2400 & 2400D Series Raceway Cut Sheet Brochure
99654-Brochure 99654-Brochure 99654-Brochure 786776 Batch7 unilog cesco-content
2014-07-30
: Pdf 100038-Brochure 100038-Brochure 786776 Batch6 unilog
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
2400® & 2400D® Series Steel Raceway Low Profile, Single and Dual Channel, Steel Raceway Wiremold 2400 Series Raceway is a single compartment raceway designed for communication or power applications and ideal for use in classrooms, offices, and hotel applications, or anywhere a small low profile raceway is needed. 2400D Series Divided Raceway is a low profile steel raceway for use where a limited number of power and low voltage cables are required in the same raceway. 2400 Series Raceway shown with our new Downward Facing Receptacles in a typical school library application. FEATURES & BENEFITS n Single- and dual-compartment attractive low profile raceway design. Provides functionality and flexibility with aesthetics for single or dual service applications. n Bend radius control fittings. Corner and tee fittings are UL verified to maintain full capacity 2" [51mm] bend radius control and exceed the recommendations of EIA/TIA 569A. These fittings provide cable protection in both lay-in and pull-through cable installations. n Downward facing activations. Streamlines the raceway appearance and provides increased protection for both activations and cabling. n V2475D Bridge Fitting. Provides ability to bridge 2400 Series Raceways over existing installations of 2400, 700, and 500 Series Raceways. n ScuffCoat™ finish. Tough durable ScuffCoat finish makes a scratch-resistant surface that can be painted. n In-line field-configurable receptacles. Receptacles can be installed at any point along the raceway without a box. n Complete line of fittings. Provides complete wiring solution and allows for interconnection between raceway systems. n In-line 106 frame data outlet. A wide variety of data modules can be installed anywhere along the raceway run without a box. n Steel raceway. Provides superior strength for any dry location. n Removable cover. Allows easy access to wiring for changes and additions. n One- and two-gang device boxes. Now you can wire devices into the raceway system, making 2400 Series Raceway an excellent choice for communication wiring. n Over the raceway boxes. Provides tremendous labor savings. Boxes mount over continuous run of raceway base eliminating the need to cut raceway when locating devices. n Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. n UL and cUL Listed component raceways. File E4376 Guide RJBT, Fittings: File E41751 Guide RJPR. Meets Article 386 of NEC and meets Section 12-600 of CEC. Now compatible with A/V devices. 24DWNR Downward Facing Activation shown in a security application. 2400 Series Raceway shown with our new 2444D-2N Divided Device Box in a typical classroom application. ED874R19 – Updated January 2010 – For latest specs visit www.legrand.us/wiremold 2400 Series Raceway System Layout (Power Applications) 4000 4089 2417M 2489 2448-2 2427 Series Receptacles 2410C 2426 24DWND 24DWNR 2451H 2415M 500 2400 5747 2406 2411M 2418M 2448 24S36066BX99IV 1500 2600 2686FO NOTE: Illustration is for product applications and may not represent proper circuit wiring. Color prefix is not included in part number identification. 2400 Series Raceway System Layout (Communication Applications) 2448-2 4000 2417FO 2410C 4089 2411FO 2448 2451H 2489 500 2407 Series 106 Frame 2400BC 2415FO 2406 24DWND 24DWNR 2418FO 2686FO NOTE: Illustration is for product applications and may not represent proper circuit wiring. Color prefix is not included in part number identification. 