Panasonic DP 1810P P01 03 User Manual To The 21b07b0f E073 477b 8bf1 A86b8da7d3ba

User Manual: Panasonic DP-1810P to the manual

Open the PDF directly: View PDF .
Page Count: 60

Download
Open PDF In Browser	View PDF

Operating Instructions

DP-1810P
with Options

(For Copier)
DP-2010E
with Options

DP-1810P/2010E

Getting To Know Your
Machine
Options

Making Copies

Model No.

Before Starting

Digital Imaging Systems

Before operating this equipment, please read these instructions completely and keep these operating
instructions for future reference.

English

Others

J
?
I

IMPORTANT INFORMATION
When requesting information, supplies or service always refer to the model and serial number of your
machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine.
For your convenience, space is provided below to record information you may need in the future.
Model No.

Serial No.

Date of Purchase

Dealer

Address

Telephone Number
(
)
Supplies Telephone Number
(
)
Service Telephone Number
(
)

(Digital copier with ADF option)

Model and Serial Number
Copyright  2002 by Matsushita Graphic Communication Systems, Inc.
All rights reserved. Unauthorized copying and distribution is a violation of law. Printed in Japan.
The contents of these Operating Instructions are subject to change without notice.

Getting To Know Your
Machine

Operation Chart
Common Features and Usage
■ Basic Operation
Original

Load Paper
Turn the Power
Switch On

Place the
Original

3 4 5

Original Size
(Reduction/
Enlargement
Only)

Copy Size
Number
(Reduction/ of Copies
Enlargement
Only)

Press
START

■ Position of the Original
From ADF (or i-ADF)

From Platen
Original Guide
INV

INV

Original Guides
Adjust to the original’s width

INV
LTR
LGL

LTR
LDR

LETTER

ADF Tray

LEGAL

LGL

LDR

LEDGER

LTR

LETTER R

INVOICE R

INVOICE

INV

C Place originals face down on the
platen or face up on the ADF.
C If the original is not positioned
properly, a portion of the original
may not be copied.
C For originals smaller than invoice
size, position the original within the
area of INVOICE and select invoice.

■ Commonly Used Functions and Operating Procedures
Full Size
Makes a copy that is the same
size as the original

Reduction or Enlargement
Copies the original at a fixed
reduction or enlargement ratio

1 4 5
1 2 3 4 5
(See page 12)

(See page 13)

■ Memory Capacity
When the memory becomes full during original scanning, the message “OUT OF MEMORY”
“CONTINUE? 1: YES 2: NO” will be displayed in the message display. In this case, follow the
operating instruction in the message display.
When additional memory is required, consult with an authorized servicing dealer.

Energy Star

As an ENERGY STAR® Partner, Panasonic has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage standards. This
product will automatically “power down” after a specified period of non-use. The use of this
ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit the
environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.

Table of Contents

Table of Contents
Getting To Know Your Machine
Operation Chart .............................................................................................................................. 3
■ Common Features and Usage .............................................................. 3
Energy Star ..................................................................................................................................... 4

Before Starting
Precautions ..................................................................................................................................... 7
■ For Your Safety ..................................................................................... 8
■ Handling ............................................................................................... 8
■ Toner and Paper ................................................................................... 8
■ Ventilation ............................................................................................. 8
■ Installation ............................................................................................ 9
Control Panel ................................................................................................................................ 10

Making Copies
Basic Copy .................................................................................................................................... 12
■ Full Size Copying ................................................................................ 12
■ Reduction or Enlargement Copying .................................................... 13
■ Zoom Copying .................................................................................... 14
■ Using the Sheet Bypass ..................................................................... 15
Creative Features ......................................................................................................................... 16
■ 2 in 1 Copy ......................................................................................... 16
■ 2 Page Copy ....................................................................................... 17
■ Book/Edge/Margin .............................................................................. 18
■ 2-Sided/1-Sided Copy ......................................................................... 19
■ 1 \ 2/2 \ 1/2 \ 2 Copy .................................................................... 20
■ Book \ 2 Copy .................................................................................. 21
■ Job Memory ....................................................................................... 22
■ Sort Copy ........................................................................................... 23
Other Features .............................................................................................................................. 24
■ Energy Saver/Interrupt Mode .............................................................. 24
■ Skyshot Mode ..................................................................................... 25
Combined Function Table ............................................................................................................ 27
Function ........................................................................................................................................ 28
■ Checking the Copier’s Total Counter ................................................... 28
■ General Functions .............................................................................. 29
■ Copier Settings ................................................................................... 30
■ General Functions for Key Operator ................................................... 31
■ Copier Settings for Key Operator ........................................................ 32
■ Function Setting .................................................................................. 33
■ Function Setting for Key Operator ....................................................... 34

Table of Contents
Options
Accessories .................................................................................................................................. 39
■ Components ....................................................................................... 39
■ Automatic Document Feeder .............................................................. 40

Problem Solving
Problem Solving ........................................................................................................................... 42
■ Adding Paper (J) ............................................................................... 42
■ Adding the Toner and Replacing Toner Waste Container (?) ............. 43
■ Removing a Misfed Paper ................................................................... 45
Troubleshooting ........................................................................................................................... 52
■ Before Calling Service ........................................................................ 52
■ User Error Codes (U Code) ................................................................ 54

Others
Specifications ............................................................................................................................... 55
Options and Supplies ................................................................................................................... 57

Precautions
For Your Safety
■ Laser Safety

Before Starting

LASER SAFETY
This unit employs a laser. Only qualified service personnel should
attempt to service this device due to possible eye injury.

CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.

■ Caution Labels

(Digital copier with ADF option)

Manufacturer’s name and address

Factory ID

Precautions
Handling
■ Do not look directly at the exposure lamp when
copying.

■ Do not turn the power switch Off or open the front
panel during copying.
C Do not drop paper clips or other metal objects into
the copier.

Toner and Paper
■ Store toner, drum and paper in cool areas with low
humidity.
C Use high quality 16 – 24 lb (60 – 90 g/m2) [Sheet
Bypass: 15 – 34 lb (56 – 128 g/m2)] paper.
C For optimum performance, it is recommended that
only Panasonic Brand supplies are used in the
copier.

Ventilation
■ The copier should be installed in a well-ventilated
area to minimize the ozone density in the air.

Precautions
Installation
■ The copier should not be installed in areas with the
following conditions:

Before Starting

C Extremely high or low temperature and humidity.
Ambient conditions
Temperature:
50 – 86°F (10 – 30°C)
Relative humidity: 30 – 80 %
C Where temperature and humidity can change
rapidly, causing condensation.
C Direct exposure to sunlight.
C Directly in the air conditioning flow.
C In areas of high dust concentration.
C In areas of poor ventilation.
C In areas with chemical fume concentration.
C In areas with extreme vibration.
C With unstable or uneven conditions (floors, etc.).

■ The maximum power consumption is 1.2 kW.
A properly wired (grounded), dedicated, 15 A, 120 VAC outlet is required.
Do not use an extension cord.
The power cord on this equipment must be used to disconnect the main power.
Please ensure that the socket outlet is installed near the equipment and is easily accessible.

