Pantech TX-215 Dual-Mode CDMA Phone (CDMA/ PCS CDMA) User Manual TX 215 050323
Pantech Co., Ltd. Dual-Mode CDMA Phone (CDMA/ PCS CDMA) TX 215 050323
Pantech >
Contents
- 1. User Manual 1
- 2. User Manual 2
- 3. User Manual
- 4. Users Manual
User Manual 2
![SETTINGS SETTINGSCH479CH478CLOCK FORMAT1Press [MENU], then select “Settings & Tools”menu, press “Clock Format” then select “Main Clock”.3To save, press [OK].MAIN CLOCK2Select one of the following with the Navigation Key.DigitalAnalogOfflllTo change the main clock’s appearance on the standby screen:1Press [MENU], then select “Settings & Tools”menu, press “Clock Format” then select “Front Clock”.3To save, press [OK].FRONT CLOCK2Select one of the following with the Navigation Key.DigitalAnalogOfflllTo change the front clock’s appearance on the standby screen:RINGER ID12Press [MENU], then select “Settings & Tools”menu, press “Ringer ID”.Select “On” or “Off” with the Navigation Key,then press [OK] to save it.PICTURE ID12Press [MENU], then select “Settings & Tools”menu, press “Picture ID”.Select “On” or “Off” with the Navigation Key,then press [OK] to save it.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-1.png)
![CH481TOOLSCH480TOOLSUse the keypad to change or enter the end date. END DATEUse the Navigation Key to select a time zone.(EST, EDT, CST, CDT, MST, MDT, PST, PDT,AKST, AKDT, HAST, HADT or GMT/UTC). TIME ZONEUse the keypad to select the alert tone you wishto set.ALERTUse the Navigation Key to select vibrate on/off.VIBRATEUse the Navigation Key to select an alert timeinterval option (0, 5 Minutes, 10 Minutes,15Minutes before the appointment time). REMINDER4Press [SAVE] to save it or [CLR] toreturn to the calendar.5The date of the event will be marked on yourcalendar.1To view the Calendar List.VIEW PLAN LIST2Move the Navigation Key to choose an event thenpress [VIEW]. Press [OPTIONS] and select “SAVE” to save itor select “Erase”, then select “Yes”, press .CALENDARADD NEWSets an event and reminds you of that event.23Move the Navigation Key left, right, up or down tochoose a date in the calendar then press [OK].Press [OPTIONS] to 1. Monthly View, 2. WeeklyView, 3. New, 4. Go To Date, 5. Erase, 6. EraseToday or 7. Erase Passed.Use the keypad to set a start time and toselect “AM” or “PM”. START TIMEUse the keypad to entering a appointment of yourschedule. APPOINTMENTUse the keypad to change or enter the start date. START DATEUse the Navigation Key to select a setting for therepeat repeating the calendar. (Daily, Weekly,Monthly or Yearly). RECURRENCYThe date field is highlighted. Press the NavigationKey down to set the alarm options.Use the keypad to set a end time and toselect “AM” or “PM”. END TIME1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select“Calendar”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-2.png)
![CH483TOOLSCH482TOOLSTo display the time and date in pre-programmed cities:WORLD CLOCK24Select a city with the [CITIES].3The world map appears with the city, its dateand time.• If user press [DST], then all DST supporting cities DST turnon/off.To return to the previous page, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “World Clock”.ALARM CLOCKSelect one of the entries using the Navigation Key.To set a new alarm, choose alarm 1, 2 or 3.To edit an existing alarm, select that alarm. Press [OK].Press [OPTIONS] to 1. Off, 2. Reset, 3. Reset All.21The setting field will be highlighted. Press theNavigation Key down to select alarm options.3Use the Navigation Key to select a setting for thealarm (Once, Daily, Monday through Friday,Weekends). FREQUENCYPress [MENU], then select “Settings & Tools”menu, press “Tools” then select “Alarm Clock”.Use the Navigation Key to select alarm on/off.ALARMUse the keypad to set a time for the alarm andto select “AM” or “PM”. TIMEUse the keypad to select the alert tone you wishto set.RINGERTo save an alarm setting press [SAVE].4](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-3.png)
![CH485TOOLSCH484TOOLS2Follow the instructions below to calculate8*6Ö4-2.5= 9.53To reset, press [CLEAR].To access the calculator:CALCULATORInput 8.Move the Navigation Key rightward.Input 6 then press the Navigation Key.Move it leftward.Input 4 then press the Navigation Key.Move it downward.Input 2 then press the to input (.). Press 5.Then press and you will see the answer.: X, : -, : /, : +, : ., : Clear, : =.1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Calculator”.• To change the displayed number from positive (+) to negative (-)and vice versa, press [ע].• If user press [OPERATOR], to use multi parenthesis support and parenthesis rules [(,)] or power [^].Your phone includes an internal notepad that can be used tocompose and store reminders and notes.NOTEPAD1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Notepad”.ADD MEMO2To add a new memo, press [NEW].Input a new text memo.(Please refer to page 31 for more details on enteringletters, numbers & symbols.)1VIEW MEMO2The list of all memos, in saved order, is displayed.Select a memo then press [VIEW].33.1. The selected memo will appear. To edit it, press [EDIT] and input a new text memo, then press [SAVE] to save it.To compose a memo (there is an 80-letter limit):To view a saved memo:Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Notepad”.3.3. To erase a memos, press [OPTIONS] “Erase”.3.2. To add a new memo, press [NEW].3.4. To erase all memos, press [OPTIONS] “Erase All”.3To save memo, press [SAVE].](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-4.png)
![GET IT NOWYour phone provides a unique feature -Get It Now- that enables youto download ringtones, wallpapers, games and more from yournetwork to your phone. Please contact your service provider for theavailability of these services.GET IT NOWChapter 58786CH587TOOLSCH4213Simultaneously times up to six different events. To operate thestop watch:STOP WATCHTo measure a time period.1. To start the stop watch, press [START].2. To pause it, press [STOP].3. To resume it, press [START].To reset it, press [RESET]. To time up to six events at once:1. To start, press [START].2. To stop a time period and continue measuring another one, press [CONT].3. To stop the second and continue measuring a third one, press [CONT].4. To measure up to six time periods, repeat theabove steps.5. To stop the stop watch, press [STOP].6. To review the results, press [VIEW].7. To return to the stop watch, press [OK].8. To reset it, press [RESET].Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Stop Watch”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-5.png)
