100561 Catalog
100561-Catalog 100561-Catalog 100561-Catalog 782051 Batch7 unilog cesco-content
2014-09-05
: Pdf 100561-Catalog 100561-Catalog 781011 Batch7 unilog
Open the PDF directly: View PDF .
Page Count: 244
Download | |
Open PDF In Browser | View PDF |
Strut Systems Other Cooper B-Line Product Lines Cable Tray Systems Electrical Enclosures Electronic Enclosures Pipe Hanger & Support Systems Spring Steel Fasteners Cable Runway & Relay Racks (CommData) Meter Mounting & Distribution Equipment Anchors SS-08R www.cooperbline.com Questions, Comments, Suggestions? B-VOCAL with Cooper B-Line ” ““ SSMM Voice Of the Customer...Actively Listening bvocal@cooperindustries.com 618-654-2184 ext. 456 SYSTEMS THAT MAKE SENSE Cooper Industries, Ltd. 600 Travis, Ste. 5800 Houston, TX 77002-1001 Phone: 713-209-8400 www.cooperindustries.com © 2008 Cooper B-Line, Inc. Strut Systems SS-08R Cooper B-Line 509 West Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 Printed in U.S.A. 10708 Channels, Hardware, Fittings. Mechanical & Electrical Accessories, Special Materials (Aluminum, Stainless Steel, Fiberglass), Mini Channel, Concrete Inserts, Slotted Angle, Kwik-Wire™, Roof-Top Supports INTRODUCTION Cooper B-Line, Inc. is a leading manufacturer and fabricator of steel and aluminum products which are used in support of equipment for industrial, commercial, utility, and OEM installations. Cooper B-Line is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our metal framing product line. Our customers have access to the most complete support systems offered in the industry, including metal framing, cable tray, pipe hangers, slotted angle, and fasteners. Many of Cooper B-Line s products are listed by the Underwriter s Laboratories, Inc. All Cooper B-Line products are manufactured to meet or exceed MFMA and other industry standards set for their design and manufacture. The majority of Cooper B-Line products are produced in four modern plants consisting of approximately 900,000 square feet. These facilities are located in Highland, Illinois; Troy, Illinois; Reno, Nevada; and Sherman, Texas. Regional sales and distribution centers are located throughout the United States stocking standard Cooper B-Line products for quick service and delivery. This catalog is designed to be helpful to engineers and contractors in the application and selection of strut products for construction and maintenance. If a unique application requires a special product not included in this catalog. Cooper B-Line engineering personnel are ready to furnish design consultation and realistic cost estimates. In addition, sales representatives with engineering know-how are located throughout the United States and abroad for your convenience. Cooper B-Line, Inc. 509 West Monroe Street Highland, Illinois 62249-0326 Phone: 800-851-7415 www.cooperbline.com © 2008 Cooper B-Line New Products DURA-BLOK™ ROOFTOP SUPPORTS Pgs. 136-143 DB Series DB6 Series DB10 Series DBE10 Series DBM Series DB__DS Series DBR10-12 DBR Series DURA CLEAN™ WASHDOWN SUPPORTS Pg. 144-149 Dura Clean™ Channel Dura Clean™ Wall Mount Rails U-Bolts Threaded Rod Hardware I Spacers New Products ARMAFIX® CLAMPS & ACCESSORIES Pg. 120 Stop Condensation Leaks Armaflex® Insulation Tape Insert Only Used with B-Line Pipe Hangers (Sold Separately) Clamp & Insert Assembly Includes: Insert, Clamp, and Hardware KWIKWIRE™ & ACCESSORIES Pg. 57 KwikWire™ Wire Rope KwikWire™ Clamps KwikWire™ Cutter HOT RODS™ AHHK-1/4 & AHHK-3/8 Pg. 56 AIR HANDLER HANGING KIT Pg. 215 II KwikPak™ (Includes clamps & wire rope) Air Duct Corner Protector Product Showcase BTS22TH B22SHA SLOTTED BACK-TO-BACK CHANNEL Pg. 41 CHANNEL WITH 9/16” HOLES ON 11/2” CENTERS & CUTTING MARKS ON 11/2” CENTERS Pg. 42 B__S58, B__M, B__H25 DCN3/8 B650 TELESCOPING CHANNEL Pg. 38 & 39 CHANNELS Pg. 42 & 43 CONVEYOR NUT Pg. 52 BK__H112 SEISMIC RETROFIT BRACKET Pg. 70 BxxS58 BxxM BxxH25 UTILITY POLE BRACKET Pgs. 90 & 91 B852S-W-D B810 B802D B812 B809B B816 III Product Showcase PLASTIC END CAPs Pgs. 96 & 97 P CLAMPS O.D. SIZE .250”-2.750” Pg. 117 B823 Series B825 Series B852 B822A VIBRACLAMP® BVS-12 & BVS-120 B2417 & B2417-CT Stainless Steel & Aluminum Fiberglass Slotted Angle O.D. SIZE 1/4”-61/8” PIPE SIZE 1/4”-6” Pg. 118 & 119 Pgs. 164 - 169 VIBRA STRIP FOR 15/8” WIDE CHANNEL Pg. 121 Pgs. 170 - 187 STRUT MOUNTED PIPE GUIDE Pg. 123 Pgs. 210 - 215 IV Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Technical Data Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Design of Strut Systems . . . . . . . . . . . . 10-12 Recommended Specification . . . . . . . . . . . 13 Channel & Combinations Info. & Specifications . . . . . . . . . . . . . . . . . 14 Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . 15 B11 Channel . . . . . . . . . . . . . . . . . . . . . . . 16-17 B12 Channel . . . . . . . . . . . . . . . . . . . . . . . 18-19 B22 Channel . . . . . . . . . . . . . . . . . . . . . . . 20-23 B24 Channel . . . . . . . . . . . . . . . . . . . . . . . 24-25 B26 Channel . . . . . . . . . . . . . . . . . . . . . . . 26-27 B32 Channel . . . . . . . . . . . . . . . . . . . . . . . 28-29 B42 Channel . . . . . . . . . . . . . . . . . . . . . . . 30-31 B52 Channel . . . . . . . . . . . . . . . . . . . . . . . 32-33 B54 Channel . . . . . . . . . . . . . . . . . . . . . . . 34-35 B56 Channel . . . . . . . . . . . . . . . . . . . . . . . 36-37 Telescoping Channel . . . . . . . . . . . . . . . 38-39 Channel Hole Patterns . . . . . . . . . . . . . 40-43 Channel Hole Punch . . . . . . . . . . . . . . . . . . . 43 Channel Nuts & Hardware Info. & Specifications . . . . . . . . . . . . . . . . . 44 Channel Nuts Selection Charts . . . . . . . . . . . . . . . . . 45-49 Slip & Pull-out Load Charts . . . . . . 50-51 Other Hardware . . . . . . . . . . . . . . . . . . . . 52-56 KwikWire™ & Accessories . . . . . . . . . . . 57 Strut Fittings Info. & Specifications . . . . . . . . . . . . . . . . . 58 Flat Plate Fittings . . . . . . . . . . . . . . . . . . 59-61 90° Angle Fittings . . . . . . . . . . . . . . . . . . 62-67 Angular Fittings . . . . . . . . . . . . . . . . . . . . 68-70 Braces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Clevis Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 72 U-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 73-76 Z-Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 77-79 Wing Fittings . . . . . . . . . . . . . . . . . . . . . . 80-82 Post Bases . . . . . . . . . . . . . . . . . . . . . . . . . 83-84 Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-91 Miscellaneous Fittings . . . . . . . . . . . . . 92-97 Beam Clamps & Accessories Info. & Specifications . . . . . . . . . . . . . . . . . 98 Beam Clamps & Accessories . . . . . . 99-109 Pipe/Conduit Clamps & Hangers Info. & Specifications . . . . . . . . . . . . . . . . 110 Pipe Clamps . . . . . . . . . . . . . . . . . . . . . 111-117 Vibra Clamps . . . . . . . . . . . . . . . . . . . . 118-119 Armafix® Clamps & Accessories . . . . . 120 Vibra Cushions . . . . . . . . . . . . . . . . . . . . . . . 121 Pipe Clamps . . . . . . . . . . . . . . . . . . . . . 122-126 Pipe Hangers . . . . . . . . . . . . . . . . . . . . 127-128 Pipe Brackets . . . . . . . . . . . . . . . . . . . . . . . . 129 Pipe Rollers . . . . . . . . . . . . . . . . . . . . . 130-135 Dura-Blok™ Rooftop Supports Info. & Specifications . . . . . . . . . . . . . . . . 136 Base Support . . . . . . . . . . . . . . . . . . . . . . . . . 137 Base Support - Channel . . . . . . . . . . 137-138 Base Support - Pipe/Tubing Riser . . . . 138 Base Support Riser - Channel . . . . . . . . 139 Base Support Riser - Pipe Roller . . . . . 139 Base Support - ‘H’ Stand . . . . . . . . 140-141 Base Support - Pipe Roller . . . . . . . . . . . 142 Application Photos . . . . . . . . . . . . . . . . . . . 143 Dura-Clean™ Washdown Supports Info. & Specifications . . . . . . . . . . . . . . . . 144 Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Wall Mount Rails . . . . . . . . . . . . . . . . . . . . 146 U-Bolts & Hardware . . . . . . . . . . . . . . . . . 147 Threaded Rod & Spacers . . . . . . . . . . . . . 148 Application Photos . . . . . . . . . . . . . . . . . . . 149 Electrical Accessories Info. & Specifications . . . . . . . . . . . . . . . . 150 Selection Chart . . . . . . . . . . . . . . . . . . . . . . . 151 Fluorescent Fixture Hangers . . . . . 152-154 Electrical Accessories . . . . . . . . . . . 155-156 Junction Boxes . . . . . . . . . . . . . . . . . . . . . . . 157 Strut Joiners . . . . . . . . . . . . . . . . . . . . . 158-159 Electrical Hardware . . . . . . . . . . . . . . . . . . 160 Porcelain Clamps . . . . . . . . . . . . . . . . 161-162 Maple Clamps . . . . . . . . . . . . . . . . . . . 162-163 Aluminum & Stainless Steel Materials Info. & Specifications . . . . . . . . . . . . . . . . 164 Aluminum . . . . . . . . . . . . . . . . . . . . . . . 165-167 Stainless Steel . . . . . . . . . . . . . . . . . . . 168-169 Fiberglass Materials Info. & Specifications . . . . . . . . . . . 170-171 Channels . . . . . . . . . . . . . . . . . . . . . . . . 172-176 Hardware . . . . . . . . . . . . . . . . . . . . . . . . 176-178 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 179-187 Mini Channel & Fittings Info. & Specifications . . . . . . . . . . . . . . . . 188 Mini Channels . . . . . . . . . . . . . . . . . . . 189-190 Mini Channel Nuts . . . . . . . . . . . . . . . . . . . 191 Mini Fittings . . . . . . . . . . . . . . . . . . . . 191-199 Econo-Strut & Fittings . . . . . . . . . . . 200-201 Concrete Inserts Info. & Specifications . . . . . . . . . . . . . . . . 202 Continuous Inserts . . . . . . . . . . . . . . . 203-206 Spot Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Insert Accessories . . . . . . . . . . . . . . . . . . . . 208 Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Slotted Angle Info. & Specifications . . . . . . . . . . . . . . . . 210 Slotted Angle Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Loading Charts . . . . . . . . . . . . . . . . 212-214 Slotted Angle Fittings . . . . . . . . . . . . . . . . 215 Reference Data Index 1 . . . . . . . . . . . . . . . . . . . . . 216-225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226-233 Introduction Introduction B-Line’s metal framing support system is designed with many time-saving features. They are fully adjustable and reusable, with a complete line of channels, fittings and accessories for multi-purpose applications. • No Welding • No Drilling • Use Your Imagination B-Line metal framing installs quickly. There is no need for special tools. All you need is a wrench and hacksaw. Channels and parts can be taken apart for reuse as quickly as they were assembled, yet they provide the strength of welded construction. Eliminating welding and drilling produces substantial savings in time and labor. 1. Tite-Grip channel nut may be inserted anywhere along continuous slot. Designed for easy insertion and self-alignment. 2. A 90 degree turn aligns channel nut grooves with inturned lips of the channel. 3. Position fitting over channel nut and insert bolt to start any connection. 4. With the twist of a wrench, channel nut locks its teeth firmly against inturned lips. 2 Introduction Introduction B-Line’s Metal Framing system provides an economical solution for electrical, mechanical and industrial supports with an unlimited variety of applications in the construction industry. Metal Framing Electrical Applications • Lighting Fixture Supports • Raceway Systems • Trapeze Hangers • Pipe & Conduit Supports • Cable Tray Supports • Beam Adjustments Metal Framing Mechanical Applications • Piping Racks • Tunnel Pipe Stanchions • Concrete Inserts • Beam Attachments • Pipe Risers Metal Framing Industrial Applications • Racks and Shelving • Partitions • Production Line Supports • Trolley Systems • Wall Framing 3 Technical Data MATERIALS Carbon Steel Aluminum Channels made from high-quality carbon steel are continuously roll formed to precise dimensions. By cold working the steel mechanical properties are increased, allowing lightweight structures to carry the required load. Corrosion resistance of carbon steel varies widely with coating and alloy. See “Finishes” for more detailed information. B-Line’s standard aluminum channel is extruded from aluminum alloy 6063-T6. Strut fittings are made from aluminum alloy 5052-H32. The high strength to weight ratio of channel made of aluminum greatly reduces the overall cost of installation through ease of handling and field cutting. Unlike other base materials depicted in this catalog, fiberglass exhibits unique physical property changes when operating in elevated temperature conditions, that are a fraction of increase compared to steel or Aluminum owes its excellent corrosion resistance to its ability to form an aluminum aluminum. This being true, B-Line advises against using fiberglass in temperatures oxide film that immediately reforms when greater than 200° F. scratched or cut. In most outdoor applications, aluminum has excellent Please refer to the "Corrosion Resistance resistance to “weathering”. The resistance to chemicals, indoor or outdoor, can best be Guide" below for specific applications. determined by tests conducted by the user with exposure to the specific conditions for B-Line Fiberglass Strut systems are which it is intended. The corrosion manufactured from glass fiber-reinforced resistance of aluminum to some commonly plastic shapes that meet ASTM E-84, Class 1 known chemicals is shown in the Corrosion Flame Rating and self-extinguishing Chart. For further information, contact requirements of ASTM D-635. A surface veil B-Line Systems, Inc. or the Aluminum is applied during pultrusion to insure a Association. resin-rich surface and ultraviolet resistance. Stainless Steel Technical Data condition with concentrated levels of Chlorine, [ Cl- ]. Please consult our fiberglass corrosion resistance charts on pg. 173 for specific chemical recommendation data. Stainless steel channel is available in AISI Type 304 or 316 material. Both are non-magnetic and belong to the austenitic stainless steels group, based on alloy content and crystallographic structure. Like carbon steel, stainless steel exhibits increased strength when cold worked by roll-forming. Several conditions make the use of stainless steel ideal. These include reducing long term maintenance costs, high ambient temperatures, appearance, and stable structural properties such as yield strength, and high creep strength. Fiberglass While polyester is sufficient for most uses, B-Line offers two fire retardant (FR) resins vinyl ester is suitable for a broader range of for strut systems, polyester and vinyl ester. environments. Both resins are ideal for corrosive environments or nonconductive applications with moderate strength requirements. Some common types of environments where Vinyl Ester Resins are recommended, that Poly Esters are not, are paper mills, most any metal plating operation and any Type 304 resists most organic chemicals, dyestuffs and a wide variety of inorganic chemicals at elevated or cryogenic temperatures. Type 316 contains slightly more nickel and adds molybdenum to give it better corrosion resistance in chloride and sulfuric acid environments. More specific \information concerning the differences between types 304 and 316 is available from B-Line. 6 1A 6 2 ine B2 0 74 B-Line Steel Strut is stamped with: 8 SS Traceable to the steel’s origin Material/Finish B-Line part number designation Company Name -L B 4 Technical Data FINISHES Chromium/ Zinc Zinc Coatings Zinc protects steel in two ways. First it protects the steel as a coating and second as a sacrificial anode to repair bare areas such as cut edges, scratches, and gouges. The corrosion protection of zinc is directly related to its thickness and the environment. This means a .2 mil coating will last twice as long as a .1 mil coating in the same environment. Chromium/ Zinc is a corrosion resistant composition, which was developed to protect fasteners and small bulk items for automotive use. The coating applications have since been extended to larger parts and other markets. Chromium/Zinc composition is an aqueous coating dispersion containing chromium, proprietary organics, and zinc flake. This finish provides 500 hours protection in salt spray testing per ASTM B117. Galvanizing also protects cut and drilled edges. ZnO Electrogalvanized Zinc Electrogalvanized Zinc (also known as zinc plated or electroplated) is the process by which a coating of zinc is deposited on the steel by electrolysis from a bath of zinc salts. A rating of SC3, B-Line’s standard, provides a minimum zinc coating thickness of .5 mils (excluding hardware, which is SC1 = .2 mils). When exposed to air and moisture, zinc forms a tough, adherent, protective film consisting of a mixture of zinc oxides, hydroxides, and carbonates. This film is in itself a barrier coating which slows subsequent corrosive attack on the zinc. This coating is usually recommended for indoor use in relatively dry areas, as it provides ninety-six hours protection in salt spray testing per ASTM B117. (Mill galvanized, hot dip mill galvanized or continuous hot dip galvanized) Pregalvanized steel is produced by coating coils of sheet steel with zinc by continuously rolling the material through molten zinc at the mills. This is also known as mill galvanized or hot dip mill galvanized. These coils are then slit to size and fabricated by roll forming, shearing, punching, or forming to produce B-Line pre-galvanized strut products. The G90 specification calls for a coating of .90 ounces of zinc per square foot of steel. This results in a coating of .45 ounces per square foot on each side of the sheet. This is important when comparing this finish to hot dip galvanized after fabrication. During fabrication, cut edges and welded areas are not normally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas after a short period of time. Hot dip galvanized strut products are fabricated from steel and then completely immersed in a bath of molten zinc. A metallic bond occurs resulting in a zinc coating that completely coats all surfaces, including edges and welds. Another advantage of this method is coating thickness. Strut products that are hot dip galvanized after fabrication have a minimum thickness of 1.50 ounces per square foot on each side, or a total 3.0 ounces per square foot of steel, according to ASTM A123. The zinc thickness is controlled by the amount of time each part is immersed in the molten zinc bath as well as the speed at which it is removed. The term "double dipping" refers to parts too large to fit into the galvanizing kettle and, therefore, must be dipped one end at a time. It does not refer to extra coating thickness. The layer of zinc which bonds to steel provides a dual protection against corrosion. It protects first as an overall barrier coating. If this coating happens to be scratched or gouged, zinc's secondary defense is called upon to protect the steel by galvanic action. Hot-Dip Galvanized After Fabrication is recommended for prolonged outdoor exposure and will usually protect steel for 20 years or more in most atmospheric environments and in many industrial environments. For best results, a zinc rich paint (available from B-Line) should be applied to field cuts. The zinc rich paint will provide immediate protection for these areas and eliminate the short time period for galvanic action to “heal” the damaged coating. Anticipated Life of Zinc Coatings In Various Atmospheric Environments 40 36 29 30 Life in Years Hot Dip Galvanized = Zinc Coating 1.50 Oz./Ft.2 (.0026” Thick) Pre-Galvanized = Zinc Coating 0.45 Oz./Ft.2 (.00075” Thick) 25 21 20 10 10 11 8 7 Rural 18 Tropical Marine 6 Temperature Marine Suburban Environment 5 5 Urban 3 Highly Industrial Technical Data Pre-Galvanized Zinc Zn ZnFe Fe Hot Dip Galvanized After Fabrication (Hot dip galvanized or batch hot dip galvanized) Technical Data Dura-Green® and Dura-Copper® Epoxy Coatings and Fittings, UL5” and “Standard for Pipe Hanger Equipment for Fire Protection Service, UL203”. Dura-Green and Dura-Copper epoxy coatings are water borne epoxy coatings applied to B-Line products by a precisely controlled cathodic electro-deposition process. This process is accomplished using a conveyor to transport channel and fittings through several cleaning, phosphatizing and application stages prior to being baked (See diagram below). Due to Dura-Green’s organically based composition, it seats itself into porous surfaces more completely and efficiently than zinc coatings. As these porous caverns are filled along the material profile, the outer finished surface demonstrates an increased smooth uniform plane which produces considerably less off-gasing when tested. Technical Data This custom-designed paint system is used for painting all channels, channel combinations, slotted angle, and fittings. B-Line’s Dura-Green channel meets or exceeds 100 level clean room standards. This was confirmed by testing the channel in accordance with Boeing (PCL) Standards, which are more stringent and complete than ASTM E595-93. Dura-Green was found to be a superior finish, due in part to its proven application process. Samples are selected on a routine basis for Salt Spray (fog) testing to verify the quality of the finish. These tests are performed in accordance with ASTM B117 and evaluated and related according to ASTM D1654 (Tables 1 & 2). PVC Coating The Dura-Green and Dura-Copper Epoxy coatings have been tested and listed by Underwriters Laboratories in accordance with “Standard for Surface Metal Raceway Another of the corrosion resistant coatings offered by B-Line is PVC (polyvinyl Unscribed 5% Failure (1) Scribed 1/8” (3.2) Creepage from Scribe (1) B-Line Dura-Green Epoxy 1000 Hours 312 Hours Mill Galv. (Pre-Galv.) G90 192 Hours 288 Hours Perma-Green 438 Hours 231 Hours Zinc Chromate 36 Hours 96 Hours 10 to 36 Hours 4 to 30 Hours Type of Finish Industry Green (Range) The standard coating thickness of B-Line’s PVC coated products is 15 mils (.380 mm), plus or minus 5 mils (.125 mm). Since the chemistry, not the thickness of vinyl plastic PVC determines longevity, a coating of 10 to 20 mils (.250 to .500 mm) is more than adequate. If the corrosive conditions are such that the plasticizers are leeched out, a thicker coating will do little to extend the life of a coated product. For certain environments, a plastisol dipped PVC coating is available on request. SALT SPRAY TEST RESULTS ˛ chloride), applied over steel or aluminum channel and fittings. The PVC coating process begins by cleaning the product thoroughly. A bonding coat is applied to the part and then preheated to a temperature above the melting point of the coating powder. The product is then passed through a fluidized bed of vinyl plastic powder where the powder particles melt, adhere and flow out to form a smooth continuous coating. The thickness is controlled by the base metal temperature and the immersion time in the bed. It is then post-heated to complete the fusion of the outer surfaces. (1) All salt spray (fog) tests conducted in accordance with ASTM B117 and evaluated and rated according to ASTM D1654 Tables 1 & 2. Tests are performed and certified by an independent testing laboratory. PVC coating depends totally on the concept of encapsulation attached to the base metal by a bonding agent. If any hole or discontinuity occurs, the corrosive action can undercut the base metal to a point where all that remains is the PVC. In the event of field cuts or any other damage to the coating, a liquid PVC patch, available from B-Line, must be applied to maintain the integrity of the coating. After the installation is complete, a thorough inspection should be performed to assure the absence of voids, pinholes, or cuts. DURA-GREEN®/DURA-COPPER® EPOXY COATING PROCESS TANK 1 The channel and parts are thoroughly cleaned and phosphatized. TANK 2 A rinse is applied to remove insoluble salts and unreacted phosphates. TANK 3 A phosphatized sealer is applied to insure corrosion resistance and paint adhesion. TANK 4 The material moves through clear water rinse to remove excess phosphates. TANK 5 A pre-deionized rinse prepares the metal for the cathodic electrocoating. 6 TANK 6 The electrocoating tank applies a uniform coat of epoxy paint to the entire surface. TANK 7 The first post rinse removes any unelectrically attracted solids. TANK 8 The final rinse insures a smooth, nonblemish surface. BAKE OVEN The curing process takes 20 minutes at a baking temperature of 375° F (199° C). Technical Data WELDING The welding procedures used in the fabrication of B-Line steel products are in accordance with American Welding Society Standards. To achieve the highest quality in our manufacturing processes, our welders follow standards set by AWS Code. Spot Welding Spot Weld MIG Welding MIG welded, more properly called gas metal arc welded (GMAW) combination channels and fittings, are produced when physical dimensions or certain combinations require a weld process other Mig Weld 7 than automatic spot welding. The same quality control requirements are imposed on MIG welded and spot-welded products. Quality Assurance B-Line System’s Quality Assurance Program has been developed and implemented for compliance to 10CFR50 appendix B and NQA-1. B-Line also complies with various industry standards and specifications. B-Line has extensive experience in supplying metal framing components for the nuclear power generating industry and complies with 10 CFR21. Technical Data Spot welded back-to-back channel is manufactured using a modern DC powered resistance welder controlled by a microprocessor. This produces a series of spot welds with speed and consistency. Consistency is one of the most important advantages in specifying B-Line back-toback channel. Variables such as weld sequence, speed and duration are carefully controlled and monitored by a sophisticated electronic control system. A statistical quality control program, combining destructive and non-destructive testing, is used by B-Line to ensure high quality welds. Technical Data CORROSION GALVANIC SERIES IN SEA WATER All metal surfaces are affected by corrosion Depending on the physical properties of the metal and the environment to which it is exposed, chemical or electromechanical corrosion may occur. Anodic End Atmospheric Corrosion Chemical Corrosion Chemical corrosion takes place when metal comes in direct contact with a corrosive solution. Some factors which affect the severity of chemical corrosion include: chemical concentration level, duration of contact, frequency of washing, and operating temperature. Storage Corrosion Wet storage stain (white rust) is caused by the entrapment of moisture between surfaces of closely packed and poorly ventilated material for an extended period. Wet storage stain is usually superficial, having no affect on the properties of the metal. Light staining normally disappears with weathering. Medium to heavy buildup should be removed in order to allow the formation of normal protective film. Proper handling and storage will help to assure stain-free material. If product arrives wet, it should be unpacked and dried before storage. Dry material should be stored in a well ventilated “low moisture” environment to avoid condensation formation. Outdoor storage is undesirable, and should be avoided whenever possible. Galvanic Corrosion Galvanic corrosion occurs when two or more dissimilar metals are in contact in the presence of an electrolyte (ie. moisture). An electrolytic cell is created and the metals form an anode or a cathode depending on their relative position on the Galvanic Series Table. The anodic material will be the one to corrode. Anodic or cathodic characteristics of two dissimilar metals will depend on the type of each material. For example: If zinc and steel are in contact, the zinc acts as the anode and will corrode; the steel acts as the cathode, and will be protected. If steel and copper are in contact, the steel is now the anode and will corrode. The rate at which galvanic corrosion occurs depends on several factors: More Anodic Technical Data Atmospheric corrosion occurs when metal is exposed to airborne liquids, solids or gases. Some sources of atmospheric corrosion are moisture, salt, dirt and sulphuric acid. This form of corrosion is typically more severe outdoors, especially near marine environments. Magnesium Magnesium Alloys Zinc Beryllium Aluminum - Zinc Alloys (7000 series) Aluminum - Magnesium Alloys (5000 series) Aluminum (1000 series) Aluminum - Magnesium Alloys (3000 series) Aluminum - Magnesium - Silicon Alloys (6000 series) Cadmium Aluminum - Copper Alloys (2000 series) Cast Iron, Wrought Iron, Mild Steel Austenitic Nickel Cast Iron Type 410 Stainless Steel (active) Type 316 Stainless Steel (active) Type 304 Stainless Steel (active) Naval Brass, Yellow Brass, Red Brass Tin Copper Lead-Tin Solders Admiralty Brass, Aluminum Brass Manganese Bronze Silicon Bronze Tin Bronze Type 410 Stainless Steel (passive) Nickel - Silver Copper Nickel Alloys Lead Nickel - Aluminum Bronze Silver Solder Nickel 200 Silver Type 316 Stainless Steel (passive) Type 304 Stainless Steel (passive) Incoloy 825 Hastelloy B Titanium Hastelloy C Platinum Graphite Cathodic End Metals in descending order of activity in the presence of an electrolyte. 1. The relative position on the Galvanic Series Table - the further apart materials are in the Galvanic Series Table, the greater the potential for corrosion of the anodic material. 2. The amount and concentration of electrolyte present - an indoor, dry environment will have little or no galvanic corrosion compared to a wet atmosphere. 3. The relative size of the materials - a small amount of anodic material in contact 8 with a large cathodic material will result in greater corrosion. Likewise, a large anode in contact with a small cathode will decrease the rate of attack. Technical Data Aluminum R R R R F R R NR R R F R – R R R F R R R F NR NR NR R R R R F R R R R R R R R F R – R F NR NR NR F NR NR NR F F F R F R F R R Dura-Green NR F R R R R R R R R R R R R R R R R R R R NR F F NR R R R R R F R R R R R R NR R R R NR R R R R R R R R R NR R R R F R R PVC R R NR R R R NR R R NR F R – NR R NR NR R R R R R – – R – R R R – R R NR NR – R R R – – NR R R R R R R R R R R R R R R R R NR Type 304 Stainless R R R R R R R NR R R R NR – – R – – R R R R NR NR NR R R F R NR R R R – – – R R R – R R R R R R R R R – – NR NR – R R R F – Type 316 Stainless R R R R R R R NR R R R F – – R – – R R R R NR NR NR R R R R – R R R – – – R R R – R R R R R R R R R – – R R – R R R F – Fiberglass corrosion chart on page 171. The corrosion data given in this table is for general comparison only. The presence of contaminates and the effect of temperature in chemical environments can greatly affect the corrosion of any material. B-Line strongly suggests that field service tests or simulated laboratory tests using actual environmental conditions be conducted in order to determine the proper materials and finishes to be selected. R=Recommended F=May be used under some conditions NR=Not Recommended –Information not available 9 Zinc Coated Steel NR NR R – – – – – R – – R – NR R R R R R R – NR NR NR – – – – – NR – R R R – R R – NR R R NR – – – F NR F – – – NR – – F F R – Technical Data Chemical Acetic Acid 10% Acetic Acid 2% Acetone Ammonium Hydroxide-Conc. Ammonium Hydroxide 10% Ammonium Hydroxide 2% Benzene Bromine Water Butanol (Butyl Alcohol) Carbon Disulfide Carbon Tetrachloride Chlorine Water Cutting Oil Diethanolamine Ethanol Ethyl Acetate Ethylene Dichloride Formaldehyde 20% Gasoline Glycerine Household Detergent 10% Hydrochloric Acid 40% Hydrochloric Acid 10% Hydrochloric Acid 2% Hydrogen Peroxide 30% Hydrogen Peroxide 3% Hydrogen Sulfide (Gas) JP-4 Jet Fuel Lactic Acid 85% Latex Linseed Oil Fatty Acid Methanol Methyl Ethyl Ketone Methyl Isobutyl Ketone Mineral Spirits Motor Oil-10W Naphtha, VM&P Nitric Acid 2% Perchloroethylene Petroleum Ether Phenol 10% Phosphoric Acid 2% Potassium Hydroxide 50% Potassium Hydroxide 10% Potassium Hydroxide 2% Sodium Chloride 25% Sodium Hydroxide 50% Sodium Hydroxide 10% Sodium Hydroxide 2% Sodium Hypochlorite-C1. 10% Sodium Hypochlorite-C1. 6% Sulfuric Acid 2% Tall Oil Fatty Acid (Syfate 94) Tannic Acid 50% Water-Deionized Water-Sea Water-Tap Xyol Technical Data DESIGN OF STRUT SYSTEMS Beams Beams are usually defined as horizontal members which are subjected to vertical loads such as shelves, platforms or supports for pipes, conduits or cable trays. The following is a brief overview of common beam configurations: Cantilever Beam Deflection Cantilever beams are often viewed as variations of a fixed beam, but they have special characteristics of their own. One end of the channel is firmly attached to a rigid support while the other end remains completely free. Deflection, commonly referred to as “sag”, is inherent in applying a load to a beam and cannot be avoided. Any and all beams will deflect when loaded. The amount of deflection will vary depending upon the material and the stiffness or moment of inertia. The deflection equations in this section show that increasing the stiffness can be increased by a variety of methods. Increasing the depth of the channel is the most direct method. A shelf bracket is an example of a cantilever beam. Technical Data Simple Beam An example of a simple beam is a length of channel placed across two cylinders. When a load is applied, the channel will support the load because of its stiffness. The cylinders serve to support the channel, but do not interfere with its natural tendency to flex or bend. Simple beam analysis is used almost universally for beam comparisons, even though it is seldom practical in field installations. A cable tray or conduit trapeze hanger closely resembles a simple beam. Point Load Point Load Continuous Beam This beam configuration is commonly used in lighting installations. The continuous beam possesses traits of both the simple and fixed beams. When equal loads are applied to all spans simultaneously, the counter-balancing effect of the loads on both sides of a support restricts the movement of the channel at the support, similar to that of the fixed beam. The end spans behave substantially like simple beams. Fixed Beam This type of fixed support restricts the movement of the ends of the channel when a load is applied. Because of this, the stiffness of the channel at the ends and center is employed to resist the load. The result is a load capability which is greater than that of an identical simple beam. The fixed beam can be approximated by bolting or welding a length of channel to rigid supports. Continuous beam installations can typically support 20% more load than a simple beam of the same span with approximately half the deflection. Therefore, simple beam data should be used for a general comparison only. An example of this configuration is found in a long run of channel when installed across several supports to form a number of spans. 10 The material used affects deflection in a manner which is significantly different from the way in which it affects load capacity. The deflection under load is inversely proportional to a material property known as the “modulus of elasticity” designated by “E”. The modulus of elasticity is dependent upon the basic composition of the material and is not necessarily related to the material’s strength. Technical Data Safety Factor The design loads given for strut beam loads are based on a simple beam condition using allowable stress of 25,000 psi. This allowable stress results in a safety factor of 1.68. This is based upon a virgin steel minimum yield strength of 33,000 psi cold worked during rolling to an average yield stress of 42,000 psi. For even more stringent deflection requirements, an allowable load is listed in the beam load charts which results in 1/360 span deflection. This amount of deflection is sometimes used for beams in finished ceilings that are to be plastered. Twisting & Lateral Bracing Loading of strut on long spans can cause torsional stress, resulting in the tendency of the strut to twist or bend laterally. This phenomenon reduces the allowable beam loads as shown in the beam loading charts. It is recommended that long spans be supported in a manner to prevent twisting (fixed ends), and that the channel have adequate lateral bracing. Many typical strut applications provide this support and bracing inherently. Piping, tubing, cable Columns Columns are vertical members which carry loads in compression. One common example of a channel column is the vertical members of a storage rack. In theory, a column will carry a load equal to its cross sectional area multiplied by the ultimate compressive stress of the material of which the column is made. In reality, there are many factors affecting the load capacity of a column, such as the tendency to buckle or twist laterally (torsionalflexural buckling), the type of connection at the top or bottom, the eccentricity of the load application, and material imperfections. Several of these failure modes have been considered in the allowable column load tables shown in the “Channel” section of this catalog. B-Line strongly recommends that the engineer perform a detailed study of the many variable conditions before the selection process begins. Design Factors to be Considered The loading capacity of channel depends primarily on the material, its cross-sectional design, and the beam or column loading configuration. It should be noted that if two lengths of channel have identical designs and configurations, the one made of the stronger base material will support a larger load. Therefore, any comparison of channel should begin by determining whether the materials are approximately equal in strength. The column loading chart for each channel lists the allowable load for each channel in compression. This load varies depending on the support condition or “K-factor”. Several “K-factors” are listed, which correspond to the following support conditions: K = .8 pinned top - fixed bottom K = .65 fixed top - fixed bottom K = 1.0 pinned top - pinned bottom K = 1.2 free top - fixed bottom There are a number of physical properties which are important to the complete design of a channel member; the “section modulus” designated as “Sx” or “Sy”, “moment of inertia” designated by “Ix” or “Iy”, and the “radius of gyration” which is given as “rx” or “ry”. 11 Every structural material has its own maximum or ultimate stress, which is usually expressed in “pounds per square inch” (pascals). Any load which causes a member to fail is referred to as its “ultimate” load. In order to prevent channel from being accidentally loaded up to or beyond its ultimate load, a safety factor is included into the design. The ultimate load is divided by the safety factor to obtain the “recommended” or “allowable” working load. When evaluating channel under various beam conditions, it is often more convenient to compare in terms of the ultimate or recommended “bending moment”. Simple equations show the stress is directly proportional to the bending moment. Therefore, comparing bending moments can save time in repeated calculations. The chart containing Formulas on Common Beam Loadings (following page) shows how to calculate the bending moment for various configurations and load conditions. It should be noted that the bending moment is usually not constant, but varies along the length of the span. However, the channel must be designed for a single point, which is the point of maximum bending moment. For information regarding dynamic or seismic design, contact B-Line’s Home Office. GENERAL INFORMATION Torque The torque values given throughout the catalog are to be used as a guide only. The relationship between the applied torque or torque wrench reading and the actual tension created in the bolt may be substantially different. For example, a dry non-lubricated bolt with a heavy plating may rate 50% as efficient as a bolt which is lubricated with a mixture of heavy oil and graphite. Other important factors affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%. Charts and Tables Charts and tables in this section are compiled from information published by nationally recognized organizations and are intended for use as a guide only. B-Line recommends that users of this information determine the validity of such information as applied to their own application. Technical Data Aluminum typically has an elastic modulus which is 1/3 that of steel even though they may have identical strength. As a result, the deflection of aluminum channel will be three times that of steel channel under equal loading. In areas where structures will be subject to general viewing, deflection can produce a displeasing effect. To the untrained eye, a sagging channel may appear to be a result of poor design or excessive loading. This is not usually the case. Many properly designed channel installations will show a noticeable deflection at their designed loads. In areas where cosmetics are not important, deflection should not be a factor. Designing an entire installation based on minimal deflection could result in an over designed structure. This translates into increased material and installation cost. Where cosmetics are important, it may be necessary to limit the deflection to an aesthetically pleasing amount. This “acceptable deflection” amount is typically given as a fraction of the span. 1/240 span deflection is typically the limit where the amount of deflection appears negligible. For example, a beam span of 240” would be allowed 1” (240/240) of deflection at the mid point. A 120” span would only be allowed 1/2” (120/240) of deflection. The maximum load for the channel must be limited in order to remain under these deflection requirements. The allowable load resulting in 1/240 span deflection is posted in the beam load chart for each channel size. trays, or conduits mounted to the strut with straps and clamps prevent twisting or lateral movement. If no such lateral support exists, contact the factory for loading recommendations. Technical Data The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported, single span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below. Load Factor LOAD AND SUPPORT CONDITION Simple Beam - Uniform Load Deflection Factor 1.00 1.00 .50 .80 Simple Beam - Two Equal Concentrated Loads at 1/4 Points 1.00 1.10 Beam Fixed at Both Ends - Uniform Load 1.50 .30 Beam Fixed at Both Ends - Concentrated Load at Center 1.00 .40 Cantilever Beam - Uniform Load .25 2.40 Cantilever Beam - Concentrated Load at End .12 3.20 1.30 .92 1.00 .42 Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span .62 .71 Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans .67 .48 Span Technical Data Simple Beam - Concentrated Load at Center Continuous Beam - Two Equal Spans - Uniform Load on One Span Span Span Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans EXAMPLES: PROBLEM: Calculate the maximum allowable load and corresponding deflection of a simply supported B22 beam with a concentrated load at midspan as shown. PROBLEM: Calculate the maximum allowable load and corresponding deflection of a cantilever B52 beam with a uniformly distributed load. 96” SOLUTION: From beam load chart for B22 (page 22), maximum allowable Load is A and the corresponding deflection is B. Multiplying by the appropriate factors shown in the chart above. SOLUTION: From beam load chart for B52 (page 33), maximum allowable load is A and the corresponding deflection is B. Multiplying by the appropriate factors shown in chart above. LOAD = A x load factor = _______ DEFLECTION = B x deflection factor = LOAD = A x load factor = _______ DEFLECTION = B x deflection factor = _______ 12 Technical Data RECOMMENDED BOLTED METAL FRAMING SPECIFICATION Brackets [ ] indicate alternative specifications which may be substituted by the project engineer. PART 1 - GENERAL 1.01 WORK INCLUDED A. Continuous slot, bolted framing channels and all associated fittings and hardware. B. Trapeze type supports for cable tray, conduit, pipe and other similar systems. C. Use of bolted metal framing as a surface metal raceway. B. ASTM A123 - Specification for Zinc (hot-dip galvanized) Coatings on Products Fabricated from Rolled, Pressed, and Forged Steel Shapes, Plates, Bars and Strips. C. ASTM A1011, 33,000 PSI min. yield Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality. D. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel. E. ASTM A653 33,000 PSI min. yield G90 - Specification for Steel Sheet, Zinc Coated (Galvanized) by the Hot-Dip Process. F. ASTM A1018 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled, Structural Quality. G. MFMA - Metal Framing Standards Publication, MFMA-1. 1.03 QUALITY ASSURANCE A. Manufacturers : Firms regularly engaged in the manufacture of bolted metal framing of the types required, whose products have been in satisfactory use in similar service for not less than 5 years. B. A material heat code number shall be stamped on all strut and fittings. This is required to maintain traceability of the product to the material test reports to the ASTM standard. C. For stainless steel items, the part number shall contain a material designator (EXAMPLE: B-Line B22SS6 for type 316 or B22SS4 for type 304), or a separate stamp shall be included to reference the type of material used. D. MFMA Compliance: comply with the latest revision of MFMA Standard Publication Number MFMA-3, “Metal Framing”. F. UL Compliance: Comply with UL “Standard for Surface Metal Raceway and Fittings”. 1.04 SUBMITTALS A. Submit drawings of strut and accessories including clamps, brackets, hanger rods and fittings. B. Submit manufacturer’s product data on strut channels including, but not limited to, types, materials, finishes, gauge thickness and hole patterns. For each different strut cross section, submit cross sectional properties including Section Modulus (Sx) and Moment of Inertia (Ix). 1.05 DELIVERY, STORAGE AND HANDLING A. Deliver strut systems and components carefully to avoid breakage, denting, and scoring finishes. Do not install damaged equipment. B. Store strut systems and components in original cartons and in clean dry space; protect from weather and construction traffic. PART 2 - PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS A. Manufacturer: Subject to compliance with these specifications, strut systems to be installed shall be as manufactured by B-Line Systems, Inc. [or engineer approved equal.] 2.02 STRUT CHANNELS AND COMPONENTS A. General: Strut shall be 15/8” wide in varying heights and welded combinations as required to meet load capacities and designs indicated on the drawings. B. Material and Finish: Material and finish specifications for each strut type are as follows: 1. Aluminum: Strut shall be manufactured of extruded aluminum alloy 6063-T6. All fittings and hardware shall be zinc plated according to ASTM B633. For outdoor use, all fittings and hardware shall be stainless steel Type 316 [Type 304] or chromium zinc, ASTM F1136 Gr. 3. 2. Epoxy Painted: Strut shall be made from steel meeting the minimum mechanical properties of ASTM A1011 33,000 PSI min yield, then painted with water born epoxy 13 applied by a cathodic electro-deposition process. Fittings shall be manufactured from steel meeting the minimum requirements of ASTM A1018 33,000 PSI min. yield. The fittings shall have the same epoxy finish as the strut. Threaded hardware shall be zinc plated in accordance with ASTM B633 Service Class 1 (SC1). Service Class 1 is not an acceptable coating for fittings or components other than threaded hardware. 3. Pre-Galvanized Steel: Strut shall be made from steel meeting the minimum mechanical properties of ASTM A653 33,000 PSI min. yield, mill galvanized coating designation G90. Fittings shall be manufactured from steel meeting the minimum requirements of ASTM A1018 33,000 PSI min. yield and zinc plated in accordance with ASTM B633 service class 3 (SC3). Threaded hardware shall be zinc plated in accordance with ASTM B633 Service Class 1 (SC1). Service Class 1 is not an acceptable coating for fittings or components other than threaded hardware. 4. Hot-Dip Galvanized Steel: Strut shall be made from steel meeting the minimum mechanical properties of ASTM A1011 33,000 PSI min. yield and shall be hot-dip galvanized after fabrication in accordance with ASTM A123. Fittings shall be manufactured from steel meeting the minimum requirements of ASTM A1018 33,000 PSI min. yield, and hot-dip galvanized after fabrication in accordance with ASTM A123. All hardware shall be stainless steel Type 316 [Type 304] or chromium zinc ASTM F1136 Gr. 3. All hotdip galvanized after fabrication products must be returned to point of manufacture after coating for inspection and removal of all sharp burrs. 5. Stainless Steel: All strut, fittings and hardware shall be made of AISI Type 316 [Type 304] stainless steel as indicated. Channels must be identified as required in previous section 1.03 Quality Assurance. PART 3 - EXECUTION 3.01 INSTALLATION A. Install strut as indicated; in accordance with equipment manufacturer’s recommendations, and with recognized industry practices. B. All nuts and bolts shall be tightened to the following values. Bolt Size 1/4-20 5/16-18 3/8-16 1/2-13 Torque (ft-lbs) 6 11 19 50 Technical Data 1.02 REFERENCES A. ASTM A108 - Specification for Steel Bars, Carbon, Cold Finished, Structural Quality. E. NEC Compliance: Comply with the latest revision NFPA 70 - Article 352 “Surface Metal Raceways and Surface Nonmetallic Raceways”. Metal Framing Channels Channel B-Line’s metal framing channel is cold formed on our modern rolling mills from 12 Ga. (2.6mm), 14 Ga. (1.9mm), and 16 Ga. (1.5mm) low carbon steel strips. A continuous slot with inturned lips provides the ability to make attachments at any point. Lengths Standard lengths are 10’ (3.05m) and 20’ (6.09m) with length tolerance of ±1/8” (+3.2mm). Custom lengths are available upon request. Slots B-Line’s slotted series of channels offer full flexibility. A variety of pre-punched slot patterns eliminate the need for precise field measuring for hole locations. Slots offer wide adjustments in the alignment and bolt sizing. Holes A variety of pre-punched 9/16” (14.3 mm) diameter hole patterns are available in B-Line channels. These hole patterns provide an economical alternative to costly field drilling required for many applications. Channel & Combinations Knockouts When used with series B217-20 Closure Strips, B-Line’s knockout channels can be used to provide an economical U.L. listed surface raceway. Channels are furnished with 7/8” (22.2 mm) knockouts on 6” (152 mm) centers, allowing for perfect fixture alignment on spans up to 20’ (6.09 m). Materials & Finishes (Unless otherwise noted) Steel: Plain 12 Ga. (2.6), 14 Ga. (1.9) and 16 Ga. (1.5) Steel: Pre-galvanized 12 Ga. (2.6), 14 Ga. (1.9) and 16 Ga. (1.5) Finish Code PLN Finish Plain GRN GALV Dura-Green Pre-Galvanized HDG YZN SS4 SS6 AL Hot-Dipped Galvanized Yellow Zinc Chromate Stainless Steel Type 304 Stainless Steel Type 316 Aluminum Specification ASTM A1011, 33,000 PSI min. yield ASTM A653 33,000 PSI min. yield ASTM A123 ASTM B633 SC3 Type II ASTM A240 ASTM A240 Aluminum 6063-T6 Note: A minimum order may apply on special material and finishes. Design Load The design loads given for strut beam loads are based on a simple beam condition using an allowable stress of 25,000 psi. This allowable stress results in a safety factor of 1.68. This is based upon virgin steel minimum yield strength of 33,000 psi cold worked during rolling to an average yield stress of 42,000 psi. Welding Weld spacing is maintained between 21/2 inches (63.5 mm) and 4 inches (101.6 mm) on center. Through high quality control testing of welded channels and continuous monitoring of welding equipment, B-Line provides the most consistent combination channels available today. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 14 Channel SELECTION CHART for Channels, Materials and Hole Patterns Material & Thickness * Channel Dimensions Channel Type 31/4” 27/16” 15/8” 15/8” 15/8” 13/8” 1” 13/16” 13/16” 13/16” 13/16” 13/32” 3/4” (82.5) (61.9) (41.3) (41.3) (41.3) (34.9) (25.4) (20.6) (20.6) (20.6) (20.6) (10.3) (19.0) Width 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 13/16” 13/16” 5/8” (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (20.6) (20.6) (15.9) Steel Alum. Type 304 Type 316 1 2 3 4 12 Ga. 12 Ga. 12 Ga. 14 Ga. 16 Ga. 12 Ga. 12 Ga. 12 Ga. 14 Ga. 16 Ga. 18 Ga. 18 Ga. 16 Ga. – .105 .105 .080 – – – – .080 – – – – – – 12 Ga. 14 Ga. – 12 Ga. 12 Ga. 12 Ga. 14 Ga. – – – – – – 12 Ga. 14 Ga. – – – – 14 Ga. – – – – SH S H17/8 TH 9/16” x 11/8” 13/32” x 3” slots 9/16” diameter holes 9/16” diameter on 17/8” centers diameter knockouts 1 12 1234 1234 1 13 13 1 1234 1 – – – 1 1 1 12 123 123 1 13 13 1 1234 1 – – – – – 1 – – – – – – – – – – 1 12 12 12 1 1 1 1 12 1 – – – slots on 2” centers 1 3 1 1 1 1 1 1 1 – – – KO6 7/8” The selection has been prepared to provide a reference for available channel, materials and hole patterns. Material types available for various hole patterns are defined by numbers 1 thru 4. Some stainless steel channels with hole patterns are available on special order only. *Metric equivalent for thicknesses shown in chart. 12 Ga. = 2.6 mm 18 Ga. = 1.2 mm 14 Ga. = 1.9 mm .105 = 2.6 mm 16 Ga. = 1.5 mm .080 = 2.0 mm **1 - Steel 2 - Aluminum 3 - Type 304 Stainless Steel 4 - Type 316 Stainless Steel Properties may vary due to commercial tolerances of the material. Channel Part Numbering Example: B22 SH SS4 120 Channel Type B11 B12 B22 † B24 † B26 B32 B42 B52 † B54 † B56 B62 B72 E7016 Hole Patterns Material/Finish SH (pg. 40) GRN S (pg. 40) GALV H178 (pg. 40) HDG TH (pg. 41) YZN K06 (pg. 41) SS4 SHA (pg. 41) SS6 S58 (pg. 42) AL M (pg. 42) H25 (pg. 43) H112 † (pg. 42) * Leave blank for no hole pattern Length 120 240 † BK style channel available in four (4) channel sizes and one (1) hole pattern only. (Example BK22H112) Reference page 14 for general fitting and standard finish specifications. 15 Channel & Combinations B11 B12 B22 B24 B26 B32 B42 B52 B54 B56 B62 B72 E7016 Height Stainless Steel Channel Hole Pattern ** B11 Channel, Combinations & Load Data B11 15/8” •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Aluminum •Weight: 3.05 Lbs./Ft. (4.54 kg/m) (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y 31/4” X (7.1) X (82.5) 1.5190 (38.6) 13/16” Y (20.6) X - X Axis SECTION PROPERTIES Channel & Combinations Channel B11 B11A Y - Y Axis Areas of Moment of Section Radius of Weight Section Inertia (I) Modulus (S) Gyration (r) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 in. cm 3.059 (4.55) .900 (5.81) 1.1203 (46.63) .6472 (10.61) 1.116 (2.83) 6.119 (9.11) 1.800 (11.61) 6.3931 (266.10) 1.9671 (32.24) 1.885 (4.79) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .4357 (18.14) .5362 (8.79) .8714 (36.27) 1.0725 (17.58) Radius of Gyration (r) in. cm .696 (1.77) .696 (1.77) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. BEAM LOADING Beam Span In. mm 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) 144 (3657) 168 (4267) 192 (4877) 216 (5486) 240 (6096) Channel Style B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A Uniform Load and Deflection Lbs. N In. mm 5130 5130* 3488 5130* 2616 5130* 2093 5130* 1744 5130* 1495 4552 1308 3983 1163 3541 1046 3187 872 2656 747 2276 654 1992 581 1770 523 1593 .029 .005 .065 .017 .117 .040 .183 .079 .263 .136 .358 .191 .468 .250 .592 .317 .731 .391 1.053 .563 1.433 .766 1.871 1.001 2.368 1.267 2.924 1.564 (22819) (22819) (15515) (22819) (11636) (22819) (9310) (22819) (7757) (22819) (6650) (20248) (5818) (17717) (5173) (15751) (4653) (14176) (3879) (11814) (3323) (10124) (2909) (8861) (2584) (7873) (2326) (7086) (.73) (.13) (1.65) (.43) (2.97) (1.01) (4.65) (2.00) (6.68) (3.45) (9.09) (4.85) (11.89) (6.35) (15.03) (8.05) (18.57) (9.93) (26.74) (14.30) (36.40) (19.45) (47.52) (25.42) (60.15) (32.18) (74.27) (39.72) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N 5130 5130* 3488 5130* 2616 5130* 2093 5130* 1744 5130* 1460 4552 1118 3983 884 3541 716 3187 497 2656 365 2078 280 1591 221 1257 179 1018 (22819) (22819) (15515) (22819) (11636) (22819) (9310) (22819) (7757) (22819) (6494) (20248) (4973) (17717) (3932) (15751) (3185) (14176) (2211) (11814) (1623) (9243) (1245) (7077) (983) (5591) (796) (4528) 5130 5130* 3488 5130* 2616 5130* 1908 5130* 1325 5130* 974 4552 745 3983 589 3353 477 2716 331 1886 243 1386 186 1061 147 838 119 679 (22819) (22819) (15515) (22819) (11636) (22819) (8487) (22819) (5894) (22819) (4332) (20248) (3314) (17717) (2620) (14915) (2122) (12081) (1472) (8389) (1081) (6165) (827) (4719) (654) (3727) (529) (3020) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. Reference page 14 for general fitting and standard finish specifications. 16 B11 Beam & Column Loading Data Y 31/4” (82.5) Y 61/2” (165.1) X X X 15/8” (41.3) X Y Y 13/16” (20.6) 31/4” (82.5) 1.5190 (38.6) B11B Wt. 6.10 Lbs./Ft. (9.08 kg/m) Wt. 6.10 Lbs./Ft. (9.08 kg/m) COLUMN LOADING Unbraced Height In. mm Channel Style B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A B11 B11A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N K = 1.0 Lbs. N (36431) 4477 (19914) 8446 (37569) 7783 (78738) 8267 (36773) 17778 (79080) 17572 (32521) 4183 (18607) 7838 (34865) 6503 36 (914) (77470) 8189 (36426) 17590 (78244) 17127 (27641) 3783 (16827) 7053 (31373) 4988 48 (1219) (75691) 8079 (35937) 17327 (77074) 16503 (22188) 3279 (14586) 6140 (27312) 3595 60 (1524) (73409) 7727 (34371) 16988 (75566) 15701 (16974) 2444 (10871) 5146 (22890) 2790 72 (1829) (70620) 6160 (27401) 16574 (73724) 14721 (13625) 1897 (8438) 4133 (18384) 2291 84 (2133) (67324) 4961 (22067) 16084 (71545) 13563 (11405) 1532 (6814) 3398 (15115) 1953 96 (2438) (63516) 4045 (7993) 15520 (69036) 12226 (9844) 1273 (5662) 2886 (12837) 1708 108 (2743) (59206) 3337 (14844) 14880 (66189) 10712 (8687) 1081 (4808) 2514 (11183) 1522 120 (3048) (54384) 2784 (12384) 14164 (63004) 9019 (7077) 816 (3630) 2011 (8945) 1251** 144 (3657) (43223) 1990 (8852) 12508 (55638) 6257** (5992) 642 (2856) 1687 (7504) 1058** 168 (4267) (31951) 1464 (6512) 10550 (46929) 4597** (5191) 519 (2308) 1459 (6490) 910** 192 (4877) (24461) 1121 (4986) 8330 (37053) 3520** (4564) 429 (1908) 1285** (5716) – 216 (5486) (19327) 885 (3936) 6582** (29278) – (4048) 360 (1601) 1148** (5106) – 240 (6096) (15658) 717 (3189) 5331** (23713) – **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r 24 (609) 8190 17701 7311 17416 6214 17016 4988 16503 3816 15876 3063 15135 2564 14279 2213 13310 1953 12226 1591 9717 1347 7183 1167** 5499** 1026** 4345** 910** 3520** Reference page 14 for general fitting and standard finish specifications. 17 (34620) (78164) (28927) (76184) (22188) (73409) (15991) (69841) (12410) (65482) (10191) (60331) (8687) (54384) (7597) (47649) (6770) (40118) (5565) (27832) (4706) (20448) (4048) (15658) – – – – K = 1.2 Lbs. N 7311 17416 5612 16774 3816 15876 2790 14721 2213 13310 1846 11642 1591 9717 1401 7725 1251** 6257** 1026** 4345** 859** 3192** – – – – – – (32521) (77470) (24963) (74614) (16974) (70620) (12410) (65478) (9844) (59206) (8211) (51786) (7077) (43223) (6232) (34362) (5565) (27832) (4564) (19327) (3821) (14199) – – – – – – Channel & Combinations 15/8” (41.3) B11A 31/4” (82.5) B12 Channel & Combinations B12 •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Aluminum •Weight: 2.47 Lbs./Ft. (3.67 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 9/32” 7/8” (22.2) (7.1) Y 27/16” X X (61.9) 1.1197 (28.4) Y 13/16” (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B12 B12A Y - Y Axis Areas of Moment of Section Radius of Weight Section Inertia (I) Modulus (S) Gyration (r) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 in. cm 2.484 (3.70) .731 (4.71) .5349 (22.26) .4061 (6.65) .856 (2.17) 4.969 (7.40) 1.462 (9.43) 2.9036 (120.86) 1.1915 (19.52) 1.409 (3.58) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .3377 (14.06) .4156 (6.81) .6756 (28.12) .8315 (13.63) Radius of Gyration (r) in. cm .680 (1.73) .680 (1.73) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Y 27/16” (61.9) X Y 47/8” (123.8) X X 15/8” (41.3) X Y Y 13/16” (20.6) 1.1199 (28.4) 15/8” 27/16” (61.9) (41.3) B12A B12B Wt. 4.94 Lbs./Ft. (7.35 kg/m) Wt. 4.94 Lbs./Ft. (7.35 kg/m) Reference page 14 for general fitting and standard finish specifications. 