FCC WARNING For U.S.A.
FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his/her own expense.
The user could lose the authority to operate this equipment if any unauthorized changes or
modifications are made to this equipment.

Control Panel

(For DP-2010E only)

No
#
$
%

2 in 1 Key
C From two 1-sided originals, side by side, to 1-sided copies.
2 Page Copy Key
C Copying two facing pages on a ledger size original on two separate
letter size sheets.
Sort Key
C When using Electric Sorting Mode. Optional memory is required.

Refer to
Page 16
Page 17
Page 23

MARGIN Key C Shifts the image to the right or left.

(

EDGE Key

C Creates a blank edge.

Page 18

)

BOOK Key

C Eliminates dark inner binding shadows.

Page 18

Photo; Text/Photo; Text Keys
C Select the type of original(s) for image density adjustment.
PHOTO
: Originals are mainly composed of photo.
TEXT/PHOTO: Combined originals with text and photo.
TEXT
: Originals are mainly composed of text.

Page 12

Exposure Keys (DARKER, LIGHTER)

Page 12

SET Key

.
/

C Set the present selection.

FUNCTION Key
C Use when changing the paper size, initial values for functions (default
values) and key operator settings.
CLEAR Key C Clears the copy count in the display.

ENERGY-SAVER Key
C Can save power while the copier is not in use.

RESET Key

NOTE

Contents

C Resets all features to the initial power-on state.

Page 18

——
Pages 28 – 37
——
Page 24
——

C The Control Panel displayed above shows only copier functions. Please refer to the
appropriate operating instructions for other control panel functions or in the Panasonic
Document Management System CD-ROM for the Printer control panel functions.
C The illustration above shows the DP-2010E control panel.

Control Panel

Before Starting

LCD Display

Warning Indications
J Add Paper
? Add Toner
I Misfeed
2 Call Service

For DP-1810E
No

Contents

Refer to

STOP Key

C Stops the copy run.

——

START Key

C Used to start an operation.

——

INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
C Interrupt Key interrupts other copy or print jobs while making copies.
C Memory In Key registers two copy jobs for recall at a later time.
C M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.

Pages 22, 24

Cursor Keys C Select copy ratio and function modes using (G or F).

——

PAPER TRAY Key

7
8

C Used to select the paper tray manually.

COPY SIZE Key
C Used to select Reduction/Enlargement only. For additional details, see page 13.
ORIGINAL SIZE Key
C Used to select the original size manually. For additional details, see page 13.
C When selecting the Printer ON/OFF Line.

PRINT Key

2-Sided/1-Sided Copy Key
C Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying

NOTE

——
——
——
——
——

C The Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for other control panel functions or in
the Panasonic Document Management System CD-ROM for the Printer
control panel functions.

Basic Copy
Full Size Copying
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.

ORIGINAL SIZE Key CLEAR Key

2 3

Place the Original
LCD Display (Sample)

Number of Copies* Press START**
Up to 999

READY TO COPY
COPIES:001
Select the Original Size on units
without the ADF/i-ADF Option.

■ Manually Selecting Exposure Control or Original Type
# Select the Original Type
PHOTO
: Originals are mainly composed of photo.
TEXT/PHOTO: Combined originals with text and photo.
TEXT
: Originals are mainly composed of text.

$ Select Exposure Control
Press the DARKER/LIGHTER keys to adjust the exposure.

NOTE

∗ Use Clear key when canceling the copy count.
∗∗ While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Start key. The COPY JOB RESERVED
indicator displays until the warm up cycle is completed and the copy job is
automatically started.

Basic Copy
Reduction or Enlargement Copying
■ Copying with Preset Ratios

Select the
ORIGINAL SIZE

4 5

Number of
Copies

Select the COPY
SIZE

Example: Reduction
Original size

Making Copies

Place the
Original

RESET

Press
START

Copy size

LEDGER

LETTER

LDR ->LTRB [LTRB ]
ZOOM: 65% COPIES:001
The correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Original
Size
Ledger

Copy Size
Legal

Letter

Invoice

Ledger

100

Legal

121

100

Letter

129

100

Invoice

200

155

129

100

C When changing the paper tray, press the
Paper Tray key.

NOTE

C If the desired copy size is different from the paper size loaded in the paper
tray, use the sheet bypass. (See page 15)
C Press the RESET key to cancel all job settings.

Basic Copy
Zoom Copying
■ Zoom
Copies with variable zoom ratios from 50 % to 200 % in 1 % increments.

1
Place the
Original

Select ORIGINAL
SIZE
(without using
ADF/i-ADF)

Press Cursor (G or F)
keys to select Zoom Ratio

RESET

4 5
Number
of Copies

Press
START

LTR ->LTRB [LTRB ]
ZOOM:125% COPIES:001
(Example: 125 % Zoom)

ATTENTION

NOTE

C When changing the paper size after setting the zoom ratio, please use the paper tray
key.
C Press the RESET key to cancel all job settings.

Basic Copy
Using the Sheet Bypass
■ Copying on Special Paper, etc.

Place the original.
Open the sheet bypass.

Sheet
Bypass

# Place the sheets of paper into
the tray. (approximately up to
50 Letter size sheets/20 lb)

Making Copies

Pull out the sheet bypass tray
until it stops.
(For Ledger size only)

Do not fill above.
Side Guides

Insert the paper until it stops.

$ Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.

Press START.

ATTENTION
NOTE

C Do not feed curled paper through the sheet bypass to avoid misfeed.

C Adjust the side guides properly to avoid skewing, wrinkling or misfeeding.

Creative Features
2 in 1 Copy
■ 2 in 1 Copy
From two 1-Sided originals, side by side, to 1-Sided pages.

1 \ 2 (Layout)*

2 \ 1 (Layout)*

Landscape (Orientation)*
Portrait (Orientation)*

■ Procedure
ADF/i-ADF

Face-Up

1
Place the
Originals

NOTE

2
Press 2
in 1 key

(3 )
COPY SIZE
(Reduction/
Enlargement
Only)

4 5
Number of
Copies

C The ADF/i-ADF is required for 2 in 1 copy.
CPress the RESET key to cancel all job settings.
CNumbers in parenthesis “ ( ) ” represent that, an additional step is required to
activate the feature.
∗ The Orientation and Layout can be set in the Copier Settings function mode.
(See page 27)

Press
START

Creative Features
2 PAGE COPY
■ 2 PAGE Copy
Copying two facing pages on a ledger size original on two separate Letter size sheets.

Making Copies

■ Procedure

Place the Press the 2
Originals PAGE COPY
key

Platen

3
ORIGINAL SIZE
(Letter or Ledger
size Only)

4 5
Number of
Copies

Press
START

Ledger size original
Book Mark
Center book
by length
and width
according
to center
marks.

Letter

NOTE

C To reset all job settings, press the RESET key.