![CH589GET IT NOWCH588GET IT NOWGET TUNES & TONESDOWNLOADING NEW TUNES & TONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes &Tones” then select “Get New” the select“New Provider”, press . (The BREW willlaunch and take you to the download menu.)3Use your navigation key to select a “Tunes orTones” you wish to download, press [OK].2Use your navigation key to select a provider’sbrowser, press [OK]. USING DOWNLOADED TUNES & TONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes & Tones”.2To play downloaded tunes or tones.Select the tunes or tones you want to play, thenpress [PLAY].3To erase downloaded tunes or tones.Select the tunes or tones you want to erase, thenpress [EARSE], then select “Yes”, press .4To assign downloaded tunes or tones.Select the tunes or tones you want to assign, then press [OPTIONS].Select “Set As Ringtone” or “Set As Ringer ID”,then select “Yes”, press .By pressing [OPTIONS], you can choose from the following:1. Set As Ringtone2. Set As Ringer ID3. Rename (This function applies only to downloaded contents.)TO RECORDING NEW TONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes &Tones” then select “Record New”.3To stop recording a memo, press [STOP].2To record a voice memo, press [OK]Instructions will be displayed and you will hear“Beep Sound”. l](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-6.png)
![CH591GET IT NOWCH590GET IT NOWGET FUN & GAMESDOWNLOADING NEW FUN & GAMES1Press [MENU], then select “Get It now” menuor press , then press “Get Fun & Games”then select “Get New”. (The BREW willlaunch and take you to the download menu.)3Use your navigation key to select a “Fun orGames” you wish to download, press [OK].2Use your navigation key to select a provider’sbrowser, press [OK]. GET PIX & FLIXTO TAKE PIX1Press [MENU], then select “Get It now” menu,then press “Get Pix & Flix” or press orpress and hold side camera key, then select“Take Pix”. Or press or .3Press side camera key or press and hold totake the picture.2Point the camera lens at your subject. You cancheck the picture framing through the maindisplay screen.PLAYING DOWNLOADED FUN & GAMES1Press [MENU], then select “Get It now” menuor press , then press “Get Fun & Games”.2To play downloaded fun or games.Select the fun or games you want to play, thenpress [PLAY].3To launch “BREW”.Press [GALLERY], you can view the captured pictures.By pressing [OPTIONS], you can choose from the following:1. Resolution: To select a resolution for a picture.(640x480/320x240/160x120)2. Self Timer: To activate the camera’s timer function.(Off/5 Seconds/10 Seconds)3. Flash: To activate the flash function. (Off/On this shot/Always On/Auto Flash)4. White Balance: To select white balance. (Auto/Sunny/ Cloudy/Tungsten/Fluorescent/Darkness)5. Quality: To select a picture quality. (High/Normal/Economy)6. Shutter Sound: To select a shutter sound.(Off/Camera Shutter Sound/Say “Cheese”/ Ready 123)7. Color Effect: To select a color effects. (Normal/Antique/Black & White/Negative)8. Display Icon: To select a icon “On” or “Off”.9. Sub LCD: To taking picture with Sub LCD.By pressing [OPTIONS], you can choose Sub LCD options: 1. Main LCD/2. Flash/3. Self Timer/4. Shutter Sound10. Fun Frame: Select your favorite fun picture frame todecorate your picture.User can control brightness and zoom directly by pressing up and down navigation key or side volume key.Navigation Up / Down: Zoom up.Navigation Left / Right: Brightness up ( -2, -1, 0, +1, +2).](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-7.png)
![CH593GET IT NOWCH592GET IT NOW4After take the taken picture be displayed.To save the picture, press [SAVE].To go back to idle mode without saving thepicture, press . To take another picture without saving the pictureyou just took, press [REJECT].To send the picture to someone, press [SEND].Please refer to page 100 for more details on“New Pix MSG”.GALLERY3Select picture with the Navigation Key, thenpress [VIEW]. You can see detail picture.2In Review Mode, you can view all the picturesyou have stored in your phone.In detail view, user can view previous or next picture by pressing left or right navigation key.By pressing [OPTIONS], you can choose from the following:1. Send: To send a picture message.2. To Pix Place: To uploading selected picture to pix server.3. Set As: Assigns the selected pix to display for specific tasks. (Wallpaper/Screen Saver/Picture ID/Power On/Power Off.).4. Rename: To edit the picture’s title. 5. Lock/Unlock: To select “Lock” or “Unlock”. 6. Erase: Erase the current picture from your phone.7. Erase All: To erase all the pictures in your phone. 8. Pix Info: Displays information on the selected picture, such as name, date, time, resolution and file size.(“Send”, “To Pix Place”, “Set As”, “Rename”, Lock/Unlock”,Erase” functions applies only to downloaded contents.)Press [CAMERA] to return to Camera mode to take another picture.In Review Mode you can view all the pictures you have taken, storeselected images in your phone, send pictures to the Online Album,delete images and access additional picture options.1Press [MENU], then select “Get It now” menu,then press “Get Pix & Flix” or press orpress and hold side camera key, then select“Gallery”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-8.png)
![CH595GET IT NOWCH594GET IT NOWGET NEWS & INFOCONNECTING NEWS & INFO1Press [MENU], then select “Get It now” menuor press , then press “Get News & Info”then select “Connect Web”.2Connect “WAP Browser”.PIX PLACE2Connect “WAP Browser”.PIX SERVICES2To launch “BREW”.1Press [MENU], then select “Get It now” menu,then press “Get Pix & Flix” or press orpress and hold side camera key, then select“Pix Place”.1Press [MENU], then select “Get It now” menu,then press “Get Pix & Flix” or press orpress and hold side camera key, then select“Pix Services”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-9.png)
![VOICE MAIL, TXT, PIXMESSAGINGThis chapter addresses Voice Mail, TXT, Pix Messaging functionsincluding: WHEN A NEW MESSAGE ARRIVESVOICE MAILNEW TXT MSGNEW PIX MSGINBOXSENTDRAFTSE- MAILMOBILE IMCHATERASE ALLSETTINGSChapter 69796CH697GET IT NOWCH5GET GOINGCONNECTING GET GOING1Press [MENU], then select “Get It now” menuor press , then press “Get Going” thenselect “Get New”.2To launch “BREW”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-10.png)
![Displays the number of voice mails and accesses them by pressing .VOICE MAILCH699CH698WHEN A NEW MESSAGE ARRIVES NEW TXT MSG1The following display appearswhen a new message arrives.2To display the message, select “View Now”,then press [OK].1Press [MENU], then select “Messaging”menu, press “New TXT Msg” or press[MESSAGE], press “New TXT Msg”.To send a new txt message:2Under “To”, input the phone number and press .3Under “Message”, input a new TXT message.By pressing [ADD], you can choose from the following:1. Contacts : Search the phone number which is stored in the contacts list.2. Recent Calls : Search the phone number which is stored in the recent calls list.By pressing [OPTIONS], then select “ADD”. You can choose from the following:1. Graphics : Inserts simple graphic image in TXT Msg.2. Sounds : Inserts EMS sound in TXT Msg.3. Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols.)FIRST TIME USER1Dial *86 then press [SEND].2At the recording, press .3To set up your account follow the voice tutorial.EXISTING USER1Dial *86 then press [SEND].2At the recording, enter your 4 digit password,then press .3To listen to new messages, press .• To field support max 10 contacts.If one of field is inserted in txt msg field, message save atdraft box.5To send the TXT message, press [SEND].4Press [OPTIONS], then select “Priority Level”,select “High” or “Normal”, then press [OK].Press [OPTIONS], then select “Call Back #”,select “On” or “Off”, then press [OK].To save the TXT message, press [OPTIONS], then select “Save as Drafts”.1Press [MENU], then select “Messaging”menu, press “Voice Mail” or press[MESSAGES], press “Voice Mail”.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-11.png)
