Panasonic of North America SC-NE1 Wireless Speaker System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1877195
Application ID	gZCY9ZS9epMaJjpNhEZc2g==
Document Description	Short Term Confidentiality_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	225.64kB (2820547 bits)
Date Submitted	2013-01-10 00:00:00
Date Available	2013-02-24 00:00:00
Creation Date	2012-12-19 16:44:13
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2013-01-11 11:01:15
Document Title	untitled

1 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Owner’s Manual
Wireless Speaker System
ESPAÑOL
Model No. SC-NE1
ENGLISH
SC-NE1_PPC~VQT4T91.book
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future
use.
If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Canada: 1-800-561-5505
Register online at www.panasonic.com/register (U.S. customers only)
Included Installation Instructions (l 2, 3 and 10, 11)
The installation work should be done by a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating
instructions to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
La referencia rápida en español se puede encontrar en la página 13.
P PC
VQT4T91
until
2013/1/17
SC-NE1_PPC~VQT4T91.book
2 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
Read these instructions.
Keep these instructions.
DO NOT INGEST BATTERY,
Heed all warnings.
CHEMICAL BURN HAZARD
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
This product contains a coin/button cell battery. If the coin/
Do not block any ventilation openings. Install in
button cell battery is swallowed, it can cause severe
accordance with the manufacturer’s instructions.
internal burns in just 2 hours and can lead to death.
Do not install near any heat sources such as radiators,
Keep new and used batteries away from children. If the
heat registers, stoves, or other apparatus (including
battery compartment does not close securely, stop using
amplifiers) that produce heat.
the product and keep it away from children.
Do not defeat the safety purpose of the polarized or
If you think batteries might have been swallowed or placed
grounding-type plug. A polarized plug has two blades with
inside any part of the body, seek immediate medical attention.
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
If any electrolyte should come into contact with your hands
third prong are provided for your safety. If the provided
or clothes, wash it off thoroughly with water.
plug does not fit into your outlet, consult an electrician for
If any electrolyte should come into contact with your eyes,
replacement of the obsolete outlet.
never rub the eyes. Rinse eyes thoroughly with water, and
10 Protect the power cord from being walked on or pinched
then consult a doctor.
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11 Only use attachments/accessories specified by the
This product contains a CR Coin Cell Lithium Battery which
manufacturer.
contains Perchlorate Material s special handling may apply.
12 Use only with the cart, stand, tripod,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
CAUTION
caution when moving the cart/apparatus
Unit
combination to avoid injury from
≥ Do not place sources of naked flames, such as lighted
tip-over.
candles, on this unit.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
Placement
14 Refer all servicing to qualified service personnel. Servicing
≥ To reduce the risk of fire, electric shock or product damage,
is required when the apparatus has been damaged in any
– Do not install or place this unit in a bookcase, built-in
way, such as power-supply cord or plug is damaged, liquid
cabinet or in another confined space. Ensure this unit is
has been spilled or objects have fallen into the apparatus,
well ventilated.
the apparatus has been exposed to rain or moisture, does
– Do not obstruct this unit’s ventilation openings with
not operate normally, or has been dropped.
newspapers, tablecloths, curtains, and similar items.
WARNING
Unit
≥ To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases, on
this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
AC power supply cord
≥ The power plug is the disconnecting device.
Install this unit so that the power plug can be unplugged from
the socket outlet immediately.
Button-type battery (Lithium battery)
≥ Risk of fire, explosion and burns. Do not disassemble, heat
above 60 oC (140 oF) or incinerate.
VQT4T91
Button-type battery (Lithium battery)
≥ Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
≥ Keep out of reach of children.
≥ Insert with poles aligned.
≥ Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
– Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark
place.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
– Do not touch the terminals (i and j) with metal objects.
– Do not recharge, disassemble, remodel, heat or throw into fire.
≥ When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
SC-NE1_PPC~VQT4T91.book
3 ページ ２０１２年１２月１９日
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Product Identification Marking is located on the bottom of
the unit.
-If you see this symbolInformation on Disposal in other Countries
outside the European Union
This symbol is only valid in the
European Union.
If you wish to discard this
product, please contact your local
authorities or dealer and ask for
the correct method of disposal.
