Pantech TX-215 Dual-Mode CDMA Phone (CDMA/ PCS CDMA) User Manual TX 215 verizon 050616
Pantech Co., Ltd. Dual-Mode CDMA Phone (CDMA/ PCS CDMA) TX 215 verizon 050616
Pantech >
Contents
- 1. User Manual 1
- 2. User Manual 2
- 3. User Manual
- 4. Users Manual
Users Manual
![ACCESSING THE MENUCH2Your phone can be customized via the menu. Each function can beaccessed by scrolling with the Navigation Key or by pressing thenumber that corresponds with the menu item.1To access the menu in the idle mode, press [MENU].2Use the Navigation Key to scroll through themenu.3To return to the previous page, press .To exit the current menu and return to the idlemode, press . 4Press the Navigation Key to enter a functionwhen its main page is displayed or press itsassigned number to have direct access to the function.17CH2TURNING THE PHONE ON1Press and hold until your “Power On” logo appears and the tone sounds.• If “Password” appears on the display enter your 4-digitpassword to unlock your phone.• The default password is the last 4 digit of your phonenumber.16TURNING THE PHONE OFF1Press and hold until your “Power Off” logoappears.• Immediately change or recharge the battery when “LOW BATTERY!! PHONE IS TURNING OFF!” appears onthe display. Memory may possibly be damaged if the phoneturns off due to the battery completely draining.• Turn the phone off before removing or replacing the battery.If the phone is on, unsaved data may be lost.Hotkey In idle mode, move the Navigation Key as follows to access these functions:• Upward movement : Web Browser• Downward movement : Shortcut Key• Rightward movement : Get It Now• Leftward movement : Get PixTURNING THE PHONE ON / OFFlTo search through the menu in numerical order, press the Navigation Key.Get It NowMessagingContactsRecent CallsSettings & Tools](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-9.png)
![BASIC FUNCTIONSCH221CH220BASIC FUNCTIONSMAKING A CALL1Enter a phone number.To modify the phone number you have entered :• To erase one digit at a time press .• To erase the entire number, press and hold .To send the txt or pix message with phone number :• To enter a part of the phone number, then press[Options], select “Send TXT Msg or Send PIX Msg”. Please refer to page 95 or page 96 for more details on“Send TXT Msg or Send PIX Msg”.2Press . The indicator, , appears on the display.• If “CALL FAILED” appears on the display or the line is busy,press or . • If you activate the “AUTO RETRY” function, the phone willautomatically retry for the number of times you haveselected. (refer to page 66).• When you place or receive a call from stored phonenumbers, saved the name will be displayed.• There is another way to make a call through the VR mode,which is called “VAD (Voice Activated Dialing)”. Please refer to page 68 (Voice Service) for more details.• If “Enter Lock Code” appears on the display enter your 4-digit password to unlock your phone.3To end a call, press .To ignore incoming calls, press [Ignore].ANSWERING CALLS1When your phone rings or vibrates, press to answer the incoming call. (Depending on your phone’s settings, you mayalso answer incoming calls by opening thephone or by pressing any digit key.)2To end a call, press .The speaker phone feature lets you hear audio through the speaker andtalk without holding the phone.SPEAKER PHONE1To activate the speaker phone in idle, answeringor calling modes, press .2The phone returns to normal (Speaker Phone Off)after ending a call or when the phone is turned offand back on.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-11.png)
![BASIC FUNCTIONS BASIC FUNCTIONSCH223CH222ANSWERING A CALL1To answer a call, press any key except , ,, , , or .2To end the call, press .In Auto Answer Mode a call is automatically answered after 5 seconds of ring tones. See page 65 for more details.If one of the people you called hangs up during your call, youand the remaining caller stay connected. If you initiated the calland are the first to hang up, all three callers are disconnected.lBy pressing [MENU] tnen select “Settings & Tools” menu,press , you can select either “Flip Open”, “Any Key”or “Send Only” to answer a call. lf “Send Only” is selected, thephone can only be answered by pressing . See page 65 for more information.With 3-Way Calling, you can talk to two people at the same time. Whenusing this feature, the normal airtime rates will be applied for each of thetwo calls.3-WAY CALLING1Enter a number you wish to call then press .2Once you have established the connection,enter the second number you wish to call thenpress .3When you’re connected to the second party,press again to begin your 3-Way call.Pauses are used for automated systems (i.e., voice mail, calling cards).Insert a pause after a phone number then enter another group ofnumbers. The second set of numbers is dialed automatically after thepause. This feature is useful for dialing into systems that require a code.WAIT/PAUSE FEATURE1To insert a wait/pause, enter a phone numberthen press [OPTIONS]. Select either a 2-SecPause (“P” appears) or a Wait (“W” appears).2Press to dial or to save.Please refer to page 30 for more details about storing a phone number.Identifies caller by displaying their phone number. If the caller’s nameand number are already stored in your phone book, they name willappear. The caller ID is stored in the recent calls.CALLER ID FUNCTION](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-12.png)
![BASIC FUNCTIONS BASIC FUNCTIONSCH225CH224ENTER LOCK MODE1To lock the phone, press and hold .2To unlock the phone, press or [UNLOCK],then input your password, then press [OK].The lock feature will deactivate when the phone is powered off. Upon next power up, you will need to press to lock phone again.lNotifies you of an incoming call when you are already on a call bysounding a beep tone and displaying the caller’s phone number.CALL WAITING FUNCTION1To answer another call while on the phone,press . This places the first call on hold. To switch back to the first caller, pressagain.Adjusts the volume of the ringer, key beep and speaker.ADJUSTING VOLUME1Press [MENU], then select “Settings & Tools”menu, press then select one of the following.2Adjust volume then press [OK] to save it.Master Volume : Controls the ringer volume.Keypad Volume : Controls the keypad volume.Earpiece Volume : Controls the earpiece volume.lll• To adjust earpiece volume during a call, press the NavigationKey up or down.• To adjust master volume, press short side up/ down key.•In Idle Mode:Side Volume Up key Long Press: Set volume to out of silence.Side Volume Down key Long Press: Set volume to silence.Call Waiting is a system dependent feature. Please contact yourservice provider for details.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-13.png)
![DURING A CALL DURING A CALLCH227CH226Increases security during a call.VOICE PRIVACYEnables the network to locate your current location through GlobalPositioning System (GPS). (Refer to page 62 for more details.)LOCATION1Press [OPTIONS] .1Press [OPTIONS] .Enables you to send a TXT message (SMS) during a call.To display menu options during a call, press [Options].SEND TXT MSG1Press [OPTIONS] .To select the phone number in your recent calls List.RECENT CALLSTo select the phone number in your internal Contact List.CONTACTS1Press [OPTIONS] .1Press [OPTIONS] .The caller cannot hear you or any sounds from your side but you canstill hear them.MUTE (UNMUTE)1Press [Mute].To deactivate, press [UNMUTE].The phone will automatically un-mute in Emergency Call or Callback mode.ll](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-14.png)
![Enter a name. Please refer to page 31 for more details onentering letters, numbers & symbols. To change the input mode, press [Abc]. Press the Navigation Key down to select otheroptions (Mobile1.2, E-mail1.2, etc...). If entered phone number, press [OPTIONS] to select one of the following options:STORING A PHONE NUMBERENTERING LETTERS, NUMBERS & SYMBOLSCH3The input mode (Alpha editor) will automatically be activated whennecessary to enter letters and numbers. As shown below, there are 4available modes ; Standard input mode (Abc), T9 input mode(T9Word), Numeric mode (123), and Symbol mode (Symbols).The following illustrates the function assigned to each key in theAlpha Editor.31CH.3The phone book stores up to 500 entries.1Enter phone # then press [SAVE] thenchoose “Create New” or “Update Existing”.Press [OK] to select. The input mode indicator appears on the upper right ofthe display when letters and numbers are entered. Toselect the desired input mode among the 5 modes below,press [Abc], then enter letters and numbers.2If “Create New” is selected, the phone numberwill appear above a list. Press the NavigationKey up or down to choose the type of numberyou’re adding, as indicated by the icon. Press [OK] to select. If “Update Existing” isselected, your contact list is displayed. Choosethe entry to add the phone number to, thenpress [OK]. You will then see the phonenumber listed about a list. Press [OK] to select.34To store the entry, press [SAVE]. “SAVED” will be displayed.30AbcNextSpaceCaps LockClearSendPress to change mode.[T9Word][Abc][ABC][123][Symbols]Press to view the next matching word ifthe highlighted word is not the word youintended.Press to accept a word and add a space.Press to select a letter case of thestandard text input or T9 text input mode.[Abc], [ABC] and [abc] indicate thestandard text input.[T9Word], [T9WORD] and [T9word]indicate the predictive text input.Press and hold to change mode.Press to delete a character to the left ofthe cursor.Send the letters and numbers you enter.KEY FUNCTIONlSet Speed DiallSet Voice DiallSet As DefaultlAdd PauseInput mode indicatorT9Word : T9 modeAbc : Abc modeABC : ABC mode123 : Number modeSymbols : Symbol mode](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-16.png)
