Installation Directions

2016-10-06

• Table of Contents
• 1 Introduction
  • About this Manual
  • Warranty and Liability Information
  • Safety Precautions
  • WARNINGS
• 2: Overview and Specifications
  • IQ 250/260 Overview
  • Voltage and Current Inputs
  • Ordering Information
  • Measured Values
  • Utility Peak Demand
  • Specifications
  • Compliance
  • Accuracy
• 3 Mechanical Installation
  • Introduction
  • ANSI Installation Steps
  • DIN Installation Steps
  • IQ 250/260T Transducer Installation
• 4 Electrical Installation
  • Considerations When Installing Meters
  • CT Leads Terminated to Meter
  • CT Leads Pass Through
  • Quick Connect Crimp-on Terminations
  • Voltage and Power Supply Connections
  • Electrical Connection Diagrams
• 5 Communication Installation
  • IQ 250/260 Communication
  • RS485/KYZ Output
  • Using the Power Xpert Gateway
  • IQ 250/260T Communication Information
    • Meter Connection
• 6 Using the IQ 250/260
  • Introduction
  • Understanding Meter Face Elements
  • Understanding Meter Face Buttons
  • Using the Front Panel
  • Understanding Startup and Default Displays
  • Using the Main Menu
  • Using Reset Mode
  • Entering a Password
  • Using Configuration Mode
    • Configuring the Scroll Feature
    • Configuring CT Setting
    • Configuring PT Setting
    • Configuring Connection Setting
    • Configuring Communication Port Setting
  • Using Operating Mode
  • Understanding the % of Load Bar
  • Performing Watt-Hour Accuracy Testing
• 7 Using the I/O Option Cards
  • Overview
  • Installing Option Cards
  • Digital Output/Digital Input Card
  • Pulse Output/Digital Input Card
  • 1mA Output Card
  • 20mA Output Card
• 8 Programming the IQ 250/260
  • Overview
  • Connecting to the IQ 250/260
  • Accessing the IQ 250/260 Device Profile
  • Performing Tasks
    • Configuring Settings
      • Configuring CT, PT Ratios and System Hookup
      • Configuring Time Settings
      • Configuring System Settings
      • Configuring Communications Settings
      • Setting Display Configuration
      • Configuring Energy, Power Scaling, and Averaging
      • Configuring Limits
      • Configuring Trending Profile
      • Viewing Log Status/Retrieving Logs
        • Using the Log Viewer
    • Configuring I/O Option Cards
      • Configuring a Relay Output/Digital Input Card
      • Configuring a Pulse Output/Digital Input Card
      • Configuring a 0-1mA Output Card
      • Configuring a 4-20mA Output Card
    • Polling the IQ 250/260 Meter
      • Instantaneous Polling
      • Poll Max and Min Readings
      • Poll Power and Energy
      • Poll Phasors
      • Poll Status Inputs
      • Poll Limits
    • Using the Tools Menu
      • Accessing the Device Profile Screen
      • Setting Device Time
      • Resetting Device Information
      • Retrieving Device Status
      • Performing Manual Relay Control
      • Performing Firmware Flash Update
    • Performing Additional Software Tasks
      • Using Connection Manager
      • Disconnecting from an IQ 250/260
      • Changing the Primary Device/Address
      • Merging Connection Databases
      • Using the Options Screen
• Appendix A Navigation Maps
  • Introduction
  • Navigation Maps
    • Main Menu Screens
    • Operating Mode Screens
    • Reset Mode Screens
    • Configuration Mode Screens
• Appendix B Modbus Map
  • Introduction
  • Modbus Register Map SEction
  • Floating Point Values
  • Important Note Concerning the Meter's Modbus Map
  • Hex Representation
  • Decimal Representation
  • Retrieving Logs Using the Meter with Option L
    • Log Retrieval Procedure
    • Log Record Interpretation
    • Sample Historical Log Record
  • Modbus Map
• Appendic C Using DNP Mapping
  • Overview
  • Physical Layer
  • Data Link Layer
  • Application Layer
  • Error Reply
  • DNP Register Map