2400 & 2400D Series Raceway Cut Sheet Brochure

99654-Brochure 99654-Brochure 99654-Brochure 786776 Batch7 unilog cesco-content

: Pdf 100038-Brochure 100038-Brochure 786776 Batch6 unilog

Open the PDF directly: View PDF .
Page Count: 12

158783

2400® & 2400D®

Series Steel Raceway

F E A T U R E S & B E N E F I T S

ED874R19 – Updated January 2010 – For latest specs visit www.legrand.us/wiremold

Wiremold 2400 Series Raceway is a single

compartment raceway designed for

communication or power applications and

ideal for use in classrooms, offices, and hotel

applications, or anywhere a small low profile

raceway is needed.

2400D Series Divided Raceway is a low

profile steel raceway for use where a limited

number of power and low voltage cables are

required in the same raceway.

Low Profile, Single and Dual Channel, Steel Raceway

nSteel raceway. Provides superior strength for any

dry location.

nSingle- and dual-compartment attractive low profile

raceway design. Provides functionality and flexibility

with aesthetics for single or dual service applications.

nDownward facing activations. Streamlines the raceway

appearance and provides increased protection for both

activations and cabling.

nScuffCoat™finish. Tough durable ScuffCoat finish

makes a scratch-resistant surface that can be painted.

nComplete line of fittings. Provides complete wiring solution

and allows for interconnection between raceway systems.

nRemovable cover. Allows easy access to wiring for changes

and additions.

nOne- and two-gang device boxes. Now you can wire

devices into the raceway system, making 2400 Series

Raceway an excellent choice for communication wiring.

nOver the raceway boxes. Provides tremendous labor

savings. Boxes mount over continuous run of raceway base

eliminating the need to cut raceway when locating devices.

nBend radius control fittings. Corner and tee fittings are UL

verified to maintain full capacity 2" [51mm] bend radius

control and exceed the recommendations of EIA/TIA 569A.

These fittings provide cable protection in both lay-in and

pull-through cable installations.

nV2475D Bridge Fitting. Provides ability to bridge

2400 Series Raceways over existing installations of 2400,

700, and 500 Series Raceways.

nIn-line field-configurable receptacles. Receptacles can

be installed at any point along the raceway without a box.

nIn-line 106 frame data outlet. A wide variety of data

modules can be installed anywhere along the raceway

run without a box.

nDatacom connectivity options. Accepts industry standard

and proprietary devices from a wide range of manufacturers

to provide a seamless and aesthetically pleasing interface for

voice, data, audio, and video applications at the point of use.

nUL and cUL Listed component raceways. File E4376

Guide RJBT, Fittings: File E41751 Guide RJPR. Meets

Article 386 of NEC and meets Section 12-600 of CEC.

24DWNR Downward Facing

Activation shown in a

security application.

2400 Series Raceway shown with our

new 2444D-2N Divided Device Box in

a typical classroom application.

2400 Series Raceway shown with our new

Downward Facing Receptacles in

a typical school library application.

Now compatible with A/V devices.

2

2400 Series Raceway System Layout (Power Applications)

NOTE: Illustration is for product applications and may not represent proper circuit wiring.

Color prefix is not included in part number identification.

1500

2600

2686FO

2415M

2406

4089

4000

2426

2448-2

24DWND

24DWNR

2418M

2448

2400

2427 Series

Receptacles

24S36066BX99IV

2411M

5747

500

2489

2417M

2410C

2451H

2400 Series Raceway System Layout (Communication Applications)

2686FO

2448

2400BC

2411FO

2448-2

2418FO

2451H

2407 Series

106 Frame

4000

4089

5744

2417FO

2489

2410C

2415FO

2406 24DWND

24DWNR

500

NOTE: Illustration is for product applications and may not represent proper circuit wiring.

Color prefix is not included in part number identification.

