Schneider Electric DIGEST 175 Metering Equipment Brochure

551171-Brochure 551171-Brochure 551171-Brochure 785901 Batch5 unilog cesco-content

102577-Brochure 102577-Brochure 102577-Brochure 785901 Batch6 unilog cesco-content

648220-Attachment 648220-Attachment 648220-Attachment 785901 Batch5 unilog cesco-content

2014-06-03

: Pdf 102621-Brochure 102621-Brochure 785901 Batch4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 16

DownloadSchneider Electric DIGEST 175 - Metering Equipment Brochure
Open PDF In BrowserView PDF
Table of Contents

Section 2
Metering Equipment
Meter Sockets
Ring and Ringless Type Individual Meter Sockets

2-2

Horizontal Ganged, Test Block Bypass Sockets and Accessories

2-3

Dimensions

2-4

MP Meter-PakTM Meter Centers
Individual Meter Socket
Page 2-2

Ring and Ringless Devices

2-5

Tenant Circuit Breakers and Accessories

2-6

Dimensions

2-7

2-8

Selection Information

2-9

Indoor/Rainproof Meter Center

2-10

Branch Devices

2-11

Main Devices

2-12

Branch Devices

2-13

EZM Main Devices

2-14

EZ Meter-Pak® Meter Centers and Accessories

2-15

Dimensions

2-16

2

New!

Indoor/Rainproof Meter Center Information

METERING EQUIPMENT

EZ Meter-Pak® Meter Centers

MP Meter-Pak Metering Equipment
Page 2-5

EZ Meter-Pak Metering Equipment
Page 2-8

© 2009 Schneider Electric
All Rights Reserved

2-1

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Meter Sockets

Ring and Ringless Type Individual Meter Sockets
Class 4131
www.schneider-electric.us

•

Available single or three phase, 600 Vac max., with and without horn or lever bypass, overhead and underground
service feed.
• 10 kA short circuit current rating (or higher with utility approval).
• UL Listed, NEMA 3R enclosure.
• Units supplied with bonded neutral.
• Units supplied with hub opening in top endwall require the use of a bolt-on hub, or closing plate.
• Units supplied with solid top are for underground feed only.
• Accessories, refer to page 2-3.
This metering is generally utility specific. Always check with local utility company before installing. Contact
your nearest Field Sales Office for additional catalog numbers, if required by utility.
Table 2.1:

Individual Meter Sockets
Lug Wire Range (Al/Cu)

UTRS101B

Ampere Jaw
Ratingj Qty.

Service
Type

Cat. No.a

$ Price

Line, Load,
and Neutral
(AWG/kcmil)

Wire
Binding

Enclosure Information
Gnd.
(AWG)

Top Endwall Conf.

Box No.
see
page 2-4

Material

Hub
Openingb

Closing
Plate b

Steel
Steel
Aluminum
Steel
Steel
Steel
Aluminum
Steel
Steel
Aluminum
Steel

Solid Topd
Series A
Series A
Series A
Series A
Series A
Series A
Solid Topd
Series A
Series A
(2)Series A

—
ACP
ACPA
ACP
ACP
ACP
ACPA
—
ACP
ACPA
(2)ACPg

1R
1R
1R
1R
1R
3R
3R
5R
5R
5R
7R

Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel

Series A
A125 c
Series A
Series A
Series A
Series A
Series A
Series A
Solid Topd
Solid Topd

ACP
—
ACP
ACP f
ACP
ACP
ACP
ACP
—
—

1R
1R
1R
4R
4R
3R
4R
5R
2R
4R

Steel
Steel
Steel
Steel
Steel

Series A-L
Series A-L
Series A-L
Series A-L
Series A-L

ACPL
ACPL
ACPL
ACPL
ACPL

8R
9R
8R
9R
11R

Steel
Steel

Series A-L
Series A-L

ACPL
ACPL

9R
10R

Steel

Series A-L

ACPL

12R

Aluminum

Series A-L

ACPLA

12R

Ringless Type, 1Ø3W 600 Vac Max., Without Bypass or Jaw Release

2

125
125
125
125
125
200
200
200
200
200
200

METERING EQUIPMENT

4
4
4
4
5
4
4
4
4
4
4

UG
OH
OH
OH
OH/UG
OH
OH
UG
OH/UG
OH/UG
OH/UG

UTZRS101Ad
UTRS101B
UATRS101B
URS101BCPL
1003880Ae
UTRS202B
UATRS202B
UTRS213Ad
UTRS213Be
UATRS213Be
U92197CCCPLg

123.00
123.00
137.00
135.00
161.00
177.00
195.00
212.00
212.00
225.00
240.00

8–2/0
8–2/0
8–2/0
8–2/0
8–2/0
8–250
8–250
1/0–350
1/0–350
1/0–350
1/0–350

1/2 in. Hex
Slotted
Slotted
Slotted
Slotted
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex

14–2
14–2
14–2
14–2
14–2
14–2
14–2
14–2
14–2
14–2
14–2

Ringless Type, 1Ø3W 600 Vac Max., With Horn Bypass, Without Jaw Release
UTRS202B
(cover not shown)

125
125
125
125
200
200
200
200
200
200

4
5
4
5
4
4
4
4
4
4

OH/UG
OH
OH
OH/UG
OH/UG
OH
OH/UG
OH/UG
UG
UG

UHTRS101B
UGHTRS101Lc
URS101BDQh
UGHTRS111Cf
UBHMRS212Be
UHTRS202B
UHTRS212Be
UHTRS213Be
UHTRS223Ad
URS212ADQdh

161.00
161.00
138.00
207.00
210.00
206.00
206.00
213.00
272.00
203.00

8–2/0
8–2/0
8–2/0
8–2/0
8–250
8–250
8–250
1/0–350
1/0–350
8–250

Slotted
Slotted
1/2 in. Hex
Slotted
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex

14–2
14–2
None
14–2
None
14–2
14–2
14–2
14–2
None

Ringless Type, 1Ø3W 600 Vac Max., With Lever Bypass and Jaw Release
200
200
200
200
320

4
4
5
5
4

OH
OH/UG
OH
OH/UG
OH/UG

UTH4203T
UTH4213Te
UTH5203T
UTH5213Te
UTH4330Tei

465.00
479.00
494.00
564.00
749.00

6–350
6–350
6–350
6–350
Studs Only

1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
1/2 in. Hex
3/8 in. dia. studs

14–2
14–2
14–2
14–2
14–1/0

Ringless Type, 3Ø4W 600 Vac Max., With Lever Bypass and Jaw Release
200
320

7
7

OH/UG
OH

UTH7213Te
UTH7300Ti

666.00
830.00

6–350
Studs Only

1/2 in. Hex
3/8 in. dia. studs

14–2
14–1/0

Ringless Type, 3Ø4W 600 Vac Max., Bolt-On Socket Without Bypass
UTH5203T
(cover not shown)

400

7

OH/UG

UK7T ei

2423.00

Studs Only

400

7

OH/UG

UAK7Tei

2678.00

Studs Only

1/2 in.–20
dia. studs
1/2 in.–20
dia. studs

1/2 in.–20
dia. studs
1/2 in.–20
dia. studs

Ring Type, 1Ø3W 600 Vac Max., Without Bypass or Jaw Release
125
4
OH/UG
URTRS101Be
123.00
8–2/0
Slotted
14–2
Steel
Series A
ACP
1R
200
4
OH/UG
URTRS213Be
212.00
1/0–350
1/2 in. Hex
14–2
Steel
Series A
ACP
5R
a
Device requires approval from the serving utility, consult your nearest Square D/Schneider Electric sales office.
b
Order appropriate bolt-on hub or closing plate separately and install on TOP endwall.
c
Device supplied with 1-1/4 in. bolt-on hub (Cat.No. A125) mounted on TOP endwall.
d
Device supplied with solid top endwall (without hub opening).
e
When unit is installed for underground feed, the appropriate closing plate must be ordered separately and installed over hub opening in TOP endwall of
device.
f
Device supplied with closing plate ACP mounted on TOP endwall.
g
Device supplied with two closing plates ACP mounted in TOP endwall.
h
Contains “Duquesne Light Co.” approved label.
i
Order lugs separately, refer to accessories, page 2-3.
j
Rating is continuous.

URTRS213B

2-2

DE4

Discount
Schedule

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Meter Sockets

Horizontal Ganged, Test Block Bypass Sockets and Accessories
Class 4131

www.schneider-electric.us

Horizontal Ganged Meter Sockets

•

1Ø, 600 Vac max., main lugs only, 2 through 6 meter positions, with and without
horn or lever bypass, end or center feed, overhead and underground service feeds.
10 kA short circuit current rating (or higher with utility approval).
UL Listed, NEMA 3R enclosure.
Supplied with ground lugs.
Supplied with hub opening in top endwall, requires the use of a bolt-on hub, or closing plate.

•
•
•
•

This metering is generally utility specific. Always check with local utility company before installing. Contact
your nearest Field Sales Office for additional catalog numbers, if required by utility.
Ringless Type, 1Ø3W, 600 Vac Max., Without Bypass or Jaw Release

Branch Ratings
Socket Service
No. of
Amperesc Positions
Jaw
Type
Qty.b

100 A

200 A

2
3
4
5
6
2
4

4

5

4

OH/UG

OH/UG

6
a
b
c

Mains
Rating
(A)

Cat. No.

200
205
205
250
300
205
360

UT2R1121B
UT3R1121B
UT4R1131B
UT5R1131B
UT6R1131B
UT2R2122B
UT4R2352T

453.00
560.00
660.00
908.00
1157.00
647.00
1106.00

500

UT5R2392TU

1383.00

620

UT6R2392TU

1548.00

$ Price

Main Lugs
Phase and
Neutral
Al/Cu
(AWG/kcmil)
6–250
6–250
6–350
6–350
6–350
6–250
1/0–500
1/0–500 or
(2)1/0–350
1/0–500 or
(2)1/0–350

Branch Lugs
Phase and
Neutral
Al/Cu (AWG)

8–2/0

8–250

Top Endwalla
Hub Type Closing Plate Box No.
See Page 2-4
(Order
(Order
Separately) Separately)

Series A

ACP

Series A
Series A-L

ACP
ACPL

13R
13R1
14R
15R
16R
17R
18R

Series A-L

ACPL

19R

Series A-L

ACPL

20R

For hubs and closing plates, see Accessories table below.
Fifth jaw kit available to convert 4-jaw socket to a 5-jaw socket. See Accessories table below.
Rating is continuous.

Meter Mains with Test Block Bypass (Meets EUSERC Requirements)
Table 2.3:

Ring Type, 1Ø3W and 3Ø4W, Meter Main with Test Block Bypass (Meets EUSERC Requirements)

Supplied with bondable neutral, suitable for use as service equipment. Suitable for overhead or underground service. UL Listed File E6294.

EMT3225CB

d
e
f
g

System (Incoming)
Meter Ampere Short Circuit
Main Circuit Breaker Type
and
Socket Rating Current
Cat. No.f
$ Price
Rating
(Order Separately)d
Service (Outgoing)
Type
(Max.)
120/240 Vac 1Ø3W
5-Jaw
225 A
100 kA max.
EMT1225CB
4095.00
2P Type QB, QD, QG, QJ, QOe, QO-VHe or QOHe
208Y/120 Vac 3Ø4Wg
or
7-Jaw
225 A
65 kA max.
EMT3225CB
5355.00
3P Type QB, QD, QG or QJ
240/120 Vac 3Ø4W Delta
Refer to page 2-15 to select main circuit breaker.
Requires use of EZM125QOA adapter (order separately), when using QO (40 A–125 A, 2-pole) 10kA max. SCCR, QO-VH (40 A–60 A, 2-pole) 22kA
max. SCCR, or QOH (40 A–60 A, 2-pole) 42kA max. SCCR. Refer to page 2-15 for pricing.
Refer to page 2-4 for box dimensions.
100 kA max.

Table 2.4:

METERING EQUIPMENT

Table 2.2:

2

UT2R1121B

EMT Terminal Wire Size h

Line Phase Lug
Line Neutral Lug
Service Ground Lug
6 AWG–300 kcmil Al/Cu
6 AWG–350 kcmil Al/Cu
4 AWG–300 kcmil Al/Cu
h
Refer to circuit breaker listings for usable load lug wire sizes.

Equipment Ground Lug
6 AWG–300 kcmil Al/Cu

Load Neutral Lug
4 AWG–300 kcmil Al/Cu

Meter Socket Accessories
Table 2.5:

Meter Socket Accessories
Accessory

EMT1225CB
Without Covers

Fifth-Jaw Kit
Closing Plates
(to seal hub openings)

Series A
Hubs
(listed by conduit size)
Series A-L

Series B
Adapter Plate

Lug Kits

Sealing Ring
i

© 2009 Schneider Electric
All Rights Reserved

Description
Cat. No.
Converts a 4-jaw meter socket to a 5-jaw meter socket.
A5J
For use on meter sockets supplied without lever bypass or jaw release only.
For Series A (steel)
ACP
For Series A (aluminum)
ACPA
For Series A-L (steel)
ACPL
For Series A-L (aluminum)
ACPLA
1.00 inch
A100
1.25 inch
A125
1.50 inch
A150
2.00 inch
A200
2.50 inch
A250
2.00 inch
A200L
2.50 inch
A250L
3.00 inch
A300L
3.50 inch
A350L
4.00 inch
A400L
3.00 inch
B300i
To allow the use of a Series A Hub on a device that is setup for a series A-L Hub.
AAP
For use on meter sockets supplied with Line, Load, and Neutral Studs only. Be sure
to order enough lugs for each device (a typical 1Ø device requires 6 lugs).
Includes one, two-barrel lug (6-250 kcmil)
ARP00118
Includes one, single barrel lug (4-600 kcmil)
ARP00129
Includes three, two-barrel lugs (6-350 kcmil)
ARP00427
Snap-on Aluminum (Standard)
2920910001
Snap-on Stainless Steel (Non-standard)
ARP00026
Screw Type Aluminum (Non-standard)
29008W

$ Price
14.90
13.40
11.90
18.30
16.50
33.90
33.90
33.90
47.90
61.00
83.00
87.00
111.00
114.00
119.00
186.00
33.80

38.10
55.00
135.00
8.00
16.70
20.10

DE1A Discount.

