Canon Mx490 Series Online Manual 1003107 1000317360 MSDS

2016-09-04

: Pdf 1000317360-Msds 1000317360-MSDS B4 unilog

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

5535A Series QSIII 05/27/15

Safety Data Sheet
Copyright,2015,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed
provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither
the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
26-4549-7
05/27/15

Document Group:
Issue Date:

Version Number:
Supercedes Date:

5.00
08/07/14

Product identifier
5535A Series QSIII
ID Number(s):
80-6112-3194-7, 80-6112-3195-4, 80-6112-3196-2, 80-6112-3197-0, 80-6112-3198-8, 80-6112-3199-6, 80-6112-3200-2, 80-61123201-0, 80-6112-3202-8, 80-6112-3203-6, 80-6112-3204-4, 80-6112-3205-1, 80-6112-3206-9, 80-6112-6734-7, 80-6114-4337-7

Recommended use
Electrical
Supplier's details
MANUFACTURER:
DIVISION:

3M
Electrical Markets Division

ADDRESS:
Telephone:

3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)

Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data
Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included.
Please do not separate the component documents from this cover page. The document numbers for components of this
product are:
06-4861-8, 11-4628-1, 34-7684-3
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M
________________________________________________________________________________________________________
Page 1 of 2

5535A Series QSIII 05/27/15

3M USA SDSs are available at www.3M.com

________________________________________________________________________________________________________
Page 2 of 2

P55/R Lubricant, Red

03/19/14

Safety Data Sheet
Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:
Issue Date:

06-4861-8
03/19/14

Version Number:
Supercedes Date:

11.00
03/21/13

SECTION 1: Identification
1.1. Product identifier
P55/R Lubricant, Red
Product Identification Numbers
ID Number
UPC
78-8096-4318-8
80-6116-0479-6

ID Number
78-8126-9891-4

UPC

1.2. Recommended use and restrictions on use
Recommended use
Electrical, ELECTRICAL LUBRICATING GREASE
1.3. Supplier’s details
MANUFACTURER:
DIVISION:
ADDRESS:
Telephone:

3M
Electrical Markets Division
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification
2.1. Hazard classification
Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.
2.2. Label elements
Signal word
Not applicable.
Symbols
Not applicable.
Pictograms
Not applicable.

__________________________________________________________________________________________
Page 1 of 8

P55/R Lubricant, Red

03/19/14

Precautionary Statements
Disposal:
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3. Hazards not otherwise classified
None.

SECTION 3: Composition/information on ingredients
Ingredient
1,1,2,3,3,3-HEXAFLUORO-1-PROPENE, OXIDIZED,
POLYMD.
SYNTHETIC AMORPHOUS SILICA, FUMED,
CRYSTALLINE FREE
C.I. PIGMENT RED 170

C.A.S. No.
69991-67-9

% by Wt
95 - 98

112945-52-5

<= 5

2786-76-7

<= 0.05

SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you are concerned, get medical advice.
Skin Contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.
If Swallowed:
No need for first aid is anticipated.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable.

SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance
Carbonyl Fluoride
Carbon monoxide
Carbon dioxide
Hydrogen Fluoride

Condition
During Combustion
During Combustion
During Combustion
During Combustion

__________________________________________________________________________________________
Page 2 of 8

P55/R Lubricant, Red

03/19/14

Oxides of Nitrogen

During Combustion

5.3. Special protective actions for fire-fighters
No unusual fire or explosion hazards are anticipated. When fire fighting conditions are severe and total thermal
decomposition of the product is possible, wear full protective clothing, including helmet, self-contained, positive pressure or
pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective
covering for exposed areas of the head.

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ventilate the area with fresh air.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic
absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not
remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed
container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a
qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and
SDS. Seal the container. Dispose of collected material as soon as possible.

