PDPC 01000 0607 104366 Catalog
2014-09-05
: Pdf 104366-Catalog 104366-Catalog 783643 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 940
| Download | |
| Open PDF In Browser | View PDF |
SPEEDFAXTM 2007–2008
SPEEDFAXTM 2007–2008
Product Catalog
Product Catalog
power distribution
1-800-964-4114
info.sea@siemens.com
www.sea.siemens.com
쏘2007 Siemens Energy & Automation, Inc. All Rights Reserved.
Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective
companies. Specifications are subject to change without notice.
PDPC-01000-0607 (Supersedes PDPC-01000-0305) 150M0607RDD Printed in USA
s
Siemens Energy & Automation, Inc.
3333 Old Milton Parkway
Alpharetta, GA 30005
Residential
Commercial
Industrial
s
We offer a wide variety of high quality products and modifications
including combination and non-combination starters that are guaranteed
for trouble-free operation.
Space getting smaller?
Siemens switchboards give you room to breathe.
integrated
modpro
ModPro PlusTM means shorter turn-around for standard and modified
NEMA control products. Instead of waiting on the factory, our ModPro
Plus distributors can turn your order around as quickly as the same day.
쏘2007 Siemens Energy & Automation, Inc.
쏘2007 Siemens Energy & Automation, Inc.
When Waiting Is Not An Option,
ModPro Plus Delivers.
s
For more information or to contact a sales representative, call,
e-mail, or visit our website.
Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com/modproplus
The Siemens integrated power systems switchboard provides a smaller,
modular, reliable solution to meet the demanding space needs of the
electrical room.
Components such as power monitoring, lighting panels, transformers,
and lighting control are all incorporated into one piece of equipment.
One product, one supplier, and one invoice – it just makes sense.
Ask your sales representative about using i-3 Control TechnologyTM in
your IPS switchboard design.
For more information or to contact a sales representative, call,
e-mail, or visit our web site.
Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com
s
Reliable Products From The
Technology Leader
Technology Enabling Reliability.
When it comes to ready availability,
easy installation, and fewer callbacks,
you need a manufacturer you can
trust. Our products and systems are
engineered to take on the most
demanding conditions, always
available day after day. Combined
with a world-class service and
maintenance network, complete
support is always there, 24/7.
RESIDENTIAL
For product offerings see
Sections 1 – 6
COMMERCIAL
For product offerings see
Sections 2 – 14
INDUSTRIAL
For product offerings see
Sections 3 – 16
1
Load Centers
2
Meter Centers
3
Safety Switches
4
Disconnect Switches
5
Enclosed Circuit Breakers
6
Circuit Breakers
7
Transformers
8
Power Monitoring
9
TVSS
10
Panelboards
11
Lighting Controls
12
Switchboards
13
Switchgear
14
Busway Systems
15
Motor Control Centers
16
Control Products
17
Standby Generators
18
Technical
19
Product Index
Detailed Table of Contents
located at beginning of each section
Your single point of contact for general inquiries, customer service, sales office information, and product inquiries:
Siemens 24/7 Call Center: 1-800-964-4114 / Email: info.sea@siemens.com / Internet: www.sea.siemens.com
Important
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser's purpose, the
matter should be referred to the local Siemens sales office. The contents of this catalog shall not become part of
or modify any prior or existing agreement, commitment or relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not create new warranties or modify the existing warranty.
1SPEEDFAX
TM
2007-2008 Load Centers & Circuit Breakers
1
Contents
1-2
EQ® and Ultimate Series Connected System
1-3
Ultimate™ Load Center Features
1-4
Ultimate™ Load Center Product Offering
1-5
EQ and Ultimate Catalog Numbering System
1-6
®
Load Centers
The Ultimate Load Centers
1-7
Value Pack Load Centers
1-8
EQ Small Circuit Load Centers
1-9
EQ Circuit Breaker Enclosures
1-10
EQ 3-Phase Load Centers
1-11
EQ High Ampere (300–400) Load Centers
1-12
Special Application Load Centers
1-13
Riser Panel Load Centers
1-14
Air Conditioning Disconnects
1-15
OEM and Replacement Interiors
1-16
Ultimate MB Load Center Wiring Diagrams
1-17
Ultimate ML Load Center Wiring Diagrams
1-18
EQ 3-Phase Load Center Wiring Diagrams
1-19
EQ High Ampere Load Center Wiring Diagrams
1-20
Ultimate Load Center Knockout Diagrams
1-21
EQ Load Center Outdoor Knockout Diagrams
1-22
EQ Load Center Indoor Knockout Diagrams
1-23
Circuit Breakers
Type QP, 1" Breakers
1-24
Type QT, 1/2" Breakers
1-25
Arc Fault and Ground Fault Breakers
1-26
Special Application Breakers
1-27
Type QD, 3/4" Breakers
1-28
Main and Branch Circuit Breakers
1-29
Circuit Breaker Dimension Drawings
1-30
Circuit Breaker Lug Data
1-31
Surge Protection Products
1-32 – 1-34
Load Center and Circuit Breaker Accessories
1-35 – 1-36
All-Sites Temporary Power Outlet Panels
1-37 – 1-38
Temporary Power Outlet Panels, Dimension Drawings
1-39 – 1-45
™
Residential Commercial Industrial
LOAD CENTERS &
CIRCUIT BREAKERS
EQ® and Ultimate Limited Warranty Program
®
EQ and Ultimate Load Centers
Limited Warranty Program
General
LOAD CENTERS &
CIRCUIT BREAKERS
1
Siemens Residential Circuit Breaker And Load Center Limited Warranty Program
I. Lifetime Limited Warranty on
Branch Circuit Breakers (15-225A)
Siemens warrants its type QP, QPH,
QPP, QT (twin), and HQP branch circuit
breakers to be free from defects in
material and workmanship under normal
care and proper usage in a domestic
residential installation, for the lifetime of
the Siemens load center in which it is
installed. If the circuit breaker fails within
the warranty period because of a defect
in material or workmanship, Siemens will
replace the inoperative breaker free of
charge upon return to place of purchase.
II. Ten Year Limited Warranty on
EQ and Ultimate Load Centers
(100-225A)
Siemens warrants its type EQ and
Ultimate factory installed main breaker
and main lug single phase load centers,
when used with Siemens circuit breakers
described in item I, above, to be free
from defects in material and
workmanship under normal care and
proper usage in a domestic residential
installation, for a period of 10 years from
the date of installation. If the load center
fails within the warranty period because
of a defect in material or workmanship,
Siemens will, at its option, repair or
replace the inoperative part or parts
upon return to the place of purchase.
III. This warranty applies to the
items described in I. and II. above,
which were purchased and installed
after February 1, 1994.
IV. Additional Information
Notice requirements and limitations
applicable to Siemens warranties are:
A. Siemens must be given prompt
notice of any defect or failure of any
product covered by the warranty. Notice
must be accompanied by verification of
date of purchase or installation.
1-2
B. Any product authorized for return by
Siemens, or its authorized distributors,
under this warranty must be sent freight
costs prepaid. Siemens will deliver
repaired or replaced products to the buyer,
freight costs prepaid. Repaired or replaced
products shall be warranted for the
unexpired portion of the warranty period.
C. Any warranties granted or liabilities
assumed hereunder will not apply to
products that have been damaged,
altered, repaired or operated otherwise
than in conformity within the
requirements for safe operation
and maintenance.
The Absolute
Confidence Warranty™
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
D. THERE ARE NO OTHER
WARRANTIES WHICH EXTEND
BEYOND THOSE EXPRESSLY SET
FORTH HEREIN AND THIS WARRANTY
AND SIEMENS’ OBLIGATIONS AND
LIABILITIES HEREUNDER ARE IN LIEU
OF, AND SIEMENS DISCLAIMS ALL
OTHER WARRANTIES AND
GUARANTEES AND ALL OTHER
LIABILITIES THEREFORE EXPRESS
OR IMPLIED, ARISING BY LAW OR
OTHERWISE, INCLUDING WITHOUT
LIMITATION ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR OF FITNESS
FOR A PARTICULAR PURPOSE. IN NO
EVENT WILL SIEMENS BE LIABLE FOR
ANY OTHER DAMAGES, EITHER
DIRECT, INCIDENTAL,CONSEQUENTIAL
OR OTHERWISE.
E. With respect to products purchased
by consumers of the United States for
personal use, the implied warranties,
including but not limited to the warranties
of merchantability and of fitness for a
particular purpose, are not excluded
but are limited to the duration of the
applicable warranty period. Some states
do not allow limitations on the duration
of an implied warranty, so the above
limitation may not apply to buyer.
Similarly, some states do not allow the
exclusion or limitation of incidental or
consequential damages, so the above
exclusion or limitation may not apply to
buyer. This warranty gives buyer specific
legal rights, and buyer may also have
other rights which may very from state
to state.
F. This Warranty covers domestic
residential use of Siemens products
described in I. and II. above and excludes
any commercial applications.
®
EQ and Ultimate Load Centers
Series-Connected System
General
Single Family Homes
In single family homes, the available
fault current normally does not exceed
10,000 amperes. In this situation a
load center with a main and branch
breakers with interrupting ratings of
10kA, RMS symmetrical will satisfy
this Code requirement.
In some instances the available fault
current may exceed 10,000 amperes
but rarely will it exceed 22,000 amperes.
In these instances a load center with a
main circuit breaker with an interrupting
rating of 22kA RMS symmetrical would
be required. The branch breakers in
method one would be required to be
fully rated 22kA breakers while in
method two the branch breakers
could be 10kA breakers.
Apartments, Condominiums,
Commercial
In larger installations the available fault
current will normally be above 10,000
amperes so series combination ratings
become much more important. In these
installations it is not uncommon to
see three breaker series combinations.
An example would be 65kA available
with an 800 amp service disconnect
(MD6 rated 65kA) ahead of a 125 amp
feeder disconnect (QPH rated 22kA)
ahead of branch breakers in the load
center (QP rated 10kA).
Series ratings are a part of the rating
and marking of the equipment in which
the downstream breakers are installed.
Section 240.86 of the NEC requires this
marking to be on the equipment and the
only acceptable combinations in a given
device are those combinations marked
on the device.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
LOAD CENTERS &
CIRCUIT BREAKERS
The National Electrical Code states in
article 110.9:
110.9 Interrupting Rating. Equipment
intended to break current at fault levels
shall have an interrupting rating sufficient
for the system voltage and the current
which is available at the line terminals
of the equipment.
Equipment intended to break current
at other than fault levels shall have an
interrupting rating at system voltage
sufficient for the current that must
be interrupted.
There are two ways to satisfy this Code
requirement. Either method offers the
necessary protection but method two is
a less costly alternative to method one.
Method one is to select circuit breakers
with individual interrupting ratings equal
to or greater than the available fault
current at the service entrance.
Method two is to select circuit breakers
with a series combination rating equal to
or greater than the available fault current
at the service entrance.
1
How Series-Connected Circuit
Breakers Save Component Cost
1-3
Ultimate™ Load Centers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Features
The Siemens Ultimate Load Center is the highest quality, most
feature rich design in the industry. Features of the Ultimate Load
Center include:
1. The patented INSTA-WIRE™ neutral / ground system allows
for faster installation because the screws arrive backed out,
ready for wire insertion.
1
2
2. The patented Visible neutral / ground system aids in the
insertion of conductors.
3. All main lug devices are provided with a factory installed
ground bar.
4. Main lug and main breaker panels are provided with split
neutrals which can be isolated by removing a tie strap,
turning one side into a ground bar.
3
5. Inboard neutrals allow the installation of neutral and ground
conductors right next to the breaker.
6. Mounting tabs on the trim hold it in place on the load center,
freeing up both hands to drive the trim screws.
7. Combination head screws on the neutrals, grounds, trim,
upper pan, and bond screw provide installation flexibility.
8. The patented pre-positioned bond screw eliminates bond
strap / screw assemblies, and reduces the risk of losing
components in the field.
4
5
6
7
8
9. All devices are convertible from main lug to main breaker or
vice versa with the addition of main breaker or main lug kits.
10. All main breakers are straight in wired – no back feeding
required.
11. A rigid, sturdy base pan provides the ruggedness required
the most harsh applications.
12. The outdoor enclosure has a slide hinge door for the easiest
of installation and can be removed by backing out only one
screw.
13. All indoor Ultimate Load Centers are invertible for bottom
feed applications.
14. Indoor load center trims are now available in white.
11
1-4
10
9
12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13
Ultimate™ Load Centers
Product Offering
1
LOAD CENTERS &
CIRCUIT BREAKERS
The Ultimate Load Center product line provides a wide array of variation to meet any application need.
The following offereing is available in the Ultimate
product line:
▪
▪
▪
▪
▪
▪
▪
12-42 Circuits / Spaces
Indoor and outdoor enclosures
100 to 225 Amp
Main lug and main breaker
Two different main lug configurations (see below)
Gray or white trim colors
Value packs – a mix of branch breakers provided
with the load center
Main Breaker Panel
Other load centers outside the Ultimate product line
include:
▪
▪
▪
▪
▪
▪
Circuit breaker enclosures
Small circuit (2-10) load centers
Riser panels for high rise applications
3-Phase load centers
High amp load centers (400A)
Specialty load centers (generator standby panels,
spa panels, renovation panels, and trailer panels)
Standard main lug panel with
two split neutrals and a factory bonded ground bar (far left)
“SG” style main lug panel with
an isolated neutral (right) and
factory bonded ground bar (left)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-5
®
EQ and Ultimate Load Centers
Catalog Numbering System
Reference
LOAD CENTERS &
CIRCUIT BREAKERS
1
Catalog Numbering System
G
12
24
MB
1
100
S
CU
䊱
䊱
䊱
䊱
䊱
䊱
䊱
䊱
Type Enclosure or Component
E
G
W
I
R
=
=
=
=
=
Indoor Type 1 2-10 and 30-42 circuits 300-400Amp
Indoor Type 1 12-42 circuits
Outdoor Type 3R
Interior
Riser
Spaces
Maximum number of 1" breakers
Circuits
Maximum number of circuits
Type of Main
ML or L = Main Lug
MB or B = Main Breaker
MC = Convertible
System
1 = 1-Phase, 3-Wire
3 = 3-Phase, 3-Wire or
3-Phase, 4-Wire
Main Ampere Rating
Ex:100 = 100 Amps
Trim / Others
Blank
S
F
T
G or GB
=
=
=
=
=
Combination
Surface
Flush
Feed-Thru Lugs
Ground Bar Factory Installed
Type of Bus Bar
Blank
C or CU
CP
= Aluminum
= Copper
= Copper Bus, Value Pack
Products Shown In Sections 1 and 2
Of This Speedfax Meet Or Exceed
The Following Standards.
▪ UL50 — Electric Cabinets and Boxes
▪ UL67 — Electric Panelboards
▪ UL414 — Meter Sockets
▪ UL486 — Wire Connectors
▪ UL489 — Molded-Case Circuit Breakers
▪ UL869 — Service Equipment
▪ UL943 — Ground Fault interrupters
(Class A — Personnel Protection)
▪ Federal Specification W-P-115b —
Panel Power Distribution
▪ Federal Specification W-C-375B —
Circuit Breakers
▪ NEC
▪ NEMA 250
1-6
Underwriters’ Laboratories, Inc.
Reference File Numbers:
▪ EQ Meter Combinations (complying with
EUSERC specifications) are Listed by UL
under file #E10703
▪ Uni-Pak (complying with EUSERC
specifications) are Listed by UL under
file #E10703
▪ Underground pull box (complying with
EUSERC specifications) are Listed by UL
under file #E10703
▪ Series Connected Circuit Breaker
Information is recognized by UL under
file #E10848(N)
▪ Pushmatic Circuit Breakers are Listed by
UL under file #E10848
▪ EQ Load Centers, Uni-Pak and
Modular Metering are Listed by UL
under file #E10703
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
▪ EQ Load Centers, Uni-Pak and Modular
Metering Accessories are UL recognized
components found under file #E10703,
Volume 6 and 7. (Also referenced under
the recognized components directory —
section QEUY2)
▪ EQ Circuit Breakers are Listed by UL
under file #E82615
▪ Modular metering disconnects are
Listed by UL under file #E25506
▪ EQ Main Lug Load Centers (where
noted) and accessories are Certified by
CSA under file #LL85900
The Ultimate Load Centers
Single Phase Main Lug and Main Breaker Load Centers
Main Breaker/Convertible Load
Selection
Centers
Indoor Enclosure — NEMA Type 1
Max. Aluminum Bus
List
2-Pole Catalog Number Price $
Copper Bus
Catalog Number
List
Price $
Enclosure
Height
(inches)
6
8
10
12
14
12
8
10
12
14
4
10
12
14
20
21
G1224B1100CU
G1624B1100CU
G2020B1100CU
G2424B1100CU
G3030B1100CU
—
—
G2030B1150CU
—
G3030B1150CU
—
G2040B1200CU
—
G3040B1200CU
G4040B1200CU
G4242B1225CU
499.00
546.00
581.00
668.00
733.00
—
—
1007.00
—
1093.00
—
1007.00
—
1223.00
1429.00
1697.00
18
21
24
24
30
—
24
30
30
36
—
30
30
36
39
42
G1224B1100
G1624B1100
G2020B1100
—
—
G2424B1125
G1630B1150
G2030B1150
G2430B1150
G3030B1150
—
G2040B1200
G2440B1200
G3040B1200
G4040B1200
—
NEW
463.00
499.00
520.00
—
—
627.00
863.00
946.00
986.00
1016.00
—
946.00
1004.00
1149.00
1308.00
—
Outdoor Enclosure — NEMA Type 3R
Enclosure
Copper Bus
List
Height
Catalog Number
Price $
(inches)
W1224B1100CU
W1624B1100CU
W2020B1100CU
—
—
—
—
—
—
—
W0816B1200CT
W2040B1200CU
—
W3040B1200CU
W4040B1200CU
W4242B1225CU
602.00
616.00
642.00
—
—
—
—
—
—
—
925.00
1076.00
—
1366.00
1534.00
1793.00
21
23
29
—
—
—
—
—
—
—
27
29
—
35
38
42
Single phase factory installed 22kA IR main circuit breaker offers 22/10kA IR series combination rating when using 10kA IR Type QP, QT, QPF, QE, QN and QAF branch breakers.
Main Lug/Convertible Load Centers
Aluminum or Copper Bus
60/75°C Rated 100,000A IR
12-42 Circuits / 125-225 Amperes
Branch Circuits
Main
Ampere Max No. of 1-Pole
Rating Spaces Circuits
1-Phase, 3-Wire SN
125
12
12
125
12
24
125
16
24
125
20
20
125
24
24
125
24
40
125
30
40
125
40
40
150
20
30
200
8
16
200
12
24
200
20
40
200
24
40
200
30
30
200
30
40
200
40
40
225
12
24
225
42
42
Indoor Enclosure — NEMA Type 1
Max. Aluminum Bus
List
2-Pole Catalog Number Price $
6
6
8
10
12
12
14
20
10
4
6
10
12
14
14
20
6
21
G1212L1125
G1224L1125
G1624L1125
G2020L1125
G2424L1125
—
—
—
G2030L1150
—
—
G2040L1200
G2440L1200
G3030L1200
G3040L1200
G4040L1200
—
—
194.00
253.00
309.00
361.00
410.00
—
—
—
437.00
—
—
532.00
563.00
545.00
605.00
905.00
—
—
Copper Bus
Catalog Number
List
Price $
G1212L1125CU
230.00
G1224L1125CU
290.00
G1624L1125CU
358.00
G2020L1125CU
424.00
—
—
G2440L1125CU
470.00
G3040L1125CU
534.00
G4040L1125CU NEW
—
G2030L1150CU
486.00
—
—
G1224L1200CU
424.00
G2040L1200CU
591.00
G2440L1200CU
624.00
G3030L1200CU
627.00
G3040L1200CU
681.00
G4040L1200CU
1004.00
—
—
G4242L1225CU
1029.00
Enclosure
Height
(inches)
21
21
21
24
30
30
30
39
30
—
24
30
30
36
36
39
—
42
Outdoor Enclosure — NEMA Type 3R
Enclosure
Copper Bus
List
Height
Catalog Number
Price $
(inches)
W1212L1125CU
302.00
W1224L1125CU
379.00
W1624L1125CU
463.00
—
—
W2424L1125CU NEW 560.00
—
—
W3040L1125CU
685.00
—
—
W2030L1150CU
595.00
W0816L1200CT
494.00
W1224L1200CU
518.00
W2040L1200CU
705.00
—
—
—
—
W3040L1200CU
778.00
W4040L1200CU
1086.00
W1224L1225CU NEW 685.00
W4242L1225CU
1411.00
SG Series Main Lug/Convertible Load Centers
Aluminum or Copper Bus
60/75°C Rated 100,000A IR
12-40 Circuits / 125-200 Amperes
Branch Circuits
Main
Ampere
Max No. of 1-Pole
Rating
Spaces
Circuits
1-Phase, 3-Wire SN
125
12
24
125
16
24
125
20
30
125
24
30
150
20
30
200
30
40
200
40
40
Suitable for use as service entrance equipment.
May be installed on higher rated systems when
protected by a circuit breaker with a higher AIR rating.
See equipment markings.
Indoor enclosures are 14 5/16" wide by 3 15/16" deep.
Outdoor enclosures are 14 1/2" wide by 4 1/4" deep.
125A load centers will accept MBK100A and MBK125A
150A load centers will accept MBK150A
200A load centers will accept MBK150A and MBK200A
225A load centers will accept MBK150A, MBK200A, and
MBK225A.
Discount Schedule RESI
21
21
23
—
27
—
35
—
29
27
27
29
—
—
35
38
29
42
Indoor Enclosure — NEMA Type 1
Max.
2-Pole
Copper Bus
Catalog Number
List
Price $
Enclosure
Height
(inches)
6
8
10
12
10
14
20
G1224L1125CUSG
G1624L1125CUSG
G2030L1125CUSG
G2430L1125CUSG
G2030L1150CUSG
G3040L1200CUSG
G4040L1200CUSG
290.00
358.00
424.00
433.00
486.00
681.00
1004.00
21
24
24
30
30
36
39
Suitable for use as service entrance equipment when not
more than six main disconnecting means are provided
and when not used as a lighting and appliance branch
circuit panelboard. See article 408.14 of the NEC®.
Factory installed 100% neutral with factory bonded
100% ground. No neutral tie strap.
All 225 amp load centers are provided with tin plated
copper bus bars.
Copper bus load centers are recommended for those
applications where the environment may be severe (i.e.
farm and coastal areas).
NEW Adding a “W” to the end of the load center catalog
number (example: G3040L1200CUW) will change the trim
color to white. Slight price increase as well as a 2-3 week
lead time required. Pallet quantities only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-7
LOAD CENTERS &
CIRCUIT BREAKERS
Branch Circuits
Main
Ampere Max No. of 1-Pole
Rating Spaces Circuits
1-Phase, 3-Wire SN
100
12
24
100
16
24
100
20
20
100
24
24
100
30
30
125
24
24
150
16
30
150
20
30
150
24
30
150
30
30
200
8
16
200
20
40
200
24
40
200
30
40
200
40
40
225
42
42
1
Aluminum or Copper Bus
60/75°C Rated 22,000A IR
12-42 Circuits / 100-225 Amperes
The Ultimate Load Centers
Value Pack Load Centers햳
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
햴
Value pack load centers offer a standard load center and an assortment of branch breakers . The offering of value packs and the breakers
included are listed in the table below.
Catalog Number
Load Center
Breakers Included
G2020B1100CP
G3030B1100CP
G1224L1125CP
G1624L1125CP
G3030B1150CP
G3040B1200CP
G3040B1200CPP
G3040L1200CP
G3040L1200CPP
G3040L1200CP1
G4040B1200CP
G4040B1200CPP
G4040B1200CP1
G4040B1200CUSGP
G4040L1200CPP
W3040B1200CP
W3040L1200CP
W4040B1200CP
W4040L1200CP
G2020B1100CU
G3030B1100CU
G1224L1125CU
G1624L1125CU
G3030B1150CU
G3040B1200CU
G3040B1200CU
G3040L1200CU
G3040L1200CU
G3040L1200CU
G4040B1200CU
G4040B1200CU
G4040B1200CU
G4040L1200CUSG
G4040L1200CU
W3040B1200CU
W3040L1200CU
W4040B1200CU
W4040L1200CU
(6) Q120
(6) Q120, (6) Q115
(6) Q120
(6) Q120
(6) Q120, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q240
(6) Q120, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q240
(6) Q120, (6) Q115, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q240
(6) Q115, (6) Q120, (1) Q230, (1) Q250
MBK200A햲, (6) Q120, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q240
(6) Q120, (6) Q115, (1) Q230, (1) Q250
(6) Q120, (6) Q115, (1) Q230, (1) Q250
(6) Q120, (6) Q115, (1) Q230, (1) Q250
(6) Q120, (1) Q230, (1) Q250
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
List Price $
659.00
900.00
432.00
468.00
1323.00
1415.00
1415.00
928.00
964.00
1061.00
1631.00
1429.00
1759.00
1698.00
1004.00
1613.00
1025.00
1780.00
1331.00
Ultimate Load Center Accessories햶
Catalog Number
Description
ECHS000
ECHS075
ECHS100
ECHS125
ECHS150
ECHS200
ECHS250
ECGB5
ECGB10
MBK100A햷
MBK125A햷
MBK150A햷
MBK200A햷
MBK225A햷
ECLKB1햸
ECLK1-2
ECLK2
ECQFL2
ECCP1
ECTS2
ECQF3
Hub cover plate
3
⁄4" Hub
1" Hub
11⁄4" Hub
11⁄2" Hub
2" Hub
21⁄2" Hub
5 pos ground bar
10 pos ground bar
100A main breaker kit
125A main breaker kit
150A main breaker kit
200A main breaker kit
225A main breaker kit
2/0 lug kit with bonding means for Ultimate load centers
#2-1/0 neutral lug
#4-2/0 neutral lug
Door lock
Directory cards
Trim screws
Filler plates
Notes:
햲 MBK200A factory installed.
햳 All value packs provided with copper bus bars.
햴 Breakers are shipped inside a sleeve located in the load
center.
햵 “New” items to be available Spring 2007.
햶 See accessory pages at end of section for complete
accessory listing.
햷
MBK100A only for use on 100 or 125A load centers /
MBK125A only for use on 125A load centers /
MBK150A only for use on 150A, 200 or 225A load centers / MBK200A only for use on 200 or 225A load centers / MBK225A only for use on 225A load centers.
햸
List Price $
Pack Qty.
38.00
39.50
39.50
39.50
39.50
69.00
109.00
18.40
21.00
230.00
473.00
588.00
588.00
588.00
26.50
13.90
18.40
89.00
616.00
9.80
14.20
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
100
6
5
ECLKB1 installed on left side neutral bar when the tie
strap is removed. A tang is provided allowing that lug
and neutral assembly to be bonded to the enclosure.
Ultimate Load Center Lug Data
Terminals
A, B, N 햲
A, B, N 햳
,G
Neutral-Ground Bars
(Use Type GB Ground Bar
Accessory Kit)
Ground Conductors Only
Main Lug/Main Breaker to
Bus Connection (1/4-20 nut)
Bonding Screw
햲
햳
Wire
300 kcmil-4 AWG
2/0-4 AWG
10–14 Cu/10–12 Al
8 AWG
6–4 AWG
(2) or (3) 14 AWG
(2) 12–10 AWG
Torque
275 lb.-ins.
110 lb.-ins.
20 lb.-ins.
25 lb.-ins.
35 lb.-ins.
20 lb.-ins.
20 lb.-ins.
45 lb.-ins.
45 lb.-ins.
150, 200 & 225 amp load centers.
100 & 125 amp load centers.
1-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
®
EQ Load Centers
Small Circuit Load Centers
Selection/Wiring Diagrams
1
100,000A IR
LOAD CENTERS &
CIRCUIT BREAKERS
4–16 circuits, 100–125 Amperes
1-Phase, 3-Wire, SN 120/240 Volts AC
Features/Applications
EQ Load Centers with main lugs feature a combination trim box in one package.
▪ Interiors offer removal in seconds
▪ Single phase
▪ One piece bus bar construction designed
for use only with circuit breakers
▪ UL Listed
▪ UL listed on 60/75°C conductors
(see equipment markings for applications)
▪ Positive load side circuit breaker hook rails
▪ Outdoor Type 3R devices use HS Type
hubs
E0408ML1125(F,S)
E0816ML1125(F,S)CU
Main Lugs with Aluminum Bus 햷
Branch Circuits
Indoor Enclosure — NEMA Type 1
Outdoor Enclosure — NEMA Type 3R
Max.
1-Pole
QP
Amp No. of No. of Max.
Rating Spaces Circuits 2-Poles
Catalog Number —
Replace Suffix F
(Flush) with S for
Surface Mounting
Dimensions
List
Std. (inches)
Price $ Pkg. H
W
Catalog
Number
100
12
24
6
E1224ML1100FG햲
261.00
1
14 3/4 12 3/8 3 7/8 —
125
4
8
2
E0408ML1125F 햳햵햶
81.00
5
12 5/8 6 5/8 3 1/2 W0408ML1125 햳햴햵
125
4
8
2
—
—
— —
—
—
125
4
8
2
—
—
— —
—
—
125
8
16
4
E0816ML1125F 햶
145.00
1
D
Dimensions
Std. (inches)
Pkg. H
W
D
—
—
—
—
150.00
5
12 1/4
6
4 1/4
W0408L1125SPA50 햴햵햹
600.00
1
12 1/4
6
4 1/4
W0408L1125SPA60 햴햵햹
630.00
1
12 1/4
6
4 1/4
—
—
—
—
—
List
Price $
—
14 3/4 12 3/8 3 7/8 —
Main Lug and Main Breaker with Copper Bus 햷햺
100,000A IR
4–16 circuits, 100–225 Amperes
1-Phase, 3-Wire, SN 120/240 Volts AC
Features
Branch Circuits
Indoor Enclosure — NEMA Type 1
Max.
1-Pole
QP
Amp No. of No. of Max.
Catalog
Rating Spaces Circuits 2-Poles Number
List
Price $
Outdoor Enclosure — NEMA Type 3R
Dimensions
Std. (inches)
Pkg. H
W
D
Catalog
Number
List
Price $
Dimensions
Std. (inches)
Pkg. H
W
D
—
100
10
20
4
E1020MB1100FCGP 햸 햽 494.00
1
14 3/4 12 3/8 3 7/8 —
100
12
24
6
E1224ML1100FCU
265.00
1
14 3/4 12 3/8 3 7/8 —
—
125
8
16
4
E0816ML1125FCU햶
158.00
1
14 3/4 12 3/8 3 7/8 W0816ML1125CU햶
264.00
125
8
16
4
E0816ML1125SCU
154.00
1
14 3/4 12 3/8 3 7/8 —
—
—
—
—
225
4
6
2
—
—
1
—
—
—
W0406ML1225CU햳
396.00
1
23
10
4 1/8
200
4
4
2
—
—
1
—
—
—
W0404MB1200CT햻햽
823.00
1
20
11 1/8 4 3/4
—
—
—
—
—
—
—
—
—
1
14 3/4
12 1/8 4 1/4
Wiring Diagrams
E0816ML1125
W0816ML1125CU
16-Poles Max.
E0408ML1125
W0408ML1125
8-Poles Max.
햲
햳
70 amp maximum breaker.
Will not accommodate 2-pole GFCI or circuit breaker with
shunt trip.
햴 Suitable for use as service equipment when a main breaker
(100A maximum) is back-fed in a branch position and used
with main breaker retainer clip (Cat. No. ECMBR1).
햵 100 amp maximum breaker.
Discount Schedule RESI
햶
E1224ML1100FG
24-Poles Max.
Suitable for use as service entrance equipment when a main
breaker (125A maximum) is back-fed in a branch position and
used with main breaker retainer clip (Cat. No. ECMBR1).
햷 Suitable for use as service entrance when not more than six
main disconnecting means are provided, and when not used as
lighting and appliance branch circuit panelboard. Check local
codes and restrictions.
햸 Two Q115 and one Q230 breaker included.
햹
W0408L1125SPA50 provided with factory installed QF50 and
ground bar. W0408L1125SPA60 provided with factory installed
QF260 and ground bar.
햺 Copper Bus load centers are recommended for those
applications where the environment may be severe
(i.e. farm and coastal areas).
햻 2" HS Type hub provided.
햽 Type QNR main breaker factory installed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-9
®
EQ Load Centers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Circuit Breakers Enclosures
Selection/Wiring Diagrams
E0303ML3100CU
W0202MB1200CU
Features
▪ Circuit breaker enclosures range from 60A to
225A, indoor and outdoor models
▪ Designed for use exclusively with QP, QT,
QPH, HQP, BQ, BQH, HBQ, QPP, QPPH,
HQPP, QJ2, QJH2 and QJ2-H circuit breakers
▪ UL listed
▪ Suitable for use as service entrance
equipment
▪ UL listed for 60/75°C conductors
(See equipment markings for applications)
Breaker Used
Frame
Type
Indoor Enclosure — NEMA Type 1
Ampere No. of Catalog
Rating Poles Number
List
Price $
Outdoor Enclosure — NEMA Type 3R
Std.
Pkg.
Dimensions (inches)
Catalog
Height Width Depth Number
List
Price $
Std. Dimensions (inches)
Pkg. Height Width Depth
W0204ML1060 햲
—
W0202MB1100CU 햵
W0204ML1125CU
141.00
—
364.00
189.00
5
—
1
1
18
—
17.4
17 1/8
15
—
7.3
17 3/8
4 1/4
—
4.3
4 5/16
1-Phase, 3-Wire SN — 120/240 Volts AC
QP, QPH,
HQP
60
60
100
125
2
2
2
E0204ML1060S 햲
E0204ML1060F 햵
E0202MB1100 NEW
E0204ML1125SCU
76.00
116.00
306.00
121.00
5
5
1
1
9
9
17
17
QN, QNH,
HQN
200
200
2
2
—���
E0202MB1200 NEW
—
718.00
—
—
—
19 3/8
—
8 1/2
—
4
W0202ML1200CU
W0202MB1200CU 햵
468.00
902.00
1
1
19 3/4
19 3/4
18.4
18.4
4.6
4.6
QPP, QPPH,
HQPP, QP
225
1-4
—
—
—
—
—
—
W0406ML1225CU 햳
396.00
1
23
10
4 1/8
QJ2,
QJH2,
QJ2-H
150
200
225
2
2
2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
WB2150B 햶
WB2200B 햶
WB2225 햳
949.00
949.00
418.00
1
1
1
27
27
27
17 3/8
17 3/8
17 3/8
4 15/16
4 15/16
4 5/16
7/8
7/8
1/8
1/8
5
5
7
7
1/8
1/8
3/8
1/8
2
2
4
4
5/8
5/8
5/16
1/4
3-Phase, 3-Wire 240 Volts AC or 3-Phase, 4-Wire SN — 120/208 Volts AC, 120/240, 240 Volts AC
2-3
E0303ML3100S 햴
189.00
1
17 1/8
7 1/8
4 1/4
W0303ML3100 햴
249.00
1
17 1/8
17 3/8
4 5/16
BQ, BQH, HBQ 100
2-3
EB3100S 햴
189.00
1
17 1/8
7 1/8
4 1/4
WB3100 햴
249.00
1
17 1/8
17 3/8
4 5/16
QJ2, QJH2,
QJ2-H
2-3
EB3225F 햳
226.00
1
27111
10 1/8
5 1/8
WB3225 햳
459.00
1
27
10 1/8
5 9/16
QP, QPH,HQP 100
햲
햳
225
Will not accommodate 2-pole GFCI or circuit breaker with
shunt trip.
42,000A IR maximum. Copper wire only at 225A.
햴
햵
Will not accommodate GFCI or circuit breaker with shunt
trip.
Main breaker factory installed.
햶
QJ2 frame circuit breaker installed, rated 10,000A IR.
Wiring Diagrams
1-Phase, 3-Wire
3-Phase, 4-Wire
E0303ML3100CU
EB3100
W0303ML3100CU
WB3100
EB3225
WB3225
2 or 3-Pole
E0204ML1060
W0204ML1060
1 or 2-Poles
1-10
E0204ML1125FCU
W0204ML1125CU
1 or 2-Poles
WB2225
One 2-Pole
W0406ML1225CU
1 or 2-Poles
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
®
EQ Load Centers
3-Phase Main Breaker with Copper Bus햵햶
Selection
10,000A IR 햲 햴
1
LOAD CENTERS &
CIRCUIT BREAKERS
30–42 Circuits, 100–225 Amperes
3-Phase, 3-Wire, 240 Volt AC — or — 3-Phase, 4-Wire
120/240 – or – 120/208 Volts AC
W3042L3200CU
G3042B3200CU
Branch Circuits
Indoor Enclosure — NEMA Type 1
Max.
Ampere 1-Pole No. No. of Max.
Catalog
Rating of Spaces Circuits 2-Poles Number
Outdoor Enclosure — NEMA Type 3R
List
Prices $
Dimensions
(inches)
Height Width Depth
Catalog
Number
List
Prices $
Dimensions
(inches)
Height Width Depth
100
30
30
14
G3030B3100CU햳
1288.00
30
14 3/8 3 15/16 —
—
—
—
150
24
42
14
G2442B3150CU
2112.00
36
14 3/8 3 15/16 W2442B3150CU
2301.00
34
14 1/4 4 1/2
200
30
42
14
G3042B3200CU
2209.00
36
14 3/8 3 15/16 W3042B3200CU
2393.00
37
14 1/4 4 1/2
200
42
42
20
G4242B3200CU
2326.00
42
14 3/8 3 15/16 W4242B3200CU
2639.00
43
14 1/4 4 1/2
225
42
42
20
G4242B3225CU
2326.00
42
14 3/8 3 15/16 W4242B3225CU
2639.00
43
14 1/4 4 1/2
햲
햳
May be installed on higher rated systems when protected
by a circuit breaker with a higher A IR rating.
See equipment markings.
Back-fed main breaker.
When 22,000 IR or 42,000 IR main circuit breakers are
required, add the suffix “-22” or “-42” respectively.
List price adder applies.
햵 Standard Package Quality = 1.
햶
—
Copper bus load centers are recommended for those
applications where the environment may be severe
(i.e. farm and coastal areas) or where a premium
panel is desired.
3-Phase Main Lug with Copper Bus햴햵
100,000A IR
12–42 circuits, 125–225 Amperes
3-Phase, 3-Wire, 240 Volt AC — or — 3-Phase, 4-Wire SN
120/240 – or – 120/208 Volts AC
Branch Circuits
Indoor Enclosure — NEMA Type 1
Outdoor Enclosure — NEMA Type 3R
Max.
Amp 1-Pole No.
Rating of Spaces
125
12
150
18
150
24
200
12
200
18
200
24
200
30
No. of
Circuits
24
36
42
24
36
42
42
Max.
2-Poles
6
9
12
6
8
12
14
Catalog
Number
G1224L3125CU햲햳
G1836L3150CU햲햳
G2442L3150CU햳
G1224L3200CU햳
G1836L3200CU
G2442L3200CU햳
G3042L3200CU햳
List
Price $
390.00
537.00
648.00
520.00
621.00
720.00
767.00
Dimensions
(inches)
Height Width
21
14 3/8
24
14 3/8
30
14 3/8
24
14 3/8
30
14 3/8
30
14 3/8
36
14 3/8
225
42
20
G4242L3225CU햳
977.00
42
햲
42
Suitable for use as service equipment when not more
than six main disconnecting means are provided and
when not used as a lighting and appliance branch circuit
panelboard. See article 408 of the NEC.
햳
햴
Depth
3 15/16
3 15/16
3 15/16
3 15/16
3 15/16
3 15/16
3 15/16
Catalog
Number
W1224L3125CU햲햳
W1836L3150CU햲햳
W2442L3150CU햳
W1224L3200CU햲햳
—
W2442L3200CU햳
W3042L3200CU햳
14 3/8 3 15/16 W4242L3225CU햳
Suitable for use as service equipment when a main
breaker (100A maximum) is back-fed in a branch position,
and used with main breaker retainer clip (Cat. No. MBR-1).
Standard Package Quantity = 1.
햵
List
Price $
532.00
685.00
859.00
666.00
—
859.00
909.00
Dimensions
(inches)
Height Width
21
—
25
14 1/4
28
14 1/4
22
14 1/4
—
—
31
14 1/4
34
14 1/4
1612.00
42
Depth
—
4 1/2
4 1/2
4 1/2
—
4 1/2
4 1/2
14 1/4 4 1/2
Copper bus load centers are recommended for those
applications where the environment may be severe
(i.e. farm and coastal areas) or where a premium
panel is desired.
Lug Data
3-Phase Load Centers
Terminals
A, B, C
N햲
A, B, C & N 햴
N햳
G햲
Branch Breakers
Type “LK” Subfeed Lug Kit
햲
햳
Wire
See Marking on Breaker
250 kcmil-4 AWG
300 kcmil-6 AWG
2/0-4 AWG
2/0-4 AWG
See Marking on Breaker
See Marking on Lug Kit
150, 200 & 225 amp load centers.
100 & 125 amp load centers.
Discount Schedule RESI
Torque
340
340
135
45
lb.-ins.
lb.-ins.
lb.-ins.
lb.-ins.
Terminals
Neutral-Ground
(Use Type GB Ground Bar
Kit Accessory)
Ground Conductors Only
LK1-2 (Accessory)
LK2 (Accessory)
LK3 (Accessory)
햴
Wire
14 –10 AWG
8 AWG
6 AWG
4 AWG
(2) or (3) 14–10 AWG
2/0-2 AWG
2/0-4 AWG
300 kcmil-1 AWG
Torque
20 lb.-ins.
25 lb.-ins.
35 lb.-ins.
45 lb.-ins.
20 lb.-ins.
45 lb.-ins.
135 lb.-ins.
340 lb.-ins.
Main lug load centers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-11
®
EQ Load Centers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Main Breaker햲
Selection
E3030MB1400SCU
300– 400 Ampere
Features
▪ UL listed for 60/75°C conductors.
See equipment markings for applications.
▪ Copper bus standard.
▪ Factory installed lock on indoor enclosure.
1ø, 3-Wire
120/240 Volts AC
Branch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR)햳
Type QP
Ampere
Rating
300
300
400
400
400
Max.
1-Pole
42
42
30
42
42
Max.
2-Poles
20
20
14
20
20
Catalog
Number 햴
E4242MB1300FCU
E4242MB1300SCU
E3030MB1400SCU
E4242MB1400FCU
E4242MB1400SCU
List
Price $
6263.00
6263.00
5751.00
6263.00
6263.00
Std.
Pkg.
1
1
1
1
1
Dimensions (inches)
Height Width Depth
58
20
6
58
20
6
52
20
6
58
20
6
58
20
6
Outdoor Enclosure — NEMA Type 3R (22,000A IR)햳
Trim
Style
Flush
Surface
Surface
Flush
Surface
Catalog
Number
—
—
W3030MB1400CU
W4242MB1400CU
—
List
Price $
—
—
6800.00
7408.00
—
Std.
Pkg.
—
—
1
1
—
Dimensions (inches)
Height Width Depth햵
—
—
—
—
—
—
52
20
6
58
20
6
—
—
—
3ø, 3-Wire
240 Volts AC — or — 3-Phase, 4-Wire SN, 120/208 Volts AC
Branch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR)햳
Type QP
Ampere
Rating
300
400
400
400
Max. Max.
1-Pole 2-Poles
42
20
30
14
42
20
42
20
Catalog
List
Number 햴
Price $
E4242MB3300SCU 6601.00
E3030MB3400SCU 5956.00
E4242MB3400FCU 6601.00
E4242MB3400SCU 6601.00
Std.
Pkg.
1
1
1
1
Dimensions (inches)
Height Width Depth
58
20
6
52
20
6
58
20
6
58
20
6
Outdoor Enclosure — NEMA Type 3R (22,000A IR)햳
Trim
Style
Surface
Surface
Flush
Surface
Catalog
Number
—
—
W4242MB3400CU
—
List
Price $
—
—
7672.00
—
Std.
Pkg.
—
—
1
—
Dimensions (inches)
Height Width Depth햵
—
—
—
—
—
—
58
20
6
—
—
—
Main Lug
400 Ampere
1ø, 3-Wire
120/240 Volts AC
Branch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR)
Type QP
Ampere
Rating
400
400
400
400
Max. Max.
Catalog
1-Pole 2-Poles Number 햴
24
12
—
30
14
E3030ML1400SCU
42
20
E4242ML1400SCU
42
20
E4242ML1400FCU
List
Price $
—
1871.00
2066.00
2066.00
Std.
Pkg.
—
1
1
1
Dimensions (inches)
Height Width Depth
—
—
—
41
20
6
47
20
6
47
20
6
Outdoor Enclosure — NEMA Type 3R (22,000A IR)
Trim
Style
—
Surface
Surface
Flush
Catalog
Number
W0606ML1400CU햶햷
W3030ML1400CU
—
W4242ML1400CU
List
Price $
2275.00
2590.00
—
2777.00
Std.
Pkg.
1
1
—
1
Dimensions (inches)
Height Width Depth햵
43
20
6
43
20
6
—
—
—
47
20
6
3ø, 3-Wire
240 Volts AC — or — 3-Phase, 4-Wire SN, 120/208 Volts AC
Branch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR)햳
Type QP
Ampere
Rating
400
400
400
햲
햳
햴
Max. Max.
1-Pole 2-Poles
30
14
42
20
42
20
Catalog
Number
E3030ML3400SCU
E4242ML3400FCU
E4242ML3400SCU
UL listed as suitable for use as service equipment.
65,000A IR on 600A.
Where noted suffix S = Surface, F = Flush.
1-12
List
Price $
2050.00
2134.00
2134.00
햵
햶
Std.
Pkg.
1
1
1
Dimensions (inches)
Height Width Depth
41
20
6
47
20
6
47
20
6
Outdoor Enclosure — NEMA Type 3R (22,000A IR)햳
Trim
Catalog
Style
Number
Surface —
Flush
W4242ML3400CU
Surface —
Does not include 2" rainhead overhang.
Accepts up to six QN style breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햷
List
Price $
—
2850.00
—
Std.
Pkg.
—
1
—
Dimensions (inches)
Height Width Depth햵
—
—
—
47
20
6
—
—
—
Suitable for use as service entrance equipment when not
more than six main disconnecting means are provided
and when not used as a lighting and appliance panelboard.
Discount Schedule RESI
Load Centers
Special Application Load Centers
Selection
1
Renovation Panel
These panels feature two back-fed main
breakers that are mechanically interlocked
to allow only one main breaker to be “on”
at a time. Additional branch circuit spaces
allow critical circuits to be controlled
through this panel.
Ideal for older home renovation projects
where the distance between the studs is
narrower than current construction practices.
The narrower panel eliminates the need to
‘notch’ out the existing studs.
Trailer Panels
Spa Panels
These feed-through panels are UL listed as
Service Equipment and are ideal for serving
mobile homes located on private lots. The
panels either have factory or field added main
breakers with subfeed lugs. Additional breaker
positions allow connection of external circuits
such as lights, pumps, etc.
Spa Panels are ideal for outdoor applications
requiring the use of ground fault protection,
such as hot tubs. A factory installed 2-Pole
GFCI breaker is provided, along with 2
extra circuits.
Spa Panels
Main
Amp
125
125
No. of
Spaces햶
2
2
Max.
Circuits
4
4
Catalog Number
W0408L1125SPA50햺
W0408L1125SPA60햻
Height
121⁄4
121⁄4
Dimensions햳
Width
Depth
161⁄8
41⁄4
161⁄8
41⁄4
List
Price $
600.00
630.00
Dimensions햳
Width
Depth
123⁄8
37⁄8
123⁄8
37⁄8
List
Price $
494.00
265.00
Renovation Panels - 3-Wire 120/240V AC
Main
Amp
100
100
No. of
Spaces햶
10
12
Max.
Circuits
20
24
Catalog Number
E1020MB1100FCGP햾
E1224ML1100FCU
Height
143⁄4
143⁄4
Standby Power Panels - 3-Wire 120/240V AC햿
Utility
Main
60
100
100
Generator No. of
Main
Spaces햶
60
12
60
12
60
12
Max.
Circuits
24
24
24
Indoor Type 1
Catalog Number
G1224B6060GC햷
G1224B10060GC햷
W1224B10060GC햸
Height
21
21
21
Dimensions햳
Width
Depth
143⁄8
4
3
14 ⁄8
4
3
14 ⁄8
4
List
Price $
758.00
945.00
1139.00
Outdoor햲 Trailer Panels - 120/240V AC 208Y/120V AC
Amps
Max
200
200
200
햲
햳
햴
햵
No. of
Spaces
4
8
8
Max.
Circuits
8
16
16
Indoor Type 1
Catalog Number
W0404MB1200CT햵햽
W0816L1200CT햴
W0816B1200CT햴햽
HS hub provision provided. Closure plate included.
Dimensions shown are representative of outside box
length, width, and depth and do not include allowances
for mounting bumps, endwalls, covers, hubs, or hardware protrusions. Dimensions are subject to change.
For Main breaker applications, field - add an MBK150A
or MBK200A.
W0404MB1200CT shipped with ECHS200 hub instead of
closure plate.
Discount Schedule RESI
햶
햷
햸
햹
햺
햻
Height
20
29
29
Dimensions햳
Width
Depth
111⁄8
43⁄4
1
14 ⁄4
41⁄2
141⁄4
41⁄2
Main Breaker
QN2200R
MBK
MBK200A
These branch breaker provisions are in addition to the
two factory installed main breakers.
Indoor Type 1 Enclosure.
Outdoor Type 3R Enclosure.
Two Q115 and one Q230 provided.
50 Amp, 2-pole GFCI breaker installed.
60 Amp, 2-pole GFCI breaker installed.
Factory
Field
Factory
햽
햾
햿
List
Price $
823.00
494.00
925.00
200A factory installed main breaker included.
100A factory installed main breaker included.
NEW
..........See
Standby Generator Section 17 for a complete
line of manual transfer interlock kits which can convert
most load centers and meter combinations into standby
power panels.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-13
LOAD CENTERS &
CIRCUIT BREAKERS
Standby Power Panels
EQ® Load Centers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Riser Panel Load Centers
Riser Panel Load Centers are ideal for high
rise applications. The shifted interior
provides room for conductors to pass
through the load center햲. The tap kits
allow the installer to tap off from those
conductors to power the panel.햳
Features
Selection
The Riser Gutter Tap Kit (ECRLK250)
allows the installer to tap off of the main
conductors, eliminating the need to cut
completely through the conductor. The tap
kit accepts 250-1/0 on the main conductor
side and 250-6 on the tap side. One
ECRLK250 comes with 3 lug kits.
▪ UL Listed
from main lug to main
▪ Convertible
breaker햴
▪ Easily removable interior
▪ Copper bus bars
The Riser Gutter (RAG24) is used to
convert any load center 24" or larger into a
riser panel.
Features
▪ UL Listed
▪ Single and 3-phase applications
▪ Compatible with any single or 3-phase
Siemens load center 24"
or higher
▪ Flush trim included
▪ Load center mounting hardware and pass
thru bushing included
▪ Catalog number — RAG24
Trim/Cover
RAG24
R2040ML1125CU
Door On
R2040ML1125CU
ECRLK250
Amp
Rating
Max 1-pole
No. of
Spaces
No. of
Circuits
QP Max.
2-Poles
Catalog Number
125
12
24
6
125
20
40
10
Notes:
1. The riser panels are single phase only, but can be fed
from single or 3-phase systems running through the
gutter trough area.
1-14
Dimensions
List Price $
H
W
D
R1224ML1125CU
465.00
18
141⁄4
4
R2040ML1125CU
550.00
24
141⁄4
4
2. Tap lug kits not included.
3. Use main breaker kit MBK125.
4. Use ECGB series of ground bars for field grounds.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
AC Disconnects
1-Phase, NEMA 3R Rated
Selection
1
LOAD CENTERS &
CIRCUIT BREAKERS
WN2060
WF2060PL
WN2060GFCI
WNAS2060GFCI
Steel AC Disconnects
Ampere
Rating
30
60
60
60
Disconnect
Type
Fused Pullout
Fused Pullout
Non-fused Pullout
Non-automatic Switch
Catalog Number
WF2030
WF2060
WN2060
WNAS2060
Horse Power
Rating
3
10
10
10
Height
71⁄4
9
71⁄4
71⁄4
Dimensions
Width
Depth
5
21⁄8
5
21⁄8
5
21⁄8
5
21⁄8
List
Price $
145.00
145.00
145.00
173.00
Pallet
Qty.
360
360
360
360
Catalog Number
WF2030PL
WF2060PL
WN2060PL
WN2060PLX
WNAS2060PL
Horse Power
Rating
3
10
10
10
10
Height
71⁄4
71⁄4
71⁄4
8
71⁄4
Dimensions
Width
Depth
5
21⁄2
5
21⁄2
5
21⁄2
53⁄4
31⁄2
5
21⁄2
List
Price $
221.00
221.00
201.00
211.00
201.00
Pallet
Qty.
216
216
360
288
360
Height
9
9
71⁄8
71⁄8
Dimensions
Width
Depth
61⁄8
53⁄16
1
6 ⁄8
53⁄16
53⁄4
53⁄16
53⁄4
53⁄16
List
Price $
471.00
471.00
436.00
471.00
Pallet
Qty.
112
112
144
144
Plastic AC Disconnects
Ampere
Rating
30
60
60
60 NEW
60 NEW
Disconnect
Type
Fused Pullout
Fused Pullout
Non-fused Pullout
Non-Fused Pullout
Non-automatic switch
Steel AC Disconnects with 15 Amp GFCI Receptacle
Ampere
Rating
30
60
60
60
Disconnect
Type
Fused Pullout
Fused Pullout
Non-fused Pullout
Non-automatic Switch
Catalog Number
WF2030GFCI
WF2060GFCI
WN2060GFCI
WNAS2060GFCI
Horse Power
Rating
3
10
10
10
Wire Range Table
Connector
Line
Load
Neutral
Equip. Grnd
Copper
Solid
Stranded
#14-8
#14-3
#14-8
#14-3
#12-8
#12-2
#12-8
#12-2
Aluminum
Solid
Stranded
#12-8
#12-3
#12-8
#12-3
#12-8
#12-2
#12-8
#12-2
Add a “BP” to the end of the catalog number to order in
pallet quantites, example: WN2060BP.
Accepts Class H Fuse
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-15
Load Centers
Load Center replacement and OEM Interiors
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
1ø: Small Circuit Main Lug Interiors
Amps
60
60
125
125
125
200
200
Catalog Number햳
I0204ML1125
I0303ML3100
I0408ML1125
I0816ML1125CU
I0816ML1125CUSP
I0202L1200
I1220L1200CT
Spaces
2
3
4
8
8
4
12
Dimensions
Height
Width
5.06
2.12
5.06
3.12
4.51
6.61
6.19
6.81
6.19
6.81
3.88
7.13
9.00
7.00
Circuits
2
3
8
16
16
4
20
List
Price $
31.50
59.00
57.00
109.00
109.00
67.00
165.00
W
W
H
H
Ultimate 1ø: High Circuit Main Lug Interiors with Neutral Bars햵
Amps
125
125
125
200
200
200
200
200
200
225
Catalog Number햳
I1224L1125CU
I1624L1125CU
I3040L1125CU
I0816L1200CT햵
I1224L1200CU
I1632L1200CU
I2040L1200CU
I3040L1200CU
I4040L1200CU
I4242L1225CU
Spaces
12
16
30
8
12
16
20
30
40
42
Dimensions
Height
Width
10.80
9.80
12.80
9.80
20.80
9.80
10.80
9.80
10.80
9.80
14.80
9.80
12.80
9.80
14.80
9.80
24.80
9.80
26.80
9.80
Circuits
24
24
40
16
24
32
40
40
40
42
List
Price $
132.00
154.00
198.00
165.00
188.00
202.00
231.00
343.00
376.00
496.00
I0204ML1125
Rock Solid
W
W
H
Rock Solid 1ø: High Circuit Main Lug Interiors (no neutrals)햵
Amps
125
125
125
125
200
200
200
200
200
225
Catalog Number햳
IR1224L1125
IR1632L1125
IR2040L1125CU
IR3040L1125
IR0816L1200TR햴
IR2040L1200CU
IR2440L1200
IR3040L1200CU
IR4040L1200CU
IR4242L1225CU
Spaces
12
16
20
30
8
20
24
30
40
42
Dimensions
Height
Width
10.80
7.40
12.80
7.40
14.80
7.40
20.80
7.40
10.80
7.40
14.80
7.40
16.80
7.40
20.80
7.40
24.80
7.40
26.80
7.40
Circuits
24
32
40
40
16
40
40
40
40
42
List
Price $
99.00
122.00
144.00
166.00
132.00
188.00
210.00
231.00
298.00
385.00
I1220L1200CT
W
Catalog Number햳
CTI2040L1200CU
CTI2440L1200CU
CTI3040L1200CU
3-PHASE
H
I0816ML1125CU
Ultimate 1ø: Parallel Lug Interiors with Neutral Bars
Amps
200
200
200
H
Spaces
20
24
30
Circuits
40
40
40
Dimensions
Height
Width
14.80
9.80
16.80
9.80
20.80
9.80
List
Price $
418.00
441.00
496.00
Spaces
12
12
18
24
30
42
Circuits
24
24
36
42
42
42
Dimensions
Height
Width
10.50
8.70
10.50
8.70
13.50
8.70
16.50
8.70
19.50
8.70
25.50
8.70
List
Price $
254.00
276.00
330.00
385.00
518.00
606.00
W
W
H
3ø: Main Lug Interiors
Amps
125
200
200
200
200
225
Catalog Number햳
I1224L3125CU
I1224L3200CU
I1836L3200CU
I2442L3200CU
I3042L3200CU
I4242L3225CU
H
Parallel Lug
I0408ML1125
Lug Data
W
Interior
I0204ML1060
I0303ML3100
I1224ML1100
I0408ML1125
I0816ML1125CU/CUSP
Ultimate
Ultimate
Rock Solid
Rock Solid
Three Phase
Three Phase
햲
햳
Amperage
60
100
100
125
60
125
200/225
125
200/225
125
200/225
Wire range
2/0 - 4 AWG
2/0 - 4 AWG
2/0 - 4 AWG
2/0 - 4 AWG
2/0 - 4 AWG
2/0 - 4 AWG
300 kcmil - 4
2/0 - 4 AWG
300 kcmil - 4
300 kcmil - 6
300 kcmil - 6
UL Recognized Components.
The letters “CU” in any catalog number represent copper
bus bars.
1-16
햴
햵
AWG
AWG
AWG
AWG
Torque
45 lb. - ins.
45 lb. - ins.
45 lb. - ins.
45 lb. - ins.
45 lb. - ins.
110 lb. - ins.
110 lb. - ins.
110 lb. - ins.
275 lb. - ins.
340 lb. - ins.
340 lb. - ins.
W
H
H
I0202L1200
Ultimate
Feed thru lugs provided.
Convertible to main breaker using the MBK main breaker
kits.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Ultimate Load Centers
Main Breaker Wiring Diagrams
Wiring Diagrams
2
29
30
G1630B1150
G1624B1100
G1624B1100CU
W1624B1100CU
LINE
LINE
N
G
2
39
40
EQPT GND
1
G2440B1200
G2440B1200CU
G2424B1100CU
LINE
BOND WHEN
REQUIRED
N
G
30
29
G3030B1100CU
40
G3040B1200
G3040B1200CU
W3040B1200CU
2
EQPT GND
39
1
EQPT GND
2
EQPT GND
1
EQPT GND
EQPT GND
G
G
NEUTRAL
NEUTRAL
NEUTRAL
2
EQPT GND
1
N
G
N
G
BOND WHEN
REQUIRED
NEUTRAL
LINE
BOND WHEN
REQUIRED
NEUTRAL
LINE
NEUTRAL
G2020B1100
G2020B1100CU
W2020B1100CU
NEUTRAL
24
NEUTRAL
23
G
EQPT GND
2
EQPT GND
20
19
1
EQPT GND
EQPT GND
G
NEUTRAL
NEUTRAL
NEUTRAL
EQPT GND
G
2
BOND WHEN
REQUIRED
N
N
1
BOND WHEN
REQUIRED
BOND WHEN
REQUIRED
NEUTRAL
LINE
NEUTRAL
1
EQPT GND
24
23
G1224B1100
G1224B1100CU
W1224B1100CU
G
NEUTRAL
2
BOND WHEN
REQUIRED
N
EQPT GND
24
1
EQPT GND
23
G
EQPT GND
2
NEUTRAL
NEUTRAL
1
EQPT GND
EQPT GND
G
NEUTRAL
N
LINE
BOND WHEN
REQUIRED
N
NEUTRAL
LINE
40
39
G4040B1200
G4040B1200CU
W4040B 1200CU
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-17
LOAD CENTERS &
CIRCUIT BREAKERS
BOND WHEN
REQUIRED
LINE
1
All load centers comply fully with NEC and UL requirements for Class CTL.
Single Main – 1-Phase, 3-Wire
Ultimate Load Centers
Wiring Diagrams
All load centers comply fully with NEC and UL requirements for Class CTL.
Single Main – 1-Phase, 3-Wire
G1212L1125
G1212L1125CU
2
23
G
24
1
2
23
24
G1224L1125
G1224L1125CU
W1224L1125CU
G1224L1200CU
W1224L1200CU
G1624L1125
G1624L1125CU
W1624L1125CU
LINE
LINE
A
N
B
NEUTRAL
N
NEUTRAL
NEUTRAL
1
LINE
A
EQPT GND
12
B
EQPT GND
11
G
EQPT GND
2
BOND WHEN
REQUIRED
EQPT GND
A
N
1
EQPT GND
G
B
EQPT GND
NEUTRAL
A
LINE
NEUTRAL
BOND WHEN
REQUIRED
LINE
NEUTRAL
LOAD CENTERS &
CIRCUIT BREAKERS
A
N
B
B
N
39
40
G2440L1200
G2440L1200CU
W2440L1200CU
G2424L1125
G2020L1125
G202061125CU
NEUTRAL
2
EQPT GND
NEUTRAL
24
23
1
EQPT GND
G
EQPT GND
20
2
NEUTRAL
19
G
1
EQPT GND
2
EQPT GND
1
NEUTRAL
NEUTRAL
N
EQPT GND
G
B
NEUTRAL
LINE
A
LINE
30
29
G3030L1200
G3030L1200CU
1-18
39
40
G3040L1200
G3040L1200CU
W3040L1200CU
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2
39
40
EQPT GND
2
EQPT GND
1
NEUTRAL
NEUTRAL
G
1
EQPT GND
N
EQPT GND
2
EQPT GND
1
B
G
EQPT GND
G
B
NEUTRAL
A
A
N
N
B
NEUTRAL
LINE
LINE
NEUTRAL
A
NEUTRAL
1
Main Lug Wiring Diagrams
G4040L1200
G4040L1200CU
W4040L1200CU
EQ Load Centers
3-Phase Load Center
Wiring Diagrams
N
G
N
G
N
LOAD CENTERS &
CIRCUIT BREAKERS
G3030B3100CU
G3042B3150CU
G3042B3200CU
W3042B3150CU
W3042B3200CU
G4242B3200CU
G4242B3225CU
W4242B3200CU
W4242B3225CU
N
A
B
C
G
MAIN BREAKER
POSITION WHEN REQ'D
4
MAIN BREAKER
POSITION WHEN REQ'D
18 16 14 12 10
MAIN BREAKER
POSITION WHEN REQ'D
30
28
26
24
22
20
N
G
A
B
C
8
6
N
G
A
B
C
2
G
MAIN BREAKER
POSITION WHEN REQ'D
N
A
B
C
MAIN BREAKER
POSITION WHEN REQ'D
N
G
A
B
C
Main Lug
Wiring Diagrams
G1224L3125CU
G1224L3200CU
W1224L3125CU
W1224L3200CU
1
A
B
C
A
B
C
Main Breaker
Wiring Diagrams
G2442L3150CU
G2442L3200CU
W2442L3150CU
W2442L3200CU
G1836L3150CU
W1836L3150CU
G3042L3200CU
W3042L3200CU
G4242L3200CU
G4242L3225CU
W4242L3200CU
W4242L3225CU
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-19
®
EQ Load Centers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Main Breaker 300-400 Amperes
Wiring Diagrams
Main Breaker
300-400 Amperes
Wiring Diagrams
E3030MB1400SCU
W3030MB1400CU
30-Poles Max.
E4242MB1300SCU
E4242MB1300FCU
E4242MB1400SCU
E4242MB1400FCU
W4242MB1400CU
42-Poles Max.
E3030MB3400SCU
30-Poles Max.
E4242MB3300SCU
E4242MB3400SCU
E4242MB3400FCU
W4242MB3400CU
42-Poles Max.
Main Lugs
400 Ampere
Wiring Diagrams
W0606ML1400CU
(6) 2-Poles Max.
1-20
E3030ML1400SCU
W3030ML1400CO
30-Poles Max.
E4242ML1400SCU
E4242ML1400FCU
W4242ML1400CU
42-Poles Max.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
E3030ML3400SCU
30-Poles Max.
E4242ML3400SCU
E4242ML3400FCU
E4242ML3400CU
42-Poles Max.
Ultimate Load Center
Indoor and Outdoor Enclosures
Knockout Diagrams
Indoor Main Breaker and Main Lug Enclosures
1
4 K.O.s For
0.25" Conduit
LOAD CENTERS &
CIRCUIT BREAKERS
2 K.O.s For
.038", 0.5", 0.75", 1",
1.25"
Conduit
10 K.O.s For
0.5", 0.75", 1"
Conduit
10 K.O.s For
1", 1.25", 2", 2.5"
Conduit
52 K.O.s For
0.5" Conduit
12 K.O.s For
.038", 0.5", 0.75"
Conduit
Outdoor Main Breaker and Main Lug Enclosures
HS Hub Provision
2 K.O.s For
1", .75", .5"
Conduit
2 K.O.s For
1.5", 1.25", 1"
Conduit
3 K.O.s For
2.5", 2", 1.5", 1.25", 1"
Conduit
15 K.O.s For .5"
Conduit
2 K.O.s For 1", .75", .5"
Conduit
4 K.O.s For .75", .5"
Conduit
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-21
®
EQ Load Centers
Outdoor Enclosures
Knockout Diagrams
LOAD CENTERS &
CIRCUIT BREAKERS
1
Outdoor Enclosure Knockout Diagrams
W0204ML1060
W0204ML1125
W0303ML3100
WB3100
WB2225 and WB32225
W0408ML1125
W0612ML1125
W0816ML1125
100A – 225A
Main Breaker and Main Lug
Devices
W0406ML1125CU
1-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
®
EQ Load Centers
Indoor Enclosures
Knockout Diagrams
Indoor Enclosure Knockout Diagrams
1
LOAD CENTERS &
CIRCUIT BREAKERS
E0204ML1060
E0612ML1125
E0816ML1125
E1224ML1100F
E0408ML1125
300-400A Main
Breaker and
Main Lug Devices
E0303ML3100SCU
EB3100
EB3225
All Riser
Panels
RAG24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-23
Circuit Breakers
Type QP with INSTA-WIRE
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
1-Pole Plug-In (120V AC)
Continuous
Current Rating
@ 40° C
10
15
20
25
30
35
40
45
50
60
70
Type QP
Type QPH
10,000A IR
22,000A IR
Catalog
Number
Q110 NEW
Q115
Q120
Q125
Q130
Q135■
Q140
Q145■
Q150
Q160
Q170
List
Price $
33.00
33.00
33.00
33.00
33.00
33.00
33.00
33.00
33.00
33.00
69.00
Catalog
Number
—
Q115H
Q120H
Q125H■
Q130H
Q135H■
Q140H
Q145H■
Q150H
Q160H■
Q170H■
Type HQP
65,000A IR
List
Price $
—
66.00
66.00
66.00
72.00
72.00
72.00
72.00
72.00
72.00
93.00
Catalog
Number
—
Q115HH■
Q120HH■
Q125HH■
Q130HH■
Q135HH■
Q140HH■
Q145HH■
Q150HH■
Q160HH■
Q170HH■
List
Price $
—
123.00
123.00
123.00
143.00
143.00
143.00
143.00
143.00
143.00
179.00
2-Pole Plug-In (Common-Trip 120/240V AC )
10
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
Q210
Q215
Q220
Q225
Q230
Q235
Q240
Q245
Q250
Q260
Q270
Q280
Q290
Q2100
Q2110
Q2125
71.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
145.00
210.00
210.00
210.00
433.00
433.00
—
Q215H
Q220H
Q225H■
Q230H
Q235H■
Q240H
Q245H■
Q250H
Q260H
Q270H
Q280H■
Q290H
Q2100H
Q2110H
Q2125H
—
147.00
147.00
147.00
147.00
147.00
147.00
147.00
147.00
147.00
236.00
330.00
330.00
330.00
1128.00
1128.00
—
Q215HH
Q220HH
Q225HH■
Q230HH
Q235HH■
Q240HH■
Q245HH■
Q250HH
Q260HH
Q270HH
Q280HH■
Q290HH■
Q2100HH
Q2110HH■
Q2125HH
—
313.00
313.00
313.00
313.00
313.00
334.00
334.00
334.00
334.00
558.00
689.00
689.00
689.00
2277.00
2277.00
2-Pole Plug-In (Common-Trip 240V AC)
15
20
30
40
50
60
70
100
Q215R
Q220R
Q230R
Q240R
Q250R
Q260R
Q270R
Q2100R■
213.00
213.00
213.00
213.00
213.00
213.00
236.00
330.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3-Pole Plug-In (Common-Trip 240V AC)
10
15
20
25
30
35
40
45
50
60
70
80
90
100
Q310
Q315
Q320
Q325
Q330
Q335
Q340
Q345
Q350
Q360
Q370
Q380
Q390
Q3100
253.00
253.00
253.00
253.00
253.00
253.00
253.00
253.00
253.00
253.00
317.00
380.00
380.00
380.00
—
Q315H
Q320H
Q325H■
Q330H
Q335H■
Q340H
Q345H■
Q350H
Q360H
Q370H
Q380H
Q390H
Q3100H
—
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
500.00
500.00
560.00
560.00
560.00
—
Q315HH■
Q320HH
Q325HH■
Q330HH
Q335HH■
Q340HH
Q345HH■
Q350HH
Q360HH
Q370HH■
Q380HH■
Q390HH■
Q3100HH
QP / QPH / HQP Internal Accessories
Control Voltage AC
120V Shunt Trip
24V Shunt Trip
120V Auxiliary Switch
3-Pole Padlocking Device
Handle Block
Catalog Number
add suffix …00S01■
add suffix …00S07■
add suffix …01■
ECQLD3
ECHBD1
■ Built to order. Allow 2-3 weeks for delivery.
UL
Listed for use with 60/75˚ wire through 125 amps,
HACR rated.
1A and 1B contacts.
UL Listed for frequent switching applications (SWD).
1-24
Field/Factory Installed
Factory
Factory
Factory
Field
Field
—
527.00
527.00
527.00
527.00
527.00
615.00
615.00
615.00
660.00
660.00
740.00
740.00
740.00
Modifications
List Price $
134.00 (adder)
134.00 (adder)
74.00 (adder)
98.00
9.10
Description
400 Hz Calibration
415V 50Hz Calibration
Marine 50˚C Ambient
Calibration
Fungus Proofing
120V AC Fluorescent Lighting.
Listed for use on 3-phase grounded “B” systems —
10,000 for this application.
Shipped 12 per sleeve.
Shipped 6 per sleeve.
Shipped 4 per sleeve.
UL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Number
add suffix …Y
add suffix …E
List Price $
7.50 (adder)
No adder
add suffix …M
No adder
add suffix …F
10.00 (adder per pole)
UL
Listed 5 KA IR.
UL Listed.
& 2-Poles only.
NEW Type QP1, UL listed for 16 AWG conductors and
multiple wires.
Not
1
Discount Schedule RESI
Circuit Breakers
Duplex, Triplex and Quadplex Plug-In Breakers
Selection
Duplex Circuit Breakers
Catalog
Number
List
Price $
Catalog
Number
QT
15 –15
15 – 20
20 – 20
20 – 30
15– 30 ■
20– 30
30 – 30
Q1515
Q1520
Q2020
Q2030
Q3015
Q3020
Q3030
69.00
69.00
69.00
69.00
69.00
69.00
69.00
Q1515NC햲
Q1520NC햲
Q2020NC햲
—
—
—
Q3030NC햲
1-Pole
10K AIC
120V AC
List
Price $
114.00
114.00
114.00
—
—
—
114.00
QT Duplex
SHIPPING: 12 per carton, (Wt. 4.8 lbs.)
These space saver duplex breakers combine two
independent 1/2" breaker poles in a common unit.
This unit plugs into one load center stab and
requires one panel space. HACR rated.
Triplex Circuit Breakers
Breaker
Type
QT
2-Pole
10K AIC
120/240V AC
Center
Common Trip
Ampere Rating
Single
Pole
Common-Trip
2-Pole
Catalog
Number
15
15
Q21515CT
15
20
Q21520CT
15
25
Q21525CT■
15
30
Q21530CT
15
35
Q21535CT■
15
40
Q21540CT
15
45
Q21545CT■
15
50
Q21550CT
20
20
Q22020CT
20
25
Q22025CT■
20
30
Q22030CT
20
35
Q22035CT■
20
40
Q22040CT
20
45
Q22045CT■
20
50
Q22050CT
30
30
Q23030CT
SHIPPING: 6 per carton, (Wt. 4.9 lbs.)
LOAD CENTERS &
CIRCUIT BREAKERS
Ampere
Rating
1
Breaker
Type
List
Price $
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
134.00
128.00
QT Triplex
These space saver triplex breakers provide
a 2-pole common trip breaker for 120/240V AC
circuits and two single poles for 120V AC circuits.
Triplex require two panel spaces. HACR rated.
Quadplex Circuit Breakers
Breaker
Type
QT
2-Pole
10K AIC
120/240V AC
Common Trip
Ampere Rating
Inside
Outside
2-Pole
2-Pole
15
20
20
20
30
30
40
50
SHIPPING: 6 per
Catalog
Number
15
Q21515CT2
20
Q22020CT2
30
Q23020CT2
40
Q24020CT2
30
Q23030CT2
40
Q24030CT2
40
Q24040CT2
30
Q23050CT2
carton, (Wt. 4.8 lbs.)
List
Price $
139.00
139.00
139.00
139.00
139.00
139.00
139.00
139.00
QT Accessories
Description
Catalog Number
Handle Block
ECBX231M
For inches / millimeters conversion, see Application Data
section.
Discount Schedule RESI
QT Quadplex
Common Trip
These space saver quadplex breakers provide
two sets of common trip, two-pole breakers for
120/240V AC circuits, and require two panel
spaces. HACR rated.
List Price $
9.70
■ Built to order. Allow 2–3 weeks for delivery.
햲
Non-CTL. For replacement use only in panels manufactured before 1968
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-25
Circuit Breakers
LOAD CENTERS &
CIRCUIT BREAKERS
1
Arc-Fault and Ground-Fault Breakers
Selection/Wiring Diagrams
▪ UL Listed and CSA Certified
▪ HACR Rated
▪ Standard 1 inch per pole format with plug-in design
Ground-Fault Circuit Interrupters (Class A - 5mA)햳
Ground-fault circuit interrupters (GFCI) provide Class A ground fault protection. A GFCI
is a device intended for personnel protection and will de-energize the circuit when a
fault current to ground is 6 milliamperes or more.
10,000 A IR
Breaker
Type
QPF/QPHF
1-Pole
120V AC
Plug-In
QPF/QPHF
2-Pole
120/240V AC
Plug-In
22,000 A IR
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
15
20
25
30
QF115 햲
QF120 햲
QF125 ■
QF130
255.00
255.00
255.00
255.00
QF115H햲
QF120H햲■
—
QF130H
515.00
515.00
—
515.00
15
20
30
40
50
60
QF215
QF220
QF230
QF240
QF250
QF260
454.00
454.00
454.00
454.00
454.00
454.00
QF215H
QF220H
QF230H
QF240H
QF250H
QF260H
678.00
678.00
678.00
678.00
678.00
678.00
1-Pole GFCI
2-Pole GFCI
1-Pole Equipment
Protection
2-Pole Equipment
Protection
1-Pole AFCI
2-Pole AFCI
Ground Fault Equipment Protection (30mA)햳
Type EQF circuit breakers provide protection of equipment from damaging
line-to-ground fault currents by de-energizing the circuit for all ungrounded
conductors of the faulted circuit.
QE/QEH
1-Pole
120V AC
Plug-In
QE/QEH
2-Pole
120/240V AC
Plug-In
15
20
30
QE115 햲
QE120 햲
QE130
465.00
465.00
465.00
QE115H햲
QE120H햲
QE130H
777.00
777.00
777.00
15
20
30
40
50
60
QE215
QE220
QE230
QE240
QE250
QE260 ■
616.00
616.00
616.00
616.00
616.00
616.00
QE215H
QE220H
QE230H
QE240H
QE250H
QE260H■
1016.00
1016.00
1016.00
1016.00
1016.00
1016.00
Arc-Fault Circuit Interrupters (AFCI)햳
Arc-fault circuit interrupters (AFCI) detect arcing faults (an unintentional arcing condition
in a circuit) that standard circuit breakers are unable to detect. An AFCI is a branch
feeder device intended to mitigate the effects of arc-faults by de-energizing the circuit
when an arc-fault is detected.
QAF/QAFH
15
Q115AF햲
255.00
Q115AFH■햲
515.00
1-Pole 120V AC
20
Q120AF햲
255.00
Q120AFH■햲
515.00
QAF/QAFH
15
Q215AF
454.00
Q215AFH■
660.00
20
Q220AF
454.00
Q220AFH■
660.00
2-Pole 120/240V AC
Wiring Diagrams
QAF/QPF/QE Accessories
Description
Catalog Number
Handle Block
ECBX231M
■ Built to order. Allow 2–3 weeks for delivery.
햲
UL Listed as SWD (Switching Duty) Rated, suitable for
120V AC Fluorescent Lighting.
1-26
List Price $
9.70
햳
White line neutral (pigtail) must be connected to the
panel neutral for the device to function.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Circuit Breakers
Special Application Breakers
Selection
HID Lighting
1
For high-intensity discharge lamp loads having in-rush currents
above the instantaneous trip setting of a standard breaker.
LOAD CENTERS &
CIRCUIT BREAKERS
Complete Breaker
UL Unenclosed
Breaker
Type
QP
1-Pole
120V AC
Wiring
Diagram
Ampere
Rating
Catalog
Number
List
Price $
Figure 1
15
20
30
Q115HID 햲 ■
Q120HID 햲
Q130HID
44.50
44.50
44.50
Figure 2
15
20
30
Q215HID
Q220HID ■
Q230HID ■
91.00
91.00
91.00
QP
2-Pole
120/240V AC
Switching Neutral
Molded Case Switch
For applications that do not require overcurrent protection.
QP
2-Pole
Plug-In
240V AC
Figure 2
30
60
Q230S
Q260S
49.00
49.00
No-Noise
For applications that require a reduction in the 60-cycle hum of a
standard breaker.
QP
2-Pole
120/240V AC
Figure 2
50
60
70
90
Q250NN■
Q260NN
Q270NN
Q290NN■
72.00
72.00
148.00
203.00
Water Heater
Switching Neutrals
Figure 1
Figure 2
Figure 3
Figure 4
Used where all conductors are required to be disconnected.
Neutral pole of the circuit breaker does not connect to loadcenter
bus. One side is wired to neutral and the other side to the device.
QG
2-Wire
Common Trip
120V AC
Figure 3
15
20
30
QG215
QG220
QG230■
119.00
119.00
119.00
Figure 4
15
20
30
QG315■
QG320
QG330■
172.00
172.00
172.00
QG
3-Wire
Common Trip
120/240V AC
Tungsten Lighting
For high wattage, tungsten-lamp loads having in-rush currents
above the instantaneous trip setting of a standard breaker.
QP
1-Pole
120V AC
Figure 1
15
20
Q115T 햲 ■
Q120T 햲
Figure 5
32.00
33.00
Water Heater
Wiring Diagrams
When installed in a loadcenter, the water heater circuit breaker
does not make electrical connection with the loadcenter bussing.
Separate metered circuit is connected to line terminals of the
breaker. Used in special rate water heating areas.
QW
2-Pole
120/40V AC
Plug-In
Figure 5
15
20
30
■ Built to order. Allow 2–3 weeks for delivery.
QW215
QW220
QW230
91.00
91.00
91.00
햲
UL Listed as SWD (Switching Duty) Rated, suitable for 120V AC Fluorescent Lighting.
Note: All circuit breakers on this page are 10K AIC
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-27
Circuit Breakers
3/4 Inch Plug-In Breakers
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
Features
▪ 3/4" format
▪ HACR Rated
▪ UL Classified for use in certain Square D
load centers
Type QD Circuit Breakers
The Type QD circuit breaker line is
available in 1-pole and 2-pole common
trip versions listed on this page.
The circuit breakers are UL Classified
and UL Listed.
All QD breakers are supplied with load
side connectors suitable for 60/75°C
wire and are calibrated for 40°C
maximum ambient applications.
UL Classified
Siemens Type QD circuit breakers are
UL Classified for use in specific Square
D load centers in place of Square D Type
QO® circuit breakers. A Panelboard
Compatibility List packaged with each
QD breaker shows which type QD
circuit breakers are acceptable for
use in Square D load centers.
The interrupting rating on these circuit
breakers is 10,000A IR maximum and
they are not series rated with Square D
circuit breakers or equipment. This UL
Classification allows a Siemens Type QD
circuit breaker to be used in place of a
Square D Type QO circuit breaker in
those load centers that are specifically
shown on the Panelboard Compatibility
list. For additional information, contact
your local Siemens sales engineer.
For inches / millimeters conversion, see Application Data
section.
1-28
1-Pole
2-Pole
120V
120/240V Common Trip
Continuous
Current Rating
@ 40°C
Catalog
Number
List
Price $
Catalog
Number
List
Price $
15
20
30
40
50
60
D115 햲
D120 햲
D130
D140
D150
D160
33.00
33.00
33.00
33.00
33.00
33.00
D215
D220
D230
D240
D250
D260
72.00
72.00
72.00
72.00
72.00
72.00
Shipping Weights
Number of
Poles
Number Per
Carton
Shipping
Weight (lbs.)
1
2
16
8
3.8
4.2
Panelboard Compatibility List
Listed Panelboards — Square D — Catalog Numbers
QO2L30F/S
QO2-4L70F/S
QO2-4L70TS
QO2-4L70RB
QO6-12L100F/S
QO6-12L100DF/S
QO6-12L100TF/S
QO6-12L100DTF/S
QO6-12L100RB
QO8-16L100F/S
QO8-16L100DF/S
QO8-16L100TF/S
QO-16L100DTF/S
QO8-16L100RB
QO112M100/RB
QO116M100/RB
QO120M100/RB
QO124M100
QO12L100DF/S
QO12L100RB
QO12-20M100/RB
QO12-20M100TF/S
햲
QO12M100/RB
QO16-20M100/RB
QO16M100/RB
QO20M100/RB
QO112L125G/RB
QO112-24L125/RB
QO112-24L125GWGC
QO116L125G
QO116-24L125G/RB
QO12-24L125/RB
QO120-24L125G
QO120-24L125GWGC
QO120L125G
QO124L125G/RB
QO124M125/RB
QO16L125/RB
QO16-12M125FTRB
QO16-24L125/RB
QO20L125/RB
QO20-24L125/RB
QO24L125/RB
QO120-30L150G
QO120-30M150/RB
QO124L150G
QO124M150
QO130L150G/RB
QO130M150/RB
QO16L150/RB
QO16M150/RB
QO16-30L150/RB
QO18-16M150FTRB
QO20-30M150/RB
QO20-30M150TF/S
QO20-30L150
QO24L150/RB
QO24M150/RB
QO30L150/RB
QO30M150/RB
QO8-16M200FT/RB
QO112L200G/RB
QO120-40M200/RB
QO120-40M200TC
QO124M200
QO130L200G/RB
QO130-40M200
QO130200/RB
QO130-40L200G/RB
QO140M200/RB
QO16L200/RB
QO16M200/RB
QO18-16M200FTRB
QO20-40L200/RB
QO20-40M200TF/S
QO20-40M200/RB
QO24L200/RB
QO24M200/RB
QO30L200/RB
QO30M200/RB
QO30-40L200/RB
QO30-40M200/RB
QO40M200/RB
QO140M225
QO142L225G/RB
UL Listed for frequent switching applications (SWD).
120V AC Fluorescent Lighting. One or two load
conductors.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Circuit Breakers
Main and Branch Circuit Breakers
Catalog
Number
QN
150
175
200
QN2150
QN2175■
QN2200
477.00
477.00
477.00
QN2150R
QN2175R ■
QN2200R
477.00
477.00
477.00
10
10
10
150
175
200
QN2150H
QN2175H ■
QN2200H
586.00
586.00
586.00
QN2150RH
QN2175RH ■
QN2200RH
586.00
586.00
586.00
22
22
22
150
175
200
HQN2150
HQN2175 ■
HQN2200
2514.00
2514.00
2514.00
HQN2150R
HQN2175R ■
HQN2200R
2514.00
2514.00
2514.00
65
65
65
QNH
2-Pole
120/240V AC
HQN
2-Pole
120/240V AC
Catalog
Number
List
Price $
UL Interrupting
Ratings (kA)
QNR
QN
Requires 4 panel spaces, 2 adjacent and 2 opposite. SHIPPING: 1 per carton (Wt. 3 lbs.)
Main Breaker Kits
For use in Ultimate Load Centers
UL
Ampere Catalog
List
Type
Rating
Number
Price $
For use in EQIII Load Centers
UL
Ampere
Catalog
Type
Rating
Number
EQ8681
EQ8682
EQ8693
EQ8695
EQ8696
EQ9675
EQ9676
EQ9683
EQ9685
EQ9686
100
125
150
200
225
MBK100A
MBK125A
MBK150A
MBK200A
MBK225A
230.00
473.00
588.00
588.00
588.00
100
125
150
200
225
MBK100
MBK125
MBK150
MBK200
MBK225
List
Price $
UL Interrupting
Ratings (kA)
260.00
513.00
639.00
639.00
639.00
22
22
22
22
22
EQ96XX
Breaker
Type
QPJ
3-Pole
240V AC
Ampere
Rating
Catalog
Number
UL Interrupting
Ratings (kA)
List
Price $
125
150
200
QPJ3125
QPJ3150
QPJ3200
10
10
10
1226.00
1226.00
1226.00
Requires 6 spaces due to cross over design. Fits only EQIII 125-400A 3-phase load centers
SHIPPING: 5 per carton (Wt. 17 lbs.)
Breaker
Type
QPP
2-Pole
120/240V AC
QPPH
2-Pole
120/240V AC
HQPP
2-Pole
120/240V AC
HQPPH
2-Pole
120/240V AC
Ampere
Rating
Catalog
Number
125
150
175
200
225
Q2125B
Q2150B
Q2175B■
Q2200B
Q2225B
125
150
175
200
225
UL Interrupting
Ratings (kA)
Volts AC 120/240
List
Price $
441.00
441.00
441.00
441.00
441.00
10
10
10
10
10
Q2125BH
Q2150BH
Q2175BH■
Q2200BH
Q2225BH■
1129.00
1129.00
1129.00
1129.00
1129.00
22
22
22
22
22
125
150
175
200
225
Q2125BHH■
Q2150BHH
Q2175BHH■
Q2200BHH
Q2225BHH■
2238.00
2238.00
2238.00
2238.00
2238.00
65
65
65
65
65
100
125
150
175
200
225
HQ2100BH■
HQ2125BH■
HQ2150BH■
HQ2175BH■
HQ2200BH■
HQ2225BH■
2733.00
2733.00
2733.00
2733.00
2733.00
2733.00
100
100
100
100
100
100
MBK
(100,125)A
MBK
(150,200,225)A
2-Pole QPP
Circuit breaker is 4-poles wide. For use on 200A modular and Uni-Pak® metering,
and on 300-600A load centers.
SHIPPING: 8 per master carton (Wt. 17.5 lbs., 2 per carton)
QPJ
QN/QNH/HQN and Ultimate Main Breaker Kit
Accessories (Factory installed only)
Shunt Trip
Control Voltage AC
Add Suffix
List Adder $
120V
00S01 ■
275.00
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
Discount Schedule RESI
All circuit breakers on this page are common trip.
Reverse handle.
Not UL Listed.
MBK100A for use in 100 and 125A load centers.
QNR required for horizontal applications or vertical
applications where the lugs are facing up. The QN
breaker is required for vertical applications where the
lugs are facing down as shown.
MBK125A for use in 125A load centers.
MBK150A for use in 150, 200 and 225A load centers.
MBK200A for use in 200 and 225A load centers.
MBK225A for use in 225A load centers.
MBK175A for use in 200 and 225A load centers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-29
LOAD CENTERS &
CIRCUIT BREAKERS
Ampere
Rating
1
Breaker
Type
2-Pole
120/240V AC
List
Price $
Selection
Circuit Breakers
Line Diagrams
LOAD CENTERS &
CIRCUIT BREAKERS
1
Dimension Drawings
1-Pole
2-Pole
3-Pole
3"
23/8"
31/8"
Type QT
Type QPF, QPHF, QE, QAF, QAFH
Type EQ8681, EQ8682
Type EQ8693, EQ8695, EQ8696
Type QPJ
Type QN, QNH, HQN
Type QNR, QNRH, HQNR
Type QPP, QPPH, HQPP, HQPPH
QP, QPH, HQP
햲
All standard circuit breakers are calibrated to 40°C maximum ambient application.
1-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Circuit Breakers
Lug Data
Cables
Per
Connector
Connector
Wire
Range
2
1
1
1
1
#16 AWG Cu
#14–#8 AWG Cu
#12–#8 AWG Al
#14–#6 AWG Cu
#14–#6 AWG Al
40–50
1
1
#8–#6 AWG Cu
#8–#4 AWG Al
55–70
1
1
#8–#4 AWG Cu
#8–#2 AWG Al
80–100
1
1
#4–#1/0 AWG Cu
#2–#1/0 AWG Al
110–125 햳
1
1
#2–#1/0 AWG Cu
#1/0–#2/0 AWG Al
LOAD CENTERS &
CIRCUIT BREAKERS
Circuit
Breaker
Ampere
Rating
1
Circuit
Breaker
Type
Reference
LOAD SIDE
QP, QPH, HQP, Plug-in
10
15–20
25–35
QT
1
#14–#8 AWG Cu
1
#12–#8 AWG Al
15–20
1
1
1
1
1
1
1
1
1
2
15–20
1
25–35
1
1
1
1
#8 AWG CU-Al
#8–#6 AWG Cu
#8–#4 AWG Al
#14–#10 AWG Cu
#12–#8 AWG Al
#8–#6 AWG Cu
#8–#4 AWG Al
#14–#12 AWG Cu
#12–#10 AWG Al
#14–#8 AWG Cu Only
#14–#12 AWG Cu
#12–#10 AWG Al
#10–#8 AWG Cu
#10–#6 AWG Al
#8–#6 AWG Cu
#8–#4 AWG Al
150–200
1
#1–300kcmil Cu-Al
100
1
#4–3/0 AWG Cu-Al
125
1
#4–3/0 AWG Cu-Al
150
1
#1–300kcmil Cu-Al
200
1
#1–300kcmil Cu-Al
225
1
#1–300kcmil Cu-Al
125
1
1
1
1
1
1
1
1
1
1
#1 AWG Cu
#2/0 AWG Al
#1/0 AWG Cu
#3/0 AWG Al
#2/0 AWG Cu
#4/0 AWG Al
#3/0 AWG Cu
250kcmil AWG Al
#4/0 AWG Cu
300kcmil AWG Al
15–35
40
40–50
QPF, QPHF
15–30
40–60
QAF, QAFH
QD
15–20
40–60
QN, QNH, HQN
EQ8681-Ultimate
EQ8682-Ultimate
EQ8693-Ultimate
EQ8695-Ultimate
EQ8696-Ultimate
QPP, QPPH, HQPP, HQPPH
150
175
200
225
EQ9675-EQIII
100
1
1
#3 AWG Cu
#1 AWG Al
EQ9677-EQIII
125
1
1
#1 AWG Cu
#2/0 AWG Al
EQ9683-EQIII
150
1
1
#1/0 AWG Cu
#3/0 AWG Al
EQ9685-EQIII
200
1
1
#3/0 AWG Cu
250kcmil AWG Al
EQ9686-EQIII
225
1
1
#4/0 AWG Cu
300kcmil AWG Al
QPJ
125–200
1
#2–300kcmil Cu-Al
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-31
Surge Protection
LOAD CENTERS &
CIRCUIT BREAKERS
1
Point-of-Entry
Selection
Circuit Breaker and Secondary Surge Arrester
Circuit Breaker and TVSS
Features
▪ UL Listed
▪ Easy to install
▪ Perfect for retrofit - replaces two 1-inch breakers without losing any circuits
▪ A single device protects the entire electrical system from damage caused by surges
By installing a Siemens Circuit Breaker/Surge Arrester or Circuit Breaker/TVSS device in
the load center of the residence, surge protection is provided for all branch circuits.햴
Two red LED indicator lights are provided to show that surge protection is provided for all
circuits connected to the panelboard. As a Siemens exclusive feature, the device notifies
the owner of loss of surge protection by tripping one or both of the circuit breakers.
These breakers should be used for circuit protection of frequently used household or
facility circuits because the lights and devices connected to these circuits provide an
effective indication that surge protection is being provided.
Breaker
Type
Ampere
Rating
Catalog
Number
List
Price $
Surge
Type
QP햲햳
(2) 15
QSA1515
261.00
Surge Arrester
(2) 20
QSA2020
261.00
Surge Arrester
1-Pole
120/240V AC
Surge Arrester
10K AIC
The Siemens circuit breaker and transient voltage surge suppressor is comprised of a highly effective TVSS module
integrated with (2) 1-pole circuit breakers. This device incorporates the robust features of our secondary circuit breaker
surge arrester with a lower clamping voltage rating.
By installing a Siemens Circuit Breaker/TVSS device in the load center of the residence, surge protection is not only
provided for all branch circuits, but also, fixtures, appliances, motors, and other electronic equipment in the house
served by that load center.햴
QP햲햳
1-Pole
120/240V AC
10K AIC
(2) 20
QSA2020TVSS
Number of Poles
Initial Clamping Level
Transient Energy Rating
Secondary Surge Arrester Voltage Rating
Transient Suppression Voltage Rating
Peak Current Rating (impulse)
Discharge Voltage Characteristic
(line-to-neutral)
Discharge Current Withstand Rating
(line-to-neutral)
Circuit Breaker Interrupting Rating
Warranty Amount
Connected Appliances Warranty햴
Warranty Period
Lightning Protection
햲
햳
UL Listed as SWD (Switching Duty) Rated, suitable for
120V AC Fluorescent Lighting.
HACR Rated
1-32
377.00
TVSS
Circuit Breaker and
Secondary Surge Arrester
(2) 1-Pole Circuit Breakers
360 Volts
460 Joules line-to-neutral
920 Joules line-to-line
175V AC max. line-to-ground
–
–
40,000 amperes
@ 1,500A, 600 volts
@ 5,000A, 800 volts
Circuit Breaker and Transient
Voltage Surge Suppressor
(2) 1-Pole Circuit Breakers
240 Volts
360 Joules line-to-neutral
720 Joules line-to-line
–
500 volts peak, line-to-neutral
1000 volts peak, line-to-line
40,000 amperes
@ 1,500A, 600 volts
@ 5,000A, 800 volts
10,000 amperes
10,000A, 120/240V AC
$10,000
No
24 months
No
10,000 amperes
10,000A, 120/240V AC
$20,000
Yes
24 months
No
햴
See warranty for detailed coverage information. Does
not include electronic devices.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Surge Protection
Point-of-Entry
Selection
Transient Voltage Surge Suppressor
1
UL listed
Rated for single phase panels up to 400 amps
Audible Alarm
Guaranteed lightning protection
LOAD CENTERS &
CIRCUIT BREAKERS
▪
▪
▪
▪
TPSA9040 shields motor-driven appliances in residential and
light commercial applications against electrical power surge
damage, including lightning, from entering through the main
electrical service panel. Two LED lights indicate protection
status. The audible alarm alerts you when protection is
disrupted.
Surge
Type
TVSS
Catalog
Number
TPSA9040햲
Single Pulse Energy Dissipation
Spike Capacity
Line Voltage
Initial Clamping Level
Rated Voltage
Short Circuit Rating
Warranty Amount
Connected Appliances Warranty
Warranty Period
Lightning Protection
TPSA9040
List
Price $
441.00
1080 Joules
40,000 amperes
102/2401 Phase 50/60Hz
400V
150V
10,000 amperes
$20,000
Yes
3 years
Yes
Secondary Surge Arresters
▪ UL listed
▪ Rated for single and three phase panels
▪ Suitable for indoor and outdoor installation
These Secondary Surge Arresters, also referred to as Lighting
Arresters, are designed to protect electrical equipment from
damaging effects of Spikes (+) and Notches (-) caused by
lightning, utility switching, insulation arcing, electrical motor
cycling, and other large or sudden changes in electrical power
flow on incoming AC power lines.
Phase
1
3
Catalog
Number
TPSASA1
TPSESA3
List
Price $
154.00
531.00
TPSEA3
1-Phase
3-Phase
햲
For flush mounting applications, use flush mount kit
TPSA9040F.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-33
Surge Protection
Point-of-Entry or Point-of-Use
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
Telecommunication Protector
▪
▪
▪
▪
UL listed
Rated for RJ45 Modem/Fax/DSL protection
Easy to install
Guaranteed lightning protection
TPSTEL protects telephone or modems connected
electronics in residential and light commercial applications
against electrical transient damage, including lightning, from
entering through the main telephone connection. To have
complete protection for your equipment, home, or business, it
is important to protect AC power lines and all data lines the
equipment is connected through.
Surge
Type
Telco
Catalog
Number
TPSTEL
AC Surge Protection
EMI/RFI
Catastrophic Surge Circuit
Spike Capacity
Let Through Voltage
Overcurrent Protection
Response Time
Data Line Protected
0.0 db
Yes
200 Amps
<260V
Yes
1 ns
3, 4, 5, 6 - RJ45
Coaxial Protector
▪
▪
▪
▪
TPSTEL
List
Price $
245.00
TPSCOAX
UL listed
Rated for CATV, DSS, TV, VCR and cable modem
Easy to install
Guaranteed lightning protection
TPSCOAX shields coaxial connected electronics in residential
and light commercial applications against electrical transient
damage, including lightning, from entering through the main
cable connection. To have complete protection for your
equipment, home, or business, it is important to protect AC
power lines and all data lines the equipment is connected
through.
Surge
Type
Coaxial
Catalog
Number
TPSCOAX
AC Surge Protection
Frequency Range
Catastrophic Surge Circuit
Spike Capacity
Let Through Voltage
Overcurrent Protection
Response Time
Insertion Loss
1-34
List
Price $
245.00
1 mHz thru 1.45 gHz
Yes
200 Amps
<85V
Yes
1 ns
0db to 3.0 db
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Electricenter
Accessories햸
Selection
Circuit Breaker Accessories
Load Center Conversion Kits
List
Pack
Price $ Qty.햷
ECQTH2
Handle Tie - Duplex
4.40
25
ECQTH3
Handle Tie - 2-Pole
97.00
50
ECQL1
Handle Blocking Device - 1" Handles
9.10
25
ECBX231M
Handle Blocking Device - 1/2" Handles
9.70
25
ECMBR2
Main Breaker Retainer - for Ultimate
Load Centers
14.50
Catalog
Number
List
Pack
Price $ Qty.햷
Description
MBK100A
Main Breaker Conversion Kit - for use in
100–125A Ultimate Load Centers
230.00
1
MBK125A
Main Breaker Conversion Kit - for use in
125A Ultimate Load Centers
473.00
1
MBK150A
1
Main Breaker Conversion Kit - for use in
150–225A Ultimate Load Centers
588.00
1
6.60
1
MBK200A
Main Breaker Conversion Kit - for use in
200–225A Ultimate Load Centers
588.00
1
MBK225A
Main Breaker Conversion Kit - for use in
225A Ultimate Load Centers
588.00
1
ECMLK125
Main Lug Conversion Kit - 100–125A
Ultimate Load Centers
24.50
1
ECMLK225
Main Lug Conversion Kit - 150–225A
Ultimate Load Centers
26.50
1
MCB12
300MCM Lugs and Straps for Old
EQ Style Load Center
50.00
1
ECMBR1햲
Main Breaker Retainer - for EQ Load Centers
ECQML12햸
Mechanical Interlock
299.00
10
ECPLD1
Padlocking Device - 1-Pole Type QP, QAF, QPF,
QT Duplex
10.10
1
ECPLD2
Padlocking Device - 2-Pole Type QP, QAF, QPF,
QT Triplex/Quadplex
10.20
1
ECPLD125햳
Padlocking Device - 100-125A Main Breaker
8.60
1
ECPLD2R
NEW
Red Padlock for 2-pole 1" breakers and
quad breakers
15.30
1
ECQLN3
NEW
Padlock for QN, QNR, and 150-225A MBKA
55.00
1
Lug Kits
Ground Bar Kits
Catalog
Number
Description
ECGB5
Ground Bar Kit - 5 Position, #4-14 AWG Cu/Al
18.40
ECGB10
Ground Bar Kit - 10 Position, #4-14 AWG Cu/Al
21.00
Catalog
Number
ECLKB1햶
Description
Ground Lug Kit - for Ultimate Load Centers
1
ECLK3
Neutral Lug Kit - #1-300 AWG Cu/Al
24.00
1
1
ECLK1-2
Neutral Lug Kit - #2-1/0 AWG Cu/Al
13.90
1
ECLK2
Neutral Lug Kit - #4-2/0 AWG Cu/Al
18.40
1
ECLK2SC
Neutral Lug Kit for Swiss Cheese style
neutral/ground bar - #4-2/0 AWG Cu/Al
21.00
1
ECLK2150
Sub-Feed Lug Kit - #14-2/0 AWG Cu,
#1/0 AWG Al
100.00
1
ECLK2125
Sub-Feed Lug Kit - #3-1 AWG Cu, #1/0 AWG Al
ECLK2225
Sub-Feed Lug Kit - #2-300
ECLK3125
3-Pole Sub-Feed Lug Kit - #3-1 AWG Cu,
#1/0 AWG Al
ECLK3225
3-Pole Sub-Feed Lug Kit - #2-300 AWG
List
Pack
Price $ Qty.햷
ECGB101
Ground Bar Kit - 10 Position, #4-14 AWG Cu/Al,
1 Position #14-1/0 Cu/Al
27.00
1
ECGB14
Ground Bar Kit - 14 Position, #4-14 AWG Cu/Al
24.00
1
ECGB141
Ground Bar Kit - 14 Position, #4-14 AWG Cu/Al,
1 Position #14-1/0 Cu/Al
29.50
1
ECGB142
Ground Bar Kit - 14 Position, #4-14 AWG Cu/Al,
1 Position #6-2/0 Cu/Al
33.00
1
ECGB20
Ground Bar Kit - 20 Position, #4-14 AWG Cu/Al
27.00
1
ECGB201
Ground Bar Kit - 20 Position, #4-14 AWG Cu/Al,
1 Position #14-1/0 Cu/Al
33.00
1
ECGB202
Ground Bar Kit - 20 Position, #4-14 AWG Cu/Al,
1 Position #6-2/0 Cu/Al
33.00
1
ECINSGB5
Insulated Isolated Ground Bar - 5 Position
33.00
1
ECINSGB14
Insulated Isolated Ground Bar - 14 Position
42.50
1
ECINSGB20
Insulated Isolated Ground Bar - 20 Position
48.50
1
ECCS1
Collar Strap - #14-1/0 AWG Cu/Al
8.00
1
ECCS2
Collar Strap - #6 AWG - 250 kmil Cu/Al
23.00
1
Hubs
Catalog
Number
List
Pack
Price $ Qty.햷
Description
ECHS000
Closure Plate
38.00
1
ECHS075
Hub - 3/4"
39.50
1
ECHS100
Hub - 1"
39.50
1
ECHS125
Hub - 1 1/4"
39.50
1
ECHS150
Hub - 1 1/2"
39.50
1
ECHS200
Hub - 2"
69.00
1
ECHS250
햲
햳
햴
햵
Hub - 2 1/2"
Not suitable for use on 15–50A, 10k AIC type QP circuit
breakers.
For use with Ultimate Load Center main breakers.
2 filler plates required for 150–225A main
breaker opening.
Provides 1/4" clearance between wall and load center.
Discount Schedule RESI
109.00
햶
햷
1
List
Pack
Price $ Qty.햷
26.50
1
30.50
1
148.00
1
42.00
1
202.00
1
Miscellaneous Load Center Accessories
Catalog
Number
List
Pack
Price $ Qty.햷
Description
ECQFL2
Add-A-Lock - Flush Mount, 100–225A Ultimate
Load Centers
ECQFL1
Add-A-Lock - Flush Mount, Replacement Only
ECCP1
Circuit Directory Cards - 42 Circuit
ECQF3 햴
Filler Plate - Branch Breakers and 150–225A
Ultimate Main Breaker (bag of 5)
14.20
5
QF3햴
Filler Plate - Branch Breakers and 150–225A
Ultimate Main Breaker (carton of 100)
2.80
1
ECMBF125
Filler Plate - 100–125A Ultimate Main Breaker
ECRLK250
Gutter Tap Kit - 250-1/0 Main, 250-6 Tap
ECSMK1 햵
Spacer Kit
ECTS2
Trim Screws (bag of 6 screws)
ECDL1
Appliance Labels
ECSN1
Extended screws and nuts for use on HC Hubs
RAG24
Riser Auxilliary Gutter. For use on Siemens
Load Centers 24" or larger
For use with Ultimate Load Centers to convert left side
neutral bar into a bounded ground bar, once tie-strap is
removed.
The pack quantity is the number of pieces received when
one catalog number is ordered. Example: When one
ECQF3 is ordered, a bag of 5 plates is shipped.
햸
89.00
1
89.00
1
616.00 100
16.20
1
255.00
3
25.00
4
9.80
6
6.60
10
10.60
4
362.00
1
For a complete list of standby power mechanical interlock
kits, see the Standby Generator Section 17.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-35
LOAD CENTERS &
CIRCUIT BREAKERS
Description
1
Catalog
Number
Electricenter
Accessories
LOAD CENTERS &
CIRCUIT BREAKERS
1
General
QT Dual Tie Handle
ECQTH2
QP 2-Pole Tie Handle
ECQTH3
Handle Blocking
(Lock Off) Device, ECQL1
Padlocking Device
ECPLD1
Padlocking Device
ECPLD2
Lug Kit, 3-Pole, Subfeed or
Feed thru Applications
ECLK3150
Main Breaker Retainer Kit for EQ
Load Centers
ECMBR1
Main Breaker Retainer kit for Ultimate
Load Centers
ECMBR2
Riser Lug Kit
ECRLK250
Ground Bar Kit, ECGB14
Add-A-Lock
(Flush Lock) ECQFL1
1-36
Neutral Lug Kit, ECLK1-2
wire range — #2-1 AWG
Cu or Al
Filler Plate, ECQF3
Neutral Lug Kit, ECLK3
wire range — #1-300 MCM
Neutral Lug Kit, ECLK2
wire range — #4-#2/0 AWG
Cu or Al
Add-A-Lock
(Flush Lock), ECQFL2
Ultimate Load Center
For use on Ground Bar only
Collar Strap, Wire Range;
ECCS1; ECCS2
Mechanical Interlock
ECQML12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Add-A-Lock
(Flush Lock), ECQFL3
300-400A Load Centers
All-Sites™ Temporary Power Outlet Panels
Power Outlet Panel Types Available
General
1
LOAD CENTERS &
CIRCUIT BREAKERS
Surface
Earth Mount Pedestals
Pad Mount Pedestals
▪ Unmetered
▪ Ring Type Metered
(Meter at top or bottom)
▪ Unmetered
▪ Ring Type (Metered)
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪ Ringless Metered
(Meter at top or bottom)
▪ Lighted
Ringless Type (Metered)
Lighted
Cable and Telephone
Water
Unmetered
Ring Type (Metered)
Ringless Type (Metered)
Lighted
Cable and Telephone
Water
Back to Back
Earth Mount Pedestals
Back to Back
Pad Mount Pedestals
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Unmetered
Ring Type (Metered)
Ringless Type (Metered)
Lighted
Cable and Telephone
Water
Unmetered
Ring Type (Metered)
Ringless Type (Metered)
Lighted
Cable and Telephone
Water
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-37
LOAD CENTERS &
CIRCUIT BREAKERS
1
All-Sites™ Temporary Power Outlet Panels
Product Features
Enclosures
Rainproof
Rainproof NEMA Type 3R
construction.
Quality Finish
All sheet metal components are
powder coated with the highest
quality finish and fabricated with
G90 galvanized steel.
Installation Ease
Three raised mounting embosses
make installation a snap.
Removable Deadfronts
Easily removable upper and lower
deadfronts allow easy access to
internal components for ease of
installation.
Theft Resistant
The padlock provisions and elevated
upper deadfront design prevent
unauthorized removal of the plugs or
access to the circuit breakers.
Meters Top or Bottom
Metered units are available with
meters at the top or bottom.
▪ Ring and ringless type meter
covers available.
▪ Utility grade, Landis & Gyr meter
socket base.
▪ Units with meter at bottom are
ideally suited for underground
feeds.
▪ Meter sockets available to 125
amps maximum.
Removable Door
Sloped door allows additional room
for plugs, and is designed with aesthetic forms to add rigidity and sturdiness.
Overhead/Underground Feeds
Surface devices have provisions for
overhead and underground feeds.
▪ For an overhead feed, use a
readily available Type RX
interchangeable hub. Closure
plate is factory included.
▪ For an underground feed, an
extensive variety of easily
removable knockouts are
provided.
Light Option
Lighted option to assist with
nighttime site location and operation.
Light provisions are the longest
lasting and have the lowest
operating cost in the industry.
1-38
Features
Pedestals
Interiors
One-Piece Construction
Rigid, one-piece pedestal
construction for all earth and pad
mounted devices. Thoroughly tested
for torsion and flexing resistance.
GFCI Protection
All 125 volt, 20 amp receptacles have
GFCI protection. Siemens GFCI circuit
breakers are available to provide
protection for 20-50 amp receptacles.
Block Assembly
Loop-feed block assembly provides
connectors capable of accepting up
to 350 kcmil conductors.
(Available on pedestal devices only)
Wire Connectors
All wire connectors are suitable for
use with copper or aluminum wire.
(not shown)
(continued)
Pad Mount
Pad mounted devices are
available. (not shown)
Interiors
Bus Bars
Plated copper bus bars provide the
best protection against corrosion.
Copper Conductors
Ready to use! All internal components
are factory prewired with copper
conductors.
Circuit Protection
All receptacles are protected by
lifetime warranted Siemens circuit
breakers.
Receptacles
Impact-resistant, thermoplastic,
commercial grade receptacles.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
All-Sites™ Temporary Power Outlet Panels
Build Your Own Catalog Numbering System
1햲
2햲
3
5햲
4
Reference
6햲
7
8
9
10
1
P
RECEPTACLE
RECEPTACLE CONFIGURATION햶햷
1
14 - 50R
125/250V 50A
14 - 30R
125/250V 30A
TT30R
125V
1F
2
2F
3
L6 - 30R
250V
30A
6 - 20R
250V
20A
L5 - 20R
125V
20A
5 - 20R2GFI 125V
20A
4F
5
5F
6F
GFCI
5 - 20R2
125V
20A
L5 - 30R
125V
30A
9
9F
햲
햳
햴
햵
햶
햷
TYPE
S= Surface
P= Pedestal
(Earth
Mount)
M= Pedestal
(Pad
Mount)
2B= Pedestal
(Back-toBack, Earth
Mount)
2M= Pedestal
(Back-toBack, Pad
Mount)
L햴
Lighted
EXAMPLE 1: (Catalog No. P1F38FTPXL)
4
8F
METER
U= Unmetered
RT=Metered
Ringless
Type (Meter
at top)
T= Metered
Ring Type
(Meter at
top)
RB=Metered
Ringless
Type (Meter
at bottom)
B= Metered
Ring Type
(Meter at
bottom)
W햳
Water
Required fields.
For use on Pedestal Devices.
All lighted devices require either a 5-20R2GFI
receptacle or a QF120 circuit breaker. For use
on unmetered or top metered devices.
Devices with two outlets with a total amperage
of 60 amps or less have factory ready provisions
for an additional 1-pole circuit breaker. Devices
with three outlets with a total amperage of 100
amps or less have factory ready provisions for
an additional 1-pole circuit breaker.
Up to 3 receptacles, and up to 125 Amps
maximum permissible.
The “F” next to the receptacle number denotes
GFCI circuit breaker protection.
K햵
Extra 1-Pole
Circuit Breaker
Provisions
30A
3F
7
X햳
Cable and
Telephone
RECEPTACLE
LOAD CENTERS &
CIRCUIT BREAKERS
RECEPTACLE
EXAMPLE 2: (Catalog No. P5F8FUS)
Given specifications:
Given specifications:
▪ 50A, 125/250V receptacle with GFCI
circuit breaker
▪ 30A, 125V receptacle with a standard
circuit breaker
▪ 20A, 125V receptacle with GFCI circuit
breaker
▪ Ring type meter at the top
▪ Pedestal mount device
▪ Cable and telephone provisions
▪ Light option
▪ 20A, 125V receptacle with GFCI circuit
breaker
▪ 20A, 250V receptacle with GFCI circuit
breaker
▪ Unmetered
▪ Surface device
Step 1
Start with the power receptacle product
line prefix identifier: (P)
Step 2
Choose the first receptacle and its
circuit breaker type: (1F)
Step 3
Choose the second receptacle and its
circuit breaker type: (3)
Step 4
Choose the third receptacle and its
circuit breaker type: (8F)
Step 5
Choose the utility grade meter type: (T)
Step 6
Choose device mounting type: (P)
Step 7
We have a variety of options you can
add to your panel, including cable and
telephone, and water. Add cable and
telephone option here: (X)
Step 8
Add the light option here: (L)
Step 1
Start with the power receptacle product
line prefix identifier: (P)
Step 2
Choose the first receptacle and its
circuit breaker type: (5F)
Step 3
Choose the second receptacle and its
circuit breaker type: (7)
Step 4
Choose the utility grade meter type: (U)
Step 5
Choose device mounting type: (S)
Remember
If the power outlet panel you need is
not listed, you can build your own
catalog number using these three basic
guidelines:
▪ No more than three receptacles per
device
▪ Total receptacle amperage may not
exceed more than 125 amps
▪ The receptacles must be configured
following a top to bottom sequence
from the catalog numbering system
seen on this page
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-39
All-Sites™ Temporary Power Outlet Panels
Selection
LOAD CENTERS &
CIRCUIT BREAKERS
1
Most Common Items—See Previous Page to Build Your Own Catalog Number
Unmetered Surface Mount Devices
Catalog Number
List Price $
Meter Type
Receptacle #1
Receptacle #2
P17US
382.00
Unmetered
14-50R (50A)
5-20R2GFI (20A)
Receptacle #3
P77US
333.00
Unmetered
5-20R2GFI (20A)
5-20R2GFI (20A)
N/A
P1F7US
470.00
Unmetered
14-50R (50A)
5-20R2GFI (20A)
N/A
P137US
376.00
Unmetered
14-50R (50A)
TT30R (30A)
5-20R2GFI (20A)
P577US
364.00
Unmetered
6-20R (20A)
5-20R2GFI (20A)
5-20R2GFI (20A)
P37US
321.00
Unmetered
TT30R (30A)
5-20R2GFI (20A)
N/A
N/A
Metered Surface Mount Devices
Catalog Number
Receptacle #1
Receptacle #2
P77TS
List Price $
447.00
Ring Type/Top
Meter Type
5-20R2GFI (20A)
5-20R2GFI (20A)
Receptacle #3
N/A
P577TS
553.00
Ring Type/Top
6-20R (20A)
5-20R2GFI (20A)
5-20R2GFI (20A)
P1F7TS
639.00
Ring Type/Top
14-50R (50A)
5-20R2GFI (20A)
N/A
P77RTS
442.00
Ringless/Top
5-20R2GFI (20A)
5-20R2GFI (20A)
N/A
P1F7RTS
637.00
Ringless/Top
14-50R (50A)
5-20R2GFI (20A)
N/A
P5F7TS
637.00
Ring Type/Top
6-20R (20A)
5-20R2GFI (20A)
N/A
P77BS
427.00
Ring Type/Bottom
5-20R2GFI (20A)
5-20R2GFI (20A)
N/A
P177RBS
612.00
Ringless/Bottom
14-50R (50A)
5-20R2GFI (20A)
5-20R2GFI (20A)
P77RBS
578.00
Ringless/Bottom
5-20R2GFI (20A)
5-20R2GFI (20A)
N/A
P5F77RBS
729.00
Ringless/Bottom
6-20R (20A)
5-20R2GFI (20A)
5-20R2GFI (20A)
P1F77RBS
729.00
Ringless/Bottom
14-50R (50A)
5-20R2GFI (20A)
5-20R2GFI (20A)
P17RBS
549.00
Ringless/Bottom
14-50R (50A)
5-20R2GFI (20A)
N/A
Metered and Unmetered Pedestal Devices
Catalog Number
List Price $
Enclosure Type
Meter Type
Receptacle #1
P137UP
722.00
Pedestal Earth Mount
Unmetered
14-50R (50A)
P37UP
568.00
Pedestal Earth Mount
Unmetered
TT30R (30A)
5-20R2GFI (20A)
P137RTP
805.00
Pedestal Earth Mount
Ringless
14-50R (50A)
TT30R (30A)
P137TP
Receptacle #2
TT30R (30A)
Receptacle #3
5-20R2GFI (20A)
N/A
5-20R2GFI (20A)
783.00
Pedestal Earth Mount
Ring Type
14-50R (50A)
TT30R (30A)
5-20R2GFI (20A)
P1F37UML햳
1173.00
Pedestal Earth Mount
Unmetered
14-50R (50A)
TT30R (30A)
5-20R2GFI (20A)
P137RT2B
1101.00
Pedestal Earth Mount
Back to Back
Ringless
14-50R (50A)
TT30R (30A)
5-20R2GFI (20A)
P137U2B
1170.00
Pedestal Earth Mount
Back to Back
Unmetered
14-50R (50A)
TT30R (30A)
5-20R2GFI (20A)
1-40
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Temporary Power Outlet Panels
Dimension Drawings
Top
1
Standard Knockout Pattern
.75” & 1” K.O.
Bottom
LOAD CENTERS &
CIRCUIT BREAKERS
RX
The knockout diagram
shown at left is to
be referenced for all
surface mount devices
9.50
9.50
.25” K.O.
.75”, 1” & 1.5”K.O.
9.50
29.13
23.40
16.10
6.13
6.13
SURFACE
6.13
METERED SURFACE
LIGHTED SURFACE
'A'
6.13
6.13
A
N B
A N
B
84.63
77.38
19.25
19.25
GRADE
GRADE
24.00
24.00
METERED LIGHTED PEDESTAL
METERED PEDESTAL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-41
Temporary Power Outlet Panels
Dimension Drawings
LOAD CENTERS &
CIRCUIT BREAKERS
1
9.50
9.50
6.13
A
N
47.50
B
19.25
53.38
6.13
A
N
UNMETERED LIGHTED PAD
MOUNT PEDESTAL
B
9.50
19.25
6.13
A
N
B
40.25
METERED PAD MOUNT
PEDESTAL
19.25
UNMETERED PAD MOUNT
PEDESTAL
1-42
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Temporary Power Outlet Panels
Dimension Drawings
9.50
9.50
9.50
1
LOAD CENTERS &
CIRCUIT BREAKERS
6.13
36.38
A N B
6.13
A N B
19.25
64.30
19.25
71.50
6.13
GRADE
METER LIGHTED SURFACE
GRADE
9.50
24.00
24.00
UNMETERED PEDESTAL
27.88
UNMETERED LIGHTED PEDESTAL
9.50
6.13
METER AT BOTTOM SURFACE
12.50
A
N
B
43.25
19.25
UNMETERED PAD MOUNT
BACK-TO-BACK-PEDESTAL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-43
Temporary Power Outlet Panels
Dimension Drawings
9.50
LOAD CENTERS &
CIRCUIT BREAKERS
1
9.50
12.50
A
12.50
A
N
B
N
B
87.63
80.38
19.25
19.25
GRADE
GRADE
24.00
24.00
METERED LIGHTED
BACK-TO-BACK PEDESTAL
METERED BACK-TO-BACK
PEDESTAL
9.50
9.50
12.50
A
N
B
12.50
A
N
B
19.25
74.50
19.25
GRADE
GRADE
24.00
24.00
UNMETERED LIGHTED
BACK-TO-BACK PEDESTAL
1-44
67.25
UNMETERED BACK-TO-BACK
PEDESTAL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Temporary Power Outlet Panels
Dimension Drawings
9.50
1
9.50
LOAD CENTERS &
CIRCUIT BREAKERS
12.50
A
12.50
A
N
B
N
B
87.63
80.38
19.25
19.25
GRADE
GRADE
24.00
24.00
METERED LIGHTED
BACK-TO-BACK PEDESTAL
METERED BACK-TO-BACK
PEDESTAL
9.50
9.50
12.50
A
N
B
12.50
A
N
B
19.25
74.50
19.25
67.25
GRADE
GRADE
24.00
24.00
UNMETERED LIGHTED
BACK-TO-BACK PEDESTAL
UNMETERED BACK-TO-BACK
PEDESTAL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-45
LOAD CENTERS &
CIRCUIT BREAKERS
1
Notes
1-46
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2SPEEDFAX
TM
2007-2008 Meter Centers
Contents
Single and Multiple Meter Sockets
General Information
Bypass Type Meter Sockets
2-2
2-3
Commercial Meter Sockets
2-7 – 2-9
Accessories—Selection
Knockout Diagrams
2-10
2-11 – 2-17
Meter Main and Meter Load Center Combinations
Catalog Number Logic
Surface Mount Meter Mains, 1ø, 3-Wire 120/240V AC
2-18
2-19 – 2-21
EUSERC-Approved Meter-Main & Meter-Load Centers 100 – 200A
2-22
EUSERC-Approved Meter-Load Centers 200 – 225A
2-23
EUSERC-Approved Meter-Load Centers 250A
2-24
EUSERC-Approved Meter-Load Centers 300 – 400A
2-25
Electricenter Accessories
Dimensions, Wiring Schematics, Knockout Codes
2-26
2-27 – 2-37
Modular Metering
Residential and Commercial
Series Ratings Chart
Service Entrance Modules—Selection
2-38 – 2-39
2-40
2-41 – 2-43
Residential Meter Modules—Ring and Ringless Style
2-44 – 2-45
Commercial Meter Modules
2-46 – 2-51
Wiring and Knockout Diagrams
2-52 – 2-69
Uni-Pak Meter Centers
General Information
2-70
Ring Style Meter Centers (100,000A IR)
2-71
Ringless Style Meter Centers (100,000A IR)
2-72
Ring Style Meter Centers Lever Bypass
2-73
Uni-Pak Accessories
2-74
Wiring Diagrams—125A, 200A
2-75
Knockout Diagrams
2-76 – 2-80
Modular and Uni-Pak Metering Accessories
2-81
Modular Metering Replacement Parts Kits
2-82
Modular Meter Lug Data & Bus Duct Units
2-83
EUSERC—Commercial Type By Meter Main Combinations
2-84
EUSERC—Commercial Type By Load Center Combinations
2-85
EUSERC—Wiring Diagrams
2-86
EUSERC—Dimensions & Knockout Diagrams
2-87
Residential Commercial Industrial
METER
CENTERS
2-4 – 2-6
2
Residential Meter Sockets
Meter Centers
Meter Mounting Devices
General
METER
CENTERS
2
General Information
Materials:
16 gauge, galvanized steel, G-90
Block Material:
Glass reinforced polyester
Enclosures:
NEMA 3R
Terminals:
Residential - Tin-plated aluminum
extrusions 6061-T6
Commercial - Tin-plated copper and
or tin plated aluminum
Finish:
Steel - Light gray, baked on powder
polyester
Latches:
All swing latches are stainless steel
Siemens meter mounting devices utilize
the high quality Landis & Gyr design
known throughout the utility industry for
more than 50 years. Siemens meter
sockets are built for safety, ease of
installation, and long term quality. That is
why we use stainless steel hardware,
polyester powder coat paint for long
lasting protection, and Type G-90
galvanized steel for all of our enclosures.
It is also why we use an all-copper
current path in our commercial sockets.
All of this means that the Siemens’
Landis & Gyr brand is recognized
throughout the industry as the quality
leader.
Standards:
Products cataloged herein meet or
exceed the following standards:
UL 486B, UL 414, NEMA 250,
ANSI C12.7 UL File #30413
Accessories:
All hubs, closure plates, and 5th
terminals, if included, are factory
installed.
▪ Residential single position sockets
(types SUAT) feature a quad neutral as
a standard feature
▪ Most commercial sockets include
a ground lug & some models are
available with line & load lugs installed
▪ Lever bypass sockets feature the
Landis & Gyr type HQ socket which is
recognized by utilities as the industry
standard for durability & quality
▪ Siemens features one of the most
complete and comprehensive meter
socket lines available from any
manufacturer
Features:
▪ All enclosures feature type G90
galvanized steel with a durable
polyester powder coat finish
S40407-02CO
7-Jaw 3ø 4W 200 Amp Lever
Bypass Type “HQ”
2-2
SUAS877-PPZA
4-Jaw 1ø 3W 200 Amp Residential Horn
Bypass - Sidewire Design
S48707-82GP
7-Jaw 3ø 4W 320 Amp Lever Bypass
Type HQ - Sidewire Design
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
SUAT417-XG
4-Jaw 1ø 3W 200 Amp Residential No Bypass
Meter Centers
Meter Socket Bypass Types
General
There are several different bypass types used in the meter socket industry. The type of bypass used is dependent upon each
individual utilities’ requirements for that application. The illustrations and photos below will explain some of the basic bypass
types seen in section 2 of the Siemens’ speedfax. This page is meant for informative purposes only and is not meant to imply
or convey the use of any particular bypass or inter-changing of any types of bypass for any application. The local utility should
always be contacted to ensure approval of equipment prior to installation. The types of bypasses listed below are for utility
use only.
2
Horn Bypass:
Lever Bypass:
A lever is used to rotate a plated copper blade between the line and load jaws. The
Landis & Gyr lever bypass HQ socket also clamps on the meter when the bypass is
dis-engaged. The bypass must be engaged to remove the meter then dis-engaged
after the meter is installed. The bypass acts as an alternate path for current flow
which helps to mitigate any arcing if the meter is being removed. This also ensures a
constant current flow should the meter need to be removed.
Test Block Bypass:
Test Block Bypass sockets (TBB) have the line and load connectors mounted parallel
to one another. This provides for a provision to bypass the meter by placing a jumper
on the line and load bus. Note that this type of bypass is used primarily by those
utilities subscribing to the EUSERC metering standards.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-3
METER
CENTERS
Small tabs or “horns” on the line and load side of the meter socket act as electrical
connection points for the utility to install a bypassing means- usually a specially
produced wire or “jumper” designed for this specific application.
Meter Centers
Single Position Meter Sockets—Residential Types
METER
CENTERS
2
Selection
SUAT111-0PGP
SUAT111-0MXA
SUAT111-0GF
135 Amp Continuous Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 600V 1 Position
Catalog
Number
HORN BYPASS
SUAT111-0PZA
SUAT111-0PDN
SUAT111-0PGP
SUAT111-0PQG
NO BYPASS
SUAT111-0JCA
SUAT111-0G
SUAT111-PG
SUAT111-0MXA
SUAT111-0GF
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
No. of
Jaws
5th
Jaw
Hub
KO
Fig.
11.7
11.7
11.7
11.7
8.0
8.0
8.0
8.0
3.7
3.7
3.7
3.7
135
135
135
135
OH/UG
OH/UG
OH/UG
OH/UG
#14-2/0
#14-2/0
#14-2/0
#14-2/0
4
4
4
4
EC659-0121
EC659-0121
EC659-0121
EC659-0121
RX
RX
RX
RX
Opening
Opening
Opening
Opening
1
1
1
1
11.7
11.7
11.7
11.7
11.7
8.0
8.0
8.0
8.0
8.0
3.7
3.7
3.7
3.7
3.7
135
135
135
135
135
OH/UG
OH/UG
UG
OH/UG
OH/UG
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
4
4
4
5
4
EC659-0121
EC659-0121
EC659-0121
Installed
EC659-0121
RX Opening
RX Opening
None
RX Opening
RX Opening
1
1
1
1
1
Notes
List
Price $
99.05
106.50
107.57
95.85
108.63
104.37
99.05
101.18
92.66
135 Amp Continuous Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 600V 1 Position
Catalog
Number
NO BYPASS
SUAT121-0GWR
SUAT121-BGWR
SUAT121-PGWR
SUAT121-BM
SUAT121-0BCO
SUAT121-BBCO
SUAT121-PBCO
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
No. of
Jaws
5th
Jaw
Hub
KO
Fig.
11.7
11.7
11.7
11.7
11.7
11.7
11.7
135
135
135
135
135
135
135
OH/UG
OH
UG
OH
OH/UG
OH
UG
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
4
4
4
5
5
5
5
EC659-0121
EC659-0121
EC659-0121
Installed
Installed
Installed
Installed
RX Opening
EC38597 Inst.
None
EC38597 Inst.
RX Opening
EC38597 Inst.
None
1
1
1
1
1
1
1
8.0
8.0
8.0
8.0
8.0
8.0
8.0
3.7
3.7
3.7
3.7
3.7
3.7
3.7
Notes
List
Price $
103.31
106.50
99.05
103.31
108.63
107.57
108.63
Contact utility or sales office for approval by your local utility prior to installation.
Includes 7/16" Barrel lock KO for utility security lock.
Includes 7/8" Barrel lock KO for utility security lock.
Stainless steel latch and hasp.
All devices on this page come with a ground lug. Quad
neutrals are standard on every SUAT1, SUAT3, & SUAT4
device.
2-4
Sealing ring included.
For Duquense Light & Power.
Approved for Florida Meter Group - overhead only.
For use in the Consolidated Edison territory.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Single Position Meter Sockets—Residential Types
Selection
2
METER
CENTERS
SUAT317-0PGP
SUAT417-XGF
SUAS877-PPZA
200 Amp Continuous/250 Amp Max Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 600V 1 Position
Catalog
Number
HORN BYPASS
SUAT317-0PGP
SUAT317-0PDN
SUAT317-0FP
SUAT317-0PZA
SUAT317-0PQG
SUAT317-0PCV
SUAT417-XPQG
SUAT417-XFP
SUAT417-0PQG
SUAS877-PPDN
SUAS877-PPZA
SUAS877-PPGP
SUAS877-PPZ
SUAS817-PPGP
SUAS877-PPCV
NO BYPASS
SUAT317-0MXA
SUAT317-0GF
SUAT317-0G
SUAT317-DGZ
SUAT417-XGDU
SUAT417-XGF
SUAT417-XG
SUAT417-PG
SUAT517-PDG
SUAT618-XGNM
SUAS877-PG
SUAS818-PGNM
SUAS917-XJCA
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
(kcmil)
No. of
Jaws
5th
Jaw
Hub
KO
Fig.
14.8
14.8
14.8
14.8
14.8
14.8
14.8
14.8
14.8
14.0
14.0
14.0
14.0
14.0
14.0
8.0
8.0
8.0
8.0
8.0
8.0
11.0
11.0
11.0
13.0
13.0
13.0
13.0
13.0
13.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.1
5.1
5.1
5.1
5.1
5.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
OH
OH
OH
OH
OH
OH
OH/UG
OH/UG
OH/UG
UG-SW
UG-SW
UG-SW
UG-SW
UG-SW
UG-SW
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
4
4
5
4
4
4
4
5
4
4
4
5
4
4
4
EC659-0121
EC659-0121
Installed
EC659-0121
EC659-0121
EC659-0121
EC659-0121
Installed
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
RX Opening
RX Opening
RX Opening
RX Opening
RX Opening
RX Opening
RX CL. Plate
RX CL. Plate
RX Opening
None
None
None
None
None
None
2
2
2
2
2
2
3A
3A
3A
6
6
6
6
8
8
14.8
14.8
14.8
14.8
14.8
14.8
14.8
14.8
19.0
22.0
14.0
14.0
17.0
8.0
8.0
8.0
8.0
11.0
11.0
11.0
11.0
13.5
11.0
13.0
13.0
13.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.1
4.5
5.1
5.1
5.1
200
200
200
200
200
200
200
200
200
200
200
200
200
OH
OH
OH
OH
OH/UG
OH/UG
OH/UG
UG
UG
OH/UG
UG-SW
UG-SW
OH/UG-SW
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
5
4
4
4
4
4
4
4
4
4
4
4
4
Installed
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0120
EC659-0121
RX Opening
RX Opening
RX Opening
EC38599 Inst.
RX CL. Plate
RX CL. Plate
RX CL. Plate
None
None
RX CL. Plate
None
None
RX CL. Plate
2
2
2
2
3A
3A
3A
3B
4
5
6
8
7
Notes
List
Price $
203.42
202.35
203.42
138.45
138.45
223.65
187.44
203.42
214.07
264.12
267.32
275.84
264.12
275.84
290.75
203.42
161.88
146.97
131.00
204.48
138.45
192.77
103.31
166.14
320.57
264.12
280.10
285.42
200 Amp Continuous/250 Amp Max Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 600V 1 Position
Catalog
Number
NO BYPASS
SUAT327-0MCO
SUAT327-0GWR
SUAT427-PMCO
SUAT427-XMWR
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
No. of
Jaws
5th
Jaw
Hub
KO
Fig.
Notes
List
Price $
14.8
14.8
14.8
14.8
200
200
200
200
OH
OH
UG
OH/UG
#6-350
#6-350
#6-350
#6-350
5
4
5
4
Installed
EC659-0121
Installed
EC659-0121
RX Opening
RX Opening
None
RX CL. Plate
2
2
3B
3A
140.58
123.00
174.66
161.88
8.0
8.0
11.0
11.0
4.5
4.5
4.5
4.5
Contact utility or sales office for approval by your local utility prior to installation.
Includes 7/16" Barrel lock KO for utility security lock.
Includes 7/8" Barrel lock KO for utility security lock.
Stainless steel latch and hasp.
A quad neutral is standard on all SUAT1, SUAT3, &
SUAT4 devices.
Device has line side studs. For use in the
Niagra-Mohawk territory.
Discount Schedule RESI
Sealing ring included.
For use in the Consolidated Edison territory.
For use in the Florida Meter Group territory.
“-SW” indicates an offset or side wire design. Meter is
on right.
May be used for overhead services in the EUSERC
territories.
Duquense Light & Power.
“-SW” indicates an offset or side wire design. Meter is
on left.
For use on the Atlantic Electric & Delmarva Service areas
only.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-5
Meter Centers
Single & Multiple Position Meter Sockets—Residential Types
METER
CENTERS
2
Selection
SUA2311-0PGP with EC659-0121 installed
WSC250C
SUA2717-YPGP
100 Amp/Position Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 300V Multi-Position
Catalog
Number
HORN BYPASS
SUA2311-0PGP
SUA2311-0PQG
SUA3311-0PGP
SUA3311-0PQG
SUA4311-0PGP
SUA4311-0PQG
Dimensions (inches) Bus
H
W
D
Amps
Cont.
Amps
Service
No. of
Pos.
No. of
Jaws
12.0
12.0
12.0
12.0
12.0
12.0
100
100
100
100
100
100
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
2
2
3
3
4
4
4
4
4
4
4
4
24.0
24.0
32.0
32.0
40.0
40.0
4.5
4.5
4.5
4.5
4.5
4.5
100
100
135
135
180
180
5th
Jaw
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
Hub
Notes
KO
Fig.
Line
Lugs
Load
Lugs
RX
RX
RX
RX
RX
RX
16
16
17
17
18
18
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
#14-2/0
Opening
Opening
Opening
Opening
Opening
Opening
List
Price $
324.83
347.19
455.82
477.12
590.01
610.25
200 Amp/Position Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 300V Multi-Position
Dimensions (inches)
Catalog
Number
HORN BYPASS
SUA2717-YPDN
SUA2717-YPGP
SUA2717-YPQG
SUA2717-YPZA
SUA3717-YPDN
SUA3717-YPGP
SUA3717-YPZA
SUA4719-YPDN
SUA4719-YPGP
SUA4719-YPQG
SUA4719-YPZA
SUA5719-KPGP
SUA5719-KPDN
SUA6719-KPQG
SUA6719-KPZA
H
W
D
Bus
Cont.
Amps Amps
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
24.0
24.5
24.0
24.0
32.0
33.3
32.0
43.0
43.0
43.0
43.0
51.0
51.0
59.0
59.0
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
200
200
200
200
270
270
270
360
360
360
360
450
450
528
528
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Service
No. of No. of 5th
Pos.
Jaws Jaw
Hub
Notes
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
2
2
2
2
3
3
3
4
4
4
4
5
5
6
6
HD Opening
HD CL. Plate
HD Opening
HD Opening
HD Opening
HD CL. Plate
HD Opening
HD Opening
HD CL. Plate
HD Opening
HD Opening
2-HD Opening
2-HD Opening
2-HD Opening
2-HD Opening
4
5
4
4
4
5
4
4
5
4
4
4
4
4
4
EC659-0121
Installed
EC659-0121
EC659-0121
EC659-0121
Installed
EC659-0121
EC659-0121
Installed
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
EC659-0121
Line
KO Lugs
Fig. (kcmil)
19
19
19
19
20
20
20
21
21
21
21
22
22
23
23
#1/0-600
#1/0-600
#1/0-600
#1/0-600
#1/0-600
#1/0-600
#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
(2)#1/0-600
Load
Lugs List
(kcmil) Price $
#6-350 337.61
#6-350 337.61
#6-350 358.91
#6-350 337.61
#6-350 498.42
#6-350 498.42
#6-350 498.42
#6-350 597.47
#6-350 597.47
#6-350 617.70
#6-350 597.47
#6-350 687.99
#6-350 772.13
#6-350 1082.04
#6-350 1082.04
100/80 Amp/Position Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 300V Multi-Position
Dimensions (inches)
Catalog
Number
NO BYPASS
WSC150C
WSC250C
WSC350C
WSN251CR
WSN351CR
WSN451CR
H
W
D
Bus
Cont.
Amps Amps
11.3
11.3
11.3
13.5
13.5
13.5
15.3
30.5
45.5
16.8
25.5
34.1
3.8
3.8
3.8
4.1
4.1
4.1
200
200
200
80
80
80
100
100
100
Service
No. of No. of 5th
Pos.
Jaws Jaw
Hub
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
1
2
3
2
3
4
1.25" KO
1.25" KO
1.25" KO
RX CL. Plate
RX CL. Plate
RX CL. Plate
5
5
5
5
5
5
WSX019
WSX019
WSX019
Installed
Installed
Installed
Notes
Line
KO Lugs
Fig. (kcmil)
Load
Lugs List
(kcmil) Price $
24
25
26
30
31
32
#8-2/0
#8-2/0
#8-2/0
#8-2/0
#8-2/0
#8-2/0
#6-4/0
#6-4/0
#6-4/0
#6-250
#6-250
#6-250
165.00
330.00
497.00
404.70
588.95
773.19
Contact utility or sales office for approval by your local utility prior to installation.
Unit
Center
Includes 7/16" Barrel lock KO for utility security lock.
Includes 7/8" Barrel lock KO for utility security lock.
For Duquense Light & Power.
Ground lug included.
(2) Ground lugs included.
2-6
Sealing ring included.
is unbussed and indoor.
feed.
End feed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Devices are gangable. Use strap #WSX008M to gang
devices together. For use in New York City only
(Con Ed).
Discount Schedule RESI
Meter Centers
Single Position Meter Sockets—Commercial/Industrial Types
Selection
2
METER
CENTERS
S40405-02CO
S40407-02CO
S9804-9142
200 Amp Continuous Meter Mounting Equipment, Ringless Type, Lever Bypass, 1-Phase, 3-Wire
Catalog
Dimensions (inches)
Number
H
W
D
4 OR 5 TERMINAL
S40404-02QG
19.0
13.0
5.0
S40405-02QG
19.0
13.0
5.0
S40405-015F
19.0
13.0
5.0
S42505-02RG
19.0
13.0
5.0
S40405-025
19.0
13.0
5.0
S40405-02CO
19.0
13.0
5.0
S40405-0BNU
28.0
13.0
5.0
S48805-0BNU
22.0
16.0
5.0
S44305-02CV
19.0
13.0
5.0
Cont.
Amps
Service
Lugs
No. of
Jaws
Hub
Opening
KO
Fig.
200
200
200
200
200
200
200
200
200
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
#6-350 kcmil
#6-350 kcmil
#6-350 kcmil
3/8-24 Stud
#6-350 kcmil
#6-350 kcmil
#6-350 kcmil
#6-350 kcmil
#6-350 kcmil
4
5
5
5
5
5
5
5
5
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX Opening
RX CL. Plate
HD CL. Plate
9
9
9
9
9
9
9
10
9
Notes
List
Price $
431.00
478.19
473.93
463.28
459.02
459.02
448.37
548.48
578.00
200 Amp Continuous Meter Mounting Equipment, Ringless Type, Lever Bypass, 3-Phase, 4-Wire 600V
Catalog
Number
7 TERMINAL
S40007-01GP
S40407-02QG
S40407-025
S40407-015F
S40407-02CO
S40407-01NU
S9804-9142
S48807-02NU
S44307-02CV
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
17.0
19.0
19.0
19.0
19.0
19.0
20.0
22.0
19.0
200
200
200
200
200
200
200
200
200
OH
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
UG-SW
OH/UG
OH/UG
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
#6-350
10.0
13.0
13.0
13.0
13.0
13.0
16.0
16.0
13.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
kcmil
No. of
Jaws
Hub
Opening
KO
Fig.
Notes
List
Price $
7
7
7
7
7
7
7
7
7
RX Opening
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX CL. Plate
RX Opening
RX CL. Plate
RX CL. Plate
HD CL. Plate
10
9
9
9
9
9
33
10
9
—
594.27
594.27
604.92
604.92
581.49
532.50
717.81
630.48
630.00
Contact utility or sales office for approval by your local utility prior to installation.
Lugs
For
Includes 7/16" Barrel lock KO for utility security lock.
Includes 7/8" Barrel lock KO for utility security lock.
Stainless steel latch and hasp
Ground lug included
(2) Ground lugs included
Discount Schedule RESI
not included, order separately
5-jaw devices can be used for 3-phase 3-wire service if
an isolated neutral kit is used.
For use in the Florida Meter Group territory.
For use in the Consolidated Edison territory.
For use in the Northeast Utilities service area.
use in the Atlantic Electric & Delmarva Service areas.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-7
Meter Centers
Single Position Meter Sockets—Commercial/Industrial Types
METER
CENTERS
2
Selection
S47704-02
S9817-8061
S48104-02
320 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, Lever Bypass, 1-Phase, 3-Wire
Catalog
Dimensions (inches)
Number
H
W
D
4 OR 5 TERMINAL
S48704-82GP
34.0
20.0
6.0
S48104-02
31.0
16.0
5.0
S48504-92
28.0
13.0
5.0
S47604-81GP
28.0
13.0
5.0
S47704-02
28.0
14.0
6.0
S47704-01NU
28.0
14.0
6.0
S9804-9144
25.0
16.0
6.0
S9804-9146
34.0
20.0
6.0
S47605-02SP
28.0
13.0
5.0
S47705-01NU
28.0
14.0
6.0
S48105-83BU
31.0
16.0
5.0
S44704-8265
20.0
34.0
6.0
Cont.
Amps
Service
Lugs
No. of
Jaws
Hub
Opening
KO
Fig.
Notes
List
Price $
320
320
320
320
320
320
320
320
320
320
320
320
OH/UG-SW
OH/UG-SW
UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG-SW
OH/UG-SW
#4-600
3/8-24 Stud
3/8-24 Stud
#4-600
1/2-20 Stud
1/2-20 Stud
3/8-24 Stud
3/8-24 Stud
3/8-24 Stud
1/2-20 Stud
#4-600
#4-600
4
4
4
4
4
4
4
4
5
5
5
4
HD CL. Plate
HD CL. Plate
None
HD Opening
HD CL. Plate
HD Opening
HD Opening
HD CL. Opening
HD CL. Plate
HD Opening
HD CL. Plate
HD CL. Plate
11
14
35
12
13
13
13
11
12
13
14
11
719.94
1016.01
759.35
743.37
787.04
647.52
498.42
749.76
460.08
773.19
717.81
1135.29
320 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, Lever Bypass, 3-Phase, 4-Wire 600V
Catalog
Number
7 TERMINAL
S47707-01NU
S47707-02
S48707-82GP
S9804-9145
S9804-9147
Dimensions (inches)
H
W
D
Cont.
Amps
Service
Lugs
No. of
Jaws
Hub
Opening
KO
Fig.
Notes
28.0
28.0
34.0
25.0
34.0
320
320
320
320
320
OH/UG
OH/UG
OH/UG-SW
OH/UG
OH/UG
1/2-20 Stud
3/8-24 Stud
#4-600
3/8-24 Stud
3/8-24 Stud
7
7
7
7
7
HD
HD
HD
HD
HD
13
14
11
34
11
14.0
14.0
20.0
16.0
20.0
6.0
6.0
6.0
6.0
6.0
Opening
CL. Plate
CL. Plate
Opening
Opening
List
Price $
773.19
773.19
870.11
634.74
890.34
400 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, No Bypass, 3-Phase, 4-Wire 600V
Catalog
Dimensions (inches)
Cont.
Number
H
W
D
Amps
7 TERMINAL - Landis & Gyr Type K7 Bolt-in Socket
S9817-8061
34.0
20.0
6.0
400
Service
Lugs
No. of
Jaws
Hub
Opening
KO
Fig.
Notes
List
Price $
UG
1/2-20 Stud
7
HD CL Plate
15
1917.00
Contact utility or sales office for approval by your local utility prior to installation.
Includes 7/16" Barrel lock KO for utility security lock.
Includes 7/8" Barrel lock KO for utility security lock.
Stainless steel latch and hasp.
Ground lug included.
(2) Ground lugs included.
2-8
Anti-inversion clip included.
Lugs not included, order separately.
Bolt-in meter socket.
No bypass installed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lugs should be chosen based on # of cables, size of
wire, and size of stud. See accessories section for more
information.
“-SW” indicates offset or side wire design. Meter is
on right.
Discount Schedule RESI
Meter Centers
EUSERC Meter Sockets—Test Block Bypass & Transformer Rated Metering
Selection
2
METER
CENTERS
MS44UTB
MS14TB
MS24TB
Ring Type EUSERC-Approved Safety Sockets (Test Block Bypass)
Catalog
Number
Dimensions (inches )
L
W
D
MS14TB
MS15TB
MS17TB
MS24TB
MS25TB
MS27TB
241⁄8
241⁄8
241⁄8
301⁄8
301⁄8
301⁄8
123⁄8
123⁄8
123⁄8
141⁄8
141⁄8
141⁄8
43⁄4
43⁄4
43⁄4
61⁄8
61⁄8
61⁄8
MS44UTB
341⁄2
153⁄8
61⁄4
Amps
Cont. Duty
100
200
320
Service
Hub
No. of
Jaws
5th Jaw
1ø-3W
3ø-3W
3ø-4W
1ø-3W
3ø-3W
3ø-4W
RX
RX
RX
RX
HC
RX
4
5
7
4
5
7
UX005B
INSTALLED
—
UX001WL
INSTALLED
—
1ø-3W
HD
4
—
Wire Range
Cu/AI
#6-2/0 Box Lug
#1/0-250 kcmil
Lay-in Lug
(2)1/0-250 kcmil or
(1)#4-600 kcmil
KO
Fig.
List
Price $
39
39
39
40
41
40
545.00
720.00
781.00
1017.00
1194.00
1343.00
44
2500.00
400 Ampere Transformer Rated CT-Meter Cabinet,
(No Disconnect) 600V AC Max.
Catalog
Number
Dimensions (inches)
Height Width
Depth
No. of Jaws
Hub
KO Fig.
52.00
52.00
24.00
24.00
11.00
11.00
4
5
—
—
42
42
1317.00
1329.00
52.00
24.00
11.00
8
—
42
1419.00
13
15
RX
—
43
42
749.76
2192.00
List Price $
1 Phase-3 Wire
RTU121814
RTU121815
3 Phase-3 Wire
RTU121818
3 Phase-3 Wire or 3 Phase-4 Wire
RT121413
RTU122015
20.00
52.00
12.00
36.00
4.63
11.00
RTU121815
CT Mounting Bases-400 Amp Max.
Catalog Number
Service
RT6019A
RT6019HA
RT6067A
RT6067HA
1
1
3
3
Max. AIC
Phase/3 Phase-3 Wire 10,000
Phase- 3 Wire
50,000
Phase- 4 Wire
10,000
Phase- 4 Wire
50,000
Wire Range
(2)
(2)
(2)
(2)
NEMA
NEMA
NEMA
NEMA
Studs
Studs
Studs
Studs
List Price $
356.00
447.00
665.00
779.00
Contact utility or sales office for approval by your local utility prior to installation.
RT6019A
Ground lug included.
CT mounting base not included, order from chart below.
Includes Test Switch mounting provision, and hub
opening for overhead feed.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-9
Meter Centers
Accessories
Selection
H56476
H58852
2
H56732
METER
CENTERS
RX Hub
H58022
S64685-1 Neutral Kit
ECJS
EC659-0121
S35815-2
SRSTD
SRSS
5TH & 6TH Jaw Assemblies
SRSW
Interchangeable Hubs
For Use With
Catalog Number
List
Price $
All SUAxxxx single and multiple position sockets
All SUAxxxx single and multiple position sockets
All Lever Bypass single position sockets
SC and SD Unbussed Multiple-5th Jaw
Anti-Inversion clip for use with 320amp sockets
when required
EC659-0121-grounded
EC659-0120-insulated
S35815-2
WSX019
H59676
18.00
18.53
123.54
11.40
24.50
Description
Catalog Number
List
Price $
Snap-On Type, aluminum
Snap-On Type, steel
Screw Type, aluminum
SRSTD
SRSS
SRSW
Description
Miscellaneous Accessories
Closure Plate
Description
Catalog Number
Insulated Neutral Kit for “S404xx” sockets
Isolated Neutral Kit for S9817-8061
Bypass Kit for S9817-8061
Jumper-200 Amp Rated-use on SUAxxx
sockets only
Plastic Meter Cover- Ring
Plastic Meter Cover- Ringless
Neutral Isolation kit for 200amp lever
bypass sockets
EC64685
S69685-1
S69623
ECJS
ECPP
ECCP3
64690-1
EC38594
EC38596
EC38597
EC38598
EC38599
EC38600
EC38595
03⁄4
1
11⁄4
11⁄2
2
21⁄2
—
22.90
37.81
37.81
23.96
23.96
107.57
38.34
ECHC200
ECHC250
ECHC300
ECHC000
2
21⁄2
3
—
72.00
108.00
175.00
24.00
EC56856
EC56857
EC56858
EC9747-1113
EC56933S
3
31⁄2
4
—
—
178.92
263.06
119.28
28.76
76.68
HD CONDUIT HUBS
64.00
218.00
132.06
36.74
19.00
21.00
34.08
List
Price $
HC CONDUIT HUBS
Closure Plate
List
Price $
Hub Size
(Inches)
RX CONDUIT HUBS
Sealing Rings
17.47
19.38
25.03
Catalog Number
Adapter Plate convert HD to RX
Closure Plate
Lugs for Sockets with Stud Terminals햲
Catalog Number
For Use With
Wire Range
List Price $
H58852
H56732
H56476
H58022
H55890
Line side of S9817 Socket on UG Applications
Line & Load of S477 & Load/Neutral of S9817 Sockets
Line & Load of S477 & Load/Neutral of S9817 Sockets
Any socket with 3/8" Stud Terminals
Any socket with 3/8" Stud Terminals
(1)
(2)
(1)
(2)
(1)
47.50
35.00
44.00
33.00
22.00
햲
3/0-800 kcmil
#4-350 kcmil
3/0-800 kcmil
#6-250 kcmil
#6-350 kcmil
Each lug catalog number contains one lug unless
otherwise noted. Order enough lugs to cover all
terminations.
2-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Knockout Diagrams
Selection
2
METER
CENTERS
Figure 1
Figure 2
Figure 3
KNOCKOUTS (inches):
Figure 3B
Figure 4
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-11
Meter Centers
Knockout Diagrams
METER
CENTERS
2
Selection
Figure 5
Figure 8
Figure 6
Figure 7
Figure 9
Figure 10
KNOCKOUTS (inches):
Figure 11
2-12
Figure 12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Meter Centers
Knockout Diagrams
Selection
2
METER
CENTERS
Figure 13
Figure 15
Figure 14
Figure 17
Figure 16
KNOCKOUTS (inches):
Figure 18
Figure 19
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-13
Meter Centers
Knockout Diagrams
METER
CENTERS
2
Selection
Figure 21
Figure 20
Figure 23
Figure 22
Figure 24
KNOCKOUTS (inches):
Figure 25
2-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Meter Centers
Knockout Diagrams
Selection
2
METER
CENTERS
Figure 26
Figure 27
Figure 28
KNOCKOUTS (inches):
Figure 29
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-15
Meter Centers
Knockout Diagrams
METER
CENTERS
2
Selection
Figure 30
Figure 31
Figure 33
Figure 32
KNOCKOUTS (inches):.
Figure 34
2-16
Figure 35
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
Meter Centers
Knockout Diagrams
Selection
KNOCKOUTS (inches):
Figure 38
Figure 40
Figure 39
RX
E
E
J
Figure 41
Figure 42
J
E
J
Figure 43
Figure 44
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-17
METER
CENTERS
Figure 37
1/4
1/2
1/2, 3/4
1/2, 3/4, 1, 1-1/4, 1-1/2
3/4, 1, 1-1/4, 1-1/2, 2
1, 1-1/4
1, 1-1/4, 1-1/2, 2
1, 1-1/4, 1-1/2, 2, 2-1/2
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2
2, 2-1/2, 3
2-1/2, 3, 3-1/2
2-1/2, 3, 3-1/2, 4
1/4, 1/2, 7/8
1/4, 1/2
1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4, 1, 1-1/4
1, 1-1/2, 2, 2-1/2, 3
3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
1/4, 1/2, 3/4
1, 1-1/4, 1-1/2, 2, 2-1/2, 3
쏗4.281 HUB 0P
쏗2.750 HUB 0P
2
Figure 36
䊎:
A:
B:
L:
N:
P:
R:
S:
X:
Z:
EE:
GG:
HH:
AB:
AC:
AD:
AE:
AF:
AG:
AH:
AI:
HD:
RX:
Meter Centers
Catalog Number Logic
Combination Meter Sockets
30
40
B
1
200
S
E
C
W
METER
CENTERS
2
MC
Main Ampere
Rating
1 = 1-Phase
3 = 3-Phase
ML or L = Main Lug
MB or B = Main Breaker
Circuits
(max. No. of circuits)
Spaces
(max. No. of 1" breakers)
MM = Meter Main
MC = Meter Load Center Combination
2-18
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
F/S =
R=
J=
B=
E=
D/C =
L=
T=
W=
M=
H=
Flush / Surface Mounting
Ringless (blank = ring type)
5th Jaw
Horn Bypass
EUSERC Approved
UG Feed Only / OH/UG feed
Lever Bypass Socket
Feed Thru Lugs
Wide Load Center Design
Field Addable Sub Feed Main
Double Hub Provision
Meter Centers
Surface Mount Meter Mains, 1-Phase, 3-Wire 120/240V AC
UL listed
MM0202ML1100S
MM0202ML1125H
100A meter main (field
added), OH feed only
125A meter main
(field added)
MM0406L1200X
MM0202BXXX
MM0404L1400RLM
200A meter main (field
added), side hinge door
125 and 200A meter mains,
side hinge door
400A meter main, side hinge
door, provisions for two field
installed mains
Pad locking provisions on all devices
Horn bypass and 5th jaw available as noted
Side hinged door with one screw removal where shown
Suitable for use only as service entrance equipment
Contact local utility to confirm meter socket placement
prior to installation
2
▪
▪
▪
▪
▪
▪
Selection
MM0202B1XXXRJBX
125, 150, and 200A meter
main (factory installed), side
hinge door.
METER
CENTERS
▪ See end of section for dimensions and wiring diagrams
Overhead/Underground 1-Phase, 3-Wire SN
Meter Main Combinations
Ampere Main
Rating Breaker
UL:
Overhead/
No. of No. of UnderSpaces Circuits ground
EUSERC:
Overhead/ Short
UnderCircuit
ground
Rating
Dimensions (inches)
Catalog Number
Hub
5th
Provision Jaw
Height Width Depth
RX
2-RX
2-RX
2-RX
2-RX
18.00
17.00
19.75
19.75
19.75
Cover
Type
List
Foot
Price $ Notes
Main Breaker Field Installed
100
125
200
200
200
QP
QP
1-QN/2-QP
1-QN/2-QP
1-QN/2-QP
2
2
4
4
4
2
2
6
6
6
OH
OH
OH/UG
OH/UG
OH/UG
OH
OH
OH
—
—
10,000
22,000
22,000
22,000
22,000
MM0202ML1100S
MM0202ML1125H
MM0406L1200H
MM0406L1200RH
MM0406L1200RHJB
400
(2) QN(R),
QN(R)H,
QP, QPH
2
2
OH/UG
—
22,000
MM0404L1400RLM HD
—
—
OH
—
OH
—
—
OH/UG
OH/UG
OH/UG
22,000
22,000
22,000
22,000
22,000
22,000
22,000
22,000
22,000
22,000
MM0202B1125RJB
MM0202B1150RJB
MM0202B1150
MM0202B1150R
MM0202B1200
MM0202B1200R
MM0202B1200RJB
MM0202B1125RJBX
MM0202B1150RJBX
MM0202B1200RJBX
EC5J
EC5J
EMC5J
EMC5J
Installed
7.375
16.00
17.125
17.125
17.125
4.00
5.00
5.00
5.00
5.00
Ring
366.00 1
Ring
498.00
Ring
965.00
Ringless 996.00
Ringless 1030.00 2
S35815-2 29.00 27.00
6.00
Ringless 2923.00 3
Installed
Installed
EMC5J
EMC5J
EMC5J
EMC5J
Installed
Installed
Installed
Installed
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.14
5.14
5.14
Ringless
Ringless
Ring
Ringless
Ring
Ringless
Ringless
Ringless
Ringless
Ringless
Main Breaker Factory Installed
125
150
150
150
200
200
200
125
150
200
NEW
Q2125H
QN2150H
QN2150H
QN2150H
QN2200H
QN2200H
QN2200H
Q2125H
QN2150H
QN2200H
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
For inches / millimeters conversion,
see Application Data section.
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
17.00
17.00
17.00
17.00
17.00
17.00
17.00
17.00
17.00
17.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
18.42
18.42
18.42
1752.00
1752.00
1736.00
1736.00
1752.00
1736.00
1752.00
1752.00
1752.00
1752.00
2
2
2
2, 3
2, 3
2, 3
햲
Shipped standard with two units per carton.
Each unit supplied with 1.25" hub.
Device has horn bypass.
햴 Devices with “X” suffix include an extra wide utility
section.
햳
Listed by Underwriters‘ Laboratories, Inc., under file
#E10703 vol. 1.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-19
Meter Centers
NEW
METER
CENTERS
2
Surface Mount Meter Load Centers, 1-Phase, 3-Wire 120/240V AC 150-200A
Selection
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
UL listed
Overhead and underground feed applications
Underground feed accomplished by use of removable gutter trough
Load wires bottom or back exit only
22,000 AIC rated
Pad locking provisions on all devices
Side hinge doors removable by backing out only one screw
Suitable for use only as service entrance equipment
RX type hub provision on top end wall
HC type hub provision on bottom end wall
Field addable 5th Jaw (EC5J2)
Contact local utility to confirm meter socket placement prior to
installation
▪ See end of section for dimensions and wiring diagrams
MC0606L1200R (Shown)
MC0606L1200RJB
MC0606L1200RA
MC0408B1150T (Shown)
MC0408B1200T
MC0408B1150RT
MC0408B1200RT
MC0816B1150CT (Shown)
MC0816B1200CT
MC0816B1150RCT
MC0816B1200RCT
MC2040B1150RC (Shown)
MC2040B1200RC
MC2040B1150RJBC
MC2040B1200RJBC
200A, main lug, 6 circuit
(Twelve 1" spaces), for use
with up to six 2-pole breakers
150 or 200A, main breaker,
four 1" spaces, feed thru
lugs provided
150 or 200A, main breaker,
eight 1" spaces, feed thru
lugs provided
150 or 200A, main breaker,
twenty 1" spaces provided
Ampere
Rating
Main
Breaker
No. of
Spaces
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
MBK150
MBK150
MBK150
MBK150
MBK150
MBK150
—
—
—
MBK200
MBK200
MBK200
MBK200
MBK200
MBK200
4
4
8
8
20
20
12
12
12
4
4
8
8
20
20
No. of
Circuits
8
8
16
16
40
40
6
6
6
8
8
16
16
40
40
Catalog Number
Replaced
Catalog Number
Dimensions
Height Width
Depth
Cover
Type
List
Price $
Notes
MC0408B1150T
MC0408B1150RT
MC0816B1150CT
MC0816B1150RCT
MC2040B1150RC
MC2040B1150RJBC
MC0606L1200R
MC0606L1200RJB
MC0606L1200RA
MC0408B1200T
MC0408B1200RT
MC0816B1200CT
MC0816B1200RCT
MC2040B1200RC
MC2040B1200RJBC
MC0408MB1150T
MC0408MB1150RT
—
—
MC2040MB1150R
—
MC0606ML1200R
MC0606ML12RB
—
MC0408MB1200T
MC0408MB1200RT
—
—
MC2040MB1200R
—
30.0
30.0
32.0
32.0
36.0
36.0
27.0
27.0
27.0
30.0
30.0
32.0
32.0
36.0
36.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Ring
Ringless
Ring
Ringless
Ringless
Ringless
Ringless
Ringless
Ringless
Ring
Ringless
Ring
Ringless
Ringless
Ringless
1318.00
1318.00
1387.00
1387.00
2540.00
2522.00
1188.00
1216.00
1250.00
1318.00
1318.00
1387.00
1387.00
2540.00
2522.00
3
3
3
3
3
3,
1,
1,
1,
3
3
3
3
3
3
Notes:
1. No main breaker provided. Accept QN or QP type 2 or
4-pole breakers.
2. Suitable for use as service entrance equipment when
not more than six disconnecting means are provided
and when not used as a lighting an appliance panel
board.
2-20
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
5
2, 3
2, 3, 5
2, 3, 4
3. Due to wire space restrictions on the trough side, the
left side of the interior is limited to a 60A max branch.
4. Aluminum enclosure.
5. Horn bypass and 5th jaw included.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Surface Mount Meter Load Centers, 1-Phase, 3-Wire 120/240V AC 100-200A
UL listed
MC0816B1XXXH
MC0816B1XXXT
200A OH/UG feed, 8 circuit,
with feed thru lugs.
200A Trailer Panel,
OH feed only, 8 circuits
with feed thru lugs.
MC2040B1150(R)/
MC2040B1200(R)/
MC1224B1125
MC0816B1400RLTM/
MC0816B1350RLTM
200A, 20 Circuit, Side by
Side Meter Combo
One factory installed main,
provisions for up to 200A
field installed main, 8 circuits.
22,000 AIC Rated
Pad locking provisions on all devices
Side hinge doors removable by backing out only one screw
Suitable for use only as service entrance equipment
Contact local utility to confirm meter socket approval prior to installation
2
▪
▪
▪
▪
▪
▪
▪
Selection
See end of section for dimensions and wiring diagrams
METER
CENTERS
Overhead/Underground: 1-Phase, 3-Wire SN (22,000A IR)
Meter Load Center Combinations
UL:
Overhead/
Ampere Main
No. of No. of UnderRating Breaker
Spaces Circuits ground
125
Q2125H
12
24
OH/UG
125
EQ9675R
12
24
OH/UG
150
QN2150RH 8
16
OH
150
QN2150RH 8
16
OH/UG
150
QN2150RH 8
16
OH/UG
150
QN2150RH 20
40
OH/UG
150
QN2150RH 20
40
OH/UG
200
QN2200RH 8
16
OH
200
QN2200RH 8
16
OH
200
QN2200RH 8
16
OH/UG
200
QN2200RH 8
16
OH/UG
200
QN2200RH 20
40
OH/UG
200
QN2200RH 20
40
OH/UG
350
QN2150H 8
16
OH/UG
400 NEW QN2200H 4
8
OH/UG
400
QN2200H 8
16
OH/UG
햲
햳
Feed thru lugs included.
Side by side design for OH/UG applications.
Discount Schedule RESI
EUSERC:
Overhead/
Underground
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
햴
Dimensions (inches)
Hub
Catalog Number
Provision
MC1224B1125
RX
MC1224MB1125R
HS
MC0816B1150T
RX
MC0816B1150TH
2-RX
MC0816B1150RTH 2-RX
MC2040B1150
RX
MC2040B1150R
RX
MC0816B1200T
RX
MC0816B1200RT
RX
MC0816B1200TH
2-RX
MC0816B1200RTH 2-RX
MC2040B1200
RX
MC2040B1200R
RX
MC0816B1350RLTM HD
MC0408B1400RLTM HD
MC0816B1400RLTM HD
5th
Jaw
EMC5J
EC5J
—
EMC5J
EMC5J
EMC5J
EMC5J
—
—
EMC5J
EMC5J
EMC5J
EMC5J
—
—
—
Height
16.00
34.00
29.00
21.00
21.00
18.00
18.00
29.00
29.00
21.00
21.00
18.00
18.00
29.00
29.00
29.00
Width
22.89
14.12
12.00
22.89
22.89
22.89
22.89
12.00
12.00
22.89
22.89
22.89
22.89
27.00
27.00
27.00
Depth
5.00
5.00
5.12
5.00
5.00
5.00
5.00
5.12
5.12
5.00
5.00
5.00
5.00
6.00
6.00
6.00
Cover
List
Type
Price $
Ring
1620.00
Ringless 1620.00
Ring
1387.00
Ring
1360.00
Ringless 1360.00
Ring
2585.00
Ringless 2522.00
Ring
1387.00
Ringless 1387.00
Ring
1360.00
Ringless 1360.00
Ring
2585.00
Ringless 2522.00
Ringless 3940.00
Ringless 3591.00
Ringless 3940.00
Foot
Notes
2
2
1, 3
1, 3
1, 3
2
2
1, 3
1, 3
1, 2
1, 2
2
2
1
1
1
Over/under design for OH applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-21
Meter Centers
METER
CENTERS
2
EUSERC Meter Main & Meter Load Centers (100-200A) Single Phase, 3-Wire 240V AC
▪
▪
▪
▪
▪
▪
UL listed
▪
▪
▪
▪
Side hinge door removable by backing out only one screw
▪
▪
▪
▪
5th jaw accessory available (ECMC5J)
For overhead and underground feed applications
Selection
MM0406L1125SEC (shown)
MM0406L1125FEC
MM0406L1200SEC (shown)
MM0406L1200FEC
125A Max, main lug meter
main, between the studs
construction
200A Max, main lug meter
main, between the studs
construction
Designed to meet EUSERC standards
22,000 AIC Rated
Pad locking provisions on all devices
Surface and semi-flush units available - semi flush rails
are depth adjustable for 2x6 studs
Load wiring may exit top or bottom
Suitable for use only as service entrance equipment
RX type hub provision on top endwall, HC type hub
provision on bottom endwall
Ring type meter covers
Contact local utility to confirm meter socket approval prior to installation
See end of section for dimensions and wiring diagrams
MC0816B1200SCTM (shown)
MC0816B1200FCTM
200A Pump Panel, OH/UG
Feed, 8 circuits with feed thru
lugs, and provisions for up to
50A second main breaker
Amps
Max.
100
100
100
100
125
125
125
125
125
200
200 NEW
200
200
200
200
200
200
225
225
햲
Main
Breaker
Q2100H
Q2100H
Q2100H
Q2100H
Q2125H
Q2125H
Q2125H
QP, QPH
QP, QPH
EQ9985
EQ9985
EQ9985
EQ9985
QN, QNH, QP, QPH
QN, QNH, QP, QPH
QN2200RH
QN2200RH
EQ9986
EQ9986
MC1224B1100SEC (shown)
MC1224B1100FEC
MC1224B1125SEC
MC1224B1125FEC
MC2442B1XXXSEC (shown)
MC2442B1XXXFEC
100 and 125 Amp, 12 circuit,
between the studs
construction
200 and 225 Amp, 24 circuit,
between the studs
construction
Mounting
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Flush
Surface
Surface
Flush
Flush
Surface
Flush
Surface
Surface
Surface
Flush
Surface
No. of
Spaces
12
12
16
16
12
12
16
4
4
8
8
24
24
4
4
30
40
24
24
Dimensions shown are representative of outside box
length, width, and depth and do not include allowances
for mounting bumps, endwalls, covers, hubs or hardware
protrusions. Dimensions are subject to change.
2-22
햳
햴
Max.
Circuits
24
24
32
32
24
24
32
6
6
16
16
48
48
6
6
40
40
42
42
Service
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
OH/UG
Catalog Number
MC1224B1100FEC
MC1224B1100SEC
MC1632B1100FEC
MC1632B1100SEC
MC1224B1125FEC
MC1224B1125SEC
MC1632B1125FEC
MM0406L1125FEC햳
MM0406L1125SEC햳
MC0816B1200SCTM
MC0816B1200FCTM
MC2442B1200FEC
MC2442B1200SEC
MM0406L1200FEC햳
MM0406L1200SEC햳
MC3040B1200SECW햴
MC4040B1200SECW햴
MC2442B1225FEC
MC2442B1225SEC
Dimensions 햲
Height
269⁄16
269⁄16
309⁄16
309⁄16
269⁄16
269⁄16
309⁄16
269⁄16
269⁄16
409⁄16
409⁄16
409⁄16
409⁄16
309⁄16
309⁄16
321⁄4
321⁄4
409⁄16
409⁄16
MC4040B1200SECW (shown)
MC3040B1200SECW
200A, Wide Load Center
Design, Meter Combo
Width
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
141⁄2
21
21
141⁄2
141⁄2
Depth
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
51⁄8
51⁄8
71⁄2
71⁄2
List
Price $
976.00
976.00
818.00
818.00
1668.00
1667.00
1743.00
515.00
515.00
1711.00
1711.00
2600.00
2600.00
1756.00
1804.00
2614.00
2923.00
2856.00
2856.00
Main breaker not included.
FRK1 - Flush rail kit.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
NEW
EUSERC Meter Load Center Combinations (200-225A) Single Phase, 3-Wire 240V AC
▪
▪
▪
▪
▪
▪
▪
UL listed
▪
▪
▪
▪
▪
Side hinge door removable by backing out only one screw
Selection
Designed to meet EUSERC standards
Underground Feed Applications Only
Load wiring may exit top or bottom
22,000 AIC Rated
2
Pad locking provisions on all devices
METER
CENTERS
Surface and semi-flush units available - semi flush units
are depth adjustable for 2x6 stud applications
Suitable for use only as service entrance equipment
HC type hub provision on bottom endwall
5th jaw accessory available
Contact local utility to confirm meter socket approval
prior to installation
▪ See end of section for dimensions and wiring diagrams
MC1212L1200SED (shown)
MC1212L1200FED
MC3042B12XXFED (shown)
MC3042B12XXSED
MC2042B1200FED
MC2042B1200SED
Main lug device with
provisions for up to six
2-pole breakers.
Amps
Max.
200 NEW
200 NEW
200 NEW
200 NEW
200 NEW
200 NEW
225 NEW
225 NEW
Main
Breaker
NA
NA
MBK200A
MBK200A
MBK200A
MBK200A
MBK225A
MBK225A
Mounting
Flush
Surface
Flush
Surface
Flush
Surface
Flush
Surface
No. of
Spaces
12
24
20
20
30
30
30
30
Main breaker device with a 200
or 225A main, and provisions
for 20 or 30 full 1" breaker
provisions.
Max.
Circuits
12
12
40
40
42
42
42
42
Max.
2-Pole
6
6
10
10
14
14
14
14
Catalog Number
MC1212L1200FED햲
MC1212L1200FED햲
MC2040B1200FED
MC2040B1200SED
MC3042B1200FED
MC3042B1200SED
MC3042B1225FED
MC3042B1225SED
Height
385⁄16
385⁄16
4113⁄16
4113⁄16
485⁄16
485⁄16
485⁄16
485⁄16
Dimensions 햲
Width
145⁄16
145⁄16
145⁄16
145⁄16
145⁄16
145⁄16
145⁄16
145⁄16
Depth
75⁄16
75⁄16
75⁄16
75⁄16
75⁄16
75⁄16
75⁄16
75⁄16
List
Price $
1376.00
1376.00
2600.00
2600.00
3140.00
3140.00
3366.00
3366.00
NEW
The new ECTPD1 can be installed on
meter combo’s listed on this page. It is a
replacement door for the lower pull
section that has a weatherproof GFCI
receptacle cover햳. Use the receptacle for
temporary power then carry it to the next
job site, or leave it for customer use.
ECTPD1
햲
Suitable for use as service entrance equipment when not
more than six main disconnecting means are provided
and when not used as a lighting and appliance panel
board.
Discount Schedule RESI
햳
Consists of a door, hinges, and weatherproof cover. GFCI
receptacle not included.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-23
Meter Combinations
NEW
EUSERC Meter Load Center Combinations (250A) Single Phase, 3-Wire 240V AC
Selection
General
▪ UL Listed
▪ Back to Back design – Meter section faces outdoor, load center
METER
CENTERS
2
faces indoor
▪
▪
▪
▪
▪
250A max, 200A continuous rating
Copper bussing and wiring forms
22,000 AIC rated
Suitable for use only as service entrance equipment
See end of section for dimensions and wiring diagrams
Meter Section
▪ Designed to meet EUSERC standards
▪ Flush mounting enclosure, adjustable for 2x4 or 2x6 stud
applications
Load Center Trim/Cover
▪ Underground feed applications only
▪ Factory installed 200A main breaker, provisions for up to 50A
max. secondary main breaker
▪
▪
▪
▪
Pad locking provisions on all devices
Side hinge doors removable by backing out only one screw
HC type hub provision on bottom endwall
Contact local utility to confirm meter socket approval prior to
installation
Load Center Section
▪
▪
▪
▪
Load Center View
Load wires top exit only
Trim mounting tabs free up both hands for trim screw installation
INSTA-WIRE™ neutrals
Visible neutrals
Side View
햲
햳
Meter Main View
Main
Ampere
Rating햲
Main
Breaker
Type햲
Aux Breaker
Max Ampere
Rating
Auxiliary
Breaker
Type햳
No. of
Spaces
No. of
Circuits
Dimensions
Catalog Number
Height
Width
Depth
200
200
QNH
QNH
50
50
QP, QPH
QP, QPH
24
30
42
42
MC2442B1250FE2
MC3042B1250FE2
473⁄8
473⁄8
143⁄8
143⁄8
73⁄4
73⁄4
List
Price $
2800.00
3360.00
Factory installed main breaker.
Field installed main breaker, 2-pole only, 50A max rating.
2-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
NEW
Meter Load Centers Single Phase, 3-Wire 240V AC
Selection
▪ UL Listed
▪ 400A Max, 320A Continuous
▪ Meter socket options include 320A (400A max) lever bypass, nonbypass, test block bypass, and bolt on
▪ Load center options include a meter main, 8 space panel with feed
through lugs, 24 space
2
22,000 AIC Rated
Accepts HD Type Hubs
METER
CENTERS
▪
▪
▪
▪
▪
▪
Factory installed flush mount option
Surface mount devices accept field added flush rails
Suitable for use only as service entrance equipment
Contact local utility to confirm meter socket acceptance prior to
installation
Surface Mount 8 space, 16
circuit panel with factory
installed 200A main and
provisions for 2nd 60-200A
field installed main
Surface Mount Meter Main
With Provisions for Two
60-200A Main Breakers
▪ See end of section for knock out diagrams and wiring schematics
Accessories
Surface Mount 24 space, 42
circuit panel with factory
installed 400A Main Breaker
Surface Mount 30 space,
42 circuit panel with factory
installed 200A Main Breaker
and Provisions for 2nd 60-200A
Field Installed Main
Catalog Number
MM0404L1400SC
MM0404L1400FD
MM0404L1400SCS
MM0404L1400FDS
MC0816B1400SC
Replaces
New
New
New
New
New
MC0816B1400FD
New
MC0816B1400SCS
New
MC0816B1400FDS
New
MC2442B1400SDB
MC2442B1400SD
MC3042B1400SD
MC3042B1400SDB
MC2442MB14B
New
MC3040MB21
MC3040MB22
MC3040MB21SS
MC3040MB22SS
MC3040MB22B
MC3042B1400SDL
MC3040MB22L
MC3042B1400FD
New
MC3042B1400SC
New
MC3042B1400FDS
New
MC3042B1400SCS
New
MC3042B1400SDS
Main Breaker
(2) Field QP(H), QNR(H)
(2) Field QP(H), QNR(H)
(2) Field QP(H), QNR(H)
(2) Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory JXD
Factory JXD
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Factory QN2200RH
Field QP(H), QNR(H)
Description
Flush Rail Kit for UG
only devices
Flush Rail Kit for OH/UG
feed devices
2" HD Type Hub
2 1/2" HD Type Hub
3" HD Type Hub
3 1/2" HD Type Hub
4" HD Type Hub
HD Closure Plate
Snap on Sealing Ring
Stainless Steel Screw
Type Sealing Ring
(2) #6-350 kcmil
(1) #2-600 kcmil
(2) 500-1000 kcmil
Flush Mount Front View
Catalog Number
ECFRK1
ECFRK2
EC56854
EC56855
EC56856
EC56857
EC56858
EC56933S
SRSS
SRSW
UK350TA
UK600TA
UK1000TA
Spaces
4
4
4
4
8
Circuits
2
2
2
2
16
Mounting
Surface
Flush
Surface
Flush
Surface
Meter
Socket
Plug In
Plug In
Test Block
Test Block
Plug In
Feed
OH/UG
UG
OH/UG
UG
OH/UG
Dimensions
Height Width
3911⁄16
331⁄8
3911⁄16
301⁄8
3911⁄16
331⁄8
3911⁄16
301⁄8
3911⁄16
331⁄8
Depth
63⁄8
73⁄8
63⁄8
73⁄8
63⁄8
8
16
Flush
Plug In
UG
3911⁄16
301⁄8
73⁄8
8
16
Surface
Test Block
OH/UG 3911⁄16
331⁄8
63⁄8
8
16
Flush
Test Block
UG
3911⁄16
301⁄8
73⁄8
24
24
30
42
42
42
Surface
Surface
Surface
Bolt In
Plug In
Plug In
UG
UG
UG
3911⁄16
3911⁄16
3911⁄16
301⁄8
301⁄8
301⁄8
63⁄8
63⁄8
63⁄8
30
42
Surface
Test Block
UG
3911⁄16
301⁄8
63⁄8
30
42
Surface
Bolt In
UG
3911⁄16
301⁄8
63⁄8
30
42
Surface
Lever Bypass
UG
3911⁄16
301⁄8
63⁄8
30
42
Flush
Plug In
UG
3911⁄16
301⁄8
73⁄8
30
42
Surface
Plug In
OH/UG 3911⁄16
331⁄8
63⁄8
30
42
Flush
Test Block
UG
3911⁄16
301⁄8
73⁄8
30
42
Surface
Test Block
OH/UG 3911⁄16
331⁄8
63⁄8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-25
Meter Centers
Electricenter Accessories
Selection
RX Type Hub
2
UX001WL
METER
CENTERS
SRSTD
MCJM
HS Type Hub
SRSW
Interchangeable Hubs
Conduit
Size
(Inches)
Lbs.
Grounding Bars (AI/Cu — except where noted)
Catalog Number
List
Price $
ECHS075
ECHS100
ECHS125
ECHS150
ECHS200
ECHS250
39.50
39.50
39.50
39.50
69.00
109.00
HS Type Hubs
3
⁄4
1
11⁄4
11⁄2
2
21⁄2
Grounding bars are for use where grounding of electrical outlets and devices is
by means of conductors. Each bar is equipped with large connectors rated for one
#14-1/0 or, two or three #14-10 Cu/AI and small connectors rated for one #14-6 or,
two #14-12 Cu/AI. (May be restricted by wire bending space.)
Length
RX Type Hubs
3
⁄4
1
11⁄4
11⁄2
2
21⁄2
EC38594
EC38596
EC38597
EC38598
EC38599
EC38600
22.90
37.81
37.81
23.96
23.96
107.57
ECHV200
ECHV250
ECHV300
ECHV350
ECHV400
91.00
125.00
182.00
274.00
362.00
HV Type Hubs
2
21⁄2
3
31⁄2
4
ECHC200
ECHC250
ECHC300
Adapter
Plate
ECHCRXA
EC9747-1113 (HD to RX)
22.50
28.76
Closure
Plates
ECHC000
ECHS000
ECHV000
EC38595 (RX Type)
EC56933S (HD Type)
24.00
38.00
23.50
38.34
76.68
EC56856
EC56857
EC56858
List Price $
0
4
ECLX068M
11.80
25⁄16
7
2
5
ECLX069M
15.60
31⁄2
11
3
8
ECLX071M
15.60
45⁄8
15
4
11
ECLX072M
17.70
53⁄4
19
5
14
ECLX073M
18.60
7
23
6
17
ECLX074M
25.50
81⁄8
27
7
20
ECLX075M
28.50
Catalog Number
List Price $
Snap-on type, aluminum
SRSTD
17.47
Screw type, aluminum
SRSW
25.03
Miscellaneous Accessories
Description
HD Type Hubs
3
31⁄2
4
Catalog Number
4
Description
72.00
108.00
175.00
Accessories and Closure Plates
Small
15⁄8
Sealing Rings
HC Type Hubs
2
21⁄2
3
Number of Connectors
Total
Large
178.92
263.06
119.28
Catalog Number
List Price $
Plastic Meter Opening Cover
ECPP
19.00
Plastic Meter Cover Ringless
ECCP3
21.00
NEMA Stud Mechanical Lugs
(2) #6-350 kcmil
(1) #2-600 kcmil Al/Cu
(2) #500-1000 kcmil Al/Cu
UK350TA
UK600TA
UK1000TA
55.00
49.50
64.00
5th jaw
EMC5J
72.00
Neutral Feeder Lugs
#2-1/0
ECLK1-2
13.90
#4-2/0
ECLK2
18.40
#1-350 kcmil
ECLK3
24.00
Order
2-26
one for each phase and neutral.
See catalog number tables for replacement main information for each meter combination.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Dimensions and Wiring Schematics
Selection
2
METER
CENTERS
MC0408B1150T / MC0408B1200T /
MC0408B1150RT / MC0408B1200RT
MC0606L1200 / MC0606L1200R / MC0606L1200RA
14.2
SERVICE
DISCONNECT
50 AMP MAX
6.9
1
2
A2
B2
3
4
6
7
8
EQPT GRD
5
9
10
11
12
B1
A1
40.6
13
14
16
N1
(5X) L
M
MC0816B1150CT / MC0816B1200CT /
MC0816B1150RCT / MC0816B1200RCT
4(X) A
C
N2
N4
G1
N3
MC0816B1200SCTM
Knockout Code — Conduit Sizes
12.5
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
5.3
RX HUB
29.0
K
(2X) .31
J
A3 B3
FEED THRU
TERMINALS
NEUTRAL
15
G
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
MC0816B1200T / MC0816B1200RT
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-27
Meter Centers
Dimensions and Wiring Schematics
Selection
23.5
5.3
METER
CENTERS
2
(2X) RX HUB
H
(3X) A
(2X) G
(4X) C
(3X) .31
MC0816B1200TH / MC0816B1150RTH / MC0816B1200RTH
(4X) B
C
30.260
C
(4X) B
(2X) H
(2X) H
(11X) A
(11X) A
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
N
B
9
8
16
A
N
Equipment
Ground
N1
(2X) C
9 (200A maximum)
8
16
N1
(16X) A
(2X) C
(2X) F
(16X) A
(2X) F
(11X) B
H
1
B
39.555
Neutral
A
Service
Disconnect
Service
Disconnect
(200A maximum)
1
Equipment
Ground
Test
By-pass
Neutral
39.555
Test
By-pass
(11X) B
H
MC0816B1400FDST
MC0816B1400FDT
33.260
33.260
Service
Disconnect
(200A maximum)
A
Test
By-pass
N
B
Service
Disconnect
(200A maximum)
1
9
8
16
A
39.555
N
(2X) C
Equipment
Ground
N1
(16X) A
(11X) B
MC0816B1400SCST
2-28
9
8
16
B
N1
(2X) C
(2X) F
H
Service
Disconnect
(200A maximum)
1
Neutral
Neutral
39.555
Test
By-pass
Service
Disconnect
(200A maximum)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
(16X) A
(2X) F
H
(11X) B
MC0816B1400SCT
Equipment
Ground
30.260
MC0816B1350RLTM / MC0816B1400RLTM
Meter Centers
Dimensions and Wiring Schematics
Selection
2
METER
CENTERS
MC1212L1200FED
14.2
C
RX Hub
(2X) H
1
1
3.5
2
6.9
(2X) L
2
6.9
3
3
4
4
5
5
6
7
6
7
8
8
9
9
A2
B2
A2
10
10
B2
11
11
12
13
12
13
14
15
15
16
17
18
19
A1
B1
20
21
22
14.2
M
G1
J
(4X) A
EQPT GRD
ECGB5, ECGB10 or ECGB14
C
MC1224B1100SEC
Knockout Code — Conduit Sizes
(2X) H
1
3.5
2
6.9
3
4
(2X) L
5
6
7
8
9
A2
B2
10
11
12
13
14
EQPT GRD
15
16
26.6
17
18
19
A1
B1
20
ECGB5 or
ECGB10 only
SERVICE
DISCONNECT
23
24
(5X) L
NEUTRAL
21
22
J
N1
N2
G1
C
M
23
24
(5X) L
EQPT GRD
ECGB5, ECGB10 or ECGB14
(3X) A
ECGB5 or
ECGB10 only
SERVICE
DISCONNECT
MC1224B1100FEC
(2X) N
20
21
22
N1
(4X)A
C
B1
SERVICE
DISCONNECT
N2
J
19
A1
NEUTRAL
M
16
17
18
ECGB5 or
ECGB10 only
23
24
(5X) L
26.6
EQPT GRD
26.6
14
EQPT GRD
14.2
NEUTRAL
(3X) A
(2X) N
MC1212L1200SED
N1
G1
N2
EQPT GRD
ECGB5, ECGB10 or ECGB14
(4X)A
C
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
MC1224B1125FEC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-29
Meter Centers
Dimensions and Wiring Schematics
Selection
14.2
RX Hub
1
2
3
6.9
4
5
6
7
8
9
A2
B2
10
2
11
12
13
14
EQPT GRD
METER
CENTERS
15
16
26.6
17
18
19
A1
B1
20
ECGB5 or
ECGB10 only
SERVICE
DISCONNECT
23
24
(5X) L
M
N1
G1
N2
EQPT GRD
ECGB5, ECGB10 or ECGB14
J
(4X) A
C
MC1224B1125 / MC1224B1125R
(3X) A
14.2
(2X) N
MC1224B1125SEC
14.2
C
(2X) H
RX Hub
3.5
6.9
(2X) L
30.6
30.6
(5X) L
(5X) L
M
J
M
(4X)A
C
J
(4X) A
C
MC1632B1100FEC
(3X) A
14.2
(2X) N
MC1632B1100SEC
14.2
C
(2X) H
RX Hub
3.5
6.9
6.9
(2X) L
30.6
30.6
J
(5X) L
(5X) L
M
M
(4X)A
C
J
(4X) A
C
MC1632B1125FEC
2-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEUTRAL
21
22
MC1632B1125SEC
Meter Centers
Dimensions and Wiring Schematics
Selection
23.5
RX Hub
5.3
2
METER
CENTERS
34.0
J
H
(3X) A
(2X) G
(4X) C
(3X) .31
MC2040B1150 / MC2040B1150R /
MC2040B1200 / MC2040B1200R
MC2040B1150RC / MC2040B1150RJBC /
MC2040B1200RC / MC2040B1200RJBC
MC2040B1200FED
MC2040B1200SED
Knockout Code — Conduit Sizes
3.5
6.9
(2X)L
40.6
(5X)L
M
J
(4X)A
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
C
MC2442B1200FEC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-31
Meter Centers
Dimensions and Wiring Schematics
Selection
14.2
RX Hub
METER
CENTERS
2
6.9
40.6
(5X) L
M
J
(4X)A
C
MC2442B1200SEC
MC2442B1250FE2
30.260
30.260
Service
Disconnect
Service
Disconnect
1
A
N
22
A
N
1
22
21
42
B
B
39.555
42
(2X) C
Equipment
Ground
N1
N1
(16X) A
(2X) C
H
2-32
(11X) B
(16X) A
(2X) F
(2X) F
H
(11X) B
MC2442B1400SD
MC2442B1400SDB
MC3042B1200FED (shown) / MC3042B1225FED
MC3042B1250FE2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Equipment
Ground
21
Neutral
Neutral
39.555
Meter Centers
Dimensions and Wiring Schematics
Selection
C
(4X) B
30.260
(2X) H
(11X) A
Service
Disconnect
(200A maximum)
21
42
B
N1
(2X) C
Equipment
Ground
Neutral
N
METER
CENTERS
A
22
(16X) A
(2X) F
(11X) B
H
MC3042B1200SED / MC3042B1225SED
C
MC3042B1400FD
33.260
(4X) B
30.260
(2X) H
(11X) A
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
Test
By-pass
Test
By-pass
N
B
Service
Disconnect
(200A maximum)
1
22
A
N
Service
Disconnect
(200A maximum)
1
22
21
42
B
39.555
39.555
21
(2X) C
42
N1
(16X) A
Equipment
Ground
N1
(2X) C
(2X) F
H
Equipment
Ground
Neutral
Neutral
A
(16X) A
(2X) F
(11X) B
H
MC3042B1400FDS
(11X) B
MC3042B1400SC
Knockout Code — Conduit Sizes
33.260
Service
Disconnect
(200A maximum)
39.555
Test
By-pass
N
B
Service
Disconnect
(200A maximum)
1
22
21
42
N1
(2X) C
(16X) A
(2X) F
H
(11X) B
Equipment
Ground
Neutral
A
Test
By-pass
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
2
39.555
Service
Disconnect
(200A maximum)
1
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
MC3042B1400SCS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-33
Meter Centers
Dimensions and Wiring Schematics
Selection
30.260
30.260
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
N
A
39.555
N
Equipment
Ground
N1
(2X) C
(16X) A
(16X) A
(2X) F
(2X) F
H
42
B
Neutral
42
N1
(2X) C
21
22
B
21
22
Neutral
A
1
Equipment
Ground
1
39.555
METER
CENTERS
H
(11X) B
MC3042B1400SD
(11X) B
MC3042B1400SDB
30.260
30.260
Lever
By-pass
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
Service
Disconnect
(200A maximum)
1
39.555
N
39.555
Test
By-pass
Test
By-pass
N
B
21
42
Neutral
Neutral
21
N1
42
(2X) C
(16X) A
(16X) A
N1
(2X) F
(2X) F
H
22
B
A
(2X) C
Service
Disconnect
(200A maximum)
1
Equipment
Ground
A
22
Equipment
Ground
2
Service
Disconnect
(200A maximum)
H
(11X) B
MC3042B1400SDL
(11X) B
MC3042B1400SDS
20.9
RX HUB
5.0
32.3
K
(2X) M
(11X) A
(2X) L
C
MC4040B1200SECW
2-34
MM0202B1125RJBX / MM0202B1150RJBX / MM0202B1200RJBX
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Dimensions and Wiring Schematics
Selection
2
METER
CENTERS
MM0202B1150 / MM0202B1200 /
MM0202B1200R / MM0202B1200RJB
F
MM0202ML1100S
30.260
(11X) A
(4X) B
C
(2X) H
Service
Disconnect
(200A maximum)
N
B
N1
Neutral
A
39.555
Equipment
Ground
Service
Disconnect
(200A maximum)
F
(2X) H
B
MM0202ML1125H
MM0404L1400FD
30.260
Knockout Code — Conduit Sizes
(11X) A
(4X) B
C
(2X) H
Service
Disconnect
(200A maximum)
N
B
39.555
Service
Disconnect
(200A maximum)
Equipment
Ground
Test
By-pass
N1
B
(2X) H
Neutral
A
Test
By-pass
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
MM0404L1400FDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-35
Meter Centers
Dimensions and Wiring Schematics
Selection
33.260
Service
Disconnect
(200A maximum)
N
METER
CENTERS
A
B
Equipment
Ground
39.555
N1
(2X) H
B
MM0404L1400RLM
MM0404L1400SC
33.260
14.2
(2X)N
(2X)H
3.5
6.9
(2X)L
Service
Disconnect
(200A maximum)
N
B
Service
Disconnect
(200A maximum)
Equipment
Ground
A
Test
By-pass
N1
Neutral
39.555
Test
By-pass
26.6
(5X)L
M
(2X) H
B
J
MM0404L1400SCS
(4X)A
C
(3X)A
14.2
RX Hub
(2X)N
MM0406L1125FEC
14.2
C
(2X)H
3.5
6.9
6.9
(2X)L
26.6
30.6
(5X) L
M
(5X)L
M
J
(4X) A
C
J
MM0406L1125SEC
2-36
(4X)A
C
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MM0406L1200FEC
Neutral
2
Service
Disconnect
(200A maximum)
Meter Centers
Dimensions and Wiring Schematics
Selection
14.2
RX Hub
6.9
2
METER
CENTERS
30.6
(5X) L
M
GND
J
(4X) A
C
MM0406L1200SEC
MM0406L1200H / MM0406L1200RH
Knockout Code — Conduit Sizes
A =
B =
C =
D =
E =
F =
G=
H =
J =
K =
L =
M=
N=
P =
⁄2
⁄2, 3⁄4
1
⁄2, 3⁄4, 1
3
⁄4, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2
3
⁄4, 1, 11⁄4
1, 11⁄4, 11⁄2
1, 11⁄4, 11⁄2, 2, 21⁄2
11⁄4, 11⁄2, 2, 21⁄2, 3
1, 11⁄4, 2, 21⁄2, 3
3
⁄8, 1⁄2, 3⁄4
3
⁄4, 1, 11⁄4, 11⁄2, 2
1
⁄4
2, 21⁄2, 3, 31⁄2, 4
1
1
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-37
Meter Centers
METER
CENTERS
2
Modular Metering: Introduction
Siemens Modular Metering can be
adapted to almost every requirement in
residential and commercial group
metering applications. The design of
each module was completed with easy
handling, fast installation, and simplified
layout in mind.