DE4

DE1A

Discount
Schedule

2-3

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Meter Sockets

Dimensions
Class 4131
www.schneider-electric.us

D

W

Hub
Opening

Meter
Socket

W

D

Solid
Top

W

Hub
Opening

Meter
Socket

H

H

E,F,G

S
A,B,C,D C,D,E,F A,B,C,D

S A

A

2R

W

Hub
Opening

Meter
Socket

D

3R, 6R
Hub
Opening

W

D

W

Hub
Opening

Meter
Socket

Meter
Socket
Offset

H

C,D,E,F,G
S

S

C,D,E,F,G

F,G,H

1R
D

H

D,E,F,G

A

H

F,G,H

A,B

A

S

A,B

S

2

D,E,F,G

A

F,G,H

F,G,H

4R, 5R

8R

7R
D

W

METERING EQUIPMENT

Hub
Opening

Meter
Socket

D

W

D

Hub
Opening

H

F,G,H

F,G,H,I

A,B

A

S

A

Enclosure Dimensions

Hub
Opening

F,G,H,I

9R

10R

Box
Hub Opening
H
W
D
No.
(Max. Conduit Size) a
1R
10.88
8.00
3.50
Series A
2R
13.00
13.00
4.94
Solid Top
3R
14.00
8.00
4.38
Series A
4R
14.00
11.00
4.38
Series A
5R
15.00
11.00
4.38
Series A
6R
15.50
8.00
4.36
Series A
7R
17.13
13.00
4.94
(2) Series A
8R
19.00
10.50
4.94
Series A-L
9R
19.00
13.00
4.94
Series A-L
10R
34.50
15.00
5.68
Series A-L
11R
36.62
15.00
5.68
Series A-L
12R
43.00
20.25
6.00
Series A-L
13R
14.12
24.31
4.50
Series A
13R1
14.12
32.50
4.50
Series A
14R
14.12
40.62
4.50
Series A
15R
14.12
48.75
4.50
Series A
16R
14.12
57.00
4.50
Series A
17R
14.12
24.31
5.38
Series A
18R
14.12
40.62
5.38
Series A-L
19R
14.12
54.75
5.38
(2) Series A-L
20R
14.12
63.00
5.38
(2) Series A-L
aRefer to page 2-3 for closing plates and hubs.

Table 2.7:
A

Knockout Information

H

F,G,H,I

H

S

F,G,H

D

W

Meter
Socket
Offset

Meter
Socket

A,B

Table 2.6:

Dimensions (Inches)

Meter
Socket
Offset

H

A,B,C,D,E

D

Knockouts
Symbol
S
Conduit 5/16
Size (in.) b

S

A

B

C

1/2

3/4

1

D

E

1-1/4 1-1/2

Hub
Opening

G,H,I,J

H

Main
Lugs
S

C,D,E,F,G
(13R, 17R)

12R

Meter
Socket

H

S

A

C,D,E,F,G (13R)
F,G,H (17R)

C,D,E,F,G
(13R, 17R)

C,D,E,F,G
(14R, 18R)

D
Main
Lugs

C,D,E,F,G (14R)
F,G,H (18R)

Meter Socket
Left position omitted on
5-Gang unit (15R)
W

C,D,E,F,G
(14R, 18R)

Hub Opening

H

A

Main
Lugs
S

C,D,E,F,G

H

A

14R and 18R

W

S

4

Main
Lugs

13R and 17R

Meter
Socket

J

3-1/2

Hub Opening

Hub Opening
D

I

3

W

D

W

Meter
Socket

A,B

H

2-1/2

11R

D

Meter
Socket

G

2

bKnockout for grounding conductor.

F,G,H,I

Hub Opening

W

F

C,D,E,F,G

H

A

C,D,E,F,G

13R1
C,D,E,F,G

7.50
191

22.44
570

Supplied with (2)
ACP Closing Plates.
Order A-Hubs
separately for
overhead service
feed.

C,D,E,F,G

15R and 16R

D

Meter Socket
Left position omitted on
5-Gang unit (19R)
W

Hub Opening (2 Locations)

Main
Lugs

30.00
762

C,D,E,F,G

S

C,D,E (3 Locations)

H

A

E,F,G,H (8 Locations)
C,D,E,F,G
(19R, 20R)

F,G,H
(19R, 20R)

C,D,E,F,G
(19R, 20R)

19R and 20R
A,B

EMT1225CB and EMT3225CB

2-4

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

MP Meter-PakTM Meter Centers

Ring and Ringless Devices
Class 4141

www.schneider-electric.us

Ring and Ringless Type Devices

•
•
•
•
•
•
•
•
•
•
•
•
•

MP44125

Main Bus
Ampacity
(A)

Cat. No.

2

Factory-Installed
Main Lug Ampacity
(See page 2-6 for
alternate lugs)
200

200

MP22125 b

977.00

3

300

300

MP33125 c

1187.00

4

400

400

MP44125 c

1730.00

5

500

MP55125 c

2079.00

6

400 Al
500 Cu
400 Al
500 Cu

600

MP66125 c

2415.00

2

400

400

MP42200 c

1274.00

No. of
Poles

125

Line Lug Wire
Size Al/Cu
AWG/kcmil

$ Price

3

400

400

MP43200 c

2151.00

4

400

600

MP64200 c

2814.00

5
600 Al, 750 Cu
800
MP85200 c
6
600 Al, 750 Cu
800
MP86200 c
For A and A-L Hubs see page 2-3, for B Hubs see page 3-9.
Meets EUSERC standards.
Meets EUSERC standards with addition of lug landing kit, MMSK2.

3377.00
4040.00

(1) 4–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(2) 3/0–500
(2) 3/0–500

200

a
b
c

Table 2.9:

200

No. Bypass
Cat. No.

$ Price

Horn
Bypass
Cat. No.

$ Price

Lever
Bypass
Cat. No.

QOM2-MM,
QOM2-MVH

$ Price

MPR22125

995.00

MPH22125

1002.00

—

—

3

300

300

MPR33125

1220.00

MPH33125

1253.00

—

—

4

400

400

MPR44125

1781.00

MPH44125

1830.00

—

—

5

500

MPR55125

2246.00

MPH55125

2330.00

—

—

600

MPR66125

2615.00

MPH66125

2715.00

—

—

2
3
4
2
3

400 Al
500 Cu
400 Al
500 Cu
400
400
400
350
400

400
400
600
350
500

MPR42200
MPR43200
MPR64200
—
—

1290.00
2186.00
2865.00
—
—

MPH42200
MPH43200
MPH64200
—
—

1299.00
2219.00
2916.00
—
—

4

400

600

—

6

QO,
QO-VH,
QOH

—

—

MPL32225
MPL53225

1739.00
2741.00

MPL64225

3656.00

—
—

—
—

225

200
d
e

Hub Prov.a

Semi-Flush
Flange Kit

Wt Lbs

Box No.

A/B300

MPSF12

46

1R

A-L

MPSF14

95

2R

A-L

MPSF14

97

2R

(4) A-L

MPSF16

130

3R

(4) A-L

MPSF16

132

3R

MPSF23

99

4R

MPSF23

99

4R

MPSF24

135

5R

MPSF26
MPSF26

173
173

6R
6R

(4) A-L

Ringless Type MP Meter-Pak Metering Equipment with 125 A (42 kAMaximum SCCR) or
200 A Type MPR, MPH (22 kA Maximum SCCR) or 225 A Type MPL (100 kA Maximum SCCR) Meter Socket Positions

Factory-Installed
Amperes No.
Main Lugs
Main Bus
Per of Pos.
Ampacity
Pos.
(See page 2-6 for Ampacity
alternate lugs)
2
200
200

125

Circuit
Breaker Type
(2P)

METERING EQUIPMENT

Amperes
per Pole

Ring Type MP Meter-Pak Metering Equipment with 125 A (42 kA Maximum SCCR) or
200 A (22 kA Maximum SCCR) Meter Socket Positions

2

Table 2.8:

Consult local utility for approval before installation.
120/240 Vac 1Ø3W.
Main lugs only—two to six meter sockets.
Enclosures are indoor/rainproof NEMA 3R construction.
Suitable only for use as service equipment.
Swingable mounting feet supplied at bottom of device.
Factory-installed mechanical lugs, alternate lugs and NEMA/EUSERC lug landing kits available.
Surface mount, convertible to semi-flush with field installed flange kit.
Ring type devices supplied with 4-jaw meter sockets (5th jaw kits available, order separately).
Ringless type devices supplied with 5-jaw meter sockets, available with and without horn or lever bypass.
Provisions for mounting 2-pole circuit breaker for each meter socket position (order circuit breakers separately).
Mounting channel supplied, except for box 1R (125 A, 2-position).
Combination overhead/underground feed.

—

—

—

5
600 Al, 750 Cu
800
MPR85200
3545.00 MPH85200
3627.00
6
600 Al, 750 Cu
800
MPR86200
4241.00 MPH86200
4341.00
For A and A-L Hubs see page 2-3, for B Hubs see page 3-9.
Requires use of EZM125QOA adapter (order separately). Refer to oage 2-15 for pricing.

Line Lug
Wire Size
Al/Cu
AWG/kcmil
(1) 4–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250
(1) 1/0–600 or
(2) 1/0–250

(1) 1/0–600 or
(2) 1/0–250
(2) 3/0–500
(2) 3/0–500

Circuit Breaker
Type
Hub
(2P)
Prov. d
(See page 2-6)
A/B300

QO,
QO-VH,
QOH

Semi-Flush
Flange Kit

Wt
Lbs

Box
No.

MPSF12

46

1R

MPSF14

95

2R

MPSF14

97

2R

MPSF16

130

3R

MPSF16

132

3R

MPSF23
MPSF23
MPSF24
N/A
N/A

99
99
135
105
147

4R
4R
5R
7R
8R

N/A

200

9R

MPSF26
MPSF26

173
173

6R
6R

A-L

(2) A-L

QOM2-MM,
QOM2-MVH
QBP-TM,
QDP-TM,
QGP-TM or (2) A-L
QJ-TM
QOe, QO-VHe
or QOHe
QOM2-MM,
QOM2-MVH

UL Listed short circuit current rating depends on lowest interrupting rating of circuit breaker installed.

© 2009 Schneider Electric
All Rights Reserved

DE4

Discount
Schedule

2-5

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

MP Meter-PakTM Meter Centers

Tenant Circuit Breakers and Accessories
Class 4141
www.schneider-electric.us

Tenant Circuit Breakers
UL Listed Short Circuit Current Rating depends on lowest interrupting rating of circuit breaker installed. (Refer to the
table on the bottom of page 2-9 for Square D certified ratings for downstream panelboards and load centers.)
Table 2.10:
Amperes

QO2100VH
2P, Plug-on Type
Circuit Breaker

2
QDP22200TM
2P, Bolt-on Type
Circuit Breaker

Tenant Circuit Breakers
10 k AIR
120/240 Vac

$ Price
(DE2A)

22 k AIR
120/240 Vac

$ Price
(DE2A)

For use in 125 A Max. Type MP, MPR and MPH Meter-Pak Metering Equipment
40
QO240
67.00
QO240VHa
146.00
50
QO250
67.00
QO250VHa
146.00
60
QO260
67.00
QO260VH
146.00
70
QO270
134.00
QO270VH
224.00
80
QO280
189.00
QO280VH
315.00
90
QO290
189.00
QO290VH
315.00
100
QO2100
189.00
QO2100VH
315.00
125
QO2125
428.00
QO2125VH
1034.00
For use in 200 A Max. Type MP, MPR and MPH Meter-Pak Metering Equipment
100
QOM2100MM
474.00
QOM2100MVH
1143.00
1143.00
125
QOM2125MM
474.00
QOM2125MVH
150
QOM2150MM
474.00
QOM2150MVH
1143.00
175
QOM2175MM
474.00
QOM2175MVH
1143.00
200
QOM2200MM
474.00
QOM2200MVH
1143.00
For use in 225 A MPL Lever Bypass Meter-Pak Metering Equipment

42 k AIR
120/240 Vac
QOH240
QOH250a
QOH260a
QOH270a
QOH280a
QOH290
QOH2100
QOH2125
—
—
—
—
—

METERING EQUIPMENT

10 k AIR
$ Price
25 k AIR
$ Price
65 k AIR
120/240 Vac
(DE2A)
120/240 Vac
(DE2A)
120/240 Vac
40
QO240b
67.00
QO240VHacb
146.00
QOH240bd
50
QO250b
67.00
QO250VHacb
146.00
QOH250bda
60
QO260b
67.00
QO260VHacb
146.00
QOH260bda
70
QBP22070TM
474.00
QDP22070TM
1143.00
QGP22070TM
80
QBP22080TM
474.00
QDP22080TM
1143.00
QGP22080TM
90
QBP22090TM
474.00
QDP22090TM
1143.00
QGP22090TM
100
QBP22100TM
474.00
QDP22100TM
1143.00
QGP22100TM
110
QBP22110TM
474.00
QDP22110TM
1143.00
QGP22110TM
125
QBP22125TM
474.00
QDP22125TM
1143.00
QGP22125TM
150
QBP22150TM
474.00
QDP22150TM
1143.00
QGP22150TM
175
QBP22175TM
474.00
QDP22175TM
1143.00
QGP22175TM
200
QBP22200TM
474.00
QDP22200TM
1143.00
QGP22200TM
225
QBP22225TM
474.00
QDP22225TM
1143.00
QGP22225TM
a
Order only. Not stocked in PDS. Order Point: Lincoln.
b
Requires use of EZM125QOA adapter (order separately). Refer to page 2-15 for pricing.
c
QO-VH tenant circuit breakers are rated 22 kAIR at 120/240 Vac.
d
QOH tenant circuit breakers are rated 42 k AIR at 120/240 Vac.

