Panasonic KX FM220 User Manual To The 7ae8aa1d Dd73 44ee B50a 19dc942e0814

User Manual: Panasonic KX-FM220 to the manual

Open the PDF directly: View PDF .
Page Count: 112 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Multi-Function

Plain Paper FAX

Model No.

KX-FM220

Please read these Operating Instructions

before using the unit and save for future

reference.

¡This product is designed for use in the

United States of America, and may not

operate in other countries. (See page

106 for more details.)

¡Este producto ha sido diseñado para su uso

en los Estados Unidos de América, y puede

no funcionar correctamente en otros países.

(Consulte la página 106 para tener más

detalles.)

FOR OPERATION ASSISTANCE,

CALL 1-800-HELP-FAX (1-800-435-7329)

OR SEND A FAX TO 1-215-741-2069.

Quick Start Advanced

Operations Special Settings Troubleshooting

and Routine Care General

Information

TO GET STARTED

EASILY,

PLEASE READ

THIS SECTION FIRST.

OPERATING INSTRUCTIONS

Multi-Function

Center

For your future reference

Date of purchase Serial No.

(found on the bottom of the unit)

Dealer’s name and address

Dealer’s telephone number

2

Thank you for purchasing the Panasonic Multi-Function Plain Paper Facsimile.

Caution:

¡The telephone Protection Act of 1991 requires the following information to be clearly stated either at the top

or bottom margin of the first message page when transmitting messages via telephone facsimile;

—Date and time of transmission,

—Identification of the business, entity or person(s) sending the facsimile and,

—Telephone number of the business, entity or person(s).

To program this information into your facsimile machine, complete all the instructions on pages 13 through

15.

¡Note that the images of copied or received documents will remain on the used film. When disposing of the

used film, use discretion.

¡Do not rub or use an eraser on the printed side, as the print may smear.

Trademarks

IBM is a registered trademark of International Business Machines Corporation.

Microsoftgand Windowsgare registered trademarks of Microsoft Corporation in the United States and/or other

countries.

All other trademarks identified herein are the property of their respective owners.

Copyright:

This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME) and its licensee. Under the

copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written

consent of KME and its licensee.

jKyushu Matsushita Electric Co., Ltd. 1997

Things you should keep records of

Attach your sales receipt here

Welcome to the world of Panasonic facsimiles.

This Panasonic compact plain paper facsimile combines the telephone, telephone

answering system, copier, scanner, PC Fax and printer functions to provide you with more

efficient office or home use. By utilizing these convenient features, you can maximize the

effectiveness of this unit.

3

Important safety instructions

When using this unit, basic safety precautions

should always be followed to reduce the risk of fire,

electric shock, or personal injury.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on

this unit.

3. Unplug this unit from AC outlets before

cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this unit near water, for example:

near a bath tub, wash bowl, kitchen sink, etc.

5. Place this unit securely on a stable surface.

Serious damage and/or injury may result if the

unit falls.

6. Do not cover slots and openings on the unit.

They are provided for ventilation and

protection against overheating. Never place

the unit near radiators, or in a place where

proper ventilation is not provided.

7. Use only the power source marked on the unit.

If you are not sure of the type of power

supplied to your home, consult your dealer or

local power company.

8. For safety purposes this product is equipped

with a three prong grounded plug. If you do

not have this type of outlet, please have one

installed. Do not use any type of adaptor plug

to defeat this safety feature.

9. Do not place objects on the power cord. Install

the unit where no one can step or trip on the

cord.

10. Do not overload wall outlets and extension

cords. This can result in the risk of fire or

electric shock.

11. Never push any objects through slots in this

unit. This may result in the risk of fire or

electric shock. Never spill any liquid on the

unit.

12. To reduce the risk of electric shock, do not

disassemble this unit. Take the unit to an

authorized servicenter when service is

required. Opening or removing covers may

expose you to dangerous voltages or other

risks. Incorrect reassembly can cause electric

shock when the unit is subsequently used.

13. Unplug this unit from the wall outlet and refer

servicing to an authorized servicenter when

the following conditions occur:

A. When the power supply cord or plug is

damaged or frayed.

12. B. If liquid has been spilled into the unit.

12. C. If the unit has been exposed to rain or

water.

12. D. If the unit does not work normally by

following the operating instructions. Adjust

only controls covered by the operating

instructions. Improper adjustment may

require extensive work by an authorized

servicenter.

12. E. If the unit has been dropped or physically

damaged.

12. F. If the unit exhibits a distinct change in

performance.

14. During thunderstorms, avoid using telephones

except cordless types. There may be a remote

risk of an electric shock from lightning.

15. Do not use this unit to report a gas leak, when

in the vicinity of the leak.

SAVE THESE

INSTRUCTIONS

INSTALLATION:

1. Never install telephone wiring during a lightning

storm.

2. Never install telephone jacks in wet locations

unless the jack is specifically designed for wet

locations.

3. Never touch uninsulated telephone wires or

terminals unless the telephone line has been

disconnected at the network interface.

4. Use caution when installing or modifying

telephone lines.

WARNING:

To prevent the risk of fire or electrical shock, do

not expose this product to rain or any type of

moisture.

OTHER INFORMATION

¡Keep the unit away from electrical noise-

generating devices, such as fluorescent lamps

and motors.

¡The unit should be kept free from dust, high

temperature and vibration.

¡The unit should not be exposed to direct sunlight.

¡Do not place heavy objects on top of this unit.

¡Do not touch the plug with wet hands.

4

For Assistance, Call 1-800-435-7329

Before you start

¡Included accessories RRRRRRRRRRRRRRRRRRRRRRR 6

¡Accessory order information RRRRRRRRRRRRRRRRRRRR 6

¡Overview RRRRRRRRRRRRRRRRRRRRRRRRRRRR 7

Installation

¡Installing the diverter RRRRRRRRRRRRRRRRRRRRRRR 8

¡Installing the paper RRRRRRRRRRRRRRRRRRRRRRRR 8

¡Connecting the telephone line and the power outlet RRRRRRRRR 10

¡Location of controls RRRRRRRRRRRRRRRRRRRRRRR 11

¡Help function RRRRRRRRRRRRRRRRRRRRRRRRRR 12

Initial preparation

¡Setting the date and time RRRRRRRRRRRRRRRRRRRRR 13

¡Setting your logo RRRRRRRRRRRRRRRRRRRRRRRR 14

¡Setting your facsimile telephone number RRRRRRRRRRRRRR 15

Basic operations

¡Making voice calls RRRRRRRRRRRRRRRRRRRRRRRR 16

¡Answering voice calls <Caller ID capability>RRRRRRRRRRRRR 17

¡Making a copy RRRRRRRRRRRRRRRRRRRRRRRRR 18

¡Transmitting documents RRRRRRRRRRRRRRRRRRRRR 20

¡Receiving documents (receive mode, etc.) RRRRRRRRRRRRR 22

¡Operating the answering device RRRRRRRRRRRRRRRRRR 26

Table of Contents

Quick Start

Advanced

Operations

Special receiving modes

FAX (FAX ONLY) mode

(receiving fax documents only)

RRRRRRRRRR 29

TEL/FAX mode (automatic voice and fax recognition) RRRRRRRRRR 30

Automatic dialing

Storing telephone numbers for automatic dialingRRRRRRRRRRRRR 33

Making voice calls using automatic dialing RRRRRRRRRRRRRRR 34

Transmitting documents using automatic dialingRRRRRRRRRRRRR 34

Electronic telephone directory

(selecting a station name in the directory)

RR 35

Telephone

Voice contact (talking to the caller during or

after fax reception or transmission) RRRRRRRRRRRRRRRRR 36

TONE, FLASH and REDIAL/PAUSE buttons RRRRRRRRRRRRRR 37

Special sending features

Polling (retrieving fax documents) RRRRRRRRRRRRRRRRRRR 38

Delayed transmission (sending a fax at a later time) RRRRRRRRRRR 39

Reserving transmission during fax reception RRRRRRRRRRRRRR 40

Special receiving features

Remote fax receiving

(using an extension telephone to receive a fax message)

41

Receiving with a distinctive ring service RRRRRRRRRRRRRRRR 42

Answering device

Recording your own greeting messages RRRRRRRRRRRRRRRR 43

Transferring incoming call messages RRRRRRRRRRRRRRRRR 45

Operating the answering device from a remote telephone RRRRRRRR 47

Enhanced copy features

Making a reduction copy RRRRRRRRRRRRRRRRRRRRRRR 52

5

Quick Start

For Assistance, Call 1-800-435-7329

Advanced

Operations Special Settings Multi-Function

Center Troubleshooting

and Routine Care General

Information

Special

Settings

Troubleshooting

Error messages on the display RRRRRRRRRRRRRRRRRRRR 89

Before requesting help RRRRRRRRRRRRRRRRRRRRRRRR 91

If a power failure occurs... RRRRRRRRRRRRRRRRRRRRRR 93

Error codes on your PC when using Multi-Function Center software RRRR 94

Clearing a recording paper jam RRRRRRRRRRRRRRRRRRRR 96

Clearing a document jam RRRRRRRRRRRRRRRRRRRRRRR 98

Adjusting the feeder pressure RRRRRRRRRRRRRRRRRRRRR 98

Routine care

Checking the remaining film RRRRRRRRRRRRRRRRRRRRR 99

Replacing the film or film cartridgeRRRRRRRRRRRRRRRRRRR 99

Cleaning the inside of the unit RRRRRRRRRRRRRRRRRRRR 101

FCC information RRRRRRRRRRRRRRRRRRRRRRRRRR 102

Limited warranty RRRRRRRRRRRRRRRRRRRRRRRRRR 103

Service center directory RRRRRRRRRRRRRRRRRRRRRRR 104

User information RRRRRRRRRRRRRRRRRRRRRRRRRR 105

Specifications RRRRRRRRRRRRRRRRRRRRRRRRRRR 106

One-touch dialing list RRRRRRRRRRRRRRRRRRRRRRRR 107

Speed dialing list RRRRRRRRRRRRRRRRRRRRRRRRRR 109

Index RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR 111

Troubleshooting

and

Routine Care

Features RRRRRRRRRRRRRRRRRRRRRRRRRRRRRR 74

Preparation RRRRRRRRRRRRRRRRRRRRRRRRRRRRR 74

Connecting to a computer RRRRRRRRRRRRRRRRRRRRR 74

Installing the Multi-Function Center software RRRRRRRRRRRRR 75

Included applications RRRRRRRRRRRRRRRRRRRRRRR 75

Printing/faxing from a Windows application RRRRRRRRRRRRRRR 76

Receiving faxes on your PC RRRRRRRRRRRRRRRRRRRRR 80

Faxing a document on the facsimile unit RRRRRRRRRRRRRRRR 83

Making an Address Book RRRRRRRRRRRRRRRRRRRRRRR 84

Scanning and saving documents RRRRRRRRRRRRRRRRRRR 85

Receiving faxes directly to your fax machine RRRRRRRRRRRRRR 86

Getting help for further informationRRRRRRRRRRRRRRRRRRR 87

Multi-Function

Center

General

Information

Summary of user programmable featuresRRRRRRRRRRRRRRRR 53

Setting the ANS/FAX mode ring count RRRRRRRRRRRRRRRR 54

Setting the FAX (FAX ONLY) mode ring count RRRRRRRRRRRR 55

Setting the TEL/FAX mode ring count RRRRRRRRRRRRRRRR 56

Setting the silent fax recognition ring count RRRRRRRRRRRRRR 57

Changing the caller’s recording timeRRRRRRRRRRRRRRRRR 57

Setting the dialing mode RRRRRRRRRRRRRRRRRRRRRR 58

Changing the logo print position RRRRRRRRRRRRRRRRRR 59

Sending documents overseas RRRRRRRRRRRRRRRRRRR 60

Receiving oversized documents RRRRRRRRRRRRRRRRRR 61

Changing the display contrast RRRRRRRRRRRRRRRRRRR 62

Setting the message alert RRRRRRRRRRRRRRRRRRRRR 63

Setting the recording time alert RRRRRRRRRRRRRRRRRRR 63

Setting the memory reception alert RRRRRRRRRRRRRRRRR 64

Setting the friendly reception RRRRRRRRRRRRRRRRRRRR 64

Setting the fax voice guidance RRRRRRRRRRRRRRRRRRR 65

Changing the recording time for the ANS/FAX greeting message RRRR 66

Setting the ICM monitor RRRRRRRRRRRRRRRRRRRRRR 66

Signaling your pager that you have received a fax document RRRRRR 67

Setting the film detectionRRRRRRRRRRRRRRRRRRRRRR 68

Resetting the advanced features RRRRRRRRRRRRRRRRRR 69

Printing reports and lists RRRRRRRRRRRRRRRRRRRRRRR 70

Model No. Description

KX-FA135 Film cartridge

KX-FA136

KX-FA180

Replacement film

Serial cable

Specifications Comment

1 cartridge and 1 film

[216 mmq100 m (81⁄2wq328P) roll]

2 films

[216 mmq100 m (81⁄2wq328P) rolls]

DB9 Female/DB25 Male

Includes Adaptor

The film has been already

installed in the cartridge.

Film only. Use with your

original cartridge.

RS232C compatible cable

6

Quick Start

For accessory order, call toll free 1-800-332-5368

Before you start

Included accessories

(To order, call toll free 1-800-332-5368 or see the fax order instructions below.)

¡If any items are missing or damaged, contact your dealer.

¡The part numbers listed above are subject to change without notice.

¡Save the original carton and packing materials for future shipping and transporting of the unit.

Power cord RRR 1 pc.

Part No. PQJA200Z Telephone line

cord RRRRRR 1 pc.

Part No. PQJA59V

HandsetRRRRR 1 pc.

Part No. PFJXE0105Z Handset cord RR 1 pc.

Part No. PQJA212M

Diverter RRRRR 1 pc.

Part No. PFUS1074Z Paper tray RRRR 1 pc.

Part No. PFYEFP200M Film cartridge RR 1 pc.

(with starter film) Panasonic Multi-Function

Center Software

(Floppy disks)RR 3 pcs.

Part No. PFZXFM210M

—The film cartridge is

pre-installed.

Accessory order information

The starter film is only 20 meters (65P) long. We recommend buying regular film [100 m

(328P)] for extra stock.

To order, call toll free 1-800-332-5368 or see the fax order instructions below.

Fax orders: Please send a fax to 1-800-237-9080. Include: Your name, shipping address,

telephone number, credit card type, number, expiration date and your signature, part

number of the accessories you want, and quantity. Also include the delivery method—

overnight, 2nd day, or ground.

Note:

The film is not reusable. Do not rewind and use the film again.

Before you start

To use this unit with your PC

Purchase a Panasonic KX-FA180 serial cable or a RS232C cable (DB9 Female/DB25 Male).

To order a KX-FA180, call toll free 1-800-332-5368 or see the fax order instructions below, or purchase at any

computer supply store.

Overview

Document feeder

tray

Recording paper

set lever

Diverter

Paper stacker

Paper tray

Recording paper exit

Document guide(s)

Front cover open

lever

Serial interface connector

(Used to connect to your PC with a

RS232C cable. For system requirements,

see page 74.)

Document exit

Recording paper

entrance

Microphone

(Used to talk the other party when using the speakerphone.

Also used to record greeting messages.)

7

Quick Start Before you start

For Assistance, Call 1-800-435-7329

Document entrance

Speaker

8

Quick Start

For Assistance, Call 1-800-435-7329

Installation

Installing the diverter

Insert the diverter into the slots on the main unit until it

clicks into place.

Installing the paper

The recording paper size that can be loaded is letter or legal. The paper tray can hold up to 150 sheets of

75 g/m2(20 lb.) paper. Use 60 to 90 g/m2(16 to 24 lb.) paper.

1Open the paper tray.

2Insert the two fins on the paper tray into the slots

on the back of the unit.

3Pull the recording paper set lever forward.

Paper tray

Paper tray

Slots

Fins

Recording paper

set lever

Diverter

Slots

Installation

Bottom

9

Quick Start Installation

For Assistance, Call 1-800-435-7329

6Pull out the paper stacker from the bottom of the

unit completely.

¡Do not place the unit in areas where the paper

tray may be obstructed by walls, etc.

4Fan the stack of paper to avoid a paper jam and

insert the paper into the paper tray.

¡The height of the stack of the paper should not

exceed the upper limit on the paper tray, or it

may cause a paper jam.

¡The paper should not be over the tab.

¡If the paper is not inserted correctly, readjust the

paper or a paper jam may occur.

5Move the recording paper set lever back.

Paper stacker

Recording paper

set lever

Note:

¡Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a

paper jam.

¡Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or

wrinkled, or paper with a cotton and/or fiber content that is over 20%.

¡Avoid used paper for double-sided printing.

¡Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam

may occur.

Upper limit

Tab

Adding paper to the paper tray

1. Pull the recording paper set lever forward.

¡The unit will beep and the following message is

displayed.

Display:

2. Remove the paper from the paper tray.

3. Add more paper to the removed paper.

4. Fan the entire stack of paper and insert it into the

paper tray.

5. Move the recording paper set lever back.

CHECK LEVER

Recording paper

set lever

Correct Incorrect

Paper tray

stack of

paper

Automatic dialing mode setting

When the power cord is connected, the unit will start detecting the dialing mode.

Display:

Wait until one of the following messages is displayed:

—If your line has touch tone service, the unit will display the following message:

Display:

—If your line has rotary pulse dial service, the unit will display the following message:

Display:

¡If you connect the power cord before connecting the telephone line cord, the following messages will be

shown alternately:

Connect the telephone line cord.

¡If the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when

power is restored.

¡You can change the dialing mode setting manually. See page 58.

TEL LINE IS OPENCONNECT TEL LINE

LINE IS PULSE

LINE IS TONE

CHECKING LINE

10

Quick Start

For Assistance, Call 1-800-435-7329

Installation

Connecting the telephone line and the power

outlet

Note:

¡For additional equipment protection, we recommend the use of a surge protector. The following types are

available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE

MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).

¡When you operate this product, the power outlet should be near the product and easily accessible.

¡If the following message is displayed when the unit is plugged in, the recording paper set lever is released.

Display:

Move the lever back (see step 5 on page 9).

CHECK LEVER

Power outlet

(120 V, 60 Hz)

Line surge

protector

( )

( )

Power surge

protector

Power socket

Single telephone line

(RJ11C)

Power cord

Telephone line cord

Handset

Handset cord

1. Connect the handset and handset cord.

2. Connect the telephone line cord.

3. Connect the power cord.

¡When the power is turned on for the first

time, the unit will print an information list

about the starter film.

