Pantech RAP Dual-Band CDMA PCS Phone with Bluetooth User Manual 080803 CDM8975 RAP REV00 indd
Pantech Co., Ltd. Dual-Band CDMA PCS Phone with Bluetooth 080803 CDM8975 RAP REV00 indd
Pantech >
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
![60 Chapter 5 − Menu FunctionRecent CallsRecent CallsBLOCKED This menu appears only when “Incoming Call Restriction” is set.1. From standby mode, press the OK Key [MENU], the Directional Key right once for RECENT CALLS, and press Blocked Calls.2. Press the Directional Key up or down to highlight an entry, then:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Save to Contacts: To store the phone number in your Contacts or PTT Contacts. Erase: To erase a call listing. Lock/Unlock: To lock or unlock a call listing.Erase All: To erase all Blocked Call entries.View Timers: To display usage time.• Press the Left Soft Key [Message] to select:TXT Message: To send a TXT message to the contact.Picture Message: To send a Picture message to the contact.Video Message: To send a Video message to the contact.Voice Message: To send a Voice message to the contact. Please refer to page 80 for more details on “Restrictions”.ALL Displays information about the most recently received, dialed and missed calls.1. From standby mode, press the OK Key [MENU], the Directional Key right once for RECENT CALLS, and press 4. All.2. Press the Directional Key up or down to highlight an entry, then:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Save to Contacts: To store the phone number in your Contacts or PTT Contacts. Erase: To erase a call listing. Lock/Unlock: To lock or unlock a call listing.Erase All: To erase all All Call entries.View Timers: To display usage time.• Press the Left Soft Key [Message] to select:TXT Message: To send a TXT message to the contact.Picture Message: To send a Picture message to the contact.Video Message: To send a Video message to the contact.Voice Message: To send a Voice message to the contact. Shortcut: To view a quick list of all your calls, press the Send Key from standby mode.Menu Function − Chapter 5 61Recent CallsRecent CallsRECEIVED Displays information about the 90 most recently received calls. Place a call to a received call by simply pressing the SEND Key .1. From standby mode, press the OK Key [MENU], the Directional Key right once for RECENT CALLS, and press 2. Received.2. Press the Directional Key up or down to highlight an entry, then:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Save to Contacts: To store the phone number in your Contacts or PTT Contacts. Erase: To erase a call listing. Lock/Unlock: To lock or unlock a call listing.Erase All: To erase all Received Call entries.View Timers: To display usage time.• Press the Left Soft Key [Message] to select:TXT Message: To send a TXT message to the contact.Picture Message: To send a Picture message to the contact.Video Message: To send a Video message to the contact.Voice Message: To send a Voice message to the contact.DIALED Displays information about the 90 most recently dialed numbers. Place a call to a dialed call by simply pressing the SEND Key .1. From standby mode, press the OK Key [MENU], the Directional Key right once for RECENT CALLS, and press 3. Dialed.2. Press the Directional Key up or down to highlight an entry, then:• Press the OK Key [OPEN] to view the entry.• Press the Send Key to place a call to the number.• Press the Right Soft Key [Options] to select:Save to Contacts: To store the phone number in your Contacts or PTT Contacts. Erase: To erase a call listing. Lock/Unlock: To lock or unlock a call listing.Erase All: To erase all Dialed Call entries.View Timers: To display usage time.• Press the Left Soft Key [Message] to select:TXT Message: To send a TXT message to the contact.Picture Message: To send a Picture message to the contact.Video Message: To send a Video message to the contact.Voice Message: To send a Voice message to the contact.080803_CDM8975_RAP_REV00.indd 60-61080803_CDM8975_RAP_REV00.indd 60-61 2008.8.25 5:31:3 PM2008.8.25 5:31:3 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-1.png)
![VIEW TIMERS Checks the usage time and manages your calls within the limit you set. The 11 timers include (Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmit Data, Received Data, Total Data, Last Reset, Lifetime Calls, Lifetime Data Counter):1. From standby mode, press the OK Key [MENU], the Directional Key right once for RECENT CALLS, and press 5. View Timers.2. Press the Directional Key up or down to highlight a call list. Call timers include: Last Call/All Calls/Received Calls/Dialed Calls/Roaming Calls/ Transmit Data/Received Data/Total Data/Last Reset/Lifetime Calls/Lifetime Data Counter• Press the Left Soft Key [Reset] to reset highlighted timer.• Press the Right Soft Key [Reset All] to reset all timers.62 Chapter 5 − Menu FunctionRecent CallsRecent CallsBLUETOOTH MENU Bluetooth technology connectivity enables wireless connections between electronic devices. If connected with a Bluetooth Handsfree device, you can use your phone more freely. Since devices with Bluetooth connectivity com-municate using radio waves, your phone and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (30 feet) of each other. The connection can be subject to interference from obstructions such as walls or other electronic devices. This device is compliant with Bluetooth specification 1.2, supporting the following profiles: HSP V1.0 (headset profile), AVRCP V1.0 (stereo profile), and HFP V1.5 (handsfree car kit profile). To ensure interoperability between other devices supporting Bluetooth technology, use approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this phone. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or Verizon Wireless. If you want more information on this function, visit the Bluetooth Technology organization Web site: https://www.bluetooth.org/. Important: Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.BLUETOOTH ON/OFFTo toggle Bluetooth® power On/Off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Left Soft Key [Turn On/Turn Off]. A Confirmation window appears.ADD NEW DEVICEPairing is the process that allows the handset to locate, establish and register a 1-to-1 connection with the target device.1. Follow the Bluetooth® accessory instructions to set the device to pairing mode.2. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu. Press the OK Key [OK] or select “1. Add New Device”.3. If the Bluetooth® power is switched off, the following message will appear on the LCD screen: “TURN BLUETOOTH POWER ON?” Press the OK Key [OK] to select “Yes”. Menu Function − Chapter 5 63SettingsSettings080803_CDM8975_RAP_REV00.indd 62-63080803_CDM8975_RAP_REV00.indd 62-63 2008.8.25 5:31:5 PM2008.8.25 5:31:5 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-2.png)
![4. The handset will prompt you with the following message on the LCD screen: “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE”. Press the OK Key [OK].5. The device will appear in the “ADD NEW DEVICE” menu. Press the Directional Key up or down to select the device you wish to pair to, then press the OK Key [PAIR].6. The handset will prompt you for the passkey. Consult the Bluetooth® accessory (sold separately) instructions for the appropriate passkey (typically “0000”—4 zeroes). Enter the passkey, then press the OK Key [OK]. You do not need to input the passkey for pairing when the passkey of the Bluetooth® Headset or hands-free kit is 0000.7. The handset will prompt you with the following message on the LCD screen: [Device Name] Before Connecting. If you would like to always confirm before connecting to the Bluetooth® device, select Always Ask, then press the OK Key [OK]. Then the handset will prompt you with the message “Connect to [Device Name]”. Select “Yes”, then press the OK Key [OK]. If you do not wish to confirm every time before connecting to the Bluetooth® device, select “Always Connect”, then press the OK Key [OK].8. Once connected, you will see the device listed in the Bluetooth Menu and the Bluetooth® device connected icon will appear at the top of the LCD screen when connected to the Bluetooth® device. You can also check out the connection with an Arrow icon on the Bluetooth Menu. • In the Bluetooth Menu, you can disconnect the connected device with an icon by pressing the OK Key [Drop]. Conversely, you can reconnect by pressing the OK Key [OK] again.• When an audio device is connected, you can select another device and the connection is automatically transferred from that audio device to the other one.• If multiple devices are displayed, select the devices you want to connect.OPTIONS1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Directional Key up or down to select the paired device.3. Press the Right Soft Key [Options].• If “Audio Device” connected, press the Right Soft Key [Options], you can choose from the following options: Remove Device: Removes a device from the pairing list. Rename Device: Renames a paired device. 64 Chapter 5 − Menu FunctionSettingsSettingsService Discovery: To search for the services that the selected device supports. Device Info: Displays device information.• If “PC or Other Device” connected, press the Right Soft Key [Options], you can choose from the following options: Remove Device: Removes a device from the pairing list. Rename Device: Renames a paired device. Incoming Security: Sets permissions for connecting to an incoming device. Service Discovery: To search for the services that the selected device supports. Send Name Card: Send the stored phonebook to a selected device. Send Picture: Send photos stored in My Pictures to a selected device. Send Video: Send videos stored in My Videos to a selected device. Get Name Card: Request and receive the Name card information of the other side. Device Info: Displays device information. SETTINGSMY PHONE NAME To edit the Bluetooth® name of your phone:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Right Soft Key [Options].3. Press “1. My Phone Name”.4. Use the numeric keypad to enter a new custom name.5. Press the OK Key [OK] to save and exit.DISCOVERY MODE To set whether your device is able to be searched for by other Bluetooth® devices in the area:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Right Soft Key [Options].3. Press “2. Discovery Mode”. If Bluetooth power is not on, you will be prompted to turn it on in order to proceed. 4. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].SUPPORTED PROFILES To view brief descriptions of the profiles supported by the phone:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Right Soft Key [Options].Menu Function − Chapter 5 65SettingsSettings080803_CDM8975_RAP_REV00.indd 64-65080803_CDM8975_RAP_REV00.indd 64-65 2008.8.25 5:31:6 PM2008.8.25 5:31:6 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-3.png)
![3. Press “3. Supported Profiles”.4. Press the Directional Key up or down to select one of the following profiles, and then press the OK Key [VIEW]. Headset/Handsfree/Dial Up Networking/Stereo/Phonebook Access/Object Push/File TransferAUTO PAIR HANDSFREE To set Auto Pair Handsfree On/Off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 3. Bluetooth Menu.2. Press the Right Soft Key [Options].3. Press “4. Auto Pair Handsfree”.4. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].SOUNDS SETTINGS EASY SET UP To set up phone sounds using the Easy Set Up Wizard:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 1. Easy Set Up.2. Select the CALL SOUNDS ringer type by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the CALL SOUNDS ringer type, press the Left Soft Key [Skip].3. Select the CALL SOUNDS ringtone by pressing the Directional Key up or down, then press the OK Key [SET]. • To play the selected ringtone, press the Left Soft Key [Play].• To skip selecting the CALL SOUNDS ringtone, press the Left Soft Key [Skip].4. Select the KEYPAD VOLUME by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the KEYPAD VOLUME, press the Left Soft Key [Skip].5. Select the TEXT MESSAGE ALERTS ringer type by pressing the Directional Key up or down, then press the OK Key [SET]. 66 Chapter 5 − Menu FunctionSettingsSettings To skip selecting the TEXT MESSAGE ALERTS ringer type, press the Left Soft Key [Skip].6. Select the TEXT MESSAGE ALERTS ringtone by pressing the Directional Key up or down, then press the OK Key [SET]. • To play the selected ringtone, press the Left Soft Key [Play].• To skip selecting the TEXT MESSAGE ALERTS ringtone, press the Left Soft Key [Skip].7. Select the PIC/VIDEO/VOICE MESSAGE ringer type by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the PIC/VIDEO/VOICE MESSAGE ringer type, press the Left Soft Key [Skip].8. Select the PIC/VIDEO/VOICE MESSAGE ringtone by pressing the Directional Key up or down, then press the OK Key [SET]. • To play the selected ringtone, press the Left Soft Key [Play].• To skip selecting the PIC/VIDEO/VOICE MESSAGE ringtone, press the Left Soft Key [Skip].9. Select the VOICEMAIL MSG ALERTS ringer type by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the VOICEMAIL MSG ALERTS ringer type, press the Left Soft Key [Skip].10. Select the VOICEMAIL MSG ALERTS ringtone by pressing the Directional Key up or down, then press the OK Key [SET]. • To play the selected ringtone, press the Left Soft Key [Play].• To skip selecting the VOICEMAIL MSG ALERTS ringtone, press the Left Soft Key [Skip].11. “ SOUNDS EASY SET UP COMPLETE” will be displayed. CALL SOUNDS To set ringtones for types of incoming calls:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 2. Call Sounds.CALL RINGTONE 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 2. Call Sounds, 1. Call Ringtone.2. Press the Directional Key up or down to select a ringtone, then press the OK Key [OK] to save the sound. To play the ringtone, press the Left Soft Key [Play].Menu Function − Chapter 5 67SettingsSettings080803_CDM8975_RAP_REV00.indd 66-67080803_CDM8975_RAP_REV00.indd 66-67 2008.8.25 5:31:8 PM2008.8.25 5:31:8 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-4.png)
