidity 30% to 90% RH (No condensation) Optional DevicesWireless WAN*17 Sierra™ Wireless High-speed moduleCamera*18 Front 1920 × 1080 dots, 30 fps (Video) / 1920 × 1080 dots (Still), Dual MicrophoneRear 2048 × 1536 dots, 15 fps (Video) / 2592 × 1944 dots (Still) / With camera lightBarcode Reader x 1Large Battery Pack (FZ-VZSU95W)Li-ion 7.2 V, 7100 mAh (typ.), 6800 mAh (min.)Operating Time*12 Approx. 16 hoursCharging Time*13 Approx. 4.5 hoursBuilt-in bridge battery (not replaceable) For battery hot swap
72AppendixSpecications SoftwareBase OS (FZ-R1AZAZZJM)Windows® 8.1 with Bing 64-bit (FZ-R1FZAZZBM / FZ-R1KZAZZBM)Windows® 8.1 Pro 64-bit Installed OS*19Pre-installed Software*19Adobe Reader, PC Information Viewer, Battery Reca-libration Utility, Hand Writing Utility, Inneon TPM Pro-fessional Package*8 *20, Dashboard for Panasonic PC, Recovery Disc Creation Utility, Power Plan Extension Utility, Camera Utility, Intel® PROSet/Wireless Soft-ware, Intel® PROSet/Wireless Software for Bluetooth® Technology, Microsoft Ofce Trial*21, Wireless Manager 6.0*20 *22, Touch Operation Help Utility*20, Touch Screen Mode Setting Utility, Display Rotation Tool, Display Helper, Barcode Setting Utility*23, Barcode Congura-tion Utility*23, Barcode HID Language Setting Utility*23, Barcode HID Mode Setting Utility*23, GPS Viewer*24Wireless Toolbox, Camera for Panasonic PCAptio Setup Utility, PC-Diagnostic Utility, Hard Disk Data Erase Utility*25 Wireless LANData Transfer Rates*26 IEEE802.11a : 54 MbpsIEEE802.11b : 11 MbpsIEEE802.11g : 54 MbpsIEEE802.11n : HT20 : 150 Mbps HT40 : 300 MbpsIEEE802.11ac : VHT80 : 866.7 Mbps VHT40 : 433.3 MbpsStandards Supported IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n / IEEE802.11acTransmission method OFDM system, DSSS systemWireless Channels Used IEEE802.11ac / IEEE802.11a / IEEE802.11n : Channels 36/40/44/48/52/56/60/64/100/104/108/ 112/116/120/124/128/132/136/140/149/153/157/ 161/165IEEE802.11b / IEEE802.11g / IEEE802.11n : Channels 1 to 11
73Appendix Wireless LANRF Frequency Band 2.4 GHz Band : 2.412 GHz - 2.462 GHz5 GHz Band : 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz Bluetooth*6Bluetooth Version 4.0Classic mode / Low Energy modeTransmission method FHSS systemWireless Channels Used Channels 1 to 79 / Channels 0 to 39RF Frequency Band 2.402 GHz - 2.480 GHz*1 1 MB = 1,048,576 bytes/1 GB = 1,073,741,824 bytes*2 Memory size of the factory default depends on the model. You can physically expand the memory up to 8 GB, but the total amount of usable memory available will be less depending on the actual system conguration.*3 A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video Memory cannot be set by the user.*4 1 MB = 1,000,000 bytes / 1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.*5 Depending on the OS settings.*6 Does not guarantee operation of all Bluetooth peripherals.*7 For information on TPM, on the Start screen, touch the [Manual Selector] tile, and se-lect “Installation Manual for Trusted Platform Module (TPM)”.*8 Operation has been tested and conrmed using Panasonic microSD Memory Card with a capacity of up to 2 GB and Panasonic microSDHC Memory Card with a capacity of up to 32 GB. Operation on other microSD equipment is not guaranteed. *9 Only for model with wireless WAN. The slot accepts microSIM Cards. 12 mm{0.47”}15 mm{0.59”}*10 Does not guarantee operation of all USB-compatible peripherals.*11 <Only for North America> The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC compatible AC cord. 20-M-1-1*12 Measured at LCD brightness: 60 cd/m2 Varies depending on the usage conditions, or when an optional device is attached.
