Paradox Security Systems SR130 Outdoor Wireless Siren User Manual SR130 Wireless Siren EQ01 11x8 5 2

Download:
Mirror Download [FCC.gov]
Document ID	2497988
Application ID	a3te4kae0F2Rs4MQwPKcEg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.54kB (94303 bits)
Date Submitted	2015-01-13 00:00:00
Date Available	2015-07-13 00:00:00
Creation Date	2014-06-19 13:19:16
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2015-01-04 09:00:41
Document Title	SR130 Wireless Siren EQ01 11x8.5 (2).fm
Document Creator	FrameMaker 12.0.3

SR120 Outdoor
Programming
The following provides instructions on how to program your siren via a keypad or by using BabyWare. For
more details on how to program, please refer to the MG/SP Programming Guide.
SR130: Outdoor Wireless Siren w/Built-In Strobe Light
To Program Using a Keypad
MG6250
MG/SP
Feature
Details
[0801]
[0802]
[0803]
[0804]
[683]
[684]
[685]
[686]
Learn Siren #1
Learn Siren #2
Learn Siren #3
Learn Siren #4
[0801]
[687]
[0802]
[688]
[0803]
[689]
[0804]
[690]
[0811]
[0812]
[0813]
[0814]
[0800]
[691]
[692]
[693]
[694]
[695]
[0820]
[587]
Option [1]
Option [3]
Option [2]
Option [4]
Option [3]
Option [5]
Option [4]
Option [6]
Display Signal
Strength Siren #1
Display Signal
Strength Siren #2
Display Signal
Strength Siren #3
Display Signal
Strength Siren #4
Label Siren #1
Label Siren #2
Label Siren #3
Label Siren #4
Temporary
Tamper Switch
Deactivation for
Maintenance
Panel
Supervision of
Siren
Siren #1 (OFF/
ON)
Siren #2 (OFF/
ON)
Siren #3 (OFF/
ON)
Siren #4 (OFF/
ON)
Press and hold “Reset/Training” switch for 3 seconds
after entering the section to learn the siren.
WARNING: When you press the "Reset/Training"
switch, the SR130 will squawk and the strobe light
will flash five times to confirm registration to the
panel.
Press and hold "Reset/Training" switch for 3 seconds
after entering the section to display, on a K32LCD
V1.3 or higher, the signal strength the panel is
receiving from the siren.
Version 1.0
Printed in Canada
These labels are used when reporting events via
e-mail through the IP100/ IP150 (MG/SP only) or
SMS personal reporting (MG6250 only) and for
troubleshooting purposes. Maximum 16 characters.
Press the [enter] key after entering the section to
deactivate tamper alarm
until the cover is
DESIGN
reinstalled or after 30 minutes.
OFF = disabled
ON = enabled (default)
The control panel supervises the presence of the
SR130. If lost, the control panel will follow global
supervision loss option set in the panel.
To Program Using BabyWare
1.
2.
3.
4.
Open BabyWare and connected to your system.
Go to BabyWare => Add Item => Wireless Sirens.
Fill-in the label, location, and serial number of the SR130.
Click Save.
Certifications
EN50131-4 Grade 2, Type W
Certification
Body:
Applica Test and Certification
SR130-EI00
EN 50130-5 Class IV
12/2014
Description
The SR130 is a stand-alone, fully supervised outdoor wireless siren with built-in strobe light and wireless
transceiver. With normal use, the SR130 will function up to three years without the need to replace the
batteries. The SR130 uses 2-way wireless communication, which provides continuous supervision between
the panel and siren with fast response to alarm signals within 4 seconds.The SR130 operates using three
size “C” alkaline batteries.
Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Siren (100dB or more) *
Wall tamper switch and cover tamper
switch
Reset/Training switch
Tamper Switch connector
Battery pack (3 size “C” alkaline batteries)
Strobe lights
In-Field connector
Signal Strength and transmission LED
Antenna
Status LED
Mounting screw
Captive screw
* Warning! High Voltage. Remove batteries
before maintenance
Figure 1:ISR130 Back cover
LED Feedback
Signal strength/RF
transmission LED
Status LED
Tamper Supervision
Red blinking - sending data
Green blinking - receiving data
Amber flash 4x - strong signal
Amber flash 3x - good signal
Amber flash 2x - weak signal
Amber flash 1x - very weak signal (relocate)
No flash - no signal
Red steady on - powered/normal operation Red slow blink - low battery
Installation
1.
2.
3.
4.
5.
Write down the serial number (on the back of the unit) and location of the SR130 for later reference,
to insert into BabyWare.
Unlock the top cover by turning the captive screw.
Remove the top cover from the siren.
Mount the SR130 siren to the wall using the mounting screws.
Make sure the Anti-Tamper switch is screwed into the wall.
Siren with Batteries
If a tamper is detected, the SR130 sounds an alarm and the strobe light flashes for 4 minutes. The control