3

2400 Series Raceway Wire Fill Capacity Charts

NUMBER OF CONDUCTORS (40% FILL)

WIRE SIZE O.D. WITHOUT WITH 2427

THHN/THWN Inches [mm] DEVICES RECEPTACLE

14 AWG 0.111 [2.8] 57 12

12 AWG 0.130 [3.3] 41 9

10 AWG 0.164 [4.2] 26 –

CABLE O.D. (Approx Dia.)

TYPE CABLE/WIRE SIZE Inches [mm] 40% FILL**

UNSHIELDED 4-Pair, 24 AWG, Cat 3 0.190 [4.8] 19

TWISTED PAIR 4-Pair, 24 AWG, Cat 5e 0.210 [5.3] 16

4-Pair, 24 AWG, Cat 6 0.250 [6.3] 11

4-Pair, 24 AWG, Cat 6a 0.354 [8.9] 5

25-Pair, 24 AWG 0.410 [10.4] 4

COAXIAL RG6/U 0.270 [6.9] 9

FIBER ZipCord 0.118 x 0.236 [3 x 6] 20

Round 4 Strand Fiber 0.187 [4.8] 20

Round 6 Strand Fiber 0.256 [6.5] 10

2400 Raceway Wire Fill Capacities for Communications

2400 Raceway Wire Fill Capacities for Power*

7/8"

[22mm]

1 29/32"

[48mm]

1.39in2

[897mm2]

2400

Catalog No./Item Description/Specifications

V2400B Raceway Base – .040" [1.0mm]

V2400B-10 steel; packed twenty 5' [1.5m]

2400B-FW lengths per carton, or ten 10'

2400B-10FW [3.0m] lengths per carton.

V2400BC Raceway Base & Cover – .040"

2400BC-FW [1.0mm] steel. Packed ten 5' [1.5m]

lengths of base and cover

per carton.

Catalog No./Item Description/Specifications

V2400C Raceway Cover – .040" [1.0mm]

2400C-FW steel; packed twenty 5' [1.5m]

lengths per carton.

624 2400 Raceway Base & Cover

Cutter – Portable cutter for 2400

& 2400D Series Raceway Base and

Cover. Provides a clean and easy

square cut every time.

624BCK Replacement Blade Kit –

Replacement blades and die

set for 624 Cutter.

IWE-S

Spray Paint – Used for touching

DVWE-S

up large areas. Available in Ivory

(IWE-S) or Fog White (DVWE-S).

Contains 12 oz. of paint.

IWE-P

Touch-Up Paint Pen – Used for

DVWE-P

touching up small areas. Available

in Ivory (IWE-P) or Fog White

(DVWE-P). Contains 0.3 oz. of paint.

1 29/32"

[48mm]

1 29/ 32"

[48mm]

2400 Series Raceway Base & Cover Ordering Information

7/8"

[22.2mm]

1

29/32"

[48mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

*For additional information refer to Technical Section of Wiremold Product Guide.

NOTE:

Can only be shipped via

ground transportation.

Catalog No./Item Description/Specifications

V2410FC Full Capacity Entrance

2410FC-FW End Fitting – Feeds 2400

Series Raceway. Includes three

3/4" and 1" concentric trade

size KOs.

V2411FO Radiused Flat Elbow –

2411FO-FW 90° flat corner that provides 2"

[51mm] cable bend radius control

for fiber optic and UTP/STP cable

installations. Ideal for lay-in or

pull-through installations.

Couplings included.

V2411M Flat Elbow – Makes right angle

2411M-FW turns in runs of 2400 Series

Raceway on same surface.

V2415FO Radiused Tee – Branches at

2415FO-FW right angles. Provides a controlled

2" [51mm] cable bend radius control

for fiber optic and UTP/STP cable

installations. Couplings included.

V2415M Tee – Branches at right angles.

2415M-FW Couplings included.

V2417FO Radiused Internal Elbow –

2417FO-FW 90° internal corner. Provides a

controlled 2" [51mm] cable bend

radius control for fiber optic and

UTP/STP cable installations.

Couplings included.

4

4"

[102mm]

Catalog No./Item Description/Specifications

2400WC Wire Clip – Additional support

for conductors in 2400 Series

Raceway. (Nonmetallic)

2401 Coupling – Joins sections

of 2400B Base.