![NEW PIX MSG NEW PIX MSGCH6101CH61001Press [MENU], then select “Messaging”menu, press “New Pix Msg” or press[MESSAGE], press “New Pix Msg”.To send a new pix message:2Under “To”, input the phone number and press .3Under “Text”, input a new TXT message thenpress .By pressing [ADD], you can choose from the following:1. Contacts : Search the phone number which is stored in the contacts list.2. Recent Calls : Search the phone number which is stored in the recent calls list.3. To Pix Place : To send pictures by using online Address.By pressing [OPTIONS].Add Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols. Max 1000 characters support.)6Under “Subject”, input a subject then press .By pressing [OPTIONS].Add Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols. Max 100 characters support.)4Under “Picture”, user can insert only one pictureand be able to remove inserted picture. Press [GALLERY], then select the picture you’d like to send and press .• To field support max 10 contacts.8To send the Pix message, press [SEND].7Press [OPTIONS], then select “Priority Level”,select “High” or “Normal”, then press [OK].To save the Pix message, press [OPTIONS], then select “Save As Drafts”.To preview a written picture message, press[OPTIONS], then select “Preview”.To remove picture, press [OPTIONS], then select “Remove Picture”.To remove sound, press [OPTIONS], then select “Remove Sound”.To add slide, press [OPTIONS], then select “Add Slide”.5Under “Sound”, user can insert only on soundand be able to remove inserted sound. Press [SOUNDS], then select the sound you’d like to send and press .](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-12.png)
![INBOX INBOXCH6103CH6102SAVE PICTURE1To save a picture to the “Save Picture” folder.FORWARD1To forward the TXT or PIX message.2Input the phone number of the person you aresending the message, then press [OK].3Input any text message to go along with theforwarded message, then press [OK].: Read: Unread: Message with multimedia attachment: Duplicated: WAP Push read: WAP Push unreadThe Inbox manages received TXT/PIX/Web Alert messages. To access:2Select a message, then press [OPEN]. The message is displayed. To delete a message,press [ERASE], press [OK].If you select web alert message, press [GET],to Browser launching.Press [OPTIONS].3REPLY WITH COPY123To reply to a received message and include thereceived message into the message.The default call back number is automaticallyincluded into the Default CB# field. You can scroll to the number and edit it.To send the TXT or PIX message, press [OK].SAVE SOUND1To save a sound to the “Save Sound” folder.1Press [MENU], then select “Messaging”menu, press “Inbox” or press[MESSAGE], press “Inbox”.SAVE QUICK TEXT1Select to save received text msg to “Quick Text”.ADD TO CONTACTS1Select to save number to contacts.“Play Again", “Save Phicture", “Save Sound" menu appears onlywhen you receive a pix message or EMS message.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-13.png)
![INBOX SENTCH6105CH6104LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .MESSAGE INFO1To show received pix message information.• “Message Info” menu appears only when you receive a pix message.• Place a call to a received message number by simply pressing .1Press [MENU], then select “Messaging”menu, press “Sent” or press [MESSAGE],press “Sent”.Manages sent TXT/PIX messages or messages waiting to be sent.2Select a message then press [OPEN]. The message is displayed. To delete a message,press [ERASE], press [OK].Press [OPTIONS].3FORWARD1To forward the TXT or PIX message.2Input the phone number of the person you aresending the message, then press [OK].3Input any text message to go along with theforwarded message, then press [OK].: Sent: Unsent: Incomplete delivery: Sent but delivery failed: Read: Cancel: Multi destination: Auto resend: Draft: Interrupted by call](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-14.png)
![SENT DRAFTSCH6107CH6106SAVE QUICK TEXT1Select to save received text msg to “Quick Text”.ADD TO CONTACTS1Select to save number to contacts.ERASE1To erase this message, select “Erase”.LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .2Select “Yes” or “No”, then press .SAVE QUICK TEXT1Select to save received text msg to “Quick Text”.ADD TO CONTACTS1Select to save number to contacts.SEND1To send a selected message.LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .MESSAGE INFO1To show received pix message information.• “Message Info” menu appears only when you receive a pix message.• Place a call to a received message number by simply pressing .1Press [MENU], then select “Messaging”menu, press “Drafts” or press[MESSAGE], press “Drafts”.2Select a message then press [EDIT]. The message is displayed. To delete a message,press [ERASE], press [OK].Press [OPTIONS].3Draft Folder contains any draft messages or saved mes-sages.If message composition is interrupted by a voice call or otherinterrupting event, the text of the current composition is automaticallysaved in the drafts folder.RESEND1To resend a TXT or PIX message.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-15.png)
![CH6109CH6108MOBILE IME- MAIL1Press [MENU], then select “Messaging”menu, press “E-mail” or press[MESSAGE], press “E-mail”.2Browser launching.1Press [MENU], then select “Messaging”menu, press “Mobile IM” or press[MESSAGE], press “Mobile IM”.2Browser launching.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-16.png)
![CH6111CH6110ERASE ALLCHAT22.1. To erase all the inbox messages, press [ERASE INBOX].3Select “Yes”, then press .2.2. To erase all the drafts messages, press [ERASE DRAFTS].2.3. To erase the sent messages, press [ERASE SENT].2.4. To erase the all message, press [ERASE ALL].1Press [MENU], then select “Messaging”menu, press “Chats” or press[MESSAGE], press “Chat”.1Press [MENU], then select “Messaging”menu, press [OPTIONS] or press[MESSAGE], press [OPTIONS].2Browser launching.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-17.png)