The complete line can be furnished for
single phase three wire 120/240V AC
and three phase, four wire 120/Y208V
AC. Meter modules containing three
phase thru bussing and three phase
tenant mains are also rated for 240V AC
Delta Systems. All service entrance
devices are rated for 240V AC Max.
The incoming utility service can be
terminated in breaker, switch, or tap box
“service entrance modules”. Tap boxes
may be used when the total number of
meters is 6 or less. For those areas that
need to meet EUSERC requirements for
underground feed a separate pullbox is
available to attach to breaker devices up
to 1200amps. Switch devices with an
integral pullbox are available up to
800amps.
All 200amp meter modules offer short
circuit ratings up to 100,000A IR.
Modules are available to meet the wide
variety of bypass requirements from
utilities nationwide including horn
General
bypass, lever bypass, and test block
bypass. Residential modules (those with
no bypass or horn bypass) are available
in 2-6 positions. Commercial modules
with a lever bypass are available in 1-4
positions. Commercial modules with a
test block bypass are available in 1-3
positions.
All 320amp meter modules offer short
circuit ratings up to 42,000A IR if fully
rated. Higher ratings may be achieved
thru series ratings and are dependent
upon the breaker used as the service
disconnect.
Residential
Module
Features
Single Bolt Joint
The time-saving single bolt joint (SBJ)
provides for a single electrical connection
between meter modules- a Siemens
exclusive feature. The SBJ slips into one
module with the adjacent unit being
drawn towards it. The SBJ locks into
place via a bracket on the back of each
module- this keeps the SBJ stationary
and is the primary means of grounding
between modules.
Beveled edges on the SBJ allow for easy
positioning of the joint. Field installed
studs are located just above and below
the SBJ opening to compress the
surrounding gaskets together to form a
water-tight seal. For extra stability
additional nuts and bolts are included as
2-38
a means of physically joining the meter
stacks together both above and below
the SBJ opening.
Bus Construction
Un-metered bus is
surrounded by a barrier
and all in-accessible bus
connections are welded
for maximum strength. All
other connections- single
bolt joint and meter
socket connections, are
bolted and accessible.
Neutral & Ground Provisions
Grounds and Neutrals are
located on the bottom
end of the meter
modules. All grounds
and neutrals may be relocated to the top of the
enclosure if a top-exit is
needed (A siemens
exclusive feature). Each meter module
has small indents to help locate a fieldcut knockout if a top exit is preferred.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Breaker
Module
Switch
Module
Pull Box
Module
Tap Box
Module
Lever Bypass
Module
Text Block
Bypass Module
Tenant Breaker Provisions
Each single phase 200amp meter socket
has a provision for a 4-pole plug-in type
QPP circuit breaker. A 2-pole plug-in
125amp max may be used in these
positions with the use of a filler plate.
No other conversion kits are necessary
for this transition. Each single phase
125amp meter socket has a provision for
a 2-pole plug-in type QP circuit breaker.
Each breaker is adjacent to each meter
position. Generous gutter space allows
for wiring from top, bottom, or back of
the meter module. Each meter cover is
embossed to provide a location for the
unit (apartment) number.
Meter Centers
Modular Metering: Selection Information
General
2
METER
CENTERS
Pullbox w/
Landing Lugs
1
Main Device
2
Spacer 햲
Meter
Stack
3
4
Meter
Stack
Tap Box
5
6
A single bolt joint is required to connect all thru bussing. The application above requires (4) SBJ’s, one between each
bussed module. Two SBJ’s would be included (one with each meter stack) and two would have to be purchased for the
load side tap box and one for the spacer module to main breaker connection.
Selection Information
햲 Pullboxes have provisions to
field install lugs to accept
incoming and outgoing
conductors. The modules
should be used for
underground service feeds
when inspecting authorities
require the service to be split
WMMB1400
or used in conjunction with a
circuit breaker module when a EUSERC
specification for underground feed is
needed. Pullboxes are not meant for
stand-alone use- they must be used with a
service entrance breaker module.
햳 Most breaker and switch devices accept
incoming feeds from the top or bottom.
400-800amp switches are
invertible for top or bottom
feed. 1200amp switches
utilize a molded case switch
(looks like a breaker) and are
bottom feed only. Breaker
modules are available in
WMS44U
separate top and bottom feed
versions. A “BF” suffix on a
breaker module catalog number
designates bottom feed. Tap boxes may
be used as a main when 6 or less meter
positions are present. Tap boxes offer a
direct connection to the thru bus with no
overcurrent protection. Tap boxes are not
햲
intended to feed breaker or switch
modules via the thru bus. Breaker, switch,
and tap box modules do not come with a
single bolt joint.
햴 A spacer is required between
meter stack and main
disconnect or tap box when
installation is in EUSERC
metering jurisdictions. The
spacer can also be used to
extend the length of the
lineup when needed.
WMEX1U
햵 Meter stacks should be
selected to coincide with
the number of meter
positions required. All
thru bussing must be the
same as the service
entrance device (all single
phase or all three phase).
Each stack comes with a
WMM44AB200UR
single bolt joint coupler
and mounting rail. A single bolt joint
coupler is needed for each thru bus
connection. Utilities have varying
requirements on height restrictions, cover
types, and bypass types for each
application therefore utility acceptance
should be obtained prior to installation of
any modules.
햶 Order a circuit breaker
tenant main for each meter
position. Circuit breakers
must match phase of meter
socket. Determine proper
breakers from series rating
chart.
2-Pole QPP
햷 Tapboxes allow for a direct
connection to the thru
bussing. This is typically
used to feed meter modules
when 6 or less meters are
present, but it can also be
used to feed remote
equipment from a modular
meter installation such as a
current transformer cabinet. WMTB8U
As this is un-metered power it is the
installer’s responsibility to ensure utility
approval prior to installation.
Various accessories are available to help
customize the products to fit your application.
All breaker, switch, and tapbox modules
include (2) thru bus cover plates (cat #
WMEP) meant to cover the ends of the
installation. Additional cover plates are
available for order if needed. For applications
using a load-side tap box or breaker module
an additional single bolt joint coupler will be
needed (cat #’s SBJ1 for single phase, SBJ4
for three phase). Other accessories can be
found on page 2-81.
Spacers are required between meter stack and main
disconnect or tap box when installation is in EUSERC
metering jurisdictions. Check with other utilities prior to
installation.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-39
Meter Centers
Modular Metering: Common Series Rating Charts
Selection
Use the tables below to determine the correct combination of equipment and circuit breakers for the available fault current. This
chart provides series rating information for the most common applications. For a complete series rating chart please contact your
local sales office.
Residential / Commercial햲
2
Available Fault Current
RMS Symmetrical Amps at
120/240 Volts Maximum
METER
CENTERS
to 10,000
햴
Service Entrance햳
Modules
Series MPOU, WMPOU
MSU, WMSU
MC, WMC
MTBU, WMTBU 햵
to 22,000
햴
Series MSU, WMSU
MC, WMC
MTBU, WMTBU 햵
to 42,000
햴
Series MSU, WMSU
MC, WMC
햲
MTBU, WMTBU
to 65,000
햴
햵
Series MSU, WMSU
MC, WMC
MTBU, WMTBU 햵
to 100,000
Series MSU, WMSU
MTBU, WMTBU 햵
Metering Branch
Circuit Breakers
Load Center
Branch Circuit
Breakers
QP (15—125A)
QPP (125—200A)
QP, QPJ, QT, QPF, QE
QP (15—125A)
QPP (125—200A)
QPH (15—125A)
QPPH (125—200A)
QPH (15—125A)
QPPH (125—200A)
QPH (15—125A)
HQPP (125—200A)
HQP (15—125A)
HQPP (125—200A)
QPH (15—125A)
HQPP (125—200A)
HQP (15—125A)
HQPP (125—200A)
HQPPH (100—200A) 2-pole
HQPPH (100—200A) 2-pole
QP, QPJ, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
Commercial
Available Fault Current RMS
Symmetrical Amps at 120/240
Volts Maximum 1-phase,
240 Volts Maximum 3-phase
Service Entrance햳
Modules
Series MPOU, WMPOU
MSU, WMSU
to 10,000
MC, WMC
햴
MTBU, WMTBU 햵
Series MSU, WMSU
MC, WMC
to 22,000
햴
MTBU, WMTBU 햵
Series MSU, WMSU
MC, WMC
to 42,000
햴
MTBU, WMTBU 햵
Series MSU, WMSU
MC, WMC
to 65,000
햴
MTBU, WMTBU 햵
Series MSU, WMSU
to 100,000
MTBU, WMTBU햵
햲
This chart is applicable only with residential unified
meter modules. (Siemens sockets, 1-phase outgoing)
on pages 2-44 thru 2-45.
햳 MSU and WMSU fusible switch modules use Class T
fuses only. MPOU and WMPOU pullouts also use
Class T fuses.
2-40
햴
햵
Metering Branch
Circuit Breakers
QP (15—125A) 2-pole
QP (15—100A) 3-pole
QPP (125—200A) 2-pole
QJ2 (60—200A) 3-pole
QP (15—125A) 2-pole
QP (15—100A) 3-pole
QPP (125—200A) 2-pole
QJ2 (60—200A) 3-pole
QPH (15—125A) 2-pole
QPH (15—100A) 3-pole
QPPH (125—200A) 2-pole
QJH2 (60—200A) 3-pole
QPH (15—125A) 2-pole
QPH (15—100A) 3-pole
QPPH (125—200A) 2-pole
QJH2 (60—200A) 3-pole
QPH (15—125A) 2-pole
QPH (15—100A) 3-pole
HQPP (125—200A) 2-pole
QJ2-H (60—200A) 3-pole
HQP (15—125A) 2-pole
HQP (15—100A) 3-pole
HQPP (125—200A) 2-pole
QJ2-H (60—200A) 3-pole
QPH (15—125A) 2-pole
QPH (15—100A) 3-pole
HQPP (125—200A) 2-pole
HQJ2H
HQP (15—125A) 2-pole
HQP (15—100A) 3-pole
HQPP (125—200A) 2-pole
HQJ2H
HQPPH (100—200A) 2-pole
HQJ2H
HQPPH (100—200A) 2-pole
HQJ2H
Service entrance modules may not have suffix U
in number.
No overcurrent protection.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Load Center
Branch Circuit
Breakers
QP, QPJ, QT, QPF, QE
QP, QPJ, QT, QPF, QE
QP, QPJ, QT, QPF, QE
QP, QPJ, QT, QPF, QE
QP, QT, QPF, QE
QP, QPF, QE
QP, QT, QPF, QE
QP, QPF, QE
QP, QT, QPF, QE
QP
QP, QT, QPF, QE
QP
QP, QT, QPF, QE
QP, QT, QPF, QE
QP, QT, QPF, QE
QP,
QP,
QP,
QP,
QP,
QT,
QT,
QT,
QT,
QT,
QPF,
QPF,
QPF,
QPF,
QPF,
QE
QE
QE
QE
QE
Listed by Underwriters’ Laboratories, Inc., under file
#E10848(N).
Discount Schedule RESI
Meter Centers
Modular Metering: Circuit Breaker Service Entrance Modules
Selection
Features
햵
▪ 65,000 AIC Rated, 100,000 AIC Available
햶
▪ Devices available in top feed or bottom feed construction
햷
▪ Alternate amperage units available
2
햸
▪ All standard enclosures are Nema 3R rated
▪ Breaker modules include hanging bracket and end plates. Order
extra single bolt joint coupler if used as a load side disconnect, see
page 2-83 for accessories
400 Ampere Circuit
Breaker Module
600 Ampere Circuit
Breaker Module
Check local utility requirements prior to installation.
Circuit Breaker Modules
Ampere
Rating
Maximum
Interrupt
Rating
Outdoor Enclosure
Top
List
Feed
Price $
KO
Fig.
Bottom
Feed
List
Price $
Dimensions (inches)햲
KO
Fig.
Breaker
Type 햹
Line Terminal Lugs
No. & Size Per
Line & Neutral 햳
Height
Width
Depth
1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.
400
65,000
WMC4
7015.00
A4A
WMC4BF
7015.00
A4B
JXD6
(2) #1-500 kcmil
33.00
15.09
15.00
600
65,000
WMC6
10640.00
A4C
WMC6BF
10640.00
A4D
LXD6
(2) #1-500 kcmil
37.00
15.09
15.00
700
65,000
WMC7
13395.00
A5A
WMC7BF
13395.00
A5B
MD6
(3) #1/0-500 kcmil
43.00
20.09
15.00
800
65,000
WMC8
13395.00
A5A
WMC8BF
13395.00
A5B
MD6
(3) #1/0-500 kcmil
43.00
20.09
15.00
1000
65,000
WMC10
18281.00
A6A
WMC10BF
18281.00
A6B
ND6
(4) #2-500 kcmil
50.00
20.09
15.00
1200
65,000
WMC12
26001.00
A6A
WMC12BF
26001.00
A6B
ND6
(4) #2-500 kcmil
50.00
20.09
15.00
1400
65,000
WMC14
35163.00
A7A
WMC14BF
35163.00
A7B
PD6
(5) 300-600 kcmil
62.00
24.88
16.48
1600
65,000
WMC16
35163.00
A7A
WMC16BF
35163.00
A7B
PD6
(5) 300-600 kcmil
62.00
24.88
16.48
3-Phase, 4-Wire SN, Incoming, 240V AC Max.
400
65,000
WMC44
8030.00
A4A
WMC44BF
8030.00
A4B
JXD6
(2) #1-500 kcmil
33.00
15.09
15.00
600
65,000
WMC64
12646.00
A4C
WMC64BF
12646.00
A4D
LXD6
(2) #1-500 kcmil
37.00
15.09
15.00
700
65,000
WMC74
16495.00
A5A
WMC74BF
16495.00
A5B
MD6
(3) #1/0-500 kcmil
43.00
20.09
15.00
800
65,000
WMC84
16495.00
A5A
WMC84BF
16495.00
A5B
MD6
(3) #1/0-500 kcmil
43.00
20.09
15.00
1000
65,000
WMC104
20725.00
A6A
WMC104BF
20725.00
A6B
ND6
(4) #2-500 kcmil
50.00
20.09
15.00
1200
65,000
WMC124
29119.00
A6A
WMC124BF
29119.00
A6B
ND6
(4) #2-500 kcmil
50.00
20.09
15.00
1400
65,000
WMC144햴
43048.00
A7A
WMC144BF햴
43048.00
A7B
PD6
(5) 300-600 kcmil
62.00
24.88
16.48
1600
65,000
WMC164햴
43048.00
A7A
WMC164BF햴
43048.00
A7B
PD6
(5) 300-600 kcmil
62.00
24.88
16.48
Ampere
Rating
Maximum
Interrupt
Rating
Indoor Enclosure
Top
List
Feed
Price $
KO
Fig.
Bottom
Feed
List
Price $
KO
Fig.
Breaker
Type 햹
Line Terminal Lugs
No. & Size Per
Line & Neutral 햳
Height
Width
Depth
2000
65,000
MC20햴
A30A
MC20BF햴
40631.00
A30B
RD6
(5) 300-600 kcmil
62.00
24.88
16.48
햲
40631.00
Dimensions shown are representative of outside box
dimensions and do not include allowances for mounting
bumps, covers, hubs, or hardware protrusions.
햳 Wire range is the maximum allowable.
햴 1200amp maximum feed per side.
햵 Contact sales office for ordering information on 100K
rated units. 10% adder applies.
Discount Schedule RESI
햶
Devices are top or bottom, not combination. Both
constructions use the same enclosure size and knockout
patterns.
햷 Contact sales office for ordering information. Lead time
may apply.
Dimensions (inches)햲
햸
Bus Duct devices and 2000amp device are indoor, type
N1, only.
햹 Breaker types listed are for top feed units. All bottom
feed units use non-interchangeable trip breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-41
METER
CENTERS
햸
▪ Devices equipped for bus duct entry are available , see page 2-82
Meter Centers
Modular Metering: Main Switch Service Entrance Modules
Selection
Features
▪ 400-800Amp Standard Switches (Non-EUSERC) are invertible for top or
bottom feed
▪ 1200Amp device uses a molded case switch (looks like a breaker)
2
▪ All switches are setup for class T fuses
METER
CENTERS
▪ 100,000 AIC Rating
▪ Small Compact Size
▪ Bus Duct entry available for 400-800Amp standard switches, see
page 2-83
400 Ampere Fusible
Switch Module
800 Ampere Fusible Switch &
Pullbox Combination Module
Check local utility requirements prior to installation.
Fusible Switch Modules
Ampere
Rating
Outdoor Enclosure
Maximum
Interrupt Catalog
List
Rating
Number
Price $
Fuse Type 햴
Dimensions (inches) 햲
Service
Feed
Line Terminal Lugs
No. & Size Per
Line & Neutral 햳
Height
Width
Depth
KO Fig.
1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.
200
100,000
WMP02U 햵
1343.00
T
OH
(1) #6-250 kcmil
33.00
12.00
13.00
A3
400
100,000
WMS4U
4086.00
T
OH/UG
(2) #4-500 kcmil
35.50
15.00
16.00
A1A
600
100,000
WMS6U
7762.00
T
OH/UG
(2) #4-500 kcmil
41.50
15.00
16.00
A1B
800
100,000
WMS8U
11895.00
T
OH/UG
(3) #4-500 kcmil
41.50
15.00
16.00
A1C
1200
100,000
WMS12U 햸
25514.00
T
UG
(4) #250-500 kcmil
50.00
20.00
15.00
A1D
3-Phase, 4-Wire SN, Incoming, 240V AC Max.
200
100,000
WMP024U햵
2043.00
T
OH/UG
(1) #6-250 kcmil
33.00
12.00
13.00
A3
400
100,000
WMS44U
4643.00
T
OH/UG
(2) #4-500 kcmil
35.50
15.00
16.00
A1A
600
100,000
WMS64U
9480.00
T
OH/UG
(2) #4-500 kcmil
41.50
15.00
16.00
A1B
800
100,000
WMS84U
17269.00
T
OH/UG
(3) #4-500 kcmil
41.50
15.00
16.00
A1C
1200
100,000
WMS124U 햸
28611.00
T
UG
(4) #250-500 kcmil
50.00
20.00
15.00
A1D
Combination Fusible Switch & Pull Box Modules (Meets EUSERC Requirements)
Ampere
Rating
Outdoor Enclosure
Maximum
Interrupt Catalog
List
Rating
Number
Price $
Fuse Type
Service
Feed
Line Terminal Lugs
No. & Size Per
Line & Neutral
Dimensions (inches)햲
Height
Width
Depth
KO Fig.
1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.
400
100,000
WMS4UPBU
5005.00
T
UG
1 Set of 2 Studs
50.06
25.50
15.00
A2A
600
100,000
WMS6UPBU
9260.00
T
UG
2 Set of 2 Studs
50.06
25.50
15.00
A2A
800
100,000
WMS8UPBU
13374.00
T
UG
3 Set of 2 Studs
50.06
25.50
15.00
A2A
A2A
3-Phase, 4-Wire SN, Incoming, 240V AC Max.
400
100,000
WMS44UPBU
6842.00
T
UG
1 Set of 2 Studs
50.06
25.50
15.00
600
100,000
WMS64UPBU
12161.00
T
UG
2 Set of 2 Studs
50.06
25.50
15.00
A2A
800
100,000
WMS84UPBU
20000.00
T
UG
3 Set of 2 Studs
50.06
25.50
15.00
A2A
햲
Dimensions shown are representative of outside box
dimensions and do not include allowances for mounting
bumps, covers, hubs, or hardware protrusions.
햳 Wire range listed is the maximum allowable.
2-42
햴
Fuses not included.
Fusible pull-out switch.
햷 Lugs not included. NEMA II Stud Pattern lugs must be
installed by user or utility.
햵
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햸
Device uses a molded case switch (looks like a breaker).
Class T fuses must be installed in conjuction with the
molded case switch for proper operation.
Discount Schedule RESI
Meter Centers
Modular Metering: Tap Box and Pullbox Modules
Selection
Features
Tap Boxes
▪ 1200Amp thru bussing included for line side feed or load side tap and
are invertible for top or bottom feed
▪ 100,000 AIC Rating
2
▪ Compact Construction
▪ EUSERC-compliant construction for cable entry and exit (no thru bus
connection)
▪ Can be used with breaker modules (up to 1200amps) for EUSERC
compliance for underground feed or when extra conductor length
needed (aligns with 6" KO on both modules)
Tap Box
Module
Pullbox
Module
▪ 65,000 AIC Rating
Check local utility requirements prior to installation.
Tap Box Modules햴
Ampere
Rating
Outdoor Enclosure
Maximum
Interrupt Catalog
List
Rating
Number
Price $
Service
Feed
Line Terminal Lugs
No. & Size Per
Line & Neutral 햳
Dimensions (inches)햲
Height
Width
Depth
KO Fig.
1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.
800
100,000
WMTB8U
1507.00
OH/UG
(3) 1/0-400 kcmil
39.00
12.00
12.00
A2
1200
100,000
WMTB12U
2274.00
OH/UG
(4) 250-600 kcmil
41.00
15.00
13.00
A8
1600
100,000
WMTB16U
4877.00
OH/UG
(5) 300-600 kcmil
41.75
25.00
14.00
A9
3-Phase, 4-Wire SN, Incoming, 240V AC Max.
800
100,000
WMTB84U
1632.00
OH/UG
(3) 1/0-400 kcmil
39.00
12.00
12.00
A2
1200
100,000
WMTB124U
2538.00
OH/UG
(4) 250-600 kcmil
41.00
15.00
13.00
A8
1600
100,000
WMTB164U
5277.00
OH/UG
(5) 300-600 kcmil
41.75
25.00
14.00
A9
Pullbox Modules (no thru-bus, includes lug landings)
Ampere
Rating
Outdoor Enclosure
Maximum
Interrupt Catalog
List
Rating햵
Number
Price $
Service
Feed
Line Terminal Lugs
No. & Size Per
Line & Neutral
Dimensions (inches)햲
Height
Width
Depth
KO Fig.
1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.
400
65,000
WMMB1400
1382.00
UG
1 Set of 2 Studs
37.50
16.69
9.34
A10A
800
65,000
WMMB1800
1534.00
UG
2 Sets of 2 Studs
45.50
19.44
12.72
A10B
1200
65,000
WMMB11200
3186.00
UG
3 Sets of 2 Studs
47.50
25.94
12.72
A10C
3-Phase, 4-Wire SN, Incoming, 240V AC Max.
400
65,000
WMMB3400
2191.00
UG
1 Set of 2 Studs
37.50
16.69
9.34
A10A
800
65,000
WMMB3800
2763.00
UG
2 Sets of 2 Studs
45.50
25.94
12.72
A10B
1200
65,000
WMMB31200
5749.00
UG
3 Sets of 2 Studs
47.50
33.83
12.72
A10C
햲
Dimensions shown are representative of outside box
dimensions and do not include allowances for mounting
bumps, hubs, or hardware protrusions.
햳 Wire range listed is the maximum allowable.
Discount Schedule RESI
햴
햵
Single bolt joint coupler not included. If used for load
side application an additional coupler must be ordered.
Devices rated for 22,000. 65,000 rating requires cables to
be tied together. Please see instructions with pullbox for
details.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-43
METER
CENTERS
Pullboxes
Meter Centers
Modular Metering: Residential Modules—Ring Style
Selection
Features
METER
CENTERS
2
▪ UL Listed for 60/75° C conductors.
See equipment markings for
applications
▪ 1200 Amp thru bus
▪ Interconnectable with discontinued
“MM” modular metering
▪ Factory phased 3ø units saves on
installation time
▪ 200A units UL Listed for use on
systems capable of delivering up to
100,000 RMS symmetrical amperes
maximum short circuit current
▪ Single bolt joint coupler included.
Order additional couplers as
needed. Use closure plates from
main device to seal openings on
side for thru bus.
WMM4U
Four Socket
Module
WMM6U
Six Socket
Module
Main Breaker Panel
Series Tested Systems — Specify
Siemens Modular Metering
equipment in conjunction with
Ultimate Load Centers.
Check local utility requirements prior to installation.
1-Phase, 3-Wire SN, Incoming & Outgoing, Ring Type Gangable Meter Stack
Continuous
Duty Amps
Per Position
Meter
Positions
Per Stack
Dimensions햲
Catalog
Number
List
Price $
Breaker
Provision
Maximum
AIC햶
Height
Width
Depth
Field Intalled
5th Jaw
Assembly햵
KO Fig.
1-Phase 4-Jaw Sockets, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.
125
200
2
WMM2U
1417.00
65,000
32.41
13.44
7.84
ECMM5J
A12
3
WMM3U
1587.00
65,000
41.41
13.44
7.84
ECMM5J
A12
4
WMM4U
2083.00
QP, QPH,
65,000
50.41
13.44
7.84
ECMM5J
A13
5
WMM5U
2684.00
HQP
65,000
59.41
13.44
7.84
ECMM5J
A14
6
WMM6U
3301.00
2
WMM2200U
3157.00
3
WMM3200U
3379.00
HQPP, HQPPH,
100,000
47.41
17.44
7.84
ECMM5J
A17
4
WMM4200U
4657.00
QP, QPH, HQP 햳
100,000
58.41
17.44
7.84
ECMM5J
A18
QPP, QPPH,
65,000
68.41
13.44
7.84
ECMM5J
A15
100,000
36.41
17.44
7.84
ECMM5J
A16
3-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ring Type Gangable Meter Stacks
Continuous Meter
Duty Amps Positions Catalog
Per Position Per Stack Number
List
Price $
Breaker
Provision
Dimensions햲
Maximum
AIC햶
Height Width Depth
1-Phase 5-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC
125
200
햲
Stack Phasing:
Phases/Socket
KO Fig.
햴
3
WMM34U
1688.00
65,000
41.41
13.44
7.84
Installed
1-AB, 1-BC, 1-CA
A12
4
WMM44ABU
2254.00
65,000
50.41
13.44
7.84
Installed
2-AB, 1-BC, 1-CA
A13
4
WMM44BCU
2254.00
QP, QPH,
65,000
50.41
13.44
7.84
Installed
2-BC, 1-AC, 1-AB
A13
4
WMM44CAU
2254.00
HQP
65,000
50.41
13.44
7.84
Installed
2-AB, 1-BC, 1-CA
A13
5
WMM54ABU
2908.00
65,000
59.41
13.44
7.84
Installed
1-AB, 2-BC, 2-CA
A14
6
WMM64U
3574.00
65,000
68.41
13.44
7.84
Installed
2-AB, 2-BC, 2-CA
A15
2
WMM24AB200U
3208.00
100,000
36.41
17.44
7.84
Installed
1-BC, 1-CA
A16
3
WMM34200U
3574.00
100,000
47.41
17.44
7.84
Installed
1-AB, 1-BC, 1-CA
A17
4
WMM44AB200U
4556.00
QPP, QPPH, 100,000
58.41
17.44
7.84
Installed
2-AB, 1-BC, 1-CA
A18
4
WMM44BC200U
4556.00
HQPP,
100,000
58.41
17.44
7.84
Installed
2-BC, 1-AC, 1-AB
A18
4
WMM44CA200U
4556.00
HQPPH,
100,000
58.41
17.44
7.84
Installed
2-AB, 1-BC, 1-CA
A18
5
WMM54AB200U
5315.00
QP, QPH,
100,000
69.41
17.44
7.84
Installed
2-AC, 2-BC, 1-AB
A19
5
WMM54BC200U
5315.00
HQP 햳
100,000
69.41
17.44
7.84
Installed
2-AC, 2-AB, 1-BC
A19
5
WMM54CA200U
5315.00
100,000
69.41
17.44
7.84
Installed
2-AB, 2-BC, 1-AC
A19
Dimensions shown are representative of outside box
length, width, & depth and do not include allowances
for mounting bumps, endwalls, covers, hubs or
hardware protrusions.
2-44
5th Jaw
Assembly
햳
Order filler plate ECCP3U if using standard 2" wide
circuit breaker (QP).
햴 NOT for use on 3 phase-4 wire delta systems.
햵 Order ECMM5IJ for insulated 5th jaw.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햶
Max. AIC determined by maximum AIC of tenant
breakers. Higher ratings may be achieved thru approved
series rating combinations.
Discount Schedule RESI
Meter Centers
Modular Metering: Residential Modules—Ringless Style
Selection
Features
WMM4200UR
Four Socket
Module
Check local utility requirements prior to installation.
1-Phase, 3-Wire SN, Incoming & Outgoing, Ringless Type Gangable Meter Stacks
125
1200
200
Dimensions
Field Installed
Maximum
5th Jaw
KO
AIC
Height Width Depth Assembly
Fig.
Horn
Bypass
Catalog Number
List
No
Price $
Bypass
List
Price $
2
WMM2UR
1492.00
WMM2URNJ
1540.00
65,000
32.41
13.44
7.84
ECMM5J
A11
3
WMM3UR
1677.00
WMM3URNJ
1739.00
65,000
41.41
13.44
7.84
ECMM5J
A12
4
WMM4UR
2195.00
WMM4URNJ
2330.00
65,000
50.41
13.44
7.84
ECMM5J
A13
5
WMM5UR
2806.00
WMM5URNJ
2935.00
65,000
59.41
13.44
7.84
ECMM5J
A14
6
WMM6UR
3427.00
WMM6URNJ
3744.00
2
WMM2200UR
3208.00
WMM22URNJ
1610.00
3
WMM3200UR
3451.00
WMM32URNJ
3574.00
HQPPH, QP,
100,000
47.41
17.44
7.84
ECMM5J
A17
4
WMM4200UR
4782.00
WMM42URNJ
4878.00
QPH, HQP
100,000
58.41
17.44
7.84
ECMM5J
A18
Thru-Bus Cont.
Meter
Rating
Amps/ Positions
(amps)
Pos
Per Stack
Breaker
Provision
QP, QPH, HQP
QPP, QPPH, HQPP,
65,000
68.41
13.44
7.84
ECMM5J
A15
100,000
36.41
17.44
7.84
ECMM5J
A16
3-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, 5-Jaw Ringless Type
Gangable Meter Stacks
Thru-Bus Cont. Meter
Rating
Amps/ Positions
(amps)
Pos
Per Stack
3
4
125
5
1200
6
Horn
Bypass
200
4
WMM34UR
1761.00 WMM34URNJ
1840.00
2378.00 WMM44ABURNJ
2485.00
Dimensions
Breaker
Maximum
Provision AIC
Height Width Depth
QP,
Stack Phasing
Phases/Sockets
KO
Fig.
65,000
41.41 13.44 7.84
1-AB, 1-BC, 1-AC
A12
65,000
50.41 13.44 7.84
2-AB, 1-BC, 1-AC
A13
A14
WMM44BCUR
2378.00 WMM44BCURNJ
2485.00
QPH,
65,000
50.41 13.44 7.84
1-AB, 2-BC, 1-AC
WMM44CAUR
2378.00 WMM44CAURNJ
2485.00
HQP
65,000
50.41 13.44 7.84
1-AB, 1-BC, 2-AC
A14
WMM54ABUR
3029.00 WMM54ABUR3NJ
3208.00
65,000
59.41 13.44 7.84
1-AB, 2-BC, 2-AC
A14
WMM54BCUR
3029.00 WMM54BCURNJ
3208.00
65,000
59.41 13.44 7.84
2-AB, 1-BC, 2-AC
A15
WMM54CAUR
3029.00 WMM54CAURNJ
3208.00
65,000
59.41 13.44 7.84
2-AB, 2-BC, 1-AC
A15
WMM64UR
3744.00 WMM64URNJ
3774.00
65,000
68.41 13.44 7.84
2-AB, 2-BC, 2-AC
A15
3363.00
100,000 36.41 17.44 7.84
1-BC, 1-AC
A16
—
—
WMM24AB2URNJ
WMM34200UR
3649.00 WMM342URNJ
3720.00
100,000 47.41 17.44 7.84
1-AB, 1-BC, 1-AC
A17
WMM44AB200UR
4657.00 WMM44AB2URNJ
4782.00 QP, QPH,
100,000 58.41 17.44 7.84
2-AB, 1-BC, 1-AC
A18
WMM44BC200UR
4657.00 WMM44BC2URNJ
4782.00 HQP, QPP
100,000 58.41 17.44 7.84
1-AB, 2-BC, 1-AC
A18
WMM44CA200UR
4657.00 WMM44CA2URNJ
4782.00
QPPH,
100,000 58.41 17.44 7.84
1-AB, 1-BC, 2-AC
A18
5399.00
HQPP,
100,000 69.41 17.44 7.84
1-AB, 2-BC, 2-AC
A19
—
5
List
Price $
WMM44ABUR
2
3
Catalog Number
List
No
Price $ Bypass
WMM54AB2URNJ
—
—
WMM54BC2URNJ
5399.00 HQPPH
100,000 69.41 17.44 7.84
2-AB, 1-BC, 2-AC
A19
—
—
WMM54CA2URNJ
5399.00
100,000 69.41 17.44 7.84
2-AB, 2-BC, 1-AC
A19
Dimensions shown are representative of outside box
length, width, & depth and do not include allowances
for mounting bumps, endwalls, covers, hubs or
hardware protrusions.
Discount Schedule RESI
—
Order filler plate ECCP3U if using standard 2" wide
circuit breaker (QP).
NOT for use on 3 phase-4 wire delta systems.
Order ECMMI5J for insulated 5th jaw.
Max. AIC determined by maximum AIC of tenant
breakers. Higher ratings may be achieved thru approved
series rating combinations.
Only “NJ” suffix should be used within the Florida
Meter Group territory.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-45
METER
CENTERS
WMM3UR
Three Socket
Module
▪ Single bolt joint coupler included.
Order additional couplers as needed.
Use closure plates from main device
to seal openings for thru bus on
side.
▪ 200A units UL Listed for use on
systems capable of delivering up to
100,000 RMS symmetrical amperes
maximum short circuit current
Series Tested Systems — Specify
Siemens Modular Metering equipment
in conjunction with EQ® III or Ultimate
Load Centers.
2
▪ UL Listed for 60/75°C conductors.
See equipment markings for
applications
▪ Individual split covers with barrel
lock compatibility
▪ Available with and without factory
installed horn bypass - field install
horn bypass kit available (#ECHBK)
▪ Interconnectable with discontinued
“MM” modular metering
▪ Factory phased 3ø units saves on
installation time
Meter Centers
METER
CENTERS
2
Modular Metering: Commercial Modules—Introduction
General
Commercial metering applications using 240volts, such as shopping centers, office buildings, and small commercial buildings
frequently require different meter sockets from those used in residential applications. In many instances a 3-phase meter socket
and tenant circuit breaker must be used. Siemens is proud to offer a complete line of commercial metering to meet the majority
of the vast array of utility specifications for commercial meter services.
For those utilities requiring a lever bypass Siemens has a complete line of 100-320amp/position lever bypass meter modules
using the high-quality Landis & Gyr HQ lever bypass block. These modules offer several Siemens exclusive features to help
installation.
If a EUSERC-approved commercial service is needed Siemens is now proud to offer our line of test-block bypass (TBB)
commercial meter modules. These devices eliminate the labor intensive bussed gutter solution that was used in the past.
Some utilities require a bolt-in meter for 400amp applications. The bolt-in meter socket (also called K base) was designed and
still originates with Landis & Gyr. Siemens offers the widest array of K base meter modules in the industry. The socket used in
these modules is utility specific so please check for approval prior to installation.
The versatitlity and capability of the Siemens line of commercial meter modules has been designed to fit the majority of
application and utility requirements and can be inter-connected with residential meter modules for maximum versatility.
Lever Bypass
Siemens lever bypass meter modules are designed to stand up to the heavy
demands of commercial services. Siemens features the Landis & Gyr HQ meter
block at each position. Modules are available with 3-phase or single phase thru bus
coupled with 3-phase or single phase tenant circuit breakers. Applications requiring
240/120V AC 3-phase 4-wire Delta should only use those modules with a 3-phase
tenant main provision.
Features include:
▪ 1-4 positions on 100 and 200amp devices
▪ 1-2 positions on 320amp(400amp max) devices
▪ 100,000 AIC on 200amp devices
▪ Factory installed tenant breakers on 320amp devices
▪ 3-Phase 100amp devices- saves on cost of 3-phase tenant mains
▪ 5th jaw included, standard, on all single phase meter modules
▪ 1200amp thru-bus, NEMA 3R outdoor construction
▪ Siemens exclusive floating deadfront on 200amp devices- eliminates the need for
filler plates when using a 100amp breaker in a 200amp provision
▪ Centrally located neutrals and ground lugs by each breaker provision
▪ Factory phased sockets reduces installation time
▪ Horizontal 3-phase breaker mounting- reduces install time and effort
Test Block Bypass
Siemens line of test-block-bypass (TBB) meter modules are designed to provide a
solution for commercial group metering applications in utility service areas that
follow the EUSERC specification. Each position features the same meter block used
on Siemens’ commercial switchboards to maintain high quality standards. Modules
are available with 3-phase or single phase thru bus coupled with 3-phase or single
phase tenant circuit breakers. Applications requiring 240/120V AC 3-phase 4-wire
Delta should only use those modules with a 3-phase tenant main provision.
Features include:
▪ 1-3 positions on 200amp devices
▪ Field conversion from 200amp to 100amp breakers with no additional kits
▪ 225 max tenant breaker capability
▪ Horizontal breaker mounting reduces install time and effort
▪ Centrally located neutral lugs
K Base
Siemens line of modules featuring the Landis & Gyr bolt-in meter socket (K base) is
the most extensive in the industry. These modules are available in 1 position only
and are available with 3-phase or single phase thru bus coupled with 3-phase or
single phase tenant circuit breakers. Applications requiring 240/120V AC 3-phase
4-wire Delta should only use those modules with a 3-phase tenant main provision.
These modules should not be installed until the local utility has given approval.
Features include:
▪ factory installed 400amp Siemens circuit breaker
▪ 400amp continuous/400amp max Landis & Gyr K base meter socket (K7 for three
phase, type K5 for single phase)
2-46
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Commercial Meter Modules: Single Phase Lever Bypass
Selection
Features
High-quality Landis & Gyr HQ lever bypass block
Ground lugs mounted by each position
225amp tenant main provisions
Floating deadfront eliminates need for 100amp conversion kits or filler plates
Centrally located neutral lugs
2
Compact size
METER
CENTERS
▪
▪
▪
▪
▪
▪
▪
100,000 AIC Rating
W1MM4225U
Features
▪
▪
▪
▪
▪
High-quality Landis & Gyr HQ lever bypass block
Factory installed 400amp tenant main breaker
225amp tenant main provisions
One & Two position units now available
42,000 AIC Rating
W1MM2400
1-Phase, 3-Wire SN , Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter Stacks
Thru-Bus Max Tenant
Rating
Breaker
(amps)
(amps)
Meter
Positions
Per Stack
Catalog
Number
List
Price $
Breaker Provision
Dimensions
Width
Depth
Maximum
AIC
Height
Bypass
Type
KO Fig.
100,000
23.75
23.50
9.13
Lever
100,000
36.75
23.50
9.13
Lever
A21
100,000
49.75
23.50
9.13
Lever
A22
1-Phase 4-Jaw Sockets, 1 Phase-3 Wire Thru-Bus 120/240V AC Max. -Lever Bypass
1200
225
1
W1MM1225U
2982.00
2
W1MM2225U
6136.00
3
W1MM3225U
9194.00
QP, QPH HQP, QPP,
QPPH, HQPP,
HQPPH
A20
4
W1MM4225U
12370.00
100,000
62.75
23.50
9.13
Lever
A23
400
1
W1MM1400
8358.00
JXD22B400 Factory inst.
42,000
57.00
26.00
8.66
Lever
A24
400
2
W1MM2400
12720.00
JXD22B400 Factory inst.
42,000
70.38
23.00
9.69
Lever
A26
Dimensions shown are representative of box
dimensions and do not include allowances for
mounting bumps, hubs or hardware protrusions.
Not for use on 3 phase-4 wire delta systems.
Discount Schedule RESI
Max. AIC determined by maximum AIC of tenant
breakers when used in conjunction with a meter socket.
Higher overall ratings may be acheived thru approved
series rating combinations.
Alternate trip amerpages available. To order, add
-amperage after catalog number (350amp becomes
W1MM1400-350). List price remains the same. Contact
sales office for lead time.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-47
Meter Centers
Commercial Meter Modules: 3-Phase Input with 1-Phase Output Lever Bypass
Selection
Features
METER
CENTERS
2
▪
▪
▪
▪
▪
▪
▪
High-quality Landis & Gyr HQ lever bypass block
Ground lugs mounted by each position
225amp tenant main provisions
Floating deadfront eliminates need for 100amp conversion kits or filler plates
Centrally located neutral lugs
Compact size
100,000 AIC Rating
W2MM4AB225U
Features
▪
▪
▪
▪
High-quality Landis & Gyr HQ lever bypass block
Factory installed 400amp tenant main breaker
One & Two position units now available
42,000 AIC Rating
W2MM2400AB
3-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ringless Type Lever Bypass
Gangable Meter Stacks
Thru-Bus Max Tenant
Rating
Breaker
(amps)
(amps)
Meter
Positions Catalog
Per Stack Number
List
Price $
Breaker Provision
Dimensions
Maximum
AIC
Height Width Depth
Bypass
Type
Stack Phasing:
Phases/Socket
KO Fig.
1-Phase 5-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC-Lever Bypass
1200
1
W2MM1225U
3056.00
65,000
23.75 23.50
9.13
Lever
1-AB
A20
2
W2MM2AB225U
6090.00
65,000
36.75 23.50
9.13
Lever
1-AC, 1-BC
A21
2
W2MM2BC225U
6090.00
65,000
36.75 23.50
9.13
Lever
1-AC, 1-AB
A22
2
W2MM2CA225U
6090.00
65,000
36.75 23.50
9.13
Lever
1-AB, 1-BC
A23
3
W2MM3225U
9022.00
4
W2MM4AB225U 12001.00
4
4
400
400
225
QPPH, HQPP,
100,000
49.75 23.50
9.13
Lever
1-AB, 1-BC, 1-CA A20
100,000
62.75 23.50
9.13
Lever
2-AB, 1-BC, 1-CA A21
W2MM4BC225U 12001.00
100,000
62.75 23.50
9.13
Lever
1-AB, 2-BC, 1-CA A22
W2MM4CA225U 12001.00
100,000
62.75 23.50
9.13
Lever
1-AB, 1-BC, 2-CA A23
1
W2MM1400AB
8358.00 JXD22B400 Factory inst.
42,000
57.00 26.00
8.66
Lever
1-AB
A24
2
W2MM2400AB
13992.00 JXD22B400 Factory inst.
42,000
70.38 23.00
9.69
Lever
1-AB, 1-BC
A26
Dimensions shown are representative of box
dimensions and do not include allowances for
mounting bumps, hubs, or hardware protrusions.
Not for use on 3 phase-4 wire delta systems.
Max. AIC determined by maximum AIC of tenant
breakers when used in conjunction with a meter socket.
Higher overall ratings may be acheived thru approved
series rating combinations.
2-48
QP, QPH HQP, QPP,
HQPPH
Alternate trip amerpages available. To order, add
-amperage after catalog number (350amp becomes
W1MM1400-350). List price remains the same. Contact
sales office for lead time.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Modules are factory phased. End user is responsible for
balancing each phase by selecting the correct model
number.
Discount Schedule RESI
Meter Centers
Commercial Meter Modules: Three Phase with Lever Bypass
Selection
Features
▪ High-quality Landis & Gyr HQ lever bypass block
▪ Ground lugs mounted by each position
▪ Centrally located neutral lugs
2
▪ Horizontal breaker mounting reduces install time and effort
W3MM4200U
METER
CENTERS
▪ 100amp modules save on tenant main cost
W3MM3
Features
▪ High-quality Landis & Gyr HQ lever bypass block
▪ 400amp tenant main breaker factory installed
▪ One & Two position units now available
▪ 42,000 AIC Rating
W3MM1400
3-Phase, 4-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter Stacks
Thru-Bus Max Tenant
Rating
Breaker
(amps)
(amps)
Meter
Positions
Per Stack
Catalog
Number
List
Price $
Breaker Provision
Dimensions
Maximum
AIC
Height
Width
Depth
Bypass
Type
KO Fig.
65,000
29.11
20.21
8.93
Lever
65,000
44.70
20.21
8.93
Lever
3-Phase 7-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC Max. -Lever Bypass
100
1
W3MM1
3352.00
2
W3MM2
6555.00
3
W3MM3
9681.00
65,000
61.20
20.21
8.93
Lever
4
W3MM4
12942.00
65,000
77.70
20.21
8.93
Lever
100,000
23.75
23.50
9.13
Lever
100,000
36.75
23.50
9.13
Lever
A21
100,000
49.75
23.50
9.13
Lever
A22
QP, QPH HQP
3-Phase 7-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 240V AC Max. -Lever Bypass
1200
200
1
W3MM1200U
3352.00
2
W3MM2200U
6555.00
3
W3MM3200U
9681.00
QJ, QH2, QJ2-H, HQJ2-H
A20
4
W3MM4200U
12942.00
100,000
62.75
23.50
9.13
Lever
A23
400
1
W3MM1400
8358.00
JXD22B400 Factory inst.
42,000
57.00
26.00
8.56
Lever
A24
400
2
W3MM2400
15370.00
JXD22B400 Factory inst.
42,000
70.38
23.00
9.69
Lever
A26
Dimensions shown are representative of outside box
dimensions and do not include allowances for
mounting bumps, hubs, or hardware protrusions.
Accepts 3-pole 100amp maximum circuit breaker.
Discount Schedule RESI
Max. AIC determined by maximum AIC of tenant
breakers used in conjunction with meter socket. Higher
ratings may be acheived overall thru approved series
rating combinations.
Alternate trip amerpages available. To order, add
-amperage after catalog number (350amp becomes
W3MM1400-350). List price remains the same. 1 high
units only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-49
Meter Centers
Commercial Meter Modules: K Base Bolt-In Meter Modules
Selection
Features
▪ All modules feature the Landis & Gyr K5 (single phase) or K7 (three phase)
Bolt-on Meter Base
METER
CENTERS
2
▪ 22,000 AIC Rating
Note: Users are advised to contact utility PRIOR to installation to verify
approval. User assumes all responsibility for ensuring utility acceptance
prior to installation.
1-Phase, 3-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter Stacks
Thru-Bus Max Tenant Meter
Rating
Breaker
Positions Catalog
List
Maximum Dimensions
(amps)
(amps)
Per Stack Number
Price $
Breaker Provision
AIC
Height Width
1-Phase 5 Terminal Landis & Gyr K5 Bolt-In Socket, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.-No Bypass
Depth
Stack Phasing:
Phases/Socket
KO Fig.
1200
8.66
—
A25
400
1
W1MM1400B
10029.00
JXD22B400 Factory inst.
22,000
47.94
29.83
3-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ringless Type Lever Bypass
Gangable Meter Stacks
Thru-Bus Max Tenant
Rating
Breaker
(amps)
(amps)
Meter
Positions
Per Stack
Catalog
Number
List
Price $
Breaker Provision
Maximum
AIC
Dimensions
Height
Width
Depth
Stack Phasing:
Phases/Socket
KO Fig.
29.83
8.66
1-AB
A25
1-Phase 5 Terminal Landis & Gyr K5 Bolt-In Socket, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.-No Bypass
1200
400
1
W2MM1400BAB
10029.00
JXD22B400 Factory inst.
22,000
47.94
3-Phase, 4-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter Stacks
Thru-Bus Max Tenant Meter
Rating
Breaker
Positions Catalog
List
Maximum Dimensions
(amps)
(amps)
Per Stack Number
Price $
Breaker Provision
AIC
Height Width
3-Phase 7 Terminal Landis & Gyr K7 Bolt-In Socket, 3 Phase-4 Wire Thru-Bus 240V AC Max.-No Bypass
1200
400
1
W3MM1400B
Dimensions shown are representative of outside box
dimensions and do not include allowances for
mounting bumps, hubs, or hardware protrusions.
Not for use on 3 phase-4 wire delta systems.
Maximum AIC determined by maximum AIC of tenant
breakers when used in conjunction with a meter socket.
Higher ratings may be acheived thru approved series
rating combinations.
2-50
10029.00
JXD22B400 Factory inst.
22,000
47.94
29.83
Depth
Stack Phasing:
Phases/Socket
KO Fig.
8.66
—
A25
Alternate trip amerpages available. To order, add
-amperage after catalog number (350amp becomes
W3MM1400-350). List price remains the same. Lead
time applies.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Modular Metering: Commercial Modules—Test Block Bypass
Selection
Features
▪ EUSERC Compliant Test Block Bypass
▪ Ground lugs mounted by each position
▪ 225amp tenant breaker privisions (breakers not included)
2
▪ Single phase modules available with three phase thru bussing
▪ Floating deadfront eliminates need for 100amp conversion kits or filler plates
Thru-Bus Maximum Socket
Meter
Rating
Tenant
Continuous Positions Catalog
(Amps)
Breaker
Duty Amps Per Stack Number
List
Price $
1-Phase, 3-Wire Feed & Tenant Mains 120/240V AC Max.햲
1200
225
200
1
W1MM1225USS
1468.00
1200
225
200
2
W1MM2225USS
2823.00
1200
225
200
3
W1MM3225USS
4215.00
3-Phase, 4-Wire Feed & 1-Phase, 3-Wire Tenant Mains 120Y/208V AC Max.햲
1200
225
200
1
W2MM1225USS
1609.00
1200
225
200
2
W2MM2AB225USS 2964.00
1200
225
200
2
W2MM2BC225USS 2964.00
1200
225
200
2
W2MM2CA225USS 2964.00
1200
225
200
3
W2MM3225USS
4356.00
3-Phase, 4-Wire Feed & Tenant Mains 240V Max.햳
1200
225
200
1
W3MM1225USS
1779.00
1200
225
200
2
W3MM2225USS
3344.00
1200
225
200
3
W3MM3225USS
4949.00
햲
햳
햴
Breaker
Provisions 햴
Max.
AIC
Dimensions (inches) Stack Phasing
Phases/Socket
H
W
D
QP, QPH, HQP,
QPP, QPPH,
HQPP, HQPPH
100,000 26.5
100,000 46.0
100,000 65.5
25.5
25.5
25.5
9.0
9.0
9.0
—
—
—
QP, QPH, HQP,
QPP, QPPH,
HQPP, HQPPH
100,000
100,000
100,000
100,000
100,000
26.5
46.0
46.0
46.0
65.5
25.5
25.5
25.5
25.5
25.5
9.0
9.0
9.0
9.0
9.0
1-AB
1-AC,
1-AC,
1-AB,
1-AB,
QJ, QJH2,
QJ2H, HQJ2H
100,000 26.5
100,000 46.0
100,000 65.5
25.5
25.5
25.5
9.0
9.0
9.0
—
—
—
KO
Fig.
A27
A28
A29
1-BC
1-AB
1-BC
1-BC, 1-AC
A27
A28
A28
A28
A29
A27
A28
A29
Not rated for use with 240/120V Delta systems.
Rated for use with 240/120V Delta systems.
Stacks will accept equivalent Murray circuit breakers.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-51
METER
CENTERS
▪ Horizontal breaker mounting reduces install time and effort
Meter Centers
Modular Metering: Residential Modules햲
Knockout Diagrams
Residential Meter Modules — 125A, 200A - 2 Gang
Wiring Diagrams
Catalog Number 햳
METER
CENTERS
2
WMM2U
WMM2200U
Knockout Diagrams
A11
햲
A16
Catalog Number
Catalog Number
WMM2U
WMM2200U
WMM24AB200U
WMM24BC200U
WMM24CA200U
Diagrams also applicable for suffix R, RC and
RNJ products.
2-52
햳
Diagrams also applicable for 200A product.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Residential Modules
▪ 2-high modules — suffix indicates
phases not used
Wiring Diagrams / Knockout Diagrams
▪ 4-high modules — suffix indicates
phase with two sockets
▪ 5-high modules — suffix indicates
phase with one socket in the module
Wiring Diagrams
Catalog Number
WMM3U
WMM3200U
WMM34U
2
Catalog Number
METER
CENTERS
Knockout Diagrams
A12
A17
Catalog Number
Catalog Number
WMM3U
WMM34U
WMM3200U
WMM34200U
Diagrams
also applicable for suffix R, RC and
RNJ products.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-53
Meter Centers
Modular Metering: Residential Modules햲
▪ 2-high modules — suffix indicates
phases not used
Wiring Diagrams / Knockout Diagrams
▪ 4-high modules — suffix indicates
phase with two sockets
▪ 5-high modules — suffix indicates
phase with one socket in the module
Wiring Diagrams
Catalog Number
Catalog Number
Catalog Number
Catalog Number
WMM44ABU
WMM44BCU
WMM44CAU
METER
CENTERS
2
WMM4U
WMM4200U
A17
Knockout Diagrams
A13
햲
A18
Catalog Number
Catalog Number
WMM4U
WMM44ABU
WMM44BCU
WMM44CAU
WMM4200U
WMM44AB200U
WMM44BC200U
WMM44CA200U
Diagrams also applicable for suffix R, RC and
RNJ products.
2-54
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Residential Modules햲
▪ 2-high modules — suffix indicates
phases not used
Wiring Diagrams / Knockout Diagrams
▪ 4-high modules — suffix indicates
phase with two sockets
▪ 5-high modules — suffix indicates
phase with one socket in the module
Wiring Diagrams
Catalog Number
Catalog Number
Catalog Number
Catalog Number
WMM5U
WMM54ABU
WMM54BCU
WMM54CAU
2
METER
CENTERS
Knockout Diagrams
A19
A14
Catalog Number
WMM54AB200U
WMM54BC200U
WMM54CA200U
Catalog Number
WMM5U
WMM54ABU
WMM54BCU
WMM54CAU
For inches / millimeters conversion, see Application Data
section.
햲
Diagrams also applicable for suffix R, RC and
RNJ products.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-55
Meter Centers
Modular Metering: Residential Modules
Outdoor
Knockout Diagrams
Catalog Number
WMM64U
WMM6U
A15
Catalog Number
WMM6U
WMM64U
For inches / millimeters conversion, see Application Data
section.
2-56
▪ 2-high modules — suffix indicates
phases not used
▪ 4-high modules — suffix indicates
phase with two sockets
▪ 5-high modules — suffix indicates
phase with one socket in the module
Catalog Number
METER
CENTERS
2
3-Phase, 4-Wire, Incoming / 1-Phase,
3-Wire, Outgoing
All 3-phase 4-wire meter modules have
the maximum possible degree of
phase balancing.
Wiring Diagrams
Wiring Diagrams / Knockout Diagrams
Single phase sockets are
factory- connected to different
phases for automatic load balancing.
Do not use single stator network meters.
Note: Diagrams also applicable for suffix R, RC and
RNJ product.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Main Switch Service Entrance Modules
Knockout Diagrams
Installation Dimensions
No knockouts on sides of any modules.
2
METER
CENTERS
A1A
Catalog Number
WMS4U
WMS44U
A1B
Catalog Number
WMS6U
WMS64U
For inches / millimeters conversion, see Application Data
section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-57
Meter Centers
METER
CENTERS
2
Service Entrance Modules - Main Switch
A1C
Catalog Number
WMS8U
WMS84U
T Fuse Provision
A1D
Catalog Number
WMS12U
WMS124U
Molded Case Switch,
ND63S120A
For inches / millimeters conversion, see Application Data
section.
2-58
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Knockout Diagrams
Meter Centers
Modular Metering: Tap Box & Main Switch Modules
A2
Knockout Diagrams
A3
Catalog Number
Catalog Number
WMTB8U
WMTB84U
WMP02U
WMP024U
2
METER
CENTERS
A2A
Catalog Number
WMS4UPBU
WMS44UPBU
WMS6UPBU
WMS64UPBU
WMS8UPBU
WMS84UPBU
For inches / millimeters conversion, see Application Data
section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-59
Meter Centers
Service Entrance Modules - Main Circuit Breaker
METER
CENTERS
2
Knockout Diagrams
A4A
A4B
Catalog Number
Catalog Number
WMC4
WMC44
WMC4BF
WMC44BF
A4C
A4D
Catalog Number
Catalog Number
WMC6
WMC64
WMC6BF
WMC64BF
For inches / millimeters conversion, see Application Data
section.
2-60
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Main Breaker Modules
Knockout Diagrams
A6A
Catalog Number
2
WMC10
WMC12
WMC104
WMC124
METER
CENTERS
A5A
Catalog Number
WMC7
WMC74
WMC8
WMC84
A6B
Catalog Number
WMC10BF
WMC12BF
WMC104BF
WMC124BF
A5B
Catalog Number
WMC7BF
WMC74BF
WMC8BF
WMC84BF
For inches / millimeters conversion, see Application Data
section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-61
Meter Centers
Knockout Diagrams
METER
CENTERS
2
Modular Metering: Main Breaker & Tap Box Modules
A7A
A8
A7B
Catalog Number
Catalog Number
WMC14
WMC144
WMC16
WMC164
WMC14BF
WMC144BF
WMC16BF
WMC164BF
A9
Catalog Number
Catalog Number
WMTB12U
WMTB124U
WMTB16U
WMTB164U
For inches / millimeters conversion, see Application Data
section.
2-62
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Pullbox & Lever Bypass Modules
A10A
A10B
Knockout Diagrams
A10C
Catalog Number
Catalog Number
Catalog Number
WMMB1400
WMMB3400
WMMB1800
WMMB3800
WMMB11200
WMMB31200
2
METER
CENTERS
A30A
A30B
Catalog Number
Catalog Number
MC20
MC20BF
For inches / millimeters conversion, see Application Data
section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-63
Meter Centers
Modular Metering: Lever Bypass Modules
Knockout Diagrams
For Lever Bypass Modules Only
A20
A21
Catalog Number
WXMM1XXXX
WXMM2XXXX
METER
CENTERS
2
Catalog Number
For Lever Bypass Modules Only
A22
A23
Catalog Number
Catalog Number
WXMM3XXXX
WXMM4XXXX
For inches / millimeters conversion, see Application Data
section.
2-64
햲
See table on page 2-49 for 3-Phase 100A stack
dimensions.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Lever Bypass Modules
Wiring Diagrams
Commercial Meter Modules, Specifications
With 5-Jaw, 1-Phase, 3-Wire Outgoing Landis & Gyr Meter Sockets
1-Phase Incoming & Outgoing
3-Phase Incoming & Outgoing
2
Wiring Diagram References
As Shown
All 3 High
Omit Top Meter
All 2 High
Omit Top Two Meters
All 1 High
Omit Top Two and Bottom Meters
METER
CENTERS
Meter Module
Configuration
All 4 High
Catalog Number
Catalog Number
Catalog Number
Catalog Number
W2MM1225U
W2MM2AB225U
W2MM2BC225U
W2MM2CA225U
Catalog Number
Catalog Number
Catalog Number
Catalog Number
W2MM3225U
W2MM4AB225U
W2MM4BC225U
W2MM4CA225U
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-65
Meter Centers
Modular Metering: Lever Bypass Modules
Wiring and Knockout Diagrams
Provision for HV Type Hubs
A24
A25
METER
CENTERS
2
Provision for Type HD Hubs
Catalog Number
Catalog Number
W1MM1400
W2MM1400AB
W3MM1400
W1MM1400B
W2MM1400BAB
W3MM1400B
A26
Catalog Number
WXMM2400
For inches / millimeters conversion, see Application Data section.
2-66
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Test Block Bypass Modules
A27
Wiring and Knockout Diagrams
A29
2
METER
CENTERS
A28
Note: KO diagrams apply to test block bypass modules only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-67
Meter Centers
Commercial Meter Modules
Wiring and Knockout Diagrams
Wiring Diagrams for 400A Plug-in and Bolt-in Socket
EQUIPMENT
GROUND
B N
METER
CENTERS
2
A
A
N
B
C
W1MM1400
A
N
B
C
W2MM1400
W3MM1400
W1MM1225USS
W1MM2225USS
W1MM3225USS
2-68
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Meter Centers
Modular Metering: Test Block Bypass Modules
Wiring and Knockout Diagrams
A
N
B
C
A
N
B
C
2
NEUTRAL
LUGS
EQUIPMENT GROUND
L
I
N
E
L
O
A
D
L
I
N
E
METER
CENTERS
NEUTRAL (POTENTIAL JAW)
L
O
A
D
W2MM1225USS
W2MM2AB225USS
W2MM2BC225USS
W2MM2CA225USS
W2MM3225USS
W3MM1225USS
W3MM2225USS
W3MM3225USS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-69
Meter Centers
Uni-Pak Metering: Technical Information
METER
CENTERS
2
Selection
Four-position All-in-One featuring
angled breaker design.
Four-position lever bypass All-in-One.
General Information
Design/Performance Features
Siemens’ all new Uni-Pak Metering
offers maximum flexibility and ease
of installation to meet the service
requirements of multiple position
metering projects. The outdoor/indoor
devices are available in two through
six gang set-ups which consist of a pull
section with main lugs or stud terminations,
and 4/5 jaw meter sockets with tenant
circuit breaker provisions.
▪ Siemens’ exclusive 200 ampere/position
non-lever bypass units feature angled
breaker for faster & easier installations
▪ New Siemens’ exclusive floating
deadfront on 200 ampere devices
eliminates need to line up breakers
& covers
▪ UL Listed for Service Equipment
▪ UL Listed for use with 60/75°C wire
▪ UL Listed for short circuit ratings up
to 100,000 RMS symmetrical amps
at 240V AC
▪ Outdoor/indoor construction
▪ Overhead or underground service; load
top, bottom or back
▪ Front accessible 4 or 5-jaw sockets
with individual ring or ringless type
meter covers
▪ 125 amp sockets feed plug-in tenant
breakers through 125 amperes
▪ 200 amp sockets feed plug-in tenant
breakers through 200 amps
▪ All unmetered bus is barriered and
sealable to prevent unauthorized
access
▪ Compact wall-hung design for ease
of handling and installation
▪ Fifth jaw field installable at 3 or 9
o’clock
▪ NEW Lever Bypass now available
The units operate on 120/240V AC 1ø3W systems and are available with
either 125 or 200 ampere meter sockets
to meet a wide variety of small
apartment and commercial building
applications. A fifth jaw accessory kit is
available for use on 120/208YV AC 1ø3W network systems.
The attractive Uni-Pak devices accept
overhead or underground service
terminations and are designed for wallhung surface or semi-flush mounting.
The devices are factory pre-bussed in a
compact enclosure to ensure ease of
handling and installation and to maximize
wall-space efficiency.
In addition to local code and National
Electrical Code requirements, the
serving utility may have special
requirements for metering devices.
Confirm utility acceptance prior to
order placement.
Three meter position All-In-One.
▪ Electrodeposited paint provides
uniform coverage for long-lasting
protection and sharp appearance
▪ Meets EUSERC specifications when
NEMA stud kit and flange kit
(if required) are field-added (not
available for lever bypass versions)
Technical Information
Uni-Pak devices are UL listed under file
#E27100 as service entrance equipment.
Complete Selection
Number of
Meter Jaws
Voltage
Amperes (per
Meter position)
Amperes (Bus)
Tenant Main
Breakers
Number of
Meter Positions
Service
4 or 5
240V AC Maximum
125 amp or 200 amp
Maximum
800 amps Maximum
Provisions for plug-in tenant
circuit breakers through 200A
2, 3, 4, 5 or 6
Overhead or underground
with load top, bottom or back
Industry Specifications
All-In-One residential group metering
units comply with the following industry
standards.
ANSI — Standard #C 12.7-1987
NEMA — Standard #250-1985
UL
— File #E27100
UL
— Standard #50, 67, 414
Catalog Number Logic
SP6511RJL
Siemens Uni-Pak Metering
8
6
5
4
3
2
0
2-70
=
=
=
=
=
=
=
Bus Rating
800 Amp
600 Amp
500 Amp
400 Amp
300 Amp
200 Amp
no bussing
# of Positions
6 = 6 position
5 = 5 position
4 = 4 position
3 = 3 position
2 = 2 position
Phase
1 = 1-Phase
SKT Rating
1 = 125 Amp max
2 = 200 Amp max
Cover Type
blank = ring type
R = ringless
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
# of Jaws
blank = 4-Jaw
J = 5-Jaw
Bypass Type
blank = no bypass
B = horn bypass
L = lever bypass
Meter Centers
Uni-Pak Metering: Selection-Ring Style
Selection
Floating
deadfront!
eliminates
need for
cover
alignment
Smaller, more
compact design!
enclosures are
lighter and use
less wall space
Angled
circuit
breaker for
ease of
installation!
▪
▪
▪
▪
▪
Stud Kits for line
compression lugs
available
Centrally
located
neutral
minimizes
neutral
conductor
length
More secure
design!
greater utility
acceptance
▪ Barriered, sealable
compartment for
unmetered current-carrying
parts
▪ Al/Cu lay-in lugs, except
two socket units
▪ Top or bottom feed
▪ Bottom and rear branch
wiring exits (Neutral and
ground at bottom only)
▪ ANSI #61 light gray
electrodeposited paint on
zinc-coated G90 steel
▪ Meets EUSERC
specifications when NEMA
stud kit and flushing ring (if
required) is field added
Back and
Bottom Exit
for load
conductors
Meets EUSERC
requirements when
stud kit is installed
Single-piece
tenant cover!
easy installation
SP6512
1-Phase, 3-Wire SN, Ring Type, Uni-Pak Meter Center
Continuous
Meter
Duty Amps Bus
Positions Catalog Breaker
Maximum
Per Position Amperage Per Pak Number Provision AIC
Dimensions 햲
Height Width Depth
5th Jaw
Assembly
Line Lugs
Wire Range
List Price $
1-Phase, 4-Jaw Sockets, 120/240V AC Max.
125
200
200
300
400
2
3
4
SP2211
SP3311
SP4411
400
400
500
600
600
400
400
400
600
600
600
800
5
6
4
5
6
2
3
4
4
5
6
6
SP4511
SP4611
SP5411
SP6511
SP6611
SP4212
SP4312
SP4412
SP6412
SP6512
SP6612
SP8612 햳
QP
QPH
HQP
QP
QPH
HQP
QPP
QPPH
HQPP
HQPPH
65,000
65,000
65,000
37.63
38.40
47.40
13.67
25.50
25.50
6.00
7.50
7.50
ECMM5J
ECMM5J
ECMM5J
#6-300 kcmil
#6-300 kcmil
1/0-750 MCM CU-AL
1242.00
1494.00
2122.00
65,000
65,000
65,000
65,000
65,000
100,000
100,000
100,000
100,000
100,000
100,000
100,000
38.40
38.40
47.40
38.40
38.40
31.50
38.44
47.44
47.44
38.44
38.44
38.44
39.20
39.20
31.50
45.20
45.20
29.50
29.50
29.50
35.50
53.10
53.10
53.10
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
ECMM5J
or (2) 1/0-250 AL
or (2) 1/0-3/0 CU
2686.00
3113.00
2636.00
(2) #2-600 kcmil
3038.00
3640.00
1749.00
2587.00
3392.00
3740.00
1/0-750 MCM CU-AL
or (2) 1/0-250 AL
or (2) 1/0-3/0 CU
(2) #2-600 kcmil
Flushing Rail Kits:
4371.00
5127.00
5625.00
Description
List Price $
125 Amps per position
SP221FK
SP331FK
SP441FK
SP4561FK
SP6561FK
2 Gang 200 amp bus
3 Gang 300 amp bus
4 Gang 400 amp bus
5&6 Gang 400 amp bus
5&6 Gang 600 amp bus
124.00
145.00
145.00
145.00
145.00
200 Amps per position
햲
Dimensions shown are representative of outside box
length, width, & depth and do not include allowances for
mounting bumps, endwalls, covers, hubs or hardware
protrusions.
햳 Order NSK600 and PLK600 kits for use with SP8612. CU
Cable only approved with 800A device.
Discount Schedule RESI
SP422FK
SP432FK
SP442FK
SP642FK
SP6562FK
2 Gang 400 amp bus
3 Gang 400 amp bus
4 Gang 400 amp bus
4 Gang 600 amp bus
5&6 Gang 600 amp bus
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
145.00
145.00
145.00
145.00
145.00
2-71
METER
CENTERS
Double barrel
connectors
available for
parallel feed.
▪
▪
Individual split covers
UL Listed for 60 / 75°C
conductors. See equipment
markings for applications
For small apartment
buildings, small professional
and commercial buildings
Completely self-contained
meter centers
Two to six 125A and 200A
sockets breaker positions
Outdoor surface mounted
enclosures
Compact, pre-bussed, easy
to handle, hang and wire
2
Dead front
knockouts makes
200amp to
100amp
conversions
easy
Features
Meter Centers
Uni-Pak Metering: Selection-Ringless Style햴
Floating
deadfront!
eliminates
need for
cover
alignment
METER
CENTERS
2
Smaller, more
compact design!
enclosures are
lighter and use
less wall space
Selection
Features
▪
▪
▪
Factory options!
5th jaw and horn
bypass
Dead front
knockouts makes
200amp to
100amp
conversions
easy
Double barrel
connectors
available for
parallel feed.
Angled
circuit
breaker for
ease of
installation!
▪
▪
▪
▪
Stud Kits for line
compression lugs
available
Centrally
located
neutral
minimizes
neutral
conductor
length
More secure
design!
greater utility
acceptance
Ringless meter construction
Individual split covers with
barrel lock compatibility
Available with horn bypass
factory installed
UL Listed for 60/75° C
conductors See equipment
markings for applications
For small apartment
buildings, small professional
and commercial buildings
Completely self-contained
meter centers
Two to six 125A and 200A
sockets breaker positions
▪ Compact, pre-bussed, easy
to handle, hang and wire
▪ Barriered, sealable
compartment for
unmetered current-carrying
parts
▪ AI/Cu lay-in lugs, except
two socket units
▪ Top or bottom feed
▪ Bottom and rear branch
wiring exits (Neutral and
ground at bottom only)
▪ ANSI #61 light grey
electrodeposited paint on
zinc-coated steel
▪ 5th jaw kit included with
each unit
Back and
Bottom Exit
for load
conductors
Single-piece
tenant cover!
easy installation
SP3311RJ
1-Phase, 3-Wire SN, Ringless Type, Uni-Pak Meter Center - No Bypass & Horn Bypass
Continuous
Meter
Duty Amps Bus
Positions Catalog
Per Position Amperage Per Pak Number
햲
Breaker Maximum Dimensions
Provision AIC
Height Width Depth
Horn
Bypass
Kit
5th Jaw
Assembly 햳
Line Lugs
Wire Range
List Price $
1-Phase, 5-Jaw Sockets, 120/240V AC Max.
125
200
햲
200
200
300
300
400
400
400
400
400
400
600
600
600
600
400
400
400
400
400
400
600
600
600
600
800
2
2
3
3
4
4
5
5
6
6
5
5
6
6
2
2
3
3
4
4
5
5
6
6
6
SP2211RJ
SP2211RJB
SP3311RJ
SP3311RJB
SP4411RJ
SP4411RJB
SP4511RJ
SP4511RJB
SP4611RJ
SP4611RJB
SP6511RJ
SP6511RJB
SP6611RJ
SP6611RJB
SP4212RJ
SP4212RJB
SP4312RJ
SP4312RJB
SP4412RJ
SP4412RJB
SP6512RJ
SP6512RJB
SP6612RJ
SP6612RJB
SP8612RJ햴
65,000
65,000
65,000
MP2211RJ 65,000
65,000
65,000
QP
65,000
QPH
65,000
HQP
65,000
65,000
65,000
65,000
65,000
65,000
100,000
100,000
QP
100,000
QPH
100,000
HQP
100,000
QPP
100,000
QPPH
100,000
HQPP
100,000
HQPPH
100,000
100,000
100,000
Dimensions shown are representative of outside box
length, width, & depth and do not include allowances for
mounting bumps, endwalls, covers, hubs or hardware
protrusions.
2-72
햳
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
37.50
31.50
31.50
38.44
38.44
47.44
47.44
38.44
38.44
38.44
38.44
38.44
13.50
13.50
25.50
25.50
25.50
25.50
39.20
39.20
39.20
39.20
45.20
45.20
45.20
45.20
29.50
29.50
29.50
29.50
29.50
29.50
53.10
53.10
53.10
53.10
53.10
6.00
6.00
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Included
Order ECMMI5J for insulated 5th jaw. Fifth terminal for
RJ devices is included, but not installed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
Installed
ECHBK
햴
#6-300 kcmil
#6-300 kcmil
#2-600 kcmil
#2-600 kcmil
1/0-750 MCM CU-AL
or (2) 1/0-250 AL
or (2) 1/0-3/0 CU
(2) #2-600 kcmil
1/0-750 MCM CU-AL
or (2) 1/0-250 AL
or (2) 1/0-3/0 CU
(2) #2-600 kcmil
1342.00
1341.00
1673.00
1597.00
2348.00
2348.00
2938.00
2938.00
3442.00
3292.00
3340.00
3340.00
3947.00
3793.00
1875.00
1822.00
2763.00
2686.00
3589.00
3467.00
4497.00
4371.00
5300.00
5125.00
5625.00
Order NSK600 and PLK600 kits for use with SP8612RJ.
CU Cable only approved with 800A device.
Discount Schedule RESI
Meter Centers
Uni-Pak Metering: Ringless Style with Lever Bypass
Selection
Factory installed
5th jaw
Dual hub provisions
up to 4"
Siemens exclusive
floating deadfront
High quality
Landis & Gyr
HQ Lever Bypass
3/8" studs on line
connectionsҀ
choose 1, 2, 3
conductor lug kits
Centrally located
neutrals
Side mounted
handles for
easy lifting
225 amp tenant
breakers
Insulating barrier
provides
additional safety
100K AIC rated
Rated for Siemens
or Murray breakers
Note: KO diagrams located on page 2-80.
Inline column
construction for
2Ҁ4 position.
5Ҁ6 position
available.
Mounting rail
included for
easy installation
Barrel lock provisions for greater utility acceptance
Continuous Maximum
Meter
Duty Amps Tenant
Bus
Positions Catalog 햴
Per Position Breaker
Amperage Per Pak Number
List
Price $
Breaker
Provision
Maximum Dimensions (inches) 햲
AIC
Height Width Depth
5th Jaw
@ 9:00
Line
Lugs
햳
1-Phase 5-Jaw sockets, 120/240V AC Max.
400
200
225
600
햲
2
SP4212RJL
3074.00
QP, QPH, HQP,
100,000
36.75
35.90
9.00
Installed
3/8"
3
SP4312RJL
4611.00
QPP, QPPH,
100,000
49.75
35.90
9.00
Installed
Stud
4
SP4412RJL
6148.00
HQPP, HQPPH
100,000
62.75
35.90
9.00
Installed
Field
5
SP6512RJL
7685.00
100,000
49.75
57.68
9.00
Installed
Installed
6
SP6612RJL
9063.00
100,000
49.75
57.68
9.00
Installed
Lugs
Dimensions shown are representative of outside box
length,width, and depth and do not include
allowances for mounting bumps, endwalls, covers,
hubs, or hardware protrusions.
햳
Line lugs are not included. Please order lugs from
chart below.
햴 A barrel lock provision is included with each metered
position.
Hub Kits
Lug Kits
Lug
Catalog
Number
H56476
Wire
Range
3/0-800/94 kcmil
H60162
(2) 1/0-250 kcmil OR
List
Price $
44.00
44.00
(1) #4-600 kcmil
H68752-1
(3) #6-250 kcmil
74.00
H56732-2
(2) #4-350 kcmil
35.00
H56732-M
(2) #4-500 kcmil
56.00
Size
(inches)
Catalog
Number
List
Price $
2
EC56854
178.92
2.5
EC56855
178.92
3
EC56856
178.92
3.5
EC56857
263.06
4
EC56858
119.28
Closure
Plate
EC56933S
76.68
Note: Lug kits should be chosen based on the
wire size being run to the unit. Wire should be
sized according to the National Electrical Code.
A total of 3 lugs are required to wire the line side
of the device.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-73
METER
CENTERS
Independent
ground lugs
2
Generous wiring
spaceҀeasy access
connections
The newly designed line of PAK metering
from Siemens is now available for those
utilities that require a lever bypass for
residential & commercial applications. PAK
Metering provides an all-in-one solution for
applications needing from 2 – 6 meter
positions. The products are designed for easy
installation and include features not found on
competitors, including:
▪ Side mounted handles to help in lifting
▪ “Floating” deadfront to help breaker
alignment
▪ Provisions for one, two, or three incoming
conductors per phase and neutral
▪ Hanging bracket to suspend the unit during
installation
▪ 225 amp branch tenant provisions @
100,000 AIC
▪ Full line of 2– 6 position devices
▪ “In-line” (column) construction for 2 – 4
position devices
Siemens PAK metering has passed rigorous
testing and has been accepted by many of
those utilities that require a lever bypass.
Meter Centers
Uni-Pak Metering: Accessories
METER
CENTERS
2
Selection
ECHS125
NSK400
SUK350TA
Accessories for All-In-One Units
Catalog
Number
Description
List Price $
5th Jaw Kit 햲
ECMM5J
ECMMI5J
23.50
20.50
Bypass Kits햲
Horn Bypass Kit
ECHBK
149.00
Ring Style햲
Ringless Style
ECPP
ECP3
19.00
19.00
Sealing Rings
Snap-On Type Aluminum
Screw Type Stainless Steel햴
SRSS
SRSW
19.38
25.03
Filler Plates
1" Filler Plate
4" to 2" Filler Plate
ECQF3
ECCP3U햲
14.20
14.20
SUK350TA
SUK600TA
54.00
49.00
(2) #500-1000 kcmil
SUK1000TA
64.00
Alternate Lug Kits햲
PLK400
PLK600
183.00
183.00
2" Conduit Hub햵
21⁄2" Conduit Hub햵
EC56854
EC56855
178.92
178.92
3" Conduit Hub
EC56856
178.92
31⁄2" Conduit Hub
EC56857
263.06
4" Conduit Hub
EC56858
119.28
Closure Plate
EC56933S
Type “HD” Conduit Hubs
400 Amp Bus NEMA Stud Kit
600 Amp Bus NEMA Stud Kit 햳
NSK400
NSK600
Not for use on lever bypass units.
Order NSK600 and PLK600 kits for use with 800 Amp
PAK. CU Cable only approved with 800A device.
2-74
157.00
207.00
햴
햵
76.68
Type “RX” Conduit Hubs
⁄4" Conduit Hub
1" Conduit Hub
11⁄4" Conduit Hub
11⁄2" Conduit Hub
2" Conduit Hub
21⁄2" Conduit Hub
Closure Plate
Adapter plate for HD/RX햴
3
NEMA Stud Kits (Meets EUSERC Requirements)햲
햳
List Price $
(2) #6-350 kcmil
(1) #2-600 kcmil
400 Amp Bus Lug Kit (2) #4-250
600 Amp Bus Lug Kit (3) #6-250
Cover Plate
햲
Catalog
Number
Lugs for NEMA Stud Kits햲
Grounded
Insulated
All Types
Description
EC38594
EC38596
EC38597
EC38598
EC38599
EC38600
EC38595
EC9747-1113
022.90
37.81
37.81
23.96
23.96
107.57
38.34
27.00
Use Adapter plate with RX hubs for PAK units.
These items made of Adapter plate and equivalent RX
hub.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Uni-Pak Metering
Wiring Diagrams
NAB
AB
2
METER
CENTERS
AB
Equip. Grd.
N
2 position 200 Amp
2 position 125 Amp
AB
AB
NAB
NAB
AB
AB
AB
AB
AB
Equip. Grd.
Equip. Grd.
N
3 position 125 & 200 Amp
4 position 125 & 200 Amp
AB
NAB
AB
AB
AB
AB
AB
AB
AB
Equip. Grd.
N
NAB
AB
AB
Equip. Grd.
N
5 position 125 & 200 Amp
AB
N
N
6 position 125 & 200 Amp
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-75
Meter Centers
Uni-Pak Metering
METER
CENTERS
2
Wiring, Dimensional & Knockout Diagrams
4 9⁄64"
16 15/16
5 5/8
2 13⁄16"
6
2 13/16
(1) Removable
Hub Plate
Covering HD
Type Hub
Opening ( Max.
4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
13 1⁄2"
8 13⁄32"
5 3⁄32"
25 1/2
4 ⁄
1 8"
9"
9
37 1⁄2"
38 7/16
9
(2) K.O.'s for 0.50"
0.75", 1", 1.25", 1.5"
2", 2.5" Conduit
18 1⁄2"
21 1/2
17 3/4
11 1⁄4"
12 13/16
14
3 3⁄4"
8 5⁄8"
5
2 3⁄4"
2 1/4
2 17⁄32"
(1) K.O.'s for 1",
1.25", 1.5", 2",
2.5", 3" Conduit
5 3⁄4"
3 7⁄16"
6 ⁄
1 23⁄32"
3 4"
(2) K.O.'s for
0.50" Conduit
2 3⁄8"
(2) 0.312" DIA K.O.'s
(1) K.O. for 0.50", 0.75",
1", 1.25", 1.5" Conduit
(2) K.O.'s for 0.50",
0.75", 1", 1.25", 1.5",
2" Conduit
3⁄4"
7 1/2
11/16
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
5 1/2
3 3/16TYP
(2).312"DiaK.O.'s
13 13/16
17 3/32
SP2211X
SP3311X
2-76
5 1/8
2 3/8
1 13/16
2 7/8
1 ⁄
1 13⁄16"
3 21⁄32"
23 3/4
6 7/16
1 16"
1 9⁄16"
10 7⁄32"
4 1⁄16"
1 1⁄2" 1 11⁄16"
(1) K.O. for .5",
.75", 1" Conduit
(6) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(6) K.O. for .50", .75'",
6 19/32
1", 1.25", 1.5", 2", 2.5",
3" Conduit
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3 13/32
Meter Centers
Uni-Pak Metering
Wiring, Dimensional & Knockout Diagrams
20 15/16
5 5/8
20 15/16
5 5/8
2 13/16
2 13/16
2
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
29 1/2
29 1/2
METER
CENTERS
9
9
31 1/2
38 7/16
9
21 1/2
17 3/4
21 1/2
12 3/4
14
17 3/4
12 3/4
14
5 19/32
2 15/32
(1) K.O. for .5",
.75", 1" Conduit
7 1/2
5 19/32
2 15/32
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
27 3/4
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for .5",
.75", 1" Conduit
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
27 3/4
7 1/2
6 7/16
5 3/16
11/16
2 7/8
3 3/16TYP
(2) .312" Dia K.O.'s
5 1/2
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
6 7/16
2 1/16
17 13/16
21 3/32
2 7/8
4 3/4
2 1/16
3 3/16TYP
(2) .312" Dia K.O.'s
5 1/2
2", 2.5", 3", 3.5", 4' KO's with
provisions (Max. 4" Conduit)
2 7/8
4 3/4
17 13/16
21 3/32
SP4312R/RJ/RJB
SP4212R/RJ/RJB
20 15/16
5 5/8
16 15/16
5 5/8
5 3/16
11/16
2 7/8
2 13/16
2 13/16
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
29 1/2
25 1/2
9
9
9
9
47 7/16
47 7/16
30 1/2
9
26 3/4
9
30 1/2
23
26 3/4
23
12 3/4
12 3/4
5
(1) K.O. for .5",
.75", 1" Conduit
7 1/2
23 3/4
2 1/4
(6) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(6) K.O. for .50", .75'",
6 19/32
1", 1.25", 1.5", 2", 2.5",
3" Conduit
6 7/16
2 7/8
5 1/8
2 3/8
1 13/16
11/16
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
5 1/2
3 3/16TYP
(2).312"DiaK.O.'s
13 13/16
17 3/32
SP4411X
5 19/32
2 15/32
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for .5",
.75", 1" Conduit
(5) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
27 3/4
7 1/2
6 7/16
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
5 3/16
11/16
2 7/8
3 13/32
5 1/2
2 1/16
3 3/16TYP
(2) .312" Dia K.O.'s
2 7/8
4 3/4
17 13/16
21 3/32
SP4412R/RJ/RJB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-77
Meter Centers
Uni-Pak Metering
Wiring, Dimensional & Knockout Diagrams
2 13/16
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
2
16 3/4
5 5/8
16 15/16
5 5/8
2 13/16
39 3/16
METER
CENTERS
39 3/16
9
9
38 7/16
38 7/16
9
17 3/4
9
17 3/4
21 1/2
12 3/4
14
(1) K.O. for .5",
.75", 1" Conduit
5
2 1/4
(12) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(12) K.O. for .50", .75'",
6 19/32
1", 1.25", 1.5", 2", 2.5",
3" Conduit
23 3/4
6 19/32
5 1/8
3 3/16TYP 2 7/8
3 13/32
3 3/16TYP
(2).312"DiaK.O.'s
13 13/16
17 3/32
5 1/2
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
23 3/4
6 7/16
7 1/2
5 1/8
2 3/8
1 13/16
11/16
1 13/16
1 13/16
3 13/32
3 3/16TYP 2 7/8
3 13/32
3 3/16TYP
(2).312"DiaK.O.'s
13 13/16
17 3/32
5 1/2
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
SP4511X
5 5/8
5
2 1/4
(12) K.O. for .50", .75'",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(12) K.O. for .50", .75'",
6 19/32
1", 1.25", 1.5", 2", 2.5",
3" Conduit
2 3/8
11/16
1 13/16
12 3/4
6 19/32
6 7/16
7 1/2
21 1/2
14
3 13/32
SP4611X
23 3/4
5 5/8
19 15/16
2 13/16
2 13/16
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
31 1/2
351/2
9
9
9
47 7/16
9
47 7/16
9
9
12 3/4
12 3/4
5 19/32
5
2 15/32
2 1/4
(6) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for
.5" Conduit
23 9/16
22 23/32
(2) .312" Dia K.O.'s
(6) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
6 19/32
(1) K.O. for
.5" Conduit
(2) .312" Dia K.O.'s
27 1/4
26 3/8
(5) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
7 1/2
7 1/2
3 3/4
5 1/8
2 7/8
1 5/16
2 3/4
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
2 3/8
11/16
(1) K.O. for .5",
3 3/16TYP
.75", 1", 1.25" Conduit
1 13/16
3 13/32
2 7/8
2 3/4
1 5/16
22 29/32
7 13/16
19
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5 3/16
3 3/4
2 1/16
11/16
(1) K.O. for .5",
.75", 1", 1.25" Conduit 3 3/4TYP
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
SP5411X
2-78
(5) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
7 13/16
26 19/32
22 21/32
SP6412R/RJ/RJB
2 7/8
4 3/4
Meter Centers
Uni-Pak Metering
Wiring, Dimensional & Knockout Diagrams
19 15/16
5 5/8
23 23/32
5 5/8
2 13/16
2 13/16
2
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
53 1/8
45 3/16
METER
CENTERS
9
9
38 7/16
38 7/16
9
9
12 3/4
12 3/4
5 19/32
2 15/32
5
2 1/4
(12) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for
.5" Conduit
(2) .312" Dia K.O.'s
23 9/16
22 23/32
(1) K.O. for
.5" Conduit
(2) .312" Dia K.O.'s
(12) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
6 19/32
5 1/8
3 3/4
2 7/8
1 13/16
1 5/16
3 3/16TYP
3 13/32
7 13/16
2 3/4
(10) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
4 3/4
3 13/32
7 13/16
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
2 1/16
2 7/8
11/16
3 3/4TYP
1 13/16
5 3/16
3
1 5/16 2 /4
2 7/8
2 7/8
2 3/8
11/16
(1) K.O. for .5",
3 3/16TYP
.75", 1", 1.25" Conduit
22 29/32
19
27 1/4
26 13/32
7 1/2
3 3/4
7 1/2
(10) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
SP6511X
(1) K.O. for .5",
3 3/4TYP
.75", 1", 1.25" Conduit
26 19/32
22 11/16
4 3/4
SP6512R/RJ/RJB
19 15/16
5 5/8
23 23/32
5 5/8
2 13/16
2 13/16
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
(2) Removable HUB plate
covering HD Type Hub
opening (Max. 4" Conduit)
53 1/8
45 3/16
9
9
38 7/16
38 7/16
9
9
12 3/4
12 3/4
5 19/32
2 15/32
5
2 1/4
(12) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for
.5" Conduit
(2) .312" Dia K.O.'s
23 9/16
22 23/32
6 19/32
(12) K.O. for .50", .75",
1", 1.25", 1.5", 2", 2.5",
3" Conduit
(1) K.O. for
.5" Conduit
(2) .312" Dia K.O.'s
5 1/8
3 3/4
2 7/8
1 13/16
1 5/16
3 3/16TYP
3 13/32
7 13/16
2 3/4
(1) K.O. for .5",
3 3/16TYP
.75", 1", 1.25" Conduit
22 29/32
19
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
SP6611X
2 3/8
11/16
1 13/16
3 13/32
27 1/4
26 13/32
(10) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
7 1/2
3 3/4
7 1/2
(10) K.O. for 1",
1.25", 1.5", 2", 2.5",
3" Conduit
3 3/4TYP
4 3/4
2", 2.5", 3", 3.5", 4" KO's with
provisions (Max. 4" Conduit)
5 3/16
1 5/16 2 3/4
2 7/8
2 7/8
7 13/16
11/16
(1) K.O. for .5",
3 3/4TYP
.75", 1", 1.25" Conduit
26 19/32
22 11/16
2 1/16
2 7/8
4 3/4
SP6612R/RJ/RJB
SP8612R/RJ/RJB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-79
Meter Centers
Uni-Pak Metering: Lever Bypass
METER
CENTERS
2
Wiring, Dimensional & Knockout Diagrams
Note:
2, 3, 4 gang
models are
the same
dimensions
on the top
and bottom.
SP4212RJL
SP4312RJL
Note:
5 & 6 gang
models use
the same
dimensions.
SP6512RJL
2-80
SP4412RJL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
SP6612RJL
Meter Centers
Accessories: Modular & PAK Metering
Description
List
Price $
SBJ1
SBJ4
364.00
401.00
BE1
1470.00
BE4
1586.00
873.00
WMEX4U
1088.00
WMMBK
216.00
WMEP
ECHR075
ECHR100
ECHR125
ECHR150
ECHR200
ECHV200
ECHV250
ECHV300
ECHV350
ECHV400
42.50
40.00
39.50
39.50
40.00
70.00
91.00
125.00
182.00
274.00
362.00
EC56854
EC56855
EC56856
EC56857
EC56858
EC56933S
NSK400
NSK600
PLK400
PLK600
178.92
178.92
178.92
263.06
119.28
76.68
157.00
207.00
183.00
183.00
Bussed Elbow permits the
continuation of the main bus
around corners to adjacent wall.
Indoor use only.
Bussed Corner Elbow
SBJ1
use on 125 & 200Amp sockets only.
One pass thru bushing supplied with each WMMB device
When adding modular metering modules to old
installation, replace metal end closure plate with plastic
end closure plate.
Item is a kit consisting of adapter plate & RX type hub.
Bussed Spacer
SBJ4
Catalog
Number
Universal PAK & MOD Access.
Sealing Ring- Snap-on, Stainless Steel
Sealing Ring- Screw-type, Stainless Steel
Sealing Ring- Snap-on, Aluminum
2-pole Bank Filler Plate
QP 125A Max Breaker
4-pole Blank Filler Plate
QPP 225A Max Breaker
4-pole Blank Filler Plate
With QP (2" wide) 125A breaker installed
Plastic Cover Plate- for ring style socket
Plastic Cover Plate- for ringless style socket
Meter By-pass Jumper 4&5 Jaw
5th Jaw Kit for Modular Metering 3, 6, 9 O’clock Positions
Ins. 5th Jaw Kit for Modular Metering 3, 6, 9 O’clock Positions
WMEX1U Spacer
Included with each meter stack. Not included with mains or
tap boxes - order separately if using a switch, breaker, or tap
box module on the load side.
Description
For
METER
CENTERS
WMEX1U
2
Modular Metering Accessories
Single Bolt Joint, 1-Phase, 3-Wire, 1200A maximum
Single Bolt Joint, 3-Phase, 4-Wire, 1200A maximum
Indoor Bussed Elbow, 1-Phase, 3-Wire,
1200A maximum
Indoor Bussed Elbow, 3-Phase, 4-Wire,
1200A maximum
Outdoor Bussed Extension, 1-Phase, 3-Wire,
1200A maximum
Outdoor Bussed Extension, 3-Phase, 4-Wire,
1200A maximum
Pass-Thru Bushing-for use with
Underground Pull Box
End Closure Plate
3/4" HR Type Hub for Service Entrance Module
1" HR Type Hub for Service Entrance Module
1-1/4" HR Type Hub for Service Entrance Module
1-1/2" HR Type Hub for Service Entrance Module
2" HR Type Hub for Service Entrance Module
2" HV Type Hub for Service Entrance Module
2-1/2" HV Type Hub for Service Entrance Module
3" HV Type Hub for Service Entrance Module
3-1/2" HV Type Hub for Service Entrance Module
4" HV Type Hub for Service Entrance Module
PAK Metering Accessories
2" HD Type Hub for New Uni-PAK
2-1/2" HD Type Hub for New Uni-PAK
3" HD Type Hub for New Uni-PAK
3-1/2" HD Type Hub for New Uni-PAK
4" HD Type Hub for New Uni-PAK
Closure Plate for HD Hub Opening
Nema Stud Kit for New 400A Uni-PAK
Nema Stud Kit for New 600A Uni-PAK
Parallel Lug Kit for New 400A Uni-PAK (2) 250 kcmil
Parallel Lug Kit for New 600A Uni-PAK (3) 250 kcmil
Catalog
Number
Selection
For use on old and new style pak units.
Filler plate is not needed for NEW PAK.
(2) Required per 1-Phase meter socket. Residential type
ring and ringless- 200amp max. Meter cannot be
installed while in use. For use with ECPP cover plate.
List
Price $
SRSS
SRSW
SRSTD
19.38
25.03
17.47
ECCP1U
14.20
ECCP2U
14.20
ECCP3U
14.20
ECPP
ECCP3U
ECJS
19.00
14.20
36.74
ECMM5J
23.50
ECMMI5J
20.50
Modular units only.
Add “12” suffix for 12" elbow: BE112 and BE412.
For inches / millimeters conversion, see Application Data section.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-81
Meter Centers
Modular Metering Peplacement Parts Kits
METER
CENTERS
2
Selection
▪
▪
▪
▪
Eliminate the need for Special orders
Stocked and ready for shipment
All kits come with appropriate hardware and instruction sheet for safe installation
Packages are stocked in specified Quantities and cannot be substituted or changed
Part Number
Breaker Covers
GMBC1
Description
Contents
List Price $
Group Metering Breaker Cover - 125Amp Positions
Group Metering Breaker Cover - 200Amp Positions
One Top and bottom black plastic breaker
cover piece, 1 gasket, and a locking clip
Top and bottom black plastic breaker cover
pieces, gasket, and locking clip
10.00
GMBC2
Meter Covers 햲
MMCVR1
Modular Metering Tenant Covers 125A Ring Style
10.00
MMCVR1R
Modular Metering Tenant Covers 125A Ringless
MMCVR2
Modular Metering Tenant Covers 200A Ring Style
MMCVR2R
Modular Metering Tenant Covers 200A Ringless
PAKMCVRR
Tenant cover for Ring Style Uni-Pak Meter Center
PAKMCVRL
Tenant cover for RingLess Uni-Pak Meter Center
1 Ringstyle meter cover welded with
support brackets and painted
1 Ringless style meter cover welded with
support brackets and painted
1 Ringstyle meter cover welded with
support brackets and painted
1 Ringless style meter cover welded with
support brackets and painted
1 Ringstyle meter cover welded with
support brackets and painted
1 Ringless style meter cover welded with
support brackets and painted
Breaker Mounting assembly includes provision
for 125 or 200A breaker
Meter Socket assembly includes jaws, straps,
and hardware - see picture 3 above
14.00
22.00
24.00
22.00
All loose screw bags, labels, instruction
sheet and aluminum sealing ring (No SBJ)
All loose screw bags, labels, instruction
sheet and aluminum sealing ring (No SBJ)
All loose screw bags, labels, instruction
sheet and aluminum sealing ring (No SBJ)
All loose screw bags, labels, instruction
sheet and aluminum sealing ring (No SBJ)
16.00
Meter Socket/Breaker Mounting
MMBMT1
MMSCK1
MMBMT2
MMSCK2
Loose Parts Kits
MMPK11
햲
Modular
Modular
Modular
Modular
Metering
Metering
Metering
Metering
Breaker Mounting S/A 125A
Meter Socket Assembly 125A
Breaker Mounting S/A 200A
Meter Socket Assembly 200A
Modular Metering Loose Parts Kit 125A 1 PHASE
MMPK13
Modular Metering Loose Parts Kit 125A 3 PHASE
MMPK21
Modular Metering Loose Parts Kit 200A 1 PHASE
MMPK23
Modular Metering Loose Parts Kit 200A 3 PHASE
10.00
10.00
10.00
10.00
10.00
10.00
16.00
16.00
16.00
Order CCK or CCK1 for Ring to Ringless Cover
Conversion Kit.
2-82
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
Meter Centers
Modular Metering - Bus Duct Modules
Selection
Busway Application
Common Bus Duct Units (1)
Mechanism
Amperes (3) Phase Type
1
400
3
1
3
600
3
1
3
1
800
3
1
3
1000
1200
1
3
1
3
Class T Fuse
LXD6 Breaker
Class T Fuse
JXD6 Breaker
Class T Fuse
NXD6 Breaker
NXD6 Breaker
MC4BD
MC44BD
MS4UBD
MS44UBD
MC6BD
MC64BD
MS6UBD
MS64UBD
MC8BD
MC84BD
MS8UBD
MS84UBD
MC10BD
MC104BD
MC12BD
MC124BD
AIC
Rating (2)
65,000
100,000
65,000
100,000
65,000
100,000
65,000
65,000
List
Price $
4777.00
7528.00
2679.00
4716.00
7250.00
11326.00
5231.00
8766.00
11515.00
14810.00
8630.00
15262.00
13348.00
18484.00
19445.00
27373.00
1 - All devices are build to order.Tap stack & SBJ sold separately.
2 - 100K AIC Breaker Units available - contact sales office for more information.
3 - Alternate amperages for breaker modules available. Contact sales office for more info.
Tap Stacks
Tap stacks save space by connection Siemens’ Sentron Busway directly to speciallydesigned Siemens circuit breaker, switch, or tap box modules. Common modules are
listed above. Tap stacks require end-user to purchase an additional single bolt joint
coupler and are for indoor use on end-feed applications only.
For inches / millimeters conversion, see Application Data
section.
Tap stacks are produced with the busway.
Contact sales office for more information.
Discount Schedule RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-83
METER
CENTERS
1
JXD2 Breaker
Catalog
Number
2
Siemens offers a direct busway to modular metering
connection. When six or less disconnects are present a
connection can be made directly to the meter module. If
a main is needed Siemens offers breaker options up to
1200amps and switch options up to 800amps.
All breaker and switch modules are available with up to
100,000 AIC ratings, are UL listed, and carry a Nema 1
(indoor) rating. Common service entrance modules are
listed to the right. Lead time may apply. See below for
spacing considerations.
EUSERC Commercial Metering
Commercial Type BY Meter-Main Combinations
Selection
METER
CENTERS
2
Design/Performance Features
▪ Outdoor/Indoor—one design for either
installation.
▪ Ring Type—meets requirements for various
ring type locking provisions.
▪ Test Block Bypass Installed—easy servicing
without interruption.
▪ Main Breaker Field Installed—adaptable to
the job.
▪ Main T-Fuse puller factory installed
(less fuses)—adaptable to the job.
Industry Specifications
▪ ANSI – Standard #C 12.7
▪ NEMA – Standard #250
Standard #PB1
UL
–
Standard
#414
▪
Standard #67
▪ EUSERC – SEC #300
Systems
▪ 100/200 amperes maximum meter
▪ 120/240V AC, 1ø3W, 4 jaw
▪ 208Y/120V AC, 3W network, 5 jaw or
3ø4W, 7 jaw
▪ 240V AC, 1ø3W, 3ø3W, or 3ø4W, 4, 5
or 7 jaw
▪ 10,000 to 100,000 AIC
In addition to local code and National
Electrical Code requirements, the serving
utility may have special requirements for
metering devices. Confirm meter socket
acceptance prior to order placement.
Ring-type Meter-Main Combinations 100-200Amp Max.
240V AC Max
Amps
Cont. Max
Duty AIC
65,000
Tenant
Main
CB
Provision
Circuit
QP/
Breaker QPH/
Provision HQP
Service
Jaws
1Phase- 4
3 Wire
3 Phase7
4 Wire
1 Phase4
3 Wire
100
100,000
T-Fuse
Puller
Service
Feed
Dimensions (inches)
Height Width Depth
MM0202L1100EY
OH
36.00
12.50
4.88
KO
Fig.
1
Wire Range
AL/CU
QJ2/
Circuit
QJH2/
Breaker
QJ2H/
Provision
HQJ2H
Hub
List
Provision Price $
#6-2/0 Box Lug
854.00
RX
MM0303L3100EY
OH
36.00
12.50
4.88
1
#6-2/0 Box Lug
1263.00
MM0202F1100EY
OH
36.00
12.50
4.88
1
#6-2/0 Box Lug
1734.00
MM0202F1100CEY
OH/UG
24.00
20.13
4.88
3
#6-2/0 Box Lug
1586.00
RX
None
3Phase4 Wire
35,000
Catalog
Number
MM0303F3100EY
OH
36.00
12.50
4.88
1
#6-2/0 Box Lug
2322.00
MM0303F3100CEY
OH/UG
24.00
20.13
4.88
3
#6-2/0 Box Lug
2121.00
MM0202L1200EY
OH
45.00
14.25
6.38
2
#1/0-250 kcmil
1661.00
MM0202L1200CEY
OH/UG
30.00
24.25
6.38
4
#1/0-250 kcmil
7
1 Phase4
3 Wire
1776.00
HC
3 Phase7
4 Wire
MM0303L3200EY
OH
45.00
14.25
6.38
2
#1/0-250 kcmil
2207.00
MM0303L3200CEY
OH/UG
30.00
24.25
6.38
4
#1/0-250 kcmil
2356.00
MM0202F1200EY
OH
45.00
14.25
6.38
2
#1/0-250 kcmil
2322.00
MM0202F1200CEY
OH/UG
30.00
24.25
6.38
4
#1/0-250 kcmil
200
1 Phase4
3 Wire
100,000
T-Fuse
Puller
3 Phase7
4 Wire
Dimensions
shown are representative of outside box
length, width & depth (± 1⁄8”) and do not include
allowances for mounting bumps, endwalls, covers, hubs
or hardware protrusions. Consult factory for specific
details if required.
2-84
2471.00
HC
None
MM0303F3200EY
OH
45.00
14.25
6.38
2
#1/0-250 kcmil
3004.00
MM0303F3200CEY
OH/UG
30.00
24.25
6.38
4
#1/0-250 kcmil
3250.00
Price
Price
does not include breaker or fuses.
does not include fuses.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule RESI
EUSERC Commercial Metering
Commercial Type BY Meter-Load Center Combinations
MC1224B1100CEY
Selection
MC2442F3200CEY
2
METER
CENTERS
Design/Performance Features
▪ Outdoor/Indoor—one design for either installation.
▪ Ring Type—meets requirements for various ring type locking
provisions.
▪ Test Block Bypass Installed—easy servicing without
interruption.
▪ Main Breakers Factory Installed.
▪ Main T-Fuse Pullers Factory Installed (less fuses).
▪ Compact wall-hung design reduces material and labor costs.
Systems
▪ 100A, 200A maximum meter
▪ 120/240V AC, 1ø3W, 4 jaws
▪ 240V AC, 3ø4W, 7 jaws
▪ 10,000 thru 100,000 AIC
Accessories — See below.
In addition to local code and National Electrical Code
requirements, the serving utility may have special
requirements for metering devices. Confirm meter socket
acceptance prior to order placement.
Ring Type Commercial Meter-Load Center Combinations with Test Block Bypass
240 V AC Max.
Amps Main
Cont. Breaker
Duty Factory Inst.
AIC Rating
No. of Max.
Spaces Circuits Service
Catalog
Number
STD.
AIC
MAX
AIC
Dimensions (inches)
Wire
Wire Range
AL/CU
KO
Fig.
List
Price
Height Width
Depth
Hub
Prov.
36.00
24.00
30.00
12.50
20.13
25.75
4.88
4.88
6.38
RX
RX
HC
#6-2/0 Box Lug
#6-2/0 Box Lug
#1/0-250 kcmil
7
8
9
1663.00 2
1727.00 2
3116.00 2
100,000 26.00
100,000 42.00
24.25
27.25
4.88
6.38
RX
HC
#6-2/0 Box Lug
#1/0-250 kcmil
10
11
3135.00 4
3924.00 4
Notes
1 Phase—3 Wire, 4 Jaws, Factory Installed Main Breaker
100
Q2100
200
QN2200RH
10
12
24
20
24
40
OH
MC1020B1100EY 10,000
OH/UG MC1224B1100CEY 10,000
OH/UG MC2440B1200CEY 10,000
65,000
42,000
22,000
3 Phase—4 Wire, 7 Jaws, Factory Installed T-Fuse Puller
100
200
T-Fuse Prov. 18
T-Fuse Prov. 24
30
42
OH/UG MC1830F3100CEY 100,000
OHUG MC2442F3200CEY 100,000
Safety Socket Accessories
Description
Hubs
Conduit Size
1"
11⁄4"
11⁄2"
2"
2"
21⁄2"
21⁄2"
3"
Closure
Plates
Adapter Plates
Bottom Only
Dimensions
Catalog
Number
EC38596
EC38597
EC38598
EC38599
ECHC200
EC38600
ECHC250
ECHC300
EC38595
ECHC000
37.81
37.81
23.96
23.96
72.00
107.57
108.00
175.00
38.34
24.00
ECHCRXA
22.50
shown are representative of outside box
length, width & depth and do not include allowances for
mounting bumps, endwalls, covers, hubs or hardware
protrusions.
Discount Schedule RESI
List
Price $
UL
Description
Catalog
Number
Fifth Jaw
100A
200A
UX001WL
UX005B
List
Price $
23.50
103.00
Listed to field change main breaker to higher AIC.
does not include fuses.
Price
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-85
EUSERC Commercial Metering
Type BY Wiring Diagrams
Selection
Commercial All-In-Ones
MC1224B1100CEY
METER
CENTERS
2
MC1020B1100EY
MC1830F3100CEY
2-86
MC2442F3200CEY
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MC2440B1200CEY
EUSERC Commercial Metering
Type BY Dimensions & Knockout Data
Selection
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
2
Figure 1
METER
CENTERS
Knockout Code—Conduit Sizes
= 1⁄4
A = 1⁄2
B = 1⁄2, 3⁄4
C = 1⁄2, 3⁄4, 1
D = 1⁄2, 1
E = 1⁄2, 3⁄4, 1, 11⁄4
F = 1⁄2, 11⁄4, 11⁄2
G = 3⁄4
H = 3⁄4, 1
J = 3⁄4, 1, 11⁄4
K = 3⁄4, 11⁄4
M = 3⁄4, 1, 11⁄4, 11⁄2
N = 3⁄4, 1, 11⁄4, 11⁄2, 2
P = 1, 11⁄4
Q = 1, 11⁄4, 11⁄2
R = 1, 11⁄4, 11⁄2, 2
S = 1, 11⁄4, 11⁄2, 2, 21⁄2
T = 11⁄4
U = 11⁄4, 11⁄2
V = 11⁄4, 11⁄2, 2
W = 11⁄4, 2
X = 11⁄4, 11⁄2, 2, 21⁄2
Y = 11⁄2, 2
Z = 11⁄2, 2, 21⁄2
AA = 11⁄2, 2, 21⁄2, 3
BB = 11⁄2, 2, 21⁄2, 3, 31⁄2
CC = 2, 21⁄2, 3, 31⁄2
EE = 2, 21⁄2, 3
FF = 21⁄2, 3
GG = 21⁄2, 3, 31⁄2
HH = 21⁄2, 3, 31⁄2, 4
JJ = 31⁄2, 4
LL = 3
VV = 2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-87
METER
CENTERS
2
Notes
2-88
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3SPEEDFAX
TM
2007-2008 Safety Switches
Contents
3-6
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
3-15
3-16
3-17
3-17
3-17
3-17
3-17
3-18
3-18
3-19
3-19
3-19
3-20
3-20
3-20
3-20
3-20
3-21 – 3-24
3-25 – 3-26
3-27
3-28
3-29 – 3-30
3-31
3-32 – 3-33
3-34
SAFETY
SWITCHES
Residential Commercial Industrial
3-2
3-3
3-4
3-5
3
Safety Switch Guide Form Specifications
Feature Comparison
Enclosure Types
Catalog Numbering System
General Duty Safety Switches
Plug Fuse Enclosed Type, 120/240V Fusible—Selection
60A Special Application Type, 240V Non-Fusible—Selection
General Duty Switches—Features
240V Fusible and Non-Fusible—Selection
Heavy Duty Safety Switches
Heavy Duty Switches—Features
240V Fusible—Selection
600V Fusible—Selection
600V Non-Fusible—Selection
Type 4/4X and 12 with Viewing Window—Selection
Special Applications Safety Switches
4-Pole and 6-Pole—Selection
Interlocked Receptacle—Selection
Non-Metallic—Selection
Accessories—General and Heavy Duty Switches
Class R Fuse Clips
Class J Fusing
Class T Fuse Adapter Kits
Neutral Kits
200% Neutral Kits
Auxiliary Contacts
Fuse Puller Kits
Copper Lug Kits
Equipment Ground Kits
Isolated Ground Kits
Interchangeable Hubs
Compression Lug, Neutral Barrier Kits
Lugs and Wire Ranges
Multiple Padlocks
Kirk-Key Interlocks
Dimensions and Weights
General and Heavy Duty Switches
Type 1 and 3R Knockout Diagrams
Non-Metallic and Receptacle Switch Dimensions
4-Pole and 6-Pole Switch Dimensions
Double-Throw Switches
Selection
Dimensions
Enclosed Rotary Disconnect Switches
VBII Safety Switch Replacement Parts
Type VBII Safety Switches
Guide Form Specifications
Product Overview
Heavy Duty
Double Throw
Application
General Duty Switches are intended for
applications where reliable performance and
continuity of service are needed, but where
duty requirements are not severe and usual
service conditions prevail. (These switches
are intended for use primarily with supply
circuits rated 240V AC or less where the
available fault current is less than 100,000A
when used with Class R or T fuses or
10,000A max. when used with Class H fuses.)
Heavy Duty Switches are intended for use in
applications where:
1. Rugged construction, reliable performance,
continuity of service and ease of maintenance are emphasized, or
2. Available fault currents higher than
10,000A are likely to be encountered, such
as in manufacturing plants, mass production industries, and commercial, institutional and other large buildings served by network systems or transformers of higher
capacities.
3. System voltage is 600V AC or DC Max.
4. A Type 12 or 4 / 4X enclosure is required.
Double throw switches are intended to
transfer loads from one power source to
another. All 2 & 3 pole double throw
switches are suitable for use as service
equipment. All are UL Listed. Switches are
rated for use on systems with an available
fault current of up to 10,000 AIC when
protected with Class H fuses or either
100,000 or 200,000 AIC when protected with
Class R, J or Class T fuses. They can also be
used to connect a single source of power to
either of two loads, In this application it is
necessary to field modify fusible switches
so that the fuses are on the load side of the
switching mechanism.
Short Circuit
Withstand
Ratings
Suitable for use on systems capable of
delivering not more than 100,000 RMS
symmetrical amperes of fault current as
follows:
Suitable for use on systems capable of delivering not more than 200,000 RMS symmetrical
amperes of fault current as follows:
SAFETY
SWITCHES
3
General Duty
Sw. Rating
30-600A
30-600A
30-600A
100-600A
Fuses
Cover
Interlocks
AIC Rating
10,000
10,000
100,000
100,000
Protective Device
Circuit Breaker
Class H Fuse
Class R Fuse
Class J or T Fuse
Sw. Rating & Tpye
All Heavy Duty & DT
30-600A HD & DT
60A Compact HD
GD & 4P DT
30-600A HD
30-600A DTF & DTNF DT
800 & 1200A HD & DT
AIC Rating
10,000
10,000
100,000
100,000
200,000
200,000
200,000
Protective Device
Circuit Breaker
Class H Fuse
Class R, J or T Fuse
Class R, J or T Fuse
Class R, J or T Fuse
Class R, J or T Fuse
Class L or T Fuse
Fusible switches will accept the following
UL class fuses:
Fusible switches will accept the following
UL class fuses:
Fusible switches will accept the following
UL class fuses:
30 “LF” - 30A max plug Fuses
30-600A “GF” Class H & K, Class R with kit
100-600A “GF” Class J-move base
100-200 “GF” Class T with kit
400-600A “GF” Class T-move bases
30-600A “HF” Class H & K, Class R with kit
30-600A, 600V “HF” Class J-move base
100-600A, 240V “HF” Class J-move base
100-200A “HF” Class T with kit
400-600A “HF” Class T-move bases
800-1200A “HF” Class L, Class T with kit
30-200A “DT” & “F” Class H & K, Class R with kit
30 & 60A 600V “DT” Class J-move base
100-200A “DT” Class J-move base, Class T with kit
400-600A “DT” Class J-standard, Class T-move bases
400A “F” Class T-standard
Voidable – cover interlocks on switches
prevent the switch door from being opened
when in the “ON” position. No cover
interlock on 30A Type 3R or on plug fuse
type switches.
Voidable dual cover interlocks standard on
all heavy duty switches. Prevents cover from
being opened when switch is in the “ON”
position and prevents switch from being
turned “ON” when door is opened.
Dual cover interlocks standard on all double
throw switches. Prevents cover from being
opened when switch is in the “ON” position
and prevents switch from being turned “ON”
when door is opened.
Underwriters’
Listed by UL under file #E4776 as enclosed switches and also suitable for use as service equipment (where applicable).
Laboratories, Inc. UL98 Enclosed and Deadfront Switches.
NEMA
Specifications
Meet NEMA standard KS-1-1990 for type
GD switches.
Meet NEMA standard KS-1-1990 for type
HD switches.
Meet NEMA standard KS-1-1990 type GD
for “DTG” & type HD for “DT”, “F” & “NF”
switches.
Groundable
Neutral
Fusible switches have groundable neutral
blocks factory installed. Non-fusible
switches accept field addable neutrals.
All neutrals are bondable for service
entrance use.
All switches (both Fusible and Non-Fusible)
are either supplied with factory installed
neutrals or accept field addable neutrals.
All neutrals are bondable for service
entrance use.
All except 4 pole switches will accept field
addable neutrals except that “DTG” 100 &
200A switches are also available with
factory installed neutrals. All neutrals are
bondable for service entrance use.
Padlocks
Padlockable cover latch. OFF padlock
provisions on handle.
Padlockable cover latch and multiple OFF
padlock provisions on handle.
Padlockable cover latch and multiple OFF
padlock provisions on handle.
HP & Load
Break Ratings
All General Duty, Heavy Duty and Double Throw Switches are both load break and horsepower rated.
The
protective device can either be a fuse installed in a
fusible switch or an upstream fuse or circuit breaker
protecting a non-fusible switch. The ampere rating of the
upstream protective device must not exceed the switch
ampere rating.
3-2
All
4 pole and fusible double switches with catalog numbers starting with “F” are rated 100,000 AIC max.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Class
T kit available for 240V max. applications on 1200A
switches.
Feature Comparison
Product Overview
General
Duty
Heavy
Duty
Double
Throw
Features /
Ratings
▪
▪
▪
30 thru 600 Amps
▪
▪
800 and 1200 Amps
▪
▪
240 Volt AC
▪
▪
600 Volt AC
▪
▪
250 Volt DC
▪
▪
600 Volt DC
▪
▪
Double-break visible blade design
(30-200A)
▪
▪
▪
Quick-make, quick-break switching action
▪
▪
▪
Highly visible ON/OFF handle indication
Handle design for hook stick operation
▪
▪
▪
▪
Padlockable cover latch
▪
▪
▪
Padlockable handle
▪
Single voidable cover interlock
▪
▪
Dual voidable cover interlock
▪
▪
▪
Type 1 enclosure
▪
▪
▪
Type 3R enclosure
▪
▪
Type 12 enclosure
▪
▪
Type 4 / 4X enclosures
▪
▪
▪
Generous wiring gutters that meet UL and
NEC wire-bending space requirements
▪
▪
▪
Lugs suitable for copper or aluminum at
60˚ or 75˚C
▪
▪
▪
CU/AL wire lugs that meet UL 486B
requirements
▪
▪
Suitable for field-convertible
compression connectors
▪
▪
▪
All plated copper current carrying parts
(except lugs)
▪
▪
▪
Spring reinforced Fuse Clips
(except 30A general duty)
▪
▪
Clear pivoting line terminal shield
▪
▪
Replacement parts
▪
Field addable 200% neutral
▪
▪
▪
400
▪
▪
▪
Provisions for UL Class J and L Fuses
▪
▪
Metal nameplate
▪
▪
Aux. switch kits
▪
Type 4X with stainless steel interior parts
▪
Rolled flange enclosure design (30-200A)
▪
UL approved HP ratings for
high efficiency motors
▪
& 600A fusible, double-throw switches accept only
Class J or T fuses.
general duty switches have fuse clips constructed
of spring type copper.
30A
Provisions for UL Class T, R and H Fuses
▪
▪
SAFETY
SWITCHES
▪
3
▪
▪
on
Isolated ground kits
Not
supplied on 30A outdoor & plug fuse switches.
Type VBII in stainless steel enclosures.
30-200A
60-200A.
in operation
off
Double Break Switching Action
Like the time-proven Vacu-Break Design,
the Siemens VBII double break switching
action breaks the arc in two places in
30-200A ratings. This reduces heat
generation and increases switching
speed by doubling the breaking distance.
The result is enhanced performance and
increased longevity. We also provide the
most visible blade design available today.
Unlike conventional knife blade switches,
the blades are self-aligning to ensure
positive contact. In addition, they have
no wear and friction point since the
“electrical hinge” has been eliminated.
The result is a very fast, positive and
reliable switching action for even the
most severe applications.
200A
general duty switches have aluminum neutral
assemblies.
GD & DT and 100-1200A HD switches will
accept Class T fuses.
100-600A
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-3
Safety Switches
General Duty and Heavy Duty
Product Overview
Enclosure Types
□
A Type 1 enclosures are intended for indoor use primarily to
provide protection against contact with the enclosed equipment
in locations where unusual service conditions do not exist.
SAFETY
SWITCHES
3
B Type 3R enclosures are intended for outdoor use primarily
□
to provide a degree of protection against falling rain and sleet
and must remain undamaged by the formation of ice on the
enclosure. They are not intended to provide protection against
conditions such as dust, internal condensation, or internal icing.
□
C Type 4, 4X enclosures are intended for indoor or outdoor
use primarily to provide a degree of protection against
windblown dust, rain, splashing water and hose-directed water.
They are not intended to provide protection against conditions
such as internal condensation or internal icing. Also meets
4X definition by providing a high degree of protection
against corrosion. Siemens 30-200A stainless steel 4X switches
are supplied stainless interior parts and hardware as standard.
□
A
□
B
□
C
□
D
□
E
□
D Type 4 enclosures are intended for indoor or outdoor use
primarily to provide a degree of protection against windblown
dust, rain, splashing water and hose-directed water. They are
not intended to provide protection against conditions such as
internal condensation or internal icing.
□
E Type 12 enclosures are intended for indoor use primarily to
provide a degree of protection against dust, falling dirt and
dripping water. They are not intended to provide protection
against conditions such as internal condensation.
Type 7/9 enclosures for use in hazardous locations. Use with
molded case switches listed on page 6-62. For enclosure
catalog numbers and dimensions see page 5-2 & 5-12.
Note: Type 1 60A General Duty and Type 1 30 & 60A Heavy
Duty Switches have tangential knockouts which are UL approved
for bonding conduits for non-service entrance conductors.
Load Break Ratings
Horsepower Ratings
All Siemens safety switches are load break rated. The load
break rating is assigned by UL after the switching unit has successfully performed the following tests for general use
enclosed switches:
All Siemens safety switches, where appropriate, are horsepower rated. The assignment of such ratings is made by UL
only after the switching unit has undergone tests to determine
its acceptability. In addition, the unit must successfully perform
on an overload test series which includes repeated interruption
of the locked rotor current of the motor for which it is to be
rated as follows:
Load Break Ratings
Switch
Ampere
Rating
Number of
ON/OFF
Operations
per Minute
30–100
6
6000
4000
10000
200
5
6000
2000
8000
400
4
1000
5000
6000
600
3
1000
4000
5000
Number of Operations
With
Without
Current Current
Total
800
2
500
3000
3500
1200
1
500
2000
2500
Horsepower Ratings
Max HP
Rating
Number of ON/OFF
Operations per minute
Number of Cycles
of Operation
100
6
50
500
1
10
VBII
Type 12 switches are also rated 3R & 3S for outdoor
use. Type 3R is defined in B above. 3S rated enclosures
provide a degree of protection against windblown dust
and allow operation when the enclosure is ice laden.
3-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Numbering System
Type VBII Safety Switch Catalog Numbering System
H
F
3
6
4
Product Overview
N
CH
CJ
CR
CU
G
H
L
PN
W
L = General Duty
10k AIC Max.
(Plug Fused &
60A Max
Non-Fused)
G = Gen. Duty
H = Heavy Duty
DT = Double Throw
DTG = General Duty DT
=
=
=
=
=
=
=
=
=
Crouse-Hinds Receptacle
Factory J Fuse Spacings
Class R Clips Installed
Factory-Installed Copper Lugs
Factory-Installed Ground Bar
Height or Size Reduced
Oversized Enclosure
Pyle-National Receptacle
Viewing Window
3
Fused or Non-Fused
Enclosure Type
Omit
R
S
X
J
XL
Number of Poles
1
2
3
4
6
=
=
=
=
=
=
SAFETY
SWITCHES
F = Fused
NF = Non-Fused
=
=
=
=
=
CU
Special Applications With:
Switch Type
1
2
3
4
6
R
Type 1, Indoor
Type 3R, Outdoor
Type 4 / 4X, Stainless Steel
Type 4 / 4X, Non-Metallic
Type 12, Industrial
Type 4/4X Non-Metallic
Less Line & Load Lugs
With or Without Neutral
Omit = Less Neutral
N
= With Neutral
Voltage
Amperes
1 = 120V or 120/240V
2 = 240V
6 = 600V
1
2
3
4
=
=
=
=
30A
60A
100A
200A
5
6
7
8
=
=
=
=
400A
600A
800A
1200A
Type VBII Accessories Catalog Numbering System
H
Switch Type
H = Heavy Duty
G = General Duty
Accessory Type
A1
A2
A3
CL
=
=
=
=
G
G2
LC
N
N2
P
R
T
=
=
=
=
=
=
=
=
Auxiliary Switch 1/NO and 1/NC
Auxiliary Switch 2/NO and 2/NC
Auxiliary Switch Low Current
Compression Lug Barrier /
Mounting Kit
Ground Lug Kit
Insulated Ground Lug Kit
Copper Lug Kit
Neutral
200% Neutral
Fuse Puller Kit
Class R - Fuse Clip Kit
Class T - Fuse Kit
R
6
4
Amperes
1
2
12
3
23
123
1234
4
56
5678
78
=
=
=
=
=
=
=
=
=
=
=
30A
60A
30/60A
100A
60/100A
30/60/100A
30/60/100/200A
200A
400/600A
400/600/800/1200A
800/1200A
Maximum Voltage
2 = 240V Max
6 = 600V Max
Note: Catalog numbering systems above do not apply to
4-pole double throw switches & accessories.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-5
General Duty Enclosed Switches
Plug Fuse and 60A Special Application Type
Selection
Features
SAFETY
SWITCHES
3
Compact size
Horsepower rated
Indoor and outdoor enclosures
Quick make-quick break mechanism
Visible “ON”-“OFF” indications
Padlock-off handle feature
Door padlock provision
Bondable neutral (where indicated)
Lugs suitable for copper or aluminum wire
UL Listed
Fuses — not included
Switches accept Edison base plug
fuses
▪ Hubs — see page 3-20
▪ Lugs — see page 3-20
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Dimensions (inches)
Type
Height
Width
Depth
1
3R
81⁄4
81⁄4
51⁄2
53⁄8
3
31⁄8
Wire Range Table
Switch Type
Wire Range
120/240 Volt Fusible
30 Amp
Cu/Al
#14 to #8 AWG
120/240 Volt Non-Fusible
60 Amp
Cu/Al
#14 to #3 AWG
Indoor — Type 1
Ampere
Rating
Catalog
Number
Outdoor — Type 3R
Horsepower Ratings
1-Phase, 2-Wire
List
Price $
Ship. Wt.
Pkg. of 10
Catalog
Number
List
Price $
Ship Wt.
Pkg. of 10
80.00
35
LF111NR
166.00
35
Standard
Maximum
120/240 Volt Fusible
1-Pole and Solid Neutral
30
LF111N
120 Volt — 1-Phase, 2-Wire
2-Pole and No Neutral
30
2
120/240 Volt — 1-Phase, 2-Wire
Use 2-Pole and Solid Neutral
2-Pole and Solid Neutral
30
⁄2
1
LF211N
120/240 Volt — 1-Phase, 3-Wire
98.00
35
LF211NR
203.00
35
176.00
35
11⁄2
3
240 Volt Non-Fusible
2-Pole Special Application Switch
60
—
—
For inches / millimeters conversion, multiply inches by
25.4.
Dual
horsepower ratings:
Std. — applies when non-time delay plug fuses
are installed.
Max — applies when time-delay plug fuses are installed.
3-6
1 or 2-Pole — No Fuse
—
LNF222R
240 Volt — 1-Phase, 2-Wire
Has
service entrance label.
UL Listed as “Enclosed Switches” (suitable for use as
service equipment where indicated) under File #E4776.
(NEMA) — Type G.D.
Federal Spec. — W-S-865C — type LD or type NDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
—
10
Bottom
cable entry and exit only. No hub provision supplied. GSGK60 is included and factory installed.
Line lugs will accept and are UL approved for #14 to #6
Cu/Al cable.
Features also apply to 2- and 3-pole, 30A general duty
switches on page 3-8.
Discount Schedule GDSS
General Duty Safety Switches
Features (60-600A)
Product Overview
5
11
SAFETY
SWITCHES
9
3
6
1
8
4
7
2
12
1. Cover interlock
2. Tangential knockouts through
600A for easy conduit lineup
3
10
5. Generous wiring gutters that
meet or exceed NEC
wire-bending space requirements
3. Quick-make, quick-break
operating mechanism that ensures
positive operation
6. Visible blade, double-break
switch action
4. Provisions for T, R, J, H, and
K class fuses (T & J 100-600A)
8. Highly visible red handle grip
7. Positive 2 or 3 point mounting
9. Informative door labeling which
includes replacement parts list
10. Handle and cover
padlocking provisions
11. Side-hinged door that opens
180 degrees for easier wiring
12. A unique enclosure design that
adds rigidity and strength. Its
rolled edge prevents cuts and
scrapes to conductors and to
installer’s hands
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-7
General Duty Safety Switches
SAFETY
SWITCHES
3
Selection
Horsepower Ratings
Indoor — Type 1
System
Ampere
Rating
Catalog
Number
Outdoor — Type 3R
240V AC
2-Phase,
4-Wire
3-Phase,
3-Wire
250
Volt
DC
Std.
Std.
Std.
Ship Wt.* Catalog
Std. Pkg. Number
List
Price $
1-Phase,
Ship Wt.* 2-Wire
Std. Pkg. Std. Max.
127.00
217.00
437.00
907.00
2753.00
2774.00
5438.00
5467.00
035
014
023
047
128
153
133
159
GF221NR
GF222NR
GF223NR
GF224NR
GF225NR H
GF225NR
GF226NR H
GF226NR
203.00
334.00
492.00
1287.00
3730.00
3752.00
6897.00
6929.00
035
014
024
048
130
157
135
159
011⁄2
03
071⁄2
15
15
15
15
15
03
10
15
—
—
—
—
—
—
—
—
—
—
—
—
—
203.00
334.00
581.00
1287.00
3262.00
3287.00
6091.00
6124.00
024
015
025
049
136
158
138
161
GF321NR
GF322NR
GF323NR
GF324NR
GF325NR H
GF325NR
GF326NR H
GF326NR
302.00
454.00
840.00
1524.00
3934.00
3955.00
8171.00
8205.00
024
015
025
050
138
162
141
165
011⁄2
03
071⁄2
15
15
15
15
15
03
10
15
—
—
—
—
—
—
—
—
—
—
—
—
—
166.00
209.00
492.00
887.00
024
012
023
046
GNF321R
GNF322R
GNF323R
GNF324R
302.00
466.00
840.00
1505.00
024
013
024
047
—
—
—
—
3
10
15
15
—
—
—
—
—
—
—
—
0071⁄2
015
030
060
—
—
—
—
05
10
20
40
—
—
15
15
—
—
—
—
125
200
—
—
50
—
List
Price $
Max.
Max.
240 Volt Fusible
2-Pole, 2-Fuse, and Solid Neutral
030
060
100
200
400
400
600
600
GF221N
GF222N
GF223N
GF224N
GF225N H
GF225N
GF226N H
GF226N
240 Volt AC/250 Volt DC
3-Pole, 3-Fuse, and Solid Neutral
030
060
100
200
400
400
600
600
GF321N
GF322N
GF323N
GF324N
GF325N H
GF325N
GF326N H
GF326N
—
—
—
—
—
—
—
—
03
071⁄2
15
25
50
50
75
75
0071⁄2
015
030
060
125
125
200
200
05
10
20
40
50
50
—
—
240 Volt AC/250 Volt DC
—
—
—
—
—
—
—
—
03
071⁄2
15
25
50
50
75
75
0071⁄2
015
030
060
125
125
200
200
05
10
20
40
50
50
—
—
240 Volt Non-Fusible
2-Pole or 3-Pole
240 Volt AC/250 Volt DC
030
060
100
200
GNF321
GNF322
GNF323
GNF324
400
600
GNF325
GNF326
* In pounds (lbs).
Dual horsepower ratings: Std.- applies when non-time
delay fuses are installed. Max.- applies when timedelay fuses are installed.
2275.00 114
4350.00 116
3-8
Use 600V Switch — HNF365R
Use 600V Switch — HNF366R
These switches are UL-listed for application on
grounded B-phase systems.
Suitable for use on 3-phase motor loads.
Service entrance labeled.
Has provision for ECHA type hub.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5
switches per standard package.
switches per standard package.
reduced switch (45.25 rather than 56 inches in
height) for use with 500MCM or smaller conductors.
10
Height
Discount Schedule GDSS
Heavy Duty Safety Switches
Features
15
3
20
2
17
11
16
9
3
4
SAFETY
SWITCHES
1
5
18
6
13
19
8
14
12
1. Quick-make, quick-break operating mechanism
that ensures positive operation.
7
2. Visible blade, double-break switching action.
3. Arc chutes dissipate heat and prolong switch life.
13. Spring reinforced fuse clips that assure reliable
contact for cool operation.
4. Highly visible red handle grip.
Designed for hook stick operation.
14. Door latch securely holds door closed and
allows cover padlocking.
5. Defeatable dual cover interlock.
15. Front removable mechanical lugs that are
suitable for CU/AI 60 or 75° C conductors.
6. Center punch provided for field drilling
to allow ON padlocking.
10
12. Unique enclosure design increases rigidity and
prevents cuts and scrapes to conductors and
installer’s hands.
7. Handle can be padlocked in the OFF position
with up to (3) padlocks with 5/16" hasps.
8. Generous top, bottom and side gutters that
meet or exceed NEC wire-bending space
requirements.
16. Lugs are field convertible to copper
body and to a wide variety of compression
connectors.
17. Hinged clear line terminal shield
with probe holes for inspecting or
testing line side terminals.
9. Informative door labeling which includes
replacement parts list.
18. Embossed aluminum nameplate on Heavy
Duty Switches provides highly visible ON/OFF
indication.
10. Tangential knockouts through 600A for easy
conduit lineup.
19. Drawn cover for increased rigidity
and resistance to abuse.
11. Side-hinged door that opens past 180 degrees
for easier wiring.
20. Top key hole and bottom mounting holes
provide easy 2 or 3 point mounting.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-9
Heavy Duty Safety Switches
SAFETY
SWITCHES
3
Selection
Horsepower Ratings
Indoor — Type 1
System
Ampere
Rating
Catalog
Number
List
Price $
Outdoor — Type 3R
Ship Wt.* Catalog
Std. Pkg. Number
List
Price $
240V AC
1-Phase,
Ship Wt.* 2-Wire
Std. Pkg. Std. Max.
2-Phase,
4-Wire
3-Phase,
3-Wire
Std.
Std.
Max.
Max.
250
Volt
DC
240 Volt Fusible
2-Pole, 2-Fuse, and Solid Neutral
0030
0060
0100
0200
0400
0400
0600
0600
800
1200
3-Pole, 3-Fuse, and Solid Neutral
0030
0060
0100
0200
0400
0400
0600
0600
0800
1200
(Also used for 2-Pole, 2-Wire Applications)
HF221N
257.00 012
HF222N
512.00 018
HF223N
781.00 023
HF224N
1391.00 047
HF225NH 3390.00 129
HF225N
3416.00 153
HF226NH 6237.00 133
HF226N
6266.00 155
HF227N
11116.00 365
HF228N ■ 13688.00 385
HF221NR
HF222NR
HF223NR
HF224NR
HF225NRH
HF225NR
HF226NRH
HF226NR
HF227NR
HF228NR ■
487.00
914.00
1174.00
1700.00
4536.00
4559.00
8317.00
8351.00
13270.00
18454.00
013
019
024
048
131
157
135
159
365
385
011⁄2
03
071⁄2
15
15
15
15
15
—
—
240 Volt AC/250 Volt DC
03
10
15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
011⁄2
03
071⁄2
15
15
15
15
15
—
—
03
10
15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
011⁄2
03
071⁄2
15
03
10
15
—
—
—
—
—
(Also used for 3-Pole, 3-Wire Applications)
HF321N
323.00 014
HF322N
547.00 019
HF323N
906.00 025
HF324N
1570.00 049
HF325NH
4161.00 137
HF325N
4183.00 158
HF326NH
7073.00 139
HF326N
7104.00 161
HF327N
13591.00 375
HF328N
16946.00 395
HF321NR
HF322NR
HF323NR
HF324NR
HF325NRH
HF325NR
HF326NRH
HF326NR
HF327NR
HF328NR
620.00
979.00
1400.00
1906.00
4643.00
4183.00
9354.00
9389.00
17377.00
21095.00
015
020
026
050
138
162
142
165
375
388
—
—
—
—
—
—
—
—
—
—
003
0071⁄2
015
025
050
050
075
075
100
100
0071⁄2
015
030
060
125
125
200
200
250
250
05
10
20
40
50
50
50
50
50
50
240 Volt AC/250 Volt DC
—
—
—
—
—
—
—
—
—
—
003
0071⁄2
015
025
050
050
075
075
100
100
0071⁄2
015
030
060
125
125
200
200
250
250
05
10
20
40
50
50
50
50
50
50
240 Volt Fusible
2-Pole, 2-Fuse
0030
0060
0100
0200
3-Pole, 3-Fuse
0030
0060
0100
0200
400
600
800
Type 4/4X Stainless
Type 12 Industrial
HF221S
HF222S
HF223S
HF224S
HF221J
HF222J
HF223J
HF224J
013
019
024
048
729.00
881.00
1274.00
2017.00
013
019
024
048
240 Volt AC/250 Volt DC
—
—
—
—
003
0071⁄2
015
025
0071⁄2
015
030
060
05
10
20
40
(Also used for 2-Pole, 2-Wire Applications in 400–800A Ratings) 240 Volt AC/250 Volt DC
HF321S
HF322S
HF323S
HF324S
HF325S
HF326S
HF327S ■
■ Built to order. Allow 2–3 weeks for delivery.
* In pounds (lbs).
Height reduced switch (45.25 rather than 56 inches in
height) for use with 500MCM or smaller conductors.
3-10
2216.00
2507.00
4952.00
7519.00
2307.00
2707.00
5759.00
7965.00
16315.00
23672.00
31830.00
014
020
025
049
154
157
370
HF321J
HF322J
HF323J
HF324J
HF325J■
HF326J■
HF327J■
767.00
939.00
1414.00
2185.00
4741.00
8957.00
16792.00
014
020
025
049
110
161
365
Dual horsepower ratings: Std.- applies when non-time
delay fuses are installed. Max.- applies when timedelay fuses are installed.
These switches are UL-listed for application on
grounded B-phase systems and are suitable for
3-phase motor applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
011⁄2
3
071⁄2
15
15
15
—
3
10
15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
003
0071⁄2
015
025
50
75
100
0071⁄2
015
030
060
125
200
250
—
10
20
40
50
50
50
When a neutral is required use a field installed
neutral kit.
Suitable for use as service entrance equipment.
Also rated Type 3S/3R.
Discount Schedule HDSS
Heavy Duty Safety Switches
Selection
Horsepower Ratings
Catalog
Number
List
Price $
Ship Wt.* Catalog
Std. Pkg. Number
List
Price $
480V AC
600V AC
1-Phase,
Ship Wt.* 2-Wire
Std. Pkg. Std. Max.
3-Phase,
3-Wire
1-Phase,
2-Wire
3-Phase,
3-Wire
Std.
Std.
Std.
Max.
Max.
250 600
Volt Volt
Max. DC DC
600 Volt Fusible
2-Pole, 2-Fuse
0030
0060
0100
0400
0600
480 Volt AC/600 Volt AC/600 Volt DC
HF261
HF262
HF263
HF265■
HF266■
553.00
656.00
1227.00
4663.00
7813.00
015
020
026
149
150
HF261R
HF262R
HF263R
HF265R ■
HF266R ■
984.00
1154.00
1788.00
5702.00
11241.00
015
020
027
152
155
03
05
10
—
—
071⁄2
20
30
50
50
HF361R
HF361R L
HF362R
HF362RL
HF363R
HF364R
HF365R H
HF365R
HF366R H
HF366R
HF367R
HF368R
984.00
1128.00
1154.00
1755.00
1788.00
2444.00
5877.00
5903.00
11676.00
11702.00
17975.00
22116.00
015
020
020
025
025
049
137
157
141
161
365
385
333
3
5
5
5
25
—
—
—
—
—
—
07 ⁄2
071⁄2
20
20
20
50
—
—
—
—
—
—
HF361
568.00
654.00
HF361L
HF362
676.00
—
—
HF363
1301.00
HF364
1830.00
HF365H 4875.00
HF365
4898.00
HF366H 8475.00
HF366
8503.00
HF367
14825.00
HF368
18724.00
14
19
19
—
24
48
136
154
138
157
365
383
HF361NR
HF362NR
HF363NR
HF364NR
HF365NR
HF366NR
HF367NR
HF368NR
1062.00
1231.00
1940.00
2586.00
6368.00
12111.00
18815.00
22955.00
015
020
026
050
162
165
375
388
03
05
10
25
—
—
—
—
07 ⁄2
20
30
50
—
—
—
—
1
03
10
15
50
50
10
25
40
—
—
—
—
—
—
—
—
—
—
—
—
05
10
20
40
50
15
30
50
50
50
HF361N
HF362N
HF363N
HF364N
HF365N
HF366N
HF367N
HF368N
666.00
777.00
1426.00
2022.00
5300.00
8955.00
15665.00
19563.00
005
005
015
015
025
050
100
100
150
150
200
200
015
015
030
030
060
125
250
250
400
400
500
500
03
03
10
10
15
30
—
—
—
—
—
—
10
10
25
25
40
50
—
—
—
—
—
—
0071⁄2
0071⁄2
015
015
030
060
125
125
200
200
250
250
020
020
050
050
075
150
350
350
500
500
500
500
05
05
10
10
20
40
50
50
50
50
50
50
—
—
30
30
50
50
—
—
—
—
—
—
480 Volt AC/600 Volt AC/250 Volt DC
3-Pole, 3-Fuse and Solid Neutral
0030
0060
0100
0200
0400
0600
0800
1200
—
—
—
—
—
480 Volt AC/600 Volt AC/250 Volt DC
3-Pole, 3-Fuse
0030
0030
0060
0060
0100
0200
0400
0400
0600
0600
0800
1200
—
—
—
—
—
014
019
025
049
158
161
375
395
1
005
015
025
050
100
150
250
250
015
030
060
125
250
400
500
500
03
10
15
30
—
—
—
—
10
25
40
50
—
—
—
—
0071⁄2
015
030
060
125
200
250
250
020
050
075
150
350
500
500
500
05
10
20
40
50
50
50
50
—
30
50
50
—
—
—
—
600 Volt Fusible (For 2-Pole Applications use outside poles of 3-Pole Switches)
2-Pole, 2-Fuse
0030
0060
0100
0400
0600
480 Volt AC/600 Volt AC/600 Volt DC
Type 4/4X Stainless
HF261S
2638.00
HF262S
2792.00
HF263S■ 5613.00
HF265S■ 15870.00
HF266S■ 22680.00
015
020
027
153
156
Type 12 Industrial
HF261J■
984.00
991.00
HF262J■
HF263J■
1547.00
HF265J■
5357.00
HF266J■
8768.00
015
020
027
155
156
03
05
10
—
—
071⁄2
20
30
50
50
—
—
—
—
—
03
10
15
50
50
10
25
40
—
—
—
—
—
—
—
—
—
—
—
—
05
10
20
40
50
15
30
50
50
50
480 Volt AC/600 Volt AC/250 Volt DC
3-Pole, 3-Fuse
0030
0060
0100
0200
0400
0600
0800
01200
—
—
—
—
—
HF361S
HF362S
HF363S
HF364S
HF365S
HF366S
HF367S
HF368S■
2681.00
2875.00
5627.00
7997.00
16468.00
24310.00
31062.00
36846.00
013
020
025
049
158
161
370
388
■ Built to order. Allow 2–3 weeks for delivery.
* In pounds (lbs).
60-200A 3-Pole switches are also rated 600V DC.
Height reduced switch (45.25 rather than 56 inches in
height) for use with 500MCM or smaller conductors.
Use 3-Pole switch for 200A applications.
Discount Schedule HDSS
HF361J
HF362J
HF363J
HF364J
HF365J
HF366J
HF367J ■
HF368J ■
1001.00
1104.00
1791.00
2507.00
5631.00
10233.00
17430.00
22352.00
014
020
025
049
160
161
365
388
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Dual horsepower ratings: Std.- applies when non-time
delay fuses are installed. Max.- applies when timedelay fuses are installed.
Suitable for use as service entrance equipment except for
1200 when used on 480 or 600V grounded wye system.
Also rated Type 3S/3R.
005
015
025
050
100
150
200
250
015
030
060
125
250
400
500
500
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0071⁄2
015
030
060
125
200
250
250
020
050
075
150
350
500
500
500
05
10
20
40
50
50
50
50
—
30
50
50
—
—
—
—
Indicates oversized enclosure (30A switch with 60A
lugs in a 60A enclosure or 60A switch with 100A lugs
in a 100A enclosure).
600V DC & 600V DC horsepower rating shown
requires (2) poles to be connected in series.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-11
SAFETY
SWITCHES
System
Ampere
Rating
Outdoor — Type 3R
3
Indoor — Type 1
Heavy Duty Safety Switches
SAFETY
SWITCHES
3
Selection
Indoor - Type 1
System
Ampere Catalog
Rating Number
Ship.
Wgt.
Outdoor - Type 3R
List
Catalog
Price $ Number
Horsepower Ratings
Ship. List
Wgt. Price $
240 Volt
480 Volt
1-Phase 3-Phase 1-Phase
600 Volt
250V
3-Phase 1-Phase 3-Phase DC
600V
DC
600 Volt Non-Fusible
2-Pole
480 Volt AC / 600 Volt AC / 600 Volt DC
30
60
100
400
600
HNF261
HNF262
HNF263
HNF265■
HNF266■
12 299.00 HNF261R
19 532.00 HNF262R
24 823.00 HNF263R
109 2893.00 HNF265R
111 5102.00 HNF266R■
HNF361
—
HNF362H
HNF362
—
HNF363
HNF364
HNF365
HNF366
HNF367
HNF368
12
—
11
18
—
23
46
114
116
295
305
13
20
25
113
115
532.00
930.00
1323.00
4075.00
8134.00
—
—
—
15
15
—
—
—
—
—
7 1/2
20
30
50
50
13
19
11
19
24
24
47
118
120
295
307
532.00
900.00
923.00
936.00
1301.00
1338.00
1616.00
4107.00
8147.00
14209.00
18567.00
5
5
10
10
10
15
15
15
15
15
15
10
10
20
20
20
40
60
125
200
250
250
7 1/2
7 1/2
20
20
20
30
50
50
50
50
50
3-Pole
—
—
—
—
—
10
25
40
50
50
—
—
—
—
—
5
10
20
40
50
15
30
50
50
50
480 Volt AC / 600 Volt AC / 250 Volt DC
30
30
60
60
60
100
200
400
600
800
1200
299.00
—
523.00
532.00
—
864.00
1314.00
3068.00
5467.00
10779.00
14642.00
HNF361R
HNF361RL
HNF362RH
HNF362R
HNF362RL
HNF363R
HNF364R
HNF365R
HNF366R
HNF367R
HNF368R
20
20
50
50
50
75
125
250
400
500
500
10
10
20
25
25
40
50
50
50
50
50
30
30
40
60
60
100
150
350
500
500
500
5
5
10
10
10
20
40
50
50
50
50
—
—
—
30
30
50
50
—
—
—
—
600 Volt Non-Fusible
2-Pole
480 Volt AC / 600 Volt AC / 600 Volt DC
30
60
100
400
600
Type 4 / 4X Stainless
HNF261S
13 2153.00
HNF262S
20 2521.00
HNF263S■
25 5137.00
HNF265S■ 113 13612.00
HNF266S■ 115 19606.00
Type 12 Industrial
HNF261J
13
641.00
HNF262J
20
806.00
HNF263J■
25
1153.00
HNF265J■
114
3902.00
HNF266J■
120
6557.00
—
—
—
15
15
—
—
—
—
—
7 1/2
20
30
50
50
HNF361S
HNF362SH
HNF362S
HNF363S
HNF364S
HNF365S
HNF366S
HNF367S
HNF368S■
HNF361J
HNF362JH
HNF362J
HNF363J
HNF364J
HNF365J
HNF366J
HNF367J ■
HNF368J■
5
10
10
15
15
15
15
15
15
10
20
20
40
60
125
200
250
250
7 1/2
20
20
30
50
50
50
50
50
3-Pole
10
25
40
—
—
—
—
—
—
—
5
10
20
40
50
15
30
50
50
50
480 Volt AC / 600 Volt AC / 250 Volt DC
30
60
60
100
200
400
600
800
1200
13
15
19
24
47
118
120
295
310
2186.00
2537.00
2563.00
5198.00
7078.00
14729.00
21589.00
30951.00
34305.00
■ Built to order. Allow 2–3 weeks for delivery.
Also rated 600V DC.
Compact switch (11.1"H, 6.6"W box less cover and handle).
Short circuit withstand rating—100,000 RMS sym. amps.
3-12
—
—
—
—
—
13
14
19
24
47
119
120
295
310
670.00
930.00
946.00
1338.00
1692.00
4152.00
8150.00
14224.00
18684.00
Use
3-Pole switch for 200A application.
for use as service entrance equipment except for
1200 when used on a 480 or 600V grounded wye system.
Also rated type 3S / 3R.
Suitable
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
20
50
50
75
125
250
400
500
500
10
20
25
40
50
50
50
50
50
30
40
60
100
150
350
500
500
500
5
10
10
20
40
50
50
50
50
—
—
30
50
50
50
50
50
50
Indicates
oversized enclosure (30A switch in a 60A
enclosure or a 60A switch in a 100A enclosure.
600V DC and 600V DC horsepower rating shown
requires (2) poles to be connected in series.
Discount Schedule HDSS
Heavy Duty Safety Switches
Type 4/4X & 12 with Viewing Window
Selection
30–600A, 3-pole 600V max. in fusible and
non-fusible versions in Type 4/4X stainless
steel and Type 12 enclosures.
All allow viewing of visible blade position.
30–200A also allow viewing of indicating
type fuses.
▪ Rugged installer-friendly enclosure
design features a gasket flange with
continuously welded seams
▪ Tool-free cover latches
▪ Two, three and four point mounting
▪ Metal handle with large insulating grip
features a positive stop in both ON and
OFF position
▪ Ground lugs provided as standard
▪ Type 12 enclosures are fabricated from
galvanized steel and are also rated for
3R/3S outdoor applications
▪ Type 4X stainless steel switches
(30–200A) are provided with stainless
steel interior parts
▪ The widest range of accessories
available including 200% neutrals,
gold plated PLC auxiliary contacts
and isolated ground kits
SAFETY
SWITCHES
Features
3
Description
Maximum Horsepower Ratings
System
Ampere Catalog
Rating Number
List
Price $
Ship.
Weight
240V AC
1-Phase, 2-Wire
480V AC
3-Phase, 3-Wire
3-Phase, 3-Wire
3-Pole, 3-Wire Fusible, Type 12
30
60
100
200
400
600
HF361JW
HF362JW
HF363JW
HF364JW
HF365JW
HF366JW
1146.00
1169.00
1945.00
2661.00
5867.00
13063.00
HNF361JW
HNF362JW
HNF363JW
HNF364JW
HNF365JW
816.00
1093.00
1489.00
1842.00
4299.00
17
22
26
53
166
168
3
10
15
—
—
—
7 1/2
15
30
60
125
200
15
30
60
125
250
400
HF361SW
HF362SW
HF363SW
HF364SW
HF365SW
2828.00
3030.00
5782.00
8171.00
20138.00
14
21
25
51
133
3
10
15
15
15
10
20
40
60
125
20
50
75
125
250
HNF361SW 2333.00
HNF362SW 2720.00
HNF363SW 5349.00
HNF364SW 7228.00
HNF365SW 15917.00
In
pounds (lbs).
switches are also rated 600V DC.
HP ratings listed apply only when time delay
fuses are used.
Also rated 3S/3R for outdoor use.
200A
Maximum
Discount Schedule HDSS
DC
20
50
75
150
350
500
5
10
20
40
50
50
—
30
50
50
—
—
17
23
28
55
168
3
10
15
—
15
15
23
27
54
134
30
60
100
150
350
5
10
20
40
50
—
30
50
50
—
600 Volt AC / 250 Volt DC
7 1/2
15
30
60
125
15
30
60
125
250
3-Pole, 3-Wire Non-Fusible, Type 4X Stainless Steel
30
60
100
200
400
600V
DC
600 Volt AC / 250 Volt DC
3-Pole, 3-Wire Fusible, Type 4X Stainless Steel
30
60
100
200
400
250V
600 Volt AC / 250 Volt DC
3-Pole, 3-Wire Non-Fusible, Type 12
30
60
100
200
400
600V AC
3-Phase, 3-Wire
20
50
75
150
350
5
10
20
40
50
—
30
50
50
—
600 Volt AC / 250 Volt DC
3
10
15
15
15
10
20
40
60
125
20
50
75
125
250
30
60
100
150
350
5
10
20
40
50
—
30
50
50
—
All
switches are suitable for use as service entrance
equipment. Use outside poles of 3-pole switch for 2-pole
application.
600V DC and 600V DC horsepower rating shown
requires (2) poles to be connected in series.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-13
Heavy Duty Safety Switches
SAFETY
SWITCHES
3
Type VBII 4 & 6-Pole Heavy Duty Safety Switches
Selection
Application
Standards
4 & 6-pole Switches are commonly
used as a disconnecting means for
two-speed, two-winding motors.
Fused switches provide both over
current and short circuit protection.
Non-fusible switches normally provide
a local disconnection means for twospeed motors which are remote from
their motor controller. 4-pole switches
are also used in 3-phase, 4-wire circuits
when a switching neutral is required.
All 4 & 6-pole switches are service
entrance rated.
▪ UL & CUL listed under file #E4776
▪ Meets UL98 for enclosed switches
▪ 4 & 6-Pole switches are suitable for
use as service entrance
▪ Meets NEMA Standard KS-1 for
enclosed switches
▪ Meets NEC wire bending space
requirements
Description
4 & 6-pole switches are available in
30-200A ratings and in both fusible and
non-fusible versions. 4-pole switches are
supplied with either Type 1 or Type12/3R
enclosures.
6-pole switches are available with either
Type 12/3R or Type 4X stainless steel
enclosures.
Features
▪ Visible blade, double break switching
action
▪ Highly visible ON/OFF indication
▪ Defeatable dual cover interlock
▪ Padlock option in OFF position
햲
▪ All copper current carrying parts
▪ Tangenital knockouts (Type 1,
4-pole switches)
HNF663S
4-Pole Type VBII Switches햲 햳햶
System
Indoor Type 1
Amp
Catalog List
Rating Number Price $
햴
Type 12/3R Industrial
Ship Wt. Catalog
List
Ship Wt.
(lbs.)
Number
Price $ (lbs.)
Horsepower Ratings
240V, 2Ø, 4W
240V 3Ø
Std.
Max.
Std.
Max.
480V, 3Ø
Std.
Max.
600V, 3Ø
250V
Std.
Max. DC
Fusible 600 Volt AC, 250 Volt DC — 4-Pole, 4 Fuse햵
30
60
100
200
HF461
HF462
HF463
HF464■
926.00
1082.00
1786.00
2939.00
36
40
43
88
HF461J
HF462J
HF463J
HF464J■
1198.00
1321.00
2045.00
3419.00
36
40
43
88
3
71⁄2
15
25
10
20
30
50
3
71⁄2
15
25
71⁄2
15
30
60
5
15
25
50
15
30
60
125
71⁄2
15
30
60
20
50
75
150
5
10
20
40
32
34
36
78
—
—
—
—
10
20
30
50
—
—
—
—
10
20
40
60
—
—
—
—
20
50
75
125
—
—
—
—
30
60
100
150
5
10
20
40
Non-fusible 600 Volt AC, 250 Volt DC — 4-Pole
30
60
100
200
HNF461
HNF462
HNF463■
HNF464■
881.00
926.00
1716.00
2492.00
32
34
36
78
HNF461J 964.00
HNF462J 1128.00
HNF463J■ 1962.00
HNF464J■ 2964.00
6-Pole Type VBII Switches햲 햳햶
System
Type 12/3R Industrial
Type 4X Stainless Steel
Amp
Catalog
List
Ship Wt. Catalog
List
Ship Wt.
Rating Number
Price $
(lbs.) Number
Price $
(lbs.)
햴
Horsepower Ratings
240V 3Ø
480V, 3Ø
Std.
Max.
Std.
Max.
600V, 3Ø
Std.
Max.
250V
DC
Fusible 600 Volt AC, 250 Volt DC — 6-Pole, 6 Fuse햵
30
60
100
200
HF661J
HF662J
HF663J■
HF664J■
3594.00
4324.00
5194.00
9599.00
37
41
44
90
HF661S■
HF662S■
HF663S■
HF664S■
12437.00
13063.00
22191.00
30293.00
37
41
44
90
3
71⁄2
15
25
71⁄2
15
30
60
5
15
25
50
15
30
60
125
71⁄2
15
30
60
20
50
75
150
5
10
20
40
7422.00
8264.00
10120.00
18770.00
33
35
37
80
—
—
—
—
10
20
40
60
—
—
—
—
20
50
75
125
—
—
—
—
30
60
100
150
5
10
20
40
Non-fusible 600 Volt AC, 250 Volt DC — 6-Pole
30
60
100
200
HNF661J
HNF662J
HNF663J
HNF664J
3156.00
3723.00
4479.00
8155.00
33
35
37
80
■ Built to order. Allow 2–3 weeks for delivery.
HNF661S
HNF662S
HNF663S
HNF664S■
햴
햲
Lugs are aluminum alloy as standard. Optional copper body lugs are available.
햳 All 4 & 6-pole VBII switches are suitable for use as
service equipment when a neutral is installed or
equipment ground kit is properly connected.
3-14
햵
Dual horsepower ratings: Std. – applies when
non-time-delay fuses are installed. Max. – applies
when time delay fuses are installed.
Fusible switches accept Class H Fuses as the standard. Class R & J fuses can also be installed and
increase the rating from 10,000 to 200,000 AIC. For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햶
Class J, the load base is moved upward. For Class R
fuses, rejection kits are required.
Supplied with factory installed ground lugs.
Discount Schedule HDSS
Heavy Duty Safety Switches
Special Application Switches / Interlocked Receptacle Switches
Receptacle Safety Switches
provide cord connection protection
of heavy-duty portable equipment
(welders, infrared ovens, batch
feeders, portable conveyors, assembly
line fixtures and tools, refrigerator
trucks, etc.) under load or fault
conditions.
Type 12 and 4/4X Receptacle
Safety Switches are available
with 3-phase, 4-wire grounded type
Crouse-Hinds Arktite™ 2 receptacle,
or Pyle-National pre-wired and mounted
with interlock linkage to the switch
mechanism. Insertion or removal of
the plug is prevented by the interlock
linkage while the switch is in the “ON”
position. Receptacle prevents operation
of switch if incorrect plug is inserted.
Type 4/4X Switches are provided with
stainless steel interior parts.
All receptacle switches are 3-pole,
3-wire plus ground.
SAFETY
SWITCHES
Description 햲 햳
3
Application
Selection
Crouse-Hinds Interlocked Receptacle Switches
햷
Ampere
Rating햶
Type 12
Catalog
Number
햸
Type 4/4X
Catalog
Number
List
Price $
Shipping
Weight
Std. Pkg.햵
HF321SCH▲
HF322SCH▲
HF323SCH▲
7116.00
7437.00
12067.00
23
30
36
APJ3485 & NPJ3485
APJ6485 & NPJ6485
APJ10487 & NPJ10487
HF361SCH
HF362SCH
HF363SCH▲
7437.00
7655.00
12803.00
24
30
36
APJ3485 & NPJ3485
APJ6485 & NPJ6485
APJ10487 & NPJ10487
HNF361SCH▲
HNF362SCH
HNF363SCH▲
6857.00
6922.00
11787.00
22
29
35
APJ3485 & NPJ3485
APJ6485 & NPJ6485
APJ10487 & NPJ10487
24
30
36
APJ3485 & NPJ3485
APJ6485 & NPJ6485
APJ10487 & NPJ10487
22
29
35
APJ3485 & NPJ3485
APJ6485 & NPJ6485
APJ10487 & NPJ10487
List
Price $
Accepts Crouse-Hinds
Arktite 햲 Plug
Catalog Number
240V Fusible, 3-Pole, 3-Wire
30
60
100
HF321JCH
HF322JCH
HF323JCH
2365.00
2440.00
3161.00
600V Fusible, 3-Pole, 3-Wire
30
60
100
HF361JCH
HF362JCH
HF363JCH
2449.00
2588.00
3392.00
600V Non-Fusible, 3-Pole, 3-Wire
30
60
100
HNF361JCH▲
HNF362JCH
HNF363JCH▲
2153.00
2440.00
2997.00
600V Fusible, 3-Pole, 3-Wire with Viewing Window
30
60
100
HF361JCHW▲
HF362JCHW
HF363JCHW▲
2597.00
2743.00
3547.00
HF361SCHW▲
HF362SCHW
HF363SCHW▲
7593.00
7810.00
12959.00
600V Non-Fusible, 3-Pole, 3-Wire with Viewing Window
30
60
100
HNF361JCHW▲
HNF362JCHW
HNF363JCHW▲
2301.00
2592.00
3151.00
HNF361SCHW▲
HNF362SCHW▲
HNF363SCHW▲
7005.00
7074.00
11944.00
Pyle-National Interlocked Receptacle Switches
3-Pole, 3-Wire Plus Ground Fusible and Non-Fusible
Type 12
Ampere Rating
Voltage Catalog
Switch Receptacle Rating
Number 햷
30
30
600 (F)
HF361JPN▲
600 (N-F) HNF361JPN
60
60
240 (F)
HF322JPN▲ 2440.00 —
600 (F)
HF362JPN▲ 2588.00 HF362SPN▲
600 (N-F) HNF362JPN 2440.00 HNF362SPN
▲ Built to order. Allow 6–8 weeks for delivery.
햲
Type 12
Stainless Steel
List
Catalog
Price $ Number 햸
2449.00 HF361SPN▲
2153.00 HNF361SPN
Arktite™ is a registered trademark of the CrouseHinds Company. Plugs are not sold or supplied by
Siemens.
Discount Schedule HDSS
햳
햴
햵
Shipping Accepts Pyle-National
List
Weight
QuelArc™ 햳햴 Plugs
Price $ Std. Pkg.햵 Plug Catalog Number
7437.00
23
JPD-83046
6857.00
21
—
7655.00
6922.00
28
28
27
JPD-116046
Indicates plug with maximum diameter cable bushing.
QuelArc™ is a registered trademark of the PyleNational Company.
In pounds (lbs.).
햶
햷
햸
Ampere rating of both switch and receptacle.
Also rated Type 3R/3S.
Enclosure is constructed of Type 304 stainless steel.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-15
Heavy Duty
Special Application Safety Switches / Type VBII Non-Metallic
Application
reinforced enclosure allows a wide
range of operating temperatures and
is supplied with a continuous memory
retaining gasket for a superior seal
against entry of water, dust and other
contaminants. The excellent insulating
properties of fiberglass virtually
eliminate problems caused by
internal condensation.
Siemens Non-Metallic Safety Switches
have fiberglass reinforced polyester
enclosures which are extremely
resistant to a wide range of corrosive
atmospheres which can be
encountered in waste water
treatment plants and certain
industrial applications.
All switches are load break rated and
are provided with an equipment ground
kit as standard. Class R fuse clip kits
and auxiliary switch kits are also
available.
SAFETY
SWITCHES
3
Description
30-200A, 600V Max, fusible and nonfusible switches are available in Type
4X enclosures. The fiberglass
System
Ampere Catalog
Rating Number
Selection
Horsepower Rating—3-Phase
Ship
Weight
240 Volt AC 480 Volt AC 600 Volt AC 250 600
Std.pkg. List
Volts Volts
(lbs.)
Price $ Std. Max. Std. Max. Std. Max. DC
DC
3-Pole, 4-Wire, 240 Volt Fusible, Type 4X
030
HF321NX
21
3320.00
3
071⁄2
—
0—
—
0—
05
—
060
HF322NX▲
22
3595.00
71⁄2
15
—
0—
—
0—
10
—
3-Pole, 4-Wire, 600 Volt AC Fusible, Type 4X
Non-Metallic Features
▪ 30, 60, 100 and 200
Ampere Switches
▪ 600 Volts Fusible
▪ 600 Volts Non-Fusible
▪ Rated 10,000 AIC with
Class H Fuses
▪ Rated 200,000 AIC with
Class J or R Fuses
030
HF361NX
21
3693.00
03
071⁄2
05
015
071⁄2
020
05
15
060
HF362NX
22
4046.00
071⁄2
15
15
030
15
050
10
30
100
HF363NX▲
39
7795.00
15
30
25
060
30
075
20
50
200
HF364NX▲
83
9917.00
25
60
50
125
60
150
40
50
▪ UL-Listed under File E4776
▪ Horsepower Rated
▪ Suitable for use as
Service Equipment
3-Pole, 3-Wire, 600 AC Volt Non-Fusible, Type 4X
030
HNF361X
20
3127.00
—
071⁄2
—
020
—
030
05
15
060
HNF362X
20
3509.00
—
15
—
050
—
060
10
30
10100
HNF363X▲
38
6734.00
—
30
—
075
—
100
20
50
200
HNF364X▲
81
9509.00
—
60
—
125
—
150
40
50
▪ Quick-make, quick-break
mechanism
▪ Visible Blade Construction
▪ Padlock-off handle feature
▪ Field Installable Auxiliary Contacts
▪ Field Replaceable Line and
Load Bases
▪ Factory Installed Ground Lug
Supplied as Standard
▲ Built to order. Allow 6–8 weeks for delivery.
Also used for 240 volt applications.
Add “L” to end of catalog number for switches less
line & load lugs with mounting hardware for crimp
type or copper body lugs.
200A switches are also rated 600V DC max.
600V DC and 600V DC horsepower rating shown
requires (2) poles to be connected in series.
▪ Line Terminal Shields
▪ Neutrals Installed as Standard
on Fusible Switches
3-16
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule HDSS
General and Heavy Duty Safety Switches
Accessories
Selection
HT63
HR612
HN612
All General Duty and Heavy Duty Switches
are field convertible to accept Class R
Fuse Clip Kits. The kits prevent the
installation of Class H and K fuses
(one kit required per 3-pole switch).
Class R Fuse Clip Kits
All 100-600A, General Duty and 1001200A Heavy Duty Switches are field
convertible to accept Class T fuses.
400-600A switches are field convertible
to accept Class T fuses by moving the
load base to a pre-drilled
T fuse position.
Catalog
Number
List
Price $
Class T Fuse Adapter Kits햲
GSRK321
25.50
30A, 240V Kit (GD only)
HR21
83.00
30A, 240V Kit (HD only)
Catalog
Number
HR612
83.00
30A, 600V Kit/60A, 240V Kit
HT23
76.00
100A, 240V Kit
HR62
83.00
60A, 600V Kit
HT63
120.00
100A, 600V Kit
HR63
54.00
100A Kit
HT24
102.00
200A, 240V Kit
HR64
54.00
200A Kit
HT64▲
143.00
200A, 600V Kit
HR656
137.00
400A/600A Kit
TFAK72
214.00
800A, 240V Kit
TFAK75
238.00
800A, 600V Kit
TFAK82
543.00
1200A, 240V Kit
Description
Class J Fusing
All 30-600A, 600V and 100-600A,240V
fusible Heavy Duty Switches are field
convertible to accept Class J fuses by
moving the load base to a pre-drilled J
fuse position. All 100-600A, 240V
fusible General Duty switches can also
be field converted to accept Class J
fuses.
List
Price $
SAFETY
SWITCHES
Class T Fuse Adapter Kits
3
Class R Fuse Clip Kits
Description
HN264
200% Neutral Kits
Neutral Kits
Standard Neutral Kits can be field
installed in General and Heavy Duty
Switches.
UL listed 200% Neutrals are available
on 100-600A Heavy Duty Switches.
They are typically used with non-linear
transformers or where increased neutral
ampacity/lug capacity is required.
200% Neutral Kits
Neutral Kits
Switch
Ampere Rating
30 GD
Kit Catalog
Number
W410190
30 HD, 60 GD
HN612
97.00
60, 100 HD, 100 GD
HN623
186.00
200
HN64
186.00
400 & 600
HN656
436.00
800 & 1200
HN678
838.00
List Price $
71.00
Switch
Ampere
Rating
100
Kit
Catalog List
Number Price $
HN263
225.00
Wire Range
Line & Load
Lugs (Cu/Al)
(2) #14-1/0 AWG
200
HN264
352.00 (2) #6 AWG-300 Kcmil
400
HN656
(2) 1/0 AWG-750 Kcmil
436.00 or (4) 1/0 AWG-250 Kcmil
600
HN678
838.00 (4) 1/0 AWG-750 Kcmil
▲ Built to order. Allow 6–8 weeks for delivery.
햲
One kit per pole required.
Discount Schedule HDSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-17
General and Heavy Duty Safety Switches
SAFETY
SWITCHES
3
Accessories
Selection
HA261234
HA161234
Auxiliary Contacts
Auxiliary Contacts are available only for Heavy Duty Switches. The auxiliary
contacts are available in 1 normally open and 1 normally closed or 2 normally
open and 2 normally closed configurations. Siemens offers a PLC Auxiliary
Switch (30-200A) that has very low resistance for low voltage and current
typical in PLC circuits. All auxiliary contacts make after and break before
main switch contacts.
Auxiliary Contacts
Switch
Ampere
Rating
Aux. Switch
Catalog
List
Number
Price $
Kit Ampere Rating
125V AC
Max.
250V AC
Max.
Kit Horsepower Rating
28V DC 125V AC
Max.
Max.
250V AC
Max.
28V DC
Max.
With 1 NO & 1 NC Isolated Contacts
30-200
HA161234
239.00
10
10
—
1/2
3/4
—
400-1200
HA165678
587.00
10
10
—
1/2
3/4
—
With 2 NO & 2 NC Isolated Contacts
30-200
HA261234
266.00
10
10
7
1/2
3/4
—
400-1200
HA265678
614.00
10
10
7
1/2
3/4
—
Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts
30-200
HA361234
302.00
10
10
—
1/2
3/4
—
400-1200
HA365678
643.00
10
10
—
1/2
3/4
—
Fuse Puller Kits
Fuse Puller Kits
Fuse Puller Kits are field installable in
30-100A Type VBII Heavy Duty Switches
(one kit required per 3-pole switch).
Switch
Ampere
Rating
030
Fuse Puller Kit
Catalog Number
HP61
List Price $
21.00
060
HP62▲
21.00
100
HP63▲
21.00
HP61
▲ Built to order. Allow 6–8 weeks for delivery.
3-18
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule HDSS
General and Heavy Duty Safety Switches
Accessories
Selection
Copper Lug Kits
Heavy duty switches are UL approved to accept
field installed copper lug kits.
Copper Lug Kits
Switch
Ampere
Rating
30–60
Copper Lug
Catalog
List
Number
Price $ Description
HLC612
138.00 (9) Lugs/Kit #14-4 AWG Cu
100
HLC63▲
172.00 (9) Lugs/Kit #14-1/0 AWG Cu
200
HLC64▲
212.00 (9) Lugs/Kit #6 AWG-300 Kcmil Cu
400–1200 HLC65678
HLC612
37.50 (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu
3
Equipment Ground Kits
SAFETY
SWITCHES
Equipment Ground Lug Kits are available for all General
and Heavy Duty Switches. They are field installable in
Type 1 and Type 3R Switches and are factory installed
as standard in Type 4 / 4X and Type 12 and also in all
VBII 4&6-pole Switches.
Equipment Ground Kits
Switch
Ampere
Rating
30A GD
Catalog
Number
GSGK60
List
Price $
24.00
Number of
Terminals
2
Wire Range
Per Terminal (Cu/Al)
#14-8 AWG
60–200 GD
HG61234
24.00
2
#14-4 AWG
30–200 HD
HG61234
24.00
2
#14-4 AWG
400 & 600
HG656
123.00
4
#14-2/0 AWG
800–1200
HG678
239.00
8
#6 AWG-250 Kcmil
HG261234
Isolated Ground Kits
Isolated Ground Kits are available on 30-600A Heavy Duty
Switches. They are normally used on circuits with a high
content of computer or other electronic loading which
require a ground which is isolated from the building
ground and neutral circuits. The kit includes both
isolated and grounded terminals as listed below.
Isolated Ground Kits
Switch
Ampere
Rating
30–200
Catalog
Number
HG261234
List
Price $
51.00
Number of Terminals
Isolated
Grounded
2
2
Wire Range
Per Terminal (Cu/Al)
#14-4 AWG
400–600
HG2656
156.00
4
#14-2/0 AWG
4
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule HDSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-19
General and Heavy Duty
Hub and Lug Data
Selection
SSH150
ECHV300
SAFETY
SWITCHES
3
Interchangeable Hubs
Conduit hubs are available for Type 3R,
12 and 4 / 4X applications. 30-200A
Type 3R Switches are provided with a
conduit hub provision and a removable
hub plate on their top rainshed.
Hubs
Conduit
Size
(inches)
Catalog
Number
List
Price $
Used On
Type 3R 햲
3/4
1
1 1/4
ECHA075
ECHA100
ECHA125
36.50
36.50
36.50
Cover
3/4
1
1 1/4
1 1/2
2
2 1/2
ECHS000
ECHS075
ECHS100
ECHS125
ECHS150
ECHS200
ECHS250
38.00
39.50
39.50
39.50
39.50
69.00
109.00
2 1/2
3
3 1/2
4
ECHV250
ECHV300
ECHV350
ECHV400
125.00
182.00
274.00
362.00
30A GD Only
60–200A GD
30–200A HD
SSH075
SSH100
SSH125
SSH150
SSH200
All Heavy Duty Switches are field
convertible for (Crimp) type lugs.
When compression lugs are required for
30-100A switches, a neutral barrier kit is
required for 1-Phase, 3W or 3-Phase, 4W
applications. When compression lugs are
required on 400-1200A switches, lug
mounting kits are required.
Compression Lug Mounting 햴
and Neutral Barrier Kits
Switch
Ampere Catalog
Rating Number
30
HCL612
List
Price $ Kit Description
6.40 Neutral Barrier Kit
60 & 100 HCL623
9.70 Neutral Barrier Kit
HCL65
1-Pole, Compression
19.00 Lug Mounting Kit
HCL65678■
1-Pole, Compression
22.50 Lug Mounting Kit
800
& 1200 햶 HCL65678■
1-Pole, Compression
22.50 Lug Mounting Kit
햵
400
& 600 햶
Lugs
Type 4/4X햳
3/4
1
1 1/4
1 1/2
2
Compression Lug Mounting &
Neutral Barrier Kit
400
400–1200A
46.00
70.00
74.00
102.00
139.00
30–200A
Note: 30 thru 200A. Type 3R Switches have
removable hub plates on rainshed. 400A and
larger Type 3R Switches have no provisions for
mounting hubs. Drill or punch hole in the field to
accommodate hub size desired.
30 & 60A Switches are suitable for use
with 60° or 75°C wire. 100–1200A are
suitable for use with 75°C rated wire.
Switch
Ampere
Rating
30GD
햲
Hubs suitable for 3R Switches.
Also suitable for Type 12 applications.
Neutral Barrier kits are required on 30-100A switch only
and only with 1-Phase / 3W or 3-Phase / 4W loads.
Compression Lugs mounting kits are required on 4001200A switches only.
햵 Provides mounting for a single line or load lug.
햶 Provides mounting for (2) compression lugs per phase
on line or load.
SL0420
Multiple Padlock Accessory
A tamper-proof device to provide for
multiple padlocking to meet OSHA or
plant requirements. Accepts up to 6
padlocks. Catalog number SL0420.
Standard Carton-12. List Price $74.00.
Kirk-Key Interlocks
Kirk-Key Interlocks can be factoryinstalled only on Type VBII Heavy Duty
and Double Throw Safety Switches.
Interlocks are used to prevent the
operator from making an unauthorized
operation. The interlock system is a
simple method of applying key interlocks to safety switches so as to
require operation in a predetermined
sequence. List Price $1675.00.
Before consulting the factory, the
following information is required:
▪ User name and address
▪ Key number from lock assemblies
on any existing locks to be
interlocked with
▪ Complete locking scheme
Consult factory for delivery.
Wire Ranges (Line, Load and Standard Neutral)
햴
Lug Wire Range
#14-8 AWG (Cu/AI)햷
#14-8 AWG (Cu/Al)
#14-6 AWG (Cu/AI)
#14-2 AWG (Cu/Al)
60햹햻
#14-3 AWG (Cu/AI)
#14-2 AWG (Cu/Al)
100햽
#14-1/0 AWG (Cu/Al)
#14-1/0 AWG (Cu/Al)
200햺
#6 AWG-250 Kcmil (Cu/Al)
#6 AWG-300 Kcmil (Cu/Al)
400햸
1/0 AWG-750 Kcmil (Cu/Al) or
(2) 1/0 AWG-250 Kcmil (Cu/Al)
(1) 1/0 AWG-750 Kcmil (Cu/Al) or
(2) 1/0 AWG-250 Kcmil (Cu/Al)
600햸
(2) 1/0 AWG-750 Kcmil (Cu/Al) or
(4) 1/0 -250 Kcmil (Cu/Al)
(2) 1/0 AWG-750 Kcmil (Cu/Al) or
(4) 1/0 AWG-250 Kcmil (Cu/Al)
800
(3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load or
(6) 1/0 AWG-250 Kcmil (Cu/Al)
(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral
(3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load or
(6) 1/0 AWG-250 Kcmil (Cu/Al)
(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral
(4) 3/0 AWG-750 Kcmil (Cu/Al) Line Load
(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral
(4) 1/0 AWG-750 Kcmil (Cu/Al) Line Load
(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral
1200
햳
Wire Range with
Wire Bending Space
Per NEC Requirements
30HD
■ Built to order. Allow 2-3 weeks for delivery.
3-20
ECHS200
햷
Line lugs are UL approved to accept #14-6 CU/Al cable.
Max. wire size for height reduced switches is 500 kcmil
(Cu/Al).
햹 All but 60A GD & Compact HD NF switches are also UL
approved for #2 Cu/Al conductors.
햸
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햺
All 200A Heavy Duty Switches have a wire range
& wire bending space for (1) #6-300 Kcmil (Cu/Al).
Also for 30A oversized heavy duty switches.
햽 Also for 60A oversized heavy duty switches.
햻
Discount Schedule HDSS & RESI
General and Heavy Duty Safety Switches
Dimensions
Safety Switch Dimensions (Inches)* & Shipping Weights
Height
Width
Catalog
Number
Box
A
GF221N
GF221NR
GF222N
GF222NR
GF223N
7.97
8.07
14.26
14.39
21.95
8.13
—
15.45
—
23.15
—
8.16
—
15.76
—
5.50
5.16
6.64
6.64
9.64
5.94
5.94
8.70
8.70
11.70
3.00
3.13
5.05
5.05
5.05
5.88
5.88
8.63
8.63
8.63
S1
S3
S6
S8
S10
GF223NR
GF224N
GF224NR
GF225N
GF225NH
GF225NR
GF225NRH
21.95
29.90
29.90
56.00
45.25
56.07
45.31
—
31.07
—
56.57
45.82
—
—
23.46
—
31.42
—
—
57.19
46.44
9.64
14.62
14.61
24.65
24.65
24.65
24.65
11.67
16.68
16.68
26.21
26.21
26.70
26.70
5.05
6.36
6.36
9.23
9.23
9.23
9.23
8.70
10.92
10.92
14.68
14.68
14.68
14.68
S11
S12
S13
S14
S14
S15
S15
24
47
48
153
128
157
130
GF226N
GF226NH
GF226NR
GF226NRH
GF321N
GF321NR
GF322N
56.00
45.25
56.07
45.31
7.97
8.07
14.26
56.57
45.82
—
—
8.19
—
15.45
—
—
57.19
46.44
—
8.16
—
24.64
24.65
24.64
24.65
7.19
7.19
6.64
26.21
26.21
26.70
26.70
7.69
8.16
8.70
9.23
9.23
9.23
9.23
3.00
3.13
5.05
14.68
14.68
14.68
14.68
5.88
5.88
8.63
S14
S14
S15
S15
S2
S4
S6
155
133
159
135
24 (5)
24 (5)
15
GF322NR
GF323N
GF323NR
GF324N
GF324NR
14.39
21.95
21.95
29.90
29.90
—
23.15
—
31.07
—
15.76
—
23.46
—
31.42
6.64
9.64
9.64
14.62
14.61
8.70
11.70
11.67
16.68
16.68
5.05
5.05
5.05
6.36
6.36
8.63
8.63
8.70
10.92
10.92
S8
S10
S11
S12
S13
GF325N
GF325NH
GF325NR
GF325NRH
GF326N
GF326NH
GF326NR
GF326NRH
GNF321
56.00
45.25
56.07
45.31
56.00
45.25
56.07
45.31
7.97
56.57
45.82
—
—
56.57
45.82
—
—
8.19
—
—
57.19
46.44
—
—
57.19
46.44
—
24.65
24.65
24.65
24.65
24.65
24.65
24.65
24.65
7.19
26.21
26.21
26.70
26.70
26.21
26.21
26.70
26.70
7.69
9.23
9.23
9.23
9.23
9.23
9.23
9.23
9.23
3.00
14.68
14.68
14.68
14.68
14.68
14.68
14.68
14.68
5.88
S14
S14
S15
S15
S14
S14
S15
S15
S2
158
136
162
138
161
138
165
141
24 (5)
GNF321R
GNF322
GNF322R
GNF323
GNF323R
8.07
11.11
11.11
21.95
21.95
—
12.31
—
23.15
—
8.16
—
12.62
—
23.46
7.19
6.64
6.64
9.64
9.64
7.69
8.71
8.71
11.70
11.67
3.13
5.05
5.05
5.05
5.05
5.88
8.61
8.61
8.63
8.70
S4
S7
S9
S10
S11
24 (5)
12
13
23
24
GNF324
GNF324R
GNF325
GNF326
HF221J
29.90
29.90
44.00
44.00
14.27
31.07
—
44.57
44.57
17.33
—
31.42
—
—
—
14.62
14.61
24.65
24.65
6.65
16.68
16.68
26.21
26.21
9.02
6.36
6.36
9.23
9.23
5.32
10.92
10.92
14.68
14.68
10.46
S12
S13
S14
S14
—
46
47
114
116
13
HF221N
HF221NR
HF221S
HF222J
HF222N
14.26
14.39
14.27
16.22
16.26
15.45
—
17.33
19.31
17.46
—
15.77
—
—
—
6.64
6.64
6.65
9.17
9.15
9.01
9.01
9.02
11.47
11.53
5.05
5.05
5.32
5.33
5.05
10.17
10.17
10.46
10.46
10.17
S6
S8
—
—
S16
12
13
13
19
18
HF222NR
HF222S
HF223J
HF223N
HF223NR
16.26
16.22
21.96
21.95
21.95
—
19.31
23.16
23.15
—
17.77
—
—
—
23.46
9.16
9.17
9.65
9.64
9.64
11.53
11.47
12.02
12.01
11.97
5.05
5.33
5.34
5.05
5.05
10.17
10.46
10.46
10.17
10.17
S17
—
—
S10
S11
19
19
24
23
24
Box
F
With
Handle
G
Knockout
Diagram
햲
Shipping
Weight
(lbs.)
35 (10)
35 (10)
14
14
23
SAFETY
SWITCHES
햲
Box
D
With
Handle
E
3
*For inches / millimeters conversion, multiply inches
by 25.4.
With
Rain Shed
C
Depth
With
Door
B
15
25
25
49
50
Knocks not provided on Type 4 / 4X and 12 or in 800 &
1200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-21
General and Heavy Duty Safety Switches
Dimensions
Safety Switch Dimensions (Inches)* & Shipping Weights
SAFETY
SWITCHES
3
Height
Width
Depth
Catalog
Number
Box
A
With
Door
B
With
Handle
G
Knockout
Diagram
HF223S
HF224J
HF224N
HF224NR
HF224S
21.96
29.96
29.90
29.90
29.96
23.16
31.07
31.07
—
31.07
—
—
—
31.42
—
9.65
14.62
14.62
14.61
14.62
12.02
16.95
16.98
16.99
16.95
5.34
6.63
6.36
6.36
6.63
10.46
12.58
12.33
12.33
12.58
—
—
S12
S13
—
24
48
47
48
48
HF225N
HF225NH
HF225NR
HF225NRH
HF226N
HF226NH
HF226NR
HF226NRH
56.00
45.25
56.07
45.31
56.00
45.25
56.07
45.31
56.57
45.82
—
—
56.57
45.82
—
—
—
—
57.19
46.44
—
—
57.19
46.44
24.65
24.65
24.65
24.65
24.65
24.65
24.65
24.65
26.21
26.21
26.70
26.70
26.21
26.21
26.70
26.70
9.23
9.23
9.23
9.23
9.23
9.23
9.23
9.23
14.68
14.68
14.68
14.68
14.68
14.68
14.68
14.68
S14
S14
S15
S15
S14
S14
S15
S15
153
129
162
131
155
133
159
135
HF227N
HF227NR
HF228N
HF228NR
66.25
66.25
66.25
66.25
66.82
—
66.82
—
—
67.36
—
67.36
38.40
38.40
38.40
38.40
39.96
39.96
39.96
39.96
9.24
9.24
9.24
9.24
14.68
14.68
14.68
14.68
—
—
—
—
360
362
362
364
HF265
HF265J
HF265R
HF265S
56.00
56.14
56.07
56.14
56.57
56.57
—
56.57
—
—
57.19
—
24.65
24.82
24.65
24.82
26.21
26.44
26.70
26.44
9.23
9.19
9.23
9.19
14.68
14.64
14.68
14.64
S14
—
S15
—
149
155
152
153
HF266
HF266J
HF266R
HF266S
56.00
56.14
56.07
56.14
56.57
56.57
—
56.57
—
—
57.19
—
24.65
24.82
24.65
24.82
26.21
26.44
26.70
26.44
9.23
9.19
9.23
9.19
14.68
14.68
14.68
14.68
S14
—
S15
—
155
156
155
161
HF321J
HF321N
HF321NR
HF321S
HF322J
HF322N
14.27
14.26
14.39
14.27
16.27
16.26
17.33
15.45
—
17.33
19.31
17.46
—
—
15.77
—
—
—
6.65
6.64
6.64
6.65
9.17
9.15
9.02
9.01
9.01
9.02
11.47
11.53
5.32
5.05
5.05
5.32
5.33
5.05
10.46
10.17
10.17
10.46
10.46
10.17
—
S6
S8
—
—
S16
14
14
15
14
20
19
HF322NR
HF322S
HF323J
HF323N
HF323NR
16.26
16.27
21.96
21.95
21.95
—
19.31
23.16
23.15
—
17.77
—
—
—
23.46
9.16
9.17
9.65
9.64
9.64
11.53
11.47
12.02
12.01
11.97
5.05
5.33
5.34
5.05
5.05
10.17
10.46
10.46
10.17
10.17
S17
—
—
S10
S11
20
20
25
25
26
HF323S
HF324J
HF324N
HF324NR
HF324S
21.96
29.96
29.90
29.90
21.96
23.16
31.07
31.07
—
31.07
—
—
—
31.42
—
9.65
14.62
14.62
14.61
14.62
12.02
16.95
16.98
16.99
16.95
5.34
6.63
6.36
6.36
6.63
10.46
12.58
12.33
12.33
12.58
—
—
S12
S13
—
25
49
49
50
49
HF325J
HF325N
HF325NH
HF325NR
HF325NRH
HF325S
HF326J
56.14
56.00
45.25
56.07
45.31
56.14
56.14
56.57
56.57
45.82
—
—
56.57
56.57
—
—
—
57.19
46.44
—
—
24.82
24.65
24.65
24.65
24.65
24.82
24.82
26.44
26.21
26.21
26.70
26.70
26.44
26.44
9.19
9.23
9.23
9.23
9.23
9.19
9.19
14.64
14.68
14.68
14.68
14.68
14.64
14.64
—
S14
S14
S15
S15
—
—
160
158
137
162
138
158
161
HF326N
HF326NH
HF326NR
HF326NRH
HF326S
HF327J
HF327N
56.00
45.25
56.07
45.31
56.14
66.25
66.25
56.57
45.82
—
—
56.57
66.82
66.82
—
—
57.19
46.44
—
—
—
24.64
24.65
24.64
24.65
24.82
38.40
38.40
26.21
26.21
26.70
26.70
26.44
39.96
39.96
9.23
9.23
9.23
9.23
9.19
9.24
9.24
14.68
14.68
14.68
14.68
14.64
14.68
14.68
S14
S14
S15
S15
—
—
—
161
139
165
142
161
367
380
HF327NR
HF327S
HF328N
HF328NR
HF361
HF361J, JW
66.25
66.25
66.25
66.25
14.26
14.27
—
66.82
66.82
—
15.45
17.33
67.36
—
—
67.36
—
—
38.40
38.40
38.40
38.40
6.64
6.65
40.25
39.96
39.96
40.25
9.01
9.02
9.24
9.24
9.24
9.24
5.05
5.32
14.68
14.68
14.68
14.68
10.17
10.46
—
—
—
—
S6
—
383
367
382
385
14
14
HF361L
HF361N
HF361NR
HF361R
HF361RL
HF361S, SW
HF362
16.26
14.26
14.39
14.39
16.26
14.27
16.26
17.46
15.45
—
—
—
17.33
17.46
—
—
15.77
15.77
17.77
—
—
9.15
6.64
6.64
6.64
9.16
6.65
9.15
11.53
9.01
9.01
9.01
11.53
9.02
11.53
5.05
5.05
5.05
5.05
5.05
5.32
5.05
10.17
10.17
10.17
10.17
10.17
10.46
10.17
S16
S6
S8
S8
S17
—
S16
19
14
15
15
20
15
19
*For inches / millimeters conversion, multiply inches
by 25.4.
3-22
With
Rain Shed
C
Box
D
With
Handle
E
햲
Box
F
Knocks not provided on Type 4 / 4X and 12 or in 800 &
1200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햲
Shipping
Weight
(lbs.)
General and Heavy Duty Safety Switches
Dimensions
Safety Switch Dimensions (Inches)* & Shipping Weights
Height
Width
With
Rain Shed
C
Depth
With
Handle
G
Knockout
Diagram
HF362J, JW
HF362N
HF362NR
HF362R
HF362RL
HF362S, SW
16.27
16.26
16.26
16.26
21.95
16.27
19.31
17.46
—
—
—
19.31
—
—
17.77
17.77
23.46
—
9.17
9.15
9.16
9.16
9.64
9.17
11.47
11.53
11.53
11.53
11.97
11.47
5.33
5.05
5.05
5.05
5.05
5.33
10.46
10.17
10.17
10.17
10.17
10.46
—
S16
S17
S17
S11
—
20
19
20
20
25
20
HF363
HF363J, JW
HF363N
HF363NR
HF363R
21.95
21.96
21.95
21.95
21.95
23.15
23.16
23.15
—
—
—
—
—
23.46
23.46
9.64
9.65
9.64
9.64
9.64
12.01
12.02
12.01
11.97
11.97
5.05
5.34
5.05
5.05
5.05
10.17
10.46
10.17
10.17
10.17
S10
—
S10
S11
S11
24
25
25
26
25
HF363S
HF364
HF364J, JW
HF364N
HF364NR
21.96
29.90
29.96
29.90
29.90
23.16
31.07
31.07
31.07
—
—
—
—
—
31.42
9.65
14.62
14.62
14.62
14.61
12.02
16.98
16.95
16.98
16.99
5.34
6.36
6.63
6.36
6.36
10.46
12.33
12.58
12.33
12.33
—
S12
—
S12
S13
25
48
49
49
48
HF364R
HF364S, SW
HF365
HF365H
HF365J, JW
HF365N
29.90
29.96
56.00
45.25
56.14
56.00
—
31.07
56.57
45.82
56.57
56.57
31.42
—
—
—
—
—
14.61
14.62
24.65
24.65
24.82
24.65
16.99
16.95
26.21
26.21
26.44
26.21
6.36
6.63
9.23
9.23
9.19
9.23
12.33
12.58
14.68
14.68
14.64
14.68
S13
—
S14
S14
—
S14
49
49
154
136
160
158
HF365NR
HF365R
HF365RH
HF365S, SW
HF366
HF366H
HF366J, JW
56.07
56.07
45.25
56.14
56.00
45.25
56.14
—
—
45.82
56.57
56.57
45.82
56.57
57.19
57.19
—
—
—
—
—
24.65
24.65
24.65
24.82
24.64
24.65
24.82
26.70
26.70
26.70
26.44
26.21
26.21
26.44
9.23
9.23
9.23
9.19
9.23
9.23
9.19
14.68
14.68
14.68
14.64
14.68
14.68
14.64
S15
S15
S15
—
S14
S14
—
162
157
137
158
157
138
161
HF366N
HF366NR
HF366R
HF366RH
HF366S
56.00
56.07
56.07
45.25
56.14
56.57
—
—
45.82
56.57
—
57.19
57.19
—
—
24.65
24.65
24.65
24.65
24.82
26.21
26.70
26.70
26.70
26.44
9.23
9.23
9.23
9.23
9.19
14.68
14.68
14.68
14.68
14.64
S14
S15
S15
S15
—
161
165
161
141
161
HF367
HF367J
HF367N
HF367NR
HF367R
66.25
66.25
66.25
66.25
66.25
66.82
66.82
66.82
—
—
—
—
—
67.36
67.36
38.40
38.40
38.40
38.40
38.40
39.96
39.96
39.96
40.25
40.25
9.24
9.24
9.24
9.24
9.24
14.68
14.68
14.68
14.68
14.68
—
—
—
—
—
380
380
382
386
382
HF367S
HF368, J, S
HF368N
HF368NR
HF368R
66.25
66.25
66.25
66.25
66.25
66.82
66.82
66.82
—
—
—
—
—
67.36
67.36
38.40
38.40
38.40
38.40
38.40
39.96
39.96
39.96
40.25
40.25
9.24
9.24
9.24
9.24
9.24
14.68
14.68
14.68
14.68
14.68
—
—
—
—
—
380
383
385
388
385
HNF265
HNF265J
HNF265R
HNF265S
44.00
44.14
44.07
44.14
44.57
44.57
—
44.57
—
—
45.19
—
24.65
24.82
24.65
24.82
26.21
26.44
26.70
26.44
9.23
9.19
9.23
9.19
14.68
14.64
14.68
14.64
S14
—
S15
—
109
119
118
118
HNF266
HNF266J
HNF266R
HNF266S
44.00
44.14
44.07
44.14
44.57
44.57
—
44.57
—
—
45.19
—
24.65
24.82
24.64
24.82
26.21
26.44
26.70
26.44
9.23
9.19
9.23
9.19
14.68
14.64
14.68
14.64
S14
—
S15
—
111
115
120
115
HNF361
HNF361J, JW
HNF361R
HNF361RL
HNF361S, SW
HNF362
HNF362J, JW
11.11
11.12
11.11
16.26
11.12
16.26
16.27
12.31
14.14
—
—
14.14
17.46
17.46
—
—
12.63
17.77
—
—
—
6.64
6.65
6.64
9.16
6.65
9.15
9.17
9.01
9.02
9.01
11.53
9.02
11.53
11.47
5.05
5.56
5.05
5.05
5.56
5.05
5.33
10.17
10.46
10.17
10.17
10.46
10.17
10.46
S7
—
S9
S17
—
S16
—
12
13
13
20
13
18
19
HNF362R
HNF362RL
HNF362S, SW
HNF363
HNF363J, JW
HNF363R
16.26
21.95
16.27
21.95
21.96
21.95
—
—
17.46
23.15
23.16
—
17.77
23.46
—
—
—
23.46
9.16
9.64
9.17
9.64
9.65
9.64
11.53
11.97
11.47
12.01
12.02
11.97
5.05
5.05
5.33
5.05
5.34
5.05
10.17
10.17
10.46
10.17
10.46
10.17
S17
S11
—
S10
—
S11
19
24
19
23
24
24
HNF363S, SW
HNF364
HNF364J, JW
HNF364R
HNF364S, SW
21.96
29.90
29.96
29.90
29.96
23.16
31.07
31.07
—
31.07
—
—
—
31.42
—
9.65
14.62
14.62
14.61
14.62
12.02
16.98
16.95
16.99
16.95
5.34
6.36
6.63
6.36
6.63
10.46
12.33
12.58
12.33
12.58
—
S12
—
S13
—
24
46
47
47
47
*For inches / millimeters conversion, multiply inches by 25.4.