水曜日
午後４時４３分
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ............ 2
Accessories ....................................................... 4
About Bluetooth® .............................................. 4
Control reference guide.................................... 5
Connections ...................................................... 6
Bluetooth® operations ...................................... 7
Sound adjustment............................................. 8
Others................................................................. 8
Troubleshooting ................................................ 9
Attaching the unit to a wall (optional) ........... 10
Specifications.................................................. 12
Unit care........................................................... 12
License............................................................. 12
Spanish Quick Reference /
Referencia rápida en español ........................ 13
Limited Warranty (ONLY FOR U.S.A. AND
PUERTO RICO) ................................................ 14
Limited Warranty (ONLY FOR CANADA)....... 15
About descriptions in this Owner’s Manual
≥ Pages to be referred to are indicated as “l OO”.
≥ Unless otherwise indicated, operations are
described using the remote control.
VQT4T91
SC-NE1_PPC~VQT4T91.book
4 ページ ２０１２年１２月１９日
Accessories
Check the supplied accessories before using this
unit.
∏ 1 Remote control (with a battery)
(N2QAYC000091)
∏ 1 AC power supply cord
(K2CB2CB00022)
Wall mounting accessories
∏ 1 Screw
(XTB3+8JFJK-J)
∏ 1 Safety holder
(RGQ0660-K)
∏ 2 Wall mount brackets
(RMQX1082-S)
水曜日
午後４時４３分
About Bluetooth®
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
∫ Frequency band used
≥ This unit uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency restrictions
and has received certification based on
frequency laws. Thus, a wireless permit is not
necessary.
≥ The actions below are punishable by law in some
countries:
– Taking apart or modifying the unit.
– Removing specification indications.
∫ Restrictions of use
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the
English display on the top of the unit.
≥ Do not use AC power supply cord with other equipment.
≥ Product numbers provided in this Owner’s Manual are
correct as of December 2012. These may be subject to
change.
≥ Wireless transmission and/or usage with all
Bluetooth® equipped devices is not guaranteed.
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings of a
device, it can fail to connect or some operations
can be different.
≥ This system supports Bluetooth® security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data wirelessly to
this system with caution.
≥ This system cannot transmit data to a Bluetooth®
device.
∫ Range of use
≥ Use this device at a maximum range of 10 m
(33 ft). The range can decrease depending on
the environment, obstacles or interference.
∫ Interference from other devices
≥ This unit may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this unit is located too
close to other Bluetooth® devices or the devices
that use the 2.4 GHz band.
≥ This unit may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.
∫ Intended usage
VQT4T91
≥ This unit is for normal, general use only.
≥ Do not use this system near an equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc).
SC-NE1_PPC~VQT4T91.book
5 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Control reference guide
− VOLUME ＋
SOUND
SETUP
1 4 9
10 11

Standby/on switch [Í/I] ([Í])
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small amount
of power.
Enter sound menu
Enter setup menu
Select Bluetooth®/AUX
Adjust the volume (0 (min) to 50 (max))
Enter the Bluetooth® menu/
Change the sound input level of the external
device (l 6)
Mute the sound
PLAY MENU
ENGLISH
Top view
OK

∫ Before using for the first time
Remove the insulation sheet A .
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
Mutes the sound. Press again to cancel.
“MUTE” is also canceled when the volume is adjusted or the
unit is turned off.
10
11
Selection/OK
Dynamic Bass sound effect selector
Display
Remote control signal sensor
Distance: Within approx. 7 m (23 ft) directly in front.
≥ To avoid interference, please do not put any objects in
front of signal sensor.
≥ Set the button-type battery with its (i) mark
facing upward.
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
VQT4T91
SC-NE1_PPC~VQT4T91.book
6 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Connections
モヤチリワ
Connect the AC power supply cord.
This unit consumes a small amount of AC power (l 12) even when turned off.
≥ In the interest of power conservation, if you will not be using this unit for an extended period of
time, unplug it from the household AC outlet.
To a household AC outlet
AC Power supply cord (supplied)
≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily
influenced by magnetism.
Additional Connection
モヤチリワ
Connect an external music device (for AUX mode).