![ENTERING LETTERS, NUMBERS & SYMBOLS ENTERING LETTERS, NUMBERS & SYMBOLSCH3The T9 input mode incorporates a built-in-dictionary to determine aword based on the entered characters. A word can be entered morequickly by pressing a key once per character.T9 INPUT MODE1Select the T9Word mode by pressing [Abc].2Press a digit key once to enter the characteryou want then enter all the characters to inputthe word you want.3To view the next matching word, press .To enter a compound word:• Enter the first part of the word then press to accept it.• Enter the last part of the word then press to enter the word.Select Abc mode by pressing [Abc].When you select this mode, the Abc icon appears as a visualconfirmation.- Find the key that corresponds to the letter you want to enter.- Press it as many times as needed for the letter to appear on thescreen.- To enter the name “John”:Press [ ] JPress [ ] oPress [ ] hPress [ ] n33CH3Use the digit keys to enter letters, numbers and characters.STANDARD INPUT MODE1Enter letters using the key pad as follows:2To enter a space, press . The cursor willautomatically move to the next column.3Repeat until letters are entered. There is a 16-letter limit.4To delete one digit, press . If you press and hold , it will delete lettersword by word, and numbers in whole.To change the input mode, press [Abc].Press and hold , until the desired symbolappears (.@?!-...).32Key Pad2ABC3DEF4GHI:9WXYZADG:WBEH:XCFI:Y234:ZADG:91 TimeRepetitions2 timesRepetitions3 timesRepetitions4 timesRepetitions5 times4To accept the matching word then enter aspace, press .5To change from lowercase to uppercase, press .To enter “Fun fare” in the T9 input mode.- After you enter the 1st letter, press [Abc] to select T9 modeand to choose the lower case (T9Word).- Press and you will see “Fun” highlighted. Press to select it.- Press and until you see “ease” highlighted. Press to select the next matching word, you will see “fare” then enter a space.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-17.png)
![ENTERING LETTERS, NUMBERS & SYMBOLS MAKING A CALL THROUGH THE PHONE BOOKCH3NUMERIC MODE1Press [Abc] and scroll to the input mode tochanges to “Symbols (Symbol mode)”. 35CH3341Press [Abc] and scroll to the input mode tochanges to “123 (Numeric mode)”.2To enter a number, press a digit key.Press [ ],orPress [ ].2Select symbol you want to enter with theNavigation Key.lUse the Navigation Key to view a different line of symbols.SYMBOL MODEAllows you to enter numbers.Allows you to enter symbols.Ideal for frequently dialed numbers, this feature allows phone bookentries to be dialed via the keypad with only one or two key presses.ONE-TOUCH/TWO-TOUCH DIALING1-9 : Press and hold the corresponding memory number for more than 1 second.ONE-TOUCH DIALING:10-22/97-99 : Press the first digit and second digits of the memory number short and long respectively.TWO-TOUCH DIALING:• If no phone number is stored in the location entered,“UNASSIGNED LOCATION” will appear on the screen.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-18.png)
![CH439CH438Stores up to 500 entries, each of which can be assigned to a group.Entries can be retrieved by name or group. Retrieves an entry by name and calls by simply pressing . You can review all the entries stored in your phone book list orquickly find an entry by entering a name or its character string. CONTACT LISTCONTACTS CONTACTS12345Press [MENU], then press “Contact List”or press [CONTACTS].Enter a name or its character string or scrollthrough the list with the Navigation Key. Please refer to page 31 for more details onentering letters, numbers & symbols.The list of names in your phone book isdisplayed alphabetically.To edit the entry, press [EDIT]. To show detail the entry, press [VIEW]. Press [OPTIONS] to 1. New Contact, 2. Erase,3. Send TXT Msg, 4. Send PIX Msg or 5. Call.To call the selected number, press [OPTIONS]then select “Call” or press .12Press [MENU], then press “NewContact”.Adds a new entry.NEW CONTACTTo enter a name or number, use the NavigationKey to select the phone book field.Please refer to page 31 for more details on enteringletters, numbers & symbols.33.1 To save the entry, press [SAVE]. 3.2 To return to the previous page, press .PHONE BOOK FIELDS :Name/Mobile1/Home/Work/E-mail1/Group/Picture/Ringtone/Mobile2/Fax/E-mail2.Under “Mobile 1”, “Mobile 2”, “Home”, “Work” or “Fax”,input the phone number, then by press [OPTIONS], you can choose from the following:1. Set Speed Dial2. Set Voice Dial3. Set As Default4. Add PauseUnder “Picture”, to select image, then by press [SET].(Please refer to page 88 “My PIX” for more details.)Under “Ringtone”, to select tone, then by press [SET].(Please refer to page 85 “My Ringtones” for more details.)llll• If user not input at least one field among number, e-mail thendisplay “NO DATA ENTERED” in dialogue box.• If name field is empty in edit contact but one of phone numberfield inserted then saved so display default number in contactslist.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-20.png)
![CH4CH440CONTACTS CONTACTS41CHANGE GROUP NAME2Select an existing group name that you haveadded with the Navigation Key.4Input a new group name.5To save it, press [SAVE].3To select “Rename”, press [OPTIONS].1Press [MENU], then press “Groups”.GROUPSAllows you to classify phone entries into groups. Existing groupsinclude Family, Work. A maximum of 30 groups is allowed. Predefinedgroup that can’t rename or Erase. User can add group max 28 group.Allows the user to add group up to 10 phone number. The user canadd, change, and erase Group.13Press [MENU], then press “Groups”.ADD NEW GROUPInput a new group name.4To save it, press [SAVE].2To select “New”, press [NEW].1Press [MENU], then press “Groups”.13To assign phone numbers to a Group, select “Add”, press [OPTION].ASSIGN PHONE NUMBER TO GROUPSelect the contact for the group thenpress [DONE]. “CONTACTS ADDED TOGROUP” will be displayed.Repeat for each location for the Group.2“unassigned” locations appear. Select a location and press [OK]. Your phone book entries will be displayed inalphabetical order.SEND TXT MSG. GROUP2Select an existing group name with theNavigation Key.4Input a “Message”, press [OPTION] toselect “Save as Drafts”and “Priority Level”.53To select “Send TXT Msg.”, press [OPTIONS].5.1. To send the txt message, press [SEND].5.2. To save the txt message, press [OPTIONS]then select “Save as Drafts”, then press [OK].](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-21.png)
![CH4CH442CONTACTS CONTACTS43In idle mode, calls can be placed to numbers stored in speed dial bypressing & holding the location number on the key pad. For a 2-digitlocation number, press the first number, then press and hold thesecond number.SPEED DIALS12To assign a phone number to a location, selectthe location then press [SET].3Select the contact with the Navigation Key thenpress [OK].4To select “Yes”, press [OK].5“SPEED DIAL SET” will be displayed.• “Unassigned” appears if the location is available.• To call an assigned number, press & hold the last digit of thespeed dial #.ERASE GROUP2Select an existing group name with theNavigation Key.3To select “Erase”, press [OPTIONS].4Select “Yes” to erase it, press [OK].1Press [MENU], then press “Groups”.SEND PIX MSG. GROUP1Press [MENU], then press “Groups”.2Select an existing group name with theNavigation Key.4Input a “Text”, “Picture”, “Sound”, “Subject”,press [OPTION] to select “Preview”, “Add Quick Text”, “Save as Drafts”, “PriorityLevel” and “Add Slide”.53To select “Send PIX Msg”, press [OPTIONS].5.1. To send the pix message, press [SEND].5.2. To save the pix message, press [OPTIONS] then select “Save as Drafts”, then press [OK].Press [MENU], then press “Speed Dials”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-22.png)
