Product Detail Manual
Rts rts rts spec products outdoor epsg.prod
2014-07-05
: Pdf 101931-Attachment 101931-Attachment 785988 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
rts series poles Cat. # Approvals Job Type Outdoor Lighting round tapered steel applications • Lighting installations for top mounting of luminnaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location. features Group 1 • Round Tapered Steel Shaft • One-piece construction • Ground lug standard • Galvanized anchor bolts and template included (4-bolt design), nut cover for anchor bolts standard • Reinforced handhole standard • Optional Base Cover features Group 2 • Round Tapered Steel Shaft • One or two-piece construction • Side or tenon mounting • Ground lug standard • Galvanized anchor bolts and template included (4-bolt design), nut cover for anchor bolts standard • Reinforced handhole standard • finish: Durable Lektrocote® TGIC thermoset polyester powder coat paint finish with nominal 3.0 mil thickness. Zinc-rich powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method. Decorative finish coat available in seven standard colors. Custom colors available. RAL number preferable. Internal protective coating available. Lektrocote® meets or exceeds the following standards: – Exterior Durability: up to five years Florida exposure with 10% or less gloss reduction. – ASTM B-117: 1000 hour salt spray test. – ASTM D-2247: 1000 hour salt spray test. Round Straight and Tapered Pol es Straight Square – ASTM D-2794: 1000 hour salt spray test. I) (Excluding RTA Group and Tapered Poles – ASTM D-522: 1000 hour salt spray test. Anchor Bolt Anchor Bolt – Location ASTM 3359B: 1000 hour salt sprayLocation test. in in Relation to Shaft Rotation Relation to Shaft Rotation base detail Handhole Nominal Height Handhole 12" 15 amp gfci receptacle & cover Handhole Anchor Rods (4 req’d.) GASKET Hex Nuts (4 req’d.) 21 mid-pole luminaire bracket .50 1/4’ FILLET WELD ALL AROUND. Plain Washers (4 req’d.) Base Plate Bolt Projection Finish Grade Plain Washers (4 req’d.) Hex Nuts (4 req’d.). Grout after pole is set and plumbed Foundation Level 121 COVER Engineering of footing by others GASKET 1/4’ FILLET WELD ALL AROUND. SEE NOTE 1. accessories: bull horn brackets Bolt Square Bolt Circle Straight Square and Tapered Poles Q32-Q33 OPTION Q18 OPTION (order as separate part #, field installed) Maximum Loading Catalog Number Fixture Qty. Weight lbs (kg) THB-21 2 210 (95.3) THB-21-M53 2 210 (95.3) THB-31 3 315 (142.9) THB-32 3 315 (142.9) THB-41 4 420 (190.5) Tapered Pol es Round Straight and THB-43 4 420 (190.5) (Excluding RTA Group I) Anchor Bolt Location in Relation to Shaft Rotation Handhole 1 33 Anchor Bolt Location in Relation A height to Shaft Rotation thb-21 B Handhole A B Anchor Rods (4 req’d.) 30” 16” Hex Nuts (4 req’d.) 406 mm 762 mm E arm to arm B C D 15” 19” 381 mm 483 mm Finish Two tenons at 180° Two tenons at 180° Three tenons at 180° Three tenons at 120° Four tenons at 180° Four tenons at 90° Bronze Gray Bronze Bronze Bronze Bronze Weight lbs. (kg) 17 (7.7) 17 (7.7) 30 (13.6) 23 (10.4) 43 (19.5) 29 (13.1) EPA ft² (m²) .9 (0.1) .9 (0.1) 1.5 (0.1) 1.2 (0.1) 2.2 (0.2) 1.3 (0.1) F C C A height thb-31 Description B A height thb-32 E 27” 686 mm F 22.5” 572 mm C F arm to arm A height A height thb-41 thb-43 Plain Washers (4 req’d.) hubbell outdoor lighting Sheet # rtspolesout-spec8/11 Base Plate Finish Grade Bolt Projection ordering information r Cross Section Catalog Number Height ft Shaft Base Dim. RTS-20-65-1-ta-XX RTS-25-70-1-ta-XX RTS-30-80-1-ta-XX RTS-35-85-1-ta-XX RTS-39-90-1-ta-XX 20 25 30 35 39 6.5 7 8 8.5 9 RTS-10-50-1-ta-XX RTS-12-50-1-ta-XX RTS-14-50-1-ta-XX RTS-16-50-1-ta-XX RTS-18-50-1-ta-XX RTS-20-60-1-ta-XX RTS-25-70-7-ta-XX RTS-30-80-7-ta-XX RTS-35-85-7-ta-XX RTS-35-95-1-ta-XX RTS-40-90-1-ta-XX RTS-40-90-7-ta-XX RTS-50-10-1-ta-XX RTS-50-11-7-ta-XX RTS-60-12-1-ta-XX RTS-60-12-7-ta-XX 10 12 14 16 18 20 25 30 35 35 40 40 50 50 60 60 5 5 5 5 5 6 7 8 9 9.5 9 9 10 11 12 12 - t Style - s - Material 30 Nominal Length - 80 Nominal Shaft Dia. - 1 Shaft Thickness - TA - Mounting Type Wind Load Rating1 80 90 100 120 Shaft Wall Bolt Base Plate Anchor Bolt Bolt mph mph mph mph Size Thick. Circle (sq) Size Proj. Group 1 22 17.2 14 9 6.5 x 3.7” .119 9.5 - 13” 12.5” 1 x 36 x 4” 4” 18 14 12 6 7 X 3.5” .119 10 - 13” 12.5” 1 x 36 x 4” 4” 18 