Product Detail Manual
2014-09-04
: Pdf 100106-Attachment 100106-Attachment 781052 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 58
| Download | |
| Open PDF In Browser | View PDF |
Table of Contents CATEGORY / NAME SERIES PAGE LC LPC BN TWH / RDH EF PLX DEC DGP CKHA FFIH CXD AC DCH EMC DGWH 2 4 6 8 10 11 12 13 14 15 16 17 18 18 19 AF6 AS8 AF12 AS12 AF20 CH RFI / RFV / RFF EWA BLAST / ONE 20 22 24 26 28 30 32 34 36 VUB DX-234 DX-233 EU CUH 7150 FPEP / CEP CRT / KR / KRR 38 40 42 44 46 47 48 50 Line Voltage Thermostat Low Voltage Thermostat Digital Electronic Line Voltage Thermostats NEW! Digital Electronic Low Voltage Thermostats NEW! Relay Kits & Transformers TS / TD / ETS / ETD T8 / CCTHV HTC THC LVR / AT72D 52 52 53 54 55 TRIAC Relays NEW! CCT / CCTHV 55 Residential Heaters Linear Convector Heater NEW! Linear Proportional Convector Heater NEW! Baseboard Heater Fan Forced Wall Insert Heater Deluxe Wall Mounted Fan Heater Panel Convection Heater Deluxe Electronic Panel Convection Heater Onyx Glass Panel Heater NEW! Kick Space Heater Floor Drop-In Heater Ceramic Indoor / Outdoor Radiant Heater Downflow Heater Portable Construction Heater Enclosed Motor Construction Heater Garage / Workshop Heater Commercial Heaters Architectural Draft Barrier Heater (Small) Architectural Slope Top Heater (Small) Architectural Convection Heater (Medium) Architectural Slope Top Heater (Medium) Architectural Convection Heater (Large) Cabinet Console Heater Commercial Fan-Forced Heater Commercial Fan-Forced Heater Commercial Hand Dryer NEW! Industrial Heaters Vertical Unit Heater Hose Down Heater NEW! Explosion Proof Heater NEW! Industrial Unit Heater Compact Unit Heater Pump House Heater Hazardous Location Convection Heater Radiant Heater Controls Dimplex Story Mission Statement Warranty 56 56 LC Series Linear Convector Heater Revolutionary design provides a sleek, compact heater profile, while improving heater performance, reducing energy consumption, and improving comfort. Features • Faster heating of the room than a conventional baseboard due to rapid vertical laminar air flow, directing heat to the ceiling, speeding dispersal of warm air into the center of the room • Improved performance and reduced length through use of top heat discharge and new fin design • Superior shark-fin blade design on a steel tubular element for improved heat transfer and longer life • Discreet styling, reduced length and added versatility of placement provide more options when designing a room Top mounted thermostat can be installed on either side of LC (optional) Specifications Voltage 120, 208, 240, 347V • May be used with wall, or top mounted built-in thermostat (not included) Wattage Sizes ranging from 500W to 2500W Colour White or Almond Finish • Full length automatic overheat reset for safety Specially-formulated epoxy / polyester powder coating is environmentally friendly, and resists fading and abrasion. Construction Robust, 20 gauge steel construction. Heating Element A nickel chromium element is totally enclosed within a steel sheath, providing superior life expectancy and resistance to rust. Shark-fin shaped aluminum fins are firmly staked in an upright position to provide directional wicking for top discharge heat transfer. Installation Easily removed front caps, knock-outs on both sides of the convector, and pre-stamped mounting holes make installation easy. Warranty Ten year element warranty. One year warranty on complete unit. CSA certified for use in Canada and the U.S. Applications • All residential applications, commercial offices, lobbies, washrooms 2 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com LC Series Ordering Guide Cat. No. Watts Volts BTU Length (mm/in.) Weight (kg/lbs.) Cat. No. Watts Volts BTU Length (mm/in.) Weight (kg/lbs.) LC2005W11 500 120 1706 508/20 1.7/3.75 LC3512W31 1250/938 240/208 4265/3199 889/35 2.9/6.40 LC2005W21 500 208 1706 508/20 1.7/3.75 LC3512W51 1250 347 4265 889/35 2.9/6.40 LC2005W31 500/375 240/208 1706/1280 508/20 1.7/3.75 LC4015W11 1500 120 5118 1016/40 3.2/7.50 LC2005W51 500 347 1706 508/20 1.7/3.75 LC4015W21 1500 208 5118 1016/40 3.2/7.50 LC2507W11 750 120 2559 635/25 2/4.40 LC4015W31 1500/1125 240/208 5118/3839 1016/40 3.2/7.50 LC2507W21 750 208 2559 635/25 2/4.40 LC4015W51 1500 347 5118 1016/40 3.2/7.50 LC2507W31 750/563 240/208 2559/1919 635/25 2/4.40 LC5020W21 2000 208 6824 1270/50 3.7/8.20 LC2507W51 750 347 2559 635/25 2/4.40 LC5020W31 2000/1500 240/208 6824/5120 1270/50 3.7/8.20 LC3010W11 1000 120 3412 762/30 2.3/5.00 LC5020W51 2000 347 6824 1270/50 3.7/8.20 LC3010W21 1000 208 3412 762/30 2.3/5.00 LC6025W21 2500 208 8530 1524/60 4.4/9.70 LC3010W31 1000/750 240/208 3412/2559 762/30 2.3/5.00 LC6025W31 2500/1875 240/208 8530/6398 1524/60 4.4/9.70 LC3010W51 1000 347 3412 762/30 2.3/5.00 LC6025W51 2500 347 8530 1524/60 4.4/9.70 LC3512W11 1250 120 4265 889/35 2.9/6.40 LC3512W21 1250 208 4265 889/35 2.9/6.40 Note: 1) Standard colour is White. 2) To order Almond omit “W” in Cat. No. Control Options (field installed) Thermostat Kits Relays - Mechanical Cat. No. Description Rating Cat. No. Description Rating DTK-SP Single pole built-in thermostat kit (adjustable) 120-240V, 17A 347V, 14A BLLVC11 Low voltage relay & transformer kit 120V, 22A BLLVC21 Low voltage relay & transformer kit 208V, 22A Double pole built-in thermostat (adjustable) 120-240V, 17A 347V, 11A BLLVC31 Low voltage relay & transformer kit 240V, 22A DTKT-SP Single pole built-in tamperproof thermostat kit 120-240V, 17A 347V, 11A BLLVC51 Low voltage relay & transformer kit 347V, 17A BLLVD DTKT-DP Double pole built-in tamperproof thermostat kit 120-240V, 25A 347V, 11A Low voltage relay less transformer kit 120/208/240, 22A 347V, 17A BUS2 Disconnect switch, double pole 277V, 25A DTK-DP Note: Each adjustable kit contains white and almond control knobs and hardware Dimensions Relays - TRIAC CCT-06-1-S Without transformer 600V, 6A CCT-15-1-S Without transformer 347V, 15A CCT-15-1-S-T Comes with transformer 347V, 15A CCT-15-1-S-T240 Comes with transformer 208/240V, 15A BOTTOM VIEW TOP VIEW 59.8 mm 2 3/8" INCLUDED HIT-LOCK CONNECTORS IN BOTH ENDS FRONT VIEW 89.5 mm 3 1/2" "A" 29.2 mm 1 1/8" 43.4 mm 1 11/16" BACK VIEW 25.4 mm 1" SIDE VIEW 89.5 mm 3 1/2" 108.8 mm 4 5/16" 64.3 mm 2 1/2" 169.0 mm 6 5/8" 39.4 mm 1 9/16" “A” – see Length in Ordering Guide 32.5 mm 1 1/4" 29.2 mm 1 1/8" 5.0 mm 3/16" SLOT 2.5 mm R1/8" X 10 NOTE: ALL KNOCK OUTS ARE 7/8" FOR 1/2" CONDUIT to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 3 LPC Series Linear Proportional Convector Heater Revolutionary heater with a built-in electronic thermostat with heat proportioning for improved performance and reduced energy consumption. Features • New electronic proportioning thermostat, with CSA-C828 compliant control (+/-0.5ºC/1ºF), RF transceiver for on-board temperature control and heater-to-heater telegraphing • Faster heating of the room than a conventional baseboard due to rapid vertical laminar air flow, directing heat to the ceiling, speeding dispersal of warm air into the center of the room • Improved performance and reduced length through use of top heat discharge and new fin design • Superior shark-fin blade design on a steel tubular element for improved heat transfer and longer life • Discreet styling, reduced length and added versatility of placement provide more options when designing a room • Full length automatic overheat reset for safety • Optional wall mounted remote control for multi-heater temperature regulation Wall mounted Onboard thermostat remote control (optional; wall plate not included) Specifications Voltage 120, 208, 240, 347V Wattage Sizes ranging from 500W to 2500W Colour White or Almond Finish Specially-formulated epoxy / polyester powder coating is environmentally friendly and resists fading and abrasion. Construction Robust, 20 gauge steel construction. Heating Element A nickel chromium element is totally enclosed within a steel sheath, providing superior life expectancy and resistance to rust. Shark-fin shaped aluminum fins are firmly staked in an upright position to provide directional wicking for top discharge heat transfer. Controls & Wiring Supplied with an installed electronic proportioning thermostat for CSAC828 compliant control; an RF transceiver for remote heat control and whole-home temperature syncing. Wall mounted remote control for user convenience (optional accessory). Installation Easily removed front caps, knock-outs on both sides of the convector; and pre-stamped mounting holes make installation easy. Warranty Ten year element warranty. One year warranty on complete unit. One year warranty on wall mounted remote control. CSA certified for use in Canada and the U.S. Applications • All residential applications, commercial offices, lobbies, washrooms 4 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com LPC Series Ordering Guide Cat. No. Watts Volts BTU Length (mm/in.) Weight (kg/lbs.) Cat. No. Watts Volts BTU Length (mm/in.) Weight (kg/lbs.) PC2005W11 500 120 1706 508/20 1.8/4.00 PC3512W31 1250/938 240/208 4265/3199 889/35 3.0/6.65 PC2005W21 500 208 1706 508/20 1.8/4.00 PC3512W51 1250 347 4265 889/35 3.0/6.65 PC2005W31 500/375 240/208 1706/1280 508/20 1.8/4.00 PC4015W11 1500 120 5118 1016/40 3.5/7.75 PC2005W51 500 347 1706 508/20 1.8/4.00 PC4015W21 1500 208 5118 1016/40 3.5/7.75 PC2507W11 750 120 2559 635/25 2.1/4.65 PC4015W31 1500/1125 240/208 5118/3839 1016/40 3.5/7.75 PC2507W21 750 208 2559 635/25 2.1/4.65 PC4015W51 1500 347 5118 1016/40 3.5/7.75 PC2507W31 750/563 240/208 2559/1919 635/25 2.1/4.65 PC5020W21 2000 208 6824 1270/50 3.8/8.45 PC2507W51 750 347 2559 635/25 2.1/4.65 PC5020W31 2000/1500 240/208 6824/5120 1270/50 3.8/8.45 PC3010W11 1000 120 3412 762/30 2.4/5.25 PC5020W51 2000 347 6824 1270/50 3.8/8.45 PC3010W21 1000 208 3412 762/30 2.4/5.25 PC6025W21 2500 208 8530 1524/60 4.5/9.95 PC3010W31 1000/750 240/208 3412/2559 762/30 2.4/5.25 PC6025W31 2500/1875 240/208 8530/6398 1524/60 4.5/9.95 PC3010W51 1000 347 3412 762/30 2.4/5.25 PC6025W51 2500 347 8530 1524/60 4.5/9.95 PC3512W11 1250 120 4265 889/35 3.0/6.65 PC3512W21 1250 208 4265 889/35 3.0/6.65 Note: Standard colour is White. Consult factory to order Almond. Accessories Cat. No. Description BUS2 Disconnect switch, double pole, 277V/25A DPCRWS White wall mounted remote control with RF set point (wall plate not included) MPDPCRWS White wall mounted remote control with RF set point – bulk (wall plate not included) (optional; wall plate not included) Dimensions BOTTOM VIEW TOP VIEW 59.8 mm 2 3/8" FRONT VIEW 89.5 mm 3 1/2" "A" INCLUDED HIT-LOCK CONNECTORS IN BOTH ENDS SIDE VIEW BACK VIEW 29.2 mm 1 1/8" 43.4 mm 1 11/16" 25.4 mm 1" 89.5 mm 3 1/2" 108.8 mm 4 5/16" 64.3 mm 2 1/2" 169.0 mm 6 5/8" 39.4 mm 1 9/16" “A” – see Length in Ordering Guide 32.5 mm 1 1/4" 29.2 mm 1 1/8" 5.0 mm 3/16" SLOT 2.5 mm R1/8" X 10 NOTE: ALL KNOCK OUTS ARE 7/8" FOR 1/2" CONDUIT to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 5 BN Series Baseboard Heater Slim contoured design is the perfect complement to both contemporary and traditional décors. Features • Exclusive contoured design with safe rounded endcaps and attractive styling • May be used with wall, or unique side mounted built-in thermostat (not included) • Superior finned tubular element design for safety and long life Unique side mount optional thermostat may be installed from the rear without removing front panel. Specifications • Large rear-entry junction boxes on both sides for quick and easy installation Voltage 120, 208, 240, 277, 347, 600V Wattage Sizes ranging from 300W to 2500W • Full-length automatic reset overheat protection for safety Colour White or Almond Finish Specially-formulated epoxy / polyester powder coating is environmentally friendly and resists fading and abrasion. Heating Element A nickel chromium element is totally enclosed within a stainless steel sheath providing superior life expectancy and resistance to rust. Aluminum fins are firmly staked to the surface to provide excellent heat transfer. Installation Large rear entry left and right junction boxes provide ease of installation. Warranty Ten year element warranty. One year warranty on complete unit. CSA certified and UL approved. Applications • All residential applications, commercial offices, washrooms, lobbies Control Options (field installed) Relays Thermostat Kits Cat. No. Description Rating Cat. No. Description Rating DTK-SP Single pole built-in thermostat kit (adjustable) 120-240V, 17A, 347V, 14A, 600V, 10A BLLVD Low voltage relay less transformer kit 120/208/240, 22A, 347V, 17A, 600V, 10A DTK-DP Double pole built-in thermostat (adjustable) 120-240V, 17A, 347V, 11A, 600V, 10A BUS2 Disconnect switch, double pole 277V, 25A DTKT-SP Single pole built-in tamperproof thermostat kit 120-240V, 17A, 347V, 11A DTKT-DP Double pole built-in tamperproof thermostat kit 120-240V, 25A, 347V, 11A, 600V, 10A Note: Each adjustable kit contains white and almond control knobs and hardware Relays Cat. No. Description Rating BLLVC11 Low voltage relay & transformer kit 120V, 22A BLLVC21 Low voltage relay & transformer kit 208V, 22A BLLVC31 Low voltage relay & transformer kit 240V, 22A BLLVC41 Low voltage relay & transformer kit 277V, 22A BLLVC51 Low voltage relay & transformer kit 347V, 17A BLLVC81 Low voltage relay & transformer kit 600V, 10A Inside Corners Cat. No. Description BNIC Almond BNICW White Note: Inside corners are used when continuous installation of baseboard cabinetry inside 90 degree corners is designed. 6 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com BN Series Ordering Guide Cat. No. Watts BTU Volts Length (mm/in.) Weight (kg/lbs.) Cat. No. Watts BTU Volts Length (mm/In.) Weight (kg/lbs.) BN2203W11 300 1024 120 560/22 1/8 2.3/5 BN6615W21 1500 5118 208 1670/65 3/4 5.9/13 BN2203W21 300 1024 208 560/22 1/8 2.3/5 BN6615W31 1500/1125 5118/3839 240/208 1670/65 3/4 5.9/13 BN6615W41 1500/1125 5118/3839 277/240 1670/65 3/4 5.9/13 BN2203W31 300/225 1024/768 240/208 560/22 1/8 2.3/5 BN2203W41 300 1024 277 560/22 1/8 2.3/5 BN6615W51 1500 5118 347 1670/65 3/4 5.9/13 BN2805W11 500 1706 120 700/27 5/8 2.7/6 BN6615W81 1500 5118 600 1670/65 3/4 5.9/13 BN2805W21 500 1706 208 700/27 5/8 2.7/6 BN7517W21 1750 5971 208 1900/74 3/4 7.3/16 BN2805W31 500/375 1706/1280 240/208 700/27 5/8 2.7/6 BN7517W31 1750/1313 5971/4478 240/208 1900/74 3/4 7.3/16 BN2805W41 500/375 1706/1280 277/240 700/27 5/8 2.7/6 BN7517W41 1750/1313 5971/4478 277/240 1900/74 3/4 7.3/16 BN2805W51 500 1706 347 700/27 5/8 2.7/6 BN7517W51 1750 5971 347 1900/74 3/4 7.3/16 BN3907W11 750 2559 120 980/38 5/8 4.1/9 BN7517W81 1750 5971 600 1900/74 3/4 7.3/16 BN3907W21 750 2559 208 980/38 5/8 4.1/9 BN8420W21 2000 6824 208 2130/83 7/8 7.7/17 BN8420W31 2000/1500 6824/5120 240/208 2130/83 7/8 7.7/17 BN3907W31 750/563 2559/1919 240/208 980/38 5/8 4.1/9 BN3907W41 750/563 2559/1919 277/240 980/38 5/8 4.1/9 BN8420W41 2000/1500 6824/5120 277/240 2130/83 7/8 7.7/17 BN3907W51 750 2559 347 980/38 5/8 4.1/9 BN8420W51 2000 6824 347 2130/83 7/8 7.7/17 BN3907W81 750 2559 600 980/38 5/8 4.1/9 BN8420W81 2000 6824 600 2130/83 7/8 7.7/17 BN4810W11 1000 3412 120 1210/47 5/8 4.5/10 BN9322W21 2250 7677 208 2360/92 7/8 8.6/19 BN4810W21 1000 3412 208 1210/47 5/8 4.5/10 BN9322W31 2250/1688 7677/5758 240/208 2360/92 7/8 8.6/19 BN4810W31 1000/750 3412/2559 240/208 1210/47 5/8 4.5/10 BN9322W41 2250/1688 7677/5758 277/240 2360/92 7/8 8.6/19 BN4810W41 1000/750 3412/2559 277/240 1210/47 5/8 4.5/10 BN9322W51 2250 7677 347 2360/92 7/8 8.6/19 BN4810W51 1000 3412 347 1210/47 5/8 4.5/10 BN9322W81 2250 7677 600 2360/92 7/8 8.6/19 BN10225W21 2500 8530 208 2590/102 9.1/20 BN4810W81 1000 3412 600 1210/47 5/8 4.5/10 BN5712W11 1250 4265 120 1440/56 11/16 5.4/12 BN10225W31 2500/1875 8530/6398 240/208 2590/102 9.1/20 BN5712W21 1250 4265 208 1440/56 11/16 5.4/12 BN10225W41 2500/1875 8530/6398 277/240 2590/102 9.1/20 BN5712W31 1250/938 4265/3199 240/208 1440/56 11/16 5.4/12 BN10225W51 2500 8530 347 2590/102 9.1/20 BN5712W41 1250/938 4265/3199 277/240 1440/56 11/16 5.4/12 BN10225W81 2500 8530 600 2590/102 9.1/20 Note: 1) Standard colour is White. 2) To order Almond omit “W” in Cat. No. BN5712W51 1250 4265 347 1440/56 11/16 5.4/12 BN5712W81 1250 4265 600 1440/56 11/16 5.4/12 BN6615W11 1500 5118 120 1670/65 3/4 5.9/13 Dimensions FRONT VIEW REAR VIEW SIDE VIEW TO BOTTOM VIEW to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 7 TWH Series Fan Forced Wall Insert Heater Compact multi-purpose unit ideal for use where space is limited. Instant heat to replace cold air where exterior doors are prevalent. Multi-Directional Grille Features Register Style Grille • Fully louvered grille • Register style grille available • Superior finned tubular element design for safety and long life • Automatic reset thermal cutout for maximum safety Enclosed Steel Sheathed Element Design • Recessed mounting in spaces as shallow as 3" Applications • Hallways, kitchens, basements, bathrooms and workshops Multi-Directional Grille can be mounted in any configuration NOTE: Model shown with optional onboard thermostat. Specifications Control Options (field installed)* Cat. No. Description Rating TWHT1 Single pole thermostat kit 22A, 120/240V TWHT2 Double pole thermostat kit 22A, 120/240V Voltage 120, 208, 240V Wattage Sizes ranging from 500W to 2000W Colour White or Almond Airflow 45 CFM – fan blades engineered for quiet operation Finish Specially formulated polyester powder coating process is applied to the front panel which resists fading and abrasion. Construction The front panel is constructed of 22 gauge steel and the housing is complete with knockouts for field wiring. Heating Element A nickel chromium element is totally enclosed within a steel element sheath and spiral steel fins are firmly brazed to the surface to provide excellent heat transfer. Controls & Wiring A thermostat control (either wall or built-in) is required to operate this unit. Optional built-in thermostat is positioned below the element for superior temperature control. The unit has a large wiring compartment which makes power connections quick and easy. Warranty 10 year element warranty. Two year warranty on complete unit. CSA certified for use in Canada and the U.S. *Cannot be used with register style grilles. Accessories (field installed) Cat. No. Description Dimensions Cat. No. Description TWHSBA Surface mount box (almond) 9 7/8" w x 17 1/8"h x 3 3/8" d TWHC Separate wall can TWHSBW Surface mount box (white) 9 7/8" w x 17 1/8" h x 3 3/8" d TWHA Multi-grille (almond) TWHRA Register style grille (almond) 17" w x 9" h x 15/16" d TWHW Multi-grille (white) TWHRW Register style grille (white) 17" w x 9" h x 15/16" d 8 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com TWH Series Ordering Guide – TWH Multi-Wattage Models Cat. No. Colour Voltage Watts BTU TWH0731B† None 240/208 750/562 TWH1031B† None 240/208 1000/750 TWH1531B† None 240/208 1500/1125 Weight (kg/lbs.) Phase CFM 2559/1919 1 48 3.6/8 3412/2559 1 48 3.6/8 5118/3838 1 48 3.6/8 TWH2031B None 240/208 2000/1500 6824/5118 1 48 3.6/8 TWH1011CA Almond 120 1000 3412 1 48 3.6/8 TWH1511CA Almond 120 1500 5118 1 48 3.6/8 † TWH0731CA Almond 240/208 750/562 2559/1919 1 48 3.6/8 TWH1031CA Almond 240/208 1000/750 3412/2559 1 48 3.6/8 TWH1531CA Almond 240/208 1500/1125 5118/3838 1 48 3.6/8 TWH2031CA Almond 240/208 2000/1500 6824/5118 1 48 3.6/8 TWH0511CW White 120 500 1706 1 48 3.6/8 TWH0711CW White 120 750 2559 1 48 3.6/8 TWH1011CW White 120 1000 3412 1 48 3.6/8 TWH1511CW White 120 1500 5118 1 48 3.6/8 TWH0531CW White 240/208 500/375 1706/1280 1 48 3.6/8 TWH0731CW White 240/208 750/562 2559/1919 1 48 3.6/8 TWH1031CW White 240/208 1000/750 3412/2559 1 48 3.6/8 TWH1531CW White 240/208 1500/1125 5118/3838 1 48 3.6/8 TWH2031CW White 240/208 2000/1500 6824/5118 1 48 3.6/8 † Almond 240 750/1500 2559/5118 1 48 3.6/8 RDH2010TCA† Almond 240 1000/2000 3412/6824 1 48 3.6/8 RDH1507TCW† White 240 750/1500 2559/5118 1 48 3.6/8 RDH2010TCW White 240 1000/2000 3412/6824 1 48 3.6/8 RDH1507TCA † † Bulk Packaged Models (Interior only – less front grille and recess mount box) – available in United States only. RDH Dual Element Models – C/W Built-in Thermostat & Multi-Directional Front Grille – available in United States only. Dimensions 203mm (8") 14mm (9/16") REGISTER STYLE GRILLE 427mm (17") 228mm (9") WALL OPENING 362mm (14 1/4") 219mm (8 5/8") SURFACE BOX 228mm (9") 29mm (1 1/8") 251mm (9 7/8") 83mm (3 1/4") 35mm (1 3/8") 435mm (17 1/8") 427mm (17") 362mm (14 1/4") HEATER Minimum Depth of Opening – 86mm (3 3/8") 3/4” K.O. (both sides) to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 9 EF Series Deluxe Wall Mounted Fan Heater Premium residential wall heater enables dual heat output where rapid heat-up is required. Features • Built-in thermostat, 60 minute timer boosts output to 2000W • Splash-proof construction • Quiet performance • Automatic reset high limit protection Specifications • Easy-mount wall bracket • Frost protection settings (at 5ºC/41ºF unit will automatically turn on) Voltage 240/208 volts Wattage 1000/750 W (2000/1500 W with timer) Colour White • Surface mount application Finish Powder coat finish for easy cleaning Construction Attractively designed front cover is constructed of tough, durable 20 gauge galvanized steel. Fan Long lasting, quiet performance is guaranteed by the heavy duty fan motor and molded plastic centrifugal impeller fan. The two speed fan combined with a 60 minute timer provide increased heat when timer is activated. Warranty Two year limited warranty on complete unit. CSA/NRTL certified for use in Canada and the U.S. Applications • Kitchen, bathrooms, hallways & foyers Ordering Guide Cat. No. Watts BTU Volts Dimensions (W x H x D) Weight (kg/lbs.) EF12 1000/2000 750/1500 3412/6824 2559/5118 240 208 300mm x 405mm x 120mm (12" x 16" x 4.75") 4 / 8.8 Dimensions FRONT VIEW SIDE VIEW 300mm (12") 120mm (4 3/4") 405mm (16") BACK VIEW 190mm (7 1/2") 300mm (12") 10 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com PLX Series Panel Convection Heater Attractive, clean design with appliance-quality finish in pristine white to blend with any décor. Features • Silent, convection heating; no moving parts • Moves warm air quickly and evenly without a fan Available in Canada only • High performance in a compact design Specifications • Designed for use with electronic or conventional wall thermostats Wattage 750, 1000, 1500 & 2000W Colour White • Automatic reset high limit protection Finish Polyester powder coated finish on body and grille. Construction Attractive European designed front cover is constructed of durable 20 gauge steel. Includes cable and faceplate cover. The hinged wall mounting frame detaches from unit back for easy installation and incorporates “tilt forward” feature for wall cleaning (for use with remote wall mounted thermostat – suggest TS521W). Heating Element Finned, steel sheathed element for durability and efficient heat transfer. Warranty Two year limited warranty on complete unit. 10 year element warranty. CSA certified. • Ideal for retro-fits Applications • Family rooms, living rooms, bedrooms, home offices Ordering Guide Cat. No. Volts Watts A B C Weight (kg/lbs.) PLX075NN 240/208 750/562 620mm/24.4" 430mm/16.9" 108mm/4.3" 6.2/13.6 PLX100NN 240/208 1000/750 620mm/24.4" 430mm/16.9" 108mm/4.3" 6.2/13.6 PLX150NN 240/208 1500/1125 690mm/27.1" 430mm/16.9" 108mm/4.3" 6.6/14.5 PLX200NN 240/208 2000/1500 860mm/33.9" 430mm/16.9" 108mm/4.3" 8.0/17.6 Dimensions FRONT VIEW SIDE VIEW CLOSED B 5.9" 150mm MIN B (A) 5.9" (150mm) MIN (C) 4.3" (108mm) (B) 16.9" (430mm) 5.9" (150mm) MIN to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 11 DEC Series Deluxe Electronic Panel Convection Heater Electronic convection heaters provide quiet, even heat, with no moving parts; utilizing natural airflow to distribute heat evenly throughout rooms. Features • Extremely sensitive electronic thermostat accurate to within 0.5º C (1º F); helps to maintain even room temperature • Sophisticated built-in electronic controls – help reduce operating costs • Smooth, sleek panel design – fits virtually any room’s décor Specifications • Detachable wall-mount brackets, power supply wire and junction box covers – ensure quick and easy installation Wattage 750, 1000, 1500 & 2000W Colour White Finish Polyester powder coated finish on body and grille. • Surface mount application only Construction Modern designed front cover is constructed of strong, durable 20 gauge steel. Unit features detachable wall mount brackets which allow for quick installation. Includes built-in electronic thermostat. Heating Element Finned, steel sheathed element for durability and efficient heat transfer. Warranty Two year limited warranty on complete unit. 10 year element warranty. CSA certified for use in Canada and the U.S. Applications • Home office, bedroom, media room Ordering Guide Cat. No. Volts Watts Dimensions (W x H x D) Weight (kg/lbs.) DEC750H 240/208 750/562 359mm x 400mm x 110mm (14.1" x 15.7" x 4.3") 4.5/10.0 DEC1000H 240/208 1000/750 448mm x 400mm x 110mm (17.6" x 15.7" x 4.3") 6.1/13.4 DEC1500H 240/208 1500/1125 600mm x 400mm x 110mm (23.6" x 15.7" x 4.3") 6.6/14.6 DEC2000H 240/208 2000/1500 838mm x 400mm x 110mm (33" x 15.7" x 4.3") 7.3/16.0 Electronic thermostat provides steady even heat and more comfort. Dimensions FRONT VIEW SIDE VIEW BACK VIEW 12 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com DGP Series Onyx Glass Panel Heater The hottest look in heat. Attractive, clean design with appliance-quality finish and sleek, contemporary black glass front panel. Features • 1500W output • Convected heat for rapid warm up • Electronic thermostat control provides room temperature stability to +/- 0.3ºC/0.5ºF • Soft touch On/Off switch and neon indicator • Detachable hinged wall mounting frame Specifications • Completely silent operation Applications • Family rooms, living rooms, bedrooms, home offices and kitchens. Wattage 1500W Colour Black Finish Glass front panel with appliance quality finished cabinet. Construction Flat glass front panel, steel case and plastic electronics junction box. Heating Element Finned, steel sheathed element for durability and efficient heat transfer. Warranty Two year warranty on complete unit. CSA certified for use in Canada and the U.S. Ordering Guide Cat. No. Volts Watts Dimensions (W x H x D) Weight (kg/lbs.) DGP1500-B 240/208 1500/1125 770mm x 565mm x 107mm (30.8" x 22.6" x 4.25") 16.4/36.2 Dimensions FRONT VIEW SIDE VIEW 770mm (30.8") 107mm (4.25") TOP VIEW BACK VIEW 565mm (22.6") to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential heaters | 13 CKHA Series Kick Space Heater Low-profile fan-forced heater that provides comfort in places where space is limited (i.e. under-counter, stair riser etc.). Features • Single model offers flexible wattage output with voltage selection • Makes an economical floor warmer • Superior finned tubular element design Specifications • Automatic primary and secondary reset thermal cutout for safety • Pilot light will activate if unit trips on high limit Applications • Kitchen or bathroom under-cabinet, stair riser Ordering Guide Cat. No. Watts BTU Volts Weight (kg/lbs.) CKHA20D31 450 1535 120 6.4/14 900 3071 120 1350 4606 120 1800 6142 120 900/675 3071/2303 240/208 1800/1350 6142/4606 240/208 Note: Standard colour is Black – To order White add “W” at end of Cat. No. Factory wired at 240/208V for 900/675W Voltage 120, 240/208V Wattage Five outputs ranging from 450W to 1800W Colour Black or White Airflow 80 CFM Finish Specially formulated polyester powder coating process is applied to the front panel which resists fading and abrasion. Construction The enclosure is constructed of 20 gauge steel. Horizontal mount only. Heating Element The Kick Space heater has four totally enclosed nickel chromium resistance elements with steel sheaths. The elements are complete with spiral steel fins that are brazed to the steel sheath to provide excellent heat transfer. Controls & Wiring The Kick Space heater is factory wired for 240/208V @ 900/675W and is field convertible for 240/208V @ 1800/1350W, 120V @ 450, 900, 1350, or 1800W configuration. The unit is controllable from a line voltage wall thermostat or field installed built-in tamperproof single or double pole thermostat kit. Warranty One year warranty on complete unit. CSA certified and UL approved. Dimensions TOP VIEW 562mm[22 1/8"] LEFT SIDE BACK VIEW Description Single pole thermostat CKHATD23 Double pole thermostat Note: Thermostats are adjustable by slotted screw adjustment through front grille only 45mm [1 3/4"] 25mm[1"] FRONT VIEW LEFT SIDE Tamperproof Thermostat Kits CKHATD13 241mm [9 1/2"] S 89mm[3 1/2"] S Control Options (field installed) Cat. No. WIRING JUNCTION BOX 22mm[7/8"] DIA. K.O. 2 PLACES 613mm [24 1/8"] 114mm [4 1/2"] 45mm [1 3/4"] 51mm [2"] 14 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com FFIH Series Floor Drop-In Heater Designed for fan-forced comfort where floor mounting is desired. Features • Compact design • Superior finned tubular element design • Manual and automatic reset thermal cutout provides protection against overheating Specifications • Safety screen keeps foreign objects out • Quick release interior for easier cleaning Applications • Hallways, entryways, solariums, & staircase landings Ordering Guide Cat. No. FFIH15A31A-KIT Watts BTU Volts Weight (kg/lbs.) 7.3/16 375 1280 120 750 2559 120 1125 3839 120 1500 5118 120 750/563 2559/1918 240/208 1500/1125 5118/3839 240/208 Note: Factory wired at 240/208V for 1500/1125W. Standard colour is Almond – To order White replace “A” with “W” in Cat. No. Example: FFIH15A31W-KIT Dimensions Voltage 120, 240/208V Wattage Five outputs ranging from 375W to 1500W Colour Almond Airflow 80 CFM Finish Specially formulated polyester powder coating process is applied to the front panel which resists fading and abrasion. Construction The housing is constructed of 18 gauge satin coat steel complete with knockouts to accommodate field wiring. The louvered grille is constructed of 14 gauge steel with 9 gauge trim. Heating Element A nickel chromium element is totally enclosed within a steel sheath and spiral steel fins are brazed to the element to provide excellent heat transfer. Controls & Wiring An external thermostat control (not included) is required to operate this unit. The unit is factory wired for 240/208V @ 1500/1125W operation and can be field wired to 120V @ 375W, 750W, 1125W or 1500W; 240/208V @ 750/563W. Warranty One year warranty on complete unit. CSA certified and UL approved. Accessories (field installed) Cat. No. Description FFIHAG FFIH Grille Kit (Almond) FFIHWG FFIH Grille Kit (White) TOP VIEW 402mm (15-13/16") BOTTOM VIEW FRONT VIEW (1-15/16") 49mm 372mm (14-5/8") 224mm (8-13/16") END VIEW 191mm (7-1/2") 21mm (13/16") 22mm (7/8") DIA. KNOCKOUT OUTLINE OF WIRING JUNCTION BOX 24mm (15/16") 49mm (1-15/16") 359mm (14-1/8") to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 7/8"/1-1/8" KNOCKOUT 22/29MM DIA. 181mm (7-1/8") residential heaters | 15 CXD Series Ceramic Indoor / Outdoor Radiant Heater Perfect where durable, focused heat is required. The radiant heater warms objects rather than air, making it a perfect all-season “people-heater”. Features • Two durable, ceramic elements for long lasting, radiant heat • Powder-coated steel, finished in high temperature matte black • Drip shield for outdoor use • Spectular quality reflector, electrochemically brightened aluminum Voltage 240V • Fitted element guard Wattage 2000W • 45º angle mounting bracket included Colour Black Finish Powder-coated steel, finished in high temperature matte black. Heating Element Two 1000W ceramic elements. Warranty One year warranty on complete unit. UL approved for use in Canada and the U.S. • No distracting visible light output • No glass lens to clean Applications • Patios, balconies, sunrooms, decks, garages, workshops. Specifications Dimensions FRONT VIEW SIDE VIEW 248mm (9.8") 735mm (28.9") 260mm (10.2") Ordering Guide Cat. No. Watts Volts Weight (kg/lbs.) CXD2000H-NA 2000 240 6/13.2 FTELLN-1-KIT Replacement element 260mm (10.2") TOP VIEW Warming Area 248mm (9.8") Intensity Height Throw Spread High 5.9' 5.9' 4.3' High 6.6' 6.6' 4.6' Medium 7.5' 7.2' 5.2' Low 8.2' 7.9' 5.9' Low 8.9' 8.2' 6.2' All figures are for 45º mounting angle 16 | residential HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AC Series Downflow Heater Ideal for that “Warm Welcome” above single and double doorways, and for drive-through windows. Features • Clean, space efficient design • Integral control switches • Choice of full-heat, half-heat or air only • Adjustable airflow direction • Easy multi-function installation brackets Specifications • Quiet operation Colour White Applications Construction Pressed steel case with ABS endcaps. • Hallways, entryways, drive-through windows, public washrooms & garages Heating Element Wire stitched element for instant response. Controls All models feature on-board controls. AC3N can be externally controlled. Warranty One year warranty on complete unit. CSA certified and UL approved. Ordering Guide Dimensions (W x H x D) Weight (kg/lbs.) 125 610mm x 215mm x 118mm (24.4" x 8.6" x 4.7") 5.1/11.3 240/208 200 610mm x 215mm x 118mm (24.4" x 8.6" x 4.7") 5.2/11.5 240/208 260 913mm x 215mm x 118mm fi fl (36.5" x 8.6" x 4.7") 7.2/16.0 Cat. No. Watts Volts CFM AC3N 3000/2250 240/208 AC45N 4500/3375 AC6N 6000/4500 fi fl fl fi fi fi fl fl fl 118 fl Dimensions TOP VIEW FRONT VIEW 215mm 200 (8.6") 118mm 118 (4.7") 08 01 6101100300 905 720. 7 to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 6101100200 605 423. 9 6101100100 PART NO. 787 492 605 423. 9 492 W here Us ed DIM A DIM B DIM C Referenc e Only [ mm] [ mm] [ mm] 02 03 09 residential HEATERS | 17 fl fl fi fl fl fl DCH / EMC Series Portable Construction Heater Heavy duty construction provides maximum durability for work site conditions where temporary heat is required. Features Specifications • 160 CFM delivers powerful heat output Voltage 240V Wattage 4800W Colour Almond Finish Hybrid polyester epoxy powder coat paint. Fan / Motor Fan is propeller type, accurately balanced and correctly pitched to optimize performance. Control Single pole thermostat is built-in with temperature range of 7-25ºC (45-77ºF) Warranty One year warranty on complete unit. CUL and UL approved. • Thermal overheat protection for safety • 6 foot cord with plug store around handle • Stainless steel tubular element Applications • Portable heat for workshops, garages, construction sites Dimensions 279mm (11") 3 Prong Polarized Plug 30 Amp Ordering Guide Cat. No. Watts BTU Volts CFM Weight (kg/lbs.) DCH4831A 4800 16377 240 160 4.4/9.7 184mm (7-1/4") 232mm (9-1/8") Enclosed Motor Construction Heater The enclosed motor design protects the motor from debris, extending the motor life. Specifications Features • 160 CFM delivers powerful heat output • Thermal overheat protection for safety • 6 foot cord with plug stores around handle • Stainless steel tubular element • Footstand for angled positioning Applications • Portable heat for workshops, garages, construction sites Voltage 240V Wattage 4800W Colour Yellow Finish Hybrid polyester epoxy powder coat paint. Fan / Motor Fan is propeller type accurately balanced and correctly pitched to optimize performance. Control Single pole thermostat is built-in with temperature range of 7-25ºC (45-77ºF) Warranty One year warranty on complete unit. CSA certified and UL approved. Dimensions 323mm (12.7") Ordering Guide Cat. No. Watts BTU Volts CFM Weight (kg/lbs.) EMC4240 4800 16377 240 160 4.4/9.7 3 Prong Polarized Plug 30 Amp 229mm (9") 18 | residential heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com DGWH Series Garage/Workshop Heater Tough, rugged, high performance – heats quickly. Features • Powerful fan and 4000 watt stainless steel heater element • Versatile mounting bracket attaches to wall or ceiling – heater swivels to direct heat • Automatic temperature control helps maintain consistent temperature from 7-25ºC (45-77ºF) • Powder-coated epoxy finish is long lasting and corrosion resistant • Fan delay uses residual heat for economical performance • Includes 6 foot cord with NEMA standard plug (6-20P) Specifications Voltage 240V Wattage 4000W Colour Almond Fan / Motor Fan is propeller type, accurately balanced and correctly pitched to optimize performance. Control Double pole thermostat is built-in with temperature range of 7-25ºC (45-77ºF) Warranty One year warranty on complete unit. CUL and UL approved. Applications • Portable heat for workshops, garages, construction sites Ordering Guide Cat. No. Watts BTU Volts CFM Weight (kg/lbs.) DGWH4031 4000 13,648 240 160 4.5/10 Dimensions 31 mm (1 1/4") 313 mm (12 1/2") 350 mm (14") FRONT/SIDE VIEW 350 mm (14") 275 mm (11") 225 mm (9") 181 mm (7 1/4") to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com residential HEATERS | 19 AF6 Series Architectural Draft Barrier Heater Architecturally pleasing, maintenance free solution to reducing window drafts in commercial buildings. Features • Advanced architectural, low profile styling measures 6"h x 2 1/2"w for an unobtrusive appearance • Full length thermal protection Specifications • Floating element suspension eliminates expansion noise Voltage 120, 208, 240, 277, 347, 600V – 1 phase Wattage Nine sizes ranging from 500W to 2500W • Non-corrosive, stainless steel tubular element with aluminum fins Colour Standard: White or Almond. Clear or Bronze 40 Aluminum available – consult factory. Finish Painted finish is hybrid polyester epoxy powder coat process. Clear and Bronze 40 are anodized aluminum finishes. • Built-in wireway for continuous installation Construction Front and top are constructed of extruded aluminum equivalent in strength to 14 gauge steel, with punched air intake and exhaust vents. Cabinet back and bottom are fabricated from satin coat steel with multiple knockouts for convenient power connection. Endcaps are field removable for continuous heater installation. Heating Element Stainless steel sheath encloses a nickel chromium element compacted in a mineral insulation. Aluminum fins are brazed to the surface and provide superior heat transfer. Controls & Wiring (Optional): Built-in tamperproof thermostat, or adjustable thermostat controls may be mounted in either the left or right hand terminal box. Built-in low voltage controls, if specified, are located in the right hand terminal box. Built-in disconnect switches, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater. Warranty One year warranty on complete unit. CUL and UL approved. • Choice of air intake on front or bottom Applications • Commercial, institutional, residential – offices, lobbies, meeting rooms & hallways Dimensions BACK VIEW SIDE VIEW BOTTOM VIEW (Front Inlet Version Shown) 20 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AF6 Series Product Order Logic: Catalog Number Series Inlet Options AF6 F 2 05 11 02 A1 S Order logic example Length F=Front B=Bottom Watts (ft) Voltage Finish Selection Selection Control Options Cabinet Features Ordering Guide Phase Length (mm/in.) Weight (kg/lbs.) 120, 208, 240, 277, 347 1 616 / 24 5/16 3.9 / 8.5 2559 120, 208, 240, 277, 347, 600 1 921 / 36 5/16 5.2 / 11.5 1000 3412 120, 208, 240, 277, 347, 600 1 1223 / 48 5/16 6.6 / 14.6 1250 4265 120, 208, 240, 277, 347, 600 1 1530 / 60 5/16 8.3 / 18.2 AF6F615 1500 5118 120, 208, 240, 277, 347, 600 1 1835 / 72 5/16 10 / 22 AF6F717 1750 5971 208, 240, 277, 347, 600 1 2140 / 84 5/16 11.9 / 26 AF6F820 2000 6824 208, 240, 277, 347, 600 1 2445 / 96 5/16 13.8 / 30.5 AF6F922 2250 7677 208, 240, 277, 347, 600 1 2750 / 108 5/16 16 / 35 AF6F025 2500 8530 208, 240, 277, 347, 600 1 3054 / 120 5/16 18.3 / 40 Cat. No. Watts BTU Available Voltages AF6F205 500 1706 AF6F307 750 AF6F410 AF6F512 1. Specify desired voltage, finish and control option from tables 2. For bottom inlet version replace “F” in Cat. No. with “B” 3. Endcaps are included with heaters 4. Consult factory for custom finish requirements Voltage Selection Control Options (factory installed) Code Voltage Phase Cat. No. Description 11 120 1 A1 Built-in SP tamperproof thermostat 120 - 600V 21 208 1 A2 Built-in DP tamperproof thermostat 120 - 600V 31 240 1 A4 Built-in 24V low voltage relay 120 - 600V 41 277 1 A5 Built-in 24V low voltage relay and transformer 120 - 600V 51 347 1 A8 Built-in disconnect switch, rated 277V/20A 81 600 1 B1 Built-in SP tamperproof thermostat and disconnect B2 Built-in DP tamperproof thermostat and disconnect D1 Built-in low voltage relay and disconnect D2 Built-in low voltage relay / transformer and disconnect F1 Built-in SP adjustable thermostat 120 - 600V (side mounted) F2 Built-in DP adjustable thermostat 120 - 600V (side mounted) F3 Built-in SP adjustable thermostat and disconnect F4 Built-in DP adjustable thermostat and disconnect Finish Selection Code Colour Finish 02 White Painted 68 Almond Painted 07 Bronze Anodized 10 Clear Anodized Cabinet Features Code Description W Pedestal and finished painted black S Finished painted black Note: Add “S” or “W” to the end of the Cat. No. Accessories* (field installed) Pedestal Options* Cat. No. Description Cat. No. Description ALF6IC90 Inside 90 degree corner ALPKS2 ALF6OC90 Outside 90 degree corner Pedestal kit for units up to 4' length (2 pedestals included) Filler Sections Consult factory for available sizes ALPKS3 Pedestal kit for units above 4' length (3 pedestals included) * Note: Specify “Finish Selection” code (see chart above) when ordering accessories to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com * Note: Specify “Finish Selection” code (see chart above) when ordering accessories COMMERCIAL HEATERS | 21 AS8 Series Architectural Slope Top Heater Smooth architectural lines and maintenance free construction make it the ideal choice for public areas. Features • Advanced architectural, low profile styling measures 8"h x 2 1/2"w for an unobtrusive appearance Specifications • Slope top design prevents blockage • Full length thermal protection • Floating element suspension eliminates expansion noise • Non-corrosive, stainless steel tubular element with aluminum fins • Built-in wireway for continuous installation • Choice of air intake on front or bottom Applications • Commercial, institutional, residential – offices, lobbies, meeting rooms & hallways Voltage 120, 208, 240, 277, 347, 600V – 1 phase Wattage Nine sizes ranging from 500W to 2500W Colour Standard: White or Almond. Clear or Bronze 40 Aluminum available – consult factory. Finish Painted finish is hybrid polyester epoxy powder coat process. Clear and Bronze 40 are anodized aluminum finishes. Construction Front and top are constructed of extruded aluminum equivalent in strength to 14 gauge steel, with punched air intake and exhaust vents. Cabinet back and bottom are fabricated from satin coat steel with multiple knockouts for convenient power connection. Endcaps are field removable for continuous heater installation. Heating Element Stainless steel sheath encloses a nickel chromium element compacted in a mineral insulation. Aluminum fins are brazed to the surface and provide superior heat transfer. Controls & Wiring (Optional): Built-in tamperproof thermostat, or adjustable thermostat controls may be mounted in either the left or right hand terminal box. Built-in low voltage controls, if specified, are located in the right hand terminal box. Built-in disconnect switches, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater. Warranty One year warranty on complete unit. CUL and UL approved. "L" LENGTH Dimensions BACK VIEW SIDE VIEW "L" LENGTH 190.8mm[7 1/2"] 190.8mm[7 1/2"] 19.1mm[3/4"] 19.1mm[3/4"] 50.8mm[2"] 22.2 - 28.5mm[7/8 - 1 1/8"] DIA K.O. 50.8mm[2"] 22.2 - 28.5mm[7/8 - 1 1/8"] DIA K.O. 19.1mm[3/4"] BOTTOM VIEW (Front Inlet Version Shown) 50.8mm[2"] 22.2 - 28.5mm[7/8 - 1 1/8"] DIA K.O. 50.8mm[2"] 22.2 - 28.5mm[7/8 - 1 1/8"] DIA K.O. 22.2 - 28.5mm[7/8 - 1 1/8"] 19.1mm[3/4"] DIA K.O. 22.2mm[1"] 62.7mm [2 1/2"] 22.2 - 28.5mm[7/8 - 1 1/8"] DIA K.O. 22.2mm[1"] 62.7mm [2 1/2"] (Shown without endcap, front inlet version) 28.5mm[1 1/8"] 28.5mm[1 1/8"] 127mm[5"] TERMINAL BOX 101.6mm[4"] TERMINAL BOX 127mm[5"] 101.6mm[4"] TERMINAL BOX TERMINAL BOX 22 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AS8 Series Product Order Logic: Catalog Number Series Inlet Options AS8 F 2 05 11 02 A1 S Order logic example Length F=Front B=Bottom Watts (ft) Voltage Finish Selection Selection Control Options Cabinet Features Ordering Guide Phase Length (mm/in.) Weight (kg/lbs.) 120, 208, 240, 277, 347 1 616 / 24 5/16 3.9 / 8.5 120, 208, 240, 277, 347, 600 1 921 / 36 5/16 5.2 / 11.5 Cat. No. Watts BTU Available Voltages AS8F205 500 1706 AS8F307 750 2559 AS8F410 1000 3412 120, 208, 240, 277, 347, 600 1 1223 / 48 5/16 6.6 / 14.6 AS8F512 1250 4265 120, 208, 240, 277, 347, 600 1 1530 / 60 5/16 8.3 / 18.2 AS8F615 1500 5118 120, 208, 240, 277, 347, 600 1 1835 / 72 5/16 10.0 / 22.0 AS8F717 1750 5971 208, 240, 277, 347, 600 1 2140 / 84 5/16 11.9 / 26.0 AS8F820 2000 6824 208, 240, 277, 347, 600 1 2445 / 96 5/16 13.8 / 30.5 AS8F922 2250 7677 208, 240, 277, 347, 600 1 2750 / 108 5/16 16.0 / 35.0 AS8F025 2500 8530 208, 240, 277, 347, 600 1 3054 / 120 5/16 18.3 / 40.0 1. Specify desired voltage, finish and control option from tables 2. For bottom inlet version replace “F” in Cat. No. with “B” 3. Endcaps are included with heaters 4. Consult factory for custom finish requirements Control Options (factory installed) Voltage Selection Code Voltage Phase Cat. No. Description 11 120 1 A1 Built-in SP tamperproof thermostat 120 - 600V 21 208 1 A2 Built-in DP tamperproof thermostat 120 - 600V 31 240 1 A4 Built-in 24V low voltage relay 120 - 600V 41 277 1 A5 Built-in 24V low voltage relay and transformer 120 - 600V 51 347 1 A8 Built-in disconnect switch, rated 277V/20A 81 600 1 B1 Built-in SP tamperproof thermostat and disconnect B2 Built-in DP tamperproof thermostat and disconnect D1 Built-in low voltage relay and disconnect D2 Built-in low voltage relay / transformer and disconnect F1 Built-in SP adjustable thermostat 120 - 600V (side mounted) F2 Built-in DP adjustable thermostat 120 - 600V (side mounted) F3 Built-in SP adjustable thermostat and disconnect F4 Built-in DP adjustable thermostat and disconnect Finish Selection Code Colour Finish 02 White Painted 68 Almond Painted 07 Bronze Anodized 10 Clear Anodized Cabinet Features Code Description W Pedestal and finished painted black S Finished painted black Note: Add “S” or “W” to the end of the Cat. No. Accessories* (field installed) Pedestal Options* Cat. No. Description Cat. No. Description ALS8IC90 Inside 90 degree corner ALPKS2 ALS8OC90 Outside 90 degree corner Pedestal kit for units up to 4' length (2 pedestals included) Filler Sections Consult factory for available sizes ALPKS3 Pedestal kit for units above 4' length (3 pedestals included) * Note: Specify “Finish Selection” code (see chart above) when ordering accessories to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com * Note: Specify “Finish Selection” code (see chart above) when ordering accessories COMMERCIAL HEATERS | 23 AF12 Series Architectural Convection Heater Heavy duty design and maintenance free construction combined with a high BTU output for quiet convection operation. Features • Advanced architectural styling with an unobtrusive profile that measures 12"h x 5 3/4"w • Full length thermal protection • Floating element suspension eliminates expansion noise • Non-corrosive, stainless steel tubular element with aluminum fins • Built-in wireway for continuous installation • Choice of air intake on front or bottom Specifications Voltage 208, 240, 277, 347, 480, 600V – 1/3 phase Wattage Nine sizes ranging from 1125W to 6000W Colour Standard: White or Almond. Clear or Bronze 40 Aluminum available – consult factory. Finish Painted finish is hybrid polyester epoxy powder coat process. Clear and Bronze 40 are anodized aluminum finishes. Construction Front and top are constructed of extruded aluminum equivalent in strength to 14 gauge steel, with punched air intake and exhaust vents. Cabinet back and bottom are fabricated from satin coat steel with multiple knockouts for convenient power connection. Endcaps are field removable for continuous heater installation. Heating Element Stainless steel sheath encloses a nickel chromium element compacted in a mineral insulation. Aluminum fins are brazed to the surface and provide superior heat transfer. Controls & Wiring (Optional): Built-in tamperproof thermostat, or adjustable thermostat controls may be mounted in either the left or right hand terminal box. Built-in low voltage controls, if specified, are located in the right hand terminal box. Built-in disconnect switches, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater. Warranty One year warranty on complete unit. CUL and UL approved. Applications • Commercial, institutional, classrooms, meeting rooms, auditoriums, churches & hospitals Dimensions BACK VIEW SIDE VIEW (Less End Cap) BOTTOM VIEW (Front Inlet Version Shown) 24 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AF12 Series Product Order Logic: Catalog Number Order logic example Series Inlet F=Front B=Bottom Options AF12 F 2 15 21 02 A9 S Length Watts (ft) Voltage Finish Selection Selection Control Options Cabinet Features Ordering Guide Available Voltages Cat. No. Watts BTU 1 Phase 3 Phase 208, 240, 277, 347, 600 208, 480, 600 Length (mm/in.) Weight (kg/lbs.) 617 / 24 5/16 10.5 / 23 Standard Density 750 Watts per foot AF12F215 1500 5118 AF12F430 3000 10236 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 16.0 / 35 AF12F645 4500 15354 208, 240, 277, 347, 600 208, 480, 600 1836 / 72 5/16 21.6 / 48 AF12F860 6000 20472 208, 240, 277, 347, 600 208, 480, 600 2446 / 96 5/16 27.0 / 60 Low Density 562 Watts per foot AF12F211 1125 3838 208, 240, 277, 347, 600 208 617 / 24 5/16 10.5 / 23 AF12F316 1687 5756 208, 240, 277, 347, 600 208, 480, 600 922 / 36 5/16 13.3 / 29 AF12F422 2250 7677 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 16.0 / 35 AF12F633 3375 11515 208, 240, 277,347, 600 208, 480, 600 1836 / 72 5/16 21.6 / 48 AF12F845 4500 15354 208, 240, 277, 347, 600 208, 480, 600 2446 / 96 5/16 27.0 / 60 1. Specify desired voltage, finish and control option from tables 2. For bottom inlet version replace “F” in Cat. No. with “B” Voltage Selection Code 21 23 31 41 51 73 81 83 Voltage 208 208 240 277 347 480 600 600 Control Options (factory installed) Phase 1 3 1 1 1 3 1 3 Finish Selection Code 02 68 07 10 Colour White Almond Bronze Clear 3. Endcaps are included with heaters 4. Consult factory for custom finish requirements Finish Painted Painted Anodized Anodized Cat. No. Description A3 Built-in SP tamperproof hydraulic thermostat for 3 phase 208 - 600V A4 Built-in 24V low voltage relay for 1 phase 208 - 600V A5 Built-in 24V low voltage relay and transformer for 1 phase 208 - 600V A6 Built-in 24V contactor less transformer for 3 phase 208 - 600V A7 Built-in 24V contactor and transformer for 3 phase 208 - 600V A8 Built-in disconnect switch, rated 600V/50A A9 Built-in DP tamperproof hydraulic thermostat 208 - 600V B3 Built-in SP tamperproof thermostat and disconnect B9 Built-in DP tamperproof thermostat and disconnect Accessories* (field installed) Pedestal Options* Cat. No. Description Cat. No. Description ALF12IC90 Inside 90 degree corner ALPKM2 Cabinet Features ALF12OC90 Outside 90 degree corner Pedestal kit for units up to 4' length (2 pedestals included) Filler Sections Consult factory for available sizes ALPKM3 Code Description W Pedestal and finished painted back S Finished painted back Note: Add “S” or “W” to the end of the Cat. No. * Note: Specify “Finish Selection” code (see chart above) when ordering accessories Pedestal kit for units above 4' length (3 pedestals included) to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com * Note: Specify “Finish Selection” code (see chart above) when ordering accessories COMMERCIAL HEATERS | 25 AS12 Series Architectural Slope Top Heater Heavy duty slope top design and higher heat output are ideal for larger public areas. Features • Advanced architectural slope top design prevents blockage • Profile measures 12"h x 5 3/4"w for an unobtrusive appearance • Full length thermal protection • Floating element suspension eliminates expansion noise • Non-corrosive, stainless steel tubular element with aluminum fins • Built-in wireway for continuous installation Specifications Voltage 208, 240, 277, 347, 480, 600V – 1/3 phase Wattage Nine sizes ranging from 1125W to 6000W Colour Standard: White or Almond. Clear or Bronze 40 Aluminum available – consult factory. Finish Painted finish is hybrid polyester epoxy powder coat process. Clear and Bronze 40 are anodized aluminum finishes. Construction Front and top are constructed of extruded aluminum equivalent in strength to 14 gauge steel, with punched air intake and exhaust vents. Cabinet back and bottom are fabricated from satin coat steel with multiple knockouts for convenient power connection. Endcaps are field removable for continuous heater installation. Heating Element Stainless steel sheath encloses a nickel chromium element compacted in a mineral insulation. Aluminum fins are brazed to the surface and provide superior heat transfer. Controls & Wiring (Optional): Built-in tamperproof thermostat, or adjustable thermostat controls may be mounted in either the left or right hand terminal box. Built-in low voltage controls, if specified, are located in the right hand terminal box. Built-in disconnect switches, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater. Warranty One year warranty on complete unit. CUL and UL approved. • Choice of air intake on front or bottom Applications • Commercial, institutional, schools, public offices, banks and sports facilities Dimensions BACK VIEW SIDE VIEW (Less End Cap) BOTTOM VIEW (Front Inlet Version Shown) 26 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AS12 Series Product Order Logic: Catalog Number Order logic example Series Inlet Options AS12 F 2 15 21 02 A9 S Length F=Front B=Bottom Watts (ft) Voltage Finish Selection Selection Control Options Cabinet Features Ordering Guide Available Voltages Cat. No. Watts BTU 1 Phase 3 Phase 208, 240, 277, 347, 600 208, 480, 600 Length (mm/in.) Weight (kg/lbs.) 617 / 24 5/16 10.5 / 23 Standard Density 750 Watts per foot AS12F215 1500 5118 AS12F430 3000 10236 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 16.0 / 35 AS12F645 4500 15354 208, 240, 277, 347, 600 208, 480, 600 1836 / 72 5/16 21.6 / 48 AS12F860 6000 20472 208, 240, 277, 347, 600 208, 480, 600 2446 / 96 5/16 27.0 / 60 Low Density 562 Watts per foot AS12F211 1125 3838 208, 240, 277, 347, 600 208 617 / 24 5/16 10.5 / 23 AS12F316 1687 5756 208, 240, 277, 347, 600 208, 480, 600 922 / 36 5/16 13.3 / 29 AS12F422 2250 7677 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 16.0 / 35 AS12F633 3375 11515 208, 240, 277, 347, 600 208, 480, 600 1836 / 72 5/16 21.6 / 48 AS12F845 4500 15354 208, 240, 277, 347, 600 208, 480, 600 2446 / 96 5/16 27.0 / 60 1. Specify desired voltage, finish and control option from tables 2. For bottom inlet version replace “F” in Cat. No. with “B” Voltage Selection Code 21 23 31 41 51 73 81 83 Voltage 208 208 240 277 347 480 600 600 Control Options (factory installed) Phase 1 3 1 1 1 3 1 3 Finish Selection Code 02 68 07 10 Colour White Almond Bronze Clear 3. Endcaps are included with heaters 4. Consult factory for custom finish requirements Finish Painted Painted Anodized Anodized Cabinet Features Code Description W Pedestal and finished painted back S Finished painted back Note: Add “S” or “W” to the end of the Cat. No. Cat. No. Description A3 Built-in SP tamperproof hydraulic thermostat for 3 phase 208 - 600V A4 Built-in 24V low voltage relay for 1 phase 208 - 600V A5 Built-in 24V low voltage relay and transformer for 1 phase 208 - 600V A6 Built-in 24V contactor less transformer for 3 phase 208 - 600V A7 Built-in 24V contactor and transformer for 3 phase 208 - 600V A8 Built-in disconnect switch, rated 600V/50A A9 Built-in DP tamperproof hydraulic thermostat 208 - 600V B3 Built-in SP tamperproof thermostat and disconnect B9 Built-in DP tamperproof thermostat and disconnect Accessories* (field installed) Pedestal Options* Cat. No. Description Cat. No. Description ALS12IC90 Inside 90 degree corner ALPKM2 ALS12OC90 Outside 90 degree corner Pedestal kit for units up to 4' length (2 pedestals included) Filler Sections Consult factory for available sizes ALPKM3 Pedestal kit for units above 4' length (3 pedestals included) * Note: Specify “Finish Selection” code (see chart above) when ordering accessories to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com * Note: Specify “Finish Selection” code (see chart above) when ordering accessories COMMERCIAL HEATERS | 27 AF20 Series Architectural Convection Heater Heavy duty architectural design and high heat output are perfect for large commercial spaces where quiet natural convection performance is required. Features • Advanced architectural styling • Profile measures 20"h x 5 3/4"w for an unobtrusive appearance • Full length thermal protection Specifications • Floating element suspension eliminates expansion noise Voltage 208, 240, 277, 347, 480, 600V – 1/3 phase Wattage Eight sizes ranging from 1500W to 6000W Colour Standard: White or Almond. Clear or Bronze 40 Aluminum available – consult factory. Finish Painted finish is hybrid polyester epoxy powder coat process. Clear and Bronze 40 are anodized aluminum finishes. Construction Front and top are constructed of extruded aluminum equivalent in strength to 14 gauge steel, with punched air intake and exhaust vents. Cabinet back and bottom are fabricated from satin coat steel with multiple knockouts for convenient power connection. Endcaps are field removable for continuous heater installation. Heating Element Stainless steel sheath encloses a nickel chromium element compacted in a mineral insulation. Aluminum fins are brazed to the surface and provide superior heat transfer. Controls & Wiring (Optional): Built-in tamperproof thermostat, or adjustable thermostat controls may be mounted in either the left or right hand terminal box. Built-in low voltage controls, if specified, are located in the right hand terminal box. Built-in disconnect switches, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater. Warranty One year warranty on complete unit. CUL and UL approved. • Non-corrosive, stainless steel tubular element with aluminum fins • Front air intake, front air exhaust • May be partially or fully recessed Applications • Commercial, institutional, meeting rooms, schools, churches, auditoriums, hospitals Dimensions 25.4mm[1"] BACK VIEW SIDE VIEW (Less Endcap) BOTTOM VIEW 25.4mm[1"] 28 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com AF20 Series Product Order Logic: Catalog Number Series Options AF20 2 20 21 02 A9 Order logic example Length Watts (ft) Voltage Selection Finish Selection Control Options Ordering Guide Available Voltages Cat. No. Watts BTU 1 Phase 3 Phase 208, 240, 277, 347, 600 208, 480 Length (mm/in.) Weight (kg/lbs.) 617 / 24 1/3 17.7 / 39 Standard Density 1000 Watts per foot AF20220 2000 6824 AF20330 3000 10236 208, 240, 277, 347, 600 208, 480, 600 922 / 36 5/16 24.0 / 53 AF20440 4000 13648 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 29.3 / 64.5 AF20550 5000 17060 208, 240, 277, 347, 600 208, 480, 600 1532 / 60 5/16 35.0 / 77.3 AF20660 6000 20472 208, 240, 277, 347, 600 208, 480, 600 1836 / 72 5/16 41.0 / 90 Low Density 750 Watts per foot AF20215 1500 5118 208, 240, 277, 347, 600 208, 480, 600 617 / 24 1/3 17.7 / 39 AF20430 3000 10236 208, 240, 277, 347, 600 208, 480, 600 1227 / 48 5/16 29.3 / 64.5 AF20645 4500 15354 208, 240, 277, 347, 600 208, 480, 600 1836 / 72 5/16 41.0 / 90 1. Specify desired voltage, finish and control option from tables 2. For bottom inlet version replace “F” in Cat. No. with “B” 3. Endcaps are included with heaters 4. Consult factory for custom finish requirements Voltage Selection Control Options (factory installed) Code Voltage Phase Cat. No. Description 21 208 1 A3 Built-in SP tamperproof hydraulic thermostat for 3 phase 208 - 600V 23 208 3 A4 Built-in 24V low voltage relay for 1 phase 208 - 600V 31 240 1 A5 Built-in 24V low voltage relay and transformer for 1 phase 208 - 600V 41 277 1 A6 Built-in 24V contactor less transformer for 3 phase 208 - 600V 51 347 1 A7 Built-in 24V contactor and transformer for 3 phase 208 - 600V 73 480 3 A8 Built-in disconnect switch, rated 600V/50A 81 600 1 A9 Built-in DP tamperproof hydraulic thermostat 208 - 600V 83 600 3 B3 Built-in SP tamperproof thermostat and disconnect B9 Built-in DP tamperproof thermostat and disconnect Finish Selection Accessories* (field installed) Code Colour Finish 02 White Painted Cat. No. Description 68 Almond Painted ALTB Trim Bar for recess mounting 07 Bronze Anodized 10 Clear Anodized * Note: Must add length required Example – A L T B 2 0 2 = 2 foot long, white finish Length in feet Finish Selection (Colour) to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com COMMERCIAL HEATERS | 29 CH Series Cabinet Console Heater Provides rapid, even fan-forced heat on demand in a variety of airflow options. Features • Architectural style bar grilles can be field relocated for top/bottom inlet/outlet arrangements • Direct drive blower wheel connection • Thermal limit switch for safety shut-off • Time delay relay utilizes residual heat before shut-off • Flexible mounting options Applications • Reception areas, lobbies, corridors, entranceways, stairways and offices Specifications Voltage 208, 240, 277, 347, 480, 600V – 1/3 Phase Wattage Ten sizes ranging from 2 to 18 kW Airflow 32" unit – 250/200 CFM, 45" unit – 500/400 CFM and 65" unit – 750/600 CFM Colour White and Almond Finish Polyester powder coat finish. Construction All panels are fabricated with 16 gauge steel. Cabinet grilles can be field relocated and are shipped standard as front inlet / front outlet. Heating Element Spiral fins provide maximum heating surface and maximum heat transfer at a safe temperature level. Overheat protection is provided by means of a linear type thermal limit switch. Controls The heater is available with a choice of control combinations to provide flexibility of operation in various applications. All controls have a twoposition rotary switch for HIGH & LOW heat and blower output. Specify one of the following controls when ordering: 3: This option is automatically controlled by its own built-in thermostat with a range of 7º to 32ºC (45º to 90ºF). A 3 push button (“OFF, HEAT and FAN”) is also featured. R: This option provides a built-in relay for use with a remote control. 240V or 208V is provided from unit itself to the control. T: This option has provisions for an external 24 volt room thermostat, with 24 volt power provided internally. Fan & Motor All motors are resilient mounted and have built-in automatic reset thermal overload protection. Motors have plug-in electrical connection for ease of service. Motor and blowers are mounted as a single assembly with direct-drive connection on a rigid heavy-gauge frame to prevent vibration. The blow-through design assures quiet operation and provides maximum cooling for the blower motor. Warranty One year warranty on complete unit. CSA certified and UL approved. Accessories Cat. No. Description PWF32 Permanent washable filter for 812mm/32" cabinets PWF45 Permanent washable filter for 1143mm/45" cabinets PWF65 Permanent washable filter for 1651mm/65" cabinets TF32 Trim frame for recess mounting of 812mm/32" cabinets TF45 Trim frame for recess mounting of 1143mm/45" cabinets TF65 Trim frame for recess mounting of 1651mm/65" cabinets Note: Trim frames are Almond – To order White add “W” at end of Catalogue No. 30 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com CH Series Product Order Logic: Catalog Number Order logic example Series Watts Options CH3D 04 A 3 W Voltage Selection Control Options Colour Options Ordering Guide Cat. No. Watts BTU Available Voltages CFM Length (mm/in.) Weight (kg/lbs.) CH3D02 2000 6840 A,B,C,D,E,F,G,H,I,J 250 / 200 812.8 / 32 50.0 / 110 CH3D03 3000 10260 A,B,C,D,E,F,G,H,I,J 250 / 200 812.8 / 32 50.0 / 110 CH3D04 4000 13700 A,B,C,D,E,F,G,H,I,J 250 / 200 812.8 / 32 50.0 / 110 CH3D05 5000 17100 A,B,C,D,E,F,G,H,I,J 250 / 200 812.8 / 32 50.0 / 110 CH3D06 6000 20500 A,B,C,D,E,F,G,H,I,J 250 / 200 812.8 / 32 50.0 / 110 CH4D04 4000 13700 A,B,C,D,E,F,G,H,I,J 500 / 400 1143 / 45 67.4 / 145 CH4D06 6000 20500 A,B,C,D,E,F,G,H,I,J 500 / 400 1143 / 45 67.4 / 145 CH4D08 8000 27300 A,B,C,D,E,F,G,H,I,J 500 / 400 1143 / 45 67.4 / 145 CH4D10 10000 34120 A,B,C,D,E,F,G,H,I,J 500 / 400 1143 / 45 67.4 / 145 CH4D12 12000 41000 D,E, F, G,H,J 500 / 400 1143 / 45 67.4 / 145 CH6D15 15000 51180 D,F,J 750 / 600 1651 / 65 112.0 / 240 CH6D18 18000 61416 D,F,J 750 / 600 1651 / 65 112.0 / 240 1. Specify desired voltage and control option at time of ordering – example: CH4D04A3 2. Standard colour is Almond – To order White add “W” at end of Cat. No. Voltage Selection Code Voltage 3. Consult factory for custom finish requirements 4. Must be specified with at least one control option. Multiple control options available. Control Options (factory installed) Phase Code Voltage Phase Code Description 480 3 A 208 1 F 3 Built-in single pole thermostat, high/low control switch for heat/fan, on/off control switch B 240 1 G 480 1 C Duct transition collar for connection to ducting C 277 1 H 347 1 R D 208 3 I 600 1 Provision for remote wired control (not included), high/low control switch for heat/fan. Control circuits are 240V on all units except 208V which has control voltage the same as supply voltage. E 240 3 J 600 3 S Disconnect switch for positive power interruption T Built-in voltage relay kit for remote 24V thermostat (not included), high/low control switch for heat/fan X High speed motor for ceiling mount applications Dimensions FRONT VIEW "L" 813, 1143, 1651 (32", 45", 65") R.H. VIEW NOTE CEILING MOUNTING HOLES ARE SHOWN AS VIEWED FROM FRONT OF HEATER UNIT "X" 32" 15" (381mm) 45" 29" (737mm) 65" 49" (1245mm) BOTTOM VIEW to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com COMMERCIAL HEATERS | 31 RFI / RFV / RFF Series Commercial Fan-Forced Heater Solutions for maintaining comfort in areas subject to cold drafts, such as vestibules, stairwells, etc. RFI Series RFF Series Available in Canada only Features • Quick response, high output fan-forced heater • Automatic fan delay utilizes residual heat when unit cycles off • All models offer recessed or surface mounting, ceiling or wall RFITF T-bar Ceiling Mount Trim (white only) RFV Series Available in Canada only Specifications Voltage 208, 240, 277, 347, 600V Wattage Nine sizes ranging from 1125W to 8000W Colour Almond or White Finish Polyester epoxy powder coat painted finish. Construction • Includes built-in double pole thermostat The front panel is constructed of 20 gauge steel. The recess box is designed for recessing into either frame or masonry walls or ceilings and contains knockouts for wiring connections. Heating Element • Access door can be locked for tamperproof applications The RFI/RFV/RFF wall heater has a nickel chromium resistance wire heating element within a steel sheath. Spiral steel fins are firmly brazed to the surface to provide excellent heat transfer. Motor & Fan The fan motor is totally enclosed and factory lubricated complete with a black anodized 5 blade mixed flow aluminum fan. The fan delay is a bi-metallic snap action type. Controls & Wiring 208V, 240V and 277V units have a standard double pole built-in thermostat with provision for a remote wall stat if required. 347V and 600V units have a built-in thermostat. Use low voltage relay kits and suitable wall mount thermostat for remote temperature control. Warranty One year warranty on complete unit. CSA certified and UL approved. • 50/60 cycle rating • Exclusive aesthetically pleasing front panel trim Applications • Vestibules, entranceways, stairwells, kiosks 32 | COMMERCIAL HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com RFI / RFV / RFF Series Ordering Guide Phase CFM Weight (kg/lbs.) Cat. No. 240/208 1 160 12.7/28 6824/5118 240/208 1 160 6824 277 1 160 3000/2250 10236/7680 240/208 1 RFI830D41-KIT 3000 10236 277 RFI840D21-KIT 4000 13648 RFI840D31-KIT 4000/3000 RFI840D41-KIT RFI848D31-KIT Watts BTU Volts Phase CFM Weight (kg/lbs.) RFV831551-KIT† 3000/1500 10236/5118 347 1 160 16.0/34 12.7/28 RFV831581-KIT 3000/1500 10236/5118 600 1 160 16.0/34 12.7/28 RFV842051-KIT 4000/2000 13684/6824 347 1 160 16.0/34 160 12.7/28 RFV842081-KIT 4000/2000 13684/6824 600 1 160 16.0/34 1 160 12.7/28 RFF86021-KIT† 6000 20472 208 1 320 30/65 208 1 160 12.7/28 RFF86031-KIT† 6000 20472 240 1 320 30/65 13648/10236 240/208 1 160 12.7/28 RFF86051-KIT 6000 20472 347 1 320 36/80 4000 13648 277 1 160 12.7/28 RFF86081-KIT 6000 20472 600 1 320 36/80 4800/3600 16378/12283 240/208 1 160 12.7/28 † RFF88021-KIT 8000 27296 208 1 320 30/65 RFF88031-KIT† 8000 27296 240 1 320 30/65 RFF88051-KIT† 8000 27296 347 1 320 36/80 RFF88081-KIT 8000 27296 600 1 320 36/80 Cat. No. Watts BTU Volts RFI815D31-KIT 1500/1125 5118/3840 RFI820D31-KIT 2000/1500 RFI820D41-KIT 2000 RFI830D31-KIT Note: 1) Standard colour is Almond. 2) To order White add “W” to Cat. No. before “KIT” (Example RFI815D31W-KIT) † † † † † † † RFV / RFF models – available in Canada only Control Accessory Kits (field installed) Accessories (field installed) Cat. No. Description Cat. No. Description RFFLVC21 208V low volt relay w/24V transformer kit for RFF RFAD Disconnect switch rated for 277V RFFLVC31 240V low volt relay w/24V transformer kit for RFF RFFP8CA RFFLVC41 277V 22A low volt relay w/ 24V transformer kit for RFI Surface mount box for RFF series (almond) 32.8" x 21.5" x 3.8" (832mm x 546mm x 97mm) RFFLVC51 347V low volt relay w/24V transformer kit for RFF RFFP8CW RFFLVC81 600V low volt relay w/24V transformer kit for RFF Surface mount box for RFF series (white) 32.8" x 21.5" x 3.8" (832mm x 546mm x 97mm) RFFLVD 208-600V low volt relay kit only for RFF series RFIBGA Tamperproof bar grille (almond) RFLVC21 208V 22A low volt relay w/ 24V transformer kit for RFI RFIBGW Tamperproof bar grille (white) RFLVC31 240V 22A low volt relay w/ 24V transformer kit for RFI RFIFPA RFI Front panel kit (almond) RFLVC41 240V low volt relay and transformer kit for RFI RFIFPW RFI Front panel kit (white) RFLVD 208-240V low volt relay kit only for RFI series RFITF T-Bar ceiling frame for RFI/RFV series (white only) RFVLVC51 347V low volt relay w/ 24V transformer kit for RFV series RFP8DA Surface mount box for RFI/RFV series (almond) 16.8" x 21.5" x 3.8" (425mm x 546mm x 97mm) RFVLVC81 600V low volt relay w/ 24V transformer kit for RFV series RFP8DW RFVLVD 347-600V low volt relay kit only for RFV series Surface mount box for RFI/RFV series (white) 16.8" x 21.5" x 3.8" (425mm x 546mm x 97mm) Dimensions BACK VIEW TOP VIEW TOP VIEW SIDE VIEW RFI/RFV SIDE VIEW to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com RFF COMMERCIAL HEATERS | 33 EWA Series Commercial Fan-Forced Heater Engineered for outstanding performance and dependable service. Features • Built-in DPST thermostat with on/off rocker switches for easier control Exclusive Cast Aluminum Element Design • Terminal block provided for connection to optional remote line voltage thermostat • Fan size and pitch are matched to the motor for smooth, quiet operation • Exclusive rust free cast aluminum heating grid provides superior performance and stores energy longer by acting as a heat bank • Operates at a lower temperature than any other heating element on the market Applications • Offices, reception rooms, entranceways, stairways Specifications Voltage 120, 208, 240, 277V Wattage Five sizes ranging from 1000W to 4000W Airflow 50 CFM – 1000, 1500, 2000W. 100 CFM – 3000, 4000W Colour Almond Finish Polyester epoxy powder coat finish. Construction Units are fan type and utilize the “Down Flow” principle of heated air delivery. Designed for recessed mounting within standard 16" stud centers and wall thickness. Rugged 20 gauge steel construction. Heating Grid The cast aluminum heating grid contains a nickel chromium resistance wire which is insulated in magnesium oxide and sheathed in a protective tubular stainless steel sheath. The entire tube is completely cast into an aluminum molded form, deeply embedded and completely safe. The finned design increases the heat radiating surface of the grid, giving wider distribution of heat at a safer, lower temperature than the heating element of any other wall heater. Controls A precision snap action hydraulic thermostat is included for positive temperature control when the rocker switch is in the ON position. The hydraulic capillary sensing element is located in the room inlet air stream to provide accurate temperature. The thermostat ranges from 4ºC/40ºF (low) to 38ºC/100ºF (high). Warranty One year warranty on complete unit. CSA certified and UL approved. 34 | commercial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com EWA Series Ordering Guide Cat. No. Watts BTU Volts Phase CFM Weight (kg/lbs.) Cat. No. Watts BTU Volts Phase CFM Weight (kg/lbs.) EWA10C11 1000 3412 120 1 50 8.2/18 EWA20C21 2000 6824 208 1 50 8.2/18 EWA10C21 1000 3412 208 1 50 8.2/18 EWA20C31 2000 6824 240 1 50 8.2/18 EWA10C31 1000 3412 240 1 50 8.2/18 EWA20C41 2000 6824 277 1 50 8.2/18 EWA10C41 1000 3412 277 1 50 8.2/18 EWA30C21 3000 10236 208 1 100 13.6/30 EWA15C11 1500 5118 120 1 50 8.2/18 EWA30C31 3000 10236 240 1 100 13.6/30 EWA15C21 1500 5118 208 1 50 8.2/18 EWA30C41 3000 10236 277 1 100 13.6/30 EWA15C31 1500 5118 240 1 50 8.2/18 EWA40C21 4000 13648 208 1 100 13.6/30 EWA15C41 1500 5118 277 1 50 8.2/18 EWA40C31 4000 13648 240 1 100 13.6/30 EWA40C41 4000 13648 277 1 100 13.6/30 Accessories (field installed) Cat. No. Description Cat. No. Description 8754 Surface mounting box for 1000, 1500 & 2000W units. 13.25" x 16.5" x 4.1" (337mm x 418mm x 103mm) TGKSB Tamperproof grille kit for 1000, 1500 & 2000W units TGKLB Tamperproof grille kit for 3000 & 4000W units 8753 Surface mounting box for 3000 & 4000W units. 16.5" x 21.25" x 4.1" (418mm x 540mm x 103mm) Dimensions TOP VIEW 3000 - 4000 W TOP VIEW SIDE VIEW to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 1000 - 2000 W SIDE VIEW commercial heaters | 35 BLAST Series Commercial Hand Dryer Cast iron construction for compact, modern design with unsurpassed drying speed and long lasting durability. Environmentally friendly, using less than 1/6 of the energy of conventional hand dryers. Features • Automatic infrared actuated sensor, for power conservation and maximum hygiene • Robust, tamperproof design and construction for greater product durability and longevity in application • High velocity (275 CFM) airflow for ultra high speed hand drying • Automatic voltage switching for ease of installation • Contributes to LEED and BOMA building certification • Designed for easy installation Applications • Washrooms and clean up areas, commercial facilities, factories, restaurants and hospitals Specifications Voltage Universal 115-230*VAC (*50/60Hz) Wattage 1450W at 6.3A (230VAC) Colour White, Black and Gray Finish Porcelain enamel. Heating Element 725W resistance coil. Construction Material Cast iron. Controls & Wiring Automatic resetting thermostat with cutout when airflow is restricted. Infrared sensor cutout two seconds after hand removal, and 60 seconds after initiating drying. Installation Removable predrilled baseplate for easy mounting. Warranty 10 years parts and labor. CSA certified for use in Canada and the U.S. CE approved for use where applicable. Dimensions BACK VIEW Ordering Guide (4)1/4˝ 6mm HOLES SIDE VIEW 10-3/4˝ - 277mm 7-3/8˝ - 187mm 1-1/2˝ 38mm 2˝ - 50mm 7/8˝ - 22mm KNOCKOUT 4-5/8˝ - 117mm 9-5/8˝ - 244mm 6-5/8˝ - 168mm Air Volume CFM Noise dB Dimensions (W x H x D) (mm/in.) Weight (kg/lbs.) 115-230, 19,000 50-60 275 78 244 x 277 x 168 (9.625 x 10.75 x 6.625) 11/24 1450 115-230, 19,000 50-60 275 78 244 x 277 x 168 (9.625 x 10.75 x 6.625) 11/24 1450 115-230, 19,000 50-60 275 78 244 x 277 x 168 (9.625 x 10.75 x 6.625) 11/24 Cat. No. Colour Watts DC20001WH White 1450 DC20002BK Black DC20003GR Gray Volts Hz Air Velocity LFM 36 | COMMERCIAL heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 6-7/8˝ - 175mm ONE Series Commercial Hand Dryer Top quality construction combines elegance with high performance. Ultra-quiet, quick drying and low cost of ownership. Features • Automatic infrared actuated sensor, for power conservation and maximum hygiene • Robust, tamperproof design and construction for greater product durability and longevity in application • Quietest hand dryer in the industry at 55dB • High velocity (150 CFM) airflow for faster hand drying • Modular design for easy repair • Automatic voltage switching for ease of installation • Contributes to LEED and BOMA building certification • Designed for easy installation Applications • Washrooms and clean up areas, commercial facilities, factories, restaurants and hospitals (4)1/4˝ 6mm HOLES 10-3/4˝ - 277mm 1-1/2˝ 38mm 2˝ - 50mm 7/8˝ - 22mm KNOCKOUT 7-3/8˝ - 187mm 4-5/8˝ - 117mm Dimensions 9-5/8˝ - 244mm Voltage Universal 115-230*VAC (*50/60Hz) Wattage 1450W at 6.3A (230VAC) Colour White, Black and Stainless Finish Chrome, scratch-resistant porcelain, brushed stainless steel. Heating Element 1380W resistance coil. Construction Material Cast zinc and steel. Controls & Wiring Automatic resetting thermostat with cutout when airflow is restricted. Infrared sensor cutout two seconds after hand removal, and 60 seconds after initiating drying. Installation Removable predrilled baseplate for easy mounting. Warranty 10 years parts and labor. CSA certified for use in Canada and the U.S. CE approved for use where applicable. 6-5/8˝ - 168mm SIDE VIEW BACK VIEW Ordering Guide 2-1/2˝ - 64mm 1-3/4˝ 44mm 7/8˝ - 22mm KNOCKOUT 7-3/4˝ - 197mm (4)1/4˝ - 6mm DIA. HOLES 2-5/8˝ 67mm 4-3/4˝ - 121mm 13-3/4˝ - 349mm 6-7/8˝ - 175mm 4˝ - 100mm Specifications 10-3/8˝ - 263mm Cat. No. Colour Wattage Watts Volts Hz Air Volume CFM Noise dB Dimensions (W x H x D) (mm/in.) Weight (kg/lbs.) D20001WH White 1450 115-230, 50-60 150 55 263 x 349 x 100 (10.375 x 13.75 x 4) 9/20 D20002BK Black 1450 115-230, 50-60 150 55 263 x 349 x 100 (10.375 x 13.75 x 4) 9/20 D20003SS Stainless 1450 115-230, 50-60 150 55 263 x 349 x 100 (10.375 x 13.75 x 4) 9/20 to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com COMMERCIAL HEATERS | 37 VUB Series Vertical Unit Heater Directs large volumes of warm air downward which makes this product the ideal choice for high bay heating applications. Also suitable as entryway air curtain heating in areas subject to high heat loss. Features • Specially formed concentric finned elements yield maximum heat transfer • Fan only operation circulates ceiling level heat • Choice of diffusers for various airflow options Applications • High bay buildings, shipping areas, warehouses, garages, shopping center entrances Available in Canada only Specifications Voltage 208, 240, 600V Wattage Nine sizes ranging from 5 to 50kW Colour Almond Finish Cabinet is coated with a hybrid polyester epoxy powder coat paint. Fan & Motor The motor is a heavy duty permanently lubricated ball bearing type mounted on resilient base to absorb vibration. The fan is a propeller type, accurately balanced and correctly pitched for each individual unit. Controls 240V contactor with transformer (if required) included. Heating Element The heating element has a totally enclosed nickel chromium resistance element within steel sheathing, brazed with spiral steel fins for maximum heat transfer. Warranty One year warranty on unit. CSA approved. Control Options (field installed) Accessories (field installed) Cat. No. Description Cat. No. Description TS521W Single pole remote mount wall thermostat VUBCD1E Single cone diffuser for 5–25kW units VUBH31E Three cone diffuser for 5–25kW units VUBCD2E Single cone diffuser for 30–50kW units VUBH32E Three cone diffuser for 30–50kW units 38 | INDUSTRIAL heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com VUB Series Ordering Guide Cat. No. kW BTU Volts Phase CFM Weight (kg/lbs.) VUB105E23 5 17060 208 3 940 29.5/65 VUB105E31 5 17060 240 1 940 29.5/65 VUB105E83 5 17060 600 3 940 29.5/65 VUB108E23 7.5 25590 208 3 940 29.5/65 VUB108E31 7.5 25590 240 1 940 29.5/65 VUB108E83 7.5 25590 600 3 940 29.5/65 VUB110E23 10 34120 208 3 940 29.5/65 VUB110E31 10 34120 240 1 940 29.5/65 VUB110E83 10 34120 600 3 940 29.5/65 VUB115E23 15 51180 208 3 960 29.5/65 VUB115E83 15 51180 600 3 960 29.5/65 VUB120E83 20 68240 600 3 960 29.5/65 VUB125E83 25 85300 600 3 960 29.5/65 VUB230E83 30 102300 600 3 1730 38.6/85 VUB240E83 40 136500 600 3 1730 38.6/85 VUB250E83 50 170600 600 3 1730 38.6/85 Dimensions SIDE VIEW TOP VIEW 203mm (8”) Dimensions COne diffuser kits Series VUB-1E KW 5-25 A B C 368mm (14.5") 114mm (4.5") 222mm (8.75") VUB-2E 30-50 470mm (18.5") 210mm (8.25") 318mm (12.5") SINGLE CONE DIFFUSER THREE CONE DIFFUSER A A B Cone Diffuser Dimensions B to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com Series A B VUBCD1E 327mm (12.875") 355mm (14") VUBCD2E 327mm (12.875") 457mm (18") VUBH31E 190mm (7.5") 536mm (21.125") VUBH32E 219mm (8.625") 644mm (25.375") INDUSTRIAL heaters | 39 DX-234 Series Hose Down Heater The perfect solution for heating people and equipment in moist and corrosive, non-hazardous environments. Features • All the necessary safety and temperature controls are built-in to a single package • Components and motor are factory-wired to a single terminal block for field wiring; reducing installation time and errors • Heater, fan motor and controls are all connected at the same branch circuit Specifications • Stainless steel construction, epoxy-coated aluminum fan blade, and nonmetallic NEMA 4X terminal enclosure Applications • Food processing plants, marine and offshore, wastewater treatment plants, dairies, cement plants, car washes, power generating stations, coal handling areas, swimming pools Voltage 120 to 600VAC Wattage 2kW to 47kW Colour / Finish Stainless Steel; Matte Plastic Heating Element Type 316 stainless steel finned tubular Construction 16 gauge corrosion resistant stainless steel housing and NEMA 4X control enclosure. Adjustable stainless steel louvers, can be rotated 90º to direct airflow up, down, left or right. Discharge Horizontal Airflow / CFM 700 to 2400 Controls & Wiring Automatic reset overtemperature cutout, fan delay relay, controlling contactor, transformer for 24V control circuit, terminal block for field wiring and separate motor contactor. Mounting Comes with stainless steel swivel mounting bracket for wall or ceiling installation. Warranty One year from date of installation (repair only). UL approved for use in Canada and the U.S. Dimensions CEILING CEILING 8" Min Z BH 3/8-16 THREADED RODS; 4 PLC'S (NOT SUPPLIED WITH HEATER) BL WALL WALL AIRFLOW M Overall Heater Dimensions 8" Min 8" Min Y WALL Swivel Bracket (Wall Mounting') 8" Min X Conduit Opening for Field Wiring Standard Wall and Ceiling Installation with Swivel Mounting Bracket 6 Foot Min (Any Mounting) FLOOR Optional Ceiling Installation with Four Threaded Rods KW Frame Size 2-7.5 7.6-12 12.1-47 ‘X’ mm (In.) 394 (15.5) 394 (15.5) 660 (26) ‘Y’ mm (In.) 550 (21.5) 550 (21.5) 711 (28) ‘Z’ mm (In.) 330 (13) 330 (13) 510 (20) 40 | industrial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com DX-234 Series Ordering Guide Cat. No. kW Volts Phase Amps CFM Temp Rise (ºC/ºF) Weight (kg/lbs.) Cat. No. kW Volts Phase Amps CFM Temp Rise (ºC/ºF) Weight (kg/lbs.) DX-234-U11R-0020B 2 120 1 21 700 5/9 25/56 DX-234-U11N-0090U 9 480 3 12 1450 11/20 25/56 DX-234-U11R-0020C 2 208 1 12 700 5/9 25/56 DX-234-U11N-0090Z 9 600 3 10 1450 11/20 25/56 DX-234-U11R-0020J 2 240 1 11 700 5/9 25/56 DX-234-U11N-0100D 10 208 3 30 1450 12/22 25/56 DX-234-U11R-0020N 2 277 1 10 700 5/9 25/56 DX-234-U11N-0100J 10 240 1 44 1450 12/22 25/56 DX-234-U11N-0030B 3 120 1 29 700 8/14 25/56 DX-234-U11N-0100K 10 240 3 27 1450 12/22 25/56 DX-234-U11N-0030C 3 208 1 17 700 8/14 25/56 DX-234-U11N-0100N 10 277 1 39 1450 12/22 25/56 DX-234-U11N-0030D 3 208 3 11 700 8/14 25/56 DX-234-U11N-0100T 10 480 1 22 1450 12/22 25/56 DX-234-U11N-0030J 3 240 1 15 700 8/14 25/56 DX-234-U11N-0100U 10 480 3 14 1450 12/22 25/56 DX-234-U11N-0030K 3 240 3 10 700 8/14 25/56 DX-234-U11N-0100Z 10 600 3 11 1450 12/22 25/56 DX-234-U11N-0030N 3 277 1 13 700 8/14 25/56 DX-234-U11N-0120D 12 208 3 36 1450 14/26 25/56 DX-234-U11N-0030T 3 480 1 8 700 8/14 25/56 DX-234-U11N-0120K 12 240 3 32 1450 14/26 25/56 DX-234-U11N-0030U 3 480 3 5 700 8/14 25/56 DX-234-U11N-0120N 12 277 1 46 1450 14/26 25/56 DX-234-U11N-0030Z 3 600 3 4 700 8/14 25/56 DX-234-U11N-0120T 12 480 1 27 1450 14/26 25/56 DX-234-U11R-0050C 5 208 1 27 700 13/24 25/56 DX-234-U11N-0120U 12 480 3 16 1450 14/26 25/56 DX-234-U11N-0050D 5 208 3 16 700 13/24 25/56 DX-234-U11N-0120Z 12 600 3 13 1450 14/26 25/56 DX-234-U11R-0050J 5 240 1 23 700 13/24 25/56 DX-234-U11L-0130D 12.5 208 3 37 2400 9/17 52/115 DX-234-U11N-0050K 5 240 3 15 700 13/24 25/56 DX-234-U11L-0130K 12.5 240 3 33 2400 9/17 52/115 DX-234-U11R-0050N 5 277 1 20 700 13/24 25/56 DX-234-U11L-0130U 12.5 480 3 17 2400 9/17 52/115 DX-234-U11R-0050T 5 480 1 12 700 13/24 25/56 DX-234-U11L-0130Z 12.5 600 3 14 2400 9/17 52/115 DX-234-U11N-0050U 5 480 3 8 700 13/24 25/56 DX-234-U11L-0150D 15 208 3 44 2400 12/21 52/115 DX-234-U11N-0050Z 5 600 3 6 700 13/24 25/56 DX-234-U11L-0150K 15 240 3 39 2400 12/21 52/115 DX-234-U11N-0080C 7.5 208 1 39 700 19/35 25/56 DX-234-U11L-0150U 15 480 3 20 2400 12/21 52/115 DX-234-U11N-0080D 7.5 208 3 23 700 19/35 25/56 DX-234-U11L-0150Z 15 600 3 16 2400 12/21 52/115 DX-234-U11N-0080J 7.5 240 1 34 700 19/35 25/56 DX-234-U11L-0200U 20 480 3 26 2400 16/28 52/115 DX-234-U11N-0080K 7.5 240 3 21 700 19/35 25/56 DX-234-U11L-0200Z 20 600 3 21 2400 16/28 52/115 DX-234-U11N-0080N 7.5 277 1 29 700 19/35 25/56 DX-234-U11A-0250U 25 480 3 32 2400 19/35 52/115 DX-234-U11N-0080T 7.5 480 1 17 700 19/35 25/56 DX-234-U11A-0250Z 25 600 3 26 2400 19/35 52/115 DX-234-U11N-0080U 7.5 480 3 11 700 19/35 25/56 DX-234-U11A-0300U 30 480 3 38 2400 23/42 52/115 DX-234-U11N-0080Z 7.5 600 3 9 700 19/35 25/56 DX-234-U11A-0300Z 30 600 3 31 2400 23/42 52/115 DX-234-U11N-0090C 9 208 1 46 1450 11/20 25/56 DX-234-U11A-0350U 35 480 3 44 2400 27/48 52/115 DX-234-U11N-0090D 9 208 3 28 1450 11/20 25/56 DX-234-U11A-0350Z 35 600 3 35 2400 27/48 52/115 DX-234-U11N-0090J 9 240 1 40 1450 11/20 25/56 DX-234-U11A-0390U 38.4 480 3 48 2400 30/54 52/115 DX-234-U11N-0090K 9 240 3 24 1450 11/20 25/56 DX-234-U11A-0390Z 38.4 600 3 38 2400 30/54 52/115 DX-234-U11N-0090N 9 277 1 35 1450 11/20 25/56 DX-234-U11A-0470Z 47 600 3 47 2400 36/64 52/115 DX-234-U11N-0090T 9 480 1 20 1450 11/20 25/56 Control Options (factory installed) Code Description D Power Disconnect Switch L “Heater on” Pilot Light M Secondary Manual Reset Overtemperature Cutout. This option is not available if option Code S or V are also specified. S Three-Position Selector Switch (heater-standby-fan). This option is not available if option Code M or V are also specified. T Built-in Thermostat 10 to 32ºC / 50 to 90ºF V 120V Control Circuit, fused secondary and grounded. This option is not available if option Code S or M are also specified. Nor can both K and L be specified. X 2-Stage Control 1004328 Washdown / corrosion resistant wall-mounted thermostat for non-hazardous locations 4 to 38ºC / 40 to 100ºF to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial heaters | 41 DX-233 Series Explosion Proof Heater Heavy duty heaters, designed for safety, durability and reliability. Features • Industry’s lowest ignition temperature code rating: T3C, 160ºC/320ºF • Dual over-temperature protection: automatic and manual reset cutout for additional safety • Nontoxic Propylene Glycol heat transfer fluid • Low 70 PSIG relief valve setting, assures initial escaping vapor temperature remains below 160ºC/320ºF ignition point Class I, Divisions 1 and 2, Groups C and D Class II, Divisions 1 and 2, Groups E, F and G Class I, Zones 1 and 2, Group IIB Temperature Code T3C, 320º F (160º C) Specifications Voltage 208 (1 & 3 Ph), 240 (1 & 3 Ph), 480 (3 Ph), 600V (3 Ph); 60Hz Wattage Three sizes ranging from 3 to 30kW. Colour Almond Finish • Built for use in dry non-corrosive areas Baked on polyester powder-coated cabinet; epoxy covered motor; NEMA 7, 9 cast aluminum control circuit enclosure. Also available in 316 stainless steel or Heresite® construction. Contact factory for information. Construction Heavy 14 gauge steel cabinet; aluminum fan blade. Heating Element Applications Welded steel heat exchanger with painted steel headers, steel tubes and spiral wound aluminum fins. Heat Exchanger The advanced design allows lower operating temperatures from sealed liquid-to-air heat exchanger with steel tubes, and integral aluminum fins. The pressure relief device provides excess pressure protection. Controls & Wiring 24VAC transformer; contactor; with automatic and manual reset over temperature thermal cutouts. Adjustable covers. Installation Easy access to motor and fan; motors are prewired to control enclosure. Warranty One year from date of installation. CSA certified and FM approved for use in Canada and the U.S. • Modular design • Aircraft hangers/service areas, coal mines/preparation plants, gasoline fueling/storage areas, paint spraying/storage areas, utility plants Dimensions SIDE VIEW FRONT VIEW Frame Size Overall Heater Dimensions Weight Size 1 Size 2 Size 3 ‘X’ mm (In.) 464 (18.3) 464 (18.3) 508 (20) ‘Y’ mm (In.) 492 (19.4) 594 (23.4) 695 (27.4) ‘Z’ mm (In.) 408 (16.1) 513 (20.2) 614 (24.2) Net kg (Lbs.) 50 (110) 68 (150) 86 (190) Shipping kg (Lbs.) 59 (130) 77 (169) 98 (216) 42 | industrial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com DX-233 Series Ordering Guide Cat. No. kW Volts Phase Amps Size Temp Rise (ºC/ºF) Weight (kg/lbs.) Cat. No. kW Volts Phase Amps CFM Temp Rise (ºC/ºF) Weight (kg/lbs.) DX-233-CA-0036C 3 208 1 17 1 8/15 50/110 DX-233-CA-0106D 10 208 3 30 1 21/38 50/110 DX-233-CA-0036D 3 208 3 10 1 8/15 50/110 DX-233-CA-0106J 10 240 1 44 1 21/38 50/110 DX-233-CA-0036J 3 240 1 15 1 8/15 50/110 DX-233-CA-0106K 10 240 3 26 1 21/38 50/110 DX-233-CA-0036K 3 240 3 9 1 8/15 50/110 DX-233-CA-0106U 10 480 3 13 1 21/38 50/110 DX-233-CA-0036U 3 480 3 5 1 8/15 50/110 DX-233-CA-0106Z 10 600 3 11 1 21/38 50/110 DX-233-CA-0036Z 3 600 3 4 1 8/15 50/110 DX-233-CB-0156D 15 208 3 44 2 15/27 68/150 DX-233-CA-0056C 5 208 1 26 1 13/25 50/110 DX-233-CB-0156K 15 240 3 38 2 15/27 68/150 DX-233-CA-0056D 5 208 3 16 1 13/25 50/110 DX-233-CB-0156U 15 480 3 19 2 15/27 68/150 DX-233-CA-0056J 5 240 1 23 1 13/25 50/110 DX-233-CB-0156Z 15 600 3 16 2 15/27 68/150 DX-233-CA-0056K 5 240 3 14 1 13/25 50/110 DX-233-CB-0206U 20 480 3 25 2 19/35 68/150 DX-233-CA-0056U 5 480 3 7 1 13/25 50/110 DX-233-CB-0206Z 20 600 3 21 2 19/35 68/150 DX-233-CA-0056Z 5 600 3 6 1 13/25 50/110 DX-233-CC-0256U 25 480 3 31 3 14/26 86/190 DX-233-CA-0086C 7.5 208 1 38 1 16/28 50/110 DX-233-CC-0256Z 25 600 3 25 3 14/26 86/190 DX-233-CA-0086D 7.5 208 3 23 1 16/28 50/110 DX-233-CC-0306U 30 480 3 37 3 13/25 86/190 DX-233-CA-0086J 7.5 240 1 34 1 16/28 50/110 DX-233-CC-0306Z 30 600 3 30 3 13/25 86/190 DX-233-CA-0086K 7.5 240 3 20 1 16/28 50/110 DX-233-CA-0086U 7.5 480 3 10 1 16/28 50/110 DX-233-CA-0086Z 7.5 600 3 9 1 16/28 50/110 Control Options (factory installed) Code Description D Power Disconnect Switch K “Warning” Pilot Light L “Heater On” Pilot Light M Secondary Manual Reset Overtemperature Cutout. This option is not available if option Code S or V are also specified. S Two-Position Selector Switch (auto-fan). This option is not available if option Code M or V are also specified. T Built-in Thermostat 10 to 32ºC / 50 to 90ºF V 120V Control Circuit, fused secondary and grounded. This option is not available if option Code S or M are also specified. Nor can both K and L be specified. Control Options (field installed) Code Description HLS-1 Hazardous location SPDT remote mount adjustable thermostat with bi-metal sensor, rated 347V – 25A Mounting Hardware (field installed) Cat. No. Description DX-1022451 Ceiling mounting kit for frame size 1, 2, 3 DX-1022454 Wall mounting kit for frame size 1, 2, 3 DX-1022457 Pole mounting kit for frame size 1, 2, 3 DX-1007002 Remote wall thermostat for use with DX-233 series heaters to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial heaters | 43 EU Series Industrial Unit Heater Extensive selection of models ranging from 3 to 50kW – each with spiral finned elements and sealed ball-bearing motors for long service life. Features • Built-in adjustable thermostat on models up to and including 12kW • Ceiling hanger bracket included, optional wall bracket available (allows swivel movement) • Five-way adjustable louvers to direct airflow • EU models up to and including 12kW are UL and CSA approved for vertical and horizontal mounting Applications • Shipping / receiving areas, warehouse storage areas and garages. Specifications Voltage 120, 208, 240, 277, 347, 480, 600V - 1/3 Phase Wattage Three cabinet sizes are available. The EUH series is 3-12kW, the EUL is 15-30kW and the EUS is 40-50kW. Colour Almond Finish Hybrid polyester epoxy powder coat paint finish. Construction The cabinet is constructed of 18 gauge die formed steel. The units have individual adjustable 20 gauge convex profile air directing louvers. The louvers are friction fastened to a single piece 20 gauge frame to prevent movement, once adjusted to the desired position. Heating Element The heating element has a metal tubular sheath fused with spiral steel fins. The heating element contains a high quality nickel chromium wire, encased in solidly packed magnesium oxide insulation. Motor & Fan The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, airflow, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball bearings. Controls A jumper is provided to disable built-in thermostats when remote thermostats are required. Summer fan control and low voltage control options are field installed. Warranty One year warranty on complete unit. CSA certified and UL approved. Control Options (field installed) Accessories (field installed) Cat. No. Description Cat. No. Description EUAF2 Summer fan switch EUD20J3 Power disconnect 3 phase, 20A/600V EUAR11 24V low voltage relay/transformer kit for 120V unit heaters EUD30Y2 Power disconnect 2 phase, 30A/277V EUAR21 24V low voltage relay/transformer kit for 208V unit heaters EUD30J3 Power disconnect 3 phase, 30A/600V EUAR31 24V low voltage relay/transformer kit for all other voltages EUD55J3 Power disconnect 3 phase, 55A/600V EUAR41 24V low voltage relay/transformer kit for 277V unit heaters EUD55J6 Power disconnect 6 phase, 55A/600V EUARCR 24V low voltage relay less transformer, suitable for all units EUHWB Wall hanger bracket for EUH series (3-12kW) EUAT Single pole thermostat kit for 15-50kW unit heaters EULSWB Wall hanger bracket for EUL/EUS series (15-50kW) 44 | industrial HEATERS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com EU Series Ordering Guide Cat. No. kW BTU Volts Phase CFM Weight (kg/lbs.) Cat. No. kW BTU Volts Phase CFM Weight (kg/lbs.) EUH03B11T 3 10236 120 1 350 16.0/36 EUH10B74CT 10 34120 480 1/3 600 22.0/50 EUH03B21T 3 10236 208 1 350 16.0/36 EUH10B84CT 10 34120 600 1/3 600 22.0/50 EUH03B24CT 3 10236 208 1/3 350 16.0/36 EUH12B74CT 12 40944 480 1/3 600 22.0/50 EUH03B31T 3/2.3 10236/7677 240/208 1 350 16.0/36 EUH12B84CT 12 40944 600 1/3 600 22.0/50 EUL15B23C 15 51180 208 3 990 45.0/100 EUH03B34CT 3/2.3 10236/7677 240/208 1/3 350 16.0/36 EUH03B41CT 3 10236 277 1 350 18.0/40 EUL15B73C 15 51180 480 3 1200 48.6/108 EUH03B51CT 3 10236 347 1 350 18.0/40 EUL15B83C 15 51180 600 3 1200 48.6/108 EUH03B73CT 3 10236 480 3 350 18.0/40 EUL20B23C 20 68240 208 3 990 45.0/100 EUH03B81CT 3 10236 600 1 350 18.0/40 EUL20B73C 20 68240 480 3 1200 48.6/108 EUH03B83CT 3 10236 600 3 350 18.0/40 EUL20B83C 20 68240 600 3 1200 48.6/108 EUH05B21T 5 17060 208 1 350 16.0/36 EUL25B73C 25 85300 480 3 1200 48.6/108 EUH05B24CT 5 17060 208 1/3 350 16.0/36 EUL25B83C 25 85300 600 3 1200 48.6/108 EUL30B73C 30 120360 480 3 1600 58.1/129 EUH05B31T 5/3.8 17060/12795 240/208 1 350 16.0/36 EUH05B34CT 5/3.8 17060/12795 240/208 1/3 350 16.0/36 EUL30B83C 30 120360 600 3 1600 58.1/129 EUH05B41T 5 17060 277 1 350 18.0/40 EUS40B73C 40 136480 480 3 1950 72.0/160 EUH05B51CT 5 17060 347 1 350 18.0/40 EUS40B83C 40 136480 600 3 1950 72.0/160 EUH05B74CT 5 17060 480 1/3 350 18.0/40 EUS50B73C 50 170600 480 3 1950 72.0/160 EUH05B84CT 5 17060 600 1/3 350 18.0/40 EUS50B83C 50 170600 600 3 1950 72.0/160 EUH08B24CT 7.5 25590 208 1/3 600 21.0/46 EUH08B34CT 7.5/5.6 25590/19193 240/208 1/3 600 21.0/46 Note: T = Built-in thermostat, C = Built-in contactor, CT = Built-in thermostat and contactor Units rated 20kW and higher are suitable for 2 stage operation. EUH08B74CT 7.5 25590 480 1/3 600 22.0/50 EUH08B84CT 7.5 25590 600 1/3 600 22.0/50 EUH10B24CT 10 34120 208 1/3 600 21.0/46 EUH10B34CT 10/7.5 34120/25590 240/208 1/3 600 21.0/46 Dimensions FRONT VIEW Built-in single pole thermostat controls are standard up to and including 12kW models. Units showing 1/3 phase are field convertible to desired phase. 208V units have 208V control voltage, 240V control on all others, except for EUS units which have 120V control. Transformers are provided where necessary. SIDE VIEW EUH MOUNTING BRACKET EUL/EUS MOUNTING BRACKET 9/16" Dia. Mounting Holes 1/2" Swivel Bolt EUH 330mm 495mm 330mm 165mm 318mm 299mm 64mm 330mm 13” 19 1/2” 13” 6 1/2” 12 1/2” 11 3/4” 2 1/2” 13” EUH 318mm 356mm 203mm 279mm 12 1/2” 14” 8” 11” EUL 502mm 699mm 419mm 257mm 410mm 462mm 118mm 500mm 19 3/4” 27 1/2” 16 1/2” 10 1/8” 16 1/8” 18 1/4” 4 5/8” 19 3/4” EUL 514mm 533mm 533mm 654mm 20 1/2” 21” 21” 25 3/4” EUS 578mm 745mm 645mm 391mm 633mm 499mm 130mm 533mm 22 3/4” 29 1/16” 25 3/8” 15 3/8” 25” 19 3/4” 5 1/8” 21” EUS 635mm 654mm 443mm 533mm 25 3/4” 17 1/2” 21” 25” to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial HEATERS | 45 CUH Series Compact Unit Heater Loaded with features, this powerful unit heats quickly and offers great value. Features • Powerful 5000W (240V) heat output • Safe, durable stainless steel sheathed element • Adjustable louvers direct warm air where needed • Built-in single-pole bulb thermostat for accurate temperature control • Fan delay utilizes residual heat • Ceiling and wall-mount swivel bracket included Specifications Applications • Shipping/receiving areas, warehouse storage areas, garages Voltage 240/208 volts Wattage 5000/3750 W Colour Almond Finish Powder coated epoxy finish Construction Heavy duty steel cabinet. Must be hardwired for operation. Warranty One year warranty on complete unit. CUL and UL approved. Ordering Guide Cat. No. Watts BTU Volts Dimensions (W x H x D) Weight (kg/lbs.) CUH05B31T 5000/3750 17,060 / 12,795 240/208 279mm x 229 mm x 229mm (11" x 9" x 9") 4.5/10 Dimensions 46 | industrial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 7150 Series Pump House Heater This natural convection heater provides efficient freeze protection in specialty applications. Features • Cast aluminum grid element for lower surface temperatures • Steel corrosion resistant housing Specifications • Built-in adjustable thermostat control to prevent pump house freeze-up Applications • Boiler rooms, garage, grease pits, residential / farm pump house systems, equipment buildings Voltage 120, 240/208V Wattage 500/375W Colour Almond Finish Painted with a hybrid polyester epoxy coating. Construction The heater wiring and control enclosure are of heavy gauge, corrosion treated formed steel. Heating Element Exclusive cast aluminum heating grid in which the resistance wire is completely cast into the aluminum molded form, deeply embedded and fully enclosed. Design achieves a wider distribution of heat at a safer lower surface temperature. Control Built-in adjustable bi-metallic thermostat. (7º to 25ºC / 45º to 77ºF). Warranty One year on complete unit. CUL and UL approved. Ordering Guide Cat. No. Watts BTU Volts Weight (kg/lbs.) 7150B11 500 1706 120 2.3/5 7150B31 500/375 1706/1279 240/208 2.3/5 Dimensions SIDE VIEW FRONT VIEW 139.7mm[5 1/2"] 441.3mm[17 3/8"] 428.6mm[16 7/8"] 38.1mm[1 1/2"] 96.8mm[3 13/16"] BACK VIEW 22.2mm[7/8"] 6.4mm[1/4"] DIA 4 HOLES TOP VIEW 22.2mm[7/8"] Dia. KO 22.2mm[7/8"] Dia. KO 76.2mm[3"] 57.2mm[2 1/4"] to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial heaters | 47 FPEP / CEP Series Hazardous Location Convection Heater Provides both durability and maximum safety in hazardous environments. Applications • Paint rooms, chemical storage, mines and dusty environments, sewage pumping stations, oil refineries Specifications Voltage 120, 208, 240, 347, 480, 600V – 1/3 Phase Wattage 200, 400, 500, 750, 1000, 1500, 3000W Finish Polyester powder coated paint. Construction Each heater is constructed of heavy duty schedule 40 finned steel pipe specially coated with a polyester powder finish for rust protection. The terminal enclosure is cast alloy and has two 3/4" electrical connections. Heating Element Totally enclosed nickel chromium resistance element with incoloy sheathing. The entire element assembly is sealed within a schedule 40 finned steel pipe. Warranty One year on complete unit. CSA certified and UL approved. Warning To prevent ignition of hazardous atmospheres, heater should not be installed where vapors or gases having ignition temperatures less than 320ºF for CEP15 and 504ºF for CEP30 are present. Classifications Control Options (field installed) Cat. No. Description Cat. No. Description FPEP, CEP15 models Class I, Groups C&D Div 1, 2 Class II, Groups E, F&G Div 1, 2 Temp code T3C (320ºF) AR-0464-EP-1 Hazardous location DPST remote mount adjustable thermostat with external sensor, rated 240V – 25A AR-0464-EP-2 CEP30 models Class I, Group D Div 1, 2 Temp code T2B (504ºF) Tamperproof version of AR-0464-EP-1, cover must be removed to adjust HLS-1 Hazardous location SPDT remote mount adjustable thermostat with bi-metal sensor, rated 347V – 25A 48 | industrial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com FPEP / CEP Series Ordering Guide Cat. No. Description Watts BTU Volts Phase Amps Length (mm/in) Weight (kg/lbs.) CEP15C11 Explosion proof convection heater 1500 5118 120 1 12.5 1499 / 59 29.94/66 CEP15C21 Explosion proof convection heater 1500 5118 208 1 7.2 1499 / 59 29.94/66 CEP15C31 Explosion proof convection heater 1500 5118 240 1 6.3 1499 / 59 29.94/66 CEP15C51 Explosion proof convection heater 1500 5118 347 1 4.3 1499 / 59 29.94/66 CEP15C71 Explosion proof convection heater 1500 5118 480 1 3.1 1499 / 59 29.94/66 CEP30C24 Explosion proof convection heater 3000 10236 208 1/3 14.4 1372 / 54 61.2/135 CEP30C34 Explosion proof convection heater 3000 10236 240 1/3 12.5 1372 / 54 61.2/135 CEP30C51 Explosion proof convection heater 3000 10236 347 1 8.65 1372 / 54 61.2/135 CEP30C74 Explosion proof convection heater 3000 10236 480 1/3 6.3 1372 / 54 61.2/135 CEP30C84 Explosion proof convection heater 3000 10236 600 1/3 5.0 1372 / 54 61.2/135 FPEP200211 Explosion proof convection heater 200 682 120 1 1.7 550 / 21 5/8 6.35 /14 FPEP400211 Explosion proof convection heater 400 1365 120 1 3.3 876 / 34 1/2 8.62/19 FPEP400221 Explosion proof convection heater 400 1365 208 1 1.9 876 / 34 1/2 8.62/19 FPEP400231 Explosion proof convection heater 400 1365 240 1 1.7 876 / 34 1/2 8.62/19 FPEP500211 Explosion proof convection heater 500 1706 120 1 4.2 1020 / 40 1/8 10.89/24 FPEP500221 Explosion proof convection heater 500 1706 208 1 2.4 1020 / 40 1/8 10.89/24 FPEP500231 Explosion proof convection heater 500 1706 240 1 2.1 1020 / 40 1/8 10.89/24 FPEP750211 Explosion proof convection heater 750 2559 120 1 6.3 1470 / 57 7/8 15.4/34 FPEP750221 Explosion proof convection heater 750 2559 208 1 3.6 1470 / 57 7/8 15.4/34 FPEP750231 Explosion proof convection heater 750 2559 240 1 3.1 1470 / 57 7/8 15.4/34 FPEP1000211 Explosion proof convection heater 1000 3412 120 1 8.3 1876 / 73 7/8 18.6/41 FPEP1000221 Explosion proof convection heater 1000 3412 208 1 4.8 1876 / 73 7/8 18.6/41 FPEP1000231 Explosion proof convection heater 1000 3412 240 1 4.2 1876 / 73 7/8 18.6/41 Dimensions 76mm (3") TOP VIEW 254mm (10") 229mm (9") 139mm (5.48") 130mm (5.125") A “A” – See length in Ordering Guide end view SIDE VIEW end view 136mm (5.36") 55mm (2.14") to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial heaters | 49 CRT / KR / KRR Series Radiant Heater Enables spot heating of specific areas without having to heat the entire building. Features • Extremely rapid warm up • Provides effective heat even in cold ambient temperatures CRT - Narrow beam • Incoloy elements offer impact, vibration and splash resistance • Units can be mounted in any position KR - Wide beam Applications • Shipping / receiving areas, factories, arenas, bus shelters & terminals, indoor swimming pools KRR - Wide beam Available in Canada only Specifications Voltage CRT units 120, 208, 240, 600V KR units 120, 208, 240V KRR units 208, 240, 600V Wattage CRT units have four sizes ranging from 1000 - 4000W KR units have five sizes ranging from 1100 - 3600W KRR units have four sizes ranging from 1800 - 5000W Construction Extruded aluminum housing. There is a choice of 2 angle reflectors, CRT - 55° angle and KR/KRR - 75° angle. Heating Element Totally enclosed nickel chromium resistance element with incoloy sheathing. The CRT unit offers a narrow beam when you need a unit for high mounting heights. Confines heat spread to a 55° angle. The KR (single element)/KRR (double element, high intensity) provides wide beam coverage. The heat spreads over a 75° angle and requires mounting closer to the object than the narrow beam. Warranty One year warranty on complete unit. CSA certified. 50 | industrial heaters to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com CRT / KR / KRR Series Specifications Total Length (mm/in) Heating Length (mm/in) Weight (kg/lbs.) Cat. No. Watts BTU Volts / Phase Total Length (mm/in) Heating Length (mm/in) Weight (kg/lbs.) Cat. No. Watts BTU Volts / Phase CRT351011 1000 3412 120/1 946/37.3 610/24 6.3/14 KR5253C121 2500 7677 208/1 1553/61.1 1295/51.1 5.4/12 CRT351021 1000 3412 208/1 946/37.3 610/24 6.3/14 KR5253C131 2500 7677 240/1 1553/61.1 1295/51.1 5.4/12 CRT351031 1000 3412 240/1 946/37.3 610/24 6.3/14 KR6303C121 3000 10236 208/1 1867/73.5 1603/63.1 7.7/17 CRT482021 2000 6824 208/1 1276/50.3 940/37 8.1/18 KR6303C131 3000 10236 240/1 1867/73.5 1603/63.1 7.7/17 CRT482031 2000 6824 240/1 1276/50.3 940/37 8.1/18 KR7363C121 3600 12283 208/1 2712/85.5 1902/74.9 7.7/17 CRT482081 2000 6824 600/1 1276/50.3 940/37 8.1/18 KR7363C131 3600 12283 240/1 2712/85.5 1902/74.9 7.7/17 CRT653021 3000 10236 208/1 1711/67.4 1372/54 10.4/23 CRT653031 3000 10236 240/1 1711/67.4 1372/54 10.4/23 KRR3184C121 1800 6142 208/1 772/30.4 546/21.5 6.3/14 CRT653081 3000 10236 600/1 1711/67.4 1372/54 10.4/23 KRR3184C131 1800 6142 240/1 772/30.4 546/21.5 6.3/14 CRT844021 4000 13648 208/1 2194/86.4 1854/73 13.1/29 KRR3184C181 1800 6142 600/1 772/30.4 546/21.5 6.3/14 CRT844031 4000 13648 240/1 2194/86.4 1854/73 13.1/29 KRR4304C121 3000 10236 208/1 1178/46.4 953/37.5 7.2/16 CRT844081 4000 13648 600/1 2194/86.4 1854/73 13.1/29 KRR4304C131 3000 10236 240/1 1178/46.4 953/37.5 7.2/16 KRR4304C181 3000 10236 600/1 1178/46.4 953/37.5 7.2/16 KR3113C111 1100 3753 120/1 772/30.4 546/21.5 3.2/7 KRR5424C121 4200 14330 208/1 1550/61 1370/53 7.7/17 KR3113C121 1100 3753 208/1 772/30.4 546/21.5 3.2/7 KRR5424C131 4200 14330 240/1 1550/61 1370/53 7.7/17 KR3113C131 1100 3753 240/1 772/30.4 546/21.5 3.2/7 KRR5424C181 4200 14330 600/1 1550/61 1370/53 7.7/17 KR4183C121 1800 6142 208/1 1178/46.4 953/37.5 4.5/10 KRR6504C131 5000 17060 240/1 1867/73.5 1603/63.1 9.9/22 KR4183C131 1800 6142 240/1 1178/46.4 953/37.5 4.5/10 KRR6504C181 5000 17060 600/1 1867/73.5 1603/63.1 9.9/22 Note: Consult factory for other wattage and voltage requirements. END VIEW Dimensions END VIEW TOP VIEW TOP VIEW END VIEW TOP VIEW CRT Series 216mm (8 1/2") 108mm (4 1/4") 216mm (8 1/2") 108mm (4 1/4") Heating Length Total Length Heating Length 178mm (7") 178mm (7") SIDE VIEW Total Length KRR MOUNTING BRACKET KR / KRR Series 67.1mm (2 5/8") Heating Length 93.4mm (3 11/16") Total Length to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com industrial heaters | 51 Controls Thermostats Features Line Voltage Low Voltage LINE VOLTAGE Bimetal (TS/TD): • For use with linear and panel convection, electric baseboard and fan-forced heaters • Designed for superior ventilation across bimetal for optimum accuracy Electronic (ETS/ETD): • Works with both convection and fan-forced heaters • Electronic sensing for accurate temperature control • Cycle-to-cycle accuracy of 0.1ºC / 0.2ºF TS/TD ETS/ETD CSA/UL approved cCSAus T822K 1034* / T822K 1018** approved CCTHV No Display *Celsius scale for Canada **Fahrenheit scale for United States Ordering Guide (field installed) Rating LOW VOLTAGE T822 Series: • Traditional styling • Adjustable anticipator setting • Temperature range: 10-30ºC / 50-86ºF • For use with 24V control systems Accessories (field installed) Cat. No. Non-Inductive Inductive Switch Colour Line Voltage Bimetal TS521W 5000W/277V Max. 1/3HP/240V SPST White TD522W 5000W/277V Max. 1/3HP/240V DPST White Colour Rating Cat. No. Amps Min / Max @240V Min / Max @120V Min / Max Inductive Switch Line Voltage Electronic ETS610W1 1.25/7.4A 300/1750W 150/875W 1/3HP/240V SP White ETS610A1 1.25/7.4A 300/1750W 150/875W 1/3HP/240V SP Almond ETD620W1 1.25/7.4A 300/1750W 150/875W 1/3HP/240V DP White Almond ETD620A1 1.25/7.4A 300/1750W 150/875W 1/3HP/240V DP ETS610W2 5.0/16.0A 1200/3840W 600/1920W 1/3HP/240V SP White ETS610A2 5.0/16.0A 1200/3840W 600/1920W 1/3HP/240V SP Almond Cat. No. Description ETD620W2 5.0/16.0A 1200/3840W 600/1920W 1/3HP/240V DP White F290143 Universal plastic thermostat guard with locking key. Fits all units on this page. 162mm (L) x 89mm (W) x 82.8mm (D) ETD620A2 5.0/16.0A 1200/3840W 600/1920W 1/3HP/240V DP Almond Cat. No. Rating Switch Colour 30V AC Max, 1.5A, Fahrenheit Bi-metal White Low Voltage T822K1018 T822K1034 30V AC Max, 1.5A, Celsius Bi-metal White CCTHV100 30V AC, 0.5A TRIAC White CCTHV100B 30V AC, 0.5A, LCD Display, celsius and fahrenheit TRIAC White 52 | CONTROLS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com Controls Digital Electronic Line Voltage Thermostats Line Voltage Thermostats Easy-to-use line voltage thermostats for use with linear and panel convectors, electric baseboards, fan-forced heaters, and radiant ceilings. HTC525 HTC521 HTC625 / HTC625E HTC621 Non-Programmable Model Features Programmable Model Features • 40 Amp TRIAC silent switching • 40 Amp TRIAC silent switching • Manual, precise temperature control set in +/- 0.5°C (0.9°F) • Manual, precise temperature control set in +/- 0.5°C (0.9°F) • Cycle rates for proportional heating • Cycle rates for proportional heating • Built-in surge protection • Built-in surge protection • Temperature display in Celsius or Fahrenheit • Temperature display in Celsius or Fahrenheit • Setting range from +5°C to + 35°C (41°F to 95°F) • Setting range from +5°C to + 35°C (41°F to 95°F) • Heating power level display • Heating power level display • Memory backup for settings • Memory backup for settings • Fast, easy 2-wire installation • Fast, easy 2-wire installation • 3 year warranty • 7 day, 28 event programmable heat control • CSA certified for use in Canada and the U.S. • Backlit display • CSA C828 compliant • Pre-comfort recovery systems • Usage monitor (HTC625E only) • 6 year warranty • CSA certified for use in Canada and the U.S. • CSA C828 compliant Ordering Guide Non-Programmable Programmable Cat. No. Description Cat. No. Description HTC521 3,600W / 240V Digital Non-Programmable HTC621 3,600W / 240V 7 Day Programmable HTC525 4,000W / 240V Digital Non-Programmable HTC625 4,000W / 240V 7 Day Programmable HTC625E 4,000W / 240V 7 Day Programmable with Energy Tracker to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com CONTROLS | 53 Controls Digital Electronic Low Voltage Thermostats Low Voltage Thermostats Easy-to-use low voltage thermostats with easy to read backlit display for use with central heating / cooling systems. THC400 / TCH400P THC401 THC403W Basic Model Features Advanced Programmable Model Features Premium Programmable Model Features • 24 VAC and millivolt compatible • 24 VAC and millivolt compatible • 24 VAC and millivolt compatible • Temperature display in Celsius or Fahrenheit • Temperature display in Celsius or Fahrenheit • Temperature display in Celsius or Fahrenheit • Setting range from +5°C to + 35°C (41°F to 95°F) • Setting range from +5°C to + 35°C (41°F to 95°F) • Setting range from +5°C to + 35°C (41°F to 95°F) • Uses 2 x AA batteries (not included) • Uses 2 x AA batteries (not included) • Uses 2 x AA batteries (not included) • Heat-Off-Cool and Fan On-Auto switch • Precise temperature control set in +/- 0.5°C (0.9°F) • Precise temperature control set in +/- 0.5°C (0.9°F) • R, W, Y, G Terminals • Built-in light sensor activates backlight when room is dark • Built-in light sensor activates backlight when room is dark • Usage monitor • Usage monitor • Separate heat/cool program • Separate heat/cool program • Built-in battery backup for clock and settings • Pre-comfort recovery system • 2 year warranty • Pre-comfort recovery system • Low battery audible alarm • 4 year warranty • Humidity display and humidifier control • Built-in battery backup for clock and settings • Filter change indicator • RC, RH, W, Y, G, H1, H2 Terminals • 4 year warranty Ordering Guide Basic Model Advanced Programmable Model Premium Programmable Model Cat. No. Description Cat. No. Description Cat. No. Description THC400 Digital Non-Programmable THC401 5+2 Day Programmable THC403A 5+1+1 Day Programmable THC400P Single Program Thermostat THC401A 5+1+1 Day Programmable THC403W 7 Day Programmable 54 | CONTROLS to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com Controls Relay Kits & Transformers Ordering Guide Cat. No. Description Cat. No. Description 120VLVR Low Voltage Relay with 24V Transformer Kit – 120V 24VLVR 600/120V, 10/22A Low Voltage Relay less Transformer 208VLVR Low Voltage Relay with 24V Transformer Kit – 208V 24A01G3 Single Relay, 1-6000W @240V with Transformer 240VLVR Low Voltage Relay with 24V Transformer Kit – 240V 24A06G1 Double Relay, 2-6000W @240V with Transformer 347VLVR Low Voltage Relay with 24V Transformer Kit – 347V 600VLVR Low Voltage Relay with 24V Transformer Kit – 600V TRIAC Electronic Relays TRIAC SSR (Solid State Relay) controllers are recommended for use with proportional temperature controllers where long-life, reliable ON/OFF control is required for a resistive load. Features Specifications • No distracting clicking when engaged Voltages 48-600VAC Amps 15, 25, 30 Amps Heat Sink Type MS-19921 (10–15A) Type MS15170 (25–30A) Power Module 10–40A, built-in Input Signal 3–32Vdc, 24VAC, 6mA per pole at 3Vdc Modulating Control Yes Zero-crossing Yes Construction Epoxy thermally protected for humidity protection, overheating, and protection in contaminated environments. Installation Fast adjustment and installation. Must be mounted in well ventilated areas. All TRIACs are mounted on aluminum heat sinks. • Cycles once per second; very fast and quiet Warranty Two year warranty. CSA certified. • Life expectations higher than 1 billion operations Ordering Guide • Suitable for controlling all processes that have either long or short-timed cycles • Keeps temperature closer to desired set point for maximum comfort • Zero-crossing operation and silent arcless switching • Does not create RFI and will not effect sensitive electronic equipment Applications • Resistive load heaters, lighting controls, electronic boilers and humidifiers, ovens, furnaces, IC processing equipment and temperature controls Phase Frequency Dimensions (W x H x D) mm (in.) Cat. No. Amps Volts CCT-15-1-C1 15 48-347VAC 1 60Hz 101.6 x 120.6 x 66.7 (4 x 4.8 x 2.6) CCT-15-1-C2-T347 with Transformer 15 48-347VAC 1 60Hz 119 x 119 x 68.2 (4.7 x 4.7 x 2.7) CCT-25-1-C1 25 48-347VAC 1 60Hz 101.6 x 120.6 x 68.2 (4 x 4.8 x 2.7) CCT-25-1-C2-T347 with Transformer 25 48-347VAC 1 60Hz 119 x 119 x 68.2 (4.7 x 4.7 x 2.7) CCT-30-1-C2 30 48-600VAC 1 60Hz 119 x 119 x 66.6 (4.7 x 4.7 x 2.6) Note: All dimensions are without enclosures. C1 enclosures: 102mm x 102mm (4" x 4") C2 enclosures: 120mm x 120mm (4.7" x 4.7") to order plEAsE call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com CONTROLS | 55 The Dimplex Story Our commitment is to offer the world’s best engineered and best built electric heating products, with the finest support available. Over the years our commitment to product innovation has fostered outstanding in-house research, development and design excellence. On-going product development and sourcing of new products that are essential for the marketplace are a large part of the reason for Dimplex’s success. World expertise • Member of the Glen Dimplex Group of companies of Dublin, Ireland – the world’s largest manufacturer of built-in electric heating products for residential, commercial and industrial heating applications. • Over 8,500 employees worldwide • Global sales of over $2.0 billion • Dimplex North America Limited headquartered in 200,000 square foot manufacturing and distribution facility in Cambridge, Ontario • Multiple warehouses located throughout the United States to ensure fast delivery Committed to in-house research and design excellence • Renowned for on-going product design and expertise in technological development • Continuously invests in product and manufacturing innovation At Dimplex we are committed to quality, innovation and the satisfaction of both you and your customer. Limited Warranty: DIMPLEX® products are tested and inspected prior to shipment and are guaranteed to be free from defects to the purchaser of each new product for a period specified on the applicable Residential, Commercial and Industrial Electric Heating Products catalog page. Any part, which proves to be defective in material or workmanship under normal use within the warranty period, will be replaced or repaired without charge. The Company will not be responsible for any expenses incurred for installation, removal from service, or transportation costs. Any such defect should be brought to the attention of the Company’s office where the product was purchased and is authorized to repair or replace within the terms of the warranty. The warranty will not apply if, in the judgement of the Company, damage or failure has resulted from accident, alteration, misuse, abuse, incorrect installation, or operation on an incorrect power source. The foregoing is in lieu of all other warranties expressed, implied or statutory, and neither assumes, nor authorizes any person to assume for it any other obligation, or liability in connection with said product. Since the paint finish can be damaged through use, no warranty applies to the paint finish, except from manufacturing defects which become apparent within 30 days from the date of installation. DIMPLEX® EXTENDED ELEMENT WARRANTY: All DIMPLEX® BN, LC, LPC, TWH, PLX, DEC, BLAST and ONE elements are warranted, subject to the above conditions, to be free from defect in material and workmanship for ten years. Specifications, finishes and dimensions are subject to change and should be taken as a guide only. to order please call 1-877-362-1101 or fax 1-800-668-6665 www.dimplexheating.com 56 www.dimplexheating.com Printed in Canada 07/11 LI-944
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2011:08:09 11:53:18-04:00 Creator : Adobe InDesign CS5 (7.0) Modify Date : 2011:08:09 11:54:23-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Metadata Date : 2011:08:09 11:54:23-04:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 4673 bytes, use -b option to extract), (Binary data 9060 bytes, use -b option to extract) Instance ID : uuid:56937288-28f2-9b4c-85df-17c00c222af1 Document ID : xmp.did:6E2EF536162068118C149DC528DBE37E Original Document ID : xmp.did:2C26A58A2C20681192B0B79E90511B5B Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:2C26A58A2C20681192B0B79E90511B5B, xmp.iid:2D26A58A2C20681192B0B79E90511B5B, xmp.iid:2E26A58A2C20681192B0B79E90511B5B, xmp.iid:2F26A58A2C20681192B0B79E90511B5B, xmp.iid:3026A58A2C20681192B0B79E90511B5B, xmp.iid:16F85A76BE20681192B0B79E90511B5B, xmp.iid:17F85A76BE20681192B0B79E90511B5B, xmp.iid:F77F11740720681195FEA28F0C9989D2, xmp.iid:F87F11740720681195FEA28F0C9989D2, xmp.iid:FB7F1174072068119A82E7FD060E2D13, xmp.iid:FC7F1174072068119A82E7FD060E2D13, xmp.iid:FD7F1174072068119A82E7FD060E2D13, xmp.iid:F77F117407206811A69D93D6238E9088, xmp.iid:E4D67BA61C2068118C14EAA7B4D179FA, xmp.iid:E5D67BA61C2068118C14EAA7B4D179FA, xmp.iid:E6D67BA61C2068118C14EAA7B4D179FA, xmp.iid:218E00202F2068118C14EAA7B4D179FA, xmp.iid:36469CC94D2068118A6DF2908C7D661E, xmp.iid:47D64E435B2068118A6DF2908C7D661E, xmp.iid:4BD64E435B2068118A6DF2908C7D661E, xmp.iid:4CD64E435B2068118A6DF2908C7D661E, xmp.iid:517CD7555E2068118A6DF2908C7D661E, xmp.iid:527CD7555E2068118A6DF2908C7D661E, xmp.iid:4245A8271D2168118A6DF2908C7D661E, xmp.iid:4645A8271D2168118A6DF2908C7D661E, xmp.iid:31E57FFF392168118A6DF6C44B028436, xmp.iid:32E57FFF392168118A6DF6C44B028436, xmp.iid:462E13A8602168118A6DF6C44B028436, xmp.iid:492E13A8602168118A6DF6C44B028436, xmp.iid:4C2E13A8602168118A6DF6C44B028436, xmp.iid:AD1A69480E2068118A6DED05C97DF4B7, xmp.iid:B01A69480E2068118A6DED05C97DF4B7, xmp.iid:B1759C18452168118A6DC73A262F76CD, xmp.iid:B6759C18452168118A6DC73A262F76CD, xmp.iid:9A753891462168118A6DC73A262F76CD, xmp.iid:9B753891462168118A6DC73A262F76CD, xmp.iid:76EBD1C6B82168118A6DC73A262F76CD, xmp.iid:64966C58E02168118A6DC73A262F76CD, xmp.iid:86FD62E8042268118A6DC73A262F76CD, xmp.iid:8FFD62E8042268118A6DC73A262F76CD, xmp.iid:6B2EF536162068118C149DC528DBE37E, xmp.iid:6E2EF536162068118C149DC528DBE37E, xmp.iid:F30C8DEDED206811871FAFD1400275F6, xmp.iid:2F5D33580D2168118083848609C7E5A7, xmp.iid:8C8E3DBE3E206811808399F9D3575BE7, xmp.iid:8F8E3DBE3E206811808399F9D3575BE7 History When : 2011:02:01 08:24:19-05:00, 2011:02:01 10:36:31-05:00, 2011:02:01 10:36:31-05:00, 2011:02:01 13:11:44-05:00, 2011:02:01 13:13:33-05:00, 2011:02:01 13:18:54-05:00, 2011:02:01 13:20:40-05:00, 2011:02:03 10:01:01-05:00, 2011:02:03 10:02:52-05:00, 2011:02:07 12:20:11-05:00, 2011:02:07 12:20:11-05:00, 2011:02:07 12:32:43-05:00, 2011:02:11 16:43:17-05:00, 2011:04:04 12:40-04:00, 2011:04:04 12:40-04:00, 2011:04:04 12:40:27-04:00, 2011:04:04 12:40:27-04:00, 2011:04:05 13:28:58-04:00, 2011:04:05 13:28:58-04:00, 2011:04:05 13:29:50-04:00, 2011:04:05 13:50:58-04:00, 2011:04:05 13:50:58-04:00, 2011:04:05 13:53:52-04:00, 2011:04:07 10:39:48-04:00, 2011:04:07 10:44:37-04:00, 2011:05:25 15:37:36-04:00, 2011:05:25 15:42:08-04:00, 2011:05:25 20:54:48-04:00, 2011:05:25 20:58:11-04:00, 2011:05:25 21:00:57-04:00, 2011:05:28 14:00:26-04:00, 2011:05:28 14:00:26-04:00, 2011:06:21 13:32:53-04:00, 2011:06:21 13:41:56-04:00, 2011:06:21 13:43:25-04:00, 2011:06:21 13:45:17-04:00, 2011:06:22 13:59:18-04:00, 2011:06:23 11:26:34-04:00, 2011:06:23 11:26:48-04:00, 2011:06:23 11:59:17-04:00, 2011:07:06 09:55:22-04:00, 2011:07:06 09:55:22-04:00, 2011:07:06 11:25:37-04:00, 2011:07:15 08:05:14-04:00, 2011:07:21 10:01:29-04:00, 2011:07:21 10:02:53-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /, /metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /;/metadata, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:6B2EF536162068118C149DC528DBE37E Derived From Document ID : xmp.did:B01A69480E2068118A6DED05C97DF4B7 Derived From Original Document ID: xmp.did:2C26A58A2C20681192B0B79E90511B5B Derived From Rendition Class : default Doc Change Count : 637 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 58EXIF Metadata provided by EXIF.tools