Panasonic of North America PT-VW350 LCD PROJECTOR User Manual PT VW350 Manual Part 1 1

Download:
Mirror Download [FCC.gov]
Document ID	2596823
Application ID	gAbGUTSI1nsqqgrtNryKYA==
Document Description	PT-VW350_Manual Part 1-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	332.03kB (4150366 bits)
Date Submitted	2015-04-26 00:00:00
Date Available	2015-04-30 00:00:00
Creation Date	2015-04-16 18:30:59
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2015-04-16 18:31:09
Document Title	PT-VW350_Manual Part 1-1
Document Creator	Adobe InDesign CS5.5 (7.5)

Operating Instructions
Functional Manual
LCD Projector   Commercial Use
Model No.
PT-VW350
PT-VX420
Thank you for purchasing this Panasonic Product.
■■ Before operating this product, please read the instructions carefully, and save this manual
for future use.
■■ Before using your projector, be sure to read “Read this first!” (xpages 2 to 8).
ENGLISH
TQBJ0860
Read this first!
Read this first!
WARNING:
THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain
or moisture.
This device is not intended for use in the direct field of view at visual display workplaces. To avoid
incommoding reflexions at visual display workplaces this device must not be placed in the direct
field of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing
type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing
plug.
WARNING:
WARNING:
CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET
BEFORE REPLACING THE LAMP UNIT.
To assure continued compliance, follow the attached installation instructions. This includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modifications to this equipment could void the user's
authority to operate this device.
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic
environment.
Directive 2009/125/EC
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
2 - ENGLISH
Read this first!
WARNING:
•• Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
•• For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building
installation wiring.
•• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
CAUTION (North/Middle/South America)
CAUTION:
This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This plug
will only fit a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number:
PT-VW350, PT-VX420
Trade Name :
Panasonic
Responsible Party :
Panasonic Corporation of North America
Address :
Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact :
http://www.panasonic.com/support
Projector Contact :
http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes
using the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to
operate this device.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Notice (USA only):
•• This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your
community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-769-0149.
ENGLISH - 3
Read this first!
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in
this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse
cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an
Authorised Service Center.
If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut
off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow:
Blue:
Brown:
Earth
Neutral
Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the plug which is
marked with the letter E or by the Earth symbol
or coloured GREEN or GREEN - AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the
letter L or coloured RED.
ASA
HE
-8
13
A2
50
BS
13
63
/A
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
4 - ENGLISH
Read this first!
To remove the battery
1. Press the guide and lift the cover.
2. Remove the batteries.
(ii)
(i)
Brazil Only
Brasil Apenas
„„ Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa
destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper
a blindagem e produzir fogo.(Fig. 1)
Fita Isolante
Fig. 1
Como isolar os terminais
(ii)
(i)
Fita Isolante
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem ficar expostas a
temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danificar o lacre
do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos
terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante
água. Caso haja irritação, consulte um médico.
„„ Remoção das baterias
1. Pressione a guia e levante a tampa.
2. Remova as baterias.
(ii)
(i)
ENGLISH - 5
Read this first!
WARNING:
„„ POWER
The wall outlet shall be installed near the equipment and shall be easily accessible when problems
occur. If the following problems occur, disconnect the power plug from the wall outlet immediately.
Continued use of the projector in these conditions will result in fire or electric shock.
zz If foreign objects or water get inside the projector, disconnect the power plug from the wall outlet.
zz If the projector is dropped or the cabinet is broken, disconnect the power plug from the wall outlet.
zz If you notice smoke, strange smells or noise coming from the projector, disconnect the power plug from the
wall outlet.
zz You have to disconnect the power plug from the wall outlet to cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
zz Do not damage the power cord, make any modifications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
zz Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in fire or electric shocks. Please note that if you do not use the provided power
cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a fire.
zz If dust builds up on the power plug, the resulting humidity can damage the insulation.
zz If not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
„„ ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in fire, electric shocks or components deterioration. Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling
to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
zz Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the
projector from falling down. (Install in a different location to the ceiling mount bracket.)
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector.
zz Do not place the projector in narrow, badly ventilated places.
zz Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
zz Provide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm
(20") of space between any walls or objects and the intake port.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
zz Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
6 - ENGLISH
Read this first!