![CALL VIBRATE 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 2. Call Sounds, 2. Call Vibrate.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].ALERT SOUNDS To select the alert type for a new message:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 3. Alert Sounds.2. Press the Directional Key up or down to select “1. TXT Message”, “2. Pic/Video/Voice Message”, “ 3. Voicemail” then press the OK Key [OK].3. Press the Directional Key up or down to select “Tone”, “ Vibrate”, “Reminder”, then press the OK Key [OK].• Tone: Press the Directional Key up or down to select a ringer, then press the OK Key [OK]. To play the alert tone, press the Left Soft Key [Play].• Vibrate: Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].• Reminder: Press the Directional Key up or down to select “Once”, “ Every 2 Minutes”, “Every 15 Minutes”, “ Off”, then press the OK Key [OK].EMERGENCY TONETo set the alert for emergency dialing.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 3. Alert Sounds, 4. Emergency Tone.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. Alert/Vibrate/OffKEYPAD VOLUME To set the keypad volume:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 4. Keypad Volume.2. Adjust the volume by pressing the Directional Key up or down, then press the OK Key [OK] to save the setting.68 Chapter 5 − Menu FunctionSettingsSettingsSERVICE ALERTS To set any of the three Alert options to either On or Off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 5. Service Alerts.2. Press the Directional Key up or down to select one of the following options, then press the OK Key [OK].• ERI: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the display screen informing the handset user of which systems the wireless device is using as compared to the service plan they purchased. The ERI Banner text changes to tell a customer if they are using the: “Verizon Wireless Network”, “Extended Network” or “Roaming”.• Minute Beep: Alerts you every minute during a call.• Call Connect: Alerts you when the call is connected.3. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].DEVICE CONNECT Allows you to turn the Device Connect On or Off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 6. Device Connect.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].POWER ON/OFF To set the phone to sound a tone when the phone is powered on/off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 4. Sounds Settings, 7. Power On/Off.2. Press “1. Power On” or “2. Power Off”.3. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].DISPLAY SETTINGS Allows you to customize the display.EASY SET UP To set up display options using the Easy Set-Up Wizard:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 1. Easy Set Up.Menu Function − Chapter 5 69SettingsSettings080803_CDM8975_RAP_REV00.indd 68-69080803_CDM8975_RAP_REV00.indd 68-69 2008.8.25 5:31:10 PM2008.8.25 5:31:10 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-5.png)
![2. Enter the text to be displayed on your main screen, then press the OK Key [SET]. • To change the input mode, press the Left Soft Key [Abc].• To skip entering the personal banner, press the Left Soft Key [Skip].3. Set the Backlight duration for main display by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the display backlight time, press the Left Soft Key [Skip].4. Set the Backlight duration for keypad by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the keypad backlight time, press the Left Soft Key [Skip].5. Select the Main Screen Wallpaper image by pressing the Directional Key up, down, left or right, then press the OK Key [SET]. • To preview the selected wallpaper image, press the Left Soft Key [View].• To skip selecting the Main Screen Wallpaper image, press the Left Soft Key [Skip].6. Select the Front Screen Wallpaper image by pressing the Directional Key up, down, left or right, then press the OK Key [SET]. • To preview the selected wallpaper image, press the Left Soft Key [View].• To skip selecting the Front Screen Wallpaper image, press the Left Soft Key [Skip].7. Select the Display Theme for your device by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected display theme image, press the Left Soft Key [Preview].• To skip selecting the Display Theme image, press the Left Soft Key [Skip].8. Select your device’s Main Menu layout by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected main menu layout style, press the Left Soft Key [Preview].• To skip selecting the Main Menu Layout, press the Left Soft Key [Skip].9. Select Dial Font Size by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected the Dial Fonts size, press the Left Soft Key [Preview].• To skip selecting the Dial Fonts size, press the Left Soft Key [Skip].10. Select the format of the Main Screen Clock by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected the Main Screen Clock format, press the Left Soft Key [Preview].• To skip selecting the Main Screen Clock format, press the Left Soft Key [Skip].11. Select the format of the Front Screen Clock by pressing the Directional Key up or down, then press the OK Key [SET]. 70 Chapter 5 − Menu FunctionSettingsSettings • To preview the selected the Front Screen Clock format, press the Left Soft Key [Preview].• To skip selecting the Front Screen Clock format, press the Left Soft Key [Skip].12. “ DISPLAY EASY SET UP COMPLETE” will be displayed.BANNER To set your Personal or ERI Banner:PERSONAL BANNER The Personal Banner can be up to 16 characters and is displayed on your phone’s screen in standby mode.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 2. Banner, 1. Personal Banner.2. Enter your banner text (up to 16 characters) then press the OK Key [OK].ERI BANNER If you use ERI Service, ERI Text is shown on the sub banner.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 2. Banner, 2. ERI Banner.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].BACKLIGHT To set the duration for backlight illumination for the Main Screen and Keypad:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 3. Backlight.2. Press “1. Display” or “2. Keypad”.3. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. 7 Seconds/15 Seconds/30 Seconds/Always On/Always Off Even if “Always On” is selected for the Backlight setting, the backlight will turn off when the phone is closed. WALLPAPER To choose the kind of Main LCD or Front LCD background to be displayed on the phone:MAIN SCREEN To choose the kind of Main LCD background to be displayed on the phone:Menu Function − Chapter 5 71SettingsSettings080803_CDM8975_RAP_REV00.indd 70-71080803_CDM8975_RAP_REV00.indd 70-71 2008.8.25 5:31:12 PM2008.8.25 5:31:12 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-6.png)
![1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 4. Wallpaper, 1. Main Screen.2. Press “1. My Pictures” or “2. My Videos”.3. Select from the available screens, then press the OK Key [OK]. To view an image, press the Left Soft Key [View]. To play a video clip, press the Left Soft Key [Play].4. Press the Right Soft Key [Get New], “1. Get New Applications” to download other available selections.FRONT SCREEN To choose the Front LCD background to be displayed on the phone:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 4. Wallpaper, 2. Front Screen.2. Select from the available screens, then press the OK Key [OK]. To view the image, press the Left Soft Key [View]. 3. Press the Right Soft Key [Get New], “1. Get New Applications” to download other available selections.DISPLAY THEMES To choose the background screen:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 5. Display Themes.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [SET]. Classic/Modern/White/WineMAIN MENU SETTINGS To change the Main Menu layout and type:TO SET TAB MENU LAYOUT 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 1. Menu Layout.2. Press the Directional Key up or down to select “Tab”, and then press the OK Key [OK].72 Chapter 5 − Menu FunctionSettingsSettingsRESET TAB MENU LAYOUT To reset to the main menu layout: 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 2. Reset Menu Layout.2. Press the OK Key [OK] to select “Yes”. TO SET LIST MENU LAYOUT 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 1. Menu Layout.2. Press the Directional Key up or down to select “List”, and then press the OK Key [OK].3. Menu type enables you to choose a main menu which contains menu items that best fits your needs. Press the Directional Key up or down to select a type and press the OK Key [OK] to set phone’s main menu. Communicator/MultimediaREPLACE LIST MENU ITEMS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 2. Replace Menu Items.2. Press the Directional Key up or down to select the item you want to replace then press the OK Key [Edit]. 3. Press the Directional Key up or down to select the item you want to replace it with then press the OK Key [Set]. My Ringtones/My Pictures/Bluetooth Menu/Calculator/My Videos/Games/V CAST Music/VCAST VideosPOSITION LIST MENU ITEMS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 3. Position Menu Items.2. Press the Directional Key up or down to select the item you want to move then press the OK Key [Move]. 3. Press the Directional Key up or down to change the position of this item then press the OK Key [Set].Menu Function − Chapter 5 73SettingsSettings080803_CDM8975_RAP_REV00.indd 72-73080803_CDM8975_RAP_REV00.indd 72-73 2008.8.25 5:31:15 PM2008.8.25 5:31:15 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-7.png)
![RESET LIST MENU SETTINGS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 4. Reset Menu Settings.2. Press the Directional Key up or down to select one of the following options, and then press the OK Key [OK]. • Menu Layout: To restore menu layout to the initial menu layout. (List).• Menu Items: To restore menu items to the initial content of the menu.• Item Positions: To restore menu items to their initial positions.• All: To restore all to your initial menu settings.TO SET GRID MENU LAYOUT 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 1. Menu Layout.2. Press the Directional Key up or down to select “Grid”, and then press the OK Key [OK].3. Menu type enables you to choose a main menu which contains menu items that best fits your needs. Press the Directional Key up or down to select a type and press the OK Key [OK] to set phone’s main menu. Communicator/MultimediaREPLACE GRID MENU ITEMS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 2. Replace Menu Items.2. Press the Directional Key up, down, left or right to select the item you want to replace then press the OK Key [Edit]. 3. Press the Directional Key up or down to select in the list the item you want to replace it with then press the OK Key [Set]. My Ringtones/My Pictures/Bluetooth Menu/Calculator/My Videos/Games/V CAST Music/VCAST VideosPOSITION GRID MENU ITEMS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 3. Position List Menu Items.2. Press the Directional Key up, down, left or right to select the item you want to move then press the OK Key [Move]. 74 Chapter 5 − Menu FunctionSettingsSettings3. Press the Directional Key up or down to change the position of this item then press the OK Key [SWAP].RESET GRID MENU SETTINGS 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 6. Main Menu Settings, 4. Reset Menu Settings.2. Press the Directional Key up or down to select one of the following options, and then press the OK Key [OK]. • Menu Layout: To restore menu layout to the initial menu layout. (Grid).• Menu Items: To restore menu items to the initial content of the menu.• Item Positions: To restore menu items to their initial positions.• All: To restore all to your initial menu settings.DIAL FONTS To set the font size:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 7. Dial Fonts.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. Normal/Large OnlyMENU FONT SIZE To set the menu font size:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 8. Menu Font Size.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. Normal/LargeCLOCK FORMAT To choose the kind of clock to be displayed on the Main LCD or Front LCD screen:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 5. Display Settings, 9. Clock Format.2. Press “1. Main Clock” or “2. Front Clock”.3. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Main Clock: Analog/Large Analog/Digital12/Large Digital12/Digital24/ Large Digital24/Off (“Digital12” is the default setting for this device.)• Front Clock: Digital/ Analog/Minimize/Off (“ Digital” is the default setting for this device.)Menu Function − Chapter 5 75SettingsSettings080803_CDM8975_RAP_REV00.indd 74-75080803_CDM8975_RAP_REV00.indd 74-75 2008.8.25 5:31:17 PM2008.8.25 5:31:17 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-8.png)
