APP_INSTRUCTION_SYGONIX_HOME_GATEWAY_SH_ Ver. 01 001597115 An En APP INSTRUCTION SYGONIX HOME GATEWAY SH
User Manual: Pdf APP_INSTRUCTION_SYGONIX_HOME_GATEWAY_SH_ - Ver. 01 Sygonix Home Gateway 2 W from Conrad.com
Open the PDF directly: View PDF 
.
Page Count: 33
| Download | |
| Open PDF In Browser | View PDF |
App Instruction Manual Sygonix Home Starter Kit Item No. 1597114 www.conradconnect.de Contents Conrad Connect............................................... 4 Symbols............................................................ 4 Core functions.................................................. 5 App to device communication.......................... 6 App – Installation.............................................. 7 App – Deinstallation......................................... 7 App – Multiple mobile devices.......................... 7 App – User account.......................................... 8 App – Landing page....................................... 10 App – Settings................................................ 11 App – Updates................................................ 11 Smart devices – Firmware update.................. 12 Gateway – Add............................................... 13 Gateway – Gateway page.............................. 14 Gateway – Settings........................................ 15 Gateway – Speaker volume........................... 15 Gateway – Indicator light................................ 16 Gateway – Reset............................................ 18 Sensors – Sensor types................................. 19 -2- Sensors – Add sensor.................................... 19 Sensors – Sensor page.................................. 21 Sensors – Delete sensor................................ 22 Sensors – Configure sensor........................... 23 Sensors – Enable/disable sensor................... 24 Function – Alerts............................................. 25 Function – Night light mode............................ 27 Function – Alarm clock................................... 29 Function – Scenes.......................................... 31 -3- Conrad Connect Your product is compatible with the Conrad Connect IoT platform at www.conradconnect.de. You can set up a personal account at the given URL. Symbols The following instructional symbols are used in this instruction manual. This triangle indicates important instructions contained in these operating instructions that must be followed. This symbol indicates that special advice and notes on operation are provided. -4- Core functions Measuring and recording Sensors measure and record illuminance, noise, pressure, temperature and humidity. Event minitoring Events are monitored and logged in the app. Alert mode You are alerted of events important to you. Night light mode Determine the behaviour of the gateway during the night. Alarm clock The alarm mode acts as a regular alarm clock. Scenes A scene is a set of procedures executed when the scene is triggered. -5- App to device communication ■■ In order to add a new device to the app, the mobile device that runs the app and the smart device must connect to your WLAN. ■■ Once a new device was added, you can control the smart device through the app via WLAN or mobile network. ■■ Subnetting: If you subnetted your WLAN network, then mobile device and smart device must be hosts on the same subnet. -6- App – Installation Apps are available for Android and iOS mobile devices. Make sure your mobile device satisfies the minimum requirements as outlined on the app page before downloading. 1. Head to the respective app store and download the app named 'Sygonix Home' onto your mobile device. 2. Set up a user account as outlined under App – User account. App – Deinstallation If you de-install the app from your mobile device, the settings are not lost and become available again as soon as you re-install the app and login with the same account details. Settings are stored under your 'Sygonix' account in the cloud. Refer to App – User account. App – Multiple mobile devices You can install the app on multiple mobile devices and login with the same account details to control the same set of smart devices from different mobile devices. -7- App – User account A 'Sygonix' account is required for you to operate the smart device. Your smart device cannot be linked to two accounts at the same time. Adding the smart device to a second account will remove it from the first account. Reset the smart device before linking to another account. Setting up a new account 1. Open the app. 2. Press Sign Up. 3. Enter user name and password, then confirm with Sign Up. 4. A new account will be set up for you. Wait until you receive the confirmation for successful setup. Logging in 1. Open the app. Login. 