1 Plug the audio cable (not supplied) into the AUX jack.
Plug type: ‰3.5 mm (1/8q) stereo
2 Press [ , AUX] to select “AUX” and start playback on
the connected device.
Audio cable (not supplied)
∫ To select the sound input level of the external device
1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK].
2 Press [3, 4] to select “NORMAL” or “HIGH”.
≥ The default setting is “NORMAL”.
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the instruction manual of the other equipment.
≥ The cables and the devices are not supplied.
VQT4T91
SC-NE1_PPC~VQT4T91.book
7 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this
unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth® device for details.
Pairing Bluetooth® devices
Press [
, AUX] to select “BLUETOOTH”.
≥ If “PAIRING” is indicated on the display, go to step 3.
Press [PLAY MENU] to select “NEW DEV.” and
then press [OK].
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
≥ Press [ , AUX] to select “BLUETOOTH”.
≥ If a Bluetooth® device is already connected,
disconnect it.
{. “PAIRING” is indicated on the display.
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
Press [3, 4] to select the mode and then
press [OK].
Select “SC-NE1” from the Bluetooth device’s
®
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Bluetooth menu.
®
ENGLISH
Preparation
≥ Turn on the Bluetooth® feature of the device and
place the device near this unit.
≥ If this unit is already connected to a Bluetooth®
device, disconnect it.
Bluetooth® transmission mode
Start play on the Bluetooth® device.
≥ The default setting is “MODE 1”.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
Connecting a paired Bluetooth®
device
Preparation
≥ Turn on the Bluetooth® feature of the device and
place the device near this unit.
≥ If this unit is already connected to a Bluetooth®
device, disconnect it.
Press [
If the sound input level of the Bluetooth® transmission
is too low, change the input level setting.
Preparation
≥ Connect a Bluetooth® device.
Press [PLAY MENU] repeatedly to select
“INPUT LEVEL”.
Press [3, 4] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL +1” ,. “LEVEL +2”
^----------------------------------------------------J
, AUX] to select “BLUETOOTH”.
{. “READY” is indicated on the display.
Select “SC-NE1” from the Bluetooth® device’s
Bluetooth® menu.
Bluetooth® input level
{. The name of the connected device is indicated on the
display for 2 seconds.
≥ Select “LEVEL 0” if the sound is distorted.
≥ The default setting is “LEVEL 0”.
Disconnecting a Bluetooth®
device
Start play on the Bluetooth® device.
≥ This unit can only be connected to one device at a time.
≥ When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth® device.
≥ The Bluetooth® device will be disconnected if “AUX” is
selected as an audio source.
While a Bluetooth® device is connected:
Press [PLAY MENU] to select
“DISCONNECT?”.
Press [3, 4] to select “OK? YES” and then
press [OK].
VQT4T91
SC-NE1_PPC~VQT4T91.book
8 ページ ２０１２年１２月１９日
Sound adjustment
The following sound effects can be added to the
audio output.
Press [SOUND] repeatedly to select the effect.
Press [3, 4] to select the setting and then
press [OK].
Direct-Vocal
Surround
(D.SURROUND)
Preset EQ
(PRESET EQ)
水曜日
午後４時４３分
Display brightness
The brightness of this unit’s display can be
changed.
Press [SETUP] repeatedly to select “DIMMER”.
Press [3, 4] to select “ON” and then press
[OK].
“LEVEL 1”, “LEVEL 2” or
“OFF”.
≥ The factory preset is “OFF”.
“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥ The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (j4 to i4).
Dynamic Bass*
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
≥ The factory preset is
“ON D.BASS”.
* This function can also be selected with the [D.BASS] button
on the unit.
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
≥ To cancel the dimmer, select “OFF” in step 2.
Automatic standby
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for approx. 30 minutes.
To cancel this function
Press [SETUP] repeatedly to select
“AUTO OFF”.
Press [3, 4] to select “OFF” and then press
[OK].
≥ To turn automatic standby on, select “ON” in step 2.
Changing the unit and remote
control code
Others
The sleep timer can turn the unit off after a set time.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
Sleep timer
Press [SETUP] to select “SLEEP”.