V2406 Cover Clip – Covers joints

2406-FW where sections of 2400 Series

Raceway cover or base come

together. Nonmetallic construction.

2409 Ground Clamp – Connects

equipment grounding conductor to

2400 Series Raceway. No. 10

ground screw provided.

V2410A Entrance End Fitting – Connects

2410A-FW 2400 Series Raceway with 1/2"

trade size conduit or armored cable.

V2410B Blank End Fitting – Closes off

2410B-FW open end of 2400 Series Raceway.

V2410C Entrance End Fitting – Feeds

2410-FW 2400 Series Raceway. Includes

1/2" and 3/4" trade size KOs on end

and bottom. Additional 1/2" trade

size KO on both sides.

V2410DFO Divided Entrance End Fitting –

2410DFO-FW Feeds 2400 & 2400D Series

Raceway. Includes 1/2", 3/4",

and 1" trade size KOs on back

and end. Removable divider and

bend radius control insert included.

1"

[25mm]

1 1/2"

[38mm]

1/2"

[12.7mm]

2"

[51mm]

1 5/8"

[41mm]

1 3/16"

[30mm]

1 3/16"

[30mm]

2"

[51mm]

2400 Series Raceway Fittings Ordering Information

5 1/2"

[140mm]

3/8"

[9.5mm]

6 1/2"

[165mm]

2 11/16"

[68mm]

1 7/8"

[48mm]

2 1/8"

[54mm]

4 3/4"

[121mm]

2 7/8"

[73mm]

7 1/8"

[181mm]

2 5/8"

[67mm]

3"

[76mm]

2 1/4"

[57mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color.

10"

[254mm]

5 7/8"

[149mm]

8"

[203mm]

4 7/8"

[124mm]

4"

[102mm]

3 15/16"

[100mm]

1 29/32"

[49mm]

5

Catalog No./Item Description/Specifications

V2444 Extra Deep Device Box –

2444-FW One-gang device box has extra

depth to permit installation of

cabling that requires greater bend

radius and storage. Cover has one

twistout for 2400 Series Raceway

on two sides and one twistout for

500 and 700 Series Raceway on the

top and bottom. Accepts industry

standard faceplates for electrical

and communication devices.

V2444D Device Box – One-gang, labor

2444D-FW saving, over-the- raceway box

for use with 2400 Series Raceway.

Cover has two twistouts for 2400

Series Raceway. Accepts industry

standard faceplates for electrical

and communication devices.

V2444-2 Extra Deep Device Box – Two-

2444-2FW gang device box has extra depth to

permit installation of cabling that

requires greater bend radius and

storage. Cover has four twistouts

for 2400 Series Raceway. Base

includes knockout to enable

extension from existing single-gang

flush wall box and 1/2" and 1"

concentric trade size KOs. Accepts

industry standard faceplates for

electrical and communication

devices.

V2444-2LS Device Box – Two-gang,

2444-2LSFW labor saving, over-the-raceway box

for use with 2400 Series Raceway.

Cover has four twistouts for 2400

Series Raceway. Accepts industry

standard faceplates for electrical

and communication devices.

V24DWNU Downward Extron®MAAP

24DWNU-FW Device Plate – Labor saving,

over-the-raceway device plate.

Accepts two Extron®Electronics

MAAP single space modules.

Catalog No./Item Description/Specifications

V2417M Internal Elbow –

2417M-FW Makes 90° internal corners in runs

of 2400 Series Raceway.

V2418FO Radiused External Elbow –

2418FO-FW 90° external elbow. Provides a

controlled 2" [51mm] cable bend

radius control for fiber optic

and UTP/STP cable installations.

Couplings included.

V2418M External Elbow – Makes 90°

2418M-FW external corners in runs of 2400

Series Raceway.

V2426 Lamp Holder – Medium

2426-FW base lamp holder 660W, 250V.

Black general purpose phenolic.

V24DWND Downward Duplex Device

24DWND-FW Bracket – Labor saving,

over-the-raceway device bracket.