SECTION 7: Handling and storage
7.1. Precautions for safe handling
For industrial or professional use only. Keep away from reactive metals (eg. Aluminum, zinc etc.) to avoid the formation of
hydrogen gas that could create an explosion hazard.
7.2. Conditions for safe storage including any incompatibilities
Store away from acids. Store away from strong bases.

SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS.
8.2. Exposure controls
8.2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
None required.
Skin/hand protection
No chemical protective gloves are required.
__________________________________________________________________________________________
Page 3 of 8

P55/R Lubricant, Red

03/19/14

Respiratory protection
None required.

SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Liquid
General Physical Form:
Paste
Specific Physical Form:
ODORLESS, RED COLOR,GREASE
Odor, Color, Grade:
Not Applicable
Odor threshold
Not Applicable
pH
Not Applicable
Melting point
270 ºC [Details: MITS data (per supplier info)]
Boiling Point
Flash point > 93 °C (200 °F)
Flash Point
No Data Available
Evaporation rate
Not Applicable
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
Not Applicable
Flammable Limits(UEL)
<=0.01 mmHg
Vapor Pressure
Vapor Density

No Data Available

Density
Specific Gravity

No Data Available
Approximately 1.99 Units not avail. or not appl. [Ref Std:
WATER=1]

Solubility in Water
Solubility- non-water

Nil
Not Applicable

Partition coefficient: n-octanol/ water

No Data Available

Decomposition temperature
Viscosity
Average particle size
Bulk density
Hazardous Air Pollutants
Molecular weight
Volatile Organic Compounds
Percent volatile
Softening point
VOC Less H2O & Exempt Solvents

Not Applicable
No Data Available
No Data Available
No Data Available
No Data Available
No Data Available
No Data Available
0.00 %
No Data Available
No Data Available

SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.

__________________________________________________________________________________________
Page 4 of 8

P55/R Lubricant, Red

03/19/14

10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Not determined

10.5. Incompatible materials
Strong acids
Strong bases
Reactive metals
No Data Available
10.6. Hazardous decomposition products
Substance
None known.

Condition

Refer to section 5.2 for hazardous decomposition products during combustion.
Extreme heat arising from situations such as misuse or equipment failure can generate hydrogen fluoride as a decomposition
product.

Route

Species

Value

__________________________________________________________________________________________
Page 5 of 8

P55/R Lubricant, Red

03/19/14

Overall product
SYNTHETIC AMORPHOUS SILICA, FUMED,
CRYSTALLINE FREE
SYNTHETIC AMORPHOUS SILICA, FUMED,
CRYSTALLINE FREE

Ingestion
Dermal
InhalationDust/Mist
(4 hours)
Ingestion

SYNTHETIC AMORPHOUS SILICA, FUMED,
CRYSTALLINE FREE

Rabbit

No data available; calculated ATE > 5,000 mg/kg
LD50 > 5,000 mg/kg

Rat

LC50 > 0.691 mg/l

Rat

LD50 > 5,110 mg/kg

Species
Rabbit

Value
No significant irritation

Species
Rabbit

Value
No significant irritation

Species
Human
and
animal

Value
Not sensitizing

Species

Value

ATE = acute toxicity estimate
Skin Corrosion/Irritation
Name
SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE

Serious Eye Damage/Irritation
Name
SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE

Skin Sensitization
Name
SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE

Respiratory Sensitization
Name

Germ Cell Mutagenicity
Name
SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE

Route
In Vitro

Value
Not mutagenic

Carcinogenicity
Name
SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE
FREE

Route
Not
Specified

Species
Mouse

Value
Some positive data exist, but the data are not
sufficient for classification

Reproductive Toxicity
Reproductive and/or Developmental Effects
Name

Route

Value

Species

Test Result

SYNTHETIC AMORPHOUS SILICA,
FUMED, CRYSTALLINE FREE
SYNTHETIC AMORPHOUS SILICA,
FUMED, CRYSTALLINE FREE
SYNTHETIC AMORPHOUS SILICA,
FUMED, CRYSTALLINE FREE