![PHONE SETTINGS AIRPLANE MODE In Airplane Mode, all menu functions can be accessed except making calls, receiving calls, data connection and Bluetooth®. Activating Airplane Mode will disable all wireless communications. In Airplane Mode, services that support Location On func-tions like Chaperone are temporarily disabled.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 1. Airplane Mode.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].SET SHORTCUTS Your phone offers you the option of assigning a shortcut key (Directional Key left, right, up, and down) to a favorite or often-used function. In addition, choose menu settings for each of the shortcut options under Set My Shortcuts (Directional Key right). In idle mode, press the Directional Key right to connect Set Shortcuts menu and press the Left Soft Key [Settings]. 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 2. Set Shortcuts, 1. Set My Shortcuts.2. Press the Directional Key up or down to select “Shortcut 1”, “Shortcut 2”, “ Shortcut 3”, or “Shortcut 4”, and then press the OK Key [SET].3. Press the Directional Key up or down to select one of the following functions, then press the OK Key [OK].• Alarm Clock / • Bluetooth Menu / • Bluetooth on/off / • Browse & Download / • Calculator / • Calendar / • Call Settings / • Chat / • Display Settings / • Extras / • Games / • Get New Extra / • Get New Game / • Get New Pictures / • Get New Ringtones / • Get New Browser & Download / • Media Center /• Messaging Inbox / • Mobile IM / • Mobile Web / • Mobile Web Mail /• Tunes & Tones / • My Music / • My Pictures / • My Ringtones / • My Sounds / • My Verizon / • My Videos / • New Contact / • New TXT Message / • New Picture Message /• New Video Message / • Notepad / • Online Album / • Phone Settings / • Picture & Video / • Play All Songs / • Settings & Tools / • Sounds Settings / • Sync Music / • Tools / • Download Application Alphabet The “Download Application Alphabet” option only appears when you have downloaded Brew Applications.76 Chapter 5 − Menu FunctionSettingsSettings In standby mode, pressing the Directional Key right will display the “My Shortcuts” screen. On the “My Shortcuts” screen, you can press the Directional Key up or down to select a function and then press the OK Key [OK] to access the function. On the “My Shortcuts” screen, you can relocate a function by pressing the Right Soft Key [Move], pressing the Directional Key up or down, and then pressing the OK Key [SAVE]. Or you can press the Left Soft Key [Settings] to Set My Shortcuts or Set Directional Keys.RESETTING MY SHORTCUTS To restore My Shortcuts to their original defaults:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 2. Set Shortcuts, 1. Set My Shortcuts.2. Press the Directional Key up or down to select “Shortcut 1”, “Shortcut 2”, “ Shortcut 3”, or “Shortcut 4”, and then press the Right Soft Key [Options].3. Press “1. Reset Shortcut (1, 2, 3, or 4)”, or “2. Reset My Shortcuts”.4. Press the Directional Key up or down to select “Yes”, then press the OK Key [OK].SET DIRECTIONAL KEYS In standby mode, you can specify the function that is accessed when you press the Directional Key up, down or left.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 2. Set Shortcuts, 2. Set Directional Keys.2. Press the Directional Key up or down to select “UP Directional Key”, “ LEFT Directional Key”, or “DOWN Directional Key”, and then press the OK Key [SET].3. Press the Directional Key up or down to select one of the following functions, and then press the OK Key [OK].• Alarm Clock / • Bluetooth Menu / • Bluetooth on/off / • Browse & Download / • Calculator / • Calendar / • Call Settings / • Chat / • Display Settings /• Extras / • Games / • Get New Extra / • Get New Game / • Get New Pictures / • Get New Ringtones / • Get New Browser & Download / • Media Center /• Messaging Inbox / • Mobile IM / • Mobile Web / • Mobile Web Mail /• Tunes & Tones / • My Music / • My Pictures / • My Ringtones / • My Sounds / • My Verizon / • My Videos / • New Contact / • New TXT Message / • New Picture Message /• New Video Message / • Notepad / • Online Album / • Phone Settings / • Picture & Video / • Play All Songs / • Settings & Tools / • Sounds Settings / • Sync Music / • Tools / • Download Application Alphabet The “Download Application Alphabet” option only appears when you have downloaded Brew Applications.Menu Function − Chapter 5 77SettingsSettings080803_CDM8975_RAP_REV00.indd 76-77080803_CDM8975_RAP_REV00.indd 76-77 2008.8.25 5:31:19 PM2008.8.25 5:31:19 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-9.png)
![RESETTING THE DIRECTIONAL KEY SETTINGS Use the following procedure to specify the default directional key settings.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 2. Set Shortcuts, 2. Set Directional Keys.2. Press the Directional Key up or down to select “UP Directional Key”, “ LEFT Directional Key”, or “DOWN Directional Key”, and then press the Right Soft Key [Options].3. Press “1. Reset (UP, LEFT or DOWN) Key”, or “2. Reset Directional Keys”.4. Press the Directional Key up or down to select “Yes”, then press the OK Key [OK].VOICE COMMANDS You can use voice commands to control your device.MODE 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 3. Voice Commands.2. Press “1. Mode”, then select one of the following:• Prompt: Reads out only the command prompts in voice command.• Readout: Reads out prompts, menus, outgoing contact name, status information, and confirming message recipient (contact name and type or number) when using the Send command.• Tones Only: Will only prompt the user with a tone (in place of the Readout prompt). If you change the setting details in the phone’s mode in Voice Commands, it will affect the mode in Sound (refer to page 94) or vice versa.CALL ALERT 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 3. Voice Commands.2. Press “2. Call Alert”, then select one of the following:• Ring Only: Deactivate Caller ID. You can hear ringtone only.• Caller ID + Ring: Playback the Caller ID once and then you will hear ringtone.• Name Repeat: Activate Caller ID. You will hear the caller’s details repeatedly. For more information about the enhanced voice commands supported by your device, see “Voice Tools”. Please refer to page 90 for more details.78 Chapter 5 − Menu FunctionSettingsSettingsLANGUAGE To set the bilingual feature to either English or Spanish:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 4. Language.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. English/EspañolLOCATION 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 5. Location.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Location On: Your location is now available to the network.• E911 Only: Your location will be hidden from the network and applications, except for 911. When “Lock Setting” is selected for Location Settings under “Restrictions” on the Security Menu, you will need to enter a Lock Code. The default Lock Code is “0000”.SECURITY The Security menu allows you to electronically secure the phone. The default lock code is the last 4 digits of your Mobile Telephone Number.EDIT CODES To set a new Lock Code:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 6. Security.2. Enter the four-digit lock code, then press the OK Key [OK].3. Press “1. Edit Codes”.4. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Phone Only: Allows you to edit the Lock Code for Security. (The default Lock Code is the last 4 digits of your Mobile Telephone Number.)• Calls & Services: Allows you to edit the Lock Code for Restrictions. (The default Lock Code is “0000”. )5. If “Phone Only” is selected, enter the new four-digit code in the “Enter New Code” field. Enter the new four-digit code again in the “Re-enter New Code” field.Menu Function − Chapter 5 79SettingsSettings080803_CDM8975_RAP_REV00.indd 78-79080803_CDM8975_RAP_REV00.indd 78-79 2008.8.25 5:31:21 PM2008.8.25 5:31:21 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-10.png)
![6. If “Calls & Services” is selected, enter the current lock code in the “Enter Current Code” field. Enter the new four-digit code in the “Enter New Code” field. Enter the new four-digit code again in the “Re-enter New Code” field.7. Press the OK Key [OK].RESTRICTIONS Use the following procedure to configure Location Setting, Calls and Messages restrictions.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 6. Security.2. Enter the four-digit Lock Code, then press the OK Key [OK]. The default Lock Code is last 4 digits of your Mobile Telephone Number.3. Press “2. Restrictions”.4. Enter the four-digit Lock Code again, then press the OK Key [OK].5. Select one of the following settings:• Location Setting: Unlock Setting/Lock Setting.• Calls: Incoming Calls/Outgoing Calls For Incoming Calls, set Allow All/Contacts Only/Block All. For Outgoing Calls, set Allow All/Contacts Only/Block All.• Messages: Incoming Messages/Outgoing Messages For Incoming Messages, set Allow All/Block All. For Outgoing Messages, set Allow All/Block All.• Dial-Up Modem: Allow/Block.PHONE LOCK SETTING This setting specifies whether the phone should be locked whenever it is turned on. Lock Mode prevents the unauthorized use of your phone. Once the phone is locked, it is in restricted mode until the Lock Code is entered. You can still make emergency calls. You can modify the Lock Code using the new Lock code within the Security menu.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 6. Security.2. Enter the four-digit Lock Code, then press the OK Key [OK]. The default lock code is the last 4 digits of your Mobile Telephone Number.3. Press “3. Phone Lock Setting”.80 Chapter 5 − Menu FunctionSettingsSettings4. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Unlocked: Phone is unlocked.• On Power Up: Phone will lock when it is turned on.LOCK PHONE NOW Lock the phone now.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 6. Security.2. Enter the four-digit Lock Code, then press the OK Key [OK]. The default Lock Code is the last 4 digits of your mobile telephone number.3. Press “4. Lock Phone Now”.4. To unlock the phone, in standby mode, press the Right Soft Key [Unlock] and enter the four-digit Lock Code, then press the OK Key [OK].RESTORE PHONE To delete all User Data and restore all settings to their initial defaults:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 6. Security.2. Enter the four-digit Lock Code, then press the OK Key [OK].3. Press “5. Restore Phone”.4. After reading the warning message that appears, press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].5. After reading the message that appears, press the OK Key [OK].6. Follow the on-screen prompt, then press the OK Key [OK]. The phone will turn off and then back on again automatically.SYSTEM SELECT You can set your phone to search or roam on another network when you are not in your home area. Leave this setting as default unless you want to alter the system selection as instructed by your service provider.Menu Function − Chapter 5 81SettingsSettings080803_CDM8975_RAP_REV00.indd 80-81080803_CDM8975_RAP_REV00.indd 80-81 2008.8.25 5:31:23 PM2008.8.25 5:31:23 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-11.png)
![1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 7. System Select.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Automatic B: Scan radio channels based on the Automatic B setting.• Automatic A: Scan radio channels based on the Automatic A setting.• Home Only: Only within your home area or home affiliated area.NAM SELECTION Enables Auto NAM (Number Assignment Modules) or manually selects a NAM.AUTO NAM Automatically switches phone to proper NAM when you have multiple NAM registrations.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 8. NAM Selection.2. Press the Directional Key up or down to select “1. Auto NAM”, then press the OK Key [OK].3. Select “On/Off”, then press the OK Key [OK].CHANGE NAM 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 6. Phone Settings, 8. NAM Selection.2. Press the Directional Key up or down to select “2. Change NAM”, then press the OK Key [OK].3. Select “NAM 1 - VERIZON” or “NAM 2 - VERIZON” , then press the OK Key [OK].CALL SETTINGS ANSWER OPTIONS To determine how to handle an answered call:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 1. Answer Options.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [MARK]. Flip Open/Any Key/Auto w/ Hands-free. 82 Chapter 5 − Menu FunctionSettingsSettings “Flip Open” is the default setting for this device.3. Press the Left Soft Key [Done]. • When the phone is closed, the Auto w/ Hands-free Mode will not function, except when connected to a headset.• The Auto w/ Hands-free will function after about five seconds.• Auto w/ Hands-free is available only when connected to a headset or hands-free device. • The three functions can be used at the same time. • To answer all incoming calls, press the SEND Key . AUTO RETRY To set the length of time the phone waits before automatically redialing a number when the attempted call fails:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 2. Auto Retry.2. Press the Directional Key up or down to select the following settings, then press the OK Key [OK]. 10 Seconds/30 Seconds/60 Seconds/Off.TTY MODE You can attach a TTY device to your phone enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 3. TTY Mode.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK]. TTY Full/TTY + Talk/TTY + Hear/TTY Off.ONE TOUCH DIAL To initiate a speed dial call by holding down the speed dial digit:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 4. One Touch Dial.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK]. If One Touch Dial is disabled, Speed Dial numbers designated in your Contacts will not function. Menu Function − Chapter 5 83SettingsSettings080803_CDM8975_RAP_REV00.indd 82-83080803_CDM8975_RAP_REV00.indd 82-83 2008.8.25 5:31:24 PM2008.8.25 5:31:24 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-12.png)
![VOICE PRIVACY To turn the voice privacy feature On or Off:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 5. Voice Privacy.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].DTMF TONES To set the Key Tone length and touch tone playback speed:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 6. DTMF Tones.2. Press the Directional Key up or down to select one of the following settings, then press the OK Key [OK].• Normal: Sends out a tone for a fixed period of time even if you continue to press the key.• Long: Sends out a continuous tone for the duration the key is pressed and held.PTT MODE 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 7. Call Settings, 7. PTT Mode.2. Press the Directional Key up or down to select “On/Off”, then press the OK Key [OK].MEMORY SAVE OPTIONS To select whether to save to Phone Memory or to Card Memory when saving a file:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 1. Save Options.2. Press the Directional Key up or down to select one of the following settings, and then press the OK Key [OK]. Pictures/Videos/Sounds3. Press the Directional Key up or down to select one of the following settings, and then press the OK Key [OK]. Phone Memory/Card Memory84 Chapter 5 − Menu FunctionSettingsSettingsPHONE MEMORY Select this option to display Phone Memory information, and to delete or move files saved in Phone Memory.PHONE MEMORY USAGE To check the available Phone Memory capacity, used capacity, and total capacity:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 2. Phone Memory.2. Press “1. Phone Memory Usage”.3. Press the OK Key [OK] to return to the previous screen.DELETING AND MOVING FILES To delete files stored in Phone Memory, and to move files from Phone Memory to Card Memory:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 2. Phone Memory.2. Press the Directional Key up or down to select one of the following settings, and then press the OK Key [OK]. My Pictures/My Videos/My Ringtones/My Music/My Sounds3. Press the Right Soft Key [Options].4. Press the Directional Key up or down to select “1. Erase” if you want to delete a file or “2. Move” if you want to move a file to Card Memory, and then press the OK Key [OK].5. Press the Directional Key up or down to select a file, press the OK Key [MARK] or the Right Soft Key [Mark All], and then press the Left Soft Key [Done].6. Press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].MOVING ALL FILES TO CARD MEMORY To move all files from Phone Memory to Card Memory:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 2. Phone Memory.2. Press the Directional Key up or down to select “7. Move All To Card”, and then press the OK Key [OK].Menu Function − Chapter 5 85SettingsSettings080803_CDM8975_RAP_REV00.indd 84-85080803_CDM8975_RAP_REV00.indd 84-85 2008.8.25 5:31:26 PM2008.8.25 5:31:26 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-13.png)