Amperes

$ Price
(DE2A)
317.00
317.00
317.00
528.00
651.00
651.00
651.00
1389.00
—
—
—
—
—
$ Price
(DE2A)
317.00
317.00
317.00
1521.00
1521.00
1521.00
1521.00
1521.00
1521.00
1521.00
1521.00
1521.00
1521.00

100 k AIR
120/240 Vac

$ Price
(DE2A)

—
—
—
—
—
—
—
—

—
—
—
—
—
—
—
—

—
—
—
—
—

—
—
—
—
—

100 k AIR
120/240 Vac
—
—
—
QJP22070TM
QJP22080TM
QJP22090TM
QJP22100TM
QJP22110TM
QJP22125TM
QJP22150TM
QJP22175TM
QJP22200TM
QJP22225TM

$ Price
(DE2A)
—
—
—
1890.00
1890.00
1890.00
1890.00
1890.00
1890.00
1890.00
1890.00
1890.00
1890.00

QOM2200MVH

Accessories
Table 2.11:

Accessories

Accessory

Description
Cat. No.
Fifth Jaw Kit
5J
For MPR and MPH only
MMHB
For Bolt-on Q2M tenant circuit breakers (40–125 A, 2P)
EZM125QOA
125 A Ring Style 2 Position Top Meter (Only)
MM125MBe
Slider Type Manual Circuit Closing:
125 and 200 A Ring Style
MM200MBe
Snap-on Aluminum
2920910001
Sealing Rings:
Screw Type Aluminum
29008W
Snap-on Type Stainless Steel
ARP00026
®
®
Meter Cover-Lexan
Meter Cover-Lexan
29007
(1) 1/0–600 AWG/kcmil or
MMLK250fg
(2) 1/0–250 AWG/kcmil per phase
Optional Lug Kits:
(2) 3/0–500 AWG/kcmil per phase
MMLK500g
(2) 2–600 AWG/kcmil per phase
MMLK600g
125 A 2 Position
MPSF12
125 A 3–4 Position
MPSF14
125 A 5–6 Position
MPSF16
Semiflush Kits:
200 A 2–3 Position
MPSF23
200 A 4 Position
MPSF24
200 A 5–6 Position
MPSF26
For 3 through 6 position 125 A and 200 A devices. Each pad rated 600 A maximum and
NEMA/EUSERC Lug Landing Kit:
MMSK2g
includes (2) 1/2-13 studs and mounting hardware.
For use ONLY on MPL43225, MPL53225 and MPL64225 with optional lugs. See wiring
NEMA Lug Landing Kit:
MMSK4
diagram of each device for optional lugs.
125 A 2 Position ONLY
MP43X8PED
125 A 3–6 Position
MP43X11PED
200 A 2–6 Position
MP43X11PED
MP Meter-Pak Wireway:
(Wall Mount Pedestal)
MPL32-225
MP35X11PEDh
MPL53-225
MP43X11PED
MPL64-225
MP35X11PEDh
Used ONLY with MP43X8PED
MP12X8PEDEXTh
MP Meter-Pak Wireway Extensions:
Used with MP43X11PED and MP35X11PED
MP12X11PEDEXTh
e
The meter center short circuit current rating is 10 kA when manual circuit closing is used. Not rated for continuous duty.
f
Standard lug for 3 through 6 position 125 A and 2 through 4 position 200 A devices.
g
Cannot be installed on 2 position 125 A device.
h
Order only. Not stocked in PDS. Order point: Lexington.
Fifth Jaw Kit
Horn Bypass Kit
QO Adapter

MMLK500

$ Price
18.30
16.70
273.00
171.00
171.00
8.00
20.10
16.70
10.10
150.00
200.00
233.00
101.00
134.00
218.00
144.00
171.00
255.00
185.00
276.00
441.00
504.00
504.00
504.00
504.00
504.00
102.00
126.00

For hubs and closing plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2-3

2-6

DE4

DE2A

Discount
Schedule

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

MP Meter-PakTM Meter Centers

Dimensions
Class 4141

www.schneider-electric.us

Dimensions and Knockouts
A-L Hub Opening Supplied
with ACPL Closing Plates

A-L Hub Opening Supplied
with ACPL Closing Plate

A Hub Opening Supplied
with ACP Closing Plate

7.28

7.28

185

7.28

185

185

36.46

24.34

12.28

Mounting Holes
(4) Locations
(Supplied without
Mounting Channel)

312

926

618

Top Position
Omitted on
3-Gang Unit

Top Left
Position
Omitted on
5-Gang Unit

37.50
953

9.00

9.00

229
Typ.

9.00

229
Typ.

229

48.12

42.37

1222

1076

18.50
470

11.19

C,D,F

284

C,D,F

11.19

C,D,F

284

C,D,F

C,D,F

A,B

A

E,F,G,H,I,J and
A-L Hub Provision

C,D,F

Box 1R

A

Box 3R
A,B

Box 2R

A-L Hub Opening Supplied
with ACPL Closing Plates

A-L Hub Opening Supplied
with ACPL Closing Plates

A-L Hub Opening Supplied
with ACPL Closing Plates

8.28

E,F,G,H,I,J and
A-L Hub Provision

METERING EQUIPMENT

D,F,G and A or
B300 Hub Provision

8.28

210

210

8.28
210

29.44

46.68

748

1186

29.44
748

Top Position
Omitted on
2-Gang Unit

Top Left
Position
Omitted on
5-Gang Unit

9.00
229
Typ.

9.00

9.00

229
Typ.

229
Typ.

43.41

2

43.41

1103

1103

52.00
1321

12.22

12.22

310

C,D,F

310

C,D,F

12.22

C,D,F

E,F,G,H,I,J and
A-L Hub Provision

E,F,G,H,I,J and A-L Hub Provision

310

C,D,E,F

C,D,E,F

Box 4R

E,F,G,H,I,J and
A-L Hub Provision

A,B

A,B,C

C,D,E,F

A-L Hub Opening Supplied
with ACPL Closing Plates

Box 5R

A-L Hub Opening Supplied
with ACPL Closing Plates

A,B

9.62
244

A-L Hub Opening Supplied
with ACPL Closing Plates

19.43

9.62
244

35.37

9.62

494

Box 6R

898

244

35.37
898

14.00
356

60.25

53.12

1530

67.37

1349

34.00

1711

14.00

864

14.00

356
Typ.

356
Typ.

C,D,E,F

13.43

C,D,E,F

341

C,D,E,F

13.43
341

E,F,G,H,I,J and
A-L Hub Provision

C,D,E,F

E,F,G,H,I,J and
A-L Hub Provision

C,D,E,F

Box 7R

E,F,G,H,I,J and
A-L Hub Provision

C,D,E,F

A,B
A,B

Box 8R

Box 9R

A,B

Knockouts
Symbol
Conduit Size
(in.)

© 2009 Schneider Electric
All Rights Reserved

A

B

C

1/2

3/4

1

D

E

1-1/4 1-1/2

F

G

H

I

J

2

2-1/2

3

3-1/2

4

2-7

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Indoor/Rainproof Meter Center Information
Class 4141
www.schneider-electric.us

NEMA 3R Construction

Branch Units

240 Vac Maximum, for use on AC systems, suitable for
use as Service Equipment.
Utility Company Requirements Review local utility
requirements to ensure that metering equipment meets
their standards.
EZ Meter-Pak meter center enclosures meet NEC wire
bending requirements, and are designed for wall mounting
only (not suitable for floor mounting). All unmetered
conductor compartments may be sealed by the utility
company.
EZ Meter-Pak meter centers have UL Listed short circuit
current ratings up to 100 kA at 240 Vac when properly
applied. For three-tier series ratings refer to Data Bulletin
4100DB0301 and Instruction Bulletin 80043-303-22.
Suitable incoming services for an EZM main device
and available outgoing feeder(s) to downstream
panelboards from EZM branch section(s)—

•

in ring type or ringless type construction and are supplied with
800 A continuous aluminum horizontal cross bus as standard
(Example: EZM314125). For optional 1200 A continuous
copper horizontal cross bus with aluminum vertical
connectors, add suffix “X” to catalog number (Example:
EZM314125X). For optional 1200 A continuous all-copper
bussing, add suffix “CUX” to catalog number (Example:
EZM314125CUX). NOTE: 5-gang 225 A EZM, EZMR and
EZMH residential branch units are supplied with 1200 A
continuous Cross Bus as standard, do not add suffix “X” or
“CUX” to these units (Examples: EZMR315225 or
EZMR315225CU). Plug-in style residential meter sockets are
available as ring type EZM without bypass, ringless type
EZMR without bypass, and ringless type EZMH with horn
bypass.

Incoming Service to Main Device 120/240 Vac, 1Ø3W

2

Available outgoing feeder(s) to downstream panelboards:

•

120/240 Vac, 1Ø3W
(4-jaw ring type meter sockets, two-pole circuit breakers)
(5-jaw ringless meter sockets, two-pole circuit breakers).

METERING EQUIPMENT

Incoming Service to Main Device 240/120 Vac, 3Ø4W
Delta

•

Available outgoing feeder(s) to downstream panelboards:

•

•

120/240 Vac, 1Ø3W (Fed from transformer’s “A-Phase” and
“C-Phase” only.) NOTE: Connection to High-Leg “B-Phase”
not permitted for this service
(4-jaw ring type meter sockets, two-pole circuit breakers)
(5-jaw ringless meter sockets, two-pole circuit breakers)
Standard 3Ø IN/1Ø OUT branch units are not suitable for
use on this Delta System. Special branch units are
available for this System by adding suffix: “CA” to catalog
number (Typical Examples: EZM313125CA,
EZM313125XCA, EZM313125CUXCA, EZM314225CA,
EZM314225XCA, EZM314225CUXCA, EZM315225CA,
EZM314225CUCA, etc.).
240/120 Vac, 3Ø4W Delta (7-jaw meter sockets, three-pole
circuit breakers).

Incoming Service to Main Device 208Y/120 Vac, 3Ø4W
Available outgoing feeder(s) to downstream panelboards:

•
•

120/208 Vac, 1Ø3W (5-jaw meter sockets, two-pole circuit
breakers)
208Y/120 Vac, 3Ø4W (7-jaw meter sockets, three-pole circuit
breakers).

•
•

Note: QO, QO-VH and QO-H tenant circuit breakers used
in 225 A branch units require the use of adapter
EZM125QOA (purchased separately). Refer to page 2-15
for pricing.
• 400 A branch units are available in ringless type

•

mounted.

•
•

2000 A main disconnect must be center mounted and
requires use of branch units having 1200 A continuous
horizontal cross bus.
400, 800 and 1200 A Type EZM-TBU tap boxes supplied with
lug landings to meet EUSERC requirements.

Main Circuit Breaker ratings: 400, 600, 800, 1000, 1200,
1600 and 2000 A
Main Fusible Switch ratings: 400, 600, 800, and 1200 A
(1Ø3W only)
Main Lugs Terminal Box ratings:
225, 400, 600, 800, 1200, 1600, and 2000 A

2-8

Tenant circuit breakers must be ordered separately for these
branch units. 125 A max. units make use of Type QO, QO-VH
or QO-H two-pole tenant circuit breakers (40–125 A). 225 A
max. units make use of Type QDP-TM, QBP-TM, QGP-TM
and QJP-TM two-pole tenant circuit breakers (70–225 A), and
may also make use of two-pole Type QO (40–125 A at 10 kA
max.), two-pole Type QO-VH (40–60 A at 100 kA max.), or
two-pole Type QO-H (40–60 A at 100 kA max.) tenant circuit
breakers.
225 A commercial branch units are available in ring type
or ringless type construction and are supplied with 1200 A
copper horizontal cross bus with aluminum vertical
connectors as standard (Example: EZML314225). For
optional 1200 A continuous all-copper bussing, add suffix
“CU” to catalog number (Example: EZML314225CU). Plugin style commercial meter sockets are available as ring type
EZMT with test block bypass (meets EUSERC
requirements), ringless type EZMR without bypass, and
ringless type EZML with lever bypass.
225 A max. units make use of type QDP-TM, QBP-TM, QGPTM and QJP-TM two-pole or three-pole tenant circuit breakers
(70– 225 A), and may also make use of two-pole type QO
(40–125 A at 10 kA max.), two-pole type QO-VH (40–60 A at
100 kA max.), or two-pole type QO-H (40–60 A at 100 kA
max.) tenant circuit breakers.

Main Devices
• 400, 600 and 800 A main disconnects may be end mounted
with branch units having 800 A or 1200 A continuous
horizontal cross bus.
1000 and 1200 A main disconnect or terminal box must be
center mounted when used with branch devices with main
bus rated 800 A continuous.
1600 A main disconnect or terminal box must be center

125 A and 225 A residential branch units are available

•

construction only, and are supplied with 1200 A continuous
all-copper bussing as standard (Example: EZML332400).
These branch units are supplied with factory-installed type
DJM tenant circuit breakers that have a field adjustable
ampere rating trip setting from 160 A min. to 400 A max.
A tamper-evident seal kit is available where needed, order
seal kit 29375 (refer to NEC 240-6 [c]). 400 A branch units
are available as Type EZML with plug-in style lever bypass
type meter sockets, or Type EZMK with bolt-on style with
manual bypass type meter sockets.
Units having 800 A continuous horizontal cross bus
WILL CONNECT with units having 1200 A continuous
horizontal cross bus.
Single phase units (three bus bars in horizontal cross bus)
WILL NOT CONNECT with three phase units (four bus
bars in horizontal cross bus).

For Load Center Three-Tiered Series Ratings used
downstream from Metering Equipment, refer to Data
Bulletins : 4100DB0301 and 2700DB9901.

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Selection Information
Class 4141

www.schneider-electric.us

•
•

Review local utility requirements to ensure that metering
equipment meets their standards.
Check local utility to determine available fault current at the
meter center.

•

Using the SCCR table:
—

—
—
—

Table 2.12:

Select meter center configuration, main lugs only (Six
Disconnect Rule), or remote main, main circuit breaker, or
main fusible switch.
Read down to select SCCR equal to, or greater than desired
rating.
Read across to select branch unit tenant circuit breaker type.
Continue reading across to select EZM main device type.