Ingestion

Not toxic to female reproduction

Rat

Ingestion

Not toxic to male reproduction

Rat

Ingestion

Not toxic to development

Rat

NOAEL 509
mg/kg/day
NOAEL 497
mg/kg/day
NOAEL
1,350
mg/kg/day

Exposure
Duration
1 generation
1 generation
during
organogenesi
s

Target Organ(s)
Specific Target Organ Toxicity - single exposure
Name

Route

Target Organ(s)

Value

Species

Test Result

Exposure
Duration

Exposure
Duration
occupational
exposure

Specific Target Organ Toxicity - repeated exposure
Name

Route

Target Organ(s)

Value

Species

Test Result

SYNTHETIC
AMORPHOUS SILICA,

Inhalation

respiratory system |
silicosis

All data are negative

Human

NOAEL Not
available

__________________________________________________________________________________________
Page 6 of 8

P55/R Lubricant, Red

03/19/14

FUMED, CRYSTALLINE
FREE

Aspiration Hazard
Name

Value

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

SECTION 12: Ecological information
Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.

Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.

SECTION 13: Disposal considerations
13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Prior to disposal, consult all applicable authorities and regulations to insure proper classification. Dispose of waste product in
a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper
destruction may require the use of additional fuel during incineration processes. Combustion products will include halogen
acid (HCl/HF/HBr). Facility must be capable of handling halogenated materials. Empty and clean product containers may
be disposed as non-hazardous waste. Consult your specific regulations and service providers to determine available options
and requirements.
EPA Hazardous Waste Number (RCRA): Not regulated

SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.

SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No

Pressure Hazard - No

Reactivity Hazard - No

Immediate Hazard - No

Delayed Hazard - No

15.2. State Regulations
Contact 3M for more information.

15.3. Chemical Inventories
The components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification
__________________________________________________________________________________________
Page 7 of 8

P55/R Lubricant, Red

03/19/14

and Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information.
The components of this product are in compliance with the new substance notification requirements of CEPA.
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.

15.4. International Regulations
Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: Other information
NFPA Hazard Classification
Health: 0 Flammability: 1 Instability: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
HMIS Hazard Classification
Health: 0 Flammability: 1 Physical Hazard: 0 Personal Protection: X - See PPE section.
Hazardous Material Identification System (HMIS® III) hazard ratings are designed to inform employees of chemical hazards
in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use
and are not intended for use in emergency situations. HMIS® III ratings are to be used with a fully implemented HMIS® III
program. HMIS® is a registered mark of the American Coatings Association (ACA).
Document Group:
Issue Date:

06-4861-8
03/19/14

Version Number:
Supercedes Date:

11.00
03/21/13

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR
USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable
for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product,
some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer
may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available
directly from 3M
3M USA SDSs are available at www.3M.com

__________________________________________________________________________________________
Page 8 of 8

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Safety Data Sheet
Copyright,2015,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:
Issue Date:

11-4628-1
04/24/15

Version Number:
Supercedes Date:

34.02
10/20/14

SECTION 1: Identification
1.1. Product identifier
3M™ Cable Preparation Kit CC-3 (Bag)
Product Identification Numbers
78-8018-9838-4, 80-6105-9300-8, 80-6116-0612-2
1.2. Recommended use and restrictions on use
Recommended use
Electrical, Solvent soaked pads for cleaning cable.
1.3. Supplier’s details
MANUFACTURER:
DIVISION:
ADDRESS:
Telephone:

3M
Electrical Markets Division
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification
2.1. Hazard classification
Flammable Liquid: Category 4.
Skin Corrosion/Irritation: Category 2.
Skin Sensitizer: Category 1.
Specific Target Organ Toxicity (central nervous system): Category 3.
2.2. Label elements
Signal word
Warning
Symbols
Exclamation mark |
Pictograms

__________________________________________________________________________________________
Page 1 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Hazard Statements
Combustible liquid.
Causes skin irritation.
May cause an allergic skin reaction.
May cause drowsiness or dizziness.
Precautionary Statements
Prevention:
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves.
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
Response:
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF ON SKIN: Wash with plenty of soap and water.
If skin irritation or rash occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Call a POISON CENTER or doctor/physician if you feel unwell.
In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to
extinguish.
Storage:
Store in a well-ventilated place. Keep container tightly closed.
Keep cool.
Store locked up.
Disposal:
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3. Hazards not otherwise classified
None.

