1000270043 Catalog
1000499181-Catalog 1000499181-Catalog 1000499181-Catalog B4 unilog cesco-content
167666-Catalog 167666-Catalog 167666-Catalog B5 unilog cesco-content
2016-07-29
: Pdf 1000270043-Catalog 1000270043-Catalog B2 unilog
Open the PDF directly: View PDF
Page Count: 869 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- What's New
- U-BLOK™ Power Distribution Blocks
- Ferrules, Bare and Insulated
- Heat Shrink Terminals
- Heat Shrink Kit
- BREAK-AWAY™ Lugs
- Narrow Tongue Connectors
- Flex Connectors
- YSR Reducer In-Line Splice Kits
- BusBar Grounding
- Universal Cable Ties
- IMPLO™ Transmission Connectors
- U-Die Kits
- Ferrule Installation Tools
- MRC840AL Mechanical Crimping Tool
- MD6-K Hand Operated Crimping Tool
- PATRIOT® HIGH PERFORMANCE PAT750XT-18V Battery Actuated Crimping Tool
- PATRIOT® PAT750K-18V Battery Actuated Crimping Tool
- PATRIOT® IN-LINE® PATMD6K-14V Battery Acutated IN-LINE® Crimping Tool
- ENFORCER™ HIW716ENF Low Pressure Hydraulic Impact Wrench
- SmartCart® Wire Management
- Wire Caddies Wire Management
- Master Index
- Section A—Mechanical Connectors
- Lightning Protection Information
- Product Design Information
- SERVIT® Connectors
- OKLIP™ Connectors
- VERSITAP™ Connectors
- SCRULUG™ Connectors
- KA-LUG™ Connectors for Copper Cable
- VERSILUG™ Connectors for Copper Cable
- QIKLUG™ Connectors
- Type QR QIKLINK™ Splice or Reducer
- VARITAP™ T-Connector
- Type E-C-G Transformer Tap Adapter
- Types VA, VVA VARILUG™ Connectors
- Bar Clamp Assemblies
- Universal Terminal Connectors
- Transformer Lug Kits
- Splicers/Reducers
- Taps
- Type BIPC Insulation Piercing Connectors
- Terminal Blocks
- U-BLOK™ Connectors
- SPEC-BLOK™ Connectors
- VERSI-POLE™ Connectors
- UNITAP™ Connectors
- Section B—Small Compression Connectors
- General Information
- Military Specification Equivalent Tables
- Ferrules
- HYDENT™ Heat Shrink Connectors
- HYLUG™ Terminals
- Types T and YAD, Uninsulated
- Types YAV BOX and YAV, Seamless Uninsulated, Heavy Duty Ring Tongue
- Types YAV-L BOX and YAV-L, Large Uninsulated, Ring Tongue
- Types YAV-H BOX and YAV-H, Uninsulated Ring Tongue
- Type YBM, Flag-Type, Ring-Tongue
- Types YAV-R and YAV-RS, Heavy Duty Right-Angle
- Types T-F and YAD-F, Uninsulated, Fork Tongue
- Types YAV-T-F BOX and YAV-T-F, Uninsulated, Fork Tongue
- Types YAV-H-F BOX, YAV-H-F, and YAV-Z, Uninsulated, Fork Tongue
- VINYLUG™ Terminals
- INSULUG™ Terminals
- Types TN and YAES, Nylon Insulated, Ring Tongue
- Types YAE-G and YAE-N, Nylon Insulated, Ring Tongue
- Type YAES-K, Nuclear Terminals and Splice
- Types YAEV and YAEV-L, Nylon Insulated, Ring-Tongue
- Type YAEV-H, Nylon-Insulated, Ring-Tongue
- Type YAEV-RS, Nylon-Insulated, Right-Angle
- Type YAEV-RH, Nylon-Insulated, Right-Angle
- Types TN-F and YAES-F, Nylon Insulated, Fork Tongue
- Types YAE-N-F BOX and YAE-N-F, Nylon Insulated, Fork Tongue
- Types YAE-Z BOX and YAE-Z, Nylon Insulated, Flanged Fork
- FINGRIP™ Connectors
- Type Q-F, Non-Insulated Female Quick Disconnects