UL Listed Meter Center Short Circuit Current Ratings (SCCR)

Tenant circuit breakers of same frame size having higher AIR values may replace tenant circuit breakers as listed in tables below and maintain the series rating.
EZM Meter Center Overcurrent Protection Devices
Short Circuit
EZM Branch Unit Tenant Circuit Breaker
Current Rating
EZM Main Device with Integral Mounted Main,
Types Available (Branch Unit Amperes max.,
(240 Vac
Remote Mounted Main or without an Upstream Mounted Main
Number of Poles, Tenant Circuit Breaker
Maximum)ab
(Six Disconnect Rule)
Amperes Rating Range)

Figures

EZM Branch Units

Load
Centers
(Main Lugs)

Service
Disconnects
(6 Max.)
T ransformer

EZM Main Lugs
Terminal Box

Figure 1

EZ Meter-Pak (Six Disconnect Rule Applications)—See Figure 1
QO (125 A, 2P, 40–125 A)
10 kA
QO (225 A, 2P, 40–125 A)d
QB (225 A, 2P or 3P, 70–225 A)
QO-VH (125 A, 2P, 40–125 A )
22 kA
QO-VH (225 A, 2P, 40–60 A)d
400–2000 A Main Lugs Terminal Box
25 kA
QD (225 A, 2P or 3P, 70–225 A)
(Tenant Circuit Breakers used as Service Disconnects—6 maximum)
QOH (125 A, 2P, 40–125 A)
42 kA
QOH (225 A, 2P, 40–60 A)d
65 kA

QG (225 A, 2P or 3P, 70–225 A)
QJ (225 A, 2P or 3P, 70–225 A) c
DJM (400 A, 2P or 3P, 160–400 A)ec
EZ Meter-Pak 225–2000 A Main Lugs Terminal Box Applications Protected by Remote Main—See Figure 2
QO (125 A, 2P, 40–125 A)
QO (225 A, 2P, 40–125 A)d
10 kA
Must be protected by an upstream disconnecting means rated 10 k AIR minimum
QB (225 A 2P or 3P, 70–225 A)
DJM (400 A, 2P or 3P 160–400 A)e
QO-VH (125 A, 2P, 40–125 A)
22 kA
QO-VH (225 A, 2P, 40–60 A)d
Must be protected by an upstream disconnecting means rated 22 k AIR minimum
DJM (400 A, 2P or 3P, 160–400 A)e
QD
(225
A
2P
or
3P,
70–225
A)
25 kA
Must be protected by an upstream disconnecting means rated 25 k AIR minimum
DJM (400 A, 2P or 3P, 160–400 A)e
QOH (125 A, 2P, 40–125 A)
QOH (225 A, 2P, 40–60 A)d
Must be protected by an upstream disconnecting means rated 42 k AIR minimum
DJM (400 A, 2P or 3P, 160–400 A)e
42 kA
QO-VH (125 A, 2P, 40–125 A)
Must be protected by a Square D circuit breaker Type LA (400 A max.) or MA
QO-VH (225 A, 2P, 40–60 A)d
(1000 A max.) Rated 42 k AIR minimum
QD (225 A 2P or 3P, 70–225 A)

EZM Branch Units

Transformer

Tenant
Circuit
Breakers

Load
Centers
(Main Lugs)

Upstream Disconnection
Means and Overcurrent
Protection as required

65 kA

Figure 2

EZM Branch Units

Transformer
Tenant
Circuit
Breakers

QD (225 A 2P or 3P, 70–225 A)

Must be protected by a Square D circuit breaker Type MG (800 A max.), PG (1200 A max.) or
RG (2000 A max.) rated 65 k AIR minimum

QJ (225 A 2P or 3P, 70–225 A )c
DJM (400 A 2P or 3P, 160–400 A)ec
QO-VH (125 A, 2P, 40–125 A)
QO-VH (225 A, 2P, 40–60 A)d
QD (225 A 2P only, 70–225 A)

Must be protected by an upstream disconnecting means rated 100 k AIR minimum

Must be protected by a Square D circuit breaker Type LH (400 A max.), MH (1000 A max.)
or PA (1600 A max.) rated 65 k AIR minimum

QO-VH (125 A, 2P, 40–125 A)
QO-VH (225 A, 2P, 40–60 A)d
1200 A EZM Main Device (1Ø only) with Class T (300 Vac) fuses installed.
DJM (400 A, 2P, 160–400 A)e
100 kA
QD (225 A 2P, 70–225 A)
QO-VH (125 A, 2P, 40–125 A)
QO-VH (225 A, 2P, 40–60 A)d
100 kA
QD (225 A 2P, only, 70–225 A)
400–800 A EZM Main Device (1Ø or 3Ø) with Class T (300 Vac) fuses installed.
QD (225 A 3P only, 70–225 A)c
DJM (400 A, 2P or 3P, 160–400 A)ec
Meter center short circuit current rating is equal to the lowest short circuit current rating given in table for any circuit breaker installed in any meter panelboard in the meter center.
Short circuit current rating is measured at the LINE SIDE terminals of the integral mounted or remote mounted main providing overcurrent protection for the EZM metering equipment lineup.
3P only tenant circuit breaker(s) are limited to: 100 kA Max. at 208Y/120 Vac or 65 kA Max at 240/120 Vac.
Requires use of EZM125QOA adapter (order separately). Refer to page 2-15 for pricing.
Supplied with factory-installed circuit breaker(s), with an adjustable trip range of 160–400 A.
Figure 3

a
b
c
d
e

Load
Centers
(Main Lugs)

Must be protected by an upstream disconnecting means rated 65 k AIR minimum

Must be protected by an upstream disconnection means with Class R (600 A max.), or
Class T (300 Vac, 800 A maximum) fuses.
Must be protected by an upstream disconnection means with Class J (600 A max.), Class L
(1200 A max.), Class R (600 A max.), Class T (300 Vac, 1200 A max.) or Class T (600 Vac,
800 A maximum) fuses, or be protected by a Square D circuit breaker Type MJ (800 A max.),
QD (225 A 3P only, 70–225 A)c
PJ (1200 A max.), PH (1600 A max.) or RJ (2000 A max.) rated 100 k AIR minimum.
EZ Meter-Pak—Main Circuit Breaker Applications—See Figure 3
QO (125 A, 2P, 40–125 A)
10 kA
QO (225 A, 2P, 40–125 A)d
QB (225 A 2P or 3P, 70–225 A)
400–1600 A EZM Main Device with Type LH (400 A Max.), MH (1000 A max.) or PA (1600 A
QO-VH (125 A, 2P, 40–125 A)
max.) circuit breaker.
QO-VH (225 A, 2P, 40–60 A)d
65 kA
QD (225 A 2P or 3P, 70–225 A)
DJM (400 A, 2P or 3P, 160–400 A)e
QO-VH (125 A, 2P, 40–125 A)
QO-VH (225 A, 2P, 40–60 A)d
1000–1200 A Main Device with catalog number suffix "CBU" supplied with
QD (225 A 2P only, 70–225 A)
Type MHF circuit breaker.
QD (225 A 3P only, 70–225 A)c
100 kA
DJM (400 A, 2P or 3P, 160–400 A)ec
QD (225 A 2P only, 70–225 A)
QD (225 A 3P only, 70–225 A)c
2000 A EZM Main Device with Type RJ (2000 A) circuit breaker
DJM (400 A 2P or 3P, 160–400 A)ec
EZ Meter-Pak—Main Fusible Switch Applications—See Figure 3
QO (125 A, 2P, 40–125 A)
400–800 A EZM Main Device (1Ø or 3Ø) with Class T (300 Vac) fuses installed. 1200 A EZM
10 kA
QO (225 A, 2P, 40–125 A)d
Main Device (1Ø only) with Class T (300 Vac) fuses installed.
QB (225 A 2P or 3P, 70–225 A)
100 kA

EZM Circuit Breaker Main
or EZM Main Fusible Switch

QG (225 A 2P or 3P, 70–225 A)
DJM (400 A, 2P or 3P, 160–400 A)e
QO-VH (125 A, 2P, 40–125 A)
QO-VH (225 A, 2P, 40–60 A)d
QD (225 A 2P or 3P, 70–225 A)

2

EZM Main Lugs Terminal Box

METERING EQUIPMENT

100 kA

42 kA

For three-tier series ratings refer to Data Bulletin 4100DB0301 and Instruction Bulletin 80043-303-22.

© 2009 Schneider Electric
All Rights Reserved

2-9

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers
Indoor/Rainproof Meter Centers
Class 4161
1Ø 3W EZ Meter-Pak Meter Centers—1Ø, Indoor/Rainproof, UL Listed
www.schneider-electric.us

Select EZM meter center short circuit current rating from Table 2.12 on page 2-9. Using this table as a reference, make
the following selections:
1.
2.
3.
4.
5.

Select EZM 1Ø main device from Table 2.13 or 2.14, below, with an equal or higher short circuit rating than the application.
Select EZM 1Ø branch units from Tables 2.15, 2.16 or 2.17.
Select proper 2P type QO, QO-VH, QOH, QBP-TM, QDP-TM, QGP-TM or QJP-TM branch circuit breakers for use as tenant mains
in branch unit from Table 2.24, page 2-15.
Select accessories as required from Table 2.25, page 2-15.
Dimensions; page 2-16.

Select Main Devices—NEMA 3R Construction
Table 2.13:
System
Type

2
EZM1800CB
METERING EQUIPMENT

System
Type

2-10

Ampere
Rating

Horizontal Cross Bus
Rating and Bus Bar
Material

Cat. No.

Width

$ Price

Main Circuit Breaker (1Ø Incoming and 1Ø Outgoing)
65 kA Short Circuit Current Rating (400–1600 A Max.), 100 kA Short Circuit Current Rating (2000 A Max.)
400
400 A Al
EZM1400CBa
18.66
6180.00
600
600 A Al
EZM1600CBa
18.66
8573.00
800
800 A Al
EZM1800CBa
18.66
11364.00
1Ø3W
120/240 Vac
1000
1000 A Al
EZM11000CBa
18.66
15767.00
1200
1200 A Al/Cu
EZM11200CBbc
30.19
20366.00
1600
1200 A Al/Cu
EZM11600CBbc
30.19
29904.00
2000
1200 A Al/Cu
EZM12000CBc
30.19
54518.00
Main Fusible Switches (1Ø Incoming and 1Ø Outgoing)
100 kA Short Circuit Current Rating. Requires 300 Vac Class T Fuses (Order Separately)
400
400 A Al
EZM1400FS
18.66
3989.00
600
600 A Al
EZM1600FS
18.66
6978.00
1Ø3W
120/240 Vac
800
800 A Al
EZM1800FS
18.66
8972.00
1200
1200 A Al/Cu
EZM11200FSc
30.19
11564.00
Main Lugs Terminal Boxes (1Ø Incoming and 1Ø Outgoing)
225
800 A Al
EZM1225TBd
11.50
798.00
400
800 A Al
EZM1400TBh
17.00
915.00
600
800 A Al
EZM1600TBh
17.00
998.00
1Ø3W
800
800 A Al
EZM1800TBh
18.66
1236.00
120/240 Vac
800
800 A Cu
EZM1800TBCUih
23.93
1658.00
1600
1200 A Al
EZM11600TBcih
22.33
3588.00
New!
2000
1200 A Cu
EZM12000TBh
30.19
9600.00

Table 2.14:

EZM1800CBU

Main Devices, Overhead/Underground Feed
Line Side Lug (Factory-Installed)
(Conductors per Phase and Neutral) Wire
Size
(AWG/kcmil)

(1) 1–600 or (2) 1–250
(3) 3/0–500
(3) 3/0–500
(3) 3/0–500
(4) 1/0–750
(6) 1/0–750
(6) 1/0–750 or (12) 1/0–250

(1) 1–600 or (2) 1–250
(3) 3/0–500
(3) 3/0–500
(4) 1/0–750
(1) 4–300
(2) 3/0–500
(2) 1/0–750 or (4) 1/0–300
(4) 3/0–500
(4) 3/0–500
(6) 3/0–600
6 (Order Lugs Separately)

Main Devices, Underground Feed Only
Ampere
Rating

Horizontal Cross Bus
Rating and Bus Bar
Material

Cat. No.
Meets EUSERC
Requirements

Width

$ Price

Factory-Installed Lug Landings
for use with Crimp-Type Lugs
(2-Hole Mounting)
Qty. per Phase and Neutral e

Main Circuit Breakers (1Ø Incoming and 1Ø Outgoing)e
65 kA Short Circuit Current Rating (400–800 and 1600 A Max.),
100 kA Short Circuit Current Rating (1000, 1200 and 2000 A Max.)
400
400 A Al
EZM1400CBUa
20.46
6380.00
1 (Order Lugs Separately)
600
600 A Al
EZM1600CBUa
20.46
9171.00
2 (Order Lugs Separately)
800
800 A Al
EZM1800CBUa
20.46
11762.00
2 (Order Lugs Separately)
1Ø3W
120/240 Vac
1000
1000 A Al/Cu
EZM11000CBUfc
34.19
16547.00
3 (Order Lugs Separately)
1200
1200 A Al/Cu
EZM11200CBUfc
34.19
21332.00
3 (Order Lugs Separately)
1600
1200 A Al/Cu
EZM11600CBUbcg
27.69
31658.00
6 (Order Lugs Separately)
New!
2000
1200 A Al/Cu
EZM12000CBUfgc
30.19
52755.00
6 (Order Lugs Separately)
Main Fusible Switches (1Ø Incoming and 1Ø Outgoing)e
100, kA Short Circuit Current Rating. Requires 300 Vac Class T Fuses (Order Separately)
400
400 A Al
EZM1400FSU
20.46
6180.00
1 (Order Lugs Separately)
600
600 A Al
EZM1600FSU
20.46
9369.00
2 (Order Lugs Separately)
1Ø3W
120/240 Vac
800
800 A Al
EZM1800FSU
20.46
11564.00
2 (Order Lugs Separately)
1200
1200 A Al/Cu
EZM11200FSUc
34.19
14154.00
3 (Order Lugs Separately)
Main Lugs Terminal Boxes (1Ø Incoming and 1Ø Outgoing) e
400
800 A Al
EZM1400TBUh
16.16
1544.00
1 (Order Lugs Separately)
1Ø3W
800
800 A Al
EZM1800TBUh
24.16
1827.00
2 (Order Lugs Separately)
120/240 Vac
1200
1200 A Al/Cu
EZM11200TBUch
32.16
3725.00
3 (Order Lugs Separately)
a
Available by special order with main circuit breaker supplied with other standard ampere ratings, consult local Field Office (allow 6 weeks for delivery).
b
Ampere rating of the PA circuit breaker supplied with this main changed to a LOWER value in the field by ordering a different set of rating columns, refer
to Supplementary Digest, Section 3 for listing.
c
Supplied with copper horizontal bus bars and aluminum vertical bus bars.
d
225 A tap box supplied with isolated neutral that cannot be bonded.
e
For mechanical lugs (3/0 AWG–600 kcmil) order kit CMELK4, Price $91.00. Kit includes 4 lugs only. Multiple kits may be required, consult factory. For
crimp-type lugs refer to Anderson Electrical Connector Products Catalog AEC-40R.
f
Has a 100 kA max. short circuit current rating.
g
Does not meet EUSERC Standards.
h
Tap box is suitable for use on LINE or LOAD side of service equipment. Supplied with isolated neutral and provided with neutral bonding kit for use as
required. Refer to page 2-9 for appropriate short circuit current ratings.
i
Feed-thru lug kit available, see Accessories, page 2-15.