햲
Box
F
햲
Shipping
Weight
(lbs.)
SAFETY
SWITCHES
Box
A
Box
D
With
Handle
E
3
Catalog
Number
With
Door
B
Knocks not provided on Type 4 / 4X and 12 or in 800 & 1200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-23
General and Heavy Duty Safety Switches
Dimensions
Safety Switch Dimensions (Inches)* & Shipping Weights
SAFETY
SWITCHES
3
Height
Width
Depth
Catalog
Number
Box
A
With
Door
B
With
Rain Shed
C
Box
D
With
Handle
E
With
Handle
G
Knockout
Diagram
Shipping
Weight
(lbs.)
HNF365
HNF365J, JW
HNF365R
HNF365S, SW
HNF366
44.00
44.14
44.07
44.14
44.00
44.57
44.57
—
44.57
44.57
—
—
45.19
—
—
24.65
24.82
24.65
24.82
24.65
26.21
26.44
26.95
26.44
26.21
9.23
9.19
9.23
9.19
9.23
14.68
14.64
14.68
14.64
14.68
S14
—
S15
—
S14
114
114
118
118
116
HNF366J, S
HNF366R
HNF367, J
44.14
44.07
54.25
44.57
—
54.82
—
45.19
—
24.82
24.65
38.40
26.44
26.95
39.96
9.19
9.23
9.24
14.64
14.68
14.68
—
S15
—
115
120
302
HNF367R
HNF367S
HNF368, J, S
HNF368R
54.25
54.25
54.25
54.25
—
54.82
54.82
54.82
55.36
—
—
—
38.40
38.40
38.40
38.40
40.25
39.96
39.96
40.25
9.24
9.24
9.24
9.24
14.68
14.68
14.68
14.68
—
—
—
—
304
302
305
307
LF111N
LF111NR
7.97
8.07
8.13
—
—
8.16
5.50
5.16
5.94
5.94
3.00
3.13
5.38
5.38
S2
S3
35 (10)
35 (10)
LF211N
LF211NR
LNF222R
7.97
8.07
8.07
8.13
—
—
—
8.16
8.16
5.50
5.16
5.16
5.94
5.94
5.94
3.00
3.13
3.13
5.38
5.38
5.38
S1
S3
S5
35 (10)
35 (10)
35 (10)
Type 1 or 3R
60-200A GD, 30-200A HD Type VBII
Type 1 or 3R
30A GD
E
B
or
C
A
D
E
햲
Type 4/4X or 12
30-200A HD Type VBII
E
G
B
or
C
A
G
B
or
C
A
F
G
E
E
G
B
or
C
A
F
*For inches / millimeters conversion, multiply inches
by 25.4.
D
Type 4/4X or 12
400-1200A HD Type VBII
G
B
or
C
D
F
D
Type 1 or 3R
400-1200A Type VBII (GD & HD)
3-24
Box
F
A
D
햲
F
Knocks not provided on Type 4 / 4X and 12 or in 800 &
1200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
F
General and Heavy Duty Safety Switches
Knockout Diagrams
Type 1 & 3R Enclosures
Removable
plate covering
HA Type
Hub opening
(Max. 1.25 Conduit)
S1
Embossed .25 in.
mounting holes
(4 places)
S3
S2
4 K.O.'s for
Conduit 0.5-0.75 in.
2 K.O.'s for
Conduit 0.5-0.75 in.
10 K.O.'s for Conduit 0.5-0.75-1 in.
2 K.O.'s for
Conduit 0.5-0.75 in.
3
7 K.O.'s for Conduit 0.5-0.75-1 in.
3 K.O.'s for Conduit 0.5-0.75-1 in.
4 K.O.'s for Conduit
0.75, 1 in.
S5
Embossed .25 in.
mounting holes
(3 places)
Embossed .25 in.
mounting holes
(3 places)
S6
2 K.O.'s for
Conduit 0.5-0.75 in.
2 K.O.'s for
Conduit 0.5-0.75 in.
3 K.O.'s for Conduit 0.5-0.75-1 in.
4 K.O.'s for Conduit 0.5-0.75-1 in.
8 K.O.'s for Conduit
0.50, 0.75, 1 in.
2 0.25 dia. K.O's
Removable plate covering
HS Type Hub opening
(Max. 2.5 Conduit)
Removable plate covering
HS Type Hub opening
(Max. 2.5 Conduit)
4 K.O.'s for Conduit
0.75, 1 in.
S7
S8
S9
2 K.O.'s for Conduit
0.75, 1 in.
5 K.O.'s for Conduit
0.50, 0.75, 1 in.
1 0.25 dia. K.O.
2 0.25 dia. K.O's
2 K.O.'s for Conduit
0.75, 1 in.
5 K.O.'s for Conduit
0.50, 0.75, 1 in.
1 0.25 dia. K.O.
Removable plate covering
HS Type Hub opening
(Max. 2.5 Conduit)
S12
S10
S11
1 0.25 dia. K.O.
2 0.25 dia. K.O.
4 K.O.'s for Conduit
0.75, 1, 1.25, 1.50 in.
10 K.O.'s for Conduit
1, 1.25, 1.50, 2 in.
1 0.88 dia. K.O.
5 K.O.'s for Conduit
1, 1.25, 1.50, 2 in.
2 K.O.'s for Conduit
0.75, 1, 1.25, 1.50 in.
1 0.88 dia. K.O.
1 0.25 dia. K.O.
1 0.88 dia. K.O.
14 K.O.'s for Conduit
1.25, 1.50, 2.00, 2.50 in.
*For inches / millimeters conversion, multiply inches
by 25.4.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-25
SAFETY
SWITCHES
10 K.O.'s For Conduit
0.50, 0.75, 1 in.
Removable
plate covering
HA Type
Hub opening
(Max. 1.25 Conduit)
S4
Embossed .25 in.
mounting holes
(3 places)
Embossed .25 in.
mounting holes
(4 places)
General and Heavy Duty Safety Switches
Knockout Diagrams
Type 1 & 3R Enclosures
Removable plate covering
HS Type Hub opening
(Max. 2.5 Conduit)
S14
S15
S13
1, 0.25, dia. K.O
8 K.O.'s for Conduit
2.00, 2.50, 3.00, 3.50 in.
4 0.50, 0.75 dia. K.O.'s
SAFETY
SWITCHES
3
7 K.O.'s for Conduit
1.25, 1.50, 2.00, 2.50 in.
1 0.88 dia K.O.
Removable plate covering
HS Type Hub opening
(Max. 2.5 Conduit)
S16
S17
2 0.25 dia. K.O.
1 0.25 dia. K.O.
14 K.O.'s for Conduit
0.50, 0.75, 1, 1.25 in.
1 0.88 dia. K.O.
7 K.O.'s for Conduit
0.50, 0.75, 1, 1.25 in.
1 0.88 dia. K.O.
*For inches / millimeters conversion, multiply inches
by 25.4.
3-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4 K.O.'s for Conduit
2.00, 2.50, 3.00, 3.50 in.
2 0.50, 0.75 dia. K.O.'s
Special Application Safety Switches Dimension Drawings
Non-Metallic
Dimensions
W
Non-Metallic
4 X 0.50
(12.70)
C
F
G
H
A
E
3
D
J
SAFETY
SWITCHES
B
Dimensions (Inches) Non-Metallic
Catalog
Number
H
W
D
A
B
C
E
F
G
J
HF321NX
HF322NX
HF361NX햲
HF362NX햲
HF363NX햲
HF364NX햲
18.75
18.75
18.75
18.75
26.95
33.41
12.11
12.11
12.11
12.11
14.87
27.47
10.25
10.25
10.25
10.25
13.25
13.19
16.59
16.59
16.59
16.59
24.84
31.31
10.97
10.97
10.97
10.97
13.72
26.31
7.00
7.00
7.00
7.00
6.25
18.50
17.50
17.50
17.50
17.50
25.75
32.25
1.98
1.98
1.98
1.98
3.75
3.91
.46
.46
.46
.46
.46
.47
9.20
9.20
9.20
9.20
12.15
12.10
HNF361X햲
HNF362X햲
HNF363X햲
HNF364X햲
18.75
18.75
26.95
33.41
12.11
12.11
14.87
27.47
10.25
10.25
13.25
13.19
16.59
16.59
24.84
31.31
10.97
10.97
13.72
26.31
7.00
7.00
6.25
18.50
17.50
17.50
25.75
32.25
1.98
1.98
3.75
3.91
.46
.46
.46
.47
9.20
9.20
12.15
12.10
VBII Interlocked Receptacle Switches
Ampere
Rating
B
Dimensions (Inches)
A
B
C
D
E
F
6.22
6.34
6.80
1.52
1.52
1.52
6.1
6.4
6.5
6.0
7.4
7.6
6.22
6.34
6.80
1.52
1.52
1.52
6.1
6.4
6.5
6.0
7.4
7.6
1.52
1.52
3.5
5.0
3.0
4.5
D
E
G
Cr-H Type Fusible (240 & 600V)
30
60
100
14.27
16.27
21.96
7.42
9.17
9.65
9.02
11.47
12.02
A
Cr-H Type Non-Fusible (600V max.)
30
60
100
14.27
16.27
21.96
7.42
9.17
9.65
9.02
11.47
12.02
Pyle-National Type Fusible (240 & 600V)
30
60
14.27
16.27
7.42
9.17
9.02
11.47
6.22
6.34
G
Pyle-National Type Non-Fusible (600V max.)
30
60
14.27
16.27
7.42
9.17
9.02햲
11.47햲
*For inches / millimeters conversion, multiply inches
by 25.4.
6.22
6.34
1.52
1.52
햲
3.5
5.0
3.0
4.5
C
F
Dimensions also apply to “L” suffix switches (less
lugs).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-27
Special Application Safety Switches Dimension Drawings
4-Pole & 6-Pole
Dimensions
4 & 6-Pole Safety Switch Dimensions – Inches (mm)
Mounting
Enclosure
Catalog
Number
A
B
C
Figure 1, 4-Pole Fusible and Non-fusible, Type 1
SAFETY
SWITCHES
3
HNF461
HF461
HNF462
HF462
HNF463
HF463
HNF464
HF464
24.50
29.12
24.88
33.53
27.62
36.44
36.00
49.48
(622)
(740)
(632)
(852)
(702)
(926)
(914)
(1257)
9.53 (242)
9.53 (242)
11.50 (292)
11.50 (292)
12.18 (309)
12.18 (309)
19.12 (486)
19.12 (486)
6.09
6.09
6.09
6.09
6.09
6.09
6.42
6.42
D
(155)
(155)
(155)
(155)
(155)
(155)
(163)
(163)
19.00
23.50
19.00
27.50
19.36
28.11
30.88
45.50
(483)
(597)
(483)
(699)
(492)
(714)
(784)
(1130)
E
F
6.75 (171)
6.75 (171)
9.38 (238)
9.38 (238)
8.00 (203)
8.00 (203)
15.00 (381)
15.00 (381)
0.268 (7)
0.268 (7)
0.268 (7)
0.268 (7)
0.268 (7)
0.268 (7)
0.44 (11)
0.44 (11)
Figure 2, 4 & 6-Pole Fusible Type 12/3R and 4X
HF461J,
HF661S
HF462J,
HF662S
HF463J,
HF663S
HF464J,
HF664S
HF661J,
29.50 (622)
9.53 (242)
6.48 (165)
31.65 (804)
5.47 (139)
0.27 (7)
HF662J,
33.53 (852)
11.50 (292)
6.48 (165)
35.69 (907)
8.00 (203)
0.27 (7)
HF663J,
36.44 (926)
12.18 (309)
6.48 (165)
38.67 (982)
8.47 (215)
0.27 (7)
HF664J,
49.48 (1257)
19.12 (486)
6.78 (172)
51.64 (1312)
13.44 (341)
0.33 (8)
Figure 2, 4 & 6-Pole Non-fusible Type 12/3R and 4X
HNF461J,
HNF661S
HNF462J,
HNF662S
HNF463J,
HNF663S
HNF464J,
HNF664S
HNF661J,
24.50 (622)
9.53 (242)
6.48 (165)
26.65 (667)
5.47 (139)
0.27 (7)
HNF662J,
24.88 (632)
11.50 (292)
6.48 (165)
27.03 (687)
8.00 (203)
0.27 (7)
HNF663J,
27.54 (700)
12.18 (309)
6.48 (165)
29.77 (756)
8.47 (215)
0.27 (7)
HNF664J,
36.00 (914)
19.12 (486)
6.78 (172)
38.16 (969)
13.44 (341)
0.33 (8)
Figure 1: Type 1
3-28
Figure 2 : Type 12/3R and 4X
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Special Application Safety Switches Dimension Drawings
Double Throw
Selection
Description
fusible switches so that the fuses are on the
load side of the switching mechanism.
Double throw switches are intended to transfer
loads from one power source to another. All 2 &
3-pole double throw switches are suitable for
use as service equipment. All are UL Listed and
both horsepower and load break rated.
Switches are rated for use on systems up to
10,000A when protected with Class H fuses or
100,000A when protected with Class R or Class
T fuses. They can also be used to connect a
single source of power to either of two loads. In
this application it is necessary to field modify
A cover interlock is provided on all ampere
ratings. The operating handle may be
padlocked in the off position.
Fuse Capabilities of Fusible DTF Switches
Amp
Rating
Fuse Type
H
R
T
J
30 & 60A, 240V
Std
Yes (kit)
No
No
30 & 60A, 600V
Std
Yes (kit)
No
Yes
100 & 200A
Std
Yes (kit)
Yes (kit)
400 & 600A (DTF) No
No
Yes
Yes
Std
3
Double Throw Switches
System
Voltage
Amps
Catalog
Number
Type 12/3R — Industrial
Type 4X — Stainless Steel
Catalog
Number
Catalog
Number
Catalog
Number
DTF224R
List
Price $
List
Price $
List
Price $
Heavy Duty Fusible (30-200A) with Class H fuse spacings
240
Volt AC
or
250
Volt DC
2
200
DTF224▲
4043.00
5633.00
—
—
—
—
3
30
60
100
200
400
600
DTF321
DTF322
DTF323▲
DTF324
DTF325
DTF326▲
1180.00
2119.00
3551.00
5233.00
12487.00
13503.00
DTF321R▲
DTF322R▲
DTF323R
DTF324R
FR325DTK▲
FR326DTK▲
1733.00
2844.00
4020.00
6866.00
14403.00
15944.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30
60
100
200
400
DTF361
DTF362▲
DTF363
DTF364
DTF365
2265.00
2376.00
4177.00
6143.00
12778.00
—
—
DTF363R
DTF364R
FR355DTK▲
—
—
5408.00
7991.00
14650.00
—
—
—
—
—
—
—
—
—
—
—
—
F353SSDTK▲
F354SSDTK▲
F355SSDTK▲
2
30
60
100
200
400
DTNF221
DTNF222
DTNF223
DTNF224
DTNF225
672.00
1062.00
1485.00
1953.00
5599.00
—
—
—
DTNF224R
DTNF225R
—
—
—
2557.00
8618.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3
30
60
100
200
400
600
800
DTNF321
DTNF322
DTNF323
DTNF324
DTNF325
DTNF326
DTNF327▲
795.00
1271.00
1924.00
2804.00
7859.00
10523.00
16275.00
—
—
DTNF323R
DTNF324R
—
—
—
—
—
2210.00
3556.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30
60
100
200
400
600
800
1200
DTNF361
DTNF362
DTNF363
DTNF364
DTNF365
DTNF366
DTNF367
DTNF368▲
893.00
1236.00
2053.00
3003.00
8033.00
11760.00
18092.00
24760.00
DTNF361R
DTNF362R
DTNF363R
DTNF364R
DTNF365R
DTNF366R
DTNF367R
DTNF368R
1538.00
2041.00
3567.00
5040.00
13137.00
16589.00
19178.00
26601.00
DTNF361J
DTNF362J
DTNF363J
DTNF364J▲
NF355HDTK
—
—
—
—
—
—
NF454DTK
NF455DTK▲
NF456DTK▲
NF457DTK▲
—
—
—
5192.00
13378.00
17588.00
44586.00
NFR451DTK ▲
NFR452DTK ▲
NFR453DTK ▲
NFR454DTK ▲
NFR455DTK▲
NFR456DTK▲
NFR457DTK▲
4106.00
4373.00
6489.00
8758.00
18123.00
22291.00
54653.00
—
—
—
—
—
—
—
600
Volt AC, 3
250
Volt DC
Heavy Duty Non-Fusible
240
Volt AC
or
250
Volt DC
3
600
Volt AC,
or
250
Volt DC
4
30
60
100
200
400
600
800
General Duty Non-Fusible
240
Volt AC
—
—
14502.00
17873.00
29061.00
Type 3R — Outdoor
Less Neutral
Type 3R — Outdoor
With Neutral
1850.00
2517.00
3297.00
7125.00
13283.00
—
—
—
DTNF361S
DTNF362S
DTNF363S
DTNF364S
NF355SSDTK
—
—
—
4624.00
6196.00
9254.00
11220.00
23311.00
—
—
—
—
—
—
—
—
—
—
—
—
—
NF454SSDTK▲
—
—
—
—
—
—
19858.00
—
—
—
2
100
200
DTGNF223R
DTGNF224R
1150.00
1850.00
DTGNF223NR
DTGNF224NR
1349.00
2202.00
—
—
—
—
—
—
—
—
3
100
200
DTGNF323R
DTGNF324R
1678.00
2097.00
DTGNF323NR
DTGNF324NR
1890.00
2432.00
—
—
—
—
—
—
—
—
▲ Built to order. Allow 3–4 weeks for delivery.
Use HS Type hubs for 30–200A switches.
400A and larger switches do not have hub provisions.
All Heavy Duty double throw switches with a catalog
Discount Schedule HDSS
number starting with “DT” are rated 200,000 AIC max.
when protected by Class R, J or T fuses. Fuse ampere
rating must not exceed switch ampere rating.
Move load base.
Will accept class T Fuses only.
4-pole switches are not approved for service entrance.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-29
SAFETY
SWITCHES
Type 3R — Outdoor
List
Price $
Type 1 — Indoor
Number
of Poles
Safety Switches
Double Throw
Selection
Accessories, Lug Data and Horsepower Ratings
Wire Ranges (Line, Load
and Neutral) per NEC
Requirements
Accessories – 2 and 3-Pole Switches Type “DT” Only햲
Catalog
Number
3
Description
Neutral Kits
30A
60 & 100A
200A
400 & 600A
800 & 1200A
Equipment
Ground Kit
30-200A
400 & 600A
800-1200A
(2) #14-4 AWG
(4) #14-2/0
(8) #6-350 Kcmil
30-200A
30-200A
400-1200A
400-1200A
with
with
with
with
SAFETY
SWITCHES
Auxiliary Contacts (HD only)
(two required per switch)햵
Class R Fuse Clip Kits
(two required per switch)
Class T Fuse Adapter Kits
(two required per pole)
Type 3R Hubs (30-200A)
(1)
(2)
(1)
(2)
NO
NO
NO
NO
&
&
&
&
(1)
(2)
(1)
(2)
NC
NC
NC
NC
contact
contacts
contact
contacts
List
Price $
30-200A – 2, 3 & 4-Pole Switches
HNC612
HN263
HNC264
HN678
HND678
97.00
225.00
352.00
838.00
919.00
Switch
Ampere
Rating
Wire Range (Cu/Al)
New VBII Design
Line, Load and Neutral
0
30
(1) #14–6
HG61234
HG656
HG678
24.00
123.00
239.00
060
(1) #14–2
100
(1) #14–1/0 AWG
HA161234
HA261234
HA165678
HA265678
239.00
266.00
587.00
614.00
100
(1) #14–1/0 AWG
200
(1) #6–250 kcmil
400-1200A – 2 & 3-Pole Switches
Switch
Ampere
Rating
HR21
HR612
HR62
HR63
HR64
100A,
100A,
200A,
200A,
HT23
HT63
HT24
HT64
76.00
120.00
102.00
143.00
600
(2) 1/0 AWG–500 kcmil
800
(2) 1/0 AWG–750 kcmil or
(3) 1/0 AWG–500 kcmil
ECHS075
ECHS100
ECHS125
ECHS150
ECHS200
ECHS250
39.50
39.50
39.50
39.50
69.00
109.00
1200
(3) 1/0 AWG–600 kcmil or
(4) 1/0 AWG–500 kcmil
For
For
For
For
For
For
240V
600V
240V
600V
Kit
Kit
Kit
Kit
⁄4" Conduit
1" Conduit
1 1⁄4" Conduit
1 1⁄2" Conduit
2" Conduit
2 1⁄2" Conduit
3
83.00
83.00
83.00
54.00
54.00
400
Catalog
Number
Description
(1) NO, (1) NC햵
(2) NO, (2) NC햵
Auxiliary Switch
(two required per switch)
Switch
Ampere
Rating
30-800A
Ground Lug Kit햴
30-60-100A
200A
400-600-800A
Hubs
30-60-100A
200-400A
600-800A
30-60-100A
200A
400 & 600A Fusible
400A 3P Non-Fusible
1-Phase AC
0 30
0 60
100
200
400
600
3-Phase AC
480V
600V
03
10
15
15
—
—
0 71⁄2
15
30
60
125
125
015
030
060
125
125
—
020
050
075
150
125
—
05
10
20
40
50
50
05
10
15
15
—
10
20
40
60
125
020
050
075
125
250
030
060
100
150
350
05
10
20
40
50
240V
DS100GK
DS200GK
DS468GK
12.00
203.00
292.00
DT100NK
DT200NK
DS800NK
DT600NK
195.00
391.00
488.00
432.00
400
(1) 1/0 AWG–300 kcmil or
(2) 1/0 AWG–750 kcmil
600
(2) 250-500 Kcmil
800
(3) 250-500 Kcmil
Replacement Parts – 2 and 3-Pole Switches Only 햲
250V
DC
240V
373.00
743.00
Wire Range (Cu/Al)
New VBII Design
Line, Load and Neutral
Use Type HR Hubs
Use Type SSH 4, 4X Hubs
Use Type SSH 4, 4X Hubs
Maximum Horsepower Ratings
Fused
Ampere
Rating
List
Price $
DS200EK1
DS200EK2
(1) 1/0 AWG–750 kcmil or
(2) 1/0 AWG–250 kcmil
400-800A – 4-Pole switches
Accessories – 4-Pole and Type “F” & “NF” 3-Pole Switches Only햳
Neutrals (3-pole only)
Wire Range (Cu/Al)
New VBII Design
Line, Load and Neutral
30A, 240V Kit
30A, 600V Kit/60A, 240V Kit
60A, 600V Kit
100A Kit
200A Kit
Catalog
Number
Description
Type 1, 3R & 12 Replacement Handle
Type 4X Replacement Handle
Replacement Handle
30-200A
30-200A
400-1200A
List
Price $
HHD61234
HHD61234S
98.00
174.00
HHD65678
143.00
Non-Fused
0
0
30
60
100
200
400-800
▲ Built to order. Allow 6–8 weeks for delivery.
햲
For “DT” VBII Type switches only.
햳 Also for fusible stainless & 400A Type 12 & 4x switches.
3-30
햴
The following ground lugs are provided as standard in
200A and larger switches 200-(1) #14-4 Cu/Al
400-800A-(3) #6-250MCM Cu/Al.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햵
One aux. required for normal and one required for
emergency switch line base.
Discount Schedule HDSS & RESI
Safety Switches
Dimensions
VBII Design Double Throw Dimensions (Inches)
Enclosure
Catalog Number
Mounting
A
B
C
D
E
F
Figure 1 (30-1200A Type 1 & 3R)
9.53
6.09
19.00
6.75
0.268
29.12
9.53
6.09
23.50
6.75
0.268
DTNF222, DTNF322, DTNF362, DTNF362R
24.88
11.50
6.09
19.00
9.38
0.268
DTF322, DTF322R, DTF362
33.45
11.50
6.09
27.50
9.38
0.268
DTNF223, DTNF323, DTNF323R, DTNF363, DTNF363R,
DTGNF223R, DTGNF223NR, DTGNF323R , DTGNF323NR
27.62
12.18
6.09
19.36
8.00
0.268
DTF323, DTF323R, DTF363, DTF363R
36.44
12.18
6.09
28.11
8.00
0.268
DTNF224, DTNF224R, DTNF324, DTNF324R, DTNF364, DTNF364R,
DTGNF224R, DTGNF224NR, DTGNF324R, DTGNF324NR
36.00
19.12
6.42
31.00
15.00
0.44
DTF224, DTF224R, DTF324, DTF324R, DTF364, DTF364R
49.44
19.12
6.42
44.50
15.00
0.44
DTF325, DTF326, DTF365
73.54
28.22
9.44
65.50
16.00
0.56
DTNF225, DTNF225R, DTNF325, DTNF365, DTNF365R
57.71
28.22
9.44
49.75
16.00
0.56
DTNF326, DTNF366, DTNF366R
57.71
28.22
9.44
49.75
16.00
0.56
DTNF327, DTNF367, DTNF367R
71.65
41.60
9.44
63.70
32.00
0.56
DTNF368, DTNF368R
71.65
41.60
9.44
63.70
32.00
NFR451DTK 햴, NFR452DTK 햴, NFR453DTK 햴
24.63
11.63
4.78
21.50
9.25 햲
0.25햲
NF454DTK 햳햴, NFR454DTK 햳햴
37.25
19.19
6.32
33.50
16.00 햳
0.56햳
8.88
58.50
22.25 햳
0.56햳
NF455DTK햴, NF456DTK햴, NF457DTK햴,
NFR455DTK햴, NFR456DTK햴, NFR457DTK햴
63.31
27.00
0.56
Figure 2 (30-200A Type 12 & 4X)
DTNF361J, DTNF361S
24.42
9.65
6.48
26.65
5.47
0.27
DTNF362J, DTNF362S
24.80
11.61
6.48
27.03
8.00
0.27
DTNF363J, DTNF363S
27.54
12.29
6.48
29.77
8.47
0.27
DTNF364J, DTNF364S
35.93
19.24
6.78
38.16
13.44
0.33
NF355HDTK햲, NF355SSDTK햲
53.82
22.66
7.25
56.20
18.00
0.56
F353SSDTK햳햴
37.00
11.62
5.50
38.50
9.00
0.26
F354SSDTK햳햴
50.90
19.16
6.46
53.27
16.12
0.50
F355SSDTK햳햴
74.50
25.00
8.92
76.69
20.25
0.56
E
E
D
A
D
CL
A
CL
(6) “F” dia. mounting holes (30-200A)
(4) “F” dia. mounting holes (400-1200A)
C
(6) “F” dia. mounting holes (30-200A)
(4) “F” dia. mounting holes (400-1200A)
C
B
B
Figure 1
Type 1 & 3R햵
*For inches / millimeters conversion, multiply inches
by 25.4.
햲
햳
(3) Mounting holes supplied (1 at top).
(4) Mounting holes provided.
Figure 2
Type 4X & 12
햴
햵
These switches are not Type VBII design.
Drip hood not shown but provided on
Type 3R enclosures.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-31
SAFETY
SWITCHES
24.50
DTF321, DTF321R, DTF361
3
DTNF221, DTNF321, DTNF361, DTNF361R
Enclosed Switches
Rotary Disconnect Switches in Non-Metallic Enclosures
Application
SAFETY
SWITCHES
3
Siemens Rotary Disconnect switches
are ideally suited for use as ”in sight“
disconnects for motor loads and other
electrical equipment which is remotely
located from its branch circuit protective
device. All are supplied in non-metallic
enclosures which are UL & CUL or CSA
approved for a wide range of both
indoor and outdoor environments. All
meet UL508 requirements.
Description
16–125A non-fusible switches are
available in non-metallic enclosures
which are UL approved as Type 12 &
4X and for either indoor or outdoor use.
All are horsepower and load break
rated. All are panel mounted and are
either supplied with factory installed
aux. contacts or will accept contact
kits. All are compact in size while providing ample wiring space for copper
line & load conductors.
Siemens Enclosed Rotary
Disconnect Switches
▪ 16–125A, Non-Fusible
▪ 600VAC max. rated (except catalog
no. HNF3100CX is rated 480VAC
max.)
▪ Available in both Type 12 and 4X
non-metallic enclosures
▪ Both screw and hinged cover
designs available
3-Pole, 3-Wire
▪ HP rated
▪ Rotary handles are available in
black, red, and yellow and in pistol
grip designs
▪ Listed and marked “suitable for use
as motor disconnect” per NEC
Section 430-109
▪ 16–63A screw cover switches have
factory installed ground bars. All
hinge cover switches accept
ground lug kits
▪ Screw cover switches are UL listed
under File No. E47705 and are CSA
certified under File No. 203576
▪ IEC 60947-3 rated and CE marked
(enclosures are IP65 rated)
▪ Screw cover switches are
provided with knockouts
▪ Hinged door switches are UL listed
for multiple line and load conductors
per phase in 30–100A ratings. They
are UL & CUL listed under File No.
E191706
Catalog Number
Ampere
Rating
Selection
▪ Padlockable in OFF position
with up to (3) padlocks
Horsepower Ratings
List
Price $
3-Pole, 3-Wire with (1) NO
& (1) NC Aux. Contact
List
Price $
Shipping
Weight
240V AC
1-Phase
3-Phase
480V AC
3-Phase
600V AC
3-Phase
Non-Fusible, Type 1, 4X & 12K with Screw Cover and Black Rotary Handle 600V AC Max.
16
25
30
30
30
63
100
125
3LD2064-0TB51-0US1
3LD2164-0TB51-0US1
3LD2264-0TB51-0US1
—
—
3LD2565-0TB51-0US1
3LD2766-0TB51-0US1
3LD2866-0TB51-0US1
313.00
336.00
395.00
—
—
579.00
929.00
1555.00
3LD2064-1GP51-0US1
3LD2164-1GP51-0US1
3LD2264-1GP51-0US1
3LD2264-1TS51-0US1 ▲
3LD2264-2TW51-0US1
▲
3LD2565-1GP51-0US1▲
3LD2766-1GP51-0US1▲
3LD2866-1GP51-0US1▲
355.00
378.00
437.00
453.00
483.00
621.00
1000.00
1613.00
1
1
1
1
1
3
6
6
11⁄2
3
3
3
3
10
—
—
3
71⁄2
71⁄2
71⁄2
71⁄2
15
30
40
71⁄2
10
15
15
15
40
60
75
10
15
20
20
20
50
75
100
71⁄2
10
15
15
15
40
60
75
10
15
20
20
20
50
75
100
15
40
50
20
50
—
Non-Fusible, Type 1, 4X & 12K with Screw Cover and Red and Yellow Rotary Handle 600V AC Max.
16
25
30
30
30
63
100
125
3LD2064-0TB53-0US1
3LD2164-0TB53-0US1
3LD2264-0TB53-0US1
—
—
3LD2565-0TB53-0US1
3LD2766-0TB53-0US1▲
3LD2866-0TB53-0US1▲
313.00
336.00
395.00
—
—
579.00
929.00
1555.00
3LD2064-1GP53-0US1
3LD2164-1GP53-0US1
3LD2264-1GP53-0US1
3LD2264-1TS53-0US1 ▲
3LD2264-2TW53-0US1
▲
3LD2565-1GP53-0US1▲
3LD2766-1GP53-0US1▲
3LD2866-1GP53-0US1▲
355.00
378.00
437.00
453.00
483.00
621.00
1000.00
1613.00
1
1
1
1
1
3
6
6
11⁄2
3
3
3
3
10
—
—
3
71⁄2
71⁄2
71⁄2
71⁄2
15
30
40
Non-Fusible, Type 4X with Hinged Door and Black Pistol Grip Rotary Handle 480V AC Max.
30
60
100
HNF3030CX
HNF3060CX
HNF3100CX
870.00
1189.00
1494.00
▲ Built to order. Allow 6–8 weeks for delivery.
Carton
quantity of (1). Shipping weight in pounds (lbs.).
Approved for both indoor and outdoor use. No cover
interlock provided.
30 and 60A switches are also rated 600V AC.
Also rated as Type 12 and UL approved for both indoor
and outdoor use. Defeatable cover interlock provided.
3-32
—
—
—
—
—
—
4
4
5
Screw
cover enclosures are constructed from Makrolon
9425. Hinged cover enclosures are constructed from
fiberglass reinforced polycarbonate.
Switch is supplied with (2) NO and no NC aux. contacts.
Switch is supplied with (4) NO and no NC aux. contacts.
Ground bar is not provided or available.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3
10
15
71⁄2
15
25
Aux. contacts break about 3 Ms before and make about
3 Ms after main switch contacts.
25A, switch with 1 NO & 1 NC aux. contacts and a
black operating handle is also available. Order catalog
number 3LD2165-4VD51 (Discount Code: Pilot Devices).
6P,
Discount Schedule HDSS
Enclosed Switches
Rotary Disconnect Switches
Selection
Wire ranges 60/75°C Cu Only
Enclosed Disconnect Switch Dimensions (Inches)*
3LD2 Type Switches
Dimensions
Catalog
Number
Ampere Fig.
Rating No.
A
B
C
D
3LD20643LD21643LD22643LD25653LD27663LD2866HNF3030CX
HNF3060CX
HNF3100CX
16
25
30
63
100
125
30
60
100
5.52
5.52
5.52
6.93
11.90
11.90
7.87
11.77
11.77
3.94
3.94
3.94
5.75
8.35
8.35
7.87
7.87
7.87
3.19
3.19
3.19
4.10
5.36
5.36
5.20
5.20
5.20
4.57
4.57
4.57
5.87
7.13
7.13
7.29
7.29
7.29
1
2
16 Amps
25–30 Amps
63 Amps
100–125 Amps
(1) #18- 10 AWG
(1) #14 - 10 AWG
(1) #14 - 6 AWG
(1) #12- 1 AWG
HNF Type Switches
30 Amps
Note: 3LD2 Type switches only have top and bottom end KOs as follows:
16-30A - 1/2" & 3/4", 63A - 3/4" & 1", 100 & 25A - 1" & 1 1/4"
Figure 1
D
60 & 100 Amps
Figure 2
SAFETY
SWITCHES
(1) #14 - #10 AWG Solid
(1) #14 - #1 AWG Stranded
(2) #6 AWG Stranded
Up to (3) #8 AWG Stranded
Up to (6) #10 AWG Stranded
Up to (6) #12 AWG Solid
C
A
3
(1) #14 - #10 AWG Solid
(1) #14 - #4 AWG Stranded
Up to (4) #12 AWG Solid
Up to (3) #12 AWG Stranded
Up to (6) #14 AWG Stranded
Up to (4) #14 AWG Stranded
with (1) #10 AWG Stranded
D
C
B
A
UL and CUL Short Circuit Withstand Ratings
Short Circuit Withstand Rating and Fuse Class
With Load Side Fusing
With Line Side Fusing
Ampere 5 kA at
Rating
600V Max
10 kA at
600V Max
18 kA at
480V Max
5 kA at
480V Max
18 kA at
480V Max
3LD2 Type Switches
—
—
—
—
RK5
25 & 30
(80A Max)
—
—
—
—
—
—
—
—
—
—
—
63
RK5
(175A Max)
100 &
125
—
RK5
(200A Max)
HNF Type Switches
30
—
H, K & RK5
(100A Max)
H, K & RK5
(150A Max)
60
100
For
H, K & RK5
(30A Max)
J, T & CC
(100A Max)
H, K & RK5
(60A Max)
B
IEC Fuse and Withstand Ratings
RK5
(50A Max)
16
.5
Ferraz
Shawmut
A50P or lower
let-through
semiconductor
fuses
(60A Max)
Ferraz
Shawmut
A50P or lower
let-through
semiconductor
fuses
(100A Max)
use as supplemental protection on the load side of the branch circuit over current
protective device.
Ground lug kit has two lugs for #14-4 Cu/Al wire.
Factory installed ground lugs supplied as follows: 16-30A #14-10 Cu, 63A #14-8 Cu.
Ground lug not provided and is not available on catalog numbers 3LD2264-2TW51-0US1
and 3LD2264-2TW53-0US1.
6.38 inches high including mounting feet.
7.85 inches high including mounting feet.
60 & 100A HNF switches are rated 10kA at 480V max. with line side Class H, K & RK5
150A max. fuses.
Wire range (1) #14-2 AWG 60/75 °C Cu only.
16-63A 3LD switches are also rated 5kA at 600VAC max when protected by a 3RV type
MSP of the same or lesser ampere rating.
*For inches / millimeters conversion, multiply inches by 25.4.
Ampere Rating
gG Fuse Size
Short Circuit Rating
3LD2 Screw Cover Switches
16
20A
5k Arms
25
25A
10k Arms
32
50A
10k Arms
63
63A
15k Arms
100
100A
20k Arms
125
125A
20k Arms
HNF Hinged Cover Switches
30
63A
10k Arms
60
100A
10k Arms
100
100A
10k Arms
Accessories
Switch
Ampere
Rating
Catalog
Number
3LD2 Type Switches
List
Price $
Description
(Discount Schedule PILO)
16 –30A
3LD9220-2C
23.00
Neutral Kit
63A
3LD9250-2CA
32.00
Neutral Kit
100 –125A
3LD9280-2C
39.50
Neutral Kit
HNF Type Switches (Discount Schedule HDSS)
30–100A
GSGK60
24.00
Ground Lug Kit
30A
LBRA1
59.00
Auxiliary Contact Kit (1 NO - 1 NC)
60 –100A
LBRA2
65.00
Auxiliary Contact Kit (1 NO - 1 NC)
30 –100A
HF63CX
76.00
Neutral Kit
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3-33
Enclosed Switches
Enclosed Bolted Pressure Switches & Safety Switch Replacement Parts
Selection
For enclosed bolted pressure contact switches order as lug-in/lug-out single section
BPS main switchboards using the SPACE 2000 Switchboard EPM.
VBII Safety Switch Replacement Parts
Line
Base
Ampere
Rating
Catalog
Number
Load
Base
List
Price $
Catalog
Number
List
Price $
Handle / Handle Guard
General Duty
Heavy Duty
Catalog
Number
List
Price $
Catalog
Number
—
51.00
—
HH6123햸
—
HH6123햸
62.00
—
62.00
—
—
—
—
—
HH65678
—
—
—
—
—
—
—
137.00
—
—
HH6123햸
HH6123햸
HH6123햸
HH64햸
HH65678햸
HH65678햸
HH65678햸
HH68햸
62.00
62.00
62.00
87.00
137.00
137.00
137.00
131.00
—
GH223
—
GH223
GH24
HH65678
HH65678
—
—
—
51.00
—
51.00
61.00
137.00
137.00
—
—
HH6123햸
—
HH6123햸
HH6123햸
HH64햸
HH65678햸
HH65678햸
HH65678햸
HH68햸
62.00
—
62.00
62.00
87.00
137.00
137.00
137.00
131.00
List
Price $
SAFETY
SWITCHES
3
Fusible 2- and 3-Pole 60-600A General Duty & 30-1200A Heavy Duty햶햹
30 HD 240V
60 GD
60 HD 240V
HFB21햳
HFB612햳
HFB22햳
30 600V
60 600V
100
200
400
600
800
1200
HFB612햳
HFB62햳
HFB63햳
HFB64햳
HFB65햴햷
HFB66햴햷
HFB67A햳햷
HFB68햳햷
HBB21햳
HBB612햳
HBB22햳
84.00
137.00
141.00
HBB612햳
HBB62햳
HBB63햳
HBB64햳
HBB656햷
HBB656햴햷
HBB67A햳햷
HBB68햳햷
137.00
169.00
208.00
447.00
393.00
393.00
863.00
1063.00
56.00
81.00
83.00
81.00
97.00
176.00
256.00
225.00
225.00
473.00
691.00
—
GH223
—
Non-Fusible 3-Pole 60-600A General Duty & 30-1200A Heavy Duty햶햹
HNB612햳
HNB612햳
HNB623햳
HNB623햳
HNB64햳
HNB65햴햷
HNB66햴햷
HNB67A햳햷
HNB678햷
30 HD
60 GD
60 HD
100
200
400
600
800
1200
Ampere
Rating
77.00
77.00
313.00
313.00
327.00
313.00
313.00
866.00
1056.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Mechanism Assembly
Line & Load Lugs
Catalog
Number
Catalog
Number
List
Price $
List
Price $
Fusible 2- and 3-Pole 60-600A General Duty & 30-1200A Heavy Duty햶햹
30 HD 240V
60 GD
60 HD 240V
HM6123햸
HM6123
HM6123햸
72.00
72.00
72.00
30 600V
60 600V
100
200
400
600
800
1200
HM6123햸
HM6123햸
HM6123햸
HM64햸
HM65
HM66
HM67A
HM678
72.00
72.00
72.00
190.00
327.00
471.00
761.00
1314.00
HL612햲
HL612햲
HL612햲
HL612햲
HL612햲
HL63햲
HL64햲
HL65678햵
HL65678햵
HL67A햷햺
햺
38.50
38.50
38.50
38.50
38.50
97.00
165.00
37.50
37.50
109.00
—
Non-Fusible 3-Pole 60-600A General Duty & 30-1200A Heavy Duty햶햹
HM6123햸
HM6123
HM6123햸
HM6123햸
HM64햸
HM65
HM66
HM67A
HM678
30 HD
60 GD
60 HD
100
200
400
600
800
1200
HL612햲
HL612햲
HL612햲
HL63햲
HL64햲
HL65678햵
HL65678햵
HL67A햷햺
72.00
72.00
72.00
72.00
190.00
327.00
471.00
761.00
1314.00
햺
햲
햶
햳
햷
햴
햸
Three lugs included in kit.
Includes lugs.
Lugs not included.
햵 One lug per kit.
3-34
38.50
38.50
38.50
97.00
165.00
37.50
37.50
109.00
—
One per switch required unless otherwise noted.
One required per pole.
For type 4/4X stainless steel switches add “S” to end of
catalog number.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햹
햺
For replacement door for heavy duty switches add
“DOOR” to end of switch catalog number.
Lugs included with line and load bases.
Discount Schedule HDSS
4SPEEDFAX
TM
2007-2008 Disconnect Switches
Contents
Compact Non-Fusible Switches
Rotary and Toggle Switch—Selection
Dimensions and Wire Ranges
4-2 – 4-4
4-5
Type VBII (30-600A)
Features and Ordering Information
4-6
Switch and Handle Selection
4-7
Accessories
Dimensions and Lug Wire Ranges
4-8 – 4-9
4-10
Type MCS (30-200A)
Switches, Fuse, and No Fuse Kit—Selection
4-11
Handle Operators and Accessories
4-12
4-13
Switch and Handle—Selection
4-14
Accessories
4-15
Dimensions and Technical Characteristics
4-16
Type VB Panelboard Units
General and Withstand Ratings
Catalog Numbering System
Vacu-Break Fusible Units—Selection
Accessories
4-17
4-18
4-19 – 4-20
4-21
Type HCP Switchboard Units
Selection/Accessories
4-22
Dimensions
4-23
Type TFP Fusible Pullouts—Selection/Dimensions
Residential Commercial Industrial
4-24
DISCONNECT
SWITCHES
Features and Ordering Information
4
Type CFS Compact Fusible Switches
Disconnect Switches
Compact Non-Fusible — Rotary and Toggle
Selection
Features
▪ 25 -100 Ampere, to 50 hp 480V and 600V
▪ Rotary and Toggle actuation models
▪ LBR Type switches are UL & CUL listed
under File No. E191706 as manual motor
controllers per UL Standard UL508
▪ 3LD2 Type switches are UL listed
under File No. E47705 per UL508 and
are CSA certified under File No. 203576
DISCONNECT
SWITCHES
4
▪ Base, 35mm DIN-rail and door mounting
▪ Multiple conductor, distribution terminal
type rating LBR & LBT Type (40A -100A
only)
Type LBR Rotary Switches
Type LBT Toggle Switches
▪ IEC 947-1 rated, CE marked
▪ Listed and marked “suitable as motor
disconnect” per NEC Section 430-109
Short Circuit Withstand Ratings
Switch Rating
& Type
Max. Line Side Fuse Rating
Application
Siemens Load Break Switches are listed
as manual motor controllers and are
suitable as motor disconnects. They are
load break rated and act as enclosure
disconnects when short circuit protection
is provided upstream of the switch. If
upstream over current protection is not
provided, use a Siemens fusible Type
VBII, CFS or MCS Disconnect Switch.
Ordering Information
Door Mounted Switches (Rotary
Type Only) — Order either complete
“3LD2” assemblies or individual “LBR”
components as follows:
Complete Assemblies include switch,
handle, and shaft. Certain 25 and 32A
assemblies are also available with factory
installed neutral blocks and/or aux.
contacts. These accessories can also
be ordered as field installed kits.
Individual Components are ordered as
follows:
25A — LBR3025D switch + LBRH3 or 4
handle.
40 –100A — LBR switch + LBRH3 or 4
handle + LBRD1.
Notes: (LBR Type switches only)
1. Aux contacts are available as field
installed kits on 25A units only.
2. Lugs on 25A units face to the rear and
lugs on 40 –100A units face toward the
front.
왎
Built to order. Allow 6–8 weeks for delivery.
auxiliary contacts (1 NO and 1 NC).
Includes
4-2
5kA with Line Side Class H, K, or
RK5 Fuses
25 & 32A 3LD2
63A 3LD2
3LD2254-0TK51
Base/DIN Rail Mounted Switches
(Rotary or Toggle Type) — Order
80A Max. at 600V AC Max.
175A Max. at 600V AC Max.
10kA with Line Side Class H, K, or
RK5 Fuses
25A LBR
30A Max. at 480V AC Max.
either complete assemblies or individual
components as follows:
40A, 4P
LBR & LBT
60A Max. at 480V AC Max.
Complete Assemblies include switch,
handle, and shaft.
40 & 60A, 3P
LBR & LBT
100A Max. at 480V AC Max.
80 & 100A
LBR & LBT
150A Max. at 480V AC Max.
Individual Components are ordered as
follows:
Toggle — Order the LBT switch required
and a toggle switch cover plate if
needed.
Rotary, Base Mounted with Door
Mounted Handle — Order “LBR” switch
+ door mounted handle + shaft + any
accessories.
18kA with Line Side Class J, T, or
CC Fuses
40 –100A, 3P
LBR & LBT
100A Max. at 480V AC Max.
Note: 3LD2 switches are also rated 5kA at 600V AC
Max. when protected by a 3RV motor starter with a
FLA rating equal to or less than the switch ampere
rating.
Rotary, Base Mounted with Direct
Mounted Handle — Order “LBR” switch
+ direct mounted handle.
3LD Type Door Mounted Complete Assemblies
(Operator, Shaft, & Switch) 600V AC Max.
Shaft Mounted
4 Hole Mounted
AC Horsepower Ratings
Catalog
Number
List
Price $
Catalog
Number
List
Number
Price $ of Poles
3LD2154-0TK_ _
3LD2154-1TP_ _
3LD2154-1TL_ _
3LD2154-2EP__
81.00
106.00
101.00
123.00
3LD2103-0TK_ _ 81.00
3LD2103-1TP_ _ 106.00
3LD2103-1TL_ _ 101.00
3LD2103-2EP_ _ 123.00
3
3
3+N
3 + N
3LD2254-0TK_ _
3LD2254-1TL_ _
3LD2555-0TK_ _
—
—
—
96.00
118.00
155.00
—
—
—
3LD2203-0TK_ _
3LD2203-1TL_ _
3LD2504-0TK_ _
3LD2504-3VK53
3LD2704-0TK_ _
3LD2804-0TK_ _
3
3+N
3
6
3
3
90.00
122.00
155.00
224.00
235.00
300.00
Handles
are IP65 rated and are also UL listed for Type 1, 4X
and 12 applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Ampere
Rating
120V
1Ø
240V 480V
1Ø 3Ø 3Ø
600V
3Ø
25
2
3
71/2
10
15
32
2
3
10
20
20
63
63
100
125
—
—
—
—
10
10
—
—
15
15
30
40
40
40
60
75
50
50
75
100
Add
51 for a black handle or 53 for a red & yellow handle
to the end of the catalog number.
Discount Schedule PILO
Disconnect Switches
Compact Non-Fusible — Rotary and Toggle
Selection
3LD Type Base Mounted Complete Assemblies
(Operator, Shaft, & Switch) 600V AC Max.
Handle Mounting
Shaft (center hole)
4 Hole
Catalog
Number
List
Price $
Catalog
Number
AC Horsepower Ratings
3LD2144-0TK_ _
3LD2144-1TL_ _
138.00
154.00
3LD2113-0TK_ _ 132.00
3LD2113-1TL_ _ 149.00
3
3+N
3LD2244-0TK_ _
3LD2244-1TL53
3LD2545-0TK_ _
—
—
154.00
138.00
207.00
—
—
3LD2213-0TK_ _
3LD2213-1TL53
3LD2514-0TK_ _
3LD2714-0TK_ _
3LD2814-0TK_ _
3
3+N
3
3
3
List
Number
Price $ of Poles
144.00
165.00
171.00
282.00
352.00
Ampere
Rating
120V
1Ø
240V 480V
1Ø 3Ø 3Ø
600V
3Ø
25
2
3
71/2
10
15
32
2
3
10
20
20
63
100
125
—
—
—
10
—
—
15
30
40
40
60
75
50
75
100
Note: Shaft length allows a maximum depth from switch mounting surface to the outside of the cover of 15.25" on 25 &
32A switches and of 15.75" on 63-125A switches.
3LD2213-0TK53
Accessories for Front Mounted 3LD2 Switches
3LD9220-2B
3LD9250-2BA
3LD9280-2B
Neutral/Ground Terminal
Neutral/Ground Terminal
Neutral/Ground Terminal
25 & 32A
63A
100 & 125A
23.00
32.00
39.50
3LD9220-0B
3LD9250-0BA
3LD9280-0B
4th Pole (leading ON, lagging OFF)
4th Pole (leading ON, lagging OFF)
4th Pole (leading ON, lagging OFF)
25 & 32A
63A
100 & 125A
28.50
46.50
57.00
3LD9224-1B
3LD9284-1B
3LD9224-3B
3LD9284-3B
Black Handle (4 hole mtg.)
Black Handle (4 hole mtg.)
Red/Yellow Handle (4 hole mtg.)
Red/Yellow Handle (4 hole mtg.)
25 & 32A
63-125A
25 & 32A
63-125A
15.00
39.50
15.00
39.50
3LD9224-1D
3LD9284-1D
3LD9224-3D
3LD9284-3D
Black Handle (shaft mtg.)
Black Handle (shaft mtg.)
Red/Yellow Handle (shaft mtg.)
Red/Yellow Handle (shaft mtg.)
25 & 32A
63-125A
25 & 32A
63-125A
15.00
39.50
15.00
39.50
3LD9221-2A
3LD9251-2A
3LD9281-2A
3LD9221-0A
3LD9251-0A
Terminal
Terminal
Terminal
Terminal
Terminal
25 & 32A
63A
100-125A
25 & 32A
63A
3.00
3.00
4.60
9.00
10.60
Cover
Cover
Cover
Cover
Cover
1P
1P
1P
3P
3P
(Pack
(Pack
(Pack
(Pack
(Pack
of
of
of
of
of
4)
4)
4)
4)
4)
List
Price $
33.00
57.00
DISCONNECT
SWITCHES
1 NO, 1 NC Aux. Contact
1 NO, 1 NC Aux. with Gold Plated Contacts
Switches
Used With
25-125A
25-125A
Description
4
Catalog
Number
3LD9200-5B
3LD9200-5BF
3LD9220-2C
Accessories for Base Mounted 3LD2 Switches
Catalog
Number
3LD9200-5C
3LD9200-5CF
1 NO, 1 NC Aux. Contact
1 NO, 1 NC Aux. with Gold Plated Contacts
Switches
Used With
25-125A
25-125A
3LD9220-2C
3LD9250-2CA
3LD9280-2C
Neutral/Ground Terminal
Neutral/Ground Terminal
Neutral/Ground Terminal
25 & 32A
63A
100 & 125A
23.00
32.00
39.50
3LD9220-0C
3LD9250-0CA
3LD9280-0C
4th Pole (leading ON, lagging OFF)
4th Pole (leading ON, lagging OFF)
4th Pole (leading ON, lagging OFF)
25 & 32A
63A
100 & 125A
28.50
46.50
57.00
3LD9224-1B
3LD9284-1B
3LD9224-3B
3LD9284-3B
Black Handle (4 hole mtg.)
Black Handle (4 hole mtg.)
Red/Yellow Handle (4 hole mtg.)
Red/Yellow Handle (4 hole mtg.)
25 & 32A
63-125A
25 & 32A
63-125A
15.00
39.50
15.00
39.50
3LD9224-1D
3LD9284-1D
3LD9224-3D
3LD9284-3D
Black Handle (shaft mtg.)
Black Handle (shaft mtg.)
Red/Yellow Handle (shaft mtg.)
Red/Yellow Handle (shaft mtg.)
25 & 32A
63-125A
25 & 32A
63-125A
15.00
39.50
15.00
39.50
3LD9221-2A
3LD9251-2A
3LD9281-2A
3LD9221-0A
3LD9251-0A
Terminal
Terminal
Terminal
Terminal
Terminal
25 & 32A
63A
100-125A
25 & 32A
63A
3.00
3.00
4.60
9.00
10.60
Description
Handles
Cover
Cover
Cover
Cover
Cover
1P
1P
1P
3P
3P
(Pack
(Pack
(Pack
(Pack
(Pack
and line side terminal covers are supplied as
standard with 3LD2 switches.
suffix 51 for a black handle or 53 for a red & yellow
handle to the catalog number. Handles are 1P65 rated and
are also UL listed for Type 1, 4X & 12 applications.
Add
Discount Schedule PILO
of
of
of
of
of
4)
4)
4)
4)
4)
Add
List
Price $
33.00
57.00
51 for a black handle or 53 for a red & yellow handle to
the end of the catalog number.
3LD9251-0A
Aux.
contacts break about 30 Ms before and make about 3
Ms after main switch contacts.
Ratings
10A
at 120V AC
6A
at 240V AC
1.4A
at 480V AC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-3
Disconnect Switches
Compact Non-Fusible — Rotary and Toggle
Selection
Individual Components
Rotary and Toggle Switches
Catalog
Number
LBR3025
LBR3025D
LBR3040
LBR3060
LBR3080
LBR3100
LBR4040
LBT3040
LBT3060
LBT3080
LBT3100
LBT4040
Switch
Type
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary
Toggle
Toggle
Toggle
Toggle
Toggle
AC Horsepower Ratings
Max
No. of Ampere AC 115V 240V
480V
600V
Poles Rating Volt 1Ø
1Ø 3Ø 3Ø
3Ø
3
3
25
480
⁄4
2
5
10
—
3
3
25
480
⁄4
2
5
10
—
1
3
40
600 2
3 7 ⁄2 20
25
3
60
480 2
5 10
25
—
3
80
600 3
10 20
40
50
3
100
480 5
15 25
50
—
4
40
480 2
3 71⁄2 20
—
25
3
40
600 2
3 71⁄2 20
3
60
480 2
5 10
25
—
3
80
600 3
10 20
40
50
3
100
480 5
15 25
50
—
4
40
480 2
3 71⁄2 20
—
List
Price $
99.00
108.00
118.00
141.00
169.00
208.00
184.00
118.00
141.00
169.00
208.00
184.00
Standard Duty Rotary
Switch Door Handles
Heavy Duty Rotary
Switch Door Handle
DISCONNECT
SWITCHES
4
LBR Type Handles
Catalog
Number
Standard Duty
LBRH2
LBRH3
LBRH4
LBRH9
LBRH10
LBRH5
LBRH6
LBRH7
LBRH8
Heavy Duty
CFSH10B12
CFSH10R12
Used on
Rotary Switches
NEMA
Type
All
All
All
All (Pistol Grip Type)
All (Pistol Grip Type)
25 Amps
3-Pole, 40-60 Amps
3-Pole, 80-100 Amps
4-Pole, 40-60 Amps
1
1,
1,
1,
1,
1
1
1
1
All
All
1, 3R, 12
1, 3R, 12
3R,
3R,
3R,
3R,
12,
12,
12,
12,
4X
4X
4X
4X
Mounting
Marking
Color
Cover
Interlock
Supplied
Door
Door
Door
Door
Door
Direct
Direct
Direct
Direct
ON/OFF
O/I, ON/OFF
O/I, ON/OFF
O/I, ON/OFF
O/I, ON/OFF
O/I
O/I
O/I
O/I
Black
Black
Red/Yel
Black
Red/Yel
Black
Black
Black
Black
No
Yes
Yes
Yes
Yes
—
—
—
—
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
34.50
51.00
51.00
130.00
130.00
16.10
21.00
21.00
21.00
O/I, ON/OFF
O/I, ON/OFF
Black
Red/Yel
Yes
Yes
Yes
Yes
137.00
137.00
Mount
Mount
Mount
Mount
Door
Door
Padlockable
List
Price $
LBR Type Rotary Shafts
Catalog No
Length In. (mm)
For Standard Duty Handles
LBRS040
1.57 (40)
LBRS050
1.97 (50)
LBRS055
2.17 (55)
LBRS080
3.15 (80)
LBRS120
4.72 (120)
LBRS180
7.09 (180)
LBRS305
12.00 (305)
For Heavy Duty Handles
CFSS5200H 7.9 (200)
CFSS5400H 15.7 (400)
List Price $
16.10
21.00
21.00
24.00
27.00
31.50
34.50
34.00
36.00
Rotary Shafts
LBR 25 Amp, 4th Pole
Used on Catalog No Catalog No
LBR3025
LBRP25
LBR3025D
LBRP25D
List Price $
68.00
76.00
LBT Type Toggle Switch Cover Plate
LBR Auxiliary Switch Kits
Used on
Rotary Switch
LBR3025
LBR3025D
LBR3040,
LBR3060
LBR3080,
LBR3100
Catalog
Number
LBRA25
LBRA25D
LBRA1
LBRA2
Contact Arrangement
1 NO/1 NC
1 NO/1 NC
1 NO/1 NC
with common point
1 NO/1 NC
with common point
List
Price $
51.00
51.00
59.00
65.00
Used on
Toggle Switches
LBT3040, LBT3060
LBT3080, LBT3100
LBT4040
cover interlock defeat mechanism provided. To
eliminate cover interlock, order additional catalog
number LBRDC1.
LBRH2 is IP54 rated. All others are IP65.
Ratings
15.1A resistive at 250V AC max.
.5A at 125V DC
.25A at 250V DC
.5 HP at 250V AC max.
4-4
Catalog Number
LBTCP1
LBTCP2
LBTCP3
List
Price $
25.50
27.00
30.50
LBR Type Rotary Switch Door Mounting Kit
(For use with LBRH3 & LBRH4 only)
Used on
Rotary Switch
Catalog Number
40-100 Amps
LBRD1
List
Price $
59.00
LBR/LBT Neutral Kit
Used with
Catalog Number
All
No
Toggle Switch Cover
Plates
Rotary Switch Direct
Mount Handles
Auxiliary
switch contacts break about 30 Ms before and
make about 3 Ms after main switch contacts. Cannot be
used with LBRD1 door mounting kit.
Lug wire ranges:
HF63CX —(1) #14-2 AWG 60/75°C Cu only
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Number
HF63CX
List
Price $
76.00
Only
door mountable and for use with LBRH3 &
4 handles only.
door mounting of 40–100A LBR switches use
door mounting kit LBRD1 & LBRH3 or 4 handle.
For
Discount Schedule HDSS
Disconnect Switches
Compact Non-Fusible — Rotary and Toggle
Dimensions
Dimension Drawings and Wire Ranges
Dimension J Minimum Dept h햲
3.15 in.
(80 mm)
Switch
1.38 in.
(35 mm)
2.92 in.
(74 mm)
1.77 in.
(45 mm)
0.20 in.
(5 mm)
0.87 in.
(22 mm)
1.54 in.
(39 mm)
Dimension J
LBR 40-100A
3.35 (85)
3LD2 25 & 32A Front Shaft Mounted
3LD2 63 Front Shaft Mounted
3LD2 25 &32A Front 4-hole Mounted
3LD2 63A Front 4-hole Mounted
3LD2 100 & 125A Front 4-hole Mounted
3.07 (78)
3.35 (85)
2.13 (54)
2.48 (63)
2.56 (65)
3LD2 25 & 32A Base w/shaft Mtg. Handle
3LD2 63A Base w/shaft Mtg. Handle
3LD2 25 & 32A Base w/4-hole Mtg. Handle
3LD2 63A Base w/4-hole Mtg. Handle
3LD2 100 & 125A Base w/hole Mtg. Handle
6.46 (164)
6.77 (172)
5.59 (142)
5.99 (152)
6.07 (154)
0.71 in.
(18 mm)
J
2.24 in.
(57 mm)
1.42 in.
(36 mm)
햲
C
A
E
F
0.16 in.
(4 mm)
햲
B
LBR 3025
H
0.31 in.
(8 mm)
Wire Ranges 60/75°C Cu only
25 Amps LBR
(1) #14 - #10 AWG Solid
(1) #14 - #8 AWG Stranded
40 & 60 Amps
LBR & LBT
(1) #14 - #10 AWG Solid
(1) #14 - #4 AWG Stranded
UP to (4) #12 AWG Solid
Up to (3) #12 AWG Stranded
Up to (6) #14 AWG Stranded
Up to (4) #14 AWG Stranded
with (1) #10 AWG Stranded
80 & 100 Amps
LBR & LBT
25A, 3LD21
32A, 3LD22
63A, 3LD25
100, 125A, 3LD2
G
DISCONNECT
SWITCHES
3.35 in.
(85 mm)
Minimum Depth
D
4
2.76 in.
(70 mm)
(1) #14 - #10 AWG Solid
(1) #14 - #1 AWG Stranded
(2) #6 AWG Stranded
Up to (3) #8 AWG Stranded
Up to (6) #10 AWG Stranded
Up to (6) #12 AWG Solid
(1)
(1)
(1)
(1)
#14-8
#14-8
#14-6
#12-1
Drilling
Pattern
.125
(3.2)
LBR 40-100 Amps & 3LD2 25-125A
3.00 in.
(76 mm)
Minimum Depth
.95
(24.1)
C
.877
(22.5)
A
E
F
D
Shaft Mounted
3LD2 Handle Cutout
0.16 in.
(4 mm)
G
B
AWG
AWG
AWG
AWG
H
0.31 in.
(8 mm)
LBT Toggle — 40-100 Amps
Switch
Type
Dimensions Inches (mm)
Switch
Catalog Number A
B
C
Rotary
Rotary
Rotary
Rotary
Rotary
Rotary Front Mtg.
Rotary Front Mtg.
Rotary Front Mtg.
LBR3040
LBR3060
LBR3080
LBR3100
LBR4040
3LD21 & 2 햳
3LD25 햳
3LD27 & 8
2.00
2.00
2.09
2.09
2.42
1.81
2.36
2.40
2.72
2.72
2.92
2.92
2.72
1.97
2.32
2.40
Rotary Base Mtg.
Rotary Base Mtg.
Rotary Base Mtg.
3LD21 & 2
3LD25
3LD27 & 8
1.81 (46)
2.36 (60)
2.80 (71)
2.17 (55)
2.52 (64)
3.27 (83)
2.29 (58)
2.68 (68)
2.76 (70)
—
—
—
Toggle
Toggle
Toggle
Toggle
Toggle
LBT3040
LBT3060
LBT3080
LBT3100
LBT4040
2.00
2.00
2.09
2.09
2.42
2.72
2.72
3.32
3.32
2.72
2.75
2.75
2.90
2.90
2.75
1.78
1.78
1.97
1.97
2.28
햲 Depth
from outside of cover to back of switch.
(51)
(51)
(53)
(53)
(61)
(46)
(60)
(61)
(51)
(51)
(53)
(53)
(61)
2.72
2.72
3.32
3.32
2.72
2.17
2.52
3.27
(69)
(69)
(84)
(84)
(69)
(55)
(64)
(83)
(69)
(69)
(84)
(84)
(69)
D
(69)
(69)
(74)
(74)
(69)
(50)
(59)
(61)
(70)
(70)
(74)
(74)
(70)
1.78
1.78
1.97
1.97
2.28
—
—
—
E
(45)
(45)
(50)
(50)
(58)
2.16
2.16
2.29
2.29
2.16
—
—
—
F
(55)
(55)
(58)
(58)
(55)
—
—
—
(45)
(45)
(50)
(50)
(58)
2.16
2.16
2.29
2.29
2.16
1.67
1.67
1.69
1.69
1.67
—
—
—
G
(42)
(42)
(42)
(42)
(42)
—
—
—
(55)
(55)
(58)
(58)
(55)
1.67
1.67
1.69
1.69
1.67
1.50
1.50
1.66
1.66
1.50
—
—
—
H
(38)
(38)
(42)
(42)
(38)
—
—
—
(42)
(42)
(42)
(42)
(42)
1.50
1.50
1.66
1.66
1.50
1.22
1.22
1.66
1.66
1.22
—
—
—
(31)
(31)
(42)
(42)
(31)
—
—
—
(38)
(38)
(42)
(42)
(38)
1.22
1.22
1.66
1.66
1.22
(31)
(31)
(42)
(42)
(31)
햳 Handle
front plate dimensions:
3LD21 & 2—2.64 inches square
3LD25, 7 & 8—3.55 inches square
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-5
Disconnect Switches
Type VBII (30-600A) with Flange Mounted Operating Handle Features and Ordering Information
Features
▪ Short circuit rating of 10,000 AIC with
class H fuse, and of 200,000 AIC with
class R or J fuses
▪ Flange mounted handles are Type 1
and 12 rated and padlockable in the off
position with up to (3) padlocks with
5/16 hasps 햲
▪ Meets UL98 requirements and suitable
for both main and branch circuit applications
▪ A complete line of aux contacts are
available
▪ Load break and horsepower rated
▪ Defeatable cover interlock standard
with all handles
▪ Meets NFPA79 requirements
DISCONNECT
SWITCHES
4
▪ 30-600A, 600VAC and DC ratings
▪ UL Recognized (file # E121152 vol. 3)
and CSA Certified under file number
154852
▪ Visible blade quick make and break
switching action
▪ Panel and Flange mounted assemblies
facilite installation
▪ Panel mounted switches are variable
depth
VBFS361, VBLK1 & VBH1
VBFS363F
VBNFS365, VBLK4 & VBH2
Ordering Information
1. Determine the ratings required (amps,
volts, HP, Fusible, NF), the mounting
needed (Panel or Flange), and select
the appropriate switch.
햲
2. For panel mounted switches with a
rigid operating shaft (30-600A), order
panel mounted switch flange mounted
operating handle & rigid linkage kit
based on depth required.
3. For panel mounted switches with a
Max-Flex operator, order panel mounted switch, Max-Flex Handle & Adapter
Kit and drive cable.
30-200A handles are also rated Type 3R & 4X.
4-6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4. Select accessories if required.
Disconnect Switches
Type VBII (30-600A) with Flange Mounted Operating Handle
Selection
Switches
Switch
Ampere
Rating
Horsepower Rating, Switches and 3-Phase햵
Max. AC
Voltage
Rating
240 Volts AC
Catalog
Number
Standard
480 Volts AC
Max.
Standard
600 Volts AC
Max.
Standard
Max.
600
Volts DC
(max)햵
List
Price $
Fusible Panel Mounted Variable Depth Switches - 3-Pole햶햸
30
60
30
60
100
200
400
600
240
240
600
600
600
600
600
600
VBFS321
VBFS322
VBFS361
VBFS362
VBFS363
VBFS364
VBFS365
VBFS366
3
7 1/2
—
—
—
—
—
—
7 1/2
15
—
—
—
—
—
—
—
—
5
15
25
50
100
150
—
—
15
30
60
125
250
400
—
—
7 1/2
15
30
60
125
200
—
—
20
50
75
150
350
500
—햲
—햳
15 햴
30 햴
50 햴
50
50 햴
50 햴
582.00
670.00
605.00
710.00
1327.00
2446.00
4649.00
7098.00
햴
Non-fusible Panel Mounted Variable Depth Switches - 3-Pole햶
30
60
100
200
400
600
600
600
600
600
600
600
VBNFS361
VBNFS362
VBNFS363
VBNFS364
VBNFS365
VBNFS366
—
—
—
—
—
—
10
20
40
60
125
200
—
—
—
—
—
—
20
50
75
125
250
400
—
—
—
—
—
—
30
60
100
150
300
500
15
30
50
50
50
50
햴
529.00
605.00
1074.00
1813.00
3446.00
5261.00
3
7 1/2
—
—
—
—
7 1/2
15
—
—
—
—
—
—
5
15
50
100
—
—
15
30
60
125
—
—
7 1/2
15
30
60
—
—
20
50
75
150
—햲
—햳
15 햴
30 햴
50 햴
50
851.00
940.00
875.00
981.00
1597.00
2718.00
10
20
40
60
—
—
—
—
20
50
75
125
—
—
—
—
30
60
100
150
15
30
50
50
햴
798.00
875.00
1344.00
2084.00
햴
햴
햴
Fusible Flange Mounted Switches - 3-Pole햷
VBFS321F
VBFS322F
VBFS361F
VBFS362F
VBFS363F
VBFS364F
Non-fusible Flange Mounted Switches - 3-Pole햷
30
60
100
200
600
600
600
600
VBNFS361F
VBNFS362F
VBNFS363F
VBNFS364F
—
—
—
—
햴
햴
Note: Fusible switches include fuse provisions for Class H Fuses. The load base can be moved to pre-drilled holes for Class J Fuses. If Class R Fuses are required add
a Class R Fuse Clip Kit.
Flange Mounted Operating Handles
Cable Kit
For use with Panel Mounted Switches. Included with Flange
Mounted Switches as standard.
For use with 30-200A panel mounted switches and Max-Flex
handle and adapter kit.
Catalog
Number
Handle Assembly
Description
List
Price $
Catalog
Number
Description
List
Price $
VBH1
30-200A Type 1, 3R & 12
240.00
FHOEC036
36" long drive cable
153.00
VBH14X
30-200A Type 4X
399.00
FHOEC048
48" long drive cable
182.00
VBH2
400 Type 1 & 12
476.00
VBH2R
400 & 600A Type 1, 3R & 12
560.00
VBH24X
400 & 600A Type 4X
760.00
Rigid Linkage Kits
For use with Panel Mounted Switches. Not required for Flange
Mounted Switches.
Catalog
Number
Switch
Ampere
Rating
VBLK1
VBLK2
30-200
30-200
6.94햹
6.94햹
6.94햹
19.0
29.50
35.00
VBLK3
VBLK4
400 & 600
400 & 600
9.00
9.00
8.75
19.0
46.50
54.00
Enclosure Depth햸
Min
Max.
List
Price $
Max-FlexTM Handle and Adapter Kit
(Type 1, 12, 3R & 4X)
Use with 30-200A panel mounted switches and cable kit.
Catalog
Number
Description
List
Price $
VBHM1
30-200A Max-Flex Adapter Kit
424.00
햲
Rated 5 HP at 250V DC.
Rated 10 HP at 250V DC.
600V DC & 600V DC horsepower rating shown requires
(2) poles to be connected in series.
햵 Std. - applies when non-time delay fuses are used.
Max. - applies when time delay fuses are used.
햳
햴
Discount Schedule HDSS
햶
VBNFS361, VBHM1 & FHOEC036
Includes line base, load base, operating mechanism
and line and load lugs. Order operating handle and
linkage kits from tables on this page.
햷 Includes line base, load base, operating mechanism
line and load lugs operating handle and required
linkage.
햸
Dimensions (min. & max.) from enclosure mounting
pan to outside surface of enclosure handle mounting
flange.
햹 7.12 for 200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-7
DISCONNECT
SWITCHES
240
240
600
600
600
600
4
30
60
30
60
100
200
Disconnect Switches
Type VBII (30-600A) with Flange Mounted Operating Handle
Accessories
HT63
HR612
HN612
Class R Fuse Clip Kits
Class T Fuse Adapter Kits
200% Neutral Kits
These kits prevent the installation of
Class H and K fuses (one kit required per
switch).
100-600A fusible switches are field
convertible to accept Class T fuses.
400-600A switches are field convertible
to accept Class T fuses by moving the
load base to a pre-drilled T fuse
position.
UL listed 200% Neutrals are available on
60 & 100A switches. They are typically
used with non-linear transformers or
where increased neutral ampacity/lug
capacity is required.
4
Catalog
Number
DISCONNECT
SWITCHES
Class R Fuse Clip Kits
HR21
83.00
30A, 240V Kit (HD only)
HR612
83.00
30A, 600V Kit/60A, 240V Kit
HR62
83.00
60A, 600V Kit
Catalog
Number
HR63
54.00
100A Kit
HT23
76.00
100A, 240V Kit
HR64
54.00
200A Kit
HT63
120.00
100A, 600V Kit
HR656
137.00
400A/600A Kit
HT24
102.00
200A, 240V Kit
HT64▲
143.00
200A, 600V Kit
List
Price $
Description
Class T Fuse Adapter Kits햲
List
Price $
Description
Class J Fuse Provisions
Neutral Kits
All 30-600A, 600V fusible switches are
field convertible to accept Class J fuses
by moving the load base to a pre-drilled
J fuse position.
Standard Neutral Kits can be field
installed in 30-100A switches.
200% Neutral Kits
Switch
Ampere
Rating
100
Kit
Catalog List
Number Price $
HN263
225.00
Wire Range
Line & Load
Lugs (Cu/Al)
(2) #14-1/0 AWG
Neutral Kits
Switch
Ampere Rating
30A 600V, 60A 240V
Kit Catalog
Number
HN612
60A, 600V & 100A
HN623
List Price $
97.00
186.00
Internal Door Latch Kits
For use with enclosures with door
mounted latching bar. Required when a
flange mounted switch is mounted in a
Hoffmann or Rittal enclosure provided
with an AB cutout.
Catalog
Number
Description
List
Price $
DKR2
2 point (for use with
enclosures less than 40" high)
338.00
DKR3
3 point (for use with
enclosures 40" or larger
in height)
377.00
Window Kits (Type 1, 12, 3R and 4x)
Allows viewing of visible blades and of
indicating fuses through 200A.
Catalog
Number
Description
List
Price $
VBWK1
30A Window Kit
109.00
VBWK2
60 & 100A Window Kit
118.00
VBWK3
200-600A Window Kit
123.00
▲ Built to order. Allow 6–8 weeks for delivery.
햲 One kit per pole required.
4-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule HDSS
Disconnect Switches
Type VBII (30-600A) with Flange Mounted Operating Handle
Accessories
Auxiliary Contacts
The auxiliary contacts are available in 1 normally open and 1 normally closed
or 2 normally open and 2 normally closed configurations. Siemens offers a
PLC Auxiliary Switch (30 -200A) that has very low resistance for low voltage
and current typical in PLC circuits. All auxiliary contacts make after and break
before main switch contacts.
HA161234
Switch
Ampere
Rating
Kit Ampere Rating
Aux. Switch
Catalog
List
Number
Price $
125V AC
Max.
250V AC
Max.
Kit Horsepower Rating
28V DC 125V AC
Max.
Max.
250V AC
Max.
28V DC
Max.
With 1 NO & 1 NC Isolated Contacts
30-200
HA161234
239.00
10
10
—
1/2
3/4
—
400-600
HA165678
587.00
10
10
—
1/2
3/4
—
With 2 NO & 2 NC Isolated Contacts
30-200
HA261234
266.00
10
10
7
1/2
3/4
—
400-600
HA265678
614.00
10
10
7
1/2
3/4
—
Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts
HA361234
302.00
10
10
—
1/2
3/4
—
HA365678
643.00
10
10
—
1/2
3/4
—
4
30-200
400-600
DISCONNECT
SWITCHES
HA261234
Fuse Puller Kits
Fuse Puller Kits are field installable in 30-100A Type VBII Heavy Duty
Switches (one kit required per 3-pole switch).
Switch
Ampere
Rating
030
Fuse Puller Kit
Catalog Number
HP61
List Price $
21.00
060
HP62▲
21.00
100
HP63▲
21.00
HP61
Copper Lug Kits
All switches are UL approved to accept field installed copper lug kits.
Switch
Ampere
Rating
30–60
Copper Lug
Catalog
List
Number
Price $ Description
HLC612
138.00 (9) Lugs/Kit #14-4 AWG Cu
100
HLC63▲
172.00 (9) Lugs/Kit #14-1/0 AWG Cu
200
HLC64▲
212.00 (9) Lugs/Kit #6 AWG-300 Kcmil Cu
400–600A HLC65678
37.50 (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu
Equipment Ground Kits
Equipment Ground Lug Kits are available for all switches.
HLC612
Switch
Ampere
Rating
30–200
Catalog
Number
HG61234
400 & 600
HG656
List
Price $
24.00
123.00
Number of
Terminals
2
Wire Range
Per Terminal (Cu/Al)
#14-4 AWG
4
#6 AWG-250 Kcmil
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule HDSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-9
Disconnect Switches
Type VBII (30-600A) with Flange Mounted Operating Handle
Lug Wire Ranges & Dimensions
Lugs
30 & 60A switches are suitable for use with 60° or 75°C wire. 100–600A
switches are suitable for use with 75°C rated wire. All switches are supplied
with factory installed line and load lugs.
Wire Ranges (Line, Load and Standard Neutral)
Switch
Ampere
Rating
30
60
UL Approved Wire Range
Lug Wire Range
#14-6 AWG (Cu/AI)
#14-2 AWG (Cu/Al)
#14-2 AWG (Cu/AI)
#14-2 AWG (Cu/Al)
#14-1/0 AWG (Cu/Al)
#14-1/0 AWG (Cu/Al)
200
#6 AWG-300 Kcmil (Cu/Al)
#6 AWG-300 Kcmil (Cu/Al)
400
1/0 AWG-750 Kcmil (Cu/Al) or
(2) 1/0 AWG-250 Kcmil (Cu/Al)
(1) 1/0 AWG-750 Kcmil (Cu/Al) or
(2) 1/0 AWG-250 Kcmil (Cu/Al)
600
(2) 1/0 AWG-750 Kcmil (Cu/Al) or
(4) 1/0 -250 Kcmil (Cu/Al)
(2) 1/0 AWG-750 Kcmil (Cu/Al) or
(4) 1/0 AWG-250 Kcmil (Cu/Al)
DISCONNECT
SWITCHES
4
100
Approximate Dimensions
Mounting bracket shown with handle installed is supplied
with Flange Mounted Switches only. All Panel Mounted
Switches have a “L” shaped mounting pan with a line base,
load base (if fusible) and mechanism installed.
Catalog
Number
A
Fusible, Panel Mounted
B
Dimensions
C
D (min)
D (max)
VBFS321
11.88
N/A
6.62
6.81
19
VBFS322
13.12
N/A
8.50
6.81
19
VBFS361
11.88
N/A
6.62
6.81
19
VBFS362
13.12
N/A
8.50
6.81
19
VBFS363
13.12
N/A
8.50
6.81
19
VBFS364
17
N/A
12.33
7.05
19
VBFS365
26.25
N/A
16.50
8.63
19
VBFS366
26.25
N/A
16.50
8.63
19
B A
Non-fusible, Panel Mounted
VBNFS361
9.79
N/A
6.62
6.81
19
VBNFS362
9.79
N/A
8.50
6.81
19
VBNFS363
9.79
N/A
8.50
6.81
19
VBNFS364
10.77
N/A
12.33
7.05
19
VBNFS365
13
N/A
16.50
8.63
19
VBNFS366
13
N/A
16.50
8.63
19
Fusible, Flange Mounted
D
VBFS321F
11.88
14.06
7.00
7.27
N/A
VBFS322F
13.12
15.83
8.85
7.27
N/A
VBFS361F
11.88
14.06
7.00
7.27
N/A
VBFS362F
13.12
15.83
8.85
7.27
N/A
VBFS363F
13.12
15.83
8.85
7.27
N/A
VBFS364F
17
18.20
12.68
7.57
N/A
Non-fusible, Flange Mounted
VBNFS361F
9.79
11.78
7.00
7.27
N/A
VBNFS362F
9.79
11.78
8.85
7.27
N/A
VBNFS363F
9.79
11.78
8.85
7.27
N/A
VBNFS364F
10.77
12.00
12.68
7.57
N/A
Dimension
C for panel mounted switches indicates the minimum width from the left
hand edge of the switch mounting pan to the right hand inside surface of the enclosure.
4-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
C
Disconnect Switches
Type MCS (30-200A) — Switches, Fuse and No Fuse Kits
Selection
Features
▪ Compact Size
▪ Visible Blade Contacts
▪ Rugged Construction — with a short
circuit current rating of 10,000 amps
with Class H or 200,000 amps at 600V
maximum AC, when fused with Class
R or Class J fuses
▪ Available with three operator handle
options, allowing flexible placement
of switch
▪ Field Installable Auxiliary Contacts
▪ Flexible Fuse Class Configurations
▪ Flange mounted handles meet NFPA79
requirements
Type MCS Disconnect Switch with
Max-Flex™ handle operator
Type MCS Disconnect Switch with
fixed-depth, flange-mounted handle
Type MCS Disconnect Switch with
rotary handle
1. Select the basic switch size you need
(30, 60, 100 or 200 ampere).
2. Check the switch selected against the
maximum horsepower rating required
for your application. “L” or “R” suffix on
4-12 for installation space requirements.
5. Select from the list of handle operators,
the type which best suits your
application. Handle operators can be
selected from the next page.
switch catalog numbers denotes left or
right-handed mechanism drive.
3. Choose either fuse or no fuse kit from
chart below.ng Information
4. Check “Minimum Dimensions” on page
Basic Switches
Maximum Horsepower Rating, 3 Phase햵
Maximum
Voltage
Rating
Catalog
Number
Right
Hand
Catalog
Number
Left
Hand
240 Volts AC
Switch
Ampere
Rating
130
600
MCS603R
160
600
MCS606R
100
600
MCS610R
200
600
MCS620R
480 Volts AC
Standard
Fuse
Time
Delay
Fuse
MCS603L
13
MCS606L
171⁄2
600 Volts AC
250
Volts
DC
(max)햵
List
Price $
120
15
464.00
150
10
534.00
30
175
20
996.00
60
150
40
1607.00
Standard
Fuse
Time
Delay
Fuse
Standard
Fuse
Time
Delay
Fuse
171⁄2
15
115
171⁄2
15
15
130
15
MCS610L▲ 15
30
25
160
MCS620L▲ 25
60
50
125
Fuse And No Fuse Kits (Includes load base plus line and load fuse clips)햲
Basic
Switch
Ampere
Rating
No Fuse Kits
Switch
Catalog
Number
For Class H
Cu Only햳
Standard
Std
List
Price $
햲
Std
List
Price $
Lug
Wire
Size
—
—
FCJK603
—
FCJK606
—
—
98.00
—
127.00
—
FCRK203
FCRK206
FCRK206
FCRK606
—
98.00
119.00
119.00
154.00
#14 to
#4 AWG
Cu/AI
—
—
FCK206
87.00
FCK606
127.00
OFCK661▲ 294.00
OFCK661▲ 294.00
—
—
—
—
FCJK606
127.00
OFCK661▲ 294.00
OFCK661▲ 294.00
—
FCRK206
FCRK606
—
119.00
154.00
—
—
#14 to
#4 AWG
Cu/AI
—
FCK610
FCK610
OFCK620
OFCK620
—
296.00
296.00
562.00
562.00
—
FCK610
FCK610
OFCK620
OFCK620
—
296.00
296.00
562.00
562.00
—
FCK620
FCK620
—
730.00
730.00
—
FCK620
FCK620
—
730.00
730.00
Catalog
Number
130
No Fuse
MCS603R 30A, 250V
or
30A, 600V
MCS603L 60A, 250V
60A, 600V
TMK606
—
—
—
—
15.10
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
FCK203▲
FCK206
FCK206
FCK606
160
No Fuse
MCS606R 60A, 250V
or
60A, 600V
MCS606L 100A, 250V
100A, 600V
TMK606
—
—
—
—
15.10
—
—
—
—
—
—
—
—
—
—
—
—
—
—
No Fuse
MCS610R 100A, 250V
or
100A, 600V
MCS610L 200A, 250V
200A, 600V
TMK610
—
—
—
—
37.50
—
—
—
—
TMK610C
—
—
—
—
74.00
—
—
—
—
No Fuse
MCS620R 200A, 250V
or
200A, 600V
MCS620L
TMK620
—
—
77.00
—
—
TMK620C▲ 156.00
—
—
—
—
▲ Built to order. Allow 6–8 weeks for delivery.
햲 For “copper only” connectors, order as follows:
Fusible—order standard switch, standard fuse kit and copper only no fuse kit.
Discount Schedule HDSS
햳
햲
Std
List
Price $
—
67.00
87.00
87.00
127.00
Non-Fusible—order standard switch and copper only no
fuse kit.
Includes both line and load lugs.
Catalog
Number
For Class R
햲
List
Price $
200
List
Price $
Catalog
Number
Catalog
Number
100
Kit
Description
For Class J
햴
햵
Catalog
Number
햴
햴
—
햴
햴
햴
햴
—
햴
햴
—
—
—
—
—
—
—
—
#14 to
#2/0 AWG
Cu/AI
#6 to
300 kcmil
Cu/AI
For Class R fuses order Class H kit from this table and the
Class R conversion kit from the next page.
HP ratings for time delay fuses and for 250V DC also
apply to Non-fusible switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-11
DISCONNECT
SWITCHES
Ordering Information
4
▪ 30, 60, 100 and 200 Ampere Switches
▪ UL Recognized (file # E121152 vol. 1 &
2) and CSA Certified
▪ Simple Mounting — with an integral
switch and over center mechanism
▪ Horsepower & load break rated
Disconnect Switches
Type MCS (30-200A)
Accessories
Auxiliary Switch Kits
Class R Fuse Conversion Kits
Contact Arrangement
1 NO/1 NC
2 NO/2 NC
Switch
Catalog
Number
Catalog
Number
List
Price $
Catalog
Number
List
Price $
MCS603R
MCS603L
MCS606R
MCS606L
MCS610R
MCS610L
MCS620R
MCS620L
MCSAKR136
MCSAKL136
MCSAKR136
MCSAKL136
MCSAK116
MCSAK116
MCSAK126
MCSAK126
347.00
347.00
347.00
347.00
348.00
348.00
398.00
398.00
MCSAKR236
MCSAKL236▲
MCSAKR236
MCSAKL236▲
MCSAK216
MCSAK216
MCSAK226
MCSAK226
602.00
602.00
602.00
602.00
603.00
603.00
802.00
802.00
Fuse Clip
Rating
Catalog
Number
List
Price $
100A, 600V
200A, 600V
SSRK33
SSRK34
54.00
54.00
Fuse Ejector Kits
Handle Operators
Switch
Catalog
Number
Fuse
Ejector Kit
Catalog
Number
List
Price $
MCS610
MCS620
FE100▲
FE200▲
23.00
35.50
DISCONNECT
SWITCHES
4
Fixed Depth, Flange Mounted, Types 1, 3, 3R, 12
Switch
Catalog
Number
Complete Handle Mechanism
Handle Only
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Switch Operator Only
Catalog
Number
List
Price $
MCS603R
MCS603L
MCS606R
MCS606L
MCS610R
MCS610L
MCS620R
MCS620L
FDFS06R
FDFS06L
FDFS06R
FDFS06L
FDFS06R
FDFS06L
FDFS20R
FDFS20L
317.00
317.00
317.00
317.00
317.00
317.00
415.00
415.00
FDH10
FDH10
FDH10
FDH10
FDH10
FDH10
FDH20
FDH20
252.00
252.00
252.00
252.00
252.00
252.00
247.00
247.00
FDS06R
FDS06L
FDS06R
FDS06L
FDS06R
FDS06L
FDS20R
FDS20L
65.00
65.00
65.00
65.00
65.00
65.00
168.00
168.00
Variable Depth, Flange Mounted Max-Flex™, Types 1, 3, 3R, 12
Switch
Catalog
Number
Complete Handle Mechanism
Handle Only
Switch Operator Only
Cable Only
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
MCS603R
MCS603L
MCS606R
MCS606L
MCS610R
MCS610L
MCS620R
MCS620L
FHOS06036R
FHOS06036L
FHOS06036R
FHOS06036L
FHOS06036R
FHOS06036L
FHOS20036R
FHOS20036L
625.00
625.00
625.00
625.00
625.00
625.00
710.00
710.00
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS
311.00
311.00
311.00
311.00
311.00
311.00
311.00
311.00
FHOS06R
FHOS06L
FHOS06R
FHOS06L
FHOS06R
FHOS06L
FHOS20R
FHOS20L
161.00
161.00
161.00
161.00
161.00
161.00
222.00
222.00
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOJC036
FHOJC036
153.00
153.00
153.00
153.00
153.00
153.00
177.00
177.00
RHOS06
RHOS06
RHOS06
RHOS20
76.00
76.00
76.00
125.00
Variable Depth Rotary, Through-The-Door-Mounted, Types 1, 12
Variable Depth
MCS603R
MCS606R
MCS610R
MCS620R
Shaft Only Variable Depth
CRHOS06VD
CRHOS06VD
CRHOS06VD
CRHOS20VD
158.50
158.50
158.50
207.50
CRHOH
CRHOH
CRHOH
CRHOH
51.00
51.00
51.00
51.00
RHOSVD
RHOSVD
RHOSVD
RHOSVD
31.50
31.50
31.50
31.50
MCS Disconnect Switch Panel Space Requirements
Panel Space Requirements
Minimum Dimensions (inches*)
Switch
Catalog
Number Size
30A/240V
MCS603 30A/600V
30A/600V
60A/240V
MCS606 60A/600V
60A/600V
100A/240V
MCS610 100A/600V
100A/600V
200A/240V
MCS620 200A/600V
200A/600V
▲ Built to order. Allow 6–8 weeks for delivery.
For Type 4 and 4X applications, order handle only
Catalog Number
100A - FDH104 (list price $354.00)
200A - FDH204 (list price $349.00)
For Type 4 and 4X applications, order handle only
Catalog Number FHOHS4, List Price $432.00
4-12
“A”
6.13
6.13
6.13
6.13
6.13
6.13
7.38
7.38
7.38
9.17
9.17
9.17
“B”
5.52
5.52
5.52
5.52
5.52
5.52
7.59
7.59
7.59
9.00
9.00
9.00
“C”
8.11
10.11
8.48
7.86
10.38
8.35
11.85
13.85
10.6
14.7
17.2
13.32
Fuse
Class
H, K, R
H, K, R
J
H, K, R
H, K, R
J
H, K, R
H, K, R
J
H, K, R
H, K, R
J
Standard
cable length is 36 inches. Alternate lengths are
available as follows:
Length
Amps
Cat. No.
List Price $
48"
30–100
FHOEC048
182.00
60"
30–100
FHOEC060
203.00
48"
200
FHOJC048
209.00
60"
200
FHOJC060
239.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
“A” – Dimension is measured from each
cross bail pin.
“B” – Dimension is measured from line
side barrier to load side barrier.
“C” – Dimension is measured from line
side terminal of switch to load side
terminal of fuse load base.
For
Type 4 and 4X applications, order handle only
Catalog Number RHOH4, List Price $150.00
Type 3 and 3R applications, order handle only
Catalog Number RHOH, List Price $116.00
Min. enclosure depth from mounting pan to handle mounting surfaces: 30-100A 6.44 Inches
200A 10.93 Inches
*For millimeters multiply inches by 25.4.
For
Discount Schedule HDSS & MCCB
Disconnect Switches
Type CFS Compact Fusible Switches
Features and Ordering Information
Features
▪ 30–400A ratings
▪ UL Listed & CSA Certified
▪ IEC 60 947-3 Certified & CE marked
▪ Door mounted rotary handles with
defeatable cover interlock
▪ Meets UL requirements for both main
and branch circuit applications
▪ Compact size
▪ 50 or 100KA with Class CC fuses or up
to 200KA with Class J fuses
▪ Load break and horsepower rated
▪ Quick make and break operation
▪ All handles are padlockable with up to
(3) padlocks with 5/16" hasps in the
OFF position
Shaft
Handle
CFS362J
CFSS10200H
CFSH10B4
▪ Handles are available in Type 1, 3R,
4/4X & 12 ratings
▪ NFPA 79 field installed kits are available
Lugs/Accessories
4
Switch
▪ Catalog number CFS361C5, CFS361J5
& CNFS361 can be DIN-rail mounted
and can be either front or side operated
with standard rotary handles
DISCONNECT
SWITCHES
CFSL200
Ordering Information
1. Select the panel mounted switch
required based on Ampere, HP and
AIC requirements. Switches with a
right hand mechanism are standard.
30-100A switches with a left hand
mechanism are available.
2. Select handle based on environmental
rating required.
3. Select operating shaft (200 or 400mm
in length). For enclosure depths of 9.0"
or less from panel mounting surface to
inside of door use 200mm long shafts.
For deeper enclosures use 400mm
long shafts. 30A 50kA switches can be
used in 10" deep enclosures (panel to
inside of door) with 200mm shaft and
CFSH5 handles.
Note: Be sure to check shaft and handle
compatibility with the switch selected by
using the information provided in the
selection tables.
4. Line & load lugs are provided as
standard on 30 & 60A switches.
Terminal kits are available for
100–400A switches if needed.
5. Auxiliary contacts are available if
needed as follows:
A. 30A, 50kA switch CFS361C5 and
non-fusible 30A switch CNFS361
will accept up to (4) aux contacts
without an aux contact holder.
B. 30A, 50kA switch CFS361J5 will
accept up to (2) aux contacts
without an aux contact holder.
If more than (2) aux contacts are
required order aux contacts PLUS
aux contact holder kit CFSAUXH1.
C. For all 100 or 200kA 30–400A
switches order the aux contacts
required PLUS aux contact holder kit
CFSAUXH2.
6. If non-fusible switch is required
order a shorting bar for 60-600A
switches or catalog number CNFS361
for 30A.
7. All switches are supplied with line
shields as standard. 30, 60 & 400A
switches are also supplied with load
shields. Load side terminal shroud kits
are available for 100 & 200A switches.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-13
Disconnect Switches
Type CFS Compact Fusible Switches
Switch and Handle Selection
Fusible Switches, 3-Pole 600V AC Max, 250V DC Max
Max Horsepower Ratings
Switch
Ampere
Rating
Catalog
Number
Fuse
Provisions
Provided
List
Price $
240V
3Ø AC
480V
3Ø AC
600V
3Ø AC
250V
DC
20
20
20
20
20
50
75
150
350
5
5
5
5
5
10
20
40
50
20
50
75
5
10
20
AC
Short
Circuit
Rating
Standard - with Right Hand Mounted Mechanism
30
30
30
30
30
60
100
200
400
CFS361C5
361.00
CFS361J5
376.00
CFS361C
382.00
CFS361J
424.00
CNFS361 336.00
CFS362J
488.00
CFS363J
678.00
CFS364J
1710.00
CFS365J
2462.00
Class CC
Class J
Class CC
Class J
None
Class J
7.5
7.5
7.5
7.5
7.5
15
30
60
125
15
15
15
15
15
30
60
125
250
50kA
50kA
100kA
200kA
50kA
CFS361J5
200kA
DISCONNECT
SWITCHES
4
Optional - with Left Hand Mounted Mechanism
30
60
100
CFS361JL
CFS362JL
CFS363JL
452.00
511.00
710.00
Class J
7.5
15
30
15
30
60
200kA
Operating Shafts
Shaft
Length
In. (mm)
7.9 (200)
Catalog
Number
CFSS5200
List
Price $
34.00
CFSS5400
36.00
CFSS5200H
34.00
7.9 (200)
CFSS5400H
36.00
15.7 (400)
CFSS10200H
36.00
7.9 (200)
CFSS10400H
38.50
15.7 (400)
15.7 (400)
Switch & Handle Compatibility
5mm x 5mm for use with CFS361C5, CFS361J5 &
CNFS361 switches & with “CFSH5” handles only
5mm x 5mm for use with all “CFSH10” handles & with
CFS361C5, CFS361J5 & CNFS361 switches only
10mm x 10mm for use with all “CFSH10” handles & with
all switches except CFS361C5, CFS361J5 & CNFS361
CFSS5400
CFSS5200
Rotary Operating Handles—Door Mounted
(for use with 50kA CFS361C5 & CFS361J5 switches only)
Type 1, 3R & 12
Catalog
Number
CFSH5B12
List
Price $
114.00
Color
Black
CFSH5R12
114.00
Yellow & Red
Operating Shaft Compatibility
CFSS5200 OR CFSS5400 (5mm x 5mm)
Rotary Operating Handles—Door Mounted
(for use with all operating shafts except CFSS5200 & CFSS5400
and with all CFS switches)
Catalog
Number
List
Price $
12
Color
CFSH10B12
137.00
Black
CFSH10R12
137.00
Yellow & Red
Type 1, 3R &
CFSH10BL12
143.00
Black
CFSH10RL12
143.00
Yellow & Red
Description
CFSH5B12
Heavy duty pistol grip (3.78" long)
Heavy duty pistol grip (6.00" long)
Type 1, 3R, 4/4X & 12
CFSH10B4
149.00
Black
CFSH10R4
149.00
Yellow & Red
CFSH10BL4
162.00
Black
CFSH10RL4
162.00
Yellow & Red
Line
Heavy duty pistol grip (3.78" long)
Heavy duty pistol grip (6.00" long)
and load lugs included.
and load lugs are not included.
Order from table on next page if required.
DC HP rating shown requires (2) poles to be connected in
series.
Line
4-14
DC
HP rating shown requires (3) poles to be connected in
series.
numbers CFS361C5 & CFS361J5 accept 5mm x
5mm operating shafts. All others accept 10mm x 10mm
operating shafts.
Catalog
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Compact
pistol grip design (3.25" long) with defeatable
cover interlock. Cover can be opened when handle is
padlocked in the OFF position.
Defeatable cover interlock provided. Cover cannot be
opened when handle is padlocked in the OFF position.
Catalog number CNFS361 is a non-fusible switch.
Discount Schedule HDSS
Disconnect Switches
Type CFS Compact Fusible Switches
CFSAUXH2, CFSAUXINO & CFSAUXINC
Accessories
CFSL100, 200 & 400
Type CFS Fusible Switch Accessories
Catalog
Number
List
Price $
Description
4
Terminals
71.00
100A Lug Kit (6 lugs per kit)
CFSL200
100.00
200A Lug Kit (6 lugs per kit)
CFSL400
276.00
400A Lug Kit (6 lugs per kit)
DISCONNECT
SWITCHES
CFSL100
Shorting Bars (no fuse kits)
CFSSB60
35.50
60A Shorting Bar Kit (3 links per kit)
CFSSB100
50.00
100A Shorting Bar Kit (3 links per kit)
CFSSB200
71.00
200A Shorting Bar Kit (3 links per kit)
CFSSB400
103.00
400A Shorting Bar Kit (3 links per kit)
Auxiliary
Contacts
CFSAUXH1
52.00
Aux Contact Holder (30A 50kA Sws)
CFSAUXH2
52.00
Aux Contact Holder (30–400 100 & 200kA SW)
CFSAUX1NO
28.00
Aux Contact 1 NO (30–400A Sws)
CFSAUX1NC
28.00
Aux Contact 1 NC (30–400A Sws)
CFSAUXH1 & CFSAUXINO
Terminal Shrouds
CFSTS100
84.00
100A Shroud Kit
CFSTS200
134.00
200A Shroud Kit
CFSTS400
155.00
400A Shroud Kit
Padlock Kit (when door is open)
CFSPLK
100.00
Shaft Padlocking Kit for 30A Compact Switch
NFPA 79 Kits
Kits provide an operating shaft suitable for use with all heavy duty handles (not for
use with CFSH5B12 or CFSH5R12). Kits also provide an internal operating handle &
an internal OFF padlocking provision.
CFSNFPA1
207.00
For use with CFS361C5, CFS361J5 & CNFS361
CFSNFPA2
343.00
For use with CFS361J - CFS365J & CFS361C
CFS5B100 – 400
Note: CFSNFPA2 cannot be used in combination with CFSAUX1NO or CFSAUX1NC auxiliary contacts.
Supplied as standard on 30 & 60A switches.
CFS361C5 and CNFS361 will accept (4) aux contacts
without an aux contact holder. CFS361J5 will accept (2)
aux contacts without an aux contact holder. ON ALL
OTHER SWITCHES CFSAUXH2 IS REQUIRED TO
MOUNT AUX CONTACTS.
Discount Schedule HDSS
Supplied as standard on all but 30A compact switches.
12.6 inch (320 mm) long operating shaft included.
11.3 inch (288 mm) long operating shaft included.
Line side terminal shrouds supplied with switch.
Supplied on both line and load side with CFS365J
switch.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-15
Disconnect Switches
Type CFS Compact Fusible Switches
Dimensions and Technical Characteristics
UL & CSA Technical Characteristics
Catalog
Number
DISCONNECT
SWITCHES
4
Amp Rating
Max AC Volts
Electrical Endurance
Max Horsepower Ratings
240V 3Ø AC
480V 3Ø AC
600V 3Ø AC
250V DC
AC Short Circuit Rating
Fuse Type (Class)
Electrical Endurance
Mechanical Endurance
Shaft Cross Section
Operating Torque (lb. In.)
Aux Contacts
Nema Rating AC
Nema Rating DC
CFS361C5햲
CFS361J5
CFS361C
CFS361J &
CFS361JL
CFS362J &
CFS362JL
CFS363J &
CFS363JL
CFS364J
CFS3615J
30
600
6000
30
600
6000
30
600
6000
30
600
6000
60
600
6000
100
600
6000
200
600
6000
400
600
1000
7.5
15
20
5햳
50kA
CC
6000
10000
5mm
21
7.5
15
20
5햳
50kA
J
6000
10000
5mm
21
7.5
15
20
5햳
100kA
CC
6000
10000
10mm
53
7.5
15
20
5햳
200kA
J
6000
10000
10mm
88
15
30
50
10햳
200kA
J
6000
10000
10mm
88
30
60
75
20햳
200kA
J
6000
10000
10mm
88
60
125
150
40햴
200kA
J
6000
8000
10mm
106
125
250
350
50햴
200kA
J
1000
6000
10mm
132
A600
N600
A600
N600
A600
N600
A600
N600
A600
N600
A600
N600
A600
N600
A600
N600
CFS361J5
CFS361C
CFS361J &
CFS361JL
CFS362J &
CFS362JL
CFS363J &
CFS363JL
CFS364J
CFS3615J
IEC Technical Characteristics
Catalog
Number
CFS361C5햵
Rating Insulation
Voltage Ui
Rated Impulse
Voltage (Uimp)
Operational Current Ie
400V AC
(AC22A & AC23A)
690V AC
(AC22A & AC23A)
Motor Power (kW)
400V AC
500V AC
690V AC
Max Peak (kA peak)
let though current
Cu cable sie (mm2)
800
800
750
750
750
750
750
800
8kV
8kV
8kV
8kV
8kV
8kV
8kV
8kV
32
32
32
32
63
100
200
400
32
32
32
32
63
100
200
400
15
18.5
25
15
18.5
25
15
18.5
25
15
18.5
25
30
40
55
51
63
90
100
140
185
220
220
220
5.5
6
5.5
6
7.6
6
17.6
6
17.6
10
22
25
32
50
36
185
Panel Space Requirements
Wire Ranges Line & Load Lugs
Switch
Ampere
Rating
UL
Approved
Wire Size (75°C)
Mechanical
Wire Range
of Lug (75°C)
Catalog
Number
CFS361C5
30
4.56 (116)
3.78 (96)
6.00 (152)
30
60
100
200
#10 Cu
#6 Cu
#3 Cu
#3/0 Cu
(2) 300 kcmil Al
or (2) 4/0 Cu
#14–10 Cu
#10–3 Cu
#14–2/0 Cu/Al
#6–3/0 Cu/Al
CFS361J5
30
4.56 (116)
4.15 (105)
6.00 (152)
CFS361C
30
5.88 (149)
5.62 (143)
7.00 (178)
CFS361J & CFS361JL
30
5.88 (149)
6.75 (171)
7.00 (178)
(2)#2–600 kcmil Cu/Al
CFS362J & CFS362JL
60
5.88 (149)
6.75 (171)
7.00 (178)
CFS363J & CFS363JL
100
7.19 (183)
8.25 (210)
7.00 (178)
CFS364J
200
8.13 (206)
9.44 (240)
8.00 (203)
CFS365J
400
14.94 (363)
11.94 (303)
8.00 (203)
400
햲
Ratings also apply to catalog number CNFS361
except the 50kA AIC rating applies when switch is
protected by Class J or CC 30A max. fuses.
햳 DC HP rating requires (2) poles to be connected in
series.
4-16
햴
햵
Ampere
Rating
DC HP rating requires (3) poles to be connected in
series.
Ratings also apply to catalog number CNFS361.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Dimensions Inches (mm)
Height
Width
햶
Depth햶
Minimum dimension from mounting surface to inside
of cover. Dimensions shown can be decreased if aux
contacts are not required.
Disconnect Switches
Type VB Panelboard Units
Features
Vacu-Break ®
21/2"
Specifications
Application
VB Panelboard Switches are intended
for use in applications where:
1. Rugged constructions, reliable performance, continuity of service and ease of
maintenance are emphasized, or
2. Available fault currents higher than
10,000A are likely to be encountered, in
manufacturing plants, mass production
industries and commercial, institutional
and other large buildings served by network systems or transformers of high
capacities.
Maximum Withstand Ratings — 240V AC
H, K Fuses
R Fuses
J Fuses
10,000
200,000
—
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
—
—
—
—
—
—
units will not accept Class R or J fuse clip kits and
are rated 10,000 AIC max.
L Fuses
—
—
—
—
—
—
—
—
—
—
200,000
100,000
T Fuses
—
—
—
—
200,000
200,000
200,000
200,000
200,000
200,000
200,000
—
Maximum Withstand Ratings — 600V AC
H, K Fuses
R Fuses
J Fuses
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
200,000
200,000
10,000
—
200,000
10,000
200,000
200,000
10,000
200,000
200,000
—
—
—
—
—
—
L Fuses
—
—
—
—
—
—
—
—
—
—
200,000
100,000
T Fuses
—
—
—
200,000
200,000
200,000
200,000
—
200,000
200,000
200,000
—
Ratings
are for 600V switches and fuses when used on a
240V max. AC system.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-17
DISCONNECT
SWITCHES
Switch
Rating
1130–30
1130–60
1160–60
1160–100
1100
1100–100
1200
1200–200
1400
1600
1800
1200
installation and are designed with
openings large enough to accommodate
removable lugs (200 Amps and larger
units).
High Pressure Spring Reinforced
Copper Fuse Clips — Provided extra
pressure at the contact points. Fuse
clips are removable from the front in 71⁄2"
and 10" units and from the rear of 5"
units.
Voidable Cover Interlock — Permits
only authorized personnel to void the
door interlock and open door with
switch “on.” “Fool proof” mechanism
will not permit door to be closed unless
handle is in the correct position.
4
Exclusive
Clampmatic
Arc Control — Hazardous switching
arcs are safely confined and controlled in
the Vacu-Break chamber.
NEMA Phasing — All line connections
are phased as per NEMA Standards, i.e.,
left to right and top to bottom as you
face the unit.
Pressure Terminal Connectors —
Suitable for aluminum or copper (100
Amps or larger). All Terminal Connectors
200 Amps and larger are removable.
Connection Screws — Bullet nosed for
positive location and seating of screw.
Quick-Make Quick-Break — Assured
by design of cam mechanism and
powerful springs. Positive operation in
“ON”or “OFF” position results from
design of the cross arm and Vacu-Break
head linkage.
Easy Mounting — Mounting feet have
captive bullet nosed screws added,
which seat quickly and positively,
reducing installation time.
Padlocking Member — Provides
locking of handle in the “ON”or “OFF”
position.
Fibre End Barriers — Insulated End
Barriers prevent damage to wire during
General
Short Circuit Withstand Ratings
Suitable for use on systems capable of
delivering not more than 200,000 RMS
symmetrical amperes of fault current
when Class J or R fuses are installed.
1200A switches are the exception,
which are suitable for use on circuits
capable of delivering not more than
100,000 RMS symmetrical amperes of
fault current when Class L fuses are
installed. Also, 100–800A switches with
Class T fuses and field adapter kit,
which are 200,000 RMS symmetrical
rated.
Fuses
Fusible switches will accept the
following UL Class fuses:
Class H
Class K
Class R or J with proper adapter kit
Class L — 800 and 1200A switches
Class T — 100–800 switches with
proper adapter kit
Cover Interlocks
Voidable cover interlocks standard on all
switches. Prevents cover from being
opened when switch is in the “ON”
position.
UL Listing
Listed by UL under file #E6849 as
miscellaneous switches and also
suitable for use as service equipment
(where applicable). Meets UL98
standard for enclosed and deadfront
switches.
NEMA Specifications
Meets NEMA standard KS-1-1990 for
type HD switches.
Federal Specifications
Meets previous federal specifications
W-S-865C for heavy duty switches (Type
HD) Type 1 switches — general purpose
enclosed (Type 1).
Disconnect Switches
Type VB Panelboard Units
Selection
Fusible Units For SB1, SB2 Switchboards and F1, F2 Panelboards
Catalog Numbering System
V
7
E
3
2
3
3
▲
▲
▲
▲
▲
▲
▲
Vacu-Break
Unit
Width
2 = 12"
7 = 17"
M = 17" (Main)
B = 5"
E = 71⁄2"
F = 10"
H = 15"
2 = 60A
3 = 100A
4 = 200A
Height
A = 21⁄2"
S = 18.75"
Number of Poles
2
3
Voltage Rating
2 = 240V
6 = 600V
Amperes
DISCONNECT
SWITCHES
4
0 = Single Unit
Double
1 = 30A
Ampere Rating
1 = 30A
2 = 60A
3 = 100A
4 = 200A
5 = 400A
6 = 600A
Example: V7E3233 = Vacu-Break Unit, 17" Wide, 71⁄2" High, 3-Pole, 240 Volts, Double Branch Unit with 100 Amp Rating each side. Suffix
letters MS indicate Main Switch.
Vacu-Break ® Fusible Units
2-Pole , 12" Wide
240V AC, 250V DC
Ampere
Rating
Unit
Height
(inches)
Unit
Depth
(inches)
Horsepower Rating
240 Volt AC
Standard
Maximum
130–30
21⁄2
41⁄2
011⁄2
1
250 Volt
DC
Lug Wire Range (Cu/AI)
and Cables Per Pole
Unit
Weight
(pounds)
Catalog
Number
List
Price $
03
05
(1)–#14 to #8 (Cu Only)
15
V2A2211LR ■
588.00
130–30
5
4 ⁄2
011⁄2
03
05
(1)–#14 to #8
19
V2B2211LR ■
758.00
130–60
5
41⁄2
011⁄2 –3
03–10
05–10
(1)–#14 to #4
19
V2B2212LR ■
837.00
160–60
5
41⁄2
03
10
10
(1)–#14 to #4
19
V2B2222LR ■
837.00
100
71⁄2
63⁄4
071⁄2
15
20
(1)–#10 to #1/0
14
V2E2203LR ■
671.00
200
71⁄2
63⁄4
15
—
40
(1)–#6 to 250 kcmil
19
V2E2204LR ■
1175.00
3-Pole
Ampere
Rating
240V AC, 250V DC
Unit
Height
(inches)
Unit
Depth
(inches)
Horsepower Rating
240 Volt AC
Standard
Maximum
Unit
Weight
(pounds)
Lug Wire Range (Cu/AI)
and Cables Per Pole
Catalog
Number
List
Price $
Branch Circuits, 12" Wide Units
21⁄2
41⁄2
03
071⁄2
(1)–#14 to #8 (Cu Only)
5
V2A3211■
130–30
5111
1
4 ⁄2
03
071⁄2
(1)–#14 to #8
9
V2B3211■
130–30
5111
41⁄2
03
071⁄2
(1)–#14 to #8
9
V2B3211R ■
1007.00
130–60
5111
41⁄2
03–71⁄2
071⁄2–15
(1)–#14 to #4
9
130–60
5111
41⁄2
03–71⁄2
071⁄2–15
(1)–#14 to #4
9
V2B3212■
V2B3212R ■
1007.00
160–60
5111
41⁄2
071⁄2
15
(1)–#14 to #4
9
V2B3222
5111
1
4 ⁄2
071⁄2
15
(1)–#14 to #4
9
V2B3222R ■
100
71⁄2
63⁄4
15
30
(1)–#10 to #1/0
14
V2E3203
758.00
200
10 11
63⁄4
25
60
(1)–#6 to 250 kcmil
21
V2F3204
1473.00
50
21
V2F3204MS■
1473.00
130–30
160–60
652.00
943.00
943.00
943.00
1007.00
Main Switch , 12" Wide Units, Back Connected
200
10
63⁄4
25
For inches / millimeters conversion, multiply inches by 25.4.
■ Built to order. Allow 2–3 weeks for delivery.
These units are available in LR (left, right) connection
figurations only.
4-18
This
unit is not a Vacu-Break unit, but rather operates on a
sliding contact, double break principle. Rated 10,000 AIC
max. with either Class H or K fuses. Will not accept Class R
fuse clip kits.
Units set up for R-fuse application only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
For
2-pole main switch (200A), use 3-pole main switch
Vacu-Break unit.
furnished with spade type bolted terminal pads.
Load-side
Discount Schedule VBSS
Disconnect Switches
Type VB Panel Units
Selection
Vacu-Break ® Fusible Units for SB1, SB2 Switchboards and F1, F2 Panelboards
Ampere
Rating
2-Pole ,
Unit
Height
(inches)
Unit
Depth
(inches)
Horsepower Rating
240 Volt AC
Standard
Maximum
250 Volt
DC
Lug Wire Range (Cu/AI)
and Cables Per Pole
Unit
Weight
(pounds)
Catalog
Number
Branch Circuits, 17" Wide Units
List
Price $
240V AC, 250V DC
30–30
121⁄2
63⁄4
011⁄2
003
05
(1)–#14 to #8 (Cu Only)
15
V7A2211_ _■
652.00
30–30
15
63⁄4
011⁄2
003
05
(1)–#14 to #8
19
V7B2211_ _❍
837.00
30–30
15
63⁄4
011⁄2
003
05
(1)–#14 to #8
19
V7B2211__R
933.00
30–60
15
63⁄4
011⁄2 –3
003–10
05–10
(1)–#14 to #4
19
V7B2212LR■
931.00
30–60
15
63⁄4
011⁄2 –3
003–10
05–10
(1)–#14 to #4
19
V7B2212LRR■
994.00
60–60
15
63⁄4
03
010
10
(1)–#14 to #4
19
V7B2222_ _
931.00
60–60
15
63⁄4
03
010
10
(1)–#14 to #4
19
V7B2222__R
994.00
60–100
171⁄2
63⁄4
03–71⁄2
010–15
10–20
(1)–#10 to #1/0
18
V7E2223LR■
1090.00
100 –100
171⁄2
63⁄4
071⁄2
015
20
(1)–#10 to #1/0
20
V7E2233_ _❍
1090.00
100
17 ⁄2
6 ⁄4
07 ⁄2
015
20
(1)–#10 to #1/0
14
V7E2203LR
200
171⁄2
63⁄4
15
—
40
(1)–#6 to 250 kcmil
21
V7E2204_ _❒
1241.00
400
15
101⁄2
—
—
50
(1)–#1/0 to 500 kcmil or
(2)–#1/0 to 300 kcmil
63
V7H2205LR
2947.00
V7H2206LR■
3410.00
3
1
15
10 ⁄2
1
—
—
—
(2)–#4/0 to 500 kcmil
63
200
171⁄2
400
600
240V AC, 250V DC
63⁄4
15
—
40
21
V7E2204MS■
1241.00
15
101⁄2
—
—
50
63
V7H2205MS
2947.00
15
101⁄2
—
—
—
63
V7H2206MS
3-Pole, Branch Circuits, 17" Wide Units
30–30
121⁄2
63⁄4
03
0071⁄2
—
(1)–#14 to #8 (Cu Only)
15
V7A3211
30–30
15
63⁄4
03
0071⁄2
—
(1)–#14 to #8
19
V7B3211
30–30
15
63⁄4
03
0071⁄2
—
(1)–#14 to #8
19
V7B3211R
30–60
15
63⁄4
03–71⁄2
0071⁄2–15
—
(1)–#14 to #4
19
V7B3212
30–60
15
3
6 ⁄4
03–7 ⁄2
0071⁄2–15
—
(1)–#14 to #4
19
V7B3212R
60–60
15
63⁄4
071⁄2
015
—
(1)–#14 to #4
19
V7B3222
60–60
15
63⁄4
071⁄2
015
—
(1)–#14 to #4
19
V7B3222R
60
171⁄2
63⁄4
071⁄2
1
3410.00
240V AC
721.00
991.00
1052.00
991.00
1052.00
991.00
1052.00
015
—
(1)–#14 to #4
13
V7E3202
834.00
60–100
17 ⁄2
6 ⁄4
071⁄2–15
015–30
—
(1)–#10 to #1/0
18
V7E3223
1296.00
100 –100
171⁄2
63⁄4
15
030
—
(1)–#10 to #1/0
20
V7E3233
1296.00
100 –100
171⁄2
63⁄4
15
030
—
(1)–#10 to #1/0
20
V7E3233R
1509.00
100
171⁄2
63⁄4
15
030
—
(1)–#10 to #1/0
14
V7E3203
200 –200
10
63⁄4
25
060
—
(1)–#6 to 250 kcmil
40
V7F3644
200 –200
10
63⁄4
25
060
—
(1)–#6 to 250 kcmil
40
V7F3244R
3334.00
200
10
63⁄4
25
060
—
(1)–#6 to 250 kcmil
21
V7F3204
1519.00
400
15
101⁄2
50
125
—
(1)–#1/0 to 500 kcmil or
(2)–#1/0 to 300 kcmil
63
V7H3205
3410.00
400
15
101⁄2
50
125
—
(1) 250 to 750 kcmil or
(2) 1/0 to 300 kcmil
63
V7H3205750
3410.00
600
15
101⁄2
75
200
—
(2)–#4/0 to 500 kcmil
63
V7H3206
1
3
3-Pole, Main Switch, 17" Wide Units (Vertical Mount, Top Feed, Front Connected)
834.00
3192.00
3835.00
240V AC
400
18.75
103⁄8
50
125
—
—
—
VMS325T
600
18.75
103⁄8
75
200
—
—
—
VMS326T
3-Pole, Main Switch, 17" Wide Units (Vertical Mount, Bottom Feed, Front Connected)
3410.00
3835.00
240V AC
400
18.75
103⁄8
50
125
—
—
—
VMS325B
600
18.75
103⁄8
75
200
—
—
—
VMS326B
3-Pole, Main Switch, 17" Wide Units, Back Connected
3410.00
3835.00
240V AC
100
171⁄2
63⁄4
15
030
—
14
V7E3203MS
959.00
200
10
63⁄4
25
060
—
21
V7F3204MS
1519.00
400
15
101⁄2
50
125
—
63
V7H3205MS
3410.00
75
200
—
63
V7H3206MS
3835.00
600
15
1
10 ⁄2
For inches / millimeters conversion, multiply inches by 25.4.
■ Built to order. Allow 2–3 weeks for delivery.
❒ MR suffix. Built to order. Allow 2–3 weeks for delivery.
❍ MR, LM suffix. Built to order. Allow 2–3 weeks for
delivery.
Discount Schedule VBSS
Order
2-pole branch circuit units by adding appropriate
connection designation LM, LR or MR (indicating Left,
Middle and Right, facing the panel).
This unit is not a Vacu-Break unit, but rather operates on a
sliding contact, double break principle. Rated 10,000 AIC
max. with either Class H or K fuses. Will not accept Class R
fuse clip kits.
MR not available.
Available
as Type LR connection designation only.
Switches set up for R-fuse applications only.
Rated 600 Volts but factory configured to accept 250V
Class H, K or R fuses. Field convertible for Class J fuses for
600V applications. Field convertible for 300V Class T fuse
with TFAK42 kit.
Load-side furnished with spade type bolted terminal pads.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-19
DISCONNECT
SWITCHES
2-Pole, Main Switch, 17" Wide Units, Back Connected
863.00
4
600
1
Disconnect Switches
Type VB Panel Units
Selection
Vacu-Break ® Fusible Units For SB1, SB2 Switchboards and F1, F2 Panelboards
Ampere
Rating
Unit
Height
(inches)
Unit
Depth
(inches)
Horsepower Rating
480 Volt AC
600 Volt AC
Standard Maximum Standard Maximum
Lug Wire Range (Cu/AI)
and Cables Per Pole
Unit
Weight
(pounds)
2-Pole, Branch Circuits, 17" Wide Units
Catalog
Number
List
Price $
600V AC, 250V DC
1130–30
171⁄2
63⁄4
003
0071⁄2
003
010
(1)–#14 to #8
14
V7E2611LR ■
1063.00
1130–60
171⁄2
63⁄4
003–5
0071⁄2–20
003–5
020–25
(1)–#14 to #4
14
V7E2612LR ■
1063.00
1160–60
171⁄2
63⁄4
005
020
010
025
(1)–#14 to #4
14
V7E2622LR ■
1063.00
1100
171⁄2
63⁄4
010
020
015
040
(1)–#10 to #1/0
14
V7E2603LR ■
753.00
1200
10
63⁄4
025
050
030
050
(1)–#6 to 250 kcmil
21
V7F2604LR ■
1657.00
1400
15
101⁄2
—
—
—
—
(1)–#1/0 to 500 kcmil
63
V7H2605MR◆
3410.00
3-Pole, Branch Circuits, 17" Wide Units
600V AC, 250V DC
63⁄4
005
015
0071⁄2
020
(1)–#14 to #8
14
V7E3611
1364.00
1130–30
171⁄2
63⁄4
005
015
0071⁄2
020
(1)–#14 to #8
14
V7E3611R
1568.00
1130
171⁄2
63⁄4
005
015
0071⁄2
020
(1)–#14 to #8
14
V7E3601
931.00
1130–60
171⁄2
63⁄4
005–15
015–30
0071⁄2–15 020–50
(1)–#14 to #4
14
V7E3612
1364.00
171⁄2
63⁄4
4
171⁄2
1160–60
015
030
015
050
(1)–#14 to #4
14
V7E3622
1364.00
1160–60
17 ⁄2
63⁄4
015
030
015
050
(1)–#14 to #4
14
V7E3622R
1568.00
DISCONNECT
SWITCHES
1130–30
1160
171⁄2
63⁄4
015
030
015
030
(1)–#14 to #4
14
V7E3602
931.00
1160–100
171⁄2
63⁄4
015–25
030–60
015–30
050–75
(1)–#10 to #1/0
18
V7E3623
1915.00
1100–100
171⁄2
63⁄4
1
025
060
030
075
(1)–#10 to #1/0
20
V7E3633
1915.00
1100–100
17 ⁄2
63⁄4
025
060
030
075
(1)–#10 to #1/0
20
V7E3633R
2057.00
1100
171⁄2
63⁄4
025
060
030
075
(1)–#10 to #1/0
14
V7E3603
1200–200
10
63⁄4
050
125
060
150
(1)–#6 to 250 kcmil
40
V7F3644 J
3192.00
1200
10
63⁄4
050
125
060
150
(1)–#6 to 250 kcmil
21
V7F3604
1736.00
1200
10
63⁄4
050
125
060
150
(1)–#6 to 250 kcmil
21
V7F3604 R
1808.00
1
400
15
101⁄2
100
250
125
350
(1)–#1/0 to 500 kcmil or
(2)–#1/0 to 300 kcmil
63
V7H3605
4033.00
1
400
15
101⁄2
100
250
125
350
(1)–250 to 750 kcmil or
(2)–#1/0 to 300 kcmil
63
V7H3605750
4033.00
150
400
200
500
(2)–#4/0 to 500 kcmil
63
V7H3606
4164.00
1600
1
15
1
10 ⁄2
3-Pole, Main Switch, 17" Wide Units (Vertical Mount, Top Feed, Front Connected)
931.00
600V AC, 250V DC
1400
18.75
103⁄8
100
250
125
350
—
VMS365T
4033.00
1600
18.75
103⁄8
150
400
200
500
—
VMS366T
4164.00
3-Pole, Main Switch, 17" Wide Units (Vertical Mount, Bottom Feed, Front Connected)
600V AC, 250V DC
1400
18.75
1711⁄16
100
250
125
350
—
VMS365B
4033.00
1600
18.75
1711⁄16
150
400
200
500
—
VMS366B
4164.00
3-Pole, Main Switch, 17" Wide Units, Back Connected
600V AC, 250V DC
1100
171⁄2
163⁄4
125
150
130
150
14
1200
10
163⁄4
150
125
160
150
21
V7E3603MS■
V7F3604MS■
1736.00
931.00
1400
15
101⁄2
100
250
125
350
63
V7H3605MS
4033.00
1600
15
101⁄2
150
400
200
500
63
V7H3606MS
4164.00
3-Pole, Switchboard Units, 21" Wide Units, Front Connected
600V AC, 250V DC
1800
25
12 3⁄4
200
500
250
500
—
160
1200
25
12 3⁄4
—
—
—
—
—
160
VF357TL or BL❍
VF358TL or BL
3-Pole, Switchboard Units, 21" Wide, Back Connected
9327.00
9568.00
600V AC, 250V DC
1800
25
12 3⁄4
200
500
250
500
—
160
VB357TL or BL■
8573.00
1200
25
12 3⁄4
—
—
—
—
—
160
VB358TL or BL■
8993.00
■ Built to order. Allow 2–3 weeks for delivery.
◆ MR suffix only is available and built to order. Allow 2–3
weeks for delivery.
❍ BL suffix. Built to order. Allow 2–3 weeks for delivery.
Catalog number for 2-pole branch circuit units indicate
connection designation LM, LR or MR (indicating Left,
Middle and Right, facing the panel).
4-20
Unit
configured to accept class J fuses only. Also accepts
300V Class T fuses when used with TFAK42 adapter kit.
furnished with spade type bolted terminal pads.
Suffix “T” or “TL” indicates Top Feed.
Suffix “B” or “BL” indicates Bottom Feed.
Back connected units are also available. Substitute the letter “B” (back connected) for the letter “F” (front connected)
in the prefix of the catalog number. All other features
are identical.
Load-side
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Available
Switches
Available
as Type MR designation only.
set up for R-fuse applications only.
as Type LR designation only.
Discount Schedule VBSS
Disconnect Switches
Type VB Panelboard Units, Accessories
Extension Kits
To extend Vacu-Break unit’s depth,
order the extension kit which meets
the specifications of the unit to be
extended. Specify by catalog number
from the table below.
Selection
Unit Type
Unit Height
(inches)
Normal Unit Depth Extended Unit Depth
(inches)
(inches)
Catalog Number
V2A
12 1⁄2
4 9⁄16
16 3⁄4
W43000■
41.50
V2B
15
4 9⁄16
16 3⁄4
W43002
41.50
V7A
12 1⁄2
6 3⁄4
10 1⁄2
W48762
114.00
V7B
15
6 3⁄4
10 1⁄2
W48763
121.00
V7E
17 1⁄2
6 3⁄4
10 1⁄2
W48764
154.00
V7F
10
6 3⁄4
10 1⁄2
W48765
181.00
List Price $
Fuse Adapter Kits
Class R and Class J Fuse Kits are single unit part numbers. Order (2) kits for dual units. Class T Fuse Kits are single pole part numbers.
Order (3) kits for a 3-pole unit. To order the kit which meets the specifications of the unit to be changed, specify by catalog number
from the tables below.
240 Volt Fuse Adapter Kits
Class R Kits
Class T Kits
Class J Kits
Class T Kits
Catalog
Number
Catalog
Number
List
Price $
Switch
Amperage
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Class R Kits
Catalog
Number
130 햳
Factory Inst. —
—
—
—
130
W56623
85.00
W49832
163.00
—
160
W56628
91.00
W49829
163.00
—
—
160
W56629
85.00
W49830
163.00
—
100
W55365
61.00
W49827
131.00
TFAK32
76.00
100
W55365
61.00
W49828
131.00
TFAK35
120.00
200
W55366
61.00
W49819
131.00
TFAK42
102.00
200
W55366 햴
61.00
W49818 햲 163.00
TFAK45
143.00
400
W55367
91.00
W49814
330.00
TFAK52
102.00
400
W55367
91.00
W49816
395.00
TFAK55
151.00
600
W55368
91.00
W49813
459.00
TFAK62
120.00
600
W55368
91.00
W49815
330.00
TFAK65
174.00
800
—
—
—
TFAK75
238.00
List
Price $
—
—
List
Price $
—
—
Vacu-Break Connecting Strap Kits For Panelboards and Switchboards
Ampere
Rating
240V Unit
Height (inches)
600V Unit
Height (inches)
S4/F1, FPP (10" Deep)
Strap Kit
130–30
12.5
—
F602
130–30
15
17.5
F657
130-60
15
17.5
160–60
15
17.5
160-100
17.5
100-100
S5/F2 (12.75" Deep)
Strap Kit
List
Price $
SB1, SB2, SB3, FC-20, FC-1
VB-5, VB-6, Strap Kit
46.00
F602D
210.00
—
—
46.00
F657D
254.00
VB657
302.00
F657
46.00
F657D
254.00
VB657
302.00
F657
46.00
F657D
254.00
VB657
302.00
17.5
F657
46.00
F657D
254.00
VB657
302.00
17.5
17.5
F657
46.00
F657D
254.00
VB657
302.00
100
17.5
17.5
F657
46.00
F657D
254.00
VB657
302.00
200
17.5, 10
17.5, 10
F671
70.00
F671D
393.00
VB671
471.00
200–200
10
10
F672
430.00
F672D
430.00
—
—
400
15
15
—
—
—
—
VB6150
211.00
600
15
15
—
—
F6150D
186.00
VB6150
211.00
For inches / millimeters conversion, multiply inches by 25.4.
햲 For
■ Built to order. Allow 2–3 weeks for delivery.
햳 5˝
Discount Schedule VBSS
List
Price $
200 A single units only. Dual units are suitable for Class J
only, when used above 240V.
unit height switches only.
햴 For single units only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-21
DISCONNECT
SWITCHES
Switch
Amperage
4
List
Price $
600 Volt Fuse Adapter Kits
Class J Kits
Disconnect Switches
Type HCP Switchboard Units, Accessories
Features
▪
▪ UL Listed under file number E6849
Vol 1, Sect. 8
▪ 400-1200A ratings
▪ Visible contacts
▪ Field installable shunt trip and auxiliary
switch accessory kits
▪ Installs in existing Siemens
switchboards and power panelboards
▪ Suitable for use on systems with up to
200,000A available fault current,
RMS symmetrical when equipped with
Class J or Class L fuses
▪
▪
▪
▪
Selection
Group mounts with other 30A through
600A switches, and 100 through 1200
amp frame breakers
Allows 800A and 1200A switches in
standard 38" wide distribution sections
in either main or branch configurations
16 1⁄4" mounting height is the smallest
1200A design in the industry, allowing
up to 4 units in one vertical section
Field reversible horizontal mounting
design for left or right hand cabling
Handle can be padlocked in the OFF
position with up to three padlocks with
5/16" hasps. A cover padlocking
provision is also supplied
DISCONNECT
SWITCHES
4
3-Pole, Horizontal Mount
Maximum
Ampere
Rating
Catalog
Number
Maximum
AC Voltage
Rating
Horsepower Rating
Fuse
Class
Dimensions (inches*)
240V
H
W
D
Std
Max
Std
480V
Max
Std
600V
Max
250V
DC
List
Price $
5117.00
HCP367HJ400
1400
600
J
16.25
17.22
7.38
150
125
100
250
125
350
40
HCP367HJ600
1600
600
J
16.25
17.22
7.38
175
200
150
400
200
400
40
5751.00
800
240
T
16.25
17.22
7.38
100
250
—
—
—
—
50
11366.00
HCP367H
1800
600
L
16.25
17.22
7.38
100
250
200
500
250
500
50
10724.00
HCP328HT
1200
240
T
16.25
17.22
7.38
100
250
—
—
—
—
50
12626.00
HCP368H
1200
600
L
16.25
17.22
7.38
100
250
200
500
250
500
50
10998.00
HCP367VJ400
1400
600
J
17.00
16.25
7.38
150
125
100
250
125
350
40
5117.00
HCP367VJ600▲
1600
600
J
17.00
16.25
7.38
175
200
150
400
200
400
40
5751.00
800
240
T
17.00
16.25
7.38
100
250
—
—
—
—
50
11366.00
HCP367V
1800
600
L
17.00
16.25
7.38
100
250
200
500
250
500
50
10724.00
HCP328VT
1200
240
T
17.00
16.25
7.38
100
250
—
—
—
—
50
12626.00
HCP368V
1200
600
L
17.00
16.25
7.38
100
250
200
500
250
500
50
10998.00
HCP327HT
3-Pole, Vertical Mount
HCP327VT
Accessories
T Fuse Adapter Kits (one per pole)
Terminal Connectors (one lug per kit)
List
Price $
Catalog
Number
Description
List
Price $
(2) #1 AWG–500 kcmil (Cu or AI)
71.00
TFAK72
1800A, 300V AC
214.00
(2) #1 AWG–500 kcmil (Cu only)
120.00
TFAK75
1800A, 600V AC
238.00
TA3K500
(3) #1 AWG–500 kcmil (Cu or AI)
98.00
TFAK82
1200A, 300V AC
543.00
TC3K350
(3) #1 AWG–350 kcmil (Cu only)
151.00
Ampere
Rating
Catalog
Number
Connector
Wire Range
400–600A
TA2K500
400–600A
TC2K500
400–800A
400–800A
800-1200A
TA4H500
(4) #2 AWG–500 kcmil (Cu or AI)
182.00
800-1200A
TA3H750
(3) 250–750 kcmil (Cu or AI)
278.00
Auxiliary Switch Kits
Maximum
Voltage
Contact
Ampere
Rating
AC
DC
Switch
Mounting
15A
480
125
Left Pole
1NO/1NC
A01HCPL4▲
361.00
15A
480
125
Right Pole
1NO/1NC
A01HCPR4
361.00
AC
DC
Catalog
Number
120
—
HCPST120
798.00
240
—
798.00
277
—
HCPST240▲
HCPST277
480
—
—
—
4-22
List
Price $
Switchboard Connection Strap Kit
Shunt Trip Kit
Control Voltage
Contacts
Catalog
Number
List
Price $
Switch
Ampere Rating
Catalog
Number
List
Price $
400–1200A
F6162D
1366.00
Compression Lug Adapter Kit
The use of this kit provides for the
mounting of up to four lugs per phase.
Each kit accepts lugs with (2) 3/8"
diameter mounting holes on 1" centers.
One kit per pole line or load is required.
Lugs are not provided.
Ampere
Rating
Catalog
Number
List
Price $
400–1200A
HCPCLP
274.00
798.00
798.00
148
HCPST480▲
HCPST48▲
125
HCPST125▲
798.00
798.00
*For inches / millimeters conversion, multiply inches by
25.4.
▲ Built to order. Allow 6–8 weeks for delivery.
For horizontal mounting only in either 38" wide min
switchboards or S5/F2 power panelboards.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Both
240 and 600V AC switches are also rated 250V DC
max.
Discount Schedule VBSS
Disconnect Switches
Type HCP Switchboard Units
Dimensions
4
DISCONNECT
SWITCHES
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4-23
Disconnect Switches
Type TFP Fusible Pullouts
Selection/Dimensions
Features
Type TFP Fusible Pullouts
▪ 100 and 200 Ampere Disconnects
▪ 240 Volt and 600 Volt Designs
▪ Class T Fuses
▪ Factory Installed Wire Connectors
▪ U.L. Listed for applications up to
200,000 Amps symmetrical at
600 Volts
▪ Physically interchangeable with
Siemens Type QJ2, QJH2
and QJ2-H
DISCONNECT
SWITCHES
4
▪ UL 1429, File No. E118778
T-Fuse Pullout
TFP223
T-Fuse Pullouts
2-Pole, 2-Fuse
Maximum
Voltage
Ampere
Rating
Catalog
Number
Connector
Wire Range 햲
List
Price $
240 햳
100
200
TFP223
TFP224
(1 pc.) #6-300 kcmil Cu
(1 pc.) #4-300 kcmil Al
540.00
726.00
240 햳
100
200
TFP323
TFP324
600
100
200
TFP363
TFP364
3-Pole, 3-Fuse
(1 pc.) #6-300 kcmil Cu
(1 pc.) #4-300 kcmil Al
652.00
873.00
807.00
1103.00
Fuses — Not included. Consult local sales office for replacement parts.
Fusible Pullouts Dimensions (inches*)
Class T Pullout Mounting Hardware
Catalog Number MSQJ (Includes 4 screws)
For inches / millimeters conversion, multiply inches by 25.4.
햲
햳
4-24
Replacement terminal lug Catalog Number TA1Q300.
240 bolt pullouts require 300 volt Class T fuses.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule HDSS
5SPEEDFAX
TM
2007-2008 Enclosed Circuit Breakers
Contents
Enclosure Types
5-2
Complete Assemblies
Molded Case Circuit Breakers
Enclosed Molded Case Switches
5-3 – 5-6
5-7
Enclosures
Type 1, Selection
5-8
Type 1, Dimensions
5-9
Type 3R, Selection
5-10
Type 3R, Dimensions
5-11
Types 4, 4X, 7 and 9, Selection/Dimensions
5-12
Types 5, 12 and 12K, Selection/Dimensions
5-13
Knockout and Hub Data
5-14
5
ENCLOSED
CIRCUIT BREAKERS
Residential Commercial Industrial
Enclosed Circuit Breakers
Enclosure Types
General
Type 3R
ENCLOSED
CIRCUIT BREAKERS
5
Type 1
Types 5, 12, 12K
Types 7, 9
Type 1 — A general indoor, sheet-steel
enclosure for use in normal
atmospheres. Listed as service
entrance equipment.
Type 3R — An outdoor, sheet-steel
enclosure providing protection against
driving rain, sleet or snow. Listed as
service entrance equipment.
Types 7, 9 — Cast aluminum enclosure
classified for explosion and fire hazard.
5-2
Only enclosure for use in hazardous
location. Class I; Group D–Class II;
Groups E, F, and G–Class III.
Types 4, 4X (not shown) — Stainless
steel indoor or outdoor enclosure
designed for use in areas where serious
corrosion problems exist. They provide a
degree of protection against windblown
dust, rain, splashing water and hosedirected water. Meets NEMA Type 3, 4,
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4X, 12 and 13 requirements and UL 508
Type 4 and 4X requirements.
Types 5, 12 — A special-industry, sheetsteel enclosure for use in atmospheres
containing particles of lint, dust, dirt,
sawdust and other foreign matter.
Type 12K — A semi-dusttight sheetsteel enclosure. Listed as service
entrance equipment.
Enclosed Circuit Breakers
Complete Assemblies—Molded Case Circuit Breakers
Siemens Enclosed Circuit Breaker
Complete Assemblies consist of a thermal
magnetic molded case circuit breaker
frame, trip unit, enclosure and standard
line and load pressure wire connectors —
assembled and shipped as one unit from
the Siemens modification center. For
service equipment or applications
Selection
requiring a solid neutral, neutrals must be
priced and ordered separately except as
noted.
To order, select the appropriate prefix
from the table below and place it in front
of the desired non-interchangeable trip or
interchangeable trip circuit breaker catalog
number. For circuit breaker selection,
refer to pages 6-20 thru 6-124.
Note: Lead times are determined based
on availability of components.
Items marked with ■ or ▲ in this
section may contain components
that are not normally stocked.
Catalog Numbering
Prefix
Enclosure Type
E1S
Type 1 Surface
E1F
Type 1 Flush
E3R
Type 3R
Example:
Catalog number E1SJD63B400 consists of:
(1)
(1)
(1)
(6)
E12
Type 12
E4X
Type 4X Stainless Steel
JD63F400 frame
JD63T400 trip unit
J6N1 enclosure
TA2J6500 wire connectors
Selection And Pricing By Enclosure Type
Circuit Breaker
Breaker
Frame
QJ2-H
ED2
ED4
ED6
Type
3R
Neutrals
Type
12
Type
4, 4X
2
60-225
648.00
840.00
NA
NA
3
60-225
1332.00
1565.00
NA
NA
2
60-225
1236.00
1428.00
NA
NA
3
60-225
1774.00
2007.00
NA
NA
2
60-225
1481.00
1673.00
NA
NA
3
60-225
2190.00
2423.00
NA
NA
2
2
15-60
70-100
437.00
619.00
698.00
880.00
542.00
724.00
3129.00
3311.00
3
3
15-60
70-100
577.00
762.00
838.00
1023.00
682.00
867.00
3269.00
3454.00
2
2
2
15-60
70-100
110-125
670.00
835.00
1657.00
931.00
1096.00
2111.00
775.00
940.00
1835.00
3362.00
3527.00
4227.00
3
3
3
15-60
70-100
110-125
833.00
953.00
1865.00
1094.00
1214.00
2319.00
938.00
1058.00
2043.00
3525.00
3645.00
4435.00
2
2
15-60
70-100
762.00
922.00
1023.00
1183.00
867.00
1027.00
3454.00
3614.00
3
3
3
15-60
70-100
110-125
927.00
1122.00
2143.00
1188.00
1383.00
2597.00
1032.00
1227.00
2321.00
3619.00
3814.00
4713.00
Discount Schedule MCCB
Lug
Catalog
Number
(included)
Catalog
Number
List
Price $
TA1Q300
TA1Q300
ENCLOSED
CIRCUIT BREAKERS
QJH2
Ampere
Rating
Type 1
Surface
or
Flush
5
QJ2
Number
of
Poles
List Price $ — Complete Assembly
Included with
enclosure
TA1Q300
15-25A
SA1E025
30-60A
Line LN1E100
Load LD1E060
70-100
LN1E100
Catalog Number
W53045
included with
enclosure
110-125A
TA1E6125
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-3
Enclosed Circuit Breakers
Complete Assemblies—Molded Case Circuit Breakers
Selection
Selection And Pricing By Enclosure Type
Circuit Breaker
Breaker
Frame
HED4
CED6
List Price $ — Complete Assembly
Number
of
Poles
Ampere
Rating
2
2
2■
15-60
70-100
110-125
1078.00
1219.00
2447.00
1339.00
1480.00
2901.00
1183.00
1324.00
2625.00
3770.00
3911.00
5017.00
3
3
3
15-60
70-100
110-125
1289.00
1376.00
2781.00
1550.00
1637.00
3235.00
1394.00
1481.00
2959.00
3981.00
4068.00
5351.00
2■
2■
15-100
110-125
3027.00
4406.00
3481.00
4860.00
3205.00
4584.00
NA
NA
3
3■
15-100
110-125
3471.00
5156.00
3925.00
5610.00
3649.00
5334.00
NA
NA
ENCLOSED
CIRCUIT BREAKERS
5
Circuit Breaker
Breaker
Frame
FXD6,
FD6
HFD6
CFD6
JXD2
JXD6,
JD6
HJD6
HHJD6
CJD6
Type
3R
Type
12
Type
4, 4X
Lug
Catalog
Number
(included)
List
Price $
Catalog Number
W53045
included with
enclosure
Refer to
page 6-81
List Price $ — Complete Assembly
Neutrals (not included)
Type 1
Surface or
Flush
Number
(included)
Lug
Catalog
Catalog
Number
List
Price $
TA1FD350A
N250 햳
143.00
TA2J6500
W60992 햲
492.00
Ampere
Rating
2■
70-225
250
2081.00
3343.00
2503.00
3765.00
2307.00
3569.00
6617.00
7879.00
3
70-225
250
2599.00
3898.00
3021.00
4320.00
2825.00
4124.00
7135.00
8434.00
2■
70-225
250
4341.00
5603.00
4763.00
6025.00
4567.00
5829.00
8877.00
10139.00
■
3
70-225
250
5242.00
6537.00
5660.00
6959.00
5464.00
6763.00
9774.00
11073.00
3■
70-225
250
6663.00
7369.00
7085.00
7791.00
6889.00
7595.00
NA
NA
2■
200-400
2930.00
4065.00
3397.00
9618.00
3
200-400
3541.00
4676.00
4008.00
10229.00
2■
200-400
3568.00
4703.00
4035.00
10256.00
3
200-400
4211.00
5346.00
4678.00
10899.00
2■
200-400
5684.00
6819.00
6151.00
12372.00
3
200-400
6796.00
7931.00
7263.00
13484.00
Type
3R
Type
12
Type
4, 4X
2■
200-400
6781.00
7916.00
7248.00
13469.00
3■
200-400
8099.00
9234.00
8566.00
14787.00
3■
200-400
8805.00
9974.00
9335.00
NA
CSO – Consult Sales Office for pricing
Catalog
Number
Refer to
page 6-81
Number
of
Poles
■ Built to order. Allow 2–3 weeks for delivery.
5-4
Neutrals
Type 1
Surface
or
Flush
햲 Order
catalog number W60993 neutral for type 4,
4X enclosure or when a 200% neutral is required.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햳 For
200% neutral order catalog number N2250
(List price $258.00)
Discount Schedule MCCB
Enclosed Circuit Breakers
Complete Assemblies—Molded Case Circuit Breakers
Selection
Selection And Pricing By Enclosure Type
Circuit Breaker
List Price $ — Complete Assembly
Neutrals
Number
of
Poles
Ampere
Rating
LXD6,
LD6
2■
450-600
5469.00
6638.00
5999.00
3
450-600
6740.00
7909.00
7270.00
13237.00
HLD6,
HLXD6
2■
250-600
7012.00
8181.00
7542.00
13509.00
Breaker
Frame
Type 1
Surface
Type
3R
Type
12
Type
4, 4X
Catalog
Number
List
Price $
TA2J6500
W60993 햲
436.00
TA3K500
W63623 햳
606.00
11966.00
3
250-600
8798.00
9967.00
9328.00
15295.00
HHLXD6 ,
HHLD6
2■
450-600
8863.00
9802.00
9163.00
15130.00
3■
450-600
10363.00
11532.00
10893.00
16860.00
CLD6
3■
450-600
13683.00
14852.00
14213.00
LMXD6,
LMD6
2■
500-800
CSO
CSO
CSO
NA
3■
500-800
CSO
CSO
CSO
NA
HLMXD6 햴
,
HLMD6
2■
500-800
CSO
CSO
CSO
NA
3■
500-800
CSO
CSO
CSO
NA
MXD6,
MD6
2■
500-800
7436.00
8741.00
9422.00
NA
3■
500-800
9245.00
10550.00
11231.00
NA
HMXD6 햴
,
HMD6
2■
500-800
8707.00
10012.00
10693.00
NA
3■
500-800
10909.00
12214.00
12895.00
NA
CMD6
3■
500-800
15431.00
16736.00
17417.00
NA
햴
Lug
Catalog
Number
(included)
NA
5
ENCLOSED
CIRCUIT BREAKERS
■ Built to order. Allow 2–3 weeks for delivery.
CSO – Consult Sales Office for pricing
햲 For 200% neutral in Type 1, 3R & 12 enclosures use
neutral catalog number W63623.
Discount Schedule MCCB
햳 For
applications requiring 600MCM neutral conductors
(max. 3 in & 3 out) use neutral catalog number W411239
(List price $667.00).
햴 HHLXD6,
HLMXD6 and HMXD6 are only available with
3-pole breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-5
Enclosed Circuit Breakers
Complete Assemblies—Molded Case Circuit Breakers
Selection
Selection And Pricing By Enclosure Type
Circuit Breaker
Breaker
Frame
NXD6
ND6
HNXD6
ENCLOSED
CIRCUIT BREAKERS
5
HND6
Number
of
Poles
List Price $ — Complete Assembly
Ampere
Rating
Neutrals
Type 1
Surface
Type
3R
Type
12
Type
4, 4X
2■
900-1200
CSO
CSO
CSO
NA
3
900-1200
CSO
CSO
CSO
NA
2■
2■
800
900-1200
CSO
CSO
CSO
CSO
CSO
CSO
NA
NA
3
3
800
900-1200
CSO
CSO
CSO
CSO
CSO
CSO
NA
NA
3
900-1200
CSO
CSO
CSO
NA
2■
2■
800
900-1200
CSO
CSO
CSO
CSO
CSO
CSO
NA
NA
3
3
800
900-1200
CSO
CSO
CSO
CSO
CSO
CSO
NA
NA
Lug
Catalog
Number
(included)
Catalog
Number
List
Price $
W63623 햳
606.00
N2000
1056.00
TA3K500
for 800A
2TA4N8500
for 900-1200A
2-Pole
3TA4N8500
for 900-1200A
3-Pole
CND6
3■
900-1200
CSO
CSO
CSO
NA
PXD6 햲
3■
1200-1600
CSO
CSO
NA
NA
TA5P600
PD6 햲
3■
1200-1600
CSO
CSO
NA
NA
TA5P600
HPXD6 햲
3■
1200-1600
CSO
CSO
NA
NA
TA5P600
HPD6 햲
3■
1200-1600
CSO
CSO
NA
NA
TA5P600
CPD6 햲
3■
1200-1600
CSO
CSO
NA
NA
TA5P600
RXD6 햲
3
1600-2000
CSO
CSO
NA
NA
TC5R600
RD6 햲
3■
1600-2000
CSO
CSO
NA
NA
TC5R600
HRXD6 햲
3■
1600-2000
CSO
CSO
NA
NA
TC5R600
HRD6 햲
3■
1600-2000
CSO
CSO
NA
NA
TC5R600
Special Application Complete Enclosures with Ground Fault Protection
The following assemblies are suitable
for use as service entrance devices on
services which require ground fault
protection.
Selection And Pricing By Enclosure Type
Breaker
Type
SND6 w/ground fault■
SHND6 w/ground fault■
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Circuit
Breaker
Installed
Terminal
Connector
Installed
Neutral
Installed
Neutral
Sensor
Installed
1000A
E1SSND69100GN
18904.00
E3RSND69100GN
20209.00
SND69100AG
3TA4N8500
W63623
N10SNDA
1200A
E1SSND69120GN
18904.00
E3RSND69120GN
20209.00
SND69120AG
3TA4N8500
W63623
N12SNDA
1000A
E1SSHND69100GN
20365.00
E3RSHND69100GN
21670.00
SHND69100AG
3TA4N8500
W63623
N10SNDA
1200A
E1SSHND69120GN
20365.00
E3RSHND69120GN
21670.00
SHND69120AG
3TA4N8500
W63623
N12SNDA
■ Built to order. Allow 2–3 weeks for delivery.
CSO – Consult Sales Office for pricing
5-6
햲 Not
assembled — components shipped separately.
Includes connect-all mounting assembly
Catalog Number MB9301.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햳 For
applications requiring 600MCM neutral conductors
(max. 3 in & 3 out) use neutral catalog number W411239
(List price $667.00).
Discount Schedule MCCB
Enclosed Circuit Breakers
Complete Assemblies—Molded Case Circuit Switches
Selection
Selection And Pricing By Enclosure Type
Molded Case Switch
Breaker
Frame
QJ2
ED2
Number
of
Poles
Enclosure Type — List Price $
Ampere
Rating
Type
4, 4X
225
648.00
840.00
NA
NA
1332.00
1565.00
NA
NA
2■
100
619.00
880.00
724.00
3311.00
3
100
762.00
1023.00
867.00
3454.00
2■
100
125
835.00
1657.00
1096.00
2111.00
940.00
1835.00
3527.00
4227.00
3
100
125
953.00
1865.00
1214.00
2319.00
1058.00
2073.00
3645.00
4435.00
2■
100
125
847.00
NA
1183.00
NA
1027.00
NA
3614.00
NA
3
100
125
1122.00
2143.00
1383.00
2597.00
1227.00
2321.00
3814.00
4713.00
2■
100
125
3027.00
4406.00
3481.00
4860.00
3205.00
4584.00
NA
NA
3■
100
125
3471.00
5156.00
3925.00
5610.00
3649.00
5334.00
NA
NA
Molded Case Switch
Catalog
Number
TA1Q300
Included with
enclosure
Refer to
page 6-81
Refer to
page 6-81
Refer to
page 6-81
Type 1
Surface
Type 1
Flush
Catalog Number
W53045
included with
enclosure
Refer to
page 6-81
Enclosure Type — List Price $
Ampere
Rating
List
Price $
Neutrals (not included)
Type
3R
Type
12
Type
4, 4X
2
250
3343.00
3343.00
3765.00
3569.00
7879.00
3
250
3898.00
3898.00
4320.00
4124.00
8434.00
3■
250
7369.00
7369.00
7791.00
7595.00
2■
400
2930.00
NA
4065.00
3397.00
9618.00
3
400
3541.00
NA
4676.00
4008.00
10229.00
Lug
Catalog
Number
(included)
Catalog
Number
List
Price $
TA1FD350A
N250햴
143.00
TA2J6500
W60992
NA
햳
492.00
햳
492.00
JXD6
3
400
4211.00
NA
5346.00
4678.00
10899.00
TA2J6500
W60992
CJD6
3■
400
8805.00
NA
9974.00
9335.00
NA
TA2J6500
W60992 햳
492.00
LXD6
3
600
6740.00
NA
7909.00
7270.00
13237.00
TA2J6500
W60993 햵
436.00
CLD6
3■
600
13683.00
NA
14852.00
14213.00
NA
TA2J6500
W60993 햵
436.00
MXD6
3
800
9245.00
NA
10550.00
11231.00
NA
CMD6
3■
800
CSO
NA
NA
TA3K500
W63623
햶
606.00
3TA4N8500
W63623 햶
606.00
CSO
NA
NXD6
3
1200
CSO
NA
NA
CSO
NA
CND6
3■
1200
CSO
NA
NA
CSO
NA
햲
3■
1600
CSO
NA
NA
NA
NA
TA5P500
N2000
1056.00
RXD6 햲
3■
2000
CSO
NA
NA
NA
NA
TC5R600
N2000
1056.00
PXD6
■ Built to order. Allow 2–3 weeks for delivery.
CSO – Consult Sales Office for pricing
햲 Not assembled — components shipped separately.
Includes connect-all mounting assembly Catalog
Number MB9301.
Discount Schedule MCCB
햳 Order
Catalog Number W60993 neutral for Type 4,
4X enclosure or when a 200% neutral is required.
200% neutral order catalog number N2250 (List price
$258.00)
햵 For 200% neutral in Type 1, 3R & 12 enclosures use
neutral catalog number W63623.
햴 For
햶 For
applications requiring 600 MCM neutral conductors
(Max. 3 in and 3 out) use neutral catalog number
W411239 (List price $667.00).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-7
ENCLOSED
CIRCUIT BREAKERS
Number
of
Poles
Lug
Catalog
Number
(included)
5
JXD2
Type
12
225
CED6
CFD6
Type
3R
3
ED6
FXD6
Neutrals
2■
ED4
Breaker
Frame
Type 1
Surface
or
Flush
Enclosed Circuit Breakers
Enclosures — Type 1
Selection
Dimensions
Figure 1
Figure 3
Figure 2
Type 1
Number Maximum
of
Current
Catalog
Poles
Rating
Number
Fig. Breaker
No. Frame
K.O. Dimensions
Weight
Lb./Ship.
Package
Dimensions (inches)
6 Plcs.
2 Plcs.
A
B
C
D
E
F
G
H
016
071⁄8
051⁄8
033⁄8
053⁄4
033⁄4
11⁄16
—
—
8
171⁄8
0 1
7 ⁄8
0 1
4 ⁄4
141⁄8
0 1
4 ⁄2
15⁄16
—
—
0
32
171⁄8
0 1
7 ⁄8
0 3
4 ⁄4
141⁄8
0 1
4 ⁄2
15⁄16
—
—
7
⁄8, 11⁄8,
13⁄8,
7
⁄8, 11⁄8,
13⁄8,
1
QP, QPH,
HQP
1–2
0060
E0204ML1060S
1
QP, QPH,
HQP
3
0
100
E0303ML3100S
189.00
1
BQ, BQH,
HBQ
3
0
100
EB3100S
189.00
NGG
2-3
125
GG0121FN/SN
139.00
2
ED2, ED4, ED6,
HED4
2–3
0
100
E2N1S
E2N1F
149.00
149.00
008
008
1623⁄32
171⁄2
071⁄2
081⁄2
051⁄16
051⁄16
1345⁄64
1345⁄64
051⁄4
051⁄4
1
1
2
ED4, ED6, HED4,
CED6
2–3
0
125
CED6N1S
CED6N1F
271.00
271.00
014
014
2115⁄32
221⁄4
0719⁄32
081⁄2
057⁄64
057⁄64
181⁄4
181⁄4
051⁄4
051⁄4
1
1
13⁄4, 2
13⁄4, 2
2
FXD6, FD6, FXD6,
FD6, HFD6, HFXD6,
HHFD6, CFD6
2–3
0250
F6N1S
F6N1F
184.00
184.00
033
3813⁄32
1115⁄32
051⁄16
33
08
133⁄64
11⁄8, 13⁄8,
13⁄4, 2,
21⁄2, 3
11⁄8, 13⁄8,
13⁄4, 20,
21⁄2, 3
3
JXD2, JD6,
JXD6, HJD6,
HJXD6, HHJD6,
HHJXD6, SJD6,
SHJD6
2–3
0400
J6N1
258.00
120
413⁄16
2227⁄64
1045⁄64
37
181⁄4
25⁄64
—
—
LD6, LXD6,
HLD6, HLXD6,
HHLD6, HHLXD6,
SLD6, SHLD6,
SCJD6, SCLD6,
CJD6, CLD6
2–3
0600
LD6N1
449.00
101
46
2227⁄64
1045⁄64
42
181⁄4
25⁄64
—
—
2–3
0
800
LMD1
897.00
202
60
2227⁄64
10
557⁄8
181⁄4
25⁄64
—
—
3
MD6, MXD6, SMD6,
HMD6, HMXD6,
SHMD6, ND6, NXD6,
2–3
SND6, HND6, HNXD6,
SHND6, CMD6,
SCMD6, CND6, SCND6
1200
MND61
897.00
202
60
2227⁄64
10
557⁄8
181⁄4
25⁄64
—
—
—
PD6, PXD6, HPD6,
HPXD6, CPD6, RD6,
SPD6, SHPD6, RXD6,
HRD6, HRXD6
2000
PRD6N1 ■
6324.00
350
90
32
28
—
—
—
—
—
5
ENCLOSED
CIRCUIT BREAKERS
List
Price $
3
3
LMXD6, LMD6,
HLMXD6, HLMD6
76.00
00
3
For inches / millimeters conversion,
see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
CSO – Consult Sales Office for pricing
Surface mounted, indoor. If flush mounting is required,
replace suffix “S” in catalog number with suffix “F”.
Also, if outdoor model required, use prefix “W”
instead of “E”.
5-8
Discount
Schedule B.
not include circuit breaker. Order circuit
breaker separately.
Neutral not included. Order as separate item from table
on next page.
Neutral included in enclosure.
Surface mounted, indoor. If outdoor model is required,
use prefix “W” instead of “E”. Not available in flush
(“F”) model.
Does
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Use
for 110-125 ampere ED4, ED6, or HED4
circuit breakers.
Will not accept breaker with shunt trip.
Will not accept 2-pole GFP or breaker with shunt trip.
Includes 100% rated breakers.
Enclosure will accept shunt trip and other internal
accessories except GFP.
Discount Schedule MCCB
Enclosed Circuit Breakers
Enclosures — Type 1
Selection
Dimensions
Figure 4
Figure
Number
Breaker
Frame
4
QJ2, QJH2,
QH2-H
Number
of
Poles
2–3
Maximum
Current
Rating
225
Catalog
Number
List
Price $ 햴
EB3225S
EB3225F
226.00햳 햶
226.00햳 햶
Weight
Lb./Ship. Dimensions (inches)
Package A B
C
D
E
15
27
27
101⁄8 27 101⁄8 51⁄4
101⁄8 281⁄8 111⁄4 51⁄4
F
G
213⁄16 213⁄8
213⁄16 213⁄8
H
J
K
L
23⁄8
23⁄8
3
3
20
20
51⁄16 23⁄4
51⁄16 23⁄4
M
N
P
23⁄4
23⁄4
41⁄2
41⁄2
W53045 햶
Enclosure
Catalog
Number
E2N1(S)(F)
CED6N1(S)(F) 햸
N250
F6N1(S)(F)
W60992
J6N1
W60993
LD6N1
W63623
N2000
LMD1
MND61
PRD6N1
Neutral Cable Capacity
and Wire Range
List
Price $
(1 pc.) #14–2 Cu/Al
Grd. Lug (1 pc.) #14–8 Cu/Al
186.00
(1 pc.) #6–350 kcmil Cu/Al
Grd. Lug (1 pc.) #14–2/0 Cu/Al
(1 pc.) #1/0–750 kcmil Cu/Al or
(2 pcs.) #1/0–300 kcmil Cu/Al
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
143.00
492.00
(2 pcs.) #1/0–600 kcmil
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
436.00
(4 pcs.) 250 kcmil–500 kcmil Cu/Al 햿
Grd. Lug (1 pc.) #6–300 kcmil Cu/Al
606.00
(6 pcs.) #3/0–750 kcmil Cu/Al
Grd. Lug (2 pcs.) #3/0–750 Cu/Al
ENCLOSED
CIRCUIT BREAKERS
Neutral
Catalog
Number
5
Neutrals
1056.00
200% Neutrals (For Type 1, 3R, 4/4X and 12 Enclosures)
Neutral
Catalog
Number
Enclosure
Catalog
Number
N2250
Neutral Cable Capacity
and Wire Range
List
Price $
F6N1(S)(F) 햻
(2 pcs.) #4–350 kcmil Cu/Al
Grd. Lug (1 pc.) #14–2/0 Cu/Al
258.00
W60993
J6N1 햽
(2 pcs.) #1/0–600 kcmil
Grd. Lug (1 pc.) #6-250 kcmil Cu/Al
436.00
W63623
LD6N1 햾
(4 pcs.) 250 kcmil–500 kcmil Cu/Al
Grd. Lug (1 pc.) #6–300 kcmil Cu/Al
606.00
For inches / millimeters conversion,
see Application Data section.
CSO – Consult Sales Office for pricing
햲 Surface mounted, indoor. If flush mounting is required,
replace suffix “S” in catalog number with suffix “F”.
Also, if outdoor model required, use prefix “W”
instead of “E”.
햳 Discount Schedule B.
햴 Does not include circuit breaker. Order circuit
breaker separately.
햵 Neutral not included. Order as separate item from table
on next page.
Discount Schedule MCCB
햶 Neutral
included in enclosure.
mounted, indoor. If outdoor model is required,
use prefix “W” instead of “E”. Not available in flush
(“F”) model.
햸 Use for 110-125 ampere ED4, ED6, or HED4
circuit breakers.
햹 Will not accept breaker with shunt trip.
햻 Also for use with Type 3R, 12, 12K & 4X enclosures
(Catalog numbers F6N3R, F6N12, F6N12K & FD6SS4).
햷 Surface
햽 Also
for use with Type 3R, 12 & 4X enclosures (Catalog
numbers J6N3R, J6N12, & LD6SS4).
for use with Types 3R and 12 enclosures (Catalog
numbers LD6N3R & LD6N12).
햿 For 600 MCM neutral cable (3) in, (3) out (#4–600 kcmil
Cu/Al) use catalog number W411239 (List price $667.00)
햾 Also
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-9
Enclosed Circuit Breakers
Enclosures — Type 3R
Selection
Figure 2
Figure 1
Figure 3
Type 3R
Number Maximum
of
Current
Catalog
Poles
Rating
Number
Figure
Breaker
Number Frame
햷
A
B
C
D
E
F
G
H
081⁄8
051⁄8
043⁄8
—
—
—
—
—
396.00햲
024
231⁄8
101⁄2
045⁄16
20
071⁄2
115⁄16
051⁄4
—
17 ⁄8
0 3
7 ⁄8
0 5
4 ⁄16
—
171⁄8
0 3
7 ⁄8
0
12
179⁄16
725.00
016
1–2
0060
W0204ML1060
2
QPP, QPPH, HQPP
1–4
0225
W0406ML1225CU 햶
2
QP, QPH,
HQP
3
0
100
W0303ML3100
2
BQ, BQH,
HBQ
3
3
0050
100
WB3100 햶
249.00햲
NGG
2-3
125
GG0123RN
377.00
ED2, ED4, ED6,
HED4, HED6
2–3
0
100
E2N3R 햵
410.00
5
햵
Dimensions (inches)
028
햲
QP, QPH
햶
Weight
Lb./Ship.
Package
141.00
2
5
ENCLOSED
CIRCUIT BREAKERS
List
Price $ 햳
햲
249.00
00
9
00
9
14 ⁄8
0 1
4 ⁄2
1 ⁄8
0 11
3 ⁄16
0 5
4 ⁄16
141⁄8
0 1
4 ⁄2
11⁄8
0 11
3 ⁄16
—
0 1
7 ⁄4
0 1
5 ⁄4
1239⁄64
0 1
5 ⁄4
1
0
3
—
22 ⁄64
07 ⁄4
05 ⁄4
17 ⁄8
05 ⁄4
1
03
—
1
1
1
5
CED6
2–3
0125
CED6N3R
1
FXD6, FD6, FXD6,
FD6, HFD6, HFXD6,
HHFD6, CFD6
2–3
0250
F6N3R 햴
606.00
045
381⁄8
141⁄16
073⁄4
339⁄32
08
513⁄16
131⁄2
513⁄16
햸
1
JXD2, JD6,
JXD6, HJD6,
HJXD6, HHJD6,
HHJXD6, SJD6,
SHJD6
2–3
0400
J6N3R 햴
1393.00
126
4063⁄64
263⁄4
1123⁄32
353⁄4
181⁄4
21⁄8
241⁄2
11⁄8
햸
1
LD6, LXD6,
LXD6H, HLD6,
HLXD6, HHLD6,
HHLXD6, CJD6,
CLD6, SCJD6,
SLD6, SHLD6
2–3
0
600
LD6N3R 햴
1618.00
137
4563⁄64
263⁄4
1123⁄32
403⁄4
181⁄4
21⁄8
241⁄2
11⁄8
4
LMXD6, LMD6,
HLMXD6, HLMD6
2–3
0
800
LMD3R 햴
2202.00
210
619⁄64
263⁄4
1123⁄32
5717⁄32
181⁄4
21⁄8
245⁄8
11⁄16
2–3
1200
MND63 햴
2202.00
210
619⁄64
263⁄4
1123⁄32
5717⁄32
181⁄4
21⁄8
245⁄8
11⁄16
MD6, MXD6, SMD6, 햸
HMD6, HMXD6,
SHMD6, ND6, NXD6,
SND6, HND6, HNXD6,
SHND6, CMD6, SCMD6,
CND6,SCND6
1
For inches / millimeters conversion,
see Application Data section.
햲 Discount Schedule B.
햳 Does not include circuit breaker.
Order circuit breaker separately.
5-10
21
1
1
3
1
햴 Neutral
not included. Order as separate item from table
on next page.
included in enclosure.
햶 Will not accept breaker with shunt trip.
햷 Will not accept 2 pole GFP or breaker with shunt trip.
햸 Includes 100% rated breakers.
햵 Neutral
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Enclosed Circuit Breakers
Enclosures — Type 3R
Selection / Dimension
Dimensions
Figure 4
Number Maximum
of
Current
Poles
Rating
QJ2, QJH2, 2
QJ2-H
3
6
225
225
Catalog
Number
List
Price $
Weight
Lb./Ship.
Package
Dimensions (inches)
A
B
C
D
E
F
G
H
J
K
L
M
WB2225
WB3225
418.00
459.00
17
17
27
27
5
55⁄8
0711⁄16
103⁄8
21⁄4
21⁄4
2
2
27⁄8
27⁄8
20
20
41⁄8
41⁄8
35⁄8
51⁄8
23⁄4
23⁄4
23⁄4
23⁄4
—
41⁄2
ENCLOSED
CIRCUIT BREAKERS
Neutrals
Neutral
Catalog
Number
W53045
N250
W60992
W60993
W63623
Enclosure
Catalog
Number
Neutral Cable Capacity
and Wire Range
List
Price $
(1 pc.) #14–2 Cu/Al
Grd. Lug (1 pc.) #14–8 Cu/Al
186.00
F6N3R
(1 pc.) #6–350 kcmil
Grd. Lug (1 pc.) #14–2/0 Cu/Al
143.00
J6N3R
(1 pc.) #1/0–750 kcmil Cu/Al or
(2 pcs.) #1/0–300 kcmil Cu/Al
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
492.00
LD6N3R
(2 pcs.) #1/0–600 kcmil
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
436.00
E2N3R
CED6N3R
LMD3R
MND63
(4 pcs.) 250 kcmil–500 kcmil Cu/Al
Grd. Lug (1 pc.) #6–300 kcmil Cu/Al
606.00
Hubs — see page 5-14.
For inches / millimeters conversion,
see Application Data section.
Discount Schedule B.
Does not include circuit breaker. Order circuit
breaker separately.
Discount Schedule MCCB
Neutral
not included. Order as separate item from table
on next page.
Neutral included in enclosure.
Use CED enclosure for all ED-frame 110-125
ampere units.
200% neutrals are also available. See listing on page 5-9.
5
Figure
Breaker
Number Frame
Figure 5
For
applications requiring 600MCM neutral conductors
(3) in, (3) out (#4-600 kcmil Cu/Al) use neutral catalog
number W411239 (List price $667.00).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-11
Enclosed Circuit Breakers
Enclosures — Types 4, 4X, 7, and 9
Selection / Dimensions
Dimensions
Figure 1
Figure 2
Figure 1
Types 4 and 4X
Number
of
Poles
ENCLOSED
CIRCUIT BREAKERS
5
Breaker
Frame
Maximum
Current
Rating
Catalog
Number
Weight
Lb./Ship.
Package
List
Price $ 햲
ED2, ED4, ED6,
HED4
3
125
ED6SS4
FXD6, FD6,
HFD6, FXD6, FD6
2–3
250
FD6SS4
2–3
600
LD6SS4■
햸
햸
Dimensions (inches)
A
B
C
D
E
5
F
3
2841.00
044
20
16
06
07 ⁄32
09 ⁄4
3
4720.00
106
36
24
08
095⁄32
113⁄4
3
6946.00
145
42
30
10
115⁄32
133⁄4
3
햹
JXD2, JXD6, JD6,
HJD6, HJXD6, HHJD6,
HHJXD6, SJD6, SHJD6,
LXD6, LD6, HLD6,
HLXD6, HHLD6, HHLXD6,
SLD6, SHLD6
햸
Neutrals
Neutral
Catalog
Number
W53045
N250
Enclosure
Catalog
Number햳
햴
햵햷
W60993
햵햷
Neutral Cable Capacity
and Wire Range
List
Price $
ED6SS4
(1 pc.) #14–2 Cu/Al
Grd. Lug (1 pc.) #14–8 Cu/Al
186.00
FD6SS4
(1 pc.) #6–350 kcmil
Grd. Lug (1 pc.) #14–2/0 Cu/Al
143.00
LD6SS4
(2 pcs.) #1/0–600 kcmil
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
436.00
Figure 2
Types 7 and 9 햶
Number
of
Poles
Breaker
Frame
ED2, ED4,
ED6,
HED4
2–3
Maximum
Current
Catalog
List
Rating
Number 햵 햷 Price $ 햲
015–60
070–100
EA■
EB■
Weight
Lb./Ship.
Package
Dimensions (inches)
Mounting
Inside
A
C
1750.00 027
2176.00 032
0 1
5 ⁄2
0
6
B
Knockouts
Outside
D
E
13 ⁄8
18
0 15
5 ⁄16 103⁄4
0 1
6 ⁄2 16
1
F
5 ⁄16
59⁄16
0 7
9 ⁄16
0 7
9 ⁄8
7
Conduit Size
G
H
1
K
Std.
1
Max
14 ⁄4
193⁄8
5
6 ⁄8
611⁄16
5
1 ⁄8
2
1 ⁄4
2
11⁄4
2
CED6
2–3
100
N/A
FXD6, FD6, HFD6,
HFXD6, CFD6
2–3
250
EC2 ■
4815.00 085
101⁄4
225⁄8
113⁄4
20
61⁄2
153⁄8
237⁄8
81⁄4
23⁄4
21⁄2
2
JXD2, JXD6,
JD6, SJD6,
2–3
HJD6, HJXD6,
HHJD6, HHJXD6, SHJD6
200–350
300–400
EC4 ■
EE ■
4815.00 85
0
6662.00 93
0
101⁄4
081⁄2
225⁄8
271⁄8
113⁄4
103⁄4
20
241⁄8
61⁄2
73⁄4
153⁄8
137⁄8
237⁄8
271⁄4
81⁄4
99⁄16
23⁄4
4
21⁄2
3
3
4
LXD6, LD6,
SLD6, HLD6,
HLXD6, HHLD6,
HHLXD6, SHLD6
600
ED6 ■
11330.00 190
117⁄8
403⁄4
133⁄8
377⁄8
77⁄8
181⁄8
425⁄8
97⁄8
35⁄8
4
4
2–3
For inches / millimeters conversion,
see Application Data selection.
■ Built to order. Allow 2–3 weeks for delivery.
햲 Does not include circuit breaker.
Order circuit breaker separately.
5-12
햳 Enclosures
shipped with handle and breaker hardware
packaged within enclosure.
햴 Neutral included.
햵 Neutral not included. Order as separate item.
햶 Breather and drain option is by SPECIAL ORDER only —
add $70.00 to list price.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햷 For
400A max. 4/4x applications which require a 200%
Neutral. See listing on page 5-9.
for use as Service Entrance device.
햹 Includes 100% rated breakers.
햸 Suitable
Discount Schedule MCCB
Enclosed Circuit Breakers
Enclosures — Types 5, 12 and 12K
Selection / Dimensions
Types 5, 12 and 12K
Figure
Number
2
Number
of
Poles
Breaker
Frame
Maximum
Current
Rating
NGG
2–3
125
ED2, ED4, ED6,
HED4
2–3
0100
Catalog
Number
List
Price $ 햳
GG01212N
233.00
E2N12 햲 햵
254.00
햲햵
■
Weight
Lb./Ship .
Package
Dimensions (inches)
A
B
C
D
E
F
012
185⁄8
0811⁄32
071⁄16
18
061⁄16
1
1
5
⁄2
1
CED6
2–3
0125
CED6N12
449.00
016
22 ⁄8
08 ⁄32
07 ⁄16
22
06 ⁄16
2
FXD6, FD6, FXD6,
FD6, HFD6, CFD6
2–3
0250
F6N12 햲 햴
410.00
040
3819⁄32 1429⁄64
081⁄8
34
13
23
3
JXD2, JD6, JXD6,
HJD6, HJXD6,
HHJD6, HHJXD6, SJD6,
SHJD6
2–3
0400
J6N12
725.00
104
411⁄2
215⁄8
117⁄8
375⁄32
203⁄8
5
3
LD6, LXD6, HLD6,
HLXD6, HHLD6, HHLXD6,
SLD6, SHLD6, CJD6,
CLD6, SCJD6, SCLD6
2–3
0600
LD6N12 ■
979.00
104
461⁄2
215⁄8
117⁄8
425⁄32
203⁄8
5
4
LMXD6, LMD6,
HLMXD6, HLMD6
2–3
0800
LMD12 ■
2883.00
220
—
—
—
—
4
햹
MD6, MXD6, SMD6,
HMD6, HMXD6, SHMD6,
ND6, NXD6, SND6, HND6,
HNXD6, SHND6, CMD6,
SCMD6, CND6, SCND6
2–3
1200
MND612 햴 ■
2883.00
220
60
373⁄8
10
005⁄8
5
11
1
⁄8
⁄32
⁄8
⁄8
—
—
3
2
5
Dimensions
ENCLOSED
CIRCUIT BREAKERS
Figure 2
Figure 3
Figure 1
Neutrals
Neutral
Catalog
Number
W53045 햵
Enclosure
Catalog
Number
E2N12
CED6N12 햶
Neutral Cable Capacity
and Wire Range
List
Price $
(1 pc.) #14–2 Cu/Al
(1 pc.) #14–2 Cu/Al
186.00
143.00
N250 햴 햷
F6N12
(1 pc.) #6–350 kcmil
Grd. Lug (1 pc.) #14–2/0 Cu/Al
W60992 햴 햷
J6N12
(1 pc.) #1/0–750 kcmil Cu/Al or
(2 pc.) #1/0–300 kcmil Cu/Al
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
L6N12
(2 pcs.) #1/0–600 kcmil
Grd. Lug (1 pc.) #6–250 kcmil Cu/Al
436.00
(4 pcs.) 250 kcmil–500 kcmil Cu/Al
Grd. Lug (1 pc.) #6–300 kcmil Cu/Al
606.00
W60993 햴 햷
W63623 햴
LMD612
MND612
For inches/millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
CSO – Consult Sales Office for pricing.
햲 Catalog Number is for Type 12. If Type 12K with knockouts
is required, add suffix “K” to catalog number.
Discount Schedule MCCB
햳 Does
not include circuit breaker.
Order circuit breaker separately.
햴 Neutral not included. Order as separate item.
햵 Neutral included in enclosure.
햶 Use CED enclosure for all ED-frame 110–125
ampere units.
492.00
Figure 4
햷 200%
neutrals are also available. See listing on page 5-9.
600 MCM neutral cable (3) in, (3) out (#4-600 kcmil
Cu/Al) use catalog number W411239 (List price $667.00)
햹 Includes 100% rated breakers.
햸 For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5-13
Enclosed Circuit Breakers
Enclosures — Knockout and Hub Data
Dimensions
Knockouts & Wire Bending Space
Types 1, 12 and 12K
Type 3R
Number of Knockouts Per Panel (Type 4, 4X, 12 have no KO’s)
Breaker
Frame
Conduit Range
Per Knockout
Outside Dimensions
(inches)
Top
Bottom
Side
Back
Bottom
Side
⁄2, ⁄4, 1, 1 ⁄4, 1 ⁄2
4
4
4
4
3
1
1
2
71⁄8" high encl. #6 햴
⁄4, 1, 11⁄4
1
1
2
2
8
1
3
2
햵
1
BQ, BQH, HBP
70–100
3
QPP, QPPH, HQPP
125–225
1
⁄2, 3⁄4, 1, 11⁄4, 11⁄2, 2, 21⁄2
—
—
—
—
4
1
1
21⁄2
250 kcmil
QJ
11⁄2, 2, 21⁄2, 3
2
2
2
2
3
1
1
21⁄2
햵
NGG
3
⁄4, 1, 11⁄4, 11⁄2, 2, 21⁄2
—
—
—
—
—
—
—
—
ED2, ED4, ED6,
HED4
7
⁄8, 11⁄8, 13⁄8, 13⁄4, 2
2
2
2
2
2
1
1
2
햵
⁄8, 11⁄8, 13⁄8, 13⁄4, 2
2햲
2햲
—
—
2
—
—
2
2
2햳
2햳
—
1
1
2
햵
⁄8, 11⁄8, 13⁄8, 13⁄4, 2, 21⁄2
햳
햳
4
햵
3
1
1
7
5
Maximum Cable Sizes
Recommended (Cu/Al)
for Type 1, 3R, 4, 4X,
12 & 12K Enclosures 햶 햷
QP, QPH, HQP
15–125
CED6
ENCLOSED
CIRCUIT BREAKERS
Back
Maximum
Hub Size
(inches)
Type 3R
7
1
1
2
1
1
—
1
1
—
—
1
—
—
11⁄2, 2, 21⁄2, 3, 31⁄2, 4
1
1
2
4
—
—
—
4
(2) 600 kcmil
LXD6, LD6, HLXD6,
HLD6, HHLD6, HHLXD6,
SLD6, SHLD6
11⁄2, 2, 21⁄2, 3, 31⁄2, 4
1
1
2
4
—
—
—
4
(2) 600 kcmil
LMXD6, LMD6
HLMXD6, HMLD6
—
—
—
—
—
—
—
—
4
(3) 600 kcmil
MD6, SMD6, HMD6
ND6, SND6, HND6
—
—
—
—
—
—
—
—
4
(3) 600 kcmil or
(4) 500 kcmil
FXD6, FD6, FXD6, FD6
HFD6, CFD6
11⁄8, 13⁄8, 13⁄4, 2, 21⁄2, 3
JXD2, JXD6, JD6,
HJD6, HJXD6, HHJD6,
HHJXD6, SJD6, SHJD6
2
(CFD6 only 300 kcmil)
Hubs (Type 3R)
Conduit
Size
(inches)
Catalog
Number
List
Price $
03⁄4
1
11⁄4
11⁄2
2
ECHS075
ECHS100
ECHS125
ECHS150
ECHS200
39.50
39.50
39.50
39.50
69.00
QPP, QPPH, HQPP,
QJ2, QJH2, QJ2-H
11⁄4
11⁄2
2
21⁄2
ECHS125
ECHS150
ECHS200
ECHS250
39.50
39.50
69.00
109.00
ED2, ED4, ED6,
HED4, HED6, HHED6,
CED6
03⁄4
1
11⁄4
11⁄2
2
ECHR075
ECHR100
ECHR125
ECHR150
ECHR200
40.00
39.50
39.50
40.00
70.00
FXD6, FD6, HFD6, HFXD6,
CFD6, JXD2, JD6,
JXD6, HJD6, HJXD6,
LD6, LXD6, HLD6,
HLXD6(A)
21⁄2
3
31⁄2
4
ECHV250
ECHV300
ECHV350
ECHV400
125.00
182.00
274.00
362.00
Breaker
Frame
QP, QPH, HQP,
BQ, BQH, HBQ,
NGG
For inches / millimeters conversion,
see Application Data section.
햲 Type 12K only.
햳 Type 12K enclosure has no knockouts this location.
5-14
햴 171⁄8"
high enclosure provides sufficient wire bending
space for all available CB lugs.
햵 Sufficient wire bending space is provided for all
available mechanical type CB lugs.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Note: Enclosures for 250A max breakers
have a hub provision on the rainshed.
Enclosures for larger breakers (J, L, M
& N frame) have blank top
rainsheds. Drill or punch hole in the
field to accommodate hub size desired.
햶 The
use of cables larger than those listed below may
violate NEC & UL wire bending space requirements.
use of compression type connectors will violate
NEC and UL wire bending space requirements.
햷 The
Discount Schedule MCCB
6SPEEDFAX
TM
2007-2008 Molded Case Circuit Breakers
Contents
6-34 – 6-36
6-37 – 6-39
6-40 – 6-43
6-44 – 6-47
6-48 – 6-50
6-51 – 6-54
6-55 – 6-58
6-59 – 6-61
6-62 – 6-63
6-64 – 6-65
6-66 – 6-68
6-69 – 6-71
6-72
6-73 – 6-74
6-75 – 6-78
6-79 – 6-80
6-81 – 6-83
6-84
6-85
6-86 – 6-91
6-92 – 6-95
6-96 – 6-99
6-100 – 6-103
6-104 – 6-107
6-108 – 6-111
6-112 – 6-115
6-116 – 6-119
6-120 – 6-122
6-123
6-124
6-125 – 6-139
6-140
6-141
6-142 – 6-143
6-144 – 6-145
6-146 – 6-150
6-151 – 6-152
6-153
6-154
6-155 – 6-157
MOLDED CASE
CIRCUIT BREAKERS
Residential Commercial Industrial
6-2 – 6-3
6-4
6-5 – 6-7
6-8 – 6-17
6-18 – 6-19
6-20
6-21
6-22 – 6-23
6-24 – 6-25
6-26
6-27
6-28
6-29
6-30
6-31
6-32 – 6-33
6
What’s New in Circuit Breakers
Federal Specifications Classification
Catalog Numbering System
Reference Guides
Panelboard Mounting 240V Circuit Breakers
Special Application Panelboard Mounting 240V Circuit Breakers
BQD 100A Frame 480/277V Circuit Breakers
NGB 125A Frame Panelboard 480/277V Breaker and Internal Accessories
EB 125A Frame Panelboard Mounting 480V Breaker and Internal Accessories
Lug-In/Lug-Out 240V Breakers w/INSTA-WIRE
BQXD DIN Rail Mounted 240V Circuit Breakers
QJ 225A Frame
CQD 100A Frame
NGG 125A Frame
Internal Accessories for CQD100A and NGG 125A Circuit Breakers
EG 125A Frame Circuit Breakers and Internal Accessories
Sentron Thermal Mag and Electronic Circuit Breakers
ED 125A Frame and Internal Accessories
FD 250A Frame and Internal Accessories
JD/SJD 400A Frame and Internal Accessories
LD/SLD 600A Frame and Internal Accessories
LMD 800A Frame and Internal Accessories
MD/SMD 800A Frame and Internal Accessories
ND/SND 1200A Frame and Internal Accessories
PD/SPD 1600A Frame and Internal Accessories
RD 2000A Frame and Internal Accessories
STD 3200A Frame and Internal Accessories
Magnetic Trip Only—ETI Motor Circuit Protector
Adjustable Instantaneous Magnetic Trip Settings
Molded Case Switch—Circuit Disconnect
Sensitrip III Digital Solid State Sentron Series
WL Power Circuit Breakers—Insulated Case Circuit Breakers
Electronic and Communications Accessories
Lug Information
Breaker Modifications
Internal Accessories—Feature Combinations
External Accessories
VL Thermal Mag and Electronic Circuit Breakers
Overview
DG 150A Frame and Internal Accessories
FG 250A Frame and Internal Accessories
JG 400A Frame and Internal Accessories
LG 600A Frame and Internal Accessories
MG 800A Frame and Internal Accessories
NG 1200A Frame and Internal Accessories
PG 1600A Frame and Internal Accessories
Molded Case Switch
Molded Case Protector
External Accessories
Accessory Locations
Suffix for Internal Accessories
Technical Data
Unusual Operating Conditions
General Technical
Series Short Circuit Ratings
Unusual Operating Conditions
IEC 947—2 AC Interrupting Ratings
Typical Specifications
Superseded Circuit Breakers
Molded Case Circuit Breakers
Introduction
Molded Case Circuit Breakers
OEM Circuit Breakers
In this issue of the Speedfax, Siemens introduces the modular and flexible design of
Siemens VL molded case circuit breakers (MCCB) for OEM applications.
This family of MCCB’s allow the OEM customer the flexibility of last minute changes,
with a minimum level of stock due to product modularity. The VL family of MCCB’s
also offer the widest range of field installable accessories in the industry.
Ratings
Voltage
Standards
30-1600A
600Vac
690Vac (IEC)
UL, CSA, NOM, IEC, CE Marked
Interruption Ratings (UL/CSA)
N
H
L
35kA @ 480Vac
65kA @ 480Vac
100kA @ 480Vac
Panelboard Application Circuit Breakers
MOLDED CASE
CIRCUIT BREAKERS
6
Two new MCCB offerings for Panelboard applications are introduced in this issue.
NGB—The new NGB is a quick bolt-in panelboard
molded case circuit breaker based on the compact
design of the highly successful Siemens NGG
(cable-in / cable-out) MCCB.
Ratings
15-125A
Poles
1, 2, 3
Voltage
480Y/277
AIC
25kA @ 480Vac
Standards
UL, CSA, NOM
EB—The new EB circuit breaker is also
a compact quick bolt-in design for panelboard
application only.
Ratings
Poles
Voltage
AIC
Standards
15-125A
1, 2, 3
600Y/347
35-65kA @ 480Vac
UL, CSA, NOM, CE Marked
Sentron Molded Case Circuit Breakers
Note: The SENTRON family continues to be the standard offering of MCCB’s for all applications, with the exception of 800A-1600A for
Siemens panelboard and switchboards. These products will incorporate the new VL series of circuit breakers.
6-2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Introduction
Ordering
500V DC Wiring Configuration
Connecting Breakers for DC
Application
Most Siemens thermal magnetic trip
MCCBs are applicable on direct current
(dc) systems. Generally, for 250 V dc
systems a two pole breaker is used,
with one pole on each leg of the supply
circuit. For three pole breakers applied on
500 V undergrounded DC systems, it is
important to connect the power supply
“zig-zag” through the breaker as shown
in the figure below. This assures that the
Voltage between phases on the breaker
terminals is uniformly distributed.
MOLDED CASE
CIRCUIT BREAKERS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6
In the FD through RD frames, you may
order molded case circuit breakers three
basic ways:
▪ As separately ordered frames, trip
units and lugs
▪ As frame, trip unit and lugs ordered as
one catalog number and shipped
unassembled or assembled
▪ As Frame and Trip Unit shipped
assembled and with the trip unit made
non-removable, in compliance with UL
489 requirements that to be reverse
fed the circuit breaker must not have
an interchangeable trip unit.
These two options are described in the
following:
Components Ordered Separately
To get the components for a 3-pole, 400
Amp standard interrupting circuit breaker,
you would order the frame (JD63F400),
the trip unit (JD63T400) and six lugs
(TA2J6500). This option is normally
useful only if you stock and use large
volumes of product and wish to reduce
your inventory cost. You may stock, for
example, a smaller number of frames
(JD63F400) and a variety of trip units
(JD63T300, JD63T350, etc.) and
assemble breakers as you need them.
Frame, Trip Unit and Lugs
Ordered Together
If you order the catalog number
JD63B400, you will receive a frame, a
trip unit and 6 lugs in separate packages.
By suffixing this number with “L” (e.g.
JD63B400L), you will receive frame, trip
unit and lugs assembled in one container.
Pursuant to UL 489, a product ordered
thus will have the markings “LINE” and
“LOAD”, and may not be “reverse fed”
(with power flowing from the “OFF” end
of the breaker toward the “ON” end).
Non-Interchangeable Trip Breakers
If you place an “X” after the frame size
designator (e.g. JXD63B400), you will
receive a frame and trip unit assembled,
with the trip unit made non-removable.
If you suffix an “L” to this catalog
number (e.g. JXD63B400L), you will
receive the breaker, non-removable trip
unit and lugs assembled. Unless you
anticipate a specific need to change the
breaker's ampere rating in the future,
this is the preferred ordering method, as
the products are assembled to Siemens'
specifications in our factories. These
breakers are suitable for use reverse fed
according to UL 489, since the trip unit is
not removable.
The smaller frames (QJ, ED and below)
do not have removable trip units, and
consequently are shipped only as
assembled products. To add lugs,
see the ordering instructions on
each product's catalog page.