For 15A or 20A duplex receptacles

or 106 style data frame in 2400

Series Raceway.

V24DWNR Downward Decorator

24DWNR-FW Device Bracket – Labor saving

over-the-raceway device bracket.

For 15A or 20A decorator / GFCI

receptacles or 106 style data frame

in 2400 Series Raceway.

2400 Series Raceway Fittings Ordering Information (continued)

5"

[127mm]

1 3/4"

[45mm]

1 29/32"

[49mm]

5"

[127mm]

1 9/16"

[40mm]

1 29/32"

[49mm]

3"

[76mm]

1 1/4"

[32mm]

4 5/8"

[117mm] 2 7/8"

[73mm]

2 3/4"

[70mm]

2 3/4"

[70mm]

2 7/8"

[73mm]

4 5/8"

[117mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

4 3/4"

[120mm]

2 1/8"

[54mm]

4 3/4"

[120mm]

2 1/8"

[54mm]

2 3/4"

[70mm]

4 3/4"

[121mm] 4 3/4"

[121mm]

2 3/4"

[70mm]

4 3/4"

[121mm]

4 3/4"

[121mm]

2 1/8"

[54mm]

Catalog No./Item Description/Specifications

V2489TB Transition Box – Connects

existing installations of 2100 Series

Raceway to 2400 Series Raceway.

2686FO Transition Feed Fitting –

Eliminates offsetting of 2400 Series

Raceway in connecting with

surface panel boxes. Has 3/4"

and 1" concentric trade size KOs

with 1" trade size KO elongated so

adjustment from surface to center

of bushing is 1" [25mm] minimum

to 1 5/8" [41mm] maximum. Has

twistouts for transition to 1500 and

2600 Series Pancake Raceways.

V4089 Reducing Connector – Reduces

and connects 4000 Series Raceway

to 2400 Series Raceway.

V2407-2CM 106 Device Bracket and Frame –

2407-2CMFW Installs two network wiring

keystone device modules in 2400

Series Raceway. Does not support

Quad 106 Frame.

V2407-2TJ 106 Device Bracket and Frame –

2407-2TJFW Installs two Ortronics TracJack

device modules in 2400 Series

Raceway. Does not support

Quad 106 Frame.

2 1/16"

[52mm] 6"

[152mm]

2 1/16"

[52mm] 6"

[152mm]

6

Catalog No./Item Description/Specifications

V24DWNS Downward Ortronics®Series II

24DWNS-FW Device Plate – Labor saving,

over-the-raceway device plate.

Accepts one Ortronics®Series II

module.

V2448 Device Box – One-gang device

2448-FW box. Cover has one twistout for

2400 Series Raceway on two sides

and one twistout for 500 and 700

Series Raceway on the top and

bottom. Base includes knockout to

enable extension from existing

single-gang flush wall box and 1/2"

trade size KOs. Accepts industry

standard faceplates for electrical

and communication devices.

V2448-2 Device Box – Two-gang device

2448-2FW box. Cover has four twistout for

2400 Series Raceway. Base

includes knockout to enable

extension from existing single-gang

flush wall box and 1/2" trade size

KOs. Accepts industry standard

faceplates for electrical and

communication devices.

V2451H Back Feed Fitting – Feeds 2400

2451H-FW Series Raceway from an existing

outlet box. Equipped with 1/2"

trade size male bushing and lock

nut washer for grounding.

V2475D Bridge Fitting – Allows 2400 Series

2475D-FW Raceway to bridge over existing

installations of 2400, 500, or 700

Series Raceways.

V2489 Side Reducing Connector –

Connects 2400 Series Raceway

with 500 Series Raceway.

1 3/4"

[44mm]

4 3/4"

[121mm] 4 3/4"

[121mm]

2"

[51mm]

2400 Series Raceway Fittings Ordering Information (continued)

4 3/4"

[121mm]

1 5/8"

[41mm]

2"

[51mm]

4 1/2"

[114mm]

4 1/2"

[114mm]

2 1/2"

[63mm]

3 5/8"

[92mm]

4 5/8"

[117mm] 2 7/8"

[73mm]

1 3/4"

[44mm]

5 9/16"

[140mm]

1 7/8"

[48mm]

2 7/8"

[74mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color.