WARNING:
Do not look at or place your skin into the lights emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
zz Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
zz Be especially careful not to let young children look into the lens. In addition, turn off the power and disconnect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
zz For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the projector.
zz Do not place containers of liquid or metal objects near the projector.
zz If liquid enters inside of the projector, consult your dealer.
zz Particular attention must be paid to children.
Use the ceiling mount bracket specified by Panasonic.
Using the ceiling mount bracket other than the specified one will result in falling accidents.
zz Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
„„ ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
zz Do not use unspecified batteries.
zz Do not use chargeable batteries.
zz Do not disassemble dry cell batteries.
zz Do not heat the batteries or place them into water or fire.
zz Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.
zz Do not store or carry batteries together with metallic objects.
zz Store the batteries in a plastic bag and keep them away from metallic objects.
zz Make sure the polarities (+ and -) are correct when inserting the batteries.
zz Do not use a new battery together with an old battery or mix different types of batteries.
zz Do not use batteries with the outer cover peeling away or removed.
Do not allow children to reach the batteries.
Accidentally swallowing them can cause physical harm.
zz If swallowed, seek medical advice immediately.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.
zz Battery fluid on your skin or clothing could result in skin inflammation or injury.
Rinse with clean water and seek medical advice immediately.
zz Battery fluid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
zz The lamp can easily explode if struck against hard objects or dropped.
zz Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall
outlet.
Electric shocks or explosions can result if this is not done.
zz When replacing the lamp unit, turn the power off and allow the lamp to cool for at least 1 hour before handling it otherwise it can cause burns.
Do not use the supplied power cord with devices other than this projector.
zz Using the supplied power cord with devices other than this projector may cause short circuits or overheating, and result in electric shock or fire.
Remove the depleted batteries from the remote control promptly.
zz Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.
ENGLISH - 7
Read this first!
CAUTION:
„„ POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in fire or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Failure to do so may result in electric shock.
„„ ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
zz Be especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in fire.
zz Take particular care in locations exposed to direct sunlight or near stoves.
Do not place the projector where it may be affected by salt or corrosive gas.
Doing so may cause the projector to become faulty due to corrosion.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause fire or damage to the object and can cause the projector to malfunction.
zz Extremely strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
zz Extremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks to
occur.
When mounting the projector on the ceiling, keep mounting screws and power cord from contact with
metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into  terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
„„ ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which
contains nearly the same amount of mercury as fluorescent lamp, and the broken pieces will cause injury.
zz If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical
advice immediately.
zz Ask your dealer about replacing the lamp unit and check the inside of the projector.
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire
or contamination of surrounding area.
„„ MAINTENANCE
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in fire.
zz For cleaning fee, ask your dealer.
8 - ENGLISH
rrTrademarks, etc.
ff Windows, Windows Vista and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries.
ff Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other countries.
ff HDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing
LLC.
ff PJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and regions.
ff RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.
Crestron ConnectedTM and Fusion RV are trademarks of Crestron Electronics, Inc.
ff Adobe, Adobe Flash Player and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc. in the United
States and/or other countries.
ff Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by Ricoh Company,
Ltd.
ff Other names, company names or product names used in these operating instructions are the trademarks or registered
trademarks of their respective holders.
Please note that the operating instructions do not include the ® and ™ symbols.
Software information regarding this product
This product incorporates the following software.
(1) The software which is developed independently by or for Panasonic Corporation
(2) The software owned by third party and licensed to Panasonic Corporation
(3) The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL V2.1)
The software categorized as (3), the license is available in accordance with gnu lesser general public license, it is distributed
in the hope that it will be useful, but without any warranty, without even the implied warranty of merchantability or fitness for a
particular purpose. As for the terms and conditions, please refer to the software license of the supplied CD-ROM.
If you wish to ask any questions as to the software, please contact (sav.pj.gpl.pavc@ml.jp.panasonic.com) by email.
rrIllustrations in these operating instructions
ff Note that illustrations of the projector and screens may differ from the ones you actually see.
rrPage references
ff In these instructions, references to pages are indicated as: (Æ page 00).
rrTerm
ff In these instructions, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
ENGLISH - 9
Features of the Projector
High Contrast
▶▶A high contrast of 12 000:1 is achieved by
the unique optical system.