14 10 6 8 X 3.8” .119 11 - 13.5” 12.5” 1 x 36 x 4” 4” 14 10.6 7 4 8.5 X 3.6” .119 11.5 - 13.5” 12.5” 1 x 36 x 4” 4” 14 10.4 7 3 9 X 3.5” .119 12.5 - 13.5” 12.5” 1 x 36 x 4” 4” Group 2 45 37 30 - 4.5 x 3.1” .119 o n s u l t T e m p l a t e f o r I n f o r m a t i o n C 42 34 28 - 4.8 x 3.1” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 40 32 27 - 5.1 x 3.1” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 32 26 21 - 5.4 x 3.1” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 28 23 18 - 5.6 x 3.1” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 22 18 14 - 6.1 x 3.3” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 23 - 14.5 10.5 7 x 3.5” .179 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 26 - 16.5 - 8 x 3.8” .179 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 22 - 14 9.6 8.5 x 3.6” .179 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 27 - 16.5 - 9.5 x 4.6” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 17.2 - 11.1 7.2 9 x 3.6” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 22 - 13.5 - 9 x 3.6” .179 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 12.5 - 8.1 5.2 10 x 3” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 28.3 - 18.6 12.3 11 x 4” .179 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 19.7 - 12.5 9 12 x 3.84” .119 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n 34 - 22.7 15.5 12.5 x 4.46” 2pc2 C o n s u l t T e m p l a t e f o r I n f o r m a t i o n db Finish Pole Wt. (lbs) 187 226 290 340 382 72 84 96 109 122 149 305 433 510 510 382 565 730 835 1088 1451 1 Allowable EPA with 1.3 gust factor. To determine maximum pole loading weight, multiply allowable EPA by 30 lbs. Example: RTS-20-60-1 pole in 100 MPH zone = 420 lbs (14 x 30). 2 Two-piece pole (bottom section = .179, top section = .119 Note Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. Note Group 1 only: Bolt circle (suggested) values: 20’ pole = 9.5”, 25’ pole = 10”, 30’ pole = 11”, 35’ pole = 11.5”, 39’ pole = 12.5”. complete part number requires shaft above plus mounting type, finish & appropriate options below Mounting Type TA Tenon (2.375” OD) Finish DB Dark Bronze BL Black WH White GR Gray PS Platinum Silver CC Custom Color (Consult Factory) PR Primer Only gl Hot Dip Galvanized (consult factory for Group 1) options Q18 3 15 Amp GFCI Receptacle and Cover Q22 3 Extra Handhole Q26 3 .5” Coupling Q27 3 .75” Coupling Q30 3 2” Coupling Q32 3 Mid-pole Luminaire Bracket Q40 Vibration Damper Q45 Square Base Cover LAB Less Anchor Bolts Due to our continued efforts to improve our products, product specifications are subject to change without notice. Hubbell Outdoor Lighting • 701 Millennium Drive • Greenville, SC 29607 • phone: 864-678-1000 For more information visit our web site: www.hubbelloutdoor.com Outdoor Lighting Copyright © 2011 hubbell outdoor lighting All Rights Reserved rtspoleout-spec8/11 Printed in USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2012:05:08 08:28:06-04:00 Creator : Adobe InDesign CS5.5 (7.5) Modify Date : 2012:05:08 08:49:33-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:1d7732fa-c353-224e-b43a-51394018b6af Document ID : adobe:docid:indd:450ae980-b43d-11e0-8f6e-8dbcce68d534 Original Document ID : adobe:docid:indd:450ae980-b43d-11e0-8f6e-8dbcce68d534 Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:47B1896E4A206811A613A6B3E7065315, xmp.iid:48B1896E4A206811A613A6B3E7065315, xmp.iid:8470F92B4D2068118083A09481D962D6, xmp.iid:8570F92B4D2068118083A09481D962D6, xmp.iid:DD19EEC3682068118083A09481D962D6, xmp.iid:881DE9CC682068118083A09481D962D6 History When : 2011:08:10 21:41-04:00, 2011:08:10 21:41-04:00, 2012:05:07 16:42:39-04:00, 2012:05:07 16:42:39-04:00, 2012:05:08 08:27:02-04:00, 2012:05:08 08:27:17-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata Metadata Date : 2012:05:08 08:49:33-04:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 12381 bytes, use -b option to extract), (Binary data 9427 bytes, use -b option to extract) Doc Change Count : 43 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False State : 1 Version : 1.1 Page Count : 2 Signing Date : 2012:05:08 07:49:33-05:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, Export Document Usage Rights : FullSave Form Usage Rights : Add, FillIn, Delete, SubmitStandalone Signature Usage Rights : ModifyEXIF Metadata provided by EXIF.tools