18 31/4” (82.5) B12 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A 3880 3880* 3273 3880* 2182 3880* 1636 3880* 1309 3847* 1091 3206 935 2748 818 2404 727 2137 655 1924 .009 .001 .038 .008 .086 .028 .153 .067 .240 .130 .345 .188 .470 .255 .614 .334 .777 .422 .959 .521 (17259) (17259) (14559) (17259) (9706) (17259) (7277) (17259) (5823) (17112) (4853) (14261) (4159) (12224) (3638) (10693) (3234) (9506) (2913) (8558) (.23) (.02) (.96) (.20) (2.18) (.71) (3.88) (1.70) (6.09) (3.30) (8.76) (4.77) (11.94) (6.48) (15.59) (8.48) (19.73) (10.72) (24.36) (13.23) 3880 3880* 3273 3880* 2182 3880* 1636 3880* 1309 3847* 947 3206 696 2748 533 2404 421 2137 341 1844 (17259) (17259) (14559) (17259) (9706) (17259) (7277) (17259) (5823) (17112) (4212) (14261) (3096) (12224) (2371) (10693) (1873) (9506) (1517) (8202) 3880 3880* 3273 3880* 2182 3880* 1421 3880* 909 3847* 632 3206 464 2509 355 1921 281 1518 227 1229 (17259) (17259) (14559) (17259) (9706) (17259) (6321) (17259) (4043) (17112) (2811) (14261) (2064) (11160) (1579) (8545) (1250) (6752) (1010) (5467) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 10140 20820 9244 20519 7933 20017 6386 19315 4785 18412 3717 17309 3052 16005 2600 14500 2271 12795 2019 10889 (45105) (92612) (41119) (91273) (35288) (89040) (28406) (85917) (21285) (81900) (16534) (76994) (13576) (71194) (11565) (64499) (10102) (56915) (8981) (48436) 4752 8023 4514 7956 4137 7844 3638 7688 2963 6941 2197 5334 1717 4176 1391 3328 1155 2692 977 2202 (21138) (35688) (20079) (35390) (18402) (34892) (16182) (34198) (13180) (30875) (9773) (23727) (7637) (18576) (6187) (14803) (5137) (11974) (4346) (9795) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 10247 20854 9639 20655 8711 20324 7562 19861 6285 19265 4964 18536 3994 17675 3350 16682 2893 15556 2553 14298 (45581) (92763) (42876) (91878) (35748) (90405) (33637) (88346) (27957) (85695) (22081) (82452) (17766) (78622) (14901) (74205) (12869) (69196) (11356) (63600) K = 1.0 Lbs. N 9965 20763 8629 20293 6786 19509 4785 18412 3523 17002 2806 15278 2345 13240 2019 10889 1773 8610 1577 6974 **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 19 (44326) (92358) (38384) (90268) (30185) (86780) (21285) (81900) (15671) (75628) (12482) (67960) (10431) (58894) (8981) (48436) (7886) (38299) (7015) (31022) K = 1.2 Lbs. N 9756 20694 7933 20017 5572 18889 3717 17309 2806 15278 2271 12795 1913 9884 1650 7567 1446 5979 1279** 4843** (43397) (92051) (35288) (89040) (24785) (84022) (16534) (76994) (12482) (67960) (10102) (56915) (8509) (43966) (7339) (33659) (6432) (26596) (5689) (21543) Channel & Combinations 12 Channel Style B22 Channel B22 •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum •Weight: 1.90 Lbs./Ft. (2.83 kg/m) 15/8” 3/8” (9.5) 15/8” 3/8” (9.5) (41.3) 7/8” (22.2) Y X 9/32” (7.1) X (41.3) .7252 (18.4) Y 13/16” (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B22 B22A B22X Areas of Weight Section lbs./ft. kg/m sq. in. cm2 1.910 (2.84) .562 (3.62) 3.820 (5.69) 1.124 (7.25) 6.649 (9.89) 1.956 (12.62) Moment of Inertia (I) in.4 cm4 .1912 (7.96) .9732 (40.51) 4.1484 (172.67) Y - Y Axis Section Radius of Moment of Section Modulus (S) Gyration (r) Inertia (I) Modulus (S) in.3 cm3 in. cm in.4 cm4 in.3 cm3 .2125 (3.48) .583 (1.48) .2399 (9.99) .2953 (4.84) .5989 (9.81) .931 (2.36) .4798 (19.97) .5905 (9.68) 1.7019 (27.89) 1.456 (3.70) 1.1023 (45.88) 1.2027 (19.71) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Y 15/8” (41.3) 31/4” X X Y 13/16” (20.6) B22A 15/8” Wt. 3.80 Lbs./Ft. (5.65 kg/m) (41.3) Reference page 14 for general fitting and standard finish specifications. 20 (82.5) Radius of Gyration (r) in. cm .653 (1.66) .653 (1.66) .751 (1.91) B22 Combinations 15/8” 1.3833 (35.1) Y X Y 31/4” 31/4” (82.5) (82.5) X Y 15/8” 15/8” 31/4” (41.3) (41.3) (82.5) B22A3 Y 31/4” (82.5) 1.3250 (33.7) Wt. 7.60 Lbs./Ft. (11.31 kg/m) Y .725 (18.4) (82.5) (82.5) X X Y 31/4” 31/4” (41.3) 31/4” X (82.5) B22A4 Wt. 5.70 Lbs./Ft. (8.48 kg/m) 15/8” Y X X X 1.3540 (34.4) (41.3) Y 15/8” (41.3) B22AD3 B22B Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 3.80 Lbs./Ft. (5.65 kg/m) 27/16” Y (41.3) Y 31/4” X X X 1.9249 (48.9) Y Y Y 13/16” 31/4” (41.3) X (82.5) (20.6) .8416 (21.4) 15/8” (82.5) (41.3) B22B3 B22C Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 3.80 Lbs./Ft. (5.65 kg/m) 15/8” B22C3 (41.3) Wt. 5.70 Lbs./Ft. (8.48 kg/m) 27/16” 15/8” (61.9) (41.3) Y .769 (19.5) 47/8” (82.5) X X Y Y 31/4” X X Y .842 (21.4) (41.3) Y 31/4” (123.8) X Y 15/8” 2.467 (62.7) 1.5813 (40.2) X (82.5) Y Y 13/16” 15/8” (20.6) (41.3) B22D B22D3 Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m) (41.3) (123.8) X .769 (19.5) 15/8” 7 X 4 /8” 15/8” B22E B22E3 Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m) (41.3) 27/16” (61.9) Y X 1.795 (45.6) 1.730 (43.9) X 2” (50.8) 213/16” 1.730 (43.9) Y X X .105 (2.6) Y Y 1.231 (31.3) 1.168 (29.7) Y X .104 (2.6) .105 (2.6) 4” (101.6) (71.4) 4” (101.6) X 47/8” (123.8) B22LPL B22PL Wt. 2.90 Lbs./Ft. (4.31 kg/m) Wt. 3.35 Lbs./Ft. (4.98 kg/m) .918 (23.3) B22X Y 7/16” (11.1) 1.835 (46.6) Wt. 6.70 Lbs./Ft. (9.97 kg/m) Reference page 14 for general fitting and standard finish specifications. 21 Channel & Combinations 15/8” 47/8” (123.8) X 31/4” (82.5) X (61.9) Y 15/8” B22 Beam Loading Data Channel & Combinations Beam Span In. mm 12 (305) 18 (457) 24 (609) 30 (762) 36 (914) 42 (1067) 48 (1219) 54 (1371) 60 (1524) 66 (1676) 72 (1829) 78 (1981) 84 (2133) 90 (2286) 96 (2438) 102 (2591) 108 (2743) 114 (2895) 120 (3048) Channel Style B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X Uniform Load and Deflection Lbs. N In. mm 2610 (11610) .014 (.35) 2610* (11610) .002 (.05) 5790* (25755) .001 (.02) 2269 (10093) .031 (.79) 2610* (11610) .007 (.18) 5790* (25755) .003 (.07) 1702 (7571) .056 (1.42) 2610* (11610) .017 (.43) 5790* (25755) .008 (.20) 1361 (6054) .087 (2.21) 2610* (11610) .033 (.84) 5790* (25755) .017 (.73) 1135 (5049) .126 (3.20) 2610* (11610) .057 (1.45) 5790* (25755) .029 (.73) 972 (4323) .172 (4.37) 2610* (11610) .091 (2.31) 5790* (25755) .046 (1.17) 851 (3785) .224 (5.69) 2405 (10698) .125 (3.17) 5790* (25755) .068 (1.73) 756 (3363) .284 (7.21) 2138 (9510) .158 (4.01) 5790* (25755) .097 (2.46) 681 (3029) .351 (8.91) 1924 (8558) .195 (4.95) 5645 (25110) .130 (3.30) 619 (2753) .424 (10.77) 1749 (7780) .236 (5.99) 5132 (22828) .158 (4.01) 567 (2522) .505 (12.83) 1603 (7130) .281 (7.14) 4704 (20924) .188 (4.77) 524 (2331) .593 (15.06) 1480 (6583) .330 (8.38) 4342 (19314) .220 (5.59) 486 (2162) .687 (17.45) 1374 (6112) .383 (9.73) 4032 (17935) .255 (6.48) 454 (2019) .789 (20.04) 1283 (5707) .440 (11.17) 3763 (16738) .293 (7.44) 425 (1890) .898 (22.81) 1202 (5347) .500 (12.70) 3528 (15693) .334 (8.48) 400 (1779) 1.013 (25.73) 1132 (5035) .565 (14.35) 3320 (14768) .377 (9.57) 378 (1681) 1.136 (28.85) 1069 (4755) .633 (16.08) 3136 (13949) .422 (10.72) 358 (1592) 1.266 (32.15) 1013 (4506) .706 (17.93) 2971 (13215) .471 (11.96) 340 (1512) 1.403 (35.63) 962 (4279) .782 (19.86) 2822 (12553) .521 (13.23) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N 2610 (11610) 2610 (11610) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 2269 (10093) 2269 (10093) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 1702 (7571) 1702 (7571) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 1361 (6054) 1294 (5756) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 1135 (5049) 899 (3999) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 972 (4323) 660 (2936) 2610* (11610) 2610* (11610) 5790* (25755) 5790* (25755) 758 (3372) 505 (2246) 2405 (10698) 2405 (10698) 5790* (25755) 5790* (25755) 599 (2664) 399 (1775) 2138 (9510) 2024 (9003) 5790* (25755) 5790* (25755) 485 (2157) 323 (1437) 1924 (8558) 1640 (7295) 5645 (25110) 5645 (25110) 401 (1784) 267 (1187) 1749 (7780) 1355 (6027) 5132 (22828) 5132 (22828) 337 (1499) 225 (1001) 1603 (7130) 1139 (5066) 4704 (20924) 4704 (20924) 287 (1276) 191 (849) 1455 (6472) 970 (4315) 4342 (19314) 4270 (18994) 248 (1103) 165 (734) 1255 (5582) 837 (3723) 4032 (17935) 3682 (16378) 216 (961) 144 (640) 1093 (4862) 729 (3243) 3763 (16738) 3207 (14265) 190 (845) 126 (560) 961 (4275) 640 (2847) 3528 (15693) 2819 (12539) 168 (747) 112 (498) 851 (3785) 567 (2522) 3320 (14768) 2497 (11107) 150 (667) 100 (445) 759 (3376) 506 (2251) 3136 (13949) 2227 (9906) 134 (596) 90 (400) 681 (3029) 454 (2019) 2971 (13215) 1999 (8892) 121 (538) 81 (360) 615 (2735) 410 (1824) 2706 (12037) 1804 (8024) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. Reference page 14 for general fitting and standard finish specifications. 22 B22 Column Loading Data Unbraced Height In. mm (305) 18 (457) 24 (609) 30 (762) 36 (914) 42 (1067) 48 (1219) 54 (1371) 60 (1524) 66 (1676) 72 (1829) 78 (1981) 84 (2133) 90 (2286) 96 (2438) 102 (2591) 108 (2743) 114 (2895) 120 (3048) B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X B22 B22A B22X Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 10454 21625 46948 9950 21433 46531 9311 21164 45947 8582 20819 45198 7801 20397 44282 6998 19898 43198 6193 19322 41948 5392 18669 40530 4718 17940 38948 4202 17134 37198 3791 16251 35281 3456 15291 33197 3176 14255 30947 2936 13141 28529 2728 11951 25945 2545 10678 23182 2381 9524 20676 2234 8548 18558 2101 7715 16749 (46502) (96193) (208835) (44260) (95339) (206980) (41417) (94142) (204382) (38174) (92607) (201051) (34700) (90730) (196976) (31128) (88511) (192154) (27548) (85948) (186594) (23985) (83044) (180286) (20987) (79801) (173249) (18691) (76216) (165465) (16863) (72288) (156938) (15373) (68018) (147667) (14127) (63409) (137659) (13060) (58454) (126903) (16583) (53160) (115409) (11321) (47498) (103118) (10591) (42365) (91971) (9937) (38023) (82550) (9346) (34318) (74503) 4276 7002 18975 4153 6959 18859 3993 6898 18693 3802 6821 18485 3589 6728 18233 3360 6620 17940 3118 6496 17604 2864 6263 16973 2631 5340 14471 2434 4587 12431 2264 3968 10753 2116 3456 9366 1984 3028 8206 1867 2667 7227 1761 2359 6393 1664 2093 5672 1575 1867 5059 1494 1675 4539 1418 1512 4097 (19120) (31146) (84405) (18473) (30955) (83899) (17762) (30684) (84440) (16912) (30341) (82225) (15964) (29927) (81104) (14946) (29447) (79801) (13869) (28895) (78306) (12740) (27859) (75499) (11703) (23753) (64370) (10827) (20404) (55296) (10071) (17650) (47832) (9412) (15373) (41662) (8825) (13469) (36502) (8305) (11863) (32147) (7833) (10493) (28437) (7402) (9310) (25230) (7006) (8305) (22503) (6645) (7451) (20190) (6307) (6726) (18224) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 10598 21677 47061 10253 21551 46787 9801 21373 46401 9268 21145 45906 8676 20866 45300 8048 20537 44586 7401 20157 43761 6746 19276 42825 6093 19244 41779 5441 18712 40624 4869 18129 39358 4412 17496 37984 4037 16812 36499 3724 16077 34903 3456 15291 33197 3225 14455 31382 3022 13568 29456 2842 12630 27420 2680 11642 25275 K = 1.0 Lbs. N (47142) 10222 (96424) 21539 (209338) 46761 (45607) 9481 (95863) 21239 (208119) 46110 (43597) 8582 (95072) 20819 (206402) 45198 (41226) 7601 (94057) 20279 (204200) 44026 (38593) 6595 (92816) 19619 (201504) 42593 (35799) 5595 (91353) 18840 (198328) 40901 (32921) 4718 (89663) 17940 (194568) 38948 (30008) 4090 (87745) 16920 (190495) 36733 (27103) 3616 (85601) 15781 (185842) 34260 (24203) 3242 (83235) 14521 (180704) 31525 (21658) 2936 (80642) 13141 (175073) 28529 (19625) 2680 (77826) 11642 (168961) 25275 (17957) 2461 (74783) 10076 (162355) 21875 (16565) 2270 (71514) 8778 (155256) 19057 (15373) 2101 (68018) 7715 (147667) 16749 (14345) 1951 (64299) 6834 (139594) 14836 (13442) 1816 (60353) 6096 (131027) 13234 (12642) 1694 (56181) 5471 (121970) 11877 (11921) 1583** (51786) 4937 (112429) 10718 **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 23 (45470) (95810) (208003) (42173) (94476) (205107) (38174) (92607) (201051) (33811) (90205) (195837) (28336) (87269) (189463) (24888) (83804) (181937) (20987) (79801) (173254) (18193) (75264) (163396) (16085) (70197) (152396) (14421) (64592) (140230) (13060) (58454) (126903) (11921) (51786) (112429) (10947) (44820) (97305) (10097) (39046) (84770) (9346) (34318) (74503) (8678) (30399) (65994) (8078) (27116) (58868) (7535) (24336) (52831) (7041) (21961) (47676) K = 1.2 Lbs. N 9950 21433 46531 8955 21001 45593 7801 20397 44282 6595 19619 42593 5392 18669 40530 4444 17546 38092 3791 16251 35281 3310 14782 32092 2936 13141 28529 2634 11328 24593 2381 9524 20676 2166 8115 17617 1980 6998 15192 1816 6096 13234 1671 5357 11630 1542** 4746 10303 1426** 4233 9190 1322** 3799** 8247 1228** 3429** 7444 (44260) (95339) (206980) (39834) (93417) (202808) (34700) (90730) (196976) (29336) (87269) (189463) (23985) (83044) (180286) (19768) (78048) (169441) (16863) (72288) (156938) (14723) (65753) (142752) (13060) (58454) (126903) (11716) (50389) (109395) (10591) (42365) (91971) (9635) (36097) (78364) (8807) (31128) (67577) (8078) (27116) (58868) (7433) (23829) (51733) (6343) (21111) (45830) (68599) (18829) (40879) (5880) (16899) (36684) (5462) (15253) (33112) Channel & Combinations 12 Channel Style B24 Channel & Combinations B24 •Thickness: 14 Gauge (1.9 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum •Weight: 1.40 Lbs./Ft. (2.08 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y 15/8” X (41.3) (7.1) X .7304 (18.6) 13/16” (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B24 B24A Y Areas of Moment of Section Weight Section Inertia (I) Modulus (S) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 1.442 (2.15) .424 (2.74) .1494 (6.22) .1670 (2.74) 2.884 (4.29) .848 (5.47) .7514 (31.28) .4624 (7.58) Y - Y Axis Radius of Gyration (r) in. cm .594 (1.51) .941 (2.39) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .1857 (7.73) .2286 (3.75) .3713 (15.45) .4570 (7.49) Radius of Gyration (r) in. cm .662 (1.68) .662 (1.68) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. 15/8” Y Y 31/4” Y X 31/4” (82.5) X X (41.3) 13/16” .730 13/16” (20.6) 15/8” 15/8” (41.3) (41.3) B24B Wt. 2.80 Lbs./Ft. (4.16 kg/m) (82.5) (41.3) 15/8” B24A 31/4” Y 15/8” (18.6) (20.6) X X Y Y (82.5) X 15/8” (41.3) Wt. 2.80 Lbs./Ft. (4.16 kg/m) Reference page 14 for general fitting and standard finish specifications. 24 B24C (41.3) Wt. 2.80 Lbs./Ft. (4.16 kg/m) B24 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A 1750 1750* 1379 1750* 919 1750* 689 1750* 551 1518 460 1265 394 1084 345 949 306 843 276 759 .014 .002 .057 .014 .128 .048 .227 .115 .355 .195 .511 .281 .695 .383 .908 .500 1.149 .633 1.419 .782 (7784) (7784) (6134) (7784) (4088) (7784) (3065) (7784) (2451) (6752) (2046) (5627) (1752) (4822) (1534) (4221) (1361) (3750) (1228) (3376) (.35) (.05) (1.45) (.35) (3.25) (1.22) (5.76) (2.92) (9.02) (4.95) (12.98) (7.14) (17.65) (9.73) (23.06) (12.70) (29.18) (16.08) (36.04) (19.86) 1750 1750* 1379 1750* 919 1750* 607 1750* 389 1518 270 1265 198 990 152 758 120 599 97 485 (7784) (7784) (6134) (7784) (4088) (7784) (2700) (7784) (1730) (6752) (1201) (5627) (881) (4404) (676) (3372) (534) (2664) (431) (2157) 1750 1750* 1379 1750* 720 1750* 405 1750* 259 1294 180 898 132 660 101 505 80 399 65 323 (7784) (7784) (6134) (7784) (3203) (7784) (1801) (7784) (1152) (5756) (800) (3994) (587) (2936) (449) (2246) (356) (1775) (289) (1437) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 6441 13212 5874 12993 5038 12627 4043 12115 3008 11456 2324 10651 1898 9700 1608 8602 1397 7358 1236 6024 (28651) (58770) (26129) (57796) (22410) (56167) (17984) (53890) (13380) (50959) (10337) (47378) (8443) (43148) (7153) (38263) (6214) (32730) (5498) (26796) 3077 4988 2896 4924 2619 4819 2272 4675 1873 4020 1562 3048 1340 2362 1175 1866 1046 1498 942 1216 (13687) (22188) (12882) (21903) (11650) (21436) (10106) (20795) (8331) (17882) (6948) (13558) (5960) (10506) (5226) (8300) (4653) (6663) (4190) (5409) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 6509 13237 6124 13092 5535 12851 4800 12512 3978 12078 3123 11546 2502 10918 2089 10194 1796 9373 1578 8455 (28953) (58881) (27241) (58236) (24621) (57164) (21351) (55656) (17695) (53725) (13892) (51359) (11129) (48565) (9292) (45345) (7989) (41693) (7019) (37610) K = 1.0 Lbs. N 6330 13171 5483 12828 4302 12256 3008 11456 2200 10427 1740 9169 1444 7683 1236 6024 1078 4760 953** 3856 **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 25 (28157) (58587) (24389) (57062) (19136) (54517) (13380) (50959) (9786) (46381) (7740) (40786) (6423) (34175) (5498) (26796) (4795) (21173) (4239) (17152) K = 1.2 Lbs. N 6198 13121 5038 12627 3516 11804 2324 10651 1740 9169 1397 7358 1168 5464 1000 4184 870** 3306 764** 2677** (27570) (58365) (22410) (56167) (15640) (52507) (10337) (47378) (7740) (40786) (6214) (32730) (5195) (24305) (4448) (18611) (3870) (14706) (3398) (11908) Channel & Combinations 12 Channel Style B26 Channel & Combinations B26 •Thickness: 16 Gauge (1.5 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized •Weight: 1.12 Lbs./Ft. (1.66 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” 27/64” Y (7.1) (10.7) X 15/8” X (41.3) 27/64” .7745 (19.7) (10.7) 13/16” Y (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B26 B26A Areas of Moment of Section Weight Section Inertia (I) Modulus (S) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 1.234 (1.84) .363 (2.34) .1337 (5.57) .1581 (2.59) 2.467 (3.67) .726 (4.68) .7086 (29.49) .4361 (7.15) Y - Y Axis Radius of Gyration (r) in. cm .607 (1.54) .988 (2.51) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .1564 (6.51) .1925 (3.15) .3128 (13.02) .3850 (6.31) Radius of Gyration (r) in. cm .656 (1.67) .656 (1.67) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Y 31/4” 1 X 3 /4” 1 X 3 /4” (82.5) (82.5) X X Y .774 (20.6) (19.7) 15/8” (41.3) B26B Wt. 2.24 Lbs./Ft. (3.33 kg/m) (82.5) X Y Y 13/16” B26A (41.3) (41.3) (41.3) X Y 15/8” 5 Y 1 /8” 15/8” 13/16” 15/8” (41.3) Wt. 2.24 Lbs./Ft. (3.33 kg/m) (20.6) (41.3) B26C Wt. 2.24 Lbs./Ft. (3.33 kg/m) Reference page 14 for general fitting and standard finish specifications. 26 15/8” B26 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A 1220 1220* 1163 1220* 775 1220* 581 1220* 465 1220* 388 1052 332 902 291 789 258 702 233 631 .014 .001 .057 .012 .128 .040 .228 .096 .357 .188 .514 .281 .699 .383 .913 .500 1.156 .633 1.427 .782 (5427) (5427) (5173) (5427) (3447) (5427) (2584) (5427) (2068) (5427) (1726) (4679) (1477) (4012) (1294) (3509) (1147) (3122) (1036) (2807) (.35) (.02) (1.45) (.30) (3.25) (1.01) (5.79) (2.44) (9.07) (4.77) (13.05) (7.14) (17.75) (9.73) (23.19) (12.70) (29.36) (16.08) (36.24) (19.86) 1220 1220* 1163 1220* 775 1220* 509 1220* 326 1220* 226 1052 166 824 127 631 101 498 81 404 (5427) (5427) (5173) (5427) (3447) (5427) (2264) (5427) (1450) (5427) (1450) (4679) (738) (3665) (565) (2807) (449) (2215) (360) (1797) 1220 1220* 1163 1220* 603 1220* 339 1220* 217 1076 151 747 111 549 85 420 67 332 54 269 (5427) (5427) (5173) (5427) (2682) (5427) (1508) (5427) (965) (4786) (965) (3323) (494) (2442) (378) (1868) (298) (1477) (240) (1196) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N K = .65 Lbs. N K = 1.0 Lbs. N 4002 8151 3740 8051 3336 7883 2828 7648 2251 7346 1705 6977 1358 6541 1129 6038 967 5467 847 4830 4032 8163 3857 8096 3579 7986 3217 7831 2793 7631 2326 7388 1851 7100 1513 6767 1277 6391 1105 5970 3952 8133 3554 7975 2962 7713 2251 7346 1603 6874 1233 6298 1003 5616 847 4830 734 3940 648 3192 (17802) (36257) (16636) (35812) (14839) (35065) (12579) (34020) (10013) (32676) (7584) (31035) (6040) (29096) (5022) (26858) (4301) (24318) (3767) (21485) 2216 3630 2109 3591 1941 3528 1725 3441 1469 3066 1203 2385 1011 1884 871 1512 766 1231 684 1015 (9857) (16147) (9381) (15973) (8634) (15693) (7613) (15306) (6534) (13638) (5351) (10609) (4497) (8380) (3874) (6726) (3407) (5476) (3042) (4515) Max. Column Loading (Loaded @ C.G.) (17935) (36311) (17157) (36013) (15920) (35523) (14310) (34834) (12424) (33944) (10346) (32863) (8233) (31582) (6730) (30101) (5680) (28428) (4915) (26556) **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 27 (17579) (36177) (15809) (35474) (13175) (34309) (10013) (32676) (7130) (30577) (5484) (28015) (4461) (24981) (3767) (21485) (3265) (17526) (2882) (14199) K = 1.2 Lbs. N 3891 8109 3336 7883 2546 7505 1705 6977 1233 6298 967 5467 797 4486 680 3463 592** 2736 523** 2216** (17308) (36070) (14838) (35065) (11325) (33384) (7584) (31035) (5484) (28015) (4301) (24318) (3545) (19955) (3025) (15404) (2633) (12170) (2326) (9857) Channel & Combinations 12 Channel Style B32 Channel & Combinations B32 •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 •Weight: 1.70 Lbs./Ft. (2.53 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y (7.1) X X 13/8” (34.9) .6052 (15.4) 13/16” (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B32 B32A Y Areas of Moment of Section Weight Section Inertia (I) Modulus (S) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 1.733 (2.58) .510 (3.29) .1252 (5.21) .1626 (2.67) 3.467 (5.16) 1.020 (6.58) .6238 (25.96) .4537 (7.43) Y - Y Axis Radius of Gyration (r) in. cm .496 (1.26) .782 (1.99) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .2098 (8.73) .2582 (4.23) .4195 (17.46) .5163 (8.46) Radius of Gyration (r) in. cm .642 (1.63) .642 (1.63) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. 15/8” 15/8” Y 13/8” (41.3) (41.3) Y (34.9) Y X X 23/4” X (69.8) X 31/4” 31/4” X (82.5) (82.5) X Y Y 13/16” (20.6) .687 (17.4) .605 (15.4) 15/8” 13/8” 13/8” (41.3) (34.9) B32A B32B Wt. 3.40 Lbs./Ft. (5.06 kg/m) Wt. 3.40 Lbs./Ft. (5.06 kg/m) B32C (34.9) Wt. 3.40 Lbs./Ft. (5.06 kg/m) Reference page 14 for general fitting and standard finish specifications. 28 Y B32 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A 2210 2210* 1299 2210* 866 2210* 649 1817 520 1454 433 1211 371 1038 325 909 289 808 260 727 .016 .003 .065 .022 .147 .076 .262 .148 .410 .231 .590 .333 .803 .453 1.049 .591 1.327 .749 1.639 .924 (9830) (9830) (5778) (9830) (3852) (9830) (2887) (8082) (2313) (6468) (1926) (5387) (1650) (4617) (1445) (4043) (1285) (3594) (1156) (3234) (.40) (.07) (1.65) (.56) (3.73) (1.93) (6.65) (3.76) (10.41) (5.87) (14.98) (8.46) (20.39) (11.50) (26.64) (15.01) (33.70) (19.02) (41.63) (23.47) 2210 2210* 1299 2210* 866 2210* 495 1817 317 1454 220 1092 162 802 124 614 98 485 79 393 (9830) (9830) (5778) (9830) (3852) (9830) (2202) (8082) (1410) (6468) (978) (4857) (720) (3567) (551) (2731) (436) (2157) (351) (1748) 2210 2210* 1299 2210* 587 2210* 330 1638 211 1048 147 728 108 535 83 410 65 324 53 262 (9830) (9830) (5778) (9830) (2611) (9830) (1468) (7286) (938) (4662) (654) (3238) (480) (2380) (369) (1824) (289) (1441) (236) (1165) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 10278 21320 9104 20806 7640 19950 6151 18751 4778 17210 3870 15326 3243 13100 2774 10525 2403 8316 1993 6736 (45719) (94836) (40496) (92550) (33984) (88742) (27361) (83408) (21253) (76554) (17214) (68173) (14425) (58272) (12339) (46817) (10689) (36991) (8865) (29963) 4036 6557 3732 6431 3323 6228 2877 5954 2435 4692 2089 3448 1817 2609 1594 2014 1407 1592 1221 1289 (17953) (29167) (16601) (28606) (14781) (27703) (12797) (26485) (10831) (20871) (9292) (15337) (8082) (11605) (7090) (8959) (6258) (7081) (5431) (5734) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 10432 21378 9600 21039 8479 20474 7265 19682 6060 18665 4923 17421 4114 15951 3531 14256 3083 12334 2723 10203 (46404) (95094) (42702) (93586) (37716) (91073) (32316) (87550) (26956) (83026) (21898) (77492) (18300) (70953) (15706) (63414) (13714) (54864) (12112) (45385) K = 1.0 Lbs. N 10035 21224 8387 20421 6520 19083 4778 17210 3693 14801 2994 11858 2489 8798 1993 6736 1574** 5322 1275** 4311 **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 29 (44638) (94409) (37307) (90837) (29002) (84885) (21253) (76554) (16427) (65838) (13318) (52747) (11071) (39135) (8865) (29963) (7001) (23673) (5671) (19176) K = 1.2 Lbs. N 9753 21106 7640 19950 5425 18023 3870 15326 2994 11858 2403 8316 1807** 6110 1384** 4678 1093** 3696** 886** 2994** (43383) (93884) (33984) (88742) (24131) (80170) (17214) (68173) (13318) (52747) (10689) (36991) (8038) (27178) (6156) (20809) (4862) (16440) (3941) (13318) Channel & Combinations 12 Channel Style B42 Channel & Combinations B42 •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 •Weight: 1.44 Lbs./Ft. (2.14 kg/m) Note: Also available in 14 gauge (1.9mm) material as B44 15/8” (41.3) 3/8” 3/8” (9.5) 7/8” (9.5) (22.2) 1” (25.4) X Channel & Combinations .4226 (10.7) X - X Axis SECTION PROPERTIES B42 B42A (7.1) X Y 13/16” (20.6) Channel 9/32” Y Areas of Moment of Section Weight Section Inertia (I) Modulus (S) lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 1.468 (2.18) .432 (2.79) .0554 (2.31) .0968 (1.59) 2.936 (4.37) .864 (5.57) .2689 (11.19) .2689 (4.41) Y - Y Axis Radius of Gyration (r) in. cm .358 (.91) .558 (1.42) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .1645 (6.85) .2025 (3.32) .3292 (13.70) .4052 (6.64) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Y Y 1” (25.4) X X 2” (50.8) (82.5) Y 15/8” (41.3) 13/16” (20.6) X 31/4” X Y 15/8” (41.3) .428 (10.9) 1” (25.4) B42A B42B Wt. 2.88 Lbs./Ft. (4.28 kg/m) Wt. 2.88 Lbs./Ft. (4.28 kg/m) Reference page 14 for general fitting and standard finish specifications. 30 Radius of Gyration (r) in. cm .617 (1.57) .617 (1.57) B42 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A 1538 1590* 769 1590* 513 1428 384 1071 308 857 256 714 220 612 192 535 171 476 154 428 .022 .005 .088 .038 .198 .114 .352 .203 .550 .318 .792 .457 1.079 .623 1.409 .813 1.783 1.029 2.202 1.271 (6841) (7072) (3420) (7072) (2282) (6352) (1708) (4764) (1370) (3812) (1139) (3176) (978) (2722) (854) (2380) (760) (2117) (685) (1904) (.56) (.13) (2.23) (.96) (5.03) (2.89) (8.94) (5.15) (13.97) (8.08) (20.11) (11.61) (27.40) (15.82) (35.79) (20.65) (45.29) (26.13) (55.93) (32.28) 1538 1590* 769 1590* 388 1428 218 1053 140 674 97 468 71 344 55 263 43 208 35 168 (6841) (7072) (3420) (7072) (1726) (6352) (970) (4684) (623) (2998) (431) (2082) (316) (1530) (244) (1170) (191) (925) (155) (747) 1538 1590* 582 1590* 259 1248 145 702 93 449 65 312 48 229 36 176 29 139 23 112 (6841) (7072) (2589) (7072) (1152) (5551) (645) (3122) (413) (1997) (289) (1388) (213) (1018) (160) (783) (129) (618) (102) (498) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 9138 21094 8137 19757 7050 18094 5405 16139 3512 13906 2439 11387 1792 8645 1372** 6619 1084** 5230 878** 4236 (40648) (93831) (36195) (87883) (31360) (80486) (24042) (71790) (15622) (61857) (10849) (50652) (7971) (38455) (6103) (29443) (4822) (23264) (3905) (18842) 3493 5834 3145 5585 2722 5237 2227 4818 1718 4352 1351 3856 1087 3332 891 2873 743 2495 628 2182 (15537) (25951) (13989) (24843) (12108) (23295) (9906) (21431) (7642) (19358) (6009) (17152) (4835) (14821) (3963) (12780) (3305) (11098) (2793) (9706) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 9283 21304 8540 20299 7657 19067 6786 17632 5272 16008 3694 14200 2714 12206 2078 10012 1642 7922 1330** 6417 (41293) (94765) (37988) (90294) (34060) (84814) (30185) (78431) (23451) (71207) (16432) (64165) (12072) (54295) (9243) (44535) (7304) (35239) (5916) (28544) K = 1.0 Lbs. N 8916 20793 7589 18964 5925 16654 3512 13906 2247 10710 1561** 7531 1147** 5533 878** 4236 – 3347 – 2711** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 31 (39660) (92492) (33757) (84356) (26356) (74080) (15622) (61857) (9995) (47640) (6943) (33499) (5102) (24612) (3905) (18842) – (14888) – (12059) K = 1.2 Lbs. N 8670 20469 7050 18094 4335 15057 2439 11387 1561** 7531 1084** 5230 796** 3842 – 2942** – 2324** – 1883** (38566) (91050) (31360) (80486) (19283) (66977) (10849) (50652) (6943) (33499) (4822) (23264) (3541) (17090) – (13086) – (10337) – (8376) Channel & Combinations 12 Channel Style B52 Channel & Combinations B52 •Thickness: 12 Gauge (2.6 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized •Weight: 1.27 Lbs./Ft. (1.89 kg/m) 15/8” 3/8” (41.3) (9.5) 13/16” 7/8” (22.2) Y X (20.6) 3/8” (9.5) 9/32” (7.1) X Y 13/16” .3366 (8.5) (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B52 B52A Areas of Moment of Weight Section Inertia (I) lbs./ft. kg/m sq. in. cm2 in.4 cm4 1.313 (1.95) .386 (2.49) .0320 (1.33) 2.627 (3.91) .773 (4.99) .1517 (6.31) Section Modulus (S) in.3 cm3 .0673 (1.10) .1868 (3.06) Y - Y Axis Radius of Gyration (r) in. cm .288 (.73) .443 (1.13) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .1404 (5.84) .1728 (2.83) .2809 (11.69) .3457 (5.67) Radius of Gyration (r) in. cm .603 (1.53) .603 (1.53) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. 1.241 (31.5) Y 13/16” X (20.6) Y 27/16” 31/4” (41.3) X Y X X 15/8” (41.3) Y Y Y 13/16” 13/16” (20.6) 15/8” (82.5) 15/8” (41.3) X (20.6) X (41.3) 13/16” (20.6) 15/8” 15/8” (41.3) (41.3) B52A B52B3 B52B4 Wt. 2.54 Lbs./Ft. (3.78 kg/m) Wt. 3.81 Lbs./Ft. (5.67 kg/m) Wt. 5.08 Lbs./Ft. (7.56 kg/m) Reference page 14 for general fitting and standard finish specifications. 32 B52 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A 1079 1270* 539 1270* 360 1013 270 759 216 608 180 506 154 434 135 380 120 338 108 304 .026 .006 .106 .052 .240 .141 .427 .250 .667 .391 .960 .563 1.307 .766 1.707 1.001 2.160 1.267 2.667 1.564 (4799) (5649) (2397) (5649) (1601) (4506) (1201) (3376) (961) (2704) (800) (2251) (685) (1930) (600) (1690) (534) (1503) (480) (1352) (.66) (.15) (2.69) (1.32) (6.09) (3.58) (10.84) (6.35) (16.94) (9.93) (24.38) (14.30) (33.20) (19.45) (43.36) (25.42) (54.86) (32.18) (67.74) (39.72) 1079 1270* 506 1270* 225 1013 126 607 81 388 56 270 41 198 32 152 25 120 20 97 (4799) (5649) (2251) (5649) (1001) (4506) (560) (2700) (360) (1726) (249) (1201) (182) (881) (142) (676) (111) (534) (89) (431) 1079 1270* 337 1270* 150 719 84 404 54 259 37 180 28 132 21 101 17 80 13 65 (4799) (5649) (1499) (5649) (667) (3198) (373) (1797) (240) (1152) (164) (800) (124) (587) (93) (449) (75) (356) (58) (289) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 8407 19160 7519 17444 5397 15275 3178 12692 2034 9683 1412** 6780 1038** 4981 794** 3814 3013 2441** (37396) (85228) (33446) (77595) (24007) (67946) (14136) (56457) (9047) (43072) (6281) (30159) (4617) (22156) (3532) (16965) (13402) (10858) 3162 5290 2755 4955 2152 4496 1560 3963 1159 3383 891 2799 704 2337 570 1973 470 1684 394 1452 (14065) (23531) (12255) (22041) (9572) (19999) (6939) (17628) (5155) (15048) (3963) (12450) (3131) (10395) (2535) (8776) (2090) (7491) (1752) (6459) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 8543 19425 7879 18144 6653 16547 4785 14667 3081 12516 2139 10084 1572 7545 1203** 5777 951** 4564 770** 3697 (38001) (86407) (35047) (80708) (29594) (73605) (21285) (65242) (13705) (55674) (9515) (44856) (6992) (33562) (5351) (25697) (4230) (20301) (3425) (16445) K = 1.0 Lbs. N 8205 18777 6521 16412 3616 13376 2034 9683 1302** 6248 904** 4339 664** 3188 – 2441** – 1928** – 1562** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 33 (36497) (83524) (29007) (73004) (16085) (59499) (9047) (43072) (5791) (27792) (4021) (19301) (2953) (14181) – (10858) – (8576) – (6948) K = 1.2 Lbs. N 7989 18363 5397 15275 2511 11243 1412** 6780 904** 4339 – 3013 – 2214** – 1695** – 1339** – – (35537) (81682) (24007) (67946) (11169) (50011) (6281) (30159) (4021) (19301) – (13402) – (9848) – (7540) – (5956) – – Channel & Combinations 12 Channel Style B54 Channel & Combinations B54 •Thickness: 14 Gauge (1.9 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum •Weight: .97 Lbs./Ft. (1.44 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” 9/32” (22.2) Y 13/16” (7.1) X X (20.6) Y 13/16” .3422 (8.7) (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B54 B54A Areas of Moment of Weight Section Inertia (I) lbs./ft. kg/m sq. in. cm2 in.4 cm4 1.016 (1.51) .299 (1.93) .0263 (1.09) 2.032 (3.02) .598 (3.86) .1226 (5.10) Section Modulus (S) in.3 cm3 .0560 (.92) .1510 (2.47) Y - Y Axis Radius of Gyration (r) in. cm .297 (.75) .453 (1.15) Moment of Inertia (I) in.4 cm4 .1106 (4.60) .2212 (9.12) Section Modulus (S) in.3 cm3 .1361 (2.23) .2722 (4.46) Radius of Gyration (r) in. cm .608 (1.55) .608 (1.55) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. 1.241 (31.5) Y Y X X 15/8” Y 27/16” (41.3) 31/4” X (41.3) X X Y 13/16” (20.6) 15/8” X Y Y 13/16” (20.6) 15/8” (41.3) 13/16” 13/16” (20.6) (41.3) (82.5) (20.6) 15/8” (41.3) 15/8” (41.3) B54A B54B3 B54B4 Wt. 1.94 Lbs./Ft. (2.89 kg/m) Wt. 2.91 Lbs./Ft. (4.33 kg/m) Wt. 3.88 Lbs./Ft. (5.77 kg/m) Reference page 14 for general fitting and standard finish specifications. 34 B54 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A Uniform Load and Deflection Lbs. N In. mm Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N 870 870* 465 870* 310 832 233 624 186 499 155 416 133 357 116 312 103 277 93 250 870 870* 430 870* 191 832 108 499 69 319 48 222 35 163 27 125 21 98 17 80 .027 .005 .108 .043 .243 .141 .432 .250 .676 .391 .973 .563 1.324 .766 1.730 1.001 2.189 1.267 2.703 1.564 (3870) (3870) (2068) (3870) (1379) (3701) (1036) (2775) (827) (2219) (689) (1850) (591) (1588) (516) (1388) (458) (1232) (413) (1112) (.68) (.13) (2.74) (1.09) (6.17) (3.58) (10.97) (6.35) (17.17) (9.93) (24.71) (14.30) (33.63) (19.45) (43.94) (25.42) (55.60) (32.18) (68.65) (39.72) (3870) (3870) (1913) (3870) (849) (3701) (480) (2219) (307) (1419) (213) (987) (155) (725) (120) (556) (93) (436) (75) (356) 870 870* 287 870* 127 591 72 332 46 213 32 148 23 109 18 83 14 66 11 53 (3870) (3870) (1276) (3870) (565) (2629) (320) (1477) (204) (947) (142) (658) (102) (485) (80) (369) (62) (293) (49) (236) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 6186 12763 5464 12135 4300 11087 2703 9620 1730 7734 1201 5571 883** 4093 676** 3134 534** 2476 – 2006** (27516) (56772) (24305) (53979) (19127) (49317) (12023) (42792) (7695) (34402) (5342) (24781) (3928) (18206) (3007) (13941) (2375) (11014) – (8923) 2586 4060 2254 3857 1816 3549 1341 3169 995 2745 763 2291 603 1913 487 1616 401 1380 336 1190 (11503) (18060) (10026) (17157) (8078) (15787) (5965) (14096) (4426) (12210) (3394) (10191) (2682) (8509) (2166) (7188) (1784) (6138) (1494) (5293) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 6284 12835 5763 12420 5043 11728 3920 10759 2621 9514 1820 7992 1337 6200 1024** 4747 809** 3751 655** 3038 (27952) (57093) (25635) (55247) (22432) (52169) (17437) (47858) (11659) (42320) (8096) (35550) (5947) (27579) (4555) (21116) (3598) (16685) (2913) (13513) K = 1.0 Lbs. N 6032 12645 4968 11663 3076 10026 1730 7734 1107** 5134 769** 3566 565** 2620 – 2006** – 1585** – 1284** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 35 (26831) (56248) (22099) (51879) (13683) (44598) (7695) (34402) (4924) (22837) (3420) (15862) (2513) (11654) – (8923) – (7050) – (5711) K = 1.2 Lbs. N 5857 12501 4300 11087 2136 8729 1201 5571 769** 3566 534** 2476 – 1819** – 1393** – 1100** – – (26053) (55607) (19127) (49317) (9501) (38828) (5342) (24781) (3420) (15862) (2375) (11014) – (8091) – (6196) – (4893) – – Channel & Combinations 12 Channel Style B56 Channel & Combinations B56 •Thickness: 16 Gauge (1.5 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized •Weight: .85 Lbs./Ft. (1.26 kg/m) 15/8” (41.3) 7/8” (22.2) 3/8” (9.5) 3/8” (9.5) 9/32” Y 13/16” (20.6) (7.1) X .3706 (9.4) X Y 27/64” (10.7) 13/16” (20.6) X - X Axis Channel & Combinations SECTION PROPERTIES Channel B56 B56A Areas of Moment of Weight Section Inertia (I) lbs./ft. kg/m sq. in. cm2 in.4 cm4 .894 (1.33) .263 (1.70) .0241 (1.00) 1.789 (2.66) .526 (3.39) .1205 (5.02) Section Modulus (S) in.3 cm3 .0546 (.89) .1484 (2.43) Y - Y Axis Radius of Gyration (r) in. cm .303 (.77) .479 (1.22) Moment of Section Inertia (I) Modulus (S) in.4 cm4 in.3 cm3 .0966 (4.02) .1189 (1.95) .1931 (8.04) .2377 (3.89) Radius of Gyration (r) in. cm .606 (1.54) .606 (1.54) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. Y 31/4” Y Y 15/8” X X (41.3) 27/16” (61.9) X X (82.5) X X 13/16” (20.6) Y 13/16” (20.6) 15/8” Y 13/16” Y 1.207 (30.7) 15/8” (41.3) 13/16” (20.6) 15/8” (41.3) (41.3) B56A B56B3 Wt. 1.70 Lbs./Ft. (2.53 kg/m) Wt. 2.55 Lbs./Ft. (3.79 kg/m) (20.6) B56B4 (41.3) Wt. 3.40 Lbs./Ft. (5.06 kg/m) Reference page 14 for general fitting and standard finish specifications. 36 15/8” B56 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A Uniform Load and Deflection Lbs. N In. mm Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N 610 610* 405 610* 270 610* 202 530 162 424 135 353 116 303 101 265 90 236 81 212 610 610* 372 610* 165 610* 93 423 59 271 41 188 30 138 23 106 18 84 15 68 .027 .004 .109 .035 .245 .121 .435 .250 .680 .391 .980 .563 1.334 .766 1.742 1.001 2.205 1.267 2.722 1.564 (2713) (2713) (1801) (2713) (1201) (2713) (898) (2357) (720) (1886) (600) (1570) (516) (1348) (449) (1179) (400) (1050) (360) (943) (.68) (.10) (2.77) (.89) (6.22) (3.07) (11.05) (6.35) (17.27) (9.93) (24.89) (14.30) (33.88) (19.45) (44.24) (25.42) (56.01) (32.18) (69.14) (39.72) (2713) (2713) (1655) (2713) (734) (2713) (413) (1881) (262) (1205) (182) (836) (133) (614) (102) (471) (80) (373) (67) (302) 610 610* 248 610* 110 502 62 282 40 181 28 125 20 92 15 71 12 56 10 45 (2713) (2713) (1103) (2713) (489) (2233) (276) (1699) (178) (805) (124) (556) (89) (409) (67) (316) (53) (249) (44) (200) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Channel Style B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 4968 10237 4367 9762 3572 8969 2335 7860 1495 6434 1038 4731 763** 3476 584** 2661 461** 2103 – 1703** (22099) (45536) (19425) (43423) (15889) (39896) (10386) (34963) (6650) (28620) (4617) (21044) (3394) (15462) (2598) (11837) (2050) (9354) – (7575) 2182 3365 1903 3202 1557 2955 1164 2649 862 2307 661 1937 522 1619 422 1368 348 1169 291 1008 (9706) (14968) (8465) (14243) (6926) (13144) (5178) (11783) (3834) (10262) (2940) (8616) (2322) (7201) (1877) (6085) (1548) (5200) (1294) (4484) Max. Column Loading (Loaded @ C.G.) K = .65 Lbs. N 5044 10291 4624 9977 4034 9454 3290 8722 2264 7780 1572 6629 1155 5269 884** 4031 699** 3185 566** 2580 (22437) (45776) (20568) (44380) (17944) (42053) (14634) (38797) (10071) (34607) (6992) (29487) (5137) (23437) (3932) (17931) (3109) (14167) (2417) (11476) K = 1.0 Lbs. N 4845 10148 3985 9405 2658 8167 1495 6434 957 4360 664** 3028 488** 2224 – 1703** – 1346** – 1090** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 14 for general fitting and standard finish specifications. 37 (21551) (45140) (17726) (41835) (11823) (36328) (6650) (28620) (4257) (19394) (2953) (13469) (2171) (9893) – (7575) – (5987) – (4848) K = 1.2 Lbs. N 4702 10039 3572 8969 1845 7186 1038 4731 664** 3028 461** 2103 – 1545** – 1183** – 934** – – (20915) (44655) (15889) (39896) (8207) (31965) (4617) (21044) (2953) (13469) (2050) (9354) – (6872) – (5262) – (4154) – – Channel & Combinations 12 Channel Style Telescoping Channel BTS22TH •Can be secured at any point of system •Order BTS22TH & B22TH separately •Thickness: 12 Gauge (1.5 mm) •Standard lengths: 10’ (3.05 m) •Standard finishes: Dura-Green, Yellow Zinc Dichromate, Hot-Dipped Galvanized Slip Load Data Resistance to slip* 700 lbs. Resistance to slip* 3600 lbs. Channel & Combinations 1/4” thick 2-hole fitting with (2) 1/2” bolts & channel nuts. Typical of many standard fittings. 1/2” bolt & nut *With a safety factor of 3 BTS22TH TELESCOPING STRUT Fits over all 15/8” x 15/8” channels 9/16” holes on 17/8” centers 12 gauge material thickness Section Properties Weight Area Channel lbs./ft. In2 BTS22TH 1.934 0.4578 X-X Axis Cx Ix Sx rx In In4 In3 In 1.0009 0.2525 0.2523 0.7426 Y-Y Axis Cy Iy Sy ry In In4 In3 In 0.9375 0.2757 0.2941 0.7761 7/8” Y Cy Cx 17/8” X X CL Y 17/8” Section properties are based on nominal metal thickness, and overall dimensions. B22TH THREE HOLE STRUT 9/16” holes on 17/8” centers 12 gauge material thickness Section Properties Weight Area Channel lbs./ft. In2 B22TH 1.760 0.3863 Y Cy X-X Axis Cx Ix Sx rx In In4 In3 In 0.8245 0.1596 0.1936 0.6400 Y-Y Axis Cy Iy Sy ry In In4 In3 In 0.8125 0.1719 0.2116 0.6642 7/8” Cx 15/8” X Section Properties Channel Weight Area Combination lbs./ft. In2 BTS22TH/B22TH 3.597 0.8474 CL Y 15/8” Section properties are based on nominal metal thickness, and overall dimensions. COMBINATION OF BTS22TH & B22TH Y X-X Axis Cx Ix Sx rx In In4 In3 In 0.9773 0.4126 0.4222 0.6978 Y-Y Axis Cy Iy Sy ry In In4 In3 In 0.9375 0.4476 0.4774 0.7268 Section properties are based on nominal metal thickness, and overall dimensions. Reference page 14 for general fitting and standard finish specifications. 38 X Cy 7/8” Cx 17/8” X CL Y 17/8” X Telescoping Channel BEAM LOADING DATA B22TH Beam Span in 12 24 36 48 60 72 84 96 108 120 Beam Load Data x-x Axis Allowable Resulting Allowable Load Load Deflection @ Deflection= lbs* in 1/240 Span 2225 1610 1071 800 637 528 449 390 344 306 0.015 0.061 0.136 0.243 0.379 0.546 0.743 0.970 1.228 1.516 Beam Span 3225 1610 1071 658 417 286 206 153 116 90 B22TH BTS22TH 12 24 36 48 60 72 84 96 108 120 Beam Load Data x-x Axis Allowable Resulting Allowable Load Load Deflection @ Deflection= lbs* in 1/240 Span 4203 2099 1396 1044 831 689 587 510 450 401 0.012 0.050 0.112 0.200 0.312 0.450 0.612 0.799 1.012 1.249 Beam Span 4203 2099 1396 1044 664 456 330 248 190 149 BTS22TH BTS22TH & B22TH TELESCOPING MEMBERS OF EQUAL LENGTH Beam Span in 12 24 36 48 60 72 84 96 108 120 Beam Load Data x-x Axis Allowable Resulting Allowable Load Load Deflection @ Deflection= lbs* in 1/240 Span 7033 3511 2335 1745 1389 1151 980 851 749 668 0.013 0.051 0.115 0.205 0.320 0.460 0.627 0.819 1.036 1.279 Beam Span 7033 3511 2335 1705 1082 742 536 401 307 239 BTS22TH & B22TH *Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) with adequate lateral bracing (see page 11 for further explanation). To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. Reference page 14 for general fitting and standard finish specifications. 39 Channel & Combinations Beam Span in Channel Hole Patterns B11SH THRU B56SH SH TYPE CHANNEL •For beam loads use 90% of Channel Loading Chart Part No. B11SH B12SH B22SH B24SH B26SH B32SH B42SH B52SH B54SH B56SH Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 31/4” (82.5) 27/16” (61.9) 15/8” (41.3) 5 1 /8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) Weight Lbs./Ft. kg/m 2.97 (4.42) 2.39 (3.55) 1.82 (2.71) 1.34 (1.99) 1.07 (1.59) 1.62 (2.41) 1.36 (2.02) 1.19 (1.77) .91 (1.35) .80 (1.19) 2” (50.8) TYP. 9/16” x 11/8” SLOTS (14.3) (28.6) H B11S THRU B56S S TYPE CHANNEL Channel & Combinations •For beam loads use 90% of Channel Loading Chart Part No. B11S B12S B22S B24S B26S B32S B42S B52S B54S B56S Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 31/4” (82.5) 27/16” (61.9) 15/8” (41.3) 15/8” (41.3) 15/8” (41.3) 3 1 /8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) Weight Lbs./Ft. kg/m 2.94 (4.37) 2.36 (3.51) 1.79 (2.66) 1.32 (1.96) 1.06 (1.58) 1.59 (2.36) 1.33 (1.98) 1.16 (1.72) .89 (1.32) .79 (1.17) 4” (101.6) TYP. 13/32” x (10.3) 3” SLOTS (76.2) H B11H17/8 THRU B56H17/8 H17/8 TYPE CHANNEL •For beam loads use 90% of Channel Loading Chart Part No. B11H17/8 B12H17/8 B22H17/8 B24H17/8 B26H17/8 B32H17/8 B42H17/8 B52H17/8 B54H17/8 B56H17/8 Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 1 3 /4” (82.5) 27/16” (61.9) 15/8” (41.3) 15/8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) Weight Lbs./Ft. kg/m 3.00 (4.46) 2.42 (3.60) 1.85 (2.75) 1.36 (2.02) 1.09 (1.62) 1.65 (2.45) 1.39 (2.07) 1.22 (1.81) .93 (1.38) .82 (1.22) 17/8” (47.6) TYP. 9/16” DIA. HOLES (14.3) H Reference page 14 for general fitting and standard finish specifications. 40 Channel Hole Patterns B22TH (TH TYPE CHANNEL) 9/16” DIA. HOLES •For beam loads use 90% of Channel Loading Chart (14.3) Part No. B22TH Thickness 12 Ga. (2.6) Height H In. mm 15/8” (41.3) Weight Lbs./Ft. kg/m 1.76 (2.62) 17/8” TYP. (47.6) 15/16” H (23.8) 13/16” (20.6) B11KO6 THRU B56KO6 (KO6 TYPE KNOCKOUT CHANNEL) •For beam loads use 90% of Channel Loading Chart Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 31/4” (82.5) 27/16” (61.9) 15/8” (41.3) 15/8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) Weight Lbs./Ft. kg/m 3.05 (4.54) 2.47 (3.67) 1.90 (2.83) 1.40 (2.08) 1.12 (1.66) 1.70 (2.53) 1.44 (2.14) 1.27 (1.89) .97 (1.44) .85 (1.26) Channel & Combinations Part No. B11KO6 B12KO6 B22KO6 B24KO6 B26KO6 B32KO6 B42KO6 B52KO6 B54KO6 B56KO6 6” TYP. (152.4) 3” TYP. (76.2) 7/8” DIA. K.O. H (22.2) B22SHA (BACK TO BACK SH TYPE CHANNEL) •For beam loads use 90% of Channel Loading Chart 9/16” (14.3) Part No. B22SHA Thickness 12 Ga. (2.6) Height H In. mm 31/4” (82.5) x 11/8” SLOTS (28.6) Weight Lbs./Ft. kg/m 3.64 (5.42) 2” TYP. (50.8) H Reference page 14 for general fitting and standard finish specifications. 41 Channel Hole Patterns BK22H112 THRU BK54H112 H11/2 TYPE CHANNEL TICK MARKS 11/2” (38.1) TYP. •For beam loads use 90% of Channel Loading Chart •Standard Finish: Yellow Zinc Chromate (YZN) Other finishes available. Part No. BK22H112 BK24H112 BK52H112 BK54H112 Height H In. mm Thickness 12 Ga. 14 Ga. 12 Ga. 14 Ga. (2.6) (1.9) (2.6) (1.9) 15/8” 15/8” 13/16” 13/16” (41.3) (41.3) (20.6) (20.6) Weight Lbs./Ft. kg/m 1.85 1.36 1.22 .93 (2.75) (2.02) 9/16” (14.3) DIA. HOLES 11/2” (38.1) (1.81) TYP. (1.38) H 6” (152.4) ON CENTER TICK MARKS B11S58 THRU B56S58 Channel & Combinations S58 TYPE CHANNEL •For beam loads use 90% of Channel Loading Chart Part No. B11S58 B12S58 B22S58 B24S58 B26S58 B32S58 B42S58 B52S58 B54S58 B56S58 Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 31/4” (82.5) 27/16” (61.9) 15/8” (41.3) 5 1 /8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) 13/8” (34.9) Weight Lbs./Ft. kg/m 2.94 (4.37) 2.36 (3.51) 1.79 (2.66) 1.32 (1.96) 1.06 (1.58) 1.59 (2.36) 1.33 (1.98) 1.16 (1.72) .89 (1.32) .79 (1.17) TYP. 11/16” (101.6) x 25/8” (17.5) x (66.7) SLOTS 11/16” H B22M THRU B54M M (MARINE RUNG) TYPE CHANNEL •For beam loads use 90% of Channel Loading Chart Part No. B22M B24M B32M B42M B44M B52M B54M Thickness 12 Ga. (2.6) 14 Ga. (1.9) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 12 Ga. (2.6) 14 Ga. (1.9) Height H In. mm 15/8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 1” (25.4) 13/16” (20.6) 13/16” (20.6) Weight Lbs./Ft. kg/m 1.79 (2.66) 1.32 (1.96) 1.59 (2.36) 1.33 (1.98) 0.98 (1.46) 1.16 (1.72) .89 (1.32) NEW 1” (25.4) x 11/16” (6.3) x (17.5) SLOTS 1/4” 1/2” 1/2” (38.1) (38.1) 6” (152.4) H Reference page 14 for general fitting and standard finish specifications. 42 Channel Hole Patterns & Hole Punch B22H25 THRU B56H25 H25 TYPE CHANNEL •For beam loads use 90% of Channel Loading Chart Part No. B22H25 B24H25 B26H25 B32H25 B42H25 B52H25 B54H25 B56H25 Height H In. mm Thickness 12 Ga. 14 Ga. 16 Ga. 12 Ga. 12 Ga. 12 Ga. 14 Ga. 16 Ga. (2.6) (1.9) (1.5) (2.6) (2.6) (2.6) (1.9) (1.5) 15/8” 15/8” 15/8” 13/8” 1” 13/16” 13/16” 13/16” NEW Weight Lbs./Ft. kg/m (41.3) (41.3) (41.3) (34.9) (25.4) (20.6) (20.6) (20.6) 1.85 1.36 1.09 1.65 1.39 1.22 .93 .82 (2.75) (2.02) 2” (1.62) (50.8) (2.45) (2.07) 1” (1.81) (25.4) 9/32” DIA. HOLES (7.1) (1.38) (1.22) H Channel & Combinations B96HP CHANNEL PUNCH •Field-punch holes exactly where you want them in any type channel...Quick and easy! •Any size holes...anywhere you need them...with on-the-job convenience! •Channel punch will work on any standard single channels that have solid backs. •Do not use this punch on combination, stainless steel, or KO6 channels. Die Blocks Only Part No. Hole Size 9 B96HP-0.562D B96HP-0.438D B96HP-0.281D /16” /16” 9 /32” 1 /2” /8” 1 /4” (14.3) 7 Weight Each Lbs. kg Bolt Size 3 (11.1) (7.1) .50 .50 .50 (12.7) (9.5) (6.3) Punch & Die Block Assembly Part No. Hole Size B96HP-0.562 B96HP-0.438 B96HP-0.281 9 /16” 7 /16” 9 /32” (14.3) (11.1) (7.1) Bolt Size 1 /2” 3 /8” 1 /4” (12.7) (9.5) (6.3) Weight Each Lbs. kg 24.5 24.5 24.5 Reference page 14 for general fitting and standard finish specifications. 43 (11.1) (11.1) (11.1) (.2) (.2) (.2) Channel Nuts & Hardware Channel Nuts B-Line’s channel nut is one of the main components of our metal framing system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and hardened from steel which meets the requirements of ASTM A108 or ASTM A36 for our larger sizes. Bolts, Screws, and Nuts All bolts, screws and nuts meet the physical and chemical requirements of ASTM A307, SAE J429 or ASTM A563, and have unified inch screw threads (coarse, UNC). ISO metric threads are also available on special request. Recommended Torque Bolt Size Foot/Lbs. Nm 1/4”-20 5/16”-18 3/8”-16 1/2”-13 6 8 11 15 19 26 50 68 Bolt Size NM M6x1 12 M8 x1.25 17 Foot/Lbs. 9 13 M10 x 1.5 M12x1.75 36 62 27 46 Channel Nuts & Hardware Materials & Finishes* Finish Code Finish PLN Plain ZN CZ HDG SS4 SS6 AL Electro-Plated Zinc Chromium Zinc Hot-Dipped Galvanized Stainless Steel Type 304 Stainless Steel Type 316 Aluminum Specification ASTM A108/A307 Gr. A, ASTM A563, SAE J429 ASTM B633 SC1 Type III ASTM F1136 Gr. 3 ASTM A153 ASTM F593 MPIF 35/ASTM A593 ASTM F468 S4 *Unless otherwise noted. Note: Channel nuts are not available in HDG or Aluminum Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 44 Channel Nuts & Hardware STANDARD CHANNEL NUTS N 7 25 (*) WO Numbering Example: Nut Type N = Standard Nut TN = Twirl Nut SN = Stud Nut STN = Stud Twirl Nut FN = FN Nut NW = Combo Nut Washer Channel Type 7 = Tall Channels B11 B12 2 = Medium Channels B22 B24 B26 B32 5 = Short Channels B42 B52 B54 B56 Thread Size 21 = #8-32 22 = #10-24 27 = #10-32 24 = 1/4-20 23 = 5/16-18 28 = 3/8-16 26 = 7/16-14 25 = 1/2-13 55 = 5/8-11 75 = 5/8-11 78 = 7/8-9 Stud Length * = Specify Length of stud below for Stud Nut or Twirl Stud Nuts 3/4 = 3/4” 1 = 1” 11/4 = 11/4” 11/2 = 11/2” Suffix WO = Without Spring ** = Twirl Nuts or nuts with springs have blank suffix METRIC CHANNEL NUTS Numbering Example: BMS 6 M Nut Metric Type Thread Size BMS = Spring Nut 3 = M3.5 1 BMS-D = Spring Nut ( /2” thick) 4 = M4 BMT = Twirl Nut 5 = M5 6 = M6 BMT-D = Twirl Nut (1/2” thick) BFN = FN Nut 8 = M8 BMM = Spring Nut (Mini channel) 10 = M10 12 = M12 S = Short Spring M = Medium Spring L = Long Spring * = Twirl Nuts and nuts without springs have blank suffix NUT WITHOUT SPRING STUD NUT WITH SPRING FN NUT Patented TWIRL-NUT® STUD NUT WITHOUT SPRING TWIRL STUD NUT Reference page 44 for general fitting and standard finish specifications. 45 Channel Nuts & Hardware SPRING NUT Suffix Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. NUT WITHOUT SPRING Part No. N221WO N227WO N222WO N224WO N223WO N228WO N226WO N225WO N525WO N255WO N555WO N275WO N575WO N278WO Thread Size Fits Channel Sizes Nut Thickness #8-32 #10-32 #10-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 1/2-13 5/8-11 5/8-11 3/4-10 3/4-10 7/8-9 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 B11, B12, B22, B24, B26, B32 B42, B52, B54, B56 B11, B12, B22, B24, B26, B32 B42, B52, B54, B56 B11, B12, B22, B24, B26, B32 B42, B52, B54, B56 B11, B12, B22, B24, B26, B32 1/4” M6 x 1 M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.75 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 B11, B12, B22, B24, B26, B32 (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” (12.7) 3/8” (9.5) 1/2” (12.7) 3/8” (9.5) 1/2” (12.7) 3/8” (9.5) 1/2” (12.7) 1/4” (6.3) 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” (12.7) Wt./C Lbs. kg 7.0 7.0 7.0 6.7 6.7 9.3 8.8 11.6 8.8 16.4 10.2 14.5 8.8 12.5 (3.17) 6.9 6.7 9.6 9.2 12.2 (3.13) (3.17) (3.17) (3.04) (3.04) (4.22) (3.99) (5.26) (3.99) (7.44) (4.62) (6.58) (3.99) (5.67) Channel Nuts & Hardware Metric Threads BMS-6 BMS-8 BMS-10 BMS-12 BMS-D-12 Note: For mini channel nut information see page 191. Reference page 44 for general fitting and standard finish specifications. 46 (3.04) (4.35) (4.17) (5.53) Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. 700 SERIES 200 SERIES 500 SERIES SPRING NUT Part No. Metric Threads BMS-6L BMS-6M BMS-6S BMS-8L BMS-8M BMS-8S BMS-10L BMS-10M BMS-10S BMS-12M BMS-12S BMS-D-12L BMS-D-12M Fits Channel Sizes Nut Thickness Wt./C Lbs. kg #8-32 #8-32 #8-32 #10-32 #10-32 #10-32 #10-24 #10-24 #10-24 1/4-20 1/4-20 1/4-20 5/16-18 5/16-18 5/16-18 3/8-16 3/8-16 3/8-16 7/16-14 7/16-14 7/16-14 1/2-13 1/2-13 1/2-13 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 1/4” (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (9.5) (9.5) (9.5) (9.5) (9.5) (9.5) (12.7) (12.7) (9.5) (12.7) (12.7) (9.5) (12.7) (12.7) (9.5) (12.7) (12.7) 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 6.7 6.7 6.7 6.7 6.7 6.7 9.3 9.3 9.3 8.8 8.8 8.8 11.6 11.6 8.8 16.4 16.4 10.2 14.5 14.5 8.8 12.5 12.5 (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.17) (3.04) (3.04) (3.04) (3.04) (3.04) (3.04) (4.22) (4.22) (4.22) (3.99) (3.99) (3.99) (5.26) (5.26) (3.99) (7.44) (7.44) (4.62) (6.58) (6.58) (3.99) (5.67) (5.67) M6 x 1 M6 x 1 M6 x 1 M8 x 1.25 M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 B42, B52, B54, B56 B22, B24, B26, B32 B42, B52, B54, B56 B11 & B12 B22, B24, B26, B32 1/4” (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (9.5) (9.5) (9.5) (9.5) (9.5) (12.7) (12.7) 6.9 6.9 6.9 6.7 6.7 6.7 9.6 9.6 9.6 9.2 9.2 12.2 12.2 (3.13) (3.13) (3.13) (3.04) (3.04) (3.04) (4.35) (4.35) (4.35) (4.17) (4.17) (5.53) (5.53) 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 3/8” 1/2” 1/2” 3/8” 1/2” 1/2” 3/8” 1/2” 1/2” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” Note: For mini channel nut information see page 191. Reference page 44 for general fitting and standard finish specifications. 47 Channel Nuts & Hardware N721 N221 N521 N727 N227 N527 N722 N222 N522 N724 N224 N524 N723 N223 N523 N728 N228 N528 N726 N226 N526 N725 N225 N525 N755 N255 N555 N775 N275 N575 N778 N278 Thread Size Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. TWIRL-NUT® Patented Part No. TN221 TN227 TN222 TN224 TN223 TN228 TN226 TN225 TN525 TN255 Metric Threads BMT-6 BMT-8 BMT-10 BMT-12 BMT-D-12 Thread Size #8-32 #10-32 #10-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 1/2-13 5/8-11 M6 x 1 M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.75 Fits Channel Sizes All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 B11, B12, B22, B24, B26, B32 B42, B52, B54, B56 B11, B12, B22, B24, B26, B32 1/4” 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” 3/8” (12.7) 1/2” (12.7) All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 All sizes except B62 & B72 B11, B12, B22, B24, B26, B32 1/4” 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” (12.7) Channel Nuts & Hardware Metric Threads (6.3) (9.5) (6.3) Wt./C Lbs. kg 7.0 7.0 7.0 6.7 6.7 9.3 8.8 11.6 8.8 11.0 (3.17) 6.9 6.7 9.6 9.2 12.2 (3.13) (3.17) (3.17) (3.04) (3.04) (4.22) (3.99) (5.26) (3.99) (4.99) (3.04) (4.35) (4.17) (5.53) Note: See page 50 for resistance to slip & page 51 for pull-out strength. FN NUT Part No. Nut Thickness Thread Size Fits Channel Sizes Nut Thickness Wt./C Lbs. kg FN224 1/4-20 All sizes except B62 & B72 .31 (7.9) 5.4 (2.45) FN228 3/8-16 All sizes except B62 & B72 .31 (7.9) 5.4 (2.45) BFN-6 M6 x 1 All sizes except B62 & B72 .31 (7.9) 5.4 (2.45) BFN-8 M8 x 1.25 All sizes except B62 & B72 .31 (7.9) 5.4 (2.45) BFN-10 M10 x 1.5 All sizes except B62 & B72 .31 (7.9) 5.4 (2.45) Note: See page 50 for resistance to slip & page 51 for pull-out strength. STUD TWIRL NUT Part No. Thread Size STN224-* 1/4-20 STN228-* 3/8-16 STN225-* 1/2-13 STN525-* 1/2-13 Fits Channel Sizes Nut Thickness Ave. Wt./C Lbs. kg All sizes except B62 & B72 1/4” (6.3) 8.1 (3.66) All sizes except B62 & B72 3/8” (9.5) 12.9 (5.85) B11, B12, B22, B24, B26, B32 1/2” (12.7) 18.2 (8.23) B42, B52, B54, B56 3/8” (9.5) 15.4 (6.96) *Note: Add stud length in inches (3/4, 1, 11/4, 11/2) Reference page 44 for general fitting and standard finish specifications. 48 Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. STUD NUT WITHOUT SPRING Part No. Thread Size Fits Channel Sizes Nut Thickness Ave. Wt./C Lbs. kg (6.3) 8.1 (3.66) SN224-*WO 1/4-20 All sizes except B62 & B72 1/4” SN228-*WO 3/8-16 All sizes except B62 & B72 3/8” (9.5) 12.9 (5.85) SN225-*WO 1/2-13 B11, B12, B22, B24, B26, B32 1/2” (12.7) 18.2 (8.23) SN525-*WO 1/2-13 B42, B52, B54, B56 3/8” (9.5) 15.4 (6.96) *Note: Add stud length in inches (3/4, 1, 11/4, 11/2) Note: See page 50 for resistance to slip & page 51 for pull-out strength. 700 SERIES 200 SERIES 500 SERIES STUD NUT WITH SPRING Part No. Thread Size SN724-* 1/4-20 SN224-* 1/4-20 Fits Channel Sizes Nut Thickness Ave. Wt./C Lbs. kg (6.3) 8.1 (3.66) B22, B24, B26, B32 1/4” (6.3) 8.1 (3.66) SN524-* 1/4-20 B42, B52, B54, B56 1/4” (6.3) 8.1 (3.66) SN728-* 3/8-16 B11 & B12 3/8” (9.5) 12.9 (5.85) SN228-* 3/8-16 B22, B24, B26, B32 3/8” (9.5) 12.9 (5.85) SN528-* 3/8-16 B42, B52, B54, B56 3/8” (9.5) 12.9 (5.85) SN725-* 1/2-13 B11 & B12 1/2” (12.7) 18.2 (8.23) SN225-* 1/2-13 B22, B24, B26, B32 1/2” (12.7) 18.2 (8.23) SN525-* 1/2-13 B42, B52, B54, B56 3/8” (9.5) 15.4 (6.96) *Note: Add stud length in inches (3/4, 1, 11/4, 11/2) •Finish: Electrodeposited zinc ASTM B633 SC1 •Available in 316 stainless steel - add SS6 to part number NEW Note: See page 50 for resistance to slip & page 51 for pull-out strength. COMBO NUT WASHER Part No. Thread Size Fits Channel Sizes Nut Thickness Lbs. kg NW524 1/4-20 All Channel Sizes 1/4” (6.3) 11.9 (5.40) NW528 3/8-16 All Channel Sizes 3/8” (9.5) 13.8 (6.26) NW525 1/2-13 All Channel Sizes 3/8” (9.5) 13.1 (5.94) Reference page 44 for general fitting and standard finish specifications. 49 Ave. Wt./C Channel Nuts & Hardware B11 & B12 1/4” Channel Nuts RESISTANCE TO SLIP •With Safety Factor of 3 Resistance to Slip Thread Size Nut Part Numbers #8-32 N221, N221WO,N521, N721, TN221 50 220 50 220 50 220 #10-24 N222, N222WO, N522, N722, TN222 100 440 100 440 100 440 #10-32 N227, N227WO, N527, N727, TN227 100 440 100 440 100 440 1/4”-20 NW524*, FN224, N224,N224WO, N524, N724, TN224, STN224, SN224WO, SN224, SN524, SN724 300 1330 300 1330 300 1330 5/16”-18 N223, N223WO, N523, N723, TN223 450 2000 450 2000 450 2000 3/8”-16 NW528*, FN228, N228, N228WO, N528, N728 TN228, STN228, SN228WO, SN228, SN528, SN728 800 3560 600 2670 600 2670 7/16”-14 N226, N226WO, N526, N726, TN226 1000 4450 800 3560 800 3560 N225, N225WO, N725, TN225, STN225, SN225WO, SN225, SN725 1500 6670 1000 4450 1000 4450 NW525*, N525, N525WO, TN525, STN525, SN525WO, SN525 1500 6670 1000 4450 1000 4450 N255, N255WO, N755, TN255 N555, N555WO N275, N275WO, N775 N575, N575WO 1500 1500 1500 1500 6670 6670 6670 6670 1000 1000 1000 1000 4450 4450 4450 4450 1000 1000 1000 1000 4450 4450 4450 4450 7/8”-9 N278, N278WO, N778 1500 6670 1000 4450 1000 4450 M6 x 1 BMS-6, BMS-6L, BMS-6M, BMS-6S, BFN-6, BMT-6 300 1330 300 1330 300 1330 M8 x 1.25 BMS-8, BMS-8L, BMS-8M, BMS-8S, BFN-8, BMT-8 450 2000 450 2000 450 2000 M10 x 1.50 BMS-10, BMS-10L, BMS-10M, BMS-10S, BFN-10, BMT-20 800 3560 600 2760 600 2760 BMS-D-12, BMS-D-12L, BMS-D-12M, BMT-D-12 1500 6670 1000 4450 1000 4450 BMS-12, BMS-12M, BMS-12S, BMT-12 1500 6670 1000 4450 1000 4450 1/2”-13 5/8”-11 Metric Threads Channel Nuts & Hardware 3/4”-10 M12 x 1.75 12 ga. Channel Lbs. N 14 ga. Channel Lbs. N * Combo Nut Washer (see page 49) Resistance to Slip of Channel Nut Note: For mini channel nut information see page 191. Reference page 44 for general fitting and standard finish specifications. 50 16 ga. Channel Lbs. N Channel Nuts PULL-OUT STRENGTH •With Safety Factor of 3 •Maximum pullout strength for B11 & B12 channels is limited to 1500 lbs. (6670 N). Pull-Out Strength Thread Size Nut Part Numbers #8-32 N221, N221WO,N521, N721, TN221 200 890 200 890 200 890 #10-24 N222, N222WO, N522, N722, TN222 250 1110 250 1110 250 1110 #10-32 N227, N227WO, N527, N727, TN227 250 1110 250 1110 250 1110 1/4”-20 NW524*, FN224, N224,N224WO, N524, N724, TN224, STN224, SN224WO, SN224, SN524, SN724 450 2000 450 2000 450 2000 5/16”-18 N223, N223WO, N523, N723, TN223 750 3330 750 3330 750 3330 3/8”-16 NW528*, FN228, N228, N228WO, N528, N728 TN228, STN228, SN228WO, SN228, SN528, SN728 1100 4890 1000 4450 1000 4450 7/16”-14 N226, N226WO, N526, N726, TN226 1500 6670 1200 5340 1000 4450 N225, N225WO, N725, TN225, STN225, SN225WO, SN225, SN725 2000 8900 1400 6230 1000 4450 NW525*, N525, N525WO, TN525, STN525, SN525WO, SN525 1500 6670 1400 6230 1000 4450 N255, N255WO, N755, TN255 N555, N555WO N275, N275WO, N775 N575, N575WO 2000 1500 2000 1500 8900 6670 8900 6670 1400 1400 1400 1400 6230 6230 6230 6230 1000 1000 1000 1000 4450 4450 4450 4450 7/8”-9 N278, N278WO, N778 1500 6670 1400 6230 1000 4450 M6 x 1 BMS-6, BMS-6L, BMS-6M, BMS-6S, BFN-6, BMT-6 450 2000 450 2000 450 2000 M8 x 1.25 BMS-8, BMS-8L, BMS-8M, BMS-8S, BFN-8, BMT-8 750 3330 750 3330 750 3330 M10 x 1.50 BMS-10, BMS-10L, BMS-10M, BMS-10S, BFN-10, BMT-20 1100 4890 1000 4450 1000 4450 BMS-D-12, BMS-D-12L, BMS-D-12M, BMT-D-12 2000 8900 1400 6230 1000 4450 BMS-12, BMS-12M, BMS-12S, BMT-12 1500 6670 1400 6230 1000 4450 1/2”-13 5/8”-11 3/4”-10 M12 x 1.75 * Combo Nut Washer (see page 49) Pull-Out Strength of Channel Nut Note: For mini channel nut information see page 191. Reference page 44 for general fitting and standard finish specifications. 51 16 ga. Channel Lbs. N Channel Nuts & Hardware 14 ga. Channel Lbs. N Metric Threads 12 ga. Channel Lbs. N Hardware DCN 3/8 DOUBLE CONVEYOR NUT •Recommended torque - 19 ft./Lbs. •Allowable slip loading - 700 Lbs.