Quick Steps
For details, see the corresponding pages.
1. Set up your projector.
(x page 26)
Auto Setup Function
▶▶This function executes [SHIFT], [CLOCK
PHASE], [DOT CLOCK] at the same time
by pressing the  button.
Direct Power Off Function
▶▶With the Direct Power Off function, you can
disconnect the power cord from the wall
outlet or turn off the breaker even during
projection.
Wired LAN Function
▶▶This function allows you to project an
image on a computer as well as operate
and manage the projector via network.
Useful Functions for Presentations
▶▶The digital zoom function allows you to
focus on the crucial information during a
presentation.
▶▶The MIC function and 10 W audio output
allows you to make a presentation without
any external audio equipment.
2. Connect with other devices.
(x page 30)
3. Connect the power cord.
(x page 35)
4. Power on.
(x page 36)
5. Make initial settings.
(x page 36)
ffTake this step when you power on for the first time after
purchasing the projector.
6. Select the input signal.
(x page 40)
7. Adjust the image.
(x page 40)
10 - ENGLISH
Contents
Contents
Contents
Read this first!.............................................2
Chapter 1 Preparation
Precautions for use.................................................. 14
Cautions when transporting................................... 14
Cautions when installing........................................ 14
Security................................................................. 15
Disposal................................................................. 16
Cautions on use.................................................... 16
Accessories........................................................... 17
Contents of the supplied CD-ROM........................ 18
Optional accessories............................................. 18
About your projector................................................ 19
Remote control...................................................... 19
Projector body....................................................... 20
Preparing the remote control.................................. 23
Inserting and removing batteries........................... 23
When using the system with multiple projectors... 23
Attaching the Lens Cap........................................... 24
Chapter 2 Getting Started
Setting up.................................................................. 26
Installation mode................................................... 26
Parts for ceiling mount (optional)........................... 26
Screen size and throw distance............................ 27
Adjusting adjustable feet....................................... 29
Connecting................................................................ 30
Before connecting................................................. 30
Connecting example : AV equipment.................... 32
Connecting example : Computers......................... 32
Connecting example : Audio.................................. 33
Chapter 3 Basic Operations
Powering on/off........................................................ 35
Connecting the power cord................................... 35
Power indicator...................................................... 35
Powering On the Projector.................................... 36
When the initial setting screen is displayed........... 36
Making adjustments and selections...................... 38
Powering Off the Projector.................................... 39
Direct Power Off function...................................... 39
Projecting.................................................................. 40
Selecting the input signal...................................... 40
How to adjust the state of the image..................... 40
Basic operations by using the remote control...... 41
Using the AUTO SETUP function.......................... 41
Using the KEYSTONE button................................ 41
Switching the input signal...................................... 42
Using the FUNCTION button................................. 42
Using the FREEZE function.................................. 42
Be sure to read “Read this first!” from page 2.
