Paxton Access 500010 125 kHz Proximity Reader User Manual

Paxton Access Ltd 125 kHz Proximity Reader INSTRUCTION PROXIMITY marine reader

a href="https://usermanual.wiki/Paxton-Access" itemprop="url"> Paxton Access >

Manual

Ins-30045-US PROXIMITY marine reader06/07/2007Technical SupportTechnical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST Other documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/1 800 672 PAXT support@paxton-access.co.ukFittingFix the back plate to the wall with the stainlesss steel screws provided in the tting kit. The small slot in the plate edge should be positioned at the bottom.Where the reader is to be tted to a smooth surface, bulkhead, etc. a gasket is supplied to provide a weatherproof seal between the back plate and the mounting surface. (The reader has its own integral seal) Locate the reader in the keyhole slots provided in the back plate. Make sure that the locking pin is close to the slot in the edge of the back plate. Rotate the reader clockwise until the locking pin engages in the slot.To remove the reader, insert a small screwdriver into the cut out provided and use it to lift the locking pin. The reader can then be rotated anticlockwise to release it from the back plate.
RedBrownOrangeGreenYellowBlueMauveBlack/WhiteBrownYellowReader 1OrangeKeypad 1+12v0vN.C.N.O.ComN.C.N.O.ComAlarm Output0vContact0vExit0vTamperPSURxTxRelay 1Relay 2ExitContactTamperPSUOK5v12vRedBrownOrangeGreenYellowBlueMauveBlack/WhiteBrownYellowOrangeReader 2Keypad 2PowerRelay 1Relay 2InputsNetworkCAT5 cable codingWhite/GreenGreenWhite/OrangeOrange1234Screen or spare coresfrom network cableSerial number 241821Test ID: 012345678901z-144032 4 8 9 8 0 0 0 0 04RedBrownOrangeGreenYellowBlueMauveExitContactBlackCard reader or keypad 12v 0vN.C.N.O.ComBellPowerDoor relayAlarmwitch2SControlunitInputsWhite Labelled control units only provide 5v at the Red terminal. The red power wire for the reader should be connected directly to the 12v PCB supply terminal - as per diagram.Cable extensionsRed 12v dcBrownOrangeGreenYellowBlueMauveBlack/WhiteBrownYellowReader 1OrangeKeypad 1+12v0vN.C.N.O.ComN.C.N.O.ComAlarm Output0vContact0vExit0vTamperPSURxTxRelay 1Relay 2ExitContactTamperPSUOK5v12vRedBrownOrangeGreenYellowBlueMauveBlack/WhiteBrownYellowOrangeReader 2Keypad 2PowerRelay 1Relay 2InputsNetworkCAT5 cable codingWhite/GreenGreenWhite/OrangeOrange1234Screen or spare coresfrom network cableCAUTION: for 12v d.c. readers only. Forcorrect connection of old 5v readers, refer to instructions.Serial number 241821Test ID: 012345678901z-144032 4 8 9 8 0 0 0 0 04Red 12VBrownOrangeGreenYellowBlueMauveExitContactBlackCard reader or keypad 12v 0vN.C.N.O.ComBellPowerDoor relayAlarmwitch2SControlunitInputsCAUTION: For 12V d.c. readers only. For correct connection of old readers, refer to instructions.Readers can be extended using Belden CR9540 10-core overall screened cable. The maximum cable length between reader and control unit is 100 yards.Wiring
Download:
Mirror Download [FCC.gov]
Document ID828842
Application ID39GEb6qKrKg3jR5Ff2IXlg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize134.18kB (1677251 bits)
Date Submitted2007-08-14 00:00:00
Date Available2007-08-14 00:00:00
Creation Date2007-07-06 15:21:45
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2007-07-09 15:10:51
Document TitleINSTRUCTION - PROXIMITY marine reader
Document CreatorAdobe InDesign CS2 (4.0.5)
FCC ID Filing: USE500010

Navigation menu