Press [3, 4] to set the time (in minutes) and
, AUX] to select “AUX”.
While pressing and holding [
/ AUX] on the
unit, press and hold [SOUND] on the remote
then press [OK].
control until the unit’s display shows
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^--------------------. “OFF” (Cancel) (--------------------J
≥ The remaining time is indicated on the unit’s display
except when other operations are performed.
Press [
“REMOTE 2”.
Press and hold [OK] and [SOUND] on the
remote control for at least 4 seconds.
≥ To change the mode back to “REMOTE 1”, repeat the steps
above but replace the button pressed on the remote control
from [SOUND] to [ , AUX].
VQT4T91
SC-NE1_PPC~VQT4T91.book
9 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Troubleshooting
To return all settings to the factory preset
When the following situations occur, reset the
memory:
≥ There is no response when buttons are pressed.
≥ You want to clear and reset the memory contents.
1 Disconnect the AC power supply cord. (Wait
for at least 3 minutes before proceeding to
step 2.)
2 While pressing and holding down [Í/I] on the
unit, reconnect the AC power supply cord.
≥ Keep holding down [Í/I] until “--------”
appears on the display.
3 Release [Í/I].
≥ All the settings are returned to the factory preset. You will
need to reset the memory items.
Common problems
Humming heard during play.
≥ An AC power supply cord or fluorescent light is near the
cords. Keep other appliances and cords away from this unit’s
cables.
Bluetooth®
Remote control
The remote control doesn't work properly.
≥ The remote control and this unit are using a different code.
(l below, “REMOTE ”)
≥ Is the battery depleted or is the battery inserted incorrectly?
(l 5)
ENGLISH
Before requesting service, make the following
checks. If you are in doubt about some of the check
points, or if the solutions indicated in the following
guide do not solve the problem, refer to “Customer
Services Directory (United States and Puerto Rico)”
on page 14 if you reside in the U.S.A. or Puerto
Rico, or refer to “Limited Warranty (ONLY FOR
CANADA)” on page 15 if you reside in Canada.
Messages
The following messages or service numbers
may appear on the unit's display.
“AUTO OFF”
≥ The unit has been left unused for about 30 minutes and will
shut down within a minute. Press any button to cancel it.
“DIMMER”
≥ Appears 10 seconds after the volume is turned to “0”.
“ERROR”
≥ Incorrect operation is performed. Read the instructions and
try again.
“F ” (“  ” stands for a number.)
≥ There is a problem with this unit.
Note down the displayed number, disconnect the AC power
supply cord and consult your dealer.
“REMOTE ” (“  ” stands for a number.)
≥ The remote control and this unit are using different codes.
Change the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] and
[ , AUX] for more than 4 seconds.
– When “REMOTE 2” is displayed, press and hold [OK] and
[SOUND] for more than 4 seconds.
Pairing cannot be done.
≥ Check the Bluetooth® device condition.
The device cannot be connected.
≥ The pairing of the device was unsuccessful or the registration
has been replaced. Try pairing the device again.
≥ This unit might be connected to a different device.
Disconnect the other device and try pairing the device again.
The device is connected but audio cannot be
heard through this unit.
≥ For some built-in Bluetooth® devices, you have to set the
audio output to “SC-NE1” manually. Read the operating
instructions for the device for details.
The sound is interrupted.
≥ The device is out of the 10 m (33 ft) communication range.
Bring the Bluetooth® device closer to this unit.
≥ Remove any obstacle between this unit and the device.
≥ Other devices that use the 2.4 GHz frequency band (wireless
router, microwaves, cordless phones, etc.) are interfering.
Bring the Bluetooth® device closer to this unit and distance it
from the other devices.
≥ Select “MODE 1” for stable communication. (l 7).
VQT4T91
SC-NE1_PPC~VQT4T91.book
10 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Attaching the unit to a wall (optional)
This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used
and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).
The screws and other items are not supplied as the type and size will vary with each installation.
≥ Refer to step 2 of “Wall mount instructions” for details about the required screws.
≥ Be sure to attach the fall prevention cord as a secondary safety measure.