![CH445CH444RECENT CALLS RECENT CALLSDisplays information about the 90 most recently missed calls. Place a call to a missed call number by simply pressing . To see a list of the 90 most recently missed calls, press [MENU], then select “RecentCalls” menu, press “Missed”. If thenumber is already stored in your phone book,only the name appears. If the number is notstored, only the phone number appears.MISSED12To view missed call details, press [OPEN].Call details include date, time and phone number.• After 90 missed calls, the oldest call will automatically be erased from the history.• Press [MESSAGE], to send the TXT or PIX message.3Save : To store the phone number in your phone book.Details : To view the caller’s information.Erase : To erase a missed calls list.Lock/Unlock : To lock or unlock missed calls list.Erase All : To erase all missed calls list.View Timers : To display usage time.llllllPress [OPTIONS] and select “SAVE” tosave it or select “Erase” to delete it.Call details include date, time and phone number.• After 90 received calls, the oldest call will automatically be erased from the history.• Press [MESSAGE], to send the TXT or PIX message.Displays information about the 90 most recently answered calls. Place a call to a received call by simply pressing .RECEIVED1To see a list of the 90 most recently answeredcalls, press [MENU], then select “RecentCalls” menu, press “Received”. If thenumber is already stored in your phone book,only the name appears. If the number is notstored, only the phone number appears.2To view incoming call details, press [OPEN].3Save : To store the phone number in your phone book.Details : To view the caller’s information.Erase : To erase a received calls list.Lock/Unlock : To lock or unlock received calls list.Erase All : To erase all received calls list.View Timers : To display usage time.llllllPress [OPTIONS] and select “SAVE” tosave it or select “Erase” to delete it.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-23.png)
![CH447CH446RECENT CALLS RECENT CALLSCall details include type of call, date, time and phone number.• After 90 dialed calls, the oldest call will automatically be erased from the history.• Press [MESSAGE], to send the TXT or PIX message.Displays information about the 90 most recently dialed numbers.Place a call to a dialed call by simply pressing .DIALED1To see a list of the 90 most recently dialednumbers, press [MENU], then select“Recent Calls” menu, press “Dialed”. If the number is already stored in your phonebook, only the name appears. If the number isnot stored, only the phone number appears.2To view dialed call details, press [OPEN].3Save : To store the phone number in your phone book.Details : To view the caller’s information.Erase : To erase a dialed calls list.Lock/Unlock : To lock or unlock dialed calls list.Erase All : To erase all dialed calls list.View Timers : To display usage time.llllllPress [OPTIONS] and select “SAVE” tosave it or select “Erase” to delete it.Call details include type of call, date, time and phone number.• After the 270 received, dialed or missed calls, the oldestcall will automatically be erased from the history.• Press [MESSAGE], to send the TXT or PIX message.Displays information about the most recent incoming, outgoing andmissed calls.ALL1To see a list of the 270 most recent incoming,outgoing and missed calls, press [MENU], then select “Recent Calls” menu, press “All”. If the number is already stored in your phone book,only the name appears. If the number is not stored,only the phone number appears.23To view details, press [OPEN].Save : To store the phone number in your phone book.Details : To view the caller’s information.Erase : To erase a recent calls list.Lock/Unlock : To lock or unlock recent calls list.Erase All : To erase all recent calls list.View Timers : To display usage time.llllllPress [OPTIONS] and select “SAVE” tosave it or select “Erase” to delete it.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-24.png)
![CH44948CH4SETTINGSRECENT CALLSChecks the usage time and manages your calls within the limit youset. The 11 timers include (Last Call, All Calls, Received Calls, Dialed Calls, Roaming, Transmit Kilobytes, Received Kilobytes, TotalKilobytes, Last Reset, Lifetime Calls, Lifetime Data Counter):VIEW TIMERSPress [MENU], then select “Recent Calls”menu, press “View Timers”.To reset the timer, press [RESET], then select “Yes”, press .To reset all timer, press [RESET ALL], then select “Yes”, press .To return to the previous page, press [OK].123Controls the Ringer volume and alerts you to incoming calls in themodes listed in the gray box below.Customizes your phone and optimizes performance through a varietyof settings.SOUNDSMASTER VOUME2Select one of the following options by pressingthe Navigation Key to the right.3Select one of the available ring types.To confirm, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select“Master Volume”.All Sounds OffAlarm OnlyVibrate OnlyLow, Med Low, Med, Med High, High.Press to play sound.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-25.png)
![CH451CH450SETTINGS50SETTINGSTo select a ringer type for incoming calls:CALL SOUNDS2Select your desired ringer type.3Select one of the available ring types.To confirm, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Call Sounds”, press “Call Ringtone”.Up or Down key : Select “Ringer”.Press Play/Pause to Play/Pause the ringer.CALL RINGTONE2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Call Sounds”, press “Call Vibrate”.CALL VIBRATEWhen selected, this setting alerts you to the following handset changes:ALERT SOUNDS1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Alert Sounds”, press “TXT Message”.TXT MESSAGE2Select “Tone”, “Vibrate” or “Reminder” with theNavigation Key then select one of the followingoptions by pressing the Navigation Key.Tone : Select your desired ringer type.Vibrate : Select “On” or “Off”.Reminder : Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.3To save, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Alert Sounds”, press “PIX Message”.PIX MESSAGE2Select “Tone”, “Vibrate” or “Reminder” with theNavigation Key then select one of the followingoptions by pressing the Navigation Key.Tone : Select your desired ringer type.Vibrate : Select “On” or “Off”.Reminder : Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.3To save, press [OK].](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-26.png)
![CH453CH452SETTINGS52SETTINGS1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Alert Sounds”, press “Voicemail Msg”.VOICEMAIL MSG2Select “Tone”, “Vibrate” or “Reminder” with theNavigation Key then select one of the followingoptions by pressing the Navigation Key.Tone : Select your desired ringer type.Vibrate : Select “On” or “Off”.Reminder : Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.3To save, press [OK].To adjust key pad tone:KEYPAD VOLUME2Select one of the following options by pressingthe Navigation Key to the right.3Select one of the available ring types.To confirm, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select“Keypad Volume”.OffLow, Med Low, Med, Med High, HighTo adjust earpiece volume:EARPIECE VOLUME2Select one of the following options by pressingthe Navigation Key to the right.3Select one of the available ring types.To confirm, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select“Earpiece Volume”.Low, Med Low, Med, Med High, High](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-27.png)
![SETTINGS SETTINGSCH455CH454SERVICE ALERTS1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Service Alerts”, press “ERI”.ERI2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.Sounds an alert every minute during a call.1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Service Alerts”, press “Minute Beep”.MINUTE BEEP2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.Notifies you that a call has been successfully placed.1Press [MENU], then select “Settings & Tools”menu, press “Sounds” then select “Service Alerts”, press “Call Connect”.CALL CONNECT2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.Allows you to customize the display.DISPLAYTo input a personal/ERI banner greeting:The text greeting can be up to 16 characters and is displayed onyour phone’s screen in standby mode.BANNER2Enter a new personal greeting.To change the input mode, press [Abc]. 3Press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Banner”, press “Personal”.PERSONAL2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Banner”, press “ERI Banner”.ERI BANNER](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-28.png)
![SETTINGS SETTINGSCH457CH456Backlights the display and key pad and activates dimming for easyviewing in dark places.BACKLIGHT2Select one of the following options with theNavigation Key.3Press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Backlight”, press “Display”.DISPLAY5 Seconds, 15 Seconds, 30 Seconds, Always On, Always Off2Select one of the following options with theNavigation Key.3Press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Backlight”, press “Keypad”.KEYPAD5 Seconds, 15 Seconds, 30 Seconds, Always On, Always OffTo adjust the display contrast:CONTRAST3Press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Contrast”.2Select “Main LCD” or “Sub LCD” then select oneof the following options with the Navigation Key.Leve 1 ~ Leve 5WALLPAPER1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Wallpaper”.2Select Default to choose a pre-installed display,Downloads or Pix # to choose a display youhave downloaded to your phone.To launch “BREW”, press [GET NEW]. To expand selected image, press [VIEW].3Select a display from the Animation and theGraphic list using the Navigation Key and press [OK] to save it.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-29.png)