Control panel

11

Quick Start Installation

For Assistance, Call 1-800-435-7329

Location of controls

1 2

ABC DEF

JKLGHI MNO

TUV

OPER

FAX/MSG.SYS.

PRS

TONE

FLASH STOP

VOLUME

RINGER/HANDSET/SPEAKER

DIRECTORY

MENU

FILM REMAINING

MEMORY% CALLS

RESOLUTION

1

10

2

11

3

12

4

13

5

14

6

15

7

16

8

17

9

18

LOWER

AUTO RECEIVE

DIGITAL

START/COPY/SET

REDIAL/PAUSE

MUTE

WXY

3

4 5 6

7 8 9

0

SP-PHONE

OPEN

MIC

ERASE NEW

MESSAGES

HELP

Dial keypad

Used to print a quick reference

(see “HELP function” on the next page).

Display

panel

Used to select a resolution (p. 18).

Checks the amount of remaining film

(p. 99).

Changes from pulse to tone during dialing (p. 37).

Used as a hookswitch (p. 37).

Used to turn on/off the auto

receive mode (p. 22, 24).

Used for voice muting (p. 16).

Used to initiate fax transmission/reception and copying.

Also used to store a parameter during programming.

Used to stop an operation

or programming.

Adjusts ringer/handset/speaker volumes.

Also used as a cursor key or a selection key

(p. 13, 16, 17).

Used for the speakerphone operation (p. 16).

Used for speed dialing (p. 34, 35).

Used to initiate/exit programming.

Redials the last number dialed.

Also inserts a pause during dialing (p. 37).

Used for one-touch dialing.

Also used as character and

command keys (p. 14, 33, 34).

Used to select a

lower station

(p. 33, 34).

Used to erase recorded messages (p. 26, 44).

Used to listen to new recorded messages (p. 26, 27).

12

Quick Start

For Assistance, Call 1-800-435-7329

Installation

HELP

For assistance, press (HELP). The unit will print a quick

reference.

Help function

ALL

MESSAGES

REPEAT SKIP

SLOW QUICK

CHECKREC

SELECT

PLAYBACK

GREETING

MEMO/

2WAY REC

Location of controls (cont.)

Used to select a greeting message (p. 43, 44).

Used to check greeting

messages (p. 44).

Used for quick playback

(p. 27).

Used to record a

greeting message (p. 43).

Used for slow

playback (p. 27).

Used to repeat recorded messages (p. 27).

Used to play back all messages (p. 26, 27).

Used to skip a recorded message (p. 27).

Used to record a memo message (p. 28).

Also used to record a telephone conversation (p. 28).

Answering control buttons

13

Quick Start Initial preparation

For Assistance, Call 1-800-435-7329

1 2 3

4 5 6

7 8 9

0

Setting the date and time

Before using your unit, program the correct date and time, your logo and your facsimile telephone

number.

This information will be printed on the top of each page transmitted from your unit.

1Press (MENU).

Display:

2Press K, then @A.

3Press (START/COPY/SET).

4Enter the correct month/day/year by selecting

each 2 digits.

Example:Aug. 10 1997

Press @HA@IG.

¡If you make a mistake, press (fi)/(fl)

((VOLUME)) to move the cursor to the

incorrect number, then make corrections.

5Press (START/COPY/SET).

6Enter the correct hour/minute by selecting

each 2 digits.

Press Jto select AM or PM.

Example:3:00PM

Press @C@@, then press J

until PM is displayed.

¡If you make a mistake, press (fi)/(fl)

((VOLUME)) to move the cursor to the

incorrect number, then make corrections.

TIME: 03:00PM

M:08/D:10/Y:97

SET DATE & TIME

SYSTEM SET UP

Note:

¡If you press (STOP)while programming, the

display will return to the previous one.

¡The accuracy of the clock will be

approximately L60 seconds a month.

(MENU)

(STOP)

(START/COPY/SET)

Dial keypad

Fax Correspondence

FROM : Panasonic Fax system PHONE NO : 1234567 Feb. 26 1997 04:02PM P1

Your logo Your facsimile telephone number Date and time

(fi)/(fl)

((VOLUME))

Initial preparation

7Press (START/COPY/SET).

8Press (MENU).

14

Quick Start

For Assistance, Call 1-800-435-7329

Initial preparation

1 2 3

4 5 6

7 8 9

0

Direct

call

station

keys

Dial

keys

1

2

3

4

0

9

8

7

6

5

1

2

6

7

3

8

1 [ ] { } + – / = , . _ '

A B C a b c 2

D E F d e f 3

G H I g h i 4

J K L j k l 5

M N O m n o 6

P Q R S p q r s 7

T U V t u v 8

W X Y Z w x y z 9

0 ( ) < > ! " # $ % & ¥

: ; ? | U@ ^ ’ ¢

INSERT key (Used to insert one

character or one space.)

SECRET key (Used for automatic

dialing on page 33.)

SPACE key (Used to replace one

character with a space.)

DELETE key (Used to delete one

character.)

HYPHEN key (Used to insert a

hyphen.)

⁄key (Used to move the cursor to

the left.)

¤key (Used to move the cursor to

the right.)

Keys Characters

Setting your logo

The logo can be a company, division or personal name in an abbreviated form.

1Press (MENU).

Display:

2Press K, then @ B.

3Press (START/COPY/SET).

4Enter your logo up to 30 characters using the

dial keypad and direct call station keys.

For example, when entering “Bill” as your logo:

1. Press Btwice.

2. Press Dsix times.

3. Press Esix times.

4. Press (fl) ((VOLUME)) to move the cursor

and press Esix times.

Note:

¡If you use the same number key continuously

to enter the next character, press

(fl) ((VOLUME)) to move the cursor.

5Press (START/COPY/SET).

6Press (MENU).

LOGO=Bill

LOGO=Bil

LOGO=Bi

LOGO=B

LOGO=

YOUR LOGO

SYSTEM SET UP

(START/COPY/SET)

(STOP)

(MENU)

Dial keypad Direct call

station keys

To correct a mistake while

programming

Use (fi)/(fl) ((VOLUME)) to move the cursor to the

incorrect character, then make the correction.

or

Press (STOP) to delete the character to the left of

the cursor.

Character table

(fi)/(fl)

((VOLUME))

15

Quick Start Initial preparation

For Assistance, Call 1-800-435-7329

Setting your facsimile telephone number

1Press (MENU).

Display:

2Press K, then @ C.

3Press (START/COPY/SET).

4Enter your facsimile telephone number up to

20 digits.

¡The Kbutton inserts a space and the Jbutton

a “+”.

¡If you make a mistake, press (fi)/(fl)

((VOLUME)) to move the cursor to the incorrect

number, then make corrections.

OR

Press (STOP) to delete the wrong number to the

left of the cursor.

5Press (START/COPY/SET).

6Press (MENU).

NO.=

YOUR TEL NO.

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(MENU)

(STOP)

(START/COPY/SET)

Dial keypad

(fi)/(fl)

((VOLUME))

16

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Making voice calls

1Press (DIGITAL\SP-PHONE) or lift the handset.

2Dial the telephone number.

¡If you misdial, hang up and dial again.

3When the other party answers, speak into the

microphone or handset.

4When finished, press (DIGITAL\SP-PHONE) or

hang up the handset.

Voice muting

Using this feature, the other party cannot hear you

but you can hear them.

1. Press (MUTE) during a telephone conversation.

Display:

2. To resume the conversation, press (MUTE).

Handset volume

Press (VOLUME) (’/‘) while using the handset.

¡3 levels (high/middle/low) are available.

Speaker volume

Press (VOLUME) (’/‘) while using the

speakerphone.

¡8 levels (high to low) are available.

Hints for speakerphone operation:

¡Use the speakerphone in a quiet room.

¡If you have difficulty hearing the other party,

adjust the volume using (VOLUME).

¡If you and the other party speak at the same

time, parts of your conversation will be cut off.

¡To switch to the handset, lift the handset. To

switch back to the speakerphone, press

(DIGITAL\SP-PHONE).

<MUTE>

Dial keypad

(DIGITAL\SP-PHONE)

(MUTE) (VOLUME)

Microphone

Basic operations

Handset

17

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

Answering voice calls

1When the unit rings, press (DIGITAL\SP-PHONE)

or lift the handset.

2When finished, press (DIGITAL\SP-PHONE) or

hang up the handset.

(DIGITAL\SP-PHONE)

(START/COPY/SET)

Handset

(VOLUME)

Ringer volume

Press (VOLUME) (’/‘) while the unit is idle.

¡4 levels (high/middle/low/off) are available.

To turn the ringer off:

1. Press (VOLUME) (’) repeatedly.

¡The following messages will be shown

alternately:

Display:

2. Press (START/COPY/SET).

While the ringer volume is set to off:

The display will show the following message and the

unit will not ring when receiving a call:

When receiving a call, the unit will not ring, but will

show the following message:

INCOMING CALL

RINGER OFF

YES: PRESS SET

RINGER OFF= OK?

Caller ID capability

This unit is compatible with a Caller ID service offered

by your local telephone company. To use this feature,

you must subscribe to a Caller ID service.

Caller ID allows you to view the name or telephone

number of the caller before you answer the call. The

calling party information (name has priority) will be

displayed after the first ring.

By using Caller ID, you have the option of whether or

not to answer the call depending on the caller.

The unit also keeps the caller’s information and prints a

list automatically after every 35 calls.

¡To set this feature, see page 73.

¡To print out the caller list manually, see page 70.

Important:

¡When you subscribe to a Caller ID service,

set the ring count settings to 2 or more rings:

—ANS/FAX mode ring count (p. 54),

—FAX (FAX ONLY) mode ring count (p. 55)

and

¡—TEL/FAX mode ring count (p. 56).

18

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Making a copy

Any transmittable document can be copied.

1Open the document feeder tray.

2Insert the documents (up to 15 sheets) FACE

DOWN until a beep tone is heard.

3Adjust the document guides to the width of the

document.

4Press (RESOLUTION) repeatedly to the desired

setting, if needed (see below).

5Press (START/COPY/SET).

¡The unit will start printing.

Note:

¡When copying, the unit will automatically select FINE

resolution.

¡You can make or receive a voice call while making a

copy.

(STOP)

(START/COPY/SET)

To stop copying

Press (STOP).

FACE DOWN

(RESOLUTION)

Document guides

Document

feeder tray

Selecting the resolution

You can select the desired resolution by pressing

(RESOLUTION).

For printed or

typewritten originals

with normal-sized

characters.

For originals with

small printing.

For originals with

minute printing.

For originals

containing

photographs,

shaded drawings,

etc.

Note:

¡Using the fine, super fine or half tone setting will

increase the transmission time.

¡If the resolution setting is changed during

feeding, it will be effective from the next sheet.

¡The super fine resolution only works with other

compatible machines.

To feed 16 or more sheets

at a time

Insert the first 15 sheets of the document. Add the

extra sheets (up to 15) before the last sheet is fed

into the unit.

STANDARD

FINE

SUPER FINE

HALF TONE

19

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

128 mm

(5w)

128 mm

(5w)

600 mm

(235⁄8w)

216 mm

(81⁄2w)

Paper width

216 mm (81⁄2w)

208 mm (83⁄16w)

Scanned

area

4 mm

Minimum size Maximum size Effective scanning area Document weight

Single sheet:

45 to 90 g/m2(12 to 24 lb.)

Multiple sheets:

60 to 75 g/m2(16 to 20 lb.)

Documents the unit can feed

Note:

¡Remove clips, staples or other similar fastening objects.

¡Check that ink, paste or correction fluid has dried.

¡Do not send the following types of documents: (Use copies for fax transmission.)

—Chemically treated paper, such as carbon or carbonless duplicating paper

—Electrostatically charged paper

—Heavily curled, creased or torn paper

—Paper with a coated surface

—Paper with a faint image

—Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)

20

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Document

feeder tray

(RESOLUTION)

Transmitting documents

1Open the document feeder tray.

2Insert the documents FACE DOWN (up to

15 sheets) until a beep tone is heard.

3Adjust the document guides to the width of the

document.

4Press (RESOLUTION) repeatedly to the desired

setting, if needed (see page 18).

5Press (DIGITAL\SP-PHONE) or lift the handset.

6Dial the telephone number.

¡If you misdial, hang up and dial again.

7When a fax tone is heard, press

(START/COPY/SET).

8Hang up the handset if using it.

Note:

¡If the other party answers your call, ask them to start

receiving a fax, then press your (START/COPY/SET).

FACE DOWN

Dial keypad

(START/COPY/SET)

(STOP)

(DIGITAL\SP-PHONE)

Document guides

To stop transmission

Press (STOP).

¡To eject the document, press (STOP) again.

Fax voice guidance about

transmission

After transmission, one of the following messages

will tell you the result.

—Transmission is complete.

—Transmission has failed.

—Transmission has been interrupted.

You can set this feature to OFF and the guidance

will not be heard. Or you can set this feature to

ERROR and the guidance will prompt you only

when fax transmission fails (see page 65).

21

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

Need help?—Follow the voice guide

FACE DOWN

Dial keypad

(START/COPY/SET)

(DIGITAL\SP-PHONE)

(MENU)

1Press (MENU) until the following is displayed.

Display: XMT VOICE GUIDE

2Press (HELP).

3Insert the documents FACE DOWN until a beep

tone is heard.

4Press (DIGITAL\SP-PHONE).

5Dial the telephone number.

6When a fax tone is heard, press

(START/COPY/SET).

Voice guide:

Voice guide:

Voice guide:

Note:

¡You can lift the handset instead of pressing

(DIGITAL\SP-PHONE) in step 4.

To transmit, insert the document face

down until you hear the beep.

Press the speaker phone button, then dial

the phone number. When the fax tone is

heard, press the start button.

Start transmission.

(HELP)

Fax voice guidance volume

Press (VOLUME) (’/‘) while listening to the

voice guidance.

¡9 levels (high to off) are available.

(VOLUME)

22

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Receiving documents (receive mode, etc.)

Setting the receive mode

The unit has two receive modes:

The AUTO RECEIVE mode allows your unit to receive all calls automatically without your assistance.

Use this mode when you wish to use the unit solely as a facsimile machine or when you are going out.

The MANUAL RECEIVE mode lets you answer calls by lifting the handset. Use this mode when you are in

and wish to answer voice and fax calls.

These modes can be selected by pressing the (AUTO\RECEIVE) button.

AUTO RECEIVE and MANUAL RECEIVE have two different receive settings.

The unit will answer all calls automatically and activate

the fax function (see page 29). To change the number of

rings before a call is answered, see page 55.

When a voice call is detected, the telephone answering

machine will record the voice message.

When a fax call is detected, the facsimile unit will receive

fax documents (see pages 24 and 25). To change the

number of rings before a call is answered, see page 54.

When the unit rings, you must answer all calls by picking

up the handset.

¡When a fax call is received, you can start fax reception

by pressing (START/COPY/SET).

For further details, see page 23.

¡You can change to the ANS/FAX mode from a remote

location. Call your unit from a touch tone telephone

and wait for 15 rings. The answering system will

temporarily answer the line.Then enter the remote

operation ID (page 48) during the greeting message.

The unit will switch to the ANS/FAX mode.

When a fax call is detected, the unit will automatically

answer the line and start reception.

When a voice call is detected, the unit will start to ring.

You can lift the handset to answer the call.

For further information about this mode, see pages

30 through 32. To change the number of rings before a

call is answered, see page 56.

MANUAL RECEIVE MODE

The FAX/MSG.SYS.

indicator is on.

FAX (FAX

ONLY)

mode

ANS/FAX

mode

(pre-selected)

The FAX/MSG.SYS.

indicator is off. TEL mode

(pre-selected)

TEL/FAX

mode

Records voice messages and/or receives fax

documents.

Receives fax documents only.

Allows you to answer all calls manually.

Automatic voice and fax recognition

AUTO RECEIVE

FAX/MSG.SYS.

FAX/MSG.SYS.

AUTO RECEIVE

AUTO RECEIVE MODE

Note:

¡Regardless of the mode you select, you can always place calls and send faxes.

23

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

AUTO RECEIVE

FAX/MSG.SYS.

Friendly reception

When you answer the call and hear a slow beep,

the unit will automatically start fax reception even if

you do not press (START/COPY/SET).

¡If this feature is not required, set to OFF (see

page 64).

When friendly reception is activated, one of the

following messages will be heard.

—Please hang up the handset for reception.

—Start reception.

¡If the voice guidance feature is set to OFF, these

messages will not be heard (see page 65).

Fax voice guidance about

reception

After reception, one of the following messages will

tell you the result.

—Reception is complete.

—Reception has failed.

—Reception has been interrupted.

¡You can set this feature to OFF. Or you can set

this feature to ERROR and the guidance will

prompt you only when fax reception fails (see

page 65).

¡When the unit receives fax documents

automatically, the voice guidance will not be

played.

Memory reception

When a printing problem is detected, the unit will

temporarily store the received document into

memory.

While documents are in memory, the unit will:

—display an error message and the following

message alternately:

Display:

—alert you with a slow beep (Receive alert).

¡Follow the instructions on pages 89 and 90 to

clear the problem and print the stored document.

¡For memory capacity, see page 106.

To stop reception

Press (STOP).

FAX IN MEMORY

Allowing you to answer all calls manually (TEL mode)

1When the unit rings, press (DIGITAL\SP-PHONE)

or lift the handset to answer the call.

2When:

—document reception is required,

—a slow beep is heard, or

—no sound is heard,

press (START/COPY/SET).

3Hang up the handset, if using it.

(DIGITAL\SP-PHONE)

(START/COPY/SET)

(STOP)

The FAX/MSG.SYS.

indicator is off.

24

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Receiving fax documents and/or recording incoming voice

messages automatically (ANS/FAX mode)

When you turn on the AUTO RECEIVE mode (pre-selected setting is ANS/FAX), the unit will work as a

facsimile machine and/or answering device.

If a fax call is detected, the unit will automatically switch to receive faxes.

If a voice call is detected, the answering system will begin recording, then the caller can leave a voice

message.

¡You can use a pre-recorded greeting message (see the next page) or record your own greeting message

(see page 43).

Setup of voice message and document reception

The total recording time (including the greeting messages) is about 18 minutes. If messages are recorded in a

noisy environment, the recording time may be shortened up to 11 minutes.

To record incoming voice messages and receive fax documents, follow the steps below:

1Make sure that the AUTO RECEIVE mode is set to

ANS/FAX (see page 29).