SECTION 3: Composition/information on ingredients
Ingredient
Isoparaffinic Hydrocarbon
Cotton pads
D-LIMONENE

C.A.S. No.
64742-48-9
None
5989-27-5

% by Wt
50 - 70
25 - 40
5 - 20

SECTION 4: First aid measures
4.1. Description of first aid measures

__________________________________________________________________________________________
Page 2 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop,
get medical attention.
Eye Contact:
No need for first aid is anticipated.
If Swallowed:
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable

SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.
5.2. Special hazards arising from the substance or mixture
Closed containers exposed to heat from fire may build pressure and explode.
5.3. Special protective actions for fire-fighters
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools.
Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for
information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Contain spill. Cover spill area with a fire-extinguishing foam. An appropriate aqueous film forming foam (AFFF) is
recommended. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard.
Collect as much of the spilled material as possible using non-sparking tools. Place in a metal container approved for
transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized
person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the
container. Dispose of collected material as soon as possible.

SECTION 7: Handling and storage
7.1. Precautions for safe handling
__________________________________________________________________________________________
Page 3 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

For industrial or professional use only. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid
breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when
using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the
workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Avoid contact with oxidizing
agents (eg. chlorine, chromic acid etc.)
7.2. Conditions for safe storage including any incompatibilities
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Protect from sunlight. Store away from heat.
Store away from acids. Store away from oxidizing agents.

SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available
for the component.
Ingredient
C.A.S. No. Agency
Limit type
Additional Comments
Isoparaffinic Hydrocarbon
64742-48-9 Manufacturer
TWA:100 ppm
determined
ACGIH : American Conference of Governmental Industrial Hygienists
AIHA : American Industrial Hygiene Association
CMRG : Chemical Manufacturer's Recommended Guidelines
OSHA : United States Department of Labor - Occupational Safety and Health Administration
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling

8.2. Exposure controls
8.2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
Under normal use conditions, eye exposure is not expected to be significant enough to require eye protection.
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Nitrile Rubber
Polymer laminate
If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then
use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an
exposure assessment. The following protective clothing material(s) are recommended: Apron – Nitrile
Apron - polymer laminate
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
__________________________________________________________________________________________
Page 4 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors
For questions about suitability for a specific application, consult with your respirator manufacturer.

SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Solid (Lint-free cloths soaked with liquid)
General Physical Form:
Cloth pads soaked in liquid in can or bag
Specific Physical Form:
citrus-like odor
Odor, Color, Grade:
No Data Available
Odor threshold
7.0
pH
No Data Available
Melting point
380 ºF - 480 ºF
Boiling Point
144 ºF [Test Method: Closed Cup]
Flash Point
No Data Available
Evaporation rate
Not Classified
Flammability (solid, gas)
No Data Available
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
< 1 mmHg [@ 25 ºC]
Vapor Pressure
> 1 [Ref Std: AIR=1]
Vapor Density
0.76 [Ref Std: WATER=1]
Specific Gravity
Nil
Solubility in Water
No Data Available
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
1.5 centipoise
Viscosity
Approximately 740 g/l
Volatile Organic Compounds
760 g/l
VOC Less H2O & Exempt Solvents

10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Sparks and/or flames

10.5. Incompatible materials
Strong oxidizing agents
10.6. Hazardous decomposition products
Substance
Carbon monoxide

Condition
Not Specified

__________________________________________________________________________________________
Page 5 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Carbon dioxide