4 5/8"

[117mm]

2 7/8"

[173mm]

1 3/4"

[44mm]

2100

2400

4 3/4"

[121mm]

2 1/8"

[54mm]

7

Catalog No./Item Description/Specifications

V2407-3TJ 106 Device Bracket and Frame –

2407-3TJFW Installs three Ortronics TracJack

device modules in 2400 Series

Raceway. Does not support

Quad 100 Frame.

V2427GA 15A Duplex Receptacle – 3-Wire

125V NEMA 5-15R receptacle

provided with 10-1/2" [267mm]

pigtails and inline splice connectors.

V2427GT 20A Duplex Receptacle – 3-Wire

125V NEMA 5-20R receptacle

provided with 10-1/2" [267mm]

pigtails and inline splice connectors.

Catalog No./Item Description/Specifications

IG2427GA 15A Isolated Ground Duplex

Receptacle – 3-Wire 125V NEMA

5-15R orange receptacle provided

with 10-1/2" [267mm] pigtails and

inline splice connectors.

IG2427GT 20A Isolated Ground Duplex

Receptacle – 3-Wire 125V

NEMA 5-20R orange receptacle

provided with 10-1/2" [267mm]

pigtails and inline splice

connectors.

2400 Series Raceway Receptacles Ordering Information

2 1/16"

[52mm]

4 1/2"

[114mm]

2 1/16"

[52mm]

4 1/2"

[114mm] 2 1/16"

[52mm]

4 1/2"

[114mm]

2 1/16"

[52mm]

4 1/2"

[114mm]

2 1/16"

[52mm] 6"

[152mm]

2400 Series Divided Raceway System Layout for Power & Data

4000

4089

2418DFO

2444

2410DFO

2444D-2A

2417DFO

2415DFO

2400D

V2400D

24DWND

24DWNR

2411DFO

2444D

NOTE: Illustration is for product applications and may not represent proper circuit wiring.

Color prefix is not included in part number identification.

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

8

WIRE SIZE O.D.

NUMBER OF CONDUCTORS (40% FILL)

THHN/THWN Inches [mm] 1/3 COMP. 2/3 COMP.

14 AWG 0.111 [2.8] 11 26

12 AWG 0.130 [3.3] 9 19

10 AWG 0.164 [4.2] 6 11

2400 Series Divided Raceway Wire Fill Capacities for Power

7/8"

[22mm] .864in.2

[558mm2]

.374in.2

[241mm2]

1 29/32"

[48mm]

2400D

CABLE O.D. (Approx Dia.) 1/3 COMPARTMENT 2/3 COMPARTMENT

TYPE CABLE/WIRE SIZE Inches [mm] 40% FILL 40% FILL**

UNSHIELDED 4-Pair, 24 AWG, Cat 3 0.190 [4.8] 5 12

TWISTED PAIR 4-Pair, 24 AWG, Cat 5e 0.210 [5.3] 49

4-Pair, 24 AWG, Cat 6 0.250 [6.3] 37

4-Pair, 24 AWG, Cat 6a 0.354 [8.9] 13

25-Pair, 24 AWG 0.410 [10.4] 12

COAXIAL RG6/U 0.270 [6.9] 26

FIBER ZipCord 0.118 x 0.236 [3 x 6] 5 12

Round 4 Strand Fiber 0.187 [4.8] 5 12

Round 6 Strand Fiber 0.256 [6.5] 26

2400 Series Divided Raceway Wire Fill Capacities for Communications

*For additional information refer to Technical Section of Wiremold Product Guide.

Catalog No./Item Description/Specifications

V2400BD Divided Raceway Base – .040"

2400BD-FW [1.0mm] steel; divided into 1/3 and

2/3 compartments. Packed ten 10'

[3.0m] lengths per carton.

V2400C Raceway Cover – .040" [1.0mm]

2400C-FW steel; packed twenty 5' [1.5m]

lengths per carton.