6-3
Molded Case Circuit Breakers
Federal Specification Classification
Reference
W-C-375C/GEN
Interrupting Rating
Class
Symmetrical Amperes
햲
햴
Volts AC 60HZ
Poles
10a햳
5,000
120/240
1 or 2
15–100
10b
5,000
240
2 or 3
15–100
QP, BQ, BQD, CQD, BL
11a
7,500
120
1
15–100
QP, BQ, BQD, CQD, BL
11b
7,500
12a햳
10,000
Range of Current Trip
QP, BQ, QT, BL
240
2 or 3
15–100
QP, BQ, BQD, CQD, BL
120/240
1 or 2
15–100
QP, BQ, QT, ED2, BL
12b
10,000
240
2 or 3
15–225
QP, BQ, QJ2, ED2, BQD, CQD, BL
12c
10,000
277
1
15–100
BQD, CQD, NGG, NGB, NEG, NEB
13a
14,000
277
1
15–100
ED4, BQD, CQD, NGG, NGB, NEG, NEB
13b
14,000
277/480
1, 2, or 3
15–100
ED4, BQD, CQD
14a
22,000
120/240
1 or 2
15–100
QPH, BQH, BLH
14b
22,000
240
2 or 3
70–400
QJH2, QJ2-H, BQH, BQD, CQD, BLH
15a
65,000
120/240
1 or 2
15–100
HQP, HBQ, ED4, HED4, NGG, NGB, NEG, NEB
15b
65,000
240
2 or 3
15–225
ED6, ED4, FXD6, FD6, HED4, BQD, CQD, HQJ2H,
NGG, NGB, NEG, NEB
16a
100,000
480
2 or 3
15–225
CFD6, CED6
16b
100,000
600
2 or 3
15–600
CED6, CFD6, CJD6, SCJD6, CLD6, SCLD6
17a
200,000
600
2 or 3
70–2000
—
18a
18,000
14,000
14,000
240
480
600
2 or 3
15–125
ED6, HED6, HHED6
19a
22,000
18,000
14,000
240
480
600
2 or 3
70–225
FXD6, FD6, CFD6, HFD6
20a
25,000
22,000
22,000
240
480
600
2 or 3
70–225
FXD6-A, FD6-A, CFD6, HFD6
21a
42,000
30,000
22,000
240
480
600
2 or 3
70–800
HFD6, CFD6, JXD6(A), JD6(A), SJD6(A), HJD(A),
HJXD6(A), HHJD6, SHJD6(A), CJD6, SCJD6,
LXD6(A), LD6(A), SLD6(A), HLD6(A), HLXD6(A),
HHLD6, SLD6(A), SHLD6(A), CLD6, SCLD6,
LMD6, LMXD6, HLMD6, HLMXD6, MD6, MXD6,
SMD6, HMD6, HMXD6, SHMD6, CMD6, SCMD6
22a
65,000
25,000
18,000
240
480
600
2 or 3
15–125
CED6, ED6, HED6, HHED6, FXD6-A, FD6-A
HHED6, FXD6-A, FD6-A, HFD6, HHFD6, CFD6,
JD6(A), JXD6(A), SJD6(A), HJD6(A), HJXD6(A),
SHJD6(A), HHJD6, HHJXD6, CJD6, SCJD6,
LXD6(A), LD6(A), SLD6(A), HLD6(A), HLXD6(A),
SHLD6(A), HHLD6, HHLXD6, CLD6, SCLD6,
LMD6, LMXD6, HLMD6, HLMXD6, MD6, MXD6,
SMD6, HMD6, HMXD6, SHMD6, CMD6, SCMD6,
ND6, NXD6, SND6, HND6, HNXD6, SHND6,
CND6, SCND6
6
MOLDED CASE
CIRCUIT BREAKERS
Breaker Type
(All Circuit Breakers Meet or Exceed
the Indicated Class Level)
23a
65,000
35,000
25,000
240
480
600
2 or 3
70–1200
24a
65,000
50,000
42,000
240
480
600
2 or 3
1200–2000
25a
125,000
80,000
60,000
240
480
600
2 or 3
600–4000
Applicable Standards
UL489 — Molded Case Circuit Breakers
and Circuit Breaker Enclosures.
UL486A — Wire Connectors and
Solderless Lugs for use with copper wire
Note:
(A) Molded case circuit breakers are designed and tested
in accordance to applicable portions of UL489 and meet
application requirements of the National Electric Code.
Unless marked otherwise, circuit breakers are 80% duty rated.
(B) Molded case circuit breakers are to be connected with 60 or
6-4
UL486B — Wire Connectors and
Solderless Lugs for use with
aluminum wire
UL943 — Ground Fault Interrupters (for
personnel protectors)
UL1087 — Molded Case Switches
75°C wire for circuit breakers having a rated ampacity of
100 amperes or less. Circuit breakers having a rated ampacity
greater than 100 amperes shall only be cabled with 75°C
cable unless otherwise indicated on the circuit breaker
label. Exceptions to this rule are outlined in the article
110-14 C(1)(2) of the 2005 National Electric Code.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
PD6, PXD6, HPD6, HPXD6, CPD6
RD6, RXD6, HRD6, HRXD6, SPD6, SHPD6
HHLD6, CLD6, CMD6, CND6
SCLD6, SCMD6, SCND6, CPD6
UL50 — Cabinets and Boxes
UL869 — Service Equipment
NEMA AB-1 — Molded Case Circuit
Breakers and Molded Case Switches
CSA–C22.2 No. 5, C22.2 No. 14
햲 Interrupting
ratings are not limited to the values or groups of
values listed. However, the values listed are minimum values
for the class specified.
햳 Single-unit or duplex construction must be specified.
햴 Use minimum frame size for ampere rating.
Molded Case Circuit Breakers
Catalog Numbering System
Selection/Application
If used on 250A frame and above means
non-interchangeable trip breaker with
factory assembled frame and trip. Solid
state trip and current limiting (S or C in
first character) are non-interchangeable
only, and the “X” is omitted.
X D
Trip Unit Type
— Omitted – Thermal-Magnetic
S — Sensitrip® Electronic Trip
Sentron Series Type/Interrupting Range
— Omitted – Standard Rating
H — High IC Rating
HH — Extra High IC Rating
C — Highest IC Rating and Current Limiting
Frame Identifier
E — Type ED
F — Type FD
J — Type JD
L — Type LD
LM — Type LMD
M
N
P
R
T
—
—
—
—
—
Type
Type
Type
Type
Type
MD
ND
PD
RD
TD
Maximum Voltage
2 — 240 Vac
4 — 480 Vac
6 — 600 Vac
Number of Poles
1
2
3
9 used to indicate the max. functions for an electronic trip circuit breaker (always 3 poles)
6
(Specific Application Type)
B — Standard 40°C Breaker
M — Calibrated for 50°C Application
F — Frame Only
T — 40°C Trip Unit Only
W — 50°C Trip Unit Only
S — Molded Case Switch
L — Low Instantaneous Range ETI Breaker
A — Standard Range ETI Breaker
H — High Instantaneous Range ETI Breaker
MOLDED CASE
CIRCUIT BREAKERS
Maximum Continuous Current Rating
ED Frame — 015, 020, 025, 030, 035, 040, 045, 050, 060, 070, 080, 090, 100, 110, 125
FD Frame — 070, 080, 090, 100, 110, 125, 150, 175, 200, 225, 250
JD Frame — 200, 225, 250, 300, 350, 400
LD Frame — 250, 300, 350, 400, 450, 500, 600
LMD Frame — 500, 600, 700, 800
MD Frame — 500, 600, 700, 800
ND Frame — 900, 100 (1000A), 120 (1200A)
PD Frame — 120 (1200A), 140 (1400A), 160 (1600A)
RD Frame — 160 (1600A), 180 (1800A), 200 (2000A)
TD Frame — 2000, 2500, 3200
Suffix
L — where applicable indicates a breaker shipped with line/loads lugs installed
A — used with a switch to show automatic self protection
Y — 400 Hertz
H — 100% rated
P — Load side lugs only
NOTE:
— Position omitted if not used.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-5
VL Molded Case Circuit Breakers
Catalog Numbering System
Selection/Application
Interrupting Class
N — Normal
H — High
L — Very High
C — Trip Unit Only
Frame Family
G — Type GG
E — Type EG
D — Type DG
F — Type FG
J — Type JG
L —
M—
N—
P —
Type LG
Type MG
Type NG
Type PG
Breaker Type
G — Global (UL, IEC, CE, CSA, NOM)
T — Trip Unit Only (Global)
H — 100% rated
X — Non-Interchangeable
M — Motor Circuit Protector
S — Molded Case Switch
J — 240V only rated, Non-interchangeable only
Y — 100% rated, Non-interchangeable
N — Naval
Number of Poles
1, 2, 3, 4, 5 (4P w/ neutral protection)
MOLDED CASE
CIRCUIT BREAKERS
6
Trip Unit
B — Thermal Magnetic, standard 40° C ambient
C — Thermal Magnetic, calibrated for 50° C ambient (non-UL)
D — Electronic w/ LCD, LSI, 3P or 4P (neutral protected)
E — Electronic w/ LCD, LSIG, 3P/4W (selectable residual or
return type ground fault protection)
F — Frame only, without trip unit
H — Magnetic only, Motor Circuit Protector - High
instantaneous range
L — Magnetic Only, Motor Circuit Protector - Low
instantaneous range
M — Magnetic Only, Motor Circuit Protector - Standard
instantaneous range
N — Electronic LI, 3P or 4P (neutral protected)
P — Electronic LSI, 3P or 4P (neutral protected)
S — Molded Case Switch
U — Electronic, LSIG, 3P/4W or 4P, residual ground fault protection
X — Electronic, LIG, 3P/4W or 4P, residual ground fault protection
Continuous Current Rating
For GG use 015, 020, 025, 030, 035, 040, 050, 060, 070, 080, 090, 100, 110, 125
For EG use 015, 020, 025, 030, 035, 040, 050, 060, 070, 080, 090, 100, 110, 125
For DG use 050, 060, 070, 080, 090, 100, 110, 125, 150
For FG use 100, 110, 125, 150, 175, 200, 225, 250
For JG use 250, 300, 350, 400
For LG use 400, 500, 600
For MG use 600, 700, 800
For NG use 800, 900, 100 (1000A), 120 (1200A)
For PG use 120 (1200A), 140 (1400A), 160 (1600A)
Terminations
B — Load End Standard (cu/al) Lugs
L — Line & Load Standard (co/al) Lugs
X — No Lugs (use only if accessory suffixes are to follow)
Accessories
Auxiliary and Alarm Switch Combinations
Suffix
Description
A1 — 1 Alarm (includes 1NO & 1NC switch with a 2 Aux./1 Alarm Base, for frames EG to JG)
A2 — 2 Aux (1NO & 1NC switch with a 3 Aux. Base, for frames EG to JG)
A3 — 2 Aux + 1 Alarm (2NO & 2NC switches with a 2 Aux./1 Alarm Base, for frames EG to JG)
A3 — 2 Aux + 2 Alarm (2NO & 2NC switches with a 2 Aux./2 Alarm Base, for frames LG to PG)
A4 — 4 Aux (2NO & 2NC switches with a 4 Aux. Base, for frames LG to PG)
Shunt Trips
RB — 24 VDC
RM — 48-60 VAC
RC — 48-60 VDC
RN — 110-127 VAC
RD — 110-127 VDC
RS — 208-277 VAC
RE — 250 VDC
RV — 380-600 VAC
Under Voltage Releases
UA — 12 VDC
UN
UB — 24 VDC
UP
UC — 48 VDC
UR
UD — 110-127 VDC
US
UE — 220-250 VDC
UT
UG — 60 VDC
UU
UV
6-6
— 110-127 VAC
— 208 VAC
— 220-250 VAC
— 277 VAC
— 380-415 VAC
— 440-480 VAC
— 600 VAC
Note: A1 and A3 include 1NO and 1NC switch for
alarm purposes, only one of these switches may
be used as there is only one space for an alarm.
LCD = Liquid Crystal Display
LS = Long Delay & Short Delay trip functions
LSI = Long Delay, Short Delay, & Instantaneous trip functions
LSIG = Long Delay, Short Delay, Instantaneous, & Ground Fault trip functions
GF = Ground Fault
3P = 3-pole
4W = 4-wire
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
VL Circuit Breakers
Catalog Numbering System
Selection
If ordering factory-installed accessories or special modifications, you must order a 15-digit catalog number. See the examples
below for a detailed explanation. The 15 digit number is achieved by placing X’s in positions not being occupied by an
accessory/modification.
Auxiliary Switch Example:
HFG3B200L A2 XXXX
Standard 9-digit
Aux. Switch Completes Cat #
Shunt Trip / UVR Example:
HFG3B200L XX UN XX
Standard 9-digit
UVR
Completes Cat #
Shunt Trip / Auxiliary Switch Example:
HFG3B200L A2 RN XX
Standard 9-digit
Aux.
Switch
Shunt Completes
Trip
Cat #
Factory Modification Example:
HFG3B200L XXXX Z1
Completes Cat # Custom Mod.
6
Standard 9-digit
These places could designate an enclosure or special modification.
Siemens will define the factory modification suffixes.
MOLDED CASE
CIRCUIT BREAKERS
Non-Interchangeable Trip Breakers Example:
HFX3B200L
Standard 9-digit
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-7
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
Plug-In Breakers
QT
Page
Poles
Amperes, Continuous
1-Pole
Volts (50/60 Hertz)
AC
Ratings
6
1-27, 1-29 1-27, 1-29 1-24, 1-29 1-24, 1-29 1-29
1, 2, 3
1, 2, 3
1, 2, 3 2
10–125 10–125 10–125 100–225
120/240
120/240
120/240
BLH
HBL
BQD,
BQD6 NGB
6-18
6-18
6-18
6-21
6-22
2,3
1, 2, 3, 1, 2, 3
1, 2, 3 1, 2, 3 1, 2, 3
150–200 10–125 10–125 10–100 15–100 15–125
120/240 120/240 120/240 120/240
277
347
480/277 600/347
—
240
240
240
240
240
240
240
240
480/277 600/347
120V
10,000
10,000
22,000
65,000
—
—
10,000
22,000
65,000
65,000
100,000
240V
10,000
10,000
22,000
65,000
100,000
10,000
10,000
22,000
65,000
65,000
100,000
25,000
—
—
—
—
—
—
—
—
14,000
—
—
—
—
—
—
—
—
10,000 14,000
480/277V —
—
—
—
—
—
—
—
—
14,000
600/347V —
—
—
—
—
—
—
—
—
10,000 14,000
Volts — 2-Pole
—
—
—
—
—
—
—
—
—
250
Interrupting Rating — DC Amperes
—
—
—
—
—
—
—
—
—
14,000
14,000
—
2.87
2.87
—
—
7.00
3.56
3.56
—
4.50
—
25,000
250
15–30A
—
—
—
—
—
—
—
3.75
—
—
—
15–60A
3.12
—
—
—
—
—
—
—
—
—
—
55–125A —
3.12
3.12
3.12
3.12
3.00
3.75
—
3.75
4.50
—
1-Pole
1.00
1.00
1.00
1.00
—
—
1.00
1.00
1.00
1.00
—
2-Pole
2.00
2.00
2.00
2.00
4.00
2.00
2.00
2.00
2.00
—
3-Pole
2.00
3.00
3.00
3.00
—
3.00
3.00
3.00
3.00
3.00
—
Depth
2.06
2.37
2.37
2.37
2.37
2.34
2.37
2.37
2.69
2.23
—
Thermal and Fixed Magnetic Trip
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Molded Case Switch
—
⻫
—
—
—
—
—
—
—
—
—
Undervoltage Trip
—
—
—
—
—
—
—
—
—
—
—
Shunt Trip
—
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
Width
MOLDED CASE
CIRCUIT BREAKERS
1-25
BL
—
Dimensions in
inches
Individual
Enclosures
HQPPH QPJ
—
Height
Accessories &
Modifications
HQP,
HQPP
3-Pole
15–50A
Overcurrent
Devices
Panelboard Breakers
QPH,
QPPH
1, 2
15–50
120/240 120/240
2-Pole
UL Interrupting Rating —
277V
Symmetrical RMS Amperes
347V
DC
QP,
QPP
Auxiliary Switch
—
—
—
—
⻫
—
⻫
⻫
⻫
⻫
⻫
Alarm Switch
—
—
—
—
—
—
—
—
—
⻫
⻫
Type 1 — Indoor Surface
⻫
⻫
⻫
⻫
⻫
—
—
—
—
—
—
Type 1 — Indoor, Flush
—
⻫
⻫
⻫
⻫
—
—
—
—
—
—
Type 3R — Outdoor-Rainproof
—
⻫
⻫
⻫
⻫
—
—
—
—
—
—
QP, QPH, HQP
BL, BLH, HBL
BQD, BQD6
For inches / millimeters conversion, see Application Data section.
BQD6
Single
Types
125A,
CSA certified 10,000A @ 600Y/347V 15–70A only.
QPP, QPPH, HQPP and HQPPH are special 2-pole
configurations for load center mains. Amperage range =
125–225A, width = 4 in.
6-8
pole breakers available in ratings 10–70A only.
2-pole 120/240V AC only.
Not applicable to types QPP and QPPH.
Single pole circuit breakers available in ratings 15-70A only,
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
125A available as a 2-pole only.
applicable to type HQPP and HQPPH.
Fits only Siemens EQIII load centers. Breaker is 2 or 3
poles wide.
Not
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
General Purpose Breakers
BQ
BQH
HBQ
QJ2
QJH2
QJ2-H
HQJ2-H
CQD
6-26
6-26
6-26
6-28
6-28
6-28
6-28
6-29
6-30
1, 2, 3
1, 2, 3
1, 2, 3
2, 3
2, 3
2, 3
3
1, 2, 3
1, 2, 3
1-Pole
15–70
15–70
15–50
—
—
—
—
15–100
15–125
2-Pole
15–125
15–100
15–70
—
15–100
15–125
3-Pole
15–100
15–100
15–100
100–225
15–100
15-125
120/240
120/240
120/240
—
277
347
3-Pole
240
240
240
480/277
600/347
120V
10,000
22,000
65,000
240V
10,000
22,000
480V
—
600/347V
Page
Poles
Amperes, Continuous
1-Pole
Volts (50/60 Hertz)
2-Pole
AC
Ratings
UL Interrupting Rating —
Symmetrical RMS Amperes
DC
—
—
—
—
240
240
240
65,000
—
—
—
—
65,000
65,000
10,000
22,000
42,000
100,000
65,000
65,000
—
—
—
—
—
—
14,000햴
25,000
240
—
—
—
—
—
—
10,000햳
14,000
—
—
—
—
—
—
—
125/250
125/250
Interrupting Rating — DC Amperes
—
—
—
—
—
—
—
14,000
14,000
3.75
3.75
4.00
—
—
—
—
4.50
—
Height
Width
55–125A
4.00
4.00
4.00
—
—
—
—
4.50
—
60–225A
—
—
—
7.00
7.00
7.00
7.00
—
—
1-Pole
1.00
1.00
1.00
—
—
—
—
1.00
1.00
2-Pole
2.00
2.00
2.00
3.00
3.00
3.00
—
2.00
2.00
3-Pole
3.00
3.00
3.00
4.50
4.50
4.50
4.50
3.00
3.00
Depth
2.37
2.37
2.37
2.34
2.34
2.53
2.53
2.87
2.90
Thermal and Fixed Magnetic Trip
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Molded Case Switch
⻫
—
—
⻫
—
—
—
—
—
—
—
—
—
—
—
—
⻫
—
Shunt Trip
⻫
⻫
⻫
⻫햲
⻫햲
⻫햲
⻫햲
⻫
⻫
Auxiliary Switch
⻫
⻫
⻫
⻫햲
⻫햲
⻫햲
⻫햲
⻫
⻫
Alarm Switch
—
—
—
⻫
⻫
—
—
⻫
⻫
Mechanical Interlock
—
—
—
⻫
⻫
⻫
⻫
—
—
Fungus Proofing (ref. page 6-84)
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Type 1 — Indoor Surface
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
Type 1 — Indoor, Flush
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
Type 3R — Outdoor-Rainproof
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
BQ, BQH, HBQ
QJ2, QJH2, QJ2-H
CQD
MOLDED CASE
CIRCUIT BREAKERS
Undervoltage Trip
6
Individual
Enclosures
60–225
—
Dimensions in
inches
Accessories &
Modifications
60–225
Volts — 2-Pole
15–50A
Overcurrent
Devices
60–225
NGG
NGG
For inches / millimeters conversion, see Application Data section.
햲 3-pole
햳 Type
햴 CQD
breakers only (factory installed only).
CQD6—CSA only.
breakers are rated 14,000 KAIC at 480/277V.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-9
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
General Purpose Breakers
Page
Poles
Amperes, Continuous
Volts 50/60HZ
AC
Ratings
UL
Interrupt Rating
Symmetrical RMS
Amperes
220/240V
IEC 947-2
380/415V
50/60HZ
500V
DC
MOLDED CASE
CIRCUIT BREAKERS
6
Dimensions in
inches
Overcurrent
Devices
Accessories &
Modifications
Individual
Enclosures
1-Pole
2-Pole
3-Pole
120V
240V
277V
347V
480V
600V
Icu
Ics
Icu
Ics
Icu
Ics
2-Pole, 250V DC Interrupting Ratings
3-Pole, 500V DC Interrupting Ratings
Height
1-Pole
2-Pole
3-Pole
4-Pole
Width
Depth
Thermal and Fixed Magnetic Trip
Thermal and Adjustable Magnetic Trip
Adjustable Magnetic Trip only
Motor Circuit Protector
Molded Case Switch
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connection Studs
Electric Motor Operator
Plug-In Mounting Assembly (3-4 Pole Only)
Fungus Proofing (ref. page 6-84)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
Type 12K — Semi-Dusttight
NEB, NEG
6-24, 6-32
1, 2, 3, 4
15–125
347
HEB, HEG
6-24, 6-32
1, 2, 3, 4
15–125
347
600/347
—
85,000
—
—
35,000
22,000
85,000
42,000
40,000
20,000
—
—
35,000
—
5.5
1.00
2.00
3.00
4.00
3.00
⻫
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
⻫
—
—
—
—
—
—
—
ED2
6-34
1, 2, 3
15–100
120
ED4
6-34
1, 2, 3
15–125
277
ED6
6-34
1, 2, 3
15–125
347
HED4
6-35
1, 2, 3
15–125
277
HHED6
6-35
2, 3
15–125
—
CED6
6-35
2, 3
15–125
—
600/347
240
480
600
480
600
600
—
100,000
—
—
65,000
25,000
100,000
50,000
70,000
35,000
—
—
42,000
—
5.5
1.00
2.00
3.00
4.00
3.00
⻫
—
—
10,000
10,000
—
—
—
—
—
—
—
—
—
—
5,000
—
6.34
1.00
2.00
3.00
—
4.00
⻫
—
—
—
65,000
22,000
—
18,000
—
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
⻫
—
—
—
—
—
—
—
—
—
—
—
30,000
—
6.34
1.00
2.00
3.00
—
4.00
⻫
—
—
—
100,000
—
—
65,000 100,000 100,000 200,000
—
65,000
—
—
30,000
—
—
—
25,000 142,000 65,000 200,000
18,000
—
18,000 100,000
65,000
—
—
200,000
17,000
—
—
—
35,000
—
—
200,000
19,000
—
—
—
18,000
—
—
—
15,000
—
—
—
30,000
30,000
—
30,000
18,000
—
—
50,000
6.34
6.34
6.58
9.26
1.00
1.00
—
—
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
—
—
—
—
4.00
4.00
4.00
4.00
⻫
⻫
⻫
⻫
—
—
—
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
⻫
For inches / millimeters conversion, see Application Data section.
1-pole
only.
25,000 AIR at 277V AC/15-30A: 65,000 AIR at 277V
35-100A:
AC.
For
DC UPS system application.
6-10
Single
pole ED6 (15–30A) 30kA, (35–100A) 18 kA. CSA Only.
pole HED4, 15-30A: 65,000 AIR at 240V AC; single pole
HED4, 35-100A: 25,000 AIR at 240V AC.
NEG and HEG breakers are rated at 600/347V.
Single
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1-pole
NEG breaker is rated 85K @ 240V, 35K @ 277V and
22K @ 347V. 1-pole HEG breaker is rated 100K @ 240V, 65K
@ 277V and 25K @ 347V.
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
Page
Poles
Amperes, Continuous
Volts 50/60HZ
Ratings
Dimensions in
inches
Overcurrent
Devices
JD6-A,
JXD6-A
HJD6-A, HHJD6-A,
HJXD6-A HHJXD6-A CJD6
6-37
2, 3
70–250
6-38
2, 3
70-250
6-38
2, 3
70-250
6-38
2, 3
70–250
6-40
2, 3
200-400
6-40
2, 3
200-400
6-41
2, 3
200-400
6-41
2, 3
200-400
6-41
2, 3
200-400
600
600
600
600
240
600
600
600
600
65,000
35,000
22,000
65,000
33,000
35,000
18,000
20,000
10,000
30,000
18,000
9.50
100,000
65,000
25,000
100,000
50,000
65,000
33,000
42,000
21,000
30,000
25,000
9.50
200,000
100,000
25,000
200,000
100,000
100,000
50,000
65,000
33,000
—
—
14.12
200,000
200,000
100,000
—
—
—
—
—
—
50,000
50,000
14.12
65,000
—
—
—
—
—
—
—
—
30,000
—
11.00
65,000
35,000
25,000
65,000
33,000
40,000
20,000
20,000
15,000
30,000
25,000
11.00
100,000
65,000
35,000
100,000
50,000
65,000
33,000
42,000
21,000
30,000
35,000
11.00
200,000
100,000
50,000
200,000
100,000
100,000
50,000
65,000
33,000
—
—
11.00
200,000
150,000
100,000
—
—
—
—
—
—
50,000
50,000
17.86
4.50
4.50
4.50
4.50
7.50
7.50
7.50
7.50
7.50
4.00
—
⻫
⻫
4.00
—
⻫
—
4.00
—
⻫
—
4.00
—
⻫
⻫
4.00
—
⻫
—
4.00
—
⻫
—
4.00
—
⻫
⻫
4.00
—
⻫
⻫
4.00
—
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
—
—
—
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Type 12K — Semi-Dusttight
⻫
⻫
⻫
⻫
—
⻫
⻫
⻫
—
For inches / millimeters conversion, see Application Data section.
For
DC UPS application.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-11
MOLDED CASE
CIRCUIT BREAKERS
Individual
Enclosures
JXD2-A
6
Accessories &
Modifications
2-Pole
3-Pole
240V
UL
480V
AC
600V
Interrupt Rating
Symmetrical RMS
Icu
220/240V
Amperes
Ics
IEC60947-2
Icu
380/415V
50/60HZ
Ics
Icu
500V
Ics
2-Pole 250V DC Interrupting Ratings
DC
3-Pole, 500V DC Interrupting Ratings
Height
2-Pole
Width
3-Pole
Depth
Thermal and Fixed Magnetic Trip
Thermal and Adjustable Magnetic Trip
Adjustable Magnetic Trip Only
Motor Circuit Protector
Molded Case Switch
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connection Studs
Electric Motor Operator
Plug-In Mounting Assembly
Fungus Proofing (ref. page 6-84)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
General Purpose Breakers
FD6A,
HFD6,
HHFD6,
FXD6A
HFXD6
HHFXD6 CFD6
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
Page
Poles
Amperes, Continuous
Volts 50/60 HZ
UL
AC
Interrupt Rating
Symmetrical RMS
Amperes
Ratings
220/240V
IEC 947-2
380/415V
50/60HZ
500V
DC
MOLDED CASE
CIRCUIT BREAKERS
6
Overcurrent
Devices
Accessories &
Modifications
Individual
Enclosures
2-Pole 250V DC Interrupting Ratings
3-Pole, 500V DC Interrupting Ratings
Height
Width
Depth
Thermal and Adjustable Magnetic Trip
Adjustable Magnetic Trip Only
Motor Circuit Protector
Molded Case Switch
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connection Studs
Electric Motor Operator
Plug-In Mounting Assembly
Fungus Proofing (ref. page 6-84)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
Type 12K — Semi-Dusttight
2-Pole
3-Pole
240V
480V
600V
Icu
Ics
Icu
Ics
Icu
Ics
General Purpose Breakers
LD6,
HLD6,
HHLD6,
LXD6
HLXD6
HHLXD6
6-44
6-45
6-45
2, 3
2, 3
2, 3
250-600 250-600 250-600
CLD6
6-45
2, 3
450-600
LMD6,
LMXD6
6-48
2, 3
500-800
HLMD6,
HLMXD6
6-49
2, 3
500-800
MD6,
MXD6
6-51
2, 3
500-800
HMD6,
HMXD6
6-52
2, 3
500-800
CMD6
6-52
3
400-800
600
600
600
600
600
600
600
600
600
65,000
35,000
25,000
65,000
33,000
40,000
20,000
30,000
15,000
30,000
35,000
11.00
7.50
4.00
100,000
65,000
35,000
100,000
50,000
65,000
33,000
42,000
21,000
30,000
11.00
7.50
4.00
—
200,000
100,000
50, 000
200,000
100,000
100,000
50, 000
65, 000
33, 000
—
—
11.00
7.50
4.00
—
200,000
150,000
100,000
—
—
—
—
—
—
50, 000
50, 000
17.86
7.50
4.00
65,000
50,000
25,000
65,000
33,000
40,000
20,000
30,000
15,000
30,000
25,000
16.00
7.50
4.59
100,000
65,000
50,000
100,000
50,000
65,000
33,000
42,000
21,000
30,000
50,000
16.00
7.50
4.59
65,000
50,000
25,000
65,000
33,000
40,000
20,000
30,000
15,000
30,000
25,000
16.00
9.00
6.19
100,000
65,000
50,000
00,000
50,000
65,000
33,000
42,000
21,000
30,000
50,000
16.00
9.00
6.19
—
200,000
100,0001
65,0001
200,000
100,000
100,000
50,000
65,0001
33,000
30,0001
50,000
16.00
9.00
6.19
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
For inches / millimeters conversion, see Application Data section.
For
DC UPS application.
6-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Thermal-Magnetic Trip Breakers
Page
Poles
Amperes, Continuous
Volts 50/60 HZ
UL
Ratings
AC
Interrupt Rating
Symmetrical RMS
Amperes
220/240V
IEC 947-2
380/415V
50/60HZ
500V
DC
Dimensions in
inches
Overcurrent
Devices
Accessories &
Modifications
2-Pole 250V DC Interrupting Ratings
3-Pole, 500V DC Interrupting Ratings
Height
Width
Depth
Circuit breakers require Connect-all
mounting block. Dimensions shown
are for circuit breaker only.
HPD6,
HPXD6
6-59
3
1200-1600
600
100,000
65,000
50,000
100,000
50,000
65,000
17,000
42,000
21,000
30,000
50,000
16.00
9.00
6.19
⻫
—
CPD6
6-59
3
1200-1600
600
200,000
100,000
65,000
200,000
100,000
100,000
25,000
65,000
17,000
30,000
50,000
16.00
9.00
6.19
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
—
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
—
—
—
—
—
—
Type 12K — Semi-Dusttight
⻫
⻫
⻫
—
—
—
MOLDED CASE
CIRCUIT BREAKERS
Thermal and Adjustable Magnetic Trip
Adjustable Magnetic Trip Only
Motor Circuit Protector
Molded Case Switch
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connections Studs
Electric Motor Operator
Plug-in Mounting Assembly
Fungus Proofing (ref. page 6-84)
Mounting Block (required)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
PD6,
PXD6
6-59
3
1200-1600
600
65,000
50,000
25,000
65,000
33,000
40,000
10,000
30,000
8,000
30,000
25,000
16.0
9.00
6.19
⻫
—
6
Individual
Enclosures
3-Pole
240V
480V
600V
Icu
Ics
Icu
Ics
Icu
Ics
General Purpose Breakers
ND6,
HND6,
NXD6
HNXD6
CND6
6-55
6-56
6-56
2, 3
2, 3
3
800-1200 800-1200
800-1200
600
600
600
65,000
100,000
200,000
50,000
65,000
100,000
25,000
50,000
65,000
65,000
100,000
200,000
50,000
100,000
33,0001
40,0001
65,000
100,000
20,00011
33,000
50,000
30,000
42,000
65,000
15,0001
21,000
33,000
30,000
30,000
30,0001
25,00011
50,000
50,000
16.00
16.00
16.00
9.00
9.00
9.00
6.191
6.19
6.19
⻫
⻫
⻫
—
—
—
For inches / millimeters conversion, see Application Data section.
For
DC UPS application.
design.
3-pole design.
2-pole
Requires
Connect-all mounting assembly. Dimensions
shown are for circuit breaker only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-13
Molded Case Circuit Breakers
Reference Guide
Thermal-Magnetic Trip Breakers
& Electronic Trip Breakers
Page
Poles
Amperes, Continuous
Volts 50/60 HZ
Ratings
Dimensions in
inches
Accessories &
Modifications
MOLDED CASE
CIRCUIT BREAKERS
6
Overcurrent
Devices
Individual
Enclosures
3-Pole
240V
UL
480V
600V
AC
Interrupt Rating
Icu
220/240V
Symmetrical RMS
Ics
Amperes
IEC60947-2
Icu
380/415V
50/60HZ
Ics
Icu
500V
Ics
2-Pole 250V DC Interrupting Ratings
DC
3-Pole, 500V DC Interrupting Ratings
Height
Width
3-Pole
Depth
Solid State Trip
Thermal and Adjustable Magnetic Trip
Adjustable Magnetic Trip Only
Motor Circuit Protector
Molded Case Switch
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connections Studs
Electric Motor Operator
Plug-In Mounting Assembly
Fungus Proofing (ref. page 6-84)
Mounting Block (required)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
Selection
General Purpose
Breakers
HRD6,
RD6,
RXD6
HRXD6
6-62
6-62
3
3
1600-2000 1600-2000
600
600
65,000
100,000
50,000
65,000
25,000
50,000
65,000
100,000
33,000
50,000
40,000
65,000
10,000
17,000
30,000
42,000
8,000
21,000
30,000
30,000
25,000
50,000
16.00
16.00
9.00
9.00
6.19
6.19
—
—
⻫
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
—
—
—
Solid State Trip Circuit Breakers
SJD6
6-42
3
200-400
600
65,000
35,000
25,000
SHJD6
6-42
3
200-400
600
100,000
65,000
35,000
SCJD6
6-42
3
200-400
600
200,000
150,000
100,000
SLD6
6-46
3
300-600
600
65,000
35,000
25,000
SHLD6
6-46
3
300-600
600
100,000
65,000
35,000
SCLD6
6-46
3
300-600
600
200,000
150,000
100,000
11.00
7.50
4.00
⻫
—
—
11.00
7.50
4.00
⻫
—
—
17.86
7.50
4.00
⻫
—
—
11.0
7.50
4.00
⻫
—
—
11.00
7.50
4.00
⻫
—
—
17.86
7.50
4.00
⻫
—
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
⻫
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
—
—
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
—
—
⻫
⻫
⻫
⻫
⻫
⻫
Type 12K — Semi-Dusttight
—
—
⻫
⻫
⻫
⻫
⻫
⻫
For inches / millimeters conversion, see Application Data section.
Requires
Connect-all mounting assembly. Dimensions
shown are for circuit breaker only.
6-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Reference Guide
Selection
Electronic Trip Breakers
Solid State Trip Circuit Breakers
SMD6
Page
Ratings
AC Interrupt
Rating
Symmetrical
RMS
Amperes
Dimensions in
inches
Height
Width
Depth
Overcurrent
Devices
Solid State Trip
Accessories &
Modifications
SHTD6
6-53
3
600800
600
200,000
100,000
65,000
—
—
—
—
16.00
9.00
6.19
6-57
3
8001200
600
65,000
50,000
25,000
—
—
—
—
16.00
9.00
6.19
6-57
3
8001200
600
100,000
65,000
50,000
—
—
—
—
16.00
9.00
6.19
6-57
3
8001200
600
200,000
100,000
65,000
—
—
—
—
16.00
9.00
6.19
6-60
3
12001600
600
65,000
50,000
25,000
—
—
—
—
16.00
9.00
6.19
6-60
3
12001600
600
100,000
65,000
50,000
—
—
—
—
16.00
9.00
6.19
6-64
3
20003200
600
85,000
65,000
50,000
—
—
—
—
27.5
14.12
11.38
6-64
3
20003200
600
150,000
100,000
85,000
—
—
—
—
27.5
14.12
11.38
6-64
3
20003200
600
200,000
150,000
100,000
—
—
—
—
27.5
14.12
11.38
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
—
⻫
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
—
—
—
—
⻫
⻫
⻫
⻫
⻫
—
⻫
—
⻫
⻫
—
—
—
—
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
—
—
—
—
—
⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
—
—
—
—
—
⻫ ⻫
⻫
⻫
⻫
⻫
⻫
—
—
⻫
—
—
—
—
—
Type 5, 12 — Lint, Fine Dust, Oils, Coolants
⻫
⻫
⻫
⻫
⻫
⻫
—
—
—
—
—
Type 12K — Semi-Dusttight
⻫
⻫
⻫
⻫
⻫
⻫
—
—
—
—
—
For inches / millimeters conversion, see Application Data section.
Requires
connect-all mounting block assembly. Dimensions
shown are for circuit breaker.
Breaker
has rating plugs which can be changed within each
frame rating.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-15
MOLDED CASE
CIRCUIT BREAKERS
6-53
3
600800
600
100,000
65,000
50,000
—
—
—
—
16.00
9.00
6.19
SHHTD6
6
Individual
Enclosures
Undervoltage Trip
Shunt Trip
Auxiliary Switch
Alarm Switch
Mechanical Interlock
Rear Connection Studs
Electric Motor Operator
Plug-In Mounting Assembly
Fungus Proofing (ref. page 6-84)
Type 1 — Indoor Surface
Type 1 — Indoor, Flush
Type 3R — Outdoor-Rainproof
Type 7 — Flammable Gas Atmosphere
Type 9 — Combustion Dusttight
STD6
SPD6
6-53
3
600800
3-Pole 600
240V 65,000
UL
480V 50,000
600V 25,000
Icu
—
380/415V
Ics
—
IEC60947-2
50/60HZ
Icu
—
690V
Ics
—
10.00
9.00
6.19
SHPD6
SHND6 SCND6
Poles
Amperes, Continuous
Volts 50/60HZ
SHMD6 SCMD6 SND6
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Page
Breaker Frame Family
Continuous Amps
Poles
Max. Volts AC
Breaker Type
Interrupting Class
Interrupting
Rating RMS
Symmetrical
Amperes
AC 50/60Hz
Ratings
DC
Interrupting
Ratings (UL) 햳
Dimensions
in Inches
MOLDED CASE
CIRCUIT BREAKERS
6
Trip Unit
Information
Specific
Application
Breakers
Accessories &
Modifications
EnclosuresA
UL
lCS/lCU
240Vac
480Vac
600Vac
220/240Vac
380/415Vac
690Vac
250Vdc (2-Pole)
500Vdc (3-Pole)
600Vdc (3-Pole)
750Vdc (4-Pole)
1-Pole
2-Pole
3-Pole
4-Pole
Thermal-Magnetic
Electronic
Electronic with LCD
Interchangeable Trip Unit
Reverse Feed (w/Non-Interchangeable Trip)
Communications Capability*
Molded Case Switch
Motor Circuit Protector
100% Rated
50°C CalibratedA
Auxiliary Switch
Alarm Switch
Shunt Trip
Undervoltage Release
Mechanical Interlocks
Electric Motor or Stored Energy Operator
Rear Connecting Studs
Plug-In Mounting Assy. w/Trip Interlock
Draw-Out Assembly
Handle Mechanism Options
Fungus Proofing
NEMA 1 – Indoor, Surface Mount
NEMA 1 – Indoor, Flush Mount
NEMA 3R – Outdoor, Rain Proof
NEMA 4, 4X – Stainless Steel
NEMA 7, 9 – Hazardous Locations
NEMA 12 – Dust
Terminal Shields
Distribution Lugs
Ground Sensor (Neutral Transformer)
6-30
GG
15–125A
1, 2, 3
600Y/347V
NGG
N
65
25
14 (600Y/347)
65/33
25/12.5
—
14
—
—
—
5.1H x 1W x 2.8D
5.1H x 2W x 2.8D
5.1H x 3W x 2.8D
—
◆
◆
6-32
6-96
6-100
6-104
EG
DG
FG
JG
15–125A
30–150A
40–250A
70–400A
1, 2, 3, 4
2, 3, 4
2, 3, 4
2, 3, 4
600Y/347V
600V
600V
600V
NEG HEG
NDG HDG LDG NFG HFG LFG NJG HJG LJG
N
H
N
H
L
N
H
L
N
H
L
85
100
65 100 200 65 100 200 65 100 200
35
65
35
65 100 35
65 100 35
65 100
22
25
18
20
25
18
20
25
25
25
25
85/43 100/50 65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150
40/30 70/35
40/40 70/70 100/75 40/40 70/70 100/75 45/45 70/70 100/75
—
—
12/6 12/6 12/6 12/6 12/6 12/6 12/6 15/8 15/8
35
42
30
30
30
30
30
30
30
30
30
—
—
18
18
18
18
18
30
25
35
35
—
—
#
#
#
#
#
#
#
#
#
—
—
#
#
#
#
#
#
#
#
#
5.5H x 1W x 3D
—
—
5.5H x 2W x 3D
6.9H x 4.1W x 3.4D
11H x 5.5W x 4.2D
5.5H x 3W x 3D
6.9H x 4.1W x 3.4D
11H x 5.5W x 4.2D
5.5H x 4W x 3D
6.9H x 5.5W x 3.4D
11H x 7.2W x 4.2D
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
햲
500Vdc nominal, 600Vdc max. for ungrounded DC UPS systems.
DC Interrupting Ratings are not applicable to electronic circuit breakers.
* - Communications available via a COM 10 module using Profibus protocol.
# - Consult Siemens for these applications.
GG and EG are not VL family breakers and do not share common VL accessories.
A - Consult Siemens for availability.
햳
6-16
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Molded Case Circuit Breakers
Reference Guide
Selection/Application
Page
Breaker Frame Family
Continuous Amps
Poles
Max. Volts AC
Breaker Type
Interrupting Class
Ratings
Interrupting
Rating RMS
Symmetrical
Amperes
AC 50/60Hz
DC
Interrupting
Ratings (UL) 햴
Dimensions
in Inches
Trip Unit
Information
EnclosuresA
1-Pole
2-Pole
3-Pole
4-Pole
Thermal-Magnetic
Electronic
Electronic with LCD
Interchangeable Trip Unit
Reverse Feed (w/Non-Interchangeable Trip)
Communications Capability 햲
Molded Case Switch
Motor Circuit Protector
100% Rated
50°C CalibratedA
Auxiliary Switch
Alarm Switch
Shunt Trip
Undervoltage Release
Mechanical Interlocks
Electric Motor or Stored Energy Operator
Rear Connecting Studs
Plug-In Mounting Assy. w/Trip Interlock
Draw-Out Assembly
Handle Mechanism Options
Fungus Proofing
NEMA 1 – Indoor, Surface Mount
NEMA 1 – Indoor, Flush Mount
NEMA 3R – Outdoor, Rain Proof
NEMA 4, 4X – Stainless Steel
NEMA 7, 9 – Hazardous Locations
NEMA 12 – Lint, Fine Dust, Oils, Coolant
Terminal Shields
Distribution Lugs
Ground Sensor (Neutral Transformer)
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
MOLDED CASE
CIRCUIT BREAKERS
Accessories &
Modifications
lCS/lCU
240Vac
480Vac
600Vac
220/240Vac
380/415Vac
690Vac
250Vdc (2-Pole)
500Vdc (3-Pole)
600Vdc (3-Pole)
750Vdc (4-Pole)
6
Specific
Application
Breakers
UL
6-108
6-112
6-116
6-120
LG
MG
NG
PG
150–600A
200–800A
300–1200A
400–1600A
2, 3
2, 3, 4
2, 3, 4
3, 4
600V
600V
600V
600V
NLG HLG LLG NMG HMG LMG NNG HNG LNG NPG HPG LPG
N
H
L
N
H
L
N
H
L
N
H
L
65 100 200 65 100 200 65 100 200 65 100 200
35
65 100 35
65 100 35
65 100 35
65 100
25
25
25
25
35
50
25
35
65
25
35
65
65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150
45/45 70/70 100/75 50/50 70/70 100/75 50/25 70/35 100/50 50/25 70/35 100/50
12/6 15/8 15/8 20/10 30/15 35/17 20/10 30/15 35/15 20/10 30/15 35/15
30
30
30
22
25
42
22
25
42
22
25
42
25
35
35
35
50
65
35
50
65
35
50
65
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
—
—
—
11H x 5.5W x 4.2D 16H x 7.5W x 4.7D 16H x 9W x 6.2D
—
11H x 5.5W x 4.2D 16H x 7.5W x 4.7D
16H x 9W x 6.2D
—
16H x 10W x 4.7D
16H x 12W x 6.2D
◆
◆
햲
Communications available via COMPRO or COMMOD modules using Profibus or Modbus protocol.
500Vdc nominal, 600Vdc max. for ungrounded DC UPS systems.
DC Interrupting Ratings are not applicable to electronic circuit breakers.
# - Consult Siemens for these applications.
A - Consult Siemens for availability.
햳
햴
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-17
Molded Case Circuit Breakers
Panelboard Mounting with INSTA-WIRE
Selection
1-Pole Bolt-On (120V AC)햲햶
Continuous
Current Rating
@ 40° C
10
15
20
25
30
35
40
45
50
60
70
Type BL
Type BLH
Type HBL
10,000A IR
22,000A IR
65,000A IR
Catalog
Number
B110
B115햵
B120햵
B125
B130
B135
B140
B145■
B150
B160
B170
Catalog
Number
—
B115H햵
B120H햵
B125H
B130H
B135H■
B140H
B145H■
B150H
B160H■
B170H■
List
Price $
—
69.00
69.00
77.00
77.00
77.00
77.00
77.00
77.00
77.00
98.00
Catalog
Number
—
B115HH햵
B120HH햵
B125HH■
B130HH
B135HH■
B140HH
B145HH■
B150HH■
B160HH■
B170HH■
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
156.00
212.00
212.00
212.00
427.00
452.00
AC)햲햴햷
—
B215H
B220H
B225H■
B230H
B235H■
B240H
B245H■
B250H
B260H
B270H■
B280H■
B290H■
B2100H
B2110H■
B2125H
—
156.00
156.00
156.00
156.00
156.00
156.00
156.00
156.00
156.00
240.00
342.00
342.00
342.00
861.00
905.00
—
B215HH
B220HH
B225HH■
B230HH
B235HH■
B240HH
B245HH■
B250HH
B260HH
B270HH■
B280HH■
B290HH■
B2100HH
B2100HH■
B2125HH■
212.00
212.00
212.00
212.00
212.00
212.00
281.00
321.00
321.00
321.00
AC)햲햸
—
—
—
—
—
—
—
—
—
—
2-Pole Bolt-On (Common-Trip 120/240V
10
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
B210
B215
B220
B225
B230
B235
B240
B245
B250
B260
B270
B280
B290
B2100
B2110■
B2125
MOLDED CASE
CIRCUIT BREAKERS
6
2-Pole Bolt-On (Common-Trip 240V
15
20
30
40
50
60
70
80
90
100
B215R
B220R
B230R
B240R■
B250R
B260R
B270R■
B280R■
B290R■
B2100R■
3-Pole Bolt-On (Common-Trip 240V
10
15
20
25
30
35
40
45
50
60
70
80
90
100
B310
B315
B320
B325
B330
B335
P340
B345
B350
B360
B370
B380
B390
B3100
List
Price $
35.00
35.00
35.00
35.00
35.00
35.00
35.00
35.00
35.00
35.00
76.00
AC )햲햷
266.00
266.00
266.00
266.00
266.00
266.00
266.00
266.00
266.00
266.00
327.00
369.00
369.00
369.00
—
B315H
B320H
B325H
B330H
B335H■
B340H
B345H■
B350H
B360H
B370H
B380H■
B390H■
B3100H
—
—
—
—
—
—
—
—
—
—
Description
120V Shunt Trip
24V Shunt Trip
120V Auxiliary Switch
1-Pole Padlocking Device
2-Pole Padlocking Device
3-Pole Padlocking Device
Handle Block
Catalog Number
add suffix...00S01■
add suffix...00S07■
add suffix...01■ 햳
ECPLD1
ECPLD2
ECQLD3 (bag of 10 pcs.)
ECHBD1
■ Built to order. Allow 2-3 weeks for delivery
햲 UL
Listed for use with 60/75° wire through 125 amps,
HACR rated. 120V AC Fluorescent Lighting.
햳 1A and 1B contacts.
6-18
—
—
—
—
—
—
—
—
—
—
—
400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
486.00
570.00
570.00
570.00
MP-T / MP-HT / MP-MT Accessories
List
Price $
—
119.00
119.00
119.00
119.00
119.00
139.00
139.00
139.00
162.00
162.00
1-Pole
—
290.00
290.00
290.00
290.00
355.00
355.00
355.00
355.00
355.00
581.00
655.00
655.00
655.00
655.00
2167.00
2-Pole
3-Pole
—
—
—
—
—
—
—
—
—
—
—
B315HH
B320HH
B325HH■
B330HH
B335HH■
B340HH
B345HH■
B350HH
B360HH
B370HH
B380HH
B390HH
B3100HH
—
503.00
503.00
503.00
503.00
503.00
613.00
613.00
613.00
613.00
655.00
771.00
771.00
771.00
Breaker
Type
BL, BLH
BL, BLH
HBL
Dimensions
Amperes L
15–50
39⁄16
55–125 33⁄4
15–125 33⁄4
D1
23⁄8
23⁄8
23⁄8
D2
3
3
3
Modifications
Field/Factory Installed List Price $
Factory
141.00(adder)
Factory
141.00(adder)
Factory
83.00(adder)
Field
10.10
Field
10.20
Field
98.00
Field
9.10
Description
400Hz Calibration
415V 50Hz Calibration
Marine 50˚C Ambient
Calibration
Fungus Proofing
햴 UL
Listed for use on 3-phase grounded “B” systems —
10,000 for this application.
applications (SWD).
햵 UL Listed for frequent switching
햶 Shipped 12 per sleeve.
햷 Shipped 6 per sleeve.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Number
add suffix...Y햹
add suffix...E햺햻
List Price $
8.00 (adder)
No adder
add suffix...M
No adder
add suffix...F
10.50 (adder per pole)
햸 Shipped 4 per sleeve.
햹 UL Listed 5KA IR.
햺 Not UL Listed.
햻 1 & 2 Poles only.
햽 Contact factory for availability
Discount Schedule MCCB
Molded Case Circuit Breakers
Panelboard Mounting Circuit Breakers
Selection
▪ UL Listed and CSA Certified
▪ HACR Rated
▪ Standard 1 inch per pole format with bolt-on design
Ground-Fault Circuit Interrupters (Class A - 5mA)햳
Ground-fault circuit interrupters (GFCI) provide Class A ground fault protection. A GFCI
is a device intended for personnel protection and will de-energize the circuit when a
fault current to ground is 6 milliamperes or more.
10,000 A IR
Breaker
Type
BLF/BLHF
1-Pole
120V AC
Bolt-On
BLF/BLHF
2-Pole
120/240V AC
Bolt-On
22,000 A IR
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
15
20
25
30
BF115 햲
BF120 햲
BF125 ■
BF130
344.00
344.00
344.00
344.00
BF115H햲
BF120H햲■
BF125H■
BF130H
683.00
683.00
683.00
683.00
15
20
30
40
50
60
BF215
BF220
BF230
BF240
BF250
BF260
410.00
410.00
410.00
410.00
410.00
410.00
BF215H
BF220H
BF230H
BF240H
BF250H
BF260H
743.00
743.00
743.00
743.00
743.00
743.00
1-Pole GFCI
2-Pole GFCI
Ground Fault Equipment Protection (30mA)햳
Ground fault circuit breakers provide protection of equipment from damaging
line-to-ground fault currents by de-energizing the circuit for all ungrounded conductors
of the faulted circuit.
BLE/BLEH
BE115 햲
BE120 햲
BE130
418.00
418.00
418.00
BE115H햲
BE120H햲
BE130H
683.00
683.00
683.00
15
20
30
40
50
60
BE215
BE220
BE230
BE240
BE250
BE260 ■
549.00
549.00
549.00
549.00
549.00
549.00
BE215H
BE220H
BE230H
BE240H
BE250H
BE260H■
995.00
995.00
995.00
995.00
995.00
995.00
1-Pole Equipment
Protection
2-Pole Equipment
Protection
MOLDED CASE
CIRCUIT BREAKERS
BLE/BLEH
2-Pole
120/240V AC
Bolt-On
15
20
30
6
1-Pole
120V AC
Bolt-On
Arc-Fault Circuit Interrupters (AFCI)햳
Arc-fault circuit interrupters (AFCI) detect arcing faults (an unintentional arcing condition
in a circuit) that standard circuit breakers are unable to detect. An AFCI is a branch
feeder device intended to mitigate the effects of arc-faults by de-energizing the circuit
when an arc-fault is detected.
BAF/BAFH
15
B115AF햲
361.00
B115AFH■햲
717.00
1-Pole 120V AC
20
B120AF햲
361.00
B120AFH■햲
717.00
BAF/BAFH
15
B215AF
454.00
B215AFH■
820.00
20
B220AF
454.00
B220AFH■
820.00
2-Pole 120/240V AC
Description
Catalog Number
1-Pole Padlock (on/off)
ECPLD1
10.10
2-Pole Padlock (on/off)
ECPLD2
10.20
Handle Block
ECBX231M
햲 UL
Listed as SWD (Switching Duty) Rated, suitable for
120V AC Fluorescent Lighting.
Discount Schedule MCCB
2-Pole AFCI
Wiring Diagrams
QAF/QPF/QE Accessories
■ Built to order. Allow 2–3 weeks for delivery.
1-Pole AFCI
List Price $
9.70
햳
White line neutral (pigtail) must be connected to the
panel neutral for the device to function.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-19
Molded Case Circuit Breakers
Special Application Panelboard Mounting Breakers
Switching Neutrals 햲
15
BG
Selection
2-Wire
Common Trip
20
30
BG215 ■
BG220 ■
BG230 ■
123.00
123.00
123.00
10
10
10
—
—
—
—
—
—
BG
15
20
30
BG315 ■
BG320 ■
BG330 ■
186.00
186.00
186.00
—
—
—
10
10
10
—
—
—
3-Wire
Common Trip
HID Lighting 햲
For high-intensity discharge lamp loads having in-rush currents above the
instantaneous trip setting of a standard breaker.
BL
15
20
30
B115HID 햳■
B120HID 햳
B130HID ■
45.00
45.00
45.00
10
10
10
—
—
—
—
—
—
BL
15
20
30
B215HID 햳■
B220HID 햳
B230HID ■
96.00
96.00
96.00
—
—
—
10
10
10
—
—
—
1-Pole
2-Pole
Switching Neutrals
Tungsten Lighting
For high wattage, tungsten-lamp loads in-rush currents above the instantaneous
trip setting of a standard breaker.
BL
1-Pole
15
20
B115T 햳
B120T 햳
62.00
62.00
10
10
—
—
—
—
—
—
—
—
Molded Case Switch
6
For applications that do not require overcurrent protection.
BL
30
60
B230S
B260S
68.00
80.00
—
—
MOLDED CASE
CIRCUIT BREAKERS
2-Pole
■ Built to order. Allow 2–3 weeks for delivery.
햲
햳
HACR rated.
UL Listed for frequent switching applications (SWD). 120V AC fluorescent lighting.
6-20
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
BQD 100A Frame Panelboard Mounting Circuit Breakers
BQD
Selection/Dimensions
2-Pole
480Y/277V AC–
125/250V DC
1-Pole
277V AC–125V DC
Continuous
Current Rating
@ 40°C
15
20
25
30
35
40
45
50
60
70
80
90
100
Catalog
Number
BQD115
BQD120
BQD125
BQD130
BQD135
BQD140
BQD145 ■
BQD150
BQD160
BQD170■
BQD180■
BQD190■
BQD1100■
List
Price
$
128.00
128.00
128.00
128.00
128.00
128.00
128.00
128.00
128.00
247.00
247.00
247.00
247.00
Catalog
Number
BQD215
BQD220
BQD225
BQD230
BQD235
BQD240
BQD245
BQD250
BQD260
BQD270
BQD280
BQD290
BQD2100
3-Pole
480Y/277V AC
List
Price
$
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
588.00
588.00
588.00
588.00
Catalog
Number
BQD315
BQD320
BQD325
BQD330
BQD335
BQD340
BQD345
BQD350
BQD360
BQD370
BQD380
BQD390
BQD3100
List
Price
$
513.00
513.00
513.00
513.00
513.00
513.00
513.00
513.00
513.00
699.00
699.00
699.00
699.00
BQD, BQD6
BQD6 CSA Certified
2-Pole
600/347V AC
1-Pole
347V AC
List
Price
$
128.00
128.00
128.00
128.00
128.00
128.00
128.00
128.00
128.00
247.00
Catalog
Number
BQD6115
BQD6120
BQD6125■
BQD6130
BQD6135■
BQD6140■
BQD6145■
BQD6150■
BQD6160■
BQD6170■
Catalog
Number
BQD6215
BQD6220
BQD6225■
BQD6230
BQD6235■
BQD6240■
BQD6245■
BQD6250■
BQD6260■
BQD6270■
List
Price
$
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
588.00
Catalog
Number
BQD6315
BQD6320
BQD6325■
BQD6330
BQD6335■
BQD6340
BQD6345■
BQD6350
BQD6360
BQD6370
List
Price
$
513.00
513.00
513.00
513.00
513.00
513.00
513.00
513.00
513.00
699.00
Interrupting Ratings
BQD
(UL)
BQD6
(CSA)
RMS Symmetrical Amperes (KA)
Volts AC
480/
120
240
277
277
1
2
3
1
2
3
65
—
—
65
—
—
BQD Internal Accessories
Control Voltage
V AC
24
120
240
277
480
600
—
—
—
—
V DC
—
—
—
—
—
—
12
24
48
125
Maximum Voltage
AC
240
240
DC
125
125
Shunt Trip
Catalog
Number
BQDST24▲
BQDST120
BQDST240▲
BQDST277▲
BQDST480▲
BQDST600▲
BQDST12▲
BQDST24▲
BQDST48▲
BQDST125▲
—
65
65
—
65
65
List Price $
636.00
636.00
636.00
636.00
636.00
636.00
636.00
636.00
636.00
636.00
Auxiliary Switch
Catalog
Number
List Price $
BQDA1▲
271.00
BQDA2▲
540.00
For inches / millimeters conversion,
see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
14
—
—
—
—
—
—
14
14
—
—
—
Shipping Weights
Number of
Poles
Number per
Carton
Shipping
Weight (lbs.) (ea.)
1
2
3
1/12/48
1/6/24
1/4/16
1.6
1.2
2.0
MOLDED CASE
CIRCUIT BREAKERS
Breaker
Type
Number
of
Poles
BQD, BQD6
6
Continuous
Current Rating
@ 40°C
15
20
25
30
35
40
45
50
60
70
3-Pole
600/347V AC
Lugs For 60/70°C Wire
Volts DC
347
600/
347
125
125/
250
—
—
—
10
—
—
—
—
—
—
10
10
14
—
—
14
—
—
—
14
—
—
14
—
BQD – Load End Only
15–40
#14–#6 AWG Cu
#12–#6 AWG Al
45–100
#8–#1 AWG Cu
#6–#1/0 AWG Al
Shunt Trip and Auxiliary Switch Combinations
Catalog
Number
List Price $
BQDST24AAS▲
897.00
897.00
BQDST120AAS▲
BQDST240AAS▲
897.00
BQDST277AAS▲
897.00
BQDST480AAS▲
897.00
BQDST600AAS▲
897.00
BQDST12DAS▲
897.00
BQDST24DAS▲
897.00
BQDST48DAS▲
897.00
BQDST125DAS▲
897.00
Alarm Switch
Catalog
Number
BQDBA▲
—
Alarm and Auxiliary Switch Combination
List Price $
271.00
—
Catalog
Number
List Price $
BQDA1BA
540.00
SWD
HID
HID
Accessory
rated for switching fluorescent lighting.
rated at 277V AC.
Not suitable for 3-phase delta 480V applications.
HACR rated.
rated at 480Y/277V AC.
adds one pole space.
Accessories pages 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-21
Molded Case Circuit Breakers
NGB Frame
Selection
Type NGB (Panelboard Mount)
1-Pole
Continuous
Current Rating
@ 40°C
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
2-Pole
Catalog
Number
NGB1B015B 햲 햳
NGB1B020B 햲 햳
NGB1B025B 햳
NGB1B030B 햳
NGB1B035B 햳
NGB1B040B 햳
NGB1B045B 햳
NGB1B050B 햳
NGB1B060B
NGB1B070B
NGB1B080B
NGB1B090B
NGB1B100B
NGB1B110B
NGB1B125B
List
Price
$
153.00
153.00
153.00
153.00
153.00
153.00
153.00
153.00
153.00
257.00
257.00
257.00
257.00
520.00
520.00
Catalog
Number
NGB2B015B 햳
NGB2B020B 햳
NGB2B025B 햳
NGB2B030B 햳
NGB2B035B 햳
NGB2B040B 햳
NGB2B045B 햳
NGB2B050B 햳
NGB2B060B
NGB2B070B
NGB2B080B
NGB2B090B
NGB2B100B
NGB2B110B
NGB2B125B
3-Pole
List
Price
$
479.00
479.00
479.00
479.00
479.00
479.00
479.00
479.00
479.00
635.00
635.00
635.00
635.00
1272.00
1272.00
Catalog
Number
NGB3B015B 햳
NGB3B020B 햳
NGB3B025B 햳
NGB3B030B 햳
NGB3B035B 햳
NGB3B040B 햳
NGB3B045B 햳
NGB3B050B 햳
NGB3B060B
NGB3B070B
NGB3B080B
NGB3B090B
NGB3B100B
NGB3B110B
NGB3B125B
List
Price
$
627.00
627.00
627.00
627.00
627.00
627.00
627.00
627.00
627.00
738.00
738.00
738.00
738.00
1613.00
1613.00
NGB
Load lugs are included as standard.
HACR rated.
MOLDED CASE
CIRCUIT BREAKERS
6
Shipping Weights
Lugs For 60/75°C Wire
Number of
Poles
Number per
Carton
Shipping
Weight lbs. (kg)
1
2
3
1
1
1
0.9 (0.4)
1.9 (0.9)
2.9 (1.2)
NGB
Ampere Rating
Wire Size
Catalog Number
15–30A
#14–#6 AWG Cu
#12–#6 AWG Al
Integral with breaker
35–125A
#8-#1/0 AWG Cu
#8-#2/0 AWG Al
Integral with breaker
List Price $
Interrupting Ratings (max. RMS symmetrical amperes kA)
Breaker
Type
NGB
Number
of
Poles
1
2, 3
UL489
Volts AC
120
100
—
240
—
100
277
25
—
347
14
—
480Y/277
—
25
600Y/347
—
14
Volts DC
125
14
—
125/250
—
14햴
IEC 60947-2 (lcs = 50% lcu)
Volts AC
Volts DC
240
415
125/250
25
—
—
65
25
14
40°C, 50/60Hz.
햲 SWD
햳 HID
rated.
rated.
only.
햴 2-pole
6-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Accessories for CQD 100A Frame, NGG and NGB 125A Frame햲
Selection
Shunt Trip
Control Voltage
V AC
V DC
CQD, CQD6, NGG, NGB
Catalog Number
List
Price $
120
240
277
480
600
—
—
—
—
—
CQDST120
CQDST240▲
CQDST277▲
CQDST480▲
CQDST600
636.00
636.00
636.00
636.00
636.00
—
—
—
—
012
024
048
125
CQDST12
CQDST24
CQDST48
CQDST125
636.00
636.00
636.00
636.00
Auxiliary Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
CQD, CQD6,
NGG, NGB
Catalog Number
List Price $
CQDA1
CQDA2
271.00
540.00
CQD with Accessory Installed
Alarm Switch
Maximum
Voltage
AC
DC
CQD, CQD6,
NGG, NGB
Catalog Number
240
125
CQDBA
List Price $
271.00
Shunt Trip and Auxiliary Switch
Combinations
Shunt Trip
Voltage
CQDST24AAS▲
897.00
120
CQDST120AAS▲
897.00
240
CQDST240AAS▲
897.00
277
CQDST277AAS▲
897.00
480
CQDST480AAS▲
897.00
600
CQDST600AAS▲
897.00
12
CQDST12DAS▲
897.00
24
CQDST24DAS▲
897.00
48
CQDST48DAS▲
897.00
125
CQDST125DAS▲
897.00
DC
MOLDED CASE
CIRCUIT BREAKERS
List Price $
24
AC
6
CQD, CQD6,
NGG, NGB
Catalog Number
Alarm and Auxiliary Switch
Combinations
For Breaker
Catalog Number
List Price
CQD, CQD6, NGG, NGB
CQDA1BA▲
540.00
▲ Built to order. Allow 6–8 weeks for delivery.
햲 Adds
1-pole space for accessory.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-23
Molded Case Circuit Breakers
NEB & HEB Frame
Selection
Type NEB (Panelboard Mount)
1-Pole
Continuous
Current Rating
@ 40°C
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
2-Pole
Catalog
Number
NEB1B015B 햲 햳
NEB1B020B 햲 햳
NEB1B025B 햳
NEB1B030B 햳
NEB1B035B 햳
NEB1B040B 햳
NEB1B045B 햳
NEB1B050B 햳
NEB1B060B
NEB1B070B
NEB1B080B
NEB1B090B
NEB1B100B
NEB1B110B
NEB1B125B
List
Price
$
282.00
282.00
282.00
282.00
282.00
282.00
282.00
282.00
282.00
321.00
321.00
321.00
321.00
710.00
710.00
Catalog
Number
NEB2B015B 햳
NEB2B020B 햳
NEB2B025B 햳
NEB2B030B 햳
NEB2B035B 햳
NEB2B040B 햳
NEB2B045B 햳
NEB2B050B 햳
NEB2B060B
NEB2B070B
NEB2B080B
NEB2B090B
NEB2B100B
NEB2B110B
NEB2B125B
3-Pole
List
Price
$
707.00
707.00
707.00
707.00
707.00
707.00
707.00
707.00
707.00
803.00
803.00
803.00
803.00
1771.00
1771.00
Catalog
Number
NEB3B015B 햳
NEB3B020B 햳
NEB3B025B 햳
NEB3B030B 햳
NEB3B035B 햳
NEB3B040B 햳
NEB3B045B 햳
NEB3B050B 햳
NEB3B060B
NEB3B070B
NEB3B080B
NEB3B090B
NEB3B100B
NEB3B110B
NEB3B125B
List
Price
$
883.00
883.00
883.00
883.00
883.00
883.00
883.00
883.00
883.00
1004.00
1004.00
1004.00
1004.00
2214.00
2214.00
Front view
Back view
HEB
Type HEB (Panelboard Mount)
MOLDED CASE
CIRCUIT BREAKERS
6
1-Pole
Continuous
Current Rating
@ 40°C
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
2-Pole
Catalog
Number
HEB1B015B 햲 햳
HEB1B020B 햲 햳
HEB1B025B 햳
HEB1B030B 햳
HEB1B035B 햳
HEB1B040B 햳
HEB1B045B 햳
HEB1B050B 햳
HEB1B060B
HEB1B070B
HEB1B080B
HEB1B090B
HEB1B100B
HEB1B110B
HEB1B125B
List
Price
$
394.00
394.00
394.00
394.00
394.00
394.00
394.00
394.00
394.00
467.00
467.00
467.00
467.00
980.00
980.00
Catalog
Number
HEB2B015B 햳
HEB2B020B 햳
HEB2B025B 햳
HEB2B030B 햳
HEB2B035B 햳
HEB2B040B 햳
HEB2B045B 햳
HEB2B050B 햳
HEB2B060B
HEB2B070B
HEB2B080B
HEB2B090B
HEB2B100B
HEB2B110B
HEB2B125B
3-Pole
List
Price
$
918.00
918.00
918.00
918.00
918.00
918.00
918.00
918.00
918.00
1044.00
1044.00
1044.00
1044.00
2030.00
2030.00
Catalog
Number
HEB3B015B 햳
HEB3B020B 햳
HEB3B025B 햳
HEB3B030B 햳
HEB3B035B 햳
HEB3B040B 햳
HEB3B045B 햳
HEB3B050B 햳
HEB3B060B
HEB3B070B
HEB3B080B
HEB3B090B
HEB3B100B
HEB3B110B
HEB3B125B
List
Price
$
1076.00
1076.00
1076.00
1076.00
1076.00
1076.00
1076.00
1076.00
1076.00
1198.00
1198.00
1198.00
1198.00
2433.00
2433.00
Load lugs are included as standard.
HACR rated.
Shipping Weights
Lugs For 60/75°C Wire
Number of
Poles
Number per
Carton
Shipping
Weight lbs. (kg)
1
2
3
1
1
1
1.4 (0.5)
2.4 (0.9)
3.7 (1.4)
NEB/HEB
Ampere Rating
Wire Size
Catalog Number
15–100A
#14–1/0
3TA1EG10
List Price $
12.80
60–125A
#6–2/0
3TA1EG30
12.80
Interrupting Ratings (max. RMS symmetrical amperes kA)
Breaker
Type
NEB
HEB
Number
of
Poles
1
2, 3
UL489/CSA
Volts AC
240
277
85
35
85
—
347
22
—
480
—
35
1
2, 3
100
100
25
—
—
65
65
—
600Y/347
—
22
Volts DC
125/250
35
35
IEC 60947-2
Volts AC
240
85
85
—
25
42
42
100
100
(lcs = 50% lcu)
Volts DC
415
125
—
35
40
—
—
70
42
—
125/250
—
35
—
42
40°C, 50/60Hz.
햲 SWD
햳 HID
rated.
rated.
6-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories for NEG & HEG 125A Frame, NEB & HEB 125A Frame
Selection
Shunt Trip
Control Voltage
V AC
V DC
NEG, HEG, NEB, HEB
Catalog Number
List
Price $
110-240
380-600
24-60
125
—
24-60
STRER240
STREV600
STREM60D
636.00
636.00
636.00
Auxiliary Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
NEG, HEG,
NEB, HEB
Catalog Number
List Price $
ASKE2
ASKE3
271.00
540.00
Alarm Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
NEG, HEG,
NEB, HEB
Catalog Number
List Price $
ASKE1
ASKE5
271.00
540.00
Undervoltage Trip
Control
Voltage
UVREM60▲
636.00
120
UVREN120
636.00
240
UVRER240
636.00
480
UVREU480▲
636.00
600
UVREV600▲
636.00
636.00
DC
12
12
UVREA12AD▲
24
24
UVREB24AD
636.00
48
UVREC48D▲
636.00
125
UVRED125D▲
636.00
250
UVREE250D▲
636.00
MOLDED CASE
CIRCUIT BREAKERS
List Price $
60
AC
6
NEG, HEG,
NEB, HEB
Catalog Number
Alarm and Auxiliary Switch
Combinations
For Breaker
NEG, HEG
Catalog Number
ASKE6
List Price $
540.00
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-25
Circuit Breakers
Lug-In/Lug-Out with INSTA-WIRE
Selection
All BQ/BQH/HBQ circuit breakers are supplied with load side lugs. If line side lugs are required, add suffix “L” to catalog number. Consult Siemens for any
additional charge. All standard circuit breakers are calibrated for 40(insert degree symbol)C maximum ambient application.
1-Pole Plug-In (120V AC)
Continuous
Current Rating
@ 40° C
10
15
20
25
30
35
40
45
50
60
70
Type BQ
Type BQH
Type HBQ
10,000A IR
22,000A IR
65,000A IR
Catalog
Number
BQ1B010
BQ1B015
BQ1B020
BQ1B025
BQ1B030
BQ1B035■
BQ1B040
BQ1B045■
BQ1B050
BQ1B060■
BQ1B070■
List
Price $
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
Catalog
Number
BQ1B010H
BQ1B015H
BQ1B020H
BQ1B025H■
BQ1B030H
BQ1B035H■
BQ1B040H
BQ1B045H■
BQ1B050H
BQ1B060H■
BQ1B070H■
List
Price $
—
66.00
66.00
66.00
74.00
74.00
74.00
74.00
74.00
74.00
92.00
—
BQ2B015H
BQ2B020H
BQ2B025H■
BQ2B030H
BQ2B035H■
BQ2B040H
BQ2B045H■
BQ2B050H
BQ2B060H
BQ2B070H■
BQ2B080H■
BQ2B090H■
BQ2B100H
BQ2B110H
BQ2B125H
—
149.00
149.00
149.00
149.00
149.00
149.00
149.00
149.00
149.00
224.00
326.00
326.00
326.00
864.00
1112.00
Catalog
Number
HB1B010
HB1B015■
HB1B020■
HB1B025■
HB1B030■
HB1B035■
HB1B040■
HB1B045■
HB1B050■
HB1B060■
HB1B070■
List
Price $
—
113.00
113.00
113.00
113.00
113.00
132.00
132.00
132.00
132.00
142.00
1-Pole
2-Pole Plug-In (Common-Trip 120/240V AC )
MOLDED CASE
CIRCUIT BREAKERS
6
10
15
20
25
30
35
40
45
50
60
70
80
90
100
110
125
BQ2B010
BQ2B015
BQ2B020
BQ2B025
BQ2B030
BQ2B035
BQ2B040
BQ2B045
BQ2B050
BQ2B060
BQ2B070
BQ2B080
BQ2B090
BQ2B100
BQ2B110
BQ2B125
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
149.00
203.00
203.00
203.00
407.00
431.00
HB2B010■
HB2B015■
HB2B020■
HB2B025■
HB2B030■
HB2B035■
HB2B040■
HB2B045■
HB2B050■
HB2B060■
HB2B070■
HB2B080
HB2B090■
HB2B100
HB2B110■
HB2B125
276.00
276.00
276.00
276.00
276.00
276.00
276.00
276.00
338.00
338.00
552.00
624.00
624.00
624.00
1794.00
1794.00
2-Pole
3-Pole
2-Pole Plug-In (Common-Trip 240V AC)
15
20
30
40
50
60
70
80
90
100
BQ2H015
BQ2H020
BQ2H030
BQ2H040■
BQ2H050
BQ2H060
BQ2H070■
BQ2H080■
BQ2H090■
BQ2H100■
203.00
203.00
203.00
203.00
203.00
203.00
269.00
306.00
306.00
306.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3-Pole Plug-In (Common-Trip 240V AC)
10
15
20
25
30
35
40
45
50
60
70
80
90
100
BQ3B010
BQ3B015
BQ3B020
BQ3B025■
BQ3B030
BQ3B035■
BQ3B040
BQ3B045■
BQ3B050
BQ3B060
BQ3B070
BQ3B080
BQ3B090
BQ3B100
254.00
254.00
254.00
254.00
254.00
254.00
254.00
254.00
254.00
254.00
311.00
351.00
351.00
351.00
—
BQ3B015H
BQ3B020H
BQ3B025H■
BQ3B030H
BQ3B035H
BQ3B040H
BQ3B045H
BQ3B050H
BQ3B060H
BQ3B070H
BQ3B080H■
BQ3B090H■
BQ3B100H
—
381.00
381.00
381.00
381.00
381.00
381.00
381.00
381.00
381.00
463.00
543.00
543.00
543.00
UL
Catalog Number
Field/Factory Installed List Price $
add suffix...00S01■
Factory
141.00(adder)
add suffix...00S07■
Factory
141.00(adder)
add suffix...01■
Factory
83.00(adder)
ECPLD1
Field
10.10
ECPLD2
Field
10.20
ECQLD3 (Pkg of 10)
Field
98.00
ECHBD1
Field
9.10
Listed for use with 60/75° wire through 125 amps,
HACR rated.
1A and 1B contacts.
UL Listed for use on 3-phase grounded “B” systems —
10,000 for this application.
6-26
480.00
480.00
480.00
480.00
480.00
480.00
584.00
584.00
584.00
584.00
624.00
734.00
734.00
734.00
Factory Modifications
MP-T / MP-HT / MP-MT Accessories
Description
120V Shunt Trip
24V Shunt Trip
120V Auxiliary Switch
1-Pole Padlocking Device
2-Pole Padlocking Device
3-Pole Padlocking Device
Handle Block
HB3B010
HB3B015■
HB3B020■
HB3B025
HB3B030
HB3B035
HB3B040
HB3B045
HB3B050
HB3B060
HB3B070■
HB3B080■
HB3B090■
HB3B100
UL
Description
Line Side Lugs
Quick Connect Lug
400Hz Calibration
415V 50Hz Calibration
Marine 50˚ C Ambient
Calibration
Fungus Proofing
Listed for frequent switching
applications (SWD). 120V AC Fluorescent Lighting.
Shipped 12 per sleeve.
Shipped 6 per sleeve.
Shipped 4 per sleeve.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Number
add suffix...L
add suffix...QX
add suffix...Y
add suffix...E
List Price $
Consult Siemens
7.50 (adder per pole)
8.00 (adder)
No adder
add suffix...M
No adder
add suffix...F
UL Listed 5KA IR.
Not UL Listed.
1 & 2 Poles only.
10.50 (adder per pole)
■ Built to order. Allow 2-3
weeks for delivery
Discount Schedule MCCB
Molded Case Circuit Breakers
DIN Rail Mounted Circuit Breakers
Selection/Dimensions
1-Pole DIN Rail (120V AC)
“Interrupting Ratings (KA)
(RMS Symmetrical Amperes)”
Volts AC
Breaker
Type
“BQXD
1-Pole
120V
DIN Rail”
Ampere
Rating
10
15
20
25
30
35
40
45
50
60
10
15
20
25
30
35
40
45
50
60
Catalog
Number
BQ1B010QLD
BQ1B015QLD
BQ1B020QLD
BQ1B025QLD
BQ1B030QLD
BQ1B035QLD
BQ1B040QLD
BQ1B045QLD
BQ1B050QLD
BQ1B060QLD
BQ1B010QXD
BQ1B015QXD
BQ1B020QXD
BQ1B025QXD
BQ1B030QXD
BQ1B035QXD
BQ1B040QXD
BQ1B045QXD
BQ1B050QXD
BQ1B060QXD
2-Pole DIN Rail (120/240V AC)
BQ2B010QLD
“BQXD 10
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TA1Q1
TA1Q1
TA1Q1
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
76.00
91.00
91.00
91.00
91.00
91.00
91.00
91.00
91.00
91.00
91.00
120
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
120/240
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
BQ1B015QLD
BQ2B015QLD
BQ1B015QXD
BQ2B015QXD
MOLDED CASE
CIRCUIT BREAKERS
BQ2B015QLD
BQ2B020QLD
BQ2B025QLD
BQ2B030QLD
BQ2B035QLD
BQ2B040QLD
BQ2B045QLD
BQ2B050QLD
BQ2B060QLD
BQ2B010QXD
BQ2B015QXD
BQ2B020QXD
BQ2B025QXD
BQ2B030QXD
BQ2B035QXD
BQ2B040QXD
BQ2B045QXD
BQ2B050QXD
BQ2B060QXD
List
Price $
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
33.50
39.50
39.50
39.50
39.50
39.50
39.50
39.50
39.50
39.50
39.50
6
2-Pole
15
120/240V 20
DIN Rail” 25
30
35
40
45
50
60
10
15
20
25
30
35
40
45
50
60
Load Side
Connector
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TA1Q1
TA1Q1
TA1Q1
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Quick-Connect
Lugs-For Use with BQ, BQH, HBQ햹
Circuit
Breaker
Amp. Rtg.
Line Side
Cab.
Per
Lug
10–40
1
1
1
1
#16–#6 Cu
#12–#6 Al
#8–#1 Cu
#6–#1/0 Al
2
1
1
1
1
1
1
1
1
1
1
1
1
#16 Cu
#14–#10 Cu
#12–#10 Al
#14–#6 Cu
#12–#10 Al
#8–#6 Cu
#8–#4 Al
#8–#4 Cu
#8–#2 Al
#4–#1/0 Cu
#2–#1/0 Al
#2–#1/0 Cu
#1/0–#2/0 Al
45–100
Load Side
10
15–20
25–35
40–50
55–70
80–100
110–125
Lug
Wire Range
AWG
Catalog
Number
TC1Q1 햲 햳
2.60
TA1Q1
2.60
Connectors are
Supplied with
Circuit Breaker
are UL Listed for 60°/75°C conductors. Also
CSA Listed.
has steel construction.
Discount Schedule MCCB
Amperes
L
D1
D2
BQ, BQH
BQ, BQH
HBQ
BQXD
15–50
55–125
15–125
15–60
33⁄4
4
4
41⁄2
23⁄8
23⁄8
23⁄8
23⁄8
3
3
3
3
Protects against accidental contact with lugs–1 per lug. Fits line and load end.
■ Built to order. Allow 2–3 weeks for delivery.
햳 Connector
Dimensions (inches)
Breaker
Type
Finger Safe Terminal Shield
For inches / millimeters conversion,
see Application Data section.
햲 Terminals
List
Price $
(Qty. 6)
Catalog Number
Qty
List Price $ each
BQFS2
2
2.10
BQFS1K
1000
1.40
Enclosures
햴 Surface
Type
Catalog Number 햷
1
EB3100S 햴햸
189.00
3R
WB3100
249.00
mounted indoor. If flush mounting is required,
replace suffix “S” in catalog number with suffix “F”.
햵 Discount Schedule B.
햶 Does not include circuit breaker. Order circuit breaker
separately.
햷 Neutral included in enclosure.
햸 Enclosure will not accept circuit breakers with shunt
trips or auxiliary switches installed.
List Price $ 햵햶
햹 Type
BQXD uses TA1Q1 or TC1Q1 lugs on line side of
circuit breaker.
Enclosures Section 5
Accessories pages 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-27
Molded Case Circuit Breakers
QJ 225A Frame
Selection/Dimensions
Type QJ2
Ordering Information
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
240V AC
Catalog
Number
List
Price $
240V AC
Catalog
Number
List
Price $
060
070
080
090
100
110
125
150
175
200
225
QJ22B060■
QJ22B070■
QJ22B080■
QJ22B090■
QJ22B100
QJ22B110■
QJ22B125
QJ22B150
QJ22B175
QJ22B200
QJ22B225
422.00
422.00
422.00
422.00
422.00
422.00
422.00
422.00
422.00
422.00
422.00
QJ23B060
QJ23B070
QJ23B080■
QJ23B090■
QJ23B100
QJ23B110
QJ23B125
QJ23B150
QJ23B175
QJ23B200
QJ23B225
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
1106.00
QJH22B060■
QJH22B070■
QJH22B080■
QJH22B090■
QJH22B100■
QJH22B110■
QJH22B125
QJH22B150
QJH22B175■
QJH22B200
QJH22B225
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
QJH23B060■
QJH23B070■
QJH23B080■
QJH23B090■
QJH23B100
QJH23B110
QJH23B125
QJH23B150
QJH23B175
QJH23B200
QJH23B225
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
1548.00
Type QJH2
060
070
080
090
100
110
125
150
175
200
225
Type
QJ2H
QJ22B060H■
QJ22B070H■
QJ22B080H■
QJ22B090H■
QJ22B100H■
QJ22B110H■
QJ22B125H
QJ22B150H
QJ22B175H■
QJ22B200H
QJ22B225H
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
1255.00
QJ23B060H■
QJ23B070H■
QJ23B080H■
QJ23B090H■
QJ23B100H
QJ23B110H■
QJ23B125H
QJ23B150H
QJ23B175H
QJ23B200H
QJ23B225H
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
1964.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HQJ23B100H
HQJ23B110H
HQJ23B125H
HQJ23B150H
HQJ23B175H
HQJ23B200H
HQJ23B225H
▲2234.00
▲2234.00
▲2234.00
2234.00
▲2234.00
2234.00
▲2234.00
50° C Calibration - See page 6-84.
400HZ. - See page 6-84.
Shipping Weights
QJ2, QJH2, QJ2H, HQJ2H
Number of
Poles
Number per
Carton
Shipping
Weight (lbs.)
2
3
10
10
30
41
Lugs For 75°C Wire
Catalog
Number
Lug
Body
Lug
Wire Range
TA1Q300
Al
(1) #6—300 kcmil Cu
(1) #4—300 kcmil Al
TC1Q250
Cu
(1) #6—250 kcmil Cu
Enclosures (Neutral Included)
Type
Catalog
Number
List
Price $
1
3R (2-pole)
3R (3-pole)
EB3225(S)(F)
WB2225
WB3225
226.00
418.00
459.00
UL 489 Interrupting Ratings
Breaker
Type
AIR @ 240V AC
QJ2
QJH2
QJ2H
HQJ2H
010,000
022,000
042,000
100,000
Type HQJ2H
100
110
125
150
175
200
225
7''
3''
2-pole
QJ2
Internal Accessories (Factory installed only) (3-pole only)
Add suffix to catalog number and adder to list price.
4.5'' 3-pole
Auxiliary Switches
Control Voltage
Shunt Trip
AC
Suffix
DC
Suffix
Shunt Trip and
1A and 1B Auxiliary Switch
2A and 2B
List Adder $
Suffix
List Adder $
Suffix
List Adder $
00S01■
325.
A01■
265.
A02■
532.
01S01■
590.
24
00S07■
325.
A01■
265.
A02■
532.
01S07■
590.
125
00S11■
325.
A01■
265.
A02■
532.
01S11■
590.
120/240
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
See Note: A page 6-73.
Note: QJ breakers are UL Listed for reverse feed
applications.
6-28
1A and 1B
List Adder $
2.5 D
3''
MOLDED CASE
CIRCUIT BREAKERS
6
060
070
080
090
100
110
125
150
175
200
225
Load side TA1Q300 lugs are mounted and
included when circuit breaker is ordered.
For line and load lugs (TA1Q300) installed at
no additional charge, add suffix “L” to catalog
number.
HACR
rated.
accessories are not available on 2-pole QJ
breakers.
Internal
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Enclosures Section 5
Accessories pages 6-86 to 6-91
Discount Schedule MCCB
Molded Case Circuit Breakers
CQD 100A Frame
Selection/Dimensions
Type CQD (Cable In - Cable Out) DIN Rail Mount
Shipping Weights
1-Pole
2-Pole
Continuous
Current Rating
@ 40°C
277V AC
125V DC
480Y/277V AC
125/250V DC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
115
120
125
130
CQD115
CQD120
CQD125
CQD130
140.00
140.00
140.00
140.00
CQD215
CQD220
CQD225
CQD230
305.00
305.00
305.00
305.00
CQD315
CQD320
CQD325
CQD330
543.00
543.00
543.00
543.00
135
140
145
150
160
CQD135■
CQD140■
CQD145■
CQD150■
CQD160■
CQD170■
CQD180■
CQD190■
CQD1100■
140.00
140.00
140.00
140.00
140.00
CQD235■
CQD240
CQD245■
CQD250
CQD260
305.00
305.00
305.00
305.00
305.00
CQD335
CQD340
CQD345■
CQD350
CQD360
543.00
543.00
543.00
543.00
543.00
256.00
256.00
256.00
256.00
CQD270
CQD280
CQD290■
CQD2100
606.00
606.00
606.00
606.00
CQD370
CQD380
CQD390
CQD3100
735.00
735.00
735.00
735.00
170
180
190
100
3-Pole
480Y/277V AC
Number of
Poles
Number per
Carton
Shipping
Weight lbs. (kg)
1
2
3
1
1
1
0.5 (0)
1.0 (0)
1.5 (1)
Lugs For 60/75°C Wire
Amps
Wire Size
15–40
#14–#6 AWG Cu
#12–#6 AWG Al
45–100
#8–#1 AWG Cu
#6–#1/0 AWG Al
Type CQD6 (Cable In - Cable Out) CSA Certified, not UL
Continuous
Current Rating
@ 40°C
600Y/347V AC
125/250V DC
3-Pole
600Y/347V AC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
—
CQD6120 ■
CQD6125 ■
CQD6130 ■
CQD6135■
CQD6140■
CQD6145■
CQD6150■
CQD6160■
CQD6170■
—
140.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
CQD6215■
CQD6220■
CQD6225■
CQD6230■
CQD6235■
CQD6240■
CQD6245■
CQD6250■
CQD6260■
CQD6270■
305.00
305.00
305.00
305.00
305.00
305.00
305.00
305.00
305.00
CQD6315■
CQD6320■
CQD6325■
CQD6330■
CQD6335■
CQD6340■
CQD6345■
CQD6350■
CQD6360■
—
543.00
543.00
543.00
543.00
543.00
543.00
543.00
543.00
543.00
256.00
606.00
CQD, CQD6
4.9
—
MOLDED CASE
CIRCUIT BREAKERS
170
2-Pole
347V AC
125V DC
Interrupting Ratings
RMS Symmetrical Amperes (KA)
Breaker
Type
Number
of Poles
CQD
(UL)
CQD6
(CSA)
Volts AC (50/60 Hz)
CQD, CQD6
Volts DC
120
240
277
480/277
600/347
125
125/250
1
2
3
65
—
—
—
65
65
14
—
—
—
14
14
—
—
—
14
—
—
—
14
—
1
2
3
65
—
—
—
65
65
14
—
—
—
—
—
10
10
10
14
—
—
—
14
—
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
SWD
rated.
Note: CQD breakers are UL Listed for reverse feed
applications.
Discount Schedule MCCB
HID
rated.
rated.
HACR
Enclosures Section 5
Accessories pages 6-31 and 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6
115
120
125
130
135
140
145
150
160
1-Pole
6-29
Molded Case Circuit Breakers
NGG 125A Frame
Selection/Dimensions
Type NGG (Cable In - Cable Out)
1-Pole
Continuous
Ampere Rating
@ 40°C
2-Pole
Catalog
Number
List
Price
$
15
20
25
30
NGG1B015L
NGG1B020L
NGG1B025L
NGG1B030L
35
40
45
50
60
3-Pole
Catalog
Number
List
Price
$
Catalog
Number
List
Price
$
161.00
161.00
161.00
161.00
NGG2B015L
NGG2B020L
NGG2B025L
NGG2B030L
504.00
504.00
504.00
504.00
NGG3B015L
NGG3B020L
NGG3B025L
NGG3B030L
660.00
660.00
660.00
660.00
NGG1B035L
NGG1B040L
NGG1B045L
NGG1B050L
NGG1B060L
161.00
161.00
161.00
161.00
161.00
NGG2B035L
NGG2B040L
NGG2B045L
NGG2B050L
NGG2B060L
504.00
504.00
504.00
504.00
504.00
NGG3B035L
NGG3B040L
NGG3B045L
NGG3B050L
NGG3B060L
660.00
660.00
660.00
660.00
660.00
70
80
90
100
NGG1B070L
NGG1B080L
NGG1B090L
NGG1B100L
271.00
271.00
271.00
271.00
NGG2B070L
NGG2B080L
NGG2B090L
NGG2B100L
669.00
669.00
669.00
669.00
NGG3B070L
NGG3B080L
NGG3B090L
NGG3B100L
777.00
777.00
777.00
777.00
110
125
NGG1B110L
NGG1B125L
547.00
547.00
NGG2B110L
NGG2B125L
1339.00
1339.00
NGG3B110L
NGG3B125L
1544.00
1544.00
NGG
2.9
5.4
Line and load lugs are included as standard. If no lugs are required, remove the “L” suffix.
HACR rated.
Suitable for screws or DIN rail mounting.
MOLDED CASE
CIRCUIT BREAKERS
6
Shipping Weights
NGG
Number of
Poles
Number per
Carton
Shipping
Weight lbs. (kg)
1
2
3
1
1
1
.75 (0.34)
1.3 (0.59)
2.0 (0.98)
Lugs For 60/75°C Wire
NGG
Ampere Rating
Wire Size
Catalog Number
15–30A
#14–#6 AWG Cu
#12–#6 AWG Al
TC1Q1 (qty. 1)
3TC1Q1 (qty. 3)
List Price $
35–125A
#8–#1/0 AWG Cu
#4–#2/0 AWG Al
3TC1GG20 (qty. 3)
13.40
15–125A
Nut Keeper plate w/ screw
(for crimp terminals)
TNKG3 (qty. 3)
17.90
2.60
7.20
Interrupting Ratings
Breaker
Type
NGG
Number
of
Poles
01
2, 3
UL 489 AIR
RMS Symmetrical Amperes (KA)
Volts AC(50/60Hz)
120
240
277
347
65
—
25
14
0—
65
—
—
480
—
25
Volts DC
600/347 125
125/250
0—
14
—
14
0—
14
IEC 947-2
Volts AC (50/60Hz)
220/240
380/415
lcu
lcs
lcu
25
12.5
—
65
33
25
lcs
—
12.5
Volts DC
125/250
—
14
For inches / millimeters conversion, see Application Data section.
SWD
rated.
rated at 15-50A 1-pole @ 277 VAC; 2 & 3-pole @
480 VAC
125/250V
DC rating applies to 2-pole NGG only.
HID
6-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Enclosures Section 5
Accessories pages 6-31 and 6-86 to 6-91
Discount Schedule MCCB
Molded Case Circuit Breakers
Accessories for CQD 100A Frame, NGG and NGB 125A Frame햲
Selection
Shunt Trip
Control Voltage
V AC
V DC
CQD, CQD6, NGG, NGB
Catalog Number
List
Price $
120
240
277
480
600
—
—
—
—
—
CQDST120
CQDST240▲
CQDST277▲
CQDST480▲
CQDST600
636.00
636.00
636.00
636.00
636.00
—
—
—
—
012
024
048
125
CQDST12
CQDST24
CQDST48
CQDST125
636.00
636.00
636.00
636.00
Auxiliary Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
CQD, CQD6,
NGG, NGB
Catalog Number
List Price $
CQDA1
CQDA2
271.00
540.00
CQD with Accessory Installed
Alarm Switch
Maximum
Voltage
AC
DC
CQD, CQD6,
NGG, NGB
Catalog Number
240
125
CQDBA
List Price $
271.00
Shunt Trip and Auxiliary Switch
Combinations
Shunt Trip
Voltage
CQDST24AAS▲
897.00
120
CQDST120AAS▲
897.00
240
CQDST240AAS▲
897.00
277
CQDST277AAS▲
897.00
480
CQDST480AAS▲
897.00
600
CQDST600AAS▲
897.00
12
CQDST12DAS▲
897.00
24
CQDST24DAS▲
897.00
48
CQDST48DAS▲
897.00
125
CQDST125DAS▲
897.00
DC
MOLDED CASE
CIRCUIT BREAKERS
List Price $
24
AC
6
CQD, CQD6,
NGG, NGB
Catalog Number
Alarm and Auxiliary Switch
Combinations
For Breaker
Catalog Number
List Price
CQD, CQD6, NGG, NGB
CQDA1BA▲
540.00
▲ Built to order. Allow 6–8 weeks for delivery.
햲 Adds
1-pole space for accessory.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-31
Molded Case Circuit Breakers
EG 125A Frame
Selection/Dimensions
Type NEG (Cable In - Cable Out)
1-Pole
Continuous
Ampere Rating
@ 40°C
2-Pole
Catalog
Number
List
Price
$
15
20
25
30
NEG1B015L
NEG1B020L
NEG1B025L
NEG1B030L
35
40
45
50
60
3-Pole
Catalog
Number
List
Price
$
297.00
297.00
297.00
297.00
NEG2B015L
NEG2B020L
NEG2B025L
NEG2B030L
NEG1B035L
NEG1B040L
NEG1B045L
NEG1B050L
NEG1B060L
297.00
297.00
297.00
297.00
297.00
70
80
90
100
NEG1B070L
NEG1B080L
NEG1B090L
NEG1B100L
110
125
NEG1B110L
NEG1B125L
4-Pole
Catalog
Number
List
Price
$
Catalog
Number
List
Price
$
743.00
743.00
743.00
743.00
NEG3B015L
NEG3B020L
NEG3B025L
NEG3B030L
930.00
930.00
930.00
930.00
NEG4B015L
NEG4B020L
NEG4B025L
NEG4B030L
1210.00
1210.00
1210.00
1210.00
NEG2B035L
NEG2B040L
NEG2B045L
NEG2B050L
NEG2B060L
743.00
743.00
743.00
743.00
743.00
NEG3B035L
NEG3B040L
NEG3B045L
NEG3B050L
NEG3B060L
930.00
930.00
930.00
930.00
930.00
NEG4B035L
NEG4B040L
NEG4B045L
NEG4B050L
NEG4B060L
1210.00
1210.00
1210.00
1210.00
1210.00
338.00
338.00
338.00
338.00
NEG2B070L
NEG2B080L
NEG2B090L
NEG2B100L
845.00
845.00
845.00
845.00
NEG3B070L
NEG3B080L
NEG3B090L
NEG3B100L
1056.00
1056.00
1056.00
1056.00
NEG4B070L
NEG4B080L
NEG4B090L
NEG4B100L
1376.00
1376.00
1376.00
1376.00
747.00
747.00
NEG2B110L
NEG2B125L
1864.00
1864.00
NEG3B110L
NEG3B125L
2330.00
2330.00
NEG4B110L
NEG4B125L
3029.00
3029.00
HEG
3.0
5.5
Type HEG (Cable In - Cable Out)
1-Pole
MOLDED CASE
CIRCUIT BREAKERS
6
Continuous
Ampere Rating
@ 40°C
2-Pole
Catalog
Number
List
Price
$
15
20
25
30
HEG1B015L
HEG1B020L
HEG1B025L
HEG1B030L
35
40
45
50
60
3-Pole
Catalog
Number
List
Price
$
Catalog
Number
414.00
414.00
414.00
414.00
HEG2B015L
HEG2B020L
HEG2B025L
HEG2B030L
966.00
966.00
966.00
966.00
HEG3B015L
HEG3B020L
HEG3B025L
HEG3B030L
HEG1B035L
HEG1B040L
HEG1B045L
HEG1B050L
HEG1B060L
414.00
414.00
414.00
414.00
414.00
HEG2B035L
HEG2B040L
HEG2B045L
HEG2B050L
HEG2B060L
966.00
966.00
966.00
966.00
966.00
HEG1B070L
HEG1B080L
HEG1B090L
HEG1B100L
492.00
492.00
492.00
492.00
HEG2B070L
HEG2B080L
HEG2B090L
HEG2B100L
110
HEG1B110L
1031.00
125
HEG1B125L
1031.00
Line and load lugs are included as standard.
HACR rated.
Suitable for screw mounting.
HEG2B110L
HEG2B125L
70
80
90
100
4-Pole
List
Price
$
Catalog
Number
List
Price
$
1133.00
1133.00
1133.00
1133.00
HEG4B015L
HEG4B020L
HEG4B025L
HEG4B030L
1474.00
1474.00
1474.00
1474.00
HEG3B035L
HEG3B040L
HEG3B045L
HEG3B050L
HEG3B060L
1133.00
1133.00
1133.00
1133.00
1133.00
HEG4B035L
HEG4B040L
HEG4B045L
HEG4B050L
HEG4B060L
1474.00
1474.00
1474.00
1474.00
1474.00
1098.00
1098.00
1098.00
1098.00
HEG3B070L
HEG3B080L
HEG3B090L
HEG3B100L
1260.00
1260.00
1260.00
1260.00
HEG4B070L
HEG4B080L
HEG4B090L
HEG4B100L
1638.00
1638.00
1638.00
1638.00
2136.00
2136.00
HEG3B110L
HEG3B125L
2561.00
2561.00
HEG4B110L
HEG4B125L
3330.00
3330.00
NEG, HEG
Lugs For 60/75°C Wire
Shipping Weights
NEG/HEG
Number of
Poles
Number per
Carton
Shipping
Weight lbs. (kg)
1
2
3
4
1
1
1
1
1.1
2.0
3.1
3.9
(0.5)
(0.9)
(1.4)
(1.8)
Ampere Rating
Wire Size
Catalog Number
List Price $
15–125A
#14 – 3/0 AWG Cu (steel lugs)
3TW1EG30 (qty. 3)
12.80
15–125A
#14 – 1/0 AWG Cu
#14 – 1/0 AWG Al
3TA1EG10 (qty. 3)
12.80
15–125A
#6 - 3/0 AWG Cu
#6 - 3/0 AWG AI
3TA1EG30 (qty. 3)
12.80
15–125A
Nut Keeper plate w/ screw
(for crimp terminals)
TNKE3 (qty. 3)
12.30
Interrupting Ratings
Breaker
Type
NEG
HEG
Number
of
Poles
01
2, 3, 4
01
2, 3, 4
UL 489 AIR
RMS Symmetrical Amperes (KA)
Volts AC(50/60Hz)
240
277
347
480
085
35
22
—
085
—
—
35
0100
65
25
—
0100
—
—
65
600/347
—
22
—
25
Volts DC
125
125/250
35
—
—
35
42
—
—
42
IEC 60947-2
Volts AC (50/60Hz)
220/240
380/415
lcu
lcs
lcu
85
43
—
85
43
40
100
50
—
100
50
70
lcs
—
20
—
35
Volts DC
125
125/250
35
—
—
35
42
—
—
42
For inches / millimeters conversion, see Application Data section.
SWD
Applies
HID
Optional
rated.
rated 277 VAC.
6-32
to 3 & 4-pole breakers only.
lugs for NEG and HEG
breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Accessories pages 6-33 and 6-86 to 6-91
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories for NEG and HEG 125A Frame
Selection
Shunt Trip
Control Voltage
V AC
V DC
NEG, HEG
Catalog Number
List Price $
110-240
380-600
24-60
125
—
24-60
STRER240
STREV600
STREM60D
636.00
636.00
636.00
Auxiliary Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
NEG, HEG
Catalog Number
List Price $
ASKE2
ASKE3
271.00
540.00
Alarm Switch
Maximum
Voltage
AC
DC
Number
of
Contacts
240
240
125
125
1A–1B
2A–2B
NEG, HEG
Catalog Number
List Price $
ASKE1
ASKE5
271.00
540.00
Undervoltage Trip
Control
Voltage
UVREM60▲
636.00
120
UVREN120
636.00
240
UVRER240
636.00
480
UVREU480▲
636.00
600
UVREV600▲
636.00
24
24
UVREB24AD
636.00
48
UVREC48D▲
636.00
125
UVRED125D▲
636.00
250
UVREE250D▲
636.00
MOLDED CASE
CIRCUIT BREAKERS
List Price $
60
DC
6
NEG, HEG
Catalog Number
AC
Alarm and Auxiliary Switch
Combinations
For Breaker
NEG, HEG
Catalog Number
ASKE6
List Price $
540.00
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-33
Molded Case Circuit Breakers
ED 125A Frame Sentron Series
Selection
Ordering Instructions
All ED Frame Sentron circuit breakers are supplied with load side lugs. If line side lugs are required, add ”L” suffix to catalog number.
Consult Siemens sales office for any addditional charge
50°C Calibration, 400HZ - see page 6-84. All ED frame circuit breakers may be reverse connected
Type ED2
Blue Label
1-Pole
Continuous
Current Rating
@ 40° C
015
020
25
030
35
040
45
050
060
070
80
90
100
2-Pole
120V AC
125V DC 240V AC
125V DC
250V DC 240V AC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
ED21B015■
ED21B020■
ED21B025■
ED21B030■
ED21B035■
ED21B040■
ED21B045■
ED21B050■
ED21B060■
ED21B070■
ED21B080■
ED21B090■
ED21B100■
125.00
125.00
125.00
125.00
125.00
125.00
125.00
125.00
125.00
ED22B015
ED22B020
ED22B025■
ED22B030
ED22B035■
ED22B040
ED22B045■
ED22B050
ED22B060
288.00
288.00
288.00
288.00
288.00
288.00
288.00
288.00
288.00
ED23B015
ED23B020
ED23B025■
ED23B030
ED23B035■
ED23B040
ED23B045■
ED23B050
ED23B060
428.00
428.00
428.00
428.00
428.00
428.00
428.00
428.00
428.00
230.00
230.00
230.00
230.00
ED22B070
ED22B070■
ED22B090■
ED22B100
470.00
470.00
470.00
470.00
ED23B070
ED23B080
ED23B090■
ED23B100
613.00
613.00
613.00
613.00
Type ED4
6
MOLDED CASE
CIRCUIT BREAKERS
2-Pole
3-Pole
Continuous
Current Rating
@ 40° C
120V AC
277V AC
125V DC
480V AC
250V DC 480V AC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
015
020
025
030
035
040
045
050
060
ED41B015
ED41B020
ED41B025
ED41B030
ED41B035■
ED41B040
ED41B045■
ED41B050
ED41B060
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
170.00
ED42B015
ED42B020
ED42B025
ED42B030
ED42B035■
ED42B040
ED42B045■
ED42B050
ED42B060
521.00
521.00
521.00
521.00
521.00
521.00
521.00
521.00
521.00
ED43B015
ED43B020
ED43B025
ED43B030
ED43B035
ED43B040
ED43B045
ED43B050
ED43B060
684.00
684.00
684.00
684.00
684.00
684.00
684.00
684.00
684.00
070
080
090
100
ED41B070
ED41B080■
ED41B090■
ED41B100
289.00
289.00
289.00
289.00
ED42B070
ED42B080■
ED42B090■
ED42B100
686.00
686.00
686.00
686.00
ED43B070
ED43B080
ED43B090
ED43B100
804.00
804.00
804.00
804.00
110
125
—
—
—
—
ED42B110■
ED42B125
1386.00
1386.00
ED43B110
ED43B125
1594.00
1594.00
Catalog
Number
Type ED6
List
Price $
Blue Label
1-Pole
2-Pole
3-Pole
Continuous
Current Rating
@ 40° C
600V AC
250V DC
600V AC
500V DC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
015
020
025
030
035
040
045
050
060
ED61B015
ED61B020
ED61B025
ED61B030
ED61B035
ED61B040
ED61B040■
ED61B050
ED61B060
349.00
349.00
349.00
349.00
349.00
349.00
349.00
349.00
349.00
613.00
613.00
613.00
613.00
613.00
613.00
613.00
613.00
613.00
ED63B015
ED63B020
ED63B025
ED63B030
ED63B035
ED63B040
ED63B045
ED63B050
ED63B060
778.00
778.00
778.00
778.00
778.00
778.00
778.00
778.00
778.00
070
080
090
100
ED61B070■
ED61B080
ED61B090
ED61B100■
—
—
480.00
480.00
480.00
480.00
ED62B015
ED62B020
ED62B025■
ED62B030
ED62B035■
ED62B040■
ED62B045■
ED62B050■
ED62B060■
ED62B070■
ED62B080■
ED62B090■
ED62B100■
—
—
773.00
773.00
773.00
773.00
ED63B070
ED63B080
ED63B090
ED63B100
973.00
973.00
973.00
973.00
—
—
ED63B110
ED63B125
1872.00
1872.00
110
125
347V AC
—
—
Note: ED frame circuit breakers qualified to UL 489
Supplement SB “Naval”— See page 6-84 for additional information
■ Built to order. Allow 2–3 weeks for delivery.
6-34
Number per
Carton
Shipping
Weight (lbs.)
ED2, ED4, ED6, HED4, HHED6
Blue Label
1-Pole
Shipping Weights
Number of
Poles
3-Pole
1
2
3
30
10
10
38
25
38
5
5
20
30
CED6
2
3
Lugs
Ampere
Rating
No. of
Poles
Catalog
Number
Wire
Range
Aluminum Body Lugs
All 15–25A
1, 2, 3
All 30–100A
1, 2, 3
ED2, 4, CED6
1
30–60A
ED2, 4, CED6
1
70–100A
ED2, 4, 6,
HED4, HHED6 2, 3
30–100A
All 110, 125A
2, 3
Line/Load
SA1E025
Line Side
LN1E100
Load Side
LD1E060
Load Side
LD1E100
#14–#10 Cu
#12–#10 Al
Load Side
LN1E100
#10–1/0 Cu/Al
Line/Load
TA1E6125
#3–3/0 Cu
#1–2/0 Al
Line/Load
TC1ED6150
#10–1/0 Cu only
CCE125
2/0
#10–1/0 Cu/Al
#10–#4 Cu/Al
#6–#1/0 Cu/Al
Copper Body Lugs
All 30–125A
1, 2, 3
Compression Lugs
All ED, HHED, CED
Enclosures (Neutral Included)
Type
1 (Surface)
1 (Flush)
3R
4–4X
7–9
7–9
12
1 (Surface)
1 (Flush)
3R
12
Catalog Number
E2N1S (15–100A)
E2N1F (15–100A)
E2N3R (15–100A)
ED6SS4 (15–100A)
EA (15–60A)
EB (70–100A)
E2N12 (15–100A)
CED6N1S
CED6N1F
CED6N3R
CED6N12
List Price $
149.00
149.00
410.00
2841.00
1750.00
2176.00
254.00
271.00
271.00
725.00
449.00
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-36 and 6-86 to 6-91
CSA
Certified only (Not UL)
CED types and all 110–125 ampere ED frames.
Note: A, page 6-81.
SWD rated.
HACR rated.
For
See
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
ED 125A Frame Sentron Series
Selection/Dimensions
Type HED4
Black Label
2-Pole
FIGURE1 - ED, HED, HHED
3-Pole
1-Pole
480V AC
List
Price $
Catalog
Number
List
Price $
HED41B015
HED41B020
HED41B025
HED41B030
HED41B035■
HED41B040
HED41B045■
HED41B050■
HED41B060■
HED41B070■
HED41B080■
HED41B090■
HED41B100■
—
—
397.00
397.00
397.00
397.00
397.00
397.00
397.00
397.00
397.00
HED42B015
HED42B020
HED42B025■
HED42B030
HED42B035■
HED42B040
HED42B045■
HED42B050
HED42B060■
HED42B070■
HED42B080■
HED42B090■
HED42B100■
HED42B110■
HED42B125■
929.00
929.00
929.00
929.00
929.00
929.00
929.00
929.00
929.00
HED43B015
HED43B020
HED43B025
HED43B030
HED43B035
HED43B040
HED43B045
HED43B050
HED43B060
1140.00
1140.00
1140.00
1140.00
1140.00
1140.00
1140.00
1140.00
1140.00
1070.00
1070.00
1070.00
1070.00
HED43B070
HED43B080
HED43B090
HED43B100
1227.00
1227.00
1227.00
1227.00
2176.00
2176.00
HED43B110
HED43B125
2510.00
2510.00
—
—
W1
W3
W2
1-POLE
2-POLE
3-POLE
FIGURE 2 - CED (3-Pole shown)
D
2-Pole
600V AC, 250V DC
Catalog
List
Number
Price $
CED62B015 2756.00
CED62B020■ 2756.00
—
—
CED62B030■ 2756.00
—
—
CED62B040■ 2756.00
—
——
CED62B050■ 2756.00
CED62B060■ 2756.00
CED62B070■ 2756.00
CED62B080■ 2756.00
CED62B090■ 2756.00
CED62B100■ 2756.00
—
—
CED62B125■ 4135.00
D1
H
3-Pole
600V AC, 500V DC
Catalog
List
Number
Price $
CED63B015 3200.00
CED63B020 3200.00
—
——
CED63B030 3200.00
—
——
CED63B040 3200.00
—
——
CED63B050 3200.00
CED63B060 3200.00
CED63B070 3200.00
CED63B080 3200.00
CED63B090 3200.00
CED63B100 3200.00
CED63B110■ 4885.00
CED63B125 4885.00
W2, W3
Dimensions (in inches)
Breaker Type
W1
W2
W3
H
D
D1
Figure 1
ED2, ED4, ED6, HED4,
ED6 ETI
1
2
3
6.35
3.92
4.56
Figure 1
HHED6
—
2
3
6.53
3.92
4.56
Figure 2
CED6, CED6 ETI
—
2
3
9.58
3.92
4.56
Interrupting Ratings
Breaker
Type
ED2 (1-P)
ED2 (2, 3-P)
ED4 (1-P)
ED4 (2, 3-P)
ED6 (1P)
ED6 (2, 3-P)
HED4 (1-P)
(15–30A)
HED4 (1-P)
(35–100A)
HED4 (2, 3-P)
HHED6 (2, 3-P)
CED6 (2, 3-P)
UL 489 AIR (File #E10848)
RMS Symmetrical Amperes (KA)
Volts AC
120
240
277
347
480
010
—
—
—
—
—
010
—
—
—
065
—
22
—
—
—
065
—
—
18
—
—
—
—
30
—
065
—
—
25
600
—
—
—
—
—
18
Volts DC
125
250
05
—
—
05 (2-P)
30
—
—
30 (2-P)
—
—
—
500
—
—
—
—
—
18 (3-P)
IEC 947-2
Volts AC (50/60Hz)
220/240
380/415
lcu
lcs
lcu
lcs
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
65
17
35
9
500
lcu
—
—
—
—
—
18
lcs
—
—
—
—
—
5
100
—
65
—
—
—
30
—
—
—
—
—
—
—
—
100
—
100
100
200
25
—
—
30
—
—
018
100
—
—
—
30 (2-P)
—
50 (2-P)
—
—
—
—
42
0 65
200
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■ Built to order. Allow 2–3 weeks for delivery.
SWD
rated.
When wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded UPS
systems.
Discount Schedule MCCB
HED4
—
50 (3-P)
and HHED6 type circuit breakers meet the UL
criteria for “current limiting” at 240V AC.
ED6-ETI, CED6-ETI, see page 6-66 for ordering
information.
Single
Pole 15-30A 30KA @ 347V non-UL.
35-100A 18KA @ 347V non-UL.
HACR rated.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-35
MOLDED CASE
CIRCUIT BREAKERS
List
Price $
1183.00
1183.00
1183.00
1183.00
1183.00
1183.00
1183.00
1183.00
1183.00
1344.00
1344.00
1344.00
1344.00
2633.00
2633.00
6
List
Price $
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1010.00
1174.00
1174.00
1174.00
1174.00
2262.00
2262.00
3-Pole
600V AC
Catalog
Number
HHED63B015
HHED63B020
HHED63B025
HHED63B030
HHED63B035
HHED63B040
HHED63B045
HHED63B050
HHED63B060
HHED63B070
HHED63B080
HHED63B090
HHED63B100
HHED63B110
HHED63B125
Fuseless Current Limiting
Type CED6
Red Label
Black Label
2-Pole
600V AC
Catalog
Number
HHED62B015■
HHED62B020■
HHED62B025■
HHED62B030■
HHED62B035■
HHED62B040■
HHED62B045■
HHED62B050■
HHED62B060■
HHED62B070■
HHED62B080■
HHED62B090■
HHED62B100■
HHED62B110■
HHED62B125■
D1
H
449.00
449.00
449.00
449.00
D
Type HHED6
Continuous
Current
Rating
@ 40°C
015
020
025
030
035
040
045
050
060
070
080
090
100
110
125
250V DC
Catalog
Number
110
125
480V AC
List
Price $
070
080
090
100
125V DC
Catalog
Number
015
020
025
030
035
040
045
050
060
277V AC
Continuous
Current Rating
@ 40° C
Molded Case Circuit Breakers
Accessories
Accessories for:
ED 125A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip
AC
Catalog Number
Catalog Number
Catalog Number
Catalog Number
Catalog Number
S17ED60
S18ED60
S01ED60
—
S03ED60
S15ED60▲
S04ED60
—
—
S01ED62A
S02ED62A▲
S03ED62A
S15ED64A▲
S04ED64A▲
—
—
S01ED62AB
S02ED62AB▲
S03ED62AB
S15ED64AB▲
S04ED64AB▲
—
—
S01ED62B
S02ED62B▲
S03ED62B▲
S15ED64B▲
S04ED64B▲
—
—
S01ED62AA
S02ED62AA▲
S03ED62AA▲
—
—
S16ED60▲
S07ED60
S09ED60▲
S11ED60▲
S13ED60▲
S16ED62A▲
S07ED62A
S09ED62A▲
S11ED62A▲
S13ED62A▲
—
S07ED62AB▲
S09ED62AB▲
S11ED62AB▲
S13ED62AB▲
—
S07ED62B▲
S09ED62B▲
S11ED62B▲
S13ED62B▲
—
S07ED62AA▲
S09ED62AA▲
S11ED62AA▲
S13ED62AA▲
897.00
1157.00
897.00
1157.00
DC
024
048
120
208
240
277
480
Combinations
Available only when ordered together.
Only one module can be added to a
breaker. Additional accessories, which
always attach to the left pole, cannot be
added to the combination later. Adds 1
inch pole space.
MOLDED CASE
CIRCUIT BREAKERS
6
Equipment
Ground Sensing
A field addable kit containing 30mA or
5 mA ground fault accessory module,
current transformer with 24 inch leads,
and current transformer mounting
equipment. Current transformer to
mount in gutter of lighting panel or
any control panel. Accessory module
operates from separate 120V control
power source.
Both 30MA and 5MA devices are
equipment protection devices only.
Do not use for personnel protection.
1 Shunt Trip
1 Shunt Trip and 1 Auxiliary Switch
1 Auxiliary Switch and 1 Alarm Switch
Control
Voltage
012
024
048
125
250
List Price $: 636.00
1 Shunt Trip and
1 Alarm Switch
1 Shunt Trip and 2
Auxiliary Switches
Undervoltage Trip Combinations
Control
Voltage
AC
1 Undervoltage
Trip
DC
120
208
240
277
480
600
024
048
125
250
1 Undervoltage Trip
1 Undervoltage
and 1 Auxiliary
1 Undervoltage
Trip and
Switch and
Trip and
1 Auxiliary Switch 1 Alarm Switch
1 Alarm Switch
1 Undervoltage
Trip and 2
Auxiliary Switches
Catalog Number
Catalog Number
Catalog Number
Catalog Number
Catalog Number
U01ED60
U02ED60▲
U03ED60
U16ED60▲
U06ED60▲
U08ED60▲
U01ED62A
U02ED62A▲
U03ED62A▲
U16ED64A▲
U06ED64A▲
—
U01ED62AB▲
U02ED62AB▲
U03ED62AB▲
U16ED64AB▲
U06ED64AB▲
—
U01ED62B▲
U02ED62B▲
U03ED62B▲
U16ED64B▲
U06ED64B▲
—
U01ED62AA▲
U02ED62AA▲
U03ED62AA▲
—
—
—
U13ED60
U14ED60▲
U10ED60▲
U12ED60▲
U13ED62A▲
U14ED62A▲
U10ED62A▲
U12ED62A▲
U13ED62AB▲
U14ED62AB▲
U10ED62AB▲
—
U13ED62B▲
U14ED62B▲
U10ED62B▲
—
U13ED62AA▲
U14ED62AA▲
U10ED62AA▲
U12ED62AA▲
897.00
1157.00
897.00
1157.00
List Price $: 636.00
Auxiliary Switch Combinations
Maximum
Voltage
1 Auxiliary Switch
1 Alarm Switch and
1 Auxiliary Switch
AC
DC
Catalog Number
Catalog Number
Catalog Number
Catalog Number
240
250
A01ED62
A01ED62B
A02ED62
A02ED62B
2 Auxiliary Switches
1 Alarm Switch and
2 Auxiliary Switches
480
A01ED64
A01ED64B
—
—
List Price $:
271.00
540.00
540.00
802.00
Maximum
Voltage
1 Auxiliary Switch
AC
Catalog Number
List Price $
A01EDLV
342.00
DC
12
Gold Plated Contacts—for PLC use
Alarm Switch Only
Maximum
Voltage
1 Alarm Switch
AC
DC
Catalog Number
List Price $
240
250
B00ED62
271.00
B00ED64
271.00
480
Ground Fault Sensing Relay Kit — Equipment Protection Only
For Use With
Breaker Frame
CED6, ED2, ED4
ED6, EFC, EFF,
HED4, HHED6
Number of
Poles
Description
1, 2, 3
Catalog Number
30mA
5mA
List
Price $
Basic Kit
GF01ED60
GF01ED65
1483.00
Basic Kit with Normally
Open Bell Alarm
GF01ED60B0
GF01ED65B0▲
1734.00
Basic Kit with Normally
Closed Bell Alarm
GF01ED60BC
GF01ED65BC▲
1734.00
▲ Built to order. Allow 6–8 weeks for delivery.
6-36
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Accessories
Selection
Type FXD6-A
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker – Without Lugs)
2-Pole
Catalog
Number
FXD62B070■
FXD62B080■
FXD62B090■
FXD62B100
FXD62B110■
FXD62B125
FXD62B150
FXD62B175
FXD62B200
FXD62B225
FXD62B250
Continuous
Current Rating
@ 40°C
70
80
90
100
110
125
150
175
200
225
250
3-Pole
Catalog
Number
FXD63B070
FXD63B080
FXD63B090
FXD63B100
FXD63B110
FXD63B125
FXD63B150
FXD63B175
FXD63B200
FXD63B225
FXD63B250
List
Price $
1801.00
1801.00
1801.00
1801.00
1801.00
1801.00
1801.00
1801.00
1801.00
1801.00
3062.00
Type FD6-A
List
Price $
2276.00
2276.00
2276.00
2276.00
2276.00
2276.00
2276.00
2276.00
2276.00
2276.00
3572.00
Blue Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
Catalog
List
Number
Price $
Frame Only
Catalog
Number
Trip Unit Only
Catalog
List
Number
Price $
List
Price $
2-Pole 600V AC, 250V DC
70
80
90
100
110
125
150
175
200
225
250
FD62B070■
FD62B080■
FD62B090■
FD62B100■
FD62B110■
FD62B125■
FD62B150
FD62B175■
FD62B200
FD62B225■
FD62B250■
1896.00
1896.00
1896.00
1896.00
1896.00
1896.00
1896.00
1896.00
1896.00
1896.00
3158.00
FD62F250
869.00
FD63T070■
FD63T080■
FD63T090■
FD63T100
FD63T110■
FD63T125
FD63T150
FD63T175
FD63T200
FD63T225
FD63T250
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
2456.00
3-Pole 600V AC, 500V DC
70
80
90
100
110
125
150
175
200
225
250
FD63B070■
FD63B080■
FD63B090■
FD63B100
FD63B110■
FD63B125
FD63B150
FD63B175
FD63B200
FD63B225
FD63B250
2414.00
2414.00
2414.00
2414.00
2414.00
2414.00
2414.00
2414.00
2414.00
2414.00
3713.00
FD63F250
1125.00
Breaker
Type
FXD6-A, FD6-A
HFXD6 , HFD6
HHFD6 , HHFXD6
CFD6
65
100
200
200
35
65
100
200
22
25
25
100
30 (2-P)
30 (2-P)
—
50 (2-P)
18 (3-P)
25 (3-P)
—
50 (3-P)
IEC 947-2
Volts AC (50/60Hz)
220/240 380/415
lcu lcs lcu lcs
65 33
35
9
100
50
65 33
200 100 100 50
—
—
—
—
500
lcu
20
42
65
—
170-90
100-110
125-150
175-200
225-250
600
700
800
900
1100
640
770
900
1060
1300
690
840
1000
1210
1500
Wire
Range
List
Price $
#6—350 kcmil Cu
#4—350 kcmil Al
TC1FD350
#6—350 kcmil Cu
Compression Lug
CCF250
350 kcmil Cu/Al
22.00
34.50
51.00
Enclosures
Type
Catalog
Number
List
Price $
1
3R
4-4X
7-9
12
Neutral
F6N1S(F)
F6N3R
FD6SS4
EC2
F6N12
N250
184.00
606.00
4720.00
4815.00
410.00
143.00
lcs
10
21
33
—
Instantaneous Adjustment Trip Range
Nominal Instantaneous Values
+20%
Breaker Ampere Tolerance
Rating
Low
2
3
Catalog
Number
TA1FD350A
Interrupting Ratings
RMS Symmetrical Amperes (KA)
UL 489 AIR (File E10848)
Volts AC (50/60Hz)
Volts DC
240
480
600
250
500
Lugs For 75°C Wire
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-39 and 6-86 to 6-91
4
5
6
7
730
920
1100
1370
1700
770
990
1200
1520
1900
810
1060
1300
1780
2100
850
1140
1400
1930
2300
+20%
Tolerance
High
900
1200
1500
2000
2500
■ Built to order. Allow 2–3 weeks for delivery.
Type
FXD6-A circuit breakers are UL Listed for reverse
fed applications.
units are 3-pole width.
When wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
Order neutral as separate item.
See Note: A, page 6-81.
HFD6 and HHFD6 type circuit breakers meet the
UL criteria for “current limiting” at 240 and 480V AC.
HACR rated.
2-pole
Note: FD frame qualified to UL489 supplement SB “NAVAL”.
See page 6-84 for additional information.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-37
MOLDED CASE
CIRCUIT BREAKERS
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
2201.00
Complete Breaker Unassembled
with Lugs
Prices of FD6, HFD6, and HHFD6
breakers includes frame, trip and
both line and load lugs (TA1FD350A).
When ordered by these catalog
numbers, the customer will receive
the frame, trip, and lugs separately
packaged. For applications requiring
different lugs, order individual items
as needed.
Complete Breaker Assembled without Lugs
Prices of FXD6, HFXD6, HHFXD6,
and CFD6 includes frame with
non-interchangeable trip unit
installed only. Order required lugs
separately. For line and load lugs
(TA1FD350A) installed, add suffix
“L” to catalog number (add 2 times
list price of lugs for each pole).
50°C Applications see page 6-84.
400 Hz Applications see page 6-84.
6
FD62T070■
FD62T080■
FD62T090■
FD62T100■
FD62T110■
FD62T125■
FD62T150
FD62T175■
FD62T200
FD62T225■
FD62T250■
Ordering Information
Molded Case Circuit Breakers
FD 250A Frame Sentron Series
Selection/Dimensions
Type HFD6, Type HFXD6
Black Label
Interchangeable Trip
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Price $
Catalog
Number
D1
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
List
Price $
L
2-Pole 600V AC, 250V DC (3-Pole Width)
FD63T070■
FD63T080■
FD63T090■
FD63T100
FD63T110■
FD63T125
FD63T150
FD63T175
FD63T200
FD63T225
FD63T250
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
2456.00
HFD63B070■
HFD63B080■
HFD63B090■
HFD63B100
HFD63B110■
HFD63B125
HFD63B150
HFD63B175
HFD63B200
HFD63B225
HFD63B250
5053.00
5053.00
5053.00
5053.00
5053.00
5053.00
5053.00
5053.00
5053.00
5053.00
6352.00
HFD63F250
3764.00
Type HHFD, HHFXD6
6
HHFD63B070■
HHFD63B080■
HHFD63B090■
HHFD63B100
HHFD63B110■
HHFD63B125
HHFD63B150
HHFD63B175
HHFD63B200
HHFD63B225
HHFD63B250
MOLDED CASE
CIRCUIT BREAKERS
5866.00
5866.00
5866.00
5866.00
5866.00
5866.00
5866.00
5866.00
5866.00
5866.00
7165.00
Figure 1
Breaker
Type
Figure 1
FXD6-A, FD6-A,
HFD6, HFXD6,
HHFD6, FD6-ETI
Figure 2
CFD6,
CFD6-ETI
W
Figure 2
W
L
D
D1
(to
handle)
4.50
09.50
4
5.25
4.50
14.25
4
5.25
Shipping Weights
3-Pole 600V AC, Extra High Interrupting
070
080
090
100
110
125
150
175
200
225
250
W
Dimensions (in inches)
3-Pole 600V AC, 500V DC
070
080
090
100
110
125
150
175
200
225
250
L
3129.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
939.00
2201.00
D
HFD62F250
FD62T070■
FD62T080■
FD62T090■
FD62T100■
FD62T110■
FD62T125■
FD62T150■
FD62T175■
FD62T200■
FD62T225■
FD62T250■
4156.00
4156.00
4156.00
4156.00
4156.00
4156.00
4156.00
4156.00
4156.00
4156.00
5418.00
D
HFD62B070■
HFD62B080■
HFD62B090■
HFD62B100■
HFD62B110■
HFD62B125■
HFD62B150■
HFD62B175■
HFD62B200■
HFD62B225■
HFD62B250■
070
080
090
100
110
125
150
175
200
225
250
HHFD63F250
4577.00
Type CFD6
FD63T070■
FD63T080■
FD63T090■
FD63T100
FD63T110■
FD63T125
FD63T150
FD63T175
FD63T200
FD63T225
FD63T250
Number of
Number per
Shipping
Poles
Carton
Weight (lbs.)
FD6-A, HFD6, HHFD6, FXD6-A
Assembled Circuit Breaker (less connectors)
2
1
08.6
3
1
10
FD6-A, HFD6, HHFD6 Frame Only
2
1
07.5
3
1
08.7
FD6 Trip Unit Only
2
1
01.1
3
1
01.3
CFD6 Assembled Circuit Breaker (less terminals)
2
1
31
3
1
34
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
1157.00
2456.00
Red Label
Fuseless Current Limiting
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/500V DC
Catalog
Number
List
Price $
070
080
090
100
110
125
150
175
200
225
250
CFD63B070■
CFD63B080■
CFD63B090■
CFD63B100■
CFD63B110■
CFD63B125■
CFD63B150
CFD63B175
CFD63B200
CFD63B225
CFD63B250
6346.00
6346.00
6346.00
6346.00
6346.00
6346.00
6346.00
6346.00
6346.00
6346.00
7052.00
■ Built to order. Allow 2–3 weeks for delivery.
When wired as shown on page 6-3, this circuit breaker
is UL listed and rated for use on 500V DC ungrounded
UPS systems.
For non-interchangeable trip 3-pole HFD6 type circuit
6-38
breaker, change prefix identifier from HFD6 to HFXD6.
Price equals frame and trip prices combined, e.g. price
of HFXD63B250 equals price of HFD63F250 plus price of
FD63T250. Order lugs separately.
Type HFXD6, HHFXD6, CFD6 are UL Listed for reverse
feed applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Type HFXD6, HFD6, HHFD6, HHFXD6 meet the UL
criteria for “Current Limiting” at 240 VAC and 480V AC.
FXD6, ETI, CFD6, ETI — See page 6-66 for
ordering information.
HACR rated.
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Accessories:
for FD, FFC & FFF 250A Frames
Selection
Shunt Trip Combinations
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
S17FD60
S01FD60
S03FD60
S15FD60▲
S04FD60
S06FD60▲
636.00
636.00
636.00
636.00
636.00
636.00
S16FD60▲
S07FD60
S09FD60▲
S11FD60
S13FD60▲
636.00
636.00
636.00
636.00
636.00
DC
024
120
240
277
480
600
012
024
048
125
250
Undervoltage Trip Combinations
1 Undervoltage Trip and
1 Auxiliary Switch 햲
Control Voltage
1 Undervoltage Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
U01FD60
U02FD60▲
U03FD60
U16FD60▲
U06FD60▲
U08FD60▲
636.00
636.00
636.00
636.00
636.00
636.00
W01FD64
W02FD64▲
W03FD64▲
W16FD64▲
W06FD64▲
—
897.00
897.00
897.00
897.00
897.00
—
U13FD60
U14FD60▲
U10FD60▲
U12FD60▲
636.00
636.00
636.00
636.00
W13FD64
W14FD64▲
W10FD64▲
W12FD64▲
897.00
897.00
897.00
897.00
DC
120
208
240
277
480
600
024
048
125
250
Auxiliary Switch Combinations
6
1 Auxiliary Switch
Voltage
2 Auxiliary Switches
Catalog Number
List
Price $
240
A01FD62
271.00
A02FD62
540.00
480
A01FD64
271.00
A02FD64
540.00
A01FDLV
342.00
Gold Plated Contacts - for PLC use
AC
DC
12
MOLDED CASE
CIRCUIT BREAKERS
Catalog Number
List
Price $
Alarm Switch Combinations
Maximum
Voltage
1 Alarm Switch
1 Alarm Switch and
1 Auxiliary Switch
AC
DC
Catalog Number
List Price $
Catalog Number
List Price $
480
250
B00FD64
271.00
C01FD64
540.00
▲ Built to order. Allow 6–8 weeks for delivery.
햲 Auxiliary switch application is for 480V AC maximum.
Note: Old F-frame accessories cannot be used in new
Sentron line. Likewise, new FD-frame accessories
cannot be used on old F-frame circuit breakers.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-39
Molded Case Circuit Breakers
JD 400A Frame Sentron Series
Type
Selection
JXD2-A
Blue Label
240V AC , 2-Pole 250V DC Only
Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)
2-Pole (3-Pole Width)
Catalog
List
Number
Price $
JXD22B200■
2546.00
JXD22B225■
2546.00
JXD22B250■
2546.00
JXD22B300
2546.00
JXD22B350■
2546.00
JXD22B400
2546.00
Continuous
Current Rating
@ 40°C
200
225
250
300
350
400
3-Pole
List
Price $
3094.00
3094.00
3094.00
3094.00
3094.00
3094.00
Catalog
Number
JXD23B200
JXD23B225
JXD23B250
JXD23B300
JXD23B350
JXD23B400
Type JXD6-A
Blue
600V AC , 2-Pole 250V DC, 3-Pole 500V DC
Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)
JXD62B200■
JXD62B225■
JXD62B250■
JXD62B300
JXD62B350■
JXD62B400
200
225
250
300
350
400
3184.00
3184.00
3184.00
3184.00
3184.00
3184.00
JXD63B200
JXD63B225
JXD63B250
JXD63B300
JXD63B350
JXD63B400
Type JD6-A
Label
3764.00
3764.00
3764.00
3764.00
3764.00
3764.00
Blue Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
Catalog
List
Number
Price $
Frame Only
Catalog
Number
Trip Unit Only
Catalog
List
Number
Price $
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
6
2-Pole 600V AC, 250V DC (3-Pole Width)
JD62B200■
JD62B225■
JD62B250■
JD62B300■
JD62B350■
JD62B400
200
225
250
300
350
400
3309.00
3309.00
3309.00
3309.00
3309.00
3309.00
JD62F400
1324.00
JD62T200■
JD62T225■
JD62T250■
JD62T300■
JD62T350■
JD62T400
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
1694.00
JD63T200
JD63T225
JD63T250
JD63T300
JD63T350
JD63T400
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
3-Pole 600V AC, 500V DC
200
225
250
300
350
400
JD63B200
JD63B225
JD63B250
JD63B300
JD63B350
JD63B400
3953.00
3953.00
3953.00
3953.00
3953.00
3953.00
JD63F400
Interrupting Ratings
Breaker
Type
JXD2-A
JXD6-A, JD6-A
HJD6-A, HJXD6-A
HHJD6, HHJXD6
CJD6-A
RMS Symmetrical Amperes (KA)
UL 489 AIR (File E10848)
Volts AC
Volts DC
(50/60Hz)
240
065
065
100
200
200
480
—
035
065
100
150
600
—
025
035
050
100
250
30 (2-P)
30 (2-P)
30 (2-P)
—
50 (2-P)
500
—
25 (3-P)
35 (3-P)
—
50 (3-P)
Volts AC (50/60Hz)
220/240 380/415
500
lcu
—
065
100
200
—
lcu
—
30
42
65
—
lcs
—
033
050
100
—
lcu
—
040
065
100
—
Complete Breaker Unassembled
with Lugs
Prices of JD6, HJD6, and HHJD6
breakers include frame, trip and
both line and load lugs (TA2J6500).
When ordered by these catalog
numbers, the customer will receive
the frame, trip, and lugs separately
packaged. For applications
requiring different lugs, order
individual items as needed.
Complete Breaker Assembled without Lugs
Prices of JXD6, HJXD6, HHJXD6,
and CJD6 include frame with
non-interchangeable trip unit
installed only. Order required lugs
separately. For line and load lugs
(TA2J6500) installed, add suffix “L”
to catalog number (add 2 times list
price of lugs for each pole).
100% Rated
Types JXD6 and HJXD6 breakers
are available with 100% ratings.
To order add suffix “H” to catalog
number, and 10% to list price.■
100% rated JD breakers require the
use of 90° C Cu cable sized at 75° C
ampacity and lugs TC1J6600
or TC2J6500.
50° C Applications see page 6-84.
400Hz Applications see page 6-84.
Lugs For 75°C Wire
Cables
per
Lug
1, 2
2
TA1L6750 1
1
TC1J6600 1
TC2J6500 1, 2
Compression Lug
CCL600
1
Catalog
Number
TA2J6500
IEC 947-2
Ordering Information
lcs
—
20
33
50
—
lcs
—
15
21
33
—
Wire
Range
#3/0-500 kcmil Cu
#4/0-500 kcmil Al
500-750 kcmil Al
500-600 kcmil Cu
#3/0-600 kcmil Cu
#3/0-500 kcmil Cu
List
Price $
31.50
500 kcmil Cu/Al
150.00
76.00
77.00
76.00
Instantaneous Adjustment Trip Range
Breaker Ampere
Rating
200-300
350-400
Nominal Instantaneous Values
+20%
Tolerance
Low
2
3
4
5
6
7
1250
2000
1960
3140
2140
3430
2320
3710
1430
2290
1610
2570
■ Built to order. Allow 2–3 weeks for delivery.
Type
JXD2 and JXD6 circuit breakers are UL Listed for
reverse feed applications.
When wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded UPS
systems only.
6-40
1790
2860
+20%
Tolerance
High
2500
4000
See
Note: A, page 6-81.
type circuit breakers meet the UL criteria for
“current limiting” at 240 and 480V AC.
HACR rated.
Note: JD frame qualified to UL489 supplement B
“NAVAL.” See page 6-84 for additional information.
HHJD6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-43 and 6-86 to 6-91
Discount Schedule MCCB
Molded Case Circuit Breakers
JD 400A Frame Sentron Series
Selection/Dimensions
Black Label
Type HJD6-A, HJXD6-A
Interchangeable Trip
Complete Breaker
Unassembled with Lugs
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Price $
Catalog
Number
List
Price $
3441.00
JD62T200■
JD62T225■
JD62T250■
JD62T300■
JD62T350■
JD62T400
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
D1
Continuous
Current Rating
@ 40°C
L
2-Pole 600V AC, 250V DC (3-Pole Width)
3-Pole 600V AC, 500V DC
200
225
250
300
350
400
HJD63B200
HJD63B225
HJD63B250
HJD63B300
HJD63B350
HJD63B400
Type HHJD6,
6538.00
6538.00
6538.00
6538.00
6538.00
6538.00
HJD63F400
4279.00
HHJXD6
HHJD63B200
HHJD63B225
HHJD63B250
HHJD63B300
HHJD63B350
HHJD63B400
7841.00
7841.00
7841.00
7841.00
7841.00
7841.00
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
Black Label
HHJD62F400■
4538.00
JD62T200■
JD62T225■
JD62T250■
JD62T300■
JD62T350■
JD62T400
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
JD63T200
JD63T225
JD63T250
JD63T300
JD63T350
JD63T400
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
3-Pole 600VAC
200
225
250
300
350
400
HHJD63F400
5582.00
Type CJD6-A
Red Label
Fuseless Current Limiting
Non-Interchangeable Trip (Assembled Circuit Breakers Without Lugs)
Continuous
Current Rating
@ 40°C
200
225
250
300
350
400
2-Pole
3-Pole
600V AC/250V DC
600V AC/500V DC
For 2-pole application
use outside poles of
3-pole circuit breaker
Catalog
Number
List
Price $
CJD63B200■
CJD63B225■
CJD63B250■
CJD63B300■
CJD63B350■
CJD63B400
8167.00
8167.00
8167.00
8167.00
8167.00
8167.00
W
Figure 2
Dimensions (in inches)
D
To
Handle
D1
Figure 1
JXD2-A, JXD6-A, JD6-A
HJD6-A, HJXD6-A, HHJD6, 7.5 11
HJD6, HJXD6, HHJXD6,
JXD6-ETI , SJD6, SHJD6
4
5.44
Figure 2
CJD6, CJD6-ETI , SCJD6
4
5.44
Breaker
Type
W
L
7.5 17.86
Enclosures (Except SCJD6)
Type
Catalog
Number
List
Price $
1
3R
12
4X
7, 9 (200-250A)
7, 9 (300-400A)
J6N1
J6N3R
J6N12
LD6SS4
EC4
EE
258.00
1393.00
725.00
6946.00
4815.00
6662.00
Neutral
W60992
492.00
Shipping Weights
Number of
Number per
Shipping
Poles
Carton
Weight (lbs.)
JXD2, JXD6, JD6, HJD6, HHJD6
Assembled Breaker (less terminals)
2
1
17.5
3
1
19.5
JD6, HJD6, HHJD6 Frame Only
2
1
14
3
1
15.5
JD6 Trip Unit Only
2
1
03.5
3
1
04
CJD6 Complete Assembled Breaker
(less terminals)
2
1
29.5
3
1
31.5
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
2-pole units available in 3-pole construction.
When
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
Discount Schedule MCCB
For
non-interchangeable 3-pole HJD6 or HHJD6 type
circuit breaker change the prefix identifier to HJXD6
or HHJXD6. Price equals price of frame plus price of
trip, e.g. price of HJXD63B400 equals price of
HJD63F400 plus price of JD63T400. Order lugs
separately.
JXD6-ETI,
CJD6-ETI see page 6-66 for ordering information.
HJXD6, HHJXD6 Circuit Breakers are UL listed for
reverse fed applications.
CE applies to non-interchangeable type HJXD6-A only.
HACR rated.
Type
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-41
MOLDED CASE
CIRCUIT BREAKERS
6523.00
6523.00
6523.00
6523.00
6523.00
6523.00
6
HHJD62B200■
HHJD62B225■
HHJD62B250■
HHJD62B300■
HHJD62B350■
HHJD62B400■
Figure 1
JD63T200
JD63T225
JD63T250
JD63T300
JD63T350
JD63T400
2-Pole 600V AC (3-Pole Width)
200
225
250
300
350
400
W
D
HJD62F400■
L
5426.00
5426.00
5426.00
5426.00
5426.00
5426.00
D
HJD62B200■
HJD62B225■
HJD62B250■
HJD62B300■
HJD62B350■
HJD62B400■
200
225
250
300
350
400
Molded Case Circuit Breakers
SJD 400A Frame Digital Solid State Sentron Sensitrip III Series
Current Limiting
Type SJD6-A
Type SHJD6-A
Blue Label
3-Pole, 600V AC
Catalog
Number
SJD69200■
SJD69300■
SJD69400■
SJD69200G■
SJD69300G■
SJD69400G■
SJD69200NT■
SJD69300NT■
SJD69400NT■
SJD69200NGT■
SJD69300NGT■
SJD69400NGT■
Red Label
3-Pole, 600V AC
Max
Current List
Rating Price $
200
300
400
4564.00
4564.00
4564.00
200
300
400
7302.00
7302.00
7302.00
200
300
400
6200.00
6200.00
6200.00
200
300
400
9164.00
9164.00
9164.00
Ordering Information
Type SCJD6-A
Black Label
3-Pole, 600V AC
Max
Current List
Rating Price $
Catalog
Number
SHJD69200■
SHJD69300■
SHJD69400■
SHJD69200G■
SHJD69300G■
SHJD69400G■
SHJD69200NT■
SHJD69300NT■
SHJD69400NT■
SHJD69200NGT■
SHJD69300NGT■
SHJD69400NGT■
200
300
400
6500.00
6500.00
6500.00
200
300
400
9164.00
9164.00
9164.00
200
300
400
8048.00
8048.00
8048.00
200
300
400
11116.00
11116.00
11116.00
Max
Current List
Rating Price $
Catalog
Number
SCJD69200■
SCJD69300■
SCJD69400■
SCJD69200G■
SCJD69300G■
SCJD69400G■
SCJD69200NT■
SCJD69300NT■
SCJD69400NT■
SCJD69200NGT■
SCJD69300NGT■
SCJD69400NGT■
Selection
200
300
400
8649.00
8649.00
8649.00
200
300
400
11739.00
11739.00
11739.00
200
300
400
10389.00
10389.00
10389.00
200
300
400
14334.00
14334.00
14334.00
Pricing information for all Digital
Sentron Series SJD frames is for
complete breaker only – price
required lugs as separate items –
lugs are suitable for 75° C wire.
SJD6 and SCJD6 are acceptable for
reverse connection application.
SHJD6 are not acceptable for
reverse connection application.
Shipping Weights
Breaker
Type
Number per
Carton
Shipping
Weight (lbs)
SJD6-A
SHJD6-A
SCJD6-A
1
1
1
20
20
33
SJD 400A Frame – 100% Rated 햳
Type SJD6-A
Blue Label
6
MOLDED CASE
CIRCUIT BREAKERS
SJD69200H■
SJD69300H■
SJD69400H■
SJD69200GH■
SJD69300GH■
SJD69400GH■
SJD69200NTH■
SJD69300NTH■
SJD69400NTH■
SJD69200NGTH■
SJD69300NGTH■
SJD69400NGTH■
No of
Cables
Catalog
per ConNumber
nector
2
TA2J6500 2
1
TA1L6750 1
TC1J6600 1
TC2J6500 2
TA2J630 2
Compression Lug
CCL600
(1 pc.)
Black Label
3-Pole, 600V AC
Catalog
Number
Lugs for 75° C Wire 햲
Type SHJD6-A
3-Pole, 600V AC
Max
Current
Rating
Max
Current List
Rating Price $
List
Price $
Catalog
Number
200
300
400
5007.00
5007.00
5007.00
200
300
400
8048.00
8048.00
8048.00
200
300
400
6819.00
6819.00
6819.00
200
300
400
10071.00
10071.00
10071.00
SHJD69200H■
SHJD69300H■
SHJD69400H■
SHJD69200GH■
SHJD69300GH■
SHJD69400GH■
SHJD69200NTH■
SHJD69300NTH■
SHJD69400NTH■
SHJD69200NGTH■
SHJD69300NGTH■
SHJD69400NGTH■
200
300
400
7159.00
7159.00
7159.00
200
300
400
10088.00
10088.00
10088.00
200
300
400
8827.00
8827.00
8827.00
200
300
400
12238.00
12238.00
12238.00
Short
Time
Pick Up
Short
Time
Delay
Short
Time
l2t
Pick Up
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Trip
Type
Cont
Current
Setting
Long
Time
Delay
Instantaneous
Setting
None
LI
⻫
⻫
⻫
G
LIG
⻫
⻫
⻫
NT
LSI
⻫
⻫
NGT
LSIG
⻫
⻫
#1/0-500 kcmil Cu/Al 150.00
Neutral Transformers
Trip Unit Adjustable Functions
Suffix
Letter
Code
Wire
List
Range
Price $
#3/0-500 kcmil Cu
31.50
#4/0-500 kcmil Cu
31.50
500–750 kcmil Cu/Al 76.00
500–600 kcmil Cu
76.00
#3/0-600 kcmil Cu
77.00
#3/0-500 kcmil Cu
76.00
#4–#3/0-Cu/Al
32.50
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
⻫
⻫
Ampere
Rating
Catalog
Number
List
Price $
200
300
400
N02SJD
N03SJD
N04SJD
396.00
396.00
396.00
Interrupting Ratings
Breaker
Type
RMS Symmetrical kA UL 489 (File E10848)
240V AC
480V AC
600V AC
SJD6-A
SHJD6-A
SCJD6-A
065
100
200
035
065
150
025
035
100
Note: “G” suffix in catalog number denotes circuit
breaker for 3-phase, 3-wire systems.
For 3-phase, 4-wire, order correct 4th wire (neutral)
transformer as separate and additional item.
6-42
■ Built to order. Allow 2–3 weeks for delivery.
Enclosures Section 5
Accessories pages 6-43 and 6-86 to 6-91
햲 For
additional information, see Note: A, page 6-81.
to the NEC for proper app lication of 100%
rated devices.
햳 Refer
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
JD 400A Frame
LD 600A Frame
LMD 800A Frame
SJD 400A Frame
SLD 600A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S17JLD6
S18JLD6▲
S01JLD6
S03JLD6
S15JLD6▲
S04JLD6
636.00
636.00
636.00
636.00
636.00
636.00
—
—
S01JLD62A
S03JLD62A
S15JLD64A▲
—
—-—-897.00
897.00
897.00
—--
S16JLD6▲
S07JLD6
S09JLD6▲
S11JLD6
S13JLD6▲
636.00
636.00
636.00
636.00
636.00
S16JLD62A▲
S07JLD62A
S09JLD62A
S11JLD62A▲
S13JLD62A▲
897.00
897.00
897.00
897.00
897.00
DC
024
048
120
240
277
480
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
Sensitrip Ammeter
1 Undervoltage Trip and
1 Auxiliary Switch
1 Undervoltage Trip
DC
120
208
240
480
024
048
125
250
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
U01JLD6
U02JLD6▲
U03JLD6
U06JLD6
636.00
636.00
636.00
636.00
U01JLD62A
U02JLD62A▲
U03JLD62A▲
U06JLD64A▲
897.00
897.00
897.00
897.00
U01JLD62AA
U02JLD62AA▲
U03JLD62AA▲
U06JLD64AA▲
1157.00
1157.00
1157.00
1157.00
U13JLD6
U14JLD6▲
U10JLD6▲
U12JLD6▲
636.00
636.00
636.00
636.00
U13JLD62A
U14JLD62A▲
U10JLD62A▲
U12JLD62A▲
897.00
897.00
897.00
897.00
U13JLD62AA
U14JLD62AA▲
U10JLD62AA▲
U12JLD62AA▲
1157.00
1157.00
1157.00
1157.00
Auxiliary Switch Combinations
DC
Catalog Number
List Price $
Catalog Number
List Price $
480
250
A01JLD64
271.00
A02JLD64
540.00
—
12
A01JLDLV
342.00
A02JLDLV
684.00
Alarm Switch Combinations
Maximum
Voltage
Note: Accessory modules can only be added to right
side pole of solid state SJD and SLD frame circuit
breakers. No accessories can be added if
mechanical interlock is used. All accessories on this
page are useable on superseded JD2, JJ6, JL6, HJ6,
SJL, LJ6, LL6, HL6 and SLL circuit breakers.
Discount Schedule MCCB
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
480
250
B01JLD64
271.00
A01JLD64B
540.00
A02JLD64B
802.00
Plug-in Ammeter Display Units
Breaker Type
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
2 Form C
SJD, SLD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
▲ Built to order. Allow 6–8 weeks for delivery.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-43
MOLDED CASE
CIRCUIT BREAKERS
Ammeter Mounting Kit
1 Form C
AC
6
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
Maximum Voltage
Molded Case Circuit Breakers
LD 600A Frame Sentron Series
Selection
Type LXD6-A
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)
2-Pole (3-Pole
600V AC
Catalog
Number
LXD62B450■
LXD62B500■
LXD62B600
Continuous
Current Rating
@ 40°C
450
500
600
Width)
250V DC
List
Price $
4893.00
4893.00
4893.00
3-Pole
600V AC
Catalog
Number
LXD63B450
LXD63B500
LXD63B600
Type LD6-A
500V DC
List
Price $
6102.00
6102.00
6102.00
Blue Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled w/Lugs
Catalog
List
Number
Price $
Frame Only
Catalog
Number
List
Price $
Trip Unit Only
Catalog
List
Number
Price $
2-Pole 600V AC, 250V DC (3-Pole Width)
LD62B250■
LD62B300■
LD62B350■
LD62B400
LD62B450■
LD62B500■
LD62B600
250
300
350
400
450
500
600
5020.00
5020.00
5020.00
5020.00
5020.00
5020.00
5020.00
LD62F600
3035.00
JD62T250■
JD62T300■
JD62T350■
JD62T400
LD62T450■
LD62T500■
LD62T600
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
4031.00
JD63T250
JD63T300
JD63T350
JD63T400
LD63T450
LD63T500
LD63T600
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
3-Pole 600V AC, 500V DC
MOLDED CASE
CIRCUIT BREAKERS
6
250
300
350
400
450
500
600
LD63B250
LD63B300
LD63B350
LD63B400
LD63B450
LD63B500
LD63B600
6290.00
6290.00
6290.00
6290.00
6290.00
6290.00
6290.00
LD63F600
Interrupting Ratings
RMS Symmetrical Amperes (KA)
UL 489 AIR (File E10848)
Volts AC (50/60Hz)
Volts DC
Breaker
Type
240
LD6-A, LXD6-A
HLD6-A, HLXD6-A
HHLD6, HHLXD6
CLD6-A
065
100
200
200
480
035
065
100
150
600
025
035
050
100
250
IEC 947-2
Volts AC (50/60Hz)
500
220/240
(lcu) (lcs)
25 (3-P) 065 033
35 (3-P) 100 050
—
200 100
50 (3-P) —
—
30 (2-P)
30 (2-P)
—
—
Breaker Ampere
Rating
250-300
350-450
500-600
4
1790
2860
4290
5
1960
3140
4710
6
2140
3430
5140
380/415
(lcu) (lcs)
040 20
065 33
100 50
—
—
7
2320
3710
5570
Complete Breaker Unassembled
with Lugs
Prices of LD6, HLD6, and HHLD6
breakers include frame, trip, and
both line and load lugs (TA2J6500).
When ordered by these catalog
numbers, the customer will receive
the frame, trip and lugs separately
packaged. For applications requiring
different lugs, order individual items
as needed.
Complete Breaker Assembled without Lugs
Prices of LXD6, HLXD6, HHLXD6,
and CLD6 include frame with noninterchangeable trip unit installed
only. Order required lugs separately.
For line and load lugs (TA2J6500)
installed, add suffix “L” to catalog
number (add 2 times list price of
lugs for each pole).
100% Rated
Types LXD6 and HLXD6 breakers
are available with 100% ratings.
To order add suffix “H” to catalog
number, and 10% to list price. 100%
rated LD breakers require the use of
90°C Cu cable sized at 75°C
ampacity and lugs TC1J6600
or TC2J6500.
50°C Applications see page 6-84.
400Hz Applications see page 6-84.
Shipping Weights
500
(lcu)
30
42
65
—
(lcs)
15
21
33
—
Instantaneous Adjustment Trip Range
Nominal Instantaneous Values
+20%
Tolerance
Low
2
3
1250
1430
1610
2000
2290
2570
3000
3430
3800
Ordering Information
+20%
Tolerance
High
2500
4000
6000
Number of
Number per
Shipping
Poles
Carton
Weight (lbs.)
LXD6, LD6, HLD6, HHLD6
Assembled Breaker (less terminals)
2
1
17.5
3
1
19.5
LD6, HLD6, HHLD6 Frame Only
2
1
14
3
1
15.5
LD6, HHLD6 Trip Unit Only
2
1
03.5
3
1
04
CLD6 Complete Assembled Breaker
(less terminals)
2
3
1
1
29.5
31.5
Lugs For 75°C Wire
■ Built to order. Allow 2–3 weeks for delivery.
Type
LXD6A circuit breakers are UL Listed for reverse
fed applications.
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
See Note: A, page 6-81.
HACR rated.
Note: LD frame qualified to UL489 supplement SB “NAVAL”.
See page 6-84 for additional information.
When
6-44
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-47 and 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Cables
Catalog
per
Number
Lug
TA2J6500
1, 2
2
TC2J6500
2
TA1L6750
1
1
TC1J6600
1
Compression Lug
CCL600
1
Wire
Range
#3/0 500 kcmil Cu
#4/0 500 kcmil Al
#3/0-500 kcmil Cu
500-750 kcmil Al
500-600 kcmil Cu
#3/0-600 kcmil Cu
List
Price $
31.50
500 kcmil Cu/Al
150.00
76.00
76.00
77.00
Discount Schedule MCCB
Molded Case Circuit Breakers
LD 600A Frame Sentron Series
Selection/Dimensions
Type HLD6-A, HLXD6-A
Black Label
Interchangeable Trip
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Price $
Catalog
Number
List
Price $
D1
Complete Breaker
Unassembled w/Lugs
Continuous
Current Rating
@ 40°C
L
2-Pole 600V AC, 250V DC (3-Pole Width)
3-Pole 600V AC, 500V
250
300
350
400
450
500
600
HLD62F600■
4578.00
JD62T250■
JD62T300■
JD62T350■
JD62T400
LD62T450■
LD62T500■
LD62T600
HLD63F600
6090.00
JD63T250
JD63T300
JD63T350
JD63T400
LD63T450
LD63T500
LD63T600
8184.00
8184.00
8184.00
8184.00
8184.00
8184.00
8184.00
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
Black Label
HHLD62F600■
6199.00
JD62T250■
JD62T300■
JD62T350■
JD62T400
HHLD62T450■
HHLD62T500■
HHLD62T600■
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
W
D
Figure 2
Figure 1
Dimensions (in inches)
To
Handle
Breaker
Type
2-Pole 600V AC (3-Pole Width)
HHLD62B250■
HHLD62B300■
HHLD62B350■
HHLD62B400■
HHLD62B450■
HHLD62B500■
HHLD62B600■
W
8349.00
8349.00
8349.00
8349.00
8349.00
8349.00
8349.00
Type HHLD6, HHLXD6
W
Figure 1
LXD6-A, LD6-A
HLD6-A
HHLD6, HHLXD6,
LXD6–ETI, SLD6, SHLD6
Figure 2
CLD6,
CLD6-ETI, SCLD6
L
D
D1
7.5 11
4
5.44
7.5 17.86
4
5.44
9914.00
9914.00
9914.00
9914.00
9914.00
9914.00
9914.00
HHLD63F600
7655.00
JD63T250
JD63T300
JD63T350
JD63T400
HHLD63T450■
HHLD63T500■
HHLD63T600■
Type CLD6-A
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
2070.00
Type
Catalog
Number
List
Price $
1
3R
12
4X
7,9
LD6N1
LD6N3R
LD6N12
LD6SS4
ED6
449.00
1618.00
979.00
6946.00
11330.00
Neutral
W60993
436.00
Red Label
Fuseless Current Limiting
Non-Interchangeable Trip (Assembled Circuit Breaker)
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/250V DC
600V AC/500V DC
450
500
600
For 2-pole application
use outside poles of
3-pole circuit breaker
Catalog
Number
CLD63B450■
CLD63B500
CLD63B600
List
Price $
13045.00
13045.00
13045.00
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
Type
HLXD6, HHLXD6, & CLD6 Circuit Breakers are UL
Listed for reverse feed applications.
CLD6-ETI see page 6-66 for ordering information.
CE Applies to non-interchangeable type HLXD only.
HACR rated.
When
HHLD6 to HLXD6 or HHLXD6. Price is sum of frame and
trip units prices, e.g. price of HLXD63B400 is the price of
HLD63F600 plus the price of LD63T600. Order the
terminal connectors separately.■
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
For complete assembled 3-pole HLD6 or HHLD6 type
circuit breaker change the prefix identifier HLD6 or
LXD6-ETI,
6-45
MOLDED CASE
CIRCUIT BREAKERS
HHLD63B250
HHLD63B300
HHLD63B350
HHLD63B400
HHLD63B450■
HHLD63B500■
HHLD63B600■
6
Enclosures: (except SCLD6)
3-Pole 600V AC
250
300
350
400
450
500
600
L
DC
HLD63B250
HLD63B300
HLD63B350
HLD63B400
HLD63B450
HLD63B500
HLD63B600
250
300
350
400
450
500
600
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
1859.00
D
6563.00
6563.00
6563.00
6563.00
6563.00
6563.00
6563.00
HLD62B250■
HLD62B300■
HLD62B350■
HLD62B400■
HLD62B450■
HLD62B500■
HLD62B600■
250
300
350
400
450
500
600
Molded Case Circuit Breakers
SLD 600A Frame Digital Solid State Sentron Sensitrip III Series
Current Limiting
Type SLD6-A
Blue Label
Black Label
3-Pole, 600V AC
SLD69300■
SLD69400■
SLD69500■
SLD69600■
SLD69300G■
SLD69400G■
SLD69500G■
SLD69600G■
SLD69300NT■
SLD69400NT■
SLD69500NT■
SLD69600NT■
SLD69300NGT■
SLD69400NGT■
SLD69500NGT■
SLD69600NGT■
Red Label
3-Pole, 600V AC
3-Pole, 600V AC
Max
List
Current Price
Rating $
Catalog
Number
Max
List
Current Price
Rating $
Catalog
Number
300
400
500
600
6235.00
6235.00
6235.00
6235.00
300
400
500
600
8847.00
8847.00
8847.00
8847.00
300
400
500
600
7834.00
7834.00
7834.00
7834.00
300
400
500
600
10890.00
10890.00
10890.00
10890.00
SHLD69300■
SHLD69400■
SHLD69500■
SHLD69600■
SHLD69300G■
SHLD69400G■
SHLD69500G■
SHLD69600G■
SHLD69300NT■
SHLD69400NT■
SHLD69500NT■
SHLD69600NT■
SHLD69300NGT■
SHLD69400NGT■
SHLD69500NGT■
SHLD69600NGT■
Ordering Information
Type SCLD6-A
Type SHLD6-A
300
400
500
600
7593.00
7593.00
7593.00
7593.00
300
400
500
600
10706.00
10706.00
10706.00
10706.00
300
400
500
600
9401.00
9401.00
9401.00
9401.00
300
400
500
600
12989.00
12989.00
12989.00
12989.00
Max
List
Current Price
Rating $
Catalog
Number
SCLD69300■
SCLD69400■
SCLD69500■
SCLD69600■
SCLD69300G■
SCLD69400G■
SCLD69500G■
SCLD69600G■
SCLD69300NT■
SCLD69400NT■
SCLD69500NT■
SCLD69600NT■
SCLD69300NGT■
SCLD69400NGT■
SCLD69500NGT■
SCLD69600NGT■
300
400
500
600
13446.00
13446.00
13446.00
13446.00
300
400
500
600
17758.00
17758.00
17758.00
17758.00
300
400
500
600
15914.00
15914.00
15914.00
15914.00
300
400
500
600
20940.00
20940.00
20940.00
20940.00
6
MOLDED CASE
CIRCUIT BREAKERS
Pricing information for all Digital
Sentron Series SLD frames is for
complete breaker only – price
required lugs as separate items –
lugs are suitable for 75° C wire.
SLD6 and SCLD6 are suitable for
reverse connection application.
SHLD6 are not suitable for reverse
connection application.
Shipping Weights
Breaker
Type
Number per
Carton
Shipping
Weight (lbs)
SLD6-A
SHLD6-A
SCLD6-A
1
1
1
20
20
33
Neutral Transformers
Trip Unit Adjustable Functions
Suffix
Letter
Code
Selection
Short
Time
Pick Up
Short
Time
Delay
Short
Time
l2t
Pick Up
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Trip
Type
Cont
Current
Setting
Long
Time
Delay
Instantaneous
Setting
None
LI
⻫
⻫
⻫
G
LIG
⻫
⻫
⻫
NT
LSI
⻫
⻫
NGT
LSIG
⻫
⻫
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
⻫
⻫
Ampere
Rating
Catalog
Number
List
Price $
300
400
500
600
N03SJD
N04SJD
N05SLD
N06SLD
396.00
396.00
396.00
396.00
Interrupting Ratings
Breaker
Type
RMS Symmetrical kA UL 489 (File E10848)
240V AC
480V AC
600V AC
SLD6-A
SHLD6-A
SCLD6-A
065
100
200
035
065
150
025
035
100
Note: “G” suffix in catalog number denotes circuit
breaker for 3-phase, 3-wire circuits.
For 3-phase, 4-wire, order correct 4th wire (neutral)
transformer as separate and additional item.
6-46
For ordering information and terminal connectors see
page 6-44; for enclosures, see page 6-45.
■ Built to order. Allow 2–3 weeks for delivery.
100% Rated – Not available in SLD6 Frame.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
JD 400A Frame
LD 600A Frame
LMD 800A Frame
SJD 400A Frame
SLD 600A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S17JLD6
S18JLD6▲
S01JLD6
S03JLD6
S15JLD6▲
S04JLD6
636.00
636.00
636.00
636.00
636.00
636.00
—
—
S01JLD62A
S03JLD62A
S15JLD64A▲
—
—-—-897.00
897.00
897.00
—--
S16JLD6▲
S07JLD6
S09JLD6▲
S11JLD6
S13JLD6▲
636.00
636.00
636.00
636.00
636.00
S16JLD62A▲
S07JLD62A
S09JLD62A
S11JLD62A▲
S13JLD62A▲
897.00
897.00
897.00
897.00
897.00
DC
024
048
120
240
277
480
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
Sensitrip Ammeter
1 Undervoltage Trip and
1 Auxiliary Switch
1 Undervoltage Trip
DC
120
208
240
480
024
048
125
250
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
U01JLD6
U02JLD6▲
U03JLD6
U06JLD6
636.00
636.00
636.00
636.00
U01JLD62A
U02JLD62A▲
U03JLD62A▲
U06JLD64A▲
897.00
897.00
897.00
897.00
U01JLD62AA
U02JLD62AA▲
U03JLD62AA▲
U06JLD64AA▲
1157.00
1157.00
1157.00
1157.00
U13JLD6
U14JLD6▲
U10JLD6▲
U12JLD6▲
636.00
636.00
636.00
636.00
U13JLD62A
U14JLD62A▲
U10JLD62A▲
U12JLD62A▲
897.00
897.00
897.00
897.00
U13JLD62AA
U14JLD62AA▲
U10JLD62AA▲
U12JLD62AA▲
1157.00
1157.00
1157.00
1157.00
Auxiliary Switch Combinations
DC
Catalog Number
List Price $
Catalog Number
List Price $
480
250
A01JLD64
271.00
A02JLD64
540.00
—
12
A01JLDLV
342.00
A02JLDLV
684.00
Alarm Switch Combinations
Maximum
Voltage
Note: Accessory modules can only be added to right
side pole of solid state SJD and SLD frame circuit
breakers. No accessories can be added if
mechanical interlock is used. All accessories on this
page are useable on superseded JD2, JJ6, JL6, HJ6,
SJL, LJ6, LL6, HL6 and SLL circuit breakers.
Discount Schedule MCCB
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
480
250
B01JLD64
271.00
A01JLD64B
540.00
A02JLD64B
802.00
Plug-in Ammeter Display Units
Breaker Type
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
2 Form C
SJD, SLD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
▲ Built to order. Allow 6–8 weeks for delivery.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-47
MOLDED CASE
CIRCUIT BREAKERS
Ammeter Mounting Kit
1 Form C
AC
6
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
Maximum Voltage
Molded Case Circuit Breakers
LMD 800A Frame Sentron Series
Selection
Type LMXD6
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)
2-Pole (3-Pole Width)
Catalog
List
Number
Price $
—
—
LMXD62B600■ 6242.00
LMXD62B700■ 6242.00
LMXD62B800
6242.00
Continuous
Current Rating
@ 40°C
500
600
700
800
3-Pole
Catalog
Number
LMXD63B500■
LMXD63B600
LMXD63B700
LMXD63B800
List
Price $
7902.00
7902.00
7902.00
7902.00
Blue Label
Type LMD6
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled w/Lugs
Catalog
List
Number
Price $
Frame Only
Catalog
Number
List
Price $
Trip Unit Only
Catalog
Number
List
Price $
LMD62T500■
LMD62T600■
LMD62T700■
LMD62T800■
2987.00
2987.00
2987.00
2987.00
LMD63T500■
LMD63T600■
LMD63T700■
LMD63T800
3747.00
3747.00
3747.00
3747.00
2-Pole 600V AC, 250V DC (3-Pole Width)
LMD62B500■
LMD62B600■
LMD62B700■
LMD62B800■
500
600
700
800
6632.00
6632.00
6632.00
6632.00
LMD62F800■
3253.00
LMD63F800
4156.00
3-Pole 600V AC, 500V DC
LMD63B500■
LMD63B600■
LMD63B700■
LMD63B800
500
600
700
800
8491.00
8491.00
8491.00
8491.00
Instantaneous Adjustment Trip Range
500-600
700-800
Complete Breaker Unassembled
with Lugs
Prices of LMD6 and HLMD6 breakers
include frame, trip, and both line
and load lugs (TA3K500). These
catalog numbers include the frame,
trip and lugs separately packaged.
For applications requiring different
lugs, order individual items as
needed.
Complete Breaker Assembled
without Lugs
Prices of LMXD6 and HLMXD6
include frame with
non-interchangeable trip unit
installed only. Order required lugs
separately. For line and load lugs
(TA3K500) installed, add suffix “L”
to catalog number (add 2 times list
price of lugs for each pole).
50°C Applications see page 6-84.
400Hz Applications see page 6-84.
Shipping Weights
4
5
6
7
4290
4200
4710
4700
5140
6400
5570
7300
High +/- 20%
Tolerance
6000
8000
MOLDED CASE
CIRCUIT BREAKERS
6
Ampere Rating
Nominal Instantaneous Values
Low +/- 20% 2
3
Tolerance
3000
3430
3860
3200
3500
3700
Ordering Information
Number of
Poles
Number per
Carton
Shipping
Weight (lbs.)
LMD6, HLMD6, LMXD6, HLMXD6
Complete Breaker (less terminals)
2
3
1
1
53
61.5
LMD6, HLMD6 Frame Only
2
3
1
1
42.25
46
LMD6, HLMD6 Trip Unit Only
2
3
1
1
4.5
6.5
Lugs for 75°C Wire
Catalog
Number
TA2K500
TA3K500
TA2N750
■ Built to order. Allow 2–3 weeks for delivery.
LMXD6 circuit breakers are UL Listed for reverse
connected applications.
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500VDC ungrounded UPS
systems only.
See
Note: A, page 6-81.
rated.
HACR
Cables
per
Lug
1, 2
1-3
1, 2
Wire
Range
#1-500 kcmil Cu/Al
#1/0-500 kcmil Cu/Al
500-750 kcmil Cu/Al
List
Price $
71.00
98.00
101.00
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-50 and 6-81 to 6-91
When
6-48
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
LMD 800A Frame Sentron Series
Selection/Dimensions
Type HLMXD6
Black Label
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/250V DC
600V AC/500V DC
500
600
700
800
For 2-pole application use
outside poles of 3-pole
circuit breaker
Catalog
Number
List
Price $
HLMXD63B500■
HLMXD63B600■
HLMXD63B700■
HLMXD63B800
9564.00
9564.00
9564.00
9564.00
Type HLMD6
Black Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
D1
D
W
Complete Breaker
Unassembled
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Price $
Catalog
Number
List
Price $
HLMD62F800■
4526.00
LMD62T500■
LMD62T600■
LMD62T700■
LMD62T800■
2987.00
2987.00
2987.00
2987.00
HLMD63F800
5819.00
LMD63T500 ■
LMD63T600 ■
LMD63T700 ■
LMD63T800
3747.00
3747.00
3747.00
3747.00
2-Pole 600V AC, 250V DC (3-Pole Width)
500
600
700
800
HLMD62B500■
HLMD62B600■
HLMD62B700■
HLMD62B800■
7905.00
7905.00
7905.00
7905.00
L
3-Pole 600V AC, 500V DC
500
600
700
800
HLMD63B500
HLMD63B600
HLMD63B700
HLMD63B800
10154.00
10154.00
10154.00
10154.00
480
50
065
600
25
050
250
30 (2-P)
30 (2-P)
L
D
D1
7.5
16
4.5
5.93
500
500
(lcu) (lcs) (lcu) (lcs) (lcu) (lcs)
25 (3-P) 065 033 040 20 30 15
50 (3-P) 100 050 065 33 42 21
Enclosures
Type
Catalog
Number
List
Price $
1
3R
12
LMD1
LMD3R
LMD12■
897.00
2202.00
2883.00
Neutral
W63623
606.00
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
HLMXD6
circuit breakers are UL Listed for reverse
connection applications.
LMXD6-ETI, see page 6-66 for catalog information.
Discount Schedule MCCB
When wired as shown on page 6-3, this circuit breaker
is UL listed and rated for use on 500VDC ungrounded
UPS systems only.
HACR rated.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-49
MOLDED CASE
CIRCUIT BREAKERS
240
65
100
W
6
Breaker
Type
LMD6, LMXD6
HLMD6, HLMXD6
IEC 947-2
Volts AC (50/60HZ)
220/240 380/415
Breaker
Type
LMD6,
LMXD6,
HLMD6,
HLMXD6
LMXD6-ETI
Interrupting Ratings
UL 489A IR
RMS Symmetrical Amperes (KA)
Volts AC
Volts DC
Dimensions (in inches)
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
JD 400A Frame
LD 600A Frame
LMD 800A Frame
SJD 400A Frame
SLD 600A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S17JLD6
S18JLD6▲
S01JLD6
S03JLD6
S15JLD6▲
S04JLD6
636.00
636.00
636.00
636.00
636.00
636.00
—
—
S01JLD62A
S03JLD62A
S15JLD64A▲
—
—-—-897.00
897.00
897.00
—--
S16JLD6▲
S07JLD6
S09JLD6▲
S11JLD6
S13JLD6▲
636.00
636.00
636.00
636.00
636.00
S16JLD62A▲
S07JLD62A
S09JLD62A
S11JLD62A▲
S13JLD62A▲
897.00
897.00
897.00
897.00
897.00
DC
024
048
120
240
277
480
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
Sensitrip Ammeter
1 Undervoltage Trip and
1 Auxiliary Switch
1 Undervoltage Trip
DC
120
208
240
480
024
048
125
250
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
U01JLD6
U02JLD6▲
U03JLD6
U06JLD6
636.00
636.00
636.00
636.00
U01JLD62A
U02JLD62A▲
U03JLD62A▲
U06JLD64A▲
897.00
897.00
897.00
897.00
U01JLD62AA
U02JLD62AA▲
U03JLD62AA▲
U06JLD64AA▲
1157.00
1157.00
1157.00
1157.00
U13JLD6
U14JLD6▲
U10JLD6▲
U12JLD6▲
636.00
636.00
636.00
636.00
U13JLD62A
U14JLD62A▲
U10JLD62A▲
U12JLD62A▲
897.00
897.00
897.00
897.00
U13JLD62AA
U14JLD62AA▲
U10JLD62AA▲
U12JLD62AA▲
1157.00
1157.00
1157.00
1157.00
MOLDED CASE
CIRCUIT BREAKERS
6
Auxiliary Switch Combinations
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phrase current flowing in the
SADU breaker. They are powered by
the breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
Ammeter Mounting Kit
Maximum Voltage
1 Form C
AC
DC
Catalog Number
List Price $
Catalog Number
List Price $
480
250
A01JLD64
271.00
A02JLD64
540.00
—
12
A01JLDLV
342.00
A02JLDLV
684.00
Alarm Switch Combinations
Maximum
Voltage
Note: Accessory modules can only be added to right
side pole of solid state SJD and SLD frame circuit
breakers. No accessories can be added if
mechanical interlock is used. All accessories on this
page are useable on superseded JD2, JJ6, JL6, HJ6,
SJL, LJ6, LL6, HL6 and SLL circuit breakers.
6-50
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
480
250
B01JLD64
271.00
A01JLD64B
540.00
A02JLD64B
802.00
Plug-in Ammeter Display Units
Breaker Type
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
2 Form C
SJD, SLD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
▲ Built to order. Allow 6–8 weeks for delivery.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
MD 800A Frame Sentron Series
Selection
Type MXD6
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole
Continuous
Current Rating
@ 40°C
500
600
700
800
3-Pole
Catalog
Number
List
Price $
Catalog
Number
List
Price $
MXD62B500■
MXD62B600■
MXD62B700■
MXD62B800■
6242.00
6242.00
6242.00
6242.00
MXD63B500■
MXD63B600
MXD63B700
MXD63B800
7902.00
7902.00
7902.00
7902.00
Type MD6
Blue Label
Interchangeable Trip
Continuous
Current Setting
@ 40°C
Complete Breaker
Unassembled with Lugs
Frame Only
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
6632.00
6632.00
6632.00
6632.00
MD62F800■
3253.00
MD62T500■
MD62T600■
MD62T700■
MD62T800■
2987.00
2987.00
2987.00
2987.00
8491.00
8491.00
8491.00
8491.00
MD63F800
4156.00
MD63T500
MD63T600
MD63T700
MD63T800
3747.00
3747.00
3747.00
3747.00
Trip Unit Only
2-Pole 600V AC, 250V DC
500
600
700
800
MD62B500■
MD62B600■
MD62B700■
MD62B800■
3-Pole 600V AC, 500V DC
500
600
700
800
MD63B500
MD63B600
MD63B700
MD63B800
Lugs
Lugs
Per Kit
Wire
Range
List
Price $
TA2K500
TA3K500
TC2K500
TC3K350
1-2
1-3
1-2
1-3
1
1
1
1
#1-500 kcmil Cu / Al
1/0-500 kcmil Cu / Al
#1-500 kcmil Cu
#1-350 kcmil Cu
71.00
98.00
120.00
151.00
2TA2N8750
3TA2N8750
1-2
2
3
500-750 kcmil Cu / Al
365.00
513.00
2TA3N8750
3TA3N8750
1-3
2
3
500-750 kcmil Cu / Al
579.00
832.00
2TA4N8500
3TA4N8500
1-4
2
3
250-500 kcmil Cu / Al
588.00
853.00
2TA4P8500
3TA4P8500
1-4
2
3
250-500 kcmil Cu/Al
584.00
843.00
Kits
Instantaneous Adjustment Trip Range
Ampere
Rating
500–600
700–800
Nominal Instantaneous Values
Low +/- 20% 2
3
Tolerance
3000
3430
3860
4000
4570
5140
Shipping Weights
Number of
Number per
Poles
Carton
MD6, HMD6, HMXD6, CMD6
Complete Breaker Assembled
(less lugs)
2
1
3
1
Shipping
Weight (lbs.)
53
61.5
MD6, HMD6 Frame Only
4
5
6
7
4280
5710
4710
6280
5140
6850
5570
7420
High +/- 20%
Tolerance
6000
8000
2
3
1
1
42.25
46
MD6, HMD6 Trip Unit Only
2
3
1
1
4.5
6.5
Enclosures
■ Built to order. Allow 2–3 weeks for delivery.
MXD6
circuit breakers are UL Listed for reverse
connection applications.
2-pole units available in 3-pole width only.
When wired as shown on page 6-3, this circuit breaker
is UL listed and rated for use on 500V DC ungrounded
UPS systems.
Discount Schedule MCCB
See
Note: A, page 6-81.
rated breakers with the CE mark will also be
marked in the 100% rated version.
HACR rated.
Note: MD frame qualified to UL489 supplement B “NAVAL”.
See page 6-84 for additional information.
Type
Catalog
Number
List
Price $
1
3R
12
MND61
MND63
MND612■
897.00
2202.00
2883.00
Neutral
W63623
606.00
80%
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-54 and 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-51
MOLDED CASE
CIRCUIT BREAKERS
Cables
Per Lug
Complete Breaker Unassembled
with Lugs
Pricing information for MD6 and
HMD6 breakers includes frame, trip,
and both line and load lugs
(TA3K500). When ordered by these
catalog numbers, the customer will
receive the frame, trip and lugs
separately packaged. For
applications requiring different lugs,
order individual items as needed.
Complete Breaker Assembled without Lugs
Prices of MXD6, HMXD6 and
CMD6 include frame with
non-interchangeable trip units
installed only. Order required lugs
separately. For line and load lugs
(TA3K500) installed, add suffix “L”
to catalog number (add 2 times list
price of lugs for each pole).
100% Rated
Types MXD6, HMXD6 and CMD6
breakers are available with 100%
ratings. To order add suffix “H” to
catalog number, and 10% to list
price. 100% rated MD breakers
require the use of 90°C Cu cable
sized at 75°C ampacity and lugs
2TA4P8500 or 2TA2N8750 for
2-pole; 3TA4P8500 or 3TA2N8750
for 3-pole.
50°C Applications see page 6-84.
400Hz Applications see page 6-84.
6
Catalog
Number
Ordering Information
Molded Case Circuit Breakers
MD 800A Frame Sentron Series
Selection/Dimensions
Type HMXD6
Black Label
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/250V DC
600V AC/500V DC
500
600
700
800
For 2-pole application use
outside poles of 3-pole
circuit breaker
Catalog
Number
List
Price $
HMXD63B500■
HMXD63B600■
HMXD63B700■
HMXD63B800
9567.00
9567.00
9567.00
9567.00
Type HMD6
Black Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
Frame Only
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
7905.00
7905.00
7905.00
7905.00
HMD62F800■
4526.00
MD62T500■
MD62T600■
MD62T700■
MD62T800■
2987.00
2987.00
2987.00
2987.00
HMD63F800
5819.00
MD63T500
MD63T600
MD63T700
MD63T800
3747.00
3747.00
3747.00
3747.00
Trip Unit Only
2-Pole 600V AC, 250V DC
HMD62B500■
HMD62B600■
HMD62B700■
HMD62B800■
500
600
700
800
3-Pole 600V AC, 500V DC
500
600
700
800
HMD63B500
HMD63B600
HMD63B700
HMD63B800
10154.00
10154.00
10154.00
10154.00
MOLDED CASE
CIRCUIT BREAKERS
6
Type CMD6
Red Label
Fuseless Current Limiting
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/250V DC
600V AC/500V DC
500
600
700
800
For 2-pole application use
outside poles of 3-pole
circuit breaker
Lug
Catalog
Number
List
Price $
CMD63B500■
CMD63B600■
CMD63B700■
CMD63B800■
14089.00
14089.00
14089.00
14089.00
Interrupting Ratings
HMD6, HMXD6
CMD6
Dimensions (in inches)
W
L
D
(To
Handle)
D1
MD6, MXD6, HMD6,
HMXD6, CMD6,
MXD6-ETI, CMD6-ETI,
SMD6, SHMD6, and
SCMD6
9
16
6
8.25
with lug shields
9
24
6
8.25
Breaker
Type
UL 489 AIR—File E10848
RMS Symmetrical Amperes (KA)
Volts AC
Volts DC
Breaker
Type
MD6, MXD6
When wire lug shield NDTS is used.
Note: NDTS lug shields are required when oversized lugs
are used. The kits include the NDTS shield.
IEC 947-2 AIR
Volts AC (50/60HZ)
220/240 380/415 500
240
065
480
050
600
25
250
30 (2-P)
500
(lcu) (lcs) (lcu) (lcs) (lcu) (lcs
25 (3-P) 065 033 040 20 30 15
100
200
065
100
50
65
30 (2-P)
—
50 (3-P) 100 050 065 33
50 (3-P) 200 100 100 50
42
65
21
33
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
HMXD6
and CMD circuit breakers are UL listed for
reverse connection applications.
2-pole units available in 3-pole width only.
MXD6-ETI, CMD6-ETI see page 6-66 for catalog information.
6-52
When
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded UPS
systems only.
HACR rated.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
SMD 800A Frame Digital Solid State Sentron Sensitrip III Series햴
Current Limiting
Type SMD6
Blue Label
Black Label
Red Label
3-Pole, 600V AC
3-Pole, 600V AC
3-Pole, 600V AC
Ordering Information
Type SCMD6
Type SHMD6
Catalog
Number
Max
Current List
Rating Price $
Catalog
Number
Max
Current List
Rating Price $
Catalog
Number
Max
Current List
Rating Price $
SMD69600A■
SMD69700A■
SMD69800A■
600
700
800
8595.00
8595.00
8595.00
SHMD69600A■
SHMD69700A■
SHMD69800A■
600
700
800
10478.00
10478.00
10478.00
SCMD69600A■
SCMD69700A■
SCMD69800A■
600
700
800
15559.00
15559.00
15559.00
SMD69600AG■
SMD69700AG■
SMD69800AG■
600
700
800
10214.00
10214.00
10214.00
SHMD69600AG■
SHMD69700AG■
SHMD69800AG■
600
700
800
12060.00
12060.00
12060.00
SCMD69600AG■
SCMD69700AG■
SCMD69800AG■
600
700
800
18543.00
18543.00
18543.00
SMD69600ANT■
SMD69700ANT■
SMD69800ANT■
600
700
800
8896.00
8896.00
8896.00
SHMD69600ANT■
SHMD69700ANT■
SHMD69800ANT■
600
700
800
10800.00
10800.00
10800.00
SCMD69600ANT■
SCMD69700ANT■
SCMD69800ANT■
600
700
800
16837.00
16837.00
16837.00
SMD69600ANGT■ 600
SMD69700ANGT■ 700
SMD69800ANGT■ 800
11825.00
11825.00
11825.00
SHMD69600ANGT■ 600
SHMD69700ANGT■ 700
SHMD69800ANGT■ 800
13886.00
13886.00
13886.00
SCMD69600ANGT■ 600
SCMD69700ANGT■ 700
SCMD69800ANGT■ 800
21472.00
21472.00
21472.00
Current Limiting
Type SMD6-H
Type SCMD6-H
Type SHMD6-H
Black Label
3-Pole, 600V AC
Red Label
3-Pole, 600V AC
Max
Current List
Rating Price $
Catalog
Number
Max
Current List
Rating Price $
SMD69600AH■
SMD69700AH■
SMD69800AH■
600
700
800
9451.00
9451.00
9451.00
SHMD69600AH■
SHMD69700AH■
SHMD69800AH■
600
700
800
11529.00
11529.00
11529.00
SCMD69600AH■
SCMD69700AH■
SCMD69800AH■
600
700
800
17114.00
17114.00
17114.00
SMD69600AGH■
SMD69700AGH■
SMD69800AGH■
600
700
800
11249.00
11249.00
11249.00
SHMD69600AGH■
SHMD69700AGH■
SHMD69800AGH■
600
700
800
13269.00
13269.00
13269.00
SCMD69600AGH■
SCMD69700AGH■
SCMD69800AGH■
600
700
800
20408.00
20408.00
20408.00
SMD69600ANTH■
SMD69700ANTH■
SMD69800ANTH■
600
700
800
9861.00
9861.00
9861.00
SHMD69600ANTH■ 600
SHMD69700ANTH■ 700
SHMD69800ANTH■ 800
11900.00
11900.00
11900.00
SCMD69600ANTH■
SCMD69700ANTH■
SCMD69800ANTH■
600
700
800
18506.00
18506.00
18506.00
SMD69600ANGTH■ 600
SMD69700ANGTH■ 700
SMD69800ANGTH■ 800
13024.00
13024.00
13024.00
SHMD69600ANGTH■ 600
SHMD69700ANGTH■ 700
SHMD69800ANGTH■ 800
15291.00
15291.00
15291.00
SCMD69600ANGTH■ 600
SCMD69700ANGTH■ 700
SCMD69800ANGTH■ 800
23639.00
23639.00
23639.00
MD
MD
500–600
700–800
TA2K500
TA3K500
Types SMD6 and SHMD6 are acceptable for
reverse connection applications.
Breaker
Type
Number per
Carton
Shipping
Weight (lbs)
All types
1
61.5
Cables
Catalog
per
Wire
List
Number
Lug
Range
Price $
TA2K500
2
#1-500 kcmil Cu/Al
71.00
TA3K500
3
#1-500 kcmil Cu/Al
98.00
TC2K500
2
#1-500 kcmil Cu
120.00
TC3K350
3
#1-350 kcmil Cu
151.00
Kits (3 lugs/kit)
3TA4N8500
4
250–500 kcmil Cu/Al 853.00
3TA4P8500
4
250–500 kcmil Cu/Al 843.00
3TA2N8750
2
500–750 kcmil Cu/Al 513.00
3TA3N8750
3
500–750 kcmil Cu/Al 832.00
Each kit contains the following:
3TA4P8500—3 connectors plus 1 NDTS end barrier
3TA3N8750—3 connectors plus 1 NDTS end barrier
3TA2N8750—3 connectors plus 1 NDTS end barrier
Neutral Transformers
Trip Unit Adjustable Functions
Trip
Type
Cont
Current
Setting
Long
Time
Delay
Instantaneous
Setting
LI
⻫
⻫
⻫
AG
LIG
⻫
⻫
⻫
ANT
LSI
⻫
⻫
ANGT
LSIG
⻫
⻫
Short
Time
Pick Up
Short
Time
Delay
⻫
⻫
⻫
⻫
⻫
⻫
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
⻫
⻫
Interrupting Ratings
Breaker
Type
RMS Symmetrical kA UL 489 (File E10848)
240V AC
480V AC
600V AC
SMD6
SHMD6
SCMD6
065
100
200
050
065
100
25
50
65
Note: “G” suffix in catalog number denotes circuit
breaker for 3-phase, 3-wire circuits.
For 3-phase, 4-wire, order correct 4th wire (neutral)
transformer as separate and additional item.
Discount Schedule MCCB
Connector or
Connector Kit
햲 Use
2-3TA4P8500 for 3-pole. These kits are rated for
90°C wire. 90°C Cu only cable must be used, and sized
per 75°C ampacity.
햳 For additional information, see Note: A, page 6-81.
햴 SMD6, SHMD6 and SCMD6 circuit breakers are UL
Listed for reverse connection applications.
Ampere
Rating
Catalog
Number
List
Price $
0600
0700
0800
N06SMDA
N07SMDA
N08SMDA
423.00
423.00
423.00
Type
Catalog
Number
List
Price $
1
3R
12
MND61
MND63
MND612
897.00
2202.00
2883.00
Neutral
W63623
606.00
Enclosures
Enclosures Section 5
Accessories pages 6-54 and 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-53
MOLDED CASE
CIRCUIT BREAKERS
Catalog
Number
■ Built to order. Allow 2–3 weeks for delivery.
Ampere
Rating
6
Max
Current List
Rating Price $
A
Breaker
Frame
Lugs for 75°C Wire 햳
3-Pole, 600V AC
Catalog
Number
Suffix
Letter
Code
Pricing information for all Digital
Sentron Series MD frames is for complete breaker only. Price requires lugs or
lug kits as separate items. Lugs are suitable for 75°C wire or as noted.
Connector wire ranges and cavities are
established in conjunction with Table 8.1
of UL 489 standards. Choose actual connector for circuit breakers based on customer requirements.
Recommended Terminal Connectors
Shipping Weights
SMD 800A Frame – 100% Rated 햲
Blue Label
Selection
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
MD/SMD 800A Frame
ND/SND 1200A Frame
PD/SPD 1600A Frame
RD 2000A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S01MN6
S02MN6▲
S03MN6
S15MN6▲
S04MN6▲
S06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
S01MN64A
—
S03MN64A▲
S15MN64A▲
S04MN64A▲
—
897.00
—
897.00
897.00
897.00
—
S16MN6▲
S07MN6
S09MN6▲
S11MN6
S13MN6▲
636.00
636.00
636.00
636.00
636.00
S16MN64A▲
S07MN64A
—
S11MN64A▲
S13MN64A▲
897.00
897.00
—
897.00
636.00
DC
120
208
240
277
480
600
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
DC
Catalog Number
120
208
240
277
480
600
024
048
125
250
List Price $
1 Undervoltage Trip and
1 Auxiliary Switch
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
U01MN6
U02MN6▲
U03MN6▲
U15MN6▲
U04MN6▲
U06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
U01MN64A
U02MN64A▲
U03MN64A▲
U15MN64A▲
U04MN64A▲
—
897.00
897.00
897.00
897.00
897.00
—--
U01MN64AA
U02MN64AA▲
U03MN64AA▲
U15MN64AA▲
U04MN64AA▲
—
1157.00
1157.00
1157.00
1157.00
1157.00
—---
U07MN6
U09MN6▲
U11MN6▲
U13MN6▲
636.00
636.00
636.00
636.00
U07MN64A
U09MN64A▲
U11MN64A▲
U13MN64A▲
897.00
897.00
897.00
897.00
U07MN64AA
U09MN64AA▲
U11MN64AA▲
U13MN64AA▲
1157.00
1157.00
1157.00
1157.00
Maximum Voltage
1 Form C
6
Auxiliary Switch Combinations
AC
DC
Catalog Number
List Price $
Catalog Number
480
250
A01MN64
271.00
A02MN64
540.00
MOLDED CASE
CIRCUIT BREAKERS
Accessory modules can mount in either
left hand or right hand poles of all circuit
breakers, including solid state. Exception:
when mechanical interlock is used.
Accessories cannot be mounted in left
pole.
1 Undervoltage Trip
—
12
A01MNDLV▲
342.00
A02MNDLV▲
684.00
Sensitrip Ammeter
2 Form C
List Price $
Alarm Switch Combinations
Maximum
Voltage
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog Number List Price $ Catalog Number
List Price $ Catalog Number List Price $
480
250
B00MN64
540.00
271.00
A01MN64B
A02MN64B
802.00
Plug-in Ammeter Display Units
Breaker Type
SMD, SND, SPD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
Ammeter Mounting Kit
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
▲ Built to order. Allow 6–8 weeks for delivery.
6-54
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
ND 1200A Frame Sentron Series
Selection
Type NXD6 햲햹
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole 600V AC
250V DC
Continuous
Current Rating
@ 40°C
3-Pole 600V AC
500V DC
Catalog
Number
List
Price $
NXD62B900■
NXD62B100■
NXD62B120■
0900
1000
1200
Catalog
Number
10498.00
10498.00
10498.00
List
Price $
NXD63B900
NXD63B100
NXD63B120
Type ND6 햹
13167.00
13167.00
13167.00
Blue Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Catalog
Number
List
Price $
9587.00
11675.00
11675.00
11675.00
ND62F120
5424.00
MD62T800■
ND62T900■
ND62T100■
ND62T120
2987.00
5075.00
5075.00
5075.00
12259.00
14874.00
14874.00
14874.00
ND63F120
6806.00
MD63T800
ND63T900
ND63T100
ND63T120
3747.00
6362.00
6362.00
6362.00
List
Price $
Trip Unit Only
2-Pole 600V AC, 250V DC 햳
0800
0900
1000
1200
ND62B800■
ND62B900■
ND62B100■
ND62B120
3-Pole 600V AC, 500V DC 햴
0800
0900
1000
1200
ND63B800
ND63B900
ND63B100
ND63B120
Interrupting Ratings
240
480
600
250
500 햴
65
100
200
50
65
100
25
50
65
30 (2-P)
30 (2-P)
—
25 (3-P)
50 (3-P)
50 (3-P)
220/240
380/415
(lcu) (lcs) (lcu) (lcs)
65
33
40 20
100
50
65 33
200 100 100 50
500
(lcu)
30
42
65
(lcs)
15
21
33
Instantaneous Adjustment Trip Range
Nominal Instantaneous Values
Breaker Ampere
Rating
+20%
Tolerance
Low
2
3
4
5
6
7
+20%
Tolerance
High
800
4000
4570
5140
5710
6280
6850
7420
08000
900-1200
5000
5715
6430
7145
7860
8575
9290
10000
Lugs 햷
Catalog
Cables Wire
Number
per Lug Range
TA2K500
2
#1-500 kcmil Cu/Al
TA3K500
3
#1-500 kcmil Cu/Al
TC2K500
2
#1-500 kcmil Cu
TC3K350
3
#1-350 kcmil Cu
Kits (2 Kits required per breaker)
2TA4P8500 햵 4
250-500 kcmil Cu/Al
3TA4P8500 햵
2TA4N8500 햶 4
250-500 kcmil Cu/Al
3TA4N8500 햶
2TA2N8750 2
500-750 kcmil Cu/Al
3TA2N8750
2TA3N8750 3
500-750 kcmil Cu/Al
3TA3N8750
List
Price $
71.00
98.00
120.00
151.00
584.00
843.00
588.00
853.00
365.00
513.00
579.00
832.00
Enclosures
Type
1
3R
12
Neutral
■ Built to order. Allow 2–3 weeks for delivery.
햲 NXD6
circuit breakers are UL listed for reverse
connection applications.
햳 2-pole units available in 3-pole width only.
햴 When wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500VDC ungrounded UPS
systems only.
햵 Use 2 – 3TA4P8500 kits for 3-pole, or 2 – 2TA4P8500
kits for 2-pole. Use for 100% rated breakers.
Discount Schedule MCCB
Catalog
Number
MND61
MND63
MND612 ■
W63623
List
Price $
897.00
2202.00
2883.00
606.00
햶 Use
2 – 3TA4N8500 for 3-pole or 2 – 2TA4N8500 for
2-pole. Rated for 75°C cable.
Note: A, page 6-81.
햸 80% rated breakers with the CE mark will also be
marked in the 100% rated version.
햹 HACR rated.
Note: ND frame qualified to UL489 supplement B “NAVAL”.
See page 6-84 for additional information.
