Partner Tech MP300BT Mobile Printer User Manual LK P35B MANUAL 0910 indd

Download:
Mirror Download [FCC.gov]
Document ID	1035368
Application ID	KlURtU5BigFDfQtGZBq8Xg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.64kB (970439 bits)
Date Submitted	2008-11-25 00:00:00
Date Available	2008-11-25 00:00:00
Creation Date	2008-09-10 09:10:19
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2008-10-27 13:20:17
Document Title	LK-P35B MANUAL 영문 0910.indd
Document Creator	Adobe InDesign CS (3.0.1)

MODEL : LK-P35B
MOBILE PRINTER
All specifications are subject to change without notice
This equipment has been tested and found to comply with the
limits for a Class B Digital Device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful
interference to radio communication. However, there is no
grantee that interference will not occur in a particular
installation. If this equipment dose cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on , the user is encouraged to
try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
The changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
To comply with the FCC RF exposure compliance
requirements, this device and its antenna must not be
co-located or operating to conjunction with any other antenna
or transmitter.
1. Product Overview
Table of Contents
1. Product Overview
2. Unpacking
3. Setting up the Product
3-1. Installing Battery
3-2. Battery Charging
3-3. Loading the Media
3-4. Black Mark
3-5. Printer Case Usage
3-6. Control Panel
10
3-7. Self Test
11
4. Peripherals Connection
12
4-1. Bluetooth Connection
12
4-2. Interface Cable Connection
13
5. Printer Specification
14
Power button
Paper feed
button
SERIAL
DC POWER
cover open
button
Battery
3. Setting up the Product
2. Unpacking
3-1. Installing Battery
PRINTER
BATTERY
SERIAL CABLE
RECHARGER
1. Align the battery hook as shown in the picture.
2. Push the battery into the printer until it locks in place.
Notes
As the battery is not charged at the time of your purchase, charge the battery prior
to using the printer.
ROLL PAPER
CD
MANUAL
PRINTER CASE(OPTION)
3-2. Battery Charging
3-3. Loading the Media
Place the paper roll as shown in the picture.
Press the cover open button.
(Make sure the paper is placed in right direction.)
1 2
3 4
1. The battery can be charged only when the temperature is 0~40°C.
2. Be sure that the printer is turn off and the battery to be charged is installed.
3. Connect the charger to the printer.
4. Recharging will now be started.
Notes
1. Do not turn on the printer power while you are charging the battery.
2. Dot not print while charging the battery
3. Do not connect the charger to the printer on the process of printing.
Pull a short length of paper out of the
printer and close the cover as shown
in the picture.
Press feed button and let the paper be
arranged properly for printing and cut the
extra paper with tear bar.
3-4. Black Mark
3-5. Printer Case Usage
Open the Velcro.
1 2
3 4
Put the printer into the case following the
direction as shown in the picture.
Notes
Black mark should be located on the opposite side of the printed side of the media.
Close the Velcro.
Fix this case to the belt with using the belt
buckle.
3-6. Control Panel
3-7. Self Test
You can check the printer setting state by doing self test when you set the printer first
time or encounter some problems.
- Control Circuit, Mechanisms, Print Quality, Rom version.
Button
Name
function
Power
button
This button is used to turn the printer on and off.
When the printer is off, press this button for approximately 2 seconds
and it will turn on the power. When you press this button in a state
that the printer is on, the printer will turn off.
Paper
Feed
Button
Paper output can be done manually by pressing this button.
Additionally, self-testing and Hexadecimal Dumping can be processed..
1. Refer to “3-10” for self test information.
2. Refer to the service manual regarding Hexadecimal Dumping.
Battery
Status
Lamp
1. If the Batt, LED are Lit, the battery is fully charged.
2. If you can hear beeping sound and LED light is turned off, it means
that the battery is at the lowest level.
3. If the battery is not charged at all, the printer turns off
automatically.
Error
Lamp
When you can not find the exact cause of problem through self test, investigate on