(3.11kN) •Safety Factor of 3 •Material: ASTM 1011SS Gr. 33 •Finish: Electrodeposited zinc ASTM B633 SC1 •Strut ordered separately 2” (50.8) 1/2” (12.7) 3” (76.2) 13/8” (34.9) B501 SERIES U-BOLT Channel Nuts & Hardware Part No. B501-1/2 B501-3/4 B501-1 B501-11/4 B501-11/2 B501-2 B501-21/2 B501-3 B501-31/2 B501-4 B501-5 B501-6 B501-8 D THREAD SIZE A •Designed for use with Rigid Conduit or Iron Pipe •Dimension “C” is dependent on the type of pipe or conduit supported and is a reference only A 15/16” (23.8) 11/8” 13/8” 123/32” 2” 27/16” 215/16” 39/16” 43/32” 419/32” 521/32” 63/4” 83/4” (28.6) (29.9) (43.6) (50.8) (61.9) (74.6) (90.5) (94.6) (116.7) (143.6) (171.4) (222.2) 13/4” 13/4” 17/8” 13/4” 13/4” 21/16” 21/16” 2” 2” 21/4” 21/4” 25/8” 25/8” C B B C (44.4) (44.4) (47.6) (44.4) (44.4) (52.4) (52.4) (50.8) (50.8) (57.1) (57.1) (66.7) (66.7) 11/2” 15/8” 15/8” 115/32” 17/16” 17/8” 113/16” 13/4” 123/32” 121/32” 2” 23/8” 23/8” HEX NUTS INCLUDED D (38.1) 5/16”-18 (41.3) 5/16”-18 (41.3) 5/16”-18 (37.3) 5/16”-18 (36.5) 5/16”-18 (47.6) 3/8”-16 (46.0) 3/8”-16 (44.4) 3/8”-16 (43.6) 3/8”-16 (50.0) 3/8”-16 (50.8) 1/2”-13 (60.3) 5/8”-11 (60.3) 5/8”-11 Design Load Lbs. kN Wt./C Lbs. kg 600 (2.67) 600 (2.67) 900 (4.00) 900 (4.00) 900 (4.00) 1200 (5.34) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1800 (8.00) 2400 (10.70) 2400 (10.70) 2400 (10.70) 12 13 14 15 16 27 32 36 38 42 92 176 191 B500 SERIES SQUARE U-BOLT •Includes: 1 pc. U-Bolt only 2 pcs. 3/8”-16 Hex Nuts •Additional sizes available •Standard finish: ZN, SS4 121/32” (42.1) 21/2” (63.5) A 3/8”-16 THREADS Part No. B500-3-3/8 B500-5 Channel Size A 33/8” 5” (85.7) (127.0) 15/8” x 15/8” 31/4” x 15/8” Wt./C Lbs. kg 25 33 (11.3) (14.9) Reference page 44 for general fitting and standard finish specifications. 52 (5.4) (5.9) (6.3) (6.8) (7.2) (12.2) (14.5) (16.3) (17.2) (19.0) (41.7) (79.8) (86.6) Hardware HHCS SFHMS HEX HEAD CAP SCREWS SLOTTED FLAT HEAD MACHINE SCREWS •Standard finish: Zinc-Plated, Stainless Steel •Standard finish: Zinc-Plated Wt./C Part No. 1/4” x 1/2” HHCS 1/4” x 3/4” HHCS 1/4” x 1” HHCS 1/4” x 11/4” HHCS 1/4” x 11/2” HHCS 5/16” x 1” HHCS 5/16” x 11/4” HHCS 5/16” x 11/2” HHCS 3/8” x 3/4” HHCS 3/8” x 1” HHCS 3/8” x 11/4” HHCS 3/8” x 11/2” HHCS 3/8” x 13/4” HHCS 3/8” x 2” HHCS 3/8” x 21/4” HHCS 3/8” x 21/2” HHCS 1/2” x 7/8” HHCS 1/2” x 1” HHCS 1/2” x 11/4” HHCS 1/2” x 11/2” HHCS 1/2” x 13/4” HHCS 1/2” x 2” HHCS 1/2” x 21/2” HHCS Lbs. 1.3 1.4 1.7 2.1 2.4 2.8 3.2 3.8 3.4 4.1 4.7 5.2 5.9 7.0 7.8 8.5 8.0 8.4 9.2 10.1 12.0 13.2 16.0 Wt./C kg (.59) (.63) (.77) (.95) (1.09) (1.27) (1.45) (1.72) (1.54) (1.86) (2.13) (2.36) (2.67) (3.17) (3.54) (3.85) (3.63) (3.81) (4.17) (4.58) (5.44) (5.99) (7.26) Part No. 1/4” x SFHMS x 5/8” SFHMS 1/4” x 3/4” SFHMS 5/16” x 1” SFHMS 3/8” x 11/2” SFHMS 3/8” x 2” SFHMS 3/8” x 21/4” SFHMS 3/8” x 21/2” SFHMS 1/2” x 1” SFHMS 1/2” x 11/4” SFHMS 1/2” x 11/2” SFHMS 1/2” x 21/2” SFHMS 1/4” •Standard finish: Zinc-Plated Wt./C x 1/2” SRHMS x 3/4” SRHMS 1/4” x 1” SRHMS 1/4” x 11/4” SRHMS 1/4” x 11/2” SRHMS 5/16” x 1” SRHMS 5/16” x 11/4” SRHMS 5/16” x 11/2” SRHMS 3/8” x 1” SRHMS 3/8” x 11/4” SRHMS 3/8” x 11/2” SRHMS 3/8” x 2” SRHMS 3/8” x 21/4” SRHMS 3/8” x 21/2” SRHMS .9 1.2 1.5 1.7 1.9 2.5 2.9 3.3 4.0 4.5 5.1 6.3 7.1 7.7 (.41) (.63) (1.27) (2.54) (3.04) (3.31) (3.58) (2.67) (3.17) (3.76) (6.26) 3/4” Lbs. kg 1.2 1.5 1.8 2.0 2.6 3.1 3.4 4.6 5.3 (.54) (.68) (.80) (.91) (1.18) (1.40) (1.54) (2.08) (2.40) CNPSS (.54) SQUARE HEAD CONE POINT SET SCREWS (.68) •Standard finish: ZN (.77) (.86) Wt./C (1.13) Part No. (1.31) (1.49) 3/8” (1.81) 3/8” 11/2” x CNPSS x 2” CNPSS 1/2” x 11/2” CNPSS 1/2” x 2” CNPSS 1/2” x 21/2” CNPSS 5/8” x 2” CNPSS 5/8” x 21/2” CNPSS (2.04) (2.31) (2.86) (3.22) (3.49) Reference page 44 for general fitting and standard finish specifications. 53 Lbs. kg 4.7 6.0 9.2 11.4 13.7 19.0 22.6 (2.13) (2.72) (4.17) (5.17) (6.21) (8.62) (10.25) Channel Nuts & Hardware SLOTTED ROUND HEAD MACHINE SCREWS 1/4” (.54) Wt./C Part No. x SHHMS x 1” SHHMS 1/4” x 11/4” SHHMS 1/4” x 11/2” SHHMS 5/16” x 1” SHHMS 5/16” x 11/4” SHHMS 5/16” x 11/2” SHHMS 3/8” x 11/4” SHHMS 3/8” x 11/2” SHHMS kg (.50) •Standard finish: Zinc-Plated, Stainless Steel 1/4” Lbs. 1.1 1.2 1.4 2.8 5.6 6.7 7.3 7.9 5.9 7.0 8.3 13.8 SLOTTED (COMBINATION RECESS) HEX HEAD MACHINE SCREWS SRHMS Part No. kg SHHMS 1/4” 1/4” 1/2” Lbs. Hardware B446A A SWIVEL HANGER (FEMALE ONLY) •Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) •Safety Factor of 3 •Standard finish: ZN Part No. B446A-3/8 B446A-1/2 A 3/8”-16 HN 1/2”-13 HN 9/32” (7.1) 3/8” (9.5) •Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) •Safety Factor of 3 •Standard finish: ZN Wt./C Lbs. kg 13 (5.9) 15 (6.8) Part No. B446B-3/8 B446B-1/2 B 3/8”-16 HHCS 1/2”-13 HHCS B R 9/32” (7.1) 3/8” (9.5) B446 SWIVEL HANGER (FEMALE-MALE) 23/4” (69.8) A (44.4) •Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) •Safety Factor of 3 R •Standard finish: ZN (44.4) R 13/4” SWIVEL HANGER (MALE ONLY) 13/4” B446C SWIVEL HANGER (FEMALE-FEMALE) B446B R A 23/4” (69.8) A 3/8”-16 HN 1/2”-13 HN Lbs. 26 31 kg (11.8) (14.0) (25.4) B Channel Nuts & Hardware •Standard finish: ZN •Wt./C 6 Lbs. (2.7 kg) Part No. B446-3/8 B446-1/2 A 3/8”-16 HN 1/2”-13 HN B 3/8”-16 HHCS 1/2”-13 HHCS Wt./C Lbs. kg 28 (12.7) 36 (16.3) MSQN B617 SHOULDER BOLT 1” A •Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) •Safety Factor of 3 •Standard finish: ZN Wt./C Part No. B446C-3/8 B446C-1/2 Wt./C Lbs. kg 16 (7.2) 20 (9.1) MACHINE SQUARE NUT 3/8”-16 THREAD SIZE •For use with B755 Beam Clamp •Standard finish: Zinc-Plated 2” Wt./C (50.8) HN HEX NUTS •Standard finish: Zinc-Plated, Stainless Steel Part No. Lbs. kg MSQN 1/4” MSQN 5/16” MSQN 3/8” .6 1.2 1.8 (.27) (.54) (.81) Wt./C Part No. Lbs. kg 1/4” .7 1.0 1.5 3.6 7.2 11.1 17.9 27.2 (.32) HN 5/16” HN 3/8” HN 1/2” HN 5/8” HN 3/4” HN 7/8” HN 1” HN SQN SQUARE NUTS (.45) •Standard finish: Zinc-Plated (.68) (1.63) Wt./C (3.26) (5.03) Part No. Lbs. kg (8.12) 1/2” 5.7 10.1 (2.58) SQN 5/8” SQN (12.34) Reference page 44 for general fitting and standard finish specifications. 54 (4.58) Hardware SLN SLIP-ON LOCK NUT •Material: ASTM A307 Gr. A. •Standard finish: Zinc-Plated Part No. SLN1/2 SLN5/8 Recommended Load Size 1/2”-13 11/8” 15/16” 5/8”-11 C B Length (28.6) 5/8” (15.9) (33.3) 5/8” (15.9) Wt./C Lbs. kg 6.0 7.0 (2.72) (3.17) FW FFW FLAT WASHERS FLAT FENDER WASHERS •Standard finish: Zinc-Plated, Stainless Steel •Standard finish: Zinc-Plated O.D. Part No. O.D. Outside Dia. in. mm 1/4” 47/64” (18.7) 7/8” (22.2) 1” (25.4) 13/8” (34.9) FW 5/16” FW 3/8” FW 1/2” FW 5/8” FW 3/4” FW 7/8” FW 1” FW 115/32” (37.3) 2” 21/4” 21/2” (50.8) (57.1) (63.5) Wt./C Lbs. kg .7 1.4 1.7 3.9 6.4 10.9 13.4 18.8 (.32) Wt./C 1/4” Part No. Lbs. kg 11/4” 2.2 3.1 2.0 3.0 5.4 (1.00) x FFW x 11/2” FFW 3/8” x 11/4” FFW 3/8” x 11/2” FFW 1/2” x 2” FFW (.63) 1/4” (.77) (1.77) (2.90) (4.94) (1.40) (.91) (1.36) (2.45) (6.08) (8.53) LW LOCK WASHERS •Standard finish: Zinc-Plated, Stainless Steel SC228 HANGER ROD STIFFENER SC228B Wt./C Part No. N228WO 1/4” LW 5/16” LW 3/8” LW 1/2” LW 5/8” LW 3/4” LW 7/8” LW 1” LW 3/8”-16 11/2” THREADS SC228BS (63.5) SC-UB Lbs. kg .3 .4 .6 1.3 2.4 3.8 5.9 8.8 (.13) (.18) (.27) (.59) (1.09) (1.72) (2.67) (3.99) 3/8”-16 HEX NUTS HANGER ROD STIFFENER •For 3/4” thru 7/8” ATR •Strut ordered separately •Includes: (1) B3188-11/2WO U-Bolt (2) 3/8”-16 Hex Nuts (1) 2-Hole Plate •Standard finish: ZN 2-HOLE PLATE 1/2” (6mm) x 15/8” (41mm) x 31/2” (89mm) B3188-11/2”WO U-BOLT STIFFENER CHANNEL ALL THREADED ROD (ATR) Reference page 44 for general fitting and standard finish specifications. 55 Channel Nuts & Hardware •For 3/8” thru 5/8” ATR •Strut ordered separately •Standard finish: ZN Hardware ATR ALL THREADED ROD •Available in 36” (91.4 cm), 72” (182.9 cm), 120” (304.8 cm), 144” (365.7 cm) lengths •Safety Factor of 5 on recommended load •Standard finish: Zinc-Plated, Stainless Steel Type 304 Part No. & Size Threads Per Inch ATR 1/4” ATR 5/16” ATR 3/8” ATR 1/2” ATR 5/8” ATR 3/4” ATR 7/8” ATR 1” 20 18 16 13 11 10 9 8 Recommended Load Lbs. kN 240 400 730 1350 2160 3230 4480 5900 Wt./C Ft. (3048.0 cm) Lbs. kg 12 19 29 53 89 123 170 225 (1.07) (1.78) (3.24) (6.00) (9.60) (14.37) (19.93) (26.24) B655 ROD COUPLING B656 REDUCER ROD COUPLING •Load rating for each coupler meets All Threaded Rod value •Standard finish: Zinc-Plated, Stainless Steel Type 304 (5.44) (8.62) (13.15) (24.04) (40.37) (55.79) (77.11) (102.06) Part No. B655-1/4 B655-5/16 B655-3/8 B655-1/2 B655-5/8 B655-3/4 B655-7/8 B655-1 Size 1/4”-20 5/16”-18 3/8”-16 1/2”-13 5/8”-11 3/4”-10 7/8”-9 1”-8 Channel Nuts & Hardware Part No. B656-3/8 x 1/4 B656-1/2 x 3/8 B656-5/8 x 1/2 B656-3/4 x 5/8 B656-7/8 x 3/4 Recommended Load Lbs. kN 240 380 730 1350 1810 2710 3770 4960 Size 3/8”-16 & 1/4”-20 1/2”-13 & 3/8”-16 5/8”-11 & 1/2”-13 3/4”-10 & 5/8”-11 7/8”-9 & 3/4”-10 Length (1.07) 7/8” (22.2) (1.69) 7/8” (22.2) (3.24) 11/8” 13/4” 21/8” 21/4” 21/2” 23/4” (28.6) (6.00) (8.05) (12.05) (16.77) (22.06) Recommended Load Lbs. kN 240 (1.07) 610 (2.71) 1130 (5.02) 1810 (8.05) 2710 (12.05) BHR SERIES HOT RODS FOR TRAPEZE HANGERS •12” length of threaded rod completely assembled with rod coupling, locking hex nuts, square washer, and channel nut. •Standard finish: Zinc-Plated Part No. BHR1225ZN BHR1238ZN BHR1250ZN BHR1262ZN Rod Size 1/4”-20 3/8”-16 1/2”-13 5/8”-11 Recommended Load Lbs. kN Wt./C Lbs. kg 240 730 1350 1500 41 63 98 148 (1.07) (3.24) (6.00) (6.67) (18.6) (28.6) (44.4) (67.1) Note: Based on use with 12 ga. channel. (BHR1225, BHR1238, and BHR1250 use combo nut washers instead of square washers and channel nuts) Reference page 44 for general fitting and standard finish specifications. 56 Wt./C Lbs. kg (44.4) (54.0) (57.1) (63.5) (69.8) 1.9 1.8 3.6 11.3 17.6 28.1 57.2 73.7 Length 1” 11/4” 11/4” 11/2” 13/4” (.86) (.81) (1.63) (5.12) (7.98) (12.74) (25.94) (33.43) Wt./C Lbs. kg 3.7 (1.68) 6.6 (2.99) (31.7) 11.6 (5.26) (38.1) 20.6 (9.34) (44.4) 39.4 (17.87) (25.4) (31.7) KwikWire™ Hardware KWIKWIRE™ HANGING SYSTEM KWIKPAK™ WIRE ROPE WIRE ROPE & CLAMPS IN HANDY CARRYING CARTON •Uncoated Galvanized Wire • 1 Spool per box • Dispenser Box - Easy Jobsite Handling. • 1 Kit per box 7x7 Part No. Part No. Kit Includes BKC100 (100 pcs.) Wire Rope (500 ft.) BKC100 (100 pcs.) 3/32”Ø Wire Rope (500 ft.) BKC150 (100 pcs.) 3/32”Ø Wire Rope (500 ft.) BKC150 (100 pcs.) 1/8”Ø Wire Rope (500 ft.) BKC200 (50 pcs.) 1/8”Ø Wire Rope (500 ft.) BKC200 (50 pcs.) 3/16”Ø Wire Rope (250 ft.) BKP10063 1/16”Ø BKP10094 BKP15094 BKP15125 BKP20125 BKP20188 BKW063 (1) BKW094 (1) BKW125 (1) BKW188 (2) Wt./Kit Lbs. kg 9.1 (4.1) 18.1 (8.2) -- (--) -- (--) 31.0 (14.1) 33.0 (15.0) 7 x 19 Diameter Working Load Lbs. kg 1/16” 3/32” 1/8” 3/16” 96 184 340 840 (43.5) (83.4) (154.2) (381.0) (1) Wire rope construction Type 7 x 7 Spool Qty. Ft. M Wt./Spool Lbs. kg 500 (152.4) 5.0 500 (152.4) 14.0 500 (152.4) 16.0 250 (76.2) 18.0 (2.3) (6.3) (7.2) (8.2) (2) Wire rope construction Type 7 x 19 AIR DUCT CORNER POTECTORS BKCP • Material: Plastic • 100 per box • Weight per 100 pcs. 1.0 Lbs. (0.45 kg) WIRE ROPE CUTTER CLAMPS BKCC • For use with Wire Rope Part No. BKC100 BKC150 BKC200 For Use With Wire Qty. Wt./Box Rope Diameters Per Box Lbs. kg 1/16” & 3/32” & 1/8” 1/8” & 3/16” 3/32” 100 100 50 4.1 -15.0 (1.8) (--) (6.8) KwikWire™ System Recommendations: KwikWire™ Clamp Working Loads** Clamp Part No. BKL100 BKL100 BKL150 BKL150 BKL200 BKL200 Wire Rope Dia. 1/16” 3/32” 3/32” 1/8” 1/8” 3/16” Lbs. Safety Factor 5 0-75 25-150 25-150 25-250 25-250 50-640 • Do not exceed the safe working load of the products shown in their charts • KwikWire™ Clamp load ratings are guaranteed only when used in combination with B-Line/Cooper supplied wire rope • Do not use for overhead lifting or hoisting • Do not use if cable or components are visibly distorted or worn, remove damaged cable end prior to inserting in KwikWire™ Clamp • Do not paint cable near working area of KwikWire Clamp connector • Do not apply lubricant • Keep product clean and free of dirt • Do not use on coated wire rope • Do not use in chlorinated or caustic atmospheres • For use in dry locations • Cooper’s BKCC tool is recommended for cutting wire rope to prevent fraying **Working loads shown are for hanging vertically. For suspending at 15°, 30°, 45° or 60° angles from vertical use the following percentage of the working loads from the chart: 15° = 96%, 30° = 86%, 45° = 70%, 60° = 50% For additional information on KwikWire™ products see the KwikWire brochure on the website at www.cooperbline.com Reference page 44 for general fitting and standard finish specifications. 57 Channel Nuts & Hardware • Never use cutter on energized circuits, wire, or cable. • 1 per box • Weight per each 1.0 Lbs. (0.45 kg) Fittings This section offers a full selection of fittings and accessories to complete B-Line’s metal framing system. Fittings are made from hot rolled, pickled and oiled plate or strip steel in accordance with ASTM A1018 33,000 PSI min. yield, unless noted. Dimensions The following dimensions apply to all fittings except as noted: Hole Spacing – 17/8” (47.6 mm) on center Hole Spacing – 13/16” (20.6 mm) from end Hole Size – 9/16” (14.3 mm) diameter Thickness – 1/4” (6.3 mm) Width – 15/8” (41.3 mm) Materials & Finishes (Unless otherwise noted) Finish Code PLN Finish Plain ZN GRN HDG SS4 SS6 AL Electro-Plated Zinc Dura-Green Hot-Dipped Galvanized Stainless Steel Type 304 Stainless Steel Type 316 Aluminum Specification ASTM A1018 33,000 PSI min. yield ASTM B633 SC3 Type III ASTM A123 ASTM A240 ASTM A240 ASTM B209 Note: A minimum order may apply on special material and finishes. Load Data The load data published includes safety factor of 2.5 when used with 12 ga. (2.6) channel (safety factor = ratio of ultimate load to the design load). Use 1/2” by 7/8” hex head cap screws and 1/2” (N225 or TN225) channel nuts for the rated results. Recommended Bolt Torque Bolt Size 1/4”-20 5/16”-18 3/8”-16 1/2”-13 Foot/Lbs. 6 11 19 50 Nm 8 15 26 68 Strut Fittings See chart on page 98 for setscrew torque. Hardware Nuts and bolts are not included with the fittings and must be ordered separately, unless noted. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 58 Flat Plate Fittings B200-B202-2 SQUARE WASHER •Standard finishes: ZN, GRN, HDG, SS4, SS6, AL 15/8” (41.3) HOLE SIZE A B200D-B202-2D Part No. B200 B201 B202 B202-1 B202-2 B129 A (A) Bolt Size 3/8” 7/16” (9.5) 5/16” (7.9) (11.1) 3/8” (9.5) 9/16” (14.2) 11/16” (17.4) 1/2” (12.7) 5/8” (15.9) 13/16” (20.6) 3/4” (19.0) Wt./C Lbs. kg 18 18 17 16 15 TWO HOLE SPLICE PLATE •Standard finishes: ZN, GRN •Wt./C 37 Lbs. (16.8 kg) (8.1) (8.1) (7.7) (7.2) 31/2” (6.8) (88.9) NO TWIST SQUARE WASHER •Standard finishes: ZN, GRN, HDG, SS4, SS6, AL 15/8” (41.3) HOLE SIZE A Part No. B200D B201D B202D B202-1D B202-2D A (A) Bolt Size 3/8” (9.5) 5/16” (7.9) 7/16” (11.1) 3/8” (9.5) 9/16” (14.2) 11/16” (17.4) 1/2” (12.7) 5/8” (15.9) 13/16” (20.6) 3/4” (19.0) Wt./C Lbs. kg 18 18 17 16 15 (8.1) (8.1) (7.7) (7.2) (6.8) B340 B528 B141 •Standard finishes: ZN, GRN •Wt./C 34 Lbs. (15.4 kg) •Standard finishes: ZN, GRN •Wt./C 50 Lbs. (22.7 kg) •Standard finishes: ZN, GRN •Wt./C 55 Lbs. (24.9 kg) TWO HOLE SPLICE PLATE TWO HOLE SPLICE PLATE THREE HOLE SPLICE PLATE 53/8” (136.5) 15/16” 15/8” (41.3) 21/2” (63.5) (33.3) 31/4” (82.5) 45/8” (117.5) B557 B341 B342 •Standard finishes: ZN, GRN •Wt./C 50 Lbs. (22.7 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 76 Lbs. (34.5 kg) •Standard finishes: ZN, GRN •Wt./C 96 Lbs. (43.5 kg) 71/4” 91/8” (231.8) THREE HOLE SPLICE PLATE FOUR HOLE SPLICE PLATE FIVE HOLE SPLICE PLATE 47/8” (123.8) 15/8” 15/8” (41.3) (41.3) Reference page 58 for general fitting and standard finish specifications. 59 Strut Fittings (184.1) Flat Plate Fittings B138 B139 B504 •Standard finishes: ZN, GRN •Wt./C 48 Lbs. (21.8 kg) •Standard finishes: ZN, GRN •Wt./C 69 Lbs. (31.3 kg) •Standard finishes: ZN, GRN •Wt./C 73 Lbs. (33.1 kg) TWO HOLE SWIVEL PLATE THREE HOLE SWIVEL PLATE 45/8” (117.5) FOUR HOLE SPLICE PLATE 61/2” (165.1) 3” 17/8” 15/8” 31/2” (76.2) (41.3) (88.9) 3” 31/4” (76.2) (82.5) (47.6) B140 B143 B133 •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 56 Lbs. (25.4 kg) •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 75 Lbs. (34.0 kg) •Standard finishes: ZN, GRN, HDG, SS4, AL •Wt./C 75 Lbs. (34.0 kg) THREE HOLE CORNER PLATE FOUR HOLE CORNER PLATE FOUR HOLE TEE PLATE 31/2” (88.9) 31/2” (88.9) 31/2” (88.9) 53/8” (136.5) 31/2” (88.9) 53/8” (136.5) B132 FIVE HOLE CROSS PLATE •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) 53/8” (136.5) B135 B142 •Standard finishes: ZN, GRN •Wt./C 70 Lbs. (31.7 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 102 Lbs. (46.2 kg) THREE HOLE CORNER GUSSET PLATE FOUR HOLE CORNER GUSSET PLATE 31/2” 31/2” Strut Fittings (88.9) (88.9) 31/2 (88.9) 53/8” (136.5) 53/8” (136.5) Reference page 58 for general fitting and standard finish specifications. 60 Flat Plate Fittings B137 B556 B337 •Standard finishes: ZN, GRN •Wt./C 273 Lbs. (123.8 kg) •Standard finishes: ZN, GRN •Wt./C 145 Lbs. (65.8 kg) •Standard finishes: ZN, GRN •Wt./C 70 Lbs. (31.7 kg) FOUR HOLE CORNER GUSSET PLATE FIVE HOLE CORNER GUSSET PLATE 25/16” 75/8” (58.7) (193.7) 513/16” 31/2” 53/8” (147.6) 1” THREE HOLE TEE GUSSET PLATE (25.4) (88.9) (136.5) 75/8” 53/8” (136.5) (193.7) 31/2” 31/2” (88.9) (88.9) 1” (25.4) B432 B136 B532 •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN •Wt./C 143 Lbs. (64.8 kg) FOUR HOLE TEE GUSSET PLATE FOUR HOLE TEE GUSSET PLATE FIVE HOLE TEE GUSSET PLATE 31/2” 31/2” (88.9) (88.9) 53/8” (136.5) 53/8” (136.5) 53/8” (136.5) 53/8” (136.5) B339 B568 B334 •Standard finishes: ZN, GRN •Wt./C 149 Lbs. (67.6 kg) •Wt./C 166 Lbs. (75.3 kg) •Standard finishes: ZN, GRN •Wt./C 232 Lbs. (105.2 kg) SIX HOLE TEE GUSSET PLATE SIX HOLE CROSS GUSSET PLATE SEVEN HOLE CROSS •Standard finishes: ZN, GRN GUSSET PLATE 31/2” (88.9) 91/8” (231.8) 91/8” (231.8) 31/2” 53/8” (136.5) (88.9) Reference page 58 for general fitting and standard finish specifications. 61 Strut Fittings 91/8” (231.8) 90° Angle Fittings B420-378 B420-578 B420-778 •Standard finishes: ZN, GRN •Wt./C 60 Lbs. (27.2 kg) •Standard finishes: ZN, GRN •Wt./C 85 Lbs. (38.5 kg) •Standard finishes: ZN, GRN •Wt./C 107 Lbs. (48.5 kg) ONE HOLE CORNER ANGLE ONE HOLE CORNER ANGLE ONE HOLE CORNER ANGLE 17/8” (47.6) 17/8” 17/8” (47.6) (47.6) 77/8” (200.0) 57/8” (149.2) 37/8” (98.4) B420-978 B101 •Standard finishes: ZN, GRN •Wt./C 129 Lbs. (58.5 kg) •Standard finishes: ZN, GRN, HDG, SS4, AL •Standard finishes: ZN, GRN, HDG, SS4, AL •Wt./C 37 Lbs. (16.8 kg) •Wt./C 37 Lbs. (16.8 kg) ONE HOLE CORNER ANGLE TWO HOLE CORNER ANGLE B230 TWO HOLE CORNER ANGLE 17/8” 15/8” (47.6) (47.6) (41.3) 17/8” 97/8” (250.8) 21/16” (52.4) 25/16” (58.7) B231 B359 B360 •Standard finishes: ZN, GRN •Wt./C 48 Lbs. (21.8 kg) •Standard finishes: ZN, GRN •Wt./C 53 Lbs. (24.0 kg) TWO HOLE CORNER ANGLE TWO HOLE “NO-TWIST” CORNER ANGLE •Standard finishes: ZN, GRN, HDG •Wt./C 41 Lbs. (18.6 kg) TWO HOLE CORNER ANGLE Strut Fittings 3” 31/2” (76.2) (88.9) 21/4” (57.1) 21/4” 17/8” (57.1) (47.6) Reference page 58 for general fitting and standard finish specifications. 62 17/8” (47.6) 90° Angle Fittings B361 B102 B103 •Standard finishes: ZN, GRN •Wt./C 60 Lbs. (27.2 kg) •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 56 Lbs. (25.4 kg) •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 56 Lbs. (25.4 kg) TWO HOLE CORNER ANGLE THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE 15/8” 31/2” 4” (41.3) (88.9) (101.6) 41/8” (104.8) 17/8” 21/4” (47.6) (57.1) B232 B374 B529 •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 56 Lbs. (25.4 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 56 Lbs. (25.4 kg) •Standard finishes: ZN, GRN •Wt./C 78 Lbs. (35.4 kg) THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE 3” 21/16” (52.4) 15/16” (76.2) (33.3) 17/8” (47.6) 47/8” (123.8) 315/16” 33/4” (100.0) (95.2) 15/16” (33.3) 21/2” (63.5) B104 B115 •Standard finishes: ZN, GRN, HDG, SS4, SS6, AL •Wt./C 78 Lbs. (35.4 kg) •Standard finishes: ZN, GRN, HDG, SS4, AL •Standard finishes: ZN, GRN •Wt./C 73 Lbs. (33.1 kg) •Wt./C 76 Lbs. (34.5 kg) FOUR HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE B558 FOUR HOLE CORNER ANGLE 33/4” 15/8” (95.2) (41.3) 31/2” (88.9) Strut Fittings 21/4” (57.1) 41/8” (104.8) 315/16” 15/8” (100.0) (41.3) Reference page 58 for general fitting and standard finish specifications. 63 31/4” (82.5) 90° Angle Fittings B235R B235L B236R •15/8” (41.3) from center to center of the holes that are shown with bolt heads •Standard finishes: ZN, GRN •Wt./C 53 Lbs. (24.0 kg) •15/8” (41.3) from center to center of the holes that are shown with bolt heads •Standard finishes: ZN, GRN •Wt./C 53 Lbs. (24.0 kg) •Standard finishes: ZN, GRN •Wt./C 65 Lbs. (29.5 kg) THREE HOLE (RIGHT HAND) OFFSET BENT ANGLE 17/8” 31/4” 31/4” 17/8” (47.6) (82.5) (82.5) (47.6) 17/8” 21/16” (52.4) (52.4) (52.4) •Standard finishes: ZN, GRN •Wt./C 65 Lbs. (29.5 kg) B237 B357 •Standard finishes: ZN, GRN •Wt./C 71 Lbs. (32.2 kg) •Standard finishes: ZN, GRN •Wt./C 77 Lbs. (34.9 kg) (88.9) THREE HOLE OFFSET BENT TEE FOUR HOLE OFFSET BENT TEE 47/8” (123.8) 17/8” 31/2” (47.6) 21/16” THREE HOLE (LEFT HAND) OFFSET BENT ANGLE 2” 21/16” (50.8) (47.6) (88.9) THREE HOLE (RIGHT HAND) OFFSET BENT ANGLE 21/16” B236L 31/2” THREE HOLE (LEFT HAND) OFFSET BENT ANGLE (52.4) 53/8” (136.5) 21/16” (52.4) B238R B238L •Standard finishes: ZN, GRN •Wt./C 76 Lbs. (34.5 kg) •Standard finishes: ZN, GRN •Wt./C 76 Lbs. (34.5 kg) Strut Fittings FOUR HOLE (RIGHT HAND) OFFSET BENT TEE FOUR HOLE (LEFT HAND) OFFSET BENT TEE 21/16” 21/16” (52.4) (52.4) B239 FIVE HOLE OFFSET BENT TEE •Standard finishes: ZN, GRN •Wt./C 96 Lbs. (43.5 kg) 21/16” (52.4) 33/4” (95.2) 31/2” 31/2” (88.9) (88.9) 33/4” 31/2” (95.2) (88.9) Reference page 58 for general fitting and standard finish specifications. 64 53/8” (136.5) 90° Angle Fittings B844 UNIVERSAL SHELF BRACKET •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 132 Lbs. (59.9 kg) B844W B888W •Standard finishes: ZN, GRN •Wt./C 134 Lbs. (60.8 kg) •Standard finishes: ZN, GRN •Wt./C 197 Lbs. (89.4 kg) UNIVERSAL SHELF BRACKETWELDED UNIVERSAL SHELF BRACKETWELDED 4” 4” (101.6) (101.6) 513/16” (147.6) Welded Corner 17/8” (47.6) 4” 4” (101.6) (101.6) 17/8” 17/8” (47.6) (47.6) 53/8” (136.5) B234R B234L B134R •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) FOUR HOLE (RIGHT HAND) CORNER GUSSET FOUR HOLE (LEFT HAND) CORNER GUSSET FOUR HOLE (RIGHT HAND) CORNER GUSSET 31/2” 31/2” (88.9) (88.9) 15/8” (41.3) 15/8” 315/16” (41.3) (100.0) 31/2” (88.9) 43/16” 43/16” (106.3) (106.3) 17/8” (47.6) B134L B125 B118 •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN •Wt./C 67 Lbs. (30.4 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 102 Lbs. (46.2 kg) FOUR HOLE (LEFT HAND) CORNER GUSSET THREE HOLE GUSSETTED SHELF ANGLE FOUR HOLE GUSSETTED SHELF ANGLE 315/16” 31/2” (88.9) 31/2” 15/8” (88.9) 31/2” 15/8” (88.9) (41.3) 25/16” (58.7) 17/8” (47.6) Reference page 58 for general fitting and standard finish specifications. 65 (41.3) 41/8” (104.8) Strut Fittings (100.0) 90° Angle Fittings B485 B533 B126 •Standard finishes: ZN, GRN •Wt./C 148 Lbs. (67.1 kg) •Standard finishes: ZN, GRN •Wt./C 141 Lbs. (63.9 kg) •Standard finishes: ZN, GRN •Wt./C 101 Lbs. (45.8 kg) FOUR HOLE GUSSETTED SHELF ANGLE FIVE HOLE GUSSETTED SHELF ANGLE 17/8” FOUR HOLE GUSSETTED THREE WAY SHELF ANGLE 15/8” (47.6) (41.3) 31/2” 41/8” (88.9) (104.8) 31/2” (88.9) 53/8” 53/8” (136.5) (136.5) 21/4” (57.1) 315/16” (100.0) B127 FIVE HOLE GUSSETTED THREE WAY SHELF ANGLE •Standard finishes: ZN, GRN •Wt./C 135 Lbs. (61.2 kg) B503R B503L •Standard finishes: ZN, GRN •Wt./C 229 Lbs. (103.9 kg) •Standard finishes: ZN, GRN •Wt./C 229 Lbs. (103.9 kg) SIX HOLE (RIGHT HAND) GUSSETTED CORNER CONNECTION SIX HOLE (LEFT HAND) GUSSETTED CORNER CONNECTION 31/2” 33/4” (88.9) (95.2) 31/2” (88.9) 33/4” 43/16” 43/16” (95.2) (106.3) (106.3) 43/16” (106.3) 53/8” (136.5) 53/8” (136.5) B663 15/8” 15/8” (41.3) (41.3) B371 SEVEN HOLE GUSSETTED CORNER CONNECTION B372 TWO HOLE ADJUSTABLE CORNER ANGLE •Standard finishes: ZN, GRN •Wt./C 41 Lbs. (18.6 kg) •Standard finishes: ZN, GRN •Wt./C 289 Lbs. (131.1 kg) TWO HOLE ADJUSTABLE CORNER ANGLE •Standard finishes: ZN, GRN •Wt./C 38 Lbs. (17.2 kg) 53/8” (136.5) Strut Fittings 25/8” 53/8” 43/16” (136.5) 25/8” (66.7) (66.7) (106.3) 9/16” (14.3) 9/16” (14.3) x 11/2” SLOT (38.1) 9/16” (14.3) 2” (50.8) 9/16” (14.3) x 11/2” SLOT (38.1) 15/8” (41.3) Reference page 58 for general fitting and standard finish specifications. 66 15/8” (41.3) 90° Angle Fittings B496 B496-1 B371-2 •Standard finishes: ZN, GRN, HDG •Wt./C 58 Lbs. (26.3 kg) •Standard finishes: ZN, GRN •Wt./C 61 Lbs. (27.6 kg) TWO HOLE ADJUSTABLE CORNER ANGLE TWO HOLE ADJUSTABLE CORNER ANGLE •Standard finishes: ZN, GRN •Wt./C 85 Lbs. (38.5 kg) 23/8” 23/8” (60.3) (60.3) THREE HOLE ADJUSTABLE CORNER ANGLE 15/16” 47/8” 67/8” 9/16” (123.8) (174.6) 9/16” x 29/16” SLOT (14.3) 9/16” (65.1) x 29/16” SLOT (14.3) 17/8” 17/8” (47.6) (47.6) x 11/2” SLOT (14.3) (33.3) 25/8” (38.1) (66.7) (65.1) 37/8” (98.4) B104SH B461 B112 •Standard finishes: ZN, GRN •Wt./C 68 Lbs. (30.8 kg) •Standard finishes: ZN, GRN •Wt./C 87 Lbs. (39.4 kg) •Standard finishes: ZN, GRN •Wt./C 180 Lbs. (81.6 kg) TWO HOLE ADJUSTABLE CORNER ANGLE THREE HOLE ADJUSTABLE CORNER ANGLE 31/2” 31/2” (88.9) (88.9) FOUR HOLE ADJUSTABLE CORNER ANGLE 21/4” (57.1) 9/16” 1/2” 13/32” (12.7) (10.3) x 11/2” SLOT-(2) (14.3) 31/2” (88.9) (38.1) 33/4” 4” (95.2) (101.6) 9/16” x 29/16” SLOT (14.3) 41/8” (65.1) (104.8) 9/16” x 29/16” SLOT (14.3) (65.1) 65/8” (168.3) B113 B109S •Standard finishes: ZN, GRN •Wt./C 256 Lbs. (116.1 kg) •Standard finishes: ZN, GRN •Wt./C 33 Lbs. (14.9 kg) FOUR HOLE ADJUSTABLE CORNER ANGLE x 11/2” SLOT-(2) (14.3) (38.1) 33/4” TWO HOLE BUS DUCT ANGLE •Standard finishes: ZN, GRN •Wt./C 37 Lbs. (16.8 kg) 5/16”-18 TAPPED 17/8” (95.2) 1/2” (12.7) 17/8” (47.6) (47.6) 6” (152.4) 15/8” 85/8” (219.1) (41.3) 17/8” 2” (50.8) (47.6) Reference page 58 for general fitting and standard finish specifications. 67 Strut Fittings 9/16” B521 TWO HOLE TAPPED CORNER ANGLE Angular Fittings B147-B152 B243-B253 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN TWO HOLE OPEN ANGLE FOUR HOLE OPEN ANGLE 23/8” (60.3) 11/16” (27.0) Part No. A B147 B148 B149 B150 B151 B152 821/2° 75° 671/2° 60° 521/2° 371/2° 31/4” Wt./C Lbs. kg (82.5) A 11/16” (27.0) 63 (28.6) Part No. A B243 B244 B245 B246 B247 B248 B249 B250 B251 B252 B253 71/2° 15° 221/2° 30° 371/2° 45° 521/2° 60° 671/2° 75° 821/2° Wt./C Lbs. kg 311/16” (93.6) 77 B162-B165 B322-B332 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN TWO HOLE OPEN ANGLE A (27.0) 35/16” (84.1) A B162 B163 B164 B165 30° 221/2° 15° 71/2° Wt./C Lbs. kg 11/16” 21/16” (52.4) (27.0) 59 (26.7) B154 TWO HOLE OPEN ANGLE •Standard finishes: ZN, GRN, SS4 •Wt./C 58 Lbs. (26.3 kg) (34.9) (88.9) TWO HOLE OPEN SHORT ANGLE 11/16” Part No. Part No. A B322 B323 B324 B325 B326 B327 B328 B329 B330 B331 B332 71/2° 15° 221/2° 30° 371/2° 45° 521/2° 60° 671/2° 75° 821/2° B522 Wt./C Lbs. kg A 13/4” 15/8” (44.4) (41.3) 35 (15.9) B488 THREE HOLE 95° OPEN ANGLE FITTING TWO HOLE LEG CONNECTION •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN •Wt./C 54 Lbs. (24.5 kg) Strut Fittings 17/8” (47.6) 3” (76.2) 5° 5° 5° 11/16” (27.0) 25/16” 45° (58.7) 11/16” A 31/2” 35/8” (92.1) 31/4” (27.0) (82.5) Reference page 58 for general fitting and standard finish specifications. 68 Angular Fittings B156 - B161 B155 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 63 Lbs. (28.6 kg) TWO HOLE CLOSED ANGLE TWO HOLE CLOSED ANGLE 13/16” Part No. A B156 B157 B158 B159 B160 B161 821/2° 75° 671/2° 60° 521/2° 371/2° Wt./C Lbs. kg 13/16” (20.6) (88.9) (80.9) A 13 45° /16” (20.6) 56 31/2” (20.6) 33/16” (25.4) 13/16” 21/2” (20.6) 21/2” (63.5) (63.5) B363 - B369 B335 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN •Wt./C 110 Lbs. (49.9 kg) FOUR HOLE CLOSED ANGLE FOUR HOLE ADJUSTABLE HINGE 5” (127.0) Part No. A B363 B364 B365 B366 B367 B368 B369 821/2° 75° 671/2° 60° 521/2° 45° 371/2° Wt./C Lbs. kg 411/16” 43/8” (119.1) (111.1) 95 (43.1) A 411/16” (119.1) B335-1 B335-2 SERIES •Standard finishes: ZN, GRN •Wt./C 78 Lbs. (35.4 kg) •OSHPD approved for Seismic Zone 4 •Standard finishes: ZN, GRN TWO HOLE ADJUSTABLE HINGE THREE HOLE ADJUSTABLE HINGE H HOLE SIZE THIS HOLE ONLY 411/16” (119.1) (71.4) (71.4) Part No. & Size B335-2-3/8 B335-2-1/2 B335-2-5/8 B335-2-3/4 213/16” (71.4) Hole Size H 7/16” (11.1) 9/16” (14.3) 11/16” (17.4) 13/16” (20.6) Reference page 58 for general fitting and standard finish specifications. 69 Wt./C Lbs. kg 96 (43.2) 94 (42.3) 92 (41.4) 90 (40.5) Strut Fittings 213/16” 213/16” Angular Fittings B634 B635 •Standard finishes: ZN, GRN •Wt./C 306 Lbs. (138.8 kg) •Standard finishes: ZN, GRN •Wt./C 518 Lbs. (234.9 kg) SINGLE CHANNEL ADJUSTABLE BRACE DOUBLE CHANNEL ADJUSTABLE BRACE 13/16” 13/16” (20.6) (20.6) 15/8” 15/8” (41.3) (41.3) 30° MIN. 17/8” 17/8” (47.6) (47.6) 33/4” 33/4” (95.2) (95.2) 53/8” 53/8” (136.5) (136.5) B650 SERIES B129 SEISMIC RETROFIT BRACKET •OSHPD approved for Seismic Zone 4. •Available for 3/8”, 1/2”, 5/8”, and 3/4” threaded rods. •Allows installer to easily brace existing trapeze supports. •Includes: Bracket, B129 plate, & key. Hardware sold separately. •Standard finish: ZN, GRN ATR Bracket Key Part No. & Size For Rod Size B650-3/8 B650-1/2 B650-5/8 B650-3/4 3/8” 1/2” 5/8” 3/4” TL Lbs. kN Lbs. kN 1100 1500 1500 1500 1100 1500 1500 1500 (4.89) (4.89) (6.67) (6.67) (6.67) LL (6.67) (6.67) (6.67) Wt./C Lbs. kg 92 97 95 107 Longitudinal Load (LL) (41.4) (43.6) (42.7) Transverse Load (TL) (48.5) B633 ADJUSTABLE SEISMIC HINGE FITTING H Strut Fittings •B633-1/2 thru B633-7/8 - OSHPD approved for Seismic Zone 4. •Use 1/2” Bolt & Channel Nut on two hole side of Connector Fitting (Torque to 50 ft.-lbs.) •Allows for swivel in two planes. •Standard finish: ZN 33/4” (95.2) B 15/8” (41.3) Part No. & Size A 31/2” B633-1/2 5 B633- /8 31/2” B633-3/4 31/2” B633-7/8 39/16” B633-1 39/16” B633-11/8 39/16” B633-11/4 37/8” B (82.5) (82.5) (82.5) (90.5) (90.5) (90.5) (98.4) 15/8” 15/8” 15/8” 2” 2” 2” 1 2 /4” Hole Size H (14.3) (41.3) 9/16” 11/16” (41.3) 13/16” (20.6) (50.8) 15/16” (23.8) (50.8) 11/16” 13/16” 15/16” (27.0) (41.3) (50.8) (57.1) (17.4) (30.2) (33.3) Wt./C Lbs. kg 92 97 95 107 120 104 114 (41.4) (43.6) (42.7) (48.5) (54.0) (47.2) (51.7) Reference page 58 for general fitting and standard finish specifications. 70 A Braces B261 15/8” TWO HOLE 45° KNEE BRACE •Standard finishes: ZN, GRN •Design load determined by testing using a B335 hinged corner connection. •Load ratings are for brace members only. Do not exceed allowable beam or column loads for strut channels. •Safety Factor of 3 Part No. A 8” B261-8 B261-12 12” B261-16 165/8” B261-18 18” B261-24 24” B261-36 36” (A) B (B) (203.2) 73/8” (187.3) (304.8) 101/8” 133/8” 147/16” 1811/16” 273/16” (257.2) (422.3) (457.2) (609.6) (914.4) Design Load Lbs. kN Wt./C Lbs. kg 1500 1020 530 450 250 110 119 165 218 234 303 441 (339.7) (366.7) (474.7) (690.6) (6.67) (4.54) (2.36) (2.00) (1.11) (.49) (41.3) Design Load B A (54.0) (74.8) (98.9) 45° 15/8” (41.3) (106.1) (137.4) B (200.0) B631 TWO HOLE 45° TUBING KNEE BRACE •1” (25.4) Square steel tubing •Material: ASTM A513 •Standard finishes: ZN, GRN •Design load determined by testing using a B335 hinged corner connection. •Load ratings are for brace members only. Do not exceed allowable beam or column loads for strut channels. •Safety Factor of 3 Part No. B631-18 B631-24 B631-30 B631-36 B631-42 B631-48 B631-54 B631-60 B631-72 B631-84 B631-96 A 18” 24” 30” 36” 42” 48” 54” 60” 72” 84” 96” (A) (457.2) (609.6) (762.0) (914.4) (1066.8) (1219.2) (1371.6) (1524.0) (1828.8) (2133.6) (2438.4) Design Load Lbs. kN Lbs. 1500 1500 1500 1500 1230 940 740 600 420 310 240 145 186 225 266 307 348 389 430 508 589 669 (6.67) (6.67) (6.67) (6.67) (5.47) (4.18) (3.29) (2.67) (1.87) (1.38) (1.07) Design Load A Wt./C kg (65.8) (84.4) (102.0) (120.6) (139.2) (157.8) (176.4) (195.0) (230.4) 13/4” (267.2) (44.4) (303.5) B632 TWO HOLE STRAIGHT TUBING BRACE •1” (25.4) Square steel tubing •Material: ASTM A513 •Standard finishes: ZN, GRN Part No. 18” 24” 30” 36” 42” 48” 54” 60” 72” 84” 96” (A) (457.2) (609.6) (762.0) (914.4) (1066.8) (1219.2) (1371.6) (1524.0) (1828.8) (2133.6) (2438.4) Wt./C Lbs. kg 133 174 215 256 295 335 380 420 500 585 670 (60.3) 13/4” (78.9) (44.4) (97.5) (116.1) (133.8) A (151.9) (172.3) (190.5) (226.8) (265.3) (303.9) Reference page 58 for general fitting and standard finish specifications. 71 Strut Fittings B632-18 B632-24 B632-30 B632-36 B632-42 B632-48 B632-54 B632-60 B632-72 B632-84 B632-96 A Clevis Fittings B169 B168 B167 •Standard finishes: ZN, GRN •Wt./C 84 Lbs. (38.1 kg) •Standard finishes: ZN, GRN •Wt./C 126 Lbs. (57.1 kg) •Standard finishes: ZN, GRN •Wt./C 178 Lbs. (80.7 kg) TWO HOLE SPLICE CLEVIS FOR B52 THREE HOLE SPLICE CLEVIS FOR B52 31/2” 1/4” (6.3) FOUR HOLE SPLICE CLEVIS FOR B52 71/4” (184.1) 53/8” (136.5) (88.9) 1/4” (6.3) 1/4” (6.3) B170 B171 B172 •Standard finishes: ZN, GRN •Wt./C 123 Lbs. (55.8 kg) •Standard finishes: ZN, GRN •Wt./C 195 Lbs. (88.4 kg) •Standard finishes: ZN, GRN •Wt./C 266 Lbs. (120.6 kg) TWO HOLE SPLICE CLEVIS FOR B22 OR B52A THREE HOLE SPLICE CLEVIS FOR B22 OR B52A 31/2” 1/4” FOUR HOLE SPLICE CLEVIS FOR B22 OR B52A 53/8” (136.5) (88.9) (6.3) 71/4” (184.1) 1/4” (6.3) 1/4” (6.3) B172-12 B172-22A •Standard finishes: ZN, GRN •Wt./C 326 Lbs. (147.8 kg) •Standard finishes: ZN, GRN •Wt./C 406 Lbs. (184.1 kg) FOUR HOLE SPLICE CLEVIS FOR B12 FOUR HOLE SPLICE CLEVIS FOR B11 OR B22A B450 U-WASHER •Material: ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN H HOLE SIZE 15/32” (11.9) Strut Fittings 15/8” 11 Gauge (3.1) Part No. & Size 71/4” (184.1) 1/4” (6.3) 71/4” (184.1) 1/4” (6.3) B450-1/4 B450-3/8 B450-1/2 B450-5/8 B450-3/4 Reference page 58 for general fitting and standard finish specifications. 72 (41.3) Hole Size H 5/16” (7.9) 7/16” (11.1) 9/16” (14.3) 11/16” (17.4) 13/16” (20.6) Wt./C Lbs. kg 14 14 13 13 13 (6.3) (6.3) (5.8) (5.8) (5.8) ‘U’ Fittings B527 THREE HOLE OFFSET PLATE CONNECTION •Standard finishes: ZN, GRN •Wt./C 54 Lbs. (24.5 kg) B116-52 B116-42 •Standard finishes: ZN, GRN •Wt./C 70 Lbs. (31.7 kg) •Standard finishes: ZN, GRN •Wt./C 75 Lbs. (34.0 kg) THREE HOLE U-SUPPORT 1/2” (12.7) THREE HOLE U-SUPPORT 13/16” 1” (20.6) (25.4) 57/16” 57/16” (138.1) (138.1) 55/16” (134.9) B116-32 B116-32A B116-12 •Standard finishes: ZN, GRN •Wt./C 84 Lbs. (38.1 kg) •Standard finishes: ZN, GRN •Wt./C 116 Lbs. (52.6 kg) •Standard finishes: ZN, GRN •Wt./C 108 Lbs. (49.0 kg) THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT 13/8” THREE HOLE U-SUPPORT 23/4” 27/16” (69.8) (61.9) (34.9) 57/16” 57/16” 57/16” (138.1) (138.1) (138.1) B107 B107-22A B588 •Standard finishes: ZN, GRN, HDG •Wt./C 85 Lbs. (38.5 kg) •Standard finishes: ZN, GRN •Wt./C 126 Lbs. (57.1 kg) •Standard finishes: ZN, GRN •Wt./C 157 Lbs. (71.2 kg) FIVE HOLE U-SUPPORT THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT 15/8” 47/8” (123.8) Strut Fittings 31/4” (82.5) (41.3) 57/16” (138.1) 57/16” (138.1) 57/16” (138.1) Reference page 58 for general fitting and standard finish specifications. 73 ‘U’ Fittings B412 B107S B596 •Standard finishes: ZN, GRN •Wt./C 89 Lbs. (40.3 kg) •Material: 7 Gauge (4.5) ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN, GRN •Wt./C 51 Lbs. (23.1 kg) •Standard finishes: ZN, GRN •Wt./C 53 Lbs. (24.0 kg) THREE HOLE OFFSET U-SUPPORT FIVE HOLE U-SUPPORT 57/16” (138.1) THREE HOLE SWIVEL CLEVIS 33/4” 13/16” (95.2) (20.6) 3 1” 1 /8” 17/8” (25.4) (34.9) (47.6) 21/4” (57.1) 13/4” 7/16” (11.1) DIA. 4 HOLES 9/16” (14.3) DIA. 15/8” 15/8” (41.3) (41.3) (44.4) B578 THREE HOLE LIGHT-WEIGHT U-SUPPORT •Material: 10 Gauge (3.4) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 18 Lbs. (8.1 kg) B594 B266 •Standard finishes: ZN, GRN •Wt./C 106 Lbs. (48.1 kg) •Standard finishes: ZN, GRN •Wt./C 105 Lbs. (47.6 kg) FIVE HOLE U-SUPPORT 17/8” SIX HOLE U-SUPPORT 35/16” 121/32” (84.1) (42.1) (47.6) 311/16” (93.6) 3/4” (19.0) 15/8” (41.3) 13/32” (10.3) 9/32” (7.1) DIA. 3 HOLES 15/8” (41.3) 71/32” (178.6) 111/16” (42.8) (84.1) (179.4) B425 B581 B519 •Standard finishes: ZN, GRN •Wt./C 167 Lbs. (75.7 kg) •Standard finishes: ZN, GRN •Wt./C 201 Lbs. (91.2 kg) •Standard finishes: ZN, GRN •Wt./C 266 Lbs. (102.5 kg) SIX HOLE U-SUPPORT 35/16” 71/16” EIGHT HOLE U-SUPPORT EIGHT HOLE U-SUPPORT 111/16” Strut Fittings (42.9) 31/2” 31/2” (88.9) (88.9) 15/8” 31/2” (41.3) (88.9) 31/2” (88.9) 15/8” (41.3) 57/16” (138.1) 71/16” (179.4) 513/32” (137.3) Reference page 58 for general fitting and standard finish specifications. 74 ‘U’ Fittings B333 B451 SLOTTED THREE HOLE U-SUPPORT FOR B22 A SLOTTED THREE HOLE U-SUPPORT WITH GUSSET FOR B22 C •Consists of B333-1, 2, or 3 with gusset plate welded on back. •Material: ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN 9/16” A x 11/2” SLOTS-(2) (14.3) (38.1) 9/16” x 11/2” SLOTS-(2) (14.3) (38.1) 15/8” B Part No. A (A) B (B) C (41.3) Wt./C Lbs. kg (C) B333-1 71/2” (190.5) 15/16” (33.3) 27/8” (73.0) 103 B333-2 81/2” (215.9) 115/16” (49.2) 33/8” (85.7) 115 B333-3 103/8” (263.5) 27/8” (73.0) 45/16” (109.5) 135 Part No. B451-1 B451-2 B451-3 (46.7) (52.1) (61.2) B408 A Wt./C Lbs. kg (A) 71/2” (190.5) 81/2” (215.9) 103/8” (263.5) 137 156 172 (62.1) (70.7) (78.0) B358 TWO HOLE BUS DUCT CLEVIS TWO HOLE CLEVIS 1/2” •Standard finishes: ZN, GRN (12.7) 13/16” •Standard finishes: ZN, GRN (20.6) 9/16” (14.3) DIA. 2 HOLES 17/8” (47.6) 17/8” (47.6) A Part No. B408-1 B408-2 B408-3 A (A) Wt./C Lbs. kg 213/32” (61.1) 58 325/32” (96.0) 76 43/4” (762.0) 88 (26.3) A 13/16” (20.6) (34.5) (39.9) Part No. A B358-4 B358-5 B358-6 B358-7 B358-8 4” 5” 6” 7” 8” B173 B595 •Standard finishes: ZN, GRN •Wt./C 71 Lbs. (32.2 kg) •Standard finishes: ZN, GRN •Wt./C 75 Lbs. (34.0 kg) FOUR HOLE CLEVIS (A) Wt./C Lbs. kg 89 93 (152.4) 106 (177.8) 118 (203.2) 132 (101.6) (40.3) (127.0) (42.2) (48.1) 13/16” (53.5) (20.6) (59.9) B405 THREE HOLE CLEVIS THREE HOLE SUSPENSION CLEVIS •Standard finishes: ZN, GRN •Wt./C 75 Lbs. (34.0 kg) 37/16” 17/8” 17/8” (47.6) 129/32” 35/16” (84.1) 121/32” (42.0) (48.4) 35/16” 121/32” (42.0) (84.1) 17/8” (47.6) Reference page 58 for general fitting and standard finish specifications. 75 Strut Fittings (87.3) (47.6) ‘U’ Fittings B398-1 B415 THREE HOLE CUP SUPPORT TWO HOLE BUS DUCT CONNECTION •Standard finishes: ZN, GRN •Wt./C 73 Lbs. (33.1 kg) •Standard finishes: ZN, GRN •Wt./C 56 Lbs. (25.4 kg) 17/8” (47.6) 111/16” (42.9) 23/32” (53.2) 11/16” (27.0) 111/16” 325/32” (42.9) (96.0) 15/8” (41.3) 1/2” (12.7) 11/16” (27.0) B400 B400-1 B400-2 •1/2”-13 stud protrudes 1” (25.4mm) •Standard finishes: ZN •Wt./C 85 Lbs. (38.5 kg) •1/2”-13 stud protrudes 1” (25.4mm) •Standard finishes: ZN •Wt./C 53 Lbs. (24.0 kg) •1/2”-13 stud protrudes 1” (25.4mm) •Standard finishes: ZN •Wt./C 40 Lbs. (18.1 kg) THREE STUD RING CONNECTION ONE STUD RING CONNECTION 111/16” 111/16” 23/16” ONE STUD RING CONNECTION 111/16” (42.9) (42.9) B400-3 B400-4 •1/2”-13 stud protrudes 1” (25.4mm) •Standard finishes: ZN •Wt./C 59 Lbs. (26.7 kg) •1/2”-13 stud protrudes 1” (25.4mm) •Standard finishes: ZN •Wt./C 59 Lbs. (26.7 kg) TWO STUD RING CONNECTION (47.6) (47.6) (42.9) (55.6) 17/8” 17/8” B536 TWO STUD RING CONNECTION TAPPED U-SUPPORT •Standard finishes: ZN •Wt./C 87 Lbs. (39.4 kg) Strut Fittings 15/8” (41.3) 111/16” (42.9) 111/16” (42.9) 111/16” (42.9) 111/16” (42.9) 59/16” (141.3) TAPPED 5/16”-18 (2) HOLES Reference page 58 for general fitting and standard finish specifications. 76 ‘Z’ Fittings B526 B106-52 B106-42 •Standard finishes: ZN, GRN •Wt./C 38 Lbs. (17.2 kg) •Standard finishes: ZN, GRN •Wt./C 40 Lbs. (18.1 kg) •Standard finishes: ZN, GRN •Wt./C 44 Lbs. (20.0 kg) TWO HOLE OFFSET Z-SUPPORT TWO HOLE Z-SUPPORT FOR B52 TWO HOLE Z-SUPPORT FOR B42 1/4” (6.3) 315/32” 13/16” 1” (20.6) (25.4) (88.1) 15/8” 31/2” 31/2” (88.9) (88.9) (41.3) B106-32 B106-12 B105 •Standard finishes: ZN, GRN •Wt./C 51 Lbs. (23.1 kg) •Standard finishes: ZN, GRN •Wt./C 63 Lbs. (28.6 kg) •Standard finishes: ZN, GRN, HDG •Wt./C 51 Lbs. (23.1 kg) TWO HOLE Z-SUPPORT FOR B32 TWO HOLE Z-SUPPORT FOR B12 THREE HOLE Z-SUPPORT FOR B22 15/8” (41.3) 13/8” 27/16” (34.9) (61.9) 31/2” 31/2” 31/2” (88.9) (88.9) (88.9) B110 B586 B108 •Standard finishes: ZN, GRN •Wt./C 70 Lbs. (31.7 kg) •Standard finishes: ZN, GRN •Wt./C 90 Lbs. (40.8 kg) •Standard finishes: ZN, GRN •Wt./C 55 Lbs. (24.9 kg) THREE HOLE Z-SUPPORT FOR B11 TWO HOLE Z-SUPPORT TWO HOLE OFFSET Z-SUPPORT 31/2” (88.9) 31/2” 31/2” (88.9) Strut Fittings (88.9) 21/8” 47/8” 15/8” (123.8) (54.0) (41.3) 31/2” (88.9) 15/8” (41.3) Reference page 58 for general fitting and standard finish specifications. 77 ‘Z’ Fittings B387 B407 TWO HOLE Z-BUS DUCT CONNECTION TWO HOLE Z-SUPPORT •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN 15/8” 31/2” (41.3) (88.9) 15/8” 31/2” (41.3) A (88.9) 1/2” (12.7) Part No. B387 B387-1 B387-2 A 43/4” (120.6) 325/32” (96.0) 213/32” (61.1) 89 (40.3) 78 (35.4) 62 (28.1) A B534 B535 •Standard finishes: ZN •Wt./C 51 Lbs. (23.1 kg) •Standard finishes: ZN •Wt./C 50 Lbs. (22.7 kg) TAPPED Z-SUPPORT 15/8” (41.3) (A) (101.6) (127.0) (152.4) (177.8) (203.2) (244.5) Wt./C Lbs. kg 77 95 98 105 120 138 (34.9) (43.1) (44.4) (47.6) (54.4) (62.6) B111 TAPPED Z-SUPPORT 15/8” 15/8” A 4” B407-4 B407-5 5” B407-6 6” B407-7 7” B407-8 8” B407-95/8” 95/8” Wt./C Lbs. kg (A) Part No. THREE HOLE SHEATH CORNER CONNECTION •Standard finishes: ZN, GRN •Wt./C 68 Lbs. (30.8 kg) 31/2” 15/8” (41.3) (88.9) (41.3) (41.3) 31/2” (88.9) 15/8” 15/8” 15/8” (41.3) (41.3) (41.3) 5/16”-18 TAPPED HOLES (2) 5/16”-18 TAPPED HOLE 15/8” (41.3) B538 B539 •Standard finishes: ZN •Wt./C 71 Lbs. (32.2 kg) •Standard finishes: ZN •Wt./C 68 Lbs. (30.8 kg) Strut Fittings TAPPED CORNER CONNECTION 15/8” (41.3) 17/8” (47.6) TAPPED CORNER CONNECTION 5/16”-18 TAPPED HOLES (4) 15/8” (41.3) 17/8” (47.6) 31/2” (88.9) 31/2” (88.9) 5/16”-18 TAPPED HOLES (2) Reference page 58 for general fitting and standard finish specifications. 78 ‘Z’ Fittings B410-52 B410-32 B410-22 •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 6.7 Lbs. (3.0 kg) •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 8.3 Lbs. (3.7 kg) •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 9 Lbs. (4.1 kg) CHANNEL HANGER BRACKET FOR B52 CHANNEL HANGER BRACKET FOR B32 13/16” 9/32” (7.1) DIA. HOLE CHANNEL HANGER BRACKET FOR B22 13/16” 13/16” (20.6) (20.6) (20.6) 9/32” (7.1) 9/32” (7.1) 13/16” 13/8” (20.6) DIA. HOLE DIA. HOLE 15/8” (34.9) (41.3) B410-12 B410-11 B580 •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 11.2 Lbs. (5.1 kg) •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 13.4 Lbs. (6.1 kg) •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) CHANNEL HANGER BRACKET FOR B12 9/32” (7.1) 13/16” DIA. HOLE (20.6) CHANNEL HANGER BRACKET FOR B11 FIVE HOLE GUSSETTED Z-SUPPORT 31/2” 13/16” (88.9) (20.6) 31/2” (88.9) 9/32” (7.1) DIA. HOLE 31/4” 27/16” (82.5) (61.9) 15/8” (41.3) B515 B428 •Standard finishes: ZN, GRN •Wt./C 93 Lbs. (42.2 kg) •Standard finishes: ZN, GRN •Wt./C 203 Lbs. (92.1 kg) ADJUSTABLE OFFSET GUSSETTED Z-SUPPORT 15/32” (11.9) (88.9) 37/8” (98.4) 17/8” 53/4” (146.0) (47.6) 9/16” (14.3) 53/4” (146.0) x 29/16” SLOTS Strut Fittings 31/2” EIGHT HOLE GUSSETTED CORNER CONNECTION (65.1) 17/8” (47.6) 31/2” (88.9) Reference page 58 for general fitting and standard finish specifications. 79 Wing Fittings B267R B267L B270R •Standard finishes: ZN, GRN •Wt./C 54 Lbs. (24.5 kg) •Standard finishes: ZN, GRN •Wt./C 54 Lbs. (24.5 kg) •Standard finishes: ZN, GRN •Wt./C 77 Lbs. (34.9 kg) THREE HOLE SINGLE CORNER CONNECTION (RIGHT HAND) THREE HOLE SINGLE CORNER CONNECTION (LEFT HAND) FOUR HOLE SINGLE CORNER CONNECTION (RIGHT HAND) 111/16” 21/16” 21/16” (52.4) (52.4) (42.8) 21/16” (52.4) 15/8” 15/8” (41.3) (41.3) 31/2” (88.9) 31/2” 313/16” (88.9) (96.8) B270L B268R B268L •Standard finishes: ZN, GRN •Wt./C 77 Lbs. (34.9 kg) •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) •Standard finishes: ZN, GRN •Wt./C 100 Lbs. (45.3 kg) FOUR HOLE SINGLE CORNER CONNECTION (LEFT HAND) FIVE HOLE SINGLE CORNER CONNECTION (RIGHT HAND) FIVE HOLE SINGLE CORNER CONNECTION (LEFT HAND) 111/16” (42.8) 21/16” 315/16” (52.4) 15/8” 315/16” (100.0) (100.0) (41.3) 313/16” 15/8” (41.3) 31/2” (96.8) 31/2” (88.9) (88.9) B269R B269L B119 •Standard finishes: ZN, GRN •Wt./C 120 Lbs. (54.4 kg) •Standard finishes: ZN, GRN •Wt./C 120 Lbs. (54.4 kg) •Standard finishes: ZN, GRN •Wt./C 71 Lbs. (32.2 kg) SIX HOLE SINGLE CORNER CONNECTION (RIGHT HAND) SIX HOLE SINGLE CORNER CONNECTION (LEFT HAND) 31/2” (88.9) (88.9) Strut Fittings 31/2” 315/16” 315/16” (100.0) (100.0) FOUR HOLE DOUBLE CORNER CONNECTION 21/16” 15/8” (52.4) (41.3) 53/8” (136.5) 53/8” (136.5) Reference page 58 for general fitting and standard finish specifications. 80 31/2” (88.9) Wing Fittings B120 B121 B271 •Standard finishes: ZN, GRN •Wt./C 110 Lbs. (49.9 kg) •Standard finishes: ZN, GRN •Wt./C 152 Lbs. (68.9 kg) •Standard finishes: ZN, GRN •Wt./C 95 Lbs. (43.1 kg) SIX HOLE DOUBLE CORNER CONNECTION EIGHT HOLE DOUBLE CORNER CONNECTION FIVE HOLE DOUBLE WING CONNECTION 57/16” (138.1) 31/2” 15/8” (88.9) 315/16” (41.3) (100.0) 315/16” 21/16” (100.0) (52.4) 15/8” (41.3) 31/2” 53/8” (88.9) (136.5) 111/16” (42.8) B272 B273 B122 •Standard finishes: ZN, GRN •Wt./C 156 Lbs. (70.7 kg) •Standard finishes: ZN, GRN •Wt./C 185 Lbs. (83.9 kg) •Standard finishes: ZN, GRN •Wt./C 110 Lbs. (49.9 kg) EIGHT HOLE DOUBLE WING CONNECTION TEN HOLE DOUBLE WING CONNECTION 57/16” 93/16” (138.1) (233.4) SIX HOLE TRIPLE WING CONNECTION 57/16” (138.1) 315/16” 15/8” 315/16” (100.0) 31/2” (41.3) 21/16” (100.0) (52.4) (88.9) 15/8” 111/16” 111/16” (42.8) (42.8) 111/16” (42.8) B123 B124 B276 •Standard finishes: ZN, GRN •Wt./C 234 Lbs. (106.1 kg) •Standard finishes: ZN, GRN •Wt./C 177 Lbs. (80.3 kg) •Standard finishes: ZN, GRN •Wt./C 196 Lbs. (88.9 kg) TWELVE HOLE TRIPLE WING CONNECTION NINE HOLE TRIPLE WING CONNECTION (41.3) FOURTEEN HOLE DOUBLE CORNER GUSSETTED CONNECTION 57/16” 93/16” (138.1) (233.4) 31/2” (88.9) 315/16” 315/16” (100.0) 15/8” (100.0) (41.3) 111/16” (42.8) 111/16” 4” (101.6) (42.8) Reference page 58 for general fitting and standard finish specifications. 81 Strut Fittings 4” (101.6) Wing Fittings B274R B274L •Standard finishes: ZN, GRN •Wt./C 176 Lbs. (79.8 kg) •Standard finishes: ZN, GRN •Wt./C 176 Lbs. (79.8 kg) EIGHT HOLE SINGLE CORNER GUSSETTED CONNECTION (RIGHT HAND) EIGHT HOLE SINGLE CORNER GUSSETTED CONNECTION (LEFT HAND) B495 TEN HOLE DOUBLE WING GUSSETTED CONNECTION •Standard finishes: ZN, GRN •Wt./C 240 Lbs. (108.8 kg) 93/16” 511/16” 521/32” (144.5) (233.4) (143.7) 315/16” (100.0) 37/8” 315/16” (98.4) (100.0) 31/2” 31/2” 31/2” (88.9) (88.9) (88.9) 111/16” 111/16” (42.8) (42.8) 111/16” (42.8) B277 B362 B571 •Standard finishes: ZN, GRN •Wt./C 285 Lbs. (129.3 kg) •Standard finishes: ZN, GRN •Wt./C 226 Lbs. (102.5 kg) •Standard finishes: ZN, GRN •Wt./C 201 Lbs. (91.2 kg) TWELVE HOLE TRIPLE WING GUSSETTED CONNECTION EIGHT HOLE DOUBLE CORNER GUSSETTED CONNECTION EIGHT HOLE WING CONNECTION 93/16” (233.4) 53/8” (136.5) 4” (101.6) 315/16” 315/16” (100.0) 31/2” (100.0) 31/2” (88.9) (88.9) 15/8” 111/16” (41.3) (42.8) 4” (101.6) B346L B346R •Standard finishes: ZN, GRN •Wt./C 242 Lbs. (109.8 kg) •Standard finishes: ZN, GRN •Wt./C 242 Lbs. (109.8 kg) EIGHT HOLE DOUBLE CORNER GUSSETTED CONNECTION (RIGHT HAND) Strut Fittings EIGHT HOLE DOUBLE CORNER GUSSETTED CONNECTION (LEFT HAND) 53/8” (136.5) 31/2” 31/2” (88.9) (88.9) Reference page 58 for general fitting and standard finish specifications. 82 53/8” (136.5) Post Bases B279 B279SQ B279FL •Standard finishes: ZN, GRN •Wt./C 314 Lbs. (142.4 kg) •Standard finishes: ZN, GRN •Wt./C 314 Lbs. (142.4 kg) •Standard finishes: ZN, GRN •Wt./C 230 Lbs. (104.3 kg) POST BASE FOR B22 POST BASE FOR B22 POST BASE FOR B22 3/4” (19.0) DIA. 2 HOLES 111/16” 3/4” (19.0) DIA .4 HOLES (42.8) 3/4” (19.0) DIA. 4 HOLES 111/16” (42.8) 6” 111/16” (42.8) 15/8” 15/8” (41.3) 15/8” (41.3) (152.4) 41/4” 6” 41/4” (107.9) (107.9) (152.4) 6” 61/4” 8” (203.2) (158.7) 31/8” 6” (152.4) (79.4) (152.4) 3” (41.3) (76.2) B280 B280SQ POST BASE FOR B22 B280FL POST BASE FOR B22 POST BASE FOR B22 •Standard finishes: ZN, GRN, HDG, SS4, AL •Standard finishes: ZN, GRN, HDG, SS4, AL •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 392 Lbs. (177.8 kg) •Wt./C 392 Lbs. (177.8 kg) •Wt./C 312 Lbs. (141.5 kg) 111/16” 3/4” (19.0) DIA. 4 HOLES 111/16” (42.8) 111/16” (42.8) (42.8) 3/4” (19.0) DIA. 2 HOLES 3/4” (19.0) DIA. 4 HOLES 31/2” 31/2” (88.9) 6” (88.9) 31/2” (152.4) 41/4” 6” 6” (152.4) 8” 41/4” (107.9) (152.4) (107.9) 3” 61/4” (88.9) (158.7) (203.2) 6” 31/8” (152.4) (79.4) (76.2) B281A B281ASQ B281AFL •Standard finishes: ZN, GRN •Wt./C 330 Lbs. (149.7 kg) •Standard finishes: ZN, GRN •Wt./C 330 Lbs. (149.7 kg) •Standard finishes: ZN, GRN •Wt./C 250 Lbs. (113.4 kg) POST BASE FOR B22A, B,C, ETC. POST BASE FOR B22A, B, C, ETC. 3/4” (19.0) DIA. 4 HOLES 35/16” 35/16” (41.3) (84.1) 3/4” (19.0) DIA. 4 HOLES 35/16” (84.1) 15/8” (41.3) 6” (152.4) 6” 41/4” (107.9) 41/4” (152.4) (107.9) 8” 6” 15/8” (41.3) (158.7) (203.2) (152.4) 6” (152.4) 61/4” 31/8” (79.4) 3” (76.2) Reference page 58 for general fitting and standard finish specifications. 83 Strut Fittings 3/4” (19.0) DIA. 2 HOLES (84.1) 15/8” POST BASE FOR B22A, B, C, ETC. Post Bases B281 B281SQ B281FL •Standard finishes: ZN, GRN, HDG •Wt./C 400 Lbs. (181.4 kg) •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 400 Lbs. (181.4 kg) •Standard finishes: ZN, GRN •Wt./C 320 Lbs. (145.1 kg) POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. 3/4” (19.0) 35/16” DIA. 4 HOLES (84.1) 35/16” 31/2” (84.1) 3/4” (19.0) 35/16” 3/4” (19.0) DIA. 4 HOLES (84.1) DIA. 2 HOLES 31/2” (88.9) (88.9) 31/2” 6” (152.4) 6” (152.4) 41/4” 41/4” (107.9) (107.9) 8” 6” (88.9) 61/4” (158.7) (203.2) (152.4) 6” (152.4) 31/8” (79.4) 3” (76.2) B281M B281MSQ •Standard finishes: ZN, GRN •Wt./C 470 Lbs. (213.2 kg) •Standard finishes: ZN, GRN •Wt./C 470 Lbs. (213.2 kg) POST BASE FOR B22-2PL B570 POST BASE FOR B22-2PL POST BASE FOR FOUR CHANNEL COMBINATIONS •Standard finishes: ZN, GRN •Wt./C 397 Lbs. (180.1 kg) 39/16” (90.5) 3/4” (19.0) 111/16” DIA. 4 HOLES (42.8) 3/4” (19.0) (41.3) (88.9) DIA. 4 HOLES 31/2” 315/32” (88.9) (87.9) 41/4” 6” 6” 6” (152.4) (152.4) 1/4” (6.3) (107.9) (107.9) 6” (152.4) •Standard finishes: ZN, GRN •Wt./C 550 Lbs. (249.5 kg) 31/2” (88.9) 3/4” (19.0) (76.2) DIA. 4 HOLES B585 B300 •Wt./C 288 Lbs. (130.6 kg) •Standard finishes: ZN, GRN •Wt./C 97 Lbs. (44.0 kg) •Material: Malleable Iron •Standard finishes: ZN, GRN •Wt./C 259 Lbs. (117.5 kg) 7/16” (11.1) DIA. 4 HOLES POST BASE FOR B22A (41.3) 4” 31/2” (101.6) (88.9) 3/4” (19.0) DIA. 4 HOLES 111/16” 5” (127.0) 31/2” 31/16” (77.8) (42.8) (88.9) 3/8” (9.5) COUNTERSUNK TO 3/4” (19.0) DIA. 9/16” (44.4) 5” (127.0) 6” 3/4” (19.0) 13/4” 6” (152.4) POST BASE 15/8” 1/4” (6.3) (76.2) (152.4) B278 POST BASE FOR FOUR POST BASE FOR B22 CHANNEL COMBINATIONS •Standard finishes: ZN, GRN (152.4) 6” 3” (76.2) B570A 3” 6” (152.4) 41/4” 3” (152.4) Strut Fittings 15/8” 31/2” 7” (177.8) (14.4) 21/16” (52.4) Reference page 58 for general fitting and standard finish specifications. 84 Brackets B187 BRACKET B188 BRACKET •Uniform Loading 1450 Lbs. (6.45 kN) •Safety Factor of 2.5 •Hole Spacing on Bracket Top 55/16” (150.8) Center to Center •Standard finishes: ZN, GRN •Wt./C 193 Lbs. (87.5 kg) •Uniform Loading 1080 Lbs. (4.80 kN) •Safety Factor of 2.5 •Hole Spacing on Bracket Top 815/16” (227.0) Center to Center •Standard finishes: ZN, GRN •Wt./C 241 Lbs. (109.3 kg) 21/4” 11/16” 11/16” (57.1) (27.0) 21/4” (27.0) (57.1) 4” 9” (101.6) (228.6) 4” (101.6) 12” (304.8) B189 BRACKET B541 BRACKET •Uniform Loading 870 Lbs. (3.87 kN) •Safety Factor of 2.5 •Hole Spacing on Bracket Top 1115/16” (303.2) Center to Center •Standard finishes: ZN, GRN •Wt./C 308 Lbs. (139.7 kg) •Uniform Loading 1240 Lbs. (5.51 kN) •Safety Factor of 2.5 •Hole Spacing on Bracket Top 77/16” (188.9) Center to Center •Standard finishes: ZN, GRN •Wt./C 201 Lbs. (91.2 kg) 11/16” 11/16” (27.0) 21/4” (27.0) (57.1) 4” 4” (101.6) (101.6) 21/4” (57.1) 15” 101/2” (266.7) (381.0) B190 12” (304.8) BRACKET B191-18 18” (457.2) BRACKET •Uniform Loading 900 Lbs. (4.00 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 260 Lbs. (117.9 kg) •Uniform Loading 600 Lbs. (2.67 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 377 Lbs. (171.0 kg) 11/16” 11/16” (27.0) (27.0) 9/16” x 3” SLOT (14.3) (76.2) (101.6) 4” (101.6) 12” 18” (304.8) (457.2) 71/2” (190.5) 71/2” (190.5) 2” 9/16” x 3” SLOT (14.3) (76.2) (50.8) 2” (50.8) Reference page 58 for general fitting and standard finish specifications. 85 Strut Fittings 4” Brackets B191-24 24” (609.6) BRACKET 11/16” (27.0) B192 24” (609.6) BRACKET 11/16” •Uniform Loading 450 Lbs. (2.00 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 377 Lbs. (171.0 kg) •Uniform Loading 820 Lbs. (3.65 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 576 Lbs. (261.3 kg) (27.0) 4” (101.6) 6” (152.4) 24” 24” (609.6) (609.6) 12” 27/16” 71/2” (61.9) (190.5) 9/16” (304.8) 9/16” x 3” SLOT (14.3) (76.2) x 3” SLOT (14.3) (76.2) 2” 2” (50.8) (50.8) B290 161/2” (419.1) BRACKET B289-12 121/2” (317.5) BRACKET •Uniform Loading 1200 Lbs. (5.34 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 405 Lbs. (183.7 kg) •Uniform Loading 1040 Lbs. (4.63 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 285 Lbs. (129.3 kg) 13/16” 13/16” 13/16” (30.1) (30.1) (30.1) 13/16” (30.1) 6” 51/4” (152.4) (133.3) 31/4” 6” 31/8” (79.4) (82.5) (152.4) 161/2” 31/8” 121/2” (317.5) (79.4) (419.1) 33/4” (95.2) 53/4” (146.0) 21/2” 13/16” 21/2” (63.5) (30.1) (63.5) 13/16” (30.1) B289-14 141/2” (368.3) BRACKET B291 181/2” (469.9) BRACKET •Uniform Loading 900 Lbs. (4.00 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 295 Lbs. (133.8 kg) •Uniform Loading 1070 Lbs. (4.76 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Wt./C 468 Lbs. (212.3 kg) 13/16” 13/16” (30.1) (30.1) 13/16” (30.1) Strut Fittings (30.1) 31/4” 6” (152.4) 13/16” (82.5) 6” 31/8” 141/2” (152.4) 51/4” (133.3) (79.4) (368.3) (79.4) 53/4” (63.5) (469.9) 73/4” (196.8) (146.0) 21/2” 31/8” 181/2” 21/2” 13/16” (63.5) (30.1) 13/16” (30.1) Reference page 58 for general fitting and standard finish specifications. 86 Brackets B292 201/2” (520.7) BRACKET B297 DOUBLE CHANNEL BRACKET •Uniform Loading 600 Lbs. (2.67 kN) •Safety Factor of 2.5 •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 490 Lbs. (222.2 kg) 2” (20.6) (50.8) 3/8” 61/4” (158.7) •Safety Factor of 2.5 •Standard finishes: ZN, GRN, HDG 13/16” (30.1) 13/16” (9.5) A 13/16” (30.1) 6” 45/8” (117.5) 71/4” (184.1) (152.4) 201/2” 31/8” Part No. B297-12 B297-18 B297-24 B297-30 B297-36 B297-42 (520.7) (79.4) 73/4” 21/2” (196.8) (63.5) 13/16” (30.1) B409 SINGLE CHANNEL BRACKET •Safety Factor of 2.5 •Standard finishes: ZN, GRN, SS4 13/16” Uniform Load Lbs. kN (304.8) 1660 (7.37) (457.2) 1100 (4.88) (609.6) (3.71) 835 (762.0) (2.95) 665 (914.4) (2.44) 550 (1066.8) (2.06) 465 A 12” 18” 24” 30” 36” 42” BRACED SINGLE BRACKET (38.1) (20.6) H 2” 45/8” (117.5) 15/8” (50.8) Wt./C Lbs. kg (220.0) 485 (303.0) 668 (388.7) 857 1040 (471.7) 1240 (562.4) 1440 (653.2) B494 11/2” 13/16” (20.6) B22A L •Safety Factor of 2.5 •Standard finishes: ZN, GRN (41.3) 4” A (101.6) 3” (76.2) Part No. B409-6 B409-9 B409-12 B409-14 B409-16 B409-18 B409-24 Uniform Load Lbs. kN (8.54) 1920 (5.69) 1280 (4.27) 960 (3.56) 800 A 6” 9” 12” 14” 16” 18” 24” (152.4) (228.6) (304.8) (355.6) (406.4) (457.2) (609.6) 730 (3.25) (2.84) (2.13) 640 480 B22 314 347 450 L&R SLOTTED BRACKET •Safety Factor of 2.5 •Specify L for left or R for right bracing •Material: ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN, GRN 2” A B 13/32” x 1” SLOT (10.3) (25.4) 2” 1” (50.8) (25.4) MOUNTING HOLE 7/16” (11.1) DIA. (142.4) (157.4) (204.1) Part No. B174SH B175SH B176SH B177SH B178SH B179SH B180SH B181SH B182SH B183SH B184SH B185SH B186SH L 12” (304.8) 18” (475.2) 24” (609.6) 30” (762.0) 36” (914.4) 42” (1066.8) 48” (1219.2) A 24” 26” 28” 30” 12” 14” 16” 18” 20” 22” 6” 8” 10” H (609.6) (660.4) (711.2) (762.0) (304.8) (355.6) (406.4) (457.2) (508.0) (558.8) (152.4) (203.2) (254.0) 83/4” 83/4” 83/4” 111/4” 111/4” 16” 16” (222.2) (222.2) (222.2) (285.7) (285.7) (406.4) (406.4) B 67/16” 615/16” 77/16” 715/16” 37/16” 315/16” 47/16” 415/16” 57/16” 515/16” 115/16” 27/16” 215/16” (163.5) (176.2) (188.9) (201.6) (87.3) (100.0) (112.7) (125.4) (138.1) (150.8) (49.2) (61.9) (74.6) Right bracket shown, left bracket gussett on opposite side. Reference page 58 for general fitting and standard finish specifications. 87 B42 Uniform Load Lbs. kN 1580 (7.02) 1000 (4.45) 996 (4.43) 924 (4.11) 864 (3.84) 580 (2.58) 500 (2.22) Uniform Load Lbs. kN 225 (1.00) 225 (1.00) 225 (1.00) 225 (1.00) 350 (1.55) 350 (1.55) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 225 (1.00) 225 (1.00) 325 (1.44) Wt. /C Lbs. kg 364 (165.1) 479 (217.3) 716 (324.8) 927 (420.5) 1095 (496.7) 1400 (635.0) 1510 (684.9) Wt./C Lbs. kg 370 (167.8) 425 (192.8) 480 (217.7) 520 (235.9) 143 (64.8) 162 (73.5) 204 (92.5) 232 (105.2) 275 (124.7) 317 (143.8) 58 (26.3) 82 (37.2) 103 (46.7) Strut Fittings (50.8) DIA. HOLES Part No. B494-12 B494-18 B494-24 B494-30 B494-36 B494-42 B494-48 Wt./C Lbs. kg (68.9) 152 (88.4) 195 (105.2) 232 (124.3) 274 B174SH-B186SH 9/32” (7.1) Inside Brace on B494-24 and Larger. Brackets 13/16” B196 CHANNEL CLEVIS BRACKET B198 CHANNEL CLEVIS BRACKET (20.6) •Safety Factor of 2.5 •Standard finishes: ZN, GRN •Safety Factor of 2.5 53/8” •Standard finishes: (136.5) ZN, GRN 13/16” (20.6) 31/2” (88.9) A 35/8” A (92.1) B22 B22 Part No. B196-18 B196-24 A (A) 18” 24” (457.2) (609.6) Uniform Load Lbs. kN 600 450 (2.67) (2.00) Part No. Wt./C Lbs. kg 430 510 B198-6 B198-12 (195.0) (231.3) B198A (A) 6” 12” (152.4) (304.8) Uniform Load Lbs. kN 1600 800 •Safety Factor of 2.5 •Standard finishes: ZN, GRN (20.6) (3.56) 185 284 (83.9) (128.8) (20.6) CHANNEL BRACKET 13/16” (7.12) Wt./C Lbs. kg 13/16” B293 CHANNEL CLEVIS BRACKET •Safety Factor of 2.5 •Standard finishes: ZN, GRN A 31/2” 11/2” (88.9) (38.1) 31/2” A (88.9) A B22 Part No. B22 Part No. B198A-6 B198A-12 A (A) 6” 12” (152.4) (304.8) B293A CHANNEL BRACKET •Safety Factor of 2.5 •Standard finishes: ZN, GRN Uniform Load Lbs. kN Wt./C Lbs. kg 1600 800 185 284 (7.12) (3.56) B293-6 B293-12 B293-18 B293-24 (83.9) (128.8) 11/2” (38.1) Strut Fittings A B293A-6 B293A-12 B293A-18 B293A-24 6” 12” 18” 24” (152.4) (304.8) (457.2) (609.6) Uniform Load Lbs. kN 1200 600 400 300 (152.4) (304.8) (457.2) (609.6) 1200 600 400 300 (5.34) (2.67) (1.78) (1.33) Wt./C Lbs. kg 144 252 340 412 (65.3) (114.3) (154.2) (186.9) (5.34) (2.67) (1.78) (1.33) B22 63/8” (161.9) B22 (A) 6” 12” 18” 24” Uniform Load Lbs. kN •Safety Factor of 2.5 •6300 In.-Lbs (712 N•m) applies to fitting only, not to strength of strut arm •Refer to page 217 for strut 13/32” loading data (27.8) •Standard finishes: ZN, GRN •Wt./C 210 Lbs. (95.2 kg) (20.6) (88.9) A (A) B194 BRACKET FOR B22 & B24 13/16” 31/2” Part No. A Wt./C Lbs. kg 144 252 340 412 (65.3) 23/16” (114.3) (55.6) (154.2) 33/4” (186.9) (95.3) Reference page 58 for general fitting and standard finish specifications. 88 B22 Brackets B370 BRACKET FOR B22A & B11 B195 BRACKET FOR B42 •Safety Factor of 2.5 13/32” •13000 In.-Lbs (1469 N•m) applies to (27.8) fitting only, not to strength of strut arm •Refer to page 217 for strut loading data •Standard finishes: ZN, GRN •Wt./C 266 Lbs. (120.6 kg) •Safety Factor of 2.5 •2500 In.-Lbs (282 N•m) applies to fitting only, not to strength of strut arm •Refer to page 217 for strut loading 21/8” data (54.0) •Standard finishes: ZN, GRN •Wt./C 174 Lbs. (78.9 kg) B22 B22 8” 37/8” (203.2) (98.4) 315/16” B22A (100.0) B42 33/4” 33/4” (95.2) (95.2) B440 B449-4, 8 & 12 BRACKET FOR B52 & B54 CABLE SADDLE BRACKET •Safety Factor of 2.5 •2000 In.-Lbs (226 N•m) applies to fitting only, not to strength of strut arm •Refer to page 217 for strut loading data •Standard finishes: ZN, GRN 21/8” •Wt./C 177 Lbs. (80.3 kg) •Safety Factor of 2.5 •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN B22 (54.0) 13/16” (20.6) B A 37/8” (98.4) 2” (50.8) Part No. B52 A Uniform Load Wt./C Lbs. kN Lbs. kg B B449-4 41/2” (114.3) 23/8” (60.3) B449-8 81/2” (215.9) 23/8” (60.3) B449-12 121/2” (317.5) 4” (101.6) 33/4” (95.2) B449-18 18” (457.2) CABLE SADDLE BRACKET 2400 (10.67) 74 (33.5) 1270 (5.65) 124 (56.2) 860 (3.82) 184 (83.4) B293PL •Safety Factor of 2.5 •Uniform Load 960 Lbs. (4.17 kN) •Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 •Standard finishes: ZN, GRN •Wt./C 312 Lbs. (141.5 kg) BRACKET PLATE ONLY •Standard finishes: ZN, GRN •Wt./C 46 Lbs. (20.8 kg) 13/16” 2” (50.8) 11/2” 4” (38.1) (101.6) 31/2” 18” 120° (88.9) 13/16” (457.2) (20.6) 11/4” (31.7) Reference page 58 for general fitting and standard finish specifications. 