Installation accessories
∫ Supplied accessories
≥ 1 Safety holder
≥ 1 Screw
≥ 2 Wall mount brackets
∫ Additionally required accessories
(commercially available)
≥ 4 Wall mount bracket fixing screws
≥ 1 Safety holder fixing screw
≥ 1 Fall prevention cord*
≥ 1 Screw eye
Wall mount instructions
Before installation, turn the unit off and disconnect the
AC power supply cord from the AC outlet.
Measure and mark the position of the wall
mount brackets (Both sides).
{. Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
12.5 mm (1/2q)
* Use a cord that is capable of supporting over 33 kg (72.8 lbs)
(with a diameter of about 1.5 mm (1/16q)).
≥ Keep the safety holder out of reach of children to
prevent swallowing.
≥ Keep the screws out of reach of children to prevent
swallowing.
≥ Keep the wall mount brackets out of reach of children
to prevent swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
≥ Be sure to install this unit as indicated
within this Owner’s Manual.
252 mm (9 29/32q)
Space required
82 mm (3 7/32q)
300 mm (11 13/16q)
67 mm (2 5/8q)
83 mm
(3 9/32q)
122 mm
(4 13/16q)
169 mm
(6 21/32q)
252 mm (9 29/32q)
319 mm (12 9/16q)
570 mm (22 7/16q)
770 mm (30 5/16q)
10
VQT4T91
SC-NE1_PPC~VQT4T91.book
11 ページ ２０１２年１２月１９日
Attach the wall mount bracket to the wall with
水曜日
午後４時４３分
Hook the unit securely onto the wall mount
2 screws (not supplied). (Both sides)
brackets with both hands.
≥ Use a level to ensure both wall mount brackets are
level.
≥ Connect the AC power supply cord to the unit before
hanging the unit onto the wall. (l 6)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
At least 30 mm (1 3/16q)
‰4 mm
(5/32q)
ENGLISH
‰7.5 mm (19/64q) to
‰9.4 mm (3/8q)
Wall
Wall mount bracket
Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to
70 N0cm (0.5 lbf0ft).
Screw
(supplied)
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Refer to step 2 for requirements before screwing.
Safety holder
Attach the fall prevention cord (not supplied) to
this unit.
Cord
(not supplied)
Fixed to the wall
Safety holder fixing screw
(not supplied)
Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Cord (not supplied)
Wall
11
VQT4T91
SC-NE1_PPC~VQT4T91.book
12 ページ ２０１２年１２月１９日
午後４時４３分
Specifications
Unit care
∫ GENERAL
Pull out the AC power plug from the outlet before
maintenance.
Power consumption
11 W
Power consumption in standby mode
Approx. 0.1 W
Power supply
AC 120 V, 60 Hz
Dimensions (WkHkD)
570 mmk206 mmk100 mm
(22 7/16qk8 1/8qk3 15/16q)
Mass (Weight)
Approx. 2.7 kg (5.95 lbs)
Operating temperature range
0 oC to r40 oC (r32 oF to r104 oF)
Operating humidity range
35 % to 80 % RH (no condensation)
∫ AMPLIFIER SECTION
RMS Output Power Stereo mode
Front Ch (both ch driven)
20 W per channel (6 ≠),
1 kHz, 10 % THD
Total RMS Stereo mode power
40 W
FTC Output Power Stereo mode
Front Ch (both ch driven)
15 W per channel (6 ≠),
20 Hz to 20 kHz, 1 % THD
Total FTC Stereo mode power
30 W
∫ SPEAKER SECTION
Type
2 way, 2 speaker system (Bass reflex)
Speaker unit(s)
1. Woofer
8 cm (3 1/8q)k1 per channel
2. Tweeter
2.5 cm (1q)k1 per channel
Impedance
6≠
Output sound pressure
83.5 dB/W (1 m (3.3 ft))
Frequency range
52 Hz to 25 kHz (s16 dB),
75 Hz to 22 kHz (s10 dB)
∫ BLUETOOTH SECTION
Version
Bluetooth® Ver.2.1 +EDR
Output
Class 2 (2.5 mW)
Communication distance
About 10 m (33 ft)*
Communication method
2.4 GHz band FH-SS
Correspondence profile
A2DP
* Prospective communication distance
Measurement environment:
Temperature 25 oC (77 oF) / Height 1 m (3.3 ft)
Measure in “MODE 1”
∫ TERMINALS SECTION
AUX Terminal
12
水曜日
Stereo, ‰3.5 mm (1/8q) jack
≥ Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital spectrum
analyzer.