2 5744 2400 Series Raceway Wire Fill Capacity Charts 2400 2400 Raceway Wire Fill Capacities for Power* WIRE SIZE THHN/THWN NUMBER OF CONDUCTORS (40% FILL) WITHOUT WITH 2427 DEVICES RECEPTACLE O.D. 14 AWG 12 AWG 10 AWG Inches [mm] 0.111 0.130 0.164 [2.8] [3.3] [4.2] 57 41 26 12 9 – 7/8" [22mm] 1.39in2 [897mm 2] 1 29/32" [48mm] *For additional information refer to Technical Section of Wiremold Product Guide. 2400 Raceway Wire Fill Capacities for Communications CABLE TYPE CABLE/WIRE SIZE UNSHIELDED TWISTED PAIR 4-Pair, 4-Pair, 4-Pair, 4-Pair, 25-Pair, 24 AWG, Cat 3 24 AWG, Cat 5e 24 AWG, Cat 6 24 AWG, Cat 6a 24 AWG O.D. (Approx Dia.) Inches [mm] 0.190 0.210 0.250 0.354 0.410 40% FILL** [4.8] [5.3] [6.3] [8.9] [10.4] 19 16 11 5 4 COAXIAL RG6/U 0.270 [6.9] 9 FIBER ZipCord Round 4 Strand Fiber Round 6 Strand Fiber 0.118 x 0.236 0.187 0.256 [3 x 6] [4.8] [6.5] 20 20 10 2400 Series Raceway Base & Cover Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V2400B V2400B-10 2400B-FW 2400B-10FW Raceway Base – .040" [1.0mm] steel; packed twenty 5' [1.5m] lengths per carton, or ten 10' [3.0m] lengths per carton. V2400C 2400C-FW Raceway Cover – .040" [1.0mm] steel; packed twenty 5' [1.5m] lengths per carton. 1 29/32" [48mm] 1 29/32" [48mm] V2400BC 2400BC-FW 7/8" [22.2mm] Raceway Base & Cover – .040" [1.0mm] steel. Packed ten 5' [1.5m] lengths of base and cover per carton. 1 29/32" [48mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 624 2400 Raceway Base & Cover Cutter – Portable cutter for 2400 & 2400D Series Raceway Base and Cover. Provides a clean and easy square cut every time. 624BCK Replacement Blade Kit – Replacement blades and die set for 624 Cutter. IWE-S DVWE-S Spray Paint – Used for touching up large areas. Available in Ivory (IWE-S) or Fog White (DVWE-S). Contains 12 oz. of paint. NOTE: Can only be shipped via ground transportation. IWE-P DVWE-P 3 Touch-Up Paint Pen – Used for touching up small areas. Available in Ivory (IWE-P) or Fog White (DVWE-P). Contains 0.3 oz. of paint. 2400 Series Raceway Fittings Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 2400WC Wire Clip – Additional support for conductors in 2400 Series Raceway. (Nonmetallic) V2410FC 2410FC-FW Full Capacity Entrance End Fitting – Feeds 2400 Series Raceway. Includes three 3/4" and 1" concentric trade size KOs. 1" [25mm] 2" [51mm] 2401 Coupling – Joins sections of 2400B Base. 2 1/4" [57mm] 2 5/8" [67mm] V2406 2406-FW 2409 V2411FO 2411FO-FW Cover Clip – Covers joints where sections of 2400 Series Raceway cover or base come together. Nonmetallic construction. 1 1/2" [38mm] 1/2" [12.7mm] V2410A 2410A-FW 3" [76mm] 6 1/2" [165mm] 3/8" [9.5mm] Ground Clamp – Connects equipment grounding conductor to 2400 Series Raceway. No. 10 ground screw provided. Radiused Flat Elbow – 90° flat corner that provides 2" [51mm] cable bend radius control for fiber optic and UTP/STP cable installations. Ideal for lay-in or pull-through installations. Couplings included. 5 1/2" [140mm] V2411M 2411M-FW Entrance End Fitting – Connects 2400 Series Raceway with 1/2" trade size conduit or armored cable. 1 29/32" [49mm] Flat Elbow – Makes right angle turns in runs of 2400 Series Raceway on same surface. 2" [51mm] 1 5/8" [41mm] 1 3/16" [30mm] 3 15/16" [100mm] V2410B 2410B-FW V2415FO 2415FO-FW Blank End Fitting – Closes off open end of 2400 Series Raceway. 10" [254mm] 1 3/16" [30mm] 8" [203mm] 5 7/8" [149mm] Radiused Tee – Branches at right angles. Provides a controlled 2" [51mm] cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. 