Catalog No./Item Description/Specifications

624 2400 Raceway Base & Cover

Cutter – Portable cutter for 2400 &

2400D Series Raceway Base and

Cover. Provides a clean and easy

square cut every time.

624BCK Replacement Blade Kit –

Replacement blades and die

set for 624 Cutter.

IWE-S

Spray Paint – Used for touching

DVWE-S

up large areas. Available in Ivory

(IWE-S) or Fog White (DVWE-S).

Contains 12 oz. of paint.

IWE-P

Touch-Up Paint Pen – Used for

DVWE-P

touching up small areas. Available

in Ivory (IWE-P) or Fog White

(DVWE-P). Contains 0.3 oz. of paint.

1 29/32"

[48mm]

1 29/ 32"

[48mm]

2400 Series Divided Raceway Base & Cover Ordering Information

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

2400 Series Divided Raceway Wire Fill Capacities

NOTE:

Can only be shipped via

ground transportation.

9

Catalog No./Item Description/Specifications

2400WC Wire Clip – Additional support

for conductors in 2400D Series

Raceway. (Nonmetallic)

2401D Divided Coupling – Joins sections

of 2400DB Divided Base.

V2406 Cover Clip – Covers joints

2406-FW where sections of 2400 Series

Raceway cover or base come

together. Nonmetallic construction.

V2410BD Divided Blank End Fitting – Closes

2410BD-FW off open end of 2400D

Series Raceway.

V2410D Divided Entrance End Fitting –

2410D-FW Feeds 2400D Series Raceway.

Two 1/2" trade size KOs and two

rectangular KOs for communication

cabling. Two additional 1" and 3/4"

concentric trade size KOs on sides.

V2410DFO Divided Entrance End Fitting –

2410DFO-FW Feeds 2400 & 2400D Series

Raceway. Includes 1/2", 3/4",

and 1" trade size KOs on back

and end. Removable divider and

bend radius control insert included.

V2411D Divided Flat Elbow – Makes

2411D-FW right angle turns in runs of 2400D

Series Raceway on same surface.

Catalog No./Item Description/Specifications

V2411DFO Radiused Divided Flat Elbow –

2411DFO-FW 90° flat elbow with integral

dividers to provide 2" [51mm] full

capacity cable bend radius control

for fiber optic and UTP/STP cable

installations. Ideal for lay-in or

pull-through installations.

Couplings included.

V2415DFO Radiused Divided Tee –

2415DFO-FW For branches at right angles.

Provides 2" [51mm] full capacity

cable bend radius control for fiber

optic and UTP/STP cable

installations. Couplings included.

V2417D Divided Internal Elbow –

2417D-FW Makes internal 90° corners in runs

of 2400D Series Raceway.

V2417DFO Radiused Divided Internal Elbow –

2417DFO-FW 90° internal corner. Provides a

2" [51mm] full capacity cable bend

radius control for fiber optic

and UTP/STP cable installations.

Couplings included.

V2418DFO Radiused Divided External

2418DFO-FW Elbow – 90° external elbow.

Provides a 2" [51mm] full capacity

cable bend radius control for fiber

optic and UTP/STP cable

installations. Couplings included.

6 1/2"

[165mm]

5 1/2"

[140mm]

3/8"

[9.5mm]

2400 Series Divided Raceway Fittings (continued)

1 3/16"

[30mm]

4"

[102mm]

5"

[127mm]

10"

[254mm]

5 7/8"

[149mm]

8"

[203mm]

4 7/8"

[124mm]

4 3/4"

[121mm]

2 7/8"

[73mm]

7 1/8"

[181mm]

2 5/8"

[67mm]

3"

[76mm]

2 1/4"

[57mm]

3 15/16"

[100mm]

1 29/32"

[49mm]

1 3/4"

[45mm]

1 29/32"

[49mm]

1 1/2"

[38mm]

2"

[51mm]

1"

[25mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

10

Catalog No./Item Description/Specifications

V24DWND Downward Duplex Device

24DWND-FW Bracket – Labor saving over-the-

raceway device bracket. For 15A

or 20A duplex receptacles or

106 style data frame in 2400D

Series Raceway.