![CH6113CH6112SETTINGSSETTINGSAUTO SAVEPress [AUTO SAVE]. Select “On”, “Off” or “Prompt” with theNavigation Key.Press [OK].Manages messaging features through various features.23AUTO ERASEAutomatically erases inbox messages when new messages arrive.1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].Press [AUTO ERASE]. Select “On” or “Off” with the Navigation Key.Press [OK].231Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].AUTO VIEW TXTPress [AUTO VIEW TXT]. Select “On” or “Off” with the Navigation Key.Press [OK].23AUTO RECEIVE1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].Press [AUTO RECEIVE]. Select “On” or “Off” with the Navigation Key.Press [OK].231Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].If the “Auto View Txt” is set to on, the user will be able to view themessage. If the “Auto View Txt” is set to off, the user can view themessage by entering SMS Menu-> Inbox.On : All sent messages saved in the Sent box.Off : All sent messages not saved in the Sent boxPrompt : “Yes”, “No” dialogue box displayed after sent message.On : Oldest message erased frm inbox automatically when message is full.Off : Oldest message not erased frm inbox automatically when message is full.On : Text message be displayed automatically.Off : User able to tetrieve the message from the inbox or based on user input from interactive notification.On : Pix msg downloaded autoamatically.Off : User able to retrieve the message from the inbox or based on user input from interactive notification.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-18.png)
![CH6115CH6114SETTINGSSETTINGSCreate a signature that can be automatically inserted at the end of amessage.SIGNATURE2Press [SIGNATURE].To activate Signature function, put the cursoron Insert Signature then select “Custom” byusing right or left direction keys. To deactivateSignature function, select “None”.3To input “Signature”, put the cursor on EditSignature.4Press [OK].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].VOICE MAIL#2Press [VOICE MAIL#].Input a new voice call back number or editvoice call back number.3Press [OK].CALLBACK#Edits a default callback number so that the recipient can callback orreply.Press [CALLBACK#]. Select “On” or “Off” with the Navigation Key.Select “On”, then input a callback number, press [OK].231Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].3Press [OK].BLOCK/UNBLOCK2Press [BLOCK/UNBLOCK].Select “Block”, “Unblock” or “View List ofBlocked Addresses” with the Navigation Key.BLOCK : Enter the address to block.UNBLOCK : Enter the address to remove from block.VIEW LIST OF BLOCKED ADDRESSES : Display the blockedlist on LCD.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-19.png)
![CH6117CH6116SETTINGSSETTINGSFONT SIZE2Press [FONT SIZE].Select “Small”, “Large” or “Normal” with theNavigation Key.3Press [OK].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGES], press [SETTINGS].ENTRY MODE2Press [ENTRY MODE].Select “T9Word”, “Abc”, “ABC” or “123” withthe Navigation Key.3Press [OK].Sets an Entry Mode as a default. For example, if T9 Mode is thedefault, its icon will appear.To edit the Quick Text message you have saved:QUICK TEXT2Press [QUICK TEXT].2.1. Select a message from the list. Press [OK].2.2. To add a new Quick Text message, press [OPTIONS] to select “Add New”. To edit the Quick Text message you have selected, press [OPTIONS] to select “Edit”, then enter text, press [SAVE].3To erase the saved Quick Text message, press [ERASE].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].1Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS].Pre-defined quick text as below.1. What’s up?/2. Let’s meet/3. Check this out!/4. Whachadoing?/5. Thanks/6. What do you think?/7. You’ve gotta be hereto enjoy this/8. Would you like to join me for a date tonight?/9. On my way/10. Yes/11. You’re the best!/12. Call me](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-20.png)
![MEMOMOBILE WEB 2.0This chapter addresses Internet services and web browsing. For more detailed information contact your service provider.STARTING INTERNET BROWSERBROWSER MENUChapter 7119CH6CH7118](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-21.png)
![BROWSER MENUSTARTING INTERNET BROWSER BROWSER MENUCH7121CH7120BACK1To return to the previous page.Press , then press [MENU] . LAUNCHING MOBILE WEB 2.01To start your Internet browser and accesswebsites through your wireless handset press . VZW HOME1To display the homepage. Press , then press [MENU] . ADDRESS1To select “Address”.Press , then press [MENU] .REFRESH1To select “Refresh”.Press , then press [MENU] . The browser menu lists the actions necessary to operate the browser.press , then press [MENU].When the home item is selected from the browser menu, the phonedisplays the home page.Now you can access news, sports, weather, and e-mail from yourphone. Mobile Web 2.0 keeps you updated by providing access to up-to-date information such as news, sports, weather and stockquotes when you subscribe to Internet service with your serviceprovider. Please contact your service provider for a list of availablewebsites and service details.Selecting the “Address” action displays the URL of thecurrent page.Selecting the refresh item from the browser menu refreshes the currentpage.HISTORY1To select “History”.Press , then press [MENU] . FORWARD1To forward to the next page.Press , then press [MENU] . CLEAR MEMORY1To clear browser memory.Press , then press [MENU] .](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-22.png)
![BROWSER MENUSAFETY ANDWARRANTYThis chapter addresses the safety guidelines and precautions tofollow when operating your phone. Before operating your phone,please be aware of all the safety details.This chapter contains the terms and conditions of services and thewarranty for your phone. Please review them thoroughly. SAFETY INFORMATION FOR WIRELESS HANDHELD PHONESSAFETY INFORMATION FOR FCC RF EXPOSURESAR INFORMATIONFDA CONSUMER UPDATEPROTECT YOUR WARRANTY12 MONTH LIMITED WARRANTYChapter 8123CH7CH8122ADVANCED1To select “Advanced”.Press , then press [MENU] .Selecting the advanced item in the browser menu displays theadvanced menu items.To exit browser.Press , then press [MENU] . EXIT1SETTINGS1To select “Settings”.Press , then press [MENU] . DownloadsRestart BrowserScroll ModeSend ReferrerKey Press TimeoutConnection TimeoutAbout...Encryption: 1. Authentication2. Root Certificate3. Current Certificate](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-23.png)