panel follows the global supervision options set in the panel.
Specifications
Power
4.5VDC (3 size “C” alkaline batteries)
Battery life
Up to 3 years based on normal use (e.g., 2 alarms per year with strobe for
2.5 hours and 8 squawks per day at an average of 25ºC (77ºF) with default
alarm time set to 4 minutes. If the alarm is set for more than 4 minutes, the
battery life may be reduced).
Current Consumption:
Standby: 5.75μA
Maximum: 450mA
Battery Low Voltage
signal
Will be sent at 4.1 VDC
(This product requires 3 –1.5V batteries total nominal voltage 4.5VDC)
* RF frequency
433MHz or 868MHz
Siren
100dB or more (1 meter)
Acoustic output type: Tone
Dimensions
13.43cm X 21.17cm X 5.11cm (5.29in X 8.34in X 2.01in)
Weight
567g (20 oz.) with batteries, 365g (12.87oz.) without
Humidity Range
5% to 93%
Operating Temperature
-25ºC to 70ºC (-13ºF to 158ºF)
RF range
Up to 70m (230 ft)
* Only 433 MHz version is approved for FCC and IC
Compatibility
Figure 2:Remove the Cover
If your siren already has batteries installed you need to:
A Remove the plastic tab between the top battery terminals and the battery compartment.
B Leave the covers off until you train the siren.
MG/SP series v4.0 or higher (except SP4000)
K32LCD v1.3 or higher
MG6250 v3.0 and higher
K32LCD+ v1.0 or higher
RTX3 v1.5 or higher
K32LX v1.0 or higher
Siren without Batteries
BabyWare v2.8 or higher
In-Field Upgrade Software v3.8 or higher
K32+ v1.0 or higher
For latest updates visit paradox.com
If your siren does not come with the batteries then:
A Insert the batteries. Make sure to place with the proper polarity.
B Leave the covers off until you train the siren.
6.
Reinstall the PCB cover.
7.
Reinstall the siren cover and lock.
Upgrading Firmware
The SR130 firmware can be upgraded through In-Field (V3.0 or higher) using the 307USB Direct Connect
Interface.
Notes: a. The SR130 needs the batteries installed to upgrade the firmware.
1.
2.
3.
b. Ensure that the SR130 Wireless Siren is awake before beginning the firmware upgrade. To
wake up the siren, press the training/reset switch. The siren will provide you with a 60 second
delay in order to begin the update.
Remove the front cover see Figure 2.
Connect the 307USB to the In-Field connector (connector #8 in Figure 1).
Refer to the firmware upgrade instructions found at: www.paradox.com
=>Software => In-Field Firmware Upgrade Instructions.
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and with Industry Canada license exempt RSS standard(s). Operation is subject to two conditions:
1.This device may not cause harmful interference
2.This device must accept any interference that may be received or that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
1.l'appareil ne doit pas produire de brouillage, et
2.l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
FCC ID: KDYSR130
IC: 2438A-SR130
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Paradox Security Systems Ltd.) could void the user’s
authority to operate the equipment.
Warranty
For complete warranty information on this product, please refer to the Limited Warranty Statement found on the website www.paradox.com/terms. The terms
and conditions are subject to change without notice, from time to time, at Paradox’s sole discretion. We invite you to visit our website on a regular basis for the
latest Limited Warranty Statement. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions. Please ensure that your use of
the Paradox product is in compliance with local, national, and international laws.
© 2014 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. US, Canadian and international patents may apply.
BabyWare and Paradox are a trademarks or registered trademarks of Paradox Security Systems (Bahamas) Ltd. or its affiliates in Canada, the United States and/or
other countries.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2014:06:19 13:19:16Z
Modify Date                     : 2015:01:04 09:00:41+02:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Creator Tool                    : FrameMaker 12.0.3
Metadata Date                   : 2015:01:04 09:00:41+02:00
Format                          : application/pdf
Title                           : SR130 Wireless Siren EQ01 11x8.5 (2).fm
Creator                         : 
Document ID                     : uuid:97214e1a-7665-46bc-8365-3e907e28a787
Instance ID                     : uuid:c72fba3f-c496-4436-8205-a83b5dbee845
Page Mode                       : UseOutlines
Page Count                      : 2

EXIF Metadata provided by EXIF.tools