햷 See
Modifications page 6-84
Enclosures Section 5
Accessories pages 6-58 and 6-86 to 6-91
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-55
MOLDED CASE
CIRCUIT BREAKERS
ND6, NXD6
HND6, HNXD6
CND6
IEC 947-2
Volts AC (50/60HZ)
Complete Breaker Unassembled
with Lugs
Prices of ND6 and HND6 breakers
include frame, trip, and both line and
load lugs (3TA4N8500). These catalog
numbers are the frame, trip and lugs
separately packaged. For applications
requiring different lugs, order
individual items as needed.
Complete Breaker Assembled
without Lugs
Prices of NXD6, HNXD6, and
CND6 include frame with
non-interchangeable trip units
installed only. Order required
terminal connectors separately.
For line and load lugs (3TA4N8500)
installed, add suffix “L” to catalog
number (add 2 times list price of
lug kit).
100% Rated햸
Types NXD6, HNXD6 and CND6
breakers are available with 100%
ratings. To order, add suffix “H” to
catalog number, and add 10% to
list price. 100% rated ND breakers
require 90°C Cu cable sized at 75°C
ampacity and lug kit 3TA4P8500
or 3TA3N8750.
50°C Applications see page 6-84.
400Hz Applications see page 6-84.
6
Breaker
Type
RMS Symmetrical Amperes (KA)
UL 489 A IR
Volts AC
Volts DC
Ordering Information
Molded Case Circuit Breakers
ND 1200A Frame Sentron Series
Selection/Dimensions
Type HNXD6
Black Label
Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)
2-Pole
3-Pole
Continuous
Current Rating
@ 40°C
600V AC/250V DC
600V AC/500V DC
0900
1000
1200
For 2-pole application use outside
poles of 3-pole circuit breaker
Catalog
Number
List
Price $
HNXD63B900
HNXD63B100
HNXD63B120
14794.00
14794.00
14794.00
Type HND6
Black Label
Interchangeable Trip
Continuous
Current Rating
@ 40°C
Complete Breaker
Unassembled with Lugs
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Price $
Catalog
Number
List
Price $
2-Pole 600V AC, 250V DC
0800
0900
1000
1200
For 2-pole application use outside poles of 3-pole circuit breaker
3-Pole 600V AC, 500V DC
0800
0900
1000
1200
HND63B800
HND63B900
HND63B100
HND63B120
13883.00
16498.00
16498.00
16498.00
HND63F120
8430.00
MD63T800
ND63T900
ND63T100
ND63T120
MOLDED CASE
CIRCUIT BREAKERS
6
Type CND6
3747.00
6362.00
6362.00
6362.00
Red Label
Fuseless Current Limiting
Non-Interchangeable Trip (Assembled Circuit Breaker)
Continuous
Current Rating
@ 40°C
0900
1000
1200
2-Pole
Catalog
Number
For 2-pole application,
use outside poles of
3-pole circuit breaker
Lugs
3-Pole
CND63B900■
CND63B100
CND63B120
List
Price $
20489.00
20489.00
20489.00
Shipping Weights
When lugs shield NDTS is used.
Note: NDTS lug shields are required when oversized lugs
TA4P8500 or TA4N8500 are used. The kits include
the NDTS shield.
Dimensions (in inches)
Number of
Number per
Shipping
Poles
Carton
Weight (lbs.)
ND6, HND6, NXD6, HNXD6, CND6
Assembled Breaker (less terminals)
2
1
53
3
1
61.5
ND6, HND6 Frame Only
2
1
42.25
3
1
46
ND6, HND6 Trip Unit Only
2
1
04.5
3
1
06.5
Breaker
Type
W
L
D
D1
ND6, NXD6, HND6,
HNXD6, CND6,
SND6, SHND6, and
SCND6
9
16
6
8.25
with NDTS
lug shield
9
24
6
8.25
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
HNXD6
and CND6 circuit breakers are UL Listed for
reverse connection applications.
2-pole units available in 3-pole width only.
6-56
When
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
HACR rated.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
SND 1200A Frame Digital Solid State Sentron Sensitrip III Series햳
Selection
Current Limiting
Type SND6
Type SCND6
Type SHND6
Blue Label
Black Label
Red Label
3-Pole, 600V AC
3-Pole, 600V AC
3-Pole, 600V AC
Catalog
Number
Max
List
Current Price
Rating $
Catalog
Number
Max
List
Current Price
Rating $
Catalog
Number
Max
List
Current Price
Rating $
SND69800A■
SND69100A■
SND69120A■
800
1000
1200
13569.00
13569.00
13569.00
SHND69800A■
SHND69100A■
SHND69120A■
800
1000
1200
15151.00
15151.00
15151.00
SCND69800A■
SCND69100A■
SCND69120A■
800
1000
1200
20855.00
20855.00
20855.00
SND69800AG■
SND69100AG■
SND69120AG■
800
1000
1200
15272.00
15272.00
15272.00
SHND69800AG■
SHND69100AG■
SHND69120AG■
800
1000
1200
16733.00
16733.00
16733.00
SCND69800AG■
SCND69100AG■
SCND69120AG■
800
1000
1200
22969.00
22969.00
22969.00
SND69800ANT■
SND69100ANT■
SND69120ANT■
800
1000
1200
14192.00
14192.00
14192.00
SHND69800ANT■
SHND69100ANT■
SHND69120ANT■
800
1000
1200
15772.00
15772.00
15772.00
SCND69800ANT■
800
SCND69100ANT■ 1000
SCND69120ANT■ 1200
21700.00
21700.00
21700.00
17120.00
17120.00
17120.00
SHND69800ANGT■ 800
SHND69100ANGT■ 1000
SHND69120ANGT■ 1200
18738.00
18738.00
18738.00
SCND69800ANGT■ 800
SCND69100ANGT■ 1000
SCND69120ANGT■ 1200
25762.00
25762.00
25762.00
SND69800ANGT■
800
SND69100ANGT■ 1000
SND69120ANGT■ 1200
SND 1200A Frame – 100% Rated 햲
Current Limiting
Type SND6-H
Type SCND6-H
Type SHND6H
Blue Label
Black Label
3-Pole, 600V AC
Red Label
3-Pole, 600V AC
3-Pole, 600V AC
Catalog
Number
Max
List
Current Price
Rating $
Catalog
Number
Max
List
Current Price
Rating $
SND69800AH■
SND69100AH■
SND69120AH■
800
1000
1200
14955.00
14955.00
14955.00
SHND69800AH■
SHND69100AH■
SHND69120AH■
800
1000
1200
16657.00
16657.00
16657.00
SCND69800AH■
SCND69100AH■
SCND69120AH■
800
1000
1200
24085.00
24085.00
24085.00
SND69800AGH■
SND69100AGH■
SND69120AGH■
800
1000
1200
16766.00
16766.00
16766.00
SHND69800AGH■
SHND69100AGH■
SHND69120AGH■
800
1000
1200
18418.00
18418.00
18418.00
SCND69800AGH■
SCND69100AGH■
SCND69120AGH■
800
1000
1200
26551.00
26551.00
26551.00
SND69800ANTH■
SND69100ANTH■
SND69120ANTH■
800
1000
1200
15628.00
15628.00
15628.00
SHND69800ANTH■
SHND69100ANTH■
SHND69120ANTH■
800
1000
1200
17335.00
17335.00
17335.00
SCND69800ANTH■
SCND69100ANTH■
SCND69120ANTH■
800
1000
1200
25060.00
25060.00
25060.00
SND69800ANGTH■ 800
SND69100ANGTH■ 1000
SND69120ANGTH■ 1200
18826.00
18826.00
18826.00
SHND69800ANGTH■ 800
SHND69100ANGTH■ 1000
SHND69120ANGTH■ 1200
20620.00
20620.00
20620.00
SCND69800ANGTH■ 800
SCND69100ANGTH■ 1000
SCND69120ANGTH■ 1200
29750.00
29750.00
29750.00
MOLDED CASE
CIRCUIT BREAKERS
Max
List
Current Price
Rating $
6
Catalog
Number
Trip Unit Adjustable Functions
Suffix
Letter
Code
Short
Time
Pick Up
Short
Time
Delay
Short
Time
l2t
Pick Up
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Trip
Type
Cont
Current
Setting
Long
Time
Delay
Instantaneous
Setting
A
LI
⻫
⻫
⻫
AG
LIG
⻫
⻫
⻫
ANT
LSI
⻫
⻫
ANGT
LSIG
⻫
⻫
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
⻫
⻫
Neutral Transformers
Interrupting Ratings
Breaker
Type
RMS Symmetrical kA UL 489 (File E10848)
240V AC
480V AC
600V AC
SND6
SHND6
SCND6
065
100
200
050
065
100
25
50
65
Ampere
Rating
Catalog
Number
List
Price $
0800
1000
1200
N08SMDA
N10SNDA
N12SNDA
423.00
423.00
423.00
For inches / millimeters conversion, see Application Data section.
For ordering information and terminal connectors,
and enclosures, see page 6-55.
Note: “G” suffix in catalog number denotes circuit
breaker for 3-phase, 3-wire circuits.
For 3-phase, 4-wire, order correct 4th wire (neutral)
transformer as separate and additional item.
Discount Schedule MCCB
■ Built to order. Allow 2–3 weeks for delivery.
햲
햳
Use 2-3TA4P8500 for 3-pole. These kits are rated for
90°C wire. 90°C Cu only cable must be used, and sized
per 75°C ampacity.
SND6, SHND6 and SCND6 circuit breakers are UL
Listed for reverse connection applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-57
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
MD/SMD 800A Frame
ND/SND 1200A Frame
PD/SPD 1600A Frame
RD 2000A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S01MN6
S02MN6▲
S03MN6
S15MN6▲
S04MN6▲
S06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
S01MN64A
—
S03MN64A▲
S15MN64A▲
S04MN64A▲
—
636.00
—
897.00
897.00
897.00
—
S16MN6▲
S07MN6
S09MN6▲
S11MN6
S13MN6▲
636.00
636.00
636.00
636.00
636.00
S16MN64A▲
S07MN64A
—
S11MN64A▲
S13MN64A▲
897.00
897.00
—
897.00
897.00
DC
120
208
240
277
480
600
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
1 Undervoltage Trip
DC
120
208
240
277
480
600
Sensitrip Ammeter
MOLDED CASE
CIRCUIT BREAKERS
6
Accessory modules can mount in either
left hand or right hand poles of all circuit
breakers, including solid state. Exception:
when mechanical interlock is used.
Accessories cannot be mounted in left
pole.
024
048
125
250
1 Undervoltage Trip and
1 Auxiliary Switch
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
U01MN6
U02MN6▲
U03MN6▲
U15MN6▲
U04MN6▲
U06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
U01MN64A
U02MN64A▲
U03MN64A▲
U15MN64A▲
U04MN64A▲
—
897.00
897.00
897.00
897.00
897.00
—--
U01MN64AA
U02MN64AA▲
U03MN64AA▲
U15MN64AA▲
U04MN64AA▲
—
1157.00
1157.00
1157.00
1157.00
1157.00
—---
U07MN6
U09MN6▲
U11MN6▲
U13MN6▲
636.00
636.00
636.00
636.00
U07MN64A
U09MN64A▲
U11MN64A▲
U13MN64A▲
897.00
897.00
897.00
897.00
U07MN64AA
U09MN64AA▲
U11MN64AA▲
U13MN64AA▲
1157.00
1157.00
1157.00
1157.00
Auxiliary Switch Combinations
Maximum Voltage
1 Form C
AC
DC
Catalog Number
List Price $
Catalog Number
2 Form C
480
250
A01MN64
271.00
A02MN64
540.00
—
12
A01MNDLV▲
342.00
A02MNDLV▲
684.00
List Price $
Alarm Switch Combinations
Maximum
Voltage
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog Number List Price $ Catalog Number
List Price $ Catalog Number List Price $
480
250
B00MN64
540.00
271.00
A01MN64B
A02MN64B
802.00
Plug-in Ammeter Display Units
Breaker Type
SMD, SND, SPD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
Ammeter Mounting Kit
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
▲ Built to order. Allow 6–8 weeks for delivery.
6-58
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
PD 1600A Frame Sentron Series
Selection
Type PXD6 Non-Interchangeable Trip
Blue Label
3-Pole 600V AC, 250-500V DC
Continuous
Current Rating
40˚C
1200
1400
1600
Complete Breaker Assembled
(Frame/Trip Unit Only)
Mounting
Assembly
Catalog Number
PXD63B120■
PXD63B140■
PXD63B160
Catalog Number List Price $
MB9301
-or1227.00
MBR9302
List Price $
16870.00
16870.00
16870.00
Lugs (6 required)
Catalog Number
List Price $
TA5P600
320.00
Type PD6 Interchangeable Trip
Blue Label
3-Pole 600V AC, 250-500V DC
Continuous
Current
Rating 40°C
1200
1400
1600
Complete Breaker
Unassembled
Frame Only
Catalog
Number
Catalog
Number
List
Price $
Trip Unit Only
List
Catalog
Price $ Number
PD63B120■ 20017.00
PD63B140 20017.00 PD63F160
PD63B160 20017.00
Mounting
Assembly
List
Price $
Catalog
Number
Lugs (6 required)
List
Catalog
Price $ Number
List
Price $
PD63T120■ 8199.00 MB9301
8671.00 PD63T140 8199.00
-or1227.00 TA5P600
PD63T160 8199.00 MBR9302
320.00
Type HPXD6 Non-Interchangeable Trip
Blue Label
3-Pole 600V AC, 250-500V DC
Continuous Current
Rating 40°C
Complete Breaker Assembled (Frame/ Trip Unit Only)
Catalog Number
List Price $
19029.00
HPXD63B120■
19029.00
HPXD63B140■
HPXD63B160
19029.00
1200
1400
1600
Type HPD6 Interchangeable Trip
Black Label
3-Pole 600V AC, 250-500V DC
Catalog
Number
List
Price $
Trip Unit Only
List
Catalog
Price $ Number
HPD63B120■ 22174.00
HPD63B140 22174.00 HPD63F160
HPD63B160 22174.00
List
Price $
Catalog
Number
Lugs (6 required)
List
Catalog
Price $ Number
List
Price $
PD63T120■ 8199.00 MB9301
10828.00 PD63T140 8199.00 -or1227.00 TA5P600
PD63T160 8199.00 MBR9302
320.00
Type CPD6 Non-Interchangeable Trip
Fuseless Current Limiting
3-Pole 600V AC, 250-500V DC
Red Label
Complete Breaker Assembled (Frame/ Trip Unit Only)
Catalog Number
List Price $
21310.00
CPD63B120■
21310.00
CPD63B140■
21310.00
CPD63B160■
Continuous Current
Rating 40°C
1200
1400
1600
Lugs
Catalog
Number
TA5P600
TC5R600
TA4P750▲
TA6R600
No of Cables
per
Connector
1-5 Pcs.
1-5 Pcs.
1-4 Pcs.
1-6 Pcs.
Wire Range
300-600 kcmil Cu/Al
300-600 kcmil Cu only
500-750 kcmil Cu/Al
300-600 kcmil Cu/Al
List
Price $
320.00
426.00
254.00
338.00
Interrupting Ratings
Breaker
Type
PD6, PXD6
UL 489 A IR
IEC 947-2
RMS Symmetrical KA
Volts AC (50/60HZ)
Volts AC
240
480
600
Volts DC
220/240
250
(lcu) (lcs) (lcu) (lcs) (lcu) (lcs)
500
380/415
500
65
50
25
30 (2P)
25 (3P)
65
33
40
10
30
8
HPD6, HPXD6
100
65
50
30 (2P)
50 (3P)
100
50
65
17
42
11
CPD6
200
100
65
30 (2P)
50 (3P)
200
100
100
25
65
17
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
Use
two outside poles of a 3-pole circuit breaker for 250V
wired as shown on page 6-3, this circuit breaker is
When
Discount Schedule MCCB
UL listed and rated for use on 500V DC ungrounded UPS
systems only.
HPXD6 and CPD6 type circuit breakers are UL
Listed for reverse feed applications.
For additional information See Note: A, page 6-81.
PXD6,
HACR rated.
Note: PD frame qualified to UL489 supplement B “NAVAL”.
See page 6-84 for additional information.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-59
MOLDED CASE
CIRCUIT BREAKERS
1200
1400
1600
Frame Only
Catalog
Number
Mounting
Assembly
Complete Breaker Unassembled
with Lugs
Prices of PD6, HPD6, RD6, and HRD6
type breakers include frame, trip,
mounting base (MB9301), and both
line and load lugs (PD Frame –
TA5P600, RD Frame – TC5R600). When
ordered by these catalog numbers, the
customer will receive the frame, trip,
mounting assembly and lugs
separately packaged. For applications
requiring different mounting base or
lugs, order individual items as needed.
Complete Breaker Assembled
without Lugs
Prices of PXD6, HPXD6, RXD6, HRXD6
and CPD6 type breakers include frame
with non-interchangeable trip unit
installed only. Order required
mounting base and lugs separately.
100% Rated
Types PXD6, HPXD6 breakers are
available with 100% ratings. To order
add suffix “H” to catalog number,
and 10% to list price. 100% PD
breakers require 90˚ C cable sized
at 75˚ C ampacity and TC5R600 lugs.
RD 2000A Frames not available with
100% ratings.
50°C Applications see page 6-84.
400HZ Applications see page 6-84.
6
Continuous
Current
Rating 40°C
Complete Breaker
Unassembled
Ordering Instructions
Molded Case Circuit Breakers
SPD 1600A Frame Digital Solid State Sentron Sensitrip III Series
Selection/Dimensions
Ordering Information
Pricing information for all Digital Sentron Series PD frame unit is for breaker
only. Price required mounting block assembly and necessary terminal
connectors as separate items.
SPD6 and SHPD6 are acceptable for reverse connection applications.
Type SPD6
Type SHPD6
Blue Label
Black Label
3-Pole, 600V AC
Catalog
Number
Max
Current
Rating
List
Price $
Catalog
Number
Max
Current
Rating
List
Price $
SPD69140■
SPD69160■
1400
1600
20564.00
20564.00
SHPD69140■
SHPD69160■
1400
1600
21211.00
21211.00
SPD69140G■
SPD69160G■
1400
1600
22340.00
22340.00
SHPD69140G■
SHPD69160G■
1400
1600
23206.00
23206.00
SPD69140NT■
SPD69160NT■
1400
1600
20903.00
20903.00
SHPD69140NT■
SHPD69160NT■
1400
1600
21972.00
21972.00
SPD69140NGT■
SPD69160NGT■
1400
1600
24776.00
24776.00
SHPD69140NGT■
SHPD69160NGT■
1400
1600
25709.00
25709.00
Short
Time
Pick Up
Short
Time
Delay
Short
Time
l2t
Pick Up
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Suffix
Letter
Code
Trip
Type
Cont
Current
Setting
Long
Time
Delay
Instantaneous
Setting
None
LI
⻫
⻫
⻫
G
LIG
⻫
⻫
⻫
NT
LSI
⻫
⻫
NGT
LSIG
⻫
⻫
Lugs햲
No. of
Catalog Cables per Wire
Number Connector Range
TA5P600 1–5 pcs.
TC5R600 1–5 pcs.
TA6R600 1–5 pcs.
List
Price
$
300–600 kcmil Cu/Al
320.00
300–600 kcmil Cu Only 426.00
300–600 kcmil Cu/Al
338.00
Neutral Transformers
Ampere
Rating
Catalog
Number
List
Price $
1400
1600
N14SPD
N16SPD
423.00
423.00
Type
Catalog
Number
List
Price $
1
PRD6N1
6324.00
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
Enclosure
⻫
⻫
Interrupting Ratings
Mounting Block (Required)햲
RMS Symmetrical kA UL 489
Breaker
Type
SPD6
SHPD6
240V AC
480V AC
600V AC
Catalog
Number
065
100
050
065
025
050
MB9301
MBR9302
List
Price $
1227.00
1227.00
All PD, RD Frames:
6.19
6.00
2.00
MB9301 (shown)
MBR9302
25.50
18.73
MBR9302
16.00
2.00
16.00
MOLDED CASE
CIRCUIT BREAKERS
6
3-Pole, 600V AC
MB9301
MBR9302
MB9301
For inches / millimeters conversion, see Application Data section.
■ Built to order. Allow 2–3 weeks for delivery.
햲 For
additional information, see Note: A, page 6-81.
Note: The PD frame circuit breaker requires the use of a
connect-all mounting assembly to allow for placing
into service.
6-60
Note: “G” suffix in catalog number denotes circuit
breaker for 3-phase, 3-wire circuits.
For 3-phase, 4-wire, order correct 4th wire (neutral)
transformer as separate and additional item.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
MD/SMD 800A Frame
ND/SND 1200A Frame
PD/SPD 1600A Frame
RD 2000A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S01MN6
S02MN6▲
S03MN6
S15MN6▲
S04MN6▲
S06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
S01MN64A
—
S03MN64A▲
S15MN64A▲
S04MN64A▲
—
897.00
—
897.00
897.00
897.00
—
S16MN6▲
S07MN6
S09MN6▲
S11MN6
S13MN6▲
636.00
636.00
636.00
636.00
636.00
S16MN64A▲
S07MN64A
—
S11MN64A▲
S13MN64A▲
897.00
897.00
—
897.00
897.00
DC
120
208
240
277
480
600
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
1 Undervoltage Trip
DC
Catalog Number
120
208
240
277
480
600
Accessory modules can mount in either
left hand or right hand poles of all circuit
breakers, including solid state. Exception:
when mechanical interlock is used.
Accessories cannot be mounted in left
pole.
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
List Price $
Catalog Number
List Price $
U01MN6
U02MN6▲
U03MN6▲
U15MN6▲
U04MN6▲
U06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
U01MN64A
U02MN64A▲
U03MN64A▲
U15MN64A▲
U04MN64A▲
—
897.00
897.00
897.00
897.00
897.00
—
U01MN64AA
U02MN64AA▲
U03MN64AA▲
U15MN64AA▲
U04MN64AA▲
—
1157.00
1157.00
1157.00
1157.00
1157.00
—
U07MN6
U09MN6▲
U11MN6▲
U13MN6▲
636.00
636.00
636.00
636.00
U07MN64A
U09MN64A▲
U11MN64A▲
U13MN64A▲
897.00
897.00
897.00
897.00
U07MN64AA
U09MN64AA▲
U11MN64AA▲
U13MN64AA▲
1157.00
1157.00
1157.00
1157.00
Auxiliary Switch Combinations
1 Form C
AC
DC
Catalog Number
List Price $
Catalog Number
2 Form C
480
250
A01MN64
271.00
A02MN64
540.00
—
12
A01MNDLV▲
342.00
A02MNDLV▲
684.00
List Price $
Alarm Switch Combinations
Maximum
Voltage
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
1 Alarm Switch and
1 Auxiliary Switch
1 Alarm Switch
1 Alarm Switch and
2 Auxiliary Switches
AC
DC
Catalog Number List Price $ Catalog Number
List Price $ Catalog Number List Price $
480
250
B00MN64
540.00
271.00
A01MN64B
A02MN64B
802.00
Plug-in Ammeter Display Units
Breaker Type
SMD, SND, SPD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
Ammeter Mounting Kit
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-61
MOLDED CASE
CIRCUIT BREAKERS
Maximum Voltage
6
Sensitrip Ammeter
024
048
125
250
List Price $
1 Undervoltage Trip and
1 Auxiliary Switch
Molded Case Circuit Breakers
RD 2000A Frame Sentron Series
Selection
Type RXD6
Blue Label
Non-Interchangeable Trip (Assembled Circuit Breaker Only Without Lugs)
3-Pole 600V AC, 250-500V DC
Continuous
Current
Rating 40°C
1600
1800
2000
Complete Breaker
Assembled
(Frame/Trip Unit Only)
Mounting
Assembly
Catalog
Number
List
Price $
Catalog
Number
List
Price $
RXD63B160
RXD63B180
RXD63B200
18701.00
18701.00
18701.00
MB9301
-orMBR9302
1227.00
Lugs (6 required)
Catalog
Number
List
Price $
TC5R600
426.00
1227.00
Type RD6
Blue Label
Interchangeable Trip (Unassembled Circuit Breaker with Lugs)
3-Pole 600V AC, 250-500V DC
Continuous
Current
Rating 40°C
Frame Only
Catalog
Number
Catalog
Number
List
Price $
RD63B160■ 22484.00
RD63B180
22484.00
RD63B200
22484.00
1600
1800
2000
Mounting Block
Complete Breaker
Unassembled
with Lugs
List
Price $
Trip Unit Only
Mounting
Assembly
Catalog
Number
Catalog
Number
List
Price $
Lugs (6 required)
List
Catalog List
Price $ Number Price $
RD63T160■ 8927.00 MB9301 1227.00
RD63F200 9774.00 RD63T180 8927.00 -orTC5R600 426.00
RD63T200 8927.00 MBR9302 1227.00
MOLDED CASE
CIRCUIT BREAKERS
6
Type HRXD6
Black Label
Continuous
Current Rating
40°C
Complete Breaker Assembled
(Frame/ Trip Unit Only)
Catalog Number
List Price $
1600
1800
2000
HRXD63B160■
HRXD63B180■
HRXD63B200
21025.00
21025.00
21025.00
Black Label
Type HRD6
Complete Breaker
Unassembled
Continuous with Lugs
Current
Catalog
List
Rating 40°C Number
Price $
1600
1800
2000
Frame Only
Catalog
Number
Mounting
Assembly
Trip Unit Only
List
Price $
Catalog
Number
List
Catalog
Price $ Number
Catalog
Number
Connection
Points
MB9301
MBR9302
Front
Rear
List
Price $
1227.00
1227.00
Shipping Weights
Number of
Number per
Poles
Carton
PXD6, HPXD6, RXD6, HRXD6,
Assembled Breakers
3
1
PD6, HPD6, RD6, HRD6
Frame Only
3
1
PD6, RD6
Trip Unit Only
3
1
Mounting Assembly
MB9301
1
MBR9302
1
Shipping
Weight (lbs.)
CPD6
61.5
55.0
06.5
53.0
50.9
Lugs
Lugs
(6 required)
List
Catalog List
Price $ Number Price $
HRD63B160■ 24808.00
RD63T160■ 8927.00 MB9301 1227.00
HRD63B180 24808.00 HRD63F200 12098.00 RD63T180
8927.00 -orTC5R600 426.00
HRD63B200 24808.00
RD63T200
8927.00 MBR9302 1227.00
Catalog
Number
No of Cables
per
Connector
Wire Range
TA5P600
TC5R600
TA4P750▲
TA6R600
1-5
1-5
1-4
1-6
Pcs.
Pcs.
Pcs.
Pcs.
300-600
300-600
500-750
300-600
kcmil
kcmil
kcmil
kcmil
List
Price $
Cu/Al
Cu only
Cu/Al
Cu/Al
320.00
426.00
254.00
338.00
Interrupting Ratings
UL 489 A IR
IEC 947-2
RMS Symmetrical KA
Volts AC (50/60HZ)
Volts AC
Breaker
Type
240
RD6, RXD6
HRD6, HRXD6
480
600
Volts DC
220/240
250
(lcu) (lcs) (lcu) (lcs) (lcu) (lcs)
500
380/415
500
65
50
25
30 (2P)
25 (3P)
65
33
40
10
30
8
100
65
50
30 (2P)
50 (3P)
100
50
65
17
42
11
Instantaneous Adjustment Trip Range (PD / RD Frames)
Breaker Ampere
Rating
1200-2000
Nominal Instantaneous Values
+20%
Tolerance
Low
2
3
4
5000
5715
6430
7145
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
Use
two outside poles of a 3-pole circuit breaker for
250V DC applications.
6-62
5
7860
6
8575
7
9790
+20%
Tolerance
High
10,000
When
wired as shown on page 6-3, this circuit breaker is
UL listed and rated for use on 500V DC ungrounded
UPS systems only.
RXD6 and HRXD6 type circuit breakers are UL Listed for
reverse feed applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
HACR
rated.
For additional information See Note: A, page 6-81.
Note: RD frame qualified to UL489 supplement B “NAVAL”.
See page 6-84 for additional information.
Note: For required mounting base (MB9301 or MBR9302)
see page 6-60.
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Accessories for:
MD/SMD 800A Frame
ND/SND 1200A Frame
PD/SPD 1600A Frame
RD 2000A Frame
Selection
Shunt Trip Combinations
1 Shunt Trip and
1 Auxiliary Switch
Control Voltage
1 Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
S01MN6
S02MN6▲
S03MN6
S15MN6▲
S04MN6▲
S06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
S01MN64A
—
S03MN64A▲
S15MN64A▲
S04MN64A▲
—
897.00
—
897.00
897.00
897.00
—
S16MN6▲
S07MN6
S09MN6▲
S11MN6
S13MN6▲
636.00
636.00
636.00
636.00
636.00
S16MN64A▲
S07MN64A
—
S11MN64A▲
S13MN64A▲
897.00
897.00
—
897.00
897.00
DC
120
208
240
277
480
600
012
024
048
125
250
Undervoltage Trip Combinations
Control
Voltage
AC
1 Undervoltage Trip
DC
Catalog Number
120
208
240
277
480
600
Accessory modules can mount in either
left hand or right hand poles of all circuit
breakers, including solid state. Exception:
when mechanical interlock is used.
Accessories cannot be mounted in left
pole.
1 Undervoltage Trip and
2 Auxiliary Switches
Catalog Number
Catalog Number
List Price $
U01MN6
U02MN6▲
U03MN6▲
U15MN6▲
U04MN6▲
U06MN6▲
636.00
636.00
636.00
636.00
636.00
636.00
U01MN64A
U02MN64A▲
U03MN64A▲
U15MN64A▲
U04MN64A▲
—
List Price $
897.00
897.00
897.00
897.00
897.00
—
U01MN64AA
U02MN64AA▲
U03MN64AA▲
U15MN64AA▲
U04MN64AA▲
—
1157.00
1157.00
1157.00
1157.00
1157.00
—
U07MN6
U09MN6▲
U11MN6▲
U13MN6▲
636.00
636.00
636.00
636.00
U07MN64A
U09MN64A▲
U11MN64A▲
U13MN64A▲
897.00
897.00
897.00
897.00
U07MN64AA
U09MN64AA▲
U11MN64AA▲
U13MN64AA▲
1157.00
1157.00
1157.00
1157.00
Auxiliary Switch Combinations
1 Form C
AC
DC
Catalog Number
List Price $
Catalog Number
2 Form C
480
250
A01MN64
271.00
A02MN64
540.00
—
12
A01MNDLV▲
342.00
A02MNDLV▲
684.00
List Price $
Alarm Switch Combinations
The Ammeter Display Units plug into
the Sensitrip Trip Unit and displays
the phase current flowing in the
breaker. They are powered by the
breaker’s CT’s with replaceable
battery back-up for maintaining trip
and max logs.
The SADU reads currents, current
imbalance, current demand, and trip
status.
Maximum
Voltage
1 Alarm Switch
1 Alarm Switch and
1 Auxiliary Switch
AC
DC
Catalog Number List Price $ Catalog Number
List Price $ Catalog Number List Price $
480
250
B00MN64
540.00
271.00
A01MN64B
1 Alarm Switch and
2 Auxiliary Switches
A02MN64B
802.00
Plug-in Ammeter Display Units
Breaker Type
SMD, SND, SPD
Description
Catalog Number
List Price $
Display Unit
SADU
1776.00
Remote Mounting Kit
SADURMK18
342.00
Ammeter Mounting Kit
The Ammeter may also be panel or
door mounted using the SADURMK18
remote mounting kit.
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-63
MOLDED CASE
CIRCUIT BREAKERS
Maximum Voltage
6
Sensitrip Ammeter
024
048
125
250
List Price $
1 Undervoltage Trip and
1 Auxiliary Switch
Molded Case Circuit Breakers
STD 3200A Frame Digital Solid State Sentron Sensitrip III Series
Type STD6
Type SHTD6
Blue Label
Black Label
3-Pole, 600V AC, 80% Rated
Catalog
Number
STD63F2000■
STD63F2500■
STD63F3200■
2000
2500
3200
SHTD63F2000■ 2000
SHTD63F2500■ 2500
SHTD63F3200■ 3200
24668.00
27714.00
30485.00
3-Pole, 600V AC, 100% Rated
Max
List
Current Price
Rating $
STD63F2000H■ 2000
STD63F2500H■ 2500
STD63F3200H■ 3200
27132.00
30485.00
33533.00
3-Pole, 600V AC, 80% Rated
Max
List
Current Price
Rating $
Max
List
Current Price
Rating $
Catalog
Number
STD Breakers are ordered by
component - Frame, Trip Unit &
Rating Plug, Accessories. Contact
Sales Office for instructions.
29847.00
33533.00
36884.00
3-Pole, 600V AC, 100% Rated
Max
List
Current Price
Rating $
SHTD63F2000H■ 2000
SHTD63F2500H■ 2500
SHTD63F3200H■ 3200
Max
List
Current Price
Rating $
SHHTD63F2000■ 2000
SHHTD63F2500■ 2500
SHHTD63F3200■ 3200
27132.00
30485.00
33533.00
3-Pole, 600V AC, 100% Rated
Catalog
Number
Ordering Information
Red Label
3-Pole, 600V AC, 80% Rated
Catalog
Number
Catalog
Number
Type SHHTD6
Selection/Dimensions
Catalog
Number
Max
List
Current Price
Rating $
SHHTD63F2000H■ 2000
SHHTD63F2500H■ 2500
SHHTD63F3200H■ 3200
29847.00
36884.00
40573.00
H
H1
32828.00
40573.00
44630.00
Trip Unit
Fits Breaker Frame with Continuous Rating
2000 Amp
2500 Amp
3200 Amp
List
Price $
STD20TLS■
STD25TLS■
STD32TLS■
2260.00
STD20TLI■
STD20TLSI■
STD25TLI■
STD25TLSI■
STD32TLI■
STD32TLSI■
1611.00
Breaker Type
H
H1
W
D
2938.00
STD20TLSG■
STD20TLIG■
STD25TLSG■
STD25TLIG■
STD32TLSG■
STD32TLIG■
4260.00
27.5
20.5
15.5
12.5
LIG
STD
SHTD
SHHTD
LSIG
STD20TLSIG■
STD25TLSIG■
STD32TLSIG■
4981.00
Function
Catalog Numbers
LS
LI
LSI
LSG
2835.00
MOLDED CASE
CIRCUIT BREAKERS
6
Rating Plug
Fits Breaker Frame with Continuous Rating
Long Time
Amperes
2000 Amp
2500 Amp
3200 Amp
1000
20STD1000■
1200
20STD1200■
1600
20STD1600■
25STD1600■
32STD1600■
2000
20STD2000■
25STD2000■
25STD2500■
32STD2000■
Catalog Numbers
List
Price $
352.00
32STD2500■
3000
32STD3000■
3200
32STD3200■
STD6
SHTD6
SHHTD6
RMS Symmetrical kA UL 489 (File E 10848)
085
150
200
Dimensions (in Inches)햲
Terminal Connectors
Catalog
Number
List
Price $
STD32TCON
224.00
Cable Lugs
480V AC
065
100
150
600V AC
050
085
100
IEC60947-2 (Icu=Ics, Icw=50kA)
415VAC
—
100kA
—
Catalog
Number
TA6R600STD
No of
Cables
per Con- Wire
nector
Range
(1–6 pcs.) 250-600
kcmil Cu/Al
List
Price
$
323.00
Neutral Transformers
Interrupting Ratings
240V AC
D
(2000A Only)
2500
Breaker
Type
W
690VAC
—
65kA
—
Ampere
Rating
Catalog
Number
List
Price $
2000
2500
3200
N20STD
N25STD
N32STD
460.00
460.00
460.00
Accessories pages 6-65 and 6-84 to 6-91
■ Built to order. Allow 2–3 weeks for delivery.
햲 Dimensions
6-64
for reference, not for construction.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Internal Accessories
Selection
Accessories for:
Shunt Trip / Undervoltage Release
STD 3200A Frame
STD Breakers are built to order. It is
recommended that accessories be
ordered installed in the breaker. They
may also be field added.
Control Voltage
Shunt Trip
AC
Catalog Number
List Price $
Catalog Number
List Price $
STDST120▲
STDST240▲
STDST480▲
—
776.00
776.00
776.00
—
STDUV120▲
STDUV240▲
STDUV480▲
STDUV600▲
776.00
776.00
776.00
776.00
STDST12▲
STDST24▲
STDST48▲
STDST125▲
776.00
776.00
776.00
776.00
—
STDUV24▲
STDUV48▲
STDUV125▲
—
776.00
776.00
776.00
120
240
480
600
012
024
048
125
Ammeter Display Module
The STDDM plugs into the trip unit of
the STD 3200 Amp breaker. It provides
readout of currents as well as load current alarm (in conjunction with the display module relay).
Ground Fault Monitor
The Ground Fault Monitor for the STD
3200 Amp breaker family plugs into the
Trip Unit and reads the ground current.
This is either the residual current calculated from the measured three phases
and neutral (if present) or the directly
measured ground return current in the
ground lead of the supply transformer,
depending on the configuration of the
the trip unit. In addition to displaying the
ground current, the display module provides an alarm on ground overcurrent,
settable at three pickup levels with three
delays (in conjunction with the display
module relay).
DC
Under Voltage Release
Auxiliary Switches
Control Voltage
Quantity Contacts
AC
NO
NC
Catalog Number
List Price $
1
2
3
4
5
6
1
2
3
4
5
6
STDAS2▲
STDAS4▲
STDAS6▲
STDAS8▲
STDAS10▲
STDAS12▲
397.00
653.00
980.00
1308.00
1641.00
1945.00
600
DC
300
Auxiliary Power Module
Alarm Switch
Control Voltage
AC
DC
Catalog
Number
List
Price $
600
300
STDAS▲
768.00
Power Source
Catalog Number
List Price $
120V AC
STDAPM▲
718.00
Electronic Bell Alarm / Display Relay
Bell Alarm
AC
DC
Catalog Number
List Price $
Catalog Number
List Price $
24
48
125
STDBA120▲
STDBA24▲
STDBA48▲
STDBA125▲
776.00
776.00
776.00
776.00
STDDMR120▲
STDDMR24▲
STDDMR48▲
STDDMR125▲
776.00
776.00
776.00
776.00
120
Display Module Relay
Ground Fault Monitor
Catalog Number
List Price $
Catalog Number
List Price $
STDDM▲
3198.00
STDGFM▲
4102.00
Mounting Bracket for
Terminal Block
For mounting Control Terminal Blocks to
breakers. One per each side as required.
Catalog Number
List Price $
STDTBM▲
98.00
Secondary Terminal Blocks
The appropriate number and location of terminal blocks should be selected from the table below based on the features and accessories ordered on
each circuit breaker. Control Terminal Blocks also require separate mounting brackets for the left and right sides.
Accessory
Contact
Block
Position
Catalog
Number
List
Price $
LEFT TOP
STDTBLT▲
162.00
LEFT BOTTOM
STDTBLB▲
162.00
RIGHT TOP
STDTBRT▲
162.00
RIGHT BOTTOM
STDTBRB▲
162.00
Shunt
Trip
Undervoltage
Release
Neutral
Sensor
X
X
X
Zone
Interlock
and
ACCESS
Auxiliary Switches
Bell Alarm햲
or Display
Module Relay
1A and 1B
2A and 2B
3A and 3B
4A and 4B
5A and 5B
6A and 6B
X
X
X
X
X
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-65
MOLDED CASE
CIRCUIT BREAKERS
Ammeter-Display Module
6
Control Voltage
Molded Case Circuit Breakers
Magnetic Trip Only — ETI Motor Circuit Protector
Instantaneous Trip Range
Breaker
Type
ED6-A
600V AC
250V DC
CED6-A
600V AC
250V DC
FXD6
600V AC
250V DC
CFD6
MOLDED CASE
CIRCUIT BREAKERS
6
600V AC
250V DC
JXD6(A)
600V AC
250V DC
CJD6
600V AC
250V DC
LXD6(A)
600V AC
250V DC
CLD6
600V AC
250V DC
LMXD6
600V AC
250V DC
MXD6
600V AC
250V DC
CMD6
600V AC
250V DC
Ampere
Rating
001
002
003
005
010
025
030
040
050
100
125
SHIPPING:
001
002
003
005
010
025
030
040
050
100
125
SHIPPING:
150
150
150
250
SHIPPING:
150
150
150
250
SHIPPING:
400
400
SHIPPING:
400
400
SHIPPING:
600
600
SHIPPING:
600
600
SHIPPING:
800
800
SHIPPING:
800
800
800
SHIPPING:
800
800
800
Selection
Minimum
002.6
007
010
016
030
055
080
115
180
315
500
Maximum
00009
00022
00035
00054
00100
00180
00270
00375
00600
01000
01250
002.6
007
010
016
030
055
080
115
180
315
500
00009
00022
00035
00054
00100
00180
00270
00375
00600
01000
01250
0400
0800
1100
1100
00800
01500
02500
02500
0400
0800
1100
1100
00800
01500
02500
02500
1250
2000
02500
04000
1250
2000
02500
04000
2000
3000
04000
06000
2000
3000
04000
06000
2800
3200
06000
08000
3000
4000
5000
06000
08000
10000
Complete Circuit Breaker Without Lugs
Catalog
Catalog
Number
List
Number
2-Pole
Price $
3-Pole
—
—
ED63A001
—
—
ED63A002
—
—
ED63A003
—
—
ED63A005
—
—
ED63A010
—
—
ED63A025
—
—
ED63A030
—
—
ED63A040
—
—
ED63A050
—
—
ED63A100
—
—
ED63A125
03.8 lbs. each
—
—
CED63A001■
—
—
CED63A001■
—
—
CED63A003■
—
—
CED63A005■
—
—
CED63A010■
—
—
CED63A025■
—
—
CED63A030■
—
—
CED63A040■
—
—
CED63A050■
—
—
CED63A100■
—
—
CED63A125■
06 lbs. each
—
—
FXD63L150■
—
—
FXD63A150
—
—
FXD63H150
—
—
FXD63A250
0
09 lbs. each
—
—
CFD63L150■
—
—
CFD63A150■
—
—
CFD63H150■
—
—
CFD63A250■
12 lbs. each
12 lbs. each
—
—
JXD63L400
JXD62H400■
3077.00
JXD63H400
16 lbs. each
20 lbs. each
CJD62L400■
6222.00
CJD63L400■
CJD62H400■
6222.00
CJD63H400■
29.5 lbs. each
31.5 lbs. each
LXD62L600■
4616.00
LXD63L600■
—
—
LXD63H600
16 lbs. each
20 lbs. each
CLD62L600■
10003.00
CLD63L600■
CLD62H600■
10003.00
CLD63H600■
31.5 lbs. each
—
—
LMXD63L800■
—
—
LMXD63A800
35 lbs. each
—
—
MXD63L800■
—
—
MXD63A800■
—
—
MXD63H800
3000
4000
5000
06000
08000
10000
—
—
—
SHIPPING:
Important Information
ETI interrupting ratings are determined through combination tests with properly
sized overload relays and contactors.
Connectors included when ordering by circuit breaker catalog number for
ED6 and CED6 ETI’s. Order ETI circuit breaker and lugs (2 per pole) separately
for the FXD6, CFD6, MXD6, CMD6, JXD6, CJD6, LXD6 and CLD6 ETI’s.
■ Built to order. Allow 2–3 weeks for delivery.
2-pole
available in 3-pole width only.
6-66
—
—
—
When applied on DC Circuits — Trip levels will increase
approximately +15 to 20%.
Tolerance -20/+30%
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
33 lbs. each
CMD63L800■
CMD63A800■
CMD63H800■
80 lbs. each
List
Price $
824.00
824.00
824.00
824.00
824.00
824.00
824.00
824.00
991.00
1052.00
1997.00
2811.00
2811.00
2811.00
2811.00
2811.00
2811.00
2811.00
2811.00
3360.00
3608.00
5409.00
3448.00
3448.00
3448.00
3448.00
6664.00
6664.00
6664.00
6664.00
3608.00
3608.00
7742.00
7742.00
5267.00
5267.00
12392.00
12392.00
7460.00
7460.00
7460.00
7460.00
7460.00
14019.00
14019.00
14019.00
Lug Information pages 6-81 to 6-83
Enclosures Section 5
Accessories pages 6-86 to 6-91
Application data pages 6-67 to 6-68
For 2-pole application use outside poles of 3-pole circuit
breaker.
Discount Schedule MCCB
Molded Case Circuit Breakers
Motor Circuits
Application
General
Protection of Motor Circuits
Molded case circuit breakers are used in
motor circuits as a disconnecting means
and for short-circuit protection. They
should be used in conjunction with
motor-running, over-current-protection
devices, and should permit the motor to
start without nuisance tripping from
motor-inrush current. The circuit breaker
should have a continuous-current rating
of not less than 115% of the motor
full-load current.
The recommended motor circuit
protectors (Siemens ETI instantaneous
only circuit breakers) listed have
continuous-current ratings of at least
115% of motor full-load currents. The
trip-setting positions are approximately
11 times motor full-load currents. The
suggested trip settings may have to be
adjusted upward to no higher than 1300%
of full-load current for non-design E type
motors, and no greater than 1700% of full
load current for design E motors, to allow
for motor start-up due to inrush currents.
Breaker Mounted Immediately Ahead
of Motor Starter
Siemens ETI motor circuit protectors are
recommended for use in combination
motor starters to provide selective
short-circuit protection for the motor
branch circuit. The adjustable
instantaneous-trip feature of the Siemens
ETI motor circuit protector provides for a
trip setting slightly above the peak
motor-inrush current. With this setting,
no delay is introduced in opening the
circuit when a fault occurs. This circuit
breaker has no time-delay trip element.
Therefore it must be used in conjunction
with, and immediately ahead of, the
motor-running overcurrent protective
device.
Important: The information below does
not apply to all motor applications: it
is recommended that the user refer to
the National Electrical Code (NEC) for
specific needs.
Table 1 (When Breaker is Mounted Immediately Ahead of Motor Starter)
3-Phase Induction Type Motors (Siemens ETI motor circuit protectors for branch circuit use with alternating-current combination, full voltage motor starters).
Catalog
Number
ED63A001
CED63A001
ED63A002
CED63A002
ED63A005
CED63A005
ED63A010
CED63A010
ED63A025
CED63A025
ED63A030
CED63A030
ED63A040
CED63A040
ED63A050
CED63A050
ED63A100
CED63A100
Motor Full
Load Amperes
38.46 – 55.37
55.38 – 70.75
70.76 – 84.60
84.61 – 96.14
96.15 – 113.60
30.76 – 35.37
35.38 – 39.99
44.51 – 49.23
53.84 – 58.45
58.46 – 63.06
63.07 – 74.50
61.53 – 69.22
69.23 – 76.91
84.61 – 92.29
100.00 – 108.00
108.00 – 115.00
115.00 – 136.00
85.00 – 100.00
100.00 – 115.00
131.00 – 146.00
162.00 – 177.00
177.00 – 192.00
192.00 – 227.00
95.00 – 110.00
110.00 – 124.00
138.00 – 151.00
165.00 – 178.00
178.00 – 192.00
192.00 – 227.00
154.00 – 176.00
176.00 – 198.00
220.00 – 242.00
264.00 – 285.00
285.00 – 308.00
308.00 – 326.00
155.00 – 176.00
176.00 – 198.00
220.00 – 242.00
264.00 – 285.00
285.00 – 308.00
308.00 – 326.00
Catalog
Number
ED63A125
CED63A125
FXD63L150
CFD63L150
FXD63A150
CFD63A150
FXD63A250
CFD63A250
JXD63L400
CJD63L400
JXD63H400
CJD63H400
LXD63L600
CLD63L600
ETI Trip
Adjustment
Low
2
3
4
High
Low
2
4
6
7
High
Low
2
4
6
7
High
Low
2
4
6
7
High
Low
2
4
6
7
High
Low
2
4
6
7
High
Low
2
4
6
7
High
Setting
Amperes
500
720
920
1100
1250
400
460
580
700
760
820
800
900
1100
1300
1400
1500
1100
1300
1700
2100
2300
2500
1250
1430
1790
2140
2320
2500
2000
2290
2860
3430
3710
4000
2000
2290
2860
3430
3710
4000
Motor Full
Load Amperes
231.00 – 264.00
264.00 – 292.00
330.00 – 362.00
395.00 – 428.00
428.99 – 462.00
462.00 – 490.00
215.00 – 238.00
238.00 – 261.00
261.00 – 284.00
308.00 – 369.00
369.00 – 423.00
423.00 – 462.00
462.00 – 490.00
246.00 – 269.00
269.00 – 284.00
284.00 – 323.00
362.00 – 492.00
492.00 – 562.00
562.00 – 616.00
616.00 – 660.00
231.00 – 264.00
264.00 – 292.00
292.00 – 330.00
362.00 – 395.00
428.00 – 462.00
462.00 – 490.00
308.00 – 352.00
352.00 – 442.00
442.00 – 447.00
483.00 – 527.00
571.00 – 616.00
616.00 – 660.00
385.00 – 440.00
495.00 – 550.00
605.00 – 660.00
660.00 – 695.00
Catalog
Number
LXD63H600
CLD63H600
LMXD63L800
LMXD63A800
MXD63L800
CMD63L800
MXD63A800
CMD63A800
MXD63H800
CMD63H800
ETI Trip
Adjustment
Low
2
4
6
7
High
Low
2
3
5
6
7
High
Low
2
3
5
6
7
High
Low
2
3
5
7
High
Low
2
3
5
7
High
Low
3
5
6
Setting
Amperes
3000
3430
4290
5140
5570
6000
2800
3100
3400
4000
4800
5500
6000
3200
3500
3700
4700
6400
7300
8000
3000
3430
3800
4710
5570
6000
4000
4570
5740
6280
7240
8000
5000
6430
7860
8575
Note: Low instantaneous settings have a +20% tolerance and high
settings have a +20% tolerance
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-67
MOLDED CASE
CIRCUIT BREAKERS
ED63A003
CED63A003
ETI Trip Setting
Adjustment
Amperes
Low
2.6
2
4.5
3
6
4
7.5
High
9
Low
7
2
11
3
15
4
19
High
22
Low
10
2
17
3
23
4
30
High
35
Low
16
2
26
3
36
4
46
High
54
Low
30
2
50
3
70
4
85
High
100
Low
55
2
90
3
125
4
155
High
180
Low
80
2
135
3
185
4
235
High
270
Low
115
2
185
3
255
4
325
High
375
Low
180
2
300
3
410
4
520
High
600
Low
315
2
540
3
740
4
890
High
1000
6
Motor
Full Load
Amperes
.20 –
.33
.34 –
.45
.46 –
.56
.57 –
.68
.69 –
.81
.53 –
.83
.84 – 1.14
1.15 – 1.45
1.46 – 1.68
1.69 – 2.00
.76 – 1.29
1.30 – 1.75
1.76 – 2.29
2.30 – 2.68
2.69 – 3.18
1.23 – 1.99
2.00 – 2.75
2.76 – 3.52
3.53 – 4.14
4.15 – 4.90
2.30 – 3.83
3.84 – 5.37
5.38 – 6.52
6.53 – 7.68
7.69 – 9.10
4.23 – 6.91
6.92 – 9.61
9.62 – 11.91
11.92 – 13.83
13.84 – 16.40
6.15 – 10.37
10.38 – 14.22
14.23 – 18.06
18.07 – 20.75
20.76 – 24.50
8.84 – 14.22
14.23 – 19.60
19.61 – 24.99
25.00 – 28.83
28.84 – 34.00
13.84 – 23.06
23.07 – 31.52
31.53 – 39.99
40.00 – 46.14
46.15 – 54.50
24.23 – 41.52
41.53 – 56.91
56.92 – 68.45
68.46 – 76.91
76.92 – 90.90
Molded Case Circuit Breakers
Motor Circuits
Application
Breaker Mounted at a Distance From
Motor Starter
ET thermal-magnetic circuit breakers
conform to the National Electrical Code
table 430-152 requirements for motor
branch and feeder circuit protection
when properly applied in conjunction with
motor-running overcurrent protective
devices. The recommended
Interrupt Ratings
For normal commercial purposes,
available fault current can conveniently
be obtained in the Interrupting
Selector Tables.
circuit-breaker ratings in Table 2 provide
adequate time delay for starting the
majority of three phase induction motors.
To determine the ampere ratings of the ET
breaker to protect a motor feeder, add the
rating of the ET breaker used to protect
the largest motor branch circuit in the
group to the full-load currents of the
remaining motors in the group.
Table 2 (When Breaker is Mounted at a Distance From Motor Starter)
3-Phase Induction Type Motors (EQ and ET circuit breakers (thermal-magnetic trip) for branch breaker use with alternating-current combination motor starters).
MOLDED CASE
CIRCUIT BREAKERS
6
Motor
Horsepower
Rating
0001⁄2
0003⁄4
001
0011⁄2
002
003
005
0071⁄2
010
015
020
025
030
040
050
060
075
100
200 and 208V Motors
240V Circuit Breaker Data
Breaker
Catalog
Ampere
Type
Number
Rating
BQ3B015
015
BQ3B015
015
BQ3B015
015
BQ
BQ3B015
015
BQ3B020
020
BQ3B030
030
BQ3B040
040
BQ3B060
060
BQ
BQ3B070
070
BQ3B100
100
FXD6
JXD2
JXD2
FXD63B125
FXD63B150
FXD63B175
FXD63B200
FXD63B225
JXD23B300
JXD23B400
125
150
175
200
225
300
400
230V Motors
240V Circuit Breaker Data
Breaker Catalog
Ampere
Type
Number
Rating
BQ3B015
015
BQ3B015
015
BQ3B015
015
BQ
BQ3B015
015
BQ3B015
015
BQ3B020
020
BQ3B030
030
BQ3B050
050
BQ
BQ3B070
070
BQ3B090
090
BQ3B100
100
FXD63B125
125
FXD63B150
150
FXD6
FXD63B175
175
FXD63B200
200
460V Motors
480V Circuit Breaker Data
Breaker
Catalog
Ampere
Type
Number
Rating
ED43B015
015
ED43B015
015
ED43B015
015
ED4
ED43B015
015
ED43B015
015
ED43B015
015
ED43B015
015
ED43B030
030
ED4
ED43B030
030
ED43B040
040
ED43B050
050
FXD63B090
090
FXD63B100
100
FXD6
FXD63B125
125
FXD63B150
150
575V Motors
600V Circuit Breaker Data
Breaker
Catalog
Ampere
Type
Number
Rating
ED63B015
015
ED63B015
015
ED63B015
015
ED6
ED63B015
015
ED63B015
015
ED63B015
015
ED63B015
015
ED63B020
020
ED6
ED63B030
030
ED63B035
035
ED63B050
050
FXD63B060
060
FXD63B070
070
FXD6
FXD63B090
090
FDX63B100
100
—
JXD2
FXD6, FD6
FXD6, FD6
FD6
JD6
FXD6
FXD63B100
FXD6, FD6 FXD63B125
100
125
FXD6, FD6 FD63B175
175
FXD6, FD6
OR JD6
FXD6 or
JD6
JD6
JD6
FXD63B200
JD63B200
FXD63B225
JD63B225
JD63B300
JD63B400
200
200
225
225
300
400
JD6
JD63B400
400
LD6 or
LMD6
LD6 or
LMD6
LMD6
LD63B500 or
LMD63B500
LD63B600 or
LMD63B600
LMD63B800
500
—
JXD23B350
—
350
400
FXD63B150
FXD63B200
FD63B250
JD63B250
150
200
250
250
JXD2
JXD23B400
400
JXD2
JXD23B400
LD63B600
LMD63B600
LD63B600 or
LMD63B600
LMD63B800
—
600
LD6 or
LMD6
JD6
JD63B300
300
600
LMD6
600
JD6
JD63B300
300
800
—
LMD6
—
LD63B500 or
LMD63B500
LD63B600 or
LMD63B600
LMD63B800
—
500
200
250
LD6 or
LMD6
LD6 or
LMD6
LMD6
—
800
—
—
—
—
—
—
—
JD63B350
JD63B400
LD63B600 or
LMD63B600
350
400
300
JD6
JD6
LD6 or
LMD6
LMD6
LMD63B700
700
125
150
600
350
—
—
—
—
—
—
400
—
—
—
—
—
—
LMD6
LMD63B800
800
500
—
—
—
—
—
—
—
—
—
The
selection of breakers for this table is in accordance with
Article 430, 2005 National Electric Code. Recommended
circuit breakers are for full voltage starting, special
consideration is necessary for reduced voltage starting.
6-68
For
panelboard applications, substitute the BL breaker for
the BQ, ED2 circuit breakers may also be used.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
For
600
800
non-interchangeable trip applications, substitute the
FXD6 for the FD6, the JXD6 for the JD6, or the LXD6 for
the LD6.
Molded Case Circuit Breakers
Adjustable Installments Magnetic Trip Settings
Breaker
Type
ED6
CED6
FXD6-A
HHFD6
CFD6
Trip Range
3
4
6
7.5
15
19
23
30
36
46
70
85
125
155
185
235
255
325
410
520
740
890
920
1100
6
7.5
15
19
23
30
36
46
70
85
125
155
185
235
255
325
410
520
740
890
920
1100
690
730
690
730
690
730
840
920
840
920
1000
1100
520
580
1000
1100
1500
1700
1210
1370
1210
1370
1500
1700
1500
1700
690
730
690
730
690
730
840
920
840
920
1000
1100
1000
1100
1210
1370
1210
1370
1500
1700
1500
1700
690
730
690
730
690
730
840
920
840
920
1000
1100
1000
1100
1210
1370
1210
1370
1500
1700
1500
1700
690
730
690
730
690
730
840
920
840
920
1000
1100
1000
1100
1210
1370
1210
1370
1500
1700
1500
1700
690
730
690
730
690
730
840
920
840
920
1000
1100
520
580
1000
1100
1500
1700
1210
1370
1210
1370
1500
1700
1500
1700
Note: Tolerances for instantaneous trip points meet UL 489
(7.3). Nominal AC instantaneous trip points are given
in the tables. For DC instantaneous trip points, add 15%
to nominal values.
5
6
7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
770
770
770
990
990
1200
640
1200
1900
1520
1520
1900
1900
770
770
770
990
990
1200
1200
1520
1520
1900
1900
770
770
770
990
990
1200
1200
1520
1520
1900
1900
770
770
770
990
990
1200
1200
1520
1520
1900
1900
770
770
770
990
990
1200
640
1200
1900
1520
1520
1900
1900
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
810
810
810
1060
1060
1300
700
1300
2100
1780
1780
2100
2100
810
810
810
1060
1060
1300
1300
1780
1780
2100
2100
810
810
810
1060
1060
1300
1300
1780
1780
2100
2100
810
810
810
1060
1060
1300
1300
1780
1780
2100
2100
810
810
810
1060
1060
1300
700
1300
2100
1780
1780
2100
2100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
850
850
850
1140
1140
1400
760
1400
2300
1930
1930
2300
2300
850
850
850
1140
1140
1400
1400
1930
1930
2300
2300
850
850
850
1140
1140
1400
1400
1930
1930
2300
2300
850
850
850
1140
1140
1400
1400
1930
1930
2300
2300
850
850
850
1140
1140
1400
760
1400
2300
1930
1930
2300
2300
High
9
22
35
54
100
180
270
375
600
1000
1250
9
22
35
54
100
180
270
375
600
1000
1250
900
900
900
1200
1200
1500
820
1500
2500
2000
2000
2500
2500
900
900
900
1200
1200
1500
1500
2000
2000
2500
2500
900
900
900
1200
1200
1500
1500
2000
2000
2500
2500
900
900
900
1200
1200
1500
1500
2000
2000
2500
2500
900
900
900
1200
1200
1500
820
1500
2500
2000
2000
2500
2500
ETI Motor Circuit Protector
Catalog Number
3-Pole
ED63A001
ED63A002
ED63A003
ED63A005
ED63A010
ED63A025
ED63A030
ED63A040
ED63A050
ED63A100
ED63A125
CED63A001■
CED63A002■
CED63A003■
CED63A005■
CED63A010■
CED63A025■
CED63A030■
CED63A040■
CED63A050
CED63A100
CED63A125
—
—
—
—
—
—
FXD63L150
FXD63A150
FXD63H150
—
—
—
FXD63A250
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CFD63L150
CFD63A150
CFD63H150
—
—
—
CFD63A250
Instantaneous trip adjustment is made through the
breaker cover on all frame breakers. To change instantaneous trip point on circuit breaker, depress indicating
knob, then rotate to desired position.
Thermal Magnetic
Catalog Number
2-Pole
3-Pole
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
FXD62B070
FXD63B070
FXD62B080
FXD63B080
FXD62B090
FXD63B090
FXD62B100
FXD63B100
FXD62B110
FXD63B110
FXD62B125
FXD63B125
—
—
FXD62B150
FXD63B150
—
—
FXD62B175
FXD63B175
FXD62B200
FXD63B200
FXD62B225
FXD63B225
FXD62B250
FXD63B250
FD62B070
FD63B070
FD62B080
FD63B080
FD62B090
FD63B090
FD62B100
FD63B100
FD62B110
FD63B110
FD62B125
FD63B125
FD62B150
FD63B150
FD62B175
FD63B175
FD62B200
FD63B200
FD62B225
FD63B225
FD62B250
FD63B250
HFD62B070
HFD63B070
HFD62B080
HFD63B080
HFD62B090
HFD63B090
HFD62B100
HFD63B100
HFD62B110
HFD63B110
HFD62B125
HFD63B125
HFD62B150
HFD63B150
HFD62B175
HFD63B175
HFD62B200
HFD63B200
HFD62B225
HFD63B225
HFD62B250
HFD63B250
—
HHFD63B070
—
HHFD63B080
—
HHFD63B090
—
HHFD63B100
—
HHFD63B110
—
HHFD63B125
—
HHFD63B150
—
HHFD63B175
—
HHFD63B200
—
HHFD63B225
—
HHFD63B250
CFD62B070
CFD63B070
CFD62B080
CFD63B080
CFD62B090
CFD63B090
CFD62B100
CFD63B100
CFD62B110
CFD63B110
CFD62B125
CFD63B125
—
—
CFD62B150
CFD63B150
—
—
CFD62B175
CFD63B175
CFD62B200
CFD63B200
CFD62B225
CFD63B225
CFD62B250
CFD63B250
■ Built to order. Allow 2–3 weeks for delivery.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-69
MOLDED CASE
CIRCUIT BREAKERS
HFD6
Nominal
AC Adjustable
Low
2
2.6
4.5
7
11
10
17
16
26
30
50
55
90
80
135
115
185
180
300
315
540
500
720
2.6
4.5
7
11
10
17
16
26
30
50
55
90
80
135
115
185
180
300
315
540
500
720
600
640
600
640
600
640
700
770
700
770
800
900
400
460
800
900
1100
1300
900
1060
900
1060
1100
1300
1100
1300
600
640
600
640
600
640
700
770
700
770
800
900
800
900
900
1060
900
1060
1100
1300
1100
1300
600
640
600
640
600
640
700
770
700
770
800
900
800
900
900
1060
900
1060
1100
1300
1100
1300
600
640
600
640
600
640
700
770
700
770
800
900
800
900
900
1060
900
1060
1100
1300
1100
1300
600
640
600
640
600
640
700
770
700
770
800
900
400
460
800
900
1100
1300
900
1060
900
1060
1100
1300
1100
1300
6
FD6-A
Maximum
Continuous
Amperes
1
2
3
5
10
25
30
40
50
100
125
1
2
3
5
10
25
30
40
50
100
125
70
80
90
100
110
125
150
150
150
175
200
225
250
70
80
90
100
110
125
150
175
200
225
250
70
80
90
100
110
125
150
175
200
225
250
70
80
90
100
110
125
150
175
200
225
250
70
80
90
100
110
125
150
150
150
175
200
225
250
Application
Molded Case Circuit Breakers
Adjustable Instantaneous Magnetic Trip Settings
Breaker
Type
JXD2(A)
JXD6(A)
JD6(A)
HJD6(A)
HHJD6
MOLDED CASE
CIRCUIT BREAKERS
6
CJD6
LXD6(A)
LD6(A)
HLD6(A)
HHLD6
CLD6
LMXD6
LMD6
6-70
Maximum
Continuous
Amperes
200
225
250
300
350
400
200
225
250
300
350
400
200
225
250
300
350
400
400
200
225
250
300
350
400
200
225
250
300
350
400
200
225
250
300
350
400
400
450
500
600
250
300
350
400
450
500
600
600
250
300
350
400
450
500
600
250
300
350
400
450
500
600
250
300
350
400
450
500
600
600
500
600
700
800
800
500
600
700
800
Nominal
AC Adjustable
Low
2
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
2000
2290
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
2000
2290
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
1250
1430
2000
2290
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
2000
2290
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
2000
2290
1250
1430
1250
1430
1250
1430
1250
1430
2000
2290
2000
2290
1250
1450
2000
2290
3000
3430
3000
3430
1250
1430
1250
1430
2000
2290
2000
2290
2000
2290
3000
3430
2000
2290
3000
3430
1250
1430
1250
1430
2000
2290
2000
2290
2000
2290
3000
3430
3000
3430
1250
1430
1250
1430
2000
2290
2000
2290
2000
2290
3000
3430
3000
3430
1250
1430
1250
1430
2000
2290
2000
2290
2000
2290
3000
3430
2000
2290
3000
3430
3000
3430
3000
3430
3200
3500
2800
3100
3200
3500
3000
3430
3000
3430
3200
3500
3200
3500
Trip Range
3
4
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
2570
2860
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
2570
2860
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
1610
1790
2570
2860
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
2570
2860
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
2570
2860
1610
1790
1610
1790
1610
1790
1610
1790
2570
2860
2570
2860
1610
1790
2570
2860
3860
4290
3860
4290
1610
1790
1610
1790
2570
2860
2570
2860
2570
2860
3800
4290
2570
2860
3800
4290
1610
1790
1610
1790
2570
2860
2570
2860
2570
2860
3860
4290
3860
4290
1610
1790
1610
1790
2570
2860
2570
2860
2570
2860
3860
4290
3860
4290
1610
1790
1610
1790
2570
2860
2570
2860
2570
2860
3860
4290
2570
2860
3860
4290
3860
4290
3860
4290
3700
4200
3400
3700
3700
4200
3860
4290
3860
4290
3700
4200
3700
4200
5
1960
1960
1960
1960
3140
3140
1960
1960
1960
1960
3140
3140
1960
1960
1960
1960
3140
1960
3140
1960
1960
1960
1960
3140
3140
1960
1960
1960
1960
3140
3140
1960
1960
1960
1960
3140
3140
1960
3140
4710
4710
1960
1960
3140
3140
3140
4710
3140
4710
1960
1960
3140
3140
3140
4710
4710
1960
1960
3140
3140
3140
4710
4710
1960
1960
3140
3140
3140
4710
3140
4710
4710
4710
4700
4000
4700
4710
4710
4700
4700
6
2140
2140
2140
2140
3430
3430
2140
2140
2140
2140
3430
3430
2140
2140
2140
2140
3430
2140
3430
2140
2140
2140
2140
3430
3430
2140
2140
2140
2140
3430
3430
2140
2140
2140
2140
3430
3430
2140
3430
5140
5140
2140
2140
3430
3430
3430
5140
3430
5140
2140
2140
3430
3430
3430
5140
5140
2140
2140
3430
3430
3430
5140
5140
2140
2140
3430
3430
3430
5140
3430
5140
5140
5140
6400
4800
6400
5140
5140
6400
6400
7
2320
2320
2320
2320
3710
3710
2320
2320
2320
2320
3710
3710
2320
2320
2320
2320
3710
2320
3710
2320
2320
2320
2320
3710
3710
2320
2320
2320
2320
3710
3710
2320
2320
2320
2320
3710
3710
2320
3710
5570
5570
2320
2320
3710
3710
3710
5570
3710
5570
2320
2320
3710
3710
3710
5570
5570
2320
2320
3710
3710
3710
5570
5570
2320
2320
3710
3710
3710
5570
3710
5570
5570
5570
7300
5500
7300
5570
5570
7300
7300
Application
High
2500
2500
2500
2500
4000
4000
2500
2500
2500
2500
4000
4000
2500
2500
2500
2500
4000
2500
4000
2500
2500
2500
2500
4000
4000
2500
2500
2500
2500
4000
4000
2500
2500
2500
2500
4000
4000
2500
4000
6000
6000
2500
2500
4000
4000
4000
6000
4000
6000
2500
2500
4000
4000
4000
6000
6000
2500
2500
4000
4000
4000
6000
6000
2500
2500
4000
4000
4000
6000
4000
6000
6000
6000
8000
6000
8000
6000
6000
8000
8000
ETI Motor Circuit Protector
Catalog Number
3-Pole
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
JXD63L400
JXD63H400
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CJD63H400
CJD63L400
—
—
—
—
—
—
—
—
—
LXD63L600
LXD63H600
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CLD63L600
CLD63H600
—
—
—
LMXD63L800
LMXD63A800
—
—
—
—
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Thermal Magnetic
Catalog Number
2-Pole
3-Pole
JXD22B200
JXD23B200
JXD22B225
JXD23B225
JXD22B250
JXD23B250
JXD22B300
JXD23B300
JXD22B350
JXD23B350
JXD22B400
JXD23B400
JXD62B200
JXD63B200
JXD62B225
JXD63B225
JXD62B250
JXD63B250
JXD62B300
JXD62B300
JXD62B350
JXD23B350
JXD62B400
JXD23B400
JD62B200
JD63B200
JD62B225
JD63B225
JD62B250
JD63B250
JD62B300
JD63B300
JD62B350
JD63B350
—
—
JD62B400
JD63B400
HJD62B200
HJD63B200
HJD62B225
HJD63B225
HJD62B250
HJD63H250
HJD62B300
HJD63B300
HJD62B350
HJD63B350
HJD62H400
HJD63B400
HHJD62B200 HHJD63B200
HHJD62B225 HHJD63B225
HHJD62B250 HHJD63B250
HHJD62B300 HHJD63B300
HHJD62B350 HHJD63B350
HHJD62B400 HHJD63B400
—
CJD63B200
—
CJD63B225
—
CJD63B250
—
CJD63B300
—
CJD63B350
—
CHD63B400
—
—
LXD62B450
LXD63B450
LXD62B500
LXD63B500
LXD62B600
LXD63B600
LD62B250
LD63B250
LD62B300
LD63B300
LD62B350
LD63B350
LD62B400
LD63B400
LD62B450
LD63B450
LD62B500
LD63B500
—
—
LD62B600
LD63B600
HLD62B250
HLD63B250
HLD62B300
HLD63B300
HLD62B350
HLD63B350
HLD62B400
HLD63B400
HLD62B450
HLD63B450
HLD62B500
HLD63B500
HLD62B600
HLD63B600
HHLD62B250 HHLD63B250
HHLD62B300 HHLD63B300
HHLD62B350 HHLD63B350
HHLD62B400 HHLD63B400
HHLD62B450 HHLD63B450
HHLD62B500 HHLD63B500
HHLD62B600 HHLD63B600
—
CLD63B250
—
CLD63B300
—
CLD63B359
—
CLD63B400
—
CLD63B450
—
CLD63B500
—
—
—
CLD63B600
—
LMXD63B500
LMXD62B600 LMXD63B600
LMXD62B700 LMXD63B700
—
—
LMXD62B800 LMXD63B800
LMD62B500
LMD63B500
LMD62B600
LMD63B600
LMD62B700
LMD63B700
LMD62B800
LMD63B800
Molded Case Circuit Breakers
Adjustable Instantaneous Magnetic Trip Settings
Breaker
Type
HLMXD6
HLMD6
MD6
MXD6
HMD6
HMXD6
CMD6
HND6
HNXD6
CND6
PD6
PXD6
HPD6
HPXD6
CPD6
RD6
RXD6
HRD6
HRXD6
5
4710
4710
4700
4700
4710
4710
4700
4700
4710
4710
6280
4710
6280
7860
4710
4710
6280
4710
6280
7860
4710
4710
6280
6280
4710
4710
6280
6280
4710
4710
4710
6280
4710
6280
7860
6280
7860
7860
7860
7860
7860
7860
6280
7860
7860
7860
7860
7860
7860
6280
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
7860
6
5140
5140
6400
6400
5140
5140
6400
6400
5140
5140
6850
5140
6850
8575
5140
5140
6850
5140
6850
8575
5140
5140
6850
6850
5140
5140
6850
6850
5140
5140
5140
6850
5140
6850
8575
6850
8575
8575
8575
8575
8575
8575
6850
8575
8575
8575
8575
8575
8575
6850
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
8575
7
5570
5570
7300
7300
5570
5570
7300
7300
5570
5570
7420
5570
7420
9290
5570
5570
7420
5570
7420
9290
5570
5570
7420
7420
5570
5570
7420
7420
5570
5570
5570
7420
5570
7420
9290
7420
9290
9290
9290
9290
9290
9290
7420
9290
9290
9290
9290
9290
9290
7420
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
9290
High
6000
6000
8000
8000
6000
6000
8000
8000
6000
6000
8000
6000
8000
10000
6000
6000
8000
6000
8000
10000
6000
6000
8000
8000
6000
6000
8000
8000
6000
6000
6000
8000
6000
8000
10000
8000
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
ETI Motor Circuit Protector
Catalog Number
3-Pole
—
—
—
—
—
—
—
—
—
—
—
MXD63L800
MXD63A800
MXD63H800
—
—
—
MXD63L800
MXD63A800
MXD63H800
—
—
—
—
—
—
—
—
—
—
—
—
CMD63L800
CMD63A800
CMD63H800
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Thermal Magnetic
Catalog Number
2-Pole
3-Pole
—
HLMXD63B500
—
HLMXD63B600
—
HLMXD63B700
—
HLMXD63B800
HLMD62B500
HLMD63B500
HLMD62B600
HLMD63B600
HLMD62B700
HLMD63B700
HLMD62B800
HLMD63B800
MD62B500
MD63B500
MD62B600
MD63B600
MD62B700
MD63B700
—
—
MD62B800
MD63B800
—
—
MXD62B500
MXD63B500
MXD62B600
MXD63B600
MXD62B700
MXD63B700
—
—
MXD62B800
MXD63B800
—
—
HMD62B500
HMD63B500
HMD62B500
HMD63B600
HMD62B700
HMD63B700
HMD62B800
HMD63B800
—
HMXD63B500
—
HMXD63B600
—
HMXD63B700
—
HMXD63B800
—
CMD63B400
—
CMD63B500
—
CMD63B600
—
CMD63B700
—
—
—
CMD63B800
—
—
ND62B800
ND63B800
ND62B900
ND63B900
ND62B100
ND63B100
ND62B120
ND63B120
NXD62B900
NXD63B900
NXD62B100
NXD63B100
NXD62B120
NXD63B120
HND62B800
HND63B800
HND62B900
HND63B900
HND62B100
HND63B100
HND62B120
HND63B120
—
HNXD63B900
—
HNXD63B100
—
HNXD63B120
—
CND63B800
—
CND63B900
—
CND63B100
—
CND63B120
—
PD63B120
—
PD63B140
—
PD63B160
—
PXD63B120
—
PXD63B140
—
PXD63B160
—
HPD63B120
—
HPD63B140
—
HPD63B160
—
HPXD63B120
—
HPXD63B140
—
HPXD63B160
—
CPD63B120
—
CPD63B140
—
CPD63B160
—
RD63B180
—
RD63B200
—
RXD63B180
—
RXD63B200
—
HRD63B180
—
HRD63B200
—
HRXD63B180
—
HRXD63B200
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-71
MOLDED CASE
CIRCUIT BREAKERS
NXD6
Nominal
AC Adjustable Trip Range
Low
2
3
4
3000
3430
3860
4290
3000
3430
3860
4290
3200
3500
3700
4200
3200
3500
3700
4200
3000
3430
3860
4290
3000
3430
3860
4290
3200
3500
3700
4200
3200
3500
3700
4200
3000
3430
3860
4290
3000
3430
3860
4290
4000
4570
5140
5710
3000
3430
3860
4280
4000
4570
5140
5710
5000
5715
6430
7145
3000
3430
3860
4280
3000
3430
3860
4280
4000
4570
5140
5710
3000
3430
3860
4280
4000
4570
5140
5710
5000
5715
6430
7145
3000
3430
3860
4280
3000
3430
3860
4280
4000
4570
5140
5710
4000
4570
5140
5710
3000
3430
3860
4280
3000
3430
3860
4280
4000
4570
5140
5710
4000
4570
5140
5710
3000
3430
3860
4280
3000
3430
3860
4280
3000
3430
3860
4280
4000
4570
5140
5710
3000
3430
3860
4280
4000
4570
5140
5710
5000
5715
6430
7145
4000
4570
5140
5710
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
4000
4570
5140
5710
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
4000
4570
5140
5710
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
5000
5715
6430
7145
6
ND6
Maximum
Continuous
Amperes
500
600
700
800
500
600
700
800
500
600
700
800
800
800
500
600
700
800
800
800
500
600
700
800
500
600
700
800
400
500
600
700
800
800
800
800
900
1000
1200
900
1000
1200
800
900
1000
1200
900
1000
1200
800
900
1000
1200
1200
1400
1600
1200
1400
1600
1200
1400
1600
1200
1400
1600
1200
1400
1600
1800
2000
1800
2000
1800
2000
1800
2000
Application
Molded Case Circuit Breakers
Molded Case Switch — Circuit Disconnect
Maximum
Frame
Amp Rating
1100
2-Pole
Catalog
Number
BQ2S060 ■
BQ2S100■
Selection
3-Pole
List
Price $
76.00
203.00
Catalog
Number
BQ3S060■
BQ3S100■
List
Price $
351.00
351.00
11000
11000
488.00
742.00
1495.00
895.00
1707.00
3251.00
4665.00
900.00
1962.00
11000
11000
11000
11000
11000
11000
11000
11250
11250
1125
ED22S100A■
ED42S100A■
ED42S125A■
ED62S100A■
—
CED62S100A■
CED62S125A■
—
—
1225
QJ22S225A■
991.00
12000
1250
FXD62S250A
HFXD62S250A■
1622.00
2823.00
——
FXD63S250A
HFXD63S250A■
CFD63S250A■
1966.00
3422.00
6312.00
13200
13200
13200
JXD22S400A■
—
—
2050.00
——
——
——
JXD23S400A
JXD63S400A
HJXD63S400A■
CJD63S400A■
2529.00
3452.00
5824.00
7195.00
16000
16000
16000
16000
—
—
——
——
——
LXD63S600A
HLXD63S600A■
CLD63S600A■
4968.00
6644.00
11686.00
18000
18000
18000
—
—
——
——
——
LMXD63S800A■
MXD63S800A
CMD63S800A
5708.00
5708.00
13259.00
10000
10000
10000
1200
—
——
——
NXD63S120A
CND63S120A■
10082.00
18932.00
10000
10000
1600
——
PXD63S160A
14902.00
10000
2000
——
RXD63S200A■
16508.00
1400
1600
1800
288.00
605.00
1157.00
698.00
——
2600.00
3924.00
——
——
306.00
ED23S100A
ED43S100A
ED43S125A
ED63S100A
ED63S125A
CED63S100A■
CED63S125A■
HES3S100L
HES3S125L
QJ23S225A
6
MOLDED CASE
CIRCUIT BREAKERS
——
TD63S2000■
21709.00
50kA
2500
——
TD63S2500■
24441.00
50kA
3200
——
TD63S3200■
26897.00
50kA
4000-5000
See “SB” Type Insulated Case Breakers
For 2-pole application use outside poles of 3-pole circuit
breaker.
For additional lugs see pages 6-81 to 6-83.
6-72
Order by catalog number. Switches
include frame and self protective
(except TD) trip unit only. Order lugs
separately from pages 6-81 to 6-83.
10000
2000
■ Built to order. Allow 2–3 weeks for delivery.
Ordering Information
Withstand
Non Automatic Molded Case Switch
Self-Protective
Instantaneous
Override ±20%
Molded case switches up to R frame contain a self
protecting instantaneous element, which may open
circuit above their override set point.
UL file E57556 Volume 1, section 2 and
CSA LR 42022-51.
Requires mounting block MB9301 or MBR9302.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lugs pages 6-81 to 6-83
Enclosures Section 5
Accessories pages 6-86 to 6-91
Discount Schedule MCCB
Molded Case Circuit Breakers
Digital Solid State Sentron Sensitrip III Series
The Sentron Sensitrip III circuit
Functions available in Sentron Sensitrip circuit breakers
breaker is a true RMS current sensing
Cont
Long
InstanShort
device. Digital microprocessor
Trip
Current Time
taneous Time
circuitry within the electronic trip unit Catalog Number
(Description + Suffix) Type Setting Delay Setting
Pick Up
provides more precise control over
Basic Unit + (A)
LI
⻫
⻫
⻫
the circuit breaker functions. This
Basic Unit + (A)G
LIG
⻫
⻫
⻫
control allows circuit coordination
Basic Unit + (A)NT
LSI
⻫
⻫
⻫
⻫
flexibility not available with thermal
Basic Unit + (A)NGT
LSIG ⻫
⻫
⻫
⻫
magnetic circuit breakers.
Technical
Short
Time
Delay
Short
Time
l2t
Pick Up
⻫
⻫
⻫
⻫
Ground
Fault
Pick Up
Ground
Fault
Delay
⻫
⻫
⻫
⻫
Letter “A” is used for MD and ND Solid State frame types only.
Typical Trip Unit Labeling and Adjustment Positions for the Sentron Sensitrip Circuit Breaker.
SMD6, SHMD6, SCMD6, SND6, SHND6, SCND6, SPD6, SHPD6
SJD6, SHJD6, SCJD6, SCD6, SHLD6, SCLD6
6
MOLDED CASE
CIRCUIT BREAKERS
ln = Maximum circuit breaker ampere
rating.
lr = Current Rating — a function of
continuous ampere adjustment
setting expressed in % of ln .
lg = Ground Fault Pickup — a function
of adjustment setting expressed in
% of ln .
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-73
Molded Case Circuit Breakers
Digital Solid State Sentron Sensitrip III Series
Technical
D. Adjustable “Short Time
Pick-Up” Switch (Optional)
A. Adjustable “Continuous
Amps” Rating Switch
Sensitrip III circuit breakers
with an adjustable short time
pick-up switch allow for
selection of short time
pick-up in a range from 1.5
to 10 times the setting of the
maximum current rating.
All Sensitrip III solid state
molded case circuit breakers
have an adjustable
ampere rating switch.
Adjustments made to this
switch change the
continuous current rating of
the breaker from 20% to
100% of its maximum trip
unit rating depending on
the circuit breaker frame.
E. Adjustable “Short Time
Delay” Switch (Optional)
Sensitrip III circuit breakers
with an adjustable short time
pick-up switch also contain a
switch for adjustment in
time delay. The adjustable
short time delay switch
allows for either of two
modes of short time delays.
One range of settings
enables the breaker to be set
for fixed time delays and the
other range of settings
enables the breaker to be set
for short time delays based
on l2t curves.
B. Adjustable “Long Time
Delay” Switch
All Sensitrip III circuit
breakers have an
adjustable long time delay
switch to allow for
selection of long time
delays of fixed time
intervals at six times the
setting of the adjustable
“continuous amps”
rating switch.
C. Adjustable “Instantaneous
Pick-Up” Switch
Sensitrip III circuit breakers
with an adjustable
instantaneous trip switch
allow selection of a tripping
point from related to the
adjusted circuit breaker
Rating (lr).
Sensitrip III circuit breakers
containing the optional equipment
ground fault protection cover the
ground fault pick-up range of 20% to
70% of the circuit breaker frame
rating. The ground fault pick-up
settings also allow for one of three
time delays based on 12t curves.
6
MOLDED CASE
CIRCUIT BREAKERS
Adjustable “Ground Fault Pick-Up”
Switch
For 3-phase, 4-wire systems, an
external neutral transformer is
required with an ampere rating
equal to the trip unit ampere rating.
ln = Maximum circuit breaker ampere rating.
lr = Current Rating — a function of adjustment setting expressed in % of ln.
lg = Ground Fault Pick-up — a function of adjustment setting expressed in % of ln.
Examples of Adjustment Settings
Catalog Number SMD69800A
In = 800
In = 800 amperes
Results
Continuous
Current Setting
Long Time
Delay Setting
Instantaneous
Setting
30
240 amperes
lr = 30% of 800
12
12 seconds trip
at 6 x 240 amps = 1440.
8
1920 amperes
8 x lr = 8 x 240
Catalog Number SMD69800ANGT
ln
lr
Setting
Long
Time
Delay
Short Time
Pick-Up
Off
Instantaneous
Setting
Short Time
Pick-Up
On
Short Time
Delay
l2T
Set
Ground
Fault
Pick-Up
Ground
Fault
Delay
800 amperes
Results
070
560
20
20 sec.
—
—
10 lr
5600A
8 lr
4480A
.5
.5 secs
.28
.28 sec @ 4480A
40
320A
.2
.2 sec
A
쎻
B
쎻
C
쎻
A ln = 800 amperes.
쎻
B lr = 560 amperes (70% of 800).
쎻
C Delay = 20 seconds at 3360 amps (6 x lr).
쎻
Breaker will trip in 20 seconds with 3360
amperes.
D Short Time Pick-Up Off — Instantaneous can be used.
쎻
6-74
D
쎻
E
쎻
F
쎻
G
쎻
H
쎻
I
쎻
J
쎻
E Instantaneous set at 10 x lr = 10 x 560 = 5600
쎻
amperes.
H l2t switch on .28 seconds @ 6 x 560 = 3360 amperes.
쎻
(Inverse time)
F Short Time Pick-Up On — Set at 8 = 8 x 560 = 4480
쎻
amperes.
I Ground Fault Pick-Up set at 40 = 40% of ln = 320
쎻
amperes. (Definite Time)
G Short Time Delay = .5 seconds. (Definite Time)
쎻
G & 쎻
H are mutually exclusive.
Note: 쎻
J Ground Fault Delay set at .2 seconds. Breaker will trip in
쎻
200 milliseconds with a 400 ampere ground fault.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
WL Power Circuit Breakers — Insulated Case
3-pole, up to 5000A
General
Breaker Description
Minimal Space Requirements
The WL design is extremely compact
without sacrificing performance and does
not use energy-wasting heat sinks.
Non-Automatic Switch
A special version of the circuit breaker is
used as a non-automatic switch.
The non-automatic switch is constructed
without a trip unit and has no protective
function. A possible application is for use
as a tie in systems with parallel feeds.
Main Bus Connectors
Breakers are equipped with standard
vertical main bus connections. Horizontal
bus connections are available as an
option in Frame Size 1 and 2 up to
2000A.
Communication Capability
MODBUS or PROFIBUS communications transmit the acquired and metered
data, such as current values, breaker
status, trip log, etc. to a central
monitoring computer. When the optional
metering function is installed, the WL
acquires data useful for power
management and can contribute to a
significant savings in energy costs. A
new, internal circuit breaker bus enables
the expansion of breaker functionality
through the integration of many
secondary functions which were
previously separate, including:
▪ Control of analog displays
▪ Options for testing the
communication setup
▪ Display of breaker status and reason
for trip
▪ Input modules for reading other
external signals and transmitting
these signalsvia PROFIBUS or
MODBUS communication
▪ A selection of output modules to
provide contact closures based on
events or measured-value setpoints.
It is not only possible to monitor the
breaker remotely, it is also possible
to open and close the breaker as well
as setting parameters remotely
▪ Manual operating mechanism with
mechanical and electrically
interlocked closing
▪ Motorized operating mechanism with
mechanical and electrically interlocked
closing. Operating mechanisms with
electrically interlocked closing are
suitable for synchronizing tasks
Auxiliary Contacts
Auxiliary switches can be added according to the type of installation. They are
easily mounted via front, top mounted
terminal blocks.
Modularity
Common guide frames for the draw-out
version make them completely interchangeable between the UL 489 and
ANSI / UL 1066 rated circuit breakers.
Components, such as auxiliary releases,
motorized operating mechanisms, trip
units, current sensors, auxiliary
signal switches, automatic reset devices
or interlocks can be used to modify or
retrofit any circuit breaker to meet
changing requirements. The main contacts can be replaced to extend the life
of the circuit breaker and feature integrated contact wear indicators.
Electronic Trip Unit Modularity
Modularity is the outstanding feature of
the new WL Circuit Breakers. The trip
units themselves can be retrofitted with
special LCDs, ground fault modules,
rating plugs and communication
modules.100% Rated Circuit Breaker WL
circuit breakers are designed for
continuous operation at 100% of their
current rating without the need for
external heat sinks.
Conditions of Application
WL Circuit Breakers are designed to
meet standard Industrial and Commercial
application requirements.
Operating Mechanisms
Circuit breakers can be optionally
delivered with different operating
mechanisms, including:
▪ Manual operating mechanism with
mechanical closing (standard)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-75
MOLDED CASE
CIRCUIT BREAKERS
Standards
▪ WL ANSI / UL 1066 Circuit Breakers
will satisfy: C37.13, C37.16, C37.17,
C37.50, NEMA SG3
▪ WL UL 489 Circuit Breakers will
satisfy: UL 489
▪ WL Circuit Breakers are suitable for
use in UL 1558 LV Switchgear and UL
891 LV Switchboards
Conditions of Application
WL Circuit Breakers are designed to
meet standard Industrial and Commercial
application requirements.
Uniform Dimensions
WL Circuit Breaker dimensions differ
only in the device width, which varies by
frame size. With the exception of the
200kA ANSI Frame Size II which has an
additional 5" in depth to accommodate
integral fuses and the UL489 Frame Size
I which measures only 15" in height to
allow six-high stacking in switchboards.
Trip Units
The electronic, micro processor-based
trip unit is auxiliary voltage-independent
for all protective functions and enables
adaptation to the different protection
requirements of distribution systems,
motors, transformers and generators.
6
The ever-increasing use of plant and
energy management systems has
intensified the demand for circuit
breakers supporting multiple open
protocols to monitor and control the flow
of energy in the power system. The
extensive and modular WL family of
circuit breakers and accessories provides
this for applications from 200A to 5000A.
Applications
WL breakers can be applied as main, tie,
feeder or distribution breakers in
low-voltage electrical power systems.
Versions
▪ Frame ratings: 800A to5000A
▪ 3 physical frame sizes
▪ Rated nominal operating voltage up
to 600VAC
▪ Seven interrupting classes from 50kA
to 200kA at 480V
▪ Circuit breaker or non-automatic switch
▪ WL Circuit Breakers aredelivered as
complete assembled breakers or
individual frames, guide frames, and
accessories
Installation Types
Fixed-mounted or Draw-out version.
WL Power Circuit Breakers — Insulated Case
Electronic Trip Units
Selection criteria for WL Circuit
Breakers
The basic criteria for selecting circuit
breakers is:
▪ Maximum Available Short Circuit
at the installation point. This value
determines the short circuit current
interrupting rating or short circuit
current withstand rating of the circuit
breaker
▪ Rated Current In which is to flow
through the respective circuit breaker
continuously. This value may not be
greater than the maximum rated
current of the circuit breaker. The rated
the rating plug, up to the maximum
frame rating
▪ Ambient Temperature of the circuit
breaker. This is usually the
temperature inside the cubicle
▪ Design of the circuit breaker.
Protective Functions of the circuit
breaker. These are determined by the
selection of the appropriate trip unit
General
Trip Unit Functions
Basic Protective Functions
Long-time overcurrent protection
Short-time delayed overcurrent protection
Instantaneous overcurrent protection
Neutral conductor protection
Ground fault protection
L
S
I
N
G
MOLDED CASE
CIRCUIT BREAKERS
6
Additional Functions
Selectable neutral protection
Defeatable short-time protection
Defeatable instantaneous protection
Selectable thermal memory
Zone selective interlocking
Selectable I2t or fixed short-time delay
Adjustable instantaneous pick-up
Selectable I2t or I4t long-time delay
Adjustable short-time delay and pick-up
Selectable and adjustable neutral protection
Dual protective setting capability
Dynamic arc-flash sentry
Extended instantaneous protection
6-76
ETU727
●
●
●
●
●
●
—
—
●
—
●
●
●
●
—
—
—
—
—
—
—
—
—
—
—
—
●
●
—
—
—
—
—
—
●
●
Parameterization and Displays
Parameterization by rotary switches (10 steps)
Parameterization by communication (absolute values)
Parameterization by menu/keypad (absolute values)
Remote parameterization of the basic functions
Remote parameterization of the additional functions
Alphanumeric LCD
Graphical LCD
●
●
—
—
—
—
—
—
—
—
—
—
—
—
Metering Function
Metering function
Metering function Plus
—
—
—
—
Communication
CubicleBUS
Communication via PROFIBUS-DP
Communication via the MODBUS
Communication via the Ethernet (BDA)
—
—
—
—
—
—
—
—
● Standard
Fixed,
ETU725
— Not available
short-time delay only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Optional
WL Power Circuit Breakers — Insulated Case
Electronic Trip Units
General
Trip Unit Functions
Basic Protective Functions
Long-time overcurrent protection
Short-time delayed overcurrent protection
Instantaneous overcurrent protection
Neutral conductor protection
Ground fault protection
L
S
I
N
G
ETU755
ETU776
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
—
—
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
—
●
●
●
●
●
●
●
●
●
●
●
●
●
●
—
—
—
—
●
●
●
●
●
●
●
●
MOLDED CASE
CIRCUIT BREAKERS
ETU748
●
6
Additional Functions
Selectable neutral protection
Defeatable short-time protection
Defeatable instantaneous protection
Selectable thermal memory
Zone selective interlocking
Selectable I2t or fixed short-time delay
Adjustable instantaneous pick-up
Selectable I2t or I4t long-time delay
Adjustable short-time delay and pick-up
Selectable and adjustable neutral protection
Dual protective setting capability
Dynamic arc-flash sentry
Extended instantaneous protection
ETU745
Parameterization and Displays
Parameterization by rotary switches (10 steps)
Parameterization by communication (absolute values)
Parameterization by menu/keypad (absolute values)
Remote parameterization of the basic functions
Remote parameterization of the additional functions
Alphanumeric LCD
Graphical LCD
●
●
—
—
—
—
—
—
●
●
●
—
—
—
—
●
●
●
●
●
—
—
—
—
—
●
Metering Function
Metering function
Metering function Plus
Communication
CubicleBUS
Communication via PROFIBUS-DP
Communication via the MODBUS
Communication via the Ethernet (BDA)
● Standard
— Not available
●
●
●
●
Optional
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-77
WL Power Circuit Breakers — Insulated Case
MOLDED CASE
CIRCUIT BREAKERS
6
3-Pole, up to 5000A
Rating Plug
It is no longer necessary to replace the
current transformer to change the rated
current of the breaker. Instead, you
simply replace the rating plug which is
easily accessible on the front of the trip
unit. The circuit breaker is set to the new
rated current quickly and is already
correctly labeled.
Long Time Overcurrent Protection
with Switchable I2t/I4t Characteristics
The long time overcurrent
protection in the ETU745, ETU755 and
ETU776 trip units can be switched
between an I2t and I4t characteristic to
improve coordination between upstream
circuit breakers and fuses.
Front Panel
The front panel is designed so that it can
be accessed through a cutout in the
door, which means that all controls and
displays are accessible even when the
cubicle door is closed. The front panels
of all Frame Size II and Frame Size III
circuit breakers are identical, and allow
for two different through-door access
designs: Trip unit and front panel controls
or front panel controls only. The degree
of protection of the front panel is IP 20.
Environmental Protection
The plastics used are halogen-free and
recyclable.
Safety and Reliability
In order to help protect the electrical
distribution system and circuit breaker
against unauthorized breaker operations,
General
a wide range of locking devices can be
installed or retrofit, including:
▪ Lockable drawout version to protect
against unauthorized removal
(standard)
▪ High degree of protection through
Plexiglas cover
▪ Mechanical reclosing lockout after
long-time, short-time or instantaneous
trip (optional)
▪ Devices with trip unit ETU745 or
higher are equipped with temperature
sensors on the BSS and
COM15/COM16 (standard)
▪ Lock provision for locking the breaker
in the OPEN position
▪ Lockable covers for the CLOSE button
▪ Lockable racking handle prevents
moving the breaker
▪ Lockable charging handle prevents
charging the springs
Standard Version Features
WL Circuit Breakers have the following
standard equipment:
▪ Mechanical CLOSE and mechanical
OPEN push buttons
▪ Manual operating mechanism with
mechanical closing
▪ Contact position indicator
▪ Front panel ready-to-close indicator
▪
▪
▪
▪
Dynamic Arc-Flash Sentry (DAS) employs
the unique dual protective setting capability of the 755 and 776 trip units, coupled with the ability to easily toggle to a
lower arc flash parameter set. A normal
operation parameter set can be optimized for selective trip coordination,
while the second set is optimized for
lower arc flash energy levels. The
dynamic action comes from the ability to
switch from the normal operation set to
the arc flash limiting set based on the
presence of personnel as they approach
the flash protection boundary. A wide
variety of switching methods may be
used based on the needs of a particular
facility. The capabilities range from fully
automatic switching using appropriate
occupancy sensors to manual switching
via a key operation.
Extended Instantaneous Protection
(Patent Pending)
Extended Instantaneous protection (EIP),
another unique feature of the WL trip
unit, allows the system designer to
achieve full selective trip coordination up
to the short-time rating of the frame
while also allowing application of the
breaker up to the interrupting rating of
the frame. The typical power circuit
breaker with an 'LS' trip unit, or when
the instantaneous function is switched
off on an 'LSI' trip unit, can only be
applied up to it's short-time rating,
commonly 85kA or less. For application
on systems with levels of available fault
current above the short-time rating, the
typical 'LS' power circuit breaker cannot
be applied or must employ an instantaneous override. This instantaneous
override is set at as much as 20% below
the short-time rating and can seriously
compromise selective trip coordination
with downstream breakers.
The WL, equipped with EIP, overcomes
these limitations by providing full
withstand capability, and full coordination, with a minus 0% short-time band
tolerance up to 85kA on frame Size II
and 100kA on Size III. Above fault currents of 20% higher than the full shorttime rating, the WL breaker is self-protecting, and the EIP function will trip the
breaker instantly to protect the frame
and the system from these extremely
high currents, as high as 150kA on frame
Size III. One added benefit is that arc
flash energy is greatly reduced in this
high current region due to the instantaneous trip response that EIP provides.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Spring charge indicator
Rear vertical main contacts
Main contact replacement flag
Auxiliary plug system with bare wire
pressure screw terminals. Delivery
includes all auxiliary plugs necessary for
both factory installed and future field
installed accessories
Mechanical trip indicator of the
overcurrent release system
Automatic reset after trip
The front panel cannot be removed if
the circuit breaker closed
Laminated main contact fingers as part
of the breaker contact strip on
the drawout circuit breaker
Breaker position display in the
operator’s panel
Captive crank handle for racking out
the breaker
Guide frame with guide rails for easy
handling of draw-out version
Breaker cannot be moved in the
CLOSED state
Rated current coding between the
guide frame and the breaker
Suitable for reverse feed applications
The breaker is always equipped with
the required number of secondary
disconnect blocks
Exclusive Features
Generator/Utility
Protection Sets
24/7/365 power availability is critical for
some systems. On-site generation capability is growing more and more common
in many systems. All of the WL digital
electronic trip units allow the system
designer to precisely tailor trip settings
for the most demanding requirements.
However, the 755 and 776 trip units
allow one set of trip settings for a fully
loaded utility feed and with a simple contact closure, the trip unit toggles to a
second trip set tailored to provide optimal generator protection. The wide
range of settings allows the WL to provide protection for a minimal generator
capacity for only essential loads, through
full backup for an entire facility. This dual
utility/generator protection capability in a
single circuit breaker allows the system
designer unparalleled, cost effective,
flexibility.
Dynamic Arc-Flash Sentry
(Patent Pending)
A unique feature of the WL trip unit
allows the system designer to achieve
lower levels of arc flash energy and
delayed tripping for selective trip
coordination purposes.
6-78
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Electronic and Communications Accessories
Selection
Electronic & Display Devices
Local Display Unit
Breaker Type
Catalog Number
SJD, SLD, SMD, SND, SPD, SB, STD
LDU-100
List Price $
SADU Ammeter Display Unit
1343.00
The Local Display Unit (LDU) provides a centralized read-out of all Sensitrip III and SB
ICCB breakers. The device provides a panel mountable display for all trip unit data
including phase currents and alarms for up to 32 breakers. Also communicates with
other ACCESS™ devices.
Trip Unit Test Set
Type
Catalog Number
List Price $
SJD, SLD, SMD, SND, SPD, SB, STD, Portable
TS31
13835.00
Spare TS-31 Test Set Interconnecting Cable
TS31CABLE
188.00
The TS-31 test set is used to test the operation of the fault protection functions of the
circuit breaker's trip unit, including long-time, short-time, instantaneous, and ground
fault by means of secondary current injections.
Sensitrip Ammeter Display Unit
Breaker Type
Catalog Number
SJD, SLD, SMD
SADU
SND, SPD
SADURMK18
List Price $
1776.00
342.00
SB Energy Display
Trip Unit Powered & Battery back-up
2 x 16 LCD Alphanumeric Display*
Ammeter Display Functions
— RMS Phase Currents
— Average Current*
— Current Demand*
— Ground Current
— Current Unbalance (%)*
▪ Breaker Status
— Normal
— Impending Trip*
▪ Time Stamped Trip Log (last 5)
— Time & Date*
— Trip Cause: LT, ST, GF, SC
▪ Max Log (with date & time)
— Max Phase Current*
— Max Average Current*
— Max Ground Current*
— Max Unbalance Current*
— Max Current Demand*
* Unique Features
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-79
MOLDED CASE
CIRCUIT BREAKERS
SADU Plug-in Mounting
Direct plug-in or Panel Mounting*
6
The Sensitrip Ammeter Display Unit (SADU) provides real-time metering for all
Sentron-Sensitrip III Molded Case Circuit Breakers. The unit plugs directly onto the
front of the trip unit and provides displays for individual phase currents flowing through
the breaker. Additional features include Average, Demand, Ground and Unbalance
Current displays, along with impending Trip Status. Current Metering Logs, and a
unique diagnostic Trip Log that records the date, time and type of fault for the
previous five breaker trips. The device is UL and CSSA certified.
The optional panel mount accessory (SADURMK18) allows easy device mounting
external from the circuit breaker, in panelboard and switchboard spaces or gutters,
with the flexibility of interior panel exterior panel, or wall mounting capability.
The 2 x 16 alphanumeric LCD display provides easy viewing of data, such as
viewing all three phase currents simultaneously.
▪
▪
▪
▪
Molded Case Circuit Breakers
Communications Accessories
Selection
Multiplexor Translator
Breaker Type
Features
SJD, SLD
SMD, SND
SPD, STD
SBA, SBS, SBH
Zone Interlocking Only
Catalog No
MTZ
List Price $
1946.00
Full Communications
with Zone Interlocking
MTA
4334.00
The Multiplexor Translator MTZ is an interface device required in zone
selective interlock schemes. The MTA combines the zone selective
interlocking function with interface to ACCESS® Systems.
Cables & Connectors
Ribbon Cables
Breaker Type
Length
SJD, SLD
SMD, SND
SPD, STD
SBA, SBS, SBH
06"
08"
12"
18"
24"
Catalog No
List Price $
EPC06
EPC08
EPC12■
EPC18
EPC24■
59.00
59.00
79.00
96.00
124.00
List Price $
MOLDED CASE
CIRCUIT BREAKERS
6
Telephone Cables
ACCESS™ Communications 햲
Siemens electronic trip units feature two levels of
communication: Zone Selective Interlocking and ACCESS™
System Open-protocol communications. The trip units are fully
equipped for direct integration into ACCESS™ or compatible
communication systems.
A multiplexor/Translator (MTA) and Expansion Plug area required
for the TYPE “TL” and Sensitrip trip units when full Access™
communications is specified. The MTA also has Zone Selective
Interlocking capability. Refer to Bulletin IPIM-2211A and
Instruction Sheet Pc. No. 411152A00 for additional information.
Siemens WinPM.net power monitoring software delivers a
powerful energy management system providing sophisticated
monitoring capability to a host computer and other components
in the electrical distribution system at an affordable cost. It also
provides process control, including peak demand, trend analysis,
waveform analysis, and harmonic calculations and displays.
These functions help pinpoint energy consumption, power quality
issues, and the energy cost of any process. Outages and potential
outages can be quickly diagnosed and plans can be generated for
expansion and preventative plant maintenance. Refer to Bulletins
IPIM-2211A for additional information.
Communications is accomplished via RS-485 twisted pair wire or
modem, providing communications to a remote site and allowing
access to multiple plants. With integration of an Access™
Siemens Power Interface (SPI), communication with Modbus
networks is enabled. This part provides the ability to communicate
directly to a PC with WinPM.net or any Modbus master.
The SB-EC Trip Unit’s RS-232 communications port provides
additional PC communications for available trip unit data displays
and trip unit configuration via Siemens SBWin™ software.
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
6-80
Breaker Type
Length
Catalog No
SB
STD
08'
15'
25'
50'
MTCSB08 ▲
MTCSB15 ▲
MTCSB25 ▲
MTCSB50 ▲
79.00
118.00
155.00
155.00
SJD, SLD
SMD, SND,
SPD,
SBA, SBS, SBH
8'
15'
25'
50'
MTC08
MTC15
MTC25
MTC50
79.00
118.00
155.00
155.00
The Expansion Plug EP is a required isolating device to connect the breaker
with the Multiplexor Translator. It is connected to the trip unit on the
breaker with a “Ribbon Cable”, EPC08 e.g., and the Multiplexor Translator
with the “Telephone Cable” (an RJ-11 cable) MTCSB08 e.g.
Expansion Plug Selection Guide
Breaker
Type
Frame
Size
Mounting
Type
Catalog
Number
List
Price $
SB ICCB and
STD
1200A,
2000A
Fixed
EPSBFMK햲 ■
219.00
Draw out
EPSBDMK햲 ■
219.00
SB ICCB and
STD
3200A,
5000A
Fixed
EPSB4FMK 햲 ■
219.00
Drawout
EPSB4DMK햲 ■
219.00
Sensitrip
ALL
ALL
EP
209.00
Component Selection Guide 햳
Trip Units and Application
Component
Type
ZSI (only)
with
Sensitrip
MCCB’S
Access
and/or
ZSI with
Sensitrip
MCCB’s
EP
✓
✓
EPSB
MTZ 햴
✓
ZSI (only)
with all
SB-EC
Trip Units
ACCESS
ACCESS
and/or
with
SB-TL
Trip
Units
✓
✓
✓
✓
MTA 햴
EPC Cable
✓
✓
MTC Cable 햵
✓
✓
햲
Factory wired when ACCESS communications or ZSI
is ordered for the SB breaker from the factory.
햳 When ordered with circuit breaker from the factory.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햴
햵
✓
✓
✓
MTCSB Cable
ACCESS
with
SB-EC
Trip
Units
✓
One MTA or MTZ per eight trip units when required.
Always required when multiple MT’s are used.
One additional cable per each additional MT.
Discount Schedule MCCB
Lug information
Mechanical Lug
For Use
With Type(s)
Circuit Breaker
Ampere Rating
Selection
Cables Per
Lug
Lug Wire Range
Catalog
Number
List
Price $
15–40
1
1
#14–#6 AWG Cu
#12–#6 AWG Al
TC1Q1
2.60
45–100
1
1
#8–#1 AWG Cu
#6–#1/0 AWG Al
TA1Q1
2.60
15–20
1
1
#14–#10 AWG Cu
#12–#10 AWG Al
25–35
1
1
#14–#6 AWG Cu
#12–#6 AWG Al
Switching
Neutrals
40–50
1
1
#8–#6 AWG Cu
#8–#4 AWG Al
BG,
BLG
55–70
1
1
#8–#4 AWG Cu
#8–#2 AWG Al
80–100
1
1
#4–#1/0 AWG Cu
#2–#1/0 AWG Al
110–125
1
1
#2–#1/0 AWG Cu
#1/0–#2/0 AWG Al
Line Side
BQ, BQH,
BQHF
BQE,
BQF,
BL, BLH,
HBL,
HBQ
Load Side
Lugs are integral to
Circuit Breaker
Line Side (CQD, CQD6) & Load Side
BQD, CQD
BQD6, CQD6
NGG
#14–#6 AWG Cu
#12–#6 AWG Al
Integral
45–100
1
#8–#1 AWG Cu
#6–#1/0 AWG Al
Integral
15–30
1
#14–#6 AWG Cu
#12–#6 AWG Al
TC1Q1
2.60
15–30
1
#14–#6 AWG Cu
3TC1Q1
7.20 (pkg. of 3)
35–125
1
#8–#1/0 AWG Cu
#8–#2/0 AWG Al
3TC1GG20
13.40 (pkg. of 3)
15–125
—
NUT KEEPER PLATE
TNKG3
17.90 (pkg. of 3)
1
#14-3/0 AWG Cu
3TW1EG30
12.80 (pkg. of 3)
1
#14-1/0 AWG Cu/Al
3TA1EG10
12.80 (pkg. of 3)
15-125
1
#6-3/0 AWG Cu/AI
3TA1EG30
12.80 (pkg. of 3)
15-125
—
Nut Keeper Kit (3-pole)
TNKE3
12.30 (pkg. of 3)
15-125
—
Nut Keeper Kit (4-pole)
TNKE4
15.60 (pkg. of 4)
Note:
(A) Molded case circuit breakers having a rated ampacity
of 125 amperes or less are to be connected with 60 or
75° C wire. Circuit breakers having a rated ampacity
greater than 125 amperes shall only be cabled with
75° C cable unless otherwise indicated on the circuit
breaker label. Exceptions to this rule are outlined in
article 110-14 C(1)(2) of the 2005 National
Electrical Code.
(B) Connector wire ranges and cavities are established in
conjunction with Table 6.1.4.2.1 of UL 489 standards.
Discount Schedule MCCB
Lug
is steel.
in package of six.
nut keeper plate is required with each lug on the
NGG breaker.
Sold
One
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-81
MOLDED CASE
CIRCUIT BREAKERS
15-125
15-125
6
NEG, HEG
1
15–40
Lug Information
Aluminum Body Lugs for Copper or Aluminum Wire
For Use
With Type(s)
Circuit Breaker
Ampere Rating
Cables Per
Lug
QJ2, QJH2
QJ2H, HQJ2H
60–225
1
15–25
1
30–100
110–125
Catalog
Number
List
Price $
#6 AWG–300 kcmil (Cu)
#4 AWG–300 kcmil (Al)
TA1Q300
13.40 (pkg. of 3)
#14–#10 AWG (Cu)
#12–#10 AWG (Al)
SA1E025
1
#10–#1/0 (Cu or Al)
LN1E100
1
#3-3/0 (Cu)
#1-2/0 (Al)
TA1E6125
30–60
1
#10–4 (Cu or Al)
LD1E060
(Load Side)
12.70
70–100
1
#4–#1/0 (Cu or Al)
LD1E100
(Load Side)
3.90
FXD6-A, FD6-A,
HFD6,
CFD6
HHFD6
70–250
1
#6 AWG–350 kcmil (Cu)
#4 AWG–350 kcmil (Al)
TA1FD350A
22.00
SJD6(A),
SHJD6(A)
SCJD6
65-200
1–2
#4 AWG–3/0 (Cu or Al)
TA2J630
32.50
JXD2(A), JXD6(A),
JD6(A), SJD6(A),
HJD6(A), HJXD6(A)
HHJXD6, HHJD6,
SHJD6(A), CJD6,
SCJD6
200–400
1–2
3/0–500 kcmil (Cu)
4/0–500 kcmil (Al)
TA2J6500
31.50
LXD6(A), LD6(A),
SLD6(A), HLD6(A),
HLXD6(A), HHLXD6,
HHLD6, SHLD6(A),
CLD6, SCLD6
250–600
1–2
3/0–500 kcmil (Cu)
4/0–500 kcmil (Al)
TA2J6500
31.50
500–600
1–2
#1–500 kcmil (Cu or Al)
TA2K500
71.00
1–3
1/0–500 kcmil (Cu or Al)
TA3K500
All 2, 3-pole
ED2, ED4, ED6,
ED6 ETI,
HED4,
HHED6
6
CED6
All 1-pole
ED, HED
MOLDED CASE
CIRCUIT BREAKERS
Selection
LMD6햲, LMXD6햲,
HLMD6햲,
HLMXD6햲, MD6,
MXD6, SMD6,
HMD6, HMXD6,
SHMD6, CMD6,
SCMD6
500–800
ND6,
NXD6, SND6,
HND6, HNXD6,
SHND6, CND6,
SCND6
800–1200
PD6, HPD6,
CPD6
PXD6,
HPXD6,
SPD6,
SHPD6
1200–1600
PD6, PXD6,
HPD6, HPXD6,
SPD6, SHPD6,
RD6, RXD6,
HRD6, HRXD6, STD
1200–2000
햲 Use
TA2K500 or TA3K500 only.
for 100% rated MD/ND frame breakers.
햳 Used
6-82
1–2
Lug Wire Range
3.90
3.90
12.70
98.00
햳
101.00
500–750 kcmil (Cu or Al)
TA2N750
250–500 kcmil (Cu or Al)
2TA4P8500 햳햴
3TA4P8500 햵
584.00
843.00
250–500 kcmil (Cu or Al)
2TA4N8500 햴
3TA4N8500 햵
588.00
853.00
1–5
300–600 kcmil (Cu or Al)
TA5P600
320.00
1–6
300–600 kcmil (Cu or Al)
TA6R600
338.00
1–4
햴 Contains
햵 Contains
2 connectors plus 1 NDTS end barrier.
3 connectors plus 1 NDTS end barrier.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Lug information
Optional Mechanical Lugs
For Use
With Type
QJ2, QJH2,
QJ2H, HQJ2H
ED, HED 1, 2 & 3-pole
HFD6, HHFD6,
CFD6, F(X)D6-A
J(X)D2(A), J(X)D6(A),
HJD6(A), HHJD6,
SHJD6(A), L(X)D6(A),
HHLD6, SCD6,
HLD6(A), SHLD6(A),
CJD6, CLD6, SCJD6,
SCLD6
SMD6, M(X)D6,
HM(X)D6, HMD6,
CMD6, SCMD6, SND6,
N(X)D6, HN(X)D6,
SHND6, CND6, SCND6
R(X)D6, HR(X)D6
P(X)D6, HP(X)D6,
CPD6, SPD6, SHPD6
Selection
Circuit Breaker
Ampere Rating
Cables Per
Lug
Lug
Material
Lug Wire Range
Qty Per
Catalog No
60–225
1
Cu
#6 AWG–250 kcmil (Cu)
3
1, 2 & 3-pole 30-125
1
Cu
#10–#1/0 (Cu)
70–250
1
Cu
#6 AWG–350 kcmil (Cu)
1
TC1FD350
34.50
200–600
1
1–2
Cu
3/0–600 kcmil (Cu)
3/0–500 kcmil (Cu)
1
1
TC1J6600 햲
TC2J6500 햲
77.00
76.00
250–600
1
1
Al
500–750 kcmil (Al)
500–600 kcmil (Cu)
1
TA1L6750
76.00
1–2
1–3
Cu
Cu
1–2
Al
1–3
Al
1
1
2
3
2
3
1
TC2K500
TC3K350
2TA2N8750
3TA2N8750
2TA3N8750
3TA3N8750
TC5R600
120.00
151.00
365.00
513.00
579.00
832.00
426.00
1
TA4P750▲
254.00
500–600
1600–2000
1–5
Cu
1200–1600
1–4
Al
600–750 kcmil (Cu/Al)
800–1200
TC1Q250
TC1ED6150
#1 AWG–500 kcmil (Cu)
#1 AWG–350 kcmil (Cu)
500–750 kcmil (Cu)
500–750 kcmil (Al)
500–750 kcmil (Cu)
500–750 kcmil (Al)
300–600 kcmil (Cu)
700–800
Catalog
Number
List
Price $
32.00
(pkg. of 3)
33.50
Compression Lugs
500–800
N(X)D6, HN(X)D6, CND6, SND6, SHND6, SCND6
900–1200
Lugs
Per Kit
Lug Wire
Size
Catalog
Number
List
Price $
1, 2, 3
2, 3
2, 3
1
1
1
#2/0 AWG Cu/Al
350 kcmil Cu/Al
350 kcmil
CCE125
CCQ225
CCF250
27.00
51.00
51.00
2, 3
1
500 kcmil
CCL600
150.00
2
6
CCM800K2
726.00
3
2
9
8
500 kcmil
CCM800K3
CCN1200K2
1056.00
951.00
3
12
CCN1200K3
1393.00
Distribution Lugs*
For Circuit Breaker Types
Ampere
Rating
Poles
Lugs
Per kit
Wires
Per Lug
Lug Wire Size
Catalog
Number
List
Price $
NEG, HEG
15-125
1,2,3
3
3
#14-#2 AWG Cu
3TA3EG02
101.00
(for 3)
NEG, HEG
15-125
1,2,3
3
6
#14-#6 AWG Cu
3TA6EG06
101.00
(for 3)
ED2, ED4, ED6, HED4, HHED6, CED6
15-125
1,2,3
1
6
#14-#4 AWG Cu
#6-#4 AWG Al
TA6ED06
33.50
70-250
2,3
1
6
#14-#4 AWG Cu
#6-#4 AWG Al
TA6FD04
41.50
6
#14-2/0 AWG Cu
TA6JD20
#6-2/0 AWG Al
89.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-83
F(X)D6-A, HF(X)D6, HHF(X)D6, CFD6
JXD2-A, J(X)D6-A, HJ(X)D6-A, HHJ(X)D6-A, CJD6-A,
SJD6, SHJD6-A, SCJD6, L(X)D6-A, HL(X)D6-A, CLD6-A,
SLD6-A, SHLD6-A, SCLD6
* Special purpose wire connectors, not for general use.
햲 Used
200-600
2,3
1
for 100% rated JD/LD frame circuit breakers.
▲ Built to order. Allow 6–8 weeks for delivery.
Discount Schedule MCCB
MOLDED CASE
CIRCUIT BREAKERS
M(X)D6, HM(X)D6, CMD6, SMD6, SHMD6, SCMD6
Poles
6
Ampere
For Circuit Breaker Types
Rating
Lugs (contains indicated number of lugs and necessary hardware per kit)
ED2, ED4, ED6, HED4, HHED6, CED6
15–125
QJ2, QJH2, QJ2-H
125–225
F(X)D6-A, HF(X)D6, HHF(X)D6, CFD6
125–250
JXD2-A, J(X)D6-A, HJ(X)D6-A, HHJ(X)D6-A, CJD6, SJD6-A, SHJD6-A,
200–600
SCJD6, L(X)D6-A, HL(X)D6-A, CLD6, SLD6-A, SHLD6-A, SCLD6
Kits (contain lugs and hardware for complete line or load end of 2 or 3-pole breaker)
Molded Case Circuit Breakers
MOLDED CASE
CIRCUIT BREAKERS
6
Modifications
A variety of internal and external
accessories, as well as modifications,
are available to adapt Siemens circuit
breakers to special installation
requirements. UL listed internal
accessories for 100 through 2000A
circuit breakers are field-addable.
Internal accessories fine tune an
electrical distribution system,
allowing control of the circuit breakers to
meet special application requirements.
For example, emergency situations may
dictate tripping critically placed circuit
breakers quickly. Shunt trips accomplish
this conveniently and efficiently.
Or, when voltage drops are a concern,
undervoltage trips automatically open
the circuit breaker at a predetermined
voltage level.
A wide range of external operating and
mounting accessories is also available.
For example, face, shallow, and back
mounting plates are ideal for tailoring BQ
circuit breakers to OEM applications.
A complete line of operating handles
and handle-blocking devices meet
switchboard, enclosure and safety
needs. Plug-in mounting assemblies,
which simplify switchboard mounting of
circuit breakers and permit breaker
removal without disconnecting bus or
cable connections, are available.
General/Selection
50°C Ambient Calibration — Not UL listed and not available for solid state, 100% rated breakers
or 400HZ calibrated breakers.
For BL Type Circuit Breakers
— Add suffix ‘M’ to catalog number
(Example: B120M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Charge
For BQ, QJ2, and ED Frame Circuit Breakers
— Replace ‘B’ in catalog number with ‘M’ . . . . . . . . . . . . . . . . . . . . . . . .No Charge
(Example: BQ3M060, QJ23M200, ED63M060)
For EG Frame Circuit Breakers
— Replace ‘B’ in catalog number with ‘C’
(Example: NEG3C015) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Add 10% to list price
For FD, JD, LD, LMD, MD, ND, PD, and RD Frame Circuit Breakers
Non-Interchangeable Trip (3–pole only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Charge
— Replace ‘B’ in catalog number with ‘M’
(Example: FXD63M225, JXD63M400)
Interchangeable Trip (trip unit only, 3–pole only) . . . . . . . . . . . . . . . . . . . .No Charge
— Replace ‘T’ in catalog number with ‘W’
(Example: FD63W200, JD63W400)
400 HZ Calibration
UL Listed (5KA IR)
For BQ & BL Type Circuit Breakers (200A max.) . . . . . . . . . . . . . . . . . . . . .Add 25% to list price
— Add suffix ‘Y’ to catalog number
Not UL Listed
For all other Circuit Breakers, see derating tables on page 6-152 and order standard circuit breakers.
Fungus Proofing — In accordance with MIL-T-152.
All BQD, CQD, NGG, ED, FD, JD, LD, LMD, MD, ND, PD, and RD, Frame Circuit Breakers are
inherently fungus resistant and do not require special treatment.
Fungus proofing in accordance with MIL-T-152
For BL, and BQ Type Circuit Breakers
— Order must be placed directly with the factory by the sales office . .Add $10.00 net per pole
For all other Circuit Breaker Types
— Order must be placed directly with the factory by the sales office . .Add $160.00 net per device
Certificate of Compliance with Test Report (catalog number CERT OF COMP.) Add $210.00 net
Certificate of compliance testing must be performed on the actual device being shipped.
The certificate cannot be provided after initial shipment. Order for devices with COC requirement
must be placed directly with the factory by the sales office and shipped directly to the end user.
UL 489 Supplement SB Naval Use Breakers
Ordering Information
Breakers tested to UL 489 Supplement SB are qualified for use
on non combat and auxiliary naval vessels.
For “NAVAL” label, add $75. net per catalog number per order.
Order must be placed directly with the factory by Siemens
Sales Office.
Siemens’ molded case breakers from the ED frame through the
2000 Amp SB frame can be labeled “Naval” in compliance with
Supplement SB.
Supplement SB testing comprises two sets of vibration tests.
The first is to find mechanical resonances in the product and to
subject the breaker to extreme testing at each resonant frequency. The second is a swept frequency test, in which the frequency of excitation is changed in intervals of 1Hz, and held at
each frequency for five minutes. The excitation frequencies run
from 4 to 33Hz, and the test is conducted in each of the three
orthogonal axes of the breaker.
During these tests, the breaker must not trip from the closed
position, nor may the contacts touch from the open position.
Calibration and insulation resistance are also verified during the test.
For detailed information, refer to UL 489, Supplement SB.
6-84
Types
BQD/CQD
NGG
ED2, ED4, ED6, IIED4, HED6
CED6
FD6, FXD6, HFD6, HFXD6
CFD6
JXD2, JD6, JXD6, LXD6, LD6,
HJD6, HJXD6, HLD6, HLXD6
HHJD6, HHJXD6, HHLD6, HHLXD6
CJD6, CLD6
MD6, MXD6, HMD6, HMXD6, CMD6,
ND6, NXD6, HND6, HNXD6, CND6
PD6, PXD6, HPD6, HPXD6, CPD6,
RD6, RXD6, HRD6, HRXD6
SBA400, SBS400, SBA800,
SBS800, SBA1200, SBS1200,
SBA1600, SBS1600, SBA2000, SBS2000
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
UL File
E10848, Vol 10, Sec 1
E10848, Vol 10, Sec 2
E10848, Vol 4, Sec 11
E10848, Vol 4, Sec 13
E10848, Vol 4, Sec 17
E10848, Vol 4, Sec 18
E10848, Vol 4, Sec 8
E10848, Vol 4, Sec 20
E10848, Vol 4, Sec 14
E10848, Vol 4, Sec 15
E10848, Vol 4, Sec 19
E9896, Vol 15, Sec 1
Molded Case Circuit Breakers
Internal Accessories
General
Feature Combinations
The available feature combinations are shown in the chart below. For applications requiring combinations
of features not listed in this chart, consult the sales office for availability.
Breakers
Modules Avail. On
ST/
Per
Breaker
ST/ ST/
AUX/
UVT/
Breaker Poles
ST AUX ALSW ALSW UVT AUX
UVT/
UVT/ ST/
ALSW ALSW
AUX
AUX/
ALSW
Elect.
Bell
Ground Grd fault
ALSW Alarm fault
w/Bell
QP, BQ, BL햲
1
1, 2, 3
1 —
—
—
—
—
1,2
—
—
—
—
BQD, CQD, NGG
1
2, 3
1 1/1
—
—
—
—
1,2
1/1
1
—
—
—
QJ햲
1
3
1 1/1
—
—
—
—
2
—
—
—
—
—
1
—
All ED
1
1, 2, 3
1 1/1,1/2 1/1
1/1/1
1
1/1, 1/2 1/1
1/1/1
1, 2
1/1, 2/1
1
—
1
All FD
2
2, 3
1 —
—
—
1
1/1
—
—
1, 2
1/1
1
—
—
—
All JD, LD, LMD햳
2
2, 3
1 1
—
—
1
1/1, 1/2 —
—
1, 2
1/1, 1/2
1, 2
—
—
—
1
3
1 1
—
—
1
1/1, 1/2 —
—
1, 2
1/1, 1/2
1, 2
—
—
—
2
2, 3
1 1/1
—
—
1
1/1, 1/2 —
—
1, 2
1/1, 2/1
1, 2
—
—
—
1
1
—
—
SJD6, SHJD6, SCJD6,
SLD6, SHLD6, SCLD6햴
All MD, ND, PD, RD
Including Electronic
trip햵
1 NC / 1 NO,
2 NC / 2 NO,
STD햶
6
3
1 —
—
—
1
—
—
—
3 NC / 3 NO, —
4 NC / 4 NO,
5 NC / 5 NO,
6 NC / 6 NO
Shunt Trip (ST)
When voltage drops to a value below 35%
of the nominal coil rating, the undervoltage
trip device automatically opens the breaker.
The operation is instantaneous, and the
circuit breaker cannot be reclosed until the
For applications requiring remote “on” or
“off” indication (or electrical interlocking),
auxiliary switches are available. Each
switch comprises an “A” (open when
circuit breaker is open) and a “B” (closed
when circuit breaker is open) contact with
a common connection. (Form C)
For ED Frames
햲 Factory
assembled only
mechanical interlock is installed, no accessory module
can be installed in the right pocket.
햳 If
For FD Frames
햴 If
mechanical interlock is installed, no accessory module
can be installed.
햵 If mechanical interlock is installed, no accessory module
can be installed in the left pocket.
The alarm switch contact is closed when
the circuit breaker is opened automatically
by an overload, short circuit, shunt trip or
undervoltage trip. The alarm switch
contact is open when the circuit
breaker is reset.
For JD and LD Frames
햶 One
module per column.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-85
MOLDED CASE
CIRCUIT BREAKERS
Undervoltage Trip (UVT)
Auxiliary Switch (AUX)
Alarm Switch (ALSW)
6
One or all critical circuit breakers may
be tripped from a distant control point
by use of a shunt trip device. A shunt
trip operates through an auxiliary switch
contact; when the breaker opens, current
is not maintained on the shunt trip coil.
voltage returns to 85% of line voltage. The
undervoltage trip, which is continuously
energized, must be energized before the
circuit breaker can be closed.
Molded Case Circuit Breakers
External Accessories
Selection
Handle Ties
Provide simultaneous switching of 2 adjacent handles. Do not provide common trip.
For Use With
Breaker Frame(s)
Catalog
Number
List
Price $ each
Standard
Package
Wt Lb/
Std Pkg
BQ, BQH, HBQ, BLH, HBL
ECQTH3
200.00햲
50
1
BQXD, BL, BQ, BQH,
HBQ, BLH, HBL
ECQLD3
98.00햲
10
1
One pole BL, BLF, BE, BAF
ECPLD1
10.10
10
1
Two pole BL, BLF and BE
ECPLD2
10.20
10
1
All QJ
HL9419
15.10
10
1
All BQD, CQD
BQDPLD
18.40
01
1
NGG
HPLG
17.90
01
1
EB, 1- thru 3-pole
HPLEB
11.20
01
1
EG, 3- and 4-pole only
HPLE
15.60
01
1
All ED
ED2HPL
16.00
01
1
All FD
FD6PL1
15.00
01
1
All JD, LD, LMD
JD6HPL
24.00
01
1
All MD, ND, PD, RD
MN6PLD
62.00
01
1
STD
STDPLD ■
131.00
01
1
2.80
01
1
⁄4
Padlocking Devices
For locking breaker in “OFF” position.
QTH3
⁄4
⁄4
⁄4
⁄4
⁄8
⁄4
⁄8
⁄4
⁄4
⁄4
⁄4
⁄4
FD Padlocking
Device
FD6PLI
Padlocking
Device
QLD3
Filler Plates
BQ, BQH, HBQ
QF3
⁄4
Handle Blocking Devices
6
BL, BLH, HBL, BQXD,
BQ, BQH, HBQ
ECQL1
MOLDED CASE
CIRCUIT BREAKERS
For holding breaker in “ON” or “OFF” position. Not a lockout/tagout device.
QJ2, QJH2, QJ2H, HQJ2H
All BQD, CQD, NGG
97.00햲
10
QJHS1
13.40햲
25
1
BQDHBD
10.60
01
1
EG
HBDE
15.60
01
1
All ED
E2HBL
16.00
01
1
All FD
FD6HB1
18.40
01
1
All JD, LD, LMD
JD6HBL
22.00
01
1
All MD, ND, PD, RD
MN6BL
62.00
01
1
01
2
1
⁄4
Filler Plate
QF3
⁄4
⁄4
⁄4
⁄2
⁄2
⁄2
Handle Extensions
For replacement. One extension shipped with breaker.
All MD, ND, PD, RD
EX11
109.00
STD
EXSTD■
137.00
FD Handle
Blocking Device
FD6HB1
Terminal Shields
Breaker Type
Poles
Catalog
Number
List
Price $ each
NGG
3
TSSG3A
28.00
Handle
Blocking Device
QL1
Standard
Package
1
Handle
Extension
EX11
■ Built to order. Allow 2–3 weeks for delivery.
Note: CSO = Consult Sales Office
only in standard package quantities.
햲 Sold
6-86
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
External Accessories
Selection
Mounting Clips
For Use With
Breaker Frame(s)
Number of
Poles
Catalog
Number
BQ, BQH
1
MB120
List Price
$ each
8.50
Standard
Package
Wt Lb
Std Pkg
20
1
⁄4
MB120
Face Mounting Plates
GFCI
1
FP9558
14.50
10
1
⁄2
FP9508
FP9555
FP9556
13.40
17.00
18.40
10
10
10
1
BQ, BQH, BQXD
1
2
3
1
2
3
CQDFMB1
CQDFMB2■
CQDFMB3■
28.00
31.50
35.00
1
1
1
1
CQD, CQD6
FMPG1
FMPG2
FMPG3
27.00
29.50
33.50
1
1
1
1
NGG
1
2
3
SMB6
5.30
30
11⁄2
⁄2
1
11⁄2
⁄4
⁄4
1
⁄4
1
Face Mounting Plates
FP9558 FP9508 FP9555 FP9556
⁄4
1
⁄4
1
⁄4
Shallow Mounting Brackets
BQ, BQH
1–6
Back Mounting Plates
All QP 1 and 2-pole
1, 2
I0204ML1125
31.50
10
1
All QP 3-pole
3
I0303ML3100
59.00
10
1
2
3
4
BR2
BR3
BR4
17.00
17.00
17.00
10
10
10
1
1
E2BMB
14.20
1
1
CQD, CQD6
CQDSMK
17.70
1
11⁄4
NGG
MSKG4
3.90
1
1
All QJ
MSQJ
4.40
1
1
BQ, BQH, BQXD
ED2, ED4, ED6, HED4, HED6
⁄4
⁄4
SMB6 (6 shown)
⁄4
⁄4
1
⁄4
QML12
1
⁄4
Mounting Screw Kits
All ED (CED6 requires 2 kits)
MSE6
MSE6100
4.40
1.10
1
100
1
MSF6
MSF650
4.40
1.10
1
50
1
All FD (CFD6 requires 2 kits)
All EG 1-pole
MSKE1
3.90
—
—
All EG 2-pole
MSKE2
5.00
—
—
All EG 3 or 4-pole
MSKE4
6.20
—
—
All JD, LD
MSJ6
14.20
1
1
All LMD
MSLMD
24.00
1
1
All MD, ND,
MSMN
24.00
1
1
All PD, RD
MSPR6
57.00
1
2
Back Mounting
Plate BR2
MOLDED CASE
CIRCUIT BREAKERS
⁄4
1
⁄4
1
⁄4
⁄4
⁄4
Mounting Screw Kit
MSE6
“MI” Mechanical Interlocks
For Use With
Breaker Type(s)
Panel
Mounted
BQ
—
ECQML12
299.00
10
All EG (Sliding Bar)
HSBE
—
553.00
1
—
All EG (Walking Beam)
WBMEFM
—
604.00
1
—
All QJ
CSO
—
—
All FD
MI5444
MI5444
604.00
1
—
All JD, LD
MI5413
—
604.00
1
1
All LMD
MI5406 ■
—
604.00
1
1
All MD
MI5404 ■
—
604.00
1
3
Plug-in
Mounted
List Price
$ each
Standard
Package
Complete with
0
two breakers
Wt Lb
Std Pkg
1
⁄4
1
All ND
MI5404 ■
—
604.00
1
3
All PD, RD
MI5405▲
—
694.00
—
—
STD
STDMIF32▲
—
4036.00
—
—
Mechanical Interlock
MI5444
■ Built to order. Allow 2–3 weeks for delivery.
With
Each
▲ Built to order. Allow 6–8 weeks for delivery.
Addition
Mechanical
Note: CSO = Consult Sales Office
Kit consists of 4 screws and washers.
Consists of 1 screw and washers (order 100).
Consists of 1 screw and washers (order 50).
Discount Schedule MCCB
I0204ML1125
6
⁄4
mechanical interlock in place, no accessory can be
installed into circuit breaker right pole.
of the mechanical interlock will prevent
accessory installation in the left pole.
Sold only in standard package quantities. Multiply List
Price Each times package quantity for full price.
package contains 5 strips of 6 each. Each strip can
be broken at perforations for 1, 2 or 3-pole use.
interlock is not designed for use within
Siemens panelboards.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-87
Molded Case Circuit Breakers
External Accessories
Selection
Rotary Door Mounted Operating Handles
Types 1, 3, 3R , 12, 4 4X
Complete Mechanism
For Use
Catalog Number
With
Breaker Standard
Variable
Frames Depth
Depth
Handle Only
Breaker Operator Shaft Only
List
Catalog List
Catalog
Price $ Number Price $ Number
EG
RHVE64X
RHVE124X
225.00 —
ED
CRHOESD
CRHOEVD
159.00
FD
CRHOFSD
CRHOFVD
—
List
Length Catalog
Price $ (inches) Number
—
—
RHOEBO
76.00
—
2
RHOFBO 131.00
213.00
12
CRHOH 51.00
JD, LD CRHOJSD CRHOJVD 295.00
RHOJBO 212.00
16
LMD
CRHOLMSD CRHOLMVD 295.00
RHOLMBO 212.00
MD, ND RHONSD
PD, RD
RHONVD
452.00 RHOH
List
Price $
—
—
RHOSSD
31.50
RHOSVD
31.50
RHOSXD
31.50
RHONSSD▲ 97.00
RHONSVD
97.00
RHONSXD 127.00
3
116.00 RHONBO 239.00 12
24
CRHOH
RHOH
Rotary Door Mounted Operating Handles
Types 1 & 12
Standard Depth
Variable Depth
Handle and Shaft
Breaker Operator
For Use With
Catalog
Breaker Frames Number
List
Catalog
Price $ Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
CQD, NGG
—
ED
D11CEU1
—
RHOCQVD 145.00
RHOH62
55.00
CQDOP
90.00
160.00
D11CEU2
—
—
—
—
FD
D11CFU1▲ 198.00
D11CFU2
239.00
—
—
—
—
JD, LD
—
D11CJU2
339.00
—
—
—
—
—
183.00
List
Price $
D11CEU2
For CQD and NGG red emergency handle, order assembly RHOCQVDE (includes handle and operator).
For CQD and NGG in a NEMA 3R enclosure, order CQDOP34 operator ($90.00), RHOH handle and RHOSVD shaft.
For CQD and NGG in a NEMA 4 or 4X enclosure, order CQDOP34 operator, RHOH4 handle and RHOSVD shaft.
Through Door Mounted Operating Handles
Rotary Door Mounted
Operating Handles
Types 1 & 12
MOLDED CASE
CIRCUIT BREAKERS
6
Standard Depth
Variable Depth
For Use With
Breaker Frames
Catalog
Number
List
Price $
Catalog
Number
CQD, NGG
FMHOS
—
—
QJ
OH9498 ■
139.00
VH9499
218.00
EG
RHFESD
155.00
—
—
EG (red handle)
RHFESDEM
155.00
—
—
ED
E2RH1
155.00
E2RHV9
221.00
FD
F6RH1
155.00
F6RHV9
221.00
90.00
List
Price $
Standard
Depth
F6RH1
Door Latch Kits
Catalog Number
Right Hand
Type
List
Price $
Catalog Number
Left Hand
List
Price $
2 point latch
DKR2
338.00
DKL2■
338.00
3 point latch
DKR3
377.00
DKL3■
377.00
Variable Depth
Rotary Handle
RHOCQVD
■ Built to order. Allow 2–3 weeks for delivery.
▲ Built to order. Allow 6–8 weeks for delivery.
For use on 3-pole ED frame only.
6-88
F6RHV9
Meets the requirements of NFPA 79, section 5.3.3.1
for locking external operator disconnecting devices.
3 or 3R, order shaft and breaker operator as shown,
and handle RHOH. For 4 & 4X, order handle RHOH4.
List Price $150.00. Consult sales office for additional EG
operator shaft lengths.
For
extended shaft support order catalog number
RHONSB2.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
External Accessories
Selection
Max-Flex™, Flange Mounted Variable Depth Operators 햴
Complete Kit
Handle Only
List
Price
$
List
Price
$
Frames
NEMA
Type
EG
1, 3 (R),
MFKE3햵
12
528.00 —
—
4 (x)
606.00 —
—
1, 3 (R),
FHOE036 햲
12
630.00 FHOH
315.00
4 (x)
—
432.00
ED
FD
JD, LD,
SJD, SLD
LMD
Catalog
Number
Breaker Operator
MFKE4X3
—
Catalog
Number
FHOH4
1, 3 (R),
FHOF036
12
699.00 FHOH
315.00
4 (x)
—
432.00
—
FHOH4
1, 3 (R),
FHOJ036
12
742.00 FHOH
315.00
4 (x)
—
432.00
—
FHOH4
1, 3 (R),
FHOLM036 741.00 FHOH
12
315.00
4 (x)
FHOH4
432.00
958.00 FHOHN
470.00
—
—
1, 3 (R),
MD, ND,
FHON048
12
PD, RD,
SMD, SND,
4 (x)
—
SPD
Catalog
Number
List
Price
$
Catalog
Number
List
Price
$
—
—
—
—
FHOHN4
Handle
Breaker Operator
FHOEBO햲 161.00 FHOEC036 153.00
Max Flex ™
FHOFBO
222.00 FHOFC036 161.00
FHOJBO
249.00 FHOJC036 177.00
FHOLMBO 249.00 FHOJC036 177.00
FHONBO
—
Cable
36" Cable
햳
251.00 FHONC048 237.00
630.00
Max-Flex™ handles are available with solid black handles instead of the customary “red for on” flange handle. These are
preferred for use in IECmarkets, where red handles have specific meaning. Order components separately, appending the
letter “i” to the catalog number (e.g. FHOHI).
Alternate Length Cable Only
ED
FD
JD/LD/LMD
MD/ND/PD/RD
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Price $
048
060
072
084
096
120
144
182.00
203.00
224.00
249.00
275.00
376.00
417.00
192.00
217.00
239.00
264.00
287.00
376.00
417.00
209.00
239.00
275.00
277.00
376.00
408.00
424.00
237.00
275.00
320.00
337.00
401.00
437.00
588.00
FHOEC048
FHOEC060
FHOEC072
FHOEC084▲
FHOEC096
FHOEC120▲
FHOEC144▲
FHOFC048
FHOFC060
FHOFC072
FHOFC084▲
FHOFC096
FHOFC120
FHOFC144▲
FHOJC048
FHOJC060
FHOJC072
FHOJC084▲
FHOJC096
FHOJC120▲
FHOJC144▲
FHONC048
FHONC060
FHONC072
FHONC084▲
FHONC096
FHONC120▲
FHONC144▲
MOLDED CASE
CIRCUIT BREAKERS
List
Catalog
Price $ Number
6
Catalog
Inches Number
Handle Auxiliary Switch
For use with Max-Flex and Rotary Door operators (FHOH and RHOH). 1 NO and 1 NC contact (Form C).
For Use With
Catalog Number
List Price $
ED, FD, JD, LD, LMD, ND, PD, RD, SD, Max Flex
HAS1
187.00
Fixed Depth Flange Mounting
Frames
Minimum
Enclosure
Depth
ED
6.44
FD
6.44
Left Hand Mount
NEMA
Type
Right Hand Mount
Catalog Number
List
Price $
Catalog Number
List
Price $
1, 3R, 12
FDFBEL▲
275.00
FDFBER▲
275.00
4, 4X
FDFBEL4▲
368.00
FDFBER4▲
368.00
1, 3R, 12
FDFBFL▲
294.00
FDFBFR▲
294.00
4, 4X
FDFBFL4▲
391.00
FDFBFR4▲
391.00
Max-Flex™ handles are available with solid black handles instead of the customary “Red for On” flange handle. These are
preferred for use in IECmarkets, where red handles have specific meaning. Order components separately, appending the
letter “i” to the catalog number (e.g. FHOHI).
▲ Built to order. Allow 6–8 weeks for delivery.
햲 For
1- or 2-pole breaker order FHOED036 complete kit or
FHOEDBO breaker operator only. Use MFHM3R handle.
Discount Schedule MCCB
햳 48
inch cable is standard length for M through R frame
Max-Flex operators.
햴 Meets requirements of NFPA 79, section 5.3.3.1 for
locking external operator disconnecting devices
FDFBFR
햵 Consult
sales office for additional cable lengths for EG
Flex Shaft Operators.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-89
Molded Case Circuit Breakers
External Accessories
Selection/Dimensions
NEG, HEG Motor Operators
Breaker Frame
Voltage
Catalog Number
List Price $
EG
120/240AC, 125VDC
SEAER
1510.00
Consult Sales Office for availability.
Telemand® Motor Operator
Breaker Frame
ED except CED
AC
Voltage
Hinged to
Open Down
List
Price $
120
MOE6120
3375.00
240
MOE6240 ▲
3672.00
ED motor operator opens downward.
Breaker
Frame
DC
Voltage
Hinged to
Open Right
List
Price $
AC
Voltage
Hinged to
Open Right
List
Price $
FD
24
48
125
MOF6024DC▲
MOF6048DC▲
MOF6125DC▲
3549.00
3549.00
3686.00
120
240
MOF6120
MOF6240
3447.00
3875.00
JD, LD
24
48
125
MOJ6024DC▲
MOJ6048DC▲
MOJ6125DC▲
4507.00
4507.00
4643.00
120
240
MOJ6120
MOJ6240
4460.00
4460.00
LMD
24
48
125
MOLMD6024DC▲
MOLMD6048DC▲
MOLMD6125DC▲
4507.00
4507.00
4643.00
120
240
MOLMD6120
MOLMD6240
4460.00
4460.00
MD, ND,
PD, RD
—
—
—
—
—
—
120
240
MOMN6120
MOMN6240
5038.00
5038.00
Telemand Motor Operator
FD, JD, LD, LMD, MD, ND, PD, RD
Frames
To order FD through RD motor operators with Left side hinges, add “L” to catalog number (e.g. MOF6120L).
List prices are the same.▲
MOLDED CASE
CIRCUIT BREAKERS
6
Dimensions
Frame
B
C
D
E
ED
A
7.04
4.31
—
4.31
13.84
F
8.84
FD
9.50
4.55
1.60
6.84
9.70
7.58
JD, LD, LMD
11.00
7.50
0.79
8.34
9.85
7.74
MD, ND, PD, RD
16.00
9.00
—
9.83
13.13
10.13
Front View
Operating Currents
On
Catalog
Number
In-Rush
(Amps)
MOE6120
MOE6240
10.25
5.2
MOF6120/L
MOF6240/L
Off
Running
(Amps)
Time
(msec)
In-Rush
(Amps)
Running
(Amps)
Time
(msec)
Reset
(Amps)
2.3
1.1
550
500
10
5
2.3
1
400
330
2.3
1.1
13.6
7.6
5.5
3.5
200
200
13.6
7.6
5.5
3.5
175
185
5.5
3.5
MOLMD6120/L
13.6
6
210
13.6
6
185
6
MOJ6120/L
MOJ6240/L
13.6
7.6
6
3.5
210
217
13.6
7.6
6
3.5
185
185
6
3.5
MOMN6120/L
MOMN6240/L
30.2
14.7
13.2
6
240
260
30.2
14.7
13.2
6
210
230
13.2
6
E
Bottom View
For inches / millimeters conversion, see Application Data section.
▲ Built to order. Allow 6–8 weeks for delivery.
6-90
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
External Accessories
Selection
Plug-In Mounting Assemblies, Including Base and Tulip Assemblies
—
—
PCBERC4햷
402.00
—
—
2
PC2637▲
109.00
PC2638▲
109.00
3
PC2657
176.00
PC2658
176.00
2
PC2637▲
109.00
PC2638▲
109.00
3
PC2657
176.00
PC2658
176.00
2
PC4753▲
265.00
PC4753▲
265.00
3
PC4754
345.00
PC4754
345.00
2
PC4753▲
265.00
PC4753▲
265.00
3
PC4754
345.00
PC4754
345.00
All JD
except CJD
2
PC5777▲
356.00
PC5777▲
356.00
3
PC5778
589.00
PC5778
589.00
Kit CJD, SCJD
3
PCCJD
640.00
PCCJD
640.00
All LD
except CLD
2
PC5660▲
667.00
PC5660▲
667.00
3
PC5661
933.00
PC5661
933.00
984.00
PCCLD
984.00
Kit CLD, SCLD
All MD
All ND
3
PCCLD
2
PC5662▲
1227.00
PC5662▲ 1227.00
3
PC5663
1499.00
PC5663
1499.00
2
PC5664햴▲ 1696.00
PC5664햴▲ 1696.00
3
PC5666 햴
PC5666 햴
1955.00
1955.00
PL2616
PL2617
PL4762
PL4763
PL5796
PL5797
Tulip
Assemblies
Switchboard
Mounting
Plate
PL5680
PL5797
PL9698
PL9699
Tulip Assemblies Separately
RS4755
3-Pole
RS4756
List
Price $
ED
TCE2▲
137.00
TCE3▲
206.00
FD
TCF2▲
206.00
TCF3▲
308.00
JD
TCJ2▲
238.00
TCJ3▲
345.00
LD
TCL2▲
274.00
TCL3▲
410.00
MD
TCM2▲
308.00
TCM3▲
457.00
ND
TCN2▲
410.00
TCN3▲
479.00
➝
Catalog
Number
Circuit Breaker
With Rear-Connecting Studs
Rear-Connecting Studs
For Use
With
Breaker
Frames
Ampere
Rating
Description
Extension
Behind
Breaker
(inches)
Line Side
Load Side
Catalog
Number
List
Price $ 햵
Catalog
Number
List
Price $ 햵
All EG
125
125
Short
Long
3.60
6.00
RTLESR
RTLELR
43.00
51.00
RTLESR
RTLELR
43.00
51.00
All ED
100
100
100
100
Line Side (Short)
Load Side (Short)
Line Side (Long)
Load Side (Long)
2.38
2.38
4.88
4.88
RS2643햶▲
—
RS2641햶▲
—
45.00
—
54.00
—
—
RS2644햶▲
—
RS2642햶▲
—
45.00
—
54.00
All FD
250
250
Short
Long
3.12
7.06
RS4756햶▲
RS4755햶▲
65.00
102.00
RS4756햶▲
RS4755햶▲
65.00
102.00
All JD
400
400
Short
Long
5.85
11.20
RS5774▲
RS5773▲
180.00
180.00
RS5774▲
RS5773▲
180.00
180.00
All LD
600
600
Short
Long
5.85
11.20
RS5784▲
RS5783▲
214.00
203.00
RS5784▲
RS5783▲
214.00
203.00
CJD, SCJD
CLD, SCLD
Add required shield kit.
CLRSJL3
51.00
LM(X)D6,
HLM(X)D6
800
Short
Long
5.85
11.20
RS5788▲
RS5787▲
332.00
313.00
RS5788▲
RS5787▲
332.00
313.00
1200
1200
Short
Long
5.50
8.00
RS5786▲
RS5785▲
258.00
326.00
RS5786▲
RS5785▲
258.00
326.00
All MD,
ND
▲ Built to order. Allow 6–8 weeks for delivery.
햲 Furnished
at no extra charge when ordered with plug-in
mounting assembly.
햳 Each piece catalog number consists of (1) mounting
block assembly and required tulip assemblies (2) for
2-pole, (3) for 3-pole
Discount Schedule MCCB
햴 For
vertical bus mounting — for horizontal, substitute
PC5665 for PC5664 and PC5667 for PC5666.
includes one current stud, insulating tube, stud
nuts and terminal shields, when required.
햵 Price
햶 For
proper electrical clearance, studs must alternate
between short and long stud lengths on circuit breaker
poles (e.g. SLSLSL or LSLSLS).
햷 Plug-in assembly for EG breakers include line and load
side in one assembly.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-91
MOLDED CASE
CIRCUIT BREAKERS
List
Price $
6
Catalog
Number
➝
2-Pole
For
Frame
➝
CFD
—
➝
➝
352.00
4
➝
PCBERC3햷
➝
3
Base
Steel Switchboard
Mounting Plate 햲
Catalog Number
➝
All FD
except CFD
List
Price $
➝
CED
Catalog
Number햳
➝
All ED
except CED
Poles
List
Price $
➝
EG
Load Side
Catalog
Number햳
➝
Line Side
For Use With
Breaker Frames
Siemens VL Circuit Breakers
Technical Overview
Technical
Frame Summary and Ratings Table
Frame Family
DG
30 to 150A
40 to 250A
70 to 400A
Number of Poles
2,3
2,3
2,3
Type of Protection
Thermal-Magnetic
Electronic
Electronic with LCD
Motor Circuit Protector
Molded Case Switch
100% Rated Breaker
50°C Calibrated Breaker햳
Interchangeable Trip Unit
W In.(mm)
H
D
D2
6
JG
Continuous Ampere Range
Maximum Voltage Rating
MOLDED CASE
CIRCUIT BREAKERS
FG
4
4
600V
600V
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
—
—
◆
◆
◆
◆
4.1 (105) 2, 3-pole / 5.5 (139) 4-pole
7.3 (175)
3.4 (81)
4.2 (107)
Type N – Normal Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
65
65
UL
480Vac
35
35
600Vac
18
18
240Vac
65/65
65/65
IEC
415Vac
40/40
40/40
(lCU /lCS)
—
—
—
690Vac
12/6
12/6
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
30
18
—
—
30
18
—
—
Type H – High Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
100
100
UL
480Vac
65
65
600Vac
20
20
240Vac
100/75
100/75
IEC
415Vac
70/70
70/70
(lCU /lCS)
—
—
—
690Vac
12/6
12/6
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
30
18
—
—
30
18
—
—
Type L – Very High Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
200
200
UL
480Vac
100
100
600Vac
25
25
240Vac
200/150
200/150
IEC
415Vac
100/75
100/75
(lCU /lCS)
—
—
—
690Vac
12/6
12/6
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
햲
30
18
—
—
UL does not recognize AIC ratings for Molded Case
Switches or Motor Circuit Protectors.
햳 Not UL.
6-92
4
600V
30
30
—
—
햴
5.5 (139) 7.2 (183)
11 (279)
4.2 (102)
5.4 (138)
65
35
25
65/65
45/45
—
12/6
30
25
—
—
100
65
25
100/75
70/70
—
15/8
30
35
—
—
200
100
25
200/150
100/75
—
15/8
30
35
—
—
500Vdc nominal, 600Vdc max. for ungrounded DC UPS
systems.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햵
DC Interruption Ratings do not apply to electronic trip
circuit breakers.
Siemens VL Circuit Breakers
Technical Overview
Technical
Frame Summary and Ratings Table — Continued
Frame Family
Continuous Ampere Range
LG
150 to 600A
Number of Poles
NG
200 to 800A
2, 3
Maximum Voltage Rating
2,3
4
2,3
400 to 1600A
4
3
4
600V
600V
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
5.5 (139)
11 (279)
4.2 (102)
5.4 (138)
7.5 (190) 10 (253)
16 (406)
4.7 (114)
5.9 (151)
—
22
35
—
—
Type H – High Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
100
100
UL
480Vac
65
65
600Vac
25
35
240Vac
100/75
100/75
IEC
415Vac
70/70
70/70
(lCU /lCS)
—
—
—
690Vac
15/8
30/15
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
30
35
—
—
25
50
—
—
Type L – Very High Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
200
200
UL
480Vac
100
100
600Vac
25
50
240Vac
200/150
200/150
IEC
415Vac
100/75
100/75
(lCU /lCS)
—
—
—
690Vac
15/8
35/17
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
30
35
—
—
UL does not recognize AIC ratings for Molded Case
Switches or Motor Circuit Protectors.
Not UL.
42
65
—
—
햴
9 (229) 2, 3-pole / 12 (305) 4-pole
16 (406)
6.2 (157)
8.1 (207)
65
35
25
65/65
50/25
—
20/10
65
35
25
65/65
50/25
—
20/10
22
35
—
—
22
35
—
—
100
65
35
100/75
70/35
—
30/15
100
65
35
100/50
70/35
—
30/15
25
50
—
—
25
50
—
—
200
100
65
200/150
100/75
—
35/17
200
100
65
200/150
100/75
—
35/17
42
65
—
—
42
65
—
—
500Vdc nominal, 600Vdc max. for ungrounded DC UPS
systems.
햵
MOLDED CASE
CIRCUIT BREAKERS
30
25
—
—
—
◆
◆
◆
◆
6
DC Voltages – Interrupting Rating (kA)햵
250Vdc - 2p
500Vdc - 3p햴
600Vdc - 3p
750Vdc - 4p햳
햳
300 to 1200A
600V
Type N – Normal Interrupting Rating햲, RMS Symmetrical Amperes (kA)
240Vac
65
65
UL
480Vac
35
35
600Vac
25
25
240Vac
65/65
65/65
IEC
415Vac
45/45
50/50
(lCU /lCS)
—
—
—
690Vac
12/6
20/10
햲
PG
600V
Type of Protection
Thermal-Magnetic
Electronic
Electronic with LCD
Motor Circuit Protector
Molded Case Switch
100% Rated
50°C Calibrated Breaker햳
Interchangeable Trip Unit
W In.(mm)
H
D
D2
MG
DC Interruption Ratings do not apply to electronic trip
circuit breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-93
VL Circuit Breakers
Trip Unit Overview
Selection
mation menus. With precise control
over the circuit beaker functions and
access to system status, diagnostics,
and information, these trip units allow
for unsurpassed flexibility in circuit
coordination.
The interchangeability of the VL circuit
breaker trip units allow for easy conversion from any of 3 types of protection.
They are thermal-magnetic, electronic,
or electronic with a built-in LCD display.
The thermal-magnetic trip unit features
an adjustable magnetic trip setting. The
electronic trip units are microprocessor
based true RMS sensing devices and
are available with a variety of adjustable
trip settings, configurations, and infor-
An example of coordination is the out
of the box Ground Fault function on the
Model 545 trip units. The pick-up and
time delay settings are fixed for each
frame and do not overlap with the settings on the other frames. Therefore,
when VL breakers are used together in
a system the GF protection is automatically coordinated. The user also has the
ability to program a custom coordination scheme with the high level of
adjustability available on the Model
576 trip units.
VL Trip Units
Trip Unit Functions
Model 576
Electronic
LI
Electronic
LIG
Electronic
LSI
Electronic
LSIG
Electronic with LCD
LSI
Electronic with LCD
LSIG
Continuous Current
Setting (Ir)
Fixed
◆
◆
◆
◆
◆
◆
Long Time Delay (tr)
䊐
◆
◆
Fixed
Fixed
◆
◆
Instantaneous
Overcurrent Setting (Ii)
◆
◆
◆
Fixed
Fixed
◆
◆
Short Time Pick-up (Isd)
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
●
䊐
䊐
䊐
䊐
䊐
䊐
䊐
䊐
◆
◆
◆
䊐
䊐
●
䊐
䊐
䊐
䊐
䊐
◆
◆
◆
(ON/OFF)
(ON/OFF)
◆
◆
䊐
䊐
䊐
●
●
●
●
●
◆
◆
◆
◆
䊐
●
●
●
●
●
Short Time l t Pick-up
2
Ground Fault Pick-up (lg)
Ground Fault Delay (tg)
Alarm & Status LEDs
6
Model 545
ThermalMagnetic
Short Time Delay (tsd)
MOLDED CASE
CIRCUIT BREAKERS
Model 525
Built-in Display (LCD)
Pre-Trip Alarm햲
Last trip information햲
Zone Selective햲
Communications햲
Fixed
Fixed
●
䊐
䊐
䊐
䊐
䊐
Fixed
Fixed
●
䊐
䊐
䊐
䊐
䊐
◆ – Adjustable setting.
● – This feature is included.
“fixed” – Non-Adjustable setting.
䊐 – Feature is not included.
햲 – Requires the trip unit to be connected to a PC (via a COMPRO or COMMOD communications module) for access or programming.
Continuous Amps Rating (Ir)
This setting is the continuous current
that the breaker will carry without tripping. It can be set up to 100% of the trip
unit’s nominal rating (In).
Long Time Delay (tr)
Sometimes referred to as the “overload”
position, this function controls the breaker‘s “pause-in-tripping” time. It allows
low level, temporary inrush currents
such as those encountered when starting a motor to pass without tripping. The
time delay begins when the current
reaches 6 x Ir.
Instantaneous Pick-up (Ii)
This function sets the breaker to trip
instantaneously during high fault conditions. On Model 545 trip units this set6-94
ting is fixed on LSI and LSIG trip units
and adjustable on LI and LIG trip units.
These features are fully adjustable on
Model 576 trip units.
Short Time Pick-Up (lsd)
This function controls the level of fault
current the breaker will carry for a short
time without tripping, thus allowing
downstream devices to clear short circuits ahead of up-stream protection.
It may be defeated (turned-off) on
Model 576 trip units.
Short Time Delay (tsd)
This controls the interval of time the
breaker will remain closed against a fault
(at the Short Time Pick-up current level)
without tripping. The time delay may be
set at fixed points or at short time intervals based on l2t curves. This function is
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
used with the Short Time Pick-up to
achieve selectivity and better system
coordination.
Ground Fault Pick-Up (Ig)
This setting controls the level of ground
fault current that will cause the breaker
to trip. Model 545 Electronic Trip Units
act on the residual current to sense
ground current. The Model 576
Electronic Trip Unit is programmable
and allows the user to select either
the residual current method or direct
detection (via a separate current transformer) to detect ground current.
Ground Fault Time Delay (tg)
This controls the interval of time the
breaker will remain closed after a ground
fault is detected (at the Ground Fault
Pick-up current level) without tripping.
VL Circuit Breakers
General Information
Selection
Thermal-Magnetic trip units, Model 525, combine the inverse time element design for low level overloads, and instantaneous
magnetic action for short circuit protection. The standard unit has preset overload protection and an adjustable instantaneous trip
setting, with 6 set points. Thermal-Magnetic trip units are available throughout the VL family, from 15 to 1600A.
Type/Tipo CLT3
Ii
M4-PAN-TORX
M4-PAN-TORX
I n = 600A
3850
3300
2750
4400
40 C
4950
TM ~
5500
Trip Unit/Disparador 525
Cat. No. CLT3B600
Electronic Trip Units
Electronic trip units are available through
the VL family, from 60A (which can be
set as low as 30A) up through 1600A .
They are also available in four trip
configurations (LI, LIG, LSI, LSIG) and
features can include a built-in LCD
display.
On the Model 545 Electronic Trip Unit a
flashing LED confirms that the
microprocessor in operating and another
indicates an overload condition. For
ease-of-use and to insure proper
coordination, the set points for the
continuous current are shown on the
face of these trip units in amps.
displays, no secondary or auxiliary voltage is required as long as the breaker is
energized and a minimal load current is
present. These trip units can also indicate the “last trip” status (date, time,
amps) when they‘re connected to a PC
via one of our communications modules.
On the Model 576, the LCD version, the
current in each phase is continuously
shown on the display. Unlike many
Typical Trip Unit Labeling and Adjustment Positions
6
Model 545 Electronic Trip Unit
with LSIG trip functions
MOLDED CASE
CIRCUIT BREAKERS
Model 576 Electronic Trip Unit
has an LCD display
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-95
VL Circuit Breakers
DG 150A Frame, VL Series
Selection
Ordering Information
Complete Assembled Breaker
Prices for a complete factory assembled DG breaker include the frame, trip unit,
and standard line and load connectors, all factory installed and shipped as a
complete breaker. Assembled breakers are only available with standard
connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only. For
non-interchangeable trip breakers, change the third digit of the catalog number
to “X” for standard breakers.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
Interrupting Ratings
Breaker
Type
NDG
HDG
LDG
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
18
30
18
65
65
40
40
100
65
20
30
18
100
75
70
70
200
100
25
30
18
200
150
100
75
690
ICU
12
12
12
ICS
6
6
6
Number
of Poles
6
Connectors for 75°C Wire
MOLDED CASE
CIRCUIT BREAKERS
Dimensions, inches (mm)
Ampere
Construction Rating
Steel
30-150
30-150
Aluminum햲
햳
Copper
30-150
Distribution Lugs
Wire
Range
#8–1/0 Cu
#6–3/0 Al/Cu
#6–3/0 Cu
No. of cables
per connector
1
1
1
Catalog
Number
3TW1DG20햳
3TA1DG30햳
3TC1DG30햳
List
Price $
22.00
22.00
101.00
30-150
30-150
Compression Lugs
30-150
30-150
#14–#2 Cu (3pcs. Max)
#14–#4 Cu
3
6
3TA3DG02햳
3TA6DG04햳
110.00
110.00
#14–2/0 kcmil Al/Cu
#14–2/0 kcmil Al/Cu
–
–
2CLD20햴
3CLD20햵
54.00
81.00
2, 3
4
Width
Length
Depth
4.1 (105)
6.9 (175) 3.4 (81)
5.5 (139)
To Handle
D1
4.2(107)
Approx. Shipping Weight, lbs. (kg)
Trip Unit
Complete
Poles Frame Thermal-Mag. Electronic Breaker
2, 3 3.7 (1.7)
4 4.9 (2.2)
2.2 (1.0)
2.6 (1.2)
2.6 (1.2)
3.3 (1.5)
5.9 (2.7)
7.5 (3.4)
햲
Standard connector supplied with complete breakers.
Kit consists of 3 terminal connectors.
2 Lugs for 2-pole breakers.
햵 3 Lugs for 3-pole breakers.
햳
햴
DG Thermal-Magnetic,
Instantaneous Trip
Adjustment Range
Trip Unit Continuous
Amp Rating (In)
50
60
70
80
90
100
110
125
150
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
450
700
450
700
450
700
450
800
500
1000
500
1000
550
1100
625
1250
800
1600
Note: Each breaker has 6 trip settings in this range.
A - Consult with Siemens for availability.
6-96
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Case Circuit Breakers
DG 150A Thermal-Magnetic Trip Unit
Selection
Ii
Type / Tipo CDT3
I n =150A
AMPS
1120
960
800
40? C
1280
TM ~
1440
1600
TRIP UNIT/DISPARADOR 525
Cat. No. - CDT3B150
Model 525 Trip Unit
DG 150A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Catalog
Number
Continuous
Ampere Rating
50
60
70
80
90
100
110
125
150
NDG2F150
List
Price $
618.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HDG2F150
1533.00
L-Interrupting Class
Catalog
Number
LDG2F150
List
Price $
1002.00
1002.00
1074.00
1074.00
1074.00
1074.00
2234.00
2234.00
2234.00
HDG2B050L
HDG2B060L
HDG2B070L
HDG2B080L
HDG2B090L
HDG2B100L
HDG2B110L
HDG2B125L
HDG2B150L
1917.00
1917.00
1989.00
1989.00
1989.00
1989.00
3149.00
3149.00
3149.00
LDG2B050L
LDG2B060L
LDG2B070L
LDG2B080L
LDG2B090L
LDG2B100L
LDG2B110L
LDG2B125L
LDG2B150L
List
Price $
2664.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NDG2B050L
NDG2B060L
NDG2B070L
NDG2B080L
NDG2B090L
NDG2B100L
NDG2B110L
NDG2B125L
NDG2B150L
Catalog
Number
TRIP UNIT ONLY
3048.00
3048.00
3120.00
3120.00
3120.00
3120.00
4280.00
4280.00
4280.00
CDT2B050
CDT2B060
CDT2B070
CDT2B080
CDT2B090
CDT2B100
CDT2B110
CDT2B125
CDT2B150
355.00
355.00
427.00
427.00
427.00
427.00
1587.00
1587.00
1587.00
Catalog
Number
List
Price $
DG 150A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
50
60
70
80
90
100
110
125
150
NDG3F150
768.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HDG3F150
1796.00
L-Interrupting Class
Catalog
Number
LDG3F150
List
Price $
2948.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NDG3B050L
NDG3B060L
NDG3B070L
NDG3B080L
NDG3B090L
NDG3B100L
NDG3B110L
NDG3B125L
NDG3B150L
1227.00
1227.00
1344.00
1344.00
1344.00
1344.00
2793.00
2793.00
2793.00
HDG3B050L
HDG3B060L
HDG3B070L
HDG3B080L
HDG3B090L
HDG3B100L
HDG3B110L
HDG3B125L
HDG3B150L
2255.00
2255.00
2372.00
2372.00
2372.00
2372.00
3821.00
3821.00
3821.00
LDG3B050L
LDG3B060L
LDG3B070L
LDG3B080L
LDG3B090L
LDG3B100L
LDG3B110L
LDG3B125L
LDG3B150L
TRIP UNIT ONLY
3407.00
3407.00
3524.00
3524.00
3524.00
3524.00
4973.00
4973.00
4973.00
CDT3B050
CDT3B060
CDT3B070
CDT3B080
CDT3B090
CDT3B100
CDT3B110
CDT3B125
CDT3B150
416.00
416.00
533.00
533.00
533.00
533.00
1982.00
1982.00
1982.00
Catalog
Number
List
Price $
DG 150A Frame 4-Pole with Thermal-Magnetic Trip Unit A
N-Interrupting Class
Catalog
Number
Continuous
Ampere Rating
50
60
70
80
90
100
110
125
150
NDG4F150
List
Price $
998.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HDG4F150
2335.00
L-Interrupting Class
Catalog
Number
LDG4F150
List
Price $
3833.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NDG4B050L
NDG4B060L
NDG4B070L
NDG4B080L
NDG4B090L
NDG4B100L
NDG4B110L
NDG4B125L
NDG4B150L
1597.00
1597.00
1750.00
1750.00
1750.00
1750.00
3634.00
3634.00
3634.00
HDG4B050L
HDG4B060L
HDG4B070L
HDG4B080L
HDG4B090L
HDG4B100L
HDG4B110L
HDG4B125L
HDG4B150L
2934.00
2934.00
3087.00
3087.00
3087.00
3087.00
4971.00
4971.00
4971.00
LDG4B050L
LDG4B060L
LDG4B070L
LDG4B080L
LDG4B090L
LDG4B100L
LDG4B110L
LDG4B125L
LDG4B150L
TRIP UNIT ONLY
4432.00
4432.00
4585.00
4585.00
4585.00
4585.00
6469.00
6469.00
6469.00
CDT4B050
CDT4B060
CDT4B070
CDT4B080
CDT4B090
CDT4B100
CDT4B110
CDT4B125
CDT4B150
541.00
541.00
694.00
694.00
694.00
694.00
2578.00
2578.00
2578.00
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-97
MOLDED CASE
CIRCUIT BREAKERS
Continuous
Ampere Rating
List
Price $
6
Catalog
Number
VL Circuit Breakers
DG 150A Electronic 3-Knob & LCD Trip Units
Selection
Model 545 Trip Units
DG 150A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Catalog
Number
Continuous
Ampere Rating
NDG3F150
List
Price $
768.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HDG3F150
1796.00
L-Interrupting Class
Catalog
Number
List
Price $
LDG3F150
2948.00
Catalog
Number
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NDG3N060L
NDG3N100L
NDG3N150L
1591.00
1709.00
3157.00
60
100
150
NDG3P060L
NDG3P100L
NDG3P150L
1925.00
2043.00
3492.00
60
100
150
NDG3U060L
NDG3U100L
NDG3U150L
3806.00
3923.00
5372.00
60
100
150
NDG3X060L
NDG3X100L
NDG3X150L
3472.00
3590.00
5038.00
TRIP UNIT ONLY
LDG3N060L
LDG3N100L
LDG3N150L
3771.00
3889.00
5337.00
CDT3N060
CDT3N100
CDT3N150
780.00
898.00
2346.00
LDG3P060L
LDG3P100L
LDG3P150L
4105.00
4223.00
5672.00
CDT3P060
CDT3P100
CDT3P150
1114.00
1232.00
2681.00
LDG3U060L
LDG3U100L
LDG3U150L
5986.00
6103.00
7552.00
CDT3U060
CDT3U100
CDT3U150
2995.00
3112.00
4561.00
LDG3X060L
LDG3X100L
LDG3X150L
5652.00
5770.00
7218.00
CDT3X060
CDT3X100
CDT3X150
2661.00
2779.00
4227.00
Catalog
Number
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
6
60
100
150
ELECTRONIC LI TRIP
HDG3N060L
2619.00
HDG3N100L
2737.00
HDG3N150L
4185.00
ELECTRONIC LSI TRIP
HDG3P060L
2953.00
HDG3P100L
3071.00
HDG3P150L
4520.00
ELECTRONIC LSIG TRIP
HDG3U060L
4834.00
HDG3U100L
4951.00
HDG3U150L
6400.00
ELECTRONIC LIG TRIP
HDG3X060L
4500.00
HDG3X100L
4618.00
HDG3X150L
6066.00
List
Price $
Model 576 Trip Unit
DG 150A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Catalog
Number
Continuous
Ampere Rating
6-98
NDG3F150
List
Price $
768.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HDG3F150
1796.00
L-Interrupting Class
Catalog
Number
List
Price $
LDG3F150
2948.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
60
100
150
NDG3D060L
NDG3D100L
NDG3D150L
2092.00
2226.00
3894.00
60
100
150
NDG3E060L
NDG3E100L
NDG3E150L
3974.00
4108.00
5775.00
LCD ELECTRONIC LSI TRIP
HDG3D060L
3120.00
HDG3D100L
3254.00
HDG3D150L
4922.00
LCD ELECTRONIC LSIG TRIP
HDG3E060L
5002.00
HDG3E100L
5136.00
HDG3E150L
6803.00
TRIP UNIT ONLY
LDG3D060L
LDG3D100L
LDG3D150L
4272.00
4406.00
6074.00
CDT3D060
CDT3D100
CDT3D150
1281.00
1415.00
3083.00
LDG3E060L
LDG3E100L
LDG3E150L
6154.00
6288.00
7955.00
CDT3E060
CDT3E100
CDT3E150
3163.00
3297.00
4964.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for DG 150A and FG 250A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
1 Alarm Switch
1A/B햴
Bases AMBL2 & AMBL3
2 Aux. Switches
1A + 1B
Bases AMBL1
2 Aux. + 1 Alarm Switch
1A + 1B, 1A/B햴
Bases AMBL2 & AMBL3
Mounting Pocket햲
Catalog Number
List Price $
Left, Right햳
ASKL1
265.00
Left, Right, Neutral
ASKL2
265.00
Left, Right햳
ASKL3
530.00
Auxiliary/Alarm Switch Mounting Base Only
Description
Up to 3 Auxiliary Switches
2 Aux. + 1 Alarm Switch
2 Aux. + 1 Alarm Switch
Mounting Pocket
Left, Right, Neutral
Left Pocket Only
Right Pocket Only
Catalog Number
AMBL1
AMBL2
AMBL3
List Price $
61.00
61.00
61.00
Auxiliary/Alarm Switch Only
Common to DG - PG Frames
Description
1 Normally Open Contact (1A)
1 Normally Closed Contact (1B)
Catalog Number
ASWPA
ASWPB
List Price $
108.00
108.00
Shunt Trips
Mounting Pocket
Right Pocket Only
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
MOLDED CASE
CIRCUIT BREAKERS
Catalog Number
STRLB24DC
STRLC60DC
STRLD125DC
STRLE250DC
STRLM60
STRLN120
STRLS277
STRLV600
6
Description
24 VDC
48-60 VDC
110-127 VDC
220-250 VDC
48-60 VAC
110-127 VAC
208-277 VAC
380-600 VAC
Undervoltage Release
Description
12 VDC
24 VDC
48 VDC
60 VDC
110-127 VDC
220-250 VDC
110-127 VAC
220-240 VAC
208 VAC
277 VAC
380-415 VAC
440-480 VAC
600 VAC
Mounting Pocket
Right Pocket Only
Catalog Number
UVRLA12DC
UVRLB24DC
UVRLC48DC
UVRLG60DC
UVRLD125DC
UVRLE250DC
UVRLN120
UVRLR240
UVRLP208
UVRLS277
UVRLT415
UVRLU480
UVRLV600
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory
combinations.
햳 These kits include two bases, one for mounting switches in the left pocket and another for mounting in the right.
햴 Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.
Discount Schedule MCCB
External Accessories pages 6-125 through 6-139
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-99
VL Circuit Breakers
FG 250A Frame, VL Series
Selection/Dimensions
Ordering Information
Complete Assembled Breaker
Prices for a complete factory assembled FG breaker include the frame, trip
unit, and standard line and load connectors, all factory installed and shipped
as a complete breaker. Assembled breakers are available only with standard
connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only.
For non-interchangeable trip breakers, change the third digit of the catalog
number to “X” for standard breakers.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
Number
of Poles
Interrupting Ratings
Breaker
Type
NFG
HFG
LFG
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
18
30
18
65
65
40
40
100
65
20
30
25
100
75
70
70
200
100
25
30
30
200
150
100
75
2, 3
4
6
Width
Length
Depth
To Handle
D1
4.1 (105)
6.9 (175) 3.4 (81) 4.2 (107)
5.5 (139)
Shipping Weight, lbs. (kg)
690
ICU
12
12
12
ICS
6
6
6
Trip Unit
Poles Frame
2, 3 4.0 (1.8)
4 5.3 (2.4)
Thermal-Mag.
Electronic
Complete
Breaker
2.2 (1.0)
2.6 (1.2)
2.6 (1.2)
3.3 (1.5)
6.2 (2.8)
7.9 (3.6)
EnclosuresA
Connectors for 75°C Wire
MOLDED CASE
CIRCUIT BREAKERS
Dimensions, inches (mm)
Ampere
Construction Rating
Steel
50-250
50-250
Aluminum햲
Copper
50-250
Distribution Lugs
Wire
Range
#4–350 kcmil Cu
#4–350 kcmil Al/Cu
#4–350 kcmil Cu
No. of cables
per connector
1
1
1
Catalog
Number
3TW1FG350햳
3TAW1FG350햳
3TCW1FG350햳
List
Price $
65.00
65.00
104.00
50-250
50-250
Compression Lugs
50-250
50-250
#12–2/0 Cu
#14–#4 Cu
3
6
3TA3FG20햳
3TA6FG04햳
110.00
110.00
#6–350 kcmil Al/Cu
#6–350 kcmil Al/Cu
–
–
2CLF350햴
3CLF350햵
102.00
152.00
NEMA Class
Catalog Number
List
Price $
1 (Flush)
1 (Surface)
1 (Surface)
3R
4 – 4X
7-9
12
Neutral
FG0251F
FG0221S (225A max)
FG0251S (250A)
FG0253R
FG0254S
FG02579
FG02512
(future)
CSO
CSO
CSO
CSO
CSO
CSO
CSO
—
햲
Standard connector supplied with complete breakers.
Kit consists of 3 terminal connectors.
2 Lugs for 2-pole breakers.
햵 3 Lugs for 3-pole breakers.
햳
햴
FG Thermal-Magnetic,
Instantaneous Trip
Adjustment Range
Trip Unit Continuous
Amp Rating (In)
100
110
125
150
175
200
225
250
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
625
800
800
800
1000
1000
1250
1250
1250
1600
1600
1600
2000
2000
2500
2500
Note: Each breaker has 6 trip settings in this range.
A - Consult with Siemens for availability.
6-100
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
FG 250A Thermal-Magnetic Trip Unit
Selection
Ii
Type / Tipo CFT3
I n =250A
AMPS
1750
1500
40? C
2000
TM ~
2250
1250
2500
TRIP UNIT/DISPARADOR 525
Cat. No. - CFT3B250
Model 525 Trip Unit
FG 250A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
100
110
125
150
175
200
225
250
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NFG2F250
1128.00
FRAME ONLY
HFG2F250
2994.00
L-Interrupting Class
Catalog
Number
LFG2F250
List
Price $
2374.00
2374.00
2374.00
2374.00
2374.00
2374.00
2374.00
2999.00
HFG2B100L
HFG2B110L
HFG2B125L
HFG2B150L
HFG2B175L
HFG2B200L
HFG2B225L
HFG2B250L
4240.00
4240.00
4240.00
4240.00
4240.00
4240.00
4240.00
4865.00
LFG2B100L
LFG2B110L
LFG2B125L
LFG2B150L
LFG2B175L
LFG2B200L
LFG2B225L
LFG2B250L
List
Price $
4505.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NFG2B100L
NFG2B110L
NFG2B125L
NFG2B150L
NFG2B175L
NFG2B200L
NFG2B225L
NFG2B250L
Catalog
Number
TRIP UNIT ONLY
5751.00
5751.00
5751.00
5751.00
5751.00
5751.00
5751.00
6376.00
CFT2B100
CFT2B110
CFT2B125
CFT2B150
CFT2B175
CFT2B200
CFT2B225
CFT2B250
1158.00
1158.00
1158.00
1158.00
1158.00
1158.00
1158.00
1783.00
Catalog
Number
List
Price $
FG 250A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Catalog
Number
List
Price $
NFG3F250
1388.00
FRAME ONLY
HFG3F250
3493.00
L-Interrupting Class
Catalog
Number
LFG3F250
List
Price $
4971.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NFG3B100L
NFG3B110L
NFG3B125L
NFG3B150L
NFG3B175L
NFG3B200L
NFG3B225L
NFG3B250L
2882.00
2882.00
2882.00
2882.00
2882.00
2882.00
2882.00
3617.00
HFG3B100L
HFG3B110L
HFG3B125L
HFG3B150L
HFG3B175L
HFG3B200L
HFG3B225L
HFG3B250L
4987.00
4987.00
4987.00
4987.00
4987.00
4987.00
4987.00
5722.00
LFG3B100L
LFG3B110L
LFG3B125L
LFG3B150L
LFG3B175L
LFG3B200L
LFG3B225L
LFG3B250L
TRIP UNIT ONLY
6465.00
6465.00
6465.00
6465.00
6465.00
6465.00
6465.00
7200.00
CFT3B100
CFT3B110
CFT3B125
CFT3B150
CFT3B175
CFT3B200
CFT3B225
CFT3B250
1362.00
1362.00
1362.00
1362.00
1362.00
1362.00
1362.00
2097.00
Catalog
Number
List
Price $
FG 250A Frame 4-Pole with Thermal-Magnetic Trip UnitA
N-Interrupting Class
Continuous
Ampere Rating
100
110
125
150
175
200
225
250
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NFG4F250
1805.00
FRAME ONLY
HFG4F250
4542.00
L-Interrupting Class
Catalog
Number
LFG4F250
List
Price $
6463.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NFG4B100L
NFG4B110L
NFG4B125L
NFG4B150L
NFG4B175L
NFG4B200L
NFG4B225L
NFG4B250L
3752.00
3752.00
3752.00
3752.00
3752.00
3752.00
3752.00
4707.00
HFG4B100L
HFG4B110L
HFG4B125L
HFG4B150L
HFG4B175L
HFG4B200L
HFG4B225L
HFG4B250L
6489.00
6489.00
6489.00
6489.00
6489.00
6489.00
6489.00
7444.00
LFG4B100L
LFG4B110L
LFG4B125L
LFG4B150L
LFG4B175L
LFG4B200L
LFG4B225L
LFG4B250L
TRIP UNIT ONLY
8410.00
8410.00
8410.00
8410.00
8410.00
8410.00
8410.00
9365.00
CFT4B100
CFT4B110
CFT4B125
CFT4B150
CFT4B175
CFT4B200
CFT4B225
CFT4B250
1771.00
1771.00
1771.00
1771.00
1771.00
1771.00
1771.00
2726.00
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-101
MOLDED CASE
CIRCUIT BREAKERS
100
110
125
150
175
200
225
250
List
Price $
6
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
VL Circuit Breakers
FG 250A Electronic 3-Knob & LCD Trip Units
Selection
Model 545 Trip Units
FG 250A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
List
Price $
Catalog
Number
List
Price $
NFG3F250
1388.00
FRAME ONLY
HFG3F250
3493.00
L-Interrupting Class
Catalog
Number
List
Price $
LFG3F250
4971.00
Catalog
Number
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
100
150
250
NFG3N100L
NFG3N150L
NFG3N250L
3325.00
3325.00
4060.00
100
150
250
NFG3P100L
NFG3P150L
NFG3P250L
3659.00
3659.00
4393.00
100
150
250
NFG3U100L
NFG3U150L
NFG3U250L
5540.00
5540.00
6273.00
100
150
250
NFG3X100L
NFG3X150L
NFG3X250L
5206.00
5206.00
5941.00
ELECTRONIC LI TRIP
HFG3N100L
5430.00
HFG3N150L
5430.00
HFG3N250L
6165.00
ELECTRONIC LSI TRIP
HFG3P100L
5764.00
HFG3P150L
5764.00
HFG3P250L
6498.00
ELECTRONIC LSIG TRIP
HFG3U100L
7645.00
HFG3U150L
7645.00
HFG3U250L
8378.00
ELECTRONIC LIG TRIP
HFG3X100L
7311.00
HFG3X150L
7311.00
HFG3X250L
8046.00
List
Price $
TRIP UNIT ONLY
LFG3N100L
LFG3N150L
LFG3N250L
6908.00
6908.00
7643.00
CFT3N100
CFT3N150
CFT3N250
1805.00
1805.00
2540.00
LFG3P100L
LFG3P150L
LFG3P250L
7242.00
7242.00
7976.00
CFT3P100
CFT3P150
CFT3P250
2139.00
2139.00
2873.00
LFG3U100L
LFG3U150L
LFG3U250L
9123.00
9123.00
9856.00
CFT3U100
CFT3U150
CFT3U250
4020.00
4020.00
4753.00
LFG3X100L
LFG3X150L
LFG3X250L
8789.00
8789.00
9524.00
CFT3X100
CFT3X150
CFT3X250
3686.00
3686.00
4421.00
Catalog
Number
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
6
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
Model 576 Trip Unit
FG 250A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
6-102
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NFG3F250
1388.00
FRAME ONLY
HFG3F250
3493.00
L-Interrupting Class
Catalog
Number
List
Price $
LFG3F250
4971.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
100
150
250
NFG3D100L
NFG3D150L
NFG3D250L
3980.00
3980.00
4825.00
100
150
250
NFG3E100L
NFG3E150L
NFG3E250L
5861.00
5861.00
6705.00
LCD ELECTRONIC LSI TRIP
HFG3D100L
6085.00
HFG3D150L
6085.00
HFG3D250L
6930.00
LCD ELECTRONIC LSIG TRIP
HFG3E100L
7966.00
HFG3E150L
7966.00
HFG3E250L
8810.00
TRIP UNIT ONLY
LFG3D100L
LFG3D150L
LFG3D250L
7563.00
7563.00
8408.00
CFT3D100
CFT3D150
CFT3D250
2460.00
2460.00
3305.00
LFG3E100L
LFG3E150L
LFG3E250L
9444.00
9444.00
10288.00
CFT3E100
CFT3E150
CFT3E250
4341.00
4341.00
5185.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for DG 150A and FG 250A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
1 Alarm Switch
1A/B햴
Bases AMBL2 & AMBL3
2 Aux. Switches
1A + 1B
Bases AMBL1
2 Aux. + 1 Alarm Switches
1A + 1B, 1A/B햴
Bases AMBL2 & AMBL3
Mounting Pocket햲
Catalog Number
List Price $
Left, Right햳
ASKL1
265.00
Left, Right, Neutral
ASKL2
265.00
Left, Right햳
ASKL3
530.00
Auxiliary/Alarm Switch Mounting Base Only
Description
Up to 3 Auxiliary Switches
2 Aux. + 1 Alarm Switch
2 Aux. + 1 Alarm Switch
Mounting Pocket
Left, Right, Neutral
Left Pocket Only
Right Pocket Only
Catalog Number
AMBL1
AMBL2
AMBL3
List Price $
61.00
61.00
61.00
Auxiliary/Alarm Switch Only
Common to DG - PG Frames
Description
1 Normally Open Contact (1A)
1 Normally Closed Contact (1B)
Catalog Number
ASWPA
ASWPB
List Price $
108.00
108.00
Shunt Trips
Mounting Pocket
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
Catalog Number
UVRLA12DC
UVRLB24DC
UVRLC48DC
UVRLG60DC
UVRLD125DC
UVRLE250
UVRLN120
UVRLR240
UVRLP208
UVRLS277
UVRLT415
UVRLU480
UVRLV600
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
MOLDED CASE
CIRCUIT BREAKERS
Right Pocket Only
Catalog Number
STRLB24DC
STRLC60DC
STRLD125DC
STRLE250DC
STRLM60
STRLN120
STRLS277
STRLV600
6
Description
24 VDC
48-60 VDC
110-127 VDC
220-250 VDC
48-60 VAC
110-127 VAC
208-277 VAC
380-600 VAC
Undervoltage Release
Description
12 VDC
24 VDC
48 VDC
60 VDC
110-127 VDC
220-250 VDC
110-127 VAC
220-240 VAC
208 VAC
277 VAC
380-415 VAC
440-480 VAC
600 VAC
Mounting Pocket
Right Pocket Only
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory
combinations.
햳 These kits include two bases, one for mounting switches in the left pocket and another for mounting in the right.
햴 Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.
Discount Schedule MCCB
External Accessories pages 6-125 through 6-139
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-103
VL Circuit Breakers
JG 400A Frame, VL Series
Selection/Dimensions
Ordering Information
Complete Assembled Breaker
Prices for a complete factory assembled JG breaker include the frame, trip
unit, and standard line and load connectors, all factory installed and shipped
as a complete breaker. Assembled breakers are available only with
standard connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only. For
non-interchangeable trip breakers, change the third digit of the catalog number
to “X” for standard breakers.
100% Rated: For 100% rated breakers (or frames) with an interchangeable trip
unit, change the 3rd character of the catalog name to ”H”.
For 100% rated breakers with a non-interchangeable trip unit, change the 3rd
character of the catalog number to ”Y“.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
Dimensions, inches (mm)
Number
of Poles
2, 3
4
Interrupting Ratings
MOLDED CASE
CIRCUIT BREAKERS
6
Breaker
Type
NJG
HJG
LJG
RMS Symmetrical Amperes (KA)
UL 489 AIR (File E10848)
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
25
30
25
65
65
45
45
100
65
25
30
35
100
75
70
70
200
100
25
30
35
200
150
100
75
Length
Depth
To Handle
D1
5.5 (139)
11 (279) 4.2 (102) 5.4 (138)
7.2 (183)
Shipping Weight, lbs. (kg)
Trip Unit
690
ICU
12
15
15
ICS
6
8
8
Poles
Frame
Thermal-Mag. Electronic
2, 3 9.3 (4.2)
4 12.1 (5.5)
4.0 (1.8)
5.0 (2.3)
Complete
Breaker
4.0 (1.8) 12.6 (5.7)
5.0 (2.3) 16.3 (7.4)
EnclosuresA
Connectors for 75°C Wire
Ampere
Construction Rating
Steel
70-400
70-400
Aluminum햲
Aluminum
70-400
Aluminum
70-400
Copper
70-400
Copper
70-400
Distribution Lugs
Wire
Range
1/0–600 kcmil Cu
3/0–250 kcmil Al/Cu
250–750 kcmil Al
3/0–600 kcmil Cu
3/0–750 kcmil Cu
3/0–250 kcmil Cu
No. of cables
per connector
1
2
1
1
1
2
Catalog
Number
3TW1JG600햳
3TA2JG250햳
3TA1JG750햳
3TA1JG750햳
TC1JG750햵
TC2JG250
List
Price $
87.00
87.00
109.00
109.00
77.00
77.00
70-400
70-400
Compression Lugs
70-400
70-400
70-400
#14–4 Cu
#14–2/0 Cu
12
6
3TA12JG04햳
3TA6JG20햳
265.00
265.00
3CLJ600햴
3CLJ350
3CLJ750
449.00
449.00
449.00
250–600 kcmil Al/Cu
#6–350 kcmil
250–750 kcmil
Width
–
–
–
NEMA Class
Catalog Number
List
Price $
1
JG0401S
CSO
1 (Compact)
3R
3R (Compact)
7-9
12
Neutral
JG0401SC
JG0403R
JG0403RC
JG03579 (350A max)
JG04012
(future)
CSO
CSO
CSO
CSO
CSO
—
햲
Standard construction supplied for each breaker.
Kit consists of 3 terminal connectors.
3 Lugs for 3-pole breakers.
햵 For 100% rate applications, 90°C.
햳
햴
JG Thermal-Magnetic,
Instantaneous
Trip Adjustment Range
Trip Unit Continuous
Amp Rating (In)
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
250
1250
2500
300
1500
3000
350
400
1750
2000
3500
4000
Note: Each breaker has 6 trip settings in this range.
A - Consult with Siemens for availability.