Creative Features
BOOK/EDGE/MARGIN
■ BOOK Key
Eliminates dark inner binding shadows when copying from a book.
■ EDGE Key
Creates a blank edge.
■ MARGIN Key
Shifts the image to the right or left.

■ Procedure

Place the
Original

Press Cursor (G or F) keys to adjust
the void width while the button is
blinking. (approx. 5 sec.)
CVoid/Margin width: 5-99 mm

Press BOOK, EDGE
or MARGIN key

Book
BOOK MARGIN
CENTER VOID = 20mm ∨∧

Edge
EQUAL RATE
VOID MARGIN = 5mm ∧

Margin**
LEFT MARGIN
10mm ∨∧

NOTE

∗

4 5

Number
of Copies

Press
START

∗

Initial Book Margin setting (Factory setting): 20 mm

∗

Initial Equal Rate setting (Factory setting): 5 mm

∗

Initial Left Margin setting (Factory setting): 10 mm

Initial setting (Factory setting) can be changed in the Copier Settings function mode.
(See page 30)
∗∗ If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 30)
CPress the RESET key to cancel all job settings.

Creative Features
2-Sided/1-Sided Copy (For DP-2010E)
■ Key Operation
Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.

1\2

From 1-Sided originals to 2-Sided
copies.

(See page 20)

2\2

From 2-Sided originals to 2-Sided
copies.

(See page 20)

From book originals to 2-Sided copies.

(See page 21)

From 2-Sided originals to 1-Sided
copies.

(See page 20)

Book \ 2

2\1

NOTE

Making Copies

2-Sided/1-Sided Copy key

C 2-Sided originals may be handled either manually or automatically using the
i-ADF (DA-AR201).
C 2-Sided/1-Sided Copy function is only available for DP-2010E.

Creative Features
1 \ 2 / 2 \ 1 / 2 \ 2 Copy (For DP-2010E)
■ 1 \ 2 Copy

■ 2 \ 1 Copy

From 1-Sided originals to
2-Sided copies.
(From Copier Platen & i-ADF/
ADF)

■ 2 \ 2 Copy

From 2-Sided originals to
1-Sided copies.
(Using i-ADF)

From 2-Sided originals to
2-Sided copies.
(Using i-ADF)

Long Edge (Binding)*

Long Edge (Binding)

Short Edge (Binding)*

Short Edge (Binding)

■ Procedure
i-ADF

Face-Up

1
Place the
Originals

2
Press 2-Sided/
1-Sided Copy key
(circulation) to
select 1 \ 2, 2 \ 2
or 2 \ 1

BINDING:LONG EDGE
PRESS < > TO SELECT

(3 )

4 5

COPY SIZE
Number of
(Reduction/
Copies
Enlargement Only)

Press
START

Press the I or H key to select
the binding location.

(When selecting 1 \ 2 Copy or 2 \ 1 Copy)

NOTE

C To reset each selection, press the RESET key.
∗ The initial setting of binding location for 1 \ 2 Copy and 2 \ 1 Copy (Long edge or
Short edge) can be set in function mode. (See page 30)
C 1 \ 2, 2 \ 2, 2 \ 1 Copy function is only available for DP-2010E.

Creative Features
Book \ 2 Copy (For DP-2010E)
■ Book \ 2 Copy
From book originals to 2-Sided copies.
Ledger size originals only.

Flipping (Book Format)*

Making Copies

Facing (Book Format)*

1
Place the
Original on
the Platen

Platen

(3 )

Press 2-Sided/
1-Sided Copy key
(circulation) to select
Book \ 2

COPY SIZE
(Reduction/
Enlargement Only*)

4 5
Number of
Copies

Press
START

Ledger size original
Book Mark Ledger
Center book by
length and width
according to
center marks.

Letter

NOTE

C To reset each selection, press the RESET key.
C Ledger and Legal copy sizes cannot be selected.
∗ The book format and page order can be set in function mode. (See page 30)
C Book \ 2 Copy function is only available for DP-2010E.

Creative Features
Job Memory
■ Two Copy Jobs Can Be Programmed in Memory (M1, M2) for recall at a
later time.

To Store a Job in Memory
# Set up the copy job to be stored in memory,
by first selecting each function you wish the
copier to perform.

JOB MEMORY
PRESS M1,M2 TO STORE.

$ Press the MEMORY IN (F2) key.
% Press the M1 (F3) or M2 (F4) key.

To Recall a Job Stored in Memory
& Place the Original

RECALL JOB MEMORY
LOADING...

( Press the M1 (F3) or M2 (F4) key.
The stored contents will be displayed.
) Press START

NOTE

C Stored job(s) will not be deleted even if the power switch is turned Off.
C When storing a new job into programmed memory, the previously stored job will be
overwritten.

Creative Features
Sort Copy
■ Sort Copy
The sort copy has 2 available electronic sorting functions as follows:
Note: Before using the sort copy, select the desired sorting mode by setting its function first
(See page 29).
Sort

Sort-Rotate
Multiple copies
sorted
automatically.

Multiple copies sorted
automatically and
Stacked in alternate
direction.

Platen Glass

(Up to Letter size)

Making Copies

ADF/i-ADF

ADF/i-ADF: Place the
Originals
Platen: Place the
First Original

(3)
COPY SIZE
(Reduction/
Enlargement
Only)

Select the
SORT Mode

4 5
Number of Press
Copies
START

From Platen Glass only:

6
9

ANOTHER ORIGINAL?
1:YES 2:NO
Press “1” key.
Repeat steps 6 and 7
until all originals are
scanned and stored
into the copier’s memory.

NOTE

7
10

Place next Original

Press START

ANOTHER ORIGINAL?
1:YES 2:NO
Press “2” key.

CWhen the memory becomes full during original scanning, the message
“OUT OF MEMORY” “CONTINUE? 1: YES 2: NO” will be displayed in the
message display. If this occurs, follow the instructions in the message
display.
For additional memory consult your authorized servicing dealer.
CTo reset all job settings, press the RESET key.

Other Features
Energy Saver/Interrupt Mode
INTERRUPT (F1) Key

ENERGY SAVER

ENERGY-SAVER Key

■ These modes can save power while the copier is not
in use.

Energy Saver Mode
# To enter this mode
Press the ENERGY-SAVER key or the copier will
automatically enter the ENERGY-SAVER Mode after
15 minutes* from the last copy. The indicator will flash.
$ To cancel this mode and make copies
Press the ENERGY-SAVER key again.

Sleep Mode
# Automatically enters the Sleep Mode after 30
minutes from the last copy. The copier power will
drop and the indicator will light.
$ To make copies, press the ENERGY-SAVER key.