2To turn on the AUTO RECEIVE mode, press

(AUTO\RECEIVE) until the FAX/MSG.SYS.

indicator light goes on.

¡The display shows the following message:

Display:

¡The remaining time for recording incoming

messages will be displayed.

Example: TIME LEFT=10m13s

ANS/FAX MODE

AUTO RECEIVE

FAX/MSG.SYS.

Note:

¡Each incoming message recording time can be set to either 1 minute or unlimited. To change the setting, see

page 57.

¡When the remaining time is low, erase unnecessary messages from memory (see pages 26 and 50).

¡While an incoming call is being recorded, you can monitor it through the speaker. If this feature is not

required, set the ICM monitor feature to OFF (see page 66).

Receiving documents (receive mode, etc.) (cont.)

The FAX/MSG.SYS. indicator is on.

25

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

Pre-recorded greeting messages

The unit has pre-recorded greeting messages. According to the situation, one of the following messages will

be played to the caller.

»When you do not record your own greeting message (page 43), the following message will be

played.

Hello! We are unable to answer right now.

To send a fax, please start transmission.

To leave a voice message, please speak after the beep.

Thank you.

»When the unit detects a problem, one of the following pre-recorded greeting messages will be

played.

MESSAGE FULL

MESSAGE FULL

and

FAX MEMORY FULL

Hello! We are unable to answer right now.

Please try again later.

Thank you.

Hello! We are unable to answer right now.

To send a fax, please start transmission.

To leave a voice message, please try again later.

Thank you.

Note:

¡If you erase your own greeting messages, the pre-recorded greeting messages will play automatically.

FAX MEMORY FULL

Hello! We are unable to answer right now.

To send a fax, please try again later.

To leave a voice message, please speak after the beep.

Thank you.

26

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Operating the answering device

Listening to recorded messages

When the unit receives voice messages;

—the NEW MESSAGES indicator will flash,

—the call counter will show the total number of recorded messages, and

—a slow beep will sound if message alert (page 63) is set to ON.

» To listen to new messages

« Press (NEW\MESSAGES).

»To listen to all messages

«Open the station key panel, then press

(ALL\MESSAGES).

Note:

¡During playback, the display shows the recorded order

of the messages.

¡Adjust the speaker volume using (VOLUME).

¡The number of calls in the call counter will not reset

until you erase your message.

CALLS

(call counter)

Voice time/day stamp:

During playback, a synthesized voice will

announce the time and day when each message

was recorded.

Erasing recorded messages

Erase unnecessary messages to prevent memory from becoming full.

»To erase specific messages

»Press (ERASE) while listening to the message you

want to erase.

¡3 beeps will sound and the following message is

displayed. Display:

»¡To stop erasing, press (STOP) during 3 beeps.

»To erase all messages

»1. Press (ERASE) after listening to all of the

messages.

¡To stop erasing, press (STOP).

»2. Press (START/COPY/SET).

ERASING

STOP=CANCEL

(START/COPY/SET)

(ERASE)

(STOP)

(VOLUME)

Station

key panel

(NEW\MESSAGES)

(ALL\MESSAGES)

NEW MESSAGES

indicator

↑ ↓

ERASE COMPLETED

CLEAR MESSAGES?

YES:PRESS SET

27

Quick Start Basic operations

For Assistance, Call 1-800-435-7329

Functions during playback

»To repeat a message

»Press (REPEAT) while listening to the message you

want to repeat.

»¡If you press (REPEAT) within 5 seconds of the

beginning of the message, the previous message

will be played.

»¡To play back a specific message, press (REPEAT)

repeatedly until you hear the message you want to

repeat.

»¡When you want to repeat the new messages, press

(NEW\MESSAGES) first, open the station key

panel and press (REPEAT).

»To skip a message

»Press (SKIP) to play the next message.

»¡When you want to skip the new messages, press

(NEW\MESSAGES) first, open the station key

panel and press (SKIP).

»To change the playback speed

»Press (QUICK) to play messages at one and a half

times the original speed.

Press (SLOW) to play messages at a half the

original speed.

»To return to the original speed:

Press (QUICK) or (SLOW) again during quick or

slow playback.

»To stop playback

»Press (STOP).

»¡To resume the new recorded messages, press

(NEW\MESSAGES) within 1 minute after pressing

(STOP).

»¡To resume all of the recorded messages, press

(ALL\MESSAGES).

(ALL\MESSAGES)

(NEW\MESSAGES) (SKIP)

(STOP)

(REPEAT)

(QUICK)

(SLOW) Station

key panel

28

Quick Start

For Assistance, Call 1-800-435-7329

Basic operations

Recording a telephone conversation

1During the telephone conversation, open the

station key panel.

2Press (MEMO/2WAY\REC).

Display:

3To stop recording, press (STOP) or hang up.

2WAY RECORDING

Station

key panel

(STOP)

(MEMO/2WAY\REC)

Note:

¡There may be legal restrictions in your state on

recording two way telephone conversations. Inform the

other party that the conversation is being recorded.

Recording a memo message

To leave a private message for someone, you can record a voice memo. This memo can be played back later,

either directly or remotely.

1Open the station key panel.

2Press (MEMO/2WAY\REC).

¡A long beep will sound.

3Speak clearly into the microphone.

4When finished, press (STOP).

Microphone

Station

key panel

(STOP)

(MEMO/2WAY\REC)

Operating the answering device (cont.)

Setting the answering device

volume

Press (VOLUME) (’/‘) while listening to the

recorded messages.

¡9 levels (high to off) are available.

(VOLUME)

(VOLUME)

29

Advanced

Operations

FAX (FAX ONLY) mode

(receiving fax documents only)

When you turn on the AUTO RECEIVE mode set to FAX (FAX ONLY), the unit works as a dedicated facsimile

machine. The unit will automatically answer all calls and generate fax tones to the callers.

Special receiving modes

123

456

789

0

Changing the AUTO RECEIVE mode setting

Change the AUTO RECEIVE setting from the ANS/FAX mode to the FAX (FAX ONLY) mode.

1Press (MENU).

Display:

2Press K, then @E.

3Press (START/COPY/SET).

4Press or to select FAX (FAX ONLY).

¡To return to the ANS/FAX mode, select ANS/FAX.

5Press (START/COPY/SET).

6Press (MENU).

MODE=FAX [ML]

MODE=ANS/FAX[ML]

AUTO RECEIVE

SYSTEM SET UP

(START/COPY/SET)

(MENU)

Dial keypad

AUTO RECEIVE

FAX/MSG.SYS.

Setting the FAX (FAX ONLY) mode

Press (AUTO\RECEIVE) until the FAX/MSG.SYS.

indicator light goes on.

¡The display shows the following message:

Display: FAX MODE

The FAX/MSG.SYS. indicator is on.

30

TEL/FAX mode

(automatic voice and fax recognition)

Use this mode when you wish to receive voice calls with rings, but do not want to hear the unit ring when

faxes are received.

When a call is received, the unit will work as follows:

A call is received.

The unit will automatically answer the line without ringing.

(At this point, a telephone fee will be charged to the caller.)

¡If a TEL/FAX greeting message is recorded (see page 43), it will be played to the caller.

If extension telephones are connected, only they will ring before the call is answered. \

The unit will now distinguish between a voice and fax call by detecting the calling tone.

Fax call Voice call

The unit will receive a document. The unit will start to ring. \

¡While ringing, the unit will emit a

different ring-back-tone to the calling

party.

Answer the call using the speakerphone

or the handset.

¡If you do not answer the call by a

preset number of rings, the facsimile

unit will switch to the fax.

Silent ring fax recognition system

\Regarding the ringing pattern of extension telephones and the facsimile unit, see “Helpful hints

when using the TEL/FAX mode” on the next page.

Note:

¡Some fax messages that are transmitted manually may not send a calling tone. These calls must be received

manually.

31

Advanced

Operations

1 2 3

4 5 6

7 8 9

0

1Press (MENU).

Display:

2Press K, then @ H.

3Press (START/COPY/SET).

4Press or to select TEL/FAX.

¡To return to the TEL mode, select TEL.

5Press (START/COPY/SET).

6Press (MENU).

MODE=TEL/FAX[ML]

MODE=TEL [ML]

MANUAL RECEIVE

SYSTEM SET UP

(START/COPY/SET)

(MENU)

Dial keypad

Setting the TEL/FAX mode

Change the MANUAL RECEIVE setting from the TEL mode to TEL/FAX mode.

Helpful hints when using the TEL/FAX mode

»If an extension telephone is connected, the facsimile unit and the extension telephone will ring as

follows.

The extension

telephone will ring twice.

TEL/FAX ring count

The facsimile unit will ring up to

3 times.

Silent fax recognition ring count

5 sec.

If a fax calling tone (slow beep) is

detected, the unit will automatically

activate the fax function to receive

documents without ringing.

The unit will

automatically activate the

fax function to receive

documents.

Note:

¡You can change the number of rings for the TEL/FAX ring count and silent fax recognition ring count (see

pages 56 and 57).

32

TEL/FAX mode (cont.)

Using the TEL/FAX mode

1Record the TEL/FAX mode greeting message (see

page 43).

¡The TEL/FAX mode greeting message will be

played to the caller when the unit automatically

answers an incoming call.

2Set the MANUAL RECEIVE mode to TEL/FAX

(see page 31).

3Make sure that the AUTO RECEIVE mode is

turned off.

¡If the FAX/MSG.SYS. indicator light is on, press

(AUTO\RECEIVE) to turn off the AUTO

RECEIVE mode.

¡The display shows the following message:

Display: TEL/FAX MODE

AUTO RECEIVE

FAX/MSG.SYS.

The FAX/MSG.SYS. indicator is off.

33

Advanced

Operations

1 2 3

4 5 6

7 8 9

0

Storing telephone numbers for automatic dialing

The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most

frequently dialed numbers.

One-touch dialing: 18 stations (Each of the 9 direct station keys is divided into an upper station and a lower

station).

Speed dialing: This unit is equipped with 100 additional dialing stations. These stations are assigned to

2-digit numbers (00–99).

1Press (MENU) until the following message is

displayed.

Display:

2a One-touch dialing:

For upper stations (1–9)

Press one of the direct call station keys.

a: For lower stations (10–18)

Press (LOWER), then press one of the direct

call station keys.

2b Speed dialing:

Press K, then press the desired 2-digit number

(00–99).

3Enter the telephone number up to 30 digits in

length.

¡To enter a hyphen in a telephone number, press

(HYPHEN) (direct call station 8).

4Press (START/COPY/SET).

5Enter the station name, up to 10 characters, by

following the instructions on page 14.

6Press (START/COPY/SET).

¡To program other stations, repeat steps 2a (or

2b) to 6.

7Press (STOP).

NAME=

STORE TEL NO.

To keep the telephone number

confidential

Press (SECRET) (direct call station 3) after

entering the telephone number.

¡The telephone number will not appear on the

display or the telephone number list.

¡(SECRET) is not counted as a digit.

To erase a stored number and

station name

Press (STOP) in step 3 to erase the telephone

number. Press (DELETE) (direct call station 7)

repeatedly in step 5 until all of the characters are

erased.

Then press (START/COPY/SET).

Helpful hint:

¡To confirm stored telephone numbers and

station names, print a telephone number list

(see page 70).

(MENU)

(LOWER)

(STOP)

(START/COPY/SET)

Speed dial

stations

Direct call

stations (DELETE)

(SECRET)

(HYPHEN)

Automatic dialing

34

Making voice calls using automatic dialing

1Press (DIGITAL\SP-PHONE) or lift the handset.

2a Using one-touch dialing:

For upper stations (1–9)

Press the desired direct call station key.

For lower stations (10–18)

Press (LOWER), then press the desired direct

call station key.

2b Using speed dialing:

Press (DIRECTORY), then press Kand the

desired 2-digit number (00–99).

Transmitting documents using automatic dialing

1Insert the documents FACE DOWN.

2a Using one-touch dialing:

For upper stations (1–9)

Press the desired direct call station key.

For lower stations (10–18)

Press (LOWER), then press the desired direct

call station key.

2b Using speed dialing:

Press (DIRECTORY), then press Kand the

desired 2-digit number (00–99).

(DIRECTORY)

Direct call

stations

(LOWER)

(DIGITAL\SP-PHONE)

Speed dial

stations

(DIRECTORY)

FACE DOWN

Direct call

stations

(LOWER)(STOP)

Speed dial

stations

Fax auto redial

If there is no answer or the line is busy, the unit will

automatically redial the number up to 5 times.

This feature is available for;

—receive polling (p. 38)

—delayed transmission (p. 39)

During auto redial, the display shows:

Display:

To cancel redialing, press (STOP).

WAITING REDIAL

35

Advanced

Operations

P, Q, R, S, 7

T, U, V, 8

W, X, Y, Z, 9

0

Other symbols

(Used for speed

dialing.)

Dial

key

1

A, B, C, 2

D, E, F, 3

G, H, I, 4

J, K, L, 5

M, N, O, 6

Index Dial

key Index

1Press (DIRECTORY).

Display:

2Press the dial key that corresponds to the first

initial of the desired station name (see the index

table below).

Example: To search a name starting with “N”:

Press Funtil the first station name

starting with “N” is displayed. Press

until the desired name is displayed.

OR

Press or repeatedly until the desired

name is displayed.

3Press (START/COPY/SET).

¡The unit will start dialing.

¡If a document is fed into the unit, the unit will start

transmission.

SELECT INDEX

Electronic telephone directory

(selecting a station name in the directory)

The station names stored in memory are automatically registered into the electronic telephone directory in

alphabetical order. You can make a fax or voice call by selecting the desired station name on the display.

If you wish to send a fax, insert the documents into the document tray first.

(DIRECTORY)

(START/COPY/SET)

Dial keypad

FACE DOWN

2

3

4

5

6

7

8

9

0

1

36

Voice contact

(talking to the caller during or after fax reception or

transmission)

You can have a conversation with the same call after the fax message is completed. This will save the extra

expense and time of making another call.

This feature works only when the other party’s unit is equipped with a voice contact feature.

Initiating voice contact

1Press (DIGITAL\SP-PHONE) while transmitting or

receiving documents.

Display:

¡Your unit will call the other party with a distinctive

ring.

2When the other party answers, your unit will emit a

distinctive ring.

Press (DIGITAL\SP-PHONE) or lift the handset to

start talking.

¡If you initiate voice contact during transmission,

you can talk after all of the documents have been

transmitted.

¡If you initiate voice contact during reception, you

can talk after the current page of the document is

received.

VOICE STANDBY

Receiving a request for voice contact

If the other party initiates voice contact, your unit will emit a distinctive ring after transmission or reception is

completed.

When the distinctive ring is heard, press (DIGITAL\SP-PHONE) or lift the handset, then start talking.

Note:

¡If you do not answer within 10 seconds of the distinctive ring;

—if in the ANS/FAX mode, your unit will play back a greeting message and record an incoming voice

message.

¡—if in the TEL/FAX, FAX (FAX ONLY) or TEL mode, the line will be disconnected.

(DIGITAL\SP-PHONE)

FACE DOWN

Telephone

37

Advanced

Operations

1 2 3

4 5 6

7 8 9

0

TONE button

The TONE (*) button is used for rotary pulse dial

services and allows you to temporarily change from

pulse to tone mode during a dialing operation.

When you hang up, the unit will automatically return to

the pulse mode.

FLASH button

The FLASH button functions as the hookswitch on a

regular telephone. If you misdial or dial another

telephone number, press the FLASH button firmly.

The FLASH button also allows you to use special

features of a host exchange (if connected) or local

telephone company services, such as call waiting. For

further details, contact your local telephone company.

TONE, FLASH and REDIAL/PAUSE buttons

9PAUSE Telephone number

Line access code

International

access code Country

code Telephone

number PAUSE PAUSE

Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end

of the telephone number.

Redialing the last number dialed

If the REDIAL/PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will

be redialed.

1. Lift the handset or press (DIGITAL\SP-PHONE).

2. Press (REDIAL/PAUSE).

¡If the line is busy when using the DIGITAL SP-PHONE button, the unit will automatically redial the

number up to 14 times.

Note:

¡TONE, FLASH and PAUSE can be stored

into a telephone number for automatic

dialing.

Entering pauses

If the REDIAL/PAUSE button is pressed during dialing, a pause will be inserted.

Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line.

(FLASH)

(TONE)

(REDIAL/PAUSE)

(DIGITAL\SP-PHONE)

38

Polling

(retrieving fax documents)

The polling feature allows you to receive a document from another compatible machine where you pay for the

call. This saves the sending party the call charges.

Receive polling

1Press (MENU) until the following is displayed:

Display:

2Press (START/COPY/SET).

3Enter the telephone number by using regular

dialing, one-touch dialing, speed dialing or the

electronic telephone directory.

4Press (START/COPY/SET).

NO.=

POLLING

Transmit polling

1Insert the documents FACE DOWN.

2Press (MENU) until the following is displayed:

Display:

3Press (START/COPY/SET).

4Press or to select “ON”.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

POLLED ON

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

POLLED

Note:

¡This feature will not work when the unit is set

to the TEL mode.

¡The caller pays for the document

transmission.

¡When delayed transmission (see the next

page) is set to ON, transmit polling is not

available.

(MENU)

(START/COPY/SET)

Dial keypad

FACE DOWN

(MENU)

Special sending features

(START/COPY/SET)

A document stored in your unit can be recovered by

another party’s machine. To let other machines retrieve

documents loaded on your unit, proceed as follows:

To place a call and recover a document from another

machine follow the steps below. Make sure that no

documents have been fed into your unit and that the

other party’s machine is ready for your call.

39

Advanced

Operations

1Insert the documents FACE DOWN.

2Press (MENU).

Display:

3Press K, then B E.

4Press (START/COPY/SET).

5Press or to select “ON”.

¡If this feature is not required, select “OFF”.

6Press (START/COPY/SET).

7Enter the telephone number by using regular

dialing, one-touch dialing, speed dialing or the

electronic telephone directory.

8Press (START/COPY/SET).

9Enter the transmission start time.

Example: 11:00PM

Press aa @@, then press Jto

select PM.

¡You can select AM or PM by

pressing J.

10 Press (START/COPY/SET).

11 Press (MENU).

¡When the programmed time has arrived, the

unit will automatically start transmission.

SEND AT 11:00PM

TIME=12:00AM

NO.=

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

DELAYED XMT

SYSTEM SET UP

Delayed transmission

(sending a fax at a later time)

Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take

advantage of low-cost calling hours offered by your telephone company. The delayed transmission can be

reserved to take place up to 24 hours in advance.