Using the AV MUTE function................................. 43
Using the P-TIMER function.................................. 43
Using the DIGITAL ZOOM function....................... 43
Controlling the volume of the speaker................... 44
Using the MUTE function...................................... 44
Using the P IN P function...................................... 45
Setting the ID number of the remote control......... 45
Chapter 4 Settings
Menu Navigation....................................................... 47
Navigating through the menu................................ 47
Resetting adjustment values to the factory
default................................................................. 48
Main menu............................................................. 48
Sub-menu.............................................................. 49
[PICTURE] menu....................................................... 51
[PICTURE MODE]................................................. 51
[CONTRAST]......................................................... 51
[BRIGHTNESS]..................................................... 52
[COLOR]................................................................ 52
[TINT].................................................................... 52
[SHARPNESS]...................................................... 52
[COLOR TEMPERATURE].................................... 53
[IRIS]..................................................................... 53
[ADVANCED MENU]............................................. 53
[DAYLIGHT VIEW]................................................. 53
[DIGITAL CINEMA REALITY]................................ 54
[NOISE REDUCTION]........................................... 54
[TV-SYSTEM]........................................................ 54
[RGB/YPBPR]/[RGB/YCBCR]................................. 55
[POSITION] menu..................................................... 56
[REALTIME KEYSTONE]...................................... 56
[KEYSTONE]......................................................... 56
[SHIFT].................................................................. 58
[DOT CLOCK]....................................................... 58
[CLOCK PHASE]................................................... 58
[OVER SCAN]....................................................... 59
[ASPECT].............................................................. 59
[FRAME LOCK]..................................................... 60
[LANGUAGE] menu.................................................. 61
[LANGUAGE]........................................................ 61
[DISPLAY OPTION] menu ........................................ 62
[ON-SCREEN DISPLAY]....................................... 62
[HDMI SIGNAL LEVEL]......................................... 63
[CLOSED CAPTION SETTING]............................ 63
[SCREEN SETTING] ............................................ 64
[STARTUP LOGO]................................................. 64
[AUTO SETUP SETTING]..................................... 65
[SIGNAL SEARCH]............................................... 65
[BACK COLOR]..................................................... 65
[WIDE MODE]....................................................... 65
[SXGA MODE]....................................................... 65
ENGLISH - 11
Contents
[P-TIMER].............................................................. 66
[P IN P].................................................................. 67
[OTHER FUNCTIONS].......................................... 67
[PROJECTOR SETUP] menu................................... 69
[STATUS]............................................................... 69
[COMPUTER2 SELECT]....................................... 69
[PROJECTOR ID].................................................. 69
[INITIAL START UP].............................................. 70
[PROJECTION METHOD]..................................... 70
[HIGH ALTITUDE MODE]...................................... 70
[LAMP POWER].................................................... 71
[ECO MANAGEMENT].......................................... 71
[EMULATE]............................................................ 72
[FUNCTION BUTTON].......................................... 73
[AUDIO SETTING]................................................ 73
[TEST PATTERN].................................................. 75
[FILTER COUNTER]............................................. 75
[INITIALIZE ALL]................................................... 75
[SECURITY] menu.................................................... 76
[PASSWORD]........................................................ 76
[PASSWORD CHANGE]....................................... 76
[TEXT DISPLAY]................................................... 77
[TEXT CHANGE]................................................... 77
[MENU LOCK]....................................................... 77
[MENU LOCK PASSWORD]................................. 77
[CONTROL DEVICE SETUP]................................ 78
[NETWORK] menu.................................................... 79
[WIRED LAN]........................................................ 79
[NAME CHANGE].................................................. 80
[NETWORK CONTROL]....................................... 80
[AMX D.D.]............................................................ 80
[Crestron Connected(TM)]..................................... 80
[STATUS]............................................................... 81
[INITIALIZE]........................................................... 81
Network connections............................................. 81
Accessing from the web browser.......................... 83
Chapter 5 Maintenance
Lamp and Warning Indicators................................. 98
When an indicator lights up................................... 98
Maintenance/replacement....................................... 99
Before performing maintenance/replacement....... 99
Maintenance.......................................................... 99
Replacing the unit.................................................. 99
Troubleshooting..................................................... 103
Chapter 6 Appendix
Technical Information............................................ 105
PJLink protocol.................................................... 105
Control commands via LAN................................. 106
Serial terminal..................................................... 108
[MENU LOCK PASSWORD] operations..............110
Two window display combination list....................111
List of compatible signals.....................................112
12 - ENGLISH
Specifications......................................................... 114
Dimensions............................................................. 116
Ceiling mount bracket safeguards....................... 117
Index........................................................................ 118
Chapter 1
Preparation
This chapter describes things you need to know or check before using the projector.
ENGLISH - 13
Chapter 1 Preparation - Precautions for use
Precautions for use
Cautions when transporting
ff When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may
damage the internal parts and result in malfunctions.
ff Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Cautions when installing
rrDo not set up the projector outdoors.
ff The projector is designed for indoor use only.
rrDo not use under the following conditions.
ff Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts and result in
malfunctions.
ff Locations near the sea or areas affected by corrosive gas: Corrosion may damage internal components or cause the
projector to malfunction.
ff Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate in rare cases due
to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other
equipment, or the air from the air conditioner does not blow toward the front of the projector.
ff Places with sharp temperature fluctuations such as near lights (studio lamp): Doing so may shorten the life of the lamp, or
result in deformation of the outer case due to heat, which may cause malfunctions.
