101357 Catalog
113167-Catalog 113167-Catalog 113167-Catalog 785901 Batch7 unilog cesco-content
63371-Attachment 63371-Attachment 63371-Attachment 785901 Batch5 unilog cesco-content
2014-07-05
: Pdf 101357-Catalog 101357-Catalog 785901 Batch5 unilog
Open the PDF directly: View PDF
Page Count: 30
- Selection Guide
- General Information
- General Information
- General Duty, Light Duty & Air Conditioning Disconnects
- Single Throw 120/240 Vac, 1-Pole, 2-Pole & 3-Pole
- Light Duty Switches
- General Duty 2-Pole + S/N
- General Duty 3-Pole + S/N
- Unfused Air Conditioning Disconnect - Moulded Case Switch
- • Fusible switches are suitable for use as service equipment except where marked s.
- s Not suitable for use as service equipment.
- 7 Does not contain over current protection. Suitable for use on systems with up to 10,000 RMS Symmetrical Amperes available fault current at 240Vac max when protected by a fuse or circuit breaker rated 60A or less.
- • Type 3R Switches with ”RB” suffix are supplied with main entry hole cut in top endwall and closing cap (BCAP) installed. Hole accepts 3/4 in. to 2 1/2 in. hubs.
- • “Ser.” denotes the Series of the device. Please refer to this column when selecting accessories.
- Q For 200% neutral, order (1) additional neutral kit CSN20, and (1) neutral jumper kit SN20NI.
- * For installing class J fuses:
- - Relocation of the load side fuse base assembly is required in 100-400 A, 240V switches
- Application Information
- Single Throw 120/240 Vac, 1-Pole, 2-Pole & 3-Pole
- General Duty
- Heavy Duty
- Heavy Duty
- Heavy Duty
- Heavy Duty
- Heavy Duty
- Heavy Duty
- Heavy Duty, Special Application
- Single Throw 600 Volt, 3-Pole
- n Includes PKDB-1, breather and drain kit, required for rain proof application - Type 7 only.
- Electrical Interlocks not available. For auxiliary switches, add 1212 suffix to standard switch catalogue number and price adder (e.g. H60XFA1212)
- Auxiliary Interlocks factory Installed only.
- s Not CSA certified or UL listed due to wire bending space requirements.
- • “Ser.” denotes the Series of the device. Please refer to this column when selecting accessories.
- Application Information
- Single Throw 600 Volt, 3-Pole
- Heavy Duty, Special Application
- Heavy Duty Receptacle Switches
- Heavy Duty
- 1000 Vdc Photovoltaic Disconnect Switch
- Put over 100 years of Schneider Electric’s experience as a global specialist in energy management to work on your photovoltaic (PV) project. The Square D 1000 Vdc disconnect switch is the perfect solution for your 1000 Vdc PV disconnect application...
- 1000 Vdc Photovoltaic Heavy Duty Disconnect Switch and Accessories
- s Order EIK1PV for single contact field-installed kit.
- n Order EIK2PV for double contact field-installed kit.
- u Accommodates (2) 250 max Cu or (1) 1/0 max Cu wiring; Order SN20CPV for
- field-installed kit.
- H Required when adding surge arrestors. Accommodates (2) 6-300 Cu/Al
- wiring; One lug for the line connection and one for the surge arrestor
- connection.
- Order AL20DTF for field installable kit.
- t Order REHGND KIT for field installable kit.
- s Terminal blocks standard with 3 pole switches; accommodates (2) 1/0 max
- Al/Cu or (2) 6 max Al/Cu wiring.
- Put over 100 years of Schneider Electric’s experience as a global specialist in energy management to work on your photovoltaic (PV) project. The Square D 1000 Vdc disconnect switch is the perfect solution for your 1000 Vdc PV disconnect application...
- 1000 Vdc Photovoltaic Disconnect Switch
- Heavy Duty, Special Application
- Heavy Duty
- DE2_P21-30.pdf
- Application Information
- Double Throw
- Heavy Duty
- Accessories
- Example: CH361HE
- Example: CH361FP
- s 30A, 4- and 6-pole, Series F5 use FPK0610.
- H H362AWAVW & CH362AWC, use FPK0610 Fuse Puller Kit.
- u On 600 V, 200 A switches, 100,000 A max. on corner grounded delta when protected by Class J or R fuses.
- * Applies to NEMA 1, 3R, 4X stainless, 12 switches.
- ** Amperage rating of fuse or circuit breaker not to exceed switch amperage rating.
- *** All H and J circuit breakers are acceptable, but will only support the noted Short
- Circuit Current Rating
- Accessories
- Heavy Duty
- Accessories
- Example: CH365VW
- Example: CH361DSWW
- Push buttons, pilot lights and selector switches are available factory installed in the cover of Type 1, 4/4X, 3R/12, 600V heavy duty safety switches. For more information please refer to D3110HO0701BP. Voltage indicators are available factory instal...
- Example: CH361NDS
- Application Information
- Accessories
- Heavy Duty
- Accessories
- Example: CH361EI
- • Electrical interlock kit catalogue numbers with -1 suffix indicates one normally open and one normally closed contact; -2 indicates two normally open and two normally closed contacts.
- • Not suitable for Elevator use.
- H HU461AWK uses EK306-1,2; H461, H461 DS, H461AWK, HU461, HU461DS, HU661DS, HU661AWK, H361AWAVW, CH361AWC, CHU361AWA, CHU361AWC use EIK-1,2.
- Q Safety switches complete with voltage monitors use EIK1 or EIK2.
- u Single pole throw interlock kits are rated 1/2 HP @ 110 and 220Vac.
- Example: CH364KI
- KI = 1 lock per switch
- KI2 = 1 lock with 2 cylinders per switch
- KIKI = 2 separate locks per switch
- Example: CH361SPLO
- Application Information
- Accessories
- Heavy Duty
- Accessories
- Rainproof Bolt-On Hubs —
- • Type 3R rainproof enclosures have a bolt-on closing cap factory installed. Order bolt-on hubs separately from table above. Hubs thru size 2 1/2 can be directly installed on RB devices. Devices requiring 3" or larger hubs must have holes cut in th...
- • All hubs are CSA Certified for indoor and rainproof applications.
- u Two required if grounding conductors are run in parallel.
- Application Information
- Accessories
- Heavy Duty
- Double Throw Types 82,000, 92,000 and DTU (A-Series)
- Double Throw Types DT, DTU (F-Series)
- General Duty
- Application Information