R Contactor.indb Brochure

2016-10-27

: Pdf 1000449036-Brochure 1000449036-Brochure B6 unilog

Open the PDF directly: View PDF .
Page Count: 137

Download
Open PDF In Browser	View PDF

US catalog

R contactors
Control of AC and DC power circuits
up to 5000 A

Motor rated operational powers and currents

The currents given below concern standard three-phase four-pole cage motors (1500 r.p.m. at 50 Hz 1800 r.p.m. at 60 Hz).
These values are given for guidance and may vary according to the motor manufacturer and depending on the number of poles.
IEC

Motor nominal current: standardized values in blue color
(according to IEC 60947-4-1 Annex G)

UL / CSA

Motor nominal current: standardized values
(according to IEC 60947-4-1 Annex G and UL 508)

Motor
power

220 V 230 V 240 V 380 V 400 V 415 V 440 V 500 V 660 V 690 V

Motor
power

208 V

220-240 V

380-415 V

440-480 V

kW

A

A

A

A

A

A

A

A

A

A

hp

A

A

A

A

A

0.06
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
400
500
560
630
710
800
900
1000

0.37
0.54
0.73
1
1.6
2.0
2.7
3.5
4.9
6.6
8.9
11.8
15.7
20.9
28.2
39.7
53.3
63.8
75.3
100
120
146
177
240
291
355
418
509
637
782
983
1109
1255
1545
1727
1928
2164
2446
2760
3042

0.35
0.52
0.7
1
1.5
1.9
2.6
3.3
4.7
6.3
8.5
11.3
15
20
27
38
51
61
72
96
115
140
169
230
278
340
400
487
609
748
940
1061
1200
1478
1652
1844
2070
2340
2640
2910

0.34
0.50
0.67
1
1.4
1.8
2.5
3.2
4.5
6
8.1
10.8
14.4
19.2
25.9
36.4
48.9
58.5
69
92
110
134
162
220
266
326
383
467
584
717
901
1017
1150
1416
1583
1767
1984
2243
2530
2789

0.21
0.32
0.46
0.63
0.9
1.2
1.6
2.0
2.8
3.8
5.2
6.8
8.9
12.1
16.3
23.2
30.5
36.8
43.2
57.9
69
84
102
139
168
205
242
295
368
453
568
642
726
895
1000
1116
1253
1417
1598
1761

0.2
0.3
0.44
0.6
0.85
1.1
1.5
1.9
2.7
3.6
4.9
6.5
8.5
11.5
15.5
22
29
35
41
55
66
80
97
132
160
195
230
280
350
430
540
610
690
850
950
1060
1190
1346
1518
1673

0.19
0.29
0.42
0.58
0.82
1.1
1.4
1.8
2.6
3.5
4.7
6.3
8.2
11.1
14.9
21.2
28
33.7
39.5
53
64
77
93
127
154
188
222
270
337
414
520
588
665
819
916
1022
1147
1297
1463
1613

0.18
0.26
0.39
0.53
0.74
1
1.3
1.7
2.4
3.2
4.3
5.7
7.4
10.1
13.6
19.3
25.4
30.7
35.9
48.2
58
70
85
116
140
171
202
245
307
377
473
535
605
745
832
929
1043
1179
1330
1466

0.16
0.24
0.32
0.48
0.68
0.88
1.2
1.5
2.2
2.9
3.9
5.2
6.8
9.2
12.4
17.6
23
28
33
44
53
64
78
106
128
156
184
224
280
344
432
488
552
680
760
848
952
1076
1214
1339

0.13
0.18
0.24
0.37
0.51
0.67
0.91
1.15
1.7
2.2
2.9
4
5.1
7
9.3
13.4
17.8
22
25.1
33.5
40.8
49.1
59.6
81
97
118
140
169
212
261
327
370
418
515
576
643
721
815
920
1014

0.12
0.17
0.23
0.35
0.49
0.64
0.87
1.1
1.6
2.1
2.8
3.8
4.9
6.7
8.9
12.8
17
21
24
32
39
47
57
77
93
113
134
162
203
250
313
354
400
493
551
615
690
780
880
970

1/2
3/4
1
1-1/2
2
3
5
7-1/2
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500

2.4
3.5
4.6
6.6
7.5
10.6
16.7
24.2
30.8
46.2
59.4
74.8
88
114
143
169
211
273
343
396
528
–
–
–
–
–
–

2.2
3.2
4.2
6
6.8
9.6
15.2
22
28
42
54
68
80
104
130
154
192
248
312
360
480
604
722
828
954
1030
1180

1.3
1.8
2.3
3.3
4.3
6.1
9.7
14
18
27
34
44
51
66
83
103
128
165
208
240
320
403
482
560
636
–
786

1.1
1.6
2.1
3
3.4
4.8
7.6
11
14
21
27
34
40
52
65
77
96
124
156
180
240
302
361
414
477
515
590

0.9
1.3
1.7
2.4
2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
99
125
144
192
242
289
336
382
412
472

2

1SXU10607C0201 | R contactor US catalog

550-600 V

R contactors
Control of AC and DC power circuits up to 5000 A

1

Overview

2

Construction characteristics

3

AC circuit switching

4

DC circuit switching

5

Advanced applications

6

General technical data

7

Accessories and spare parts

8

Terminal marking and wiring diagrams

9

Dimensions

10

Terms and definitions

11

Questionnaire

12

Index

R contactor US catalog | 1SXU106047C0201

3

R contactors
Engineered to perform in heavy duty applications

With over 100 years of experience
in control, ABB meets AC and DC
requirements from 63 A up to 5000 A
with R contactor range.
We offer our application know-how through the R
contactor range to perfectly match your utilization
requirements, whatever the usage condition
and the required configuration. Robustness and
reliability bring R contactors technology beyond
the limits of other contactors.

Secure Operation
Reliability
¡
¡
¡
¡

High making and breaking capacity
Durability up to 5 million electrical operations
Easy inspection access and availability of spare parts
Experienced and proven for years

Improved Installation
Efﬁciency
¡
¡
¡
¡

Variable number of poles
NO, NC or combined main poles configuration
Main pole for On-load breaking or for coupling
Magnetic or mechanical latch available

Increased Application
Productivity
¡ Rated current up to 5000 A
¡ Rated voltage up to 1000 V AC or 1500 V DC
¡ IEC AC-1, AC-3, DC-1, DC-3 and DC-5
utilization categories.
¡ UL general use rated 800 - 2000A at 600VDC
¡ Mechanical switching frequency up to 1200
cycles per hour

... you can trust

From standard to tailor-made solution
– Most commonly used conﬁgurations are presented in the R contactor catalog and well documented
– 120V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard
– Other configurations and ratings are available on request
Engineered to perform in wide variety of applications

Industries
– Iron and steel industries
– Mining
– Cranes
– Induction furnaces

4

Power generation
– Hydroelectric power stations
– Photovoltaic power plants
– Power distribution
– Energy storage

1SXU10607C0201 | R contactor US catalog

Infrastructure
– Power panels
– Pump station
– Rail transportation

R contactors
Get the right product
Conventional applications

1

AC circuit switching

DC circuit switching

Up to 500 V AC
IOR contactors

Up to 1500 V DC with poles in series
IOR..CC contactors

From 500 up to 1000 V AC
IOR..MT contactors

AC-1 Rated operational current up to 5000 A
AC-3 Rated power up to 1500 kW (1520 A - 440 V)

DC-1 Rated operational current up to 5000 A
DC-3 / DC-5 operational current up to 2000 A

Advanced applications
N.O./N.C. main poles combination

Power circuit coupling

Slip-ring motor control

AC circuit switching
NOR..MT contactors

Up to 1000 V AC / 1500 V DC
LOR couplers

Ue up to 5000 V AC
FOR contactors

DC circuit switching
NOR..CC contactors

Energy saving and safety requirements

Alternator field discharge

Equipped with latching
..AMA, ..AME contactor types

Umax 2250 V DC
AM-CC-JORE contactors

R contactor US catalog | 1SXU106047C0201

5

R contactors for AC circuit switching

1

Rated operational voltage
Ue from 500 up to

1000 V AC

Contactor
type

IORR63..MT

Categories
AC-1

IORR125..MT

IORR200..MT

IORR400..MT

IORR500..MT

IORR800..MT

Ue
at 40 °C

AC-3

AC-3

Ie 85 A

170 A

260 A

400 A

550 A

800 A

690 V AC

Ie 85 A

160 A

260 A

400 A

550 A

800 A

1000 V AC max.

Ie 56 A

105 A

180 A

280 A

380 A

580 A

150 kW

240 kW

400 kW

540 kW

780 kW

690 V AC

Power 80 kW

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

Rated operational voltage
Ue up to

500 V AC

Contactor
type

–

Categories
AC-1
AC-3

AC-3

Ue
at 40 °C

Ie

From 85 A to 550 A, select above IOR..-MT

900 A

380-415-440 V AC

Ie

–

800 A

500 V AC max.

Ie

–

800 A

Power

–

450 kW

400 V AC

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

6

IORR800

1SXU10607C0201 | R contactor US catalog

1

IORR1400..MT

IORR1700..MT

IORR2100..MT

IORR2500..MT

IORR3200..MT

IORR3800..MT

IORR4500..MT

IORR5100..MT

1250 A

1650 A

1850 A

2200 A

3000 A

3500 A

4000 A

4500 A

970 A

1170 A

1270 A

–

–

–

–

–

610 A

680 A

810 A

–

–

–

–

–

1000 kW

1200 kW

1300 kW

–

–

–

–

–

IORR1000

IORR1400

IORR1700

IORR2100

IORR2500

IORR3200

IORR3800

IORR4500

IORR5100

1000 A

1350 A

1650 A

2000 A

2400 A

3200 A

3800 A

4500 A

5000 A

800 A

1080 A

1260 A

1520 A

–

–

–

–

–

800 A

1080 A

1220 A

1340 A

–

–

–

–

–

450 kW

630 kW

750 kW

900 kW

–

–

–

–

–

R contactor US catalog | 1SXU106047C0201

7

R contactors for DC circuit switching

1

Rated operational voltage
Ue up to

1500 V DC

Contactor
type
Number of poles Categories
in series

IORR63 ..CC

IORR125 ..CC

IORR200 ..CC

IORR400 ..CC

IORR500 ..CC

Ue max.

DC-1

500 V DC

Ie 85 A

170 A

275 A

400 A

550 A

DC-3 / DC-5

500 V DC

Ie 68 A

125 A

205 A

350 A

500 A

DC-1

1000 V DC

Ie 85 A

170 A

275 A

400 A*

550 A*

DC-3 / DC-5

1000 V DC

Ie 68 A

125 A

205 A

350 A

500 A

DC-1

1500 V DC

Ie 85 A*

170 A*

275 A*

400 A*

550 A*

DC-3 / DC-5

1500 V DC

Ie 68 A*

125 A*

205 A*

350 A*

500 A*

1 pole

2 poles

3 poles

* Ue max. = 1500 V DC, version with increased insulation for 1000 V DC < Ue ≤ 1500 V DC, please consult us.
*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

Contactors
UL / CSA approved
Rated operational voltage
Ue up to

600 V DC

Contactor
type

IORR800-10-CC-U

IORR1000-10-CC-U IORR1400-10-CC-U

IORR1700-10-CC-U

IORR2100-10-CC-U

1000 A

1700 A

2000 A

U max.
1 pole

General use

600 V DC

Ie 800 A

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

8

1SXU10607C0201 | R contactor US catalog

1300 A

1

IORR800..CC

IORR1000..CC

IORR1400..CC

IORR1700..CC

IORR2100..CC

IORR2500..CC

IORR3200..CC

IORR3800..CC

IORR4500..CC

IORR5100..CC

750 V DC

800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

600 V DC

720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

1500 V DC 800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

1000 V DC 720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

1500 V DC 800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

1500 V DC 720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

Ue max.

R contactor US catalog | 1SXU106047C0201

9

2

10

1SXU10607C0201 | R contactor US catalog

Construction characteristics

Construction characteristics

12

Contactors with magnetic latching ..AMA type

14

Contactors with mechanical latching ..AME type

15

Type and order code for R contactors

16

Coil voltage and blowout type

17

2

Auxiliary contacts
Main characteristics

R contactor US catalog | 1SXU106047C0201

18

11

Construction characteristics

Auxiliary frame

Auxiliary contacts

Upper connection

This design offers a great
ﬂexibility with standard types as
well as special variants

2

Flexible design
R contactors are built with a main frame supporting
main poles, electro-magnet, auxiliary contacts and
feature:
– Variable number of N.O. and N.C. poles, with or
without blowout coils
– Large number of N.O. and N.C. auxiliary contacts
– Control circuit for standard and specific voltages
– Mechanical or magnetic latching available.

Main frame

Electro-magnet
Lower connection

Main poles with arc chutes

All parts are easily accessible and removable from
the front.

Main frame
The main frame is designed with a fixed bar and a rotating shaft linked by 2 bearings.
All parts (poles, electro-magnet, auxiliary contacts) are mounted on this frame.
Small frame for R63 ... R500 contactors

Large frame for R800 ... R5100 contactors

Fixed bar

Auxiliary frame

Rotating shaft

Bearings

Main poles
Arc chute
Arcing horn

Fixed contacts

Moving contacts

The moving contacts are similarly mounted and move directly
with the rotating shaft.
A blowout coil
The standard blowout coil is rated to carry the total current
flowing through the poles.
Arc chutes
Ensure a rapid extinction of the arcs. Quick and easy removal
of the arc chutes allows an easy inspection of the contacts
and their replacement if necessary.

Each pole is designed with:
Fixed and moving contacts
The fixed contacts are mounted on an insulated support
screwed onto the fixed bar.
12

1SXU10607C0201 | R contactor US catalog

Arcing horn
Assits the elongation and breaking of the electric arc (not
applicable to LOR couplers).

Construction characteristics

Low current breaking for DC circuits
R63 … R2100 contactors
If the breaking current is lower than 50 % of the contactor
rating, a permanent magnet must be added. Please consult
us. Refer to blowout code table in DC circuit switching

2

Control circuit
The electro-magnet is built with a magnetic circuit and a coil.
It is mounted on the right side or on the frame center, in
standard. It can be mounted on the left side on request.

Rectifier

Economy resistor

AC control circuit supply:
RR electro-magnet
The coil is fed from an AC supply via a rectifier and an
economy resistor. The control supply frequency is 50/60 Hz
in standard. For others frequencies, please consult us.
DC control circuit supply (on request):
RE electro-magnet
The coil is fed from a DC supply via an economy resistor.
Latching version
(see following pages)
Magnetic latching for R63 … R200
Mechanical latching for R500 … R5100

Low consumption coil for R63 … R500 contactors (on request)
– Up to 6 times less in control power consumption at holding
– Reduced width up to 15 % compared to standard R contactors
– Control voltage available:
- 24…440 V 50 / 60 Hz
- 24…250 V DC
– Example of type: IORE63..-LC.
Principle
Uc

A varistor and a lagging contact for holding winding
insertion are factory mounted.

A2

B1 =

Pull-in
A3

U

B2 = Holding

Varistor

A1

Only a part of the winding (B1) is energized at closing.
After opening the NC contact, the complete coil (B1 +
B2) is used for contactor holding.
R contactor US catalog | 1SXU106047C0201

13

Contactors with magnetic latching ..AMA type

For R63 ... R200 contactors
Description
Contactors with magnetic latching are very similar to standard contactor
in construction and dimensions. Only the electro-magnet and the coil
have a specific design.

2

AC operated: ..RR..AMA
DC operated: ..R..AMA
A permanent magnet is mounted in the upper part of the fixed laminated
circuit. The double-winding coil is always fed from d.c. supply (from
rectifier for IORR..AMA type) and has:
– 1 terminal for "De-latching" + marked "A1" (red)
– 1 terminal for "Latching" + marked "A2" (red)
– 1 common terminal (blue).
Coil windings are only energized at the point of opening and closing of
the contactor. 2 NO + 2 NC auxiliary contacts is fitted as standard. For
additional auxiliary contact, refer to "Auxiliary contact fitting details".

Air-gap

Permanent magnet

Electro-magnet of contactors ..AMA

Applications
– Contactors which remain permanently closed, that allows energy saving
– Installations where the control circuits are fed from batteries and
where it's needed to reduce the power consumption
– In case of accidental supply failure, the user knows the state (ON or
OFF) of the contactor when the failure occurred
– Contactors which must remain closed for safety reasons, even if the
control circuit current decreases
– Contactors in distribution circuits. The contactor is used as an
isolating switch
– Protection against accidental failure of the main supply.

Operation
Contactor closing (latching)
The electro-magnet being open, the coil winding (1) is fed via the contact B
with a current i1. The strength and direction of the magnetic ﬁeld produced
in this winding is the same as that produced by the permanent magnet.
Contactor opening (de-latching)
The electro-magnet being closed, the coil winding (2) is fed via the
contact A with a current i2. The direction of the field produced by current
i2, open the contactor.

1

2

i1

i2

Contactor opening and closing
On opening and closing of the contactor, the coil is immediately deenergized by auxiliary contacts B and A mounted on the contactor.

B

A

+

-

+

Block diagram

14

1SXU10607C0201 | R contactor US catalog

Mechanical durability
0.2 millions of operating cycles.

Contactors with mechanical latching ..AME type

Tripping electro-magnet

Mechanical latch

For R500 ... R5100 contactors
Description
Contactors with mechanical latching differ from standard
contactor by a double electro-magnet (with closing and
tripping electro-magnet, electrically separated).

2

A mechanical latch is mounted above the closing electro-magnet.
The tripping electro-magnet releases the mechanical latch.
2 NO + 2 NC auxiiliary contacts are fitted as standard for
..AME types. For additional auxiliary contacts, refer to
"Auxiliary contact fitting details.
AC operated: ..RR..AME
Closing electro-magnet

Applications
– Contactors which remain permanently closed allows
energy saving
– Installations where the control circuits are fed from batteries
and where reduction of power consumption is needed
– In case of accidental supply failure, the user knows the state
(ON or OFF) of the contactor when the failure occurred
– Contactors which must remain closed for safety reasons,
even if the control circuit current decreases
– Contactors in distribution circuits where the contact serves
as an isolating switch
– Protection against accidental failure of the main supply.
Operation
Contactor closing (latching)
Once the closing coil is energized, the contactor closes. It
remains in this position by the mechanical latch action. The
closing coil is de-energized by an electrical interlocking contact.
Contactor opening (de-latching)
Once the tripping coil is energized, the mechanical latch is
released and the contactor opens.The tripping coil is deenergized by an electrical interlocking contact.
Mechanical durability
0.2 millions of operating cycles.
Variant
AMF types with 2 tripping coils are available on request.

R contactor US catalog | 1SXU106047C0201

15

Type and order code for R contactors

2

Example:
IORE800-30-MT-AME, 220 V DC coil + 1 CA15-F + 1 CA15-O
R contactor with RE electro-magnet and circuit for DC operation via an economy resistor, 800 A rating, 3 N.O. main poles,
0 N.C. main pole, with mechanical latching, 220 V DC coil + 1 extra CA15-F (N.O.) auxiliary contact block + 1 extra CA15-O
(N.C.) auxiliary contact (total auxiliary contacts: 1 N.O. + 1 N.C.)
Type
I

O

R E

800

-

3

0

-

MT

-

AME

220

+

1 CA15-F + 1CA15-O

Auxiliary contacts

Contactor type
N.O. poles

I

N.C./N.O. poles, break before make
N.C./N.O. poles, make before break

J

Coupler

L

Contactor for slip-ring motors

Coil voltage (refer to following page)

N

F

Open bar mounted

O

empty

No option

AMA

Magnetic latching (63…200 A)

AME

Mechanical latching (400…5000 A)

LC

Low consumption coil

Electro-magnet

empty

AC switching, poles up to 500 V AC

AC operated coil + rectiﬁer + economy resistor

RR

MT

AC switching, poles from 500…1000 V AC

DC operated coil + economy resistor

RE

CC

DC switching, poles up to 1500 V DC

Contactor rating

Number of N.C. poles
Number of N.O. poles

Order code
FPL

8

6

2

9

3

2

5

R

0

1

1

6

Contactor rating

Operating coil voltage
(see table on next page)

Equipment type
I

1

N

4

I..MT

2

N..MT

5

L

3

J

6

Extra auxiliary contacts
(see selection table)
Blowout type

Electro-magnet type

(see table on next page)

RR

5

RE

9

RR..CC

6

RE..CC

0

Operation mode
1 Direct
2 Mechanical latching
Number of poles

Notes:
– Additional auxiliary contacts can be ordered separately and mounted by the user if the ﬁxed dimension F doesn't increase (see Auxiliary contact ﬁtting details table).
– Order code or contactor rating must be speciﬁed when the CA15 auxiliary contact are ordered separately.

16

1SXU10607C0201 | R contactor US catalog

Coil voltage and blowout type
Selection table

Blowout code table in DC circuit switching
Standard electromagnetic blowout coil (bidirectional)
Used to stretch and break the electric arc from contacts gap to the arc chute.
Blowout coil rating according to the operational current.
Rating
63 A
A
32
40
85

2

Code
125 A
A
–
170
–

200 A
A
–
260
–

400 A
A
–
400
–

500 A
A
–
550
–

£R
4R
5R
6R

Permanent magnets blowout (unidirectional)
If breaking current < 50% of contactor rating, the electromagnetic field remains too weak to blow the arc,
therefore permanent magnets must be added.
Rating
from 63 to 2100 A

Code
£R
7R

Permanent magnets blowout
Pole polarization with permanent magnet
+

-

1-pole

+

-

2-pole

+

-

3-pole

R contactor US catalog | 1SXU106047C0201

17

Auxiliary contacts
Main characteristics
For R63 ... R500 contactors

2

CARB, 1-pole auxiliary contact
– 1 N.O. auxiliary contact, generally used for "hold-in"
– Ith = 6 A
– Fitted on the left side.

CA12, 2-pole auxiliary contact blocks
CA12-1
CA12-2

1 N.O. + 1 N.C.
2 N.O.

– Ith = 12 A
– Fitted on the upper part of the electro-magnet.

CAOVE, 1-pole auxiliary contact
– 1 N.C. auxiliary contact, generally used for electrical
interlocking (adjustable)
– Ith = 6 A
– Fitted on the right side.

For R63 ... R5100 contactors
CA15, 1-pole adjustable auxiliary contacts
Small frame for R63 ... R500 contactors

CA15-F
CA15-O

CA12

1 N.O.
1 N.C.

– For R63 ... R500 contactors: auxiliary contact is mounted
between the main pole and the electro-magnet
– For R800 … R5100 contactors: auxiliary contact is
mounted on the auxiliary frame. If more CA15s are needed,
they are mounted on the main frame
– Ith = 15 A.

CAOVE (N.C.)

Large frame for R800 ... R5100 contactors
CA15 on auxiliary frame

CA15

CARB (N.O.)

CA15 on main frame

18

1SXU10607C0201 | R contactor US catalog

Auxiliary contacts
Selection tables
Extra auxiliary contact code tables
F fixing dimension can change according to the number of CA15 auxiliary contacts. Refer to table below and
"Dimensions" section.
Type
RR, RE (63...500 A)
R..AMA (63...200 A)
CA12-1
CA12-2
N.O. + N.C.
2 x N.O.
–
–
1
–
1
–
1
–
–
1
1
–
2
–
–
1
1
1
3
–
–
2
2
1
1
2
–
3
1
–
1
–
–
1
–
1
–
1
–
1
–
1

Type
RR, RE, RR..AME, RE..AME (≥ 800 A)
RR..AMA (63...200 A)
CA15F
CA15O
N.O.
N.C.
–
–
–
1
–
2
–
3
–
4
1
–
1
1
1
2
2
–
2
1
2
2
3
–
3
1
3
2
3
3
4
–
4
1
4
2
4
3
5
–
5
1
6
–

Code

CA15F
N.O.
–
–
–
–
–
1
–
1
–
–
–
–
–
–
1
2
1
2
2
4
3

CA15O
N.C.
–
–
1
2
–
–
–
–
–
–
–
–
–
–
1
2
1
–
2
–
1

R_££_
R_00_
R_11_
R_12_
R_13_
R_20_
R_21_
R_22_
R_30_
R_31_
R_33_
R_40_
R_42_
R_51_
R_60_
R_61_
R_62_
R_63_
R_64_
R_65_
R_66_
R_67_

Code

2
R_££_
R_00_
R_01_
R_02_
R_03_
R_04_
R_10_
R_11_
R_12_
R_20_
R_21_
R_22_
R_30_
R_31_
R_32_
R_33_
R_40_
R_41_
R_42_
R_43_
R_50_
R_51_
R_60_

The above tables indicate the main auxiliary contact combinations. For other combinations, please consult us.

Auxiliary contact fitting details
Contactor types

Rating

Auxiliary contacts
ﬁtted as standard

Additional auxiliary contacts
without increasing dimension F (1)
CA15

IORR
IORE
IORR..MT
IORR..CC
IORE..MT
IORE..CC
IOR..AMA
IORR..AMA
IORR..AME
IORE..AME
NORR..MT
NORR..CC
NORE..MT
NORE..CC

A
800…5100

1 CA15-F

+

1 CA15-O

63…500
800…5100
63…500
800…5100
63…500
800…5100
63…200
63…200
400...500
800…5100
63...200
800
63...200
800

1
1
1
1
1
1
1
1
1
1
1
1

+
+
+
+
+
+

1
1
1
1
1
1
1
1
1
1

CARB
CA15-F
CARB
CA15-F
CARB
CA15-F
CARB
CARB

CARB
CA15-F
CARB
CA15-F

+
+
+
+

CAOVE
CA15-O
CAOVE
CA15-O
CAOVE
CA15-O

CAOVE
CA15-O
CAOVE
CA15-O

+

+
+
+

+
+

2 max.

CA12
Single block
(incl. 2 contacts)
-

2
2
2
1
5
2
2

1
1
1
1
-

max.
+
max.
+
max.
+
max.
max.
max.
+
max.

max.
max.
max.

max.

CA12
Double block
(incl. 4 contacts)
+ 1
+ 1
+ 1
+ 1
+ 1
-

max.
max.
max.

max.
max.

(1) More CA15 auxiliary contacts can be ﬁtted with increasing dimension F. See ﬁxing dimension F in "Dimensions" section.

R contactor US catalog | 1SXU106047C0201

19

3

20

1SXU10607C0201 | R contactor US catalog

AC circuit switching

Overview

22

Ordering details
Power circuit up to 500 V AC
IORR

AC operated

24

3
Power circuit up to 1000 V AC
IORR..MT

AC operated

25

Power circuit up to 500 V AC, with mechanical latching
IORR..AME

AC operated

26

Power circuit up to 1000 V AC, with latching
IORR..MT-AMA

AC operated

27

IORR..MT-AME

AC operated

27

Technical data

28

Type and order code for R contactors

18

R contactor US catalog | 1SXU106047C0201

21

R contactors for AC circuit switching

Rated operational voltage
3

Ue from 500 up to

1000 V AC

Contactor
type

IORR63..MT

Categories
AC-1

IORR125..MT

IORR200..MT

IORR400..MT

IORR500..MT

IORR800..MT

Ie 85 A

170 A

260 A

400 A

550 A

800 A

Ie 85 A

160 A

260 A

400 A

550 A

800 A

Ue
at 40 °C

AC-3

690 V AC
1000 V AC max.

AC-3

690 V AC

Ie 56 A
Power 80 kW

105 A

180 A

280 A

380 A

580 A

150 kW

240 kW

400 kW

540 kW

780 kW

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

Rated operational voltage
Ue up to

500 V AC

Contactor
type

–

Categories
AC-1
AC-3

AC-3

Ue
at 40 °C

Ie

From 85 A to 550 A, select above IOR..-MT

900 A

380-415-440 V AC

Ie

–

800 A

500 V AC max.

Ie

–

800 A

Power

–

450 kW

400 V AC

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

22

IORR800

1SXU10607C0201 | R contactor US catalog

3

IORR1400..MT

IORR1700..MT

IORR2100..MT

IORR2500..MT

IORR3200..MT

IORR3800..MT

IORR4500..MT

IORR5100..MT

1250 A

1650 A

1850 A

2200 A

3000 A

3500 A

4000 A

4500 A

970 A

1170 A

1270 A

–

–

–

–

–

610 A

680 A

810 A

–

–

–

–

–

1000 kW

1200 kW

1300 kW

–

–

–

–

–

IORR1000

IORR1400

IORR1700

IORR2100

IORR2500

IORR3200

IORR3800

IORR4500

IORR5100

1000 A

1350 A

1650 A

2000 A

2400 A

3200 A

3800 A

4500 A

5000 A

800 A

1080 A

1260 A

1520 A

–

–

–

–

–

800 A

1080 A

1220 A

1340 A

–

–

–

–

–

450 kW

630 kW

750 kW

900 kW

–

–

–

–

–

R contactor US catalog | 1SXU106047C0201

23

IORR contactors
Power circuit up to 500 V AC
Control circuit 120V 60Hz
Description

1SBC104038F0000

IORR contactors are used for controlling AC power circuits up to 500 V AC.