![SETTINGS SETTINGSCH459CH458DISPLAY THEMES3Press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Display Themes”.2Select one of the following options with theNavigation Key.Original, Tropical, Business, BlueSCREENSAVER1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Screensaver”.2Select Default to choose a pre-installed display,Downloads or Pix # to choose a display youhave downloaded to your phone.To launch “BREW”, press [GET NEW]. To expand selected image, press [VIEW].3Select a display from the Animation and theGraphic list using the Navigation Key and press [OK] to save it.FONTS1Press [MENU], then select “Settings & Tools”menu, press “Display” then select “Fonts”.2Select “Normal” or “Large” with the NavigationKey then press [OK] to save it.SYSTEMSTANDALONE MODE1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Standalone Mode”.2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.Selects the Preferred System.SYSTEM SELECT1Press [MENU], then select “Settings & Tools”menu, press “System” then select “System Select”.3Press [OK] to save it.2Select one of the following options with theNavigation Key.Automatic BAutomatic AHome Only](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-30.png)
![SETTINGS SETTINGSCH461CH460Enables Auto NAM (Number Assignment Modules) or manuallyselects a NAM.NAM SELECTION1Press [MENU], then select “Settings & Tools”menu, press “System” then select “NAM Selection”, press “Auto NAM”.3Press [OK] to save it.2Select one of the following options with theNavigation Key.NAM 1 - VERIZONNAM 2 - VERIZONAutomatically switches phone to proper NAM when you have multipleNAM registrations.AUTO NAM2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “System” then select “NAM Selection”, press “Change NAM”.Changes the NAM used by the phone when you have multipleregistrations.CHANGE NAMDisplays the information of your phone:DEVICE INFO1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Device Info”, press “My Number”.Displays the your phone number (MDN/MIN number and provider) :MY NUMBER3To return to the previous page, press [OK].3To return to the previous page, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Device Info”, press “SW Version”.Displays the (Software/PRL/ERI/Browser/Get It Now) version.SW VERSION2You are to see the Indicator Icons of yourcellular telephone.2You are to see the version of software,hardware and others.2You are to see the MDN/MIN number andprovider name.3To return to the previous page, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Device Info”, press “Icon Glossary”.Displays the Indicator Icons of your cellular telephone.ICON GLOSSARY](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-31.png)
![SETTINGS SETTINGSCH463CH462To determine whether or not the network system can detect yourposition:LOCATION1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Location”.3Press [OK] to save it.2Select one of the following options with theNavigation Key.Location OnE911 Only4Press [OK] to save it.Device : Lock, Unlock, On Power UpLocation : Lock, UnlockPrevents unauthorized use of your phone. The following settings canbe restricted:Prevents the phone from being used without entering the password first.SECURITY1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Security”, then enter your password, press [OK].3Select “On” or “Off” with the Navigation Keythen press [OK] to save it.2Select “Common Code”.COMMON CODEThe default password is the last 4 digit of your phone number.1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Security”, then enter your password, press [OK].3Select “Device” or “Location” then select one ofthe following options with the Navigation Key.2Select “Lock Mode”.LOCK MODEThe default password is the last 4 digit of your phone number.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-32.png)
![SETTINGS SETTINGSCH465CH4644Enter a “New Code” then press [OK]. 5Enter a “Confirm Code” then press [OK] to save it. 1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Security”, then enter your password, press [OK].3Select “Device” or “Location” then select one ofthe following options with the Navigation Key.2Select “Edit Code”.EDIT CODEThe default password is the last 4 digit of your phone number.Changes your Device/Location 4-digit password.Selects the language in which letters are displayed on the screen.LANGUAGE1Press [MENU], then select “Settings & Tools”menu, press “System” then select “Language”.3Press [OK] to save it.2Select “English” or “Spanish” with the NavigationKey.CALL SETTINGSANSWER OPTIONS1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Answer Options”.2Select one of the following with the Navigation Key.3To save, press [OK].To select an answer mode:Flip OpenAny KeySend OnlyAuto Answer – HandsfreeAuto Answer – HeadsetAuto Answer – Handset](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-33.png)
![CH467SETTINGSCH466SETTINGS1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Auto Retry”.Automatically redials a call up to 5 times after a set time interval.23Retry time to field is shown. Press the NavigationKey left or right to choose the amount of time. (Off, 3 Seconds, 5 Seconds, 7 Seconds or 10 Seconds)When a time is chosen for retry time, the repeatfield is shown. Press the Navigation Key down tohighlight the repeat field. Press the NavigationKey left or right to choose the number ofrepeats. (1 time, 3 times or 5 times).4To save, press [OK].AUTO RETRY1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “TTY Mode”.Your phone is able to operate with a TTY (Teletypewriter) device inboth analog and digital modes. This feature is system dependent andmay not be available in all areas.3To save, press [OK].TTY MODE2Select one of the following with the Navigation Key.TTY Off/TTY+ TALK/TTY + HEAR/TTY FulllEnhances voice privacy and avoids tapping during a call.Enhanced : Makes it more difficult to wire tap.l1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “One Touch Dial”.ONE TOUCH DIAL2Select “On” or “Off” with the Navigation Key thenpress [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Voice Privacy”.VOICE PRIVACY2Select “Standard” or “Enhanced” with theNavigation Key, then press [OK] to save it.1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Data Setting”.Choose the connection mode for the usage of your phone.3To save, press [OK].DATA SETTING2Select one of the following connection modeswith the Navigation Key.Voice Call : To receive a voice call.Data Only : To receive data when connected to PC.ll](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-34.png)
![CH469SETTINGSCH468SETTINGS1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Voice Services”, press “Voice Memo”.VOICE SERVICESVOICE MEMO2To record a voice memo, select “Record New”,press [OK].3To start recording a voice memo, press [OK].Voice Memo allows you to record a reminder message that can be upto 60 seconds. To record a memo:4To stop recording a voice memo, press [STOP].To saved into voice memo list automatically. Voice memo order by date and recent file isuppermost.1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Voice Services”, press “Voice Setting”.VOICE SETTING2Under “Set Active”, select a option “Off”, “Active Flip” or “Send Key”.3Under “HFK Mode”, select a option “On” or “Off”.After turning on Set Active, open the flip to go on to VR mode. Afterturning on HFK mode, put Hands-free kit and say “wake up” to go onto VR mode.1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Voice Services”, press “Voice Dial”.4To save, press [OK].Voice Dial allows you to call a person by simply saying their name.To access Voice Dial:2.1. Press [NEW]. The phone book list will be displayed alphabetically. Select a name then press [OK]. Instructions (Please OK and say name) will be displayed and [OK]. You will hear “Name Please”.2.2. Say the name for the voice tag and repeat the name when prompted. You will hear “Added”.To play a voice dial. Highlight the voice tag you want to play then press [PLAY].To detail a voice dial. Highlight the voice tag you want to detail viewthen press [OPTIONS] then select “Detail”.To re-record a voice dial. Highlight the voice tag you want to re-record thenpress [OPTIONS] then select “Re-record”.To erase or erase all voice dial. Highlight the voice tag you want to erase or eraseall then press [OPTIONS] then select “Erase”or “Erase All”. To play speaker a voice dial. Highlight the voice tag you want to play speakerthen press [OPTIONS] then select “PlaySpeaker”.VOICE DIAL234567](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-35.png)