The operating environment temperature of the projector should be between 0 °C (32 °F) and 40 °C (104 °F)*1 when using it
at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 30 °C (86 °F) when using it at high
altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level).
*1 W
 hen the operating environment temperature of the projector is between 35 °C (95°F) and 40 °C (104 °F), the lamp mode will change to
[ECO] automatically.
ff Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
rrBe sure to ask a specialized technician when installing the product to a ceiling.
This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.:
① ET-PKL100H (for high ceilings), ET-PKV400B (Projector Mount Bracket)
② ET-PKL100S (for low ceilings), ET-PKV400B (Projector Mount Bracket)
rrFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after
switching on the power. It is recommended that the images are projected continuously for at least 30 minutes before the focus
is adjusted.
rrWhen using the projector in the elevation of below 1 400 m (4 593'), make sure [HIGH ALTITUDE MODE]
is set to [OFF].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rrWhen using the projector in the elevation of above 1 400 m (4 593') and below 2 000 m (6 562'), make
sure [HIGH ALTITUDE MODE] is set to [HIGH1].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rrWhen using the projector in the elevation of above 2 000 m (6 562') and below 2 700 m (8 858'), make
sure [HIGH ALTITUDE MODE] is set to [HIGH2].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rrDo not install the projector at elevations of 2 700 m (8 858') or higher above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rrDo not tilt the projector or place it on its side.
Do not tilt the projector body more than approximately ±40 degrees vertically or ±15 degrees horizontally. Over tilting may
result in shortening the life of the components.
Within 40°
Within 40°
14 - ENGLISH
Within 15°
Within 15°
Chapter 1 Preparation - Precautions for use
rrCautions when setting the projectors
ff If you want to use the projector other than the way of setting on the desk/floor with the adjustable feet or mounting on the
ceiling, use the three screw holes for ceiling mounting (as shown below) to fix the projector.
(Screw: M4; Depth of the screw hole: 8 mm (5/16”); Torque: M4 1.25 ± 0.2 N·m)
In addition, always keep a gap of more than 20 mm (25/32”) between the bottom of the projector and installation surface.
Make sure that there is no clearance of at least 20 mm (25/32″) between the screw holes for ceiling mounting and the
installation surface by inserting supports (metallic) between them.
Installation surface
Adjustable feet
Air intake port
(bottom)
The positions of adjustable feet and the
screw holes for ceiling mounting
Screw holes for ceiling mounting (M4)
Over 20 mm
(25/32”)
ff Make sure the air flow into the air intake
port (bottom), failure to do so may cause the
projector cannot work.
ff Do not stack the projectors.
ff Do not use the projector supporting it by the top.
ff Do not block the ventilation ports (intake and exhaust) of the projector.
ff Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and exhaust) of
the projector.
500 mm (19-11/16")
or longer
1 000 mm (39-3/8")
or longer
7 mm (9/32")
or longer
500 mm (19-11/16")
or longer
200 mm (7-7/8")
or longer
ff Do not install the projector in a confined space.
When placing the projector in a confined space, a ventilation and/or air conditioning system is required. Exhaust heat may
accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
Security
Take safety measures against following incidents.
ff Personal information being leaked via this product.
ff Unauthorized operation of this product by a malicious third party.
ff Interfering or stopping of this product by a malicious third party.
Security instruction (x pages 76, 93)
ff Make your password as difficult to guess as possible.
ff Change your password periodically.
ff Panasonic or its affiliate company never inquires a password directly to a customer. Do not tell your password in case you
receive such an inquiry.
ff The connecting network must be secured by firewall or others.
ff Set a password for web control and restrict the users who can log in.
ENGLISH - 15
Chapter 1 Preparation - Precautions for use
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of
disposal.
Cautions on use
rrTo get a good picture quality
ff In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over
windows and turn off any lights near the screen to prevent outside light or light from indoor lamp from shining onto the
screen.
rrDo not touch the surface of the projector lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto
the screen.