VQT4T91
∫ Clean this unit with a soft, dry cloth
≥ When dirt is heavy, wring a cloth moistened in
water tightly to wipe the dirt, and then wipe it with
a dry cloth.
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory presets to delete the user
settings. (l 9, “To return all settings to the factory
preset”)
≥ The operation history may be recorded in the
memory of this unit.
License
The Bluetooth® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. Other trademarks
and trade names are those of their respective owners.
SC-NE1_PPC~VQT4T91.book
13 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Spanish Quick Reference / Referencia rápida en español
Conexiones
Operaciones Bluetooth®
Dispositivos Bluetooth® de
sincronización
Conecte el cable de alimentación de CA.
Esta unidad consume poca corriente CA incluso
cuando se encuentra apagada.
≥ Para ahorrar energía, si no va a usar esta unidad
durante un período prolongado de tiempo, puede
desconectarla.
≥ Consumo de energía en Standby (modo de espera):
Aprox. 0,1 W
A la toma doméstica de CA
Cable de suministro de energía CA (suministrado)
Preparación
≥ Encienda la función Bluetooth® del dispositivo y
coloque el dispositivo cerca de este aparato.
≥ Si este aparato ya está conectado a un dispositivo
Bluetooth®, desconéctelo.
Pulse [
, AUX] para seleccionar “BLUETOOTH”.
≥ Si se indica “PAIRING” en la pantalla, vaya al paso 3.
Presione [PLAY MENU] para seleccionar
“NEW DEV.” y luego presione [OK].
{. “PAIRING” se indica en la pantalla.
Seleccione “SC-NE1” desde el menú Bluetooth®
del dispositivo Bluetooth®.
ESPAÑOL
モヤチリワ
ENGLISH
Al usar la conexión Bluetooth®, puede escuchar el
sonido desde el dispositivo de audio Bluetooth® desde
este aparato, de forma inalámbrica.
≥ Consulte las instrucciones de funcionamiento del
dispositivo Bluetooth® para obtener más detalles.
Inicie la reproducción en el dispositivo Bluetooth®.
Conexión Adicional
≥ Si se le solicita la contraseña, ingrese “0000”.
≥ Puede registrar hasta 8 dispositivos con este aparato. Si se
sincroniza un 9no dispositivo, se reemplazará el dispositivo
que no se usó por más tiempo.
Conexión de un dispositivo
Bluetooth® sincronizado
モヤチリワ
Conecte un dispositivo externo de
música (para el modo AUX).
1 Enchufe el cable de audio (no suministrado)
en el AUX conector.
≥ Tipo de enchufe: ‰3,5 mm (1/8q) estéreo
2 Presione [ , AUX] topara seleccionar “AUX” y
comenzar a reproducir en el dispositivo conectado.
≥ Desconecte el ecualizador o baje el volumen de
sonido del dispositivo externo para reducir la señal
de entrada. Un nivel alto de la señal de entrada
distorsionará el sonido.
≥ Para mayores detalles, consulte el manual de
instrucciones del otro equipo.
≥ No se proporcionan cables ni dispositivos.
Cable de audio (no suministrado)
Preparación
≥ Encienda la función Bluetooth® del dispositivo y
coloque el dispositivo cerca de este aparato.
≥ Si este aparato ya está conectado a un dispositivo
Bluetooth®, desconéctelo.
, AUX] para seleccionar “BLUETOOTH”.
{. “READY” se indica en la pantalla.
Seleccione “SC-NE1” desde el menú Bluetooth®
del dispositivo Bluetooth®.
{. El nombre del dispositivo conectado se indica en la
pantalla durante 2 segundos.
Inicie la reproducción en el dispositivo Bluetooth®.
≥ Esta unidad se puede conectar solamente a un dispositivo por vez.