![CH471SETTINGSCH470SETTINGS1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “Voice Services”, press “Train Word”.TRAIN WORD2Under “Yes”, “No”, “Wake-Up”. “Please listen closely to hear instructions” will bedisplayed and you will hear “Now training controlwords. Please say the word”. Say word. You willhear “Again”. Say word again. You will hear“Training word successful”.To undo voice recognition, select a word you wantto undo then press [UNDO].3Under “Undo Train All”.“Undo voice recognition for all procedures?” will be displayed. Press [OK] to undo alltrained words.Train allows you to use Control words to make a call without usingthe keypad. Use to train or untrain the Voice Recognition with thecontrol word, “Yes”, “No” or “Wake-Up”.1Press [MENU], then select “Settings & Tools”menu, press “Call Settings” then select “DTMF Tones”.3To save, press [OK].DTMF TONES2Select one of the following with the Navigation Key.NormalLongllTo adjust tone length:5To play voice memo, select the message you wantto play then press [PLAY].To send voice memo, select the message you wantto send then press [SEND] to access the “NewPix Msg” see “New Pix Msg” on page 96.If saved voice memo, press [OPTIONS] to selectone of the following options:lRenamelEraselErase All](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-36.png)
![SETTINGS SETTINGSCH473CH472CLOCK FORMAT1Press [MENU], then select “Settings & Tools”menu, press “Clock Format” then select “Main Clock”.3To save, press [OK].MAIN CLOCK2Select one of the following with the Navigation Key.DigitalAnalogOfflllTo change the main clock’s appearance on the standby screen:1Press [MENU], then select “Settings & Tools”menu, press “Clock Format” then select “Front Clock”.3To save, press [OK].FRONT CLOCK2Select one of the following with the Navigation Key.DigitalAnalogOfflllTo change the front clock’s appearance on the standby screen:RINGER ID12Press [MENU], then select “Settings & Tools”menu, press “Ringer ID”.Select “On” or “Off” with the Navigation Key,then press [OK] to save it. (Default setting is “Off”)PICTURE ID12Press [MENU], then select “Settings & Tools”menu, press “Picture ID”.Select “On” or “Off” with the Navigation Key,then press [OK] to save it.(Default setting is “Off”)](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-37.png)
![CH475TOOLSCH474TOOLSUse the keypad to change or enter the end date. END DATEUse the keypad to entering a count.BY COUNTUse the Navigation Key to select a time zone.(OFF,EST, EDT, CST, CDT, MST, MDT, PST,PDT, AKST, AKDT, HAST, HADT or GMT/UTC). TIME ZONESUse the keypad to select the alert tone you wishto set.ALERTUse the Navigation Key to select vibrate on/off.VIBRATEUse the Navigation Key to select an alert timeinterval option (0 Minutes, 5 Minutes, 10 Minutes, 15 Minutes). REMINDER4Press [SAVE] to save it or [CLR] toreturn to the calendar.5The date of the event will be marked on yourcalendar.1To view the Calendar List.VIEW PLAN LIST2Move the Navigation Key to choose an event thenpress [VIEW]. Press [ERASE], then select “Yes”, press .CALENDARADD NEWSets an event and reminds you of that event.23Move the Navigation Key left, right, up or down tochoose a date in the calendar then press [OK].Press [OPTIONS] to 1. New, 2. Go To Date, 3.Erase Passed or 4. Erase All.Press [MONTHLY/WEEKLY] to exchangedisplay mode.Use the keypad to set a start time and toselect “AM” or “PM”. START TIMEUse the keypad to entering a appointment of yourschedule. APPOINTMENTUse the keypad to change or enter the start date. START DATEUse the Navigation Key to select a setting for therepeat repeating the calendar. (Daily, Weekly,Monthly or Yearly). RECURRENCEThe date field is highlighted. Press the NavigationKey down to set the alarm options.Use the keypad to set a end time and toselect “AM” or “PM”. END TIME1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select“Calendar”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-38.png)
![CH477TOOLSCH476TOOLSTo display the time and date in pre-programmed cities:WORLD CLOCK24Select a city with the [CITIES].Or use the Navigation Key to select another city.3The world map appears with the city, its dateand time.• If user press [DST], then all DST supporting cities DST turnon/off.To return to the previous page, press [OK].1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “World Clock”.ALARM CLOCKSelect one of the entries using the Navigation Key.To set a new alarm, choose alarm 1, 2 or 3.To edit an existing alarm, select that alarm. Press [OK].21The setting field will be highlighted. Press theNavigation Key down to select alarm options.3Use the Navigation Key to select a setting for thealarm (Once, Daily, Mon - Fri, Weekends). FREQUENCYPress [MENU], then select “Settings & Tools”menu, press “Tools” then select “Alarm Clock”.Use the Navigation Key to select alarm on/off.ALARMUse the keypad to set a time for the alarm andto select “AM” or “PM”. TIMEUse the keypad to select the alert tone you wishto set.RINGERTo save an alarm setting press [SAVE].4](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-39.png)
![CH479TOOLSCH478TOOLS2Follow the instructions below to calculate8*64-2.5= 9.53To reset, press [CLEAR].To access the calculator:CALCULATORInput 8.Move the Navigation Key rightward.Input 6 then press the Navigation Key.Move it leftward.Input 4 then press the Navigation Key.Move it downward.Input 2 then press the to input (.). Press 5.Then press and you will see the answer.: X, : -, : /, : +, : ., : Clear, : =.1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Calculator”.• To change the displayed number from positive (+) to negative (-)and vice versa, press [].• If user press [OPERATOR], to use multi parenthesis support and parenthesis rules [(,)] or power [^].Your phone includes an internal notepad that can be used tocompose and store reminders and notes.NOTEPAD1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Notepad”.ADD MEMO2To add a new memo, press [NEW].Input a new text memo.(Please refer to page 31 for more details on enteringletters, numbers & symbols.)1VIEW MEMO2The list of all memos, in saved order, is displayed.Select a memo then press [VIEW].34The selected memo will appear. To edit it, press [EDIT] and input a new text memo, then press [SAVE] to save it.To compose a memo (there is an 80-letter limit):To view a saved memo:Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Notepad”.4.2. To erase a memos, press [OPTIONS] “Erase”.4.1. To add a new memo, press [NEW].4.3. To erase all memos, press [OPTIONS] “Erase All”.3To save memo, press [SAVE].](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-40.png)
![CH481TOOLSCH480TOOLS213Simultaneously times up to six different events. To operate thestop watch:STOP WATCHSHORTCUT KEYTo measure a time period.1. To start the stop watch, press [START].2. To pause it, press [STOP].3. To resume it, press [START].To reset it, press [RESET]. To time up to six events at once:1. To start, press [START].2. To stop a time period and continue measuring another one, press [CONT].3. To stop the second and continue measuring a third one, press [CONT].4. To measure up to six time periods, repeat theabove steps.5. To stop the stop watch, press [STOP].6. To review the results, press [VIEW].7. To return to the stop watch, press [OK].8. To reset it, press [RESET].Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Stop Watch”.1Press [MENU], then select “Settings & Tools”menu, press “Tools” then select “Shortcut Key”.Calendar/Tunes & Tones/My PIX/Fun & Games/News & Info/Inbox/Sent/Email/Chat/IM/Settings & Tools/Alarm Clock/CalculatorYour phone offers you the option of assigning a shortcut key (Down Navigation Key) to a favorite or often-used function. To assign a shortcut to the key:The Shortcut can now be accessed by pressingthe “Down Navigation Key”.Select your desired menu option then press[OK].23](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-41.png)
![GET IT NOWYour phone provides a unique feature -Get It Now- that enables youto download ringtones, wallpapers, games and more from yournetwork to your phone. Please contact your service provider for theavailability of these services.GET IT NOWChapter 58382CH583MY ACCOUNTCH4MY ACCOUNT12Press [MENU], then select “Settings & Tools”menu, press “My Account”.Connect “WAP Browser”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-42.png)
![CH585GET IT NOWCH584GET IT NOWGET TUNES & TONESGET NEW RINGTONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes &Tones” then select “Get New Ringtones” theselect “Get New”, press . (The BREW willlaunch and take you to the download menu.)3Use your navigation key to select a “Ringtones”you wish to download, press [OK].2Use your navigation key to select a provider’sbrowser, press [OK]. MY RINGTONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes & Tones”then press “My Ringtones”.2To play downloaded ringtones.Select the tunes or tones you want to play, thenpress [PLAY].3To assign downloaded ringtones.Select the Ringtone you want to assign, thenpress [SET AS]. Select “Call Ringtone”,“Contact” or “Alert Tone”, then select “Yes”, press .4To erase downloaded ringtones.Select the Ringtone you want to erase, then press [OPTIONS].Select “Erase”, “Rename” or “Ringtone Info”,then select “Yes”, press .By pressing [OPTIONS], you can choose from the following:1. Erase2. Rename3. Ringtone InfoRECORDING NEW TONES1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes &Tones”, select “My Sounds” then select“Record New”.3To stop recording a memo, press [STOP].2To record a voice memo, press [OK]Instructions will be displayed and you will hear“Beep Sound”. lBy pressing [SET AS], you can choose from the following:1. Call Ringtone2. Contact3. Alert Tone - 1. All Messages2. TXT Message3. PIX Message4. Voicemail Msgl](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-43.png)