3

IORR800-30

These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available, as standard

Ordering details
AC-3
Rated operational
power
380 V 440 V 500 V
400 V
415 V
kW
kW
kW
450
500
560

AC-1

Number Rated control Auxiliary Type
of poles circuit voltage contacts
Uc
ﬁtted (2)
current
(1)
≤ 440 V θ ≤ 40 °C

A
800

A
900

-

-

-

-

1000

630

710

800

1080

1350

750

800

900

1260

1650

900

1000

1000

1520

2000

-

-

-

-

2400

-

-

-

-

3200

-

-

-

-

3800

-

-

-

-

4500

-

-

-

-

5000

2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
2
3
2
3
2
3
2
3

V 50/60 Hz
120V

120V

120V

120V

120V

120V
120V
120V
120V
120V

(1) Other control voltages, please contact us.
(2) Other auxiliary contact arrangements, please contact us.

24

1SXU10607C0201 | R contactor US catalog

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

IORR800-20
IORR800-30
IORR800-40
IORR1000-20
IORR1000-30
IORR1000-40
IORR1400-20
IORR1400-30
IORR1400-40
IORR1700-20
IORR1700-30
IORR1700-40
IORR2100-20
IORR2100-30
IORR2100-40
IORR2500-20
IORR2500-30
IORR3200-20
IORR3200-30
IORR3800-20
IORR3800-30
IORR4500-20
IORR4500-30
IORR5100-20
IORR5100-30

Order code

Weight
Pkg
(1 pce)

FPL8615215R2113
FPL8615315R2113
FPL8615415R2113
FPL8715215R2113
FPL8715315R2113
FPL8715415R2113
FPL6115215R2113
FPL6115315R2113
FPL6115415R2113
FPL6215215R2113
FPL6215315R2113
FPL6215415R2113
FPL6315215R2113
FPL6315315R2113
FPL6315415R2113
FPL6715215R2113
FPL6715315R2113
FPL6515215R2113
FPL6515315R2113
FPL6615215R2113
FPL6615001R2113
FPL6815215R2113
FPL6815001R2113
FPL6915001R2113
FPL6915002R2113

kg
38
48
58
38
48
58
40
50
63
44
56
72
48
62
78
On
request
On
request
On
request
On
request
On
request

IORR..MT contactors
Power circuit up to 1000 V AC
Control circuit 120V 50/60 Hz
Description

1SBC104041F0000

IORR..MT contactors are used for controlling AC power circuits from 500 up to 1000 V AC.

IORR1400-20-MT

These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available, as standard

Ordering details
AC-3
Rated operational
power (3)
current
690 V 1000 V ≤ 690 V

AC-1

kW
80

kW
80

A
85

A
85

150

150

160

170

240

250

260

260

400

400

400

400

540

550

550

550

780

850

800

800

1000

900

970

1250

1200

1000

1170

1650

1300

1200

1270

1850

-

-

-

2200

-

-

-

3000

-

-

-

3500

-

-

-

4000

-

-

-

4500

Number
of poles

θ ≤ 40 °C
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
2
3
2
3
2
3

Rated control Auxiliary Type
circuit voltage contacts
Uc
ﬁtted (2)
(1)
V 50/60 Hz
120V

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V
120V
120V
120V

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

IORR63-20-MT
IORR63-30-MT
IORR63-40-MT
IORR125-20-MT
IORR125-30-MT
IORR125-40-MT
IORR200-20-MT
IORR200-30-MT
IORR200-40-MT
IORR400-20-MT
IORR400-30-MT
IORR400-40-MT
IORR500-20-MT
IORR500-30-MT
IORR500-40-MT
IORR800-20-MT
IORR800-30-MT
IORR800-40-MT
IORR1400-20-MT
IORR1400-30-MT
IORR1400-40-MT
IORR1700-20-MT
IORR1700-30-MT
IORR1700-40-MT
IORR2100-20-MT
IORR2100-30-MT
IORR2100-40-MT
IORR2500-20-MT
IORR2500-30-MT
IORR2500-40-MT
IORR3200-20-MT
IORR3200-30-MT
IORR3800-20-MT
IORR3800-30-MT
IORR4500-20-MT
IORR4500-30-MT
IORR5100-20-MT
IORR5100-30-MT

Order code

Weight

3

Pkg
(1 pce)

FPL7125216R2113
FPL7125386R2113
FPL7125416R2113
FPL7425215R2113
FPL7425315R2113
FPL7425415R2113
FPL7625215R2113
FPL7625315R2113
FPL7625415R2113
FPL9425215R2113
FPL9425315R2113
FPL9425415R2113
FPL8325215R2113
FPL8325315R2113
FPL8325415R2113
FPL8625215R2113
FPL8625315R2113
FPL8625415R2113
FPL6125215R2113
FPL6125315R2113
FPL6125415R2113
FPL6225215R2113
FPL6225315R2113
FPL6225415R2113
FPL6325215R2113
FPL6325315R2113
FPL6325415R2113
FPL6725215R2113
FPL6725315R2113
FPL6725415R2113
FPL6525215R2113
FPL6525315R2113
FPL6625215R2113
FPL6625001R2113
FPL6825215R2113
FPL6825002R2113
FPL6925001R2113
FPL6925002R2113

kg
4.2
5.2
6.2
6.2
8.2
10.2
9.6
12.6
15.6
19.2
25
30.8
19.7
25.5
31.3
40
51
62
42
52
65
47
61
74
52
68
82
71
On request
83
On request
95
On request
On request
On request

(1) Other control voltages, please contact us.
(2) Other auxiliary contact arrangements, please contact us.
(3) Power circuit above 1000 V AC, please contact us.

R contactor US catalog | 1SXU106047C0201

25

IORR..AME contactors
Power circuit up to 500 V AC, with mechanical latching
Control circuit 120V 50/60 Hz
Description

1SBC104044F0000

IORR..AME contactors are used for controlling AC power circuits up to 500 V AC.

3

These contactors are designed with:
– mechanical latching
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available

Ordering details
IORR800-30-AME

AC-3
Rated operational
power
380 V 440 V 500 V
400 V
415 V
kW
kW
kW
450 500 560

AC-1

Nb of
poles

current
≤ 440 V θ ≤ 40 °C

A
800

A
900

2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
2
3

Rated control Auxiliary Type
circuit voltage contacts
Uc
ﬁtted (2)
(1)

V 50/60 Hz
120V

120V

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

IORR800-20-AME
IORR800-30-AME
IORR800-40-AME
IORR1000-20-AME
IORR1000-30-AME
IORR1000-40-AME
IORR1400-20-AME
IORR1400-30-AME
IORR1400-40-AME
IORR1700-20-AME
IORR1700-30-AME
IORR1700-40-AME
IORR2100-20-AME
IORR2100-30-AME
IORR2100-40-AME
IORR2500-20-AME
IORR2500-30-AME
IORR3200-20-AME
IORR3200-30-AME

FPL8615225R2223
FPL8615325R2223
FPL8615425R2223
FPL8715225R2223
FPL8715325R2223
FPL8715425R2223
FPL6115225R2223
FPL6115325R2223
FPL6115425R2223
FPL6215225R2223
FPL6215325R2223
FPL6215425R2223
FPL6315225R2223
FPL6315325R2223
FPL6315425R2223
FPL6715225R2223
FPL6715325R2223
FPL6515225R2223
FPL6515325R2223

-

-

-

1000

630

710

800

1080

1350

750

800

900

1260

1650

900

1000 1000 1520

2000

-

-

-

-

2400

-

-

-

-

3200

-

-

-

-

3800

2

120V

2 2

IORR3800-20-AME FPL6615225R2223

-

-

-

-

4500

2

120V

2 2

IORR4500-20-AME FPL6815225R2223

120V

120V

120V

120V
120V

1SXU10607C0201 | R contactor US catalog

Weight
Pkg
(1 pce)

-

(1) Other control voltages please consult us.
(2) Other auxiliary contact arrangements, please consult us.

26

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

Order code

kg
48
58
68
48
58
68
50
60
73
54
66
82
58
72
88
On
request
On
request
On
request
On
request

IORR..MT-AMA and IORR..MT-AME contactors
Power circuit up to 1000 V AC, with latching
Control circuit 120V 50/60 Hz
Description

1SBC104044F0000

IORR..MT-AMA and IORR..MT-AME contactors are used for controlling AC power circuits from 500 up to
1000 V AC.

IORR800-30-MT-AME

These contactors are designed with:
– magnetic latching, AMA types
– mechanical latching, AME types
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contact available for AMA version, as standard
– 2 NO + 2 NC auxiliary contacts available for AME version

3

Ordering details
AC-3
AC-1
Number
of poles
Rated operational
power (3)
current
690 V 1000 V ≤ 690 V θ ≤ 40 °C

Rated control Auxiliary Type
circuit voltage contacts
Uc
ﬁtted (2)
(1)

kW

V 50/60 Hz

kW

A

A

Magnetic latching
80
80
85
85

150

150

160

170

240

250

260

260

Mechanical latching
400 400
400
400
540

550

550

550

780

850

800

800

1000 900

970

1250

1200 1000

1170

1650

1300 1200

1270

1850

-

-

-

2200

-

-

-

3000

-

-

-

3500

-

-

-

4000

2
3
4
2
3
4
2
3
4
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2

120V

120V

120V

120V
120V
120V
120V
120V
120V
120V
120V
120V
120V

Order code

Weight
Pkg
(1 pce)
kg

2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2

IORR63-20-MT-AMA
IORR63-30-MT-AMA
IORR63-40-MT-AMA
IORR125-20-MT-AMA
IORR125-30-MT-AMA
IORR125-40-MT-AMA
IORR200-20-MT-AMA
IORR200-30-MT-AMA
IORR200-40-MT-AMA

FPL7125236R2123
FPL7125336R2123
FPL7125436R2123
FPL7425235R2123
FPL7425335R2123
FPL7425435R2123
FPL7625235R2123
FPL7625335R2123
FPL7625435R2123

3.9
4.9
5.9
5.9
7.9
9.9
9.2
12.2
15.2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

IORR400-20-MT-AME
IORR400-30-MT-AME
IORR500-20-MT-AME
IORR500-30-MT-AME
IORR800-20-MT-AME
IORR800-30-MT-AME
IORR1400-20-MT-AME
IORR1400-30-MT-AME
IORR1700-20-MT-AME
IORR1700-30-MT-AME
IORR2100-20-MT-AME
IORR2100-30-MT-AME
IORR2500-20-MT-AME
IORR2500-30-MT-AME
IORR3200-20-MT-AME
IORR3200-30-MT-AME
IORR3800-20-MT-AME
IORR3800-30-MT-AME
IORR4500-20-MT-AME

FPL9425225R2123
FPL9425325R2123
FPL8325225R2123
FPL8325325R2123
FPL8625225R2123
FPL8625325R2123
FPL6125225R2123
FPL6125325R2123
FPL6225225R2123
FPL6225325R2123
FPL6325225R2123
FPL6325325R2123
FPL6725225R2123
FPL6725325R2123
FPL6525225R2123
FPL6525325R2123
FPL6625225R2123
FPL6625325R2123
FPL6825225R2123

24.2
30
24.2
30
50
61
52
62
57
71
62
78
On
request
On
request
On
request
On
request

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.
(3) Power circuit above 1000 V AC, please consult us.

R contactor US catalog | 1SXU106047C0201

27

IORR800 … IORR2100 contactors
Technical data
Main pole - Utilization characteristics according to IEC

3

AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without derating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
θ ≤ 55 °C
Ue max. ≤ 500 V, 50/60 Hz

With conductor cross-sectional area
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

M
3

IORR800
IORR1000
IORR1400
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
500 V
25…60 Hz (for > 60...400 Hz please consult us)
2...4

IORR1700

IORR2100

1000 A
600 mm²

900
840
θ ≤ 70 °C 720
600

380-415-440 V
500 V

A
A
A
mm²

800 A
800 A

1100 A
600 mm²

1400 A
1000 mm²

1700 A
1500 mm²

2100 A
2000 mm²

1000 A
930 A
800 A
600 mm²

1350
1180
1000
1000

1650
1450
1250
1500

2000
1750
1500
2000

-

1080 A
1080 A

1260 A
1220 A

1520 A
1340 A

630 kW
710 kW
800 kW

750 kW
800 kW
900 kW

900 kW
1000 kW
1000 kW

1600 A
11000 A
9000 A
5000 A
3700 A
2000 A

2000 A
13000 A
11000 A
6000 A
4400 A
2400 A

2500 A
15000 A
12200 A
7000 A
5000 A
2800 A

10000 A
19000 A
19000 A
0.10 mΩ
150 cycles/h
150 cycles/h
-

13500 A
21000 A
21000 A
0.09 mΩ
120 cycles/h
120 cycles/h

A
A
A
mm²

A
A
A
mm²

A
A
A
mm²

Rated operational power AC-3

M
3

380-415 V
440 V
500 V

450 kW
500 kW
560 kW
10 x Ie AC-3 acc. to IEC 60947-4-1
8 x Ie AC-3 acc. to IEC 60947-4-1

Rated making capacity AC-3
Rated breaking capacity AC-3
Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Circuit breaker
1250 A
1 s 9000 A
Rated short-time withstand current Icw
10 s 8000 A
at 40 °C ambient temperature,
30 s 4000 A
in free air from a cold state
1 min 3000 A
15 min 1600 A
Maximum breaking capacity
at 500 V 6400 A
cos φ = 0.35
Maximum making capacity
14000 A
Dynamical withstand of pole
14000 A
Impedance per pole
0.18 mΩ
AC-1 300 cycles/h
Maximum electrical switching frequency
AC-3 300 cycles/h
AC-4 150 cycles/h
Mechanical durability
Number of operating cycles
5 millions cycles
Max. switching frequency
1200 cycles/h

1250
9000
8000
4000
3000
1600

A
A
A
A
A
A

6400 A
14000 A
14000 A
0.18 mΩ
-

2 millions cycles
600 cycles/h

Note: These characteristics are suitable for IOR..AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

28

1SXU10607C0201 | R contactor US catalog

24000 A
24000 A
0.08 mΩ

IORR2500 … IORR5100 contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without derating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
θ ≤ 55 °C
Ue max. ≤ 500 V, 50/60 Hz

With conductor cross-sectional area
Rated making capacity AC-1
Rated breaking capacity AC-1
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

M
3

IORR2500
IORR3200
IORR3800
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
500 V
25…60 Hz (for > 60...400 Hz please consult us)
2...4

IORR4500

IORR5100

2500 A
2000 mm²

4500 A
4000 mm²

5000 A
4000 mm²

3200 A
3000 mm²

3

2400 A
3200 A
2100 A
2810 A
θ ≤ 70 °C 1760 A
2350 A
2000 mm²
3000 mm²
1.5 x Ie AC-1 acc. to IEC 60947-4-1
1.5 x Ie AC-1 acc. to IEC 60947-4-1

380-415-440 V
500 V

3800 A
3000 mm²

3800
3330
2790
3000

A
A
A
mm²

4500
3950
3300
4000

A
A
A
mm²

5000
4390
3670
4000

A
A
A
mm²

Please consult us
Please consult us

Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Circuit breaker
1 s 20000 A
Rated short-time withstand current Icw
10 s 15000 A
at 40 °C ambient temperature,
30 s 8000 A
in free air from a cold state
1 min 6000 A
15 min 3000 A
Maximum making capacity
24000 A
Dynamical withstand of pole
24000 A
Impedance per pole
0.05 mΩ
AC-1 60 cycles/h
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
2 millions cycles
Max. switching frequency
600 cycles/h

21000 A
18000 A
10000 A
7000 A
4000 A
26000 A
26000 A
0.045 mΩ

24000 A
19000 A
11000 A
7500 A
4500 A
29000 A
29000 A
0.040 mΩ
40 cycles/h

28000 A
21000 A
12000 A
8000 A
5000 A
32000 A
32000 A
0.030 mΩ

30000 A
24000 A
13000 A
9000 A
5500 A
32000 A
32000 A
0.027 mΩ

1 million cycles
300 cycles/h

Note: These characteristics are suitable for IOR..AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

R contactor US catalog | 1SXU106047C0201

29

IORR63..MT … IORR500..MT contactors
Technical data
Main pole - Utilization characteristics according to IEC

3

AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without de-rating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
θ ≤ 55 °C
Ue max. ≤ 1000 V, 50/60 Hz

With conductor cross-sectional area
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

M
3

IORR63..MT
IORR125..MT
IORR200..MT
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V
25…60 Hz (for > 60...400 Hz please consult us)
2...4

IORR400..MT

IORR500..MT

85 A
25 mm²

85
76
θ ≤ 70 °C 68
25

A
A
A
mm²

170 A
70 mm²

275 A
150 mm²

400 A
240 mm²

550 A
400 mm²

170 A
150 A
135 A
70 mm²

260
230
205
150

400
350
300
240

550
490
400
400

160 A
105 A

260 A
180 A

400 A
280 A

550 A
380 A

240 kW
250 kW

400 kW
400 kW

540 kW
550 kW

200 A
2250 A
1280 A
680 A
450 A
250 A

315 A
3800 A
2080 A
1040 A
730 A
390 A

500 A
6000 A
3200 A
1600 A
1200 A
600 A

630 A
8400 A
4400 A
2200 A
1680 A
840 A

1280 A
850 A
2400 A
2500 A
1.20 mΩ

2100 A
1450 A
4000 A
4500 A
0.60 mΩ

4480 A
3050 A
7000 A
8000 A
0.40 mΩ

4480 A
3050 A
9000 A
10000 A
0.35 mΩ

690 V
1000 V

85 A
56 A

690 V
1000 V

80 kW
150 kW
80 kW
150 kW
10 x Ie AC-3 acc. to IEC 60947-4-1
8 x Ie AC-3 acc. to IEC 60947-4-1

A
A
A
mm²

A
A
A
mm²

A
A
A
mm²

Rated operational power AC-3

M
3

Rated making capacity AC-3
Rated breaking capacity AC-3
Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Ue ≤ 1000 V AC - gG type fuse
100 A
Ue ≤ 1000 V AC - L type fuse
1 s 1150 A
Rated short-time withstand current Icw
10 s 680 A
at 40 °C ambient temperature,
30 s 310 A
in free air from a cold state
1 min 230 A
15 min 120 A
Maximum breaking capacity
at 690 V 680 A
cos φ = 0.45
at 1000 V 450 A
(cos φ = 0.35 for Ie > 100 A)
Maximum making capacity
1300 A
Dynamical withstand of pole
1400 A
Impedance per pole
1.8 mΩ
AC-1 300 cycles/h
Maximum electrical switching frequency
AC-3 300 cycles/h
AC-4 150 cycles/h
Mechanical durability
Number of operating cycles
5 millions cycles
Max. switching frequency
1200 cycles/h

Note: These characteristics are suitable for IOR..MT-AMA and IOR..MT-AME contactors with latching versions (except for mechanical durability = 0.2 millions of operating cycles).

30

1SXU10607C0201 | R contactor US catalog

IORR800..MT … IORR2100..MT contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without derating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
θ ≤ 55 °C
Ue max. ≤ 690 V, 50/60 Hz

IORR800..MT
IORR1400..MT
IORR1700..MT
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V
25…60 Hz (for > 60...400 Hz please consult us)
2...4

IORR2100..MT

800 A
500 mm²

1850 A
1500 mm²

M
3

1700 A
1500 mm²

3

800 A
740 A
θ ≤ 70 °C 640 A

Ie / Rated operational current AC-1
Ue max. ≤ 1000 V, 50/60 Hz
With conductor cross-sectional area
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

1300 A
1000 mm²

1250 A
1100 A
900 A

1650 A
1450 A
1250 A

1850 A
1620 A
1400 A

800 A
500 mm²

1220 A
1000 mm²

1360 A
1500 mm²

1620 A
1500 mm²

690 V
1000 V

800 A
580 A

970 A
610 A

1170 A
680 A

1270 A
810 A

690 V
1000 V

780 kW
1000 KW
850 kW
900 kW
10 x Ie AC-3 acc. to IEC 60947-4-1
8 x Ie AC-3 acc. to IEC 60947-4-1

1200 kW
1000 kW

1300 kW
1200 kW

1600 A
11000 A
9000 A
5000 A
3600 A
1900 A

2000 A
13000 A
11000 A
6000 A
4200 A
2200 A

2500 A
15000 A
12000 A
7000 A
4600 A
2600 A

8500 A
5000 A
19000 A
19000 A
0.24 mΩ
150 cycles/h
150 cycles/h

11000 A
8500 A
21000 A
21000 A
0.18 mΩ
120 cycles/h
120 cycles/h

24000 A
24000 A
0.17 mΩ

θ ≤ 40 °C

Rated operational power AC-3

M
3

Rated making capacity AC-3
Rated breaking capacity AC-3
Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Circuit breaker
1250 A
1 s 9000 A
Rated short-time withstand current Icw
10 s 6400 A
at 40 °C ambient temperature,
30 s 3200 A
in free air from a cold state
1 min 2100 A
15 min 1200 A
Maximum breaking capacity
at 690 V 6400 A
cos φ = 0.45
at 1000 V 4650 A
(cos φ = 0.35 for Ie > 100 A)
Maximum making capacity
14000 A
Dynamical withstand of pole
14000 A
Impedance per pole
0.28 mΩ
AC-1 300 cycles/h
Maximum electrical switching frequency
AC-3 300 cycles/h
Mechanical durability
Number of operating cycles
5 millions cycles
Max. switching frequency
1200 cycles/h

2 millions cycles
600 cycles/h

Note: These characteristics are suitable for IOR..MT-AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

R contactor US catalog | 1SXU106047C0201

31

IORR2500..MT … IORR5100..MT contactors
Technical data
Main pole - Utilization characteristics according to IEC

3

AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without derating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
θ ≤ 55 °C
Ue max. ≤ 690 V, 50/60 Hz

With conductor cross-sectional area
Rated making capacity AC-1
Rated breaking capacity AC-1
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

IORR2500..MT
IORR3200..MT
IORR3800..MT
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
690 V
25…60 Hz (for > 60...400 Hz please consult us)
2...4

IORR4500..MT

IORR5100..MT

2200 A
2000 mm²

3500 A
3000 mm²

4000 A
4000 mm²

4500 A
4000 mm²

3500
3070
2570
3000

4000
3510
2940
4000

4500
3950
3300
4000

3000 A
3000 mm²

2200 A
3000 A
1930 A
2630 A
θ ≤ 70 °C 1620 A
2200 A
2000 mm²
3000 mm²
1.5 x Ie AC-1 acc. to IEC 60947-4-1
1.5 x Ie AC-1 acc. to IEC 60947-4-1

A
A
A
mm²

A
A
A
mm²

A
A
A
mm²

M
3

690 V Please consult us
Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Circuit breaker
1 s 20000 A
Rated short-time withstand current Icw
10 s 15000 A
at 40 °C ambient temperature,
30 s 8000 A
in free air from a cold state
1 min 6000 A
15 min 3000 A
Maximum making capacity
24000 A
Dynamical withstand of pole
24000 A
Impedance per pole
0.12 mΩ
AC-1 60 cycles/h
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
2 millions cycles
Max. switching frequency
600 cycles/h

21000 A
18000 A
10000 A
7000 A
4000 A
26000 A
26000 A
0.09 mΩ

24000 A
19000 A
11000 A
7500 A
4500 A
29000 A
29000 A
0.085 mΩ
40 cycles/h

28000 A
21000 A
12000 A
8000 A
5000 A
32000 A
32000 A
0.06 mΩ

1 million cycles
300 cycles/h

Note: These characteristics are suitable for IOR..MT-AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

32

1SXU10607C0201 | R contactor US catalog

30000 A
24000 A
13000 A
9000 A
5500 A
32000 A
32000 A
0.055 mΩ

Notes

R contactor US catalog | 1SXU106047C0201

33

4

34

1SXU10607C0201 | R contactor US catalog

DC circuit switching

Overview

36

Ordering details
Power circuit up to 1500 V DC
IORR..CC

AC operated

38

Power circuit up to 600 V DC acc. to UL / CSA
IORR..CC-U

AC operated

39

Power circuit up to 1500 V DC, with latching
IORR..CC-AMA

AC operated

40

IORR..CC-AME

AC operated

40

Technical data

42

Type and order code for R contactors

18

R contactor US catalog | 1SXU106047C0201

4

35

R contactors for DC circuit switching

Rated operational voltage
Ue up to

4

1500 V DC

Contactor
type

IORR63 ..CC

Number of poles Categories
in series

IORR125 ..CC

IORR200 ..CC

IORR400 ..CC

IORR500 ..CC

Ue max.

DC-1

500 V DC

Ie 85 A

170 A

275 A

400 A

550 A

DC-3 / DC-5

500 V DC

Ie 68 A

125 A

205 A

350 A

500 A

DC-1

1000 V DC

Ie 85 A

170 A

275 A

400 A*

550 A*

DC-3 / DC-5

1000 V DC

Ie 68 A

125 A

205 A

350 A

500 A

DC-1

1500 V DC

Ie 85 A*

170 A*

275 A*

400 A*

550 A*

DC-3 / DC-5

1500 V DC

Ie 68 A*

125 A*

205 A*

350 A*

500 A*

IORR1000-10-CC

IORR1400-10-CC

IORR1700-10-CC

IORR2100-10-CC

1000 A

1300 A

1700 A

2000 A

1 pole

2 poles

3 poles

* Ue max. = 1500 V DC, version with increased insulation for 1000 V DC < Ue ≤ 1500 V DC, please consult us.
*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

Contactors
UL / CSA approved
Rated operational voltage
Ue up to

600 V DC

Contactor
type

IORR800-10-CC
U max.

1 pole

General use

600 V DC

Ie 800 A

*120 V 60Hz coil and 2 N.O. + 2 N.C. auxiliary contacts as standard

36

1SXU10607C0201 | R contactor US catalog

4
IORR800..CC

IORR1000..CC

IORR1400..CC

IORR1700..CC

IORR2100..CC

IORR2500..CC

IORR3200..CC

IORR3800..CC

IORR4500..CC

IORR5100..CC

750 V DC

800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

600 V DC

720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

1500 V DC 800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

Ue max.

1000 V DC 720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

1500 V DC 800 A

1000 A

1250 A

1600 A

2000 A

2300 A

3200 A

3800 A

4500 A

5000 A

1500 V DC 720 A

1000 A

1250 A

1600 A

2000 A

On request

On request

On request

On request

On request

R contactor US catalog | 1SXU106047C0201

37

IORR..CC contactors
Power circuit up to 1500 V DC
Control circuit 120V 50/60 Hz
Description

1SBC104034F0000

IORR..CC contactors are used for controlling DC power circuits up to 1500 V DC.
These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available, as standard
Blowout in DC circuit switching
IORR800-10-CC

If the breaking current is lower than 50 % of the contactor rating, permanent magnet must be added, see
blowout code table.

Ordering details
Number Rated con- Auxiliary
IEC
of poles trol circuit contacts
DC-1
DC-3 / DC-5
ﬁtted (2)
voltage
Rated operationnal Rated operationnal
Uc
current voltage (3) current voltage (3)
(1)
A
V DC
A
V DC
V 50/60 Hz
85
500
68
500
1
120V
2 2
1000
1000
2
2 2
1500
1500
3
2 2
170
500
125
500
1
120V
2 2
1000
1000
2
2 2
1500
1500
3
2 2
275
500
205
500
1
120V
2 2
1000
1000
2
2 2
1500
1500
3
2 2
400
500
350
500
1
120V
2 2
1000
1000
2
2 2
1500
1500
3
2 2
550
500
500
500
1
120V
2 2
1000
1000
2
2 2
1500
1500
3
2 2
800
750
720
600
1
120V
2 2
1500
1000
2
2 2
1500
3
2 2
1000
750
1000
600
1
120V
2 2
1500
1000
2
2 2
1500
3
2 2
1250
750
1250
600
1
120V
2 2
1500
1000
2
2 2
1500
3
2 2
1600
750
1600
600
1
120V
2 2
1500
1000
2
2 2
1500
3
2 2
2000
750
2000
600
1
120V
2 2
1500
1000
2
2 2
1500
3
2 2
2300
750
On
On
1
120V
2 2
request request
1500
2
2 2
3
2 2
3200
750
On
On
1
120V
2 2
request request
1500
2
2 2
3
2 2
3800
750
On
On
1
120V
2 2
request request
1500
2
2 2
3
2 2
4500
750
On
On
1
120V
2 2
request request
1500
2
2 2
3
2 2
5000
750
On
On
1
120V
2 2
request request
1500
2
2 2
3
2 2

4

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.
(3) Power circuit above 1500 V DC, please consult us.