Interrupt Mode
INTERRUPT

C This mode can interrupt other copy jobs while
making copies.
# Press the INTERRUPT (F1) key, the indicator will
light.
$ Make another copy job using the platen glass.
% Press the INTERRUPT (F1) key again to continue
the original job.
Note: The ADF can not be used with interrupt.
(Use only the Platen)

NOTE

∗

Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the
key operator. (See page 31)
Modes
Normal Operation
Energy Saver Mode
Sleep Mode

Power Consumption
Approximately 92 Wh
Approximately 40 Wh
Approximately 1.5 Wh

Warm Up Time
N/A
30 sec. recovery
30 sec. recovery

Other Features
Skyshot Mode
■ Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF/i-ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 30)

1
Place the Original on
the platen (Opening the
Platen Cover/ADF)

Number of
Copies

Press
START Key

Note:The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once.
If there are black areas around the borders in the copies, set the Digital Skyshot Mode to
“QUALITY” to soften the dark borders. In this setting, the unit scans twice.
# Press the FUNCTION key.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT
COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧
06 DIGITAL SKYSHOT
2:NORMAL

$ Press the 2 key to select COPIER SETTINGS.

% Press the SET key.

& Press 6 and SET key to select DIGITAL
SKYSHOT.
( Press 1-3 key to select the Digital Skyshot Mode.
1: OFF
NONE
2: NORMAL Default setting (usually select this
mode).
3: QUALITY For better definition, select the
Quality mode.
) Press the SET key.
* Press the RESET key.

NOTE

C An incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
Skyshot mode.
C An incorrect position detection of the original may occur when a strong light
shines onto the glass during Skyshot mode.

Making Copies

■ Digital Skyshot Mode

Other Features
Skyshot Mode
■ Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in
advance. (See page 32)
Platen
Upperleft
corner

Place the
Original

Select the Custom
Size (M1 or M2)

3 4
Number of
Copies

Press
START

# Press the FUNCTION key.

FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT

COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧

07 MANUAL SKYSHOT
2:M1 ON

$ Press the 2 key to select COPIER SETTINGS.

% Press the SET key.

& Press 7 and SET key to select MANUAL SKYSHOT.

( Press 2 or 3 key to select the Custom Size.
1: OFF
NONE
2: M1 ON
M1 size is ON*
3: M2 ON
M2 size is ON*
4: M1, M2 ON Both sizes are ON
) Press the SET key.
* Press the RESET key.

NOTE

∗ The default size for M1 is: 70(X) × 160(Y) mm, and M2 is: 95(X) × 220(Y) mm
C When changing the M1 or M2 size, consult with the key operator.
C When using the Manual Skyshot mode, M1 and M2 are turned ON and other
job memory cannot be used.
C Press the RESET key to cancel all job settings.

Combined Function Table

Book

Edge

Margin

Non-Sort

Sort

Sort-Rotate

Manual Skyshot

Job Memory Retrieval

Job Memory Storing

2 in 1 Copy

A A O A A A O

2 Page Copy

A A A A A A O

1\2

O A A A A A O

2\2

O A A A A A O

Book \ 2

O A A A A A O

2\1

O A A A A A O

Book

O O O O O O A

Edge

O O O O O O O

Margin

O O O O O O O

Non-Sort

O O O O O O O

Sort

O O O O O O O

Sort-Rotate

O O O O O O O

Manual Skyshot

✕ ✕ A A A A O

–

Interrupt

✕ O ✕ ✕ ✕ ✕ O

–

Book -> 2
2\1

2\2

1\2

2 in 1 Copy

O O O O O O O

2 Page Copy

Zoom Copy

2-ORIGINAL H
COPY
Margin

Remarks

First
Selections

SORT

Other
Functions

SORT

Zoom Copy

Next
Selections

Other
Functions

Margin

Making Copies

2-ORIGINAL
H COPY

O : Possible Combined Functions.
✕ : Unavailable Combined Functions.
A : Next Selection is Carried Out.
– : Indicates that SORT mode cannot be used. Non-sort operation is carried out.

Function
■ Using Function Modes to Change the Initial Copy Modes
Options
General
Functions

Copier
Settings

LAN Settings

Printer
Settings

Input Identification Code

General
Functions for
Key Operator

Copier
Settings for
Key Operator

■ Procedure

LAN Settings
for Key
Operator

Printer
Settings for
Key Operator

FUNCTION Key
RESET Key

COPY SIZE PAPER
Key
TRAY Key

FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧

# Press the FUNCTION Key
$ Press 1 (GENERAL FUNCTIONS) or 2
(COPIER SETTINGS) key. You may also use
the (G or F) keys.
% Press the SET key.
& Press the Keypad to select function modes
or use the (G or F) keys.
( Follow the on screen instructions.
) After setting, press the SET key to set up the
function.

■ Checking the Copier’s Total Counter
To display the copier’s Total Counter, press the COPY SIZE and PAPER TRAY keys
simultaneously.

NOTE

C Please refer to each option’s operating instructions for function settings.

Function
General Functions
No.

Modes

Function

Initial
Setting

SORT MODE DEFAULT

Selects the sort mode.
C NON-SORT, SORT

NON-SORT

SORT MEMORY USAGE

Displays the amount of sort memory used on
the panel.
C OFF, DISPLAY

OFF

DEPT. COUNTER

Copy usage and copy limit of the selected
department and total copy usage will appear
on the screen.

SORT-ROTATE DEFAULT

Select Sort-Rotate mode.
COFF, ON

Consult
your
service
technician.
OFF

KEY OPERATOR MODE

Input the key operator ID code.

Making Copies

Function
Copier Settings
No.

Initial
Setting

Function

MARGIN DEFAULT

Selects the margin position and shift value.
C POSITION (Left, Right, Top, Bottom)
C VALUE (5 - 99 mm)

LEFT
10 mm

EDGE DEFAULT

EQUAL RATE
5 mm

BOOK MARGIN DEF.

Selects the edge mode (Equal Rate = set the
same value for X & Y or Individual = set the
value for X & Y individually) and width.
C EQUAL RATE (X & Y ), INDIVIDUAL
C 5 - 99 mm
Selects the book Center Void margin width.
C 5- 99 mm

FRAME MARGIN

Select the reduction ratio in margin mode.
C INVALID, VALID

INVALID

2-SIDED MODE DEF.

OFF
Function sets the duplex priority mode.
COFF, 1 \ 2, 2 \ 2, Book \ 2 (For DP-2010E)

2 in 1 WITH FRAME

Selects whether or not to disable edge deletion.
C INVALID, VALID

INVALID

DIGITAL SKYSHOT

Enables or disables the use of skyshot mode.
C OFF, NORMAL, QUALITY

NORMAL

MANUAL SKYSHOT

Enables or disables the use of Manual
Skyshot.
C OFF; M1 ON; M2 ON; M1, M2 ON

OFF

AUTO EXPOSURE

Automatically adjusts the copy density for text
and photographic originals.
C INVALID, VALID

VALID

1 \ 2 BINDING DEF.

Selects the binding location for 1 \ 2 Copy.
C LONG EDGE, SHORT EDGE (For DP-2010E)

LONG EDGE

2 \ 1 BINDING DEF.