74AppendixSpecications*13 Varies depending on the usage conditions.*14 Approx. 0.5 W when the battery pack is fully charged (or not being charged) and the computer is OFF. <When using with 115 V AC> Even when the AC adaptor is not connected to the computer, power is con-sumed (Max. 0.3 W) simply by having the AC adaptor plugged into an AC outlet.*15 Rated power consumption 23-E-1*16 Do not expose the skin to this product when using the product in a hot or cold environ-ment. ( page 7) When using in hot or cold environment, some peripherals and battery pack may fail to work properly. Check the operation environment of the peripherals. Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments. When using in low temperature environment, startup may become slow or battery op-eration time may become short. The computer consumes power when the hard disk is warming up during startup. Therefore, if you are using battery power and the remaining power is low, the computer may not start up.*17 Only for model with wireless WAN. The specications may differ depending on the models.*18 Only for model with camera. Depending on the specication of application software, the following cases may occur. In these cases, select a smaller resolution.y Cannot select a large resolution.y When selecting a large resolution, an error occurs.*19 Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installed by using the hard disk recovery and the recovery disc.*20 Must be installed before use.*21 To continue using this software after the end of the trial, purchase a license by following the on-screen instructions.*22 For information on Wireless Manager, refer to the supplementary instructions by the fol-lowing procedure. Touch on the Start screen. Touch [Run] under “Windows System”, input “c:\util\wlprjct\Supplementary Instruc-tions.pdf” then touch [OK].*23 Only for model with barcode reader.*24 Only for model with wireless WAN.*25 Perform on the recovery disc.*26 Maximum data transfer rates of wireless LAN standards. Actual speeds may differ.
75AppendixLIMITED WARRANTYFor U.S.A.Panasonic System Communications Company of North America (PSCNA)Computer Products - Worldwide WarrantiesSection 1: Limited Warranty - HardwarePSCNA, referred to hereinafter as “Panasonic”, will repair the products listed below with new or rebuilt parts, free of charge in a Global Panasonic designated service location or Panasonic Authorized Service Center for the period specied below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered.• Laptop PC (CF-##) - 3 Years • Ultra-Mobile (CF-U#/CF-H# Series) - 3 Years• Tablet PC (FZ-## / JT-B# ) - 3 Years • PDRC - LCD & Keyboard Assembly - 3 YearsOriginal Battery WarrantyBatteries supplied with the product are covered under the warranty for one (1) year from date of purchase.Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A replacement battery furnished under the product warranty is covered for the remaining period of the one year warranty on the original or purchased battery.Optional: Extended Warranty Program (PC) If this coverage is purchased, the serial numbered unit is entitled to the same warranty coverage on the unit with the exception of the battery. The cost of labor, parts, and shipping are included in the price of the Extended Warranty Program.Optional: Panasonic “Protection Plus” WarrantyAny unit for which the Panasonic “Protection Plus” warranty has been purchased will receive additional coverage for any failure that occurs due to accidental damage. All other terms and conditions of the standard warranty apply and this additional coverage will exist for the duration of the standard warranty period of the unit. If an extended Protection Plus warranty program is purchased, coverage is extended to the end of the last year of extended coverage purchased.This warranty does not cover failures or defects that are caused by re, intentional acts, loss, theft, improper maintenance, modication or service by anyone other than a Panasonic Authorized Service Provider, or damage that is attributable to acts of God. Cosmetic damage that does not affect functionality is not covered. Cosmetic damage on units with hardware failures will be repaired in accordance with the warranty terms. This warranty is extended solely to the original purchaser on the unit serial number for which it was purchased. Complete unit replacement fullls the full obligation and is at the discretion of Panasonic and is limited to once during the coverage term.Refer to the Panasonic website for full terms and conditions on the above programs.
