Paxton Access 380127 Proximity LCD Reader User Manual

Paxton Access Ltd Proximity LCD Reader INSTRUCTION PROXIMITY LCD reader

a href="https://usermanual.wiki/Paxton-Access" itemprop="url"> Paxton Access >

User Manual

Page 122/07/2009FittingThe LCD reader is surface mounted onto the wall using the backplate and xings provided. It can be positioned to allow display of Portrait or Landscape images.Fix the mounting plate to the wall, noting the position of the orientation arrow (see diagram).Make a hole in the wall to take the reader cable and feed this through. Ensure there will be sufcient slack to allow the reader to slide over the mounting plate during installation.Present the reader to the mounting plate so that the slots pass over the side tabs in the plate.Image DownloadThe unit comes with four preloaded images. These relate to the 3 LED’s (Green, Amber and Red) on a standard Paxton Access reader plus a default image.Once a token has been read, the control unit establishes the access permissions of that user. Access is granted or denied as appropriate with the designated image displayed. For example, if access is denied the image assigned could show “Please return to Reception”.The LCD reader will accept:Switch2, Net2 and EM4100 tokens.Net2 hands free tokens (if an interface is tted).Slide the reader down the plate until the retaining pin clicks into position.A tool is provided with the reader to depress this pin should the reader ever need to be removed.The main visible face of the reader is a full color backlit LCD screen. This can be congured to display images of the customer’s choice. For example, an image using a company name/logo could be used as the default display on each reader around the site.The LCD reader comes with four preloaded images. These can replaced using an uploader program via a Net2Air USB bridge or a Net2Air USB dongle.Readers mounted togetherbetween readers12 inchesMounted on metal surfaceSuitabilitySecurity sensitive doors Wet environmentsIns-30091-US PROXIMITY LCD reader0AXTON!CCESSTechnical SupportTechnical help is available: Monday - Friday from 12:00 AM - 5:00 PM (PST) Saturday from 1:00 AM - 5:00 AM (PST)1.800.672.PAXT support@paxton-access.comDocumentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/
Page 2Cable extensionsRRReaders can be extended using Belden CR9540 10-core overall screened cable. The maximum length is 100 yards.WiringThe reader port module is designed to convert the standard reader ports on Switch2 and Net2 controllers to accept one or two RJ45 connections. Pull off the screw terminal block from the reader port and simply replace it with this module.This module can be used to provide a connection point for the reader RJ45 plug. The terminals on the module are then wired color for color to the controller.Alternatively, the reader can be wired directly into the screw terminals of the control unit by rst cutting off the RJ45 plug and stripping back the wires in the cable.Reader Port Module (325-030-US)This module may be purchased separately to speed up the installing and replacement of readers.Connection modulesFurther information on how to purchase Installer Tools is available at: http://paxton.info/841Reader junction box (325-020-US)Connection to a control unit reader port
Download:
Mirror Download [FCC.gov]
Document ID1157920
Application IDwTAcIX5vIAGk/nTbZJwSQQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize135.86kB (1698264 bits)
Date Submitted2009-08-24 00:00:00
Date Available2009-08-25 00:00:00
Creation Date2009-08-13 11:37:21
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2009-08-13 11:38:02
Document TitleINSTRUCTION - PROXIMITY LCD reader
Document CreatorAdobe InDesign CS2 (4.0.5)
FCC ID Filing: USE380127

Navigation menu