DE4

Discount
Schedule

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Branch Devices
Class 4161

www.schneider-electric.us

Branch Devices—NEMA 3R Construction
Branch Units—1Ø Incoming and 1Ø Outgoing

EZMH114125

Width
(in.)

Ring Type
4-Jaw Meter Socketm
without Bypassa

Number Horizontal Cross
of Meter Bus Rating and
Sockets Bus Bar Material

Cat. No.

$ Price

Cat. No.

$ Price

Ringless Type
5-Jaw Meter Socket
with Horn Bypass
Cat. No.

$ Price

125 A Maximum (Order Type QO, QO-VH or QOH Circuit Breakers Separately) b
800 A Al
EZM113125c
1436.00
EZMR113125c
1436.00
EZMH113125c
1755.00
3
1200 A Cu
EZM113125CUX
2282.00 EZMR113125CUX
2282.00 EZMH113125CUX 2282.00
800 A Al
EZM114125c
1914.00
EZMR114125c
1914.00
EZMH114125c
2153.00
1Ø3W
4
1200 A Cu
EZM114125CUX
3043.00 EZMR114125CUX
3043.00 EZMH114125CUX 3043.00
120/240 Vac
12.25
2P Branch
800 A Al
EZM115125c
2354.00
EZMR115125c
2354.00
EZMH115125c
2910.00
5
Circuit Breakers
1200 A Cu
EZM115125CUX
3742.00 EZMR115125CUX
3742.00 EZMH115125CUX 3742.00
800 A Al
EZM116125c
2792.00
EZMR116125c
2792.00
EZMH116125c
3549.00
6
1200 A Cu
EZM116125CUX
4438.00 EZMR116125CUX
4438.00 EZMH116125CUX 4438.00
225 A Maximum Branch Units (Order Type QBP-TM, QDP-TM, QGP-TM or QJP-TM Circuit Breakers Separately) d
800 A Al
EZM112225c
2273.00
EZMR112225c
2273.00
EZMH112225c
2474.00
2
1200 A Cu
EZM112225CUX
3615.00 EZMR112225CUX
3615.00 EZMH112225CUX 3615.00
800 A Al
EZM113225c
2792.00
EZMR113225c
2792.00
EZMH113225c
3069.00
1Ø3W
3
1200 A Cu
EZM113225CUX
4438.00 EZMR113225CUX
4438.00 EZMH113225CUX 4438.00
120/240 Vac
17.38
2P Branch
800 A Al
EZM114225c
3588.00
EZMR114225c
3588.00
EZMH114225c
4028.00
4
Circuit Breakers
1200 A Cu
EZM114225CUX
5705.00 EZMR114225CUX
5705.00 EZMH114225CUX 5705.00
1200 A Al/Cu
EZM115225
4715.00
EZMR115225
4715.00
EZMH115225
4715.00
5
1200 A Cu
EZM115225CU
7090.00 EZMR115225CU
7090.00 EZMH115225CU
7090.00
a
Snap-on aluminum sealing rings supplied as standard.
b
Supplied with removable drip hood and equipped with an indoor top endwall with knockouts provided.
c
For 1200 A main cross bus add suffix “X” to catalog number (Example: EZM314125X). Add 3% adder to list per device. Allow 6 weeks for delivery.
d
Type QO, QO-VH and QOH branch circuit breakers (40–60 A) may be installed with use of EZM125QOA adapter kits, refer to page 2-15.

Table 2.16:

Branch Units—225 A Maximum Commercial
(Order Type QBP-TM, QDP-TM, QGP-TM or QJP-TM Circuit Breakers Separately, see page 2-15)e
Number
of Meter
Sockets

System
Type

EZML113225
e
f
g
h
i

Ringless Type 5-Jaw Meter Socket
with Lever Bypass and Jaw Releasef

Horizontal Cross Bus
Ratingand Bus Bar
Material

Cat. No.

Number
of Meter
Sockets

Main
Cross Bus
Rating
and Bus Bar
Material

Ringless Type 5-Jaw Meter Socket
with Lever Bypass and Jaw Release.
Includes Factory-Installed 400 A Type DJM
Circuit Breaker jk

EZMT111225
1Ø3W
120/240 Vac
2P Branch
Circuit Breakers

k

$ Price

Cat. No.

Branch Units—400 A Maximum Commercial

System
Type

j

Width
(in.)

Ring Type 5-Jaw Meter Socket
with Test Block Bypass.
Meets EUSERC Requirements

Width
$ Price
(in.)
1200 A Al/Cu
EZML111225
2453.00
EZMT111225g
22.42
3387.00
1
1200 A Cu
EZML111225CU
19.44
3901.00
—
—
—
1200 A Al/Cu
EZML111225Dh
2576.00
—
—
—
1200 A Al/Cu
EZML112225
4466.00
EZMT112225g
22.42
6143.00
2
1200 A Cu
EZML112225CU
19.44
7101.00
—
—
—
1Ø3W
1200 A Al/Cu
EZML112225Dh
4689.00
—
—
—
120/240 Vac
2P Branch
1200 A Al/Cu
EZML113225
6579.00
EZMT113225gi
22.42
9215.00
Circuit Breakers
3
1200 A Cu
EZML113225CU
19.44
10461.00
—
—
—
1200 A Al/Cu
EZML113225Dh
6908.00
—
—
—
1200 A Al/Cu
EZML114225
8813.00
—
—
—
4
1200 A Cu
EZML114225CU
19.44
14013.00
—
—
—
1200 A Al/Cu
EZML114225Dh
9254.00
—
—
—
2P Type QO (40–125 A, 10 kA max. meter center SCCR) or QO-VH and QO-H (40–60 A, 100 kA max. meter center SCCR) may be installed using
EZM125QOA adapter kit, refer to page 2-15.
Supplied with Class 320 lever bypass meter socket. Utilizes anti-inversion clip kit, catalog number MMLRK, if required, refer to page 2-15.
Supplied with bondable neutral, suitable for use as service equipment. Use main lugs tapbox type EZM-TBU for Six Disconnect Rule applications to feed
this device. Supplied with copper horizontal bus bars and aluminum vertical bus bars.
Supplied with removable drip hood and equipped with an indoor top endwall with knockouts provided.
Does not meet EUSERC 48 in. minImum / 75 in. maximum meter height requirements for outdoor installations. The bottom meter socket is 37 inches above
ground when the device is mounted with the top meter socket at 75 inches above ground. EUSERC indoor requirements are 36 in. minimum / 75 in. maximum.

Table 2.17:

© 2009 Schneider Electric
All Rights Reserved

Ringless Type
5-Jaw Meter Socket
without Bypass

METERING EQUIPMENT

System
Type

2

Table 2.15:

Cat. No.

Width
(in.)

$ Price

Ringless Type K Bolt-on
4-Jaw Meter Socket with Manual Bypass.
Includes Factory-Installed 400 A Type DJM
Circuit Breaker j
Cat. No.

Width
(in.)

$ Price

1

1200 A Cu

EZML111400

23.21

5981.00

EZMK111400

27.56

7424.00

2

1200 A Cu

EZML112400

23.21

11963.00

EZMK112400

27.56

14531.00

DJM circuit breaker has adjustable trip settings from 160–400 A. Use seal kit 29375, if required. DJM circuit breaker terminal lug kit 32508 factoryinstalled and accomodates (1) 2 AWG–500 kcmil Al or (1) 2 AWG–600 kcmil Cu per phase. Alternate lug kit 32510 for DJM circuit breaker is available,
see Accessories, page 2-15. Additional field-installed DJ circuit breaker accessories are available, see page 7-35.
Supplied with Class 320 lever bypass meter socket. Utilizes anti-inversion clip kit MMLRK, if required, refer to page 2-15.

DE4

Discount
Schedule

2-11

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Main Devices
Class 4162
www.schneider-electric.us

3Ø4W EZ Meter-Pak Meter Centers—3Ø Indoor/Rainproof, UL Listed
Select EZM meter center short circuit current rating from Table 2.12 on page 2-9. Using this table as a reference, make
the following selections:
1.
2.
3.
4.
5.

Select 3Ø EZM main device below with an equal or higher short circuit rating than the application from Tables 2.18 and 2.19.
Select EZM 3Ø branch units from Tables 2.20, 2.21 and 2.22.
Select proper 2P type QO, QO-VH, QOH, QBP-TM, QDP-TM, QGP-TM or QJP-TM or 3P QBP-TM, QDP-TM, QGP-TM or QJP-TM
branch circuit breakers for use as tenant mains in branch unit; from Table 2.24.
Select accessories as required, from Table 2.25.
Dimensions, page 2-16.

Main Devices—NEMA 3R Construction
Table 2.18:

Main Device, Overhead/Underground Feed
Cross Bus
Ampere Horizontal
and Bus Bar
Rating RatingMaterial

System
Type

Cat. No.

Width
(in.)

$ Price

2

Main Circuit Breakers (3Ø Incoming and 3Ø Outgoing)
65 kA Short Circuit Current Rating (400–1600 A Max.), 100 kA Short Circuit Current Rating (2000 A Max.)
400
400 A Al
EZM3400CBa
18.66
6620.00
600
600 A Al
EZM3600CBa
18.66
10247.00
800
800 A Al
EZM3800CBa
18.66
13650.00
3Ø4W 208Y/120 Vac
or
1000
1000 A Al
EZM31000CBa
18.66
17027.00
240/120 Vac Delta
1200
1200 A Al/Cu
EZM31200CBbc
30.19
23127.00
1600
1200 A Al/Cu
EZM31600CBbc
30.19
35288.00
2000
1200 A Al/Cu
EZM32000CBc
30.19
57518.00
Main Fusible Switches (3Ø Incoming and 3Ø Outgoing)
100 kA Short Circuit Current Rating, Requires 300 Vac Class T Fuses (Order Separately)
400
400 A Al
EZM3400FS
18.66
4466.00
3Ø4W 208Y/120 Vac
or
600
600 A Al
EZM3600FS
18.66
8373.00
240/120 Vac Delta
800
800 A Al
EZM3800FS
18.66
11565.00

METERING EQUIPMENT

Main Lugs Terminal Boxes (3Ø Incoming and 3Ø Outgoing)
225
800 A Al
3Ø4W 208Y/120 Vac
or
400
800 A Al
240/120 Vac Delta
600
800 A Al
800
800 A Al
800
800 A Cu
1600
1200 A Al/Cu
New!
2000
1200 A Cu

EZM3600FS

Table 2.19:

Cross Bus
Ampere Horizontal
and Bus Bar
Rating RatingMaterial

Cat. No.
Meets EUSERC
Requirements

Main Circuit Breakers (3Ø Incoming and 3Ø Outgoing)e
65 kAShort Circuit Current Rating (400–800 and 1600 A Max.),
100 kA Short Circuit Current Rating (1000, 1200 and 2000 A Max.)
400
400 A Al
EZM3400CBUa
600
600 A Al
EZM3600CBUa
3Ø4W 208Y/120 Vac
800
800 A Al
EZM3800CBUa
or
1000
1000 A Al/Cu
EZM31000CBUcf
240/120 Vac Delta
1200
1200 A Al/Cu
EZM31200CBUcf
1600
1200 A Al/Cu
EZM31600CBUbcg
New!
2000
1200 A Al/Cu
EZM32000CBUcg
Main Fusible Switches (3Ø Incoming and 3Ø Outgoing)e
Requires 300 Vac Class T Fuses (Order Separately)

EZM31600CB

3Ø4W
208Y/120 Vac
or
240/120 Vac
Delta

a
b
c
d
e
f
g
h
i

(1) 1–600 or (2) 1–250
(3) 3/0–500
(3) 3/0–500
(3) 3/0–500
(4) 1/0–750
(6) 1/0–750
(6) 1/0–750 or (12) 1/0–250

(1) 1–600 or (2 )1–250
(3) 3/0–500
(3) 3/0–500

11.50
17.00
17.00
18.66
23.93
22.33
30.19

1013.00
1113.00
1196.00
1442.00
3545.00
4028.00
11820.00

(1) 4–300
(2) 3/0–500
(2) 1/0–750 or (4) 1/0–300
(4) 3/0–500
(4) 3/0–500
(6) 3/0–600
6 (Order Lugs Separately)

Width

$ Price

20.46
20.46
20.46
34.19
34.19
27.69
30.19

7178.00
10806.00
14115.00
17943.00
24323.00
37170.00
57255.00

1 (Order Lugs Separately)
2 (Order Lugs Separately)
2 (Order Lugs Separately)
3 (Order Lugs Separately)
3 (Order Lugs Separately)
6 (Order Lugs Separately)
6 (Order Lugs Separately)

20.46
20.46
20.46

6978.00
11364.00
15152.00

1 (Order Lugs Separately)
2 (Order Lugs Separately)
2 (Order Lugs Separately)

Main Device, Underground Feed Only

System Type

2-12

EZM3225TBd
EZM3400TBh
EZM3600TBh
EZM3800TBh
EZM3800TBCUih
EZM31600TBcih
EZM32000TBh

Factory-Installed Line Side Lug
(Conductors per Phase and Neutral)
Wire Size
(AWG–kcmil)

400
600
800

400 A Al
600 A Al
800 A Al

EZM3400FSU
EZM3600FSU
EZM3800FSU

Factory-Installed Lug Landings
For use with Crimp-Type Lugs
(2-Hole Mounting)
Qty. per Phase and Neutrale

Main Lugs Terminal Boxes (3Ø Incoming and 3Ø Outgoing) e
400
400 A Al
EZM3400TBUh
16.16
1838.00
1 (Order Lugs Separately)
3Ø4W 208Y/120 Vac
24.16
2100.00
2 (Order Lugs Separately)
or
800
800 A Al
EZM3800TBUh
240/120 Vac Delta
1200
1200 A Al/Cu
EZM31200TBUch
32.16
4463.00
3 (Order Lugs Separately)
Available by special order with main circuit breaker supplied with other standard ampere ratings, consult your nearest Field Sales Office (allow 6 weeks
for delivery).
Ampere rating of the PA circuit breaker supplied with this main can be changed to a LOWER value in the field by ordering a different set of rating columns,
refer to Supplementary Digest, Section 3, for listing.
Supplied with copper horizontal bus bars and aluminum vertical bus bars.
225 A tap box supplied with isolated neutral that cannot be bonded.
For mechanical lugs (3/0 AWG–600 kcmil) order kit CMELK4, Price $91.00. Kit includes 4 lugs only. Multiple kits may be required, consult factory. For
crimp-type lugs refer to Anderson Electrical Connector Products Catalog AEC-40R.
Has a 100 kA short circuit current rating.
Does not meet EUSERC requirements.
Tap box is suitable for use on LINE or LOAD side of service equipment. Supplied with isolated neutral and provided with neutral bonding kit for use as
required. Refer to page 2-9 for appropriate short circuit current ratings.
Feed-thru lug kit available, see Accessories, page 2-15.