![3. Press the Directional Key up or down to select “Yes”, and then press the OK Key [OK]. Do not remove the memory card from the phone while a file is being moved to Card Memory.CARD MEMORY Select this option to display Card Memory information, and to delete or move files saved in Card Memory. Memory card must be inserted into the phone to perform these functions.CARD MEMORY USAGE To check the available Card Memory capacity, used capacity, and total capacity:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 3. Card Memory.2. Press “1. Card Memory Usage”.3. Press the OK Key [OK] to return to the previous screen.DELETING AND MOVING FILES To delete files stored in Card Memory, and to move files from Card Memory to Phone Memory:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 3. Card Memory.2. Press the Directional Key up or down to select one of the following settings, and then press the OK Key [OK]. My Pictures/My Videos/My Ringtones/My Music/My Sounds3. Press the Right Soft Key [Options].4. Press the Directional Key up or down to select “1. Erase” if you want to delete a file or “2. Move” if you want to move a file to Phone Memory, and then press the OK Key [OK].5. Press the Directional Key up or down to select a file, press the OK Key [MARK] or the Right Soft Key [Mark All], and then press the Left Soft Key [Done].6. Press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].86 Chapter 5 − Menu FunctionSettingsSettingsMOVING ALL FILES TO PHONE MEMORY To move all files from Card Memory to Phone Memory:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 8. Memory, 3. Card Memory.2. Press the Directional Key up or down to select “7. Move All To Phone”, and then press the OK Key [OK].3. Press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].PHONE INFO MY NUMBER To view your phone number:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 9. Phone Info, 1. My Number.2. The following information appears: Mobile Device Number (MDN)/Mobile Identifications Number (MIN)/Other device informationSW/HW VERSION 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 9. Phone Info, 2. SW/HW Version. 2. Displays the Software Version/PRL Version/ERI Version/Browser Version/Media Center Version/MSUI Version/HW Version/MEID.3. Press the OK Key [OK] to return to the previous screen.ICON GLOSSARY To view all the icons and their meanings:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 9. Phone Info, 3. Icon Glossary.2. Press the OK Key [OK] to return to the previous screen. Please refer to page 10 for more details about “Display Indicators”.SOFTWARE UPDATE The update phone firmware (software) option allows you to download and update the software in your phone automatically. Only the internal software is updated; no Contacts entries or other information saved to your phone will be deleted.Menu Function − Chapter 5 87SettingsSettings080803_CDM8975_RAP_REV00.indd 86-87080803_CDM8975_RAP_REV00.indd 86-87 2008.8.25 5:31:28 PM2008.8.25 5:31:28 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-14.png)
![STATUS Check the latest Software Download/Update status.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 9. Phone Info, 4. Software Update.2. Select “1. Status”.CHECK NOW To check Download Server for new Software updates:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 9. Phone Info, 4. Software Update.2. Select “2. Check New”.SET UP WIZARD To set up options using the Set Up Wizard:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 0. Set Up Wizard. 2. Select the CALL SOUNDS ringer type by pressing the Directional Key up or down, then press the OK Key [SET]. To skip selecting the CALL SOUNDS ringer type, press the Left Soft Key [Skip].3. Select the CALL SOUNDS ringtone by pressing the Directional Key up or down, then press the OK Key [SET]. • To play the selected ringtone, press the Left Soft Key [Play].• To skip selecting the CALL SOUNDS ringtone, press the Left Soft Key [Skip].4. Select the Display Theme for your device by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected display theme image, press the Left Soft Key [Preview].• To skip selecting the Display Theme image, press the Left Soft Key [Skip].5. Select your device’s Main Menu layout by pressing the Directional Key up or down, then press the OK Key [SET].88 Chapter 5 − Menu FunctionSettingsSettings • To preview the selected main menu layout style, press the Left Soft Key [Preview].• To skip selecting the Main Menu Layout, press the Left Soft Key [Skip].6. Select the format of the Main Screen Clock by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected the Main Screen Clock format, press the Left Soft Key [Preview].• To skip selecting the Main Screen Clock format, press the Left Soft Key [Skip].7. Select the format of the Front Screen Clock by pressing the Directional Key up or down, then press the OK Key [SET]. • To preview the selected the Front Screen Clock format, press the Left Soft Key [Preview].• To skip selecting the Front Screen Clock format, press the Left Soft Key [Skip].8. “ SET UP COMPLETE” will be displayed.Menu Function − Chapter 5 89SettingsSettings080803_CDM8975_RAP_REV00.indd 88-89080803_CDM8975_RAP_REV00.indd 88-89 2008.8.25 5:31:29 PM2008.8.25 5:31:29 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-15.png)
![VOICE COMMANDS Your phone is equipped with an AVR (Advanced Voice Recognition) feature. This feature allows you to make calls or use the phone’s functions by simply using your voice. All you have to do is talk into the phone, and the phone will recognize your voice and complete tasks by itself.1. To access Voice Commands from standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands. Shortcut: In idle mode, press the Side Voice Key to access the Voice Commands menu.2. The phone displays the Command menu and prompts you to say the name of the command you want to use. To complete your task, simply follow the voice prompts. You can speak the name of the command after you hear a beep. You can hear a beep in the Tone Only Mode (Settings & Tools > Phone Settings > Voice Commands > Mode > Tones Only Mode) while you can see a prompt without a beep sound in the Prompt Mode or Readout Mode.3. Select one of the following options by pressing the Directional Key up or down, press the OK Key .• Call <Name or #> / • Send <MSG Type> / • Go To <Shortcut> / • Check <Item> / • Contact <Name> / • Play <Playlist> / • My Verizon / • Help In Voice Commands mode, press the Side Voice Key up or down to adjusts the voice commands volume.4. When it recognizes one of these commands, the phone launches the associated application. If the phone does not hear a command within approximately eight seconds, AVR mode will turn itself off. CALL <NAME OR #>Use the Call command to voice dial a name from your contact list or a phone number. When dialing a number, pronounce each digit, but do not pause noticeably between the digits.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. If calling a contact from your list, say Call <Name>. Your phone will ask you to confirm the name you said. Say “Yes” if it was repeated correctly. That phone number will be dialed. If there is more than one number saved for that contact, you will be asked to confirm which number to dial. Examples: - Call Tom Smith, - Call 617 555-1212, - Call Bob Carson’s mobile, - Call Dee Harper at Home.90 Chapter 5 − Menu FunctionVoice ToolsVoice ToolsSEND <MSG TYPE>Use the Send command to send a text or other type of message to a specified name or number.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Send” followed immediately by one of the following items:• Text / • Picture / • Video Examples: - Send Picture to Dee Harper’s Mobile, - Send Video to Tom Jones Mobile, - Send Text Tom Smith.GO TO <SHORTCUT>Use the Go To command to open an application on your phone. You can say ”Go To” by itself and be prompted to say the application name, or you can skip the prompt by saying ”Go To” followed by the application name.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Go To” followed immediately by one of the following items:• Contacts / • Recent Calls / • Messaging / • Media Center / • Settings & Tools / • Mobile Web / • V CAST Video / • My MusicCHECK <ITEM>The Check command lets you check status information for your phone. You can say “Check” or “Check Status” to see and hear all status information.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Check” followed immediately by one of the following items:• Status / • Voicemail / • Messages / • Missed Calls / • Time / • Signal Strength / • Battery / • VolumeCONTACTS <NAME>Use the Lookup command to retrieve and display information for any name stored in your contact list.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Lookup <Name>”.Examples: - Lookup Tom Jones.3. The View Contact page will be displayed for that contact name.Menu Function − Chapter 5 91Voice ToolsVoice Tools080803_CDM8975_RAP_REV00.indd 90-91080803_CDM8975_RAP_REV00.indd 90-91 2008.8.25 5:31:31 PM2008.8.25 5:31:31 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-16.png)
![PLAY <PLAYLIST>Use the Play command to playback one of the playlists. Say “PLAY” followed by a playlist and your phone will playback the recognized playlist for you.1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Play <Playlist>”. Say “Play All Songs” (to playback all songs saved in your phone.)MY VERIZON1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ My Verizon”.3. Your phone will make a web connection.HELP1. You will hear “Please say a command” and the Voice Commands menu will be displayed.2. S a y “ Help”.3. The Help guide will be displayed on your phone.VOICE COMMANDS SETTINGSDIGIT DIAL READOUT The Digit Dial Readout setting controls if digits are read out when you type in a phone number with the keypad.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “1. Digit Dial Readout”.3. Select “On/Off” by pressing the Directional Key up or down, then press the OK Key [OK].CONFIRMATION When voice recognition is not confident it has recognized a name or number correctly, it will show you a list of up to three choices. You can control when choice lists appear.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “2. Confirmation”.92 Chapter 5 − Menu FunctionVoice ToolsVoice Tools3. Select “Automatic”, “Always Confirm” or “Never Confirm” by pressing the Directional Key up or down, then press the OK Key [OK].SENSITIVITY The Sensitivity setting controls how the voice recognition software determines when a spoken word is a match. If you frequently experience the messages “Please Repeat...” or “No Match Found,” adjust the sensitivity toward Reject Less. If you frequently experience false activations (when the phone recognizes a name you didn’t say), adjust the sensitivity toward Most Sensitive.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “3. Sensitivity”.3. Select “Most Sensitive”, “ Recommended” or “Least Sensitive” b y pressing the Directional Key up or down, then press the OK Key [OK].ADAPTATION Voice Command is speaker independent, which means that no training or adaptation is required. Some users with heavy accents or unusual voice characteristics may find difficulty in achieving high accuracy with speaker independent Voice Command, so the Adapt Voice feature allows users to dramatically improve the recognition accuracy through adaptation. Users who get acceptable recognition accuracy will find no additional benefit to performing the Adapt Voice adaptation.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “4. Adaptation”.3. Select “1. Adapt Voice” or “2. Reset Voice” by pressing the Directional Key up or down, then press the OK Key [OK].• Adapt Voice: Requires that you make recordings of your voice to customize the voice recognitions system. It will take a few minutes.• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to the factory default settings. “Reset Voice” menu option only appears after you finish the “Adapt Voice” process.4. Wait for the beep, and then repeat the sentences using a normal tone of voice.Menu Function − Chapter 5 93Voice ToolsVoice Tools080803_CDM8975_RAP_REV00.indd 92-93080803_CDM8975_RAP_REV00.indd 92-93 2008.8.25 5:31:32 PM2008.8.25 5:31:32 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-17.png)