Not Specified

SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.
May cause additional health effects (see below).
Skin Contact:
Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain.
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Eye Contact:
Contact with the eyes during product use is not expected to result in significant irritation.
Ingestion:
Physical Blockage: Signs/symptoms may include cramping, abdominal pain, and constipation.
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
Additional Health Effects:
Single exposure may cause target organ effects:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,
nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.
Toxicological Data
If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.
Acute Toxicity
Name
Overall product
Isoparaffinic Hydrocarbon
Isoparaffinic Hydrocarbon
Isoparaffinic Hydrocarbon
D-LIMONENE

D-LIMONENE
D-LIMONENE

Route
Ingestion
InhalationVapor
Dermal
Ingestion
InhalationVapor (4
hours)
Dermal
Ingestion

Species

Value
No data available; calculated ATE > 5,000 mg/kg
LC50 estimated to be 20 - 50 mg/l

Rabbit
Rat
Mouse

LD50 > 3,000 mg/kg
LD50 > 5,000 mg/kg
LC50 > 3.14 mg/l

Rabbit
Rat

LD50 > 5,000 mg/kg
LD50 4,400 mg/kg

__________________________________________________________________________________________
Page 6 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

ATE = acute toxicity estimate
Skin Corrosion/Irritation
Name

Species

Value

Isoparaffinic Hydrocarbon
D-LIMONENE

Rabbit
Rabbit

Irritant
Mild irritant

Name

Species

Value

Isoparaffinic Hydrocarbon
D-LIMONENE

Rabbit
Rabbit

No significant irritation
Mild irritant

Species
Guinea
pig
Mouse

Value
Not sensitizing

Serious Eye Damage/Irritation

Skin Sensitization
Name
Isoparaffinic Hydrocarbon
D-LIMONENE

Sensitizing

Respiratory Sensitization
For the component/components, either no data are currently available or the data are not sufficient for classification.
Germ Cell Mutagenicity
Name

Route

Value

Isoparaffinic Hydrocarbon
Isoparaffinic Hydrocarbon

In vivo
In Vitro

D-LIMONENE
D-LIMONENE

In Vitro
In vivo

Not mutagenic
Some positive data exist, but the data are not
sufficient for classification
Not mutagenic
Not mutagenic

Carcinogenicity
Name
Isoparaffinic Hydrocarbon

Route
Dermal

Species
Mouse

Isoparaffinic Hydrocarbon

Inhalation

D-LIMONENE

Ingestion

Human
and
animal
Rat

Value
Some positive data exist, but the data are not
sufficient for classification
Some positive data exist, but the data are not
sufficient for classification
Some positive data exist, but the data are not
sufficient for classification

Reproductive Toxicity
Reproductive and/or Developmental Effects
Name

Route

Value

Species

Test Result

Isoparaffinic Hydrocarbon

Inhalation

Not toxic to development

Rat

NOAEL 2.4
mg/l

D-LIMONENE

Ingestion

Not toxic to male reproduction

Rat

D-LIMONENE

Ingestion

Rat

D-LIMONENE

Ingestion

Some positive female reproductive data
exist, but the data are not sufficient for
classification
Some positive developmental data exist,
but the data are not sufficient for
classification

NOAEL 150
mg/kg/day
NOAEL 750
mg/kg/day

Multiple
animal
species

NOAEL 591
mg/kg/day

Exposure
Duration
during
organogenesi
s
103 weeks
premating &
during
gestation
during
organogenesi
s

Target Organ(s)
Specific Target Organ Toxicity - single exposure
__________________________________________________________________________________________
Page 7 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Name

Route

Target Organ(s)

Value

Species

Test Result

Isoparaffinic Hydrocarbon

Inhalation

central nervous
system depression

May cause drowsiness or
dizziness

Human
and
animal

NOAEL Not
available

Isoparaffinic Hydrocarbon

Inhalation

respiratory irritation

Isoparaffinic Hydrocarbon

Inhalation

nervous system

D-LIMONENE

Ingestion

nervous system

Some positive data exist, but the
data are not sufficient for
classification
Some positive data exist, but the
data are not sufficient for
classification
Some positive data exist, but the
data are not sufficient for
classification