76AppendixLIMITED WARRANTYWireless Module WarrantyPanasonic approved wireless modems installed in Panasonic brand computers and integrated by Panasonic or an Authorized Panasonic Wireless Integrator are covered under the warranty for the remaining warranty period of the device in which the modem is installed. For devices with less than three (3) months remaining on the unit warranty, the wireless modem will be covered for a period of three (3) months from the date of installation of the modem, covering only modem replacement or modem installation related issues.All modems must be approved by the wireless carrier prior to use. Any use or attempted use of a wireless modem not approved and activated by the carrier for use on their network is strictly prohibited and is not sanctioned or warranted by Panasonic and may result in legal action. In addition, all modems must be approved by Panasonic as compatible with the device hardware before installation or use. Panasonic’s sole responsibility for the warranty or technical support of the software required to install or operate the modem is dened in Section 2 (Limited Software Warranty). Any attempted software installation by anyone other than a Panasonic Authorized Wireless Integrator is not covered under warranty and may result in service charges. Installation or attempted installation by any party other than Panasonic or an Authorized Panasonic Wireless Integrator is strictly not covered under the warranty and may void the computer warranty if damage results.Options and Accessories Warranties The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period specied from the date of purchase or as specically stated: • AC Adapter / Power Cord – 3 Years• Memory Expansion Card (Panasonic Brand) – 3 Years• Desktop Port Replicator, I-O Box, Docking Cradle (like CF-U1) – 3 Years• Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed• Integrated Panasonic supplied options and kits including, but not limited to Wireless Modems, Media Bay Drives (Floppy, CD, DVD, Combo), Camera, GPS, Bluetooth, Smartcard Reader, Magnetic Card Reader, Barcode Scanner, and Fingerprint Reader - 3 Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or an Authorized Integrator.• Hard Drive / Solid State Drive (Internal) - 3 Years• Separately purchased 2nd Hard Drive – 1 Year • External USB Drives (CD / DVD / Floppy / Hard Drive) – 1 Year• Optional Battery – 1 Year• Battery Charger / Multi-Bay Battery Charger – 1 Year• Stylus Pens, Digitizer & Standard - 90 Days (physical damage excluded)
77AppendixSection 2 - Limited Warranty - SoftwarePanasonic warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other mediaPanasonic’s entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period.Section 3 - Limited Warranty Exclusions - Specically excluded from the warranty are:• All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a separate warranty. • Failures related to the product operating system, hard drive or solid state drive image, software setup, software program, virus, other program(s) or file(s) on any drive or in any computer memory location. • Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit. • Any unit or device with a missing or altered model number or serial number label • Cosmetic damage or any damage which occurs in shipment • Failures which are caused by products not supplied by Panasonic • Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modification, use not in accordance with product use instructions • Failures due to service by anyone other than a Panasonic Authorized Service Provider • Failures caused by improper installation of options or accessories or due to integration by any company other than Panasonic or a Panasonic Authorized Integrator • Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser • Damage that is attributable to acts of God THIS PRODUCT IS NOT INTENDED FOR USE AS OR PART OF NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
78AppendixLIMITED WARRANTY*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include class 2 Electronic Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of ight (e.g., during take-off and landing) and/or mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No. 36.Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specic legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline at 1-855-PSC-TECH [option 1] (855-772-8324).