≥ Cuando se selecciona “BLUETOOTH” como fuente, este
aparato intentará conectarse automáticamente con el último
dispositivo conectado Bluetooth®.
≥ El dispositivo Bluetooth® se desconectará si se selecciona
“AUX” como fuente de audio.
Desconexión del dispositivo
Bluetooth®
∫ Para seleccionar el nivel de entrada de
sonido del dispositivo externo
1 Mientras está en modalidad “AUX”, pulse
[PLAY MENU] repetidamente para seleccionar
“INPUT LEVEL” y luego pulse [OK].
2 Presione [3, 4] para seleccionar “NORMAL” o
“HIGH”.
Pulse [
Mientras se conecta un dispositivo Bluetooth®:
Pulse [PLAY MENU] para seleccionar
“DISCONNECT?”.
Presione [3, 4] para seleccionar “OK? YES” y
luego presione [OK].
13
VQT4T91
SC-NE1_PPC~VQT4T91.book
14 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on
the chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or refurbished
parts, (b) replace it with a new or a refurbished equivalent value product, or (c)
refund your purchase price. The decision to repair, replace or refund will be
made by the warrantor.
Product or Part Name
Parts
Labor
Wireless Speaker System
1 Year
1 Year
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
Not Applicable
Only Non-Rechargeable Batteries
10 Days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During
the “Parts” warranty period, there will be no charge for parts. This Limited
Warranty excludes both parts and labor for non-rechargeable batteries,
antennas, and cosmetic parts (cabinet). This warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold
“as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair.
When shipping the unit, carefully pack, include all supplied accessories listed
in the Owner’s Manual, and send it prepaid, adequately insured and packed
well in a carton box. When shipping Lithium Ion batteries please visit our Web
Site at www.panasonic.com/BatteryHandling as Panasonic is committed to
providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you
can be reached. A valid registered receipt is required under the Limited
Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT
PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED
FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF
OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred
in shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation,
set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction
of sand, humidity or liquids, commercial use such as hotel, office, restaurant,
or other business or rental use of the product, or service by anyone other than
a Factory Service Center or other Authorized Servicer, or damage that is
attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or Service
Center. If the problem is not handled to your satisfaction, then write to the
warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of October 2012
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
14
MODEL NUMBER
SERIAL NUMBER
VQT4T91
SC-NE1
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
SC-NE1_PPC~VQT4T91.book
15 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and
for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Panasonic Portable / Clock Radio (without Tape, CD, MD)
Panasonic Audio Product
Panasonic DVD Product
Accessories including rechargeable batteries
ENGLISH
EXCHANGE PROGRAM
One (1) year
One (1) year
One (1) year
Ninety (90) days
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada,
which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear
and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures
which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer
controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or
liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by
anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is
not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives
you specific legal rights and you may have other rights which vary depending on your province or territory.
CONTACT INFORMATION
For product information and operation assistance, please contact:
Our Customer Care Centre:
Telephone #:
Fax #:
Email link:
1-800-561-5505
(905) 238-2360
“Support # contact us # email” on www.panasonic.ca
For defective product exchange within the warranty period, please contact the original dealer or our Customer Care
Centre.
15
VQT4T91
SC-NE1_PPC~VQT4T91.book
16 ページ ２０１２年１２月１９日
水曜日
午後４時４３分
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way,
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of
North America
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device.
FCC ID: ACJ-SC-NE1
IC: 216A-SCNE1
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least
20 cm (7 7/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Panasonic Consumer Marketing
Company of North America,
Division of Panasonic Corporation of
North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C Panasonic Corporation 2012
Printed in Malaysia
Panasonic Canada Inc.
pr
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
VQT4T91
F1212BM0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2012:12:19 16:44:13+09:00
Modify Date                     : 2013:01:11 11:01:15+09:00
Metadata Date                   : 2013:01:11 11:01:15+09:00
Trapped                         : False
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Format                          : application/pdf
Title                           : untitled
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Document ID                     : uuid:0aabcb32-aa54-4cf1-9600-adfc086f9484
Instance ID                     : uuid:47536bf6-02bf-497e-afc9-9f009434acd5
Page Count                      : 16

EXIF Metadata provided by EXIF.tools