![SAFETY INFORMATION FOR WIRELESSHANDHELD PHONES SAFETY INFORMATION FOR WIRELESSHANDHELD PHONES125CH8CH8124Your wireless handheld portable telephone is a low power radiotransmitter and receiver. When it is ON, it receives and also sends outradio frequency (RF) signals.In August 1996, the Federal Communications Commissions (FCC)adopted RF exposure guidelines with safety levels for handheld wirelessphones. Those guidelines are consistent with the safety standardspreviously set by both U.S. and international standards bodies:ANSI C95.1 (1992) *NCRP Report 86 (1986) *ICNIRP (1996) *Those standards were based on comprehensive and periodic evaluationsof the relevant scientific literature. For example, over 120 scientists,engineers, and physicians from universities, government health agencies,and industry reviewed the available body of research to develop the ANSIStandard (C951).The design of your phone complies with the FCC guidelines (and thosestandards).EXPOSURE TO RADIO FREQUENCY SIGNALSUse only the supplied or an approved replacement antenna. Unauthorizedantennas, modifications, or attachments could damage the phone andmay violate FCC regulations.ANTENNA CARERead This Information Before Using Your HandheldPortable Cellular TelephoneTalking on the phone while driving is extremely dangerous and is illegal insome states. Remember, safety comes first. Check the laws and regulationson the use of phones in the areas where you drive. Always obey them.Also, if using your phone while driving, please:lGive full attention to driving. Driving safely is your first responsibility.lUse hands-free operation, if available.lPull off the road and park before making or answering a call, if drivingconditions so require.If you must use the phone while driving, please use one-touch, speed dialing,and auto answer modes.An airbag inflates with great force. DO NOT place objects, including bothinstalled or portable wireless equipment, in the area over the airbag or in theair bag deployment area. If in-vehicle wireless equipment is improperlyinstalled and the air bag inflates, serious injury could result.DRIVING SAFETYWARNING: Failure to follow these instructions may lead to seriouspersonal injury and possible property damage.1* : American National Standards Institute.2* : National Council on Radiation protection and measurements. 3* : International Commission on Nonionizing Radiation Protection.](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-24.png)
![SAFETY INFORMATION FOR WIRELESSHANDHELD PHONESSAFETY INFORMATION FOR WIRELESSHANDHELD PHONES127126The Health Industry Manufacturers Association recommends that aminimum separation of six (6”) inches be maintained between a handheldwireless phone and a pacemaker to avoid potential interference with thepacemaker. These recommendations are consistent with the independentresearch by and recommendations of Wireless Technology Research.Persons with pacemakers : lALWAYS keep the phone more than six inches from yourpacemaker when the phone is turned on.lDo not carry the phone in a breast pocket.lUse the ear opposite the pacemaker to minimize the potential forinterference.lIf you have any reason to suspect that interference is taking place,turn your phone OFF immediately.PACEMAKERSIf you use any other personal medical device, consult the manufacturer ofyour device to determine if they are adequately shielded from external RFenergy. Your physician may be able to assist you in obtaining thisinformation.Turn your phone OFF in healthcare facilities when any regulations postedin these areas instruct you to do so. Hospitals or healthcare facilities maybe using equipment that could be sensitive to external RF energy.OTHER MEDICAL DEVICESTurn your phone OFF where posted notices so require.POSTED FACILITIESELECTRONIC DEVICESMost modern electronic equipment is shielded from RF energy. However,certain electronic equipment may not be shielded against the RF signalsfrom your wireless phone.OTHER SAFETY GUIDELINESFCC and Transport Canada Regulations prohibit using your phone whilein the air. Turn your phone OFF before boarding an aircraft.AIRCRAFTTo avoid interfering with blasting operations, turn your phone OFF when ina “blasting area” or in areas posted: “Turn off two-way radio.” Obey allsigns and instructions.BLASTING AREASTurn your phone OFF when in any area with a potentially explosiveatmosphere and obey all signs and instructions. Sparks in such areascould cause an explosion or fire resulting in bodily injury or evendeath.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gasstations; below deck on boats; fuel or chemical transfer or storagefacilities; vehicles using liquefied petroleum gas (such as propane orbutane); areas where the air contains chemicals or particles, such asgrain, dust, or metal powders; and any other area where you wouldnormally be advised to turn off your vehicle’s engine. POTENTIALLY EXPLOSIVE ATMOSPHERESCH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-25.png)
![SAFETY INFORMATION FOR WIRELESSHANDHELD PHONESSAFETY INFORMATION FOR FCC RF EXPOSURE129128PRECAUTIONSYour Handheld Portable Telephone is a high quality piece ofequipment. Before operating, read all instructions and cautionarymarkings on (1) AC Adaptor (2) Battery and (3) Product Using Battery.DO NOT use this equipment in an extreme environment wherehigh temperature or high humidity exists.DO NOT abuse the equipment. Avoid striking, shaking orshocking. When not using, lay down the unit to avoid possibledamage due to instability.DO NOT expose this equipment to rain or spilled beverages.DO NOT use unauthorized accessories.DO NOT disassemble the phone or its accessories. If serviceor repair is required, return unit to an authorized Audiovoxcellular service center. If unit is disassembled, the risk ofelectric shock or fire may result.DO NOT short-circuit the battery terminals with metal items etc.In August 1996 the Federal Communications Commission (FCC) ofthe United States with its action in Report and Order FCC 96-326adopted an updated safety standard for human exposure to radiofrequency electromagnetic energy emitted by FCC regulatedtransmitters. Those guidelines are consistent with the safety standardpreviously set by both U.S. and international standards bodies. Thedesign of this phone complies with the FCC guidelines and theseinternational standards.Use only the supplied or an approved antenna. Unauthorizedantennas, modifications, or attachments could impair call quality,damage the phone, or result in violation of FCC regulations.Do not use the phone with a damaged antenna. If a damagedantenna comes into contact with the skin, a minor burn may result.Please contact your local dealer for replacement antenna.This device was tested for typical body-worn operations with theback of the phone kept 2.0 cm. from the body with a belt clip that contains metallic components. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or s-imilar accessories with which this device was tested. The useof accessories that do not satisfy these requirements may not c-omply with FCC RF exposure requirements, and should be avoided.BODY-WORN OPERATIONWARNING! Read this Information before usingCAUTIONSFor more information about RF exposure, please visit the FCCwebsite at www.fcc.gov.CH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-26.png)