![5. Repeat steps 1-4. When you are finished with a full session, you will reach a screen that reads “Adaptation Complete”.PROMPTS Allows you to select the voice command system characteristics.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “5. Prompts”.3. Select “1. Mode” or “2. Audio playback” by pressing the Directional Key up or down, then press the OK Key [OK].• Mode: Select the voice command system mode from the following:- Prompts: For handset to read out voice command prompts.- Readout: For handset to read out prompts, dialing digits and menus.- Tones Only: For handset to prompt you with a tone only.• Audio playback: Allows audio playback to play through the speakerphone or through the earpiece. Select “Automatic”, “ Speakerphone” or “Earpiece” by pressing the Directional Key up or down.CALL ALERT Provides audible readout of the phone number and/or name (if in your contact list) of an incoming call.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “6. Call Alert”.3. Select “Ring Only”, “ Caller ID + Ring” or “Name Repeat” by pressing the Directional Key up or down, then press the OK Key [OK].ABOUT 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 1. Voice Commands.2. Press the Right Soft Key [Settings], “7. About”.3. The VoiceSignal version appears.4. To return to the previous screen, then press the OK Key [OK].94 Chapter 5 − Menu FunctionVoice ToolsVoice ToolsCALCULATOR The Calculator allows you to perform simple mathematical calculations. To access the calculator:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 2. Calculator.2. Follow the instructions below to calculate 8×6÷4-2.5=9.5• Input 8 and then press the Directional Key right.• Input 6 and then press the Directional Key left.• Input 4 and then press the Directional Key down.• Input 2 and then press the to input (.).• Press 5.• Then press the OK Key and you will see the answer (9.5).3. To reset, press the Left Soft Key [Clear]. • Directional Key right : X, Directional Key down : -, Directional Key left : ÷, Directional Key up : +, * Key : ., Left Soft Key : Clear, OK Key : =. • To change the displayed number from positive (+) to negative (-) and vice versa, press # Key .• Press the Right Soft Key [Operator] to use parenthesis “1. (”, “ 2. )” and “3. Exponent”.CALENDAR The Calendar tool provides easy and convenient access to your schedule. Simply store your appointments and your phone will alert you to them.1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 3. Calendar. Shortcut: In idle mode, press the Directional Key down to access Calendar.2. Press the Directional Key up, down, left or right to highlight the scheduled day.3. Press the Left Soft Key [Add].4. The Appointment field is highlighted. Enter the name of the event. Press the Directional Key down to set the other fields for the event:APPOINTMENT Use the keypad to enter an appointment in your schedule.START TIME Use the keypad to set a start time and press the Left Soft Key for “am/pm”.Menu Function − Chapter 5 95ToolsTools080803_CDM8975_RAP_REV00.indd 94-95080803_CDM8975_RAP_REV00.indd 94-95 2008.8.25 5:31:34 PM2008.8.25 5:31:34 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-18.png)
![END TIME Use the keypad to set a end time and press the Left Soft Key for “am/pm”.START DATE Use the keypad to change or enter the start date.RECURRENCE Press the Directional Key left or right to set the recurrence of the event (Once, Daily, Weekly, Monthly, Yearly). END DATE Use the keypad to change or enter the end date.TIME ZONES If the Time Zone needs to be adjusted, press the Left Soft Key [Set]. Press the Directional Key up or down to select a new time zone then press the OK Key [OK].• OFF / • EST / • EDT / • CST / • C D T / • MST / • M D T / • PST / • P D T / • AKST / • AKDT / • HAST / • HADT / • GMT/UTC ALERT Press the Left Soft Key [Set] to select a new ringtone. Press the Directional Key up or down to highlight a ringtone then press the OK Key [OK]. Press the Left Soft Key [Play] to preview a ringtone.VIBRATE Press the Directional Key left or right to set “On/Off”.REMINDER Press the Directional Key left or right to select an alert time interval option.• On Time / • 5 min before / • 10 min before / • 15 min before5. Press the OK Key [SAVE] to save it. The date of the event will be marked on your calendar.VIEW PLAN LIST1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 3. Calendar.2. Press the Directional Key up, down, left or right to choose the event then press the OK Key [VIEW].96 Chapter 5 − Menu FunctionToolsToolsERASE SAVED EVENT1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 3. Calendar.2. Press the Directional Key up, down, left or right to choose the event then press the OK Key [VIEW].3. Press the Left Soft Key [Erase], then press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].ERASE ALL PASSED EVENTS1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 3. Calendar.2. Press the Directional Key up, down, left or right to choose the event then press the OK Key [VIEW].3. Press the Right Soft Key [Options], “6. Erase Passed”, then press the Directional Key up or down to select “Yes”, then press the OK Key [OK].ALARM CLOCK The Alarm Clock tool allows you to set up to three alarms. When you set an alarm, the current time is displayed at the top of the screen. When the alarm goes off, Alarm 1 (or 2 or 3, as applicable) will be displayed on the LCD screen and the alarm will sound. 1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 4. Alarm Clock.2. Press the Directional Key up or down to highlight an Alarm (1, 2, or 3), then press the OK Key [OK].3. The setting field will be highlighted. Press the Directional Key down to select alarm options.ALARM Press the Directional Key left or right to select “On/Off”.TIME Use the keypad to set a time for the alarm and press the Left Soft Key for “am/pm”.Menu Function − Chapter 5 97ToolsTools080803_CDM8975_RAP_REV00.indd 96-97080803_CDM8975_RAP_REV00.indd 96-97 2008.8.25 5:31:36 PM2008.8.25 5:31:36 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-19.png)
![FREQUENCY Press the Directional Key left or right to select a setting for the alarm (Once, Daily, Mon - Fri, Weekends).RINGER Press the Left Soft Key [Set] to “1. Get New Ringtones” or select the alert tone you wish to set. Press the Left Soft Key [Play] to preview a ringtone. Press the OK Key [OK] to make your selection.4. To save an alarm setting, press the OK Key [SAVE].TURN ON/OFF THE ALARM SETTING1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 4. Alarm Clock.2. Press the Directional Key up or down to highlight an Alarm (1, 2, or 3), then press the Right Soft Key [Options].3. Select “Turn On/Turn Off” then press the OK Key [OK].RESET THE ALARM SETTING1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 4. Alarm Clock.2. Press the Directional Key up or down to highlight an Alarm (1, 2, or 3), then press the Right Soft Key [Options].3. Select “Reset Alarm”, then press the Directional Key up or down to select “Yes”, then press the OK Key [OK].RESET ALL ALARM SETTINGS1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 4. Alarm Clock.2. Press the Directional Key up or down to highlight an Alarm (1, 2, or 3), then press the Right Soft Key [Options].3. Select “Reset All”, then press the Directional Key up or down to select “Yes”, and then press the OK Key [OK].98 Chapter 5 − Menu FunctionToolsToolsSTOP WATCH Simultaneously times up to eight different events. To operate the stop watch:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 5. Stop Watch.TO MEASURE A TIME PERIOD1. To start the stop watch, press the OK Key [START].2. To pause it, press the OK Key [STOP].3. To resume it, press the OK Key [START].4. To reset it, press the Right Soft Key [Reset].TO TIME UP TO EIGHT EVENTS AT ONCE:1. To start the stop watch, press the OK Key [START].2. To stop a time period and continue measuring another one, press the Left Soft Key [Lap].3. To stop the second and continue measuring a third one, press the Left Soft Key [Lap].4. To measure up to eight time periods, repeat the above steps.5. To stop the stop watch, press the OK Key [STOP].6. To review the results, press the Left Soft Key [View].7. To return to the stop watch, press the OK Key [OK].8. To reset it, press the Right Soft Key [Reset].WORLD CLOCK To display the time and date in pre-programmed cities:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 6. World Clock.2. Press the Left Soft Key [Cities] to access the CITIES LIST. Press the Directional Key up or down to select the city, then press the OK Key [OK]. Or, press the Directional Key left, or right to select your city using the world map.3. The world map appears with the city, its date, and time.Menu Function − Chapter 5 99ToolsTools080803_CDM8975_RAP_REV00.indd 98-99080803_CDM8975_RAP_REV00.indd 98-99 2008.8.25 5:31:38 PM2008.8.25 5:31:38 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-20.png)
![DST DAYLIGHT SAVING TIME SETTING1. Press the Right Soft Key [DST] to set the DST options. Press the Directional Key left or right to select City and then press the Directional Key down.2. Press the Directional Key left or right to turn DST (Daylight Savings Time) “On/Off”. Press the Directional Key down.3. Under “Start Date”, use the keypad to change or enter the start date and then press the Directional Key down.4. Under “Start Time”, use the keypad to set a start time and press the Left Soft Key for “am/pm” and then press the Directional Key down.5. Under “End Date”, use the keypad to change or enter the end date and then press the Directional Key down.6. Under “End Time”, use the keypad to set a end time and press the Left Soft Key for “am/pm”.7. To save a DST setting, press the OK Key [SAVE].NOTEPAD Your phone includes an internal notepad that can be used to compose and store reminders and notes. To create a note:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 7. Notepad.2. Press the Left Soft Key [New] to write a new note. When you are done, press the OK Key [SAVE].VIEW SAVED MEMOTo view a saved memo:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 7. Notepad.2. Press the OK Key [VIEW] to view a selected Note.100 Chapter 5 − Menu FunctionToolsToolsERASE SAVED MEMOTo erase a saved memo:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 7. Notepad.2. Press the Right Soft Key [Options], then select “Erase.”3. Press the OK Key [OK] to select “Yes.”ERASE ALL SAVED MEMOSTo erase all saved memos:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 2. Tools, 7. Notepad.2. Press the Right Soft Key [Options], then select “Erase All.”3. Press the OK Key [OK] to select “Yes.”Menu Function − Chapter 5 101ToolsTools080803_CDM8975_RAP_REV00.indd 100-101080803_CDM8975_RAP_REV00.indd 100-101 2008.8.25 5:31:40 PM2008.8.25 5:31:40 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-21.png)
![MY VERIZON To access your Verizon account information:1. From standby mode, press the OK Key [MENU], the Directional Key right twice for SETTINGS & TOOLS, and press 1. My Verizon. Shortcut: In idle mode, press the Directional Key left to access My Verizon.102 Chapter 5 − Menu FunctionMy VerizonMy VerizonMEDIA CENTERCHAPTER 6MEDIA CENTERYour phone provides a unique feature -Media Center- that enablesyou to download ringtones, wallpapers, games and more from yournetwork to your phone. Please contact your service provider for theavailability of these services.Using the microSD cardMusic & TonesPicture & VideoGamesMobile WebBrowse & DownloadExtrasMedia center info080803_CDM8975_RAP_REV00.indd 102-103080803_CDM8975_RAP_REV00.indd 102-103 2008.8.25 5:31:41 PM2008.8.25 5:31:41 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-22.png)
![USING THE microSD CARDThe microSD card stores sounds, images, photos and videos, music, and other files. The microSD card is sold separately, it is not included with the phone.INSTALLING THE microSD CARDTo install your microSD card:1. With the microSD card slot opened and the gold contacts facing up, insert the microSD card into the slot located on the lower right side of your phone.2. Push the card in until it clicks into place. “MEMORY CARD DETECTED” will appear on the display. Close the microSD card slot. To prevent possible damages, please keep microSD card slot closed at all times regardless of whether the microSD card is inserted or not.REMOVING THE microSD CARDTo remove the microSD card:1. Open the microSD card slot. Use your thumb to press and release the microSD card. It will pop-out to allow you to remove the card.2. Remove the card and close the microSD card slot.• When you insert the microSD card, make sure contact terminals face down.• Do not remove the microSD card while reading or writing files. Otherwise it could be damaged. For optimal performance, please use a microSD card.HOW IS MUSIC TRANSFERRED?Transfer from PC to Handset via USB CableTransfer fromPC to Handsetvia Memory cardMP3 Songs Yes YesWMA Songs (Music ripped from CDs, e.g. unprotected content)Yes Yes104 Chapter 6 − Media CentermicroSDmicroSDWMA Songs (Purchased from a Windows Media Player 10 music store such as V CAST Music, e.g. protected content)YesSong will notplay on thephone • Music acquired from another online store as part of a subscription service or purchased in another format other than WMA/MP3 will not be recognized by V CAST Music devices.• Music can be purchased and downloaded via V CAST Music with Rhapsody or V CAST Over The Air Music downloads through your PC. V CAST Music with Rhapsody will work with Windows Vista, XP, or 2000 (Only 32-bit versions of Windows are sup-ported.) Not available for Mac or Linux.• Only MP3 files with 192kbps or higher bitrate will be converted into WMA files.MUSIC & TONES V CAST MUSIC I RHAPSODYTo download music from the V CAST Music catalog directly to phone memory or to a removable memory card.1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 1. V CAST Music I Rhapsody to open the V CAST Music catalog.2. Browse or search the catalog to preview the songs you want.3. Select the music (song or album) that you want to purchase. Press the OK Key [BUY] to purchase.4. The CONFIRM PURCHASE screen will display the price and items you selected to purchase. Press the OK Key [BUY] to accept the terms.5. You’ll receive confirmation that your purchase was successful and your music is available for download. Press the OK Key to continue.6. Select Phone Memory or Memory Card for storage location. Press the OK Key to begin downloading. Wait for the phone to acquire the content license. Press the OK Key when download is complete.7. Press the Right Soft Key [Play] to play the downloaded song immediately. Or, press the Left Soft Key [My Music] to go to your Music Library of downloaded songs and albums.8. To return to idle mode, press the END Key .Media Center − Chapter 6 105Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 104-105080803_CDM8975_RAP_REV00.indd 104-105 2008.8.25 5:31:42 PM2008.8.25 5:31:42 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-23.png)