Exposure
Duration

NOAEL Not
available
Dog

NOAEL 6.5
mg/l

4 hours

NOAEL Not
available

Specific Target Organ Toxicity - repeated exposure
Name

Route

Target Organ(s)

Value

Species

Test Result

Isoparaffinic Hydrocarbon

Inhalation

nervous system

Rat

LOAEL 4.6
mg/l

Isoparaffinic Hydrocarbon

Inhalation

kidney and/or
bladder

Rat

LOAEL 1.9
mg/l

13 weeks

Isoparaffinic Hydrocarbon

Inhalation

respiratory system

90 days

Inhalation

NOAEL 5.6
mg/l

12 weeks

Isoparaffinic Hydrocarbon

Inhalation

bone, teeth, nails,
and/or hair | blood |
liver | muscles
heart

Multiple
animal
species
Rat

NOAEL 0.6
mg/l

Isoparaffinic Hydrocarbon

All data are negative

NOAEL 1.3
mg/l

90 days

D-LIMONENE

Ingestion

kidney and/or
bladder

Multiple
animal
species
Rat

LOAEL 75
mg/kg/day

103 weeks

D-LIMONENE

Ingestion

liver

Mouse

103 weeks

D-LIMONENE

Ingestion

NOAEL
1,000
mg/kg/day
NOAEL 600
mg/kg/day

Some positive data exist, but the
data are not sufficient for
classification
Some positive data exist, but the
data are not sufficient for
classification
All data are negative

Rat

Exposure
Duration
6 months

103 weeks

Aspiration Hazard
Name
Isoparaffinic Hydrocarbon
D-LIMONENE

Value
Aspiration hazard
Aspiration hazard

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

Chemical fate information

__________________________________________________________________________________________
Page 8 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.

SECTION 13: Disposal considerations
13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during
incineration processes. As a disposal alternative, Dispose of waste product in a permitted industrial waste facility. Empty
drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations
classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.
EPA Hazardous Waste Number (RCRA): Not regulated

SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.

SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - Yes

Pressure Hazard - No

Reactivity Hazard - No

Immediate Hazard - Yes

Delayed Hazard - No

15.2. State Regulations
Contact 3M for more information.

15.3. Chemical Inventories
The components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification
and Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information.
The components of this product are in compliance with the new substance notification requirements of CEPA.
The components of this material are in compliance with the provisions of the Korean Toxic Chemical Control Law. Certain
restrictions may apply. Contact the selling division for additional information.
The components of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain
restrictions may apply. Contact the selling division for additional information.
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.

15.4. International Regulations
Contact 3M for more information.

__________________________________________________________________________________________
Page 9 of 10

3M™ Cable Preparation Kit CC-3 (Bag)

04/24/15

This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: Other information
NFPA Hazard Classification
Health: 2 Flammability: 2 Instability: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
HMIS Hazard Classification
Health: *2 Flammability: 2 Physical Hazard: 0 Personal Protection: B
Hazardous Material Identification System (HMIS® III) hazard ratings are designed to inform employees of chemical hazards
in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use
and are not intended for use in emergency situations. HMIS® III ratings are to be used with a fully implemented HMIS® III
program. HMIS® is a registered mark of the American Coatings Association (ACA).
Document Group:
Issue Date:

11-4628-1
04/24/15

Version Number:
Supercedes Date:

34.02
10/20/14

__________________________________________________________________________________________
Page 10 of 10

Black EPDM Tubing (on plastic core)

05/22/15

Article Information Sheet
Copyright,2015,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not
been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health
Administration’s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: “Article”
means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during
manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and
(iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a
hazardous chemical, and does not pose a physical or health risk to employees.
Document Group:
Issue Date:

34-7684-3
05/22/15

Version Number:
Supercedes Date:

2.00
05/21/15

SECTION 1: Identification
1.1. Product identifier
Black EPDM Tubing (on plastic core)
Product Identification Numbers
LH-A100-1762-5
1.2. Recommended use and restrictions on use
Recommended use
Electrical
1.3. Supplier’s details
MANUFACTURER:
DIVISION:
ADDRESS:
Telephone:

3M
Electrical Markets Division
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)

SECTION 2: Hazard identification
This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 3: Composition/information on ingredients
Ingredient
Black EPDM tube
Phenol, 2-(2H-Benzotriazol-2-yl)-4,6-bis(1,1-

C.A.S. No.
Trade Secret*
25973-55-1

% by Wt
100
0- 2

__________________________________________________________________________________________
Page 1 of 4

Black EPDM Tubing (on plastic core)

05/22/15

dimethylpropyl)*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade
secret.

SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
No need for first aid is anticipated.
Skin Contact:
No need for first aid is anticipated.
Eye Contact:
No need for first aid is anticipated.
If Swallowed:
No need for first aid is anticipated.

SECTION 5: Fire-fighting measures
In case of fire: Use a carbon dioxide or dry chemical extinguisher to extinguish.

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Not applicable.
6.2. Environmental precautions
Not applicable.
6.3. Methods and material for containment and cleaning up
Not applicable.

SECTION 7: Handling and storage
7.1. Precautions for safe handling
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical
under normal use conditions.
7.2. Conditions for safe storage including any incompatibilities
No special storage requirements.

SECTION 8: Exposure controls/personal protection
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical
under normal use conditions. No engineering controls or personal protective equipment (PPE) are necessary.

SECTION 9: Physical and chemical properties
__________________________________________________________________________________________
Page 2 of 4

Black EPDM Tubing (on plastic core)

05/22/15

9.1. Information on basic physical and chemical properties
Solid
General Physical Form:
Black EPDM tube
Odor, Color, Grade:
Not Applicable
Odor threshold
Not Applicable
pH
No Data Available
Melting point
Not Applicable
Boiling Point
No flash point
Flash Point
Not Applicable
Evaporation rate
Not Classified
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
Not Applicable
Flammable Limits(UEL)
Not Applicable
Vapor Pressure
Not Applicable
Vapor Density
No Data Available
Density
No Data Available
Specific Gravity
Not Applicable
Solubility in Water
Not Applicable
Solubility- non-water
Not Applicable
Partition coefficient: n-octanol/ water
Not Applicable
Autoignition temperature
No Data Available
Decomposition temperature
Not Applicable
Viscosity

SECTION 10: Stability and reactivity
This material is considered to be non reactive under normal use conditions.

SECTION 11: Toxicological information
Inhalation:
No health effects are expected
Skin Contact:
No health effects are expected
Eye Contact:
No health effects are expected
Ingestion:
No health effects are expected
Additional Information:
This product, when used under reasonable conditions and in accordance with the directions for use, should not present a
health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use
may affect the performance of the product and may present potential health and safety hazards.

SECTION 12: Ecological information
This article is expected to present a low environmental risk either because use and disposal are unlikely to result in a
significant release of components to the environment or because those components that may be released are expected to have
insignificant environmental impact.

SECTION 13: Disposal considerations
__________________________________________________________________________________________
Page 3 of 4

Black EPDM Tubing (on plastic core)

05/22/15

Dispose of contents/container in accordance with the local/regional/national/international regulations.

SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.

SECTION 15: Regulatory information
Chemical Inventories
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory requirements.

SECTION 16: Other information
Document Group:
Issue Date:

34-7684-3
05/22/15

Version Number:
Supercedes Date:

2.00
05/21/15

DISCLAIMER: The information in this Article Information Sheet (AIS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and
application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or
application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer
may have resulted in errors, omissions or alterations in this information,3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the AIS available
directly from 3M.
3M USA AISs are available at www.3M.com

__________________________________________________________________________________________
Page 4 of 4

Canon Mx490 Series Online Manual 1003107 1000317360 MSDS

Navigation menu

Versions of this User Manual:

Views

Navigation