4 7/8" [124mm] V2410C 2410-FW 2 11/16" 1 7/8" [68mm] [48mm] Entrance End Fitting – Feeds 2400 Series Raceway. Includes 1/2" and 3/4" trade size KOs on end and bottom. Additional 1/2" trade size KO on both sides. V2415M 2415M-FW Tee – Branches at right angles. Couplings included. 2 1/8" [54mm] 4" [102mm] V2410DFO 2410DFO-FW 4 3/4" [121mm] 2 7/8" [73mm] Divided Entrance End Fitting – Feeds 2400 & 2400D Series Raceway. Includes 1/2", 3/4", and 1" trade size KOs on back and end. Removable divider and bend radius control insert included. V2417FO 2417FO-FW 7 1/8" [181mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 4 4" [102mm] Radiused Internal Elbow – 90° internal corner. Provides a controlled 2" [51mm] cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. 2400 Series Raceway Fittings Ordering Information (continued) Catalog No./Item V2417M 2417M-FW 1 3/4" [45mm] Description/Specifications Catalog No./Item Description/Specifications Internal Elbow – Makes 90° internal corners in runs of 2400 Series Raceway. V2444 2444-FW Extra Deep Device Box – One-gang device box has extra depth to permit installation of cabling that requires greater bend radius and storage. Cover has one twistout for 2400 Series Raceway on two sides and one twistout for 500 and 700 Series Raceway on the top and bottom. Accepts industry standard faceplates for electrical and communication devices. 4 5/8" [117mm] 2 7/8" [73mm] 1 29/32" [49mm] V2418FO 2418FO-FW Radiused External Elbow – 90° external elbow. Provides a controlled 2" [51mm] cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. 5" [127mm] V2418M 2418M-FW 2 3/4" [70mm] 1 1/4" [32mm] V2444D 2444D-FW Device Box – One-gang, labor saving, over-the- raceway box for use with 2400 Series Raceway. Cover has two twistouts for 2400 Series Raceway. Accepts industry standard faceplates for electrical and communication devices. 4 5/8" [117mm] External Elbow – Makes 90° external corners in runs of 2400 Series Raceway. 2 7/8" [73mm] 2 3/4" [70mm] V2444-2 2444-2FW 3" [76mm] 4 3/4" [121mm] V2426 2426-FW 1 29/32" [49mm] Lamp Holder – Medium base lamp holder 660W, 250V. Black general purpose phenolic. 4 3/4" [121mm] 2 3/4" [70mm] 5" [127mm] 1 9/16" [40mm] V24DWND 24DWND-FW 4 3/4" [120mm] 2 1/8" [54mm] Downward Duplex Device Bracket – Labor saving, over-the-raceway device bracket. For 15A or 20A duplex receptacles or 106 style data frame in 2400 Series Raceway. V2444-2LS 2444-2LSFW Device Box – Two-gang, labor saving, over-the-raceway box for use with 2400 Series Raceway. Cover has four twistouts for 2400 Series Raceway. Accepts industry standard faceplates for electrical and communication devices. 2 3/4" [70mm] V24DWNR 24DWNR-FW 2 1/8" [54mm] 4 3/4" [120mm] Extra Deep Device Box – Twogang device box has extra depth to permit installation of cabling that requires greater bend radius and storage. Cover has four twistouts for 2400 Series Raceway. Base includes knockout to enable extension from existing single-gang flush wall box and 1/2" and 1" concentric trade size KOs. Accepts industry standard faceplates for electrical and communication devices. 4 3/4" [121mm] Downward Decorator Device Bracket – Labor saving over-the-raceway device bracket. For 15A or 20A decorator / GFCI receptacles or 106 style data frame in 2400 Series Raceway. V24DWNU 24DWNU-FW 2 1/8" [54mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 5 4 3/4" [121mm] Downward Extron® MAAP Device Plate – Labor saving, over-the-raceway device plate. Accepts two Extron® Electronics MAAP single space modules. 2400 Series Raceway Fittings Ordering Information (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V24DWNS 24DWNS-FW Downward Ortronics® Series II Device Plate – Labor saving, over-the-raceway device plate. Accepts one Ortronics® Series II module. V2489TB Transition Box – Connects existing installations of 2100 Series Raceway to 2400 Series Raceway. 