89 Strut Fittings (20.6) Brackets B816 B852S-W-D •Standard finishes: ZN, HDG •Specify W = 8, 12, 16 •Specify D = 6, 8, 10, 12, 16, 18, 24 •13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band •Standard finishes: ZN, HDG NEW NEW 2” 13/32” (10.3) DIA. (50.8) 61/2” (165.1) 13/16” (20.6) DIA. 23/8” (60.3) 21/8” (54.0) 9/16” (355.6) (355.6) 725/32” (14.3) 14” 14” (197.6) 9/16” x 29/16” SLOT (14.3) (65.1) W D 11/16” x 1” SLOT (17.4) (25.4) 13/16” x 1” SLOT (20.6) (25.4) B802D-W B810-W •Specify W = 8, 12, 16 •Standard finishes: ZN, HDG •Specify W = 8, 12, 16 •13/16” (20.6mm) x 1” (25.6mm) banding slots for steel band •Standard finishes: ZN, HDG NEW NEW 13/16” (20.6) DIA. 13/32” (10.3) DIA. Strut Fittings 13/16” (20.6) DIA. 95/8” (244.5) W 725/32” (197.6) W Reference page 58 for general fitting and standard finish specifications. 90 13/16” x 1” SLOT (20.6) (25.4) Brackets B811-W B812-* •Can be attached directly to B809 & B812 •Specify W = 8, 12, 16 •Standard finishes: ZN, HDG •Specify D = 6, 8, 10, 12, 16, 18, 24 •13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band •Standard finishes: ZN, HDG NEW NEW 121/32” (42.1) 13/32” (10.3) DIA. 13/16” (20.6) DIA. W 27/16” 725/32” (61.9) (197.6) 13/16” x 1” SLOT (20.6) (25.4) D 13/16” (20.6) B809B-* •Specify D = 6, 8, 10, 12, 16, 18, 24 •13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band •Standard finishes: ZN, HDG NEW 13/32” (10.3) DIA. 13/16” (20.6) DIA. D Part No. D H mm In. mm B809B-6 6” (152.4) 123/4” (323.9) B809B-8 8” (203.2) 143/4” (374.7) (254.0) 163/4” (425.5) (304.8) 183/4” (476.2) (577.8) B809B-10 B809B-12 10” 12” B809B-16 16” (406.4) 223/4” B809B-18 18” (457.2) 243/4” (628.6) B809B-24 24” (609.6) 273/4” (704.8) 725/32” (197.6) 13/16” x 1” SLOT (20.6) (25.4) H Reference page 58 for general fitting and standard finish specifications. 91 Strut Fittings In. Miscellaneous Fittings B214 R&L B514 R&L •Standard finishes: ZN, GRN •Wt./C 200 Lbs. (90.7 kg) •Standard finishes: ZN, GRN •Wt./C 246 Lbs. (111.6 kg) REEL RACK SUPPORT FOR 11/4” (32) PIPE 3” 3” (76.2) (76.2) 53/8” (136.5) 53/8” (136.5) REEL RACK SUPPORT FOR 2” (50) PIPE B214L LEFT HAND (92.1) (92.1) 53/8” (136.5) B514R RIGHT HAND B475 B514L LEFT HAND B473 DOUBLE REEL RACK SUPPORT ON SINGLE CHANNEL FOR 11/4” (32) PIPE •Standard finishes: ZN, GRN •Wt./C 326 Lbs. (147.9 kg) 35/8” 53/8” (136.5) A B214R RIGHT HAND 35/8” DOUBLE REEL RACK SUPPORT ON SINGLE CHANNEL FOR 2” (50) PIPE •Standard finishes: ZN, GRN •Wt./C 351 Lbs. (159.2 kg) 3” 3” (76.2) (76.2) 9” 9” (228.6) (228.6) B474 B472 •Standard finishes: ZN, GRN •Wt./C 257 Lbs. (116.6 kg) •Standard finishes: ZN, GRN •Wt./C 299 Lbs. (135.6 kg) DOUBLE REEL RACK CHANNEL FOR 11/4” (32) PIPE DOUBLE REEL RACK SUPPORT ON DOUBLE CHANNEL FOR 2” (50) PIPE 31/4” 31/4” (82.5) Strut Fittings (82.5) 53/8” (136.5) 53/8” (136.5) Reference page 58 for general fitting and standard finish specifications. 92 Miscellaneous Fittings B664 B438 •Standard finishes: ZN, GRN •Wt./C 154 Lbs. (69.8 kg) •Standard finishes: ZN, GRN •Material: ASTM A36 •Wt./C 132 Lbs. (59.9 kg) DOUBLE PIPE SUPPORT FOR 11/4” (32) PIPE PIPE SUPPORT BRACKET 13/4” 35/16” (44.4) (84.1) 41/4” HOLES 9/16”(14.3) (107.9) 31/2” (88.9) 13/4” (44.4) 3/8” (9.5) 4” 213/16” 325/32” (71.4) (96.0) (101.6) B439 B411 SERIES •Standard finishes: ZN, GRN •Wt./C 88 Lbs. (39.9 kg) •Standard finishes: ZN, GRN PIPE SUPPORT BRACKET LADDER RUNGS 13/16” (20.6) A 31/2” (88.9) 13/16” (20.6) 1/4” 4” (6.3) (101.6) B381-B385 A (A) B411-12 B411-15 B411-18 12” 15” 18” (304.8) (381.0) (457.2) Wt./C Lbs. kg 176 202 234 (79.8) (91.6) (106.1) B587-1/2, 3/4 & 1 WALL LADDER BRACKETS PIPE COUPLING FITTING 13/16” •Standard finishes: ZN, GRN •Safety Factor of 2.5 •Standard finishes: ZN, GRN (20.6) C Part No. B Design Load 2” I.D. A (50.8) (68.2) Part No. B381 B382 B383 B384 B385 A 23/8” 43/8” 63/8” 63/8” 63/8” (A) (60.3) (111.1) (161.9) (212.7) (263.5) B 6” 8” 10” 12” 14” (B) (152.4) (203.2) (254.0) (304.8) (355.6) C 75/8” 95/8” 115/8” 135/8” 155/8” (C) (193.7) (244.5) (295.3) (346.1) (396.9) Wt./C Lbs. kg 110 (49.9) 164 (74.4) 200 (90.7) 253 (114.7) 318 (144.2) Part No. B587-1/2 B587-3/4 B587-1 For Pipe Size 1/2” (15) 3/4” (20) 1” (25) Wt./C Lbs. kg Design Load Lbs. kN 77 84 105 1000 (4.45) 1400 (6.23) 1900 (8.45) Reference page 58 for general fitting and standard finish specifications. 93 (34.9) (38.1) (47.6) Strut Fittings 53/8” (136.5) 211/16” Miscellaneous Fittings B349 B350 •Design Load 1200 Lbs. (5.34 kN) •Safety Factor of 2.5 •Use 3/8” x 3” bolts in side hole to clamp strut together (not included) •Standard finishes: ZN, GRN 9/16”(14.3) DIA. •Wt./C 107 Lbs. (48.5 kg) •Design Load 1200 Lbs. (5.34 kN) •Use 3/8” x 3” bolts in side hole to clamp strut 21/8” together (not included) (54.0) •Standard finishes: ZN, GRN 9/16”(14.3) DIA. •Wt./C 233 Lbs. (105.7 kg) TROLLEY BEAM SUPPORT TROLLEY BEAM JOINT SUPPORT 21/8” (54.0) 1 HOLE 315/16” 1 HOLE 315/16” 31/2” (100.0) (100.0) (88.9) 7/16”(11.1) DIA. 7/16”(11.1) DIA. 11/32” (26.2) 6 HOLES 11/32” 2 HOLES (26.2) 13/32” 15/8” 121/32” (41.3) 121/32” (42.0) (42.0) 21/32” (27.8) (16.7) B614 B613 B613A •Quick installation (one bolt to tighten) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B22 and B24 Channel •Sold in pairs •Standard finish: ZN •Wt./C 50 Lbs. (22.6 kg) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B22 and B24 Channel •Setscrews to be torqued to 19 ft./Lbs •Sold in pairs •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B52 and B54 Channel •Setscrews to be torqued to 19 ft./Lbs •Sold in pairs •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B52 15/8” NEW 15/8” (41.3) (41.3) 31/2” 31/2” (88.9) 3/8” x 2” CONE 3/8” x 2” CONE POINT SETSCREWS POINT SETSCREWS B560 B562 •Standard finishes: ZN, GRN •Wt./C 220 Lbs. (99.8 kg) •Standard finishes: ZN, GRN •Wt./C 206 Lbs. (93.4 kg) 37-1/2° STAIR SUPPORT 45° STAIR SUPPORT 87/8” (225.4) 87/8” (225.4) Strut Fittings (88.9) 31/2” 31/2” (88.9) 11/16” 31/2” 17/8” (88.9) 13/16” 31/2” (27.0) 45° 13/16” (47.6) (88.9) (27.0) 17/8” (88.9) (20.6) (20.6) 11/16” 371/2° 33/4” 33/4” (95.2) (95.2) Reference page 58 for general fitting and standard finish specifications. 94 (47.6) Miscellaneous Fittings B376 35/16” FOUR BEARING TROLLEY ASSEMBLY B377 TWO BEARING TROLLEY ASSEMBLY 15/16” (84.1) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling BEARING O.D. applications 13/16” •Standard finishes: ZN •Wt./C 48 Lbs. (21.8 kg) (20.6) (33.3) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling applications •Standard finishes: ZN 33/8” •Wt./C 110 Lbs. (49.9 kg) (85.7) 11/8” (28.6) (15.9) 31/8” (23.8) (79.4) 300 450 600 (1.33) (2.00) (2.67) RPM Design Load in B22 Lbs. kN Design Load 150 225 437 @600 @300 @100 11/8” (28.6) BEARING O.D. 33/8” 13/16” (85.7) (20.6) RPM @600 @300 @100 (.67) (1.00) (1.94) B477 11/4” (31.7) Design Load B478 TWO BEARING LIGHT DUTY TROLLEY ASSEMBLY FOUR BEARING LIGHT DUTY TROLLEY ASSEMBLY •Design Load 50 Lbs. (.22 kN) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling applications •Material:12 Gauge (2.6) ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN •Wt./C 30 Lbs. (13.6 kg) 11/4” (31.7) 11/8” 13/4” (28.6) (44.4) B477P •Design Load 100 Lbs. (.44 kN) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling applications •Material:12 Gauge (2.6) ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN •Wt./C 68 Lbs. (30.8 kg) B478P WITH PLASTIC BEARINGS 11/32” •Design Load 10 Lbs. (.045 kN) 5/8” (15.9) 9/32” (7.1) (8.7) WITH PLASTIC BEARINGS •Design Load 20 Lbs. (.090 kN) 9/32” DIA. HOLE (7.1) x 9/16” DIA. HOLE (14.3) 11/4” (31.7) 3/4” (19.0) 3” (76.2) 2” (50.8) Design Load 9/32” (7.1) SLOT-(2) 3/4” (19.0) (33.3) 5/8” 15/16” Design Load in B22 Lbs. kN 15/16” Design Load B477H B478H •Design Load 50 Lbs. (.22 kN) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling applications •Material:12 Gauge (2.6) ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN •Wt./C 36 Lbs. (16.3 kg) •Design Load 100 Lbs. (.44 kN) •Safety Factor of 2.5 •Stainless steel ball bearings •Not for continuous cycling applications •Material:12 Gauge (2.6) ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN •Wt./C 72 Lbs. (32.6 kg) FOUR BEARING LIGHT DUTY TROLLEY ASSEMBLY WITH EYE HOOK TWO BEARING LIGHT DUTY TROLLEY ASSEMBLY WITH EYE HOOK 11/4” (31.7) (28.6) B477HP WITH PLASTIC BEARINGS •Design Load 10 Lbs. (.045 kN) 3/4” I.D (19.0) B478HP WITH PLASTIC BEARINGS 315/16” (100.0) 11/32” 1/4” (6.3) EYE ROD •Design Load 20 Lbs. (.090 kN) (8.7) 3/4” I.D (19.0) Design Load Reference page 58 for general fitting and standard finish specifications. 95 1/4” (6.3) EYE ROD Design Load Strut Fittings 11/8” Miscellaneous Fittings B203-B206 & B220-B223 B283-B286 CHANNEL END CAPS TYPE X Part No. B203 B204 B205 B206 B220 B221 B222 B223 Use With A (A) B42 B54 B22 B32 B52 B12 B11 B24 1.015 .827 1.640 1.390 .827 2.452 3.265 1.640 (25.8) (21.0) (41.6) (35.3) (21.0) (62.3) (82.9) (41.6) CHANNEL END CAPS A •Material: ASTM A1011 CS Type B •Standard finishes: ZN, GRN, HDG, SS4, AL •Material: ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN, GRN A Wt./C Lbs. kg 6 5 10 8 4 15 20 10 B (2.7) (2.2) (4.5) (3.6) (1.8) (6.8) (9.1) (4.5) Part No. Use With A B283 B284 B285 B286 B52 B54 & B56 B22 B24 & B26 119/32” 119/32” 119/32” 119/32” (A) B (B) (40.5) 25/32” (19.8) (40.5) 25/32” (19.8) (40.5) 119/32” (40.5) (40.5) 119/32” (40.5) B287 & B288 B3322, B3332, B3342, B3352 •Material: ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN, GRN •Material: ASTM A1011 33,000 PSI min. yield •Standard finishes: ZN CHANNEL END CAPS Wt./C Lbs. kg 6 6 13 14 (2.7) (2.7) (5.9) (6.3) ANCHOR END CAPS TYPE Y 3/8” (9.5) 119/32” 119/32” (40.5) (40.5) DIA. HOLE 25/8” (66.7) A 113/16” Part No. B287 B288 Use With B22 B24 Wt./C Lbs. kg 13 14 (5.9) (6.3) B Part No. Use With A (A) B (B) B3322 B3332 B3342 B3352 B22I B32I B42I B52I 1.270 1.000 .645 .460 (32.2) (25.4) (16.4) (11.7) 13/16” 13/16” 11/4” 15/16” (30.2) (30.2) (31.8) (33.3) Wt./C Lbs. kg 15 15 15 15 (6.8) (6.8) (6.8) (6.8) B822 B822A B852 •Material: Soft White PVC •Wt./C 3 Lbs. (1.3 kg) •Available in colors: White (W), Yellow (Y), Black (BLK), Gray (GRY), Green (GRN) •Material: Soft White PVC •Wt./C 5 Lbs. (2.2 kg) •Available in colors: White (W), Yellow (Y), Black (BLK), Gray (GRY), Green (GRN) •Material: Soft White PVC •Wt./C 2.5 Lbs. (1.1 kg) •Available in colors: White (W), Yellow (Y), Black (BLK), Gray (GRY), Green (GRN) PLASTIC END CAP FOR B22 & B24 Strut Fittings (46.0) 11/4” (31.7) PLASTIC END CAP FOR B22A & B11 PLASTIC END CAP FOR B52 11/4” 11/4” (31.7) (31.7) Reference page 58 for general fitting and standard finish specifications. 96 Miscellaneous Fittings B823 B825 PROFILE END CAPS PLASTIC END CAPS •Material: PVC •Available in colors: White (W), Yellow (Y), Black (BLK), Gray (GRY), Green (GRN) NEW •Material: Polyurethane •Available in colors: Gray (GRY), Green (GRN) NEW Approx. 3/4” deep (19.0) Part No. B823-22A B823-22 B823-42 B823-52 Fits Channel Sizes B22A, B24A, B26A B22, B24, B26 B42 B52, B54, B56 Wt./C Lbs. kg 6.9 4.1 3.8 3.5 (3.1) (1.8) (1.7) (1.6) Part No. B825-22 B825-52 Fits Channel Sizes B22 & B24 B52 & B54 Wt./C Lbs. kg 2.0 1.0 (0.9) (0.4) Strut Fittings Reference page 58 for general fitting and standard finish specifications. 97 Beam Clamps Beam Clamps B-Line’s beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding . A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with B-Line channels and offer many installation advantages. Materials & Finishes (Unless otherwise noted) Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code Finish PLN Plain ZN GRN – HDG CZ SS4 SS6 AL Electro-Plated Zinc Dura-Green Malleable Iron Hot-Dipped Galvanized Chromium Zinc Stainless Steel Type 304 Stainless Steel Type 316 Aluminum Specification ASTM A1018 Gr. 33 ASTM A1011 SS Grade 33 ASTM B633 SC3 Type III ASTM A47 Gr. 32510 ASTM A123 ASTM F1136 ASTM A240 ASTM A240 ASTM B209 Note: A minimum order may apply on special material and finishes. Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load). Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm 1/4”-20 3/8”-16 1/2”-13 4 5 5 7 11 15 Setscrew Size Foot/Lbs. Nm 5/8”-11 3/4”-10 21 28 34 46 See chart on page 58 for bolt torque. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 98 Beam Clamps B351L D STEEL C-CLAMP WITH LOCKNUT MAX. FLANGE THICKNESS •Safety Factor of 5 •Setscrew and locknut included •When Retaining Strap is required, order B3362, B3363 or B3365 separately •Standard finishes: ZN, SS4, PLN * B B 23/8” 23/8” 23/8” 23/8” 3” C 23/8” 23/8” 21/4” 31/4” 31/4” (60.3) (60.3) (60.3) (60.3) (76.2) D (60.3) (60.3) (57.1) (82.5) (82.5) 3/4” 3/4” 3/4” 3/4” 1” E (19.0) (19.0) (19.0) (19.0) (25.4) 13/8” 13/8” 13/8” 13/8” 17/8” (34.9) (34.9) (34.9) (34.9) (47.6) Design Load Lbs. kg 230 (1.03) 380 (1.71) 550 (2.47) 630 (2.83) 1200 (5.34) Beam Clamps Rod Size A 3/8”-16 1/2”-13 5/8”11 3/4”-10 7/8”-9 SIZES ONLY ROD SIZE A C Part Number With Locknut B351L-3/8 * B351L-1/2 * B351L-5/8 * B351L-3/4 * B351L-7/8 3/8 THRU 3/4 E Wt./C Lbs. kg 41 (18.6) 41 (18.6) 60 (27.2) 71 (32.2) 184 (83.4) 3/4” (19.0) B3036L MAX. FLANGE THICKNESS C-CLAMP WITH LOCKNUT •Safety Factor of 5 •When Retaining Strap is required, order B3363 or B3364 separately •Setscrew and locknut included •Material: Malleable iron •Standard finishes: ZN, PLN Part Number With Locknut B3036L-3/8 B3036L-1/2 B3036L-5/8 B3036L-3/4 Rod Size A 3/8”-16 1/2”-13 5/8”-11 3/4”-10 B 13/4” 13/4” 2” 2” C (44.4) (44.4) (50.8) (50.8) 13/4” 13/4” 17/8” 2” Design Load Lbs. kg 400 (1.78) 400 (1.78) 450 (2.00) 500 (2.22) (44.4) (44.4) (47.6) (50.8) B3362 THRU B3365 RETAINING STRAP •*When ordering specify L (Length) as a suffix to the part number •Material: 14 Gauge (1.9) •Standard finishes: ZN, SS4, PLN B B ROD SIZE A Wt./C Lbs. kg 29 (13.1) 28 (12.7) 55 (24.9) 72 (32.6) C 3/4” (19.0) L A Part No. B3362* B3363* B3364* B3365* 6” (152.4) Lbs. kg 17 (7.7) 16 (7.2) 16 (7.2) 21 (9.5) Wt./C for Length L of 8” (203.2) 10” (254.0) 12” (304.8) A Lbs. kg Lbs. kg Lbs. kg 24 (10.9) 31 (14.0) 38 (17.2) 11/4” (31.7) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 29 (13.1) 37 (16.8) 46 (20.8) 11/2” (38.1) B 7/16” (11.1) 5/8” (15.9) 11/16” (17.4) 3/4” (19.0) For Use With B351-3/8 & 1/2 B351-5/8 & 3/4 B3036-3/8 & 1/2 B3036-5/8 & 3/4 B351-7/8 *See note above. B3037 3” Z-PURLIN C-CLAMP (76.2) •Design Load 500 Lbs. (2.22 kN) •Safety Factor of 5 •Designed for attaching a 3/8”-16 hanger rod to the bottom flange of a Z-purlin •Setscrew and locknut included •Material: Malleable iron •Standard finishes: ZN, PLN 313/32” (86.5) Bottom Hanger Rod Threads 3/8”-16 Reference page 98 for general fitting and standard finish specifications. 99 Beam Clamps B3033 THROAT OPENINGS 11/4” (31.7) FOR 3/8 & 1/2 SIZES REVERSIBLE WIDE JAW WEDGE C-CLAMP (MALLEABLE IRON) Beam Clamps •Safety Factor of 5 •Setscrew and locknut included •Material: Malleable iron •Standard finishes: ZN, PLN Part No. Rod Size A B3033-3/8 B3033-1/2 B3033-5/8 B3033-3/4 3/8”-16 1/2”-13 5/8”-11 3/4”-10 D 15/16” (33.3) FOR 5/8 & 3/4 SIZES B 21/4” 25/16” 25/8” 211/16” C C (57.1) 2” (58.7) 23/16” (66.7) 21/2” (68.3) 21/2” Design Load Wt./C Lbs. kN Lbs. kg D (50.8) (55.5) (63.5) (63.5) 11/8” 11/4” 13/8” 17/16” (28.6) (31.7) (34.9) (36.5) 500 810 1000 1400 (2.22) (3.60) (4.48) (6.22) 46 64 116 140 B UL Max. Pipe Size (20.8) 4” (29.0) 8” (52.6) 8” (63.5) 10” (100) (200) (200) (250) ROD SIZE A THOAT OPENING B3034 WEDGE C-CLAMP •Safety Factor of 5 •3/4” (19.0) Max. Flange Thickness •Setscrew and locknut included •Material: Malleable iron •Standard finishes: ZN, PLN Part No. Rod Size A B3034-3/8* B3034-1/2* B3034-5/8 B3034-3/4 3/8”-16 1/2”-13 5/8”-11 3/4”-10 B 15/8” 113/16” 13/4” 2” NOTE: 3/8” & 1/2” SIZES C * D 3/8 & 1/2 ARE REVERSIBLE STYLE SIZES ONLY B C (41.3) 2” (46.0) 23/16” (44.5) 21/8” (50.8) 21/4” Design Load Wt./C Lbs. kN Lbs. kg D (50.8) 7/8” (55.5) 13/16” (54.0) 11/8” (57.2 11/8” (22.2) (30.2) (28.6) (28.6) 560 810 1000 1500 (2.49) (3.60) (4.48) (6.67) 54 51 70 98 (24.5) (23.1) (31.7) (44.4) UL Max. Pipe Size ROD SIZE A 4” (100) 8” (200) ----- 3/4” (19.0) MAX. FLANGE THICKNESS B3367 RETAINING STRAP •Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6), 10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2) •Material: Steel •Standard finishes: ZN, PLN Part No. B3367-3/8-L B3367-1/2-L B3367-5/8-L B3367-3/4-L Hole Dia. D For Use With 7/16” (30.1) 9/16” (30.1) B3033-3/8 & B3034-3/8 B3033-1/2 & B3034-1/2 11/16” (50.8) B3033-5/8 13/16” (63.5) B3033-3/4 D Wt./C** Lbs. kg 23.9 23.6 23.2 22.7 L (10.8) (10.7) (10.5) 11/4” (10.3) (31.7) ** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C. B444 BC442 •Safety Factor of 5 •Max. Flange Thickness 3/4” (19.0) for 1/4 & 5/16 sizes 1” (25.4) for 3/8 & 1/2 sizes •Setscrew included •Material: Malleable iron •Standard finish: ZN Available in HDG with CZ Hardware •Design Load 75 Lbs. (.33 kN) •Safety Factor of 5 •11/16” (17.5) Max. Flange Thickness •Setscrew included •Holes tapped 1/4”-20 (Bottom & Back) •Material: 13 Gauge (2.3) •Standard finish: ZN 13/16” •Wt./C 13 Lbs. (3.9 kg) LIGHT DUTY BEAM CLAMP SERIES ROD SUPPORT A (BOTTOM & BACK) D C (20.6) Part No. B444-1/4 B444-5/16 B444-3/8 B444-1/2 Thread Size A Set Screw 1/4”-20 5/16”-18 1/4”-20 3/8”-16 1/2”-13 1/2”-13 5/8”-11 1/4”-20 C 13/8” 13/8” 17/8” 23/8” Design Load Wt./C Lbs. kN Lbs. kg D (34.9) (34.9) (47.6) (60.3) 13/16” 13/16” 2” 1 2 /2” 150 (.66) 24 150 (.66) 23 (50.8) 350 (7.12) 65 (63.5) 1000 (4.45) 132 (30.1) (10.9) (30.1) (10.4) (29.5) (59.9) Reference page 98 for general fitting and standard finish specifications. 100 11/16” (17.5) 13/4” (44.5) Beam Clamps B210 B210A 5/8” (15.9) MAX. FLANGE THICKNESS BEAM CLAMP (9.5) 3/4” (19.0) 1/2”-13 TAP Bottom Plate Only 2” 11/2” (50.8) (38.1) 3/4” (19.0) MAX. FLANGE THICKNESS BEAM CLAMP •Design Load 300 Lbs. (1.33 kN) •Safety Factor of 5 •3/4” (19.0) Max. Flange Thickness •3/8”-16 Setscrew included •Standard finish: ZN •Wt./C 60 Lbs. (27.2 kg) 1/4” (6.3) 1/2” (12.7) 3/8”-16 TAP Bottom Plate Only 2” 11/2” (50.8) (38.1) B303 THRU B309 BEAM CLAMPS •Safety Factor of 5 •Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2) •Setscrew included •When Retaining Strap is required, order B312 separately •Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m) 1/2”-13 350 in-lbs. (39.5 N•m) •Standard finishes: ZN, HDG Part No. B303 B304 B305 B306 B307 B308 B309 Rod Size A 1/4”-20 5/16”-18 3/8”-16 3/8”-16 1/2”-13 1/2”-13 5/8”-11 Set Screw 3/8”-16 3/8”-16 3/8”-16 1/2”-13 1/2”-13 1/2”-13 1/2”-13 C 25/16” 25/16” 25/16” 27/16” 27/16” 29/16” 29/16” T (58.7) 11 Ga. (58.7) 11 Ga. (58.7) 11 Ga. (61.9) 7 Ga. (61.9) 7 Ga. (65.1) 1/4” (65.1) 1/4” (3.0) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3) 11/8” T (28.6) MAX FLANGE THICKNESS C 21/2” Wt./C Design Load Lbs. kN Lbs. kg 400 (1.78) 72 (32.6) 600 (2.67) 72 (32.6) 600 (2.67) 72 (32.6) 1100 (4.89) 97 (44.0) 1100 (4.89) 97 (44.0) 1500 (6.67) 133 (60.3) 1500 (6.67) 133 (60.3) A (63.5) B321 SERIES BEAM CLAMPS 15/8” •Safety Factor of 5 •111/16” (42.8) Max. Flange Thickness •Setscrew included •When Retaining Strap is required, order B312 separately •Recommended Setscrew Torque: 1/2”-13 350 in-lbs. (39.5 N•m) 5/8”-11 700 in-lbs. (79.0 N•m) •Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3) B321-4 and B321-5 3/8” (9.5) •Standard finishes: ZN, HDG Part No. B321-1 B321-2 B321-3 B321-4 B321-5 Rod Size A Setscrew 3/8”-16 1/2”-13 1/2”-13 1/2”-13 5/8”-11 1/2”-13 5/8”-11 5/8”-11 3/4”-10 5/8”-11 T 111/16” (42.8) MAX FLANGE THICKNESS C 31/4” (82.5) A C 39/16” 39/16” 39/16” 323/32” 323/32” (41.3) T (92.1) 1/4” (6.3) (92.1) 1/4” (6.3) (92.1) 1/4” (6.3) (94.4) 5/16” (7.9) (94.4) 5/16” (7.9) Design Load Lbs. kN Wt./C Lbs. kg 1300 1400 1600 1800 2000 187 186 185 239 238 (5.78) (6.23) (7.12) (8.00) (8.89) (84.8) (84.3) (83.9) (108.4) (107.9) B312 SERIES RETAINING STRAP FOR USE WITH B303 THRU B309 AND B321 SERIES •3/4” (19.0) Max. Flange Thickness •For thicker beams, step up one flange width size •Material: 14 Gauge (1.9) •Standard finishes: ZN, HDG Part No. B312-6 B312-9 B312-12 B312-15 For Flange Width 6” 9” 12” 15” (152.4) (228.6) (304.8) (381.0) 13/4” Wt./C A 9” 12” 15” 18” (228.6) (304.8) (381.0) (457.2) Lbs. kg 22 30 40 49 (10.0) (44.4) A (13.6) 11/4” (18.1) (31.7) (22.2) Reference page 98 for general fitting and standard finish specifications. 101 1/2” (12.7) 1/4” (6.3) Beam Clamps •Design Load 800 Lbs. (3.56 kN) •Safety Factor of 5 •5/8” (15.9) Max. Flange Thickness •1/2”-13 Setscrew included •Standard finish: ZN •Wt./C 100 Lbs. (45.3 kg) 3/8” Beam Clamps B751 B752 •Safety Factor of 5 •3/4” (19.0) Max. Flange Thickness •Setscrew and Locknut included •Maximum ATR Size 1/2” •Use B753 Swivel Nut (not included) •Material: 12 Gauge (2.6) •Standard finish: ZN, HDG •Wt./C 42 Lbs. (19.0 kg) •Design Load 500 Lbs. (2.22 kN) •Safety Factor of 5 •Material: 12 Gauge (2.6) •Use B753 Swivel Nut (not included) •Includes: B751 CLAMP (NOT 1 pc. B752 Swivel Body INCLUDED) 5 3 1 pc. /16”-18 x 1 /4” HHCS 1 pc. 5/16”-18 Hex Nut •Standard finish: ZN •Wt./C 30 Lbs. (13.6 kg) Beam Clamps BEAM CLAMP BEAM CLAMP SWIVEL 1” 2” (25.4) (50.8) OVERALL HEIGHT 31/4” (82.5) 3” (76.2) FOR ROD SIZES 1/4” (6.3) to 1/2” (12.7) Design Load 300 Lbs. (1.33 kN) Design Load 500 Lbs. (2.22 kN) B751-J_-3/8 BEAM CLAMP ASSEMBLY •Includes: 1 pc. B751 Beam Clamp 1 pc. B701 Type J-Hook only 1 pc. SA203-158 Clip 1 pc. 3/8”-16 Hex Nut •1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used •Use B753 Swivel Nut (not included) •Standard finishes: ZN Part No. For Flange Width B751-J4-3/8 B751-J6-3/8 B751-J9-3/8 B751-J12-3/8 3”-6” 5”-9” 8”-12” 11”-15” (76.2-152.4) (127.0-228.6) (203.2-304.8) (279.4-381.0) B701-J_-3/8 J-HOOK B751 CLAMP Lbs. Wt./C 70 78 83 88 kg (31.7) (35.4) (37.6) (39.9) B753 B701 SERIES •Provides a full swivel of 15° in any direction Specify rod size •Standard finish: ZN •1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used •Standard finish: ZN J-HOOK SWIVEL NUT B701-J_-3/8 J-HOOK ONLY SA203-158 CLIP A Part No. Part No. B753-3/8 B753-1/2 For Wt./C Rod Size Lbs. kg 3/8”-16 1/2”-13 4.0 3.4 (1.8) (1.5) B701-J4-3/8 B701-J6-3/8 B701-J9-3/8 B701-J12-3/8 TL 3/8”-16 HEX NUT Thread Length TL A 83/4” 113/4” 143/4” 173/4” (222.2) (298.4) (374.6) (450.8) 51/2” 61/2” 61/2” 61/2” Reference page 98 for general fitting and standard finish specifications. 102 (139.7) (165.1) (165.1) (165.1) Wt./C Lbs. kg 26 34 41 48 (11.8) (15.4) (18.6) (21.8) Beam Clamps B755 B756-3/8 •Safety Factor of 5 •5/8” (15.9) Max. Flange Thickness 3 /8”-16 SQUARE •For 3/8”-16 Hanger Rod only. MACHINE NUTS •Material: 12 Gauge (2.6) •Includes: 1” 1 pc. B755 Beam Clamp (25.4) 1 pc. 3/8” x 2” Square Head Set Screw 2 pcs. 3/8” Square Nut 21/2” •Standard finish: ZN (60.3) •Wt./C 30 Lbs. (13.6 kg) •Design Load 150 Lbs. (0.66 kN) •Safety Factor of 5 •Material: 12 Gauge (2.6) •Includes: 1 pc. B756-3/8 Swing Connector Body 1 pc. 5/16”-18 x 11/4” SHHMS 1 pc. 5/16”-18 Square Nut •Use B753 Swivel Nut (not included) •Standard finish: ZN •Wt./C 15 Lbs. (6.8 kg) 3/8 BEAM CLAMP SWING CONNECTOR FOR SWING CONNECTOR 3/8”-16 ROD Design Load 150 Lbs. (0.66 kN) Beam Clamps 3/8” (9.5) HOLE B755 CLAMP (NOT INCLUDED) OVERALL HEIGHT 7/8” (22.2) 17/8” (47.6) Design Load 300 Lbs. (1.33 kN) B755-3/8-J_ BEAM CLAMP ASSEMBLY •Includes: 1 pc. B755-3/8 Beam Clamp 1 pc. B705 Type J-Hook only 1 pc. B705 Clip 1 pc. 1/4”-20 Square Nut •Standard finish: ZN B755 CLAMP B705-J_ J-HOOK ONLY B705 CLIP Part No. For Flange Width B755-3/8-J4 B755-3/8-J6 B755-3/8-J10 B755-3/8-J12 4”-6” 6”-10” 10”-12” 12”-14” B702 (101.6-152.4) (152.4-254.0) (254.0-304.8) (304.8-355.6) Lbs. Wt./C 47 51 53 55 kg (21.3) (23.1) (24.0) (24.9) B705 SERIES CLEAT •To eliminate the swiveling of the rod when required, use the B702 Cleat and a locking nut. This can be used with the B751 Beam Clamp, B752 Swivel or B756 Swing Connector. •Material: 12 Gauge (2.6) •Standard finish: ZN •Wt./C 6 Lbs. (2.7 kg) J-HOOK B705-J_ J-HOOK ONLY •Use with B755-3/8 •Standard finish: ZN B705 CLIP A 1/4”-20 TL MACHINE NUT 17/32” (30.9) Part No. 1” (25.4) 13/32” (10.3) DIA. HOLE B705-J4 B705-J6 B705-J10 B705-J12 Thread Length TL A 73/8” 113/8” 133/8” 153/8” (187.3) (288.9) (339.7) (390.5) 3” 41/2” 41/2” 41/2” Reference page 98 for general fitting and standard finish specifications. 103 (76.2) (114.3) (114.3) (114.3) Wt./C Lbs. kg 17 21 23 25 (7.7) (9.5) (10.4) (11.3) Beam Clamps B750 SERIES Beam Clamps BEAM CLAMP 1/2”-13 ROD •Safety Factor of 5 •Design Load 500 Lbs. (2.22 kN) •Recommended Torque: J-Hook Nut 125 in-lbs. (14.1 N•m) •Maximum Flange Thickness 5/8” (15.9) •Standard finish: ZN & HEX NUT SOLD SEPARATELY 7 Ga (4.6) Wt./C Part No. For Flange Width Lbs. 15/8” kg 127/32” (46.8) (41.3) B750-J4 B750-J6 B750-J9 B750-J12 3”-6” 5”-9” 8”-12” 11”-15” 109 124 135 147 (76.2-152.4) (127.0-228.6) (203.2-304.8) (279.4-381.0) (49.4) (56.2) (61.2) (66.7) B700 SERIES J-HOOK •Includes: 1 pc. J-Bolt 1 pc. Hex Nut •Maximum Flange Thickness 5/8” (15.9) •Standard finish: ZN 1/2”-13 THREADS TL A Part No. Thread Length TL A B700-J4 B700-J6 B700-J9 B700-J12 81/2” 111/2” 141/2” 171/2” (215.9) (292.1) (368.3) (444.5) 63/4” 93/4” 123/4” 153/4” (171.4) (247.6) (323.8) (400.0) Wt./C Lbs. kg 44 53 63 78 (19.9) (24.0) (28.6) (35.4) B500 SERIES SQUARE U-BOLT •Includes: 1 pc. U-Bolt only 2 pcs. 3/8”-16 Hex Nuts •Additional sizes available •Standard finish: ZN, SS4 121/32” (42.1) 21/2” (63.5) A 3/8”-16 THREADS Part No. B500-3-3/8 B500-5 Channel Size A 33/8” 5” (85.7) (127.0) 15/8” x 15/8” 31/4” x 15/8” Wt./C Lbs. kg 25 33 (11.3) (14.9) Reference page 98 for general fitting and standard finish specifications. 104 Beam Clamps B441-22 B441-22A B314 •Design Load 1200 Lbs. (5.34 kN) when used in pairs •Safety Factor of 5 •3/4” (19.0) Max. Flange Thickness •For use with 13/16” (20.6) to 15/8” (41.3) high channel •Recommended Torque: 150 in-lbs. (16.9 N•m) •Sold in pieces •Other flange thickness variations are available, contact B-Line Engineering for sizes •Standard finishes: ZN, HDG, SS4 •Wt./C 87 Lbs. (39.4 kg) •Design Load 1200 Lbs. (5.34 kN) when used in pairs •Safety Factor of 5 •3/4” (19.0) Max. Flange Thickness •For use with 15/8” (41.3) to 31/4” (82.5) high channel •Recommended Torque: 150 in-lbs. (16.9 N•m) •Sold in pieces •Other flange thickness variations are available, contact B-Line Engineering for sizes •Standard finishes: ZN, HDG, SS4 •Wt./C 93 Lbs. (42.2 kg) •Design Load 900 Lbs. (4.00 kN) when used in pairs •Safety Factor of 5 •5/8” (15.9) Max. Flange Thickness •For use with channel 15/8” (41.3) in height •Setscrew included •Sold in pieces. •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 105 Lbs. (47.6 kg) BEAM CLAMP BEAM CLAMP (79.4) 23/8” (60.3) 1” (25.4) 33/8” (85.7) 13/4” 5” 1” (44.4) 1/4” (6.3) (127.0) (25.4) 1/4” (6.3) 1/4” (6.3) B441Z-22 B441Z-22A •Design Load 1200 Lbs. (5.34 kN) when used in series •Safety Factor of 5 •Sold in pieces •For use with 13/16” (20.6) to 15/8” (41.3) high channel •Recommended Torque: 150 in-lbs. (16.9 N•m) •Standard finishes: ZN •Wt./C 95 Lbs. (43.1 kg) •Design Load 1200 Lbs. (5.34 kN) when used in series •Safety Factor of 5 •Sold in pieces •For use with 15/8” (41.3) to 31/4” (82.5) high channel •Recommended Torque: 150 in-lbs. (16.9 N•m) •Standard finishes: ZN •Wt./C 101 Lbs. (45.8 kg) BEAM CLAMP BEAM CLAMP 1” 1” (25.4) (25.4) 31/8” 31/8” (79.4) (79.4) 1/4” (6.3) 45/8” (117.5) 45/8” (117.5) 1/4” (6.3) 23/4” (69.9) 43/8” (111.1) Reference page 98 for general fitting and standard finish specifications. 105 37/16” (87.3) 13/4” (44.4) Beam Clamps 31/8” 23/8” (60.3) 31/8” (79.4) BEAM CLAMP Beam Clamps B211 B213 •Design Load 600 Lbs. (2.67 kN) when used in pairs •Safety Factor of 5 •1” (25.4) Max. Flange Thickness •1/2”-13 Setscrew included •Sold in pieces •Order 1/2”-13 HHCS and Channel Nut separately •Standard finishes: ZN, HDG •Wt./C 66 Lbs. (29.9 kg) •Design Load 900 Lbs. (4.00 kN) when used in pairs •Safety Factor of 5 •7/8” (22.2) Max. Flange Thickness •1/2”-13 Setscrew included •Sold in pieces •Order 1/2”-13 x 21/4” HHCS and Channel Nut separately •Material: Malleable iron •Standard finishes: ZN, GRN •Wt./C 95 Lbs. (43.1 kg) Beam Clamps ZEE BEAM CLAMP I-BEAM CLAMP 11/2” (38.1) 11/2” 3/8” (38.1) (9.5) 31/4” (82.5) 21/2” (63.5) B355 B212-1/4 •Design Load 1200 Lbs. (5.34 kN) when used in pairs •Safety Factor of 5 •5/8” (15.9) Max. Flange Thickness •Sold in pieces •Order 1/2”-13 x 11/2” HHCS and Channel Nut separately •Standard finishes: ZN, GRN, HDG, SS4 •Wt./C 30 Lbs. (13.6 kg) •Design Load 600 Lbs. (2.67 kN) when used in pairs •Safety Factor of 5 •7/8” (22.2) Max. Flange Thickness •3/8”-16 Setscrew included •Sold in pieces •Standard finish: ZN •Wt./C 41 Lbs. (18.6 kg) BEAM CLAMP I-BEAM CLAMP 15/8” 7/8” (22.2) (41.3) I.D. 1/4” THICK (6.3) 5/8” (15.9) 127/32” 2” (46.8) (50.8) 1/4” 11/4” (6.3) (31.7) B212-3/8 B435 •Design Load 1000 Lbs. (4.45 kN) when used in pairs •Safety Factor of 5 •11/8” (28.6) Max. Flange Thickness •1/2”-13 Setscrew included •Sold in pieces •Standard finishes: ZN, HDG •Wt./C 62 Lbs. (28.1 kg) •Design Load 900 Lbs. (4.00 kN) when used in pairs •Safety Factor of 5 •21/8” (54.0) Max. Flange Thickness •1/2”-13 x 2” Setscrew included •Sold in pieces •Standard finish: ZN •Wt./C 82 Lbs. (37.2 kg) BEAM CLAMP I-BEAM CLAMP 11/4” (31.7) 3/8” (9.5) I.D. 3/8” THICK 11/4” (31.7) (9.5) 27/8” (73.0) 2” (50.8) 2” 11/4” (50.8) (31.7) Reference page 98 for general fitting and standard finish specifications. 106 Beam Clamps B405 •Design Load 1100 Lbs. (4.89 kN) when used in pairs •Safety Factor of 5 •21/2” (63.5) Max. Flange Thickness without channel •1/2”-13 x 11/2” Setscrew included •Sold in pieces •Standard finish: ZN •Wt./C 92 Lbs. (41.7 kg) •Standard finishes: ZN, GRN •Wt./C 75 Lbs. (34.0 kg) BEAM CLAMP B405A SUSPENSION MEMBER WITH BEAM CLAMP SUSPENSION MEMBER 37/8” (87.3) O.D. 1/4” (6.3) •7/8” (22.2) Max. Flange Thickness •Includes: 1 pc. B405 Suspension Member 1 pc. B213 I-Beam Clamp 1 pc. 1/2”-13 x 21/2” HHCS 1 pc. 1/2”-13 Hex Nut •Material: Malleable iron •Standard finishes: ZN, GRN •Wt./C 183 Lbs. (83.0 kg) 111/16” (42.9) I.D. 10° 37/16” 2 HOLES 9/16” (14.3) DIA. 27/8” (73.0) 2” 3/8” (9.5) 11/2” (38.1) (50.8) (87.3) 111/16” 17/8” 17/8” (47.6) O.D. (47.6) B318 THRU B320 BEAM CLAMP ASSEMBLY •Safety Factor of 5 •7/8” (22.2) Max. Flange Thickness •Includes: 1 pc. B333 Slotted U-Support 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts •Material: Malleable iron •Standard finishes: ZN, GRN Part No. B318 B319 B320 A 71/4” 81/2” 103/8” (184.1) (215.9) (263.5) 1/4” (6.3) 15/8” (41.3) B A For Flange Width B 23/8”-41/2” (60.3-114.3) 33/4”-53/4” (95.2-146.0) 55/8”-75/8” (142.9-193.7) Design Load Lbs. kN 1200 (5.34) 800 (3.56) 560 (2.49) Wt./C Lbs. kg 325 (147.4) 340 (154.2) 357 (161.9) B602A THRU B602C BEAM CLAMP WITH GUSSET ASSEMBLY •Safety Factor of 5 •7/8” (22.2) Max. Flange Thickness •Includes: 1 pc. B451 Slotted Three Hole U Support with Gusset 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts •Material: Malleable iron •Standard finishes: ZN, GRN Part No. B602A B602B B602C A 71/4” 81/2” 103/8” (184.1) (215.9) (263.5) For Flange Width B 23/8”-41/2” (60.3-114.3) 33/4”-53/4” (95.2-146.0) 55/8”-75/8” (142.9-193.7) 1/4” (6.3) 13/4” B A Design Load Lbs. kN 1200 (5.34) 1200 (5.34) 1200 (5.34) Wt./C Lbs. kg 365 (165.1) 383 (173.7) 408 (185.0) Reference page 98 for general fitting and standard finish specifications. 107 (44.4) (42.9) Beam Clamps B427 Beam Clamps B760-22 SERIES B760-22A SERIES Beam Clamps BEAM CLAMP BEAM CLAMP •1” (25.4) Max. Flange Thickness •For use with 13/16” (20.6) to 15/8” (41.3) high channel •Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) J-Hook Nut 60 in-lbs. (6.8 N•m) 33/8” (85.7) •Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-33/8” U-Bolt only 3 pcs. 3/8”-16 Hex Nuts •Standard finish: ZN •1” (25.4) Max. Flange Thickness •For use with 15/8” (41.3) to 31/4” (82.5) high channel •Recommended Torques: 5” U-Bolt Nuts 150 in-lbs. (16.9 N•m) (127.0) J-Hook Nut 60 in-lbs. (6.8 N•m) •Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-5” U-Bolt only 3 pcs. 3/8”-16 Hex Nuts •Standard finish: ZN 1/4” (6.3) 1/4” (6.3) Part No. B760-22-J4 B760-22-J6 B760-22-J9 B760-22-J12 31/8” (79.4) (79.4) 3/8” (9.5) DIA. 3/8” (9.5) DIA. J-HOOK AND HEX NUT J-HOOK AND HEX NUT Wt./C Lbs. kg For Flange Width 4”-57/8” 6”-87/8” 9”-117/8” 12”-147/8” 31/8” (101.6-149.2) (152.4-225.4) (228.6-301.6) (304.8-377.8) 122 129 135 141 Part No. 4”-57/8” B760-22A-J4 B760-22A-J6 6”-87/8” B760-22A-J9 9”-117/8” B760-22A-J12 12”-147/8” (55.3) (58.5) (61.2) (63.9) (152.4-225.4) (228.6-301.6) (304.8-377.8) B761-22A SERIES •1” (25.4) Max. Flange Thickness •For use with 13/16” (20.6) to 15/8” (41.3) high channel •Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) •Includes: 2 pcs. B700 Plates 33/8” (85.7) 2 pcs. B500-33/8” U-Bolts only 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts •Standard finish: ZN •1” (25.4) Max. Flange Thickness •For use with 15/8” (41.3) to 31/4” (82.5) high channel •Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) •Includes: 2 pcs. B700 Plates 2 pcs. B500-5” U-Bolts only 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts 1 /4” •Standard finish: ZN (6.3) 31/8” (61.7) (64.4) (67.1) 4”-57/8” (101.6-149.2) 6”-87/8” (152.4-225.4) 9”-117/8” (228.6-301.6) 12”-147/8” (304.8-377.8) ATR Length 4” 6” 9” 12” Wt./C Lbs. kg 202 (152.4) 206 (228.6) 214 (304.8) 221 (101.6) 3/8”-16 (9.5) ATR (79.4) AND HEX NUTS For Flange Width 5” (127.0) 31/8” 3/8”-16 (9.5) ATR (79.4) B761-22-4 B761-22-6 B761-22-9 B761-22-12 (58.5) BEAM CLAMP 1/4” (6.3) Part No. 129 136 142 148 (101.6-149.2) B761-22 SERIES BEAM CLAMP Wt./C Lbs. kg For Flange Width Part No. B761-22A-4 B761-22A-6 B761-22A-9 B761-22A-12 (91.6) (93.4) (97.0) (100.2) For Flange Width 4”-57/8” (101.6-149.2) 6”-87/8” (152.4-225.4) 9”-117/8” (228.6-301.6) 12”-147/8” (304.8-377.8) Reference page 98 for general fitting and standard finish specifications. 108 AND HEX NUTS ATR Length 4” 6” 9” 12” Wt./C Lbs. kg 216 220 (228.6) 228 (304.8) 235 (101.6) (152.4) (98.0) (99.8) (103.4) (106.6) Beam Clamps B614 B613 B613A •Quick installation (one bolt to tighten) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B22 and B24 Channel •Sold in pairs •Standard finish: ZN •Wt./C 50 Lbs. (22.6 kg) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B22 and B24 Channel •Setscrews to be torqued to 19 ft./Lbs •Sold in pairs •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) •Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 •Use with B52 and B54 Channel •Setscrews to be torqued to 19 ft./Lbs •Sold in pairs •Standard finishes: ZN, GRN, HDG •Wt./C 100 Lbs. (45.3 kg) COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B52 15/8” (41.3) (41.3) 31/2” 31/2” (88.9) (88.9) 3/8” x 2” CONE 3/8” x 2” CONE POINT SETSCREWS POINT SETSCREWS B422 SERIES RIGHT ANGLE CLAMP •Safety Factor of 5 •Material: 7 Gauge (4.5) •Standard finishes: ZN, SS4 Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4 Conduit Size 1/2” 3/4” 1” 11/4” 11/2” 2 21/2” 3” 31/2” 4” A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4) Design Load Vertical Pull Lbs. kg Wt./C Lbs. kg 250 300 400 400 500 600 700 800 900 1000 38 39 48 50 59 75 98 111 123 135 (1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45) (17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2) A U-BOLT AND HEX NUTS Design Load Vertical Pull B107S B593 •Material: 7 Gauge (4.5) •Standard finishes: ZN, GRN •Wt./C 51 Lbs. (23.1 kg) •Includes: 1 pc. 3/8”-16 x 2” HHCS 1 pc. 3/8”-16 Hex Nut •Material: 11 Gauge (3.0) •Standard finishes: ZN, GRN •Wt./C 31 Lbs. (14.0 kg) U-SUPPORT CLEVIS SWIVEL 33/4” (95.2) 1” (25.4) 13/4” O.D. (44.4) 13/8” 17/16” (34.9) 7/16” (11.1) DIA. 4 HOLES 9/16” (14.3) DIA. (36.5) •Illustration shows B107S and B593 used together •Design Load 900 Lbs., strength of assembly only •Verify anchorage 21/2” (63.5) 11/4” (31.7) Reference page 98 for general fitting and standard finish specifications. 109 9/16” (14.3) DIA. Beam Clamps 15/8” NEW Pipe/Conduit Clamps & Hangers B-Line’s beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with B-Line channels and offer many installation advantages. Materials & Finishes* Pipe/Conduit Clamps & Hangers Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code PLN Finish Plain ZN GRN DCU HDG YZN SS4 SS6 AL Electro-Plated Zinc Dura-Green Dura-Copper Hot-Dipped Galvanized Yellow Zinc Chromate Stainless Steel Type 304 Stainless Steel Type 316 Aluminum Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC3 Type III ASTM A123 ASTM B633 SC3 Type II ASTM A240 ASTM A240 ASTM B209 *Unless otherwise noted. Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load). Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm 1/4”-20 3/8”-16 1/2”-13 4 5 5 7 11 15 Setscrew Size Foot/Lbs. Nm 5/8”-11 3/4”-10 21 28 34 46 *See chart on page 58 for bolt torque. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 110 Pipe Clamps B2207 THRU B2213 MULTI-GRIP PIPE CLAMPS FOR THINWALL (EMT), I.M.C., RIGID CONDUIT OR PIPE Design Load 1 •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Includes Combination Recess Hex Head Machine Screw and Square Nut •Material: ASTM A1011 33,000 PSI min. yield •Standard finish: ZN Design Load 3 Design Load 2 Nominal Size Material Thickness O.D. Size Range B2207 38 / ” (10) 16 Ga. (1.5) .557-.706 (14.2-17.9) B2208 1/2” (15) 16 Ga. (1.5) .701-.875 (17.8-22.2) B2209 3/4” (20) 14 Ga. (1.9) .917-1.081 (23.2-27.4) B2210 1” (25) 14 Ga. (1.9) 1.125-1.375 (28.6-34.9) B2211 11/4” (32) 14 Ga. (1.9) 1.500-1.691 (38.1-42.9) B2212 11/2” (40) 12 Ga. (2.6) 1.735-1.931 (44.0-49.0) B2213 2” (50) 12 Ga. (2.6) 2.192-2.400 (55.7-60.9) Alternate For Design Load 1 Design Load 2 Design Load 3 Clamp No.’s Lbs. kN Lbs. kg Lbs. kg B2000, B2007, 400 (1.78) 50 (.22) 50 (.22) B2026 B2001, B2008, 400 (1.78) 50 (.22) 50 (.22) B2027, B2028 B2002, B2009, 400 (1.78) 50 (.22) 50 (.22) B2029 B2003, B2010, 400 (1.78) 50 (.22) 50 (.22) B2030, B2031, B2032 B2004, B2011, 400 (1.78) 50 (.22) 50 (.22) B2033, B2034 B2005, B2012, 600 (2.67) 75 (.33) 75 (.33) B2035, B2036 B2006, B2013 75 (.33) 75 (.33) 600 (2.67) B2039 BPC-8 THRU BPC-64 BREAK-APART CONDUIT CLAMP •Design Load 200 Lbs. (.896 kN) •Includes Combination Recess Hex Head Machine Screw •Material: ASTM A1011 33,000 PSI min. yield •Standard finish: ZN Part No. BPC-8 BPC-12 BPC-16 BPC-20 BPC-24 BPC-32 BPC-40 BPC-48 BPC-56 BPC-64 A Rigid or EMT Conduit Size 1/2” (21.3) 3/4” (26.7) 1” (33.4) 11/4” (42.2) 11/2” (48.3) 2” (60.3) 21/2” (73.0) 3” (88.9) 31/2” (101.6) 4” (114.3) Wt./C Lbs. 11.2 12.7 14.5 16.5 18.5 21.5 21.5 22.0 23.0 27.5 kg (5.1) (5.8) (6.6) (7.5) (8.4) (9.8) (9.8) (10.0) (10.4) (12.5) A Design Load Reference page 110 for general fitting and standard finish specifications. 111 Wt./C Lbs. kg 9 (4.1) 11 (5.0) 12 (5.4) 13 (5.9) 15 (6.8) 23 (10.4) 26 (11.8) Pipe/Conduit Clamps & Hangers Part No. Pipe Clamps B2000 SERIES PIPE AND CONDUIT CLAMPS •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Includes Combination Recess Hex Head Machine Screw and Square Nut •Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 •Standard finishes: ZN, HDG, SS4, SS6, AL Design Load 1 Note: For EMT sizes 21/2” and larger use rigid conduit sizes. Design Load 2 Pipe/Conduit Clamps & Hangers Design Load 3 THINWALL CONDUIT (EMT) CLAMPS Part No. B2000 B2001 B2002 B2003 B2004 B2005 B2006 Conduit Size 3/8” (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” (25) (32) (40) (50) Material Thickness 16 Ga. 16 Ga. 16 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. (1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) Design Load 1 Lbs. kN Design Load 2 Lbs. kg 400 400 400 600 600 800 800 50 50 50 75 75 125 125 (1.78) (1.78) (1.78) (2.67) (2.67) (3.56) (3.56) (.22) (.22) (.22) (.33) (.33) (.56) (.56) Design Load 3 Lbs. kg 50 50 50 75 75 125 125 (.22) (.22) (.22) (.33) (.33) (.56) (.56) Wt./C Lbs. kg 10 10 11 16 19 28 33 (4.5) (4.5) (5.0) (7.2) (8.6) (12.7) (14.9) RIGID CONDUIT OR PIPE CLAMPS Part No. B2001 B2008 B2009 B2010 B2011 B2012 B2013 B2014 B2015 B2016 B2017 B2018 B2019 B2020 B2021 B2022 B2130 B2132 Conduit Size 3/8” (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 41/2” 5” 6” 7” 8” 10 12” (25) (32) (40) (50) (65) (80) (90) (100) (115) (125) (150) (175) (200) (254) (305) Material Thickness 16 Ga. 16 Ga. 14 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. (1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) Design Load 1 Lbs. kN 400 400 600 600 600 800 800 800 800 1000 1000 1000 1000 1000 1000 1000 1000 1000 (1.78) (1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) Design Load 2 Lbs. kg 50 50 75 75 75 125 125 125 125 200 200 200 200 200 250 250 250 250 (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11) Design Load 3 Lbs. kg 50 50 75 75 75 125 125 125 125 150 150 150 150 150 200 200 200 200 (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89) Wt./C Lbs. kg 10 11 15 16 20 30 34 38 44 61 66 70 77 100 115 128 160 185 Reference page 110 for general fitting and standard finish specifications. 112 (4.5) (5.0) (6.8) (7.2) (9.1) (13.6) (15.4) (17.2) (19.9) (27.6) (29.9) (31.7) (34.9) (45.3) (52.1) (58.0) (72.6) (83.9) Pipe Clamps B2000 SERIES Design Load 1 PVC CLAMPS •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Includes Combination Recess Hex Head Machine Screw and Square Nut •Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 •Standard finishes: PVC CLAMP SIZING CHART FOR PVC COATED RIGID CONDUIT AND CLAMPS 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) .020 (.51mm) 0 .020 (.51mm) B2002 B2030 B2032 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 B2002 B2030 B2032 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 B2029 B2004 B2004 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 CLAMP SIZING CHART FOR PVC COATED THINWALL (EMT) CONDUIT AND CLAMPS Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating Nominal Conduit 0 .020 (.51mm) 0 .020 (.51mm) B2026 B2027 B2029 B2003 B2004 B2005 B2039 B2026 B2027 B2029 B2031 B2011 B2005 B2039 B2026 B2027 B2029 B2031 B2011 B2005 B2039 B2001 B2008 B2009 B2031 B2011 B2036 B2013 Size 3/8” 1/2” 3/4” 1” 11/4” 11/2” 2” (10) (15) (20) (25) (32) (40) (50) *See B2000 O.D. pipe and conduit clamp chart on pgs. 112-113 for corresponding clamp load data. *See B2000 O.D. pipe and conduit clamp chart on pgs. 112-113 for corresponding clamp load data. B2000 SERIES Design Load 1 COPPER TUBING CLAMPS •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Includes Combination Recess Hex Head Machine Screw and Square Nut •Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 •Standard finish: Exclusive Dura-Copper® Finish (DCU) Design Load 2 Design Load 3 COPPER TUBING CLAMPS Part No. Tubing Size B2024DCU B2025DCU B2026DCU B2027DCU B2008DCU B2030DCU B2032DCU B2011DCU B2038DCU B2042DCU B2046DCU B2050DCU B2054DCU B2062DCU B2110DCU B2126DCU 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1 1 /4” 11/2” 2 21/2” 3 31/2” 4 5 6 8 O.D. Size In. (mm) .375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125 (9.5) (12.7) (15.9) (19.0) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4) Material Thickness 16 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. 14 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. (1.5) (1.5) (1.5) (1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0) Design Load 1 Lbs. kN 400 400 400 400 400 600 600 600 800 800 800 1000 1000 1000 1000 1000 (1.78) (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45) Design Load 2 Lbs. kg 50 50 50 50 50 75 75 75 125 125 125 200 200 200 250 250 (.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.89) (.89) (.89) (1.11) (1.11) Design Load 3 Lbs. kg 50 50 50 50 50 75 75 75 125 125 125 150 150 150 200 200 (.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.67) (.67) (.67) (.89) (.89) Reference page 110 for general fitting and standard finish specifications. 113 Wt./C Lbs. kg 8 9 10 10 11 15 17 19 32 35 39 54 61 70 94 123 (3.6) (4.1) (4.5) (4.5) (5.0) (6.8) (7.7) (8.6) (14.5) (15.9) (17.7) (24.5) (27.6) (31.7) (42.6) (55.8) Pipe/Conduit Clamps & Hangers 0 B2008 B2030 B2032 B2005 B2012 B2013 B2014 B2015 B2016 B2017 B2019 B2020 Size 3/4” Design Load 3 Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating Nominal Conduit 1/2” Design Load 2 Pipe Clamps B2000 SERIES Design Load 1 O.D. PIPE AND CONDUIT CLAMPS •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Other sizes available upon request •Includes Combination Recess Hex Head Machine Screw and Square Nut. •Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 •Standard finishes: ZN, HDG, SS4 O.D. O.D. Design Load 2 Design Load 3 O.D. CLAMPS Pipe/Conduit Clamps & Hangers Part No. O.D. Size (in.) Hardware Size Material Design Load 1 Gauge Thickness Lbs. kN Design Load 2 Lbs. kN Design Load 3 Lbs. kN Wt./C Lbs. kg B2023 1/4” (6.3) 1/4”-20 16 (1.5) 120 (.54) 30 (.13) 30 (.13) 8 (3.6) B2024 3/8” (9.5) 1/4”-20 16 (1.5) 300 (1.33) 40 (.18) 40 (.18) 8 (3.6) B2025 1/2” (12.7) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 9 (4.1) B2026 5/8” (15.9) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5) B2027 3/4” (19.0) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5) B2028 7/8” (22.2) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 11 (5.0) B2029 1” (25.4) 1/4”-20 14 (1.9) 500 (2.22) 75 (.33) 75 (.33) 15 (6.8) B2030 11/8” (28.6) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 15 (6.8) B2031 11/4” (31.7) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 16 (7.3) B2032 13/8” (34.9) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 17 (7.7) B2004 11/2” (38.1) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 18 (8.2) B2011 15/8” (41.3) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 19 (8.6) B2005 13/4” (44.4) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 29 (13.1) B2036 17/8” (47.6) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 30 (13.6) B2037 2 (50.8) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 30 (13.6) B2038 21/8” (54.0) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 32 (14.5) B2039 21/4” (57.1) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 32 (14.5) B2013 23/8” (60.3) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 34 (15.4) B2041 21/2” (63.5) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 35 (15.9) B2042 25/8” (66.7) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 35 (15.9) B2043 23/4” (69.8) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2) B2014 27/8” (73.0) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2) B2045 3 (76.2) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2) B2046 31/8” (79.4) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 39 (17.7) B2047 31/4” (82.5) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 41 (18.6) B2048 33/8” (85.7) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 43 (19.5) B2015 31/2” (88.9) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 44 (20.0) B2050 35/8” (92.1) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 54 (24.5) B2051 33/4” (95.2) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 57 (25.8) B2052 37/8” (41.3) 5/16”-18 11 (3.0) 1000 (4.45 200 (.89) 150 (.67) 55 (25.0) B2016 4 (101.6) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 57 (25.8) B2054 41/8” (104.8) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 61 (27.7) B2055 41/4” (107.9) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 62 (28.1) B2056 43/8” (111.1) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 64 (29.0) B2017 41/2” (114.3) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 66 (29.9) B2058 45/8” (117.5) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 66 (29.9) Reference page 110 for general fitting and standard finish specifications. 114 Pipe Clamps B2000 SERIES O.D. PIPE AND CONDUIT CLAMPS •Safety Factor of 5 •Add PA to suffix for pre-assembled pipe clamps •Other sizes available upon request •Includes Combination Recess Hex Head Machine Screw and Square Nut. •Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 Design Load 1 •Standard finishes: ZN, HDG, SS4 O.D. O.D. Design Load 2 O.D. CLAMPS Part No. O.D. Size (in.) Hardware Size Material Design Load 1 Gauge Thickness Lbs. kN Design Load 2 Lbs. kN Design Load 3 Lbs. kN Wt./C Lbs. kg B2059 43/4” (120.6) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 68 (30.8) B2060 B2018 B2062 B2063 B2064 B2019 B2066 B2067 B2068 B2069 B2110 B2111 B2112 B2113 B2020 B2115 B2116 B2117 B2118 B2119 B2120 B2121 B2021 B2123 B2124 B2125 B2126 B2127 B2128 B2129 B2022 B2130 B2132 47/8” (123.8) 5/16”-18 (133.3) 5/16”-18 (136.5) 5/16”-18 (139.7) 5/16”-18 (142.9) 5/16”-18 (146.0) 5/16”-18 (149.2) 5/16”-18 (152.4) 5/16”-18 (155.6) 3/8”-16 (158.7) 3/8”-16 (161.9) 3/8”-16 (165.1) 3/8”-16 (168.3) 3/8”-16 (171.4) 3/8”-16 (174.6) 3/8”-16 (177.8) 3/8”-16 (181.0) 3/8”-16 (184.1) 3/8”-16 (187.3) 3/8”-16 (190.5) 3/8”-16 (193.7) 3/8”-16 (196.8) 3/8”-16 (200.0) 3/8”-16 (203.2) 3/8”-16 (206.4) 3/8”-16 (209.5) 3/8”-16 (212.7) 3/8”-16 (215.9) 3/8”-16 (219.1) 3/8”-16 (273.0) 3/8”-16 (323.8) 3/8”-16 69 70 70 70 77 78 83 84 85 87 94 96 98 99 100 102 104 106 108 110 112 114 115 117 119 121 123 125 126 128 128 160 185 (31.3) 5/16”-18 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 (.67) (130.2) 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 (.89) 5/16”-18 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 (4.45) (127.0) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 (3.0) 5 51/8” 51/4” 53/8” 51/2” 55/8” 53/4” 57/8” 6” 61/8” 61/4” 63/8” 61/2” 65/8” 63/4” 67/8” 7” 71/8” 71/4” 73/8” 71/2” 75/8” 73/4” 77/8” 8” 81/8” 81/4” 83/8” 81/2” 85/8” 103/4” 123/4” (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) Reference page 110 for general fitting and standard finish specifications. 115 (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (31.8) (31.8) (31.8) (34.9) (35.4) (37.6) (38.1) (38.6) (39.5) (42.6) (43.5) (44.4) (44.9) (45.4) (46.3) (47.2) (48.1) (49.0) (49.9) (50.8) (51.7) (52.2) (53.1) (54.0) (54.9) (55.8) (56.7) (57.2) (58.1) (58.1) (72.6) (83.9) Pipe/Conduit Clamps & Hangers Design Load 3 Pipe Clamps B1508 THRU B1564S Design Load CONDUIT/STRUT CLAMPS •Safety Factor of 3 •Clamps without saddles are not recommended for flexible conduit or cable •All Sizes Include: 1/4”-20 Slotted Hex Head Machine Screw •Standard finish: ZN SETSCREW Pipe/Conduit Clamps & Hangers THICKNESS B1508S THRU B1524S B1508 THRU B1520 B1532S THRU B1564S Part No. B1508 B1512 B1516 B1520 B1508S B1512S B1516S B1520S B1524S B1532S B1534S B1540S B1548S B1556S B1564S EMT 1/2” 3/4” 1” 11/4” 1/2” 3/4” 1” 1 1 /4” 11/2” 2” – 21/2” 3” 31/2” 4” Use With Rigid Conduit (15) (20) (25) (32) (15) (20) (25) (32) (40) (50) – (65) (80) (90) (100) – – 1/2” (15) 3/4” (20) 1” – 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” (25) – (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) Thickness 16 Ga. 16 Ga. 14 Ga. 14 Ga. 16 Ga. 16 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. (1.5) (1.5) (1.9) (1.9) (1.5) (1.5) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6) Design Load Lbs. kN Wt./C Lbs. 200 200 300 300 200 200 300 300 400 400 400 400 400 400 400 7.4 8.0 11.0 12.5 8.6 9.2 12.7 14.6 20.5 21.5 22.7 26.0 30.2 33.3 36.6 (.89) (.89) (1.33) (1.33) (.89) (.89) (1.33) (1.33) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78) Reference page 110 for general fitting and standard finish specifications. 116 kg (3.4) (3.6) (5.0) (5.7) (3.9) (4.2) (5.8) (6.6) (9.3) (9.8) (10.3) (11.9) (13.7) (15.1) (16.6) Pipe Clamps B2601 THRU B2610 TWIST EAR® PIPE CLAMP •One piece break apart, screw retainer, thread impressions •Tighter alignment, no need to leave additional space between clamps in order to access nut and bolt •Easier access bolt can be tightened directly from front •Available in 1/2”, 3/4”, 1” rigid and EMT Conduit •Recommended Torque 30 in. - lbs. •Safety Factor of 3 •Standard finish: ZN Design Load B-Line B26093/4 3/4" ST D B-Line B26093/4 3/4" ST D B-Line B26093/4 3/4" ST D Allows for multiple clamps to be used in succession, with easier access than other pipe clamps. Part No. B2601 B2602 B2603 B2608 B2609 B2610 EMT Use With Rigid Conduit Thickness – – – 1/2” 3/4” 1” 16 Ga. 14 Ga. 14 Ga. 16 Ga. 14 Ga. 14 Ga. 1/2” (17.9) 3/4” (23.4) 1” – – – (29.5) – – – – – – (21.3) (26.7) (33.4) No loose pieces. One piece break apart with screw retainer and thread impressions. Break-apart - break in the middle, bolt the ends together. Design Load Lbs. kN Wt./C Lbs. 300 500 500 300 500 500 8.2 13.5 15.6 8.2 13.5 15.6 (1.34) (2.24) (2.24) (1.34) (2.24) (2.24) BP081SS THRU BP475SS kg (3.7) (6.1) (7.1) (3.7) (6.1) (7.1) Design Load P CLAMPS •Minimizes induction heating •Material: Stainless Steel Type 304 SETSCREW W O.D. SIZE NEW H 14 GAUGE Part No. In. O.D. Size mm BP081SS .250-.840 (6.4-21.3) BP110SS .810-1.100 (20.6-28.0) BP135SS .850-1.350 (21.6-34.8) BP175SS 1.250-1.750 (31.8-44.4) BP205SS 1.550-2.050 (39.4-52.1) BP250SS 2.00-2.50 (50.8-63.5) BP300SS 2.55-3.00 (64.7-76.2) BP325SS 2.75-3.25 (69.9-82.8) BP375SS 3.25-3.75 (82.6-95.3) BP425SS 3.75-4.25 (95.3-108.0) BP475SS 4.25-4.75 (108.0-120.7) Height H In. mm Width W In. mm 1.86 2.18 2.25 2.78 3.00 3.43 3.87 4.06 4.60 5.13 5.70 0.87 1.19 1.38 1.78 2.28 2.83 3.15 3.28 3.83 4.50 4.85 (47.2) (55.4) (57.2) (70.6) (76.2) (87.1) (97.8) (103.1) (116.8) (130.3) (5.70) (22.1) (30.2) (35.1) (45.2) (57.9) (71.9) (80.0) (83.3) (97.3) (114.3) (123.2) Design Load Lbs. kN 300 300 300 300 300 300 300 300 300 300 300 (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) Wt/C. Lbs. kg 9.0 12.0 14.0 21.0 30.0 35.0 39.0 41.0 47.0 54.0 58.0 Reference page 110 for general fitting and standard finish specifications. 117 (4.1) (5.4) (6.3) (9.5) (13.6) (15.9) (17.7) (18.6) (21.3) (24.4) (26.3) Pipe/Conduit Clamps & Hangers B-Line B26093/4 3/4" STD VibraClamp® Pipe Clamps Design Load 1 BVT SERIES VIBRACLAMPS-COPPER & O.D. •Safety Factor of 3 •Accesses tubing sizes 1/8” (3) to 6” (150) •Allows easy one tool installation •Endures both high (+300°F) and low (-40°F) temperatures •Dampens vibration and noise •Eliminates galvanic metal to metal contact •Resists most industrial oils and solvents •Reduces thermal loss and gain •Secures tubing firmly to channel (strut) •Dielectric strength of 400 volts/mil •Includes cushion, clamp, screw and nut •Standard finishes: YZN, SS4 Pipe/Conduit Clamps & Hangers Catalog Number BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612 Catalog Number BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612 Tubing O.D. Size 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 11/8” 11/4” 13/8” 11/2” 15/8” 13/4” 17/8” 2” 21/8” 21/4” 21/2” 25/8” 3” 31/8” 35/8” 41/8” 61/8” (6.3) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) (63.5) (66.6) (76.2) (79.4) (92.1) (104.8) (155.5) Design Load 1 Lbs. 400 400 400 400 600 600 600 600 600 600 600 800 800 800 800 800 800 800 800 800 800 1000 1000 1000 kN (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) Design Load 2 A B C Copper Tubing Size 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” – 1” – 11/4” – 11/2” – – – 2” – – 21/2” – 3” 31/2” 4” 6” (3) (6) (10) (15) (17) (20) – (25) – (32) – (40) – – – (50) – – (65) – (80) (90) (100) (150) Design Load 2 Lbs. 50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 200 200 200 kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89) Design Load 3 Dimensions B A 1.22 1.36 1.49 1.62 1.87 2.00 2.25 2.25 2.51 2.51 2.74 3.00 3.13 3.28 3.52 3.52 3.64 3.91 4.02 4.42 4.53 5.05 5.55 7.62 (30.9) (34.5) (37.8) (41.1) (47.4) (50.8) (57.1) (57.1) (63.7) (63.7) (69.6) (76.2) (79.5) (83.3) (89.4) (89.4) (92.4) (99.3) (102.1) (112.2) (115.0) (128.2) (140.9) (193.5) 0.19 0.25 0.31 0.38 0.50 0.56 0.69 0.69 0.81 0.81 0.88 1.00 1.06 1.13 1.25 1.25 1.31 1.43 1.50 1.68 1.75 2.00 2.25 3.25 (4.8) (6.3) (7.8) (9.6) (12.7) (14.2) (17.5) (17.5) (20.6) (20.6) (22.4) (25.4) (26.9) (28.7) (31.7) (31.7) (33.2) (36.3) (38.1) (42.6) (44.4) (50.8) (57.1) (82.5) C 0.49 (12.4) 0.61 (15.5) 0.74 (18.8) 0.86 (21.8) 1.15 (29.2) 1.27 (32.2) 1.52 (38.6) 1.52 (38.6) 1.78 (45.2) 1.78 (45.2) 1.96 (49.8) 2.20 (55.9) 2.33 (59.1) 2.46 (62.5) 2.70 (68.6) 2.70 (68.6) 2.83 (71.8) 3.11 (79.0) 3.20 (81.3) 3.61 (91.6) 3.70 (93.9) 4.23 (107.4) 4.73 (120.1) 6.74 (171.1) Wt./C Lbs. kg 11 12 14 15 19 21 22 26 36 38 35 40 44 40 55 55 54 56 55 67 64 76 93 136 (5.0) (5.4) (6.3) (6.8) (8.6) (9.5) (10.0) (11.8) (16.3) (17.2) (15.9) (18.1) (19.9) (18.1) (25.0) (25.0) (24.5) (25.4) (25.0) (30.4) (29.0) (34.5) (42.2) (61.6) Design Load 3 Lbs. 50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 150 150 150 kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67) 118 Reference page 110 for general fitting and standard finish specifications. VibraClamp® Pipe Clamps BVP SERIES VIBRACLAMPS-IRON PIPE & RIGID CONDUIT •Safety Factor of 3 •Accesses pipe sizes 1/4” (6) to 6” (150) •Allows easy one tool installation •Endures both high (+300°F) and low (-40°F) temperatures •Dampens vibration and noise •Eliminates galvanic metal to metal contact •Resists most industrial oils and solvents •Reduces thermal loss and gain •Secures pipe firmly to channel (strut) •Dielectric strength of 400 volts/mil •Includes cushion, clamp, screw and nut •Standard finishes: YZN, SS4 Design Load 1 Design Load 2 A Design Load 3 B C BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 Catalog Number BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 Nominal Pipe Size 1/4” 3/8” 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” Steel O.D. Size 0.540 0.675 0.875 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 (6.3) (9.5) (12.7) (19.0) (25.4) (31.7) (38.1) (50.8) (63.5) (76.2) (88.9) (101.6) (127.0) (152.4) Design Load 1 Lbs. 400 600 600 600 600 800 800 800 800 1000 1000 1000 1000 1000 (13.7) (17.1) (22.2) (26.7) (33.3) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3) Design Load 2 kN (1.78) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45) Lbs. 50 75 75 75 75 125 125 125 125 200 200 200 200 200 kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89) (0.89) (0.89) Dimensions B A 1.61 1.86 1.99 2.25 2.51 3.00 3.21 3.77 4.28 5.05 5.55 6.05 6.84 8.24 (39.9) (47.2) (50.5) (57.1) (63.8) (76.2) (83.1) (95.8) (108.7) (128.3) (140.9) (153.7) (173.7) (209.3) 0.37 0.50 0.56 0.69 0.81 1.00 1.12 1.37 1.62 2.00 2.25 2.50 3.00 3.56 (9.4) (12.7) (14.2) (17.5) (20.6) (25.4) (28.4) (34.8) (41.1) (50.8) (57.1) (63.5) (76.2) (90.4) C 0.87 1.15 1.27 1.52 1.77 2.21 2.41 2.96 3.46 4.24 4.74 5.24 6.24 7.36 (22.1) (29.2) (32.3) (38.6) (45.0) (56.1) (62.3) (75.2) (87.9) (107.7) (120.3) (133.1) (158.4) (186.9) Design Load 3 Lbs. 50 75 75 75 75 125 125 125 125 150 150 150 150 150 kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67) (0.67) (0.67) Reference page 110 for general fitting and standard finish specifications. 119 Wt./C Lbs. kg 15 18 20 21 20 36 40 45 54 81 87 109 136 163 (6.8) (8.2) (9.1) (9.5) (9.1) (16.3) (18.1) (20.4) (24.5) (36.7) (39.4) (49.4) (61.6) (73.8) Pipe/Conduit Clamps & Hangers Catalog Number Armifix Clamps & Accessories IPH SERIES INSERTS - INSERTS WITH CLAMPS • Engineered load-bearing inserts prevents insulation compression • Innovative insulated pipe support • Desirable “Foam-to-Foam” Bond • Slip Data: 45 lbs. (0.20 kN) max • Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) • Service Temperature Range -58°F (-50°C) to +220°F (+105°C) 1/2” Assembly Part No. IPH03812 IPH01212 IPH05812 IPH03412 IPH07812 IPH11812 IPH13812 IPH15812 IPH11012 IPH21812 IPH25812 IPH31812 IPH35812 IPH41812 IPH40012 IPH50012 IPH60012 Pipe/Conduit Clamps & Hangers NEW Insert Only 3/4” Assembly Insert & Clamp Wall Insulation Thickness Assembly Part No. IPH03834 IPH01234 IPH05834 IPH03434 IPH07834 IPH11834 IPH13834 IPH15834 IPH11034 IPH21834 IPH25834 IPH31834 IPH35834 IPH41834 IPH40034 IPH50034 IPH60034 IPH80034 Wall Insulation Thickness Insert Only Pipe/Copper/OD Hanger Part No. Size Size* 3/8” O.D. IPH03834WO 2” 1/2” O.D. 2” IPH01234WO 5/8” O.D. 2” IPH05834WO 3/4” O.D. 2” IPH03434WO 7/8” O.D. 21/2” IPH07834WO 21/2” IPH11834WO 3/4” IPS & 11/8” O.D. 3 3” IPH13834WO 1 /8” O.D. 31/2” IPH15834WO 15/8” O.D. IPH11034WO 11/2” IPS & 17/8” O.D. 31/2” 4” IPH21834WO 21/8” O.D. 5” IPH25834WO 25/8” O.D. 5” IPH31834WO 31/8” O.D. 6” IPH35834WO 35/8” O.D. 6” IPH41834WO 41/8” O.D. IPH40034WO 4” IPS 6” IPH50034WO 5” IPS 8” IPH60034WO 6” IPS 10” IPH80034WO 8” IPS 12” Insert Only Pipe/Copper/OD Hanger Part No. Size Size* 3 IPH03812WO /8” O.D. 11/4” 1/2” O.D. 11/4” IPH01212WO 5/8” O.D. 11/2” IPH05812WO 3/4” O.D. 11/2” IPH03412WO 7/8” O.D. 2” IPH07812WO 2” IPH11812WO 3/4” IPS & 11/8” O.D. 21/2” IPH13812WO 13/8” O.D. 21/2” IPH15812WO 15/8” O.D. 1 7 3” IPH11012WO 1 /2” IPS & 1 /8” O.D. 3” IPH21812WO 21/8” O.D. 31/2” IPH25812WO 25/8” O.D. 4” IPH31812WO 31/8” O.D. 5” IPH35812WO 35/8” O.D. 6” IPH41812WO 41/8” O.D. IPH40012WO 4” IPS 6” IPH50012WO 5” IPS 8” IPH60012WO 6” IPS 8” * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) 1” Wall Insulation Thickness Assembly Part No. IPH05810 IPH03410 IPH07810 IPH11810 IPH13810 IPH15810 IPH11010 IPH21810 IPH25810 IPH31810 IPH35810 IPH41810 IPH40010 IPH50010 IPH60010 IPH80010 * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) IPH18230 ARMACELL® INSUALTION TAPE • 30 ft. (9.14 M) roll Insert Only Pipe/Copper/OD Hanger Part No. Size Size* 5/8” O.D. IPH05810WO 21/2” 3 /4” O.D. 21/2” IPH03410WO 7 /8” O.D. 3” IPH07810WO 3” IPH11810WO 3/4” IPS & 11/8” O.D. 31/2” IPH13810WO 13/8” O.D. 31/2” IPH15810WO 15/8” O.D. 4” IPH11010WO 11/2” IPS & 17/8” O.D. 4” IPH21810WO 21/8” O.D. 5” IPH25810WO 25/8” O.D. 5” IPH31810WO 31/8” O.D. 6” IPH35810WO 35/8” O.D. 6” IPH41810WO 41/8” O.D. IPH40010WO 4” IPS 8” IPH50010WO 5” IPS 8” IPH60010WO 6” IPS 10” IPH80010WO 8” IPS 12” * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) Reference page 110 for general fitting and standard finish specifications. 