79AppendixFor CanadaPANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the rst end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specied.Scope of Coverage Period of Cover-age Type of Failure Coverage• Laptop Computers (except Battery) and AC Adaptor• Factory/PCI installed options including Wireless WAN, GPS, Bluetooth, Finger print reader, Backlit keyboard, Memory Card and Media Bay Drives (Floppy, CD/DVD)• Mobile Wireless Display • PDRC – LCD and Keyboard Assemblies• Port ReplicatorThree (3) Years from Date of Original End User Customer Pur-chaseDefective Materials or Workmanship• Hand-held Computers• Battery• Battery charger• Auto Adaptor• External USB DrivesOne (1) Year from Date of Original End User Customer Pur-chaseDefective Materials or Workmanship• Digitizer pen or stylus Ninety (90) Days from Date of Original End User Customer PurchaseDefective Materials or Workmanship• All consumable items including protec-tion lm, cleaning cloth, carry case, tether and harnessNo CoverageRemedy – In the event of a warranty claim, contact PCI’s representatives within the ap-plicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited War-ranty for the balance of the original period of warranty coverage.No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not autho-rized by PCI, or act of God.THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIP-MENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.LIMITED WARRANTY (GARANTIE LIMITÉE)
80Appendix*2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of ight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36 IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICECarefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.SOFTWARE MEDIA LIMITED WARRANTYCoverage – PCI warrants to you, the rst end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product.THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Pana-sonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Mississauga, Ontar-io L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or prot loss, or special, indirect or consequential damages, or other claims, whether or not of similar character.No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specied by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modi-cation or attempted modication of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media.GENERALNO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EX-PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND AC-CESSORIES.NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LI-ABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT.NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE.Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.LIMITED WARRANTY (GARANTIE LIMITÉE)
81AppendixPour le CanadaGARANTIE LIMITÉE – ORDINATEURS ET PÉRIPHÉRIQUES PANASONICCouverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que ce produit in-formatique (à l’exclusion des supports des logiciels) est, au moment de sa vente par PCI ou d’un revendeur agréé par PCI, exempt de défauts de pièces et de fabrication dans les conditions normales d’utilisation, et ce, pendant la période de couverture de la garantie, sous réserve des modalités décrites ci-dessous.Éléments couverts Durée de couver-ture Type de couverture• Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur• Options installées en usine/par PCI incluant : WAN sans l, GPS, Bluetooth, lecteur d’empreintes digitales, clavier rétroéclairé, carte mémoire et lecteurs (disquettes, CD/DVD)• Écran mobile sans l• Ensembles PDRC – ACL et clavier• Duplicateur de portTrois (3) ans à partir de la date d’achat original.Défauts de pièces et de fabrication• Ordinateurs de poche• Batterie• Chargeur de batterie• Adaptateur pour voiture• Périphériques USBUn (1) an à partir de la date d’achat origi-nal.Défauts de pièces et de fabrication• Stylo pointeur standard ou pour numéri-seur graphiqueQuatre-vingt-dix (90) jours à partir de la date d’achat original.Défauts de pièces et de fabrication• Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, étuis de transport, longes et sanglesAucune couvertureRecours – Pour obtenir des informations sur la marche à suivre dans le cas où une récla-mation en vertu de la garantie deviendrait nécessaire, communiquez par téléphone avec un représentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de l’Est) du lundi au vendredi (sauf les jours fériés), avant l’échéance de la garantie applicable, en prenant soin d’identier la nature de la défaillance. Un reçu ou toute autre pièce justicative de la date d’achat original sera exigé avant toute réparation. Toute pièce défectueuse couverte par la présente garantie limitée sera réparée ou remplacée par une pièce neuve ou remise à neuf. Le remplacement ou la réparation sera fait conformément aux modalités de la présente garantie limitée pendant la durée restante de la période originale de la garantie.Produits non couverts – La présente garantie limitée ne couvre pas les produits achetés à l’extérieur du Canada. Elle ne couvre pas non plus les dommages, la défaillance ou les défauts attribuables à une manutention inadéquate, une mauvaise installation, une utilisa-tion anormale ou abusive, de la négligence, un accident, un déversement ou la pénétration d’un objet étranger, une modication, un cas fortuit ou une réparation effectuée par une personne non agréée par PCI.