4 3/4" [121mm] 2 1/8" [54mm] 2 7/8" [173mm] 4 5/8" [117mm] 1 3/4" [44mm] 2100 2400 V2448 2448-FW 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] V2448-2 2448-2FW 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] V2451H 2451H-FW 4 1/2" [114mm] 2686FO Device Box – One-gang device box. Cover has one twistout for 2400 Series Raceway on two sides and one twistout for 500 and 700 Series Raceway on the top and bottom. Base includes knockout to enable extension from existing single-gang flush wall box and 1/2" trade size KOs. Accepts industry standard faceplates for electrical and communication devices. 2 1/2" [63mm] 3 5/8" [92mm] Device Box – Two-gang device box. Cover has four twistout for 2400 Series Raceway. Base includes knockout to enable extension from existing single-gang flush wall box and 1/2" trade size KOs. Accepts industry standard faceplates for electrical and communication devices. V4089 2" [51mm] 5 9/16" [140mm] 1 7/8" [48mm] Back Feed Fitting – Feeds 2400 Series Raceway from an existing outlet box. Equipped with 1/2" trade size male bushing and lock nut washer for grounding. V2407-2CM 2407-2CMFW Bridge Fitting – Allows 2400 Series Raceway to bridge over existing installations of 2400, 500, or 700 Series Raceways. 2 1/16" [52mm] V2407-2TJ 2407-2TJFW 2 7/8" [74mm] V2489 2" [51mm] Reducing Connector – Reduces and connects 4000 Series Raceway to 2400 Series Raceway. 4 3/4" [121mm] 4 1/2" [114mm] V2475D 2475D-FW 1 5/8" [41mm] Transition Feed Fitting – Eliminates offsetting of 2400 Series Raceway in connecting with surface panel boxes. Has 3/4" and 1" concentric trade size KOs with 1" trade size KO elongated so adjustment from surface to center of bushing is 1" [25mm] minimum to 1 5/8" [41mm] maximum. Has twistouts for transition to 1500 and 2600 Series Pancake Raceways. Side Reducing Connector – Connects 2400 Series Raceway with 500 Series Raceway. 2 1/16" [52mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 6 106 Device Bracket and Frame – Installs two network wiring keystone device modules in 2400 Series Raceway. Does not support Quad 106 Frame. 6" [152mm] 106 Device Bracket and Frame – Installs two Ortronics TracJack device modules in 2400 Series Raceway. Does not support Quad 106 Frame. 6" [152mm] 2400 Series Raceway Receptacles Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V2407-3TJ 2407-3TJFW 106 Device Bracket and Frame – Installs three Ortronics TracJack device modules in 2400 Series Raceway. Does not support Quad 100 Frame. IG2427GA 15A Isolated Ground Duplex Receptacle – 3-Wire 125V NEMA 5-15R orange receptacle provided with 10-1/2" [267mm] pigtails and inline splice connectors. 4 1/2" [114mm] 2 1/16" [52mm] 2 1/16" [52mm] 6" [152mm] V2427GA 15A Duplex Receptacle – 3-Wire 125V NEMA 5-15R receptacle provided with 10-1/2" [267mm] pigtails and inline splice connectors. 2 1/16" [52mm] V2427GT IG2427GT 4 1/2" [114mm] 2 1/16" [52mm] 20A Duplex Receptacle – 3-Wire 125V NEMA 5-20R receptacle provided with 10-1/2" [267mm] pigtails and inline splice connectors. 2 1/16" [52mm] 20A Isolated Ground Duplex Receptacle – 3-Wire 125V NEMA 5-20R orange receptacle provided with 10-1/2" [267mm] pigtails and inline splice connectors. 4 1/2" [114mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 4 1/2" [114mm] 2400 Series Divided Raceway System Layout for Power & Data 2444D 2417DFO 2415DFO 2410DFO 4000 24DWND 24DWNR 4089 2444 2400D 2444D-2A 2411DFO 2418DFO V2400D NOTE: Illustration is for product applications and may not represent proper circuit wiring. Color prefix is not included in part number identification. 