Paxton Access 6902M2 Net2 Hands Free Keyfob - mk2 User Manual INSTRUCTION Hands free keyfob for Net2

Paxton Access Ltd Net2 Hands Free Keyfob - mk2 INSTRUCTION Hands free keyfob for Net2

User Manual

Ins-30099-US  Hands free keyfob for Net223/04/2009Technical SupportTechnical help is available:     Monday - Friday from 12:00 AM - 5:00 PM (PST)                               Saturday from 1:00 AM - 5:00 AM (PST)1.800.672.PAXT support@paxton-access.comSuitabilityCompatible with Hands Free readers Compatible with non Hands Free readersDocumentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/ 1 in1/2 in  2 inEM 4100  125 kHz 2.4 GHz0 °C  (32 °F) 55 °C  (131 °F)P38 3 ftP50 4 ftP75 5 ftP200 8 ft6 ft16 ftCR 2032SpecicationsCarrier frequencyOperating temperature - Battery limitsElectricalEnvironment DimensionsMin MaxWidthHeightDepthP200E metal mount Read range with Hands Free tokenSystem SpecicationTypical Battery LifeBattery Type5 yearsToken typeThe term ‘Hands free access control’ means the token that identies a user is read from within a pocket or handbag - No hands required. This is useful for gates and barriers, loading doors and where disabled or elderly people require access. The hands free keyfobs, in conjunction with a hands free interface, achieve this using unique Net2Air wireless technology. They also work in passive mode with all other Paxton Access proximity readers. The tokens are enrolled onto the Net2 system using the standard desktop reader.Long range reader
Remove the small retaining screw.  Insert a at head screw driver into the groove in the corner below the screw position (see diagram) and gently twist to pry the case open.Replace the battery, clip the cover closed and secure with the retaining screw.Battery life is approximately 3 years.Battery replacementThe token’s battery life is approximately 3 yearsThe keyfob has been designed with features to extend battery life.   This includes the prevention of repeated access requests to the same door while the keyfob remains in the eld of the reader. However, keeping the keyfob in the eld of a reader will reduce battery life.SAFETY WARNINGRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONSFCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We hereby declare that the Net2 Hands Free Keyfob mk2 FCC ID: USE6902M2 is a portable device which has a maximum transmit power of 0.18 mW and is not subject to the routine RF exposure evaluation as per Section 2.1093 of the FCC rules.

Navigation menu