![SAR INFORMATION SAR INFORMATION131130THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designedand manufactured not to exceed the emission limits for exposure toradiofrequency (RF) energy set by the Federal CommunicationsCommission of the U.S. Government. These limits are part ofcomprehensive guidelines and establish permitted levels of RF energyfor the general population. The guidelines are based on standards thatwere developed by independent scientific organizations throughperiodic and thorough evaluation of scientific studies. The standardsinclude a substantial safety margin designed to assure the safety of allpersons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit ofmeasurement known as the Specific Absorption Rate, or SAR. The SARlimit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with thephone transmitting at its highest certified power level in all testedfrequency bands. Although the SAR is determined at the highestcertified power level, the actual SAR level of the phone while operatingcan be well below the maximum value. This is because the phone isdesigned to operate at multiple power levels so as to use only thepower required to reach the network. In general, the closer you are to awireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must betested and certified to the FCC that it does not exceed the limitestablished by the government adopted requirement for safe exposure.The tests are performed in positions and locations (e.g., at the ear andworn on the body) as required by the FCC for each model. The highestSAR value for this model phone when tested for use at the ear is 1.25W/Kg and when worn on the body, as described in this user guide, is0.527W/Kg. (Body-worn measurements differ among phone models,depending upon available accessories and FCC requirements). Whilethere may be differences between the SAR levels of various phonesand at various positions, they all meet the government requirement forsafe exposure. The FCC has granted an Equipment Authorization for this model phonewith all reported SAR levels evaluated as in compliance with the FCCRF exposure guidelines. SAR information on this model phone is on filewith the FCC and can be found under the Display Grant section ofhttp://www.fcc.gov/ oet/fccid after searching on PP4TX-215.Additional information on Specific Absorption Rates (SAR) can be foundon the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com.* In the United States and Canada, the SAR limit for mobile phonesused by the public is 1.6 watts/kg (W/kg) averaged over one gram oftissue. The standard incorporates a sub-stantial margin of safety to giveadditional protection for the public and to account for any variations inmeasurements.CH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-27.png)
![133132FDA CONSUMER UPDATE FDA CONSUMER UPDATE1. Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems areassociated with using wireless phones. There is no proof, however, that wirelessphones are absolutely safe. Wireless phones emit low levels of radiofrequencyenergy (RF) in the microwave range while being used. They also emit very lowlevels of RF when in the stand-by mode. Whereas high levels of RF can producehealth effects (by heating tissue), exposure to low level RF that does not produceheating ef-fects causes no known adverse health effects. Many studies of low levelRF exposures have not found any biological ef-fects. Some studies havesuggested that some biological ef-fects may occur, but such findings have notbeen confirmed by additional research. In some cases, other researchers have haddifficulty in reproducing those studies, or in determining the reasons forinconsistent results.2. What is FDA’s role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumerproducts such as wireless phones before they can be sold, as it does with newdrugs or medical de-vices. However, the agency has authority to take action ifwire-less phones are shown to emit radiofrequency energy (RF) at a level that ishazardous to the user. In such a case, FDA could require the manufacturers ofwireless phones to notify users of the health hazard and to repair, replace or recallthe phones so that the hazard no longer exists. Although the existing scientific datado not justify FDA regula-tory actions, FDA has urged the wireless phone industryto take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF ex-posure to the user that is not necessary for device function;and• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that haveresponsibility for different aspects of RF safety to ensure coordinated efforts at thefederal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some inter-agency working groupactivities, as well. FDA shares regulatory responsibilities for wireless phones withthe Federal Communications Commission (FCC). All phones that are sold in theUnited States must comply with FCC safety guidelines that limit RF exposure. FCCrelies on FDA and other health agencies for safety questions about wirelessphones. FCC also regulates the base stations that the wireless phone networksrely upon. While these base stations operate at higher power than do the wirelessphones themselves, the RF expo-sures that people get from these base stationsare typically thousands of times lower than those they can get from wire-lessphones. Base stations are thus not the subject of the safety questions discussed inthis document.3. What kinds of phones are the subject of this update?The term “wireless phone” refers here to hand-held wireless phones with built-inantennas, often called “cell,” “mobile,” or “PCS” phones.U.S. Food and Drug Administration -Center for Devices andRadiological Health Consumer Update on Wireless PhonesThese types of wireless phones can expose the user to measurable radiofrequencyenergy (RF) because of the short distance between the phone and the user’s head.These RF exposures are limited by Federal Communications Commission safetyguidelines that were developed with the advice of FDA and other federal health andsafety agencies. When the phone is located at greater distances from the user, theexposure to RF is drastically lower because a person’s RF exposure decreasesrapidly with increasing distance from the source. The so-called “cordless phones,”which have a base unit connected to the telephone wiring in a house, typicallyoperate at far lower power levels, and thus produce RF expo-sures far below theFCC safety limits. 4. What are the results of the research done already?The research done thus far has produced conflicting results, and many studieshave suffered from flaws in their research methods. Animal experimentsinvestigating the effects of radiofrequency energy (RF) exposures characteristic ofwire-less phones have yielded conflicting results that often cannot be repeated inother laboratories. A few animal studies, how-ever, have suggested that low levelsof RF could accelerate the development of cancer in laboratory animals. However,many of the studies that showed increased tumor develop-ment used animals thathad been genetically engineered or treated with cancer-causing chemicals so as tobe pre-dis-posed to develop cancer in the absence of RF exposure. Other studiesexposed the animals to RF for up to 22 hours per day. These conditions are notsimilar to the conditions under which people use wireless phones, so we don’tknow with certainty what the results of such studies mean for human health. Threelarge epidemiology studies have been published since December 2000. Betweenthem, the studies investigated any possible association between the use ofwireless phones and primary brain cancer, glioma, meningioma, or