![CH587GET IT NOWCH586GET IT NOWGET PIXDOWNLOADING NEW PIX1Press [MENU], then select “Get It now” menu,then press “Get PIX” or press or pressand hold side camera key, then select “GetNew PIX”, then select “Get New”. (The BREWwill launch and take you to the download menu.)3Use your navigation key to select a “Pix or Flix”you wish to download, press [OK].2Use your navigation key to select a provider’sbrowser, press [OK]. MY SOUNDS1Press [MENU], then select “Get It now” menuor press , then press “Get Tunes & Tones”then press “My Sounds”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-44.png)
![CH589GET IT NOWCH588GET IT NOWPIX PLACE2Connect “WAP Browser”.1Press [MENU], then select “Get It now” menu,then press “Get PIX” or press or pressand hold side camera key, then select “PixPlace”.TAKE PIX1Press [MENU], then select “Get It now” menu,then press “Get PIX” or press or pressand hold side camera key, then select “TakePIX”. Or press or .3Press side camera key or press and hold totake the picture.2Point the camera lens at your subject. You cancheck the picture framing through the maindisplay screen.Press [My PIX], you can view the captured pictures.By pressing [OPTIONS], you can choose from the following:1. Resolution: To select a resolution for a picture.(480x640/240x320/120x160)2. Self Timer: To activate the camera’s timer function.(Off/3 Seconds/5 Seconds/10 Seconds)3. Flash: To activate the flash function. (Off/On/Auto Flash/Only This Shot)4. White Balance: To select white balance. (Auto/Sunny/ Cloudy/Tungsten/Fluorescent/Darkness)5. File Quality: To select a file quality.(High/Normal/Economy)6. Shutter Sound: To select a shutter sound. (Shutter/Silent/Say “Cheez”/Ready! 123)7. Color Effects: To select a color effects. (Normal/Antique/Black & White/Negative)8. Display Icon: To select a icon “On” or “Off”.9. Fun Frame: Select your favorite fun picture frame todecorate your picture.10. Sub LCD: To taking picture with Sub LCD.By pressing [OPTIONS], you can choose Sub LCD options: 1. Main LCD/2. Self Timer/3. Flash/4. Shutter SoundUser can control brightness and zoom and flash directly bypressing up and down navigation key.Navigation Up / Down: Zoom up & down.Navigation Left / Right: Brightness up & down ( -2, -1, 0, +1, +2). MY PIX3Select picture with the Navigation Key, thenpress [VIEW]. You can see detail picture.2In Review Mode, you can view all the picturesyou have stored in your phone.In detail view, user can view previous or next picture by pressing left or right navigation key.By pressing [OPTIONS], you can choose from the following:1. Send: To send a picture message.2. To PIX Place: To uploading selected picture to pix server.3. Get New: To download a “New Pix” through the “Get It Now”. 4. Set As: Assigns the selected pix to display for specific tasks. (Wallpaper/Screensaver/Picture ID).5. Rename: To edit the picture’s title. 6. Lock/Unlock: To select “Lock” or “Unlock”. 7. Erase: Erase the current picture from your phone.8. Erase All: To erase all the pictures in your phone. 9. PIX Info: Displays information on the selected picture, such as name, date, time, resolution and file size.(“Send”, “To PIX Place”, “Set As”, “Rename”, Lock/Unlock”,Erase” functions applies only to downloaded contents.)Press [CAMERA] to return to Camera mode to take another picture.In Review Mode you can view all the pictures you have taken, storeselected images in your phone, send pictures to the Online Album,delete images and access additional picture options.1Press [MENU], then select “Get It now” menu,then press “Get PIX” or press or pressand hold side camera key, then select “MyPIX”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-45.png)
![CH591GET IT NOWCH590GET IT NOWGET FUN & GAMESDOWNLOADING NEW FUN & GAMES1Press [MENU], then select “Get It now” menuor press , then press “Get Fun & Games”then select “Get New”. (The BREW willlaunch and take you to the download menu.)3Use your navigation key to select a “Fun orGames” you wish to download, press [OK].2Use your navigation key to select a provider’sbrowser, press [OK]. PLAYING DOWNLOADED FUN & GAMES1Press [MENU], then select “Get It now” menuor press , then press “Get Fun & Games”.2To play downloaded fun or games.Select the fun or games you want to play, thenpress [PLAY].3To launch “BREW”.4After take the taken picture be displayed.To save the picture, press [SAVE].To go back to idle mode without saving thepicture, press . To take another picture without saving the pictureyou just took, press [ERASE].To send the picture to someone, press [SEND].Please refer to page 96 for more details on“New Pix Msg”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-46.png)
![VOICE MAIL, TXT, PIXMESSAGINGThis chapter addresses Voice Mail, TXT, Pix Messaging functionsincluding: WHEN A NEW MESSAGE ARRIVESVOICE MAILNEW MSGINBOXSENTDRAFTSE- MAILMOBILE IMCHATERASE ALLSETTINGSChapter 69392CH693GET IT NOWCH5GET GOINGCONNECTING GET GOING1Press [MENU], then select “Get It now” menuor press , then press “Get Going” thenselect “Get New”.2To launch “BREW”.GET NEWS & INFOCONNECTING NEWS & INFO1Press [MENU], then select “Get It now” menuor press , then press “Get News & Info”then select “Connect Web”.2Connect “WAP Browser”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-47.png)
![Displays the number of voice mails and accesses them by pressing .VOICE MAILCH695CH694WHEN A NEW MESSAGE ARRIVES NEW MSG1The following display appearswhen a new message arrives.2To display the message, select “View Now”,then press [OK].1Press [MENU], then select “Messaging”menu, press “New Msg”, then press“New Txt Msg” or press [MESSAGE], press“New Msg”, then press “New Txt Msg”.To send a new txt message:2Under “To”, input the phone number and press .3Under “Message”, input a new TXT message.By pressing [ADD], you can choose from the following:1. Contacts : Search the phone number which is stored in the contacts list.2. Groups : Search the group which is stored in the contacts list.3. Recent Calls : Search the phone number which is stored in the recent calls list.By pressing [OPTIONS], then select “ADD”. You can choose from the following:1. Graphics : Inserts simple graphic image in TXT Msg.2. Sounds : Inserts EMS sound in TXT Msg.3. Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols.)FIRST TIME USER1Dial *86 then press [SEND].2At the recording, press .3To set up your account follow the voice tutorial.EXISTING USER1Dial *86 then press [SEND].2At the recording, enter your 4 digit password,then press .3To listen to new messages, press .To field support max 10 contacts.If one of field is inserted in txt msg field, message save atdraft box.5To send the Txt message, press [SEND].4Press [OPTIONS], then select “Priority Level”,select “High” or “Normal”, then press [OK].To save the Txt message, press [OPTIONS], then select “Save As Drafts”.1Press [MENU], then select “Messaging”menu, press “Voice Mail” or press[MESSAGES], press “Voice Mail”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-48.png)
![NEW MSG NEW MSGCH697CH696To send a new pix message:2Under “To”, input the phone number and press .3Under “Text”, input a new TXT message thenpress .By pressing [ADD], you can choose from the following:1. Contacts : Search the phone number which is stored in the contacts list.2. Groups : Search the group which is stored in the contacts list.2. Recent Calls : Search the phone number which is stored in the recent calls list.3. To PIX Place : To send pictures by using online Address.By pressing [OPTIONS].Add Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols. Max 1000 characters support.)6Under “Subject”, input a subject then press .By pressing [OPTIONS].Add Quick Text : Inserts already written sentences in TXT Msg.(Please refer to page 31 for more details on entering letters,numbers and symbols. Max 100 characters support.)4Under “Picture”, user can insert only one pictureand be able to remove inserted picture. Press [GALLERY], then select the picture you’d like to send and press .To field support max 10 contacts.8To send the Pix message, press [SEND].7Press [OPTIONS], then select “Priority Level”,select “High” or “Normal”, then press [OK].To save the Pix message, press [OPTIONS], then select “Save As Drafts”.To preview a written picture message, press[OPTIONS], then select “Preview”.To add slide, press [OPTIONS], then select “Add Slide”.5Under “Sound”, user can insert only on soundand be able to remove inserted sound. Press [SOUND], then select the sound you’d like to send and press .1Press [MENU], then select “Messaging”menu, press “New Msg”, then press“New Pix Msg” or press [MESSAGE], press“New Msg”, then press “New Pix Msg”.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-49.png)