120 Vibra Cushion® Accessories B1999 FEATURES •Packaged 20 Ft. (6.09 m) per carton •Ideal Isolation Material •Inhibits Galvanic Corrosion •Dampens Sound and Vibrations •Service Temperature Range -75°F (-60°C) to +375°F (+199°C) •Wt./Carton 3.8 Lbs. (1.7 kg) Vibra Cushion® is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energy-absorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75°F (-60°C) to +375°F (+199°C). VIBRA CUSHION® This elastomer allows for expansion and contraction within the mounting system and prevents galvanic reaction between dissimilar metals. FOR RIGID CONDUIT OR IRON PIPE 15/8” (41.3) Nominal Length of Use Size Vibra-Cushion Clamp No. 3/8” (10) 21/8” (54.0) B2002 1/2” (15) 25/8” (66.7) B2009 3/4” (20) 31/4” (82.5) B2031 1” (25) 41/8” (104.8) B2004 11/4” (32) 53/16” (131.8) B2012 11/2” (40) 515/16” (150.8) B2038 2” (50) 71/2” (190.5) B2042 21/2” (65) 9” (228.6) B2046 3” (80) 11” (279.4) B2051 31/2” (90) 121/2” (317.5) B2055 4” (100) 141/2” (368.3) B2059 5” (125) 177/16” (442.9) B2067 6” (150) 203/4” (527.0) B2116 FOR THINWALL (EMT) CONDUIT Nominal Length of Use Size Vibra-Cushion Clamp No. 3/8” (10) 113/16” (46.0) B2027 1/2” (15) 213/16” (58.7) B2002 3/4” (20) 27/8” (73.0) B2003 1” (25) 35/8” (92.1) B2032 11/4” (32) 43/8” (120.6) B2036 11/2” (40) 57/16” (138.1) B2012 2” (50) 67/8” (174.6) B2013 Length of Use Vibra-Cushion Clamp No. 13/16” (30.2) B2026 19/16” (39.7) B2027 17/8” (47.6) B2028 25/16” (58.7) B2029 23/4” (69.8) B2030 31/2” (88.9) B2032 45/16” (109.5) B2011 51/8” (130.2) B2036 611/16” (169.9) B2013 81/4” (209.5) B2014 913/16” (249.2) B2048 113/8” (288.9) B2052 1215/16” (328.6) B2056 161/8” (409.6) B2064 191/4” (488.9) B2112 251/2” (647.7) B2128 BVS Type - Vibra Strip™ for 15/8" (41.3) wide B-Line channel ISO PIPE •Non-adhesive rubber tape •Fuses to itself •Water resistant •Ideal Isolation Material •Prevents galvanic reaction caused by dissimilar metal contact •Temperature Range -140°F (-60°C) to +395°F (+200°C) •Fits securely in 15/8” wide channel •Temperature range: -20°F to 212°F •Ideal Isolation & Vibration Dampening Qualities •45 durometer hardness •Material: Neoprene 1” (25.4) Part No. Thickness In. mm Ft./Roll Ft. m ISO .020 36 (0.5) Nominal Size 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150) 8” (200) Part No. BVS-12 BVS-120 (11) Max. Load Lbs. per Lineal In. Lbs. kg/25.4 mm 40 40 (18.1) (18.1) Length 12” (304.8) 120” (3048.0) Reference page 110 for general fitting and standard finish specifications. 121 Wt. Std. Each Pkg. Lbs. kg 25 25 .46 .46 (.21) (.21) Pipe/Conduit Clamps & Hangers FOR COPPER TUBING TYPE L & K Pipe Clamps Design Load 1 B2400 SERIES STANDARD PIPE STRAP Pipe/Conduit Clamps & Hangers •Safety Factor of 5 •B2400-3/4 thru B2400-8 are UL listed •Order hardware separately •Other sizes available upon request •Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield; 2” - 10”, ASTM A1018 33,000 PSI min. yield; 12” ASTM A1011 CS Type B; 14”-Larger, ASTM A36 •Standard finish: ZN •Ductile Iron Sizes Available •Meets requirements of MSS SP-58 & SP-69 Type 26 Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Pipe Size 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (460) (510) (610) A 5/16” 5/16” 5/16” 5/16” 5/16” 7/16” 7/16” 7/16” 7/16” 9/16” 9/16” 9/16” 9/16” 9/16” 9/16” 15/16” 15/16” 15/16” 15/16” 15/16” PIPE SIZE HOLE SIZE A Design Load 3 B W B (7.9) (7.9) (7.9) (7.9) (7.9) (11.1) (11.1) (11.1) (11.1) (14.3) (14.3) (14.3) (14.3) (14.3) (14.3) (23.8) (23.8) (23.8) (23.8) (23.8) 7/16” 7/16” 7/16” 7/16” 7/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 15/16” 15/16” 11/2” 11/2” 13/4” 13/4” 13/4” T C C 213/16” 3” 317/32” 33/4” 41/16” 521/32” 65/32” 625/32” 79/32” 725/32” 87/8” 915/16” 1131/32” 14” 16” 203/4” 223/4” 27” 29” 33” (11.1) (11.1) (11.1) (11.1) (11.1) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (33.3) (33.3) (38.1) (38.1) (44.4) (44.4) (44.4) T (71.4) (76.2) (89.7) (95.2) (103.2) (143.6) (156.3) (172.2) (184.9) (197.6) (225.4) (252.4) (304.0) (355.6) (406.4) (527.0) (577.8) (685.8) (736.6) (838.2) W 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” (12.7) 1/2” (12.7) 1/2” (12.7) Design Load 1 Lbs. kN Design Load 2 Lbs. kN Design Load 3 Lbs. kN Lbs. 600 600 600 600 600 1200 1200 1200 1200 1500 1500 1500 2000 2000 2000 2000 2000 2000 2000 2000 150 150 150 150 150 480 480 480 480 600 600 600 800 800 800 800 800 800 800 800 105 105 120 120 120 180 180 300 300 450 450 450 600 600 600 600 600 600 600 600 23 26 31 36 39 93 106 132 151 160 192 219 297 465 560 761 861 1297 1426 1682 (2.67) (2.67) (2.67) (2.67) (2.67) (5.34) (5.34) (5.34) (5.34) (6.67) (6.67) (6.67) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (.67) (.67) (.67) (.67) (.67) (2.14) (2.14) (2.14) (2.14) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (.47) (.47) (.53) (.53) (.53) (.80) (.80) (1.33) (1.33) (2.00) (2.00) (2.00) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 13/4” 13/4” 13/4” 13/4” 13/4” Wt./C Reference page 110 for general fitting and standard finish specifications. 122 Design Load 2 kg (10.4) (11.8) (14.0) (16.3) (17.7) (42.2) (48.1) (59.9) (68.5) (72.6) (87.1) (99.3) (134.7) (210.9) (254.0) (345.2) (390.5) (588.3) (646.8) (762.9) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (44.4) (44.4) (44.4) (44.4) (44.4) Pipe Clamps B437 SERIES TWO PIECE PIPE STRAP •Clamp halves can turn allowing pipe to be fastened to channel at any direction •Order hardware separately •Standard finish: ZN Part No. 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” (40) A 5 /16” /16” 5 /16” 5 /16” 5 /16” 7 /16” 7 /16” 7 /16” 7 /16” 9 /16” 9 /16” 9 /16” 9 /16” 5 (50) (65) (80) (90) (100) (125) (150) (200) Wt./C Lbs. kg T (7.9) (7.9) (7.9) (7.9) (7.9) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1) 10 Ga. 10 Ga. 10 Ga. 10 Ga. 10 Ga. 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” (3.4) (3.4) (3.4) (3.4) (3.4) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) 22 26 30 35 38 91 104 130 149 158 190 217 295 (10.0) T (11.8) (13.6) (15.9) HOLE SIZE A (17.2) (41.3) (47.2) (58.9) (67.6) (71.6) (86.2) (98.4) (133.8) B2417 STRUT MOUNTED PIPE GUIDE 14 GAUGE (1.9) •Copper tubing sizes available - B2417CT Series •Standard finish: ZN Part No. B2417-1/2 B2417-3/4 B2417-1 B2417-11/4 B2417-11/2 B2417-2 B2417-21/2 B2417-3 B2417-31/2 B2417-4 Pipe Size 1 /2" /4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 3 Minimum Includes Radial Clearance Clamp No. Lbs. kg B2009 B2010 B2034 B2037 B2039 B2043 B2047 B2016 B2017 B2018 22 25 30 47 51 62 69 108 118 128 (10.0) (15) 1 (1.6) (20) 1 (1.6) /16" /16" 3 /32" 3 /32" 3 /32" 1 /8" 1 /8" 5 /32" 5 /32" 5 /32" (25) (32) (40) (50) (65) (80) (90) (100) (2.3) (2.3) (2.3) (3.2) (3.2) (3.9) (3.9) (3.9) Wt./C (11.3) (13.6) (21.8) (23.1) (28.1) (31.3) Clearance (49.0) (53.5) (58.0) B2070 THRU B2080 PARALLEL PIPE CLAMP •Safety Factor of 2 •Designed to support pipe or rigid conduit •Includes: 1 pr. Pipe Clamps 1 pc. Stand Off Plate 1 pc. Slotted Hex Head Machine Screws PIPE 1 pc. Square Nut SIZE •Standard finish: ZN A dimension, from bottom of channel to center of pipe. A Part No. B2070 B2071 B2072 B2073 B2074 B2075 B2076 B2077 B2078 B2079 B2080 Pipe Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) A 111/16” 13/4” 17/8” 2” 23/16” 25/16” 29/16” 27/8” 33/16” 37/16” 35/8” (42.9) (44.4) (47.6) (50.8) (55.6) (58.7) (65.1) (73.0) (80.9) (87.3) (92.1) Material Design Load Thickness Lbs. kN 16 Ga. (1.5) 300 (1.33) 16 Ga. (1.5) 300 (1.33) 14 Ga. (1.9) 300 (1.33) 14 Ga. (1.9) 400 (1.78) 14 Ga. (1.9) 400 (1.78) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 11 Ga. (3.0) 500 (2.22) 11 Ga. (3.0) 500 (2.22) Design Load Reference page 110 for general fitting and standard finish specifications. 123 Wt./C Lbs. kg 24 (10.9) 26 (11.8) 30 (13.6) 33 (14.9) 36 (16.3) 50 (22.7) 55 (24.9) 60 (27.2) 66 (29.9) 85 (38.5) 95 (43.1) Pipe/Conduit Clamps & Hangers B437-1/2 B437-3/4 B437-1 B437-11/4 B437-11/2 B437-2 B437-21/2 B437-3 B437-31/2 B437-4 B437-5 B437-6 B437-8 Pipe Size Pipe Clamps B670 SERIES B671 SERIES •Designed to support pipe or rigid conduit parallel to the edge of a beam or angle iron •Hardware included •Material: Malleable Iron •Standard finish: HDG •Designed to support pipe or rigid conduit perpendicular to the edge of a beam or angle iron •Hardware included •Material: Malleable Iron •Standard finish: HDG EDGE PIPE CLAMP PARALLEL PIPE CLAMP Pipe/Conduit Clamps & Hangers Part Number Pipe or Conduit Wt./C Size Lbs. kg B670-3/8 B670-1/2 B670-3/4 B670-1 B670-11/4 B670-11/2 B670-2 B670-21/2 B670-3 B670-31/2 B670-4 3/8” (10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 32 58 64 70 77 93 105 143 164 190 205 (14.5) (26.3) (29.0) (31.7) (34.9) (42.2) (47.6) (64.8) (74.4) (86.2) (93.0) Part Number Pipe or Conduit Wt./C Size Lbs. kg B671-1/2 B671-3/4 B671-1 B671-11/4 B671-11/2 B671-2 B671-21/2 B671-3 1/2” 67 71 85 91 115 135 183 230 (15) (20) (25) (32) (40) (50) (65) (80) 3/4” 1” 11/4” 11/2” 2” 21/2” 3” (30.4) (32.2) (38.5) (41.3) (52.1) (61.2) (83.0) (104.3) B422 SERIES RIGHT ANGLE CLAMP •Safety Factor of 5 •Material: 7 Gauge (4.5) •Standard finishes: ZN, SS4 Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4 Conduit Size 1/2” 3/4” 1” 11/4” 11/2” 2 21/2” 3” 31/2” 4” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6” (60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4) B3367S Design Load Vertical Pull Lbs. kg Lbs. 250 300 400 400 500 600 700 800 900 1000 38 39 48 50 59 75 98 111 123 135 3/8” (9.5) RETAINING STRAP (1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45) x 1/2” Wt./C A kg (17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2) B3367S-1 U-BOLT AND HEX NUTS Design Load Vertical Pull 13 GAUGE (2.3) (12.7) Slots •Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6), 10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2) •Material: Steel •Standard finishes: ZN, PLN L 21/4” Part No. B3367S-1-L B3367S-2-L Hole Dia. D For Use With Wt./C** Lbs. kg 7/16” (30.1) 9/16” (30.1) B422-1/2 & 3/4 B422-1, 11/4 & 11/2 33.4 (5.8) 12.8 (15.1) (57.1) NEW B3367S-2 12 GAUGE 3/8” Dia. (19.0) (2.6) ** Wt./C based on 6” (152.4) length. For each additional inch in strap length add the following to the Wt./C. For B3367S-1 add 5.7 Lbs (2.6 kg) For B3367S-2 add 2.2 Lbs (1.0 kg) Note: Use B3367-3/8 retaining strap (page 100) for B422-2 thru 4 3/4” (19.0) L Reference page 110 for general fitting and standard finish specifications. 124 Pipe Clamps B2301 SERIES ONE HOLE EMT STRAP HOLE DIA. •Standard finish: ZN W T Part No. T 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” (25) .050 .050 .050 .065 .090 .090 (32) (40) (50) Hole Dia. W Wt./C Lbs. kg (1.3) 3/4” (19.0) 9/32” (7.1) (1.3) 7/8” (22.2) 9/32” (7.1) (1.3) 1” 11/4” 1” 11/4” (25.4) 9/32” (7.1) (31.7) 9/32” (7.1) (25.4) 11/32” (8.7) (31.7) 13/32” (10.3) (1.6) (2.3) (2.3) 2.4 4.2 8.3 11.0 14.8 21.6 (1.1) (1.9) (3.7) Pipe/Conduit Clamps & Hangers B2301-1/2 B2301-3/4 B2301-1 B2301-11/4 B2301-11/2 B2301-2 Conduit Size (5.0) (6.7) (9.8) B2302 SERIES ONE HOLE RIGID CONDUIT/PIPE STRAP •Standard finish: ZN Part No. B2302-1/4 B2302-3/8 B2302-1/2 B2302-3/4 B2302-1 B2302-11/4 B2302-11/2 B2302-2 B2302-21/2 B2302-3 B2302-31/2 B2302-4 Conduit/Pipe Size 1/4” (6) 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) T .045 .050 .050 .050 .065 .065 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4” Hole Dia. W Wt./C Lbs. kg (1.1) 5/8” (15.9) 13/64” (5.1) (1.3) 3/4” (19.0) 9/32” (7.1) (1.3) 7/8” (22.2) 9/32” (7.1) (1.3) 7/8” (22.2) 9/32” (7.1) (1.6) 1” 11/4” 1” 1 1 /4” 11/4” 11/4” 11/4” 11/4” (25.4) 9/32” (7.1) (31.7) 21/64” (8.3) (25.4) .380 .389 .665 .650 .622 .630 (9.6) (1.6) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3) (31.7) (31.7) (31.7) (31.7) (31.7) (9.9) (16.9) (16.5) (15.8) (16.0) 1.4 2.4 3.3 3.8 7.2 11.0 19.2 28.8 55.2 68.0 96.0 108.0 (.6) (1.1) HOLE DIA. (1.5) (1.7) (3.2) (5.0) (8.7) (13.0) W T (25.0) (30.8) (43.5) (49.0) B2084 THRU B2091 ONE HOLE O.D. TUBING CLAMP •Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield •Standard finish: ZN Part No. B2084 B2085 B2086 B2087 B2088 B2089 B2090 B2091 O.D. Size 9/32” (7.1) DIA. Wt./C Lbs. kg A 1/4” (6.3) 7/8” (22.2) 5/16” (7.9) 29/32” (23.0) 3/8” (9.5) 31/32” (24.6) 1/2” (12.7) 11/16” (25.9) 5/8” (15.9) (19.0) 7/8” (22.2) 1” (25.4) 13/32” 15/32” 17/32” 19/32” (27.8) 3/4” (29.1) (30.7) (32.2) 4.0 4.2 5.2 5.8 7.1 7.7 8.7 10.0 (1.8) 3/8” (9.5) (1.9) 15/8” (2.3) (41.3) (2.6) (3.2) (3.5) (3.9) (4.5) Reference page 110 for general fitting and standard finish specifications. 125 A O.D. SIZE Pipe Clamps Design Load BL1400 SERIES CONDUIT HANGER •Safety Factor of 3 •Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit •Hardware included •Standard finishes: ZN, SS4 W CONDUIT SIZE A T Pipe/Conduit Clamps & Hangers HOLE SIZE B Part No Conduit Size A 1/2” 29/32” (15) BL1400 3/4” 31/32” BL1410 (20) BL1420 1” (25) 11/4” 1 BL1425 1 /4” EMT (32) 11/4” 1 1 BL1430 1 /4” R,1 /2” EMT (32) 113/32” BL1440 11/2” R (40) 15/8” BL1450 2” (50) 21/16” BL1460 21/2” (65) 21/16” BL1470 3” (80) 21/2” BL1480 31/2” (90) 23/4” BL1490 4” (100) 31/2” B T (23.0) 9/32” (7.1) (24.6) 9/32” (7.1) (31.7) 9/32” (7.1) (31.7) 9/32” (7.1) (35.7) 9/32” (8.7) (41.3) 11/32” (8.7) (47.6) 11/32” (8.7) (52.4) 11/32” (8.7) (63.5) 11/32” (8.7) (69.8) 11/32” (8.7) (88.9) 11/32” (8.7) 16 Ga. 16 Ga. 16 Ga. 18 Ga. 18 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. B3373 SERIES W (1.5) 3/4” (19.0) (1.5) 3/4” (19.0) (1.5) 3/4” (19.0) (1.2) 7/8” (22.2) (1.2) 7/8” (22.2) (1.5) 1” 11/4” 11/4” 11/4” 11/4” 11/4” (25.4) (1.5) (1.5) (1.5) (1.5) (1.5) (31.7) (31.7) (31.7) (31.7) (31.7) Design Load Lbs. kN Wt./C Lbs. kg 590 590 590 590 590 755 755 755 820 850 1410 6 7 8 10 10 17 25 26 33 36 40 (2.62) (2.62) (2.62) (2.62) (2.62) (3.36) (3.36) (3.36) (3.65) (3.78) (6.27) (2.7) (3.2) (3.6) (4.5) (4.5) (7.7) (11.3) (11.8) (14.9) (16.3) (18.1) PIPE SIZE RISER CLAMP •Safety Factor of 4 •B3373-3/4 thru B3373-8 are UL listed •Includes Hex Head Cap Screws and Hex Nuts •Standard finishes: ZN, PLN T W Pipe Size Part No. B3373-1/2 B3373-3/4 B3373-1 B3373-11/4 B3373-11/2 B3373-2 B3373-21/2 B3373-3 B3373-31/2 B3373-4 B3373-5 B3373-6 B3373-8 1/2” A A T (15) 9” (228.6) 3/16” (4.7) 3/4” (20) 91/4” (234.9) 3/16” (4.7) 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” 8” (25) 99/16” 10” 101/4” 103/4” 111/4” 1115/16” 123/8” 127/8” 14” 153/16” 173/4” (242.9) 3/16” (4.7) (254.0) 3/16” (4.7) (260.3) 3/16” (4.7) (273.0) 1/4” (6.3) (285.7) 1/4” (6.3) (303.2) 1/4” (6.3) (314.3) 1/4” (6.3) (327.0) 1/4” (6.3) (355.6) 1/4” (6.3) (385.8) 1/4” (6.3) (450.8) 3/8” (9.5) (32) (32) (40) (50) (65) (80) (90) (100) (100) (100) Design Load Lbs. kN W 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 11/2” 11/2” 11/2” (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (38.1) (38.1) (38.1) 255 255 255 255 255 255 390 530 670 810 1160 1570 2500 Reference page 110 for general fitting and standard finish specifications. 126 (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) (1.73) (2.36) (2.98) (3.60) (5.16) (6.98) (11.12) Wt./C Lbs. kg 103 106 111 114 120 167 177 191 216 227 471 518 950 (46.3) (47.7) (49.9) (51.3) (54.0) (75.1) (79.6) (85.9) (97.2) (102.1) (213.6) (234.9) (430.9) Pipe Hangers B3690 SERIES ADJUSTABLE J HANGER •Safety Factor of 5 •Material: 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield 11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1 7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and 1/4” (6.3) ASTM A1018 33,000 PSI min. yield •Standard finish: ZN A DIA. ‘D’ ROD TAKE-OUT C B ‘E’ DIAMETER. IS FOR WALL MOUNTING FELT LINE B3690F-SIZE Design Load Design Load Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8 Pipe or Conduit Size B (15) 13/32” (10.3) 3/4” (20) 13/32” (10.3) (25) 13/32” (32) 13/32” (40) 13/32” 1” 11/4” 11/2” (10.3) (10.3) (10.3) (50) 13/32” 21/2” (65) 9/16” (14.3) 3” 31/2” 4” 5” 6” 8” (80) 9/16” (14.3) (90) 9/16” (14.3) (100) 11/16” (17.5) (125) 11/16” (150) 13/16” (200) 13/16” 2” Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8 A 1/2” (10.3) (17.5) (20.6) (20.6) 23/32” 211/32” 219/32” 213/16” 31/16” 31/2” 47/16” 47/8” 53/16” 61/8” 63/4” 73/4” 91/4” T 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4” C (53.2) (59.5) (65.9) (71.4) (77.8) (88.9) (112.7) (123.8) (131.8) (155.6) (171.4) (196.8) (235.0) 1” 1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/2” 13/16” 1” W (2.6) 3/4” (19.0) (2.6) 3/4” (19.0) (2.6) 3/4” (19.0) (2.6) 3/4” (19.0) (2.6) 3/4” (19.0) (2.6) 3/4” (19.0) (3.0) 11/4” 11/4” 11/4” 11/4” 11/4” 11/4” 11/2” (31.7) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3) (31.7) (31.7) (31.7) (31.7) (31.7) (38.1) D E 13/32” (10.3) 1/4”-20 x 21/4” (25.4) 113/16” (46.2) 13/32” (10.3) 1/4”-20 x 21/2” 115/16” (49.2) 13/32” (10.3) 1/4”-20 x 23/4” (50.4) 13/32” (10.3) 1/4”-20 x 3” (53.7) 13/32” (10.3) 1/4”-20 x 31/4” (58.7) 13/32” (10.3) 1/4”-20 x 31/2” (76.2) 9/16” (14.3) 3/8”-16 x 41/2” (79.4) 9/16” (14.3) 3/8”-16 x 5” (81.0) 9/16” (14.3) 3/8”-16 x 51/2” (98.4) 9/16” (14.3) 3/8”-16 x 61/2” (100.8) 9/16” (14.3) 3/8”-16 x 71/2” (112.7) 9/16” (14.3) 3/8”-16 x 81/2” (125.4) 9/16” (14.3) 3/8”-16 x 101/2” (25.4) (25.4) 2” (25.4) 21/8” (25.4) 25/16” (25.4) (25.4) (25.4) (31.8) (38.1) (30.2) (25.4) 3” 31/8” 33/16” 37/8” 4” 47/16” 415/16” Design Load Lbs. kN Wt./C Lbs. kg 400 400 400 400 400 400 800 800 800 800 800 1000 1200 20 23 24 27 29 32 71 77 84 139 166 226 332 Reference page 110 for general fitting and standard finish specifications. 127 F (25.4) 111/16” (42.5) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (5.34) (9.1) (10.4) (10.9) (12.2) (13.1) (14.5) (32.2) (34.9) (38.1) (63.0) (75.3) (102.5) (150.6) Pipe/Conduit Clamps & Hangers BOLT SIZE ‘F’ AND HEX NUT INCLUDED TxW Pipe Hangers B386 SERIES A DIA. SUSPENSION ROD PIPE STRAP T •Safety Factor of 3 •Includes Hex Head Cap Screws and Hex Nuts •Standard finishes: ZN, GRN C W B Pipe/Conduit Clamps & Hangers Design Load Part No. Pipe Size B386-3/4 B386-1 B386-11/4 B386-11/2 B386-2 B386-21/2 B386-3 B386-31/2 B386-4 B386-5 B386-6 B386-8 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” A B C T W (20) 7/16” (11.1) 35/16” (84.1) 23/16” (55.6) 1/8” (3.2) (25) 7/16” (11.1) 33/4” 25/16” (58.7) 1/8” (3.2) (32) 7/16” (11.1) (101.6) 217/32” (64.3) 1/8” (3.2) (40) 7/16” (11.1) (109.5) 211/16” (68.3) 1/8” (3.2) (50) 7/16” (11.1) (139.7) 35/16” (84.1) 1/4” (6.3) (65) 9/16” (14.3) 9/16” (14.3) 4” 45/16” 51/2” 63/8” 7” 79/16” 85/8” 93/4” 115/8” 137/8” 31/2” 37/8” 41/8” 43/8” 53/16” 61/16” 71/8” (88.9) 1/4” (6.3) (98.4) 1/4” (6.3) (104.8) 1/4” (6.3) (111.1) 1/4” (6.3) (131.8) 1/4” (6.3) (154.0) 3/8” (9.5) (181.0) 3/8” (9.5) (80) (90) (100) 9/16” (14.3) 9/16” (14.3) (125) 11/16” (17.4) (150) 11/16” (17.4) (200) 13/16” (20.6) (95.2) (161.9) (177.8) (192.1) (219.1) (247.6) (295.3) (352.4) 1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/4” 11/2” 11/2” (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (31.7) (31.7) (38.1) (38.1) B394 SERIES Design Load Lbs. kN Wt./C Lbs. kg 730 730 730 730 730 1350 1350 1350 1350 2160 2160 3230 46 51 52 54 134 157 168 197 270 308 609 713 (3.25) (3.25) (3.25) (3.25) (3.25) (6.00) (6.00) (6.00) (6.00) (9.61) (9.61) (14.37) (20.8) (23.1) (23.6) (24.5) (60.8) (71.2) (76.2) (89.3) (122.4) (139.7) (276.4) (323.4) B DIA. PIPE STRAP •Safety Factor of 3 •Includes: 1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts 1 Hanger Strap •Standard finishes: ZN T CLAMP ONLY A PIPE SIZE W CLAMP ONLY Design Load Part No. B394-3/4 B394-1 B394-11/4 B394-11/2 B394-2 B394-21/2 B394-3 B394-31/2 B394-4 B394-5 B394-6 B394-8 Pipe Size 3/4” (20) 1” (25) 1 1 /4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150) 8” (200) A 35/16” 33/4” 4” 45/16” 51/2” 63/8” 7” 79/16” 85/8” 93/4” 115/8” 137/8” B T W (84.1) 7/16” (11.1) 1/8” (3.2) (95.2) 7/16” (11.1) 1/8” (3.2) (101.6) 7/16” (11.1) 1/8” (3.2) (109.5) 7/16” (11.1) 1/8” (3.2) (139.7) 7/16” (11.1) 1/4” (6.3) (161.9) 9/16” (14.3) 1/4” (6.3) (177.8) 9/16” (14.3) 1/4” (6.3) (192.1) 9/16” (14.3) 1/4” (6.3) (219.1) 11/16” (17.4) 1/4” (6.3) (247.6) 11/16” (17.4) 1/4” (6.3) (295.3) 13/16” (20.6) 3/8” (9.5) (352.4) 13/16” (20.6) 3/8” (9.5) 1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/4” 11/2” 11/2” (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (31.7) (31.7) (38.1) (38.1) Design Load Lbs. kN 500 (2.22) 500 (2.22) 500 (2.22) 800 (3.56) 1040 (4.62) 1040 (4.62) 1040 (4.62) 1040 (4.62) 1040 (4.62) 1040 (4.62) 1615 (7.18) 1615 (7.18) Reference page 110 for general fitting and standard finish specifications. 128 Wt./C Lbs. kg 71 (32.2) 76 (34.5) 77 (34.9) 79 (35.8) 166 (75.3) 179 (81.2) 190 (86.2) 203 (92.1) 320 (145.1) 353 (160.1) 637 (288.9) 837 (379.6) Pipe Brackets B591 SERIES PIPE BRACKET SADDLE AND CLAMP •Safety Factor of 3 •Inside brace not required on B591-2 and B591-21/2 •Includes: 1 pc. Saddle bottom 1 pc. Saddle top (clamp) 2 pcs. Hex Head Cap Screws 2 pcs. Hex Nuts •Standard finish: ZN 113/16” (30.1) PIPE SIZE 1/4” (6.3) B D W Pipe/Conduit Clamps & Hangers A C Design Load Part No. B591-2 B591-21/2 B591-3 B591-31/2 B591-4 B591-5 B591-6 B591-8 Pipe Size 2” (50) 21/2” (65) 3” 31/2” 4” 5” 6” 8” (80) (90) (100) (125) (150) (200) A 41/2” 5” 51/2” 6” 61/2” 71/2” 8” 9” (114.3) (127.0) (139.7) (152.4) (165.1) (190.5) (203.2) (228.6) B 41/2” 5” 53/4” 63/4” 63/4” 8” 83/4” 101/2” C (114.3) 73/16” (182.6) (127.0) 715/16” (201.6) (146.0) 83/4” (222.2) (171.4) (171.4) (203.2) (222.2) (266.7) 91/2” 101/4” 121/8” 133/16” 159/16” (241.3) (260.3) (308.0) (335.0) (395.3) D 31/16” 39/16” 313/16” 49/16” 61/16” 61/16” 613/16” 89/16” W (77.8) 15/8” (41.3) (90.5) 15/8” (41.3) (96.8) 15/8” (41.3) (115.9) 15/8” (41.3) (128.6) 15/8” (41.3) (154.0) 15/8” (41.3) (173.0) 15/8” (41.3) (217.5) 2” (50.8) Reference page 110 for general fitting and standard finish specifications. 129 Design Load Lbs. kN Wt./C Lbs. kg 1235 1180 1125 1070 1015 960 905 850 290 330 439 490 545 666 724 1087 (5.53) (5.29) (5.04) (4.79) (4.55) (4.30) (4.05) (3.81) (131.5) (149.7) (199.1) (222.2) (247.2) (302.1) (328.4) (493.0) Pipe Block B356 PIPE BLOCK-2” (50) TO 8” (200) PIPE Pipe/Conduit Clamps & Hangers •Required hardware not included: 1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut •Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield •Standard finish: ZN •Wt./C 42 Lbs. (19.0 kg) Per Pair HOLE FOR 3/8”-16 HHCS 1” (25.4) 31/16” (77.8) Reference page 110 for general fitting and standard finish specifications. 130 Pipe Rollers B218 PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE •Design Load 500 Lbs. (2.22 kN) •Safety Factor of 5 •When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) •Malleable Iron Rollers •Sold in pairs •Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts •Standard finish: ZN •Wt./C 256 Lbs. (116.1 kg) Per Pair B 25/8” (66.7) A (60.3) REFERENCE CHART - A DIMENSION Insulation Thickness Pipe Size 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” (40) (50) (65) (80) (90) (100) (125) (150) (200) 0” (0.0) 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 75/8” 81/2” 9” 10” (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (193.7) (215.9) (228.6) (254.0) 1” (25.4) – 71/4” 71/4” 71/4” 75/8” 75/8” 8” 81/2” 81/2” 9” 9” 10” 11” – (184.1) (184.1) (184.1) (193.7) (193.7) (203.2) (215.9) (215.9) (228.6) (228.6) (254.0) (279.4) 11/2” (38.1) – 75/8” 75/8” 8” 8” 81/2” 81/2” 9” 9” 9” 10” 10” 11” 21/2” (63.5) 2” (50.8) – (193.7) (193.7) (203.2) (203.2) (215.9) (215.9) (228.6) (228.6) (228.6) (254.0) (254.0) (279.4) – 8” 81/4” 81/4” 81/2” 81/2” 9” 9” 10” 10” 10” 11” 11” – – – – – 9” 9” 10” 10” 10” 10” 11” 11” 12” (203.2) (209.5) (209.5) (215.9) (215.9) (228.6) (228.6) (254.0) (254.0) (254.0) (279.4) (279.4) – – – – (228.6) (228.6) (254.0) (254.0) (254.0) (254.0) (279.4) (279.4) (304.8) 3” (76.2) – – – – – – – 10” 10” 11” 11” 11” – – – – – – – – (254.0) (254.0) (279.4) (279.4) (279.4) – 4” (101.6) – – – – – – – – – – 12” 12” – – – – – – – – – – – (304.8) (304.8) – REFERENCE CHART - B DIMENSION Insulation Thickness Pipe Size 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” (40) (50) (65) (80) (90) (100) (125) (150) (200) 0” (0.0) 211/16” 213/16” 215/16” 31/8” 31/4” 39/16” 313/16” 41/8” 43/8” 45/8” 5” 1 5 /2” 615/16” (68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (96.8) (104.8) (111.1) (117.5) (127.0) (139.7) (160.3) 1” (25.4) – 37/8” 43/16” 43/16” 43/8” 411/16” 47/8” 51/16” 55/16” 59/16” 61/16” 67/16” 73/8” – (98.4) (106.4) (106.4) (111.1) (119.1) (123.8) (128.6) (134.9) (141.3) (154.0) (163.5) (187.3) 11/2” (38.1) – 43/8” 411/16” 45/8” 47/8” 51/16” 55/16” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16” 2” (50.8) – (111.1) (119.1) (117.5) (123.8) (128.6) (134.9) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6) – 47/8” 51/16” 51/8” 55/16” 55/8” 6” 61/8” 61/4” 67/16” 7” 3 7 /8” 87/16” – (123.8) (128.6) (130.2) (134.9) (142.9) (152.4) (155.6) (158.7) (163.5) (177.8) (187.3) (214.3) 21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 715/16” 815/16” – – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (201.6) (227.0) Reference page 110 for general fitting and standard finish specifications. 131 3” (76.2) – – – – – – – 7” 71/4” 73/8” 77/8” 81/2” – – – – – – – – (177.8) (184.1) (187.3) (200.0) (215.9) – 4” (101.6) – – – – – – – – – – – – – – – – – – – – 813/16” (223.8) 91/2” (241.3) – – Pipe/Conduit Clamps & Hangers 23/8” Pipe Rollers B219 PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE •Design Load 750 Lbs. (3.33 kN) •Safety Factor of 5 •Requires field assembly •When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) •Malleable Iron Rollers •Sold in pairs •Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts •Reference sizing chart on page 133 •Standard finish: ZN B 25/8” Pipe/Conduit Clamps & Hangers (66.7) A 23/8” (60.3) REFERENCE CHART - A DIMENSION Part No. B219 B219-1 B219-2 B219-3 B219-4 B219-5 Wt./C PR Lbs. kg 253 (114.7) 258 (117.0) 263 (119.3) 269 (122.0) 274 (124.8) 279 (126.5) A 71/4” 8” 9” 10” 107/8” 115/8” (184.1) (203.2) (228.6) (254.0) (276.2) (295.3) REFERENCE CHART - B DIMENSION Insulation Thickness Pipe Size 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” 8” 10” 12” 0” (0.0) 211/16” (20) 213/16” (25) 215/16” (32) 31/8” (40) 31/4” (50) 39/16” (65) 33/4” (80) 41/8” (90) 41/4” (100) 49/16” (125) 51/16” (150) 57/16” (200) 63/8” (250) 75/16” (300) 81/4” (15) (68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (95.2) (104.8) (107.9) (115.9) (128.6) (138.1) (161.9) (185.7) (209.5) 1” (25.4) – 37/8” 43/16” 43/16” 47/16” 45/8” 47/8” 51/8” 51/4” 51/2” 61/16” 67/16” 77/16” 83/16” – – (98.4) (106.4) (106.4) (112.7) (117.5) (123.8) (130.2) (133.3) (139.7) (154.0) (163.5) (188.9) (208.0) – 11/2” (38.1) – 41/2” 45/8” 45/8” 47/8” 53/16” 51/4” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16” – – 2” (50.8) – (114.3) (117.5) (117.5) (123.8) (131.8) (133.3) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6) – – – 47/8” 51/16” 51/8” 51/4” 51/2” 6” 61/16” 61/4” 67/16” 7” 73/8” 83/8” – – – (123.8) (128.6) (130.2) (133.3) (139.7) (152.4) (154.0) (158.7) (163.5) (177.8) (187.3) (212.7) – – 21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 77/8” 9” – – – – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (200.0) (228.6) – – 3” (76.2) – – – – – – – 615/16” 71/16” 73/8” 77/8” 815/16” – – – Reference B219 sizing chart on page 133 Reference page 110 for general fitting and standard finish specifications. 132 – – – – – – – (176.2) (179.4) (187.3) (200.0) (211.1) – – – 4” (101.6) – – – – – – – – – – – – – – – – – – – – 815/16” (227.0) 99/16” (242.9) – – – – – – Pipe Rollers B219 SIZING CHART Insulation Thickness Pipe Size 1/2” 3/4” 1” (25.4) 11/2” (38.1) 2” (50.8) B219 B219 B219 B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-3 B219-4 B219-5 – B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-3 B219-4 B219-5 – – B219 B219-1 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-4 – – – B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-3 B219-4 B219-5 – – 21/2” (63.5) – – – – B219-2 B219-2 B219-3 B219-3 B219-3 B219-3 B219-4 B219-4 B219-5 – – Reference page 110 for general fitting and standard finish specifications. 133 3” (76.2) – – – – – – – B219-3 B219-4 B219-4 B219-4 B219-5 – – – 4” (101.6) – – – – – – – – – – B219-5 B219-5 – – – Pipe/Conduit Clamps & Hangers 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” 10” 12” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) 0” (0.0) Pipe Rollers B379 PIPE ROLLERS-6” (150) TO 18” (450) PIPE Pipe/Conduit Clamps & Hangers •Design Load 1500 Lbs. (6.67 kN) •Safety Factor of 5 •Requires field assembly •When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) •Malleable Iron Rollers •Sold in pairs •Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts •Standard finish: ZN •Wt./C 889 Lbs. (403.2 kg) B 4” (101.6) A REFERENCE CHART - A DIMENSION Insulation Thickness Pipe Size 6” 8” 10” 12” 14” 16” 18” (150) (200) (250) (300) (350) (400) (450) 0” (0.0) 99/16” 101/4” 11” 1111/16” 121/16” 123/4” 131/2” (242.9) (260.3) (279.4) (296.9) (306.4) (323.8) (342.9) 1” (25.4) 103/16” 111/16” 113/4” 129/16” 127/8” 131/2” 141/4” 11/2” (38.1) 21/2” (63.5) 2” (50.8) (258.8) 105/8” (269.9) 11” 113/4” 121/2” 131/4” 139/16” 1413/16” 15” (281.0) 113/8” (288.9) (298.4) 121/8” (308.0) (319.1) 127/8” (327.0) (327.0) 133/16” (335.0) (342.9) 137/8” (352.4) (361.9) 145/8” (371.5) (279.4) 113/8” (288.9) (298.4) 123/16” (309.6) (317.5) 1213/16” (325.4) (336.5) 139/16” (344.5) 137/8” (352.4) (360.4) 141/2” (368.3) (381.0) 155/16” (388.9) (344.5) 3” (76.2) 113/4” 121/2” 131/8” 137/8” 141/4” 147/8” 155/8” (298.4) (317.5) (333.4) (352.4) (361.9) (377.8) (396.9) 4” (101.6) 121/2” 131/4” 137/8” 145/8” 147/8” 151/2” 165/16” (317.5) (336.5) (352.4) (371.5) (377.8) (393.7) (414.3) REFERENCE CHART - B DIMENSION Insulation Thickness Pipe Size 6” 8” 10” 12” 14” 16” 18” (150) (200) (250) (300) (350) (400) (450) 0” (0.0) 67/8” 713/16” 813/16” 93/4” 105/16” 115/16” 121/4” (174.6) (198.4) (223.8) (247.6) (261.9) (287.3) (311.1) 1” (25.4) 77/8” 87/8” 97/8” 1015/16” 113/8” 125/16” 131/4” 11/2” (38.1) 83/8” (225.4) 93/8” (250.8) 107/16” (277.8) 113/8” (288.9) 117/8” (312.7) 1213/16” (336.5) 133/4” (200.0) 2” (50.8) (212.7) (238.1) (265.1) (288.9) (301.6) (325.4) (349.2) 87/8” 97/8” 1015/16” 117/8” 125/16” 131/4” 143/16” (225.4) (250.8) (277.8) (301.6) (312.7) (336.5) (360.4) 21/2” (63.5) 93/8” 107/16” 113/8” 125/16” 1213/16” 133/4” 1411/16” (238.1) (265.1) (228.9) (312.7) (325.4) (349.2) (373.1) 3” (76.2) 97/8” 1015/16” 117/8” 1213/16” 131/4” 141/4” 151/8” Reference page 110 for general fitting and standard finish specifications. 134 4” (101.6) (250.8) 1015/16” (277.8) (277.8) (301.6) (325.4) (336.5) (361.9) (384.2) 117/8” 1213/16” 133/4” 141/4” 151/8” 161/16” (301.6) (325.4) (349.2) (361.9) (384.2) (408.0) Pipe Rollers B479 PIPE ROLLERS-16” (400) TO 30” (750) PIPE •Design Load 2000 Lbs. (8.89 kN) •Safety Factor of 5 •Requires field assembly •When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) •Malleable Iron Rollers •Sold in pieces •Required hardware not included: 4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 4 pcs. 1/2”-13 Channel Nuts •Standard finish: ZN •Wt./C 889 Lbs. (403.2 kg) Pipe/Conduit Clamps & Hangers B 4” (101.6) A 213/16” (71.4) REFERENCE CHART - A DIMENSION Insulation Thickness Pipe Size 16” 18” 20” 24” 30” (400) (450) (500) (600) (750) 0” (0.0) 153/16” 151/2” 16” 1613/16” 1713/16” (385.8) (393.7) (406.4) (427.0) (452.4) 1” (25.4) 155/8” 16” 163/8” 175/16” 181/4” (396.9) (406.4) (415.9) (439.7) (463.5) 11/2” (38.1) 157/8” 163/16” 169/16” 171/2” 183/8” 2” (50.8) (403.2) (411.2) (420.7) (444.5) (466.7) 16” 163/8” 167/8” 171/2” 189/16” (406.4) (415.9) (428.6) (444.5) (471.5) 21/2” (63.5) 161/4” 169/16” 1615/16” 1711/16” 187/8” (412.7) (420.7) (430.2) (449.3) (476.2) 3” (76.2) 161/2” 163/4” 173/16” 177/8” 187/8” (419.1) 4” (101.6) 17” (431.8) (425.4) 173/16” (436.6) (436.6) 171/2” (444.5) (454.0) 181/8” (460.4) (479.4) 191/4” (488.9) REFERENCE CHART - B DIMENSION Insulation Thickness Pipe Size 16” 18” 20” 24” 30” (400) (450) (500) (600) (750) 0” (0.0) 1013/16” 117/8” 123/16” 1413/16” 1713/16” 1” (25.4) (274.6) 1115/16” (303.2) (301.6) 1215/16” (328.6) (325.4) 1315/16” (354.0) (376.2) (452.4) 157/8” (403.2) 187/8” (479.4) 11/2” (38.1) 123/8” 137/16” 147/16” 163/8” 193/8” 2” (50.8) (314.3) 1215/16” (328.6) (341.3) 1315/16” (354.0) (366.7) 147/8” (377.8) (415.9) 167/8” (428.6) (492.1) 197/8” (504.8) 21/2” (63.5) 133/8” 147/16” 157/16” 173/8” 203/8” 4” (101.6) (339.7) 1315/16” (354.0) 1415/16” (379.4) (366.7) 1415/16” (379.4) 1515/16” (404.8) 157/8” (403.2) 1615/16” (430.2) 177/8” (454.0) 187/8” (479.4) (517.5) 205/16” (531.8) 2115/16” (557.2) (392.1) (441.3) Reference page 110 for general fitting and standard finish specifications. 135 3” (76.2) Dura-Blok™ Rooftop Supports Cooper B-Line’s new line of Dura-Blok™ products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Bloks are ideal for such roof top support applications as pipe, HVAC, duct, conduit, cable tray, and roof walkways. Manufactured to provide years of service in harsh, roof top environments, Dura-Bloks are made from 100% recycled rubber, require no supplemental rubber pads, and will not float or blow away. 1” gaps between blocks allow water to flow freely around longer assemblies. For added strength, the Dura-Blok support channel is through bolted on all sizes. For added visibility, a reflective strip is incorporated on both sides of each Dura-Blok. Beyond product durability, Dura-Bloks help to dampen vibration, are not sharp or abrasive and require no roof penetration to maximize existing roof life - and roof structural and environmental integrity. Recommended Torque (In channels) Dura-Blok™ Supports See page 44 Channel Nuts & Hardware section Materials & Finishes See appropriate fitting’s pages Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 136 Dura-Blok™ Rooftop Supports NEW SUPPORT BASES ONLY • Base only - see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating” 500 lbs. (2.22KN) (Uniform Load)* • Dura-Blok™ channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The Dura-Blok is UV resistant and suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories. Height x Width x Length In. (mm) Part No. DBM Wt./Each Lbs. (kg) DBM 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 2.35 (1.07) DBP 4” x 6” x 9.6” (101.6 x 152.4 x 243.8) 4.48 (2.03) DBP DB SERIES SUPPORT BASE WITH B44 CHANNEL • Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating - Ultimate Uniform Load (See Chart Below)* • Dura-Blok™ DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 142) • For sloped roofs use B634 adjustable hinge fittings (see Strut Systems catalog). Height x Width x Length In. (mm) Part No. Wt./Each Lbs. (kg) Load Rating Lbs. (kN) 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 2.75 (125) 500 (2.22) 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 5.28 (2.39) 500 (2.22) DB20 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 10.63 (4.82) 1000 (4.45) DB30 5” x 6” x 30.8” (127.0 x 152.4 x 782.3) 15.99 (7.25) 1500 (6.67) DB40 5” x 6” x 41.4” (127.0 x 152.4 x 1051.5) 21.34 (9.68) 2000 (8.89) DB48 5” x 6” x 52.0” (127.0 x 152.4 x 1320.8) 26.70 (12.40) 2500 (11.12) DB20 DB40 DB6 SERIES SUPPORT BASE WITH B12 CHANNEL • Base with 12 ga. (2.6mm) galvanized channel 27/16” high (61.9mm) see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating - Ultimate Uniform Load (See Chart Below)* • Dura-Blok™ DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 142) • For sloped roofs use B634 adjustable hinge fittings (see Strut Systems catalog). Height x Width x Length In. (mm) Part No. Wt./Each Lbs. (kg) Load Rating Lbs. (kN) DB610 67/16” x 6” x 9.6” (163.5 x 152.4 x 243.8) 6.36 (2.88) 500 (2.22) DB620 67/16” x 6” x 20.2” (163.5 x 152.4 x 513.1) 12.90 (5.85) 1000 (4.45) DB630 67/16” x 6” x 30.8” (163.5 x 152.4 x 782.3) 19.45 (8.82) 1500 (6.67) DB640 67/16” x 6” x 41.4” (163.5 x 152.4 x 1051.5) 26.00 (11.79) 2000 (8.89) DB648 67/16” x 6” x 52.0” (163.5 x 152.4 x 1320.8) 32.55 (14.76) 2500 (11.12) * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. Reference page 136 for general fitting and standard finish specifications. 137 DB610 DB620 DB630 Dura-Blok™ Supports DB5 DB10 DB10 Dura-Blok™ Rooftop Supports NEW DB10 SERIES SUPPORT BASES WITH B22 CHANNEL • Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel 15/8” high (41.3mm) see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* • Dura-Blok™ DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 142) Height x Width x Length In. (mm) Part No. DB10-28 55/8” x 6” x 28” DB10-36 55/8” DB10-42 DB10-50 55/8” DB10-60 DB10-36 Wt./Each Lbs. (kg) (142.9 x 152.4 x 711.2) 13.16 (5.97) x 6” x 36” (142.9 x 152.4 x 914.4) 14.36 (6.51) 55/8” x 6” x 42” (142.9 x 152.4 x 1066.8) 15.52 (7.04) x 6” x 50” (142.9 x 152.4 x 1270.0) 16.45 (7.46) 55/8” x 6” x 60” (142.9 x 152.4 x 1524.0) 17.94 (8.14) DB10-50 DBM SERIES Dura-Blok™ Supports SUPPORT BASE WITH RISER ROD & CLAMP • Base with 3/8”-16 threaded rod and B3198H clamp see chart for height, width and length • 100% recycled rubber, UV resistant. • Load Rating” 50 lbs. (0.22kN) (Ultimate Load)* • Dura-Blok™ DBM-Series pipe/tubing support is designed for support of single piping systems where elevation adjustment is needed. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. DBM-1 DBM-2CT Part No. Clamp Part No.† DBM-1/2CT B3198HCT-1/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.69”-11.19” (246.1-284.2) 2.75 (1.25) DBM-3/4CT B3198HCT-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.84”-11.34” (249.9-2288.0) 2.76 (1.25) DBM-1CT Block -Height x Width x Length In. (mm) Height** Min.-Max. In. (mm) Wt./Each Lbs. (kg) B3198HCT-1 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.95”-11.45” (252.7-290.8) 2.84 (1.29) DBM-11/4CT B3198HCT-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.13”-11.63” (257.3-295.4) 2.95 (1.34) DBM-11/2CT B3198HCT-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.28”-11.78” DBM-2CT B3198HCT-2 (261.1-299.2) 2.96 (1.34) 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.53”-12.03” (267.4-305.5) 3.03 (1.37) DBM-1/2 B3198H-1/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.86”-11.36” (250.4-288.5) 2.78 (1.26) DBM-3/4 B3198H-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.06”-11.56” (255.5-293.6) 2.84 (1.29) DBM-1 B3198H-1 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.14”-11.64” (257.5-295.6) 2.86 (1.30) DBM-11/4 B3198H-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.25”-11.75” (260.3-298.4) 2.93 (1.33) DBM-11/2 B3198H-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.42”-11.92” (264.6-302.7) 2.99 (1.36) 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.66”-12.16” (270.7-308.8) 3.10 (1.41) DBM-2 B3198H-2 † See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing. * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. Reference page 136 for general fitting and standard finish specifications. 138 NEW DBE SERIES Dura-Blok™ Rooftop Supports SUPPORT BASE WITH ROD RISERS & CHANNEL • Base with (2) 1/2” electro zinc all threaded rod risers - Top channel is 1” (25.4mm) tall. see chart for adjustable height x wide x length. • 100% recycled rubber, UV resistant. • Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate CLDP10) • Dura-Blok™ DBE-Series channel support is designed as a superior support of piping systems, cable tray, HVAC equipment and many other applications where elevation adjustment is critical. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 142) Adjustable Height x Width x Length In. (mm) Part No. DBE10-8 DBE10-12 DBE10-16 51/2-8” x 6” x 9.6” 51/2-12” x 6” x 9.6” 51/2-16” x 6” x 9.6” Wt./Each Lbs. (kg) (139.7-152.4 x 152.4 x 243.8) (139.7-304.8 x 152.4 x 243.8) (139.7-406.4 x 152.4 x 243.8) 5.68 5.72 5.76 (2.58) (2.59) (2.61) DBR SERIES SUPPORT BASE WITH ROD RISERS & PIPE ROLL Part No. DBR10-12 Adjustable Height x Width x Length In. (mm) up to 12” x 6” x 9.6” Dura-Blok™ Supports • Base with (2) 1/2” electro zinc all threaded rod risers and a B3114-31/2 pipe roll with sockets - base is 4” (101.6mm) high x 6” (152.4mm) wide x 9.6” (243.8mm) long. Overall height is 12” (304.8mm) from bottom of base to contact point on roller. • Pipe roll & sockets for up to 31/2” (90) pipe sizes. • 100% recycled rubber, UV resistant. • Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate CLDP10) • Dura-Blok™ DBR-Series support is designed to support pipe up to 31/2” (90) nominal size where difference in elevation is required and longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. Wt./Each Lbs. (kg) (up to 304.8 x 152.4 x 243.8) 8.20 (3.72) CLDP10 LOAD DISTRIBUTION PLATE • 11 ga. (3.0mm) steel plate with slots. • Dimensions: 15/8” (41.3mm) wide x 91/2” (241.3mm) long. • Dura-Blok™ CLDP10 load bearing stabilizer plate increases load ratings for DBE Series and DBR Series by allowing the load from the threaded rods to be distributed over the length of the base instead of the point load where the rods attach to the base. Part No. CLDP10 Thickness x Width x Length In. (mm) 11 Ga. x 15/8” x 91/2” (3.0 x 41.3 x 241.3) Loosen hex nuts and slide plate under the flat washers Wt./Each Lbs. (kg) 0.53 (0.24) Retighten the hex nuts with plate in place * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. Reference page 136 for general fitting and standard finish specifications. 139 Dura-Blok™ Rooftop Supports NEW DB__DS SERIES SUPPORT BASES WITH B22SH VERTICAL & HORIZONTAL CHANNEL MEMBERS • Product is shipped unassembled. B + 4.5” (114mm) B Height DB2318DS (overall) Dura-Blok™ Supports A Length Width (overall) DB2924DS DB5336DS Features • Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) Bases are 5” (127.0mm) high x 6” (152.4mm) wide x 20.2” (513.1mm) long. Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm) Fittings & Hardware - Electro-Plated Steel • 100% recycled rubber, UV resistant. • Ultimate Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* • Dura-Blok™ DB__DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 142) * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. Reference page 136 for general fitting and standard finish specifications. 140 (overall) Dura-Blok™ Rooftop Supports DB__DS SERIES cont. Part No. DB2318DS B In. (mm) DB2318DS 10.56” to 20.75” (268 to 527) 131/2” DB2918DS 10.56” to 26.75” (268 to 679) 131/2” (343) (343) (343) DB4118DS 10.56” to 38.75” (268 to 984) 131/2” DB5318DS 10.56” to 50.75” (268 to 1289) 131/2” (343) (495) DB2324DS 10.56” to 20.75” (268 to 527) 191/2” DB2924DS 10.56” to 26.75” (268 to 679) 191/2” (495) (495) DB4124DS 10.56” to 38.75” (268 to 984) 191/2” DB5324DS 10.56” to 50.75” (268 to 1289) 191/2” (495) (800) DB2336DS 10.56” to 20.75” (268 to 527) 311/2” DB2936DS 10.56” to 26.75” (268 to 679) 311/2” (800) (800) DB4136DS 10.56” to 38.75” (268 to 984) 311/2” DB5336DS 10.56” to 50.75” (268 to 1289) 311/2” (800) (1105) DB2348DS 10.56” to 20.75” (268 to 527) 431/2” DB2948DS 10.56” to 26.75” (268 to 679) 431/2” (1105) (1105) (1105) DB4148DS 10.56” to 38.75” (268 to 984) 431/2” DB5348DS 10.56” to 50.75” (268 to 1289) 431/2” Height (overall) In. (mm) 23” Width (overall) In. (mm) Length (overall) In. (mm) Wt./Each lbs. (kg) (584) 255/8” (651) 20.2” (513) 33.31 (15.11) DB2918DS 29” (736) 255/8” (651) 20.2” (513) 35.00 (15.88) DB4118DS 41” (1041) 255/8” (651) 20.2” (513) 38.40 (17.42) DB5318DS 53” (1346) 255/8” (651) 20.2” (513) 41.80 (18.96) DB2324DS 23” (584) 315/8” (803) 20.2” (513) 34.15 (15.49) (803) 20.2” (513) 35.84 (16.26) (803) 20.2” (513) 39.25 (17.80) DB2924DS 29” (736) 315/8” DB4124DS 41” (1041) 315/8” DB5324DS 53” (1346) 315/8” (803) 20.2” (513) 42.65 (19.34) DB2336DS 23” (584) 435/8” (1108) 20.2” (513) 35.84 (16.26) (1108) 20.2” (513) 37.56 (17.03) (1108) 20.2” (513) 40.95 (18.57) DB2936DS 29” (736) 435/8” DB4136DS 41” (1041) 435/8” DB5336DS 53” (1346) 435/8” (1108) 20.2” (513) 44.34 (20.11) DB2348DS 23” (584) 555/8” (1415) 20.2” (513) 37.55 (17.03) DB2948DS 29” (736) 555/8” (1415) 20.2” (513) 39.25 (17.80) DB4148DS 41” (1041) 555/8” (1415) 20.2” (513) 42.65 (19.34) (1346) 555/8” (1415) 20.2” (513) 46.03 (20.88) DB5348DS 53” A = Adjustable height from bottom of Dura-Blok to top of horizontal channel. B = Space between fittings that support horizontal channel. Height (overall) = Distance from bottom of Dura-Blok to top of upright channel. Width (overall) = Distance from outside-to-outside of Dura-Blok supports. Length (overall) = Distance from end-to-end of Dura-Blok supports. Reference page 136 for general fitting and standard finish specifications. 141 Dura-Blok™ Supports Part No. A Min. to Max. In. (mm) Dura-Blok™ Rooftop Supports NEW DBR SERIES SUPPORT BASES WITH B42 CHANNEL & PIPE ROLLER • Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) tall see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: (See Chart Below)* • Dura-Blok™ DBR-Series support is designed to support pipe where longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. DB$4-6 DBR16-20 Roller Part No.† Part No. DBR2-31/2 Block & Channel -Height x Width x Length In. (mm) Wt./Each Lbs. (kg) Load Rating Lbs. (kN) B3126-2 to 31/2 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 7.09” (180) 5.28 (2.39) 500 (2.22) B3126-4 to 6 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 7.09” (180) 10.63 (4.82) 500 (2.22) DBR8-10 B3126-8-10 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 8.34” (212) 15.99 (7.25) 1000 (4.45) DBR12-14 B3126-12-14 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 9.38” (238) 21.34 (9.68) 1000 (4.45) DBR16-20 B3126-16-20 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 9.78” (248) 26.70 (12.11) 1000 (4.45) DBR4-6 † See Pipe Hanger Catalog for dimensions and specifications. Dura-Blok™ Supports Height** In. (mm) ** From bottom of rubber block to bottom of pipe/tubing. Compatible Components Available to make Dura-Blok bases more versatile (See Strut Systems Catalog for other products) BTS TN Nuts B22SH B22TH HHCS B2400 Series B104 B101 B634 B-LINE 50 BVP1” I.P. I.P 1 1/2 B2000 Series B3124 Series BVT Series B218 B379 B219 Series B3126 Series B479 Above rollers can be mounted on C-Series and CB-Series units 19” (482mm) or longer. Reference page 136 for general fitting and standard finish specifications. 142 Dura-Blok™ Rooftop Supports ROOFTOP APPLICATIONS Dura-Blok™ Supports 143 Dura Clean™ Washdown Support System Cooper B-Line’s new line of Dura-Clean™ electrical and mechanical support products are specifically designed for the critical and rigorous wash-down requirements of the Food & Beverage and Pharmaceutical industries. Manufactured from high quality stainless steel with all angles minimized to prevent water pooling and collection, Dura-Clean™ strut and hanger components are designed with the durability and flexibility needed for applications where pipe, conduit and enclosures are subjected to regular, high pressure, high moisture wash-down environments. Dura-Clean™ products can be installed in trapeze configurations for hanging piping, conduit or virtually any type of roof supported racking system - or wall-mount configurations for vertical or horizontal pipe support runs and enclosure support. The new Dura-Clean™ Washdown Support System products from Cooper B-Line. Highest quality. Lasting durability. Immediate availability. Recommended Torque Bolt Size Foot/Lbs. Nm 3/8”-16 1/2”-13 19 26 50 68 Dura Clean™ Materials Finish Code SS4 Finish Stainless Steel Type 304 Specification ASTM A240 SS6 Stainless Steel Type 316 ASTM A240 Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 144 Dura Clean™ Channels NEW DURA CLEAN™ CHANNEL • Thickness: 12 Gauge (2.6mm) • Standard Lengths:12” (.30m), 24” (.61m), 48” (1.22m), 120” (3.06m) • Standard Finish: #4 Polished 304 Stainless Steel w/cellophane cover (other materials available upon request) • Weight: 1.68 lbs/ft (2.50kg/m) • 15/8” (41mm) x 15/8” (41mm) profile with 13/32” (10mm) x 3” (76mm) slot on 4” (101mm) centers • Straight leg design does not harbor water or dust, eliminating areas known to harbor bacteria • Profile allows product to be used with standard strut accessories Part No. In. Length (mm) 15/8” (41mm) DC22S-12 12” (305) DC22S-24 24” (610) DC22S-48 48” (1219) DC22S-120 120” (3048) Section Properties Channel Weight lbs./ft. kg/m DC22S DC22S DC22S DC22S DC22S DC22S DC22S DC22S DC22S DC22S 0.7628 X - X Axis Areas of Section in.2 cm2 0.4829 3.1155 Moment of Inertia (I) in.4 cm4 0.1328 5.5276 in.3 cm3 0.1283 2.1025 Radius of Gyration (R) in. cm in. mm lbs. N in. mm lbs. N lbs. N 12 18 24 30 36 42 48 54 60 305 2500 1667 1250 1000 833 714 625 556 500 562 0.0146 0.0329 0.0584 0.0913 0.1314 0.1788 0.2337 0.2960 0.3651 0.37 2500 1667 1250 1000 833 699 535 423 342 562 2500 1667 1250 913 634 466 357 282 228 562 610 762 914 1067 1219 1372 1524 281 225 187 161 141 125 112 0.83 1.48 2.32 3.34 4.54 5.94 7.52 9.27 in.4 cm4 Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load 375 Moment of Inertia (I) 375 281 225 187 157 120 95 77 375 281 205 143 105 80 63 51 Reference page 144 for general fitting and standard finish specifications. 145 Section Modulus (S) in.3 cm3 Radius of Gyration (R) in. cm 0.5244 1.332 0.2178 9.0655 0.2681 4.3934 0.6717 1.7061 Beam Span 457 Deflection Section Modulus (S) Y - Y Axis Dura Clean™ Channel 1.68 15/8” (41mm) Dura Clean™ Wall Rails NEW DURA CLEAN™ WALL MOUNT RAILS • Thickness: 12 Gauge (2.6mm) • Standard Lengths:12” (.30m), 24” (.61m), 48” (1.22m), 120” (3.06m) • Standard Finish: #4 Polished 304 Stainless Steel w/cellophane cover (other materials available upon request) • Weight: 1.90 lbs/ft (2.83kg/m) • Z-Profile with 13/32” (10mm) x 3” (76mm) slot on 4” (101mm) centers • DCSP spacers are used to offset profile 1” (25.4mm) from mounting surface to eliminate any area that may harbor bacteria Length Part No. In. DCWM-12 12” DCWM-24 24” (610) DCWM-48 48” (1219) DCWM-120 120” (3048) 1.72” (mm) (44mm) (305) 1.13” (29mm) 4.23” (107mm) 1.13” (29mm) Section Properties Channel X - X Axis Weight Dura Clean™ lbs./ft. kg/m Areas of Section in.2 cm2 DCWM 1.8999 0.8618 0.5456 3.5200 Channel DCWM DCWM DCWM DCWM DCWM DCWM DCWM DCWM DCWM Beam Span Uniform Load Moment of Inertia (I) in.4 cm4 0.7305 30.406 mm lbs. N in. mm 12 18 24 30 36 42 48 54 60 305 1350 900 675 540 450 386 338 300 270 303 0.0014 0.0032 0.0057 0.0090 0.0129 0.0176 0.0230 0.0290 0.0358 0.04 610 762 914 1067 1219 1372 1524 202 152 121 101 87 76 67 61 in.3 cm3 0.3564 5.8403 Y - Y Axis Radius of Gyration (R) in. cm Moment of Inertia (I) in.4 cm4 0.08 0.15 0.23 0.33 0.45 0.58 0.74 0.91 Reference page 144 for general fitting and standard finish specifications. 146 Section Modulus (S) in.3 cm3 1.1571 2.939 0.2345 9.7606 0.2646 4.336 Deflection in. 457 Section Modulus (S) Radius of Gyration (R) in. cm 0.6556 1.6652 Dura Clean™ Accessories NEW U-BOLTS • Material: Stream cleaned 304 Stainless Steel • Includes serrated flange hex nuts and flat washers • Designed for use with rigid/emt conduit, OD tubing and copper, schedule 40/80 and Ocal pipe sizes “A” 3/8”-16 Cut Threads “B” “C” Pipe - Conduit - Tubing Sizes Part OD Sch. Rigid EMT Copper Ocal Number Tubing 40/80 Pipe Conduit Conduit Pipe Pipe DC-1 DC-2 DC-3 DC-4 DC-5 DC-6 DC-7 DC-8 DC-9 DC-10 DC-11 DC-12 1/2”, 3/4” 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” - 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 1/2” 1/2” - 3/4” 3/4” 1/2” 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 1” 1 1 /4” 11/2” 2” 21/2” 3” 31/2” 4” - 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” in. 0.81 0.98 1.23 1.46 1.72 1.96 2.26 2.69 3.19 3.69 4.25 4.71 “A” “B” mm mm in. 20.6 0.88 0.88 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 25.0 31.1 37.0 43.7 49.8 57.4 68.2 80.9 93.6 108.0 119.5 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 in. “C” 1.50 1.67 1.91 2.15 2.41 2.65 2.95 3.38 3.88 4.38 4.88 5.33 mm 38.1 42.5 48.6 54.5 61.2 67.3 74.9 85.7 98.4 111.1 123.8 135.4 Design Load lbs. kN Wt./C lbs. kg 600 600 600 900 900 900 1200 1200 1200 1800 1800 1800 27.0 28.4 30.4 32.3 33.3 36.4 38.9 42.4 46.5 53.0 54.9 58.6 2.67 2.67 2.67 4.00 4.00 4.00 5.34 5.34 5.34 8.00 8.00 8.00 12.2 12.9 13.8 14.6 15.1 16.5 17.6 19.2 21.1 24.0 24.9 26.6 HARDWARE Part Number 3/8FWSS6 SFHN3/8SS6 Dura Clean™ • Material: 316 Stainless Steel • Flat washer for 3/8” threaded rod • Serrated hex nut for 3/8”-16 threaded rod • Weight/C: Flat Washers 1.7 Lbs. (0.77kg) Serrated Hex Nuts 3.0 Lbs. (1.36kg) Description 3/8” Flat Washer 3/8”-16 Serrated Hex Nut Reference page 144 for general fitting and standard finish specifications. 147 Dura Clean™ Accessories NEW TREADED ROD • Material: Steam cleaned 304 Stainless Steel • Standard Lengths: 36” (.92m) & 72” (1.83m) (other length available upon request) • 3/8”-16 cut threads standard • Cut threads allow the customer to cut rods to length and then field cut threads where required Length 3/8”-16 Cut Thread (both ends) 3” Channel Length in. 3” 3/8” (9.5mm) (76mm) Threads Per Inch mm (76mm) Recommended Load lbs. N Wt./100 pcs lbs. kg DCR38-36 36” 914 16 730 324 186.2 84.4 DCR38-72 72” 1829 16 730 324 372.4 168.9 Dura Clean™ SPACERS • Material: 304 Stainless Steel • Spacers are used to provide 1” (25mm) of separation from wall to channel, eliminating any area that may harbor bacteria. • Weight/C: 16.9 Lbs. (7.6kg) 1.000” OD 1” (25mm) (25mm) .440” ID Part Number Description DCSP SS4 Stand-off Spacer (11mm) Reference page 144 for general fitting and standard finish specifications. 