![GET NEW RINGTONESTo connect to MEDIA CENTER and download various ringtones:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 2. Get New Ringtones.2. If you have not previously downloaded any ringtones or ringtone applications, press “1. Get New Applications”. The Media Center browser will launch. From the Download menu, select a service provider and press the OK Key . Then select the application and press the OK Key to download it.3. To download a ringtone, select the application from the Get New Ringtones menu. Once the application has launched, follow the directions to download your ringtones. Downloaded ringtones are saved to the “3. My Ringtones” menu.MY RINGTONES TO PLAY DOWNLOADED TUNES OR TONES:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 3. My Ringtones.2. Select the tune or tone you want to play then press the OK Key [PLAY].3. To stop, press the OK Key [STOP].TO ERASE DOWNLOADED TUNES OR TONES:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 3. My Ringtones.2. Select the tune or tone you want to erase then press the Right Soft Key [Options].3. Select “1. Erase,” then select “Yes” by pressing the OK Key [OK].• If a “Downloaded Ringtone” is selected, press the Right Soft Key [Options] to choose from the following: 1. Erase: Erase the current ringtone from your phone. 2. Rename: To edit the ringtone’s title. 3. Lock: Lock/Unlock the current ringtone from your phone. 4. Erase All: To erase all the ringtones in your phone. 5. File Info: Displays information on the selected ringtone. • If a “Preloaded Sound” is selected, pressing Right Soft Key [Options], you can choose from the following: 1. Erase: Erase the current ringtone from your phone. 106 Chapter 6 − Media CenterMedia CenterMedia Center2. Erase All: To erase all the ringtones in your phone. 3. File Info: Displays information on the selected ringtone. TO ASSIGN DOWNLOADED TUNES OR TONES:To select a desired ringtone, or download a new ringtone:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 3. My Ringtones. 2. Press the Directional Key up or down to highlight ringtone, then press the Left Soft Key [Set As].• 1. Ringtone: A confirmation message appears.• 2. Contact ID: The “SET AS CONTACT ID“ screen appears. Select the Contact you want to assign the ringtone to, then press the OK Key [OK].• 3. Alert Sounds: Press the corresponding number key to set the ringtone for one of the following: “All Messages”/“TXT Message”/“Pic/Video/Voice Message”/“Voicemail”. Press the Directional Key up or down to highlight ringtone, then press the OK Key [OK].3. Press the Right Soft Key [Options] to access the following options:• Erase: Erase the current ringtone from your phone.• Rename: To edit the ringtone’s title. (This option only appears for a downloaded ringtone)• Lock/Unlock: Lock or unlock the current ringtone in your phone. (This option only appears for a downloaded ringtone)• Erase All: To erase all the ringtones in your phone.• File Info: Displays information on the selected ringtone.MY MUSICTo playback and manage music stored in your phone’s memory and on a memory card:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 4. My Music.2. The Music Library screen appears in the display with the following options:• 1. Genres / • 2. Artists / • 3. Albums / • 4. Songs / • 5. Playlists / • 6. Inbox /• 7. Play All / • 8. Shuffle3. To play a song, select “4. Songs”, scroll through the list of downloaded songs then press the OK Key [Play]. To view your Playlists, select “5. Playlists”. Select “6. Play All” to play all your music, or select “7. Shuffle” to play your songs in random order.4. Press the Left Soft Key [Repeat] to replay the song. Press the Right Soft Key [Options] to “1. Play All”, “ 2. Shuffle”, Media Center − Chapter 6 107Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 106-107080803_CDM8975_RAP_REV00.indd 106-107 2008.8.25 5:31:44 PM2008.8.25 5:31:44 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-24.png)
![“3. My Music”, “ 4. Shop”, “ 5. Listeners also liked”, “ 6. Help”.5. Press the Directional Key left to start the song over again. Press the Directional Key right to skip to the next song if there are other songs to be played. Press the OK Key [OK] to pause or play the song. If you press and hold the Directional Key left, the song rewinds and if you hold the Directional Key right, the song fast forwards. MY SOUNDSTo select a desired sound or record a new sound:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 5. My Sounds.2. Press the Directional Key up or down to highlight the sound, then press the OK Key [PLAY] to hear the sound. Press the OK Key [STOP] to stop playing the sound.3. Press the Right Soft Key [Options] to access the following options:• DOWNLOADED or RECORDED SOUND: Send: To send a sound. To Online Album: To upload selected sound to picture server. Rename: To edit the sound’s title. Move: To move the selected sound to the other save location. This option only appears if a memory card is inserted. Lock/Unlock: Lock or unlock the selected sound in your phone. Erase: To erase a selected sound in your phone. Erase All: To erase all the sounds in your phone. File Info: Displays information on the selected sound. • PRELOADED SOUND: Send: To send a sound. To Online Album: To upload selected sound to picture server. File Info: Displays information on the selected sound.RECORDING NEW SOUNDSTo record a new sound:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 5. My Sounds.2. Press “1. Record New”.3. Press the OK Key [OK] to begin recording. When done, press the OK Key [STOP] to finish recording. The recording is automatically saved to your “My Sounds” list.4. Your recording is saved with a number. To rename your recording, 108 Chapter 6 − Media CenterMedia CenterMedia Centerscroll to it with the Directional Key in the My Sounds menu, then press the Right Soft Key [Options].5. Press “3. Rename”.6. Press and hold the Clear Key to erase the number.7. Enter the new name for your recording, then press the OK Key [OK].TO ERASE A SOUND:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 1. Music & Tones, 5. My Sounds.2. Press the Directional Key up or down to select the sound you want to erase, and then press the Right Soft Key [Options]. 3. Press “5. Erase”. “ ERASE SOUND FROM MY SOUNDS AND SETTINGS?” will appear on your display.4. Press the OK Key [OK] to select “Yes.” A confirmation message appears. Your phone comes with 5 preloaded sounds: Clapping, Crowd roar, Happy Birthday, Rainforest, and Train. These cannot be erased. SYNC MUSIC SYNC YOUR MUSIC FROM YOUR PC TO YOUR V CAST MUSIC WITH RHAPSODY® CAPABLE PHONEThis option allows you to transfer music files from your PC. In order to use this option, you must install V CAST Music with Rhapsody on your PC.1. Open V CAST Music with Rhapsody software. Don’t have V CAST MUSIC with Rhapsody software? Download it for free at www.verizonwireless.com/music.2. Plug in the USB cable (purchased separately) to your phone and connect it to a USB port on your PC.3. From the main screen on your phone, the SYNC MUSIC V CAST MOBILE PHONE display appears. Your phone should display the message: Connected.4. Drag and drop the song(s) you want to sync from My Library, to your V CAST Music with Rhapsody mobile phone, listed under the Sources tab. Once synchronization is complete, press the END/Power key (“Picture”) and disconnect the USB cable (purchased separately).Media Center − Chapter 6 109Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 108-109080803_CDM8975_RAP_REV00.indd 108-109 2008.8.25 5:31:46 PM2008.8.25 5:31:46 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-25.png)
![5. Under the “Music & Tones” menu, open “My Music” to view and play your music. • A compatible USB cable (included in-box) is required for syncing.• V CAST Over The Air Music downloads are not available. Music can be purchased and downloaded via V CAST Music with Rhapsody through your PC. V CAST Music with Rhapsody will work with Windows Vista, XP, or 2000 (Only 32-bit versions of Windows are supported.) Not available for Mac or Linux.PICTURE & VIDEO V CAST VIDEOS V CAST, the next generation wireless technology that unveils a whole new multimedia experience at your fingertips, provides access to vibrant, full-color content from some of the biggest names in entertainment. V CAST is your link to video on demand, which allows you to view or download video clips that contain breaking news, sports highlights, weather and more. For additional information regarding V CAST Videos and its use, see www.verizonwireless.com.TO BROWSE, SELECT AND PLAY VIDEO CLIPS:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 1. V CAST Videos.2. Press the Directional Key up or down to select the V CAST Videos category you want, and then press the OK Key [OK].3. Press the Directional Key up or down to select the video, and then press the OK Key [VIEW].4. Press the OK Key [OK] to select “Yes.” After connection and buffering occurs, the video clip begins.TO DOWNLOADING A VIDEO CLIP:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 1. V CAST Videos.2. Press the Directional Key up or down to select a video you want to save, and then press the OK Key [SAVE]. The video clip will be saved to your “My Videos” list.3. Press the OK Key [OK] to select “Yes.” The video download begins.110 Chapter 6 − Media CenterMedia CenterMedia CenterGET NEW PICTURES To connect to MEDIA CENTER and download a variety of Pictures (images):1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 2. Get New Pictures.2. Press “1. Get New Applications”. Media Center will launch and take you to the download menu.3. Press the Directional Key up or down to select a provider’s browser, and then press the OK Key [OK].4. Press the Directional Key up or down, or press the OK Key to select Application.5. After executing the downloaded application, download the desired picture. The downloaded contents are saved in “My Pictures”. The downloaded application will be included in the list displayed when you access: Get New Pictures > 1. Get New Applications.MY PICTURES In My Pictures you can view all the pictures you have taken, store selected images in your phone, send pictures to the Online Album, delete images and access additional picture options.1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 3. My Pictures.2. Press the Directional Key up, down, left or right to select your desired pictures, then press the Right Soft Key [Options].3. Select one of the following options:• Send: To send a picture message. • Send by Bluetooth: To access Bluetooth Menu.• Set As: Assigns the selected picture to display for specific tasks. (Wallpaper/Picture ID)• To Online Album: Access the Online Album. • Take Picture: Take a new picture.• Get New Pictures: Download various pictures.• Rename: Rename the selected picture. • Move: To move the picture to another save location. This only appears when a memory card is inserted.• Lock/Unlock: Lock or unlock the selected picture. Locked pictures cannot be deleted by the Erase All function. This option only appears for pictures you downloaded or took with the camera.• Erase All: To erase all the pictures in your phone. (From Card/From Phone)• File Info: Displays information about the selected picture. (File Name/Date/Time/Resolution/Size) Media Center − Chapter 6 111Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 110-111080803_CDM8975_RAP_REV00.indd 110-111 2008.8.25 5:31:48 PM2008.8.25 5:31:48 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-26.png)
![TO ERASE THE CURRENT PICTURE:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 3. My Pictures.2. Press the Directional Key up, down, left or right to select the picture you want to erase, and then press the Left Soft Key [Erase]. “ERASE PICTURE FROM MY PICTURES AND SETTINGS?” will appear on your display.3. Press the OK Key [OK] to select “Yes”. A confirmation message appears.MY VIDEOS In My Videos you can view all the videos you have recorded, store selected videos in your phone, send videos to the Online Album, delete videos and access additional video options.1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 4. My Videos.2. Press the Directional Key up, down, left or right to select your desired videos, then press the Right Soft Key [Options].3. Select one of the following options:• Send: To send a video message. • Send by Bluetooth: To access Bluetooth Menu.• Record Video: Record a new video clip.• To Online Album: Access the Online Album. • V CAST Videos: Download various video clips.• Set As: Assigns the selected picture to display for specific tasks. (Wallpaper/Contact ID)• Rename: Rename the selected video clip. • Move: To move the video clip to another save location. This only appears when a memory card is inserted.• Lock/Unlock: Lock or unlock the selected video clip. Locked video clip cannot be deleted by the Erase All function. This option only appears for video clips you downloaded or record with the camera.• Erase All: To erase all the video clips in your phone. (From Card/From Phone)• File Info: Displays information about the selected picture. (File Name/Date/Time/Duration/Size) TO ERASE THE CURRENT VIDEO CLIP:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 4. My Videos.2. Press the Directional Key up, down, left or right to select the picture you want to erase, and then press the Left Soft Key [Erase]. “ERASE VIDEO FROM MY VIDEOS AND SETTINGS?” will appear on your display.112 Chapter 6 − Media CenterMedia CenterMedia Center3. Press the OK Key [OK] to select “Yes”. A confirmation message appears.TAKE PICTURE 1. To access the camera, press the Side Camera Key . 2. Point the camera lens at your subject. You can check the picture framing through the display screen.• Press the Directional Key left/right: Zoom Down/Up. (Except 1280X960 mode). • Pressing the Right Soft Key [Options], you can choose from the following: 1. Resolution: To select a resolution for a picture. (1280x960/640x480/320x240/160x120)2. Self Timer: To activate the camera’s timer function. (Off/3 Seconds/5 Seconds/10 Seconds)3. Brightness: To adjust the brightness up/down( -2, -1, 0, +1, +2).4. White Balance: To select white balance. (Auto/Sunny/Cloudy/Tungsten/Fluorescent/Darkness)5. Shutter Sound: To select a shutter sound. (Shutter/Silent/Say “Cheez”/Ready! 123)6. Color Effects: To select color effect among the following: (Normal/Antique/Black & White/Negative)7. Capture Mode: To select Capture mode “Landscape” or “Portrait”.8. Multishot: To select a multishot mode among the following: (Off/4/6/8)9. Sub Display: To take a picture of yourself by checking the view on the front LCD. To view captured images, press the Left Soft Key [My Pics].3. Press the Side Camera Key or press the OK Key [TAKE] to take the picture.4. After taking the picture it will be displayed. To save the picture, press the Left Soft Key [Save]. To take another picture without saving the picture you just took, press the Right Soft Key [Erase]. To send the picture to someone, press the OK Key [SEND].RECORD VIDEO 1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 6. Record Video. 2. Point the camera lens at your subject. You can check the picture framing through the display screen.• Press the Directional Key left/right: Zoom Down/Up. • Pressing the Right Soft Key [Options], you can choose from the following: 1. Brightness: To adjust the brightness up/down( -2, -1, 0, +1, +2).2. White Balance: To select white balance. (Auto/Sunny/Cloudy/Tungsten/Fluorescent/Darkness)3. Mute/Unmute: Phone is mute or unmute while recording a video.Media Center − Chapter 6 113Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 112-113080803_CDM8975_RAP_REV00.indd 112-113 2008.8.25 5:31:49 PM2008.8.25 5:31:49 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-27.png)