Selects the binding location for 2 \ 1 Copy.
C LONG EDGE, SHORT EDGE (For DP-2010E)

LONG EDGE

BOOK \ 2 DEFAULT

2 in 1 DEFAULT

Selects the page order and book format for
FLIPPING
Book \ 2 Copy.
L\R
1. BOOK FORMAT (1: FACING, 2: FLIPPING)
2. PAGE ORDER (1: L \ R, 2: R \ L) (For DP-2010E)
Selects the orientation and layout for 2 in 1 Copy. PORTRAIT
L\R
C ORIENTATION (Portrait, LANDSCAPE)
C LAYOUT (L \ R, R \ L)

2 PAGE MODE DEF.

Selects the 2 page mode.
C L \ R, R \ L

KEY OPERATOR MODE

Input key operator ID code.

NOTE

Modes

C Certain Functions or Parameters are available for selection only when their
respective option is installed.

20 mm

L\R

Function
General Functions for Key Operator
No.

Modes

Function
Selects the Control Panel reset time.
C OFF, 30 sec, 1 min., 2 min., 3 min., 4 min.
Sets the Energy Saver mode and time.
C INVALID, ENERGY-SAVER, SLEEP
Energy save mode timer : 1-120 minutes
Sleep mode timer
: 1-120 minutes

Initial
Setting
1 min.

AUTO RESET TIME

ENERGY SAVER MODE

LANGUAGE DEFAULT

SPECIAL TRAY 1

SPECIAL TRAY 2

KEY/TOUCH BEEP

BYPASS SET BEEP

ORIG. SET BEEP ADF

Sets the sound when put paper(s) on ADF.
C 1: INVALID 2: VALID

VALID

DEPT. COUNTER MODE

Consult
your
service
technician.

TOTAL COUNT

Monitors copy usage of each department.
(1) TOTAL COUNTER
(2) DEPT. COUNTER
(3) DEPT. COUNTER LIST
Total print out volume from the main unit.

PC PRINT COUNT

Total print out volume from the PC.

TCP/IP ADDRESS

∗

TCP/IP SUBNET MSK

TCP/IP G/W ADDR.

COPY SETTING LIST

NOTE

SLEEP

Selects the message language of the display.
A-ENGLISH
C A-ENGLISH, C-FRENCH, SPANISH
Sets the paper tray for special paper (ex: colored). NONE
C NONE, TRAY 1, TRAY 2, BYPASS

Sets the IP Address assigned to your machine.
C 3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
∗ Sets the Subnet Mask.
C 3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
∗ Sets the Subnet Mask.
C 3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
Prints list containing Current Setting and
Standard Setting.

NONE
SOFT

Making Copies

Sets the paper tray for special paper.
C NONE, TRAY 1, TRAY 2, BYPASS
Sets the panel touch sound.
C OFF, SOFT, LOUD
Sets the sound when put paper(s) on bypass
tray.
C 1: INVALID 2: VALID

INVALID

Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.

C It is necessary to input the Key Operator ID code before changing items on
this page.
C The Special Tray 1 and 2 are not auto-selectable in the switching mode.
∗ Not available for plain copier, but will be available when installing options
with advanced functions. (See page 57)

Function
Copier Settings for Key Operator
No.

Initial
Setting

Function

ORIGINAL (HOME)

TEXT CONTRAST

T/P CONTRAST

PHOTO CONTRAST

MAX. COPY SETTING

M1, SIZE

M2, SIZE

Input a size in memory 2 for frequent usage
size.
C X: 5~432/Y: 5~297 mm
(See page 22)

MEM. FULL ACTION

Selects the memory full action
C PRINT, CANCEL

NOTE

Modes

Selects original setting
C TEXT, T/P (Text/Photo), PHOTO
Selects contrast for Text mode
C1 ~ 5
Selects contrast for Text/Photo mode
C1 ~ 5
Selects contrast for Photo mode
C1 ~ 5
Determines whether to limit number of copies
C 1 ~ 999
Input a size in memory 1 for frequent usage
size.
C X: 5~432/Y: 5~297 mm
(See page 22)

T/P
(Text/Photo)
3
3
3
999
70 × 160 mm
(X) (Y)

95 × 220 mm
(X) (Y)

C It is necessary to input the Key Operator ID code before changing items on
this page.

Function
Function Setting
■ Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.

Proceed as Follows:

FUNCTION Key

FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧

# Press the 2 key to select COPIER SETTINGS.

2:COPIER SETTINGS
PRESS SET TO SELECT

$ Press the SET key.

COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧

08 AUTO EXPOSURE
2:VALID

Making Copies

Press the FUNCTION key.

% Press 8 and SET key to select AUTO
EXPOSURE MODE.
& Press 1 or 2 key to select whether Auto
Exposure is to be carried out or not.
( Press the SET key to set up the AUTO
EXPOSURE MODE.
) Press the RESET key to exit the Function mode.

Function
Function Setting for Key Operator
■ Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size
paper. To change the paper size, perform the steps shown below.

Press the FUNCTION key.

Proceed as Follows:

FUNCTION Key

FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧

# Press the 1 key to select GENERAL
FUNCTIONS.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT

$ Press the SET key.
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ∧

% Press 9 key.
09 KEY OPERATOR MODE
ENTER PASSWORD=- ■ ■

& Input the Key Operator ID code (3 digit)
and the SET key.
KEY OPR. MODE (00-25)
ENTER NO. OR ∨ ∧

( Press 00 and 1 or 2 key to select
the PAPER SIZE.
00 PAPER SIZE
1:TRAY-1[LTRB]

) Press SET to select the paper tray and
press (G or F) keys to set the paper
size.
Paper size changes are as follows.
Letter R

Invoice R

Letter

A4R

Legal

B5
Ledger

FLS2

FLS1

A5R

B5R

* Press the SET key to set up the PAPER
SIZE.
+ Press the RESET key to exit the Function
mode.

Function
Function Setting for Key Operator

Changing the Paper Guide and Paper Size Indicator in the Paper Tray
# Pull the Paper Tray out and remove
paper.

Paper
Guide a

Stopper

Paper
Guide b

Making Copies

$ Adjust the paper guide a to the
required paper length.
% Adjust the Paper Guide b to the
required paper width.
Pinch the stopper to move the Paper
Guide b.

& Change the Paper Size Indicator.

Size
Indicator
( Close the Paper Tray.

NOTE

C It is recommended that the paper guide b be fixed in place with screws.
Consult an authorized servicing dealer for details on how to fasten with
screws.

Function
Function Setting for Key Operator
■ Department Counter

The Key Operator can manage, limit copies, counters and code numbers for each department.
(Maximum department counters: 50)

Press the FUNCTION key.

Proceed as Follows:

FUNCTION Key

FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧

# Press the 1 key to select GENERAL
FUNCTIONS.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT

$ Press the SET key.
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ∧

& Press the Key Operator ID code (3 digit)
and SET key.
KEY OPR. MODE (00-25)
ENTER NO. OR ∨ ∧

( Press 14 and the SET key to select
DEPT. COUNTER MODE.

% Press 9 key.
09 KEY OPERATOR MODE
ENTER PASSWORD=- ■ ■

NOTE

C To reset the function mode, press the RESET key.
C Contact your authorized servicing dealer to enable the Department Counter
feature.