6-104
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
JG 400A Thermal-Magnetic Trip Unit
Selection
Ii
M4-PAN-TORX
M4-PAN-TORX
AMPS
2800
2400
2000
I n = 400A
3200
40 C
3600
TM ~
4000
Trip Unit/Disparador 525
Model 525 Trip Unit
JG 400A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
250
300
350
400
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
NJG2F400
1600.00
FRAME ONLY
HJG2F400
3842.00
NJG2B250L
NJG2B300L
NJG2B350L
NJG2B400L
List
Price $
COMPLETE FACTORY ASSEMBLED CIRCUIT
3210.00
HJG2B250L
5452.00
3210.00
HJG2B300L
5452.00
3210.00
HJG2B350L
5452.00
3210.00
HJG2B400L
5452.00
L-Interrupting Class
Catalog
Number
List
Price $
LJG2F400
5208.00
BREAKER
LJG2B250L
LJG2B300L
LJG2B350L
LJG2B400L
6818.00
6818.00
6818.00
6818.00
Catalog
Number
List
Price $
TRIP UNIT ONLY
CJT2B250
1494.00
CJT2B300
1494.00
CJT2B350
1494.00
CJT2B400
1494.00
JG 400A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
250
300
350
400
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
NJG3F400
1972.00
FRAME ONLY
HJG3F400
4484.00
NJG3B250L
NJG3B300L
NJG3B350L
NJG3B400L
List
Price $
COMPLETE FACTORY ASSEMBLED CIRCUIT
3903.00
HJG3B250L
6415.00
3903.00
HJG3B300L
6415.00
3903.00
HJG3B350L
6415.00
3903.00
HJG3B400L
6415.00
L-Interrupting Class
Catalog
Number
List
Price $
LJG3F400
5740.00
BREAKER
LJG3B250L
LJG3B300L
LJG3B350L
LJG3B400L
7671.00
7671.00
7671.00
7671.00
Catalog
Number
List
Price $
TRIP UNIT ONLY
CJT3B250
1757.00
CJT3B300
1757.00
CJT3B350
1757.00
CJT3B400
1757.00
Continuous
Ampere Rating
250
300
350
400
H-Interrupting Class
List
Price $
Catalog
Number
NJG4F400
2563.00
FRAME ONLY
HJG4F400
5829.00
NJG4B250L
NJG4B300L
NJG4B350L
NJG4B400L
List
Price $
COMPLETE FACTORY ASSEMBLED CIRCUIT
5080.00
HJG4B250L
8346.00
5080.00
HJG4B300L
8346.00
5080.00
HJG4B350L
8346.00
5080.00
HJG4B400L
8346.00
L-Interrupting Class
Catalog
Number
List
Price $
LJG4F400
7462.00
BREAKER
LJG4B250L
LJG4B300L
LJG4B350L
LJG4B400L
9979.00
9979.00
9979.00
9979.00
Catalog
Number
List
Price $
TRIP UNIT ONLY
CJT4B250
2285.00
CJT4B300
2285.00
CJT4B350
2285.00
CJT4B400
2285.00
JJ 400A Frame 240V max., 2-pole with Thermal-Magnetic Non-Interchangeable Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
250
300
350
400
Catalog
Number
List
Price $
COMPLETE BREAKER
NJJ2B250L
2642.00
NJJ2B300L
2642.00
NJJ2B350L
2642.00
NJJ2B400L
2642.00
JJ 400A Frame 240V max., 3-pole with Thermal-Magnetic Non-Interchangeable Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
250
300
350
400
Catalog
Number
List
Price $
COMPLETE BREAKER
NJJ3B250L
3192.00
NJJ3B300L
3192.00
NJJ3B350L
3192.00
NJJ3B400L
3192.00
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-105
MOLDED CASE
CIRCUIT BREAKERS
N-Interrupting Class
Catalog
Number
6
JG 400A Frame 4-Pole with Thermal-Magnetic Trip UnitA
VL Circuit Breakers
JG 400A Electronic 3-Knob & LCD Trip Units
Selection
Model 545 Trip Units
JG 400A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NJG3F400
1972.00
FRAME ONLY
HJG3F400
4484.00
L-Interrupting Class
Catalog
Number
List
Price $
LJG3F400
5740.00
Catalog
Number
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NJG3N250L
NJG3N400L
4468.00
4468.00
250
400
NJG3P250L
NJG3P400L
4800.00
4800.00
250
400
NJG3U250L
NJG3U400L
6682.00
6682.00
250
400
NJG3X250L
NJG3X400L
6347.00
6347.00
TRIP UNIT ONLY
LJG3N250L
LJG3N400L
8236.00
8236.00
CJT3N250
CJT3N400
2322.00
2322.00
LJG3P250L
LJG3P400L
8568.00
8568.00
CJT3P250
CJT3P400
2654.00
2654.00
LJG3U250L
LJG3U400L
10450.00
10450.00
CJT3U250
CJT3U400
4536.00
4536.00
LJG3X250L
LJG3X400L
10115.00
10115.00
CJT3X250
CJT3X400
4201.00
4201.00
Catalog
Number
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
6
250
400
ELECTRONIC LI TRIP
HJG3N250L
6980.00
HJG3N400L
6980.00
ELECTRONIC LSI TRIP
HJG3P250L
7312.00
HJG3P400L
7312.00
ELECTRONIC LSIG TRIP
HJG3U250L
9194.00
HJG3U400L
9194.00
ELECTRONIC LIG TRIP
HJG3X250L
8859.00
HJG3X400L
8859.00
List
Price $
Model 576 Trip Unit
JG 400A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
6-106
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NJG3F400
1972.00
FRAME ONLY
HJG3F400
4484.00
L-Interrupting Class
Catalog
Number
List
Price $
LJG3F400
5740.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
250
400
NJG3D250L
NJG3D400L
5198.00
5198.00
250
400
NJG3E250L
NJG3E400L
7080.00
7080.00
LCD ELECTRONIC LSI TRIP
HJG3D250L
7710.00
HJG3D400L
7710.00
LCD ELECTRONIC LSIG TRIP
HJG3E250L
9592.00
HJG3E400L
9592.00
TRIP UNIT ONLY
LJG3D250L
LJG3D400L
8966.00
8966.00
CJT3D250
CJT3D400
3052.00
3052.00
LJG3E250L
LJG3E400L
10848.00
10848.00
CJT3E250
CJT3E400
4934.00
4934.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for JG 400A and LG 600A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
1 Alarm Switch
1A/B햴
Bases AMBL2 & AMBL3
2 Aux. Switches
1A + 1B
Bases AMBL1
2 Aux. + 1 Alarm Switches
1A + 1B, 1A/B햴
Bases AMBL2 & AMBL3
Mounting Pocket햲
Catalog Number
List Price $
Left, Right햳
ASKL1
265.00
Left, Right, Neutral
ASKL2
265.00
Left, Right햳
ASKL3
530.00
Auxiliary/Alarm Switch Mounting Base Only
Description
Up to 3 Auxiliary Switches
2 Aux. + 1 Alarm Switch
2 Aux. + 1 Alarm Switch
Mounting Pocket
Left, Right, Neutral
Left Pocket Only
Right Pocket Only
Catalog Number
AMBL1
AMBL2
AMBL3
List Price $
61.00
61.00
61.00
Auxiliary/Alarm Switch Only
Common to DG - PG Frames
Description
1 Normally Open Contact (1A)
1 Normally Closed Contact (1B)
Catalog Number
ASWPA
ASWPB
List Price $
108.00
108.00
Shunt Trips
Mounting Pocket
Right Pocket Only
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
Catalog Number
UVRLA12DC
UVRLB24DC
UVRLC48DC
UVRLG60DC
UVRLD125DC
UVRLE250DC
UVRLN120
UVRLR240
UVRLP208
UVRLS277
UVRLT415
UVRLU480
UVRLV600
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
MOLDED CASE
CIRCUIT BREAKERS
Catalog Number
STRLB24DC
STRLC60DC
STRLD125DC
STRLE250DC
STRLM60
STRLN120
STRLS277
STRLV600
6
Description
24 VDC
48-60 VDC
110-127 VDC
220-250 VDC
48-60 VAC
110-127 VAC
208-277 VAC
380-600 VAC
Undervoltage Release
Description
12 VDC
24 VDC
48 VDC
60 VDC
110-127 VDC
220-250 VDC
110-127 VAC
220-240 VAC
208 VAC
277 VAC
380-415 VAC
440-480 VAC
600 VAC
Mounting Pocket
Right Pocket Only
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory
combinations.
햳 Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.
Discount Schedule MCCB
External Accessories pages 6-125 through 6-139
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-107
VL Circuit Breakers
LG 600A Frame, VL Series
Selection/Dimensions
Ordering Information
Complete Assembled Breaker
Prices for a complete factory assembled LG breaker include the frame, trip unit,
and standard line and load lugs, all factory installed and shipped as a complete
breaker. Assembled breakers are available only with standard connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only.
Change the third digit of the catalog number to “X” for non-interchangeable
trip unit.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
A Toggle Handle Extension is included with each frame or complete breaker.
Dimensions, inches (mm)
Interrupting Ratings
Breaker
Type
NLG
HLG
LLG
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
25
30
25
65
65
45
45
100
65
25
30
35
100
75
70
70
200
100
25
30
35
200
150
100
75
Number
of Poles
690
ICU
12
15
15
ICS
6
8
8
2, 3
4
Width
Length
Depth
To Handle
D1
5.5 (139)
11 (279) 4.2 (102) 5.4 (138)
7.2 (183)
Ext.
Shield
13.6
(345.5)
Shipping Weight, lbs. (kg)
MOLDED CASE
CIRCUIT BREAKERS
6
Connectors for 75°C Wire
Ampere
Construction Rating
Aluminum햲
150-600
150-600
Aluminum햲
Copper
150-600
Copper
150-600
Compression Lugs
150-600
150-600
150-600
Trip Unit
Poles Frame
Wire
Range
#2/0–600 kcmil Al/Cu
#2/0–600 kcmil Al/Cu
#2/0–600 kcmil Cu
#2/0–600 kcmil Cu
No. of cables
per connector
2 (load side)
2 (line side)
2 (load side)
2 (line side)
Catalog
Number햳
3TA2LG600LD
3TA2LG600LN
3TC2LG600LD
3TC2LG600LN
List
Price $
109.00
109.00
231.00
231.00
#6–350 kcmil Al/Cu
250-750 kcmil Al/Cu
250-600 kcmil Al/Cu
–
–
–
6CLL350햴
3CLL750햵
6CLL600햴
899.00
494.00
899.00
햲
Standard construction supplied for each breaker.
Kit consists of 3 terminal connectors.
햴 Kit consists of 6 lugs for Line or Load end.
햵 Kit consists of 3 lugs for Line or Load end.
햳
2, 3 17.4 (7.9)
4 23.2 (10.5)
Thermal-Mag.
3.5 (1.6)
4.6 (2.1)
Electronic
Complete
Breaker
4.2 (1.9) 20.9 (9.5)
5.5 (2.5) 27.8 (12.6)
EnclosuresA
NEMA Class
Catalog Number
List
Price $
1
3R
4 – 4X
7-9
12
Neutral
LG0601S
LG0603R
LG0604S
LG06079
LG06012
(future)
CSO
CSO
CSO
CSO
CSO
—
LG Thermal-Magnetic,
Instantaneous
Trip Adjustment Range
Trip Unit Continuous
Amp Rating (In)
400
500
600
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
2000
2500
2750
4000
5000
5500
Note: Each breaker has 6 trip settings.
A - Consult with Siemens for availability.
6-108
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
LG 600A Thermal-Magnetic Trip Unit
Selection
Type/Tipo CLT3
Ii
M4-PAN-TORX
M4-PAN-TORX
I n = 600A
3850
3300
4400
40 C
4950
2750
TM ~
5500
Trip Unit/Disparador 525
Cat. No. CLT3B600
Model 525 Trip Unit
LG 600A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
400
500
600
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NLG2F600
2869.00
FRAME ONLY
HLG2F600
4023.00
L-Interrupting Class
Catalog
Number
LLG2F600
List
Price $
5148.00
5148.00
5148.00
HLG2B400L
HLG2B500L
HLG2B600L
6302.00
6302.00
6302.00
LLG2B400L
LLG2B500L
LLG2B600L
List
Price $
6809.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NLG2B400L
NLG2B500L
NLG2B600L
Catalog
Number
TRIP UNIT ONLY
9088.00
9088.00
9088.00
CLT2B400
CLT2B500
CLT2B600
2135.00
2135.00
2135.00
Catalog
Number
List
Price $
LG 600A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
List
Price $
Catalog
Number
List
Price $
NLG3F600
3548.00
FRAME ONLY
HLG3F600
4684.00
L-Interrupting Class
Catalog
Number
LLG3F600
List
Price $
7508.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NLG3B400L
NLG3B500L
NLG3B600L
6276.00
6276.00
6276.00
HLG3B400L
HLG3B500L
HLG3B600L
7412.00
7412.00
7412.00
LLG3B400L
LLG3B500L
LLG3B600L
TRIP UNIT ONLY
10236.00
10236.00
10236.00
CLT3B400
CLT3B500
CLT3B600
2512.00
2512.00
2512.00
6
400
500
600
H-Interrupting Class
Catalog
Number
MOLDED CASE
CIRCUIT BREAKERS
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-109
VL Circuit Breakers
LG 600A Electronic 3-Knob & LCD Trip Units
Selection
Model 545 Trip Unit
LG 600A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NLG3F600
3548.00
FRAME ONLY
HLG3F600
4684.00
L-Interrupting Class
Catalog
Number
List
Price $
LLG3F600
7508.00
Catalog
Number
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NLG3N400L
NLG3N600L
6865.00
6865.00
400
600
NLG3P400L
NLG3P600L
7200.00
7200.00
400
600
NLG3U400L
NLG3U600L
9128.00
9128.00
400
600
NLG3X400L
NLG3X600L
8794.00
8794.00
TRIP UNIT ONLY
LLG3N400L
LLG3N600L
10825.00
10825.00
CLT3N400
CLT3N600
3101.00
3101.00
LLG3P400L
LLG3P600L
11160.00
11160.00
CLT3P400
CLT3P600
3436.00
3436.00
LLG3U400L
LLG3U600L
13088.00
13088.00
CLT3U400
CLT3U600
5364.00
5364.00
LLG3X400L
LLG3X600L
12754.00
12754.00
CLT3X400
CLT3X600
5030.00
5030.00
Catalog
Number
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
6
400
600
ELECTRONIC LI TRIP
HLG3N400L
8001.00
HLG3N600L
8001.00
ELECTRONIC LSI TRIP
HLG3P400L
8336.00
HLG3P600L
8336.00
ELECTRONIC LSIG TRIP
HLG3U400L
10264.00
HLG3U600L
10264.00
ELECTRONIC LIG TRIP
HLG3X400L
9930.00
HLG3X600L
9930.00
List
Price $
Model 576 Trip Unit
LG 600A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
6-110
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NLG3F600
3548.00
FRAME ONLY
HLG3F600
4684.00
L-Interrupting Class
Catalog
Number
List
Price $
LLG3F600
7508.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
400
600
NLG3D400L
NLG3D600L
7714.00
7714.00
400
600
NLG3E400L
NLG3E600L
9643.00
9643.00
LCD ELECTRONIC LSI TRIP
HLG3D400L
8850.00
HLG3D600L
8850.00
LCD ELECTRONIC LSIG TRIP
HLG3E400L
10779.00
HLG3E600L
10779.00
TRIP UNIT ONLY
LLG3D400L
LLG3D600L
11674.00
11674.00
CLT3D400
CLT3D600
3950.00
3950.00
LLG3E400L
LLG3E600L
13603.00
13603.00
CLT3E400
CLT3E600
5879.00
5879.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for JG 400A and LG 600A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
1 Alarm Switch
1A/B햴
Bases AMBL2 & AMBL3
2 Aux. Switches
1A + 1B
Bases AMBL1
2 Aux. + 1 Alarm Switches
1A + 1B, 1A/B햴
Bases AMBL2 & AMBL3
Mounting Pocket햲
Catalog Number
List Price $
Left, Right햳
ASKL1
265.00
Left, Right, Neutral
ASKL2
265.00
Left, Right햳
ASKL3
530.00
Auxiliary/Alarm Switch Mounting Base Only
Description
Up to 3 Auxiliary Switches
2 Aux. + 1 Alarm Switch
2 Aux. + 1 Alarm Switch
Mounting Pocket
Left, Right, Neutral
Left Pocket Only
Right Pocket Only
Catalog Number
AMBL1
AMBL2
AMBL3
List Price $
61.00
61.00
61.00
Auxiliary/Alarm Switch Only
Common to DG - PG Frames
Description
1 Normally Open Contact (1A)
1 Normally Closed Contact (1B)
Catalog Number
ASWPA
ASWPB
List Price $
108.00
108.00
Shunt Trips
Mounting Pocket
Right Pocket Only
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
Catalog Number
UVRLA12DC
UVRLB24DC
UVRLC48DC
UVRLG60DC
UVRLD125DC
UVRLE250DC
UVRLN120
UVRLR240
UVRLP208
UVRLS277
UVRLT415
UVRLU480
UVRLV600
List Price $
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
594.00
MOLDED CASE
CIRCUIT BREAKERS
Catalog Number
STRLB24DC
STRLC60DC
STRLD125DC
STRLE250DC
STRLM60
STRLN120
STRLS277
STRLV600
6
Description
24 VDC
48-60 VDC
110-127 VDC
220-250 VDC
48-60 VAC
110-127 VAC
208-277 VAC
380-600 VAC
Undervoltage Release
Description
12 VDC
24 VDC
48 VDC
60 VDC
110-127 VDC
220-250 VDC
110-127 VAC
220-240 VAC
208 VAC
277 VAC
380-415 VAC
440-480 VAC
600 VAC
Mounting Pocket
Right Pocket Only
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory
combinations.
햳 Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.
Discount Schedule MCCB
External Accessories pages 6-125 through 6-139
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-111
VL Circuit Breakers
MG 800A Frame, VL Series
Selection/Dimensions
Ordering Information
Complete Assembled Breaker
Prices for a complete factory assembled MG breaker include the frame, trip
unit, and standard line and load lugs, all factory installed and shipped as a
complete breaker. Assembled breakers are available only with standard
connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only. For
non-interchangeable trip breakers, change the third digit of the catalog number
to “X” for standard breakers.
100% Rated: For 100% rated breakers (or frames) with an interchangeable trip
unit, change the 3rd character of the catalog name to ”H”.
For 100% rated breakers with a non-interchangeable trip unit, change the 3rd
character of the catalog number to ”Y“.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
A Toggle Handle Extension is included with each frame or complete breaker.
MOLDED CASE
CIRCUIT BREAKERS
6
Interrupting Ratings
Breaker
Type
NMG
HMG
LMG
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
25
22
35
65
65
50
50
100
65
35
25
50
100
75
70
70
200
100
50
42
65
200
150
100
75
Number
of Poles
2, 3
4
Width
Length
Depth
To Handle
D1
7.5 (190)
16 (406) 4.5 (114) 5.9 (151)
10 (253)
Shipping Weight, lbs. (kg)
690
ICU
20
30
35
ICS
10
15
17
Connectors for 75°C Wire
Ampere
Construction Rating
Aluminum햴
200-800A
Aluminum
200-800A
Copper
200-800A
Aluminum
200-800A
Compression Lug Kit햲
200-800A
Dimensions, inches (mm)
Wire
Range
1/0–500 kcmil Al/Cu
500-750 kcmil Al/Cu
1/0–500 kcmil Cu
#2–600 kcmil Al/Cu
No. of cables
per connector
3
2
3
3
Catalog
Number
3TA3MG500햳
3TA2MG750햳
TC3MG500햶햷
3TA3MG600햳햵
List
Price $
202.00
364.00
134.00
218.00
1/0–500 kcmil Cu
–
9CLM500햲
1056.00
Poles
Frame
2, 3
4
31.3 (14.2)
40.2 (18.2)
Trip Unit
Complete
Breaker
4.0 (1.8)
5.0 (2.3)
35.3 (16.0)
45.2 (20.5)
EnclosuresA
NEMA Class
Catalog Number
List
Price $
1
3R
Neutral
MG0801S
MG0803R
(future)
CSO
CSO
—
햲
Total of 9 connectors (3 per phase Line or Load).
햳 Kit consists of 3 terminal connectors.
햴 Standard connector supplied with complete breakers.
햵 Includes extended terminal cover.
햶 Consists of one terminal.
햷 For 100% rated applications.
MG Thermal-Magnetic,
Instantaneous
Trip Adjustment Range
Trip Unit Continuous
Amp Rating (In)
600
700
800
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
3000
3250
3250
6000
6500
6500
Note: Each breaker has 6 trip settings.
A - Consult with Siemens for availability.
6-112
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
MG 800A Thermal-Magnetic Trip Unit
Selection
AMPS
Ii
I n = 800A
4550
5200
3900
5850
3250
6500
40 C
TM ~
Trip Unit/Disparador 525
Model 525 Trip Unit
MG 800A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
600
700
800
Catalog
Number
List
Price $
NMG2F800
3502.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HMG2F800
5208.00
L-Interrupting Class
Catalog
Number
LMG2F800
List
Price $
6456.00
6456.00
6456.00
HMG2B600L
HMG2B700L
HMG2B800L
8162.00
8162.00
8162.00
LMG2B600L
LMG2B700L
LMG2B800L
List
Price $
8238.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NMG2B600L
NMG2B700L
NMG2B800L
Catalog
Number
TRIP UNIT ONLY
11192.00
11192.00
11192.00
CMT2B600
CMT2B700
CMT2B800
2686.00
2686.00
2686.00
Catalog
Number
List
Price $
MG 800A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
List
Price $
NMG3F800
4305.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HMG3F800
6033.00
L-Interrupting Class
Catalog
Number
LMG3F800
List
Price $
9039.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NMG3B600L
NMG3B700L
NMG3B800L
7868.00
7868.00
7868.00
HMG3B600L
HMG3B700L
HMG3B800L
9596.00
9596.00
9596.00
LMG3B600L
LMG3B700L
LMG3B800L
TRIP UNIT ONLY
12602.00
12602.00
12602.00
CMT3B600
CMT3B700
CMT3B800
3161.00
3161.00
3161.00
6
600
700
800
Catalog
Number
MOLDED CASE
CIRCUIT BREAKERS
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-113
VL Circuit Breakers
MG 800A Electronic 3-Knob & LCD Trip Units
Selection
Alarm
>1.05
Ir
400
680HG
Amps
t sd
2
2.5
4
7
xI r
630
.2
Sec.
6
5
2
I t
ON
2
.3
.1
I t
V1.04
.4 OFF
.5
0
3
1.5
600
700
1.5
sd
1.5
500
800
X3
I
315 350
300
300
.4
.1
.3
.2
Active
Model 545 Trip Units
MG 800A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NMG3F800
4305.00
FRAME ONLY
HMG3F800
6033.00
L-Interrupting Class
Catalog
Number
List
Price $
LMG3F800
9039.00
Catalog
Number
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
600
800
NMG3N600L
NMG3N800L
8672.00
8672.00
600
800
NMG3P600L
NMG3P800L
9006.00
9006.00
600
800
NMG3U600L
NMG3U800L
10935.00
10935.00
600
800
NMG3X600L
NMG3X800L
10602.00
10602.00
ELECTRONIC LI TRIP
HMG3N600L
10400.00
HMG3N800L
10400.00
ELECTRONIC LSI TRIP
HMG3P600L
10734.00
HMG3P800L
10734.00
ELECTRONIC LSIG TRIP
HMG3U600L
12663.00
HMG3U800L
12663.00
ELECTRONIC LIG TRIP
HMG3X600L
12330.00
HMG3X800L
12330.00
List
Price $
TRIP UNIT ONLY
LMG3N600L
LMG3N800L
13406.00
13406.00
CMT3N600
CMT3N800
3965.00
3965.00
LMG3P600L
LMG3P800L
13740.00
13740.00
CMT3P600
CMT3P800
4299.00
4299.00
LMG3U600L
LMG3U800L
15669.00
15669.00
CMT3U600
CMT3U800
6228.00
6228.00
LMG3X600L
LMG3X800L
15336.00
15336.00
CMT3X600
CMT3X800
5895.00
5895.00
Catalog
Number
List
Price $
MG 800A Frame 4-Pole Electronic Trip UnitA
Continuous
Ampere Rating
MOLDED CASE
CIRCUIT BREAKERS
6
N-Interrupting Class
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NMG4F800
5597.00
FRAME ONLY
HMG4F800
7844.00
L-Interrupting Class
Catalog
Number
List
Price $
LMG4F800
11753.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
600
800
NMG4N600L
NMG4N800L
11289.00
11289.00
600
800
NMG4P600L
NMG4P800L
11722.00
11722.00
600
800
NMG4U600L
NMG4U800L
14230.00
14230.00
600
800
NMG4X600L
NMG4X800L
13796.00
13796.00
ELECTRONIC LI TRIP
HMG4N600L
13536.00
HMG4N800L
13536.00
ELECTRONIC LSI TRIP
HMG4P600L
13969.00
HMG4P800L
13969.00
ELECTRONIC LSIG TRIP
HMG4U600L
16477.00
HMG4U800L
16477.00
ELECTRONIC LIG TRIP
HMG4X600L
16043.00
HMG4X800L
16043.00
TRIP UNIT ONLY
LMG4N600L
LMG4N800L
17445.00
17445.00
CMT4N600
CMT4N800
5156.00
5156.00
LMG4P600L
LMG4P800L
17878.00
17878.00
CMT4P600
CMT4P800
5589.00
5589.00
LMG4U600L
LMG4U800L
20386.00
20386.00
CMT4U600
CMT4U800
8097.00
8097.00
LMG4X600L
LMG4X800L
19952.00
19952.00
CMT4X600
CMT4X800
7663.00
7663.00
A= 605 B= 612
C= 615 N= 0
X3
680JM
Model 576 Trip Unit
MG 800A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NMG3F800
4305.00
FRAME ONLY
HMG3F800
6033.00
L-Interrupting Class
Catalog
Number
List
Price $
LMG3F800
9039.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
600
800
NMG3D600L
NMG3D800L
9650.00
9650.00
600
800
NMG3E600L
NMG3E800L
11581.00
11581.00
LCD ELECTRONIC LSI TRIP
HMG3D600L
11378.00
HMG3D800L
11378.00
LCD ELECTRONIC LSIG TRIP
HMG3E600L
13309.00
HMG3E800L
13309.00
Catalog
Number
List
Price $
TRIP UNIT ONLY
LMG3D600L
LMG3D800L
14384.00
14384.00
CMT3D600
CMT3D800
4943.00
4943.00
LMG3E600L
LMG3E800L
16315.00
16315.00
CMT3E600
CMT3E800
6874.00
6874.00
A - Consult with Siemens for availability.
6-114
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for MG 800A, NG 1200A and PG 1600A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
2 Aux. + 2 Alarm Switches
2A + 2B
Bases AMBP2
4 Aux. Switches
2A + 2B
Bases AMBP1
Mounting Pocket햲
Catalog Number
List Price $
Left Pocket Only
ASKP3
530.00
Left, Right, Neutral
ASKP4
495.00
x4
Auxiliary/Alarm Switch Mounting Base Only
Description
Up to 4 Auxiliary Switches
2 Aux. + 2 Alarm Switches
Mounting Pocket
Left, Right, Neutral
Left Pocket Only
Catalog Number
AMBP1
AMBP2
List Price $
83.00
83.00
Auxiliary/Alarm Switch Only
Common to DG - PG Frames
Description
1 Normally Open Contact (1A)
1 Normally Closed Contact (1B)
Catalog Number
ASWPA
ASWPB
List Price $
108.00
108.00
x4
Shunt Trips
Mounting Pocket
Right Pocket Only
List Price $
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
Catalog Number
UVRPA12DC
UVRPB24DC
UVRPC48DC
UVRPG60DC
UVRPD125DC
UVRPE250DC
UVRPN120
UVRPR240
UVRPP208
UVRPS277
UVRPT415
UVRPU480
UVRPV600
List Price $
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
654.00
MOLDED CASE
CIRCUIT BREAKERS
Catalog Number
STRPB24DC
STRPC60DC
STRPD125DC
STRPE250DC
STRPM60
STRPN120
STRPS277
STRPV600
6
Description
24 VDC
48-60 VDC
110-127 VDC
220-250 VDC
48-60 VAC
110-127 VAC
208-277 VAC
380-600 VAC
Undervoltage Release
Description
12 VDC
24 VDC
48 VDC
60 VDC
110-127 VDC
220-250 VDC
110-127 VAC
220-240 VAC
208 VAC
277 VAC
380-415 VAC
440-480 VAC
600 VAC
Mounting Pocket
Right Pocket Only
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory
combinations.
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-115
VL Circuit Breakers
NG 1200A Frame, VL Series
Selection/Dimensions
Ordering Information
Complete Assembled Breaker with Lugs
Prices for a complete factory assembled NG breaker include the frame, trip unit,
and standard line and load lugs, all factory installed and shipped as a complete
breaker. Assembled breakers are available only with standard connectors.
For any other configuration, order the frame, trip unit, and terminals as
separate items.
For DC applications, use thermal magnetic trip unit only.
For reverse feed applications, select non-interchangeable trip breakers only. For
non-interchangeable trip breakers, change the third digit of the catalog number
to “X” for standard breakers.
100% Rated: For 100% rated breakers (or frames) with an interchangeable trip
unit, change the 3rd character of the catalog name to ”H”.
For 100% rated breakers with a non-interchangeable trip unit, change the 3rd
character of the catalog number to ”Y“.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
A Toggle Handle Extension is included with each frame or complete breaker.
6
MOLDED CASE
CIRCUIT BREAKERS
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
25
22
35
65
35
50
25
100
65
35
25
50
100
50
70
35
200
100
65
42
65
200
100
100
50
W
L
D
To Handle
D1
9 (229)
12 (305) 16 (406) 6 (152) 8.1 (207)
Shipping Weight, lbs. (kg)
690
ICU
20
30
35
ICS
10
15
17
Connectors for 75°C Wire
Ampere
Construction Rating
Aluminum
300-1200A
Aluminum
300-1200A
Copper
300-1200A
Aluminum
300-1200A
Compression Lug Kit햲
300-1200A
Number
of Poles
2, 3
4
Interrupting Ratings
Breaker
Type
NNG
HNG
LNG
Dimensions, inches (mm)
Wire
Range
1/0–500 kcmil Al/Cu
500-750 kcmil Al/Cu
1/0–500 kcmil Cu햳
1/0–500 kcmil Al/Cu
No. of cables
per connector
4
3
4
4
Catalog
Number
3TA4NG500햴햵
3TA3NG750햵
3TC4NG500햵
3TA4NG500H햵
List
Price $
291.00
832.00
832.00
875.00
1/0–500 kcmil Al/Cu
–
12CLN500
1393.00
Poles
Frame
2, 3
4
46.3 (21.0)
60.6 (27.5)
Trip Unit
Complete
Breaker
8.8 (4.0)
13.2 (6.0)
55.1 (25.0)
73.8 (33.5)
EnclosuresA
Type
Catalog
Number
List
Price $
1
NG1201S
CSO
3R
NG1203R
CSO
12
NG12012
CSO
Neutral
(future)
—
햲
Total of 12 connectors (4 per phase Line or Load).
햳 90 °C for 100% rated breakers.
햴 Standard connector provided with complete breakers.
햵 Kit consists of 3 terminal connectors.
NG Thermal-Magnetic,
Instantaneous
Trip Adjustment Range
Trip Unit Continuous
Amp Rating (In)
800
900
1000
1200
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
4000
5000
5000
7000
8000
10000
10000
12000
Note: Each breaker has 6 trip settings.
A - Consult with Siemens for availability.
6-116
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
NG 1200A Thermal-Magnetic Trip Unit
Selection
I n = 1200A
Ii
AMPS
9000
8000
9000
TM ~
11000
7000
Ii
12000
Ii
AMPS
40 C
10000
11000
7000
Trip Unit/Disparador 525
AMPS
9000
10000
8000
12000
10000
8000
11000
7000
12000
Amps
Amps
Model 525 Trip Unit
NG 1200A Frame 2-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
800
900
1000
1200
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NNG2F120
5135.00
FRAME ONLY
HNG2F120
6853.00
L-Interrupting Class
Catalog
Number
LNG2F120
List
Price $
10945.00
10945.00
10945.00
10945.00
HNG2B800L
HNG2B900L
HNG2B100L
HNG2B120L
12663.00
12663.00
12663.00
12663.00
LNG2B800L
LNG2B900L
LNG2B100L
LNG2B120L
List
Price $
10000.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NNG2B800L
NNG2B900L
NNG2B100L
NNG2B120L
Catalog
Number
TRIP UNIT ONLY
15810.00
15810.00
15810.00
15810.00
CNT2B800
CNT2B900
CNT2B100
CNT2B120
5418.00
5418.00
5418.00
5418.00
Catalog
Number
List
Price $
NG 1200A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
List
Price $
Catalog
Number
List
Price $
NNG3F120
6321.00
FRAME ONLY
HNG3F120
7937.00
L-Interrupting Class
Catalog
Number
LNG3F120
List
Price $
10960.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
Discount Schedule MCCB
13284.00
13284.00
13284.00
13284.00
HNG3B800L
HNG3B900L
HNG3B100L
HNG3B120L
14900.00
14900.00
14900.00
14900.00
LNG3B800L
LNG3B900L
LNG3B100L
LNG3B120L
TRIP UNIT ONLY
17923.00
17923.00
17923.00
17923.00
CNT3B800
CNT3B900
CNT3B100
CNT3B120
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6375.00
6375.00
6375.00
6375.00
6-117
MOLDED CASE
CIRCUIT BREAKERS
NNG3B800L
NNG3B900L
NNG3B100L
NNG3B120L
6
800
900
1000
1200
H-Interrupting Class
Catalog
Number
VL Circuit Breakers
NG 1200A Electronic 3-Knob & LCD Trip Units
Selection
In =
1200 A ~
Alarm
>1.05
Ir
630
700
800
1200
Amps
tr
500 600
400
400
X3
Trip Unit/Disparador
1000
900
6
8
25
20
4
240 360
480
180
14
600
150
1200
17
30
V2.02
Ii
10
2.5
Sec.
Amps x10
720
1200
960
Active
545
2
4
6
Model 545 Trip Units
Model 576 Trip Unit
NG 1200A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NNG3F120
6321.00
FRAME ONLY
HNG3F120
7937.00
L-Interrupting Class
Catalog
Number
LNG3F120
List
Price $
800
1000
1200
NNG3N800L
NNG3N100L
NNG3N120L
14651.00
14651.00
14651.00
800
1000
1200
NNG3P800L
NNG3P100L
NNG3P120L
14985.00
14985.00
14985.00
800
1000
1200
NNG3U800L
NNG3U100L
NNG3U120L
16914.00
16914.00
16914.00
800
1000
1200
NNG3X800L
NNG3X100L
NNG3X120L
16581.00
16581.00
16581.00
List
Price $
10960.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
ELECTRONIC LI TRIP
HNG3N800L
16267.00
HNG3N100L
16267.00
HNG3N120L
16267.00
ELECTRONIC LSI TRIP
HNG3P800L
16601.00
HNG3P100L
16601.00
HNG3P120L
16601.00
ELECTRONIC LSIG TRIP
HNG3U800L
18530.00
HNG3U100L
18530.00
HNG3U120L
18530.00
ELECTRONIC LIG TRIP
HNG3X800L
18197.00
HNG3X100L
18197.00
HNG3X120L
18197.00
Catalog
Number
TRIP UNIT ONLY
LNG3N800L
LNG3N100L
LNG3N120L
19290.00
19290.00
19290.00
CNT3N800
CNT3N100
CNT3N120
7742.00
7742.00
7742.00
LNG3P800L
LNG3P100L
LNG3P120L
19624.00
19624.00
19624.00
CNT3P800
CNT3P100
CNT3P120
8076.00
8076.00
8076.00
LNG3U800L
LNG3U100L
LNG3U120L
21553.00
21553.00
21553.00
CNT3U800
CNT3U100
CNT3U120
10005.00
10005.00
10005.00
LNG3X800L
LNG3X100L
LNG3X120L
21220.00
21220.00
21220.00
CNT3X800
CNT3X100
CNT3X120
9672.00
9672.00
9672.00
Catalog
Number
List
Price $
NG 1200A Frame 4-Pole Electronic Trip UnitA
MOLDED CASE
CIRCUIT BREAKERS
6
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NNG4F120
8218.00
FRAME ONLY
HNG4F120
10319.00
L-Interrupting Class
Catalog
Number
LNG4F120
List
Price $
14249.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
800
1000
1200
NNG4N800L
NNG4N100L
NNG4N120L
19066.00
19066.00
19066.00
800
1000
1200
NNG4P800L
NNG4P100L
NNG4P120L
19501.00
19501.00
19501.00
800
1000
1200
NNG4U800L
NNG4U100L
NNG4U120L
22009.00
22009.00
22009.00
800
1000
1200
NNG4X800L
NNG4X100L
NNG4X120L
21576.00
21576.00
21576.00
ELECTRONIC LI TRIP
HNG4N800L
21167.00
HNG4N100L
21167.00
HNG4N120L
21167.00
ELECTRONIC LSI TRIP
HNG4P800L
21602.00
HNG4P100L
21602.00
HNG4P120L
21602.00
ELECTRONIC LSIG TRIP
HNG4U800L
24110.00
HNG4U100L
24110.00
HNG4U120L
24110.00
ELECTRONIC LIG TRIP
HNG4X800L
23677.00
HNG4X100L
23677.00
HNG4X120L
23677.00
TRIP UNIT ONLY
LNG4N800L
LNG4N100L
LNG4N120L
25097.00
25097.00
25097.00
CNT4N800
CNT4N100
CNT4N120
10064.00
10064.00
10064.00
LNG4P800L
LNG4P100L
LNG4P120L
25532.00
25532.00
25532.00
CNT4P800
CNT4P100
CNT4P120
10499.00
10499.00
10499.00
LNG4U800L
LNG4U100L
LNG4U120L
28040.00
28040.00
28040.00
CNT4U800
CNT4U100
CNT4U120
13007.00
13007.00
13007.00
LNG4X800L
LNG4X100L
LNG4X120L
27607.00
27607.00
27607.00
CNT4X800
CNT4X100
CNT4X120
12574.00
12574.00
12574.00
NG 1200A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NNG3F120
6321.00
FRAME ONLY
HNG3F120
7937.00
L-Interrupting Class
Catalog
Number
LNG3F120
List
Price $
800
1000
1200
NNG3D800L
NNG3D100L
NNG3D120L
16196.00
16196.00
16196.00
800
1000
1200
NNG3E800L
NNG3E100L
NNG3E120L
18125.00
18125.00
18125.00
List
Price $
10960.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
LCD ELECTRONIC LSI TRIP
HNG3D800L
17812.00
HNG3D100L
17812.00
HNG3D120L
17812.00
LCD ELECTRONIC LSIG 4-W TRIP
HNG3E800L
19741.00
HNG3E100L
19741.00
HNG3E120L
19741.00
Catalog
Number
TRIP UNIT ONLY
LNG3D800L
LNG3D100L
LNG3D120L
20835.00
20835.00
20835.00
CNT3D800
CNT3D100
CNT3D120
9287.00
9287.00
9287.00
LNG3E800L
LNG3E100L
LNG3E120L
22764.00
22764.00
22764.00
CNT3E800
CNT3E100
CNT3E120
11216.00
11216.00
11216.00
A - Consult with Siemens for availability.
6-118
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
VL Circuit Breakers
Internal Accessories for MG 800A, NG 1200A, and PG 1600A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
Mounting Pocket햲
Catalog Number
List Price $
Left Pocket Only
ASKP3
530.00
Left, Right, Neutral
ASKP4
495.00
2 Aux. + 2 Alarm Switches
2A + 2B
Base AMBP2
4 Aux. Switches
2A + 2B
Base AMBP1
x4
Auxiliary/Alarm Switch Mounting Base Only
Description
Mounting Pocket햲
Catalog Number
List Price $
Up to 4 Auxiliary Switches
2 Aux. + 2 Alarm Switches
Left, Right, Neutral
Left Pocket Only
AMBP1
AMBP2
83.00
83.00
Auxiliary/Alarm Switch Only
Common to DG-PG Frames
Description
Catalog Number
List Price $
1 Normally Open Contact (1A)
ASWPA
108.00
1 Normally Closed Contact (1B)
ASWPB
108.00
x4
Shunt Trips
Description
Mounting Pocket
654.00
48-60 VDC
STRPC60DC
654.00
STRPD125DC
654.00
STRPE250DC
654.00
48-60 VAC
STRPM60
654.00
110-127 VAC
STRPN120
654.00
208-277 VAC
STRPS277
654.00
380-600 VAC
STRPV600
654.00
Catalog Number
List Price $
110-127 VDC
220-250 VDC
Right Pocket Only
MOLDED CASE
CIRCUIT BREAKERS
List Price $
STRPB24DC
6
Catalog Number
24 VDC
Undervoltage Release
Description
Mounting Pocket
12 VDC
UVRPA12DC
654.00
24 VDC
UVRPB24DC
654.00
48 VDC
UVRPC48DC
654.00
60 VDC
UVRPG60DC
654.00
110-127 VDC
UVRPD125DC
654.00
UVRPE250DC
654.00
220-250 VDC
110-127 VAC
Right Pocket Only
220-240 VAC
UVRPN120
654.00
UVRPR240
654.00
208 VAC
UVRPP208
654.00
277 VAC
UVRPS277
654.00
380-415 VAC
UVRPT415
654.00
440-480 VAC
UVRPU480
654.00
600 VAC
UVRPV600
654.00
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory combinations.
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-119
VL Circuit Breakers
PG 1600A Frame, VL Series & Thermal-Magnetic Trip Unit
Selection/Dimensions
Ordering Information
Prices for a complete factory assembled PG breaker include the frame and trip
unit only. The connectors must be ordered as separate items.
For any other configuration, order the frame, trip unit, and connectors as
separate items.
Connectors require a Breaker Lug Mounting Assembly or Breaker Mounting
Base and must be ordered as a seperate item.
For DC applications, use Thermal magnetic trip unit only.
For reverse feed applications select non-interchangeable trip breakers only.
Change the third digit of the catalog number to “X” for non-interchangeable trip
breakers.
100% Rated: For 100% rated breakers (or frames) with an interchangeable trip
unit, change the 3rd character of the catalog name to ”H”.
For 100% rated breakers with a non-interchangeable trip unit, change the 3rd
character of the catalog number to ”Y“.
For 50˚C and special applications, refer to page 6-144.A
Mounting hardware is included with each frame or complete breaker.
A Toggle Handle Extension is included with each frame or complete breaker.
6
MOLDED CASE
CIRCUIT BREAKERS
RMS Symmetrical Amperes (KA)
UL 489
IEC 60947-2
Volts AC (50/60 Hz)
Volts DC
Volts AC (50/60 Hz)
220/240
380/415
240
480
600
250
500
ICU
ICS
ICU
ICS
65
35
25
22
35
65
35
50
25
100
65
35
25
50
100
50
70
35
200
100
65
42
65
200
100
100
50
Ampere
Rating
1200-1600A
1200-1600A
1200-1600A
1200-1600A
1200-1600A
1200-1600A
Wire
Range
1/0–750 kcmil Al/Cu
1/0–750 kcmil Cu
300–600 kcmil
600–750 kcmil
300–600 kcmil
300–600 kcmil
No. of cables
per phase
6
6
5
4
6
5
W
L
D
To Handle
D1
9 (229)
12 (305) 16 (406) 6 (152) 8.1 (207)
Shipping Weight, lbs. (kg)
690
ICU
20
30
35
ICS
10
15
17
Connectors for 75°C Wire
Construction
Aluminum
Copper
Aluminum
Aluminum
Aluminum
Copper
Number
of Poles
2, 3
4
Interrupting Ratings
Breaker
Type
NPG
HPG
LPG
Dimensions, inches (mm)
Catalog
List
Number
Price $
3TA6PG750햲햴햷
940.00
3TC6PG750 (future)햲햴 1342.00
320.00
TA5P600햳햵
254.00
TA4P750햳햵
338.00
TA6R600햳햵
426.00
TC5R600햳햵햶
햲
Requires Lug Mounting Assembly LMAP1600.
Requires Breaker Mounting Base MBPG1600 Kit or MBPG1601.
Consists of 3 connectors.
햵 Consists of 1 connector.
햶 For 100% rated applications, 90°C.
햷 Standard connector provided with complete breaker.
Poles
Frame
Trip Unit
Complete
Breaker
2, 3
4
60.2 (27.3)
76.7 (34.8)
8.8 (4.0)
13.2 (6.0)
69.0 (31.3)
89.9 (40.8)
PG Thermal-Magnetic,
Instantaneous
Trip Adjustment Range
Trip Unit Continuous
Amp Rating (In)
1200
1400
1600
Instantaneous
Overcurrent Setting (Ii)
Min.
Max.
7000
7000
7000
12000
12000
12000
Note: Each breaker has 6 trip settings in this range.
햳
햴
Mounting Arrangement
Description
Lug Mounting Assembly
Breaker Mounting Base (Front Connect)
Breaker Mounting Base (Rear Connect)
Catalog Number
LMAP1600
MBPG1600
MBPG1601
List Price $
968.00
1153.00
1153.00
Model 525 Trip Unit
PG 1600A Frame 3-Pole with Thermal-Magnetic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
1200
1400
1600
Catalog
Number
List
Price $
NPG3F160
8983.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HPG3F160
9944.00
L-Interrupting Class
Catalog
Number
LPG3F160
NPG3B120
NPG3B140
NPG3B160
17276.00
17276.00
17276.00
HPG3B120
HPG3B140
HPG3B160
18237.00
18237.00
18237.00
LPG3B120
LPG3B140
LPG3B160
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog
Number
List
Price $
12158.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
A - Consult with Siemens for availability.
6-120
List
Price $
TRIP UNIT ONLY
20451.00
20451.00
20451.00
CPT3B120
CPT3B140
CPT3B160
8293.00
8293.00
8293.00
External Accessories pages 6-125 through 6-139
Discount Schedule MCCB
VL Circuit Breakers
PG 1600A Electronic 3-Knob & LCD Trip Units
Selection
Model 545 Trip Unit
PG 1600A Frame 3-Pole Electronic Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NPG3F160
8983.00
FRAME ONLY
HPG3F160
9944.00
L-Interrupting Class
Catalog
Number
LPG3F160
List
Price $
Catalog
Number
12158.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
1200
1600
NPG3N120
NPG3N160
18743.00
18743.00
1200
1600
NPG3P120
NPG3P160
19077.00
19077.00
1200
1600
NPG3U120
NPG3U160
21006.00
21006.00
1200
1600
NPG3X120
NPG3X160
20672.00
20672.00
ELECTRONIC LI TRIP
HPG3N120
19704.00
HPG3N160
19704.00
ELECTRONIC LSI TRIP
HPG3P120
20038.00
HPG3P160
20038.00
ELECTRONIC LSIG TRIP
HPG3U120
21967.00
HPG3U160
21967.00
ELECTRONIC LIG TRIP
HPG3X120
21633.00
HPG3X160
21633.00
List
Price $
TRIP UNIT ONLY
LPG3N120
LPG3N160
21918.00
21918.00
CPT3N120
CPT3N160
9760.00
9760.00
LPG3P120
LPG3P160
22252.00
22252.00
CPT3P120
CPT3P160
10094.00
10094.00
LPG3U120
LPG3U160
24181.00
24181.00
CPT3U120
CPT3U160
12023.00
12023.00
LPG3X120
LPG3X160
23847.00
23847.00
CPT3X120
CPT3X160
11689.00
11689.00
PG 1600A Frame 4-Pole Electronic Trip UnitA
N-Interrupting Class
Catalog
Number
NPG4F160
11678.00
H-Interrupting Class
Catalog
Number
List
Price $
FRAME ONLY
HPG4F160
12927.00
L-Interrupting Class
Catalog
Number
LPG4F160
List
Price $
Catalog
Number
15806.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
NPG4N120
NPG4N160
24367.00
24367.00
1200
1600
NPG4P120
NPG4P160
24800.00
24800.00
1200
1600
NPG4U120
NPG4U160
27308.00
27308.00
1200
1600
NPG4X120
NPG4X160
26874.00
26874.00
TRIP UNIT ONLY
LPG4N120
LPG4N160
28495.00
28495.00
CPT4N120
CPT4N160
12689.00
12689.00
LPG4P120
LPG4P160
28928.00
28928.00
CPT4P120
CPT4P160
13122.00
13122.00
LPG4U120
LPG4U160
31436.00
31436.00
CPT4U120
CPT4U160
15630.00
15630.00
LPG4X120
LPG4X160
31002.00
31002.00
CPT4X120
CPT4X160
15196.00
15196.00
Model 576 Trip Unit
PG 1600A Frame 3-Pole Electronic LCD Trip Unit
N-Interrupting Class
Continuous
Ampere Rating
H-Interrupting Class
Catalog
Number
List
Price $
Catalog
Number
List
Price $
NPG3F160
8983.00
FRAME ONLY
HPG3F160
9944.00
L-Interrupting Class
Catalog
Number
LPG3F160
List
Price $
1200
1600
NPG3D120
NPG3D160
20591.00
20591.00
1200
1600
NPG3E120
NPG3E160
22520.00
22520.00
List
Price $
12158.00
COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER
LCD ELECTRONIC LSI TRIP
HPG3D120
21552.00
HPG3D160
21552.00
LCD ELECTRONIC LSIG TRIP
HPG3E120
23481.00
HPG3E160
23481.00
Catalog
Number
TRIP UNIT ONLY
LPG3D120
LPG3D160
23766.00
23766.00
CPT3D120
CPT3D160
11608.00
11608.00
LPG3E120
LPG3E160
25695.00
25695.00
CPT3E120
CPT3E160
13537.00
13537.00
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-121
MOLDED CASE
CIRCUIT BREAKERS
1200
1600
ELECTRONIC LI TRIP
HPG4N120
25616.00
HPG4N160
25616.00
ELECTRONIC LSI TRIP
HPG4P120
26049.00
HPG4P160
26049.00
ELECTRONIC LSIG TRIP
HPG4U120
28557.00
HPG4U160
28557.00
ELECTRONIC LIG TRIP
HPG4X120
28123.00
HPG4X160
28123.00
List
Price $
6
Continuous
Ampere Rating
List
Price $
VL Circuit Breakers
Internal Accessories for MG 800A, NG 1200A, and PG 1600A Frames
Selection
Auxiliary Switch and Alarm Switch Combination Kits
Description
Mounting Pocket햲
Catalog Number
List Price $
Left Pocket Only
ASKP3
530.00
Left, Right, Neutral
ASKP4
495.00
2 Aux. + 2 Alarm Switches
2A + 2B
Base AMBP2
4 Aux. Switches
2A + 2B
Base AMBP1
x4
Auxiliary/Alarm Switch Mounting Base Only
Description
Mounting Pocket햲
Catalog Number
Up to 4 Auxiliary Switches
2 Aux. + 2 Alarm Switches
Left, Right, Neutral
Left Pocket Only
AMBP1
AMBP2
List Price $
83.00
83.00
Auxiliary/Alarm Switch Only
Common to DG-PG Frames
Description
Catalog Number
List Price $
1 Normally Open Contact (1A)
ASWPA
108.00
1 Normally Closed Contact (1B)
ASWPB
108.00
x4
Shunt Trips
Description
Catalog Number
List Price $
24 VDC
Mounting Pocket
STRPB24DC
654.00
48-60 VDC
STRPC60DC
654.00
STRPD125DC
654.00
STRPE250DC
654.00
48-60 VAC
STRPM60
654.00
110-127 VAC
STRPN120
654.00
208-277 VAC
STRPS277
654.00
380-600 VAC
STRPV600
654.00
Catalog Number
List Price $
110-127 VDC
MOLDED CASE
CIRCUIT BREAKERS
6
220-250 VDC
Right Pocket Only
Undervoltage Release
Description
Mounting Pocket
12 VDC
UVRPA12DC
654.00
24 VDC
UVRPB24DC
654.00
48 VDC
UVRPC48DC
654.00
60 VDC
UVRPG60DC
654.00
110-127 VDC
UVRPD125DC
654.00
UVRPE250DC
654.00
220-250 VDC
110-127 VAC
220-240 VAC
Right Pocket Only
UVRPN120
654.00
UVRPR240
654.00
208 VAC
UVRPP208
654.00
277 VAC
UVRPS277
654.00
380-415 VAC
UVRPT415
654.00
440-480 VAC
UVRPU480
654.00
600 VAC
UVRPV600
654.00
‘A’ refers to a normally open contact (open when the breaker contacts are open).
‘B’ refers to a normally closed contact (closed when the breaker contacts are open).
햲 Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory combinations.
External Accessories pages 6-125 through 6-139
6-122
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Molded Case Circuit Breakers
Molded Case Switch
Selection
General
Typically a molded case switch is used
when a compact load-break switch is
needed for disconnect purposes. The
VL line of molded case switches from
Siemens is made of the same materials and components as the VL circuit
breakers but do not provide overcurrent protection. Each molded case
the molded case switch. Also, the
short-circuit current rating of the
switch is limited to the interrupting rating of the upstream protective device
or the ratings in the table below,
whichever is less.
switch has a fixed instantaneous selfprotecting trip element which may
open the switch under high fault conditions.
Application Note
Overcurrent protection must be provided by an appropriate overcurrent protective device located upstream from
Ordering Information
Each type VL molded case switch accepts the same terminals and accessories as the equivalent VL circuit breakers.
All type VL molded case switches are suitable for reverse feed applications.
Mounting hardware and standard line and load terminals are included on ratings through 250A. For 400 – 1600A ratings,
order the lugs separately.
All ratings are UL listed and CSA certified.
Molded Case Switch
Maximum
Ampere
Rating / Frame
Catalog
Number
List
Price $
Catalog
Number
Short-Circuit
Current Rating*
List
Price $
480V
600V
150A / DG
250A / FG
HDS2S150L
HFS2S250L
1362.00
1618.00
HDS3S150L
HFS3S250L
1447.00
1998.00
100k
100k
65k
65k
20k
35k
2,500A
3,500A
400A / JG
600A / LG
HJS2S400
HLS2S600
2840.00
3973.00
HJS3S400
HLS3S600
3357.00
4970.00
100k
100k
65k
65k
35k
35k
4,400A
5,500A
800A / MG
1200A / NG
HMS2S800
HNS2S120
4811.00
9172.00
HMS3S800
HNS3S120
5843.00
10002.00
100k
100k
65k
65k
35k
35k
6,500A
12,000A
1600A / PG
—
—
HPS3S160
18017.00
100k
65k
35k
12,000A
Catalog
Number
List
Price $
2-Pole
3-Pole
LFS3S250L
2498.00
240V
200k
480V
100k
600V
25k
Self Protective
Instantaneous
Override
3,500A
400A / JG
600A / LG
LJS3S400
LLS3S600
4028.00
6863.00
200k
200k
100k
100k
42k
42k
4,400A
5,500A
800A / MG
1200A / NG
LMS3S800
LNS3S120
7597.00
12003.00
200k
200k
100k
100k
50k
65k
6,500A
12,000A
1600A / PG
LPS3S160
20179.00
200k
100k
65k
12,000A
3-Pole
MOLDED CASE
CIRCUIT BREAKERS
Short-Circuit
Current Rating*
Maximum
Ampere
Rating / Frame
250A /FG
6
240V
Self Protective
Instantaneous
Override
* The Short-Circuit Current Rating is the maximum available current of the circuit where the switch is used, when protected by an appropriate overcurrent protective device.
Above 250A, terminals are not included and must be ordered separately. For terminal information and the variety of lugs available for VL breakers.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-123
Molded Case Circuit Breakers
Motor Circuit Protectors
Selection
General
Protection of Motor Circuits
Molded case circuit breakers are used in motor circuits as a disconnecting means and for short-circuit protection. They should be
used in conjunction with motor-running, over-current protection devices, and should permit the motor to start without nuisance tripping from motor-inrush current. The circuit breaker should have a continuous current rating of not less than 115% of the motor fullload current.
The recommended motor circuit protectors listed have continuous-current ratings of at least 115% of motor full-load currents. The
trip setting positions are approximately 11 times motor full-load current. The suggested trip settings may need to be adjusted
upward to no higher than 1300% of full-load current for non-design E type motors, and no greater than 1700% of full-load current
for design E motors, to allow for motor startup due to in-rush current.
Breaker Mounted Immediately Ahead of Motor Starter
Siemens motor circuit protectors are recommended for use in combination motor starters to provide selective short-circuit protection for the motor branch circuit. The adjustable instantaneous trip feature of the Siemens motor circuit protector provides for a trip
setting slightly above the peak motor in-rush current. With this setting, no delay is introduced in opening the circuit when a fault
occurs. This circuit breaker has no time-delay trip element. Therefore it must be used in conjunction with, and immediately ahead
of, the motor-running overcurrent protection device.
Important: The information below does not apply to all motor applications: it is recommended that the user refer to the National
Electrical Code (NEC) for specific needs.
Table 1 (When Breaker is Mounted Immediately Ahead of Motor Starter)
3-Phase Induction Type Motors (Siemens motor circuit protectors for branch circuit use with alternating-current combination, full voltage motor starters)
MOLDED CASE
CIRCUIT BREAKERS
6
Motor Full
Load Amperes
35-50
42-60
48-70
55-80
62-90
69-100
햲
Trip
Setting (A)
450
540
630
720
810
900
58-83
69-100
81-117
92-133
104-150
115-150햳
750
900
1050
1200
1350
1500
96-139
115-150햳
135-150햳
135-150햳
135-150햳
135-150햳
1250
1500
1750
2000
2250
2500
46-67
55-80
65-93
74-107
83-120
92-133
600
720
840
960
1080
1200
77-111
92-133
108-156
123-178
138-200
154-222
1000
1200
1400
1600
1800
2000
135-194
162-210
188-220
215-241
242-250햳
242-250햳
1750
2100
2450
2800
3150
3500
Catalog
Number 햲
HDM3L150L
HDM3M150L
HDM3H150L
HFM3L250L
HFM3M250L
HFM3H250L
List Price $
1589.00
1589.00
1589.00
2111.00
2111.00
2111.00
Motor circuit protectors rated 150A and 250A are supplied with line and load lugs
installed. If lugs are required on 400A to 1200A motor circuit breakers, order required
lugs separately.
6-124
햳
Motor Full
Load Amperes
96-139
115-167
135-194
154-222
173-250
192-278
Trip
Setting (A)
1250
1500
1750
2000
2250
2500
154-222
185-267
215-311
246-356
277-400
308-400햳
2000
2400
2800
3200
3600
4000
154-222
185-267
215-311
246-356
277-400
308-444
2000
2400
2800
3200
3600
4000
212-306
254-367
296-428
338-489
381-550
423-600
2750
3300
3850
4400
4950
5500
250-361
292-422
335-483
385-556
442-638
500-722
3250
3800
4350
5000
5740
6500
385-556
462-667
538-778
615-889
692-1000
769-1111
5000
6000
7000
8000
9000
10,000
Catalog
Number 햲
List Price $
HJM3L400
3881.00
HJM3M400
3881.00
HLM3L600
5771.00
HLM3M600
5771.00
HMM3M800
8277.00
HNM3M120
13587.00
These settings are provided for starting currents greater than 11X but not to exceed
17X. Full Load Amps ( FLA ) not to exceed ampere rating of MCP.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
External Accessories
Operating Mechanisms
Selection
6
MOLDED CASE
CIRCUIT BREAKERS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-125
External Accessories
Operating Mechanisms
Description
For DG to FG Frame
150 to 250 A
Catalog
List
Number
Price $
Through Door Mounted Rotary Handle Operator KitA
Fixed depth and the handle is mounted
directly on the circuit breaker.
Lockable knob (for up to 3 padlocks).
NEMA 1, 12
RHFF
Red Handle Version
with red knob, yellow indicator plate
NEMA 1, 12
RHFFEM
For JG to LG Frame
400 A to 600 A
Catalog
List
Number
Price $
155.00
RHFL
193.00
168.00
RHFLEM
205.00
RHVF12
214.00
RHVL12
295.00
RHSFA1
RHSFA1F
187.00
187.00
RHSLA1
RHSLA1F
187.00
187.00
RHSFA2
RHSFA2F
237.00
237.00
RHSLA2
RHSLA2F
237.00
237.00
RHVFBM
131.00
RHVLBM
212.00
RHVM12H
RHVM3RH
RHVM4XH
RHVMEMH
51.00
116.00
150.00
61.00
RHVM12H
RHVM3RH
RHVM4XH
RHVMEMH
51.00
116.00
150.00
61.00
RHVMS02
—
RHVMS12
RHVMS16
—
31.50
—
31.50
31.50
—
RHVMS02
—
RHVMS12
RHVMS16
—
31.50
—
31.50
31.50
—
Door Mounted Rotary Handle Operator KitA
Variable depth, door mounted handle.
Includes knob with masking frame,
indicator plate, detachable door coupling,
12" shaft, and breaker mounted rotary
operator. Lockable knob (for up to 3
padlocks).
NEMA 1, 12
Auxiliary Switch KitsA
For Direct or Extended Rotary
Handle Operators (RHF and RHV).
Form C, Early Break type2 Aux. Switch Kit 햲
Includes 1 switch with 5' wire
For Variable Depth
For Fixed Depth
Includes 2 switches with 5' wire
For Variable Depth
For Fixed Depth
Door Mounted Rotary Operator Mechanism OnlyA
6
Breaker mechanism only
MOLDED CASE
CIRCUIT BREAKERS
Door Mounted Rotary Handle OnlyA
Standard version NEMA 1, 12
NEMA 3R
NEMA 4X
Red Handle version
Extension Shaft Only, for Door Mounted OperatorA
2 inches (50.8mm)
3 inches (76.2mm)
12 inches (304.8 mm)
16 inches (406.4 mm)
24 inches (609.6mm) w/ support bracket
햲
During manual operation, Early Break auxiliary switch contacts open before the breaker opens.
A - Consult with Siemens for availability.
6-126
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Description
Through Door Mounted Rotary Handle Operator KitA
Fixed depth, breaker mounted.
For direct fitting to the circuit breaker.
Lockable with up to 3 padlocks.
NEMA 1, 12
Red Handle version
with red knob, yellow indicator plate
NEMA 1, 12
For MG Frame
800 A
Catalog
List
Number
Price $
For NG to PG Frame
1200 to 1600 A
Catalog
List
Number
Price $
RHFM
210.00
—
—
RHFMEM
226.00
—
—
—
—
—
Door Mounted Rotary Handle Operator KitA
Variable depth, door mounted handle.
Includes knob with masking frame,
indicator plate, detachable door coupling,
12" shaft, and breaker mounted rotary
operator. Lockable knob (for up to 3
padlocks).
NEMA 1, 12
RHVM12
322.00
—
RHSMA1
RHSMA1F
187.00
187.00
RHSPA1
RHSPA1F
187.00
187.00
RHSMA2
RHSMA2F
237.00
237.00
RHSPA2
RHSPA2F
237.00
237.00
RHVMBM
239.00
RHVPBM
239.00
RHVM12H
RHVM3RH
RHVM4XH
RHVMEMH
51.00
116.00
150.00
61.00
RHVP3RH
RHVP3RH
RHVP4XH
RHVPEMH
116.00
116.00
150.00
126.00
RHVMS02
—
RHVMS12
RHVMS16
—
31.50
—
31.50
31.50
—
—
RHVPS03
RHVPS12
—
RHVPS24
—
97.00
97.00
—
127.00
Auxiliary Switch KitsA
For Direct or Extended Rotary
Handle Operators (RHF and RHV).
Early Break type2 Aux. Switch Kit
Includes 1 switch with 5' wire
For Variable Depth
For Fixed Depth
Includes 2 switches with 5' wire
For Variable Depth
For Fixed Depth
Door Mounted Rotary Operator Mechanism OnlyA
Breaker mechanism only
6
Standard version
NEMA 1, 12
NEMA 3R
NEMA 4X
Red Handle version
MOLDED CASE
CIRCUIT BREAKERS
Door Mounted Rotary Handle OnlyA
Extension Shaft Only, for Door Mounted OperatorA
2 inches (50.8mm)
3 inches (76.2mm)
12 inches (304.8 mm)
16 inches (406.4 mm)
24 inches (609.6mm) w/ support bracket
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-127
External Accessories
Operating Mechanisms
Description
For DG and FG Frame
150 to 250 A
Catalog
List
Number
Price $
For JG and LG Frame
400 to 600 A
Catalog
List
Number
Price $
Variable Depth Flange Mounted Operator KitA
Adjustable from 8" to 16"
Complete kit, includes handle and
variable depth operator. NEMA 1, 3R, 12
NEMA 4X
IEC Black Handle
NEMA 1, 3R, 12
FHVF3R
FHVF4X
FHVF3RB
275.00
368.00
275.00
FHVL3R
FHVL4X
FHVL3RB
294.00
391.00
294.00
MFKF3R
588.00
MFKL3R
630.00
MFHM3R
MFHM3RS
MFHM4X
269.00
315.00
432.00
MFHM3R
MFHM3RS
MFHM4X
269.00
315.00
432.00
MFHM3RB
269.00
MFHM3RB
269.00
MFHM3RSB
315.00
MFHM3RSB
315.00
MFMF
194.00
MFML
218.00
Cable Only, for Max-Flex™ Variable DepthA
36"
48"
60"
72"
84"
96"
120"
144"
MFCF036
MFCF048
MFCF060
MFCF072
MFCF084
MFCF096
MFCF120
MFCF144
161.00
192.00
217.00
239.00
264.00
287.00
376.00
417.00
MFCM036
MFCM048
MFCM060
MFCM072
MFCM084
MFCM096
MFCM120
MFCM144
177.00
209.00
239.00
275.00
319.00
376.00
408.00
424.00
Handle Auxiliary SwitchA
Form C (1NO - 1NC), early break햳
1 Aux. switch
2 Aux. switch
MFSFA1
MFSFA2
165.00
330.00
MFSLA1
MFSLA2
165.00
330.00
Max-Flex™, Variable Depth Flange
Mounted Operator KitA
Complete kit, includes handle, breaker
operator, and cable.
NEMA 1, 3R, 12
For DG and FG operators, the cable is 36",
all others are 48"
Handle Only, for Max-Flex™ Variable DepthA
NEMA 1, 3R, 12
Plastic
NEMA 1, 3R, 12
Steel - epoxy coated
NEMA 4, 4X
Steel - chrome plated
Solid color (all gray) Plastic햲
NEMA 1, 3R, 12
Solid color (black handle) Steel epoxy coated햲
NEMA 1, 3R, 12
MOLDED CASE
CIRCUIT BREAKERS
6
Breaker Operator Mechanism Only, for Max-Flex™
A
햲
Max-Flex™ handles are available with solid gray or black handles instead of the customary “Red for On” flange handle.
The black handle is preferred for IEC markets, where red handles have a specific meaning.
During manual operation, Early Break aux. contacts open before the breaker opens.
A - Consult with Siemens for availability.
햳
6-128
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
Description
For MG Frame
800 A
Catalog
List
Number
Price $
For NG Frame
1200 A
Catalog
List
Number
Price $
For PG Frame
1600 A
Catalog
Number
Variable Depth Flange Mounted Operator KitA
Adjustable from 8" to 16"
Complete kit, includes handle and
variable depth operator. NEMA 1, 3R, 12
NEMA 4X
IEC Black Handle
NEMA 1, 3R, 12
—
—
—
—
—
—
—
—
—
Max-Flex™, Variable Depth Flange
Mounted Operator KitA
Complete kit, includes handle, breaker
operator, and cable.
NEMA 1, 3R, 12
For DG and FG operators, the cable is 36",
all others are 48"
—
—
—
—
—
—
List
Price $
—
—
—
MFKM3R
736.00
MFKP3RS
839.00
MFKP3RS
839.00
MFHM3R
MFHP3RS
MFHM4X
269.00
470.00
432.00
—
MFHP3RS
MFHP4X
—
470.00
630.00
—
MFHP3RS
MFHP4X
—
470.00
630.00
MFHM3RB
269.00
—
MFHM3RSB
315.00
MFHP3RSB
470.00
MFHP3RSB
470.00
MFMM
218.00
MFMP
218.00
MFMP
218.00
Cable Only, for Max-Flex™ Variable DepthA
36"
48"
60"
72"
84"
96"
120"
144"
MFCM036
MFCM048
MFCM060
MFCM072
MFCM084
MFCM096
MFCM120
MFCM144
177.00
209.00
239.00
275.00
319.00
376.00
408.00
424.00
—
MFCP048
MFCP060
MFCP072
MFCP084
MFCP096
MFCP120
MFCP144
—
237.00
275.00
320.00
337.00
401.00
437.00
588.00
—
MFCP048
MFCP060
MFCP072
MFCP084
MFCP096
MFCP120
MFCP144
—
237.00
275.00
320.00
337.00
401.00
437.00
588.00
Handle Auxiliary SwitchA
Form C (1NO - 1NC), early break햳
1 Aux. switch
2 Aux. switch
MFSPA1
MFSPA2
Handle Only, for Max-Flex™ Variable DepthA
NEMA 1, 3R, 12
Plastic
NEMA 1, 3R, 12
Steel - epoxy coated
NEMA 4, 4X
Steel - chrome plated
Solid color (all gray) Plastic햲
NEMA 1, 3R, 12
Solid color (black handle) Steel epoxy coated햲
NEMA 1, 3R, 12
Breaker Operator Mechanism Only, for Max-Flex™
A
CSO
CSO
MFSPA1
MFSPA2
—
MOLDED CASE
CIRCUIT BREAKERS
MFSPA1
MFSPA2
—
6
CSO
CSO
—
CSO
CSO
A - Consult with Siemens for availability.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-129
External Accessories
Operating Mechanisms
For DG to FG Frame
150 to 250 A
Catalog
List
Number
Price $
Description
Stored Energy and Motor Operators
Lockable with up to 3 padlocks.
AC Voltage
—
42-48
60
110–127
220–250
DC Voltage
24
42-48
60
110–127
220–250
Cylinder Locks for Field Installation
Plug-In and Draw-Out Bases
120.00
For FG Frame
250 A
Catalog
Number
PCBDRC3
351.00
PCBFRC3
691.00
PCBDFC3
351.00
PCBFFC3
691.00
DCADRC3
944.00
DCAFRC3
1194.00
DCADFC3
944.00
DCAFFC3
1194.00
Hex Wrench for racking draw-out assembly and position indicator
DCHP
134.00
DCHP
134.00
Position Indicator Switch
Form “C” switch to indicate breaker engaged/de-engaged
position.햲
DCIP
156.00
DCIP
156.00
Secondary Terminal Block Assy.
Accessory connections for plug-in or draw-out breakers. Pre-wired plug
and block with 8 terminal points.햳
PCTF83
109.00
PCTF83
109.00
90° Connection Adapter Kit
For rear connected 3-pole plug-in base
PCAF390
Plug-In Spare Breaker Kit
Set of 6 terminal blades, 2 terminal shield, & 1 trip interlock
PCXD3
242.00
PCXF3
320.00
Draw-out Spare Breaker Kit
Set of 6 terminal blades, & 1 trip interlock
DCXD3
210.00
DCXF3
289.00
Spare BreakerTrip Interlock
PCXFT
21.00
PCXFT
21.00
Plug-in Mounting Base Assembly
Includes base, terminal blade kit, sec. terminal block assembly, base trip
interlock, and mounting hardware.
Rear Connected
3-pole
Front Connected
3-pole
Draw-out Assembly
Includes base, position indicator switch, socket, base trip
interlock, crank handle, connectors, and necessary shields.
Rear Connected
3-pole
Front Connected
3-pole
(Draw-out assembly includes side plates and all hardware)
6
CLKF
For DG Frame
150 A
Catalog
List
Number
Price $
Description
MOLDED CASE
CIRCUIT BREAKERS
Stored Energy Type
SEAFB
1915.00
SEAFM
1915.00
SEAFY
1915.00
SEAFN
1915.00
SEAFR
1915.00
74.00
PCAF390
74.00
햲
Up to 2 position indicator switches may be mounted per plug-in or draw-out base.
Up to 2 plugs per breaker (16 terminal points) may be mounted on DG, and FG breakers. Up to 3 plugs per breaker (24 terminal points) may be mounted
on JG, LG, MG, NG, and PG breakers.
A - Consult Siemens for availability.
햳
6-130
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
For JG to LG Frame
400 to 600 A
Catalog
List
Number
Price $
For MG Frame
800 A
Catalog
List
Number
Price $
For NG to PG Frame
1200 to 1600 A
Catalog
List
Number
Price $
Stored Energy
SEALB
SEALM
SEALY
SEALN
SEALR
Stored Energy
SEAMB
SEAMM
SEAMY
SEAMN
SEAMR
Motor Operator
MTRPB
MTRPM
MTRPY
MTRPN
MTRPR
CLKP
Type
3525.00
3525.00
3525.00
3525.00
3525.00
120.00
CLKP
For JG Frame
400 A
Catalog
List
Number
Price $
For LG Frame
600 A
Catalog
Number
PCBJRC3
1179.00
PCBJFC3
Type
4173.00
4173.00
4173.00
4173.00
4173.00
120.00
CLKP
Type
4457.00
4457.00
4457.00
4457.00
4457.00
120.00
List
Price $
For MG Frame
800 A
Catalog
List
Number
Price $
For NG Frame
1200 A
Catalog
List
Number
Price $
For PG Frame
1600 A
Catalog
Number
PCBLRC3
1865.00
PCBMRC3
PCBNRC3
3909.00
—
—
1179.00
PCBLFC3
1865.00
—
—
—
—
DCAJRC3
1881.00
DCALRC3
2886.00
DCAMRC3
4337.00
DCAPRC3
5566.00
DCAPRC3
5566.00
DCAJFC3
1881.00
DCALFC3
2886.00
DCAMFC3
4337.00
DCAPFC3A
5566.00
DCAPFC3A
5566.00
2891.00
—
—
List
Price $
DCHP
134.00
DCHP
134.00
DCHP
134.00
DCHP
134.00
DCIP
156.00
DCIP
156.00
DCIP
156.00
DCIP
156.00
DCIP
156.00
PCTL83
133.00
PCTL83
133.00
PCTM83
143.00
PCTP83
168.00
PCTP83
168.00
—
—
—
—
—
—
—
—
—
—
—
PCXJ3
410.00
PCXL3
483.00
PCXM3
1085.00
PCXN3
1344.00
—
DCXJ3
378.00
DCXL3
452.00
DCXM3
1050.00
DCXN3
1307.00
DCXP3
1307.00
PCXLT
23.00
PCXLT
23.00
PCXMT
58.00
PCXPT
77.00
PCXPT
77.00
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-131
MOLDED CASE
CIRCUIT BREAKERS
134.00
6
DCHP
External Accessories
Connections
Description
For DG Frame
150 A
Catalog
List
Number
Price $
For FG Frame
250 A
Catalog
List
Number
Price $
FBCD3
—
FBCF3
—
Front Bus Bar Connections햲
Includes nut keeper plates and shield.
Standard 3-Pole Set
Round Terminal
6
Flat Terminal
MOLDED CASE
CIRCUIT BREAKERS
Flat Bus Bar
Standard (straight)
3-Pole Set
Bus Bar Connection Strap Kit
Includes 6 - Bus Bars, 6 Nut Keepers & Shields
100% rated applications
CSO
—
CSO
—
Rear-Connecting Studs
Short length round term. (1piece)
Long length round term. (1piece)
3-Pole round term. kit, 2 short + 1 long
Short length flat term. (1piece)
Long length flat term. (1piece)
3-Pole flat term. kit, 2 short + 1 long
Flat bus bar type (1 piece)
3-Pole set of flat bus bar
RTLDSR
RTLDLR
SRTDR3
RTLDSF
RTLDLF
SRTDF3
—
—
Terminal Shields햲
Includes 1 terminal shield, for line or load.
3-Pole Standard Shield
TSSF3
37.00
TSSF3
37.00
TSLF3
58.00
TSLF3
58.00
Interphase Barriers햲
Set of 2 barriers
Also fits plug-in and draw-out bases.
IPBF
29.00
IPBF
29.00
Lug Mounting Assy.
—
—
—
—
—
—
—
—
—
—
—
—
3-Pole Extended Shield
83.00
112.00
277.00
83.00
112.00
277.00
—
—
RTLFSR
RTLFLR
SRTFR3
RTLFSF
RTLFLF
SRTFF3
—
—
83.00
112.00
277.00
83.00
112.00
277.00
—
—
Breaker Mounting Base
Front connected
Rear connected
Terminal Shields
Interphase Barriers
햲
Not UL listed.
A - Consult Siemens for availability.
6-132
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
For JG Frame
400 A
Catalog
List
Number
Price $
For LG Frame
600 A
Catalog
List
Number
Price $
For MG Frame
800 A
Catalog
List
Number
Price $
For NG Frame
1200 A
Catalog
List
Number
Price $
For PG Frame
1600 A
Catalog
List
Number
Price $
FBCJ3A
—
FBCL3A
—
FBCM3A
—
FBCP3A
SSBP
SSBPH
CSO
1004.00
1227.00
FBCP3A
SSBP
SSBPH
—
—
—
—
—
—
RTLNSF
SRTNF3
—
—
—
—
—
—
434.00
1303.00
—
—
—
—
—
—
—
—
RTLJSR
RTLJLR
SRTJR3
RTLJSF
RTLJLF
SRTJF3
—
—
CSO
—
CSO
—
CSO
—
CSO
1004.00
1227.00
195.00
208.00
597.00
195.00
208.00
597.00
—
—
—
—
—
—
—
—
RTLLSF
SRTLF3
—
—
—
—
—
—
224.00
671.00
—
—
—
—
—
—
RTLMSF
SRTMF3
—
—
—
—
—
—
323.00
967.00
—
—
—
—
—
—
—
—
TSSL3
47.50
TSSL3
47.50
TSSM3
67.00
TSSP3
91.00
TSSP3
91.00
TSLL3
68.00
TSLL3
68.00
TSLM3
97.00
TSLP3
116.00
TSLP3
116.00
IPBM
38.50
IPBM
38.50
IPBM
38.50
IPBP
83.00
IPBP
—
—
—
—
—
—
—
—
LMAP1600
968.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
MBPG1600
MBPG1601
1211.00
1211.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-133
83.00
MOLDED CASE
CIRCUIT BREAKERS
Discount Schedule MCCB
6
A - Consult with Siemens for availability.
External Accessories
Connections
Discription
For DG Frame
150 A
Catalog
Number
Nut Keeper Plates
For ring/tongue terminal or bus bar connections.
(For metric threads on other than the JG or LG frame,
change ”TNK” to ”TMK”)
1 Nut Keeper Plate
Kit of 3
TNKD
TNKD3
6.10
19.40
TNKF
TNKF3
Mechanical Lugs
Steel Wrap Around Body (Cu Wire Only)
Cable Size; (cables per phase)
Single Lug
Kit of 3
#8-1/0; 1-hole
TW1DG20
3TW1DG20
7.20
22.00
#4-350 kcmil; 1-hole
TW1FG350
22.00
3TW1FG350
65.00
Aluminum Body (Al or Cu Wire)
Cable Size; (cables per phase)
Single Lug
Kit of 2
#6-3/0; 1-hole
TA1DG30
—
7.20
—
#4-350 kcmil; 1-hole
TAW1FG350
22.00
—
—
Kit of 3
3TA1DG30
22.00
3TAW1FG350
65.00
Cable Size; (cables per phase)
—
—
—
—
Single Lug
Kit of 2
Kit of 3
—
—
—
—
—
—
—
—
—
—
—
—
Cable Size; (cables per phase)
Single Lug
—
—
—
—
—
—
—
—
Kit of 3
—
—
—
—
#6-3/0; 1-hole
TC1DG30
—
33.50
—
#4-350 kcmil; 1-hole
TCW1FG350
34.50
—
—
MOLDED CASE
CIRCUIT BREAKERS
6
Copper Body (Cu Wire Only)
Cable Size; (cables per phase)
Single Lug
Kit of 2
101.00
List
Price $
3TCW1FG350
6.10
19.40
Kit of 3
3TC1DG30
Cable Size; (cables per phase)
Single Lug
—
—
—
—
—
—
#14-2/0; 1-cable
2CLD20
3CLD20
54.00
81.00
#6-350 kcmil; 1-cable
2CLF350
102.00
3CLF350
152.00
—
—
—
—
—
Compression Lugs
Cable Size; (cables per phase)
Kit of 2
Kit of 3
Cable Size; (cables per phase)
Kit of 2
Kit of 3
—
—
—
—
—
Cable Size; (cables per phase)
Kit of 3
—
—
—
—
—
—
Distribution Lugs
Cable Size; (cables per phase)
Single Lug
Kit of 3
Cable Size; (cables per phase)
Single Lug
Kit of 3
6-134
List
Price $
For FG Frame
250 A
Catalog
Number
#14-#2; 3-hole
TA3DG02
3TA3DG02
#14-#4; 6-hole
TA6DG04
3TA6DG04
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
31.50
110.00
33.50
110.00
#14-#1; 2-hole and
#14-2/0; 1-hole
TA3FG20
3TA3FG20
#14-#4; 6-hole
TA6FG04
3TA6FG04
104.00
—
—
37.00
110.00
37.00
110.00
Discount Schedule MCCB
For JG Frame
400 A
Catalog
Number
TMKJ
TMKJ3
List
Price $
List
Price $
For MG Frame
800 A
Catalog
Number
List
Price $
For NG Frame
1200 A
Catalog
Number
List
Price $
For PG Frame
1600 A
Catalog
Number
List
Price $
TNKL
TNKL3
9.80
29.00
TNKM
TNKM3
9.80
29.00
TNKP
TNKP3
9.80
29.00
TNKP
TNKP3
9.80
29.00
1/0-500 kcmil; 1-hole
TW1JG600
29.00
3TW1JG600
87.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3/0-250 kcmil; 2-hole
TA2JG250
29.00
—
—
#2-600 kcmil; 2-hole
—
—
2TA2LG600LD햲
72.00
2TA2LG600LN햳
72.00
3TA2LG600LD햲
109.00
3TA2LG600LN햳
109.00
3TA2JG250
6.10
19.40
For LG Frame
600 A
Catalog
Number
87.00
1/0-500 kcmil, 3-hole
TA3MG500
67.00
3TA3MG500
202.00
AL: 250-750 kcmil
CU: 3/0-600 kcmil; 1-hole
TA1JG750
36.00
—
—
3TA1JG750
109.00
AL: 250-750 kcmil
CU: 3/0-600 kcmil; 1-hole
TA1JG750 (400A max) 36.00
—
—
3TA1JG750 (400A max)109.00
500 -750 kcmil; 2-hole
TA2MG750
122.00
—
—
3TA2MG750
364.00
—
—
—
—
—
—
—
—
#2-600 kcmil; 3-hole
—
—
—
—
—
—
3TA3MG600햵
3/0-250 kcmil; 2-hole
TC2JG250
77.00
—
—
#6-350 kcmil; 2-cable
—
—
6CLL350
899.00
250-750 kcmil; 1-cable
—
—
3CLJ750
449.00
3TA4NG500
3TA4NG500H햴
3TA6PG750햶
291.00
875.00
500 -750 kcmil; 3-hole
TA3NG750
106.00
2TA3NG750
579.00
3TA3NG750
832.00
—
—
940.00
600-750 kcmil; 4-hole
TA4P750햷
254.00
—
—
300-600 kcmil; 5; 6-hole
320.00
TA5P600햷
TA6R600햷
338.00
—
—
1/0-500 kcmil; 3-hole
TC3MG500
134.00
—
—
1/0-500 kcmil; 4-hole
—
—
—
—
1/0-750 kcmil; 6-hole
—
—
—
—
—
—
3TC4NG500
3TC6PG750 (future) 1342.00
—
—
—
—
1/0-500 kcmil; 3-hole
TC3NG500
CSO
300-600 kcmil; 5-hole
TC5R600햷
426.00
1/0-500 kcmil; 3-cable
—
—
9CLM500 (future) 1056.00
1/0-500 kcmil; 4-cable
—
—
12CLN500
1393.00
#2-600 kcmil; 8-cable
—
—
24CLP600 (future) 2787.00
250 kcmil-750 kcmil; 1-cable
—
—
3CLL750
494.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
250-600 kcmil; 1-cable
3CLJ600
449.00
250 kcmil-600 kcmil; 2-cable
6CLL600
899.00
—
—
—
—
—
—
—
—
—
—
—
—
#14-#4; 12-hole
TA12JG04
3TA12JG04
#14-2/0; 6-hole
TA6JG20
3TA6JG20
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
88.00
265.00
88.00
265.00
—
—
—
—
—
—
832.00
All lug kits include the nut keepers.
햲 Mounted on Load Side Only.
햳 Mounted on Line Side Only.
햴 Rated 90° for 100% Applications.
햵 Requires extended modified shield.
햶 Used only with LMAP 1600 mounting base.
햷 Used with MBPG 1600 or 1601 mounting base.
Discount Schedule MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-135
MOLDED CASE
CIRCUIT BREAKERS
#6-350 kcmil; 1-cable
—
—
3CLJ350
449.00
1/0-750 kcmil; 6-hole
—
—
—
—
6
3/0-750 kcmil; 1-hole
TC1JG750
77.00
#2-600 kcmil; 2-hole
—
—
2TC2LG600LD햲
154.00
2TC2LG600LN햳
154.00
3TC2LG600LD햲
231.00
햳
3TC2LG600LN
231.00
—
—
—
—
218.00
1/0-500 kcmil; 4-hole
—
—
2TA4NG500
579.00
External Accessories
General
For DG Frame
150 A
Catalog
List
Number
Price $
For FG Frame
250 A
Catalog
List
Number
Price $
Handle Padlocking Device
To padlock breaker toggle in the “OFF” position. Accepts up
to 3 padlocks with 5–8 mm shackles.
HPLF
15.80
HPLF
15.80
Handle Blocking Device
For holding the handle in the “ON” or “OFF” position. Not a
lockout/tagout device.
HBDF
27.00
HBDF
27.00
Description
Handle Padlocking
Device
MOLDED CASE
CIRCUIT BREAKERS
6
Walking-Beam
Interlock Mechanism
Cable Interlock
System
6-136
Walking-Beam Interlock Mechanism
Provides mechanical interlocking between two adjacent
circuit breakers.
Fixed mounted breakers
Plug-in or draw-out mounted breakers (Future)
Note: Both breakers must be of the same frame size.
Cable Interlock Mechanism
Provides mechanical interlocking between 2 circuit-breakers includes operator mechanism for one circuit breaker only.
Combination with the next larger or smaller frame size is possible.
Interlock Cable
Cable only, to connect 2 circuit breakers.
Cable length 18 in. .46m (recommended up to 250A)
Cable length 36 in. .91m (recommended from 600–800A)
Cable length 54 in. 1.37m (recommended from 1200–1600A)
WBMFFM
WBMFDP
608.00
603.00
WBMFFM
WBMFDP
608.00
603.00
CBTF
481.00
CBTF
481.00
CBCF18
CBCM36
CBCP54
134.00
156.00
190.00
CBCF18
CBCM36
CBCP54
134.00
156.00
190.00
Mounting Screw Kit
Includes the necessary hardware to mount a circuit breaker to the
user’s prepared surface (SAE thread)
Kit with 2 screws
Kit with 4 screws
MSKF2
MSKF4
Trip Adjustment Sealing Cover
Includes a trip unit cover to prevent tampering or adjustment
of trip settings. Seal not included.
Electronic Trip Units
Thermal-Magnetic Trip Units
TSCPET
TSCFTM
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3.70
3.70
15.80
38.50
MSKF2
MSKF4
TSCPET
TSCFTM
3.70
3.70
15.80
38.50
Discount Schedule MCCB
For JG Frame
400 A
Catalog
List
Number
Price $
For LG Frame
600 A
Catalog
List
Number
Price $
For MG Frame
800 A
Catalog
List
Number
Price $
For NG Frame
1200 A
Catalog
List
Number
Price $
For PG Frame
1600 A
Catalog
List
Number
Price $
HPLL
22.00
HPLL
22.00
HPLM
57.00
HPLP
57.00
HPLP
57.00
HBDL
27.00
HBDL
27.00
HBDM
57.00
HBDP
57.00
HBDP
57.00
WBMLFM
WBMLDP
608.00
603.00
WBMLFM
WBMLDP
608.00
603.00
WBMMFM
WBMMDP
608.00
603.00
WBMPFM
WBMPDP
658.00
658.00
WBMPFM
WBMPDP
658.00
658.00
CBTL
515.00
CBTL
515.00
CBTM
548.00
CBTP
582.00
CBTP
582.00
—
CBCM36
CBCP54
—
156.00
190.00
—
CBCM36
CBCP54
—
156.00
190.00
—
CBCM36
CBCP54
—
156.00
190.00
—
—
CBCP54
—
—
190.00
—
—
CBCP54
—
—
190.00
—
10.90
—
MSKL4
—
10.90
—
MSKM4
—
15.80
—
MSKP4
—
29.00
—
MSKP4
—
29.00
TSCPET
TSCLTM
15.80
38.50
TSCPET
TSCLTM
15.80
38.50
TSCPET
TSCMTM
15.80
38.50
TSCPET
—
15.80
—
TSCPET
—
15.80
—
6
—
MSKL4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-137
MOLDED CASE
CIRCUIT BREAKERS
Discount Schedule MCCB
External Accessories
Ground Sensors & Electronic Accessories
Description
For DG Frame
150 A
Catalog
Number
Neutral Current Transformer (Ground Sensor, N-pole)
Neutral = 35/60A
Neutral = 100A
Neutral = 150A
Neutral = 250A
Neutral = 400A
Neutral = 600A
Neutral = 800A
Neutral = 1000/1200A
Neutral = 1600A
NGSD060
NGSF100
NGSF150
—
—
—
—
—
—
402.00
402.00
402.00
—
—
—
—
—
—
—
NGSF100
NGSF150
NGSJ250
—
—
—
—
—
—
402.00
402.00
402.00
—
—
—
—
—
EPSP18V
582.00
EPSP18V
582.00
Test Kit - Portable power supply for programming, trip test,
and checking CT’s plus a port for local communications of
currents flow and trip settings. (Requires two 9V batteries)
ELTPHB
Universal Power Supply - 120/240Vac adapter used in lieu of
9V batteries for Test Kit ELTPHB (includes necessary cables)
UPAPELTK
Power Supply with ZSI (for Model 576 trip units only).
COMPS
2013.00
COMPS
2013.00
Com10 Profibus Communications Module with ZSI
for LCD trip Model 576 only
COMPRO
2684.00
COMPRO
2684.00
Com11 Modbus Communications Module with ZSI
for LCD Trip Model 576 only
COMMOD
2684.00
COMMOD
2684.00
Communications Adapter - Interface with a laptop or PC
to test or program Model 545 & 576 trip units
CSAPELTU
911.00
CSAPELTU
911.00
Cable for COM10/11 and Model 576 external
power supply……5ft. (1.5m)
COMKIT1
179.00
COMKIT1
179.00
Extension cable for COMKIT1 & COMKIT2, adds 5 ft.
COMEXT
134.00
COMEXT
134.00
Spare flat cable for Test Kits or Communications Adapters
COMPCA
358.00
COMPCA
358.00
RS232 type cable for Test Kits or Communications Adapters
COMP232
179.00
COMP232
179.00
Cover Frame for Door Cutout
For fixed or plug-in mounted circuit breakers. (IP30)
2-Pole & 3-Pole
BZLF3
224.00
BZLF3
224.00
For breakers with stored energy operator. (IP40)
BZLFRHSE
224.00
BZLFRHSE
224.00
(not for use with rotary handle or stored energy operator)
BZLFBDC
224.00
BZLFBDC
224.00
Toggle Handle Extension
For spare or replacement. (One is included with each
LG - PG frame.)
—
Spare Flat
Cable
Power Stick
RS232 Cable
Com10 Profibus &
Com11 Modbus
Communications
Module
3428.00
537.00
ELTPHB
List
Price $
6
List
Price $
MOLDED CASE
CIRCUIT BREAKERS
Communications & Electronics
Power Stick - Hand held, battery operated power supply for
LCD trip units. (Requires two -9V batteries)
For programming and trip testing only.
For FG Frame
250 A
Catalog
Number
UPAPELTK
3428.00
537.00
Door Cutouts & Extensions
Cover Frame for
Door Cutout
Circuit-breaker draw-out mounted and toggle handle operated.
Kit includes cover frame (bezel) and escutcheon as needed. (IP40)
—
—
—
Toggle Handle
Extension
6-138
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule MCCB
For JG Frame
400 A
Catalog
List
Number
Price $
For LG Frame
600 A
Catalog
Number
List
Price $
For MG Frame
800 A
Catalog
List
Number
Price $
For NG Frame
1200 A
Catalog
List
Number
Price $
For PG Frame
1600 A
Catalog
List
Number
Price $
—
—
—
NGSJ250
NGSL400
—
—
—
—
—
—
—
402.00
402.00
—
—
—
—
—
—
—
—
NGSL400
NGSM600
—
—
—
—
—
—
—
402.00
402.00
—
—
—
—
—
—
—
—
NGSM600
NGSN800
—
—
—
—
—
—
—
402.00
402.00
—
—
—
—
—
—
—
—
NGSN800
NGSP120
—
—
—
—
—
—
—
402.00
402.00
—
—
—
—
—
—
—
—
NGSP120
NGSP160
—
—
—
—
—
—
—
402.00
402.00
EPSP18V
582.00
EPSP18V
582.00
EPSP18V
582.00
EPSP18V
582.00
EPSP18V
582.00
ELTPHB
UPAPELTK
3428.00
537.00
ELTPHB
UPAPELTK
3428.00
537.00
ELTPHB
UPAPELTK
3428.00
537.00
ELTPHB
UPAPELTK
3428.00
537.00
ELTPHB
UPAPELTK
3428.00
537.00
COMPS
2013.00
COMPS
2013.00
COMPS
2013.00
COMPS
2013.00
COMPRO
2684.00
COMPRO
2684.00
COMPRO
2684.00
COMPRO
2684.00
COMPRO
2684.00
COMMOD
2684.00
COMMOD
2684.00
COMMOD
2684.00
COMMOD
2684.00
COMMOD
2684.00
CSAPELTU
911.00
CSAPELTU
911.00
CSAPELTU
911.00
CSAPELTU
911.00
CSAPELTU
911.00
COMKIT2
179.00
COMKIT2
179.00
COMKIT2
179.00
COMKIT1
179.00
COMKIT1
179.00
COMEXT
134.00
COMEXT
134.00
COMEXT
134.00
COMEXT
134.00
COMEXT
134.00
COMPCA
358.00
COMPCA
358.00
COMPCA
358.00
COMPCA
358.00
COMPCA
358.00
COMP232
179.00
COMP232
179.00
COMP232
179.00
COMP232
179.00
COMP232
179.00
BZLL3
224.00
BZLL3
224.00
BZLM3
279.00
BZLP3
279.00
BZLP3
279.00
BZLLRHSE
224.00
BZLLRHSE
224.00
BZLMRHSE
279.00
BZLPRHSE
279.00
BZLPRHSE
279.00
BZLLBDC
224.00
BZLLBDC
224.00
BZLMBDC
279.00
BZLPBDC
279.00
BZLPBDC
279.00
THEM
105.00
THEP
105.00
THEP
105.00
THEL
63.00
THEL
Discount Schedule MCCB
63.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-139
MOLDED CASE
CIRCUIT BREAKERS
2013.00
6
COMPS
Molded Case Circuit Breakers
Accessory Locations
Selection
Locations of Internally Mounted Accessories
Frame Family
DG*, FG*, JG, LG
Left Pocket
Right Pocket
Up to 3 Auxiliary Switches
150 to 600A
Up to 2 Auxiliary Switches + 1 Alarm Swich
MG, NG, PG
Shunt Trip or UVR or up to 3 Auxiliary Switches
or up to 2 Auxiliary Switches + 1 Alarm Switch
Shunt Trip or UVR or up to 3 Auxiliary Switches
or up to 2 Auxiliary Switches + 1 Alarm Switch
Up to 4 Auxiliary Switches
Shunt Trip or UVR or up to 4 Auxiliary Switches
Up to 2 Auxiliary Switches + 2 Alarm Swiches
Shunt Trip or UVR or up to 4 Auxiliary Switches
800 to 1600A
MOLDED CASE
CIRCUIT BREAKERS
6
* Except DG and FG breakers with Electronic Trip Units. Due to the location of the Magnetic Latch, the Left Pocket is not available for accessories.
Accessory Information
▪ Aux. Switch is an Auxiliary Switch, 1A
or 1B contact
▪ Alarm Switch has 1A or 1B contact
▪ UVR is an Undervoltage Release
▪ The standard location for factory
mounted Auxiliary and Alarm Switches
is the Left Pocket
▪ For 4-pole breakers, the 4th pole (located on the far left) can hold up to 3
Auxiliary Switches on DG, FG, JG, and
up to 4 Auxiliary Switches on MG, NG,
and PG breakers
6-140
Accessory Maximums
DG, FG, JG, LG Maximum Accessories:
▪ Maximum of six (6) switches total
▪ DG, FG Maximum of two (2) Alarm
Switches, one each in the Left and
Right Pockets. JG, LG Max. of 1 Alarm,
Left only
▪ Maximum of three (3) switches combined in 4th Pole and Left Pockets
MG, NG, PG Maximum Accessories:
▪ Maximum of eight (8) switches total
▪ Maximum of two (2) Alarm Switches,
Left Pocket only
▪ Maximum of four (4) switches combined in 4th Pole and Left Pockets
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Selection
Suffix for factory mounted Switch Combinations
If the frame is:
DG, FG, JG or LG
And you need these functions:
1 Alarm Switch
1 NO Alarm
1 NC Alarm
Then add
this suffix:
Device
Catalog Number
A1
ASKL1
DG, FG, JG or LG
2 Aux. Switches
1 NO + 1 NC Aux. Contacts
A2
ASKL2
DG, FG, JG or LG
2 Aux. + 1 Alarm Switches
1NO + 1NC Aux. and 1NO Alarm
1NO + 1NC Aux. and 1NC Alarm
2NO Aux. and 1NC Alarm
2NC Aux. and 1NO Alarm
A3
ASKL3
MG, NG or PG
2 Aux. + 2 Alarm Switches
1NO + 1NC Aux. and 1NO + 1NC Alarm
2NO Aux. and 2NC Alarm
2NC Aux. and 2NO Alarm
A3
ASKP3
MG, NG or PG
4 Aux. Switches
2NO + 2NC Aux.
A4
ASKP4
And you need these functions:
24V DC
48-60V DC
110-127V DC
220-250V DC
48-60V AC
110-127V AC
208-277V AC
380-600V AC
Then add
this suffix:
RB
RC
RD
RE
RM
RN
RS
RV
Device
Catalog Number
STRLB24DC
STRLC60DC
STRLD125DC
STRLE250DC
STRLM60
STRLN120
STRLS277
STRLV600
24V DC
48-60V DC
110-127V DC
220-250V DC
48-60V AC
110-127V AC
208-277V AC
380-600V AC
RB
RC
RD
RE
RM
RN
RS
RV
STRPB24DC
STRPC60DC
STRPD125DC
STRPE250DC
STRPM60
STRPN120
STRPS277
STRPV600
And you need these functions:
12V DC
24V DC
48V DC
60V DC
110-127V DC
220-250V DC
110-127V AC
220-240V AC
208V AC
277V AC
380-415V AC
440-480V AC
600V AC
Then add
this suffix:
UA
UB
UC
UG
UD
UE
UN
UR
UP
US
UT
UU
UV
Device
Catalog Number
UVRLA12DC
UVRLB24DC
UVRLC48DC
UVRLG60DC
UVRLD125DC
UVRLE250DC
UVRLN120
UVRLR240
UVRLP208
UVRLS277
UVRLT415
UVRLU480
UVRLV600
12V DC
24V DC
48V DC
60V DC
110-127V DC
220-250V DC
110-127V AC
220-240V AC
208V AC
277V AC
380-415V AC
440-480V AC
600V AC
UA
UB
UC
UG
UD
UE
UN
UR
UP
US
UT
UU
UV
UVRPA12DC
UVRPB24DC
UVRPC48DC
UVRPG60DC
UVRPD125DC
UVRPE250DC
UVRPN120
UVRPR240
UVRPP208
UVRPS277
UVRPT415
UVRPU480
UVRPV600
Suffix for factory mounted Shunt Trips
If the frame is:
DG, FG, JG or LG
6
MOLDED CASE
CIRCUIT BREAKERS
MG, NG or PG
Suffix for factory mounted Under Voltage Releases
If the frame is:
DG, FG, JG or LG
MG, NG or PG
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-141
Technical Data
MOLDED CASE
CIRCUIT BREAKERS
6
Max rated continuous current
Rated operational voltage
NEMA
IEC
Rated Impulse Withstand Voltage
Main conducting paths
Auxiliary circuits
Ambient Temperature Range
High Ambient Derating (thermal-mag.)
DG
FG
JG
LG
MG
NG
PG
150
250
400
600
800
1200
1600
V AC
V AC
600
690
600
690
600
690
600
690
600
690
600
690
600
690
kV
kV
ºC
50ºC
60ºC
70ºC
8
4
-25 to +75
93%
86%
80%
20,000
120
8
4
-25 to +75
93%
86%
80%
20,000
120
8
4
-25 to +75
93%
86%
80%
20,000
120
8
4
-25 to +75
93%
86%
80%
10,000
60
8
4
-25 to +75
95%
86%
80%
5,000
60
8
4
-25 to +75
95%
86%
80%
3,000
30
8
4
-25 to +75
95%
80%
74%
3,000
30
15 – 48
40
32 – 80
60
60 – 175
90
85 – 230
160
170 – 250
250
150 – 220
210
200 – 260
260
—
—
—
—
—
—
—
30
30
30
30
42
42
42
18
25
35
35
65
65
65
10
5
10
5
10
5
10
5
10
5
10
5
10
5
V
0.7 – 1.1
0.7 – 1.1
0.7 – 1.1
0.7 – 1.1
0.7 – 1.1
0.7 – 1.1
0.7 – 1.1
VA
VA
VA
VA
W
W
W
W
ms
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
401 – 501
424 – 489
533 – 736
408 – 645
594
740 – 925
559 – 648
722 – 820
50
Operating Cycles
Max switching rate (per hour)
Power loss (at max. rated current)
Thermal-magnetic
W
Electronic trip unit
W
IEC ���
Time constant t = 10 ms
1 current path 2 current paths 3 current paths
in series
in series
Up to 250V DC 440V DC
600V DC
NEMA
Time constant t = 8 ms
2 poles switching 1 current path
250V DC Max. ���
3 poles switching 2 current paths in series
500V DC Max. ���
Accessories
Auxiliary / Alarm Switch
Current rating (1 or 2 switches)
Current rating (3 or 4 same switch) A
Shunt Trip
Pick-up voltage
Power Consumption (short-time) at:
48 – 60 V AC
110 – 127 V AC
208 – 277 V AC
380 – 600 V AC
24 V DC
48 – 60 V DC
110 –127 V DC
220 – 250 V DC
Max. Operating time
���
���
Consult Siemens for short circuit values.
Review individual frame and type values.
6-142
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Technical Data
Undervoltage Trip
Drop voltage (percentage)
Pick-up voltage (percentage)
Power consumption (continuous) at:
110 – 127 V AC VA
220 – 250 V AC VA
208 V AC
VA
277 V AC
VA
380 – 415 V AC VA
440 – 480 V AC VA
500 – 525 V AC VA
600 V AC
VA
Max. opening time
FG
V
V
1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
ms
ms
ms
s
s
VA/W
JG
LG
MG
NG
PG
35% – 70% 35% – 70% 35% – 70%
70% – 85% 70% – 85% 70% – 85%
35% – 70%
70% – 85%
35% – 70% 35% – 70%
70% – 85% 70% – 85%
35% – 70%
70% – 85%
1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
1.1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
1.1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
1.1
2.1
1.2
1.4
1.9
2.2
2.5
2.8
50
50
X
X
X
X
120
20 – 50
<100
<5
<5
<500
120
20 – 50
<100
<5
<5
120
20 – 50
<100
<5
<5
60
20 – 50
<100
<5
<5
X
X
60
20 – 50
<100
<5
<5
X
X
30
—
<5,000
<5
<5
X
30
—
<5,000
<5
<5
6
Motorized Operating Mechanism
Motor with stored energy mechanism
(synchronizable)
Motor Operator
Max. switching rate (per hour)
Command duration
Closing time
Charging time
Break time
Power consumption
Inrush (A)
Control Voltages 110 – 127 V AC
220 – 250 V AC
24 V DC
48 V DC
60 V DC
DG
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MOLDED CASE
CIRCUIT BREAKERS
Operating Range 85 – 110% of rated control voltage
6-143
Molded Case Circuit Breakers
Unusual Operating Conditions
Reference
High Ambient Temperatures
Because thermal-magnetic trip breakers
are temperature sensitive and calibrated
for a specific ambient of 40° C (104° F)
(average enclosure temperature), a
higher ambient will cause the breaker to
trip at lower current than its nameplate
rating, in other words, causing the
breaker to “derate” (see Table 1).
Similarly, the current carrying capacity
of a circuit conductor is based upon a
certain ambient temperature, a higher
ambient will reduce its current carrying
capacity, causing it to “derate.” Thus,
with a fluctuating temperature, a
thermal-magnetic breaker will derate
nearly parallel with its connected circuit
conductors and maintain close circuit
protection. If the application temperature
exceeds 40° C (104° F) and is known,
either a breaker specially calibrated for
the higher ambient or one oversized
according to Table 1 may be selected.
In a case such as this, the circuit
conductors should be oversized as well.
Siemens Electronic Trip Unit Breakers
are insensitive to temperature changes.
However, they do include circuitry to
protect the components from
abnormally high temperatures.
Moisture — Corrosion
For atmospheres having high moisture
content and / or where fungus growth is
prevalent, a special preventive treatment
may be required.
Where the air is heavily laden with
corrosive elements, breakers made
with special corrosion-resistant
finishes may be required.
Altitude
Reduced air density at altitudes greater
than 6600 ft. (2000 meters) affects the
ability of a molded case circuit breaker
to transfer heat and interrupt faults.
Therefore, circuit breakers applied at
these altitudes should have interrupting,
insulation and continuous currents
derated as indicated in Figure 1.
Table 1 — Temperature Derating Data for Thermal-Magnetic Breakers
Reference
Ampere
Rating at
40° C (104° F)
0015
0020
0025
0030
0035
0040
0050
0060
0070
0090
0100
0125
0150
0175
0200
0225
0250
0300
0350
0400
0500
0600
0700
0800
0900
1000
1200
1400
1600
1800
2000
Ampere Rating at:
25° C
50° C
(77° F)
(122° F)
0017
0013
0022
0018
0028
0023
0033
0028
0039
0030
0044
0037
0055
0046
0066
0056
0077
0065
0099
0084
0110
0094
0137
0114
0165
0136
0192
0159
0220
0182
0247
0205
0275
0235
0330
0276
0385
0325
0440
0372
0550
0468
0660
0564
0770
0658
0880
0754
0990
0828
1100
0900
1320
1090
1540
1304
1760
1500
1980
1690
2200
1880
60° C
(140° F)
0011
0016
0021
0026
0025
0034
0042
0052
0060
0078
0087
0100
0120
0140
0160
0180
0220
0252
0301
0340
0435
0525
0613
0704
0749
0825
1000
1148
1320
1485
1650
Siemens Breaker Frames
BQ,
BL,
BQD,
CQD,
NGG,
NGB,
ED
DG
FG
JG
LG
MG
NG
PG
13,000 (4,000)
Altitude in Feet (Meters)
MOLDED CASE
CIRCUIT BREAKERS
6
Note: The information provided on this and the next page is intended for reference and recommendation only. Because several
variables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing,
than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.
12,000 (3,675)
11,000 (3,350)
10,000 (3,000)
9,000 (2,750)
8,000 (2,400)
7,000 (2,100)
6,000 (1,800)
1.0
.95
.90
.85
Rating Correction Factor
Figure 1 — Altitude Adjustment
6-144
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
.80
.75
Molded Case Circuit Breakers
Unusual Operating Conditions
400 Hz
Reference
Systems 햲
Siemens molded case circuit breakers
can be applied for overcurrent protection
on 400Hz systems, commonly used to
power computer installations, aircraft,
military and other specialty equipment.
Below are basic guidelines.
Circuit Breaker Derating Required
This table lists the maximum continuous
current carrying capacity for Siemens
breakers at 400Hz. Due to the increased
resistance of the copper sections
resulting from the skin effect produced
by eddy currents at these frequencies,
circuit breakers in many cases require
derating. The thermal derating on these
devices is based upon 100%,
three phase application in open air in a
maximum of 40° C (104° F) with 48 in.
(1219 mm) of the specified cable or bus
at the line and load side. Additional
derating of not less than 20% will be
required if the circuit breaker is to be
utilized in an enclosure. Further derating
may be required if the enclosure
ambient temperature exceeds 40° C
(104° F).
Cable and Bus Sizing
The cable and bus sizes to be utilized
at 400Hz are not based on standard
National Electric Codes tables for 60Hz
application. Larger cross sections are
necessary at 400Hz. All bus bars
specified are based upon mounting
the bars in the vertical plane to allow
maximum air flow. All bus bars are
spaced at a minimum of 0.25 in. (6 mm)
apart. Mounting of bus bars in the
horizontal plane will necessitate
additional drafting. Edgewise orientation
of the bus may change the maximum
ratings indicated. If additional information
is required for other connections of cable
or bus, contact Siemens for information.
Application Recommendations
It is recommended that temperatures be
measured on the line and load terminals
or T-connectors of the center pole. These
are usually the hottest terminals with a
balanced load. A maximum temperature
of 75° C (35° C over a maximum ambient
of 40° C) would verify the particular
application. Temperature profiles taken
on these breakers can be correlated to
ensure that the hottest points within
the breaker are within the required
temperature limits.
Factory Configuration
When required, molded case circuit
breakers may be factory calibrated for
400Hz application. These breakers are
specially labeled for 400Hz usage and
their nameplate current rating will
include the necessary derating factory.
The highest “Maximum Continuous
Amperes” rating at 400Hz, found in the
table below approximates the highest
specially calibrated 400Hz nameplate
ampere rating available for a given
frame size. Contact Siemens for
ordering information on other
breakers applied in 400Hz systems.
400Hz Breakers
Siemens
Breaker
Type
FG
햲 The
information provided on this page is intended for
reference and recommendation only. Because several
variables can act on a circuit breaker’s performance
at the same time, the data above is based less on
controlled testing, than on experience and engineering
Siemens
Breaker
Type
JG
JG 100% Rated
LG
MG
MG 100% Rated
NG
NG 100% Rated
PG
PG 100% Rated
Maximum Continuous Ampere Rating
At 40° C (104° F) 햳
60HZ
400HZ
Enclosed
Open Air
Open Air 햴
After Derating
250
210
168
300
240
192
350
260
208
400
300
240
250
210
210
300
240
240
350
260
260
400
300
300
400
300
240
500
375
300
600
420
336
600
430
360
700
500
400
800
560
448
600
430
430
700
500
500
800
560
560
800
560
448
900
600
480
1000
650
520
1200
780
624
900
600
600
1000
650
650
1200
780
780
1200
780
624
1400
850
680
1600
960
768
1200
780
780
1400
850
850
1600
960
960
judgment. Contact Siemens for further information on
special conditions and treatment.
derating may be required if the ambient
temperature is greater than 40°C (104°F).
햳 Additional
75° C (167° F)
Copper
Cable per Pole
No of
Wire
Pieces
Size
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#2/0
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#3/0
2
#3/0
2
250 kcmil
2
350 kcmil
2
350 kcmil
3
250 kcmil
3
300 kcmil
2
350 kcmil
3
250 kcmil
3
300 kcmil
3
300 kcmil
3
350 kcmil
3
400 kcmil
4
350 kcmil
3
350 kcmil
3
400 kcmil
4
350 kcmil
4
400 kcmil
4
500 kcmil
5
500 kcmil
4
400 kcmil
4
500 kcmil
5
500 kcmil
햴 Calculated
after derating to compensate for the heating
of the copper conductor, caused by the skin effect
generated by eddy currents produced at 400/415HZ.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-145
MOLDED CASE
CIRCUIT BREAKERS
DG
75° C (167° F)
Copper
Cable per Pole
No of
Wire
Pieces
Size
1
#14
1
#12
1
#14
1
#12
1
#10
1
#10
1
#10
1
#8
1
#8
1
#8
1
#6
1
#4
1
#4
1
#3
1
#3
1
#2
1
#1
1
#8
1
#6
1
#4
1
#4
1
#3
1
#3
1
#2
1
#1
1
#1/0
1
#3
1
#2
1
#1
1
#1/0
1
#2/0
1
#3/0
1
#4/0
1
250 kcmil
6
NGG, EG
Maximum Continuous Ampere Rating
At 40° C (104° F) 햳
60HZ
400HZ
Enclosed
Open Air
Open Air 햴
After Derating
015
015
012
020
020
016
15
15
12
20
20
16
25
25
20
30
30
24
35
35
28
40
40
32
45
43
34
50
48
38
60
57
46
70
67
54
80
76
61
90
86
69
100
95
76
110
105
84
125
119
95
50
48
38
60
57
46
70
63
50
80
72
58
90
80
64
100
90
72
110
95
75
125
105
84
150
125
100
100
90
72
110
95
75
125
105
84
150
125
100
175
140
112
200
160
128
225
180
144
250
200
160
Sentron® Molded Case Circuit Breakers
Series Connected Short Circuit Ratings
The term “Series Connected Short
Circuit Rating” refers to the application of
series circuit breakers in a combination
that allows downstream breakers to have
lower individual interrupting ratings than
the available fault current.
This is permitted as long as the series
combination has been tested and certified by UL.
The tables on these pages list specific
main and branch breaker combinations
that may be used for the short circuit
interrupting ratings shown.
240V Series Ratings
Type
Branch Breaker
Maximum
Amperes Type
QPPH
070 (1P)
125 (2P)
100 (3P)
225 (2P)
22,000
Main Breaker
Number
of Poles
1
2
3
Amperes
15–70
15–125
15–100
QE, BLE,
QPF, BLF, QAF, BAF
2
15–60
QE, BLE, BE, QPF,
BQF, BLF, QAF, BAF
1
15–30
QP, BQ, BL
QPH, BQH,
BLH
QT
1, 2
15–40
QG, BG
1, 2
15–30
QP, BQ, BL
1
2
15–70
15–125
QE, BLE, BE, QPF,
BQF, BLF, QAF, BAF
1
15–30
QE, BLE, BE,
QPF, BLF, QAF, BAF
2
15–60
QPP
2
125–200
QT
1, 2
15–25
35–70
2
15–25
35–125
1
2
15–30
15–60
6
200 (2P)
MOLDED CASE
CIRCUIT BREAKERS
QE, QPF, QAF, BAF
QJH2
42,000
QJ2H
225
(2 & 3P)
225
(2 & 3P)
070 (1P)
HQP, HBQ, HBL 125 (2P)
100 (3P)
65,000
HQPP
6-146
225 (2P)
UL Series
Connected
Rating
Type
ED4, ED6
Branch Breaker
Maximum
Number
Amperes Type
of Poles Amperes
QEH, BLEH, QE, QPHF,
BLHF, BLE, QPF, BLF, 2
15–60
QAFH, BAFH, QAF, BAF
100 (1P)
125 (2 & 3P)
QT
1, 2
QPPH, QPP
2
125–200
QP, BQ, BL,
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
65,000
FD6-A, FXD6-A
15–30
QEH, BLEH, QE, QPHF,
BLHF, BLE, QPF, BLF, 2
QAFH, BAFH, QAF, BAF
15–60
ED2
1, 2, 3
15–100
QT
1, 2
15–40
QP, BQ, BL,
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
250 (2 & 3P)
QPF, QPHF, BLF, BLHF,
1, 2
QAF, QAHF, BAF, BAHF
(Continued)
15–40
QPHF, BQHF, BLHF,
QPF, BQF, BLF, QE,
1
QEH, BLEH, BE, BLE,
QAFH, BAFH, QAF, BAF
15–40
1
QP
QPMH
No substitutions are permitted. All combinations shown have been tested and
are UL Listed. This information is provided as a reference tool only. For verification of specific combination ratings
consult the UL Recognized
Components Directory.
240V Series Ratings (Continued)
Main Breaker
UL Series
Connected
Rating
General
15–60
QJ2H, QJ2, QJH2
2, 3
QPPH
2
125–225
60–225
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
QT
2
15–30
QP, BQ, BL
1
2
3
15–70
15–125
60–100
JXD2-A, JD6-A,
JXD6-A, LD6-A,
LXD6-A
QJ2H, QJH2
2, 3
60–225
QPF, BQF, BLF, BG, BLG,
1
QE, BE, BLE, QAF, BAF
15–30
QPF, BLF, BG, BLG,
2
QE, BE, BLE, QAF, BAF
15–60
HJD6-A, HJXD6-A
HLD6-A, HLXD6-A
HMD6, HMXD6
2000
HND6, HNXD6
(2 & 3P)
HPD6, HPXD6
HRD6, HRXD6
QPH
1
2
3
15–70
15–125
15–100
SJD6-A, SLD6-A,
SMD6, SND6,
1600
SPD6
(2 & 3P)
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
MD6, MXD6
ND6, NXD6
PD6, PXD6
RD6, RXD6
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
1
2
3
15–70
15–125
15–100
QT
1, 2
15, 20, 40
QP, BQ, BL
1
2
3
15–70
15–125
60–100
QPH, BQH,
BLH
1
2
3
15–70
15–125
15–100
600 (2 & 3P)
2000
(2 & 3P)
QJH2
2, 3
60–225
QP, BQ, BL,
QPH, BQH, BLH
1
2
3
15–70
15–125
15–100
QP, BQ, BL,
QPH, BQH, BLH,
HQP, HBQ, HBL
QPF, BQF, BLF, BE,
QPHF, BQHF, BLHF,
1
QEH, BLEH, QE, BLE,
QAFH, BAFH, QAF, BAF
15–30
QEH, BLEH, QE, BE,
QPHF, BQHF, BLHF,
1
QPF, BLF, BQF, BLE,
QAFH, BAFH, QAF, BAF
15–30
QEH, BLEH, QE, QPHF,
BLHF, BLE, QPF, BLF,
2
QAFH, BAFH, QAF, BAF
15–60
125 (2 & 3P) QEH, BLEH, QPHF, QE,
BLHF, QPF, BLF, BLE,
2
QAFH, BAFH, QAF, BAF
15–60
HED4, HED6
100,000
QT
1, 2
15–40
ED2
1, 2, 3
15–100
QG, BG
1, 2
15–30
ED4
1
15–100
QP, BQ, BL,
QPH, BQH, BLH
1
2
15–70
15–125
ED4, ED6
2, 3
15–125
QT
1, 2
15–40
ED2, ED4
1
15–100
QPF, BQF, BLF, QPHF,
BQHF, BLHF, QEH,
1
BLEH, QE, BLE, BE,
QAFH, BAFH, QAF, BAF
15–30
HED4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
100 (1P)
Sentron® Molded Case Circuit Breakers
Series Connected Short Circuit Ratings
General
240V Series Ratings (Continued)
UL Series Main Breaker
Connected
Rating
Type
HQPPH
Branch Breaker
Maximum
Amperes Type
QP, BQ, BL,
QPH, BQH, BLH,
HQP, HBQ, HBL
HQPP, QPPH, QPP
225 (2P)
1
2
15–70
15–125
2
125–225
FD6-A FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
ED4
1
15–100
ED4, ED6
2,3
15–125
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
200–600
Amperes
15–100
15–125
15–60
QT
1, 2
15–40
1
15–25
35–70
2
15–25
35–125
LD6-A
2, 3
LXD6-A
2, 3
450–600
3
15–100
SLD6-A
3
300–600
1
2
3
15–70
15–125
15–100
ED4
1
15–100
ED4, ED6
2, 3
15–125
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
225 (2 & 3P)
QEH, BLEH, QE, BE,
QPHF, BQHF, BLHF,
1
QPF, BQF, BLF, BLE,
QAFH, BAFH, QAF, BAF
15–30
QEH, BLEH, QPHF, BLE,
BLHF, QE, QPF, BLF,
2
QAFH, BAFH, QAF, BAF
15–60
QT
1
15–50
QP, BQ, BL,
QPH, BQH, BLH,
HQP, HBQ, HBL
1
2
3
15–70
15–125
15–100
QPF, BLF, BLE, BLEH,
250 (2 & 3P) QPHF, BLHF, QEH, QE, 2
QAFH, BAFH, QAF, BAF
SHLD6-A
HMD6,HMXD6
600 (3P)
800 (2 & 3P)
MD6, MXD6 SMD6 2,3
100,000
(Continued)
SHMD6
800 (3P)
15–30
1
15–100
ED4, ED6
2, 3
15–125
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
MD6, MXD6, SMD6 2, 3
15–60
500–800
ED4
500–800
ED4
1
15–100
ED4
1
15–100
ED4, ED6
2, 3
15–125
ED4, ED6
2, 3
15–125
FD6-A, FXD6-A
2, 3
70–250
FD6-A, FXD6-A
2, 3
70–250
2, 3
200–400
QJ2, QJH2, QJ2H
2, 3
60–225
JD6-A, JXD6-A,
JXD2-A, SJD6-A
HQPP, QPPH, QPP
2
125–225
HND6, HNXD6,
SHND6
1200 (2 & 3P)
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
QT
1, 2
15–40
ED4
1
15–100
ED4, ED6
2, 3
15–125
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
ED4
1
15–100
ED4, ED6
2, 3
15–125
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
MD6, MXD6, SMD6 2, 3
LXD6-A
2, 3
450–600
ND6, NXD6, SND6
2, 3
500–1200
SLD6-A
3
300–600
PD6, PXD6, SPD6
2, 3
1200–1600
400 (2 & 3P) FD6-A, FXD6-A
600 (2 & 3P)
Number
of Poles
1
2, 3
HPD6, HPXD6,
SHPD
1600 (3P)
MD6, MXD6, SMD6 2, 3
500–800
ND6, NXD6, SND6
2, 3
500–1200
ED4
1
15–100
ED4, ED6
2, 3
15–125
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
500–800
6-147
MOLDED CASE
CIRCUIT BREAKERS
HLD6-A
600 (2 & 3P)
Type
ED4
ED4, ED6
6
HJD6-A,
HJXD6-A,
SHJD6-A
HLXD6-A
Branch Breaker
Maximum
Amperes
QE, QEH, BLEH, QPHF,
BLHF, QPF, BLF, BLE, 2
QAFH, BAFH, QAF, BAF
QE, BE, BLE, QPHF,
BQHF, BLHF, QPF, BQF, 1
BLF, QEH, BLEH, BAF,
QAFH, BAFH, QAF
HFD6, HFXD6
Main Breaker
UL Series
Connected
Type
Rating
15–30
QPH, BQH, BLH,
HQP, HBQ, HBL
100,000
(Continued)
Number
of Poles Amperes
QEH, BLEH, QE, BE,
QPHF, BQHF, BLHF,
1
QPF, BQF, BLF, BLE,
QAFH, BAFH, QAF, BAF
QP, BQ, BL
HQJ2H
240V Series Ratings (Continued)
Sentron® Molded Case Circuit Breakers
Series Connected Short Circuit Ratings
General
240V Series Ratings (Continued)
UL Series Main Breaker
Connected
Rating
Type
Branch Breaker
Maximum
Amperes
Type
ED4
P
1
ED4, ED6
2, 3
FD6-A, FXD6-A
2, 3
JD6-A, JXD6-A,
JXD2-A, SJD6-A
100,000
HRD6, HRXD6
(Continued)
2000 (3P)
125 (2 & 3P)
6
MOLDED CASE
CIRCUIT BREAKERS
250 (2 & 3P)
HHJD6, HHJXD6,
600 (2 & 3P)
HHLD6, HHLXD6
CJD6-A
6-148
400 (2 & 3P)
Branch Breaker
Maximum
Amperes
15–125
Type
QPH, BQH, BLH,
HQP, HBQ, HBL
P
2
3
70–250
ED4, ED6
2, 3
15–25
2, 3
70–250
2, 3
200–400
200–400
CLD6-A
FD6-A, FXD6-A,
600 (2 & 3P) HFD6, HFXD6
Amperes
100–125
100
LD6-A
2, 3
200–600
2, 3
450–600
SLD6-A
3
300–600
LD6-A, HLD6-A
2, 3
200–600
MD6, MXD6, SMD6
2, 3
500–800
LXD6-A, HJXD6-A
2, 3
450–600
15–30
ND6, NXD6, SND6
2, 3
500–1200
QT
1, 2
PD6, PXD6, SPD6
2, 3
1200–1600
ED4, ED6
1
RD6, RXD6
2, 3
1600–2000
QP, BQ, BL,
QPH, BQH, BLH,
HQP, HBQ, HBL
1
2
3
ED4, ED6,
HED4, HED6
1
15–70
15–125
15–100
FD6-A, FXD6-A,
HFD6, HFXD6
15–30
CMD6
JXD2-A, JD6-A,
JXD6-A, HJD6-A,
800 (2 & 3P) HJXD6-A
2, 3
15
15–125
2, 3
70–250
2, 3
200–400
QEH, BLEH, QAFH, QE,
QPHF, BLHF, QPF, BLE, 2
BLF, BAFH, QAF, BAF
LD6-A, HLD6-A
2, 3
200–600
15–60
LXD6-A, HLXD6-A
2, 3
450–600
500–800
1
15–100
MD6, MXD6,
HMD6, HMXD6
2, 3
ED4, HED4
ED4, ED6,
HED4, HED6
2, 3
15–125
MD6, MXD6,
HMD6, HMXD6
2, 3
500–800
15–40
ED4, ED6
1
15
15–70
15–125
15–100
ED4, ED6,
HED4, HED6
2, 3
15–125
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
2, 3
200–400
QP, BQ, BL,
QPH, BQH, BLH,
HQP, HBQ, HBL
CFD6
UL Series Main Breaker
Connected
Rating
Type
LXD6-A
QT
200,000
2, 3
Amperes
15–100
JXD2-A, JD6-A,
JXD6-A, HJD6-A,
HJXD6-A
QPHF, BQHF, BLHF,
QPF, BQF, BLF, QEH,
QE, BE, BLEH, QAFH,
BLE, BAFH, QAF, BAF
CED6
240V Series Ratings (Continued)
1, 2
1
2
3
SCMD6
800 (3P)
QPHF, BQHF, BLHF,
QE, BE, BLE,
1
QPF, BQF, BLF,
QEH, BLEH, QAF, BAF
15–30
QPHF, BLHF, QE,
BLE, QPF, BLF,
2
QEH, BLEH, QAF, BAF
LD6-A, HLD6-A
2, 3
200–600
15–60
LXD6-A, HLXD6-A
2, 3
450–600
ED2
1, 2, 3
15–100
MD6, MXD6,
HMD6, HMXD6
2, 3
500–800
HED4, ED4
1
15–100
ED4, ED6,
HED4, HED6
2, 3
500–1200
2, 3
15–125
ND6, NXD6, SND6,
HND6, HNXD6
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
MD6, HMD6,
HMXD6, MXD6,
SHMD6, SMD6
2, 3
500–800
ND6, HND6,
SHND6, NXD6,
HNXD6, SND6
2, 3
500–1200
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
JXD2-A, JD6-A,
JXD6-A, HJD6-A,
HJXD6-A
2, 3
200–400
QJ2H, QJH2, QJ2
2, 3
QPPH, QPP
2
200,000
60–225
CND6-A
SCND6
JXD2-A, JD6-A,
JXD6-A, HJD6-A,
1200 (2 & 3P) HJXD6-A
1200 (3P)
125–225
QT
1, 2
15–40
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
QPH, BQH, BLH,
HQP, HBQ, HBL
2
3
ED4, ED6
2, 3
15–125
FD6-A, FXDG-A,
HFD6, HFXD6
2, 3
70–250
JXD2-A, JD6-A,
JXD6-A, HJD6-A,
HJXD6-A
2, 3
200–400
QT
1, 2
15–30
100–125
–100
CPD6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1600 (3P)
LD6-A, HLD6-A
2, 3
200–600
LXD6-A, HLXD6-A
2, 3
450–600
MD6, MXD6,
HMD6, HMXD6
2, 3
500–800
ND6, NXD6, SND6,
HND6, HNXD6
2, 3
500–1200
Sentron® Molded Case Circuit Breakers
Series Connected Short Circuit Ratings
General
480V Series Ratings
480V Series Ratings (Continued)
UL Series Main Breaker
Connected
Type
Rating
Maximum
Amperes
Type
Number
of Poles
18,000
ED4
125 (2 & 3P)
BQD, CQD
1, 2, 3
15–100
25,000
ED6
125 (2 & 3P)
BQD, CQD
1, 2, 3
15–100
BQD, CQD
1, 2, 3
15–100
ED4
1
15–100
ED4, ED6
2, 3
15–125
BQD, CQD
1, 2, 3
15–100
30,000
42,000
HED6
HED4
Branch Breaker
125 (2 & 3P)
125 (2 & 3P)
HJD6-A, HJXD6-A,
HLD6-A,
600 (2 & 3P)
HLXD6-A
MD6, MXD6,
ND6, NXD6
SMD6, SND6,
1200 (2 & 3P)
1600 (3P)
SPD6
50,000
ED4
1
15–100
ED4, ED6
2, 3
15–125
HED4
2, 3
15–50
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
SJD6-A
2, 3
200–400
HJD6-A,
HJXD6-A
HLD6-A,
HLXD6-A
250 (2 & 3P)
HMD6, HMXD6
HND6, HNXD6
햲
2, 3
70–250
JD6-A, JXD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
1
2, 3
15–100
15–30
1
15–100
BQD, CQD
햲
ED4, ED6,
HHJXD6, HHJD6,
HHLD6,
600 (2 & 3P) HED4
HHLXD6
HFD6, HFXD6
100,000
CMD6
800 (3P)
Amperes
2, 3
70–250
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
JD6-A, HJD6-A,
JXD6-A, HJXD6-A
2, 3
200–400
LD6-A, HLD6-A
2, 3
200–600
2, 3
450–600
2, 3
200–600
2, 3
450–600
500–800
3
400–600
MD6, MXD6,
HMD6, HMXD6
2, 3
SLD6-A
JD6-A, JXD6-A
2, 3
200–400
HFD6, HFXD6
2, 3
70–250
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
JD6-A, HJD6-A,
JXD6-A, HJXD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
400–600
2, 3
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
400–600
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
400–600
BQD, CQD
1, 2, 3
15–100
ED4, HED4
1
15–100
ED4, ED6,
HED4
2, 3
15–125
HED4, ED4
1
15–100
2, 3
70–250
200–400
ED4, HED4
1
15–100
FD6-A, FXD6-A
2, 3
70–250
600 (2 & 3P) JD6-A, JXD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
FD6-A, FXD6-A
2, 3
70–250
CPD6
CJD6-A
150,000
1200 (3P)
1200 (3P)
1600 (3P)
400 (2 & 3P)
LD6-A, HLD6-A
2, 3
200–600
LXD6-A, HLXD6-A
2, 3
450–600
MD6, MXD6,
HMD6, HMXD6
2, 3
500–800
ND6, NXD6,
HND6, HNXD6
2, 3
500–1200
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
ED4
1
15–100
HFD6, HFXD6
2, 3
70–250
JD6-A, HJD6-A,
JXD6-A, HJXD6-A
2, 3
200–400
ED4
1
15–100
HFD6, HFXD6
2, 3
70–250
2, 3
200–400
JD6-A, HJD6-A,
600 (2 & 3P)
JXD6-A, HJXD6-A
LD6-A, HLD6-A
2, 3
200–600
LXD6-A, HLXD6-A
2, 3
450–600
1
2, 3
15–100
20–30
BQD, CQD
CED6
200,000
햲
125 (2 & 3P) ED4, HED4
1
15–100
ED4, ED6,
HED4
2, 3
15–125
BQD, CQD
1
2, 3
15–100
20–30
2,3
15–50
1
15–100
HED4
2, 3
15–125
FD6-A, FXD6-A,
HFD6, HFXD6
2, 3
70–250
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-149
JD6-A, JXD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A
2, 3
200–400
2, 3
200–600
2, 3
450–600
MD6, MXD6, SMD6 2, 3
500–800
14–1600 (3P) FD6-A, FXD6-A
CND6
CLD6-A
2, 3
1200 (2 & 3P) LD6-A
SCMD, SCND6
70–250
JD6-A, JXD6-A,
SJD6-A
LXD6-A
HPD6, HPXD6
250 (2 & 3P)
FD6-A, FXD6-A
LD6-A
JD6-A, JXD6-A
800 (2 & 3P)
CFD6
18–2000 (3P)
Number
of Poles
LXD6-A
400 (2 & 3P) FD6-A, FXD6-A
65,000
65,000
HRD6, HRXD6
(Continued)
Type
2, 3
CFD6
ED4, ED6
250 (2 & 3P) ED4, HED4
70–250
BQD & CQD breakers (2, 3P) are series rated
from 15–100A for Series 7A, S2, S3, and P1
panelboard applications only.
MOLDED CASE
CIRCUIT BREAKERS
HFD6, HFXD6
18–2000 (3P)
Type
Branch Breaker
Maximum
Amperes
6
RD6, RXD6
1600 (3P)
Main Breaker
LXD6-A, HLXD6-A
14–1600 (3P) FD6-A, FXD6-A
PD6, PXD6
Amperes
UL Series
Connected
Rating
Sentron® Molded Case Circuit Breakers
Series Connected Short Circuit Ratings
General
240 Volt Fuse Series Ratings
Main Breaker
UL Series
Connected
Maximum
Rating
Type Amperes
65,000
J, R
T
15–600 (1, 2, 3P)
15–1200 (1, 2, 3P)
L
601–6000 (1, 2, 3P)
T
(300V)
15–200 (1, 2, 3P)
15–600 (1, 2, 3P)
6
MOLDED CASE
CIRCUIT BREAKERS
T
QPH, BQH, BLH
QPH, BQH, BLH
1, 2, 3
1, 2, 3
QPH, BQH, BLH
1, 2, 3
15–125
QP, BQ, BL
1, 2, 3
15–125
HQP, HBQ, HBL,
QPH, BQH, BLH
3
15–100
T
200,000
2, 3
70–250
70–250
MD6, MXD6,
HMD6, HMXD6
2, 3
500–800
ND6, NXD6,
HND6, HNXD6
2, 3
500–1200
Type
Number
of Poles
Amperes
60–400 (1, 2, 3P)
ED4
1
60–100
15–400 (2, 3P)
ED4
2, 3
15–100
J
15–400 (1, 2, 3P)
ED4
1
15–50
T, J
70–600 (2, 3P)
FD6-A, FXD6-A
2, 3
70–250
J, R
70–600 (2, 3P)
HFD6, HFXD6
2, 3
70–250
JD6-A, JXD6-A
HJD6-A, HJXD6-A
2, 3
200–400
LD6-A, HLD6-A
2, 3
200–600
LXD6-A, HLXD6-A
2, 3
450–600
601–6000 (2, 3P)
QEH, BLEH, QE, QPF,
QPHF, BLHF, BLE, BLF, 2
QAFH, BAFH, QAF, BAF
15–60
Main Breaker
UL Series
Maximum
Connected
Rating
Type Amperes
QT
1, 2
15–50
QPH, BQH, BLH,
HQP, HBQ, HBL
1, 2
15–125
ED4, ED6,
HED4
2, 3
15–125
70–600 (2, 3P)
FD6-A, FXD6-A
2, 3
70–250
200–600 (2, 3P)
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
J
T, J,
R
200–600 (2, 3P)
T
70–1200 (2, 3P)
450–600 (2, 3P)
HFD6, HFXD6
2, 3
70–250
2, 3
200–400
LD6-A, HLD6-A
2, 3
200–600
LXD6-A, HLXD6-A
2, 3
450–600
15–125
HFD6, HFXD6
2, 3
70–250
2, 3
70–250
2, 3
500–800
LXD6-A
2, 3
450–600
MD6, MXD6,
HMD6, HMXD6
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
ND6, NXD6,
HND6, HNXD6
2, 3
500–1200
LD6-A
2, 3
200–600
BQD, CQD
1
SLD6-A
3
300–600
BQD, CQD 햲
2, 3
20–30
ED4, HED4
1
15–100
BQD, CQD
1
15–100
ED4, ED6,
HED4
BQD, CQD 햲
2, 3
20–30
2, 3
15–125
2, 3
200–600
SLD6-A
3
300–600
450–600 (2, 3P)
LXD6-A
2, 3
450–600
15–1200 (2, 3P)
ED4, HED4
1
15–100
ED4, ED6,
HED4
2, 3
70–1200 (2, 3P)
FXD6-A, FD6-A
450–1200 (2, 3P)
200–1200 (2, 3P)
FD6-A, FXD6-A
2, 3
70–250
JD6-A, JXD6-A,
JXD2-A, SJD6-A
2, 3
200–400
LD6-A
2, 3
200–600
LXD6-A
2, 3
450–600
SLD6-A
3
300–600
SMD6
3
500–800
SND6
3
500–1200
PD6, PXD6, SPD6
3
1200–1600
1600–2000
RD6, RXD6
3
125–200 (2, 3P)
QJH2, QJ2H, QJ2
2, 3
125–200
T, J
125–600 (2, 3P)
QJH2, QJ2H
2, 3
125–225
125–400 (2, 3P)
QJ2
2, 3
125–225
70–600 (2, 3P)
HFD6, HFXD6
2, 3
70–250
T, L
L
R
601–1200 (2, 3P)
601–6000 (2, 3P)
15–100 (1, 2, 3P)
200,000
T, J
15–200 (1, 2, 3P)
BQD & CQD breakers are series rated from 15–100A for
Series 7A, S2, S3, and P1 panelboard applications only.
6-150
Branch Breaker
JD6-A, JXD6-A
HJD6-A, HJXD6-A
LD6-A
300–600 (3P)
100,000
Number
of Poles Amperes
2, 3
480 Volt Fuse Series Ratings
15–100
Type
HFD6, HFXD6
15–30
50,000
Branch Breaker
HFD6, HFXD6
L
70–1200 (2, 3P)
QPF, BQF, BLF, QPHF,
QE, BE, BLE, QEH,
1
BLEH, BLHF, BQHF,
QAFH, BAFH, QAF, BAF
R
J, R
Main Breaker
UL Series
Connected
Maximum
Rating
Type Amperes
15–125
15–125
1
601–6000 (2, 3P)
200,000
햲
Type
Number
of Poles Amperes
ED4, HED4
300–1200 (3P)
L
Branch Breaker
15–600 (2, 3P)
J, R
100,000
240 Volt Series Ratings (Continued)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15–100
Molded Case Circuit Breakers
Unusual Operating Conditions
Reference
Note: The information provided on this and the next page is intended for reference and recommendation only. Because several
variables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing,
than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.
Table 1 — Temperature Derating Data for Thermal-Magnetic Breakers
Ampere Rating at:
25° C
50° C
(77° F)
(122° F)
0017
0013
0022
0018
0028
0023
0033
0028
0039
0030
0044
0037
0055
0046
0066
0056
0077
0065
0099
0084
0110
0094
0137
0114
0165
0136
0192
0159
0220
0182
0247
0205
0275
0235
0330
0276
0385
0325
0440
0372
0550
0468
0660
0564
0770
0658
0880
0754
0990
0828
1100
0900
1320
1090
1540
1304
1760
1500
1980
1690
2200
1880
60° C
(140° F)
0011
0016
0021
0026
0025
0034
0042
0052
0060
0078
0087
0100
0120
0140
0160
0180
0220
0252
0301
0340
0435
0525
0613
0704
0749
0825
1000
1148
1320
1485
1650
Siemens Breaker Frames
BQ,
BL,
BQD,
CQD,
NGG,
NGB,
ED
QJ
FD
JD
LD
MD
ND
PD
RD
Altitude in Feet (Meters)
13,000 (4,000)
12,000 (3,675)
11,000 (3,350)
10,000 (3,000)
9,000 (2,750)
8,000 (2,400)
7,000 (2,100)
6,000 (1,800)
1.0
.95
.90
.85
.80
.75
Rating Correction Factor
Figure 1 — Altitude Adjustment
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-151
MOLDED CASE
CIRCUIT BREAKERS
Reference
Ampere
Rating at
40° C (104° F)
0015
0020
0025
0030
0035
0040
0050
0060
0070
0090
0100
0125
0150
0175
0200
0225
0250
0300
0350
0400
0500
0600
0700
0800
0900
1000
1200
1400
1600
1800
2000
6
High Ambient Temperatures
Because thermal-magnetic trip breakers
are temperature sensitive and calibrated
for a specific ambient of 40° C (104° F)
(average enclosure temperature), a
higher ambient will cause the breaker to
trip at lower current than its nameplate
rating, in other words, causing the
breaker to “derate” (see Table 1).
Similarly, the current carrying capacity
of a circuit conductor is based upon a
certain ambient temperature, a higher
ambient will reduce its current carrying
capacity, causing it to “derate.” Thus,
with a fluctuating temperature, a
thermal-magnetic breaker will derate
nearly parallel with its connected circuit
conductors and maintain close circuit
protection. If the application temperature
exceeds 40° C (104° F) and is known,
either a breaker specially calibrated for
the higher ambient or one oversized
according to Table 1 may be selected.
In a case such as this, the circuit
conductors should be oversized as well.
Siemens Sensitrip® III and Type SB
Encased Systems Breakers are
insensitive to temperature changes.
However, they do include circuitry to
protect the components from
abnormally high temperatures.
Moisture — Corrosion
For atmospheres having high moisture
content and / or where fungus growth is
prevalent, a special preventive treatment
may be required.
Where the air is heavily laden with
corrosive elements, breakers made
with special corrosion-resistant
finishes may be required.
Altitude
Reduced air density at altitudes greater
than 6600 ft. (2000 meters) affects the
ability of a molded case circuit breaker
to transfer heat and interrupt faults.
Therefore, circuit breakers applied at
these altitudes should have interrupting,
insulation and continuous currents
derated as indicated in Figure 1.
Molded Case Circuit Breakers
Unusual Operating Conditions
400 Hz
Reference
Systems 햲
Siemens molded case circuit breakers
can be applied for overcurrent protection
on 400Hz systems, commonly used to
power computer installations, aircraft,
military and other specialty equipment.
Below are basic guidelines.
Circuit Breaker Derating Required
This table lists the maximum continuous
current carrying capacity for Siemens
breakers at 400Hz. Due to the increased
resistance of the copper sections
resulting from the skin effect produced
by eddy currents at these frequencies,
circuit breakers in many cases require
derating. The thermal derating on these
devices is based upon 100%,
three phase application in open air in a
maximum of 40° C (104° F) with 48 in.
(1219 mm) of the specified cable or bus
at the line and load side. Additional
derating of not less than 20% will be
required if the circuit breaker is to be
utilized in an enclosure. Further derating
may be required if the enclosure
ambient temperature exceeds 40° C
(104° F).
Cable and Bus Sizing
The cable and bus sizes to be utilized
at 400Hz are not based on standard
National Electric Codes tables for 60Hz
application. Larger cross sections are
necessary at 400Hz. All bus bars
specified are based upon mounting
the bars in the vertical plane to allow
maximum air flow. All bus bars are
spaced at a minimum of 0.25 in. (6 mm)
apart. Mounting of bus bars in the
horizontal plane will necessitate
additional drafting. Edgewise orientation
of the bus may change the maximum
ratings indicated. If additional information
is required for other connections of cable
or bus, contact Siemens for information.
Application Recommendations
It is recommended that temperatures be
measured on the line and load terminals
or T-connectors of the center pole. These
are usually the hottest terminals with a
balanced load. A maximum temperature
of 75° C (35° C over a maximum ambient
of 40° C) would verify the particular
application. Temperature profiles taken
on these breakers can be correlated to
ensure that the hottest points within
the breaker are within the required
temperature limits.
Factory Configuration
When required, molded case circuit
breakers may be factory calibrated for
400Hz application. These breakers are
specially labeled for 400Hz usage and
their nameplate current rating will
include the necessary derating factory.
The highest “Maximum Continuous
Amperes” rating at 400Hz, found in the
table below approximates the highest
specially calibrated 400Hz nameplate
ampere rating available for a given
frame size. Contact Siemens for
ordering information on other
breakers applied in 400Hz systems.
400Hz Breakers
MOLDED CASE
CIRCUIT BREAKERS
6
Siemens
Breaker
Type
ED2, ED4, ED6,
BQD, HED4,
HED6, CED6
QJ2, QJH2,
QJ2H, HQJ2H
FD6, FXD6,
HFD6, HFXD6,
CFD6
JXD2, JD6,
JXD6, HJD6,
HJXD6, HHJD6,
HHJXD6, CJD6
JD6, JXD6,
HJD6, HJXD6
100% Rated
햲 The
Maximum Continuous Ampere Rating
At 40° C (104° F) 햳
60HZ
400HZ
Enclosed
Open Air
Open Air 햴
After Derating
015
015
012
020
020
016
025
025
020
030
030
024
035
035
028
040
040
032
045
043
034
050
048
038
060
057
046
070
067
054
080
076
061
090
086
069
100
095
076
110
105
084
125
119
095
070
063
050
080
072
058
090
080
064
100
090
072
110
095
075
125
105
084
150
125
100
175
140
112
200
160
128
225
180
144
250
200
160
200
170
136
225
190
152
250
210
168
300
240
192
350
260
208
400
300
240
200
170
170
225
190
190
250
210
210
300
240
240
350
260
260
400
300
300
information provided on this page is intended for
reference and recommendation only. Because several
variables can act on a circuit breaker’s performance at
the same time, the data above is based less on
6-152
75° C (167° F)
Copper
Cable per Pole
No of
Wire
Pieces
Size
1
#14
1
#12
1
#10
1
#10
1
#10
1
#8
1
#8
1
#8
1
#6
1
#4
1
#4
1
#3
1
#3
1
#2
1
#1
1
#4
1
#4
1
#3
1
#3
1
#2
1
#1
1
#1/0
1
#2/0
1
#3/0
1
#4/0
1
250 kcmil
1
#3/0
1
#4/0
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#3/0
2
#3/0
2
#4/0
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#3/0
Siemens
Breaker
Type
LD6, LXD6,
HLD6, HLXD6,
HHLD6,
HHLXD6,
CLD6
LD6, LXD6,
HLD6, HLXD6,
100% Rated
MD6, MXD6,
HMD6,
HMXD6, CMD6
MD6, MXD6,
HMD6,
HMXD6, CMD6
100% Rated
ND6, NXD6
HND6, HNXD6,
CND6
ND6, NXD6
HND6, HNXD6,
CND6
100% Rated
PD6, PXD6,
HPD6, HPXD6,
CPD6,
PD6, PXD6,
HPD6, HPXD6,
CPD6
100% Rated
RD6, RXD6,
HRD6, HRXD6
80% Rated
Maximum Continuous Ampere Rating
At 40° C (104° F) 햳
60HZ
400/415HZ
Enclosed
Open Air
Open Air 햴
After Derating
0250
0210
168
0300
0240
192
0350
0260
208
0400
0300
240
0450
0340
272
0500
0375
300
0600
0420
336
0250
0210
210
0300
0240
240
0350
0260
260
0400
0300
300
0450
0340
340
0500
0375
375
0600
0420
420
0500
0400
320
0600
0430
360
0700
0500
400
0800
0560
448
0500
0400
400
0600
0430
430
0700
0500
500
0800
0560
560
0800
0560
448
0900
0600
480
1000
0650
520
1200
0780
624
0900
0600
600
1000
0650
650
1200
0780
780
1200
0780
624
1400
0850
680
1600
0960
768
1200
0780
780
1400
0850
850
1600
0960
960
1600
0960
768
1800
1080
864
2000
1200
960
controlled testing, than on experience and engineering
judgment. Contact Siemens for further information on
special conditions and treatment.
햳 Additional derating may be required if the ambient
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
75° C (167° F)
Copper
Cable per Pole
No of
Wire
Pieces
Size
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#3/0
2
#4/0
2
250 kcmil
2
350 kcmil
1
250 kcmil
1
350 kcmil
1
500 kcmil
2
#3/0
2
#4/0
2
250 kcmil
2
350 kcmil
2
250 kcmil
2
350 kcmil
3
250 kcmil
3
300 kcmil
2
250 kcmil
2
350 kcmil
3
250 kcmil
3
300 kcmil
3
300 kcmil
3
350 kcmil
3
400 kcmil
4
350 kcmil
3
350 kcmil
3
400 kcmil
4
350 kcmil
4
400 kcmil
4
500 kcmil
5
500 kcmil
4
400 kcmil
4
500 kcmil
5
500 kcmil
5
500 kcmil
5
500 kcmil
6
500 kcmil
temperature is greater than 40°C (104°F).
after derating to compensate for the heating
of the copper conductor, caused by the skin effect
generated by eddy currents produced at 400/415HZ.
햴 Calculated
Molded Case Circuit Breakers
IEC 947-2® AC Interrupting Ratings, 50/60 HZ KA
70-250
FD
250-400
JD
400-600
LD
600-800
LMD
600-800
MD
800-1200
ND
1200-1600
PD
1600-2000
RD
Breaker
Type
ED6
FXD6
FD6
HFD6
HFXD6
HHFD6
HHFXD6
JXD6(A)
JD6(A)
HJD6(A)
HJXD6(A)
HHJD6
HHJXD6
CJD6
SJD6(A)햳
SHJD6(A)햳
SCJD6
LXD6(A)
LD6(A)
HLD6(A)
HLXD6(A)
HHLD6(A)
HHLXD6
CLD6
SLD6(A) 햳
SHLD6(A) 햳
SCLD6 햳
LMXD6
LMD6
HLMXD6
HLMD6
MXD6
MD6
HMXD6
HMD6
CMD6
SMD6햳
SHMD6햳
SCMD6햳
NXD6
ND6
HNXD6
HND6
CND6
SND6
SHND6
SCND6
PXD6
PD6
HPXD6
HPD6
CPD6
SPD6
SHPD6
RXD6
RD6
HRXD6
HRD6
220/240 Volts
Icu
65
65
65
100
100
200
200
65
65
100
100
200
200
—
65
100
—
65
65
100
100
200
200
—
65
100
—
65
65
100
100
65
65
100
100
200
65
100
200
65
65
100
100
200
65
100
200
65
65
100
100
200
—
—
65
65
100
100
380/415 Volts
Ics
17
33
33
50
50
100
100
33
33
50
50
100
100
—
33
50
—
33
33
50
50
100
100
—
33
50
—
33
33
50
50
33
33
50
50
100
33
50
100
33
33
50
50
100
33
50
100
33
33
50
50
100
—
—
33
33
50
50
Icu
35
35
35
65
65
100
100
40
40
65
65
100
100
—
40
65
—
40
40
65
65
100
100
—
40
65
—
40
40
65
65
40
40
65
65
100
40
65
100
40
40
65
65
100
40
65
200
40
40
65
65
100
—
—
40
40
65
65
500 Volts
Ics
9
18
18
33
33
50
50
20
20
33
33
50
50
—
20
33
—
20
20
33
33
50
50
—
20
33
—
20
20
33
33
20
20
33
33
50
20
33
50
20
20
33
33
50
20
33
50
10
10
17
17
25
—
—
10
10
17
17
Icu
18
20
20
42
42
65
65
30
30
42
42
65
65
—
30
42
—
30
30
42
42
65
65
—
30
42
—
30
30
42
42
30
30
42
42
65
30
42
65
30
30
42
42
65
30
42
65
30
30
42
42
65
—
—
30
30
42
42
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Ics
5
10
10
21
21
33
33
15
15
21
21
33 b
33 b
—
15
21
—
15
15
21
21
33 b
33 b
—
15
21
—
15
15
21
21
15
15
21
21
33
15
21
33
15
15
21
21
33
15
21
33
8
8
11
11
17
—
—
8
8
11
11
MOLDED CASE
CIRCUIT BREAKERS
Breaker
Frame
ED
6
Ampere
Rating
15-125
Reference
6-153
Molded Case Circuit Breakers
Typical Specifications
Reference
General Specifications
Molded case circuit breakers shall provide circuit overcurrent protection with
inverse time and instantaneous tripping characteristics and shall be Siemens
Sentron, Sensitrip or approved equal.
All circuit breakers shall be listed by Underwriters’ Laboratories, Inc., conform
to applicable requirements of NEMA Standard Publication No. AB1 and meet
appropriate classifications of Federal Specifications W C 375B/Gen.
All circuit breakers shall have a quick-make, quick-break over center toggle type
mechanism and the handle mechanism shall be trip free to prevent holding contacts
closed against a short circuit or sustained overload. All circuit breaker handles shall
assume a position between “ON” and “OFF when tripped automatically. Multi-pole
circuit breakers shall be common-trip such that an overload or short circuit on any
one pole will result in all poles opening simultaneously. Arc extinction is to be
accomplished by magnetic arc chutes. All ratings are to be clearly visible. When
reverse feed is indicated on the drawings, in accordance with UL, circuit breakers
with sealed trip units shall be supplied.
MOLDED CASE
CIRCUIT BREAKERS
6
Thermal Magnetic Specifications
Unless otherwise noted on the drawings, all Circuit breakers 2000 Ampere
and below shall have thermal-magnetic trip units, with inverse time-current
characteristics. Automatic operation of these circuit breakers shall be obtained by
means of thermal-magnetic tripping devices located in each pole providing inverse
time delay and instantaneous circuit protection. Circuit breakers shall be ambient
compensating in that, as the ambient temperature increases over 40°C, the circuit
breaker automatically derates itself so as to better protect its associated conductor.
Thermal magnetic breakers from 250 to 2000A frames shall have thermal
interchangeable trip units, with instantaneous magnetic trip settings that are
adjustable and accessible from the front of all circuit breakers on frame sizes 250
Amperes and above. Where indicated, provide circuit breakers UL listed for
application at 100% of their continuous ampere rating in their intended enclosure.
Motor Circuit Protectors
Where indicated on the drawings and in the combination motor starter/motor
control center schedule, furnish instantaneous magnetic trip only circuit breakers
for motor short circuit protection. The magnetic trips shall be adjustable and
accessible from the front of all circuit breakers frames. The continuous current
rating shall be between 1 and 800 Amperes as indicated on the drawing.
Solid State Sensing Specifications
As indicated on the drawings, circuit breaker frames
400 Ampere through 3200-Ampere shall have
microprocessor-based RMS sensing trip units, with
the capability to measure through to the 21st harmonic.
Automatic operation of all circuit breaker frames 400A
and larger shall be obtained by means of solid state
tripping elements providing inverse time delay and
(instantaneous) and/or (short-time delay) circuit
protection. Continuous current ratings shall be adjustable
from 20% to 100% of the trip unit rating, without the need
for a rating plug. Long-time delay and instantaneous trip
shall be adjustable. The optional short-time trip function
shall have adjustable pick-up settings, three fixed times,
and I2t ramp. Circuit breaker frames 400A and larger, and
where indicated on the drawings, shall be 100% equipment rated.
Integral Ground
Fault Option
Main and feeder circuit breakers, as indicated on the
drawings, shall be provided with integral ground fault
protection. Ground fault pick-up shall be adjustable from
20% to 70% of the circuit breakers maximum continuous
current rating. Ground fault time delay shall be adjustable
with three 12t ramps.
Metering Option
When indicated on the drawings, solid state trip breakers
shall be furnished with a plug-in or panel mounted
metering device. This device shall simultaneously display
all three phase currents, as well as average current,
ground current, and phase unbalance. In addition it shall
display breaker status, a max log, and a trip log. The trip
log will retain and display date, time and type of trip
(overload, short circuit or ground fault) for the most
recent 5 trip events.
Current Limiting Specifications
The interrupting rating of the circuit breakers shall be as indicated in the
specifications, and shown on the drawing or single line diagram. The interrupting
rating of the circuit breakers shall be at least equal to the available short circuit
current at the line terminals of the circuit breaker and correspond to the UL listed
integrated short circuit current rating specified.
Internal Accessories
Provide shunt trips, bell alarms, and auxiliary switches as shown on the contract
drawings. Gold plated auxiliary switches shall be supplied for PLC connection. Internal
accessories for all breakers shall be UL listed for field installation and modification.
Where indicated on the drawings, Siemens current
limiting circuit breakers are to be furnished. Current
limiting circuit breakers shall limit the let-through I2t to a
value less than the I2t of one-half cycle wave of the
symmetrical prospective current without any fusible
elements when operating within its current range.
Series Connected Combination Specifications
Where protective devices are applied in series combination,
such that the prospective available fault current exceeds
the interrupting rating (AIR) of the downstream protective
devices, such combinations shall be UL recognized
combinations. All electrical equipment using these UL
recognized circuit breaker combinations shall be clearly
marked in accordance with NEC Section 240-83(c).
Connection Accessories
Unless otherwise noted, Mechanical lugs shall be provided with all Molded Case
Breakers. Where indicated on the drawings, compression lugs shall be provided on
1200 Ampere frame and below circuit breakers. All compression lugs shall be
supplied by the Circuit Breaker Manufacturer. Where indicated on the drawings,
UL listed plug-in or rear connectors shall be supplied.
6-154
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Molded Case Circuit Breakers
Superseded Breakers
General
Sentron Series
Note
Superseded
Note
Superseded
CED62B015-CED62B125
CED62S100A
CED63A001-CED63A125
CED63B015-CED63B125
CED63S100A
HHED62B015-HHED62B125
HHED63B015-HHED63B125
햲
CLE62B015-CLE62B100
CLE62S100
CLE63A001-CLE63A125
CLE63B015-CLE63B100
CLE63S100
HED62B015-HED62B125
HED63B015-HED63B125
햴
CE2B015-CE2B100
CE2S100
CFD62A150, CFD62L150, CFD62A250
CFD62B070-CFD62B250
CFD62S250A
CFD63A150, CFD63L150, CFD63A250
CFD63B070-CFD63B250
CFD63S250A
햲
CJD62B200-CJD62B400
CJD62H400, CJD62L400
CJD62S400A
CJD63B200-CJD63B400
CJD63H400, CJD63L400
CJD63S400A
햲
CPD63B120-CPD63B160
햶
CP3B120-CP3B160
ED21B015-ED21B100
ED22B015-ED22B100
ED22S100A
ED23B015-ED23B100
ED23S100A
햲
ED41B015-ED41B100
ED42B015-ED42B125
ED42S100A
ED43B015-ED43B125
ED43S100A
햲
ED61B015-ED61B100
ED62B015-ED62B125
ED62S100A
ED63A001-ED63A125
ED63B015-ED63B125
ED63S100A
HHED62B015-HHED62B125
HHED63B015-HHED63B125
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햴
CE3B015-CEB100
CE3S100
햴
CJ2B125-CJ2B250
햴
CJ3B125-CJ3B250
햵
CJ2B300-CJ2B400
햵
CJ2S400
CJ3B300-CJ3B400
햵
햵
CJ3S400
E21B015-E21B100
E22B015-E22B100
E22S100A
E23B015-E23B100
E23S100A
햳
EE1B015-EE1B100
EE2B015-EE2B100
EE2S100
EE3B015-EE3B100
EE3S100
E41B015-E41B100
E42B015-E42B100
E42S100
E43B015-E43B100
E43S100
햳
E61B015-E61B100
E62B015-E62B100
E62S100A
E63A001-E63A125
E63B015-E63B100
E63S100A
HED62B015-HED62B125
HED63B015-HED63B125
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
EH1B015-EH1B100
EH2B015-ED2B125
EH2S100
EH3B015-EH3B100
EH3S100
EF1B015-EF1B020
EF2B015-EF2B100
EF2S100
EF3A003, EF3J050, EF3L050-EF3A100, EF3H1
EF3B015-EF3B100
EF3S100
FD62B070-FD62B250
FD63B070-FD63B250 햷
햲
FXD62A150, FXD62L150, FXD62A250
FXD62B070-FXD62B250 햷
FXD62S250A
FXD63A150, FXD63L150, FXD63A250
FXD63B070-FXD63B250 햷
FXD63S250A
햲
HED41B015-HED41B100
HED42B015-HED42B125
HED43B015-HED43B125
햲
HED61B015-HED61B100
HED62B015-HED62B125
HED63B015-HED63B125
햲
HFD62B070-HFD62B250
HFD63B070-HFD63B250
햲
HHED62B015-HHED62B125
HHED63B015-HHED63B125
햲
HJD63B200-HJD63B400
햲
HJ63B200-HJ63B400
햳
HJ3B125-HJ3B400
HLD63B250-HLD63B600
햲
HL63B450-HL63B600
햳
HL3B450-HL3B600
HMD63B500-HMD63B800
햳
HN3B500-HN3B800
HND63B100-HND63B120
햳
HK3B100-HK3B120
HPD63B120-HPD63B160
햳
HP3B120-HP3B160
HRD63B160-HRD63B200
햳
HR3B160-HR3B200
햲 Mechanically
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
and electrically interchangeable.
interchangeable only, refer to sales office for
further details.
햴 Electrically interchangeable only if the system interrupting
capacity is less than or equal to:
200 kA at 240V AC
200 kA at 480V AC
100 kA at 600V AC
햳 Electrically
MOLDED CASE
CIRCUIT BREAKERS
햲
CLJ62B100-CLJ62B400
CLJ62L400, CLJ62H400
CLJ62S400
CLJ63B200-CLJ63B400
CLJ63L400, CLJ63H400
CLJ63S400
햴
F62B070, F62B250
F63B070-F63B250
FJ62A150, FJ62L150-FJ62A250
FJ62B070-FJ62B250
FJ62S250
FJ63A150, FJ63L150-FJ63A250
FJ63B070-FJ63B250
FJ63S250
햳
햳
햳
햳
햳
FJ2B070-FJ2B225
FJ2S225
FJ3A225
FJ3B070-FJ3B225
FJ3S225
HE41B015-HE41B100
HE42B015-HE42B100
HE43B015-HE43B100
HE61B015-HE61B100
HE62B015-HE62B110
HE63B015-HE63B100
햳
햳
HE2B015-HE2B100
HE3B015-HE3B100
HF62B070-HF62B250
HF63B070-HF63B250
HED62B015-HED62B125
HED63B015-HED63B125
햵 Electrically
interchangeable only if the system interrupting
capacity is less than or equal to:
200 kA at 240V AC
150 kA at 480V AC
100 kA at 600V AC
햶 Refer to local sales office for replacement information.
햷 Effective
1994 — The FD6 and FXD6 types have been
replaced by FD6-A and FXD6-A type thermal / magnetic
circuit breakers — mechanically and electrically
interchangeable with the exception that FXD6-A and FD6-A
have 22kA at 600V AC ratings versus 18kA at 600V AC for
types FXD6 and FD6.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6
햷
햲
CLF62A150, CLF62A250
CLF62B070-CLF62B240
CLF62S250
CLF63A150, CLF63A250
CLF63B070-CLF63B250
CLF63S250
햴
6-155
Molded Case Circuit Breakers
MOLDED CASE
CIRCUIT BREAKERS
6
Superseded Breakers
General
Sentron Series
Note
Superseded
Note
Superseded
JD62B200-JD62B400
JD63B200-JD63B400
햲
JLB200-JL62B400
JL63B200-JL63B400
햳
JL2B070-JL2B400
JL3B0L0-JL3B400
JXD22B200-JXD22B400
JXD22S400A
JXD23B200-JXD23B400
JXD23S400A
햲
JD22B200-JD22B400
JD22S400
JD23B200-JD23B400
JD23S400
햳
JXD62B200-JXD62B400
JXD62H400, JXD62L400
JXD62S400A
JXD63B200-JXD63B400
JXD63H400, JXD63L400
JXD63S400A
햲
JJ62B200-JJ62B400
JL62L400, JL62H400
JJ62S400A
JJ63B200-JJ63B400
JL63A400, JL63H400, JL63L400
JJ63S400A
햳
LD62B250-LD62B500
LD62B250-LD63B600
햲
LL63B250-LL62B600
LL63B250-LL63B600
햳
LXD62B450-LXD62B600
LXD62J600, LXD62L600
LXD62S600A
LXD63B450-LXD63B600
LXD64H600, LXD63L600
LXD63S600A
햲
MD62B500-MD62B800
MD63B500-MD63B800
햳
MXD62A800, MXD62H800, MXD62L800
MXD62S800A
MXD63A800, MXD63H800, MXD63L800
MXD63S800A
햳
ND63B100-ND63B900
NXD63S120A
햳
PD63B120-PD63B160
PXD63S160A
햳
RD63B160-RD63B200
햳
HR3B160-HR3B200
QJ22B060-QJ22B225
QJ22B060H-QJ22B225H
QJ22S225
QJ23B060-QJ23B225
QJ23B060H-QJ23B225H
햲
QJ2B125-QJ2B225
햲
QJS225
QJ3B125-QJ3B225
QJH22B060-QJH22B225
QJH23B060-QJH23B225
QJH23S225
햲
RD63B160-RD63B200
RXD63S200A
햳
SHJD69200-SHJD69400
SHJD69200G-SHJD69400G
SHJD69200NGT-SHJD69400NGT
SHJD69200NT-SHJD69400NT
햲
SHLD69300-SHLD69600
SHLD69300G-SHLD69600G
SHLD69300NGT-SHLD69600NG
SHLD69300NT-SHLD69600NT
햲
SHND69100A-SHND69120A
SHND69100AG-SHND69120AG
햲
SHPD69120-SHPD69160
SHPD69120G-SHPD69160G
햳
햲 Mechanically
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햳
햲
햲
햲
햲
햳
햳
햳
햳
햳
햳
햲
햲
햲
햳
햲
햲
햲
햲
햲
햲
햲
햳
and electrically interchangeable.
interchangeable only, refer to sales office for
further details.
햳 Electrically
6-156
LJ62B450-LJ62B600
LL2H600, LL2U600, LL2X600
LJ62S600
LJ63B450-LJ63B600
LL63H600, LL63L600
LJ63S600A
햳
햳
햳
햳
햳
햳
햳
햳
햳
햳
JD2B250-JD2B400
JD2S400
JD3B250-JD3B400
JD3S400
JJ2B250-JJ2B400
JL2L400-JL2H400
JJ3B200-JJ3B400
JL3H400, JL3L400, JL3A225
LL2B450-LL2B600
LL3B450-LL3B600
LL3A450, LL3H600
LL3S600
KM2B500-KM2B800
KM3B500-KM3B800
KM2A800, KM2H800, KM2L800
KM2S800
KM3A600, KM3H800, KM3L800
KM3S800
KP3B100-KP3B900
KP3S120
HP3B120-HP3B160
HP3S160
QJ2H125-QJ2B225
QJ3H125-QJ3H225
QJ3S225
HR3B160-HR3B200
HR3S200
SHJ63B200-SHJ63B400G
SHJ63B200G-SHJ63B400G
SHJ63N200G-SHJ63N400G
SHJ63N200-SHJ63N400
SHL63B300-SHL63B600
SHL63B300G-SHL63B600G
SHL63N300G-SHL63N600G
SHL63N300-SHL63N600
SHND69100-SHND69800
SHND69100G-SHND69800G
햳
햳
SHKF3B100-SHKF3B800
SHKF3B100G-SHKF3B800G
SHPF3B120-SHPF3B160
SHPF3B120G-SHPF3B160G
햴 Electrically
interchangeable only if the system
interrupting capacity is less than or equal to:
200 kA at 240V AC
200 kA at 480V AC
100 kA at 600V AC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햵 Electrically
interchangeable only if the system
interrupting capacity is less than or equal to:
200 kA at 240V AC
150 kA at 480V AC
100 kA at 600V AC
햶 Refer to local sales office for replacement information.
Molded Case Circuit Breakers
Superseded Breakers
General
Sentron Series
Note
Superseded
Note
Superseded
SHND69100NGT-SHND69800NGT
SHND69100NT-SHND69800NT
햲
SHKF3N100G-SHKF3N800G
SHKF3N100-SHKF3N800
햳
SHK3N100G-SHK3N600G
SHK3N100-SHK3N600
SHPF3B120-SHPF3B160
SHPF3B120G-SHPF3B160G
SHPF3N120-SHPF3N160
SHPF3N120G-SHPF3N160G
햳
SJD69200-SJ369400
SJD69200G-SJD69400G
SJD69200NGT-SJD69400NGT
SJD69200NT-SJD69400NT
햲
SLD69300-SLD69600
SLD69300G-SLD69600G
SLD69300NGT-SLD69600NGT
SLD69300NT-SLD69600NT
햲
SMD69600A-SMD69800A
SMD69600AG-SMD69800AG
SMD69600ANGT-SMD69800ANGT
SMD69600ANT-SMD69800ANT
햲
SND69800A-SND69120A
SND69800AG-SND69120AG
SND69800ANGT-SND69120ANGT
SND69800ANT-SND69120ANT
햲
SPD69120-SPD69160
SPD69120G-SPD69160G
SPD69120NGT-SPD69160NGT
SPD69120NT-SPD69160NT
햳
햳
햳
햳
햳
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햳
햳
햳
SJL63B200-SJL63B400
SJL63B200G-SJL63B400G
SJL63N200G-SJL63N400G
SJL63N200-SJL63N400
SLL63B300-SLL63B600
SLL63B300G-SLL63B600G
SLL63N300G-SLL63N600G
SLL63N300-SLL63N600
SMD69600-SMD69800
SMD69600G-SMD69800G
SMD69600NGT-SMD69800NGT
SMD69600NT-SMD69800NT
햳
SND69100-SND69800
SND69100G-SND69800G
SND69100NGT-SND69800NGT
SND69100NT-SND69800NT
햳
—
—
햵
BQCC1B015-BQC1B030
—
—
—
햵
CC1B015-CC1B030
CC2B015-CC2B030
CC3B015-CC3B030
—
—
햵
—
—
—
—
—
—
햵
—
—
—
—
—
—
햴
햵
햵
햴
햴
햳
햳
햳
햳
SKPF3B100-SKPF3B600
SKPF3B100G-SKPF3B600G
SKPF3N100G-SKPF3N600G
SKPF3N100-SKPF3N600
EF2A003, EF2H050, EF2L050, EF2A100,
EF2H150, EF2L150
EH1B015-EH1B100
EH2B015-EH2B100
EH3B015-EH3B100
HE2A003, HE2H050, HE2L050-HE2A100
HE3A003, HE3H050, HE3L050-HE3A100
HE3B015-HE3B100
MOLDED CASE
CIRCUIT BREAKERS
and electrically interchangeable.
interchangeable only, refer to sales
office for further details.
햴 These units are for replacement purposes only.
Consult sales office for availability.
햳 Electrically
햵
햳
SKMF3B600-SKMF3B800
SKMF3B600G-SKMF3B800G
SKMF3N600G-SKMF3N800G
SKMF3N600-SKMF3N800
6
햲 Mechanically
햵
햳
SHPF3B120-SHPF3B160
SHPF3B120G-SHPF3B160G
SHPF3N120-SHPF3N160G
SHPF3N120G-SHPF3N160G
—
—
—
햵
햳
SHP3B120-SHP3B800
SHP3B120G-SHP3B800G
SHP3N120-SHP3N800
SHP3N120G-SHP3N800G
햵 These
units are no longer manufactured, and no
replacement is available.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-157
MOLDED CASE
CIRCUIT BREAKERS
6
Notes
6-158
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7SPEEDFAX
TM
2007-2008 Transformers
Contents
Features and Technical Information
7-2
Transformer—Dry Type Distribution
7-3 – 7-4
Catalog Coding System
7-5
Single Phase—Distribution Dry Type
7-6 – 7-7
Three Phase—Distribution Dry Type
7-8 – 7-11
Filtered Isolation and Motor Drive
7-12
Sentron Power Centers
7-13
NEMA TP1 – Energy Efficient & Super Energy Efficient Transformers
7-14
Harmonic Mitigation Transformers
Reduced Size Transformers
7-15 – 7-16
7-17
Warehouse Stock
Type QST [Standard Units]
7-18
Buck-Boost Transformers
Type Q Buck-Boost Transformers and Accessories
Buck-Boost Application, Selection Tables
Single Phase, Three Phase Buck-Boost Connection Diagrams
7-19
7-20 – 7-23
7-24
7
TRANSFORMERS
Residential Commercial Industrial
Distribution Dry Type Transformers
600 Volts Class — Single and Three Phase
Selection
600 Volts Class
Single Phase 0.25–167 KVA
Three Phase 3–1000 KVA
Features
▪ Standard units are UL listed and are
designed in accordance with ANSI,
NEMA (ST20) and IEEE standards
TRANSFORMERS
7
Encapsulated
▪ UL listed designs (UL 506)
▪ Totally enclosed, non-ventilated,
heavy gauge steel enclosure
▪ Core and coil completely embedded
within a resin compound for quiet,
low temperature operation
▪ Encapsulation seals out moisture and air
▪ UL listed indoor/outdoor enclosure
features integral wall mounting brackets
▪ Rugged design resists weather, dust,
and corrosion
▪ Efficient, compact, lightweight, easy
to install
▪ Flexible wiring leads that terminate
within the bottom wiring compartment
▪ Large wiring compartment on the
bottom with convenient knockouts
▪ High quality non-aging electrical grade
core steel
▪ Precision wound coils
Ventilated
▪ UL listed designs (UL 1561)
▪ Designed for indoor NEMA 2 installations.
NEMA 3R enclosures suitable for outdoor
locations available as an option
▪ Core and coils are designed with UL
listed high-temperature materials rated
for 220°C; standard units feature 150°C
winding temperature rise
▪ Optional low temperature rise of 115° C
or 80° C winding temperature rise for
increased efficiency and additional
overload capability
▪ Rugged sheet steel enclosure per
UL1561, UL506 standards with
removable panels for access to
the internal wiring area
▪ Neoprene noise dampening pads isolate
the core and coil from the enclosure
▪ Optional drip shields/weathershield
and wall brackets available
▪ High quality, non-aging electrical grade
core steel
▪ Precision wound coils
25KVA
277 -120/240 is 115°C rise. 25KVA 480 x 240
-120/240 is 150°C rise.
Average sound level applies to 150°C rise K-1 transformers.
Average dB levels for low temperature and other K-Factor
ratings available upon request.
NEMA Class for 80°C rise = B, 115°C rise = F, 150°C = H.
Insulation class per UL 1446 180° = (H), 220° = (R)
7-2
Encapsulated Transformer
Ventilated Transformer
Single Phase Transformer Ampere Ratings
Single Phase Full Load Amperes (FLC)
KVA
120V
.25
.50
.75
1
1.5
2
3
5
7.5
10
15
25
37.5
50
75
100
167
208V
240V
277V
480V
600V
2.0
4.2
6.3
8.3
12.5
1.2
2.4
3.6
4.8
7.2
1.0
2.1
3.1
4.2
6.2
0.9
1.8
2.7
3.6
5.4
0.5
1.0
1.6
2.1
3.1
0.4
0.8
1.3
1.7
2.5
16.7
25
41
62
83
9.6
14.4
24
36
48
8.3
12.5
20.8
31
41
7.2
10.8
18.0
27
36
4.2
6.2
10.4
15.6
20.8
3.3
5
8.3
12.5
16.7
125
206
312
416
625
72
120
180
240
340
62
104
156
208
312
54
90
135
180
270
31
52
76
104
156
25
41
62
83
125
833
1391
480
803
416
695
361
603
208
347
166
278
Three Phase Transformer Ampere Ratings
Three Phase Full Load Amperes (FLC)
KVA
208V
3
6
9
15
30
240V
8.3
16.6
25
41.7
83.4
45
75
112.5
150
225
300
500
750
1000
480V
7.2
14.4
21.6
36.1
72.3
124
208
312
416
108
180
270
360
624
832
1387
2084
2779
541
721
1202
1806
2408
600V
3.6
7.2
10.8
18.0
36.1
2.9
5.8
8.6
14.4
28.9
54.2
90
135
180
43.4
72
108
144
270
360
601
903
1204
216
288
481
723
963
Insulation Class and Temperature Rise
KVA
Insulation
1-Phase
0.25–25
15–167
3-Phase
NEMA Class
Temperature
Class
Temperature
Rise
3–15
F
180° C
115° C
15–1000
H
220° C
150° C
Sound Level in Decibels — 600V Class
KVA
0–9
10–50
51–150
151–300
NEMA
Average dB
40
45
50
55
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
KVA
NEMA
Average dB
301–500
501–700
701–1000
60
62
64
Transformers
Dry Type Distribution 600 Volt Class
Siemens dry type distribution transformers
are rated 600 volt class and are available
in a wide variety of ratings to provide
versatile electrical distribution for general
purpose, lighting and power loads in
commercial and industrial applications.
Ratings are available from 0.25 through
167 kVA single phase, and 3 through 1000
kVA 3-phase. A variety of primary and
secondary voltage ratings are available to
match the load requirements to the
distribution system. All units meet
applicable ANSI and NEMA standards.
Standard designs are UL Listed.
Dry type transformers are air cooled by
natural convection. They require no
special vaults for installation, and can
be installed in locations convenient to
the load being served.
Encapsulated designs are provided for
ratings from 0.25 kVA through 15 kVA,
1-phase, and from 3 kVA through 15
kVA 3-phase. These designs feature
indoor/outdoor enclosures with integral
wall mounting brackets, and 115°C rise,
180°C insulation system.
Options
쐍 Special K-Factor ratings
쐍 Special voltage ratings
쐍 NEMA 3R Enclosure
쐍 80° or 115°C temperature rise
쐍 Low noise designs
Ventilated Transformer
A wide variety of designs and optional
accessories are available including
weather shields for outdoor NEMA 3R
protection.
쐍 Copper windings
쐍 Drip shields
쐍 Wall mounting brackets (15–50 kVA)
Ventilated Features
쐍 UL Listed Designs
쐍 Designed for Indoor Installation
쐍 Core and Coils are Designed with UL
Listed High-Temperature Materials —
rated for 220°C; standard units feature 150°C winding temperature rise
쐍 Rugged Sheet Steel Enclosure per
ULI561, UL506 standards with
Removable Panels for Access to
Internal Wiring Area
쐍 Neoprene Noise Dampening Pads
Isolate the Core and Coil from the
Enclosure
쐍 High Quality, Non-Aging Electrical
Grade Core Steel
쐍 Precision Wound Coils
Encapsulated Features
쐍 UL Listed Designs
쐍 Totally Enclosed, Non-Ventilated
쐍 Heavy Gauge Steel Enclosure
쐍 Core and Coil Completely Embedded
Within a Resin Compound — quiet,
low temperature operation
쐍 Encapsulation — seals out moisture
and air
쐍 UL Listed Indoor/Outdoor Enclosure
— features integral wall mounting
brackets
쐍 Rugged Design Resists Weather,
Dust, and Corrosion
쐍 Efficient, Compact, Lightweight —
easy to install
쐍 Flexible Wiring Leads Terminate
Within Bottom Wiring Compartment
쐍 Large Wiring Compartment on
Bottom with Convenient Knockouts
쐍 High Quality Non-Aging Electrical
Grade Core Steel
쐍 Precision Wound Coils
Options
쐍 Copper windings
쐍 Electrostatic shield (3 kVA and larger)
Options
쐍 Low temperature rise of 115°C or
80°C winding temperature rise for
increased efficiency and additional
overload capability
쐍 Outdoor enclosures
쐍 Totally enclosed non-ventilated
designs
쐍 Copper windings
쐍 Electrostatic shield
쐍 Low noise designs
쐍 K-factor rated designs
쐍 Drip shields and wall brackets available
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-3
TRANSFORMERS
K-Factor Features
쐍 Designed to ANSI and NEMA
Standards
쐍 UL K-Factor Listed per UL 1561
쐍 K-Factor Rating Designed to IEEE
c57.110
쐍 Aluminum Wound Coils
쐍 Core, Conductors designed for
Harmonics and Eddy Currents 150°C
Rise, 220°C Insulation
쐍 Electrostatic Shield to Attenuate Line
Transients
쐍 200% Neutral Bar (2X Phase current)
쐍 NEMA 1 Enclosure
Encapsulated Transformer
Ventilated designs are provided for ratings
from 25 kVA through 167 kVA 1- phase,
and from 15 kVA through 1000 kVA 3phase. These feature indoor enclosures,
150°C rise, and 220°C insulation system.
7
K-Factor Rated for Non-Linear Loads
Siemens offers transformer designs
which meet K-Factor ratings. K-Factor is
a ratio between the additional losses
due to harmonics and the eddy losses at
60Hz. It is used to specify transformers
for non-linear loads. Note that K-Factor
transformers do not eliminate harmonic
distortion; they withstand the non-linear
load condition without overheating.
General
Transformers
Dry Type Distribution 600 Volt Class
TRANSFORMERS
7
K-Factor Rated For NonLinear Loads
Furnish and install K-Factor rated dry type
transformers of the two winding type,
self-cooled, with 60Hz ratings as indicated on the electrical plans. Unless specified otherwise, provide standard NEMA
taps, standard impedance, and standard
sound levels. Transformers shall be
Siemens or approved equal.
Transformers shall be designed, manufactured, and tested in accordance with
ANSI, NEMA and IEEE Standards and
shall be UL Listed. The self-coded kVA
rating shall be suitable for 30°C average,
40°C maximum ambient temperature.
Non-Linear rated transformers shall be
suitable for nonsinusoidal loads and harmonic distortion as indicated in IEEE
C57.110, and shall be designed with the
following K-Factor rating (choose one):
K4 for 50% Non-Linear load
K13 for 100% Non-Linear load
K20 for 150% Non-Linear load
K30 for 200% Non-Linear load
Non-Linear rated transformers shall be
UL Listed and shall bear the UL marking
on the nameplate along with the specified K-Factor rating. Non-Linear rated
transformers shall include the following
design features:
a) Core designed to withstand voltage distortion and high frequency
harmonic currents. Magnetic flux
density designed to reduce eddy
currents and prevent saturation or
overheating of the core.
b) Primary and secondary coils
designed to minimize stray losses,
skin effect losses, and excessive
heating from harmonic currents.
Coils shall not exceed the specified
7-4
winding temperature rise, the corresponding hot spot temperature
rating, or the 220°C insulation rating while carrying the specified
Non-Linear load.
c) Neutral bus sized for 200% of
rated current to withstand circulating currents and triplen harmonics.
d) An Electrostatic Shield between
the primary and secondary winding
and grounded to a common point
within the transformer enclosure.
When properly grounded, the
shield shall provide noise isolation
and attenuate common mode and
transverse mode noise transients
under normal loading conditions.
e) The design and materials used
shall enable the transformers to
comply with NEMA TP1 efficiency
standards.
Transformers rated 15 kVA and larger
shall be a ventilated dry type with a UL
Listed 220°C insulation system. Units
shall be designed to operate with a
rated maximum temperature rise of
150°C (Provide optional 115°C or 80°C
rise when specified).
Construction shall consist of aluminum
windings and arranged to brace coil layers and provide maximum ventilation.
(Provide optional copper windings when
specified). Cores shall be constructed of
non-aging electrical grade steel with
high magnetic permeability and low loss
characteristics.
Core laminations shall be tightly assembled. The complete core and coil
assembly shall be impregnated with
non-hydroscopic thermo-setting varnish
to provide a high dielectric, moistureresistant, and flame retardant seal.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Specifications
Core and coil assemblies shall be constructed to provide short circuit with
stand capability as defined by ANSI and
NEMA standards. The complete assembly shall be installed on vibration dampening pads to reduce noise and securely
bolted to the enclosure base. A flexible
grounding conductor shall be installed
between the core and coil assembly
and the transformer enclosure.
Enclosures shall be ventilated, heavy
gauge steel construction finished with
light gray paint. Front and rear covers
shall be removable to provide access to
the terminal compartment. Terminals
shall be fully sized to carry the transformer full load current and shall be
arranged to accept required UL-Listed
cable connectors. Units installed outdoors shall have a UL-Listed type 3R
outdoor enclosure, or shall be UL Listed
with optional weathershields installed.
Standard voltage ratings shall be supplied with NEMA standard taps for the
high voltage windings.
Unless specified otherwise, average
sound levels (150°C rise) shall meet the
following ANSI/ NEMA standards:
0 to 9 kVA
40 dB
10 to 50 kVA
45 dB
51 to 150 kVA
50 dB
151 to 300 kVA
55 dB
301 to 500 kVA
60 dB
501 to 700 kVA
62 dB
701 to 1000 kVA
64 dB
Each transformer shall have a securely
attached nameplate providing complete
electrical ratings, wiring diagram, tap
connections, and catalog number, as
applicable.
Distribution Dry Type Transformers
Catalog Number Coding System for Transformers
3 F 3 Y 150 R K13 F ES C LN3 Z4 TE TEE TP1 LZ HM1
Basic Rating Information
Phase
Primary Voltage
Secondary Voltage
Taps
kVA
Optional Modifications
Reduced Size Plus (RSP) Model
K-Factor (K4, K13, K20, K30)
Low Temperature Rise: 130C = (G), 115C = (F), 80C = (B)
Electrostatic Shield (ES)(ES2=dual, ES3=120dB attenuation on HM1 & 2)
Copper Wound (C)
Low Noise (LN3 = 3dB below, LN5, etc.)
Seismic Zone 4 Rated (Z4)
Totally Enclosed NEMA 3R (TE)
Totally Enclosed Encapsulated N-3R (TEE)
Energy Efficient (NEMA -TP1)
Frequency 50/60Hz
Harmonic Mitigation (HM1=1 secondary/single output, HM2=2 secondaries/double output)
Super Energy Efficient - Surpasses NEMA-TP1 (Available on TP1, HM1, HM2, “TP1S”, ”HM1S”, “HM2S”
Phase Shift for HM1 select > (00) or (30) degree
Phase Shift for HM2 select > (03) for 0 & 30 or (15) for 15 & 45 degree lagging, or (PN15) for 15 pos & 15 neg
Thermal Switches (TS7=170C, TS8=180C or TS0=200C)(TS72=2 switches, TS76=6 switches @ 170C, etc.)
TVSS - Filter Capacitors Secondary Side with Surge Compression
Terminal Block
Stainless Steel Enclosure N-3R w/DS or N4X w/SSN4X
Enclosure Types NEMA 4X (SSN4X), NEMA 12 (N12), NEMA 4 (N4)
Special Impedance — I4 = 4% max, I3 = 3% max etc.
Fungus Proofing
Core and Coil Assembly with nameplate displayed on frame bracket (may be shipped in std. enclosure)
Wall Mounting Brackets (W)
Vent Guard
Drip Shields (weathershields) to provide NEMA-3R (DS)
Note 1: If the catalog number will not completely describe the product, it will be identified as SPC-_ _ _KVA-XFMR.
Note 2: “QST” suffix on catalog numbers defines units available in the Siemens warehouse distribution system.
Note 3: Suffix K4TP1 or K13TP1 will indicate K-Factor rating and TP1 rating at K1 loading.
Primary
Phase
1-Phase
3-Phase
1
3
Secondary
A
B
C
D
E
F
G
120/240
240
208Y/120
120/208
480Y/277
380Y/219
230Y/133
110/220
X
TAPS
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
KVA
KVA
Catalog
Code
KVA
Catalog
Code
KVA
Catalog
Code
KVA
Catalog
Code
0.25
0.50
0.75
1
1.5
2
3
205
505
705
001
105
002
003
5
6
7.5
9
10
15
25
005
006
007
009
010
015
025
30
37.5
45
50
75
100
112.5
030
037
045
050
075
100
112
150
167
225
300
500
750
1000
150
167
225
300
500
750
000
Available
in 3-phase 3 to 15 KVA only.
are determined by transformer design and are not selectable on standard
catalog units.
With continuous overloads these units will be operating as 150°C rise designs.
”XES” Suffix coding for shielded isolation with filters & surge suppression.
Applies to HMT designs.
Taps
30 TS7 TV TB SS SSN4X I3 P CC W VG DS
OPTIONAL PRODUCT OFFERINGS
1. For non-standard or non-cataloged voltages or non-cataloged
primary taps refer to sales office.
2. Non-standard application, 50/60 Hz, special impedance,
voltage, etc. — consult sales office.
3. Wall mounting brackets and weathershields — available at
no charge on all indicated units when requested at time of
initial project order. Contact sales office for feasibility of wall
brackets on units with special temperature rise, low noise,
or copper windings.
4. Special temperature rise:
— 115° C rise, can tolerate 15% continuous overload.
(Suffix Code F)
— 80° C rise, can tolerate 30% continuous overload.
(Suffix Code B)
5. Copper windings — Available on most designs. (Suffix Code C)
6. Low Noise Suffix code LN3 (3dB below std.) available as
indicated. For LN5, etc. contact sales office with required
sound level.
7. Totally Enclosed Non-Ventilated (TE) — see page 7-8.
8. Auto transformers (A) — see page 7-11.
9. Non-standard paint color — contact sales office.
10. Electrostatic shield (full width copper foil) for added noise
attenuation and reduction of high frequency disturbances.
(Suffix Code ES)
11. Energy Efficient (NEMA TP1), Meets TP1-1996 Efficiency.
12. Harmonic mitigating transformers—see page 7-15.
13. Transformer and panel combinations—see page 7-13.
14. Reduced Size Plus models—see page 7-17.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-5
TRANSFORMERS
H
1
2
3
3
5
6
7
8
S
7
190/200/208/220x380
400/416/440
190/208/220/240x380
416/440/480
240X120
208
240
480X240
277
480
600
Export
Range
Export
Range
Selection
Distribution Dry Type Transformers
Single Phase
KVA
Catalog
Number
Selection
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
115°
115°
115°
115°
115°
115°
115°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
180°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Floor
Floor
Floor
Floor
Floor
Floor
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
2
2
1b, 2, 3
1b, 2, 3
1b, 2, 3
1b, 2, 3
1b, 2, 3
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 51
No
No
No
No
No
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
None
None
None
2, 1b
None
2, 1b
2, 1b
2, 1b
2, 1b
2, 1b
2, 1b
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
208 Volts Primary, 120/240 Volts Secondary
1.
2.
3.
5.
7.5
010.
015.
025.
037.5
050.
075.
0100.
0167.
1B1N001
1B1N002
1B1N003
1B1N005
1B1N007
1B1N010
1B1N015
1B1Y025TP1
1B1Y037TP1
1B1Y050TP1
1B1Y075TP1
1B1Y100TP1
1B1Y167TP1
377.00
629.00
770.00
967.00
1425.00
1614.00
1859.00
5509.00
6502.00
7597.00
18495.00
20659.00
51057.00
N
N
N
N
N
N
N
N
N
N
N
N
N
240 ⴒ 480 Volts Primary, 120/240 Volts Secondary
.25
.50
.75
1.0
1.5
2.0
3.0
5.0
7.5
10.0
15
1D1N205
1D1N505
1D1N705
1D1N001
1D1N105
1D1N002
1D1N003
1D1N005
1D1N007
1D1N010
1D1N015
164.00
255.00
381.00
380.00
552.00
631.00
769.00
968.00
1405.00
1603.00
1868.00
N
N
N
N
N
N
N
N
N
N
N
115°
115°
115°
115°
115°
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
15
25
37.5
50
1D1Y015TP1
1D1Y025TP1
1D1Y037TP1
1D1Y050TP1
3562.00
5283.00
6720.00
7737.00
Y
Y
Y
Y
150°
150°
150°
150°
C
C
C
C
220°
220°
220°
220°
C
C
C
C
Floor
Floor
Floor
Floor
1D1Y075TP1
1D1Y100TP1
1D1Y167TP1
10254.00
21106.00
32804.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
1b,
1b,
2,
2,
2,
2,
2,
2,
3
3
3
3
3
31
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
1b,
1b,
2,
2,
2,
2,
2,
2,
3
3
3
3
3
31
75
100
167
&
&
&
&
Wall
Wall
Wall
Wall
TRANSFORMERS
7
277 Volts Primary, 120/240 Volts Secondary
3
5
7.5
10
15
25
1E1U003
1E1U005
1E1U007
1E1U010
1E1U015
1E1U025
755.00
978.00
1535.00
1804.00
5170.00
5311.00
U
U
U
U
U
U
480 Volts Primary, 120/240 Volts Secondary
3
5
7.5
10
15
25
1F1R003
1F1R005
1F1R007
1F1R010
1F1R015
1F1R025
774.00
968.00
1415.00
1598.00
1868.00
4314.00
R
R
R
R
R
R
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a.
1b.
2.
3.
4.
5.
F
B
ES
C
W
DS
115° C Rise
80° C Rise
Electrostatic Shield
Copper Windings
Wall Mounting Brackets1
Drip Shields
Actual
taps may vary based on volts/turn ratio.
designations for units having standard features.
outdoor application. Ventilated transformers
requiring drip shields/weathershields are UL listed
Wall
For
7-6
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
for outdoor use. No charge when requested at time of
initial project order.
transformers are UL listed for indoor/
outdoor use.
Encapsulated
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
No
charge when requested at time of initial project order.
marked floor and wall can be wall mounted with
optional wall bracket identified with “W” suffix on
catalog number.
Items
Discount Schedule XFMR
Distribution Dry Type Transformers
Single Phase
KVA
Selection
Catalog
Number
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
180°
180°
180°
180°
180°
180°
Wall
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
1b,
1b,
600 Volts Primary, 120/240 Volts Secondary
3
5
7.5
10
15
25
1G1R003
1G1R005
1G1R007
1G1R010
1G1R015
1G1R025
25
37.5
50
75
100
167
780.00
1246.00
1759.00
1617.00
3665.00
5555.00
R
R
R
R
R
R, U
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
C
C
C
C
C
C
2,
2,
2,
2,
2,
2,
3
3
3
3
3
3
1G1Y025TP1
1G1Y037TP1
1G1Y050TP1
9545.00
12171.00
14122.00
Y, U
Y, U
Y, U
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1G1Y075TP1
1G1Y100TP1
1G1Y167TP1
20472.00
25821.00
51057.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
2, 3, 5
2, 3, 5
2, 3, 51
See page 7-6 for footnotes &
Overseas Model 190/200/208/220 x 380/400/416/440 Volts Primary, 120/240 Volts Secondary—1Ø, 50/60 Hz
1
2
3
5
7.5
10
15
1H1N001
1H1N002
1H1N003
1H1N005
1H1N007
1H1N010
1H1N015
828.00
1211.00
1570.00
1976.00
2613.00
3138.00
4030.00
N
N
N
N
N
N
N
115°
115°
115°
115°
115°
115°
115°
25
37.5
50
1H1N025
1H1N037
1H1N050
6532.00
7368.00
8571.00
N
N
N
115° C
150° C
150° C
1H1N075
1H1N100
10179.00
11550.00
N
N
150° C
150° C
75
100
C
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
2
2
2
2
2
2
2, 3
180° C
220° C
220° C
Wall
Floor & Wall
Floor & Wall
No
Yes
Yes
Encapsulated
Ventilated
Ventilated
2, 3
2, 3, 5
2, 3, 5
220° C
220° C
Floor
Floor
Yes
Yes
Ventilated
Ventilated
2, 3, 5
2, 3, 5
Overseas Model 190/208/220/240 x 380/416/440/480 Volts Primary, 120/240 Volts Secondary—1Ø, 50/60 Hz
1
2
3
5
7.5
10
15
1X1N001
1X1N002
1X1N003
1X1N005
1X1N007
1X1N010
1X1N015
828.00
1211.00
1570.00
1976.00
2613.00
3138.00
4030.00
N
N
N
N
N
N
N
115°
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
C
25
1X1N025
6532.00
N
115° C
180°
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
2
2
2
2
2
2
2, 3
180° C
Wall
No
Encapsulated
2, 3
1H8N001
1H8N002
1H8N003
1H8N005
1H8N007
828.00
1211.00
1570.00
1976.00
2613.00
N
N
N
N
N
115°
115°
115°
115°
115°
C
C
C
C
C
180°
180°
180°
180°
180°
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
No
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
2
2
2
2
2
TRANSFORMERS
1
2
3
5
7.5
7
Overseas Model 190/200/208/220 x 380/400/416/440 Volts Primary, 110/220 Volts Secondary—1Ø, 50/60 Hz
Notice: CE mark is included on sizes 1 through 25KVA on all overseas models.
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a.
1b.
2.
3.
4.
5.