2. Press -- If you have logged in before, the username and password should appear in the corresponding fields. -- Tick Login automatically if you wish the app to log you in when you start the app. 3. Confirm with Login. -8- 4. If you login successfully, the landing page with the device list will appear. -- If no smart devices have yet been set up, the device list is blank. Account settings to open the On the landing page press account settings. Account settings allow you to: ■■ Add a profile picture ■■ Change the account name ■■ Change the account password ■■ Log out of your account After logging out of your current account you can log in with a different one. Integrating with Conrad Connect Note that your 'Sygonix' account is independent of Conrad Connect. If you wish to integrate your smart device with Conrad Connect you require a separate Conrad Connect account. Refer to www.conradconnect.de -9- App – Landing page Account settings App settings Add new devices Device list Show Devices Show Scenes - 10 - App – Settings Press to open app settings: Language Select app language Price Select currency Set the charge for one kWh Manual Download operating instructions About See app version and available app updates. Links to www.conrad.com and www.conradconnect.de App – Updates App software updates are managed as other apps through the corresponding app store. - 11 - Smart devices – Firmware update The firmware of your smart device is updated via the app. Available firmware updates are indicated in the device settings. For all firmware updates the smart device and the mobile device that runs the app must be connected to the same WLAN network during the update. 1. Make sure that mobile device and smart device are connected to the same WLAN network. 2. Select the device you want to update from the device list. to open the device settings. 3. Touch . 4. Under Firmware Version touch 5. The firmware of the smart device will be updated. will 6. When the update is complete, be shown. - 12 - Gateway – Add During set-up make sure to keep the mobile device running the app and the smart device within receiving distance of the wireless access point. 1. Connect your mobile device running the app to your WLAN network. 2. Open the app and navigate to the landing page. 3. Touch if it is not already selected. 4. Touch +. 5. Select the gateway. 6. Follow the on-screen instructions in the app. 7. When you see the confirmation notification, the gateway appears in the device list. 8. Add more gateways or exit. It is strongly recommended that you set up your router or access point (AP) to use WPA2-Personal with PSK encryption for authentication. - 13 - Gateway – Gateway page Back to home Gateway settings Modes Sensor list Add a new sensor - 14 - Gateway – Settings 1. Select a gateway from the device list on the landing page. to open the gateway settings. 2. Press 3. Adjust settings: Name Give your gateway a name. Firmware version Indicates the firmware version of the gateway. Update firmware if updates are available. About MAC address and serial number of gateway Volume Adjust speaker volume of gateway. Reset To Factory Settings Resets the gateway to its factory default settings. Refer to section Gateway – Reset for more information. Gateway – Speaker volume The gateway speaker volume is adjustable to your needs. Open the gateway settings (Gateway – Settings) and adjust the volume to your desired level. - 15 - Gateway – Indicator light Indications Observe the indicator lights during set up and use of your smart device. Indication Status/Action Fast blue flashing (4 times per sec) Ready to connect to network Stays blue for 5s then off Gateway successfully connected to router Slow blue flashing (2 times per sec) Connecting to network Blue flashing (4s on / 0.25 off) No Internet connection Quick green flashing Ready for sensor (4 times per sec) pairing Stays green for 5s then off New sensor successfully paired According to app settings A sensor is triggered - 16 - Manual control The gateway indicator light can be turned on and off manually. Configure the manual control as follows: 1. Go to the app landing page. if it is not already selected. 2. Touch 3. Select the gateway from the device list. 4. Touch Night Light Mode. 5. Under the Light section, set color and brightness of the gateway indicator light. 6. Touch Save. to manually turn the indicator 7. Touch light on ( ) and off ( ). ■■ Note that the colour you set here is also adopted by the Night Light mode. See chapter Function – Night light mode. Automated control Various functions work in conjunction with the gateway indicator light. Automated indicator light controls are mentioned throughout the manual. - 17 - Gateway – Reset Attention! Resetting removes all configuration data in the gateway and any linked external sensors. Option 1 1. 2. 3. 4. 