7 2400 Series Divided Raceway Wire Fill Capacities 2400 Series Divided Raceway Wire Fill Capacities for Power WIRE SIZE THHN/THWN O.D. 14 AWG 12 AWG 10 AWG Inches [mm] 0.111 0.130 0.164 [2.8] [3.3] [4.2] 2400D NUMBER OF CONDUCTORS (40% FILL) 1/3 COMP. 2/3 COMP. 11 9 6 7/8" [22mm] 26 19 11 .864in.2 [558mm2] 1 29/32" [48mm] .374in.2 [241mm2] *For additional information refer to Technical Section of Wiremold Product Guide. 2400 Series Divided Raceway Wire Fill Capacities for Communications CABLE TYPE CABLE/WIRE SIZE UNSHIELDED TWISTED PAIR 4-Pair, 4-Pair, 4-Pair, 4-Pair, 25-Pair, 24 AWG, Cat 3 24 AWG, Cat 5e 24 AWG, Cat 6 24 AWG, Cat 6a 24 AWG COAXIAL RG6/U FIBER ZipCord Round 4 Strand Fiber Round 6 Strand Fiber O.D. (Approx Dia.) Inches [mm] 0.190 0.210 0.250 0.354 0.410 1/3 COMPARTMENT 40% FILL [4.8] [5.3] [6.3] [8.9] [10.4] 2/3 COMPARTMENT 40% FILL** 5 4 3 1 1 12 9 7 3 2 0.270 [6.9] 2 6 0.118 x 0.236 0.187 0.256 [3 x 6] [4.8] [6.5] 5 5 2 12 12 6 2400 Series Divided Raceway Base & Cover Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V2400BD 2400BD-FW Divided Raceway Base – .040" [1.0mm] steel; divided into 1/3 and 2/3 compartments. Packed ten 10' [3.0m] lengths per carton. 624 2400 Raceway Base & Cover Cutter – Portable cutter for 2400 & 2400D Series Raceway Base and Cover. Provides a clean and easy square cut every time. Raceway Cover – .040" [1.0mm] steel; packed twenty 5' [1.5m] lengths per carton. 624BCK Replacement Blade Kit – Replacement blades and die set for 624 Cutter. IWE-S DVWE-S Spray Paint – Used for touching up large areas. Available in Ivory (IWE-S) or Fog White (DVWE-S). Contains 12 oz. of paint. 1 29/32" [48mm] V2400C 2400C-FW 1 29 / 32" [48mm] NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. NOTE: Can only be shipped via ground transportation. IWE-P DVWE-P 8 Touch-Up Paint Pen – Used for touching up small areas. Available in Ivory (IWE-P) or Fog White (DVWE-P). Contains 0.3 oz. of paint. 2400 Series Divided Raceway Fittings (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 2400WC Wire Clip – Additional support for conductors in 2400D Series Raceway. (Nonmetallic) V2411DFO 2411DFO-FW Radiused Divided Flat Elbow – 90° flat elbow with integral dividers to provide 2" [51mm] full capacity cable bend radius control for fiber optic and UTP/STP cable installations. Ideal for lay-in or pull-through installations. Couplings included. 1" [25mm] 3/8" [9.5mm] 2401D 6 1/2" [165mm] Divided Coupling – Joins sections of 2400DB Divided Base. 2" [51mm] 5 1/2" [140mm] V2406 2406-FW V2415DFO 2415DFO-FW Cover Clip – Covers joints where sections of 2400 Series Raceway cover or base come together. Nonmetallic construction. 8" [203mm] 1 1/2" [38mm] 10" [254mm] V2410BD 2410BD-FW Divided Blank End Fitting – Closes off open end of 2400D Series Raceway. Radiused Divided Tee – For branches at right angles. Provides 2" [51mm] full capacity cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. 4 7/8" [124mm] 5 7/8" [149mm] 1 3/16" [30mm] V2417D 2417D-FW V2410D 2410D-FW Divided Internal Elbow – Makes internal 90° corners in runs of 2400D Series Raceway. 1 3/4" [45mm] Divided Entrance End Fitting – Feeds 2400D Series Raceway. Two 1/2" trade size KOs and two rectangular KOs for communication cabling. Two additional 1" and 3/4" concentric trade size KOs on sides. 