82AppendixCE PRODUIT N’EST PAS DESTINÉ À ÊTRE UTILISÉ, EN TOUT OU EN PARTIE, COMME SYSTÈME/ÉQUIPEMENT NUCLÉAIRE, SYSTÈME/ ÉQUIPEMENT DE CONTRÔLE DU TRAF-FIC AÉRIEN OU SYSTÈME/ÉQUIPEMENT DE POSTE DE PILOTAGE D’AVION*3. PANASONIC DÉCLINE TOUTE RESPONSABILITÉ CONCERNANT L’UTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNÉS.*3 Les SYSTÈMES/ÉQUIPEMENTS DE POSTE DE PILOTAGE D’AVION sont dotés de systèmes OEPP (organiseur électronique de poste de pilotage) de classe 2 et de classe 1 utilisés pendant des phases critiques de vol (par exemple, pendant le décol-lage et l’atterrissage) et(ou) montés sur l’avion. Les systèmes OEPP de classe 1 et de classe 2 sont dénis par le circulaire d’information FAA: AC (Advisory Circular) 120-76A ou le feuilet n° 36 JAA: JAA TGL (Temporary Guidance Leaets) No 36.EXPÉDITION DU PRODUIT POUR SERVICE SOUS GARANTIEEmballez soigneusement le produit, de préférence dans son emballage d’origine. Joignez une description de la défaillance de même qu’une pièce justicative de la date d’achat. Panasonic Canada Inc. ne peut être tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur.GARANTIE LIMITÉE – SUPPORTS DES LOGICIELSCouverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que la ou les disquettes ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de défauts de pièces et de fabrication dans des conditions normales d’utilisation au Cana-da, et ce, pour une période de soixante (60) jours suivant la date de réception indiquée sur la preuve d’achat.LA PRÉSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUP-PORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous à la garantie écrite du concédant de licence d’utilisation du logiciel (qui accompagne la copie du logiciel) pour toute réclamation en vertu de la garantie.Réclamation – marche à suivre – Panasonic Canada Inc. remplacera toute disquette ou support défectueux si l’article en question est retourné, port payé, à son service de Marketing – produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante (60) jours suivant la date d’achat original. Joignez à votre envoi une pièce justicative de votre achat et une description du problème.Recours – La responsabilité de PCI - et votre seul recours - dans le cas de toute défaillance couverte par la garantie sur ce support de logiciel est limitée au seul remplacement du sup-port. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte d’usage ou de prots, ni aucun dommage spécial, indirect ou consécutif, ni aucune autre réclamation de nature similaire ou autre.Produits non couverts – La présente garantie limitée ne s’applique pas si la ou les disquettes ou autre support ont été utilisés dans un produit d’une marque autre que Panasonic ou dans des conditions environnementales autres que celles spéciées par PCI ou le fabricant, ou sou-mis à une mauvaise utilisation, à la négligence, à une manutention inadéquate ou encore si le programme a été modié ou subi une tentative de modication ou des dommages attribuables à un accident ou à un cas fortuit. De plus, PCI n’assume aucune responsabilité pour toute perte de, ou tout dommage à, un programme, des données ou un support de sauvegarde amovible.LIMITED WARRANTY (GARANTIE LIMITÉE)
83AppendixGÉNÉRALITÉSPCI NE RECONNAÎT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET D’UTILITÉ À UNE FIN QUELCONQUE, À L’ÉGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PÉRIPHÉRIQUES ET AC-CESSOIRES.SOUS AUCUNE CIRCONSTANCE PCI NE POURRA ÊTRE TENUE RESPONSABLE DES DOMMAGES SPÉCIAUX, INDIRECTS OU CONSÉCUTIFS ATTRIBUABLES À UN MAN-QUEMENT AUX GARANTIES LIMITÉES DÉCRITES DANS LE PRÉSENT DOCUMENT OU À L’UTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRIC-TION, LA PERTE DE DONNÉES, D’AFFAIRES, D’ACHALANDAGE OU DE PROFIT.DANS TOUS LES CAS, LA RESPONSABILITÉ MAXIMALE DE PCI POUR TOUT MAN-QUEMENT NE POURRA EXCÉDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE.AUCUNE RÉCLAMATION, SANS ÉGARD À SES MOTIFS, NE POURRA ÊTRE FAITE AUPRÈS DE PCI PLUS DE DEUX (2) ANS APRÈS LES FAITS INVOQUÉS À LA BASE D’UNE TELLE RÉCLAMATION.Garantie statutaires – Certaines juridictions interdisent de telles limitations ou exclusions; aussi, pourraient-elles ne pas s’appliquer.
Panasonic System Networks Co., Ltd.Fukuoka, JapanPanasonic System Communications Company of North AmericaTwo Riverfront Plaza,Newark NJ 07102Panasonic Canada Inc.5770 Ambler Drive, Mississauga,Ontario L4W 2T3Web Site : http://panasonic.net/© Panasonic System Networks Co., Ltd. 2015Printed in JapanPB0115-0DFQW5A48ZAAs an ENERGY STAR® Partner, Panasonic Corporation has determined that this product meets ENERGY STAR® guidelines for energy efciency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy. To learn more about power management, please visit the web site:www.energystar.gov/index.cfm?c=power_mgt.pr_power_managementOutline of the International ENERGY STAR® Ofce Equipment Program The international ENERGY STAR® Ofce Equipment Program is an international program that promotes energy saving through the use of computers and other ofce equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are ofce equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.For information about ENERGY STAR®, refer to the following web site:Web Site: www.energystar.gov 22-M-1

Navigation menu