- Type QP-F, Vinyl Insulated Female Quick Disconnects
- Type QN-F, Nylon Insulated Female Quick Disconnects
- Type Q-M, Non-Insulated Male Quick Disconnects
- Type QP-M, Vinyl Insulated Male Quick Disconnects
- Type QN-M, Nylon Insulated Male Quick Disconnects
- Types PGP and PGN, Male/Female Combination Quick Disconnects
- Types FQN-F and FQN-M, Nylon Fully Insulated Female and Male Quick Disconnects
- Type FL, Flag-Style Female Quick Disconnect
- Uninsulated Splices
- Insulated Splices
- Section C—Medium and Large Compression Connectors
- Introduction
- Expanded Ranges Tables
- Die Sets and Die Index Charts
- HYLUG™ Connectors
- BREAK-AWAY™ Terminals
- Blank Tongue Terminals
- Turbine Lug Kits
- Code Conductors
- Flex Conductors
- One Hole HYLUG™
- Types YA-L, YA-L-FX, YAV, YAV-L-FX, Standard Barrel
- Type YAV-L-NTFX, Standard Barrel, Narrow Tongue
- Type YAG-L-TC, Standard Barrel
- Type YA-LB, Standard Barrel, Belled End
- Types YAZ, YAZV, Long Barrel with Inspection Window
- Types YA-TC-FXV, YAV-TC-FXB, Long Barrel, Belled End
- Type YAG-L-TC-LD, Standard Barrel, Lead Plated
- Two Hole HYLUG™
- Types YA-L-2TC, YA-L-2TC-FX, YAV-L-2TC-FX, Standard Barrel
- Type YAV-L-NTFX, Standard Barrel, Narrow Tongue
- Type YAZ-FX, Long Barrel with Inspection Window
- Types YA-2TC-FXB, YAV-2TC-FXB, Long Barrel, Belled End
- Types YAZ-2-NTFX, YAZV-2NTFX, Long Barrel, Narrow Tongue
- Type YAG-L-2TC-LD, Standard Barrel, Lead Plated
- Type YAS-L-2TC-FX,60, Double Barrel
- One Hole HYLUG™
- Copper Tubular Terminals
- E-Line HYLUG™ Terminals
- HYLINK™ Splices
- Type YS-L, Standard Barrel, Copper Compression
- Type YS, Long Barrel, Copper Compression
- Type Y-R, Reducing Adapter for Copper
- Type YS-LB, Standard Length, Belled Barrel
- Types YS-T and YSP-T, Standard Barrel, Tapered Ends
- Type YS-FXB, Long Barrel, Belled Barrel
- Type YS-A, Uninsulated Aluminum Splices
- Type YS-AT, High Voltage, Uninsulated Aluminum Splices
- HYSPLICE™
- HYREDUCER™
- Copper Taps
- "T" Connectors
- HYPLUG™
- HYSTACK™ Terminal Stacking Adaptors
- Aluminum HYLUG™ Terminals
- Transformer Lug Kits
- H-CRIMPIT™ Connectors
- Section D—Hardware
- Section E—Grounding
- Table of Contents
- HYGROUND® Features and Benefits
- HYGROUND® Compression Grounding Connectors
- Type YGL-C HYGRID™ Cross Connector
- Type YGLR-C GRIDLOK™ Connector
- HYTAP™ Grounding Connectors
- Type YGC Copper CRIMPIT™
- HYTAIL™ Grounding Connectors
- HYLUG™ Terminals
- HYLINK™ Terminals
- Type YGF Grounding Plate
- Type YGIB GROUNDLINK™ Connector
- Type GSTUD-HY VERSITAIL™ Connector
- Types YGT and YTTAG, Static Grounding Receptacles
- Type YG-B Bus Bar Connectors
- Mechanical Grounding Connectors
- Types KC and K2C, SERVIT POST™
- Types KC22J12T13, EQC632C, Transformer Ground Connectors
- Type KS, SERVIT®
- Type GKA
- Type KPB
- Type CL50-1, Copper Lay-In QIKLUG™
- Type GAR
- Types GAR-BU and GAR3902
- Type GAR-RB
- Type GAR-TC, Water Pipe Ground Connector
- Type GD, Cable to Rod/Tube Ground Connector
