Park Air Systems B6100-S2 VHF fixed ground based aeronautical receiver User Manual v6 T6T T6R 4pp datasheet

Park Air Systems Limited VHF fixed ground based aeronautical receiver v6 T6T T6R 4pp datasheet

Contents

Brochure

PAET6 SeriesPAE T6T TRANSMITTER and T6R RECEIVER, VHF Multimode Digital Radio (MDR)•VHF 118 to 137 MHz Multimode Digital Radio (MDR)•8.33 kHz and 25 kHz channel spacing•50 W RF transmit output power•Digital Coherent Mute (DCM) technology•Five-offset carrier capability•Analogue and digital operation•Extensive remote control facilitiesTECHNICAL INFORMATIONPAE T6T TRANSMITTER and T6R RECEIVER, VHF Multimode Digital Radio (MDR)A subsidiary of Northrop Grumman CorporationPark Air Systems Ltd, Northfields, Market Deeping, Peterborough, England, PE6 8UETel: +44 1778 345434  Fax: +44 1778 342877  Email: sales@parkairsystems.comwww.parkairsystems.comThe PAE T6T Transmitter and T6R Receiverfor advanced airspace communicationsGENERAL - T6T and T6RFrequency range 118 to 136.975 MHzChannel spacing: AM-voice 8.33 kHz and 25 kHzAM data  25 kHzModes: A3E AM-voiceOptions AM-MSKVDL-2VDL-3Mode memory slots 4Supported standards ICAO Annex 10EN 301 841-1EN 300 676Frequency stability: <1 ppmOption 1 <0.3 ppm (T6T only)Ref oscillator adjust From front panel rotary encoderDuty cycle 100% continuous transmitOperating temperature -20 to +55˚CStorage temperature -30 to +70˚CPower consumption: ac dcT6T - transmit 330 VA 10 AT6T - standby 20 VA 0.4 AT6R - receive 35 VA 1 AT6R - standby  20 VA 0.4 ASupplies:ac T6T: 110/120/220/230/240 V (±10%)48 to 62 HzT6R: 99 to 264 V 48 to 62 Hzdc  21.6 to 32 VCONTROL - T6T and T6RFull control and monitoring of the T6T and T6R can be carried out locally using the front panel controls and display, from a computer connected to the front panel, or remotely via a RS422 serial port from PAE MARC or similar.Pre-set channels 100Channel settings Frequency, channel spacing, memory assignment, frequency offsetFront panel lock out Prevents unauthorised adjustmentLocal control facilities Rotary encoder and backlit multifunctiondisplay provide menu driven control of allradio operating parameters and BIT functionsLED indicators for standby, ready, alarm, receive (on T6R) and transmit (on T6T)Mic/headset/diagnostic port for local operation and programming from computer via RS232 serial linkCoaxial connector for monitoring reference oscillator frequencyRemote control ports:Facilities Audio and control for AM operationMARC  RS422 serial port for control of radio from MARC or other compatible systemHDLC  Serial interface for VDL operationTRANSMIT  - T6TCarrier power 5 to 50 W in 1 W stepsModulation   0 to 100% in 1% stepsVSWR mismatch Full power into VSWR of 2.5:1Infinite VSWR without damageOffset carrier:2-offset carrier ±5 kHz3-offset carrier  fc and ±7.3 kHz4-offset carrier  ±2.5 kHz and ±7.5 kHz5-offset carrier  fc, ±4 kHz and ±8 kHz  (Option 1 only)Oscillator detect  Monitors installed oscillator. Inhibits offsetprogramming if invalid oscillator fittedHarmonic outputs <-36 dBmSpurious outputs <-46 dBmVOGAD <10% change in modulation depth for 30 dB change in input levelTx mute 5 dB below VOGAD thresholdTime out Off, or 2 s to 510 s in 2 s stepsAudio distortion <5% THDAudio bandwidth:8.33 kHz 350 Hz to 2500 Hz25 kHz 300 Hz to 3400 HzAudio interface:Line input -40 dBm to 0 dBm in 1 dB stepsTape output -10 dBmRECEIVE - T6RSensitivity -107 dBm for 10 dB (S+N)/NSelectivity:8.33 kHz <6 dB at ±3.5 kHz>70 dB at ±8.33 kHz>80 dB at ±25 kHz25 kHz <6 dB at ±11 kHz>80 dB at ±25 kHzSquelch Threshold adjustable in 1 dB steps for RF input levels from -114 dBm to -60 dBm [equivalent to <6 to >30 dB (S+N)/N]. Incorporates Digital CoherentMute (DCM) technology to dynamicallyfilter on-channel interference. DCMautomatically mitigates co-locationinterference to ensure the squelch openswhenever an input signal exceeds the setthreshold and has a positive (S+N)/N ratioAGC RF <3 dB change in audio output for RF signals between -107 dBm and +10 dBmAGC audio <1 dB change in audio output for modulation depth change between 90% and 30%. Automatically maintains