148 Dura Clean™ Accessories Other Stainless Steel Products B135 Flat Corner Plate B102 3-Hole Corner Angle B104 4-Hole Corner Angle B154 2-Hole 45° Open Angle B155 2-Hole ‘U’ Support B107 5-Hole 45° Closed Angle B172 4-Hole Splice Clevis B280SQ Post Base B121 8-Hole Double Corner Connection B123 12-Hole Triple Wing Connection Consult Customer Service for other products that can be made in Stainless Steel material Dura Clean™ 149 Electrical Accessories A complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. B-Line’s surface raceways are U.L. listed and meet the requirements of the National Electrical Code, Article 352. Surface Raceways B-Line’s channel provides structural support in addition to a raceway system. For U.L. wire fill see chart on page 218-219. Cable Supports A full range of clamps and saddles are offered in porcelain, thermoplastic elastomer and maple. B-Line’s maple clamps, Insulclamp® cable clamps and porcelain saddles are furnished complete with steel clamps (electro-plated) and Everdur hardware where required. Materials & Finishes* Steel products are made from low carbon steel strips or plates. Porcelain saddles and clamps are made by dry process and white glazed (porcelain dielectric strength is 50 volts per mil). Maple clamps are made from kiln-dried maple wood, paraffin impregnated. Finish Code PLN Finish Plain ZN GRN GALV YZN Electro-Plated Zinc Dura-Green Pre-Galvanized Yellow Zinc Chromate Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC3 Type III ASTM B653 ASTM B633 SC3 Type II *Unless otherwise noted. Design Load Design load data published includes a Safety Factor of 3.0 (Safety Factor = Ratio of ultimate load to the design load). U.L. listed raceway channels: B11, B11KO6 B12, B12KO6 B22, B22KO6 B24, B24KO6 B26, B26KO6 B32, B32KO6 B42, B42KO6 B52, B52KO6 B54, B54KO6 B56, B56KO6 U.L. File No. E29637 In all cases, the snap-in closure strip is required to complete raceway enclosure. Metric Electrical Accessories Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 150 Electrical Accessories (9) (7) (11) (8) (1) (5) (4) (13) (1) (1) or (1A) (Not Shown) (6) (10) (13) (3) or (3A) (Not Shown) SELECTION CHART Channel Number Depth (2) 1 Channel Hanger 1A 2 3 3A 4 5 Channel Hanger Fixture Hanger End Cap Connection End Cap Internal Straight Splice Internal Tee Splice B392-22** B285 B392-11** B392-12** B766-22 (2) B768-22 (2) B766-11 B766-12 B768-11 B768-12 B392-22** B766-22 B768-22 B392-22** – – B206 B392-32** B766-32 B768-32 B203 – B766-42 B768-42 B220 or B283 B204 or B284 – B766-52 B768-52 – – B766-56 – B22A 31/4” (82.5) B616-22A* B241S* B616S-22A* B205 or B285 B11 B12 B22 B24 B26 31/4” 27/16” (82.5) B616-22A* B241S* B241S* 15/8” (41.3) B616* B216S* 15/8” (41.3) B616* – B222 B221 B205 or B285 B223 or B286 – B32 13/8” (34.9) B616* B216S* B42 1” (25.4) B616* B215S* B52 B54 13/16” (20.6) B616* B215S* B56 13/16” (20.6) B616* B215S* B616S-22A* B616S-22A* B616S* B616TG* – B616S* B616TG* B616S* B616TG* B616S* B616TG* B616S* B616TG* (61.9) B616-22A* *Specify Hanger Rod or Conduit Size. **Specify Conduit Size OTHER ITEMS SHOWN ON ILLUSTRATION (6) B351L B217-20 B465 Beam Clamp (10) B750 H.I.D. Fixture Hanger Beam Clamp B755 Beam Clamp (11) B447 B447A Conduit Connection Plate (8) B751 Beam Clamp (12) B719 B718 Series Junction Box Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 151 (9) (13) Electrical Accessories Snap-in Closure Strip (7) Fluorescent Fixture Hangers B616-9/16 B616-7/8 •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR 9/16” (14.3) DIA. FOR •Material: 16 Gauge (1.5) 1/2” ATR •Standard finish: ZN •Wt./C 25 Lbs. (11.3 kg) 11/2” •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Material: 16 Gauge (1.5) •Standard finish: ZN •Wt./C 25 Lbs. (11.3 kg) CHANNEL HANGER CHANNEL HANGER 7/8” (22.2) DIA. FOR 1/2” (15) CONDUIT 11/2” (38.1) (38.1) 31/8” 31/8” (79.4) (79.4) B616S-9/16 B616S-7/8 •Design Load 150 Lbs. (.67 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Allows more than 1/2” (12.7) space between channel and fixture •Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR •Material:16 Gauge (1.5) •Standard finish: ZN 11/2” •Wt./C 30 Lbs. (13.6 kg) (38.1) •Design Load 150 Lbs. (.67 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Allows more than 1/2” (12.7) space between channel and fixture •Standard finish: ZN •Wt./C 30 Lbs. (13.6 kg) FLUORESCENT FIXTURE HANGER WITH STUD 11/2” (38.1) 31/8” 31/8” (79.4) (79.4) B616-22A-9/16 B616-22A-7/8 •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR •Material: 14 Gauge (1.9) •Standard finish: ZN •Wt./C 44 Lbs. (19.9 kg) •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Material: 14 Gauge (1.9) •Standard finish: ZN •Wt./C 44 Lbs. (19.9 kg) CHANNEL HANGER Electrical Accessories FLUORESCENT FIXTURE HANGER WITH STUD 11/2” CHANNEL HANGER 9/16” (14.3) DIA. FOR 1/2” ATR 11/2” 7/8” (22.2) DIA. FOR 1/2” (15) CONDUIT (38.1) (38.1) 51/8” (130.2) 51/8” (130.2) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 152 Fluorescent Fixture Hangers B616S-22A-9/16 B616S-22A-7/8 •Design Load 150 Lbs. (.67 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR •Allows more than 1/2” (12.7) space 11/2” between channel and fixture (38.1) •Material: 14 Gauge (1.9) •Standard finish: ZN •Wt./C 49 Lbs. (22.2 kg) 1 •Design Load 150 Lbs. (.67 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Allows more than 1/2” (12.7) space between channel and fixture •Material: 14 Gauge (1.9) 11/2” •Standard finish: ZN (38.1) •Wt./C 49 Lbs. (22.2 kg) FLUORESCENT FIXTURE HANGER WITH STUD FLUORESCENT FIXTURE HANGER WITH STUD 51/8” (130.2) 5 /8” (130.2) B215S B616TG-9/16 FLUORESCENT FIXTURE HANGER FOR 1/2” (15) KNOCKOUT CHANNEL HANGER 9/16” (14.3) DIA. FOR 1/2” ATR •Design Load 150 Lbs. (.67 kN) •Safety Factor of 3 11/2” •Maximum design load (38.1) 50 Lbs. (.22 kN) when used as a fixture support •Includes: 31/8” 2 pcs. 3/8” Flat Washers for (79.4) use with 3/8” ATR •Design Load 150 Lbs. (.67 kN) •Allows more than 1/2” (12.7) space between channel and fixture •Material: 16 Gauge (1.5) •Standard finish: ZN •Wt./C 32 Lbs. (14.5 kg) •Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •For use with B42, B52, B54 & B56 Channels •Hardware included: One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW for use with 1/2”-13 ATR One (1) 5/8” FW for use with 3/8” conduit 7/8” (22.2) DIA. •Material: 16 Gauge (1.5) •Standard finish: ZN •Wt./C 31 Lbs. (14.0 kg) 23/16” (55.6) 121/32” (42.0) B216S B241S •Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •For use with B22, B24, B26 & B32 Channels •Hardware included: One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW for use with 1/2”-13 ATR One (1) 5/8” FW for use with 3/8” conduit •Material: 16 Gauge (1.5) •Standard finish: ZN 7/8” (22.2) DIA. •Wt./C 38 Lbs. (17.2 kg) •Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •For use with B11 & B12 Channels. •Hardware included: One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW for use with 1/2”-13 ATR One (1) 5/8” FW for use with 3/8” conduit •Material: 16 Gauge (1.5) 7/8” (22.2) DIA. •Standard finish: ZN •Wt./C 47 Lbs. (21.3 kg) 31/2” 51/16” (88.9) (128.6) CHANNEL HANGER CHANNEL HANGER (42.0) (42.0) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 153 Electrical Accessories 121/32” 121/32” Fluorescent Fixture Hangers B390S B390BX •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Maximum design load 50 Lbs. (.22 kN) when used as a fixture support •Swings 15° in 360° plane •Includes: 2 pcs. SN224-3/4”WO Stud Nut 2 pcs. 1/4”-20 Square Nut 1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer •Standard finish: ZN •Wt./C 71 Lbs. (32.2 kg) •Design Load 250 Lbs. (1.11 kN) for Connector Fitting only •Safety Factor of 3 •Design Load 50 Lbs. (.22 kN) when used as illustrated or for use as a fixture support •Swings 15° in 360° plane •Includes: 1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer •Fits on 4” box •Standard finish: ZN •Wt./C 55 Lbs. (24.9 kg) B465 B436 •Design Load 250 Lbs. (1.11 kN) •Safety Factor of 3 •Swings 15° in 360° plane •Includes: 1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer •Standard finish: ZN •Wt./C 95 Lbs. (43.1 kg) 21/16” •Standard finish: ZN •Wt./C 2 Lbs. (.9 kg) 360° SWIVEL CHANNEL CONNECTOR 360° SWIVEL BOX CONNECTOR H.I.D. FIXTURE HANGER FLUORESCENT FIXTURE NUT 21/8” (54.0) TAPPED FOR 1/4”-20 SCREW B436S (52.4) FLUORESCENT FIXTURE STUD NUT 33/4” (95.2) B464 B460 FLUORESCENT FIXTURE HANGER Electrical Accessories •Hanger is shipped flat and requires field bending as shown •Allows more than 1/2” (12.7) space between channel and fixture •Material: 18 Gauge (1.2) •Standard finish: ZN •Bolt size: 1/4” x 11/4” •Standard finish: ZN •Wt./C 4 Lbs. (1.8 kg) •Design Load 250 Lbs. (1.11 kN) Safety Factor of 3 1/4” x 1” ROUND HEAD MACHINE SCREW AND SQUARE NUT INCLUDED A 9/32” (7.1) FLUORESCENT FIXTURE HANGER •Hanger is shipped flat and requires field bending as shown •Allows more than 1/8” (3.2) space between channel and fixture •Material: 18 Gauge (1.2) •Standard finish: ZN For Channel Size B460-22 B460-12 B460-11 B22, B24, B26, B32 B12 B11 (31.7) 1/4” x 1” ROUND HEAD MACHINE SCREW AND SQUARE NUT INCLUDED A 1/4” x 3/4” CARRIAGE BOLT AND SQUARE NUT INCLUDED 15/8” 15/8” (41.3) (41.3) SQUARE HOLE Part No. 11/4” Wt./C Lbs. kg 21/8” (57.5) 17 (7.7) 15 2 /16” (79.5) 20 (9.1) 33/4” (101.6) 23 (10.4) Part No. For Channel Size B464-32 B464-22 B464-12 B464-11 B32 B22, B24, B26 B12 B11 A A 11/2” 13/4” 29/16” 33/8” (40.6) (47.4) (66.0) (91.4) Wt./C Lbs. kg 17 (7.7) 18 (8.1) 21 (9.5) 24 (10.9) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 154 Electrical Accessories B217-20 B217P B217-24 •Refer to Raceway Fill Chart Pg. 214-215 •Material: 20 Gauge (.9) •Standard finishes: GRN, GALV, YZN •Standard length: 120” (3.05m) •Wt./CFT 36 Lbs. (16.3 kg) •Refer to Raceway Fill Chart Pg. 214-215 •Standard finishes: Green (GRN) or Gray (GRY) Plastic •Standard length: 120” (3.05m) •Wt./CFT 9.2 Lbs. (4.2 kg) •Refer to Raceway Fill Chart Pg. 214-215 •For use with 7 or fewer conductors no larger than #12 AWG •Material: 24 Gauge (.6) •Standard finishes: GRN, GALV, YZN •Standard length: 120” (3.05m) •Wt./CFT 28 Lbs. (12.7 kg) SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS PLASTIC SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS 17/16” 113/32” (36.5) (35.7) 17/16” (36.5) 15/32” 19/32” 1/2” (15.1) (11.9) (12.7) 5/8” 9/32” (15.9) (7.1) B516 B516S •Provided with #10-32 tapped hole for grounding strap •Duplex cover plate included •Receptacle not furnished •Requires ground wire installation for use with UL listed channel raceway system •Standard finish: GALV •Wt./C 72 Lbs. (32.6 kg) 7 •Duplex cover plate included •Receptacle not furnished •Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts 17/8” •Standard finish: ZN (47.6) 1 •Wt./C 98 Lbs. (44.4 kg) 4 /16” 1 SNAP-IN OUTLET BOX 41/16” OUTLET BOX 1 /8” 2 /8” (103.2) (54.0) (47.6) (103.2) 21/8” (54.0) 1/2” (15) & 3/4” (20) CONCENTRIC KO’S 1/2” (12.7) x 2” (25.4) SLOT 1/2” (15) & 3/4” (20) 1/2” (12.7) x 2” (25.4) SLOT 6” CONCENTRIC KO’S (152.4) 15/8” B217-20 CLOSURE STRIP (41.3) 4” (101.6) B283 THRU B286 B203 THRU B206 B220 THRU B223 A X TYPE END CAPS •Material: 12 Gauge (2.6) •Standard finishes: ZN, GRN, HDG, SS4 Part No. B42 B54 B22 B32 B52 B12 B11 B24 1.015” .827” 1.640” 1.390” .827” 2.452” 3.265” 1.640” (25.8) (21.0) (41.6) (35.3) (21.0) (62.3) (82.9) (41.6) Wt./C Lbs. kg 6 (2.7) 5 (2.2) 10 (4.5) 8 (3.6) 4 (1.8) 15 (6.8) 20 (9.1) 10 (4.5) •Material: 12 Gauge (2.6) •Standard finishes: ZN, GRN A B Part No. B283 B284 B285 B286 Use With B52 B54 & B56 B22 B24 & B26 A 119/32” 119/32” 119/32” 119/32” B (40.5) 25/32” (19.8) (2.7) (40.5) 25/32” (19.8) (40.5) 119/32” (40.5) (2.7) 6 6 13 (40.5) 119/32” (40.5) 14 Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 155 Wt./C Lbs. kg (5.9) (6.3) Electrical Accessories B203 B204 B205 B206 B220 B221 B222 B223 A Use With END CAPS Electrical Accessories B447 B447A •Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts •Material: 16 Gauge (1.5) 2 HOLES •Standard finish: ZN 9/32” (7.1) DIA. •Wt./C 35 Lbs. (15.9 kg) •Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts •Material: 16 Gauge (1.5) 2 HOLES •Standard finish: ZN •Wt./C 35 Lbs. (15.9 kg) 9/32” (7.1) DIA. CONDUIT CONNECTION PLATE FOR 1/2” (15) CONDUIT 7/8” (22.2) DIA. CONDUIT CONNECTION PLATE FOR 3/4” (20) CONDUIT 5/8” (15.9) 13/32” (27.8) DIA. 5/8” (15.9) 51/8” (130.2) 51/8” (130.2) B392-32 SERIES B392-22 SERIES •Includes: 1 pc. 1/4”-20 Square Nut 1 pc. B436S Fixture Stud Nut •Material: 11 Gauge (3.0) •Standard finish: ZN •Includes: 15/8” 1 pc. 1/4”-20 Square Nut (41.3) 1 pc. B436S Fixture Stud Nut •Material: 11 Gauge (3.0) 15/8” •Standard finish: ZN (41.3) CONNECTION END CAP CONNECTION END CAP 15/8” (41.3) 9/32” (7.1) DIA. A DIA. 13/8” (34.9) 9/32” (7.1) DIA. A DIA. 3/4” (19.0) 3/4” (19.0) Part No. B392-32-1/2 B392-32-3/4 A 7/8” (22.2) 11/16” (27.0) Conduit Size 1/2” (15) 3/4” (20) Part No. B392-22-1/2 B392-22-3/4 B392-22-1 Wt./C Lbs. kg 20 (9.1) 19 (8.6) Wt./C Conduit Size Lbs. kg 7/8” 1/2” (15) (22.2) 21 (9.5) 1 3/4” (20) 1 /16” (27.0) 20 (9.1) 1” PIPE THREAD 1” (25) 17 (7.7) A B392-12 SERIES B392-11 SERIES •Includes: 1 pc. 1/4”-20 Square Nut 1 pc. B436S Fixture Stud Nut •Material: 11 Gauge (3.0) •Standard finish: ZN •Includes: 1 pc. 1/4”-20 Square Nut 1 pc. B436S Fixture Stud Nut •Material: 11 Gauge (3.0) 15/8” •Standard finish: ZN (41.3) CONNECTION END CAP CONNECTION END CAP 15/8” (41.3) 27/16” 9/32” (7.1) DIA. A DIA. 31/4” (61.9) 9/32” (7.1) DIA. A DIA. (82.5) 3/4” 3/4” (19.0) Electrical Accessories (19.0) Part No. B392-12-1/2 B392-12-3/4 B392-12-1 Wt./C Conduit Size Lbs. kg 7/8” 1/2” (22.2) (15) 27 (12.2) 3/4” 11/16” (22.7) (20) 26 (11.8) 1” PIPE THREAD 1” (25) 23 (10.4) A Part No. B392-11-1/2 B392-11-3/4 B392-11-1 A Conduit Size 7/8” 1/2” (22.2) (15) 3/4” 11/16” (27.0) (20) 1” PIPE THREAD 1” (25) Wt./C Lbs. kg 36 (16.3) 33 (14.9) 32 (14.5) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 156 Junction Boxes B718 UNIVERSAL JUNCTION BOX •Assemble B719 Hubs into B718 square knockouts •Designed for use with B22, B24 & B26 Channel •B718 Includes: 1 pc. Junction Box only 1 pc. Cover only 2 pcs. #10-20 Round Head Machine Screws •Standard finish: ZN •Wt./C 180 Lbs. (81.6 kg) Part No. B718-1 B718-2 B718-3 B718-4 Includes 1 B718 & 1 B719 1 B718 & 2 B719 1 B718 & 3 B719 1 B718 & 4 B719 B718-1 B718-2 B718-2 B718-1 B718-2 B718-2 END THRU BOX 90° B718-3 B718-3 TEE B718-4 B718-4 CROSS SELECTION GUIDE Wt./C Lbs. kg 205 (93.0) 230 (104.3) 255 (115.6) 280 (127.0) Box Dimension: 21/2” Deep x 51/8” Square B719AL UNIVERSAL JUNCTION BOX HUB •B719AL Includes: 1 pc. B719AL Hub only 1 pc. B436S Fixture Stud Nut 1 pc. 1/4”-20 Square Nut 2 pcs. #10-24 Self Tapping Screws 2 pcs. Rubber Caps •Material: Aluminum •Wt./C 25 Lbs. (11.3 kg) B518-1 THRU B518-4 UNIVERSAL JUNCTION BOX AND HUBS •Channel Connection Kits as shown in the chart above •Includes: 1 pc. Junction Box with Screws 1 pc. Box Cover •Standard finish: ZN B518-1 END B518-2 THRU BOX B518-2 90° B518-3 TEE B518-4 CROSS SELECTION GUIDE Part No. B518-1 B518-2 B518-3 B518-4 Channel Connection Kits Included 1 2 3 4 Wt./C Lbs. kg 106 (48.1) 137 (62.1) 162 (78.5) 192 (87.1) CHANNEL CONNECTION KIT 3/4” (19.1) CONDUIT KNOCKOUTS Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 157 Electrical Accessories •For use with B22, B24 & B26 Channels. •Box Dimension: Standard 4” Octagon Box •Includes: 1 pc. B392-22-3/4 End Connection (See page 156) 1 pc. 3/4” (20) Insulated Chase Nipple 1 pc. 3/4” (20) Lock Nut •Standard finish: ZN Strut Joiners B766 SERIES B767 SERIES •Includes: 2 Cam Screws •Material: 12 Gauge (2.6) •Standard finish: ZN •Includes: 2 Cam Screws •Material: 12 Gauge (2.6) •Standard finish: ZN STRAIGHT STRUT JOINER 90° ELBOW STRUT JOINER Note: B767-22 (Cast Aluminum Fitting) does not require miter cutting of channel as shown in drawing. 41/2” (114.3) 7/8” 25/16” (58.7) (22.2) Part No. B766-11 B766-12 B766-22 * B766-26 B766-32 B766-42 B766-52 B766-56 For Channel Size B11 B12 B22 & B24 B26 B32 B42 B52 & B54 B56 Wt./C Lbs. kg 94 (42.6) 72 (32.6) 50 (22.7) 53 (24.0) 44 (19.9) 34 (15.4) 28 (12.7) 31 (14.0) Part No. B767-11 B767-12 B767-22 * B767-26 B767-32 B767-42 B767-52 B767-56 For Channel Size B11 B12 B22 & B24 B26 B32 B42 B52 & B54 B56 B768 SERIES B769 SERIES •Includes: 3 Cam Screws •Patented •Material: 12 Gauge (2.6) •Standard finish: ZN •Includes: 4 Cam Screws •Patented •Material: 12 Gauge (2.6) •Standard finish: ZN TEE STRUT JOINER 25/16” (58.7) Wt./C Lbs. kg 74 (33.5) 56 (25.4) 39 (17.7) 41 (18.6) 34 (15.4) 27 (12.2) 23 (10.4) 25 (11.3) CROSS STRUT JOINER 41/2” (114.3) 41/2” (114.3) 31/16” (77.8) Electrical Accessories 41/2” (114.3) Part No. B768-11 B768-12 B768-22 * B768-26 B768-32 B768-42 B768-52 B768-56 For Channel Size B11 B12 B22 & B24 B26 B32 B42 B52 & B54 B56 Wt./C Lbs. kg 142 (64.4) 112 (50.8) 79 (35.8) 79 (35.8) 72 (32.6) 62 (28.1) 57 (25.8) 60 (27.2) Part No. B769-11 B769-12 B769-22 * B769-26 B769-32 B769-42 B769-52 B769-56 For Channel Size B11 B12 B22 & B24 B26 B32 B42 B52 & B54 B56 Wt./C Lbs. kg 148 (67.1) 120 (54.4) 87 (39.4) 93 (42.2) 78 (35.4) 65 (29.5) 58 (26.3) 62 (28.1) * Cast Aluminum parts Note: Strut joiners are not for structural support. A channel support is recommended within 24” (609 mm) of each joint. Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 158 Strut Joiners B166 B166-46 71/4” (184.1) FOUR HOLE SPLICE CLEVIS FOUR HOLE SPLICE CLEVIS ASSEMBLY •Includes: 1 Splice Clevis 4 pcs. 1/4”-20 Flat Head Machine Screws 4 pcs. N224WO Channel Nuts •Material: 16 Gauge Part No. A B166-11 B166-12 B166-22 B166-32 B166-42 B166-52 31/4” 27/16” 15/8” 13/8” 1” 13/16” (82.5) (61.9) (41.3) (34.9) (25.4) (20.6) 71/4” (184.1) •Requires ground wire for use with UL listed channel raceway system •Includes: 1 Splice Clevis 1 pc. B466W tapped plate 4 pcs. 1/4”-20 Flat Head Machine Screws •Material: 16 Gauge (1.5) •Standard finishes: ZN, GRN A 111/16” (42.9) For Channel Size Wt./C Lbs. kg Part No. B11 B12 B22, B24, B26 B32 B42 B52, B54, B56 128 108 91 83 75 71 B166-46-11 B166-46-12 B166-46-22 B166-46-32 B166-46-42 B166-46-52 (58.0) (49.0) (40.3) (37.6) (34.0) (32.2) A 31/4” 27/16” 15/8” 13/8” 1” 13/16” A 111/16” (42.9) For Channel Size (82.5) (61.9) (41.3) (34.9) (25.4) (20.6) B11 B12 B22, B24, B26 B32 B42 B52, B54, B56 Wt./C Lbs. kg 118 98 79 73 65 61 (53.5) (44.4) (35.8) (33.1) (29.5) (27.6) B166CL B466W B466S •Use to cover gap between strut •Material: 18 Gauge (1.2) •Standard finish: ZN •Wt./C 4 Lbs. (1.8 kg) •Includes: 4 pcs. 1/4”-20 Flat Head Machine Screws •Material: 14 Gauge (1.9) •Standard finish: ZN •Wt./C 27 Lbs. (12.2 kg) •Holes 13/16” (20.6) from ends and 17/8” (47.6) on centers •Includes: 4 pcs. 1/4”-20 Square Nuts •Material: 14 Gauge (1.9) •Standard finish: ZN •Wt./C 34 Lbs. (15.4 kg) •Studs 13/16” (20.6) from ends and 17/8” (47.6) on centers B393-1 B589 •Requires ground wire for use with UL listed channel raceway system •1/2” (15) pipe threads •Material: Cast Aluminum •Wt./C 6 Lbs. (2.7 kg) •Can be used with B393-1 wiring stud •Material: 12 Gauge (2.6) •Standard finish: ZN •Wt./C 29 Lbs. (13.1 kg) TAPPED SPLICE PLATE SPLICE CLEVIS CLIP STUD SPLICE PLATE B166 1” (25.4) 125/32” (45.2) B619 KNOCK-OUT PLATE •Requires ground wire for use with UL listed channel raceway system •Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts •Material: 16 Gauge (1.5) 1/2” (15) Conduit Knockouts •Standard finish: ZN •Wt./C 40 Lbs. (18.1 kg) 61/4” (158.7) WIRING STUD SPACER CLEVIS 9/32” (7.1) DIA. HOLES 7/8” (22.2) DIA. THREADS (50.8) 4” (101.6) 11/8” 121/32” (28.6) (42.0) 1/2” (12.7) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 159 Electrical Accessories 2” 1/2” (15) PIPE Electrical Hardware B446 B446A •Design Load: (3/8)-730 Lbs. (3.24 kN) (1/2)-1350 Lbs. (6.00 kN) •Safety Factor of 3 •Standard finish: ZN •Design Load: (3/8)-730 Lbs. (3.24 kN) (1/2)-1350 Lbs. (6.00 kN) •Safety Factor of 3 •Standard finish: ZN SWIVEL HANGER (FEMALE-MALE) SWIVEL HANGER (FEMALE ONLY) 23/4” A (69.8) A (25.4) 13/4” B Part No. B446-3/8 B446-1/2 R 1” A 3/8”-16 HN 1/2”-13 HN B 3/8”-16 HHCS 1/2”-13 HHCS (44.4) Wt./C Lbs. kg 28 (12.7) 36 (16.3) Part No. B446A-3/8 B446A-1/2 A 3/8”-16 HN 1/2”-13 HN B446B B446C •Design Load: (3/8)-730 Lbs. (3.24 kN) (1/2)-1350 Lbs. (6.00 kN) •Safety Factor of 3 •Standard finish: ZN •Design Load: (3/8)-730 Lbs. (3.24 kN) (1/2)-1350 Lbs. (6.00 kN) •Safety Factor of 3 •Standard finish: ZN SWIVEL HANGER (MALE ONLY) R 9/32” (7.1) 3/8” (9.5) SWIVEL HANGER (FEMALE-FEMALE) 13/4” 23/4” (44.4) (69.8) A R Part No. B446B-3/8 B446B-1/2 B 3/8”-16 HHCS 1/2”-13 HHCS B R 9/32” (7.1) 3/8” (9.5) A Wt./C Wt./C Lbs. kg 16 (7.2) 20 (9.1) Part No. B446C-3/8 B446C-1/2 B590 B617 •Installation aid for retaining wires before installing snap closure strip •Wt./C 1 Lb. (.4 kg) •Standard finish: ZN •Wt./C 6 Lbs. (2.7 kg) FIBER WIRE RETAINER Electrical Accessories Wt./C Lbs. kg 13 (5.9) 15 (6.8) A 3/8”-16 HN 1/2”-13 HN Lbs. 26 31 SHOULDER BOLT 2” (50.8) 13/8” 11/2” 3/8”-16 THREAD SIZE (34.9) (38.1) 1/32” (.8) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 160 kg (11.8) (14.0) Insulclamp® Clamps B4060 THRU B4093 INSULCLAMP® CABLE CLAMPS (Replaces porcelain clamps) • Assembly includes: 1 Insulclamp® & 1 pr. zinc plated Pipe Straps with Everdur (Silicon Bronze) Hardware • The thermoplastic elastomer Insulclamp has a dielectric strength of 640 volts/mil • The flame retardant one piece design allows for trouble free assembly • Everdur hardware is non-ferrous and prevents magnetic induction HOLE DIA. New & Improv ed A B Part No. 3/8” (9.5) 1/2” (12.7) 5/8” (15.9) 3/4” (19.0) 7/8” (22.2) 1” 11/8” 11/4” 13/8” 11/2” 15/8” 13/4” 17/8” 2” 21/8” 21/4” 23/8” 21/2” 25/8” 23/4” 27/8” 3” 31/8” 31/4” 33/8” 31/2” 35/8” 33/4” 37/8” 4” 41/8” 41/4” 43/8” 41/2” (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) (60.3) (63.5) (66.7) (69.8) (73.0) (76.2) (79.4) (82.5) (85.7) (88.9) (92.1) (95.2) (98.4) (101.6) (104.8) (107.9) (111.1) (114.3) Clamp No. Wt./C Lbs. kg 25 25 25 37 37 37 37 58 58 58 58 76 76 76 76 90 90 90 90 109 109 109 109 130 130 130 130 160 160 160 160 160 160 160 A B (included) (11.3) (11.3) 1.36” (34.5) .56” (14.2) B2030 1.86” (47.2) .81” (20.8) B2034 2.36” (59.9) 1.06” (26.9) B2038 2.86” (72.6) 1.31” (33.3) B2042 3.36” (85.3) 1.56” (39.6) B2046 3.86” (98.0) 1.81” (46.0) B2050 4.36” (110.7) 2.06” (52.3) B2054 4.86” (123.4) 2.31” (58.7) B2058 5.24” (133.1) 2.50” (63.5) B2018 (11.3) (16.8) (16.8) (16.8) (16.8) (26.3) (26.3) (26.3) (26.3) (34.5) (34.5) (34.5) (34.5) (40.8) (40.8) (40.8) (40.8) (49.4) (49.4) (49.4) (49.4) (58.9) (58.9) (58.9) (58.9) (72.6) (72.6) (72.6) (72.6) (72.6) (72.6) (72.6) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 161 Electrical Accessories B4060 B4061 B4062 B4063 B4064 B4065 B4066 B4067 B4068 B4069 B4070 B4071 B4072 B4073 B4074 B4075 B4076 B4077 B4078 B4079 B4080 B4081 B4082 B4083 B4084 B4085 B4086 B4087 B4088 B4089 B4090 B4091 B4092 B4093 Hole Dia. Porcelain & Maple Clamps B4050 & B4051 B4094 & B4095 • Electrical porcelain has an dielectric strength of 50 volts/mil • Electrical porcelain has an dielectric strength of 50 volts/mil • Designed for use with B449 Brackets PORCELAIN CABLE CHANNEL SADDLE PORCELAIN CABLE RACK SADDLE x R x A A 3” 21/4” (76.2) (57.1) Part No. A B4050 B4051 3” 4” R 13/8” 21/8” (76.2) (101.6) (34.9) (54.0) R Wt./C Lbs. kg Part No. 72 100 B4094 B4095 (32.6) (45.3) B4035A THRU B4035F A 27/8” 37/8” Wt./C Lbs. kg R (73.0) (98.4) 13/8” 21/8” 67 (34.9) (30.4) (54.0) 106 (48.1) B4037B 1/4” (6.3) x 4” (101.6) 4” (101.6) BUS BAR MAPLE CLAMPS BUS BAR SEPARATOR • Wt./C 9 Lbs. (4.1 kg) • Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 3 pcs. 1/2” Flat Washers 3 pcs. N225WO 3 pcs. SQN-1/2” 3 pcs. ATR-1/2 x L (Length) • Required number of Separators • 1/4” (6.3) x 2” (50.8) and 1/4” (6.3) x 6” (152.4) Bus Bar Maple Clamps available 47/16” (112.7) 15/8” (41.3) A 31/2” (88.9) 1/4” (6.3) C Electrical Accessories B Part No. B4035A B4035B B4035C B4035D B4035E B4035F A 73/8” B (187.3) 81/2” 91/2” 101/2” 111/2” 121/2” 131/2” C (215.9) 1/4” (6.3) (241.3) 3/4” (19.0) (266.7) 11/4” 13/4” 21/4” 23/4” (31.7) (292.1) (317.5) (342.9) (44.4) (57.1) (69.8) No. of Bus Separators No. of Bars Per Leg – 2 4 6 8 10 1 2 3 4 5 6 Wt./C Lbs. kg 416 447 479 511 542 574 (188.7) (202.7) (217.3) (231.8) (245.8) (260.3) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 162 Maple Clamps B4000 THRU B4007 MAPLE CABLE CLAMPS • Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze) • Everdur hardware is non-ferrous and prevents magnetic induction SPECIFY HOLE DIA. Note: Maple cable clamps may be replaced with Insulclamps® see page 161 for sizes Part No. B4000 B4001 B4002 B4003 B4004 B4005 B4006 B4007 Specify Hole Dia. 0” to 5/8” 1/2” to 1” 3/4” to 11/2” 11/4” to 13/4” 11/2” to 21/4” 2” to 21/2” 21/4” to 3” 3” to 4” A Clamp No. Wt./C (included) Lbs. kg B (0.0 to 15.9) 111/32” (34.1) 2” (12.7 to 25.4) 129/32” (48.4) 225/32” (19.0 to 38.1) 23/8” (60.3) 39/32” (31.7 to 44.4) 27/8” (73.0) 33/4” 1 (38.1 to 57.1) 3 /2” (88.9) 43/8” (50.8 to 63.5) 4” (101.6) 47/8” (38.1 to 76.2) 41/2” (114.3) 53/8” (76.2 to 101.6) 59/16” (141.3) 67/16” (50.8) (70.6) (83.3) (95.2) (111.1) (123.8) (136.5) (163.5) B2010 B2012 B2013 B2014 B2015 B2016 B2017 B2019 24 44 58 66 86 110 125 165 (10.9) (19.9) (26.3) (29.9) (39.0) (49.9) (56.7) (74.8) B4008 THRU B4017 B A SPECIFY HOLE DIA. SQUARE MAPLE CABLE SADDLE • Assembly Includes: 1 Maple Saddle (Paraffin Impregnated) 1 pc. 3/8”-16 Flat Head Machine Screw 1 pc. N228 Channel Nut • Other sizes available 15/8” (41.3) Specify Hole Dia. Part No. B4008 B4009 B4010 B4011 B4012 B4013 B4014 B4015 B4016 B4017 B 0” to 1” 1” to 11/2” 11/2” to 2” 2” to 21/2” 21/2” to 3” 3” to 31/2” 31/2” to 4” 4” to 41/2” 41/2” to 5” 5” to 6” (0.0 to 25.4) (25.4 to 38.1) (38.1 to 50.8) (50.8 to 63.5) (63.5 to 76.2) (76.2 to 88.9) (88.9 to 101.6) (101.6 to 114.3) (114.3 to 127.0) (127.0 to 152.4) A 3” 31/2” 4” 41/2” 5” 51/2” 6” 7” 71/2” 9” B (76.2) (88.9) (101.6) (114.3) (127.0) (139.7) (152.4) (177.8) (190.5) (228.6) A Wt./C Lbs. kg 13/4” (44.4) (50.8) 2” 21/4” (57.1) 21/2” (63.5) 23/4” (69.8) (76.2) 3” 31/4” (82.5) 33/4” (95.2) (101.6) 4” (127.0) 5” 35 42 53 62 76 85 95 105 115 126 (15.9) (19.0) (24.0) (28.1) (34.5) (38.5) (43.1) (47.8) (52.4) (57.1) B4033A THRU B4033I 15/8” MAPLE CABLE CLAMPS (41.3) • Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 2 pcs. 3/8”-16 Stud Bolts 2 pcs. 3/8”-16 Flat Washers 2 pcs. 3/8”-16 Square Nuts 2 pcs. N228 Channel Nuts • Other sizes available Part No. Specify Hole Dia. 0” to 1” 1” to 11/2” 11/2 to 2” 2” to 21/2” 21/2” to 3” 3” to 31/2” 31/2” to 4” 4” to 41/2” 41/2” to 5” (0.0 to 25.4) (25.4 to 38.1) (38.1 to 50.8) (50.8 to 63.5) (63.5 to 76.2) (76.2 to 88.9) (88.9 to 101.6) (101.6 to 114.3) (114.3 to 127.0) Wt./C Lbs. kg A 31/2” 4” 41/2” 51/2” 6” 61/2” 7” 71/2” 8” (88.9) (101.6) (114.3) (127.0) (152.4) (165.1) (177.8) (190.5) (203.2) 85 95 118 162 187 209 248 270 298 SPECIFY HOLE DIA. A (38.5) (43.1) (53.5) (73.5) (84.8) (94.8) (112.5) (122.5) (135.2) Reference page 150 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 218 - 219. 163 Electrical Accessories B4033A B4033B B4033C B4033D B4033E B4033F B4033G B4033H B4033I A Aluminum & Stainless Steel Alum. & Stainless Steel Materials Aluminum Aluminum channels, fittings and accessories offer excellent corrosion resistance and are suitable for many indoor and outdoor applications. Aluminum’s high strength to weight ratio greatly reduces overall cost of installation through ease of handling and cutting. B-Line’s channels are extruded from aluminum alloy 6063-T6. Closure strips are extruded from aluminum alloy 6063-T5. Fittings and accessories are made from aluminum alloy 5052-H32. Stainless Steel Where corrosion problems persist and other material and fittings are ineffective, we recommend use of B-Line’s corrosion resistant stainless steel channels and accessories. Channels and fittings are available in two types of stainless steel: SS4-AISI Type 304 SS6-AISI Type 316 Fittings Most fittings, as shown in this catalog, can be supplied in aluminum or stainless steel. Consult factory for possible minimum production quantities and set-up charges. Load Data Aluminum Channel’s approximate load data can be determined by multiplying load data in the steel channel section of this catalog by a factor of 0.38. Stainless Steel Channel load data is the same as the data in the steel channel section of this catalog. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 164 Aluminum Channel & Closure Strips B22AL •Thickness: .105 (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: .86 Lbs./Ft. (1.28 kg/m) •Thickness: .105 (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: .66 Lbs./Ft. (0.98 kg/m) 27/16” 15/8” (61.9) (41.3) 15/8” 15/8” (41.3) (41.3) B22AAL B24AL •Thickness: .105 (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: 1.18 Lbs./Ft. (1.75 kg/m) •Thickness: .080 (2.0 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: .52 Lbs./Ft. (0.77 kg/m) 31/4” 15/8” (82.5) (41.3) 15/8” 15/8” (41.3) (41.3) B54AL B54AAL •Thickness: .080 (2.0 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: .37 Lbs./Ft. (0.55 kg/m) •Thickness: .080 (2.0 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: Aluminum •Weight: .57 Lbs./Ft. (0.84 kg/m) 13/16” 15/8” (20.6) (41.3) 15/8” 15/8” (41.3) (41.3) B217AL B217P B217FFAL •Standard Length: 10’ (304.8 cm) •Material: Aluminum •Weight: .15 Lbs./Ft. (0.23 kg/m) •Standard Length: 10’ (304.8 cm) •Material: PVC •Weight: .09 Lbs./Ft. (0.14 kg/m) •Standard Length: 10’ (304.8 cm) •Material: Aluminum •Weight: .16 Lbs./Ft. (0.24 kg/m) CLOSURE STRIP PLASTIC CLOSURE STRIP CLOSURE STRIP 17/16” (36.5) 5/8” (15.9) 17/16” 21/2” (36.5) (63.5) Reference page 164 for general fitting specifications.Other channel combinations available-see steel section for styles. 165 Alum. & Stainless Steel Materials B12AL Alum. & Stainless Steel Materials Aluminum SH TYPE CHANNEL KO6 TYPE KNOCKOUT CHANNEL •Material: Aluminum •Material: Aluminum 6” 2” TYP. (152.4) (50.8) 9/16” x 11/8” SLOTS (14.2) (28.6) 3” (76.2) 7/8” (22.2) DIA. KO H H Part No. B12SH AL B22SH AL B24SH AL B54SH AL Thickness .105 .105 .080 .080 (2.6) (2.6) (2.0) (2.0) Wt./C Lbs./Ft. kg/m H 27/16” (61.9) 15/8” (41.3) 15/8” (41.3) 13/16” (20.6) .83 .63 .49 .34 (1.23) (.93) (.73) (.50) Part No. Thickness B12KO6 AL B22KO6 AL B24KO6 AL B54KO6 AL .105 .105 .080 .080 (2.6) (2.6) (2.0) (2.0) Wt./C Lbs./Ft. kg/m H 27/16” 15/8” 15/8” 13/16” (61.9) (41.3) (41.3) (20.6) .86 .66 .52 .37 (1.28) (.98) (.77) (.55) B2000 SERIES H-17/8 TYPE CHANNEL RIGID CONDUIT CLAMPS •Material: Aluminum •Safety Factor of 5 •Machine Screw and Square Nut included •Pipe clamp material 5052-H32 Design Load 17/8” TYP. (47.6) 9/16” (14.2) DIA. HOLES H Part No. Thickness B12H17/8 AL B22H17/8 AL B24H17/8 AL B54H17/8 AL .105 .105 .080 .080 27/16” (2.6) 15/8” (2.0) 15/8” (2.0) 13/16” (2.6) Wt./C Lbs./Ft. kg/m H (61.9) (41.3) (41.3) (20.6) .86 .66 .52 .37 (1.28) (.98) (.77) (.55) Part No. B2007 AL B2008 AL B2009 AL B2010 AL B2011 AL B2012 AL B2013 AL B2014 AL B2015 AL B2016 AL B2017 AL B2018 AL B2019 AL B2020 AL Conduit or Pipe Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 1 1 /4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 41/2” (115) 5” (125) 6” (150) Material Thickness .063 (1.6) .063 (1.6) .080 (2.0) .080 (2.0) .080 (2.0) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) Design Load Lbs. kN 180 (.80) 180 (.80) 270 (1.20) 270 (1.20) 270 (1.20) 360 (1.60) 360 (1.60) 360 (1.60) 360 (1.60) 450 (2.00) 450 (2.00) 450 (2.00) 450 (2.00) 450 (2.00) Wt./C Lbs. kg 4 (1.8) 4 (1.8) 6 (2.7) 7 (3.2) 8 (3.6) 11 (5.0) 12 (5.4) 13 (5.9) 16 (7.2) 22 (10.0) 24 (10.9) 26 (11.8) 27 (12.2) 33 (14.9) Reference page 164 for general fitting specifications.Other channel combinations available-see steel section for styles. 166 Aluminum Alum. & Stainless Steel Materials ALUMINUM FITTINGS Most fittings, as shown in this catalog, can be supplied in aluminum. See “Fittings” section of this catalog. Consult factory for possible minimum production quantities and set-up charges. NUT WITHOUT SPRING SPRING NUT NUTS FOR B12 CHANNEL With Spring N724SS6 N728SS6 N725SS6 Part Number Without Spring N224WOSS6 N228WOSS6 N225WOSS6 Thread Size Wt./C Thickness 1/4”-20 1/4” (6.3) 3/8”-16 3/8” (9.5) 1/2”-13 3/8” (9.5) Lbs. kg 6.6 10.6 9.7 (3.0) (4.8) (4.4) NUTS FOR B22, B24 CHANNELS With Spring N224SS6 N228SS6 N225SS6 Part Number Without Spring N224WOSS6 N228WOSS6 N225WOSS6 Thread Size Wt./C Thickness 1/4”-20 1/4” (6.3) 3/8”-16 3/8” (9.5) 1/2”-13 3/8” (9.5) Lbs. kg 6.6 10.6 9.7 (3.0) (4.8) (4.4) NUTS FOR B54 CHANNEL With Spring N524SS6 N528SS6 N525SS6 Part Number Without Spring N224WOSS6 N228WOSS6 N525WOSS6 Thread Size Wt./C Thickness 1/4”-20 1/4” (6.3) 3/8”-16 3/8” (9.5) 1/2”-13 3/8” (9.5) Lbs. kg 6.6 10.6 9.7 (3.0) (4.8) (4.4) B-Line recommends the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength and slip resistance, use the channel nut information provided on pg. 50 & 51. A (.70) multiplier is to be applied to obtain the appropriate derated values for aluminum channel. Reference page 164 for general fitting specifications.Other channel combinations available-see steel section for styles. 167 Alum. & Stainless Steel Materials Stainless Steel B22SS* B24SS* •*Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 •Thickness: 12 Ga. (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: SS4, SS6 •Weight: 1.90 Lbs./Ft. (2.83 kg/m) •*Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 •Thickness: 14 Ga. (1.9 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: SS4, SS6 •Weight: 1.40 Lbs./Ft. (2.08 kg/m) 15/8” (41.3) 15/8” (41.3) 15/8” 15/8” (41.3) (41.3) B32SS4 B42SS4 •Thickness: 12 Ga. (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: SS4 •Weight: 1.70 Lbs./Ft. (2.53 kg/m) •Thickness: 12 Ga. (2.6 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: SS4 •Weight: 1.44 Lbs./Ft. (2.14 kg/m) 13/8” 1” (34.9) (25.4) 15/8” 15/8” (41.3) (41.3) B54SS* •*Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 •Thickness: 14 Ga. (1.9 mm) •Standard Length: 10’ (3.05 m) and 20’ (6.09 m) •Material: SS4, SS6 •Weight: .97 Lbs./Ft. (1.44 kg/m) 13/16” (20.6) 15/8” (41.3) SH TYPE CHANNEL H-17/8 TYPE CHANNEL 2” TYP. (50.8) 9/16” x 7/8” SLOTS 17/8” TYP. (14.2) (22.2) H (47.6) 9/16” (14.2) DIA. HOLES H Part No. Thickness B22SH SS4 B22SH SS6 B24SH SS4 B24SH SS6 B32SH SS4 B42SH SS4 B54SH SS4 B54SH SS6 12 Ga. 12 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 14 Ga. 14 Ga. Wt./C Lbs./Ft. kg/m H (2.6) 15/8” (41.3) (2.6) 15/8” 15/8” 15/8” 13/8” 1” 13/16” 13/16” (41.3) (1.9) (1.9) (2.6) (2.6) (1.9) (1.9) (41.3) (41.3) (34.9) (25.4) (20.6) (20.6) 1.82 1.82 1.34 1.34 1.62 1.36 .91 .91 (2.70) (2.70) (1.99) (1.99) (2.41) (2.02) (1.35) (1.35) Part No. B22H17/8 SS4 B24H17/8 SS4 B24H17/8 SS6 B32H17/8 SS4 B42H17/8 SS4 B54H17/8 SS4 B54H17/8 SS6 Thickness 12 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 14 Ga. 14 Ga. H (2.6) 15/8” (41.3) (1.9) 15/8” (41.3) (1.9) 15/8” (41.3) (2.6) 13/8” (34.9) 1” (25.4) (1.9) 13/16” (20.6) (2.6) (1.9) 13/16” (20.6) Wt./C Lbs./Ft. kg/m 1.85 1.36 1.36 1.65 1.39 .93 .93 (2.75) (2.02) (2.02) (2.45) (2.07) (1.38) (1.38) Reference page 164 for general fitting specifications.Other channel combinations available-see steel section for styles. 168 Stainless Steel Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See “Fittings” section of this catalog. Consult factory for possible minimum production quantities and set-up charges. B2000 SERIES PIPE AND TUBING CLAMPS •Safety Factor of 5 •Combination Recess Hex Head Machine Screw and Square Nut included •Material: Stainless Steel Type 304 & 316 Design Load Part No. B2007 SS4 B2008 SS4 B2009 SS4 B2010 SS4 B2011 SS4 B2012 SS4 B2013 SS4 B2014 SS4 B2015 SS4 B2016 SS4 B2017 SS4 B2018 SS4 B2019 SS4 B2020 SS4 Conduit Pipe Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 1 4 /2” (115) 5” (125) 6” (150) Material Thickness 16 Ga. (1.5) 16 Ga. (1.5) 14 Ga. (1.9) 14 Ga. (1.9) 14 Ga. (1.9) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) Design Load Lbs. kN 400 (1.78) 400 (1.78) 600 (2.67) 600 (2.67) 600 (2.67) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) Wt./C Lbs. kg 10 (4.5) 11 (5.0) 15 (6.8) 16 (7.2) 20 (9.1) 30 (13.6) 34 (15.4) 38 (17.2) 44 (19.9) 51 (23.1) 55 (24.9) 59 (26.7) 64 (29.0) 80 (36.3) CHANNEL NUTS •For Channel Nuts pull-out strength and slip resistance, use the data shown in “Channel Nuts & Hardware” section of this catalog. Note: Reduce slip load by 50% due to hardness of material. SPRING NUT NUT WITHOUT SPRING NUTS FOR B22, B24, B32 CHANNELS With Spring N224SS6 N228SS6 N225SS6 Part Number Without Spring N224WOSS6 N228WOSS6 N225WOSS6 Thread Size Wt./C Thickness 1/4”-20 1/4” (6.3) 3/8”-16 3/8” (9.5) 1/2”-13 3/8” (9.5) Lbs. kg 6.6 10.6 9.7 (3.0) (4.8) (4.4) NUTS FOR B42, B52, B54 CHANNELS With Spring N524SS6 N528SS6 N525SS6 Part Number Without Spring N224WOSS6 N228WOSS6 N225WOSS6 Thread Size Wt./C Thickness 1/4”-20 1/4” (6.3) 3/8”-16 3/8” (9.5) 1/2”-13 3/8” (9.5) Lbs. kg 6.6 10.6 9.7 (3.0) (4.8) (4.4) Reference page 164 for general fitting specifications.Other channel combinations available-see steel section for styles. 169 Alum. & Stainless Steel Materials STAINLESS STEEL FITTINGS Fiberglass B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments. Please refer to the "Corrosion Resistance Guide" for specific applications, page 171. Fiberglass Materials Materials & Finishes B-Line Fiberglass Strut systems are manufactured from glass fiber-reinforced plastic shapes that meet ASTM E84, Class 1 Flame Rating and self-extinguishing requirements of ASTM D-635. A surface veil is applied during pultrusion to insure a resin-rich surface and ultraviolet resistance. Fittings The following dimensions apply to all fittings except as noted on the drawings: Hole Size–13/32” (10.3 mm) Dia. Hole Spacing–13/16” (20.6 mm) from end and 17/8” (47.6 mm) on center. Width–15/8” (41.3 mm) Thickness–1/4” (6.3 mm) Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 170 Fiberglass CHANNEL RESIN INFORMATION B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments. Please refer to the "Corrosion Resistance Guide" below for specific applications. Corrosion Resistance Guide Information contained in this chart is based on data from raw material suppliers. Temperatures are not the minimum nor the maximum (except where specifically stated) but represent standard test conditions. The products may be suitable at higher temperatures but individual test data should be required to establish suitability. The recommendations or suggestions contained in this chart are made without guarantee or representation as to results. We suggest that you evaluate the recommendations and suggestions in your own laboratory or actual field trial prior to use. Recommended Guideline: Flame Retardant Properties Temperature Design Load Multiplier 75°F (24°C) 100% 100°F (38°C) 90% 125°F (52°C) 78% 150°F (66°C) 68% 175°F (79°C) 60% 200°F (93°C) 52% Flame Resistance (FTMS 406-2023) ign/burn, seconds Intermittent Flame Test (HLT-15), rating Flammability Test (ASTM D635) Ignition Burning Time Surface Burning Characteristics (ASTM E84), Flame spread index UL 94 Flame Class Reference page 170 for general fitting specifications. 171 BFP BFV 75/75 100 75/75 100 none 0 sec. none 0 sec. 25 V-0 25 V-0 Fiberglass Materials Chemicals 70°F (21°C) 160°F (71°C) Chemicals 70°F (21°C) 160°F (71°C) Acetic acid 5% BFP/BFV BFP/BFV Methyl alcohol 10% BFP/BFV BFV-150° ** Acetic acid 52% BFP/BFV BFV-210° ** Naphtha BFP/BFV BFP/BFV Aluminum potassium sulfate 5% BFP/BFV BFP/BFV Nitric acid 5% BFP/BFV BFP/BFV Ammonium hydroxide 10% BFP/BFV BFV-150° ** Nitric acid 20% BFV BFV-120° ** Ammonium nitrate BFP/BFV BFP/BFV Phosphoric acid 10% BFP/BFV BFP/BFV Benzene sulfonic acid 5% BFP/BFV BFP/BFV Phosphoric acid 30% BFP/BFV BFP/BFV Calcium chloride BFP/BFV BFP/BFV Phosphoric acid 85% BFP/BFV BFP/BFV Carbon tetrachloride BFV BFV-100° ** Sodium bicarbonate 10% BFP/BFV BFP/BFV Chlorine dioxide 15% BFP/BFV BFV-150° ** Sodium bisulfate BFP/BFV BFP/BFV Chromic acid 5% BFV BFV-150° ** Sodium carbonate BFP/BFV BFV Copper sulfate BFP/BFV BFP/BFV Sodium chloride BFP/BFV BFP/BFV Diesel fuel BFP/BFV BFV Sodium hydroxide 1-50% BFV BFV-120° ** Ethylene glycol BFP/BFV BFP/BFV Sodium hypochlorite 5% BFP/BFV BFV-120° ** Fatty acids 100% BFP/BFV BFP/BFV Sodium nitrate BFP/BFV BFP/BFV Ferrous sulfate BFP/BFV BFP/BFV Sodium silicate BFP/BFV BFV-210° ** Fluosilicic acid 0-20% BFV BFV Sodium sulfate BFP/BFV BFP/BFV Gasoline BFP/BFV BFV Sulfuric acid 0-30% BFP/BFV BFP/BFV Hydrochloric acid 1% BFP/BFV BFP/BFV Sulfuric acid 30-50% BFV BFV Hydrochloric acid 15% BFP/BFV BFV-180° ** Sulfuric acid 50-70% BFV BFV-180° ** Hydrochloric acid 37% BFP/BFV BFV-150° ** Trisodium phosphate 25% BFP/BFV BFV-210° ** Kerosene BFP/BFV BFP/BFV Trisodium phosphate-All BFV BFV-210° ** Magnesium chloride BFP/BFV BFP/BFV Water, Distilled BFP/BFV BFP/BFV BFP - BFP parts recommended BFV - BFV parts recommended ** - Not recommended to exceed this temperature Fiberglass BFP22 THRU BFV22SH • Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. BFP22H17/8 Fiberglass Materials BFP22 BFV22 Solid Back Part No. BFP22* BFV22* BFP22H17/8* BFV22H17/8* BFP22SH* BFV22SH* BFP22SH BFV22H17/8 BFV22SH (14.3) x 7/8” (22.2) slots 2” (50.8) on centers 9/16” 9/16” (14.3) holes 17/8” (47.6) on centers Material Description Color Polyester Resin Vinyl Ester Resin Polyester Resin Vinyl Ester Resin Polyester Resin Vinyl Ester Resin Solid Back Solid Back Holes in Back Holes in Back Slots in Back Slots in Back Gray Beige Gray Beige Gray Beige 13/16” (20.6) Weight Lbs./ft. kg/m .63 .63 .60 .60 .61 .61 (.94) (.94) 15/8” (.89) (41.3) (.89) (.91) (.91) 15/8” (41.3) * Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length BFP22A BFV22A 13/16” (20.6) • Channel Lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. 15/8” BFP22A BFV22A Solid Back to Back Part No. BFP22A* BFV22A* Material Description Color Polyester Resin Vinyl Ester Resin Back To Back Back To Back Gray Beige (41.3) 31/4” (82.5) Weight Lbs./ft. kg/m 1.15 1.15 (1.71) (1.71) 15/8” (41.3) * Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length WARNING: Appropriate protective clothing and respiratory protection device should be worn when field cutting or grinding fiberglass. Published design loads on page 172 are based on usage at 70°F (21°C) and must be reduced for continuous exposure to higher temperatures. Refer to the chart below for high temperature applications. Field Cutting Sealant Kits RSK010 .... Pint Sealing Kit (473 cm3) includes sealant and brush applicator • Seals exposed fibers after field cutting. • • UV resistant • Temperature Design Load Multiplier 75°F (24°C) 100°F (38°C) 125°F (52°C) 150°F (66°C) 175°F (79°C) 200°F (93°C) 100% 90% 78% 68% 60% 52% Reference page 170 for general fitting specifications. 172 Fiberglass BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN Beam Span Part No. Maximum Allowable Beam Load Load Lbs. kN Deflection @ Maximum Allowable Beam Load in. mm Allowable Load @ Deflection = 1/360 Span Lbs. kN (1.62) (.94) 1392 2259 (6.19) (10.05) 928 2051 (4.13) (9.12) 0.256 0.147 (6.50) (3.73) 347 767 (1.54) (3.41) 231 511 (1.03) (2.27) (2.63) (3.33) 0.576 0.330 (14.63) (8.38) 153 338 (0.68) (1.50) 101 224 (0.45) (0.99) 443 560 (1.97) (2.49) 1.024 0.587 (26.01) (14.91) 85 188 (0.38) (0.83) 55 123 (0.24) (0.55) BFP22 BFP22A 353 446 (1.57) (1.98) 1.600 0.918 (40.64) (23.32) 53 117 (0.23) (0.52) 34 76 (0.15) (0.34) (1829) BFP22 BFP22A 293 370 (1.30) 2.303 1.322 (58.49) (0.34) 22 50 (0.10) (33.58) 35 78 (0.15) (1.64) 96” (2438) BFP22 BFP22A 218 273 (0.97) (1.21) 4.095 2.350 (104.01) (59.69) 17 39 (0.07) (0.17) 9 23 (0.04) (0.10) 120” (3048) BFP22 BFP22A 172 214 (0.76) (0.95) 6.398 3.671 (162.51) (93.24) 8 19 (0.03) (0.08) 3 9 (0.01) (0.04) mm 12” (305) BFP22 BFP22A 1781 2259 (7.92) (10.05) 0.064 0.037 24” (609) BFP22 BFP22A 890 1127 (3.96) (5.01) 36” (914) BFP22 BFP22A 592 750 48” (1219) BFP22 BFP22A 60” (1524) 72” (0.22) BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN Beam Span in. mm 12” (305) 24” Part No. Maximum Allowable Beam Load Load Deflection @ Maximum Allowable Beam Load Allowable Load @ Deflection = 1/240 Span 1/360 Span Lbs. kN in. mm Lbs. kN Lbs. kN BFV22 BFV22A 2220 6442 (9.87) (28.65) 0.071 0.039 (1.80) (0.99) 1568 6442 (6.97) (29.65) 1045 5549 (4.65) (24.68) (609) BFV22 BFV22A 1109 3219 (4.93) (14.32) 0.283 0.155 (7.19) (3.94) 391 2079 (1.74) (9.25) 260 1385 (1.15) (6.16) 36” (914) BFV22 BFV22A 738 2144 (3.28) (9.53) 0.637 0.348 (16.18) (8.84) 172 922 (0.76) (4.10) 114 613 (0.51) (2.72) 48” (1219) BFV22 BFV22A 553 1606 (2.46) (7.14) 1.133 0.619 (28.78) (15.72) 96 516 (0.43) (2.29) 63 342 (0.28) (1.52) 60” (1524) BFV22 BFV22A 441 1283 (1.96) (5.70) 1.770 0.967 (44.96) (24.56) 60 327 (0.26) (1.45) 39 216 (0.17) (0.96) 72” (1829) BFV22 BFV22A 366 1067 (1.63) (4.74) 2.549 1.393 (64.74) (35.38) 40 224 (0.18) (0.99) 25 147 (0.11) (0.65) 96” (2438) BFV22 BFV22A 273 796 (1.21) (3.54) 4.531 2.477 (115.09) (62.91) 19 121 (0.08) (0.54) 11 78 (0.05) (0.34) 120” (3048) BFV22 BFV22A 216 633 (0.96) (2.81) 7.079 3.870 (179.80) (98.30) 9 72 (0.04) (0.32) 7 44 (0.02) (0.19) Loading Information Beam Loads: The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8. All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist. For channels with holes or slots use 90% of recommended load shown in channel loading chart. Reference page 170 for general fitting specifications. 173 Fiberglass Materials 1/240 Span Lbs. kN in. Fiberglass BFP42 THRU BFV42SH • Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. BFP42SH BFP42H17/8 Fiberglass Materials BFP42 BFV42 Solid Back Part No. BFP42* BFV42* BFP42H17/8* BFV42H17/8* BFP42SH* BFV42SH* BFV42SH (14.3) x 7/8” (22.2) slots 2” (50.8) on centers BFV42H17/8 (14.3) holes 17/8” (47.6) on centers 9/16” 9/16” Material Description Color Polyester Resin Vinyl Ester Resin Polyester Resin Vinyl Ester Resin Polyester Resin Vinyl Ester Resin Solid Back Solid Back Holes in Back Holes in Back Slots in Back Slots in Back Gray Beige Gray Beige Gray Beige Weight Lbs./ft. kg/m .48 .48 .46 .46 .47 .47 13/16” (20.6) (.71) (.71) 1” (25.4) (.68) (.68) (.70) (.70) 15/8” (41.3) * Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length BFP42A BFV42A • Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. Part No. BFP42A* BFV42A* 13/16” (20.6) BFP42A 1” BFV42A Solid Back to Back (25.4) Material Description Color Polyester Resin Vinyl Ester Resin Back To Back Back To Back Gray Beige 2” (50.8) Weight Lbs./ft. kg/m .85 .85 (1.26) 15/8” (41.3) (1.26) * Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length Published design loads on page 174 are based on usage at 70°F (21°C) and must be reduced for continuous exposure to higher temperatures. Refer to the chart below for high temperature applications. WARNING: Appropriate protective clothing and respiratory protection device should be worn when field cutting or grinding fiberglass. Temperature 75°F (24°C) 100°F (38°C) 125°F (52°C) 150°F (66°C) 175°F (79°C) 200°F (93°C) Field Cutting Sealant Kits RSK010 .... Pint Sealing Kit (473 cm3) includes sealant and brush applicator • Seals exposed fibers after field cutting. • • UV resistant • Reference page 170 for general fitting specifications. 174 Design Load Multiplier 100% 90% 78% 68% 60% 52% Fiberglass BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN Beam Span Part No. Maximum Allowable Beam Load Load Lbs. kN Deflection @ Maximum Allowable Beam Load in. mm Allowable Load @ Deflection = 1/360 Span Lbs. kN (2.64) (1.52) 403 1948 (1.79) (8.66) 269 1299 (1.19) (5.78) 0.417 0.239 (10.59) (6.07) 100 486 (0.44) (2.16) 66 323 (0.29) (1.43) (1.24) (3.44) 0.938 0.537 (23.82) (13.64) 43 214 (0.19) (0.95) 29 142 (0.13) (0.63) 208 578 (0.92) (2.57) 1.667 0.955 (42.34) (24.26) 23 119 (0.10) (0.53) 15 78 (0.06) (0.34) BFP42 BFP42A 166 461 (0.74) (2.05) 2.604 1.491 (66.14) (37.87) 14 74 (0.06) (0.33) 8 48 (0.03) (0.21) (1829) BFP42 BFP42A 137 383 (0.61) (1.70) 3.750 2.148 (95.25) (54.56) 8 49 (0.03) (0.22) 5 31 (0.02) (0.14) 96” (2438) BFP42 BFP42A 101 284 (0.45) (1.26) 6.667 3.818 (169.34) (96.98) 3 24 (0.01) (0.10) – 14 (0.04) 120” (3048) BFP42 BFP42A 79 224 (0.35) (0.99) 10.417 5.966 (264.59) (151.53) – 11 – (0.05) – 5 (0.02) mm 12” (305) BFP42 BFP42A 841 2325 (3.74) (10.34) 0.104 0.060 24” (609) BFP42 BFP42A 420 1161 (1.87) (5.16) 36” (914) BFP42 BFP42A 279 773 48” (1219) BFP42 BFP42A 60” (1524) 72” – – BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN Beam Span in. mm 12” (305) 24” Part No. Maximum Allowable Beam Load Load Deflection @ Maximum Allowable Beam Load Lbs. kN in. BFV42 BFV42A 988 2865 (4.39) (12.74) (609) BFV42 BFV42A 493 1431 36” (914) BFV42 BFV42A 48” (1219) 60” Allowable Load @ Deflection = 1/240 Span 1/360 Span mm Lbs. kN Lbs. kN 0.112 0.063 (2.84) (1.60) 440 2278 (1.96) (10.13) 293 1518 (1.30) (6.75) (2.19) (6.36) 0.448 0.252 (11.38) (6.40) 109 568 (0.48) (2.52) 73 378 (0.32) (1.68) 328 953 (1.46) (4.24) 1.009 0.566 (25.63) (14.37) 48 251 (0.21) (1.11) 31 166 (0.14) (0.74) BFV42 BFV42A 245 713 (1.09) (3.17) 1.793 1.006 (45.54) (25.55) 26 139 (0.11) (0.62) 16 92 (0.07) (0.41) (1524) BFV42 BFV42A 195 569 (0.87) (2.53) 2.802 1.572 (71.17) (39.93) 15 87 (0.06) (0.38) 9 57 (0.04) (0.25) 72” (1829) BFV42 BFV42A 162 473 (0.72) (2.10) 4.035 2.264 (102.49) (57.50) 9 58 (0.04) (0.26) 5 37 (0.02) (0.16) 96” (2438) BFV42 BFV42A 120 351 (0.53) (1.56) 7.173 4.025 (182.19) (102.23) 3 29 (0.01) (0.13) 1 17 (0.004) (0.07) 120” (3048) BFV42 BFV42A 94 278 (0.42) (1.23) 11.207 6.288 (284.66) (159.71) – 14 – (0.06) – 7 (0.03) – Loading Information Beam Loads: The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the load is concentrated at center span, multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8. All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between supports to prevent twist. For channels with holes or slots use 90% of recommended load shown in channel loading chart. Reference page 170 for general fitting specifications. 175 Fiberglass Materials 1/240 Span Lbs. kN in. Fiberglass BF*22I CONCRETE INSERTS Fiberglass Materials •Design Load 300 Lbs (1.47 kN) •Safety Factor of 3 •Standard lengths: 6” (152),12” (305), 24” (609), 36” (914), 48” (1219), 60” (1524), 72” (1829), 84” (2133), 96” (2438), 108” (2743) and 120” (3048) •Available Material: *Insert P for BFP - Polyester Resin channel and tee *Insert V for BFV - Vinyl Ester Resin channel with Polyester Resin tee •Shipped with removable styrofoam insert Length 25/8” (66.7) Field Cutting Sealant Kits RSK010 .... Pint Sealing Kit (473 cm3) includes sealant and brush applicator 15/8” (41.3) x 15/8” (41.3) Channel Size • Seals exposed fibers after field cutting. • • UV resistant • BFV501 SERIES U-BOLTS WITH HEX NUTS • Design Load Safety Factor of 3 • Load A: Straight down loading • Load B: Side loading • Inner surface of U-Bolt is flat to provide additional contact surface area • Material: Glass Reinforced Polyurethane LOAD A LOAD B Nominal Pipe Size in. mm Thread Size Design Load A Lbs. kN Design Load B Lbs. kN BFV501-1/2 1/2 (15) 3/8”-16 300 (1.33) 150 (.67) 30 (3.4) 3.5 (1.59) BFV501-3/4 3/4 (20) 3/8”-16 300 (1.33) 150 (.67) 30 (3.4) 3.9 (1.77) (25) 3/8”-16 300 (1.33) 150 (.67) 30 (3.4) 4.4 (1.99) (32) 3/8”-16 300 (1.33) 150 (.67) 30 (3.4) 4.8 (2.18) (40) 3/8”-16 300 (1.33) 150 (.67) 30 (3.4) 5.2 (2.36) (50) 1/2”-13 600 (2.67) 200 (.89) 60 (6.8) 7.7 (3.49) (65) 1/2”-13 600 (2.67) 200 (.89) 60 (6.8) 10.2 (4.63) (80) 1/2”-13 600 (2.67) 200 (.89) 60 (6.8) 12.6 (5.71) (90) 1/2”-13 600 (2.67) 200 (.89) 60 (6.8) 15.1 (6.85) (100) 1/2”-13 600 (2.67) 200 (.89) 60 (6.8) 17.6 (7.98) Part No. BFV501-1 1 BFV501-11/4 11/4 BFV501-11/2 11/2 BFV501-2 BFV501-21/2 BFV501-3 BFV501-31/2 BFV501-4 2 21/2 3 31/2 4 Maximum Torque in.-Lbs. N•m Reference page 170 for general fitting specifications. 176 Wt./C Lbs. kg Fiberglass CHANNEL NUTS • Design Load Safety Factor of 3 • Overall Nut Height 5/8” (15.9) • Maximum torque and slip resistance loads shown are when using stainless steel bolts. When using fiberglass hardware use Max. Torque for fiberglass bolts, and multiply slip resistance loads by .14 for 3/8” and .60 for 1/2” thread size. • Material: Glass Reinforced Polyurethane • Spring Material: Zinc Plated Steel W/O (WITHOUT) SPRING WITH SPRING Part No. Thread W/O Spring Size Lbs Pull-Out kN Lbs. N in.-Lbs. N•m Lbs. kg BFV-224 BFV-223 BFV-228 BFV-225 BFV-224WO BFV-223WO BFV-228WO BFV-225WO 1/4”-20 300 300 300 300 (1.33) 150 150 150 150 (.67) 200 200 200 200 (22.6) 2.4 2.5 2.3 2.1 (1.09) 5/16”-18 3/8”-16 1/2”-13 Slip Resistance (1.33) (1.33) (1.33) Max. Torque (.67) (.67) (.67) BFVHHCS HEX HEAD CAP SCREWS • Design Load Safety Factor of 3 • Material: Glass Reinforced Polyurethane Thread Size Design Load (in tension) Lbs. kN BFVHHCS 5/16 x 1 5/16”-18 190 (.84) 30 (3.4) .4 (.18) BFVHHCS 5/16 x 11/4 5/16”-18 190 (.84) 30 (3.4) .5 (.23) 5/16”-18 190 (.84) 30 (3.4) .6 (.27) 5/16”-18 190 (.84) 30 (3.4) .8 (.36) 3/8”-16 300 (1.33) 45 (5.1) .9 (.41) 3/8”-16 300 (1.33) 45 (5.1) 1.1 (.50) 3/8”-16 300 (1.33) 45 (5.1) 1.3 (.59) 3/8”-16 300 (1.33) 45 (5.1) 1.3 (.59) 3/8”-16 300 (1.33) 45 (5.1) 1.5 (.68) 1/2”-13 490 (2.18) 110 (12.4) 1.4 (.63) 11/4 1/2”-13 490 (2.18) 110 (12.4) 1.8 (.81) BFVHHCS 1/2 x 11/2 1/2”-13 490 (2.18) 110 (12.4) 2.2 (1.00) BFVHHCS 1/2 x 2 1/2”-13 490 (2.18) 110 (12.4) 3.0 (1.36) BFVHHCS 1/2 x 21/2 1/2”-13 490 (2.18) 110 (12.4) 3.7 (1.68) 1/2”-13 490 (2.18) 110 (12.4) 4.5 (2.04) Part No. BFVHHCS 5/16 x 11/2 BFVHHCS 5/16 x 2 BFVHHCS 3/8 x1 BFVHHCS 3/8 x 11/4 BFVHHCS 3/8 x 11/2 BFVHHCS 3/8 x 2 BFVHHCS 3/8 x 21/2 BFVHHCS 1/2 x 1 BFVHHCS BFVHHCS 1/2 1/2 x x3 Max. Torque in.-Lbs. N•m Wt./C Lbs. kg BFVHN HEX NUTS • 3/4” & 1” sizes are available. Contact inside sales for details • Material: Glass Reinforced Polyurethane Part No. Thread Size Nut Thickness in. mm Wt./C Lbs. kg BFVHN 5/16 5/16”-18 17/64 (6.7) .2 (.09) BFVHN 3/8 3/8”-16 21/64 (8.3) .3 (.13) BFVHN 1/2 1/2”-13 7/16 (11.1) .7 (.32) BFVHN 5/8 5/8”-11 35/64 (13.9) 1.4 (.63) Reference page 170 for general fitting specifications. 177 (22.6) (22.6) (22.6) Wt./C (1.13) (1.04) (0.95) Fiberglass Materials Part No. With Spring Fiberglass BFVATR ALL THREADED ROD • Design Load Safety Factor of 3 • Use ATR nuts in place of hex nuts with 3/8”-16 and 1/2”-13 threaded rod in order to obtain minimum required thread engagement of 17/32” (13.5) to obtain design load shown below. • Material: Glass Reinforced Vinyl Ester Fiberglass Materials Part No. Design Load (in tension) Lbs. kN Thread Size BFVATR 3/8 x 48” BFVATR 1/2 x 48” BFVATR 5/8 x 48” 3/8”-16 425 750 950 1/2”-13 5/8”-11 Max. Torque in.-Lbs. N•m 45 110 230 (1.89) (3.33) (4.22) (5.1) (12.4) (26.0) Wt./Ft. Lbs. .08 .13 .21 kg (.04) (.06) (.09) BFVATRHN THREADED ROD NUTS • ATR Nut is required with 3/8”-16 and 1/2”-13 ATR to provide additional thread engagement which is critical to ATR load carrying capacity. • Material: Glass Reinforced Polyurethane H Part No. BFVATRHN 3/8 BFVATRHN 1/2 Thread Size H in. mm 3/8”-16 3/4 (19) 1/2”-13 7/8 (22) Wt./C Lbs. kg .8 1.7 (.36) (.77) BFVFW FLAT WASHERS • Material: PVC Part No. BFVFW 3/8 BFVFW 1/2 BFVFW 5/8 BFVFW 3/4 BFVFW 1 Hole Size in. 3/8 1/2 5/8 3/4 1 Wt./C Lbs. kg .5 .5 .5 .5 .5 (.22) (.22) (.22) (.22) (.22) BFV655 SERIES ROD COUPLINGS • Material: Glass Reinforced Polyurethane Part No. BFV655-3/8 BFV655-1/2 BFV655-5/8 Thread Wt./C Size Lbs. kg 3/8”-16 7.4 11.3 16.7 (3.35) 1/2”-13 5/8”-11 (5.12) (7.57) Reference page 170 for general fitting specifications. 178 Fiberglass BFV100 thru BFV300 DESIGN LOAD ADJUSTABLE PIPE CLAMPS Stop-Lock Kit for vertical installation Part No. BFV100 BFV200 BFV300 Nominal Pipe Sizes Pipe O.D. Range in. mm in. mm 1/2 - 11/2 (15- 40) (40 - 51) .75 - 1.90 1.90 - 2.37 2.87 - 3.50 (21.3 - 48.3) 11/2 - 2 21/2 - 3 (63 - 76) (48.3 - 60.3) (73.0 - 88.9) Design Load Lbs. kN 135 135 145 (.60) (.60) (.64) Max. Torque in.-Lbs. N•m 10 36 36 BFV2000 SERIES NON-METALLIC PIPE CLAMPS • For rigid and PVC conduit. • Standard hardware includes slotted round head machine screw and square nut in 316 stainless steel • Design Load Safety Factor of 3 • Material: Glass Reinforced PPO • Not recommended for vertical installation without additional Stop-Lock Kit. Kit includes one square washer, channel nut and hex head cap screw. Order (Stop-Lock Kit) BFVSL-3/8 for 3/8”-16 hardware or BFVSL-1/2 for 1/2”-13 hardware. Mount kit below clamp when used in vertical strut to prevent clamp slipping. • If non-metallic hardware is required, add N to the part number. Example: BFV2008N Part No. BFV2008 BFV2009 BFV2010 BFV2011 BFV2012 BFV2013 BFV2014 BFV2015 BFV2016 BFV2017 Nominal Pipe Size in. mm 1/2 (15) 3/4 (20) 1 11/4 11/2 2 1 2 /2 3 31/2 4 (25) (32) (40) (50) (65) (80) (90) (100) Design Load Lbs. kN 300 300 300 300 300 300 300 300 300 300 (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) DESIGN LOAD Maximum Torque in.-Lbs. N•m 10 10 10 10 10 10 10 10 10 10 (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) (1.13) Reference page 170 for general fitting specifications. 179 Stop-Lock Kit for vertical installation (1.13) (4.07) (4.07) Fiberglass Materials •Completely Non-Metallic •Adjustable to U.S. & Metric Pipe Diameters •Fits OD Sizes 3/4” (19.0) to 31/2” (88.9) •Easy To Install •No Special Tools Required •Design Load Safety Factor of 3 •Material: Glass Reinforced Polyurethane •Not recommended for vertical installation without additional Stop-Lock Kit. Kit includes one square washer, channel nut and hex head cap screw. Order (Stop-Lock Kit) BFVSL-3/8 for 3/8”-16 hardware or BFVSL-1/2 for 1/2”-13 hardware. Mount kit below clamp when used in vertical strut to prevent clamp slipping. Fiberglass BFP2400 SERIES 2-HOLE PIPE CLAMPS • Design Load Safety Factor of 3 • Material: Glass Reinforced Polyester DESIGN LOAD 15/8” (41.3) Fiberglass Materials PIPE SIZE 13/32” (10.3) HOLE DIA. A B Part No. BFP2400-2 BFP2400-3 BFP2400-4 BFP2400-6 Nominal Pipe Size in. mm in. mm in. mm Lbs. kN 2 3 4 6 23/8 31/2 41/2 65/8 (60) 51/2 63/4 73/4 10 (140) 115 130 150 150 (0.51) (50) (80) (100) (150) A Design Load B (89) (114) (168) (171) (197) (254) (0.58) (0.66) (0.66) BFV751 & BFV751J BEAM CLAMP 1/2”-13 x 2” (50.8) • Design Load Safety Factor of 3 • BFV751J (clip included) must be used when installed on tapered flange beams. • Material: Glass Reinforced Polyurethane • Setscrew material: Stainless Steel 316 ASTM F593 Group 2, S4 Screw 3” BFV751 (Clamp Only) BFV751J (Clamp and Retainer Clip) (76.2) 1” (25.4) 41/4” (108.0) Part No. BFV751-3/8 BFV751J-3/8 BFV751-1/2 BFV751J-1/2 BFV751-5/8 BFV751J-5/8 For Hanger Rod Size A 3/8”-16 3/8”-16 1/2”-13 1/2”-13 5/8”-11 5/8”-11 Design Load Lbs. kN 500 500 500 500 500 500 (2.22) (2.22) (2.22) (2.22) (2.22) (2.22) Torque ft.-Lbs. N•m 10 10 10 10 10 10 TAPPED FOR HANGER ROD SIZE A (13) (13) (13) (13) (13) (13) Reference page 170 for general fitting specifications. 180 11/8” (28.6) BFVATR3/8” & BFPUATRHN (Order Separately) Fiberglass BFV755 BEAM CLAMP • Design Load Safety Factor of 3 • Material: Glass Reinforced Polyurethane • Setscrew material: Stainless Steel 316 ASTM F593 Group 2, S4 1/2”-13 x 2” (50.8) 25/8” Screw (66.7) 3” (76.2) Part No. For Hanger Rod Size A 3/8”-16 400 400 1/2”-13 3/4” (19.0) Torque ft.-Lbs. N•m 10 10 (1.78) (1.78) TAPPED FOR HANGER ROD SIZE A (13) (13) BFV3104 SERIES CLEVIS HANGERS • Design Load Safety Factor of 3 at 120°F (49°C). • Insulation may be required at higher temperatures. • Order hanger rod and nuts separately. • Material: Glass Reinforced Polyurethane For BFV3104-1 thru BFV3104-6 • Material: Glass Reinforced Polyester & Vinyl Ester For BFV3104-8 thru BFV3104-12 C C A A B B BFV3104-1 thru BFV3104-6 Nominal Pipe Size in. mm Part No. BFV3104-1 BFV3104-11/2 BFV3104-2 BFV3104-21/2, 3, 4 BFV3104-6 Part No. BF*3104-8 BF*3104-10 BF*3104-12 1 (50) 11/2 (65) 2 (50) 21/2-4 (65-100) 6 (150) Nominal Pipe Size in. mm 8 10 12 (200) (250) (300) BFV3104-8 thru BFV3104-12 A B Hanger Rod Size C in. mm in. mm in. mm 11/2 2 21/2 51/8 63/4 (38) 41/4 51/8 61/2 10 125/16 (108) 11/4 11/4 11/4 11/2 2 (32) 1/2”-13 (32) 1/2”-13 (32) 1/2”-13 (38) 1/2”-13 (51) 1/2”-13 (51) (63) (130) (171) A (130) (165) (254) (313) B Hanger Rod Size C in. mm in. mm in. mm 91/4 113/8 131/2 (235) 165/8 197/8 223/8 (422) 3 4 5 (76) 5/8”-11 (101) 5/8”-11 (127) 5/8”-11 (289) (343) (505) (568) *Specify P for polyester or V for Vinyl ester. Reference page 170 for general fitting specifications. 181 Design Load Lbs. kN 670 670 730 1150 1170 (2.98) (2.98) (3.25) (5.11) (5.20) Design Load Lbs. kN 350 450 600 (1.55) (2.01) (2.69) Fiberglass Materials BFV755-3/8 BFV755-1/2 Design Load Lbs. kN Fiberglass BF*409 SERIES BRACKETS 6” (152) TO 24” (609) LONG • Design Load Safety Factor of 3 based on uniform loading • MH1 - From Top of Bracket to center of Mounting Hole • MH2 - From Bottom of Bracket to center of Mounting Hole 11/4” (31.7) A Fiberglass Materials MH1 12" (304.8) A Part No. BF*409-6 BF*409-9 BF*409-12 BF*409-18 BF*409-24 in. mm 10 13 16 22 28 (250) (330) (406) (559) (711) Design Load Lbs. kN 1400 1000 800 675 450 MH2 (6.22) 13/32” (10.3) DIA. MOUNTING HOLES (4.45) (3.56) 11/4” (3.00) (31.7) (2.00) * Insert P for Glass Reinforced Polyester Resin or V for Glass Reinforced Vinyl Ester Resin BF*494 SERIES BRACKETS 24” (609) TO 36” (914) LONG • Design Load Safety Factor of 3 based on uniform loading • MH1 - From Top of Bracket to center of Mounting Hole • MH2 - From Bottom of Bracket to center of Mounting Hole • Material: Glass Reinforced Vinyl Ester or Polyester 11/4” (31.7) MH1 A B A Part No. BF*494-24 BF*494-30 BF*494-36 B in. mm in. mm 28 34 40 (711) 23 26 29 (584) (863) (1016) (660) (736) Design Load Lbs. kN 750 750 750 (3.33) (3.33) MH2 (3.33) MOUNTING HOLES 11/4” * Insert P for Glass Reinforced Polyester Resin or V for Glass Reinforced Vinyl Ester Resin (31.7) Reference page 170 for general fitting specifications. 182 13/32" (10.3) DIA. Fiberglass BFV201 BFV202 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane SQUARE WASHER FOR 3/8” BOLT SQUARE WASHER FOR 1/2” BOLT 15/8” 15/8” (41.3) (41.3) 9/16” (14.3) DIAMETER HOLE BFV340 BFV129 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane TWO HOLE SPLICE PLATE TWO HOLE FLAT PLATE 15/8” (41.3) 31/4” (82.5) 31/2” (88.9) BFV141 BFV557 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane THREE HOLE FLAT PLATE THREE HOLE FLAT PLATE 47/8” (123.8) 53/8” (136.5) 15/8” 15/8” (41.3) (41.3) Reference page 170 for general fitting specifications. 183 Fiberglass Materials 13/32” (10.3) DIAMETER HOLE Fiberglass BFV341 BFV342 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FOUR HOLE SPLICE PLATE FIVE HOLE FLAT PLATE 91/8” (231.8) 71/4” Fiberglass Materials (184.1) BFV140 BFV143 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FOUR HOLE FLAT CORNER PLATE THREE HOLE FLAT CORNER PLATE 31/2” 31/2” (88.9) (88.9) 31/2” 53/8” (136.5) (88.9) BFV132 BFV133 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FOUR HOLE FLAT TEE PLATE FIVE HOLE FLAT CROSS PLATE 53/8” (136.5) 31/2” (88.9) 53/8” (136.5) 53/8” (136.5) Reference page 170 for general fitting specifications. 184 Fiberglass BFV135 BFV142 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane THREE HOLE FLAT GUSSET CORNER PLATE FOUR HOLE FLAT GUSSET CORNER PLATE 31/2” 31/2” (88.9) (88.9) 31/2” 53/8” (88.9) (136.5) BFV136 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane THREE HOLE FLAT GUSSET TEE PLATE Fiberglass Materials BFV337 FOUR HOLE FLAT GUSSET TEE PLATE 31/2” (88.9) 31/2” (88.9) 31/2” 53/8” (88.9) (136.5) BFV532 BFV334 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FIVE HOLE FLAT GUSSET TEE PLATE SEVEN HOLE FLAT GUSSET CROSS PLATE 91/8” (231.8) 53/8” (136.5) 53/8" (136.5) 53/8” (136.5) Reference page 170 for general fitting specifications. 185 Fiberglass BFV101 BFV103 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane TWO HOLE 90° CORNER ANGLE THREE HOLE 90° CORNER ANGLE 15/8” 15/8” (41.3) (41.3) 25/16” 41/8” (104.8) Fiberglass Materials (58.7) BFV104 BFV118 •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FOUR HOLE 90° CORNER ANGLE FOUR HOLE 90° GUSSETTED SHELF ANGLE 31/2” 15/8” 31/2” (88.9) (41.3) (88.9) 41/8” (104.8) 41/8” (104.8) BFV558 BFV371-2G •Material: Injection Molded Glass Reinforced Polyurethane •Material: Injection Molded Glass Reinforced Polyurethane FOUR HOLE 90° CORNER ANGLE THREE HOLE 90° GUSSETTED CORNER ANGLE 31/4” (82.5) THREE HOLES 21/4” .400” Dia. (10.1) (57.1) 4” (101.6) 15/8” (41.3) 15/8” (41.3) 15/8” (41.3) Reference page 170 for general fitting specifications. 186 Fiberglass BFV280SQ BFV281SQ •Material: Glass Reinforced Polyurethane •Material: Glass Reinforced Polyurethane POST BASE FOR BF*22 POST BASE FOR BF*22A (76.2) 5” 5” (127.0) (127.0) 5” (168.3) (127.0) BFV650 B217P •Spacer I.D. accommodates 3/8" rod or bolts. •Material: Polyurethane •Available in 10 Ft. (3.05 m) lengths. •Material: PVC CHANNEL SPACER 65/8” PLASTIC CLOSURE STRIP 17/16” (36.5) 5/8” (15.9) Used when attaching fittings to side walls of channel. This channel spacer prevents wall compression in heavy load conditions. Reference page 170 for general fitting specifications. 187 Fiberglass Materials 3” (76.2) 3” Mini Channel & Fittings B-Line’s mini channels and fittings provide for an economical method of supporting light load requirements on a metal framing system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm) low carbon steel strips plain steel (ASTM A1008 33,000 PSI min. yield) and pregalvanized steel strips, (ASTM A653 33,000 PSI min. yield). A continuous slot with inturned lips provides the ability to make attachments at any point. Channel combinations are made with new state of the art, high-tech welding equipment. Lengths Standard lengths are 10’ (3.05 m) and 20’ (6.09 m) for B62 series, and 10’ (3.05 m) for B72 series. Custom lengths are available. Fittings Mini Channel & Fittings Mini fittings are formed from hot rolled pickled and oiled strip or sheet steel (ASTM A1011, HSLAS, Grade 50, Class1). The following dimensions apply to all fittings except as noted on the drawings: Hole Size–9/32” (7.14 mm) Dia. Hole Spacing–13/32” (10.3 mm) from end and 11/16” (27.0 mm) on center. Width–13/16” (20.6 mm) Thickness–1/8” (3.2 mm) Materials & Finishes* Finish Code Finish PLN Plain ZN GRN GALV Electro-Plated Zinc Dura-Green Pre-Galvanized HDG Hot-Dipped Galvanized Specification ASTM A1011, HSLAS, Grade 50, Class 1 ASTM B633 SC3 Type II ASTM A653 33,000 PSI min. yield ASTM A123 *Unless otherwise noted. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 188 B62 Channel 13/16” 13/16” •Thickness: 18 Ga. (1.2 mm) •Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized •Weight: .42 Lbs./Ft. (.62 kg/m) (20.6) (20.6) 7/16” (11.1) 3/16” 3/16” (4.7) (4.7) 3 /32” Y 13/16” (41.3) X .346 (8.8) (20.6) 15/8” X (2.4) Y .406 (10.3) B62A 13/16” .406 (10.3) (20.6) Wt. .84 Lbs./Ft. (1.25 kg/m) X - X Axis SECTION PROPERTIES Channel B62 B62A Areas of Weight Section lbs./ft. kg/m sq. in. cm2 .420 (.62) .123 (.80) .839 (1.25) .247 (1.59) Moment of Inertia (I) in.4 cm4 .0103 (.43) .0500 (2.08) Section Modulus (S) in.3 cm3 .0221 (.36) .0616 (1.01) Y - Y Axis Radius of Moment of Section Radius of Gyration (r) Inertia (I) Modulus (S) Gyration (r) in. cm in.4 cm4 in.3 cm3 in. cm .289 (.73) .0134 (.56) .0330 (.54) .330 (.84) .450 (1.14) .0269 (1.12) .0663 (1.09) .330 (.84) Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. BEAM LOADING 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) Channel Style Lbs. B62 B62A B62 B62A B62 B62A B62 B62A B62 B62A B62 B62A 364 420* 182 420* 121 341 91 256 73 205 61 170 Uniform Load and Deflection N In. mm .027 .006 .109 .051 .245 .141 .436 .250 .681 .391 .981 .563 (1619.1) (1868.2) (809.6) (1868.2) (538.2) (1516.8) (404.8) (1138.7) (324.7) (911.9) (271.3) (756.2) (.68) (.15) (2.77) (1.29) (6.22) (3.58) (11.07) (6.35) (17.30) (9.93) (24.92) (14.30) 364 420* 167 420* 74 341 42 204 27 131 19 91 (1619.1) (1868.2) (742.8) (1868.2) (329.1) (1516.8) (186.8) (907.4) (120.1) (582.7) (84.5) (404.8) 364 420* 111 420* 50 242 28 136 18 87 12 61 (1619.1) (1868.2) (493.7) (1868.2) (222.4) (1076.4) (124.5) (604.9) (80.0) (387.0) (53.4) (271.3) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) Channel Style B62 B62A B62 B62A B62 B62A B62 B62A B62 B62A B62 B62A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 2052 4666 1350 4275 818 3624 589 2713 456 1765 365** 1225 (9127.7) (20755.4) (6005.1) (19016.1) (3638.6) (16120.3) (2620.0) (12068.0) (2028.4) (7851.1) (1623.6) (5449.1) 820 1449 645 1367 471 847 369 504 300 323 248 224 (3647) (6445) (2869) (6081) (2095) (3767) (1641) (2242) (1334) (1437) (1103) (996) Max. Column Loading (Loaded @ C.G.) Lbs. 2161 4710 1624 4453 1053 4023 745 3421 579 2647 470 1856 K = .65 N (9612.6) (20951.1) (7223.9) (19807.9) (4684.0) (17895.2) (3313.9) (15217.3) (2575.5) (11774.4) (2090.6) (8255.9) K = 1.0 Lbs. N 1890 4593 1020 3982 633 2965 456 1765 347** 1129 271** 784** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 188 for general fitting specifications. 189 (8407.1) (20430.7) (4537.2) (17712.8) (2815.7) (13189.0) (2028.4) (7851.1) (1543.5) (5022.0) (1205.4) (3487.4) K = 1.2 Lbs. N 1715 (7628.7) 4503 (20030.3) 818 (3638.6) 3624 (16120.3) 515 (2290.8) 2179 (9692.7) 365** (1623.6) 1225 (5449.1) 271** (1205.4) 784** (3487.4) – – 545** (2424.3) Mini Channel & Fittings Beam Span In. mm Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N B72 Channel •Thickness: 18 Ga. (1.2 mm) •Standard lengths: 10’ (3.05 m) •Standard finishes: Plain, Dura-Green, Pre-Galvanized •Weight: .29 Lbs./Ft. (.43 kg/m) 13/16” 13/16” (20.6) (20.6) 7/16” (11.1) Y 3/16” 3/16” (4.7) (4.7) 3/32” 13/32” B72 B72A Areas of Moment of Weight Section Inertia (I) lbs./ft. kg/m sq. in. cm2 in.4 cm4 .287 (.43) .084 (.54) .0018 (.07) .574 (.85) .169 (1.09) .0078 (.32) Section Modulus (S) in.3 cm3 .0073 (.12) .0192 (.31) .406 (10.3) .406 (10.3) B72A Wt. .58 Lbs./Ft. (.87 kg/m) X - X Axis SECTION PROPERTIES Channel Y .160 (4.0) .406 (10.3) (20.6) X (2.4) (10.3) 13/16” X Y - Y Axis Radius of Moment of Section Radius of Gyration (r) Inertia (I) Modulus (S) Gyration (r) in. cm in.4 cm4 in.3 cm3 in. cm .146 (.37) .0077 (.32) .0190 (.31) .302 (.77) .215 (.55) .0155 (.65) .0382 (.63) .303 (.77) Mini Channel & Fittings Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual. BEAM LOADING Beam Span In. mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) Channel Style Lbs. B72 B72A B72 B72A B72 B72A B72 B72A B72 B72A 116 210* 58 159 39 106 29 80 23 64 Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection N In. mm (516.0) (934.1) (258.0) (707.2) (173.5) (471.5) (129.0) (355.8) (102.3) (284.7) .051 .020 .206 .125 .465 .281 .827 .500 1.292 .782 (1.29) (.51) (5.23) (3.17) (11.81) (7.14) (21.00) (12.70) (32.81) (19.86) 113 210* 28 127 13 57 7 32 5 20 75 210* 19 85 8 38 5 21 3 14 (502.6) (934.1) (124.5) (564.9) (57.8) (253.5) (31.1) (142.3) (22.2) (88.9) (324.7) (934.1) (84.5) (378.1) (35.6) (169.0) (22.2) (93.4) (13.3) (62.3) Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequate lateral bracing (see page 11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear. COLUMN LOADING Unbraced Height In. mm 12 (305) 24 (609) 36 (914) 48 60 (1219) (1524) Channel Style B72 B72A B72 B72A B72 B72A B72 B72A B72 B72A Max. Column Loading K = .80 Loaded@ Loaded@ C.G. Slot Face Lbs. N Lbs. N 1598 3600 701 2710 313** 1421 177** 799 113** 512** (7108) (16013) (3118) (12054) (1392) (6321) (787) (3554) (502) (2277) 539 986 320 802 188 569 122 404 85 298 (2397) (4386) (1423) (3567) (836) (2531) (542) (1797) (378) (1325) Max. Column Loading (Loaded @ C.G.) Lbs. K = .65 N 1712 3700 1050 3113 473 2135 267** 1211 171** 775 (7615) (16458) (4670) (13847) (2104) (9497) (1187) (5387) (760) (3447) K = 1.0 Lbs. N 1410 3433 450 2043 201** 909 – 512** – 327** **Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r Reference page 188 for general fitting specifications. 190 (6272) (15271) (2001) (9088) (894) (4043) – (2277) – (1454) K = 1.2 Lbs. N 1181 3229 313** 1421 – 631** – 355** – – (5253) (14363) (1392) (6321) – (2807) – (1579) – – Mini Channel Nuts & Fittings NUTS FOR B62, B72 CHANNEL SPRING NUT NUT WITHOUT SPRING Part Number B62 B72 Without Spring With Spring Without Spring Thread Size N621 N622 N627 N624 BMM-3L BMM-4L BMM-5L BMM-6L N621WO N622WO N627WO N624WO BMM-3 BMM-4 BMM-5 BMM-6 N7221 N7222 N7227 N7224 BMM-3S BMM-4S BMM-5S BMM-6S N621WO N622WO N627WO N624WO BMM-3 BMM-4 BMM-5 BMM-6 #8-32 #10-24 #10-32 1/4-20 M3.5 x 0.6 M4 x 0.7 M5 x 0.8 M6 x 1 Wt./C Lbs. kg Thickness .150 .150 .150 .150 .150 .150 .150 .150 (3.81) (3.81) (3.81) (3.81) (3.81) (3.81) (3.81) (3.81) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 (.45) (.45) (.45) (.45) (.45) Mini Channel & Fittings With Spring (.45) (.45) (.45) MINI FITTINGS B6202 B6129 B6340 •Standard finishes: ZN, GRN •Wt./C 2 Lbs. (.9 kg) •Standard finishes: ZN, GRN •Wt./C 5 Lbs. (2.2 kg) •Standard finishes: ZN, GRN •Wt./C 5 Lbs. (2.2 kg) SQUARE WASHER TWO HOLE SPLICE PLATE 13/16” 17/8” (20.6) (47.6) TWO HOLE SPLICE PLATE 15/8” (41.3) 9/32” (7.1) DIA. 13/16” (20.6) Reference page 188 for general fitting specifications. 191 Mini Fittings B6141 THREE HOLE SPLICE PLATE •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) B600-62 B6557 THREE HOLE FLAT ADAPTER PLATE THREE HOLE SPLICE PLATE •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) •Standard finishes: ZN, GRN •Wt./C 19 Lbs. (8.6 kg) 27/16” (61.9) 215/16” 15/8” (74.6) 41/8” (104.8) (41.3) B22 B62 13/16” (20.6) B6138 B6341 TWO HOLE SWIVEL PLATE Mini Channel & Fittings FOUR HOLE SPLICE PLATE •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) B6139 THREE HOLE SWIVEL PLATE •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) 211/16” 33/4” (68.2) (95.2) 17/8” 17/8” 4” (47.6) (101.6) (47.6) B6504 B6140 B6143 •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) •Standard finishes: ZN, GRN •Wt./C 8 Lbs. (3.6 kg) •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) FOUR HOLE SPLICE PLATE 17/8” (47.6) 15/8” (41.3) THREE HOLE CORNER PLATE FOUR HOLE CORNER PLATE 17/8” 17/8” (47.6) (47.6) 17/8” (47.6) 13/16” (20.6) 215/16” (74.6) Reference page 188 for general fitting specifications. 192 Mini Fittings B6133 B6132 •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) •Standard finishes: ZN, GRN •Wt./C 13 Lbs. (5.9 kg) FOUR HOLE TEE PLATE FIVE HOLE CROSS PLATE B6135 THREE HOLE CORNER GUSSET PLATE •Standard finishes: ZN, GRN •Wt./C 9 Lbs. (4.1 kg) 215/16” 17/8” 17/8” (74.6) (47.6) (47.6) 215/16” (74.6) 17/8” (47.6) 215/16” (74.6) B6142 B6337 B6136 •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) FOUR HOLE CORNER GUSSET PLATE FOUR HOLE TEE GUSSET PLATE THREE HOLE TEE GUSSET PLATE 17/8” (47.6) (47.6) (47.6) 215/16” 17/8” 215/16” (74.6) (47.6) (74.6) B6532 FIVE HOLE TEE GUSSET PLATE •Standard finishes: ZN, GRN •Wt./C 22 Lbs. (10.0 kg) B6101 B6230 •Standard finishes: ZN, GRN •Wt./C 5 Lbs. (2.2 kg) •Standard finishes: ZN, GRN •Wt./C 5 Lbs. (2.2 kg) TWO HOLE CORNER ANGLE TWO HOLE CORNER ANGLE 15/16” 13/16” (23.8) (20.6) 215/16” (74.6) 11/4” 215/16” (31.7) (74.6) Reference page 188 for general fitting specifications. 193 11/8” (28.6) Mini Channel & Fittings 17/8” 17/8” Mini Fittings B6102 B6103 •Standard finishes: ZN, GRN •Wt./C 8 Lbs. (3.6 kg) •Standard finishes: ZN, GRN •Wt./C 8 Lbs. (3.6 kg) THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE B6232 THREE HOLE CORNER ANGLE •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) 13/16” 15/16” (20.6) 17/8” (23.8) (47.6) 25/16” (58.7) 23/16” 11/4” (55.5) (31.7) B6374 B6104 B6558 •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) Mini Channel & Fittings THREE HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE 11/8” (28.6) 13/16” 17/8” (20.6) (47.6) 11/4” (31.7) 25/16” (58.7) 2” 13/16” (50.8) (20.6) 15/8” (41.3) B6357 B6239 •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) •Standard finishes: ZN, GRN •Wt./C 14 Lbs. (6.3 kg) FOUR HOLE OFFSET BENT TEE B6144R&L FIVE HOLE OFFSET BENT TEE 11/8” FOUR HOLE SHELF BRACKET •Standard finishes: ZN, GRN •Wt./C 19 Lbs. (8.6 kg) 215/16” 17/8” (74.6) (47.6) (28.6) 11/8” (28.6) 215/16” 17/8” (74.6) 25/16” (47.6) (58.7) (Right shown) 15/16” (23.8) Reference page 188 for general fitting specifications. 194 Mini Fittings B6134R&L B6234 R&L •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) FOUR HOLE CORNER GUSSET FOUR HOLE CORNER GUSSET B6118 FOUR HOLE GUSSETTED SHELF ANGLE •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) 17/8” 23/16” 17/8” (47.6) (55.5) (47.6) 17/8” 15/16” (23.8) (47.6) 25/16” (58.7) 25/16” 15/16” (Left shown) (58.7) (23.8) (Left shown) B6533 B6126 B6127 •Standard finishes: ZN, GRN •Wt./C 22 Lbs. (10.0 kg) •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) •Standard finishes: ZN, GRN •Wt./C 18 Lbs. (8.1 kg) FIVE HOLE GUSSETTED SHELF ANGLE (20.6) FIVE HOLE GUSSETTED THREE WAY SHELF ANGLE 17/8” 17/8” 25/16” (47.6) (47.6) 17/8” (58.7) 17/8” (47.6) (47.6) 11/4” 25/16” (31.7) 215/16” (58.7) (74.6) B6112 B589-62 FOUR HOLE ADJUSTABLE CORNER ANGLE TWO HOLE 90° ADAPTER ANGLE •Standard finishes: ZN, GRN •Wt./C 32Lbs. (14.5 kg) •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) B62 13/16” (20.6) 9/32” (7.1) x 3/4” (19.0) 23/16” SLOTS (55.6) 27/16” 117/32” B22 (61.9) (38.9) 15/16” 4” (23.8) (101.6) 15/8” (41.3) Reference page 188 for general fitting specifications. 195 15/8” (41.3) Mini Channel & Fittings 13/16” FOUR HOLE GUSSETTED THREE WAY SHELF ANGLE Mini Fittings B6147-B6152 B6154 TWO HOLE OPEN ANGLE TWO HOLE OPEN ANGLE B •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN •Wt./C 8 Lbs. (3.6 kg) 13/32” (10.3) C 13/32” (10.3) Part No. A B6147 B6148 B6149 B6150 B6151 B6152 1 B 1 82 /2° 2 /32” 75° 21/32” 1 67 /2° 2” 60° 131/32” 521/2° 17/8” 371/2° 2” (51.6) (51.6) (50.8) (50.0) (47.6) (50.8) /32” 27 /32” 7 /8” 15/16” 11/16” 29 /32” (43.6) Wt./C Lbs. kg C 27 123/32” 13/32” (10.3) (21.4) (22.2) (30.1) 13/32” (3.6) 8.0 (10.3) (23.8) (27.0) (23.0) B6162-B6165 B6156-B6161 •Standard finishes: ZN, GRN •Standard finishes: ZN, GRN TWO HOLE CLOSED ANGLE TWO HOLE OPEN ANGLE 13/32” 13/32” A (10.3) Mini Channel & Fittings 13/16” 45° (21.4) A B (47.6) 1 1 /32” 13/32” (26.2) (10.3) Part No. Wt./C B6162 B6163 B6164 B6165 A 30° 221/2° 15° 71/2° Lbs. kg 8.0 (3.6) B6156 B6157 B6158 B6159 B6160 B6161 A Wt./C Lbs. kg B 821/2° 75° 671/2° 60° 521/2° 371/2° 19/32” 15/16” 13/8” 113/32” 115/32” 121/32” (32.5) (33.3) (34.9) 8.0 (35.7) (37.3) (42.0) B6155 B601-62 B6169 •Standard finishes: ZN, GRN •Wt./C 8 Lbs. (3.6 kg) •Standard finishes: ZN, GRN •Wt./C 14 Lbs. (6.3 kg) •Standard finishes: ZN, GRN •Wt./C 11 Lbs. (5.0 kg) TWO HOLE CLOSED ANGLE TWO HOLE 45° ADAPTER ANGLE (10.3) 17/8” (47.6) (10.3) B22 113/64” (30.5) 45° 13/32” TWO HOLE SPLICE CLEVIS FOR B72 B62 13/32” 17/8” 15/8” 45° (41.3) 19/16” (39.7) (47.6) (10.3) 17/8” Part No. 17/8” (10.3) 13/32” 15/8” (41.3) Reference page 188 for general fitting specifications. 196 B72 (47.6) (3.6) Mini Fittings B6168 B6167 B6170 •Standard finishes: ZN, GRN •Wt./C 16 Lbs. (7.2 kg) •Standard finishes: ZN, GRN •Wt./C 24 Lbs. (10.9 kg) •Standard finishes: ZN, GRN •Wt./C 17 Lbs. (7.7 kg) 4” 17/8” THREE HOLE SPLICE CLEVIS FOR B72 FOUR HOLE SPLICE CLEVIS FOR B72 215/16” (101.6) (74.6) B72 TWO HOLE SPLICE CLEVIS FOR B62 B6172 •Standard finishes: ZN, GRN •Wt./C 26 Lbs. (11.8 kg) •Standard finishes: ZN, GRN •Wt./C 36 Lbs. (16.3 kg) B7116 FOUR HOLE SPLICE CLEVIS FOR B62 THREE HOLE SPLICE CLEVIS FOR B62 THREE HOLE U-SUPPORT •Standard finishes: ZN, GRN •Wt./C 10 Lbs. (4.5 kg) 13/32” (10.3) 4” 215/16” (101.6) (74.6) B62 231/32” B62 (75.4) B6107 B6107-62A B6594 •Standard finishes: ZN, GRN •Wt./C 12 Lbs. (5.4 kg) •Standard finishes: ZN, GRN •Wt./C 16 Lbs. (7.2 kg) •Standard finishes: ZN, GRN •Wt./C 13 Lbs. (5.9 kg) THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT FIVE HOLE U-SUPPORT 121/32” 15/16” (42.0) (23.8) 13/16” 15/8” (20.6) (41.3) 231/32” (75.4) 231/32” (75.4) 317/32” (89.7) Reference page 188 for general fitting specifications. 197 Mini Channel & Fittings B6171 (47.6) B62 B72 Mini Fittings B6173 FOUR HOLE CLEVIS B6526 B6105 •Standard finishes: ZN, GRN •Wt./C 5 Lbs. (2.2 kg) •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) TWO HOLE OFFSET Z-SUPPORT •Standard finishes: ZN, GRN •Wt./C 9 Lbs. (4.1 kg) TWO HOLE Z-SUPPORT FOR B62 1/8” (3.2) 15/16” (23.8) 13/16” (20.6) 13/16” 121/32” (20.6) (42.0) 13/4” (44.4) 17/8” 13/16” (47.6) (20.6) B7105 B6110 B6108 •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) •Standard finishes: ZN, GRN •Wt./C 9 Lbs. (4.1 kg) •Standard finishes: ZN, GRN •Wt./C 7 Lbs. (3.2 kg) TWO HOLE Z-SUPPORT FOR B62A Mini Channel & Fittings TWO HOLE Z-SUPPORT FOR B72 TWO HOLE OFFSET Z-SUPPORT 13/4” (44.4) 13/32” 15/16” (10.3) (23.8) 13/4” 17/8” (44.4) 13/4” (47.6) (44.4) 13/16” (20.6) B598-62 B6571 •Standard finishes: ZN, GRN •Wt./C 28 Lbs. (12.7 kg) •Standard finishes: ZN, GRN •Wt./C 28 Lbs. (12.7 kg) EIGHT HOLE WING CONNECTION TWO HOLE Z-ADAPTER PLATE 13/16” B62 229/32” (20.6) 15/8” (73.8) 23/4” (41.3) 17/8” (69.8) 17/8” (47.6) B22 (47.6) 13/16” (20.6) Reference page 188 for general fitting specifications. 198 Mini Fittings B6205 B7205 B6211 •Material: ASTM A1008 SS Gr. 33 Type 1 •Standard finishes: ZN, GRN •Wt./C 3 Lbs. (1.3 kg) •Material: ASTM A1008 SS Gr. 33 Type 1 •Standard finishes: ZN, GRN •Wt./C 1 Lb. (.4 kg) •5/16”-18 Setscrew included •13/16” (20.6) Max. Flange Thickness •Material: ASTM A36 •Standard finishes: ZN, GRN •Wt./C 13 Lbs. (5.9 kg) END CAP FOR B62 END CAP FOR B72 13/16” 13/32” (20.6) (10.3) Z-BEAM CLAMP 3/4” (19.0) 13/16” (20.6) 1/4” (6.3) 17/8” (47.6) B6409-6, 9 B2350-B2355 BRACKET 13/16” ONE HOLE DOUBLE TUBING STRAP (20.6) 9/32” (7.1) DIA. B •Material: ASTM A1008 SS Gr. 33 Type 1 •Standard finishes: ZN, GRN A 25/16” C (58.7) A Part No. B62 Part No. Wt./C Lbs. kg A B6409-6 B6409-9 6” 9” B2350 B2351 B2352 B2353 B2354 B2355 28.0 35.0 (152.4) (228.6) (12.7) (15.8) O.D. Size A O.D.Size B 1/4” (6.3) 1/4” (6.3) 3/8” (9.5) 3/8” (9.5) 1/2” (12.7) 1/2” (12.7) 1/4” (6.3) 3/8” (9.5) 1/4” (6.3) 1/2” (12.7) (9.5) 1/2” (12.7) 3/8” Wt./C Lbs. kg C 3/4” (19.0) 1” 11/4” 7/8” 1” 1 1 /8” 1.2 2.0 2.9 1.6 2.1 2.5 (25.4) (31.7) (22.2) (25.4) (28.6) B2308-B2315 ONE HOLE TUBING STRAP •Material: Sizes 1/4” - 1/2”, ASTM A611 Gr. C 5/8” - 1”, ASTM A1008 SS Gr. 33 Type 1 •Standard finishes: ZN, GRN O.D. Size A Part No. B2308 B2309 B2310 B2311 B2312 B2313 B2314 B2315 1 /4” /16” 3 /8” 1 /2” 5 /8” 3 /4” 7 /8” 1” 5 (6.3) (7.9) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) B 11/32” 13/32” 13/16” 121/64” 125/64” 139/64” 151/64” 21/32” Wt./C Lbs. kg C (26.2) (27.8) (30.1) (33.7) (35.3) (40.9) (45.6) (51.6) .048 .048 .048 .048 .062 .075 .075 .075 (1.2) (1.2) (1.2) (1.2) (1.6) (1.9) (1.9) (1.9) 1.2 1.4 1.6 1.9 2.7 4.3 4.9 5.2 (.5) (.6) (.7) (.8) (1.2) (1.9) (2.2) (2.3) Reference page 188 for general fitting specifications. 199 B 9/32” (7.1) DIA. 13/16” C (20.6) A (.5) (.9) (1.3) (.7) (.9) (1.1) Mini Channel & Fittings •Safety Factor of 2 •Uniform Design Load 40 Lbs. (.18 kN) •Standard finishes: ZN, GRN Econo-Strut E7016 E7016H3/4 •Light duty support for electrical fixtures, conduits and boxes •Standard 1/4”-20 square nut slips into the slot for ease of attachment •Thickness: 16 Ga. (1.5 mm) •Standard lengths: 120” (3.05 m) •Standard finish: Pre-Galvanized •Weight: .45 Lbs./Ft. (.52 kg/m) •Pre-punched holes provide for installation on 11/2” (38.1) centers for 1/4”-20 ATR or for #8 screws or toggle bolts •Thickness: 16 Ga. (1.5 mm) •Standard lengths: 120” (3.05 m) •Standard finish: Pre-Galvanized •Weight: .44 Lbs./Ft. (.50 kg/m) 1/2” INSIDE (12.7) DIMENSION 9/32” (7.1) DIA. 3/16” (4.7) DIA. 3/4” 3/4” (19.0) CENTER TO CENTER HOLE SPACING (19.0) 5/16” 3/8” (9.5) (7.9) Mini Channel & Fittings Design Stress = 25,000 PSI (172 MPa) Section Modulus (S) = .021 in.3 (.34 cm3) Moment of Inertia (I) = .009 in.4 (.37 cm4) Radius of Gyration (r) = .275 in. (.70 cm) To determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. LOAD CHART Beam Span In. mm 12 24 36 48 60 (305) (609) (914) (1219) (1524) Uniform Load Lbs. N 347 173 115 86 69 1543 769 511 382 307 Uniform Load 1/240 Span Lbs. N Deflection In. mm .030 .121 .272 .484 .756 347 143 63 35 23 (.76) (3.07) (6.91) (12.29) (19.20) 1543 636 280 155 102 Deflection 1/240 Span In. mm .05 .10 .15 .20 .25 (1.27) (2.54) (3.81) (5.08) (6.35) E7166 E7212 E7355 •Joins Econo-Strut channels together to provide continuous runs •Includes: 1 pc. Joiner Plate 2 pcs. 1/4”-20 x 1/2” SRHMS •Wt./C 42 Lbs. (19.0 kg) •Used to attach Econo-Strut to lathers channel or other light gauge carrying beams •Wt./C 1 Lb. (.4 kg) •Secures Econo-Strut to bar joists, angle iron, or I-Beams with a maximum flange thickness of 1/4” (6.3) •Includes: 1 Beam Clamp 1 pc. 1/4”-20 x 1” SHHMS 1 pc. 1/4”-20 Square Nut •Wt./C 8 Lbs. (3.6 kg) JOINER PLATE FASTENER CLIP BEAM CLAMP Reference page 188 for general fitting specifications. 200 Typical Econo-Strut Applications Econo-Strut pipe or conduit support. Econo-Strut used as a continuous concrete insert. 201 Mini Channel & Fittings Econo-Strut fixture support secured to the bar joists. Econo-Strut supports electrical box with screws and square nuts. Continuous Concrete Inserts Continuous slot Concrete Inserts are designed to provide a pre-set support system cast in concrete ceilings, walls, and floors to allow flexibility of attachment at any point along the channel. This provides an excellent support system for pipe, conduit, and cable trays. Continuous Concrete Inserts, manufactured from B-Line’s standard channels, have formed anchors spaced on 4 inch (101.6 mm) centers. 3/16” (4.8 mm) nail-holes are provided for securing the inserts to the forms. Available in lengths from 3 inches (7.62 cm) to 240 inches (609.6 cm), Concrete Inserts are shipped complete with end caps and styrofoam filler strips which prevent seepage of concrete into the insert. Styrofoam is easily removed by pulling the convenient pull-tab. Materials & Finishes* Finish Code PLN Finish Plain GRN ZN GALV Dura-Green Electro-Plated Zinc Pre-Galvanized HDG SS4 SS6 Hot-Dipped Galvanized Stainless Steel Type 304 Stainless Steel Type 316 Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC1 Type III ASTM A653 33,000 PSI min. yield ASTM A123 ASTM A240 ASTM A240 *Unless otherwise noted. Concrete Inserts Spot Inserts B-Line’s Spot Inserts provide for economical single attachment points with full flexibility of fastener sizing, but with limited adjustment. These products are made from steel strips in accordance with ASTM A1011, 33,000 PSI min. yield. Standard finish is electro-plated zinc (ASTM B633). Special Concrete Inserts Pre-stressed inserts, inserts with studs welded to the back of the channel, and other types of special inserts are available from B-Line. Test Data Independent Testing Laboratory test data available upon request. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 202 Concrete Inserts Continuous concrete inserts, installed in the ceiling, can be used to support trapeze hangers, suspended pipe racks, cable trays and single or multiple pipe hangers. When installed in walls, continuous concrete inserts can be used as a support for tunnel stanchions, equipment braces, brackets and pipe racks. Use spot inserts for single pipe-support or trapeze type hangers. Spot Inserts offer full flexibility of rod and fastener sizings. Concrete Inserts B-Line Channel can be attached to continuous concrete inserts in walls or ceilings. Channel can also be attached to concrete walls and floors with expansion anchors. Reference page 202 for general fitting and standard finish specifications. 203 Continuous Concrete Inserts B22I CONTINUOUS CONCRETE INSERT 4” (101.6) •Design Load for B22-I-12 thru B22-I25/8” 15/8” 240 is 2,000 lbs. (8.89 kN) per foot of (66.7) (41.3) concrete insert length with safety factor of 3 in 3000 psi concrete. •Loads concentrated within the last 2 inches (50.8 mm) of concrete inserts 8” (203.2 mm) and longer should not 15/8” exceed 1,000 lbs. (4.45kN). (41.3) •Concrete insert should be secured to the STYROFOAM forms on 16” (406.4 mm) to 24” B3322 FILLER (609.6 mm) intervals. END CAP •B22-I continuous concrete inserts are made from B22 channel. Use channel B22-I-3 THRU B22-I-8 nuts designed for use in B22 channel. •B22-I concrete inserts are supplied with MATERIAL: 12 Gauge (2.6) styrofoam fillers. B3322 end caps are furnished with inserts through 8” (203.2 mm) long, and B205 end caps are furnished with inserts 12” (304.8 mm) and longer. •Material: Plain Steel ASTM A1011 33,000 PSI min. yield or Pre-Galvanized Steel ASTM A653SS 33,000 PSI min. yield. •Finish: Plain, Dura-Green, Pre-Galv, HDG 15/8” 11/2” (41.3) (38.1) 3/4” (19.0) 31/8” (79.4) 11/16” (17.4) 15/8” (41.3) .188 KNOCKOUTS FOR NAILING INSERTS TO FORMS B22-I-12 THRU B22-I-240 STYROFOAM FILLER B205 END CAP Length Part No. in. B22-I-3 B22-I-4 B22-I-6 B22-I-8 3” 4” 6” 8” Wt./C Lbs. kg (76) 72 88 120 152 (32.6) (101) (152) (203) 500 800 1000 1200 (39.9) (54.4) (68.9) Length Concrete Inserts Design Load Lbs. kN mm Wt./C Part No. in. mm Lbs. B22-I-12 B22-I-16 B22-I-20 B22-I-24 B22-I-32 B22-I-36 B22-I-40 B22-I-48 B22-I-60 B22-I-72 B22-I-84 B22-I-96 B22-I-108 B22-I-120 B22-I-144 B22-I-168 B22-I-192 B22-I-216 B22-I-240 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” (305) 224 289 353 420 553 620 686 820 1018 1218 1417 1616 1816 2016 2416 2816 3216 3616 4016 (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) kg (101.6) (131.1) (160.1) (190.5) (250.8) (281.2) (311.1) (371.9) (461.7) (552.5) (642.7) (733.0) (823.7) (914.4) (1095.9) (1277.3) (1458.7) (1640.2) (1821.6) Reference page 202 for general fitting and standard finish specifications. 204 (2.22) (3.56) (4.45) (5.34) Continuous Concrete Inserts B32I CONTINUOUS CONCRETE INSERT 4” 25/8” •Design Load for B32-I-12 thru B32-I240 is 2,000 lbs. (8.89 kN) per foot of concrete insert length with safety factor of 3 in 3000 psi concrete. •Loads concentrated within the last 2 inches (50.8 mm) of concrete inserts 8” (203.2 mm) and longer should not exceed 1,000 lbs. (4.45kN). •Concrete insert should be secured to the forms on 16” (406.4 mm) to 24” (609.6 mm) intervals. •B32-I continuous concrete inserts are made from B32 channel. Use channel nuts designed for use in B32 channel. •B32-I concrete inserts are supplied with styrofoam fillers. B3332 end caps are furnished with inserts through 8” (203.2 mm) long, and B206 end caps are furnished with inserts 12” (304.8 mm) and longer. •Material: Plain Steel ASTM A1011 33,000 PSI min. yield or Pre-Galvanized Steel ASTM A653SS 33,000 PSI min. yield. •Finish: Plain, Dura-Green, Pre-Galv, HDG (101.6) (66.7) 15/8” 11/2” (41.3) (38.1) 15/8” B3332 END CAP (41.3) 13/8” (34.9) STYROFOAM FILLER 3/4” (19.0) 27/8” (73.0) 11/16” (17.4) B32-I-3 THRU B32-I-8 MATERIAL: 12 Gauge (2.6) 13/8” .188 KNOCKOUTS FOR NAILING INSERTS TO FORMS B32-I-12 THRU B32-I-240 (34.9) STYROFOAM FILLER B206 END CAP Length Part No. in. B32-I-3 B32-I-4 B32-I-6 B32-I-8 3” 4” 6” 8” Wt./C Lbs. kg (76) 65 80 108 137 (29.5) (101) (152) (203) Wt./C in. B32-I-12 B32-I-16 B32-I-20 B32-I-24 B32-I-32 B32-I-36 B32-I-40 B32-I-48 B32-I-60 B32-I-72 B32-I-84 B32-I-96 B32-I-108 B32-I-120 B32-I-144 B32-I-168 B32-I-192 B32-I-216 B32-I-240 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” (49.0) (62.1) mm Lbs. (305) 202 262 316 376 496 556 616 736 915 1095 1274 1453 1633 1813 2173 2533 2893 3253 3613 (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) 500 800 1000 1200 (36.3) kg (91.6) (118.8) (143.3) (170.5) (225.0) (252.2) (279.4) (333.8) (415.0) (496.7) (577.9) (659.0) (740.7) (822.3) (985.6) (1148.9) (1312.2) (1475.5) (1638.8) Reference page 202 for general fitting and standard finish specifications. 205 (2.22) (3.56) (4.45) (5.34) Concrete Inserts Length Part No. Design Load Lbs. kN mm Continuous Concrete Inserts B52I CONTINUOUS CONCRETE INSERT 29/16” •Design Load for B52-I-12 thru B52-I240 is 1,500 lbs. (6.67 kN) per foot of concrete insert length with safety factor of 3 in 3000 psi concrete. •Loads concentrated within the last 2 inches (50.8 mm) of concrete inserts 8” (203.2 mm) and longer should not exceed 750 lbs. (3.33 kN). •Concrete insert should be secured to the forms on 16” (406.4 mm) to 24” (609.6 mm) intervals. •B52-I continuous concrete inserts are made from B52 channel. Use channel nuts designed for use in B52 channel. •B52-I concrete inserts are supplied with styrofoam fillers. B3352 end caps are furnished with inserts through 8” (203.2 mm) long, and B220 end caps are furnished with inserts 12” (304.8 mm) and longer. •Material: Plain Steel ASTM A1011 33,000 PSI min. yield or Pre-Galvanized Steel ASTM A653SS 33,000 PSI min. yield. •Finish: Plain, Dura-Green, Pre-Galv, HDG 4” (65.1) (101.6) B3352 END CAP 15/8” 11/2” 15/8” (41.3) (38.1) 13/16” (41.3) (20.6) STYROFOAM 25/16” FILLER (58.7) 3/4” (19.0) B52-I-3 THRU B52-I-8 MATERIAL: 12 Gauge (2.6) 11/16” (17.4) 13/16” (20.6) .188 KNOCKOUTS FOR NAILING INSERTS TO FORMS B52-I-12 THRU B52-I-240 STYROFOAM FILLER B220 END CAP Length Wt./C Part No. in. mm Lbs. kg B52-I-3 B52-I-4 B52-I-6 B52-I-8 3” 4” 6” 8” (76) 53 63 85 106 (24.0) (101) (152) (203) Part No. in. B52-I-12 B52-I-16 B52-I-20 B52-I-24 B52-I-32 B52-I-36 B52-I-40 B52-I-48 B52-I-60 B52-I-72 B52-I-84 B52-I-96 B52-I-108 B52-I-120 B52-I-144 B52-I-168 B52-I-192 B52-I-216 B52-I-240 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” 400 500 750 1000 (28.6) (38.5) (48.1) Length Concrete Inserts Design Load Lbs. kN Wt./C mm Lbs. kg (305) 157 202 237 282 373 419 464 556 692 829 965 1107 1237 1374 1648 1922 2196 2470 2744 (71.2) (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) (91.6) (107.5) (127.9) (169.2) (190.0) (210.4) (252.2) (313.9) (376.0 (437.7) (502.1) (561.1) (623.2) (747.5) (871.8) (996.1) (1120.4) (1244.6) Reference page 202 for general fitting and standard finish specifications. 206 (1.78) (2.22) (3.33) (4.45) Spot Inserts B2500 N2500 •Design Load 600 Lbs. (2.67 kN) •Safety Factor of 5 •Order N2500 Nuts Separately •Material: Steel ASTM A1011 33,000 PSI min. yield •Standard finish: ZN •Wt./C 46 Lbs. (20.8 kg) 2” •For use in B2500 Spot Insert •Material: Steel ASTM A36 •Standard finish: ZN 11/4” INSERT SQUARE NUT SPOT INSERT (31.7) 5/16” (7.9) 11/4” (31.7) (50.8) 31/4” Part No. (82.5) N2500-1/4 N2500-5/16 N2500-3/8 N2500-1/2 N2500-5/8 N2500-3/4 N2500-7/8 MATERIAL: 12 Gauge (2.6) 11/2” 19/16” (38.1) (65.0) Thread Size 3/8”-16 1/2-13 5/8”-11 3/4”-10 7/8”-9 •Designed for use where heavy loads are required in curtain wall applications •Design Load is 5000 Lbs. (22.2 kN) with a Safety Factor of 3 •Loading based on two N225 channel nuts spaced 3” (76.2 mm) on center and a minimum of 2” (50.8 mm) from the end of the insert •Styrofoam end caps prevent concrete seepage into the channel •12” (304.8 mm) long insert is anchored into the concrete at a depth of 51/2” (139.7 mm) •Material: 12 Gauge (2.6 mm) thick steel •Standard finish: ZN •Wt./C 42 Lbs. (19.0 kg) •Safety Factor of 5 •To support 10” (250) pipe use B2505 insert with 5/8”-11 Channel Nuts. •To support up to and including 8” (200) pipes use B2506, B2507 and B2508 inserts with the desired Channel Nuts. •Standard finish: ZN Channel End Cap Style Part No. B2505 B2506 B2507 B2508 B22 B32 B42 B52 (5.9) (5.9) (5.4) (5.4) (5.0) (4.5) (4.1) CHANNEL END CAPS SIZE SPOT INSERT Part No. 13 13 12 12 11 10 9 5/16”-18 B2505 THRU B2508 HEAVY DUTY SPOT INSERT Wt./C Lbs. kg 1/4”-20 B2503 THREAD SIZE B3322 B3332 B3342 B3352 25/8” (66.7) 51/16” (128.6) Design Load Lbs. kN Maximum Pipe Size 1200 1000 1000 1000 10” 8” 8” 8” (5.34) (4.45) (4.45) (4.45) Wt./C Lbs. kg 96 88 77 69 (250) (200) (200) (200) (43.5) (39.9) (34.9) (31.3) Concrete Inserts B2501 LIGHT DUTY SPOT INSERT 51/2” (139.7) 15/8” 2” 5/32” (4.0) (41.3) (50.8) 15/8” DIA. NAIL HOLES •Safety Factor of 2 •The concrete attachment problem solver for light duty applications. •Fast and easy applications. •No concrete leakage problems. •One piece unitized construction. •Color coded cap on thread for rod size identification and to prevent concrete seepage. (1/4”-Yellow, 3/8”-Red, 1/2”-Blue) A H (41.3) 8” 11/4” (203.2) (31.7) Design Load 12” (304.8) STYROFOAM END CAPS Part No. & Size B2501-1/4 B2501-3/8 B2501-1/2 Height A (61.9) 27/16” (77.8) 31/16” (104.8) 41/8” Height H 7/8” (22.2) 17/8” (47.6) 17/8” (47.6) Reference page 202 for general fitting and standard finish specifications. 207 Design Load Lbs. kN (1.11) 250 (2.71) 610 (3.91) 880 Wt./C Lbs. kN (7.2) 16 (9.9) 22 (11.7) 26 Insert Accessories B205, B206, B220 B3322, B3332, B3342, B3352 •UL listed for raceway use only •Material: 12 Gauge (2.6) •Standard finish: ZN •UL listed for raceway use only •Material: 14 Gauge (1.9) •Standard finish: ZN X TYPE END CAPS Y TYPE END CAPS 3/8” (9.5) DIA. A 25/8” (66.7) A 1” 113/16” (25.4) (46.0) Part No. B205 B206 B220 Use With B22 B32 B52 Wt./C Lbs. kg A 121/32” (42.0) 113/32” 27/32” (35.7) 10 8 4 (21.4) B380 (4.5) (3.6) (1.8) •Used at splice points to prevent concrete seepage in long continuous runs of concrete inserts. A •Material: 18 Gauge (1.2) •Standard finish: GALV 1 Use With B3322 B3332 B3342 B3352 B22 B32 B42 B52 Wt./C Lbs. kg A 1.270 1.000 .645 .460 (32.2) (25.4) (16.4) (11.7) 15 15 15 15 (6.8) (6.8) (6.8) (6.8) B22IFS-B52IFS 13/4” JOINT SPLICE PLATE Part No. STYROFOAM FILLER STRIP (44.1) 29/32” (23.0) 15/8” /16” (41.3) (1.6) B A Concrete Inserts Part No. B380-22 B380-32 B380-42 B380-52 Use With B22 B32 B42 B52 Wt./C Lbs. kg A 15/8” (41.3) 13/8” 1” 13/16” (34.9) (25.4) (20.6) 11 10 9 7 (5.0) (4.5) (4.1) (3.2) A Part No. Ft. mm B22-IFS B32-IFS B52-IFS 4’ 4’ 4’ (1219) (1219) (1219) Wt./C Lbs. kg B 17/32” 1” 21/32” (309) (254) (167) 10 9 7 PIPE SLEEVE FASTENERS •Allows for rigid attachment of pipe sleeves to wall and floor forms for concrete pouring. •Accommodates Schedule 40, Schedule 80, or 5/16" (8) and smaller wall thickness. •Simply installed with a hammer. Part No. BD40 Sleeve Diameter All Dia. NEW BD40 BE-5-8 & BE-9-12 Wall Thickness 5/16” & under BE-5-8 6” Schedule 80 pipe BE-9-12 9” - 14” Schedule 80 pipe Reference page 202 for general fitting and standard finish specifications. 208 (4.5) (4.1) (3.2) Anchors WEDGE ANCHOR •Safety Factor of 4 Catalog Number Thread Size AWA-37-225 AWA-37-275 AWA-37-300 AWA-37-375 AWA-37-500 AWA-50-275 AWA-50-375 AWA-50-425 AWA-50-550 AWA-50-700 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 Overall Length in. mm 21/4" 23/4" 3" 33/4" 5" 23/4" 33/4" 41/4" 51/2" 7" (57) (70) (76) (95) (127) (70) (95) (108) (140) (178) Max. Mat'l. Thickness to be Anchored in. mm 3/8" 7/8" 11/8" 17/8" 31/8" 1/8" 1" 11/2" 23/4" 41/4" (9) (22) (28) (47) (79) (3) (25) (38) (70) (108) Minimum Embedment Depth in. mm Drill Hole Diameter in. mm 3/8” 3/8” 11/2" (38) 3/8” 3/8” 3/8” 1/2” 1/2” 21/4" (57) 1/2” 1/2” 1/2” (10) (10) (10) (10) (10) (13) (13) (13) (13) (13) Note: For Information on wedge anchors refer to Cooper B-Line Anchor catalog. DROP-IN •Safety Factor of 4 Catalog Number Thread Size ADI-25 ADI-37 ADI-50 ADI-62 ADI-75 1/4”-20 Length in. 1” 19/16” 2” 21/2” 31/8” 3/8”-16 1/2”-13 5/8”-11 3/4”-10 mm (25) (40) (51) (64) (79) Thread Depth in. mm 7/16” (11) 5/8” (16) 13/16” (21) 13/16” (30) 13/16” (30) Drill/Hole Diameter in. mm 3/8” (10) 1/2” (13) 5/8” (16) 7/8” (22) 1” (25) Note: For Information on drop-in anchors refer to Cooper B-Line Anchor catalog. RAPID ROD™ HANGERS FOR CONCRETE Catalog Number ARC-1-RH25 ARC-1-RH37 ARC-1-SW37 Size Drill/Hole Diameter in. mm Rod Size in. mm x 11/2” 5/16” x 11/2” 5/16” x 11/2” (8 x 38) 1/4” (6) 1/4”-20 (8 x 38) 1/4” (6) 3/8”-16 (8 x 38) 1/4” (6) 3/8”-16 5/16” Allowable Pull-Out Load Lbs. kN 702 702 -- Allowable Shear Load Lbs. kN (3.1) -- -- (3.1) -- -- -- 512 (2.3) PLASTIC SCREW ANCHORS •Safety Factor of 4 APS-4-87 APS-8-125 APS-12-150 Screw Size #4, #6, & #8 #8, #10, & #12 #12, #14, & #16 Anchor Length in. mm Drill/Hole Diameter in. mm 7/8” (22) 3/16” (5) 11/4” (32) 1/4” (6) 11/2” (38) 5/16” (8) Allowable Pull Out Load Lbs. kN 50 100 150 (0.2) (0.4) (0.6) Note: For Information on plastic screw anchors refer to Cooper B-Line Anchor catalog. Reference page 202 for general fitting and standard finish specifications. 209 RH SW Note: For Information on Rapid Rod hangers refer to Cooper B-Line Anchor catalog. Catalog Number Concrete Inserts •Safety Factor of 4 Slotted Angle B-Line Slotted Angle is an all-purpose framing system, roll formed from high strength steel strips. It is designed to be used as economical shelving, racks or electrical and mechanical supports. The unique pattern of horizontal and vertical slots permits full flexibility. Three basic sizes are available for light, medium, and heavy duty applications. Materials & Finishes* Finish Code PLN Finish Plain ZN GRN GALV Electro-Plated Zinc Dura-Green Pre-Galvanized Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC3 ASTM A653 33,000 PSI min. yield *Unless otherwise noted. Lengths Standard lengths are 10’ (3.05 m) and 12’ (3.66 m). Slotted Angle is shipped in ten piece bundles complete with 75 pieces of 3/8” x 3/4” (19mm) hex head cap screws and 3/8” hex nuts. Metric Slotted Angle Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 210 Slotted Angle Sizes 13/32” (10.3) x 9/16” (14.3) SA158 TRANSVERSE SLOTS •14 Gauge (1.9) •15/8” x 15/8” •Standard finishes: ZN, GRN •Wt./Ft. .66 Lbs. (.98 kg/m) 13/32” (10.3) x 9/16” (14.3) LONGITUDINAL SLOTS 137/64” (40.1) 3/4” (19.0) 11/2” (38.1) 3/4” (19.0) 10’ (3.05 m) 12’ (3.66 m) 137/64” (40.1) SA276 13/32” (10.3) x 9/16” (14.3) TRANSVERSE SLOTS •14 Gauge (1.9) •15/8” x 23/8” •Standard finishes: ZN, GRN •Wt./Ft. .78 Lbs. (1.17 kg/m) 13/32” (10.3) x 9/16” (14.3) LONGITUDINAL SLOTS 137/64” (40.1) 3/4” (19.0) 11/2” (38.1) 3/4” (19.0) 10’ (3.05 m) 12’ (3.66 m) 25/16” (58.7) SA318 13/32” (10.3) x 9/16” (14.3) TRANSVERSE SLOTS •12 Gauge (2.6) •15/8” x 31/8” •Standard finishes: ZN, GRN •Wt./Ft. 1.32 Lbs. (1.96 kg/m) 13/32” (10.3) x 9/16” (14.3) LONGITUDINAL SLOTS 137/64” (40.1) 3/4” 11/2” (19.0) (38.1) 10’ (3.05 m) 12’ (3.66 m) 13/32” (10.3) HOLES ON 3” (76.2) CENTERS 33/32” (78.6) Reference page 210 for general fitting and standard finish specifications. 211 Slotted Angle 3/4” (19.0) Slotted Angle Beam Loading & Combinations BEAM SECTIONS A B Single Piece (Up) C Single Piece (Level) F D Single Piece (Down) G Z-Section Narrow Channel H Broad Channel with Stiffener J T-Section Single Piece with Stiffener H Broad Channel I E Z-Section with Stiffener K L T-Section with Stiffener J-Section I-Section For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations. Beam Sections illustrated are single sections, except J, N, and P. BEAM LOADING SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9) Slotted Angle 24” (609 mm) 36” (914 mm) Lbs. N Lbs. N 48” (1219 mm) Lbs. N Beam Span 60” (1524 mm) Lbs. N 72” (1829 mm) Lbs. N 84” (2133 mm) 96” (2438 mm) Lbs. N Lbs. N A 825 (3670) 525 (2335) 340 (1512) 230 (1023) 180 (800) – – – – B 1100 (4893) 800 (3558) 540 (2402) 370 (1646) 250 (1112) – – – – C 1100 (4893) 800 (3558) 540 (2402) 370 (1646) 250 (1112) – – – – D 1300 (5782) 900 (4003) 625 (2780) 450 (2001) 330 (1468) 275 (1223) 200 (889) G 1900 (8451) 1360 (6049) 1050 (4670) 825 (3670) 660 (2936) 530 (2357) 400 (1779) H 2300 (10231) 1850 (8229) 1450 (6450) 1100 (4893) 950 (4226) 800 (3558) 700 (3114) I 2200 (9786) 1650 (7339) 1225 (5449) 930 (4137) 700 (3114) 550 (2446) 450 (2001) Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span, multiply uniform load by 0.5. Reference page 210 for general fitting and standard finish specifications. 212 Slotted Angle Beam Loading BEAM LOADING SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9) Beam Span 24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm) Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N A – – 680 (3025) 450 (2001) 340 (1512) – – – – – – – – – – B – – 830 (3692) 550 (2446) 360 (1601) 210 (934) 150 (667) – – – – – – C – – 1540 (6850) 1060 (4715) 800 (3558) 610 (2713) 480 (2135) 340 1512 250 (1112) – – D – – 1880 (8362) 1280 (5694) 970 (4315) 820 (3647) 650 (2891) 550 (2446) 420 (1868) 340 (1512) E – – 2110 (9386) 1730 (7695) 1460 (5775) 1250 (5560) 1090 (4848) 920 (4092) 820 (3647) 680 (3025) 710 (3158) 550 (2446) 420 (1868) 320 (1423) 1040 (4626) 820 (3647) 640 (2847) 490 (2179) 3480 (15480) 2430 (10809) 1890 (8407) 1620 (7206) 1430 (6361) 1270 (5649) 1160 (5160) 1030 (4581) 5780 (25711) 3640 (16191) 2820 (12544) 2200 (9786) 1700 (7562) 1350 (6005) 1060 (4715) 850 (3781) 680 (3025) 1360 (6049) 1090 (4848) (3114) F 4290 (19083) 2510 (11165) 1790 (7962) 1330 (5916) G 4320 (19216) 3000 (13344) 2140 (9519) 1600 (7117) 1290 (5738) H I – – 980 (4359) J – – 3660 (16280) 2840 (12633) 2230 (9919) 1720 (7651) 874 (3888) 700 K – – 4910 (21841) 3830 (17036) 3000 (13344) 2550 (11343) 2190 (9741) 1880 (8362) 1640 (7295) 1430 (6361) L – – 6360 (28290) 4590 (20417) 3470 (15435) 2910 (12944) 2550 (11343) 2240 (9964) 2010 (8941) 1840 (8185) Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span, multiply uniform load by 0.5. BEAM LOADING SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6) Beam Span 24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm) Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N A – – 1140 (5071) 850 (3781) 690 (3069) B – – 1250 (5560) 850 (3781) 600 (2669) C – – 400 (1779) 4800 (21351) 2750 (12232) 1800 (8007) 1280 (5694) 1000 (4448) – – – – – – – – – – – – – – – 790 (3514) – – – – 610 (2713) – – – 3900 (17348) 2690 (11966) 2050 (9119) 1700 (7562) 1480 (6583) 1280 (5694) 1100 (4893) 960 (4270) E – – 4160 (18504) 3560 (15835) 3130 (13923) 2750 (12232) 2400 (10676) 2170 (9652) 1950 (8674) 1780 (7918) 1750 (7784) 1350 (6005) 1020 (4537) 700 (3114) G 10600 (47151) 6050 (26912) 4440 (19750) 3330 (14812) 2670 (11877) 2120 (9430) 1660 (7384) 1210 (5382) 1000 (4448) 6100 (27134) 4620 (20551) 3670 (16325) 3110 (13834) 2680 (11921) 2380 (10587) 2100 (9341) 1950 (8674) 13700 (60940) 7800 (34696) 5900 (26244) 4600 (20462) 3800 (16903) 3190 (14190) 2630 (11699) 2170 (9652) 1810 (8051) F H I 8180 (36386) 5000 (22241) 3650 (16236) 2750 (12232) 2200 (9786) – – J – – 7900 (35141) 6300 (28024) 5050 (22463) 4070 (18104) 3240 (14412) 2630 (11699) 2170 (9652) K – – 10050 (44704) 8000 (35586) 6320 (28113) 5350 (23798) 4650 (20684) 4040 (17971) 3520 (15658) 3120 (13878) L – – 12700 (56492) 9550 (42480) 7540 (33539) 6540 (29091) 5730 (25488) 5030 (22374) 4520 (20106) 4000 (17793) 1810 (8051) Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity at mid-span, multiply uniform load by 0.5. Reference page 210 for general fitting and standard finish specifications. 213 Slotted Angle D Slotted Angle Column Loading & Combinations COLUMN SECTIONS M N N T-Section Single Piece N Broad Channel Section P P O Narrow Channel Section P Dual Channel Section T-Channel Section O Uneven Channel Section Uneven T-Section Q R T-Channel Section I-Section Uneven I-Section For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A number of these combinations are illustrated above. Refer to the following table for load capacities of these combinations. COLUMN LOADING - SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9) 36” (914 mm) Lbs. N Column Height 48” (1219 mm) 60” (1524 mm) Lbs. N Lbs. N M 1450 (6450) 1150 (5115) 950 (4226) 750 (3336) N 3850 (17125) 3500 (15569) 3000 (13344) 2500 (11120) 72” (1829 mm) Lbs. N Column Loads assume no lateral support. COLUMN LOADING - SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9) Column Height 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm) Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N M N O P Q R 2280 4760 4940 7270 9520 9865 (10142) (21173) (21974) (32338) (42347) (43881) 1970 4490 4680 6920 8970 9330 (8763) (19972) (20817) (30781) (39900) (41502) 1520 3995 4310 6370 7990 8620 (6761) (17770) (19172) (28335) (35541) (38343) 1070 3140 3870 5840 6280 7715 (4759) (13967) (17214) (25977) (27935) (34318) 660 2340 3665 4930 4660 6740 (2936) (10409) (16303) (21930) (20729) (29981) – 1750 2700 3850 3500 5365 – – – – – 2060 (9163) 2870 (12766) – – 4115 (18304) (7784) (12010) (17125) (15569) (23865) – – 1610 2060 – 3210 – – (7161) (9163) – (14279) Column Loads assume no lateral support. Slotted Angle COLUMN LOADING - SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6) Column Height 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm) Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N Lbs. N M N O P Q R 3470 7970 8770 12560 15940 17550 (15435) (35452) (39011) (55869) (70904) (78066) 2870 (12766) 1970 (8763) 1280 (5694) – 7360 (32739) 6570 (29225) 5270 (23442) 3670 8580 (38166) 8180 (36386) 7690 (34207) 6970 11970 (53245) 11360 (50532) 10480 (46617) 9470 14750 (65611) 13160 (58538) 10560 (46973) 7370 17150 (76287) 16360 (72773) 15360 (68324) 13970 – (16325) (31004) (42124) (32783) (62141) – 2580 6260 8370 5170 12570 – (11476) (27846) (37231) (22997) (55914) – – – – 5460 (24287) 6880 (30604) – – 10970 (48797) Column Loads assume no lateral support. Reference page 202 for general fitting and standard finish specifications. 214 – – 4460 5370 – 8960 – – (19839) (23887) – (39856) Slotted Angle Kits & Fittings AHHK-1/4 & AHHK-3/8 8 Hanging rods come in 72” lengths. AIR HANDLER HANGING KIT Rods can be field cut for proper height requirement. •Standard finishes: ZN •Load CapacityPer Kit: 400 Lbs. (181.4 kg) 2 or 3 4 5 Item # Description Quantity 1 6 7 AHHK AHHK 1/4 3/8 1 2 3 4 5 6 7 8 9 Rod Hanger Fitting Lag Screw Hex Head Cap Screw Flat Washer (For HHCS) Hex Nuts (For HHCS) Hex Nuts (For Hanging Rods) Flat Washer (See Note 1) Hanging Rods (72” Long) SA158 (36” Long) 4 4 4 4 4 16 16 4 2 4 4 4 4 4 16 4 2 NEW Note 1: Flat washers are required for 1/4”-20 hanging rods only. SA101 SA102 SA154 •Standard finishes: ZN, GRN •Wt./C 67 Lbs. (30.4 kg) •Standard finishes: ZN, GRN •Wt./C 15 Lbs. (6.8 kg) •Safety Factor of 1.5 •300 Lbs. (136.1 kg) maximum load capacity •Caster material: Phenolic •Standard finishes: ZN, GRN •Wt./Ea. 2.0 Lbs. (.91 kg) CONNECTION PLATE RIGID CASTER ANGLE BRACE 53/32” (129.4) 12 GAUGE 29/32” 33/16” 4” (80.9) (101.6) 41/2” (114.3) 14 GAUGE (57.9) 51/4” 73/8” (187.3) 4” (101.6) DIA. WHEELS (133.4) 33/16” (80.9) SA155 SWIVEL CASTER •Safety Factor of 1.5 •300 Lbs. (136.1 kg) maximum load capacity •Caster material: Phenolic •Standard finishes: ZN, GRN •Wt./Ea. 2.2 Lbs. (1.0 kg) 4” (101.6) SA110 SA131 •Standard finishes: •Wt./Ea. 16 Lbs. (7.26 kg) •Hole pattern is identical to the hole pattern in slotted angles •Standard length: 10’ (3.05 m) •Standard finishes: Pre-Galv. (GALV) •Material thickness: 14 gauge (1.9) SLOTTED ANGLE CUTTER SLOTTED STRAP 41/2” (114.3) 15/16” 51/4” (133.4) (33.3) CLEATS: To reinforce load-bearing joints, cleats can be field made by cutting 21/4” (57.1) long segments from the widest slotted angle available. Use SA276 for light duty cleats and SA318 for heavy duty cleats. SPLICE PLATES: To assemble two pieces of slotted angle using a butt joint requires a 6” (152.4) splice plate for reinforcement. Reference page 210 for general fitting and standard finish specifications. 215 Slotted Angle 4” (101.6) DIA. WHEELS Reference Data METRIC CONVERSION CHART To Convert From To Multiply By radian (rad) degree 0.01745329 57.29578 Area foot2 inch2 circular mil sq. centimeter (cm2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square inch (in2) foot2 inch2 circular mil 0.09290304 0.00064516 0.0000000005067075 0.1550003 10.76391 1550.003 1973523000.0 Temperature degree Fahrenheit degree Celsius degree Celsius degree Fahrenheit t°C=(t°F -32)/1.8 t°F=1.8t°C+32 Force pounds-force (lbf) newtons (N) 4.448222 Reference Data Angle degree radian (rad) To Convert From Bending Moment or Torque lbf • ft lbf • in N•m N•m Mass ounce (avoirdupois) pound (avoirdupois) ton (short, 2000 lb) ton (long, 2240 lb) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) Mass Per Unit Length lb/ft lb/in kg/m kg/m Mass Per Unit Volume lb/ft3 lb/in3 kg/m3 kg/m3 lbs/ft3 Mass Per Unit Area lb/ft2 kg/m2 Pressure or Stress lbf/in2 (psi) kip/in2 (ksi) lbf/in2 (psi) pascal (Pa) pascal (Pa) megapascals (MPa) To Convert From To Multiply By Length foot (ft) inch (in) mil inch (in) meter (m) meter (m) meter (m) micrometer (µm) meter (m) meter (m) meter (m) micrometer (µm) foot (ft) inch (in) mil inch (in) 0.3048 0.0254 0.0000254 25400.00 3.280840 39.37008 39370.08 0.00003937008 Volume foot3 inch3 cubic centimeter (cm2) cubic meter (m3) cubic meter (m3) gallon (U.S. liquid) cubic meter (m3) cubic meter (m3) cubic inch (in3) foot3 inch3 cubic meter (m3) 0.02831685 0.00001638706 0.06102374 35.31466 61023.76 0.003785412 S (m3) I (m4) E (Pa) S (in3) I (in4) E (psi) 0.00001638706 0.0000004162314 6894.757 61023.74 2402510.0 0.0001450377 Section Properties section modulus S (in3) moment of inertia I (in4) modulus of elasticity E (psi) section modulus S (m3) moment of inertia I (m4) modulus of elasticity E (Pa) To Multiply By newton meter (N•m) newton meter (N•m) lbf • ft lbf • in 1.355818 0.1129848 0.7375621 8.850748 kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) ounce (avoirdupois) pound (avoirdupois) ton (short, 2000 lb) ton (long, 2240 lb) 0.02834952 0.4535924 907.1847 1016.047 35.27396 2.204622 0.001102311 0.0009842064 kilogram per meter (kg/m) kilogram per meter (kg/m) lb/ft lb/in 1.488164 17.85797 0.6719689 0.5599741 kilogram per cubic meter (kg/m3) kilogram per cubic meter (kg/m3) lb/ft3 lb/in3 lbs/in3 16.01846 27679.9 0.06242797 0.0000361273 1728.0 kilogram per square meter (kg/m2) pound per square foot (lb/ft2) 4.882428 0.2048161 pascal (Pa) pascal (Pa) megapascals (MPa) pound-force per square inch (psi) kip per square inch (ksi) lbf/in2 (psi) 6894.757 6894757.0 0.006894757 0.0001450377 0.0000001450377 145.0377 216 Abbreviations Defl. = Deflection S.F. = Safety Factor Ft. = Feet Pre-galv. = Pre-galvanized Steel K Factor = Deflection Divided by load in Lbs./Ft. o.c. = On Center PVC = Poly Vinyl Chloride In. = Inch psi = Pounds per Square Inch wt./c = Weight pre 100 pieces Metric Symbols m = meter cm = centimeter mm = millimeter µm = micrometer kg = kilogram N = newton kN = kilonewton Pa = pascal MPa = megapascal Reference Data DESIGN LOAD DATA (For typical channel-fitting connections when USED IN PAIRS). 90° Fittings Lbs. 1500 1000 750 kN (6.67) (4.45) (3.34) Lbs. 1000 650 500 kN (4.45) (2.89) (2.22) Lbs. 2000 1500 900 kN (8.90) (6.67) (4.00) Lbs. 1500 1150 650 kN (6.67) (5.12) (2.89) Lbs. 1500 1000 1000 kN (6.67) (4.45) (4.45) Lbs. 1000 650 500 kN (4.45) (2.89) (2.22) Design load data includes a safety factor of 2.5 (safety factor = ratio of ultimate load to design load). 90° Fittings Channel Thickness (2.6) 12 ga. (1.9) 14 ga. (1.5) 16 ga. Lbs. 2500 2000 1500 kN (11.12) (8.90) (6.67) Lbs. 2000 1650 1250 kN (8.90) (7.34) (5.56) Flat Fittings Lbs. 3000 2000 1500 kN (13.34) (8.90) (6.67) 217 Lbs. 2500 1650 1250 kN (11.12) (7.34) (5.56) Lbs. 1000 500 600 kN (4.45) (3.56) (2.67) Lbs. 1000 800 600 kN (4.45) (3.56) (2.67) Reference Data Channel Thickness (2.6) 12 ga. (1.9) 14 ga. (1.5) 16 ga. Reference Data General Notes for Strut-Type Channel Raceway UL Guide RIUU - Cooper B-Line, Inc., Highland, IL 62249 December 11, 1998 (C) File No. E29637 FLUORESCENT AND INCANDESCENT LIGHTING Suitable for not more than the number of wires of the sizes and types indicated in the following tables. Intended to enclose circuits operating at potentials not exceeding 600 volts between conductors. In all cases, the B217-20 or B217P snap-in cover is required to complete raceway closure. When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG. Reference Data ® B-Line’s strut-type channel raceways and fittings are manufactured and tested to comply with the UL Standard for Safety for Strut-Type Channel Raceways and Fittings (UL 5B) in accordance with Article 384 of the 2002 National Electrical Code, NFPA 70. 1. Support spans for strut-type channel raceway shall not exceed 10 foot intervals. 2. No conductor larger than that for which the raceway is listed shall be installed in strut-type channel raceways. No wires under 14AWG or over 6AWG are allowed in any of B-Line’s strut-type channel raceway. See tables 1, 2 and 3 below for a listing of the approved conductors for B-Line’s strut-type channel raceways. 3. The number of conductors permitted in strut-type channel raceway shall not exceed the percentage fill using Table 384-22 and the applicable outside diameter of specific types and sizes of wire given in the tables in chapter 9 of the National Electrical Code. Table 384-22 lists two different percent fill areas depending on the use of internal or external joiners. Use 40% area fill with external joiners and 25% area fill for internal joiners. 4. Items in the electrical section of the B-Line Strut Systems Catalog identified by the UL symbol provide for electrical continuity. Other items require the use of a separate grounding wire. 5. If strut-type channel raceway is connected to another wiring system, the raceway must be field-tapped adjacent to the wire entry point to accept a #10-32 or larger grounding screw. A plated or stainless steel screw may be used. A sheet metal screw is not acceptable. Drill and tap the grounding wire hole before installing wires in raceway or move installed wires out of the way to avoid damage. After drilling and tapping, remove metal chips and burrs before installing screw. TABLE 1: MAXIMUM NUMBER OF WIRES (Adjusted per NEC Table 384.22 for 40% fill) Use this table to determine the type and number of conductors for use with B-Line’s strut-type channel raceway using external joiners. This table applies for all installations except for the support and supply of electric discharge type lighting fixtures. See table 2 and 3 for further information. Insulation Type FEP, FEPB RH, RHH, RHW T, TW THHN, THWN THW XHHW Wire Size AWG. B11 B11K06 B12 B12K06 B22 B22K06 B24 B24K06 B26 B26K06 B32 B32K06 B56 B56K06 14 12 10 8 6 14 12 10 8 6 14 12 10 8 6 14 12 10 8 6 14 12 10 8 6 14 12 10 8 6 172 126 90 51 24 52 45 37 20 14 124 95 69 36 21 178 130 82 46 33 82 66 52 29 21 124 95 71 37 27 127 92 66 38 17 38 33 27 14 10 91 70 51 26 15 131 95 60 34 24 61 49 38 21 15 91 70 52 27 20 81 59 42 24 11 24 21 17 9 6 58 45 33 17 9 84 61 38 21 15 39 31 24 13 10 58 45 33 17 13 81 59 42 24 12 26 22 18 10 7 58 45 33 18 10 84 61 38 22 16 39 31 24 14 10 58 45 33 19 14 81 59 42 24 12 27 23 19 10 7 58 45 33 19 11 84 61 38 22 16 39 31 24 15 11 58 45 33 19 14 67 49 35 20 9 20 17 14 7 5 48 37 27 14 8 69 50 32 17 12 32 26 20 11 8 48 37 28 14 10 36 26 19 11 5 12 10 8 4 3 26 20 14 8 5 37 27 17 10 7 17 14 11 6 5 26 20 15 8 6 218 Reference Data TABLE 2: MAXIMUM NUMBER OF WIRES Also suitable for the number of wires in table below when installed to support and supply electric discharge type lighting fixtures when raceway wiring is suitable for at least 70°C and clearance between fixture and raceway is at least 1/8”. In all cases, a snap-in cover is required to complete the raceway enclosure. Wire Size B56 B56K06 14 13 10 10 10 10 10 6 12 13 10 10 10 10 10 6 10 13 10 8 8 8 6 – 8 10 8 6 6 6 4 – 6 8 6 4 4 4 3 – When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG. TABLE 3: MAXIMUM NUMBER OF WIRES Also suitable for the number of wires in table below when installed to support and supply electric discharge type lighting fixtures when raceway wiring is suitable for 75°C, or wiring suitable for 60°C if a minimum clearance between fixture and raceway is at least 1/2”. In all cases, a snap-in cover is required to complete the raceway enclosure. Wire Size Raceway Catalog Wires B11 B12 B22 B24 B26 B32 B11K06 B12K06 B22K06 B24K06 B26K06 B32K06 Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW B56 B56K06 14 10 10 10 10 10 10 4 12 10 10 10 10 10 10 3 10 8 5 5 5 5 5 – 8 6 4 4 4 4 4 – 6 4 4 4 4 4 4 – When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 AWG. 219 Reference Data Raceway Catalog Wires B11 B12 B22 B24 B26 B32 B11K06 B12K06 B22K06 B24K06 B26K06 B32K06 Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW Reference Data The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported, single span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below. Load Factor LOAD AND SUPPORT CONDITION Reference Data Simple Beam - Uniform Load Deflection Factor 1.00 1.00 .50 .80 Simple Beam - Two Equal Concentrated Loads at 1/4 Points 1.00 1.10 Beam Fixed at Both Ends - Uniform Load 1.50 .30 Beam Fixed at Both Ends - Concentrated Load at Center 1.00 .40 Cantilever Beam - Uniform Load .25 2.40 Cantilever Beam - Concentrated Load at End .12 3.20 1.30 .92 1.00 .42 Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span .62 .71 Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans .67 .48 Span Simple Beam - Concentrated Load at Center Continuous Beam - Two Equal Spans - Uniform Load on One Span Span Span Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans EXAMPLES: PROBLEM: Calculate the maximum allowable load and corresponding deflection of a simply supported B22 beam with a concentrated load at midspan as shown. PROBLEM: Calculate the maximum allowable load and corresponding deflection of a cantilever B52 beam with a uniformly distributed load. 96” SOLUTION: From beam load chart for B22 (page 22), maximum allowable load is A and the corresponding deflection is B. Multiplying by the appropriate factors shown in the chart above. SOLUTION: From beam load chart for B52 (page 33), maximum allowable load is A and the corresponding deflection is B. Multiplying by the appropriate factors shown in chart above. LOAD = A x load factor = _______ DEFLECTION = B x deflection factor = LOAD = A x load factor = _______ DEFLECTION = B x deflection factor = _______ 220 Reference Data RIGID STEEL CONDUIT (HEAVY WALL CONDUIT) Nominal Conduit Size In. mm (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 0.493 0.632 0.836 1.063 1.394 1.624 2.083 2.489 3.090 3.570 4.050 5.073 6.093 (17.1) (21.3) (26.7) (33.4) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3) (12.5) (16.0) (21.3) (27.0) (35.4) (41.3) (52.9) (63.2) (78.5) (90.7) (102.9) (128.9) (154.8) Minimum Weight Per 100 Ft. (30.5m) with Couplings Attached Lbs. kg Weight of Conduit and Conductors Per 100 Ft. (30.5m)* Lbs. kg 51.5 79.0 105.0 153.0 201.0 249.0 332.0 527.0 682.6 831.0 972.3 1313.6 1745.3 65.1 101.1 145.8 219.3 318.3 408.8 593.8 901.0 1259.0 1604.0 1967.0 2876.0 4003.0 (23.4) (35.8) (47.6) (69.4) (91.2) (113.0) (150.6) (239.1) (309.6) (376.9) (441.0) (595.9) (791.7) (29.5) (45.9) (66.1) (99.5) (144.4) (185.4) (269.3) (408.7) (571.1) (727.6) (892.2) (1304.5) (1815.7) Dimensions taken from ANSI C80.1-1977. *Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. INTERMEDIATE METAL CONDUIT (IMC) Nominal Conduit Size In. mm 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” (25) (32) (40) (50) (65) (80) (90) (100) Nominal Inside Diameter In. mm Outside Diameter In. mm 0.815 1.029 1.290 1.638 1.883 2.360 2.857 3.476 3.971 4.466 .675 .879 1.120 1.468 1.703 2.170 2.597 3.216 3.711 4.206 (20.7) (26.1) (32.7) (41.6) (47.7) (59.9) (72.5) (88.3) (100.8) (113.4) Minimum Weight Per 100 Ft. (30.5m) with Couplings Attached Lbs. kg 60.0 82.0 116.0 150.0 182.0 242.0 428.0 526.0 612.0 682.0 (17.1) (22.3) (28.4) (37.3) (43.3) (55.1) (66.0) (81.7) (94.3) (106.8) (27.2) (37.2) (52.6) (68.0) (82.5) (109.7) (194.1) (238.6) (277.6) (309.4) Weight of Conduit and Conductors Per 100 Ft. (30.5m)* Lbs. kg 82.1 122.8 182.3 267.3 341.8 503.8 775.0 1069.0 1346.0 1632.0 (37.2) (55.7) (82.7) (121.2) (155.0) (228.5) (351.5) (485.0) (610.8) (740.5) *Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Rigid and Intermediate Metal Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each outlet box, junction box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be supported in accordance with NEC Article 345 and 346, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports. NEC TABLE 346-12 Conduit Size In. mm Maximum Support Span Feet Meters 1/2-3/4 (15-20) 10 (3.05) 1 (25) 12 (3.66) 11/4-11/2 (32-40) 14 (4.27) 2-21/2 (50-65) 16 (4.88) 3-6 (80-150) 20 (6.10) 221 Reference Data 3/8” Nominal Inside Diameter In. mm Outside Diameter In. mm Reference Data ELECTRICAL METALLIC TUBING (EMT) — THINWALL CONDUIT Reference Data Nominal Conduit Size In. mm 3/8” (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” (25) (32) (40) (50) (65) (80) (90) (100) Outside Diameter In. mm 0.577 0.706 0.922 1.163 1.510 1.740 2.197 2.875 3.500 4.000 4.500 Inside Diameter In. mm 0.493 0.622 0.824 1.049 1.380 1.610 2.067 2.731 3.356 3.834 4.334 (14.7) (17.9) (23.4) (29.5) (38.3) (44.2) (55.8) (73.0) (88.9) (101.6) (114.3) (12.5) (15.8) (20.9) (26.6) (35.1) (40.9) (52.5) (69.4) (85.2) (97.4) (110.1) Weight Per 100 Ft. (30.5m) Lbs. kg Weight of Conduit and Conductors Per 100 Ft. (30.5m)* Lbs. kg 23.0 28.5 43.5 64.0 95.0 110.0 140.0 205.0 250.0 325.0 370.0 36.6 50.6 84.3 130.3 212.3 269.8 401.8 579.0 826.3 1098.0 1364.0 (10.4) (12.9) (19.7) (29.0) (43.1) (49.9) (63.5) (93.0) (113.4) (147.4) (167.8) (16.6) (23.0) (38.2) (59.1) (96.3) (122.4) (182.3) (262.6) (374.8) (498.0) (618.7) Dimensions taken from ANSI C80.3-1977. *Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Electrical Metallic tubing shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each outlet box, junction box, cabinet or fitting. See NEC Article 348. RIGID ALUMINUM CONDUIT Nominal Conduit Size In. mm 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) Nominal Inside Diameter In. mm Outside Diameter In. mm 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 0.632 0.836 1.063 1.394 1.624 2.083 2.489 3.090 3.570 4.050 5.073 6.093 (21.3) (26.7) (33.4) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3) Minimum Weight Per 100 Ft. (30.5m) with Couplings Attached Lbs. kg 27.4 36.4 53.0 69.6 82.2 115.7 182.5 238.9 287.7 340.0 465.4 612.5 (16.1) (21.2) (27.0) (35.4) (41.2) (52.9) (63.2) (78.5) (90.7) (102.9) (128.9) (154.8) (12.4) (16.5) (24.0) (31.6) (37.3) (52.5) (82.8) (108.4) (130.5) (154.2) (211.1) (277.8) Weight of Conduit and Conductors Per 100 Ft. (30.5m)* Lbs. kg 49.5 77.2 119.3 186.9 242.0 377.5 556.5 815.2 1061.0 1334.0 2028.0 2870.0 (22.5) (35.0) (54.1) (84.8) (109.8) (171.2) (252.4) (369.8) (481.3) (605.1) (919.9) (1301.8) Dimensions taken from ANSI C80.5-1977. *Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Aluminum Rigid Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each outlet box, junction box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be supported in accordance with NEC Table 344.30 (B)(2), provided such supports prevent transmission of stresses to termination where conduit is deflected between supports. NEC TABLE 344.30 (B)(2) Conduit Size In. mm Maximum Support Span Feet Meters 1/2-3/4 (15-20) 10 (3.05) 1 (25) 12 (3.66) 11/4-11/2 (32-40) 14 (4.27) 2-21/2 (50-65) 16 (4.88) 3-6 (80-150) 20 (6.10) 222 Reference Data SCHEDULE 40 PVC PLASTIC PIPE Nominal Pipe Size In. mm (3) 1/4” (6) 3/8” (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) .405 .540 .