![4. Sub Display: To recording a video of yourself by checking the view on the front LCD. To view recorded videos, press the Left Soft Key [Videos].3. Press the Side Camera Key or press the OK Key [REC] to take the video. To pause/resume the video record, press the Left Soft Key [Pause/Resume]. To stop recording, press the OK Key [STOP].4. After recording the video it will be displayed. To save the video, press the Left Soft Key [Save]. To recording another video without saving the video you just took, press the Right Soft Key [Erase]. To send the video to someone, press the OK Key [SEND].ONLINE ALBUMTo access Online Album:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 2. Picture & Video, 7. Online Album. The browser launches, and the Online Album sign-on screen appears.2. Follow the on-screen prompts.GAMES DOWNLOADING NEW GAMESTo download games and applications from the MEDIA CENTER server:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 3. Games. 2. Press the OK Key [OK] to “1. Get New Applications”.3. Choose the software you want from the list displayed on the screen.4. All applicable charges or fees will be incurred to download the selected application.5. Once download application, select “Yes” to run or “No” to return to the Games menu.PLAYING DOWNLOADED GAMES1. To play the game you downloaded, select the game then press the OK Key [PLAY] to run the application.114 Chapter 6 − Media CenterMedia CenterMedia CenterMOBILE WEB Now you can access news, sports, weather, and Email from your phone. Mobile Web 2.0 keeps you updated by providing access to up-to-date information such as news, sports, weather and stock quotes when you subscribe to Internet service with your service provider. Please contact your service provider for a list of available websites and service details.1. To start your Internet browser and access websites through your wireless handset press the Directional Key up. BROWSER MENUThe browser menu lists the actions necessary to operate the browser. To access, press the Directional Key up and then press the Right Soft Key [Menu].VZW HOME Returns the user to the home page.ADD FAVORITE Takes user to the VZW Add Favorite page. For favorites, page name and URL need to auto-populate.SEARCH Takes user to the VZW Search page.GO TO URL Takes user to the VZW Search > Go to Site page.SHOW URL Displays the current URL.BACK Returns to the previously viewed page.MANAGE MEMORY Displays the following list of options:• Clear Cache: Clears the cache.• Clear History: Clears the list of recently visited URLs.• Clear Cookies: Clears saved cookies.• Autofill: Automatically fills in character for browser recognized words.SETTINGS • Downloads: Selecting the “Downloads” item allows the user to enable/disable downloading images, background sounds, and object downloads when a URL is accessed.• Restart Browser: Selecting “Restart Browser” causes the history and cache to be cleared and returns the user to the homepage.• Scroll Mode: Selecting “Scroll Mode” from the Settings menu allows the user to select the way text scrolls and the scroll speed.• Send Referrer: When the “Send Referrer” item is selected from the Settings menu, the browser allows the user to turn on or off sending the referrer URL.Media Center − Chapter 6 115Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 114-115080803_CDM8975_RAP_REV00.indd 114-115 2008.8.25 5:31:51 PM2008.8.25 5:31:51 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-28.png)
![• Key Press Time Out: When the “Key Press Timeout” item is selected from the Settings menu, the browser allows the user to set the key press timeout as fast, medium or slow. Medium is 1.5 seconds, slow 2 seconds and fast is 1 second. The key press timeout is the period of time after which the cursor auto-advances to the next entry position. In most cases, a single key can be used to enter more than one character. Each time the key is pressed the last character of the line is replaced by the next choice for that key. As long as the same key is repressed within key press timeout, the last character cycles between all the choices for the key.• Connection Time Out: When the Connection Timeout item is selected from the Settings menu, the browser allows the user to set the connection timeout. The connection timeout determines how long the browser will wait for a response from the network for a network request.ADVANCED • About: Displays the name of the supplier of the Browser and the Browser SW version.• Refresh: Allows the user to reload the current URL.• History: Displays the previous 20 number of visited URLs, where X=20.• Encryption: Displays the following list of options.1. Authentication: Gives the option to turn Authentication Caching ON or OFF.2. Root Certificate: Shows the root security keys for TLS.3. Current Certificate: Shows the current site security key for TLS (if applicable).EXITPress the END Key to exit out of the browser and return to idle mode.BROWSE & DOWNLOAD DOWNLOADING NEW APPLICATIONSTo download Tools that can help you navigate to entertainment spots, restaurants, and provide you with up-to-date weather information:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER , and press 5. Browse & Download.2. Select “Mobile E-mail” or “VZ Navigator” with the Directional Key then, press the OK Key [OK].• Mobile E-mail: To connect to Brew Smartlink. • VZ Navigator: To connect to VZ Navigator.3. Press the OK Key [OK] for “1. Get New Applications”.116 Chapter 6 − Media CenterMedia CenterMedia CenterEXTRAS DOWNLOADING NEW APPLICATIONSTo download Applications:1. From standby mode, press the OK Key [MENU], the Directional Key left twice for MEDIA CENTER, and press 6. Extras.2. Press the OK Key [OK] for “1. Get New Applications”.MEDIA CENTER INFO To view App. Memory, Phone Memory, View Log, and Help information:1. From standby mode, press the OK Key [MENU].2. Press the Directional Key left twice for MEDIA CENTER.3. Press the Right Soft Key [Info].4. Press the Directional Key up or down to select one of the following settings, and then press the OK Key [OK]. • App. Memory / • Phone Memory / • View Log / • HelpMedia Center − Chapter 6 117Media CenterMedia Center080803_CDM8975_RAP_REV00.indd 116-117080803_CDM8975_RAP_REV00.indd 116-117 2008.8.25 5:31:52 PM2008.8.25 5:31:52 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-29.png)
![WHEN A NEW MESSAGE ARRIVES1. The following display appears when a new message arrives.2. To display the message, select “View Now” and then press the OK Key [OK]. NEW MESSAGE TXT MESSAGE 1. From standby mode, press the Left Soft Key [Message], and press 1. New Message.2. Press “1. TXT Message”. 3. Under “To:”, input the phone number and then press the OK Key [OK].• By pressing the Right Soft Key [Add], you can choose from the following: 1. From Contacts: Search for a phone number which is stored in the contacts list. 2. Recent Calls: Search for a phone number which is stored in the recent calls list. 3. Groups: Search the groups stored in the contacts list. 4. To Contacts: Save the number or email you’ve entered to the contacts list, when you enter the number.5. To PTT Contacts: Save the number or email you’ve entered to the PTT contacts list, when you enter the number. “To PTT Contacts” option appears only when the “PTT Mode” is set “On”.4. Under “Text:”, input a new TXT message. When completed, press the OK Key [SEND].• By pressing the Right Soft Key [Options], you can choose from the following: 1. Quick Text: Inserts already written sentences in TXT message. 2. Save As Draft: To save the TXT message. 3. Add: To attach Graphic, Sound, Name Card. • Graphic: Inserts simple graphic images in TXT message. • Sound: Inserts EMS sound in TXT message. • Add Name Card: Inserts name card in TXT message. 4. Edit Text Format: Allows you to edit the “Alignment”, “Font Size”, “Font Style”, “Font Color”, “Background Color”. • Alignment: Select “Left”, “Center” or “Right” by pressing the Directional Key left or right.• Font Size: Select “Small”, “Normal” or “Large” by pressing the Directional Key left or right.• Font Style: Select “Strikethrough”, “Normal”, “Bold”, “Italic” or “Underline” by pressing the Directional Key left or right.• Font Color: Select Font color by pressing the Directional Key left or right. • Background Color: Select Background color by pressing the Directional Key left or right.5. Priority Level: Select “High” or “Normal” by pressing the Directional Key up or down. 6. Cancel Message: To cancel message. 120 Chapter 7 − Messaging MenuMessagingMessaging As long as one field is complete in TXT Message, the message will be saved in the draft box. PICTURE MESSAGE 1. From standby mode, press the Left Soft Key [Message], and press 1. New Message.2. Press “2. Picture Message”.3. Under “To:”, input the phone number and then press the OK Key [OK].• By pressing the Right Soft Key [Add], you can choose from the following: 1. From Contacts: Search for a phone number which is stored in the contacts list. 2. Recent Calls: Search for a phone number which is stored in the recent calls list. 3. Groups: Search the groups stored in the contacts list. 4. To Online Album: To send Picture message by using online Address. 5. To Contacts: Save the number or email you’ve entered to the contacts list, when you enter the number.6. To PTT Contacts: Save the number or email you’ve entered to the PTT contacts list, when you enter the number. “To PTT Contacts” option appears only when the “PTT Mode” is set “On”.4. Under “Text:”, input a New Picture Message and then press the Directional Key down.5. Under “Picture:”, you can only insert/remove one picture. Press the Left Soft Key [My Pics] to select the picture you would like to send then press the OK Key [OK].6. Under “Sound:”, you can only insert/remove one sound. Press the Left Soft Key [Sounds] to select the sound you would like to send then press the OK Key [OK].7. Under “Subject:”, input a subject and then press the Directional Key down.8. Under “Name Card:”, you can insert your name card. Press the Left Soft Key [Add] select “1. My Name Card” or “2. Contacts” then press the OK Key [OK]. Select the card you’d like to send then press the OK Key [OK].9. Press the Right Soft Key [Options] to access the following:• Preview: To preview a written Picture Message. • Save As Draft: To save the Picture Message. • Add Quick Text: Inserts already written sentences in Picture Message. • Add Slide: To add a another message. • Priority Level: Select “High” or “Normal” by pressing the Directional Key up or down.• Remove Picture: To remove inserted picture in Picture field. • Remove Slide: To remove inserted Slide Message. • Remove Sound: To remove inserted sound in Sound field. • Remove Name Card: To remove inserted name card in Name Card field. Messaging Menu − Chapter 7 121MessagingMessaging080803_CDM8975_RAP_REV00.indd 120-121080803_CDM8975_RAP_REV00.indd 120-121 2008.8.25 5:31:54 PM2008.8.25 5:31:54 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-31.png)
![• Cancel Message: To cancel message.10. To send the Picture message, press the OK Key [SEND]. As long as one field is complete in Picture Message, the message will be saved in the draft box. VIDEO MESSAGE 1. From standby mode, press the Left Soft Key [Message], and press 1. New Message.2. Press “3. Video Message”.3. Under “To:”, input the phone number and then press the OK Key [OK].• By pressing the Right Soft Key [Add], you can choose from the following: 1. From Contacts: Search for a phone number which is stored in the contacts list. 2. Recent Calls: Search for a phone number which is stored in the recent calls list. 3. Groups: Search the groups stored in the contacts list. 4. To Online Album: To send Video message by using online Address. 5. To Contacts: Save the number or email you’ve entered to the contacts list, when you enter the number.6. To PTT Contacts: Save the number or email you’ve entered to the PTT contacts list, when you enter the number. “To PTT Contacts” option appears only when the “PTT Mode” is set “On”.4. Under “Text:”, input a New Video Message and then press the Directional Key down.5. Under “Video:”, you can only insert/remove one video clip. Press the Left Soft Key [Videos] to select the video clip you would like to send then press the OK Key [OK].6. Under “Subject:”, input a subject and then press the Directional Key down.7. Under “Name Card:”, you can insert your name card. Press the Left Soft Key [Add] select “1. My Name Card” or “2. Contacts” then press the OK Key [OK]. Select the card you’d like to send then press the OK Key [OK].8. Press the Right Soft Key [Options] to access the following:• Preview: To preview a written Video Message. • Save As Draft: To save the Video Message. • Add Quick Text: Inserts already written sentences in Video Message. • Priority Level: Select “High” or “Normal” by pressing the Directional Key up or down.• Remove Video: To remove inserted video clip in Video field. • Remove Name Card: To remove inserted name card in Name Card field. • Cancel Message: To cancel message.9. To send the Video message, press the OK Key [SEND].122 Chapter 7 − Messaging MenuMessagingMessaging As long as one field is complete in the Video Message, the message will be saved in the draft box.VOICE MESSAGE 1. From standby mode, press the Left Soft Key [Message], and press 1. New Message.2. Press “4. Voice Message”.3. To record a new Voice Memo, press the OK Key [OK] to start recording voice memo. Press the OK Key [STOP] to stop recording voice memo and save it.4. Under “To:”, input the phone number and then press the OK Key [OK], then press the Directional Key down.• By pressing the Right Soft Key [Add], you can choose from the following: 1. From Contacts: Search for a phone number which is stored in the contacts list. 2. Recent Calls: Search for a phone number which is stored in the recent calls list. 3. Groups: Search the groups stored in the contacts list. 4. To Online Album: To send Voice message by using online Address. 5. To Contacts: Save the number or email you’ve entered to the contacts list, when you enter the number.6. To PTT Contacts: Save the number or email you’ve entered to the PTT contacts list, when you enter the number. “To PTT Contacts” option appears only when the “PTT Mode” is set “On”.5. Under “Voice:”, you can only Record/Remove one Voice memo. Press the Left Soft Key [Record] to select the Voice you would like to send then press the OK Key [OK].6. Under “Text:”, input a New Voice Message and then press the Directional Key down.7. Under “Subject:”, input a subject and then press the Directional Key down.8. Under “Name Card”, you can insert your name card. Press the Left Soft Key [Add], select “1. My Name Card” or “2. Contacts” then press the OK Key [OK]. Select the card you’d like to send then press the OK Key [OK].9. Press the Right Soft Key [Options] to access the following:• Review: To preview a written Voice Message. • Save As Draft: To save the Voice Message. • Add Quick Text: Inserts already written sentences in Voice Message. • Priority Level: Select “High” or “Normal” by pressing the Directional Key up or down.• Remove Recording: To remove inserted recorded voice memo in Voice field. • Remove Name Card: To remove inserted name card in Name Card field. • Cancel Message: To cancel message.10. To send the Voice message, press the OK Key [SEND].Messaging Menu − Chapter 7 123MessagingMessaging080803_CDM8975_RAP_REV00.indd 122-123080803_CDM8975_RAP_REV00.indd 122-123 2008.8.25 5:31:56 PM2008.8.25 5:31:56 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-32.png)