audio at the 90% modulation equivalent level for maximum fidelityAntenna radiation  <-73 dBmAudio distortion <5% THDAudio bandwidth:8.33 kHz 350 Hz to 2500 Hz25 kHz 300 Hz to 3400 HzAudio interface:Line output -30 dBm to +10 dBm in 1 dB stepsLoudspeaker 1 WTape output -10 dBm MECHANICAL - T6T and T6RDimensions T6T: 89(H) x 483(W) x 450(D) mmT6R: 89(H) x 483(W) x 430(D) mmWeight  T6T: 17 kgT6R: 6 kgRF connectors N-type socketORDERING INFORMATION - T6T and T6RT6T transmitter: Part No. B6350Option 1 (high stab oscillator) Part No. B6350OPT1T6R receiver Part No. B6100T6T transmitter user guide Part No. 31-360000TXT6R receiver user guide Part No. 31-360000RXMicrophone Part No. 24-11030301Headset Part No. 24-12002801End-fed dipole antenna Part No. B2080Park Air Systems reserves the right to amend specifications in the light of continuing development - 012-1
PAE T6T TRANSMITTER and T6R RECEIVER, VHF Multimode Digital Radio (MDR)PAE T6 SeriesThe PAE T6T Transmitter and T6R Receiverfor advanced airspace communicationsThe PAE T6T and T6R multimode digitalradios are designed to provide ground-to-aircommunications for professional applications in airport and en route centres. The radioswill support both voice and ICAO defineddata modes.The T6 series incorporates 8.33 kHz and 25 kHz channel spacing. The radios recognizefrequencies entered in ICAO format andautomatically adjust to the correct channelspacing. For multichannel operation, anycombination of 8.33 kHz and 25 kHz channelspacing can be programmed. A 100 channelmemory allows immediate recall of storedfrequencies. Front panel operation can be‘locked’ to prevent unauthorised adjustmentof radio parameters.The T6T supports ICAO defined offset carrieroperation. The standard master oscillatorsupports two, three and four-offset carrieroperation, the optional high stability oscillatoralso allows five-offset carrier operation. Theradio detects the oscillator fitted and will inhibitfive-offset carrier operation if the high stabilityoption is not detected.Careful implementation of DSP techniquessignificantly reduces the component count withinthe radios. This leads to increased reliability andreduced logistic costs. All modulation anddemodulation processes are carried out usingDSP algorithms that provide consistent long-termperformance to further enhance equipmentreliability. All adjustable parameters within theradios can be modified using the front panelcontrols, or from a computer connected to theheadset/diagnostics port, eliminating the need toremove equipment covers during the operationallife of the radio. The radios can be operated locally using the frontpanel controls, or remotely via flexible controlinterfaces. STANDBY mode allows the radios to bepowered on and off remotely to ensure minimalcurrent drain on local power supplies.The use of innovative RF engineering alliedto sophisticated DSP technology providesclass leading performance. The advanceddesign of the T6 series transmitter and receiverallows operation in demanding co-site conditions,reducing the need for external filters. The T6Ttransmitter employs a sophisticated feedbacktechnique that minimizes spectral noise andenhances signal purity. The power amplifier isdesigned for optimum performance and maximumreliability and will support continuous operation applications.The T6R receiver circuitry benefits fromunique DSP implemented Digital CoherentMute (DCM) technology. DCM uses speciallydeveloped algorithms that monitor on-channelactivity and dynamically filter unwanted interferingsignals. The receiver front-end has exceptionalsignal handling properties that ensure rejectionof unwanted off-channel signals while maintainingexcellent low level wanted signal performance.  Comprehensive Built-In Test (BIT) monitorsboth static and dynamic parameters. Resultscan be viewed on the front panel LCD andsummarized via READY and ALARM indicators. AllBIT data is available for remote monitoring via serialports, and transmitters and receivers can be readilynetworked for remote monitoring using the PAEMulti-Access Remote Control (MARC) or similarsystems.

Navigation menu