1 29/32" [49mm] 2 1/4" [57mm] 2 5/8" [67mm] V2410DFO 2410DFO-FW 4 3/4" [121mm] 2 7/8" [73mm] V2417DFO 2417DFO-FW 3" [76mm] Divided Entrance End Fitting – Feeds 2400 & 2400D Series Raceway. Includes 1/2", 3/4", and 1" trade size KOs on back and end. Removable divider and bend radius control insert included. V2418DFO 2418DFO-FW 5" [127mm] 7 1/8" [181mm] V2411D 2411D-FW 1 29/32" [49mm] 4" [102mm] Radiused Divided Internal Elbow – 90° internal corner. Provides a 2" [51mm] full capacity cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Radiused Divided External Elbow – 90° external elbow. Provides a 2" [51mm] full capacity cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Divided Flat Elbow – Makes right angle turns in runs of 2400D Series Raceway on same surface. NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 3 15/16" [100mm] 9 2400 Series Divided Raceway Fittings Ordering Information (continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications V24DWND 24DWND-FW Downward Duplex Device Bracket – Labor saving over-theraceway device bracket. For 15A or 20A duplex receptacles or 106 style data frame in 2400D Series Raceway. V2444D-2N 2444D-2NFW Divided Box – Labor savings over-the- raceway box. A divided two-gang box for use with 2400D Series Raceway. Allows both power and low voltage at a single pointof-use. For use with commercially available faceplates (not supplied). 4 3/4" [120mm] 2 1/8" [54mm] 4 3/4" [121mm] 2 3/4" [70mm] 4 3/4" [121mm] V24DWNR 24DWNR-FW 4 3/4" [120mm] 2 1/8" [54mm] V24DWNU 24DWNU-FW 4 3/4" [121mm] 2 1/8" [54mm] Downward Decorator Device Bracket – Labor saving overthe-raceway device bracket. For 15A and 20A decorator/GFCI receptacles or 106 style data frame in 2400D Series Raceway. 4 5/8" [118mm] Downward Extron® MAAP Device Plate – Labor saving, over-the-raceway device plate. Accepts two Extron® Electronics MAAP single space modules. 4 5/8" [118mm] V2475D 2475D-FW V24DWNS 24DWNS-FW 4 3/4" [121mm] 2 1/8" [54mm] Device Bracket – For use with 2444D-2N for both power and low voltage at a single point of use. Accepts 5507 Series Faceplates, Ortronics® TracJack & Series II Modules (requires S2-EPL Plate),Pass & Seymour Activate Series Inserts (requires CM-EPLA Plate) and Wiremold Open System Communication Modules (requires CM-EPLA Plate). V2450 2450-FW 3/8" [9.5mm] 5 9/16" [140mm] 1 7/8" [48mm] Downward Ortronics® Series II Device Plate – Labor saving, over-the-raceway device plate. Accepts tone Ortronics® Series II module. 2 7/8" [74mm] V4089 2" [51mm] V2444D 2444D-FW Device Box – One-gang, labor saving, over-the-raceway box for use with 2400D Series Raceway. Cover has two twistouts for 2400D Series Raceway. Accepts industry standard faceplates for electrical and communication devices. 4 5/8" [117mm] 2 3/4" [70mm] 2 3/4" [70mm] 4 3/4" [121mm] 1 5/8" [41mm] Reducing Connector – For reducing from 4000 Series Raceway to 2400D Series Raceway. 4 3/4" [121mm] 2 7/8" [73mm] V2444D-2A 2444D-2AFW Bridge Fitting – For allowing 2400D Series Raceway to bridge over existing installations of 2400, 2400D, 500, and 700 Series Raceways. V2489TB 4 5/8" [117mm] Divided Device Box – Divided two-gang, labor saving, over-theraceway box for use with 2400D Series Raceway. Provides the ability to have both power and low voltage at a single point-of- use. Accepts 5507 Series Faceplates, Ortronics® TracJack & Series II Modules (requires S2-EPL Plate), Pass & Seymour Activate Series Inserts (requires CM-EPLA Plate) and Wiremold Open System Communication Modules (requires CM-EPLA Plate). 2 7/8" [173mm] Transition Box – Connects existing installations of 2100 Series Raceway to 2400D Series Raceway. 1 3/4" [44mm] 2100 2400 NOTE: “V” prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 10 5507 Series Faceplates Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 5507AD 5507AD-FW Modular Furniture Adapter – Accepts Activate modular furniture bezel and other modular furniture adapters. 