F
B
ES
C
W
DS
115° C Rise
80° C Rise
Electrostatic Shield
Copper Windings
Wall Mounting Brackets1
Drip Shields
Discount Schedule XFMR
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-7
Distribution Dry Type Transformers
Three Phase
KVA
Catalog
Number
Selection
List
Price $
Temperature
Rise
Taps
Mounting
Type
Insulation
Drip Shield
Required
Enclosure
Style
Optional
Modifications
480 Volts Δ Primary, 240 Volts Δ Secondary With 120 Volt Tap On B Phase
15
30
45
3F1Y015TP1
3F1Y030TP1
3F1Y045TP1
4204.00
6562.00
6648.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
75
112.5
150
225
300
500
750
3F1Y075TP1
3F1Y112TP1
3F1Y150TP1
3F1Y225TP1
3F1Y300TP1
3F1Y500TP1
3F1Y750TP1
9606.00
13152.00
15852.00
22217.00
29647.00
59077.00
93911.00
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1, 2, 3, 5,
1, 2, 3, 5,
1, 2, 3, 5,
1, 2, 3, 5,
1, 2, 3, 5,
1, 2, 3, 5,
1a, 2, 3
115°
115°
115°
115°
C
C
C
C
180°
180°
180°
180°
C
C
C
C
Wall
Wall
Wall
Wall
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
2,
2,
2,
2,
3
3
3
3
C
C
C
C
180°
180°
180°
180°
C
C
C
C
Wall
Wall
Wall
Wall
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
2,
2,
2,
2,
3
3
3
3
7
7
7
7
7
7
480 Volts Δ Primary, 240 Volts Δ Secondary
3
6
9
15
3F2R003
3F2R006
3F2R009
3F2R015
2094.00
2774.00
3457.00
5035.00
R
R
R
R
480 Volts Δ Primary, 208Y/120 Volts Secondary
3
6
9
15
3F3R003
3F3R006
3F3R009
3F3R015
1807.00
1899.00
2735.00
2943.00
R
R
R
R
115°
115°
115°
115°
15
30
45
3F3Y015TP1
3F3Y030TP1
3F3Y045TP1
4246.00
5467.00
6494.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5, 6, 7
1, 2, 3, 4, 5, 6, 7
1, 2, 3, 4, 5, 6, 7
75
112.5
150
225
300
500
750
1000
3F3Y075TP1
3F3Y112TP1
3F3Y150TP1
3F3Y225TP1
3F3Y300TP1
3F3Y500TP1
3F3Y750TP1
3F3S000TP1
9244.00
11607.00
15472.00
19634.00
27092.00
41465.00
92836.00
91694.00
Y
Y
Y
Y
Y
Y
Y
J, Y, K, S
150°
150°
150°
150°
150°
150°
150°
150°
220°
220°
220°
220°
220°
220°
220°
220°
Floor & Wall
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1, 2, 3,
1, 2, 3,
1, 2, 3,
1, 2, 3,
1, 2, 3,
1, 2, 3,
1, 2, 3,
None
KVA
Catalog
Number
List
Price $
Taps
C
C
C
C
C
C
C
C
Temperature
Rise
C
C
C
C
C
C
C
C
5,
5,
5,
5,
5,
5,
7
6,
6,
6,
6,
6,
6,
7
7
7
7
7
7
Insulation
Mounting
Type
Drip Shield
Required
Optional
Modifications
Avg. Sound
Level
220°
220°
220°
220°
220°
220°
Floor
Floor
Floor
Floor
Floor
Floor
No
No
No
No
No
No
None
None
None
None
None
None
45dB
45dB
50dB
50dB
55dB
55dB1
No
No
No
No
No
No
None
None
None
None
None
None
45dB
45dB
50dB
50dB
55dB
55dB1
TRANSFORMERS
7
Totally Enclosed Transformers, Indoor/Outdoor Use
480 Volts Δ Primary, 208Y/120 Volts Secondary
15
30
45
75
112.5
150
3F3Y015TE
3F3Y030TE
3F3Y045TE
3F3Y075TE
3F3Y112TE
3F3Y150TE
7260.00
10382.00
12171.00
17130.00
12626.00
15862.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
C
C
C
480 Volts Δ Primary, 240 Volts Δ Secondary with 120V Lighting Tap on B Phase
15
30
45
75
112.5
150
3F1Y015TE
3F1Y030TE
3F1Y045TE
3F1Y075TE
3F1Y112TE
3F1Y150TE
7260.00
10382.00
12171.00
16981.00
23718.00
30907.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a. 115°C Rise
1b. 80°C Rise
2. Electrostatic Shield
3. Copper Windings
4. Wall Mounting Brackets1
5. Drip Shields
6. Low noise — 3dB below std.
7. Super Energy Efficient
F
B
ES
C
W
DS
LN3
S 1
Actual
taps may vary based on volts/turn ratio.
designations for units having standard features.
outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use.
Encapsulated transformers are UL listed for indoor/
outdoor use (2.5% on each side of lighting tap).
Reduced capacity 1-phase tap— When utilizing 1-phase
Wall
For
7-8
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
tap at 5%, the 3-phase load is reduced to 85% max. (5%
reduction on 3 coils). 10% of rated KVA absolute
maximum (evenly balanced on each side of lighting
tap). When utilizing 1-phase tap at 10%, the 3-phase
load is reduced to 70% max. (10% reduction on 3 coils).
No charge when requested at time of initial project order.
240 volt secondary (3F2) is available in 3-phase 3 to
15KVA only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
TE
units will have inrush equal to 2 sizes
larger than rated KVA.
marked floor and wall can be wall mounted
with optional wall bracket identified with “W” suffix
on catalog number.
Wall mounting for 150˚C rise aluminum only.
TP1S “S” features are described on page 7-14.
Items
Discount Schedule XFMR
Distribution Dry Type Transformers
Three Phase
KVA
Selection
Catalog
Number
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosed
Type
Optional
Modifications
480 Volts Δ Primary, 480Y/277 Volts Secondary
15
3F5R015
4660.00
R
115° C
180° C
Wall
No
Encapsulated
1b, 2, 3
15
30
45
3F5Y015TP1
3F5Y030TP1
3F5Y045TP1
3952.00
33766.00
8191.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5, 7
1, 2, 3, 4, 5, 7
1, 2, 3, 4, 5, 7
75
112.5
150
225
300
500
3F5Y075TP1
3F5Y112TP1
3F5Y150TP1
3F5Y225TP1
3F5Y300TP1
3F5Y500TP1
12353.00
17122.00
15157.00
30016.00
43146.00
78455.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
2,
2,
2,
2,
2,
2,
3,
3,
3,
3,
3,
3,
5,
5,
5,
5,
5,
5,
220°
220°
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
1,
1,
1,
3,
3,
3,
3,
3,
3,
3,
3,
3,
4,
4,
4,
5,
5,
5,
5,
5,
5,
5, 6
5, 6
5, 6
6
6
6
6
6
61
220°
220°
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
1,
1,
1,
3,
3,
3,
3,
3,
3,
3,
3,
3,
4,
4,
4,
5,
5,
5,
5,
5,
5,
5,
5,
5,
6,
6,
6,
6,
6,
6,
220°
220°
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
1,
1,
1,
3,
3,
3,
3,
3,
3,
3,
3,
3,
4, 5
4, 5
4, 5
5
5
5
5
5
51
220°
220°
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
1,
1,
1,
3,
3,
3,
3,
3,
3,
3,
3,
3,
4, 5
4, 5
4, 5
5
5
5
5
5
51
C
C
C
C
C
C
7
7
7
7
7
7
3-Phase 480 Δ — 208Y/120 K-4 (50% Non-Linear Load)
15
30
45
75
112.5
150
225
300
500
3F3Y015K4TP1
3F3Y030K4TP1
3F3Y045K4TP1
3F3Y075K4TP1
3F3Y112K4TP1
3F3Y150K4TP1
3F3Y225K4TP1
3F3Y300K4TP1
3F3Y500K4TP1
5480.00
5903.00
6945.00
10012.00
13214.00
17173.00
23977.00
32603.00
81244.00
Y
Y
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
3-Phase 480 Δ — 208Y/120 K-13 (100% Non-Linear Load)
15
30
45
75
112.5
150
225
300
500
3F3Y015K13TP1
3F3Y030K13TP1
3F3Y045K13TP1
3F3Y075K13TP1
3F3Y112K13TP1
3F3Y150K13TP1
3F3Y225K13TP1
3F3Y300K13TP1
3F3Y500K13TP1
6181.00
6659.00
7766.00
11103.00
14912.00
19380.00
27282.00
36776.00
96114.00
Y
Y
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
6, 7
6, 7
6, 7
7
7
7
7
7
7
3-Phase 480 Δ — 208Y/120 K-20 (125% Non-Linear Load)
6659.00
9193.00
10870.00
15244.00
23304.00
25308.00
36122.00
53724.00
105122.00
Y
Y
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
TRANSFORMERS
3F3Y015K20TP1
3F3Y030K20TP1
3F3Y045K20TP1
3F3Y075K20TP1
3F3Y112K20TP1
3F3Y150K20TP1
3F3Y225K20TP1
3F3Y300K20TP1
3F3Y500K20TP1
7
15
30
45
75
112.5
150
225
300
500
3-Phase 480 Δ — 208Y/120 K-30 (150% Non-Linear Load)
15
30
45
75
112.5
150
225
300
500
3F3Y015K30TP1
3F3Y030K30TP1
3F3Y045K30TP1
3F3Y075K30TP1
3F3Y112K30TP1
3F3Y150K30TP1
3F3Y225K30TP1
3F3Y300K30TP1
3F3Y500K30TP1
CSO
8451.00
11749.00
CSO
28298.00
CSO
CSO
CSO
CSO
Y
Y
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a. 115°C Rise
1b. 80°C Rise
2. Electrostatic Shield
3. Copper Windings
4. Wall Mounting Brackets1
5. Drip Shields
6. Low noise — 3dB below std.
7. Super Energy Efficient
F
B
ES
C
W
DS
LN3
S 1
Actual
taps may vary based on volts/turn ratio.
designations for units having standard features.
For outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use.
Wall
Discount Schedule XFMR
Encapsulated
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
transformers are UL listed for indoor/
outdoor use. 9 & 15kva with R taps also available in
ventilated enclosures.
K-Factor transformers equipped with electrostatic shield
and 200% neutral as standard features.
No
charge when requested at time of initial project order.
marked floor and wall can be wall mounted with
optional wall bracket identified with “W” suffix on
catalog number.
TP1S features are described on page 7-14.
Items
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-9
Distribution Dry Type Transformers
Three Phase
KVA
Catalog
Number
Selection
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
180°
180°
180°
180°
220°
220°
220°
Wall
Wall
Wall
Wall
Floor & Wall
Floor & Wall
Floor & Wall
No
No
No
No
Yes
Yes
Yes
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Ventilated
Ventilated
Ventilated
1b, 2, 3
1b, 2, 3
1b, 2, 3
1b, 2, 3
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
208 Volts Δ Primary, 208Y/120 Volts Secondary
3
6
9
15
15
30
45
3B3R003
3B3R006
3B3R009
3B3R015
3B3Y015TP1
3B3Y030TP1
3B3Y045TP1
1923.00
3055.00
4166.00
5140.00
4038.00
6953.00
21463.00
R
R
R
R
Y, T
Y, T
Y, T
115°
115°
115°
115°
150°
150°
150°
C
C
C
C
C
C
C
C
C
C
C
C
C
C
75
112.5
150
3B3Y075TP1
3B3Y112TP1
3B3Y150TP1
26602.00
33138.00
19676.00
Y, T
Y, T
Y, T, M
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
225
300
500
3B3S225TP1
3B3S300TP1
3B3S500TP1
32520.00
46740.00
84992.00
R, S
R, S
R, S
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 51
208 Volt Δ Primary, 240 Δ Secondary with 120 Volt TAP on B Phase
15
30
45
75
112.5
150
225
3B1Y015TP1
3B1Y030TP1
3B1Y045TP1
3B1Y075TP1
3B1Y112TP1
3B1Y150TP1
3B1Y225TP1
4165.00
9585.00
12455.00
19323.00
24112.00
28211.00
37520.00
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
1,
2,
2,
2,
2,
2,
2,
2,
3,
3,
3,
3,
3,
3,
3,
4,
4,
4,
4,
4,
4,
4,
5
5
5
5
5
5
5
C
C
C
C
180°
180°
220°
220°
C
C
C
C
Wall
Wall
Floor & Wall
Floor & Wall
No
No
Yes
Yes
Encapsulated
Encapsulated
Ventilated
Ventilated
1b, 2, 3
1b, 2, 3
1, 2, 3, 4, 5
1, 2, 3, 4, 5
208 Volts Δ Primary, 480Y/277 Volts Secondary
9
15
30
45
3B5R009
3B5R015
3B5R030TP1
3B5R045TP1
4176.00
4934.00
6983.00
8201.00
R
R
R
R
115°
115°
150°
150°
75
112.5
150
3B5R075TP1
3B5R112TP1
3B5R150TP1
11559.00
19146.00
19088.00
R
R
R
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
225
300
500
3B5S225TP1
3B5S300TP1
3B5S500TP1
26527.00
65844.00
95283.00
S
S
S
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 51
TRANSFORMERS
7
240 Volts Δ Primary, 208Y/120 Volts Secondary
15
30
45
3C3Y015TP1
3C3Y030TP1
3C3Y045TP1
7780.00
13383.00
7871.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
75
112.5
150
3C3Y075TP1
3C3Y112TP1
3C3Y150TP1
11683.00
15676.00
17465.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
225
300
500
3C3S225TP1
3C3S300TP1
3C3S500TP1
32520.00
46740.00
56332.00
S
S
S
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 51
240 Volts Δ Primary, 480Y/277 Volts Secondary
15
30
45
3C5Y015TP1
3C5Y030TP1
3C5Y045TP1
7780.00
9585.00
12455.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
75
112.5
150
3C5Y075TP1
3C5Y112TP1
3C5Y150TP1
17138.00
21398.00
28211.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
225
300
500
3C5S225TP1
3C5S300TP1
3C5S500TP1
45801.00
65844.00
84992.00
S
S
S
150° C
150° C
150° C
220° C
220° C
220° C
Floor
Floor
Floor
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 51
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a.
1b.
2.
3.
4.
5.
6.
F
B
ES
C
W
DS1
LN31
115° C Rise
80° C Rise
Electrostatic Shield
Copper Windings
Wall Mounting Brackets1
Drip Shields
Low noise—3dB below std.
Actual
taps may vary based on volts/turn ratio.
designations for units having standard features.
outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use.
Encapsulated transformers are UL listed for indoor/
outdoor use. 9 & 15kva with R taps also available in
ventilated enclosures.
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
Wall
For
7-10
No
charge when requested at time of initial project
order.
Items marked floor and wall can be wall mounted with
optional wall bracket identified with “W” suffix on
catalog number.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Reduced
capacity 1-phase tap— When utilizing 1-phase
tap at 5%, the 3-phase load is reduced to 85% max. (5%
reduction on 3 coils). 10% of rated KVA absolute
maximum (evenly balanced on each side of lighting
tap). When utilizing 1-phase tap at 10%, the 3-phase
load is reduced to 70% max. (10% reduction on 3 coils).
Discount Schedule XFMR
Distribution Dry Type Transformers
Three Phase
KVA
Selection
Catalog
Number
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
180°
180°
180°
180°
Wall
Wall
Wall
Wall
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1b,
1b,
1b,
1b,
600 Volts Δ Primary, 208Y/120 Volts Secondary
3
6
9
15
3G3R003
3G3R006
3G3R009
3G3R015
3476.00
2541.00
3137.00
4846.00
R
R
R
R
115°
115°
115°
115°
15
30
45
75
112.5
150
225
300
500
C
C
C
C
C
C
C
C
2,
2,
2,
2,
3G3Y015TP1
3G3Y030TP1
3G3Y045TP1
6740.00
8309.00
10797.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
1, 2, 3, 4, 5
1, 2, 3, 4, 5
1, 2, 3, 4, 5
3G3Y075TP1
3G3Y112TP1
3G3Y150TP1
3G3Y225TP1
3G3Y300TP1
3G3Y500TP1
14854.00
18545.00
24455.00
32520.00
46740.00
84992.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
C
C
C
C
180°
180°
180°
180°
C
C
C
C
Wall
Wall
Wall
Wall
No
No
No
No
Encapsulated
Encapsulated
Encapsulated
Encapsulated
2
2
2
2
2,
2,
2,
2,
2,
2,
3
3
3
3
3,
3,
3,
3,
3,
3,
5
5
5
5
5
51
600 Volts Δ Primary, 480Y/277 Volts Secondary
3
6
9
15
3G5R003
3G5R006
3G5R009
3G5R015
1819.00
3009.00
4684.00
8424.00
R
R
R
R
115°
115°
115°
115°
15
30
45
3G5Y015TP1
3G5Y030TP1
3G5Y045TP1
7780.00
9585.00
12455.00
Y
Y
Y
150° C
150° C
150° C
220° C
220° C
220° C
Floor & Wall
Floor & Wall
Floor & Wall
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
2, 4, 5
2, 4, 5
2, 4, 5
75
112.5
150
225
300
500
3G5Y075TP1
3G5Y112TP1
3G5Y150TP1
3G5Y225TP1
3G5Y300TP1
3G5Y500TP1
17138.00
30128.00
28211.00
37520.00
52867.00
98065.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
220°
220°
220°
220°
220°
220°
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1,
1,
1,
1,
1,
1,
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
C
C
C
C
C
C
C
C
C
C
C
C
2,
2,
2,
2,
2,
2,
3,
3,
3,
3,
3,
3,
5
5
5
5
5
51
Dual Purpose Auto Transformers
KVA
600V Pri 480V Pri
480V Sec 380V Sec
Catalog
Number
List
Price $
Taps
Temperature
Rise
Insulation
600 Volts Primary, 480 Volts Secondary 3Ø 60 Hz &— 480 Volts Primary 380 Volts Secondary 3Ø 50/60 Hz Alternate Rating
75
112.5
150
225
300
500
60
90
120
180
240
400
3G4R015A
3G4R030A
3G4R045A
2008.00
2549.00
3816.00
R
R
R
115° C
115° C
115° C
180° C
180° C
180° C
Wall
Wall
Wall
3G4R075A 5552.00
3G4R112A 6603.00
3G4R150A 7655.00
3G4R225A 9240.00
3G4R300A 12020.00
3G4R500A 16155.00
R
R
R
R
R
R
115°
150°
150°
150°
150°
150°
180°
220°
220°
220°
220°
220°
Floor
Floor
Floor
Floor
Floor
Floor
C
C
C
C
C
C
Optional Modifications Table (Contact Sales office for List Price)
Optional (commonly used)
Modifications
Catalog
Suffix Code
1a.
1b.
2.
3.
4.
5.
F
B
ES
C
W
DS
115° C Rise
80° C Rise
Electrostatic Shield
Copper Windings
Wall Mounting Brackets1
Drip Shields
Actual
taps may vary based on volts/turn ratio.
designations for units having standard features.
outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use.
Wall
For
Discount Schedule XFMR
Encapsulated
C
C
C
C
C
C
&
&
&
&
&
&
Wall
Wall
Wall
Wall
Wall
Wall
Encapsulated
Encapsulated
Encapsulated
—
—
—
No
Yes
Yes
Yes
Yes
Yes
Encapsulated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
4
4, 5
4, 5
4, 5
4, 5
51
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
transformers are UL listed for indoor/
outdoor use.
charge when requested at time of initial project order.
If used on unbalanced loads, these auto transformers
will need to be used on a 4-wire system with the supply
neutral connected to the transformer. If used on motor
No
No
No
No
TRANSFORMERS
12
24
36
7
15
30
45
loads, then they may be used on a 3-wire system without
a neutral or fourth wire. Review in NEC 450-4 and 450-5.
marked floor and wall can be wall mounted with
optional wall bracket identified with “W” suffix on
catalog number.
Items
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-11
Distribution Dry Type Transformers
Three Phase
Selection
Isolation & Filtering
Transformers
shielding provide excellent transverse
mode noise attenuation of 60 db.
Additionally the common mode noise
attenuation of 120 db will increase
protection from line noise, spikes
and surges.
either 208 volt or 480 volt primary and
280Y/120 volt secondary up to 225 kVA.
All units have spike/surge protection on
the primary side and low pass filters on
the secondary. The combination of these
components and the electrostatic
The Siemens “XES” models are
specifically designed to protect sensitive
equipment from surges, spikes and line
noise. These designs are available with
Shielded Isolation with Filter Capacitors and Surge Suppression (“XES” Models)
KVA
Catalog
Number
List
Price $
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Optional
Modifications
150°
150°
150°
150°
150°
C
C
C
C
C
220°
220°
220°
220°
220°
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1, 3, 4, 5
1, 3, 4, 5
1, 3, 4, 5
1, 3, 5
1a, 3, 5
150°
150°
150°
150°
150°
C
C
C
C
C
220°
220°
220°
220°
220°
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1, 3, 4, 5
1, 3, 4, 5
1, 3, 4, 5
1, 3, 5
1a, 3, 5
150°
150°
150°
150°
150°
C
C
C
C
C
220°
220°
220°
220°
220°
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
Yes
Yes
Yes
Yes
Yes
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
1, 3, 4, 5
1, 3, 4, 5
1, 3, 4, 5
1, 3, 5
1a, 3, 5
480 Volts Δ Primary, 208Y/120 Volts Secondary
15
30
45
75
112.5
3F3Y015XESTP1
3F3Y030XESTP1
3F3Y045XESTP1
3F3Y075XESTP1
3F3Y112XESTP1
6504.00
9008.00
11000.00
16130.00
18000.00
Y
Y
Y
Y
Y
208 Volts Δ Primary, 208Y/120 Volts Secondary
15
30
45
75
112.5
3B3Y015XESTP1
3B3Y030XESTP1
3B3Y045XESTP1
3B3Y075XESTP1
3B3Y112XESTP1
6504.00
9008.00
11000.00
16130.00
18000.00
Y
Y
Y
Y
Y
240 Volts Δ Primary, 208Y/120 Volts Secondary
15
30
45
75
112.5
3C3Y015XESTP1
3C3Y030XESTP1
3C3Y045XESTP1
3C3Y075XESTP1
3C3Y112XESTP1
6504.00
9008.00
11000.00
16130.00
18000.00
Y
Y
Y
Y
Y
Taps (See page 7-11)
Motor Drive Isolation
TRANSFORMERS
7
Three Phase 60HZ Motor Drive Isolation Transformers
KVA
Motor
H.P.
Catalog
Number
7.5
11
15
20
27
34
40
51
3&5
7.5
10
15
20
25
30
40
DT
DT
DT
DT
DT
DT
DT
DT
(
(
(
(
(
(
(
(
)
)
)
)
)
)
)
)
007
011
015
020
027
034
040
051
50
60
75
100
125
150
200
250
300
400
500
600
DT
DT
DT
DT
DT
DT
DT
DT
DT
DT
DT
DT
(
(
(
(
(
(
(
(
(
(
(
(
)
)
)
)
)
)
)
)
)
)
)
)
063
075
093
118
145
175
220
275
330
440
550
660
63
75
93
118
145
175
220
275
330
440
550
660
DT ( ) Code
18
20
21
22
24
30
42
44
45
52
54
Actual
List
Price $
Standard
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
3045.00
5492.00
5008.00
5797.00
6902.00
7659.00
8073.00
9163.00
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
115°
115°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
180°
180°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
10650.00
12130.00
12366.00
13114.00
15537.00
18626.00
23366.00
CSO
CSO
CSO
CSO
CSO
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
2–5%
6.2%
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
FCAN/BN
150°
150°
150°
150°
150°
150°
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Primary Volts
208 Delta
208 Delta
208 Delta
230 Delta
230 Delta
380 Delta
460 Delta
460 Delta
460 Delta
575 Delta
575 Delta
taps may vary based on volts/turn ratio.
outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use. No
charge when requested at time of initial project order.
For
7-12
Secondary Volts
208Y/120
230Y/133
460Y/266
230Y/133
460Y/266
460Y/266
230Y/133
460Y/266
380Y/220
230Y/133
460Y/266
Motor Drive Isolation
Optional Modifications
marked floor and wall can be wall mounted with
optional wall bracket identified with “W” suffix on
catalog number.
Refer selection and application guide for additional
information on horsepower, Ampere, KVA ratings and
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Catalog
Suffix Code
1a. 115° C Rise
1b. 080° C Rise
2. Electrostatic Shield
3. Copper Windings
4. Wall Mounting Brackets
5. Drip Shields/Weather Shields
6. Thermal Switches
(Contact Sales office for List Price)
Items
&
&
&
&
&
&
&
&
F
B
ES
C
W
DS
TS
applications. Standard taps varies with design volts/turn
ratio.
sizes 225 through 660 are available in “RSP”
designs as described on page 7-17.
KVA
Discount Schedule XFMR
Distribution Dry Type Transformers
Sentron Power Centers
Economical Space Saving Package
Siemens Sentron Power Center is a
pre-wired combination of a primary
breaker disconnect, dry type shielded
transformer, secondary breaker
disconnect and a secondary power panel
all in one convenient package.
You save time, space and money by not
having to individually assemble, mount
and wire these components. Simply add
the branch and you’re ready to go.
UL-3R Enclosures
All Sentron Power Center enclosures are
UL-3R listed for indoor and outdoor use.
Transformer Assembly
Siemens totally encapsulated distribution
transformers are designed for general
purpose indoor/outdoor operation.
Sentron Power Centers can be installed
in a wide variety of atmospheric and
environmental conditions. A 180°C, UL
recognized insulation system is used.
Selection
Sentron Power Center units are
electrostatically shielded to provide
transient voltage protection at no
extra cost. All units have 2-5% FCBN
taps.
Panel Assembly
The power panel assembly will
accommodate one-inch, 1, 2 or 3-pole,
common trip, duplex secondary branch
circuit breakers, Type Q and QT as well
as ground fault circuit breakers. Per UL
and NEC requirements, the Sentron
Power Center assembly comes fully
equipped with primary and secondary
main circuit breakers. Branch circuit
breakers can be obtained from our local
distributor once you have established
your branch circuit requirements. All
Sentron Power Centers are UL listed
for service entrance.
Maximum Secondary Circuits
KVA
Catalog
Number
List
Price $
1" Wide
1/2" Wide
2" Wide
120V (1-Pole)
120V (1-Pole)
240V (2-pole)
Interior
Number
Reference
Approximate Dimensions
(in inches)
Height
Width
Depth
Approximate
Net Weight (lbs.)
7.63
11.00
11.00
12.38
13.50
120
160
185
240
330
7.63
12.38
13.38
13.75
255
385
535
680
480 Volts Δ Primary, 240/120 Volts Secondary — Single Phase — Sentron Power Centers
5.0
7.5
10.0
15.0
25.0
1LPC005
1LPC007
1LPC010
1LPC015
1LPC025
4310.00
5082.00
5520.00
6667.00
8412.00
8
8
8
12
20
16
16
16
24
40
4
4
4
6
10
I1224L1100CU
I1224L1100CU
I1224L1100CU
I1224L1125CU
I2440L1200CU
32.13
32.13
34.38
34.38
41.88
13.25
15.88
15.88
17.13
17.88
3LPC009
3LPC015
3LPC022
3LPC030
8404.00
12140.00
13486.00
15310.00
12
12
18
24
24
24
36
42
4
4
6
8
I1836L3200CU
I1836L3200CU
I2442L3200CU
I3042L3200CU
33.75
35.13
38.25
43.75
22.13
22.13
30.25
33.00
TRANSFORMERS
9.0
15.0
22.5
30.0
7
480 Volts Δ Primary, 208Y/120 Volts Secondary — Three Phase — Sentron Power Centers
Circuit Breaker Data for Sentron Power Centers
480 Volts Δ to 280Y/120 Volts — Three Phase
480 Volts to 240/120 Volts — Single Phase
KVA
480 Volts
Primary
Breaker
240/120 Volts
Secondary
Main
Maximum Rating
of Secondary
Breakers
5.0
7.5
10.0
15.0
25.0
ED42B025L
ED42B025L
ED42B035L
ED42B050L
ED42B090L
Q225 (25A)
Q240 (40A)
Q250 (50A)
Q270 (70A)
Q2125 (125A)
20
30
40
60
100
(25A)
(25A)
(35A)
(50A)
(90A)
Primary
breaker has lineside lug for customer
connection.
Single Phase – 18,000 Amps RMS Symmetrical
Interrupting Capacity.
Three Phase – 18,000 Amps RMS Symmetrical
Interrupting Capacity.
Discount Schedule XFMR
Amps
Amps
Amps
Amps
Amps
Sentron
KVA
480 Volts
Primary
Breaker
280Y/120 Volts
Secondary
Main
Maximum Rating
of Secondary
Breakers
9.0
15.0
22.5
30.0
ED43B025L
ED43B040L
ED43B070L
ED43B090L
Q330 (30A)
Q350 (50A)
Q370 (70A)
Q3100 (100A)
25
40
60
80
Power Centers are NEMA 3R for outdoor
application and may be ordered with “SS” suffix for 304
stainless steel enclosure.
Secondary branch breakers are not included and must
be ordered separately.
Primary and secondary main breakers are included and
are factory installed.
(25A)
(40A)
(70A)
(90A)
Amps
Amps
Amps
Amps
ED
frame breakers furnished are rated 18000 AIC and are
sufficient for fault current of transformer. If higher AIC
rating is required by spec, the ED can be changed in the
field to HED 4 (22000 AIC) or HHED6 (65000 AIC).
1LPC005 and 3LPC009 are copper wound.
Available with Stainless Steel NEMA 3R enclosures by
adding catalog number suffix “SS”.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-13
Transformers
NEMA TP1 Energy Efficiency Standard
Single Phase and Three Phase
TP1–Energy Efficient Transformers
Most commercial and industrial facilities
require several low-voltage transformers
to decrease the voltage received from
the utility to the voltages used by various
loads such as lighting, computers and
other electrically operated equipment.
Standard transformers convert approximately 95% of the electricity received
into usable output voltage. Since these
transformers are energized continually,
even a small improvement in efficiency
can provide significant energy savings.
These energy efficient transformers are
specifically designed to help save money
on utility bills and reduce energy waste.
Depending on the size of the transformer,
a “NEMA TP1 compliant” transformer can
save $100-300 each year at an electricity
rate of $0.075 cents per kWh. A typical
large commercial facility will have 6-10 low
voltage transformers, and thus can save
between $600 and $3,000 per year.
Basic Design Characteristics
The TP1 designs include the use of higher
grade electrical steel and other features
designed to lower flux density and reduce
TRANSFORMERS
7
New Super Energy Efficient
Transformers:
TP1S, HM1S & HM2S
TP1S transformer designs surpass the
NEMA TP1 standards for efficiency.
These units are designed not to exceed
115°C temperature rise above a 40°C
ambient under full linear load and not to
exceed 150°C rise under a non-linear
load level of K13 (K20 for HMT units).
Standard features of the TP1S, HM1S,
HM2S units include:
▪ Higher efficiency level with Linear
Load Efficiency: 25% less loss than
NEMA TP-1 from 35% to 65% load @
75°C for sizes 15-750KVA
7-14
losses especially at average 35% loading
where the TP1 measurements apply.
To meet TP1 the design engineer must
consider both the “I square R” losses and
the core or iron loses. Simple de-rating
from a higher kVA will not satisfy the TP1
standards as the efficiency level is
dependent on the combination of core
(no-load) losses and I2R (winding) losses.
The core construction employs the use of
high quality non-aging electrical grade
grain-oriented silicon steel with high
permeability, low hysteresis and low eddy
current losses. These characteristics are
required to achieve the TP1 efficiency
levels. Core laminations must be tightly
assembled enabling magnetic flux
densities to be kept well below the
saturation point.
The core and coil designs must be low
loss type with minimum efficiencies per
NEMA TP1 when operated at 35% of
full load capacity. Efficiency shall be
tested in accordance with NEMA TP2
(Standard test method for measuring
the energy consumption of distribution
transformers). The efficiency levels must
meet the following minimums.
▪ TP1S units are TP1 Rated efficiency
under non-linear loads with a load
profile of K13 at 50% loads @ 75°C
▪ Noise levels are 3 dB lower than
NEMA ST-20
▪ Standard 200% neutral
▪ K13 rating on nameplate (K20 for
HMT units)
▪ Electrostatic shield
▪ Ten year pro-rated warranty with
standard liability limitations same as
Sentron Harmonic Mitigation units
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Selection
TP1- Energy Efficient transformers:
Single
kVA
15
25
37.5
50
75
100
167
250
333
Phase
Efficiency
97.7%
98.0%
98.2%
98.3%
98.5%
98.6%
98.7%
98.8%
98.9%
Three
kVA
15
30
45
75
112.5
150
225
300
500
750
Phase
Efficiency
97.0%
97.5%
97.7%
98.0%
98.2%
98.3%
98.5%
98.6%
98.7%
98.8%
Transformers
Sentron Harmonic Mitigating Transformers (HM1 & HM2)
Description
The Sentron Harmonic Mitigating
Transformers (HMTs) are designed to
meet the needs of modern power
distribution systems that contain a large
percentage of non-linear equipment that
produces harmonics. Some examples of
this type of equipment are computers,
printers, fax machines, scanners, copiers,
uninterruptible power supplies, ballast
and variable frequency drives (VFD).
This type of equipment generates
harmonic voltages and currents because
they contain AC to DC power conversion
rectifiers. Harmonic voltages and
currents can cause a variety of problems
ranging from poor power factor, voltage
distortion, capacitor resonance and motor
failures to overloaded transformers and
conductors.
The Sentron HMTs are specially designed
to operate under high non-linear load
conditions and have the additional benefit
of improving the overall power system
reliability.
Application
Elimination of undesirable harmonics by
using the Siemens Sentron HMTs is an
effective solution to the power quality
problems encountered by today’s power
system professionals. By treating the
harmonics at their source, using
advanced technology, installation
problems can be avoided and overall
system reliability improved. The Sentron
HMT product line provides many far
Design and Construction
Features
The Sentron Harmonic Mitigating
Transformers comply with all applicable
ANSI/IEEE standards including
C57.12.91, C57.96, C57.110, CSA #
C22.2 No. 47 (CUL), UL506, UL1561 as
well as NEMA ST-20. The design life is
25 years at 130 degree C rise, 30 years
at 115C rise and 40 years for 80C rise
models. Approvals and listings include
UL, CSA. with CE approval available
when requested. The Sentron HMTs
have capability up to the load capability
up to K-20, which is achieved by
harmonic cancellations in the secondary
and low flux density design for
protection against heat in place of
design enlargement protection only.
Copper coil windings with full width
copper foil electrostatic shield are
standard and additional shield options
are available for higher noise attenuation
requirements. All HMTs have 130C rise
with optional 115C and 80C winding rise
designs available. All designs include
vacuum impregnated polyester resin
encapsulation of windings and NEMA 3R
enclosures. A neutral sized at 200% of
the ampacity of the secondary phase
conductors for extra protection against
triplens and unbalanced single phase
loads. The Sentron HMT designs have
TP1 energy efficient rating equal to that
of a non K-Factor rated transformer and
have the Energy Star emblem displayed.
Siemens HMT designs have TP1 efficiency levels at 35% load @ ref temp. 75
degree C and also retain TP1 efficiency
levels at 65% load @ reference
temperature 85C. A ten-year pro-rated
warranty with standard liability
limitations applies to all Sentron HMTs.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-15
TRANSFORMERS
Benefits
Selection
reaching benefits such as lower
operating cost, improved operating
efficiency, reduced down-time due to
outages caused by nuisance tripping,
and increased equipment life due to
low voltage distortions.
7
One of the most effective ways to
eliminate power system harmonics is to
use a technique known as “phase
shifting.” In this method power system
harmonics are eliminated by pairing
together harmonics that have 180°
relative angular displacement, which
causes them to cancel one another out.
This can be accomplished by a variety
of means:
Single Output Harmonic
Mitigating Transformer
(0° or -30° primary-secondary
angular displacement)
The primary of this transformer has a
delta connection and its secondary has
a special double winding connection.
Although there is only one secondary
three phase output, the 3rd, 9th and 15th
harmonic currents are prevented from
circulating in the primary windings by
canceling their magnetic fluxes at low
impedance with the double winding
secondary, reducing voltage distortions
to the loads.
When two transformers with this
type of connection, 0° and -30°
displacement, are used in parallel,
the 3rd, 9th and 15th harmonic currents
are canceled as previously described,
and additionally the 5th and 7th harmonic
currents are cancelled in the electrical
supply common to both transformers
due to their relative 30° phase shift.
If a single harmonic mitigating
transformer (0°) is used in an existing
or new system utilizing standard
delta-wye transformers (-30°), the 5th
and 7th harmonic currents originating
from the HMT transformer (0°) will
attempt to cancel the 5th and 7th
harmonic currents originating from the
standard delta-wye transformer (-30°).
This reduces the overall 5th and 7th
harmonics present in the system, with
the actual reduction dependent on the
magnitudes of the secondary loads.
Double-Output Harmonic Mitigating
Transformer (0° and -30°, -15° and -45°,
or +15°and -15° primary-secondary
angular displacement)
The primary of this transformer has a
delta connection and its secondary has
double-output, special double winding
connections with 30° phase shift
between outputs. This arrangement
cancels the 3rd, 5th, 7th, 9th, and 15th
harmonics at very low impedance
on the secondary side. This greatly
improves voltage distortion for the
loads and the primary power factor.
The advantage of this arrangement
is that the reductions of harmonic
currents are achieved with one
transformer creating a 12 pulse load.
If two of these transformers are used,
with the primaries of each phase
shifted 15° with respect to one
another, then cancellation of harmonics
up to the 19th are achievable creating
a 24 pulse load.
Transformers
Sentron Harmonic Mitigating Transformers (HM1 & HM2)
TRANSFORMERS
7
Catalog Number Coding:
Single output (1 secondary) = HM1,
Double output (2 secondaries) = HM2.
Phase Shift Options: HM1 followed by > (00) or (30) degree.
HM2 > (03) for 0 & 30 or (15) for 15 & 45 degree lagging,
or (PN15) =15 pos & 15 neg.
HMT, 480 Volt Primary 120/208 Volt Secondary (3F3) - 130C
(standard), 115C and 80C Winding Rise displayed on this page.
130C (std.) Rise HMT List
KVA Catalog Number
Price $
햲
15
3F3Y015GHM100
햲
15
3F3Y015GHM130
햲
15
3F3Y015GHM203
햲
15
3F3Y015GHM215
햲
15
3F3Y015GHM2PN15
햲
30
3F3Y030GHM100
햲
30
3F3Y030GHM130
햲
30
3F3Y030GHM203
햲
30
3F3Y030GHM215
햲
30
3F3Y030GHM2PN15
햲
45
3F3Y045GHM100
햲
45
3F3Y045GHM130
햲
45
3F3Y045GHM203
햲
45
3F3Y045GHM215
햲
45
3F3Y045GHM2PN15
햲
75
3F3Y075GHM100
햲
75
3F3Y075GHM130
햲
75
3F3Y075GHM203
햲
75
3F3Y075GHM215
햲
75
3F3Y075GHM2PN15
햲
112.5 3F3Y112GHM100
햲
112.5 3F3Y112GHM130
햲
112.5 3F3Y112GHM203
햲
112.5 3F3Y112GHM215
햲
112.5 3F3Y112GHM2PN15
햲
150
3F3Y150GHM100
햲
150
3F3Y150GHM130
햲
150
3F3Y150GHM203
햲
150
3F3Y150GHM215
햲
150
3F3Y150GHM2PN15
햲
225
3F3Y225GHM100
햲
225
3F3Y225GHM130
햲
225
3F3Y225GHM203
햲
225
3F3Y225GHM215
햲
225
3F3Y225GHM2PN15
햲
300
3F3Y300GHM100
햲
300
3F3Y300GHM130
햲
300
3F3Y300GHM203
햲
300
3F3Y300GHM215
햲
300
3F3Y300GHM2PN15
햲
500
3F3Y500GHM100
햲
500
3F3Y500GHM130
햲
500
3F3Y500GHM203
햲
500
3F3Y500GHM215
햲
500
3F3Y500GHM2PN15
115C Rise HMT
Catalog Number
3F3Y015FHM100
3F3Y015FHM130
3F3Y015FHM203
3F3Y015FHM215
3F3Y015FHM2PN15
3F3Y030FHM100
3F3Y030FHM130
3F3Y030FHM203
3F3Y030FHM215
3F3Y030FHM2PN15
3F3Y045FHM100
3F3Y045FHM130
3F3Y045FHM203
3F3Y045FHM215
3F3Y045FHM2PN15
3F3Y075FHM100
3F3Y075FHM130
3F3Y075FHM203
3F3Y075FHM215
3F3Y075FHM2PN15
3F3Y112FHM100
3F3Y112FHM130
3F3Y112FHM203
3F3Y112FHM215
3F3Y112FHM2PN15
3F3Y150FHM100
3F3Y150FHM130
3F3Y150FHM203
3F3Y150FHM215
3F3Y150FHM2PN15
3F3Y225FHM100
3F3Y225FHM130
3F3Y225FHM203
3F3Y225FHM215
3F3Y225FHM2PN15
3F3Y300FHM100
3F3Y300FHM130
3F3Y300FHM203
3F3Y300FHM215
3F3Y300FHM2PN15
3F3Y500FHM100
3F3Y500FHM130
3F3Y500FHM203
3F3Y500FHM215
3F3Y500FHM2PN15
Optional Modifications Table for HMTs
Sound Level
A
LN3= (3dB below NEMA standard)
B
LN5= (5dB below NEMA standard)
Attenuation—Single shield—60dB Common Mode Std.
C
ES2= Double shield—80dB Common Mode >
D
ES3= Double shield & TVSS—120dB Common >
Filtering & Attenuation
E
TV= Secondary side TVSS (90kA Standard)
with common mode noise attenuation
F
TB= Terminal Block
G
S= Super Energy Efficient (HM1S & HM2S)
햲
List
Price $
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
Selection
HMTs are also available with 480 - 277/480 (3F5), 208–120/208
(3B3), 208–277/480 (3B5).
Standard Features Include:
▪ K-13 Load profile rating.
▪ TP1 Efficiencies @ 35% and 65% load.
▪ (C) Copper windings.
▪ (ES) Electrostatic shield.
▪ 130 C Winding rise.
80C Rise HMT
Catalog Number
3F3Y015BHM100
3F3Y015BHM130
3F3Y015BHM203
3F3Y015BHM215
3F3Y015BHM2PN15
3F3Y030BHM100
3F3Y030BHM130
3F3Y030BHM203
3F3Y030BHM215
3F3Y030BHM2PN15
3F3Y045BHM100
3F3Y045BHM130
3F3Y045BHM203
3F3Y045BHM215
3F3Y045BHM2PN15
3F3Y075BHM100
3F3Y075BHM130
3F3Y075BHM203
3F3Y075BHM215
3F3Y075BHM2PN15
3F3Y112BHM100
3F3Y112BHM130
3F3Y112BHM203
3F3Y112BHM215
3F3Y112BHM2PN15
3F3Y150BHM100
3F3Y150BHM130
3F3Y150BHM203
3F3Y150BHM215
3F3Y150BHM2PN15
3F3Y225BHM100
3F3Y225BHM130
3F3Y225BHM203
3F3Y225BHM215
3F3Y225BHM2PN15
3F3Y300BHM100
3F3Y300BHM130
3F3Y300BHM203
3F3Y300BHM215
3F3Y300BHM2PN15
3F3Y500BHM100
3F3Y500BHM130
3F3Y500BHM203
3F3Y500BHM215
3F3Y500BHM2PN15
List
Price $
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
햲
Adder
to Base $
CSO
CSO
CSO
CSO
CSO
CSO
CSO
List Price
Adder $
Thermal Sensors 170° C= (TS7), 185° C= (TS8) or 200° C= (TS0)
H
TS7 = 1 sensor center coil
H
TS72 = 2 sensors center coil
H
TS76 = 6 sensors, (2) on each coil
H
TS8 = 1 sensor center coil
H
TS82 = 2 sensors center coil
H
TS86 = 6 sensors, (2) on each coil
H
H
H
TS0 = 1 sensor center coil
TS02 = 2 sensors center coil
TS06 = 6 sensors, (2) on each coil
Contact Sales Office for pricing.
7-16
Secondary Configuration Enclosure Optional HMT
Outputs Phase Shift
Style
Modifications
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented A,B,C,D,E,F,G,H
1
30 Deg Lagging
Vented A,B,C,D,E,F,G,H
2
0 & 30 Lagging
Vented A,B,C,D,E,F,G,H
2
15 & 45 Lagging Vented A,B,C,D,E,F,G,H
2
15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H
1
Zero Degree
Vented C,D,E,F,G,H
1
30 Deg Lagging
Vented C,D,E,F,G,H
2
0 & 30 Lagging
Vented C,D,E,F,G,H
2
15 & 45 Lagging Vented C,D,E,F,G,H
2
15 Pos & 15 Neg Vented C,D,E,F,G,H
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
CSO
CSO
CSO
CSO
CSO
CSO
CSO
CSO
CSO
Reduced Size Transformers
Three Phase
Selection
Sentron Reduced Size Plus
(RSP)
The “Sentron Reduced Size Plus” is ideal
for locations with limited equipment
space. This product is specifically
designed for easier installation with
sufficiently sized bus and all around
access for cable entry from bottom,
lower back or sides. The rodent proof
grillwork at the bottom slides up for
insertion of forks or pallet jack for easy
positioning. The RSP has 3-phase
shunt-trip activated disconnect installed
on the primary side and a safety alarm
feature which operates automatically if
the coils overheat due to severe load or
in case of failure as life expectancy is
reached. The “RSP” is a dry type
transformer with fan assisted cooling
activated by thermal sensors only when
needed for peak periods and heavy
loading. The RSP system incorporates
dry contacts to indicate 3 different
temperature levels for customers
wishing to monitor the transformer
remotely. Audible noise insulation
barriers are factory installed inside of
the enclosure for quieter operation for
average applications. The “Sentron
Reduced Size Plus” is available with
copper or aluminum windings in 150C,
115C or 80C rise as well as K-Factor,
electrostatic shielding and TP1 efficiency
ratings.
Features:
7
▪ Approximately 30% smaller and 40%
lighter
▪ Built to NEMA ST-20 standards, IEEE
C57 and UL Listed
▪ 3-phase disconnect switch factory
installed on primary. Protection from
overheating with shunt trip device.
▪ Easy connection to LV lug landing pads
▪ Lugs provided on disconnect for HV
connections to disconnect
▪ Cable entrance from lower back, sides
or bottom
▪ Quiet operation for average
applications; 2 dB below NEMA std.
▪ Thermal switches activate (Fans)
@125˚C, (Alarm) @190˚C and
(Disconnect) @200˚C.
▪ Greater efficiency than standard models
▪ Dry contacts for remote monitoring
connections
▪ Same distance to wall as standard
units
▪ Front access for easy maintenance
▪ Enclosure is rodent proof by design
▪ Audible safety alarm to signal
overheating
▪ NEMA 3R with weather shields added
▪ Energy efficient NEMA-TP1 designs
TRANSFORMERS
Sizes Available:
150-1000 KVA.
SMALLER
LIGHTER
QUIETER
ENERGY EFFICIENT
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-17
Warehouse Stock Transformers
Type QST [Standard Units]
Catalog
Number
KVA
List
Price $
Selection
Taps
Temperature
Rise
Insulation
Mounting
Type
Drip Shield
Required
Enclosure
Style
Single Phase
240 ⴒ 480 Volts Primary, 120/240 Volts Secondary
.05
.075
.10
.15
.25
.50
.75
1.0
1.5
2.0
3.0
5.0
7.5
10
15
25
37.5
50
75
100
167
1D1N555QST
1D1N775QST
1D1N110QST
1D1N115QST
1D1N205QST
1D1N505QST
1D1N705QST
98.00
114.00
114.00
163.00
164.00
255.00
381.00
N
N
N
N
N
N
N
115°
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
None
None
None
None
None
None
None
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
1D1N001QST
1D1N105QST
1D1N002QST
1D1N003QST
1D1N005QST
1D1N007QST
1D1N010QST
1D1N015QST
380.00
552.00
631.00
769.00
968.00
1405.00
1603.00
1868.00
N
N
N
N
N
N
N
N
115°
115°
115°
115°
115°
115°
115°
115°
C
C
C
C
C
C
C
C
180°
180°
180°
180°
180°
180°
180°
180°
C
C
C
C
C
C
C
C
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
None
None
None
None
None
None
None
None
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
Encapsulated
5283.00
6720.00
7737.00
10254.00
21106.00
32804.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
Floor
Floor
Floor
Floor
Floor
Floor
DSK11Q
DSK12Q
DSK12Q
DSK12Q
DSK15Q
DSK15Q
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
None
None
None
Encapsulated
Encapsulated
Encapsulated
1D1Y025TP1QST
1D1Y037TP1QST
1D1Y050TP1QST
1D1Y075TP1QST
1D1Y100TP1QST
1D1Y167TP1QST
&
&
&
&
Wall
Wall
Wall
Wall
Three Phase
480 Volts Δ Primary, 208Y/120 Volts Secondary
3
6
9
3F3R003QST
3F3R006QST
3F3R009QST
TRANSFORMERS
7
15
30
45
75
112.5
150
225
300
500
3F3Y015TP1QST
3F3Y030TP1QST
3F3Y045TP1QST
3F3Y075TP1QST
3F3Y112TP1QST
3F3Y150TP1QST
3F3Y225RTP1QST
3F3Y300RTP1QST
3F3Y500RTP1QST
1807.00
1899.00
2735.00
R
R
R
115° C
115° C
115° C
180° C
180° C
180° C
Wall
Wall
Wall
4246.00
6468.00
6494.00
9244.00
11607.00
15472.00
24774.00
34349.00
54933.00
Y
Y
Y
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
150°
150°
150°
220°
220°
220°
220°
220°
220°
220°
220°
220°
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
DSK31Q
DSK11Q
DSK11Q
DSK12Q
DSK12Q
DSK34Q
DSK15Q
DSK36Q
DSK37Q
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Floor
Floor
Floor
Floor
Floor
Floor
&
&
&
&
Wall
Wall
Wall
Wall
DSK31Q
DSK11Q
DSK11Q
DSK12Q
DSK12Q
DSK34Q
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
Ventilated
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Three Phase
480 Volts Δ Primary, 240 Volts Δ Secondary With 120 Volt Tap On B Phase
15
30
45
75
112.5
150
3F1Y015TP1QST
3F1Y030TP1QST
3F1Y045TP1QST
3F1Y075TP1QST
3F1Y112TP1QST
3F1Y150TP1QST
4204.00
6562.00
6648.00
9606.00
13152.00
15852.00
Y
Y
Y
Y
Y
Y
150°
150°
150°
150°
150°
150°
C
C
C
C
C
C
220°
220°
220°
220°
220°
220°
C
C
C
C
C
C
Taps
Description
Designation
4–3% (2 FCAN, 2 FCBN)
2–3.5% (1 FCAN, 1 FCBN)
3–5% (1 FCAN, 2 FCBN)
None
2–5% FCBN
2–5% (1 FCAN, 1 FCBN)
4–2.5% (2 FCAN, 2 FCBN)
2–2.5% FCBN
4–2.5% FCBN
6–2.5% (2 FCAN, 4 FCBN)
J
K
M
N
R
S
T
U
X
Y
Actual
taps are shown for warehouse stock transformers.
designations for units having standard features.
outdoor application. Ventilated transformers
requiring drip shields are UL listed for outdoor use.
Encapsulated transformers are UL listed for indoor/
outdoor use.
Wall
Reduced
capacity 1-phase tap—5% of rated KVA
(2.5% on each side of lighting tap).
For
7-18
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
= Warehouse Stock
Discount Schedule XFMR
Warehouse Stock Transformers
Type QST and Buck-Boost Transformers
Selection
Encapsulated, Indoor/Outdoor Enclosure, 115° C Rise
120 ⴒ 240 Volts — 12/24 Volts,
60 Hz, No Taps, Wall Mounted
120 ⴒ 240 Volts — 16/32 Volts,
60 Hz, No Taps, Wall Mounted
240 ⴒ 480 Volts — 24/48 Volts,
60 Hz, No Taps, Wall Mounted
Catalog
Number
KVA
List
Price $
Catalog
Number
KVA
List
Price $
Catalog
Number
KVA
List
Price $
050BB1224Q
100BB1224Q
150BB1224Q
205BB1224Q
505BB1224Q
705BB1224Q
1BB1224Q
105BB1224Q
2BB1224Q
3BB1224Q
5BB1224Q
.050
.100
.150
.250
.500
.750
1.00
1.50
2.00
3.00
5.00
241.00
278.00
334.00
391.00
539.00
688.00
890.00
1077.00
1318.00
1763.00
2525.00
050BB1632Q
100BB1632Q
150BB1632Q
205BB1632Q
505BB1632Q
705BB1632Q
1BB1632Q
105BB1632Q
2BB1632Q
3BB1632Q
5BB1632Q
.050
.100
.150
.250
.500
.750
1.00
1.50
2.00
3.00
5.00
241.00
278.00
334.00
391.00
539.00
688.00
890.00
1077.00
1318.00
1763.00
2525.00
050BB2448Q
100BB2448Q
150BB2448Q
205BB2448Q
505BB2448Q
705BB2448Q
1BB2448Q
105BB2448Q
2BB2448Q
3BB2448Q
5BB2448Q
.050
.100
.150
.250
.500
.750
1.00
1.50
2.00
3.00
5.00
278.00
334.00
372.00
447.00
613.00
780.00
983.00
1188.00
1448.00
1763.00
3694.00
Accessories
Dripshield/Weathershield Kits for Type QST Ventilated Transformers
Single Phase
Three Phase
Single Phase
Three Phase
Single Phase
Three Phase
Catalog
Number
150˚C Rise & TP1
150˚C Rise & TP1
115˚C Rise & TP1
115˚C Rise & TP1
80˚C Rise & TP1
80˚C Rise & TP1
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
Nameplate
Ref. #
DSK11Q
DSK12Q
DSK34Q
DSK15Q
DSK36Q
DSK37Q
DSK31Q
DSK38Q
25
37.5, 50, 75
—
100, 167
—
—
—
—
30, 45
75, 112.5
150
225
300
500
15
750, 1000
—
25, 37.5, 50
—
75, 100
—
—
—
—
30
45, 75
112.5
150
225
300
15
500, 750
—
25, 37.5
—
50, 75, 100
—
—
—
—
15, 30
45, 75
—
112.5, 150
—
—
—
500
4317G05
4317G06
4317G07
4317G08
4317G09
4317G10
4317G11
4317G67
Wall Mounting Brackets for Type QST Ventilated Transformers
Catalog
Number
WMB42Q
WMB43Q
Single Phase
Three Phase
Single Phase
Three Phase
Single Phase
Three Phase
150˚C Rise & TP1
150˚C Rise & TP1
115˚C Rise & TP1
115˚C Rise & TP1
80˚C Rise & TP1
80˚C Rise & TP1
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
KVA Sizes
25
37.5, 50
15, 30, 45
75
—
25, 37.5
15, 30
45
—
25
15, 30
45
Terminal Lug Kits For Ventilated Transformers
TLK32Q
TLK11Q
—
25, 37.5
TLK13Q
75
TLK33Q
—
TLK12Q
Three Phase
KVA Sizes
List
Price $
65.00
Terminal Lug
Qty.
Terminal Lug
Cable
Range
Qty.
14awg-1/0mcm n/a
Hardware Included
7
141.00
127.00
7
8
KA29U/TA250 6awg-250mcm
KA29U/TA250 6awg-250mcm
n/a
n/a
—
75
279.00
12
KA29U/TA250 6awg-250mcm
n/a
243.00
3
KA29U/TA250 6awg-250mcm
8
KA31U/TA350 6awg-350mcm 3, 8
(3) 5/16" x 1 1/2"
50
—
191.00
4
KA29U/TA250 6awg-250mcm
4
KA31U/TA350 6awg-350mcm
8
(8) 3/8" x 1 1/2"
3/8" x 1 1/2"
3/8" x 1 1/2"
15
30, 45
—
Lug No.
Cable
Range
Lug No.
KA25U/TA0
Qty. Bolt Size
7
1/4" x 1"
7
8
12
5/16" x 1 1/2"
5/16" x 1 1/2"
5/16" x 1 1/2"
TLK34Q
—
112.5
243.00
11
KA31U/TA350 6awg-350mcm
n/a
11
TLK36Q
—
225
459.00
22
KA31U/TA350 6awg-350mcm
n/a
22
3/8" x 1 1/2"
TLK35Q
—
150
396.00
3
KA31U/TA350 6awg-350mcm
8
KA34U/TA500 4awg-500mcm
11
3/8" x 1 1/2"
TLK37Q
—
300
638.00
6
KA31U/TA350 6awg-350mcm
16
KA34U/TA500 4awg-500mcm
22
3/8" x 1 1/2"
TLK15Q
167
—
562.00
8
KA31U/TA350 6awg-350mcm
12
KA34U/TA500 4awg-500mcm
20
3/8" x 1 1/2"
TLK38Q
—
500
1150.00
9
KA31U/TA350 6awg-350mcm
24
KA34U/TA500 4awg-500mcm
33
3/8" x 1 1/2"
TLK14Q
100
—
279.00
12
KA31U/TA350 6awg-350mcm
n/a
TLK39Q
—
750
1430.00
12
KA31U/TA350 6awg-350mcm
28
These
accessories fit only warehouse stock transformers
with QST Catalog Suffix.
Listed for indoor and outdoor use with
dripshield installed.
UL
Discount Schedule XFMR
May
be used on “QST” suffix units and “non QST”
suffix transformers. Terminal lugs are screw type, lug
connectors suitable for both copper and aluminum
cable. TA lugs are single barrel, AU lugs are double
barrel. Each barrel is suitable for cable range shown.
Lugs are rated 90° C
KA34U/TA500 4awg-500mcm
Lug
12
3/8" x 1 1/2"
40
3/8" x 1 1/2"
kit contains quantity required for each transformer.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-19
TRANSFORMERS
Single Phase
KVA Sizes
—
7
Catalog
Number
TLK31Q
Warehouse Stock Transformers
Warehouse Stock
TRANSFORMERS
7
Application
The Buck-Boost Transformer has four separate windings, two-windings in the primary
and two-windings in the secondary. The unit
is designed for use as an insulating transformer or as an autotransformer. As an autotransformer the unit can be connected to
Buck (decrease) or Boost (increase) a supply
voltage. When connected in either the Buck
or Boost mode, the unit is no longer an
insulating transformer but is an autotransformer. Units are designed for 60Hz applications.
Autotransformers are more economical
and physically smaller than equivalent twowinding transformers and are designed to
carry the same function as two-winding
transformers, with the exception of isolating
two circuits. Since autotransformers may
transmit line disturbances directly, they may
be prohibited in some areas by local building
codes. Before applying them, care should
be taken to assure that they are acceptable
according to local code.
NOTE: Autotransformers are not used in
closed delta connections as they introduce
into the circuit a phase shift which makes
them uneconomical.
As insulating transformers these units can
accommodate a high voltage of 120, 240
or 480 volts. For units with two 12 volt
secondaries, two 16 volt secondaries, or
two 24 volt secondaries, the output can be
wired for either secondary voltage, or for
3-wire secondary. The unit is rated (KVA) as
any conventional transformer.
Operation
Electrical and electronic equipment is
designed to operate on a standard supply
voltage. When the supply voltage is constantly too high or too low, (usually greater
than ± 5%), the equipment fails to operate
at maximum efficiency. A Buck-Boost
transformer is a simple and economical
7-20
Selection
means of correcting this off-standard
voltage up to ± 20%. A Buck-Boost
transformer will NOT, however, stabilize
a fluctuating voltage. Buck-Boost
transformers are suitable for use in a three
phase autotransformer bank in either
direction to supply 3-wire loads. They are
also suitable for use in a three phase
autotransformer bank which provides a
neutral return for unbalanced current. They
are NOT suitable for use in a three phase
autotransformer bank to supply a 4-wire
unbalanced load when the source is a
3-wire circuit.
Construction
Buck-Boost Transformers are contained
within a NEMA 3R, non-ventilated weatherproof enclosure. Wiring compartments
are located at the bottom. Core and coil
assemblies are encapsulated. Insulation
system temperature is 180˚ C and the
winding temperature rise is 115˚ C. Coils
are copper wound through 3 kva.
How To Select The Proper
Transformer
To select the proper Transformer for BuckBoost applications, determine:
1. Input line voltage — The voltage that you
want to buck (decrease) or boost
(increase). This can be found by
measuring the supply line voltage with a
voltmeter.
2. Load voltage — The voltage at which
your equipment is designed to operate.
This is listed on the nameplate of the load
equipment.
3. Load KVA or Load Amps — You do not
need to know both — one or the other is
sufficient for selection purposes. This
information usually can be found on the
nameplate of the equipment that you
want to operate.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
4. Number of phases — Single or three
phase line and load should match
because a transformer is not capable of
converting single to three phase. It is
however a common application to make
a single phase transformer connection
from a three phase supply by use of one
leg of the three phase supply circuit. Care
must always be taken not to overload the
leg of the three phase supply. This is particularly true in a Buck-Boost application
because the supply must provide for the
load KVA, not just the nameplate rating of
the Buck-Boost transformer.
5. Frequency — The supply line frequency
must be the same as the frequency of
the equipment to be operated — either
50 or 60 cycles.
How To Use Selection Charts
1. Choose the selection table with the
correct number of phases for single or
three phase applications.
2. Line/Load voltage combinations are listed
across the top of the selection table.
Select a line/load voltage combination
which comes closest to matching your
applications.
3. Follow the selected column down until
you find either the KVA or load amps of
your application. If you do not find the
exact value, go on the next highest
rating.
4. Now follow across the table to the far
left-hand side to find the catalog number
and the KVA of the transformer you need.
5. Follow the column of your line/load voltage to the bottom to find the connection
diagram for this application.
NOTE: Connection diagrams show low
voltage and high voltage connection terminals. Either can be input or output
depending on Buck or Boost application.
6. In the case of three phase loads either
wo or three single phase transformers
are required as indicated in the “quantity
required” line at the bottom of the table.
The selection is dependent on whether a
Wye connected bank of three transformers with a neutral is required or whether
an open Delta connected bank of two
ransformers for a Delta connected load
will be suitable.
7. For line/load voltage not listed on the
selection tables, use the pair listed on the
table that is slightly above your application for reference. Then apply the first
formula at the bottom of the table to
determine “new” output voltage. The
new KVA rating can be found using the
second formula.
Warehouse Stock Transformers
Buck-Boost
Selection
120 ⴒ 240 Volts Primary — 12/24 Volts Secondary, 60 Hz, No Taps, Wall Mounted
Single Phase — Table 1
Boosting
Bucking
Catalog
Number
Line Voltage
(Available)
96
100
105
109
189
208
215
220
125
132
229
245
250
252
Insulating
Transformer
Rating
Load Voltage
(Output)
115
120
115
120
208
229
237
242
114
120
208
222
227
240
050BB1224Q
.050 KVA
Load
KVA
Amps
.24
2.08
.25
2.08
.50
4.17
.50
4.17
.43
2.08
.48
2.08
.49
2.08
.50
2.08
.52
4.59
.55
4.59
.48
2.29
.51
2.29
.52
2.29
1.05
4.38
100BB1224Q
.100 KVA
Load
KVA
Amps
.48
4.17
.50
4.17
.96
8.33
1.00
8.33
.87
4.17
.95
4.17
.99
4.17
1.01
4.17
1.04
9.16
1.10
9.16
.95
4.58
1.02
4.58
1.04
4.58
2.10
8.75
150BB1224Q
.150 KVA
Load
KVA
Amps
.72
6.25
.75
6.25
1.44
12.50
1.50
12.50
1.30
6.25
1.43
6.25
1.48
6.25
1.51
6.25
1.55
13.75
1.65
13.75
1.43
6.88
1.53
6.88
1.56
6.88
3.15
13.13
205BB1224Q
.250 KVA
Load
KVA
Amps
1.19
10.42
1.25
10.42
2.40
20.83
2.50
20.83
2.17
10.42
2.38
10.42
2.47
10.42
2.52
10.42
2.60
22.92
2.75
22.92
2.38
11.46
2.54
11.46
2.60
11.46
5.25
21.88
505BB1224Q
.500 KVA
Load
KVA
Amps
2.37
20.83
2.50
20.83
4.80
41.67
5.00
41.67
4.33
20.83
4.77
20.83
4.94
20.83
5.04
20.83
5.18
45.83
5.50
45.83
4.77
22.92
5.09
22.92
5.20
22.92
10.50
43.75
705BB1224Q
.750 KVA
Load
KVA
Amps
3.56
31.25
3.75
31.25
7.19
62.50
7.50
62.50
6.50
31.25
7.15
31.25
7.41
31.25
7.56
31.25
7.77
68.75
8.25
68.75
7.15
34.38
7.63
34.38
7.80
34.38
15.75
65.63
1BB1224Q
1.00 KVA
Load
KVA
Amps
4.75
41.67
5.00
41.67
9.58
83.33
10.00
83.33
8.67
41.67
9.53
41.67
9.88
41.67
10.08
41.67
10.36
91.66
11.00
91.66
9.53
45.83
10.17
45.83
10.40
45.83
21.00
87.50
105BB1224Q
1.50 KVA
Load
KVA
Amps
7.13
62.50
7.50
62.50
14.38
125.00
15.00
125.00
13.00
62.50
14.30
62.50
14.81
62.50
15.13
62.50
15.54
137.50
16.50
137.50
14.30
68.75
15.26
68.75
15.61
68.75
31.50
131.25
2BB1224Q
2.00 KVA
Load
KVA
Amps
9.50
83.33
10.00
83.33
19.17
166.66
20.00
166.66
17.33
83.33
19.07
83.33
19.75
83.33
20.17
83.33
20.72
183.33
22.00
183.33
19.07
91.66
20.35
91.66
20.81
91.66
42.00
175.00
3BB1224Q
3.00 KVA
Load
KVA
Amps
14.25
15.00
125.00 125.00
28.75
250.00
30.00
250.00
26.00
125.00
28.60
125.00
29.63
125.00
30.25
125.00
31.08
275.00
33.00
275.00
28.60
137.50
30.53
137.50
31.21
137.50
63.00
262.50
5BB1224Q
5.00 KVA
Load
KVA
Amps
23.75
25.00
208.33 208.33
47.92
416.66
50.00
416.66
43.33
208.33
47.67
208.33
49.37
208.33
50.42
208.33
51.79
458.33
55.00
458.33
47.67
229.17
50.88
229.17
52.02
229.17
105.00
437.50
Connection Diagram (pg. 7-24)
B
B
B
A
A
D
D
D
D
A
A
D
D
C
Three Phase — Table 2
Boosting
Catalog
Number
Line Voltage
(Available)
189Y/
109
195Y/
113
200Y/
115
208Y/
120
416Y/
240
416Y/
240
189
208
220
218
229
250
255
264
Insulating
Transformer
Rating
Load Voltage
(Output)
208Y/
120
234Y/
135
240Y/
139
229Y/
132
458Y/
264
437Y/
252
208
229
242
208
208
227
232
240
Bucking
KVA
Amps
1.50
4.17
.84
2.08
.86
2.08
1.65
4.17
1.65
2.08
3.15
4.17
.75
2.08
.83
2.08
.87
2.08
1.58
4.39
.83
2.29
.90
2.29
.92
2.29
.95
2.29
100BB1224Q
.100 KVA
Load
KVA
Amps
3.00
8.33
1.69
4.17
1.73
4.17
3.30
8.33
3.30
4.17
6.29
8.33
1.50
4.17
1.65
4.17
1.75
4.17
3.15
8.75
1.65
4.58
1.80
4.58
1.84
4.58
1.90
4.58
150BB1224Q
.150 KVA
Load
KVA
Amps
4.50
12.50
2.54
6.25
2.60
6.25
4.96
12.50
4.96
6.25
9.44
12.50
2.26
6.25
2.48
6.25
2.62
6.25
4.73
13.13
2.48
6.88
2.71
6.88
2.76
6.88
2.86
6.88
205BB1224Q
.250 KVA
Load
KVA
Amps
7.50
20.83
4.22
10.42
4.33
10.42
8.30
20.83
8.25
10.42
15.75
20.83
3.75
10.42
4.13
10.42
4.37
10.42
7.88
21.88
4.13
11.46
4.50
11.46
4.61
11.46
4.76
11.46
505BB1224Q
.500 KVA
Load
KVA
Amps
15.01
41.67
8.44
20.83
8.66
20.83
16.60
41.67
16.50
20.83
31.50
41.67
7.50
20.83
8.26
20.83
8.73
20.83
15.76
43.75
8.26
22.92
9.01
22.92
9.21
22.92
9.53
22.92
705BB1224Q
.750 KVA
Load
KVA
Amps
22.52
62.50
12.67
31.25
12.99
31.25
24.90
62.50
24.75
31.25
47.25
62.50
11.26
31.25
12.39
31.25
13.10
31.25
23.64
65.63
12.39
34.38
13.52
34.38
13.82
34.38
14.29
34.38
1BB1224Q
1.00 KVA
Load
KVA
Amps
30.02
83.33
16.89
41.67
17.32
41.67
33.20
83.33
33.00
41.67
63.00
83.33
15.01
41.67
16.51
41.67
17.47
41.67
31.52
87.50
16.51
45.83
18.02
45.83
18.42
45.83
19.05
45.53
105BB1224Q
1.50 KVA
Load
KVA
Amps
45.03
125.00
25.33
62.50
25.98
62.50
49.80
125.00
49.50
62.50
94.50
125.00
22.52
62.50
24.77
62.50
26.20
62.50
47.28
131.25
24.77
68.75
27.03
68.75
27.63
68.75
28.53
68.75
2BB1224Q
2.00 KVA
Load
KVA
Amps
60.06
166.67
33.77
83.33
34.64
83.33
66.40
166.67
66.00
83.33
126.00
166.66
30.02
83.33
33.03
83.33
34.93
83.33
63.05
175.00
33.03
91.67
36.04
91.67
36.84
91.67
38.11
91.67
3BB1224Q
3.00 KVA
Load
KVA
Amps
90.07
50.66
250.00 125.00
51.96
125.00
99.59
250.00
99.00
125.00
189.00
250.00
45.03
125.00
49.54
125.00
52.39
125.00
94.57
262.50
49.54
137.50
54.06
137.50
55.25
137.50
57.16
137.50
5BB1224Q
5.00 KVA
Load
KVA
Amps
150.11
84.44
416.67 208.33
86.60
208.33
165.99
416.67
165.00
208.33
318.00
416.66
75.05
208.33
82.56
208.33
87.32
208.33
157.62
437.50
82.56
229.17
90.10
229.17
92.09
229.17
95.26
229.17
Quantity Required
3
3
3
3
3
3
2
2
2
2
2
2
2
2
Connection Diagram (pg. 7-24)
F
E
E
F
J
K
G
G
G
H
G
G
G
G
= Warehouse Stock
• Output voltage for lower input voltage can be found by:
Rated Output Voltage ⴒ Input Actual Voltage = Output New Voltage.
Rated Input Voltage
• Output KVA available at reduced input voltage can be found by:
Actual Input Voltage
Rated Input Voltage
ⴒ Output KVA = New KVA Rating.
• Inputs and outputs may be reversed
without affecting KVA capacity. See
note on page 7-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-21
TRANSFORMERS
Load
7
050BB1224Q
.050 KVA
Warehouse Stock Transformers
Buck-Boost
Selection
120 ⴒ 240 Volts Primary — 16/32 Volts Secondary, 60 Hz, No Taps, Wall Mounted
TRANSFORMERS
7
Single Phase — Table 3
Boosting
Bucking
Catalog
Number
Line Voltage
(Available)
95
100
105
208
215
215
220
225
135
240
240
245
250
255
Insulating
Transformer
Rating
Load Voltage
(Output)
120
113
119
236
244
229
235
240
120
212
225
230
234
239
050BB1632Q
.050 KVA
Load
KVA
Amps
.19
1.56
.36
3.12
.37
3.12
.37
1.56
.38
1.56
.72
3.12
.73
3.12
.73
3.12
.42
3.54
.37
1.77
.75
3.33
.77
3.33
.78
3.33
.80
3.33
100BB1632Q
.100 KVA
Load
KVA
Amps
.38
3.13
.72
6.25
.74
6.25
.74
3.13
.76
3.13
1.44
6.25
1.46
6.25
1.50
6.25
.84
7.09
.74
3.54
1.50
6.66
1.54
6.66
1.56
6.66
1.60
6.66
150BB1632Q
.150 KVA
Load
KVA
Amps
.56
4.69
1.06
9.38
1.12
9.38
1.12
4.69
1.14
4.69
2.16
9.38
2.20
9.38
2.26
9.38
1.26
10.64
1.10
5.30
2.26
10.02
2.30
10.02
2.34
10.02
2.40
10.02
205BB1632Q
.250 KVA
Load
KVA
Amps
.94
7.81
1.78
15.63
1.86
15.63
1.88
7.81
1.91
7.81
3.59
15.63
3.67
15.63
3.75
15.63
2.11
17.71
1.84
8.85
3.75
16.67
3.83
16.67
3.90
16.67
3.98
16.67
505BB1632Q
.500 KVA
Load
KVA
Amps
1.88
15.63
3.56
31.25
3.72
31.25
3.75
15.63
3.81
15.63
7.19
31.25
7.34
31.25
7.50
31.25
4.21
35.42
3.68
17.71
7.50
33.33
7.67
33.33
7.80
33.33
7.97
33.33
705BB1632Q
.750 KVA
Load
KVA
Amps
2.81
23.44
5.34
46.88
5.58
46.88
5.63
23.44
5.72
23.44
10.78
46.88
11.02
46.88
11.25
46.88
6.32
53.13
5.53
26.56
11.25
50.00
11.50
50.00
11.70
50.00
11.95
50.00
1BB1632Q
1.00 KVA
Load
KVA
Amps
3.75
31.25
7.13
62.50
7.44
62.50
7.50
31.25
7.63
31.25
14.38
62.50
14.69
62.50
15.00
62.50
8.43
70.83
7.37
35.42
15.00
66.67
15.33
66.67
15.60
66.67
15.93
66.67
105BB1632Q
1.50 KVA
Load
KVA
Amps
5.63
43.90
10.69
93.80
11.16
93.80
11.25
46.90
11.44
46.90
21.56
93.80
22.03
93.80
22.50
93.80
12.64
106.30
11.05
53.10
22.50
100.00
23.00
100.00
23.40
100.00
23.90
100.00
2BB1632Q
2.00 KVA
Load
KVA
Amps
7.50
14.25
62.50 125.00
14.88
125.00
15.00
62.50
15.25
62.50
28.75
125.00
29.38
125.00
30.00
125.00
16.86
141.70
14.73
70.80
30.00
133.30
30.67
133.30
31.20
133.30
31.87
133.30
3BB1632Q
3.00 KVA
Load
KVA
Amps
11.25
21.38
93.80 187.50
22.31
187.50
22.50
93.80
22.88
93.80
43.13
187.50
44.06
187.50
45.00
187.50
25.29
212.50
22.10
106.30
45.00
200.00
46.00
200.00
46.80
200.00
47.80
200.00
5BB1632Q
5.00 KVA
Load
KVA
Amps
18.75
35.63
156.30 312.50
37.19
312.50
37.50
156.30
38.13
156.30
71.88
312.50
73.44
312.50
75.00
312.50
42.15
354.20
36.83
177.10
75.00
333.30
76.67
333.30
78.00
333.30
79.67
333.30
Connection Diagram (pg. 7-24)
B
A
D
D
C
C
C
A
D
C
C
C
C
Three Phase — Table 4
Boosting
A
Bucking
Catalog
Number
Line Voltage
(Available)
183Y/
106
208Y/
120
195
208
225
240
245
250
256
265
272
Insulating
Transformer
Rating
Load Voltage
(Output)
208Y/
120
236Y/
136
208
236
240
208
230
234
240
234
240
050BB1632Q
.050 KVA
Load
KVA
Amps
1.13
3.13
1.28
3.13
1.13
3.13
.62
1.56
1.30
3.13
.56
1.56
1.33
3.34
1.35
3.34
1.39
3.34
.72
1.77
.74
1.77
100BB1632Q
.100 KVA
Load
KVA
Amps
2.25
6.25
2.55
6.25
2.25
6.25
1.30
3.13
2.60
6.25
1.13
3.13
2.66
6.67
2.70
6.67
2.77
6.67
1.44
3.55
1.48
3.55
150BB1632Q
.150 KVA
Load
KVA
Amps
3.38
9.38
3.83
9.38
3.38
9.38
1.95
4.69
3.90
9.38
1.69
4.69
3.98
10.00
4.05
10.00
4.16
10.00
2.15
5.31
2.21
5.31
205BB1632Q
.250 KVA
Load
KVA
Amps
5.63
15.63
6.39
15.63
5.63
15.63
3.17
7.81
6.50
15.63
2.81
7.81
6.64
16.67
6.76
16.67
6.93
16.67
3.59
8.85
3.68
8.85
505BB1632Q
.500 KVA
Load
KVA
Amps
11.26
31.25
12.77
31.26
11.26
31.25
6.33
15.63
12.99
31.25
5.63
15.63
13.28
33.33
13.50
33.33
13.86
33.33
7.17
17.69
7.36
17.71
705BB1632Q
.750 KVA
Load
KVA
Amps
16.89
46.88
19.16
46.88
16.89
46.88
9.50
23.44
19.49
46.88
8.44
23.44
19.92
50.00
20.26
50.00
20.78
50.00
10.76
26.54
11.04
26.56
1BB1632Q
1.00 KVA
Load
KVA
Amps
22.52
62.50
25.55
62.50
22.52
62.50
12.67
31.25
25.98
62.50
11.26
31.25
26.56
66.67
27.02
66.67
27.71
66.67
14.34
35.39
14.72
35.42
105BB1632Q
1.50 KVA
Load
KVA
Amps
33.77
93.75
38.32
93.75
33.77
93.75
19.00
46.88
38.97
93.75
16.89
46.88
39.84
100.00
40.53
100.00
41.57
100.00
21.52
53.08
22.08
53.13
2BB1632Q
2.00 KVA
Load
KVA
Amps
45.03
125.00
51.10
125.00
46.03
125.00
25.33
62.50
51.96
125.00
22.52
62.50
53.11
133.33
54.04
133.33
55.43
133.33
28.69
70.78
29.44
70.83
3BB1632Q
3.00 KVA
Load
KVA
Amps
67.55
187.50
76.64
187.50
67.55
187.50
38.00
93.75
77.94
187.50
33.77
93.75
79.67
200.00
81.06
200.00
83.14
200.00
43.03
106.17
44.17
106.25
5BB1632Q
5.00 KVA
Load
KVA
Amps
112.58
312.50
127.74
312.50
112.58
312.50
63.33
156.25
129.90
312.50
56.29
156.25
132.79
333.33
135.09
333.33
138.56
333.33
71.72
176.95
73.61
177.08
Quantity Required
3
3
2
2
2
2
2
2
2
2
2
Connection Diagram (pg. 7-24)
F
F
H
G
H
L
H
H
H
G
G
= Warehouse Stock
• Output KVA available at reduced input voltage can be found by:
Actual Input Voltage ⴒ Output KVA = New KVA Rating.
Rated Input Voltage
7-22
• Output KVA available at reduced input voltage can be found by:
Actual Input Voltage
Rated Input Voltage
ⴒ Output KVA = New KVA Rating.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Warehouse Stock Transformers
Buck-Boost
Selection
240 ⴒ 480 Volts Primary — 24/48 Volts Secondary, 60 Hz, No Taps, Wall Mounted
Single Phase — Table 5
Boosting
Catalog
Number
Line Voltage
(Available)
230
380
416
425
430
435
440
450
450
460
Bucking
277
480
480
504
Insulating
Transformer
Rating
Load Voltage
(Output)
276
418
458
468
473
457
462
495
472
483
231
436
457
480
050BB2448Q
.050 KVA
Load
KVA
Amps
.29
1.04
.44
1.04
.48
1.04
.49
1.04
.49
1.04
.95
2.08
.96
2.08
.52
1.04
.98
2.08
1.01
2.08
.29
1.25
.50
1.15
1.00
2.19
1.05
2.19
100BB2448Q
.100 KVA
Load
KVA
Amps
.58
2.08
.87
2.08
.95
2.08
.97
2.08
.99
2.08
1.90
4.17
1.93
4.17
1.03
2.08
1.97
4.17
2.01
4.17
.58
2.50
1.00
2.29
2.00
4.38
2.10
4.38
150BB2448Q
.150 KVA
Load
KVA
Amps
.86
3.13
1.31
3.13
1.43
3.13
1.46
3.13
1.48
3.13
2.86
6.25
2.89
6.25
1.55
3.13
2.95
6.25
3.02
6.25
.86
3.75
1.50
3.44
3.00
6.56
3.15
6.56
205BB2448Q
.250 KVA
Load
KVA
Amps
1.44
5.21
2.18
5.21
2.38
5.21
2.43
5.21
2.46
5.21
4.76
5.21
4.81
10.42
2.58
5.21
4.92
10.42
5.03
10.42
1.44
6.25
2.50
5.73
5.00
10.94
5.25
10.94
505BB2448Q
.500 KVA
Load
KVA
Amps
2.88
10.42
4.35
10.42
4.77
10.42
4.87
10.42
4.93
10.42
9.52
20.83
9.62
20.83
5.16
10.42
9.83
20.83
10.06
20.83
2.88
12.50
5.00
11.46
10.00
21.88
10.50
21.88
705BB2448Q
.750 KVA
Load
KVA
Amps
4.31
15.63
6.53
15.63
7.15
15.62
7.30
15.63
7.39
15.63
14.28
31.25
14.44
31.25
7.73
15.63
14.75
31.25
15.09
31.25
4.31
18.75
7.49
17.19
15.00
32.81
15.75
32.81
1BB2448Q
1.00 KVA
Load
KVA
Amps
5.75
20.83
8.71
20.83
9.53
20.83
9.74
20.83
9.85
20.83
19.04
41.67
19.25
41.67
10.31
20.83
19.67
41.67
20.13
41.67
5.75
25.00
9.99
22.92
20.00
43.75
21.00
43.75
105BB2448Q
1.50 KVA
Load
KVA
Amps
8.63
31.25
13.06
31.25
14.30
31.25
14.61
31.25
14.78
31.25
28.56
62.50
28.88
62.50
15.47
31.25
29.50
62.50
30.19
62.50
8.63
37.50
14.99
34.38
30.00
65.63
31.50
65.63
2BB2448Q
2.00 KVA
Load
KVA
Amps
11.50
41.67
17.42
41.67
19.07
41.67
19.48
41.67
19.71
41.67
38.08
83.33
38.50
83.33
20.63
41.67
39.33
83.33
40.25
83.33
11.50
50.00
19.98
45.83
40.00
87.50
42.00
87.50
3BB2448Q
3.00 KVA
Load
KVA
Amps
17.25
62.50
26.13
62.50
28.60
62.50
29.22
62.50
29.56
62.50
57.13
125.00
57.75
125.00
30.94
62.50
59.00
125.00
60.38
125.00
17.25
75.00
29.98
68.80
60.00
131.25
63.00
131.25
5BB2448Q
5.00 KVA
Load
KVA
Amps
28.75
43.54
104.17 104.17
47.67
104.17
48.70
104.17
49.30
104.20
95.20
208.30
96.20
208.30
51.56
104.17
98.30
208.30
100.60
208.30
28.80
125.00
50.00
114.60
100.00
218.75
105.00
218.75
B
D
D
D
C
C
D
C
C
B
D
C
C
Connection Diagram (pg. 7-24)
D
Three Phase — Table 6
Boosting
Catalog
Number
Line Voltage
(Available)
399Y/
380
230
Bucking
430
440
460
460
480
480
440
440
460
460
480
480
500
500
Insulating
Transformer
Rating
Load Voltage
(Output)
480Y/
418
277
473
462
506
483
528
504
400
419
438
418
457
436
455
476
KVA
Amps
.86
1.04
.75
1.04
.85
1.04
1.66
2.08
.91
1.04
1.74
2.08
.95
1.04
1.82
2.08
.79
1.14
1.58
2.18
1.66
2.18
.83
1.14
1.73
2.18
.86
1.14
.90
1.14
1.80
2.19
100BB2448Q
.100 KVA
Load
KVA
Amps
1.73
2.08
1.51
2.08
1.70
2.08
3.33
4.16
1.82
2.08
3.48
4.16
1.90
2.08
3.63
4.16
1.59
2.29
3.17
4.37
3.31
4.37
1.66
2.29
3.46
4.37
1.73
2.29
1.80
2.29
3.61
4.38
150BB2448Q
.150 KVA
Load
KVA
Amps
2.60
3.12
2.26
3.13
2.56
3.12
4.99
6.24
2.73
3.12
5.22
6.25
2.85
3.12
5.45
6.24
2.38
3.43
4.75
6.55
4.97
6.55
2.48
3.43
5.19
6.55
2.59
3.43
2.70
3.43
5.41
6.56
205BB2448Q
.250 KVA
Load
KVA
Amps
4.33
5.20
3.77
5.21
4.26
5.20
8.32
10.40
4.56
5.20
8.70
10.40
4.76
5.20
9.08
10.40
3.96
5.72
7.92
10.92
8.28
10.92
4.14
5.72
8.64
10.92
4.32
5.72
4.51
5.72
9.02
10.94
505BB2448Q
.500 KVA
Load
KVA
Amps
8.60
10.40
7.54
10.42
8.52
10.40
16.64
20.80
9.11
10.40
17.40
20.80
9.51
10.40
18.16
20.80
7.93
11.44
15.85
21.84
16.57
21.84
8.28
11.44
17.29
21.84
8.64
11.44
9.02
11.44
18.04
21.88
705BB2448Q
.750 KVA
Load
KVA
Amps
12.90
15.60
11.31
15.63
12.77
15.60
24.97
31.20
13.67
15.60
26.10
31.20
14.27
15.60
27.24
31.20
11.89
17.16
23.77
32.76
24.85
32.76
12.42
17.16
25.93
32.76
12.96
17.16
13.52
17.16
27.06
32.81
1BB2448Q
1.00 KVA
Load
KVA
Amps
17.30
20.80
15.08
20.83
17.03
20.80
33.29
41.60
18.23
20.80
34.80
41.60
19.02
20.80
36.31
41.60
15.85
22.88
31.70
43.68
33.14
43.68
16.57
22.88
34.57
43.68
17.28
22.88
18.03
22.88
36.08
43.75
105BB2448Q
1.50 KVA
Load
KVA
Amps
25.90
31.20
22.62
31.25
25.55
31.20
49.93
62.40
27.34
31.20
52.50
62.40
28.53
31.20
54.47
62.40
23.78
34.32
47.55
65.52
49.71
65.52
24.85
34.32
51.86
65.62
25.92
34.32
27.05
34.32
54.13
65.63
2BB2448Q
2.00 KVA
Load
KVA
Amps
34.60
41.60
30.17
41.67
34.07
41.60
66.58
83.20
36.46
41.60
69.60
83.20
38.04
41.60
72.63
83.20
31.70
45.76
63.40
87.36
66.27
87.36
33.13
45.76
69.15
87.36
34.56
45.76
36.06
45.76
72.17
87.50
3BB2448Q
3.00 KVA
Load
KVA
Amps
52.00
62.50
45.25
62.50
51.18 100.03
62.50 125.00
49.77 103.89
68.75 131.25
51.92
68.75
54.18 108.25
68.75 131.25
5BB2448Q
5.00 KVA
Load
KVA
86.10 75.42 85.17 166.44 91.15 174.01 95.11 181.57 79.26 158.50 165.69 82.83 172.87 86.39 90.16 180.42
Amps 104.00 104.17 104.00 208.00 104.00 208.00 104.00 208.00 114.40 218.40 218.40 114.40 218.40 114.40 114.40 218.75
54.69 104.57
62.50 125.00
57.07 109.12
62.50 125.00
47.63 95.25 99.57
68.75 131.25 131.25
Quantity Required
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Connection Diagram (pg. 7-24)
E
G
G
H
G
H
G
H
G
H
H
G
H
G
G
H
= Warehouse Stock
• Output voltage for lower input can be found by:
Rated Output Voltage ⴒ Input Actual Voltage = Output New Voltage.
Rated Input Voltage
• Output KVA available at reduced input voltage can be found by:
Actual Input Voltage
Rated Input Voltage
ⴒ Output KVA = New KVA Rating.
• Inputs and outputs may be reversed
without affecting KVA capacity. See
note on page 7-24.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
7-23
TRANSFORMERS
Load
7
050BB2448Q
.050 KVA
Buck-Boost Transformers
Single Phase, Three Phase
Single Phase
Typical Connection Diagrams
Three Phase
Note: Contact sales office for diagrams applicable to “Q” suffix.
Diagram E
Diagram A
Diagram F
Low Voltage
High Voltage
Diagram G
Low Voltage
Low Voltage
Diagram B
High Voltage
High Voltage
WYE
High Voltage
Diagram J
Open Delta
WYE
Diagram H
High Voltage
Low Voltage
Low Voltage
Diagram C
High Voltage
Low Voltage
High Voltage
High Voltage
WYE
Diagram K
Open Delta
Diagram L
Low Voltage
High Voltage
7
Diagram D
TRANSFORMERS
Low Voltage
High Voltage
High Voltage
Low Voltage
WYE
Open Delta
(Standard Step-down Application)*
*Low Voltage Applications:
By using the “Standard Step-down Application” diagram at left, buck boost transformers
will convert 120V or 240V to 12, 24, 16 or 32 volts and 240V or 480V to 24 or 48 volts
without affecting the nameplate KVA rating of the transformer. Buck boost transformers
used in this type of application will become isolation or insulating type transformers.
These
diagrams can only be used when the source is a
4-wire supply.
The neutral XO should not be used when the source is a
three wire supply.
Note:
Inputs and Outputs may be reversed; KVA capacity
remains constant. Exception: Cannot use 3-wire input
with 4-wire output to form a neutral and does not
apply to standard step-down applications.
Refer to NEC 450-4 for overcurrent protection of an
autotransformer.
•
•
7-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
• All applications are suitable for 60Hz only.
8SPEEDFAX
TM
2007-2008 Power Monitoring
Contents
Power Monitoring Systems Overview
8-2
Intelligent Metering and Control Devices
8-3
9200 Power Meter
8-4
9300 Power Meters
8-5
9330/9350 Power Meters
8-6
9510/9610 Power Meters
8-7
9510 ADR Advanced Data Recorder
8-8
WinPM.Net Software
8-9
Current and Voltage Transformers
8-10
Application Engineering Services and Training
8-11
Siemens ACCESS power monitoring systems provide the
hardware and software for complete power information
management and control.
Features
▪ Power Quality Reliability and Analysis
▪ Electrical Asset Management
▪ Utilities Cost Allocation and Billing
▪ Utilities Usage Aggregation
▪ Load Studies and Circuit Optimization
▪ Demand and Power Factor Control
▪ Load Preservation
▪ Equipment Monitoring and Control
For technical assistance contact:
1-800-427-2256
Email your questions:
Access.Support@siemens.com
For latest information go to:
www.sea.siemens.com/ACCESS
Residential Commercial Industrial
POWER
MONITORING
▪ Sequence of Events Recording
▪ Preventative Maintenance
8
▪ JCAHO Compliance Testing
▪ Facility Monitoring and Automation
Totally Integrated Power
System Overview
General
2
2
2
3
7
7 10 11
1
4
9
6 10
1
1
2
4
8
9
7
1
2
6 10
4
6 10
7
2
7
7
1
1
2
7 10 11
2 11
1
7
2
6
2
3
1
6
4
2
6 10
9
4
7
2 11
7
2
3
5 11
POWER
MONITORING
8
2
3
7 10 11
1
2
7
1. Power Meters
Siemens’ ACCESS power monitors combine the best of new
technologies and proven practices. Monitor critical loads, power
quality, and demand via the web directly from the meters.
2. Power Monitoring Software
WinPM.Net web-enabled software facilitates easy, enterprise-wide
connection to power monitoring equipment, circuit breakers, and
other devices from Siemens and third parties. Access information
via the web with unlimited no-cost clients using built-in WebReachTM
via your web browser.
3. Communications Networks
Utilize existing Ethernet or RS-485 communications networks to
extract the information you need and get it where it needs to go.
4. Components
Current Transformers (CTs), Voltage/Potential Transformers (PTs),
Power Supplies, Ethernet Switches, Protocol Converters. Siemens
can provide everything required for your system.
5. Intelligent I/O
Our S7 I/O enables plug-n-play communications with Modbus
devices and expands digital and analog input and output functionality
of ACCESS Systems.
6. Billing and Load Allocation Software
ACCESS Energy Manager is the low-cost, simplified solution for cost
allocation, billing & load/demand analysis using your web browser.
8-2
3
8
4 5
9 10 11
7. Engineering Services
PDS Application Engineers can help from design through
commissioning of even the most demanding power quality
and monitoring systems.
8. Motor Control Centers
Monitor mains and feeders for critical or power-intensive loads.
Communicate with breakers (Static Trip III, SBEC), SAMMS,
SIMOCODE, I/O and devices from other manufacturers. Use
ACCESS power meters to web-enable new as well as existing MCCs.
9. Low & Medium Voltage Switchgear
Web-enable switchgear by having ACCESS monitor power as well
as breaker status and upload the information to a corporate Intranet
or to the Internet. Use MeterMailTM directly from meters for alarm
conditions or simple reporting.
10. Facility Management Systems
Tie into building automation systems to provide the required
power and energy information. Lots of communications options
are available ranging from legacy protocols to XML directly from
the power monitors.
11. Distributed Control Systems, Automation, and
SCADA/Human Machine Interface
ACCESS power monitors and/or software can talk to all major
vendors’ systems.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Totally Integrated Power
Intelligent Metering and Control Devices
9100
POWER, ENERGY and DEMAND
Voltage/current: per phase, average
Voltage/current: unbalance
Power: real, reactive, apparent, power factor, frequency
Energy: bi-directional, import, export
Energy: total, net
Demand: block, sliding window
Demand: thermal predicted
POWER QUALITY ANALYSIS
Sag/swell monitoring
Symmetrical components: zero, negative, positive
Transient detection, microseconds
Harmonics (individual, even, odd, total) up to
Sampling rate, maximum samples/cycle
Flicker, harmonics to EN50160, IEC 6100-4-7 / 4-15
Configurable for IEEE 519-1992, IEEE 1159, SEMI/ITIC
“Number of nines” uptime data (3 nines=99.9%)
DATA and WAVEFORM LOGS
Triggered by setpoint, schedule, or external signal
Sequence-of-event logs, variable log depth
Minimum/maximum logs for any parameter
Historical logs, maximum # of channels
Waveform logs, maximum # of consecutive cycles
Time-stamps, resolution in seconds
GPS time synchronization
COMMUNICATION PORTS and I/O ( ) = Optional
RS-232/485 ports
RS-485-only ports
Ethernet ports
Infrared optical ports
WirelessTransmission
PROFIBUS ports
Built-in modems
kW/kWh
General
9200
9300
9330
9350
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
THD only
64
15th
32
15th
32
9510
9610/9610H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
31st
64
63rd
256
65/17
127th/256th
512/1024
•
•
•
•
•
•
•
•
•
•
800
800
96
0.001
800
96
0.001
•
•
•
•
•
•
•
•
•
1
32
•
0.001
96
48
0.001
1
1
(1)
1
9510 ADR
2
(1)
1
2
(1)
1
1
1
(1)
1
1
1
(1)
1
1
1
(1)
1
•
(1)
Modbus RTU Slave on serial, modem or infrared ports
(If equipped with modem or infrared port)
•
(1)
(1)
(1)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(4)
(4)
4
4
(4)
(4)
4
4
(4)
(4)
8/8
7
(4)
(4)
8/8
7
(4)
(4)
8/8
7
1 sec
1 sec
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(4)
(4)
2
•
4
•
•
•
•
•
•
⁄2 cycle
1
•
•
•
⁄2 cycle
1
⁄2 cycle
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Some features are optional. Refer to datasheets for allowable port configurations. Products meet or exceed the accuracy requirements of the standards listed; due to form factors, not
all ANSI/IEC compliance tests may apply. Some products certified by third-party laboratory.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
8-3
POWER
MONITORING
(1)
•
8
Modbus RTU Master on serial ports
Modbus/TCP on Ethernet ports
DNP 3.0 on serial, modem, infrared ports
EtherGate™: 31 other meters accessible via RS-485
ModemGate: 31 other meters accessible via RS-485
MeterM@il®: data e-mailed from meter
WebMeter®: on-board web server
XML
Analog inputs
Analog outputs
Digital status/counter inputs (standard/optional add-ons)
Digital relay outputs (control/pulse)
SETPOINTS, ALARMING and CONTROL
Setpoints, minimum response time
Math, logic, trig, log, linearization formulas
Single- and multi-condition alarms
Call-out on alarm
REVENUE METERING
ANSI C12.16 accuracy compliant
ANSI C12.20 0.2 compliant
IEC 60687 0.2S compliant
IEC 60687 accuracy class 0.5S compliant
ANSI class 10 (5A nominal, 10A max)
ANSI class 2, IEC 1/10 (1A nominal, 10A max)
ANSI class 20, IEC 5/20 (5A nominal, 20A max)
MV-90 on serial; Ethernet ports
Time-of-use
Transformer/line loss compensation
(1)
•
Totally Integrated Power
9200 Power Meter
Selection
Standard Measurements
Voltage (l-n), per phase, avg.
Voltage (l-l), per phase, avg.
Current, per phase, avg.
Meter Options
Features
▪ Use the 9200 Power Meter for basic
metering applications, like sub-billing,
cost allocation and tenant monitoring
▪ For use in Switchboards to replace
multiple analog meters and rotary
switches, with less space and wiring
▪ Choose between two mounting options,
and one of three measurement packages.
All units come standard with Modbus/RTU
RS-485 communication. The 9200 with
no display is excellent for low cost
sub-metering applications in
switchboards
High Accuracy
POWER
MONITORING
8
Measurement Method and Accuracy
▪ 64 samples per cycle
▪ IEC 60687 class 0.5 accuracy
▪ 4 quadrant energy and demand
▪ Per phase voltage, current, peak current
demand, watts, VARs, kWh, and more
▪ Neutral current, THD, frequency, power
factor and more
▪ Revenue Accurate
Enhanced Package #1
Includes standard measurements and
adds:
Energy,(kWh) Imported/Exported Total
Power, (kW)
Total Peak Power Demand (kW)*
Current Demand, Avg + Per Phase Peak
Current Demand, Avg + Per Phase
Current, Neutral Frequency
Power Factor, Total
Enhanced Package #2
Includes all the preceding parameters
and adds:
Power, (kW) Per Phase*
Power Factor, Per Phase
Reactive Energy (KVARh) Import/Export*
Apparent Energy, (kVAh)*
Reactive Power, (kVAR) Per Phase & Total*
Apparent Power, (kVA) Per Phase & Total*
Reactive Power, (kVAR) Peak Demand*
Apparent Power, (kVA) Peak Demand*
THD Voltage & Current, Per Phase
Energy, (kWh) Import/Export Per Phase*
9200 Meter Catalog Number Configuration
Meter Catalog Number
9200 D D -
1 Z Z A
Description
Meter base unit and diplay optins
• Integrated display unit with RS-485 and Modbus RTU communication
D
• Remote display unit with RS-485 and Modbus RTU communication
R
• Non-display unit with RS-485 and Modbus RTU communication
T
Metering Options
• Configured for Volts and Amps per phase and avg.
A
• Configured for Volts and Amps per phase and avg. with Energy/Power,
Frequency, PF (package #1)
D
• Configured for Volts and Amps per phase and avg. with Energy/Power,
Frequency, PF, KVAR, kVA, andTHD (package #2)
G
Power Supply
• 100-240 Vac / 110-300Vdc
1
• 435-530Vac
2
Building Management Interface
• 20-60 Vdc
3
Pulse Output Option
▪ kWh and/or kVARh and/or kVAh pulsing
▪ Rated 100mA, 200 VAC/DC
Digital Output
System Integration
Security Options for Revenue Metering
Communications
▪ Industry standard protocol, Modbus
RTU, for use with WinPM.Net™
software or any Modbus compatible
system
• Password Protected
• None
Z
•Two optically isolated Form A outputs for kWh, kVAh or kVARh energy
pulsing
A
Z
Specials
• None
A
Power Supply
▪ 100-240 VAC (50-60 Hz)/110-300 VDC
▪ 20-60 VDC (+/-10%)
▪ 480 VAC
*Meets or exceeds IEC 60687 class 0.5 accuracy.
**As represented in SPACE 2000.
8-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PDS
Totally Integrated Power
9300/9330/9350 Low Cost Web-enabled Power Meter
Use the 9300 Power Meter for basic
metering applications, like sub-billing, cost
allocation, tenant monitoring and for any
PROFIBUS applications.
Use the 9330 Power Meter where onboard
data logging and setpoint-based alarms are
required. An optional, built-in modem is
available, and can be used as a gateway
for up to 31 additional devices.
Use the 9350 where -- in addition to all of
the above -- waveforms are required. Also
has sag/swell, enhanced harmonics, and
faster sampling rates.
All meters have the option of adding a
network card which provides an Ethernet
port and access to onboard web pages,
for easy viewing of real-time data from
your desktop browser. This also enables
MeterMail, a function that allows the
meters to send messages to PCs, pagers,
cell phones, PDAs and other mobile
devices. These messages can be alarms,
data, peak demand notifications, etc.
Selection
▪ 9350 SEAbus/ION, Modbus RTU & TCP,
DNP3.0
▪ EtherGate™ allows direct Ethernet-to RS-485
data transfer to 31 other devices
▪ Infrared data port standard
Onboard Data Logging
▪ 9330 - Log up to 32 parameters for 30 days
▪ 9350 - Same as 9330 plus three6-channel
waveform captures, fully configurable
▪ Sequence-of-events and min/max logging
Setpoints for Control and Alarms
▪ Create custom set-points on any parameter
or condition
▪ 1 second operation
▪ Control demand with peak shaving and
advanced notification of approaching peaks
9300 Meter Catalog Number Configuration
Description
Meter base unit and diplay options
• Meter with integrated display
• Meter with remote display (includes 6' cable and surface mount transducer)
• Meter without display (Surface mount transducer version)
• Meter with integrated display installed in S1 retro-fit switchboard kit (meter in
cage with cover, no casing)
• Meter with integrated display installed in FT21 retro-fit switchboard kit (meter
in cage with cover, no casing)
Communicatons
• RS485 with Modbus RTU (for use with integrated display only - when selecting “D”
, “S” or “F” base unit above)
• RS485 with Modbus RTU (for use with transducer version only - when
selecting “T” or “R” base unit above)
• Profibus (for use with integrated display model only - selection “D” above)
Power Supply
• 85-240 VAC/VDC
• 20-60 VDC
Input Voltage
• 50-347 VAC
Input Frequency
• 50 - 60 Hz
0
-
N Z Z Z A
D
R
T
S
F
C
M
P
1
2
0
0
Z
N
B
C
D
E
F
G
Wire Terminal Type for Input Voltage & Current Connections
• Ring/Split/Bare wire type
• Barrier/Captured wire type
Meter Mounting Options
• Standard panel mounting
• DIN Rail Kit (available for Remote “R” orTransducer “T” type base units only)
Tropicalization Protection
• None
•Yes
Draw-Out Case Option
Available in 9300, 9330 and
9350 meter styles
Discount Schedule PDS
Specials
• None
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
POWER
MONITORING
Network Card or Analog I/O (Analog options not available with Profibus or
Remote and Transducer base unit options)
• None
• Ethernet Communication (10BaseT) RJ-45 Port
• 4 Analog Inputs 0 to 1 mA
• 4 Analog Inputs 0 to 20 mA
• 4 Analog Outputs 0 to 1 mA
• 4 Analog Outputs 0 to 20 mA
• 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs 0 to 1 mA
• 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA
Meter Catalog Number
9300 D C - 1 0
8
Mounting Options:
▪ Integrated Display for panel mounting
▪ Remote Display
▪ No display
▪ In FT21 or S1 switchboard case for
retrofit applications
Measurements
▪ Hundreds of high accuracy power
measurements
▪ Harmonics to the 15th for 9300 &
9330, to the 31st for the 9350
▪ Predicted kW demand for demand
control applications
Digital Inputs and Outputs
▪ 4 digital inputs for status/counter
functions, log gas, water, steam and
air inputs
▪ 4 digital outputs for control/pulse
Waveform Capture (9350 only)
▪ Capture from 12 to 48 cycles on all channels
at 16 to 64 samples per cycle
▪ Sag/swell detection to trigger waveforms on
out-of-tolerance conditions
Analog Inputs and Outputs
▪ 4 - 4-20mA Inputs and Outputs
▪ 4 - 0-1mA Inputs and Outputs
Communications
▪ 9300 single RS-485 port, Ethernet option
▪ 9330 two RS-485 ports std, Ethernet and
Modem optional
▪ 9350 two RS-485 ports std, Ethernet and
Modem optional
Supported Protocols
▪ 9300 SEAbus/ION, PROFIBUS, Modbus RTU
& TCP
▪ 9330 SEAbus/ION, Modbus RTU & TCP,
DNP3.0
Z
P
Z
D
Z
T
A
8-5
Power Monitoring
9330/9350 Power Quality Meter with Web Server Technology
9330/9350 Meter Catalog Number Configuration
Meter Catalog Number
9330
D
C
9350
Description
Meter base unit and diplay options
• Meter with integrated display
• Meter with remote display (includes 6' cable and surface mount transducer)
T
• Meter with integrated display installed in S1 retro-fit switchboard kit (meter in cage
with cover, no casing)
S
• Meter with integrated display installed in FT21 retro-fit switchboard kit (meter in
cage with cover, no casing)
F
• RS485 with Modbus RTU (for use with transducer version only - when selecting
“T” or “R” base unit above)
1
0
0
-
O
Z
Z
Z
Z
A
D
R
• Meter without display (Surface mount transducer version)
Communications
• RS485 with Modbus RTU (for use with integrated display only - when selecting “D”
,
“S” or “F” base unit above)
-
Selection
C
M
Power Supply
• 85-240 VAC/VDC
• 20-60 VDC
1
2
Input Voltage
• 50-347 VAC
0
Input Frequency
• 50 - 60 Hz
0
Modem
• None
0
• Modem w/ RJ-11
(See Note 1 below)
• Modem w/ plug connector (See Note 1 below)
1
2
Network Card or Analog I/O
(Analog options not available with Remote orTransducer base unit options)
• None
Z
• Ethernet Communication (10BaseT) RJ-45 Port
N
• 4 Analog Inputs 0 to 1 mA
B
• 4 Analog Inputs 0 to 20 mA
C
• 4 Analog Outputs 0 to 1 mA
D
• 4 Analog Outputs 0 to 20 mA
E
• 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs 0 to 1 mA
F
• 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA
G
POWER
MONITORING
8
Wire Terminal Type for input voltage & current connections
• Ring/Split/Bare wire type
• Barrier/Captured wire type
Meter Mounting Options
• Standard panel mounting
• DIN Rail Kit (available for Remote “R” or Transducer “T” type base units only)
Tropicalization Protection
• None
• Yes
Specials
• None
Z
D
Z
T
A
Note 1 — The listed modems are suitable for USA applications. Contact Sales for special versions.
8-6
Z
P
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Totally Integrated Power
9510/9610 Power Quality Meter with Web Server Technology
9510/9610 Power Meter
▪ 9610 SEAbus/ION, Modbus RTU & TCP,
DNP3.0, XML
▪ EtherGate™ allows direct Ethernet-to
RS-485 data transfer to 31 other devices
▪ ModemGate™ allows direct modem-to
RS-485 data transfer to 31 other devices
▪ Infrared data port standard
Modbus Master
▪ Bring other devices’ information into
the meter using the Modbus Master
capability. Store data onboard in the
meter, display locally, create set-points
for the logged values and perform logic
functions. Web server posts slave
device data to web pages
Meter Catalog Number
9510
D C - 1
9610
9510/9610 Meter
Catalog Number Configuration
Description
Meter base unit and diplay options
• Meter with integrated display, and 5 MB logging memory
• Meter with integrated display, and 10 MB logging memory
• Meter without display, with 5 MB logging memory
(Transducer version)
• Meter without display, with 10 MB logging memory
(Transducer version)
5
6
-
A
B
Z
Z
A
D
D
E
T
U
Sampling Rate
• 512 sampling
C
• 1024 Sampling
H
Power Supply
• 85-240 Vac/Vdc
• 20-60 Vdc
1
1
2
Input Voltage
• 57 to 347 L-N / 100 to 600 L-L Vac
1
Input Current
• 1A Nominal (10 Amp full scale)
• 5A Nominal (20 Amp full scale)
1
5
System Frequency
• 50 Hz
5
• 60 Hz
6
Ethernet Ethernet
10Base-T
with RJ45 10Base-FL
X
X
X
X
X
X
Auxiliary I/O Cards
• Optiom #1 - None (base meter includes 8 digital in & 7 digital out)
• Optiom #2 - 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA
• Optiom #3 - 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA
• Optiom #4 - 8 Binary Inputs; 4 Analog Outputs -1 to 1 mA
• Optiom #5 - 8 Binary Inputs; 4 Analog Outputs 0 to 20 mA
• Optiom #6 - 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA
• Optiom #7 - 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs -1 to 1 mA
Tropicalization Protection
• None
•Yes
Specials
• Standard (password protected, no locking or sealing)
• Password protected and hardware lockable (lock enabled/disabled via jumper on comm card)
• EN50160 compliance monitoring
• EN50160 compliance monitoring with password protection and hardware lockable
A
B
C
D
E
F
POWER
MONITORING
Communication Cards
RS232/RS485
Infrared
Modem
(Selectable) RS485
(Note 1) (Notes 1 & 2)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
8
Power Quality Meter with Web Server
Technology
▪ Use the 9510 Power Quality Meter at
service entrance points, on critical loads,
and at locations requiring power quality
analysis
▪ Use the 9610 Power Quality Meter to
meet all the requirements above and
where high-speed transient capture,
additional memory for data logging
and/or compliance monitoring is required
▪ Both meters have the option of adding a
network card, which provides an
Ethernet port and access to onboard
web pages for easy viewing of real-time
data from your desktop browser. Also
includes e-mail for alarms as well as
for sending scheduled data such as
monthly kWh
Mounting Options:
▪ Integrated Display for panel mounting
▪ Transducer (TRANS) with no display
where local display is not required
Measurements
▪ Hundreds of high accuracy power
measurements
▪ Harmonics to the 127th for 9510, to
the 511th for the 9610
▪ Predicted kW demand for demand
control applications
Standard Digital Inputs and Outputs
▪ 8 digital inputs for status/counter
functions. Log gas, water, steam, air
inputs, breaker status, etc.
▪ 4 digital outputs for control/pulse
▪ 3 relay outputs for control
Additional I/O
▪ 4 - 4-20mA Inputs and Outputs
▪ 4 - 0-1mA Inputs and Outputs
▪ 8 Digital Inputs
Waveform Capture
▪ Capture from 7 to 96 cycles on all
channels at 16 to 1024 samples per
channel per cycle per event. Multiple
events can be linked to form a
continuous waveform strip chart
▪ 1 cycle Sag/swell detection to trigger
waveforms on out-of-tolerance
conditions
Selection
Transient Capture
▪ The 9610 can detect and record
sub-cycle transients as short as 17
microseconds
Communications
▪ 9510 two RS-485 ports standard,
Ethernet and Modem optional
▪ 9610 two RS-485 ports standard,
Ethernet and Modem optional
▪ Meter Mail allows e-mail of alarms or
data logs by schedule or event driven
Supported Protocols
▪ 9510 SEAbus/ION, Modbus RTU & TCP,
DNP3.0, XML
Z
B
C
D
E
F
G
Z
T
A
B
C
D
Note 1 — The infrared and modem connections cannot be operated simultaneously. The connection type is configurable.
Note 2 — The listed modems are suitable for European applications. Contact Sales for special versions.
Discount Schedule PDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
8-7
Totally Integrated Power
Critical Process Monitoring with the 9510/9610
Siemens Advanced Data Recorder
(ADR)
Selection
Local Display for WL Power Breaker
9510 ADR
9510 ADR Wiring
For use as a low-cost data concentrator or local
display, the 9510 ADR is a multi-function device
which supports multiple protocols, digital and I/O
options, and customizable displays. Each unit
must be custom configured for your application.
Standard units are shipped with displays only for
the digital I/O status. To use the unit as a Local
Display, custom programming is required.
▪ Consolidate data from multiple devices in a central display.
▪ View real-time and breaker status for up to 16 WL
breakers, with 20 points per trip unit.
▪ WL Breakers must include a COM 16 module for
communication capability.
Features:
▪ Monitor breaker status changes with 1ms
resolution
Collect,
log and scale pulse inputs from water,
▪
air, gas, electricity or steam meters
▪ Act as an Ethernet Gateway for serial devices
▪ Display Modbus slave information locally and via
HTML web pages
▪ Log data and e-mail alarms from Downstream
Modbus devices
▪ Display trip unit data from WL, Static Trip III and
SB-EC devices
▪ Trigger alarms based on setpoint conditions
9510 ADR Catalog Number Configuration
Description
Monitor Base Unit Type
• Monitor with integrated display, and 5 MB logging memory
• Monitor with integrated display, and 10 MB logging memory
• Monitor without display, with 5 MB logging memory
(Transducer version)
• Monitor without display, with 10 MB logging memory
(Transducer version)
Communication
• Modbus
▪ SPI-1000 is required for communication between
9510 ADR and Static Trip III.
WL Trip Units (max 16 devices)
Meter Catalog Number
9510 D C - 2 R
8
POWER
MONITORING
T
U
-
B
Z
Z
A
D
E
T
U
C
1
2
Device
• Remote Transducer Unit
R
T
U
10Base-T
with RJ45 10Base-FL
X
X
X
X
X
X
Auxiliary I/O Cards
• None (base meter includes 8 digital in & 7 digital out)
• 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA
• 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA
• 8 Binary Inputs; 4 Analog Outputs -1 to 1 mA
• 8 Binary Inputs; 4 Analog Outputs 0 to 20 mA
• 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA
• 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs -1 to 1 mA
Tropicalization Protection
• None
•Yes
Specials
• Standard (password protected, no locking or sealing)
A
B
C
D
E
F
Z
B
C
D
E
F
G
Z
T
A
* Factory Programming Available (contact sales or refer to Engineering Service price list).
8-8
Water, Air, Gas and Steam Monitoring
The Advanced data recorder comes with
Digital inputs which can be configured for
pulse counting applications where full
utility monitoring is required.
Now gas, water, air and steam pulses
can be collected in one unit, logged and
displayed. Up to 16 digital inputs can be
added.
Local Display
Power Supply
• 85-240 Vac/Vdc
• 20-60 Vdc
Communication Cards
5
Infrared
Modem
(Selectable)
RS485 (Note 1) (Notes 1 & 2)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
▪ Factory configured and installed.
▪ View real-time and breaker status for up to 16 Static Trip III
units, with 20 points per breaker.
COM 1
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Totally Integrated Power
WinPM.Net Software
WinPM.Net ™ web-enabled software is a
complete energy information management
solution for your business. It offers control
capabilities, comprehensive power quality
and reliability analysis and can help you
reduce energy related costs. WinPM.Net
allows you to manage our intelligent
metering, monitoring and control devices,
analyze data, and decide on new courses
of action.
Its cutting-edge flexibility and compatibility
means you can add one piece at a time,
at your own pace, while still maintaining
your original investments. Interface to
your existing systems through
industry-standard protocols and choose
newer components as they become
available. WinPM.Net is a powerful
software suite that can process, analyze,
store, and share data across your entire
enterprise. You can access information
from any desktop workstation, locally or
around the world, in the format you need.
The software collects data through serial,
wireless, modem, or Ethernet links, so
you can manage a single site or a global
network of devices.
Customized System Diagrams:
▪ Powerful Aggregation and control Tools
▪ All configuration tools are included as
standard; no separate development/
runtime licenses
WinPM.Net: for Analysis and Control:
▪ Display and Configuration
▪ Power Quality
▪ Cost Allocation
▪ Automated Control
▪ Logging Data from Devices
▪ Load Aggregation
▪ Modbus Master
Applications:
▪ Power Quality and Reliability Analysis
▪ Cost Allocation and Billing
▪ Load Studies and Circuit Optimization
▪ Demand and Power Factor Control
▪ Equipment Monitoring and Control
▪ Preventative Maintenance
WinPM.Net Data Analysis:
▪ Standard Reports
▪ Aggregate Energy and Demand
Reports
▪ Aggregate Load Profile Reports
▪ Power Quality Reports
▪ EN50160 Reports
• Custom Reports
WinPM.Net Networks:
▪ Serial Sites
▪ Ethernet Sites
▪ Modem Sites
▪ Gateway Sites
▪ Web Deployment
▪ Time Synchronization
▪ Third Party Integration
Custom Graphical Interface:
▪ Reporting & Visualization
▪ Device Configuration
▪ Firmware Upgrade Utility
▪ Configuration Tools
WinPM.Net Monitoring Your Power
System:
▪ Take Advantage of Default Views
▪ Power Quality Displays
▪ Customize Your Backgrounds
▪ Display Data the Way You Want
▪ Receive Alarms at Your Desktop or on
Your Mobile Device (Pager, Cell phone,
PDA, etc.)
▪ Access WinPM.Net Remotely from any
Networked PC Using Web Browser
(Internet Explorer).
▪ Perform Manual Control Operations
▪ Create Your Own Database Queries
▪ Check Status Indicators
▪ Generate Trend Graphs
▪ Tunnel into Details with “Hot Spots”
▪ Share data with other ODBC programs
Ordering Information:
WinPM.Net is packaged based on the
number of devices (power monitors, circuit
breakers, protective relays, etc.) that will
be monitored.
Consult factory for pricing and
configuration recommendations.
Start-up services are required for
all software sales.
Email:
Access.Support@sea.siemens.com
Toll-free: 1-800-427-2256
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
8-9
POWER
MONITORING
Features Summary:
▪ Unlimited no-cost view only clients
using standard web browser
▪ Data Acquisition
▪ Monitoring
▪
▪
▪
▪
8
Device Compatibility
WinPM.Net supports all current
ACCESS field devices, including the
following:
▪ 9700 Power Meter
▪ 9610 Power Meter
▪ 9510 Power Meter
▪ 9350 Power Meter
▪ 9330 Power Meter
▪ 9300 Power Meter
▪ 9200 Power Meter
▪ 4720 Power Meter
▪ 4700 Power Meter
▪ 4300 Power Meter
▪ ISGS intelligent Switchgear System
▪ SB Energy Communicating Breaker
Unit (SBEC)
▪ WL/VL Low Voltage Power Circuit
Breakers
▪ Static trip III Trip Unit
▪ S7 I/O
▪ Siemens Advanced Motor Master
System (SAMMS)
▪ ISGS MV Relays
▪ Most third party Modbus Devices
General
Analysis
Control
Equipment Monitoring and Control
Preventative Maintenance
Totally Integrated Power
Current & Voltage Transformers (Metering Grade)
Selection
Low Voltage Current Transformers (Metering Grade)
Primary
Description
Secondary
Accuracy
POWER
MONITORING
8
Split Core - Rectangular Metering Grade, 600V, 0.5% Accuracy
100A
1.25" x 1.51" Window
5A Output
200A
1.25" x 1.51" Window
5A Output
300A
1.25" x 1.51" Window
5A Output
400A
2.45" x 2.89" Window
5A Output
600A
2.45" x 2.89" Window
5A Output
800A
2.45" x 2.89" Window
5A Output
1000A
2.45" x 5.50" Window
5A Output
1200A
2.45" x 5.50" Window
5A Output
1600A
2.45" x 5.50" Window
5A Output
2000A
2.75" x 6.625" Window
5A Output
3000A
2.75" x 6.625" Window
5A Output
Split Core - Round Metering Grade, 600V
200A
4.0" Window
5A Output
4% Accuracy
300A
4.0" Window
5A Output
4% Accuracy
400A
4.0" Window
5A Output
3% Accuracy
600A
4.0" Window
5A Output
2% Accuracy
800A
4.0" Window
5A Output
2% Accuracy
1200A
4.0" Window
5A Output
2% Accuracy
3000A
6.0" Window
5A Output
2% Accuracy
2000A
6.0" Window
5A Output
2% Accuracy
4000A
6.0" Window
5A Output
2% Accuracy
Solid Core - Round Metering Grade, 600V, 0.3 % Accuracy
200A
1.25" Window
5A Output
300A
1.25" Window
5A Output
400A
1.25" Window
5A Output
500A
1.25" Window
5A Output
600A
1.25" Window
5A Output
800A
1.25" Window
5A Output
1000A
1.25" Window
5A Output
100A
2.25" Window
5A Output
200A
2.25" Window
5A Output
300A
2.25" Window
5A Output
400A
2.25" Window
5A Output
800A
4.0" Window
5A Output
1000A
4.0" Window
5A Output
1200A
4.0" Window
5A Output
1600A
4.0" Window
5A Output
2000A
4.0" Window
5A Output
3200A
6.5" Window
5A Output
4000A
6.5" Window
5A Output
Solid Core - Round Metering Grade, 600V, 0.3 % Accuracy
100A
1.75" x 2.47", 1" Window
5A Output
200A
1.75" x 2.47", 1" Window
5A Output
250A
1.75" x 2.47", 1" Window
5A Output
300A
1.75" x 2.47", 1" Window
5A Output
400A
1.1" x 3.56", 1.56" Window
5A Output
600A
1.1" x 3.56", 1.56" Window
5A Output
800A
1.1" x 3.56", 1.56" Window
5A Output
1000A
1.1" x 3.56", 1.56" Window
5A Output
2000A
1.15" x 5.73", 3.25" Window
5A Output
2500A
1.15" x 5.73", 3.25" Window
5A Output
3000A
1.15" x 5.73", 3.25" Window
5A Output
4000A
1.15" x 5.73", 3.25" Window
5A Output
Catalog Number
PDS-CTSC-011
PDS-CTSC-021
PDS-CTSC-031
PDS-CTSC-042
PDS-CTSC-062
PDS-CTSC-082
PDS-CTSC-013
PDS-CTSC-123
PDS-CTSC-163
PDS-CTSC-02R
PDS-CTSC-03R
PDS-CTHC-024
PDS-CTHC-034
PDS-CTHC-044
PDS-CTHC-064
PDS-CTHC-084
PDS-CTHC-124
PDS-CTHC-306
PDS-CTHC-206
PDS-CTHC-406
PDS-CTRC-021
PDS-CTRC-031
PDS-CTRC-041
PDS-CTRC-051
PDS-CTRC-061
PDS-CTRC-081
PDS-CTRC-101
PDS-CTRC-012
PDS-CTRC-022
PDS-CTRC-032
PDS-CTRC-042
PDS-CTRC-084
PDS-CTRC-104
PDS-CTRC-124
PDS-CTRC-164
PDS-CTRC-204
PDS-CTRC-326
PDS-CTRC-426
SMU-CT-011
SMU-CT-021
SMU-CT-025
SMU-CT-031
SMU-CT-041
SMU-CT-061
SMU-CT-081
SMU-CT-123
SMU-CT-02R
SMU-CT-25R
SMU-CT-30R
SMU-CT-40R
Voltage Transformers - Metering Grade, 600V and 5KV, +/- 1% Accuracy at all burdens
up to 5VA at 1.0 and .95 pf
8-10
Catalog Number
Description
Primary
Secondary
467-480
467-288
PTW3-2-60-242
PTW5-2-110-722
Potential Transformer (4:1)
Potential Transformer,277:120V L-N 2.4:1
Potential Transformer, 2 BUSHINGS, NO FUSES
Potential Transformer, 2 BUSHINGS, NO FUSES
480 V
277 V
2400 V
7200 V
120 V
120 V
120 V
120 V
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Totally Integrated Power
Application Engineering Services & Training
General
Training Center in Norcross, Georgia
Siemens’ Power Distribution
Solutions group can provide
engineered solutions, not just
great products.
Siemens PDS Application Engineers are
power monitoring experts experienced
in all industrial and commercial power
applications. Our engineers are the best
qualified to ensure that power monitoring
systems are properly installed and
commissioned.
For your specific needs, please consult
factory.
Additionally, integration into Eaton/CutlerHammer, Square D PowerLogic, General
Electric, Rockwell, PML and many other
systems can be accomplished in a
number of ways. Please give us a call
to discuss our specific requirements.
POWER
MONITORING
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
8
Here is a brief summary of what we do:
▪ Power Quality & Reliability Analysis
▪ Utilities Cost Allocation and Billing
▪ Load Studies & Circuit Optimization
▪ Demand & Power Factor Control
▪ Equipment Monitoring & Control
▪ Preventative Maintenance & Reporting
▪ Design, Start-up & Commissioning
▪ Factory certify power monitoring
system operation
▪ System drawings and device
documentation
▪ Optimally configure each power
monitoring device (set-up, data logging,
communications, event-capture,
customized web-server pages, etc.)
▪ Workstation software setup and
configuration
▪ Other customized work per customer
requirements (custom screen
configuration, networks, alarming, etc.)
▪ Technical support
▪ Overview and thorough “hands-on”
operator training on their own
systems
▪ Additional, higher-level training can be
tailored to suit individual customer
needs at Siemens’ training facility in
Norcross, GA or on-site
8-11
POWER
MONITORING
8
Notes
8-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
9SPEEDFAX
TM
2007-2008 TVSS
Contents
TPS General Information
(For Internal Equipment Mounted, Consult Factory)
9-2
External or Remote Mounted Unit Selection
TPS 9, TPS 10
9-3 – 9-4
TPS 11, TPS 12 and TPS 16
9-5 – 9-7
9
TVSS
Residential Commercial Industrial
TVSS - Transient Voltage Surge Suppressors
TPS - Transient Protection System
Siemens offers surge suppression products to provide for multi–stage protection.
Why have multi-stage protection? High
voltage surges enter your systems as the
result of utility switching, lightning strikes
and low voltage transients caused by internal equipment such as motors and compressors. All of these surges can destroy
sensitive electronic equipment.
The Siemens TPS system has products to
fit at every level of the electrical distribution
system.
INTEGRAL
Factory Installed Option
▪ Pre-wired and Protection Ready
▪ Priced & Configured with Specified Gear
▪ Field Replaceable Design
▪ UL Listed
Contact Factory for More Information
and Current Specifications.
Lighting Panel Mounted Units - P1, P2
& P3
TVSS
9
TPS 1
Standard Features:
▪ Retrofit capabilities
▪ Direct Bus Connection
▪ 120kA, 160kA & 240kA
▪ LED Indication, Audible Alarm & Dry
Contacts
▪ All Modes of Protection
Surge Counter & Remote Monitor Options.
TPS 1 (SAD & SAD/MOV Hybrid)
Standard Features:
▪ Retrofit capabilities
▪ Direct Bus Connection
▪ 20kA, 90kA, 130kA & 170kA
▪ LED Indication, Audible Alarm & Dry
Contacts
▪ All Modes of Protection
Surge Counter & Remote Monitor Options.
TPS 11
Standard Features:
▪ Breaker Fed (30-50 amp)
▪ 120kA & 160kA (voltage sensitive)
9-2
▪ LED Indication, Audible Alarm & Dry
Contacts
▪ All Modes of Protection
Surge Counter & Remote Monitor Options.
TPS 9
Standard Features:
▪ Breaker Fed (20 amp)
▪ 80kA & 100kA
▪ LED Indication
Distribution Panel and Distribution
Section Switchboard Mounted Unites
P4 and P5 and front connected
distribution section switchboard
applications
TPS 5
Standard Features:
▪ Close Connection to Panel Bus
▪ 160kA & 240kA
▪ LED Indication, Audible Alarm & Dry
Contacts
▪ Integral Disconnect Switch
▪ All Modes of Protection
Surge Counter & Remote Monitor Options.
Service Section and Switchgear
Mounted Units - S1, S2, S3 or RCIII
Switchboards
TPS 6
Standard Features:
▪ Mounted in Customer Instrument
Compartment
▪ 240kA, 320kA & 400kA
▪ LED Indication, Audible Alarm & Dry
Contacts
▪ Integral Disconnect Switch
▪ All Modes of Protection
Surge Counter & Remote Monitor Options.
Motor Control Mounted Units - 6 inch
and 18 inch MCC Bucket Applications
TPS MCC
Standard Features:
▪ 6" Compact Design Installed in a Section
▪ 160kA & 240kA
▪ Racking Lever Disconnect
▪ Audible Alarm
▪ Modular
EXTERNAL
For Remote Wall Mounting Applications
▪ Factory Quick Ship
▪ Fully Assembled
▪ EMI / RFI Filtering
▪ UL Listed
Contact Factory for More Information
and Current Specifications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
General
TPS 9
Close Coupling to Distribution Equipment
Standard Features:
▪ Breaker Fed (20 amp)
▪ 80kA, 100kA, 120kA & 150kA (voltage
sensitive)
▪ LED Indication
▪ NEMA 4X Enclosure
Flush Mounting Option.
TPS 10
Close Coupling to Distribution Equipment
Standard Features:
▪ Breaker Fed (30-50 amp)
▪ 50kA
▪ LED Indication
▪ NEMA 4X Enclosure
▪ All Modes of Protection
Audible Alarm, Dry Contacts, Remote
Monitor & Flush Mounting Options.
TPS 11
Close Coupling to Distribution Equipment
Standard Features:
▪ Breaker Fed (30-50 amp)
▪ 80kA, 120kA & 160kA (voltage sensitive)
▪ LED Indication
▪ NEMA 4X Enclosure
▪ All Modes of Protection
Audible Alarm, Dry Contacts, Remote
Monitor & Flush Mounting Options.
TPS 12
Close Coupling to Service Entrance and
Distribution Equipment
Standard Features:
▪ Breaker Fed (30-50 amp)
▪ 80kA, 120kA & 160kA (voltage sensitive)
▪ LED Indication
▪ NEMA 4X Enclosure
▪ All Modes of Protection
Internal Disconnect Switch, Surge Counter,
Dual Surge Counter, Remote Monitor, 3, 4,
4X & Flush Mounting Options.
TPS 16
Close Coupling to Distribution Equipment
Standard Features:
▪ Breaker Fed (30-50 amp)
▪ 120kA, 180kA & 240kA
▪ 10 - Mode Protection Design
▪ NEMA 4X Enclosure
Dry Contacts, Surge Counter, Audible
Alarm, & Remote Monitor Options.
TVSS - Transient Voltage Surge Suppressors
TPS 9 - Transient Protection System
Selection
TPS 9
Transient Protection System for Sensitive
Electronic loads. Externally mounted to
Electrical Distribution Equipment.
FEATURES
▪ UL 1449 Second Edition Revision
effective Feb. 9, 2007 (aka UL 1449 Rev
2.5). Designed and tested in accordance
with IEEE C62.41.1, C62.41.2, and C62.45
▪ UL 1449 Rev 2.5 listed for 200kA SCCR
applications or below. In compliance with
NEC Article 285.6
▪ Modes of protection: L-N, L-G, and L-L
▪ Multistage protection circuit
▪ Fast acting 20mm MOV’s
▪ NEMA4X Standard Enclosure
▪ LED indicators for immediate status
monitoring
▪ Dimensions: 8" x 3" x 3"
▪ Weight: 4 lbs.
AVAILABLE OPTIONS
▪ Flush Mount
ORDERING INFORMATION
Catalog#
TPS 09
Voltage Code
A = 120/240V 1Ø 3W
B = 240/120V 3Ø 4W
C = 208Y/120V 3Ø 4W
D = 240V 3Ø 3W
E = 480Y/277V 3Ø 4W
F = 480V 3Ø 3W
K = 380Y/220V 3Ø 4W
Surge Current (kA)
080
100
120**
150**
Options (*)
L = Remote LED
D = Dry Contact
F = Flush Mount
N = Noise Filter
T = Adds N-G (Gas Tube)
9
* When an option is not selected, include a zero (0) in the option field
**Only for voltage codes A and C
TVSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
9-3
TVSS - Transient Voltage Surge Suppressors
TPS - Transient Protection System
Selection
TPS 10
Transient Protection System for Sensitive
Electronic loads. Externally mounted to
Electrical Distribution Equipment.
FEATURES
▪ UL 1449 Second Edition Revision
effective Feb. 9, 2007 (aka UL 1449 Rev
2.5). Designed and tested in accordance
with IEEE C62.41.1, C62.41.2, and C62.45
▪ Patented TranSafe™ Circuitry Design
incorporating thermal cutouts and surge
rated fuses
▪ UL 1449 Rev 2.5 listed for 200kA SCCR
applications or below. In compliance with
NEC Article 285.6
▪ All modes of protection: L-N, L-G, L-L,
& N-G
▪ Multistage protection circuit
▪ Fast acting 20mm MOV’s
▪ NEMA 4X Standard Enclosure
▪ LED indicators for immediate status
monitoring
▪ Dimensions: 6" x 6" x 4"
▪ Weight: 8 lbs.
AVAILABLE OPTIONS
▪
▪
▪
▪
Audible Alarm
Dry Contacts
Flush Mount
Remote Monitor
ORDERING INFORMATION
TVSS
9
Catalog#
TPS 10050
Voltage Code
A = 120/240V 1Ø 3W
B = 240/120V 3Ø 4W
C = 208Y/120V 3Ø 4W
E = 480Y/277V 3Ø 4W
Options (*)
R = Remote Monitor
D = Dry Contacts
F = Flush Mount
A = Audible Alarm
* When an option is not selected, include a zero (0) in the option field
9-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
TVSS - Transient Voltage Surge Suppressors
TPS - Transient Protection System
Selection
TPS 11
Transient Protection System for Sensitive
Electronic loads. Externally mounted to
Electrical Distribution Equipment.
FEATURES
▪ UL 1449 Second Edition Revision
effective Feb. 9, 2007 (aka UL 1449 Rev
2.5). Designed and tested in accordance
with IEEE C62.41.1, C62.41.2, and C62.45
▪ Patented TranSafe™ Circuitry Design
incorporating thermal cutouts and surge
rated fuses
▪▪ UL 1449 Rev 2.5 listed for 200kA SCCR
applications or below. In compliance with
NEC Article 285.6
▪ All modes of protection: L-N, L-G, L-L,
& N-G
▪ Multistage protection circuit
▪ Fast acting 20mm MOV’s
▪ NEMA4X Standard Enclosure
▪ LED indicators for immediate status
monitoring
▪ Dimensions: 6" x 6" x 4"
▪ Weight : 8 lbs.
AVAILABLE OPTIONS
▪
▪
▪
▪
Audible Alarm
Dry Contacts
Flush Mount
Remote Monitor
ORDERING INFORMATION
Catalog#
TPS 11
Surge Current (kA)
080
120**
160***
Options (*)
R = Remote Monitor
D = Dry Contacts
F = Flush Mount
A = Audible Alarm
9
TVSS
Voltage Code
A = 120/240V 1Ø 3W
B = 240/120V 3Ø 4W
C = 208Y/120V 3Ø 4W
D = 240V 3Ø 4W
E = 480Y/277V 3Ø 4W
F = 480V 3Ø 3W
G = 600V 3Ø 3W
K = 380Y/220V 3Ø 4W
L = 600Y/347V 3Ø 4W
*When an option is not selected, include a zero (0) in the option field
** Only for voltage codes A, B, C, E, K and L
*** Only for voltage codes A, B, C, E and K
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
9-5
TVSS - Transient Voltage Surge Suppressors
TPS - Transient Protection System
Selection
TPS 12
Transient Protection System for Sensitive
Electronic loads. Externally mounted to
Electrical Distribution Equipment.
FEATURES
▪ UL 1449 Second Edition Revision
effective Feb. 9, 2007 (aka UL 1449 Rev 2.5).
Designed and tested in accordance with IEEE
C62.41.1, C62.41.2, and C62.45
▪ Patented TranSafe™ Circuitry Design
incorporating thermal cutouts and surge
rated fuses
▪ UL 1449 Rev 2.5 listed for 200kA SCCR
applications or below. In compliance with
NEC Article 285.6
▪ All modes of protection: L-N, L-G, L-L, & N-G
▪ Multistage protection circuit
▪ Fast acting 40mm MOV’s
▪ Standard monitoring: LED Indicators, Audible
Alarm, and Dry Contacts
NEMA
12 Standard Enclosure:
▪
Standard
10" x 10" x 5"
W/Disconnect
12" x 12" x 5"
Flushmount
12" x 12" x 6"
Weight
21 lbs.
AVAILABLE OPTIONS
▪
▪
▪
▪
Surge Counter
▪ Internal Disconnect
Remote Monitor
▪ NEMA3R, 4, and 4X
(may increase
Flush Mount
enclosure size)
Dual Surge Counter
ORDERING INFORMATION
TVSS
9
Catalog#
TPS 12
Voltage Code
A = 120/240V 1Ø 3W
B = 240/120V 3Ø 4W
C = 208Y/120V 3Ø 4W
D = 240V 3Ø 3W
E = 480Y/277V 3Ø 4W
F = 480V 3Ø 3W
G = 600V 3Ø 3W
K = 380Y/220V 3Ø 4W
L = 600Y/347V 3Ø 4W
Surge Current (kA)
120
160
240
*When an option is not selected, include a zero (0) in the option field
9-6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Options (*)
R = Remote Monitor
D = Disconnect
03 = NEMA 3R
04 = NEMA 4
4X = NEMA 4X
F = Flush Mount
S = Surge Counter
2 = Dual Counter
TVSS - Transient Voltage Surge Suppressors
TPS - Transient Protection System
Selection
TPS 16
Discrete 10-Mode Transient Protection
System for Sensitive Electronic loads.
Externally mounted to Electrical Distribution
Equipment.
FEATURES
▪ UL 1449 Second Edition Revision
effective Feb. 9, 2007 (aka UL 1449 Rev 2.5).
Designed and tested in accordance with IEEE
C62.41.1, C62.41.2, and C62.45
▪ Patented TranSafe™ Circuitry Design
incorporating thermal cutouts and surge
rated fuses
▪ UL 1449 Rev 2.5 listed for 200kA SCCR
applications or below. In compliance with
NEC Article 285.6
▪ All modes of protection: L-N, L-G, L-L,
& N-G
▪ Multistage protection circuit
▪ Fast acting 20mm MOV’s
▪ Standard monitoring: LED Indicators for
immediate status monitoring, Red
Service LED
▪ NEMA 4X Standard Enclosure:
Standard
10" x 8" x 6"
Weight
15 lbs.
AVAILABLE OPTIONS
▪ Remote Monitor
▪ Dry Contact
▪ Surge Counter
▪ Audible Alarm
ORDERING INFORMATION
Catalog#
TPS 16
Options (*)
R = Remote Monitor
D = Dry Contact
S = Surge Counter (&
Switched Audible Alarm)
A = Audible Alarm
TVSS
Surge Current (kA)
120
180
240
9
Voltage Code
A = 120/240V 1Ø 3W
B = 240/120V 3Ø 4W
C = 208Y/120V 3Ø 4W
E = 480Y/277V 3Ø 4W
K = 380Y/220V 3Ø 4W
*When an option is not selected, include a zero (0) in the option field
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
9-7
TVSS
9
Notes
9-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10SPEEDFAX
TM
2007-2008 Panelboards
Contents
PANELBOARDS
Residential Commercial Industrial
10-2 – 10-8
10-9 – 10-14
10-15
10-16
10-17 – 10-22
10-17
10-18
10-19
10-20 – 10-21
10-22
10-23 – 10-32
10-23
10-24
10-25
10-26
10-27
10-28 – 10-31
10-32
10-33 – 10-43
10-33
10-34
10-35 – 10-36
10-37 – 10-38
10-39 – 10-42
10-43
10-44 – 10-54
10-44
10-44 – 10-46
10-47
10-48
10-49 – 10-50
10-51 – 10-53
10-54
10-55 – 10-65
10-55
10-56
10-57
10-58
10-59
10-60
10-61 – 10-64
10-65
10-66 – 10-69
10-70
10-71 – 10-73
10-71
10-71
10-72
10-73
10
Features, Reference Guide & General Specifications
Unassembled Panelboards
Factory Assembled Panelboard Coding System
Factory Assembled Panelboard Pricing
Type P1
Specifications
Main Lug and Main Breaker
Branch and Subfeed Breakers
Modifications and Additions
Enclosure Dimensions
Type P2
Specifications
Enclosure Selection
Alternate Main and Subfeed Breakers
Branch Breakers
Main Lug and Main Breaker
Modifications and Additions
Enclosure Dimensions
Type P3
Specifications
Enclosure Selection
Alternate Main, Branch and Subfeed Breakers
Main Lug and Main Breaker
Modifications and Additions
Enclosure Dimensions
Type P4
Specifications
Enclosure Selection
Main Lug and Main Breaker
Main Switch and Alternate Main Breakers
Branch Devices – Circuit Breaker and Switch
Modifications and Additions
Enclosure Dimensions
Type P5
Specifications
Enclosure Selection
Main Lug and Main Breaker
Alternate Main Breaker and Main Switch
Branch Breakers
Branch Switches
Modifications and Additions
Enclosure Dimensions
Column Type Panelboards
Telephone and Equipment Cabinets
Panelboard Modifications and Additions
Enclosures—Relay Cabinets, NEMA 4X
Remote Switches—ASCO, LEN
Circuit Breaker Modifications, Obsolete Kits
Circuit Breaker Accessories & Panel Skirts
Panelboards
Introduction
General
Features Overview
The new generation of products from an
outstanding ancestry represents the high
level of engineering innovation expected
from Siemens. Additional strength has
been added to an already rugged and
durable panelboard family. This product
has added flexibility and is easier to install.
These newer designs also simplify wiring
and reduce material requirements, saving
additional installation time.
those tight areas, the P3 panel packs
the power of a distribution panel.
The newly defined “P Series” of panels
offer a stepped approach to power
distribution. Anchored at one end with the
innovative P1 that offers the industries
most flexible designs to virtually eliminate
the impact of common mistakes like feed
direction, main lug versus main breaker.
Adding distribution is also easy with the
ability to add feed-thru lugs. With a
minimum number of enclosures (six sizes),
the P1 fits the majority of the lighting panel
needs in a cost-effective package.
Siemens also offers a number of specialty
panels like column panels. Don’t see your
requirement met? Ask a Siemens
representative to tell you about our
custom capabilities.
The next step in the series and with
subsequent steps, offers increased
capacity and options. The P2 offers
maximum flexibility and options to fit
the most demanding specifications.
The P3 is another flexible and innovative
panel. Sized more like a lighting panel for
The P4 offers a mid-sized distribution
panel and allows fusible as well as circuit
breaker branch and main devices.
The P5 anchors the other end of the series.
Larger fusible and circuit breaker branch
and main devices give maximum power
to the distribution system.
Siemens offers a complete line of lighting,
and power distribution panelboards. At
the heart of the product line is the
extensive research and technology found
among Siemens circuit protection devices
– both fusible switches and molded case
circuit breakers.
The lighting panel design still features the
Fas-Latch trim that is popular with installers,
the jacking screw system that permits
adjustments even after wiring has been
installed, and other features such as
exclusive split neutral. Many panelboards
have the capability of mixing and matching
breakers of different sizes and ratings – or
changing from main lug to main breaker,
or adding subfeed breakers without
changing box size. Other models accept
a wide range of fuse types, including
Siemens exclusive Vacu-Break®
technology.
Key Panelboard Features
P1
P2
P3
P4
P5
Lighting And Appliance Applications
•
Power Panelboard Applications
—
•
•
•
•
•
•
•
•
Convertible From Top Feed To Bottom Feed Or Vice Versa
•
—
—
—
—
•
—
—
—
—
Up To 250 Amps
•
•
•
•
•
•
•
•
•
Change From Main Lug To Main Breaker Or
Add Subfeed Without Changing Enclosure Size
Space-Saving, Horizontally Mounted Main Breaker
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
—
•
•
•
•
•
•
•
•
•
Up To 250 Amps Up To 250 Amps
Short-Circuit Rating Label Giving Performance Level
Standard Aluminum Ground Assembly
Blank End-Walls Standard
Bolted Current-Carrying Parts
Split Neutral
Connection Accessible From Front
Screw-Type Mechanical Lugs
Time-Reducing Wing Nuts To Secure Interior Without Tools
Main and Branch Devices Connected With
Case-Hardened Hardware
Flush Lock, Concealed Door Hinges/Trim Screws
—
—
—
•
•
•
5.75"
5.75"
7.75"
10.00"
12.75"
10
Accepts A Wide Range Of Fuse Types
—
—
—
Accepts Vacu-Break Fusible Switch
—
—
—
PANELBOARDS
Symmetrical Interior Mounting Studs
To Eliminate Upside-Down Mounting of Box
Accepts A Wide Range Of Circuit Breakers
—
Accepts ACCESS™ Communications Tie-In
—
Optional Compression Lugs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Interior Height Adjustment For Flush Applications
Mix and Match Fusible Switch Circuit Breaker Capability
Shallow Depth (Standard)
Panelboards
• Standard
KOs available on P1 and P2 — 5.75" deep X 20" wide
boxes and P3 7.75" deep X 24" wide boxes.
10-2
equipped with Siemens Sensitrip® circuit
breakers or Power Meters can be integrated into
Siemens ACCESS™ electrical monitoring systems.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Features / Benefits
Reference
The standard Siemens P1 panelboard has some unique features that make it easier to design for an engineer, easier to
reconfigure in the field for a contractor, and easier to upgrade and maintain for the Owner. The P1 is the smallest panel in the
Siemens lineup, with bus sizes up to 400A. What makes it different is it’s split neutral design and it’s open ended bus. In the
Siemens panel, instead of the common single neutral bus on one end, we have a neutral bus on both sides that is cross-bussed.
This makes branch wiring simpler and cleaner – the lead lengths for line and neutral can now be made the same, creating more
room and a neater installation. It also allows access to both ends of the bus as a standard feature – this provides the flexibility to
make changes in the field, even if it wasn’t part of the original configuration.
MAIN BREAKER or SUB-FEED BREAKER
MAIN LUGS or FEED-THROUGH LUGS
INTEGRAL BUS MOUNTED TVSS
The following can be done to a standard P1 panelboard in the field with no modifications:
Change from top fed to bottom fed
Add feed-through lugs
Add an Integral bus-mounted TVSS
Add a sub feed breaker up to 250 amps
Change from Main Lugs to Main Breaker
Change from Main Breaker to Main Lugs
Panel may have up to two ground assemblies. Options are standard aluminum, copper, insulated or isolated aluminum or
copper. Mounting provisions in opposing corners of the box are standard. Any of these options may be added after
installation.
PANELBOARDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10
▪
▪
▪
▪
▪
▪
▪
10-3
Panelboards
Trim
Options
Standard Trim (FAS-Latch)
PANELBOARDS
10
Door in Door Front
Hinged Front
10-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Special Enclosures
Options
NEMA 3R Enclosures
NEMA 4X Enclosures
Panel Family Portrait
10
PANELBOARDS
“P” Series Panelboard Family for Lighting and Appliance and Distribution Panel Applications
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-5
Panelboards
PANELBOARDS
10
General Specifications
Class CTL Panelboards
Class CTL panelboards incorporate
physical features which, in conjunction
with the physical size, configuration, or
other means provided in Class CTL circuit
breakers, are designed to prevent the
installation of more over current
protective poles than that number for
which the device is designed and rated,
per UL 67 and National Electrical Code
(NEC) NFPA70.
Service Entrance Equipment
When a panelboard is used as service
entrance equipment, it must be located
near the point of entrance of building
supply conductors. In a main lugs only
panel, the number of breakers
or switches directly connected to the
main bus must be limited to six. In a
panel having a main breaker or main
switch, the number of circuits are not
limited except as may be provided under
other panelboard requirements, i.e.,
lighting and appliance branch circuit
panelboards. Also, panels must include
a connector for bonding and grounding
neutral conductor.
Panelboard Code Data
42-Circuit Rule: NEC Paragraph 408.34
defines a lighting and appliance branch
circuit panelboard as one having more
than 10 percent of its over current
devices rated 30 amperes or less, for
which neutral connectors are provided.
NEC paragraph 408.35 states that not
more than 42 over current devices (other
than those provided in the mains) of a
lighting and appliance branch-circuit
panelboard shall be installed in any one
cabinet. For the purpose of this article,
a two pole circuit breaker shall be
considered two over current devices;
a three pole circuit breaker shall be
considered three over current devices.
(NEC 408.34 and 408.35 do not apply to
panelboards feeding and communication
circuits. Panelboards for this application
must be so marked.)
Integrated Equipment Short Circuit
Rating
The term “Integrated Equipment Short
Circuit Rating” refers to the application
of series connected circuit breakers in
combination that allows some breakers
to have lower individual interrupting
ratings than the available fault current.
This is permitted as long as the series
combination has been tested and certified
by UL.
Standards
NEC:
2005
NEMA: PB1
UL: 67 and 50. Listed by Underwriter’s
Laboratories, Inc., under “Panelboards”
File #E2269, and #E4016. Meets
Federal Specification W-P-115c.
10-6
General
Wire Connectors
Standard wire connectors in Siemens
panels are suitable for copper or
aluminum cables rated 60/75 degree.
Copper main lugs are price added option
for most panel types and some Circuit
Breakers (check with Siemens sales for
availability). It should be noted that most
copper lugs will only accept copper
cables. Some applications, 100% rated
devices in particular, require that the
cable and connectors be rated 90 degree
but are sized to the 75 degree tables.
Grounds
Standard ground connectors are also
suitable for copper or aluminum wire.
Ground connector assemblies (EGK, IGK)
have (7) 1/0 max. and (15) #6 max.
connections. The 1/0 holes are capable
of connecting up (3) #10 max. wires.
Copper ground assemblies (ECGK, ICGK)
are rated for copper wire only and
have the same wiring capacity as the
Al/Cu connectors.
Neutral Connectors
Standard neutrals, like standard
main lugs, are also rated for copper
or aluminum wire. The neutral cross
bar material follows the selection bus.
Copper neutral lugs are rated for copper
cable only and available as a price added
option.
Panel Mounting
Wall
Shown mounted in wall
Wall
Shown mounted on surface of wall
Space Required for Mounting of
Double Panels
Use two or more panelboards with
feed-thru or subfeed lugs when:
1. Lighting and appliance panelboards
are required with more than 42 circuits.
2. More circuit mounting space is
required than is provided in the largest
box size.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Feed-Thru Lugs
Subfeed Lugs or Double Lugs
Feed-thru lugs are mounted at the
opposite end of the main bus from the
main lugs or main breaker and are used
to connect two or more panelboards to
the incoming feeder. The feeder cables
are brought into Panelboard 1 and
connected to the main lugs or main
breaker. Cables interconnecting the
two panelboards are connected to the
feed-thru lugs in Panelboard1 and are
carried over the main lugs in Panelboard
2. This arrangement could be reversed
with the main lugs located at the top
and the feed-thru lugs at the bottom
of the panel. Subfeed lugs are mounted
directly beside the main incoming lugs
and are used to connect two or more
panelboards to the incoming feeder.
The feeder cables are brought into
Panelboard 1 and connected to the main
lugs. Another set of cables that are the
same size are connected to the subfeed
lugs of Panelboard 1 and are carried over
the main lugs of Panelboard 2.
Panelboards
General Specifications
General
As standard, branch breakers shall be
mounted at the top of the panel with
“spaces” at the bottom, regardless of
the direction panel is fed.
Bussing Sequence
Interiors are designed to accommodate
top or bottom feed. Regardless of
which is specified, the uppermost pole
is always on “A” phase; the second
pole down is always on “B” phase, and
the third pole down is always on ”C”
phase (assuming 3Ø panel).
Circuit Breaker Lighting
Panel Type P1
Circuit Breaker Lighting or
Distribution Panel Types P2/P3
All breakers have bolted connections
except plug-in type. The panel design
provides bracing up to 200,000A IR UL
short circuit rating. Case-hardened, high
performance, thread rolling screws are
used on branch bus.
Circuit Breaker Distribution
Panel Type P4/P5
Fusible Switch Distribution
Panel Type P4/P5
Panelboard Ratings
P1
P2
P3
P4
P5
Max. Voltage
600V AC Max.
500V DC Max.
1-Phase, 2-Wire
1-Phase, 3-Wire
3-Phase, 3-Wire
3-Phase, 4-Wire
125A-600A
100A-600A
—
600V AC Max.
500V DC Max.
1-Phase, 2-Wire
1-Phase, 3-Wire
3-Phase, 4-Wire
3-Phase, 3-Wire
250A-800A
225A-600A
—
600V AC Max.
500V DC Max.
1-Phase, 3-Wire
3-Phase, 4-Wire
3-Phase, 3-Wire
600V AC Max.
500V DC Max.
1-Phase, 3-Wire
3-Phase, 4-Wire
3-Phase, 3-Wire
Main Lugs
Main Breaker
Main Switch
480Y/277V AC Max.
250V DC Max.
1-Phase, 2-Wire
1-Phase, 3-Wire
3-Phase, 3-Wire
3-Phase, 4-Wire
125A-400A
100A-400A
—
400A-1200A
400A-800A
100A-200A
800A-1200A
800A-1200A
400A-1200A
Circuits
18, 30, 42
18, 30, 42, 54
—
—
—
Branch Ratings
15-125A
15-225A
15-600A
15-600A C/B
30-200A Fusible
15-1200A C/B
30-1200 Fusible
Branch
Disconnect
Devices
BL, BLH, HBL, BQD,
NGB, BQD6, BLE,
BLEH, BLF, BLHF, BAF,
BAFH, BGL
BL, BLH, HBL, BQD,
NGB, NEB, HEB, BQD6,
QJ2, HQJ2, QJ2H,
HQJ2H , ED4, HED4, ED6,
HHED6, BLE, BLEH, BLF,
BLHF, BAF, BAFH, BGL
BL, BLH, HBL, BQD, NGB,
NEB, HEB, BQD6, QJ2,
HQJ2, QJ2H, HQJ2H ,
ED4, HED4, ED6,
HHED6, BLE, BLEH, BLF,
BLHF, BAF, BAFH, BGL
All 15-600A
Breakers and MG at
800 Amps, 30-200A
Fusible Switches
All 15-1200A C/B
30A-200A VB Switches
400-1200A HCP
Switches
Subfeed
Circuit
Breakers
NGB, ED4, ED6, HED4,
HED6, QJ2, QJH2,
QJ2-H, FXD6, FD6,
HFD6, HFXD6
JD6, JXD6, HJD6,
HJXD6, FD6, HFD6,
FXD6, HFXD6
JD6, JXD6, HJD6,
FD6, HFD6, FXD6,
HFXD6
—
—
Enclosure
Heights
Inches – (mm)
32, 38, 44 @250A
(813, 965, 1118)
56, 62, 68 @400A
(1422, 1575, 1727)
26, 32, 38, 44, 50, 56,
62, 68, 74
(660-1880)
56, 62, 68, 74, 80
(1422-2032)
60, 75, 90
(1524, 1905, 2286)
60, 75, 90
(1524, 1905, 2286)
Standard
Trims
Fas-Latch – 1 Piece
Surface or Flush
Fas-Latch – 1 Piece
Surface or Flush
Fas-Latch – 1 Piece
Surface or Flush
Four Piece
Surface
Four Piece
Surface
System
Functional pricing is based on circuits shown.
However, the panel can be figured with less circuits.
P1 can have (1) subfeed breaker. P2 and P3 can have
up to (2) FD subfeed breakers.
JD and FD breakers are mounted vertical. Limitations
apply.
Trim
ring provided for flush applications.
maximum of (4) QJ breaker may be mounted in a P2
Panel and are single mounted.
A maximum of (6) QJ breakers may be mounted in a P3
panel and are twin mounted.
A
P1 panels with NGB breakers are limited to NGB
branch devices only. BL and BQD frames may not be
mixed in this panel type.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-7
PANELBOARDS
10
Description
Panelboards
General Specifications
General
Typical Panelboard Modifications
Lighting and Distribution Panelboards
P1
P2
Description
Box
Type 3R/12
Type 4, 4X
Drip Proof
Drip Proof Hood Only
Sealed Box
Gasketed Trim
Wider Box
Deeper Box
•
•
•
•
•
•
•
—
•
•
•
•
•
•
•
•
Front
Hinged Front
Door-in-Door Front
Common Front
Split Door
Special Locks
Nameplate
•
•
•
•
•
•
•
•
•
•
•
•
Interior
Aluminum Equipment Ground Bar
Copper Equipment Ground Bar
Insulated Equipment Ground
Subfeed Lugs
Feed-Thru Lugs
Split Bus
Compression Lugs
Copper Lugs
200% Neutral
Aluminum 햲
햲
Standard
Standard
•
•
—
•
—
•
•
•
P3
Distribution Panelboards
P4
P5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
—
—
—
Standard
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
•
•
•
•
Standard
Standard
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
Check Plant For
Availability
Standard
Check Plant For
Availability
Standard
Temperature Rated Temp. Rise Over Ambient - Copper
750 Ampere / in. - Aluminum 햲
1000 Ampere / in. - Copper
Standard
Copper Plating - Silver or Tin
Tin
Tin Std./
Silver Optional
Tin Std./
Silver Optional
Silver Std./
Tin Optional
Silver Std./
Tin Optional
Remote Control Switches
Time Clocks
Circuit Breaker Shunt Trips
R, J and T Fuse Clips
External Mounted
External Mounted
•
•
•
•
•
•
•
—
—
—
•
•
•
•
•
•
•
•
All aluminum bus is tin-plated.
•
•
•
•
—
—
•
•
•
•
•
•
•
•
•
• Available as an option.
UL Fuse Classes 햲
Interrupting
Ratings (kA)
l 2 t, l i
Circuits
—
Less than 10,000A Available
l•t – RK5 up to 100A,
li – RK5 up to 100A
l•t – Low, li – Low
l•t – Slightly > J, li – Slightly > J
Feeder circuits
Feeder circuits (motor load small %)
Feeder circuits (motor load small %)
To 200
l•t – > RK-1, li – > RK-1
l•t – Low, li – Low
Non-Motor loads
200
l•t – Low, li – Low
Mains, feeder circuits
Class
Amperes
Volts
H
1-600
250 and 600V or less AC
10
K5 햳
1-600
250 and 600V or less AC
100
J
RK1
1-600
1/10-600
600V or less
600V or less and 250V or less
200
200
RK5
1/10-600
600V or less and 250V or less
200
T
1-800,
1-1200
300 and 600V or less AC
L
601-1200
600V or less
햲
Per UL 67.
Fuses do not prohibit the use of Class H type fuse in switch.
PANELBOARDS
10
햳
10-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Motor starting currents a factor
Panelboards
Unassembled
Reference
Catalog Numbering System
Type P1 unassembled panelboards are
completely convertible from main lug
to main breaker and vice-versa.
Additionally feed-thru lugs,
or a subfeed circuit breaker up to
400 amperes can be added without
increasing the box height. Follow these
easy steps to select and price the proper
P1 panel from stock:
4. List required branch circuit
breakers and filler plates to cover
any unused positions.
5. Select any modifications
or accessories.
6. Compute total list price.
1. Compute total number of poles to
determine interior catalog number.
2. List catalog number and price of
interior, box and front.
3. Select main lug kit or main breaker
kit from appropriate tables. Note:
Main/Subfeed Breaker mounting kits
may be ordered with or without
breakers included, see page 10-11
and 10-12 for selection.
P
1
X
1 8
䊱
䊱
䊱
䊱
䊱
M C
䊱
䊱
2 5 0
A
䊱
䊱
䊱
䊱
1. P1
2. Voltage and System
X = 208Y/120, 3-Phase 4-Wire
A = 120/240V, 1-Phase 3-Wire
E = 480Y/277V, 3-Phase 4-Wire
3, 4. Circuit – 18, 30, 42
5, 6. Mains MC = Convertible mains
Select Main Lug Kit or Breaker Mounting Kit from page 10-11—10-12
Select Main Breaker Kit from page 10-11—10-12
7, 8, 9. Amperage – 400A max
10. Main Bus Material
A = Aluminum
C = Copper
Note:Standard bussing in P1 panels is tin plated for aluminum and copper.
Standard bus is temperature rated to the maximum amperage in the panel.
Branch Breakers
Panel Type
P1
Voltage (Max.)
Breaker Type
240
BI, BLH, HBL, BQD
480/277
BQD
600/347
BQD
Speedfax Page
See section 6
10
PANELBOARDS
햲
Consult sales office for availability of CSA.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-9
Panelboards
Distributor Stock
Selection
Pricing An Unassembled Panel
400A Max. — 20" Wide x 5.75" Deep
1. Choose the appropriate Interior from
the table below.
2. Choose and price the Main Device:
Main Lugs from pages 10-11, Main
Breaker Kit from page 10-13 and Main
Breakers from Section 6.
3. Choose and price Branch Breakers.
BL, BQD and NGB breakers from
Section 6.
4. Choose and price Feed-Thru Lugs or
Subfeed Breaker Feed-Thru Lugs from
page 10-11, Subfeed Breaker Kit from
page 10-11, and Subfeed Breaker from
Section 6.
Type P1 Unassembled Panelboards
Convertible Mains — 1-Phase, 3-Wire
120 / 240V
Interiors Only–Less Branch Breakers
Total
List
Price $
Amperes
Rating
Mains
836.50
975.50
1201.50
Boxes
Fronts
Max. No
of Poles
Interiors
List
Price $
Height
(inches)
Type 1
250
18
30
42
P1A18MC250A
P1A30MC250A
P1A42MC250A
630.00
787.00
1042.00
32
38
44
B32
B38
B44
1303.00
1443.00
1669.00
400
18
30
42
P1A18MC400A
P1A30MC400A
P1A42MC400A
979.00
1138.00
1393.00
56
62
68
893.50
1066.50
1310.50
250
18
30
42
P1A18MC250C
P1A30MC250C
P1A42MC250C
694.00
889.00
1165.00
1389.00
1562.00
1806.00
400
18
30
42
P1A18MC400C
P1A30MC400C
P1A42MC400C
List
Price $
Type 3R/12햲
List
Price $
Surface
Flush
List
Price $
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
32
38
44
B32
B38
B44
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
1077.00
1272.00
1548.00
56
62
68
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
Convertible Mains — 3-Phase, 4-Wire
836.50
1068.50
1301.50
208Y /120V
250
18
30
42
P1X18MC250A
P1X30MC250A
P1X42MC250A
630.00
891.00
1154.00
32
38
44
B32
B38
B44
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
1373.00
1604.00
1838.00
400
18
30
42
P1X18MC400A
P1X30MC400A
P1X42MC400A
1059.00
1320.00
1584.00
56
62
68
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
896.50
1152.50
1402.50
250
18
30
42
P1X18MC250C
P1X30MC250C
P1X42MC250C
697.00
987.00
1269.00
32
38
44
B32
B38
B44
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
1489.00
1743.00
1994.00
400
18
30
42
P1X18MC400C
P1X30MC400C
P1X42MC400C
1190.00
1477.00
1760.00
56
62
68
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
250
P1E18MC250A
P1E30MC250A
P1E42MC250A
630.00
891.00
1154.00
32
38
44
B32
B38
B44
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
10
1373.00
1743.00
1838.00
400
18
30
42
P1E18MC400A
P1E30MC400A
P1E42MC400A
1059.00
1320.00
1584.00
46
62
68
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
896.50
1152.50
1402.50
250
18
30
42
P1E18MC250C
P1E30MC250C
P1E42MC250C
697.00
987.00
1269.00
32
38
44
B32
B38
B44
52.00
52.00
52.00
WP32
WP38
WP44
1690.00
1690.00
1690.00
S32B
S38B
S44B
F32B
F38B
F44B
262.00
262.00
262.00
1489.00
1743.00
1994.00
400
18
30
42
P1E18MC400C
P1E30MC400C
P1E42MC400C
1190.00
1477.00
1760.00
56
62
68
B56
B62
B68
107.00
107.00
107.00
WP56
WP62
WP68
1841.00
1841.00
1841.00
S56B
S62B
S68B
F56B
F62B
F68B
384.00
384.00
384.00
햲
836.50
1068.50
1301.50
480Y / 277V
18
30
42
PANELBOARDS
Convertible Mains — 3-Phase, 4-Wire
Front included in NEMA 3R Box.
10-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule UNPB
Panelboards
Distributor Stock
Selection
Type P1 Panelboards
Type P1 Panelboards
Lug Kits — Main or Feed Thru
Breaker Mounting Kits 250A Max. — Main or Subfeed w/o Breaker
Ampere
Rating
Material Wire Range
Service
Catalog
Number
List
Price $
(1) #6 AWG–350 kcmil
1-Phase MLKA1
Cu or Al
208.00
(1) #6 AWG–350 kcmil
3-Phase MLKA3
Cu or Al
262.00
(1) #6 AWG–350 kcmil
1-Phase MLKC1
Cu or Al
388.00
(1) #6 AWG–350 kcmil
3-Phase MLKC3
Cu or Al
500.00
Al
(2) 3/0 250 or
(1) 600 kcmil
1-Phase 4MLKA1
3-Phase 4MLKA3
791.00
879.00
Cu
(2) 3/0 250 or
(1) 600 kcmil
1-Phase 4MLKC1 1059.00
3-Phase 4MLKC3 1307.00
AI
250
Cu
400
Copper Neutral Lug Kits — 250A
Number
of Circuits Description
Catalog List
Number Price $
18
2 Branch Neutral Strips, 1 Main Neutral Lug,
CNLK18
Hardware
208.00
30
2 Branch Neutral Strips, 1 Main Neutral Lug,
CNLK30
Hardware
229.00
42
2 Branch Neutral Strips, 1 Main Neutral Lug,
CNLK42
Hardware
251.00
햲
Ampere
Rating
Breaker Types
Service
Catalog
Number
List
Price $
100A
BQD
3-Phase
MBKBC3
586.00
100A
BL, BLH, HBL
1-Phase
3-Phase
MBKBL1
MBKBL3
208.00
586.00
125A
NGB
1-Phase
3-Phase
MBKNB1
MBKNB3
498.00
1063.00
125A
ED4, ED6, HED4, HED6
1-Phase
3-Phase
MBKED1
MBKED3
498.00
1063.00
225A
QJ2, QJH2, QJ2-H
1-Phase
3-Phase
MBKQJ1
MBKQJ3
498.00
1063.00
250A
FXD6, FD6, HFD6
1-Phase
3-Phase
MBKFD1
MBKFD3
797.00
939.00
400A햲
JXD2, JD6, JXD6,
HJD6, HJXD6
1-Phase
3-Phase
MBKJD1
MBKJD3
2381.00
2755.00
400 amp kit is for main—only not allowed for subfeed breaker.
200% Neutral Lug Kits/250A
18
2 Branch Neutral Strips, 2 Main Neutral Lug,
2NLK18
Hardware
310.00
30
2 Branch Neutral Strips, 2 Main Neutral Lug,
2NLK30
Hardware
330.00
42
2 Branch Neutral Strips, 2 Main Neutral Lug,
2NLK42
Hardware
351.00
MBKQJ3
200% Neutral Lug Kits/400A and 600A
18
30
42
42NLK18
2 Branch Neutral Strips, 4 Main Neutral Lug,
42NLK30
Hardware
42NLK42
487.00
487.00
487.00
Type P1, P2, and P3 Panelboards
Miscellaneous Parts and Accessories
Catalog
Number
EGK
BK1
EWK2
Discount Schedule UNPB
20.00
20.00
13.00
7.00
3.00
3.00
9.00
9.00
8.00
8.00
21.00
57.00
67.00
MBKFD3
33.00
33.00
2.80
3.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
PANELBOARDS
QF3
EBF1
List
Price $
18.00
20.00
10
BK2
BK3
IMK1
11-1824-01
12-1110-01
11-1056-01
NBK03
NBK04
NBK05
NBK06
ECGK
IGK
ICGK
EWK1
Description
Al Ground Bus 44 Connections
Bonding kit for 250A max.
and all P1 panels
Bonding kit for S1/S2 400 & 600
Bonding kit
Interior Adjusting Kit
Directory Card Holder
Directory Card
NEMA Instruction Book
Number Strips 1–42
Number Strips 43–84
Number Strips 85–126
Number Strips 127–168
Cu Ground Bus 44 Connections
Insulated Al Ground Bus
Insulated Cu Ground Bus
End Wall Kit with Knockouts
(20" W x 5.75" DP)
End Wall Kit with Knockouts
(24" W x 7.75" DP)
Filler Plate
NEB/HEB Filler Plate
10-11
Panelboards
Panelboard Replacement, Modification, and Additions
Selection
S1/S2 Panels—All the P1 panel kits for 250 amp and below
panels will work for 250 amp maximum S1/S2 panels.
400/600 Amp S1/S2 and All SE Panels
Lug Kits — Main or Feed Thru
Ampere
Rating
Material
Wire Range
Service
125A / 250A
Al/Cu
(2) 1/0–250 kcmil
1-Phase MLKA1
208.00
125A / 250A
Al/Cu
(2) 1/0–250 kcmil
3-Phase MLKA3
262.00
Al/Cu
(2) #4–250 kcmil or
(1) 3/0–500 kcmil
1-Phase SMLKA1 791.00
Al/Cu
(2) #4–250 kcmil or
(1) 3/0–500 kcmil
3-Phase SMLKA3 879.00
400A / 600A
400A / 600A
Catalog
Number
List
Price $
Breaker Mounting Kits
Ampere
Rating Breaker Types
Catalog
Service Number
List
Price $
125A
ED2, ED4, ED6, HED4, HED6, HHED6 1-Phase SMBKED1
225A
ED2, ED4, ED6, HED4, HED6, HHED6 3-Phase SMBKED3 1273.00
670.00
225A
QJ2, HQJ2, HQJ2H 햲
225A
QJ2, HQJ2, HQJ2H 햲
3-Phase SMBKQJ3 2007.00
250A
FXD6, FD6, HFXD6, HFD6
1-Phase SMBKFD1
250A
FXD6, FD6, HFXD6, HFD6
3-Phase SMBKFD3 1128.00
400A
JD6, JXD6, HJD6, HJXD6
1-Phase SMBKJD1 2381.00
400A
JD6, JXD6, HJD6, HJXD6
3-Phase SMBKJD3 2755.00
600A
LD6, LXD6, HLD6, HLXD6
1-Phase SMBKLD1 2533.00
600A
LD6, LXD6, HLD6, HLXD6
3-Phase SMBKLD3 2854.00
1-Phase SMBKQJ1 1786.00
955.00
Neutral Kits
Ampere
Rating
Description
Catalog
Number
List
Price $
250A max.
30/42 circuit 200% neutral kit
2NLK2
464.00
400/600A max.
42 circuit 200% neutral kit
2NLK1
487.00
PANELBOARDS
10
Other applications:
For P4/S4 and 10" deep SPP panels see page 10-50 for branch breaker mounting kits.
For P5/S5 and 12.75" deep SPP panels see page 10-61 for branch breaker mounting kits.
For P4/F1 and 10" deep FPP panels see page 10-50 for branch fusible switch mounting kits.
For P5/F2 and 12.75" deep FPP panels see page 10-61 for branch fusible switch mounting kits.
For Series 5, Series 6, CDP6 and VB 6 panels as well as FC20, FCI, FCII, SB1, SB2 and SB3
distribution switchboards, see page 12-32 for branch device mounting kits.
햲
QJ mounting kit is for subfeed breakers only, not main breaker.
The kit contains mountings for (2) breakers.
10-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule UNPB
Sentron® Panelboards
Warehouse Stock/Unassembled
Selection
Main Breaker Mounting Kits w/Breakers for P1 panels
Catalog
Number
Description
Ratings
240V
480V
MBKED3100
Kit w/3-pole ED4 100A breaker
65KA
18KA
1869.00
MBKED3125
Kit w/3-pole ED4 125A breaker
65KA
18KA
3197.00
MBKQJ1125
Kit w/2-pole QJ2 125A breaker
10KA
—
1929.00
MBKQJ1150
Kit w/2-pole QJ2 150A breaker
10KA
—
1929.00
MBKQJ1175
Kit w/2-pole QJ2 175A breaker
10KA
—
1929.00
MBKQJ1200
Kit w/2-pole QJ2 200A breaker
10KA
—
1929.00
MBKQJ1225
Kit w/2-pole QJ2 225A breaker
10KA
—
1929.00
MBKQJ3125
Kit w/3-pole QJ2 125A breaker
10KA
—
2757.00
MBKQJ3150
Kit w/3-pole QJ2 150A breaker
10KA
—
2757.00
MBKQJ3175
Kit w/3-pole QJ2 175A breaker
10KA
—
2757.00
MBKQJ3200
Kit w/3-pole QJ2 200A breaker
10KA
—
2757.00
MBKQJ3225
Kit w/3-pole QJ2 225A breaker
10KA
—
2757.00
MBKQJ1125H
Kit w/2-pole QJ2H 125A breaker
42KA
—
2115.00
MBKQJ1150H
Kit w/2-pole QJ2H 150A breaker
42KA
—
2115.00
MBKQJ1175H
Kit w/2-pole QJ2H 175A breaker
42KA
—
2115.00
MBKQJ1200H
Kit w/2-pole QJ2H 200A breaker
42KA
—
2115.00
MBKQJ1225H
Kit w/2-pole QJ2H 225A breaker
42KA
—
2115.00
MBKQJ3125H
Kit w/3-pole QJ2H 125A breaker
42KA
—
3144.00
MBKQJ3150H
Kit w/3-pole QJ2H 150A breaker
42KA
—
3144.00
MBKQJ3175H
Kit w/3-pole QJ2H 175A breaker
42KA
—
3144.00
MBKQJ3200H
Kit w/3-pole QJ2H 200A breaker
42KA
—
3144.00
MBKQJ3225H
Kit w/3-pole QJ2H 225A breaker
42KA
—
3144.00
MBKFD3150
Kit w/3-pole FXD6 150A breaker
65KA
35KA
3301.00
MBKFD3175
Kit w/3-pole FXD6 175A breaker
65KA
35KA
3301.00
MBKFD3200
Kit w/3-pole FXD6 200A breaker
65KA
35KA
3301.00
MBKFD3225
Kit w/3-pole FXD6 225A breaker
65KA
35KA
3301.00
MBKFD3250
MBKJD1300
Kit w/3-pole FXD6 250A breaker
Kit w/2-pole JXD6 300A breaker
65KA
65KA
35KA
—
4612.00
4534.00
List
Price $
MBKJD3300
Kit w/3-pole JXD6 300A breaker
65KA
35KA
5974.00
MBKJD1400햲
Kit w/2-pole JXD6 400A breaker
65KA
35KA
4534.00
MBKJD3400햲
Kit w/3-pole JXD6 400A breaker
65KA
35KA
5974.00
Branch Breakers Selection for P1
Selection Guide
1. Select breaker type.
2. Select required amperage.
3. Select number of poles.
4. Select branch breaker
catalog numbers.
5. Select ground bar and filler
plates. (See replacement
parts & accessories on
Page 10-11.)
AFCI Arc Fault Circuit Interrupter
Interrupting Ratings (kA)
RMS Symmetrical Amperes
Volts AC
Breaker
Type
Ampere
Rating
Catalog
Number
120
120/240
240
BAF
1-Pole
15
20
B115AF
B120AF
10
10
—
—
—
—
BAFH
1-Pole
15
20
B115AFH
B120AFH
22
22
—
—
—
—
Switching Neutrals 햲
Interrupting Ratings (kA)
RMS Symmetrical Amperes
Volts AC
Breaker
Type
Ampere
Rating
Catalog
Number
120
120/240
240
BG
2-Wire
Common Trip
15
20
30
BG215 ■
BG220 ■
BG230 ■
10
10
10
—
—
—
—
—
—
BG
3-Wire
Common Trip
15
20
30
BG315 ■
BG320 ■
BG330 ■
—
—
—
10
10
10
—
—
—
10
PANELBOARDS
햲
400 Amp Kit used as Main only. And for top feed
applications only.
Discount Schedule UNPB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-13
Sentron® Panelboards
Warehouse Stock/Unassembled
Selection
Branch Breakers Selection for P1
Selection Guide
1. Select breaker type.
2. Select required amperage.
3. Select number of poles.
4. Select branch breaker catalog
numbers.
5. Select ground bar and filler
plates. (See replacement parts
& accessories on Page 10-11.)
BL Branch Breakers – 10,000A IR
BLH Branch Breakers – 22,000A IR
Amp
Rating
1-Pole
120/240V
2-Pole
120/240V
2-Pole
240V
3-Pole
240V
Amp
Rating
1-Pole
120/240V
2-Pole
120/240V
3-Pole
240V
15
20
25
30
35
40
45
50
55
60
70
80
90
100
110
125
B115
B120
B125
B130
B135
B140
B145
B150
B155
B160
B170
—
—
—
—
—
B215
B220
B225
B230
B235
B240
B245
B250
—
B260
B270
B280
B290
B2100
B2110
B2125
B215R
B220R
B225R
B230R
B235R
B240R
B245R
B250R
—
B260R
B270R
B280R
B290R
B2100R
—
—
B315
B320
B325
B330
B335
B340
B345
B350
—
B360
B370
B380
B390
B3100
—
—
15
20
25
30
40
50
55
60
70
80
90
100
B115H
B120H
B125H
B130H
B140H
B150H
B155H
B160H
B170H
—
—
—
B215H
B220H
B225H
B230H
B240H
B250H
—
B260H
B270H
B280H
B290H
B2100H
B315H
B320H
B325H
B330H
B340H
B350H
—
B360H
B370H
B380H
B390H
B3100H
HBL Branch Breakers – 65,000A IR
Amp
Rating
15
20
30
40
50
60
70
80
90
100
1-Pole
120/240V
2-Pole
120/240V
3-Pole
240V
B115HH
B120HH
B130HH
B140HH
B150HH
—
—
—
—
—
B215HH
B220HH
B230HH
B240HH
B250HH
B260HH
B270HH
B280HH
B290HH
B2100HH
B315HH
B320HH
B330HH
B340HH
B350HH
B360HH
B370HH
B380HH
B390HH
B3100HH
BQD Branch Breakers – 14,000A IR Max. @ 480/277 Vac /
65,000A IR max. @ 240 Vac
Amp
Rating
1-Pole
277V
2-Pole
480Y/277V
3-Pole
480Y/277V
15
20
25
30
35
40
45
50
60
70
80
90
100
BQD115
BQD120
BQD125
BQD130
BQD135
BQD140
BQD145
BQD150
BQD160
BQD170
BQD180
BQD190
BQD1100
BQD215
BQD220
BQD225
BQD230
BQD235
BQD240
BQD245
BQD250
BQD260
BQD270
BQD280
BQD290
BQD2100
BQD315
BQD320
BQD325
BQD330
BQD335
BQD340
BQD345
BQD350
BQD360
BQD370
BQD380
BQD390
BQD3100
GFCI Personnel Protection (5MA)
PANELBOARDS
10
Interrupting Ratings (kA)
RMS Symmetrical Amperes
Volts AC
Breaker
Type
Ampere
Rating
Catalog
Number
120
120/240
240
BLF
1-Pole
15
20
25
30
BF115
BF120
BF125 ■
BF130
10
10
10
10
—
—
—
—
—
—
—
—
BLF
2-Pole
15
20
30
40
50
60
BF215
BF220
BF230
BF240 ■
BF250 ■
BF260 ■
—
—
—
—
—
—
10
10
10
10
10
10
—
—
—
—
—
—
BLHF
1-Pole
15
20
30
BF115H
BF120H
BF130H ■
22
22
22
—
—
—
—
—
—
BLHF
2-Pole
15
20
30
40
50
60
BF215H ■
BF220H ■
BF230H ■
BF240H ■
BF250H ■
BF260H ■
—
—
—
—
—
—
22
22
22
22
22
22
—
—
—
—
—
—
■ Built to order. Allow 2–3 weeks for delivery.
햲 HACR rated.
10-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Factory Assembled
Selection
P 1 C 4 2 F X 2 5 0 A T S
Catalog Numbering System
Type of Panel
P1, P2, P3, P4, P5
Voltage and System
C = 208Y/120 3Ø 4 W Wye AC - All
E = 480Y/277 3Ø 4 W Wye AC - All
D = 240 3Ø 3 W Delta AC - All
F = 480 3Ø 3 W Delta AC - All
G = 600 3Ø 3 W Delta AC - P2, P3, P4, P5
I = 347 3Ø 3 W Delta AC P2, P3, P4, P5
B = 240/120 3Ø 4 W Delta BØ High Leg AC - All
Q = 240/120 3Ø 4 W Delta CØ High Leg AC - All
X = 120/240 2Ø 5 W Single Neutral AC - P2, P3, P4, P5
A = 120/240 1Ø 3 W Grounded Neutral AC (2) - All
H = 120 1Ø 2 W Grounded Neutral AC (2) - All
J = 240 1Ø 2 W No Neutral AC (3) - All
Y = 125 1Ø 2 W Grounded Neutral AC (2) - P2, P3, P4, P5
Z = 500 2W DC - P2, P3, P4, P5
K = 220/127 3Ø 4 W Wye AC - All
M = 380/220 3Ø 4 W Wye AC - All
R = 415/240 3Ø 4 W Wye AC - All
S = 440/250 3Ø 4 W Wye AC - All
L = 600/347 3Ø 4 W Wye AC - All
T = 230 3Ø 3 W Delta AC - All
Z = 380 3Ø 3 W Delta AC - P2, P3, P4, P5
1 = 24V DC 1-Pole Branches Only (3) - All
2 = 24V DC 2-Pole Branches Only (3) - All
3 = 48V DC 1-Pole Branches Only (3) - All
4 = 48V DC 2-Pole Branches Only (3) - All
5 = 125V DC 1-Pole Branches Only (3) - All
N = 125V DC 2-Pole Branches Only - All
O = 125/250V DC 2-Pole Branches Only - All
P = 125/250V DC 2 & 3-Pole Branches - All
U = 120V AC 3Ø3W - All
V = 240V 3Ø3W Grounded B Phase - All
Circuits
or
Enclosure Height
P1 – 18, 30, 42
P3 – 56, 62, 68, 74, 80
P2 – 18, 30, 42, 54
P4, P5 – 60, 75, 90
Main Lug (ML), Main Breaker
(See Main Breaker Table coding below), Main Switch (MS)
Amperage
100–400A = P1
250 – 800A = P3
100–600A = P2
400 –1200A = P4, P5
Bus Material
Temp rated Al.
750A/sq. in. Al.
Temp rated Cu.
Temp rated Cu.
Temp rated Cu.
1000A/sq. in. Cu.
1000A/sq. in. Cu.
Bus Plating
Tin-Plated
Tin-Plated
Tin-Plated
Silver-Plated
Tin-Plated
Tin-Plated
Silver-Plated
Letter
A
B
C
E
F
G
H
Bus
Code
P1
P2
P3
P4
P5
A
B
C
F
E
G
H
•
n/a
•
n/a
n/a
n/a
n/a
•
•
•
•
optional
•
optional
•
•
•
•
optional
•
optional
•
•
n/a
•
•
optional
•
•
•
n/a
•
•
optional
•
• Indicates default for this bus type.
Feed Location
T = Top
B = Bottom
Mounting
S = Surface
F = Flush. Flush trims extend 1 1/2" beyond the base box dimensions on P1, P2 and P3 and 2" on P4 and P5 panels.
Main Breaker Coding
Panel must not be a lighting and appliance panel. See
NEC article 384.
Standard
bussing in P1, P2 and P3 panels is tinplated for aluminum and copper. Standard bus is
temperature rated to the maximum amperage in
the panel.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-15
PANELBOARDS
10
(Breaker Type) Code
(BAF) BA, (BAFH) BF, (BQD) BQ, (NGB) NB, (BQD6) B6, (BL) BL, (BLEH) BE, (BLH) BH, (BLR) BR, (HBL) HB, (BGL-SWI) B1,
(BLE-GFCI) BG, (BLF-GFCI) BC, (CED6) CE, (ED4) E4, (ED6) E6, (HED4) H4, (HHED6) HA, (BLHF-GFCI) B4, (BL-HID) B2,
(HQP) HQ, (QP) QP, (QPH) PQ, (QJ2) QJ, (QJ2H) Q2, (QJH2) QH, (CFD6) CF, (FD6) FD, (FXD6) FX, (HFD6) HF, (HFXD6) H2,
(HHFD6) H1, (HHFXD6) H3, (CJD6) CJ, (HHJD6) 6H, (HHJXD6) H9, (HJD6) H6, (HJXD6) H5, (HJXD6H) H7, (HQJ2H) Q3,
(JD6) J6, (JXD2) JD, (JXD2H) J2, (JXD6) JX, (JXD6H) JH, (CLD6) CL (HHLD6) HH, (HHLXD6) XH, (HLD6) HL, (HLXD6) HO,
(HLXD6H) HP, (LD6) L6, (LXD6) LX, (LXD6H) HL, (HLMD6) HJ, (HLMXD6) HK, (LMD6) L1, (LMXD6) LM, (NMX) M1, (HMX) M2,
(LMX) M3, (NNX) N1, (HNX) N2, (LNX) N3, (NNY) N4, (HNY) N5, (LNY) N6, (CMD6H) CH, (HMD6) HM, (HMXD6) HR,
(HMXD6H) HS, (MD6) MD, (MXD6) MX, (MXD6H) MH, (CND6) CN, (CND6H) C6, (HND6) HN, (HNXD6) HT, (HNXD6H) HX,
(ND6) ND, (NXD6) NX, (NXD6H) NT
Panelboards
Circuit Breaker / Lighting and Distribution
Pricing
Types P1
Example No. 2 is a two section
panel, each having 42 circuits.
Section One will contain 1-225/3 QJ2
main breaker (top feed), 250A
feed-thru lugs and 21" of unit space.
Section Two will contain 250A main
lugs only (bottom feed) and 21" of
unit space. Sections will be 44"
in height.
1) To specify a particular panelboard;
list panel catalog number, branches,
modifications, and price on an
Estimate Sheet. Price includes interior
with provisions, box, ground bar, and
trim. See Example No. 1.
2) When more than 42 circuits are
specified for P1 a two section panel
will be required. Feed-thru lugs must
be priced in one section from the
modifications on pages 10-20.
Panel LPA
Panel LPB
1 — P1C30QJ225ATS
10–20/1
25. ea.
4–30/3
140. ea.
2540.
250.
560.
1 — P1C42QJ225ATS
1 — P1C42ML250ATS
1 — Feed-Thru Lugs
3350.
3) Standard main breakers are indicated
by the 6th and 7th positions in the
catalog number. If any other main
breaker type is required, replace with
the appropriate code from page 10-18.
See Example No. 3.
4) All panel modifications must be listed
and priced separately.
5) If the boxes are to be sized the same
then each panel must have the same
amount of unit space.
Panel LPC
2760.
1330.
190.
4280.
1 — P1C42HF250CTS
HFD6 Main
42–20/1 BLH 35. ea.
Cu Bus
Type 3R
3160.
1900.
1470.
255.
860.
7645.
Example No. 1
Example No. 2
Example No. 3
Type P2
Boxes will be sized the same for two
section panels.
Base price includes all provisions.
Subfeed or feed-thru lugs as
required must be priced from
page 10-28.
Example No. 4 is a two section
panel, each having 42 circuits.
Section One will contain 1-400/3
JXD6 main breaker (top feed), 225A
feed-thru lugs, and 21" of unit space.
Section Two will contain 400A main
Type P2 panelboards are priced the
same as Type P1 described above except
for two section panels.
1) When more than 42 circuits are
specified for P2, a two section panel
will be assumed. Main breaker codes
in the 5th and 6th positions will
dictate the use of feed-thru lugs.
An “ML” in the fifth and sixth
positions will dictate the use of
subfeed lugs for 125A and 250A and
feed-thru lugs for 400A and 600A.
PANELBOARDS
10
Types P3, P4 and P5
1) To specify a particular panelboard,
first determine voltage, system,
amperage and type of main,
amperage and type of branch
devices, and modifications if any.
(Step 1)
2) List branch devices and
modifications requiring space
additions. List unit space
requirements of each.
Note: Some units are twin mounted
meaning two breakers occupy the
same unit space.
Step #1
Step #2
Amperage
Voltage
System
Main
Branches
Modification
Feed
Mounting
400
208Y/120
3-phase 4-wire
Main Breaker
5-125/3, 2-225/3,
1-250/3
None
Top
Surface
Unit Space Calculation
5-125/3 QJ2
5-225/3 QJ2
1-250/3 FXD6
5" = 15"
5" = 5"
5" = 5"
25"
Enclosure is B275 from Selection
Chart on page 10-41.
(32" wide, 75" high, 10" deep).
For inches / millimeters conversion, see Application Data section.
10-16
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
lugs only (bottom feed) and 21" of
unit space. Sections will be 53"
in height.
Select appropriate enclosure height
from selection chart on pages 10-34,
10-44, or 10-56, based on unit space
requirements. (Step 2)
3) Select panelboard catalog number
from appropriate table based upon
voltage, system, amperage and unit
space requirements. (Step 3)
Step #3
1—P4C75JX400ATS
5-125/3 QJ2
940.
2-225/3 QJ2
940.
1-250/3 FXD6 2700.
$04210.
4700.
1880.
2700.
13490.
Panelboards
Circuit Breaker / Lighting and Distribution
Type P1
480Y/277 Vac Maximum
600Y/ 347 Vac (CSA only) Maximum
400 Ampere Mains
400 Ampere Maximum Branch
UL Short Circuit Rating —
200,000 A. @ 240 Vac / 100,000 A. @
480/277 Vac. IR Maximum
Branch Breaker Symmetrical
Interrupting Capacity
Based on Underwriters’ Test Procedure
Feed thru and subfeed lugs may result in
lower interrupting ratings if not protected
by a main device. Consult sales office.
Meets 2005 NEC wire bending
requirement, section 312.6.
Meet Federal Specification W-P-115C.
Panelboards
Listed by Underwriters’ Laboratories,
Inc., under ”Panelboards” File #E2269
for interiors and #E4016 for boxes
and fronts.
Service
1-phase 2-wire - 120 Vac, 240 Vac,
24 Vdc, 48 Vdc, 125 Vdc
1-phase 3-wire - 120/240 Vac, 125/250
Vdc
3-phase 3-wire - 480Y/277 (when derived
from 3-phase 4-wire system), 240 Vac,
120 Vac, 125/250 Vdc
3-phase 4-wire - 208Y/120 Vac,
240/120 Vac, 480Y/277 Vac,
600Y/347 Vac, 380/220 Vac.
Panelboard Fronts and Doors
Standard panelboards are furnished
with trim featuring concealed fasteners
and hinges with a flush door lock.
All are factory-assembled for ease of
installation. Fronts are fabricated from
code gauge steel and finished ANSI-61.
See page 10-71 for optional fronts.
Main Breakers
BL, BLH, HBL, BQD, ED4, ED6, HED4,
HHED6, QJ2, QJH2, QJ2-H, FXD6, FD6,
HFD6, HFXD6, JXD6, JD6, HJXD6,
HJD6. (All main breakers except 400
amp frame are mounted horizontal.)
General
Side Gutter Wiring Space (inches)
Main Breaker Panel Connectors
Ampere
Rating
Connectors Suitable for Cu or Al
100
(1)—#14 1/0 AWG
125
(1)—#4 1/0 AWG
225
(1)—#4 AWG–300 kcmil
250
(1)—#4/0 AWG–350 kcmil Al
(1)—#6/0 AWG–350 kcmil Cu
400
(2)—#3/0 AWG–250 kcmil Al or
(1)—#3/0 AWG–500 kcmil Al
Connector ranges indicated do not apply
to all main breaker types. Refer to molded
case circuit breaker standard pressure
wire connector chart (Section 6) for the
connector range of a specific frame.
Reference
Letter
A
6.375
7.375
B
5.500
7.500
C
6.125
8.125
D
6.500
8.500
E
5.250
7.250
F
5.000
7.000
Branch Breaker Side Gutters
A
B
C
D
E
F
Main Lug Connectors
125
(1)—#6 AWG–350 kcmil
250
(1)—#6 AWG–350 kcmil
400
(2)—#3/0 AWG–250 kcmil or
(1)—#3/0 AWG–600 kcmil
Boxes
20" wide, 5.75" deep
▪ End walls are blank as standard.
End walls with knockouts will be
supplied at no charge on 5.75" deep
panels if requested at time of order.
Main Breaker Gutter Dimensions
(inches)
Side
Gutter
Main
Breaker
Neutral
Location
20"
24"
w/box w/box
20"
w/box
BL, BLH, HBL, BQD
8.500 10.500
11.500
NGB
8.000 10.000
11.500
ED4, ED6, HED4
6.125
8.125
11.500
QJ2, QJH2, QJ2-H
6.500
8.500
11.500
FD6, FXD6, HFD6
5.250
7.250
11.500
15.000 15.000
26.750
JD6, JXD6
Main Lug End Gutter Dimensions
(inches)
Amp
Rating
End
Gutter
Neutral
Location
125
10.500
11.500
250
10.500
11.500
400
25.500
26.750
Panel
Width 24"
(Optional)
Panel
Width 20"
BL, BLH, HBL
BL, BLH, HBL
BLF, BLHF
BLF, BLHF
BQD
BQD
ED, ED4, ED6, HED4, HHED6
QJ2, QJH2, QJ2-H
FXD6, FD6, HFD6
NGB
NGB
A
B
F
Weight — Approximate
Total panelboard weight when filled with
a normal quantity of breakers and
accessories is:
▪ About 3 lbs. per inch of box height
Gauge Steel Boxes
Width
Height
Gauge Steel
20"
All
#16
Fronts — Surface, Flush
20"
All
#14
10
Series Connected Short Circuit Ratings
The term “Series Connected Short
Circuit Rating” refers to the application
of series connected circuit breakers in a
combination that allows some breakers
to have lower individual interrupting
ratings than the available fault current.
This is permitted as long as the series
combination has been tested and
certified by UL.
The table below lists specific main
and branch breaker series combinations
that are marked on all P1 panels.
All combinations shown have been
tested for use in P1 panelboards and
are UL listed. Other combinations are
available. See Circuit Breaker Section,
of this book.
These series ratings must be specified
on order at time of entry.
PANELBOARDS
Feed-thru lug and neutral wire bending space is 15.000"
P1 400 amp main breaker panels have wire bending
space available for 600 kcmil.
and 16.250" respectively on 400A panel.
400A main breaker is vertical mounted.
P1 panel limited to (1) subfeed 250 amperes max.
For inches / millimeters conversion, see Application Data section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-17
Panelboards
Circuit Breaker / Lighting and Distribution
Selection
Type P1
Shown with Standard Mains, Top Fed
and Surface Trim
Catalog number is for aluminum main
bus. For optional copper main bus
change “A” in position 11 to “C”.
See copper price adder on page 10-20.
Main Lugs Only
Panels are top feed, surface mounted.
For bottom feed, change “T” in position
12 to “B”. For flush mounting,
change “S” in position 13 to “F”.
Replace fifth and sixth position
in panelboard catalog number,
with alternate main breaker code.
Use price adders from main breaker
selection table. Horizontally mounted.