Attach the supplied lens cap to the projection lens when you do not use the projector.
rrLCD panel
The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that
such phenomena do not indicate malfunction. If still images are projected for a long time, a residual image may remain on the
LCD panel. Note that the residual image may not disappear.
rrOptical parts
When the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc. is present,
the replacement cycle of the LCD panel, polarizing plate and other optical parts may be shorter even if used for less than one
year. Consult your dealer for details.
rrLamp
The luminous source of the projector is a mercury lamp with high internal pressure.
A high-pressure mercury lamp has the following characteristics.
ff The luminance of the lamp will decrease by duration of usage.
ff The lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or degradation due to
cumulative runtime.
ff The life of the lamp varies greatly depending on individual specificities and usage conditions. In particular, continuous use
over 12 hours and frequent switching off/on of the power greatly deteriorate the lamp and affect the lamp life.
ff In rare cases, the lamp burst shortly after the projection.
ff The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the lamp unit
consistently. (“When to replace the lamp unit” (x page 101), “Replacing the Lamp unit” (x page 101))
ff If the lamp bursts, gas contained inside of the lamp is released in a form of smoke.
ff It is recommended to store replacement lamp for contingency.
rrComputer and external device connections
ff When connecting a computer or an external device, read this manual carefully regarding the use of power cords and
shielded cables as well.
16 - ENGLISH
Chapter 1 Preparation - Precautions for use
Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.
Wireless remote control unit <1>
(N2QAYA000071) (N2QAYA000070)
PT-VW350
Power cord
(TXFSX02UXRZ)
CD-ROM <1>
(TXFQB02WYKZ)
PT-VX420
AAA/R03 or AAA/LR03 battery <2>
(for remote control unit)
(TXFSX02UYAZ)
String <1>
(for lens cap)
(6103504711)
(TXFSX02UFEZ)
Lens cap <1>
(TKKL5568)
RGB signal cable <1>
(K1HY15YY0012)
Attention
ff After unpacking the projector, discard the power cord cap and packaging material properly.
ff Do not use the supplied power cord for devices other than this projector.
ff For lost accessories, consult your dealer.
ff Store small parts in an appropriate manner, and keep them away from young children.
Note
ff The type and number of the power cord depend on the country in which you purchased the product.
ff The model numbers of accessories are subject to change without prior notice.
ff The supplied string is used for lens cap, refer to “Attaching the Lens Cap” (x page 24).
ENGLISH - 17
Chapter 1 Preparation - Precautions for use
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follow.
Operating Instructions – Functional Manual
Operating Instructions – Multi Projector Monitoring & Control Software
Operating Instructions – Logo Transfer Software
Instruction / list (PDF)
List of compatible projector models
Software license
This is a list of projectors that are compatible
with the software contained in the CD-ROM and
their restrictions.
The open source software licenses that used in
this projector are included in the PDF files.
Multi Projector Monitoring & Control This software allows you to monitor and control
multiple projectors connected to the LAN.
Software (Windows)
Software
Logo Transfer Software (Windows)
This software allows you to transfer original
images, such as company logos to be displayed
when projection starts, to the projector.
Optional accessories
Options
Ceiling Mount Bracket
Replacement Lamp Unit
Replacement Filter Unit
Model No.
ET-PKL100H (for high ceilings)
ET-PKL100S (for low ceilings)
ET-PKV400B (Projector Mount Bracket)
ET-LAV300
ET-RFV300
Note
ff The model numbers of optional accessories are subject to change without prior notice.
18 - ENGLISH
Chapter 1 Preparation - About your projector
About your projector
Remote control
20
19
1 Power  button
Turn the projector on or off. (x pages 36, 39)
(v standby / b power on)
2 Input Selection Buttons: ,
, , 

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2015:04:16 18:31:09+08:00
Create Date                     : 2015:04:16 18:30:59+08:00
Metadata Date                   : 2015:04:16 18:31:09+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Format                          : application/pdf
Document ID                     : uuid:b4b03d28-761a-4ffb-81df-889cde2bd0c1
Instance ID                     : uuid:22020b07-f411-4d63-9bc3-178ce441c229
Producer                        : Adobe PDF Library 9.9
Page Count                      : 20
Creator                         : Adobe InDesign CS5.5 (7.5)

EXIF Metadata provided by EXIF.tools