- Types GP and GK, Copper Cablest to Rod or Pipe
- Type BDT BONDIT™ Bonding Connector
- Water Pipe Grounding
- Type GC-A, Dual Rated
- Type GG
- Type GQ, for Copper Cable to Tube
- Type GX, for Copper Cables
- Type GRC, High Strength
- Type GCRT1/0, Range Taking
- Type GRL, Light Duty
- Type B, Flexible Copper Braid Jumpers
- Types GB, GBM, GC, GCM, Copper Cable to Bar
- Types GL and GZ, Copper Cable to Bar
- Type GC-CT, Cabletray Ground Clamp
- Type GTC1AC34RA, Protective Grounding Clamp
- Type GIE-G
- Rail Connectors
- Type QGFL BARTAP™
- Type GA-H, Copper Cable to "H" Beam
- Raised Floor Grounding Connectors
- BusBar
- BURNDYWeld®
- Benefits
- Making a BURNDYWeld® Connection
- Weld Metal
- BURNDYWeld® Molds
- Multiple Use
- Type BCC-1, Horizontal End to End
- Type BCC-2, Horizontal Cable Tap to Horizontal Cable Run
- Type BCC-4, Horizontal to Horizontal Cable Cross
- Type BCC-11, Horizontal to Horizontal Cable Cross
- Type BCC-6, Horizontal Parallel Tap
- Type BCC-14, Horizontal Parallel through Cables
- Type BCC-7, Horizontal Parallel through Cables
- Type BCR-1, Horizontal Cable Terminal to Ground Rod
- Type BCR-2, Horizontal Cable to Ground Rod
- Type BCR-3, Horizontal Through Cable to Ground Rod
- Type BCR-17, Horizontal Run and Tap Cables to Ground Rod
- Type BCR-24, Horizontal Parallel Run Cables to Ground Rod
- Type BCS-1, Horizontal Cable to Horizontal Steel Surface
- Type BCS-8, Horizontal Cable to Horizontal Steel Surface
- Type BCS-2, Horizontal Through Cable to Horizontal Steel Surface
- Type BCS-9, Horizontal Through Cable to Horizontal Steel Surface
- Type BCS-3, Angular Cable Drop to Vertical Steel Surface
- Type BCS-23, Vertical Cable Drop to Vertical Steel Surface
- Type BCS-4. Vertical Through Cable to Vertical Steel Surface
- Type BCS-6, Horizontal Through Cable to Vertical Steel Surface
- Type BCS-17, Overhead Vertical Tap Cable to Vertical Steel Surface
- Type BCS-18, Horizontal Tap Cable to Vertical Steel Surface
- Type BCS-5, Horizontal Cable Tap to Horizontal Cast Iron Surface
- Type BCRE-1, Horizontal Parallel Tap to Rebar
- Type BCRE-2, Horizontal Cable Tap to Horizontal Rebar Run
- Type BCRE-3, Horizontal Through Cable to Vertical Rebar
- Type BCRE-4, Horizontal Through Cable to Horizontal Rebar
- Type BCRE-6, Horizontal Cable Tap to Vertical Rebar
- Single Use Molds
- Multiple Use
- BURNDY® GROUNDMAX™
- BURNDY® GRIDMAX™
- BURNDYWeld® Tools and Accessories
- B-106 and B-107 Handle Clamps
- B40-0106-75 Handle Attachment
- Mold Support Clamp
- Vertical Magnetic Clamps
- Horizontal and Vertical Chain Clamps
- B38-0330-00 Cable Clamp
- Cable Cleaning and Card Cloth Brush
- Mold Cleaners
- Packing Material
- BURNDYWeld® Tool Kits
- BURNDYWeld® Tools
- B38-0101-00 Rasp
- B38-0309-00 Flint Ignitor
- Ground Driving Sleeves
- Shim Stock and Adapter Sleeves
- Trouble Shooting Tips
- Section F—Accessories
- Section G—Cable Ties
- Cable Tie Features and Specifications
- Materials and Specifications
- Material Performance Guide
- Military Specification Cable Ties