![INBOX INBOXCH699CH698SAVE GRAPHIC1To save a picture to the “Save Graphic” folder.ERASE1To erase this message, select “Erase”, thenselect “Yes”, press [OK].FORWARD1To forward the TXT or PIX message.2Input the phone number of the person you aresending the message, then press [OK].3Input any text message to go along with theforwarded message, then press [OK].PLAY AGAIN1To play a sound from a received pix message.The Inbox manages recevied TXT/PIX/WAP Push messages. To access:2Select a message, then press [OPEN]. The message is displayed. To delete a message,press [ERASE], press [OK].If you select WAP Push message, press [GET],to Browser launching.Press [OPTIONS].3REPLY W. COPY123To reply to a received message and include thereceived message into the message.The default call back number is automaticallyincluded into the Default CB# field. You can scroll to the number and edit it.To send the TXT or PIX message, press [OK].SAVE SOUND1To save a sound to the “Save Sound” folder.1Press [MENU], then select “Messaging”menu, press “Inbox” or press[MESSAGE], press “Inbox”.SAVE QUICK TEXT1Select to save received text msg to “Quick Text”.“Play Again", “Save Graphic", “Save Sound" menu appears onlywhen you receive a pix message or EMS message.: Lock: Priority: Read: Unread: EMS Unread: Pix Unread: Pix Read: MMS Push: Wap Push: EMS Read](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-50.png)
![INBOX SENTCH6101CH6100MESSAGE INFO1To show received pix message information.• “Message Info” menu appears only when you receive a pix message.• Place a call to a received message number by simply pressing .1Press [MENU], then select “Messaging”menu, press “Sent” or press [MESSAGE],press “Sent”.Manages sent TXT/PIX messages or messages waiting to be sent.2Select a message then press [OPEN]. The message is displayed. To delete a message,press [ERASE], press [OK].Press [OPTIONS].3FORWARD1To forward the TXT or PIX message.2Input the phone number of the person you aresending the message, then press [OK].3Input any text message to go along with theforwarded message, then press [OK].: Lock: Priority: Sent: Incomplete Delivery: Deliverd: Sent but Delievery FailedADD TO CONTACTS1Select to save number to contacts.LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .RESEND1To resend a TXT or PIX message.PLAY AGAIN1To play a sound from a received pix message.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-51.png)
![SENT DRAFTSCH6103CH6102SAVE QUICK TEXT1Select to save received text msg to “Quick Text”.ADD TO CONTACTS1Select to save number to contacts.ERASE1To erase this message, select “Erase”.LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .2Select “Yes” or “No”, then press .ADD TO CONTACTS1Select to save number to contacts.SEND1To send a selected message.LOCK/UNLOCK1To lock or unlock the TXT or PIX message.2Select “Lock” to lock the message or “Unlock”to unlock the message, then press .MESSAGE INFO1To show received pix message information.• “Message Info” menu appears only when you receive a pix message.• Place a call to a received message number by simply pressing .1Press [MENU], then select “Messaging”menu, press “Drafts” or press[MESSAGE], press “Drafts”.2Select a message then press [EDIT]. The message is displayed. To delete a message,press [ERASE], press [OK].Press [OPTIONS].3Draft Folder contains any draft messages or saved mes-sages.If message composition is interrupted by a voice call or otherinterrupting event, the text of the current composition is automaticallysaved in the drafts folder.: Lock: PIX Drafts: SMS/EMS Drafts](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-52.png)
![CH6105CH6104MOBILE IME- MAIL1Press [MENU], then select “Messaging”menu, press “E-mail” or press[MESSAGE], press “E-mail”.2Launch Browser.1Press [MENU], then select “Messaging”menu, press “Mobile IM” or press[MESSAGE], press “Mobile IM”.2Launch BREW.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-53.png)
![CH6107CH6106ERASE ALLCHAT22.1. To erase all the inbox messages, press [ERASE INBOX].3Select “Yes”, then press .2.2. To erase all the drafts messages, press [ERASE DRAFTS].2.3. To erase the sent messages, press [ERASE SENT].2.4. To erase the all message, press [ERASE ALL].1Press [MENU], then select “Messaging”menu, press “Chats” or press[MESSAGE], press “Chat”.1Press [MENU], then select “Messaging”menu, press [OPTIONS] or press[MESSAGE], press [OPTIONS].2Launch Browser.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-54.png)
![CH6109CH6108SETTINGSSETTINGSALL MSG SETTINGSPress [AUTO SAVE]. Select “On”, “Off” or “Prompt” with theNavigation Key.Press [OK].Manages messaging features through various features.Automatically erases inbox messages when new messages arrive.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.Press [AUTO ERASE]. Select “On” or “Off” with the Navigation Key.Press [OK].On : All sent messages saved in the Sent box.Off : All sent messages not saved in the Sent boxPrompt : “Yes”, “No” dialogue box displayed after sent message.On : Oldest message erased frm inbox automatically when message is full.Off : Oldest message not erased frm inbox automatically when message is full.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.To edit the Quick Text message you have saved:Press [QUICK TEXT].2.1. Select a message from the list. Press [OK].2.2. To add a new Quick Text message, press [OPTIONS] to select “Add New”. To edit the Quick Text message you have selected, press [OPTIONS] to select “Edit”, then enter text, press [SAVE].To erase the saved Quick Text message, press [ERASE].Pre-defined quick text as below.1. What’s up?/2. Let’s meet/3. Check this out!/4. Whachadoing?/5. Thanks/6. What do you think?/7. You’ve gotta be hereto enjoy this/8. Would you like to join me for a date tonight?/9. On my way/10. Yes/11. You’re the best!/12. Call mePress [VOICE MAIL#].Input a new voice call back number or editvoice call back number.Press [OK].AUTO SAVEQUICK TEXTVOICE MAIL#AUTO ERASE112332123123](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-55.png)
![CH6111CH6110SETTINGSSETTINGSCreate a signature that can be automatically inserted at the end of amessage.Press [SIGNATURE].To activate Signature function, put the cursoron Insert Signature then select “Custom” byusing right or left direction keys. To deactivateSignature function, select “None”.To input “Signature”, put the cursor on EditSignature.Press [OK].Edits a default callback number so that the recipient can callback orreply.Press [CALLBACK#]. Select “On” or “Off” with the Navigation Key.Select “On”, then input a callback number, press [OK].Press [ENTRY MODE].Select “T9Word”, “Abc”, “ABC”, “123” or“Symbols” with the Navigation Key.Press [OK].Sets an Entry Mode as a default. For example, if T9 Mode is thedefault, its icon will appear.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“All Msg”.ENTRY MODE SIGNATURECALLBACK #3321214321](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-56.png)
![CH6113CH6112SETTINGSSETTINGSTXT MSG SETTINGSPress [AUTO VIEW]. Select “On” or “Off” with the Navigation Key.Press [OK].If the “Auto View” is set to on, the user will be able to view themessage. If the “Auto View” is set to off, the user can view themessage by entering SMS Menu-> Inbox.On : Text message be displayed automatically.Off : User able to tetrieve the message from the inbox or based on user input from interactive notification.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“TXT Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“TXT Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“TXT Msg”.Press [OK].Press [BLOCK/UNBLOCK].Select “Block”, “Unblock” or “View List ofBlocked Addresses” with the Navigation Key.BLOCK : Enter the address to block.UNBLOCK : Enter the address to remove from block.VIEW LIST OF BLOCKED ADDRESSES : Display the blockedlist on LCD.Create a signature that can be automatically inserted at the end of amessage.Press [SIGNATURE].To activate Signature function, put the cursoron Insert Signature then select “Custom” byusing right or left direction keys. To deactivateSignature function, select “None”.To input “Signature”, put the cursor on EditSignature.Press [OK].AUTO VIEWSIGNATUEBLOCK / UNBLOCK3123211432](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-57.png)
![MEMOMOBILE WEB 2.0This chapter addresses Internet services and web browsing. For more detailed information contact your service provider.STARTING INTERNET BROWSERBROWSER MENUChapter 7115CH6CH7114PIX MSG SETTINGSPress [AUTO RECEIVE]. Select “On” or “Off” with the Navigation Key.Press [OK].On : Pix msg downloaded autoamatically.Off : User able to retrieve the message from the inbox or based on user input from interactive notification.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“PIX Msg”.Press [MENU], then select “Messaging”menu, press [SETTINGS] or press[MESSAGE], press [SETTINGS], press“PIX Msg”.Create a signature that can be automatically inserted at the end of amessage.Press [SIGNATURE].To activate Signature function, put the cursoron Insert Signature then select “Custom” byusing right or left direction keys. To deactivateSignature function, select “None”.To input “Signature”, put the cursor on EditSignature.Press [OK].SIGNATUEAUTO RECEIVE1231234](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-58.png)