Note:

¡You can receive, transmit and copy

documents while delayed transmission is set.

¡If the programmed time is during a power

failure, delayed transmission will be

attempted soon after power is restored.

¡When transmit polling (see page 38) is ON,

delayed transmission is not available.

FACE DOWN

(MENU)

(START/COPY/SET)

Dial keypad

40

Reserving transmission during fax reception

While the unit is receiving documents, you can reserve your fax transmission to another station.

The unit will automatically transmit documents after fax reception is completed.

1Insert the documents FACE DOWN during fax

reception.

2Enter the telephone number by using regular

dialing, one-touch dialing, speed dialing or the

electronic telephone directory.

3Press (START/COPY/SET).

Display:

To cancel the reservation

Remove the documents from the document tray.

XMT RSV. ON

Dial keypad

FACE DOWN

(START/COPY/SET)

41

Advanced

Operations

1 2 3

4 5 6

7 8 9

0

Receiving using an extension telephone

1Press (MENU).

Display:

2Press K, then D A.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Enter the new code number.

7Press (START/COPY/SET).

8Press (MENU).

CODE=U9

MODE=ON [Ÿÿ]

REMOTE FAX ACT.

SYSTEM SET UP

Remote fax receiving

(using an extension telephone to receive a fax message)

If you have an extension telephone on the same line, it is possible to receive a fax message. Use the

extension telephone to dial the remote fax activation code.

This saves you from going to the facsimile unit and pressing (START/COPY/SET).

Important:

¡To activate this feature, use a touch tone telephone as the extension telephone and enter the remote fax

activation code FIRMLY.

¡The remote fax activation code is set to “U9” as a pre-selected setting.

1When a call is received, lift the extension

telephone handset.

2When:

—document reception is required,

—a slow beep is heard, or

—no sound is heard,

enter the remote fax activation code FIRMLY.

3Hang up the handset.

¡The facsimile unit is activated for reception.

Changing the remote fax activation code

This code can be from 2 to 4 digits in length using numbers 0 through 9, and the character *.

Note:

¡Some special telephone company services

will require you to press a service access

code. If you subscribe to such services, all or

part of the remote fax activation code must

be different from the service access code.

¡If the remote fax activation code is set to

“0000”, this feature will not work properly.

To the same line

Extension telephone

(MENU)

(START/COPY/SET)

Dial keypad

Special receiving features

42

1 2 3

4 5 6

7 8 9

0

Receiving with a distinctive ring service

This feature can only be used by those who subscribe to a distinctive ring pattern service from their

telephone company. For more information on the availability of this service, please contact your

telephone company before setting this feature to ON.

The distinctive ring service gives you up to 3 telephone numbers on a single line, each having a different

ringing pattern.

When you use one of the telephone numbers as a facsimile number, program the ringing pattern assigned for

fax into your unit. When the unit detects a call matching the selected distinctive ringing pattern, the unit will

activate depending on the receive mode setting.

Setting the distinctive ringing pattern

Program the ring pattern assigned for fax. Ringing patterns that can be programmed are:

A: Standard ring (one long ring)

B: Double ring (two short rings)

C: Triple ring (short-long-short rings)

D: Other triple ring (short-short-long rings)

OFF: Turns off the ring pattern detection feature (pre-selected setting)

1Press (MENU).

Display:

2Press K, then C A.

3Press (START/COPY/SET).

4Press or to select the ring pattern

assigned for the facsimile number.

5Press (START/COPY/SET).

¡The unit will print an information list.

6Press (MENU).

PRINTING

MODE=OFF [Ÿÿ]

RING DETECTION

SYSTEM SET UP

How the unit will answer in each receive mode

■ ANS/FAX mode: When a distinctive ringing pattern that matches your selection is detected, the unit will

automatically answer the line and activate the fax function to receive documents.

If other ringing patterns are received, the unit will activate the fax function or the

answering system depending on the call.

■ TEL/FAX mode: When a distinctive ringing pattern that matches your selection is detected, the unit will

automatically answer the line and activate the fax function to receive documents.

If other ringing patterns are received, the unit will ring until you answer the call.

■ TEL mode: In this mode, you have to answer all calls manually.

■ FAX (FAX ONLY)

mode: In this mode, the unit will answer all calls and activate the fax function.

Note:

¡The unit automatically answers a distinctive ring call after the second ring. To change the number of rings,

change the FAX (FAX ONLY) mode ring count (see page 55) after setting the ringing pattern.

(MENU)

(START/COPY/SET)

Dial keypad

43

Advanced

Operations

Answering device

Recording your own greeting messages

The recording time is limited to 16 seconds for each message. Record your message within 12 seconds for

optimum performance.

¡As for the ANS/FAX greeting message, you can choose either 16 seconds or 60 seconds of recording time

(see page 66).

ANS/FAX greeting message

TEL/FAX greeting message

Message transfer greeting message

“This is (your name, business and/or telephone number). We are

unable to answer right now. To send a fax, start transmission. To

leave a message, speak after the beep. Thank you.”

“This is (your name, business and/or telephone number). Please

wait for someone to answer your call. To send a fax, start

transmission.”

“This is a transferred message from (your name, business and/or

telephone number). Please enter your remote ID for remote

operation.”

Note:

¡If you do not record any messages, pre-recorded messages will be played (see pages 25 and 45).

1Open the station key panel.

2Press (SELECT) until the following is displayed.

■ For the ANS/FAX greeting:

Display:

■ For the TEL/FAX greeting:

■ For the message transfer greeting:

3Press (REC).

¡A long beep will sound.

4Speak clearly 20 cm (8 inches) away from the

microphone.

¡The display will show the elapsed recording time.

Example: ANS/FAX greeting

5When finished, press (STOP).

¡The unit will repeat your message. Adjust the

volume using (VOLUME).

ANS REC. 02s

TRNS-GREETING

TEL-GREETING

ANS-GREETING

Note:

¡If you make a mistake while recording, repeat

from step 2.

(SELECT)

Microphone

(STOP)

(VOLUME)

(REC)

Station

key panel

Suggested messages

Recording a greeting message

44

Erasing your own recorded greeting messages

1Open the station key panel.

2Press (SELECT) until the desired greeting is

displayed.

Example: Message transfer greeting

Display:

3Press (ERASE).

4Press (START/COPY/SET).

5Press (STOP).

GREETING ERASED

YES:PRESS SET

ERASE OK?

TRNS-GREETING

Station

key panel

(SELECT)

(ERASE)

(STOP)

(START/COPY/SET)

Checking the greeting messages

1Open the station key panel.

2Press (SELECT) until the desired greeting is

displayed.

Example: ANS/FAX greeting

Display:

3Press (CHECK).

¡After the beep, the unit will play back the

message. Adjust the volume using (VOLUME).

ANS-GREETING

(SELECT)

(CHECK)

(VOLUME)

Station

key panel

Note:

¡If you erase your own recorded greeting messages,

the pre-recorded greeting messages will be played.

Recording your own greeting messages (cont.)

45

Advanced

Operations

Transferring incoming call messages

This feature allows your unit to call a designated telephone or pager number each time an incoming voice

message is recorded.

You can choose Message transfer or Pager call.

Message transfer: Program the transfer telephone number first. When an incoming message is recorded in

your unit, the message will be transferred. You can retrieve the message during the same call by the remote

operation.

Pager call: Program the pager number first. When an incoming call is recorded, your pager will be called.

Call your unit and retrieve the message by the remote operation.

—This feature operates in the ANS/FAX mode.

—For details on the remote operation, see page 47.

—Use a touch tone telephone to access your unit.

Your unit dials the transfer telephone number or pager number.

The transferred telephone rings, then

answers the call.

Your unit will play the message

transfer greeting. \

Enter the remote operation ID (see

page 48).

Retrieve the message by the remote

operation.

Your pager beeps.

Call your unit to retrieve the message

by the remote operation.

\The unit has a pre-recorded message

transfer greeting.

—

“This is a telephone answering system.

Please enter your remote ID for remote

operation.”

Message transfer Pager call

within 60 seconds

An incoming voice message is recorded in memory.

Transferring incoming call messages (cont.)

46

1 2 3

4 5 6

7 8 9

0

1Press (MENU).

Display:

2Press K, then F @.

3Press (START/COPY/SET).

4Press or to select the desired setting.

MESSAGE: transfers incoming messages.

PAGER: calls your pager.

OFF: turns off this feature.

5Press (START/COPY/SET).

6a: If you selected “MESSAGE” in step 4:

Enter the transfer telephone number.

b: If you selected “PAGER” in step 4:

Enter your pager number.

b: ¡If this feature does not work properly, press

(REDIAL/PAUSE) more than once at the end

of your pager number to extend the paging

time.

b: ¡If you wish to display a message on your

pager, enter the message after your pager

number and (REDIAL/PAUSE).

Programming methods may vary depending

on the pager company. Call your pager

company for details.

b: ¡You may enter a total of 46 digits and/or

pauses.

7Press (START/COPY/SET).

8Press (MENU).

NO.=

MODE=OFF [Ÿÿ]

MESSAGE TRANSFER

SYSTEM SET UP

Note:

¡This feature can be turned on/off remotely from a

touch tone telephone (see page 51).

(MENU)

(START/COPY/SET)

Dial keypad

(REDIAL/PAUSE)

Setting the message transfer/pager call

47

Advanced

Operations

51

50

50

51

51

51

Operating the answering device from a remote

telephone

The following operations can be performed from a remote location using a touch tone telephone.

Set the unit to ANS/FAX in the AUTO RECEIVE mode before going out (see page 24).

Skips the greeting message

Repeats a message

Skips a message

New message playback

All message playback

Room monitor

Re-records a greeting message

51

49

49

49

49

50

51

Stops re-recording of a greeting

message

Erases a specific message

Erases all messages

Changes to the TEL mode

Turns on message transfer/

pager call for incoming

messages

Turns off message transfer/

pager call for incoming

messages

Dial key Remote command Page Dial key Remote command Page

Remote operation card

Please cut out and carry this card for assistance when using the remote operation.

Fold here

1. Call your unit.

2. Enter the remote operation ID

∆∆∆ during the greeting

message.

3. Press the remote command

key(s) (see the reverse side)

within 4 seconds.

or

Wait for 4 seconds. All the

recorded messages will be

played back.

¡The remote operation is

available only from a touch tone

telephone when the unit is in the

ANS/FAX mode.

¡When the unit is in the TEL

mode, call your unit and wait for

15 rings.

The answering system will

temporarily answer the line.

Enter the remote operation ID

during the greeting message.

The unit will switch to the

ANS/FAX mode.

¡When you press any key, press

firmly.

¡To send a document, press

JI. When a fax tone is heard,

start transmission.

Notice of Remote Operation

Answering Device Remote

Operation

48

Operating the answering device from a remote

telephone (cont.)

1 2 3

4 5 6

7 8 9

0

Programming the remote operation ID

The remote operation ID is used to access the answering device.

Choose any 3-digit number except a number using digits 0 or 7.

1Press (MENU).

Display:

2Press K, then A A.

3Press (START/COPY/SET).

4Enter the desired number.

5Press (START/COPY/SET).

6Press (MENU).

ID=111

REMOTE ANS ID

SYSTEM SET UP

(MENU)

(START/COPY/SET)

Dial keypad

Remote Command

Skips the greeting

message

Repeats a message

Skips a message

New message playback

All message playback

Room monitor

Re-records a greeting

message

Key

`

A

B

D

E

F

G

Remote Command

Stops re-recording of a

greeting message

Erases a specific

message

Erases all messages

Changes to the TEL mode

Message transfer/

Pager call ON

Message transfer/

Pager call OFF

Key

I

JD

JE

H@

HA

HB

49

Advanced

Operations

Listening to messages

1Call your unit.

2Enter the remote operation ID during the ANS/FAX

greeting playback.

—The voice guide will tell you the number of new

recorded messages.

3Press Dto listen to the new recorded messages.

OR

Press Eor wait for 4 seconds to listen to all of the

recorded messages.

Voice guide example:

3 new messages.

■ To repeat a message

■ Press Ato play the current message.

■ —If you press Awithin 5 seconds of the beginning of a message, the previous message will be played.

■ To skip a message

■ Press B.

During playback

■ Note:

■ ¡If the voice guide prompts you that memory is full

after playing the message, erase some or all of the

messages.

Sorry, no more memory. Please erase

unnecessary messages.

Voice guide example:

50

Operating the answering device from a remote

telephone (cont.)

■ To erase a specific message

■ Press J D while listening to the message you want

to erase.

■ —A long beep and the voice guide will be heard.

Then the unit will continue with the next message.

■ To erase all messages

Erasing incoming messages from memory

■ Press J E to erase all messages.

—A long beep and the voice guide will be heard.

Voice guide example:

Voice guide example:

■ To monitor the room sound

■ You can monitor the sound in the room where the unit is installed.

Press F.

—You can monitor the room sound for about 30 seconds.

■ Note:

■ ¡After 30 seconds, a beep sounds. To continue monitoring, press Fagain within 10 seconds.

Other remote operations

The message has been erased.

All messages have been erased.

■ To record a marker message

■ After playing back the recorded messages, you can leave an additional message.

■ 1. Wait for the voice guide to tell you that the

remote operation has ended.

■ 2. Wait about 10 seconds until the voice guide is

played.

■ 3. Leave a message after the beep.

Voice guide example:

All messages have been played.

Please leave your name and message

after the beep.

51

Advanced

Operations

■ To re-record a greeting message

■ You can change the contents of the greeting messages for the ANS/FAX mode.

1. Press Gto start recording.

¡A long beep will sound.

■ 2. Speak clearly up to 16 seconds.

¡If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from

step 1 within 10 seconds.

■ 3. When finished, press I.

¡The new greeting message will be played.

■ To skip the greeting message

■ Press @during the greeting message playback.

—The unit will skip the rest of the greeting message.

■ Press H B to turn OFF the message transfer/pager

call.

■ —If a transfer telephone number or a pager number

is not programmed, you cannot turn this feature

ON. The voice guide will prompt you.

■ To turn the message transfer/pager call on or off

■ You can remotely turn this feature on or off. You must pre-program a transfer telephone number or a pager

number (see page 46).

■ Press H A to turn ON the message transfer/pager

call.

¡The unit will activate the previous setting.

For example:

When turning this feature ON from a remote

telephone, message transfer will be activated if

message transfer is set to ON beforehand, or pager

call will be activated if pager call is set to ON

beforehand.

Voice guide example:

Message transfer is set.

Transfer phone number is 123456789.

or

Pager call is set.

Pager number is 098765432.

Transfer phone number is not set.

or

Pager number is not set.

Message transfer is off.

or

Pager call is off.

■ To change to the TEL mode

■ You can change the setting of the receive mode from ANS/FAX to TEL from a remote location.

1. Call your unit.

■ 2. Enter your remote operation ID.

■ 3. Press H @.

52

1 2 3

4 5 6

7 8 9

0

OFF (pre-selected)

92%

72%

Letter

Legal

Letter

Letter

Letter

Letter, A4, Legal

A4

Legal

Size of original documentSize of recording paperMode

Making a reduction copy

When you copy documents that are longer than the recording paper, the unit can reduce the original document

and print it out on one page by programming a suitable reduction rate. The reduction rate is determined by a

combination of the size of the recording paper and original document.

■Recommended reduction rate:

To program a reduction rate, proceed as follows:

1Press (MENU).

Display:

2Press K, then C E.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

Note:

¡If the appropriate reduction rate is not programmed,

the document may be divided and the top of the

second sheet will be deleted.

MODE=OFF [Ÿÿ]

COPY REDUCTION

SYSTEM SET UP

Letter= 216 q279 mm (81/2w q 11w)

Legal = 216 q356 mm (81/2w q 14w)

A4 = 210 q297 mm (May not be available in the United States.)

(MENU)

(START/COPY/SET)

Dial keypad

Enhanced copy features

Code

#21

#22

#23

#25

#26

#30

#31

#35

#36

#39

#41

#42

#43

#44

#46

#47

#54

#60

#67

#70

#79

#80

Page

Preselected setting Available settingsFeature

LOGO POSITION

JOURNAL AUTO PRINT

OVERSEAS MODE

DELAYED TRANSMISSION

AUTO CALLER LIST

SILENT FAX RECOGNITION RING

RING DETECTION

COPY REDUCTION

RECEIVE REDUCTION

LCD CONTRAST

REMOTE FAX ACTIVATION CODE

MESSAGE ALERT

RECORDING TIME ALERT

RECEIVE ALERT

FRIENDLY RECEPTION

FAX VOICE GUIDANCE

GREETING MESSAGE RECORDING

TIME

MESSAGE TRANSFER

ICM MONITOR

FAX PAGER

FILM DETECTION

SET DEFAULT

OUT, IN

ON, OFF

ON, OFF

ON, OFF

ON, OFF

3–6 rings

OFF, A, B, C, D

92%, 72%, OFF

92%, 86%, 72%, OFF

NORMAL, DARKER

ON, OFF

ON, OFF

ON, OFF

ON, OFF

ON, OFF

ERROR, ON, OFF

16s, 60s

OFF, MESSAGE, PAGER

ON, OFF

ON, OFF

ON, OFF

YES, NO

OUT

ON

OFF

OFF

ON

3 rings

OFF

OFF

92%

NORMAL

ON/CODE=U9

OFF

OFF

ON

ON

ON

16s

OFF

ON

OFF

ON

NO

59

71

60

39

73

57

42

52

61

62

41

63

63

64

64

65

66

46

66

67

68

69

Page

13

14

15

71

29

54

55

31

56

57

48

58

86

Preselected setting Available settingsCode Feature

#01

#02

#03

#04

#05

#06

#07

#08

#09

#10

#11

#13

#14

SET DATE & TIME

YOUR LOGO

YOUR TELEPHONE NUMBER

PRINT TRANSMISSION REPORT

AUTO RECEIVE MODE

ANS/FAX RING COUNT

FAX RING COUNT

MANUAL RECEIVE MODE

TEL/FAX DELAYED RING

RECORDING TIME

REMOTE ANS ID

DIALING MODE

PC LINK

ERROR, ON, OFF

ANS/FAX, FAX

1–4 rings, TOLL SAVER, RINGER OFF

1–4 rings

TEL, TEL/FAX

1–4 rings

VOX (unlimited), 1 MIN

AUTO, TONE, PULSE

ON, OFF

OFF

ANS/FAX

2 ring

2 ring

TEL

2 ring

VOX

ID=111

AUTO

ON

53

Special Settings

Summary of user programmable features

Basic features

Advanced features

Special Settings

Setting the ANS/FAX mode ring count

This feature determines the number of rings after which the unit answers a call in the ANS/FAX mode.