5. Select the gateway from the device list. Touch . Touch Reset To Factory Settings . Confirm the prompt to reset. The device is reset and removed from the device list. Option 2 1. Navigate to the landing page. 2. Android: Hold down the gateway in the device list. iOS: Slide the gateway to the left in the device list. 3. Select Delete. 4. Confirm the prompt to reset. 5. The device is reset and removed from the device list. - 18 - Sensors – Sensor types The gateway itself features the following built-in sensors: ■■ Light sensor ■■ Noise sensor ■■ Pressure sensor Other sensors are external sensors, which can be added and removed again if required. The gateway sensors cannot be removed. Sensors – Add sensor Only sensors compatible with the Sygonix Home Starter Kit can be added. 1. Turn the external sensor on. 2. Select the gateway from the device list to which you want to add the sensor. 3. Touch +Add New Sensor. 4. Select the the sensor you want to add. 5. Follow the on-screen instructions. -- Start and end of the procedure are confirmed by signal sounds. -- If you attempt to add a sensor a second time, the instructions window does not close. Touch Cancel to close, then < to reach the landing page. 6. Wait for the confirmation window, then touch OK. - 19 - 7. You will be asked to name the sensor. Enter a name and confirm. -- If a sensor device comprises more than one sensor, you will be asked to name each sensor. 8. Touch < to return to the landing page. 9. The sensor is added to the sensor list. -- A device may be a multiple-in-one sensor. For such cases, multiple sensors are added to the sensor device list. -- By default, newly added sensors are disabled. Go to chapter Sensors – Enable/ disable sensor to learn how to enable/ disable and configure a sensor. Rename a sensor 1. In the sensor device list, swipe the newly added sensor left, then touch Edit. 2. Enter a new name for the sensor and confirm the dialog. - 20 - Sensors – Sensor page On the gateway page, touch a sensor to view sensor details. Measuring For sensors that measure and record, you can view the statistics. Date/Time Hour/Day/Month switch Graph Time - 21 - Logging For sensors that log trigger date and time, you can view the trigger history. Trigger time Sensors – Delete sensor Note that internal sensors (sensors built into the gateway) cannot be removed. 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Swipe the sensor you want to remove left. 5. Touch Delete to remove the sensor and all its settings. - 22 - Sensors – Configure sensor Note that sensors that do not allow for parameter adjustment are not listed in the sensor configuration panel. 1. Go to the app landing page. 2. Touch if it is not already selected. 3. Select the gateway from the device list. 4. Touch Alert Mode. 5. Select a sensor and edit its configurations: Enable Sensor Disable and enable the sensor Ring tone Select the sound to be played when the sensor is triggered. Select 'No ring' for no sound. Light If you want the see a notification light on the gateway when the sensor is triggered enable Light, else disable it. Set the colour and brightness of the notification light. 6. Touch Save to save the configurations. 7. Touch Save again to save the configurations under the Alert mode. - 23 - Sensors – Enable/disable sensor 1. 2. 3. 4. 5. 6. 7. 8. 9. Go to the app landing page. Touch if it is not already selected. Select the gateway from the device list. Touch Alert Mode. Touch the sensor you want to enable or disable. Activate Enable Sensor to enable, or deactivate to disable the sensor. Touch Save. Disable or enable other sensors. Touch Save again to save the configurations under the Alert mode. - 24 - Function – Alerts Status All alerts enabled All alerts disabled You can in any situation overwrite alerts manually by enabling or disabling them, irrespective of a schedule. Control alerts by schedule 09:00 21:00 Receive Alerts OFF 1. 2. 3. 4. 5. ON OFF Go to the app landing page. Touch if it is not already selected. Select the gateway from the device list. Touch Alert Mode. Under Alert Mode Enabled by timer determine start and end times and repeat pattern during which alerts are enabled. See diagram at the beginning of this section. - 25 - 6. Touch Save. 7. Touch Save once more. Saving immediately enables or disables alerts, depending on your schedule. Listen for the signal sound. ■■ To disable the schedule function, deselect all weekdays from the repeat pattern. ■■ If you manually disable alerts during scheduled times, the schedule temporarily will be disabled. Control alerts manually 1. 2. 3. 