DE4

Discount
Schedule

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Branch Devices
Class 4162

www.schneider-electric.us

Branch Devices—NEMA 3R Construction
Branch Units—3Ø Incoming and 1Ø Outgoing

System
Type

Number
of
Meter
Sockets

Horizontal
Cross Bus
Ratinga
and Bus Bar
Material

Ring Type
5-Jaw Meter Socket
without Bypassb
Cat. No.

$ Price

Ringless Type
5-Jaw Meter Socket
without Bypass
Cat. No.

$ Price

Ringless Type
5-Jaw Meter Socket
with Horn Bypass
Cat. No.

$ Price

125 A Maximum (Order Type QO, QO-VH or QOH Circuit Breakers Separately)cd
800 A Al
EZM313125a
1554.00
EZMR313125a
1554.00
EZMH313125a
1875.00
3
800 A Cu
EZM313125M10e
4253.00
—
—
—
—
1200 A Cu
EZM313125CUX
2473.00 EZMR313125CUX 2473.00 EZMH313125CUX
2980.00
800 A Al
EZM314125a
2034.00
EZMR314125a
2039.00
EZMH314125a
2474.00
3Ø4W
4
800 A Cu
EZM314125M10e
5670.00
—
—
—
—
208Y/120 Vac
5-Jaw-Meter Socket
12.25
1200 A Cu
EZM314125CUX
3234.00 EZMR314125CUX 3234.00 EZMH314125CUX
3933.00
2P Branch
800 A Al
EZM315125a
2592.00
EZMR315125a
2592.00
EZMH315125a
3111.00
Circuit Breakers
5
800 A Cu
EZM315125M10e
7088.00
—
—
—
—
1200 A Cu
EZM315125CUX
4121.00 EZMR315125CUX 4121.00 EZMH315125CUX
4947.00
800 A Al
EZM316125a
2991.00
EZMR316125a
2991.00
EZMH316125a
3788.00
6
1200 A Cu
EZM316125CUX
4756.00 EZMR316125CUX 4756.00 EZMH316125CUX
6023.00
225 A Maximum (Order Type QBP-TM, QDP-TM,QGP-TM or QJP-TM Circuit Breakers Separately)cf
800 A Al
EZM312225a
2273.00
EZMR312225a
2273.00
EZMH312225a
2474.00
2
1200 A Cu
EZM312225CUX
3615.00 EZMR312225CUX 3615.00 EZMH312225CUX
2473.00
3Ø4W
800 A Al
EZM313225a
2792.00
EZMR313225a
2792.00
EZMH313225a
3111.00
3
208Y/120 Vac
1200 A Cu
EZM313225CUX
4438.00 EZMR313225CUX 4438.00 EZMH313225CUX
4947.00
5-Jaw-Meter Socket
17.38
800 A Al
EZM314225a
3749.00
EZMR314225a
3749.00
EZMH314225a
4148.00
2P Branch
4
Circuit Breakers
1200 A Cu
EZM314225CUX
5961.00 EZMR314225CUX 5961.00 EZMH314225CUX
6595.00
1200 A Al/Cu
EZM315225
4920.00
EZMR315225
5457.00
EZMH315225
5718.00
5
1200 A Cu
EZM315225CU
7409.00 EZMR315225CU
7409.00 EZMH315225CU
8154.00
a
For 1200 A main cross bus, add suffix “X” to catalog number. Example: EZMR313125X. Add 3% adder to list per device. Allow 6 weeks for delivery.
b
Snap-On aluminum sealing rings supplied as standard.
c
For 240/120 Vac Delta Systems add Suffix “CA” to catalog number (Example: EZM314125CA). All meter sockets are phased A and C only. Price remains
the same as the base catalog number. Order only branch units, not stocked in PDS (6-week delivery).
d
Supplied with removable drip hood and equipped with an indoor top endwall with knockouts provided.
e
Distance between meter sockets as measured from centerline to centerline is 10 inches.
f
2P Type QO (40–125 A, 10 kA max. meter center SCCR) or QO-VH and QO-H (40–60 A, 100 kA max. meter center SCCR) may be installed using
EZM125QOA adapter kit, refer to page 2-15.

Table 2.21:

Branch Units—225 A Maximum Commercial

EZMT311225
System
Type

Horizontal
Number Cross
Bus
of
Meter andRating
Bus
Bar
Sockets Material

Ringless Type
Meter Socket
without Bypass
Cat. No.

Width
(in.)

Ringless Type Meter Socket
with Lever Bypass
and Jaw Release
$ Price

Cat. No.

Width
(in.)

$ Price

Ring Type Meter Socket
with Test Block Bypass.
Meets EUSERC
Requirements
Cat. No.

Width
(in.)

2

EZML313225

Width
(in.)

METERING EQUIPMENT

Table 2.20:

$ Price

3Ø Incoming and 1Ø Outgoing g
(Order Type QBP-TM, QDP-TM,QGP-TM or QJP-TM circuit breakers separately) h
1

EZMT311225
Without Cover

1200 A Al/Cu
1200 A Al/Cu
1200 A Cu
1200 A Al/Cu
1200 A Al/Cu
1200 A Cu
1200 A Al/Cu
1200 A Al/Cu
1200 A Cu
1200 A Al/Cu

—
—
—
—
—
—
—
—
—
—

—
—
—
—
—
—
—
—
—
—

—
—
—
—
—
—
—
—
—
—

—
EZML312225
EZML312225CU
EZML312225Dj
EZML313225
EZML313225CU
EZML313225Dj
EZML314225
EZML314225CU
EZML314225Dj

—

—
EZMT311225i
22.42
3545.00
4266.00 EZMT312225i
22.42
6695.00
3Ø4W
2
19.44 6785.00
—
—
—
208Y/120 Vac
4479.00
—
—
—
5-Jaw
6420.00 EZMT313225ik 22.42 10041.00
Meter Sockets
2P
3
19.44 10208.00
—
—
—
Branch
6741.00
—
—
—
Circuit
8732.00
—
—
Breakers
19.44 13884.00
—
—
—
4
9168.00
—
—
3Ø Incoming and 3Ø Outgoing (Order QBP-TM, QDP-TM, QGP-TM or QJP-TM circuit breakers separately, see page 2-15)
1200 A Al/Cu
—
—
—
EZML331225
2792.00 EZMT331225i
22.42
3938.00
1
1200 A Cu
—
—
—
EZML331225CU 19.44 4438.00
—
—
—
3Ø4W
1200 A Al/Cu
—
—
—
EZML331225Dj
2931.00
—
—
—
240/120 Vac
1200 A Al/Cu
EZMR332225
4686.00
EZML332225
5105.00 EZMT332225i
22.42
6957.00
Delta
or
2
1200 A Cu
EZMR332225CU
19.44
7451.00 EZML332225CU 19.44 8117.00
—
—
—
208Y/120 Vac
1200 A Al/Cu
—
—
EZML332225Dj
5360.00
—
—
—
7-Jaw
1200 A Al/Cu
EZMR333225
7337.00
EZML333225
7794.00 EZMT333225ik 22.42 10304.00
Meter Socket
3P
3
1200 A Cu
EZMR333225CU
19.44 11664.00 EZML333225CU 19.44 12395.00
—
—
—
Branch
1200 A Al/Cu
—
—
EZML333225Dj
8184.00
—
—
—
Circuit
1200 A Al/Cu
EZMR334225
10169.00
EZML334225
10667.00
—
—
Breakers
4
1200 A Cu
EZMR334225CU
19.44 16167.00 EZML334225CU 19.44 16959.00
—
—
—
1200 A Al/Cu
—
—
EZML334225Dj
11214.00
—
—
g
For 240/120 Vac Delta Systems add Suffix “CA” to catalog number (Example: EZM314125CA). All meter sockets are phased A and C only. Price remains
the same as the base catalog number. Order only branch units, not stocked in PDS (6-week delivery).
h
2P Type QO (40–125 A, 10 kA max. meter center SCCR) or QO-VH and QO-H (40–60 A, 100 kA max. meter center SCCR) may be installed using
EZM125QOA adapter kit, refer to page 2-15.
i
Supplied with bondable neutral, suitable for use as service equipment. Use main lugs tap box type EZM-TBU for Six Disconnect Rule applications to
feed this device. Supplied with copper horizontal bus bars and aluminum vertical bus bars.
j
Supplied with removable drip hood and equipped with an indoor top endwall with knockouts provided.
k
Does not meet EUSERC 48 in. minImum / 75 in. maximum meter height requirements for outdoor installations. The bottom meter socket is 37 inches above
ground when the device is mounted with the top meter socket at 75 inches above ground. EUSERC indoor requirements are 36 in. minimum / 75 in. maximum.
400 A maximum Commercial Branch Units . . . . . . . . . . . . . . . . . Page 2-14.

© 2009 Schneider Electric
All Rights Reserved

DE4

Discount
Schedule

2-13

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

EZM Main Devices
Class 4162
www.schneider-electric.us

Branch Devices—NEMA 3R Construction (Continued)
Table 2.22:

Branch Units—400 A Maximum Commercial

System
Type

Number
of Meter
Sockets

Horizontal
Cross Bus
Rating

Ringless Type Meter Socket
with Lever Bypass and Jaw Release—
IncludesFactory-Installed
400 A Type DJM Circuit Breaker. ab
Cat. No.

Width
(in.)

$ Price

Ringless Type K Bolt-on Meter Socket
with Manual Bypass—
Includes Factory-Installed
400 A Type DJM Circuit Breaker. a
Cat. No.

Width
(in.)

$ Price

2

3Ø Incoming and 1Ø Outgoing c
3Ø4W
1
1200 A Cu
EZML311400
23.21
5981.00
EZMK311400
27.56
8924.00
208Y/120 Vac
5-Jaw Meter Socket
2
1200 A Cu
EZML312400
23.21
11963.00
EZMK312400
27.56
17534.00
2P Branch Circuit Breakers
3Ø Incoming and 3Ø Outgoing
3Ø4W
1
1200 A Cu
EZML331400
23.21
6978.00
EZMK331400
27.56
10515.00
240/120 Vac Delta
or 208Y/120 Vac
2
1200 A Cu
EZML332400
23.21
13956.00
EZMK332400
27.56
20715.00
7-Jaw Meter Socket
3P Branch Circuit Breakers
a
DJM circuit breaker has adjustable trip settings from 160–400 A. If required, order seal kit, catalog number 29375. DJM circuit breaker terminal lug kit
32508 factory-installed and accomodates (1) 2 AWG–500 kcmil Al or (1) 2 AWG–600 kcmil Cu per phase. Alternate lug kit 32510 for DJM circuit breaker
is available, see Accessories, page 2-15. Additional field-installed DB circuit breaker accessories are available, see page 7-35.
b
Supplied with Class 320 lever bypass meter socket. Use anti-inversion clip kit, catalog number MMLRK, if required. Order from page 2-15.
c
For 240/120 Vac Delta Systems add Suffix “CA” to catalog number (Example: EZML312400CA). All meter sockets are phased A and C only. Price
remains the same as the base catalog number. “Order only” branch units, not stocked in PDS (4–6 week delivery). Order point Lexington.

EZM Main with Busway Tap
METERING EQUIPMENT

EZMK311400

EZ Meter-Pak metering equipment is available for use in high rise applications for connection to 800–5000 A I-Line® or
I-Line II plug-in busway installed as a vertical riser. Three phase only EZM main devices in the form of a main circuit
breaker or main fusible switch are available with an integral busway tap extending from the right or left side of the main
device and phased to align with the busway for either neutral front or neutral back installations.

Busway Mains, 3Ø only (Indoor only) ordering instructions:

Wall

5.75

146
CL of
Busway

Plan View Detail

Step 1: Determine height to center line of busway plug-in opening, check local utility requirements for minimum and
maximum meter socket heights.
Step 2: Determine side of EZM main section for busway tap to extend from (busway tap is an integral part of the main
and extends to the left or right on the EZM device as viewed from the front).
Step 3: Check phasing of busway riser to insure that it matches phasing of busway tap on main section (indicated as
neutral front or neutral back as viewed from the front).
Step 4: Select Cat. No. from tables below.
Step 5: Busway main devices are build to order specials and require 4 to 6 weeks for delivery (order point Lexington).

Width
Top of EZM
Mounting
Channel
(See Note)

Table 2.23:
Ampere Width
Rating
(in.)