You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF.

TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any

new voice messages. If the unit answers on the second ring, there is at least one new

recorded message. If the unit answers on the fourth ring, there are no new recorded

messages. To save the toll charges for the call, hang up immediately when you hear the third

ring. The third ring indicates that there are no new messages.

RINGER OFF: The unit will answer without ringing.

Helpful hints:

¡To answer a call before the unit does, increase the number of rings.

¡If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease

the number of rings.

54

123

456

789

0

1Press (MENU).

Display:

2Press K, then @ F.

3Press (START/COPY/SET).

4Press or to select the desired number.

5Press (START/COPY/SET).

6Press (MENU).

RING=2 [ML]

ANS/FAX RING

SYSTEM SET UP Dial keypad (MENU)

(START/COPY/SET)

1 2 3

4 5 6

7 8 9

0

55

Special Settings

Setting the FAX (FAX ONLY) mode ring count

This feature determines the number of rings after which the unit answers a call in the FAX (FAX ONLY) mode.

You can choose from 1 to 4 rings.

Helpful hints:

¡To answer a call before the unit does, increase the number of rings.

¡If you have difficulty in receiving faxes from machines that have an automatic transmission feature, decrease

the number of rings.

1Press (MENU).

Display:

2Press K, then @ G.

3Press (START/COPY/SET).

4Press or to select the desired number.

5Press (START/COPY/SET).

6Press (MENU).

RING=2 [ML]

FAX RING

SYSTEM SET UP

(START/COPY/SET)

(MENU)

Dial keypad

56

Setting the TEL/FAX mode ring count

This feature determines the number of rings after which the unit automatically answers a call in the TEL/FAX

mode.

You can choose from 1 to 4 rings.

1Press (MENU).

Display:

2Press K, then @ I.

3Press (START/COPY/SET).

4Press or to select the desired number.

5Press (START/COPY/SET).

6Press (MENU).

RING=2 [ML]

TEL/FAX RING

SYSTEM SET UP

Note:

¡If you increase the number of rings, you may not be

able to receive documents from some older types of

facsimile machines.

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

57

Special Settings

Setting the silent fax recognition ring count

When a fax call is received in the TEL/FAX mode, the unit will automatically activate the fax function without

ringing. If the unit detects a voice call, it will ring. If a voice call is not answered within the selected number of

rings (3 to 6 rings), the unit will switch back to the fax mode. This is for machines that do not send a calling

tone.

1Press (MENU).

Display:

2Press K, then C @.

3Press (START/COPY/SET).

4Press or to select the desired number.

5Press (START/COPY/SET).

6Press (MENU).

RING=3 [ML]

SILENT FAX RING

SYSTEM SET UP

Note:

¡If you increase the number of rings, you may

not be able to receive documents from some

older types of facsimile machines.

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

1 2 3

4 5 6

7 8 9

0

Changing the caller’s recording time

You can choose from two lengths of recording times for an incoming message.

VOX (unlimited): The unit records an incoming message as long as the caller talks (pre-selected setting).

1 MIN (1 minute): The unit will record each incoming message up to 1 minute.

1Press (MENU).

Display:

2Press K, then A @.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=VOX [ÿŸ]

RECORDING TIME

SYSTEM SET UP (MENU)

Dial keypad

(START/COPY/SET)

58

Setting the dialing mode

If this feature is set to AUTO, the unit will automatically set the dialing mode to TONE or PULSE when the unit

is turned on.

If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below:

1Press (MENU).

Display:

2Press K, then A C.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=AUTO [Ÿÿ]

DIALING MODE

SYSTEM SET UP

Note:

¡If you change the dialing mode setting to TONE or

PULSE, set the dialing mode again when you change

the line service.

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

59

Special Settings

Changing the logo print position

The logo, telephone number, date, time and page number will be printed on the transmitted document from

your unit in the following manner:

OUT: Outside of the transmitted document’s paper size (pre-selected setting).

IN: Inside of the transmitted document’s paper size.

1Press (MENU).

Display:

2Press K, then B A.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=OUT [Ÿÿ]

LOGO POSITION

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

60

Sending documents overseas

You may experience difficulty in transmitting documents overseas. This feature makes sending documents

easier as the transmission speed is slowed down. Before starting transmission, follow the steps below:

1Press (MENU).

Display:

2Press K, then B C.

3Press (START/COPY/SET).

4Press or to select “ON”.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

OVERSEAS MODE

SYSTEM SET UP

Note:

¡After transmission, this feature will turn off

automatically.

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

61

Special Settings

OFF

92%

(pre-selected)

86%

72%

Legal

Letter

Legal

Letter

Letter

Letter, A4

Letter

Legal

A4

Legal

Size of original documentSize of recording paperMode

Receiving oversized documents

When the size of the documents sent by the other party is as large as or larger than the recording paper, the

unit can reduce each page of the document and print it out on the recording paper by programming a suitable

reduction rate.

The reduction rate is determined by a combination of the size of the recording paper and received document.

■Recommended reduction rate:

To program a reduction rate, proceed as follows:

1Press (MENU).

Display:

2Press K, then C F.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=92% [Ÿÿ]

RX REDUCTION

SYSTEM SET UP

Letter= 216 q279 mm (81/2w q 11w)

Legal = 216 q356 mm (81/2w q 14w)

A4 = 210 q297 mm (May not be available in the United States.)

Note:

¡Documents received by facsimile frequently have a heading on the top of each page which contains the

sender’s name/telephone number. This increases the length of each page. Therefore, it is recommended to

use the reduction mode.

¡If the appropriate reduction rate is not programmed, the document will be divided.

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

62

Changing the display contrast

Use this feature to adjust the brightness of the display.

NORMAL: (Pre-selected setting)

DARKER: Used when the display contrast is too light.

1Press (MENU).

Display:

2Press K, then C I.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=NORMAL [Ÿÿ]

LCD CONTRAST

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

63

Special Settings

1 2 3

4 5 6

7 8 9

0

Setting the message alert

When this feature is on, the unit will let you know with a slow beep that a caller’s message has been recorded.

1Press (MENU).

Display:

2Press K, then D B.

3Press (START/COPY/SET).

4Press or to select “ON”.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

MESSAGE ALERT

SYSTEM SET UP (MENU)

Dial keypad

(START/COPY/SET)

1 2 3

4 5 6

7 8 9

0

Setting the recording time alert

With this feature, when the remaining time to record incoming messages becomes less than 60 seconds, the

unit will alert the user with a slow beep.

1Press (MENU).

Display:

2Press K, then D C.

3Press (START/COPY/SET).

4Press or to select “ON”.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

REC. TIME ALERT

SYSTEM SET UP (MENU)

Dial keypad

(START/COPY/SET)

64

Setting the friendly reception

The friendly reception feature allows you to receive fax documents automatically without pressing

(START/COPY/SET). See page 23 for further details.

If you set this feature to OFF, you have to press (START/COPY/SET) to receive fax documents each time you

answer a call.

1Press (MENU).

Display:

2Press K, then D F.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

FRIENDLY RCV

SYSTEM SET UP

Setting the memory reception alert

When received documents are stored into memory, the unit will alert you with beep tones. If you hear slow

beeps, clear the printing problem or supply paper to print the stored documents. The beep tones will stop.

1Press (MENU).

Display:

2Press K, then D D.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

RECEIVE ALERT

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

Note:

¡If you set the fax voice guidance feature to

OFF (see the next page), you cannot hear

the friendly reception message.

65

Special Settings

1 2 3

4 5 6

7 8 9

0

Setting the fax voice guidance

One of the following choices is available (see pages 20 and 23).

ON: The voice guidance message regarding fax transmission/reception and friendly reception will be

heard after every transaction (pre-selected setting).

OFF: The fax voice guidance will not be heard.

ERROR: The fax voice guidance will be heard only when fax transmission/reception and friendly reception fail.

1Press (MENU).

Display:

2Press K, then D G.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

FAX GUIDANCE

SYSTEM SET UP (MENU)

(START/COPY/SET)

Dial keypad

66

1 2 3

4 5 6

7 8 9

0

Changing the recording time for the ANS/FAX

greeting message

You can choose either 16 seconds or 60 seconds of recording time.

1Press (MENU).

Display:

2Press K, then E D.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=16s [Ÿÿ]

GREETING TIME

SYSTEM SET UP

(MENU)

Dial keypad

(START/COPY/SET)

Note:

¡If you change the greeting message time to

60 seconds, we recommend that you inform

the caller in the ANS/FAX greeting message

to press *9 before starting fax transmission.

¡If you change the greeting message time to

16 seconds from 60 seconds, your recorded

ANS/FAX greeting message will be deleted.

Re-record a greeting message (see page 43).

1 2 3

4 5 6

7 8 9

0

Setting the ICM monitor

When a call is received with the answering device, the incoming message will be heard from the speaker

during the call. If you do not wish the message to be heard by other persons who share your unit, set this

feature to OFF.

1Press (MENU).

Display:

2Press K, then F G.

3Press (START/COPY/SET).

4Press or to select “OFF”.

¡If this feature is required, select “ON”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=OFF [Ÿÿ]

MODE=ON [Ÿÿ]

ICM MONITOR

SYSTEM SET UP

(MENU)

Dial keypad

(START/COPY/SET)

67

Special Settings

1 2 3

4 5 6

7 8 9

0

Signaling your pager that you have received a fax

document

This feature allows your unit to call your pager when your unit receives a fax message.

1Press (MENU).

Display:

2Press K, then G @.

3Press (START/COPY/SET).

4Press or to select “ON”.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Enter your pager number.

¡If this feature does not work properly, press

(REDIAL/PAUSE) more than once at the end of

your pager number to extend the paging time.

If you wish to display a message on your pager,

enter the message after your pager number and

(REDIAL/PAUSE).

Programming methods may vary depending on

the pager company. Contact your pager company

for details.

¡You can enter a total of 46 digits and/or pauses.

7Press (START/COPY/SET).

8Press (MENU).

Note:

¡This feature is not available when the receive mode is

set to the TEL mode.

NO.=

MODE=ON [Ÿÿ]

MODE=OFF [Ÿÿ]

FAX PAGER

SYSTEM SET UP

(MENU)

Dial keypad

(START/COPY/SET)

(REDIAL/PAUSE)

68

Setting the film detection

If this feature is activated, the display will show the following message when the remaining film prints approx.

15 letter size documents:

Display:

¡If you are using regular film (100 m roll), the unit will also print a report.

FILM NEAR EMPTY

1Press (MENU).

Display:

2Press K, then G I.

3Press (START/COPY/SET).

4Press or to select the desired setting.

¡If this feature is not required, select “OFF”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

FILM DETECTION

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

69

Special Settings

1 2 3

4 5 6

7 8 9

0

Resetting the advanced features

Use this feature to return the advanced features (see page 53) to their initial settings.

1Press (MENU).

Display:

2Press K, then H @.

3Press (START/COPY/SET).

4Press or to select “YES”.

5Press (START/COPY/SET).

¡If this feature is not required, press (STOP).

6Press (START/COPY/SET) again for confirmation.

7Press (MENU).

RESET COMPLETED

RESET OK?

RESET=YES [Ÿÿ]

RESET=NO [Ÿÿ]

SET DEFAULT

SYSTEM SET UP

Dial keypad (MENU)

(STOP)

(START/COPY/SET)

70

1 2 3

4 5 6

7 8 9

0

Printing reports and lists

You can print out the following reports/lists from your unit:

Feature list—provides you with the current settings of the basic and advanced programming features (see

page 53).

Telephone number list—provides you with telephone numbers and their station names which are stored in

automatic dialing. Telephone number codes are as shown below:

P: A pause has been entered.

F: A flash has been entered.

[ ]: A secret telephone number has been entered. (The telephone number is not printed.)

Journal report—keeps records of fax transmissions and receptions (see page 72 for a sample of the report).

This report will be printed automatically after every 35 fax communications, but also can be printed manually.

You can change the setting of the journal auto print feature (see page 71).

Printer test list—allows you to check the print quality of your unit. If the test print has a dirty pattern or blurred

points or lines, clean the thermal head (see page 101).

Transmission report—provides you with a printed record of the fax transmission result (see pages 71 and

72).

Caller list—is useful for keeping a record of the last 35 callers after subscribing to Caller ID service (see page

73).

How to print reports and lists

1Press (MENU) until the following is displayed.

Display:

2For the feature list, press K, then A.

For the telephone number list, press K, then C.

For the journal report, press K, then D.

For the printer test list, press K, then E.

For the caller list, press K, then H.

3Press (START/COPY/SET) to start printing.

¡To interrupt printing, press (STOP).

4After printing, press (MENU).

PRINTING

CALLER LIST

PRINTER TEST

JOURNAL REPORT

TEL NO. LIST

SETUP LIST

PRINT LIST

(MENU)

(START/COPY/SET)

Dial keypad

(STOP)

71

Special Settings

Setting the transmission report printing

One of the following choices is available:

ERROR: The transmission report will print out only when fax transmission fails.

ON: The report will always print out, indicating whether fax transmission is successful or not.

OFF: The report will not print (pre-selected setting).

1Press (MENU).

Display:

2Press K, then @ D.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=OFF [Ÿÿ]

TX-REPORT MODE

SYSTEM SET UP

Setting the journal report to automatically print

This unit will automatically print a journal report after every 35 fax communications. After printing, the journal

report will still remain in memory and the oldest communication will be erased when a new communication

occurs.

When this feature is deactivated, the unit will store the records of the last 35 fax communications, but the unit

will not print the journal report automatically.

1Press (MENU).

Display:

2Press K, then B B.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

AUTO JOURNAL

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

72

CODE MEANINGPRINTED MESSAGE

Journal report sample

Transmission report sample

Communication messages on the report

When a problem has occurred, one of the following messages will be printed on the transmission and journal

reports:

COMMUNICATION ERROR

DOCUMENT JAMMED

ERROR-NOT YOUR UNIT

MEMORY FULL

NO DOCUMENT

OTHER FAX NOT

RESPOND

PRESSED THE STOP KEY

THE COVER WAS OPENED

OK

¡A transmission or reception error occurred. Try again or check with

the other party.

¡A document is jammed. Remove the jammed document (p. 98).

¡A transmission or reception error occurred because of the trouble

of the other party’s machine. Check with the other party.

¡The document was not received due to memory being full.

¡The document was not fed into the unit properly. Try again.

¡The receiving unit was busy or ran out of recording paper. Try

again.

¡The START/COPY/SET button was pressed when the document

was not set properly. Set the document properly and press the

START/COPY/SET button after confirming the fax tone.

¡The other party’s machine is not a facsimile. Check with the other

party.

¡The STOP button was pressed and fax communication was

canceled.

¡The front cover was opened during fax transmission.

¡Fax communication was successful.

41–72

FF

—

—

—

—

—

—

—

—

Jan. 25 1997 05:22PM

NO. OTHER FACSIMILE START TIME USAGE TIME MODE PAGES RESULT UCODE

01 1234567 Jan. 21 02:14PM 00'25 TX 01 OK

02 9998765 Jan. 21 02:17PM 00'38 TX 02 OK

03 2121444 Jan. 21 02:18PM 00'28 RX 01 OK

04 555556677 Jan. 22 10:35AM 00'58 TX 03 COMMUNICATION ERROR (43)

05 +987 1234 Jan. 22 11:02AM 01'50 TX 05 OK

RX 03 OK

JOURNAL

Jan. 20 1997 01:19PM

NO. OTHER FACSIMILE START TIME USAGE TIME MODE PAGES RESULT UCODE

01 1234567 Jan. 20 01:18PM 00'51 TX 00 COMMUNICATION ERROR (43)

XMT REPORT

Communication

messages

(See below.)

Error code

(for service

personnel

use only)

Printing reports and lists (cont.)

73

Special Settings

Setting the caller list to print automatically

This unit will automatically print a caller list after every 35 calls. After printing, the caller list will still remain in

memory and the oldest communication will be erased when a new communication is received.

1Press (MENU).

Display:

2Press K, then B F.

3Press (START/COPY/SET).

4Press or to select the desired setting.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

AUTO CALL. LIST

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

Caller list sample

Jan. 04 1997 04:37PM

NO. NAME TEL NO. TIME OF CALL ANSWER

01 ROGER DAVIS 345-3809 Jan. 01 02:35PM FAX

02 SHARON SMITH 103-2238 Jan. 02 08:35AM TAM

03 JOHN 345-3809 Jan. 02 02:35PM TEL

04 MIKE SHARON 103-5555 Jan. 04 08:45AM PC

CALLER LIST

¡The NAME/TEL NO./TIME OF CALL are received through a Caller ID Service (see page 17).

¡ANSWER: How the call was received by the unit.

—FAX: facsimile

—TAM: telephone answering machine

—TEL: telephone

—PC: Received on your PC.

When nothing is shown, there was no response.

74

Preparation

Connecting to a computer

To run the Multi-Function Center software, you need the following software and hardware.

¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended).

¡Microsoft Windows 3.1, 3.11 or Windows 95.

¡Hard Disk drive with at least fourteen (14) MB of available storage.

¡RS232C Serial Port.

Features

The Multi-Function Center is an application that allows you to use your facsimile unit as a printer, scanner and

copier with Windows.

Printer functions

¡Printing documents from a Windows application (See page 76.)

¡Printing received documents (See page 82.)

Fax functions

¡Faxing from a Windows application (See page 78.)

¡Faxing a document on the facsimile unit (See page 83.)

¡Viewing received faxes on the PC screen (See page 81.)

Scanner functions

¡Scanning and saving documents (See page 85.)

*To order a KX-FA180, call toll free 1-800-332-5368.

The RS232C (DB9 Female/DB25 Male) serial cable can also be purchased at a

computer supply store. If you need help finding the correct cable, call 1-800-435-7329.

KX-FA180 or a RS232C cable

(not included)

Multi-Function Center

To COM port

25 Pin Male

25 Pin Adaptor

9 Pin Female

OR

75

Multi-Function

Center

Installing the Multi-Function Center software

1Start Windows 3.1/3.11/95 and close all

applications.

2Insert disk #1 into disk drive A (or B).

3For Windows 95 users:

Click Start and select Run... .

For Windows 3.1 or 3.11 users:

From the Program Manager, click File and

select Run... .