Function
Function Setting for Key Operator

Select the Department Counter Mode.
14 DEPT.COUNTER MODE
1:TOTAL COUNTER

DEPT. CODE (01-50)
ENTER NO. OR ∨ ∧

Change the Department ID Code, limit the maximum number of copies
and Department Counter number.
ID CODE
01:1234

Making Copies

Press 2 and the SET key.

# Press the Keypad and the SET key to input the
Department ID Code.
01: 1234

Department ID Code

Department No.
MAX COPIES
01:123456

$ Press the Keypad and the SET key to input the
maximun number of copies.
01: 123456

Maximun number of copies (6 digits)

Department No.
DEPT.COUNTER
01:123456

% Press the Keypad and the SET key (G or F keys) to
select the Department No.
01: 123456

Counter (6 digits)

Department No.
& Press 0 and the SET key (Input “0”) to clear the counter.

NOTE

C To reset the function mode, press the RESET key.

Accessories
Components
i-ADF (Inverting Automatic Document Feeder)
(DA-AR201)
C Feeds original automatically
C Duplexing
C 2:1 Copy
C 2 in 1 Copy

ADF (Automatic Document Feeder)
(DA-AS180)
C Feeds originals automatically.
C 2 in 1 Copy

Image Memory
(DA-SM08B/SM16B/SM64B/SM28B)
C 8/16/64/128 MB
C To increase the memory capacity for
electronic sorting and sort printing.

DP-1810P
with Options

DP-2010E
with Options

2nd/4th Paper Feed Module
(DA-DS182)
C To increase the paper feed sources
and capacity.
Paper Feed Module × 1 (550 sheets)

10/100 Ethernet Interface/
Internet Fax Kit
(DA-NE200)
C Network Interface Board

∗

PCL6 is a Page Description Language of the Hewlett-Packard Company.
C The table below shows the options which are required for various functions.
C Contact your authorized servicing dealer for details on combinations of options.

Sort-Rotate

Sort

Manual Skyshot

Other
Functions

SORT

Non-Sort

Margin

Edge

Book

Margin

2\1

Book \ 2

2\2

1\2

Options

2 Page Copy

2-ORIGINAL H
COPY

Function
Zoom Copy
2 in 1 Copy

NOTE

3rd Paper Feed Module
(DA-DS183)
C To increase the paper feed sources
and capacity.
Paper Feed Module × 1 (550 sheets)

Options

PCL6 Emulation Kit
(DA-PC210)
C Printer Controller for PCL6*

ADF
i-ADF
2nd/3rd/4th Paper
Feed Module
:Required

Accessories
Automatic Document Feeder
■ ADF (DA-AS180) / i-ADF (DA-AR201)
1. Features
# Automatic Original Feeding
C The ADF/i-ADF tray can hold up to 50 Letter size originals of 20 lb (80 g/m2) paper (up to 30
Legal or Ledger size originals). It can accommodate from Invoice to Ledger size originals.
C Automatic original size detection.
$ 2 in 1 Copy
C To make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side.
% Duplex Copying (DA-AR201)
C The i-ADF allows you to copy 2-sided originals either manually or automatically.

2. Components

C Set the originals up to the upper limit arrow.

ADF (DA-AS180)

i-ADF (DA-AR201)

ADF Tray
Original Guides
Adjust to the original’s width

i-ADF Tray
Original Guides
Adjust to the original’s width

Accessories

3. Operation

■ Operation Procedure
ADF/i-ADF

Face-Up

1
Place the
Original

(2)
For Duplex Copy
(If required)

Number of
Copies

Press
START

C Paste-ups
C Pressure sensitive or carbon backed papers
C Paper with excessive curl
C Stapled originals
C Freshly printed copies from a laser printer

Options

Inappropriate Originals
C Paper with a smooth surface such as glossy
and coated papers
CTransparencies
C Originals with a lead edge that is “creased”,
“folded”, “punched” or “glued”

NOTE

C To copy these kinds of originals, use the Platen Glass instead.

Problem Solving
J)
Adding Paper (J
■ 550-Sheet Paper Tray

Pull the Paper Tray out.

Place the paper with the copying
surface facing upward.

Make sure paper is not loaded
above the overfill indicator located
in the Paper Tray.

Firmly push the Paper Tray back
into the copier.

ATTENTION

Special papers, like glossy paper, mailing
labels and transparencies cannot be used
in the paper tray.
Use the Sheet Bypass for special paper.

C Do not use paper with folds or wrinkles.
Refer to page 35 for details on adjusting the paper tray size.
C Unused paper should always be placed into a bag and the opening should be sealed
for storage.
If the paper is left exposed, problems such as paper curl, paper jams, wrinkles or
loss of copied image quality may occur.

Problem Solving/U13
?)
Adding the Toner and Replacing Toner Waste Container (?

Open the Front Cover.

Remove the Toner Waste Container by
slowly pulling it towards the left as
illustrated.

Seal the container with the enclosed
cap and dispose of it properly.

Cap

# Turn the empty Toner Bottle
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
Note: To prevent toner spill, ensure
that the key is facing upwards
before removing the toner bottle.
$ Pull the empty Toner Bottle out.
Note: If the bottle will not pull out from
the machine, turn the bottle
slightly in either direction to
release the key and try it again.

Continued on the next page...

ATTENTION

C For optimum copy quality use the recommended Panasonic toner. Store toner in a cool
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
C When U13 is displayed the Add Toner Warning Indicator will begin to flash. This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced. When the countdown counter reaches 0, the copier will stop operating. To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.

J
?

Problem Solving
?)
Adding the Toner and Replacing Toner Waste Container (?

# Shake the new Toner Bottle four
or five times to loosen the
contents.

2
1

$ Remove the cap from the Toner
Bottle.

6
1

2-1

2-3

Incorrect

Correct

2-2

Install a new Toner Waste
Container.

Close the Front Cover.

ATTENTION

# Align the Key of the bottle, also
represented by the Arrow mark
(Unlocked symbol ) visible on
the end of the Toner Bottle with
the Arrow mark on the machine.
Note: To prevent toner spill,
ensure that the key is facing
upwards before installing the
bottle.
$ Insert the bottle as far as it will
go, then turn it clockwise (160°,
approx. 1/2 turn) until it locks
(Locked symbol ).
Note: If the bottle is not inserted
all the way into the machine
as illustrated, turn the bottle
slightly in either direction to
engage the key and try it
again.

C Do not reuse the toner from the Toner Waste Container.

Problem Solving
Removing a Misfed Paper
■ Paper Misfeed Indicators and Locations
When a paper misfeed occurs, the misfeed indicator and the misfeed
location(s) will be displayed on the panel display.