acoustic neu-roma, tumors of the brain or salivary gland, leukemia, or other cancers. None of thestudies demonstrated the existence of any harmful health effects from wirelessphone RF exposures. However, none of the studies can answer questions aboutlong-term exposures, since the average period of phone use in these studies wasaround three years.5. What research is needed to decide whether RF expo-sure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological stud-ies of peopleactually using wireless phones would provide some of the data that are needed.Lifetime animal exposure studies could be completed in a few years. However,very large numbers of animals would be needed to provide reliable proof of acancer promoting effect if one exists. Epidemiological stud-ies can provide datathat is directly applicable to human popu-lations, but 10 or more years’ follow-upmay be needed to pro-vide answers about some health effects, such as cancer.This is because the interval between the time of exposure to a can-cer- causingagent and the time tumors develop - if they do -may be many, many years. Theinterpretation of epidemiologi-cal studies is hampered by difficulties in measuringactual RF exposure during day-to-day use of wireless phones. Many fac-tors affectthis measurement, such as the angle at which the phone is held, or which model ofphone is used.6. What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups ofinvestigators around the world to ensure that high priority animal studies areconducted to address impor-tant questions about the effects of exposure toradiofrequency energy (RF). FDA has been a leading participant in the World HealthOrga-nization International Electromagnetic Fields (EMF) Project since its inceptionin 1996. An influential result of this work has been the development of a detailedagenda of research needs that has driven the establishment of new research pro-grams around the world.CH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-28.png)
![135134FDA CONSUMER UPDATE FDA CONSUMER UPDATEAgain, the scientific data do not demonstrate that wireless phones are harmful. Butif you are concerned about the RF exposure from these products, you can usemeasures like those described above to reduce your RF exposure from wire-lessphone use.10.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones,including children and teenagers. If you want to take steps to lower exposure toradiofrequency energy (RF), the measures described above would apply to childrenand teenagers using wireless phones. Reducing the time of wire-less phone useand increasing the distance between the user and the RF source will reduce RFexposure. Some groups sponsored by other national governments have advisedthat children be discouraged from using wireless phones at all. For example, thegovernment in the United King-dom distributed leaflets containing such arecommendation in December 2000. They noted that no evidence exists that us-ing a wireless phone causes brain tumors or other ill effects. Theirrecommendation to limit wireless phone use by children was strictly precautionary;it was not based on scientific evi-dence that any health hazard exists.11.What about wireless phone interference with medical equipment?Radiofrequency energy (RF) from wireless phones can inter-act with someelectronic devices. For this reason, FDA helped develop a detailed test method tomeasure electromagnetic interference (EMI) of implanted cardiac pacemakers anddefibrillators from wireless telephones. This test method is now part of a standardsponsored by the Association for the Ad-vancement of Medical instrumentation(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, andmany other groups, was completed in late 2000. This standard will allowmanufacturers to ensure that cardiac pacemakers and defibrillators are safe fromwireless phone EMI. FDA has tested hearing aids for interference from handheldwireless phones and helped develop a voluntary standard sponsored by theInstitute of Electrical and Electronic Engi-neers (IEEE). This standard specifies testmethods and per-formance requirements for hearing aids and wireless phones sothat that no interference occurs when a person uses a “com-patible” phone and a“compatible” hearing aid at the same time. This standard was approved by theIEEE in 2000. FDA continues to monitor the use of wireless phones for pos-sibleinteractions with other medical devices. Should harmful interference be found tooccur, FDA will conduct testing to assess the interference and work to resolve theproblem.12.Where can I find additional information?For additional information, please refer to the following re-sources:• FDA web page on wireless phones (http://www.fda.gov/cdrh/ phones/index.html)• Federal Communications Commission (FCC) RF Safety Pro-gram (http://www.fcc.gov/oet/rfsafety)• International Commission on Non-Ionizing Radiation Protec-tion (http://www.icnirp.de)• World Health Organization (WHO) International EMF Project(http://www.who.int/emf)• National Radiological Protection Board (UK) (http://www.nrpb.org.uk/)The Project has also helped develop a series of public information documents onEMF issues. FDA and the Cellular Telecommunications & Internet Asso-ciation(CTIA) have a formal Cooperative Research and De-velopment Agreement(CRADA) to do research on wireless phone safety. FDA provides the scientificoversight, obtaining input from experts in government, industry, and academic or-ganizations. CTIA-funded research is conducted through con-tracts toindependent investigators. The initial research will include both laboratory studiesand studies of wireless phone users. The CRADA will also include a broadassessment of additional research needs in the context of the latest researchdevelopments around the world.7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?All phones sold in the United States must comply with Federal CommunicationsCommission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCCestablished these guidelines in consultation with FDA and the other federal healthand safety agencies. The FCC limit for RF exposure from wire-less telephones isset at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). TheFCC limit is consistent with the safety standards developed by the Institute ofElectri-cal and Electronic Engineering (IEEE) and the National Council on RadiationProtection and Measurement. The exposure limit takes into consideration thebody’s ability to remove heat from the tissues that absorb energy from the wirelessphone and is set well below levels known to have effects. Manufacturers ofwireless phones must report the RF expo-sure level for each model of phone to theFCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions forlocating the FCC identification number on your phone so you can find yourphone’s RF exposure level in the online listing.8. What has FDA done to measure the radiofrequency en-ergy coming from wireless phones ?The Institute of Electrical and Electronic