4At the command line, type “a(or b):\setup” and

click OK.

5Follow the instructions on the screen until all

diskettes (disk #2,disk #3) have been

installed.

6Remove the disk from the disk drive and click

Finish to reboot your PC.

For Windows 3.1

For Windows 95

Included applications

The Multi-Function Center contains the following applications and files.

»Viewer Enables you to scan a new image or open an existing image, and then print, fax or edit

that image.

»Copier Enables you to copy after scanning a document on the facsimile unit, setting the

reduction, etc., from your PC.

»Launch Pad Enables you to launch any Windows application with a single mouse click.

»Send From Fax Enables you to fax a document placed on the facsimile.

»Address Book Enables you to list your personal information database for fax and telephone numbers.

»Finder Enables you to access your faxes and scanned documents by the File Name and Key

phrases.

»Message Center Enables you to manage all incoming and outgoing fax messages and print jobs. The

Message Center application contains five windows that may remain open or be

minimized to one icon within the Message Center main window.

»Register Used to register your unit with Panasonic by fax, mail, telephone or E-mail.

»ReadMe Please read this file before using the Multi-Function Center software.

»Upgrade Now! Information for a Multi-Function Center upgrade.

Note:

¡If other communication software which uses the serial port has been installed, the communication setting

may be changed and the communication software may not function properly when the Multi-Function Center

software is installed.

76

Printing/faxing from a Windows application

Printing documents from a Windows application

You can print documents created from a Windows application.

Select Panasonic MFC Print as your printer.

For example, to print from Microsoft Word, proceed as follows.

For Windows 95 Users:

1Open the document you wish to print.

2Select Print from the File menu.

¡The Print dialog box will appear.

3Select Panasonic MFC Print from the Name field

in the Printer group. <Fig. 1>

4Set the Page range and enter the number of

collated copies.

5Select the Properties button.

¡The Panasonic MFC Print dialog box will appear.

<Fig. 2>

6Set the Page Size, Resolution and Orientation.

Then click the OK button.

7Click the OK button on the Print dialog box.

<Fig. 1>

<Fig. 2>

77

Multi-Function

Center

For Windows 3.1/3.11 Users:

1Open the document you wish to print.

2Select Print from the File menu.

¡The Print dialog box will appear. <Fig. 1>

3Select the Setup button.

¡The Print Setup dialog box will appear.

4Select Panasonic MFC Print from the Specific

Printer field. <Fig. 2>

5Select the Options button.

¡The Panasonic MFC Print dialog box will appear.

<Fig. 3>

6Set the Page Size, Resolution and Orientation.

Then click the OK button.

7Click the OK button on the Print Setup dialog box.

8Click the OK button on the Print dialog box.

<Fig. 1>

<Fig. 2>

<Fig. 3>

78

Faxing from a Windows application

You can access the fax function from a Windows application by using the Print command in the File menu.

Select Panasonic MFC Fax as your printer.

To send a document created from Microsoft Word, proceed as follows:

For Windows 95 Users:

1Open the document you wish to send.

2Select Print from the File menu.

¡The Print dialog box will appear.

3Select Panasonic MFC Fax from the Name field in

the Printer group and select Properties. <Fig. 1>

¡The Panasonic MFC Fax dialog box will appear.

<Fig. 2>

4Set the Page Size, Resolution and Orientation.

Then click the OK button.

5Click the OK button on the Print dialog box.

¡The Fax Send dialog box will appear. <Fig. 3>

6Enter the name and fax number using the

keyboard or select the desired entry in the address

book currently displayed in the Address Book

name box.

7Select the Start button in the Fax Send dialog box.

Note:

¡If the line is busy or there is no answer, the Message

Center Outbox application will automatically redial the

number up to 5 times.

¡To cancel transmission after dialing:

Press (STOP) on the facsimile unit.

OR

Select the Outbox window in the Message Center

window. Then select the CANCEL button on the

toolbar.

<Fig. 1>

<Fig. 3>

<Fig. 2>

Printing/faxing from a Windows application (cont.)

79

Multi-Function

Center

For Windows 3.1/3.11 Users

1Open the document you wish to send.

2Select Print from the File menu.

3Select the Setup button.

¡The Setup dialog box will appear.

4Select Panasonic MFC Fax from the Specific

Printer field and then select Options. <Fig. 1>

¡The Panasonic MFC Fax dialog box will appear.

<Fig. 2>

5Set the Page Size, Resolution and Orientation.

Then click the OK button.

6Click the OK button on the Print Setup dialog box.

7Click the OK button on the Print dialog box.

¡The Fax Send dialog box will appear. <Fig. 3>

8Enter the name and fax number using the

keyboard or select the desired entry in the address

book currently displayed in the Address Book

name box.

9Select the Start button in the Fax Send dialog box.

Note:

¡If the line is busy or there is no answer, the Message

Center Outbox application will automatically redial the

number up to 5 times.

¡To cancel transmission after dialing:

Press (STOP) on the facsimile unit.

OR

Select the Outbox window in the Message Center

window, and then select the CANCEL button on the

toolbar.

<Fig. 1>

<Fig. 3>

<Fig. 2>

80

Receiving faxes on your PC

Setup for receiving faxes on your PC

Status messages

Complete—The facsimile was received successfully but has not been printed, saved or viewed yet.

Incomplete—An incomplete facsimile was received and has not been printed, saved or viewed yet.

Recovered—The system failed before the facsimile was completely received and was entered in the

Inbox. Information in the Log may be incomplete. The facsimile may be incomplete.

Viewed—The facsimile has been viewed but not printed or saved.

Printed—The facsimile was printed but not saved.

Saved—The facsimile has been saved.

1For Windows 95 users:

Select the Start button. Point to Programs, then

Multi-Function Center, and then click Message

Center.

For Windows 3.1/3.11 users:

Double click the Message Center icon in the

Windows screen.

2Select the Inbox window from the Message

Center window.

¡The Inbox window displays the current status of

all facsimiles distributed to you in the Inbox

queue.

Viewing the list of faxes received

All faxes received by your PC are listed in the Inbox window in the Message Center application.

Inbox allows you to view, print or save faxes and append your faxes to other saved fax documents.

Date and Time Number of pages

received

Status messages

Fax ID (if

transmitted)

1If you wish to receive faxes on your PC

automatically, turn on AUTO RECEIVE mode on

the facsimile unit by pressing (AUTO\RECEIVE) or

use the MANUAL RECEIVE mode to set to

TEL/FAX.

2Start Windows.

3Open or minimize the Message Center

application.

To open the Message Center, follow these steps.

For Windows 95 users:

Select the Start button. Point to Programs, then

Multi-Function Center, and then click Message

Center.

For Windows 3.1/3.11 users:

Double click the Message Center icon in the Multi-

Function Center program group.

Windows 95

Windows 3.1

81

Multi-Function

Center

Viewing received faxes on the PC screen

To view a fax in your Inbox

1Select the fax you wish to view in the Inbox

window. <Fig. 1>

2Select View from the File menu of the Message

Center Inbox window or click the VIEW button on

the toolbar.

¡The Viewer application window will display the

selected fax. <Fig. 2>

VIEW button

PREVIEW button

To preview the first page of the

received fax

1Select the fax you wish to view in the Inbox

window. <Fig. 1>

2Select Preview from the File menu of the Message

Center Inbox window or click the PREVIEW button

on the toolbar.

¡The Preview window will display the first page of

the selected fax. <Fig. 3>

\If you are using Windows 3.1/3.11, the dialog

box images shown above will slightly differ

from the actual ones.

<Fig. 1>

<Fig. 2>

<Fig. 3>

Receiving faxes on your PC (cont.)

82

1Select the document you wish to print in the

Inbox window.

2Select Print from the File menu or the PRINT

button from the toolbar. <Fig. 1>

¡The Print dialog box will appear. <Fig. 2>

3If you want to change your selected printer or

print setup, select Setup.

¡The Print Setup dialog box will appear.

<Fig. 3>

4If you want to use the facsimile unit as a printer,

select Panasonic MFC print from the Printer

list.

5Choose the printer you wish to use, by selecting

the OK button.

6Enter the number of copies you want to print in

the Copies field, and then select the OK button.

¡The Inbox Print dialog box will appear.

<Fig. 4>

7Select the range of faxes you want to print from

the Inbox Print group.

A. Select Print Selected to print the facsimiles

you selected.

B. Select Print Unprinted to print all the

unprinted facsimiles.

C. Select Print All to print all the facsimiles.

8If you want to delete the selected faxes

automatically after they have been printed,

select the Delete After Printing check box.

9If you want the selected fax scaled to fit within

the size of paper you selected in the Print Setup

dialog box, select Scale To Fit.

10 Select the Print button.

Printing received documents

PRINT button

<Fig. 4>

<Fig. 1>

<Fig. 2>

<Fig. 3>

\If you are using Windows 3.1/3.11, the dialog box

images shown will slightly differ from the actual ones.

83

Multi-Function

Center

Faxing a document on the facsimile unit

1Place the document(s) on your fax machine.

<Fig. 1>

2For Windows 95 Users:

Select the Start button. Point to Programs, point

to Multi-Function Center, then click Send From

Fax.

For Windows 3.1/3.11 Users:

Double click Send From Fax in the Multi-Function

Center program group.

¡The Send From Fax application window will

appear. <Fig. 2>

3Enter the name and fax number using the

keyboard or select the desired entry in the address

book currently displayed in the Address Book

name box.

4You can access the Address Book application by

selecting Addr Bk... or the Address Book menu.

¡The Address Book application window will

appear.

5If you accessed the Address Book application,

select Exit from the File menu.

6Select the Start button in the Send From Fax

application window.

<Fig. 2>

FACE DOWN

\If you are using Windows 3.1/3.11, the dialog

box image shown above will slightly differ

from the actual one.

<Fig. 1>

Making an Address Book

The Address Book is your personal information database for fax and telephone numbers.

84

To make the Address Book:

1For Windows 95 Users:

Select the Start button. Point to Programs, point

to Multi-Function Center, then click Address

Book.

For Windows 3.1/3.11 Users:

Double click Address Book in the Multi-Function

Center program group.

¡An Address Book will be displayed. <Fig. 1>

2Click the File menu and select New.

¡A New dialog box will be displayed. <Fig. 2>

3Enter the File Name. Enter the Address Book

name. Click the OK button.

¡The Address Book is made.

To make an entry in the Address

Book:

1Click the Open button.

¡The open dialog box will be displayed. <Fig. 3>

2Select the desired Address Book and click the OK

button.

3Enter or edit the Name, Company, Fax No.,

Telephone No. and Notes.

4Click the Add button. <Fig. 4>

¡The entry will be added to the Address Book.

Broadcast

When sending the same document to more than one

location, you can use the list function in the Address

Book. You may select as many locations as you want

from the Address Book.

<Fig. 1>

<Fig. 2>

<Fig. 3>

\If you are using Windows 3.1/3.11, the dialog box

images shown will slightly differ from the actual ones.

<Fig. 4>

Add button

85

Multi-Function

Center

Scanning and saving documents

Your facsimile unit can be used as a scanner to enable you to incorporate image files into other Windows

applications. The scanned file can be saved as an .ALA (image) file, a .TIF, .PCX, .DCX, or .BMP file.

1Place the document(s) on your fax machine.

<Fig. 1>

2For Windows 95 Users:

Select the Start button. Point to Programs, point

to Multi-Function Center, and then click Viewer.

¡The Viewer application window will appear.

For Windows 3.1/3.11 Users:

Double click Viewer in the Multi-Function Center.

¡The Viewer application window will appear.

3Select Scan from the File menu. <Fig. 2>

¡The TWAIN Scanner dialog box will appear.

<Fig 3>

4Set the intensity and optimize for the type of

document you are scanning.

5Select Scan.

¡The scanned document is displayed in the

Viewer application window.

6Select Save As... from the File menu.

¡The Save As dialog box will appear. <Fig. 4>

7Enter the file name in the File name text box, and

then select the drive and directory where you want

to store the document.

8Select the OK button.

FACE DOWN

\If you are using Windows 3.1/3.11, the dialog box

images shown will slightly differ from the actual ones.

<Fig. 2>

<Fig. 3>

<Fig. 1>

<Fig. 4>

Note:

¡Text editing cannot be performed with this unit without

OCR upgrade software. See Upgrade Now!

86

Receiving faxes directly to your fax machine

If you do not want to be disturbed by incoming faxes when using the PC, but want to receive faxes directly to

your facsimile machine, set one of the following.

—Pause your Inbox on the PC

—Turn off the PC LINK on the facsimile unit

To pause your Inbox

From the Inbox window select Pause Inbox from the File menu or select the Pause Inbox check box on the

Toolbar.

To turn off the PC LINK on the facsimile unit

¡When this feature is off, any operation from your PC like fax transmission/reception, scanning, printing or

copying cannot be performed.

1Press (MENU).

Display:

2Press K, then A D.

3Press (START/COPY/SET).

4Press or to select “OFF”.

¡To turn on the PC LINK on the facsimile unit,

select “ON”.

5Press (START/COPY/SET).

6Press (MENU).

MODE=ON [Ÿÿ]

PC LINK

SYSTEM SET UP

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

(MENU)

Dial keypad

87

Multi-Function

Center

Getting help for further information

To obtain information about the Multi-Function Center applications, use the help function.

For help, follow these steps.

Editing images

¡Clearing portions of an image

¡Copying to the Windows Clipboard

¡Cropping images

¡Cutting images

¡Cutting or copying an entire image

¡Inverting the color of an image

¡Pasting from the Windows Clipboard

¡Stretching and shrinking images

¡Symmetrically changing the size of an image

Viewing Images

¡Adding an application button to the Action Bar

¡Arranging how windows and icons are displayed

¡Displaying thumbnails

¡Hiding or displaying the Toolbar, Status Bar or Action Bar

¡Magnification, reductions or orientations

¡Next or previous page

¡Rotating the image

¡Viewing different pages of a multiple page file

¡Zooming—Sizing the image to the size of the window

¡Zooming in a specified area of the image

¡Making a Copy

¡Making multiple copies

¡Reducing/enlarging your copy

¡Setting up your Copier

¡Choosing a printer

¡Changing address books

¡Copying Information into the clipboard

¡Dialing a voice number

¡Pasting information into your address book

¡Printing an address book entry or the entire book

¡Saving the address book as a file

¡Sending a cover page fax

¡Using editing key combinations to Cut, Paste, Copy and Undo editing

Viewer

Copier

Address Book

Applications Functions

For Windows 95 Users:

1. Click the Start button.

2. Click Programs.

3. Click Multi-Function Center.

4. Click the application you need help with.

5. Click Help menu.

6. Click Index or Contents and choose the

subject you need help with.

For Windows 3.1/3.11 Users:

1. In Program manager, double click

Multi-Function Center.

2. Double click the application you need help with.

3. Click Help menu.

4. Click Index or Contents and choose the

subject you need help with.

Functions of the Multi-Function Center applications

88

¡Cover page—Creating and Setting up

¡Setting Up Your Personal Information—PC Fax Logo, Telephone Number, and

Night Delivery Time

¡Time/Date stamp on received faxes

¡Resending a fax

¡Automatically printing incoming faxes

¡Loading the Message Center automatically

Received Faxes

¡Inbox Activity Log

¡Automatically deleting your faxes after printing

¡Deleting faxes

¡Stop receiving faxes on the PC

¡Manually receiving faxes

¡Monitoring the fax line status

¡Pausing and Resuming the Inbox so that you can run other communications

programs

¡Previewing a received fax listed in the Inbox window

¡Printing faxes

¡Saving faxes

¡Viewing the list of received faxes

¡Stamping received facsimiles with the time/date received

¡Viewing faxes

Sending Faxes

¡Viewing the list of outgoing faxes

¡Resending undelivered facsimiles

¡Changing the destination fax number or delivery schedule

¡Unsuccessful dialing attempts

Canceling Faxes

¡Pause and Resume sending facsimiles

¡Deleting facsimiles

¡Monitoring the Fax line status

¡Viewing the Outbox queue

¡Outbox Activity Log

¡Adding the current addressee to an Address Book

¡Changing Address Books

¡Choosing the Resolution

¡Phone Number (addressing your fax)

¡Sending a fax to multiple recipients (Specify To: Cc: Faxes)

¡Sending a fax while you are doing other work on your PC

¡Sending a fax with a cover page

¡Sending a fax without a cover page

¡Setting up your scanner

¡Sorting the Address Book

¡Specifying a distribution list as your fax destination

¡Deleting files

¡Printing, viewing and faxing files

¡Searching for files

¡Adding an application to your Launch Pad icon bar

¡Automatically activating the Launch Pad

¡Making your Launch Pad icon bar always visible on your desktop

¡Removing an application from the Launch Pad

Message Center

Send From Fax

Finder

Launch Pad

Applications Functions

Getting help for further information (cont.)

¡There is something wrong with the unit. Contact our service personnel (p. 104).

¡The front cover is open. Close it.

¡The document is not fed into the unit properly. Reinsert the document. If

misfeeding occurs frequently, clean the document feeder rollers inside the unit

(p. 101). If the problem remains, adjust the feeder pressure (p. 98).

¡The film cartridge is not inserted properly. Reinsert it correctly (p. 99, 100).

¡The recording paper set lever is released. Push it back to set the lever (p. 9).

¡Memory (telephone numbers, parameters, etc.) has been erased. Re-program.

¡The recording paper is not installed or the unit ran out of paper. Install paper

(p. 8).

¡The recording paper is not fed into the unit properly or has jammed near the

recording paper entrance. Clear the jammed paper (see “When paper has

jammed near the recording paper entrance” on page 97).

Do not install folded or heavily curled paper in the paper tray.

¡The unit has (a) document(s) in memory. See the other message instructions to

print out the document(s).

¡The memory is full of received documents due to a lack of recording paper or a

recording paper jam. Install paper or clear the paper jam.

¡The film is empty. Replace the film or film cartridge with a new one (p. 99, 100).

¡The film is slack. Tighten it (see step 8 on page 100) and install again.

¡The remaining film can print approx. 15 pages of letter size documents. Prepare a

new film or film cartridge (p. 6).

¡There is no room left in memory to record a voice message. Erase some or all of

the messages (p. 26, 50).

¡The receiving unit is busy or ran out of recording paper. Try again.

¡A recording paper jam occurred under the film cartridge. Clear the jammed paper

(p. 96).