![BROWSER MENUSTARTING INTERNET BROWSER BROWSER MENUCH7117CH7116BACK1To return to the previous page.Press , then press [MENU] . LAUNCHING MOBILE WEB 2.01To start your Internet browser and accesswebsites through your wireless handset press . VZW HOME1To display the homepage. Press , then press [MENU] . ADDRESS1To select “Address”.Press , then press [MENU] .REFRESH1To select “Refresh”.Press , then press [MENU] . The browser menu lists the actions necessary to operate the browser.press , then press [MENU].When the “VZW Home” item is selected from the Browser Menu, the phone displays the homepage.When the “Back” item is selected from the Browser Menu, the phonedisplays the previous page in the history. Now you can access news, sports, weather, and e-mail from yourphone. Mobile Web 2.0 keeps you updated by providing access to up-to-date information such as news, sports, weather and stockquotes when you subscribe to Internet service with your serviceprovider. Please contact your service provider for a list of availablewebsites and service details.Selecting the “Address” item from the Browser Menu displays theURL of the current page.The user may clear cache, history, cookies and auto fill from thememory.Selecting the “Refresh” item from the Browser Menu refreshes thecurrent page.The history list is available from the Browser Menu and the user maydelete all items from the history. When the “Forward” item is selected from the Browser Menu, thephone displays the next page in the history. This is only available if theuser has navigated backward in the history. HISTORY1To select “History”.Press , then press [MENU] . FORWARD1To forward to the next page.Press , then press [MENU] . CLEAR MEMORY1To clear browser memory.Press , then press [MENU] .](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-59.png)
![BROWSER MENU BROWSER MENUCH7119CH7118SETTINGS1To select “Settings”.Press , then press [MENU] . Downloads : Selecting the “Downloads” item allows the user toenable/disable downloading images, background sounds, and object downloads when a URL is accessed.Restart Browser : Selecting “Restart Browser” causes the history and cache to be cleared and returns the user to the homepage.Scroll Mode : Selecting the “Scroll Mode” item is selected fromthe Settings menu allows the user to select between time-square scrolling (referred to as block scrolling) and smooth scrolling and to select the speed of the smooth scrolling. Scrolling speed choices are medium, fast, and slow. Send Referrer : When the “Send Referrer” item is selected from the Settings menu, the browser allows the user to turn on or off sending the referrer URL. Key Press Timeout : When the “Key Press Timeout” item is selected from the Settings menu, the browser allows the user to set the key press timeout as fast, medium or slow. Medium is 1.5 seconds, slow 2 seconds and fast is 1 second. The key press timeout is the period of time after which the cursor auto-advances to the next entry position. In most cases, a single key can be used to enter more than one character. Each time the key is pressed the last character of the line is replaced by the next choice for that key. As long as the same key is re-pressed within key press timeout, the last character cycles between all the choices for the key. Connection Timeout : When the Connection Timeout item is selected from the Settings menu, the browser allows the user to set the connection timeout. The connection timeout determines how long the browser will wait for a response from the network for a network request.ADVANCED1To select “Advanced”.Press , then press [MENU] .Selecting the “Advanced” item in the Browser Menu displays theadvanced menu items.About... : When the “About” item is selected information about the browser version, copyright information and certificate information is displayed. Encryption : Selecting the “Encryption” item from the Advanced Menu enable the user access to Encryption features of the browser.1. Authentication : The “Authentication” item in the Encryption menu allows the user to toggle authentication caching. 2. Root Certificate : The “Root Certificate” item in the Encryption menu allows the user to view the list of certificates.3. Current Certificate : The “Current Certificate” item in the Encryption menu allows the user to view the current certificate. This is only available if a secure connection is established.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-60.png)
![BROWSER MENUSAFETY ANDWARRANTYThis chapter addresses the safety guidelines and precautions tofollow when operating your phone. Before operating your phone,please be aware of all the safety details.This chapter contains the terms and conditions of services and thewarranty for your phone. Please review them thoroughly. SAFETY INFORMATION FOR WIRELESS HANDHELD PHONESSAFETY INFORMATION FOR FCC RF EXPOSURESAR INFORMATIONFCC Hearing-Aid Compatibility (HAC) Regulations for Wireless DevicesFDA CONSUMER UPDATEPROTECT YOUR WARRANTY12 MONTH LIMITED WARRANTYChapter 8121CH7CH8120To exit browser.Press , then press [MENU] . EXIT1When the “Exit” item is selected from the Browser Menu, the user exitsout of the browser and is returned to the phone idle mode.](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-61.png)
![131130CH8CH8On July 10, 2003, the U.S. Federal Communications Commission(FCC) Report and Order in WT Docket 01-309 modified the exception ofwireless phones under the Hearing Aid Compatibility Act of 1988 (HACAct) to require digital wireless phones be compatible with hearing-aids.The intent of the HAC Act is to ensure reasonable access totelecommunications services for persons with hearing disabilities. While some wireless phones are used near some hearing devices(hearing aids and cochlear implants), users may detect a buzzing,humming, or whining noise. Some hearing devices are more immunethan others to this interference noise, and phones also vary in theamount of interference they generate.The wireless telephone industry has developed a rating system forwireless phones, to assist hearing device users find phones that may becompatible with their hearing devices. Not all phones have been rated.Phones that are rated have the rating on their box or a label located onthe box. The ratings are not guarantees. Results will vary depending on theuser’s hearing device and hearing loss. If your hearing device happensto be vulnerable to interference, you may not be able to use a ratedphone successfully. Trying out the phone with your hearing device isthe best way to evaluate it for your personal needs.M-Ratings: Phones rated M3 or M4 meet FCC requirements and arelikely to generate less interference to hearing devices than phones thatare not labeled. M4 is the better/higher of the two ratings.Hearing devices may also be rated. Your hearing device manufactureror hearing health professional may help you find this rating. Higherratings mean that the hearing device is relatively immune to interferencenoise. The hearing aid and wireless phone rating values are then addedtogether. A sum of 5 is considered acceptable for normal use. A sum of6 is considered for best use. In the above example, if a hearing aid meets the M2 level rating and thewireless phone meets the M3 level rating, the sum of the two valuesequal M5. This should provide the hearing aid user with “normal usage”while using their hearing aid with the particular wireless phone. “Normalusage” in this context is defined as a signal quality that is acceptablefor normal operation. The M mark is intended to be synonymous with the U mark. The T markis intended to be synonymous with the UT mark. The M and T marksare recommended by the Alliance for Telecommunications IndustriesSolutions (ATIS). The U and UT marks are referenced in Section 20.19of the FCC Rules. The HAC rating and measurement procedure aredescribed in the American National Standards Institute (ANSI) C63.19standard.For information about hearing aids and digital wireless phonelFcc Hearing Aid Compatibility and Volume Controlhttp://www.fcc.gov/cgb/dro/hearing.htmllGallaudet University, RERChttp://tap.gallaudet.edu/DigWireless.KS/DigWireless.htmlSelf Help for Hard of Hearing People Inc. [SHHH]www.hearinglpss.org/hat/TipsWirelessPhone.htmlThe Hearing Aid Compatibility FCC Orderhttp://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-168A1.pdfFCC HEARING-AID COMPATIBILITY (HAC)REGULATIONS FOR WIRELESS DEVICES FCC HEARING-AID COMPATIBILITY (HAC)REGULATIONS FOR WIRELESS DEVICES](https://usermanual.wiki/Pantech/TX-215.Users-Manual/User-Guide-552458-Page-66.png)