- Standard Cable Ties
- Universal Cable Ties
- Releasable Cable Ties
- Identification Cable Ties
- Mounting Hole Cable Ties
- HALAR® Cable Ties
- TEFZEL® Cable Ties
- Hook and Loop Straps
- Mounting Bases
- Cable Hangers
- Stainless Steel Ties
- Cable Tie Variety Pack
- Cable Tie Tools
- Section H—Overhead
- Tap Connectors
- Mechanical (Bolted) Connectors
- Features and Benefits
- Types KS and KS-3 SERVIT®
- Type SC, SERVIT® Cover (Hug-A-Bug)
- Types KSU and KVS
- Type KVSW
- Types KVSU and KVS
- Type KVS-A, Aluminum
- Types UC-L and UC-K, Universal Parallel Clamps
- Type CP-A, Parallel Clamp
- Type VP, Parallel Clamp
- Type UW-R, Deadend Clamp
- Types UC and CP, Parallel Clamps
- Type QPX, VERSITAP™ Parallel Clamp
- Type VT, "T"-Connector
- Types UCG-R, UCG-RS, UC-R, UC-RS, Parallel Clamps
- Type UC Kit
- UCCOVER1BOX25, TAPIT™ Cover
- Type LSC Catcher
- Compression Connectors
- Transformer and Equipment Tap Connectors
- Compression Splices
- Compression Terminals and Accessories
- Mechanical (Bolted) Connectors
- Tap Connectors
- Section I—Transmission
- Quick Catalog Reference
- ACSR Conductor Accessories
- AAC/ACAR Conductor Accessories
- ACSS Conductor Accessories
- Steel Conductor Accessories
- ACCC® Composite Core Accessories
- IMPLO™
- Motion Control
- Section J—WEJTAP™
- Table of Contents
- WEJTAP™ Connection System
- WEJTAP™ and Test Data
- Ordering Information
- WEJTAP™ Covers
- Connector Selection Charts
- WEJTAP™ and STIRRUP™ Power Boosters
- STIRRUP™ Selection Chart
- WEJTAP™ Installation Tools
- WEJTAP™ Installation Tool Accessories
- WEJTAP™ POWERLUG™
- WEJTAP™ Hotstick Accessories
- WEJTAP™ Kits
- WEJTAP™ In-Line Disconnect
- Section K—Underground
- Underground Network
- Underground System Connection and Protection
- Types of Underground Connectors and Accessories
- Multiple Outlet Connectors
- MOLE™ Ordering Information
- MOLE™
- MOLE™ Stud Connectors
- MOLE™ Outlet Plugs
- Socket and Nut Assemblies
- MOLE™ Compresson Cones
- MOLE™ Couplers
- NOTAPE™ MOLE™ Sleeves
- MOLE™ Outlet Insulating Sleeves
- HYCRAB™ Connectors
- Network Protection
- Information
- Limiters
- Types YFS-CR and YFS-CP
- Type YFS-CPL, Long
- Types YFSR, YFSP
- Type YFSP-L, Long
- Types YFSH, YFSH-P, Limiter Shell
- Type YFSC, Insulating Sleeve
- Types YFA-CR, YFA-CP, Lug Assembly
- Type YFA-CPL, Long Lug Assembly
- Types YFAR, YFAP, Limiter Lugs
- Type YFAP-L, Long Limiter Lug
- Type YFAH, Limiter Shell
- Type YFAC, Insulating Sleeves
- MOLIMITER™ Assemblies
- Limiter Tap Assemblies
- Limiter Tee Tap
- Replaceable Link Limiter
- Replaceable Link MOLIMITER™
- Limiter Link
- Limiter Base
- Limiter Sleeve
- HYLUG™ for Use with Replaceabel Limiters
- Limiter Bushings
- Network Protector Fuses and Enclosures
- T-Connectors
- High Capacity Limiters
- Underground Residential Distribution Systems
- MOLE™
- Type RDMD-28G URD Stud MOLE™
- Type RDMD-2858D Stud MOLE™
- Type RDMD-28CR Rubber Insulating Boot
- Type RDM-28 URD MOLE™
- Type RDM-28T URD MOLE™