V24DWNR Downward Decorator Device

24DWNR-FW Bracket – Labor saving over-

the-raceway device bracket.

For 15A and 20A decorator/GFCI

receptacles or 106 style data frame

in 2400D Series Raceway.

V24DWNU Downward Extron®MAAP

24DWNU-FW Device Plate – Labor saving,

over-the-raceway device plate.

Accepts two Extron®Electronics

MAAP single space modules.

V24DWNS Downward Ortronics®Series II

24DWNS-FW Device Plate – Labor saving,

over-the-raceway device plate.

Accepts tone Ortronics®Series II

module.

V2444D Device Box – One-gang,

2444D-FW labor saving, over-the-raceway box

for use with 2400D Series Raceway.

Cover has two twistouts for 2400D

Series Raceway. Accepts industry

standard faceplates for electrical

and communication devices.

V2444D-2A Divided Device Box – Divided

2444D-2AFW two-gang, labor saving, over-the-

raceway box for use with 2400D

Series Raceway. Provides the ability

to have both power and low voltage

at a single point-of- use. Accepts

5507 Series Faceplates, Ortronics®

TracJack & Series II Modules

(requires S2-EPL Plate), Pass &

Seymour Activate Series Inserts

(requires CM-EPLA Plate) and

Wiremold Open System

Communication Modules (requires

CM-EPLA Plate).

2 3/4"

[70mm]

2 7/8"

[73mm]

4 5/8"

[117mm]

Catalog No./Item Description/Specifications

V2444D-2N Divided Box – Labor savings

2444D-2NFW over-the- raceway box. A divided

two-gang box for use with 2400D

Series Raceway. Allows both power

and low voltage at a single point-

of-use. For use with commercially

available faceplates (not supplied).

V2450 Device Bracket –

2450-FW For use with 2444D-2N for both

power and low voltage at a single

point of use. Accepts 5507 Series

Faceplates, Ortronics®TracJack &

Series II Modules (requires S2-EPL

Plate),Pass & Seymour Activate

Series Inserts (requires CM-EPLA

Plate) and Wiremold Open System

Communication Modules

(requires CM-EPLA Plate).

V2475D Bridge Fitting – For allowing

2475D-FW 2400D Series Raceway to bridge

over existing installations of 2400,

2400D, 500, and 700 Series

Raceways.

V4089 Reducing Connector –

For reducing from 4000

Series Raceway to 2400D

Series Raceway.

V2489TB Transition Box – Connects

existing installations of 2100 Series

Raceway to 2400D Series Raceway.

2400 Series Divided Raceway Fittings Ordering Information (continued)

4 3/4"

[121mm]

1 5/8"

[41mm]

2"

[51mm]

4 3/4"

[121mm]

4 3/4"

[121mm]

2 3/4"

[70mm]

4 5/8"

[118mm] 3/8"

[9.5mm]

4 5/8"

[118mm]

4 3/4"

[120mm]

2 1/8"

[54mm]

4 3/4"

[120mm]

2 1/8"

[54mm]

5 9/16"

[140mm]

1 7/8"

[48mm]

2 7/8"

[74mm]

NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates

Fog White color.

4 5/8"

[117mm]

2 7/8"

[173mm]

1 3/4"

[44mm]

2100

2400

4 3/4"

[121mm]

2 1/8"

[54mm]

2 3/4"

[70mm] 4 3/4"

[121mm]

4 3/4"

[121mm]

2 1/8"

[54mm]

Catalog No./Item Description/Specifications

5507FRJ

Flush

Dual RJ11/RJ45

5507FRJ-FW Faceplate – Mounts one

or two keystone device modules,

recessed to provide a flush

installation. Has one opening and

a KO for the other.

5507AAP Extron®AAP Faceplate –

5507AAP-FW Accepts two Extron®Electronics

AAP single space modules.