other hardware parts or software. This function is independent of other devices and
software.
●
Self –Test Instructions
1.Turn the printer power off an close the printer paper cover.
2. While pressing the paper feed button, turn on the printer power.
3. The printout is producing
4. To add a printout of the Hex-Dump mode, press the paper feed button once more.
5. To add a printout of ASCII pattern, press the paper feed button once more.
(Without pressing the paper feed button, self test ends automatically)
6.After ASCII pattern printing, self test ends automatically.
< Sample printout of Self Test> >
If the red light is turned on, it means that the paper cover is open.
**Sleep Mode**
After 3 minutes without working, it changes to sleep mode automatically.
Input Uart or serial data of Bluetooth.
Notes
The first 200ms’s data between sleep mode and warming-up could be ignored.
10
11
4. Peripherals Connection
This product can communicate with other devices via Bluetooth communication
and cable.
4-2. Interface Cable Connection
4-1. Bluetooth Connection
Serial
1. The printer can be connected to devices equipped with Bluetooth communication capacity
(PDA, PC, etc.).
2. Use the Bluetooth connection function supported by the device to connect to the printer.
12
Classifications
Description
Bluetooth Spec.
Bluetooth V2.0 / Class2(10m)
Frequency
2.4GHz ISM BAND
Baudrate
115200bps Fixed.
Data bit
8 Data bit Fixed.
Parity bit
No parity Fixed.
Stop bit
1 Stop bit Fixed.
1. Connect the Interface cable (Serial / USB) to the cable connector of the printer.
Notes
Use only cables provided by this manufacturer
2. Connect the interface cable to the USB or Serial port of the device (PDA, PC, etc)
13
5. Printer Specification
Direct Thermal
Printing Method
Printing Speed
60mm/sec
Resolution
203 DPI X 203 DPI
Weight
Character Size
Font A (12X24), Font B (9X24)
Temperature
Character per Line
Font A : 48pt , Font B : 64pt
Character Set
ALPHA NUMERIC Caractor, Extension Caractor
Barcode
EAN-8, EAN-13, Code39, ITF, UPC-A,
Codabar, Code93, Code128, PDF417(2D)
Emulation
ESC/POS
Driver
Window CE 4.2&5.0, Window Mobile 5.0
Sensor
Paper End Sensor
Paper
Reliability
Interface
Battery Recharger
battery
14
Dimension
Type
Thermal Paper
Width
80mm
Thickness
65㎕
Roll Diameter
Max. Φ45mm
Roll Core Inner
Diameter
12.5mm +/-0.5mm
TPH
50km
Battery
Continues printing(40mm/sec) – 40 ~ 50 mimutes
Waiting: 11 hours
Standard
Serial(RS-232C)
Option
Bluetooth Class2
Input
AC100~240V, 50/6 Hz
Output
8.4V , 800~1200mAh
Type
Li-on
Output
7.2V, 1200mAh
Charging time
2~3 Time
Humidity
WXDXH(mm)
106X100X49.5
WXDXH”
3.7X5.3X2.2
0.3kg
Operating
5~40℃
Storage
-20~60℃
Operating
35 ~ 80%
Storage
10 ~ 90%
15
SEWOO TECH CO.,LTD.
ADDRESS Doosung Bd, 689-20, Kumjung-dong, Kunpo-si, Kyunggi-do, Korea
TEL 82-31-459-8200 FAX 82-31-459-8880
URL http://www.miniprinter.com
Rev. 1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2008:10:27 13:20:17+08:00
Create Date                     : 2008:09:10 09:10:19Z
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
Page Count                      : 10
About                           : uuid:bdf0c0e2-5d7d-42f3-af94-b01f1fe71872
Creation Date                   : 2008:09:10 09:10:19Z
Mod Date                        : 2008:10:27 13:20:17+08:00
Metadata Date                   : 2008:10:27 13:20:17+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Derived From Instance ID        : 8fff4385-734c-11dd-a5a4-aa23f7a88ebc
Derived From Document ID        : adobe:docid:indd:cf82add4-6db6-11dd-9fac-fd261aacfede
Document ID                     : adobe:docid:indd:daae10bd-7ecc-11dd-9d9f-ee100d1f4761
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Reference Instance ID  : uuid:ecec2bb2-734b-11dd-829e-c925324d86a2, uuid:eeb6269f-ca3f-11dc-a182-a59ecf8afab4, uuid:c22b16d6-ca40-11dc-a182-a59ecf8afab4
Manifest Reference Document ID  : adobe:docid:photoshop:ecec2bb1-734b-11dd-829e-c925324d86a2, adobe:docid:photoshop:85dc35f7-ca1c-11dc-a182-a59ecf8afab4, adobe:docid:photoshop:eeb626a6-ca3f-11dc-a182-a59ecf8afab4
Format                          : application/pdf
Title                           : LK-P35B MANUAL 영문 0910.indd
Has XFA                         : No

EXIF Metadata provided by EXIF.tools