![As long as one field is complete in the Voice Message, the message will be saved in the draft box. INBOX The Inbox manages received TXT, Picture, Video, Voice, Web Alert messages. To access:1. From standby mode, press the Left Soft Key [Message], and press 2. Inbox. 2. Select a message and then press the OK Key [OPEN]. The message is displayed. To delete a message, press the Left Soft Key [Erase], then press the OK Key [OK] to select “Yes”. MESSAGE ICON REFERENCE 3. Press the Right Soft Key [Options] to access the following:• Play Again: To play a received Video/Voice message. • Reply: Type your reply. • Erase Inbox: To erase all inbox message.• Reply W. Copy: Select to reply with the original message included. • Forward: Select to forward the TXT, Picture, Video or Voice message. • Save Picture (MMS Picture): Select to save a picture to the “My Pictures” folder.• Save As Ringtone (MMS Sound): Select to save a sound to the “My Ringtones” folder. • Save Sound (MMS Sound): Select to save a sound to the “My Sounds” folder • Save Objects (EMS Save Objects): Select to save a graphic, sound, name card.• Save Name Card: Select to save a name card to the contacts.• Save Quick Text: Select to save received text msg to “Quick Text”. • Add To Contacts: Select to save a number to contacts. • Add To PTT Contacts: Select to save number to PTT contacts. • Extract Addresses: To extract all Phone Numbers, Email Addresses and URLs from the received message. • Lock/Unlock: Select to lock or unlock the TXT, Picture, Video or Voice message.• Message Info: Select to show received TXT, Picture, Video or Voice message information. “Add To PTT Contacts” option appears only when the “PTT Mode” is set “On”.SENT Manages TXT, Picture, Video or Voice messages already sent or waiting to be sent.1. From standby mode, press the Left Soft Key [Message], and press 3. Sent. 2. Select a message and then press the OK Key [OPEN]. The message is displayed. To delete a message, press the Left Soft Key [Erase], then press the OK Key [OK] to select “Yes”.124 Chapter 7 − Messaging MenuMessagingMessagingMESSAGE ICON REFERENCE 3. With the message open, press the Right Soft Key [Options] to access the following:• Play Again: Select to play sent MMS message. • Forward: Select to forward the TXT, Picture, Video or Voice message. • Erase: To erase a sent message.• Resend: To resend a message.• Lock/Unlock: Select to lock or unlock the TXT, Picture, Video or Voice message.• Save Quick Text: Select to save sent text msg to “Quick Text”. • Add To Contacts: Select to save number to contacts. • Add To PTT Contacts: Select to save number to PTT contacts. • Erase Sent: To erase a sent message.• View Name Card: To view include name card with in message. • Message Info: Select to show received TXT, Picture, Video or Voice message information. “Add To PTT Contacts” option appears only when the “PTT Mode” is set “On”.DRAFTS Draft Folder contains any draft messages or saved messages. If message composition is interrupted by a voice call or other interrupting event, the message of the current composition is automatically saved in the drafts folder.1. From standby mode, press the Left Soft Key [Message], and press 4. Drafts. 2. Select a message and then press the OK Key [EDIT]. The message is displayed. 3. To delete a message, press the Left Soft Key [Erase], then press the OK Key [OK] to select “Yes”.MESSAGE ICON REFERENCE 4. Press the Right Soft Key [Options] to access the following:• Send: Select to send a selected message. • Lock/Unlock: Select to lock or unlock the TXT, Picture, Video or Voice message.• Add To Contacts: Select to save number to contacts. • Add To PTT Contacts: Select to save number to PTT contacts. • Erase Drafts: To erase all drafts messages. “Add To PTT Contacts” option appears only when the “PTT Mode” is set “On”.Messaging Menu − Chapter 7 125MessagingMessaging Lock MMS Drafts SMS/EMS Drafts Read Unread Lock Priority MMS Unread MMS Read EMS Unread EMS Read WAP Unread WAP Read Sent Lock Delivered Priority Sent Failed Incomplete Delivery080803_CDM8975_RAP_REV00.indd 124-125080803_CDM8975_RAP_REV00.indd 124-125 2008.8.25 5:31:58 PM2008.8.25 5:31:58 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-33.png)
![VOICEMAIL New voicemail alerts are sent via an SMS text message. These messages indicate how many new and urgent voicemails are in your voicemail box. Open the text message to view the number of new voice messages in your voicemail. If a caller leaves a callback number, this number will also be sent via an SMS text message.WHEN A NEW VOICEMAIL ARRIVESWhen you receive a new voicemail message you’ll hear a sound and a Voicemail appears in the display.1. To display the message, select “Listen Now” or “Listen Later” by pressing the Directional Key up or down.2. Press the OK Key [OK].TO ACCESS YOUR VOICE MAILBOX1. To dial voice mail directly, press * Key , 8 Key , 6 Key and then the SEND Key . Or, from standby mode press the Left Soft Key [Message]. Press 5.Voicemail then the SEND Key .2. Follow the prompts to enter your lock code and retrieve your messages.MOBILE IM LAUNCHING MOBILE IM1. From standby mode, press the Left Soft Key [Message], and press 6. Mobile IM, and then select “Mobile IM” for the Preloaded Mobile IM.2. The first time you access this feature an “Accept/Decline” screen will appear, select “Accept” by highlighting it and pressing the OK Key .3. Choose from “AIM”, “ WL Messenger” and “Yahoo!®”. Highlight the messenger service and press the OK Key [OK].4. Enter your Login ID and Password and then press the OK Key [Sing In] to Sign In.126 Chapter 7 − Messaging MenuMessagingMessagingDOWNLOAD NEW IM APPLICATIONS1. From standby mode, press the Left Soft Key [Message], then 6. Mobile IM, and press 1. Get New Applications.EMAIL 1. From standby mode, press the Left Soft Key [Message], and press 7. Email.2. Select “Mobile Email” or “Mobile Web Mail” by pressing the Directional Key up or down, press the OK Key [OK].• Mobile Email: To connect Brew Smartlink. • Mobile Web Mail: To connect WAP Browser. 3. Browser launches.4. Press the Directional Key up or down to select your Email provider, and then press the OK Key [OK].5. To send an Email, follow the on-screen prompts and functions.CHAT 1. From standby mode, press the Left Soft Key [Message], and press 8. Chat.2. Browser launches.3. Press the Directional Key up or down to select one of the displayed chat rooms, and then press the OK Key [OK].4. To chat with Internet Messenger users, follow the on-screen prompts and functions.ERASE ALL To erase all messages stored in your Inbox, Drafts or Sent folders:1. From standby mode, press the Left Soft Key [Message], then the Right Soft Key [Options].• Press “1. Erase Inbox” to erase all messages or only read message stored in the Inbox.• Press “2. Erase Drafts” to erase all messages stored in the Drafts folder.• Press “3. Erase Sent” to erase all messages stored in Sent Folder.• Press “4. Erase All” to erase all messages stored in the Inbox, Sent, and Drafts folders. Locked messages cannot be erased.Messaging Menu − Chapter 7 127MessagingMessaging080803_CDM8975_RAP_REV00.indd 126-127080803_CDM8975_RAP_REV00.indd 126-127 2008.8.25 5:32:0 PM2008.8.25 5:32:0 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-34.png)
![2. Select “Yes” to erase the selected messages, then press the OK Key [OK]. A confirmation message appears.SETTINGS To configure received message settings:1. From standby mode, press the Left Soft Key [Message], then the Left Soft Key again for [Settings].2. Press the Directional Key up or down to highlight one of the settings below, then press the OK Key [OK] to select it:ENTRY MODE Sets an Entry Mode as a default. For example, if Abc Mode is the default, its icon will appear.1. Select “Word”, “Abc”, “ABC” or “123” by pressing the Directional Key up or down then press the OK Key [OK].AUTO SAVE 1. Select “On”, “ Off” or “Prompt” by pressing the Directional Key up or down then press the OK Key [OK].• On: All sent messages saved in the Sent box. • Off: All sent messages not saved in the Sent box. • Prompt: “Yes”, “No” dialogue box displayed after sent message.AUTO ERASE Automatically erases inbox messages when new messages arrive.1. Select “On” or “Off” by pressing the Directional Key up or down then press the OK Key [OK].• On: Oldest message erased from Inbox automatically when Inbox is full. • Off: Oldest message not erased from Inbox automatically when Inbox is full.MESSAGING FONT SIZE 1. Select “Normal” or “Large” by pressing the Directional Key up or down then press the OK Key [OK].TXT AUTO VIEW 1. Select “On” or “Off” by pressing the Directional Key up or down then press the OK Key [OK].• On: TXT message displayed automatically. • Off: TXT message displayed by going to the Inbox or responding to interactive notification.128 Chapter 7 − Messaging MenuMessagingMessagingPICVIDEO AUTO RECEIVE 1. Select “On” or “Off” by pressing the Directional Key up or down then press the OK Key [OK].• On: Picture/Video message downloaded automatically. • Off: Picture/Video message must be retrieved from the Inbox or at new Picture/Video Message prompt.QUICK TEXT To create a new Quick Text or edit the Quick Text you have saved:1. Select a message from the list then press the OK Key [EDIT]. 2. To add a new Quick Text, press the Right Soft key [Options] to select “New”. Enter the new text then press the OK Key [SAVE]. 3. To move locate the saved Quick Text, press the Right Soft key [Options] to select “Move”. Press the Directional Key up or down to move locate then press the OK Key [SAVE]. 4. To erase a saved Quick Text, press the Left Soft Key [Erase]. Press the OK Key [OK] to select “Yes”.VOICEMAIL# 1. Input a new voicemail number or edit voicemail number then press the OK Key [OK].CALLBACK # Edits a default callback number so that the recipient can callback or reply.1. Select “On” or “Off” by pressing the Directional Key up or down then press the OK Key [OK].2. If “On” is selected, input a new callback number then press the OK Key [OK].SIGNATURE Create a signature that can be automatically inserted at the end of all TXT, Picture, Video and Voice messages.1. To deactivate Signature function, select “None”.2. To input a “Signature”, select “Custom”. Enter your signature in the text box then press the OK Key [OK].Messaging Menu − Chapter 7 129MessagingMessaging080803_CDM8975_RAP_REV00.indd 128-129080803_CDM8975_RAP_REV00.indd 128-129 2008.8.25 5:32:2 PM2008.8.25 5:32:2 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-35.png)
![network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.3 W/Kg and when worn on the body, as described in this user guide, is 1.05 W/Kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.The SAR testing for Body-worn operation was performed with a belt clip that provided a 20mm separation. The User’s Manual indicates that any holsters/clips used with this device should contain no metallic components.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea after searching on PP4RAP.Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.FCC HEARINGAID COMPATIBILITY HAC REGULATIONS FOR WIRELESS DEVICESOn July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hear-ing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box.The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interfer-136 Chapter 8 − Safety and WarrantySafetySafetyence, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise.The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use.In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation.The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.For information about hearing aids and digital wireless phone• Fcc Hearing Aid Compatibility and Volume Control http://www.fcc.gov/cgb/dro/hearing.html• Gallaudet University, RERC http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm• Self Help for Hard of Hearing People Inc. [SHHH] www.hearingloss.org/hat/TipsWirelessPhones.htm• The Hearing Aid Compatibility FCC Order http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-168A1.pdfSafety and Warranty − Chapter 8 137SafetySafety080803_CDM8975_RAP_REV00.indd 136-137080803_CDM8975_RAP_REV00.indd 136-137 2008.8.25 5:32:6 PM2008.8.25 5:32:6 PM](https://usermanual.wiki/Pantech/RAP.Users-Manual-2/User-Guide-990736-Page-39.png)
