Parts Express DTA-21BT2 100W 2.1 CLASS D BLUETOTOH AMPLIFIER WITH SUB FREQUENCY ADJUSTMENT User Manual DTA 2 1BT2 indd

Download:
Mirror Download [FCC.gov]
Document ID	4025682
Application ID	+PVTLAyWHBnpaU8NE55iXA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.72kB (683985 bits)
Date Submitted	2018-10-01 00:00:00
Date Available	2018-10-01 00:00:00
Creation Date	2018-06-15 13:42:35
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-09-27 08:53:49
Document Title	DTA-2.1BT2 User Manual.indd
Document Creator	Adobe InDesign CC 13.1 (Windows)

100W 2.1 CLASS D
BLUETOOTH AMPLIFIER
WITH SUB FREQUENCY
ADJUSTMENT
SPECIFICATIONS:
Power Output:
Power Output Subwoofer:
Sub Crossover
Impedance:
Power Input:
Amplifier Class:
Bluetooth Distance:
Bluetooth Compatibility:
50 Watts x 2
100 Watts
50Hz to 120Hz
4-8 Ohms
24 VDC
Class D
Up to 30 meters
A2DP, AVRCP
Model: DTA-2.1BT2 User Manual
5-Year Limited Warranty
See daytonaudio.com for details
705 Pleasant Valley Dr.
daytonaudio.com
Springboro, OH 45066
tel + 937.743.8248
info@daytonaudio.com USA
Dayton Audio®
Last Revised: 6/15/2018
INTRODUCTION
The DTA-2.1BT2 Amplifier provides clean Class D power from a super
compact and lightweight form factor. Using the included power supply,
this amplifier can power most speakers and passive subwoofer for
your home or office. The DTA-2.1BT2 has standard stereo RCA and
3.5mm inputs on the rear panel. The Bluetooth technology is convenient
wireless connectivity.
AMPLIFIER CONNECTIONS
CONNECTING SPEAKERS AND SETUP
The DTA-2.1BT2 features professional and convenient binding post
style speaker connectors.
Note: The binding posts will accommodate (dual) banana plugs or bare
speaker wire.
• Connect 4-8 Ohm passive speakers and subwoofer to the rear panel
binding posts; be sure the polarity is correct.
• Plug the power supply into the amplifier and into the wall outlet.
LINE LEVEL INPUT CONNECTION
• Connect your source device (3.5 Aux 1 / RCA Aux 2) to the amplifier.
• Power on the amplifier with a long press of the ON/OFF button.
• Short press the select button to select the input, the red led indicator
will illuminate under the selected input type.
Front View of Amplifier
Rear View of Amplifier
Front Panel
1.
2.
3.
4.
5.
6.
7.
8.
Power and source select
AUX1 source indicator
AUX2 source indicator
BT source indicator
Subwoofer crossover
Subwoofer volume
Tone control
Master volume
Rear Panel
9. BT antenna connection
10. AUX2 L/R RCA
11. AUX1 3.5 mm
12. R/L speaker outputs
13. Subwoofer output
14. Power input
BLUETOOTH CONNECTION
The Bluetooth audio source device must be paired to the DTA-2.1BT2
to play music wirelessly from your phone, tablet, or other device.
• Turn on the amplifier with a long press of the ON/OFF button.
• Select the Bluetooth input by short press of the select button.
• Search for DTA2.1BT2 on your mobile device.
• You will hear a series of tones and see the BT indicator lights
flashing red/blue, the amplifier is now in pairing mode.
• From your mobile device Bluetooth menu select “DTA-2.1BT2”.
• The DTA-2.1BT2 BT indicator light will change to a slow pulsing red
and will emit a short beep to inform you that the mobile device is
successfully paired with the amplifier.
Note: Adjust the output level of the mobile device to approximately
75% and then adjust the master volume on the amplifier to the
ideal listening level, this will give you the best sound quality.
Note: If your Bluetooth device has trouble pairing or connecting to the
amplifier, it may be necessary to repeat the connection process
for the amplifier and mobile device.
Note: The power button and select button are the same. Long press
the ON/OFF button to power on and off the amplifier, short press
select button to change the input selection.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum 20cm distance between the radiator your body: Use
only the supplied antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2018:06:15 13:42:35-04:00
Metadata Date                   : 2018:09:27 08:53:49+08:00
Modify Date                     : 2018:09:27 08:53:49+08:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:e69f8a8f-8f90-4e32-a931-9df4a187f752
Original Document ID            : adobe:docid:indd:5a3ec06a-bfba-11e0-9f8f-f17ebd0da4fe
Document ID                     : xmp.id:504d1abf-1c29-6649-af5b-9541b4bd32b8
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:1d92f93f-f0d8-ef4d-97ef-f4a701c29977
Derived From Document ID        : xmp.did:e65b8c99-f234-7b4b-a20e-5ca9351f17c9
Derived From Original Document ID: adobe:docid:indd:5a3ec06a-bfba-11e0-9f8f-f17ebd0da4fe
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:06:15 13:42:35-04:00
Format                          : application/pdf
Title                           : DTA-2.1BT2 User Manual.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 3
Creator                         : Adobe InDesign CC 13.1 (Windows)

EXIF Metadata provided by EXIF.tools