38

1SXU10607C0201 | R contactor US catalog

Type

Order code

Weight
pkg
(1 pce)

IORR63-10-CC
IORR63-20-CC
IORR63-30-CC
IORR125-10-CC
IORR125-20-CC
IORR125-30-CC
IORR200-10-CC
IORR200-20-CC
IORR200-30-CC
IORR400-10-CC
IORR400-20-CC
IORR400-30-CC
IORR500-10-CC
IORR500-20-CC
IORR500-30-CC
IORR800-10-CC-U
IORR800-20-CC
IORR800-30-CC
IORR1000-10-CC-U
IORR1000-20-CC
IORR1000-30-CC
IORR1400-10-CC-U
IORR1400-20-CC
IORR1400-30-CC
IORR1700-10-CC-U
IORR1700-20-CC
IORR1700-30-CC
IORR2100-10-CC-U
IORR2100-20-CC
IORR2100-30-CC
IORR2500-10-CC
IORR2500-20-CC
IORR2500-30-CC
IORR3200-10-CC
IORR3200-20-CC
IORR3200-30-CC
IORR3800-10-CC
IORR3800-20-CC
IORR3800-30-CC
IORR4500-10-CC
IORR4500-20-CC
IORR4500-30-CC
IORR5100-10-CC
IORR5100-20-CC
IORR5100-30-CC

FPL7116116R2113
FPL7116216R2113
On request
FPL7416115R2113
FPL7416215R2113
On request
FPL7616115R2113
FPL7616215R2113
On request
FPL9416115R2113
FPL9416215R2113
On request
FPL8316115R2113
FPL8316215R2113
On request
FPL8616195R2113
FPL8616215R2113
FPL8616315R2113
FPL8716195R2113
FPL8716215R2113
FPL8716315R2113
FPL6616195R2113
FPL6116215R2113
FPL6116315R2113
FPL6216195R2113
FPL6216215R2113
FPL6216315R2113
FPL6316195R2113
FPL6316215R2113
FPL6316315R2113
FPL6716115R2113
FPL6716215R2113
FPL6716315R2113
FPL6516115R2113
FPL6516215R2113
FPL6516315R2113
FPL6616115R2113
FPL6616215R2113
FPL6616001R2113
FPL6816115R2113
FPL6816215R2113
FPL6816001R2113
FPL6916115R2113
FPL6916002R2113
FPL6916001R2113

kg
3.2
4.2
5.2
4.2
6.2
8.2
6.6
9.6
12.6
13.9
19.7
25.5
13.9
19.7
25.5
30
40
51
31
42
50
32
42
52
34
47
61
37
52
68
45
71
On request
52
83
On request
58
95
On request
On request

On request

IORR..CC-U contactors
Power circuit up to 600 V DC acc. to UL / CSA
Control circuit 120V 50/60 Hz
Description

1SBC104034F0000

IORR..CC-U contactors are used for controlling DC power circuits up to 600 V DC.

IORR800-10-CC-U

These contactors are designed with:
– One N.O. Pole
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available, as standard
For R800 … R2100 contactors, if the breaking current is lower than 50 % of the contactor rating, permanent
magnet must be added: see blowout code table.

Ordering details
UL / CSA
General use rating
600 V DC

A
800
1000
1300
1700
2000

Number
of poles

1
1
1
1
1

Rated con- Auxiliary
trol circuit contacts
ﬁtted (2)
voltage
Uc
(1)
V 50/60 Hz
120V
2 2
120V
2 2
120V
2 2
120V
2 2
120V
2 2

Type

Order code

Weight

4

pkg
(1 pce)

IORR800-10-CC-U
IORR1000-10-CC-U
IORR1400-10-CC-U
IORR1700-10-CC-U
IORR2100-10-CC-U

FPL8616195R2113
FPL8716195R2113
FPL6116195R2113
FPL6216195R2113
FPL6316195R2113

kg
30
31
32
34
37

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.

R contactor US catalog | 1SXU106047C0201

39

IORR..CC-AMA and IORR..CC-AME contactors
Power circuit up to 1500 V DC, with latching
Control circuit 120V 50/60 Hz
Description

1SBC104044F0000

IORR..CC-AMA and IORR..CC-AME contactors are used for controlling DC power circuits up to 1500 V DC.

IORR800-30-CC-AME

These contactors are designed with:
– magnetic latching, AMA types
– mechanical latching, AME types
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contact available for AMA version, as standard
– 2 NO + 2 NC auxiliary contacts available for AME version

Ordering details
IEC
DC-1
Rated operational
current voltage
(3)
A
V DC

4

DC-3 / DC-5
Rated operational
current voltage
(3)
A
V DC

Magnetical latching
85
500
68
1000
1500
170
500
125
1000
1500
275
500
205
1000
1500
Mechanical latching
400
500
350
1000
1500
550
500
500
1000
1500
800
750
720
1500
1000
750
720
1500
1250
750
720
1500
1600
750
720
1500
2000
750
720
1500
2300
750
On
request
1500
3200
750
On
request
1500
3800
750
On
request
1500
4500
750
On
request
1500
5000
750
On
request

Number Rated con- Auxiliary Type
of poles trol circuit contacts
ﬁtted (2)
voltage
Uc
(1)
V 50/60 Hz

500
1000
1500
500
1000
1500
500
1000
1500

1
2
3
1
2
3
1
2
3

120V

500
1000
1500
500
1000
1500
600
1000
1500
600
1000
1500
600
1000
1500
600
1000
1500
600
1000
1500
On
request

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
1
2
1

120V

On
request
On
request
On
request
On
request

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V
120V
120V

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.
(3) Power circuit above 1500 V DC, please consult us.

40

1SXU10607C0201 | R contactor US catalog

Order code

Weight
pkg
(1 pce)
kg

2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2

IORR63-10-CC-AMA
IORR63-20-CC-AMA
IORR63-30-CC-AMA
IORR125-10-CC-AMA
IORR125-20-CC-AMA
IORR125-30-CC-AMA
IORR200-10-CC-AMA
IORR200-20-CC-AMA
IORR200-30-CC-AMA

FPL7116136R2123
FPL7116236R2123
On request
FPL7416135R2123
FPL7416235R2123
On request
FPL7616135R2123
FPL7616235R2123
On request

2.9
3.9
4.9
3.9
5.9
7.9
6.2
9.2
12.2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

IORR400-10-CC-AME
IORR400-20-CC-AME
IORR400-30-CC-AME
IORR500-10-CC-AME
IORR500-20-CC-AME
IORR500-30-CC-AME
IORR800-10-CC-AME
IORR800-20-CC-AME
IORR800-30-CC-AME
IORR1000-10-CC-AME
IORR1000-20-CC-AME
IORR1000-30-CC-AME
IORR1400-10-CC-AME
IORR1400-20-CC-AME
IORR1400-30-CC-AME
IORR1700-10-CC-AME
IORR1700-20-CC-AME
IORR1700-30-CC-AME
IORR2100-10-CC-AME
IORR2100-20-CC-AME
IORR2100-30-CC-AME
IORR2500-10-CC-AME
IORR2500-20-CC-AME
IORR2500-30-CC-AME
IORR3200-10-CC-AME
IORR3200-20-CC-AME
IORR3200-30-CC-AME
IORR3800-10-CC-AME
IORR3800-20-CC-AME
IORR4500-10-CC-AME
IORR4500-20-CC-AME
IORR5100-10-CC-AME

FPL9416125R2223
FPL9416225R2223
FPL9416325R2223
FPL8316125R2223
FPL8316225R2223
FPL8316325R2223
FPL8616125R2223
FPL8616225R2223
FPL8616325R2223
FPL8716125R2223
FPL8716225R2223
FPL8716325R2223
FPL6116125R2223
FPL6116225R2223
FPL6116325R2223
FPL6216125R2223
FPL6216225R2223
FPL6216325R2223
FPL6316125R2223
FPL6316225R2223
FPL6316325R2223
FPL6716125R2223
FPL6716225R2223
FPL6716325R2223
FPL6516125R2223
FPL6516225R2223
FPL6516325R2223
FPL6616125R2223
FPL6616225R2223
FPL6816125R2223
FPL6816225R2223
FPL6916125R2223

18.4
24.2
30
18.4
24.2
30
40
50
61
40
50
61
42
52
62
43
57
71
46
62
78
On
request
On
request
On
request
On
request
On
request

Notes

R contactor US catalog | 1SXU106047C0201

41

IORR63..CC … IORR500..CC contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
DC-1 Utilization category, L/R ≤ 1 ms
Ie / Rated operational current DC-1
1 pole

IORR63..CC
IORR125..CC
IORR200..CC
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V DC (1500 V DC with increased insulation (1))
1...4

IORR400..CC

IORR500..CC

85 A
25 mm²

170 A
70 mm²

275 A
150 mm²

400 A
240 mm²

550 A
400 mm²

≤ 500 V

85 A

170 A

275 A

400 A

550 A

≤ 1000 V
≤ 1500 V (1)

85 A
-

170 A
-

275 A
-

400 A
400 A

550 A
550 A

≤ 1500 V (1)

85 A

170 A

275 A

400 A

550 A

≤ 500 V

68 A

125 A

205 A

350 A

500 A

≤ 1000 V

68 A

125 A

205 A

350 A

500 A

≤ 1500 V (1)

68 A

125 A

205 A

350 A

500 A

≤ 500 V

68 A

125 A

205 A

350 A

500 A

≤ 1000 V

68 A

125 A

205 A

350 A

500 A

68 A
1150 A
680 A
310 A
230 A
120 A

125 A
2250 A
1280 A
680 A
450 A
250 A

205 A
3800 A
2080 A
1040 A
730 A
390 A

350 A
6000 A
3200 A
1600 A
1200 A
600 A

500 A
8400 A
4400 A
2200 A
1680 A
840 A

272 A
272 A
272 A
1300 A
1400 A
1.8 mΩ
120 cycles/h

500 A
500 A
500 A
2400 A
2500 A
1.20 mΩ

820 A
820 A
820 A
4000 A
4500 A
0.60 mΩ

1400 A
1400 A
1400 A
7000 A
8000 A
0.40 mΩ

2000 A
2000 A
2000 A
9000 A
10000 A
0.35 mΩ

2 poles in series

4

3 poles in series

DC-3 Utilization category, L/R ≤ 2 ms
Ie / Rated operational current DC-3
1 pole

2 poles in series

3 poles in series

DC-5 Utilization category, L/R ≤ 7.5 ms
Ie / Rated operational current DC-5
1 pole

2 poles in series

3 poles in series

Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Rated breaking capacity
(L/R ≤ 15 ms)

Maximum making capacity
Dynamical withstand of pole
Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Maximum switching frequency

≤ 1500 V (1)
1s
10 s
30 s
1 min
15 min
1 pole 500 V
2 poles 1000 V
3 poles 1500 V

5 millions cycles
1200 cycles/h

(1) Version with increased insulation for 1000 V < Ue < 1500 V, please consult us.
Notes: - The arc switching on DC is more difﬁcult than on AC
- For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces: L/R < 1 ms; inductive loads such as shunt motor:
L/R < 2 ms; series motor: L/R < 7.5 ms
- The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs
- All the poles required for breaking must be connected, in series, between the load and the source polarity not linked to the earth
- Connection of the poles in series by the user, according to the above diagrams. The connection of the poles in series helps in the elimination of the arcs
- These characteristics are suitable for IOR..CC-AMA and IOR..CC-AME contactor latching versions (except for mechanical durability = 0.2 millions of operating cycles).

42

1SXU10607C0201 | R contactor US catalog

IORR800..CC … IORR2100..CC contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
DC-1 Utilization category, L/R ≤ 1 ms
Ie / Rated operational current DC-1
1 pole

IORR800..CC
IORR1000..CC
IORR1400..CC
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1500 V DC
1...4

IORR1700..CC

IORR2100..CC

800 A
500 mm²

1000 A
600 mm²

1300 A
1000 mm²

1700 A
1500 mm²

2000 A
1500 mm²

≤ 750 V

800 A

1000 A

1250 A

1600 A

2000 A

≤ 1000 V
≤ 1500 V

800 A
800 A

1000 A
1000 A

1250 A
1250 A

1600 A
1600 A

2000 A
2000 A

≤ 600 V

720 A

1000 A

1250 A

1600 A

2000 A

≤ 1000 V

720 A

1000 A

1250 A

1600 A

2000 A

≤ 1500 V

720 A

1000 A

1250 A

1600 A

2000 A

≤ 600 V

720 A

1000 A

1250 A

1600 A

2000 A

≤ 1000 V

720 A

1000 A

1250 A

1600 A

2000 A

≤ 1500 V
1s
10 s
30 s
1 min
15 min

720 A
9000 A
6400 A
3200 A
2100 A
1200 A

1000
9000
6400
3200
2100
1200

1250 A
11000 A
9000 A
5000 A
3600 A
1900 A

1600 A
13000 A
11000 A
6000 A
4200 A
2200 A

2000 A
15000 A
12000 A
7000 A
4600 A
2600 A

2880 A
2880 A
2880 A
14000 A
14000 A
0.28 mΩ
120 cycles/h

4000 A
4000 A
4000 A
14000 A
14000 A
0.24 mΩ

5000 A
5000 A
5000 A
19000 A
19000 A
0.18 mΩ
60 cycles/h

6400 A
6400 A
6400 A
21000 A
21000 A
0.12 mΩ

8000 A
8000 A
8000 A
24000 A
24000 A
0.10 mΩ

2 poles in series

4

DC-3 Utilization category, L/R ≤ 2 ms
Ie / Rated operational current DC-3
1 pole

2 poles in series

3 poles in series

DC-5 Utilization category, L/R ≤ 7.5 ms
Ie / Rated operational current DC-5
1 pole

2 poles in series

3 poles in series

Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Rated breaking capacity
(L/R ≤ 15 ms)

Maximum making capacity
Dynamical withstand of pole
Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Maximum switching frequency

1 pole 600 V
2 poles 1000 V
3 poles 1500 V

5 millions cycles
1200 cycles/h

A
A
A
A
A
A

2 millions cycles
600 cycles/h

Notes: - The arc switching on DC is more difﬁcult than on AC
- For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces: L/R < 1 ms; inductive loads such as shunt motor:
L/R < 2 ms; series motor: L/R < 7.5 ms
- The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs
- All the poles required for breaking must be connected, in series, between the load and the source polarity not linked to the earth
- Connection of the poles in series by the user, according to the above diagrams. The connection of the poles in series helps in the elimination of the arcs
- These characteristics are suitable for IOR..CC-AME contactor latching versions (except for mechanical durability = 0.2 millions of operating cycles).

R contactor US catalog | 1SXU106047C0201

43

IORR2500..CC … IORR5100..CC contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
DC-1 Utilization category, L/R ≤ 1 ms
Ie / Rated operational current DC-1
1 pole

IORR2500..CC
IORR3200..CC
IORR3800..CC
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1500 V DC
1...4

IORR4500..CC

IORR5100..CC

2300 A
2000 mm²

3200 A
3000 mm²

3800 A
3000 mm²

4500 A
4000 mm²

5000 A
4000 mm²

≤ 750 V

2300 A

3200 A

3800 A

4500 A

5000 A

≤ 1000 V
≤ 1500 V

2300 A
2300 A

3200 A
3200 A

3800 A
3800 A

4500 A
4500 A

5000 A
5000 A

21000 A
18000 A
10000 A
7000 A
4000 A
26000 A
26000 A
0.06 mΩ

24000 A
19000 A
11000 A
7500 A
4500 A
29000 A
29000 A
0.05 mΩ
40 cycles/h

28000 A
21000 A
12000 A
8000 A
5000 A
32000 A
32000 A
0.04 mΩ

30000 A
24000 A
13000 A
9000 A
5500 A
32000 A
32000 A
0.03 mΩ

2 poles in series

4

DC-3 Utilization category, L/R ≤ 2 ms
Ie / Rated operational current DC-3
For voltage up to 1500 V
DC-5 Utilization category, L/R ≤ 7.5 ms
Ie / Rated operational current DC-5
For voltage up to 1500 V
Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Maximum making capacity
Dynamical withstand of pole
Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Maximum switching frequency

Please consult us

1s
10 s
30 s
1 min
15 min

Please consult us
20000 A
15000 A
8000 A
6000 A
3000 A
24000 A
24000 A
0.09 mΩ
60 cycles/h
2 millions cycles
600 cycles/h

1 million cycles
300 cycles/h

Notes: - The arc switching on DC is more difﬁcult than on AC
- For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces: L/R < 1 ms; inductive loads such as shunt motor:
L/R < 2 ms; series motor: L/R < 7.5 ms
- The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs
- All the poles required for breaking must be connected, in series, between the load and the source polarity not linked to the earth
- Connection of the poles in series by the user, according to the above diagrams. The connection of the poles in series helps in the elimination of the arcs
- These characteristics are suitable for IOR..CC-AME contactor latching versions (except for mechanical durability = 0.2 millions of operating cycles).

44

1SXU10607C0201 | R contactor US catalog

Notes

R contactor US catalog | 1SXU106047C0201

45

5

46

1SXU10607C0201 | R contactor US catalog

Advanced applications

N.O. / N.C. main poles combination
Presentation

48

Power circuit up to 690 V AC
NORR, NORR..MT

AC operated

49

Power circuit up to 1500 V DC
NORR, NORR..CC

AC operated

50

Technical data

51

Power circuit coupling
Presentation

54

Power circuit up to 1000 V AC or 1500 V DC
LORR

AC operated

5

55

Technical data

57

Slip-ring motor control

60

Rotor voltages up to 1500 V AC
FORR1000 … FORR3800

AC operated

62

AC operated

63

AC operated

64

AC operated

65

Rotor voltages up to 2500 V AC
FORR1000S … FORR2100S
Rotor voltages up to 3500 V AC
FORR1000NSP … FORR2100NSP
Rotor voltages up to 4200 V AC
FORR1000SPE … FORR2100SPE

Closed transition star-delta starting of three-phase
asynchronous motors

66

Field discharge contactors AM-CC-JOR and AMF-CC-JOR

67

Autotransformer starters

68

Type and order code for R contactors

18

R contactor US catalog | 1SXU106047C0201

47

N.O. / N.C. main poles combination
NOR contactors

Description
NOR contactors are built with a combination of N.O. and N.C. poles:
– AC switching: NOR..MT up to 690 V AC
– DC switching: NOR..CC up to 1500 V DC in standard.
– For low current breaking, permanent magnet must be added.
2 NO + 2 NC auxiliary contacts are fitted as standard. For additional
auxiliary contacts refer to “Auxiliary contact fitting details.”
Example of use :
Change-over contactor with 2 N.C. poles + 2 N.O. poles.
Block diagrams
These contactors are suitable for controlling 2 separate circuits, i.e.
2 loads with 2 separate supplies, or 1 circuit including 2 separate loads
with a single supply (diagrams on left column).
When the contactor operates there is no mechanical overlapping between
the N.O. poles and the N.C. poles: BREAK before MAKE operation.

R1

R3

5

7

R2

R4

6

8

R0114D

5

These contactors are not suitable for a reversing starter or star-delta
starter, or for controlling a single load from 2 separate supplies.

!

2 N.C. poles + 2 N.O. poles

Supply

R1

A2

R2

R3

5

R4

6

Load

7

8
Load

R0115DG

A1

Single supply and 2 separate loads

A1

R1

A2

R2
Load

The breaking and making capacities of the N.C. poles are identical to
those of the N.O. poles.

Main
supply

R3

5

R4

6

7

8
Load

R0116DG

Back-up
supply

2 separate supplies and 2 separate loads

48

Operation
The N.O. and N.C. poles are set-up without any mechanical overlap:
– as the electro-magnet closes, the N.C. pole(s) BREAK before the N.O.
pole(s) MAKE
– as the electro-magnet opens, the N.O. pole(s) BREAK before the N.C.
pole(s) MAKE.

1SXU10607C0201 | R contactor US catalog

Other variants
Please consult us for :
– NOR..AMA and NOR..AME with latching
– JOR types: version with overlapping between N.O. and N.C. main poles.

1SBC104042F0000

NORR, NORE, NORR..MT and NORE..MT contactors
Power circuit up to 690 V AC
Control circuit 120V 50/60 Hz

NORR125-02-MT

Description
NORR..MT and NORE..MT contactors with N.O. and N.C. main poles are used for controlling AC power
circuits up to 690 V AC.
NORR400 ... NORR800 and NORE400 ... NORE800 contactors with N.O. and N.C. main poles are used for
controlling AC power circuits up to 500 V AC.
These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC or DC operated
– 2 NO + 2 NC auxiliary contacts available, as standard.

AC operated
IEC
Rated operationnal
current
voltage (3)
θ ≤ 40 °C
AC-1
A
V AC
63
690

125

690

200

690

315

500

800

500

690

(1)
(2)
(3)
(4)

Number
of poles
(4)

0
2
3
0
2
3
0
2
3
0
2
3
0
2
3
0
2
3

2
1
1
2
1
1
2
1
1
2
1
1
2
1
1
2
1
1

Rated con- Auxiliary
trol circuit contacts
ﬁtted (2)
voltage
Uc
(1)
V 50/60 Hz
120V
2 2
2 2
2 2
120V
2 2
2 2
2 2
120V
2 2
2 2
2 2
120V
2 2
2 2
2 2
120V
2 2
2 2
2 2
120V
2 2
2 2
2 2

Type

Order code

Weight
pkg
(1 pce)

NORR63-02-MT
NORR63-21-MT
NORR63-31-MT
NORR125-02-MT
NORR125-21-MT
NORR125-31-MT
NORR200-02-MT
NORR200-21-MT
NORR200-31-MT
NORR400-02
NORR400-21
NORR400-31
NORR800-02
NORR800-21
NORR800-31
NORR800-02-MT
NORR800-21-MT
NORR800-31-MT

FPL7155216R2113
FPL7155516R2113
FPL7155716R2113
FPL7455215R2113
FPL7455515R2113
FPL7455715R2113
FPL7655215R2113
FPL7655515R2113
FPL7655715R2113
FPL9445215R2113
FPL9445515R2113
FPL9445715R2113
FPL8645215R2113
FPL8645515R2113
FPL8645715R2113
FPL8655215R2113
FPL8655515R2113
FPL8655715R2113

5

kg
4.2
3.9
4.9
6.2
8.2
9
9.6
10
12.2
12
15
18
38
48
58
40
51
62

Other control voltages, please consult us.
Other auxiliary contact arrangements, please consult us.
Power circuit above 690 V AC, please consult us.
Other main pole combinations, please consult us.

R contactor US catalog | 1SXU106047C0201

49

1SBC104042F0000

NORR, NORE, NORR..CC and NORE..CC contactors
Power circuit up to 1500 V DC
Control circuit 120V 50/60 Hz

NORR125-02-CC

Description
NORR..CC and NORE..CC contactors with N.O. and N.C. main poles are used for controlling DC power
circuits up to 1500 V DC. NORR and NORE400 up to 440 V DC.
These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC or DC operated
– 2 NO + 2 NC auxiliary contacts available, as standard.

AC operated
Number
of poles
(4)

IEC
Rated operationnal
current
voltage (3)
DC-1
DC-3
DC-5
A
63

A
63

125

125

200

200

315

315

800

720

5

V DC
1000
1000
1000
1000
1000
1000
440
440
1000
1500

V DC
500
1000
500
500
500
1000
500
500
500
1000
500
500
220
440
220
220
500
1000
500
500

0
0
2
3
0
0
2
3
0
0
2
3
0
0
2
3
0
0
2
3

1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1

Rated con- Auxiliary Type
trol circuit contacts
ﬁtted (2)
voltage
Uc
(1)
V 50/60 Hz
120V

120V

120V

120V

120V

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.
(3) Please consult us for power circuit above:
- 1000 V DC for ratings 63…500 A
- 1500 V DC for ratings 800 A.
(4) Other main pole combinations, please consult us.

50

1SXU10607C0201 | R contactor US catalog

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

NORR63-01-CC
NORR63-02-CC
NORR63-21-CC
NORR63-31-CC
NORR125-01-CC
NORR125-02-CC
NORR125-21-CC
NORR125-31-CC
NORR200-01-CC
NORR200-02-CC
NORR200-21-CC
NORR200-31-CC
NORR400-01
NORR400-02
NORR400-21
NORR400-31
NORR800-01-CC
NORR800-02-CC
NORR800-21-CC
NORR800-31-CC

Order code

Weight
pkg
(1 pce)

FPL7146116R2113
FPL7146216R2113
FPL7146516R2113
FPL7146716R2113
FPL7446115R2113
FPL7446215R2113
FPL7446515R2113
FPL7446715R2113
FPL7646115R2113
FPL7646215R2113
FPL7646515R2113
FPL7646715R2113
FPL9445115R2113
FPL9445215R2113
FPL9445515R2113
FPL9445715R2113
FPL8646115R2113
FPL8646215R2113
FPL8646515R2113
FPL8646715R2113

kg
3.2
4.2
3.9
4.9
4.2
6.2
8.2
9
6.6
9.6
10
12.2
9
12
15
18
28.6
40
51
62

NORR63..MT … NORR800..MT contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Rated frequency (without de-rating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 Utilization category
For air temperature close to contactor
θ ≤ 40 °C
Ie / Rated operational current AC-1
Ue max. ≤ 690 V, 50/60 Hz
θ ≤ 55 °C

With conductor cross-sectional area
Rated making capacity AC-1
Rated breaking capacity AC-1
AC-3 Utilization category
For air temperature close to contactor θ ≤ 55 °C
Ie / Max. rated operational current AC-3

NORR63..MT NORR125..MT NORR200..MT NORR800..MT
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
690 V
25…60 Hz (for > 60...400 Hz please consult us)
2…4

500 V

63 A
16 mm²

125 A
50 mm²

63 A
125 A
56 A
110 A
θ ≤ 70 °C 50 A
100 A
16 mm²
50 mm²
1.5 x Ie AC-1 acc. to IEC 60947-4-1
1.5 x Ie AC-1 acc. to IEC 60947-4-1

NORR400 NORR800

200 A
95 mm²

800 A
500 mm²

315 A
185 mm²

800 A
500 mm²

200 A
180 A
160 A
95 mm²

800
710
640
500

315
280
250
185

800
710
640
500

A
A
A
mm²

A
A
A
mm²

A
A
A
mm²

5

M
3

690 V Please consult us
Short-circuit protection device for contactors
without thermal overload relay - Motor protection excluded
Ue ≤ 1000 V AC - gG type fuse
80 A
Ue ≤ 1000 V AC - L type fuse
1 s 850 A
Rated short-time withstand current Icw
10 s 500 A
at 40 °C ambient temperature,
30 s 250 A
in free air from a cold state
1 min 230 A
15 min 120 A
Impedance per pole
1.8 mΩ
AC-1 300 cycles/h
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
3 millions cycles

Maximum switching frequency

1200 cycles/h

160 A
2250 A
1280 A
680 A
450 A
250 A
1.20 mΩ

250 A
3800 A
2080 A
1040 A
730 A
390 A
0.60 mΩ

1000 A
7500 A
6000 A
3000 A
2000 A
1200 A
0.28 mΩ

630 A
5000 A
2500 A
1250 A
870 A
460 A
0.40 mΩ
300 cycles/h

1000 A
7500 A
6000 A
3000 A
2000 A
1200 A
0.18 mΩ

1 million cycles

3 millions
1 million
cycles
cycles
1200 cycles/h

Note: These characteristics are suitable for NOR..MT-AMA and NOR..MT-AME contactors with latching versions (except for mechanical durability = 0.2 millions of operating cycles).

R contactor US catalog | 1SXU106047C0201

51

NORR63..CC … NORR800..CC contactors
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Contactor types
Standards
Rated operational voltage Ue max.
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C
With conductor cross-sectional area
DC-1 Utilization category, L/R ≤ 1 ms
Ie / Rated operational current DC-1
1 pole

2 poles in series

NORR63..CC
NORR125..CC
NORR200..CC
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V DC (1500 V DC with increased insulation (1))
1…4

NORR800..CC

NORR400

63 A
16 mm²

125 A
50 mm²

200 A
95 mm²

800 A
500 mm²

315 A
185 mm²

≤ 220 V
≤ 500 V
≤ 440 V
≤ 1000 V
≤ 1500 V

63 A
63 A
-

125 A
125 A
-

200 A
200 A
-

800 A
800 A
800 A

315 A
315 A
-

≤ 1500 V (1)

63 A

125 A

200 A

800 A

-

≤ 220 V
≤ 500 V

63 A

125 A

200 A

720 A

315 A
-

≤ 440 V
≤ 1000 V

63 A

125 A

200 A

720 A

315 A
-

≤ 1500 V (1)

63 A

125 A

200 A

720 A

-

≤ 220 V
≤ 500 V

63 A

125 A

200 A

720 A

315 A
-

≤ 440 V
≤ 1000 V

63 A

125 A

200 A

720 A

315 A
-

63 A
850 A
500 A
250 A
170 A
90 A

125 A
1700 A
900 A
450 A
310 A
180 A

200 A
3100 A
1600 A
800 A
560 A
300 A

720 A
9000 A
6400 A
3200 A
2100 A
1200 A

5000 A
2500 A
1250 A
870 A
460 A

252 A
252 A
252 A
1.8 mΩ
120 cycles/h

500 A
500 A
500 A
1.20 mΩ

800 A
800 A
800 A
0.60 mΩ

2880 A
2880 A
2880 A
0.18 mΩ

1260 A (220 V)
1260 A (440 V)
0.40 mΩ
120 cycles/h

1 million cycles

3 million cycles
1200 cycles/h

440 V DC

3 poles in series

5
DC-3 Utilization category, L/R ≤ 2 ms
Ie / Rated operational current DC-3
1 pole

2 poles in series

3 poles in series

DC-5 Utilization category, L/R ≤ 7.5 ms
Ie / Rated operational current DC-5
1 pole

2 poles in series

3 poles in series

Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Rated breaking capacity
(L/R ≤ 15 ms)

Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Maximum switching frequency

≤ 1500 V (1)
1s
10 s
30 s
1 min
15 min
1 pole 500 V
2 poles 1000 V
3 poles 1500 V

3 millions cycles
1200 cycles/h

(1) NOR63 ... NOR200: version with increased insulation for 1000 V < Ue < 1500 V, please consult us.
Notes: - The arc switching on DC is more difﬁcult than on AC
- For selecting a contactor, it is essential to determine the current, the voltage, an the L/R time constant of the controlled load
- For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces: L/R < 1 ms; inductive loads such as shunt motor:
L/R < 2 ms; series motor: L/R < 7.5 ms
- The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs
- All the poles required for breaking must be connected, in series, between the load and the source polarity not linked to the earth
- Connection of the poles in series by the user, according to the above diagrams. The connection of the poles in series helps in the elimination of the arcs
- These characteristics are suitable for NOR..CC-AMA and NOR..CC-AME contactor latching versions (except for mechanical durability = 0.2 millions of operating cycles).

52

1SXU10607C0201 | R contactor US catalog

Notes

R contactor US catalog | 1SXU106047C0201

53

Power circuit coupling
LOR couplers

Description
LOR couplers are built without blowout coil and arc chutes. They are not
suitable for breaking on-load at voltages above 24 V AC or DC.
– AC switching up to 1000 V AC
– DC switching up to:
- 1000 V DC for R85 … R550
- 1500 V DC for R800 … R5100
For other voltages, please consult us.
2 NO + 2 NC auxiliary contacts are fitted as standard. For additional
auxiliary contact, refer to "Auxiliary contact fitting details".
Example of use
– Automatic short-circuiting of the starting resistances of a slip-ring or
DC motors without the possibility of opening on-load
– Electrolytic installations and electro-plating plants
– Induction furnaces (please consult us).

5

Other variants:
Please consult us for:
– LOR couplers with N.C. poles
– LOR..AMA and LOR..AME couplers with latching.

54

1SXU10607C0201 | R contactor US catalog

1SBC104043F0000

LORR couplers
Power circuit up to 1000 V AC or 1500 V DC
Control circuit 120V 50/60 Hz

LORR550-20

Description
LORR are used for controlling:
– AC power circuits up to 1000 V AC

– DC power circuits up to:
- 1000 V DC for ratings 85…550 A
- 1500 V DC for ratings 800…5100 A

They are not suitable for breaking on-load at voltages above 24 V AC or DC.
These contactors are designed with:
– variable number of poles according to the application
– control circuit: AC operated
– 2 NO + 2 NC auxiliary contacts available, as standard.

Ordering details
Conventional
Rated
thermal current operational voltage
lth (θ ≤ 40 °C)
A
90

V AC
1000

V DC (3)
1000

185

1000

1000

300

1000

1000

420

1000

1000

630

1000

1000

1100

1000

1400

1000

1700

1000

2100

1000

2500

1000

3200

1000

3800

1000

4500

1000

5100

1000

1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1500
1000
1500
1500
1000
1500

Number Rated control
of poles circuit voltage
Uc
(1)
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
1
2

V 50/60 Hz
120V

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V

120V
120V

Auxiliary Type
contacts
ﬁtted (2)

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

LORR85-10
LORR85-20
LORR85-30
LORR85-40
LORR170-10
LORR170-20
LORR170-30
LORR170-40
LORR260-10
LORR260-20
LORR260-30
LORR260-40
LORR400-10
LORR400-20
LORR400-30
LORR400-40
LORR550-10
LORR550-20
LORR550-30
LORR550-40
LORR800-10
LORR800-20
LORR800-30
LORR800-40
LORR1400-10
LORR1400-20
LORR1400-30
LORR1400-40
LORR1700-10
LORR1700-20
LORR1700-30
LORR1700-40
LORR2100-10
LORR2100-20
LORR2100-30
LORR2100-40
LORR2500-10
LORR2500-20
LORR2500-30
LORR2500-40
LORR3200-10
LORR3200-20
LORR3200-30
LORR3200-40
LORR3800-10
LORR3800-20
LORR3800-30
LORR3800-40
LORR4500-10
LORR4500-20
LORR4500-30
LORR5100-10
LORR5100-20

Order code

Weight
pkg
(1 pce)

FPL7235110R2113
FPL7235210R2113
FPL7235310R2113
FPL7235410R2113
FPL7535110R2113
FPL7535210R2113
FPL7535310R2113
FPL7535410R2113
FPL7835110R2113
FPL7835210R2113
FPL7835310R2113
FPL7835410R2113
FPL9435110R2113
FPL9435210R2113
FPL9435310R2113
FPL9435410R2113
FPL8435110R2113
FPL8435210R2113
FPL8435310R2113
FPL8435410R2113
FPL8635110R2113
FPL8635210R2113
FPL8635310R2113
FPL8635410R2113
FPL6135110R2113
FPL6135210R2113
FPL6135310R2113
FPL6135410R2113
FPL6235110R2113
FPL6235210R2113
FPL6235310R2113
FPL6235410R2113
FPL6335110R2113
FPL6335210R2113
FPL6335310R2113
FPL6335410R2113
FPL6735110R2113
FPL6735210R2113
FPL6735310R2113
FPL6735410R2113
FPL6535110R2113
FPL6535210R2113
FPL6535310R2113
FPL6535001R2113
FPL6635110R2113
FPL6635210R2113
FPL6635002R2113
FPL6635003R2113
FPL6835110R2113
FPL6835210R2113
FPL6835001R2113
FPL6935110R2113
FPL6935001R2113

5

kg
2.6
3
3.4
3.8
3.2
4.1
5
5.9
4.7
5.9
7.1
8.3
11.4
14.7
18
21.3
11.4
14.7
18
21.3
29
34
42
54
30
36
44
56
34
42
50
66
36
44
52
68
On
request
On
request
On
request
On
request
On
request

(1) Other control voltages, please consult us.
(2) Other auxiliary contact arrangements, please consult us.
(3) Please consult us for power circuit above 1000 V AC or 1500 V DC.

R contactor US catalog | 1SXU106047C0201

55

LORR85 ... LORR550 couplers
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Couplers types
Standards
Rated operational voltage Ue max.
Rated frequency (without derating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open couplers, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 / DC-1 Utilization category
For air temperature close to couplers
θ ≤ 40 °C
Ie / Rated operational current AC-1 / DC-1
θ ≤ 55 °C
Ue max. ≤ 690 V, 50/60 Hz

LORR85
LORR170
LORR260
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V
25…60 Hz (for > 60…400 Hz please contact us)
1…4

LORR400

LORR550

90 A
35 mm²

420 A
300 mm²

630 A
400 mm²

420
370
330
300

630
570
500
400

185 A
95 mm²

300 A
185 mm²

90 A
185 A
300 A
82 A
170 A
270 A
θ ≤ 70 °C 72 A
150 A
240 A
35 mm²
95 mm²
185 mm²
1000 V max. 1.5 x Ie / AC-1 or DC-1 acc. to IEC 60947-4-1
24 V max. 1.5 x Ie / AC-1 or DC-1 acc. to IEC 60947-4-1

With conductor cross-sectional area
Rated making capacity AC-1 / DC-1
Rated breaking capacity AC-1 / DC-1
Short-circuit protection device for couplers
without thermal overload relay - Motor protection excluded
Ue ≤ 1000 V AC - gG type fuse
100 A
Ue ≤ 1000 V AC - L type fuse
1 s 1150 A
Rated short-time withstand current Icw
10 s 680 A
at 40 °C ambient temperature,
30 s 310 A
in free air from a cold state
1 min 230 A
15 min 120 A
Impedance per pole
1.80 mΩ
AC-1 300 cycles/h
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
5 millions cycles
Maximum switching frequency
1200 cycles/h

5

200 A
2250 A
1200 A
680 A
450 A
250 A
1.20 mΩ

315 A
3800 A
1920 A
1040 A
730 A
390 A
0.60 mΩ

A
A
A
mm²

500 A
6000 A
2960 A
1480 A
1100 A
600 A
0.40 mΩ

Note: - Technical data applicable for N.O. main poles. For N.C. main poles, please consult us.
- These characteristics are suitable for LOR..AMA and LOR..AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

56

1SXU10607C0201 | R contactor US catalog

A
A
A
mm²

700 A
8400 A
4400 A
2200 A
1680 A
840 A
0.35 mΩ

LORR800 ... LORR5100 couplers
Technical data
Main pole - Utilization characteristics according to IEC
AC operated
Couplers types
Standards
Rated operational voltage Ue max.
Rated frequency (without de-rating)
Number of poles
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open couplers, θ ≤ 40 °C
With conductor cross-sectional area
AC-1 / DC-1 Utilization category
For air temperature close to couplers
θ ≤ 40 °C
Ie / Rated operational current AC-1 / DC-1
θ ≤ 55 °C
Ue max. ≤ 690 V, 50/60 Hz

LORR800 LORR1400 LORR1700 LORR2100 LORR2500 LORR3200 LORR3800 LORR4500 LORR5100
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
1000 V
25…60 Hz (for > 60…400 Hz please consult us)
1…4
1100 A
800 mm²

1400 A
1700 A
2100 A
2500 A
3200 A
3800 A
4500 A
5100 A
1000 mm² 1500 mm² 1500 mm² 2000 mm² 3000 mm² 3000 mm² 4000 mm² 4000 mm²

1100 A
1400 A
1700 A
2100 A
1000 A
1230 A
1500 A
1840 A
θ ≤ 70 °C 900 A
1030 A
1250 A
1540 A
800 mm² 1000 mm² 1500 mm² 1500 mm²
1000 V max. 1.5 x Ie / AC-1 or DC-1 acc. to IEC 60947-4-1
24 V max. 1.5 x Ie / AC-1 or DC-1 acc. to IEC 60947-4-1

With conductor cross-sectional area
Rated making capacity AC-1 / DC-1
Rated breaking capacity AC-1 / DC-1
Short-circuit protection device for couplers
without thermal overload relay - Motor protection excluded
Ue ≤ 1000 V AC - Circuit breaker
1250 A
1600 A
1 s 9000 A
11000 A
Rated short-time withstand current Icw
10 s 8000 A
at 40 °C ambient temperature,
9000 A
30 s 4000 A
5000 A
in free air from a cold state
1 min 3000 A
3700 A
15 min 1600 A
2000 A
Impedance per pole
0.18 mΩ 0.10 mΩ
AC-1 300 cycles/h 150 cycles/h
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
5 millions cycles
Maximum switching frequency
1200 cycles/h

2500
2200
1830
2000

A
A
A
mm²

3200
2800
2350
3000

A
A
A
mm²

3800
3330
2780
3000

A
A
A
mm²

4500
3950
3300
4000

A
A
A
mm²

5100
4470
3740
4000

A
A
A
mm²

5
2000 A
2500 A
13000 A 15000 A
11000 A 12200 A
6000 A
7000 A
4400 A
5000 A
2400 A
2800 A
0.090 mΩ 0.080 mΩ
120 cycles/h

20000 A 21000 A
15000 A 18000 A
8000 A
10000 A
6000 A
7000 A
3000 A
4000 A
0.05 mΩ 0.045 mΩ
60 cycles/h

24000 A 28000 A
19000 A 21000 A
11000 A 12000 A
7500 A
8000 A
4500 A
5000 A
0.04 mΩ 0.03 mΩ
40 cycles/h

2 millions cycles
600 cycles/h

1 million cycles
300 cycles/h

29000 A
22000 A
13000 A
8500 A
5500 A
0.027 mΩ

Note: - Technical data applicable for N.O. main poles. For N.C. main poles, please consult us.
- These characteristics are suitable for LOR..AME contactor versions (except for mechanical durability = 0.2 millions of operating cycles).

R contactor US catalog | 1SXU106047C0201

57

Notes

58

1SXU10607C0201 | R contactor US catalog

Slip-ring motor control
With rheostats
Application
Three kinds of contactors are used to control three-phase slip-ring motors: the stator contactor, the acceleration contactor(s),
and the rotor short-circuit contactor.
Example of a three-stroke starter (star (Y) connection diagram)
Stator
contactor

Rotor short-circuit
contactor

Acceleration
contactor

R2

R1

M
3

5

The starting resistances should be star (Y) or V connected acc. to the following wiring diagrams. Contactors have to be selected accordingly.

V
Stator contactor
The standard R contactor selection is based on the motor rated current acc. to the AC-2 utilization category, as well as on the
rated operational voltage and the on-load factor.
Acceleration contactor and rotor short-circuit contactor
FOR contactor selection is based on the contactor rated operational current Ie acc. to the AC-1 utilization category.
At the time of slip-ring motor starting and as soon as the motor nominal speed is reached, these contactors are used for the
short-circuiting of the rotor current limitation starting resistances (e.g. vapor-liquid rheostats).
These contactors are derived from the standard R contactors and are available in 2, 3, 4 or 6-pole versions acc. to the applicable connection diagram required (Y, V).
They can control rotor currents up to 3800 A and rotor voltages up to 4200 V (with increased insulation) acc. to the
IEC 60947-4-1 standard requirements. For rotor voltages ≥ 4200 V, please consult us.
Although the breaking of the rotor circuit is normally carried out in "off-load" conditions, the contactors are equipped with blowout devices and can occasionally break "on-load".
Ordering details, dimensions : please consult us.
The LOR couplers may be used for applications where equipment is breaking in "Off-load" conditions only.

R contactor US catalog | 1SXU106047C0201

59

Slip-ring motor control
With variable frequency drive

Application
This variant is used to start a slip-ring motor which will be then controlled by a variable frequency drive.
(1) Stator contactor

(4) Rotor inverter contactor

5
M
3
(2) Starter coupling contactor

(3) Rotor short-circuit contactor

Rheostat

Description
A liquid rheostat is used to start and accelerate the motor after closing of the starter coupling contactor (2) and then the stator
contactor (1). When the nominal speed is reached, the rotor short-circuit contactor (3) closes.
Then the rotor inverter contactor closes (4) and the starter coupling contactor (2) opens.
The speed of the motor is controlled by the variable frequency drive.
FOR contactors are suitable for starter coupling (2), rotor short-circuiting (3) and rotor inverter (4) contactor.
IOR contactors must be used for stator contactor (1).

60

1SXU10607C0201 | R contactor US catalog

FORR1000 … FORR3800 contactors
Rotor voltages up to 1500 V AC
Main pole - Utilization characteristics according to IEC (Y and V connection diagram)
AC operated
Contactor types
Rated rotor operational voltage Uer
Rated frequency (without de-rating)
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, θ ≤ 40 °C
With conductor cross-sectional area
Rated rotor operational current Ier
For air temperature close to contactor
θ ≤ 40 °C
θ ≤ 55 °C
θ ≤ 70 °C

With conductor cross-sectional area
Maximum making capacity
Maximum breaking capacity at
cos φ = 0.80 and 1000 V
Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Max. switching frequency

1s
10 s
30 s
1 min
15 min

FORR1000
FORR1400
FORR1700
1500 V
0.1...60 Hz (for > 60 Hz consult us)

FORR2100

FORR2500

FORR3200

FORR3800

1000 A
600 mm²

1400 A
1000 mm²

1700 A
1500 mm²

2100 A
2000 mm²

2500 A
2000 mm²

3200 A
3000 mm²

3800 A
3000 mm²

1000 A
930 A
800 A
600 mm²
14000 A

1400 A
1180 A
1000 A
1000 mm²
19000 A

1700 A
1450 A
1250 A
1500 mm²
21000 A

2100 A
1750 A
1500 A
2000 mm²
24000 A

2500 A
2200 A
1830 A
2000 mm²
24000 A

3200 A
2800 A
2350 A
3000 mm²
26000 A

3800 A
3200 A
2780 A
3000 mm²
29000 A

1500 A
9000 A
8000 A
4000 A
3000 A
1600 A
0.18 mΩ
120 cycles/h

2100 A
11000 A
9000 A
5000 A
3700 A
2000 A
0.10 mΩ

2600 A
13000 A
11000 A
6000 A
4400 A
2400 A
0.09 mΩ

3200 A
15000 A
12200 A
7000 A
5000 A
2800 A
0.08 mΩ

3800 A
20000 A
15000 A
8000 A
6000 A
3000 A
0.05 mΩ

4800 A
21000 A
18000 A
10000 A
7000 A
4000 A
0.045 mΩ

5700 A
24000 A
19000 A
11000 A
7500 A
4500 A
0.04 mΩ

5 millions
cycles
600 cycles/h

2 millions cycles

5

Note: Altitude ≥ 2000 m, dimension drawings: please consult us.

- Consult us for order codes.

R contactor US catalog | 1SXU106047C0201

61

FORR1000S … FORR2100S contactors
Rotor voltages up to 2500 V AC
Main pole - Utilization characteristics according to IEC (Y and V connection diagram)
AC operated
Contactor types
Rated rotor operational voltage Uer
Rated frequency (without de-rating)
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, θ ≤ 40 °C
With conductor cross-sectional area
Rated rotor operational current Ier
For air temperature close to contactor
θ ≤ 40 °C
θ ≤ 55 °C
θ ≤ 70 °C

With conductor cross-sectional area
Maximum making capacity
Maximum breaking capacity at
cos φ = 0.80 and 1000 V
Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

5

Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Max. switching frequency

1s
10 s
30 s
1 min
15 min

FORR1000S FORR1400S FORR1700S FORR2100S FORR2500S FORR3200S FORR3800S
2500 V
0.1...60 Hz (for > 60 Hz consult us)
1000 A
600 mm²

1400 A
1000 mm²

1700 A
1500 mm²

2100 A
2000 mm²

2500 A
2000 mm²

3200 A
3000 mm²

3800 A
3000 mm²

1000 A
930 A
800 A
600 mm²
14000 A

1400 A
1180 A
1000 A
1000 mm²
19000 A

1700 A
1450 A
1250 A
1500 mm²
21000 A

2100 A
1750 A
1500 A
2000 mm²
24000 A

2500 A
2200 A
1830 A
2000 mm²
24000 A

3200 A
2800 A
2350 A
3000 mm²
26000 A

3800 A
3200 A
2780 A
3000 mm²
29000 A

1500 A
9000 A
8000 A
4000 A
3000 A
1600 A
0.18 mΩ
120 cycles/h

2100 A
11000 A
9000 A
5000 A
3700 A
2000 A
0.10 mΩ

2600 A
13000 A
11000 A
6000 A
4400 A
2400 A
0.09 mΩ

3200 A
15000 A
12200 A
7000 A
5000 A
2800 A
0.08 mΩ

3800 A
20000 A
15000 A
8000 A
6000 A
3000 A
0.05 mΩ

4800 A
21000 A
18000 A
10000 A
7000 A
4000 A
0.045 mΩ

5700 A
24000 A
19000 A
11000 A
7500 A
4500 A
0.04 mΩ

5 millions
cycles
600 cycles/h

2 millions cycles

Note: Altitude ≥ 2000 m, dimension drawings: please consult us.

- Consult us for order codes.

62

1SXU10607C0201 | R contactor US catalog

FORR1000NSP … FORR2100NSP contactors
Rotor voltages up to 3500 V AC
Main pole - Utilization characteristics according to IEC (Y and V connection diagram)
AC operated
Contactor types
Rated rotor operational voltage Uer
Rated frequency (without de-rating)
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, θ ≤ 40 °C
With conductor cross-sectional area
Rated rotor operational current Ier
For air temperature close to contactor
θ ≤ 40 °C
θ ≤ 55 °C
θ ≤ 70 °C

With conductor cross-sectional area
Maximum making capacity
Maximum breaking capacity at
cos φ = 0.80 and 1000 V
Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Max. switching frequency

1s
10 s
30 s
1 min
15 min

FORR1000NSP FORR1400NSP FORR1700NSP FORR2100NSP FORR2500NSP FORR3200NSP FORR3800NSP
3500 V
0.1...60 Hz (for > 60 Hz consult us)
1000 A
600 mm²

1400 A
1000 mm²

1700 A
1500 mm²

2100 A
2000 mm²

2500 A
2000 mm²

3200 A
3000 mm²

3800 A
3000 mm²

1000 A
930 A
800 A
600 mm²
14000 A

1400 A
1180 A
1000 A
1000 mm²
19000 A

1700 A
1450 A
1250 A
1500 mm²
21000 A

2100 A
1750 A
1500 A
2000 mm²
24000 A

2500 A
2200 A
1830 A
2000 mm²
24000 A

3200 A
2800 A
2350 A
3000 mm²
26000 A

3800 A
3200 A
2780 A
3000 mm²
29000 A

1500 A
9000 A
8000 A
4000 A
3000 A
1600 A
0.18 mΩ
120 cycles/h

2100 A
11000 A
9000 A
5000 A
3700 A
2000 A
0.10 mΩ

2600 A
13000 A
11000 A
6000 A
4400 A
2400 A
0.09 mΩ

3200 A
15000 A
12200 A
7000 A
5000 A
2800 A
0.08 mΩ

3800 A
20000 A
15000 A
8000 A
6000 A
3000 A
0.05 mΩ

4800 A
21000 A
18000 A
10000 A
7000 A
4000 A
0.045 mΩ

5700 A
24000 A
19000 A
11000 A
7500 A
4500 A
0.04 mΩ

5 millions
cycles
600 cycles/h

2 millions cycles

5

Note: Altitude ≥ 2000 m, dimension drawings: please consult us.

- Consult us for order codes.

R contactor US catalog | 1SXU106047C0201

63

FORR1000SPE … FORR2100SPE contactors
Rotor voltages up to 4200 V AC
Main pole - Utilization characteristics according to IEC (Y only connection diagram)
AC operated
Contactor types
Rated rotor operational voltage Uer
Rated frequency (without de-rating)
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, θ ≤ 40 °C
With conductor cross-sectional area
Rated rotor operational current Ier
For air temperature close to contactor
θ ≤ 40 °C
θ ≤ 55 °C
θ ≤ 70 °C

With conductor cross-sectional area
Maximum making capacity
Maximum breaking capacity at
cos φ = 0.80 and 1000 V
Rated short-time withstand current Icw
at 40 °C ambient temperature,
in free air from a cold state

5

Impedance per pole
Maximum electrical switching frequency
Mechanical durability
Number of operating cycles
Max. switching frequency

1s
10 s
30 s
1 min
15 min

FORR1000SPE FORR1400SPE FORR1700SPE FORR2100SPE FORR2500SPE FORR3200SPE FORR3800SPE
4200 V
0.1...60 Hz (for > 60 Hz consult us)
1000 A
600 mm²

1400 A
1000 mm²

1700 A
1500 mm²

2100 A
2000 mm²

2500 A
2000 mm²

3200 A
3000 mm²

3800 A
3000 mm²

1000 A
930 A
800 A
600 mm²
14000 A

1400 A
1180 A
1000 A
1000 mm²
19000 A

1700 A
1450 A
1250 A
1500 mm²
21000 A

2100 A
1750 A
1500 A
2000 mm²
24000 A

2500 A
2200 A
1830 A
2000 mm²
24000 A

3200 A
2800 A
2350 A
3000 mm²
26000 A

3800 A
3200 A
2780 A
3000 mm²
29000 A

1500 A
9000 A
8000 A
4000 A
3000 A
1600 A
0.18 mΩ
120 cycles/h

2100 A
11000 A
9000 A
5000 A
3700 A
2000 A
0.10 mΩ

2600 A
13000 A
11000 A
6000 A
4400 A
2400 A
0.09 mΩ

3200 A
15000 A
12200 A
7000 A
5000 A
2800 A
0.08 mΩ

3800 A
20000 A
15000 A
8000 A
6000 A
3000 A
0.05 mΩ

4800 A
21000 A
18000 A
10000 A
7000 A
4000 A
0.045 mΩ

5700 A
24000 A
19000 A
11000 A
7500 A
4500 A
0.04 mΩ

5 millions
cycles
600 cycles/h

2 millions cycles

Note: - Uer > 4200 V AC, please consult us.
- Altitude ≥ 2000 m, dimension drawings: please consult us.
- Consult us for order codes.

64

1SXU10607C0201 | R contactor US catalog

Closed transition star-delta starting of three-phase
asynchronous motors
R contactor selection
Application
R contactors can be used for closed transition star-delta starting of three-phase asynchronous motors up to 1300 kW.

Description
This starting method, mainly used for large motor powers, prevents the speed drop during the "star-delta" transition time and maintains the
resulting current peak at a relatively low value.
For this purpose the extra KM4 transition contactor closes ﬁrst before the KM2 star contactor opens. When the KM4 contactor closes, the motor
windings are automatically delta connected, via resistances, to compensate the lack of current during the transition time. Thus the motor speed
remains basically the same. The ﬁnal delta connection step is then achieved by the KM3 delta contactor closing which switches-off the coil supply
to the KM4 transition contactor. As in the basic star-delta starting mode, the closed transition star-delta starting mode is restricted to low resistive
torque machines.
It is advisable, especially for big masses of inertia, to observe that the connection is made in acc. to the clockwise or anticlockwise rotation
direction, as indicated in the block diagram shown below, in order to prevent damages due to torque throbs.

5

Equipment sizing
– KM1 main contactor and KM3 delta contactor: rating = 0.58 x In for both contactors
– KM2 star contactor: compared with a star contactor that would be used for a basic open transition star-delta starter the present KM2 star
contactor has to be over-rated as it is intended to break the star current (0.34 x In) and the transition current too.
– KM4 transition contactor: the rating is based on the calculation of the short permissible current duration (Icw).
The value of the current ﬂow is about 1.5 x In and the current ﬂow duration < 100 ms.
A block type contactor in the AF series can be selected for this step.
– Transition resistances: empiric value, generally as follows, R (Ω) = 0.4 x Ue
In
Watt dissipation values for the transition resistances:

Ue2
1200 x R
- for 30 cycles/h max. P (W) =
Ue 2
500 x R

- for 12 cycles/h max. P (W) =

Block Diagram

1

3

5

2

4

6

KM4

1

3

5

2

4

6

KM2 / (Y)

1

3

5

2

4

6

L1

L2

L3

1

3

5

2

4

6

KM1 / (L)

KM3 / ( )
1

3

5

2

4

6

R

W2

KM1: Line contactor
KM2: Star contactor
KM3: Delta contactor
KM4: Closed transition contactor
R: Transition resistances

W1

V2

V1

U2

U1

W2

W1

V2

V1

U2

U1

R contactor US catalog | 1SXU106047C0201

65

AM-CC-JOR and AMF-CC-JOR field discharge contactors
Power circuit up to 2250 V DC, R63 ... R4500

Application
Field discharge contactors (or field circuit breakers) are used to control the field winding of
synchronous machines or exciter machines. In case of disturbances, the contactors ensure
a definite disconnection from the supply source and the subsequent discharge of the energy
stored in the machine magnetic circuit via a discharge resistor.
Diagram
Supply

AMF-CC-JORE 800-21

Discharge resistor

5
Field discharge
contactor

Field winding

Description
These contactors are designed with:
– 2 or 3 N.O. main poles with blowout devices, suitable for 2250 V DC max. operational
voltage and circuit time constant L/R ≤ 15 ms
– 1 N.C. main pole, without blowout device, named "discharge pole" and set MAKE before
BREAK with regard to the N.O. main poles.
Electro-magnet
AM-CC-JOR and AMF-CC-JOR ﬁeld discharge contactors are equipped with a latching device:
– magnetic latch for R63 ... R200
– mechanical latch for R550 ... R4500.
AC or DC control circuit.
The AMF-CC-JOR type is equipped with 2 tripping coils (double de-latching control).
Auxiliary contacts
– AM-CC: 5 auxiliary contacts as standard (3 N.O. + 2 N.C.)
– AMF-CC: 4 auxiliary contacts as standard (2 N.O. + 2 N.C.)
– Up to 16 auxiliary contacts max. on request.

66

1SXU10607C0201 | R contactor US catalog

Autotransformer starters

General
An autotransformer starter allows to start a squirrel-cage
motor with a reduced starting current due to the reduced
voltage within the accelerating duration.
At the contrary of the star-delta wiring, this autotransformer
starting method needs three wires and three terminals on the
motor.
At the starting period, the motor is wired to the autotransformer taps: the "KM3" star contactor and the "KM2"
autotransformer contactor are closed, the motor is under
reduced voltage. Consequently, the torque is reduced as
the square of the applied voltage. The auto-transformers are
generally equipped of three taps at each phase in order to
adapt the starting parameters to the field requirements.
When the motor reaches 80...95% of its nominal speed,
the star contactor opens. Then, the "KM1" line contactor is
making and the autotransformer contactor is opening. This
starting process is done without any network interruption.

Electrical distribution

KM2

KM1

T1

Autotransformer

KM3

5

Selection table (Id starting current / In nominal current < 8 - Acceleration time < 20 s - 30 cycles / h max.)
Motor ratings
50/60 Hz
440 V
kW
500
560
630
710
800
900
1000

Contactors
KM1
Line
IOR..800
IOR..1400
IOR..1400
IOR..1400
IOR..1700
IOR..2100
IOR..2100

KM2
Autotransformer taps
90 %
80 %
IOR..800
IOR..500..MT
IOR..800
IOR..500..MT
IOR..800
IOR..800
IOR..1400
IOR..800
IOR..1400
IOR..800
IOR..1700
IOR..1400..MT
IOR..1700
IOR..1400..MT

70 %
IOR..400..MT
IOR..500..MT
IOR..500..MT
IOR..500..MT
IOR..800
IOR..800
IOR..800

60 %
IOR..400..MT
IOR..400..MT
IOR..400..MT
IOR..400..MT
IOR..500..MT
IOR..500..MT
IOR..500..MT

KM3
Autotransformer taps
90 %
80 %
IOR..200..MT
IOR..400..MT
IOR..200..MT
IOR..400..MT
IOR..200..MT
IOR..400..MT
IOR..200..MT
IOR..500..MT
IOR..400..MT
IOR..500..MT
IOR..400..MT
IOR..800
IOR..400..MT
IOR..800

R contactor US catalog | 1SXU106047C0201

60-70 %
IOR..500..MT
IOR..500..MT
IOR..800
IOR..800
IOR..800
IOR..1400
IOR..1400

67

6

68

1SXU10607C0201 | R contactor US catalog

Advanced applications

Technical data

70

6

R contactor US catalog | 1SXU106047C0201

69

R contactors
Technical data
Types

NORR63..MT
NORR63..CC

NORR125..MT
NORR125..CC

NORR200..MT
NORR200..CC

NORR400

NORR800..MT
NORR800..CC
NORR800

Magnet system characteristics
Coil operating limits
acc. to IEC 60947-4-1
AC control voltage 50/60 Hz
Rated control circuit voltage Uc
Coil consumption

At θ ≤ 55 °C 0.85…1.1 x Uc

Average pull-in value
Average holding value

Drop-out voltage
Operating time (average values for Uc)
For N.O. poles of the NORR
Between coil energization and N.C. contact opening
Between coil de-energization and N.C. contact closing
For N.C. poles of the NORR
Between coil energization and N.O. contact closing
Between coil de-energization and N.O. contact opening

6

Types

24…550 V AC
290 VA
25 VA
20...75 % of Uc

460 VA
45 VA

410 VA
45 VA

540 VA
65 VA

610 VA
55 VA

30 ms
20 ms

30 ms
20 ms

40 ms
20 ms

60 ms
50 ms

100 ms
55 ms

27 ms
23 ms

27 ms
23 ms

37 ms
23 ms

55 ms
28 ms

85 ms
60 ms

NORR63..MT
NORR63..CC

NORR125..MT
NORR125..CC

NORR200..MT
NORR200..CC

NORR400

NORR800..MT
NORR800..CC
NORR800

2 X M6

2 x M6

2 x M8

2 x M12

4 x M12

Mounting characteristics
Fixing by screws (not supplied)

Connecting characteristics
Main terminals
Connection capacity (min. ... max.)
Main conductors (poles)
Terminal plates width
Terminal screw (not supplied)
Drilling holes (without thread)
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid
Flexible without ferrule
Tightening torque
Coil terminals
Built-in auxiliary terminals
Screw terminals
Main terminals
Coil terminals
Built-in auxiliary terminals

70

Terminal plates for lugs or bars

16 mm
2 x M6
-

1 or 2 x
1 or 2 x

20 mm
2 x M6
-

1...2.5 mm²
1...2.5 mm²
1.5 Nm
1.5 Nm
Screws and bolts
M4 with cable clamps
M4 with cable clamps

1SXU10607C0201 | R contactor US catalog

25 mm
2 x M8
-

30 mm
1 x ø13 mm

48 mm
2 x ø13 mm

R contactors
Technical data
General technical data
Contactor types
Standards
Rated insulation voltage Ui
acc. to IEC 60947-4-1 and EN 60947-4-1
R63 ... R500
R800 ... R5100
Rated impulse withstand voltage Uimp.
Ambient air temperature close to contactor
Operation
Storage
Climatic withstand
Maximum operating altitude (without de-rating)

IOR, LOR, NOR contactors
IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1

1000 V AC or 1000 V DC (1500 V DC with increased insulation)
1000 V AC or 1500 V DC
8 kV
-20...+70 °C
-20...+80 °C
Standard version for industrial environment and atmospheres
2000 m

Mounting characteristics and condition for use
Contactor types
Mounting positions

IOR, LOR, NOR contactors
Position 1 (horizontal bar)

6

Mounting distances

Maximum angle of inclination, in any direction : ±22° 30'
See "Dimensions"

R contactor US catalog | 1SXU106047C0201

71

R contactors
Technical data
Types

IORR63..MT
IORR63..CC
LORR85

IORR125..MT
IORR125..CC
LORR170

IORR200..MT
IORR200..CC
LORR260

IORR400..MT
IORR400..CC
LORR400

IORR500..MT
IORR500..CC
LORR550

Magnet system characteristics
Coil operating limits
acc. to IEC 60947-4-1
AC control voltage 50/60 Hz
Rated control circuit voltage Uc
Coil consumption

At θ ≤ 55 °C 0.85…1.1 x Uc

Average pull-in value
Average holding value

Drop-out voltage
Operating time (average values for Uc)
Between coil energization and N.O. contact closing
Between coil de-energization and N.O. contact opening

Types

6

24…550 V AC
290 VA
25 VA
20...75 % of Uc

460 VA
45 VA

410 VA
45 VA

540 VA
65 VA

540 VA
65 VA

30 ms
20 ms

30 ms
20 ms

40 ms
20 ms

60 ms
50 ms

60 ms
50 ms

IORR63..MT
IORR63..CC
LORR85

IORR125..MT
IORR125..CC
LORR170

IORR200..MT
IORR200..CC
LORR260

IORR400..MT
IORR400..CC
LORR400

IORR500..MT
IORR500..CC
LORR550

2 x M6

2 x M6

2 x M8

2 x M12

2 x M12

Mounting characteristics
Fixing by screws (not supplied)

Connecting characteristics
Main terminals
Connection capacity (min. ... max.)
Main conductors (poles)
Terminal plates width
Terminal screw (not supplied)
Drilling holes (without thread)
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid
Flexible without ferrule
Tightening torque
Coil terminals
Built-in auxiliary terminals
Screw terminals
Main terminals
Coil terminals
Built-in auxiliary terminals

72

Terminal plates for lugs or bars

16 mm
M6 x 20
-

1 or 2 x
1 or 2 x

20 mm
M8 x 20
-

1...2.5 mm²
1...2.5 mm²
1.5 Nm
1.5 Nm
Screws and bolts
M4 with cable clamps
M4 with cable clamps

1SXU10607C0201 | R contactor US catalog

25 mm
M10 x 25
-

30 mm
1 x ø13 mm

30 mm
1 x ø13 mm

R contactors
Technical data
Types

IORR800
LORR800
IORR800..MT
IORR800..CC

IORR1000

IORR1000..CC
FORR1000

IORR1400
LORR1400
IORR1400..MT
IORR1400..CC
FORR1400

IORR1700
LORR1700
IORR1700..MT
IORR1700..CC
FORR1700

IORR2100
LORR2100
IORR2100..MT
IORR2100..CC
FORR2100

Magnet system characteristics
Coil operating limits
acc. to IEC 60947-4-1
AC control voltage 50/60 Hz
Rated control circuit voltage Uc
Coil consumption

At θ ≤ 55 °C 0.85…1.1 x Uc

Average pull-in value
Average holding value

24…550 V AC
610 VA

2
4
2
4

55 VA

and 3 poles: 610 VA 2...4 poles: 925 VA
poles: 925 VA
and 3 poles: 55 VA 2...4 poles: 130 VA
poles: 130 VA

Drop-out voltage
Operating time (average values for Uc)
Between coil energization and N.O. contact closing
Between coil de-energization and N.O. contact opening

20...75 % of Uc
100 ms
55 ms

100 ms
55 ms

100 ms
55 ms

90 ms
40 ms

90 ms
30 ms

Types

IORR800
LORR800
IORR800..MT
IORR800..CC

IORR1000

IORR1400
LORR1400
IORR1400..MT
IORR1400..CC
FORR1400

IORR1700
LORR1700
IORR1700..MT
IORR1700..CC
FORR1700

IORR2100
LORR2100
IORR2100..MT
IORR2100..CC
FORR2100

IORR1000..CC
FORR1000

6

Mounting characteristics
Fixing by screws (not supplied)

4 x M12

Connecting characteristics
Main terminals
Connection capacity (min. ... max.)
Main conductors (poles)
Terminal plates width
Drilling holes (without thread)
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid
Flexible without ferrule
Tightening torque
Coil terminals
Built-in auxiliary terminals
Screw terminals
Main terminals
Coil terminals
Built-in auxiliary terminals

Terminal plates for lugs or bars

48 mm
2 x ø13 mm

1 or 2 x
1 or 2 x

48 mm
2 x ø13 mm

60 mm
2 x ø13 mm

80 mm
4 x ø11 mm

100 mm
4 x ø11 mm

1...2.5 mm²
1...2.5 mm²
1.5 Nm
1.5 Nm
Screws and bolts
M4 with cable clamps
M4 with cable clamps

R contactor US catalog | 1SXU106047C0201

73

R contactors
Technical data
Types

IORR2500
LORR2500
IORR2500..MT
IORR2500..CC
FORR2500

IORR3200
LORR3200
IORR3200..MT
IORR3200..CC
FORR3200

IORR3800
LORR3800
IORR3800..MT
IORR3800..CC
FORR3800

IORR4500
LORR4500
IORR4500..MT
IORR4500..CC

IORR5100
LORR5100
IORR5100..MT
IORR5100..CC

1...3 poles:
925 VA
1...3 poles:
130 VA

1 and 2 poles:
925 VA
1 and 2 poles:
130 VA

1 and 2 poles:
925 VA
1 and 2 poles:
130 VA

1 pole:
925 VA
1 pole:
130 VA

IORR2500
LORR2500
IORR2500..MT
IORR2500..CC
FORR2500

IORR3200
LORR3200
IORR3200..MT
IORR3200..CC
FORR3200

IORR3800
LORR3800
IORR3800..MT
IORR3800..CC
FORR3800

IORR4500
LORR4500
IORR4500..MT
IORR4500..CC

IORR5100
LORR5100
IORR5100..MT
IORR5100..CC

4 x M12

4 or 6 x M12

Magnet system characteristics
Coil operating limits
acc. to IEC 60947-4-1
AC control voltage 50/60 Hz
Rated control circuit voltage Uc
Coil consumption

At θ ≤ 55 °C 0.85…1.1 x Uc
48…550 V AC
1...4 poles:
925 VA
Average holding value 1...4 poles:
130 VA
20...75 % of Uc
Average pull-in value

Drop-out voltage
Operating time (average values for Uc)
Between coil energization and N.O. contact closing
Between coil de-energization and N.O. contact opening

6

Types

-

Mounting characteristics
Fixing by screws (not supplied)

Connecting characteristics
Main terminals
Connection capacity (min. ... max.)
Main conductors (poles)
Terminal plates width
Drilling holes (without thread)
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid
Flexible without ferrule
Tightening torque
Coil terminals
Built-in auxiliary terminals
Screw terminals
Main terminals
Coil terminals
Built-in auxiliary terminals

74

Terminal plates for lugs or bars

150 mm
8 x ø9 mm

1 or 2 x
1 or 2 x

180 mm
8 x ø13 mm

1...2.5 mm²
1...2.5 mm²
1.5 Nm
1.5 Nm
Screws and bolts
M4 with cable clamps
M4 with cable clamps

1SXU10607C0201 | R contactor US catalog

220 mm
8 x ø13 mm

280 mm
12 x ø11 mm

340 mm
14 x ø13 mm

Notes

R contactor US catalog | 1SXU106047C0201

75

7

76

1SXU10607C0201 | R contactor US catalog

Accessories and spare parts

Auxiliary contacts
Auxiliary contact blocks CA12

78

Auxiliary contacts CA15

78

Technical data

79

Main poles
Contact sets

80

Arcing horns

80

Equipotential connections

81

Arc chutes

81

Control circuits
Surge suppressors

82

Rectifiers

82

Magnet circuits

82

7
Mechanical interlock units

83

Mounting feet - Shaft extensions

84

R contactor US catalog | 1SXU106047C0201

77

Auxiliary contacts

Auxiliary contact blocks type CA12
1SBC373832F0301

Description

CA12-1

CA12 auxiliary contact blocks 2 or 4-pole are mounted on a support bracket, above the electro-magnet.
The R contactors type R and RE can be equipped with:
– 1 or 2 x 2-pole blocks
– 1 x 2-pole block + 1 x 4-pole blocks.
The R contactors type RR can be equipped with 1 or 2 x 2-pole blocks.

Ordering details
For R contactors type
R, RE, RR
(RC excluded)

Auxiliary
contacts

Type

Order code

Pkg
qty

Weight
(1 pce)
kg

Auxiliary contact blocks
63 ... 550

1
2
2
3
4

1
0
2
1
0

Support bracket
63 … 260
315 … 550

7

CA12-1
CA12-2
CA12-11
CA12-12
CA12-22

FPTN410004R0001
FPTN410005R0001
FPTN410013R0001
FPTN410016R0001
FPTN410012R0001

1
1
1
1
1

0.050
0.050
0.090
0.090
0.090

Support bracket
Support bracket

FPTN410056R0001
FPTN410056R0002

1
1

0.060
0.060

1SBC104054F0014

Auxiliary contacts type CA15
Description
CA15 auxiliary contacts are mounted on a mounting kit, on the frame.

Ordering details
For R contactors type
R, RE, RR, RC

CA15-F

Auxiliary Type
contacts

Order code

Pkg
qty

Weight
(1 pce)
kg

1SBC104053F0014

Auxiliary contact with screw terminals
63 ... 5100

CA15-O

Auxiliary contact for railway
63 ... 5100

Mounting kit
63 … 170, 315 … 550,
auxiliary frame ≥ 800
200 … 260
Main frame ≥ 800

1 0
0 1

CA15-F
CA15-O

FPTN410008R0004
FPTN410007R0006

1
1

0.070
0.070

1 0
0 1

CA15-F
CA15-O

FPTN210382R0003
FPTN210382R0004

1
1

0.070
0.070

universal
mounting kit
Mounting kit
Mounting kit

FPTN410054R0016

1

On
request

FPTN410054R0017
FPTN410213R0006

1
1

Special auxiliary contact blocks
Please contact your local sales organization (order code of R contactor needed).

78

1SXU10607C0201 | R contactor US catalog

Auxiliary contact blocks
Technical data
CA auxiliary contact blocks
Types
Rated operational voltage Ue max.
Rated frequency (without de-rating)
Conventional free-air thermal current Ith
acc. to IEC 60947-4-1, open couplers, θ ≤ 40 °C
Ie / Rated operational current AC-15
acc. to IEC 60947-5-1
24-48 V 50/60 Hz
110-127 V 50/60 Hz
220-240 V 50/60 Hz
380-440 V 50/60 Hz
500-600 V 50/60 Hz

Making capacity acc. to IEC 60947-5-1
Breaking capacity acc. to IEC 60947-5-1
Ie / Rated operational current DC-13
acc. to IEC 60947-5-1

Short-circuit protection device gG type fuse

24 V DC
48 V DC
72 V DC
110-125 V DC
220-250 V DC

CA12
690 V
25...400 Hz

CA15

12 A

15 A

8A
8A
5A
3A
2A
10 x Ie / AC-15
10 x Ie / AC-15

10 A
10 A
6A
3.5 A
2.5 A

6A
2.8 A
1A
0.55 A
0.3 A
10 A

16 A

7

R contactor US catalog | 1SXU106047C0201

79

Main poles

1SBC388134F0302NB

Contacts sets for N.O. or N.C. main poles
Description
The contact sets include 1 ﬁxed contact, 1 moving contact, 1 arcing horn (according to table below) and
screws.
The quantities needed are deﬁned per ratings as follow:
– 1 set per pole for R63….R800, R1000, R1400, R1700, R2100
– 2 sets per pole for R1250, R1500, R2500, R3200, R3800
– 3 sets per pole for R2000, R4500, R5100
– 4 sets per pole for R3150
– 5 sets per pole for R4000.

Ordering details

7

For R contactors type

Order code

Pkg
qty

Weight
(1 pce)
kg

Contact set with arcing horn
IOR, NOR, JOR, FOR
63, 85
125, 170
200, 260
315, 400 (1), 420
400 (2), 500, 550, 630

FPTN410389R0001
FPTN410389R0002
FPTN410389R0003
FPTN410389R0004
FPTN410389R0005

1 set
1 set
1 set
1 set
1 set

0.050
0.150
0.250
0.400
0.480

Contact set without arcing horn
LOR
85
170
260
420
400, 550
IOR, NOR, JOR, FOR, LOR
800, 1000, 1250, 1500, 2000, 3150, 4000
1400, 2500
1700, 2100, 3200, 3800, 4500, 5100

FPTN410390R0001
FPTN410390R0002
FPTN410390R0003
FPTN410390R0004
FPTN410390R0005
FPTN410391R0001
FPTN410503R0001
FPTN410506R0001

1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 set

0.040
0.090
0.180
0.250
0.470
0.520
0.520
0.830

Weight
(1 pce)
kg
0.200
0.200
0.280

(1) For NOR and JOR types, NC poles
(2) For IOR, NOR and JOR types, NO poles

Arcing horns for N.O. or N.C. main poles
1SBC104033F0014

Ordering details

80

For R contactors type
IOR, NOR, JOR, FOR

Order code

Pkg
qty

800, 1000, 1250, 1500, 2000, 3150, 4000
1400, 2500
1700, 2100, 3200, 3800, 4500, 5100

FPTN410446R0001
FPTN410446R0001
FPTN410508R0001

1
1
1

1SXU10607C0201 | R contactor US catalog

Main poles

Equipotential connections
1SBC104032F0014

Description
Equipotential connections must be ordered separately for ratings ≥ 800 A.

Ordering details
For R contactors type
IOR, NOR, JOR and FOR

Type

Order code

Pkg
qty

800 ... 5100
800 ... 4000

NO poles
NC poles

FPTN410176R0006
FPTN410176R0007

1
1

Weight
(1 pce)
kg
0.500
0.530

Arc chutes
Description
De-ion arc chutes replace basic arc chutes except for 315 and 420 A ratings.

1SBC387943F0302

Ordering details
For R contactors type
IOR, NOR, JOR and FOR

Type

63, 85
125, 170
200, 260
315, 400 (1),420
400 (2), 500, 550
800, 1000, 1250, 1500, 2000, 3150, 4000
1400, 2500
1700, 2100, 3200, 3800, 4500, 5100

De-ion arc chute
De-ion arc chute
De-ion arc chute
Basic arc chute
De-ion arc chute
De-ion arc chute
De-ion arc chute
De-ion arc chute

Order code

FPTN401938R0002
FPTN401939R0002
FPTN401940R0002
FPTN401936R0002
FPTN401941R0002
FPTN410067R0002
FPTN410067R0002
FPTN410507R0001

Pkg
qty
1
1
1
1
1
1
1
1

Weight
(1 pce)
kg
0.470
0.930
1.360
1.300
3.600
2.570
2.570
3.150

7

(1) For NOR and JOR types, NC poles
(2) For IOR, NOR and JOR types, NO poles

Pressure springs, insulated supports, complete poles and
other spare parts
Please contact your local sales organization (order code for R contactor needed).

R contactor US catalog | 1SXU106047C0201

81

Control circuits

Surge suppressors for contactor coils
1SBC104030F0014

Ordering details
For R contactors type
IOR, NOR , JOR, LOR and FOR

Rated control circuit
Type
voltage
Uc
V
AC DC
●
24...60
– RV-R1/60
●
– RV-R1/133
60...133
●
110...250
– RV-R1/250
●
– RV-R1/440
250...440
●
– RV-R1/660
440...660

Order code

Pkg
qty

Weight
(1 pce)

FPTN410463R6001
FPTN410463R6002
FPTN410463R6003
FPTN410463R6004
FPTN410463R6005

1
1
1
1
1

kg
0.050
0.050
0.050
0.050
0.050

For R contactors type
IORR, NORR, JORR,
LORR and FORR

Rated control circuit
voltage
Uc

Order code

Pkg
qty

Weight
(1 pce)

63 ... 5100

< 440 V AC

TRE2614501

1

kg
0.050

≥ 440 V AC

TRE2720806

1

0.050

63 ... 5100

Rectiﬁers

1SBC104029F0014

Ordering details

7

Complete control circuit kit
Including:
– 1 coil
– 1 economy resistor
– 1 surge suppressor
– 1 rectiﬁer

For complete kit, please contact your local sales organization (order code of R contactor needed).

Magnet circuits
Ordering details
For R contactors type
IORR, NORR, JORR, LORR, and FORR
IORE, NORE, JORE, LORE, and FORE

Order code

Pkg
qty

63, 85
125, 170
200, 260
400 ... 630
≥ 800

FPTN410437R0001
FPTN410438R0001
FPTN410439R0001
FPTN410441R0001
FPTN410200R0006

1
1
1
1
1

For tripping electro-magnet circuit AME or AM(F)-CC > 800 A: use 63, 85 A electro-magnet circuit.
For IOR and IOR..AMA versions, please consult your local sales organization (order code of R contactor needed).

Coils, economy resistors and other speciﬁc parts
Please contact your local sales organization (order code of R contactor needed).

82

1SXU10607C0201 | R contactor US catalog

Weight
(1 pce)
kg
1.500
1.500
1.500
2.500
8.000

Mechanical interlock units

Description
The VM mechanical interlock units are designed for the interlocking of two R contactors of the same rating.
The mounting between 2 contactors of a same rating doesn't affect their ﬁxing centers or their overall
dimensions.

1SBC388162F0302

Ordering details

VM

For R contactors type
IOR, NOR , JOR, LOR and FOR

Rating

IOR..-CC, IOR..-MT, NOR..-CC,
NOR..-MT, LOR
IOR..-CC, IOR..-MT, NOR..400,
LOR
IOR…, LOR…800, NOR…800,
FOR…1000
IOR…-CC, IOR…-MT
IOR, LOR, FOR
IOR…-CC, IOR…-MT

Type

Order code

Pkg
qty

63
125
200
400 ... 500

Fixing
center
mm
220
260
320
520

VM21/24
VM25
VM27
VM15-SP

FPL7101403R0001
FPL7401404R0001
FPL8001401R0001
FPL8301401R0002

1
1
1
1

Weight
(1 pce)
kg
0.140
0.180
0.260
0.500

800 ... 1000

520

VM16

FPL8601401R0001

1

0.600

VM17/18

FPL8801401R0001

1

0.700

VM19

FPL9001401R0001

1

0.800

800 … 1000
640
1400, 1700, 2100 640
1400, 1700, 2100 680

Note: For special versions, please consult us:
- interlocking between contactors with N.O. + N.C. poles or with latching
- interlocking between 2 contactors of different ratings
- interlocking between 3 contactors.

7

R contactor US catalog | 1SXU106047C0201

83

Mounting feet - Shaft extensions

Mounting feet
Description
1SBC104030F0014

When the contactors are to be ﬁtted on a back plate the mounting feet provide an increased clearance
behind the contactor for easier cabling.
Two pieces are required for one contactor.

Ordering details
For R contactors

Drilling for bar ﬁxing Ø

63 ... 170
200, 260
400, 500, 550

mm
6.2
8.2
12.5

Fixing centres
for vertical wall
mounting
mm
85 / 100...110
85 / 100...110
110...120

Type

Order code

Pkg
qty

Weight
(2 pce)

4NMW1009
4NMW1039
4NMW1041

FPL7108201P0001
FPL7608201P0001
FPL8308201P0001

2
2
2

kg
0.060
0.060
0.320

Main dimensions mm
2 x ø 6.5

ø 8.5

ø 6.2*
ø 8.2*

ø 10.5*
ø 12.5*
85

7

100 ... 110

01041

20 x 6.5

110 ... 120

54

1SBC104029F0014

4NMW1009/1039

22 x 8.5

40
22

50

* 4 NMW 1040 : ø = 10.5
* 4 NMW 1041 : ø = 12.5

R0112D

* 4 NMW 1009 : ø = 6.2
* 4 NMW 1039 : ø = 8.2

R0111D

15

Shaft extensions
Description
For 3 or 4 pole reversing or changeover pairs built with two contactors of different ratings, vertically mounted
above one another. Fitting on the shaft of the contactor having the smaller frame size.

Ordering details
For R contactors

Type

Order code

Pkg
qty

63 ... 170

-

FPTN410111R0001

1

Weight
(1 pce)
kg
(1)

200 ... 420

-

FPTN410111R0002

1

(1)

400, 500, 550

-

FPTN410111R0003

1

(1)

(1) On request.

84

1SXU10607C0201 | R contactor US catalog

Notes

R contactor US catalog | 1SXU106047C0201

85

8

86

1SXU10607C0201 | R contactor US catalog

Terminal marking and wiring diagrams

Terminal marking and positioning
R63 ... R500

88

R800 ... R5100

89

Wiring diagrams
R contactors and couplers
Control by 2 impulse pushbuttons and hold-in contact

90

Control by switch

90

R magnetically latched contactors - Contactors and couplers
Control by 2 impulse pushbuttons

91

Control by switch

92

8

R contactor US catalog | 1SXU106047C0201

87

R contactors
Terminal marking and positioning
R63 ... R500 (the main poles in variable number)

Main poles
The L.H.S. main pole is marked 1-2,
the following poles are marked 3-4, 5-6, etc

CA12 auxiliary contact blocks

Coil

3 2 1

8
CAOVE contact
for electrical interlocking

CA15 auxiliary contact blocks

CA15-OR contact
for economy resistor insertion

Main poles
Coil
CAOVE contact
CARB contact
CA15-OR contact
CA12 auxiliary contacts
Block No 3

N.O. main poles are respectively marked 1-2, 3-4, 5-6, 7-8
For N.C. main poles the letter R precedes the figures
AC coil: the terminals are marked A1 and A2
DC coil: the terminals are marked A1 (-) and A2 (+)
N.C. contact, adjustable, intended for electrical interlocking. Terminal marking: 21-22
N.O. contact, intended for "hold-in" function. Terminal marking: 13-14
N.C. contact, factory wired. It is intended for insertion of economy resistor. Terminal marking: 15-16
1 NO + 1 NC
2 NO
2 NO + 2 NC
3 NO + 1 NC
4 NO
3 NO + 3 NC
4 NO + 2 NC

Block No 2

Block No 1

CA15 extra auxiliary contacts
CA15-F (N.O.)

or CA15-O (N.C.)

CARB contacts
for "hold-in" function

43

31

44

32

No "n"
..3

43

33

44

34

No 8
173

6 NO

71

83

73

83

73

83

73

84

72

84

74

84

74

84

74

63

51

63

53

63

53

63

51

63

51

63

53

63

53

64

52

64

54

64

54

64

52

64

52

64

54

64

54

43

31

43

31

43

33

43

31

43

31

43

31

43

33

44

32

44

32

44

34

44

32

44

32

44

32

44

34

No 7
163

No 6
153

No 5
143

No 4
133

No 3
123

No 2
113

No 1
103

..4

174

164

154

144

134

124

114

104

..1

171

161

151

141

131

121

111

101

..2

172

162

152

142

132

122

112

102

The CA15 auxiliary contacts are ﬁtted from the right on the contactor frame according to this marking.

88

5 NO + 1 NC

83

1SXU10607C0201 | R contactor US catalog

R contactors
Terminal marking and positioning
R800 ... R5100 (the main poles in variable number, can be distributed on both sides of the electro-magnet)

Main poles
The L.H.S. main pole is marked 1-2,
the following poles are marked 3-4, 5-6, etc
4

3 2 1

CA15 auxiliary contact blocks
mounted on auxiliary frame
Position of the CA15 starting from the right

8

CA15 auxiliary contact blocks
mounted on main frame

Coil

Main poles

N.O. main poles are respectively marked 1-2, 3-4, 5-6, 7-8
For N.C. main poles the letter R precedes the figures
Coil
AC coil: the terminals are marked A1 and A2
DC coil: the terminals are marked A1 (-) and A2 (+)
CA15 auxiliary contact No 1 CA15-O (N.C.) contact intended for electrical interlocking. Terminal marking: 21-22
No 2 CA15-F (N.O.) contact intended for "hold-in" function. Terminal marking: 13-14
No 3 CA15-OR (N.C.). This contact is factory wired. It is intended for insertion of economy resistor. Terminal marking: 15-16
No 11
No 10
No 9
No 8
No 7
No 6
No 5
CA15 extra auxiliary contacts No "n"
173
163
153
143
133
123
113
CA15-F (N.O.)
..3

or CA15-O (N.C.)

No 4
103

..4

174

164

154

144

134

124

114

104

..1

171

161

151

141

131

121

111

101

..2

172

162

152

142

132

122

112

102

The CA15 auxiliary contacts are ﬁtted from the right, ﬁrst on the auxiliary frame and next on the main frame of the contactor, according to this marking.

R contactor US catalog | 1SXU106047C0201

89

R contactors and couplers
Wiring diagrams
Control by 2 impulse pushbuttons and hold-in contact
AC operated

13

KM

I

0
14

16

Re

KM
15

A1

+

–

KM
A2

IORR, IORR-MT, IORR-CC, NORR-MT, NORR-CC, LORR

8

Control by switch
AC operated

I

16

Re

KM
15

A1

+

–

KM
A2

IORR, IORR-MT, IORR-CC, NORR-MT, NORR-CC, LORR
Note: remove the factory wired strap 14-16

90

1SXU10607C0201 | R contactor US catalog

R magnetically latched contactors
Contactors and couplers
Wiring diagrams
Control by 2 impulse pushbuttons
AC operated

AC operated

Control voltage Uc ≤ 110 V AC

Control voltage Uc > 110 V AC

63

53

KM
64

63

53

64

54

KM

0
54

0

I

I

Rad

A1

+

A2

–

KM
–

85

86

IORR-CC-AMA, IORR-MT-AMA, NORR-CC-AMA,
NORR-MT-AMA, LORR-AMA

A1

75

+

KM
76

A2

–

KM
–

85

75

KM
86

76

8

IORR-CC-AMA, IORR-MT-AMA, NORR-CC-AMA,
NORR-MT-AMA, LORR-AMA

R contactor US catalog | 1SXU106047C0201

91

R mechanically latched contactors
Contactors and couplers
Wiring diagrams
Control by switch
AC operated
9

1
1/L1

3/L2

5/L3

7/L4

4/T2

6/T3

8/T4

KM = Closing coil
KL = Tripping coil
KA1 = Contactor relay
KA2 = Timed contactor relay
Re = Economy resistor

KA1

I

2/T1

3

2
12

Supply between 9 and 10
Closing between 1 and 3
Tripping between 1 and 2

KM
11

A2

A2

KA2

A1

KA1

A1

A1
58

KA2

KL

A2

16

+

–

A2

15

KM
57

A1

KM

14

Re

KM
13

10

IORR-AME, IORR-MT-AME, IORR-CC-AME, NORR-CC-AME, NORR-MT-AME,
LORR-AME

8

92

1SXU10607C0201 | R contactor US catalog

Notes

R contactor US catalog | 1SXU106047C0201

93

9

94

1SXU10607C0201 | R contactor US catalog

Main dimensions

IORR and LORR types
R800 … R2100

96

R2500 … R5100

98

IORR..MT and IORR..CC types
R63 … R500

100

R800 … R2100

102

R2500 … R5100

104

IORR..AME and LORR..AME types
R800 … R2100

106

R2500 … R5100

108

IORR..MT-AMA … IOR..MT-AMA and
IORR..CC-AMA … IOR..CC-AMA types
R63 ... R200

110

IORR..MT-AME and IORR..CC-AME types
R400 ... R500

112

R800 … R2100

114

R2500 … R5100

116

9

NORR..MT and NORR..CC types
R63 … R200

118

LORR type
R85 … R550

120

R contactor US catalog | 1SXU106047C0201

95

IORR and LORR types
R800 … R2100
Main dimensions mm
50

F

IORR D

60

LORR D1
D2

LORR types poles
are not equipped
with arc chutes

LORR I = 0

200

IORR I

I1

180

200

IORR M

LORR M1

CA15

H

CA15

N

ø
A

B

D3

B

40

F

IORR Y

50

LORR Y1

Terminal plate details
48
11.5

25

60
11.5

17.5

25

100

80
17.5

20

40

25

20

2 x ø13

R800

4 x ø11

2 x ø13

R1400

Terminal plate thickness: top terminal plates = 10 mm, bottom terminal plates = 12 mm

96

25

4 x ø11

2 x ø13

R1000

30

25

12.5

25

12.5

25

12.5

9

50

15

11.5

15

25

30

48
11.5

1SXU10607C0201 | R contactor US catalog

R1700

R2100

IORR and LORR types
R800 … R2100
Contactor
types

Number Fixing
of poles holes

Fixing
dimensions
F

R800

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3

245
345
385
245
345
385
285
385
540
300
445
540
300
445
540

R1000

R1400

R1700

R2100

Fixing -

4 x ø13

4 x ø13

4 x ø13

4 x ø13

4 x ø13

Dimensions -

Dimensions
A
60
60
60
60
60
60
85
85
85
85
85
85
85
85
85

B
90
70
90
70
110
120
140
120
140
120

Clearing distances -

D
325
325
325
325
325
325
325
325
325
325
325
325
325
325
325

D1
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260

D2
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75

D3
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77

H
70
70
70
70
70
70
70
70
70
84
84
84
84
84
84

I
108
108
108
108
108
108
108
108
108
108
108
108
108
108
108

I1
98
98
98
98
98
98
98
98
98
112
112
112
112
112
112

M
158
158
158
158
158
158
228
228
228
258
258
258
258
258
258

M1
115
115
115
115
115
115
165
165
165
165
165
165
165
165
165

N
85
85
85
85
85
85
100
100
100
125
125
125
125
125
125

Y
345
345
345
345
345
345
400
400
400
425
425
425
425
425
425

Y1
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280

Connecting

9

R contactor US catalog | 1SXU106047C0201

97

IORR and LORR types
R2500 … R5100
Main dimensions mm
50

F

IORR D

60

LORR D1
D2

LORR types poles
are not equipped
with arc chutes

LORR I = 0

200

IORR I

I1

180

200

IORR M

LORR M1

CA15

H

CA15

N

ø
A

B

D3

B

40

F

IORR Y

50

LORR Y1

Fig 1 = right electro-magnet (see table in the following page)

50

F

60

200

M

9

180

CA15

CA15

N

ø
A

B

40

A1

F

Fig 2 = central electro-magnet (see table in the following page)

220

180
30

150
30

30

40

35

30

30

50

50

50

35

20

30

40

30

45

45

15

20

30

40

R2500

R3200

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

98

8 x ø13

8 x ø13

8 x ø9

1SXU10607C0201 | R contactor US catalog

R3800

IORR and LORR types
R2500 … R5100
Contactor
types

Number Fixing
of poles holes

Fixing
dimension
F

R2500

1
2
3
1
2
3
1
2
1
2
1

385
635
950
445
760
950
445
760
540
950
540

R3200

R3800
R4500
R5100
Fixing -

4 x ø13

4 x ø13

4 x ø13
4 x ø13
4 x ø13
Dimensions -

Dimensions
A
130
135
135
150
135
135
160
145
185
185
210

A1
135
135
135
145
180
-

Clearing distances -

B
220
-

D
325
325
325
325
325
325
325
325
325
325
325

D1
260
260
260
260
260
260
260
260
260
260
260

D2
85
85
85
99
99
99
99
99
99
99
99

D3
87
87
87
87
87
87
87
87
87
87
87

H
135
135
135
174
174
174
174
174
174
174
174

I
108
108
108
108
108
108
108
108
108
108
108

I1
161
161
161
202
202
202
202
202
202
202
202

40

N
152
152
152
215
215
215
215
215
215
215
215

Y
425
425
425
450
450
450
450
450
450
450
465

Y1
280
280
280
280
280
280
280
280
280
280
280

Fig
1
1
2
1
2
2
1
2
1
2
1

340
40

40

40

20

50

50

50

50

50

50

20

45

45

20

40

20

40

M1
245
245
245
245
245
245
245
245
245
245
245

Connecting

280
40

M
258
258
258
300
300
300
300
300
300
300
300

12 x ø13

R4500

14 x ø13

R5100

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

9

R contactor US catalog | 1SXU106047C0201

99

IORR..MT and IORR..CC types
R63 … R500
Main dimensions mm
Q

F

R

CH = Frame

CH

CH

S

W

D

M

CA12

K
I1

I

CA15

H

N

ø

E
A

B

22 22 22

B

O

C

F

V

Z

Terminal plate details

Lower
terminal plate

9

100

Upper
terminal plate

1SXU10607C0201 | R contactor US catalog

P

Y

IORR..MT and IORR..CC types
R63 … R500
Contactor Number Fixing
types
holes

Fixing
Dimensions
dimension
F

of poles
R63

R125

R200

R400

R500

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3

Fixing -

2 x ø7

2

2

2

2

205
245
285
x ø7 205
285
345
x ø9 245
345
385
x ø13 345
445
540
x ø13 345
445
540

Dimensions -

A
45
45
45
57
57
57
69
69
69
79
79
79
79
79
79

B
50
50
61
61
68
68
80
80
80
80

C
93
93
93
93
93
93
116
116
116
160
160
160
160
160
160

Clearing distances -

D
148
148
148
153
153
153
190
190
190
260
260
260
260
260
260

E
36
36
36
40
40
40
40
40
40
100
100
100
100
100
100

H
63
63
63
76
76
76
93
93
93
118
118
118
118
118
118

I
114
114
114
138
138
138
140
140
140
230
230
230
230
230
230

I1
101
101
101
130
130
130
123
123
123
195
195
195
195
195
195

K
M6 x 20
M6 x 20
M6 x 20
M8 x 20
M8 x 20
M8 x 20
M10 x 25
M10 x 25
M10 x 25
ø13
ø13
ø13
ø13
ø13
ø13

ℓ
16
16
16
20
20
20
25
25
25
30
30
30
30
30
30

M
164
164
164
188
188
188
190
190
190
253
253
253
253
253
253

N
83
83
83
96
96
96
116
116
116
150
150
150
150
150
150

O
12.5
12.5
12.5
12.5
12.5
12.5
9
9
9
15
15
15
15
15
15

P
10.5
10.5
10.5
10.5
10.5
10.5
10
10
10
14
14
14
14
14
14

Q
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

R
23
23
23
23
23
23
20
20
20
20
20
20
20
20
20

S
15
15
15
15
15
15
25
25
25
20
20
20
20
20
20

V
8
8
8
10
10
10
13
13
13
20
20
20
20
20
20

W
16
16
16
20
20
20
20
20
20
46
46
46
46
46
46

Y
178
178
178
183
183
183
220
220
220
290
290
290
290
290
290

Z
8
8
8
10
10
10
12
12
12
20
20
20
20
20
20

Connecting

9

R contactor US catalog | 1SXU106047C0201

101

IORR..MT and IORR..CC types
R800 … R2100
Main dimensions mm
50

F

60
D
D2

I1

200

200

I

M

180

CA15

H

CA15

N

ø
A

B

D3

B

40

F

Y

50

Terminal plate details
48
11.5

25

60
11.5

17.5

25

100

80
17.5

20

40

25

20

2 x ø13

R800

4 x ø11

2 x ø13

R1400

Terminal plate thickness: top terminal plates = 10 mm, bottom terminal plates = 12 mm

102

25

4 x ø11

2 x ø13

R1000

30

25

12.5

25

12.5

25

12.5

9

50

15

11.5

15

25

30

48
11.5

1SXU10607C0201 | R contactor US catalog

R1700

R2100

IORR..MT and IORR..CC types
R800 … R2100
Contactor
types

Number Fixing
of poles holes

R800

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3

R1000

R1400

R1700

R2100

Fixing -

4 x ø13

4 x ø13

4 x ø13

4 x ø13

4 x ø13

Dimensions -

Fixing
Dimensions
dimension
F
A
B
245
60
345
60
90
385
60
70
285
60
345
60
90
445
60
80
285
80
385
80
110
540
85
120
300
85
445
85
140
540
85
120
300
85
445
85
140
540
85
120
Clearing distances -

D
325
325
325
325
325
325
325
325
325
325
325
325
325
325
325

D2
76
76
76
76
76
76
76
76
76
89
89
89
89
89
89

D3
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77

H
70
70
70
70
70
70
70
70
70
84
84
84
84
84
84

I
108
108
108
108
108
108
108
108
108
108
108
108
108
108
108

I1
175
175
175
175
175
175
175
175
175
189
189
189
189
189
189

M
195
195
195
195
195
195
258
258
258
288
288
288
288
288
288

N
90
90
90
90
90
90
100
100
100
125
125
125
125
125
125

Y
375
375
375
375
375
375
425
425
425
450
450
450
450
450
450

Connecting

9

R contactor US catalog | 1SXU106047C0201

103

IORR..MT and IORR..CC types
R2500 … R5100
Main dimensions mm
50

F

60
D
D2

I1

200

200

I

M

180

CA15

H

CA15

N

ø
A

B

D3

B

40

F

Y

50

Fig 1 = right electro-magnet (see table in the following page)

50

F

60

200

M

9

180

CA15

CA15

N

ø
A

B

40

A1

F

Fig 2 = central electro-magnet (see table in the following page)
220

180
30

150
30

30

40

35

30

30

50

50

50

35

20

30

40

30

45

45

15

20

30

40

R2500

R3200

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

104

8 x ø13

8 x ø13

8 x ø9

1SXU10607C0201 | R contactor US catalog

R3800

IORR..MT and IORR..CC types
R2500 … R5100
Contactor
types

Number Fixing
of poles holes

R2500

1
2
3
1
2
3
1
2
1
2
1

R3200

R3800
R4500
R5100
Fixing -

4 x ø13

4 x ø13

4 x ø13
4 x ø13
4 x ø13

Fixing
Dimensions
dimension
F
A
A1
385
130
635
135
950
135
135
445
150
760
135
135
950
135
135
445
160
760
145
145
540
185
950
185
180
540
210
-

B
220
-

Clearing distances -

Connecting

Dimensions -

D
325
325
325
325
325
325
325
325
325
325
325

D2
85
85
85
99
99
99
99
99
99
99
99

D3
87
87
87
87
87
87
87
87
87
87
87

H
135
135
135
174
174
174
174
174
174
174
174

I
108
108
108
108
108
108
108
108
108
108
108

I1
238
238
238
279
279
279
279
279
279
279
279

280
40

40

N
152
152
152
215
215
215
215
215
215
215
215

Y
425
425
425
450
450
450
450
450
450
450
465

Fig
1
1
2
1
2
2
1
2
1
2
1

340
40

40

40

20

50

50

50

50

50

50

20

45

45

20

40

20

40

M
258
258
258
300
300
300
300
300
300
300
300

12 x ø13

R4500

14 x ø13

R5100

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

9

R contactor US catalog | 1SXU106047C0201

105

IORR..AME and LORR..AME types
R800 … R2100
Main dimensions mm
IORR D
50

F

60

LORR D1
D2

200

200

I

I1

210

180

LORR M1

IORR M

CA15

CA15

N

A

B

H

100

ø
B

40

F

50

D3
IORR Y
LORR Y1

Terminal plate details
48

11.5

11.5

25

60
11.5

17.5

25

100

80
17.5

40

25

20

2 x ø13

R800

4 x ø11

2 x ø13

R1400

Terminal plate thickness: top terminal plates = 10 mm, bottom terminal plates = 12 mm

106

50

25

4 x ø11

2 x ø13

R1000

30

25

12.5

25

12.5

12.5

25

15

9

20

15

25

30

48
11.5

1SXU10607C0201 | R contactor US catalog

R1700

R2100

IORR..AME and LORR..AME types
R800 … R2100
Contactor
types

Number Fixing
of poles holes

R800

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3

R1000

R1400

R1700

R2100

Fixing -

4 x ø13

4 x ø13

4 x ø13

4 x ø13

4 x ø13

Dimensions -

Fixing
Dimensions
dimension
F
A
B
345
60
445
60
90
540
60
70
345
60
445
60
90
540
60
70
385
80
540
80
110
635
85
120
385
85
540
85
140
635
85
120
385
85
540
85
140
635
85
120
Clearing distances -

D
325
325
325
325
325
325
325
325
325
325
325
325
325
325
325

D1
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260

D2
75
75
75
75
75
75
76
76
76
75
75
75
75
75
75

D3
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77

H
70
70
70
70
70
70
70
70
70
84
84
84
84
84
84

I
108
108
108
108
108
108
108
108
108
108
108
108
108
108
108

I1
98
98
98
98
98
98
98
98
98
112
112
112
112
112
112

M
245
245
245
245
245
245
258
258
258
288
288
288
288
288
288

M1
245
245
245
245
245
245
245
245
245
245
245
245
245
245
245

N
90
90
90
90
90
90
100
100
100
125
125
125
125
125
125

Y
345
345
345
345
345
345
400
400
400
425
425
425
425
425
425

Y1
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280

Connecting

9

R contactor US catalog | 1SXU106047C0201

107

IORR..AME and LORR..AME types
R2500 … R5100
Main dimensions mm
IORR D
50

F

60

LORR D1
D2

I

I1

210

180

LORR M1

IORR M

CA15

200

200

LORR types poles
are not equiped
with arc chutes

CA15

N

B

H

100

ø
A

B

40

F

50

D3
IORR Y
LORR Y1

Fig 1 = right electro-magnet (see table in the following page)

50

F

60

200

M

9

180

CA15

CA15

N

ø
A

B

40

A1

F

Fig 2 = central electro-magnet (see table in the following page)

220

180
30

150
30

30

40

35

30

30

50

50

50

35

20

30

40

30

45

45

15

20

30

40

R2500

R3200

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

108

8 x ø13

8 x ø13

8 x ø9

1SXU10607C0201 | R contactor US catalog

R3800

IORR..AME and LORR..AME types
R2500 … R5100
Contactor
types

Number Fixing
of poles holes

R2500

1
2
3
1
2
3
1
2
1
2
1

R3200

R3800
R4500
R5100
Fixing -

4 x ø13

4 x ø13

4 x ø13
4 x ø13
4 x ø13

Fixing
Dimensions
dimensions
F
A
A1
540
130
685
135
1050
135
135
540
150
885
135
135
1050
135
135
540
160
885
145
145
635
185
1050
185
180
635
210
-

Dimensions -

Clearing distances -

B
220
-

D
325
325
325
325
325
325
325
325
325
325
325

D1
260
260
260
260
260
260
260
260
260
260
260

D2
85
85
85
99
99
99
99
99
99
99
99

D3
87
87
87
87
87
87
87
87
87
87
87

H
135
135
135
174
174
174
174
174
174
174
174

I
108
108
108
108
108
108
108
108
108
108
108

I1
161
161
161
202
202
202
202
202
202
202
202

40

N
152
152
152
215
215
215
215
215
215
215
215

Y
425
425
425
450
450
450
450
450
450
450
465

Y1
280
280
280
280
280
280
280
280
280
280
280

Fig
1
1
2
1
2
2
1
2
1
2
1

340
40

40

40

20

50

50

50

50

50

50

20

45

45

20

40

20

40

M1
245
245
245
245
245
245
245
245
245
245
245

Connecting

280
40

M
258
258
258
300
300
300
300
300
300
300
300

12 x ø13

R4500

14 x ø13

R5100

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

9

R contactor US catalog | 1SXU106047C0201

109

IORR..MT-AMA … IOR..MT-AMA and
IORR..CC-AMA … IOR..CC-AMA types
R63 … R200
Main dimensions mm
Q

F

R

CH = Frame

CH

CH

S

W

D

M

CA12

K
I1

I

CA15

H

N

ø

E
A

B

B

O

22 22
F

C
P

V

Z

Terminal plate details

9

Lower
terminal plate

110

Upper
terminal plate

1SXU10607C0201 | R contactor US catalog

Y

IORR..MT-AMA … IOR..MT-AMA and
IORR..CC-AMA … IOR..CC-AMA types
R63 … R200
Contactor Number Fixing
types
of poles holes
R63
R125

R200

1
2
3
1
2
3
1
2
3

Fixing -

2 x ø7
2 x ø7

2 x ø9

Fixing
Dimensions
dimension
F
A
B
245
45
285
45
50
345
45
50
285
57
345
57
61
385
57
61
345
69
445
69
68
540
69
68

Dimensions -

C
93
93
93
93
93
93
116
116
116

Clearing distances -

D
148
148
148
153
153
153
190
190
190

E
36
36
36
40
40
40
40
40
40

H
63
63
63
76
76
76
93
93
93

I
114
114
114
138
138
138
140
140
140

I1
101
101
101
130
130
130
123
123
123

K
M6 x 20
M6 x 20
M6 x 20
M8 x 20
M8 x 20
M8 x 20
M10 x 25
M10 x 25
M10 x 25

ℓ
16
16
16
20
20
20
25
25
25

M
164
164
164
188
188
188
190
190
190

N
83
83
83
96
96
96
116
116
116

O
12.5
12.5
12.5
12.5
12.5
12.5
9
9
9

P
10.5
10.5
10.5
10.5
10.5
10.5
10
10
10

Q
53
53
53
53
53
53
53
53
53

R
23
23
23
23
23
23
20
20
20

S
15
15
15
15
15
15
25
25
25

V
8
8
8
10
10
10
13
13
13

W
16
16
16
20
20
20
20
20
20

Y
178
178
178
183
183
183
220
220
220

Z
8
8
8
10
10
10
12
12
12

Connecting

9

R contactor US catalog | 1SXU106047C0201

111

IORR..MT-AME and IORR..CC-AME types
R400 … R500
Main dimensions mm
Q

F

R

CH

CH
W

D

M

K
I1

CA 15

I

300

S

N

H

ø

B

22 22

B

O

F

C
P

V

Z

Terminal plate details

Lower
terminal plate

9

112

Upper
terminal plate

1SXU10607C0201 | R contactor US catalog

R0021D

E
A

Y

IORR..MT-AME and IORR..CC-AME types
R400 … R500
Contactor Number Fixing
types
of poles holes
R400

R500

1
2
3
1
2
3

Fixing -

Fixing
Dimensions
dimension
F
A
B
C
2 x ø13 445
79 160
540
79 80 160
635
79 80 160
2 x ø13 445
79 160
540
79 80 160
635
79 80 160

Dimensions -

Clearing distances -

D
260
260
260
260
260
260

E
100
100
100
100
100
100

H
118
118
118
118
118
118

I
230
230
230
230
230
230

I1
195
195
195
195
195
195

K
ø13
ø13
ø13
ø13
ø13
ø13

ℓ
30
30
30
30
30
30

M
313
313
313
313
313
313

N
150
150
150
150
150
150

O
15
15
15
15
15
15

P
14
14
14
14
14
14

Q
53
53
53
53
53
53

R
20
20
20
20
20
20

S
20
20
20
20
20
20

V
20
20
20
20
20
20

W
46
46
46
46
46
46

Y
335
335
335
335
335
335

Z
20
20
20
20
20
20

Connecting

9

R contactor US catalog | 1SXU106047C0201

113

IORR..MT-AME and IORR..CC-AME types
R800 … R2100
Main dimensions mm
D
50

F

60

D2

210
200

200

I

I1

M

180

CA15

N

ø
A

B

H

100

CA15

B

D3

40

F

50

Y

Terminal plate details
48
11.5

11.5

25

60
11.5

17.5

25

100

80
17.5

40

25

20

2 x ø13

R800

4 x ø11

2 x ø13

R1400

Terminal plate thickness: top terminal plates = 10 mm, bottom terminal plates = 12 mm

114

50

25

4 x ø11

2 x ø13

R1000

30

25

12.5

25

12.5

12.5

25

15

9

20

15

25

30

48
11.5

1SXU10607C0201 | R contactor US catalog

R1700

R2100

IORR..MT-AME and IORR..CC-AME types
R800 … R2100
Contactor
types

Number Fixing
of poles holes

R800

1
2
3
1
2
3
1
2
3
1
2
3
1
2
3

R1000

R1400

R1700

R2100

Fixing -

4 x ø13

4 x ø13

4 x ø13

4 x ø13

4 x ø13

Dimensions -

Fixing
Dimensions
dimension
F
A
B
345
60
445
60
90
540
60
70
345
60
445
60
90
540
60
80
385
80
540
80
100
635
85
120
385
85
540
85
140
635
85
120
385
85
540
85
140
635
85
120
Clearing distances -

D
325
325
325
325
325
325
325
325
325
325
325
325
325
325
325

D2
76
76
76
76
76
76
76
76
76
89
89
89
89
89
89

D3
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77

H
70
70
70
70
70
70
70
70
70
84
84
84
84
84
84

I
108
108
108
108
108
108
108
108
108
108
108
108
108
108
108

I1
175
175
175
175
175
175
175
175
175
189
189
189
189
189
189

M
245
245
245
245
245
245
258
258
258
288
288
288
288
288
288

N
90
90
90
90
90
90
100
100
100
125
125
125
125
125
125

Y
375
375
375
375
375
375
425
425
425
450
450
450
450
450
450

Connecting

9

R contactor US catalog | 1SXU106047C0201

115

IORR..MT-AME and IORR..CC-AME types
R2500 … R5100
Main dimensions mm
D
50

F

60

D2

210
200

200

I

I1

M

180

CA15

N

ø
A

B

H

100

CA15

B

D3

40

F

50

Y

Fig 1 = right electro-magnet (see table in the following page)

50

F

60

CA15

200

M

180

9

CA15

N

ø
A

B

40

A1

F

Fig 2 = central electro-magnet (see table in the following page)

220

180
30

150
30

30

40

35

30

30

50

50

50

35

20

30

40

30

45

45

15

20

30

40

R2500

R3200

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

116

8 x ø13

8 x ø13

8 x ø9

1SXU10607C0201 | R contactor US catalog

R3800

IORR..MT-AME and IORR..CC-AME types
R2500 … R5100
Contactor
types

Number Fixing
of poles holes

R2500

1
2
3
1
2
3
1
2
1
2
1

R3200

R3800
R4500
R5100
Fixing -

4 x ø13

4 x ø13

4 x ø13
4 x ø13
4 x ø13

Fixing
Dimensions
dimension
F
A
A1
540
130
685
135
1050
135
135
540
150
885
135
135
1050
135
540
160
885
145
145
635
185
1050
185
180
635
210
-

Dimensions -

Clearing distances -

B
220
220
-

D
325
325
325
325
325
325
325
325
325
325
325

B1
-

D2
85
85
85
99
99
99
99
99
99
99
99

D3
87
87
87
87
87
87
87
87
87
87
87

H
135
135
135
174
174
174
174
174
174
174
174

I
108
108
108
108
108
108
108
108
108
108
108

I1
238
238
238
279
279
279
279
279
279
279
279

M
258
258
258
300
300
300
300
300
300
300
300

N
152
152
152
215
215
215
215
215
215
215
215

Y
425
425
425
450
450
450
450
450
450
450
465

Fig
1
1
2
1
2
2
1
2
1
2
1

Connecting

9

280
40

40

340
40

40

40

20

50

50

50

50

50

50

20

45

45

20

40

20

40

12 x ø13

R4500

14 x ø13

R5100

Terminal plate thickness for R2500 ... R5100: top and bottom terminal plates = 10 mm

R contactor US catalog | 1SXU106047C0201

117

NORR..MT and NORR..CC types
R63 … R200
Main dimensions mm
Q

F

R

CH = Frame

CH

CH

S

W

D

M

CA12

K
I1

I

CA15

N.C. pole T

N.O. pole H

N

ø

E
A

B

22 22 22

B

O

C

F

V

Z

Terminal plate details

Lower
terminal plate

9

118

Upper
terminal plate

1SXU10607C0201 | R contactor US catalog

P

Y

NORR..MT and NORR..CC types
R63 … R200
Contactor Number ﬁxing
types
of poles holes

Fixing
Dimensions
dimension
F

R63

205
245
285
345
205
285
345
385
245
345
385
445

R125

R200

1
2
3
4
1
2
3
4
1
2
3
4

Fixing -

2 x ø7

2 x ø7

2 x ø9

Dimensions -

A
45
45
45
45
57
57
57
57
69
69
69
69

B
50
50
50
61
61
61
68
68
68

C
93
93
93
93
93
93
93
93
116
116
116
116

Clearing distances -

D
148
148
148
148
153
153
153
153
190
190
190
190

E
36
36
36
36
40
40
40
40
40
40
40
40

H
63
63
63
63
76
76
76
76
93
93
93
93

I
114
114
114
114
138
138
138
138
140
140
140
140

I1
101
101
101
101
130
130
130
130
123
123
123
123

K
M6 x 20
M6 x 20
M6 x 20
M6 x 20
M8 x 20
M8 x 20
M8 x 20
M8 x 20
M10 x 25
M10 x 25
M10 x 25
M10 x 25

ℓ
16
16
16
16
20
20
20
20
25
25
25
25

M
164
164
164
164
188
188
188
188
190
190
190
190

N
111
111
111
111
126
126
126
126
143
143
143
143

O
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
9
9
9
9

P
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10
10
10
10

Q
53
53
53
53
53
53
53
53
53
53
53
53

R
23
23
23
23
23
23
23
23
20
20
20
20

S
15
15
15
15
15
15
15
15
25
25
25
25

T
96
96
96
96
111
111
111
111
125
125
125
125

V
8
8
8
8
10
10
10
10
13
13
13
13

W
16
16
16
16
20
20
20
20
20
20
20
20

Y
178
178
178
178
183
183
183
183
220
220
220
220

Z
8
8
8
8
10
10
10
10
12
12
12
12

Connecting

9

R contactor US catalog | 1SXU106047C0201

119

LORR type
R85 … R550
Main dimensions mm
Q

F

R

CH = Frame

CH

CH
D

I1

M

S

A

B

O

B

K

C

F

V

Z

Terminal plate details

9

Lower
terminal plate

120

Upper
terminal plate

1SXU10607C0201 | R contactor US catalog

H

N

ø

E
P

Y

LORR type
R85 … R550
Contactor Number Fixing
types
of poles holes
R85

R170

R260

R400

R550

1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4

Fixing -

2

2

2

2

2

Fixing
Dimensions
dimension
F
A
B
x ø7 175
35 205
35 37
245
35 37
345
35 37
x ø7 175
41 245
41 46
285
41 46
345
41 46
x ø9 205
48 285
45 54.5
345
48 54.5
385
48 54.5
x ø13 345
62 385
62 68
445
62 68
540
62 68
x ø13 345
62 385
62 68
445
62 68
540
62 68

Dimensions -

C
93
93
93
93
93
93
93
93
116
116
116
116
160
160
160
160
160
160
160
160

Clearing distances -

D
110
110
110
110
110
110
110
110
130
130
130
130
178
178
178
178
178
178
178
178

E
36
36
36
36
40
40
40
40
40
40
40
40
100
100
100
100
100
100
100
100

H
63
63
63
63
76
76
76
76
93
93
93
93
118
118
118
118
118
118
118
118

I1
101
101
101
101
130
130
130
130
123
123
123
123
195
195
195
195
195
195
195
195

K
M6 x 20
M6 x 20
M6 x 20
M6 x 20
M8 x 20
M8 x 20
M8 x 20
M8 x 20
M10 x 25
M10 x 25
M10 x 25
M10 x 25
ø13
ø13
ø13
ø13
ø13
ø13
ø13
ø13

ℓ
16
16
16
16
20
20
20
20
25
25
25
25
30
30
30
30
30
30
30
30

M
150
150
150
150
150
150
150
150
167
167
167
167
142
142
142
142
142
142
142
142

N
83
83
83
83
96
96
96
96
116
116
116
116
150
150
150
150
150
150
150
150

O
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
9
9
9
9
15
15
15
15
15
15
15
15

P
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10
10
10
10
14
14
14
14
14
14
14
14

Q
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

R
23
23
23
23
23
23
23
23
20
20
20
20
20
20
20
20
20
20
20
20

S
15
15
15
15
15
15
15
15
25
25
25
25
20
20
20
20
20
20
20
20

V
8
8
8
8
10
10
10
10
13
13
13
13
20
20
20
20
20
20
20
20

Y
125
125
125
125
125
125
125
125
145
145
145
145
193
193
193
193
193
193
193
193

Z
8
8
8
8
10
10
10
10
12
12
12
12
20
20
20
20
20
20
20
20

Connecting

9

R contactor US catalog | 1SXU106047C0201

121

10

122

1SXU10607C0201 | R contactor US catalog

Terms and definition

Specifications, standards and certifying

124

Terms and technical definitions

125

Utilization categories

126

Climatic withstand of devices

128

10

R contactor US catalog | 1SXU106047C0201

123

Specifications, standards and certifying

Definitions
ABB low voltage devices are developed and manufactured according to the rules set out in IEC international publications and in EN European
speciﬁcations.
In most countries, low voltage apparatus is built according to such rules with checking being the responsibility of the manufacturer. The devices
are therefore not subject to any further obligation for approval. A test report from our laboratories can be remitted to our customers, on request,
for presentation to different qualiﬁed local organizations.

Prescriptions and standards
International speciﬁcations
The International Electrotechnical Commission, IEC, which is part of the International Standards Organization, ISO, publishes IEC publications
which act as a basis for the world market.
European speciﬁcations and national speciﬁcations
The European Committee for Electrotechnical Standardization (CENELEC), which groups together 18 European countries, publishes EN standards.
These European standards differ very little from IEC international standards and have similar numbering.
The same applies for national standards which use, without exception, the same numbering and reproduce the texts of these uniﬁed standards in
their entirety. Contradicting national standards are withdrawn.
European directives
The guarantee of the free movement of goods within the European Community means that any regulatory differences between member states
have been eliminated. The European directives set up common rules that are included in the legislation of each state while contradictory regulations are canceled.
Three directives are essential:
– Low voltage directive 2006/95/EC concerns electrical equipment from 0 to 1000 V AC and from 75 to 1500 V DC
– This speciﬁes that compliance with the requirements that it sets out is acquired if the equipment conforms to the standards harmonized on a
European level: EN 60947-1 and EN 60947-4-1 for contactors
– Machines directive 2006/42/EC for safety speciﬁcations of machines and equipment on complete machines. Machines bearing the ce mark
comply with these speciﬁcations
– Electromagnetic compatibility directive 2004/108/EC which concerns all devices able to create electromagnetic disturbance
– Standard EN 60947-4-1 does not set out any requirement concerning the level of emission or immunity of contactors which do not have any
active electronic components. Owing to this fact, compliance with standard EN 60947-4-1 meets the requirements for ce marking, with respect
to this directive.

10

CE Marking :
– must not be confused with a quality label
– is proof of conformity with the European Directives concerning the product
– is part of an administrative procedure and guarantees free movement of the product within the European Community.
International standards
IEC 60947-1

Low-voltage switchgear and controlgear – Part 1: General rules.

IEC 60947-4-1

Low-voltage switchgear and controlgear – Part 4: Contactors and motor starters.
Section 1: Electromechanical contactors and motor starters.

IEC 60947-5-1

Low-voltage switchgear and controlgear – Part 5: Control circuit devices and switching elements.
Section 1: Electromechanical control circuit devices.

European standards
EN 60947-1
EN 60947-4-1

Low-voltage switchgear and controlgear – Part 1: General rules.
Low-voltage switchgear and controlgear – Part 4: Contactors and motor starters.
Section 1: Electromechanical contactors and motor starters.

EN 60947-5-1

Low-voltage switchgear and controlgear – Part 5: Control circuit devices and switching elements.
Section 1: Electromechanical control circuit devices.

124

1SXU10607C0201 | R contactor US catalog

Terms and technical definitions

Terminology

Rated breaking or making capacity

Altitude

Root mean square value (R.M.S.) Of the current that the contactor is
able to break or make at a given voltage according to the conditions
speciﬁed by standards and for a given utilization category.

Characterizes the place of use. It is expressed in meters above sea
level.
Circuits
– Auxiliary circuit:
All the conductive parts of a contactor designed to be inserted in
a different circuit from the main circuit and the contactor control
circuits.
– Control circuit:
All the conductive parts of a contactor (other than the main circuit
and the auxiliary circuit) used to control the contactor's closing operation or opening operation or both.
– Main circuit:
All the conductive parts of a contactor designed to be inserted in the
circuit that it controls.
Rated operational current Ie
Current rated by the manufacturer. It is mainly based on the rated
operational voltage Ue, the rated frequency, the utilization category, the
rated duty and the type of protective enclosure, if necessary.
Conventional free air thermal current Ith

Ambient temperature
Air temperature close to the contactor.
Time
– Time constant :
Ratio of the inductance to the resistance (L/R = mh/Ω = ms).
– Short-time withstand current Icw:
Current that the contactor is able to withstand in closed position for
a short time interval and in speciﬁed conditions.
– Minimum switching time:
This is the minimum closing or opening order time necessary for the
contactor to reach complete closing or opening.
– Closing time:
Time interval between the beginning of the closing operation and the
instant the contacts touch on all the poles.
– Opening time:
Time interval between the speciﬁed starting instant of the opening
operation and the instant the arcing contacts separate on all the
poles.

Current that the contactor can withstand in free air for a duty time of
8 hours without the temperature rise of its various parts exceeding the
maximum values given by the standard.

Rated control voltage Uc

Electrical durability

Rated operational voltage Ue

Number of on-load operating cycles that the contactor is able to carry
out. It depends on the utilization category.

Voltage to which the contactor's utilization characteristics refer. In
three-phase it is the phase-to-phase voltage.

Mechanical durability

Rated insulation voltage Ui

Number of no-current operating cycles that a contactor is able to carry
out.

Reference voltage for dielectric tests and creepage distances.

Control voltage value for which the control circuit is sized.

10

Rated impulse withstand voltage Uimp
Switching frequency
Number of switching cycles per hour.

Peak value of an impulse voltage, having a speciﬁed form and polarity,
which does not cause breakdown in speciﬁc test conditions.

Coil operating limits

Shock withstand

Expressed in multiples of the nominal control circuit voltage Uc for the
upper and lower limits.

Requirement for vehicles, crane drives, installations on board ships and
plug-in equipment. The contactors must not change position and the
overload relays must not trip.

Mounting position
Comply with the manufacturer's instructions.

Resistance to vibrations
Requirements for vehicles, boats and other means of transport. For
the speciﬁed vibration amplitude and frequency values the device must
remain able to operate.

R contactor US catalog | 1SXU106047C0201

125

Utilization categories

Standards
IEC publications 60941-1, 60947-4-1 and 60947-5-1 should be referred to on an international level with respect to contactors.
A contactor's duty is characterised by the utilization category together
with the rated operational voltage and current indicated.
Utilization categories for contactors according to IEC 60947-4-1
Alternating current:
– AC-1 Non-inductive or slightly inductive loads, resistance furnaces
– AC-2 Slip-ring motors: starting, switching off
– AC-3 Cage motors: starting, switching off running motors
– AC-4 Cage motors: starting, plugging, inching
– AC-5a Discharge lamp switching
– AC-5b Incandescent lamp switching
– AC-6a Transformer switching
– AC-6b Capacitor bank switching
– AC-7a Slightly inductive loads for domestic devices and similar applications
– AC-7b Motors for domestic applications
– AC-8a Hermetic refrigeration compressor motor control with manual
resetting of overload releases
– AC-8b Hermetic refrigeration compressor motor control with automatic resetting of overload releases.
Direct current:
– DC-1 Non inductive or slightly inductive loads, resistance furnaces
– DC-3 Shunt motors: starting, plugging, inching, dynamic breaking of
DC motors
– DC-5 Series motors: starting, plugging, inching, dynamic breaking of
DC motors
– DC-6 Incandescent lamp switching.

10

126

1SXU10607C0201 | R contactor US catalog

Utilization categories for the auxiliary contacts according to
IEC 60947-5-1
Alternating current:
– AC-12 Control of
isolation
– AC-13 Control of
– AC-14 Control of
– AC-15 Control of

resistive loads and static loads with opto-coupler
static loads with transformer isolation
weak electromagnetic loads (≤ 72 VA)
electromagnetic loads (> 72 VA).

Direct current:
– DC-12 Control of resistive loads and static loads with opto-coupler
isolation
– DC-13 Control of DC electromagnets
– DC-14 Control of DC electromagnets having economy resistors.
In fact some applications, and the speciﬁc criteria characterizing the
various loads controlled by contactors, may modify the utilization characteristics of the contactors.
DC power circuit switching
Arc suppression is more difﬁcult in direct current than in alternating
current and this is all the more true the higher the circuit time constant
which is why it is necessary to connect several poles in series in order
to improve breaking conditions.
AC high current circuit switching
Possibility of increasing performances by connecting poles in parallel
(please consult us).
Inﬂuence of the length of the conductors used in the contactor
control circuit
According to the operational voltages and the coil consumption, take
line resistances and capacitances into consideration, for the length and
the cross-sectional of the conductors.

Utilization categories

Making and breaking conditions for utilization categories
Utilization category

Durability test conditions

Occasional operation

Making conditions
I/Ie

U/Ue

Breaking conditions

Making conditions

Breaking conditions

Cos. φ
or
L/R (ms)

I/Ie

U/Ue

Cos. φ
or
L/R (ms)

Ic/Ie

Ur/Ue

Cos. φ
or
L/R (ms)

Ic/Ie

Ur/Ue

Cos. φ
or
L/R (ms)

Contactors for AC circuit switching
AC-1
1
1
AC-2
2.5
1
AC-3
Ie ≤ 100 A 6
1
Ie > 100 A 6
1
AC-4
Ie ≤ 100 A 6
1
Ie > 100 A 6
1

0.95
0.65
0.35
0.35
0.35
0.35

1
2.5
1
1
6
6

1
1
0.17
0.17
1
1

0.95
0.65
0.35
0.35
0.35
0.35

1.5
4
10
10
12
12

1.05
1.05
1.05
1.05
1.05
1.05

0.8
0.65
0.45
0.35
0.45
0.35

1.5
4
8
8
10
10

1.05
1.05
1.05
1.05
1.05
1.05

0.8
0.65
0.45
0.35
0.45
0.35

Contactors for DC circuit switching
DC-1
1
1
DC-3
2.5
1
DC-5
2.5
1

1
2
7.5

1
2.5
2.5

1
1
1

1
2
7.5

1.5
4
4

1.05
1.05
1.05

1
2.5
15

1.5
4
4

1.05
1.05
1.05

1
2.5
15

1

1

0.4

6
10

1.1
1.1

0.7
0.3

6
10

1.1
1.1

0.7
0.3

Auxiliary contacts for AC circuit switching
AC-14
(≤ 72 VA) AC-15
(> 72 VA) 10
1
0.7
Auxiliary contacts for DC circuit switching
Utilization category
Standard operation
Making conditions
DC-13
DC-14

I/Ie
1
-

U/Ue
1
-

Occasional operation
Breaking conditions

T0.95
6 P (1)
-

I/Ie
1
-

U/Ue
1
-

Making conditions
T0.95
6 P (1)
-

I/Ie
1.1
10

U/Ue
1.1
1.1

Breaking conditions
T0.95
6 P (1)
15 ms

I/Ie
1.1
10

U/Ue
1.1
1.1

T0.95
6 P (1)
15 ms

(1) The value "6 x P" is the result of an empirical relation which is estimated to represent most DC magnetic loads up to the highest limit of P = 50 W (6 x P = 300 ms). It is accepted
that loads having drawn energy above 50 W are made up of weaker loads in parallel. As a consequence, the 300 ms value must form the highest limit whatever the value of the
power drawn.

Key:
U (I)
Ur
L/R
Ue (Ie)

= applied voltage (current)
= recovery voltage
= test circuit time constant
= rated operational voltage (current)

Ic

= making and breaking current expressed in DC or in AC like the
r.m.s. value of the symmetrical components
T0.95 = time required to reach 95 % of the current in steady-state conditions,
expressed in milliseconds

R contactor US catalog | 1SXU106047C0201

10

127

Climatic withstand of devices

General
The life time and dependability of devices are mainly inﬂuenced by a series of climatic factors which cause their corrosion.
In practice, besides climatic conditions, there are other factors which may damage equipment such as fungi, insects (termites), dust, work site dirt
and aggressive environment (salty or sulphurous atmosphere, etc.) which can often only be identiﬁed at the place of installation.
The entrance of dust, insects, dirt, etc. in devices may be prevented if the appropriate degree of protection according to IEC 60529 is chosen.
ABB contactors have been used for many years in the most varied countries, with hot and humid climates for example: Brazil, Indonesia, India etc.
Experience has shown that ABB devices can be used in most countries throughout the world.
The climate of the country in which the device is installed is not the determining choice factor.
Account must be taken of:
– the immediate environment of the devices (sheltered, ventilated, temperature)
– the aggressiveness of the immediate atmosphere at the place of installation
– the length and frequency of non operating periods.
In the case of frequent condensation (Ie the formation of steam caused by rapid changes in temperature), heating resistors must be installed in
cubicles (100 to 250 W per m3 of enclosure).
The table below gives the cases where heating is necessary.

Environment

Operating conditions

Climate

Internal heating of enclosure

no running water,
no condensation

Continuous or not

All climates

Without

with running water

Continuous
Frequent or long stops

Outside, sheltered

no running water,
no condensation

Continuous or not

All climates
Temperate
Tropical
Temperate

Without
Without
With
Without

Outside or by the seaside

with running water

Continuous
Frequent or long stops

Tropical
All climates
Temperate
Tropical

With
Without
Without
With

Inside premises

10
The standard R series contactors are suitable for industrial environment and tropical atmospheres.

128

1SXU10607C0201 | R contactor US catalog

Notes

R contactor US catalog | 1SXU106047C0201

129

Questionnaire
Specification for R contactors
Customer .................................................................................................................
Contact person ...................................................... Date ..............................
Tel. .......................................................... e-mail ..................................................

ABB .............................................................................................................................
Contact person ....................................................................................................
Tel. ...............................................................................................................................

Quantity ................... Requested delivery date .....................................
Project / Application ...........................................................................................................................................................................................................................................

Power circuit

Auxiliary contacts

AC switching
Application type
AC-1 (resistive load)
AC-3 (direct starting, switching off running motors)
No load breaking
Other ..............................................................................................
Number of poles: N.O. ..................... N.C. .....................
Rated operational current Ie .................. A
Max. making current ............................ A
Max. breaking current ......................... A
Rated operational voltage Ue ............... V ............... Hz

Number of N.O. auxiliary contacts
Number of N.C. auxiliary contacts

............
.............

or
DC switching
Application type
DC-1 (resistive load)
DC-3 (shunt motors)
DC-5 (series motors)
No load breaking
Other .......................................
L/R .............. ms
Number of poles: N.O. ..................... N.C. .....................
Rated operational current Ie .................. A
Making current ........................................ A
max. .......... A
Breaking current min. .......... A
Rated operational voltage Ue ............... V DC

11

Operating conditions
Switching frequency ............................................. cycles/h
Mech. durability required (millions of operating cycles) ..............
Remarks ..........................................................................................

Accessories

Control circuit (coil)
AC
Voltage ..................... V ............... Hz
Voltage ..................... V DC
DC
Options
Magnetic/Mechanical
latching option

.............................................................................................................................................................................................................................................

Please add any other useful documents for further information e.g. technical speciﬁcation, drawing, wiring diagram, etc.

Brand ................................................................
Type ..................................................................
Fixing dimension
F = ............... mm
Overall dimensions W = ............... mm
H = ............... mm
D = ............... mm

H

Replacement of an existing contactor

F

D

W

Please photocopy and forward. Questionnaire also available on the ABB Website:
www.abb.com/lowvoltage
Section: Our offering
Select: Control Products > Contactors > Bar mounted contactors
130

1SXU10607C0201 | R contactor US catalog

Questionnaire
Specification for R contactors
Other information / Application type

11

This document is used to define the contactor specification according to the complete information on the application

Please photocopy and forward. Questionnaire also available on the ABB Website:
www.abb.com/lowvoltage
Section: Our offering
Select: Control Products > Contactors > Bar mounted contactors
R contactor US catalog | 1SXU106047C0201

131

Index
Order code classiﬁcation
Order code

12

132

Type

Page

Order code

Type

Page

Order code

Type

Page

FPL6115215R2113

IORR1400-20

24

FPL6335310R2113

LORR2100-30

55

FPL6816225R2223

IORR4500-20-CC-AME

40

FPL6115225R2223

IORR1400-20-AME

26

FPL6335410R2113

LORR2100-40

55

FPL6825002R2113

IORR4500-30-MT

25

FPL6115315R2113

IORR1400-30

24

FPL6515215R2113

IORR3200-20

24

FPL6825215R2113

IORR4500-20-MT

25

FPL6115325R2223

IORR1400-30-AME

26

FPL6515225R2223

IORR3200-20-AME

26

FPL6825225R2123

IORR4500-20-MT-AME

27

FPL6115415R2113

IORR1400-40

24

FPL6515315R2113

IORR3200-30

24

FPL6835001R2113

LORR4500-30

55

FPL6115425R2223

IORR1400-40-AME

26

FPL6515325R2223

IORR3200-30-AME

26

FPL6835110R2113

LORR4500-10

55

FPL6116125R2223

IORR1400-10-CC-AME

40

FPL6516115R2113

IORR3200-10-CC

38

FPL6835210R2113

LORR4500-20

55

FPL6116195R2113

IORR1400-10-CC-U

39

FPL6516125R2223

IORR3200-10-CC-AME

40

FPL6915001R2113

IORR5100-20

24

FPL6116215R2113

IORR1400-20-CC

38

FPL6516215R2113

IORR3200-20-CC

38

FPL6915002R2113

IORR5100-30

24

FPL6116225R2223

IORR1400-20-CC-AME

40

FPL6516225R2223

IORR3200-20-CC-AME

40

FPL6916001R2113

IORR5100-30-CC

38

FPL6116315R2113

IORR1400-30-CC

38

FPL6516315R2113

IORR3200-30-CC

38

FPL6916002R2113

IORR5100-20-CC

38

FPL6116325R2223

IORR1400-30-CC-AME

40

FPL6516325R2223

IORR3200-30-CC-AME

40

FPL6916115R2113

IORR5100-10-CC

38

FPL6125215R2113

IORR1400-20-MT

25

FPL6525215R2113

IORR3200-20-MT

25

FPL6916125R2223

IORR5100-10-CC-AME

40

FPL6125225R2123

IORR1400-20-MT-AME

27

FPL6525225R2123

IORR3200-20-MT-AME

27

FPL6925001R2113

IORR5100-20-MT

25

FPL6125315R2113

IORR1400-30-MT

25

FPL6525315R2113

IORR3200-30-MT

25

FPL6925002R2113

IORR5100-30-MT

25

FPL6125325R2123

IORR1400-30-MT-AME

27

FPL6525325R2123

IORR3200-30-MT-AME

27

FPL6935001R2113

LORR5100-20

55

FPL6125415R2113

IORR1400-40-MT

25

FPL6535001R2113

LORR3200-40

55

FPL6935110R2113

LORR5100-10

55

FPL6135110R2113

LORR1400-10

55

FPL6535110R2113

LORR3200-10

55

FPL7101403R0001

VM21/24

83

FPL6135210R2113

LORR1400-20

55

FPL6535210R2113

LORR3200-20

55

FPL7108201P0001

4NMW1009

84

FPL6135310R2113

LORR1400-30

55

FPL6535310R2113

LORR3200-30

55

FPL7116116R2113

IORR63-10-CC

38

FPL6135410R2113

LORR1400-40

55

FPL6615001R2113

IORR3800-30

24

FPL7116136R2123

IORR63-10-CC-AMA

40

FPL6215215R2113

IORR1700-20

24

FPL6615215R2113

IORR3800-20

24

FPL7116216R2113

IORR63-20-CC

38

FPL6215225R2223

IORR1700-20-AME

26

FPL6615225R2223

IORR3800-20-AME

26

FPL7116236R2123

IORR63-20-CC-AMA

40

FPL6215315R2113

IORR1700-30

24

FPL6616001R2113

IORR3800-30-CC

38

FPL7125216R2113

IORR63-20-MT

25

FPL6215325R2223

IORR1700-30-AME

26

FPL6616115R2113

IORR3800-10-CC

38

FPL7125236R2123

IORR63-20-MT-AMA

27

FPL6215415R2113

IORR1700-40

24

FPL6616125R2223

IORR3800-10-CC-AME

40

FPL7125336R2123

IORR63-30-MT-AMA

27

FPL6215425R2223

IORR1700-40-AME

26

FPL6616195R2113

IORR1400-10-CC-U

38

FPL7125386R2113

IORR63-30-MT

25

FPL6216125R2223

IORR1700-10-CC-AME

40

FPL6616215R2113

IORR3800-20-CC

38

FPL7125416R2113

IORR63-40-MT

25

FPL6216195R2113

IORR1700-10-CC-U

38

FPL6616225R2223

IORR3800-20-CC-AME

40

FPL7125436R2123

IORR63-40-MT-AMA

27

FPL6216195R2113

IORR1700-10-CC-U

39

FPL6625001R2113

IORR3800-30-MT

25

FPL7146116R2113

NORR63-01-CC

50

FPL6216215R2113

IORR1700-20-CC

38

FPL6625215R2113

IORR3800-20-MT

25

FPL7146216R2113

NORR63-02-CC

50

FPL6216225R2223

IORR1700-20-CC-AME

40

FPL6625225R2123

IORR3800-20-MT-AME

27

FPL7146516R2113

NORR63-21-CC

50

FPL6216315R2113

IORR1700-30-CC

38

FPL6625325R2123

IORR3800-30-MT-AME

27

FPL7146716R2113

NORR63-31-CC

50

FPL6216325R2223

IORR1700-30-CC-AME

40

FPL6635002R2113

LORR3800-30

55

FPL7155216R2113

NORR63-02-MT

49

FPL6225215R2113

IORR1700-20-MT

25

FPL6635003R2113

LORR3800-40

55

FPL7155516R2113

NORR63-21-MT

49

FPL6225225R2123

IORR1700-20-MT-AME

27

FPL6635110R2113

LORR3800-10

55

FPL7155716R2113

NORR63-31-MT

49

FPL6225315R2113

IORR1700-30-MT

25

FPL6635210R2113

LORR3800-20

55

FPL7235110R2113

LORR85-10

55

FPL6225325R2123

IORR1700-30-MT-AME

27

FPL6715215R2113

IORR2500-20

24

FPL7235210R2113

LORR85-20

55

FPL6225415R2113

IORR1700-40-MT

25

FPL6715225R2223

IORR2500-20-AME

26

FPL7235310R2113

LORR85-30

55

FPL6235110R2113

LORR1700-10

55

FPL6715315R2113

IORR2500-30

24

FPL7235410R2113

LORR85-40

55

FPL6235210R2113

LORR1700-20

55

FPL6715325R2223

IORR2500-30-AME

26

FPL7401404R0001

VM25

83

FPL6235310R2113

LORR1700-30

55

FPL6716115R2113

IORR2500-10-CC

38

FPL7416115R2113

IORR125-10-CC

38

FPL6235410R2113

LORR1700-40

55

FPL6716125R2223

IORR2500-10-CC-AME

40

FPL7416135R2123

IORR125-10-CC-AMA

40

FPL6315215R2113

IORR2100-20

24

FPL6716215R2113

IORR2500-20-CC

38

FPL7416215R2113

IORR125-20-CC

38

FPL6315225R2223

IORR2100-20-AME

26

FPL6716225R2223

IORR2500-20-CC-AME

40

FPL7416235R2123

IORR125-20-CC-AMA

40

FPL6315315R2113

IORR2100-30

24

FPL6716315R2113

IORR2500-30-CC

38

FPL7425215R2113

IORR125-20-MT

25

FPL6315325R2223

IORR2100-30-AME

26

FPL6716325R2223

IORR2500-30-CC-AME

40

FPL7425235R2123

IORR125-20-MT-AMA

27

FPL6315415R2113

IORR2100-40

24

FPL6725215R2113

IORR2500-20-MT

25

FPL7425315R2113

IORR125-30-MT

25

FPL6315425R2223

IORR2100-40-AME

26

FPL6725225R2123

IORR2500-20-MT-AME

27

FPL7425335R2123

IORR125-30-MT-AMA

27

FPL6316125R2223

IORR2100-10-CC-AME

40

FPL6725315R2113

IORR2500-30-MT

25

FPL7425415R2113

IORR125-40-MT

25

FPL6316195R2113

IORR2100-10-CC-U

38

FPL6725325R2123

IORR2500-30-MT-AME

27

FPL7425435R2123

IORR125-40-MT-AMA

27

FPL6316195R2113

IORR2100-10-CC-U

39

FPL6725415R2113

IORR2500-40-MT

25

FPL7446115R2113

NORR125-01-CC

50

FPL6316215R2113

IORR2100-20-CC

38

FPL6735110R2113

LORR2500-10

55

FPL7446215R2113

NORR125-02-CC

50

FPL6316225R2223

IORR2100-20-CC-AME

40

FPL6735210R2113

LORR2500-20

55

FPL7446515R2113

NORR125-21-CC

50

FPL6316315R2113

IORR2100-30-CC

38

FPL6735310R2113

LORR2500-30

55

FPL7446715R2113

NORR125-31-CC

50

FPL6316325R2223

IORR2100-30-CC-AME

40

FPL6735410R2113

LORR2500-40

55

FPL7455215R2113

NORR125-02-MT

49

FPL6325215R2113

IORR2100-20-MT

25

FPL6815001R2113

IORR4500-30

24

FPL7455515R2113

NORR125-21-MT

49

FPL6325225R2123

IORR2100-20-MT-AME

27

FPL6815215R2113

IORR4500-20

24

FPL7455715R2113

NORR125-31-MT

49

FPL6325315R2113

IORR2100-30-MT

25

FPL6815225R2223

IORR4500-20-AME

26

FPL7535110R2113

LORR170-10

55

FPL6325325R2123

IORR2100-30-MT-AME

27

FPL6816001R2113

IORR4500-30-CC

38

FPL7535210R2113

LORR170-20

55

FPL6325415R2113

IORR2100-40-MT

25

FPL6816115R2113

IORR4500-10-CC

38

FPL7535310R2113

LORR170-30

55

FPL6335110R2113

LORR2100-10

55

FPL6816125R2223

IORR4500-10-CC-AME

40

FPL7535410R2113

LORR170-40

55

FPL6335210R2113

LORR2100-20

55

FPL6816215R2113

IORR4500-20-CC

38

FPL7608201P0001

4NMW1039

84

1SXU10607C0201 | R contactor US catalog

Index
Order code classiﬁcation
Order code

Type

Page

Order code

Type

Page

Order code

Type

Page

FPL7616115R2113

IORR200-10-CC

38

FPL8645715R2113

NORR800-31

49

FPTN410067R0002

ARC CHUTE

81

FPL7616135R2123

IORR200-10-CC-AMA

40

FPL8646115R2113

NORR800-01-CC

50

FPTN410111R0001

FPL7616215R2113

IORR200-20-CC

38

FPL8646215R2113

NORR800-02-CC

50

SHAFT EXTENSION
R63… R170

84

FPL7616235R2123

IORR200-20-CC-AMA

40

FPL8646515R2113

NORR800-21-CC

50

FPTN410111R0002

FPL7625215R2113

IORR200-20-MT

25

FPL8646715R2113

NORR800-31-CC

50

SHAFT EXTENSION
R200… R420

84

FPTN410111R0003

SHAFT EXTENSION
R400, 500 550

84

FPTN410176R0006

EQUIPOTENTIAL
CONNECTION

81

FPTN410176R0007

EQUIPOTENTIAL
CONNECTION

81

FPTN410200R0006

MAGNET SET FOR
MAIN COIL

82

MOUNTING KIT

77

FPL7625235R2123

IORR200-20-MT-AMA

27

FPL8655215R2113

NORR800-02-MT

49

FPL7625315R2113

IORR200-30-MT

25

FPL8655515R2113

NORR800-21-MT

49

FPL7625335R2123

IORR200-30-MT-AMA

27

FPL8655715R2113

NORR800-31-MT

49

FPL7625415R2113

IORR200-40-MT

25

FPL8715215R2113

IORR1000-20

24

FPL7625435R2123

IORR200-40-MT-AMA

27

FPL8715225R2223

IORR1000-20-AME

26

FPL7646115R2113

NORR200-01-CC

50

FPL8715315R2113

IORR1000-30

24

FPL7646215R2113

NORR200-02-CC

50

FPL8715325R2223

IORR1000-30-AME

26

FPL7646515R2113

NORR200-21-CC

50

FPL8715415R2113

IORR1000-40

24

FPTN410213R0006

FPL7646715R2113

NORR200-31-CC

50

FPL8715425R2223

IORR1000-40-AME

26

FPTN410389R0001

FPL7655215R2113

NORR200-02-MT

49

FPL8716125R2223

IORR1000-10-CC-AME

40

CONTACT SET
WITH ARCING HORN

80

FPTN410389R0002

CONTACT SET
WITH ARCING HORN

80

FPTN410389R0003

CONTACT SET
WITH ARCING HORN

80

FPTN410389R0004

CONTACT SET
WITH ARCING HORN

80

FPTN410389R0005

CONTACT SET
WITH ARCING HORN

80

FPTN410390R0001

CONTACT SET
WITH ARCING HORN

80

FPTN410390R0002

CONTACT SET
WITH ARCING HORN

80

FPTN410390R0003

CONTACT SET
WITH ARCING HORN

80

FPTN410390R0004

CONTACT SET
WITH ARCING HORN

80

FPTN410390R0005

CONTACT SET
WITH ARCING HORN

80

FPTN410391R0001

CONTACT SET
WITH ARCING HORN

80

FPTN410437R0001

MAGNET SET FOR
MAIN COIL

82

FPTN410438R0001

MAGNET SET FOR
MAIN COIL

82

FPTN410439R0001

MAGNET SET FOR
MAIN COIL

82

FPTN410441R0001

MAGNET SET FOR
MAIN COIL

82

FPTN410446R0001

ARCING HORN

80

FPTN410446R0001

ARCING HORN

80

FPTN410463R6001

RV-R1/60

82

FPTN410463R6002

RV-R1/133

82

FPL7655515R2113

NORR200-21-MT

49

FPL8716195R2113

IORR1000-10-CC-U

38

FPL7655715R2113

NORR200-31-MT

49

FPL8716195R2113

IORR1000-10-CC-U

39

FPL7835110R2113

LORR260-10

55

FPL8716215R2113

IORR1000-20-CC

38

FPL7835210R2113

LORR260-20

55

FPL8716225R2223

IORR1000-20-CC-AME

40

FPL7835310R2113

LORR260-30

55

FPL8716315R2113

IORR1000-30-CC

38

FPL7835410R2113

LORR260-40

55

FPL8716325R2223

IORR1000-30-CC-AME

40

FPL8001401R0001

VM27

83

FPL8801401R0001

VM17/18

83

FPL8301401R0002

VM15-SP

83

FPL9001401R0001

VM19

83

FPL8308201P0001

4NMW1041

84

FPL9416115R2113

IORR400-10-CC

38

FPL8316115R2113

IORR500-10-CC

38

FPL9416125R2223

IORR400-10-CC-AME

40

FPL8316125R2223

IORR500-10-CC-AME

40

FPL9416215R2113

IORR400-20-CC

38

FPL8316215R2113

IORR500-20-CC

38

FPL9416225R2223

IORR400-20-CC-AME

40

FPL8316225R2223

IORR500-20-CC-AME

40

FPL9416325R2223

IORR400-30-CC-AME

40

FPL8316325R2223

IORR500-30-CC-AME

40

FPL9425215R2113

IORR400-20-MT

25

FPL8325215R2113

IORR500-20-MT

25

FPL9425225R2123

IORR400-20-MT-AME

27

FPL8325225R2123

IORR500-20-MT-AME

27

FPL9425315R2113

IORR400-30-MT

25

FPL8325315R2113

IORR500-30-MT

25

FPL9425325R2123

IORR400-30-MT-AME

27

FPL8325325R2123

IORR500-30-MT-AME

27

FPL9425415R2113

IORR400-40-MT

25

FPL8325415R2113

IORR500-40-MT

25

FPL9435110R2113

LORR400-10

55

FPL8435110R2113

LORR550-10

55

FPL9435210R2113

LORR400-20

55

FPL8435210R2113

LORR550-20

55

FPL9435310R2113

LORR400-30

55

FPL8435310R2113

LORR550-30

55

FPL9435410R2113

LORR400-40

55

FPL8435410R2113

LORR550-40

55

FPL9445115R2113

NORR400-01

50

FPL8601401R0001

VM16

83

FPL9445215R2113

NORR400-02

49

FPL8615215R2113

IORR800-20

24

FPL9445215R2113

NORR400-02

50

FPL8615225R2223

IORR800-20-AME

26

FPL9445515R2113

NORR400-21

49

FPL8615315R2113

IORR800-30

24

FPL9445515R2113

NORR400-21

50

FPL8615325R2223

IORR800-30-AME

26

FPL9445715R2113

NORR400-31

49

FPL8615415R2113

IORR800-40

24

FPL9445715R2113

NORR400-31

50

FPL8615425R2223

IORR800-40-AME

26

FPTN210382R0003

CA15-F

77

FPTN410463R6003

RV-R1/250

82

FPL8616125R2223

IORR800-10-CC-AME

40

FPTN210382R0004

CA15-O

77

FPTN410463R6004

RV-R1/440

82

FPL8616195R2113

IORR800-10-CC-U

38

FPTN401936R0002

ARC CHUTE

81

FPTN410463R6005

RV-R1/660

82

FPTN410503R0001

CONTACT SET
WITH ARCING HORN

80

FPTN410506R0001

CONTACT SET
WITH ARCING HORN

80

FPTN410507R0001

ARC CHUTE

81

FPTN410508R0001

ARCING HORN

80

TRE2614501

RECTIFIER BRIDGE

82

TRE2720806

RECTIFIER BRIDGE

82

On request

IORR125-30-CC

38

On request

IORR125-30-CC-AMA

40

FPL8616195R2113

IORR800-10-CC-U

39

FPTN401938R0002

ARC CHUTE

81

FPL8616215R2113

IORR800-20-CC

38

FPTN401939R0002

ARC CHUTE

81

FPL8616225R2223

IORR800-20-CC-AME

40

FPTN401940R0002

ARC CHUTE

81

FPL8616315R2113

IORR800-30-CC

38

FPTN401941R0002

ARC CHUTE

81

FPL8616325R2223

IORR800-30-CC-AME

40

FPTN410004R0001

CA12-1

77

FPL8625215R2113

IORR800-20-MT

25

FPTN410005R0001

CA12-2

77

FPL8625225R2123

IORR800-20-MT-AME

27

FPTN410007R0006

CA15-O

77

FPL8625315R2113

IORR800-30-MT

25

FPTN410008R0004

CA15-F

77

FPL8625325R2123

IORR800-30-MT-AME

27

FPTN410012R0001

CA12-22

77

FPL8625415R2113

IORR800-40-MT

25

FPTN410013R0001

CA12-11

77

FPL8635110R2113

LORR800-10

55

FPTN410016R0001

CA12-12

77

On request

IORR200-30-CC

38

FPL8635210R2113

LORR800-20

55

FPTN410054R0016

UNIVERSAL MOUNTING KIT

77

On request

IORR200-30-CC-AMA

40

FPL8635310R2113

LORR800-30

55

FPTN410054R0017

MOUNTING KIT

77

On request

IORR400-30-CC

38

FPL8635410R2113

LORR800-40

55

FPTN410056R0001

CA12-1 SUPPORT BRACKET 77

On request

IORR500-30-CC

38

FPL8645215R2113

NORR800-02

49

FPTN410056R0002

CA12 SUPPORT BRACKET

77

On request

IORR63-30-CC

38

FPL8645515R2113

NORR800-21

49

FPTN410067R0002

ARC CHUTE

81

On request

IORR63-30-CC-AMA

40

R contactor US catalog | 1SXU106047C0201

12

133

Index
Type classiﬁcation
Type

Order code

4NMW1009

FPL7108201P0001

4NMW1039

FPL7608201P0001

Order code

Page

Type

Order code

Page

84

IORR1000-40-AME

FPL8715425R2223

26

IORR2100-20

FPL6315215R2113

24

84

IORR125-10-CC

FPL7416115R2113

38

IORR2100-20-AME

FPL6315225R2223

26

FPL8308201P0001

84

IORR125-10-CC-AMA

FPL7416135R2123

40

IORR2100-20-CC

FPL6316215R2113

38

ARC CHUTE

FPTN401938R0002

81

IORR125-20-CC

FPL7416215R2113

38

IORR2100-20-CC-AME

FPL6316225R2223

40

ARC CHUTE

FPTN401939R0002

81

IORR125-20-CC-AMA

FPL7416235R2123

40

IORR2100-20-MT

FPL6325215R2113

25

ARC CHUTE

FPTN401940R0002

81

IORR125-20-MT

FPL7425215R2113

25

IORR2100-20-MT-AME

FPL6325225R2123

27

ARC CHUTE

FPTN401936R0002

81

IORR125-20-MT-AMA

FPL7425235R2123

27

IORR2100-30

FPL6315315R2113

24

ARC CHUTE

FPTN401941R0002

81

IORR125-30-CC

On request

38

IORR2100-30-AME

FPL6315325R2223

26

ARC CHUTE

FPTN410067R0002

81

IORR125-30-CC-AMA

On request

40

IORR2100-30-CC

FPL6316315R2113

38

ARC CHUTE

FPTN410067R0002

81

IORR125-30-MT

FPL7425315R2113

25

IORR2100-30-CC-AME

FPL6316325R2223

40

ARC CHUTE

FPTN410507R0001

81

IORR125-30-MT-AMA

FPL7425335R2123

27

IORR2100-30-MT

FPL6325315R2113

25

ARCING HORN

FPTN410446R0001

80

IORR125-40-MT

FPL7425415R2113

25

IORR2100-30-MT-AME

FPL6325325R2123

27

ARCING HORN

FPTN410446R0001

80

IORR125-40-MT-AMA

FPL7425435R2123

27

IORR2100-40

FPL6315415R2113

24

ARCING HORN

FPTN410508R0001

80

IORR1400-10-CC-AME

FPL6116125R2223

40

IORR2100-40-AME

FPL6315425R2223

26

CA12 SUPPORT
BRACKET

IORR1400-10-CC-U

FPL6616195R2113

38

IORR2100-40-MT

FPL6325415R2113

25

FPTN410056R0002

77

IORR1400-10-CC-U

FPL6116195R2113

39

IORR2500-10-CC

FPL6716115R2113

38

CA12-1

FPTN410004R0001

77

IORR1400-20

FPL6115215R2113

24

IORR2500-10-CC-AME

FPL6716125R2223

40

CA12-1 SUPPORT
BRACKET

FPTN410056R0001

77

IORR1400-20-AME

FPL6115225R2223

26

IORR2500-20

FPL6715215R2113

24

CA12-11

FPTN410013R0001

77

IORR1400-20-CC

FPL6116215R2113

38

IORR2500-20-AME

FPL6715225R2223

26

CA12-12

FPTN410016R0001

77

IORR1400-20-CC-AME

FPL6116225R2223

40

IORR2500-20-CC

FPL6716215R2113

38

CA12-2

FPTN410005R0001

77

IORR1400-20-MT

FPL6125215R2113

25

IORR2500-20-CC-AME

FPL6716225R2223

40

CA12-22

FPTN410012R0001

77

IORR1400-20-MT-AME

FPL6125225R2123

27

IORR2500-20-MT

FPL6725215R2113

25

CA15-F

FPTN410008R0004

77

IORR1400-30

FPL6115315R2113

24

IORR2500-20-MT-AME

FPL6725225R2123

27

CA15-F

FPTN210382R0003

77

IORR1400-30-AME

FPL6115325R2223

26

IORR2500-30

FPL6715315R2113

24

CA15-O

FPTN410007R0006

77

IORR1400-30-CC

FPL6116315R2113

38

IORR2500-30-AME

FPL6715325R2223

26

CA15-O

FPTN210382R0004

77

IORR1400-30-CC-AME

FPL6116325R2223

40

IORR2500-30-CC

FPL6716315R2113

38

CONTACT SET WITH
ARCING HORN

IORR1400-30-MT

FPL6125315R2113

25

IORR2500-30-CC-AME

FPL6716325R2223

40

FPTN410389R0001

80

IORR1400-30-MT-AME

FPL6125325R2123

27

IORR2500-30-MT

FPL6725315R2113

25

IORR1400-40

FPL6115415R2113

24

IORR2500-30-MT-AME

FPL6725325R2123

27

IORR1400-40-AME

FPL6115425R2223

26

IORR2500-40-MT

FPL6725415R2113

25

IORR1400-40-MT

FPL6125415R2113

25

IORR3200-10-CC

FPL6516115R2113

38

IORR1700-10-CC-AME

FPL6216125R2223

40

IORR3200-10-CC-AME

FPL6516125R2223

40

IORR1700-10-CC-U

FPL6216195R2113

38

IORR3200-20

FPL6515215R2113

24

IORR1700-10-CC-U

FPL6216195R2113

39

IORR3200-20-AME

FPL6515225R2223

26

FPTN410389R0002

80

CONTACT SET WITH
ARCING HORN

FPTN410389R0003

80

CONTACT SET WITH
ARCING HORN

FPTN410389R0004

80

CONTACT SET WITH
ARCING HORN
CONTACT SET WITH
ARCING HORN
CONTACT SET WITH
ARCING HORN

FPTN410389R0005
FPTN410390R0001
FPTN410390R0002

80
80
80

CONTACT SET WITH
ARCING HORN

FPTN410390R0003

80

CONTACT SET WITH
ARCING HORN

FPTN410390R0004

80

CONTACT SET WITH
ARCING HORN

FPTN410390R0005

80

CONTACT SET WITH
ARCING HORN

FPTN410391R0001

80

CONTACT SET WITH
ARCING HORN

134

Type

4NMW1041

CONTACT SET WITH
ARCING HORN

12

Page

FPTN410503R0001

80

IORR1700-20

FPL6215215R2113

24

IORR3200-20-CC

FPL6516215R2113

38

IORR1700-20-AME

FPL6215225R2223

26

IORR3200-20-CC-AME

FPL6516225R2223

40

IORR1700-20-CC

FPL6216215R2113

38

IORR3200-20-MT

FPL6525215R2113

25

IORR1700-20-CC-AME

FPL6216225R2223

40

IORR3200-20-MT-AME

FPL6525225R2123

27

IORR1700-20-MT

FPL6225215R2113

25

IORR3200-30

FPL6515315R2113

24

IORR1700-20-MT-AME

FPL6225225R2123

27

IORR3200-30-AME

FPL6515325R2223

26

IORR1700-30

FPL6215315R2113

24

IORR3200-30-CC

FPL6516315R2113

38

IORR1700-30-AME

FPL6215325R2223

26

IORR3200-30-CC-AME

FPL6516325R2223

40

IORR1700-30-CC

FPL6216315R2113

38

IORR3200-30-MT

FPL6525315R2113

25

IORR1700-30-CC-AME

FPL6216325R2223

40

IORR3200-30-MT-AME

FPL6525325R2123

27

IORR1700-30-MT

FPL6225315R2113

25

IORR3800-10-CC

FPL6616115R2113

38

IORR1700-30-MT-AME

FPL6225325R2123

27

IORR3800-10-CC-AME

FPL6616125R2223

40

IORR1700-40

FPL6215415R2113

24

IORR3800-20

FPL6615215R2113

24

IORR1700-40-AME

FPL6215425R2223

26

IORR3800-20-AME

FPL6615225R2223

26

IORR1700-40-MT

FPL6225415R2113

25

IORR3800-20-CC

FPL6616215R2113

38

IORR200-10-CC

FPL7616115R2113

38

IORR3800-20-CC-AME

FPL6616225R2223

40

IORR200-10-CC-AMA

FPL7616135R2123

40

IORR3800-20-MT

FPL6625215R2113

25

IORR200-20-CC

FPL7616215R2113

38

IORR3800-20-MT-AME

FPL6625225R2123

27

40

IORR200-20-CC-AMA

FPL7616235R2123

40

IORR3800-30

FPL6615001R2113

24

FPL8716195R2113

38

IORR200-20-MT

FPL7625215R2113

25

IORR3800-30-CC

FPL6616001R2113

38

IORR1000-10-CC-U

FPL8716195R2113

39

IORR200-20-MT-AMA

FPL7625235R2123

27

IORR3800-30-MT

FPL6625001R2113

25

IORR1000-20

FPL8715215R2113

24

IORR200-30-CC

On request

38

IORR3800-30-MT-AME

FPL6625325R2123

27

IORR1000-20-AME

FPL8715225R2223

26

IORR200-30-CC-AMA

On request

40

IORR400-10-CC

FPL9416115R2113

38

IORR1000-20-CC

FPL8716215R2113

38

IORR200-30-MT

FPL7625315R2113

25

IORR400-10-CC-AME

FPL9416125R2223

40

IORR1000-20-CC-AME

FPL8716225R2223

40

IORR200-30-MT-AMA

FPL7625335R2123

27

IORR400-20-CC

FPL9416215R2113

38

IORR1000-30

FPL8715315R2113

24

IORR200-40-MT

FPL7625415R2113

25

IORR400-20-CC-AME

FPL9416225R2223

40

IORR1000-30-AME

FPL8715325R2223

26

IORR200-40-MT-AMA

FPL7625435R2123

27

IORR400-20-MT

FPL9425215R2113

25

IORR1000-30-CC

FPL8716315R2113

38

IORR2100-10-CC-AME

FPL6316125R2223

40

IORR400-20-MT-AME

FPL9425225R2123

27

IORR1000-30-CC-AME

FPL8716325R2223

40

IORR2100-10-CC-U

FPL6316195R2113

38

IORR400-30-CC

On request

38

IORR1000-40

FPL8715415R2113

24

IORR2100-10-CC-U

FPL6316195R2113

39

IORR400-30-CC-AME

FPL9416325R2223

40

CONTACT SET WITH
ARCING HORN

FPTN410506R0001

80

EQUIPOTENTIAL
CONNECTION

FPTN410176R0006

81

EQUIPOTENTIAL
CONNECTION

FPTN410176R0007

81

IORR1000-10-CC-AME

FPL8716125R2223

IORR1000-10-CC-U

1SXU10607C0201 | R contactor US catalog

Index
Type classiﬁcation
Type

Order code

Page

Type

Order code

Page

Type

Order code

Page

IORR400-30-MT

FPL9425315R2113

25

LORR1400-20

FPL6135210R2113

55

NORR125-02-CC

FPL7446215R2113

50

IORR400-30-MT-AME

FPL9425325R2123

27

LORR1400-30

FPL6135310R2113

55

NORR125-02-MT

FPL7455215R2113

49

IORR400-40-MT

FPL9425415R2113

25

LORR1400-40

FPL6135410R2113

55

NORR125-21-CC

FPL7446515R2113

50

IORR4500-10-CC

FPL6816115R2113

38

LORR1700-10

FPL6235110R2113

55

NORR125-21-MT

FPL7455515R2113

49

IORR4500-10-CC-AME

FPL6816125R2223

40

LORR1700-20

FPL6235210R2113

55

IORR4500-20

FPL6815215R2113

24

LORR1700-30

FPL6235310R2113

55

IORR4500-20-AME

FPL6815225R2223

26

LORR1700-40

FPL6235410R2113

55

IORR4500-20-CC

FPL6816215R2113

38

LORR170-10

FPL7535110R2113

55

IORR4500-20-CC-AME

FPL6816225R2223

40

LORR170-20

FPL7535210R2113

55

NORR125-31-CC

FPL7446715R2113

50

NORR125-31-MT

FPL7455715R2113

49

NORR200-01-CC

FPL7646115R2113

50

NORR200-02-CC

FPL7646215R2113

50

FPL7655215R2113

49

IORR4500-20-MT

FPL6825215R2113

25

LORR170-30

FPL7535310R2113

55

NORR200-02-MT

IORR4500-20-MT-AME

FPL6825225R2123

27

LORR170-40

FPL7535410R2113

55

NORR200-21-CC

FPL7646515R2113

50

IORR4500-30

FPL6815001R2113

24

LORR2100-10

FPL6335110R2113

55

NORR200-21-MT

FPL7655515R2113

49

IORR4500-30-CC

FPL6816001R2113

38

LORR2100-20

FPL6335210R2113

55

NORR200-31-CC

FPL7646715R2113

50

IORR4500-30-MT

FPL6825002R2113

25

LORR2100-30

FPL6335310R2113

55

NORR200-31-MT

FPL7655715R2113

49

IORR500-10-CC

FPL8316115R2113

38

LORR2100-40

FPL6335410R2113

55

NORR400-01

FPL9445115R2113

50

IORR500-10-CC-AME

FPL8316125R2223

40

LORR2500-10

FPL6735110R2113

55

IORR500-20-CC

FPL8316215R2113

38

NORR400-02

FPL9445215R2113

49

LORR2500-20

FPL6735210R2113

55

LORR2500-30

FPL6735310R2113

55

NORR400-02

FPL9445215R2113

50

NORR400-21

FPL9445515R2113

49

NORR400-21

FPL9445515R2113

50
49

IORR500-20-CC-AME

FPL8316225R2223

40

IORR500-20-MT

FPL8325215R2113

25

IORR500-20-MT-AME

FPL8325225R2123

27

LORR260-10

FPL7835110R2113

55

IORR500-30-CC

On request

38

LORR260-20

FPL7835210R2113

55

NORR400-31

FPL9445715R2113

IORR500-30-CC-AME

FPL8316325R2223

40

LORR260-30

FPL7835310R2113

55

NORR400-31

FPL9445715R2113

50

IORR500-30-MT

FPL8325315R2113

25

LORR260-40

FPL7835410R2113

55

NORR63-01-CC

FPL7146116R2113

50

IORR500-30-MT-AME

FPL8325325R2123

27

LORR3200-10

FPL6535110R2113

55

NORR63-02-CC

FPL7146216R2113

50

IORR500-40-MT

FPL8325415R2113

25

LORR3200-20

FPL6535210R2113

55

NORR63-02-MT

FPL7155216R2113

49

NORR63-21-CC

FPL7146516R2113

50

NORR63-21-MT

FPL7155516R2113

49

LORR2500-40

FPL6735410R2113

55

IORR5100-10-CC

FPL6916115R2113

38

LORR3200-30

FPL6535310R2113

55

IORR5100-10-CC-AME

FPL6916125R2223

40

LORR3200-40

FPL6535001R2113

55

IORR5100-20

FPL6915001R2113

24

LORR3800-10

FPL6635110R2113

55

IORR5100-20-CC

FPL6916002R2113

38

LORR3800-20

FPL6635210R2113

55

IORR5100-20-MT

FPL6925001R2113

25

LORR3800-30

FPL6635002R2113

55

IORR5100-30

FPL6915002R2113

24

LORR3800-40

FPL6635003R2113

55

IORR5100-30-CC

FPL6916001R2113

38

LORR400-10

FPL9435110R2113

55

IORR5100-30-MT

FPL6925002R2113

25

LORR400-20

FPL9435210R2113

IORR63-10-CC

FPL7116116R2113

38

LORR400-30

FPL9435310R2113

IORR63-10-CC-AMA

FPL7116136R2123

40

LORR400-40

FPL9435410R2113

IORR63-20-CC

FPL7116216R2113

38

LORR4500-10

IORR63-20-CC-AMA

FPL7116236R2123

40

IORR63-20-MT

FPL7125216R2113

25

IORR63-20-MT-AMA

FPL7125236R2123

27

IORR63-30-CC

On request

38

IORR63-30-CC-AMA

On request

40

IORR63-30-MT

FPL7125386R2113

25

IORR63-30-MT-AMA

FPL7125336R2123

27

IORR63-40-MT

FPL7125416R2113

25

IORR63-40-MT-AMA

FPL7125436R2123

27

IORR800-10-CC-AME

FPL8616125R2223

40

IORR800-10-CC-U

FPL8616195R2113

38

IORR800-10-CC-U

FPL8616195R2113

39

IORR800-20

FPL8615215R2113

24

IORR800-20-AME

FPL8615225R2223

26

IORR800-20-CC

FPL8616215R2113

38

IORR800-20-CC-AME

FPL8616225R2223

40

IORR800-20-MT

FPL8625215R2113

25

IORR800-20-MT-AME

FPL8625225R2123

27

IORR800-30

FPL8615315R2113

24

IORR800-30-AME

FPL8615325R2223

26

IORR800-30-CC

FPL8616315R2113

38

IORR800-30-CC-AME
IORR800-30-MT

FPL8616325R2223
FPL8625315R2113

40
25

NORR63-31-CC

FPL7146716R2113

50

NORR63-31-MT

FPL7155716R2113

49

NORR800-01-CC

FPL8646115R2113

50

NORR800-02

FPL8645215R2113

49

55

NORR800-02-CC

FPL8646215R2113

50

55

NORR800-02-MT

FPL8655215R2113

49

55

NORR800-21

FPL8645515R2113

49

FPL6835110R2113

55

NORR800-21-CC

FPL8646515R2113

50

LORR4500-20

FPL6835210R2113

55

NORR800-21-MT

FPL8655515R2113

49

LORR4500-30

FPL6835001R2113

55

NORR800-31

FPL8645715R2113

49

LORR5100-10

FPL6935110R2113

55

NORR800-31-CC

FPL8646715R2113

50

LORR5100-20

FPL6935001R2113

55

LORR550-10

FPL8435110R2113

55

NORR800-31-MT

FPL8655715R2113

49

RECTIFIER BRIDGE

TRE2614501

82

TRE2720806

82

LORR550-20

FPL8435210R2113

55

LORR550-30

FPL8435310R2113

55

RECTIFIER BRIDGE

LORR550-40

FPL8435410R2113

55

RV-R1/133

FPTN410463R6002

82

LORR800-10

FPL8635110R2113

55

RV-R1/250

FPTN410463R6003

82

LORR800-20

FPL8635210R2113

55

RV-R1/440

FPTN410463R6004

82

LORR800-30

FPL8635310R2113

55

RV-R1/60

FPTN410463R6001

82

LORR800-40

FPL8635410R2113

55

RV-R1/660

FPTN410463R6005

82

LORR85-10

FPL7235110R2113

55

LORR85-20

FPL7235210R2113

55

SHAFT EXTENSION
R200… R420

FPTN410111R0002

84

LORR85-30

FPL7235310R2113

55

LORR85-40

FPL7235410R2113

55

SHAFT EXTENSION
R400, 500 550

FPTN410111R0003

84

82

SHAFT EXTENSION
R63… R170

FPTN410111R0001

84

MAGNET SET FOR
MAIN COIL

FPTN410437R0001

MAGNET SET FOR
MAIN COIL

FPTN410438R0001

82

UNIVERSAL
MOUNTING KIT

FPTN410054R0016

77

MAGNET SET FOR
MAIN COIL

FPTN410439R0001

82

VM15-SP

FPL8301401R0002

83

VM16

FPL8601401R0001

83

FPL8801401R0001

83

MAGNET SET FOR
MAIN COIL

FPTN410441R0001

82

VM17/18

IORR800-30-MT-AME

FPL8625325R2123

27

IORR800-40

FPL8615415R2113

24

MAGNET SET FOR
MAIN COIL

FPTN410200R0006

82

VM19

FPL9001401R0001

83

FPTN410054R0017

77

VM21/24

FPL7101403R0001

83

IORR800-40-AME

FPL8615425R2223

26

MOUNTING KIT

IORR800-40-MT

FPL8625415R2113

25

MOUNTING KIT

FPTN410213R0006

77

VM25

FPL7401404R0001

83

LORR1400-10

FPL6135110R2113

55

NORR125-01-CC

FPL7446115R2113

50

VM27

FPL8001401R0001

83

R contactor US catalog | 1SXU106047C0201

12

135

Notes

136

1SXU10607C0201 | R contactor US catalog

ABB
Low Voltage Products
8155 T&B Boulevard
Memphis, TN 38125
www.abb.us/lowvoltage
USA Technical Support: 888-385-1221
Customer Service: 888-862-3290
7:00 a.m.-5:30 p.m., CST, Monday-Friday
lvps.support@us.abb.com

R contactors

www.abb.com/lowvoltage

Note
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. ABB does not accept any responsibility
whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization of its contents – in whole or in parts – is
forbidden without prior written consent of ABB.
Copyright © 2015 ABB - All rights reserved

1SXU106047C0201 - Printed in US July 2015

Contact us

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : USDOTHU
Create Date                     : 2015:07:08 09:26:13-05:00
Modify Date                     : 2015:07:09 11:46:53-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 15.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:07:09 11:46:53-05:00
Format                          : application/pdf
Title                           : R-Contactor.indb
Creator                         : USDOTHU
Document ID                     : uuid:081809fc-72f2-4b46-a82f-668e90905cd1
Instance ID                     : uuid:7f054e61-1790-41d0-9e1b-2f0fcb5a9a30
Page Count                      : 137

EXIF Metadata provided by EXIF.tools

R Contactor.indb Brochure

Navigation menu

Versions of this User Manual:

Views

Navigation