Pantech X1 Single-Band CDMA PCS Phone with Bluetooth User Manual BT Manual
Pantech Co., Ltd. Single-Band CDMA PCS Phone with Bluetooth BT Manual
Pantech >
Contents
- 1. Users Manual
- 2. Manual
- 3. BT Manual
BT Manual
Turn Bluetooth on and off
By default Bluetooth is turned off. If you turn it on, and then turn off your device,
Bluetooth also turns off. When you turn on your device again, Bluetooth turns on
automatically.
1. On the main screen, click Menu > Tools & Settings > Bluetooth.
2. If Select Turn Bluetooth on when the Bluetooth is power off then the Bluetooth is power
on.
Create a Bluetooth partnership
Ensure that the two devices are within close range and that both Bluetooth-enabled
devices are discoverable.
1. On the main screen, click menu > Tools & Settings > Bluetooth >Turn Bluetooth on.
2-1. If you want to find headset Bluetooth or handsfree Bluetooth, then Click Add Device >
Headset. Your phone searches for other Bluetooth-enabled headset-devices and handsfree-
devices displays them in the list.
2-2. If you want to find other Bluetooth Devices, then Click Add Device > Devices.
Your phone searches for other Bluetooth-enabled devices and devices displays them in the
list.
3. Select the device with which you want to create a Bluetooth partnership, and
click Pair.
4. In Pinkey, if you want to use a passkey (recommended for enhanced security),
enter a alphanumeric passkey between 1 and 16 characters, and click Done.
Otherwise, leave the passkey blank, and click OK.
5. Enter the same passkey on the other device.
6. Paired the device move to Trusted Devices folder. If paired Bluetooth device is other
Bluetooth Device then Select the device with which you want to create a Bluetooth
partnership, and click Connect.
Tip
Once you create a partnership, the Bluetooth-enabled devices don't need to be
discoverable to beam information between them; Bluetooth needs only to be turned on.
Note
If the headset becomes disconnected, turn the headset on and repeat steps 1-6 above.
End a Bluetooth partnership
1. On the main screen, click Menu > Tools & Settings > Bluetooth > Trusted Devices
2. select the Bluetooth device you want to end Click Disconnect.
Note
If Select the Bluetooth partnership you want to delete then Click Trusted Devices > select
the Bluetooth devices you want to delete Menu > Delete.
Make your device discoverable
To receive beamed information, beaming devices or computers must be able to detect
your device.
1. On the main screen, click Menu > Tools & Settings > Bluetooth .
2. Click menu > Discoverable
3. select the Discoverable mode you want to choose.
Other Bluetooth-enabled devices can now detect your phone and attempt to beam
information to it, establish a Bluetooth partnership, or use a Bluetooth service.
Notes
Rename a Bluetooth partnership
You can give a more meaningful name to a Bluetooth partnership to help you recognize
it when selecting from a list of partnerships.
1. On the Home screen, click Menu > Tools & Settings > Bluetooth.
2. Select the Bluetooth partnership to rename.
3. Click Menu > Rename.
4. In Device Name, enter a new name for the Bluetooth partnership, and click Save.
Note
If the headset becomes disconnected, turn the headset on and repeat steps 1-4 above.
Delete a Bluetooth partnership
You can delete paired Bluetooth device you want to delete.
1. On the Home screen, click Menu > Tools & Settings > Bluetooth > Trusted Devices.
2. move the Bluetooth device you want to delete click Menu > Delete
Delete all Bluetooth partnership
You can delete paired Bluetooth device you want to delete.
1. On the Home screen, click Menu > Tools & Settings > Bluetooth > Trusted Devices.
2. move the Bluetooth device you want to delete click Menu > Delete all.
Send File Bluetooth partnership
You can send file to other Bluetooth device you want to transfer file
1. On the main screen, click Menu > Tools & Settings > Bluetooth > Send + Receive.
2-1. Click Send Photos > check > Send.
2-2. Click Videos > check > Send.
Note
Send Mode is connected receiving Bluetooth device
Receive File Bluetooth partnership
You can receive file from other device to Bluetooth device you want to receive file.
1. On the main screen, click Menu > Tools & Settings > Bluetooth > Send + Receive.
2. Click Receive Mode.
Note
Receive Mode is connected sending Bluetooth device