I Misfeed Indicator

For DP-1810P

For DP-2010E

Paper Misfeed Locations
A: ADF (see page 51), i-ADF(see page 50)
(J70, J71)
B: Copier (Paper Exit, Paper Entry/Transport,
ADU) areas (see page 46-48) (J51 - J59,
J80)
C: Paper Feed Module (see page 49)
(J00 - J50)

I
NOTE

C Make sure that the misfeed indicator goes off after removing the misfed
paper.
C The misfeed indicator will not go off if the paper is still jammed in the copier.
Check again and remove all misfed paper.

Problem Solving
Removing a Misfed Paper
■ Paper Exit Area
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

For DP-1810P

ATTENTION

For DP-2010E

Remove the misfed paper.

C Make sure that the misfeed indicator goes off after removing all misfed paper.

Problem Solving

■ Paper Entry/Transport Area
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

For DP-1810P

For DP-2010E

Open the Right Cover.

Remove the misfed paper.

If copy paper is fed far into the copier:
# Turn the right paper clearing knob.
$ Remove the misfed paper.

# Open the Heat Roller Cover.
$ Remove the misfed paper.
% Close the Right Cover.
Caution
heated
surface

Caution: This fuser area may be
hot.

I
ATTENTION

C Make sure that the misfeed indicator goes off after removing all misfed paper.

Problem Solving
Removing a Misfed Paper
■ ADU Area (For DP-2010E only)
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

Open the Right Cover.

Remove the misfed paper.

If copy paper is fed far into the copier;
# Turn the right paper clearing knob.

$ Remove the misfed paper.

4
48

Close the Right Cover.

Problem Solving

■ Paper Feed Module
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

For DP-1810P

For DP-2010E

# Pull the paper tray out.
$ Remove the misfed paper.
% Return the Paper Tray to the original
position.

# Open the Feed Cover.
$ Remove the misfed paper.
% Close the Feed Cover.

I
ATTENTION

C Make sure that the misfeed indicator goes off after removing all misfed
paper.

Problem Solving
Removing a Misfed Paper
■ i-ADF (For DP-2010E only)
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

# Open the Entry Cover.
$ Remove the misfed paper.
% Close the Entry Cover.

# Open the ADF Cover.
$ Remove the misfed paper.
% Close the ADF Cover.
& Open and close the Entry Cover to
reset the error.

# Lift up the ADF Input Tray.
$ Remove the misfed paper.
% Close the ADF Input Tray.
& Open and close the Entry Cover to
reset the error.

# Lift up the ADF Input Tray.
$ Open the ADF exit cover.
% Remove the misfed paper.
& Close the ADF exit cover.
( Close the ADF Input Tray.

ATTENTION

C Push the tab
on the center of the Entry Cover to close it.
C To prevent original(s) damage, please make sure to open the ADF Cover before
removing misfed original(s).

Problem Solving

■ ADF
C Make sure that the misfeed indicator
goes off after removing all misfed
paper.

# Open the Entry Cover.
$ Remove the misfed paper.
% Close the Entry Cover.

# Open the ADF Cover.
Note: To prevent damaging the originals,
open the ADF Cover before
removing the misfed original(s).
$ Remove the misfed paper.
% Close the ADF Cover.
& Close the ADF.

I
ATTENTION

C To prevent original(s) damage, please make sure to open the ADF Cover
before removing misfed original(s).

Troubleshooting
Before Calling Service

Action

Check
Unit Does Not Operate

Check if the Power Switch is turned On and
that the power cord is connected into the
outlet.

Does the display light?
(No)
Does the Energy Saver key flash (or light)
and displays are turned OFF? (See page
24)
(No)
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14, U20 and U21)
(See page 54)

(Yes)
Press Energy Saver key on the Control
Panel.
(Yes)
Perform actions in accordance with each
message.
(Yes)

(No)
Does the add paper indicator and message
appear on the display? (J)∗
(No)

Add paper. (See page 42)
(Yes)

Does the paper misfeed indicator and
message appear on the display? (I)
(No)

Remove the misfed paper. (See page 45)
(Yes)

Does E#-## indicator and message appear
on the display?

Turn the copier Off, then On. If the Error
Code does not clear, call for service.
(Yes)

When the Add Toner Warning Indicator begins to flash∗ or is lit, replace the toner bottle with a new
one. After this warning is activated, machine operation will begin with the Toner Charging Mode
(approximately 3 minutes to complete) each time the power switch is turned Off then On or if the
Front/Right Cover is opened and then closed.
Note: ∗When the warning indicator starts flashing, a 300-sheet count-down counter is activated,
and upon reaching 0 the machine will stop operating. The 300-sheet counter is based on
6 % fill, depending on the density some pages may print Blank.
Machine operation and displays are as follows:
1. When turning the power switch to On or opening and then closing the Front/Right Cover, the
machine starts to warm-up and the LCD displays:

PLEASE WAIT...

Troubleshooting

2. The Toner Charging Mode starts and the LCD displays:

CHARGING TONER

Add Toner Warning Indicator:
C Flashing = Toner Bottle is nearly empty
C Lit
= Toner Bottle is empty
3. This message is displayed for approximately 200 seconds.

CHARGING TONER
❚❚❚❚❚

∗

Each “ ❚ ” is approximately 10 sec.

4. This massage will continue to be displayed until the warm-up cycle is completed, and if the toner
bottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.

Check

Action

Light Copies

Press the Darker key until the indicator
LED is set to Darker. (See page 12)

Does the exposure indicator say “Lighter”?
(No)

(Yes)

Does the add toner indicator and message
appear on the display? (?)

Add Toner. (See page 43)
(Yes)

Marked Copies

Is the copier Platen Glass or Platen Cover
dirty?

Clean the Glass or Platen Cover.
(See page 54)

Others

(Yes)

Troubleshooting
User Error Codes (U Code)
The self-diagnostic functions detect troubles in the important components of the copier.
When any trouble occurs, the copier stops.
Code
U01
U07
U13

Display Message
CLOSE FRONT/RT COVER
CLOSE FEED COVER
TONER IS RUNNING LOW
NO WASTE TONER BOX

U14

WASTE TONER BOX IS FULL

U20

CLOSE ADF COVER

U21

CLOSE PLATEN COVER

Check Points
Front Cover is open.
Feed Cover is open.
1. Toner Cartridge is incorrectly installed.
2. Low Toner or No Toner Waste Container.
1. Toner Waste Container is incorrectly
installed.
2. Toner Waste Container is full of toner.
ADF Cover is open.
While the copier is initializing, the ADF
Cover was opened. (Optional ADF installed)

■ If the measures outlined above do not solve the problem, call your Service provider.