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 Inside Diameter In. mm .269 .364 .493 .622 .824 1.049 1.380 1.610 2.067 2.469 3.068 3.548 4.026 5.047 6.065 7.981 10.020 11.938 (10.3) (13.7) (17.1) (21.3) (26.7) (33.4) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3) (219.1) (273.1) (323.9) 4.7 8.2 10.9 16.4 21.8 32.1 43.4 51.8 69.5 109.6 143.5 175.6 204.3 281.7 360.9 545.3 791.3 1035.2 (6.8) (9.2) (12.5) (15.8) (20.9) (26.6) (35.1) (40.9) (52.5) (62.7) (77.9) (90.1) (102.3) (128.2) (154.1) (202.7) (254.5) (303.2) 1 cubic ft. of water weighs 62.41 Lbs. 1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) weighs 8.335 Lbs. 1 liter weighs .999 kg. 1/4-20” 5/16-18” 3/8-16” 1/2-13” 5/8-11” 3/4-10” 7/8-9” 1-8” 11/8-7” 11/4-7” 11/2-6” 0.027 0.045 0.068 0.126 0.202 0.302 0.419 0.551 0.693 0.889 1.293 (0.174) (0.290) (0.438) (0.812) (1.303) (1.948) (2.703) (3.561) (4.471) (5.735) (8.342) (3.7) (4.9) (7.4) (9.9) (14.6) (19.7) (23.5) (31.5) (49.7) (65.1) (79.7) (92.7) (127.8) (163.7) (247.3) (358.9) (469.6) Nominal Conduit Size 1/2” Root Area cm2 In.2 Design Load (SF=5) Lbs. kN 240 400 730 1350 2160 3230 4480 5900 7450 9500 13800 7.2 12.7 19.2 29.6 44.9 69.6 108.2 140.0 214.9 317.1 463.9 604.1 756.0 1148.8 1613.0 2713.5 4208.9 5886.4 (2.1) (3.2) (5.8) (8.7) (13.4) (20.4) (31.6) (49.1) (63.5) (97.5) (143.8) (210.4) (274.0) (342.9) (521.1) (731.7) (1230.8) (1909.1) (2670.0) CLAMP SIZING CHART FOR PVC COATED RIGID CONDUIT AND CLAMPS ALL THREADED ROD (ATR) Nominal Size (In) and Thread Weight of Pipe Filled With Water Per 100 Ft. (30.5m) Lbs. kg Weight of Pipe Per 100 Ft. (30.5m) Lbs. kg 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” (1.07) (1.78) (3.24) (6.00) (9.60) (14.37) (19.93) (26.24) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating .020 (.51mm) 0 .020 (.51mm) 0 B2028 B2030 B2032 B2005 B2012 B2013 B2014 B2015 B2016 B2017 B2019 B2020 B2002 B2030 B2032 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 B2002 B2030 B2032 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 B2029 B2003 B2033 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115 CLAMP SIZING CHART FOR PVC COATED THINWALL (EMT) CONDUIT AND CLAMPS (33.14) (42.25) (61.38) Dimensions taken from ANSI B1.1-1982 Unified Inch Screw Threads. All threads are UNCR series. Tabulated loads are based on an allowable tensile stress of 12000 psi (82.7 MPa) reduced by 25% resulting in 9000 psi (62 MPa). From ANSI/MSS SP-58, Table 3. Nominal Conduit Size 3/8” 1/2” 3/4” 1” 11/4” 11/2” 2” 223 (10) (15) (20) (25) (32) (40) (50) Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating .020 (.51mm) 0 .020 (.51mm) 0 B2026 B2027 B2029 B2003 B2004 B2035 B2039 B2026 B2027 B2029 B2031 B2034 B2035 B2039 B2026 B2027 B2029 B2031 B2034 B2035 B2039 B2007 B2008 B2009 B2031 B2034 B2036 B2013 Reference Data 1/8” Outside Diameter In. mm Reference Data COPPER TUBING, TYPE L Reference Data Nominal Tubing Size In. mm 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) Outside Diameter In. mm .375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125 10.125 12.125 (9.5) (12.7) (15.9) (19.1) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4) (257.2) (308.0) Inside Diameter In. mm .315 .430 .545 .666 .785 1.025 1.265 1.505 1.985 2.465 2.945 3.425 3.905 4.875 5.845 7.725 9.625 11.565 (8.0) (10.9) (13.8) (16.9) (19.9) (26.0) (32.1) (38.2) (50.4) (62.6) (74.8) (87.0) (99.2) (123.8) (148.5) (196.2) (244.5) (293.8) Weight of Tubing Per 100 Ft. (30.5m) Lbs. kg 12.6 19.8 28.5 36.2 45.5 65.5 88.4 114.0 175.0 248.0 333.0 429.0 538.0 761.0 1020.0 1930.0 3010.0 4040.0 (5.7) (9.0) (12.9) (16.4) (20.6) (29.7) (40.1) (51.7) (79.4) (112.5) (151.0) (194.6) (244.0) (345.2) (462.7) (875.4) (1365.3) (1832.5) Weight of Tubing Filled With Water Per 100 Ft. (30.5m) Lbs. kg 16.0 26.1 38.6 51.3 66.5 101.3 142.9 191.1 309.1 454.8 628.2 828.3 1057.1 1570.0 2182.9 3961.3 6163.4 8592.8 (7.2) (11.8) (17.5) (23.3) (30.2) (45.9) (64.8) (86.7) (140.2) (206.3) (285.0) (375.7) (479.5) (712.1) (990.2) (1796.8) (2795.7) (3897.6) COPPER TUBING, TYPE K Nominal Tubing Size In. mm 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” 8” 10” 12” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) Outside Diameter In. mm .375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125 10.125 12.125 (9.5) (12.7) (15.9) (19.1) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4) (257.2) (308.0) Inside Diameter In. mm .305 .402 .527 .652 .745 .995 1.245 1.481 1.959 2.435 2.907 3.385 3.857 4.805 5.741 7.583 9.449 11.315 Weight of Tubing Per 100 Ft. (30.5m) Lbs. kg 14.5 26.9 34.4 41.8 64.1 83.9 104.0 136.0 206.0 293.0 400.0 512.0 651.0 967.0 1390.0 2590.0 4030.0 5780.0 (7.7) (10.2) (13.4) (16.6) (18.9) (25.3) (31.6) (37.6) (49.8) (61.8) (73.8) (86.0) (98.0) (122.0) (145.8) (192.6) (240.0) (287.4) Dimensions taken from ASTM B 88-83. 1 cubic ft. of water weighs 62.41 Lbs. 1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) weighs 8.335 Lbs. 1 liter weighs .999 kg. 224 (6.6) (12.2) (15.6) (19.0) (29.1) (38.1) (47.2) (61.7) (93.4) (132.9) (181.4) (232.2) (295.3) (438.6) (630.5) (1174.8) (1828.0) (2621.8) Weight of Tubing Filled With Water Per 100 Ft. (30.5m) Lbs. kg 17.7 32.4 43.9 56.3 83.0 117.6 156.8 210.7 336.6 494.8 687.7 902.0 1157.4 1752.9 2511.9 4547.3 7069.2 10138.0 (8.0) (14.7) (19.9) (25.5) (37.6) (53.3) (71.1) (95.6) (152.7) (224.5) (311.9) (409.2) (525.0) (795.1) (1139.4) (2062.6) (3206.5) (4598.5) Reference Data STANDARD WEIGHT SCHEDULE 40 STEEL PIPE Nominal Pipe Size In. mm (17.1) .675 (21.3) .840 3/4” (26.7) 1.050 (33.4) 1” 1.315 (42.2) 11/4” 1.660 (48.3) 11/2” 1.900 (60.3) 2” 2.375 (73.0) 21/2” 2.875 (88.9) 3” 3.500 (101.9) 31/2” 4.000 (114.3) 4” 4.500 (141.3) 5” 5.563 (168.3) 6” 6.625 (219.1) 8” 8.625 (273.1) 10” 10.750 (323.9) 12” 12.750 (355.6) 14” 14.000 (406.4) 16” 16.000 (457.2) 18” 18.000 (508.0) 20” 20.000 (609.6) 24” 24.000 Dimensions taken from ASTM A 53-82. 1/2” (10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) Nominal Weight Per 100 Ft. (30.5mm) Plain End Lbs. kg Inside Diameter In. mm .493 .622 .824 1.049 1.380 1.610 2.067 2.469 3.068 3.548 4.026 5.047 6.065 7.981 10.020 12.000 13.250 15.250 17.250 19.250 23.250 57.0 85.0 113.0 168.0 227.0 272.0 365.0 579.0 758.0 911.0 1079.0 1462.0 1897.0 2855.0 4048.0 4956.0 5457.0 6258.0 7059.0 7860.0 9462.0 (12.5) (15.8) (20.9) (26.6) (35.1) (40.9) (52.5) (62.7) (77.9) (90.1) (102.3) (128.2) (154.1) (202.7) (254.5) (304.8) (336.6) (387.4) (438.2) (489.0) (590.6) Weight of Pipe Filled With Water Per 100 Ft. (30.5mm) Lbs. kg 65.3 98.2 136.1 205.5 291.8 360.2 510.4 786.5 1078.4 1339.5 1630.7 2329.1 3149.1 5023.2 7465.6 9857.7 11433.1 14174.3 17187.9 20473.7 27862.5 (25.9) (38.6) (51.3) (76.2) (103.0) (123.4) (165.6) (262.6) (343.8) (413.2) (489.4) (663.2) (860.5) (1295.0) (1836.1) (2248.0) (2475.3) (2838.6) (3201.9) (3565.2) (4291.9) Reference Data 3/8” Outside Diameter In. mm (29.6) (44.5) (61.7) (93.2) (132.4) (163.4) (231.5) (356.8) (489.2) (607.6) (739.7) (1056.4) (1428.4) (2278.5) (3386.3) (4471.4) (5185.9) (6429.4) (7796.3) (9286.7) (12638.2) 1 cubic ft. of water weighs 62.41 Lbs. 1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) weighs 8.335 Lbs. 1 liter weighs .999 kg. TRAPEZE HANGERS USING B-LINE STRUT OR ANGLE IRON NOMINAL PIPE SIZES Length of Trapeze Bar 21/2” (65mm) or less 3” (80mm) 31/2” (90mm) 4” (100mm) 5” (125mm) 6” (150mm) 8” (200mm) 10” (250mm) 1’-6” 11/2” x 11/2” x 3/16” 11/2” x 11/2” x 3/16” 11/2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” (0.46m) B24SH B24SH B24SH B22SH B22SH B12SH B11SH B11SH 2’-0” 11/2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” (0.61m) B24SH B22SH B22SH 2’-6” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” B22SH 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” B12SH 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” B12SH B11SH B11SH 3” x 2” x 3/16” 3” x 2” x 1/4” 3” x 2” x 1/4” B11SH B11SH (0.76m) B22SH B22SH B22SH B12SH B12SH B11SH 3’-0” 2” x 11/2” x 3/16” 2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 3/16” B22SH B12SH (0.91m) B22SH 4’-0” 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 31/2” x 21/2” x 1/4” 31/2” x 21/2” x 5/16” B12SH B11SH B11SH B12SHA B12SHA 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 4” x 3” x 5/16” (1.22m) B12SH B12SH B12SH B11SH B11SH B11SH B12SHA B12SHA 5’-0” 21/2” x 11/2” x 3/16” 21/2” x 11/2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 4” x 3” x 5/16” 5” x 31/2” x 5/16” (1.52m) B12SH B12SH B11SH B11SH B11SH B12SHA B12SHA B11SHA 6’-0” 21/2” x 11/2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 4” x 3” x 5/16” 4” x 3” x 5/16” 5” x 31/2” x 5/16” (1.83m) B12SH B11SH B11SH B11SH B12SHA B12SHA B12SHA B11SHA 7’-0” 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 4” x 3” x 5/16” 5” x 31/2” x 5/16” 6” x 4” x 1/4” B11SH B12SHA (2.13m) B11SH B11SH B11SH 8’-0” 3” x 2” x 3/16” 3” x 2” x 1/4” 3” x 2” x 1/4” (2.44m) B11SH B11SH B11SH 9’-0” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16” B12SHA B12SHA 31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16” B12SHA B11SHA 2-B12SHA 4” x 3” x 5/16” 5” x 31/2” x 5/16” 6” x 4” x 1/4” B12SHA B11SHA 2-B12SHA 4” x 3” x 5/16” 5” x 31/2” x 5/16” 6” x 4” x 3/8” (2.74m) B11SH B11SH B12SHA B12SHA B12SHA B12SHA B11SHA 2-B11SHA 10’-0” 3” x 2” x 1/4” 3” x 2” x 1/4” 31/2” x 21/2” x 5/16” 31/2” x 21/2” x 5/16” 4” x 3” x 5/16” 5” x 31/2” x 5/16” 6” x 4” x 1/4” 6” x 4” x 3/8” (3.05m) B11SH B11SH B12SHA B12SHA B12SHA B11SHA 2-B12SHA 2-B11SHA REFERENCE: Table 3-14.1.6 standard for the installation of Sprinkler Systems, NFPA No. 13-1985, published by National Fire Protection Association. 225 Index Index ADI Series AHHK-1/4 AHHK-3/8 APS Series ARC Series 209 215 . . . . . . . . . 215 . . . . . . . . . . 209 . . . . . . . . . 209 B22H25 . . . . . . . . . . . . . . 43 B22-I Series . . . . . . . . . 204 B22-IFS . . . . . . . . . . . . . 208 B22KO6 . . . . . . . . . . . . . 41 B22KO6AL . . . . . . . . . 166 B26H25 . . . . . . . . . . . . . . 43 B26KO6 . . . . . . . . . . . . . 41 B26S . . . . . . . . . . . . . . . . . 40 B26S58 . . . . . . . . . . . . . . 42 B26SH . . . . . . . . . . . . . . . 40 B52S . . . . . . . . . . . . . . . . . 40 B52S58 . . . . . . . . . . . . . . 42 B52SH . . . . . . . . . . . . . . . 40 B54 . . . . . . . . . . . . . . . 34,35 B54A . . . . . . . . . . . . . 34,35 ATR . . . . . . . . . . . . . . . . . . 56 AWA Series . . . . . . . . . 209 B11 . . . . . . . . . . . . . . . 16,17 B11A . . . . . . . . . . . . . . 16,17 B11B . . . . . . . . . . . . . . . . . 17 B22LPL . . . . . . . . . . . . . . 21 B22M . . . . . . . . . . . . . . . . 42 B22PL . . . . . . . . . . . . . . . 21 B22S . . . . . . . . . . . . . . . . . 40 B22S58 . . . . . . . . . . . . . . 42 B32 . . . . . . . . . . . . . . . 28,29 B32A . . . . . . . . . . . . . 28,29 B32B . . . . . . . . . . . . . . . . . 28 B32C . . . . . . . . . . . . . . . . . 28 B32H17/8 . . . . . . . . . . . . . 40 B54AAL . . . . . . . . . . . . 165 B54AL . . . . . . . . . . . . . . 165 B54B3 . . . . . . . . . . . . . . . 34 B54B4 . . . . . . . . . . . . . . . 34 B54H17/8 . . . . . . . . . . . . . 40 B11H17/8 . . . . . . . . . . . . . 40 B11KO6 . . . . . . . . . . . . . 41 B11S . . . . . . . . . . . . . . . . . 40 B11S58 . . . . . . . . . . . . . . 42 B11SH . . . . . . . . . . . . . . . 40 B22SH . . . . . . . . . . . . . . . 40 B22SHA . . . . . . . . . . . . . 41 B22SHAL . . . . . . . . . . . 166 B22SHSS4 . . . . . . . . . . 168 B22SHSS6 . . . . . . . . . . 168 B32H17/8SS4 . . . . . . . 168 B32H25 . . . . . . . . . . . . . . 43 B32-I Series . . . . . . . . . 205 B32-IFS . . . . . . . . . . . . . 208 B32KO6 . . . . . . . . . . . . . 41 B54H17/8AL . . . . . . . . 166 B54H17/8SS4 . . . . . . . 168 B54H17/8SS6 . . . . . . . 168 B54H25 . . . . . . . . . . . . . . 43 B54KO6 . . . . . . . . . . . . . 41 B12 . . . . . . . . . . . . . . . 18,19 B12A . . . . . . . . . . . . . 18,19 B12AL . . . . . . . . . . . . . . 165 B12B . . . . . . . . . . . . . . . . . 18 B12H17/8 . . . . . . . . . . . . . 40 B22SS4 . . . . . . . . . . . . . 168 B22SS6 . . . . . . . . . . . . . 168 B22TH . . . . . . . . . 38,39,41 B22X . . . . . . . . . . . . . 20-23 B24 . . . . . . . . . . . . . . . 24,25 B32M . . . . . . . . . . . . . . . . 42 B32S . . . . . . . . . . . . . . . . . 40 B32S58 . . . . . . . . . . . . . . 42 B32SH . . . . . . . . . . . . . . . 40 B32SHSS4 . . . . . . . . . . 168 B54KO6AL . . . . . . . . . 166 B54M . . . . . . . . . . . . . . . . 42 B54S . . . . . . . . . . . . . . . . . 40 B54S58 . . . . . . . . . . . . . . 42 B54SH . . . . . . . . . . . . . . . 40 B12H17/8AL . . . . . . . . 166 B12KO6 . . . . . . . . . . . . . 41 B12KO6AL . . . . . . . . . 166 B12S . . . . . . . . . . . . . . . . . 40 B12S58 . . . . . . . . . . . . . . 42 B24A . . . . . . . . . . . . . 24,25 B24AL . . . . . . . . . . . . . . 165 B24B . . . . . . . . . . . . . . . . . 24 B24C . . . . . . . . . . . . . . . . . 24 B24H17/8 . . . . . . . . . . . . . 40 B32SS4 . . . . . . . . . . . . . 168 B42 . . . . . . . . . . . . . . . 30,31 B42A . . . . . . . . . . . . . 30,31 B42B . . . . . . . . . . . . . . . . . 30 B42H17/8 . . . . . . . . . . . . . 40 B54SHAL . . . . . . . . . . . 166 B54SHSS4 . . . . . . . . . . 168 B54SHSS6 . . . . . . . . . . 168 B54SS4 . . . . . . . . . . . . . 168 B54SS6 . . . . . . . . . . . . . 168 B12SH . . . . . . . . . . . . . . . 40 B12SHAL . . . . . . . . . . . 166 B22 . . . . . . . . . . . . . . . 20-23 B22A . . . . . . . . . . 20,22,23 B22A3 . . . . . . . . . . . . . . . 21 B24H17/8AL . . . . . . . . 166 B24H17/8SS4 . . . . . . . 168 B24H17/8SS6 . . . . . . . 168 B24H25 . . . . . . . . . . . . . . 43 B24KO6 . . . . . . . . . . . . . 41 B42H17/8SS4 . . . . . . . 168 B42H25 . . . . . . . . . . . . . . 43 B42KO6 . . . . . . . . . . . . . 41 B42M . . . . . . . . . . . . . . . . 42 B42S . . . . . . . . . . . . . . . . . 40 B56 . . . . . . . . . . . . . . . 36,37 B56A . . . . . . . . . . . . . 36,37 B56B3 . . . . . . . . . . . . . . . 36 B56B4 . . . . . . . . . . . . . . . 36 B56H17/8 . . . . . . . . . . . . . 40 B22A4 . . . . . . . . . . . . . . . 21 B22AAL . . . . . . . . . . . . 165 B22AD3 . . . . . . . . . . . . . 21 B22AL . . . . . . . . . . . . . . 165 B22B . . . . . . . . . . . . . . . . . 21 B24KO6AL . . . . . . . . . 166 B24M . . . . . . . . . . . . . . . . 42 B24S . . . . . . . . . . . . . . . . . 40 B24S58 . . . . . . . . . . . . . . 42 B24SH . . . . . . . . . . . . . . . 40 B42S58 . . . . . . . . . . . . . . 42 B42SH . . . . . . . . . . . . . . . 40 B42SHSS4 . . . . . . . . . . 168 B42SS4 . . . . . . . . . . . . . 168 B44M . . . . . . . . . . . . . . . . 42 B56H25 . . . . . . . . . . . . . . 43 B56KO6 . . . . . . . . . . . . . 41 B56S . . . . . . . . . . . . . . . . . 40 B56S58 . . . . . . . . . . . . . . 42 B56SH . . . . . . . . . . . . . . . 40 B22B3 . . . . . . . . . . . . . . . 21 B22C . . . . . . . . . . . . . . . . . 21 B22C3 . . . . . . . . . . . . . . . 21 B22D . . . . . . . . . . . . . . . . 21 B22D3 . . . . . . . . . . . . . . . 21 B24SHAL . . . . . . . . . . . 166 B24SHSS4 . . . . . . . . . . 168 B24SHSS6 . . . . . . . . . . 168 B24SS4 . . . . . . . . . . . . . 168 B24SS6 . . . . . . . . . . . . . 168 B52 . . . . . . . . . . . . . . . 32,33 B52A . . . . . . . . . . . . . 32,33 B52B3 . . . . . . . . . . . . . . . 32 B52B4 . . . . . . . . . . . . . . . 32 B52H17/8 . . . . . . . . . . . . . 40 B62 . . . . . . . . . . . . . . . . . 189 B62A . . . . . . . . . . . . . . . 189 B72 . . . . . . . . . . . . . . . . . 190 B72A . . . . . . . . . . . . . . . 190 B96HP Series . . . . . . . . 43 B22E . . . . . . . . . . . . . . . . . 21 B22E3 . . . . . . . . . . . . . . . 21 B22H17/8 . . . . . . . . . . . . . 40 B22H17/8AL . . . . . . . . 166 B22H17/8SS4 . . . . . . . 168 B26 . . . . . . . . . . . . . . . 26,27 B26A . . . . . . . . . . . . . 26,27 B26B . . . . . . . . . . . . . . . . . 26 B26C . . . . . . . . . . . . . . . . . 26 B26H17/8 . . . . . . . . . . . . . 40 B52H25 . . . . . . . . . . . . . . 43 B52-I Series . . . . . . . . . 206 B52-IFS . . . . . . . . . . . . . 208 B52KO6 . . . . . . . . . . . . . 41 B52M . . . . . . . . . . . . . . . . 42 B101 . . . . . . . . . . . . . . . . . 62 B102 . . . . . . . . . . . . . . . . . 63 B103 . . . . . . . . . . . . . . . . . 63 B104 . . . . . . . . . . . . . . . . . 63 B104SH . . . . . . . . . . . . . . 67 .......... ......... 226 Index B214L . . . . . . . . . . . . . . . . 92 B214R . . . . . . . . . . . . . . . 92 B215S . . . . . . . . . . . . . . 153 B216S . . . . . . . . . . . . . . 153 B217-20 . . . . . . . . . . . . 155 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 B217-24 . . . . . . . . . . . . 155 B217AL . . . . . . . . . . . . 165 B217FFAL . . . . . . . . . . 165 B217P . . . . . . 155,165,187 B218 . . . . . . . . . . . . . . . . 131 69 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 B187 . . . . . . . . . . . . . . . . . 85 B188 . . . . . . . . . . . . . . . . . 85 B189 . . . . . . . . . . . . . . . . . 85 B190 . . . . . . . . . . . . . . . . . 85 B191-18 . . . . . . . . . . . . . . 85 B219 Series . . . . . 132,133 B220 . . . . . . . . 96,155,208 B221 . . . . . . . . . . . . . 96,155 B222 . . . . . . . . . . . . . 96,155 B223 . . . . . . . . . . . . . 96,155 B116-12 . . . . . . . . . . . . . . 73 B116-32 . . . . . . . . . . . . . . 73 B116-32A . . . . . . . . . . . . 73 B116-42 . . . . . . . . . . . . . . 73 B116-52 . . . . . . . . . . . . . . 73 B164 . . . . . . . . . . . . . . . . . 68 B165 . . . . . . . . . . . . . . . . . 68 B166 Series . . . . . . . . . 159 B166-46 Series . . . . . . 159 B166CL . . . . . . . . . . . . . 159 B191-24 . . . . . . . . . . . . . . 86 B192 . . . . . . . . . . . . . . . . . 86 B194 . . . . . . . . . . . . . . . . . 88 B195 . . . . . . . . . . . . . . . . . 89 B196-18 . . . . . . . . . . . . . . 88 B230 . . . . . . . . . . . . . . . . . 62 B231 . . . . . . . . . . . . . . . . . 62 B232 . . . . . . . . . . . . . . . . . 63 B234L . . . . . . . . . . . . . . . . 65 B234R . . . . . . . . . . . . . . . 65 B118 B119 B120 B121 B122 ................. 65 80 . . . . . . . . . . . . . . . . . 81 . . . . . . . . . . . . . . . . . 81 . . . . . . . . . . . . . . . . . 81 B167 B168 B169 B170 B171 72 72 . . . . . . . . . . . . . . . . . 72 . . . . . . . . . . . . . . . . . 72 . . . . . . . . . . . . . . . . . 72 B196-24 . . . . . . . . . . . . . . 88 B198-6 . . . . . . . . . . . . . . . 88 B198-12 . . . . . . . . . . . . . . 88 B198A-6 . . . . . . . . . . . . . 88 B198A-12 . . . . . . . . . . . . 88 B235L . . . . . . . . . . . . . . . . 64 B235R . . . . . . . . . . . . . . . 64 B236L . . . . . . . . . . . . . . . . 64 B236R . . . . . . . . . . . . . . . 64 B237 . . . . . . . . . . . . . . . . . 64 B123 B124 B125 B126 B127 ................. 81 . . . . . . . . . . . . . . . . . 81 . . . . . . . . . . . . . . . . . 65 . . . . . . . . . . . . . . . . . 66 . . . . . . . . . . . . . . . . . 66 B172 . . . . . . . . . . . . . . . . . 72 B172-12 . . . . . . . . . . . . . . 72 B172-22A . . . . . . . . . . . . 72 B173 . . . . . . . . . . . . . . . . . 75 B174SHL . . . . . . . . . . . . 87 B200 . . . . . . . . . . . . . . . . . 59 B200D . . . . . . . . . . . . . . . 59 B201 . . . . . . . . . . . . . . . . . 59 B201D . . . . . . . . . . . . . . . 59 B202 . . . . . . . . . . . . . . . . . 59 B238L . . . . . . . . . . . . . . . . 64 B238R . . . . . . . . . . . . . . . 64 B239 . . . . . . . . . . . . . . . . . 64 B241S . . . . . . . . . . . . . . 153 B243 . . . . . . . . . . . . . . . . . 68 B129 . . . . . . . . . . . . . . . . . 59 B132 . . . . . . . . . . . . . . . . . 60 B133 . . . . . . . . . . . . . . . . . 60 B134L . . . . . . . . . . . . . . . . 65 B134R . . . . . . . . . . . . . . . 65 B174SHR B175SHL B175SHR B176SHL B176SHR ............ 87 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 B202-1 . . . . . . . . . . . . . . . 59 B202-1D . . . . . . . . . . . . . 59 B202-2 . . . . . . . . . . . . . . . 59 B202-2D . . . . . . . . . . . . . 59 B202D . . . . . . . . . . . . . . . 59 B244 B245 B246 B247 B248 ................. B135 B136 B137 B138 B139 ................. 60 61 . . . . . . . . . . . . . . . . . 61 . . . . . . . . . . . . . . . . . 60 . . . . . . . . . . . . . . . . . 60 B177SHL B177SHR B178SHL B178SHR B179SHL ............ 87 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 B203 B204 B205 B206 B210 B249 B250 B251 B252 B253 ................. B140 B141 B142 B143 B147 ................. 60 59 . . . . . . . . . . . . . . . . . 60 . . . . . . . . . . . . . . . . . 60 . . . . . . . . . . . . . . . . . 68 B179SHR B180SHL B180SHR B181SHL B181SHR ............ 87 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 B210A . . . . . . . . . . . . . . 101 B211 . . . . . . . . . . . . . . . . 106 B212-1/4 . . . . . . . . . . . . 106 B212-3/8 . . . . . . . . . . . . 106 B213 . . . . . . . . . . . . . . . . 106 B148 B149 B150 B151 B152 ................. B107 . . . . . . . . . . . . . . . . . 73 B107-22A . . . . . . . . . . . . 73 B107S . . . . . . . . . . . 74,109 B108 . . . . . . . . . . . . . . . . . 77 B109S . . . . . . . . . . . . . . . . 67 B154 B155 B156 B157 B158 B110 B111 B112 B113 B115 B159 B160 B161 B162 B163 ................. 77 78 . . . . . . . . . . . . . . . . . 67 . . . . . . . . . . . . . . . . . 67 . . . . . . . . . . . . . . . . . 63 ................. ................. ................. ................. ................. 68 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 B182SHL B182SHR B183SHL B183SHR B184SHL ............ ................. 68 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 B184SHR B185SHL B185SHR B186SHL B186SHR ............ ................. ................. ................. ................. ............ ............ ............ 227 ............ 96,155 96,155 . . . . . . . . 96,155,208 . . . . . . . . 96,155,208 . . . . . . . . . . . . . . . . 101 ............. ............. 68 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 ................. 68 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 ................. B261 Series . . . . . . . . . . 71 B266 . . . . . . . . . . . . . . . . . 74 B267L . . . . . . . . . . . . . . . . 80 B267R . . . . . . . . . . . . . . . 80 B268L . . . . . . . . . . . . . . . . 80 Index 87 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 . . . . . . . . . . . . 87 B105 . . . . . . . . . . . . . . . . . 77 B106-12 . . . . . . . . . . . . . . 77 B106-32 . . . . . . . . . . . . . . 77 B106-42 . . . . . . . . . . . . . . 77 B106-52 . . . . . . . . . . . . . . 77 Index 101 101 . . . . . . . . . . . . . . . . 101 . . . . . . . . . . . . . . . . 101 . . . . . . . . . . . . . . . . 101 B361 B362 B363 B364 B365 ................. 63 82 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 B410-12 . . . . . . . . . . . . . . 79 B410-22 . . . . . . . . . . . . . . 79 B410-32 . . . . . . . . . . . . . . 79 B410-52 . . . . . . . . . . . . . . 79 B411 Series . . . . . . . . . . 93 B271 . . . . . . . . . . . . . . . . . 81 B272 . . . . . . . . . . . . . . . . . 81 B273 . . . . . . . . . . . . . . . . . 81 B274L . . . . . . . . . . . . . . . . 82 B274R . . . . . . . . . . . . . . . 82 B312 Series . . . . . . . . . 101 B314 . . . . . . . . . . . . . . . . 105 B318 . . . . . . . . . . . . . . . . 107 B319 . . . . . . . . . . . . . . . . 107 B320 . . . . . . . . . . . . . . . . 107 B366 B367 B368 B369 B370 ................. 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . . 89 B412 . . . . . . . . . . . . . . . . . 74 B415 . . . . . . . . . . . . . . . . . 76 B420-378 . . . . . . . . . . . . 62 B420-578 . . . . . . . . . . . . 62 B420-778 . . . . . . . . . . . . 62 B276 . . . . . . . . . . . . . . . . . 81 B277 . . . . . . . . . . . . . . . . . 82 B278 . . . . . . . . . . . . . . . . . 84 B279 . . . . . . . . . . . . . . . . . 83 B279FL . . . . . . . . . . . . . . 83 B321 Series . . . . . . . . . 101 B322 . . . . . . . . . . . . . . . . . 68 B323 . . . . . . . . . . . . . . . . . 68 B324 . . . . . . . . . . . . . . . . . 68 B325 . . . . . . . . . . . . . . . . . 68 B371 . . . . . . . . . . . . . . . . . 66 B371-2 . . . . . . . . . . . . . . . 67 B372 . . . . . . . . . . . . . . . . . 66 B374 . . . . . . . . . . . . . . . . . 63 B376 . . . . . . . . . . . . . . . . . 95 B420-978 . . . . . . . . . . . . 62 B422 Series . . . . . 109,124 B425 . . . . . . . . . . . . . . . . . 74 B427 . . . . . . . . . . . . . . . . 107 B428 . . . . . . . . . . . . . . . . . 79 B279SQ . . . . . . . . . . . . . . 83 B280 . . . . . . . . . . . . . . . . . 83 B280FL . . . . . . . . . . . . . . 83 B280SQ . . . . . . . . . . . . . . 83 B281 . . . . . . . . . . . . . . . . . 84 B326 B327 B328 B329 B330 68 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . 68 B377 . . . . . . . . . . . . . . . . . 95 B379 . . . . . . . . . . . . . . . . 134 B380 Series . . . . . . . . . 208 B381 . . . . . . . . . . . . . . . . . 93 B382 . . . . . . . . . . . . . . . . . 93 B432 . . . . . . . . . . . . . . . . . 61 B435 . . . . . . . . . . . . . . . . 106 B436 . . . . . . . . . . . . . . . . 154 B436S . . . . . . . . . . . . . . 154 B437 Series . . . . . . . . . 123 B281A . . . . . . . . . . . . . . . 83 B281AFL . . . . . . . . . . . . 83 B281ASQ . . . . . . . . . . . . 83 B281FL . . . . . . . . . . . . . . 84 B281M . . . . . . . . . . . . . . . 84 B331 . . . . . . . . . . . . . . . . . 68 B332 . . . . . . . . . . . . . . . . . 68 B333-1 . . . . . . . . . . . . . . . 75 B333-2 . . . . . . . . . . . . . . . 75 B333-3 . . . . . . . . . . . . . . . 75 B383 . . . . . . . . . . . . . . . . . 93 B384 . . . . . . . . . . . . . . . . . 93 B385 . . . . . . . . . . . . . . . . . 93 B386 Series . . . . . . . . . 128 B387 Series . . . . . . . . . . 78 B438 . . . . . . . . . . . . . . . . . 93 B439 . . . . . . . . . . . . . . . . . 93 B440 . . . . . . . . . . . . . . . . . 89 B441-22 Series . . . . . . 105 B441-22A Series . . . . 105 B281MSQ . . . . . . . . . . . . 84 B281SQ . . . . . . . . . . . . . . 84 B283 . . . . . . . . . . . . . 96,155 B284 . . . . . . . . . . . . . 96,155 B285 . . . . . . . . . . . . . 96,155 B334 . . . . . . . . . . . . . . . . . 61 B335 . . . . . . . . . . . . . . . . . 69 B335-1 . . . . . . . . . . . . . . . 69 B335-2 Series . . . . . . . . 69 B337 . . . . . . . . . . . . . . . . . 61 B390BX . . . . . . . . . . . . 154 B390S . . . . . . . . . . . . . . 154 B392-11 Series . . . . . . 156 B392-12 Series . . . . . . 156 B392-22 Series . . . . . . 156 B441Z-22 . . . . . . . . . . . 105 B441Z-22A . . . . . . . . . 105 B444 Series . . . . . . . . . 100 B446 Series . . . . . . 54,160 B446A Series . . . . 54,160 B286 . . . . . . . . . . . . . 96,155 B287 . . . . . . . . . . . . . . . . . 96 B288 . . . . . . . . . . . . . . . . . 96 B289-12 . . . . . . . . . . . . . . 86 B289-14 . . . . . . . . . . . . . . 86 B339 . . . . . . . . . . . . . . . . . 61 B340 . . . . . . . . . . . . . . . . . 59 B341 . . . . . . . . . . . . . . . . . 59 B342 . . . . . . . . . . . . . . . . . 59 B346L . . . . . . . . . . . . . . . . 82 B392-32 Series . . . . . . 156 B393-1 . . . . . . . . . . . . . . 159 B394 Series . . . . . . . . . 128 B398-1 . . . . . . . . . . . . . . . 76 B400 . . . . . . . . . . . . . . . . . 76 B446B Series . . . . 54,160 B446C Series . . . . 54,160 B447 . . . . . . . . . . . . . . . . 156 B447A . . . . . . . . . . . . . . 156 B449-4 . . . . . . . . . . . . . . . 89 B290 . . . . . . . . . . . . . . . . . 86 B291 . . . . . . . . . . . . . . . . . 86 B292 . . . . . . . . . . . . . . . . . 87 B293 Series . . . . . . . . . . 88 B293A Series . . . . . . . . . 88 B346R . . . . . . . . . . . . . . . 82 B349 . . . . . . . . . . . . . . . . . 94 B350 . . . . . . . . . . . . . . . . . 94 B351L Series . . . . . . . . . 99 B355 . . . . . . . . . . . . . . . . 106 B400-1 . . . . . . . . . . . . . . . 76 B400-2 . . . . . . . . . . . . . . . 76 B400-3 . . . . . . . . . . . . . . . 76 B400-4 . . . . . . . . . . . . . . . 76 B405 . . . . . . . . . . . . . 75,107 B449-8 . . . . . . . . . . . . . . . 89 B449-12 . . . . . . . . . . . . . . 89 B449-18 . . . . . . . . . . . . . . 89 B450 Series . . . . . . . . . . 72 B451-1 . . . . . . . . . . . . . . . 75 B293PL . . . . . . . . . . . . . . 89 B297 Series . . . . . . . . . . 87 B300 . . . . . . . . . . . . . . . . . 84 B303 . . . . . . . . . . . . . . . . 101 B304 . . . . . . . . . . . . . . . . 101 B356 . . . . . . . . . . . . . . . . 130 B357 . . . . . . . . . . . . . . . . . 64 B358 Series . . . . . . . . . . 75 B359 . . . . . . . . . . . . . . . . . 62 B360 . . . . . . . . . . . . . . . . . 62 B405A . . . . . . . . . . . . . . 107 B407 Series . . . . . . . . . . 78 B408 Series . . . . . . . . . . 75 B409 Series . . . . . . . . . . 87 B410-11 . . . . . . . . . . . . . . 79 B451-2 . . . . . . . . . . . . . . . 75 B451-3 . . . . . . . . . . . . . . . 75 B460 Series . . . . . . . . . 154 B461 . . . . . . . . . . . . . . . . . 67 B464 Series . . . . . . . . . 154 Index B268R B269L B269R B270L B270R 80 80 . . . . . . . . . . . . . . . 80 . . . . . . . . . . . . . . . . 80 . . . . . . . . . . . . . . . 80 ............... ................ B305 B306 B307 B308 B309 ................ ................ ................. ................. 228 ................. Index B633 Series . . . . . . . . . . 70 B634 . . . . . . . . . . . . . . . . . 70 B635 . . . . . . . . . . . . . . . . . 70 B650 Series . . . . . . . . . . 70 B655 Series . . . . . . . . . . 56 B825-52 . . . . . . . . . . . . . . 97 B844 . . . . . . . . . . . . . . . . . 65 B844W . . . . . . . . . . . . . . . 65 B852 . . . . . . . . . . . . . . . . . 96 B852S Series . . . . . . . . . 90 63 . . . . . . . . . . . . . . . . . 94 . . . . . . . . . . . . . . . . . 94 . . . . . . . . . . . . . . . . . 61 . . . . . . . . . . . . . . . . . 84 B656 Series . . . . . . . . . . 56 B663 . . . . . . . . . . . . . . . . . 66 B664 . . . . . . . . . . . . . . . . . 93 B670 Series . . . . . . . . . 124 B671 Series . . . . . . . . . 124 B888W . . . . . . . . . . . . . . . 65 B1508 . . . . . . . . . . . . . . . 116 B1508S . . . . . . . . . . . . . 116 B1512 . . . . . . . . . . . . . . . 116 B1512S . . . . . . . . . . . . . 116 B477P . . . . . . . . . . . . . . . . 95 B478 . . . . . . . . . . . . . . . . . 95 B478H . . . . . . . . . . . . . . . 95 B478HP . . . . . . . . . . . . . . 95 B478P . . . . . . . . . . . . . . . . 95 B570A . . . . . . . . . . . . . . . 84 B571 . . . . . . . . . . . . . . . . . 82 B578 . . . . . . . . . . . . . . . . . 74 B580 . . . . . . . . . . . . . . . . . 79 B581 . . . . . . . . . . . . . . . . . 74 B700 Series . . . . . . . . . 104 B701 Series . . . . . . . . . 102 B702 . . . . . . . . . . . . . . . . 103 B705 Series . . . . . . . . . 103 B718 Series . . . . . . . . . 157 B1516 . . . . . . . . . . . . . . . 116 B1516S . . . . . . . . . . . . . 116 B1520 . . . . . . . . . . . . . . . 116 B1520S . . . . . . . . . . . . . 116 B1524S . . . . . . . . . . . . . 116 B479 . . . . . . . . . . . . . . . . 135 B485 . . . . . . . . . . . . . . . . . 66 B488 . . . . . . . . . . . . . . . . . 68 B494 Series . . . . . . . . . . 87 B495 . . . . . . . . . . . . . . . . . 82 B585 . . . . . . . . . . . . . . . . . 84 B586 . . . . . . . . . . . . . . . . . 77 B587 Series . . . . . . . . . . 93 B588 . . . . . . . . . . . . . . . . . 73 B589 . . . . . . . . . . . . . . . . 159 B719AL . . . . . . . . . . . . 157 B750 Series . . . . . . . . . 104 B751 . . . . . . . . . . . . . . . . 102 B751-J Series . . . . . . . 102 B752 . . . . . . . . . . . . . . . . 102 B1532S B1534S B1540S B1548S B1556S B496 . . . . . . . . . . . . . . . . . 67 B496-1 . . . . . . . . . . . . . . . 67 B500 Series . . . . . . 52,104 B501 Series . . . . . . . . . . 52 B503L . . . . . . . . . . . . . . . . 66 B589-62 . . . . . . . . . . . . 195 B590 . . . . . . . . . . . . . . . . 160 B591 Series . . . . . . . . . 129 B593 . . . . . . . . . . . . . . . . 109 B594 . . . . . . . . . . . . . . . . . 74 B753 Series . . . . . . . . . 102 B755 . . . . . . . . . . . . . . . . 103 B755-3/8-J Series . . . . 103 B756-3/8 . . . . . . . . . . . . 103 B760-22 Series . . . . . . 108 B1564S . . . . . . . . . . . . . 116 B1999 . . . . . . . . . . . . . . 121 B2000 . . . . . . . . . . . . . . . 112 B2001 . . . . . . . . . . . . . . . 112 B2002 . . . . . . . . . . . . . . . 112 B503R . . . . . . . . . . . . . . . 66 B504 . . . . . . . . . . . . . . . . . 60 B514L . . . . . . . . . . . . . . . . 92 B514R . . . . . . . . . . . . . . . 92 B515 . . . . . . . . . . . . . . . . . 79 B595 . . . . . . . . . . . . . . . . . 75 B596 . . . . . . . . . . . . . . . . . 74 B598-62 . . . . . . . . . . . . 198 B600-62 . . . . . . . . . . . . 192 B601-62 . . . . . . . . . . . . 196 B760-22A Series . . . . 108 B761-22 Series . . . . . . 108 B761-22A Series . . . . 108 B766 Series . . . . . . . . . 158 B767 Series . . . . . . . . . 158 B2003 . . . . . . . . . . . . . . . 112 B2004 . . . . . . . . . . 112,114 B2005 . . . . . . . . . . 112,114 B2006 . . . . . . . . . . . . . . . 112 B2007AL . . . . . . . . . . . 166 B516 . . . . . . . . . . . . . . . . 155 B516S . . . . . . . . . . . . . . 155 B518 Series . . . . . . . . . 157 B519 . . . . . . . . . . . . . . . . . 74 B521 . . . . . . . . . . . . . . . . . 67 B602-A . . . . . . . . . . . . . 107 B602-B . . . . . . . . . . . . . 107 B602-C . . . . . . . . . . . . . 107 B613 . . . . . . . . . . . . . 94,109 B613A . . . . . . . . . . . 94,109 B768 Series . . . . . . . . . 158 B769 Series . . . . . . . . . 158 B802D Series . . . . . . . . 90 B809B Series . . . . . . . . . 91 B810 Series . . . . . . . . . . 90 B2007SS4 . . . . . . . . . . 169 B2008 . . . . . . . . . . . . . . . 112 B2008AL . . . . . . . . . . . 166 B2008DCU . . . . . . . . . 113 B2008SS4 . . . . . . . . . . 169 B522 B526 B527 B528 B529 ................. 68 77 . . . . . . . . . . . . . . . . . 73 . . . . . . . . . . . . . . . . . 59 . . . . . . . . . . . . . . . . . 63 B614 . . . . . . . . . . . . . 94,109 B616 Series . . . . . . . . . 152 B616-22A Series . . . . 152 B616S Series . . . . . . . . 152 B616S-22A Series . . . 153 B811 Series . . . . . . . . . . 91 B812 Series . . . . . . . . . . 91 B816 . . . . . . . . . . . . . . . . . 90 B822 . . . . . . . . . . . . . . . . . 96 B822A . . . . . . . . . . . . . . . 96 B2009 . . . . . . . . . . . . . . . 112 B2009AL . . . . . . . . . . . 166 B2009SS4 . . . . . . . . . . 169 B2010 . . . . . . . . . . . . . . . 112 B2010AL . . . . . . . . . . . 166 B532 B533 B534 B535 B536 ................. 61 66 . . . . . . . . . . . . . . . . . 78 . . . . . . . . . . . . . . . . . 78 . . . . . . . . . . . . . . . . . 76 B616TG-9/16 . . . . . . . . 153 B617 . . . . . . . . . . . . . 54,160 B619 . . . . . . . . . . . . . . . . 159 B631 Series . . . . . . . . . . 71 B632 Series . . . . . . . . . . 71 B823-22 . . . . . . . . . . . . . . 97 B823-22A . . . . . . . . . . . . 97 B823-42 . . . . . . . . . . . . . . 97 B823-52 . . . . . . . . . . . . . . 97 B825-22 . . . . . . . . . . . . . . 97 B2010SS4 . . . . . . . . . . 169 B2011 . . . . . . . . . . 112,114 B2011AL . . . . . . . . . . . 166 B2011DCU . . . . . . . . . 113 B2011SS4 . . . . . . . . . . . 169 B538 B539 B541 B556 B557 ................. B474 . . . . . . . . . . . . . . . . . 92 B475 . . . . . . . . . . . . . . . . . 92 B477 . . . . . . . . . . . . . . . . . 95 B477H . . . . . . . . . . . . . . . 95 B477HP . . . . . . . . . . . . . . 95 B558 B560 B562 B568 B570 ................. ................. ................. ................. 229 116 116 . . . . . . . . . . . . . 116 . . . . . . . . . . . . . 116 . . . . . . . . . . . . . 116 ............. ............. Index 78 78 . . . . . . . . . . . . . . . . . 85 . . . . . . . . . . . . . . . . . 61 . . . . . . . . . . . . . . . . . 59 B465 . . . . . . . . . . . . . . . . 154 B466S . . . . . . . . . . . . . . 159 B466W . . . . . . . . . . . . . 159 B472 . . . . . . . . . . . . . . . . . 92 B473 . . . . . . . . . . . . . . . . . 92 Index Index B2036 . . . . . . . . . . . . . . . 114 B2037 . . . . . . . . . . . . . . . 114 B2038 . . . . . . . . . . . . . . . 114 B2038DCU . . . . . . . . . 113 B2039 . . . . . . . . . . . . . . . 114 B2085 B2086 B2087 B2088 B2089 B2013SS4 . . . . . . . . . . 169 B2014 . . . . . . . . . . 112,114 B2014AL . . . . . . . . . . . 166 B2014SS4 . . . . . . . . . . 169 B2015 . . . . . . . . . . 112,114 B2041 . . . . . . . . . . . . . . . 114 B2042 . . . . . . . . . . . . . . . 114 B2042DCU . . . . . . . . . 113 B2043 . . . . . . . . . . . . . . . 114 B2045 . . . . . . . . . . . . . . . 114 B2090 . . . . . . . . . . . . . . 125 B2091 . . . . . . . . . . . . . . 125 B2110 . . . . . . . . . . . . . . . 115 B2110DCU . . . . . . . . . 113 B2111 . . . . . . . . . . . . . . . 115 B2354 . . . . . . . . . . . . . . 169 B2355 . . . . . . . . . . . . . . 169 B2400 Series . . . . . . . . 122 B2417 Series . . . . . . . . 123 B2500 . . . . . . . . . . . . . . 207 B2015AL . . . . . . . . . . . 166 B2015SS4 . . . . . . . . . . 169 B2016 . . . . . . . . . . 112,114 B2016AL . . . . . . . . . . . 166 B2016SS4 . . . . . . . . . . 169 B2046 . . . . . . . . . . . . . . . 114 B2046DCU . . . . . . . . . 113 B2047 . . . . . . . . . . . . . . . 114 B2048 . . . . . . . . . . . . . . . 114 B2050 . . . . . . . . . . . . . . . 114 B2112 B2113 B2115 B2116 B2117 ............... 115 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . 115 B2501 Series . . . . . . . . 207 B2503 . . . . . . . . . . . . . . 207 B2505 . . . . . . . . . . . . . . 207 B2506 . . . . . . . . . . . . . . 207 B2507 . . . . . . . . . . . . . . 207 B2017 . . . . . . . . . . 112,114 B2017AL . . . . . . . . . . . 166 B2017SS4 . . . . . . . . . . 169 B2018 . . . . . . . . . . 112,115 B2018AL . . . . . . . . . . . 166 B2050DCU . . . . . . . . . 113 B2051 . . . . . . . . . . . . . . . 114 B2052 . . . . . . . . . . . . . . . 114 B2054 . . . . . . . . . . . . . . . 114 B2054DCU . . . . . . . . . 113 B2118 B2119 B2120 B2121 B2123 ............... 115 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . 115 B2508 B2601 B2602 B2603 B2608 B2018SS4 . . . . . . . . . . 169 B2019 . . . . . . . . . . 112,115 B2019AL . . . . . . . . . . . 166 B2019SS4 . . . . . . . . . . 169 B2020 . . . . . . . . . . 112,115 B2055 B2056 B2058 B2059 B2060 B2124 . . . . . . . . . . . . . . . 115 B2125 . . . . . . . . . . . . . . . 115 B2126 . . . . . . . . . . . . . . . 115 B2126DCU . . . . . . . . . 113 B2127 . . . . . . . . . . . . . . . 115 B2609 . . . . . . . . . . . . . . . 117 B2610 . . . . . . . . . . . . . . . 117 B3033 Series . . . . . . . . 100 B3034 Series . . . . . . . . 100 B3036L Series . . . . . . . . 99 B2020AL . . . . . . . . . . . 166 B2020SS4 . . . . . . . . . . 169 B2021 . . . . . . . . . . 112,115 B2022 . . . . . . . . . . 112,115 B2023 . . . . . . . . . . . . . . . 114 B2062 . . . . . . . . . . . . . . . 115 B2062DCU . . . . . . . . . 113 B2063 . . . . . . . . . . . . . . . 115 B2064 . . . . . . . . . . . . . . . 115 B2066 . . . . . . . . . . . . . . . 115 B2128 B2129 B2130 B2132 B2207 ............... 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . 112,115 . . . . . . . . . . 112,115 . . . . . . . . . . . . . . . 111 B3037 B3322 B3332 B3342 B3352 B2024 . . . . . . . . . . . . . . . 114 B2024DCU . . . . . . . . . 113 B2025 . . . . . . . . . . . . . . . 114 B2025DCU . . . . . . . . . 113 B2026 . . . . . . . . . . . . . . . 114 B2067 B2068 B2069 B2070 B2071 ............... B2208 B2209 B2210 B2211 B2212 ............... 111 111 . . . . . . . . . . . . . . . 111 . . . . . . . . . . . . . . . 111 . . . . . . . . . . . . . . . 111 B3362 Series B3363 Series B3364 Series B3365 Series B3367 Series B2026DCU . . . . . . . . . 113 B2027 . . . . . . . . . . . . . . . 114 B2027DCU . . . . . . . . . 113 B2028 . . . . . . . . . . . . . . . 114 B2029 . . . . . . . . . . . . . . . 114 B2072 B2073 B2074 B2075 B2076 .............. B2030 . . . . . . . . . . . . . . . 114 B2030DCU . . . . . . . . . 113 B2031 . . . . . . . . . . . . . . . 114 B2032 . . . . . . . . . . . . . . . 114 B2032DCU . . . . . . . . . 113 B2077 B2078 B2079 B2080 B2084 .............. 114 114 . . . . . . . . . . . . . . . 114 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . . 115 ............... ............... 115 115 . . . . . . . . . . . . . . . 115 . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . 123 ............... 125 125 . . . . . . . . . . . . . . 125 . . . . . . . . . . . . . . 125 . . . . . . . . . . . . . . 125 B2315 B2350 B2351 B2352 B2353 B2012 . . . . . . . . . . . . . . . 112 B2012AL . . . . . . . . . . . 166 B2012SS4 . . . . . . . . . . 169 B2013 . . . . . . . . . . 112,114 B2013AL . . . . . . . . . . . 166 .............. .............. ............... ............... ............... 169 169 . . . . . . . . . . . . . . 169 . . . . . . . . . . . . . . 169 . . . . . . . . . . . . . . 169 .............. .............. 207 117 . . . . . . . . . . . . . . . 117 . . . . . . . . . . . . . . . 117 . . . . . . . . . . . . . . . 117 .............. ............... 99 . . . . . . . . . . . 96,208 . . . . . . . . . . . 96,208 . . . . . . . . . . . 96,208 . . . . . . . . . . . 96,208 ................ 99 99 . . . . . . . . . 99 . . . . . . . . . 99 . . . . . . . . 100 ......... ......... 123 123 . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . 123 B2213 . . . . . . . . . . . . . . . 111 B2301 Series . . . . . . . . 125 B2302 Series . . . . . . . . 125 B2308 . . . . . . . . . . . . . . 199 B2309 . . . . . . . . . . . . . . 199 B3367S-1 Series . . . . 124 B3367S-2 Series . . . . 124 B3373 Series . . . . . . . . 126 B3690 Series . . . . . . . . 127 B3690F Series . . . . . . 127 123 123 . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . 123 . . . . . . . . . . . . . . 125 B2310 B2311 B2312 B2313 B2314 B4000 B4001 B4002 B4003 B4004 .............. .............. 230 199 199 . . . . . . . . . . . . . . 199 . . . . . . . . . . . . . . 169 . . . . . . . . . . . . . . 169 .............. ............... 163 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 .............. .............. Index B4005 B4006 B4007 B4008 B4009 B4074 B4075 B4076 B4077 B4078 .............. 161 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6141 . . . . . . . . . . . . . . 192 B6142 . . . . . . . . . . . . . . 193 B6143 . . . . . . . . . . . . . . 192 B6144L . . . . . . . . . . . . . 194 B6144R . . . . . . . . . . . . . 194 B6526 B6532 B6533 B6557 B6558 163 . . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 B4079 B4080 B4081 B4082 B4083 .............. 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6147 B6148 B6149 B6150 B6151 .............. 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 B6571 B6594 B7105 B7116 B7205 B4015 . . . . . . . . . . . . . . 163 B4016 . . . . . . . . . . . . . . 163 B4017 . . . . . . . . . . . . . . 163 B4033A . . . . . . . . . . . . . 163 B4033B . . . . . . . . . . . . . 163 B4084 B4085 B4086 B4087 B4088 .............. 161 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6152 B6154 B6155 B6156 B6157 .............. 196 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 BC442 . . . . . . . . . . . . . . 100 BD40 . . . . . . . . . . . . . . . 208 BE-5-8 . . . . . . . . . . . . . .208 BE-9-12 . . . . . . . . . . . . . 208 BFN-10 . . . . . . . . . . . . . . 48 163 163 . . . . . . . . . . . . . 163 . . . . . . . . . . . . . 163 . . . . . . . . . . . . . 163 B4089 B4090 B4091 B4092 B4093 .............. 161 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6158 B6159 B6160 B6161 B6162 .............. 196 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 196 BFN-6 . . . . . . . . . . . . . . . 48 BFN-8 . . . . . . . . . . . . . . . 48 BFP22 . . . . . . . . . . 172,173 BFP22A . . . . . . . . 172,173 BFP22H17/8 . . . . . . . . . 172 B4033H . . . . . . . . . . . . . 163 B4033I . . . . . . . . . . . . . . 163 B4035A . . . . . . . . . . . . . 162 B4035B . . . . . . . . . . . . . 162 B4035C . . . . . . . . . . . . . 162 B4094 B4095 B6101 B6102 B6103 .............. 162 162 . . . . . . . . . . . . . . 193 . . . . . . . . . . . . . . 194 . . . . . . . . . . . . . . 194 B6163 B6164 B6165 B6167 B6168 .............. 196 196 . . . . . . . . . . . . . . 196 . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 197 BFP22I . . . . . . . . . . . . . 176 BFP22SH . . . . . . . . . . . 172 BFP42 . . . . . . . . . . 174,175 BFP42A . . . . . . . . 174,175 BFP42H17/8 . . . . . . . . . 174 B4035D . . . . . . . . . . . . . 162 B4035E . . . . . . . . . . . . . 162 B4035F . . . . . . . . . . . . . 162 B4037B . . . . . . . . . . . . . 162 B4050 . . . . . . . . . . . . . . 162 B6104 . . . . . . . . . . . . . . 194 B6105 . . . . . . . . . . . . . . 198 B6107 . . . . . . . . . . . . . . 197 B6107-62A . . . . . . . . . 197 B6108 . . . . . . . . . . . . . . 198 B6169 B6170 B6171 B6172 B6173 .............. 196 . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 198 BFP42SH . . . . . . . . . . . 174 BFP409 Series . . . . . . 182 BFP494 Series . . . . . . 182 BFP2400-2 . . . . . . . . . . 180 BFP2400-3 . . . . . . . . . . 180 B4051 B4060 B4061 B4062 B4063 .............. 162 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6110 B6112 B6118 B6126 B6127 B6202 B6205 B6211 B6230 B6232 191 199 . . . . . . . . . . . . . . . 199 . . . . . . . . . . . . . . 193 . . . . . . . . . . . . . . 194 BFP2400-4 . . . . . . . . . . 180 BFP2400-6 . . . . . . . . . . 180 BFP3104-8 . . . . . . . . . . 181 BFP3104-10 . . . . . . . . 181 BFP3104-12 . . . . . . . . 181 B4064 B4065 B4066 B4067 B4068 .............. 161 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6129 . . . . . . . . . . . . . . 191 B6132 . . . . . . . . . . . . . . 193 B6133 . . . . . . . . . . . . . . 193 B6134L . . . . . . . . . . . . . 195 B6134R . . . . . . . . . . . . . 195 B6234L . . . . . . . . . . . . . 195 B6234R . . . . . . . . . . . . . 195 B6239 . . . . . . . . . . . . . . 194 B6337 . . . . . . . . . . . . . . 193 B6340 . . . . . . . . . . . . . . 191 BFV22 . . . . . . . . . 172,173 BFV22A . . . . . . . . 172,173 BFV22H17/8 . . . . . . . . 172 BFV22I . . . . . . . . . . . . . 176 BFV22SH . . . . . . . . . . . 172 B4069 B4070 B4071 B4072 B4073 .............. 161 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . 161 B6135 B6136 B6138 B6139 B6140 B6341 . . . . . . . . . . . . . . 192 B6357 . . . . . . . . . . . . . . 194 B6374 . . . . . . . . . . . . . . 194 B6409 Series . . . . . . . . 199 B6504 . . . . . . . . . . . . . . 192 BFV42 . . . . . . . . . 174,175 BFV42A . . . . . . . . 174,175 BFV42H17/8 . . . . . . . . 174 BFV42SH . . . . . . . . . . . 174 BFV100 . . . . . . . . . . . . . 179 B4010 B4011 B4012 B4013 B4014 .............. B4033C B4033D B4033E B4033F B4033G .............. ............. ............. .............. .............. .............. .............. .............. .............. .............. 198 195 . . . . . . . . . . . . . . . 195 . . . . . . . . . . . . . . 195 . . . . . . . . . . . . . . 195 ............... ............... 193 193 . . . . . . . . . . . . . . 192 . . . . . . . . . . . . . . 192 . . . . . . . . . . . . . . 192 .............. .............. 231 .............. .............. .............. .............. .............. 198 193 . . . . . . . . . . . . . . 195 . . . . . . . . . . . . . . 192 . . . . . . . . . . . . . . 194 .............. .............. 198 . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 198 . . . . . . . . . . . . . . . 197 . . . . . . . . . . . . . . 199 .............. Index 163 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 . . . . . . . . . . . . . . 163 .............. Index Index 186 186 . . . . . . . . . . . . . 186 . . . . . . . . . . . . . 186 . . . . . . . . . . . . . 183 BFV751J-3/8 . . . . . . . . 180 BFV751J-5/8 . . . . . . . . 180 BFV755-1/2 . . . . . . . . . 181 BFV755-3/8 . . . . . . . . . 181 BFV2008 . . . . . . . . . . . 179 BKW188 . . . . . . . . . . . . . 57 BL1400 Series . . . . . . 126 BMM-3 . . . . . . . . . . . . . 191 BMM-3L . . . . . . . . . . . . 191 BMM-3S . . . . . . . . . . . . 191 BP375SS . . . . . . . . . . . . 117 BP425SS . . . . . . . . . . . . 117 BP475SS . . . . . . . . . . . . 117 BPC Series . . . . . . . . . . 111 BTS22TH . . . . . . . . . 38,39 ............. 184 . . . . . . . . . . . . . 184 . . . . . . . . . . . . . 185 . . . . . . . . . . . . . 185 . . . . . . . . . . . . . 184 BFV2009 BFV2010 BFV2011 BFV2012 BFV2013 179 . . . . . . . . . . . 179 . . . . . . . . . . . 179 . . . . . . . . . . . 179 . . . . . . . . . . . 179 BMM-4 . . . . . . . . . . . . . 191 BMM-4L . . . . . . . . . . . . 191 BMM-4S . . . . . . . . . . . . 191 BMM-5 . . . . . . . . . . . . . 191 BMM-5L . . . . . . . . . . . . 191 BVP Series . . . . . . . . . . 119 BVS-12 . . . . . . . . . . . . . 121 BVS-120 . . . . . . . . . . . . 121 BVT Series . . . . . . . . . 118 CLDP10 . . . . . . . . . . . . 139 183 185 . . . . . . . . . . . . . 184 . . . . . . . . . . . . . 179 . . . . . . . . . . . . . 183 BFV2014 . . . . . . . . . . . 179 BFV2015 . . . . . . . . . . . 179 BFV2016 . . . . . . . . . . . 179 BFV2017 . . . . . . . . . . . 179 BFV3104 -1 thru 6 . . 181 BMM-5S . . . . . . . . . . . . 191 BMM-6 . . . . . . . . . . . . . 191 BMM-6L . . . . . . . . . . . . 191 BMM-6S . . . . . . . . . . . . 191 BMS-6 . . . . . . . . . . . . . . . 46 CNPSS Series . . . . . . . . 53 DB__DS Series . 140-141 DB5 . . . . . . . . . . . . . . . . 137 DB10 . . . . . . . . . . . . . . . 137 DB10-28 . . . . . . . . . . . . 138 BFV202 . . . . . . . . . . . . . 183 BFV-223 . . . . . . . . . . . . 177 BFV-223WO . . . . . . . . 177 BFV-224 . . . . . . . . . . . . 177 BFV-224WO . . . . . . . . 177 BFV3104-8 . . . . . . . . . 181 BFV3104-10 . . . . . . . . 181 BFV3104-12 . . . . . . . . 181 BFVATR Series . . . . . 178 BFVATRHN Series . 178 BMS-6L . . . . . . . . . . . . . . 47 BMS-6M . . . . . . . . . . . . . 47 BMS-6S . . . . . . . . . . . . . . 47 BMS-8 . . . . . . . . . . . . . . . 46 BMS-8L . . . . . . . . . . . . . . 47 DB10-36 . . . . . . . . . . . . 138 DB10-42 . . . . . . . . . . . . 138 DB10-50 . . . . . . . . . . . . 138 DB10-60 . . . . . . . . . . . . 138 DB20 . . . . . . . . . . . . . . . 137 BFV-225 . . . . . . . . . . . . 177 BFV-225WO . . . . . . . . 177 BFV-228 . . . . . . . . . . . . 177 BFV-228WO . . . . . . . . 177 BFV280SQ . . . . . . . . . 187 BFVFW Series . . . . . . 178 BFVHHCS Series . . . 177 BFVHN Series . . . . . . 177 BHR1225ZN . . . . . . . . . 56 BHR1238ZN . . . . . . . . . 56 BMS-8M . . . . . . . . . . . . . 47 BMS-8S . . . . . . . . . . . . . . 47 BMS-10 . . . . . . . . . . . . . . 46 BMS-10L . . . . . . . . . . . . 47 BMS-10M . . . . . . . . . . . . 47 DB30 . . . . . . . . . . . . . . . 137 DB40 . . . . . . . . . . . . . . . 137 DB48 . . . . . . . . . . . . . . . 137 DB610 . . . . . . . . . . . . . . 137 DB620 . . . . . . . . . . . . . . 137 BFV281SQ . . . . . . . . . 187 BFV300 . . . . . . . . . . . . . 179 BFV334 . . . . . . . . . . . . . 185 BFV337 . . . . . . . . . . . . . 185 BFV340 . . . . . . . . . . . . . 183 BHR1250ZN . . . . . . . . . 56 BHR1262ZN . . . . . . . . . 56 BK22H112 . . . . . . . . . . . 42 BK24H112 . . . . . . . . . . . 42 BK52H112 . . . . . . . . . . . 42 BMS-10S . . . . . . . . . . . . 47 BMS-12 . . . . . . . . . . . . . . 46 BMS-12M . . . . . . . . . . . . 47 BMS-12S . . . . . . . . . . . . 47 BMS-D-12 . . . . . . . . . . . 46 DB630 . . . . . . . . . . . . . . 137 DB640 . . . . . . . . . . . . . . 137 DB648 . . . . . . . . . . . . . . 137 DBE10-8 . . . . . . . . . . . . 139 DBE10-12 . . . . . . . . . . 139 BFV341 . . . . . . . . . . . . . 184 BFV342 . . . . . . . . . . . . . 184 BFV371-2G . . . . . . . . . 186 BFV409 Series . . . . . . 182 BFV494 Series . . . . . . 182 BK54H112 . . . . . . . . . . . 42 BKC100 . . . . . . . . . . . . . . 57 BKC150 . . . . . . . . . . . . . . 57 BKC200 . . . . . . . . . . . . . . 57 BKCC . . . . . . . . . . . . . . . . 57 BMS-D-12L . . . . . . . . . . 47 BMS-D-12M . . . . . . . . . 47 BMT-6 . . . . . . . . . . . . . . . 48 BMT-8 . . . . . . . . . . . . . . . 48 BMT-10 . . . . . . . . . . . . . . 48 DBE10-16 . . . . . . . . . . 139 DBM . . . . . . . . . . . . . . . 137 DBM-__ Series . . . . . 138 DBM-__CT Series . . 138 DBP . . . . . . . . . . . . . . . . 137 BFV501 Series . . . . . . 176 BFV532 . . . . . . . . . . . . . 185 BFV557 . . . . . . . . . . . . . 183 BFV558 . . . . . . . . . . . . . 186 BFV650 . . . . . . . . . . . . . 187 BKCP . . . . . . . . . . . . . . . . 57 BKP10063 . . . . . . . . . . . 57 BKP10094 . . . . . . . . . . . 57 BKP15094 . . . . . . . . . . . 57 BKP15125 . . . . . . . . . . . 57 BMT-12 . . . . . . . . . . . . . . 48 BMT-D-12 . . . . . . . . . . . 48 BP081SS . . . . . . . . . . . . 117 BP110SS . . . . . . . . . . . . 117 BP135SS . . . . . . . . . . . . 117 DBR10-12 . . . . . . . . . . 139 DBR2-31/2 . . . . . . . . . 142 DBR4-6 . . . . . . . . . . . . . 142 DBR8-10 . . . . . . . . . . . 142 DBR12-14 . . . . . . . . . . 142 BFV655 Series . . . . . . 178 BFV751-1/2 . . . . . . . . . 180 BFV751-3/8 . . . . . . . . . 180 BFV751-5/8 . . . . . . . . . 180 BFV751J-1/2 . . . . . . . . 180 BKP20125 . . . . . . . . . . . 57 BKP20188 . . . . . . . . . . . 57 BKW063 . . . . . . . . . . . . . 57 BKW094 . . . . . . . . . . . . . 57 BKW125 . . . . . . . . . . . . . 57 BP175SS BP205SS BP250SS BP300SS BP325SS DBR16-20 . . . . . . . . . . 142 DC-1 . . . . . . . . . . . . . . . . 147 DC-2 . . . . . . . . . . . . . . . . 147 DC-3 . . . . . . . . . . . . . . . . 147 DC-4 . . . . . . . . . . . . . . . . 147 BFV101 BFV103 BFV104 BFV118 BFV129 ............. BFV132 BFV133 BFV135 BFV136 BFV140 BFV141 BFV142 BFV143 BFV200 BFV201 ............. ............. ............. ........... 232 117 117 . . . . . . . . . . . . 117 . . . . . . . . . . . . 117 . . . . . . . . . . . . 117 ............ ............ Index DC-5 DC-6 DC-7 DC-8 DC-9 147 147 . . . . . . . . . . . . . . . . 147 . . . . . . . . . . . . . . . . 147 . . . . . . . . . . . . . . . . 147 N224WOSS6 . . . 167,169 N225 . . . . . . . . . . . . . . . . . 47 N225SS6 . . . . . . . 167,169 N225WO . . . . . . . . . . . . . 46 N225WOSS6 . . . 167,169 N722 . . . . . . . . . . . . . . . . . 47 N723 . . . . . . . . . . . . . . . . . 47 N724 . . . . . . . . . . . . . . . . . 47 N724SS6 . . . . . . . . . . . . 167 N725 . . . . . . . . . . . . . . . . . 47 SN528 Series . . . . . . . . . 49 SN724 Series . . . . . . . . . 49 SN725 Series . . . . . . . . . 49 SN728 Series . . . . . . . . . 49 SQN Series . . . . . . . . . . . 54 DC-10 . . . . . . . . . . . . . . 147 DC-11 . . . . . . . . . . . . . . 147 DC-12 . . . . . . . . . . . . . . 147 DC22S-12 . . . . . . . . . . 145 DC22S-24 . . . . . . . . . . 145 N226 . . . . . . . . . . . . . . . . . 47 N226WO . . . . . . . . . . . . . 46 N227 . . . . . . . . . . . . . . . . . 47 N227WO . . . . . . . . . . . . . 46 N228 . . . . . . . . . . . . . . . . . 47 N725SS6 . . . . . . . . . . . . 167 N726 . . . . . . . . . . . . . . . . . 47 N727 . . . . . . . . . . . . . . . . . 47 N728 . . . . . . . . . . . . . . . . . 47 N728SS6 . . . . . . . . . . . . 167 SRHMS Series STN224 Series STN225 Series STN228 Series STN525 Series DC22S-48 . . . . . . . . . . 145 DC22S-120 . . . . . . . . . 145 DCN 3/8 . . . . . . . . . . . . . . 52 DCR38-36 . . . . . . . . . . 148 DCR38-72 . . . . . . . . . . 148 N228SS6 . . . . . . . 167,169 N228WO . . . . . . . . . . . . . 46 N228WOSS6 . . . 167,169 N255 . . . . . . . . . . . . . . . . . 47 N255WO . . . . . . . . . . . . . 46 N755 . . . . . . . . . . . . . . . . . 47 N775 . . . . . . . . . . . . . . . . . 47 N778 . . . . . . . . . . . . . . . . . 47 N2500 Series . . . . . . . . 207 N7221 . . . . . . . . . . . . . . 191 TN221 TN222 TN223 TN224 TN225 ............... DCSPSS4 . . . . . . . . . . . 148 DCWM-12 . . . . . . . . . . 146 DCWM-24 . . . . . . . . . . 146 DCWM-48 . . . . . . . . . . 146 DCWM-120 . . . . . . . . . 146 N275 . . . . . . . . . . . . . . . . . 47 N275WO . . . . . . . . . . . . . 46 N278 . . . . . . . . . . . . . . . . . 47 N278WO . . . . . . . . . . . . . 46 N521 . . . . . . . . . . . . . . . . . 47 N7222 N7224 N7227 NW524 NW525 191 191 . . . . . . . . . . . . . . 191 . . . . . . . . . . . . . . 49 . . . . . . . . . . . . . . 49 TN226 TN227 TN228 TN255 TN525 ............... E7016 . . . . . . . . . . . . . . . 200 E7016H3/4 . . . . . . . . . . 200 E7166 . . . . . . . . . . . . . . . 200 E7212 . . . . . . . . . . . . . . . 200 E7355 . . . . . . . . . . . . . . . 200 N522 . . . . . . . . . . . . . . . . . 47 N523 . . . . . . . . . . . . . . . . . 47 N524 . . . . . . . . . . . . . . . . . 47 N524SS6 . . . . . . . 167,169 N525 . . . . . . . . . . . . . . . . . 47 NW528 SA101 SA102 SA110 SA131 FFW Series . . . . . . . . . . . 55 FN224 . . . . . . . . . . . . . . . 48 FN228 . . . . . . . . . . . . . . . 48 FW Series . . . . . . . 55, 147 HHCS Series . . . . . . . . . 53 N525SS6 . . . . . . . 167,169 N525WO . . . . . . . . . . . . . 46 N525WOSS6 . . . . . . . 167 N526 . . . . . . . . . . . . . . . . . 47 N527 . . . . . . . . . . . . . . . . . 47 SA154 SA155 SA158 SA276 SA318 HN Series . . . . . . . . . . . . 54 IPH Series . . . . . . . . . . 120 IPH18230 . . . . . . . . . . . 120 ISO . . . . . . . . . . . . . . . . . 121 LW Series . . . . . . . . . . . . 55 N528 . . . . . . . . . . . . . . . . . 47 N528SS6 . . . . . . . 167,169 N555 . . . . . . . . . . . . . . . . . 47 N555WO . . . . . . . . . . . . . 46 N575 . . . . . . . . . . . . . . . . . 47 SC228 . . . . . . . . . . . . . . . . 55 SC-UB . . . . . . . . . . . . . . . 55 SFHMS Series . . . . . . . 53 SFN38SS6 . . . . . . . . . . 147 SHHMS Series . . . . . . . 53 MSQN Series . . . . . . . . 54 N221 . . . . . . . . . . . . . . . . . 47 N221WO . . . . . . . . . . . . . 46 N222 . . . . . . . . . . . . . . . . . 47 N222WO . . . . . . . . . . . . . 46 N575WO . . . . . . . . . . . . . 46 N621 . . . . . . . . . . . . . . . . 191 N621WO . . . . . . . . . . . 191 N622 . . . . . . . . . . . . . . . . 191 N622WO . . . . . . . . . . . 191 SLN Series . . . . . . . . . . . 55 SN224 Series . . . . . . . . . 49 SN224WO Series . . . . 49 SN225 Series . . . . . . . . . 49 SN225WO Series . . . . 49 N223 . . . . . . . . . . . . . . . . . 47 N223WO . . . . . . . . . . . . . 46 N224 . . . . . . . . . . . . . . . . . 47 N224SS6 . . . . . . . 167,169 N224WO . . . . . . . . . . . . . 46 N624 . . . . . . . . . . . . . . . . 191 N624WO . . . . . . . . . . . 191 N627 . . . . . . . . . . . . . . . . 191 N627WO . . . . . . . . . . . 191 N721 . . . . . . . . . . . . . . . . . 47 SN228 Series . . . . . . . . . 49 SN228WO Series . . . . 49 SN524 Series . . . . . . . . . 49 SN525 Series . . . . . . . . . 49 SN525WO Series . . . . 49 ................ ................ .............. 49 215 . . . . . . . . . . . . . . 215 . . . . . . . . . . . . . . 215 . . . . . . . . . . . . . . 215 .............. .............. 215 . . . . . . . . . . . . . . 215 . . . . . . . . . . 211-214 . . . . . . . . . . 211-214 . . . . . . . . . . 211-214 .............. 48 48 . . . . . . . . . . . . . . . 48 . . . . . . . . . . . . . . . 48 . . . . . . . . . . . . . . . 48 ............... 48 48 . . . . . . . . . . . . . . . 48 . . . . . . . . . . . . . . . 48 . . . . . . . . . . . . . . . 48 ............... Index 233 .............. 53 . . . . . . . 48 . . . . . . . 48 . . . . . . . 48 . . . . . . . 48 ....... Notes 234 Notes 235 Notes 236 INTRODUCTION Cooper B-Line, Inc. is a leading manufacturer and fabricator of steel and aluminum products which are used in support of equipment for industrial, commercial, utility, and OEM installations. Cooper B-Line is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our metal framing product line. Our customers have access to the most complete support systems offered in the industry, including metal framing, cable tray, pipe hangers, slotted angle, and fasteners. Many of Cooper B-Line s products are listed by the Underwriter s Laboratories, Inc. All Cooper B-Line products are manufactured to meet or exceed MFMA and other industry standards set for their design and manufacture. The majority of Cooper B-Line products are produced in four modern plants consisting of approximately 900,000 square feet. These facilities are located in Highland, Illinois; Troy, Illinois; Reno, Nevada; and Sherman, Texas. Regional sales and distribution centers are located throughout the United States stocking standard Cooper B-Line products for quick service and delivery. This catalog is designed to be helpful to engineers and contractors in the application and selection of strut products for construction and maintenance. If a unique application requires a special product not included in this catalog. Cooper B-Line engineering personnel are ready to furnish design consultation and realistic cost estimates. In addition, sales representatives with engineering know-how are located throughout the United States and abroad for your convenience. Cooper B-Line, Inc. 509 West Monroe Street Highland, Illinois 62249-0326 Phone: 800-851-7415 www.cooperbline.com © 2008 Cooper B-Line Strut Systems Other Cooper B-Line Product Lines Cable Tray Systems Electrical Enclosures Electronic Enclosures Pipe Hanger & Support Systems Spring Steel Fasteners Cable Runway & Relay Racks (CommData) Meter Mounting & Distribution Equipment Anchors SS-08R www.cooperbline.com Questions, Comments, Suggestions? B-VOCAL with Cooper B-Line ” ““ SSMM Voice Of the Customer...Actively Listening bvocal@cooperindustries.com 618-654-2184 ext. 456 SYSTEMS THAT MAKE SENSE Cooper Industries, Ltd. 600 Travis, Ste. 5800 Houston, TX 77002-1001 Phone: 713-209-8400 www.cooperindustries.com © 2008 Cooper B-Line, Inc. Strut Systems SS-08R Cooper B-Line 509 West Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 Printed in U.S.A. 35708 Channels, Hardware, Fittings. Mechanical & Electrical Accessories, Special Materials (Aluminum, Stainless Steel, Fiberglass), Mini Channel, Concrete Inserts, Slotted Angle, Kwik-Wire™, Roof-Top Supports
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : QuarkXPress(tm) 6.0 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (**PANTONE 200 C).%%CMYKCustomColor: 0 1 .63 .12 (**PANTONE 200 C).%%EndComments Create Date : 2008:07:01 15:35:50Z Creator Tool : QuarkXPress(tm) 6.0 Modify Date : 2008:08:07 10:19:46-05:00 Metadata Date : 2008:08:07 10:19:46-05:00 Document ID : uuid:8d5410aa-47ad-11dd-a306-0017f2c99344 Instance ID : uuid:9bdd5b3a-7dbc-4c09-9154-7aacb7bc1706 Format : application/pdf Title : Layout 1 Has XFA : No Page Count : 244 Creator : QuarkXPress(tm) 6.0EXIF Metadata provided by EXIF.tools