89

Troubleshooting

and Routine Care

DISPLAY MESSAGE CAUSE & REMEDY

Error messages on the display

If the unit detects a problem, one or more of the following messages will appear on the display:

CHECK COVER

CHECK DOCUMENT

CHECK MEMORY

FAX MEMORY FULL

MESSAGE FULL

NO RESPONSE

PAPER JAMMED

CHECK FILM

CHECK LEVER

CHECK PAPER

FAX IN MEMORY

FILM EMPTY

FILM NEAR EMPTY

CALL SERVICE

Troubleshooting

(continued)

90

¡The fax function cannot be operated on the PC. The RS232C cable is not

connected correctly, or the software is not running on the PC.

¡The unit is checking if the film is set correctly. Wait for a while.

¡The other fax machine does not have a polling feature. Check with the other

party.

¡The receiving unit is busy or ran out of recording paper. Try again.

¡The document is jammed. Remove the jammed document (p. 98).

¡Attempted to transmit a document longer than 600 mm (235⁄8w). Press the STOP

button and remove the document (p. 98).

Divide the document into two or more sheets and try again.

¡There is too much paper on the paper stacker. Remove the printed paper. If the

display message still remains after removing the paper, a paper jam may have

occurred. Remove the jammed paper (see “When paper has jammed near the

recording paper exit” on page 97).

¡The starter film is empty. Replace the film or film cartridge with a new one

(p. 99, 100).

¡A transmission error occurred. Try again.

¡The unit is too hot. Let it cool down.

DISPLAY MESSAGE CAUSE & REMEDY

REMOVE DOCUMENT

TRANSMIT ERROR

STARTER FILM END

UNIT OVERHEATED

REMOVE PRINTOUT

REDIAL TIME OUT

POLLING ERROR

Error messages on the display (cont.)

PLEASE WAIT

PC FAIL OR BUSY

91

Troubleshooting

and Routine Care

For Assistance, Call 1-800-435-7329

CAUSE & REMEDYPROBLEM

Before requesting help

I cannot make and receive calls.

I cannot make calls.

The unit does not work.

The unit does not ring.

The REDIAL/PAUSE button does

not function properly.

The receive mode does not function

as explained on page 22.

During programming, I cannot enter

the remote fax activation code or

the remote operation ID.

¡The power cord or telephone line cord is not connected. Check the

connections (see page 10).

¡The dialing mode setting is wrong. Check the setting and change it

to TONE or PULSE (see page 58).

¡Disconnect the unit from the telephone line and connect to a

known working telephone. If the known working telephone

operates properly, call your service center to have the unit

repaired. If the known working telephone does not operate

properly, consult with your telephone company.

¡The ringer volume is set to OFF. Adjust to a suitable level (see

page 17).

¡If this button is pressed during dialing, a pause will be inserted. If

pressed immediately after a dial tone is obtained, the last number

dialed will be redialed.

¡A distinctive ringing pattern is set. Check it (see page 42).

¡All or part of the number is the same as another code or ID.

Change the number (see pages 41 and 48).

General

CAUSE & REMEDY

PROBLEM

Fax transmission

The other party complains that

letters on their received document

are distorted.

The other party complains that dirty

patterns or black lines appear on

their received documents.

I cannot make an international fax

call.

¡If your line has special telephone services such as call waiting, the

service may have been activated during fax transmission. Connect

the unit to a line that does not have such services.

¡An extension telephone on the same line is off the hook. Hang up

and try again.

¡The glass or rollers are dirty. Clean them (see page 101).

¡Use the overseas transmission mode (see page 60).

¡Add two pauses at the end of the telephone number (see page 37).

92

For Assistance, Call 1-800-435-7329

Before requesting help (cont.)

I cannot receive documents

automatically.

The recording image is faint.

The printing quality is poor.

A blank sheet is ejected after the

received documents are printed out.

¡The receive mode is set to the TEL mode. Set to the ANS/FAX,

TEL/FAX or FAX (FAX ONLY) mode.

¡The time to answer the call may be too long. Decrease the number

of rings (see pages 54, 55 and 56).

¡The greeting message is too long. Shorten the message (see page

43).

¡The sender transmitted a faint document. Ask them to transmit a

clearer copy of the document.

¡The thermal head is dirty. Clean it (see page 101).

¡Some paper has instructions recommending the side to print on.

Try turning over paper. We recommend smooth paper such as

Hammermillgjet PRINT for clearer printing.

¡The receiving reduction rate is not programmed correctly. Program

the proper reduction rate (see page 61).

CAUSE & REMEDYPROBLEM

Fax reception

CAUSE & REMEDYPROBLEM

Answering device

No voice messages have been

recorded in the ANS/FAX mode.

I cannot retrieve recorded

messages from a remote telephone.

¡The memory is full. Erase some or all of the messages (see pages

26 and 50).

¡Make sure that you use the remote operation ID correctly (see

page 48).

PROBLEM CAUSE & REMEDY

¡The glass or rollers are dirty. Clean them (see page 101).

¡The thermal head is dirty. Clean it (see page 101).

¡The film is not inserted correctly. Insert it correctly (see pages

99 and 100).

¡The film is not inserted correctly. Insert it correctly (see pages

99 and 100).

¡Some paper has instructions recommending the side to print on.

Try turning over paper. We recommend smooth paper such as

Hammermillgjet PRINT for clearer printing.

¡The film is not inserted correctly. Insert it correctly (see pages

99 and 100).

A dirty pattern or a black line

appears on the copied documents.

The copied image is distorted.

The document is not copied

properly.

The copied document is blank.

The printing quality is poor.

A paper jam occurs during copying.

Copying

93

Troubleshooting

and Routine Care

For Assistance, Call 1-800-435-7329

If a power failure occurs...

When a power failure occurs, note the following:

¡The unit will not function during a power failure.

¡Transmission and reception will be interrupted. Check the transaction by printing a journal report.

¡If fax documents are stored in memory, they will be lost. When power is restored, a power down report will

be printed out stating which contents in memory have been erased.

¡If delayed transmission is set and the programmed start time has passed during a power failure,

transmission will be attempted soon after power is restored.

Power down report

The power down report will be automatically printed out after power is restored.

The report will not be printed out when there are no documents stored in memory.

Power down report sample

POWER DOWN AT:Jan. 05 1997 04:30AM

RESTARTED AT:Jan. 05 1997 04:31AM

<< WARNING >>

CONTENTS HAVE BEEN CLEARED DUE TO POWER DOWN.

FOR ADDITIONAL INFORMATION, PLEASE SEE THE JOURNAL REPORT.

NO. OTHER FACSIMILE MODE PAGES FUNCTION

01 0987654321 RX 01 MEMORY RECEIVE

POWER DOWN REPORT

94

For Assistance, Call 1-800-435-7329

Error codes on your PC when using

Multi-Function Center software

When using the Multi-Function Center software and the printer or scanner function is initiated and an error

occurs, an 8 digit error code will be displayed on the status log window.

See the printer 8 digit error code below and the scanner 8 digit code on page 95.

Recording paper set lever:

When this digit is “1”, the recording paper set lever is

released. Push it back to set the lever (p. 9).

Paper jam near the recording paper entrance:

When this digit is “1”, the recording paper is not fed into

the unit properly or has jammed near the recording

paper entrance. To clear, see page 97.

Paper jam under the film cartridge or too much

paper on the paper stacker:

When this digit is “1”, the recording paper jammed

under the film cartridge or there is too much paper on

the paper stacker. Clear the jammed paper (p. 96) or

remove the printed paper.

Cover open:

When this digit is “1”, the top cover is open. Close it.

Film:

When this digit is “1”, film is empty or the film is not

inserted in the cartridge correctly. Replace the film or

film cartridge with a new one (p. 99) or reinsert the film

correctly by referring to step 8 on page 100.

Unit overheat:

When this digit is “1”, the unit is overheated. Leave it to

cool down.

»Error code for “Printer not ready.” status:

0 0

95

Troubleshooting

and Routine Care

For Assistance, Call 1-800-435-7329

»Error code for “Scanner not ready.” status:

Document feed:

When this digit is “1”, the document is not fed into

the unit properly. Reinsert the document.

Document jam:

When this digit is “1”, the document is jammed.

Remove the jammed document (p. 98).

Cover open:

When this digit is “1”, the top cover is open. Close it.

For example:

If “1” appears in the 8 digit code, see the corresponding instructions and solve the problem.

e.g. When “Scanner not ready. Error code=00010000” is displayed on the Status Log window:

Cause & remedy—The top cover is open. Close it.

0 0

00 0

96

Clearing a recording paper jam

If the unit does not eject any recording paper during reception or copying, the recording paper has jammed.

Remove the jammed paper by following the display message on this page and page 97.

When paper has jammed under the film cartridge

The display will show the following message:

Remove the jammed paper as follows:

PAPER JAMMED

1Slide the front cover open lever forward to unlock

the front cover and lift open.

3Remove the jammed recording paper.

4If the film is slack, tighten it by winding the bottom

side gears.

2Remove the film cartridge.

Front cover

open lever

Front cover

Film cartridge

Incorrect Correct

Bottom side gears

tight

97

Troubleshooting

and Routine Care

Pull the recording paper set lever forwards, then pull out

the jammed recording paper from the recording paper

entrance.

When paper has jammed near the recording paper exit

The display will show the following message:

Remove the jammed paper as follows:

REMOVE PRINTOUT

When paper has jammed near the recording paper

entrance

The display will show the following message:

Remove the jammed paper as follows:

CHECK PAPER

1Lift the unit slightly and push out the jammed

recording paper from the triangular window on the

bottom of the unit.

2Remove the jammed recording paper from the

recording paper exit.

¡If you cannot remove the jammed paper, remove

it by following steps 1–4 on page 96.

Triangular

window

5Replace the film cartridge by matching the blue

label side of the cartridge with that on the unit.

6Close the front cover securely by pushing down on

both ends.

Blue labels

Film

cartridge

Recording

paper set

lever

98

A C

B

Clearing a document jam

If the unit does not release the original document during feeding, remove the document as follows:

1Slide the front cover open lever forward to unlock

the front cover and lift open.

2Remove the jammed document carefully.

3Close the front cover securely by pushing down on

both ends.

1Slide the front cover open lever forward to unlock

the front cover and lift open.

2Shift the position of the lever by using an

instrument with a pointed end, like a clip or

ball-point pen.

Position A: When documents do not feed

Position B: Standard position (pre-selected)

Position C: When documents multiple feed

3Close the front cover securely by pushing down on

both ends.

Front cover open lever

Front cover open lever

Lever

Front cover

Adjusting the feeder pressure

When no feeding or multiple feeding occurs frequently, adjust the feeder pressure.

Front cover

99

Troubleshooting

and Routine Care

Checking the remaining film

Press (FILM\REMAINING) while the unit is idle. The display indicates the approximate amount of remaining

film.

When the film indicator points to this position, the remaining film will print up to

25 pages of letter size documents. Prepare a new film or film cartridge for

replacement.

Replacing the film or film cartridge

When the unit detects the end of the film, one of the following messages will be displayed:

The remaining film prints approx. 15 letter size documents. Prepare a new film or

film cartridge.

The film is empty. Replace the film or film cartridge with a new one.

To order replacement parts, see page 6.

FILM EMPTY

FILM NEAR EMPTY

1Slide the front cover open lever forward to unlock

the front cover and lift open.

2Remove the film cartridge.

¡If you have purchased a film cartridge (Model no.

KX-FA135) for replacement, skip to step 9.

¡To replace only the film, go to step 3.

3Unlock the four gears by (A) pulling the top side

gears (blue and green) forward and (B) pushing

back the bottom side gears (green). Remove the

used film.

4Remove the four gears from the used film cores.

Caution:

¡The film is not reusable. You can order a new

film for replacement through your nearest

authorized Panasonic dealer.

Front cover

open lever

Film cartridge

Blue gear

Green gear

Green

gear

Green gear

Top side gears

Bottom side gears

Film cores

Gears

Gears

A

A

B

B

FILM E F

FILM E F

Routine care

(continued)

100

15Insert the blue gear into the blue core of the

new film.

16Insert the three green gears into the remaining

cores of the new film.

Guide tabs

Blue gear

Blue core

Slots

Guide tabs Green gears

Slots

17Insert the film into the cartridge so that the blue

gear matches the blue label on the cartridge.

18Lock the four gears of the film by (A) pushing

back the top side gears and (B) pulling the

bottom side gears forward until they lock into

place.

¡If the film is slack, tighten it by winding the

bottom side gears.

19Insert the film cartridge by matching the blue

label on the cartridge with that on the unit.

10 Close the front cover securely by pushing down

on both ends.

¡The unit will check that the film is set correctly

and the following message will be displayed:

Display:

¡If the following message is displayed, the film

is not inserted correctly:

¡Reinsert it correctly.

CHECK FILM

PLEASE WAIT

Film

Cartridge

Blue gear

Blue label

Top side gear

Top side

gears

Bottom

side gears

Bottom

side gear

Blue labels

Film

cartridge

Incorrect Correct AB

tight

Replacing the film or film cartridge (cont.)

101

Troubleshooting

and Routine Care

Cleaning the inside of the unit

Cleaning the document feeder unit

If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document,

clean the document feeder rollers, sub roller, rubber flap, white plate and glass.

1Disconnect the power cord and the telephone line

cord.

2Slide the front cover open lever forward to unlock

the front cover and lift open.

3Clean the document feeder rollers, sub roller and

rubber flap with a cloth moistened with isopropyl

rubbing alcohol, and let dry thoroughly.

4Clean the white plate and glass with a soft dry

cloth.

5Close the front cover by gently pressing down on

both ends.

6Connect the power cord and the telephone line

cord.

Sub roller

Rubber flap

White plate

Document feeder rollers

Glass Front cover open lever

Caution:

¡Do not use paper products (such as paper towels

or tissues) to clean the inside of the unit.

Cleaning the thermal head

If dirty patterns or black bands appear on a copied or received document, clean the thermal head.

Caution:

¡To prevent a malfunction due to static electricity,

do not use a dry cloth and do not touch the

thermal head directly with your finger.

1Disconnect the power cord and the telephone line

cord.

2Slide the front cover open lever forward to unlock

the front cover and lift open.

3Clean the thermal head with a cloth moistened with

isopropyl rubbing alcohol, and let dry thoroughly.

4Close the front cover by gently pressing down on

both ends.

5Connect the power cord and the telephone line

cord.

Do not push on the black cover.

Thermal head

Caution

Front cover

Front cover

102

If required by the telephone company, inform them

of the following.

¡FCC Registration No.:

(found on the bottom of the unit)

¡Ringer Equivalence No.:

(found on the bottom of the unit)

¡The particular telephone line to which the

equipment is connected.

This unit must not be connected to a coin operated

line. If you are on a party line, check with your

local telephone company.

Ringer Equivalence Number (REN):

This REN is useful in determining the quantity of

devices you may connect to your telephone line

and still have all of those devices ring when your

telephone number is called. In most but not all

areas, the sum of the REN’s of all devices

connected to one line should not exceed five (5.0).

To be certain of the number of devices you may

connect to your line, as determined by the REN,

you should contact your local telephone company

to determine the maximum REN for your calling

area.

In the event that terminal equipment causes harm

to the telephone network, the telephone company

should notify the customer, if possible, that service

may be stopped. However, where prior notice is

impractical, the company may temporarily cease

service providing that they:

a) Promptly notify the customer.

b) Give the customer an opportunity to correct the

problem with their equipment.

c) Inform the customer of the right to bring a

complaint to the Federal Communication

Commission pursuant to procedures set out in

FCC Rules and Regulations Subpart E of Part

68.

The Telephone Company may make changes in its

communications facilities, equipment operations, or

procedures where such action is reasonably

required in the operation of its business and is not

inconsistent with the rules and regulations in FCC

Part 68. If such changes can be reasonably

expected to render any customer terminal

equipment incompatible with telephone company

communications facilities, or require modification or

alteration of such terminal equipment, or otherwise

materially affect its use or performance, the

customer shall be given adequate notice in writing,

to allow the customer an opportunity to maintain

uninterrupted service.

CAUTION:

Any changes or modifications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate this

device.

When programming emergency numbers and/or

making test calls to emergency numbers:

1. Remain on the line and briefly explain to the

dispatcher the reason for the call before

hanging up.

2. Perform such activities in the off-peak hours;

such as early morning or late evenings.

This telephone provides magnetic coupling to

hearing aids.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment

and receiver.

—Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV

technician for help.

FCC information

General Information

103

General

Information

Panasonic Sales Company

Division of Matsushita Electric of

Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5, San Gabriel

Industrial Park, Carolina, Puerto Rico 00985

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way, Secaucus,

New Jersey 07094

PANASONIC

Facsimile Products

Limited Warranty

Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the

warrantor”), will repair this product with new or refurbished parts, free of charge, in the USA or Puerto

Rico for one (1) year from the date of original purchase in the event of a defect in materials or

workmanship.

This Limited Warranty Excludes both Labor and Parts for: batteries, antennas, and cosmetic parts

(cabinet).

Carry-in or mail-in service in the USA or Puerto Rico can be obtained during the warranty period by

contacting a Panasonic Services Company (PASC) Factory Servicenter listed in the Servicenter

Directory. Or call, toll free, 1-800-HELP FAX (1-800-435-7329) to locate a PASC Factory Servicenter.

Carry-in or mail-in service in Puerto Rico can be obtained during the warranty period by calling the

Panasonic Sales Company telephone number listed in the Servicenter Directory.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of

original purchase will be required before warranty service is rendered.

This warranty only covers failures due to defects in material and workmanship which occur during normal

use and (when applicable) does not cover the print and ink cartridge, the toner cartridge and drum unit or

the film cartridge. The warranty does not cover damages which occur in shipment, or failures which are

caused by products not supplied by the warrantor, or failures which result from accident, misuse, abuse,

neglect, mishandling, faulty installation, misapplication, set-up adjustments, improper operation or

maintenance, alteration, modification, power line surge, improper voltage supply, lightning damage,

signal reception problems, commercial use such as hotel, office, restaurant, or other business or rental

use of the product, or service by anyone other than a PASC Factory Servicenter or a PASC authorized

Servicenter, or damage that is attributable to acts of God.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above.

THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF

MERCHANTABILITY, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH

ABOVE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations

on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to

state. If a problem with this product develops during or after the warranty period, you may contact your

dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the Customer

Satisfaction Center at the company address indicated above.