5507FRJ 5507FRJ-FW Flush Dual RJ11/RJ45 Faceplate – Mounts one or two keystone device modules, recessed to provide a flush installation. Has one opening and a KO for the other. 5507B 5507B-FW Blank Faceplate – Covers unused compartments in the device bracket. 5507AAP 5507AAP-FW Extron® AAP Faceplate – Accepts two Extron® Electronics AAP single space modules. 5507D 5507D-FW Duplex Faceplate – Covers duplex style devices. Accepts 106 Frame. 5507MAAP 5507MAAP-FW Extron® MAAP Faceplate – Accepts two Extron® Electronics MAAP single space modules. 5507R 5507R-FW Rectangular Faceplate – Covers rectangular style devices. 5507-4TJ 5507-4TJFW Ortronics® Faceplate – Mounts Ortronics datacom inserts. Accepts four TracJack Devices. 5507-6TJ 5507-6TJFW Ortronics® Faceplate – Mounts Ortronics datacom inserts. Accepts six TracJack Devices. CM-EPLA CM-EPLA-FW End Plates – Mounts Pass & Seymour Activate and Wiremold Open System communication modules into 5507 Series Faceplates. Includes two outlet identification labels with clear covers and two matching screw covers. S2-EPL S2-EPL-FW End Plates – Mounts Ortronics Series II modules into 5507 Series Faceplates. Includes two outlet identification labels with clear covers and two matching screw covers. 5507S Rectangular Spacer – Mounts commercial device plates. Installs between the device bracket and a device. 5507SW 5507SW-FW Switch Faceplate – Covers standard toggle switches. 5507T1 5507T1-FW Single Receptacle Faceplate – Covers single receptacles – 1.59" [40.4mm] diameter. 5507T2 5507T2-FW Single Receptacle Faceplate – Covers single receptacles – 1.41" [35.8mm] diameter. 5507RJ 5507RJ-FW NOTE: Dual RJ11/RJ45 Connector Faceplate – Mounts one or two keystone device modules, has one opening and a KO for the other. All faceplates have a standard measurement of 4 1/4" x 1 7/8" [108mm x 34mm]. Part number without prefix indicates Ivory color, “-FW” suffix indicates Fog White color. 11 DATACOM CONNECTIVITY OPTIONS Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways. They are: • Ortronics® TracJack® and Series II Modular Connectivity Solutions • Pass & Seymour Activate™ Modular Inserts • Open System Communication Modules Ortronics® Connectivity TracJack® Individual Jack System • • • • • • Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45° exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format Series II Front-Loading, Module System • • • • • • Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Available in flat or angled 45° exit configurations Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com. Pass & Seymour Legrand Network Wiring Activate™ Series Front-Loading Inserts • • • • • Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com. Open Connectivity Solutions Wiremold Open System Communications Modules • Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative. WIREMOLD U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2010 Legrand All Rights Reserved ED874R19 – Updated January 2010 – For latest specs visit www.legrand.us/wiremold
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:01:21 13:55:48-05:00 Modify Date : 2010:01:21 14:07:33-05:00 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Creator Tool : QuarkXPress(R) 8.12 Metadata Date : 2010:01:21 14:07:33-05:00 Producer : QuarkXPress(R) 8.12 Format : application/pdf Title : 2400 & 2400D Series Raceway Cut Sheet Creator : Document ID : uuid:7100b573-f92b-b74a-97da-80e3d54ff195 Instance ID : uuid:b949e88d-b151-6342-90b6-256f3c255ac5 Page Count : 12EXIF Metadata provided by EXIF.tools