EZM
Bus Tap

EZM Mains with Busway Tap (Three Phase Only—Note positioning left or right below)
Horizontal
Cross Bus
Rating

Main Circuit Breaker with Busway Tap d
Neutral Front

Neutral Back

Busway to RIGHT of metering equipment lineup
56.11
400
18.66
400 A Al
EZM3400CBNFBTR
1425
CL of Busway
600
18.66
600 A Al
EZM3600CBNFBTR
Plug-in Opening
800
18.66
800 A Al
EZM3800CBNFBTR
31.11
790
1000
18.66
1000 A Al
EZM31000CBNFBTRg
4.11
104
1200
30.19 1200 A Al/Cu EZM31200CBNFBTRfg
Busway to LEFT of metering equipment lineup
Floor Level
400
18.66
400 A Al
EZM3400CBNFBTL
EZM3800CBNFBTR
600
18.66
600 A Al
EZM3600CBNFBTL
800
18.66
800 A Al
EZM3800CBNFBTL
1000
18.66
1000 A Al
EZM31000CBNFBTLg
1200
30.19 1200 A Al/Cu EZM31200CBNFBTLfg
Width
Top of EZM
Mounting
Channel
EZM
Bus Tap

(See Note)

56.11

d
e
f
g
Note:

Main Fusible Switch with Busway Tap e
$ Price

Neutral Front

Neutral Back

$ Price

EZM3400CBNBBTR
EZM3600CBNBBTR
EZM3800CBNBBTR
EZM31000CBNBBTRg
EZM31200CBNBBTRfg

8886.00 EZM3400FSNFBTR
12513.00 EZM3600FSNFBTR
15744.00 EZM3800FSNFBTR
19292.00
—
25394.00
—

EZM3400FSNBBTR
EZM3600FSNBBTR
EZM3800FSNBBTR
—
—

6732.00
10640.00
13830.00
—
—

EZM3400CBNBBTL
EZM3600CBNBBTL
EZM3800CBNBBTL
EZM31000CBNBBTLg
EZM31200CBNBBTLfg

8886.00
12513.00
15744.00
19292.00
25394.00

EZM3400FSNBBTL
EZM3600FSNBBTL
EZM3800FSNBBTL
—
—

6732.00
10640.00
13830.00
—
—

EZM3400FSNFBTL
EZM3600FSNFBTL
EZM3800FSNFBTL
—
—

Has a maximum 65 kA short circuit current rating.
Has a 100 kA short circuit current rating. Requires Class T ( 300 Vac) fuses, order separately.
Supplied with copper horizontal bus bars and aluminum vertical bus bars.
Requires use of branch units supplied with 1200 A horizontal cross bus.
Dimensions shown will position the centerline of top meter socket of a 125 A, 5-Gang or 6-Gang branch unit at 72" above floor level. Check with utility
to meet local requirements.

1425

CL of Busway
Plug-in Opening

31.11
790

4.11
104

Floor Level

EZM3800FSNBBTL

2-14

DE4

Discount
Schedule

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers
Class 4162
www.schneider-electric.us

EZ Meter-Pak® Meter Centers and Accessories
Tenant Circuit Breakers

QO2100VH
2P, Plug-on Type
Circuit Breaker

QDP22200TM

Ampere
Rating

10 k AIR
Cat. No.

22 k AIR
$ Price

125 A Max. EZM Branch Unit Tenant Circuit Breakers
40
QO240
67.00
50
QO250
67.00
60
QO260
67.00
70
QO270
134.00
2
80
QO280
189.00
90
QO290
189.00
100
QO2100
189.00
110
QO2110
428.00
125
QO2125
428.00
225 A Max. EZM Branch Unit Tenant Circuit Breakers
Ampere
10 k AIR
Rating
40
QO240a
67.00
50
QO250a
67.00
60
QO260a
67.00
70
QBP22070TM
474.00
80
QBP22080TM
474.00
90
QBP22090TM
474.00
2
100
QBP22100TM
474.00
110
QBP22110TM
474.00
125
QBP22125TM
474.00
150
QBP22150TM
474.00
175
QBP22175TM
474.00
200
QBP22200TM
474.00
225
QBP22225TM
474.00
70
QBP32070TM
1248.00
80
QBP32080TM
1248.00
90
QBP32090TM
1248.00
100
QBP32100TM
1248.00
110
QBP32110TM
1248.00
3
125
QBP32125TM
1248.00
150
QBP32150TM
1248.00
175
QBP32175TM
1248.00
200
QBP32200TM
1248.00
225
QBP32225TM
1248.00
a
Must use EZM125QOA adapter.
b
QO-VH tenant circuit breaker is rated 22 k AIR max.

Description
1Ø3W Bus Extension (6 in.wide)
1200 A Bus
1Ø3W Bus Extension (12 in.wide)
Extension (Indoor/
3Ø4W Bus Extension (6 in. wide)
Outdoor Cu bus)
3Ø4W Bus Extension (12 in. wide)
1Ø3W Inside Corner (14.75 in. wide)
1200 A Bussed
1Ø3W Outside Corner (6.20 in. wide)
Corner Sections
Inside Corner (14.75 in. wide)
(Indoor Cu bus only) 3Ø4W
3Ø4W Outside Corner (6.20 in. wide)
1200 A Transition
Add right of old style 1Ø EZM lineup
Sections—
Add right of old style 3Ø EZM lineup
Old to New
Add left of old style 1Ø EZM lineup
(10.7 in. wide Cu
Add left of old style 3Ø EZM lineup
bus)
Mounting Channel
72" long
Secondary Surge
For use with 1 or 2-SDSA1175 or 1-SDSA3650
Arrester Mounting kit (order surge arrester separately)
Stud Kit for EZM-TB Includes (2) 1/2 in.-13 studs per pad and mounting
400–600 A terminal hardware. Four pads per kit. With suffix TBCU only.
box

QO Adapter for bolton Q-frame tenant
circuit breakers
DJM Circuit Breaker
Alternate Lug (DE2)
DJM Circuit Breaker
Seal Kit
Meter Socket Closing
Plates

Cat. No.
EZM1EXT6
EZM1EXT
EZM3EXT6
EZM3EXT
EZM1CORNER
EZM1ELBOW
EZM3CORNER
EZM3ELBOW

$ Price
767.00
767.00
966.00
966.00
1788.00
1788.00
2217.00
2217.00

Cat. No.

$ Price

—
—
—
—
—
—
—
—
—

—
—
—
—
—
—
—
—
—

317.00
317.00
317.00
528.00
651.00
651.00
651.00
1389.00
1389.00

65 k AIR

100 k AIR

146.00
QOH240ca
317.00
—
—
146.00
QOH250ca
317.00
—
—
146.00
QOH260ca
317.00
—
—
1143.00
QGP22070TM
1521.00
QJP22070TM
1890.00
1143.00
QGP22080TM
1521.00
QJP22080TM
1890.00
1143.00
QGP22090TM
1521.00
QJP22090TM
1890.00
1143.00
QGP22100TM
1521.00
QJP22100TM
1890.00
1143.00
QGP22110TM
1521.00
QJP22110TM
1890.00
1143.00
QGP22125TM
1521.00
QJP22125TM
1890.00
1143.00
QGP22150TM
1521.00
QJP22150TM
1890.00
1143.00
QGP22175TM
1521.00
QJP22175TM
1890.00
1143.00
QGP22200TM
1521.00
QJP22200TM
1890.00
QGP22225TM
1521.00
QJP22225TM
1890.00
1143.00
1784.00
QGP32070TM
2442.00
QJP32070TMd
2796.00
1784.00
QGP32080TM
2442.00
QJP32080TMd
2796.00
1784.00
QGP32090TM
2442.00
QJP32090TMd
2796.00
1784.00
QGP32100TM
2442.00
QJP32100TMd
2796.00
1784.00
QGP32110TM
2442.00
QJP32110TMd
2796.00
1784.00
QGP32125TM
2442.00
QJP32125TMd
2796.00
1784.00
QGP32150TM
2442.00
QJP32150TMd
2796.00
1784.00
QGP32175TM
2442.00
QJP32175TMd
2796.00
1784.00
QGP32200TM
2442.00
QJP32200TMd
2796.00
1784.00
QGP32225TM
2442.00
QJP32225TMd
2796.00
c
QOH tenant circuit breaker is rated 42 k AIR max.
d
3-pole QJP tenant circuit breaker is rated 65 k AIR max. at 240/120 Vac,
3Ø4W High Leg Delta, or 100 k AIR max. at 208Y/120 Vac, 3Ø4W.

Accessories (continued)

EZM1TRANR
EZM3TRANR
EZM1TRANL
EZM3TRANL

237.00
252.00
315.00
332.00

EZM72MC

63.00

MMSAMKe

80.00

EZMSK2

246.00
150.00
200.00
233.00
480.00

Description
Cat. No.
$ Price
Snap-on (Stainless Steel)
ARP00026
16.70
Sealing Rings
Screw-Type (Aluminum)
29008W
20.10
Latch-Type (Aluminum)-standard
2920910001
8.00
For use on ringless EZM or MP branch unit covers,
Barrel Lock Kit
includes 6 each of head protectors, lock nuts and
MMBLC
66.00
sealing caps. (Barrel lock not included.)
Tenant Circuit
125 A Branches—2P Type QO (2 per opening)
QOFP
3.60
Breaker Filler Plates 225 A Branches—2P and 3P Q-Frame
EZMPCP
26.00
e
Consult your nearest Square D/Schneider Electric sales office for details.
f
All sockets include 5th Jaw factory-installed except EZM11__ devices.
g
Meter center short circuit current rating is 10,000 RMS symmetrical amperes with manual
circuit closers installed (bypass is not designed for use as continuous duty).
h
For use on ring type meter sockets only.

Busway Transition Section
EZM busway transition section provides no overcurrent protection for
the downstream EZM branch units. Tenant main circuit breakers in
these branch units must be selected as “fully rated” equipment.
(Examples: QO for 10 kA, QO-VH for 22 kA or QOH for 42 kA.)
Table 2.26:

1 per kit
5J f
Use with Type EZMR 1Ø meter socket only
MMHB
For (1) 125–225 A ring-type socket only—
MM200MBgh
indoor/outdoor
Rejects 100 A and 200 A watt-hour meters in Class
MMLRK
320 meter sockets in Type EZML branch units.
For 2P Type QO (40–125 A, 10 kA max. meter
center SCCR) or QO-VH and QOH (40–60 A, 100 EZM125QOA
kA max. meter center SCCR)
Kit includes (3) 2-barrel lugs for (2) 2/0 AWG–350
32510
kcmil AL/Cu or (2) 2/0 AWG–500 kcmil AL per lug.
Tamper-evident kit to seal DJM trip dial cover, (1)
29375
per circuit breaker, if required. Meets NEC 240-6 [c]
Lexan Closing Plate—EZM, EZMR, EZMH, EZMT
29007
Metal Closing plate—EZMR, EZMH, EZML
RSG4

EZM Busway Transition Sections (3Ø only)

Ampere
I-Line® Busway location
Rating
1200 RIGHT of EZM Transition Section
1200 LEFT of EZM Transition Section

(24) additional lugs, 600 kcmil Al/Cu, (6) per phase EZM1600FTLK3 915.00
and neutral.

© 2009 Schneider Electric
All Rights Reserved

QOH240
QOH250
QOH260
QOH270
QOH280
QOH290
QOH2100
QOH2110
QOH2125

25 k AIR
QO240VHba
QO250VHba
QO260VHba
QDP22070TM
QDP22080TM
QDP22090TM
QDP22100TM
QDP22110TM
QDP22125TM
QDP22150TM
QDP22175TM
QDP22200TM
QDP22225TM
QDP32070TM
QDP32080TM
QDP32090TM
QDP32100TM
QDP32110TM
QDP32125TM
QDP32150TM
QDP32175TM
QDP32200TM
QDP32225TM

100 k AIR
$ Price

Accessory

(1) 1/0–600 kcmil or (2) 1/0–250 kcmil per lug
MMLK250
Al/Cu Lug Kits
(Each kit includes
(2) 3/0–500 kcmil per lug
MMLK500
three, 2-barrel lugs.) (2) 2–600 kcmil per lug
MMLK600
Feed -Thru for
(4) 750 kcmil Al/Cu lugs per phase and neutral. Al EZM600FTLK3
EZM-TBCU 800 A
wire 600 A max. Cu wire 800 A max.
Terminal Box

Anti-inversion Clip

Cat. No.

146.00
146.00
146.00
224.00
315.00
315.00
315.00
1034.00
1034.00

Table 2.25:
Accessories

Accessory

Feed-Thru for
EZM-TB 1600 A
Terminal Box
Fifth jaw Kit
Horn Bypass Kit
Slider Type Manual
Circuit Closer

42 k AIR
$ Price

QO240VH
QO250VH
QO260VH
QO270VH
QO280VH
QO290VH
QO2100VH
QO2110VH
QO2125VH

Poles

Accessories
Table 2.25:

Cat. No.

METERING EQUIPMENT

Poles

2

Table 2.24:

18.30
16.70

273.00

Neutral Back

EZM3BUSRF
EZM3BUSLF

EZM3BUSRB
EZM3BUSLB

16.11

Width
(in.)
12.00
12.00

$ Price
2625.00
2625.00

16.11

409
Width

409
Width

4.11

4.11

104

104

EZM
Bus Tap

171.00
12.00

Neutral Front

Top of EZM
Mounting
Channel

EZM
Bus Tap

1.00

1.00

55.11

55.11

25

Top of EZM
Mounting
Channel

25

CL of Busway
Plug-in Opening

CL of Busway
Plug-in Opening

56.11
1425

1400

1400

56.11
1425

—
Floor Level

—

EZM3BUSRF and EZM3BUSRB

Floor Level

EZM3BUSLF and EZM3BUSLB

10.10
122.00

DE2A

Discount
Schedule

2-15

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

EZ Meter-Pak® Meter Centers

Dimensions
Class 4162
www.schneider-electric.us

Dimensions

W

Table 2.27:

Main Devices Dimensions (in.)
Height

MC (Mounting Channel)

Cat. No.

H

Main Device
W
T

METERING EQUIPMENT

B

MC (Mounting Channel)

2
H

Branch Device

Table 2.28:

Depth

MC

Cat. No.