4. Go to the app landing page. if it is not already selected. Touch Select the gateway from the device list. or to enable/disable all alerts, Touch including alerts set for external sensors. ■■ Note that for some sensors (e.g. door bell), depending on their core function, the gateway still handles alerts even if alerts are disabled. Confirm alerts on gateway Once a sensor is triggered the gateway notifies you with colour, sound or both. Touch the button on the gateway to confirm and stop alerts. Also see chapter Function – Scenes. Take note of the following: ■■ Alerts must be confirmed/stopped manually. ■■ Alerts of the last triggered sensor overwrite previous alerts. - 26 - Function – Night light mode Night light mode works in conjunction with the manual control of the gateway indicator light. See chapter Gateway – Indicator light. Option 1 – Without motion sensor ON When night falls, the gateway indicator light comes on, and goes off again when daylight is measured. Option 2 – With motion sensor e.g. 1 min ON Option 2 works the same as Option 1 but is additionally controlled through motion sensing and a timer as follows: ■■ If movement is detected during the night, the gateway indicator light goes on and off again after expiry of a pre-set timer. - 27 - ■■ If motion is detected before the timer expires the timer is reset and restarted. Configure Night light mode 1. 2. 3. 4. 5. Go to the app landing page. Touch if it is not already selected. Select the gateway from the device list. Touch Night Light Mode. Configure the Night Light mode: Color Set a desired colour for the gateway indicator light. Brightness Set the indicator light brightness. Gateway light Enable/Disable the turns on in dark Night Light mode. Choose motion sensor Select at least one motion sensor if you want the Night Light mode to be controlled through motion sensing. Deferred timing Set a timer. - 28 - Function – Alarm clock Add alarm The alarm clock (Alarm Mode) has the function of a regular alarm clock and is configured as follows: 1. Go to the app landing page. if it is not already selected. 2. Touch 3. Select the gateway from the device list. 4. Touch Alarm Mode. 5. Touch +. 6. Configure the alarm: Time Set an alarm time. Repeat Set the repeat pattern. Alarming Sound Select a ring tone. Timer Set the alarm duration. Light When Light is activated, the gateway indicator light will flash when the alarm is triggered. Color Set a gateway indicator light color. Brightness Set the gateway indicator light color brightness. - 29 - 7. Touch Save. 8. Under Alarm Mode, activate/deactivate the alarm. Delete alarm 1. 2. 3. 4. 5. Go to the app landing page. Touch if it is not already selected. Select the gateway from the device list. Touch Alarm Mode. There are two ways to delete an alarm: -- Swipe left the alarm you want to delete, then touch Delete. -- Touch the alarm to open the editing panel. Scroll to the bottom and touch Delete. - 30 - Function – Scenes A scene is a collection of procedures to be executed when triggered. Open scenes as follows: 1. Go to the app landing page. 2. Touch . Default scenes Configurable Function Yes Enable all actions when you leave home. Yes Disable all actions when you return home. No Trigger the emergency sirene. No Confirm current alert. You cannot delete default scenes. User-defined scenes 1. Touch +. 2. Under the Add New Scene panel, touch the scene and give the scene a name. 3. Touch + next to Actions of scene. 4. Under the Add New Task panel, select a device. The available actions of the selected device are listed. Select an action and touch Save. - 31 - 5. Touch . Set a timer that triggers the scene and its linked actions after expiry. 6. Touch Save to save the scene. Execute a scene In the Scenes panel, touch the scene you want to execute. Edit a scene 1. In the Scenes panel, hold down the scene you want to edit. 2. Select Edit from the pop-up menu. 3. Edit the scene. 4. Touch Save to save the edits. Delete a user-defined scene 1. In the Scenes panel, hold down the scene you want to delete. 2. Select Delete from the pop-up menu. 3. Confirm the alert to delete the scene. - 32 - This is a publication by Conrad Electronic SE, KlausConrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2017 by Conrad Electronic SE. *1597114_P705_v1_1117_02_jh_m_app_en_1080x1920px_(2)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2017:11:14 15:46:50+08:00 Creator : Adobe InDesign CC 2017 (Windows) Modify Date : 2017:11:15 13:56:17+08:00 Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:11:15 13:56:17+08:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:9e4d5601-375a-49a8-a86e-3a8481ea2cf8 Original Document ID : xmp.did:8951e80e-4db4-7f47-92ff-ba55bee5a246 Document ID : xmp.id:05756118-0c0b-0445-ae3e-7f126a5a247b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:234ae5f7-a85d-a64d-b80a-99b096e4789d Derived From Document ID : xmp.did:1a5c2235-2b53-9841-959b-10536b2383c8 Derived From Original Document ID: xmp.did:8951e80e-4db4-7f47-92ff-ba55bee5a246 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:11:14 15:46:50+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 33EXIF Metadata provided by EXIF.tools