104

Service center directory

OPERATION ASSISTANCE

¡

FAX ADVANTAGE PROGRAM

DIAL TOLL FREE: 1-800-HELP-FAX (1-800-435-7329) (9:00am–8:00pm Monday–Friday, EST)

PRODUCT INFORMATION

¡

LITERATURE REQUESTS

¡

DEALER LOCATIONS

Customer Satisfaction Center 2F-3, One Panasonic Way, Secaucus, NJ 07094 (Headquarters)

201-348-9090 (9:00am–8:00pm Monday–Friday, EST)

ACCESSORY PURCHASES

1-800-332-5368 (Consumer orders only)

Panasonic Services Company Accessory Order Office, 20421-84th Avenue South Kent, WA 98032

(6:00am–6:00pm Monday–Friday, 6:00am–10:30am Saturday, PST)

(Visa, Mastercard, Discover card, American Express, Check)

CALIFORNIA

6550 Katella Avenue

Cypress, CA 90630

Phone (714) 373-7426

Fax (714) 894-8534

800 Dubuque Avenue

S. San Francisco,

CA 94080

Phone (415) 871-6373

Fax (415) 871-6840

20201 Sherman Way

Suite 102

Canoga Park, CA 91306

Phone (818) 709-1775

Fax (818) 709-2165

3878 Ruffin Road

Suite A

San Diego, CA 92123

Phone (619) 560-9200

Fax (619) 560-1831

COLORADO

1640 South Abilene Suite D

Aurora, CO 80012

Phone (303) 752-2024

Fax (303) 752-0610

FLORIDA

3700 North 29th Avenue

Suite 102

Hollywood, FL 33020

Phone (954) 925-2880

Fax (954) 925-5224

GEORGIA

8655 Roswell Road

Suite 100

Atlanta, GA 30350

Phone (770) 518-6301

Fax (770) 518-6306

HAWAII

99-859 Iwaiwa Street

Aiea, Hawaii 96701

Phone (808) 488-1996

Fax (808) 486-4369

ILLINOIS

1703 North Randall Road

Elgin, IL 60123

“12:30 to 4:30, Mon-Fri”

Phone (847) 468-5464

Fax (847) 468-5465

9060 Golf Road

Niles, IL 60714

Phone (847) 608-1010

Fax (847) 299-1710

MARYLAND

62 Mountain Road

Glen Burnie, MD 21061

Phone (800) 973-4071

Fax (410) 760-3779

MASSACHUSETTS

60 Glacier Drive, Suite G

Westwood, MA 02090

Phone (617) 329-4280

Fax (617) 329-0586

Fpick-up/drop-off only

MICHIGAN

37048 Van Dyke Avenue

Sterling Heights, MI 48312

Phone (810) 939-2060

Fax (810) 939-2638

MINNESOTA

7850-12th Avenue South

Airport Business Center

Bloomington, MN 55425

Phone (612) 854-8624

Fax (612) 854-2089

OHIO

2236 Waycross Road

Cincinnati, OH 45240

Phone (513) 851-4180

Fax (513) 851-8443

PENNSYLVANIA

2221 Cabot Boulevard West

Suite B

Langhorne, PA 19047

Phone (215) 741-0661

Fax (215) 741-0521

Chartiers Valley

Shopping Center

1025 Washington Pike

Bridgeville, PA 15017

Phone (412) 257-4522

Fax (412) 257-4650

TENNESSEE

919-8th Avenue South

Nashville, TN 37203

Phone (615) 244-4434

Fax (615) 244-6713

TEXAS

7482 Harwin Drive

Houston, TX 77036

Phone (713) 781-1528

Fax (713) 781-0643

13615 Welch Road Suite 101

Farmers Branch, TX 75244

Phone (972) 385-1975

Fax (972) 960-7626

WASHINGTON

20425-84th Avenue South

Kent, WA 98032

Phone (206) 872-7922

Fax (206) 872-0918

Matsushita Electric

of Puerto Rico, Inc.

Panasonic Sales Company/

Factory Servicenter

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park

Carolina, Puerto Rico 00985

Phone (787) 750-4300

Fax (787) 768-2910

AUTHORIZED SERVICENTERS

EAST (PCE)

2221 Cabot Boulevard West

Suite A

Langhorne, PA 19047

Phone (215) 741-0676

Fax (215) 750-6492

Covers:

CT, DE, ME, MD, MA, NH, NJ,

NY, PA, RI, VT, VA, DC, WV

EAST (PCE)

1225 Northbrook Parkway

Suite 2-390

Suwannee, GA 30174

Phone (770) 338-6860

Fax (770) 338-6548

Covers:

AL, FL, GA, MS, NC, SC, TN

CENTRAL (PCC)

1707 North Randall Road

Elgin, IL 60123

Phone (847) 468-5530

Fax (847) 468-5528

Covers:

AR, IL, IN, IA, KS, KY, LA, MI,

MN, MO, NE, ND, OK, SD, TX,

WI, OH

WEST (PCW)

6550 Katella Avenue

Cypress, CA 90630

Phone (714) 373-7440

Fax (714) 373-7447

Covers:

AK, AZ, CA, CO, ID, MT, NV,

NM, OR, UT, WA, WY, HI

REPAIR INQUIRIES

PARTS DISTRIBUTION LOCATIONS

To locate parts distributors in your area (within the USA)

DIAL TOLL FREE 1-800-545-2672 (24 hours a day, 7 days a week)

Service in Puerto Rico

Regional Customer Care Department

F

As of Apr. ’97

105

General

Information

User information

For product service

¡Service centers are listed on page 104.

¡Call toll free 1-800-545-2672 for the location of an authorized service center.

When you ship the product

¡Carefully pack your unit, preferably in the original carton.

¡Attach a letter, detailing the symptom or problem, to the outside of the carton.

¡Send the unit to an authorized service center, prepaid and adequately insured.

¡Do not send your unit to the Panasonic Consumer Electronics Company or to any executive or regional sales

offices. These locations do not repair consumer products.

106

Specifications

1. Applicable Lines: Public Switched Telephone Network

2. Document Size: Max. 216 mm (81⁄2w) in width

Max. 600 mm (235⁄8w) in length

3. Effective Scanning Width: 208 mm (83⁄16w)

4. Recording Paper Size: Letter: 216 q 279 mm (81⁄2w q 11w)

Legal: 216 q 356 mm (81⁄2w q 14w)

5. Effective Printing Width: 208 mm (83⁄16w)

6. Transmission Time*: Approx. 15 s/page (Original mode)

Approx. 30 s/page (G3 Normal mode)

7. Scanning Density: Horizontal: 8 pels/mm (203 pels/inch)

Vertical: 3.85 lines/mm (98 lines/inch)—Standard mode

7.7 lines/mm (196 lines/inch)—Fine/Halftone mode

15.4 lines/mm (392 lines/inch)—Superfine mode

8. Halftone Level: 64-level

9. Scanner Type: CCD image sensor

10. Printer Type: Thermal printing

11. Data Compression System: Modified Huffman (MH), Modified READ (MR)

12. Modem Speed: 9600/7200/4800/2400 bps; Automatic Fallback

13. Operating Environment: 5–35 °C (41–95 °F), 20–80 % RH (Relative Humidity)

14. Dimensions (HqWqD): 149 q 367 q 355 mm (57⁄8w q 147⁄16w q 1331⁄32w)

15. Mass (Weight): Approx. 5.2 kg(11.4 lb.)

16. Power Consumption: Standby: Approx. 7.0 W / Transmission: Approx. 16 W

Reception: Approx. 38 W / Copy: Approx. 52 W

Maximum: Approx. 160 W

17. Power Supply: 120 V AC, 60 Hz (This unit will not function at 50 Hz.)

18. Memory Capacity: Voice memory: Approx. 18 minutes of recording time including the

greeting message.**

Fax memory: Approx. 28 pages of document memory based on the

CCITT No. 1 Test Chart in standard resolution.

Note:

¡Any details given in these instructions are subject to change without notice.

¡The pictures and illustrations in these instructions may vary slightly from the actual product.

*Transmission speed depends on the contents of the pages,

resolution, telephone line conditions and capability of the

receiving unit. The 15 second speed is based upon the CCITT

No.1 Test Chart.

**Recording time may be reduced by the calling party’s

background noise.

CCITT No. 1 Test Chart

107

One-touch dialing list

Direct call

Station No. Name/Telephone No. Direct call

Station No. Name/Telephone No.

1

2

3

4

5

6

7

8

9

10 ((LOWER) 1)

11 ((LOWER) 2)

12 ((LOWER) 3)

13 ((LOWER) 4)

14 ((LOWER) 5)

15 ((LOWER) 6)

16 ((LOWER) 7)

17 ((LOWER) 8)

18 ((LOWER) 9)

108

One-touch dialing list

Direct call

Station No. Name/Telephone No. Direct call

Station No. Name/Telephone No.

1

2

3

4

5

6

7

8

9

10 ((LOWER) 1)

11 ((LOWER) 2)

12 ((LOWER) 3)

13 ((LOWER) 4)

14 ((LOWER) 5)

15 ((LOWER) 6)

16 ((LOWER) 7)

17 ((LOWER) 8)

18 ((LOWER) 9)

109

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

Speed dialing list

Station

No. Name/Telephone No. Station

No.Name/Telephone No. Station

No.Name/Telephone No.

00

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

110

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

Speed dialing list

Station

No. Name/Telephone No. Station

No.Name/Telephone No. Station

No.Name/Telephone No.

00

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

111

Index

AAddress Book RRRRRRRRR 75, 84, 87

Advanced features RRRRRRRRRR 53

Resetting RRRRRRRRRRRRR 69

ALL MESSAGES button RRRRRR 26, 27

ANS/FAX mode RRRRRRRRRR 22, 24

ANS/FAX ring countRRRRRRRRRR 54

Automatic dialing RRRRRRRRR 33, 34

Automatic dialing mode setting RRRRR 10

AUTO RECEIVE button RRRRRR 22, 24

AUTO RECEIVE mode RRRRR 22, 24, 29

BBasic features RRRRRRRRRRRR 53

CCall counter RRRRRRRRRRRRR 26

Caller IDRRRRRRRRRRRRRRR 17

Caller list RRRRRRRRRRRRRR 70

Caller’s recording timeRRRRRRRRR 57

CHECK button RRRRRRRRRRRR 44

Cleaning RRRRRRRRRRRRRR 101

Communication messages RRRRRRR 72

Copier RRRRRRRRRRRRRR 75, 87

COPY buttonRRRRRRRRRRRRR 18

DDate and time RRRRRRRRRRRR 13

Delayed transmission RRRRRRRRR 39

DELETE key RRRRRRRRRRRRR 14

Dialing mode RRRRRRRRRRR 10, 58

DIGITAL SP-PHONE button RRRRRR 16

Direct call station keys RRRRR 14, 33, 34

DIRECTORY button RRRRRRRR 34, 35

Display contrast RRRRRRRRRRR 62

Distinctive ring serviceRRRRRRRRR 42

Document jam RRRRRRRRRRRR 98

Document size RRRRRRRRRRR 106

Documents (the unit can feed) RRRRR 19

EElectronic telephone directory RRRRR 35

ERASE button RRRRRRRRRR 26, 44

Error message RRRRRRRRRR 89, 90

FFacsimile telephone number RRRRRR 15

Fax auto redial RRRRRRRRRRRR 34

FAX (FAX ONLY) mode RRRRRR 22, 29

Fax pager RRRRRRRRRRRRRR 67

FAX ring count RRRRRRRRRRRR 55

Fax voice guidance RRRRR 20, 21, 23, 65

Feature listRRRRRRRRRRRRRR 70

Feeder pressure RRRRRRRRRRR 98

Film detection RRRRRRRRRRRR 68

Film/Film cartridge, replacing RRR 99, 100

FILM REMAINING button RRRRRRR 99

Finder RRRRRRRRRRRRRR 75, 88

FLASH button RRRRRRRRRRRR 37

Friendly reception RRRRRRRRR 23, 64

GGreeting messages RRRRRRRRRR 43

HHELP button RRRRRRRRRRRRR 12

IICM monitor RRRRRRRRRRRRR 66

INSERT key RRRRRRRRRRRRR 14

JJournal auto print RRRRRRRRRRR 71

Journal reportRRRRRRRRRRR 70, 72

LLaunch padRRRRRRRRRRRR 75, 88

Logo RRRRRRRRRRRRRRRR 14

Logo print position RRRRRRRRRR 59

LOWER key RRRRRRRRRRR 33, 34

MMANUAL RECEIVE mode RRRRR 22, 31

Memory reception alert RRRRRRRR 64

MEMO/2WAY REC button RRRRRRR 28

Message alert RRRRRRRRRRRR 63

Message Center RRRRRRRR 75, 80, 88

Message transfer RRRRRRRRRRR 46

MUTE buttonRRRRRRRRRRRRR 16

NNEW MESSAGES button RRRRR 26, 27

OOne-touch dialing RRRRRRRRR 33, 34

Overseas transmission modeRRRRRR 60

PPAUSE button RRRRRRRRRRRR 37

Polling RRRRRRRRRRRRRRR 38

Power down report RRRRRRRRRR 93

QQUICK button RRRRRRRRRRRR 27

RREC button RRRRRRRRRRRRR 43

Receiving reduction RRRRRRRRRR 61

Recording paper jam RRRRRRR 96, 97

Recording paper size RRRRRRR 8, 106

Recording time alertRRRRRRRRRR 63

Recording time for ANS/FAX greeting message

R66

REDIAL button RRRRRRRRRRRR 37

Reduction copyRRRRRRRRRRRR 52

Remote fax activation code RRRRRR 41

Remote operation ID RRRRRRRRR 48

REPEAT button RRRRRRRRRRR 27

Reserving transmission RRRRRRRR 40

RESOLUTION button RRRRRRRRR 18

Ring pattern detection RRRRRRRRR 42

SSECRET key RRRRRRRRRRR 14, 33

SELECT buttonRRRRRRRRRRRR 43

Send From Fax RRRRRRRR 75, 83, 88

Silent fax recognition ring RRRRRRR 57

SKIP button RRRRRRRRRRRRR 27

SLOW button RRRRRRRRRRRR 27

SPACE key RRRRRRRRRRRRR 14

Speed dialing RRRRRRRRRRR 33, 34

Summary of user programmable features RR 53

TTelephone number listRRRRRRRRR 70

TEL mode RRRRRRRRRRRR 22, 23

TEL/FAX mode RRRRRRRR 22, 30, 31

TEL/FAX ring count RRRRRRRRRR 56

Toll saver RRRRRRRRRRRRRR 54

TONE buttonRRRRRRRRRRRRR 37

Transmission report RRRRRRRR 71, 72

VViewer RRRRRRRRRRRR 75, 81, 87

Voice contact RRRRRRRRRRRR 36

Voice guide RRRRRRRRRRRRR 21

Voice time/day stamp RRRRRRRRR 26

VOLUME button RRRRRRRR 13, 16, 17

Free peace of mind,

direct from Panasonic

NO EXTRA COST

■

1-year limited warranty

1

parts & labor

■

Toll-free help line

■

Free overnight replacement

2

and repair program

Printed in Malaysia PFQX1108ZB KF0697MK2117 D

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way, Secaucus,

New Jersey 07094

Panasonic Sales Company,

Division of Matsushita Electric of

Puerto Rico, Inc. (“PSC”)

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Panasonic

KX-FM220

Proof of Purchase

The Panasonic Fax Advantage Consumer Service Program.

Panasonic knows that if your fax machine is not up and running, neither

is your business. That’s why we created the Panasonic Fax Advantage

Program. Included at no extra cost with the purchase of a Panasonic

Fax Machine, the Fax Advantage Program can provide a free

replacement unit

2

overnight if your original unit is in need of repair.

Here’s how it works:

1. If you have a problem with your fax while it is covered by the one-

year limited warranty

1

, call our toll-free help-line at 1-800-HELPFAX.

2. Talk to one of our technical experts to diagnose your problem over

the phone.

3. If repairs are necessary and you are entitled to service under the

terms and conditions of the limited warranty

3

, we will send a refur-

bished replacement unit to you overnight or second business day

delivery, depending on the time of your call.

A second option available under our one-year limited warranty is to

mail-in or carry-in your fax to one of our Regional Service centers,

where the unit will be repaired and returned to you.

Instructions

If you choose to receive a replacement unit under the Fax Advantage

Program, Panasonic will provide a replacement unit which will be

completely refurbished, quality-tested by Panasonic technicians and

individually hand-inspected before it is shipped to you. You will keep the

replacement unit and send the original unit to us in the replacement

unit’s box. UPS will pick up the unit at no charge to you, should it be

determined that you are entitled to warranty service. A proof-of-

purchase must be included with the returned product. Any unit that is

replaced by Panasonic and not shipped with proper proof-of-purchase

by you will be subject to a minimum $100.00 charge. The original unit

must be properly packaged in the same manner as the replacement

unit, utilizing

the packing materials provided. Damage due to improper

or inadequate packing will be charged to you as an out-of-warranty

cost.

If our 1-800-HELPFAX technicians determine that your unit may be an

“out-of-box failure”

4

, we will attempt to provide you with a factory-new

replacement unit

5

. You must ship a copy of your receipt with your origi-

nal unit to verify that you purchased the unit within 10 days prior to your

1-800-HELPFAX call.

Requirements

You must give our technicians a valid credit card number (Discover,

VISA, Master Card, or American Express/Optima). Product that is not

returned to Panasonic by 10 business days after shipment of the

replacement product will be charged to your credit card account at

Panasonic’s Suggested Retail Price (see dealer for details). If your

original unit is not eligible for warranty service, your card will be

charged for the non-warranty repair of the unit at Panasonic’s current

rate for parts and labor and for any shipping charges associated with

this program. If you do not wish to pay out-of-warranty repair costs, you

will be responsible for returning the replacement unit to Panasonic and

for paying all shipping charges associated with this program including

the overnight delivery of the replacement product to you, shipment of

the problem unit to Panasonic, shipment of the replacement unit back

to Panasonic and the return of your original unit back to you. Credit

status will be verified prior to sending the replacement product.

1. See dealer for limited warranty details.

2. Replacement unit is refurbished.

3. Replacement program excludes Puerto Rico and is subject to termination at any

time without advance notice.

4. “Out-of-box failure” is an inoperable unit that was purchased no more than 10 days

prior to your 1-800-HELPFAX call, and would otherwise qualify for warranty service

under the terms and conditions of the limited warranty.

5. Panasonic reserves the right to send a refurbished unit.

F

AX

A

DVANTAGE

P

ROGRAM

Panasonic FAX ADVANTAGE PROGRAM