Engineers (IEEE) is developing a technicalstandard for measuring the radiofrequency energy (RF) exposure from wirelessphones and other wireless handsets with the participation and leader-ship of FDAscientists and engineers. The standard, “Recom-mended Practice for Determiningthe Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due toWireless Communications Devices: Experimental Techniques,” sets forth the firstconsistent test methodology for measuring the rate at which RF is deposited in theheads of wireless phone users. The test method uses a tissue-simulating model ofthe human head. Standardized SAR test methodology is expected to greatlyimprove the consistency of measurements made at different laboratories on thesame phone. SAR is the mea-surement of the amount of energy absorbed intissue, either by the whole body or a small part of the body. It is measured inwatts/kg (or milliwatts/g) of matter. This measurement is used to determinewhether a wireless phone complies with safety guidelines.9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products—and at this point we do not know that thereis—it is probably very small. But if you are concerned about avoiding evenpotential risks, you can take a few simple steps to minimize your exposure toradiofrequency energy (RF). Since time is a key factor in how much exposure aperson receives, reducing the amount of time spent using a wireless phone willreduce RF exposure.• If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote an-tenna.CH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-29.png)
![PROTECT YOUR WARRANTY 12 MONTH LIMITED WARRANTY137136Read your Warranty carefully, with the special consideration toparagraph seven of the Limited Warranty for your unit.“Warranty does not apply to... or to any product or part thereof which has suffered through alteration... mishandling misuse, neglect or accident”.Many companies are making look alike accessories and in some cases,promoting that their product is equal to or better than the Audiovoxproduct. Be careful. Some of these products may not be compatible touse with your Audiovox product and may damage the unit or cause it tomalfunction. If service is required on your unit and it is determined thata non-Audiovox accessory has created the problem with your unit, theWarranty will not apply. In addition, if the unit has already sufferedirreversible damage by reason of a non-compatible accessory, theWarranty will be voided. To protect your Warranty, use only compatibleaccessories which cannot damage or interfere with the functioning ofyour Audiovox product. UTSTARCOM/AUDIOVOX COMMUNICATIONS555 Wireless Blvd., Hauppauge, New York 11788, 800-229-123516808 Marquardt Avenue, Cerritos, California 90703, 562-802-5100UTStarcom Canada Company5155 Spectrum Way, Unit #5, Mississauga, OntarioCanada L4W 5A1, 800-465-9672UTStarcom/Audiovox Communications (the Company) warrants to theoriginal retail purchaser of this Audiovox handheld portable cellulartelephone, that should this product or any part thereof during normalconsumer usage and conditions, be proven defective in material orworkmanship that results in product failure within the first twelve (12)months period from the date of purchase, such defect(s) will berepaired or replaced (with new or rebuilt parts) at the Company’soption, without charge for parts or labor directly related to the defect(s).The antenna, key pad, display, rechargeable battery and batterycharger, if included, are similarly warranted for twelve (12) months fromdate of purchase.This Warranty extends only to consumers who purchase the product inthe United States or Canada and it is not transferable or assignable.This Warranty does not apply to:(a) Product subjected to abnormal use or conditions, accident,mishandling, neglect, unauthorized alteration, misuse, improperinstallation or repair or improper storage;(b) Product whose mechanical serial number or electronic serial numberhas been removed, altered or defaced.(c) Damage from exposure to moisture, humidity, excessivetemperatures or extreme environmental conditions;(d) Damage resulting from connection to, or use of any accessory orother product not approved or authorized by the Company;(e) Defects in appearance, cosmetic, decorative or structural items suchas framing and non-operative parts;(f) Product damaged from external causes such as fire, flooding, dirt,sand, weather conditions, battery leakage, blown fuse, theft orimproper usage of any electrical source.The Company disclaims liability for removal or reinstallation of theproduct, for geographic coverage, for inadequate signal reception bythe antenna or for communications range or operation of the cellularsystem as a whole.To obtain repairs or replacement within the terms of this Warranty, theproduct should be delivered with proof of Warranty coverage (e.g.dated bill of sale), the consumer’s return address, daytime phonenumber and/or fax number and complete description of the problem,transportation prepaid, to the Company at the address shown below orto the place of purchase for repair or replacement processing.CH8CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-30.png)
![12 MONTH LIMITED WARRANTY138In addition, for reference to an authorized Warranty station in your area,you may telephone in the United States (800) 229-1235, and in Canada(800) 465-9672 (in Ontario call 905-712-9299).THE EXTENT OF THE COMPANY’S LIABILITY UNDER THISWARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENTPROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’SLAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASERFOR THE PRODUCT.ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,SHALL BE LIMITED TO THE DURATION OF THIS WRITTENWARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY MUSTBE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OFORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BELIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTALDAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,EXPRESS OR IMPLIED, WHATSOEVER. THE COMPANY SHALL NOTBE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THISWARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT ISBEING REPAIRED OR REPLACED.No person or representative is authorized to assume for the Companyany liability other than expressed herein in connection with the sale ofthis product.Some states or provinces do not allow limitations on how long animplied warranty lasts or the exclusion or limitation of incidental orconsequential damage so the above limitation or exclusions may notapply to you. This Warranty gives you specific legal rights, and you mayalso have other rights which vary from state to state or provinceto province.IN USA : UTStarcom/Audiovox Communications555 Wireless Blvd.Hauppauge, NY 11788(800) 229-1235IN CANADA : UTStarcom Canada Company5155 Spectrum Way, Unit #5Mississauga, Ontario L4W 5A1(800) 465-9672CH8](https://usermanual.wiki/Pantech/TX-215.User-Manual-2/User-Guide-527388-Page-31.png)