5507MAAP Extron®MAAP Faceplate –

5507MAAP-FW Accepts two Extron®Electronics

MAAP single space modules.

5507-4TJ Ortronics®Faceplate –

5507-4TJFW Mounts Ortronics datacom inserts.

Accepts four TracJack Devices.

5507-6TJ Ortronics®Faceplate –

5507-6TJFW Mounts Ortronics datacom inserts.

Accepts six TracJack Devices.

CM-EPLA End Plates – Mounts Pass &

CM-EPLA-FW Seymour Activate and Wiremold

Open System communication

modules into 5507 Series

Faceplates. Includes two outlet

identification labels with clear

covers and two matching

screw covers.

S2-EPL End Plates – Mounts Ortronics

S2-EPL-FW Series II modules into 5507 Series

Faceplates. Includes two outlet

identification labels with clear

covers and two matching

screw covers.

11

NOTE: All faceplates have a standard measurement of 4 1/4" x

1 7/8" [108mm x 34mm].

Part number without prefix indicates Ivory color,

“-FW” suffix indicates Fog White color.

Catalog No./Item Description/Specifications

5507AD

Modular Furniture Adapter –

5507AD-FW Accepts Activate modular

furniture bezel and other modular

furniture adapters.

5507B Blank Faceplate – Covers

5507B-FW unused compartments in the

device bracket.

5507D Duplex Faceplate – Covers

5507D-FW duplex style devices. Accepts

106 Frame.

5507R Rectangular Faceplate –

5507R-FW Covers rectangular style devices.

5507S Rectangular Spacer – Mounts

commercial device plates. Installs

between the device bracket and

a device.

5507SW Switch Faceplate – Covers

5507SW-FW standard toggle switches.

5507T1 Single Receptacle Faceplate –

5507T1-FW Covers single receptacles – 1.59"

[40.4mm] diameter.

5507T2 Single Receptacle Faceplate –

5507T2-FW Covers single receptacles –

1.41" [35.8mm] diameter.

5507RJ Dual RJ11/RJ45

5507RJ-FW Connector Faceplate –

Mounts one or two keystone

device modules, has one opening

and a KO for the other.

5507 Series Faceplates Ordering Information

WIREMOLD

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251

Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4

1-800-723-5175 • FAX 905-738-9721

ED874R19 – Updated January 2010 – For latest specs visit www.legrand.us/wiremold

© Copyright 2010 Legrand All Rights Reserved

Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways. They are:

• Ortronics®TracJack®and Series II Modular Connectivity Solutions

• Pass & Seymour Activate™Modular Inserts

•Open System Communication Modules

Ortronics®Connectivity

TracJack®Individual Jack System

• Front-loading, snap-in design supports future moves adds and changes

•Inserts for voice, data, audio, and video

• Available Category 3, 5e, 6, USOC 6-position, and other media

• Flat or angled 45° exit configurations

• Choice of 13 colors and color matched to Wiremold Systems

• Universal T568A/B wiring format

Series II Front-Loading, Module System

• Module design features easy snap-in front-loading design

• Linear 110 punch down format for easy termination

• Inserts for voice, data, audio, and video

• Available Category 3, 5e, 6, USOC 6-position, and other media

• Available in flat or angled 45° exit configurations

• Color matched to Wiremold Systems

For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.

Pass & Seymour Legrand Network Wiring

Activate™Series Front-Loading Inserts

• Modular inserts for voice, data, audio and video applications

• Front-load, snap-in design

• Color and texture matched to Wiremold Systems

• Available Category 3, 5e, 6, as well as 6-position USOC

• Universal T568A/B wiring format

For detailed product selection refer to the Pass & Seymour Network Wiring

Catalog or visit www.passandseymour.com.

Open Connectivity Solutions

Wiremold Open System Communications Modules

• Accommodate a wide range of manufacturers’ communications outlets including

keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX

• Modules insert into a wide range of Wiremold Systems

• Pre-punched faceplates accept common communication devices

DATACOM CONNECTIVITY OPTIONS

NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems

contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.

---

---

---

---

---

---

---

---

---

---

---

---