Paoluy Silicone Technology SM9001 iphone Dual sim Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2952675
Application ID	yIjhWnQKjvKHyrvGRYvZ2A==
Document Description	15_SM9001 UserMan, r1.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.47kB (868331 bits)
Date Submitted	2016-04-07 00:00:00
Date Available	2016-04-07 00:00:00
Creation Date	2016-03-28 13:23:26
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-03-28 13:24:13
Document Title	User Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Specifications
26*$,
45"35
(6*%&
MTK
Frequency
850MHZ \ 900MHZ \ 1800MHZ \ 1900MHZ
Bluetooth
4.0
Battery
Lithium ion Battery Capacity
500mAh
Working Time
4.5 Hours
Standby Time
100~120 Hours
Selfie
Support
Charging Duration 2.5 Hours
Weight
Dual SimCard for iPhone
SM-9001
1.Turn on ‘Bluetooth’ with your iPhone from “Setting”
CPU Brand
Safeguard
Connect the device with your iPhone\iPad&iPod Tuch
3. Insert the card pocket back the device.
SIM Card
Camera button
Charge Prot
SIM Card
On/Off Switch
LED
buzzer
Button
On/Off Switch: Press the button for 4S to turn on the device,press
the button for 3S will turn off the device,RED LED light will be shut
off after 7 seconds.
Button for Selfie: Turn on the camera with APP opened, press selfie
button take selfie.
Instal the SIM card
1. Take out card pocket with a pin.
The Company reserves the final interpretation of this quick start guide,APP is
subject to upgrade without further notice.
APP function updated in APP setting options in the User's Guide Learn.
Troubleshooting:
1, the phone will not work with the device:
Please check the Bluetooth on the phone is turned on;
Please check the device is turned on;
Please check the device is on pairing status, has not connected with
other phones.
2, Phone has connected with device but there’s no network signal:
Check that theSIM card is valid and properly installed;
Turn the device off, remove the SIM card reload, and then turn it on;
3, Can not take selfie photo:
Make sure the distance between your phone and device is within 10
meters;Please turn on the camera in the APP.
4, The distance between your phone and device is more than 10 meters,
but they don’t send alarm:
Select "More Settings" and turn on the alarm.
5, Can not charge the device:
Check the power adapter is properly plugged into an electrical outlet;
Replace the power adapter;
Check the charging cable is properly inserted, or replace charging cable.
Safety Caution
This safety caution contains content applies to the mobile devices. Some
may not apply to your device, in order to protect you and others from harm,
or to protect your equipment from damage, please read the safety caution
before using the device.
Do not use a damaged power cord or plug;
Insecure connection can cause electric shock or fire;
Do not touch the power cord with wet hands, or by pulling on the cord
charger allocated under way;
Doing so may cause an electric shock death;
Do not bend or damage the power cord;
Doing so may cause an electric shock or fire;
Do not use or touch equipment with wet hands while charging;
Doing so may cause an electrical shock;
Avoid short circuit;
Doing so may cause electric shock or fire, battery may failure or explosion;
Do not use the device outdoors during thunderstorms;
Doing so may cause electric shock or equipment failure;
Do not replace the battery;
Otherwise it will cause damage to the equipment;
Do not drop the device.
Handling Device:
Do not place the device in a fire, do not place the device on heating
equipment (such as microwave ovens, oven or radiator) near or inside the
equipment from overheating could cause the battery to explode.
Do not crush or puncture the device;
Do not allow the device to external high pressure, it may cause an
internal short circuit and overheating;
Do not use your device in the case may be affected by radio frequency
interference like hospital, plane or car, etc.
Do not use the device at a refueling;
Do not use the device in the vicinity of the device or instrument;
emitting radio frequencies;
Radio frequency may cause the device to malfunction;
This device is electromagnetic radiation Specific Absorption Rate (SAR)
maximum of 1.216W / kg,
conform to the national standard GB 21288-2007
Micro
iPhone and Compatible with iPhone\iPad\
Valuables
iPod Tuch
32g
Size
85.0*54.0*4.0mm
Product overview
3.Camera setting:
Open camera, you could
selfie With the “Camera
button” within 10 Meters.
2.Dial the number in your
contacts:
Open More Card, select
the The contact and dial.
Charge the battery
You need charge the battery if you used the device first time
or have not used it for long time,
You will turn on the device when charging, the LED will
indicate red during charging, will change to green when
charging completed,
Check the battery status
(Charging the device will automatically turn it on when it’s off),
indicator light is red when it’s charging, it turns to green when it’s
fully charged.
Check and send message
2.The device will enter “Bluetooth Search Mode”.
3. Open More Card APP( More Card will request to access
your MicPhone and contact when you use it for the first time,
please press “Allow” ),click “setting” then “Searching device”,
when your iPhone was found in the list, click “Connect”.
Open More Card:
You could find the messages
You received,Press write icon
at top right Corner,
You
could edit and write a message.
4.Language setting:
Only English and Chinese
Available, other languages
will Be updated.
Selfie
1, When device connected with iPhone, iPad or iPod Touch, and
with APP opened, press selfie button to turn on the camera,
press again to take selfie.
2, Open the More Card APP, turn on the camera manually, press
the selfie button to take selfie.
APP Setting
5. More configurations:
you could also set alert
when lost, beep accessory,
battery in percentage and
Bluetooth Selfie/Answer/
hang up.
1.Sound setting:
you could set the sound and
vibration patterns.
Search your Phones
When device connected with iPhone, iPad or iPod Touch and
with More Card APP opened, press the selfie button for 3 seconds
and then release, the phone will rings twice, repeat the process till
find the phone.
Alarm
When device connected with iPhone, iPad or iPod Touch and
with More Card APP opened, if the distance between phone and
the device over 10 meters, the phone will ring for 4 times and the
device will ring for 100 seconds to remind you. This function can
be shut in the settings.
How to use the device
Install More Card:
Search and install “More Card”
from App Store.
Install
“More Card”
APP
Make a call
6. Message reply:
You could send message
When you are not available
for a call.
2. Privacy Setting:
you could set gesture lock,
SMS reply and blacklist.
1.Dial direclty :
Open More Card,
you could dial the num
ber from the keyboard
directly.
2. Install the SIM into the groove.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:03:28 13:24:13+08:00
Create Date                     : 2016:03:28 13:23:26+08:00
Metadata Date                   : 2016:03:28 13:24:13+08:00
Format                          : application/pdf
Title                           : User Manual.pdf
Creator                         : Administrator
Document ID                     : uuid:5ea9ba94-3e64-48a9-a4bb-ca8fe7f5ec27
Instance ID                     : uuid:aa2078cb-b91a-4d22-95ec-e995686db1d2
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools