0611CT1001 100217 Catalog
108744-Catalog 108744-Catalog 108744-Catalog 785901 Batch5 unilog cesco-content
107992-Catalog 1 107992-Catalog_1 107992-Catalog_1 785901 Batch5 unilog cesco-content
2014-07-05
: Pdf 100217-Catalog 100217-Catalog 785901 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 244
Download | ![]() |
Open PDF In Browser | View PDF |
PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog 0611CT1001 R05/14 2014 Class 0611 CONTENTS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Catalog Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Automatic Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Motor Circuit Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Trip Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Accessories for Micrologic™ Trip Units . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Accessories and Auxiliaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 Circuit Breaker Mounting and Connections . . . . . . . . . . . . . . . . . . . . . . . 117 Installation Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 Trip Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 Catalog Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 ™ PowerPact™ H-, J-, and L-Frame Circuit Breakers 2 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers SECTION 1: CATALOG NUMBERING ..............................................................................7 PowerPact™ with Micrologic™ Circuit Breakers .......................................................................... 7 Catalog Numbering ....................................................................................................................... 8 SECTION 2: GENERAL INFORMATION .........................................................................10 Applications ................................................................................................................................ 10 Mission Critical Circuit Breakers ................................................................................................. 12 Flexible Configurations ............................................................................................................... 14 General Characteristics ............................................................................................................. 15 PowerPact H-, J-, and L-frame Circuit Breaker Trip Units ......................................................... 20 SECTION 3: CIRCUIT BREAKERS .................................................................................22 Dual-Break Rotating Contacts .................................................................................................... 22 High Ampere Interrupting Ratings (AIR) ..................................................................................... 22 Internal Operating Mechanism.................................................................................................... 22 Handle Position Indication .......................................................................................................... 23 Circuit Breaker Ratings ............................................................................................................... 23 Special Applications.................................................................................................................... 25 H- and J-Frame Catalog Numbers.............................................................................................. 26 L-Frame Circuit Breaker Catalog Numbers................................................................................. 36 SECTION 4: AUTOMATIC SWITCHES ...........................................................................42 Automatic Switch Functions ....................................................................................................... 42 Specifications.............................................................................................................................. 43 Catalog Numbers ........................................................................................................................ 44 SECTION 5: MOTOR CIRCUIT PROTECTION ...............................................................46 General Information .................................................................................................................... 46 Motor Branch Circuit Protection Function .................................................................................. 46 Trip Class of a Overload Relay Device ....................................................................................... 47 Asynchronous-Motor Starting Parameters ................................................................................. 47 Motor-Feeder Solutions ............................................................................................................. 47 Electronic Motor Circuit Protectors (AC Only)............................................................................. 49 Micrologic 1.3 M Electronic Trip Units for Instantaneous Protection Only (L-Frame Circuit Breakers Only) ..................................................................... 52 Micrologic 2.2 M and 2.3 M Electronic Trip Units ....................................................................... 53 Indications................................................................................................................................... 54 3 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers SECTION 6: TRIP UNITS ................................................................................................ 58 Available Trip Units ..................................................................................................................... 58 Protection of Distribution Systems .............................................................................................. 61 SECTION 7: ACCESSORIES FOR MICROLOGIC™ TRIP UNITS ................................ 77 Display Options ........................................................................................................................... 77 Circuit Breaker Communication Network Options....................................................................... 80 SECTION 8: ACCESSORIES AND AUXILIARIES ......................................................... 94 Communication Network ............................................................................................................ 94 Accessory Connections............................................................................................................... 97 Auxiliary and Alarm Indication Contacts...................................................................................... 97 SDx and SDTAM Modules for Micrologic ................................................................................... 99 Shunt Trip (MX) and Undervoltage Trip (MN) ........................................................................... 101 Motor Operator.......................................................................................................................... 102 Add-On Ground-Fault Module (GFM) (H- and J-Frame Only) .................................................. 104 Earth Leakage Module (ELM) (H- and J-Frame Only) .............................................................. 105 Rotary Operating Handles......................................................................................................... 106 Class 9422 Flange-Mounted Variable-Depth Operating Mechanism........................................ 109 Locking Systems ....................................................................................................................... 109 Manual Mechanical Interlocking Systems ................................................................................ 110 Sealing Accessory..................................................................................................................... 113 Front-Panel Escutcheons.......................................................................................................... 113 Toggle Collars (For Drawout Mounting) .................................................................................... 114 Toggle Boot............................................................................................................................... 114 Handle Extension ...................................................................................................................... 114 Circuit Breaker Enclosures and Enclosure Accessories ........................................................... 115 SECTION 9: CIRCUIT BREAKER MOUNTING AND CONNECTIONS ........................ 117 Mounting Configurations ........................................................................................................... 117 Unit-Mount Circuit Breakers ...................................................................................................... 118 I-Line™ Circuit breakers ........................................................................................................... 119 Connection ................................................................................................................................ 123 4 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers SECTION 10: INSTALLATION RECOMMENDATIONS .................................................129 Operating Conditions ............................................................................................................... 129 Installation in Equipment .......................................................................................................... 132 Safety Clearances and Minimum Distances ............................................................................. 132 Safety Clearance ...................................................................................................................... 133 Control Wiring .......................................................................................................................... 134 24 Vdc Power Supply Module .................................................................................................. 136 Wiring ....................................................................................................................................... 137 Modbus ..................................................................................................................................... 138 SECTION 11: WIRING DIAGRAMS ................................................................................139 SECTION 12: DIMENSIONS ...........................................................................................148 SECTION 13: TRIP CURVES ...........................................................................................171 CATALOG NUMBERS ..............................................................................230 GLOSSARY ...............................................................................................236 5 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers 6 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbering Section 1—Catalog Numbering PowerPact™ with Micrologic™ Circuit Breakers The PowerPact H-, J-, and L-frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. H- and J-frame circuit breakers are available with either thermal-magnetic or Micrologic electronic trip units. L-frame circuit breakers are available with Micrologic electronic trip unit. Direct Access to Energy Management The new generation PowerPact with Micrologic circuit breakers set the standard with direct access to energy management. Integrated metering enhances their protective functions. For the first time, Schneider Electric™ users can monitor energy from 15 to 3000 A, offering new performance in a remarkably compact device. • • • Smart – A meter in every breaker Safe – Combines safety and performance in one compact device Simple – To select, install, and use Increased energy availability Safety and Protection Energy measurement and control 7 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbering Catalog Numbering – J L L 3 6 250 Frame Poles Amperage H H-Frame J J-Frame L L-Frame 2 2P 3 3P 4 4P 060 100 150 250 400 600 000 Terminations Brand _ Square D N Schneider Electric L M P F A S N D K Lugs Line/Load Side Lugs Line Side Lugs Load Side Bus Bar I-Line Rear Connected Plug-in Drawout Reverse I-Line W T – –––– Accessory Suffix Code (See Table 2) I-Line Phasing 60 A 100 A 150 A 250 A 400 A 600 A Switch or Frame only Voltage 6 600 Vac 4 480 Vac Trip Unit — ABC (3P) 6 CBA (3P) 1 AB (2P) 2 AC (2P) 3 BA (2P) 4 BC (2P) 5 CA (2P) 6 CB (2P) Micrologic Electronic Trip Units U31X LI Standard Protection U33X LSI Standard Protection U43X LSI plus Ammeter U44X LSIG plus Ammeter U53X LSI plus Energy Management U54X LSIG plus Energy Management M37X Magnetic Only (L-Frame Only) M38X Motor Protector Circuit Breaker S40X 400 A Molded Case Switch (L-Frame Automatic Switch) S60X 600 A Molded Case Switch (L-Frame Automatic Switch) F40 400 A L-Frame Only (No Trip Unit) F60 600 A L-Frame Only (No Trip Unit) Performance Level (kA) (See Table 1) Thermal-Magnetic Trip Units Mission Critical (J- and L-frame with D, G, J, and L interrupting ratings) — Standard Fixed Trip Unit (Suitable for reverse connection) F06 60 A H-Frame Only (No trip unit) F15 150 A H-Frame Only (No trip unit) F25 250 A J-Frame Only (No trip unit) T Complete Circuit Breaker (Frame + removable trip unit) S15 150 A Molded Case Switch (H-Frame automatic switch) S17 175 A Molded Case Switch (J-Frame automatic switch) S25 250 A Molded Case Switch (J-Frame automatic switch) C 100% Rated Continuous Current Rating1 M71 30 A H-Frame Motor Circuit Protector (MCP) M72 50 A H-Frame Motor Circuit Protector (MCP) M73 100 A H-Frame Motor Circuit Protector (MCP) M74 150 A H-Frame Motor Circuit Protector (MCP) M75 250 A J-Frame Motor Circuit Protector (MCP) D81 500 Vdc 150–175 A J-Frame Molded Case Circuit Breaker D82 500 Vdc 200–250 A J-Frame Molded Case Circuit Breaker R 100% Rated Continuous Current Rating Complete Circuit Breaker (Frame + removable trip unit) 1 Table 1: 100% ratings valid for: 3P H/J frame unit mount only 3P/4P L-frame 250 A and 400 A unit mount 3P L-frame 250 A and 400 A I-Line Interrupting Rating UL® / CSA® / NOM® 240 Vac 480 Vac 600 Vac 250 IEC 647-2 Icu/Ics Vdc1 500 Vdc2 220/240 Vac 380/440/415 Vac 500/525 Vac 690 Vac 250 Vdc1 500 Vdc3 D 25 kA 18 kA 14 kA 20 kA — 25/25 kA 18/18 kA 14/14 kA — 20 kA 20 kA G 65 kA 35 kA 18 kA 20 kA 20 kA 65/65 kA 35/35 kA 18/18 kA — 20 kA 20 kA J 100 kA 65 kA 25 kA 20 kA — 100/100 kA 65/65 kA 25/25 kA — 20 kA 20 kA L 125 kA 100 kA 50 kA 20 kA — 125/125 kA 100/100 kA 50/50 kA — 20 kA 20 kA R 200 kA 200 kA 100 kA — — 150 kA 125 kA 75 kA 20 kA — — 1 250 Vdc ratings only available with PowerPact H or J circuit breakers with thermal-magnetic trip units (not including MCP). 2 UL 500 Vdc ratings only available with PowerPact J circuit breakers with thermal-magnetic trip units (not including MCP). 3 IEC 500 Vdc rating only available on PowerPact J-frame circuit beakers. 8 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbering Table 2: Factory Installed Accessory Suffix Codes (Building Sequence as Listed) and Field-Installable Kit Number (1) Communication Networks1 Suffix EA EB ED EE EG4 EH4 EK4 EL4 EN Description NSX Cord 1.3 m, V 480 V NSX Cord 3 m, V 480 V NSX Cord 1.3 m, V > 480 V NSX Cord 3 m, V > 480 V BSCM + NSX Cord 1.3 m, V 480 V BSCM + NSX Cord 3 m, V 480 V BSCM + NSX Cord 1.3 m, V > 480 V BSCM + NSX Cord 3 m, V > 480 V 24 Vdc Power Supply Terminal Block Kit No. S434201 S434202 S434204 S434303 S434201BS S434202BS S434204BS S434303BS S434210 (2) Indication Contacts Suffix V Description SDX SDTAM (motor only trip units) Kit No. S429532 S429424 Contacts 1A/1B Standard 2A/2B Standard 3A/3B Standard (L-frame only) 1A/1B Low-Level 2A/2B Low-Level 3A/3B Low Level (L-frame only) Kit No. S29450 S29450 S29450 S29452 S29452 S29452 Kit Qty. 1 2 3 1 2 3 (4) Alarm/Overcurrent Trip Switch Suffix Switch Kit No. Kit Qty. PowerPact L-Frame and PowerPact H/J-Frame with Micrologic 5/6 trip units BC Alarm Switch S29450 1 BH Alarm Switch Low-Level S29452 1 1 Overcurrent Trip Switch, Standard S29450 BD SDE Actuator S29451 1 BJ Overcurrent Trip Switch, Low-Level SDE Actuator S29452 S29451 1 1 BE Alarm Switch and Overcurrent Trip Switch, Standard S29450 2 BK Alarm Switch and Overcurrent Trip Switch, Low-Level S29452 2 PowerPact H/J-Frame with Thermal-Magnetic or Micrologic 1/2/3 trip units BC Alarm Switch S29450 BH Alarm Switch Low-Level S29452 1 1 H-Frame S429441 J-Frame S431549 L-Frame S432652 H-Frame S29440 S29433 S29434 — S29435 S29436 S29437 S29438 S29439 J-Frame S31548 S31540 S31541 — S31542 S31543 S31544 S31545 S31546 L-Frame S432639 S432640 S432641 S432642 S432647 S432643 S432644 S432645 S432646 H/J-Frame S29337 S29339 S29338 L-Frame S32597 S32599 S32598 RT10 Handle Type (color) Direct Mount (black) Direct Mount (red) Extended Door Mount (black) Telescoping (black) S29343 S32603 RE20 Extended Door Mount (red) S29340 S32600 (7) Motor Operator Suffix ML MA MD MF MH MO MV MR MS Voltage 48/60 Vac 120 Vac 277 Vac 380/415 Vac 440/480 Vac 24/30 Vdc 48/60 Vdc 110/130 Vdc 250 Vdc (8) Rotary Handle Suffix RD10 RD20 RE10 (9) Wire Harnesses2 S434503 MX Wire Harness Motor Operator Wire Harness S434504 S434506 YH1 Communicating Motor Operator Wire Harness S434507 YH13 YH4 YH13 NSX Wire Harness ENCT and ZSI Wire Harnesses 24 Vdc Power Supply Wire Harness S434508 — S434505 1 1 Alarm Switch and Overcurrent Trip Switch, Standard S29450 2 SDE Actuator S29451 5 Voltage 220/240 Vac MN Wire Harness S29452 S29451 4 Suffix NC YH1 YH1 Overcurrent Trip Switch, Low-Level SDE Actuator 3 24 Vac 48 Vac 120 Vac 208/277 Vac 380/480 Vac 525/600 Vac 12 Vdc 24 Vdc 30 Vdc 48 Vdc 60 Vdc 125 Vdc 250 Vdc YH1 BJ 2 Kit No. S29404 S29405 S29406 S29407 S29408 S29409 S29402 S29410 S29411 S29412 S29403 S29413 S29414 1 BD 1 1 1 Suffix UK UL UA UD UH UJ UN UO UU UP UV UR US Kit No. S29384 S29385 S29386 S29387 S29388 S29389 S29382 S29390 S29391 S29392 S29383 S29393 S29394 Harness2 ZSI Wire Harness, H/J Frame ZSI Wire Harness, L-Frame ENCT Wire Harness OF Wire Harness SD/SDE Wire Harness SDx/SDTAM Wire Harness S29450 S29451 BK Suffix SK SL SA SD SH SJ SN SO SU SP SV SR SS Suffix YH3 YH3 YH2 YH1 YH1 YH1 Overcurrent Trip Switch, Standard SDE Actuator BE (6) Undervoltage Release Voltage UVR (6) Communicating Motor Operator5 (3) Auxiliary Switch Suffix AA AB AC AE AF AG (5) Shunt Trip Alarm Switch and Overcurrent Trip Switch, Low-Level S29452 2 SDE Actuator S29451 1 Except for 24 Vdc Power Supply Terminal Block, installation requires IFM (STRV00210) for Modbus communication and/or FDM (STRV00121) for external display. YH1 = all installed accessories but ZSI and ENCT YH2 = ENCT and all installed accessories YH3 = ZSI and all installed accessories YH4 = ZSI, ENCT and all installed accessories I-Line wire harness included for communication network accessories. Optional wire harness for unit mount requires YH1 suffix. If using with a motor operator, requires Communicating Motor Operator (suffix NC). Requires Micrologic trip unit U43, U44, U53, or U54 and communication accessories EG, EH, EK, or EL. Kit No. S434300 S434301 S434302 S434500 S434501 S434502 (10) Handle Padlocks Suffix YP YQ YQ Padlock Type Handle Padlock, ON or OFF Handle Padlock, OFF Only Handle Padlock, OFF Only 2P H/J-Frame S29371 S37422 H2PHLA L-Frame S32631 NJPAF — 9 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Section 2—General Information The PowerPact™ H-, J-, and L-frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. H- and J-frame circuit breakers are available with either thermal-magnetic or Micrologic™ electronic trip units. L-frame circuit breakers are available with Micrologic electronic trip unit. H- and J-frame circuit breakers with thermal-magnetic trip units contain individual thermal (overload) and instantaneous (short circuit) sensing elements in each pole. The amperage ratings of the thermal trip elements are calibrated at 104°F (40°C) free air ambient temperature. Per the National Electric Code® (NEC®) and the Canadian Electrical Code, standard circuit breakers may only be applied continuously at up to 80% of their rating. Circuit breakers rated for 100% operation are available but require specially-designed enclosures, copper lugs, and 194°F (90°C) rated wire. Devices with the Micrologic electronic trip unit provide adjustable protection settings for greater system flexibility. In addition to electronic protection, Micrologic trip units allow users to monitor both energy and power. Through direct access to in-depth information and networking using open protocols, PowerPact circuit breakers with Micrologic trip units let operators optimize the management of their electrical installations. Far more than a circuit breaker, these circuit breakers are a measurement and communication tool ready to meet energy-efficiency needs through optimized power requirements, increased energy availability, and improved installation management. Applications PowerPact H-, J-, and L-frame circuit breakers offer high performance and a wide range of interchangeable trip units to protect most applications. Electronic trip units provide highly accurate protection with wide setting ranges and can integrate measurement, metering and communication functions. They can be combined with the front display module (FDM121) to provide functions similar to a power meter. Table 3: Applications Power Meter PowerPact H-, J-, and L-frame circuit breakers equipped with Micrologic 5 / 6 trip units offer type A (ammeter) or E (energy) metering functions as well as communication capability. Using Micrologic trip unit sensors and intelligence, PowerPact H-, J-, and L-frame circuit breakers provide access to measurements of all the main electrical parameters on the built-in screen, on a dedicated front display module (FDM121) or through the communication network. Operating assistance Integration of measurement functions provides operators with operating assistance functions including alarms tripped by user-selected measurement values, time-stamped event tables and histories, and maintenance indicators. Front display module The main measurements can be read on the built-in screen of Micrologic 5 / 6 trip units. They can also be displayed on the equipment FDM121 along with pop-up windows signalling the main alarms. Communication Network PowerPact H-, J-, and L-frame circuit breakers equipped with Micrologic 5 / 6 trip units provide communication capabilities. Simple RJ45 cables connect to a Modbus communication interface module. 10 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Table 3: Applications G The PowerPact H-, J-, and L-frame circuit breakers provide protection against short circuits and overloads for: Protection of distribution systems 5 .2 E .9 5 .9 6 .9 7 .9 4 .9 3 .9 8 .9 2 .9 % Ir 1 Ir ( x Io ) 4 5 3 6 2 .5 8 2 10 1 .5 x Is d( M icor lo g ic 0 >11 >30 A >30 Ir ) Mission critical applications .9 4 . 9 5 .9 6 .9 7 .9 3 They are easily installed at all levels in distribution systems, from the main LV switchboard to the subdistribution boards and enclosures. All PowerPact circuit breakers can protect against insulation faults by adding an external Vigirex relay. The PowerPact H-, J-, and L-frame mission critical circuit breakers provide high levels of selective coordination with QO and ED/EG/EJ circuit breakers. The PowerPact H-, J-, and L-frame circuit breakers include a number of versions to protect motor applications: 5 .2 E 0 >11 % Ir distribution systems supplied by transformers distribution systems supplied by engine generator sets .9 8 .9 2 .9 1 Ir ( x 4 Io ) 5 3 6 2 .5 8 2 10 1 .5 x Is d( M icor lo g ic >30 A >30 • • Ir ) • 0 >11 % Ir .9 4 .9 5 . 9 6 .9 7 .9 3 .9 8 .9 2 .9 1 Ir ( x 4 Io ) 5 3 6 2 .5 8 2 10 1 .5 x Is d( The PowerPact H-, J-, and L-frame circuit breakers offer a number of version for special protection applications: M icor lo g ic >30 A >30 5 .2 E Protection of motors basic short-circuit protection with electronic instantaneous only MCP or the electronic Micrologic 1.3 M trip units, combined with a special overload relay to provide thermal protection • protection against overloads, short circuit and phase unbalance or loss with Micrologic 2 M trip units The exceptional limiting capacity of the PowerPact circuit breakers automatically provides coordination with the motor starter. Ir ) Protection of special applications • • Control using automatic switches industrial control panels with: — compliance with international standards IEC 60947-2 and UL 508/CSA 22.2 N°14 —compliance with UL 489 — installation in universal and functional enclosures 400 Hz systems An automatic switch version of PowerPact H-, J-, and L-frame circuit breakers is available for circuit control. All add-on functions for the circuit breakers may be combined with the basic automatic switch function, including motor operators. For information on other automatic switches, contact Schneider Electric. Main Alternate To ensure a continuous supply of power, some electrical installations are connected to two power systems: G U . 9 5 .9 6 .9 7 .9 8 .9 2 .9 4 Io ) 5 6 8 10 1 .5 >30 1 Ir ( x 3 2 x Is d( Ir ) A >30 0 >11 % Ir .9 4 .9 5 .9 6 .9 7 .9 3 • • the normal source, usually the utility (U) a replacement source to supply the installation when the normal source is not available, generally from a generator (G) 5 .2 E .9 4 .9 3 2 .5 .9 8 .9 2 .9 1 Ir ( x 4 Io ) 5 3 6 2 .5 8 2 10 1 .5 x Is d( M icor lo g ic 0 >11 % Ir M icor lo g ic >30 A >30 5 .2 E Manual transfer systems Ir ) A mechanical and/or electrical interlocking system between two circuit breakers or automatic switches avoids all risk of parallel connection of the sources during switching. A system can be manual transfer mechanical device interlocking. 11 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Mission Critical Circuit Breakers The PowerPact™ J- and L-Frame Mission Critical circuit breakers deliver high levels of selective coordination in a flexible design that can be easily configured for a variety of applications. Tested to be selectively coordinated with the QO™ family of miniature circuit breakers and the ED, EG, and EJ circuit breakers, this solution provides peace of mind when power availability is critical. An electronic trip unit provides adjustable long-time settings in three sensor sizes, allowing coverage from 70 through 600 A on 120-240, 208Y/120, 240, and 480Y/277 V systems. Ratings UL 489 Listed CSA Certified Voltage: 480Y/277 V Available Configurations • • • • • I-Line mounting Main circuit breaker in NQ and NF panelboards Unit mount for OEM users Plug-in base for OEM users Drawout base for OEM users In addition to unique design attributes, the PowerPact Mission Critical circuit breakers have also undergone rigorous testing procedures to certify the coordination with downstream circuit breakers— combining innovative engineering with validated test results. Apply Schneider Electric Mission Critical circuit breakers in emergency power distribution systems, data centers, hospitals, or anywhere continuity of service is desired. Theory of Operation There are several dynamic forces between the PowerPact Mission Critical circuit breakers and downstream circuit breakers when a fault occurs downstream of the branch circuit breaker. Many of these events cannot be shown on the trip curve. The PowerPact Mission Critical circuit breakers analyze the fault current to make decisions which maximize selectivity with downstream circuit breakers. The trip units deploy a special selectivity delay to allow downstream circuit breakers to clear. However, on very high faults or if the downstream circuit breaker does not trip, the circuit breaker trips the mechanism instantaneously. The combination of the PowerPact Mission Critical circuit breaker and downstream circuit breakers shown in the selectivity charts in the instruction bulletin are selective due to the fact that the series impedance and the let-through from the downstream circuit breaker does not produce enough energy to trip the PowerPact Mission Circuit circuit breaker. This system maximizes the interaction of the circuit breakers in series to allow selectivity. Trip Units and Trip Curves The PowerPact J- and L-Frame Mission Critical circuit breakers deliver high levels of selective coordination with the QO™ family of miniature circuit breakers and the ED, EG, and EJ circuit breakers in a flexible design that can be easily configured for a variety of applications. These circuit breaker can be equipped with 3.2-W, 3.2S-W, 5.2A-W, 5.2E-W, 6.2A-W, 3.3S-W, 5.3A-W, 6.3A-2, and 6.3E-2 Micrologic trip units. See the catalog numbers and references beginning in Table 17. The mission critical trip units have the same settings and trip curves as the standard trip units as described in this document. For more information see the trip unit user guides 48940-310-01 and 48940-312-01 on the Schneider Electric website. 12 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information J-frame mission critical circuit breakers are selective with QO or E-frame circuit breakers per Table 4 when the amperage of the main circuit breaker is at least two times the amperage of the branch circuit breaker. Table 4: J-Frame Selectivity with QO and E-Frame Circuit Breakers1 Circuit Breaker Main Branch Voltage Current One-Line Diagram 240/120 V 120 V 15 kA 10–30 A J–W, 250 A QO(B) QO(B)-H QO(B)-VH QH J–W, 250 A E-Frame 1P, 2P 35–60 A 70–125 A 12 kA 10–30 A 3P 35–60 A 13 kA 10 kA 15–125 A 240 V 18 kA 15–60 A 10 kA 1P, 2P, 3P J-Frame Mission Critical Circuit Breaker 15 kA 240 V 208 V 70–125 A 70–125 A 1 18 kA 480Y/277 V Load QO 20 A 1P FAULT QO 100 A 2P 7 kA Load Including AFI, CAFI, EPD and GFI circuit breakers. L-frame mission critical circuit breakers are selective with QO-style and E-frame circuit breakers per Table 5 when the amperage of the main circuit breaker is at least two times greater than the amperage of the branch circuit breaker. Table 5: L-Frame Selectivity with QO and E-Frame Circuit Breakers1 Circuit Breaker Voltage Current Main Branch L–W, 250 A QO(B) 10–60 A QO(B)-H QO(B)-VH 70–125 A QH 240 V QO(B) QO(B)-H 15–150 A QO(B)-VH QH 240 V 30 kA 240 V 30 kA 480Y/277 30 kA L–W, 400 A L–W, 600 A L–W, 250 A L–W, 400 A L–W, 600 A E-Frame 15–125 A One-Line Diagram 18 kA 10 kA L-Frame Mission Critical Circuit Breaker QO 20 A 1P FAULT QO 100 A 2P 1 Load Load Including AFI, CAFI, EPD and GFI circuit breakers. 13 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Flexible Configurations The PowerPact H-, J- and L-frame circuit breakers may be configured with lugs, bus bar connections, rear connections, I-Line™, drawout cradle, or plug-in base. Field Installable Accessories and Trip Units Figure 1: Field Installable Accessories and Trip Units 14 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information General Characteristics Faceplate Label PowerPact TM A HD 150 B Circuit Breaker Interuptor Automático Disjoncteur Characteristics indicated on the faceplate label: A. Circuit breaker type B. Circuit breaker disconnector symbol C. Performance levels HDA36100 C Interrupting Rating UL CSA Valor de Interrupción NEMA Valeur d’interruption NOM (V) (kA) 240 25 50/50 Hz 480 18 600 14 240 1Ø - 3Ø 42 480 1Ø - 3Ø 18 250 20 AIR/Anom.I IEC 60947-2 AS 50/60 Hz BS Ue Icu Ics CIE (V) (kA) (kA) UNE 220/240 25 25 UTE 380/440 18 18 VDE 400/525 14 14 Ui 750V Uimp 8kV D D. Standards E. Ue: Operating voltage per IEC F. Icu: Ultimate breaking capacity per IEC E G. Ics: Service breaking capacity per IEC F H. Uimp: Rated impulse withstand voltage per IEC G H I. Ui: Insulation voltage per IEC J. Certification marks NOTE: When the circuit breaker is equipped with an extended rotary handle, the door must be opened to view the faceplate. I LISTED C.B. Issue No. 186 E10027 153555 MR J Codes and Standards H-, J-, and L-frame circuit breakers, automatic switches and electronic motor circuit protectors are manufactured and tested in accordance with the following standards. NOTE: Apply circuit breakers according to guidelines detailed in the National Electric Code (NEC) and other local wiring codes. Table 6: Codes and Standards (Domestic) PowerPact H-, J-, and L-Frame Circuit Breakers H-, J-, and L-Frame Switches PowerPact H-, J-, and L-Frame Motor Circuit Protectors UL 4891 UL 4893 UL 508 IEC 60947-2 IEC 60947-3 IEC 60947-2 CSA C22.2 No. 52 CSA C22.2 No. 54 CSA C22.2 No. 14 Federal Specification W-C-375B/GEN Federal Specification W-C-375B/GEN NEMA AB1 NEMA AB1 NEMA AB1 CCC NMX J-266 NMX J-266 CE Marking CCC CE Marking CE Marking 1 PowerPact H- and J-frame circuit breakers are in UL File E10027. PowerPact L-frame circuit breakers are in UL File E63335. 2 PowerPact H- and J-frame circuit breakers are in CSA File LR40970. PowerPact L-frame circuit breakers are in CSA File 69561. 3 PowerPact H- and J-frame switches are in UL File E87159. 4 PowerPact H- and J-frame switches are in CSA File LR32390. 15 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Vibration PowerPact H-, J-, and L-frame devices resist mechanical vibration. Tests are carried out in compliance with standard UL 489 SA and SB for the levels required by merchant-marine inspection organizations (Veritas, Lloyd's, etc.): PowerPact H-, J-, and L-frame circuit breaker meet IEC 60068-2-6 for vibration: — 2.0 to 25.0 Hz and amplitude +/- 1.6 mm — 25.0 to 100 Hz acceleration +/- 4.0 g Excessive vibration may cause tripping, breaks in connections or damage to mechanical parts. Electromagnetic disturbances PowerPact H-, J-, and L-frame devices are protected against: • • overvoltages caused by circuit switching • • devices emitting radio waves (radios, walkie-talkies, radar, etc.) overvoltages caused by an atmospheric disturbances or by a distribution-system outage (such as from failure due to lightning) electrostatic discharges produced directly by users PowerPact H-, J-, and L-frame devices have successfully passed the electromagnetic-compatibility tests (EMC) defined by the following international standards: • IEC/EN 60947-2: Low-voltage switchgear and controlgear, part 2: Circuit breakers: — Annex F: Immunity tests for circuit breakers with electronic protection — Annex B: Immunity tests for residual current protection • • • • • • IEC/EN 61000-4-2: Electrostatic-discharge immunity tests IEC/EN 61000-4-3: Radiated, radio-frequency, electromagnetic-field immunity tests IEC/EN 61000-4-4: Electrical fast transient/burst immunity tests IEC/EN 61000-4-5: Surge immunity tests IEC/EN 61000-4-6: Immunity tests for conducted disturbances induced by radio frequency fields CISPR 11: Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment. These tests ensure that: • • no nuisance tripping occurs tripping times are respected Tropicalization The materials used in PowerPact circuit breakers will not support the growth of fungus and mold. PowerPact circuit breakers have passed the test defined below for extreme atmospheric conditions. Dry cold and dry heat: — IEC 68-2-1–dry cold at -55 °C — IEC 68-2-2–dry heat at +85° C Damp heat (tropicalization) — IEC 68-2-30–damp heat (temperature + 55° C and relative humidity of 95%) — IEC 68-2-52 level 2–salt mist 16 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Special Ratings The H-frame and J-frame circuit breakers also comply with the following special ratings: • • • HACR rating SWD switch duty rating (applies only to 15 and 20 A / 277 Vac or less, 2P and 3P) HID high intensity discharge lighting rating (15–50 A) The L-frame circuit breakers complies with the following special rating: • HACR rating Marine Ratings UL Marine Listed/CSA Certified Circuit Breakers (UL 489 Supplement SA) The PowerPact H- and J-frame circuit breakers with thermal-magnetic trip units with D, G, J and L interruption levels meet the UL 489 Supplement SA requirements for use on vessels of any length under or over 65 ft. (19.8 m). The PowerPact H-, J-, and L-frame circuit breakers with Micrologic electronic trip units meet the UL 489 Supplement SA for use on vessels over 65 ft. (19.8 m) in length. Marine circuit breakers must not use aluminum or aluminum alloys for terminal connections and must be calibrated at an ambient temperature of 104° F (40° C). Standard circuit breakers should not be specified or used in the place of marine rated circuit breakers. Circuit breakers can be ordered with the Marine SA listing by adding the suffix “YA” (marine) to the catalog number. UL Naval Listed/CSA Certified Circuit Breakers (UL 489 Supplement SB) The PowerPact H-, J-, and L-frame circuit breakers with Micrologic trip units with D, G, J and L interruption levels meet the UL 489 Supplement SB requirements for use on naval vessels. These circuit breakers are subject to various vibration tests as described in UL 489 Supplement SB. Naval circuit breakers must not use aluminum or aluminum alloys for terminal connections and must be calibrated at an ambient temperature of 122° F (50° C). Standard circuit breakers should not be specified or used in the place of navel rated circuit breakers. Circuit breakers can be ordered with the Naval SB listing by adding the suffix “YA1” (naval) to the catalog number. American Bureau of Shipping (ABS) The PowerPact H-, J-, and L-Frame circuit breakers are certified to ABS-NVR (American Bureau of Shipping - Naval Vessel Rules), for use on Naval vessels. 17 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information UL 489 SC Listed 500 Vdc Circuit Breakers The UL Listed/CSA Certified thermal-magnetic J-Frame molded case circuit breakers are specifically designed for use on ungrounded dc systems having a maximum short-circuit voltage of 500 Vdc or a maximum floating (unloaded) voltage of 600 Vdc. The circuit breakers are suitable for use only with UPS (uninterruptable power supplies) and ungrounded systems. This two-level voltage rating allows these circuit breakers to be applied to battery sources having a short-circuit availability of 20,000 amperes at 500 Vdc. These circuit breakers are UL Listed/CSA Certified for the interrupting ratings shown only if applied with three poles connected in series (series connection is external to circuit breaker). See diagram below. CAUTION/PRECAUCION/ ATTENTION Connect only as shown/Conectar solo asi/ Francher seulement comme suit: 300 V 300 V 600 V MAX. or MAX. MAX. o ou Load/Carga/ Charge Load/Carga/ Charge Source = 600 Vdc max. (floating) 500 Vdc max. (loaded) NOTE: Due to external series connection, I-Line circuit breakers are not available for this application. Table 7: Ampere Rating DC Molded Case Circuit Breakers Circuit Breaker Cat. No. Adjustable Magnetic Trip Range—DC Amperes Performance Level @ 500 Vdc Low High 100 A JGL37100D81 400 600 125 A JGL37125D81 400 600 150 A JGL37150D81 400 600 175 A JGL37175D81 400 600 200 A JGL37200D82 500 850 225 A JGL37225D82 500 850 250 A JGL37250D82 500 850 20 k AIR 20 k AIR 18 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Table 8: Circuit Breakers Circuit Breaker 150 A H-Frame Circuit Breaker Type HD HG HJ Number of poles1 2, 3 Amperage Range (A) 15-150 250 A J-Frame HL HR JD JG JJ 3 JL 2, 3 400 A L-Frame LD LG LJ 3 3, 4 3, 4 70-400 200-600 70-250 LL 600 A L-Frame JR LR LD LG LJ LL LR UL 489 Circuit Breaker Ratings 240 Vac 25 65 100 125 200 25 65 100 125 200 25 65 100 125 200 25 65 100 125 200 480 Vac 600 Vac 18 35 14 18 65 25 100 200 18 35 65 50 100 14 18 25 100 200 18 35 65 50 100 14 18 25 100 200 18 35 65 50 100 14 18 25 100 200 50 100 250 Vdc2 20 20 --- --- 20 --- 20 --- 20 --- ----- ----- 220/240 Vac 25 65 100 125 150 25 65 100 125 150 25 65 100 125 150 25 65 100 125 150 380/415 Vac 18 35 65 100 125 18 35 65 100 125 18 35 65 100 125 18 35 65 100 125 Ultimate breaking capacity (Icu) 440/480 Vac 500/525 Vac 18 35 14 18 65 25 100 125 18 35 65 50 75 14 18 25 100 125 18 35 65 50 75 14 18 25 100 125 18 35 65 50 75 14 18 25 100 125 50 754 (kA rms) 690 Vac --- --- --- --- 20 --- --- --- --- 20 --- --- --- --- 20 --- --- --- --- 20 250 Vdc2 --- --- --- --- --- 20 20 20 20 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 20 20 20 20 --- --- --- --- --- --- --- --- --- --- --- UL/CSA/NOM (kA rms) 500 Vdc2, 3 ----- 20 20 20 --- 20 --- ----- --- --- ----- --- --- ----- --- --- ----- --- --- ----- IEC 947-2 Circuit Breaker Ratings 500 Vdc2, 3 Service breaking capacity (Ics) % Icu Insulation Voltage Vi 100% 100% 100% 100% 750 Vac 750 Vac 750 Vac 750 Vac Impulse Withstand Voltage Vimp 8 kVac 8 kVac 8 kVac 8 kVac Operational Voltage Ve 690 Vac 690 Vac 690 Vac 690 Vac Sensor Rating In Utilization Category --- 150 A A 250 A A 400 A A 600 A A 4000 4000 5000 1000 5000 1000 5000 1000 Operations (Open-Close Cycles) Without Current With Current Protection and Measurements Short-circuit protection Magnetic only Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ --- --- --Ŷ Ŷ Ŷ --Ŷ --Ŷ --- --- --Ŷ Ŷ Ŷ --Ŷ --Ŷ with neutral protection (Off-0.5-1-OSN)5 Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Front display module (FDM121) Operating assistance Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Counters Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Histories and alarms Metering Com Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Device status/control com Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Thermal-magnetic Electronic Overload/short-circuit protection with ground fault protection with zone selective interlocking (ZSI)6 Display / I, V, f, P, E, THD measurements / interrupted-current measurement Options Ŷ Ŷ Ŷ Ŷ Dimensions / Weight / Connections Dimensions 3P (Unit Mount) in. (mm) Height Width 6.4 (163) 4.1 (104) 7.5 (191) 4.1 (104) 13.38 (340) 5.51 (140) 13.38 (340) 5.51 (140) Depth 3.4 (86) 3.4 (86) 4.33 (110) 4.33 (110) Unit Mount 4.8 (2.2) Ŷ 5.3 (2.4) Ŷ 13.2 (6.0) Ŷ 13.7 (6.2) Ŷ I-Line Rear Connection Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Plug-In Drawout Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Ŷ Optional Lugs Ŷ Ŷ Ŷ Ŷ Weight 3P - lb. (Kg) Connections / Terminations 1 H and J-frame breakers with Micrologic trip units available only with 3P. The HJ, HL and the J-Frame 2P breakers are 3P modules. 2 DC not available with PowerPact H, J or L-frame circuit breakers with Micrologic trip units. 3 500 Vdc specific catalog numbers, ungrounded UPS systems only. 4 Ics for 600 A L-frame circuit breaker at 525 V is 19 kA. 5 OSN: Over Sized Neutral protection for neutrals carrying high currents (e.g. 3rd harmonics). 6 ZSI using restraint wires. 19 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information PowerPact H-, J-, and L-frame Circuit Breaker Trip Units Table 9: Micrologic Trip Unit Features Micrologic Trip Unit (X = Standard Feature, O = Available Option Features Standard 3.2/3.3 LI Ammeter 3.2S/3.3S 5.2A/5.3A X X Energy 6.2A/6.3A 5.2E/5.3E 6.2E/6.3E X LSI1 X LSIG/Ground Fault Trip2 X Ground-Fault Alarm Trip X X X Current Settings Directly in Amperes X X X X X X True RMS Sensing X X X X X X UL Listed X X X X X X Thermal Imaging X X X X X X LED for Long-Time Pickup X X X X X X LED for Long-Time Alarm X X X X X X LED Green “Ready” Indicator X X X X X X Up to 12 Alarms Used Together X X X X Digital Ammeter X X X X Zone-Selective Interlocking3 Communications O O X X X X O O O O LCD Display X X X X Front Display Module FDM121 O O O O Advanced User Interface X X X X Neutral Protection X X X X Contact Wear Indication4 X X X X Incremental Fine Tuning of Settings X X X X Load Profile4, 5 X X X X Power Measurement X X Power Quality Measurements X X 1 The LSI with 3.2S/3.3S trip units have fixed short time and long time delays. 2 Requires neutral current transformer on three-phase four-wire loads. 3 ZSI for H/J-frame devices is only IN. ZSI for L-frame devices is IN and OUT. 4 Indication available using the communication system only. 5 % of hours in 4 current ranges: 0–49%, 50–79%, 80–89%, and >90% In. Thermal-Magnetic or Electronic Trip Unit? Thermal-magnetic trip units (available on H- and J-frame circuit breakers only) protect against overcurrents and short-circuits using tried and true techniques. For applications requiring installation optimization and energy efficiency, electronic trip units offering more advanced protection functions combined with measurements. Trip units using digital electronics are faster as well as more accurate. Wide setting ranges make installation upgrades easier. Designed with processing capabilities, Micrologic trip units can provide measurement information and device operating assistance. With this information, users can avoid or deal more effectively with disturbances and can play a more active role in system operation. They can manage the installation, anticipate events and plan any necessary servicing. 20 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers General Information Accurate Measurements for Complete Protection PowerPact H-, J-, and L-frame circuit breakers devices offer excellent measurement accuracy from 15 amperes on up to the short-circuit currents. This is made possible by a new generation of current transformers combining “iron-core” sensors for self-powered electronics and “air core” sensors (Rogowski coils) for measurements. The protection functions are managed by an ASIC (Application Specific Integrated Circuit) component that is independent of the measurement functions. This independence ensures immunity to conducted and radiated disturbances and increases reliability. Numerous Security Functions Torque-limiting screws The screws secure the trip unit to the circuit breaker. When the correct tightening torque is reached, the screw heads break off. Optimum tightening avoids any risk of temperature rise. A torque wrench is no longer required. Easy and sure changing of trip units All trip units are interchangeable, without wiring. A mechanical mismatch-protection system makes it impossible to mount a trip unit on a circuit breaker with a lower rating. “Ready” LED for a continuous self-test The LED on the front of the electronic trip units indicates the result of the self-test running continuously on the measurement system and the tripping release. As long as the green LED is flashing, the links between the CTs, the processing electronics and the tripping mechanism are operational. The circuit breaker is ready to protect. A minimum current of 15 to 50 A, depending on the device, is required for this indication function. Available on Micrologic 5 / 6 trip units, the system consists of: A patented dual adjustment system for protection functions. • • an adjustment using rotary switches sets the maximum value an adjustment using the keypad or made remotely, fine-tunes the setting. This setting may not exceed the first one. It can be read directly on the Micrologic trip unit screen, to within one ampere and a fraction of a second. 21 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Section 3—Circuit Breakers Dual-Break Rotating Contacts All PowerPact™ H-, J-, and L-frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. This reduces the let-through currents and enhances equipment protection. Reduced Let-Through Currents The moving contact has the shape of an elongated “S” and rotates around a floating axis. The shape of the fixed and moving contacts are such that the repelling forces appear as soon as the circuit reaches approximately 15 times In. Due to the rotating movement, repulsion is rapid and the device greatly limits short-circuit currents, whatever the interrupting level of the unit (D, G, J or L). The fault current is extinguished before it can fully develop. Lower let-through currents provide less peak energy, reducing the required bus bar bracing, lowering enclosure pressure, and delivering improved series or combination ratings. See page 23 for UL Current Limiting labels. High Ampere Interrupting Ratings (AIR) Circuit breakers are available with interrupting ratings up to: • • • 200 kA at 240 Vac delta 200 kA at 480 Vac delta 100 kA at 600 Vac delta. See Table 1 for additional performance levels. Internal Operating Mechanism PowerPact H-, J-, and L-frame circuit breakers have an over-center toggle mechanism providing quickmake, quick-break operation. The operating mechanism is also trip-free, which allows tripping even when the circuit breaker handle is held in the “ON” position. Internal cross-bars provide common opening and closing of all poles with a single operating handle. All PowerPact circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. This should be used as part of a regular preventive maintenance program. Push-to-Trip 22 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Handle Position Indication The circuit breaker handle can assume any of three positions, ON, tripped or OFF as shown. The center tripped position provides positive visual indication that the circuit breaker has tripped. The circuit breaker can be reset by first pushing the handle to the extreme “OFF” position. Power can then be restored to the load by pushing the handle to the “ON” position. ON Tripped OFF Circuit Breaker Ratings The interrupting rating is the highest current at rated voltage the circuit breaker is designed to safely interrupt under standard test conditions. Circuit breakers must be selected with interrupting ratings equal to or greater than the available short-circuit current at the point where the circuit breaker is applied to the system (unless it is a branch device in a series rated combination). Interrupting ratings are shown on Table 8: Circuit Breakers on page 19 and on the faceplate label on the front of the circuit breaker. Reverse Feeding of Circuit Breakers The standard unit-mount H-, J-, and L-frame circuit breakers have sealed trip units and may be reverse fed. See Tables 14–15 and 28–36 for catalog numbers. Circuit breakers with field-interchangeable trip units (designated by the suffix T and labeled “LINE” and “LOAD”) cannot be reverse fed. Neither can circuit breaker frames without terminations or trip units. Current Limiting The current limiting attributes of PowerPact H-, J-, and L-frame circuit breakers provide greater protection for downstream devices by limiting the let-through current in the event of a fault. The current-limiting capabilities of HJ/HL/HR, JJ/JL/JR, and LJ/LL/LR frame circuit breakers are documented with Underwriters Laboratories and Canadian Standards Association. These currentlimiting circuit breakers ship with a label that identifies them as UL/CSA Current Limiting Circuit Breakers. (The HD/HG, JD/JG, and LD/LG circuit breakers do not carry the UL Current Limiting label). The trip curves with let-through data are available in the trip curve section in this catalog. Please note that as let-through curves for UL Listed/CSA Certified Current-Limiting Circuit Breakers, these curves are maximum let-through values. 100% Rated Some models of the H-, J-, and L-frame circuit breakers are UL Listed/CSA Certified to be applied at up to 100% of their current rating. Because of the additional heat generated, the use of speciallydesigned enclosures, copper lugs on H- and J-frame circuit breakers, and 194°F (90°C) rated wire is required when applying circuit breakers at 100% of continuous current rating. (L-frame circuit breakers can use aluminum or copper lugs.) Markings on the circuit breaker indicate the minimum enclosure size and ventilation required. The 194°F (90°C) wire must be sized according to the ampacities of the 167°F (75°C) wire column in the NEC. Circuit breakers with 100% rating can also be used in applications requiring only standard (80%) continuous loading. 23 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers 100% ratings valid for: • • • 3P H/J-frame unit mount construction only 3P/4P L-frame 250 A and 400 A unit mount construction 3P L-frame 250 A and 400 A I-Line™ construction Corner Grounded Delta Ratings (1Ø-3Ø) Circuit breakers suitable for corner-grounded circuits are marked 1Ø-3Ø. For additional information, refer to data bulletin 2700DB0202R2/09. Table 10: Corner Grounded Delta Ratings (1Ø-3Ø) 2P H-Frame HD HJ1 Ampere Rating (A) 15–150 Voltage Rating (Vac) 240 UL Interrupting Rating (kA) 1 HG 42 42 65 2P J-Frame HL1 HR1 JD1 JG1 JJ1 JL1 JR1 100 200 150–250 240 100 200 42 42 65 Built using 3P module Figure 2: Three-Phase 240 Vac Corner-Grounded Delta System 2P Circuit Breaker Load 24 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Special Applications Protection of Industrial Control Panels PowerPact H-, J-, and L-frame circuit breakers are also used in industrial control panels. They serve as an incoming devices or can be combined with contactors to protect motor feeders: • • • compliance with worldwide standards including IEC 60947-2 and UL 508 / CSA C22.2 N°14 overload and short-circuit protection installation in universal and functional type PowerPact H-, J-, and L-frame circuit breakers equipped for motor protection functions as described in the following pages can be used in industrial control panels. The accessories for the PowerPact H-, J-, and L-frame circuit breakers are suitable for the special needs of these applications. 400 Hz Applications Micrologic™ 3.2/3, 5.2/3 A or E and 6.2/3 with A or E measurement functions are suitable for 400 Hz. The use of electronics offers the advantage of greater operating stability when the frequency varies. However the units are still subject to temperature rise caused by the frequency. The practical consequences are: • • • limit settings: see the Ir derating table below the long-time, short-time and instantaneous pick-ups are not modified (see pages 62 or 64) the accuracy of the displayed measurements is 2% (class II). Table 11: Thermal Derating Maximum Ir Setting Circuit Breaker Maximum Setting Coefficient Max Ir Setting at 400 Hz H-Frame, 150 A 0.9 135 J-Frame, 250 A 0.9 225 L-Frame, 400 A 0.8 320 L-Frame, 600 A 0.65 390 Auxiliary Switch (OF) in 400 Hz Networks Table 12: Electrical Characteristics of Auxiliary Switches Contact Standard Utilization cat. (IEC 60947-5-1) AC12 AC15 AC12 AC15 24 V 6A 6A 5A 3A 40 V 6A 6A 5A 3A 110 V 6A 5A 5A 2.5 A 200/240 V 6A 4A 5A 2A 380/415 V 6A 2A 5A 1.5 A Operational current Low Level Shunt Trip (MX) or Undervoltage Trip (MN) Voltage Release at 400 Hz and 440 V For circuit breakers on 400 Hz systems, only 125 Vdc undervoltage trip (MN) or shunt trip (MX) releases may be used. The release must be supplied by the 400 Hz system through a rectifier bridge (to be selected from the table below) and an additional resistor with characteristics depending on the system voltage. Table 13: Rectifier Bridges for MN or MX Releases Voltage Rectifier Additional Resistor 220/240 V Thomson 110 BHz or General Instrument W06 or Semikron SKB at 1.2/1.3 4.2 kȍ-5 W 380/240 V Semikron SKB at 1.2/1.3 10.7 kȍ-10 W 25 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers H- and J-Frame Catalog Numbers Unit-Mount Circuit Breaker Catalog Numbers PowerPact H-Frame 150 A Unit-Mount1 Thermal-Magnetic Circuit Breakers (600 Vac, 250 Vdc) with Factory Sealed Trip Unit (Suitable for Reverse Connection) Table 14: Current Rating @ 40 C Fixed AC Magnetic Trip Hold Trip Interrupting Rating D Standard (80%) Rated J2 G Standard 100% Rated3 (80%) Rated L2 Standard 100% Rated3 (80%) Rated 100% Rated3 Standard (80%) Rated 100% Rated3 H-Frame, 150 A, 2P, 600 Vac 50/60Hz, 250 Vdc4 15 A 350 A 750 A HDL26015 HDL26015C HGL26015 HGL26015C HJL26015 HJL26015C HLL26015 HLL26015C 20 A 350 A 750 A HDL26020 HDL26020C HGL26020 HGL26020C HJL26020 HJL26020C HLL26020 HLL26020C 25 A 350 A 750 A HDL26025 HDL26025C HGL26025 HGL26025C HJL26025 HJL26025C HLL26025 HLL26025C 30 A 350 A 750 A HDL26030 HDL26030C HGL26030 HGL26030C HJL26030 HJL26030C HLL26030 HLL26030C 35 A 400 A 850 A HDL26035 HDL26035C HGL26035 HGL26035C HJL26035 HJL26035C HLL26035 HLL26035C 40 A 400 A 850 A HDL26040 HDL26040C HGL26040 HGL26040C HJL26040 HJL26040C HLL26040 HLL26040C 45 A 400 A 850 A HDL26045 HDL26045C HGL26045 HGL26045C HJL26045 HJL26045C HLL26045 HLL26045C 50 A 400 A 850 A HDL26050 HDL26050C HGL26050 HGL26050C HJL26050 HJL26050C HLL26050 HLL26050C 60 A 800 A 1450 A HDL26060 HDL26060C HGL26060 HGL26060C HJL26060 HJL26060C HLL26060 HLL26060C 70 A 800 A 1450 A HDL26070 HDL26070C HGL26070 HGL26070C HJL26070 HJL26070C HLL26070 HLL26070C 80 A 800 A 1450 A HDL26080 HDL26080C HGL26080 HGL26080C HJL26080 HJL26080C HLL26080 HLL26080C 90 A 800 A 1450 A HDL26090 HDL26090C HGL26090 HGL26090C HJL26090 HJL26090C HLL26090 HLL26090C 100 A 900 A 1700 A HDL26100 HDL26100C HGL26100 HGL26100C HJL26100 HJL26100C HLL26100 HLL26100C 110 A 900 A 1700 A HDL26110 HDL26110C HGL26110 HGL26110C HJL26110 HJL26110C HLL26110 HLL26110C 125 A 900 A 1700 A HDL26125 HDL26125C HGL26125 HGL26125C HJL26125 HJL26125C HLL26125 HLL26125C 150 A 900 A 1700 A HDL26150 HDL26150C HGL26150 HGL26150C HJL26150 HJL26150C HLL26150 HLL26150C H-Frame, 150 A, 3P, 600 Vac 50/60Hz, 250 Vdc 15 A 350 A 750 A HDL36015 HDL36015C HGL36015 HGL36015C HJL36015 HJL36015C HLL36015 HLL36015C 20 A 350 A 750 A HDL36020 HDL36020C HGL36020 HGL36020C HJL36020 HJL36020C HLL36020 HLL36020C 25 A 350 A 750 A HDL36025 HDL36025C HGL36025 HGL36025C HJL36025 HJL36025C HLL36025 HLL36025C 30 A 350 A 750 A HDL36030 HDL36030C HGL36030 HGL36030C HJL36030 HJL36030C HLL36030 HLL36030C 35 A 400 A 850 A HDL36035 HDL36035C HGL36035 HGL36035C HJL36035 HJL36035C HLL36035 HLL36035C 40 A 400 A 850 A HDL36040 HDL36040C HGL36040 HGL36040C HJL36040 HJL36040C HLL36040 HLL36040C 45 A 400 A 850 A HDL36045 HDL36045C HGL36045 HGL36045C HJL36045 HJL36045C HLL36045 HLL36045C 50 A 400 A 850 A HDL36050 HDL36050C HGL36050 HGL36050C HJL36050 HJL36050C HLL36050 HLL36050C 60 A 800 A 1450 A HDL36060 HDL36060C HGL36060 HGL36060C HJL36060 HJL36060C HLL36060 HLL36060C 70 A 800 A 1450 A HDL36070 HDL36070C HGL36070 HGL36070C HJL36070 HJL36070C HLL36070 HLL36070C 80 A 800 A 1450 A HDL36080 HDL36080C HGL36080 HGL36080C HJL36080 HJL36080C HLL36080 HLL36080C 90 A 800 A 1450 A HDL36090 HDL36090C HGL36090 HGL36090C HJL36090 HJL36090C HLL36090 HLL36090C 100 A 900 A 1700 A HDL36100 HDL36100C HGL36100 HGL36100C HJL36100 HJL36100C HLL36100 HLL36100C 110 A 900 A 1700 A HDL36110 HDL36110C HGL36110 HGL36110C HJL36110 HJL36110C HLL36110 HLL36110C 125 A 900 A 1700 A HDL36125 HDL36125C HGL36125 HGL36125C HJL36125 HJL36125C HLL36125 HLL36125C 150 A 900 A 1700 A HDL36150 HDL36150C HGL36150 HGL36150C HJL36150 HJL36150C HLL36150 HLL36150C 1 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 2 UL Listed/CSA Certified as current limiting circuit breakers. 3 100% rated circuit breakers have copper lugs and can be used with copper wire only. 4 HD and HG circuit breakers are true 2-pole construction. 26 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 15: PowerPact J-Frame 250 A Unit-Mount Thermal-Magnetic Circuit Breakers with Factory Sealed Trip Unit (Suitable for Reverse Connection) Adjustable AC Current Magnetic Trip Rating @ 40 C Hold Trip Interrupting Rating D G J1 L1 R1 Standard 100% (80%) Rated2 Rated Standard 100% (80%) Rated2 Rated Standard 100% (80%) Rated2 Rated Standard 100% (80%) Rated2 Rated Standard 100% (80%) Rated2 Rated J-Frame, 250 A, 2P, 600 Vac 50/60Hz, 250 Vdc 150 A3 750 A 1500 A JDL26150 JDL26150C JGL26150 JGL26150C JJL26150 JJL26150C JLL26150 JLL26150C — — 175 A3 875 A 1750 A JDL26175 JDL26175C JGL26175 JGL26175C JJL26175 JJL26175C JLL26175 JLL26175C — — 200 A4 1000 A 2000 A JDL26200 JDL26200C JGL26200 JGL26200C JJL26200 JJL26200C JLL26200 JLL26200C — — 225 A4 1125 A 2250 A JDL26225 JDL26225C JGL26225 JGL26225C JJL26225 JJL26225C JLL26225 JLL26225C — — A4 1250 A 2500 A JDL26250 JDL26250C JGL26250 JGL26250C JJL26250 JJL26250C JLL26250 JLL26250C — — 250 J-Frame, 250 A, 3P, 600 Vac 50/60Hz, 250 Vdc 150 A3 750 A 1500 A JDL36150 JDL36150C JGL36150 JGL36150C JJL36150 JJL36150C JLL36150 JLL36150C JRL36150 JRL36150C 175 A3 875 A 1750 A JDL36175 JDL36175C JGL36175 JGL36175C JJL36175 JJL36175C JLL36175 JLL36175C JRL36175 JRL36175C 200 A4 1000 A 2000 A JDL36200 JDL36200C JGL36200 JGL36200C JJL36200 JJL36200C JLL36200 JLL36200C JRL36200 JRL36200C 225 A4 1125 A 2250 A JDL36225 JDL36225C JGL36225 JGL36225C JJL36225 JJL36225C JLL36225 JLL36225C JRL36225 JRL36225C 250 A4 1250 A 2500 A JDL36250 JDL36250C JGL36250 JGL36250C JJL36250 JJL36250C JLL36250 JLL36250C JRL36250 JRL36250C 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 100% rated circuit breakers have copper lugs and can be used with copper wire only. 3 Standard lug kit: AL175JD. Terminal wire range: 4–4/0 AWG Al or Cu. 4 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. 27 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 16: H-Frame 150 A and J-Frame 250 A Electronic Trip UL Rated Circuit Breakers (600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Interrupting Rating D J1 G L2 R2 Standard (80%) Rated Circuit Breakers, 3P Standard LI Standard LSI Ammeter LSI Energy LSI Ammeter LSIG Energy LSIG 3.22 3.2S2 5.2A 5.2E 6.2A 6.2E 60 A3 HDL36060U31X HGL36060U31X HJL36060U31X HLL36060U31X HRL36060U31X 100 A3 HDL36100U31X HGL36100U31X HJL36100U31X HLL36100U31X HRL36100U31X 150 A3 HDL36150U31X HGL36150U31X HJL36150U31X HLL36150U31X HRL36150U31X 250 A4 JDL36250U31X JGL36250U31X JJL36250U31X JLL36250U31X JRL36250U31X 60 A3 HDL36060U33X HGL36060U33X HJL36060U33X HLL36060U33X HRL36060U33X 100 A3 HDL36100U33X HGL36100U33X HJL36100U33X HLL36100U33X HRL36100U33X 150 A3 HDL36150U33X HGL36150U33X HJL36150U33X HLL36150U33X HRL36150U33X 250 A4 JDL36250U33X JGL36250U33X JJL36250U33X JLL36250U33X JRL36250U33X 60 A3 HDL36060U43X HGL36060U43X HJL36060U43X HLL36060U43X HRL36060U43X 100 A3 HDL36100U43X HGL36100U43X HJL36100U43X HLL36100U43X HRL36100U43X 150 A3 HDL36150U43X HGL36150U43X HJL36150U43X HLL36150U43X HRL36150U43X 250 A4 JDL36250U43X JGL36250U43X JJL36250U43X JLL36250U43X JRL36250U43X 60 A3 HDL36060U53X HGL36060U53X HJL36060U53X HLL36060U53X HRL36060U53X 100 A3 HDL36100U53X HGL36100U53X HJL36100U53X HLL36100U53X HRL36100U53X 150 A3 HDL36150U53X HGL36150U53X HJL36150U53X HLL36150U53X HRL36150U53X 250 A4 JDL36250U53X JGL36250U53X JJL36250U53X JLL36250U53X JRL36250U53X 60 A3 HDL36060U44X HGL36060U44X HJL36060U44X HLL36060U44X HRL36060U44X 100 A3 HDL36100U44X HGL36100U44X HJL36100U44X HLL36100U44X HRL36100U44X 150 A3 HDL36150U44X HGL36150U44X HJL36150U44X HLL36150U44X HRL36150U44X 250 A4 JDL36250U44X JGL36250U44X JJL36250U44X JLL36250U44X JRL36250U44X 60 A3 HDL36060U54X HGL36060U54X HJL36060U54X HLL36060U54X HRL36060U54X 100 A3 HDL36100U54X HGL36100U54X HJL36100U54X HLL36100U54X HRL36100U54X 150 A3 HDL36150U54X HGL36150U54X HJL36150U54X HLL36150U54X HRL36150U54X 250 A4 JDL36250U54X JGL36250U54X JJL36250U54X JLL36250U54X JRL36250U54X 60 A3 100 A3 150 A3 HDL36060CU31X HGL36060CU31X HJL36060CU31X HLL36060CU31X HRL36060CU31X HDL36100CU31X HGL36100CU31X HJL36100CU31X HLL36100CU31X HRL36100CU31X HDL36150CU31X HGL36150CU31X HJL36150CU31X HLL36150CU31X HRL36150CU31X 250 A4 JDL36250CU31X JGL36250CU31X JJL36250CU31X JLL36250CU31X JRL36250CU31X 60 A3 100 A3 150 A3 HDL36060CU33X HGL36060CU33X HJL36060CU33X HLL36060CU33X HRL36060CU33X HDL36100CU33X HGL36100CU33X HJL36100CU33X HLL36100CU33X HRL36100CU33X HDL36150CU33X HGL36150CU33X HJL36150CU33X HLL36150CU33X HRL36150CU33X 250 A4 JDL36250CU33X JGL36250CU33X JJL36250CU33X JLL36250CU33X JRL36250CU33X 60 A3 100 A3 150 A3 HDL36060CU43X HGL36060CU43X HJL36060CU43X HLL36060CU43X HRL36060CU43X HDL36100CU43X HGL36100CU43X HJL36100CU43X HLL36100CU43X HRL36100CU43X HDL36150CU43X HGL36150CU43X HJL36150CU43X HLL36150CU43X HRL36150CU43X 250 A4 JDL36250CU43X JGL36250CU43X JJL36250CU43X JLL36250CU43X JRL36250CU43X 60 A3 100 A3 150 A3 HDL36060CU53X HGL36060CU53X HJL36060CU53X HLL36060CU53X HRL36060CU53X HDL36100CU53X HGL36100CU53X HJL36100CU53X HLL36100CU53X HRL36100CU53X HDL36150CU53X HGL36150CU53X HJL36150CU53X HLL36150CU53X HRL36150CU53X 250 A4 JDL36250CU53X JGL36250CU53X JJL36250CU53X JLL36250CU53X JRL36250CU53X 100% Rated Circuit Breakers, 3P5 Standard Standard Ammeter Energy LI LSI LSI LSI 3.22 3.2S2 5.2A 5.2E 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 3P circuit breakers with this trip unit can be used for 2P applications. 3 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 4 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. For smaller wire range (4–4/0 AWG Al or Cu), replace the lug’s wire binding screws with the larger binding screws provided. 5 100% rated circuit breakers have copper lugs and can be used with copper wire only. 28 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 17: J-Frame 250 A Mission Critical Electronic Trip UL Rated Circuit Breakers (3P, 480Y/277 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Interrupting Rating1 D G J L Standard (80%) Rated Circuit Breakers, 3P 1 Standard LI 3.2-W 250 A JDL34250WU31X JGL34250WU31X JJL34250WU31X JLL34250WU31X Standard LSI 3.2S-W 250 A JDL34250WU33X JGL34250WU33X JJL34250WU33X JLL34250WU33X Ammeter LSI 5.2A-W 250 A JDL34250WU43X JGL34250WU43X JJL34250WU43X JLL34250WU43X Energy LSI 5.2E-W 250 A JDL34250WU53X JGL34250WU53X JJL34250WU53X JLL34250WU53X Ammeter LSIG 6.2A-W 250 A JDL34250WU44X JGL34250WU44X JJL34250WU44X JLL34250WU44X Energy LSIG 6.2E-W 250 A JDL34250WU54X JGL34250WU54X JJL34250WU54X JLL34250WU54X Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. For smaller wire range (4–4/0 AWG Al or Cu), replace the lug’s wire binding screws with the larger binding screws provided. 29 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers I-Line Circuit Breaker Catalog Numbers Table 18: Current Rating at 40°C PowerPact H-Frame 150 A I-Line Thermal-Magnetic Circuit Breakers1 with Factory Sealed Trip Unit (Suitable for Reverse Connection)2 Fixed AC Magnetic Trip Interrupting Rating3 Standard (80%) Rated Hold Trip D G J4 L4 H-Frame, 150 A, 2P, 600 Vac 50/60Hz, 250 Vdc 15 A 350 A 750 A HDA26015( ) HGA26015( ) HJA26015( ) HLA26015( ) 20 A 350 A 750 A HDA26020( ) HGA26020( ) HJA26020( ) HLA26020( ) 25 A 350 A 750 A HDA26025( ) HGA26025( ) HJA26025( ) HLA26025( ) 30 A 350 A 750 A HDA26030( ) HGA26030( ) HJA26030( ) HLA26030( ) 35 A 400 A 850 A HDA26035( ) HGA26035( ) HJA26035( ) HLA26035( ) 40 A 400 A 850 A HDA26040( ) HGA26040( ) HJA26040( ) HLA26040( ) 45 A 400 A 850 A HDA26045( ) HGA26045( ) HJA26045( ) HLA26045( ) 50 A 400 A 850 A HDA26050( ) HGA26050( ) HJA26050( ) HLA26050( ) 60 A 800 A 1450 A HDA26060( ) HGA26060( ) HJA26060( ) HLA26060( ) 70 A 800 A 1450 A HDA26070( ) HGA26070( ) HJA26070( ) HLA26070( ) 80 A 800 A 1450 A HDA26080( ) HGA26080( ) HJA26080( ) HLA26080( ) 90 A 800 A 1450 A HDA26090( ) HGA26090( ) HJA26090( ) HLA26090( ) 100 A 900 A 1700 A HDA26100( ) HGA26100( ) HJA26100( ) HLA26100( ) 110 A 900 A 1700 A HDA26110( ) HGA26110( ) HJA26110( ) HLA26110( ) 125 A 900 A 1700 A HDA26125( ) HGA26125( ) HJA26125( ) HLA26125( ) 150 A 900 A 1700 A HDA26150( ) HGA26150( ) HJA26150( ) HLA26150( ) H-Frame, 150 A, 3P, 600 Vac 50/60Hz, 250 Vdc 15 A 350 A 750 A HDA36015 HGA36015 HJA36015 HLA36015 20 A 350 A 750 A HDA36020 HGA36020 HJA36020 HLA36020 25 A 350 A 750 A HDA36025 HGA36025 HJA36025 HLA36025 30 A 350 A 750 A HDA36030 HGA36030 HJA36030 HLA36030 35 A 400 A 850 A HDA36035 HGA36035 HJA36035 HLA36035 40 A 400 A 850 A HDA36040 HGA36040 HJA36040 HLA36040 45 A 400 A 850 A HDA36045 HGA36045 HJA36045 HLA36045 50 A 400 A 850 A HDA36050 HGA36050 HJA36050 HLA36050 60 A 800 A 1450 A HDA36060 HGA36060 HJA36060 HLA36060 70 A 800 A 1450 A HDA36070 HGA36070 HJA36070 HLA36070 80 A 800 A 1450 A HDA36080 HGA36080 HJA36080 HLA36080 90 A 800 A 1450 A HDA36090 HGA36090 HJA36090 HLA36090 100 A 900 A 1700 A HDA36100 HGA36100 HJA36100 HLA36100 110 A 900 A 1700 A HDA36110 HGA36110 HJA36110 HLA36110 125 A 900 A 1700 A HDA36125 HGA36125 HJA36125 HLA36125 150 A 900 A 1700 A HDA36150 HGA36150 HJA36150 HLA36150 1 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 2 No 100% I-Line available. 3 () Indicates phasing. See “Catalog Numbering” on page 8. 4 UL Listed/CSA Certified as current limiting circuit breakers. 30 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 19: Current Rating @ 40 C PowerPact J-Frame 250A I-Line Thermal-Magnetic Circuit Breakers with Factory Sealed Trip Unit (Suitable for Reverse Connection)1 Adjustable AC Magnetic Trip Interrupting Rating2 Standard (80%) Rated Hold D Trip G J3 L3 R3 J-Frame, 250 A, 2P, 600 Vac 50/60Hz, 250 Vdc 150 A4 750 A 1500 A JDA26150( ) JGA26150( ) JJA26150( ) — — 175 A4 875 A 1750 A JDA26175( ) JGA26175( ) JJA26175( ) — — A5 1000 A 2000 A JDA26200( ) JGA26200( ) JJA26200( ) — — 225 A5 1125 A 2250 A JDA26225( ) JGA26225( ) JJA26225( ) — — 250 A5 1250 A 2500 A JDA26250( ) JGA26250( ) JJA26250( ) — — 200 J-Frame, 250 A, 3P, 600 Vac 50/60Hz, 250 Vdc 150 A4 750 A 1500 A JDA36150 JGA36150 JJA36150 JLA36150 JRA36150 175 A4 875 A 1750 A JDA36175 JGA36175 JJA36175 JLA36175 JRA36175 A5 1000 A 2000 A JDA36200 JGA36200 JJA36200 JLA36200 JRA36200 225 A5 1125 A 2250 A JDA36225 JGA36225 JJA36225 JLA36225 JRA36225 A5 1250 A 2500 A JDA36250 JGA36250 JJA36250 JLA36250 JRA36250 200 250 1 No 100% I-Line available. 2 () Indicates phasing. See “Catalog Numbering” on page 8. 3 UL Listed/CSA Certified as current limiting. 4 Standard lug kit: AL175JD. Terminal wire range: 4–4/0 AWG Al or Cu. 5 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. 31 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 20: H-Frame 150 A and J-Frame 250 A I-Line Standard (80%) Rated Electronic Trip UL Rated Circuit Breakers (3P, 600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection 1 Electronic Trip Unit Type Function Standard Trip Unit Ammeter LSI Energy Ammeter Energy HJA36060U31X HLA36060U31X HRA36060U31X HGA36100U31X HJA36100U31X HLA36100U31X HRA36100U31X HDA36150U31X HGA36150U31X HJA36150U31X HLA36150U31 HRA36150U31 250 A3, 5 JDA36250U31X JGA36250U31X JJA36250U31X JLA36250U31X JRA36250U31X HDA36060U33X HGA36060U33X HJA36060U33X HLA36060U33X HRA36060U33X HDA36100U33X HGA36100U33X HJA36100U33X HLA36100U33X HRA36100U33X HDA36150U33X HGA36150U33X HJA36150U33X HLA36150U33X HRA36150U33X 250 A3, 5 JDA36250U33X JGA36250U33X JJA36250U33X JLA36250U33X JRA36250U33X HDA36060U43X HGA36060U43X( HJA36060U43X HLA36060U43X HRA36060U43X HDA36100U43X HGA36100U43X HJA36100U43X HLA36100U43X HRA36100U43X HDA36150U43X HGA36150U43X HJA36150U43X HLA36150U43X HRA36150U43X 250 A3, 5 JDA36250U43X JGA36250U43X JJA36250U43X JLA36250U43X JRA36250U43X HDA36060U53X HGA36060U53X HJA36060U53X HLA36060U53X HRA36060U53X HDA36100U53X HGA36100U53X HJA36100U53X HLA36100U53X HRA36100U53X HDA36150U53X HGA36150U53X HJA36150U53X HLA36150U53X HRA36150U53X 250 A3, 5 JDA36250U53X JGA36250U53X JJA36250U53X JLA36250U53X JRA36250U53X HDA36060U44X HGA36060U44X HJA36060U44X HLA36060U44X HRA36060U44X HDA36100U44X HGA36100U44X HJA36100U44X HLA36100U44X HRA36100U44X HDA36150U44X HGA36150U44X HJA36150U44X HLA36150U44X HRA36150U44X 250 A3, 5 JDA36250U44X JGA36250U44X JJA36250U44X JLA36250U44X JRA36250U44X HDA36060U54X HGA36060U54X HJA36060U54X HLA36060U54X HRA36060U54X HDA36100U54X HGA36100U54X HJA36100U54X HLA36100U54X HRA36100U54X HDA36150U54X HGA36150U54X HJA36150U54X( HLA36150U54X HRA36150U54X 250 A3, 5 JDA36250U54X JGA36250U54X JJA36250U54X JLA36250U54X JRA36250U54X 60 A4 100 A4 150 A4 60 A4 100 A4 150 A4 60 A4 100 A4 150 A4 5.2E LSIG 60 A4 100 A4 150 A4 6.2A LSIG 60 A4 100 A4 150 A4 6.2E 1 No 100% I-Line available. 2 UL Listed/CSA Certified as current limiting circuit breakers. 3 3P circuit breakers with this trip unit can be used for 2P applications. 4 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 5 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. For smaller wire range (4–4/0 AWG Al or Cu), replace the lug’s wire binding screws with the larger binding screws provided. Table 21: R2 HGA36060U31X 5.2A LSI L2 HDA36100U31X 3.2S3 LSI J2 G HDA36060U31X 60 A4 100 A4 150 A4 3.23 LI Standard Sensor Interrupting Rating Rating D J-Frame 250 A Mission Critical I-Line Standard (80%) Rated Electronic Trip UL Rated Circuit Breakers (3P, 480Y/277 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Standard LI 3.2-W Sensor Rating Interrupting Rating1. D G J L 250 A JDA34250WU31X JGA34250WU31X JJA34250WU31X JLA34250WU31X Standard LSI 3.2S-W 250 A JDA34250WU33X JGA34250WU33X JJA34250WU33X JLA34250WU33X Ammeter LSI 5.2A-W 250 A JDA34250WU43X JGA34250WU43X JJA34250WU43X JLA34250WU43X Energy LSI 5.2E-W 250 A JDA34250WU53X JGA34250WU53X JJA34250WU53X JLA34250WU53X Ammeter LSIG 6.2A-W 250 A JDA34250WU44X JGA34250WU44X JJA34250WU44X JLA34250WU44X Energy LSIG 6.2E-W 250 A JDA34250WU54X JGA34250WU54X JJA34250WU54X JLA34250WU54X 1 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. For smaller wire range (4–4/0 AWG Al or Cu), replace the lug’s wire binding screws with the larger binding screws provided. 32 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Circuit Breakers with Field-Interchangeable Trip Units Catalog Numbers Table 22: H-Frame 150 A Circuit Breaker Frame1 with Field-Interchangeable Thermal-Magnetic Trip Units2 (3P, 600 Vac, 250 Vdc) Fixed AC Magnetic Trip Interrupting Rating D G J3 L3 Hold Trip Cat. No. Cat. No. Cat. No. Cat. No. 15 A 350 A 750 A HDL36015T HGL36015T HJL36015T HLL36015T 20 A 350 A 750 A HDL36020T HGL36020T HJL36020T HLL36020T 25 A 350 A 750 A HDL36025T HGL36025T HJL36025T HLL36025T 30 A 350 A 750 A HDL36030T HGL36030T HJL36030T HLL36030T 35 A 400 A 850 A HDL36035T HGL36035T HJL36035T HLL36035T 40 A 400 A 850 A HDL36040T HGL36040T HJL36040T HLL36040T 45 A 400 A 850 A HDL36045T HGL36045T HJL36045T HLL36045T 50 A 400 A 850 A HDL36050T HGL36050T HJL36050T HLL36050T 60 A 800 A 1450 A HDL36060T HGL36060T HJL36060T HLL36060T 70 A 800 A 1450 A HDL36070T HGL36070T HJL36070T HLL36070T 80 A 800 A 1450 A HDL36080T HGL36080T HJL36080T HLL36080T 90 A 800 A 1450 A HDL36090T HGL36090T HJL36090T HLL36090T 100 A 900 A 1700 A HDL36100T HGL36100T HJL36100T HLL36100T 110 A 900 A 1700 A HDL36110T HGL36110T HJL36110T HLL36110T 125 A 900 A 1700 A HDL36125T HGL36125T HJL36125T HLL36125T 150 A 900 A 1700 A HDL36150T HGL36150T HJL36150T HLL36150T Ampere Rating 1 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 2 Circuit breakers will be labeled with Line and Load markings and are not suitable for reverse connections. Only available on standard (80%) rated 3P unit-mount circuit breakers. Not available in R interrupting rating. Not available with I-Line or Plug-In constructions. 3 UL Listed/CSA Certified as current limiting circuit breakers. Table 23: Ampere Rating 150 A3 J-Frame 250 A Circuit Breaker Frame with Field-Interchangeable Thermal-Magnetic Trip Units1 (3P, 600 Vac, 250 Vdc) Adjustable AC Magnetic Trip Interrupting Rating D G Low High Cat. No. Cat. No. Cat. No. Cat. No. 750 A 1500 A JDL36150T JGL36150T JJL36150T JLL36150T J2 L3 175 A3 875 A 1750 A JDL36175T JGL36175T JJL36175T JLL36175T 200 A4 1000 A 2000 A JDL36200T JGL36200T JJL36200T JLL36200T 225 A4 1125 A 2250 A JDL36225T JGL36225T JJL36225T JLL36225T 250 A4 1250 A 2500 A JDL36250T JGL36250T JJL36250T JLL36250T 1 Circuit breakers will be labeled with Line and Load markings and are not suitable for reverse connections. Only available on standard (80%) rated 3P unit-mount circuit breakers. Not available in R interrupting rating. Not available with I-Line™ or Plug-In constructions. 2 UL Listed/CSA Certified as current limiting circuit breakers. 3 Standard lug kit: AL175JD. Terminal wire range: 4–4/0 AWG Al or Cu. 4 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. 33 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 24: H-Frame 150 A and J-Frame 250 A 3P Circuit Breakers with Lugs and Field-Interchangeable Electronic Trip Units1, 2 (Standard (80%) Rated, 600 Vac, 50/60 Hz) Electronic Trip Unit Type Function Trip Unit Sensor Size Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.2 3.2S 5.2A 5.2E 6.2A 6.2E D J3 G HDL36060TU31X HGL36060TU31X HJL36060TU31X HLL36060TU31X 100 A4 HDL36100TU31X HGL36100TU31X HJL36100TU31X HLL36100TU31X 150 A4 HDL36150TU31X HGL36150TU31X HJL36150TU31X HLL36150TU31X 250 A5 JDL36250TU31X JGL36250TU31X JJL36250TU31X JLL36250TU31X 60 A4 HDL36060TU33X HGL36060TU33X HJL36060TU33X HLL36060TU33X 100 A4 HDL36100TU33X HGL36100TU33X HJL36100TU33X HLL36100TU33X 150 A4 HDL36150TU33X HGL36150TU33X HJL36150TU33X HLL36150TU33X 250 A5 JDL36250TU33X JGL36250TU33X JJL36250TU33X JLL36250TU33X 60 A4 HDL36060TU43X HGL36060TU43X HJL36060TU43X HLL36060TU43X 100 A4 HDL36100TU43X HGL36100TU43X HJL36100TU43X HLL36100TU43X 150 A4 HDL36150TU43X HGL36150TU43X HJL36150TU43X HLL36150TU43X 250 A5 JDL36250TU43X JGL36250TU43X JJL36250TU43X JLL36250TU43X 60 A4 HDL36060TU53X HGL36060TU53X HJL36060TU53X HLL36060TU53X 100 A4 HDL36100TU53X HGL36100TU53X HJL36100TU53X HLL36100TU53X 150 A4 HDL36150TU53X HGL36150TU53X HJL36150TU53X HLL36150TU53X 250 A5 JDL36250TU53X JGL36250TU53X JJL36250TU53X JLL36250TU53X 60 A4 HDL36060TU44X HGL36060TU44X HJL36060TU44X HLL36060TU44X 100 A4 HDL36100TU44X HGL36100TU44X HJL36100TU44X HLL36100TU44X 150 A4 HDL36150TU44X HGL36150TU44X HJL36150TU44X HLL36150TU44X 250 A5 JDL36250TU44X JGL36250TU44X JJL36250TU44X JLL36250TU44X 60 A4 HDL36060TU54X HGL36060TU54X HJL36060TU54X HLL36060TU54X 100 A4 HDL36100TU54X HGL36100TU54X HJL36100TU54X HLL36100TU54X 150 A4 HDL36150TU54X HGL36150TU54X HJL36150TU54X HLL36150TU54X 250 A5 JDL36250TU54X JGL36250TU54X JJL36250TU54X JLL36250TU54X 1 Circuit breakers will be labeled with Line and Load markings and are not suitable for reverse connections. 2 Only available on 3P unit-mount circuit breakers. Not available in R interrupting rating. Not available with I-Line or Plug-in constructions. 3 UL Listed/CSA Certified as current limiting circuit breakers. 4 Standard lug kit: AL150HD. Terminal wire range: 14–3/0 AWG Al or Cu. 5 Standard lug kit: AL250JD. Terminal wire range: 3/0 AWG–350 kcmil Al or Cu. For smaller wire range (4–4/0 AWG Al or Cu), replace the lug’s wire binding screws with the larger binding screws provided. Table 25: H-Frame and J-Frame 3P Field-Installable Thermal-Magnetic Trip Units 15–60 A H-Frame H-Frame Trip Unit L3 A4 60 Standard Interrupting Rating 70–150 A H-Frame 150–250 A J-Frame Amperage Cat. No. Amperage Cat. No. Amperage Cat. No. 15 A HT3015 70 A HT3070 150 A JT3150 20 A HT3020 80 A HT3080 175 A JT3175 25 A HT3025 90 A HT3090 200 A JT3200 30 A HT3030 100 A HT3100 225 A JT3225 35 A HT3035 110 A HT3110 250 A JT3250 40 A HT3040 125 A HT3125 — — 45 A HT3045 150 A HT3150 — — 50 A HT3050 — — — — 60 A HT3060 — — — — 34 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers H-Frame and J-Frame 3P Field-Installable Micrologic Electronic Trip Units1 Table 26: Electronic Trip Unit Trip Unit Cat. No. Ampere Settings Type Function LI Trip Unit 3.2 Standard LSI 3.2S LSI 5.2A Ammeter LSIG 6.2A LSI 5.2E Energy LSIG 1 6.2E 15-20-25-30-35-40-45-50-60 HE3060U31X 35-40-45-50-60-70-80-90-100 HE3100U31X 50-60-70-80-90-100-110-125-150 HE3150U31X 70-80-100-125-150-175-200-225-250 JE3250U31X 15-20-25-30-35-40-45-50-60 HE3060U33X 35-40-45-50-60-70-80-90-100 HE3100U33X 50-60-70-80-90-100-110-125-150 HE3150U33X 70-80-100-125-150-175-200-225-250 JE3250U33X 15–60 HE3060U43X 35–100 HE3100U43X 50–150 HE3150U43X 70–250 JE3250U43X 15–60 HE3060U44X 35–100 HE3100U44X 50–150 HE3150U44X 70–250 JE3250U44X 15–60 HE3060U53X 35–100 HE3100U53X 50–150 HE3150U53X 70–250 JE3250U53X 15–60 HE3060U54X 35–100 HE3100U54X 50–150 HE3150U54X 70–250 JE3250U54X Electronic trip units cannot be used for DC applications. Table 27: Circuit Breaker Frame H-Frame3 J-Frame H-Frame 150A and J-Frame 250 A 3P Basic Circuit Breaker Frame Without Terminations or Trip Unit (600 Vac, 250 Vdc1) Interrupting Rating Ampere Rating D G J2 Cat. No. Cat. No. Cat. No. Cat. No. 15–60 A HDF36000F06 HGF36000F06 HJF36000F06 HLF36000F06 70–150 A HDF36000F15 HGF36000F15 HJF36000F15 HLF36000F15 150–250 A JDF36000F25 JGF36000F25 JJF36000F25 JLF36000F25 1 Not suitable for reverse connection. 2 UL Listed/CSA Certified as current limiting circuit breakers. 3 Field-installed trip units must match frame ampere rating. L2 35 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers L-Frame Circuit Breaker Catalog Numbers Unit-Mount Circuit Breaker Catalog Numbers Table 28: L-Frame 600 A Electronic Trip UL Rated 3P Circuit Breakers (600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Interrupting Rating (2nd Letter of Catalog Number) D J1 G L1 R1 Standard (80%) Rated, 600 Vac, 50/60 Hz Standard Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.32 3.3S2 5.3A 5.3E 6.3A 6.3E 250 A3 LDL36250U31X LGL36250U31X LJL36250U31X LLL36250U31X LRL36250U31X 400 A4 LDL36400U31X LGL36400U31X LJL36400U31X LLL36400U31X LRL36400U31X 600 A4 LDL36600U31X LGL36600U31X LJL36600U31X LLL36600U31X LRL36600U31X 250 A3 LDL36250U33X LGL36250U33X LJL36250U33X LLL36250U33X LRL36250U33X 400 A4 LDL36400U33X LGL36400U33X LJL36400U33X LLL36400U33X LRL36400U33X 600 A4 LDL36600U33X LGL36600U33X LJL36600U33X LLL36600U33X LRL36600U33X 400 A4 LDL36400U43X LGL36400U43X LJL36400U43X LLL36400U43X LRL36400U43X 600 A4 LDL36600U43X LGL36600U43X LJL36600U43X LLL36600U43X LRL36600U43X 400 A4 LDL36400U53X LGL36400U53X LJL36400U53X LLL36400U53X LRL36400U53X 600 A4 LDL36600U53X LGL36600U53X LJL36600U53X LLL36600U53X LRL36600U53X 400 A4 LDL36400U44X LGL36400U44X LJL36400U44X LLL36400U44X LRL36400U44X 600 A4 LDL36600U44X LGL36600U44X LJL36600U44X LLL36600U44X LRL36600U44X 400 A4 LDL36400U54X LGL36400U54X LJL36400U54X LLL36400U54X LRL36400U54X 600 A4 LDL36600U54X LGL36600U54X LJL36600U54X LLL36600U54X LRL36600U54X 250 A3 LDL36250CU31X LGL36250CU31X LJL36250CU31X LLL36250CU31X LRL36250CU31X 400 A4 LDL36400CU31X LGL36400CU31X LJL36400CU31X LLL36400CU31X LRL36400CU31X 250 A3 LDL36250CU33X LGL36250CU33X LJL36250CU33X LLL36250CU33X LRL36250CU33X 400 A4 LDL36400CU33X LGL36400CU33X LJL3640C0U33X LLL36400CU33X LRL36400CU33X 100% Rated, 600 Vac, 50/60 Hz Standard LI 3.32 Standard LSI 3.3S2 Ammeter LSI 5.3A 400 A4 LDL36400CU43X LGL36400CU43X LJL36400CU43X LLL36400CU43X LRL36400CU43X Energy LSI 5.3E 400 A4 LDL36400CU53X LGL36400CU53X LJL36400CU53X LLL36400CU53X LRL36400CU53X Ammeter LSIG 6.3A 400 A4 LDL36400CU44X LGL36400CU44X LJL36400CU44X LLL36400CU44X LRL36400CU44X Energy LSIG 6.3E 400 A4 LDL36400CU54X LGL36400CU54X LJL36400CU54X LLL36400CU54X LRL36400CU54X 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 3P circuit breakers with this trip unit can be used for 2P applications. 3 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 4 Standard lug kit: AL600LS52K3. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. 36 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 29: L-Frame 600 A Mission Critical Standard (100%1) Rated Electronic Trip UL Rated 3P Circuit Breakers (480Y/277 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.3-W 3.3S-W 5.3A-W 5.3E-W 6.3A-W 6.3E-W D G J L A2 LDL34250WU31X LGL34250WU31X LJL34250WU31X LLL34250WU31X 400 A3 LDL34400WU31X LGL34400WU31X LJL34400WU31X LLL34400WU31X 600 A3 LDL34600WU31X LGL34600WU31X LJL34600WU31X LLL34600WU31X 250 A2 LDL34250WU33X LGL34250WU33X LJL34250WU33X LLL34250WU33X 400 A3 LDL34400WU33X LGL34400WU33X LJL34400WU33X LLL34400WU33X 600 A3 LDL34600WU33X LGL34600WU33X LJL34600WU33X LLL34600WU33X 400 A3 LDL34400WU43X LGL34400WU43X LJL34400WU43X LLL34400WU43X 600 A3 LDL34600WU43X LGL34600WU43X LJL34600WU43X LLL34600WU43X 400 A3 LDL34400WU53X LGL34400WU53X LJL34400WU53X LLL34400WU53X 600 A3 LDL34600WU53X LGL34600WU53X LJL34600WU53X LLL34600WU53X 400 A3 LDL34400WU44X LGL34400WU44X LJL34400WU44X LLL34400WU44X 600 A3 LDL34600WU44X LGL34600WU44X LJL34600WU44X LLL34600WU44X 400 A3 LDL34400WU54X LGL34400WU54X LJL34400WU54X LLL34400WU54X 600 A3 LDL34600WU54X LGL34600WU54X LJL34600WU54X LLL34600WU54X 250 Standard Interrupting Rating (2nd Letter of Catalog Number) 1 Standard rating is 100% for 250 and 400 A only. Standard rating is 80% for 600 A. 2 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 3 Standard lug kit: AL600LS52K3. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. 37 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 30: L-Frame 600 A Electronic Trip UL Rated 4P Circuit Breakers (600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Interrupting Rating (2nd Letter of Catalog Number) D J1 G L1 R1 Standard (80%) Rated, 600 Vac, 50/60 Hz Standard Standard Ammeter Energy LI 3.3 LSI 3.3S LSI 5.3A LSI Ammeter Energy 5.3E LSIG LSIG 6.3A 6.3E 250 A2 LDL46250U31X LGL46250U31X LJL46250U31X LLL46250U31X LRL46250U31X 400 A3 LDL46400U31X LGL46400U31X LJL46400U31X LLL46400U31X LRL46400U31X LRL46600U31X 600 A3 LDL46600U31X LGL46600U31X LJL46600U31X LLL46600U31X 250 A2 LDL46250U33X LGL46250U33X LJL46250U33X LLL46250U33X LRL46250U33X 400 A3 LDL46400U33X LGL46400U33X LJL46400U33X LLL46400U33X LRL46400U33X 600 A3 LDL46600U33X LGL46600U33X LJL46600U33X LLL46600U33X LRL46600U33X 400 A3 LDL46400U43X LGL46400U43X LJL46400U43X LLL46400U43X LRL46400U43X 600 A3 LDL46600U43X LGL46600U43X LJL46600U43X LLL46600U43X LRL46600U43X 400 A3 LDL46400U53X LGL46400U53X LJL46400U53X LLL46400U53X LRL46400U53X 600 A3 LDL46600U53X LGL46600U53X LJL46600U53X LLL46600U53X LRL46600U53X 400 A3 LDL46400U44X LGL46400U44X LJL46400U44X LLL46400U44X LRL46400U44X 600 A3 LDL46600U44X LGL46600U44X LJL46600U44X LLL46600U44X LRL46600U44X 400 A3 LDL46400U54X LGL46400U54X LJL46400U54X LLL46400U54X LRL46400U54X 600 A3 LDL46600U54X LGL46600U54X LJL46600U54X LLL46600U54X LRL46600U54X 250 A2 LDL46250CU31X LGL46250CU31X LJL46250CU31X LLL46250CU31X LRL46250CU31X 400 A3 LDL46400CU31X LGL46400CU31X LJL46400CU31X LLL46400CU31X LRL46400CU31X 250 A2 LDL46250CU33X LGL46250CU33X LJL46250CU33X LLL46250CU33X LRL46250CU33X 400 A3 LDL46400CU33X LGL46400CU33X LJL46400CU33X LLL46400CU33X LRL46400CU33X 100% Rated, 600 Vac, 50/60 Hz Standard LI 3.3 Standard LSI 3.3S Ammeter LSI 5.3A 400 A3 LDL46400CU43X LGL46400CU43X LJL46400CU43X LLL46400CU43X LRL46400CU43X Energy LSI 5.3E 400 A3 LDL46400CU53X LGL46400CU53X LJL46400CU53X LLL46400CU53X LRL46400CU53X Ammeter LSIG 6.3A 400 A3 LDL46400CU44X LGL46400CU44X LJL46400CU44X LLL46400CU44X LRL46400CU44X Energy LSIG 6.3E 400 A3 LDL46400CU54X LGL46400CU54X LJL46400CU54X LLL46400CU54X LRL46400CU54X 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 Standard lug kit: AL400L61K4. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 3 Standard lug kit: AL600LS52K4. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. Table 31: L-Frame 600 A Mission Critical Standard (80%) Rated Electronic Trip UL Rated 4P Circuit Breakers (480Y/277 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.3-W 3.3S-W 5.3A-W 5.3E-W 6.3A-W 6.3E-W D G J L A1 LDL44250WU31X LGL44250WU31X LJL44250WU31X LLL44250WU31X 400 A2 LDL44400WU31X LGL44400WU31X LJL44400WU31X LLL44400WU31X 600 A2 LDL44600WU31X LGL44600WU31X LJL44600WU31X LLL44600WU31X 250 A1 LDL44250WU33X LGL44250WU33X LJL44250WU33X LLL44250WU33X 400 A2 LDL44400WU33X LGL44400WU33X LJL44400WU33X LLL44400WU33X 600 A2 LDL44600WU33X LGL44600WU33X LJL44600WU33X LLL44600WU33X 400 A2 LDL44400WU43X LGL44400WU43X LJL44400WU43X LLL44400WU43X 600 A2 LDL44600WU43X LGL44600WU43X LJL44600WU43X LLL44600WU43X 400 A2 LDL44400WU53X LGL44400WU53X LJL44400WU53X LLL44400WU53X 600 A2 LDL44600WU53X LGL44600WU53X LJL44600WU53X LLL44600WU53X 400 A2 LDL44400WU44X LGL44400WU44X LJL44400WU44X LLL44400WU44X 600 A2 LDL44600WU44X LGL44600WU44X LJL44600WU44X LLL44600WU44X 400 A2 LDL44400WU54X LGL44400WU54X LJL44400WU54X LLL44400WU54X 600 A2 LDL44600WU54X LGL44600WU54X LJL44600WU54X LLL44600WU54X 250 Standard Interrupting Rating (2nd Letter of Catalog Number) 1 Standard lug kit: AL400L61K4. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 2 Standard lug kit: AL600LS52K4. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. 38 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers I-Line Circuit Breaker Catalog Numbers Table 32: L-Frame 600 A I-Line Standard (80%) Rated Electronic Trip UL Rated Circuit Breakers (600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Standard Ammeter Energy 3.32 LI 3.3S2 LSI LSI 5.3A LSI Ammeter Energy LSIG J1 G L3 LDA36250U31X LGA36250U31X LJA36250U31X LLA36250U31X LRA36250U31X 400 A4 LGA36400U31X LJA36400U31X LLA36400U31X LRA36400U31X 600 A4 LDA36400U31X LDA36600U31X LGA36600U31X LJA36600U31X LLA36600U31X LRA36600U31X 250 A3 LDA36250U33X LGA36250U33X LJA36250U33X LLA36250U33X LRA36250U33X 400 A4 LDA36400U33X LGA36400U33X LJA36400U33X LLA36400U33X LRA36400U33X 600 A4 LDA36600U33X LGA36600U33X LJA36600U33X LLA36600U33X LRA36600U33X LDA36400U43X LGA36400U43X LJA36400U43X LLA36400U43X LRA36400U43X 600 A4 LDA36600U43X LGA36600U43X LJA36600U43X LLA36600U43X LRA36600U43X 400 A4 LDA36400U53X LGA36400U53X LJA36400U53X LLA36400U53X LRA36400U53X 600 A4 LDA36600U53X LGA36600U53X LJA36600U53X LLA36600U53X LRA36600U53X 400 A4 LDA36400U44X LGA36400U44X LJA36400U44X LLA36400U44X LRA36400U44X 600 A4 LDA36600U44X LGA36600U44X LJA36600U44X LLA36600U44X LRA36600U44X 400 A4 LDA36400U54X LGA36400U54X LJA36400U54X LLA36400U54X LRA36400U54X 600 A4 LDA36600U54X LGA36600U54X LJA36600U54X LLA36600U54X LRA36600U54X 6.3A 6.3E 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 3P circuit breakers with this trip unit can be used for 2P applications. 3 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 4 Standard lug kit: AL600LF52K3. Terminal wire range: (2) 3/0 AWG–500 kcmil Al/Cu. Type of terminal shield: short. Table 33: L-Frame 600 A Mission Critical I-Line Standard (80%) Rated Electronic Trip UL Rated Circuit Breakers (480/277 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Sensor Rating Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.3-W 3.3S-W 5.3A-W 5.3E-W 6.3A-W 6.3E-W Interrupting Rating D G J L A1 LDA34250WU31X LGA34250WU31X LJA34250WU31X LLA34250WU31X 400 A2 LGA34400WU31X LJA34400WU31X LLA34400WU31X 600 A2 LDA34400WU31X LDA34600WU31X LGA34600WU31X LJA34600WU31X LLA34600WU31X 250 A1 LDA34250WU33X LGA34250WU33X LJA34250WU33X LLA34250WU33X 400 A2 LDA34400WU33X LGA34400WU33X LJA34400WU33X LLA34400WU33X 600 A2 LDA34600WU33X LGA34600WU33X LJA34600WU33X LLA34600WU33X 400 A2 LDA34400WU43X LGA34400WU43X LJA34400WU43X LLA34400WU43X 600 A2 LDA34600WU43X LGA34600WU43X LJA34600WU43X LLA34600WU43X 400 A2 LDA34400WU53X LGA34400WU53X LJA34400WU53X LLA34400WU53X 600 A2 LDA34600WU53X LGA34600WU53X LJA34600WU53X LLA34600WU53X 400 A2 LDA34400WU44X LGA34400WU44X LJA34400WU44X LLA34400WU44X 600 A2 LDA34600WU44X LGA34600WU44X LJA34600WU44X LLA34600WU44X 400 A2 LDA34400WU54X LGA34400WU54X LJA34400WU54X LLA34400WU54X 600 A2 LDA34600WU54X LGA34600WU54X LJA34600WU54X LLA34600WU54X 250 Standard R3 400 A44 5.3E LSIG D A3 250 Standard Interrupting Rating 1 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 2 Standard lug kit: AL600LS52K3. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. 39 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 34: L-Frame 250 A and 400 A I-Line 100% Rated Electronic Trip UL Rated Circuit Breakers (600 Vac, 50/60 Hz) With Factory Sealed Trip Unit Suitable for Reverse Connection Electronic Trip Unit Type Function Trip Unit Standard Sensor Rating 3.32 LI Interrupting Rating D J1 G L3 R3 250 A3 LDA36250CU31X LGA36250CU31X LJA36250CU31X LLA36250CU31X LRA36250CU31X 400 A4 LDA36400CU31X LGA36400CU31X LJA36400CU31X LLA36400CU31X LRA36400CU31X 250 A3 LDA36250CU33X LGA36250CU33X LJA36250CU33X LLA36250CU33X LRA36250CU33X 400 A4 LDA36400CU33X LGA36400CU33X LJA36400CU33X LLA36400CU33X LRA36400CU33X Standard LSI 3.3S2 Ammeter LSI 5.3A 400 A4 LDA36400CU43X LGA36400CU43X LJA36400CU43X LLA36400CU43X LRA36400CU43X Energy LSI 5.3E 400 A4 LDA36400CU53X LGA36400CU53X LJA36400CU53X LLA36400CU53X LRA36400CU53X Ammeter LSIG 6.3A 400 A4 LDA36400CU44X LGA36400CU44X LJA36400CU44X LLA36400CU44X LRA36400CU44X Energy LSIG 6.3E 400 A4 LDA36400CU54X LGA36400CU54X LJA36400CU54X LLA36400CU54X LRA36400CU54X 1 UL Listed/CSA Certified as current limiting circuit breakers. 2 3P circuit breakers with this trip unit can be used for 2P applications. 3 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 4 Standard lug kit: AL600LS52K3. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. Circuit Breakers with Field-Interchangeable Trip Units Catalog Numbers Table 35: L-Frame 3 Pole, 600 A Circuit Breakers with Lugs and Field-Interchangeable Electronic Trip Units (600 Vac, 50/60 Hz)1, 2 Electronic Trip Unit Type Function Trip Unit Sensor Rating Interrupting Rating D J3 G L3 Standard (80% Rated), 600 Vac, 50/60 Hz Standard Standard Ammeter Energy Ammeter Energy LI LSI LSI LSI LSIG LSIG 3.3 3.3S 5.3A 5.3E 6.3A 6.3E 250 A4 LDL36250TU31X LGL36250TU31X LJL36250TU31X LLL36250TU31X 400 A5 LDL36400TU31X LGL36400TU31X LJL36400TU31X LLL36400TU31X 600 A5 LDL36600TU31X LGL36600TU31X LJL36600TU31X LLL36600TU31X 250 A4 LDL36250TU33X LGL36250TU33X LJL36250TU33X LLL36250TU33X 400 A5 LDL36400TU33X LGL36400TU33X LJL36400TU33X LLL36400TU33X 600 A5 LDL36600TU33X LGL36600TU33X LJL36600TU33X LLL36600TU33X 400 A5 LDL36400TU43X LGL36400TU43X LJL36400TU43X LLL36400TU43X 600 A5 LDL36600TU43X LGL36600TU43X LJL36600TU43X LLL36600TU43X 400 A5 LDL36400TU53X LGL36400TU53X LJL36400TU53X LLL36400TU53X 600 A5 LDL36600TU53X LGL36600TU53X LJL36600TU53X LLL36600TU53X 400 A5 LDL36400TU44X LGL36400TU44X LJL36400TU44X LLL36400TU44X 600 A5 LDL36600TU44X LGL36600TU44X LJL36600TU44X LLL36600TU44X 400 A5 LDL36400TU54X LGL36400TU54X LJL36400TU54X LLL36400TU54X 600 A5 LDL36600TU54X LGL36600TU54X LJL36600TU54X LLL36600TU54X 250 A4 LDL36250RU31X LGL36250RU31X LJL36250RU31X LLL36250RU31X 400 A5 LDL36400RU31X LGL36400RU31X LJL36400RU31X LLL36400RU31X 250 A4 LDL36250RU33X LGL36250RU33X LJL36250RU33X LLL36250RU33X 400 A5 LDL36400RU33X LGL36400RU33X LJL36400RU33X LLL36400RU33X 100% Rated, 600 Vac, 50/60 Hz Standard LI 3.3 Standard LSI 3.3S Ammeter LSI 5.3A 400 A5 LDL36400RU43X LGL36400RU43X LJL36400RU43X LLL36400RU43X Energy LSI 5.3E 400 A5 LDL36400RU53X LGL36400RU53X LJL36400RU53X LLL36400RU53X Ammeter LSIG 6.3A 400 A5 LDL36400RU44X LGL36400RU44X LJL36400RU44X LLL36400RU44X Energy LSIG 6.3E 400 A5 LDL36400RU54X LGL36400RU54X LJL36400RU54X LLL36400RU54X 1 Circuit breakers will be labeled with Line and Load markings and are not suitable for reverse connections. 2 Only available on 3P unit-mount circuit breakers. Not available in R interrupting rating. Not available with I-Line or Plug-in constructions. 3 UL Listed/CSA Certified as current limiting circuit breakers. 4 Standard lug kit: AL400L61K3. Terminal wire range: (1) 2 AWG–600 kcmil Cu or (1) 2 AWG–500 kcmil Al. Type of terminal shield: short. 5 Standard lug kit: AL600LS52K3. Terminal wire range: (2) 2/0 AWG–500 kcmil Al/Cu. Type of terminal shield: medium. 40 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breakers Table 36: L-Frame 600 A, 3 Pole, Basic Circuit Breaker Frame Without Terminations or Trip Units (600 Vac, 50/60 Hz)1 Interrupting Rating Ampere Rating D J2 G L2 250 A (70–250 A) LDF36000F25 LGF36000F25 LJF36000F25 LLF36000F25 400 A (125–400 A) LDF36000F40 LGF36000F40 LJF36000F40 LLF36000F40 600 A (200–600 A) LDF36000F60 LGF36000F60 LJF36000F60 LLF36000F60 1 Not suitable for reverse connection. 2 UL Listed/CSA Certified as current limiting Table 37: L-Frame 3P Field-Installable Micrologic Electronic Trip Units Electronic Trip Unit Type Function LI LSI 3.3 3.3S 5.3A Ammeter LSIG LSI 6.3A 5.3E Energy LSIG Trip Unit Cat. No. Trip Unit Standard LSI Ampere Setting 6.3E 70-80-100-125-150-175-200-225-250 LE3250U31X 125-150-175-200-225-250-300-350-400 LE3400U31X 200-225-250-300-350-400-450-500-600 LE3600U31X 70-80-100-125-150-175-200-225-250 LE3250U33X 125-150-175-200-225-250-300-350-400 LE3400U33X 200-225-250-300-350-400-450-500-600 LE3600U33X 125–400 LE3400U43X 200–600 LE3600U43X 125–400 LE3400U44X 200–600 LE3600U44X 125–400 LE3400U53X 200–600 LE3600U53X 125–400 LE3400U54X 200–600 LE3600U54X 41 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Automatic Switches Section 4—Automatic Switches Automatic Switch Functions An automatic switch can be used to open and close a circuit under normal operating conditions. They are similar in construction to circuit breakers, except that the switches open instantaneously at a factory-set, non-adjustable trip point calibrated to protect only the molded case switch. Molded case switches are intended for use as disconnect devices only. UL489 requires molded case switches to be protected by a circuit breaker or fuse of equivalent rating. Molded case switches are labeled with their appropriate withstand ratings. The withstand rating of a switch is defined as the maximum current at rated voltage that the molded case switch will withstand without damage when protected by a circuit breaker with an equal continuous current rating. PowerPact™ H-, J-, and L-frame automatic switches are available in unit mount, I-Line™, plug-in and drawout versions. They use the same accessories and offer the same connection possibilities as the circuit-breaker versions. They may be interlocked with another switch or circuit breaker to form a source-changeover system. Switches are Listed under UL file E103740 and Certified under CSA file LR88980. Motor Operator PowerPact H-, J-, and L-frame switches equipped with a motor operator module allow remote closing and opening. Ground Fault Protection (H- and J-Frame Circuit Breakers Only) An ELM or GFM module may be added to an automatic switch to monitor all leakage currents in the outgoing circuits of the equipment on which the automatic switch is installed. When the ELM or GFM module detects an earth-leakage current, the automatic switch interrupts the load current. Automatic Switch Protection The automatic switch can make and break its rated current. For an overload or a short-circuit, it must be protected by an upstream device, in compliance with installation standards. Due to their high-set instantaneous release PowerPact H-, J- and L-frame automatic switches are self-protected. 42 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Automatic Switches Specifications Table 38: H-Frame Automatic Molded Case Switch Specifications Frame H-Frame Withstand Rating “G” 2P 3P 2P1 3P 150 A HGL26000S15 HGL3600S15 HLL26000S15 HLL36000S15 175 A — — — — 250 A — — — — 240 Vac 65 kA 65 kA 125 kA 125 kA Poles Catalog Number UL 489 Withstand Ratings IEC 60947-3 480 Vac 35 kA 35 kA 100 kA 100 kA 600 Vac 18 kA 18 kA 50 kA 50 kA 250 Vdc 20 kA 20 kA 20 kA 20 kA AC Trip Point 2250 A 2250 A 2250 A 2250 A Rated Insulation Voltage 750 Vac 750 Vac 750 Vac 750 Vac 8 kV Rated Impulse Withstand Voltage Rated Operational Voltage 1 8 kV 8 kV 8 kV ac 525 Vac 525 Vac 525 Vac 690 Vac dc — — — — 2P devices use a 3P switch frame with the center pole inoperative. Table 39: J-Frame Automatic Molded Case Switch Specifications Frame J-Frame Withstand Rating “G” Catalog Number UL 489 Withstand Ratings IEC 60947-3 “L” “R” 2P1 3P 2P1 3P 150 A — — — — — 175 A JGL26000S17 JGL36000S17 JLL26000S17 JLL36000S17 JRL36000S17 250 A JGL26000S25 JGL36000S25 JLL26000S25 JLL36000S25 JRL36000S25 240 Vac 65 kA 65 kA 125 kA 125 kA 200 kA 480 Vac 35 kA 35 kA 100 kA 100 kA 200 kA 600 Vac 18 kA 18 kA 50 kA 50 kA 100 kA 250 Vdc 20 kA Poles 3P 20 kA 20 kA 20 kA 20 kA AC Trip Point 3125 A 3125 A 3125 A 3125 A 3125 A Rated Insulation Voltage 750 Vac 750 Vac 750 Vac 750 Vac 750 Vac Rated Impulse Withstand Voltage Rated Operational Voltage 1 “L” 8 kV 8 kV 8 kV 8 kV 8 kV ac 525 Vac 525 Vac 525 Vac 525 Vac 690 Vac dc 500 Vdc 500 Vdc 500 Vdc 500 Vdc 500 Vdc 2P devices use a 3P switch frame with the center pole inoperative. 43 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Automatic Switches Catalog Numbers Table 40: PowerPact H-Frame and J-Frame 250 A Unit-Mount Automatic Molded Case Switches, 600 Vac with Factory Sealed Trip Unit (Suitable for Reverse Connection) Ampere 2-pole Rating Cat. No. 3-pole Withstand Rating 1 Cat. No. 240 Vac 480 Vac 600 Vac 65 35 18 2250 A 65 35 18 3125 A 125 100 50 2250 A 125 100 50 3125 A 200 200 100 3125 A Trip Point Standard Lug Kit Terminal Wire Range G Withstand 150 A HGL26000S152 HGL36000S15 175 A JGL26000S17 JGL36000S17 250 A JGL26000S25 JGL36000S25 AL150HD #14–#3/0 AWG Al or Cu AL250JD #3/0–350 kcmil Al or Cu L Withstand 150 A HLL26000S15 HLL36000S15 175 A JLL26000S17 JLL36000S17 250 A JLL26000S25 JLL36000S25 AL150HD #14–#3/0 AWG Al or Cu AL250JD #3/0–350 kcmil Al or Cu R Withstand 175 A — JRL36000S17 250 A — JRL36000S25 AL250JD #3/0–350 kcmil Al or Cu 1 The withstand rating is the fault current, at rated voltage, that the molded case switch will withstand without damage when protected by a circuit breaker or fuse with an equal continuous current rating. 2 2-pole device with 3 in. (76 mm) mounting height, all other 2-pole circuit breakers use 3-pole switch 4.5 in. (114 mm) mounting height. Table 41: PowerPact H-Frame and J-Frame I-Line Automatic Molded Case Switches, 600 Vac with Factory Sealed Trip Unit (Suitable for Reverse Connection) Ampere 2-pole Rating Cat. No. 3-pole Withstand Rating 1 Cat. No. 240 Vac 480 Vac 600 Vac 65 35 18 1300 A 65 35 18 2500 A 125 100 50 1300 A Trip Point Standard Lug Kit Terminal Wire Range G Withstand 150 A HGA26000S15( )2 HGA36000S15 175 A JGA26000S17( ) JGA36000S17 250 A JGA26000S25( ) JGA36000S25 AL150HD #14–#3/0 AWG Al or Cu AL250JD #3/0–350 kcmil Al or Cu L Withstand 150 A HLA26000S15( ) HLA36000S15 175 A JLA26000S17( ) JLA36000S17 250 A JLA26000S25( ) JLA36000S25 125 100 50 200 200 100 AL150HD #14–#3/0 AWG Al or Cu 1300 A AL250JD 2500 A #3/0–350 kcmil Al or Cu R Withstand 175 A JRA26000S17( ) JRA36000S17 250 A JRA26000S25( ) JRA36000S25 3125A AL250JD #3/0–350 kcmil Al or Cu 1 The withstand rating is the fault current, at rated voltage, that the molded case switch will withstand without damage when protected by a circuit breaker or fuse with an equal continuous current rating. 2 2-pole device with 3 in. (76 mm) mounting height, all other 2-pole circuit breakers use 3-pole 4.5 in. (114 mm) mounting height. 44 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Automatic Switches Table 42: Ampere Rating PowerPact L-Frame 600 A Unit-Mount Automatic Molded Case Switches, 600 Vac Withstand Rating 2 Cat. No. Poles1 240 Vac 480 Vac 600 Vac Trip Point Standard Lug Terminal Wire Range Unit-Mount Automatic Molded Case Switches, G Withstand 400 A 600 A 400 A 600 A 3P 4P LGL36000S40X 65 kA 35 kA 18 kA 4800 A LGL36000S60X 65 kA 35 kA 18 kA 6600 A LGL46000S40X 65 kA 35 kA 18 kA 4800 A LGL46000S60X 65 kA 35 kA 18 kA 6600 A AL600LS52K3 (2) 2 AWG–500 kcmil Al/Cu AL600LS52K4 (2) 2 AWG–500 kcmil Al/Cu L Withstand 400 A 600 A 400 A 600 A 3P 4P LLL36000S40X 125 kA 100 kA 50 kA 4800 A LLL36000S60X 125 kA 100 kA 50 kA 6600 A LLL46000S40X 125 kA 100 kA 50 kA 4800 A LLL46000S60X 125 kA 100 kA 50 kA 6600 A LRL36000S40X 200 kA 200 kA 100 kA 4800 A LRL36000S60X 200 kA 200 kA 100 kA 6600 A LRL46000S40X 200 kA 200 kA 100 kA 4800 A LRL46000S60X 200 kA 200 kA 100 kA 6600 A AL600LS52K3 (2) 2 AWG–500 kcmil Al/Cu AL600LS52K4 (2) 2 AWG–500 kcmil Al/Cu R Withstand 400 A 600 A 400 A 600 A 3P 4P AL600LS52K3 (2) 2 AWG–500 kcmil Al/Cu AL600LS52K4 (2) 2 AWG–500 kcmil Al/Cu I-Line Circuit Breakers Automatic Molded Case Switches G Withstand 400 A 600 A 3P LGA36000S40X 65 kA 35 kA 18 kA 4800 A LGA36000S60X 65 kA 35 kA 18 kA 6600 A LLA36000S40X 125 kA 100 kA 50 kA 4800 A LLA36000S60X 125 kA 100 kA 50 kA 6600 A AL600LF52K3 (2) 3/0 AWG–500 kcmil Al/Cu L Withstand 400 A 600 A 3P AL600LF52K3 (2) 3/0 AWG–500 kcmil Al/Cu R Withstand 400 A 600 A 3P LRA36000S40X 200 kA 200 kA 100 kA 4800 A LRA36000S60X 200 kA 200 kA 100 kA 6600 A AL600LF52K3 (2) 3/0 AWG–500 kcmil Al/Cu 1 4P circuit breaker available as bus connected, with lug configurations, and in plug-in, draw-out and rear-connected configurations. 2 The withstand rating is the fault current, at rated voltage, that the molded case switch will withstand without damage when protected by a circuit breaker or fuse with an equal continuous current rating. Table 43: L-Frame Ratings and Withstand Ratings Circuit Breaker 400 A 600 A Number of Poles 3, 4 3, 4 Ampere Rating (A) 400 600 600 600 Rated Insulation Voltage (V) 750 750 Rated Impulse Withstand Voltage (kV) 8 8 690 UL 489 Ratings Rated Voltage (V) IEC 60947-3 ratings Rated Operational Voltage Ue AC 50/60 Hz 690 Rated Operational Current Ie AC 525 V 400 600 7.1 8.5 Making Capacity (kA peak) Short-Time Withstand Current (kA rms) Icw Icw (kA ms) 5 6 Duration (s) 1 1 45 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Section 5—Motor Circuit Protection General Information The parameters to be considered for motor-feeder protection depend on: • • • the application (type of machine driven, operating safety, frequency of operation, etc.) the level of continuity of service required by the load or the application the applicable standards for the protection of equipment. The required electrical functions are: • • • • isolation switching, generally at high endurance levels protection against overloads and short-circuits, adapted to the motor additional special protection. A motor branch circuit must comply with the requirements of standard UL 508 concerning contactors and their protection: • • coordination of feeder components overload relay trip classes. Motor Branch Circuit Protection Function A motor branch circuit comprises a set of devices for motor protection and control, as well as for protection of the branch circuit itself. Switching The purpose is to control the motor (ON / OFF), either manually, automatically or remotely, taking into account overloads upon start-up and the long service life required. This function is provided by a contactor. When the coil of the contactor's electromagnet is energized, the contactor closes and establishes, through the poles, the circuit between the upstream supply and the motor, through the circuit breaker. Basic Protection • Short-circuit protection Detection and breaking, as quickly as possible, of high short-circuit currents to avoid damage to the installation. This function is provided by a circuit breaker. • Overload protection Detection of overload currents and motor shutdown before temperature rise in the motor and conductors damages insulation. This function is provided by a circuit breaker or a separate motor overload relay. • Phase unbalance or phase loss protection Phase unbalance or phase loss can cause temperature rise and braking torques that can lead to premature aging of the motor. These effects are even greater during starting, therefore protection must be virtually immediate. 46 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Additional Electronic Protection • • • • Locked rotor Under-load Long starts and stalled rotor Insulation faults Trip Class of a Overload Relay Device The motor branch circuit includes thermal protection that may be built into the circuit breaker. The protection must have a trip class suited to motor starting. Depending on the application, the motor starting time varies from a few seconds (no-load start) to a few dozen seconds (high-inertia load). Table 44: Trip Class of Overload Relays as a Function of Their FLA Setting Class 1.05 FLA1 1.2 FLA1 1.5 FLA2 6.0 FLA1 5 t>2h t < 2h t < 2 mn 2s2h t < 2h t < 4 mn 4 s < t 10 s 20 t>2h t < 2h t < 8 mn 6 s < t 20 s 1 Time for a cold start (motor off and cold). 2 Time for warm start (motor running under normal conditions). Example: In class 20, the motor must have finished starting within 20 seconds (6 to 20 s) for a starting current of 6 x FLA. Asynchronous-Motor Starting Parameters The main parameters of direct on-line starting of three-phase asynchronous motors (90% of all applications) are listed below. t td • FLA: Full load amperes This is the current drawn by the motor at full rated load. • Id: locked rotor current This is the current drawn by the motor during starting, on average 6.0 x In for a duration of 5 to 30 seconds depending on the application. These values determine the trip class and any additional “long-start” protection devices that may be needed. • Id: peak starting current This is the subtransient current during the first two half-waves when the system is energized, on the average 14 In for 10 to 15 ms (e.g. 1840 A peak). Starting time t”d FLA Id I*d I Typical motor-starting curve The protection settings must effectively protect the motor, notably through a suitable overload relay trip class, but let the peak starting current through. Motor-Feeder Solutions PowerPact™ H-, J-, and L-frame circuit breakers motor circuit breakers are designed for motor-feeder solutions using: • • three devices, including an electronic MCP or 1.3 M instantaneous-only trip unit two devices including a 2 M electronic trip unit. 47 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection PowerPact H-, J-, and L-Frame with Micrologic™ Trip Units Motor-Protection Range PowerPact H-, J-, and L-frame circuit breakers with Micrologic trip units can be used to create motorfeeder solutions comprising two or three devices. The protection devices are designed for continuous duty at 104°F (40°C). Three-device solutions • • • 1 PowerPact circuit breaker with Micrologic 1.3 M trip unit 1 contactor overload relay Two-device solutions • • 1 PowerPact circuit breaker with a Micrologic 2 M electronic trip unit. 1 contactor Table 45: Motor Protection Specifications Type of Motor Protection 3 Devices (Circuit Breaker + Contactor + Overload Relay) 2 Devices (Circuit Breaker + Contactor) PowerPact H-, J-, or L-frame circuit breaker PowerPact L-frame 400/600 A PowerPact H-, J-, and L-Frame 100– 600 A Type 2 coordination with Contactor + overload relay Micrologic 1.3 M Electronic Trip Unit Contactor Micrologic 2 M Electronic Trip Unit 50 Trip Unit Type 270 290 310 330 348 FLA (A) 250 230 210 190 Separate Overload Relay Built-in, Class Class. Isd (x FLA) X 5 X 10 X 20 X Protection functions of PowerPact H-, J-, and L-frame circuit breaker Short-circuits X Overloads Special motor functions X X Phase unbalance X 48 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Electronic Motor Circuit Protectors (AC Only) PowerPact H- and J-frame Electronic Motor Circuit Protectors (MCP) are instantaneous-trip circuit breakers. They are designed to offer short circuit protection and are National Electrical Code® (NEC®) compliant when installed as part of a combination controller having motor overload protection. MCP circuit breakers accept the same accessories and terminals as the equivalent thermal-magnetic circuit breakers. (See Section 3 for Accessories.) The unique design of the PowerPact MCPs includes two rotary switches to allow quick setting adjustments based on the characteristics of the motor. The first rotary switch allows for Full Load Amperes (FLA) adjustment across the range of the frame size. The second rotary switch selects the type of motor protection based on Automatic 1 for Standard Efficiency or Automatic 2 for High Energy Efficient. When using the automatic settings the MCP microprocessor automatically adjusts the trip settings for both current and time to align with the start-up characteristic for the motor type, whether it is a standard or energy-efficient motor. This includes a dampening means to accommodate a transient motor in-rush current without nuisance tripping of the circuit breaker. Rotary switch 2 also allows for traditional motor protection from 8 to 13 times the selected FLA. The MCP rotary switches are detented and allow the device to be set to specific trip values within a typical accuracy range of +/-5%. (A) Full Load Amp Setting (FLA). (B) Instantaneous Trip Point Settings (Im). A B Standard dard Stan ient gy Effic ace Energie Efficente Energia Efici Ener Energy Efficient Energie Efficace Energia Eficiente Full Load Amp Settings 1. Determine the motor’s full-load current by referring to the nameplate on the motor. 2. Set the trip range by turning the FLA rotary switch to the setting closest to the motor’s full load current. Automatic Protection Settings The MCP microprocessor automatically adjusts the trip settings for both current and time to align with the start-up characteristics for the motor type selected. This includes a dampening means to accommodate a transient motor in-rush current without nuisance tripping of the circuit breaker. 49 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Figure 3: Automatic Protection Settings B A Auto Setting Motor Type / Tipo de Motor / Type de Moteur t Standard Dampening for Motor In-Rush Energy Efficient Energie Efficace Energia Eficiente I Manual Protection Settings The manual settings may be adjusted to multiples of current based on the rotary switch setting for motor Full Load Amps (FLA). Instantaneous = (FLA) x (Im) Trip Point For example, if FLA rotary switch is set to 20 and Im rotary switch is set to 9x, then the instantaneous trip point will be 180 A. A B A. Full Load Amp Setting (FLA). B. Instantaneous Trip Point Settings (Im). Standard Energy Efficient Energie Efficace Energia Eficiente See Tables 51 thru 53 for more information. Table 46: Frame H-Frame J-Frame H- and J-Frame Electronic Motor Circuit Protectors (MCP) Current Full Load Amperes Range J Interrupting L Interrupting Adjustable R Interrupting (See SCCR Table Below) (See SCCR Table Below) Instantaneous Suffix Trip Range Cat. No. Cat. No. Cat. No. 30 A 1.5–25 A 9–325 A M71 HJL36030M71 HLL36030M71 HRL36030M71 50 A 14–42 A 84–546 A M72 HJL36050M72 HLL36050M72 HRL36050M72 100 A 30–80 A 180–1040 A M73 HJL36100M73 HLL36100M73 HRL36100M73 150 A 58–130 A 348–1690 A M74 HJL36150M74 HLL36150M74 HRL36150M74 250 A 114–217 A 684–2500 A M75 JJL36250M75 JLL36250M75 JRL36250M75 • High Short Circuit Current Ratings (SCCR) The PowerPact MCP helps achieve the high UL508A Short Circuit Current Rating (SCCR) needed to meet NEC Article 409 requirements for industrial control panels. They deliver up to 100 kA at 480 Vac SCCR when used in combination with approved Square D™ NEMA or Schneider Electric™ IEC motor starters. Table 47: Short Circuit Current Ratings (SCCR) J Interrupting L Interrupting R Interrupting Contactor/Starter 200–240 Vac 480 Vac 600 Vac 200–240 Vac 480 Vac 600 Vac 200–240 Vac 480 Vac 600 Vac Tesys D-line and F-line 100 kA 65 kA 25 kA 100 kA 100 kA 50 kA 200 kA 200 kA 100 kA NEMA Type S 100 kA 65 kA 25 kA 100 kA 100 kA 50 kA 200 kA 200 kA 100 kA 50 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection ” Table 48: MCP Selection by HP Ratings of Induction-Type Squirrel-Cage and Wound-Rotor Motors Horsepower Rating of Induction-Type Squirrel-Cage and Wound-Rotor Motors 3Ø 60 Hz NEC Full Load Amperes Starter Size 200 Vac 230 Vac 480 Vac 575 Vac 1/2 0.9 A 1.1 A 1.3 A 1.7 A 2.1 A 2.2 A 2.4 A 2.5 A 2.7 A 3A 3.2 A 3.4 A 3.7 A 3.9 A 4.2 A 4.8 A 4.8 A 6A 6.1 A 6.8 A 6.9 A 7.6 A 7.8 A 9A 9.6 A 11 A 14 A 15.2 A 17 A 17.5 A 21 A 22 A 25.3 A 27 A 28 A 32 A 32.2 A 34 A 40 A 41 A 42 A 48.3 A 52 A 54 A 62 A 65 A 68 A 77 A 78.2 A 80 A 92 A 96 A 99 A 104 A 120 A 124 A 125 A 130 A 144 A 150 A 154 A 156 A 177.1 A 180 A 192 A 221 A 240 A 248 A 1/2 3/4 1 3/4 1 1/2 1-1/2 1/2 2 1-1/2 00 3/4 2 3/4 3 1 1 3 1-1/2 5 2 1-1/2 5 2 0 7-1/2 3 3 7-1/2 10 10 5 15 1 5 15 7-1/2 20 7-1/2 20 25 10 2 30 10 25 30 40 15 15 40 3 50 20 20 60 50 25 60 75 25 30 30 75 4 100 40 40 100 125 50 150 50 5 60 125 60 150 75 200 75 200 100 Shaded area is not covered by J-frame electronic motor circuit protector. PowerPact H-Frame and J-Frame Electronic MCP HJL36030M71 and HLL36030M71 1/2–10 hp HJL36050M72 and HLL36050M72 10–25 hp HJL36100M73 and HLL36100M73 15–50 hp HJL36150M74 and HLL36150M74 30–100 hp JJL36250M75 and JLL36250M75 50–150 hp 51 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Micrologic 1.3 M Electronic Trip Units for Instantaneous Protection Only (L-Frame Circuit Breakers Only) Micrologic 1.3 M trip units are used in 3-device motor-feeder solutions on PowerPact L-frame circuit breakers with performance levels G/J/L. They provide short-circuit protection for motors up to 250 kW at 400 V. Micrologic 1.3 M trip units provide instantaneous protection only, using electronic technology. They are dedicated to 600 A 3-pole (3P 3D) circuit breakers or 4-pole circuit breakers with detection on three poles (4P, 3D). They are especially used in 3-pole versions for motor protection. Circuit breakers equipped with Micrologic 1.3 M trip units, without thermal protection, are used in certain applications to replace automatic switches. Micrologic 1.3 M trip units are available on PowerPact L-frame circuit breakers only. NOTE: All Micrologic trip units have a transparent, sealable cover that protects access to the adjustment rotary switches. They also provide the benefits of electronic technology: • • • accurate settings tests “Ready” LED. Circuit breakers with a Micrologic 1.3 M trip unit are combined with a overload relay and a contactor. Protection settings are made using a rotary switch. Protection Version Three pole (3P): three pole frame circuit breakers equipped with detection on all three poles. Indications The green “Ready” LED blinks slowly when the electronic trip unit is ready to provide protection. It indicates the trip unit is operating correctly. NOTE: All the trip units have a transparent sealable cover that protects access to the adjustment rotary switches. 52 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Table 49: Micrologic 1.3 M Electronic Trip Unit Rating: In at 104°F (40°C)1 400 A 600 A Circuit Breaker PowerPact L-frame X X Pick-up (A) Isd Adjustable directly in amps accuracy ±15% There is a very short delay to let through motor starting currents 9 settings: 2000-2400-28003200-3600-4000-4800 A tsd Non-adjustable Non-tripping time Maximum break time 20 60 Short-time protection Time delay (ms) 9 settings: 3000-3600-42004800-5400-6000-6600-7200 A Instantaneous protection Pick-up (A) Ii non-adjustable 4800 accuracy ±15% Non-tripping time Maximum break time 0 30 ms 1 7200 Motor standards require operation at 104°F (40°C). Circuit-breaker ratings are derated to take this requirement into account Micrologic 2.2 M and 2.3 M Electronic Trip Units Micrologic 2.2 M and 2.3 M trip units provide built-in thermal and instantaneous protection. They are used in 2-device motor-feeder solutions on PowerPact H-, J-, and L-frame circuit breakers with performance levels J/L. They provide protection for motors up to 315 kW at 400 V against: • • • short-circuits overloads with selection of a trip class (5, 10 or 20) phase unbalance. 50 250 230 210 190 270 290 310 330 348 FLA (A) Class. Isd (x FLA) Circuit breakers with a Micrologic 2.2 M/ 2.3 M trip unit include protection similar to an inverse-time overload relay. They are combined with a contactor. Protection settings are made using a rotary switch. Overloads (or Thermal Protection) Long-time protection and trip class (FLA) • • • Inverse-time thermal protection against overloads with adjustable pick-up FLA. Settings are made in amperes. The tripping curve for the long-time protection, which indicates the time delay tr before tripping, is defined by the selected trip class. 53 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Trip Class • The class is selected as a function of the normal motor starting time. — Class 5: starting time less than 5 s — Class 10: starting time less than 10 s — Class 20: starting time less than 20 s • For a given class, it is necessary to check that all motor-feeder components are sized to carry the 6 x FLA starting current without excessive temperature rise during the time corresponding to the class. Short-Circuits Short-time protection (Isd) • • Provides protection with an adjustable pick-up Isd. There is a very short delay to let through motor starting currents. Non-adjustable instantaneous protection (li) • Instantaneous protection with non-adjustable pick-up li. Phase Unbalance or Phase Loss (lunbal) • This function opens the circuit breaker if a phase unbalance occurs: — that is greater than the 30% fixed pick-up Iunbal — following the non-adjustable time delay tunbal equal to: • 0.7 s during starting • 4 s during normal operation • Phase loss is an extreme case of phase unbalance and leads to tripping under the same conditions. Indications Front indications • The green “Ready” LED blinks slowly when the electronic trip unit is ready to provide protection. It indicates the trip unit is operating correctly. • Red alarm LED for motor operation goes ON when the thermal image of the rotor and stator is greater than 95% of the permissible temperature rise. Remote indications using SDTAM module • PowerPact H-, J-, and L-frame devices with a Micrologic 2 M trip unit can be equipped with an SDTAM module dedicated to motor applications for: — a contact to indicate circuit-breaker overload — a contact to open the contactor. In the event of a phase unbalance or overload, this output is activated 400 ms before circuit-breaker tripping to open the contactor and avoid circuit breaker tripping • This module takes the place of the shunt trip (MN)/undervoltage trip (MX) coils and an auxiliary switch (OF) contact SDTAM remote indication relay module with its terminal block. Note: All the trip units have a transparent sealable cover that protects access to the adjustment rotary switches. 54 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Table 50: Micrologic 2.2 M and 2.3 M Electronic Trip Unit Rating: In at 104°F (40°C)1 Circuit Breaker 30 A 50 A 100 A 150 A 250 A 400 A 600 A PowerPact H-frame X X X X — — — PowerPact J-frame — — — — X — — PowerPact L-frame — — — — — X X Overloads (or Thermal Protection): Long-Time Protection and Trip Class Value depending on trip unit rating (In) and setting on rotary switch FLA Pick-Up (A) Tripping between 1.05 and 1.20 FLA In = 30 A FLA = 14 16 18 20 21 22 23 24 25 In = 50 A FLA = 14 17 21 24 27 29 32 36 42 In = 100 A FLA = 30 35 41 45 51 56 63 71 80 In = 150 A FLA = 58 71 78 86 91 97 110 119 130 In = 250 A FLA = 114 137 145 155 163 172 181 210 217 In = 400 A FLA = 190 210 230 250 270 290 310 330 348 In = 600 A FLA = 312 338 364 390 416 442 468 484 520 12 13 Time Delay Trip Class Time Delay (s) Depending on selected trip class tr 5 10 20 1.5 x FLA 120 240 480 6 x FLA 6.5 13.5 26 For cold start 7.2 x FLA 5 10 20 For cold start 7 8 9 10 11 1500 2250 3750 4800 7200 For warm start S Short Circuits: Short-time protection with fixed time delay Pick-up (A) accuracy ±15% Time delay (ms) Isd = FLA x 5 6 tsd Non-adjustable Non-tripping time 20 Maximum break time 60 I Short Circuit: Non-adjustable instantaneous protection Pick-up (A) accuracy ±15% Time delay (ms) Ii non-adjustable 450 Non-tripping time 0 Maximum break time 30 ms 750 Phase unbalance or phase loss Pick-up (A) accuracy ±20% Iunbal in % average current2 30% Time delay (ms) Non-adjustable 0.7 s during starting 4 s during normal operation 1 Motor standards require operation at 104°F (40°C). Circuit-breaker ratings are derated to take this requirement into account. 2 The unbalance measurement takes into account the most unbalanced phase with respect to the average current. 55 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Additional Technical Characteristics Table 51: Additional Technical Characteristics An unbalance in three-phase systems occurs when the three voltages are not equal in amplitude and/or not displaced 120° with respect to each other. It is generally due to single-phase loads that are incorrectly distributed throughout the system and unbalance the voltages between the phases. IA (VA) Phase unbalance These unbalances create negative current components that cause braking torques and temperature rise in asynchronous machines, thus leading to premature aging. Phase loss is a special case of phase unbalance. • During normal operation, it produces the effects mentioned above and tripping must occur after four seconds. • During starting, the absence of a phase may cause motor reversing, i.e. it is the load that determines the direction of rotation. This requires virtually immediate tripping (0.7 seconds). Starting time in compliance with the class (Micrologic 2 M) IB (VB) IC (VC) Unbalance of Phase Currents and Voltages For normal motor starting, Micrologic 2 M checks the conditions below with respect to the thermal-protection (long-time) pick-up FLA: Phase loss • • Motor-Off zone current > 10% x FLA (motor-off limit) overrun of 1.5 x FLA threshold, then return below this threshold before the end of a 10 s time delay. If either of these conditions is not met, the thermal protection trips the device after a maximum time equal to that of the selected class. Pick-up FLA must have been set to the current indicated on the motor rating plate. 1 to 200 s Return Long Start Time Limit For normal motor starting, Micrologic 2 M checks the conditions below with respect to the thermal-protection (long-time) pick-up FLA: Starting Time • • Starting time in compliance with the class (Micrologic 2 M) If either of these conditions is not met, the thermal protection trips the device after a maximum time equal to that of the selected class. Overrun 10 % FLA current > 10% x FLA (motor-off limit) overrun of 1.5 x FLA threshold, then return below this threshold before the end of a 10 s time delay FLA 1.5 FLA (Micrologic 2-M) or Ilong (Micrologic 6 E-M) Pick-up FLA must have been set to the current indicated on the motor rating plate. Motor Starting and Long Starts Table 52: L-Frame Electronic Trip Unit Magnetic Only 3 Pole, 600 Vac, 50/60 Hz—Three Device Solutions1 Sensor Rating PowerPact L-Frame Trip Unit 400 600 1.3 M Adjustable2 G-Interrupting Trip Range (A) Cat. No. J-Interrupting Cat. No. L-Interrupting Cat. No. R-Interrupting Cat. No. 500–1200% LGL36400M37X LJL36400M37X LLL36400M37X LRL36400M37X 500–1200% LGL36600M37X LJL36600M37X LLL36600M37X LRL36600M37X 1 Three-device solutions are the traditional solutions: motor circuit protector plus motor starter plus overload relay. 2 UL magnetic trip tolerances are -20%/+30% from the nominal values shown. 56 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Motor Circuit Protection Table 53: H-Frame (150 A), J-Frame (250 A) and L-Frame (600 A) Electronic Motor Protector Circuit Breakers (UL Ratings)—Two Device Solutions1 Electronic Full Load Sensor Trip Trip Unit Frame Amperes Isd (x FLA) Rating Unit Type Range (FLA) H-Frame Standard2 L-Frame J Interrupting Cat. No. L Interrupting Cat. No. R Interrupting Cat. No. 30 14–25 5-13 x FLA HGL36030M38X HJL36030M38X HLL36030M38X HRL36030M38X 50 14–42 5-13 x FLA HGL36050M38X HJL36050M38X HLL36050M38X HRL36050M38X 30–80 5-13 x FLA HGL36100M38X HJL36100M38X HLL36100M38X HRL36100M38X 58–130 5-13 x FLA HGL36150M38X HJL36150M38X HLL36150M38X HRL36150M38X 100 2.2 M 150 J-Frame G Interrupting Cat. No. 250 114–217 5-13 x FLA JGL36250M38X JJL36250M38X JLL36250M38X JRL36250M38X 400 190–348 5-13 x FLA LGL36400M38X LJL36400M38X LLL36400M38X LRL36400M38X 312–520 5-13 x FLA LGL36600M38X LJL36600M38X LLL36600M38X LRL36600M38X 600 2.3 M 1 Two-device solutions (these electronic motor protector circuit breakers include short circuit and overload protection) —1 electronic motor circuit protector with a Micrologic 2.2 M electronic trip unit, plus —1 contactor 2 The standard trip unit offers Class 5, 10 and 20 and phase unbalance or phase loss protection. 57 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Section 6—Trip Units Available Trip Units • PowerPact™ H-, J-, and L-Frame circuit breakers offer a range of thermal-magnetic and Micrologic™ electronic trip units in interchangeable cases. Thermal-magnetic trip units are designed to open automatically under overload or short circuit. H-frame and J-frame thermalmagnetic circuit breakers contain individual thermal (overload) and instantaneous (short circuit) sensing elements in each pole. • Micrologic electronic trip units provide intelligent operation, with wide setting ranges make installation upgrades easier. Designed with processing capabilities, Micrologic trip units can provide measurement information and device operating assistance to supply all of the information required to manage the electrical installation and optimize energy use. Micrologic trip units offer excellent measurement accuracy, using a new generation of current transformers combining “iron-core” sensors for self-powered electronics and “air-core” sensors (Rogowski coils) for measurements. The protection functions are managed by an ASIC component that is independent of the measurement functions. This independence ensures immunity to conducted and radiated disturbances and a high level of reliability. An LED on the front of the electronic trip units indicates the result of the self-test running continuously on the measurement system and the tripping release. When the green LED is flashing, the links between the CTs, the processing electronics and the Mitop release are operational. The circuit breaker is ready to protect. A minimum current of 15 to 50 A, depending on the device, is required for this function. The dual adjustment for protection functions on Micrologic 5 / 6 consists of: — an adjustment using rotary switches sets the maximum value — an adjustment, made using the keypad or remotely, fine-tunes the setting. This setting may not exceed the first one. It can be read directly on the Micrologic screen, to within one ampere and a fraction of a second. NOTE: All the trip units have a transparent sealable cover that protects access to the adjustment rotary switches. 58 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 54: Understanding the Names of Micrologic Electronic Trip Units Protection Frame Measurements Applications H- and J-frame A: Ammeter Ir tr Isd tsd Ii Ig tg 1: I DIstribution 3: LI or LSI 200 5: LSI 6: LSIG A or M: Motors N 1/A 2/B 3/C L-frame E: Energy Ir L: Long time tr Isd tsd Ii (x In S: Short time 255 I: Instantaneous G: Ground fault kWh N 1/A 2/B 3/C Examples Micrologic 1.3 M Trip Unit Instantaneous only 400 or 600 A Motor Micrologic 3.3 Trip Unit LI 250, 400, or 600 A Distribution Micrologic 3.2S Trip Unit LSI 60, 100, 150, or 250 A Distribution Micrologic 5.2A Trip Unit LSI—Ammeter 60, 100, 150, or 250 A Distribution For Micrologic trip unit features, see table 9 on page 20. 59 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 55: Trip Unit Availability H-, J-Frame Trip Unit Trip Unit >30 .9 4 .9 5 .9 6 .9 7 .9 3 5 .2 E 0 >11 .9 8 .9 2 .9 % Ir A >30 Trip Unit Io ) 5 6 8 2 10 1 .5 x Is d( Ir ) 2500 1250 Distribution Protection Thermal-Magnetic Trip Unit 1 Ir 4( x 3 2 .5 M icor lo g ic Trip Unit Type L-Frame 250A T-M N/A lm (= li) ln 3.2 Distribution Protection LI 30 35 40 25 45 20 50 15 60 Micrologic 3.2 and 3.2-W Ir (A) 8 16 4 2 4 6 16 1 .5 16 tr 10 12 1.5 tr @ 6 Ir 8 3 2 15 Ii (x In) Ir Ii Micrologic 3.3 and 3.3-W 200 225 250 300 2 350 1 150 125 8 4 175 16 5 4 6 3 16 .5 450 8 10 12 2 1.5 16 Tr @ 6 Ir Ir (A) Ii (x In) Ii 3.3S Micrologic 3.2S Distribution Protection LSI Fixed ST and LT delays 30 35 40 25 45 20 50 15 60 Micrologic 3.2S and 3.2S-W Ir (A) 4 5 6 4 6 3 8 2 1.5 10 12 Isd (x In) 8 3 2 tr 10 12 1.5 tsd 15 Ir Isd Ii Ii (x In) Micrologic 3.3S and 3.3S-W 200 225 250 300 Ir (A) 5 4 8 tr 6 3 10 12 2 1.5 450 125 6 3 350 150 5 4 175 8 10 12 2 1.5 tsd Ii (x In) Isd (x In) Ir Isd Ii Micrologic 5.2 A and 5.2 A-W 30 35 45 50 60 6 4 200 175 10 2 1.5 Distribution Protection LSIG + Ammeter 12 15 Micrologic 5.3 E and 5.3 E-W 30 35 25 4 40 45 50 60 20 15 6 2 1.5 Ig Magnetic Only 12 15 150 125 Ii (x In) Standard tr 8 225 tsd Ir Isd Ii 250 300 2 1.5 Ir tr Isd tsd Ii(xIn) Ig tg 350 Ir (A) 400 5 6 8 3 Micrologic 6.3 E and 6.3 E-W M 6 10 12 Ii (x In) 6.3 A Micrologic 200 175 4 Motor Circuit Protection 350 400 5 4 10 Distribution Protection Micrologic 6.2 E LSIG + Energy Monitoring and 6.2 E-W 250 300 3 2 1.5 Micrologic 6.3 A and 6.3 A-W tg 8 3 225 150 125 Ii (x In) Micrologic 5.2 E and 5.2 E-W Micrologic 6.2 A and 6.2 A-W 5.3 A Micrologic 8 3 Distribution Protection LSI + Energy Monitoring Micrologic 5.3 A and 5.3 A-W 40 25 20 15 6.2E Distribution Protection LSI + Ammeter 10 12 Ii (x In) N/A Energy Efficient Energie Efficace Energia Eficiente 1.3 M Micrologic Motor Protection Micrologic 1 M N/A Micrologic 1.3M 3200 2800 36004000 2400 2000 4400 4800 Isd (A) 2.2 M Micrologic Motor Protection Micrologic 2 M Micrologic 2.2 M 2.3M Micrologic 50 Ii=3750 163 172 181 210 217 FLA (A) 155 145 137 114 Class. Isd (x FLA) FLA Isd Micrologic 2.3 M 270 290 310 330 348 FLA (A) 250 230 210 190 Class. Isd (x FLA) FLA Isd NOTE: W = mission critical trip unit. 60 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Protection of Distribution Systems Thermal-Magnetic Trip Units TM thermal-magnetic trip units can be used on PowerPact H and J-frame circuit breakers with interrupting levels D/G/J/L. Thermal-magnetic trip units are available in factory sealed or field-interchangeable constructions. t 2500 1250 250A 0 ln l li H-Frame Trip Curve (ln) Fixed threshold thermal protection against overload (li) Fixed threshold instantaneous protection against short circuits lm (= li) ln Table 56: H-Frame and J-Frame 3P Field-Installable Thermal-Magnetic Trip Unit 15–60 A H-Frame 70–150 A H-Frame 150–250 A J-Frame Amperage Cat. No. Amperage Cat. No. Amperage 15 A HT3015 70 A HT3070 150 A JT3150 20 A HT3020 80 A HT3080 175 A JT3175 1125A 60A (li) (ln) H-Frame Trip Unit 2500 1250 250A (lm) Cat. No. 25 A HT3025 90 A HT3090 200 A JT3200 30 A HT3030 100 A HT3100 225 A JT3225 JT3250 (ln) J-Frame Trip Unit 35 A HT3035 110 A HT3110 250 A 40 A HT3040 125 A HT3125 — — 45 A HT3045 150 A HT3150 — — 50 A HT3050 — — — — 60 A HT3060 — — — — 61 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Micrologic 3 Trip Units Micrologic 3 trip units can be used on PowerPact H-, J-, and L-Frame circuit breakers with performance levels D/G/J/L. 3.2 30 35 40 25 45 20 50 15 60 Ir (A) 8 16 4 2 4 6 1 .5 8 16 1.5 tr @ 6 Ir tr 10 12 3 2 16 15 Ii (x In) Ir Ii They provide: • • standard protection of distribution cables indication of: — overloads (using LEDs) — overload tripping (using the SDx relay module). Circuit breakers equipped with Micrologic 3 trip units can be used to protect distribution systems supplied by transformers. Protection Settings are made using the adjustment rotary switches. Overloads: Long time protection (Ir) Inverse time protection against overloads with an adjustable current pick-up Ir set using a rotary switch and an adjustable time delay tr. Neutral protection • • On 3-pole L-frame circuit breakers, neutral protection is not possible. On four-pole L-frame circuit breakers, neutral protection may be set using a three-position switch: — switch position 4P 3D: neutral unprotected — switch position 4P 3D + N/2: neutral protection at half the value of the phase pick-up, (0.5 x Ir) — switch position 4P 4D: neutral fully protected at Ir 200 225 250 300 2 350 1 175 150 125 450 Ir (A) 4 8 16 4 5 6 3 16 .5 16 Tr @ 6 Ir 8 2 1.5 10 12 Ii (x In) Ii Indicators Front indicators Front Indicators • The green “Ready” LED blinks slowly when the electronic trip unit is ready to provide protection. It indicates the trip unit is operating correctly. • • Orange overload pre-alarm LED: steady on when I > 90% Ir Red overload LED: steady on when I > 105% Ir Remote indicators x SDX Module An overload trip signal can be remotely checked by installing an SDx relay module inside the circuit breaker. This module receives the signal from the Micrologic electronic trip unit through an optical link and makes it available on the terminal block. The signal is cleared when the circuit breaker is reclosed. See page 98. 62 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 57: Micrologic 3 Trip Unit Ratings Circuit Breaker In at 104°F (40°C)1 60 A 100 A 150 A 250 A 400 A 600 A H-frame X X X J-frame X L-frame X Micrologic 3.2 / 3.3 trip X X units2 L Long-time protection Ir Value depending on sensor rating (In) and setting on rotary switch In =60 A Ir = 15 20 25 30 35 40 45 50 60 Pick-Up (A) In = 100 A Ir = 35 40 45 50 60 70 80 90 100 Tripping between 1.05 and 1.20 Ir In = 150 A Ir = 50 60 70 80 90 100 110 125 150 In = 250 A Ir = 70 80 100 125 150 175 200 225 250 In = 400 A Ir = 125 150 175 200 225 250 300 350 400 In = 600 A Ir = 200 225 250 300 350 400 450 500 600 0.5 1 2 4 8 16 tr Time Delay (s) 1.5 x Ir 15 25 50 100 200 400 Accuracy 0 to -20% 6 x Ir 0.5 1 2 4 8 16 7.2 x Ir 0.35 0.7 1.4 2.8 5.5 11 Thermal memory 20 minutes before and after tripping I Instantaneous Pick-up (A) Ii x accuracy ± 15% 60 A 1.5 2 3 4 6 8 10 12 15 100 A 1.5 2 3 4 6 8 10 12 15 150 A 1.5 2 3 4 6 8 10 12 15 250 A 1.5 2 3 4 5 6 8 10 12 400 A 1.5 2 3 4 5 6 8 10 12 600 A 1.5 2 3 4 5 6 8 10 11 Non-tripping time Maximum break time 10 ms 50 ms for I > 1.5 Ii Micrologic 3.2S / 3.3S trip units2 L Long-time protection Ir Value depending on sensor rating (In) and setting on rotary switch In =60 A Ir = 15 20 25 30 35 40 45 50 60 Pick-Up (A) In = 100 A Ir = 35 40 45 50 60 70 80 90 100 Tripping between 1.05 and 1.20 Ir In = 150 A Ir = 50 60 70 80 90 100 110 125 150 In = 250 A Ir = 70 80 100 125 150 175 200 225 250 In = 400 A Ir = 125 150 175 200 225 250 300 350 400 In = 600 A Ir = 200 225 250 300 350 400 450 500 600 non-adjustable tr Time Delay (s) 1.5 x Ir 400 Accuracy 0 to -20% 6 x Ir 16 7.2 x Ir 11 Thermal memory 20 minutes before and after tripping S Short-time protection Pick-up (A) accuracy ± 10% Isd - Ir x... 1.5 tsd non-adjustable Non-tripping time Maximum break time 20 80 Pick-up (A) Ii x In 1.5 accuracy ± 15% Non-tripping time Maximum break time 10 ms 50 ms for I > 1.5 Ii Time delay (ms) 2 3 4 5 6 7 8 10 3 4 6 8 10 12 15 I Instantaneous 2 1 If the trip units are used in high-temperature environments, the Micrologic trip unit setting must take into account the thermal limitations of the circuit breaker. See the temperature derating information on page 129. 2 Mission Critical trip units have a “-W” at the end of the number (for example 3.2-W). All other protections are the same and have the same trip curves. 63 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Micrologic 5 / 6 A or E Trip Units Micrologic 5 / 6 A (Ammeter) or E (Energy) trip units can be used on PowerPact H-, J-, and L-frame circuit breakers with performance levels D, G, J, or L. They all have a front display module. They offer basic LSI protection (Micrologic 5 trip unit) or LSI and ground-fault protection G (Micrologic 6 trip unit). They also offer measurement, alarm and energy values. Measurement Display Settings Maintenance 35 40 45 50 60 20 15 4 6 tg 8 3 2 1.5 Ig 6.2E 30 25 10 12 15 Ii (x In) The capabilities of Micrologic 5 / 6 A and E trip units come into full play with the front display module. When the two are connected using a simple cable with RJ45 connectors, the combination offers full Power Meter capabilities and all the measurements required to monitor the electrical installation. Measurements Operating and Maintenance Assistance Communication Network Indicators, alarms and histories Current measurements Ammeter (Micrologic A Trip Unit) • • • • • Phase and neutral currents IA, IB, IC, IN Average current of the 3 phases Iavg Highest current of the three phases Imax Ground-fault current Ig (Micrologic 6.2 / 6.3 A) trip units Maximum and minimum current measured • • • • Fault types Alarms for high/low alarm thresholds linked to I measurements Trip, alarm and operating histories Time-stamped tables for settings and maximum current Maintenance indicators • • • • Modbus with add-on module Operation, trip and alarm counters Operating hours counter Contact wear Load profile and thermal image Current measurements • • • • • • Phase and neutral currents IA, IB, IC, IN Average current of the 3 phases Iavg Highest current of the three phases Imax Ground-fault current Ig (Micrologic 6.2 / 6.3 A trip units) Maximum and minimum current measured Current unbalance between phases Voltage measurements • • • Phase-to-phase (V) and phase-to-neutral (U) voltages Average voltages Vavg, Uavg Ph-Ph (V) and Ph-N (U) voltage unbalance Frequency measurements Energy (Micrologic E Trip Unit) • Frequency (f) Power-quality indicators • Total harmonic distortion (THD) for current and voltage Power measurements • • Active, reactive and apparent power, total and per phase Power factor and cos ij Indicators, alarms and histories • • • • Fault types Alarms for high/low thresholds linked to I, V, f, P, E measurements Trip, alarm and operating histories Time-stamped tables for settings and I, V, f, P, E maximum values Modbus with add-on module Maintenance indicators • • • • Operation, trip and alarm counters Operating hours counter Contact wear Load profile and thermal image Maximum and minimum • For all I, V, f, P, E measurements Demand current and power measurements • • Demand values, total and per phase Maximum demand Energy metering • Active, reactive and apparent energy, total and per phase 64 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Power Requirements The amount of current needed to power the trip unit is printed in the upper left hand corner of the trip unit by the Ready LED. Table 58: Trip Unit Power Requirements Frame H-Frame, 60 A J-Frame, 250A L-Frame, 600 A Power-Up Requirement 60 A > 15 A 100 A > 15 A 150 A > 30 A 250A > 30 A 400 A > 50 A 600 A > 50 A Protection Settings can be adjusted in two ways, using the rotary switches and/or the keypad. • The keypad can be used to make fine adjustments in 1 A steps below the maximum value defined by the setting on the rotary switch. • Access to setting modifications using the keypad is protected by a locking function displayed on the screen and controlled by a microswitch. • • • The lock is activated automatically if the keypad is not used for 5 minutes. Access to the microswitch is protected by a transparent, sealable cover. With the cover closed, it is still possible to display the various settings and measurements using the keypad. Overloads: Long-Time Protection (Ir) Inverse time protection against overloads with an adjustable current pick-up Ir is set using a rotary switch or the keypad for fine adjustments. The time delay tr is set using the keypad. Short-Circuits: Short-Time Protection (Isd) Short-circuit protection with an adjustable pick-up Isd and adjustable time delay tsd, with the possibility of including a portion of an inverse time curve (I2t On). Short-Circuits: Instantaneous Protection (Ii) Instantaneous protection with adjustable pick-up Ii. Additional Ground Fault Protection (Ig) on Micrologic 6 Trip Units Residual type ground-fault protection with an adjustable pick-up Ig and adjustable time delay tg. Possibility of including a portion of an inverse time curve (I2t On). Neutral Protection • On 4-pole circuit breakers, this protection can be set using the keypad: — Off: neutral unprotected — 0.5: neutral protection at half the value of the phase pick-up (0.5 x Ir) — 1.0: neutral fully protected at Ir — OSN: Oversized neutral protection at 1.6 times the value of the phase pick-up. Used when there is a high level of 3rd order harmonics (or orders that are multiples of 3) that accumulate in the neutral and create a high current. In this case, the device must be limited to Ir = 0.63 x In for the maximum neutral protection setting of 1.6 x Ir. • With 3-pole circuit breakers, the neutral can be protected by installing an external neutral sensor with the output (T1, T2) connected to the trip unit. 65 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Zone Selective Interlocking (ZSI) A ZSI terminal block may be used to interconnect a number of Micrologic trip units to provide zone selective interlocking for short-time (Isd) and ground-fault (Ig) protection, without a time delay. For PowerPact H- and J-frame circuit breakers, the ZSI function is available only in relation to the upstream circuit breaker (ZSI out). For PowerPact L-frame circuit breakers, the ZSI function is available in relation to the upstream circuit breaker (ZSI out) and downstream circuit breakers (ZSI in). Display of Type of Fault. On a fault trip, the type of fault (Ir, Isd, Ii, Ig), the phase concerned and the interrupted current are displayed. An external power supply is required. Isd Fault Fault Phase Interrupted Current Display of Interrupted Current. Indicators Front Indicators Green LED Yellow LED Red LED • The green “Ready” LED blinks slowly when the electronic trip unit is ready to provide protection. It indicates the trip unit is operating correctly. • • Orange overload pre-alarm LED stays on when I > 90% Ir Red overload LED stays on when I > 105% Ir Remote Indicators An SDx relay module installed inside the circuit breaker can be used to remote the following information: • • overload trip overload prealarm (Micrologic 5 trip units) or ground fault trip (Micrologic 6 trip units). This module receives the signal from the Micrologic electronic trip unit through an optical link and makes it available on the terminal block. The signal is cleared when the circuit breaker is closed. Note: all the trip units have a transparent sealable cover. These outputs can be reprogrammed to be assigned to other types of tripping or that protects access to the adjustment rotary switch. The module is described in detail in the section dealing with accessories. x SDx Module 66 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 59: Micrologic 5/6 Trip Unit1 Ratings Circuit Breaker In at 104°F (40°C)2 60 A 100 A 150 A H-frame X X X J-frame 250 A 400 A 600 A X X X L-frame L Long-time protection Ir rotary switch Value depending on the trip unit rating (In) and setting on rotary switch In = 60 A Ir = 15 20 25 30 35 40 45 50 60 Pick-up (A) In = 100 A Ir = 35 40 45 50 60 70 80 90 100 tripping between 1.05 and 1.20 Ir In = 150 A Ir = 50 60 70 80 90 100 110 125 150 In = 250 A Ir = 70 80 100 125 150 175 200 225 250 In = 400 A Ir = 125 150 175 200 225 250 300 350 400 225 250 300 350 400 450 500 600 In = 600 A tr = Time Delay (s) Accuracy 0 to -20% Ir = 200 keypad setting Fine adjustment in 1 A steps below maximum value set on rotary switch keypad setting 0.5 1 2 4 8 1.5 x Ir 15 25 50 100 200 400 6 x Ir 0.5 1 2 4 8 16 7.2 x Ir 0.35 0.7 1.4 2.8 5.5 11 Thermal memory 16 20 minutes before and after tripping S Short-time protection Pick-up (A) accuracy ± 10% Time delay Isd keypad setting tsd = Keypad setting 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 Fine adjustment in 0.5 x Ir steps using the keypad I2t Off 0 0.1 s 0.2 s 0.3 s I2t On — 0.1 s 0.2 s 0.3 s 0.4 s Non-tripping time 20 ms 80 ms 140 ms 230 ms 350 ms Maximum break time 80 ms 140 ms 200 ms 320 ms 500 ms 60 A 1.5 2 .3 4 6 8 10 12 15 100 A 1.5 2 .3 4 6 8 10 12 15 150 A 1.5 2 .3 4 6 8 10 12 15 250 A 1.5 2 .3 4 5 6 8 10 12 400 A 1.5 2 .3 4 5 6 8 10 12 600 A 1.5 2 .3 4 5 6 8 10 11 0.4 s I Instantaneous Pick-up (A) Ii = In x Rotary Switch accuracy ± 15% Non-tripping time Maximum break time 10 ms 50 ms for I > Ii G Ground-fault protection - for Micrologic 6 A or E Trip Units Pick-up (A) accuracy ± 10% Ig Keypad Setting In= 60 A Ig = 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 In= 100–600 A Ig = 0.2 2.5 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.3 0.4 tg = Time delay (s) Test Keypad setting I2t Off 0 0.1 0.2 I2t On — 0.1 0.2 0.3 0.4 Non-tripping time 20 80 140 230 350 Maximum break time 80 140 200 320 500 Ig function Built in 0.95 1 1 Mission Critical trip units have a “-W” at the end of the number (for example 3.2-W). All other protections are the same and have the same trip curves. 2 If the trip units are used in high-temperature environments, the Micrologic trip unit setting must take into account the thermal limitations of the circuit breaker. See the temperature derating information on page 129. 67 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 60: Micrologic 3 Field-Installable Trip Units1 Circuit Breaker Frame H-frame J-Frame Standard UL/CSA/NOM UL/CSA/NOM Trip Unit Type Catalog No. 60 A Micrologic 3.2 HE3060U31X 60 A Micrologic 3.2S HE3060U33X 3P 100 A Micrologic 3.2 HE3100U31X 3P 100 A Micrologic 3.2S HE3100U33X 3P 150 A Micrologic 3.2 HE3150U31X 3P 150 A Micrologic 3.2S HE3150U33X 3P 250 A Micrologic 3.2 JE3250U31X 3P 250 A Micrologic 3.2S JE3250U33X Micrologic 3.3 LE3250U31X Micrologic 3.3S LE3250U33X Micrologic 3.3 LE3400U31X Micrologic 3.3S LE3400U33X Micrologic 3.3 LE3600U31X Micrologic 3.3S LE3600U33X Micrologic 3.3 LE4250U31X Micrologic 3.3S LE4250U33X Micrologic 3.3 LE4400U31X Micrologic 3.3S LE4400U33X Micrologic 3.3 LE4600U31X Micrologic 3.3S LE4600U33X Poles Rating 3P 3P 250 A 3P 400 A 600 A L-Frame UL/CSA/NOM 250 A 4P 400 A 600 A 1 Mission Critical trip units that end in “W” are factory sealed and are not available as field installable units. 68 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 61: Micrologic 5 and 6 Field-Installable Trip Units1 Circuit Breaker Frame Standard Poles 60 A H-frame UL/CSA/NOM 100 A 3P 150 A J-Frame UL/CSA/NOM 3P 250 A 400 A UL/CSA/NOM 3P 600 A L-Frame 400 A UL/CSA/NOM 4P 600 A 1 Trip Unit Type Catalog No. Micrologic 5.2 A HE3060U43X Micrologic 6.2 A HE3060U44X Micrologic 5.2 E HE3060U53X Micrologic 6.2 E HE3060U54X Micrologic 5.2 A HE3060U43X Micrologic 6.2 A HE3100U44X Micrologic 5.2 E HE3100U53X Rating Micrologic 6.2 E HE3100U54X Micrologic 5.2 A HE3150U43X Micrologic 6.2 A HE3150U44X Micrologic 5.2 E HE3150U53X Micrologic 6.2 E HE3150U54X Micrologic 5.2 A JE3250U43X Micrologic 6.2 A JE3250U44X Micrologic 5.2 E JE3250U53X Micrologic 6.2 E JE3250U54X Micrologic 5.3 A LE3400U43X Micrologic 6.3 A LE3400U44X Micrologic 5.3 E LE3400U53X Micrologic 6.3 E LE3400U54X Micrologic 5.3 A LE3600U43X Micrologic 6.3 A LE3600U44X Micrologic 5.3 E LE3600U53X Micrologic 6.3 E LE3600U54X Micrologic 5.3 A LE4400U43X Micrologic 6.3 A LE4400U44X Micrologic 5.3 E LE4400U53X Micrologic 6.3 E LE4400U54X Micrologic 5.3 A LE4600U43X Micrologic 6.3 A LE4600U44X Micrologic 5.3 E LE4600U53X Micrologic 6.3 E LE4600U54X Mission Critical trip units that end in “W” are factory sealed and are not available as field installable units. Table 62: Micrologic Spare Parts Description LCD Display Frame H/J/L Micrologic 3 L H/J Micrologic 5/6 L Trip Unit Wire Seal Catalog No. S429483 Micrologic 6 H/J Trip Unit Cover-Transparent Trip Unit Micrologic 5 H Micrologic 3/5/6 S429484 S429481 S432461 S429478 S432459 MICROTUSEAL 69 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Power Meter Functions In addition to protection functions, Micrologic 5 / 6 trip units offer all the functions of Power Meter products as well as operating-assistance for the circuit breaker. • • display of settings measurement functions: — Ammeter (A) — Energy (E) • • • • alarms time-stamped histories and event tables maintenance indicator communication network. Micrologic A and E trip unit measurement functions are made possible by the trip unit intelligence and the accuracy of the sensors. They are handled by a microprocessor that operates independent of protection functions. Display Micrologic Trip Unit LCD The user can display all the protection settings and the main measurements on the LCD screen of the trip unit. • • Micrologic A trip unit: instantaneous rms current measurements Micrologic E trip unit: voltage, frequency and power measurements and energy metering, in addition to the measurements offered by Micrologic A 0 >11 % Ir .9 4 . 9 5 .9 6 .9 7 .9 3 .9 8 .9 2 .9 1 Ir (4x Io ) 5 3 6 2 .5 8 2 10 1 .5 Is d( x Ir ) M icor lo g ic >30 A >30 5 .2 E To make the display available under all conditions and increase operating comfort, an external power supply is recommended for Micrologic A trip unit. It is indispensable to: Trip Unit LCD • • • display faults and interrupted current measurements use all the functions of Micrologic E trip unit (such as metering of low power and energy values) ensure operation of the communication network. The external power supply can be shared by several devices. For description, see page 83. Front Display Module (FDM121) Main menu Quick view Metering Alarms Services ESC OK FDM121 Display An FDM121 can be connected to a Micrologic trip unit using a prefabricated cable to display all measurements on a screen. The result is a veritable 96 x 96 mm Power Meter. In addition to the information displayed on the Micrologic trip unit LCD, the FDM121 screen shows demand, power quality and maximum/minimum values along with alarms, histories and maintenance indicators. The FDM121 requires a 24 Vdc power supply. The Micrologic trip unit is supplied by the same power supply through the cable connecting it to the FDM. PC Screen When the Micrologic trip unit, with or without a front display module, is connected to a communication network, all information can be accessed using a PC with the appropriate software installed. 70 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Measurements 06114156 Instantaneous RMS Measurements I IA 431 A IB 385 A IC 426 A IN 2A ESC In the event of a fault trip, the current interrupted is memorized. 888 06114155 Current I IA IB IC 100 120 385 A 100 120 426 A 100 120 2A 100 120 IN ESC Every instantaneous measurement provided by Micrologic A or E trip unit can be associated with a maximum/minimum. The maximum for the highest current of the three phases and neutral, the demand current and power can be reset using the trip unit keypad, the front display module or the communication network. Energy Metering Voltage PQS 5/7 127 kW Ptot Qtot 13 kVAr Stot 129 kVA ESC Power Energy 6/7 11318 kWh 257 kVArh Eq Es The Micrologic A trip unit measures phase, neutral, ground fault currents. The Micrologic E trip unit offers voltage, frequency and power measurements in addition to the measurements provided by Micrologic A trip unit. Maximum / Minimum Values 431 A Ep The Micrologic A and E trip units continuously display the RMS value of the highest current of the three phases and neutral (Imax). The navigation buttons can be used to scroll through the main measurements. 13815 kVAh The Micrologic E trip units also measures the energy consumed since the last reset of the meter. The active energy meter can be reset using the keypad and the front display module or the communication network. Demand and Maximum Demand Values Micrologic E trip units also calculates demand current and power values. These calculations can be made using a block or sliding interval that can be set from 5 to 60 minutes in steps of 1 minute. The window can be synchronized with a signal sent through the communication network. Whatever the calculation method, the calculated values can be recovered on a PC using the Modbus™ communication network. Ordinary spreadsheet software can be used to provide trend curves and forecasts based on this data. They will provide a basis for load shedding and reconnection operations used to adjust consumption to the subscribed power. Power Quality ESC Consumption Micrologic E trip units calculate power quality indicators taking into account the presence of up to the 15th order, including the total harmonic distortion (THD) of unit. current and voltage. NOTE: The front display module will display voltage and current phases as A/B/C instead of 1/2/3. 71 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 63: Micrologic 5/6 Trip Units Integrated Power Meter Functions Type Display Trip Unit LCD A Front Display Module E Main menu Quick view Metering Alarms Services ESC OK Display of Protection Settings Pick-ups (A) and delays All settings can be displayed Ir, tr, Isd, tsd, Ii, Ig, tg X X X Phase and neutral IA, IB, IC, IN X X X X Average of phases Iavg = (IA + IB + IC) / 3 X X — X X X X X Measurements Instantaneous rms measurements Currents (A) Voltage (V) Frequency (Hz) Power Highest current of the 3 phases and neutral Imax of IA, IB, IC, IN Ground fault (Micrologic 6 trip unit) % Ig (pick-up setting) X X X X Current unbalance between phases % Iavg — X — X Phase-to-phase VAB, VBC, VCA — X X X Phase-to-neutral UAN, UBN, UCN — X X X Average of phase-to-phase voltages Vavg = (VAB + VAC + VBC) / 3 — X — X Average of phase-to-neutral voltages Uavg = (UAN + UBN + UCN) / 3 — X — X Ph-Ph and Ph-N voltage unbalance % Vavg and% Uavg — X — X Phase sequence 1-2-3, 1-3-2 — X X X Power System f — X X X Active (kW) P, total/per phase — X X X Reactive (kVAR) Q, total/per phase — X X X Apparent (kVA) S, total/per phase — X X X Power factor and cos ij (fundamental) PF and cos ij, total and per phase — X — X Associated with instantaneous rms measurements Reset with Micrologic trip unit or front display module X X — X Active (kWh), reactive (kVAR), apparent (kVA) Total since last reset — X X X Present value on the selected window — X — X Maximum demand since last reset — X — X Present value on the selected window — X — X Maximum demand since last reset — X — X Adjustable from 5 to 60 minutes in 1 minute steps — X — 2 Of voltage with respect to rms value THDU, THDV of the Ph-Ph and Ph-N voltage — X — X Of current with respect to rms value THDI of the phase current — X — X Maximum, minimum (MAX/MIN) Energy metering Energy Absolute or signed mode1 Demand and maximum demand values Demand current (A) Phases and neutral Demand power Active (kWh), reactive (kVAR), apparent (kVA) Calculation window Power quality Total harmonic distortion THD (%) 1 Absolute mode: E absolute = E out + E in; Signed mode: E signed = E out - E in. 2 Available through the communication network only. 72 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Additional technical characteristics Measurement accuracy of the entire measurement system, including the sensors: • • • • Current: +/- 1% Voltage: +/- 0.5% Power and energy: +/- 2% Frequency: +/- 0.1%. Operating-Assistance Functions Characteristics Micrologic Trip Unit Alarms with Time-Stamping Alarm Types The user can assign an alarm to all Micrologic A or E trip unit measurements or events: • up to 12 alarms can be used together: — two alarms are predefined and activated automatically: Micrologic 5 trip unit: overload (Ir) Micrologic 6 trip unit: overload (Ir) and ground fault (Ig) — thresholds, priorities and time delays can be set for ten other alarms. • the same measurement can be used for different alarms to precisely monitor certain values, e.g. the frequency or the voltage • • alarms can also be assigned to various states: phase lead/lag, four quadrants, • alarm time-stamping. phase sequence selection of display priorities, with screen displaying a window showing high priority alarm Alarm Settings Alarms cannot be set using the keypad or the front display module. They are set through the communication network with the PC. Set-up includes the threshold, priority, activation delay before display and deactivation delay. It is also possible to reprogram the standard assignment for the two SDx relay outputs to user-selected alarms. Alarm Reading Remote alarm indicators • • reading on the front display module or on a PC through the communication network • Micrologic trip unit built-in LCD display. system remote indicators using SDx relay with two output contacts for alarms. Histories and Event Tables Micrologic A and E trip unit have histories and event tables that are always active. Three types of time-stamped histories • • • Tripping due to overruns of Ir, Isd, Ii, Ig: last 17 trips Alarms: last 10 alarms Operating events: last 10 events Each history record is stored with: • • • indicators in clear text in a number of user-selectable languages time-stamping: date and time of event status: pick-up / drop-out 73 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Two types of time-stamped event tables • • Protection settings Minimums / maximums Display of alarms and tables The time-stamped history and event tables may be displayed on a PC through the communication network. Embedded memory Micrologic A and E trip units have a non-volatile memory that saves all data on alarms, histories, event tables, counters and maintenance indicators even if power is lost. Maintenance Indicators Micrologic A and E trip units have indicators for, among others, the number of operating cycles, contact wear and operating times (operating hours counter) of the PowerPact H-, J-, and L-frame circuit breakers. It is possible to assign an alarm to the operating cycle counter to plan maintenance. The various indicators can be used together with the trip histories to analyze the level of stresses the device has been subjected to. The information provided by the indicators cannot be displayed on the Micrologic trip unit LCD. It is displayed on the PC through the communication network. Management of Installed Devices Each circuit breaker equipped with a Micrologic 5 or 6 trip unit can be identified using the communication network: • • • • serial number firmware version hardware version device name assigned by the user. This information together with that previously described provides a clear view of the state of the installed devices. NOTE: Please refer to page 77 for more details on display formats. 74 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Table 64: Micrologic 5/6 Trip Units Operating Assistance Functions Type Display Trip Unit LCD A Front Display Module E Main menu Quick view Metering Alarms Services ESC OK Operating Assistance Personalized Alarms Up to 10 alarms assigned to all A and E measurements X X — 1 Phase lead/lag, four quadrants, phase sequence, display priority selection — X — 1 Display Alarms and tripping X X — 1 Remote Indicators Activation of two dedicated contacts on SDx module X X — 1 Ir, Isd, Ii (Micrologic 5, 6 Trip Unit) X X — 1 Ig (Micrologic 6 Trip Unit) X X — 1 X X — 1 Modification of protection setting by rotary switch — X — 1 Opening of keypad lock — X — 1 Test using keypad — X — 1 Test using external tool — X — 1 Time setting (date and time) — X — 1 Reset for maximum, minimum and energy meter X X X X Date and time, text, status X X — 1 Settings Time-Stamped Histories Trips (last 17) Cause of tripping (time-stamping with ms) Alarms (last 10) Operating events (last 10) Event types Time Stamping Presentation Time-Stamped Event Tables Protection settings Setting modified (value displayed) Ir X X — 1 Time-stamping Date and time of modification X X — 1 Previous value Value before modification X X — 1 X X — 1 X X — 1 X X — 1 X X X — 1 X X X X — 1 X Values monitored Min/Max tr Isd tsd IA IB IC IN IA IB IC IN Ii Ig Ii Time-stamping Date and time of min/max record Previous value Min/max value tg Maintenance Indicators Mechanical cycles2 Assignable to an alarm Electrical cycles2 Assignable to an alarm Trips One per type of trip Alarms One for each type of alarm Hours Total operating time (hours) Indicator Contact wear % Load profile Hours at different load levels % of hours in four current ranges: 0–49% In, 50–79% In, 80–89% In and 90% In Counter 1 Available through the communication network only. 2 The BSCM (page 82) is required for these functions. 75 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Units Additional technical characteristics: • Contact wear Each time PowerPact H-, J-, and L-frame circuit breakers open, the Micrologic 5 / 6 trip unit measures the interrupted current and increments the contact-wear indicator as a function of the interrupted current, according to test results stored in memory. Breaking under normal load conditions results in a very slight increment. The indicator value may be read on the front display module. It provides an estimation of contact wear calculated on the basis of the cumulative forces affecting the circuit breaker. When the indicator reaches 80%, it is advised to replace the circuit breaker to ensure the availability of the protected equipment. • Circuit breaker load profile Micrologic 5 / 6 trip units calculate the load profile of the circuit breaker protecting a load circuit. The profile indicates the percentage of the total operating time at four current levels (% of In): — 0 to 49% In — 50 to 79% In — 80 to 89% In — 90% In. — This information can be used to optimize use of the protected devices or to plan ahead for expansion. Motor Circuit Protectors (AC Only) See Section 5 for information about PowerPact H-, J- and L-frame electronic motor circuit protectors (MCP) with trip units: • • Micrologic 1.3 M Micrologic 2 M 76 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Section 7—Accessories for Micrologic™ Trip Units Display Options Front Display Module Functions (FDM121) (Micrologic 5 / 6 A or E Trip Units Only) The front display module (FDM121) can be integrated in the PowerPact™ H-, J-, and L-frame circuit breaker system. It uses the sensors and processing capacity of the Micrologic trip unit to display measurements, demand, power quality and maximum/minimum values along with alarms, histories, and maintenance indicators. It is easy to use and requires no special software or settings and is immediately operational when connected to the PowerPact H-, J-, and L-frame circuit breakers by a simple cable. The FDM121 is a large display, but requires very little depth. The anti-glare graphic display screen is backlit for easy reading even under poor ambient lighting and at sharp angles. Table 65: Main menu Quick view Metering Alarms Services ESC Characteristics Screen OK FDM121 Display Alarm LED Operating temperature Size 96 x 96 x 30 mm Installation Requires 10 mm behind the door (or 20 mm when the 24 Vdc power supply connector is used). Backlighting White Viewing Angle Vertical ±60°, horizontal ±30° Resolution High: excellent reading of graphic symbols. Flashing orange Alarm pick-up Steady orange after operator reset Alarm condition persists. 14°F to 131°F (-10 °C to +55 °C). Certifications UL, CSA, CE 24 Vdc power supply Tolerances 24 V -20% +10% (19.2 V to 26.4 V) When the FDM121 is connected to the communication network, the 24 Vdc is supplied by the communication network wiring. Power Requirements 40 mA, 24 Vdc Mounting Standard door cut-out 92 x 92 mm. To avoid a cut-out in the door, a surface-mount accessory is Attached using clips. available for surface mounting by drilling two 22 mm diameter holes. Degree of protection NEMA12 / IP54 in front. NEMA12 / IP54 is maintained after mounting by using the supplied gasket during installation. Surface Mount Accessory Mounting The FDM121 is easily installed in equipment. • • Standard door cut-out 3.62 x 3.62 in. (92 x 92 mm). Attached using clips. To avoid a cut-out in the door, an accessory is available for surface mounting by drilling only two 0.87 in. (22 mm) diameter holes. The FDM121 degree of protection is NEMA12 / IP54 in front. NEMA12 / IP54 is maintained after mounting by using the supplied gasket during installation. 77 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Display of Micrologic Trip Unit Measurements and Alarms The FDM121 is intended to display Micrologic 5 / 6 trip unit measurements, alarms and operating information. It cannot be used to modify the protection settings. Measurements may be easily accessed through a menu. Orange LED Main menu Quick view Metering Alarms Services ESC All user-defined alarms are automatically displayed. The display mode depends on the priority level selected during alarm set-up: • high priority: a pop-up window displays the time-stamped description of the alarm and the orange LED flashes • • medium priority: the orange Alarm LED goes steady on l low priority: no display on the screen. All faults resulting in a trip automatically produce a high-priority alarm, without any special settings required. In all cases, the alarm history is updated. OK If power to the FDM121 fails, all information is stored in the Micrologic trip unit non-volatile memory. The data can be consulted using the communication network when power is restored. Status Indications and Remote Control When the circuit breaker is equipped with the BSCM module (page 82), the FDM121 display can also be used to view circuit breaker status conditions: • • • Auxiliary switch (OF): ON/OFF Alarm switch (SD): trip indication Overcurrent trip switch (SDE): fault-trip indication (overload, short-circuit, ground fault) Electrical Connection The FDM121 is equipped with: • a 24 Vdc terminal block: — plug-in type with 2 wire inputs per point for easy daisy-chaining — power supply range of 24 V -20% (19.2 V) to 24 V +10% (26.4 V) • two RJ45 jacks. The Micrologic trip unit connects to the internal communication network terminal block on the PowerPact H-, J-, and L-frame circuit breakers using the pre-wired NSX cord. Connection to one of the RJ45 connectors on the FDM121 automatically establishes communication between the Micrologic trip unit and the FDM121 and supplies power to the Micrologic trip unit measurement functions. When the second connector is not used, it must be fitted with a line terminator TRV00880. Navigation Five buttons are used for intuitive and fast navigation. The “Context” button may be used to select the type of display (digital [text], bargraph, analog). Main menu Quick view Metering Alarms Services ESC The user can select the display language (Chinese, English, French, German, Italian, Portuguese, Spanish, etc.) Other languages can be downloaded. Screens OK Main menu A B C D E When powered up, the FDM121 screen automatically displays the ON/OFF status of the device. When not in use, the screen is not backlit. Backlighting can be activated by pressing one of the buttons. It goes off after three minutes. 78 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Quick view Provides access to five screens that display a summary of essential operating information (I, U, f, P, E, THD, circuit breaker On / Off). Metering Used to display the measurement data (I, U-V, f, P, Q, S, E, THD, PF) with the corresponding min/max values. Alarms Displays active alarms and the alarm history. Services Provides access to the operation counters, energy and maximum reset function, maintenance indicators, identification of modules connected to the internal bus and FDM121 internal settings (language, contrast, etc.) Fast access to essential information: • “Quick view” provides access to five screens that display a summary of essential operating information (I, V, f, P, E, THD, circuit breaker On / Off). Access to detailed information • “Metering” can be used to display the measurement data (I, U-V, f, P, Q, S, E, THD, PF) with the corresponding min/max values. • • Alarms displays active alarms and the alarm history Services provides access to the operation counters, energy and maximum reset function, maintenance indicators, identification of modules connected to the internal bus and FDM121 internal settings (language, contrast, etc.) 1/10 V L-L Main menu Quick view Metering Alarms Services Service VAB 406 V VBC 415 V VCA 409 V ESC ESC Quick View Services Reset Set-up Maintenance Product ID Language Metering Sub-Menu OK Services Catalog Numbers Table 66: Front Display Module Catalog Numbers Description Catalog No. FDM121 STRV00121 FDM121 Mounting Accessory TRV00128 79 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Circuit Breaker Communication Network Options All PowerPact H-, J-, and L-frame circuit breakers devices can be equipped with the communication function using a pre-wired connection system and a Modbus™ communication interface module. The interface module can be connected directly or through the front display module (FDM121). The PowerPact H-, J-, and L-frame circuit breakers can be integrated in a Modbus communication network. Four functional levels can be used separately or combined to adapt to all supervision requirements. Level Function Communication of status indications Compatible with PowerPact H-, J- and L-frame circuit breakers and automatic switches. Use the BSCM module to access the following information: • • • ON/OFF position trip indication fault-trip indication Available on all circuit breakers and automatic switches with communicating motor operators, the remote control can be used to: Communication of commands • • • open closed reset This level provides access to: Communication of measurements with Micrologic 5 / 6 A or E trip unit • • • • • instantaneous and demand values maximums/minimums energy metering demand current and power power quality This level also provides access to: Communication of operating assistance with Micrologic 5 / 6 A or E trip unit • • • protection and alarm settings time-stamped histories and event tables maintenance indicators Modbus 24 Vdc PowerPact H-, J-, or L-frame circuit breaker is connected to the Modbus communication interface module (IFM) or front display module (FDM121) through the internal terminal block for the NSX cord. 10 The front display module is connected to the Modbus communication interface module by a communication cable with RJ45 connectors on both ends. 10 1. Modbus network 2. Modbus communication interface module 3. NSX cord 4. Internal terminal block for communication using the NSX cord 5. BSCM module 6. Prefabricated wiring 7. Micrologic trip unit 8. FDM121 display 9. RJ45 cable 10. Line terminator (for unused connectors, if applicable) 80 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Modbus Communication Interface Module (IFM) Functions 1 2 1. 2. 3. 4. 5. 6. 7. 3 4 5 6 Five-point Modbus and 24 Vdc connector Two Modbus address rotary switches (1 to 99) Modbus traffic LED Lock-out to disable writing to the trip unit Test LED Test button Two connectors for RJ45 cable This module, required for connection to the network, contains the Modbus address (1 to 99) declared by the user using the two rotary switches in front. It automatically adapts (baud rate, parity) to the Modbus network in which it is installed. It is equipped with a lock-out switch to enable or disable operations involving writing to Micrologic trip unit, (such as reset, counter reset, setting modifications, device opening and closing commands). There is a built-in test function to check the connections of the Modbus communication interface module with the Micrologic trip unit and front display module. Mounting The module is mounted on a DIN rail. A number of modules may be clipped one next to the other. For this, a stacking accessory (shown below) is available for fast clip-connection of both the Modbus link and the 24 Vdc supply. Stacking Connector The Modbus communication interface module supplies 24 Vdc to the corresponding Micrologic trip unit, front display module, and BSCM module. Module power requirements is 60 mA / 24 Vdc. Catalog Numbers Table 67: IFM Catalog Numbers Description Catalog No. Modbus Communication Interface Module (IFM) STRV00210 Stacking Connectors for IFM (10) TRV00217 Isolated Modus Repeater Module Since Modbus interface modules (part number STRV00210) are not isolated, an isolated Modbus Repeater Module needs to be inserted between the Modbus network inside the equipment and the Modbus network outside the equipment. Table 68: Catalog Number Description Catalog No. Isolated Modbus Repeater Module STRV00211 81 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units NSX Cord Cable Length Micrologic trip units are connected to the Modbus communication interface module (IFM) or front display module through the internal terminal block for the NSX cord equipped with an RJ45 connector. The NSX cord is available in two cable lengths: • • 4.27 ft. (1.3 m) 9.84 ft. (3 m) Lengths up to 32.8 ft. (10 m) are possible using extensions. NSX Cord, V 480 V Cable Length • • • For voltage V 480 V, available in 3 prefabricated lengths: 0.35 m, 1.3 m and 3 m. For voltages V > 480 V, a special 1.3 m cable with an insulation accessory is required. A set of cables with RJ45 connectors is available to adapt to different distances between devices. Table 69: NSX Cord, V > 480 V NSX Cord Catalog Numbers Description Catalog No. NSX Cord 4.27 ft. (1.3 m), V 480 V S434201 NSX Cord 9.84 ft. (3 m), V 480 V S434202 NSX Cord 4.27 ft. (1.3 m), V > 480 V S434204 NSX Cord 9.84 ft. (3 m), V > 480 V S434303 Isolation Module for NSX Cord with V > 480 V Breaker Status and Control Module (BSCM) Functions The optional BSCM Breaker Status & Control Module is used to acquire device status indications and control the communicating remote-control function. It includes a memory used to manage the maintenance indicators. Status indications Indication of device status: Auxiliary switch (OF), alarm switch (SD), and overcurrent trip switch (SDE). Maintenance indicators The BSCM manages the following indicators: • • • mechanical operation counter electrical operation counter history of status indications. It is possible to assign an alarm to the operation counters. Controls The BSCM can be used to carry out communicating remote control operations using the communicating motor operator (open, close and reset) in different modes (manual, auto). Mounting The BSCM can be installed on all PowerPact H-, J-, and L-frame circuit breakers and automatic switches with Micrologic trip units. It simply clips into the auxiliary contact slots. It occupies the slots of one auxiliary switch (OF) and one overcurrent trip switch (SDE). The BSCM is supplied with 24 Vdc power automatically through the NSX cord when the communication network is installed. 82 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Catalog Numbers Table 70: BSCM Catalog Numbers Description Catalog No. Replacement BSCM S434205 BSCM with NSX Cord 1.3 m, V 480 V S434201BS BSCM with NSX Cord 3 m, V 480 V S434202BS BSCM with NSX Cord 1.3 m, V > 480 V S434204BS BSCM with NSX Cord 3 m, V > 480 V S434303BS 24 Vdc Power-Supply Terminal Block The Micrologic 5/6 trip unit display is operational when current is flowing through the circuit breaker. To power the Micrologic 5/6 trip unit when the trip unit is not connected to an FDM121 or to the communication network, a 24 Vdc power-supply terminal block can be installed only on Micrologic 5/6 trip units. When used, it excludes connection of an NSX cord. Table 71: 24 Vdc Terminal Block 24 Vdc Catalog Number Description Catalog No. 24 Vdc Terminal Block Unit Mount S434210 External 24 Vdc Power-Supply Module An external 24 Vdc power supply is required for installation in a communication network, whatever the type of trip unit. On installations without a communication network, the power supply is available as an option for Micrologic 5/6 trip units in order to: • • modify settings when the circuit breaker is open • maintain the display of the cause of tripping and interrupted current. display measurements when the current flowing through the circuit breaker is low (15 to 50 A depending on the rating) A single external 24 Vdc supply may be used for the entire network, depending on the number of devices in the communication network. The required characteristics are: External 24 Vdc Power-Supply Module • • output voltage: 24 Vdc ± 5% ripple: ± 1% Table 72: Available External Power-Supply Modules (1 A) Available External Power-Supply Modules Vdc (±5%) Input Voltage 685823 685824 110–130 Vac (+10%, -15%) Cat. No. 48–60 100–125 Power supply Output Power 24–30 5 VA/5W 685825 685826 200–240 685827 380–415 685829 To determine the required output current of the 24 Vdc power supply, it is necessary to sum up the currents consumed by the different loads supplied. 83 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units L Table 73: Power Requirements Module Typical Consumption 24 Vdc @ 68°F (20°C) Maximum Consumption 19.2 Vdc @ 140°F (60°C) Micrologic 5/6 trip units 30 mA 55 mA BSCM 9 mA 15 mA FDM121 21 mA 30 mA IFM 21 mA 30 mA Isolated Modbus Repeater Module 15 mA 19 mA For installation recommendations, see page page 136. Battery Module The battery module is a back-up supply for the external power-supply module. The input/output voltages are 24 Vdc and it can supply power for approximately three hours (100 mA). Battery Module Table 74: Battery Module Description Catalog No. Battery Module 685831 Pocket Tester The pocket tester connects to the Micrologic trip unit test connector. It powers up the Micrologic trip unit and the Ready LED. It supplies the screen, allows settings to be made using the keypad, and provides thermal imaging inhibit functions. Pocket Tester Table 75: Pocket Tester Description Catalog No. Pocket Tester S434206 The pocket tester runs off of two Alkaline AA batteries. 84 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units UST Test Adapter (UTA) Tester for Test and Maintenance The UTA Tester includes: • • • • • • UTA Tester Module configuration and maintenance module power supply (110–220 Vac / 50-60 Hz 24 Vdc - 1 A) special Micrologic cable for connection to the trip-unit test connector standard USB cable standard RJ45 cable user manual Table 76: UTA Tester Catalog Numbers Description Catalog No. UTA Tester (complete) STRV00910 Spare 110-240 V power supply TRV00915 Spare Micrologic cable TRV00917 Spare UTA Tester Module STRV00911 Bluetooth/Modbus Option for UTA Tester TCSWAAC13FB Included in the UTA Tester, the UTA Tester module tests Micrologic trip unit operation and provides access to all parameters and settings. It connects to the Micrologic trip unit test connector and can operate in two modes. • Stand-alone mode to: — supply the Micrologic trip unit with power and check operation using the Ready LED — Provides ground-fault inhibit and thermal memory inhibit • PC mode, connected to a PC with a USB or Bluetooth link. This mode provides access to protection settings, alarm settings and readings of all indicators. Using the associated RSU software utility, it is possible to store, in a dedicated file for each device, all the data that can transferred to another device. This mode also offers operating-test functions: — check on trip time delay (trip curve) — check on non-tripping time (coordination) — check on ZSI (Zone Selective Interlocking) function — alarm simulation — display of setting curves — display of currents — printing of test reports — optional Bluetooth link (to PC). 85 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units 30 Display Test connector USB or Bluetooth Link 110/240 V Universal Logic Plug System The Universal Logic Plug (ULP) system allows the PowerPact H-, J- and L-frame circuit breakers to become metering and supervision tools to assist for energy efficiency. For easy connection of the different modules, the prefabricated cables are identified by a ULP symbol. The connection points on compatible modules are marked in the same manner. ULP Symbol Table 77: ULP Accessories Catalog Numbers Description Qty Catalog No. RJ45 connectors, female/female 10 TRV00870 ULP Line termination 10 TRV00880 RJ45/RJ45 male cord L= 0.3 m 10 TRV00803 RJ45/RJ45 male cord L= 0.6 m 10 TRV00806 RJ45/RJ45 male cord L = 1 m 5 TRV00810 RJ45/RJ45 male cord L = 2 m 5 TRV00820 RJ45/RJ45 male cord L = 3 m 5 TRV00830 RJ45/RJ45 male cord L = 5 m 1 TRV00850 Modbus Line Terminations 2 VW3A8306DRC For more information about the ULP System, see page 136 or bulletin 48940-329-01, ULP (Universal Logic Plug) Connection System—User Guide. 86 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Circuit Breaker Communication Networks and Software Modbus™ Communication Network Modbus is the most widely used communication protocol in industrial networks. It operates in masterslave mode. The devices (slaves) communicate one after the other with a gateway (master). Masterpact™ and PowerPact™ circuit breakers with Micrologic trip units, PowerLogic™ and Sepam™ products all operate with this protocol. A Modbus network is generally implemented on an LV or MV system. Micrologic trip units use the Modbus communication protocol, compatible with ION-Enterprise PowerLogic supervision systems. Depending on the data monitored and the desired refresh rate, a Modbus network connected to a gateway can serve 4 to 16 devices. For larger installations, a number of Modbus networks can be connected to an Ethernet® network (TCP/IP/Modbus protocol) through their gateways. The downloadable RSUsoftware application facilitates implementation of communication network functions. Automatic notification Firewall Nomad mode Internet Site Intranet Ethernet (TCP/IP/Modbus) Consultation RSU RCU EGX400 MPS100 Consultation RSU RCU Modbus Modbus IFM Module Io ) 5 6 8 10 1 .5 Is d ( Masterpact >30 1 Ir (4x 3 2 x Ir ) A >30 .9 4 .9 5 .9 6 .9 7 .9 3 >30 .9 8 .9 2 .9 1 Ir (4x Io ) 5 3 6 2 .5 8 2 10 1 .5 Is d ( x Ir ) A >30 0 >11 % Ir .9 4 .9 5 .9 6 .9 7 .9 3 5 .2 E 0 >11 % Ir .9 8 .9 2 .9 1 Ir (4x Io ) 5 3 6 2 .5 8 2 10 1 .5 Is d ( x Ir ) M icor lo g ic .9 5 .9 6 .9 7 .9 8 .9 2 .9 5 .2 E .9 4 .9 3 2 .5 M icor lo g ic 0 >11 % Ir M icor lo g ic >30 A >30 5 .2 E FDM121 Sepam PowerPact PowerLogic Power Meter 87 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Supervision Software Schneider Electric™ electrical installation supervision, management and expert system software integrates PowerPact H-, J-, and L-frame electronic circuit breakers identification modules. Types of Software Micrologic trip unit communication network functions are designed to interface with software dedicated to electrical installations: • • • • • installation supervision electrical installation supervision power system management: electrical engineering expert systems process control SCADA (Supervisory Control & Data Acquisition), EMS (Enterprise Management System) or BMS (Building Management System) type software. Remote Setting Utility (RSU) The downloadable Micrologic Trip Unit Utility, RSU, facilitates the implementation of communication network functions. • The RSU is available to assist in starting up a communicating installation. The software can be downloaded from the Schneider Electric internet site. • The “Live update” function enables immediate updating to obtain the most recent upgrades. These easy-to-use utilities include starting assistance and online help. They are compatible with Microsoft Windows 2000, XP, Vista and Windows 7. RSU mini-supervision screen for current measurements. 88 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units The RSU can be used to set the protection functions and alarms for each Masterpact™ and PowerPact device. After connection to the network and entry of the circuit-breaker Modbus address, the software automatically detects the type of trip unit installed. There are two possible operating modes. For each selected circuit breaker, the user can do the following. Operating Mode Operation Description Off-Line with the Software Disconnected from the Communication Network Determine the protection settings The settings are carried out on a screen that shows the front of the trip unit. The Micrologic trip unit setting rotary switches, keypad and screen are simulated for easy use of all Micrologic trip unit setting functions. Save and duplicate the protection settings Each configuration created can be saved for subsequent device programming. It can also be duplicated and used as the basis for programming another circuit breaker. Display the current settings The software displays the trip unit and provides access to all settings. The software displays the trip unit and provides access to all settings. View the corresponding protection curves A graphic curve module in the software displays the protection curve corresponding to the settings. Display the current settings Modify settings in a secure manner There are different levels of security: — password: by default, it is the same for all devices, but can be differentiated for each device — locking of the Modbus communication interface module which must be unlocked before the corresponding device can be set remotely — maximum settings limited by the positions of the two rotary switches on the trip unit. These rotary switches, set by the user, determine the maximum settings that can be made using the communication network. On-Line with the Software Connected to the Network Settings are modified by: — either direct, on-line setting of the protection settings on the screen — or by loading the settings prepared in off-line mode. This is possible only if the positions of the rotary switches allow the new settings. All manual settings made subsequently on the device have priority. Up to 12 alarms can be linked to measurements or events. Program alarms two alarms are predefined and activated automatically: — Micrologic 5 trip unit: overload (Ir) — Micrologic 6 trip unit: overload (Ir) and ground fault (Ig) thresholds, priorities and time delays can be set for 10 other alarms. They may be selected from a list of 91 alarms Set the outputs of the SDx relays This is required when the user wants to change the standard configuration and assign different signals to the 2 outputs of the SDx relay. To download the RSU software (LV4ST100): • • go to www.schneider-electric.com and do a search for LV4ST100. Click on LV4ST100, then click Software/Firmware under Downloads menu, then download. Gateway The gateway has two functions: • access to the company intranet (Ethernet) by converting Modbus frames to the TCP/IP/Modbus protocol • optional web page server for the information from the devices. Examples include EGX300 and EGX100. 89 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Integration of PowerPact H-, J-, and L-frame Circuit Breakers Micrologic trip unit communication network functions are designed to interface with software dedicated to electrical installations. PowerPact H-, J-, and L-frame circuit breakers are integrated using Modbus communication interface modules connected through FDM121 front display modules or NSX cords. For easy connection of the different modules, the prefabricated cables are identified by ULP (Universal Logic Plug) symbols. The connection points on compatible modules are marked in the same manner. Schneider Electric™ Solutions Electrical Equipment Supervision using Gateways such as the EGX300 Web Servers • A simple solution for customers who want to consult the main electrical parameters of installed devices without dedicated software. • Up to 16 devices are connected using Modbus communication interface modules to an MPS100 or EGX300 Ethernet gateway integrating the functions of a web page server. The embedded Web pages can be easily configured with just a few mouse clicks. The information they provide is updated in real time. • The Web pages can be consulted using a standard Web browser on a PC connected through Ethernet to the company Intranet or remotely using a modem. Automatic notification of alarms and threshold overruns is possible using e-mail or SMS (Short Message Service). SMS Electrical Engineering Expert System Software PowerLogic™ SMS is a family of web-enabled software products for high-end power-monitoring applications. It is designed for large power systems. SMS products offer detailed analysis of electrical events, long-duration data logging and extensive, economical report-building capabilities (such as power usage monitoring and tariff management). A wide variety of screens can be displayed in real time, including more than 50 tables, analogue meters, bargraphs, alarms logs with links to display waveforms and predefined reports on energy quality and service costs. 90 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units Electrical Installation Supervision using ION-Enterprise Software • PowerLogic™ ION-Enterprise software is ideally suited to the supervision needs of small system applications, monitoring up to 32 devices. • Installed on a PC under Windows, it represents a cost-effective and easy-to-implement powermonitoring solution that offers: — automatic detection of compatible devices — real-time monitoring of data including power requirements — a report generator with a number of pre-defined reports that can be exported to — Excel — cost allocation — time-stamped data-logging possibilities — Modbus serial and Modbus TCP/IP compatible communication. Other Software PowerPact H-, J-, and L-frame devices can forward their measurement and operating information to special software integrating the electrical installation and other technical facilities: • • SCADA process control software: Vijeo CITECT BMS Building Management System software: Vista. For more information, contact your local field office. 91 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units External Neutral Current Transformer (ENCT) The external neutral current transformer is a sensor required for a three-pole circuit breaker in a system with a distributed neutral to measure the neutral current in order to: • • protect the neutral conductor protect against ground faults. This current transformer can be connected to Micrologic 5 / 6 trip units. The transformer rating must be compatible with that of the circuit breaker. Table 78: External neutral current transformer Current Transformers Circuit Breaker H-Frame Rating Catalog No. 60–100 A S429521 150 A S430562 J-Frame 250 A S430563 L-Frame 400–600 A S432575 For installation recommendations, see page 135. External Neutral Voltage Tap (ENVT) The external neutral voltage tap is required for Micrologic E power metering with a three-pole circuit breaker in a system with a distributed neutral. It is used to connect the neutral to the Micrologic trip unit to measure phase-to-neutral (Ph-N) voltages. External Neutral Voltage Tap The ENVT is included with the Micrologic 5/6 electronic trip unit. Zone Selective Interlock (ZSI) Module A ZSI terminal block may be used to interconnect a number of Micrologic trip units to provide zone selective interlocking for short-time (Isd) and ground-fault (Ig) protection, without a time delay. For PowerPact H- and J-frame circuit breakers, the ZSI function is available only in relation to the upstream circuit breaker (ZSI out). For PowerPact L-frame circuit breakers, the ZSI function is available in relation to the upstream circuit breaker (ZSI out) and downstream circuit breakers (ZSI in). Table 79: ZSI Catalog Number Description Catalog No. ZSI Module S434212 92 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories for Micrologic™ Trip Units I-Line™ Wiring Harness Accessories installed in I-Line circuit breakers require the use of optional wiring harnesses (not provided). The wiring harness allows the accessory wiring to exit the circuit breaker through wiring channels in the side of the circuit breakers. Wire harnesses may also be used for unit-mount applications. L-Frame 06164779 H, J-Frame Table 80: Wiring Harness Catalog Numbers Description Catalog No. Auxiliary Switch (OF) I-Line Wire Harness S434500 Alarm Switch (SD)/Overcurrent Trip Switch (SDE) I-Line Wire Harness S434501 SDx/SDTAM I-Line Wire Harness S434502 Undervoltage Trip (MN) I-Line Wire Harness S434503 Shunt Trip (MX) I-Line Wire Harness S434504 24 Vdc Power Supply Terminal Block I-Line Wire Harness S434505 Motor Operator (MT) I-Line Wire Harness S434506 Communicating Motor Operator (MTc) I-Line Wire Harness S434507 NSX Cord I-Line Wire Harness S434508 ZSI (H/J-Frame, Out Only) I-Line Wire Harness S434300 ZSI (L-Frame, In and Out) I-Line Wire Harness S434301 ENCT I-Line Wire Harness S434302 93 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Section 8—Accessories and Auxiliaries All PowerPact™ H-, J-, and L-frame circuit breakers and automatic switches have slots for the electrical auxiliaries . H- and J-Frame L-Frame • • • 4 indication contacts 5 indication contacts — 2 ON/OFF (auxiliary switches [OF1 and OF2]) — 3 ON/OFF auxiliary switches (OF1, OF2, and OF3) — 1 trip indication (alarm switch [SD]) — 1 trip indication (alarm switch [SD]) — 1 fault-trip indication (overcurrent trip switch [SDE]) — 1 fault-trip indication (overcurrent trip switch [SDE]) • one remote-tripping release one remote-tripping release — either 1 undervoltage trip (MN) — either 1 undervoltage trip (MN) — or 1 shunt trip (MX) — or 1 shunt trip (MX) Circuit breakers equipped with Micrologic™ trip units may be equipped with a fault-trip indication to identify the type of fault by installing • one indication module with two outputs (see page 98) — either an SDx module with Micrologic 3.x / 5.x A or E / 6.x A or E — or an SDTAM module with Micrologic 2.x M. This module occupies the slots of one auxiliary switch (OF) contact and an undervoltage trip (MN)/shunt trip (MX). All these auxiliaries may be installed with a motor operator. Communication Network Communication networks require specific auxiliaries. Communication of status indications: • • 1 BSCM module 1 NSX cord (internal terminal block) for both communication and 24 Vdc supply to the BSCM. Communication of status conditions is compatible with a standard motor operator. Communication of status indications and controls requires, in addition to the previous auxiliaries: • 1 communicating motor operator connected to the BSCM. Communication of measurements is available on Micrologic 5 / 6. The system consists of: • 1 NSX cord (internal terminal block) for both communication and 24 Vdc supply to the Micrologic. Communication of measurements is compatible with a standard or communicating motor operator. Communication of status indications, controls and measurements is available on Micrologic 5 / 6. The system consists of: • • 1 BSCM module • 1 communicating motor operator connected to the BSCM. 1 NSX cord (internal terminal block) for both communication and 24 Vdc supply to the BSCM and the Micrologic Installation of SDx or SDTAM is compatible with communication network. 94 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 81: Type Standard Auxiliary Possibilities Based on Trip Unit Trip Unit Auxiliary Possibilities Motor Operator SD H-Frame Micrologic 3 J-Frame OF1 SD MN / MX OF2 SDE SDE OF2 OF1 MN / MX 3.2 olog ic Micr 4 5 3 0 >3 0A >3 10 >1 r % I 140 125 110 100 .9 4 5 16017 .9 3 200 .9 2 225 .9 250 . 9 5 .9 6 .9 7 Ir ( x 6 2 .5 8 2 .9 8 Ir Is d 10 1 .5 1 Is d ) ( x Ir Io ) ) Io ( A Motor Operator H-Frame Micrologic 5 J-Frame Micrologic 6 OF1 SD MN / MX OF2 SDE Motor Operator or 24 Vdc Supply Terminal Block SDx / SDTAM The SDx or SDTAM uses the OF1 and MN/MX slots. External connection is made via a terminal block in the OF1 slot. The 24 Vdc supply provides for the Micrologic 5 / 6 display when the device is OFF or under low-load conditions. OF1 OF2 OF3 Micrologic 1.3 M Reserved L-Frame MN / Micrologic 3 MX OF1, OF2, OF3 SD SD SDE SDE Reserved MN / MX 3.2 rolo gic Mic 4 5 3 0 >3 0A >3 10 >1 r % I 140 125 110 100 .9 4 5 16017 .9 3 200 .9 2 225 .9 250 .9 5 .9 6 .9 7 Ir ( x .9 8 1 6 2 .5 8 2 Ir Is d 10 1 .5 Is d ) ( x Ir Io ) ) Io ( A Motor Operator L-Frame Micrologic 5 Micrologic 6 OF1 OF2 OF3 Reserved MN / MX Motor Operator Rotary Handle SD SDE 24 Vdc Supply Terminal Block or SDx / SDTAM External connection is made using a terminal block in the reserved slot. The 24 V DC supply provides for the Micrologic 5 / 6 display when the device is OFF or under low-load conditions. 95 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 82: Type Communication Network Auxiliary Possibilities Based on Trip Unit Trip Unit Auxiliary Possibilities Communication of status indications and controls Communicating Motor Operator H-Frame J-Frame Micrologic 3 BSCM NSX Cord Communication of status indications, controls and measurements with or without FDM121 display Communication of measurements with or without FDM121 display Motor Operator H-Frame J-Frame Communicating Motor Operator Micrologic 5 Micrologic 6 NSX Cord or BSCM NSX Cord Communication of status indications and controls Communicating Motor Operator L-Frame NSX Cord Micrologic 1.3 M Micrologic 3 BSCM Communication of status indications, controls and measurements with or without FDM121 display Communication of status indications Communicating Motor Operator Motor Operator L-Frame NSX Cord Micrologic 5 or Micrologic 6 BSCM NSX Cord 96 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Accessory Connections Electrical accessories are fitted with numbered terminal blocks for wires with the following maximum size: 16 AWG (1.5 mm2) for auxiliary switches (OF1 or OF2), and shunt trip (MX) or undervoltage trip (MN) • • 14 AWG (2.5 mm2) for the motor operator Auxiliary switch wiring exits fixed mounted devices through a knock-out in the front cover. NOTE: See page 119 for plug-in and page 121 for drawout options. Auxiliary and Alarm Indication Contacts Auxiliary indication contacts provide remote information of the circuit breaker status and can thus be used for indications, electrical locking, relays, etc. Table 83: Auxiliary and Alarm Indication Contacts Open/Closed—Auxiliary Switches (OF) • Indicates the position of the circuit breaker contacts Trip Indication—Alarm Switch (SD) • Auxiliary Switch (OF)/ Alarm Switch (SD) • Applications Indicates that the circuit breaker has tripped due to an overload, short circuit or ground fault, the operation of a shunt trip or undervoltage trip or the “push-to-trip” button Resets when the circuit breaker is reset Overcurrent Trip Switch (SDE) • • Indicates that the circuit breaker has tripped due to an overload, short circuit or ground fault Resets when the circuit breaker is reset The above switches are also available in low-level versions (with gold flash plating) capable of switching very low loads (e.g., for controlling PLCs or electronic circuits) Rotary Handle Indicator: CAO (early-break) and CAF (early-make) Overcurrent Trip Switch Actuator (SDE) Installation & Connection Fitted in the rotary handle module (see page 106) The auxiliary switch (OF), alarm switch (SD), and overcurrent trip switch (SDE) indication contacts snap into cavities behind the front accessory cover of the circuit breaker. One model serves for all indication functions depending on where it is fitted in the circuit breaker. The overcurrent trip switch (SDE) in a circuit breaker equipped with a thermal-magnetic or Micrologic 1/2/3 trip unit requires the SDE actuator. • • • • • • Standards Table 84: • • The internal accessories comply with requirements of Underwriters Laboratories® Inc. (UL®). UL 489 and Canadian Standard Association C22.2 No. 5-02 Standards. All internal accessories are Listed for field installation per UL file E103955 and Certified under CSA file LR 69561. Auxiliary indicator contacts comply with UL 489, CSA C22.2 No. 5-02 and IEC 60947-5 Standards. “Lowlevel” indicator contacts are not UL Recognized. Electrical Characteristics Characteristic Standard Low-Level1 Supplied as Standard (Form C) 4 4 Maximum Number of Contacts 4 4 Rated Thermal Current 6A 5A Minimum Load 100 mA at 24 V Operational Current AC DC AC DC 24 V 6A 6A 5A 5A 48 V 6A 2.5 A 5A 2.5 A 110 V 6A 0.6 A 5A 0.6 220/240 V 6A — 5A — 250 V — 0.6 A 5A 0.3 A 380/440 V 6A — 5A — 480 V 6A — 5A — 660/690 V 6A — — — 1 1 mA at 4 V If the maximum voltage and current is exceeded, the low-level function of the switch will be lost but the switch will continue to function as a standard switch. 97 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 85: Auxiliary Switch Catalog Numbers Contacts Factory-Installed Suffix 1A/1B Standard AA Field-Installable Kit No. Kit Qty. S29450 1 2 2A/2B Standard AB S29450 1A/1B Low-Level (Gold) AE S29452 1 2A/2B Low-Level (Gold) AF S29452 2 Table 86: Suffix Alarm/Overcurrent Trip Switch Catalog Numbers Switch Kit No. Kit Qty. PowerPact L-Frame PowerPact H/J-Frame with Micrologic 5/6 trip units BC Alarm Switch S29450 1 BH Alarm Switch Low-Level S29452 1 BD Overcurrent Trip Switch Standard S29450 1 BJ Overcurrent Trip Switch Low-Level S29452 1 BE Alarm Switch and Overcurrent Trip Switch, Standard S29450 2 BK Alarm Switch and Overcurrent Trip Switch, Low-Level S29452 2 PowerPact H/J-Frame with Thermal-Magnetic or Micrologic 1/2/3 trip units BC Alarm Switch S29450 1 BH Alarm Switch, Low-Level S29452 1 BD Overcurrent Trip Switch, Standard SDE Actuator S29450 S29451 1 1 BJ Overcurrent Trip Switch, Low-Level SDE Actuator S29452 S29451 1 1 BE Alarm Switch and Overcurrent Trip Switch, Standard SDE Actuators S29450 S29451 2 2 BK Alarm Switch and Overcurrent Trip Switch, Low-Level SDE Actuators S29452 S29451 2 2 98 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries SDx and SDTAM Modules for Micrologic SDx and SDTAM are relay modules with two outputs. They send different signals depending on the type of fault. They may not be used together. SDx Module The SDx module remotely monitors the trip or alarm conditions of PowerPact H-, J-, and L-frame circuit breakers equipped with electronic protection. An SDx relay module installed inside the circuit breaker can be used to remote the overload trip signal. This module receives the signal from the Micrologic electronic trip unit through an optical link and makes it available on the terminal block. The signal is cleared when the circuit breaker is closed. These outputs can be reprogrammed to be assigned to other types of tripping or alarm (see page 98). The SDx module may be used in 400 Hz systems for voltages from 24 to 440 V. The SD2 output, available on all Micrologic trip units, corresponds to the overload-trip indication. SDx module with terminal block. The SD4 output, available on Micrologic 5 / 6, is assigned to: • • overload pre-alarm (Micrologic 5) ground-fault trip indication (Micrologic 6) These two outputs automatically reset when the device is closed (turned ON). For Micrologic 5 / 6, the SD2 and SD4 outputs can be reprogrammed to be assigned to other types of tripping or alarm. It is possible to assign a function output characteristics: • • latching with a time delay. Return to the initial state occurs at the end of the time delay permanent latching. Return to the initial state takes place through the communication function. Static outputs: 24–415 Vac / Vdc; 80 mA max. SDTAM Module The SDTAM module, linked to the contactor controller, opens the contactor when an overload or other motor fault occurs, thus avoiding opening of the circuit breaker. The SDTAM module is specifically for the motor-protection Micrologic trip units 2 M (2.2 M and 2.3 M). Micrologic 2 M The SD4 output opens the contactor 400 ms before normal circuit-breaker opening in the following cases: SDTAM module with terminal block. • • overload (long-time protection for the trip class) phase unbalance or phase loss The SD2 output serves to memorize contactor opening by SDTAM. Output characteristics Output reset can be: • • manual by a pushbutton included in the wiring diagram automatic after an adjustable time delay (1 to 15 minutes) to take into account the motor-cooling time Static outputs: 24–415 Vac / Vdc; 80 mA max. a (+) 24–415 V. 99 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries NSX cord Closed Open Fault Fault Closed Open 102 104 VT 124 WH YE 134 RD 94 92 84 82 12 14 22 24 32 34 B4 HL + - Vac (220/240 V) BSCM Q SD 91 81 11 21 31 Vac CAO1 CAF2 CAF1 GY SDE 101 OF1 WH OF2 121 OF3 RD I 131 0 A1 auto manu Schematic of the communicating motor operator . Table 87: SDx and SDTAM Catalog Numbers Contacts Factory-Installed Suffix Field-Installable Kit No. SDx V S429532 SDTAM (motor trip units only) V S429424 100 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Shunt Trip (MX) and Undervoltage Trip (MN) A voltage release can be used to trip the circuit breaker using a control signal. Table 88: Shunt Trip and Undervoltage Trip Shunt Trip (MX) • • • • Applications Undervoltage Trip (MN) • • • • Installation and • Connection • • • Operation • Table 89: Trips the circuit breaker when the control voltage rises above 70% of its rated voltage Impulse type ≥ 20 ms or maintained control signals AC shunt trips are suitable for ground-fault protection when combined with a Class I ground-fault sensing element Continuous duty rated coil Trips the circuit breaker when the control voltage drops below a tripping threshold Drops out between 35% and 70% of the rated voltage Continuous duty rated coil Circuit breaker closing is possible only if the voltage exceeds 85% of the rated voltage. If an undervoltage condition exists, operation of the closing mechanism of the circuit breaker will not permit the main contacts to touch, even momentarily. This is commonly called “Kiss Free”. Accessories are common to H-, J-, and L-frame circuit breakers and snap into cavities under the front accessory cover of the circuit breaker Each terminal may be connected by one 18–14 AWG (1.0–2.5 mm2) stranded copper wire The circuit breaker must be reset locally after being tripped by shunt trip (MX) or undervoltage trip (MN) Tripping by the shunt trip or undervoltage trip has priority over manual (or motor operator) closing; in the presence of a standing trip order such an action does not result in any closing, even temporarily, of the main contacts Endurance: 50% of the rated mechanical endurance of the circuit breaker Electrical Characteristics Rated Voltage (V) Power Requirements Pickup (shunt trip) Seal-in (undervoltage trip) Clearing Time (ms) Table 90: AC DC 24, 48, 120, 208/277, 380/480, 525, 600 < 10 VA < 5 VA < 50 12, 24, 30, 48, 60, 125, 250 <5W <5W < 50 Shunt Trip and Undervoltage Trip Suffix Codes and Kit Numbers Shunt Trip (MX) Voltage Factory-Installed Suffix 24 Vac 48 Vac 120 Vac 208/277 Vac 380/480 Vac 525/600 Vac 12 Vdc 24 Vdc 30 Vdc 48 Vdc 60 Vdc 125 Vdc 250 Vdc Table 91: SK SL SA SD SH SJ SN SO SU SP SV SR SS Undervoltage Release (MN) Field-Installable Kit No. S29384 S29385 S29386 S29387 S29388 S29389 S29382 S29390 S29391 S29392 S29383 S29393 S29394 Factory-Installed Suffix UK UL UA UD UH UJ UN UO UU UP UV UR US Field-Installable Kit No. S29404 S29405 S29406 S29407 S29408 S29409 S29402 S29410 S29411 S29412 S29403 S29413 S29414 Adjustable and Fixed Time Delay Units for Undervoltage Trip Field-Installable Kit No. Rated Voltage Adjustable Fixed 48 Vac/dc S33680 S29426 100/130 Vac/dc S33681 — 220/250 Vac/dc S33682 S29427 101 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Motor Operator The motor operator remotely operates the circuit breaker featuring easy and sure operation: • All circuit breaker indications and information remain visible and accessible, including trip unit settings and circuit breaker connection • • Suitability for isolation is maintained and padlocking remains possible Double insulation front face 1 0OFF 2 3 discharged 4 OFF 8 7 ON 6 1. Contact position indicator (suitability for isolation) 2. Spring status indicator (charged, discharged) 3. Manual spring-charging handle 4. Keylock device Locking device (off position) using one to three padlocks, diameter 0.2–0.32 in. (5–8 mm), not supplied 5. ON push button 6. OFF push button 7. Manual/auto mode selection switch; the position of the switch can be indicated remotely 8. Operation counter 5 Applications: • • • • Local motor-driven operation, centralized operation, automatic distribution control Normal/standby manual transfer or switching to a replacement source to optimize energy costs Load shedding and reconnection to optimize energy costs Less than five cycle closing time for source synchronization Installation and Connection • All installations are available for H- and J-frame circuit breakers. All installations are available for L-frame circuit breakers except I-Line • • Connections of the motor operator module are to a built-in terminal block behind its front cover Stranded copper wire 14 AWG (2.5 mm2) Automatic Operation The motor operator is connected in series with the overcurrent trip switch (SDE). • • • ON and OFF by two impulse type or continuous control signals Depending on the wiring, resetting can be done locally, remotely or automatically Mandatory manual reset following tripping due to an electrical fault (with overcurrent trip switch) Manual Operation • • • • Transfer to manual mode with possibility of remote mode indication ON and OFF by two push buttons Recharging of stored-energy system by pumping the lever Padlocking in off position 102 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 92: Motor Operator Characteristics Response Time (ms) Operating Frequency Opening < 600 Closing < 80 cycles/minute max. AC (VA) Manual Mode Switch Power Requirements1 DC (W) 1 4 500 Opening Closing 500 Opening 500 Closing 500 For H- and J-frame, the inrush current is 2x operating current for 10 ms. Table 93: Motor Operator and Accessory Suffix Codes and Catalog Numbers Factory-Installed Field-Installable Kit No. Suffix H-Frame J-Frame L-Frame Device1 Control Voltage Communicating Motor Operator 220/240 Vac 50/60 Hz NC S429441 S431549 S432652 48/60 Vac 50/60 Hz ML S29440 S31548 S432639 110/130 Vac 50/60 Hz MA S29433 S31540 S432640 208/277 Vac 60 Hz MD S29434 S31541 S432641 380/415 Vac 50/60 Hz MF — — S432642 440/480 Vac 60 Hz MH S29435 S31542 S432647 24/30 Vdc MO S29436 S31543 S432643 48/60 Vdc MV S29437 S31544 S432644 110/130 Vdc MR S29438 S31545 S432645 250 Vdc MS S29439 S31546 Motor Operator S432646 Lock Mounting Hardware — — — — S32649 Ronis® Lock — — S41940 S41940 S41940 Profalux® Lock — — S42888 S42888 S42888 Mounting Hardware with Ronis Lock — — S429449 S429449 Operations Counter — — Adapter for I-Line Circuit Breaker 1 — — S37420 S37420 — S32648 — For NSX cord (communication suffixes EA, EB, ED, and EE) any motor operator may be selected. For BSCM + NSX cord (communication suffixes EB, EH, EK, and EL) only the communicating motor operator may be selected. 103 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Add-On Ground-Fault Module (GFM) (H- and J-Frame Only) The Micrologic Ground-Fault Module (GFM) is a UL Listed/CSA Certified circuit breaker accessory which protects equipment from damage caused by ground faults. It is an add-on module which, when connected to a PowerPact H- or J-frame thermal-magnetic circuit breaker only, provides ground-fault sensing and ground-fault relay functions. HD/JD ground-fault modules feature: Ground-Fault Module Modulo de falla a tierra Module de défaut de mise à la terre GFM150HD 60A 40A 2 80A 1 20A 52H 4 3 4 100A 4068715 H238 Fault Indicator 100A 600 Vac/V Adjustable ground-fault pickup levels • Fault-powered (through the sensing current transformer) for electronics, shunt trip, and integral test feature. Meets NEC 230.95(C). • A 12 Vdc shunt trip module (Catalog No. S29382) is required in the circuit breaker. This may be field installed or factory installed when the circuit breaker is ordered with an -SN suffix. • UL 1053 – Ground-fault Sensing and Relaying Equipment LISTED Circuit Breaker Accessory Ground-Fault Indicator Push-to-test Delay Band Pick-up Push to reset Requires 120 V 1=min. Pousser pour réinitialiser Class I Ground-fault Protection Indicador de falla a tierra Protección de falla a tierra clase I Oprima para restablecer Protection de défaut de mise à la terre classe I Indicateur de défaut de mise à la terre TM • • • • • ® max. Replace cover after adjusting/Replacer le couvercle avant aprés le réglage/Vuelva a colocar la cubierta después de ajustar Terminal strip wiring terminals must not be dielectric tested. No se deben realizar pruebas dieléctricasa a las terminalses de la tabilla de conexiones. Les bornes de câblage de la barrette de connexion ne doivent pas étre véroflées diélectriquement. DANGER PELIGRO ! DANGERPELIGRO Replace lug cover after HAZARD OF ELECTRICAL SHOCK OR BURN. wiring. PELIGRO DE DESCARGA ELECTRICA O Vuelva a colocar después QUEMADURAS. de realizar el cableado . DANGER DE D’CHARGE ELECTRIQUE OU DE Replacez le couvreBRULURE. cosse après le câblage J-Frame Circuit Breaker with GFM Installed Adjustable ground-fault time delays Integral ground-fault push-to-test feature Ground-fault indicator (mechanical for local, contacts for remote) All GFMs are supplied for I-Line™ mounting as standard, easily convertible to unit mount by removing the I-Line bracket. The GFM system requires the following: • • • • H-frame (15–150 A) or J-frame (150–250 A) molded case circuit breaker Shunt trip for circuit breaker (may be factory-installed or field-installed) Bus bar connection (terminal nut inserts) for OFF end of circuit breaker Optional neutral current transformer, catalog number GFM25CT (must be ordered for 4-wire applications). Table 94: Ground-Fault Module Catalog No. Rating Sensitivity Time Delay (Approximate) GFM150HD 150 A 20, 40, 60, 80, 100 A 0.2, 0.3, 0.4, 0.6 sec GFM250JD 250 A 40, 80, 120, 160, 200 A 0.2, 0.3, 0.4, 0.6 sec 104 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Earth Leakage Module (ELM) (H- and J-Frame Only) The Earth Leakage Module (ELM) is an add-on module which, when connected to a PowerPact H- or J-frame MCCB, provides low-level ground-fault sensing and ground-fault relay functions. Because these ELMs are highly sensitive (30 mA to 3 A), they provide much greater protection than GFMs (20 Amps to 200 Amps sensitivity). The ELMs provide greater protection of control circuits and other sensitive equipment. The associated circuit breaker must have a 48 Vdc shunt trip), which may be field-installed (kit S29392) or factory-installed (suffix –SP) in the H- or J-Frame circuit breaker. The add-on Earth Leakage Module (ELM) features: J-Frame Circuit Breaker with ELM Installed • • Adjustable ground-fault pickup levels as low as 30 mA • • Integral ground fault push-to-test feature • All ELMs are supplied for I-Line mounting and are easily convertible to unit-mount by removing the I-Line mounting feet • Three poles; 240 to 600 Vac maximum: 3-phase, 3-wire (no neutral) and 1-phase, 2-wire applications • Line-power obtained through internal bus to provide power for electronics, shunt trip, and integral test feature • A shunt trip is required in the circuit breaker; it may be field-installed or factory-installed in the PowerPact H and J circuit breakers. • UL 1053 – Ground-fault Sensing and Relaying Equipment Adjustable ground-fault time delays from instantaneous to 500 msec (time delay can be applied to any setting) Ground-fault indicator; pop-up button for local status and contacts for remote indication (to be used only with the tripping option) Table 95: ELM Selection Chart 1 Companion Circuit Breaker Prefix Size Enclosure Space Required I-Line Equipment HD, HG, HJ, HL 15–150 A LA ELM150HD JD, JG, JJ, JL 150–250 A LA ELM250JD 1 Catalog No. Pick-Up Adjustments Ground-Fault Time Delay Adjustments 30 mA 100 mA 300 mA 1A 3A Instantaneous 60 ms 100 ms 500 msec At 250 A, the ELM250JD can be used with standard (80%) rated circuit breakers only. Factory-Installed ELMs The catalog number for circuit breakers with factory-installed ELM should include the special suffixes SP and VL or VM: H D M 3 6 150 SP VL where • • • • • H = H-fame (or J = J-frame) D = D interruption level (or G, J or L) M = Lugs on ON end and terminal nuts on OFF end (required) SP = Factory-installed 48 Vdc shunt trip (S29392, required) VL= Earth Leakage Module (ELM) <150 A (H-frame) or VM = Earth Leakage Module (ELM) <250 A (J-frame) 105 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Rotary Operating Handles Directly Mounted Rotary Operating Handles Installation The directly mounted rotary operating handle replaces the circuit breaker front accessory cover (secured by screws). The direct rotary handle maintains: Operation • • • • • Suitability for isolation Indication of three positions: I (ON), Tripped and O (OFF) Access to the “push-to-trip” button Visibility of, and access to, trip unit settings The circuit breaker may be locked in the OFF position by using one to three padlocks (not supplied) Models • • Standard with black handle VDE type with red handle and yellow bezel for machine tool control push to trip I/ON (Closed) Tripped O/OFF (Open) Accessories transform the standard direct rotary handle for the following situations: Directly Mounted Rotary Operating Handle • Motor control centers (MCCs): – Opening of door prevented when circuit breaker is on – Closing of circuit breaker inhibited when door is open • • Machine tool control; complies with CNOMO E03.81.501N; degree of protection IP54 Early make or early break contacts may be installed into direct mount rotary handle Variations Standards The directly-mounted rotary operating handle is UL Listed under file E103955 and CSA Certified under file LR 69561 Door-Mounted (Extended) Rotary Operating Handle The door-mounted (extended) rotary operating handle is made up of: Installation • • • • A unit that replaces the front accessory cover of the circuit breaker (secured by screws) An assembly (handle and front plate) on the door that is always secured in the same position, whether the circuit breaker is installed vertically or horizontally An adjustable extension shaft The handle mechanism can be used in NEMA 3R and 12 enclosure applications The door mounted operating handle makes it possible to operate circuit breakers installed in enclosure from the front. The door mounted operating handle maintains: Operation Door Mounted Rotary Operating Handle • • • • Suitability for isolation Indication of the three positions OFF (O), ON (I) and tripped Visibility of and access to trip unit settings when the door is open Degree of protection: IP40 as per IEC 529 Defeatable interlock prevents opening of door when circuit breaker is on The circuit breaker may be locked in the off position by using one to three padlocks, padlock shackle diameter 0.19–0.31 in. (5–8 mm); padlocks are not supplied; locking prevents opening of the enclosure door The shaft length is the distance between the back of the circuit breaker and the door: Shaft Length • • • Minimum shaft length is 7.4 in. (185 mm) Maximum shaft length is 24 in. (600 mm) Extended shaft length must be adjusted Models • • Standard with black handle VDE type with red handle and yellow bezel for machine tool control Variations For drawout configurations, the extended rotary handle is also available with a telescopic shaft containing two stable positions Standards The door-mounted rotary operating handle is UL Listed under file E103955 and CSA Certified under file LR 69561 106 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 96: Rotary Operated Handles H- and J-Frame Device Description Standard Handle Black Handle only Factory Installed Suffix Factory Installed Suffix Field Installable Kit No. RD10 S29337 RD10 S32597 One early-break switch RD12 S29337 + S29345 RD12 S32597 + S32605 Two early-make switches RD13 S29337 + S29346 RD13 S32597 + S29346 Handle Only RD20 S29339 RD20 S32599 One early-break switch RD22 S29339 + S29345 RD22 S32599 + S32605 Two early-make switches RD23 S29339 + S29346 RD23 S32599 + S29346 MCC Conversion Accessory — S429341 — S32606 CNOMO Conversion Accessory — S29342 — S32602 RE10 S29338 RE10 S32598 Two early make switches RE13 S29338 + S29345 RE13 S32598 + S32605 Handle Only RE20 S29340 RE20 S32600 RT10 S29343 RT10 S32603 — S429344 — S32604 S41940 Standard Black Handle with Direct Mounted Red handle on yellow bezel Standard black handle Handle Only Door Mounted Standard Black Handle with: Red handle on yellow bezel Telescoping Key lock adapter Accessories Field Installable Kit No. L-Frame Key locks Indication Auxiliary Switch Ronis 1351.500 — S41940 — Profalux KS5 B24 D4Z — S42888 — S42888 2 Ronis keylocks with 1 key — S41950 — S41950 2 Profalux keylocks with 1 key — S42878 — S42878 One early-break switch — S29345 — S32605 Two early-make switches — S29346 — S29346 Class 9421 NEMA Door Mounted Rotary Operating Handles The extended rotary operating handle is made up of: Installation • • • A mounting plate that provides a rotary actuator for a standard toggle circuit breaker Handle assemblies available for NEMA 3, 3R, 4, and 4X Available in standard or short (3 in.) handle assemblies The door mounted operating handle makes it possible to operate circuit breakers installed in enclosure from the front. Operation Provides ON (I) and OFF (O) indication The circuit breaker may be locked in the off position The shaft length is the distance between the back of the circuit breaker and the door: Shaft Length • • • Minimum mounting depth is 5.5 in. (138 mm) Maximum mounting depth is 10.75 in. (273 mm) with standard shaft Maximum mounting depth is 21.3 in. (543 mm) with long shaft H- and J-Frame Class 9421 Door-Mounted Operating Mechanism Description Catalog No. Standard Shaft Kit 9421LJ1 Long Shaft Kit 9421LJ4 107 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 97: H- and J-Frame Component Parts Description Catalog No. Type 1, 3R, 12 9421LH6 NEMA Type 3 and 4, Painted 9421LH46 NEMA Type 3 and 4, Chrome Plated 9421LC46 Operating Mechanism Includes Lockout 9421LJ7 Standard Shaft Support Bracket Not Required 9421LS8 Long Shaft Support Bracket Included 9421LS13 Standard Handle Assembly Table 98: L-Frame NEMA Door-Mounted Rotary Operated Handles Handle Type Poles Painted 6 in. Operating Mechanism Included in Kit Mounting Depth Min–Max Kit Number 9421LS8 and 9421LC46 7-1/4 to 12-1/16 in. (184 to 306 mm) 9421LD1 9421LS13 and 9421LH46 7-1/4 to 22-5/8 in. (184 to 575 mm) 9421LD4 3 Class 9422 Cable Operating Handle Flange-mounted handle cable operating mechanism is for use with Class 9422 Type A handle operators especially designed for tall, deep enclosures where placement flexibility is required. • The cable operator maintains: Suitability for isolation Indication of three positions: O (OFF), I (ON) and tripped Access to push-to-test • • The circuit breaker may be locked in the off position by one to three padlocks Door can be locked closed due to interlocking features of the handle operator • Handle is mounted on flange of enclosure using specified mounting dimensions while circuit breaker and operating mechanism are mounted to inside of enclosure using two screws Cable lengths available in 3-, 5- or 10-foot lengths to accommodate a variety of mounting locations Handles are available in painted NEMA 1, 3, 3R, 4 (sheet steel) and 12 ratings or chrome (NEMA 4, 4X) Applications F Installation • C E 1.00 (25) X Refer to NEC Article 430-10 for minimum dimension X from circuit breaker top mounting hole to wall or barrier to ensure adequate wire bending space. A 4.69 9.12 (119) (232) B D 1.44 (37) 4.25 (108) Table 99: Dimensions: Note: Bend radius in cable must never be less than 6 in. (152 mm). Electrical clearances must be maintained between cable and live electrical parts. in. (mm) Class 9422 Cable Operating Mechanisms and A1 Handles H- and J-Frame Kit Number L-Frame Kit Number 36 in. (914 mm) 9422CSF30 9422CSJ30 Cable Mechanism 60 in (1524 mm) Length 84 in. (2134 m) 9422CSF50 9422CSJ50 Description 9422CSF70 — 9422CSF10 9422CSJ10 A1 painted flange handle — 9422A1 Operating Mechanism Only — 9422RSI 120 in. (3048 mm) 108 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Class 9422 Flange-Mounted Variable-Depth Operating Mechanism Designed for installation in custom built control enclosures where main or branch circuit protective devices are required. • All circuit breaker operating mechanisms are suitable for either right- or left-hand flange mounting, convertible on the job. • • H- and J-frame variable mounting depth range: 5.88–17.75 in. (149–451 mm). H- and J-frame operating mechanism 9422RQ1 does not include handle mechanism. Threaded-rod flange-mounted variable depth operating mechanism Designed for installation in custom-built control enclosures where main or branch circuit protective devices are required. All circuit breaker operating mechanisms are suitable for either right- or left-hand flange mounting, convertible in the field. Table 100: push to trip L-Frame Flange-Mounted Operating Mechanism Description Depth Variable Depth Mechanism Kit Number 9.00–17.75 in. (229–451 mm) 9422RSI Locking Systems Padlocking systems can receive up to three padlocks with diameters of 0.19–0.31 in. (5–8 mm); padlocks not supplied. L-Frame H- and J-Frame push to trip Removable Attachment push to trip Fixed Padlock Attachment Removable Attachment Table 101: Fixed Padlock Attachment Device Locking, Interlocking Options Field-Installed Cat. No. Device Description H- and J-Frame L-Frame Handle Padlocking Device1 Removable (lock OFF only) S29370 S29370 Fixed (lock OFF or ON) S29371 S32631 Fixed (lock OFF only)2 S37422 NJPAF Key Locking Provision and 2 locks keyed alike Ronis — S41950 Profalux — S42878 1 Rotary handles and motor operators have integral padlocking capability. 2 Not available in HD or HG 2P modules. 109 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Manual Mechanical Interlocking Systems Some installations use two power supply sources to counter any temporary loss in the main supply. A mechanical interlocking system is required to safely switch between the two sources. The replacement source can be a generator set or another network. Managing multiple power sources can be controlled manually by mechanical interlocks. The mechanical interlocking system is made up of: • • two H-, J-, or L-frame devices (circuit breakers or switches) controlled manually mechanical interlocking, which prevents handle movement from the OFF position while the other device is in the ON position. Since it is controlled manually by a maintenance technician, switchover time from the normal source to the replacement source can vary. Figure 4: Interlocking Systems H- and J-Frame Interlocking with Toggle Control (S29354) Interlocking with Rotary Handles (S29369) L-Frame ON I ON I ON I ed tripp ON I push to trip push to trip rese t O OFF push O OFF ed tripp push to push to trip trip rese t O OFF push to trip O OFF Interlocking with Rotary Handles (S32621) Interlocking with Toggle Control (S32614) 110 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Interlocking of Circuit Breakers With Toggle Control Two devices can be interlocked using this system. Two identical interlocking systems can be used to interlock three devices installed side by side. Authorized positions: • • one device closed (ON), the others open (OFF) all devices open (OFF) The system is locked using one or two padlocks (shackle diameter 0.19–0.31 in. [5 to 8 mm]). This system can be expanded to more than three devices. There are two interlocking-system models: • • one for PowerPact H- and J-frame circuit breakers one for PowerPact L-frame circuit breakers All toggle-controlled unit-mount or plug-in PowerPact H-, J-, and L-frame circuit breakers and automatic switches of the same frame size can be interlocked. The devices must be either all unitmount or all plug-in versions. Interlocking is not available for I-Line constructions. The toggle interlock system can receive one or two padlocks with diameters of 0.19–0.31 in. (5–8 mm). Both interlocked circuit breakers must be unit-mount or both plug-in. Two sliding interlocking bars can be used to interlock three circuit breakers installed side-by-side, in which case one circuit breaker is in the ON (I) position and the two others in the OFF (O) position. (Kit S29354, not available for 2P HD and HG devices.) Interlocking of Two Devices with Rotary Handles Interlocking involves padlocking the rotary handles on two devices which may be either circuit breakers or automatic switches. Authorized positions: • • one device closed (ON), the other open (OFF) both devices open (OFF). The system is locked using up to three padlocks (shackle diameter 0.19–0.31 in. [5 to 8 mm]). There are two interlocking-system models: • • one for PowerPact H- and J-frame circuit breakers one for PowerPact L-frame circuit breakers All rotary-handle unit-mount or plug-in PowerPact H-, J-, and L-frame circuit breakers and automatic switches of the same frame size can be interlocked. The devices must be either all unit-mount or all plug-in versions. Interlocking is not available for I-Line constructions The rotary handles are padlocked with the devices in the OFF (I) position. The interlock mechanism inhibits the two devices from being closed (ON/I) at the same time, but allows for both devices to be open (OFF/O) simultaneously. (Kit S29369. Not available for 2P HD and HG devices.) Table 102: Interlocking Accessories Kit Number Accessory Means handles1 Interlocking Mechanical for circuit breakers with rotary (UL listed) Mechanical for circuit breakers with toggles1 1 H-, J-Frame L-Frame S29369 S32621 S29354 S32614 Not available in HD or HG 2P modules. 111 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Interlocking Devices using Keylocks (Captive Keys) Interlocking using keylocks makes it possible to interlock two or more devices that are physically distant or that have very different characteristics, for example medium-voltage and low-voltage devices or a PowerPact H-, J-, and L-frame circuit breaker and automatic switch. Each device is equipped with an identical keylock and the key is captive on the closed (ON) device. A single key is available for all devices. It is necessary to first open (OFF position) the device with the key before the key can be withdrawn and used to close another device. All rotary-handle PowerPact H-, J-, and L-frame circuit breakers and automatic switches can be interlocked between each other or with any other device equipped with the same type of keylock. For circuit breakers equipped with rotary handles or a motor operator. Interlocking with keys may be easily implemented by equipping each of the circuit breakers, either unit-mount or drawout, with a directly mounted rotary operating handle and a standard keylock, with only one key for the two keylocks. This solution enables interlocking between two circuit breakers that are geographically distant or that have significantly different characteristics. Use: • • A keylock adapter (one required for each circuit breaker) Two identical keylocks with a single key See Table 96 for more information. ON I Interlocking with Keys 112 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Sealing Accessory The sealing accessory kits includes the elements required to fit seals to prevent: • • • • • • • • • Front accessory cover removal Rotary handle removal Opening of the motor operator Access to accessories Access to trip unit settings Access to ground-fault protection settings Trip unit removal Terminal cover removal Access to power connections Table 103: Sealing Accessory Kits Description Kit No. Qty. Trip Unit Sealing Accessory Kit MICROTUSEAL 6 Front Cover Screws Sealing Accessory Kit S29375 6 Front-Panel Escutcheons • • • For unit-mount or plug-in installation. Front-panel escutcheons for toggle handles secures to the panel from the front. Front-panel escutcheons for motor-operated or rotary-operating handle secures to the panel by four screws from the front. 22 O OFFOFF O ON I d arge d disch arge disch 5...8 8 5... 1 OO OFF push h OFF pus push to trip Table 104: II 1 ON push h ON pus auto manu push to trip O OFF Front-Panel Escutcheons Kit Number Description H-, J-Frame L-Frame Front Panel Escutcheon for Toggle Circuit Breakers S29315 Front Panel Escutcheon for Rotary Handle, Motor Operator S29317 or Extended Escutcheon 32556 S32558 113 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Toggle Collars (For Drawout Mounting) Toggle collars make it possible to maintain degrees of protection regardless of the circuit breaker position (connected, disconnected): • • • • push to trip Front panel escutcheons are required (identical to those for rotary handle and ammeter module) Toggle collars are secured by two screws on the circuit breaker Front panel escutcheons are secured on the enclosure Toggle extension is supplied with the toggle collar Front panel escutcheons for motor operator and rotary operating handles are the same as for the unitmount circuit breakers. Table 105: Toggle Collars Description H-, J-Frame Kit Number L-Frame Kit Number Toggle Collar S29284 S32534 Toggle Boot • • NEMA 1, 2, 3, 3R protection Fits on front of circuit breaker Table 106: Toggle Boot Kit Number Description Toggle Boot 1 H-, J-Frame1 L-Frame S29319 S32560 Not available for HD and HG 2P modules. Handle Extension NS 400-630 Designed to extend the circuit breaker handle for easier manual circuit breaker operation. Table 107: T-Handle Extension Handle Extensions Kit Number Description Qty. H-, J-Frame T-Handle Extension (Temporary) 1 Toggle Extension (Fixed) 5 L-Frame — 32595 S29313 S432553 Toggle Extension 114 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Circuit Breaker Enclosures and Enclosure Accessories Table 108: • Square D™ brand circuit breaker enclosures are UL Listed/CSA Certified and are suitable for use as service entrance equipment, except as footnoted. • The short circuit rating of an enclosed circuit breaker is equal to the rating of the circuit breaker installed, except as footnoted. • Circuit breakers are ordered and shipped separately for field installation. Minimum Enclosure Dimensions 1.00 Min. (25.4) 1.00 Min. (25.4) Enclosure Dimensions (h x w x d) Circuit Breaker 00 Min. Amperage HD/HG /HJ/HL 4.00 Min. (101.6) 15–150 A HR JD/JG/ JJ/JL1 h 150–250 A JR LD/LG/ LJ/LL 4.00 Min. (101.6) 250–600 A LR d 1 Standard (80%) 100% Rated 15.6 x 6.12 x 3.49 in. (396 x 155 x 89 mm) 15.6 x 6.12 x 3.49 in. (396 x 155 x 89 mm) 18.13 x 8.63 x 4.13 in. (461 x 219 x 105 mm) 62 x 22.5 x 14 in. (1575 x 572 x 356 mm) 18.72 x 6.12 x 3.49 in. (476 x 155 x 89 mm) 18.72 x 6.12 x 3.49 in. (476 x 155 x 89 mm) 28.5 x 12.38 x 5.38 in. (724 x 314 x 137 mm) 62 x 22.5 x 14 in. (1575 x 572 x 356 mm) 35.48 x 12.00 x 4.45 in. 901 x 305 x 113 mm) 35.48 x 12.00 x 4.45 in. (901 x 305 x 113 mm) 40.5 x 13.75 x 4.33 in. (1030 x 350 x 110 mm) 40.5 x 13.75 x 4.33 in. (1030 x 350 x 110 mm) Minimum enclosure insulation required if circuit breaker side < 4.13 in. (105 mm) from metal. h Table 109: Circuit Breaker Enclosure Catalog Numbers Circuit Breaker Cat. No. Prefix Enclosure Cat. No. Rating NEMA 1 Flush Poles HDL,HGL,HJL,HLL 15–150 A 2, 3 JDL,JGL,JJL,JLL 150–250 A 2, 3 NEMA 1 Surface J250F NEMA 3R1 NEMA 4, 4X, 5, 3, 3R Stainless Steel NEMA 12/3R, 5 (Without Knockouts)2 J250S J250R J250DS J250AWK HDL 15–100 A 3 — HD100S3, 4, 5 — — — JDL 150–250 A 3 — JD250S3, 5, 6 — — — 1 Enclosures with NRB or RB suffix have provisions for 3/4 in. through 2-1/2 in. bolt-on hubs in top endwall. Enclosures with R suffix have blank endwalls and require field cut opening. 2 Suitable for rainproof NEMA 3R application by removing drain screw from bottom endwall. 3 Copper wire only. 4 Maximum short circuit current rating is 25 kA, 240 Vac. 5 Order service ground kit PKOGTA2 if required. 6 Maximum short circuit current rating is 18 kA, 480 Vac. Table 110: Dimensions Approximate Dimension H Cat. No. Series H W D H HD100S A01 17.00 in. 431.8 mm 7.90 in. 200.7 mm 4.75 in. J250F A01 32.40 in. 823 mm 15.40 in. 391 mm 6.00 in. 120.7 mm 152 mm J250S A01 31.36 in. 797 mm 14.36 in. 365 mm 6.00 in. 152 mm J250R A01 31.05 in. 789 mm 14.47 in. 368 mm 6.28 in. 160 mm J250DS A01 32.26 in. 819 mm 9.72 in. 247 mm 7.94 in. 202 mm J250AWK A01 32.26 in. 819 mm 9.72 in. 247 mm 7.94 in. 202 mm W W D WB enclosure uses 2 circuit breakers NEMA Type 1 115 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Accessories and Auxiliaries Table 111: Insulated Grounded Neutral Assembly Circuit Breaker Neutral Assembly For Use With NEMA 1 & 3R NEMA 4, 4X, 5, 12 & 12K Terminal Lug Data—Total Available (Line plus Load) AWG/kcmil Cat. No. Prefix Ampere Rating Cat. No. Cat. No. HDL, HGL, HJL, HLL 15–100 A SN100FA SN100FA (4) 14–1/0 Cu or (4) 12–1/0 Al HDL, HGL, HJL, HLL 125–150 A SN400LA SN400LA (2) 1–600 or (4) 1–250 Al/Cu, plus (2) 4–300 Al/Cu JDL, JGL, JJL, JLL 150–250 A SN400LA SN400LA (2) 1–600 or (4) 1–250 Al/Cu, plus (2) 4–300 Al/Cu Table 112: Service Ground Kits Circuit Breaker Cat. No. Prefix HDL, HGL, HJL, HLL, JDL, JGL, JJL, JLL Ground Bar Cat. No. Number of Terminals Conductors Per Terminal Wire Range PKOGTJ250 2 1 6 AWG–300 kcmil Al/Cu 116 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Section 9—Circuit Breaker Mounting and Connections .9 4 . 9 5 .9 6 .9 7 .9 3 C2 T C1 /SH M X 40V 5 .2 E 0 >11 % Ir 200/2 .9 8 .9 2 .9 1 Ir (4x Io ) 5 3 6 2 .5 8 2 10 1 .5 Is d ( x Ir ) M icor lo g ic >30 A >30 2 .2 r o lo g M ic 4 >3 0A 1 0 > r % I 10 140 125 110 100 .9 4 5 16017 .9 3 200 .9 2 225 .9 250 Io ( A .9 5 .9 6 .9 7 .9 8 1 Ir ( x 6 2 .5 8 2 ic 5 3 >3 Ir Is d 10 1 .5 ( Is d x Ir ) Io ) ) Mounting Configurations The PowerPact™ H-, J-, and L-frame circuit breakers are available in a variety of configurations. Table 113: Mounting Options Poles Termination Letter Options Code Suffix H-, J-Frame L-Frame A = I-Line 3 Pole Only 3 Pole Only F = Bus Bar 3 Pole Only 3 or 4 Pole L = Lugs on Both Ends 3 Pole Only 3 or 4 Pole M = Lugs ON End 3 Pole Only 3 or 4 Pole For factory-installed terminations, place termination letter in the third block of the circuit breaker catalog number. P = Lugs OFF End 3 Pole Only 3 or 4 Pole LGD36400U31XHJ00 N = Plug-In 3 Pole Only 3 or 4 Pole D = Drawout 3 Pole Only 3 or 4 Pole S = Rear Connection 3 Pole Only 3 or 4 Pole (N, and D Terminations Only) Termination No. H = Plug-In or Drawout J = No Stationary part 0 = No Switches 0 = No Shutters Options Code Refer to circuit breaker installation bulletin before installing circuit breaker, accessories, or wiring. 117 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Unit-Mount Circuit Breakers The standard lugs can be removed for the installation of compression-type lugs or bus connections. All lugs are UL Listed/CSA Certified for their proper application and marked for use with aluminum and copper (Al/Cu) or copper only (Cu) conductors. Lugs suitable for copper and aluminum conductors are made of tin-plated aluminum. Mounting H-, J-, and L-frame circuit breakers may be mounted vertically, horizontally or flat on their back without any derating of characteristics. Unit-mount H- and J-frame circuit breakers are supplied with two mounting screws, unit-mount L-frame circuit breakers are supplied with four mounting screws. These mounting screws are inserted through mounting holes molded into the circuit breaker case and threaded into the mounting enclosure, rails or through the panel door for flush mounting. A DIN rail mounting bracket (catalog no. S29305) is available for the H- and J-frame circuit breakers. NOTE: DIN rail mounting is not compatible with motor operated applications. Figure 5: Unit-Mounting Options H-, J-Frame Circuit Breakers (2 Mounting Screws) Mounting on Rails Mounting on Backplate Flush Mounting L-Frame Circuit Breakers (4 Mounting Screws) Mounting on Rails Mounting on Backplate push to trip Flush Mounting push to trip push to trip push to trip 118 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections I-Line™ Circuit breakers PowerPact H-, J-, and L-frame circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. I-Line circuit breakers use “blow-on” type line side connectors. In case of a short circuit, increased magnetic flux causes the plug-on connectors of the circuit breaker to tighten their grasp on the bus bars. The I-Line connectors and circuit breaker mounting bracket are integral parts of I-Line circuit breakers and cannot be removed or replaced. I-Line circuit breakers come with mechanical load side lugs, or optional terminal nut to connect to bus bars or to compression (crimp) lugs. . Table 114: push to Phase Options—Example HDA36150 Phase Option Phase Number Connection 2P Example 1 AB HDA261501 — 2 AC HDA261502 — 3 BA HDA261503 — 4 BC HDA261504 — 5 CA HDA261505 — 6 CB HDA261506 Standard ABC — HDA36150 6 CBA — HDA361506 3P Example — Plug-In Circuit Breaker Mounting The plug-in base is mounted through a panel. The plug-in configuration makes it possible to: • • Extract and/or rapidly replace the circuit breaker without having to touch connections Allow for addition of future circuits at a later date When the circuit breaker is in the connected position, the primary voltage is fed through the circuit breaker by means of multiple finger disconnects. Control voltage of internal accessories is provided through secondary disconnects. Parts of a Plug-In Configuration 4 5 3 • Safety Trip Interlock: The safety trip causes automatic tripping if the circuit breaker is ON before engaging or withdrawing it; the safety trip does not prevent the circuit breaker operation, even when the circuit breaker is disconnected. 2 • Primary Disconnects 1 Drawout Mounting Disconnects: Provides both primary and secondary disconnect to the circuit breaker. 3 • Plug-in Base: The plug-in base provides mounting through a front panel or mounting on rails. 2 • • 1 Plug-In Mounting 6 4 5 7 6 8 9 7 8 9 Secondary Disconnects Plug-in Base: The plug-in base provides mounting through a front panel or mounting on rails. Safety Trip Interlock Mounted on Back of Circuit Breaker Mandatory short terminal shields. 119 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Accessory circuits exit the circuit breaker using one to three secondary disconnecting blocks (nine wires each). Circuit breaker connection wires for the options installed with trip unit STR53UP exit through the automatic secondary disconnecting blocks. These are made up of: • • A moving part connected to the circuit breaker through a support (one support per circuit breaker). A fixed part mounted on the plug-in base, equipped with connectors for wire up to 14 AWG (2.5 mm2). For test purposes, circuit breakers may be equipped with one to three manual auxiliary connectors, which allow the auxiliaries to remain connected when in the “disconnected” position. Disconnecting Blocks Figure 6: Plug-In Base (Mounting Options) Mounting Through a Panel Mounting on Rails Manual Auxiliary Connector The L-frame plug-in mounting is Listed under UL file E113555 and Certified under CSA file LR 69561. 120 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Drawout Mounting The cradle is made up of two side plates installed on the plug-in base and two other plates mounted on the circuit breaker. The drawout mounting provides all of the functions of the plug-in base, plus: • Disconnected position—the power circuit is disconnected, the circuit breaker is simply withdrawn and may still be operated (on, off, push-to-trip) • Circuit breaker may be locked using 1 to 3 padlocks, diameter 0.19 to 0.31 inch (5–8 mm), to prevent connection • Auxiliaries can be tested using manual auxiliary connector Drawout mounting is on a backplate: • • Through a front panel or on rails Horizontally or vertically Accessories for drawout circuit breakers: • Auxiliary indicator contacts indicator contacts for installation on the fixed part of the cradle, indicating the “connected” and “disconnected” position • Toggle collar for circuit breakers with toggle through front panel, intended to maintain the degree of protections whatever the position of the circuit breakers (supplied with a toggle extension) • Keylock which can be used to — Prevent insertion for connection — Lock the circuit breaker in the connected or disconnected position • • Telescopic shaft for extended rotary handles Control voltage, which is provided through automatic secondary disconnect in the connected position only. Electrical accessories can be tested in the disconnected position with an external wiring harness. The drawout-mounted cradle is listed under UL file E113555 and certified under CSA file LR69561. Figure 7: Drawout Mounting Positions Connected Disconnected Removed 121 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Table 115: Plug-In and Drawout Mountings for H- and J-Frame Circuit Breakers (3P or 2P in a 3P module) Factory FieldInstalled Installed Suffix Cat. No. Description Complete Factory-Assembled Plug-in base shipped with circuit breaker Circuit Breakers Drawout cradle shipped with circuit breaker Plug-In Base Special Order Options for Plug-In and Drawout Circuit Breakers Circuit breaker Only — D — HJ00 Plug-in base kit S29278 Circuit breaker only Drawout Cradle N HJ00 Plug-in base kit S29278 Cradle side plates (fixed part of chassis) S29282 Circuit breaker side plates (moving part of chassis) Accessories for Plug-In and Drawout Table 116: S29283 H-Frame Shutter Kit (set of two) S37442 J-Frame Shutter Kit (set of two) S37443 Secondary Disconnect Blocks Fixed part 9-wire connector (mounted on base) S29273 Moving part 9-wire connector (mounted on circuit breaker) S29274 Support for 2-moving connectors S29275 Extended escutcheon with extended toggle collar S29284 Two position indicating switches (connected/disconnected) S29287 H-Frame Short Terminal Covers (3P) S37436 J-Frame Short Terminal Covers (3P) S37440 Plug-In and Drawout Mountings for L-Frame Circuit Breakers Plug-in Mounting Description Poles Kit (stationary and moving parts) Plug-in base Stationary Part Factory Installed Suffix Drawout Mounting FieldInstalled Qty Factory Installed Suffix Kit. No. FieldInstalled Qty Kit. No. 3 N — D — 4 N — D — 3 S32514 S32514 4 S32515 S32515 Fixed part of chassis S32532 Circuit breaker only Short terminal covers Handle Escutcheon HJ00 Moving part of chassis Moving Part 1 HJ00 S32533 3 2x1 S32562 2x1 S32562 4 2x1 S32563 2x1 S32563 Order two of kit. Table 117: Plug-In and Drawout Accessories Field-Installed Kit No. Plug-In and Drawout Accessories H-, J-Frame Fixed Part push to trip Secondary Disconnecting Blocks1 Moving Part L-Frame 9-Wire Connector S29273 S29273 9-Wire Connector S29274 S32523 2x2 S29275 Support for Moving Connectors S32525 9-Wire Connector for Disconnected Operation Shutter Two Shutters for Plug-In Base 29271 32521 Extended Escutcheon for Toggle Collar S29284 S32534 Locking Device (Key Lock is Not Included) S29286 S29286 Two Position Indicator Contacts (Connected/Disconnected) S29287 S29287 Classic Accessories 1 Included when electrical accessories are factory installed. 2 Order two of kit. 3 Order three of kit. — 3x3 Manual Auxiliary Connector S29272 122 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Connection Rear Connection For connection of bus bars or cables with compression lugs. Rear connections are easily installed on the circuit breaker terminals. The same connection may be installed flat, edgewise or at a 45° angle. All combinations are possible. The circuit breaker is mounted on a backplate. One Long and Two Short Four Positions Possible for Each Connector Horizontal Vertical 45° Angle push to trip Table 118: Rear Connections H-Frame Device Description Mixed Rear Connection Kit1 Short rear connections (set of 2) Long rear connections (set Consisting of: of 2) J-Frame FactoryFactoryFieldInstalled Installed Poles Installable Poles Termination Termination Cat. No. No. No. L-Frame FactoryInstalled Field-Installed Poles Termination Cat. No. No. FieldInstalled Cat. No. 2 S — 2 S — 3 S S32477 3 S S37432 3 S S37437 4 S S32478 — 2x2 S37433 2x2 S37438 — 2 or 3 2 or 3 — S37434 — 2x2,3 S432475 — 2x3 S432476 3 — S37439 4 Short terminal cover (3P) 3 — S37436 3 — S37440 3 — 2x5 S32562 Short terminal cover (4P) 4 — — — — 4 — 2x5 S32563 — 1 Kit contains four short rear connections, two long rear connections (four long rear connections for 4P), hardware and two terminal covers. 2 Order two kits (two in kit x two kits for total of four). 3 Parts only, no hardware is included. See Table 119, below. 4 For use with 3P circuit breakers only. 5 Order two kits (kit contains only one terminal cover, two terminal covers are required per circuit breaker). Table 119: L-Frame Rear Connection Hardware Description Cat. No. Set of 4 M10 x 25 terminal screws and washers for one side. S36967 Mechanical Lugs Unit-mount H-, J-, and L-frame circuit breakers can be ordered with mechanical line and load side lugs. The standard lugs can be removed for the installation of compression-type lugs or bus connections. All lugs are UL Listed/CSA Certified for their proper application and marked for use with aluminum and copper (Al/Cu) or copper only (Cu) conductors. Lugs suitable for copper and aluminum conductors are made of tin-plated aluminum. Lugs suitable for use with copper conductors only are made of copper. Mechanical Lugs for the H- and J-frame circuit breakers lay on top of the circuit breaker terminals and can be installed without the use of any tools. The lugs are held in place with snap features built into the insulating retainer and are secured with the clamp force applied to the wire binding screw. Mechanical lugs are sold either factory installed or as field installable kits. 123 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Table 120: Mechanical Lug Kits for H-Frame and J-Frame Circuit Breakers Circuit Breaker Application Ampere Rating Standard Al Lugs for Use with Al or Cu Wire Optional Number of Wires Per Lug and Wire Range Ampere Rating HD, HG, HJ, HL 15–150 A (1) 14–3/0 AWG Al or Cu AL150HD 3 150–175 A (1) 4-4/0 AWG Al or Cu AL175JD 3 JD, JG, JJ, JL 200–250 A (1) 3/0–350 kcmil Al or Cu AL250JD 3 JD, JG, JJ, JL 150–175 A HD, HG, HJ, HL 15–150 A (1) 14–2/0 AWG Cu JD, JG, JJ, JL (1) 1/0–300 kcmil Cu 150–250 A CU250JD 3 S37423 2 Control Wire Terminal for J-frame lug kit S37424 2 Mechanical Lug Kits for L-Frame Circuit Breakers1 Circuit Breaker Application Ampere Unit Poles Rating Mount 250 Al Lugs for Use with Al or 400/600 Cu Wire 06163038 06163037 400/600 250/400 Cu Lugs for Use with Cu Wire Only 400/600 400/600 600 A Lug AL600LF52K3 CU150HD 3 Control Wire Terminal for H-frame lug kit Table 121: 600 A Lug AL600LS52K3 Qty Per Kit JD, JG, JJ, JL Cu Lugs for Use with Cu Wire Only 400 A Lug AL400L6IK3 Kit Cat. No. Number of Wires Per Lug and Wire Range2 I-Line Kit Cat. No. Qty Type of Per Terminal Kit Shield3 3 X X (1) 2 AWG–500 kcmil Al AL400L61K3 3 Short 4 X — (1) 2 AWG–600 kcmil Cu AL400L61K4 4 Medium AL600LS52K34 3 Medium AL600LS52K44 4 Medium (2) 3/0 AWG–500 kcmil Al or Cu AL600LF52K34 3 Short X (1) 2 AWG–500 kcmil Al CU400L61K3 3 Short X — (1) 2 AWG–600 kcmil Cu CU400L61K4 4 Medium X — CU600LS52K34 3 Medium 4 X — CU600LS52K44 4 Medium 3 X X CU600LF52K34 3 Short 3 X — 4 X — 3 X X 3 X 4 3 (2) 2/0 AWG–500 kcmil Al or Cu (2) 2/0 AWG–500 kcmil Al or Cu (2) 3/0 AWG–500 kcmil Al or Cu 1 For lug pack information, see Figure 31 on page 160. 2 For control wire installation, use an 8-32 x 1/4 in. screw (not provided) into tapped control wire hole in lower left hand corner of lug. 3 For terminal shield dimensions, see Figure 31 on page 160. 4 Terminal shields are included in mechanical lug kits. Voltage Takeoff (Control Wire Terminals) for Mechanical Lugs and Terminal Nuts Mechanical Lug Control Wire Terminal Control Wire Hole Powerpact H- and J-Frame mechanical lugs may be equipped with a separate control wire termination. The kit is available factory installed or as a field installable kit. The adaptor is secured underneath the lug and has a tab extension suitable for attachment of a 0.250 inch slip-on connector. All L-frame mechanical lugs are pre-tapped for control wires. For control wire installation, use an 8-32 x 1/4 in. screw (not provided) into tapped control wire hole in lower left hand corner of the lug. Fully insulated type connectors must be used to prevent live parts from extending into the wiring gutter area. Table 122: Busbar Control Wire Terminal Control Wire Terminals Description Frame Cat. No. Qty Per Kit Mechanical Lugs Control Wire Terminal for H-Frame Lugs HD/HG/HJ/HL S37423 2 Control Wire Terminal for J-Frame Lugs JD/JG/JJ/JL S37424 2 Busbar Connection Control Wire Terminal for H-Frame Terminal Nut HD/HG/HJ/HL S37429 2 Control Wire Terminal for J-Frame Terminal Nut JD/JG/JJ/JL S37430 2 124 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Bus-Bar Connections The H-, J- and L-frame circuit breakers may be equipped with captive nuts and screws for direct connection to bars or to compression (crimp) lugs. For H- and J-frame, these are readily field-installable, simply by removing the mechanical lug and replacing with the appropriate terminal nut inset described in Table 123. They are also available factory-installed, using the Product Selector or by using the catalog suffixes below. For L-frame, the mechanical lug can be removed, leaving the threaded nut insert intact. This configuration may be ordered with the suffixes described below. Connection hardware (terminal screws) must be ordered as in table 123. Table 123: Factory-Installed Terminal Nut Inserts for Bus or Crimp Lug Connection Cat. No. Termination (Position 4) Special Terminations Options Description F Terminal nut insert on both ends; no lugs either end M Terminal nut insert on OFF end; lugs on ON end only P Terminal nut insert on ON end; lugs on OFF end only A -TA I-Line on ON end; English terminal nuts on OFF end1 A -TB I-Line on ON end; Metric terminal nuts on OFF end1 F, M, or P -TW For -F-, Metric terminal nuts on both ends1 F, M, or P -TX 1 For -P, Metric terminal nuts on ON end; lugs on OFF end For H- and J-frame only. L-frame terminal nuts are metric only. Table 124: Terminal Nut Insert For -M, lugs on ON end; Metric terminal nuts on OFF end Terminal Nuts for Bus Bar Connection of H-Frame and J-Frame Circuit Breakers Description Frame Tap Cat. No. Qty Per Kit H-Frame Terminal Nut Insert–English HD/HG/HJ/HL 1/4-20 S37425 2 H-Frame Terminal Nut Insert–English HD/HG/HJ/HL 1/4-20 S37444 3 H-Frame Terminal Nut Insert–Metric HD/HG/HJ/HL M6 S37426 2 J-Frame Terminal Nut Insert–English JD/JG/JJ/JL 1/4-20 S37427 2 J-Frame Terminal Nut Insert–English JD/JG/JJ/JL 1/4-20 S37445 3 J-Frame Terminal Nut Insert–Metric JD/JG/JJ/JL M8 S37428 2 Table 125: H-Frame J-Frame L-Frame A 0.250 in. (6.4 mm) 0.3125 in. (7.9 mm) 0.4 in. (10 mm) B 0.125–0.375 in. (3.2–9.5 mm) 0.125–0.375 in. (3.2–.5 mm) 0.11–0.39 in. (3–10 mm) C 0.50 in. (12.7 mm) 0.50–0.75 in. (12.7–1.1 mm) 1.35 in. (32 mm) D 0.3 in. (7.6 mm) 0.625 in. (15.9 mm) <0.51 in. 13 mm) Table 126: 80–90 lb-in (9–10.2 N•m) 80–90 lb-in (9–10.2 N•m) Bar Dimensions Dimension E Torque 0.3 in. (7.6 mm) 0.375 in. (9.5 mm) 0.64 in. (16 mm) B D AØ E = = C L-Frame Bus Bar Connections Hardware Description Cat. No. Set of 4 M10 x 25 terminal screws and washers for one side. S36967 125 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Power Distribution Connectors The power distribution connectors (PDC) can be used for multiple load wire connections on one circuit breaker. Use in place of standard distribution blocks to save space and time. Field installable kit includes tin-plated aluminum lug, connectors, and required mounting hardware. • • • • For use on load end of circuit breaker only For use in UL 508 Industrial Control applications For use in UL 1995/CSA C22.2 No. 236 heating and cooling equipment For copper wire only Table 127: Power Distribution Connectors Frame Qty per Kit Kit Number Wires per Terminal Wire Range 8–6 AWG (10–16 mm2) 25 lb-in. (2.8 N•m) 14–10 AWG (2.5–6 mm2) 20 lb-in. (2.3 N•m) 2 AWG (35 mm2) 40 lb-in. (4.5 N•m) 14–3 AWG (2.5–35 mm2) 35 lb-in. (4.0 N•m) 8–4 AWG (10–25 mm2) 35 lb-in. (4.0 N•m) 14–10 AWG (2.5–6 mm2) 20 lb-in. (2.3 N•m) 14–6 AWG Cu (2.5–16 mm2) or 35 lb-in. (4.0 N•m) 4–1 AWG Cu (25–50 mm2) 40 lb-in. (4.5 N•m) 3–2/0 AWG Cu (35–70 mm2) 50 lb-in. (5.6 N•m) 4–1 AWG (25–50 mm2) or 40 lb-in. (4.5 N•m) 3 14–6 AWG (2.5–16 mm2) 35 lb-in . (4.0 N•m) and 2 3–2/0 AWG (35–70 mm2) 50 lb-in. (5.6 N•m) 8–4 AWG (10–25 mm2) 35 lb-in. (4.0 N•m) 14–10 AWG (2.5–6 mm2) 20 lb-in. (2.3 N•m) PDC6HD6 1 6 PDC3HD2 1 3 PDC6JD4 1 6 H-Frame J-Frame 3 total PDC3JD20 2 1 and 1 5 total PDC5DG20L3 1 3 L-Frame PDC12DG4L3 1 1 3 Wire Binding Screw Torque 12 Kit includes terminal shield. See Table 130 for the phase barriers for power distribution connectors. 126 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Compression Lugs Both copper and aluminum compression lug kits are available for the H-, J-, and L-frame circuit breakers. Each kit contains required insulators and all mounting hardware. Compression lugs require the long lug cover pack, see Figure 31 on page 160. Table 128: Circuit Breaker Compression Lug Kits for Al/Cu Connectors Lug Kit Rating at 75°C Poles Wires per Lug Wire Range Lugs per Terminal Lugs per Kit Al Cu YA060HD ≤ 60 A ≤ 60 A 3 1 6–2 AWG Cu or Al (16–35 mm2) 1 3 YA150HD ≤ 150 A ≤ 150 A 3 1 1/0–4/0 AWG Cu or Al (50–95 mm2) 1 3 YA150JD ≤ 200 A ≤ 200 A 3 1 1–3/0 AWG Cu or Al (50–95 mm2) 2 3 YA250J35 ≤ 250 A ≤ 250 A 3 1 3/0 AWG–350 kcmil Cu or Al (95–185 mm2) 2 3 YA400L31K3 230 A 285 A 3 1 4-300 kcmil Al/Cu (25–150 mm2) 1 3 YA600L32K3 460 A 570 A 3 2 4-300 kcmil A/Cu (25–150 mm2) 2 6 YA400L51K3 310 A 380 A 3 1 2/0-500 kcmil A/Cu (70–240 mm2) 1 3 YA600L52K3 620 A 760 A 3 2 2/0-500 kcmil Al/Cu (70–240 mm2) 2 6 YA400L71K3 385 A 380 A 3 1 500-750 kcmil A (240–400 mm2)l 500 kcmil Cu (240 mm2) 1 3 YA600L32K4 460 A 380 A 4 2 4-300 kcmil A/Cu (25–150 mm2) 1 8 YA400L51K4 310 A 380 A 4 1 2/0-500 kcmil Al/Cu (70–240 mm2) 2 4 YA600L52K4 620 A 760 A 4 2 2/0-500 kcmil Al/Cu (70–240 mm2) 1 8 YA400L71K4 385 A 475 A 4 1 500-750 kcmil Al (240–400 mm2) 500 kcmil Cu (240 mm2) 2 4 Al/Cu Connectors H-Frame J-Frame L-Frame 127 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Circuit Breaker Mounting and Connections Table 129: Circuit Breaker Compression Lug Kits for Cu Connectors Rating @ 75 C Lug Kit Al Poles Cu Wires per Lug Wire Range Lugs per Terminal Lugs per Kit CYA060HD — ≤ 60 A 3 1 6–1/0 AWG Cu (16–50 mm2) 1 3 CYA150HD — ≤ 150 A 3 1 4–2/0 AWG Cu (25–70 mm2) 1 3 1 3 H-Frame CYA150JD — ≤ 150 A 3 1 4–2/0 AWG Cu (25–70 mm2) CYA250J3 — ≤ 250 A 3 1 2/0 AWG–300 kcmil Cu (70–185 mm2) 1 3 CYA400L31K3 — 285 A 3 1 2/0-300 kcmil Cu (70–150 mm2) 1 3 CYA600L32K3 — 570 A 3 2 2/0-300 kcmil Cu (70–150 mm2) 2 6 1 3 J-Frame CYA400L51K3 — 380 A 3 1 250-500 kcmil Cu (150–240 mm2) CYA600L52K3 — 760 A 3 2 250-500 kcmil Cu (150–240 mm2) 2 6 CYA400L31K4 — 285 A 4 1 2/0-300 kcmil Cu (70–150 mm2) 1 4 CYA600L32K4 — 570 A 4 2 2/0-300 kcmil Cu (70–150 mm2) 2 8 1 4 2 8 L-Frame CYA400L51K4 — 380 A 4 1 250-500 kcmil Cu (150–240 mm2) CYA600L52K4 — 760 A 4 2 250-500 kcmil Cu (150–240 mm2) Terminal Shields H-Frame Short Lug Shield J-Frame Short Lug Shield Phase barrier or terminal shield extension past end of circuit breaker “B” See Table Table 130: Terminal Shields and Phase Barriers Used With H- and J-Frame Mechanical Lugs Description Short Lug Shield Extremity of Molded Case w/Mechanical Lugs Frame Max. Wire Size H-Frame 60 A 3 AWG 0.50 in. S37446 1 H-Frame 150 A 3/0 AWG 0.50 in. S37447 1 J-Frame 350 kcmil 0.24 in. S37448 1 2.24 in. S37449 1 1.68 in. S37450 1 Compatible with: PDC H- and J-Frame Power Distribution Connectors H-Frame Long and Compression Lugs Lug Shield “B” See Table Dimension B Cat. No. Qty Per Kit J-Frame Long Lug Shield Compression Lugs Aluminum Copper PDC6HD6 YA060HD CYA060HD PDC3HD2 YA150HD CYA150HD PDC6JD4 YA150JD CYA150JD PDC3JD2 — CYA250J3 C 128 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Section 10—Installation Recommendations Operating Conditions Temperature Derating • PowerPact™ H-, J-, and L-frame circuit breakers may be used between -13°F and 158°F (-25 °C and +70 °C). For temperatures higher than 104° F (40° C°) inside the enclosure, devices must be derated. • Circuit breakers should be put into service under normal ambient, operating-temperature conditions. • The permissible storage-temperature range for PowerPact H-, J-, and L-frame circuit breakers in the original packing is -58°F1 and 185°F (-50 °C1 and +85 °C). Table 131: t Temperature Derating for H-Frame Trip Unit Thermal Protection—Long-Time Temperature1 0 ln li l H-Frame Trip Curve (ln) Fixed threshold thermal protection against overload (li) Fixed threshold instantaneous protection against short circuits Rating (A) In °C °F -10 14 23 30 38 46 53 60 68 76 88 103 112 123 137 160 180 221 0 32 21 28 36 43 49 56 63 71 83 97 107 117 131 151 171 207 10 50 20 26 33 40 46 52 59 66 77 90 101 111 126 141 161 194 20 68 18 24 31 37 42 48 54 62 72 84 96 105 120 132 152 180 30 86 17 22 28 34 39 44 50 56 66 77 88 98 110 121 139 165 40 104 15 20 25 30 35 40 45 50 60 70 80 90 100 110 125 150 50 122 12 17 21 25 30 34 38 43 53 62 72 80 86 95 109 131 60 140 9 14 17 20 24 28 31 35 46 53 63 70 72 80 93 111 1 Shaded areas indicate temperature rerated values, non-shaded areas inside an enclosure are standard circuit breaker ampere ratings at 104° F (40° C°). Table 132: Temperature Derating for J-Frame Trip Unit Thermal Protection—Long-Time t Temperature1 0 ln lm l J-Frame Trip Unit (ln) Fixed threshold thermal protection against overload (lm) Adjustable instantaneous protection against short circuits Rating (A) In °C °F -10 14 221 264 289 330 377 0 32 207 247 273 310 354 10 50 194 230 256 290 330 20 68 180 213 240 270 307 30 86 165 194 220 248 279 40 104 150 175 200 225 250 50 122 131 150 176 193 214 60 140 111 124 151 160 177 1 1 Shaded areas indicate temperature rerated values, non-shaded areas are standard circuit breaker ampere ratings at 104° F (40° C°). -40°F (-40 °C) for Micrologic trip units with an LCD screen. 129 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations PowerPact H-, J- and L-Frame Circuit Breakers Equipped with Electronic Trip Units Electronic trip units are not affected by variations in temperature. If the trip units are used in hightemperature environments, the Micrologic™ trip unit setting must nevertheless take into account the temperature limits of the circuit breaker. Changes in temperature do not affect measurements by electronic trip units. • • The built-in CT sensors with Rogowski coils measure the current. The control electronics compare the value of the current to the settings defined for 104°F (40°C). Because temperature has no effect on the CT measurements, the tripping thresholds do not need to be modified. However, the temperature rise caused by the flow of current combined with the ambient temperature increases the temperature of the device. To avoid reaching the thermal withstand value, it is necessary to limit the current flowing through the device, that is the maximum Ir setting as a function of the temperature. The table below indicates the maximum long-time (LT) protection setting Ir (A) depending on the ambient temperature. Table 133: Derating Circuit Breakers with Micrologic Trip Units Temperature Type of Device Rating 104°F (40°C) 113°F (45°C) 60 A No derating 100 A No derating 150 A No derating 122°F (50°C) 131°F (55°C) 140°F (60°C) 149°F (65°C) 158°F (70°C) H-Frame Unit-mount, plug-in or drawout J-Frame Unit-mount 250 A 250 250 250 245 237 230 225 Plug-in or drawout 250 A 250 245 237 230 225 220 215 L-Frame Unit-mount 400 A 400 400 400 390 380 370 360 Plug-in or drawout 400 A 400 390 380 370 360 350 340 Unit-mount 600 A 600 600 600 585 570 550 535 Plug-in or drawout 600 A 570 550 535 520 505 490 475 Example. A unit-mount PowerPact L-frame circuit breaker equipped with a Micrologic can have a maximum Ir setting of: • • 400 A up to 122°F (50 °C) 380 A up to 140°F (60 °C) 130 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations 2000 M Altitude Derating Altitude does not significantly affect the characteristics of PowerPact H-, J-, and L-frame circuit breakers circuit breakers up to 6560 ft. (2000 m). Above this altitude, it is necessary to take into account the decrease in the dielectric strength and cooling capacity of air. The following table gives the corrections to be applied for altitudes above 6560 ft. (2000 m). The breaking capacities remain unchanged. Table 134: Altitude Derating Altitude Dielectric withstand voltage 6560 ft (2000 m) 9840 ft (3000 m) 13120 ft (4000 m) 16400 ft (5000 m) 3000 V 2500 V 2100 V 1800 V Insulation voltage Vi 800 V 700 V 600 V 500 V Maximum operational voltage Ve 690 V 590 V 520 V 460 V Average current capacity (A) at 104°F (40°C) In x 1 0. 0.96 0.93 0.9 400 Hz Derating Application of H- and J-frame circuit breakers at frequencies above 60 Hz requires that special consideration be given to the effects of high frequency on the circuit breaker characteristics. Thermal and instantaneous operations must be treated separately. At frequencies below 60 Hz, the thermal derating of PowerPact H and J-frame circuit breakers is negligible. However, at frequencies above 60 Hz, thermal derating is required. One of the most common high frequency applications is at 400 Hz. Table 135: 400 Hz Derating Circuit Breaker 400 Hz Derating Multiplier H-Frame 0.90 J-Frame 0.90 L-Frame, 400 A 0.80 L-Frame, 600 A 0.65 For more information, refer to Data Bulletin 0100DB0101, Determining Current Carrying Capacity in Special Applications. 131 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Installation in Equipment Power from the Top or Bottom PowerPact H-, J-, and L-frame circuit breakers with factory-sealed trip units can be supplied from either the top or the bottom without any reduction in performance. This capability facilitates connection when installed in end-use equipment. All connection and insulation accessories can be used on circuit breakers supplied either from the top or bottom. 3.2 olog ic Micr 4 5 3 0 >3 0A >3 10 >1 r % I 140 125 110 100 .9 4 5 16017 .9 3 200 .9 2 225 .9 250 Io ( A . 9 5 .9 6 .9 7 Ir ( x .9 8 1 6 2 .5 8 2 Ir Is d 10 1 .5 Is d ) ( x Ir Io ) ) Weight The table below presents the weights of the circuit breakers and the main accessories, which must be summed to obtain the total weight. The values are valid for all performance categories. Table 136: Weights Type of Device H-frame, 100 A H-frame, 150 A J-frame, 250 A L-frame, 600 A Circuit Breakers Base Cradle Motor Operator 2P 3.95 lbs. (1.79 kg) 1.75 lbs. (0.8 kg) 4.85 lbs. (2.2 kg) 2.65 lbs. (1.2 kg) 3P 4.52 lbs. (2.05 kg) 1.75 lbs. (0.8 kg) 4.85 lbs. (2.2 kg) 2.65 lbs. (1.2 kg) 2P 4.08 lbs. (1.85 kg) 1.75 lbs. (0.8 kg) 4.85 lbs. (2.2 kg) 2.65 lbs. (1.2 kg) 3P 4.85 lbs. (2.2 kg) 1.75 lbs. (0.8 kg) 4.85 lbs. (2.2 kg) 2.65 lbs. (1.2 kg) 3P 5.29 lbs. (2.4 kg) 1.75 lbs. (0.8 kg) 4.85 lbs. (2.2 kg) 2.65 lbs. (1.2 kg) 3P 13.65 lbs. (6.19 kg) 5.29 lbs. (2.4 kg) 4.85 lbs. (2.2 kg) 6.17 lbs. (2.8 kg) 4P 17.92 lbs. (8.13 kg) 6.17 lbs. (2.8 kg) 4.85 lbs. (2.2 kg) 6.17 lbs. (2.8 kg) Safety Clearances and Minimum Distances General Rules When installing a circuit breaker, minimum distances (safety clearances) must be maintained between the device and panels, bars and other protection devices installed nearby. These distances, which depend on the voltage, are defined by tests carried out in accordance with UL standards. If installation is not checked by type tests, it is also necessary to: • • use insulated bars for circuit-breaker connections segregate the busbars using phase barriers For PowerPact H-, J-, and L-frame devices, terminal shields and interphase barriers are recommended and may be mandatory depending on the operating voltage of the device and type of installation (unit-mount, drawout, etc.). Power Connections The table below indicates the connection requirements for PowerPact H-, J-, and L-frame devices to ensure insulation of live parts for the various types of connection. • • unit-mount devices with front connection or rear connection plug-in or drawout devices. Connection accessories such as crimp lugs, terminal extensions (straight, right-angle, double-L and 45°) and spreaders are supplied with interphase barriers. Long terminal shields provide a degree of protection of IP40 (ingress). 132 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Safety Clearance Safety Clearances Enclosure Dimensions W D > 1.00 > 1.00 H A1 HxWxD (25,4) (25,4) > 4.00 Standard (80%) Rated 100% Rated 15.6 x 6.12 x 3.49 in. (396 x 155 x 89 mm) 15.6 x 6.12 x 3.49 in. (396 x 155 x 89 mm) HR 18.13 x 8.63 x 4.13 in. (461 x 219 x 105 mm) 62 x 22.5 x 14 in. (1575 x 572 x 356 mm) JD/JG/ JJ/JL1 18.72 x 6.12 x 3.49 in. (476 x 155 x 89 mm) 18.72 x 6.12 x 3.49 in. (476 x 155 x 89 mm) JR 28.5 x 12.38 x 5.38 in. (724 x 314 x 137 mm) 62 x 22.5 x 14 in. (1575 x 572 x 356 mm) LD/LG/LJ/ LL 35.48 x 12.00 x 4.45 in. 901 x 305 x 113 mm) 35.48 x 12.00 x 4.45 in. 901 x 305 x 113 mm) 40.5 x 13.75 x 4.33 in. (1030 x 350 x 110 mm) 40.5 x 13.75 x 4.33 in. (1030 x 350 x 110 mm) HD/HG/HJ/ HL (101,6) 15–150 A 150–250 A H 250–600 A LR 1 Minimum enclosure insulation required if circuit breaker side < 4.13 in. (105 mm) from metal. > 4.00 J-Frame Minimum Enclosure Insulation (101,6) 3.1 (79) W 3.25 (83) D If dimension A < 0.56 in. for H- and J-frame circuit breaker, attach fiber insulating plate, not provided, to enclosure cover. 18.72 (476) 12.5 [318) H- and J-Frame Fiber Insulating Plate .50 (12,7) .50 (12,7) 3.00 (76,2) .03 (,8) < .56 (14,2) 6.12 (155) 3.49 (89) 0.03 (0,8) 1.25 (31,8) Dimensions: in. (mm) 133 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Table 137: Minimum Safety Clearances Clearance Operating Voltage Between Between Device and Sheet Metal Devices Painted Sheet Metal Bare Sheet Metal V 440 V for devices equipped with: • No accessories 0 0 30 30 5 40 40 • Interphase barriers 0 0 0 0 0 0 0 • Long terminal shields 0 0 0 0 0 0 0 440 < V 600 for devices equipped with: • Interphase barriers1 0 0 0 0 20 10 10 • Long terminal shields 0 0 0 0 10 10 10 0 10 50 50 20 100 100 V > 600 V for devices equipped with: • 1 Long terminal shields Only for J-frame devices. Clearances with Respect to Live Bare Busbars Table 138: Minimum Safety Clearances to Bare Busbars Clearances to Live Bare Busbars1 Operating Voltage Spacing 60 mm Spacing > 60 mm V 440 V 350 350 80 80 440 V < V 600 V 350 350 120 120 1 These clearances can be reduced for special installations as long as the configuration is checked by tests. Control Wiring Remote Tripping by Undervoltage Trip (MN) or Shunt Trip (MX) Power requirements are approximately: • • Table 139: 30 VA for pick-up of the undervoltage trip (MN) and shunt trip (MX) 300–500 VA for the motor operator. \ Recommended Maximum Cable Lengths1 Power Supply Voltage (Vdc) 12 Vdc 24 Vdc Cable cross-section 16 AWG (1.5 mm²) 14 AWG (2.5mm²) 16 AWG (1.5 mm²) 14 AWG (2.5mm²) 48 Vdc 16 AWG (1.5 mm²) Undervoltage V source 100% Trip (MN) V source 85% 49 ft. (15 m) — 525 ft. (160 m) — 2100 ft. (640 m) — 23 ft. (7 m) — 131 ft. (40 m) — 525 ft. (160 m) — 14 AWG (2.5mm²) Shunt Trip (MX) V source 100% 197 ft. (60 m) — 787 ft. (240 m) — 3150 ft. (960 m) — V source 85% 98 ft. (30 m) — 394 ft. (120 m) — 1575 ft. (480 m) — Motor Operator V source 100% — 33 ft. (10 m) 52 ft. (16 m) 213 ft. (65 m) 361 ft. (110 m) — 6.6 ft. (2 m) 13 ft (4 m) 56 ft. (17 m) 82 ft. (25 m) 1 V source 85% — The indicated length is that of each of the two wires. 134 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations External Neutral Voltage Tap (ENVT) N A B C 3P+N Wire Ready for Connection I V ENVT This connection is required for accurate power measurements on 3-pole circuit breakers equipped with Micrologic 5 / 6 E trip units in installations with a distributed neutral. It can be used to measure phase-neutral voltages and calculate power using the 3 wattmeter method. PowerPact H-, J-, and L-frame 3-pole circuit breakers come with a wire installed on the device for the connection to the ENVT. This wire is equipped with a connector for connection to an external wire with: • • External Wire cross-sectional area of 18–14 AWG (1 mm² to 2.5 mm²) maximum length of 32.8 ft. (10 m). External neutral voltage tap (ENVT) External Neutral Current Transformer (ENCT) N A B C 3P+N: supply from the top T2 T1 I V H2 T1 ENCT H1 T2 This connection is required to protect the neutral on 3-pole circuit breakers equipped with Micrologic 5 / 6 A or E trip units in installations with a distributed neutral. For Micrologic 6 A or E, it is required for ground-fault protection. The ENCT is connected in the same way for unit-mount, plug-in or drawout devices: • unit-mount devices are connected using terminals T1 and T2 of the internal terminal block. • plug-in and drawout devices are not connected using the auxiliary terminals. The wires must be connected/disconnected inside the devices using terminals T1 and T2. The ENCT must be connected to the Micrologic trip unit by a shielded twisted pair. The shielding should be connected to the enclosure earth only at the CT end, no more than 12 in. (30 cm) from the CT. • the power connections of the CT to the neutral (H2 and H1) must be made in the same way for power supply from the top or the bottom (see figure). Make sure they are not reversed for devices with power supply from the bottom. • • cross-sectional area of 22–16 AWG (0.4 mm² to 1.5 mm²) maximum length of 32.8 ft. (10 m). 135 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations ULP Connection System Between Micrologic, FDM121 Module and Modbus™ Interface The ULP (Universal Logic Plug) wiring system used by H-, J- and L-frame circuit breakers for connection through the Modbus network requires neither tools nor settings. The prefabricated cables are used for both data transfer and distribution of 24 Vdc power. Connectors on each component are identified by ULP symbols, ensuring total compatibility between each component. Modbus 24 Vdc 1 2 A line terminator must be fitted to all components with an unused RJ45 connector. 1 RJ45 2 Line terminator 3 ULP symbol Table 140: Available Cables Cable Available Lengths NSX cord for connection of the internal terminal block to the Modbus 4.27 ft. (1.3 m) interface or the FDM121 display using an RJ45 connector. 9.84 ft. (3 m) 3 ULP wiring 0.98 ft. (0.3 m) ULP connection system. 1.97 ft. (0.6 m) ULP cables with RJ45 connectors at each end for the other connections between ULP wiring components 3.28 ft. (1 m) For greater distances, two cables can be interconnected using the RJ45 female/ female connector. Maximum length of 32.8 ft. (10 m) between 2 modules and 98.4 ft. (30 m) in all. 2.56 ft. (2 m) 9.84 ft. (3 m) 16.4 ft. (5 m) 24 Vdc Power Supply Module An external 24 Vdc power supply is required for installations with communication networks, regardless of the type of trip unit. On installations without communication networks, the power supply is available as an option for Micrologic 5/6 to: • • • modify settings when the circuit breaker is open (OFF position) display measurements when the current flowing through the circuit breaker is low maintain the display of the cause of tripping. 24 Vdc 24 Vdc Modbus 24 Vdc Battery Downstream ULP wiring for 24 Vdc supply Power supply, without the Communication function, using the terminal block with a backup battery. Power supply, with the communication function, using the Modbus interface. To determine power requirements of devices, see page 84. 136 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Wiring Micrologic 5 or 6 Without the Communication Function 1 2 Modbus + 24 Vdc 24 Vdc The external 24 Vdc supply is connected through the circuit breaker terminal block. EGX / MPS100 Modbus + 24 Vdc Use of a 24 Vdc battery provides backup power for approximate 3 hours (100 mA) in the event of an interruption in the external supply. Modbus + 24 Vdc Micrologic 5 or 6 With the Communication Function The external 24 Vdc supply is connected through the Modbus interface using a five-pin connector, including two for the power supply. Stacking accessories (see page 81) can be used to supply a number of interfaces by fast clip-on connection. 3 4 FDM121 FDM121 The 24 Vdc power is distributed downstream by the ULP (Universal Logic Plug) communication cables with RJ45 connectors. This system ensures both data transfer and power distribution to the connected modules. 5 0 >11 % Ir .9 4 .9 5 .9 6 .9 7 .9 3 .9 8 .9 2 .9 1 Ir ( x 4 Io ) 5 3 6 2 .5 8 2 10 1 .5 x Is d( J-Frame + BSCM + communicating motor operator 24 Vdc L-Frame + BSCM M icor lo g ic >30 A >30 5 .2 E 5 Recommendations for 24 Vdc Wiring Ir ) J-Frame + MU 6 P-Frame • • • • Do not connect the positive terminal to ground • The 24 Vdc conductors must cross the power cables perpendicularly. If this is difficult or impossible, the plus and minus conductors must be twisted. Do not connect the negative terminal to ground. The maximum length for each conductor (+/-) is 33 ft. (10 m). For connection distances greater than ten metres, the plus and minus conductors of the 24 Vdc supply must be twisted to improve EMC. Masterpact NT 1 Modbus interface module with connection accessory. 2 24 Vdc power supply of Micrologic for Powerpact H-, J-, and L-Frame communication modules. 3 ULP cord. 4 NSX cord. 5 Modbus cable + 24 Vdc part no. 50965 (Schneider Electric) recommended or part no. 7895A (Belden). 6 24 Vdc power supply of Micrologic for PowerPact M-Frame/ Masterpact circuit breakers. 137 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Installation Recommendations Modbus Each PowerPact H-, J-, and L-frame circuit breaker equipped with Micrologic 5/6 and an FDM121 display is connected to the Modbus network using the Modbus com module. Connection of all the circuit breakers and other Modbus devices in the equipment to a Modbus bus is made much easier by using a Modbus RJ45 junction block installed in the equipment. Recommendations for Modbus Wiring: • • • The shielding may be grounded on one end only The conductors must be twisted to improve immunity (EMC) The Modbus conductors must cross the power cables perpendicularly Example. A unit-mount PowerPact L-frame circuit breaker with a Micrologic trip unit can have a maximum Ir setting of: • • 400 A up to 122°F (50 °C) 380 A up to 140°F (60 °C) 138 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Section 11—Wiring Diagrams Unit-Mount Circuit Breakers Micrologic Trip Unit1 Power Remote Operation Vac (+) Vac (+) Z5 Z4 Z2 Z1 NSX cord Z3 Upstream CB 3P or 4P N LA LB LC BPO SDE 81 82 84 BPF Q Z5 Z4 Z3 B2 B4 MX T2 I A2 A4 C2 Z2 Z1 D2 HL + MN T1 auto manu or 0 I Vac (-) A1 L1 C1 D1 V manu SDE Vac (-) Motor Operator NSX cord Z5 Z2 Z4 LA LB LC Z1 N Z3 3P + N Downstream CB I V B4 Q Z2 Z1 HL + - Vac (220/240 V) BSCM T1 Z5 Z4 ENVT Z3 T2 Q auto manu I A1 ENCT H2 T1 0 Vac H1 T2 Schematic of the communicating motor operator . Communicating Motor Operator Continued on next page 139 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Unit-Mount Circuit Breakers (continued) Indication Contacts 104 102 YE 124 WH VT 134 RD WH 131 121 GY CAO1 CAF2 CAF1 91 Open 101 SD Closed RD 94 92 84 Fault 81 12 14 Fault SDE 11 22 24 OF1 21 32 34 OF2 31 OF3 82 Closed Open The diagram is shown with circuits de-energized, relays in normal position, and all devices open, connected, and charged. Terminal connections shown as O must be connected by the customer. Micrologic Trip Unit A or E Remote Operation Communication MN H (WH), L(BL): data or -(BK), +(RD): 24 Vdc power supply MX ZSI (Zone Selective Interlocking) Motor Operator Z1: ZSI OUT SOURCE A4 Opening Order Z2: ZSI OUT A2 Closing Order Z3: ZSI IN SOURCE B4, A1 Power Supply to Motor Operator Z4: ZSI IN ST (short time) L1 Manual Position (manu) Z5: ZSI IN GF (ground fault) B2 Overcurrent Trip Switch Interlocking (mandatory for correct operation) (Z3, Z4, and Z5 for L-frame circuit breaker only) BPO Opening Pushbutton ENCT: External Neutral Current Transformer: -Shielded cable with 1 twisted pair (T1, T2) -Shielding earthed at CT end only Connection L = 12 in. (30 cm) max. -Maximum length of 33 ft. (10 m) -Cable size of 22 AWG -Recommended cable: Belden 9451SB or equivalent BPF Closing Pushbutton ENVT: External Neutral Voltage Tap for Connection to the Neutral using a 3P Circuit Breaker OF2/OF1 Device ON/OFF Auxiliary Switches OF3 Device ON/OFF Auxiliary Switches (L-Frame) Color Code for Auxiliary Wiring SDE Overcurrent Trip Switch (short-circuit, overload, ground fault, earth leakage) RD: Red VI: Violet SD Alarm Switch WH: White GY: Gray CAF2/CAF1 Early-Make Contact (rotary handle only) YE: Yellow OR: Orange CAO1 Early-Break Contact (rotary handle only) BK: Black BL: Blue A/E A/E A/E E Undervoltage Release Shunt Release Communicating Motor Operator B4, A1 Motor Operator Power Supply BSCM Breaker Status and Control Module Indication Contacts GN: Green 140 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Plug-In and Drawout Circuit Breakers Micrologic Trip Unit1 Power Remote Operation Vac (+) Vac (+) Z5 Z4 Z3 Z2 Z1 Upstream CB SDE NSX cord BPO 3P or 4P 81 BPF N LA LB LC 84 B4 B2 C2 OR MN BL RD A2 A2 WH B4 A4 A4 OR D2 BL 22/32 Z2 YE D2 24/34 L H Z1 VT RD BK BL WH + 84 A1 B4 A2 C2 82 84 MX T1 L1 D1/C1 manu Vac (-) 0 I A1 L1 WH GN C1 D1 44 GN Z4 42 RD Z5 BK Z3 41 V or BK auto manu T2 I A1 Q Vac (-) SDE Motor Operator NSX cord Z4 Z5 Z1 LA LB LC Z2 N Z3 3P + N Vac (220/240 V) + - BSCM B4 GN Z2 V Z2 YE I Z1 Q Z1 VT B4 HL Downstream T1 GN Z4 RD Z5 Z4 Z5 auto manu 0 I A4 OR A1 BK Z3 ENCT H2 T1 T2 Z3 ENVT H1 T2 Vac Communicating Motor Operator Continued on next page 141 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Plug-In and Drawout Circuit Breakers (continued) Indication Contacts Carriage Switches 352 354 VT 312 GY YE YE 351 CD 311 101 GY CE Disconnected GY 314 VT 102 104 VT 124 WH WH BK 91 91 121 BK 81 81 RD GY 11 11 131 GY 21 Connected CAO1 CAF2 CAF1 21 Open YE 134 94 RD 92 94 RD 84 84 RD SD SDE Closed Fault 92 GN 82 82 GN 12 14 12 YE 14 VT 22 24 34 34 VT 24 VT OF1 Fault GY 31 OF2 Closed 31 OF3 22 YE 32 32 YE Open The diagram is shown with circuits de-energized, relays in normal position, and all devices open, connected, and charged. Terminal connections shown as Ƒ and O must be connected by the customer. Micrologic Trip Unit A or E Remote Operation Communication MN H (WH), L(BL): data or -(BK), +(RD): 24 Vdc power supply MX ZSI (Zone Selective Interlocking) Motor Operator Z1: ZSI OUT SOURCE A4 Opening Order Z2: ZSI OUT A2 Closing Order Z3: ZSI IN SOURCE B4, A1 Power Supply to Motor Operator Z4: ZSI IN ST (short time) L1 Manual Position (manu) Z5: ZSI IN GF (ground fault) B2 Overcurrent Trip Switch Interlocking (mandatory for correct operation) (Z3, Z4, and Z5 for L-frame circuit breaker only) BPO Opening Pushbutton ENCT: External Neutral Current Transformer: -Shielded cable with 1 twisted pair (T1, T2) -Shielding earthed at CT end only Connection L = 12 in. (30 cm) max. -Maximum length of 33 ft. (10 m) -Cable size of 22 AWG -Recommended cable: Belden 9451SB or equivalent BP Closing Pushbutton ENVT: External Neutral Voltage Tap for Connection to the Neutral using a 3P Circuit Breaker OF2/OF1 Device ON/OFF Auxiliary Switches OF3 Device ON/OFF Auxiliary Switches (L-Frame) Color Code for Auxiliary Wiring SDE Overcurrent Trip Switch (short-circuit, overload, ground fault, earth leakage) RD: Red VI: Violet SD Alarm Switch WH: White GY: Gray CAF2/CAF1 Early-Make Contact (rotary handle only) YE: Yellow OR: Orange CAO1 BK: Black BL: Blue A/E A/E A/E E Undervoltage Release Shunt Release Communicating Motor Operator B4, A1 Motor Operator Power Supply BSCM Breaker Status and Control Module Indication Contacts Early-Break Contact (rotary handle only) GN: Green 142 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Motor Operator NOTE: The diagram is shown with circuits de-energized, relays in normal position, and all devices open, connected, and charged. After tripping initiated by the “Push to trip” button, the undervoltage release (MN), or the shunt release (MX), device can be reset automatically, remotely, or manually. Following tripping due to an electrical fault, reset must be carried out manually. Motor Operator with Automatic Reset Motor Operator with Remote Reset (+) Vac Vac (+) 81 BPO BPF BPF 81 82 84 B2 A4 A2 84 B2 B4 A2 A4 82 SDE Reset B4 SDE BPO Q auto manu I manu 0 I L1 A1 0 L1 auto manu A1 Q manu SDE SDE Vac (-) Vac (-) Motor Operator with Manual Reset A2: Closing Order B4, A1: Motor Operator Power Supply L1: Manual Position (manu) B2: Overcurrent Trip Switch Interlocking (mandatory for correct operation) BPO: Opening Pushbutton BPF: Closing Pushbutton SDE: Fault-Trip Indication Contact (short-circuit, overload, ground fault, earth leakage) Vac (+) BPO SDE 81 82 84 BPF B4 Opening Order B2 Circuit Breaker A4: A2 Q: A4 Symbols Q manu 0 I A1 L1 auto manu SDE Vac (-) 143 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Motor Operator (continued) Symbols Q: B4, A1: BSCM: Communicating Motor Operator Circuit Breaker NSX cord Motor Operator Power Supply Breaker Status and Control Module BSCM B4 HL + - Vac (220/240 V) Q 0 I A1 auto manu Vac Schematic of the communicating motor operator . RSU Screen for Communicating Motor Operator B4 Auto SD SD Manu SDE RSU utility setup screen for the communicating motor operator 220 VAC Open command OF Close command OF Open motor Close motor Enable automatic reset Enable reset even if SDE Reset command Reset motor A1 Single-line diagram of communicating motor operator Opening, closing and reset orders are transmitted through the communication network. The “Enable automatic reset” and “Enable reset even if SDE” parameters must be set using the RSU software using the screen by clicking the blue text. “Auto/Manu” is a switch on the front of the motor operator. Terminal connections shown as O must be connected by the customer. 144 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams SDx Module with Micrologic™ Trip Unit NOTE: The diagram is shown with circuits deenergized, relays in normal position, and all devices open, connected, and charged. Connection Vac (+) 24–415 V STD or output 1 Symbols SD1, SD3: SD2: SD4: SD4 SD2 SD3 SDx Module Power Supply PAL Ir or SDG or output 2 SDx Output 1 (80 mA max.) Output 2 (80 mA max.) Q SD2 SD4 Micrologic 3 SDT — Micrologic 5 SDT or Output 1 PAL Ir or Output 2 Micrologic 6 SDT or Output 1 SDG or Output 2 SD1 Terminal connections shown as O must be connected by the customer. Vac (-) Operation tr at 6 Ir > 105 % Ir > 90 % Ir I PAL Ir SDG SDT Q Circuit breaker trip order I: PAL Ir: SDG: SDT: Q: Circuit breaker reset Charge Current Thermal Overload Pre-Alarm Ground-Fault Signal Thermal-Fault Signal Circuit Breaker 145 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams SDTAM Module with Micrologic M Trip Unit NOTE: The diagram is shown with circuits deenergized, relays in normal position, and all devices open, connected, and charged. Connection Vac (+) 24 to 415 V Manual reset Symbols SD1, SD3: SD2: SD4: SDTAM Module Power Supply Thermal Fault Signal (80 mA max.) SDTAM Contactor Control Output (80 mA max.) 6 8 4 10 2 12 1 14 OFF 15 Auto reset (minutes) Q Micrologic 2 M SD2 SD4 SDT KA1 Terminal connections shown as O must be connected by the customer. KM1 SD4 SD2 SD3 Closing order KA1 SDT Opening order KA1 SD1 KM1 KM1 Vac (-) Operation Class (tr) at 7.2 Ir > 95 % T° 400 ms < 95 % T° I SDT KA1 KM1 Q 400 ms before circuit-breaker tripping order %T° Manual or automatic reset %T° I: SDT: KA1: KM1: Q: Contactor closing order Charge Current Thermal Fault Signal Auxiliary Relay (RBN or RTBT Relay) Motor Contactor Circuit Breaker 146 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Wiring Diagrams Modbus™ Module Detailed connection of the circuit breakers on communication network Modbus G4 EGX / 100 / 300 24 V Power Supply G2 24 V 0 V Rx- Rx+ Tx- Tx+ D1 D0 24 V 0V D0 D1 24 V D1 Modbus Line Termination 0V White Blue D0 24 V 0V White G1 Blue G3 Connection Blue White Modbus Communication Interface Module (PowerPact H-, J-, L-Frame) + - CCM Network A B A' B' White Blue Breaker CD B A' B' CE + - CD B'/Rx+ A'/RxB/Tx+ A/Tx- CT CE Cradle Masterpact NT/NW BCM (PowerPact P/R-Frame) black red E2 0 V E1 24 V 314 blue white yellow brown 812 311 E6 E5 E4 E3 811 black red 911 914 E2 0 V E1 24 V E6 E5 E4 E3 B'/Rx+ A'/RxB/Tx+ A/Tx- blue white yellow brown Blue White CT A BCM (Masterpact NT/NW) 147 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Section 12—Dimensions PowerPact™ H-Frame Circuit Breakers 48996-018-01 Figure 8: 15–150 A Bus Bar PowerPact H-Frame 2P HD/HG Thermal-Magnetic Only Circuit Breaker 6.40 (162,6) 5.66 (143,8) .74 (18,8) .68 (17,3) Ø.20 (5,1) Mounting Hole Ø.20 (5,1) 1.38 (35,0) .30 (7,5) 2.74 (69,7) .44 (11,3 ) 1.20 (30,5) 2.06 (52,4) .37 (9,5) 1.37 (34,8) .24 (6,2) .49 (12,3) SECTION B-B SCALE 1:1 5.01 (127,3) ISOMETRIC VIEW SCALE 1:2 5.20 (132,0) 5.96 (151,3) 17.9° OFF 1.06 (27,0) 21.5° TRIPPED .08 (2,0) SEE DETAIL A 3.44 (87,3) 3.24 2.87 (82,4) (72,9) 1.91 (48,5) 3.74 (95,1) B B .43 (10,8) 19.5° ON .69 (17,5) 4.36 (110,8) Dimensions: 3.69 (93,8) in. (mm) .62 (15,9) DETAIL A SCALE 1:1 148 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions 15–150 A Unit Mount PowerPact H-Frame 2P HD/HG Thermal-Magnetic Only Circuit Breaker 48996-016-01 Figure 9: 6.40 (162,6) 5.66 (143,8) .74 (18,8) Ø.20 (5,1) MOUNTING HOLE .69 (17,5) 1.38 (35,0) 2.74 (69,7) .44 (11,3) 1.20 (30,5) 2.06 (52,4) 1.37 (34,8) 5.01 (127,3) 5.20 (132,0) 5.96 (151,3) ISOMETRIC VIEW SCALE 1:2 17.9° OFF 19.5° ON .43 (10,8) 21.5° TRIPPED 3.44 (87,3) 3.24 (82,4) .08 (2,0) 1.06 (27,0) 2.87 (72,9) 1.91 (48,5) 3.74 (95,1) 4.36 (110,8) .69 (17,5) SEE DETAIL A .62 (15,9) DETAIL A SCALE 1:1 3.69 (93,8) Figure 10: Dimensions: in. (mm) 15–150 A Bus Bar PowerPact H-Frame 3P Circuit Breaker 6.40 (162,6) Ø.20 (5,1) (Mounting Hole) 5.66 (143,8) .74 (18,8) 1.38 (35,0) 1.38 (35,0) Ø .26 (6,7) (1/4-20 Terminal Nut) .29 (7,4) .29 (7,4) 2.06 (52,4) 4.12 (104,7) 1.38 (35,0) .44 (11,3) A 2.04 (51,9) .24 (6,0) 1.37 (34,8) .47 (12,0) SECTION B-B SCALE 1:1 4.99 (126,7) 5.20 (132,1) 5.96 (151,3) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.20 3.44 and MCP (87,4) (30,5) Micrologic 3.49 1.13 Electronic Trip (88,6) (28,8) SCALE 1:2 B 17.9° OFF 19.5° ON .40 (10,3) 1.06 (27,0) 21.5° TRIPPED B .08 (2,0) .73 (18,6) SEE DETAIL A B 3.74 (95,1) 3.24 2.87 (82,4) (72,9) .62 (15,9) 4.36 (110,8) Dimensions: 3.69 (93,8) 1.91 (48,5) in. (mm) DETAIL A SCALE 1:1 149 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 11: 15–150 A Lug-Lug PowerPact H-Frame 3P Circuit Breaker 48996-012-01 6.40 (162,6) Ø .20 (5,1) (Mounting Hole) 5.66 (143,8) .74 (18,8) 1.38 (35,0) 1.38 (35,0) 2.06 (52,4) 4.12 (104,7) .44 (11,3) 1.38 (35,0) 1.37 (34,8) A 2.04 (51,9) Trip Unit Dim. “A” Thermal-Magnetic 1.20 and MCP (30,5) Micrologic 1.13 Electronic Trip (28,8) 4.99 (126,7) 5.20 (132,1) 5.96 (151,3) 17.9° OFF Dim. “B” 3.44 (87,4) 3.49 (88,6) ISOMETRIC VIEW SCALE 1:2 .43 (10,8) 19.5° ON .08 (2,0) 1.06 (27,0) 21.5° TRIPPED .73 (18,6) SEE DETAIL A 3.24 (82,4) B 3.74 1.91 (95,1) (48,5) 2.87 (72,9) 4.36 (110,8) .62 (15,9) Dimensions: 3.69 (93,8) Figure 12: in. (mm) DETAIL A SCALE 1:1 15–150 A Rear Connected PowerPact H-Frame 3P Circuit Breaker 1.24 (31,5) 20 (5,1) (Mounting Hole 1.38 (35,0) 7.40 (188,0) 6.16 (156,5) 2.06 (52,4) 4.12 (104,7) A 2.52 (63,9) 1.37 (34,8) 5.51 (140,0) 5.70 (144,7) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.70 3.44 and MCP (87,4) (43,2) Micrologic 3.49 1.63 Electronic Trip (88,6) (41,5) .40 (10,2) 1.06 (27,0) B 4.36 3.75 (110,8) (95,1) 3.24 (82,4) 2.95 (74,9) 1.87 (47,5) .34 (8,6) 1.66 (42,1) 2.06 (52.4) 1.00 (25,4) 3.44 (87,3) 3.84 (97,4) .71 (18,0) 4.19 (106,4) .94 (23,9) 5.51 (140,0) .24 (6,1) 1.38 (35,0) 1.38 (35,0) 150 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 13: 1.38 (35,0) Motor Operator Detail (PowerPact H-Frame Circuit Breaker) .74 (18,8) Ø .20 (5,1) (Mounting Hole) 6.40 (162,6) 5.66 (143,8) 1.38 (35,0) 1.89 (48,1) 2.16 (55,0) 1.37 (34,8) 5.04 (128,0) 5.71 (145,0) 5.96 (151,3) 4.12 (104,7) 1.38 (35,0) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.24 3.44 and MCP (87,4) (31,5) Micrologic 3.49 1.17 Electronic Trip (88,6) (29,7) .27 (6,8) Ø.20 (5,1) (MOUNTING HOLE) 1.38 (35,0) .74 (18,8) 2.06 (52,4) 4.12 (104,7) .44 (11,3) A Rotary Handle Detail (PowerPact H-Frame Circuit Breaker) 6.40 (162,6) 5.66 (143,8) 1.38 (35,0) 2.06 (52,4) 1.38 (35,0) Figure 14: 1.37 (34,8) .44 (11,3) A 2.02 (51,2) 3.58 (91,0) 5.00 (126,9) 5.27 (133,9) 5.96 (151,3) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.20 3.44 and MCP (30,5) (87,4) Micrologic 1.13 3.49 Electronic Trip (28,8) (88,6) .27 (6,7) 3.58 (91,0) 6.12 (155,4) 7.01 (178,1) 4.00 (101,7) B 3.24 2.87 (82,4) (72,9) 5.63 (143,1) B 4.82 (122,4) 3.24 2.87 (82,4) (72,9) 3.54 (90,2) Dimensions: in. (mm) 151 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact J-Frame Circuit Breakers 48996-022-01 Figure 15: 150–250 A Bus Bar PowerPact J-Frame 3P Circuit Breaker 7.52 (191,0) 6.22 (158,0) 1.30 (33,0) 1.38 (35,0) ØØ.35 .26 (8,9 ) (6.7] (5/16-18 Terminal Nut) Ø .20 (5,1) (Mounting Hole) 2.06 52,4) (1/4-20 Terminal ut) .37 (9,4) 1.38 (35,0) .57 (14,4) 4.12 (104,7) 1.00 (25,5) 1.38 (35,0) .35 (8,9) 1.37 (34,8) .70 (17,7) A 2.60 (66,1) SECTION B-B SCALE 1:1 5.57 (141,5) 5.74 (145,8) 6.52 (165,5) Trip Unit Dim. “A” Thermal-Magnetic 1.76 and MCP (44,7) Micrologic 1.69 Electronic Trip (44,0) Dim. “B” 3.44 (87,4) 3.49 (88,6) ISOMETRIC VIEW SCALE 1:2 B 19.5° ON 17.9° OFF .48 (12,2) 1.05 (26,6) 21.5° TRIPPED B .16 (4,0) SEE DETAIL A 3.24 2.87 (82,4) (72,9) B 4.25 (108,0) Figure 16: .73 (18,6) 5.00 3.74 (127,0) (95,1) in. Dimensions: (mm) 1.91 (48,5) .99 (25,2) DETAIL A SCALE 1:1 150–250 A Lug-Lug PowerPact J-Frame 3P Circuit Breaker 48996-014-01 7.52 (191,0) Ø .20 (5,1) (Mounting Hole) 6.22 (158,0) 1.30 (33,0) 1.38 (35,0) 1.38 (35,0) 2.06 (52,4) 4.12 (104,7) 1.38 (35,0) .86 (21,9) 1.37 (34,8) A 2.60 (66,1) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.76 3.44 and MCP (44,7) (87,4) Micrologic 1.69 3.49 Electronic Trip (43,0) (88,6) 5.57 (141,5) 5.74 (145,8) 6.66 (169,2) ISOMETRIC VIEW SCALE 1:2 19.5° ON 17.9° OFF .53 (13,4) 1.06 (27,0) 21.5° TRIPPED .16 (4,0) SEE DETAIL A B 3.24 (82,4) 3.24 3.74 (82,4) (95,1) 2.87 (72,9) 4.25 (108,0) .73 (18,6) 5.00 (127,0) .99 (25,2) 1.91 (48,5) Dimensions: in. (mm) DETAIL A SCALE 1:1 152 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions 150–250 A Rear Connected PowerPact J-Frame 3P Circuit Breaker 48996-023-01 Figure 17: 8.00 (203,2) Ø .20 (5,1) (Mounting Hole) 6.46 (164,1) 1.54 (39,1) 1.38 (35,0) 2.06 (52,4) 4.12 (104,7) 1.37 (34,8) A 2.84 (72,2) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 2.04 3.44 and MCP (87,4) (51,8) Micrologic 3.49 1.97 Electronic Trip (88,6) (50,1) 5.81 (147,6) 6.02 (152,9) .48 (12,2) 1.04 (26,5) B 3.74 (95,1) 3.24 2.95 (82,4) (74,9) 5.00 (126,9) Ø .34 (8,6) 1.66 (42,1) 1.00 (25,3) 3.44 (87,3) 4.49 (114,2) Figure 18: 1.38 (35,0) .24 (6,0) 5.51 (140,0) 1.24 (31,6) Motor Operator Detail (PowerPact J-Frame Circuit Breaker) 7.52 (191,0) 6.22 (158,0) 1.30 (33,0) .71 (18,0) Figure 19: ISOMETRIC VIEW SCALE 1:2 3.84 (97,5) Dimensions: in. (mm) Rotary Handle Detail (PowerPact J-Frame Circuit Breaker) 7.52 (191,0) 6.22 (158,0) Ø .20 (5,1) (Mounting Hole) 1.38 (35,0) 1.38 (35,0) 1.38 (35,0) 2.06 (52,3) 1.30 (33,0) Ø .20 (5,1) (Mounting Hole) 1.38 (35,0) 1.38 (35,0) 2.06 (52,4) 4.12 (104,7) 1.38 (35,0) 2.06 (52,4) 4.12 (104,7) 1.37 (34,8) .86 (22,0) A 1.38 (35,0) 2.36 (59,9) 2.63 (66,8) 5.50 (139,8) 6.17 (156,7) .86 (21,8) A 1.37 (34,8) 2.68 (68,1) 5.55 (141,0) 5.83 (148,0) 6.66 (169,0) 3.58 (91,0) .27 (6,8) 6.65 (169,0) 3.58 (91,0) .27 (6,7) 7.01 (178,1) 4.01 (101,7) B 3.24 (82,4) 2.87 (72,9) 5.63 (143,1) B 3.24 (82,4) 6.12 4.82 (122,4) (155,4) 2.87 (72,9) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.80 3.44 and MCP (87,4) (45,7) Micrologic 3.49 1.73 Electronic Trip (88,6) (44,0) 4.11 (104,5) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 1.76 3.44 and MCP (87,4) (44,7) Micrologic 3.49 1.69 Electronic Trip (88,6) (43,0) Dimensions: in. (mm) 153 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact H- and J-Frame Plug-In Circuit Breakers Figure 20: 15–250 A PowerPact H- and J-Frame 3P Circuit Breaker Plug-In Base 48996-045-01 2.26 (57,5) 8.07 (205,0) 2.95 (75,0) .24 (6,0) .69 (17,5) 1.38 (35,0) 2.07 (52,5) 4.12 (104,7) 1.37 (34,9) .30 (7,5) 7.48 (190,0) 4.51 (114,5) 2.97 (75,5) 5.92 (150,5) .97 (24,7) 1.56 (39,5) .47 (12,0) 1.89 (48,0) .71 (18,1) .17 (4,3) 2.98 (75,6) 2.64 (67,1) 4.20 (106,6) .46 (11,8) 4.53 (115,1) .71 (18,0) .16 (4,1) 6.17 (156,7) Upper Limit Posiiton .65 (16,6) .33 (8,5) Dimensions: in. (mm) 15–250 A PowerPact H- and J-Frame Plug-In 3P Circuit Breaker 8.00 (203,1) .20 (5,1) Mounting Hole 48996-024-01 .26 (6,6) 1.38 (35,0) 4.84 (123,0) Lower Limit Position 1.32 (33,5) Figure 21: 1.38 (35,0) 4.12 (104,7) A 2.81 (71.4) 5.79 (147,0) 6.00 (151,3) Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic 2.00 4.43 and MCP (112,4) (50,8) Micrologic 4.48 1.93 Electronic Trip (113,6) (49,1) .53 (13,5) 1.06 (27,0) 5.75 4.73 (146,1) 3.93 (120,2) (99,9) B 4.23 (107,4) .33 (8,5) 2.64 (67,1) .47 .71 (12,0) (18,1) 1.32 (33,5) 4.84 (123,0) .16 (4,0) 1.89 (48,0) 2.98 (75,6) 4.86 (123,4) 4.53 (115,1) .71 (18,0) 1.38 (35,0) 1.38 (35,0) Dimensions: in. (mm) 154 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact H- and J-Frame Drawout Circuit Breakers 48996-046-01 Figure 22: 15–250 A PowerPact H- and J-Frame 3P Circuit Breaker Cradle 2.26 (57,5) 7.48 (190,0) 2.95 (75,0) .24 (6,0) .69 (17,5) 2.12 (54,0) 2.93 (74,5) 6.83 (173,5) 7.25 (184,1) 5.63 (142,9) 1.38 (35,0) 2.07 (52,5) 2.60 (66,0) 8.27 (210,0) 1.61 (41,0) .47 (12,0) 4.50 (114,2) 1.89 (48,0) .71 (18,1) .46 (11,8) .16 (4,0) 2.98 (75,6) .71 (18,0) 4.84 (123,0) Lower Limit Position 6.18 (157,0) Upper Limit Position .67 (17,0) Figure 23: 2.64 4.20 (67,1) (106,6) 1.38 (35,0) 4.53 (115,1) .33 (8,5) 1.38 (35,0) Dimensions: in. (mm) 15–250 A PowerPact H- and J-Frame Drawout 3P Circuit Breaker 48996-025-01 8.27 (210,0) 7.25 6.83 (184,1) (173,5) 5.63 (142,9) Handle rotated into unlatched position. 8.00 (203,1) 1.25 (31,8) 5.74 4.73 (145,9) (120,0) 4.50 (114,2) .47 (12,0) .65 (16,5) 6.18 (157,0) .16 (4,0) 1.89 (48,0) 2.64 4.20 (67,1) (106,6) 2.98 (75,6) 4.53 (115,1) .71 (18,0) 1.38 (35,0) 1.38 (35,0) .33 (8,5) Dimensions: in. (mm) 155 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact H- and J-Frame Circuit Breaker Mounting Figure 24: PowerPact H-Frame 2P HD/HG Thermal-Magnetic Only Circuit Breaker 2.74 (69,6) .74 (18,8) 4.92 (125,0) 6.40 (162,6) Dimensions: Mounting Hole Figure 25: in. (mm) PowerPact H- and J-Frame 3P Circuit Breaker .86 (21,8) Cutout for Rear Connections 1.38 (35,1) 1.38 (35,1) 1.30 (33,0) .69 (17,5) .74 (18,8) .30 (7,6) 7.52 (191,0) J-Frame Circuit Breaker 6.40 (162,6) H-Frame Circuit Breaker 4.92 (125,0) 1.38 (35,1) Mounting Hole 4.92 (125,0) 5.51 (140,0) 1.38 (35,0) Mounting Hole 4.12 (104,6) 1.25 Max. (31,8) Without Secondary Disconnect Block .78 (20) Max. With Secondary Disconnect Block Dimensions: in. (mm) 156 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact H- and J-Frame Circuit Breaker Door Cutouts Figure 26: PowerPact H- and J-Frame Circuit Breaker Toggle Handle Door Cutout Trip Unit Dim. “A” Dim. “B” Thermal-Magnetic and MCP Electronic with Micrologic Circuit Breaker Mounting Hole 4.10 (104,1) 4.17 (106,0) 0.41 (10,4) 0.34 (8,6) 1.38 (35,0) 1.38 (35,0) 1.38 (35,0) 4.92 (125,0) 4.92 (125,0) 3.00 (76,2) 5.02 (127,5) 4.92 (125,0) A 1.29 (32,8) 1.44 (36,6) .12 (3,0) 1.14 (29,0) .05 (1,3) B 4.25 (108,0) 2.94 (74,4) 3.30 (83,8) Dimensions: 3.50 (88,9) Figure 27: in. (mm) PowerPact H- and J-Frame Circuit Breaker Toggle Handle With Escutcheon Door Cutout Circuit Breaker Mounting Hole 1.38 (35,0) 4.09 (103,9) 4.92 (125,0) .75 (19,1) .45 (11,4) 3.50 (88,9) 2.28 (57,9) Dimensions: in. (mm) 157 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 28: PowerPact H- and J-Frame Circuit Breaker Fixed Rotary Handle Cutout 5.82 (147,9) With Escutcheon Circuit Breaker Mounting Hole 4.92 2.99 (75,9) (125,0) Without Escutcheon 4.02 (102,9) With Escutcheon 4.48 (113.8) 1.32 (33,5) .79 (20,0) 1.22 (30,9) 3.44 (87,4) 6.18 (157,0) .25 (6,4) 3.81 (96,8) Without Escutcheon 4.82 122,4) Figure 29: .13 (3,3) 1.38 (35,0) Dimensions: in. (mm) PowerPact H- and J-Frame Circuit Breaker Door Mounted Rotary Handle Cutout 1.38 (35,0) Circuit Breaker Mounting Hole .16 (4,2) 4.92 (125,0) 2.0 (50) 2.813 (71,5) 2.8 (72) 1.05 (26,7) Min. 7.3 (185) Max. 23.5 (600) Dimensions: in. (mm) 158 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 30: PowerPact H- and J-Frame Circuit Breaker Motor Operator Cutout 5.79 (147,1) With Escutcheon 4.92 2.99 (125,0) (75,9) Without Escutcheon 4.09 (103,9) With Escutcheon 4.48 (113,8) 1.27 (32,3) 6.18 (157,0) .13 (3,3) 5.63 (143.1) 7.01 (178,1) 1.22 (30,9) .25 (6,4) 1.38 (35,0) 3.81 (96,8) Without Escutcheon Dimensions: in. (mm) 159 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact L-Frame Circuit Breakers Figure 31: PowerPact L-Frame Fixed Mounted Electronic Trip Circuit Breaker A A2 A3 X X X A2 A A3 push to trip C1 C2 C3 B Z B2 Y A2 = Short lug pack AL400L61K3 CU400L61K3 AL600LF52K3 CU600LF5283 Y A = Medium lug pack AL400L61K4 CU400L61K4 AL600LS52K3 AL600LS52K4 CU600LS52K3 CU600LS52K4 A3 = Long lug pack Compression Lug Kits A A2 A3 B B1 B2 C1 C2 C3 inch 6.69 5.65 7.87 2.76 5.51 7.28 3.76 4.33 6.61 mm 170 143.5 200 70 140 185 105 110 168 Figure 32: PowerPact L-Frame Circuit Breaker Mounting Mounting on Backplate K1 3P B B1 K1 Mounting on Rails K1 4P K1 K1 K2 K1 K 3P 4P K1 K V K K G1 G1 X G5 X X X G G K2 T G4 ØT Y Y Ø T4 Y Y G G1 G4 G5 K1 K1 K2 T T42 U3 inch 3.93 7.87 4.46 8.93 0.88 1.77 3.54 0.23 1.25 1.38 mm 100 200 113.5 227 22.5 45 90 6 32 35 1 For 2 pole circuit breaker, the middle holes are not required. 2 For rear connected circuit breakers only. 3 V is ≤ 78 in. (20 mm) on C-frame circuit breakers with secondary disconnecting blocks. 160 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 33: Front Panel Cutouts for PowerPact L-Frame Fixed or Plug-In Circuit Breakers Cutout A Cutout C Cutout B A X C1 X X C3 X C Y R2 R4(3P) R5(4P) R1 Z P5 P6 Figure 34: Y Y R h C2 C2 B/C C3 C C1 C2 C3 P5 P6 R R1 R2 R4 R5 Δ inch 1.63 4.56 3.64 7.24 4.21 4.40 1.24 2.48 2.81 5.62 7.40 3.93 + (5 x h) mm 41.5 116 92.5 184 107 112 31.5 63 71.5 143 188 100 + (5 x h) PowerPact L-Frame Circuit Breaker Front Panel Cutouts for Toggle Boot and Escutcheon Door Hinge Point With Escutcheon With Toggle Boot X C21 C7 X C20 X h C6 Y R12 R13 Y R6 R7 P6 Z C6 C7 C20 C21 P6 R6 R7 R12 R13 Δ inch 2.2 6 1.83 5.00 4.40 3.5 7 2.48 4.96 3.93 + (5 x h) mm 56.5 155 46.5 126 112 90 180 63 126 100 + (5 x h) 161 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact L-Frame Plug-In and Drawout Mounting Figure 35: PowerPact L-Frame Plug-In Circuit Breaker (On Base) ( ) Z M * 3P 4P K1 K1 K1 G11 H17 X X X G10 H16 (*) Y L1 P7 P8 P9 P4 L L2 A = Terminal shields M = Through front panel G10 G11 H16 H17 inch 5.90 11.8 6.20 12.40 1.77 2.75 mm 150 300 157.5 315 45 70 Figure 36: Y L K1 L L1 L2 P4 P7 P8 P9 5.51 7.28 6.61 1.06 1.77 3.93 140 185 168 27 45 100 PowerPact L-Frame Drawout Circuit Breaker (on Cradle) M 3P 4P H19 X X X H18 ( ) * Y Y Z P7 P8 P9 ( P2 P4 L6 L9 L10 L6 L7 L8 P12 M = Through front panel H18 H19 L6 L7 L8 L10 P2 P4 P7 P8 P9 P12 L9 inch 5.51 11.02 4.33 8.66 98.46 11.61 4.33 6.61 1.06 1.77 3.93 1.25 10.43 mm 140 280 110 220 250 295 110 168 27 45 100 32 265 162 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 37: PowerPact L-Frame Circuit Breaker Mounting Through a Backplate Cradle Plug-In Base K1 K 3P K X K G13 X X G12 G10 Y Y K5 T K5 K6 X G12 G10 Y K2 4P G11 G13 G11 T K1 K 3P K2 4P Y K11 K11 K12 K7 K13 G10 G11 G12 G13 K K1 K2 K5 K6 K7 K11 K12 K13 inch 5.90 11.8 5.39 10.7 0.88 1.77 3.54 2.81 2.81 7.4 7.40 3.60 8.98 mm 150 300 137 274 22.5 45 90 71.5 143 188 91.5 183 228 Figure 38: PowerPact L-Frame Circuit Breaker Mounting on Rails (Plug-In Base or Cradle) 3P 4P K22 K21 K20 U K20 X X G21 G20 Y Y T G20 G21 K20 K21 K22 T inch 2.95 5.90 8.97 1.96 5.71 0.24 mm 75 150 50 100 145 6 Figure 39: PowerPact L-Frame Circuit Breaker Front-Panel Cutouts Drawout with Extended Front-Panel Escutcheons Plug-in Mounting X C11 X C17 Y R8 P44 R9 Z C11 C17 P44 R8 R9 inch 6.10 2.22 5.78 3.54 7.08 mm 155 56.5 147 90 180 163 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact L-Frame Circuit Breaker Handles and Handle Operators Figure 40: PowerPact L-Frame Circuit Breaker Motor Operators A17 A15 A14 X X X A16 B8 B8 C4 C5/C6 B9 B9 B B B2 B1 Y Y Z C5: without keylock C6: with keylock A14 A15 A16 A17 B B1 B2 B8 B9 inch 1.57 4.84 2.05 3.94 2.76 5.51 7.28 2.42 4.84 mm 40 123 52 100 70 140 185 61.5 123 Figure 41: C4 C5 C6 D1 8.46 10.08 10.16 3.94 215 256 258 100 PowerPact L-Frame Circuit Breaker Motor Operator Front-Panel Cutouts X h P45 Z C22 C23 P45 R14 R15 Δ inch 1.63 4.96 8.54 2.53 5.08 3.93 + (5 x h) mm 41.5 126 217 64.5 129 100 + (5 x h) 164 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 42: PowerPact L-Frame Circuit Breaker Cable-Operating Handles 4.31 (184) 7.996 (203) 0.31 (8) 11.32 (287) 4.29 (109) 1.06 (27) 7.01 (178) 10.38 (264) 9.38 (238) 13.5 (34.3) Dimensions: Figure 43: in. (mm) PowerPact L-Frame Circuit Breaker Rotary-Operating Handles B10 60° A15 I X 60° A14 X X O A18 B8 B8 B9 B9 C7 B B C8/C9 B2 B1 Z Y Y C8: without keylock C9: with keylock A14 A15 A18 B B1 B2 B8 B9 B10 C7 C8 C9 D1 inch 1.57 4.84 0.97 2.76 5.51 7.28 2.42 4.84 0.20 5.71 7.05 7.40 3.94 mm 40 123 24.6 70 140 185 61.5 123 5 145 179 188 100 165 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 44: PowerPact L-Frame Motor-Control Center Circuit Breaker Direct Rotary-Operating Handle Front-Panel Cutout Operating Handle A18 S3 A20 X X X A19 S4 S5 max. P1 S2 S1 B10 B11 B12 Z Y Y A18 A19 A20 B10 B11 B12 P1 S1 S2 S3 S4 S5 inch 0.97 3.27 6.30 0.20 3.35 6.30 5.87 5.71 2.95 5.71 2.01 0.04–0.12 mm 24.6 83 160 5 85 160 149 145 75 145 51 1–3 Figure 45: PowerPact L-Frame Circuit Breaker Extended Rotary Handle Mounting M M N M Fixed or Plug-In Mounted Drawout Mounting N N 0.39 (10) X X 1.06 (27) 1.77 (45) 1.06 (27) 1.77 (45) D1 1.85 (47) R1 Z D1 1.85 (47) R2 Z 2.95 (75) 60° Ø 45° A18 A18 X X 1.42 (36) 60° 2Ø 1.48 (37.5) 2.83 (72) 0.17 (4.2) B10 B10 1.48 (37.5) 1.97 (50) Y 2.95 (75) Dimensions: in. (mm) Y R1 min R1 max R2 min R2 max A18 B10 D1 inch 7.68 23.62 10.71 23.62 0.97 0.20 3.94 mm 195 600 272 600 24.6 5 100 166 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions L-Frame Circuit Breaker Front Accessories Figure 46: PowerPact L-Frame Circuit Breaker Extended Escutcheons For toggle IP43 toggle cover X A4 X A5 B2 Y S6 B3 Y A4 A5 B2 B3 C inch 4.82 5.43 4.82 5.43 2.36 1.38 mm 122.5 134 122.5 134 60 35 Figure 47: C S6 PowerPact L-Frame Circuit Breaker Front-Panel Escutcheons For Extended Escutcheon, Motor Operator Module or Rotary Handle 06153175 For Toggle A1 M6 M3 M2 D1 A2 D2 A1 A2 D1 D2 M2 M3 M6 M7 inch 4.01 7.44 0.13 0.25 6.10 5.59 6.45 5.94 mm 102 189 3.5 6.5 115 142 164 151 M7 D1 D2 167 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact L-Frame Circuit Breaker Interlocking Systems Figure 48: PowerPact L-Frame Circuit Breaker Interlocking Systems with Rotary-Operating Handles F J D N X M C Y H H B A F L K G Z Figure 49: A B C D F G H J K L M N inch 16.38 4.53 3.94 7.87 8.27 6.18 0.20 0.97 15.20 3.94 6.89 2.93 mm 416 115 100 200 210 157 5 24.6 386 100 175 74.5 PowerPact L-Frame Circuit Breaker Interlocking Systems with Toggle Handles X X C3 C2 R2 Y L16 L17 P5 Z Y Y R19 R2 L C2 C3 L L16 L17 R2 R19 P5 inch 3.64 7.24 2.75 7.28 12.79 2.81 7.28 4.21 mm 92.5 184 70 185 325 71.5 185 107 168 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions PowerPact L-Frame Circuit Breaker Connectors Figure 50: PowerPact L-Frame Circuit Breaker Fixed-Mounted Connections G4 P13 G5 K1 P13 inch 4.46 8.93 1.77 1.02 mm 113.5 227 45 526 G4 X X G5 Y K1 Z Figure 51: K1 PowerPact L-Frame Circuit Breaker Front Connections Bus Bar Connection Front Connections M10 Screws Z 0.55 (14) 4.46 (113.5) X Z Z 0.55 (14) 1.83 (46.5) 4.46 (113.5) X 4.46 (113.5) X Dimensions: Figure 52: in. (mm) PowerPact L-Frame Circuit Breaker Rear Connections 0.59 (15) 1.18 (30) 0.33 (13) 1.99 (50)(*) 4.52 (115)(**) 0.55 (14) 0.91 (23.2) 4.46 (113.5) Z X 0.31 (8) (*) Short RC : 1.96 (50) (**) Long RC : 4.52 (115) Dimensions: in. (mm) 169 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Dimensions Figure 53: PowerPact L-Frame Circuit Breaker Plug-In or Drawout Mounting Connections 3P 4P K1 K1 K1 K1 K1 X X X Z Y Y K1 inch 1.77 mm 45 Figure 54: PowerPact L-Frame Circuit Breaker Rear Connections Fitted at Lower Limit P22 P23 Z E G33 P22 P23 inch 0.23 4.09 4.50–7.14 3.93–6.57 mm 6 104 114.5–181.5 100–167 E G33 X Figure 55: PowerPact L-Frame Circuit Breaker Rear Connections Fitted at Upper Limit P22 P23 E G35 P22 P23 inch 0.23 5.07 4.50–7.14 3.93–6.57 mm 6 129 114.5–181.5 100–167 Z E G35 X 170 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Section 13—Trip Curves PowerPact H- and J-Frame Thermal-Magnetic Trip Circuit Breakers Figure 56: H-Frame 15–35 A (HD, HG, HJ, and HL) Thermal-Magnetic Trip 80 90 100 600 500 500 400 400 300 300 200 150 150 150 200 8000 9000 10000 700 600 7000 1000 900 800 700 All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. 6000 1000 900 800 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. 5000 1500 Number of Poles 600 4000 2000 1500 Maximum AC Voltage 15–35 3000 2000 Continuous Ampere Rating HD, HG, HJ, HL 2000 3000 1500 3000 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix 800 900 1000 4000 700 5000 4000 600 6000 5000 500 6000 HD, HG, HJ, HL MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-1 400 7000 300 10000 9000 8000 7000 200 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 MULTIPLES OF RATED CURRENT 10000 9000 8000 100 90 80 100 90 80 70 60 50 50 40 40 30 30 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 .6 .6 .5 .5 TIME IN SECONDS TIME IN SECONDS 70 MAXIMUM SINGLE-POLE TRIP TIMES AT 25°C BASED ON NEMA AB-4 2003 60 .4 .4 30 A, 35 A .3 .3 25 A .2 .2 20 A .15 .15 15 A .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 MAXIMUM CLEARING TIME (AT 50 Hz) (AT 60 Hz) .03 .03 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 8000 9000 10000 7000 5000 6000 4000 3000 2000 1500 800 900 1000 700 600 500 400 300 200 150 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .005 .6 .006 .005 .5 .006 TM MULTIPLES OF RATED CURRENT 35 25 30 20 15 Curve No. 0050TC0401 June 2004 Drawing No. 48095-050-01 © 2004 Schneider Electric All Rights Reserved 171 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 57: H-Frame 40–60 A (HD, HG, HJ, and HL) Thermal-Magnetic Trip 80 90 100 700 600 600 500 500 400 400 300 300 200 150 150 150 200 8000 9000 10000 1000 900 800 700 All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. 7000 1000 900 800 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. 6000 1500 Number of Poles 600 5000 2000 1500 Maximum AC Voltage 40–60 4000 2000 Continuous Ampere Rating HD, HG, HJ, HL 3000 3000 2000 3000 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix 1500 4000 800 900 1000 5000 4000 700 6000 5000 600 6000 HD, HG, HJ, HL MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-2 500 7000 400 7000 300 10000 9000 8000 200 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 MULTIPLES OF RATED CURRENT 10000 9000 8000 100 90 80 100 90 80 70 70 MAXIMUM SINGLE-POLE TRIP TIMES AT 25°C BASED ON NEMA AB-4 2003 60 50 50 40 40 30 30 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 .6 .6 .5 .5 TIME IN SECONDS TIME IN SECONDS 60 .4 .4 50 A .3 .3 45 A .2 .2 40 A .15 .15 60 A .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 MAXIMUM CLEARING TIME (AT 60 Hz) (AT 50 Hz) .03 .03 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 400 300 200 150 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .005 .6 .006 .005 .5 .006 TM MULTIPLES OF RATED CURRENT 60 45 50 40 Curve No. 0050TC0402 June 2004 Drawing No. 48095-050-02 © 2004 Schneider Electric All Rights Reserved 172 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 58: H-Frame 70–100 A (HD, HG, HJ, and HL) Thermal-Magnetic Trip 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 MULTIPLES OF RATED CURRENT 10000 9000 8000 10000 9000 8000 7000 7000 6000 6000 5000 5000 4000 4000 HD, HG, HJ, HL MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-3 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum AC Voltage Number of Poles HD, HG, HJ, HL 70–100 600 2, 3 3000 3000 2000 2000 1500 1500 1000 900 800 1000 900 800 700 700 600 600 500 500 400 400 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. 300 300 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 400 100 90 80 100 90 80 70 70 60 60 50 50 40 40 30 30 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 TIME IN SECONDS TIME IN SECONDS 300 150 150 200 150 200 MAXIMUM SINGLE-POLE TRIP TIMES AT 25°C BASED ON NEMA AB-4 2003 200 .6 .6 .5 .5 90 A, 100 A .4 .4 .3 70 A, 80 A .3 .2 .2 .15 .15 .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 MAXIMUM CLEARING TIME (AT 50 Hz) (AT 60 Hz) .03 .03 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 .006 .006 .005 8000 9000 10000 7000 5000 6000 4000 3000 2000 1500 800 900 1000 700 600 500 400 300 200 150 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 .005 TM MULTIPLES OF RATED CURRENT 90 70 100 80 Curve No. 0050TC0403 June 2004 Drawing No. 48095-050-03 © 2004 Schneider Electric All Rights Reserved 173 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 59: H-Frame 110–150 A (HD, HG, HJ, and HL) Thermal-Magnetic Trip 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 MULTIPLES OF RATED CURRENT 10000 9000 8000 10000 9000 8000 7000 7000 6000 6000 5000 5000 4000 4000 HD, HG, HJ, HL MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-4 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum AC Voltage Number of Poles HD, HG, HJ, HL 110–150 600 2, 3 3000 3000 2000 2000 1500 1500 1000 900 800 1000 900 800 700 700 600 600 500 500 400 400 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. 300 300 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 100 90 80 100 90 80 70 70 60 60 50 50 40 40 30 30 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 TIME IN SECONDS TIME IN SECONDS 400 150 300 200 150 150 200 200 MAXIMUM SINGLE-POLE TRIP TIMES AT 25°C BASED ON NEMA AB-4 2003 .6 .6 .5 .5 150 A .4 .4 125 A .3 .3 110 A .2 .2 .15 .15 .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 MAXIMUM CLEARING TIME (AT 50 Hz) (AT 60 Hz) .03 .03 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 .006 .006 .005 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 400 300 200 150 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 .005 TM MULTIPLES OF RATED CURRENT 150 110 125 Curve No. 0050TC0404 June 2004 Drawing No. 48095-050-04 © 2004 Schneider Electric All Rights Reserved 174 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 J-Frame 150–250 A (JD, JG, JJ, JL, and JR) Thermal-Magnetic Trip .8 .9 1 .7 .6 .5 Figure 60: 10000 9000 8000 10000 9000 8000 7000 7000 6000 6000 5000 5000 4000 4000 3000 3000 2000 2000 1500 1500 1000 900 800 1000 900 800 700 700 600 600 500 500 JD, JG, JJ, JL, JR MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-5 CIRCUIT BREAKER INFORMATION Continuous Ampere Rating Maximum AC Voltage Number of Poles JD, JG, JJ, JL, JR 150–250 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. 400 400 MAXIMUM SINGLE-POLE TRIP TIMES AT 25°C BASED ON NEMA AB-4 2003 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 150 400 200 150 150 200 300 300 200 300 100 90 80 100 90 80 70 70 60 60 50 50 40 40 30 30 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 LIMITS LOW SETTING TIME IN SECONDS TIME IN SECONDS Circuit Breaker Prefix 1 .9 .8 LIMITS HIGH SETTING .7 .7 .6 .6 .5 .5 .4 .4 .3 .3 .2 .2 .15 .15 MAGNETIC TRIP ADJUSTMENT RANGE .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 MAXIMUM CLEARING TIME (AT 50 Hz) (AT 60 Hz) .03 .03 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 .006 .006 .005 ™ © 2012 Schneider Electric All Rights Reserved 250 225 200 175 150 MULTIPLES OF RATED CURRENT 8000 9000 10000 7000 6000 5000 4000 3000 2000 1500 800 900 1000 700 600 500 400 300 200 150 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 .005 TM Curve No. 0050TC0405 August 2012 Drawing No. 48095-050-05 Rev. 01 175 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 61: J-Frame 100 A (JG) 500 Vdc Thermal-Magnetic 500 Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-14 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 100 600 3 in series This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0914 September 2009 Drawing No. 48095-050-14 © 2009 Schneider Electric All Rights Reserved 176 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 62: J-Frame 125 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-15 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 125 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0915 September 2009 Drawing No. 48095-050-15 © 2009 Schneider Electric All Rights Reserved 177 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 63: J-Frame 150 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-16 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 150 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0916 September 2009 Drawing No. 48095-050-16 © 2009 Schneider Electric All Rights Reserved 178 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 64: J-Frame 175 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-17 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 175 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0917 September 2009 Drawing No. 48095-050-17 © 2009 Schneider Electric All Rights Reserved 179 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 65: J-Frame 200 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-18 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 200 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0918 September 2009 Drawing No. 48095-050-18 © 2009 Schneider Electric All Rights Reserved 180 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 66: J-Frame 225 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-19 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 225 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0919 September 2009 Drawing No. 48095-050-19 © 2009 Schneider Electric All Rights Reserved 181 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 67: J-Frame 250 A (JG) 500 Vdc Thermal-Magnetic Trip 500 Vdc JG MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 50-20 CIRCUIT BREAKER INFORMATION Circuit Breaker Prefix Continuous Ampere Rating Maximum DC Voltage Number of Poles JG 250 600 2, 3 This curve is to be used for application and coordination purposes only. The EZ-AMP overlay feature at the bottom of the page should be used during coordination studies. All time/current characteristic curve data is based on 40°C ambient cold start. Terminations are made with conductors of appropriate length and ratings. TM Curve No. 0050TC0920 September 2009 Drawing No. 48095-050-20 © 2009 Schneider Electric All Rights Reserved 182 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 68: H-Frame 150 A Typical Peak Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7+²)5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 ³$ 3($./(77+528*+&855(17OS Ip Typical* Peak Let-Through Current (Amperes x 103) *Based on typical values obtained throughout the circuit breaker development and UL test programs. 60 Maximum Available Peak Current at 15% Power Factor 50 40 R 480 V Maximum Available Peak Current at 25% Power Factor 30 R 600 V L L J R 20 G J J 240 V L G G D D D 10 9 8 7 6 10 20 30 40 50 60 70 80 90 100 200 Available Short Circuit Current (RMS Symmetrical Amperes x 103) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 183 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 69: H-Frame 150 A Typical I2t Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7+²)5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 ³$ /(77+528*+&855(17OW I2t Typical* Let-Through I2t (Amperes2 Seconds x 106) *Based on typical values obtained throughout the circuit breaker development and UL test programs. 2 1 .9 R L 600 V .8 L .7 J .6 R 480 V J G G D .5 J D L R 240 V G .4 D .3 .2 10 20 30 40 50 60 70 80 90 100 200 Available Short Circuit Current (RMS Symmetrical Amperes x 103) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 184 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 70: J-Frame 250 A Typical Peak Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7-²)5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 ³$ 3($./(77+528*+&855(17OS Ip Typical* Peak Let-Through Current (Amperes x 103) *Based on typical values obtained throughout the circuit breaker development and UL test programs. 60 Maximum Available Peak Current at 15% Power Factor 50 40 R 480 V Maximum Available Peak Current at 25% Power Factor 30 R 600 V L L J J 20 J G L R 240 V G G D D D 10 9 8 7 6 10 20 30 40 50 60 70 80 90 100 200 Available Short Circuit Current (RMS Symmetrical Amperes x 103) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 185 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 71: J-Frame 250 A Typical I2t Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7-²)5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 ³$ /(77+528*+&855(17OW I2t Typical* Let-Through I2t (Amperes2 Seconds x 106) *Based on typical values obtained throughout the circuit breaker development and UL test programs. 2 R L 600 V 1 L J .9 .8 R 480 V J G G .7 .6 D D J .5 L R 240 V G .4 D .3 .2 10 20 30 40 50 60 70 80 90 100 200 Available Short Circuit Current (RMS Symmetrical Amperes x 103) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 186 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 72: H- and J-Frame Motor Circuit Protector POWERPACT H/J FRAME MOTOR CIRCUIT PROTECTOR WITH MANUAL SETTINGS CHARACTERISTIC TRIP CURVE NO. 045-1 The time-current curve information represents the typical response and is to be used for application and coordination purposes only. Curves apply from -30C to +60C ambient temperature. Notes: • The MCP is an instantaneous only breaker that detects the peaks of the current. In order to trip within the specified time-current levels, consecutive peaks of the current must exceed the selected setting’s threshold. • Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. • The time-current curve represents single-phase to three-phase fault currents. # # # # 8 24 46 86 155 11 27 51 91 163 14 29 56 97 172 8x 8x 8x 8x 8x 9x 9x 9x 9x 9x 10x 10x 10x 10x 10x 17 32 63 110 181 20 36 71 119 210 25 42 80 130 217 12x 12x 12x 12x 12x 13x 13x 13x 13x 13x K# # # # # # # # K : &=:$&:$&,?'=Q;Z?;&: <= ::;& ;& :$> =, $&'$+,::;&<= 1/2-1 Cycle Maximum Clearing Time 670 1150 2150 3450 3600 Nominal Fault Current Level 11x 11x 11x 11x 11x M71 M72 M73 M74 M75 IM Adjustment Suffix # 325 546 1040 1690 2500 Highest Setting 12 112 240 464 912 Lowest Setting M71 M72 M73 M74 M75 @, $>? +, 6 21 41 79 145 Suffix # # 3 17 35 71 137 # ,, FLA Adjustments 1.5 14 30 58 114 M71 M72 M73 M74 M75 MOTOR CIRCUIT PROTECTOR INFORMATION Suffix # !" !" !" !" TM Curve No. 0045TC0601 August 2006 Drawing No. 48095-045-01 © 2006 Schneider Electric all rights reserved 187 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 73: H-Frame UL Listed Current-Limiting Circuit Breaker 7+(50$/0$*1(7,&02/'('&$6(&,5&8,7%5($.(56 +² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 +$)5$0($7$1'9 +-+/$1'+5³$ 3($./(77+528*+&855(17OS Ip Maximum* Peak Let-Through Current (Amperes) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. 60000 50000 480 V 3Ø 40000 Maximum Available Peak Current at 15% Power Factor 600 V 3Ø 30000 240 V 3Ø 20000 10000 9000 8000 7000 200000 150000 90000 100000 80000 70000 60000 50000 40000 30000 20000 9000 10000 8000 7000 6000 5000 6000 Availability (RMS Symmetrical Amperes) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 188 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 74: H-Frame UL Listed Current-Limiting Circuit Breaker 7+(50$/0$*1(7,&02/'('&$6(&,5&8,7%5($.(56 +² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 +$)5$0($7$1'9 +-+/$1'+5³$ /(77+528*+&855(17OW I2t Maximum* Let-Through I2t (Amperes2 Seconds x 106) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. 2.0 600 V 3Ø 1.0 480 V 3Ø .9 .8 .7 .6 240 V 3Ø .5 .4 .3 200000 150000 90000 100000 80000 70000 60000 50000 40000 30000 20000 9000 10000 8000 7000 6000 5000 .2 Availability (RMS Symmetrical Amperes) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 189 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 75: J-Frame UL Listed Current -Limiting Circuit Breaker 7+(50$/0$*1(7,&02/'('&$6(&,5&8,7%5($.(56 -² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 -$)5$0($7$1'9 ---/$1'-5³$ 3($./(77+528*+&855(17OS Ip Maximum* Peak Let-Through Current (Amperes) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. 60000 50000 480 V 3Ø 40000 Maximum Available Peak Current at 15% Power Factor 600 V 3Ø 30000 240 V 3Ø 20000 10000 9000 8000 7000 200000 150000 100000 90000 80000 70000 60000 50000 40000 30000 20000 9000 10000 8000 7000 6000 5000 6000 Availability (RMS Symmetrical Amperes) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 190 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 76: J-Frame UL Listed Current-Limiting Circuit Breaker 7+(50$/0$*1(7,&02/'('&$6(&,5&8,7%5($.(56 -² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 -$)5$0($7$1'9 ---/$1'-5³$ /(77+528*+&855(17OW I2t Maximum* Let-Through I2t (Amperes2 Seconds x 106) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. 2.0 600 V 3Ø 480 V 3Ø 1.0 .9 .8 .7 240 V 3Ø .6 .5 .4 .3 200000 150000 90000 100000 80000 70000 60000 50000 40000 30000 20000 9000 10000 8000 7000 6000 5000 .2 Availability (RMS Symmetrical Amperes) 'UDZLQJ1R $SULO 5HY 6FKQHLGHU(OHFWULFDOOULJKWVUHVHUYHG 191 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 77: Ground Fault Module GFM150HD Trip Curve Pickup Levels ±10% Time in Seconds 09603011 Curve 980-1 Circuit Breaker Will Instantaneous Trip Above 1200 A 4 3 2 1 Delay Band Current in Amperes Figure 78: Ground Fault Module GFM250JD Trip Curve Pickup Levels ±10% Time in Seconds 09603012 Curve 980-2 Circuit Breaker Will Instantaneous Trip Above 2500 A 4 3 2 1 Delay Band Current in Amperes 192 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 79: Earth Leakage Module Trip Curve .4 10000 9000 8000 7000 7000 6000 6000 5000 5000 4000 4000 Catalog Number Circuit Breaker 3000 3000 ELM150HD ELM250JD PowerPact H-Frame PowerPact J-Frame 2000 2000 1500 1500 1000 900 800 1000 900 800 700 700 600 600 500 500 400 400 300 300 200 200 150 150 CB Amps CB Voltage 15–150 150–250 Number Of Poles 600 600 3 3 Total clearing times shown include the response times of the ELM, the circuit breaker shunt trip, the circuit breaker opening, and the extinction of the current. Curves apply from -30°C to +60°C ambient temperature. Refer also to the circuit breaker trip curves for PowerPact H- and J-Frame Circuit Breakers. 80 90 100 70 60 50 40 30 20 15 8 9 10 7 5 4 3 2 1.5 .8 .9 1 .7 Note: Trip curves define the performance under normal conditions. Add 0.030 seconds for closing breaker/module on an existing fault. 100 90 80 100 90 80 70 70 60 60 50 50 40 40 30 30 20 20 3.0 A 1.0 A 300 MA 100 MA 30 MA 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 TIME IN SECONDS TIME IN SECONDS EARTH LEAKAGE MODULES (ELM) FOR POWERPACT TM H AND J-FRAME MOLDED CASE CIRCUIT BREAKERS CHARACTERISTIC TRIP CURVE NO. 961-1 .6 .5 10000 9000 8000 6 .3 .2 .15 .08 .09 .1 .07 .06 .05 .04 .03 .02 .015 .008 .009 .01 .007 .006 .005 TRIP THRESHOLD CURRENT (AMPERES) .6 .6 .5 .5 0.50 SECONDS .4 .4 .3 .3 .2 .2 .15 .15 .1 .09 .08 .1 .09 .08 0.10 SECONDS .07 .07 .06 .06 0.06 SECONDS .05 .05 .04 .04 .03 .03 INSTANTANEOUS 1 CYCLE (50 Hz) .02 1 CYCLE (60 Hz) .015 .02 .015 1/2 .01 .009 .008 CYCLE (50 Hz) 1/2 CYCLE (60 Hz) .007 .01 .009 .008 .007 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 .4 .3 .2 .15 .08 .09 .1 .07 .06 .05 .04 .03 .02 .015 .008 .009 .01 .007 .005 .006 .006 .005 .005 .006 TRIP THRESHOLD CURRENT (AMPERES) 193 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves PowerPact H- and J-Frame Thermal-Magnetic Trip MCP Instantaneous Trip Points Table 141: M71 Instantaneous Trip Points Automatic Setting (A) Motor Type FLA 1 2 NEMA A, B, C, D B, E IEC N H 1.5 12 16.5 9 12 13.5 15 3 24 33 18 24 27 30 6 48 66 36 48 54 8 64 88 48 64 72 6x 10x 11x 12x 13x 16.5 18 19.5 33 36 39 60 66 72 78 80 88 96 104 88 121 66 88 99 110 121 132 143 14 112 154 84 112 126 140 154 168 182 17 136 187 102 136 153 170 187 204 221 20 160 220 120 160 180 200 220 240 260 25 200 275 150 200 225 250 275 300 325 1300% 1700% 1300% 11x 12x 13x — M72 Instantaneous Trip Points Motor Type Manual Adjustment (A)1 Im Setting 1 2 NEMA A, B, C, D B, E IEC N H 14 112 154 84 112 126 140 154 168 182 17 136 187 102 136 153 170 187 204 221 21 168 231 126 168 189 210 231 252 273 24 192 264 144 192 216 240 264 288 312 27 216 297 162 216 243 270 297 324 351 29 232 319 174 232 261 290 319 348 377 32 256 352 192 256 288 320 352 384 416 36 288 396 216 288 324 360 396 432 468 42 336 462 252 336 378 420 462 504 546 1300% 1700% 1300% Dampening for motor in-rush (% FLA) 1 9x (FLA) x (Im) Automatic Setting (A)1 FLA 8x 11 Dampening for motor in-rush (% FLA) Table 142: Manual Adjustment (A) Im Setting 6x 8x 9x 10x (FLA) x (Im) — ± 5% of nominal amperage shown above. 194 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Table 143: M73 Instantaneous Trip Points Automatic Setting (A)1 Motor Type FLA Im Setting 1 2 NEMA A, B, C, D B, E 11x 12x 13x IEC N H 30 240 330 180 240 270 35 280 385 210 280 315 300 330 360 390 350 385 420 41 328 451 246 328 455 369 410 451 492 46 368 506 276 533 368 414 460 506 552 51 408 561 598 306 408 459 510 561 612 56 448 663 616 336 448 504 560 616 672 63 728 504 693 378 504 567 630 693 756 819 71 568 781 426 568 639 710 781 852 923 80 640 880 480 640 720 800 880 960 1040 1300% 1700% 1300% 11x 12x 13x 754 Dampening for motor in-rush (% FLA) 1 Manual Adjustment (A)1 6x 8x 9x 10x (FLA) x (Im) — ± 5% of nominal amperage shown above. Table 144: M74 Instantaneous Trip Points Automatic Setting (A)1 Motor Type FLA Im Setting 1 2 NEMA A, B, C, D B, E IEC N H 58 464 638 348 464 522 580 638 696 71 568 781 426 568 639 710 781 852 923 79 632 869 474 632 711 790 869 948 1027 86 688 946 516 688 774 860 946 1032 1118 91 728 1001 546 728 819 910 1001 1092 1183 97 776 1067 582 776 873 970 1067 1164 1261 110 880 1210 660 880 990 1100 1210 1320 1430 119 952 1309 714 952 1071 1190 1309 1428 1547 130 1040 1430 780 1040 1170 1300 1430 1560 1690 1300% 1700% 1300% Dampening for motor in-rush (% FLA) 1 Manual Adjustment (A)1 6x 8x 9x 10x (FLA) x (Im) — ± 5% of nominal amperage shown above. Table 145: M75 Instantaneous Trip Points Automatic Setting (A)1 Motor Type FLA Manual Adjustment (A)1 Im Setting 1 2 NEMA A, B, C, D B, E 11x 12x 13x IEC N H 114 912 1254 684 912 1026 137 1096 1507 822 1096 1233 1140 1254 1368 1482 1370 1507 1644 145 1160 1595 870 1160 1781 1305 1450 1595 1740 155 1240 1705 930 1885 1240 1395 1550 1705 1860 163 1304 1793 2015 978 1304 1467 1630 1793 1956 172 1376 2119 1892 1032 1376 1548 1720 1892 2064 181 2236 1448 1991 1086 1448 1629 1810 1991 2172 210 1680 2310 1260 1680 1890 2100 2310 2500 2 2500 2 217 1736 2387 1302 1736 1953 2170 2387 2500 2 2500 2 Dampening for motor in-rush (% FLA) 1100–1300% 1100–1700% 1 ± 5% of nominal amperage shown above. 2 2500 A maximum instantaneous trip point. 6x 8x 9x 10x (FLA) x (Im) 1100– 1300% 2353 — 195 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves PowerPact H-Frame Electronic Trip Circuit Breakers— 60 A/100 A/150 A Frame Figure 80: Micrologic 3.2 Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2 Long Time Trip Curve 60A, 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 196 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 81: Micrologic 3.2S Electronic Trip Unit Long Time / Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2S Long Time/ Short Time Trip Curve 60A, 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 197 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 82: Micrologic 3.2/3.2S/5.2A/5.2E/6.2A/6.2E Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2/3.2S/5.2A or E/6.2A or E Instantaneous Trip Curve 60A, 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 60A H-Frame: In = 60A = Max Ir setting 100A H-Frame: In = 100A = Max Ir setting 150A H-Frame: In = 150A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 198 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 83: Micrologic 5.2A/5.2E/6.2A/6.2E Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.2A or E/6.2A or E Long Time Trip Curve 60A, 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 199 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 84: Micrologic 5.2A/5.2E/6.2A/6.2E Electronic Trip Unit Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.2A or E/6.2A or E Short Time Trip Curve 60A, 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 200 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 85: Micrologic 6.2A/6.2E Electronic Trip Unit Ground Fault Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 6.2A or E Ground Fault Trip Curve 100A, 150A H-Frame The time-current curve information is to be used for application and coordination purposes only. 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 201 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 86: Micrologic 6.2A/6.2E Electronic Trip Unit Ground Fault Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 6.2A or E Ground Fault Trip Curve 60A H-Frame The time-current curve information is to be used for application and coordination purposes only. 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 0.4 OFF 0.3 OFF 202 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 87: Micrologic 2.2 M Electronic Trip Unit Overload Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 2.2M Overload Trip Curve 30A, 50A, 100A, 150A H-Frame, 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. If overload still exists past overload relay delay, MCP will open 0.4 seconds later. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. Isd minimum and maximum only shown. 4. li = 15 x In In = 30A, 50A, 100A, 150A, 250A MCP will trip <30ms at 15 x In Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 203 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves J-Frame Electronic Trip Circuit Breakers—250 A Frame Figure 88: Micrologic 3.2 and 3.2-W Electronic Trip Unit Long-Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2 and 3.2-W Long Time Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 8 204 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 89: Micrologic 3.2S and 3.2S-W Electronic Trip Unit Long Time / Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2S and 3.2S-W Long Time/Short Time Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 205 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 90: Micrologic 3.2, 3.2-W, 3.2S, 3.2S-W, 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Electronic Trip Curve Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.2, 3.2-W, 3.2S, 3.2S-W, 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Instantaneous Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 250A J-Frame: In = 250A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 206 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 91: Micrologic 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Long Time Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 207 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 92: Micrologic 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Electronic Trip Unit Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.2A, 5.2A-W, 5.2E, 5.2E-W, 6.2A, 6.2A-W, 6.2E, and 6.2E-W Short Time Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 208 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 93: Micrologic 6.2A, 6.2A-W, 6.2E, and 6.2E-W Electronic Trip Unit Ground Fault Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 6.2A, 6.2A-W, 6.2E, and 6.2E-W Ground Fault Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 209 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 94: Micrologic 2.2 M Electronic Trip Unit Overload Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 2.2M Overload Trip Curve 30A, 50A, 100A, 150A H-Frame, 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. If overload still exists past overload relay delay, MCP will open 0.4 seconds later. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. Isd minimum and maximum only shown. 4. li = 15 x In In = 30A, 50A, 100A, 150A, 250A MCP will trip <30ms at 15 x In Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 210 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves PowerPact L-Frame Electronic Trip Circuit Breakers— 250 A/400 A/600 A Frame Figure 95: Micrologic 3.3 and 3.3-W Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3 and 3.3-W Long Time Trip Curve 250A, 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 211 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 96: Micrologic 3.3S and 3.3S-W Electronic Trip Unit Long Time/Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3S and 3.3S-W Long Time/Short Time Trip Curve 250A, 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 212 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 97: Micrologic 3.3, 3.3-W, 3.3S, and 3.3S-W Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3, 3.3-W, 3.3S, and 3.3S-W Instantaneous Trip Curve 250A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 250A L-Frame: In = 250A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 213 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 98: Micrologic 3.3, 3.3-W, 3.3S, 3.3S-W, 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3, 3.3-W, 3.3S, 3.3S-W, 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Instantaneous Trip Curve 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 400A L-Frame: In = 400A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 214 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 99: Micrologic 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Long Time Trip Curve 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 215 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 100: Micrologic 5.3, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Short Time Trip Curve 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 216 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 101: Micrologic 1.3 M Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 1.3M Instantaneous Trip Curve 400A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 217 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 102: Micrologic 2.3 M Electronic Trip Unit Overload Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 2.3M Overload Trip Curve 400A, 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. If overload still exists past overload relay delay, MCP will open 0.4 seconds later. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. Isd minimum and maximum only shown. 4. li = 12 x In In = 400A, 600A MCP will trip <30ms at 12 x In Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 218 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 103: Micrologic 3.3 and 3.3W Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3 and 3.3-W Long Time Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 219 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 104: Micrologic 3.3S and 3.3S-W Electronic Trip Unit Long Time/Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3S and 3.3S-W Long Time/Short Time Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 220 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 105: Micrologic 3.3, 3.3-W, 3.3S, 3.3S-W, 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 3.3, 3.3-W, 3.3S, 3.3S-W, 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Instantaneous Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 600A L-Frame: In = 600A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 221 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 106: Micrologic 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Long Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Long Time Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 16 222 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 107: Micrologic 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Electronic Trip Unit Short Time Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 5.3A, 5.3A-W, 5.3E, 5.3E-W, 6.3A, 6.3A-W, 6.3E, and 6.3E-W Short Time Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 223 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 108: Micrologic 6.3A, 6.3A-W, 6.3E, and 6.3E-W Ground-Fault Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 6.3A, 6.3A-W, 6.3E, and 6.3E-W Ground Fault Trip Curve 400A, 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 224 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 109: Micrologic 1.3 M Electronic Trip Unit Instantaneous Trip Curve MICROLOGIC™ ELECTRONIC TRIP UNITS Micrologic™ 1.3M Instantaneous Trip Curve 600A L-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature. 225 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves ) Figure 110: L-Frame 600 A Typical Peak Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7/² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 /'/*/-//$1'/5³$ Ip 70000 Maximum Available Peak Current at 15% Power Factor 60000 R R 50000 480 V 3Ø 600 V 3Ø L R L 40000 240 V 3Ø L J Maximum Available Peak Current at 25% Power Factor J J 30000 G G G D D D 200000 150000 100000 90000 80000 70000 60000 50000 40000 30000 15000 20000 20000 10000 Typical* Peak Let-Through Current (Amperes) *Based on typical values obtained throughout the circuit breaker development and UL test programs. 3($./(77+528*+&855(17OS Available Short Circuit Current (RMS Symmetrical Amperes) 226 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 111: L-Frame 600 A Typical I2t Let-Through Curves (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7/² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 /'/*/-//$1'/5³$ /(77+528*+OW R 600 V 3Ø 4 L R 480 V 3Ø 3 L J J 2 G G D R D J L 240 V 3Ø G 200000 150000 100000 90000 80000 70000 60000 50000 40000 30000 1 20000 D 10000 Typical* Let-Through I2t (Amperes2 Seconds x 106) *Based on typical values obtained throughout the circuit breaker development and UL test programs. I2 t 5 Available Short Circuit Current (RMS Symmetrical Amperes) 227 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 112: L-Frame UL Listed Current-Limiting Circuit Breaker (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7/² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 /-//$1'/5³$ Ip 70000 Maximum Available Peak Current at 15% Power Factor 60000 480 V 3Ø 600 V 3Ø 50000 240 V 3Ø 40000 30000 200000 150000 100000 90000 80000 70000 60000 50000 40000 30000 15000 20000 20000 10000 Maximum* Peak Let-Through Current (Amperes) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. 3($./(77+528*+&855(17OS Availability (RMS Symmetrical Amperes) 228 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Trip Curves Figure 113: L-Frame UL Listed Current-Limiting Circuit Breaker (/(&7521,&02/'('&$6(&,5&8,7%5($.(56 32:(53$&7/² )5$0(&855(17/,0,7,1*&,5&8,7%5($.(56 $)5$0($7$1'9 /-//$1'/5³$ I2 t 5 600 V 3Ø 480 V 3Ø 4 3 2 200000 150000 100000 90000 80000 70000 60000 50000 40000 30000 1 20000 240 V 3Ø 10000 Maximum* Let-Through I2t (Amperes2 Seconds x 106) *Based on maximum values obtained throughout the circuit breaker development and UL test programs. /(77+528*+OW Availability (RMS Symmetrical Amperes) Figure 114: L-Frame Circuit Breaker Reflex Tripping 20 L-Frame 600 A L-Frame 400 A 10 8 t (ms) 7 6 5 4 3 2 3 4 6 10 20 30 40 60 100 200 I (kA RMS) 229 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers Catalog Numbers .................................... 123 .................................... 123 .................................... 123 29271 .......................... 122 32521 .......................... 122 32556 .......................... 113 32595 .......................... 114 685823 .......................... 83 685824 .......................... 83 685825 .......................... 83 685826 .......................... 83 685827 .......................... 83 685829 .......................... 83 685831 .......................... 84 9421LC46 ................... 108 9421LD1 ..................... 108 9421LD4 ..................... 108 9421LH46 ................... 108 9421LH6 ..................... 108 9421LJ1 ...................... 107 9421LJ4 ...................... 107 9421LJ7 ...................... 108 9421LS13 ................... 108 9421LS8 ..................... 108 9422A1 ....................... 108 9422CSF10 ................. 108 9422CSF30 ................. 108 9422CSF50 ................. 108 9422CSF70 ................. 108 9422CSJ10 ................. 108 9422CSJ30 ................. 108 9422CSJ50 ................. 108 9422RSI ...................... 108 9422RSI ...................... 109 AL150HD .................... 124 AL175JD ..................... 124 AL250JD ..................... 124 AL400L61K3 ............... 124 AL400L61K4 ............... 124 AL600LF52K34 ........... 124 AL600LS52K3 ............. 124 AL600LS52K44 ........... 124 CU150HD ................... 124 CU250JD .................... 124 CU400L61K3 .............. 124 CU400L61K4 .............. 124 CU600LF52K34 .......... 124 CU600LS52K34 .......... 124 CU600LS52K44 .......... 124 CYA060HD ................. 128 CYA060HD ................. 128 CYA150HD ................. 128 CYA150HD ................. 128 CYA150JD .................. 128 CYA150JD .................. 128 CYA250J3 ................... 128 CYA250J3 ................... 128 CYA400L31K3 ............ 128 CYA400L31K4 ............ 128 CYA400L51K3 ............ 128 CYA400L51K4 ............ 128 CYA600L32K3 ............ 128 CYA600L32K4 ............ 128 CYA600L52K3 ............ 128 CYA600L52K4 ............ 128 ELM150HD ................. 105 ELM250JD .................. 105 GFM150HD ................. 104 GFM250JD ................. 104 HDA26015( ) ................. 30 HDA26020( ) ................. 30 HDA26025( ) ................. 30 HDA26030( ) ................. 30 HDA26035( ) ................. 30 HDA26040( ) ................. 30 HDA26045( ) ................. 30 HDA26050( ) ................. 30 HDA26060( ) ................. 30 HDA26070( ) ................ 30 HDA26080( ) ................ 30 HDA26090( ) ................ 30 HDA26100( ) ................ 30 HDA26110( ) ................ 30 HDA26125( ) ................ 30 HDA26150( ) ................ 30 HDA261501 ................ 119 HDA261502 ................ 119 HDA261503 ................ 119 HDA261504 ................ 119 HDA261505 ................ 119 HDA261506 ................ 119 HDA36015 .................... 30 HDA36020 .................... 30 HDA36025 .................... 30 HDA36030 .................... 30 HDA36035 .................... 30 HDA36040 .................... 30 HDA36045 .................... 30 HDA36050 .................... 30 HDA36060 .................... 30 HDA36060U31X ........... 32 HDA36060U33X ........... 32 HDA36060U43X ........... 32 HDA36060U44X ........... 32 HDA36060U53X ........... 32 HDA36060U54X ........... 32 HDA36070 .................... 30 HDA36080 .................... 30 HDA36090 .................... 30 HDA36100 .................... 30 HDA36100U31X ........... 32 HDA36100U33X ........... 32 HDA36100U43X ........... 32 HDA36100U44X ........... 32 HDA36100U53X ........... 32 HDA36100U54X ........... 32 HDA36110 .................... 30 HDA36125 .................... 30 HDA36150 .................. 119 HDA36150 .................... 30 HDA361506 ................ 119 HDA36150U31X ........... 32 HDA36150U33X ........... 32 HDA36150U43X ........... 32 HDA36150U44X ........... 32 HDA36150U53X ........... 32 HDA36150U54X ........... 32 HDF36000F06 .............. 35 HDF36000F15 .............. 35 HDL26015 .................... 26 HDL26015C .................. 26 HDL26020 .................... 26 HDL26020C .................. 26 HDL26025 .................... 26 HDL26025C .................. 26 HDL26030 .................... 26 HDL26030C .................. 26 HDL26035 .................... 26 HDL26035C .................. 26 HDL26040 .................... 26 HDL26040C .................. 26 HDL26045 .................... 26 HDL26045C .................. 26 HDL26050 .................... 26 HDL26050C .................. 26 HDL26060 .................... 26 HDL26060C .................. 26 HDL26070 .................... 26 HDL26070C .................. 26 HDL26080 .................... 26 HDL26080C .................. 26 HDL26090 .................... 26 HDL26090C .................. 26 HDL26100 .................... 26 HDL26100C .................. 26 HDL26110 .................... 26 HDL36110T .................. 33 HDL36125 .................... 26 HDL36125C .................. 26 HDL36125T .................. 33 HDL36150 .................... 26 HDL36150C .................. 26 HDL36150CU31X ......... 28 HDL36150CU33X ......... 28 HDL36150CU43X ......... 28 HDL36150CU53X ......... 28 HDL36150T .................. 33 HDL36150TU31X ......... 34 HDL36150TU33X ......... 34 HDL36150TU43X ......... 34 HDL36150TU44X ......... 34 HDL36150TU53X ......... 34 HDL36150TU54X ......... 34 HDL36150U31X ........... 28 HDL36150U33X ........... 28 HDL36150U43X ........... 28 HDL36150U44X ........... 28 HDL36150U53X ........... 28 HDL36150U54X ........... 28 HE3060U31X ................ 35 HE3060U31X ................ 68 HE3060U33X ................ 35 HE3060U33X ................ 68 HE3060U43X ................ 35 HE3060U43X ................ 69 HE3060U43X ................ 69 HE3060U44X ................ 35 HE3060U44X ................ 69 HE3060U53X ................ 35 HE3060U53X ................ 69 HE3060U54X ................ 35 HE3060U54X ................ 69 HE3100U31X ................ 35 HE3100U31X ................ 68 HE3100U33X ................ 35 HE3100U33X ................ 68 HE3100U43X ................ 35 HE3100U44X ................ 35 HE3100U44X ................ 69 HE3100U53X ................ 35 HE3100U53X ................ 69 HE3100U54X ................ 35 HE3100U54X ................ 69 HE3150U31X ................ 35 HE3150U31X ................ 68 HE3150U33X ................ 35 HE3150U33X ................ 68 HE3150U43X ................ 35 HE3150U43X ................ 69 HE3150U44X ................ 35 HE3150U44X ................ 69 HE3150U53X ................ 35 HE3150U53X ................ 69 HE3150U54X ................ 35 HE3150U54X ................ 69 HGA26015( ) ................ 30 HGA26020( ) ................ 30 HGA26025( ) ................ 30 HGA26030( ) ................ 30 HGA26035( ) ................ 30 HGA26040( ) ................ 30 HGA26045( ) ................ 30 HGA26050( ) ................ 30 HGA26060( ) ................ 30 HGA26070( ) ................ 30 HGA26080( ) ................ 30 HGA26090( ) ................ 30 HGA26100( ) ................ 30 HGA26110( ) ................ 30 HGA26125( ) ................ 30 HGA26150( ) ................ 30 HGA36015 .................... 30 HGA36020 .................... 30 HGA36025 .................... 30 HDL26110C ..................26 HDL26125 .....................26 HDL26125C ..................26 HDL26150 .....................26 HDL26150C ..................26 HDL36015 .....................26 HDL36015C ..................26 HDL36015T ...................33 HDL36020 .....................26 HDL36020C ..................26 HDL36020T ...................33 HDL36025 .....................26 HDL36025C ..................26 HDL36025T ...................33 HDL36030 .....................26 HDL36030C ..................26 HDL36030T ...................33 HDL36035 .....................26 HDL36035C ..................26 HDL36035T ...................33 HDL36040 .....................26 HDL36040C ..................26 HDL36040T ...................33 HDL36045 .....................26 HDL36045C ..................26 HDL36045T ...................33 HDL36050 .....................26 HDL36050C ..................26 HDL36050T ...................33 HDL36060 .....................26 HDL36060C ..................26 HDL36060CU31X .........28 HDL36060CU33X .........28 HDL36060CU43X .........28 HDL36060CU53X .........28 HDL36060T ...................33 HDL36060TU31X ..........34 HDL36060TU33X ..........34 HDL36060TU43X ..........34 HDL36060TU44X ..........34 HDL36060TU53X ..........34 HDL36060TU54X ..........34 HDL36060U31X ............28 HDL36060U33X ............28 HDL36060U43X ............28 HDL36060U44X ............28 HDL36060U53X ............28 HDL36060U54X ............28 HDL36070 .....................26 HDL36070C ..................26 HDL36070T ...................33 HDL36080 .....................26 HDL36080C ..................26 HDL36080T ...................33 HDL36090 .....................26 HDL36090C ..................26 HDL36090T ...................33 HDL36100 .....................26 HDL36100C ..................26 HDL36100CU31X .........28 HDL36100CU33X .........28 HDL36100CU43X .........28 HDL36100CU53X .........28 HDL36100T ...................33 HDL36100TU31X ..........34 HDL36100TU33X ..........34 HDL36100TU43X ..........34 HDL36100TU44X ..........34 HDL36100TU53X ..........34 HDL36100TU54X ..........34 HDL36100U31X ............28 HDL36100U33X ............28 HDL36100U43X ............28 HDL36100U44X ............28 HDL36100U53X ............28 HDL36100U54X ............28 HDL36110 .....................26 HDL36110C ..................26 HGA36030 ....................30 HGA36035 ....................30 HGA36040 ....................30 HGA36045 ....................30 HGA36050 ....................30 HGA36060 ....................30 HGA36060U31X ...........32 HGA36060U33X ...........32 HGA36060U43X( ..........32 HGA36060U44X ...........32 HGA36060U53X ...........32 HGA36060U54X ...........32 HGA36070 ....................30 HGA36080 ....................30 HGA36090 ....................30 HGA36100 ....................30 HGA36100U31X ...........32 HGA36100U33X ...........32 HGA36100U43X ...........32 HGA36100U44X ...........32 HGA36100U53X ...........32 HGA36100U54X ...........32 HGA36110 ....................30 HGA36125 ....................30 HGA36150 ....................30 HGA36150U31X ...........32 HGA36150U33X ...........32 HGA36150U43X ...........32 HGA36150U44X ...........32 HGA36150U53X ...........32 HGA36150U54X ...........32 HGF36000F06 ..............35 HGF36000F15 ..............35 HGL26015 .....................26 HGL26015C ..................26 HGL26020 .....................26 HGL26020C ..................26 HGL26025 .....................26 HGL26025C ..................26 HGL26030 .....................26 HGL26030C ..................26 HGL26035 .....................26 HGL26035C ..................26 HGL26040 .....................26 HGL26040C ..................26 HGL26045 .....................26 HGL26045C ..................26 HGL26050 .....................26 HGL26050C ..................26 HGL26060 .....................26 HGL26060C ..................26 HGL26070 .....................26 HGL26070C ..................26 HGL26080 .....................26 HGL26080C ..................26 HGL26090 .....................26 HGL26090C ..................26 HGL26100 .....................26 HGL26100C ..................26 HGL26110 .....................26 HGL26110C ..................26 HGL26125 .....................26 HGL26125C ..................26 HGL26150 .....................26 HGL26150C ..................26 HGL36015 .....................26 HGL36015C ..................26 HGL36015T ...................33 HGL36020 .....................26 HGL36020C ..................26 HGL36020T ...................33 HGL36025 .....................26 HGL36025C ..................26 HGL36025T ...................33 HGL36030 .....................26 HGL36030C ..................26 HGL36030T ...................33 HGL36035 .....................26 230 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers HGL36035C .................. 26 HGL36035T .................. 33 HGL36040 .................... 26 HGL36040C .................. 26 HGL36040T .................. 33 HGL36045 .................... 26 HGL36045C .................. 26 HGL36045T .................. 33 HGL36050 .................... 26 HGL36050C .................. 26 HGL36050T .................. 33 HGL36060 .................... 26 HGL36060C .................. 26 HGL36060CU31X ......... 28 HGL36060CU33X ......... 28 HGL36060CU43X ......... 28 HGL36060CU53X ......... 28 HGL36060T .................. 33 HGL36060TU31X ......... 34 HGL36060TU33X ......... 34 HGL36060TU43X ......... 34 HGL36060TU44X ......... 34 HGL36060TU53X ......... 34 HGL36060TU54X ......... 34 HGL36060U31X ........... 28 HGL36060U33X ........... 28 HGL36060U43X ........... 28 HGL36060U44X ........... 28 HGL36060U53X ........... 28 HGL36060U54X ........... 28 HGL36070 .................... 26 HGL36070C .................. 26 HGL36070T .................. 33 HGL36080 .................... 26 HGL36080C .................. 26 HGL36080T .................. 33 HGL36090 .................... 26 HGL36090C .................. 26 HGL36090T .................. 33 HGL36100 .................... 26 HGL36100C .................. 26 HGL36100CU31X ......... 28 HGL36100CU33X ......... 28 HGL36100CU43X ......... 28 HGL36100CU53X ......... 28 HGL36100T .................. 33 HGL36100TU31X ......... 34 HGL36100TU33X ......... 34 HGL36100TU43X ......... 34 HGL36100TU44X ......... 34 HGL36100TU53X ......... 34 HGL36100TU54X ......... 34 HGL36100U31X ........... 28 HGL36100U33X ........... 28 HGL36100U43X ........... 28 HGL36100U44X ........... 28 HGL36100U53X ........... 28 HGL36100U54X ........... 28 HGL36110 .................... 26 HGL36110C .................. 26 HGL36110T .................. 33 HGL36125 .................... 26 HGL36125C .................. 26 HGL36125T .................. 33 HGL36150 .................... 26 HGL36150C .................. 26 HGL36150CU31X ......... 28 HGL36150CU33X ......... 28 HGL36150CU43X ......... 28 HGL36150CU53X ......... 28 HGL36150T .................. 33 HGL36150TU31X ......... 34 HGL36150TU33X ......... 34 HGL36150TU43X ......... 34 HGL36150TU44X ......... 34 HGL36150TU53X ......... 34 HGL36150TU54X ......... 34 HGL36150U31X ........... 28 HGL36150U33X ........... 28 HGL36150U43X ........... 28 HGL36150U44X ........... 28 HGL36150U53X ........... 28 HGL36150U54X ........... 28 HJA26015( ) ................. 30 HJA26020( ) ................. 30 HJA26025( ) ................. 30 HJA26030( ) ................. 30 HJA26035( ) ................. 30 HJA26040( ) ................. 30 HJA26045( ) ................. 30 HJA26050( ) ................. 30 HJA26060( ) ................. 30 HJA26070( ) ................. 30 HJA26080( ) ................. 30 HJA26090( ) ................. 30 HJA26100( ) ................. 30 HJA26110( ) ................. 30 HJA26125( ) ................. 30 HJA26150( ) ................. 30 HJA36015 ..................... 30 HJA36020 ..................... 30 HJA36025 ..................... 30 HJA36030 ..................... 30 HJA36035 ..................... 30 HJA36040 ..................... 30 HJA36045 ..................... 30 HJA36050 ..................... 30 HJA36060 ..................... 30 HJA36060U31X ............ 32 HJA36060U33X ............ 32 HJA36060U43X ............ 32 HJA36060U44X ............ 32 HJA36060U53X ............ 32 HJA36060U54X ............ 32 HJA36070 ..................... 30 HJA36080 ..................... 30 HJA36090 ..................... 30 HJA36100 ..................... 30 HJA36100U31X ............ 32 HJA36100U33X ............ 32 HJA36100U43X ............ 32 HJA36100U44X ............ 32 HJA36100U53X ............ 32 HJA36100U54X ............ 32 HJA36110 ..................... 30 HJA36125 ..................... 30 HJA36150 ..................... 30 HJA36150U31X ............ 32 HJA36150U33X ............ 32 HJA36150U43X ............ 32 HJA36150U44X ............ 32 HJA36150U53X ............ 32 HJA36150U54X( .......... 32 HJF36000F06 ............... 35 HJF36000F15 ............... 35 HJL26015 ..................... 26 HJL26015C .................. 26 HJL26020 ..................... 26 HJL26020C .................. 26 HJL26025 ..................... 26 HJL26025C .................. 26 HJL26030 ..................... 26 HJL26030C .................. 26 HJL26035 ..................... 26 HJL26035C .................. 26 HJL26040 ..................... 26 HJL26040C .................. 26 HJL26045 ..................... 26 HJL26045C .................. 26 HJL26050 ..................... 26 HJL26050C .................. 26 HJL26060 ..................... 26 HJL26060C .................. 26 HJL26070 ..................... 26 HJL26070C .................. 26 HJL26080 ..................... 26 HJL26080C .................. 26 HJL26090 ..................... 26 HJL26090C .................. 26 HJL26100 ..................... 26 HJL26100C ...................26 HJL26110 ......................26 HJL26110C ...................26 HJL26125 ......................26 HJL26125C ...................26 HJL26150 ......................26 HJL26150C ...................26 HJL36015 ......................26 HJL36015C ...................26 HJL36015T ...................33 HJL36020 ......................26 HJL36020C ...................26 HJL36020T ...................33 HJL36025 ......................26 HJL36025C ...................26 HJL36025T ...................33 HJL36030 ......................26 HJL36030C ...................26 HJL36030M71 ...............50 HJL36030T ...................33 HJL36035 ......................26 HJL36035C ...................26 HJL36035T ...................33 HJL36040 ......................26 HJL36040C ...................26 HJL36040T ...................33 HJL36045 ......................26 HJL36045C ...................26 HJL36045T ...................33 HJL36050 ......................26 HJL36050C ...................26 HJL36050M72 ...............50 HJL36050T ...................33 HJL36060 ......................26 HJL36060C ...................26 HJL36060CU31X ..........28 HJL36060CU33X ..........28 HJL36060CU43X ..........28 HJL36060CU53X ..........28 HJL36060T ...................33 HJL36060TU31X ..........34 HJL36060TU33X ..........34 HJL36060TU43X ..........34 HJL36060TU44X ..........34 HJL36060TU53X ..........34 HJL36060TU54X ..........34 HJL36060U31X .............28 HJL36060U33X .............28 HJL36060U43X .............28 HJL36060U44X .............28 HJL36060U53X .............28 HJL36060U54X .............28 HJL36070 ......................26 HJL36070C ...................26 HJL36070T ...................33 HJL36080 ......................26 HJL36080C ...................26 HJL36080T ...................33 HJL36090 ......................26 HJL36090C ...................26 HJL36090T ...................33 HJL36100 ......................26 HJL36100C ...................26 HJL36100CU31X ..........28 HJL36100CU33X ..........28 HJL36100CU43X ..........28 HJL36100CU53X ..........28 HJL36100M73 ...............50 HJL36100T ...................33 HJL36100TU31X ..........34 HJL36100TU33X ..........34 HJL36100TU43X ..........34 HJL36100TU44X ..........34 HJL36100TU53X ..........34 HJL36100TU54X ..........34 HJL36100U31X .............28 HJL36100U33X .............28 HJL36100U43X .............28 HJL36100U44X .............28 HJL36100U53X .............28 HJL36100U54X ............ 28 HJL36110 ..................... 26 HJL36110C ................... 26 HJL36110T ................... 33 HJL36125 ..................... 26 HJL36125C ................... 26 HJL36125T ................... 33 HJL36150 ..................... 26 HJL36150C ................... 26 HJL36150CU31X .......... 28 HJL36150CU33X .......... 28 HJL36150CU43X .......... 28 HJL36150CU53X .......... 28 HJL36150M74 .............. 50 HJL36150T ................... 33 HJL36150TU31X .......... 34 HJL36150TU33X .......... 34 HJL36150TU43X .......... 34 HJL36150TU44X .......... 34 HJL36150TU53X .......... 34 HJL36150TU54X .......... 34 HJL36150U31X ............ 28 HJL36150U33X ............ 28 HJL36150U43X ............ 28 HJL36150U44X ............ 28 HJL36150U53X ............ 28 HJL36150U54X ............ 28 HLA26015( ) ................. 30 HLA26020( ) ................. 30 HLA26025( ) ................. 30 HLA26030( ) ................. 30 HLA26035( ) ................. 30 HLA26040( ) ................. 30 HLA26045( ) ................. 30 HLA26050( ) ................. 30 HLA26060( ) ................. 30 HLA26070( ) ................. 30 HLA26080( ) ................. 30 HLA26090( ) ................. 30 HLA26100( ) ................. 30 HLA26110( ) ................. 30 HLA26125( ) ................. 30 HLA26150( ) ................. 30 HLA36015 ..................... 30 HLA36020 ..................... 30 HLA36025 ..................... 30 HLA36030 ..................... 30 HLA36035 ..................... 30 HLA36040 ..................... 30 HLA36045 ..................... 30 HLA36050 ..................... 30 HLA36060 ..................... 30 HLA36060U31X ............ 32 HLA36060U33X ............ 32 HLA36060U43X ............ 32 HLA36060U44X ............ 32 HLA36060U53X ............ 32 HLA36060U54X ............ 32 HLA36070 ..................... 30 HLA36080 ..................... 30 HLA36090 ..................... 30 HLA36100 ..................... 30 HLA36100U31X ............ 32 HLA36100U33X ............ 32 HLA36100U43X ............ 32 HLA36100U44X ............ 32 HLA36100U53X ............ 32 HLA36100U54X ............ 32 HLA36110 ..................... 30 HLA36125 ..................... 30 HLA36150 ..................... 30 HLA36150U31 .............. 32 HLA36150U33X ............ 32 HLA36150U43X ............ 32 HLA36150U44X ............ 32 HLA36150U53X ............ 32 HLA36150U54X ............ 32 HLF36000F06 ............... 35 HLF36000F15 ............... 35 HLL26015 ..................... 26 HLL26015C ...................26 HLL26020 ......................26 HLL26020C ...................26 HLL26025 ......................26 HLL26025C ...................26 HLL26030 ......................26 HLL26030C ...................26 HLL26035 ......................26 HLL26035C ...................26 HLL26040 ......................26 HLL26040C ...................26 HLL26045 ......................26 HLL26045C ...................26 HLL26050 ......................26 HLL26050C ...................26 HLL26060 ......................26 HLL26060C ...................26 HLL26070 ......................26 HLL26070C ...................26 HLL26080 ......................26 HLL26080C ...................26 HLL26090 ......................26 HLL26090C ...................26 HLL26100 ......................26 HLL26100C ...................26 HLL26110 ......................26 HLL26110C ...................26 HLL26125 ......................26 HLL26125C ...................26 HLL26150 ......................26 HLL26150C ...................26 HLL36015 ......................26 HLL36015C ...................26 HLL36015T ...................33 HLL36020 ......................26 HLL36020C ...................26 HLL36020T ...................33 HLL36025 ......................26 HLL36025C ...................26 HLL36025T ...................33 HLL36030 ......................26 HLL36030C ...................26 HLL36030M71 ...............50 HLL36030T ...................33 HLL36035 ......................26 HLL36035C ...................26 HLL36035T ...................33 HLL36040 ......................26 HLL36040C ...................26 HLL36040T ...................33 HLL36045 ......................26 HLL36045C ...................26 HLL36045T ...................33 HLL36050 ......................26 HLL36050C ...................26 HLL36050M72 ...............50 HLL36050T ...................33 HLL36060 ......................26 HLL36060C ...................26 HLL36060CU31X ..........28 HLL36060CU33X ..........28 HLL36060CU43X ..........28 HLL36060CU53X ..........28 HLL36060T ...................33 HLL36060TU31X ..........34 HLL36060TU33X ..........34 HLL36060TU43X ..........34 HLL36060TU44X ..........34 HLL36060TU53X ..........34 HLL36060TU54X ..........34 HLL36060U31X .............28 HLL36060U33X .............28 HLL36060U43X .............28 HLL36060U44X .............28 HLL36060U53X .............28 HLL36060U54X .............28 HLL36070 ......................26 HLL36070C ...................26 HLL36070T ...................33 HLL36080 ......................26 231 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers HLL36080C ................... 26 HLL36080T ................... 33 HLL36090 ..................... 26 HLL36090C ................... 26 HLL36090T ................... 33 HLL36100 ..................... 26 HLL36100C ................... 26 HLL36100CU31X .......... 28 HLL36100CU33X .......... 28 HLL36100CU43X .......... 28 HLL36100CU53X .......... 28 HLL36100M73 .............. 50 HLL36100T ................... 33 HLL36100TU31X .......... 34 HLL36100TU33X .......... 34 HLL36100TU43X .......... 34 HLL36100TU44X .......... 34 HLL36100TU53X .......... 34 HLL36100TU54X .......... 34 HLL36100U31X ............ 28 HLL36100U33X ............ 28 HLL36100U43X ............ 28 HLL36100U44X ............ 28 HLL36100U53X ............ 28 HLL36100U54X ............ 28 HLL36110 ..................... 26 HLL36110C ................... 26 HLL36110T ................... 33 HLL36125 ..................... 26 HLL36125C ................... 26 HLL36125T ................... 33 HLL36150 ..................... 26 HLL36150C ................... 26 HLL36150CU31X .......... 28 HLL36150CU33X .......... 28 HLL36150CU43X .......... 28 HLL36150CU53X .......... 28 HLL36150M74 .............. 50 HLL36150T ................... 33 HLL36150TU31X .......... 34 HLL36150TU33X .......... 34 HLL36150TU43X .......... 34 HLL36150TU44X .......... 34 HLL36150TU53X .......... 34 HLL36150TU54X .......... 34 HLL36150U31X ............ 28 HLL36150U33X ............ 28 HLL36150U43X ............ 28 HLL36150U44X ............ 28 HLL36150U53X ............ 28 HLL36150U54X ............ 28 HRA36060U31X ........... 32 HRA36060U33X ........... 32 HRA36060U43X ........... 32 HRA36060U44X ........... 32 HRA36060U53X ........... 32 HRA36060U54X ........... 32 HRA36100U31X ........... 32 HRA36100U33X ........... 32 HRA36100U43X ........... 32 HRA36100U44X ........... 32 HRA36100U53X ........... 32 HRA36100U54X ........... 32 HRA36150U31 .............. 32 HRA36150U33X ........... 32 HRA36150U43X ........... 32 HRA36150U44X ........... 32 HRA36150U53X ........... 32 HRA36150U54X ........... 32 HRL36030M71 .............. 50 HRL36050M72 .............. 50 HRL36060CU31X ......... 28 HRL36060CU33X ......... 28 HRL36060CU43X ......... 28 HRL36060CU53X ......... 28 HRL36060U31X ............ 28 HRL36060U33X ............ 28 HRL36060U43X ............ 28 HRL36060U44X ............ 28 HRL36060U53X ............ 28 HRL36060U54X ........... 28 HRL36100CU31X ......... 28 HRL36100CU33X ......... 28 HRL36100CU43X ......... 28 HRL36100CU53X ......... 28 HRL36100M73 ............. 50 HRL36100U31X ........... 28 HRL36100U33X ........... 28 HRL36100U43X ........... 28 HRL36100U44X ........... 28 HRL36100U53X ........... 28 HRL36100U54X ........... 28 HRL36150CU31X ......... 28 HRL36150CU33X ......... 28 HRL36150CU43X ......... 28 HRL36150CU53X ......... 28 HRL36150M74 ............. 50 HRL36150U31X ........... 28 HRL36150U33X ........... 28 HRL36150U43X ........... 28 HRL36150U44X ........... 28 HRL36150U53X ........... 28 HRL36150U54X ........... 28 HT3015 ......................... 34 HT3015 ......................... 61 HT3020 ......................... 34 HT3020 ......................... 61 HT3025 ......................... 34 HT3025 ......................... 61 HT3030 ......................... 34 HT3030 ......................... 61 HT3035 ......................... 34 HT3035 ......................... 61 HT3040 ......................... 34 HT3040 ......................... 61 HT3045 ......................... 34 HT3045 ......................... 61 HT3050 ......................... 34 HT3050 ......................... 61 HT3060 ......................... 34 HT3060 ......................... 61 HT3070 ......................... 34 HT3070 ......................... 61 HT3080 ......................... 34 HT3080 ......................... 61 HT3090 ......................... 34 HT3090 ......................... 61 HT3100 ......................... 34 HT3100 ......................... 61 HT3110 ......................... 34 HT3110 ......................... 61 HT3125 ......................... 34 HT3125 ......................... 61 HT3150 ......................... 34 HT3150 ......................... 61 JDA26150( ) ................. 31 JDA26175( ) ................. 31 JDA26200( ) ................. 31 JDA26225( ) ................. 31 JDA26250( ) ................. 31 JDA34250WU31X ........ 32 JDA34250WU33X ........ 32 JDA34250WU43X ........ 32 JDA34250WU44X ........ 32 JDA34250WU53X ........ 32 JDA34250WU54X ........ 32 JDA36150 ..................... 31 JDA36175 ..................... 31 JDA36200 ..................... 31 JDA36225 ..................... 31 JDA36250 ..................... 31 JDA36250U31X ............ 32 JDA36250U33X ............ 32 JDA36250U43X ............ 32 JDA36250U44X ............ 32 JDA36250U53X ............ 32 JDA36250U54X ............ 32 JDF36000F25 ............... 35 JDL26150 ..................... 27 JDL26150C .................. 27 JDL26175 ......................27 JDL26175C ...................27 JDL26200 ......................27 JDL26200C ...................27 JDL26225 ......................27 JDL26225C ...................27 JDL26250 ......................27 JDL26250C ...................27 JDL34250WU31X .........29 JDL34250WU33X .........29 JDL34250WU43X .........29 JDL34250WU44X .........29 JDL34250WU53X .........29 JDL34250WU54X .........29 JDL36150 ......................27 JDL36150C ...................27 JDL36150T ...................33 JDL36175 ......................27 JDL36175C ...................27 JDL36175T ...................33 JDL36200 ......................27 JDL36200C ...................27 JDL36200T ...................33 JDL36225 ......................27 JDL36225C ...................27 JDL36225T ...................33 JDL36250 ......................27 JDL36250C ...................27 JDL36250CU31X ..........28 JDL36250CU33X ..........28 JDL36250CU43X ..........28 JDL36250CU53X ..........28 JDL36250T ...................33 JDL36250TU31X ..........34 JDL36250TU33X ..........34 JDL36250TU43X ..........34 JDL36250TU44X ..........34 JDL36250TU53X ..........34 JDL36250TU54X ..........34 JDL36250U31X .............28 JDL36250U33X .............28 JDL36250U43X .............28 JDL36250U44X .............28 JDL36250U53X .............28 JDL36250U54X .............28 JE3250U31X .................35 JE3250U31X .................68 JE3250U33X .................35 JE3250U33X .................68 JE3250U43X .................35 JE3250U43X .................69 JE3250U44X .................35 JE3250U44X .................69 JE3250U53X .................35 JE3250U53X .................69 JE3250U54X .................35 JE3250U54X .................69 JGA26150( ) ..................31 JGA26175( ) ..................31 JGA26200( ) ..................31 JGA26225( ) ..................31 JGA26250( ) ..................31 JGA34250WU31X .........32 JGA34250WU33X .........32 JGA34250WU43X .........32 JGA34250WU44X .........32 JGA34250WU53X .........32 JGA34250WU54X .........32 JGA36150 .....................31 JGA36175 .....................31 JGA36200 .....................31 JGA36225 .....................31 JGA36250 .....................31 JGA36250U31X ............32 JGA36250U33X ............32 JGA36250U43X ............32 JGA36250U44X ............32 JGA36250U53X ............32 JGA36250U54X ............32 JGF36000F25 ...............35 JGL26150 ..................... 27 JGL26150C ................... 27 JGL26175 ..................... 27 JGL26175C ................... 27 JGL26200 ..................... 27 JGL26200C ................... 27 JGL26225 ..................... 27 JGL26225C ................... 27 JGL26250 ..................... 27 JGL26250C ................... 27 JGL34250WU31X ......... 29 JGL34250WU33X ......... 29 JGL34250WU43X ......... 29 JGL34250WU44X ......... 29 JGL34250WU53X ......... 29 JGL34250WU54X ......... 29 JGL36150 ..................... 27 JGL36150C ................... 27 JGL36150T ................... 33 JGL36175 ..................... 27 JGL36175C ................... 27 JGL36175T ................... 33 JGL36200 ..................... 27 JGL36200C ................... 27 JGL36200T ................... 33 JGL36225 ..................... 27 JGL36225C ................... 27 JGL36225T ................... 33 JGL36250 ..................... 27 JGL36250C ................... 27 JGL36250CU31X .......... 28 JGL36250CU33X .......... 28 JGL36250CU43X .......... 28 JGL36250CU53X .......... 28 JGL36250T ................... 33 JGL36250TU31X .......... 34 JGL36250TU33X .......... 34 JGL36250TU43X .......... 34 JGL36250TU44X .......... 34 JGL36250TU53X .......... 34 JGL36250TU54X .......... 34 JGL36250U31X ............ 28 JGL36250U33X ............ 28 JGL36250U43X ............ 28 JGL36250U44X ............ 28 JGL36250U53X ............ 28 JGL36250U54X ............ 28 JGL37100D81 ............... 18 JGL37125D81 ............... 18 JGL37150D81 ............... 18 JGL37175D81 ............... 18 JGL37200D82 ............... 18 JGL37225D82 ............... 18 JGL37250D82 ............... 18 JJA26150( ) .................. 31 JJA26175( ) .................. 31 JJA26200( ) .................. 31 JJA26225( ) .................. 31 JJA26250( ) .................. 31 JJA34250WU31X ......... 32 JJA34250WU33X ......... 32 JJA34250WU43X ......... 32 JJA34250WU44X ......... 32 JJA34250WU53X ......... 32 JJA34250WU54X ......... 32 JJA36150 ...................... 31 JJA36175 ...................... 31 JJA36200 ...................... 31 JJA36225 ...................... 31 JJA36250 ...................... 31 JJA36250U31X ............. 32 JJA36250U33X ............. 32 JJA36250U43X ............. 32 JJA36250U44X ............. 32 JJA36250U53X ............. 32 JJA36250U54X ............. 32 JJF36000F25 ................ 35 JJL26150 ...................... 27 JJL26150C .................... 27 JJL26175 ...................... 27 JJL26175C ................... 27 JJL26200 ...................... 27 JJL26200C ................... 27 JJL26225 ...................... 27 JJL26225C ................... 27 JJL26250 ...................... 27 JJL26250C ................... 27 JJL34250WU31X ......... 29 JJL34250WU33X ......... 29 JJL34250WU43X ......... 29 JJL34250WU44X ......... 29 JJL34250WU53X ......... 29 JJL34250WU54X ......... 29 JJL36150 ...................... 27 JJL36150C ................... 27 JJL36150T .................... 33 JJL36175 ...................... 27 JJL36175C ................... 27 JJL36175T .................... 33 JJL36200 ...................... 27 JJL36200C ................... 27 JJL36200T .................... 33 JJL36225 ...................... 27 JJL36225C ................... 27 JJL36225T .................... 33 JJL36250 ...................... 27 JJL36250C ................... 27 JJL36250CU31X .......... 28 JJL36250CU33X .......... 28 JJL36250CU43X .......... 28 JJL36250CU53X .......... 28 JJL36250M75 ............... 50 JJL36250T .................... 33 JJL36250TU31X ........... 34 JJL36250TU33X ........... 34 JJL36250TU43X ........... 34 JJL36250TU44X ........... 34 JJL36250TU53X ........... 34 JJL36250TU54X ........... 34 JJL36250U31X ............. 28 JJL36250U33X ............. 28 JJL36250U43X ............. 28 JJL36250U44X ............. 28 JJL36250U53X ............. 28 JJL36250U54X ............. 28 JLA34250WU31X ......... 32 JLA34250WU33X ......... 32 JLA34250WU43X ......... 32 JLA34250WU44X ......... 32 JLA34250WU53X ......... 32 JLA34250WU54X ......... 32 JLA36150 ..................... 31 JLA36175 ..................... 31 JLA36200 ..................... 31 JLA36225 ..................... 31 JLA36250 ..................... 31 JLA36250U31X ............ 32 JLA36250U33X ............ 32 JLA36250U43X ............ 32 JLA36250U44X ............ 32 JLA36250U53X ............ 32 JLA36250U54X ............ 32 JLF36000F25 ............... 35 JLL26150 ...................... 27 JLL26150C ................... 27 JLL26175 ...................... 27 JLL26175C ................... 27 JLL26200 ...................... 27 JLL26200C ................... 27 JLL26225 ...................... 27 JLL26225C ................... 27 JLL26250 ...................... 27 JLL26250C ................... 27 JLL34250WU31X ......... 29 JLL34250WU33X ......... 29 JLL34250WU43X ......... 29 JLL34250WU44X ......... 29 JLL34250WU53X ......... 29 JLL34250WU54X ......... 29 JLL36150 ...................... 27 232 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers JLL36150C ................... 27 JLL36150T .................... 33 JLL36175 ...................... 27 JLL36175C ................... 27 JLL36175T .................... 33 JLL36200 ...................... 27 JLL36200C ................... 27 JLL36200T .................... 33 JLL36225 ...................... 27 JLL36225C ................... 27 JLL36225T .................... 33 JLL36250 ...................... 27 JLL36250C ................... 27 JLL36250CU31X .......... 28 JLL36250CU33X .......... 28 JLL36250CU43X .......... 28 JLL36250CU53X .......... 28 JLL36250M75 ............... 50 JLL36250T .................... 33 JLL36250TU31X ........... 34 JLL36250TU33X ........... 34 JLL36250TU43X ........... 34 JLL36250TU44X ........... 34 JLL36250TU53X ........... 34 JLL36250TU54X ........... 34 JLL36250U31X ............. 28 JLL36250U33X ............. 28 JLL36250U43X ............. 28 JLL36250U44X ............. 28 JLL36250U53X ............. 28 JLL36250U54X ............. 28 JRA36150 ..................... 31 JRA36175 ..................... 31 JRA36200 ..................... 31 JRA36225 ..................... 31 JRA36250 ..................... 31 JRA36250U31X ............ 32 JRA36250U33X ............ 32 JRA36250U43X ............ 32 JRA36250U44X ............ 32 JRA36250U53X ............ 32 JRA36250U54X ............ 32 JRL36150 ..................... 27 JRL36150C ................... 27 JRL36175 ..................... 27 JRL36175C ................... 27 JRL36200 ..................... 27 JRL36200C ................... 27 JRL36225 ..................... 27 JRL36225C ................... 27 JRL36250 ..................... 27 JRL36250C ................... 27 JRL36250CU31X .......... 28 JRL36250CU33X .......... 28 JRL36250CU43X .......... 28 JRL36250CU53X .......... 28 JRL36250M75 .............. 50 JRL36250U31X ............ 28 JRL36250U33X ............ 28 JRL36250U43X ............ 28 JRL36250U44X ............ 28 JRL36250U53X ............ 28 JRL36250U54X ............ 28 JT3150 .......................... 34 JT3150 .......................... 61 JT3175 .......................... 34 JT3175 .......................... 61 JT3200 .......................... 34 JT3200 .......................... 61 JT3225 .......................... 34 JT3225 .......................... 61 JT3250 .......................... 34 JT3250 .......................... 61 LDA34250WU31X ........ 39 LDA34250WU33X ........ 39 LDA34400WU31X LDA34600WU31X ........ 39 LDA34400WU33X ........ 39 LDA34400WU43X ........ 39 LDA34400WU44X ........ 39 LDA34400WU53X ........ 39 LDA34400WU54X ........ 39 LDA34600WU33X ........ 39 LDA34600WU43X ........ 39 LDA34600WU44X ........ 39 LDA34600WU53X ........ 39 LDA34600WU54X ........ 39 LDA36250CU31X ......... 40 LDA36250CU33X ......... 40 LDA36250U31X ........... 39 LDA36250U33X ........... 39 LDA36400CU31X ......... 40 LDA36400CU33X ......... 40 LDA36400CU43X ......... 40 LDA36400CU44X ......... 40 LDA36400CU53X ......... 40 LDA36400CU54X ......... 40 LDA36400U31X LDA36600U31X ........... 39 LDA36400U33X ........... 39 LDA36400U43X ........... 39 LDA36400U44X ........... 39 LDA36400U53X ........... 39 LDA36400U54X ........... 39 LDA36600U33X ........... 39 LDA36600U43X ........... 39 LDA36600U44X ........... 39 LDA36600U53X ........... 39 LDA36600U54X ........... 39 LDF36000F25 .............. 41 LDF36000F40 .............. 41 LDF36000F60 .............. 41 LDL34250WU31X ........ 37 LDL34250WU33X ........ 37 LDL34400WU31X ........ 37 LDL34400WU33X ........ 37 LDL34400WU43X ........ 37 LDL34400WU44X ........ 37 LDL34400WU53X ........ 37 LDL34400WU54X ........ 37 LDL34600WU31X ........ 37 LDL34600WU33X ........ 37 LDL34600WU43X ........ 37 LDL34600WU44X ........ 37 LDL34600WU53X ........ 37 LDL34600WU54X ........ 37 LDL36250CU31X ......... 36 LDL36250CU33X ......... 36 LDL36250RU31X ......... 40 LDL36250RU33X ......... 40 LDL36250TU31X .......... 40 LDL36250TU33X .......... 40 LDL36250U31X ............ 36 LDL36250U33X ............ 36 LDL36400CU31X ......... 36 LDL36400CU33X ......... 36 LDL36400CU43X ......... 36 LDL36400CU44X ......... 36 LDL36400CU53X ......... 36 LDL36400CU54X ......... 36 LDL36400RU31X ......... 40 LDL36400RU33X ......... 40 LDL36400RU43X ......... 40 LDL36400RU44X ......... 40 LDL36400RU53X ......... 40 LDL36400RU54X ......... 40 LDL36400TU31X .......... 40 LDL36400TU33X .......... 40 LDL36400TU43X .......... 40 LDL36400TU44X .......... 40 LDL36400TU53X .......... 40 LDL36400TU54X .......... 40 LDL36400U31X ............ 36 LDL36400U33X ............ 36 LDL36400U43X ............ 36 LDL36400U44X ............ 36 LDL36400U53X ............ 36 LDL36400U54X ............ 36 LDL36600TU31X .......... 40 LDL36600TU33X .......... 40 LDL36600TU43X ..........40 LDL36600TU44X ..........40 LDL36600TU53X ..........40 LDL36600TU54X ..........40 LDL36600U31X ............36 LDL36600U33X ............36 LDL36600U43X ............36 LDL36600U44X ............36 LDL36600U53X ............36 LDL36600U54X ............36 LDL44250WU31X .........38 LDL44250WU33X .........38 LDL44400WU31X .........38 LDL44400WU33X .........38 LDL44400WU43X .........38 LDL44400WU44X .........38 LDL44400WU53X .........38 LDL44400WU54X .........38 LDL44600WU31X .........38 LDL44600WU33X .........38 LDL44600WU43X .........38 LDL44600WU44X .........38 LDL44600WU53X .........38 LDL44600WU54X .........38 LDL46250CU31X ..........38 LDL46250CU33X ..........38 LDL46250U31X ............38 LDL46250U33X ............38 LDL46400CU31X ..........38 LDL46400CU33X ..........38 LDL46400CU43X ..........38 LDL46400CU44X ..........38 LDL46400CU53X ..........38 LDL46400CU54X ..........38 LDL46400U31X ............38 LDL46400U33X ............38 LDL46400U43X ............38 LDL46400U44X ............38 LDL46400U53X ............38 LDL46400U54X ............38 LDL46600U31X ............38 LDL46600U33X ............38 LDL46600U43X ............38 LDL46600U44X ............38 LDL46600U53X ............38 LDL46600U54X ............38 LE3250U31X .................41 LE3250U31X .................68 LE3250U33X .................41 LE3250U33X .................68 LE3400U31X .................41 LE3400U31X .................68 LE3400U33X .................41 LE3400U33X .................68 LE3400U43X .................41 LE3400U43X .................69 LE3400U44X .................41 LE3400U44X .................69 LE3400U53X .................41 LE3400U53X .................69 LE3400U54X .................41 LE3400U54X .................69 LE3600U31X .................41 LE3600U31X .................68 LE3600U33X .................41 LE3600U33X .................68 LE3600U43X .................41 LE3600U43X .................69 LE3600U44X .................41 LE3600U44X .................69 LE3600U53X .................41 LE3600U53X .................69 LE3600U54X .................41 LE3600U54X .................69 LE4250U31X .................68 LE4250U33X .................68 LE4400U31X .................68 LE4400U33X .................68 LE4400U43X .................69 LE4400U44X .................69 LE4400U53X ................ 69 LE4400U54X ................ 69 LE4600U31X ................ 68 LE4600U33X ................ 68 LE4600U43X ................ 69 LE4600U44X ................ 69 LE4600U53X ................ 69 LE4600U54X ................ 69 LGA34250WU31X ........ 39 LGA34250WU33X ........ 39 LGA34400WU31X ........ 39 LGA34400WU33X ........ 39 LGA34400WU43X ........ 39 LGA34400WU44X ........ 39 LGA34400WU53X ........ 39 LGA34400WU54X ........ 39 LGA34600WU31X ........ 39 LGA34600WU33X ........ 39 LGA34600WU43X ........ 39 LGA34600WU44X ........ 39 LGA34600WU53X ........ 39 LGA34600WU54X ........ 39 LGA36000S40X ............ 45 LGA36000S60X ............ 45 LGA36250CU31X ......... 40 LGA36250CU33X ......... 40 LGA36250U31X ........... 39 LGA36250U33X ........... 39 LGA36400CU31X ......... 40 LGA36400CU33X ......... 40 LGA36400CU43X ......... 40 LGA36400CU44X ......... 40 LGA36400CU53X ......... 40 LGA36400CU54X ......... 40 LGA36400U31X ........... 39 LGA36400U33X ........... 39 LGA36400U43X ........... 39 LGA36400U44X ........... 39 LGA36400U53X ........... 39 LGA36400U54X ........... 39 LGA36600U31X ........... 39 LGA36600U33X ........... 39 LGA36600U43X ........... 39 LGA36600U44X ........... 39 LGA36600U53X ........... 39 LGA36600U54X ........... 39 LGF36000F25 .............. 41 LGF36000F40 .............. 41 LGF36000F60 .............. 41 LGL34250WU31X ........ 37 LGL34250WU33X ........ 37 LGL34400WU31X ........ 37 LGL34400WU33X ........ 37 LGL34400WU43X ........ 37 LGL34400WU44X ........ 37 LGL34400WU53X ........ 37 LGL34400WU54X ........ 37 LGL34600WU31X ........ 37 LGL34600WU33X ........ 37 LGL34600WU43X ........ 37 LGL34600WU44X ........ 37 LGL34600WU53X ........ 37 LGL34600WU54X ........ 37 LGL36000S40X ............ 45 LGL36000S60X ............ 45 LGL36250CU31X ......... 36 LGL36250CU33X ......... 36 LGL36250RU31X ......... 40 LGL36250RU33X ......... 40 LGL36250TU31X .......... 40 LGL36250TU33X .......... 40 LGL36250U31X ............ 36 LGL36250U33X ............ 36 LGL36400CU31X ......... 36 LGL36400CU33X ......... 36 LGL36400CU43X ......... 36 LGL36400CU44X ......... 36 LGL36400CU53X ......... 36 LGL36400CU54X ......... 36 LGL36400RU31X ......... 40 LGL36400RU33X ..........40 LGL36400RU43X ..........40 LGL36400RU44X ..........40 LGL36400RU53X ..........40 LGL36400RU54X ..........40 LGL36400TU31X ..........40 LGL36400TU33X ..........40 LGL36400TU43X ..........40 LGL36400TU44X ..........40 LGL36400TU53X ..........40 LGL36400TU54X ..........40 LGL36400U31X ............36 LGL36400U33X ............36 LGL36400U43X ............36 LGL36400U44X ............36 LGL36400U53X ............36 LGL36400U54X ............36 LGL36600TU31X ..........40 LGL36600TU33X ..........40 LGL36600TU43X ..........40 LGL36600TU44X ..........40 LGL36600TU53X ..........40 LGL36600TU54X ..........40 LGL36600U31X ............36 LGL36600U33X ............36 LGL36600U43X ............36 LGL36600U44X ............36 LGL36600U53X ............36 LGL36600U54X ............36 LGL44250WU31X .........38 LGL44250WU33X .........38 LGL44400WU31X .........38 LGL44400WU33X .........38 LGL44400WU43X .........38 LGL44400WU44X .........38 LGL44400WU53X .........38 LGL44400WU54X .........38 LGL44600WU31X .........38 LGL44600WU33X .........38 LGL44600WU43X .........38 LGL44600WU44X .........38 LGL44600WU53X .........38 LGL44600WU54X .........38 LGL46000S40X .............45 LGL46000S60X .............45 LGL46250CU31X ..........38 LGL46250CU33X ..........38 LGL46250U31X ............38 LGL46250U33X ............38 LGL46400CU31X ..........38 LGL46400CU33X ..........38 LGL46400CU43X ..........38 LGL46400CU44X ..........38 LGL46400CU53X ..........38 LGL46400CU54X ..........38 LGL46400U31X ............38 LGL46400U33X ............38 LGL46400U43X ............38 LGL46400U44X ............38 LGL46400U53X ............38 LGL46400U54X ............38 LGL46600U31X ............38 LGL46600U33X ............38 LGL46600U43X ............38 LGL46600U44X ............38 LGL46600U53X ............38 LGL46600U54X ............38 LJA34250WU31X ..........39 LJA34250WU33X ..........39 LJA34400WU31X ..........39 LJA34400WU33X ..........39 LJA34400WU43X ..........39 LJA34400WU44X ..........39 LJA34400WU53X ..........39 LJA34400WU54X ..........39 LJA34600WU31X ..........39 LJA34600WU33X ..........39 LJA34600WU43X ..........39 LJA34600WU44X ..........39 LJA34600WU53X ..........39 233 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers LJA34600WU54X ......... 39 LJA36250CU31X .......... 40 LJA36250CU33X .......... 40 LJA36250U31X ............. 39 LJA36250U33X ............. 39 LJA36400CU31X .......... 40 LJA36400CU33X .......... 40 LJA36400CU43X .......... 40 LJA36400CU44X .......... 40 LJA36400CU53X .......... 40 LJA36400CU54X .......... 40 LJA36400U31X ............. 39 LJA36400U33X ............. 39 LJA36400U43X ............. 39 LJA36400U44X ............. 39 LJA36400U53X ............. 39 LJA36400U54X ............. 39 LJA36600U31X ............. 39 LJA36600U33X ............. 39 LJA36600U43X ............. 39 LJA36600U44X ............. 39 LJA36600U53X ............. 39 LJA36600U54X ............. 39 LJF36000F25 ................ 41 LJF36000F40 ................ 41 LJF36000F60 ................ 41 LJL34250WU31X .......... 37 LJL34250WU33X .......... 37 LJL34400WU31X .......... 37 LJL34400WU33X .......... 37 LJL34400WU43X .......... 37 LJL34400WU44X .......... 37 LJL34400WU53X .......... 37 LJL34400WU54X .......... 37 LJL34600WU31X .......... 37 LJL34600WU33X .......... 37 LJL34600WU43X .......... 37 LJL34600WU44X .......... 37 LJL34600WU53X .......... 37 LJL34600WU54X .......... 37 LJL36250CU31X .......... 36 LJL36250CU33X .......... 36 LJL36250RU31X .......... 40 LJL36250RU33X .......... 40 LJL36250TU31X ........... 40 LJL36250TU33X ........... 40 LJL36250U31X ............. 36 LJL36250U33X ............. 36 LJL36400CU31X .......... 36 LJL36400CU43X .......... 36 LJL36400CU44X .......... 36 LJL36400CU53X .......... 36 LJL36400CU54X .......... 36 LJL36400RU31X .......... 40 LJL36400RU33X .......... 40 LJL36400RU43X .......... 40 LJL36400RU44X .......... 40 LJL36400RU53X .......... 40 LJL36400RU54X .......... 40 LJL36400TU31X ........... 40 LJL36400TU33X ........... 40 LJL36400TU43X ........... 40 LJL36400TU44X ........... 40 LJL36400TU53X ........... 40 LJL36400TU54X ........... 40 LJL36400U31X ............. 36 LJL36400U33X ............. 36 LJL36400U43X ............. 36 LJL36400U44X ............. 36 LJL36400U53X ............. 36 LJL36400U54X ............. 36 LJL3640C0U33X .......... 36 LJL36600TU31X ........... 40 LJL36600TU33X ........... 40 LJL36600TU43X ........... 40 LJL36600TU44X ........... 40 LJL36600TU53X ........... 40 LJL36600TU54X ........... 40 LJL36600U31X ............. 36 LJL36600U33X ............. 36 LJL36600U43X ............. 36 LJL36600U44X ............. 36 LJL36600U53X ............. 36 LJL36600U54X ............. 36 LJL44250WU31X ......... 38 LJL44250WU33X ......... 38 LJL44400WU31X ......... 38 LJL44400WU33X ......... 38 LJL44400WU43X ......... 38 LJL44400WU44X ......... 38 LJL44400WU53X ......... 38 LJL44400WU54X ......... 38 LJL44600WU31X ......... 38 LJL44600WU33X ......... 38 LJL44600WU43X ......... 38 LJL44600WU44X ......... 38 LJL44600WU53X ......... 38 LJL44600WU54X ......... 38 LJL46250CU31X .......... 38 LJL46250CU33X .......... 38 LJL46250U31X ............. 38 LJL46250U33X ............. 38 LJL46400CU31X .......... 38 LJL46400CU33X .......... 38 LJL46400CU43X .......... 38 LJL46400CU44X .......... 38 LJL46400CU53X .......... 38 LJL46400CU54X .......... 38 LJL46400U31X ............. 38 LJL46400U33X ............. 38 LJL46400U43X ............. 38 LJL46400U44X ............. 38 LJL46400U53X ............. 38 LJL46400U54X ............. 38 LJL46600U31X ............. 38 LJL46600U33X ............. 38 LJL46600U43X ............. 38 LJL46600U44X ............. 38 LJL46600U53X ............. 38 LJL46600U54X ............. 38 LLA34250WU31X ......... 39 LLA34250WU33X ......... 39 LLA34400WU31X ......... 39 LLA34400WU33X ......... 39 LLA34400WU43X ......... 39 LLA34400WU44X ......... 39 LLA34400WU53X ......... 39 LLA34400WU54X ......... 39 LLA34600WU31X ......... 39 LLA34600WU33X ......... 39 LLA34600WU43X ......... 39 LLA34600WU44X ......... 39 LLA34600WU53X ......... 39 LLA34600WU54X ......... 39 LLA36000S40X ............ 45 LLA36000S60X ............ 45 LLA36250CU31X ......... 40 LLA36250CU33X ......... 40 LLA36250U31X ............ 39 LLA36250U33X ............ 39 LLA36400CU31X ......... 40 LLA36400CU33X ......... 40 LLA36400CU43X ......... 40 LLA36400CU44X ......... 40 LLA36400CU53X ......... 40 LLA36400CU54X ......... 40 LLA36400U31X ............ 39 LLA36400U33X ............ 39 LLA36400U43X ............ 39 LLA36400U44X ............ 39 LLA36400U53X ............ 39 LLA36400U54X ............ 39 LLA36600U31X ............ 39 LLA36600U33X ............ 39 LLA36600U43X ............ 39 LLA36600U44X ............ 39 LLA36600U53X ............ 39 LLA36600U54X ............ 39 LLF36000F25 ............... 41 LLF36000F40 ............... 41 LLF36000F60 ................41 LLL34250WU31X ..........37 LLL34250WU33X ..........37 LLL34400WU31X ..........37 LLL34400WU33X ..........37 LLL34400WU43X ..........37 LLL34400WU44X ..........37 LLL34400WU53X ..........37 LLL34400WU54X ..........37 LLL34600WU31X ..........37 LLL34600WU33X ..........37 LLL34600WU43X ..........37 LLL34600WU44X ..........37 LLL34600WU53X ..........37 LLL34600WU54X ..........37 LLL36000S40X .............45 LLL36000S60X .............45 LLL36250CU31X ..........36 LLL36250CU33X ..........36 LLL36250RU31X ..........40 LLL36250RU33X ..........40 LLL36250TU31X ...........40 LLL36250TU33X ...........40 LLL36250U31X .............36 LLL36250U33X .............36 LLL36400CU31X ..........36 LLL36400CU33X ..........36 LLL36400CU43X ..........36 LLL36400CU44X ..........36 LLL36400CU53X ..........36 LLL36400CU54X ..........36 LLL36400RU31X ..........40 LLL36400RU33X ..........40 LLL36400RU43X ..........40 LLL36400RU44X ..........40 LLL36400RU53X ..........40 LLL36400RU54X ..........40 LLL36400TU31X ...........40 LLL36400TU33X ...........40 LLL36400TU43X ...........40 LLL36400TU44X ...........40 LLL36400TU53X ...........40 LLL36400TU54X ...........40 LLL36400U31X .............36 LLL36400U33X .............36 LLL36400U43X .............36 LLL36400U44X .............36 LLL36400U53X .............36 LLL36400U54X .............36 LLL36600TU31X ...........40 LLL36600TU33X ...........40 LLL36600TU43X ...........40 LLL36600TU44X ...........40 LLL36600TU53X ...........40 LLL36600TU54X ...........40 LLL36600U31X .............36 LLL36600U33X .............36 LLL36600U43X .............36 LLL36600U44X .............36 LLL36600U53X .............36 LLL36600U54X .............36 LLL44250WU31X ..........38 LLL44250WU33X ..........38 LLL44400WU31X ..........38 LLL44400WU33X ..........38 LLL44400WU43X ..........38 LLL44400WU44X ..........38 LLL44400WU53X ..........38 LLL44400WU54X ..........38 LLL44600WU31X ..........38 LLL44600WU33X ..........38 LLL44600WU43X ..........38 LLL44600WU44X ..........38 LLL44600WU53X ..........38 LLL44600WU54X ..........38 LLL46000S40X .............45 LLL46000S60X .............45 LLL46250CU31X ..........38 LLL46250CU33X ..........38 LLL46250U31X .............38 LLL46250U33X ............. 38 LLL46400CU31X .......... 38 LLL46400CU33X .......... 38 LLL46400CU43X .......... 38 LLL46400CU44X .......... 38 LLL46400CU53X .......... 38 LLL46400CU54X .......... 38 LLL46400U31X ............. 38 LLL46400U33X ............. 38 LLL46400U43X ............. 38 LLL46400U44X ............. 38 LLL46400U53X ............. 38 LLL46400U54X ............. 38 LLL46600U31X ............. 38 LLL46600U33X ............. 38 LLL46600U43X ............. 38 LLL46600U44X ............. 38 LLL46600U53X ............. 38 LLL46600U54X ............. 38 LRA36000S40X ............ 45 LRA36000S60X ............ 45 LRA36250CU31X ......... 40 LRA36250CU33X ......... 40 LRA36250U31X ............ 39 LRA36250U33X ............ 39 LRA36400CU31X ......... 40 LRA36400CU33X ......... 40 LRA36400CU43X ......... 40 LRA36400CU44X ......... 40 LRA36400CU53X ......... 40 LRA36400CU54X ......... 40 LRA36400U31X ............ 39 LRA36400U33X ............ 39 LRA36400U43X ............ 39 LRA36400U44X ............ 39 LRA36400U53X ............ 39 LRA36400U54X ............ 39 LRA36600U31X ............ 39 LRA36600U33X ............ 39 LRA36600U43X ............ 39 LRA36600U44X ............ 39 LRA36600U53X ............ 39 LRA36600U54X ............ 39 LRL36000S40X ............ 45 LRL36000S60X ............ 45 LRL36250CU31X .......... 36 LRL36250CU33X .......... 36 LRL36250U31X ............ 36 LRL36250U33X ............ 36 LRL36400CU31X .......... 36 LRL36400CU33X .......... 36 LRL36400CU43X .......... 36 LRL36400CU44X .......... 36 LRL36400CU53X .......... 36 LRL36400CU54X .......... 36 LRL36400U31X ............ 36 LRL36400U33X ............ 36 LRL36400U43X ............ 36 LRL36400U44X ............ 36 LRL36400U53X ............ 36 LRL36400U54X ............ 36 LRL36600U31X ............ 36 LRL36600U33X ............ 36 LRL36600U43X ............ 36 LRL36600U44X ............ 36 LRL36600U53X ............ 36 LRL36600U54X ............ 36 LRL46000S40X ............ 45 LRL46000S60X ............ 45 LRL46250CU31X .......... 38 LRL46250CU33X .......... 38 LRL46250U31X ............ 38 LRL46250U33X ............ 38 LRL46400CU31X .......... 38 LRL46400CU33X .......... 38 LRL46400CU43X .......... 38 LRL46400CU44X .......... 38 LRL46400CU53X .......... 38 LRL46400CU54X .......... 38 LRL46400U31X ............ 38 LRL46400U33X ............ 38 LRL46400U43X ............ 38 LRL46400U44X ............ 38 LRL46400U53X ............ 38 LRL46400U54X ............ 38 LRL46600U31X ............ 38 LRL46600U33X ............ 38 LRL46600U43X ............ 38 LRL46600U44X ............ 38 LRL46600U53X ............ 38 LRL46600U54X ............ 38 MICROTUSEAL ......... 113 MICROTUSEAL ........... 69 PDC12DG4L3 ............ 126 PDC3HD2 ................... 126 PDC3HD2 ................... 128 PDC3JD2 ................... 128 PDC3JD20 ................. 126 PDC5DG20L3 ............ 126 PDC6HD6 ................... 126 PDC6HD6 ................... 128 PDC6JD4 ................... 126 PDC6JD4 ................... 128 S29272 ....................... 122 S29273 ....................... 122 S29273 ....................... 122 S29273 ....................... 122 S29274 ....................... 122 S29274 ....................... 122 S29275 ....................... 122 S29275 ....................... 122 S29278 ....................... 122 S29278 ....................... 122 S29282 ....................... 122 S29283 ....................... 122 S29284 ....................... 114 S29284 ....................... 122 S29284 ....................... 122 S29286 ....................... 122 S29286 ....................... 122 S29287 ....................... 122 S29287 ....................... 122 S29287 ....................... 122 S29313 ....................... 114 S29315 ....................... 113 S29317 ....................... 113 S29319 ....................... 114 S29375 ....................... 113 S29382 ....................... 101 S29383 ....................... 101 S29384 ....................... 101 S29385 ....................... 101 S29386 ....................... 101 S29387 ....................... 101 S29388 ....................... 101 S29389 ....................... 101 S29390 ....................... 101 S29391 ....................... 101 S29392 ....................... 101 S29393 ....................... 101 S29394 ....................... 101 S29402 ....................... 101 S29403 ....................... 101 S29404 ....................... 101 S29405 ....................... 101 S29406 ....................... 101 S29407 ....................... 101 S29408 ....................... 101 S29409 ....................... 101 S29410 ....................... 101 S29411 ....................... 101 S29412 ....................... 101 S29413 ....................... 101 S29414 ....................... 101 S29433 ....................... 103 S29434 ....................... 103 S29435 ....................... 103 S29436 ....................... 103 S29437 ....................... 103 S29438 ....................... 103 234 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Catalog Numbers S29439 ....................... 103 S29440 ....................... 103 S29450 ......................... 98 S29450 ......................... 98 S29452 ......................... 98 S29452 ......................... 98 S31540 ....................... 103 S31541 ....................... 103 S31542 ....................... 103 S31543 ....................... 103 S31544 ....................... 103 S31545 ....................... 103 S31546 ....................... 103 S31548 ....................... 103 S32477 ....................... 123 S32478 ....................... 123 S32514 ....................... 122 S32514 ....................... 122 S32515 ....................... 122 S32515 ....................... 122 S32523 ....................... 122 S32525 ....................... 122 S32532 ....................... 122 S32533 ....................... 122 S32534 ....................... 114 S32534 ....................... 122 S32558 ....................... 113 S32560 ....................... 114 S32562 ....................... 122 S32562 ....................... 122 S32562 ....................... 123 S32563 ....................... 122 S32563 ....................... 122 S32563 ....................... 123 S32648 ....................... 103 S32649 ....................... 103 S36967 ....................... 123 S36967 ....................... 125 S37420 ....................... 103 S37420 ....................... 103 S37423 ....................... 124 S37423 ....................... 124 S37424 ....................... 124 S37424 ....................... 124 S37425 ....................... 125 S37426 ....................... 125 S37427 ....................... 125 S37428 ....................... 125 S37429 ....................... 124 S37430 ....................... 124 S37432 ....................... 123 S37433 ....................... 123 S37434 ....................... 123 S37436 ....................... 122 S37436 ....................... 123 S37437 ....................... 123 S37438 ....................... 123 S37439 ....................... 123 S37440 ....................... 122 S37440 ....................... 123 S37442 ....................... 122 S37443 ....................... 122 S37444 ....................... 125 S37445 ....................... 125 S37446 ....................... 128 S37447 ....................... 128 S37448 ....................... 128 S37449 ....................... 128 S37450 ....................... 128 S41940 ....................... 103 S41940 ....................... 103 S41940 ....................... 103 S42888 ....................... 103 S42888 ....................... 103 S42888 ....................... 103 S429424 ..................... 100 S429441 ..................... 103 S429449 ..................... 103 S429449 ..................... 103 S429478 ....................... 69 S429481 ....................... 69 S429483 ....................... 69 S429484 ....................... 69 S429521 ....................... 92 S429532 ..................... 100 S430562 ....................... 92 S430563 ....................... 92 S431549 ..................... 103 S432459 ....................... 69 S432461 ....................... 69 S432475 ..................... 123 S432476 ..................... 123 S432553 ..................... 114 S432575 ....................... 92 S432639 ..................... 103 S432640 ..................... 103 S432641 ..................... 103 S432642 ..................... 103 S432643 ..................... 103 S432644 ..................... 103 S432645 ..................... 103 S432646 ..................... 103 S432647 ..................... 103 S432652 ..................... 103 S434201 ....................... 82 S434201BS .................. 83 S434202 ....................... 82 S434202BS .................. 83 S434204 ....................... 82 S434204BS .................. 83 S434205 ....................... 83 S434206 ....................... 84 S434210 ....................... 83 S434212 ....................... 92 S434300 ....................... 93 S434301 ....................... 93 S434302 ....................... 93 S434303 ....................... 82 S434303BS .................. 83 S434500 ....................... 93 S434501 ....................... 93 S434502 ....................... 93 S434503 ....................... 93 S434504 ....................... 93 S434505 ....................... 93 S434506 ....................... 93 S434507 ....................... 93 S434508 ....................... 93 SN100FA .................... 116 SN100FA .................... 116 SN400LA .................... 116 SN400LA .................... 116 SN400LA .................... 116 SN400LA .................... 116 STRV00121 .................. 79 STRV00210 .................. 81 STRV00211 .................. 81 STRV00910 .................. 85 STRV00911 .................. 85 TCSWAAC13FB ........... 85 TRV00128 .................... 79 TRV00217 .................... 81 TRV00803 .................... 86 TRV00806 .................... 86 TRV00810 .................... 86 TRV00820 .................... 86 TRV00830 .................... 86 TRV00850 .................... 86 TRV00870 .................... 86 TRV00880 .................... 86 TRV00915 .................... 85 TRV00917 .................... 85 VW3A8306DRC ........... 86 YA060HD ................... 127 YA060HD ................... 128 YA150HD ................... 127 YA150HD ................... 128 YA150JD .................... 127 YA150JD .................... 128 YA250J35 ................... 127 YA400L31K3 YA400L51K3 YA400L51K4 YA400L71K3 YA400L71K4 YA600L32K3 YA600L32K4 YA600L52K3 YA600L52K4 ...............127 ...............127 ...............127 ...............127 ...............127 ...............127 ...............127 ...............127 ...............127 235 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary Glossary accessory = An electrical or mechanical device that performs a secondary or minor function apart from overcurrent protection. accessory cover = A removable cover on the front of a circuit breaker behind which are mounted the trip unit and all electrical accessories. adjustable rating plug = A component which plugs into the trip unit, establishing the ampere rating of the circuit breaker AIC = Amperes interrupting capacity. AIR = See amperes interrupting rating. alarm switch (bell alarm) = See overcurrent trip switch. ambient temperature rating = Temperature at which the continuous current rating (handle rating) of a circuit breaker is based; the temperature of the air immediately surrounding the circuit breaker which can affect the thermal (overload) tripping characteristics of thermal-magnetic circuit breakers. Electronic trip circuit breakers, however, are insensitive to normal (-10° to 50°C) ambient conditions. ammeter (local current meter) = A module that mounts directly to the circuit breaker trip unit and reports RMS phase and ground-fault current values as seen by the trip unit. Current values are displayed one phase at a time. ampacity = The current, in amperes, that a conductor or circuit breaker can carry continuously under the conditions of use without exceeding its temperature rating. ampere = The equivalent of one coulomb per second or the steady current produced by one volt applied across a resistance of one ohm. amperes interrupting rating = The highest current at rated voltage that an overcurrent protective device is intended to interrupt under specified test conditions (NEC). ANCE (National Association of Standardization and Certification for the Electrical Sector) = The standards and certification agency accredited by the Mexican government. ANSI® = American National Standards Institute. automatic molded case switch = A switch with construction similar to a molded case circuit breaker except that the switch opens only instantaneously at a non-adjustable trip point calibrated to protect only the molded case switch itself. auxiliary switch = A switch mechanically operated by the main device for signaling, interlocking, or other purposes. bell alarm = A mechanically-operated switch used to indicate the main contact position of a circuit breaker, which indicates when a circuit breaker has tripped. Also see overcurrent trip switch. BPFE = See electrical closing push button. branch circuit = The circuit between the final overcurrent device protecting the circuit and the outlet(s). BCM = See circuit breaker communications module. Canadian Standards Association® (CSA®) = Canadian product safety testing and certification organization. carriage= See cradle. CCM = See cradle communication module. CD = See cell switch. CDM = See mechanical operation counter. CE = See cell switch. 236 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary cell switch = A switch which indicates the position of a drawout circuit breaker in relation to the cradle. — CD = Disconnected position cell switch. — CE = Connected position cell switch. — CT = Test position cell switch. CH = A spring-charged contact inside of the spring charging motor on insulated-case and low-voltage power circuit breakers. charging handle= See spring charging handle. circuit breaker = A device designed to open and close a circuit by non-automatic means and to open the circuit automatically on an overcurrent without damage to itself when properly applied within its rating. circuit breaker communications module (BCM) = A module which, when installed in a circuit breaker, receives and transmits information on the communication network. circuit breaker frame = (1) The circuit breaker housing which contains the current carrying components, the current sensing components, and the tripping and operating mechanism. (2) That portion of an interchangeable trip molded case circuit breaker remaining when the interchangeable trip unit is removed. close button = A button for manually closing the main contacts after the closing springs are charged. close button cover = A cover which fits over the close button and blocks access to it. Access to the close button may be permitted through the use of a tool or rod inserted through a small hole in the front of the close button cover. closing coil (shunt close) = A coil which closes the circuit breaker electrically using an external voltage source when a specified voltage is applied across the coil. coil clearing switch = A mechanically-operated switch in series with the coil of a shunt trip device which breaks the coil current when the circuit breaker opens. communication network = A network allowing the flow of information between electrical components, comprised of programmable controller interface units, protocol software and modems. conductor = A substance or body that allows a current of electricity to pass continuously along it. continuous current rating (handle rating) (ampere rating) = The designated RMS alternating or direct current in amperes which a device or assembly will carry continuously in free air without tripping or exceeding temperature limits. continuous load = A load where the maximum current on the circuit is expected to continue. cradle communications module (CCM) = An external module which allows addressing of the cradle and retention of the address when the drawout circuit breaker is in the disconnected position and which is used to transmit information about the position of the circuit breaker in the cradle to the communication network. cradle compartment = A compartment containing all connectors, shields, adapters, barriers, spreaders, shutters, keys and interlocking devices for a drawout circuit breaker. CSA® = See Canadian Standards Association. CT = Current transformer. See also cell switch. current path (of a circuit breaker) = The current-carrying conductors within a circuit breaker between, and including, line and load terminations. current transformer (current sensor) (CT) = An instrument to measure current, encircling a conductor carrying the current to be measured or controlled. demand metering = The metering of power or current demand seen by a circuit breaker. It is calculated over a fixed or sliding time window that can be programmed from five to 60 minutes. Depending on the contract signed with the power supplier, specific programming makes it possible to avoid or minimize the cost of overrunning the subscribed power. Maximum demand values are systematically stored and time stamped. disconnecting contacts = See main disconnecting contacts and secondary disconnecting contacts. 237 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary drawout circuit breaker = An assembly of a circuit breaker and a supporting structure (cradle) so constructed that the circuit breaker is supported and can be moved to either the main circuit connected or disconnected position without removing connections or mounting supports. drawout mechanism = A mechanism which engages the drawout cradle assembly and draws the circuit breaker into or out of the equipment. The drawout mechanism includes the drawout mechanism shaft, drawout levering device arms and a drawout position indicator. drawout position indicator = An indicating means which shows the position of the circuit breaker in the drawout structure. drawout access cover (drawout shaft cover) = A shutter which allows or restricts access to the drawout shaft. electrical closing push button (BPFE) = A push button used to electrically close a circuit breaker using a shunt close with communication option. This takes into account all safety functions that are part of the control and monitoring system of the installation. electrical operator (motor operator) = An electrical device used to open and close a circuit breaker or switch and reset a circuit breaker. See also spring charging motor. electronic trip circuit breaker = A circuit breaker which uses current sensors and electronic circuitry to sense, measure and respond to current levels. fixed-mounted circuit breaker = A circuit breaker so mounted that it cannot be removed without removing primary and sometimes secondary connections and/or mounting supports. frame size = The largest ampere rating available in a group of circuit breakers of similar physical configuration. frequency = The number of cycles per second for an alternating current system. frequency rating = The range of frequencies within which a product can be applied. ground fault = An unintentional current path, through ground, back to the source. ground-fault delay = The length of time the circuit breaker trip unit will delay before initiating a trip signal to the circuit breaker after a ground fault has been detected. ground-fault module = An electronic accessory used in combination with thermal-magnetic circuit breakers to provide branch circuit ground-fault protection and ground-fault indication. ground-fault pickup = The level of ground-fault current at which the trip system begins timing. handle rating = Continuous current rating. IDMTL = Long-time delay curve which can be varied in slope to enhance selectivity. IEC® = International Electrotechnical Commission. IEEE® = Institute of Electrical and Electronics Engineers. Ig = See ground-fault pickup. Ii = See instantaneous pickup. In = See sensor rating. individually-mounted circuit breaker = A circuit breaker so mounted that it cannot be removed without removing primary and sometimes secondary connections and/or mounting supports. instantaneous pickup = The current level at which the circuit breaker will trip with no intentional time delay. instantaneous trip = A qualifying term indicating that no delay is purposely introduced in the tripping action of the circuit breaker during short-circuit conditions. insulated case circuit breaker (ICCB) = UL Standard 489 Listed non-fused molded case circuit breakers which utilize a two-step stored energy closing mechanism, electronic trip system and drawout construction. 238 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary integral ground-fault protection for equipment = Equipment ground-fault protection on grounded neutral systems provided by components internal to the circuit breaker. interchangeable trip unit = A trip unit which can be interchanged by a user among circuit breaker frames of the same design. interrupting rating = The highest current at rated voltage available at the incoming terminals of the circuit breaker. When the circuit breaker can be used at more than one voltage, the interrupting rating will be shown on the circuit breaker for each voltage level. The interrupting rating of a circuit breaker must be equal to or greater than the available short-circuit current at the point at which the circuit breaker is applied to the system. inverse time = A qualifying term indicating there is purposely introduced a delay in the tripping action of the circuit breaker, which delay decreases as the magnitude of the current increases. Ir = See long-time pickup. Isd = See short-time pickup. I2t = See let-through current. I2 t IN (I2 t ON) = An inverse time delay characteristic. I2 t OUT (I2 t OFF) = A constant time delay characteristic. latch check switch = A mechanically-operated switch which senses if the trip latch is reset. let-through current = The peak current (measured in amperes) which passes through an overcurrent protective device during an interruption. let-through I2t = An expression related to energy (measured in ampere-squared seconds) which passes through an overcurrent protective device during an interruption. LI = A combination of adjustable trip functions including long-time ampere rating, long-time delay, and instantaneous pickup. lifting adapter = A device used with a crane, chain block or an optional lifting mechanism supplied with switchgear for removing and installing a drawout circuit breaker or fuse truck. LIG = A combination of adjustable trip functions including long-time ampere rating, long-time delay, instantaneous pickup, ground-fault pickup and ground-fault delay. limit switch = A switch mechanically operated by a device. local current meter = An ammeter installed as part of the trip unit. long-time ampere rating = An adjustment which, in combination with the installed rating plug, establishes the continuous current rating of a full-function electronic trip circuit breaker. long-time delay = The length of time the circuit breaker will carry a sustained overcurrent (greater than the long-time pickup) before initiating a trip signal. long-time pickup = The current level at which the circuit breaker long-time delay function begins timing. low voltage power circuit breaker (LVPCB) = A circuit breaker tested to the ANSI C37 Standards with a two-step stored-energy mechanism, an electronic trip system, and drawout construction. LS = A combination of adjustable trip functions including long-time ampere rating, long-time delay, short-time pickup, short-time delay and a defeatable instantaneous pickup. LSG = A combination of adjustable trip functions including long-time ampere rating, long-time delay, short-time pickup, short-time delay, defeatable instantaneous pickup, ground-fault pickup and groundfault delay. LSI = A combination of adjustable trip functions including long-time ampere rating, long-time delay, short-time pickup, short-time delay and defeatable instantaneous pickup. LSIG = A combination of adjustable trip functions including long-time ampere rating, long-time delay, short-time pickup, short-time delay, defeatable instantaneous pickup, ground-fault pickup and groundfault delay. 239 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary main disconnecting contacts = Spring-loaded and self-aligning contact on the rear of a drawout circuit breaker that provide positive electrical contact when the circuit breaker is in the connected position. Masterpact™ = The family of universal power circuit breakers including insulated case circuit breakers and low-voltage power circuit breakers. MCH = See spring-charging motor. MDGF = Modified differential ground-fault system. manual charging handle = A manually-operated handle which charges the circuit breaker closing springs. mechanical operation counter (CDM) = A mechanical device which indicates the total number of circuit breaker operating cycles. Micrologic™ = The family of electronic trip systems available on molded case circuit breakers, insulated case circuit breakers and low-voltage power circuit breakers. miniature circuit breaker (MCB) = A small circuit breaker which is assembled as an integral unit in a supportive and enclosed housing of insulating material, rated 150 A or less and used in 120 V, 120/240 V, 240 V and 480Y/277 V ac systems and dc systems up to 125 Vdc. MN = See undervoltage release. Modbus™ communication network = A communication network comprised of programmable controller interface units, protocol software and modems. molded case circuit breaker (MCCB) = A circuit breaker which is assembled as an integral unit in a supportive and enclosed housing of insulating material, generally 20 to 3000 A in size and used in systems up to 600 Vac and 500 Vdc. motor circuit protector = A recognized component of construction similar to a circuit breaker except with no thermal elements so that it provides short-circuit protection only. MX = See shunt trip. National Association of Standardization and Certification for the Electrical Sector = See ANCE. neutral current transformer = A current transformer which encircles the neutral conductor; required on circuit breakers with ground-fault protection, when applied on a grounded system. NMX® (Norma Mexicana X) = Listing mark indicating certification to non-mandatory Mexican safety standards. NOM = Listing mark indicating certification to mandatory Mexican safety standards OF = See auxiliary switch. open/closed indicator = An indicating means which displays the position (open or closed) of the main contacts. operating mechanism = An internal mechanical system which opens and closes the circuit breaker contacts. OTS = Overcurrent trip switch (alarm switch, bell alarm). A mechanical switch that operates when the circuit breaker is tripped by the trip system. overcurrent = Any current in excess of the rated continuous current of equipment or the ampacity of a conductor. overcurrent mechanism = An internal mechanical system which trips the circuit breaker during an overcurrent. overcurrent trip element = A device which detects an overcurrent and transmits the energy necessary to open the circuit automatically (UL only). overcurrent trip switch (SDE) = A mechanically-operated switch which indicates when a circuit breaker has tripped due to overcurrent conditions. 240 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary overload delay = The length of time the circuit breaker will carry a sustained low-level overcurrent before initiating a trip signal. peak current sensing = A method of determining the current by means of detecting the current peaks. peak let-through current = The maximum peak current flowing in a circuit during an overcurrent condition. PF = A switch used to indicate a circuit breaker is ready to close. phase barrier = A barrier which provides phase-to-phase or phase-to-ground isolation. PowerLogic™ = The family of electronic circuit monitoring systems available on molded case circuit breakers, insulated case circuit breakers and low-voltage power circuit breakers. Power-Zone™ = The family of low-voltage and medium-voltage switchgear. programmable contact module (M6C and M2C) = A programmable module which indicates the type of fault and the instantaneous and delayed threshold overruns. It may be programmed with instantaneous return to the initial state, without return to the initial state, or with return to the initial state following a delay. primary disconnect contacts = An electrical plug-on connector in the main current path between the drawout components and the cradle mounted in the equipment. push-to-close button = A button for manually closing the main contacts after the closing springs are charged. push-to-open button = A button for manually opening the circuit breaker. push-to-trip button = A button for manually tripping the circuit breaker. racking device shutter = See drawout shaft cover. racking interlock = An interlock to prevent racking of a drawout circuit breaker when the enclosure door is open by not allowing the racking crank to be inserted into the circuit breaker. rating plug = A component which plugs into the full-function electronic trip unit, establishing the maximum continuous current rating of the circuit breaker. remote reset after fault (RES) = A component which resets the overcurrent trip switch (SDE) and the mechanical operator after tripping. RES = See remote reset after fault. residual ground-fault sensing = A means of providing equipment ground-fault protection utilizing sensors on each individual phase. restraint interface module (RIM) = A component which allows zone-selective interlocking communication between Square D™ full-function electronic trip systems, add-on ground-fault modules and zero-sequence ground-fault relays. RIM = Restraint interface module. RMS = Root-mean-square. RMS current sensing = A method of determining the true RMS current of sinusoidal and non-sinusoidal waveforms by sampling the current waveform a number of times per cycle, then calculating the true RMS value. safety shutter = A device that closes to block access to the main disconnects when the circuit breaker is in the disconnected, test or withdrawn position. SDE = See overcurrent trip switch. secondary disconnect contacts = An electrical plug-on connector in the secondary (control) circuit between a drawout circuit breaker and its cradle in the equipment. sensor = The current sensing element within the circuit breaker which provides the sensing function for that circuit breaker. sensor plug = A component used with a Micrologic trip system to set the sensor size of a circuit breaker. 241 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary sensor size = Maximum ampere rating possible for a specific circuit breaker, based on the size of the current sensor inside the circuit breaker. Sensor size is less than or equal to frame size. SGR = Source ground return system. short-circuit delay (STD) = The length of time the circuit breaker will carry a short circuit (current greater than the short-circuit pickup) before initiating a trip signal. short-circuit pickup = The current level at which the circuit breaker short-circuit delay function begins timing. short-time delay = The length of time the circuit breaker will carry a short circuit (current greater than the short-time pickup) before initiating a trip signal. short-time pickup = The current level at which the circuit breaker short-time delay function begins timing. shunt close (closing coil) (XF) = An accessory which closes the circuit breaker from a remote location using an external voltage source. shunt trip (MX) = An accessory which trips the circuit breaker from a remote location using an external voltage source. spring-charging handle = A handle located on the front of the circuit breaker used to manually charge the stored energy mechanism. spring charging motor = A motor which electrically charges the stored energy closing spring(s). STD = Short-time delay. stored energy mechanism (SEM) = A spring mechanism that is compressed or “charged” and then released or “discharged” to close the circuit breaker. terminal block = The connections for control wiring. tg = See ground-fault delay. thermal imaging = A trip unit function that accurately maps the heating and cooling effects of load behavior on rated conductors to provide thermal protection without nuisance tripping. thermal-magnetic circuit breaker = A general purpose term for circuit breakers that use bimetals and electromagnetic assemblies to provide both thermal and magnetic overcurrent protection. thermal memory = Provides continuous temperature rise status of the wiring for a period of time both before and after the device trips. This allows the circuit breaker to respond to a series of overload conditions which would otherwise go undetected. tr = See long-time delay. tsd = See short-time delay. two-step stored energy mechanism = See stored energy mechanism. transformer = A static device with primary winding, connected in series with the conductor (bus) carrying the current to be measured or controlled within the switchgear. trip button = See push-to-trip button. trip curve = A graphical representation of the response of a circuit breaker to current over a period of time. trip indicator = A module that mounts directly to the circuit breaker trip unit that displays whether the circuit breaker tripped due to an overload, a short-circuit or a ground-fault condition. trip indicator reset = A button on the trip indicator module used to reset the trip indicator. trip system = A system which consists of a Micrologic trip unit and current transformers. trip unit = A programmable device which measures and times current flowing through the circuit breaker and initiates a trip signal when appropriate. UL® = See Underwriters Laboratories Inc. 242 06/2014 ™ © 2011–2014 Schneider Electric All Rights Reserved PowerPact™ H-, J-, and L-Frame Circuit Breakers Glossary undervoltage trip (MN, UVR) = An accessory which trips the circuit breaker automatically when the monitored circuit voltage falls below a predetermined percentage of its specified value. Underwriters Laboratories Inc.® (UL®) = An independent, not-for-profit standards development, product safety testing and certification organization. unit-mount circuit breaker = A circuit breaker mounted such that it cannot be removed without removing primary and sometimes secondary connections or mounting supports. withstand rating = The level of RMS symmetrical current that a circuit breaker can carry with the contacts in a closed position for a stated period of time–usually stated in cycles. zero-blind time = Metering method used by the Micrologic H trip unit where a dedicated metering data chain is separate from the protection data chain so that a greater number of data samples can be used for metering. This increases the number of samples taken per time period, which in turn gives the H trip unit a higher degree of metering accuracy. zero-sequence ground-fault sensing = A means of providing equipment ground-fault protection utilizing an external sensor (surrounding all phase and neutral conductors). zone-selective interlocking (ZSI) = A communication capability between electronic trip systems and ground-fault relays which permits a short circuit or ground fault to be isolated and cleared by the nearest upstream device with no intentional time delay. ZSI = Zone-selective interlocking. 243 © 2011–2014 Schneider Electric All Rights Reserved ™ 06/2014 Schneider Electric USA, Inc. Schneider Electric Canada, Inc. 1415 S. Roselle Road Palatine, IL 60067 USA 1-888-778-2733 www.schneider-electric.us 5985 McLaughlin Road Mississauga, ON L5R 1B8 Canada Tel:1-800-565-6699 www.schneider-electric.ca © 2011–2014 Schneider Electric All Rights Reserved Schneider Electric, Square D, PowerPact and Micrologic are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners. 0611CT1001 R05/14 Replaces 0611CT1001 R01/14 06/2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : mcr126 Create Date : 2014:06:24 11:03:55-05:00 Modify Date : 2014:06:24 11:03:55-05:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : FrameMaker 10.0.2 Producer : Acrobat Distiller 10.1.10 (Windows) Format : application/pdf Title : 0611CT1001.book Creator : mcr126 Document ID : uuid:940bb980-da6a-4f01-adb5-aacf4a2dd70d Instance ID : uuid:2181c919-3ef2-41fb-8826-74c85dead892 Page Count : 244EXIF Metadata provided by EXIF.tools