Height

Width

Depth

MC

19.50
53.97
70.05
61.19
70.05
44.71
61.19
69.69
51.58
68.91
68.91
71.09
21.81
53.97
69.03
53.97
69.03
30.46
35.71
53.97
69.03
53.97
69.03
30.46
53.97
69.03
53.97
69.03
53.97
51.76
39.96
19.34
19.34
19.50

14.52
18.66
34.19
30.19
34.19
33.16
30.19
27.69
22.33
30.19
30.19
30.19
11.50
18.66
20.46
18.66
20.46
17.00
17.16
18.66
26.19
18.66
26.19
17.00
18.66
26.19
18.66
26.19
18.66
23.93
25.06
11.66
6.00
14.40

8.01
11.50
18.33
18.33
18.33
11.12
18.33
18.45
13.00
18.33
18.33
21.46
5.81
11.50
11.50
11.50
11.50
6.53
8.00
11.50
11.65
11.50
11.65
6.53
11.50
11.65
11.50
11.65
11.50
6.41
11.12
6.37
6.37
8.02

11.85 b
34.30
46.99
38.13
46.99
31.17
38.13
49.12
27.92
44.25
44.25
37.62
13.00 b
34.30
49.37
34.30
49.37
16.29
27.17
34.30
49.37
34.30
49.37
16.29
34.30
49.37
34.30
49.37
34.30
28.01
31.17
11.85 b
11.85 b
11.85 b

Branch Device Dimensions (in.)d
Cat. No.

Single Phase
EZM112225 [X, CUX]
EZM113125 [X, CUX]
EZM113225 [X, CUX]
EZM114125 [X, CUX]
EZM114225 [X, CUX]
EZM115125 [X, CUX]
EZM115225 [CU]
EZM116125 [X, CUX]
EZMH112225 [X, CUX]
EZMH113125 [X, CUX]
EZMH113225 [X, CUX]
EZMH114125 [X, CUX]
EZMH114225 [X, CUX]
EZMH115125 [X, CUX]
EZMH115225 [CU]
EZMH116125 [X, CUX]
EZMK111400
EZMK112400
EZML111225 [CU]
EZML111225D
Three Phase
EZM312225 [X, CUX, CA, XCA, CUXCA]
EZM313125 [X, CUX, CA, XCA, CUXCA]
EZM313125M10
EZM313225 [X, CUX, CA, XCA, CUXCA]
EZM314125 [X, CUX, CA, XCA, CUXCA]
EZM314125M10
EZM314225 [X, CUX, CA, XCA, CUXCA]
EZM315125 [X, CUX, CA, XCA, CUXCA]
EZM315125M10
EZM315225 [CU, CA, CUCA]
EZM316125 [X, CUX, CA, XCA, CUXCA]
EZMH312225 [X, CUX, CA, XCA]
EZMH313125 [X, CUX, CA, XCA]
EZMH313225 [X, CUX, CA, XCA]
EZMH314125 [X, CUX, CA, XCA]
EZMH314225 [X, CUX, CA, XCA]
EZMH315125 [X, CUX, CA, XCA]
EZMH315225 [CU, CA, CUCA]
EZMH316125 [X, CUX, CA, XCA]
EZMK311400 [CA]
EZMK312400 [CA]
EZMK331400
EZMK332400
EZML311400 [CA]
EZML311225 [CU, CA, CUCA]
EZML312225 [CU, CA, CUCA]
EZML312225D [CA]
EZML312400 [CA]
EZML313225 [CU, CA, CUCA]
EZML313225D [CA]
d

2-16

Width

EZM11000CB
53.97
18.66
11.50
34.30
EZM1ELBOW (indoor only) a
EZM11000CBU
70.05
34.19
18.33
46.99
EZM31000CB
EZM11200CB
61.19
30.19
18.33
38.13
EZM31000CBU
EZM11200CBU
70.05
34.19
18.33
46.99
EZM31200CB
EZM11200FS
61.19
30.19
18.33
38.13
EZM31200CBU
EZM11200FSU
70.05
34.19
18.33
46.99
EZM31200TBU
EZM11200TBU
44.71
33.16
11.12
31.17
EZM31600CB
EZM11600CB
61.19
30.19
18.33
38.13
EZM31600CBU
EZM11600CBU
69.69
27.69
18.45
49.12
EZM31600TB
EZM11600TB
51.58
22.33
13.00
27.92
EZM32000CB
EZM12000CB
68.91
30.19
18.33
44.25
EZM32000CBU
EZM12000CBU
68.91
30.19
18.33
44.25
EZM32000TB
EZM12000TB
71.09
30.19
21.46
37.62
EZM3225TB
EZM1225TB
21.81
11.50
5.81
13.00 b EZM3400CB
EZM1400CB
53.97
18.66
11.50
34.30
EZM3400CBU
EZM1400CBU
69.03
20.46
11.50
49.37
EZM3400FS
EZM1400FS
53.97
18.66
11.50
34.30
EZM3400FSU
EZM1400FSU
69.03
20.46
11.50
49.37
EZM3400TB
EZM1400TB
30.46
17.00
6.53
16.29
EZM3400TBU
EZM1400TBU
35.71
17.16
8.00
27.17
EZM3600CB
EZM1600CB
53.97
18.66
11.50
34.30
EZM3600CBU
EZM1600CBU
69.03
20.46
11.50
49.37
EZM3600FS
EZM1600FS
53.97
18.66
11.50
34.30
EZM3600FSU
EZM1600FSU
69.03
20.46
11.50
49.37
EZM3600TB
EZM1600TB
30.46
17.00
6.53
16.29
EZM3800CB
EZM1800CB
53.97
18.66
11.50
34.30
EZM3800CBU
EZM1800CBU
69.03
20.46
11.50
49.37
EZM3800FS
EZM1800FS
53.97
18.66
11.50
34.30
EZM3800FSU
EZM1800FSU
69.03
20.46
11.50
49.37
EZM3800TB
EZM1800TB
53.97
18.66
11.50
34.30
EZM3800TBCU
EZM1800TBCU
51.76
23.93
6.41
28.01
EZM3800TBU
EZM1800TBU
39.96
25.06
11.12
31.17
EZM3EXT
EZM1EXT
19.34
11.66
6.37
11.85 b EZM3EXT6
EZM1EXT6
19.34
6.00
6.37
11.85 b EZM3CORNER (indoor only)
EZM1CORNER (indoor only) c 19.50
14.40
8.02
11.85 b
a
Each leg of elbow section measures 6.17 in. corner of wall to start of next enclosure.
b
Device supplied without mounting channel, secure to wall by use of swingable mounting feet.
c
Each leg of this corner section measures 14.72 in. from wall to start of next enclosure.

Height

Width

Depth

MC

Top

Bottom

43.41
42.37
43.41
48.12
52.00
57.12
61.00
66.12
43.41
42.37
43.41
48.12
52.00
57.12
61.00
66.12
45.55
72.99
39.06
39.06

17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
27.56
27.56
19.44
19.44

8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
9.74
9.74
9.44
9.44

32.34
31.30
32.34
31.30
32.34
31.30
32.35
40.30
32.34
31.30
32.34
31.30
32.34
31.30
32.35
40.30
37.81
37.81
25.51
25.51

22.18
13.18
13.18
9.93
12.77
9.93
12.77
9.93
22.18
13.18
13.18
9.93
12.77
9.93
12.77
9.93
24.51
22.26
25.67
25.67

12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
21.04
21.04
13.39
13.39

Cat. No.
EZML111400
EZML112225 [CU]
EZML112225D
EZML112400
EZML113225 [CU]
EZML113225D
EZML114225 [CU]
EZML114225D
EZMR112225 [X, CUX]
EZMR113125 [X, CUX]
EZMR113225 [X, CUX]
EZMR114125 [X, CUX]
EZMR114225 [X, CUX]
EZMR115125 [X, CUX]
EZMR115225 [CU]
EZMR116125 [X, CUX]
EZMT111225
EZMT112225
EZMT113225

43.41
17.38
8.09
32.34
22.18
12.23 EZML314225 [CU, CA, CUCA]
42.37
12.25
7.09
31.30
13.18
11.19 EZML314225D [CA]
42.37
12.25
7.09
24.29
10.18
12.19 EZML331225 [CU]
43.41
17.38
8.09
32.34
13.18
12.23 EZML331225D
48.12
12.25
7.09
31.30
9.93
11.19 EZML331400
52.12
12.25
7.09
34.29
9.93
12.19 EZML332225 [CU]
52.00
17.38
8.09
32.34
12.77
12.23 EZML332225D
57.12
12.25
7.09
31.30
9.93
11.19 EZML332400 [CU]
62.12
12.25
7.09
34.29
9.93
12.19 EZML333225 [CU]
61.00
17.38
8.09
32.35
12.77
12.23 EZML333225D
66.12
12.25
7.09
40.30
9.93
11.19 EZML334225 [CU]
43.41
17.38
8.09
32.34
22.18
12.23 EZML334225D
42.37
12.25
7.09
31.30
13.18
11.19 EZMR312225 [X, CUX, CA, XCA]
43.41
17.38
8.09
32.34
13.18
12.23 EZMR313125 [X, CUX, CA, XCA]
48.12
12.25
7.09
31.30
9.93
11.19 EZMR313225 [X, CUX, CA, XCA]
52.00
17.38
8.09
32.34
12.77
12.23 EZMR314125 [X, CUX, CA, XCA]
57.12
12.25
7.09
31.30
9.93
11.19 EZMR314225 [X, CUX, CA, XCA]
61.00
17.38
8.09
32.35
12.77
12.23 EZMR315125 [X, CUX, CA, XCA]
66.12
12.25
7.09
40.30
9.93
11.19 EZMR315225 [CU, CA, CUXCA]
45.55
27.56
9.74
30.60
24.51
21.04 EZMR316125 [X, CUX, CA, XCA]
72.99
27.56
9.74
37.81
22.26
21.04 EZMR332225 [CU]
45.55
27.56
9.74
30.60
24.51
21.04 EZMR333225 [CU]
72.99
27.56
9.74
37.81
22.26
21.04 EZMR334225 [CU]
45.55
23.21
9.44
37.81
24.02
21.53 EZMT311225 [CA]
39.06
19.44
9.44
25.51
25.67
13.39 EZMT312225 [CA]
39.06
19.44
9.44
25.51
11.67
13.39 EZMT313225 [CA]
39.06
19.44
9.44
25.51
11.67
13.39 EZMT331225
69.61
23.21
9.44
37.82
20.64
21.53 EZMT332225
53.06
19.44
9.44
39.51
11.67
13.39 EZMT333225
53.06
19.44
9.44
39.51
11.67
13.39
Standard branch units are available without suffix added.

Height

Width

Depth

MC

Top

Bottom

44.55
39.06
39.06
69.61
53.06
53.06
67.06
67.06
43.41
42.37
43.41
48.12
52.00
57.12
61.00
66.12
25.45
60.56
79.56

23.21
19.44
19.44
23.21
19.44
19.44
19.44
19.44
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
22.42
22.42
22.42

9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
8.09
7.09
8.09
7.09
8.09
7.09
8.09
7.09
9.38
9.38
9.38

37.81
25.51
25.51
37.81
39.51
39.51
39.51
39.51
32.34
31.30
32.34
31.30
32.34
31.30
32.35
40.30
16.19
43.63
48.25

24.02
11.67
11.67
20.64
11.67
11.67
11.67
11.67
22.18
13.18
13.18
9.93
12.77
9.93
12.77
9.93
4.67
12.67
12.67

21.53
13.39
13.39
21.53
13.39
13.39
13.39
13.39
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
20.45
28.89
28.89

67.06
67.06
39.06
39.06
45.55
39.06
39.06
69.61
53.06
53.06
67.06
67.06
43.41
42.37
43.41
48.12
52.00
57.12
61.00
66.12
39.06
53.06
67.06
25.45
60.56
79.56
25.12
60.56
79.56

19.44
19.44
19.44
19.44
23.21
19.44
19.44
23.21
19.44
19.44
19.44
19.44
17.38
12.25
17.38
12.25
17.38
12.25
17.38
12.25
19.44
19.44
19.44
22.42
22.42
22.42
22.42
22.42
22.42

9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
9.44
8.09
8.09
8.09
7.09
8.09
7.09
8.09
7.09
9.44
9.44
9.44
9.38
9.38
9.38
9.38
9.38
9.38

39.51
39.51
25.51
25.51
37.81
35.51
35.51
37.82
39.51
39.51
39.51
39.51
32.34
31.30
32.34
31.30
32.34
31.30
32.35
40.30
25.51
39.51
39.51
16.19
43.63
48.25
16.19
43.63
48.25

11.67
11.67
25.67
25.67
24.02
11.67
11.67
20.64
11.67
11.67
11.67
11.67
22.18
13.18
13.18
9.93
12.77
9.93
12.77
9.93
11.67
11.67
11.67
4.67
12.67
12.67
4.67
12.67
12.67

13.39
13.39
13.39
13.39
21.53
13.39
13.39
21.53
13.39
13.39
13.39
13.39
12.23
11.19
12.23
11.19
12.23
11.19
12.23
11.19
13.39
13.39
13.39
20.45
28.89
28.89
20.45
28.89
28.89

© 2009 Schneider Electric
All Rights Reserved

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2009:03:04 15:07:16-06:00
Modify Date                     : 2009:07:21 11:25:43-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Instance ID                     : uuid:09105744-bf36-a749-a4a0-a8b0ffc2961e
Document ID                     : adobe:docid:indd:b9f34800-0a58-11de-94b9-c9f90b55436d
Rendition Class                 : proof:pdf
Derived From Instance ID        : d77ef6d0-0342-11de-8b2d-ac93865527c8
Derived From Document ID        : adobe:docid:indd:59304f5e-032f-11de-8b2d-ac93865527c8
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:96E6D313E0F8DD1193D3A206EA549064, uuid:5B665946E0F8DD1193D3A206EA549064, uuid:4FF6EF6A225911DD91B6E1D8435B5599, uuid:4FF6EF6A225911DD91B6E1D8435B5599
Manifest Reference Document ID  : uuid:96CC0F152BCCDD11A7E9FDD05B4D97A8, uuid:4480D645750C11DDA036ECEE5BB6739C, uuid:4FF6EF69225911DD91B6E1D8435B5599, uuid:4FF6EF69225911DD91B6E1D8435B5599
Metadata Date                   : 2009:07:21 11:25:43-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10674 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : Schneider Electric DIGEST 175 - Metering Equipment
Creator                         : 
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 16
EXIF Metadata provided by EXIF.tools

Navigation menu