Copier Care
■ As a rule, clean weekly.
Platen/Platen Cover
Platen
Cover
Platen
(Glass)

# Wipe marks off with a cloth and a neutral
detergent.
$ Wipe again with a dry cloth.

Specifications
■ DP-1810P/2010E (Copier)
Type

Desktop

Platen Type

Fixed

Acceptable Originals

Sheets, Books (max. size = Ledger)

Copying Method

Laser Electrophotography

Fixing Method

Heat Roller Fixing

Imaging Method

Dry-Type Single component imaging

Resolution

Max. 600 dpi

Maximum Copy Size

Ledger

Minimum Copy Size

Invoice, via paper tray

Void Area

Max. 0.2 in (5 mm)

Warm Up Time

Approx. 30 seconds (68°F/20°C)

First Copy Time

Approx. 6.5 seconds (Letter

Multi-Copy Speed

DP-1810P : 18 cpm (Letter size)
DP-2010E : 20 cpm (Letter size)

Enlargement Ratios

Preset: 121 %, 129 %, 155 %, 200 %
Variable: from 101 to 200 % in 1 % increments

Reduction Ratios

Preset: 79 %, 77 %, 65 %, 61 %, 50 %
Variable: from 99 to 50 % in 1 % increments

Paper Feed

Paper Tray (550 sheets × 1) + Sheet Bypass (50 sheets)
2nd Paper Feed Module (550 sheets - option)
3rd Paper Feed Module (550 sheets - option)
4th Paper Feed Module (550 sheets - option)

Paper Weight

Paper Tray: 16 - 24 lb (60 - 90 g/m2)
[Sheet Bypass: 15 - 34 lb (56 - 128 g/m2)]

Quantity Selector

Max. 999 sheets (Output Tray capacity is 250 sheets)

Electrical Consumption

AC 120 V, 50/60 Hz, 9 A

Energy Consumption

Max. 1.2 kW, 1.5 Wh in Sleep Mode

Dimensions (W × D × H)

DP-1810P: 23.1 × 23.8 × 18.0 in (588 × 605 × 458 mm)
DP-2010E: 23.1 × 23.8 × 22.6 in (588 × 573 × 573 mm)

Weight

DP-1810P: 90 lb (41 kg)
DP-2010E: 113 lb (51 kg)

Operating Environment

Temperature: 50 - 86°F (10 - 30°C) Relative Humidity: 30 - 80 %
(However, the humidity should be 70 % or less at a temperature of 86°F (30°C),
and the temperature should be 86°F (30°C) or less at a humidity level of 85 %.)

, from 1st tray)

Others

C Specifications are subject to change without notice.

Specifications

■ ADF (DA-AS180)
DA-AS180
Tray Capacity

Letter, Invoice: 50 sheets (20 lb)
Ledger, Legal: 30 sheets (20 lb)

Paper Size

Invoice/Letter/Legal/Ledger

Paper Weight

14 – 28 lb (50 – 110 g/m2)

Electrical Requirements

Supplied from the copier

Dimensions (W × D × H)

22.0 × 19.7 × 4.4 in (558 × 501 × 112 mm)

Weight

11.0 lb (5.0 kg)

■ i-ADF (DA-AR201)
DA-AR201
Tray Capacity

Letter, Invoice: 50 sheets (20 lb)
Ledger, Legal: 30 sheets (20 lb)

Paper Size

Invoice/Letter/Legal/Ledger

Paper Weight

14 – 28 lb (50 – 110 g/m2)

Electrical Requirements

Supplied from the copier

Dimensions (W × D × H)

21.7 × 20.5 × 5.3 in (552 × 520 × 135 mm)

Weight

20.5 lb (9.3 kg)

■ 2nd/4th Paper Feed Module (DA-DS182)
DA-DS182
Paper Size

Invoice/Letter/Legal/Ledger

Paper Weight

16 – 24 lb (60 – 90 g/m2)

Electrical Requirements

Supplied from the copier

Dimensions (W × D × H)

21.7 × 6.1 × 23.0 in (550 × 155 × 585 mm)

Weight

20.9 lb (9.5 kg)

■ 3rd Paper Feed Module (DA-DS183)
DA-DS183
Paper Size

Invoice/Letter/Legal/Ledger

Paper Weight

16 – 24 lb (60 – 90 g/m2)

Electrical Requirements

Supplied from the copier

Dimensions (W × D × H)

21.7 × 6.1 × 23.0 in (550 × 155 × 585 mm)

Weight

20.9 lb (9.5 kg)

C Specifications are subject to change without notice.

Options and Supplies
■ The DP-1810P/2010E is a digital photocopier which can produce images with great clarity.
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following
options and supplies.
We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.

■ Options
Part Name

Part No.

Remarks

Automatic Document Feeder

DA-AS180

Also referred as ADF

Inverting Automatic Document Feeder

DA-AR201

Also referred as i-ADF (For DP-2010E only)

DA-DS182

(2nd Paper Feed Module is standard on DP-2010E)
(4th Paper Feed Module is for DP-2010E only)

3rd Paper Feed Module

DA-DS183

(3rd Paper Feed Module is for DP-2010E only)

Plain Stand (High)

DA-DA180

For USA/Canada only

Plain Stand (Medium)

DA-DA181

For USA/Canada only

Plain Stand (Low)

DA-DA182

For USA/Canada only

Base Stand

DA-DA183

For USA/Canada only

Image Memory (8 MB)

DA-SM08B

For Electronic Sorting and Sort Printing

Image Memory (16 MB)

DA-SM16B

For Electronic Sorting and Sort Printing

Image Memory (64 MB)

DA-SM64B

For Electronic Sorting and Sort Printing

Image Memory (128 MB)

DA-SM28B

For Electronic Sorting and Sort Printing

2nd/4th Paper Feed Module

■ For Printer
Part Name

Part No.

PCL6 Emulation Kit

DA-PC210

Remarks
Printer Controller for PCL6.
(For Network Printing, DA-NE200 is also required)

■ For Network Printing
Part Name

Part No.

10/100 Ethernet Interface/
Internet Fax Kit

DA-NE200

Remarks
Network Interface Board

■ Supplies
Part No.

Toner Bottle

NOTE

DQ-TU10C

∗

Remarks
Toner Waste Container included

PCL6 is a Page Description Language of the Hewlett-Packard Company.

Others

Part Name

U.S.A. Only
WARRANTY
PANASONIC DOCUMENT IMAGING COMPANY MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO THE CUSTOMER WITH RESPECT TO THIS
PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PANASONIC DOCUMENT IMAGING COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT
TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE
CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC MACHINE.
SEE YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.

For Service, Call:

Panasonic Document Imaging Company
A Business Unit of Matsushita Electric Corporation of America
Two Panasonic Way
Secaucus, New Jersey 07094

Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario L4W 2T3

S0402-0
DZSD001728-0
April 2002
Printed in Japan

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2002:04:11 00:33:05Z
Subject                         : P01-03
Modify Date                     : 2002:04:30 15:07:37-04:00
Page Count                      : 60
Has XFA                         : No
Creation Date                   : 2002:04:11 00:33:05Z
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : win14
Keywords                        : 
Mod Date                        : 2002:04:11 01:58:49+09:00
Metadata Date                   : 2002:04:11 01:58:49+09:00
Title                           : P01-03
Description                     : P01-03
Creator                         : win14

EXIF Metadata provided by EXIF.tools

Panasonic DP 1810P P01 03 User Manual To The 21b07b0f E073 477b 8bf1 A86b8da7d3ba

Navigation menu

Versions of this User Manual:

Views

Navigation