Parts Express DTA-21BT2 100W 2.1 CLASS D BLUETOTOH AMPLIFIER WITH SUB FREQUENCY ADJUSTMENT User Manual DTA 2 1BT2 indd

Parts Express International INC 100W 2.1 CLASS D BLUETOTOH AMPLIFIER WITH SUB FREQUENCY ADJUSTMENT DTA 2 1BT2 indd

User Manual

Model: DTA-2.1BT2 User ManualDayton Audio® Last Revised: 6/15/2018SPECIFICATIONS:Power Output:Power Output Subwoofer:Sub CrossoverImpedance:Power Input:Amplifi er Class:Bluetooth Distance:Bluetooth Compatibility:50 Watts x 2100 Watts50Hz to 120Hz4-8 Ohms24 VDCClass DUp to 30 metersA2DP, AVRCPdaytonaudio.comtel + 937.743.8248info@daytonaudio.com705 Pleasant Valley Dr.Springboro, OH 45066 USA5-Year Limited WarrantySee daytonaudio.com for details100W 2.1 CLASS D BLUETOOTH AMPLIFIERWITH SUB FREQUENCYADJUSTMENT
Front Panel1. Power and source select2. AUX1 source indicator3. AUX2 source indicator4. BT source indicator5. Subwoofer crossover6. Subwoofer volume7. Tone control8. Master volumeRear Panel9. BT antenna connection10. AUX2 L/R RCA11. AUX1 3.5 mm12. R/L speaker outputs13. Subwoofer output14. Power inputFront View of AmplierRear View of AmplierINTRODUCTIONThe DTA-2.1BT2 Amplier provides clean Class D power from a super compact and lightweight form factor. Using the included power supply, this amplier can power most speakers and passive subwoofer for your home or ofce. The DTA-2.1BT2 has standard stereo RCA and 3.5mm inputs on the rear panel. The Bluetooth technology is convenient wireless connectivity. AMPLIFIER CONNECTIONSCONNECTING SPEAKERS AND SETUPThe DTA-2.1BT2 features professional and convenient binding post style speaker connectors. Note: The binding posts will accommodate (dual) banana plugs or bare speaker wire.• Connect 4-8 Ohm passive speakers and subwoofer to the rear panel binding posts; be sure the polarity is correct.• Plug the power supply into the amplier and into the wall outlet.LINE LEVEL INPUT CONNECTION• Connect your source device (3.5 Aux 1 / RCA Aux 2) to the amplier.• Power on the amplier with a long press of the ON/OFF button.• Short press the select button to select the input, the red led indicator will illuminate under the selected input type. BLUETOOTH CONNECTIONThe Bluetooth audio source device must be paired to the DTA-2.1BT2 to play music wirelessly from your phone, tablet, or other device.• Turn on the amplier with a long press of the ON/OFF button.• Select the Bluetooth input by short press of the select button.• Search for DTA2.1BT2 on your mobile device.• You will hear a series of tones and see the BT indicator lights ashing red/blue, the amplier is now in pairing mode.• From your mobile device Bluetooth menu select “DTA-2.1BT2”.• The DTA-2.1BT2 BT indicator light will change to a slow pulsing red and will emit a short beep to inform you that the mobile device is successfully paired with the amplier.Note: Adjust the output level of the mobile device to approximately 75% and then adjust the master volume on the amplier to the ideal listening level, this will give you the best sound quality.Note: If your Bluetooth device has trouble pairing or connecting to the amplier, it may be necessary to repeat the connection process for the amplier and mobile device.Note: The power button and select button are the same. Long press the ON/OFF button to power on and off the amplier, short press select button to change the input selection.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.

Navigation menu