- Types RYA-UC, RYA-AC, MOLE™ Tap Kits
- Types RYA-UCR, RYA-ACR
- Types RA6UC-SL, RA6UCR-6L, Street Lighting Tap Kit
- Type YS-CG, Insulated Splice Kit
- Types J1592, J1207 Y-LOK, for Locking Enclosures
- Splices
- Service Taps
- Transformer Terminals
- Power Distribution Blocks
- MOLE™
- Underground Network
- Section L—Substation, Bolted
- Copper Connectors
- Aluminum Connectors
- Section M—Substation, Welded/EHV
- Table of Contents
- Introduction
- Nomogram
- Gradient Calibrator
- Formula for Determining the Voltage Gradient
- Nomogram
- Interference and Contamination
- Welded Connectors
- Bolted Connectors
- Section N—Tools
- Introduction and Warranty Information
- Dies
- Crimpers—Mechanical and Ratchet
- Y10D, Hand-Operated
- Y10-22, Hand-Operated
- YF-TOOL, Hand-Operated
- Y8MRB-1, Hand-Operated
- MR8, Hand-Operated
- MR15, MR18, MR20, Hand-Operated
- MR4C, Hand-Operated
- Y1MRTC, Hand-Operated
- M8ND, Hand-Operated
- MRC840, MRC840AL, Hand-Operated
- MY, Hand-Operated
- OH25, Hand-Operated
- OUR840, Hand-Operated
- MD6-8, Hand-Operated
- MD7 POSI-PRESS, Hand-Operated
- MD7-34R POSI-PRESS, Hand-Operated
- MD6, MD7 Tooling Accessories
- MD6R, Hand-Operated
- MD6 Hotstick Tools, Hand-Operated
- RK147-2 Wire Stippers, Hand-Operated
- WIREMIKE, Hand-Operated
- Crimpers—Self-Contained Hydraulic
- Crimpers—Batter Actuated
- Crimpers—Remote Hydraulic
- Crimpers—Pneumatic
- Cutters—Mechanical and Ratchet
- Cutters—Self-Contained Hydraulic
- Cutters—Battery Actuated
- Cutters—Remote Hydraulic
- Hydraulic Pumps
- Low Pressure Hydraulic
- Knockouts—Mechanical and Ratchet
- Knockouts—Hydraulic
- Conduit Benders
- Wire Management—The SmartCart®
- Wire Management—Wire Caddies
- BWC04EHC, Economy Hand Caddy
- BWC06FHC, Folding Hand Caddy
- BWC01CMC, Compact Medium Caddy
- BWC01CDC, Compact Data Caddy
- BWC46CWD, Caddy Wire Dispenser
- BWC01FCMR, Folding Caddy Mount Reel
- BWC28FAC, Folding A-Frame Caddy
- BWC01FSMC, Folding Stud Mount Caddy
- BWC01FAR, Folding Add-on Reel
- BWC01FFMC, Folding Floor Mount Caddy
- BWC46RC, 6 Spindle Reel Caddy
- BWC410RC, 10 Spindle Reel Caddy
- BWC420MSC, Multi-Spool Caddy
- BWC24HTC, Hand Truck Caddy
- BWC25LHTC, BWC00ADP, BWC27LHTCADP, Large Hand Truck Caddy and Accessories
- BWC24MTHTC, Multi-Task Hand Truck Caddy
- BWC00JS, Jack Stand
- BWC20PRSF, Portable Reel Support Frame
- BWC32DCC, Double Coil Caddy
- BWC40PC, Push Cart
- BWC43UC, Utility Cart
- BWC43TRC, Triple Reel Caddy
- Section O—Reference Material and General Information
- Basic Electrical Connection Principles
- Hardware Data
- Cable Data Tables
- AWG vs. Metric Wire Size Chart
- Inches and Millimeters Conversion Chart
- Terminal Stud Size Chart
- Die Set Conversion Chart (Obsolete Dies and Tools)
- Die Sets
- Present Installation Tool Index
- Present Installation Tool Index Charts
- Catalog Numbers Requiring MSDS
- Color Coding for Overhead Connectors
- Color Coding for Al/Cu Connectors
- Color Coding for Copper Lugs and Splices
- Alpha-Numeric Index
- Product/Trade Name Index