Maximum
Panel
Ampere Rating
Maximum
1-Pole
Circuits
Box
Height
(inches)
208Y/120V
3-Phase, 4-Wire
Catalog Number
List
Price $
120/240V
1-Phase, 3-Wire
Catalog Number
List
Price $
480Y/277V
3-Phase, 4-Wire
Catalog Number
List
Price $
125
18
30
42
32
38
44
P1C18ML125ATS
P1C30ML125ATS
P1C42ML125ATS
840.00
1060.00
1250.00
P1A18ML125ATS
P1A30ML125ATS
P1A42ML125ATS
750.00
980.00
1180.00
P1E18ML125ATS
P1E30ML125ATS
P1E42ML125ATS
910.00
1190.00
1440.00
250
18
30
42
32
38
44
P1C18ML250ATS
P1C30ML250ATS
P1C42ML250ATS
910.00
1100.00
1330.00
P1A18ML250ATS
P1A30ML250ATS
P1A42ML250ATS
820.00
1010.00
1230.00
P1E18ML250ATS
P1E30ML250ATS
P1E42ML250ATS
1020.00
1270.00
1540.00
400
18
30
42
56
62
68
P1C18ML400ATS
P1C30ML400ATS
P1C42ML400ATS
1240.00
1440.00
1710.00
P1A18ML400ATS
P1A30ML400ATS
P1A42ML400ATS
1110.00
1340.00
1580.00
P1E18ML400ATS
P1E30ML400ATS
P1E42ML400ATS
1240.00
1440.00
1710.00
Main Circuit Breaker
100
18
30
42
32
38
44
P1C18BL100ATS
P1C30BL100ATS
P1C42BL100ATS
1170.00
1370.00
1640.00
P1A18BL100ATS
P1A30BL100ATS
P1A42BL100ATS
1060.00
1250.00
1450.00
P1E18BD100ATS
P1E30BD100ATS
P1E42BD100ATS
1520.00
1740.00
2230.00
125
18
30
42
32
38
44
P1C18NB125ATS
P1C30NB125ATS
P1C42NB125ATS
1710.00
1920.00
2190.00
P1A18NB125ATS
P1A30NB125ATS
P1A42NB125ATS
1600.00
1790.00
2010.00
P1E18NB125ATS
P1E30NB125ATS
P1E42NB125ATS
1710.00
1920.00
2190.00
225
18
30
42
32
38
44
P1C18QJ225ATS
P1C30QJ225ATS
P1C42QJ225ATS
2350.00
2540.00
2760.00
P1A18QJ225ATS
P1A30QJ225ATS
P1A42QJ225ATS
1950.00
2150.00
2360.00
P1E18FX225ATS
P1E30FX225ATS
P1E42FX225ATS
2510.00
2780.00
3030.00
250
18
30
42
32
38
44
P1C18FX250ATS
P1C30FX250ATS
P1C42FX250ATS
2760.00
2950.00
3160.00
P1A18FX250ATS
P1A30FX250ATS
P1A42FX250ATS
2360.00
2550.00
2770.00
P1E18FX250ATS
P1E30FX250ATS
P1E42FX250ATS
2760.00
2950.00
3160.00
400
18
30
42
56
62
68
P1C18JX400ATS
P1C30JX400ATS
P1C42JX400ATS
3160.00
3370.00
4540.00
P1A18JX400ATS
P1A30JX400ATS
P1A42JX400ATS
2650.00
2850.00
3160.00
P1E18JX400ATS
P1E30JX400ATS
P1E42JX400ATS
3990.00
4190.00
4540.00
Main Breaker Selection (Cost adder for other than std.)
PANELBOARDS
10
Ampere Breaker Maximum Interrupting Rating Catalog
Rating Type
240 Vac
480/277 Vac Number
List
Price $
Available Trip Values
100
BL
BLH
HBL
BQD
125
NGB
ED4
HED4
HHED6
100
65
100
100
25
18
42
65
NB
E4
H4
HA
STD
55.
540.
540.
15,
15,
15,
15,
20,
20,
20,
20,
25,
25,
25,
25,
30,
30,
30,
30,
35,
35,
35,
35,
10
22
42
100
—
—
—
—
35
35
65
65
100
QJ
QH
Q2
HQ
FD
FX
HF
H2
H1
STD @ 240 Vac
75.
160.
1360.
140.
140.
1760.
1760.
2120.
60,
60,
60,
60,
70,
70,
70,
70,
80,
80,
80,
80,
90,
90,
90,
90,
100,
100,
100,
100,
225
QJ2
QJH2
QJ2-H
HQJ2H
FD6
FXD6
HFD6
HFXD6
HHFD6
FD
FX
HF
H2
H1
STD
STD
1900.
1900.
2120.
J6
JX
H6
H5
STD
STD
2270.
2270.
250
FD6
FXD6
HFD6
HFXD6
HHFD6
400
JD6
JXD6
HJD6
HJXD6
10
22
65
65
—
—
—
14
BL
BH
HB
BQ
STD @ 240 Vac
65.
400.
400. @ 240 Vac / STD @ 480/277 Vac
15,
15,
15,
15,
20,
20,
20,
20,
30,
30,
30,
30,
35,
35,
35,
35,
40,
40,
40,
40,
45,
45,
45,
45,
50,
50,
50,
50,
60,
60,
60,
60,
70,
70,
70,
70,
80,
80,
80,
80,
90,
90,
90,
90,
100
100
100
100
40,
40,
40,
40,
50,
50,
50,
50,
60,
60,
60,
60,
70,
70,
70,
70,
80,
80,
80,
80,
90,
90,
90,
90,
100,
100,
100,
100,
65
100
200
65
100
35
65
200
100
65
100
35
65
For inches / millimeters conversion, see Application Data
section.
10-18
110,
110,
110,
110,
125,
125,
125,
125,
150,
150,
150,
150,
175,
175,
175,
175,
200,
200,
200,
200,
110,
110,
110,
110,
125
125
125
125
225
225
225
225
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
70, 80, 90, 100, 110, 125, 150, 175, 225
250
250
250
200, 225, 250, 300, 350, 400
200, 225, 250, 300, 350, 400
Note: Price branch devices from page 10-19.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Circuit Breaker / Lighting and Distribution
Selection
Type P1
Branch Breaker Selection
Breaker
Type
BL (120V)
Available
Ampere
Rating
15, 20, 25, 30, 35, 40, 45, 50, 60
70
80, 90, 100
1-Pole
25.
35.
—
Maximum Interrupting
Rating (kA)
2-Pole
3-Pole
Provisions
for
Future $
120V
120/240V
240V
277V
480/277V
45.
85.
140.
140.
190.
210.
—
—
—
10
10
—
—
—
List Price $ Installed
BL (HID)
15, 20, 30
40.
70.
—
—
—
—
—
—
—
BLH (120V)
15, 20, 25, 30, 35, 40, 45, 50, 55, 60
70
80, 90, 100
35.
75.
—
85.
130.
200.
220.
300.
310.
—
—
—
22
22
—
—
—
HBL
15, 20, 30, 40, 50
60, 70, 80, 90, 100
65.
—
150.
400.
290.
480.
—
—
65
65
BLF (GFCI)
15, 20, 30
40, 50, 60
140.
—
240.
250.
—
—
—
—
10
—
—
—
—
BLE (EQGFI)
15, 20, 30
220.
330.
—
—
10
—
—
—
—
BLEH
15, 20, 30
40, 50, 60 (2-Pole Only)
420.
—
530.
530.
—
—
22
22
—
—
—
BGL (SWN)
15, 20, 30
15, 20, 30
—
—
100.
—
—
120.
—
—
10
10
—
—
—
BAF
15, 20
160.
330.
—
—
10
—
—
—
—
BAFH
15, 20
180.
340.
—
—
22
—
—
—
—
BLR (240V)
15, 20, 25, 30, 35, 40, 45, 50, 55, 60
70, 80, 90, 100
—
—
110.
190.
—
—
—
—
10
10
—
—
BLHF (GFCI)
15, 20, 30
40, 50, 60
160.
—
280.
300.
—
—
—
—
22
22
—
—
BQD
15, 20, 30, 40, 50, 60
70, 80, 90, 100
85.
200.
270.
400.
380.
490.
—
—
65
65
65
14
14
15, 20, 30, 40, 50, 60
70, 80, 90, 100,
110, 125
130.
210.
—
360.
420.
710.
480.
540.
910.
—
—
—
100
100
100
25
25
NGB
65
10
—
Subfeed Breakers — Limit One Per Panel
Maximum Interrupting
Rating (kA)
3-Pole
Provisions
for
Future $
120V
120/240V
670.
1120.
120.
120.
—
—
—
—
65
65
690.
1260.
770.
1460.
120.
120.
—
—
—
—
100
100
—
—
1270.
1270.
1400.
1400.
120.
120.
—
—
—
—
100
100
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
—
420.
880.
170.
—
—
10
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
—
930.
1140.
170.
—
—
22
QJ2H
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
—
1080.
1410.
170.
—
—
42
HQJ2H
FXD6
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
—
—
1940.
170.
—
—
100
70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250
—
1220.
1540.
220.
—
—
65
HFD6
70, 80, 90, 100, 125, 150, 175, 200, 225, 250
—
2440.
2550.
220.
—
—
100
Available
Ampere
Rating
List Price $ Installed
ED4
15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100
110, 125
—
—
520.
880.
HED4
15, 20, 30, 40, 50, 60, 70, 80, 90, 100
110, 125
—
—
HHED6
15, 20, 30, 40, 50, 60, 70
80, 90, 100, 110
QJ2
QJH2
Breaker
Type
1-Pole
2-Pole
240V
Note: BGL Breaker — 1-pole takes 2" unit space or 2-poles
— 2-pole takes 3" unit space or 3-poles
Note: 1-pole HBL limited to 50 amps
10
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-19
Panelboards
Type 1 P1 Panelboard Modifications and Additions
Enclosures
List
Price $
Description
6" end gutter . . . . . . . . . . . . . . . . . . . . .
2" side gutter . . . . . . . . . . . . . . . . . . . . .
Barrier in gutter (add to extra
gutter price) . . . . . . . . . . . . . . . . . . . .
24" wide . . . . . . . . . . . . . . . . . . . . . . . . .
235.
200.
Hinged trims . . . . . . . . . . . . . . . . . . . . .
Piano hinged trims . . . . . . . . . . . . . . . .
Door-in-door trims . . . . . . . . . . . . . . . .
Screw to the box trims . . . . . . . . . . . . .
160.
360.
360.
160.
200.
235.
Trim mounted devices . . . . . . . See page 10–72
• Pilot lights
• Toggle switches
• Push buttons
(Devices mounted to be wired to the trim
should also have hinged trim specified)
Painted boxes . . . . . . . . . . . .
See page 10–72
Custom colors . . . . . . . . . . . See painted boxes
Increase gauge trims
and boxes . . . . . . . . . . . . .
See page 10–72
Stainless steel trims
and boxes, Type 1 . . . . . .
See page 10–72
Aluminum trims
and boxes, Type 1 . . . . . .
See page 10–72
Meters
(Contact sales for pricing and application
engineering for space requirements)
Panel Skirts
See page 10-73
Special Locks
TEY . . . . . . . . . . . . . . . . . . . . . . . . . . .
TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . .
Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . .
LL803 . . . . . . . . . . . . . . . . . . . . . . . . .
LL806 . . . . . . . . . . . . . . . . . . . . . . . . .
Yale 47 (NYC) . . . . . . . . . . . . . . . . . . .
235.
255.
235.
235.
235.
425.
Panel Modifications
Main Bus
Catalog Amp Ratings
Number* 125A
250A
400A
Copper (tin pltd.)
C
390.
255.
255.
* “C” represents “A” in the 11th digit of
the catalog number.
Branch and Main Breaker and
Accessories
Bus mounted TVSS . . . . . see section 9
Service Entrance Label
Type P1 Panelboards are factory labeled
suitable for use as service entrance
equipment when NEC requirements are met.
A panelboard cannot have more than six
main disconnects, unless it is a lighting and
appliance branch panelboard. Lighting and
appliance branch panelboards are limited to
two main disconnects.
Grounding of Panelboards
Ground Bars except for brazed to box are
shipped with the panel interior factory
mounted.
• Non-Insulated Equipment Ground Bar – STD
• Copper Non-Insulated Ground Bar . . . . . . 40.
• Al Insulated Equipment Ground Bar. . . . . 40.
• Cu Insulated Equipment Ground Bar . . . . 75.
• Ground Bar Brazed to Box . . . . . . . . . . . 245.
(recommended for painted boxes)
Shunt Trip on Main or Branch
BL, BLH, HBL, BQD as branch only. BL,
BLH, HBL uses 1" unit space for shunt
trip as a branch device. All others may
be used on mains or subfeeds. See
breaker section for list price adders.
QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,
HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,
HJXD6
Application for Remote Switch
Switch Type
920
911
LEN
Modification
Mounts in 23" relay cabinet as
a main only
≤ 150 AMPS mounts in 23"
relay cabinet as a main only
>150 AMPS not available
30A mounts in 23" relay
cabinet as a main only
Feed-Thru Lugs
Cannot be used in conduction with
TVSS or subfeed breakers
Ampere List
Rating Price $ Type
Al/Cu Lay-in
190.
Mechanical
Cu Lay-in
250
370.
Mechanical
Al/Cu
285.
Compression
Al/Cu
490. AWG Mechanical
400
775.
Cu
585.
Al/Cu
Compression
Connector
Range
(1)—#6 AWG350 kcmil
(1)—#6 AWG350 kcmil
(1)—#6 AWG350 kcmil
(2)—#3/0 AWG250 kcmil or
(1)—#3/0 AWG600 kcmil
(2)—#3/0 AWG250 kcmil or
(1)—#3/0 AWG600 kcmil
(1) 400—600
kcmil
Note: Specify copper or aluminum cable.
Remote Control Switches
480V AC max. mounted in a 23"
enclosure to be cable connected to the
panel.
Time Clocks
Time clocks may be mounted in a 23"
enclosure to be cable connected to the
panel. Sangamo, Tork or Paragon time
clock can be supplied.
Description
Time Clock (1 or 2-pole, single
or double throw contacts; 3-pole,
single throw) 277V maximum with
plain dial
Astronomical dial
An omitting device
Reserve power or carryover
Space and mounting
provisions only
List
Price $
1070.
210.
75.
2450.
540.
Remote Switches Modifications
(See page 10-71)
PANELBOARDS
10
See breaker section for pricing on the following
options
• Handle blocks
• Handle locks
• Aux. Contacts햲
• UVR햲
Selection
햲
Accessories on 1" pole breakers (BL, BQD, ED) will take
unit space.
10-20
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P1 Panelboard Connector Modifications
Selection
Compression Lugs
Style
Amp
Rating
125
MLO
250
400
Compression
Connectors
Box Height
Addition
N/A
(1) #4 AWG - 350 kcmil
None
105.
105.
105.
105.
N/A
(1) 250-600 kcmil or
None
150.
150.
150.
150.
(1) #12-1/0 AWG
Box must go to 24" wide
115.
85.
85.
85.
(2) #3/0 AWG - 250 kcmil
125
Main
Breaker
List Price Adder $
3-Phase/ 3-Phase/ 1-Phase/ 1-Phase/
4-Wire
3-Wire
3-Wire
2-Wire
Breaker
Type
ED4, ED6, HED4
HHED6, CED6
225
QJ2, QJH2, QJ2H
(1) #6 AWG - 350 kcmil Cu or AI
Box must go to 24" wide for all breakers
225.
180.
180.
180.
250
FXD6, HFD6, CFD6 (1) #6 AWG - 350 kcmil Cu or AI
Box must go to 24" wide for all breakers
225.
180.
180.
180.
NOTE: Standard compression lugs used for P1 panels are range taking lugs and may require a particular crimping tool to accommodate the range. Consult factory for information. 200%
neutral not available with compression lugs.
Enclosure Modifications
List Price Adder $
Description
NEMA 3R enclosure s
NEMA 3R/12 enclosure s
Gasket between trim
and box (Type 1)
Panel
Width
20"
Panel
Width
24"
860.
1175.
680.
1180.
1180.
900.
NEMA-4—Water Tight, Dust Tight,
Steel Enclosure (consult plant for
actual enclosure size)
Box Height
(inches)
Enclosure Size
H
W
D
List Price
Adder $
32
38
44
56
62
68
32
38
44
56
62
68
5.75
5.75
5.75
5.75
5.75
5.75
4230.
5330.
6605.
16260.
17500.
19025.
20
20
20
20
20
20
Additional Enclosure Modifications
Description
Strip Heaters
List Price $
895.
Humidstat Control
1570.
Thermostat Control
1570.
NEMA-4X—Water Tight, Dust Tight and Corrosion Resistant
(consult plant for actual enclosure size)
Box Height
(inches)
32
38
44
56
62
68
Enclosure - Stainless Steel
& Steel with Epoxy Coating
H
W
D
32
20
5.75
38
20
5.75
44
20
5.75
56
20
5.75
62
20
5.75
68
20
5.75
Enclosure - Fiberglass
Size (inches)
H
D
W
36
24
8
48
36
12
48
36
12
60
36
12
66
36
12
72
36
12
List
Price $
10145.
12085.
15805.
20265.
23710.
27435.
10
Remote Switches Modifications (See page 10-71)
Switch Type
920
911
LEN
PANELBOARDS
Application for Remote Switch
Modification
Mounts in 23" relay cabinet as a main only
≤ 150 AMPS mounts in 23" relay cabinet as a main only
>150 AMPS not available
30A mounts in 23" relay cabinet as a main only
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-21
Panelboards
Type P1
Dimensions
Type 1 Box
Box is symmetrical
Box To Wall
Mounting Holes
2 in.
[ 51 ]
.31 in.
[8]
4.63 in.
[ 118 ]
Mounting
Dimple
Interior To Box
Mounting
Stubs
햲
32 in., 38 in., 44 in.
[ 813 ] [ 965 ] [ 1118 ]
56 in., 62 in., 68 in.
[ 1422 ] [ 1574 ] [ 1727 ]
4.63 in.
[ 118 ]
12.63 in.
[ 321 ]
15 in.
[ 381 ]
5.75 in.
[ 146 ]
2 in.
[ 51 ]
햲
20 in.
[ 508 ]
햲
Type 3R and 3R/12 Box
7.5 in.
[ 191 ]
.50 in.
[ 13 ]
2 in.
[ 51 ]
Mounting
Bracket
32 in., 38 in., 44 in.
[ 813 ] [ 965 ] [ 1118 ]
햲
56 in., 62 in., 68 in.
[ 1422 ] [ 1574 ] [ 1727 ]
2 in.
[ 51 ]
2 in.
[ 51 ]
20 in. 햲
[ 508 ]
1 in.
[25]
10
21.5 in.
[ 546 ]
5.75 in.
[ 146 ]
햲
PANELBOARDS
23.5 in.
[ 597 ]
햲 Dimensions
are interior of the box. Add 5/8" to width for absolute dimension.
Add 1/8" to height for absolute dimension.
Dimensions shown in inches and millimeters [ ].
10-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Type P2 Panelboards
Features
Flexibility is the hallmark of the P2 panel.
This panel offers a wide array of factoryassembled options to meet almost all
lighting panel applications. With this
design, the ability to mix breaker frames
in unit space up to 250 amps will also
meet many distribution panel requirements
in a much smaller package. Bussing
options for the P2 vary from the typical
temperature rated to 750 A/Si aluminum
to 1000A/Si copper. Standard bussing in
the P2 panel is tin-plated. Silver-plated
copper is also offered as an option.
Integrated time clocks, bus mounted
contactors, as mains or sub mains, split
bus, and subfeed lugs (up to 400 amp)
are just a few of the options of this
unique panel.
Like a lighting panel, P2 is set up around
18, 30, 42, and 54 circuit configurations.
It will also allow the user to configure
the panel to the smallest possible size.
The P2 panel starts with 9" of unit space
(18 circuits of 1" pole breakers). Breakers
mounted in unit space can be mixed and
matched to meet customer requirements.
All 1" pole breakers (BL, BQD, ED frames)
are mounted in 3" or 6" pole increments.
Breaker frames, above 125 amps, are
mounted in 6" single breaker mountings.
General
As an example of a minimum panel, (6)
20 amp 1-pole BL breakers (3" of unit
space) and a 3-pole 225 amp QJ breaker
(6" of unit space) equaling 9" of unit
space can be configured in a P2 panel
without any extra provisions or space
required. FD 250 amp and JD 400 amp
breakers are mounted as subfeed
breakers outside of unit space.
Another unique feature of the P2 panel is
that blank unit space can be added to
allow for future expansions or
modifications. Any expansions or
modifications must be in 3" increments.
BL, BQD, and ED frame breakers have 3"
or 6" pole kits, and can be mixed in unit
space by these increments. Breakers of
the same frame can cross from one
mounting to another if contiguous. QJ
frame breakers are mounted in 6"
increments for two- and three pole, single
mounted units. Changes in the unit space
length for BL, BQD, or ED frame breakers
require an addition deadfront, center strip
kit. Check with sales or the factory for
additional unit space kits.
Main Lug / Main Breaker
Enclosure – Standard Type 1 enclosure
is 20" wide x 5.75" deep X. Box Height is
determined by main device and unit
space. See charts for box height.
Voltage – 600V AC max.
250V DC max.
Amperage – 600 amp max.
Short circuit rating – 200 KAIC max.
symmetrical or equal to the lowest rated
device installed unless a series rating
is indicated. Panels with subfeed or
feed-thru lugs without a main device,
circuit breaker or fusible unit, are limited
to a three-cycle rating. The three-cycle
rating for the P2 panel is limited to 22
KAIC. Note that the main device may
be mounted remote from the panel.
Bussing – The P2 panel has more
options to meet market requirements.
The standard bussing is temperature
rated aluminum. The rating is per the
requirements of UL 67 – the standard for
panelboards. All aluminum bussing is
tin-plated. Optional bussing for the P2
panel is: 750 A/Si aluminum, temperature
rated copper, and 1000 A/Si copper.
The copper bus option for this panel is
tin-plated.
Weight – Approximate
Total panelboard weight when filled
with a normal quantity of breakers and
accessories is about 3 lbs. (1 kg) per
inch (54g per mm) of box height.
Gauge Steel of Boxes Fronts, Surface and Flush
Dimensions in inches (mm)
Width
Height
Gauge Steel
Box
Front
20 (508)
26–74 (660–1880)
#16
#14
10
PANELBOARDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-23
Panelboards
Type P2 Panelboards
Selection/Dimensions
Panel Unit Space To Box Height Requirements (See wire bending space diagrams below for ”A” and ”B” dimension references)
P2 Panels With Standard Line Lugs. Unit Space (starting with 9" and adding 6" increments) “A” Dimension
“B”
Dimension
Box
Height
26
32
38
44
50
56
62
68
74
Main Lugs
Main Breakers
125A
250A
400A
600A
125A
Horiz.
BL, BQD, ED
125A
Horiz.
CED
125A
Vert.
ED
225A
Horiz.
QJ
250A
Horiz.
FD
250A
Vert.
CFD
400A
JD
400A
CJD
600A
LD
600A
CLD
9
15
21
27
33
39
45
51
57
—
9
15
21
27
33
39
45
51
—
—
9
15
21
27
33
39
45
—
—
9
15
21
27
33
39
45
9
15
21
27
33
39
45
51
57
—
9
15
21
27
33
39
45
51
—
9
15
21
27
33
39
45
51
—
9
15
21
27
33
39
45
51
—
—
9
15
21
27
33
39
45
—
—
—
—
9
15
21
27
33
—
—
—
—
9
15
21
27
33
—
—
—
—
—
—
9
15
21
—
—
—
—
—
9
15
21
27
—
—
—
—
—
—
9
15
21
Main Breaker
Panel Amps
100
125
225
250
400
600
Main Lug Connectors
Breaker Frames
C
D
Panel Amps
Standard Connectors
C
D
BL
BQD
NGB
ED
QJ
FD
JD
LD
5.75
5.125
4.625
4.00
5.00
5.00
14.00
15.50
8.00
8.00
8.00
8.00
7.00
7.00
25.00
23.00
125
250
(1) #14 - 2/0
(1) #6 AWG - 350 kcmil
(1) #4 AWG - 600 kcmil
or (2) #6 - 250 kcmil
(2) #4 AWG - 500 kcmil
6.62
12.34
8.19
11.22
14.00
13.09
14.00
11.00
Main breaker wire bending
space diagram
400
600
Main lug wire bending
space diagram
Branch Breaker Side Gutters
Inches (mm)
Reference
Letter
A
B
C
D햲
E
햲
Panel Width 20" (508)
5.750 (146)
5.125 (130)
4.000 (102)
5.000 (127)
4.625 (117)
Single branch mounting construction.
Branch breaker wire bending
space diagram
A
B
C
D
Box depth = 5.75 in. (146 mm)
Box width – 20 in. (508 mm)
for 100-600A
Box depth = 5.75 in. (146 mm)
Box width – 20 in. (508 mm)
for 100-600A
E
BL, BLH, HBL BL, BLH, HBL
BLF, BLFH
BLF, BLFH
BQD, BQD6
BQD, BQD6
ED, ED4, ED6
ED, ED4, ED6
HED4, HHED6 HED4, HHED6
QJ2, QJH2, QJ2-H, HQJ2H
(Single Mounted)
NGB
NGB
Panel Width
20 in. (508 mm)
PANELBOARDS
10
Branch Breaker Side Gutters
10-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
A
B
C
E
Panelboards
Type P2 Panelboards
Selection
Main Breaker Selection
Ampere
Rating
Breaker
Type
100
BL
HBL
BQD
BLH
ED4
NGB
ED6
HED4
HHED6
CED6
125
Maximum Interrupting
Rating (kA)
List Price Adder $
480V
600V
480V
600V
Available Trip Values
10
65
65
22
65
100
100
100
100
200
—
—
14
—
18
25
25
42
65
200
—
—
—
—
—
—
14
—
18
100
BL
HB
BQ
BH
E4
NB
E6
H4
HA
CE
STD
400.
400.
65.
330.
250.
360.
540.
540.
1960.
—
—
STD (480/277)
—
330.
55.
360.
540.
540.
1960.
—
—
—
—
—
—
STD
—
540.
1960.
15,
15,
15,
15,
15,
15,
15,
15,
15,
15,
NGB
ED4
ED6
HED4
HHED6
CED6
100
65
65
100
100
200
25
18
25
42
65
200
—
—
18
—
18
100
NB
E4
E6
H4
HA
CE
STD
55.
360.
540.
540.
1960.
STD
55.
360.
540.
540.
1960.
—
—
STD
—
540.
1960.
110, 125
125
125
125
125
125
QJ2
QJH2
QJ2H
HQJ2H
10
22
42
100
—
—
—
—
—
—
—
—
QJ
QH
Q2
Q3
STD
70.
160.
1360.
—
—
—
—
—
—
—
—
60,
60,
60,
60,
70,
70,
70,
70,
FD6
FXD6
HFD6
HFXD6
CFD6
65
65
100
100
200
35
35
65
65
200
18
18
25
25
100
FD
FX
HF
H2
CF
190.
190.
1900.
1900.
2770.
STD
STD
1900.
1900.
2770.
STD
STD
1900.
1900.
2770.
70,
70,
70,
70,
70,
80,
80,
80,
80,
80,
250
FD6
FXD6
HFD6
HFXD6
CFD6
65
65
100
65
200
35
35
65
35
150
18
18
35
25
100
FD
FX
HF
H2
CF
STD
STD
1680.
1680.
1895.
STD
STD
1680.
1680.
2450.
STD
STD
1680.
1680.
2610.
250
250
250
250
250
400
JXD6
JD6
HJXD6
HJD6
SJD6
SHJD6
CJD6
SCJD6
65
65
100
100
65
100
200
200
35
35
65
65
35
65
200
200
25
35
35
35
25
35
100
100
JX
J6
H6
H5
SJ
S2
CJ
SC
STD
STD
1825.
1825.
2200.
2500.
2650.
4385.
STD
STD
1825.
1825.
2200.
2500.
2650.
4385.
STD
STD
1825.
1825.
2200.
2500.
2650.
4385.
200,
200,
200,
200,
200,
200,
200,
200,
225,
225,
225,
225,
300,
300,
300,
300,
250,
250,
250,
250,
400
400
400
400
600
LXD6
LD6
HLXD6
HLD6
SLD6
SHLD6
CLD6
SCLD6
65
65
100
100
65
100
200
200
35
35
65
65
35
65
150
150
25
25
35
35
25
35
100
100
LX
L6
HL
HO
SL
S6
CL
C6
STD
STD
1825.
1825.
2500.
4325.
3830.
5130.
STD
STD
1825.
1825.
2500.
4325.
3830.
5130.
STD
STD
1825.
1825.
2500.
4325.
3830.
5130.
450,
250,
250,
250,
300,
300,
300,
300,
500,
300,
300,
300,
400,
400,
400,
400,
600
350,
350,
350,
500,
500,
500,
500,
225
240V
Ref.
Catalog
Number
240V
20,
20,
20,
20,
20,
20,
20,
20,
20,
20,
25,
25,
25,
25,
25,
25,
25,
25,
25,
25,
30,
30,
30,
30,
30,
30,
30,
30,
30,
30,
35,
35,
35,
35,
35,
35,
35,
35,
35,
35,
40,
40,
40,
40,
40,
40,
40,
40,
40,
40,
80,
80,
80,
80,
90,
90,
90,
90,
100,
100,
100,
100,
90,
90,
90,
90,
90,
100,
100,
100,
100,
100,
110,
110,
110,
110,
110,
110,
110,
110,
110,
300,
300,
300,
300,
50,
50,
50,
50,
50,
50,
50,
50,
50,
50,
125,
125,
125,
125,
125,
125,
125,
125,
125,
350,
350,
350,
350,
60,
60,
60,
60,
60,
60,
60,
60,
60,
60,
70,
70,
70,
70,
70,
70,
70,
70,
70,
70,
80,
80,
80,
80,
80,
80,
80,
80,
80,
80,
150,
150,
150,
150,
150,
150,
150,
150,
150,
90, 100
90, 100
90, 100
90, 100
90, 100
100
90, 100
90, 100
90, 100
90, 100
175,
175,
175,
175,
175,
175,
175,
175,
175,
200,
200,
200,
200,
200,
200,
200,
200,
200,
225
225
225
225
225
225
225
225
225
400
400
400
400
400, 450, 500, 600
400, 450, 500, 600
400, 450, 500, 600
600
600
600
600
When an ED4, ED6, HED4, QJ2, QJH2, QJ2H, FD6, HFD6, or FXD6 frame main breaker, vertically mounted, is required, price as a main
breaker panel and add from the table for the main breaker mounting.
Vertically Mounted Main Breaker
Ampere
Rating
100
225
Breaker
Type(s)
Number of Poles
2-Pole 3-Pole
295.
295.
295.
320.
320.
320.
QJ2, QJH2, QJ2-H
FXD6, FD6, HFD6
390.
625.
415.
670.
6
6
10
ED4
ED6
HED4
Unit Space
(in.)
Subfeed Breakers
Provisions
for
Future $
FD6 , FXD6
Ampere
Ratings
For Load
Maximum Interrupting Rating
(kA) Symmetrical
240V AC 480V AC 600V AC
Twin
1220.
1540.
220.--
70 – 250
65
35
HFD6 ,HFXD6 Twin
2440.
3010.
220.--
70 – 250
100
65
25
JD6 , JXD6
Single
1720.
2180.
290.--
200 – 400
65
35
25
HJD6 , HJXD6 Single
3160.
4220.
290.--
200 – 400
100
65
35
Discount Schedule PBSB
22
Interchangeable trip main breakers are mounted at
top of panel only.
Vertically mounted.
Twin mounted subfeed breakers are mounted at the
bottom of panelboard only and adds 24" to the panel
height.
Subfeed breaker is mounted at bottom of panelboard
only. 400 amp subfeed breaker adds 24" to the panel
height. (Only for use with MLO)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-25
PANELBOARDS
Breaker
Type
Mounting Position
When Used as
Subfeed Breaker List Price $
Vertical
2-Pole 3-Pole
Panelboards
Type P2 Panelboards
Selection
Branch Circuit Breakers
Max. Bolt-On
Amp Breaker
Rating Type
100
125
225
Amps
15–60
BL
70
80–100
15–60
BLH
70
80–100
15–55
HBL
60–100
BL, HID
15–30
15–60
BLR (240V)
70–100
15–30
BLE (GFCI)
40–60
20–30
BLEH
15–60
15–30
BLF (GFCI)
40–60
15–30
BLHF (GFCI)
40–60
BGL 햳
15–30
BAF
15–20
BAFH
15–20
15–60
BQD
70–100
15–60
NGB
70–100
110–125
15–60
ED4
70–100
110–125
15–60
ED6
70–100
110–125
15–60
70–100
HED4햲
110–125
15–60
HHED6
70–100
110–125
QJ2
60–225
QJH2
60–225
QJ2H
60–225
HQJ2H
60–225
List Price $
1-Pole 2-Pole 3-Pole
25.
35.
—
35.
75.
—
85.
—
45.
—
—
220.
—
420.
—
140.
140.
160.
160.
—
160.
180.
85.
200.
130.
210.
—
160.
260.
—
—
—
—
320.
320.
—
—
—
—
—
—
—
—
45.
85.
140.
85.
130.
200.
270.
400.
75.
110.
190.
330.
330.
—
530.
240.
250.
280.
300.
100.
330.
340.
270.
400.
360.
420.
710.
440.
520.
880.
460.
600.
1100.
700.
860.
1590.
700.
860.
1600.
420.
930.
1080.
—
140.
190.
210.
220.
300.
310.
380.
490.
—
—
—
—
—
—
—
—
—
—
—
130.
—
—
380.
490.
480.
540.
910.
590.
670.
1120.
700.
790.
1350.
880.
960.
1800.
890.
990.
1810.
880.
1140.
1410.
1940.
Provisions
for
Future $
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
170.
170.
170.
170.
Maximum Interrupting Rating (kA)
120V AC
120/240V AC 240V AC
10
—
—
—
—
—
—
—
10
—
—
10
—
22
—
10
—
22
—
10
10
22
—
—
100
100
100
65
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
277V AC
—
—
10
—
—
22
—
—
—
10
10
—
—
—
—
—
—
—
—
—
—
—
—
—
100
100
100
—
65
65
65
65
65
65
65
65
100
100
100
10
22
42
100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
—
25
25
25
22
—
—
—
—
—
—
—
—
65
42
—
—
—
—
—
480V AC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
25
25
25
—
18
18
25
25
25
25
25
25
—
42
42
—
—
—
—
600V AC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
18
18
18
18
18
18
—
—
—
—
—
—
—
250V DC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
14
14
14
14
—
30
—
30
—
—
30
—
—
—
30
—
—
—
—
—
Branch Neutral Connections
Wire Range
Max. Number of Connections
Max. Amp햴
#14-#6
#14-1/0
#6-350 kcmil
(1) #4-600 kcmil
or (2) #6-250 kcmil
26
28
3
65
125
250
1
400
PANELBOARDS
10
Branch Device Limitations
For panels applied on systems requiring neutral connections,
some limitations apply. By application rule (NEC 408.14) lighting
and appliance panels are limited to 42 circuits installed. Each
overcurrent device pole counts as a circuit. Additional limitations
for these panels are based on available neutral connections.
—
10
—
22
22
—
65
65
10
—
—
—
10
—
22
—
10
—
22
10
—
—
65
65
100
100
100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
햲
1-Pole HED 4 15–30A Rated 65kA 35 through 100A Rated 25kA.
Two pole breaker is one phase and neutral.
Three pole is two phase and neutral.
햴 Based on 75 degree copper.
NOTE: QJ Breakers are single mounted in unit space and take 6" of unit space. Limited to
(4) per panel max. BL, HBL, BLH and BQD breakers are mounted in common
mountings in 3" or (6) pole increments. ED4, ED6, HED4 and HHED6 breakers are
mounted in common mountings in 3" or (6) pole increments.
햳
10-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P2 Panelboards
Selection
Typical Catalog Numbers
Main Lugs Only
Maximum
Panel
Amp Rating
125
250
400
600
Maximum
1-Pole
Circuits
Box
Height
inches (mm)
Catalog
Number
3Ø4W 208Y/120V
List
Price $
Catalog
Number
1Ø3W 120/240V
List
Price $
Catalog
Number
3Ø4W 480Y/277V
List
Price $
18
30
42
18
30
42
18
30
42
54
18
30
42
54
26 (660)
32 (813)
38 (965)
32 (813)
38 (965)
44 (1118)
38 (965)
44 (1118)
50 (1270)
56 (1422)
38 (965)
44 (1118)
50 (1270)
56 (1422)
P2C18ML125ATS
P2C30ML125ATS
P2C42ML125ATS
P2C18ML250ATS
P2C30ML250ATS
P2C42ML250ATS
P2C18ML400ATS
P2C30ML400ATS
P2C42ML400ATS
P2C54ML400ATS
P2C18ML600ATS
P2C30ML600ATS
P2C42ML600ATS
P2C54ML600ATS
940.00
1140.00
1360.00
990.00
1200.00
1420.00
1350.00
1550.00
1780.00
1970.00
1630.00
1840.00
2070.00
2260.00
P2A18ML125ATS
P2A30ML125ATS
P2A42ML125ATS
P2A18ML250ATS
P2A30ML250ATS
P2A42ML250ATS
P2A18ML400ATS
P2A30ML400ATS
P2A42ML400ATS
P2A54ML400ATS
P2A18ML600ATS
P2A30ML600ATS
P2A42ML600ATS
P2A54ML600ATS
840.00
1060.00
1250.00
910.00
1100.00
1330.00
1240.00
1440.00
1710.00
1800.00
1580.00
1780.00
1950.00
2140.00
P2E18ML125ATS
P2E30ML125ATS
P2E42ML125ATS
P2E18ML250ATS
P2E30ML250ATS
P2E42ML250ATS
P2E18ML400ATS
P2E30ML400ATS
P2E42ML400ATS
P2E54ML400ATS
P2E18ML600ATS
P2E30ML600ATS
P2E42ML600ATS
P2E54ML600ATS
990.00
1270.00
1550.00
1090.00
1380.00
1630.00
1350.00
1550.00
1780.00
1970.00
1630.00
1840.00
2070.00
2260.00
26 (660)
32 (813)
38 (965)
26 (660)
32 (813)
38 (965)
32 (813)
38 (965)
44 (1118)
38 (965)
44 (1118)
50 (1270)
50 (1270)
56 (1422)
62 (1575)
68 (1727)
56 (1422)
62 (1575)
68 (1727)
74 (1727)
P2C18BL100ATS
P2C30BL100ATS
P2C42BL100ATS
P2C18NB125ATS
P2C30NB125ATS
P2C42NB125ATS
P2C18QJ225ATS
P2C30QJ225ATS
P2C42QJ225ATS
P2C18FX250ATS
P2C30FX250ATS
P2C42FX250ATS
P2C18JX400ATS
P2C30JX400ATS
P2C42JX400ATS
P2C54JX400ATS
P2C18LX600ATS
P2C30LX600ATS
P2C42LX600ATS
P2C54LX600ATS
1270.00
1510.00
1810.00
1710.00
1920.00
2190.00
2590.00
2800.00
3020.00
2990.00
3200.00
3430.00
3490.00
3710.00
4850.00
5080.00
6320.00
6550.00
6780.00
7000.00
P2A18BL100ATS
P2A30BL100ATS
P2A42BL100ATS
P2A18NB125ATS
P2A30NB125ATS
P2A42NB125ATS
P2A18QJ225ATS
P2A30QJ225ATS
P2A42QJ225ATS
P2A18FX250ATS
P2A30FX250ATS
P2A42FX250ATS
P2A18JX400ATS
P2A30JX400ATS
P2A42JX400ATS
P2A54JX400ATS
P2A18LX600ATS
P2A30LX600ATS
P2A42LX600ATS
P2A54LX600ATS
1170.00
1380.00
1600.00
1490.00
1710.00
1930.00
2140.00
2370.00
2600.00
2550.00
2780.00
3000.00
2930.00
3140.00
3370.00
3600.00
5550.00
5790.00
6010.00
6240.00
P2E18BQ100ATS
P2E30BQ100ATS
P2E42BQ100ATS
P2E18NB125ATS
P2E30NB125ATS
P2E42NB125ATS
P2E18FX225ATS
P2E30FX225ATS
P2E42FX225ATS
P2E18FX250ATS
P2E30FX250ATS
P2E42FX250ATS
P2E18JX400ATS
P2E30JX400ATS
P2E42JX400ATS
P2E54JX400ATS
P2E18LX600ATS
P2E30LX600ATS
P2E42LX600ATS
P2E54LX600ATS
1660.00
1910.00
2450.00
1980.00
2240.00
2780.00
2770.00
3060.00
3030.00
3170.00
3470.00
3450.00
4380.00
4610.00
4850.00
5080.00
6320.00
6550.00
6780.00
7000.00
Main Circuit Breaker
100
125
225
250
400
600
18
30
42
18
30
42
18
30
42
18
30
42
18
30
42
54
18
30
42
54
10
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-27
Panelboards
Type P2 Panelboard Modifications and Additions
Selection
Enclosures
Subfeed, Feed-Thru and Split Bus
Extra Gutter to
Sides or Ends of the Can
Unit
Ampere List Price $
Connector
Space
Rating 3-Pole 2-Pole Cu/Al Wire Range (inches)
List
Price $
Description
6" end gutter . . . . . . . . . . . . . . . . . . . . .
2" side gutter . . . . . . . . . . . . . . . . . . . . .
Barrier in gutter (add to extra
gutter price) . . . . . . . . . . . . . . . . . . . .
24" wide . . . . . . . . . . . . . . . . . . . . . . . . .
Hinged trims . . . . . . . . . . . . . . . . . . . . .
Piano hinged trims . . . . . . . . . . . . . . . .
Door-in-door trims . . . . . . . . . . . . . . . .
Screw to the box trims . . . . . . . . . . . . .
235.
200.
200.
235.
160.
360.
360.
160.
Trim mounted devices . . . . . . . See page 10–72
• Pilot lights
• Toggle switches
• Push buttons
(Devices mounted and wired to the trim should
also have hinged trim specified)
Painted boxes . . . . . . . . . . . .
See page 10–72
Custom colors . . . . . . . . . . . See painted boxes
Increase gauge trims
and boxes . . . . . . . . . . . . .
See page 10–72
Stainless steel trims
and boxes, Type 1 . . . . . .
See page 10–72
Aluminum trims
and boxes, Type 1 . . . . . .
See page 10–72
Meters
(Contact sales for pricing and application
engineering for space requirements)
Panel Skirts
See page 10-73
Special Locks
TEY . . . . . . . . . . . . . . . . . . . . . . . . . . .
TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . .
Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . .
LL803 . . . . . . . . . . . . . . . . . . . . . . . . .
LL806 . . . . . . . . . . . . . . . . . . . . . . . . .
Yale 47 (NYC) . . . . . . . . . . . . . . . . . . .
235.
255.
235.
235.
235.
425.
Panel Bus Modifications
Main Bus
Catalog Amperes Rating
Number 125A 250A 400A
750 A/SI AL.
B
190.
190.
340.
Copper (tin pltd.)
F
340.
340.
910. 1335.
Copper (silver pltd.) E
455.
455.
475. 1220.
1000 A/SI Copper
(tin pltd.)
G
730.
730. 1020. 2110.
1000 A/SI Copper
(silver pltd.)
H
600A
645.
Copper MLO Only
Subfeed (Double) Lugs for Main Lug
Panelboards Only
100/125
85.
85.
(2)—#12 AWG-2/0
kcmil
225/250
85.
85.
(2)—#6 AWG-350
kcmil
400
235.
235.
3
6
(4)—250 kcmil
(2)—600 kcmil
12
Feed-Thru Lugs — Cannot Be Used in
Conjunction with TVSS or Subfeed
Breakers
100/125 190.
160.
(1)—#12 AWG-2/0
kcmil
3
225/250 190.
160.
(1)—#6 AWG-350
kcmil
6
400
490.
445.
(2)—250 kcmil
(1)—600 kcmil
9
600
720.
680.
(2)—250-500 kcmil 12
Split Bus
Requires feed thru lugs also to feed sub
panel section and for space requirements.
100/125 245.
180.
(1)—#12 AWG-2/0
kcmil
225/250 245.
180.
(1)—#6 AWG-350
kcmil
9
9
400
490.
445.
(2)—250 kcmil
(1)—600 kcmil
600
720.
680.
(2)—250-500 kcmil 15
12
Contactor Mains or Submain
See Page 10-71
• Asco 920 through 225 amps – adds
12" unit space as main, 15" unit
space as submain
• Asco 911 through 150 amps – adds
21" unit space
• Siemens LEN through 30 amps –
adds 12" unit space, makes box 10" deep
Branch and Main Breaker Accessories
See breaker section of this catalog.
• Handle blocks
• Handle locks
• Aux. Contacts���
• UVR햲
1070. 1070. 1240. 2355.
10
Increase Capacity Neutral up to 200%
Main Bus Amps
List Price Adder $
125
250
400
600
340.
530.
560.
625.
PANELBOARDS
See page 10-29 for unit space adders
and compatibility with other options.
햲
Main Bus Amps
List Price Adder $
125
250
400
600
115.
190.
285.
285.
Bus mounted TVSS . . . . . . see section 9
Service Entrance Label
Type P2 Panelboards are factory labeled
suitable for use as service entrance
equipment when NEC requirements are met.
A panelboard cannot have more than six
main disconnects, unless it is a lighting and
appliance branch panelboard. Lighting and
appliance branch panelboards are limited to
two main disconnects.
Grounding of Panelboards
Ground Bars except for brazed to box are
shipped with the panel interior factory
mounted.
• Non-Insulated Equipment Ground Bar – STD
• Copper Non-Insulated Ground Bar. . . . . . 40.
• Al Insulated Equipment Ground Bar . . . . 40.
• Cu Insulated Equipment Ground Bar . . . . 75.
• Ground Bar Brazed to Box . . . . . . . . . . . 245.
(recommended for painted boxes)
Shunt Trip on Main or Branch
BL, BLH, HBL, ED4, HED4, HED6,
HHED6 uses 1" unit space for shunt
trip. All others may be used on mains or
subfeeds. See breaker section for list
price adders.
QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,
HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,
HJXD6
Time Clocks
Time clocks may be mounted in a 23"
enclosure to be cable connected to the
panel. Sangamo, Tork or Paragon time
clock can be supplied and mounted in
panelboard cabinet. Adds 12" to panel
height. Mounts in Sub-area.
List
Price $
Description
Time Clock (1 or 2-pole, single
or double throw contacts;
3-pole, single throw)
277V maximum with plain dial
Options—
Astronomical dial
An omitting device
Reserve power or carryover
Space and mounting
provisions only
1070.
210.
75.
2450.
540.
Subfeed Main Breaker Panels
Double Lugs
Ratings Amps Poles
2
100
3
2
225
3
2
400
3
Mount Ht. List Price $
575.
21"
620.
635.
21"
670.
760.
18"
825.
Accessories on 1" pole breakers (BL, BQD, ED) will take
unit space.
10-28
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P2 Panelboard Standard Modifications and Additions
Selection
Box Size Additions for Optional Features
Main Lugs
Main Breakers
125A
250A
400A
*Min. Box Size
200% Neutral
(lug type)
Std. Lugs
(100% Neut. PNL)
CU Lugs (100%
Neut. PNL)
Comp Lugs
(100% Neut. PNL)
Feed-thru
Standard Lugs
26"
0
32"
0
0
0
0
6
6
6
Feed-thru Cu Lugs
Feed-thru
Comp Lugs
Subfeed Standard
Lugs
600A
Options
Split Bus
(1) FD Subfeed
(Horizontal Mtg.)
(2) FD Subfeed
(Vertical Mtg.)
TVSS
125A
125A
Horiz. Horiz.
BL, BQD,
ED, NGB CED
125A
Vert.
225A
Horiz.
225A
Vert.
225A
Horiz.
250A
Vert.
250A
Vert.
400A
JD
400A
CJD
600A
LD
600A
CLD
62"
0
56"
0
62"
0
ED
QJ
QJ
FD
FD
26"
0
32"
0
32"
0
32"
N/A
38"
0
38"
N/A
44"
0
50"
0
50"
0
0
0
0
0
0
0
0
0
0
0
0
0
0
6
0
N/A
N/A
0
N/A
0
N/A
0
0
0
0
0
0
6
6
6
N/A
N/A
0
N/A
0
N/A
0
0
0
0
0
0
6
6
12
12
6
6
6
6
6
12
N/A
N/A
N/A
6
N/A
N/A
6
6
N/A
N/A
6
6
6
6
12
12
12
12
12
N/A
12
N/A
6
12
12
N/A
N/A
N/A
6
N/A
6
N/A
12
12
12
12
N/A
N/A
0
6
N/A
6
6
12
6
6
12
N/A
6
12
—
6
N/A
—
6
N/A
—
6
N/A
—
N/A
N/A
—
6
N/A
—
N/A
12
—
6
12
—
6
12
N/A
6
12
—
6
12
—
6
12
—
6
12
N/A
24
24
24
N/A
N/A
N/A
N/A
N/A
24
24
24
24
N/A
N/A
N/A
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
38"
38"
6 (all) 6 (all)
CFD
Split bus is paired with feed-thru lugs by default. Feed-thru lugs are to feed the section after the split.
NOTE: N/A = OPTION NOT AVAILABLE
*Min. Box Size, corresponding to 9" of Unit Space.
Compression Lugs
Style
MLO
Amp
Rating
125
250
Breaker
Type
N/A
N/A
400
N/A
600
N/A
225
ED4, ED6, HED4
HHED6, CED6
QJ2, QJH2, QJ2H
250
FXD6, HFD6, CFD6
100
Main
Breaker
Compression
Connectors
(1)#6 - 350 kcmil Al/Cu
(1)#6 - 350 kcmil Al/Cu
(1) 400 - 600 kcmil Cu or
(2)#6 - 350 kcmil Al/Cu
(2)#6 - 350 kcmil Cu or Cu/Al or
400 - 600 kcmil Al/Cu
(1)#14-2/0 AWG Cu or Al
(1)#6 AWG - 350 kcmil Cu or Al
(1)#6 AWG - 350 kcmil Cu or Al
JD6, JXD6, HJD6,
CJD6, SJD6, SHJD6, (2)#1/0 AWG - 500 kcmil Cu or Al
SCJD6
LD6, LXD6, HLD6,
CJD6, SLD6, SHLD6, (2)#2/0 AWG - 500 kcmil Cu or Al
SCLD6
400
600
Box Height
Addition
6
6
List Price $
3Ø4W 3Ø3W 1Ø3W 1Ø2W
105.
75.
75.
65.
105.
75.
75.
65.
6
150.
115.
115.
95.
6
200.
150.
150.
115.
115.
85.
85.
85.
225.
180.
180.
180.
225.
180.
180.
180.
9
305.
235.
235.
235.
6
305.
235.
235.
235.
Box must go to 24" wide on CED6 breaker only
Add 6" to box height for NØ
Box must go to 24" wide
Box must go to 24" wide for all breakers
Requires an additional 6.0" box height
Alternate Lugs
Breaker Type
400
N/A
Main Breaker
400
JD6, JXD6, HJD6,
CJD6, SJD6, SHJD6,
SCJD6
Discount Schedule PBSB
Compression Connectors
(1) 250 - 750 kcmil or
(2)#3/0 AWG - 250 kcmil Cu or Al
(1)#4/0 AWG - 750 kcmil Cu or Al
Box Height Addition
List Price $
6
275.
6
510.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
PANELBOARDS
Amp Rating
MLO
10
Style
10-29
Panelboards
Type P2 Panelboard Connector Modifications
Selection
Enclosure Modifications
List Price Adder $
Description
NEMA 3R enclosure s
NEMA 3R/12 enclosure s
Gasket between trim
and box (Type 1)
Panel
Width
20"
Panel
Width
24"
860.
1175.
680.
1180.
1180.
900.
NEMA-4 for Type P2
Water Tight, Dust Tight, Steel Enclosure
(consult plant for actual enclosure size)
Box Height
Inches
26
32
38
44
50
56
62
68
74
Enclosure Size
H
W
26
20
32
20
38
20
44
20
50
20
56
20
62
20
68
20
74
20
D
5.75
5.75
5.75
5.75
5.75
5.75
5.75
5.75
5.75
List Price
Adder $
3920.
4230.
5330.
6605.
8015.
16260.
20545.
24835.
29340.
NEMA-4X for Type P2
Water Tight, Dust Tight and Corrosion Resistant
(consult plant for actual enclosure size)
Box Height
Inches
26
32
38
44
50
56
62
68
74
Enclosure - Stainless Steel
and Steel with Epoxy Coating
H
W
D
5.75
26
20
5.75
32
20
5.75
38
20
5.75
44
20
5.75
50
20
5.75
56
20
5.75
62
20
5.75
68
20
5.75
74
20
Enclosure - Fiberglass
Size (inches)
H
W
D
30
24
8
36
24
8
48
36
12
48
36
12
60
36
12
60
36
12
72
36
8
72
36
8
84
36
8
List
Price $
9000.
10145.
12085.
15805.
18710.
20265.
23710.
27435.
31155.
Remote Switch Modifications (see page 10-71)
Application For Remote Switch
Switch Type
920
911
PANELBOARDS
10
LEN
Modification
Adds 12" to unit space
≤ 225A Adds 21" unit space >225 ≤400 Amps Add 10" to width and 8" DP
minimum and 24" to height
30A Adds 15" to unit space
>30A 100 Adds 12" to unit space
7.7 Dp. Box min.
100 A ≤ 200 Adds 12" to unit space and 10" Dp. min.
10-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P2 Panelboard Kits and Accessories
Selection
Standard Enclosures
Catalog Number
Box
Height
Inches
26
32
38
44
50
56
62
68
74
Type 1
Box
B26
B32
B38
B44
B50
B56
B62
B68
B74
Standard Trim
Surface
S26B
S32B
S38B
S44B
S50B
S56B
S62B
S68B
S74B
Flush
F26B
F32B
F38B
F44B
F50B
F56B
F62B
F68B
F74B
Type 3R
NR26
NR32
NR38
NR44
NR50
NR56
NR62
NR68
NR74
Type 3R/12
WP26
WP32
WP38
WP44
WP50
WP56
WP62
WP68
WP74
Options For Type 1 Trims
Items must be ordered as manual line item on Spartanburg
Hinged trim – Replace “B” suffix with “H”
Door-in-door – Replace “B” suffix with “D”
Metal card holder – Replace “B” suffix with “M” on standard trim, add “M” suffix on optional trims
Option For 24" Wide Enclosures with Equal Gutter on Both Sides
24" wide with equal gutter on both sides - Add “24” as prefix
Breaker Kits and Accessories
Kit Number
BBKB32
BBKED32
Description
BL/BQD 6-pole 3" branch breaker kit
ED 6-pole 3" branch breaker kit
BBKNB32
BBKQ1
NGB 6-pole 3" branch breaker kit
QJ branch breaker kit for 2 and
3-pole single mount
BL, BQD, ED deadfront kit for
1" pole breakers
Deadfront filler 3"
Deadfront filler 6"
Branch neutral (P2)
P2 250A max. Bonding Kit
P2 400A max. Bonding Kit
P2 600A max. Bonding Kit
DFK1
DFFP3
DFFP6
BNK2
P2BK1
P2BK2
P2BK3
Contents
Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware
Kit contains breaker support, inter-phase barriers, (3) A/C connectors,
(1) B connector, hardware
Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware
Kit to contain all connectors and cover plates necessary
to mount both 2 and 3-pole breakers
Center strips 3", 6", 9," 15," 21" plus mounting hardware
3" empty space filler and hardware
6" empty space filler and hardware
Three tier lug with mounting hardware to increase neutral capacity
Bonding strap and hardware
Bonding strap and hardware
Bonding strap and hardware
List Price $
85.00
90.00
90.00
102.00
90.00
45.00
51.00
45.00
23.00
23.00
23.00
10
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-31
Panelboards
Type P2 Panelboards
Type 1 Box
Box is symmetrical
Dimensions
Box To Wall
Mounting Holes
2 in.
[ 51 ]
.31 in.
[8]
4.63 in.
[ 118 ]
Mounting
Dimple
Interior To Box
Mounting
Stubs
26 in. 32 in. 38 in.
44 in.
50 in.
햲 [ 660 ] [ 816 ] [ 965 ] [ 1118 ] [ 1270 ]
56 in. 62 in. 68 in. 74 in.
[ 1422 ] [ 1575 ] [ 1727 ] [ 1880 ]
4.63 in.
[ 118 ]
12.63 in.
[ 321 ]
15 in.
[ 381 ]
5.75 in.
[ 146 ]
2 in.
[ 51 ]
햲
20 in.
[ 508 ]
햲
Type 3R and 3R/12 Box
7.5 in.
[ 191 ]
.50 in.
[ 13 ]
2 in.
[ 51 ]
Mounting
Bracket
26 in. 32 in. 38 in. 44 in. 50 in.
햲
[ 660 ] [ 816 ] [ 965 ] [ 1118 ] [ 1270 ]
56 in. 62 in. 68 in. 74 in.
[ 1422 ] [ 1575 ] [ 1727 ] [ 1880 ]
2 in.
[ 51 ]
2 in.
[ 51 ]
10
20 in. 햲
[ 508 ]
1 in.
[25]
PANELBOARDS
21.5 in.
[ 546 ]
23.5 in.
[ 597 ]
10-32
5.75 in.
[ 146 ]
햲
햲 Dimensions
are interior of the box. Add 5/8" to width for absolute
dimension. Add 1/8" to height for absolute dimension.
Dimensions shown in inches and millimeters [ ].
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Type P3 Panelboards
Features
Another innovation from Siemens is
the P3 panel. It is a smaller, footprint
distribution panel to fit a large number
of applications that require more (or
larger) branch devices than the lighting
panel class offer. This panel offers a
wide array of factory-assembled
options, and has the ability to mix
breaker frames in unit space up to
250 amps. Bussing options for the P3
vary from the standard temperature
aluminum to temperature rated copper,
750 A/Si aluminum, and 1000A/Si
copper designs. All bussing in the P3
panel is tin-plated as a standard.
Silver-plated copper is offered as an
option on a copper bus. Integrated
time clocks, bus mounted contactors,
as mains or sub mains, split bus and
subfeed lugs (up to 400 amp) are just a
few of the options of this unique panel.
The P3 panel configurations, defined by
the unit space, allow for a given
amperage, main device, and box height.
The P3 panel starts with a 56" high box.
Breaker unit space can be mixed and
matched to meet customer
requirements. All 1" pole breakers (BL,
BQD, ED frames) are mounted in 3" or
6" pole increments. Breakers frames,
above 125 amps, are mounted in 6"
single or twin breaker mountings. As an
example panel, FD 250 amp and JD 400
amp breakers are mounted as subfeed
breakers outside of unit space.
Like other distribution panels, the P3
panel can have blank space added into
the panel to allow for future expansions
or modifications. Any expansions or
modifications must be in 3" increments.
BL, BQD and ED frame breakers have
3" or 6-pole kits and can be mixed in
unit space by these increments.
Breakers of the same frame can cross
from one mounting to another if
contiguous. QJ frame breakers are
mounted in 6" increments for two and
three pole single and twin mounted
units. Changes in the unit space length
for BL, BQD, or ED frame breakers
require an additional deadfront center
strip kit. Check with sales or the factory
for additional unit space kits.
General
Main Lug/Main Breaker
Enclosure – Standard Type 1 enclosure
is 24" wide x 7.75" deep. X Box Height
is determined by main device and unit
space. See charts for box height.
Voltage – 600V AC max.
250V DC max.
Amperage – 800 amp max.
Short Circuit Rating – 200 Kaic max.
symmetrical or equal to the lowest
rated device installed unless a series
rating is indicated. Panels with subfeed
or feed-thru lugs without a main device,
circuit breaker or fusible unit, are limited
to a three-cycle rating. The three-cycle
rating for the P3 panel is limited to 22
Kaic. Note that the main device may be
mounted remote from the panel.
Bussing – The P3 panel has more
options to meet market requirements.
The standard bussing is temperature
rated aluminum. The rating is per the
requirements of UL 67 – the standard
for panelboards. All aluminum bussing
is tin-plated. Optional bussing for the P3
panel is: 750 A/si aluminum,
temperature rated copper, and 1000
A/si copper. The copper bus option
for this panel is tin-plated.
Weight – Approximate
Total panelboard weight when filled
with a normal quantity of breakers and
accessories is about 5 lbs. (1 kg) per
inch (54g per mm) of box height.
Gauge Steel of Boxes Fronts,
Surface & Flush
Dimensions
Width
24"
(610)
in inches (mm)
Height
56 - 80"
(1422, 2032)
Gauge Steel
Box
Front
#16
#14
10
PANELBOARDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-33
Panelboards
Type P3 Panelboards
Selection/Dimensions
Panel Unit Space To Box Height Requirements
“B”
Dimension
Box Height
P3 Panels With Standard Line Lugs. Unit Space (starting with 9" and adding 6" increments) “A” Dimension
Main Lugs
Main Breakers
250A
250A
Horiz.
Vert.
250A
400A
400A
250A
400A
600A
800A
FD
FD
CFD
JD
CJD
600A
LD
600A
CLD
56
62
68
74
80
27
33
39
45
51
9
15
21
27
33
—
9
15
21
27
C
10.75 ���
16.00
D
13.50
17.88
16.00
16.00
17.88
17.88
21
27
33
39
45
21
27
33
39
45
21
27
33
39
45
21
27
33
39
45
15
21
27
33
39
C
7.25
—
—
—
—
—
—
9
15
21
27
33
—
9
15
21
27
Main Lug Wire Bending
Main Breaker Wire Bending
Breaker
Frame
FD Horiz.
FD Vert.
CFD
JD
CJD
LD
CLD
9
15
21
27
33
E
—
12.25
13.63
15.63
14.75
14.75
14.00
Panel Amps
250
400
F
20.13
25.38
31.38
29.38
35.38
29.38
35.38
600
800
햲
Standard Connectors
(1) #6 AWG - 350 kcmil
(2) #3/0 AWG - 250 kcmil
or (1) 600 kcmil
(2) #3/0 AWG - 500 kcmil
(2) 600 kcmil
This lug is removable.
Main Lug Wire Bending Diagram
Main Breaker Wire Bending Diagram
Branch Breaker
Side Gutters Inches (mm)
Reference
Letter
Panel
Width 24" (609)
A
B
C
D���
E
F
G
7.750
7.125
6.000
7.000
5.000
6.625
5.750
햲
(197)
(181)
(152)
(178)
(127)
(168)
(144)
Single branch mounting construction.
Branch Breaker Wire Bending Diagram
A
B
Box depth = 7.75 in. (197 mm)
Box width = 24 in. (610 mm)
Main Breaker Wire Bending
C
D/E
F
G
BL, BLH, HBL BL, BLH, HBL
BLF, BLFH
BLF, BLFH
BQD, BQD6
BQD, BQD6
ED, ED4, ED6
ED, ED4, ED6
HED4, HHED6 HED4, HHED6
QJ2, QJH2,
QJ2, QJH2,
QJ2-H, HQJ2H QJ2-H, HQJ2H
NGB
NGB
NEB, HEB
NEB, HEB
A
B
C
D/E
F
G
Panel Width
24 in. (610 mm)
PANELBOARDS
10
Branch Breaker Side Gutters
10-34
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Box depth = 7.75 in. (197 mm)
Box width = 24 in. (610 mm)
Main Lug Wire Bending
Panelboards
Type P3 Panelboards
Selection
Alternate Main Breakers
햲
Maximum Interrupting
Rating (kA)
240V
480V
600V
Ref.
Catalog
Number
250
FD6
FXD6
HFD6
HFXD6
CFD6 햲
65
65
100
100
200
35
35
65
65
150
18
18
25
25
100
FD
FX
HF
H2
CF
STD
STD
1900.
1900.
2770.
STD
STD
1900.
1900.
2770.
STD
STD
1900.
1900.
2770.
70,
70,
70,
70,
70,
400
JXD6 햲
JD6 햲
HJXD6 햲
HJD6 햲
SJD6 햲
SHJD6 햲
CJD6 햲
SCJD6 햲
65
65
100
100
65
100
200
200
35
35
65
65
35
65
200
200
25
25
35
35
25
35
100
100
JX
J6
H6
H5
SJ
S2
CJ
SC
STD
STD
2060.
2060.
2480.
2820.
3000.
4950.
STD
STD
2060.
2060.
2480.
2820.
3000.
4950.
STD
STD
2060.
2060.
2480.
2820.
3000.
4950.
200,
200,
200,
200,
200,
200,
200,
200,
225,
225,
225,
225,
300,
300,
300,
300,
250,
250,
250,
250,
400
400
400
400
600
LXD6 햲
LD6 햲
HLXD6 햲
HLD6 햲
SLD6 햲
SHLD6 햲
CLD6 햲
SCLD6
65
65
100
100
65
100
200
200
35
35
65
65
35
65
150
150
25
25
35
35
25
35
100
100
LX
L6
HL
HO
SL
S6
CL
C6
STD
STD
2060.
2060.
2820.
4890.
4320.
5790.
STD
STD
2060.
2060.
2820.
4890.
4320.
5790.
STD
STD
2060.
2060.
2820.
4890.
4320.
5790.
450,
250,
250,
250,
300,
300,
300,
300,
500,
300,
300,
300,
400,
400,
400,
400,
600
350,
350,
350,
500,
500,
500,
500,
Ampere
Rating
Breaker
Type
List Price Adder $
240V AC 480V AC 600V AC
Available Trip Values
80,
80,
80,
80,
80,
90,
90,
90,
90,
90,
100,
100,
100,
100,
100,
110,
110,
110,
110,
110,
300,
300,
300,
300,
125,
125,
125,
125,
125,
350,
350,
350,
350,
150,
150,
150,
150,
150,
200,
200,
200,
200,
200,
225,
225,
225,
225,
225,
250
250
250
250
250
400
400
400
400
400, 450, 500, 600
400, 450, 500, 600
400, 450, 500, 600
600
600
600
600
Vertically mounted
10
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-35
Panelboards
Type P3 Panelboards
Selection
Branch Circuit Breakers
Max. Bolt-On
Amp Breaker
Rating Type
BL
BLH
HBL
BL, (HID)
BLR (240V)
100
BLE (GFCI)
BLEH (GFCI)
BLF (GFCI)
BLHF (GFCI)
BGL���
BAF
BAFH
BQD
NGB
NEB
HEB
125
ED4
ED6
HED4
HHED6
225
QJ2
QJH2
QJ2H
HQJ2H
List Price $
Amps
1-Pole 2-Pole
15–60
25.
45.
70
35.
85.
80–100
—
140.
15–60
35.
85.
70
75.
130.
80–100
—
200.
15–55
85.
270.
60–100
—
400.
15–30
45.
75.
15–60
—
110.
70–100
—
190.
15–30
220.
330.
40–60
—
330.
15–30
420.
—
15–60
—
530.
15–30
140.
240.
40–60
—
250.
15–30
160.
280.
40–60
—
300.
15–30
—
100.
15–20
160.
330.
15–20
180.
340.
15–60
85.
270.
70–100
—
400.
15–60
130.
360.
70–100
210.
420.
110–125
—
710.
15–60
250.
370.
70–100
250.
490.
110–125
460.
890.
15–60
380.
560.
70–100
380.
690.
110–125 1160. 1280.
15–60
160.
440.
70–100
260.
520.
110–125
—
880.
15–60
—
460.
70–100
—
600.
110–125
—
1100.
15–60
490.
850.
70–100
490.
950.
110–125
—
1750.
15–60
—
860.
70–100
—
960.
110–125
—
1760.
60–225
—
420.
60–225
—
930.
60–225
—
1080.
60–225
—
—
3-Pole
140.
190.
210.
220.
300.
310.
380.
490.
—
—
—
—
—
—
—
—
—
—
—
130.
—
—
380.
490.
480.
540.
910.
560.
640.
1090.
710.
780.
1450.
590.
670.
1120.
700.
790.
1350.
950.
1070.
1970.
960.
1090.
1990.
880.
1140.
1410.
1940.
Future $
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
170.
170.
170.
170.
Provisions
for Maximum Interrupting
120V AC
120/240V AC
10
—
—
10
—
—
—
22
—
22
—
—
—
65
—
—
10
—
—
—
—
—
10
—
—
10
22
—
—
22
10
—
—
10
22
—
—
22
10
—
10
—
22
—
—
65
—
—
100
100
100
100
100
100
85
85
85
85
85
85
100
100
100
100
100
100
65
—
—
—
—
—
—
—
—
—
100
—
100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Rating (kA)
240V AC
—
—
10
—
—
22
—
65
—
10
10
—
—
—
—
—
—
—
—
—
—
—
—
65
100
100
100
85
85
85
100
100
100
—
65
65
65
65
—
—
—
—
100
100
100
10
22
42
100
Subfeed Breakers
PANELBOARDS
10
Breaker
Type
FD6 햳, FXD6
Provisions
for
Future $
220.--
Ampere
Ratings
For Load
70 – 250
Maximum Interrupting Rating
(kA) Symmetrical
240V AC 480V AC 600V AC
65
35
18
2440.
3010.
220.--
70 – 250
100
65
25
JD6 햴, JXD6
Single
1720.
2180.
290.--
200 – 400
65
35
25
HJD6 햴, HJXD6 Single
3160.
4220.
290.--
200 – 400
100
65
35
Branch Device Limitations
For panels applied on systems requiring
neutral connections, some limitations
BGL 2-pole is (1) phase and neutral 3-pole is (2)
phases and neutral.
NOTE:QJ Breakers are twin mounted in unit space and
take 6" of unit space. Limited to (6) per panel
max. BL, HBL, BLH and BQD breakers are
mounted in common mountings in 3" or (6) pole
increments. ED2, ED4, ED6, HED4 and HHED6
10-36
480V AC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
14
25
25
25
35
35
35
65
65
65
—
18
18
25
25
—
—
—
—
42
42
42
—
—
—
—
600V AC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
22
22
22
25
25
25
—
—
—
18
18
—
—
—
—
—
—
—
—
—
—
—
250V DC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
14
14
14
14
35
35
35
42
42
42
—
30
—
30
—
—
—
—
—
30
30
—
—
—
—
—
Neutral Connectors
Mounting Position
When Used as
Subfeed Breaker List Price $
Vertical
2-Pole 3-Pole
Twin
1220.
1540.
HFD6 햳,HFXD6 Twin
햲
277V AC
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
25
25
25
35
35
35
65
65
65
22
—
—
—
—
—
—
65
65
42
42
—
—
—
—
—
apply. By application rule (NEC 408.14),
lighting and appliance panels are limited
to 42 circuit installed. Each overcurrent
Wire Range
#14-#1/0
#14-3/0
#4 - 350 kcmil
(1)#4 - 600 kcmil or
(2)#6 - 250 kcmil
Max.
Number of
Max.
Connections Amps���
44
12
6
125
200
250
1
400
device pole counts as a circuit. Additional
limitations for these panels are based on
available neutral connections.
breakers are mounted in common mountings in
3" or (6) pole increments.
Twin mounted subfeed breakers are mounted at
bottom of panelboard only and adds 24" to the
panel height.
햴 Subfeed breaker is mounted at bottom of panelboard
only. 400 amp subfeed breaker adds 30" to the panel
height.
햳
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P3 Panelboards
Selection
Typical Catalog Numbers
Main Lugs Only – shown with aluminum bus, top fed, and surface trims
208Y/120V
Maximum
Panel Amp Rating
250
400
600
800
Maximum
Panel Amp Rating
250
400
600
800
Unit Space (inches)
3-Phase, 4-Wire
Catalog Number
27
33
39
45
51
21
27
33
39
45
21
27
33
39
45
21
27
33
39
45
P3C56ML250ATS
P3C62ML250ATS
P3C68ML250ATS
P3C74ML250ATS
P3C80ML250ATS
P3C56ML400ATS
P3C62ML400ATS
P3C68ML400ATS
P3C74ML400ATS
P3C80ML400ATS
P3C56ML600ATS
P3C62ML600ATS
P3C68ML600ATS
P3C74ML600ATS
P3C80ML600ATS
P3C56ML800ATS
P3C62ML800ATS
P3C68ML800ATS
P3C74ML800ATS
P3C80ML800ATS
Unit Space (inches)
240V
3-Phase, 3-Wire
Catalog Number
27
33
39
45
51
21
27
33
39
45
21
27
33
39
45
21
27
33
39
45
P3D56ML250ATS
P3D62ML250ATS
P3D68ML250ATS
P3D74ML250ATS
P3D80ML250ATS
P3D56ML400ATS
P3D62ML400ATS
P3D68ML400ATS
P3D74ML400ATS
P3D80ML400ATS
P3D56ML600ATS
P3D62ML600ATS
P3D68ML600ATS
P3D74ML600ATS
P3D80ML600ATS
P3D56ML800ATS
P3D62ML800ATS
P3D68ML800ATS
P3D74ML800ATS
P3D80ML800ATS
240/120V
List Price $
1760.00
1980.00
2220.00
2440.00
2660.00
2120.00
2350.00
2580.00
2800.00
3020.00
2410.00
2630.00
2850.00
3080.00
3310.00
2850.00
3080.00
3310.00
3530.00
3760.00
List Price $
1660.00
1890.00
2110.00
2330.00
2570.00
2050.00
2270.00
2490.00
2720.00
2950.00
2290.00
2510.00
2730.00
2970.00
3190.00
2730.00
2970.00
3190.00
3410.00
3640.00
3-Phase, 4-Wire
Catalog Number
P3B56ML250ATS
P3B62ML250ATS
P3B68ML250ATS
P3B74ML250ATS
P3B80ML250ATS
P3B56ML400ATS
P3B62ML400ATS
P3B68ML400ATS
P3B74ML400ATS
P3B80ML400ATS
P3B56ML600ATS
P3B62ML600ATS
P3B68ML600ATS
P3B74ML600ATS
P3B80ML600ATS
P3B56ML800ATS
P3B62ML800ATS
P3B68ML800ATS
P3B74ML800ATS
P3B80ML800ATS
408Y/277V
3-Phase, 4-Wire
Catalog Number
P3E56ML250ATS
P3E62ML250ATS
P3E68ML250ATS
P3E74ML250ATS
P3E80ML250ATS
P3E56ML400ATS
P3E62ML400ATS
P3E68ML400ATS
P3E74ML400ATS
P3E80ML400ATS
P3E56ML600ATS
P3E62ML600ATS
P3E68ML600ATS
P3E74ML600ATS
P3E80ML600ATS
P3E56ML800ATS
P3E62ML800ATS
P3E68ML800ATS
P3E74ML800ATS
P3E80ML800ATS
List Price $
1760.00
1980.00
2220.00
2440.00
2660.00
2120.00
2350.00
2580.00
2800.00
3020.00
2410.00
2630.00
2850.00
3080.00
3310.00
2850.00
3080.00
3310.00
3530.00
3760.00
120/240V or
250V DC Max.
1-Phase, 3-Wire
Catalog Number
P3A56ML250ATS
P3A62ML250ATS
P3A68ML250ATS
P3A74ML250ATS
P3A80ML250ATS
P3A56ML400ATS
P3A62ML400ATS
P3A68ML400ATS
P3A74ML400ATS
P3A80ML400ATS
P3A56ML600ATS
P3A62ML600ATS
P3A68ML600ATS
P3A74ML600ATS
P3A80ML600ATS
P3A56ML800ATS
P3A62ML800ATS
P3A68ML800ATS
P3A74ML800ATS
P3A80ML800ATS
List Price $
1660.00
1890.00
2110.00
2330.00
2570.00
2050.00
2270.00
2490.00
2720.00
2950.00
2290.00
2510.00
2730.00
2970.00
3190.00
2730.00
2970.00
3190.00
3410.00
3640.00
List Price $
480V���
3-Phase, 3-Wire
Catalog Number
List Price $
1970.00
2200.00
2430.00
2650.00
2880.00
2120.00
2350.00
2580.00
2800.00
3020.00
2410.00
2630.00
2850.00
3080.00
3310.00
2850.00
3080.00
3310.00
3530.00
3760.00
P3F56ML250ATS
P3F62ML250ATS
P3F68ML250ATS
P3F74ML250ATS
P3F80ML250ATS
P3F56ML400ATS
P3F62ML400ATS
P3F68ML400ATS
P3F74ML400ATS
P3F80ML400ATS
P3F56ML600ATS
P3F62ML600ATS
P3F68ML600ATS
P3F74ML600ATS
P3F80ML600ATS
P3F56ML800ATS
P3F62ML800ATS
P3F68ML800ATS
P3F74ML800ATS
P3F80ML800ATS
1660.00
1890.00
2110.00
2330.00
2570.00
2050.00
2270.00
2490.00
2720.00
2950.00
2290.00
2510.00
2730.00
2970.00
3190.00
2730.00
2970.00
3190.00
3410.00
3640.00
10
PANELBOARDS
햲
For 600V, change “F” in position 3 to “G.” Price only
branch breakers with 600V ratings.
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-37
Panelboards
Type P3 Panelboards
Selection
Typical Catalog Numbers
Main Circuit Breaker – shown with aluminum bus, top fed, and surface trims
Maximum
Panel Amp Rating
250
400
600
Maximum
Panel Amp Rating
250
400
600
List Price $
240/120V
3-Phase, 4-Wire
Catalog Number
21
27
33
39
45
9
15
21
27
33
9
15
21
27
33
P3C56FD250ATS
P3C62FD250ATS
P3C68FD250ATS
P3C74FD250ATS
P3C80FD250ATS
P3C56JD400ATS
P3C62JD400ATS
P3C68JD400ATS
P3C74JD400ATS
P3C80JD400ATS
P3C56LD600ATS
P3C62LD600ATS
P3C68LD600ATS
P3C74LD600ATS
P3C80LD600ATS
3430.00
3660.00
3880.00
4110.00
4340.00
3830.00
4050.00
5190.00
5420.00
5650.00
6660.00
6890.00
7120.00
7340.00
7570.00
P3B56FD250ATS
P3B62FD250ATS
P3B68FD250ATS
P3B74FD250ATS
P3B80FD250ATS
P3B56JD400ATS
P3B62JD400ATS
P3B68JD400ATS
P3B74JD400ATS
P3B80JD400ATS
P3B56LD600ATS
P3B62LD600ATS
P3B68LD600ATS
P3B74LD600ATS
P3B80LD600ATS
Unit Space (inches)
240V
3-Phase, 3-Wire
Catalog Number
List Price $
408Y/277V
3-Phase, 4-Wire
Catalog Number
21
27
33
39
45
9
15
21
27
33
9
15
21
27
33
P3D56FD250ATS
P3D62FD250ATS
P3D68FD250ATS
P3D74FD250ATS
P3D80FD250ATS
P3D56JD400ATS
P3D62JD400ATS
P3D68JD400ATS
P3D74JD400ATS
P3D80JD400ATS
P3D56LD600ATS
P3D62LD600ATS
P3D68LD600ATS
P3D74LD600ATS
P3D80LD600ATS
3340.00
3570.00
3790.00
4020.00
4240.00
4090.00
3850.00
4090.00
4310.00
4540.00
6260.00
6500.00
6720.00
6950.00
7180.00
P3E56FD250ATS
P3E62FD250ATS
P3E68FD250ATS
P3E74FD250ATS
P3E80FD250ATS
P3E56JD400ATS
P3E62JD400ATS
P3E68JD400ATS
P3E74JD400ATS
P3E80JD400ATS
P3E56LD600ATS
P3E62LD600ATS
P3E68LD600ATS
P3E74LD600ATS
P3E80LD600ATS
List Price $
3430.00
3660.00
3880.00
4110.00
4340.00
3830.00
4050.00
5190.00
5420.00
5650.00
6660.00
6890.00
7120.00
7340.00
7570.00
List Price $
3450.00
3670.00
3890.00
4120.00
4350.00
5190.00
4940.00
5190.00
5420.00
5650.00
6660.00
6890.00
7120.00
7340.00
7570.00
120/240V or
250V DC Max
1-Phase, 3-Wire
Catalog Number
List Price $
P3A56FD250ATS
P3A62FD250ATS
P3A68FD250ATS
P3A74FD250ATS
P3A80FD250ATS
P3A56JD400ATS
P3A62JD400ATS
P3A68JD400ATS
P3A74JD400ATS
P3A80JD400ATS
P3A56LD600ATS
P3A62LD600ATS
P3A68LD600ATS
P3A74LD600ATS
P3A80LD600ATS
3540.00
3770.00
4000.00
4220.00
4450.00
3260.00
4720.00
4940.00
5180.00
5410.00
6260.00
6500.00
6720.00
6950.00
7180.00
480V ���
3-Phase, 3-Wire
Catalog Number
List Price $
P3F56FD250ATS
P3F62FD250ATS
P3F68FD250ATS
P3F74FD250ATS
P3F80FD250ATS
P3F56JD400ATS
P3F62JD400ATS
P3F68JD400ATS
P3F74JD400ATS
P3F80JD400ATS
P3F56LD600ATS
P3F62LD600ATS
P3F68LD600ATS
P3F74LD600ATS
P3F80LD600ATS
3540.00
3770.00
4000.00
4220.00
4450.00
3260.00
4720.00
4940.00
5180.00
5410.00
6260.00
6500.00
6720.00
6950.00
7180.00
For 600V, change “F” in position 3 to “G.” Price only
branch breakers with 600V ratings.
PANELBOARDS
10
햲
Unit Space (inches)
208Y/120V
3-Phase, 4-Wire
Catalog Number
10-38
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P3 Panelboard Modifications and Additions
Selection
Subfeed, Feed-Thru and Split Bus
Enclosures
Ampere
Rating
Extra Gutter to
Sides or Ends of the Can
List
Price $
Description
6" end gutter . . . . . . . . . . . . . . . . . . . . .
2" side gutter . . . . . . . . . . . . . . . . . . . . .
Barrier in gutter (add to extra
gutter price) . . . . . . . . . . . . . . . . . . . .
Hinged trims . . . . . . . . . . . . . . . . . . . . .
Piano hinged trims . . . . . . . . . . . . . . . .
Door-in-door trims . . . . . . . . . . . . . . . .
Screw to the box trims . . . . . . . . . . . . .
235.
200.
200.
160.
360.
360.
160.
Trim mounted devices . . . . . . . See page 10–72
• Pilot lights
• Toggle switches
• Push buttons
(Devices mounted and wired to the trim should
also have hinged trim specified)
Painted boxes . . . . . . . . . . . .
See page 10–72
Custom colors . . . . . . . . . . . See painted boxes
Increase gauge trims
and boxes . . . . . . . . . . . . .
See page 10–72
Stainless steel trims
and boxes, Type 1 . . . . . .
See page 10–72
Aluminum trims
and boxes, Type 1 . . . . . .
See page 10–72
Meters
(Contact sales for pricing and application
engineering for space requirements)
Panel Skirts
See page 10-73
Special Locks
TEY . . . . . . . . . . . . . . . . . . . . . . . . . . .
TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . .
Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . .
LL803 . . . . . . . . . . . . . . . . . . . . . . . . .
LL806 . . . . . . . . . . . . . . . . . . . . . . . . .
Yale 47 (NYC) . . . . . . . . . . . . . . . . . . .
235.
255.
235.
235.
235.
425.
Panel Bus Modifications
Amperes Rating
Main Bus
Catalog
Number
125A 250A 400A 600A
750 A/SI AL.
Copper (tin pltd.)
B
F
190.
340.
190.
340.
340. 645.
910. 1335.
475. 1220.
Copper (silver pltd.) E
455.
455.
1000 A/SI Copper
(tin pltd.)
G
730.
730. 1020. 2110.
1000 A/SI Copper
(silver pltd.)
H
1070. 1070. 1240. 2355.
List Price $
3-Pole
2-Pole
Connector
Cu/Al Wire Range
Subfeed (Double) Lugs for Main Lug
Panelboards Only
225/250
400
85.
85.
235.
235.
(2)—#6 AWG-350
kcmil
(2)—250 kcmil
(1)—600 kcmil
Feed-Thru Lugs — Cannot Be Used in
Conjunction with TVSS or Subfeed
Breakers
See page 10-40 for unit space adders
and compatibility with other options.
225/250
190.
160.
(1)—#6 AWG-350
kcmil
400
490.
445.
(2)—250 kcmil
(1)—600 kcmil
600
720.
680.
(2)—250-500 kcmil
800
770.
—
(2)—600 kcmil
(1)—#6 AWG-350
kcmil
Split Bus
225/250
245.
180.
400
490.
445.
(2)—250 kcmil
(1)—600 kcmil
(2)—250-500 kcmil
600
720.
680.
800
1435.
1390.
(2)—600 kcmil
Bus mounted TVSS
. . . . . . . . . . . . See Section 9 for TPS1
Service Entrance Label
Type P3 Panelboards are factory labeled
suitable for use as service entrance
equipment when NEC requirements are met.
A panelboard cannot have more than six
main disconnects, unless it is a lighting and
appliance branch panelboard. Lighting and
appliance branch panelboards are limited to
two main disconnects.
Grounding of Panelboards
Ground Bars except for brazed to box are
shipped with the panel interior factory
mounted.
• Non-Insulated Equipment Ground Bar – STD
• Copper Non-Insulated Ground Bar. . . . . . 40.
• Al Insulated Equipment Ground Bar . . . . 40.
• Cu Insulated Equipment Ground Bar . . . . 75.
• Ground Bar Brazed to Box . . . . . . . . . . . 245.
(recommended for painted boxes)
Shunt Trip on Main or Branch
See breaker section for list price
adders. BL, BLH, HBL, BQD, ED4,
HED4, ED6, HED6, HHED6, QJ2,
QJ2H, QJH2, HQJ2H as branch only.
BL, BLH, HBL, ED2, ED4, HED4, ED6,
HED6, HHED6 uses 1" unit space for
shunt trip. All others may be used on
mains or subfeeds.
Branch and Main Breaker Accessories
See page 10-70 and Breaker Section
• Handle blocks
• Handle locks
• Aux. Contacts햲
• UVR햲
Increase capacity neutral up to 200%
Main Bus Amps
List Price Adder $
125
250
400
600
340.
530.
560.
625.
See page 10-40 for unit space adders
and compatibility with other options.
Copper MLO Only
Main Bus Amps
List Price Adder $
125
250
400
600
115.
190.
285.
285.
QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,
HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,
HJXD6
Time Clocks
Time clocks may be mounted in a 23"
enclosure to be cable connected to the
panel. Sangamo, Tork or Paragon time
clock can be supplied and mounted in
panelboard cabinet. Adds 12" to panel
height. Mounts in Sub-area.
Description
Time Clock (1 or 2-pole, single
or double throw contacts;
3-pole, single throw)
277V maximum with plain dial
Options—
Astronomical dial
An omitting device
Reserve power or carryover
Space and mounting
provisions only
List
Price $
1070.
210.
75.
2450.
540.
10
PANELBOARDS
햲
Accessories on 1" pole breakers (BL, BQD, ED) will take
unit space.
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-39
Panelboards
Type P3 Panelboard Standard Modifications
Selection
Option Combinations
Amps
Incoming
Subfeed
Lugs
Main Lug Only
—
Main Lugs w/Subfeed Lugs
•
Main Breaker (Horiz. FD)
—
Main Breaker (Vert. FD)
None Std.
Main Breaker (CFD)
None Std.
Main Lug Only
•
—
—
—
—
Main Breaker (JD)
None Std.
Main Breaker (CJD)
None Std
Main Lug Only
—
Main Breaker LD
—
Main Breaker CLD
—
Main Lug Only
—
250
400햳햴
600햳햴
FD햲
Subfeed
JD햲
Subfeed
FD햳
Subfeeds
200%
Neutral
Min. Box
Size (in.)
•
—
—
•
—
—
•
—
•
•
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
•
—
—
•
—
—
•
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
•
—
—
•
—
—
—
—
—
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
—
—
—
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
•
•
•
•
—
•
•
•
•
—
•
•
•
•
—
•
56
56
56
56
56
62
56
56
56
56
68
56
56
56
56
62
56
62
68
68
74
62
74
74
74
80
56
56
56
56
62
56
62
68
68
74
62
68
74
74
80
56
56
56
56
62
PANELBOARDS
10
800햳햴
Feed-thru
Lugs
햲
햳
햴
Subfed lugs are currently not offered as standard with
main circuit breakers.
Subfed lugs on panels above 400A are not standard.
200% neutral cannot be provided along with a 400A
subfeed breaker because the breaker blocks the 4th
lug site.
10-40
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Unit Space
(in.)
27
15
9
21
21
9
21
9
15
9
9
21
15
9
9
9
9
9
9
9
9
9
9
9
9
9
21
15
9
9
9
9
9
9
9
9
9
9
9
9
9
21
9
9
9
9
Panelboards
Type P3 Panelboard Connector Modifications
Selection
Compression Lugs
List Price $
3-Phase/ 3-Phase/ 1-Phase/ 1-Phase/
4-Wire
3-Wire
3-Wire 2-Wire
Style
Amp
Rating
Breaker
Type
Compression
Connectors
Box Height
Addition
MLO
250
400
N/A
N/A
75.
115.
75.
115.
65.
95.
N/A
N/A
FXD6, HFD6, CFD6
200.
265.
225.
150.
200.
180.
150.
200.
180.
115.
200.
180.
400
JD6, JXD6, HJD6,
CJD6, SJD6, SHJD6, SCJD6
LD6, LXD6, HLD6, CJD6,
SLD6, SHLD6, SCLD6
(2)#1/0 AWG - 500 kcmil Cu or Al
—
—
—
—
—
CFD6 requires an
additional 6.0" box height
6
105.
150.
600
800
250
(1)#6 AWG - 350 kcmil
(1) 250 - 500 kcmil or
(2)# 1/0 AWG - 250 kcmil
(2)#3/0 AWG - 500 kcmil
(2) 400-750 kcmil Cu only
(1)#6 AWG - 350 kcmil Cu or Al
305.
235.
235.
235.
(2)#2/0 AWG - 500 kcmil Cu or Al
6
305.
235.
235.
235.
Main
Breaker
600
Alternate Lugs
Style
Amp Rating
Breaker Type
Compression Connectors
Box Height Addition
List Price $
MLO
400
N/A
6
275.
Main Breaker
800
400
N/A
JD6, JXD6, HJD6, CJD6,
SJD6, SHJD6, SCJD6
(1) 250 - 750 kcmil or
(2)#3/0 AWG - 250 kcmil Cu or Al
(2) 600 kcmil
(1)#4/0 AWG - 750 kcmil Cu or Al
6
6
390.
305.
Enclosure Modifications
List Price Adder $
Panel
Width
24"
Description
NEMA 3R enclosure s
NEMA 3R/12 enclosure s
Gasket between trim
and box (Type 1)
1175.
1175.
890.
NEMA-4 For Type P3
Water Tight, Dust Tight, Steel
Enclosure
(consult plant for actual enclosure size)
Box Height
Inches
56
62
68
74
80
Enclosure Size
H
W
56
24
62
24
68
24
74
24
80
24
D
7.75
7.75
7.75
7.75
7.75
List
Price $
16260.
20545.
24835.
29340.
29350.
NEMA-4X For Type P3
Water Tight, Dust Tight and Corrosion Resistant
(consult plant for actual enclosure size)
Box Height
Inches
56
62
68
74
80
Enclosure - Stainless Steel
and Steel with Epoxy Coating
H
W
D
56
24
7.75
62
24
7.75
68
24
7.75
74
24
7.75
80
24
7.75
Enclosure - Fiberglass
Size (inches)
H
W
D
60
36
12
66
36
8
72
36
8
78
36
8
84
36
8
List
Price $
20265.
23710.
27435.
31155.
31610.
Remote Switch Modifications (see page 10-71)
Application For Remote Switch
Switch Type
920
911
10
LEN
Modification
Adds 12" to unit space
≤ 225A Adds 21" unit space >225 ≤400 Amps Add 10" to width and 8" DP
minimum and 24" to height
30A Adds 15" to unit space
>30A ≤ 100 Adds 12" to unit space
100 A ≤ 200 Adds 12" to unit space and 10" Dp. min.
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-41
Panelboards
Type P3 Panelboard Kits and Accessories
Selection
Standard Enclosures
Catalog Number
Box
Height
(in.)
56
Type 1
Standard Trim
Box
24WD56
Surface
P3S56
Flush
P3F56
Type 3R
24NRD56
Type 3R/12
24WPD56
62
24WD62
P3S62
P3F62
24NRD62
24WPD62
68
24WD68
P3S68
P3F68
24NRD68
24WPD68
74
24WD74
P3S74
P3F74
24NRD74
24WPD74
80
24WD80
P3S80
P3F80
24NRD80
24WPD80
Options For Type 1 Trims
Items must be ordered as manual line item on factory
Hinged trim – Add “H” suffix
Door-in-door – Add “D” suffix
Metal card holder – Add “M” suffix
Breaker Kits and Accessories
Kit Number
BBKB32
BBKNB32
BBKEB32
BBKED32
BBKQ2
Contents
Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware
Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware
Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware
Kit contains breaker support, inter-phase barriers, (3) A/C connectors, (1) B connector, hardware
Kit contains all connectors and cover plates necessary to mount both 2 and 3-pole breakers
3" empty space filler and hardware
6" empty space filler and hardware
Bonding strap and hardware
List Price $
85.00
90.00
113.00
90.00
350.00
45.00
51.00
23.00
PANELBOARDS
10
DFFP3
DFFP6
P3BK1
Description
BL/BQD 6-pole 3" branch breaker kit
NGB 6-pole 3" branch breaker kit
NEB/HEB 6-pole 3" branch breaker kit
ED 6-pole 3" branch breaker kit
Branch breaker kit for 2 and 3-pole
QJ twin mount
Deadfront filler 3"
Deadfront filler 6"
P3 bonding kit
10-42
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P3 Panelboards
Dimensions
Type 1 Box
Box is symmetrical
Box To Wall
Mounting Holes
2 in.
[ 51 ]
.31 in.
[8]
7.625 in.
[ 199 ]
Mounting
Dimple
Interior To Box
Mounting
Stubs
햲
56 in. 62 in. 68 in.
[ 1422 ] [ 1575 ] [ 1727 ]
74 in. 80 in.
[ 1880 ] [ 2032 ]
7.625 in.
[ 199 ]
12.63 in.
[ 321 ]
15 in.
[ 381 ]
7.75 in.
[ 197 ]
2 in.
[ 51 ]
햲
24 in.
[610]
햲
Type 3R and 3R/12 Box
9.5 in.
[ 241 ]
.50 in.
[ 13 ]
2 in.
[ 51 ]
Mounting
Bracket
56 in. 62 in. 68 in.
햲
[ 1422 ] [ 1575 ] [ 1727 ]
74 in. 80 in.
[ 1880 ] [ 2032 ]
2 in.
[ 51 ]
2 in.
[ 51 ]
1 in.
[25]
25.5 in.
[ 648 ]
햲
햲 Dimensions
are interior of the box. Add 5/8" to width for absolute
dimension. Add 1/8" to height for absolute dimension.
Dimensions shown in inches and millimeters [ ].
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-43
PANELBOARDS
27.5 in.
[ 699 ]
7.75 in.
[ 146 ]
10
24 in. 햲
[ 610 ]
Panelboards
Type P4 Panelboards
Features
The P4 panel is a medium sized footprint
distribution panel to fit a large number of
applications that require more or larger
branch devices and higher amp ratings
than the lighting panel class offer. Even
with the increased capacity, this panel is
a space saver with its 32" width and 10"
depth. The P4 panel offers a wide array
of factory-assembled options and has
the ability to mix breaker frames in unit
space up to 800 amps and fusible
switches up to 200 amps. Bussing
options for the P4 vary from the standard
temperature rated aluminum to
temperature rated copper and 750A/Si
aluminum and 1000A/Si copper designs.
All aluminum bussing in the P4 panel is
tin-plated as a standard. Silver-plated is
offered as the default for copper bus and
tin as an option. Integrated time clocks,
bus mounted contactors as mains or
submains, split bus and subfeed lugs (up
to 600 amp) are just a few of the options
of this flexible panel.
The 4 panel configurations defined by
the unit space allowed for a given
amperage, main device and box height.
The P4 panel starts with a 60" high box.
All of the branch devices are unit space
mounted. Breakers and switches can be
mixed and matched to meet customer
requirements.
General
Main Lug / Main Breaker / Main
Switch
Enclosure – Standard Type 1 enclosure
is 32" wide x 10" deep. X Box Height is
determined by main device and unit
space. See charts for box height.
Voltage – 600V AC max.
250V DC max.
Amperage – 400-800 amp main breaker
(check with factory on availability of 800
amp), 400-1200 amp MLO, 100-200 amp
main switch.
Short Circuit Rating – 200 KAIC max.
symmetrical or equal to the lowest rated
device installed unless a series rating is
indicated. Panels with subfeed or
feed-thru lugs without a main device,
circuit breaker or fusible unit, are limited
to a three-cycle rating. The three-cycle
rating for the P4 panel is limited to 42
KAIC. Note that the main device may
be mounted remote from the panel.
Bussing – The P4 panel has more
options to meet market requirements.
The standard bussing is temperature
rated aluminum. The rating is per the
requirements of UL 67 – the standard for
panelboards. All aluminum bussing is
tin-plated. Optional bussing for the P4
panel is: 750 A/Si aluminum, temperature
rated copper, and 1000 A/Si copper.
The copper bus option for this panel
is silver-plated.
Enclosure Selection 햲
Enclosure Dimension in Inches (mm)
Available Circuit Space in Inches (mm)
Dimension “C”
H
Main Lug
Main Breaker
400 / 800A
400 / 800A
100 / 200A
30 (762)
45 (1143)
60 (1524)
21.25 (540)
36.25 (921)
51.25 (1302)
20 (508)
35 (889)
50 (1270)
W
D
Type 1, 3R/12
60 (1524)
75 (1905)
90 (2286)
32 (813)
32 (813)
32 (813)
10 (254)
10 (254)
10 (254)
Main Switch
Main Breaker Unit Space Dimensions
PANELBOARDS
10
Dimensions in Inches (mm)
Ampere
Rating
Breaker
Type
A
400
400–600
800
JXD6, JD6, HJD6
LXD6, LD6, HLD6, SJD6, SHJD6, SLD6, SHLD6
LMD6, LMXD6
10.42 (265)
10.42 (265)
10.00 (265)
Neutral
B
13.125 (333)
Main Switch Connectors
Ampere
Rating
100
200
햲
Connectors suitable for
Copper or Aluminum
(1) #10-#1/0 AWG (Cu or Al)
(1) #6 AWG-300 kcmil
Standard trim is four piece without door. Surface or flush one piece trim is available for
32 in. (813 mm) wide circuit breaker panel.
10-44
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Weight – Approximate
Total panelboard weight when filled
with a normal quantity
of breakers and accessories is about 8
lbs. (1 kg) per inch
(54g per mm) of box height.
Main Lugs ���
Ampere Rating
400
(1) - #3/0 AWG-500 kcmil
(2) - #3/0 AWG-250 kcmil
(2) - #3/0 AWG-500 kcmil
(3) - #3/0 AWG-500 kcmil
(4) - #3/0 AWG-500 kcmil
(4) - #3/0 AWG-500 kcmil
600
800
1000
1200
햲
Connectors Suitable for
Copper or Aluminum
Alternate lugs for 750 kcmil cable are available, but
result in significant loss of branch unit mounting space.
Consult Siemens.
Gauge Steel of Boxes
Fronts, Surface and Flush
Dimensions in
inches (mm)
Gauge Steel
Width
Height
Box
Fronts
32"
(813)
60 - 75 - 90
(1524, 1905,
2286)
#16���
#14 (1 piece trim)
14 Ga (4 piece trim)
햲
Box has 16 gauge side panels and 12 gauge back
support.
Panelboards
Type P4 Panelboards
Dimensions
Main Lugs Only Wire Bending Space
Lugs
Standard
Oversize
Crimp
Standard
w/Subfeed
Standard
w/Feed-thru
Dimensions in inches (mm)
Main Lug
400A
600A
800A
A
B
C
16.500
(419)
16.500
(419)
19.187
(487)
16.750
(425)
16.500
(419)
16.750
(419)
21.750
(552)
18.250
(464)
15.969
(406)
16.750
(419)
1000A
D
1200A
E
15.969
(406)
25.969
(660)
18.687
(475)
—
15.969
(406)
25.969
(660)
18.250
(464)
—
15.969
(406)
25.969
(660)
18.250
(464)
—
—
—
—
Neutral
400-600A
F
800-1200A
G
13.125
(333)
18.125
(460)
15.937
(405)
13.125
(333)
13.125
(333)
13.125
(333)
23.125
(587)
15.937
(405)
13.125
(333)
13.125
(333)
Main Lugs Only Unit Space
Branch Switch Unit Space
Mounting Height in inches (mm)
Ampere
Rating
Number
of Poles
Twin
Mounted
30-30
30-30
30-60
60-60
60-100
100-100
200-200
200
200
30-30
30-60
60-60
60-100
100-100
200-200
100
200
2,
2,
2,
2,
2,
2,
3
2
3
2,
2,
2,
2,
2,
3
2,
2,
2.50 (64)
5.00 (127)
5.00 (127)
5.00 (127)
7.50 (191)
7.50 (191)
10.00 (254)
—
—
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
10.00 (254)
—
—
3
3
3
3
3
3
3
3
3
3
3
3
3
Single
Mounted
—
—
—
—
—
—
—
7.50
10.00
—
—
—
—
—
—
7.50
10.00
(191)
(254)
(191)
(254)
AC
Voltage
Cables Per
Connector
Connectors Suitable for
Copper or Aluminum
240
240
240
240
240
240
240
240
240
600
600
600
600
600
600
600
600
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
#14 - #8 AWG (Cu Only)
#14 - #4 AWG
#14 - #4 AWG
#14 - #4 AWG
#10 - #1/0 AWG
#10 - #1/0 AWG
#6 AWG - 350 kcmil
#6 AWG - 350 kcmil
#6 AWG - 350 kcmil
#14 - #8 AWG
#14 - #4 AWG
#14 - #4 AWG
#10-#1/0 AWG
#10-#1/0 AWG
#6 AWG - 250 kcmil
#10-#1/0 AWG
#6 AWG - 250 kcmil
10
PANELBOARDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-45
Panelboards
Type P4 Panelboards
Dimensions
Branch Breaker Side Gutter Inches (mm)
Reference
Letter
Panel Width 32 in.
Inches (mm)
A
11.000
7.000
6.500
5.250
4.615
8.769
12.500
8.250
10.000
7.000
5.000
7.500
10.000
10.500
7.750
(279)
(178)
(146)
(133)
(177)
(223)
(265)
(210)
(254)
(178)
(127)
(191)
(254)
(267)
(197)
B
C
D
F
G
H
I
J
K
L
M
N
N
O
P
PANELBOARDS
10
A
B
C
D
F
G
H
I
J
K
L
M
N
O
P
BL, BLH, HBL, BQD, BLE BL, BLH, HBL, BQD, BLE
BLEH, BLR, BLF, BLHF
BLEH, BLR, BLF, BLHF
BAF, BAHF, BGL
BAF, BAHF, BGL
ED4, ED6
ED4, ED6
HED4, HHED6
HED4, HHED6
QJ2, QJH2
QJ2, QJH2
QJ2H, HQJ2H
QJ2H, HQJ2H
FXD6, FD6
FXD6, FD6
HFD6
HFD6
CED6
CED6
CFD6
JXD6, JD6, LXD6, LD6, SLD6
SJD6, SHJD6, HLD6, SHLD6
CJD6, SCJD6, CLD6, SCLD6
30–60A 5" switch
30–60A 5" switch
30–60A 7.5" switch
30–60A 7.5" switch
100–200A switch
100–200A switch
100–200A switch
LMD6, LMXD6, HLMD6, HLMXD6
NMG, HMG, LMG
NGB
NGB
NEB, HEB
NEB, HEB
10-46
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
A
B
C
D
F
G
H
I
J
K
L
M
N
N
O
P
Panelboards
Power and Distribution
Selection
Type P4
Shown with Standard Mains, Top Fed
Panels are top feed, surface mounted.
and Surface Trim
For bottom feed, change “T” in position
12 to “B”. For flush mounting,
Catalog number is for aluminum main
change “S” in position 13 to “F”.
bus. For optional copper main bus
change “A” in position 11 to “C”.
Main Lugs Only — shown with aluminum bus, top fed, and surface trims.
Maximum
Panel Amps
400
600
800
1000
1200
Maximum
Panel Amps
400
600
800
1000
1200
Unit
Space
(inches)
30
45
60
30
45
60
30
45
60
30
45
60
30
45
60
208Y/120V
Unit
Space
(inches)
30
45
60
30
45
60
30
45
60
30
45
60
30
45
60
240V
Replace fifth and sixth position
in panelboard catalog number,
with alternate main breaker code.
Use price adders from main breaker
section table. Horizontally mounted.
240/120V
3-Phase, 4-Wire
Catalog Number
P4C60ML400ATS
P4C75ML400ATS
P4C90ML400ATS
P4C60ML600ATS
P4C75ML600ATS
P4C90ML600ATS
P4C60ML800ATS
P4C75ML800ATS
P4C90ML800ATS
P4C60ML101ATS
P4C75ML101ATS
P4C90ML101ATS
P4C60ML120ATS
P4C75ML120ATS
P4C90ML120ATS
List
Price $
1220.00
1270.00
1360.00
1570.00
1660.00
1750.00
1910.00
2020.00
2120.00
2230.00
2350.00
2460.00
2510.00
2650.00
2800.00
3-Phase, 4-Wire
Catalog Number
P4B60ML400ATS
P4B75ML400ATS
P4B90ML400ATS
P4B60ML600ATS
P4B75ML600ATS
P4B90ML600ATS
P4B60ML800ATS
P4B75ML800ATS
P4B90ML800ATS
P4B60ML101ATS
P4B75ML101ATS
P4B90ML101ATS
P4B60ML120ATS
P4B75ML120ATS
P4B90ML120ATS
120/240V or 250 Vdc Max
List
Price $
1220.00
1270.00
1360.00
1570.00
1660.00
1750.00
1910.00
2020.00
2120.00
2230.00
2350.00
2460.00
2510.00
2650.00
2800.00
List
Price $
1010.00
1060.00
1110.00
1270.00
1360.00
1410.00
1510.00
1590.00
1690.00
1760.00
1870.00
1960.00
2020.00
2130.00
2260.00
3-Phase, 4-Wire
Catalog Number
P4E60ML400ATS
P4E75ML400ATS
P4E90ML400ATS
P4E60ML600ATS
P4E75ML600ATS
P4E90ML600ATS
P4E60ML800ATS
P4E75ML800ATS
P4E90ML800ATS
P4E60ML101ATS
P4E75ML101ATS
P4E90ML101ATS
P4E60ML120ATS
P4E75ML120ATS
P4E90ML120ATS
List
Price $
1220.00
1270.00
1360.00
1570.00
1660.00
1750.00
1910.00
2020.00
2120.00
2230.00
2350.00
2460.00
2510.00
2650.00
2800.00
480V 햲
480Y/277V
3-Phase, 3-Wire
Catalog Number
P4D60ML400ATS
P4D75ML400ATS
P4D90ML400ATS
P4D60ML600ATS
P4D75ML600ATS
P4D90ML600ATS
P4D60ML800ATS
P4D75ML800ATS
P4D90ML800ATS
P4D60ML101ATS
P4D75ML101ATS
P4D90ML101ATS
P4D60ML120ATS
P4D75ML120ATS
P4D90ML120ATS
1-Phase, 3-Wire
Catalog Number
P4A60ML400ATS
P4A75ML400ATS
P4A90ML400ATS
P4A60ML600ATS
P4A75ML600ATS
P4A90ML600ATS
P4A60ML800ATS
P4A75ML800ATS
P4A90ML800ATS
P4A60ML101ATS
P4A75ML101ATS
P4A90ML101ATS
P4A60ML120ATS
P4A75ML120ATS
P4A90ML120ATS
List
Price $
1200.00
1270.00
1360.00
1570.00
1660.00
1750.00
1910.00
2020.00
2120.00
2230.00
2350.00
2460.00
2510.00
2650.00
2800.00
3-Phase, 3-Wire
Catalog Number
P4F60ML400ATS
P4F75ML400ATS
P4F90ML400ATS
P4F60ML600ATS
P4F75ML600ATS
P4F90ML600ATS
P4F60ML800ATS
P4F75ML800ATS
P4F90ML800ATS
P4F60ML101ATS
P4F75ML101ATS
P4F90ML101ATS
P4F60ML120ATS
P4F75ML120ATS
P4F90ML120ATS
List
Price $
1010.00
1060.00
1110.00
1270.00
1360.00
1410.00
1510.00
1590.00
1690.00
1760.00
1870.00
1960.00
2020.00
2130.00
2260.00
Main Circuit Breaker — shown with standard mains, aluminum bus, top fed, and surface trims.
Maximum
Panel Amps
400
600
800
400
800
List
Price $
4000.00
4210.00
4420.00
6250.00
6600.00
6950.00
8020.00
8480.00
8930.00
240V
3-Phase, 4-Wire
Catalog Number
P4B60JX400ATS
P4B75JX400ATS
P4B90JX400ATS
P4B60LX600ATS
P4B75LX600ATS
P4B90LX600ATS
P4B60M1800ATS
P4B75M1800ATS
P4B90M1800ATS
120/240V or 250 Vdc Max
List
Price $
4000.00
4210.00
4420.00
6250.00
6600.00
6950.00
8020.00
8480.00
8930.00
List
Price $
3820.00
4010.00
4220.00
6000.00
6310.00
6650.00
8020.00
8480.00
8930.00
3-Phase, 4-Wire
Catalog Number
P4E60JX400ATS
P4E75JX400ATS
P4E90JX400ATS
P4E60LX600ATS
P4E75LX600ATS
P4E90LX600ATS
P4E60M1800ATS
P4E75M1800ATS
P4E90M1800ATS
1-Phase, 3-Wire
Catalog Number
P4A60JX400ATS
P4A75JX400ATS
P4A90JX400ATS
P4A60LX600ATS
P4A75LX600ATS
P4A90LX600ATS
P4A60M1800ATS
P4A75M1800ATS
P4A90M1800ATS
List
Price $
3450.00
3630.00
3820.00
5250.00
5550.00
5840.00
6710.00
7160.00
7610.00
480V 햲
480Y/277V
3-Phase, 3-Wire
Catalog Number
P4D60JX400ATS
P4D75JX400ATS
P4D90JX400ATS
P4D60LX600ATS
P4D75LX600ATS
P4D90LX600ATS
P4D60M1800ATS
P4D75M1800ATS
P4D90M1800ATS
Note: For 600V application, change “F” in position 3 to “G”.
See alternate main breaker table on page 10-48 for
600V rated mains. Change position 5 and 6 and add
Discount Schedule PBSB
240/120V
3-Phase, 4-Wire
Catalog Number
P4C60JX400ATS
P4C75JX400ATS
P4C90JX400ATS
P4C60LX600ATS
P4C75LX600ATS
P4C90LX600ATS
P4C60M1800ATS
P4C75M1800ATS
P4C90M1800ATS
List
Price $
4120.00
4340.00
4560.00
6250.00
6600.00
6950.00
8020.00
8480.00
8930.00
3-Phase, 3-Wire
Catalog Number
P4F60JX400ATS
P4F75JX400ATS
P4F90JX400ATS
P4F60LX600ATS
P4F75LX600ATS
P4F90LX600ATS
P4F60M1800ATS
P4F75M1800ATS
P4F90M1800ATS
List
Price $
3940.00
4140.00
4350.00
6000.00
6310.00
6650.00
8020.00
8480.00
8930.00
price from table. Price only 600V rated branch
breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-47
PANELBOARDS
600
Unit
Space
(inches)
21.25
36.25
51.25
21.25
36.25
51.25
21.25
36.25
51.25
208Y/120V
10
Maximum
Panel Amps
Unit
Space
(inches)
21.25
36.25
51.25
21.25
36.25
51.25
21.25
36.25
51.25
Panelboards
Power and Distribution
Selection
Main Fusible Switch (fuses not included)
Maximum
Panel
Ampere Rating
200
Maximum
Panel
Ampere Rating
200
Unit
Space
(inches)
20
35
20
35
Unit
Space
(inches)
20
35
20
35
208Y/120V
240/120V
120/240V
3-Phase, 4-Wire
Catalog Number
P4C60MS100ATS
P4C75MS100ATS
P4C60MS200ATS
P4C75MS200ATS
240V
List
Price $
1670.00
1770.00
1740.00
1840.00
3-Phase, 4-Wire
Catalog Number
P4B60MS100ATS
P4B75MS100ATS
P4B60MS200ATS
P4B75MS200ATS
480Y/277V
List
Price $
1670.00
1770.00
1740.00
1840.00
1-Phase, 3-Wire
Catalog Number
P4A60MS100ATS
P4A75MS100ATS
P4A60MS200ATS
P4A75MS200ATS
480V햲
List
Price $
1400.00
1480.00
1440.00
1530.00
3-Phase, 3-Wire
Catalog Number
P4D60MS100ATS
P4D75MS100ATS
P4D60MS200ATS
P4D75MS200ATS
List
Price $
1590.00
1610.00
1590.00
1690.00
3-Phase, 4-Wire
Catalog Number
P4E60MS100ATS
P4E75MS100ATS
P4E60MS200ATS
P4E75MS200ATS
List
Price $
1930.00
2050.00
2000.00
2110.00
3-Phase, 3-Wire
Catalog Number
P4F60MS100ATS
P4F75MS100ATS
P4F60MS200ATS
P4F75MS200ATS
List
Price $
1790.00
1890.00
1860.00
1950.00
Type P4
Alternate Main Breaker Selection
Ampere
Rating
400
600
800
Catalog
Number 햳
JX
J6
HJ
CJ
SJ
SH
SC
LX
L6
HL
CL
SL
S6
C6
M1
M2
M3
LM
L1
HK
HJ
Maximum Interrupting
Rating (KA)
240V
65
65
100
200
65
100
200
65
65
100
200
65
100
200
65
100
200
65
65
100
100
480V
35
35
65
150
35
65
150
35
35
65
150
35
65
150
35
65
100
50
50
65
65
600V
25
25
35
150
25
35
100
25
25
35
100
25
35
100
25
50
65
25
25
50
50
List
Price $
STD
510.
1630.
2260.
1130.
2370.
3020.
STD
120.
880.
3390.
730.
2430.
4640.
STD
1130.
3260.
590.
590.
1870.
1870.
Available Trip Values
200, 225, 250, 300, 350,
200, 225, 250, 300, 350,
200, 225, 250, 300, 350,
200, 225, 250, 300, 350,
200, 300, 400
200, 300, 400
200, 300, 400
450, 500, 600
250, 300, 350, 400, 450,
250, 300, 350, 400, 450,
450, 500, 600
300, 400, 500, 600
300, 400, 500, 600
300, 400, 500, 600
600, 700, 800
600, 700, 800
600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
400
400
400
400
500, 600
500, 600
PANELBOARDS
10
800
Breaker
Type
JXD6
JD6
HJD6
CJD6
SJD6
SHJD6
SHJD6H
LXD6
LD6
HLD6
CLD6
SLD6
SHLD6
SCLD6
NMX
HMX
LMX
LMXD6
LMD6
HLMXD6
HLMD6
For inches / millimeters conversion, see Application Data
section.
햲
For 600V applications, change “F” in position 3 to “G”.
Price only 600V branch device.
10-48
햳
Space price covers cost of housing frame plate with
blank cover plate. Provision price includes all necessary
mounting hardware, less circuit breaker, and includes
housing frame cover plate with breaker handle opening.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Power and Distribution
Selection
Branch Breaker Selection
Breaker
Type
BL
BL (HID)
BAF
BAFH
BLF (GFCI)
BLE (EQ GFI)
BLEH
BGL (SWN)
BL (240V)R
BLH (120V)
HBL
BLHF (GFCI)
BQD
NGB
NEB
HEB
ED4
HED4
HHED6
CED6
Mounting Height Maximum Interrupting Rating
(inches)
(KA)
Twin
Single
3.75
—
3.75
—
3.75
—
3.75
3.75
3.75
3.75
3.75
3.75
3.75
—
5
5
5
5
—
5
5
—
—
—
—
—
—
—
—
—
—
—
—
5
5
5
5
5
5
5
5
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
120V 120/240V 240V 277V 480Y/277 480V 600V 250V DC
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
10
10
— —
—
—
— —
22
22
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
10
— —
—
—
— —
—
—
10 —
—
—
— —
—
—
10 —
—
—
— —
—
22
— —
—
—
— —
—
22
— —
—
—
— —
—
65
65 —
—
—
— —
—
65
65 —
—
—
— —
—
22
— —
—
—
— —
—
—
65 —
14
—
— 14
—
—
65 —
14
—
— 14
100
100
100 25
25
25
— 14
100
100
100 25
25
25
— 14
100
100
100 25
25
25
— 14
85
85
85 35
35
35
— 35
85
85
85 35
35
35
— 35
85
85
85 35
35
35
— 35
100
100
100 65
65
65
— 42
100
100
100 65
65
65
— 42
100
100
100 65
65
65
— 42
—
—
65 —
18
18
— 30
—
—
65 —
18
18
— 30
—
—
65 —
18
18
— 30
25
25
— 30
—
—
100
—
—
100 —
25
42
— 30
—
—
100 —
42
42
— 30
—
—
100 —
—
65
25 —
—
—
100 —
—
65
25 —
—
—
100 —
—
65
25 —
—
—
200 —
—
200
— 30
—
—
200 —
—
200
— 30
—
—
10 —
—
—
— —
—
—
42 —
—
—
— —
—
—
65 —
—
35
— 30
—
—
100 —
—
65
— 30
—
—
200 —
—
200
— 30
—
—
65 —
—
35
— 30
—
—
100 —
—
65
— 30
—
—
200 —
—
200
— 30
—
—
65 —
—
—
— 30
—
—
— —
—
35
25 30
—
—
100 —
—
65
35 30
—
—
200 —
—
150 100 30
—
—
65 —
—
35
25 —
—
—
100 —
—
65
35 —
—
—
65 —
—
35
25 30
—
—
100 —
—
65
35 30
—
—
200 —
—
150 100 30
—
—
65 —
—
35
25 —
—
—
100 —
—
65
35 —
500, 600, 700, 800
—
5060.
6520.— 210.
1360.
—
8.75
—
—
65
—
—
50
25
30
500, 600, 700, 800
—
6510.
8060.— 210.
1360.
—
8.75
—
—
100
—
—
65
50
30
600, 700, 800
600, 700, 800
600, 700, 800
— 4590. 5930.
— 5910. 7320.
— 15430. 17690.
1720.
1720.
1720.
—
—
—
8.75
8.75
8.75
—
—
—
—
—
—
65
100
200
—
—
—
—
—
—
35
65
100
25
50
65
30
30
30
Space price covers cost of housing frame plate with
blank cover plate. Provision price includes all necessary
mounting hardware, less circuit breaker, and includes
housing frame cover plate with breaker handle
opening.
1 to 6 poles may be mounted in 3.75" of unit space.
Accessories such as shunt trips on three pole breakers
require 6.25" of unit space.
Discount Schedule PBSB
HED4
1-pole 15–30A = 65,000 IR
35–100A = 25,000 IR
For 600V applications, ED6 available at same list price.
Ground fault not available on branch Sensitrip
breakers.
Integral
ground fault not available for 3-phase,
4-wire systems. Only 3-phase, 3-wire from 3-phase,
4-wire systems.
HED 4 3-Pole=42,000 IR
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-49
PANELBOARDS
210.
210.
210.
10
QJ2
QJH2
FXD6
HFD6
CFD6
FXD6
HFD6
CFD6
JXD2
JXD6
HJD6
CJD6
SJD6
SHJD6
LXD6
HLD6
CLD6
SLD6
SHLD6
LMD6,
LMXD6
HLMD6,
HLMXD6
NMX
HMX
LMX
Available
Provisions
List Price Installed $ Space for
Trip Value
Ampere Ratings
1-Pole 2-Pole 3-Pole $
Future $
15–60
100.
170.
250.
35.
55.
70
160.
190.
290.
35.
55.
80, 90, 100
—
230.
330.
35.
55.
15, 20, 30
110.
190.
—
35.
55.
15, 20
220.
380.
—
35.
55.
15, 20
280.
450.
—
35.
55.
15, 20, 30
220.
250.
—
35.
55.
40, 50, 60
—
290.
—
35.
55.
15, 20, 30
200.
250.— —
35.
55.
15, 20, 30,
420.
—
—
35.
55.
40, 50, 60
—
530.— —
35.
55.
15, 20, 30
—
180.
230.
35.
55.
15, 20, 30, 40, 50, 60
—
210.
—
35.
55.
70, 80, 90, 100
—
310.
—
35.
55.
15, 20, 30, 40, 50, 60, 70
130.
250.
340.
35.
55.
80, 90, 100
—
280.
480.
35.
55.
15, 20, 30, 40, 50, 60
130.
320.
400.
35.
55.
70, 80, 90, 100
—
320.
540.
35.
55.
15, 20, 30,
250.
340.
—
35.
55.
15, 20, 30, 40, 50, 60
130.
320.
400.
35.
55.
70, 80, 90, 100
200.
420.
540.
35.
55.
15—60
140.
460.
510.
35.
55.
70—100
210.
500.
660.
35.
55.
110—125
=—
820. 1190.
35.
55.
15—60
270.
450.
590.
75.
110.
70—100
300.
510.
670.
75.
110.
110—125
730. 1290. 1440.
75.
110.
15—60
390.
690.
910.
75.
110.
70—100
430.
760.
990.
75.
110.
110—125
1220. 2150. 2280.
75.
110.
15, 20, 30, 40, 50, 60
175.
570.
630.
75.
110.
70, 80, 90, 100
260.
620.
820.
75.
110.
110, 125
— 1010. 1470.
75.
110.
15, 20, 30, 40, 50, 60
490.
850. 1120.
75.
110.
70, 80, 90, 100
490.
950. 1220.
75.
110.
110, 125
— 2660. 2830.
75.
110.
15, 20, 30, 40, 50, 60
—
940. 1250.
75.
110.
70, 80, 90, 100
— 1060. 1360.
75.
110.
110, 125
— 2970. 3130.
75.
110.
15, 20, 30, 40, 50, 60, 70, 80, 90, 100
— 1970. 2410.
75.
110.
110, 125
— 3160. 3980.
75.
110.
60, 70, 80, 90, 100, 125, 150, 175, 200, 225
—
720.
940.
75.
150.
60, 70, 80, 90, 100, 125, 150, 175, 200, 225
—
740. 1250.
75.
150.
70, 80, 90, 100, 125, 150, 175, 200, 225
— 1250. 1590.
75.
320.
70, 80, 90, 100, 125, 150, 175, 200, 225
— 2750. 3350.
75.
320.
70, 80, 90, 100, 125, 150, 175, 200, 225
— 3500. 4470.
75.
320.
250
— 2190. 2700.
75.
320.
250
— 3940. 4240.
75.
320.
250
— 4590. 5580.
75.
320.
200, 225, 250, 300, 350, 400
— 2150. 2350. 130.
350.
200, 225, 250, 300, 350, 400
— 2230. 2750. 130.
350.
200, 225, 250, 300, 350, 400
— 4380. 4610. 130.
350.
200, 225, 250, 300, 350, 400
— 4910. 6310. 130.
350.
200, 225, 250, 300, 350, 400
—
— 5960. 130.
350.
200, 300, 400
—
— 6610. 130.
350.
450, 500, 600
— 3540. 4580. 140.
640.
250, 300, 350, 400, 450, 500, 600
— 4280. 5360. 140.
640.
450, 500, 600
— 7950. 9720. 140.
640.
300, 400, 500, 600
—
— 6600. 140.
640.
300, 400, 500, 600
—
— 6680. 140.
640.
Panelboards
Power and Distribution
Selection
Branch Switch Selection
List Price $
3-Pole
2-Pole
Ampere
Rating
Space
Only $
240V — Twin Mounted
30-30
30-30
30-60
60-60
60-100
100-100
200-200
965.
1020.
1020.
1020.
1315.
1410.
2510.
815.
870.
900.
900.
1050.
1050.
—
Provisions for Mounting
Future $
Hgt (inches)
NEC Fuse Clips
105.
170.
170.
170.
225.
225.
275.
NEC Fuse Clips
240V — Single Mounted
30
60
100
200
200
830.
830.
1080.
1355.
—
—
—
—
—
1335.
21⁄2
5
5
5
71⁄2
71⁄2
10
140.
225.
225.
225.
255.
255.
435.
260.
260.
225.
225.
275.
280.
280.
295.
295.
435.
71⁄2
71⁄2
71⁄2
10
71⁄2
Type S4/P4/SPP (10" deep) and F1/P4/FPP
(10" deep)
Ampere
Rating
List Price $
3-Pole
2-Pole
Space
Only $
600V — Twin Mounted
30-30
30-60
60-60
60-100
100-100
200-200
1400.
1400.
1400.
1525.
1610.
2895.
—
—
—
—
—
—
Provisions for Mounting
Future $
Hgt (inches)
NEC Fuse Clips
225.
225.
225.
225.
225.
275.
295.
295.
295.
295.
295.
435.
225.
275.
295.
445.
NEC Fuse Clips
600V — Single Mounted
100
200
1070.
1465.
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
10
—
—
71⁄2
10
Blank Plates — Circuit
Breaker and Vacu-Break
Connecting Strap Kits — w/o Circuit Breaker
For use with Sentron SPP Shallow Depth or Type S4 power panels
Breaker
Type
Mounting
Type
Unit
Height
(inches)
BL/BQD
Twin
3.75
SBL
902.00
NGB
Twin
3.75
SNB
NEB, HEB
Twin
3.75
ED
Twin
CED6
For use with Sentron SPP and Type S4 power panels
Catalog
Number
List
Price $
1.25
6FPB01
196.00
2.5
6FPB02
224.00
902.00
3.75
6FPB03
224.00
SEB
902.00
5.0
6FPB05
224.00
3.75
SE6
902.00
10.0
6FPB10
302.00
Single
3.75
SCE
902.00
QJ
Twin
5
SQJ
1622.00
FD6
Twin
5
SF6
1622.00
CFD6
Single
5
SCF
1622.00
JXD2,6
Single
8.75
SJ1
2254.00
SJD6
Single
8.75
SSJ1
2254.00
Catalog
Number
List
Price $
CJD6
Single
8.75
SCJ
2254.00
SCJD6
Single
8.75
SSCJ
2254.00
LD6
Single
8.75
SL6
2668.00
SLD6
Single
8.75
SSL6
2668.00
CLD6
Single
8.75
SCL
2668.00
SCLD6
Single
8.75
SSCL
2668.00
NM, HM, LM,
SNM, SHM
Single
8.75
MG1
3317.00
Height
(inches)
Filler Plates
For use with Sentron SPP and S4 power panels
Breaker
Type
BL, BLH, HBL
ED2, ED4, ED6
HED4, HHED6
Filler
Plate
Catalog
Number
List
Price $
QF3
2.80 per pole
Note: When a front filler plate is not completely filled with breakers, the openings in the unused
space must be closed with filler plates selected from this table.
Connecting Strap Kits
Fusible
For use with Sentron Shallow Depth or Type
SPP/FPP/F1/P4 power panels
10
PANELBOARDS
10" Deep Box
Unit
Height
(inches)
Catalog
Number
30–30
2.5
F602
46.00
30–60
5, 7.5
F657
46.00
30–60
5, 7.5
F657
46.00
60–60
5, 7.5
F657
46.00
60–100
5, 7.5
F657
46.00
100–100
5, 7.5
F657
46.00
100
7.5
F657
46.00
200
7.5
F657
46.00
200
10
F671
70.00
200–200
10
F672
430.00
Ampere
Rating
List
Price $
For inches / millimeters conversion, see Application Data section.
Space
price covers cost of housing frame plate without
breaker handle opening. Provisions include all
necessary mounting hardware less breakers.
10-50
For
Class J, R or T fuse clip prices, refer to page 10-51.
For Class J fuse clips price 600V, 71⁄2" high units.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEC
fuse clips only.
stock item.
Normal
Discount Schedule PBSB
Sentron® Panelboards
Modifications and Additions
Selection
Type P4
When required, special constructions or
additions to standard panelboards may be
specified for all factory-assembled Power
and Distribution Panelboards. Below
and on the next page are listed many of
those available for Type S4/F1/P4
panelboards. In no case do these apply
to Narrow (Column) Width Lighting
Panelboards or Unassembled
Panelboards.
6. Subfeed or Feed-Thru Lugs
(One Set Per Panel)
Subfeed Double Lugs
(Main Lug Panels)
Unit Space
(Additional Inches)
Ampere List Price $
Rating
3-Phase 1-Phase MLO
400
600
800
1200
1. Type 3R / 12
Description
List
Price $
32"
Panelboard Construction: Single Door
(Complete enclosure does not
require a trim)
1175.
Description
List
Price $
All
Panels
400
600
800
1200
4. Devices Mounted on Gutter Cover —
Includes Device, Mounting —
Wired or Unwired See page 10–71
5. Increased Capacity Neutral
Ampere Rating
Phase
Neutral
List
Price $
400
400
600
800
600
800
1200
1200
540.
560.
795.
850.
245.
455.
NA
NA
—
—
NA
NA
245.
455.
615.
765.
245.
455.
615.
765.
10
10
17.5
17.5
Ampere
Rating
List Price $ List Price $ List Price $
Class J
Class R
Class T
30
60
100
200
55.
55.
85.
85.
55.
55.
85.
85.
N/A
N/A
180.
285.
14. Spanner Wrenches
(for Vacu-Break Switches)
Ampere Rating
List Price $
30-250
460.
15. Remote Control Switches
Switch Type
920
7. Split Bus (Unit Space +1.25")
911
List Price $
3. Miscellaneous Accessories
50.
70.
245.
455.
NA
NA
Feed-Thru Lugs
2. Painted Finish See page 10–71
Nameplate — laminated, engraved
Tamper-Resistant Screws — per panel
13. Fuse Clip Provisions
(Add to 250 Volts or 600 Volts Unit
Prices Per Switch)
Phases
400A
600A
800A
1200A
1
3
350.
415.
415.
455.
570.
655.
700.
740.
8. MLO Compression Lugs —
Aluminum Lugs for Use With
Copper or Aluminum Cable see
page 10-52.
9. Compression Lugs For
Circuit Breakers see page Section 6.
10. Circuit Breaker Main — With
Vacu-Break Branch Panelboards
Price appropriate main breaker panel,
then add list prices of desired vacu-break
branches and accessories.
11. Vacu-Break Main — With Circuit
Breaker Branch Panelboards
Price appropriate main switch panel, then
add list price of desired circuit breaker
branches and accessories.
16. Ground Fault on Main Breaker
Description
Ampere
Rating
List
Price $
Conventional Ground Fault
includes:
Ground Fault Relay, Ground
Sensor, CPT and Shunt Trip 400-600
6300.
Test and Monitor Panel
1070.
Ground Fault add to
Sensitrip III breaker price
400-600 2500.
17. Time Clocks
Sangamo, Tork or Paragon time clock
can be supplied, mounted in panelboard
cabinet. For required increase in
enclosure dimensions, consult local
sales office. Price appropriate
panelboard, then add list price below.
Description
List
Price $
Time Clock (one or two pole, single or
double throw contacts; three pole, .
single throw) 277V maximum with
plain dial . . . . . . . . . . . . . . . . . . . . . . 1070.
Add for —
Astronomical dial . . . . . . . . . . . . .
210.
An omitting device . . . . . . . . . . . .
75.
Reserve power or carryover . . . . . 2450.
Space and mounting provisions only
540.
10
12. Grounding of Panelboards
(No Brazed Ground Bus Offered)
Ground Bus ships with the interior as
standard — $115. list added for factory
mounted.
Non-Insulated Equipment Ground Bar
Including Ground Lug . . . . . . Standard
Insulated Equipment Ground Bar
Including Ground Lug . . $ 395. per panel
LEN
Modification
TAKES 20.0 unit space
≤ 800A 25" to unit space
≥ 800A 30" unit space
≤ 60 AMPS 10" unit space
> 60 AMPS 15" unit space
At 250 Volts — available on 5" unit only.
“J” clips not required on 600V twin 200A switch.
Class “R” and “T” clips not available on this switch.
Class
Discount Schedule PBSB
Integral
ground fault not available on 600 amp 3-phase,
4-wire systems. Only 3-phase, 4-wire systems. Only 3phase wire from 3-phase, 4-wire systems.
Available in 90" high enclosure only. Unit space is
42 1/2" with Test and Monitor Panel; 45" without Test and
Monitor Panel.
Not
available on Sensitrip III.
required unit space — consult local sales office.
Price includes increased enclosure height if required.
No charge at time of order.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-51
PANELBOARDS
For inches / millimeters conversion, see Application Data section.
Sentron® Panelboards
Modifications and Additions
Selection
Type S4/F1/P4
18. Circuit Breaker Accessories
Breaker
Type
23. Alternate Lugs Main Lug Only
List
Price $
Handle Blocking Device
Blocks handle in either the “ON” or
“OFF” position See Page 10-73
Padlocking Device — Padlocks in
“OFF” position See Page 10-73
Style
Amperage
Rating
400
N/A
Deduct 2.5"
(1)#3/0 AWG - 750 kcmil or (2)#3/0 AWG - 250 kcmil Unit Space
Cu or Al unit space
from available
unit space
125.
600
N/A
(2)#3/0 AWG - 750 kcmil or (4)#3/0 - 350 kcmil
0
255.
(3)#3/0 AWG - 750 kcmil Cu or Al
Deduct 5.0"
Unit Space
from available
unit space
390.
(4)#3/0 AWG - 750 kcmil Cu or Al
Deduct 7.5"
Unit Space
from available
unit space
510.
MLO
800
Box Height
Addition
Alternate Connectors
19. Ground Fault Sensing Relay Kit
Equipment Protection ED Frames
(30 ma) See Section 6
1000
20. Main Bus
Standard main bus and ground bus is tin
plated aluminum. For copper main bus,
neutral bus and ground bus add from the
table for each panel. Copper Neutral Bar
$115. List Price.
Main Bus
Catalog List Price $
Number 햲 400A 600 -1200A
Silver Plated Cu
E
475. 1220.
1000A per sq. in Cu D
540. 1230.
750A per sq. in Al
340.
B
24. Compression Lugs
Style
Amp
Breaker
Rating Type
Compression
Connectors
Box Height
Addition
MLO
List
Price $
400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150.
600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190.
800-1200 . . . . . . . . . . . . . . . . . . . . . . . . 260.
Main
Breaker
22. Shunt Trip on Main and Branches 햳
Price Addition $
400
N/A
(1)250-500 kcmil or
(2)#2/0 AWG - 250 kcmil Cu or Al
3-Phase 4-Wire = $150
Deduct 5.0" Unit Space
3-Phase 3-Wire = $115
from available unit space 1-Phase 3-Wire = $115
2-Wire = $115
600
N/A
(2)#3/0 AWG - 500 kcmil
3-Phase 4-Wire = $200
Deduct 5.0" Unit Space
3-Phase 3-Wire = $150
from available unit space 1-Phase 3-Wire = $150
2-Wire = $150
800
N/A
(3)#3/0 AWG - 500 kcmil Cu or Al
3-Phase 4-Wire = $255
Deduct 5.0" Unit Space
3-Phase 3-Wire = $190
from available unit space 1-Phase 3-Wire = $190
2-Wire = $190
1000
N/A
(4)#3/0 AWG - 500 kcmil Cu or Al
3-Phase 4-Wire = $350
Deduct 5.0" Unit Space
3-Phase 3-Wire = $255
from available unit space 1-Phase 3-Wire = $255
2-Wire = $255
1200
N/A
(4)#3/0 AWG - 500 kcmil Cu or Al
3-Phase 4-Wire = $350
Deduct 5.0" Unit Space
3-Phase 3-Wire = $255
from available unit space 1-Phase 3-Wire = $255
2-Wire = $255
645.
21. Copper Lugs —
For Main Lug Only Panels
Standard main lugs and neutral lugs are
tin plated aluminum, UL listed for use
with aluminum / copper cables. Price
below is for one panel and includes
copper lugs for main lugs and neutral lugs,
and must be used with copper cables.
Main Bus
Ampere Rating
N/A
Price
Addition $
400
JD6, JXD6,
HJD6, CJD6,
(2)#2/0 AWG - 500 kcmil Cu or Al
SJD6, SHJD6,
SCJD6
0
3-Phase 4-Wire = $350
3-Phase 3-Wire = $255
1-Phase 3-Wire = $255
2-Wire = $255
PANELBOARDS
10
See Breaker Section for list prices on this
option.
For inches / millimeters conversion, see Application Data
section.
햲
햳
Replace ”A” in position 11 of catalog number.
Shunt Trip on 100A frame breakers increases mounting
height to 6.25" for twin mounting.
10-52
햴
햵
Must price “D” for “B” main bus from item #20 above.
See section (6) circuit breakers for 100% rated circuit
breaker requirements.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Sentron Panelboards
®
Type 1 Enclosure Modifications and Additions
Catalog
Number
Selection
Description
Panel
Adder $
After Market
Price $
P4
P4
P4
P4
P4
P4
box 32 W X 10 Dp X 60 Ht.
box 32 W X 10 Dp X 75 Ht.
box 32 W X 10 Dp X 90 Ht.
Nema 3R/12 32W X 10 Dp X 60 Ht.
Nema 3R/12 32W X 10 Dp X 75 Ht.
Nema 3R/12 32W X 10 Dp X 90 Ht.
Standard
Standard
Standard
1175.
1175.
1175.
595.
595.
595.
2255.
2255.
2255.
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
P4
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Standard
Standard
Standard
615.
645.
670.
615.
645.
670.
910.
935.
965.
910.
935.
965.
730.
755.
785.
730.
755.
785.
1090.
1115.
1140.
1090.
1115.
1140.
Boxes
PB60
PB75
PB90
WP260
WP275
WP290
Trims
P460V
P475V
P490V
P460NV
P475NV
P490NV
P460VHG
P475VHG
P490VHG
P460NVHG
P475NVHG
P490NVHG
P460VD
P475VD
P490VD
P460NVD
P475NVD
P490NVD
P460VDD
P475VDD
P490VDD
P460NVDD
P475NVDD
P490NVDD
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
piece trim) vented 60"
piece trim) vented 75"
piece trim) vented 90"
piece trim) unvented 60"
piece trim) unvented 75"
piece trim) unvented 90"
piece trim) vented 60" w/Hinged gutter covers
piece trim) vented 75" w/Hinged gutter covers
piece trim) vented 90" w/Hinged gutter covers
piece trim) unvented 60" w/Hinged gutter covers
piece trim) unvented 75" w/Hinged gutter covers
piece trim) unvented 90" w/Hinged gutter covers
PC. Door) vented 60"
PC. Door) vented 75"
PC. Door) vented 90"
PC. Door) unvented 60"
PC. Door) unvented 75"
PC. Door) unvented 90"
PC. Door in door) vented 60"
PC. Door in door) vented 75"
PC. Door in door) vented 90"
PC. Door in door) unvented 60"
PC. Door in door) unvented 75"
PC. Door in door) unvented 90"
290.
290.
290.
290.
290.
290.
360.
360.
360.
360.
360.
360.
Flush Mounting Kits
F60
F75
F90
Flush kit for P4 60" Ht.
Flush kit for P4 75" Ht.
Flush kit for P4 90" Ht.
145.
145.
145.
Type 3R/12 Enclosures
WP260
WP275
WP290
P4 3R/12 Enclosures 60"
P4 3R/12 Enclosures 75"
P4 3R/12 Enclosures 90"
1175.
1175.
1175.
2255.
2255.
2255.
10
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
No
price adder. Note as Mod.
as Mod.
charge if noted at time of order.
Note
No
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-53
Panelboards
Type P4 Panelboards
Dimensions
Type 1 Box
Box is symmetrical
4.375 in.
[ 111 ]
Box To Wall
Mounting Holes
6.635 in.
[169 ]
Recommended Conduit Area
8.0 in.
[ 203 ]
Interior To Box
Mounting
Stubs
30.0 in.
[ 254 ]
햲
60 in., 75 in., 90 in.
[ 1524 ] [ 1905 ] [ 2286 ]
6.635 in.
[ 169 ]
14 in.
[356]
10.0 in.
[ 254 ]
4.375 in.
[ 111 ]
24 in.
[ 610 ]
햲
32 in.
[ 813 ]
햲
Type 3R and 3R/12 Box
12 in.
[ 305 ]
.375 in.
[ 10 ]
15.81 in.
[ 402 ]
Mounting
Bracket
햲
60 in., 75 in., 90 in.
[ 1524 ] [ 1905 ] [ 2286 ]
.375 in.
[ 10 ]
15.81 in.
[ 402 ]
32 in. 햲
[813 ]
.87 in.
[ 22 ]
10
34 in.
[ 864 ]
10.0 in.
[ 254 ]
햲
PANELBOARDS
36 in.
[ 914 ]
햲 Dimensions
are interior of the box. Add 5/8" to width for absolute
dimension. Add 1/8" to height for absolute dimension.
Dimensions shown in inches and millimeters [ ].
10-54
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Type P5 Panelboards
Features
The P5 panel is the largest footprint
distribution panel in the Siemens panel
family. Even though it is our largest
panel type, the P5 panel is still a space
saver with it’s 38" width and 12.75"
depth. With even higher main ratings
to fit the application that require more or
larger branch devices. This panel offers a
wide array of factory assembled options
and has the ability to mix breaker frames
in unit space up to 1200 amps and
fusible switches up to 1200 amps.
Bussing options for the P5 vary from the
standard temperature rated aluminum to
temperature rated copper and 750 A/SI
aluminum and 1000A/Si copper designs.
All aluminum bussing in the P5 panel is
tin-plated as a standard. Silver-plated is
offered as the default for copper bus and
tin as an option. Integrated time clocks,
bus mounted contactors as mains or
submains, split bus and subfeed lugs
(up to 600 amps) are just a few of the
options of this flexible panel.
The P5 panel configurations defined by
the unit space allowed for a given
amperage, main device and box height.
The P5 panel starts with a 60" high box.
All of the branch devices are unit space
mounted. Breakers and switches can be
mixed and matched to meet customer
requirements.
General
Weight – Approximate
Total panelboard weight when filled
with a normal quantity of breakers and
accessories is about 10 lbs. (1 kg) per
inch (54g per mm) of box height.
Main Lugs 햲
Ampere
Rating
Connectors Suitable for
Copper or Aluminum
800
1000
1200
(3) - #3/0 AWG-500 Kcmil
(4) - #3/0 AWG-500 Kcmil
(4) - #3/0 AWB-500 Kcmil
햲
Alternate lugs for 750 kcmil cable are available, but
result in significant loss of branch unit mounting space.
Consult Siemens.
Gauge Steel of Boxes Fronts, Surface
and Flush
Dimensions in
inches (mm)
Gauge Steel
Width
Height
Box
Fronts
38"
(965)
60 - 75 - 90
(1524, 1905,
2286)
#16햲
#14 (1 piece trim)
#14 Ga. (4 piece
trim)
햲
16 gauge side panels, 12 gauge back support.
Main Lug / Main Breaker / Main
Switch
Enclosure – Standard Type 1 enclosure
is 38" wide x 12.75" deep. X Box Height
is determined by main device and unit
space. See charts for box height.
Voltage – 600V AC max.
250V DC max.
Amperage – 800-1200 amp Main
breaker, 800-1200 amp MLO (check
availability of 1600 amp with factory),
400-1200 amp Main switch.
Short Circuit Rating – 200 Kaic max.
symmetrical or equal to the lowest rated
device installed unless a series rating is
indicated. Panels with subfeed or
feed-thru lugs without a main device,
circuit breaker or fusible unit, are limited
to a three-cycle rating. The three-cycle
rating for the P5 panel is limited to 42
Kaic. Note that the main device may be
mounted remote from the panel.
10
Bussing – The P5 panel has more
options to meet market requirements.
The standard bussing is temperature
rated aluminum. The rating is per the
requirements of UL 67 – the standard for
panelboards. All aluminum bussing is
tin-plated. Optional bussing for the P5
panel is: 750 A/si aluminum, temperature
rated copper, and 1000 A/si copper.
The copper bus option for this panel is
tin-plated.
PANELBOARDS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-55
Panelboards
Power and Distribution
Selection/Dimensions
Enclosure Selection ���
Enclosure Dimension in Inches (mm)
Available Unit Space in Inches (mm)
H
W
D
Main Lug
Main Breaker
Main Switch
Type 1, 3R/12
Type 1, 3R/12
Type 1
Type 3R/12
800 / 1200A
800 / 1200A
800 / 1200A
60 (1524)
75 (1905)
90 (2286)
38 (965)
38 (965)
38 (965)
12.75 (324)
12.75 (324)
12.75 (324)
14.25 (362)
14.25 (362)
14.25 (362)
30 (762)
45 (1143)
60 (1524)
20 (508)
35 (889)
50 (1270)
—
35 (889)
50 (1270)
Main Breaker Unit Space Dimensions
Dimensions in Inches (mm)
Ampere
Rating
800
1200
Breaker Type
A
LXD6, LMXD6, LMD6, MXD6, MD6, HMD6
CMD6, SCMD6, SHMD6, SMD6
NXD6, ND6, HND6, CND6, SND6, SHND6
13.00 (330)
10.42 (265)
13.00 (330)
Main Switch
Maximum
Ampere Rating
400A/600A VB
800A/1200A HCP
Neutral
B
13.125 (333)
Main Switch Connectors
A
9.3
10.3
Ampere
Rating
B
13.125
13.125
400
600
800
1200
Connectors suitable for
Copper or Aluminum
(1) #3/0 AWG-500 kcmil
(2) #3/0 AWG-250 kcmil
(2) #3/0 AWG-500 kcmil
(3) #3/0 AWG-500 kcmil
(4) #3/0 AWG-500 kcmil
Main Breaker Wire Bending Space
Dimensions & Main Switch
Main Lugs Only Wire Bending Space
Lugs
Standard
Oversize
Crimp
Standard with
Subfeed
Standard with
Feed-thru
Dimensions in inches (mm)
Main Lug
800A
1000A
C
D
1200A
E
Neutral
800A
G
15.969 (406)
25.969 (660)
18.687 (475)
15.969 (406)
25.969 (660)
18.250 (464)
15.969 (406)
25.969 (660)
18.250 (464)
13.125 (333)
23.125 (587)
15.937 (405)
—
—
—
13.125 (333)
—
—
—
13.125 (333)
PANELBOARDS
10
Main Lugs Only Wire Bending Space
햲
Standard trim is for space without door. Surface flush
one piece trim is available for 32" (813mm) wide circuit
breaker panel.
10-56
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Panelboards
Power and Distribution
Selection
Type P5
Shown with Standard Mains, Top Fed
and Surface Trim
Catalog number is for aluminum main
bus. For optional copper main bus
change “A” in position 11 to “C”.
Panels are top feed, surface mounted.
For bottom feed, change “T” in position
12 to “B”. For flush mounting,
change “S” in position 13 to “F”.
Replace fifth and sixth position
in panelboard catalog number,
with alternate main breaker code.
Use price adders from main breaker
section table. Horizontally mounted.
Main Lugs Only — shown with aluminum bus, top fed, and surface trims.
Unit
Space
(inches)
208Y/120V
3-Phase, 4-Wire
Catalog Number
List
Price $
3-Phase, 4-Wire
Catalog Number
List
Price $
1-Phase, 3-Wire
Catalog Number
List
Price $
30
45
60
P5C60ML800ATS
P5C75ML800ATS
P5C90ML800ATS
2020.00
2130.00
2260.00
P5B60ML800ATS
P5B75ML800ATS
P5B90ML800ATS
2020.00
2130.00
2260.00
P5A60ML800ATS
P5A75ML800ATS
P5A90ML800ATS
2020.00
2130.00
2260.00
1000
30
45
60
P5C60ML101ATS
P5C75ML101ATS
P5C90ML101ATS
2460.00
2610.00
2750.00
P5B60ML101ATS
P5B75ML101ATS
P5B90ML101ATS
2460.00
2610.00
2750.00
P5A60ML101ATS
P5A75ML101ATS
P5A90ML101ATS
2460.00
2610.00
2750.00
1200
30
45
60
P5C60ML120ATS
P5C75ML120ATS
P5C90ML120ATS
2900.00
3070.00
3230.00
P5B60ML120ATS
P5B75ML120ATS
P5B90ML120ATS
2900.00
3070.00
3230.00
P5A60ML120ATS
P5A75ML120ATS
P5A90ML120ATS
2900.00
3070.00
3230.00
Maximum
Panel
Ampere Rating
Unit
Space
(inches)
240
3-Phase, 3-Wire
Catalog Number
List
Price $
3-Phase, 4-Wire
Catalog Number
List
Price $
1-Phase, 3-Wire
Catalog Number
List
Price $
30
45
60
P5D60ML800ATS
P5D75ML800ATS
P5D90ML800ATS
1610.00
1720.00
1800.00
P5E60ML800ATS
P5E75ML800ATS
P5E90ML800ATS
2020.00
2130.00
2260.00
P5F60ML800ATS
P5F75ML800ATS
P5F90ML800ATS
1610.00
1720.00
1800.00
1000
30
45
60
P5D60ML101ATS
P5D75ML101ATS
P5D90ML101ATS
1960.00
2070.00
2150.00
P5E60ML101ATS
P5E75ML101ATS
P5E90ML101ATS
2460.00
2610.00
2750.00
P5F60ML101ATS
P5F75ML101ATS
P5F90ML101ATS
1960.00
2070.00
2150.00
1200
30
45
60
P5D60ML120ATS
P5D75ML120ATS
P5D90ML120ATS
2300.00
2430.00
2550.00
P5E60ML120ATS
P5E75ML120ATS
P5E90ML120ATS
2900.00
3070.00
3230.00
P5F60ML120ATS
P5F75ML120ATS
P5F90ML120ATS
2300.00
2430.00
2550.00
Maximum
Panel
Ampere Rating
800
800
240/120V
120/240V or 250 Vdc Max
480V
480Y/277V
Main Circuit Breaker — shown with aluminum bus, top fed, and surface trims.
Unit
Space
(inches)
208Y/120V
3-Phase, 4-Wire
Catalog Number
List
Price $
3-Phase, 4-Wire
Catalog Number
List
Price $
1-Phase, 3-Wire
Catalog Number
List
Price $
21.25
36.25
51.25
P5C60M1800ATS
P5C75M1800ATS
P5C90M1800ATS
8140.00
8590.00
9040.00
P5B60M1800ATS
P5B75M1800ATS
P5B90M1800ATS
8140.00
8590.00
9040.00
P5A60M1800ATS
P5A75M1800ATS
P5A90M1800ATS
6820.00
7190.00
7570.00
1200
20
35
50
P5C60N1120ATS
P5C75N1120ATS
P5C90N1120ATS
12900.00
13620.00
14350.00
P5B60N1120ATS
P5B75N1120ATS
P5B90N1120ATS
12900.00
13620.00
14350.00
P5A60N1120ATS
P5A75N1120ATS
P5A90N1120ATS
11590.00
12230.00
12880.00
Maximum
Panel
Ampere Rating
Unit
Space
(inches)
240
3-Phase, 4-Wire
Catalog Number
List
Price $
3-Phase, 4-Wire
Catalog Number
List
Price $
1-Phase, 3-Wire
Catalog Number
List
Price $
21.25
36.25
51.25
P5D60M1800ATS
P5D75M1800ATS
P5D90M1800ATS
7720.00
8160.00
8590.00
P5E60M1800ATS
P5E75M1800ATS
P5E90M1800ATS
8140.00
8590.00
9040.00
P5F60M1800ATS
P5F75M1800ATS
P5F90M1800ATS
7720.00
8160.00
8590.00
20
35
50
P5D60N1120ATS
P5D75N1120ATS
P5D90N1120ATS
12310.00
13010.00
13680.00
P5E60N1120ATS
P5E75N1120ATS
P5E90N1120ATS
12900.00
13620.00
14350.00
P5F60N1120ATS
P5F75N1120ATS
P5F90N1120ATS
12310.00
13010.00
13680.00
Maximum
Panel
Ampere Rating
800
800
1200
240/120V
120/240V or 250 Vdc Max
480V
480Y/277V
10
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
Alternate main breaker requires additional 1.25" unit
space.
For 600V, change “F” in position 3 to “G”. Price only
branch breakers with 600V ratings.
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-57
Panelboards
Power and Distribution
Selection
Main Fusible Switch (fuses not included)
Maximum
Panel
Ampere Rating
400
600
800
1200
Maximum
Panel
Ampere Rating
400
600
800
1200
Unit
Space
(inches)
20
40
25
40
28.75
43.75
28.75
43.75
Unit
Space
(inches)
25
40
25
40
28.75
43.75
28.75
43.75
208Y/120V
240/120V
120/240V
3-Phase, 4-Wire
Catalog Number
P5C75MS400ATS
P5C90MS400ATS
P5C75MS600ATS
P5C90MS600ATS
P5C75MS800ATS
P5C90MS800ATS
P5C75MS120ATS
P5C90MS120ATS
240V
List
Price $
3480.00
3660.00
4920.00
5170.00
7640.00
8030.00
9770.00
10290.00
3-Phase, 4-Wire
Catalog Number
P5B75MS400ATS
P5B90MS400ATS
P5B75MS600ATS
P5B90MS600ATS
P5B75MS800ATS
P5B90MS800ATS
P5B75MS120ATS
P5B90MS120ATS
480Y/277V
List
Price $
3480.00
3660.00
4920.00
5170.00
7640.00
8030.00
9770.00
10290.00
1-Phase, 3-Wire
Catalog Number
P5A75MS400ATS
P5A90MS400ATS
P5A75MS600ATS
P5A90MS600ATS
P5A75MS800ATS
P5A90MS800ATS
P5A75MS120ATS
P5A90MS120ATS
480V
List
Price $
2790.00
2940.00
4170.00
4380.00
6290.00
6610.00
8070.00
8500.00
3-Phase, 3-Wire
Catalog Number
P5D75MS400ATS
P5D90MS400ATS
P5D75MS600ATS
P5D90MS600ATS
P5D75MS800ATS
P5D90MS800ATS
P5D75MS120ATS
P5D90MS120ATS
List
Price $
3480.00
3660.00
4920.00
5170.00
7640.00
8030.00
9770.00
10290.00
3-Phase, 4-Wire
Catalog Number
P5E75MS400ATS
P5E90MS400ATS
P5E75MS600ATS
P5E90MS600ATS
P5E75MS800ATS
P5E90MS800ATS
P5E75MS120ATS
P5E90MS120ATS
List
Price $
4650.00
4900.00
5190.00
5480.00
7650.00
8050.00
9770.00
10290.00
3-Phase, 3-Wire
Catalog Number
P5F75MS400ATS
P5F90MS400ATS
P5F75MS600ATS
P5F90MS600ATS
P5F75MS800ATS
P5F90MS800ATS
P5F75MS120ATS
P5F90MS120ATS
List
Price $
3890.00
4100.00
4920.00
5180.00
7250.00
7620.00
9240.00
9730.00
Alternate Main Breaker Selection
Ampere
Rating
800
800
1200
Maximum IR (KA)
Symmetrical Amperes
Catalog
Numbe r
M1
M2
M3
LMXD6
HD
M6
HM
CM
SM
S8
C8
N1
N2
N3
N6
HN
CN
SN
SI
CI
240V AC
65
100
200
65
100
65
100
200
65
100
200
65
100
200
65
100
200
65
100
200
480V AC
35
65
100
50
65
50
65
100
50
65
100
35
65
100
50
65
100
50
65
100
List
Price $
STD
1130.
3260.
590.
1870.
1710.
2370.
4370.
5860.
3540.
5860.
STD
1130.
2500.
1190.
2370.
2500.
2440.
4080.
5080.
600V AC
25
50
65
25
50
25
50
50
25
50
65
25
50
65
25
50
50
25
50
65
Available Trip Values
600, 700, 800
600, 700, 800
600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
500, 600, 700, 800
600, 700, 800
600, 700, 800
500, 600, 800
800, 900, 1000, 1200
800, 900, 1000, 1200
800, 900, 1000, 1200
800, 900, 1000, 1200
800, 900, 1000, 1200
900, 1000, 1200
900, 1000, 1200
800, 900, 1000, 1200
800, 900, 1000, 1200
PANELBOARDS
10
1200
Breaker
Type
NMX
HMX
LMX
LMD6
HLMD6
MD6
HMD6
CMD6
SMD6
SHMD6
SCMD6
NNX
HNX
LNX
ND6
HND6
CND6
SND6
SHND6
SCND6
For inches / millimeters conversion, see Application
Data section.
For 600V, change “F” in position 3 to “G”. Price only
branch breakers with 600V ratings.
ground fault, see page 10-62.
For
10-58
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Replace
“MB” in catalog number with code letter.
Use adders from this table.
800 and 1200 ampere switches have “L” class fuse
provisions (Type HCP).
Discount Schedule PBSB
Panelboards
Power and Distribution
Selection
Type P5
Branch Circuit Breakers
Space price covers cost of housing frame plate with
blank cover plate. Provision price includes all necessary
mounting hardware, less circuit breaker, and includes
housing frame cover plate with breaker handle opening.
Discount Schedule PBSB
Mounting Height Maximum Interrupting Rating
(inches)
(KA)
Twin
Single 120V 120/240V 240V 277V 480Y/277
—
—
10
— —
—
3.75
—
—
10
— —
—
—
—
10
— —
—
3.75
—
—
10
— —
—
3.75
—
10
10
— —
—
3.75
—
22
22
— —
—
—
—
10
— —
—
3.75
—
—
10
— —
—
3.75
—
—
10
— —
—
—
—
10
— —
—
3.75
3.75
—
—
10
— —
—
3.75
—
—
10
— —
—
—
—
—
10 —
—
3.75
—
—
—
10 —
—
—
22
— —
—
3.75 —
3.75 —
—
22
— —
—
—
—
22
— —
—
—
—
22
— —
—
3.75
—
—
22
— —
—
—
—
22
— —
—
3.75
—
—
22
— —
—
—
—
—
65 —
14
3.75 —
—
—
65 —
14
100
100
100 25
25
3.75
—
100
100
100 25
25
100
100
100 25
25
85
85
85 35
35
3.75
—
85
85
85 35
35
85
85
85 35
35
100
100
100 65
65
3.75
—
100
100
100 65
65
100
100
100 65
65
—
—
—
65 —
18
3.75 —
—
—
65 —
18
—
—
—
65 —
18
25
—
—
—
100
3.75 —
—
—
100 —
25
—
—
—
100 —
42
—
—
—
100 —
—
3.75
—
—
—
100 —
—
—
—
—
100 —
—
—
—
—
200 —
—
3.75
—
—
—
—
— —
—
5
5
—
—
10 —
—
5
5
—
—
22 —
—
5
5
—
—
42 —
—
5
5
—
—
65 —
—
5
5
—
—
100 —
—
—
5
—
—
200 —
—
5
5
—
—
65 —
—
5
5
—
—
100 —
—
—
5
—
—
200 —
—
8.75
8.75
—
—
65 —
—
8.75
8.75
—
—
— —
—
8.75
8.75
—
—
100 —
—
—
8.75
—
—
200 —
—
—
8.75
—
—
65 —
—
—
8.75
—
—
100 —
—
—
—
—
—
65 —
—
—
—
—
100 —
—
8.75
—
—
—
—
200 —
—
—
—
—
—
65 —
—
—
8.75
—
—
100 —
—
—
8.75
—
—
65 —
—
—
8.75
—
—
100 —
—
—
—
—
—
65 —
—
—
—
—
100 —
—
10
—
—
—
—
200 —
—
—
—
—
—
65 —
—
—
10
—
—
100 —
—
—
—
—
—
65 —
—
—
—
—
100 —
—
10
—
—
—
—
200 —
—
—
—
—
—
65 —
—
—
10
—
—
100 —
—
—
8.75
—
—
65 —
—
—
8.75
—
—
100 —
—
—
8.75
—
—
200 —
—
—
10
—
—
65 —
—
—
10
—
—
100 —
—
—
10
—
—
200 —
—
1
For
Accessories
Ground
to 6 poles may be mounted in 3.75" of unit space.
such as shunt trips on three pole breakers
require 6.25" of unit space.
HED4 1-pole 15–30A = 65,000 IR
35–100A = 25,000 IR
480V 600V 250V DC
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— —
—
— 14
—
— 14
25
— 14
25
— 14
25
— 14
35
— 35
35
— 35
35
— 35
65
— 42
65
— 42
65
— 42
18
— 30
18
— 30
18
— 30
42
— 30
42
— 30
42
— 30
65
25 —
65
25 —
65
25 —
200
— 30
—
— —
—
— —
—
— —
—
— —
35
— 30
65
— 30
200
— 30
35
— 30
65
— 30
200
— 30
—
— 30
35
25 30
65
35 30
150 100 30
35
25 —
65
35 —
35
25 30
65
35 30
150 100 30
35
25 —
65
35 —
50
25 30
65
50 30
35
25 30
65
35 30
150 100 30
35
25 —
65
50 —
50
25 30
65
35 30
150 100 30
35
25 —
65
50 —
35
25 30
65
50 30
100
65 30
35
25 30
65
50 30
100
65 30
600V applications, ED6 available at same list price.
fault is not available on branch
Sensitrip breakers.
HED4 3-Pole = 42,000 IR
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-59
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
Provisions
Space for
$
Future $
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55.
35.
55
35.
55.
35.
55.
35.
55.
35.
50.
35.
50.
35.
50.
35.
50.
35.
50.
35.
50.
35.
50.
35.
50.
35.
50.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
110.
75.
150.
75.
150.
75.
150.
75.
320.
75.
320.
75.
320.
75.
320.
75.
320.
75.
320.
130.
350.
130.
350.
130.
350.
130.
350.
130.
350.
130.
350.
140.
640.
140.
640.
140.
640.
140.
640.
140.
640.
210. 1380.
210. 1380.
210. 1380.
210. 1380.
210. 1380.
210. 1380.
210. 1380.
220. 1560.
220. 1560.
220. 1560.
220. 1560.
220. 1560.
210. 1720.
210. 1720.
210. 1720.
210. 1720.
210. 1720.
210. 1720.
10
Available
List Price Installed $
Trip Value
Ampere Ratings
1-Pole 2-Pole 3-Pole
15, 20, 30, 40, 50, 60
100.
170.
250.
BL
70
160.
190.
290.
80, 90, 100
—
230.
330.
BL (HID)
15, 20, 30
110.
190.
—
BAF (arc fault) 15, 20
220.
380.
—
BAFH(arc fault) 15, 20
280.
450.
—
15, 20, 30
220.
250.
—
BLF (GFCI)
40, 50, 60
—
290.
—
BLE (EQ GFI) 15, 20, 30
200.
250.
—
15, 20, 30
420.
530.
—
BLEH
40, 50, 60
—
530.
—
BGL (SWN)
15, 20, 30
—
180.
230.
15, 20, 30, 40, 50, 60, 70
—
210.
—
BL (240V)R
70, 80, 90, 100
—
310.
—
15, 20, 30, 40, 50, 60
130.
240.
340.
BLH (120V)
70
—
340.
380.
80, 90, 100
225.
280.
480.
15, 20, 30
250.
340.
—
BLHF (GFCI)
40, 50, 60
—
—
—
15, 20, 30, 40, 50, 60
130.
320.
400.
HBL
70, 80, 90, 100
—
420.
540.
15, 20, 30, 40, 50, 60
130.
320.
400.
BQD
70, 80, 90, 100
200.
420.
540.
15—60
140.
460.
510.
NGB
70—100
210.
500.
660.
110—125
—
820. 1190.
15—60
270.
450.
590.
NEB
70—100
300.
510.
670.
110—125
730.= 1290. 1440.
15—60
390.
690.
910.
HEB
70—100
430.
760.
990.
110—125
1220.= 2150. 2280.
15, 20, 30, 40, 50, 60
175.
570.
630.
ED4
70, 80, 90, 100
260.
620.
820.
110, 125
— 1010. 1470.
15, 20, 30, 40, 50, 60
490.
850. 1120.
HED4
70, 80, 90, 100
490.
950. 1220.
110, 125
— 2660. 2830.
15, 20, 30, 40, 50, 60
—
940. 1250.
HHED6
70, 80, 90, 100
— 1060. 1360.
110, 125
— 2970. 3130.
15, 20, 30, 40, 50, 60, 70, 80, 90, 100
— 1970. 2410.
CED6
110, 125
— 3160. 3980.
QJ2
60, 70, 80, 90, 100, 125, 150, 175, 200, 225
—
720.
940.
QJH2
60, 70, 80, 90, 100, 125, 150, 175, 200, 225
—
740. 1250.
QJ2H
60, 70, 80, 90, 100, 125, 150, 175, 200, 225
— 1030. 1540.
FXD6
70, 80, 90, 100, 125, 150, 175, 200, 225
— 1250. 1590.
HFD6
70, 80, 90, 100, 125, 150, 175, 200, 225
— 2750. 3350.
CFD6
70, 80, 90, 100, 125, 150, 175, 200, 225
— 3500. 4470.
FXD6
250
— 2190. 2700.
HFD6
250
— 3940. 4240.
CFD6
250
— 4590. 5580.
JXD2
200, 225, 250, 300, 350, 400
— 2150. 2350.
JXD6
200, 225, 250, 300, 350, 400
— 2230. 2750.
HJD6
200, 225, 250, 300, 350, 400
— 3690. 4380.
CJD6
200, 225, 250, 300, 350, 400
— 4910. 6310.
SJD6
200, 225, 250, 300, 350, 400
—
— 5960.
SHJD6
200, 300, 400
—
— 6610.
LXD6
450, 500, 600
— 3540. 4580.
HLD6
250, 300, 350, 400, 450, 500, 600
— 4280. 5360.
CLD6
450, 500, 600
— 6600. 9720.
300, 400, 500, 600
—
— 6600.
SLD6
SHLD6
300, 400, 500, 600
—
— 6680.
LMD6
500, 600, 700, 800
— 5060. 6520.
HLMD6
500, 600, 700, 800
— 6510. 8060.
MD6
500, 600, 700, 800
— 7450. 9500.
HMD6
500, 600, 700, 800
— 9320. 10870.
CMD6
500, 600, 700, 800
— 8010. 12160.
SMD6
600, 700, 800
—
— 10260.
SHMD6
600, 700, 800
—
— 11030.
ND6
800, 900, 1000, 1200
—
— 13040.
HND6
800, 900, 1000, 1200
—
— 13670.
CND6
800, 900, 1000, 1200
—
— 17690.
SND6
900, 1000, 1200
—
— 13030.
SHND6
800, 1000, 1200
—
— 13900.
NMX
600, 700, 800
— 4590. 5930.
HMX
600, 700, 800
— 5910. 7320.
LMX
600, 700, 800
— 7280. 11060.
NNX
800, 900, 1000, 1200
— 8910. 11850.
HNX
800, 900, 1000, 1200
— 10490. 12430.
LNX
800, 900, 1000, 1200
— 15430. 17690.
Breaker
Type
Panelboards
Power and Distribution
Selection/Dimensions
Branch Switch Selection (fuses not included)
Ampere
Rating
List Price $
3-Pole
2-Pole
Space
Only $
Provisions
for
Future $
240V — Twin Mounted
30-30
30-30
30-60
60-60
60-100
100-100
200-200
965.
1020.
1020.
1020.
1315.
1410.
2510.
815.
870.
880.
900.
1040.
1050.
—–
NEC Fuse
105.
170.
170.
170.
225.
225.
275.
—
—
—
—
2015.
2015.
4740.
4740.
5110.
Clips
⁄2
140.
225.
225.
225.
255.
255.
435.
2
5
5
5
71⁄2
71⁄2
10
—
—
225.
275.
225.
475.
475.
680.
680.
71⁄2
71⁄2
71⁄2
10
71⁄2
15
15
161⁄4
161⁄4
280.
280.
295.
435.
295.
475.
475.
680.
680.
Ampere
Rating
List Price $
3-Pole
2-Pole
Space
Only $
Provisions
for
Future $
1400.
1400.
1400.
1525.
1610.
2895.
—
—
—
—
—
—
225.
225.
225.
225.
225.
275.
295.
295.
295.
295.
295.
435.
—
—
—
—
—
—
—
—
71⁄2
71⁄2
71⁄2
71⁄2
71⁄2
10
NEC Fuse Clips
600V — Single Mounted
100
1070.
200
1465.
400
3170.
400 (HCP)
9295.
600
3860.
600 (HCP)
9295.
800 (HCP) 9295.
1200 (HCP) 11100.
Mounting
Height
(inches)
NEC Fuse Clips
600V — Twin Mounted
30-30
30-60
60-60
60-100
100-100
200-200
1
NEC Fuse Clips
240V — Single Mounted
030
830.
060
830.
0100
1080.
0200
1355.
0200
—
0400
2545.
0600
3540.
0800 (HCP) 9295.
1200 (HCP) 11100.
Mounting
Height
(inches)
225.
275.
475.
680.
475.
680.
680.
680.
295.
445.
475.
680.
475.
680.
680.
680.
71⁄2
10
15
15
161⁄4
161⁄4
Branch Breaker Side Gutter Inches (mm)
Reference
Letter
A
14.0 (356)
10.0 (254)
9.5 (242)
8.25 (210)
8.125 (207)
7.615 (193)
11.769 (299)
13.425 (341)
8.956 (227)
13.0 (330)
12.0 (305)
10.0 (254)
8.0 (203)
10.5 (267)
9.3 (236)
10.3 (262)
13.0 (330)
10.75 (273)
B
C
D
E
F
G
H
I
J
K
M
N
O
P
Q
R
S
T
U
V
W
BL
BLH, HBL, BQO
ED4, ED6
HED4, HHED6
QJ2, QJH2
QJ2H
FXD6, FD6
HFD6
JXD6, JD6
HJD6
CED6
BL
BLH, HBL, BQO
ED4, ED6
HED4, HHED6
QJ2, QJH2
QJ2H
FXD6, FD6
HFD6
JXD6, JD6
HJD6
CED6
CFD6
JXD6, JD6, LXD6, LD6, SLD6
SJD6, SHJD6, HLD6, SHLD6
CJD6, CLD6
MD6, ND6, CMD6, CND6, HMD6, HND6, NNX, HNX, LNX
SMD6, SND6
LMD6, HLMD6, NMX, HMX, LMX
VB 2.5" 30A Gutter
VB 2.5" 30A Gutter
VB 5" 30–60A Gutter
VB 5" 30–60A Gutter
VB 7.5" 60–100A Gutter
VB 7.5" 60–100A Gutter
VB 10" 200A Gutter
VB 10" 200A Gutter
VB 7.5" 100A Gutter
VB 10" 200A Gutter
VB 15" 400–600A Gutter
HCP 16–25" 400–1200A Gutter
NGB
NGB
NEB, HEB
NEB, HEB
A
B
C
D
E
F
G
H
I
J
K
M
N
O
P
Q
R
S
T
U
V
W
PANELBOARDS
10
A
B
C
D
E
F
G
H
I
J, M, N, O
K
P
Q
R, S
T
U
V
W
Panel Width 38 in.
Inches (mm)
For inches / millimeters conversion, see Application Data
section.
10-60
Space price covers cost of housing frame plate without
breaker handle opening.
Provisions include all necessary mounting hardware
less breakers.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
For Class J, R or T fuse clip prices, refer to page 10-62.
800 and 1200 ampere switches have class “L” fuse
provisions. (Type HCP).
NEC fuse clips only.
Discount Schedule PBSB
Panelboards
Power and Distribution
Selection/Dimensions
Types P5 and SPP/FPP, F2 (12 3/4" deep)
Connecting Strap Kits
Circuit Breaker
Connecting Strap Kits
Fusible
For use with Sentron Deep or Type S5 power panels
12.75" Deep
Box
Blank Plates
Circuit Breaker and Vacu-Break
For use with Sentron FPP Deep or Type F2/P5
power panels
For use with Sentron SPP and Type S5
power panels
Catalog
Number
List
Price $
1.25
6FPB01
196.00
2.5
6FPB02
224.00
254.00
3.75
6FPB03
224.00
F657D
254.00
5.0
6FPB05
224.00
5, 7.5
F657D
254.00
10.0
6FPB10
302.00
60–100
5, 7.5
F657D
254.00
1622.00
100–100
5, 7.5
F657D
254.00
1622.00
100
7.5
F657D
254.00
SCFD
1622.00
200
7.5
F657D
254.00
8.75
SJ1D
2254.00
200
10
F671D
393.00
Twin
8.75
SJ2D
2488.00
200–200
10
F672D
430.00
SJD6
Single
8.75
SSJ1D
2488.00
400–600
15
F6150D
186.00
CJD6
Single
8.75
SCJD
2254.00
800–1200
16.25
F6162D
1366.00
SCJD6
Single
8.75
SSCJD
2254.00
LD6
Single
8.75
SL6D
2668.00
SLD6
Single
8.75
SSL6D
2668.00
CLD6
Single
8.75
SCLD
2668.00
SCLD6
Single
8.75
SSCLD
2668.00
8.75
Unit
Height
(inches)
12. 75" Deep Box
Unit
Height
(inches)
Catalog
Number
30–30
2.5
F602D
210.00
902.00
30–30
5, 7.5
F657D
SNBD
902.00
30–60
5, 7.5
3.75
SE6D
902.00
60–60
Single
3.75
SCED
882.00
QJ
Twin
5.
SQJD
FD6
Twin
5.
SF6D
CFD6
Single
5.
JXD2, JXD6
Single
JXD2, JXD6
Breaker
Type
Catalog List
Number Price $
Mounting
BL /BQD
Twin
3.75
SBLBD
902.00
NGB
Twin
3.75
SNBD
NEB, HEB
Twin
3.75
ED
Twin
CED6
LMD6, HLMD6
Single
SLM1D
3240.00
MD6, HMD6,
CMD6
Single
10.
SMND
3847.00
SMD6, SHMD6
Single
10.
SSMND 4097.00
ND6, HND6
Single
10.
SMND
SND6, SHND6,
SCND6
Single
10.
SSMND 4097.00
NM, HM, LM,
SNM, SHM
Single
NN, HN, LN,
SNN, SHN
Single
8.75.
10.
Ampere
Rating
List
Price $
Height
(inches)
Filler Plates
For use with Sentron SSP and Type S5
power panels
Breaker
Type
BL, BLH, HBL,
BQD, ED2, ED4,
ED6, HED4,
HED6, HHED6
Filler
Plate
Catalog
Number
List
Price
$
QF3
2.80 per pole
3847.00
MG1D
3317.00
NG1D
3939.00
10
Normal stock item.
cover plate and mounting hardware,
less circuit breaker.
Also fits Types FCI, FCII, SB1 and SB2 switchboards.
800 – 1200 amp units are HCP switch.
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
Note: When a front filler plate is not completely filled with
breakers, the openings in the unused space must be
closed with filler plates selected from this table.
Includes
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-61
Sentron® Panelboards
Modifications and Additions
Selection
Type P5
When required, special constructions
or additions to standard panelboards
may be specified for all factoryassembled Power and Distribution
Panelboards. Below and on the next
page are listed many of those available
for Type S5 panelboards. In no case
do these apply to Narrow (Column)
Width Lighting Panelboards or
Unassembled Panelboards.
1. Type 3R/12
List
Price $
Description
38"
Panelboard Construction: Single Door . . . 1485.
Complete enclosure does not require
a trim.
2. Painted Finish see page 10-72.
3. Miscellaneous Accessories
List
Price $
All
Description
Panels
Nameplate — laminated, engraved . . . .
50.
Tamper-Resistant Screws – per panel . .
70.
7. MLO Compression Lugs —
Aluminum Lugs for Use With
Copper or Aluminum Cable
Available as main lugs and neutral lug.
Price includes required aluminum
compression lugs. See page 10-64.
8. Compression Lugs For Circuit
Breakers — See Section 6.
9. Circuit Breaker Main — With
Vacu-Break Branch Panelboards
Price appropriate main breaker panel,
then add list prices of desired vacu-break
branches and accessories.
10. Vacu-Break Main — With Circuit
Breaker Branch Panelboards
Price appropriate main switch panel, then
add list price of desired circuit breaker
branches and accessories.
11. Grounding of Panelboards
Non-Insulated Equipment Ground Bus
Including Ground Lug . . . . . . .Standard
Insulated Equipment Ground Bus
Including Ground Lug . . .$15. per panel
List
Price $
4. Devices Mounted on Gutter Cover
— Includes Device, Mounting —
Wired or Unwired see page 10-72
Description
5. Feed-Thru Lugs
(One Set Per Panel)
BFI/BFT — Blown Fuse/Blown Fuse Trip
Ampere
Rating
List Price $
400
600
800
1200
245.
455.
615.
765.
Unit Space
(Additional inches)
10
10
17.5
17.5
6. Split Bus
List Price $
2240.
BFI — Blown Fuse
1200.
GF/BFT — Ground Fault &
Blown Fuse Trip
3-Phase 1-Phase MLO
245.
455.
615.
765.
ST W/CPT
800A
1200A
Unit Space
(Additional inches)
1-Phase
3-Phase
570.
655.
700.
740.
1.25
1.25
BFT — Blown Fuse Trip
1985.
GF w/Test Panel
10810.
13. Fuse Clip Provisions
(Add to 250 Volts or 600 Volts Unit
Prices Per Switch)
Ampere
Rating
List Price $ List Price $ List Price $
Class J
Class R
Class T
30
60
100
200
400, 600
55.
55.
85.
85.
85.
55.
55.
85.
85.
85.
N/A
N/A
160.
180.
285.
PANELBOARDS
10
Phases
3180.
10810.
For inches / millimeters conversion, see Application
Data section.
For use on main lug, main breaker or main switch
panels without subfeed breakers.
10-62
For increase in panelboard height — Consult local
sales office. Price includes increased enclosure height
if required.
Ground bar not installed in box. For factory installation,
add $100. List Price per panel.
Price 600 Volt 71/2" high units.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
At 250 Volts — available on 5" unit only.
Class “J” clips not required on 600V twin 200A switch.
Class “R” and “T” clips not available on this switch.
Discount Schedule PBSB
Sentron® Panelboards
Modifications and Additions
Type P5
14. Remote Control Switches
Switch Type
920
911
LEN
Modification
TAKES 20.0 unit space
≤ 800A 25" to unit space
≥ 800A 30" unit space
≤ 60 AMPS 10" unit space
> 60 AMPS 15" unit space
15. Ground Fault on Main Breaker
Ampere
Rating
Description
List
Price $
Fault
Conventional Ground
includes:
Ground Fault Relay, Ground
Sensor, CPT and Shunt Trip 800-1200 7330.
Test and Monitor Panel
1070.
Ground Fault add to Sensitrip
III breaker price (takes 5" of
unit space)
800-1200 2500.
16. Time Clocks
Sangamo, Tork or Paragon time clock
can be supplied, mounted in panelboard
cabinet. For required increase in
enclosure dimensions, consult local sales
office. Price appropriate panelboard, then
add list price below.
Description
List
Price $
Time Clock (one or two pole, single or
double throw contacts; three pole,
single throw) 277V maximum with
plain dial
1070.
Add for —
Astronomical dial
210.
An omitting device
75.
Reserve power or carryover
2450.
Space and mounting provisions only
540.
Selection
19. Main Bus
Standard main bus and ground bus are
tin plated aluminum. For copper main
bus, neutral bus and ground bus add
from the table for each panel. Copper
Neutral Bar $115. List Price.
Main Bus
Catalog
800–1200
Number Ampere $
Silver Plated Copper
E
1220.
1000A per sq. in. Copper D
1070.
750A per sq. in. Aluminum B
645.
20. Copper Lugs —
For Main Lug Only Panels
Standard main lugs and neutral lugs are
tin plated aluminum, UL listed for use
with aluminum / copper cables. Price
below is for one panel and includes
copper lugs for main lugs and neutral lugs,
and must be used with copper cables.
Main Bus
Ampere Rating
List
Price $
800-1200
225.
21. Shunt Trip on Main and Branches
See Breaker Section for list price on this option.
22. Spanner Wrenches
(for Vacu-Break Switches)
Ampere Rating
List
Price $
30-250
460.
23. Alternate Lugs
Style
17. Circuit Breaker Accessories
Handle Blocking Device
Blocks handle in either the “ON” or
“OFF” position — See page 10-73
Padlocking Device — Padlocks in
“OFF” position — See page 10-73
MLO
18. Ground Fault Sensing Relay Kit
Equipment Protection ED Frames
(30 ma) — See page 10-73
Main
Switch
VacuBreak
Amperage
Rating
Alternate Connectors
Box Height
Addition
Price
Addition $
800
(3)#3/0 AWG - 750 Kcmil Cu or Al
Deduct 5.0"
Unit Space
from available
unit space
390.
1000
(4)#3/0 AWG - 750 Kcmil Cu or Al
Deduct 7.5"
Unit Space
from available
unit space
510.
1200
(4)#3/0 AWG - 750 Kcmil Cu or Al
Deduct 7.5"
Unit Space
from available
unit space
510.
400
(1)#3/0 AWG - 750 Kcmil Cu or Al or
(2)#3/0 AWG 250 Kcmil Cu or Al
Deduct 3.75"
Unit Space
from available
unit space
125.
10
Available in 90" high enclosure only. Unit space is
42 1/2" with Test and Monitor Panel; 45" without Test
and Monitor Panel.
Not available on Sensitrip III.
Discount Schedule PBSB
For
required unit space — consult local sales office.
Price includes increased enclosure height if required.
Replace ”A” in position 11 of catalog number.
Shunt Trip on 100A frame breakers increases mounting
height to 6.25" for twin mounting.
Must price “D” or “B” from item #19 above.
See section (6) circuit breakers for 100% rated circuit
breaker requirements.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-63
PANELBOARDS
Panelboards
Modifications and Additions
Selection
24. Compression Lugs
Style
Amp Rating
800
MLO
Breaker Type
Compression Connectors
Box Height Addition
Price Addition $
N/A
(3)#3/0 AWG - 500 Kcmil Cu or Al
Deduct 5.0" Unit Space
from available unit space
3-Phase 4-Wire = $255
3-Phase 3-Wire = $190
1-Phase 3-Wire = $190
2-Wire = $190
3-Phase 4-Wire = $350
3-Phase 3-Wire = $255
1-Phase 3-Wire = $255
2-Wire = $255
1000
N/A
(4)#3/0 AWG - 500 Kcmil Cu or Al
Deduct 5.0" Unit Space
from available unit space
1200
N/A
(4)#3/0 AWG - 500 Kcmil Cu or Al
Deduct 5.0" Unit Space
from available unit space
3-Phase 4-Wire = $350
3-Phase 3-Wire = $255
1-Phase 3-Wire = $255
2-Wire = $255
MD6,
HMD6, CMD6,
SMD6, SHMD6,
SCMD6
(3)#2/0 AWG - 500 Kcmil Cu or Al
0
3-Phase 4-Wire = $305
3-Phase 3-Wire = $235
1-Phase 3-Wire = $235
2-Wire = $235
ND6, HND6,
CND6, SND6,
SHND6,
SCND6
(4)#250 - 500 Kcmil Cu or Al
0
3-Phase 4-Wire = $305
3-Phase 3-Wire = $235
1-Phase 3-Wire = $235
2-Wire = $235
800
Main
Breaker
(S5 Only)
1200
Type 1 Enclosure Modifications and Additions
P5
Panel
Adder $
Description
After Market
Price $
Boxes
PB860
PB875
PB890
PBD860
PBD875
PBD890
P5
P5
P5
P5
P5
P5
box
box
box
box
box
box
38
38
38
38
38
38
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
P5
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
Std
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(4
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
(1
W
W
W
W
W
W
X
X
X
X
X
X
12.75
12.75
12.75
14.50
14.50
14.50
Dp
Dp
Dp
Dp
Dp
Dp
X
X
X
X
X
X
60
75
90
60
75
90
Ht.
Ht.
Ht.
Ht.
Ht.
Ht.
Standard
Standard
Standard
595.
595.
595.
615.
615.
615.
Trims
PANELBOARDS
10
P560V
P575V
P590V
P560NV
P575NV
P590NV
P560VHG
P575VHG
P590VHG
P560NVHG
P575NVHG
P590NVHG
P560VD
P575VD
P590VD
P560NVD
P575NVD
P590NVD
P560VDD
P575VDD
P590VDD
P560NVDD
P575NVDD
P590NVDD
piece trim) vented 60"
piece trim) vented 75"
piece trim) vented 90"
piece trim) unvented 60"
piece trim) unvented 75"
piece trim) unvented 90"
piece trim) vented 60" w/Hinged gutter covers
piece trim) vented 75" w/Hinged gutter covers
piece trim) vented 90" w/Hinged gutter covers
piece trim) unvented 60" w/ Hinged gutter covers
piece trim) unvented 75" w/Hinged gutter covers
piece trim) unvented 90" w/Hinged gutter covers
PC. Door) vented 60" Use 14.5" deep box
PC. Door) vented 75" Use 14.5" deep box
PC. Door) vented 90" Use 14.5" deep box
PC. Door) unvented 60" Use 14.5" deep box
PC. Door) unvented 75" Use 14.5" deep box
PC. Door) unvented 90" Use 14.5" deep box
PC. Door in door) vented 60" Use 14.5" deep box
PC. Door in door) vented 75" Use 14.5" deep box
PC. Door in door) vented 90" Use 14.5" deep box
PC. Door in door) unvented 60" Use 14.5" deep box
PC. Door in door) unvented 75" Use 14.5" deep box
PC. Door in door) unvented 90" Use 14.5" deep box
Standard
Standard
Standard
290.
290.
290.
290 .
290 .
290 .
170.
170.
170.
170 .
170 .
170 .
360.
360.
360.
360 .
360 .
360 .
615.
645.
670.
615.
645.
670.
910.
935.
965.
910.
935.
965.
730.
760.
785.
730.
760.
785.
1090.
1115.
1140.
1090.
1115.
1140.
Flush Mounting Kits
F860
F875
F890
Flush kit for P5 60" Ht.
Flush kit for P5 75" Ht.
Flush kit for P5 90" Ht.
140.
140.
140.
—
—
—
140.
140.
140.
Type 3R/12
WP860
WP875
WP890
Required
P5 3R/12 60"
P5 3R/12 75"
P5 3R/12 90"
with door over breaker handles.
trims require amps per square inch bussing.
Un-vented
10-64
Requires
No
14.5 deep box.
adder if ordered at time of order entry.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Type P5 Panelboards
Dimensions
Type 1 Box
Box is symmetrical
Box To Wall
Mounting Holes
Recommended Conduit Area
4.375 in.
[ 111 ]
6.635 in.
[ 169 ]
10.0 in.
[ 254 ]
36.0 in.
[ 914 ]
Interior To Box
Mounting
Stubs
햲
60 in., 75 in., 90 in.
[ 1524 ] [ 1905 ] [ 2286 ]
6.635 in.
[ 169 ]
24 in.
[ 610 ]
12.75 in.
[ 324
4.375 in.
[ 111 ]
30 in.
[ 762 ]
햲
38 in.
[ 965 ]
햲
Type 3R and 3R/12 Box
15.88 in.
[ 403 ]
.375 in.
[ 10 ]
15.81 in.
[ 402 ]
Mounting
Bracket
햲
60 in., 75 in., 90 in.
[ 1524 ] [ 1905 ] [ 2286 ]
.375 in.
[ 10 ]
15.81 in.
[ 402 ]
38 in. 햲
[ 965 ]
.87 in.
[ 22 ]
14.25 in.
[ 362 ]
10
40 in.
[ 1016 ]
햲
PANELBOARDS
42 in.
[ 1067 ]
햲 Dimensions
are interior of the box. Add 5/8" to width for absolute
dimension. Add 1/8" to height for absolute dimension.
Dimensions shown in inches and millimeters [ ].
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-65
Panelboards
Circuit Breaker / Column Type
General
Type C1
240 Volts AC Maximum
250 Ampere Mains
250 Ampere Maximum Branch
UL Short Circuit Rating —
200,000 IR Maximum
Branch Breaker Symmetrical
Interrupting Rating
Based on Underwriters’ Test Procedure
Type C2
480Y/277 Volts AC Maximum
250 Ampere Mains
250 Ampere Maximum Branch
UL Short Circuit Rating —
100,000 IR Maximum
Meets 2002 NEC wire bending
requirement, section 312–6.
Panelboards
Listed by Underwriter’s Laboratories,
Inc., under “Panelboards” File #E2269.
Meets Federal Specification
W–C375B/Gen.
Service
240 Volts Maximum. 1-Phase, 3-Wire, or
3-Phase, 4-Wire.
Boxes
C1 — 75⁄8" wide, 53⁄4" deep.
C2 — 81⁄2" wide, 53⁄4" deep.
Branch Breaker Side Gutters
Type
Circuit
Breaker
C1
BL, BLH, HBL, BQD
3.505
C2
BQD
3.5
Weight–Approximate
Total panelboard weight when filled with
a normal quantity of breakers and
accessories is:
*About 3 lbs. per inch of box height.
Gauge Steel Boxes
Type
Width
Height
Gauge Steel
C1
75⁄8"
48", 73", 85"
#14
C2
81⁄2"
48", 73", 85"
#14
C1
75⁄8"
48", 73", 85"
#14
C2
81⁄2"
48", 73", 85"
#14
Fronts
Main Breaker Connectors
Panelboards Fronts and Doors
Standard panelboards are furnished with
trim with a flush door lock. All are factory
assembled for ease of installation. Fronts
are fabricated from code gauge steel and
finished ANSI-61.
Main Breakers C1
BL, BLH and HBL frame breakers are
mounted horizontally. All other frames
are mounted vertically.
Side Gutter
(inches)
Ampere
Rating
Connectors suitable for Cu or Al
100
(1) #14–1/0 AWG
125
(1) #4–1/0 AWG
225
(1) #6 AWG–300 kcmil
250
(1) #4 AWG–350 kcmil Al
(1) #6 AWG–350 kcmil Cu
Main Lug Connectors
125
(1) #6 AWG–350 kcmil
250
(1) #6 AWG–350 kcmil
PANELBOARDS
10
Main Breakers C2
BQD frame breakers are mounted
horizontally. All other frames are
mounted vertically.
For inches / millimeters conversion, see Application Data section.
햲
Connector ranges indicated do not apply to all main
breaker types. Refer to molded case circuit breaker
standard pressure wire connectors in the breaker
section of this catalog for the wire ranges for a specific
breaker frame.
10-66
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Series Connected Short Circuit Ratings
The term “Series Connected Short
Circuit Rating” refers to the application
of series connected circuit breakers in a
combination that allows some circuit
breakers to have lower individual
interrupting ratings than the available
fault current. This is permitted as long as
the series combination has been tested
and certified by UL.
The table below lists specific main and
branch breaker series combinations that
are marked on all C1 panels. All
combinations shown have been tested
for use in C1 panelboards and are UL
Listed. Other combinations are available.
See series rating information in the
Circuit Breaker Section, pages 6-146 to
6-150. Ratings other than those shown
below must be specified at the time of
order entry.
Panelboards
Circuit Breaker / Column Type
Selection
Main Lugs Only C1
Maximum
Panel
Ampere Rating
125
250
240 Volts Maximum
Maximum
1-Pole
Circuits
18
30
42
18
30
42
Box
Height
(inches)
48
73
85
48
73
85
208Y/120V
3-Phase, 4-Wire
Catalog Number
C1C18ML125CTS
C1C30ML125CTS
C1C42ML125CTS
C1C18ML250CTS
C1C30ML250CTS
C1C42ML250CTS
List
Price $
1030.00
1250.00
1440.00
1100.00
1290.00
1520.00
120/240V
1-Phase, 3-Wire
Catalog Number
C1A18ML125CTS
C1A30ML125CTS
C1A42ML125CTS
C1A18ML250CTS
C1A30ML250CTS
C1A42ML250CTS
48
73
85
48
73
85
48
73
85
48
73
85
C1C18BL100CTS
C1C30BL100CTS
C1C42BL100CTS
C1C18E4125CTS
C1C30E4125CTS
C1C42E4125CTS
C1C18QJ225CTS
C1C30QJ225CTS
C1C42QJ225CTS
C1C18FX250CTS
C1C30FX250CTS
C1C42FX250CTS
1360.00
1570.00
1840.00
1910.00
2110.00
2390.00
2540.00
2750.00
2950.00
2950.00
3140.00
3350.00
C1A18BL100CTS
C1A30BL100CTS
C1A42BL100CTS
C1A18E4125CTS
C1A30E4125CTS
C1A42E4125CTS
C1A18QJ225CTS
C1A30QJ225CTS
C1A42QJ225CTS
C1A18FX250CTS
C1A30FX250CTS
C1A42FX250CTS
Main Circuit Breaker C1
240 Volts Maximum
18
30
42
18
30
42
18
30
42
18
30
42
100
125
225
250
List
Price $
1190.00
1170.00
1370.00
1010.00
1200.00
1420.00
Main Lugs Only C2
1250.00
1440.00
1660.00
1790.00
2020.00
2200.00
2150.00
2350.00
2550.00
2550.00
2760.00
2960.00
480Y/277 Volts Maximum
Maximum
Panel
Ampere Rating
125
250
Maximum
1-Pole
Circuits
18
30
42
18
30
42
Box
Height
(inches)
48
73
85
48
73
85
480Y/277V
3-Phase, 4-Wire
Catalog Number
C2E18ML125CTS
C2E30ML125CTS
C2E42ML125CTS
C2E18ML250CTS
C2E30ML250CTS
C2E42ML250CTS
18
30
42
18
30
42
18
30
42
18
30
42
48
73
85
48
73
85
48
73
85
48
73
85
C2E18BD100CTS
C2E30BD100CTS
C2E42BD100CTS
C2E18E4125CTS
C2E30E4125CTS
C2E42E4125CTS
C2E18FX225CTS
C2E30FX225CTS
C2E42FX225CTS
C2E18FX250CTS
C2E30FX250CTS
C2E42FX250CTS
Main Circuit Breaker C2
100
125
225
250
List
Price $
1030.00
1260.00
1440.00
1100.00
1290.00
1520.00
480Y/277 Volts Maximum
1710.00
1930.00
2190.00
1910.00
2110.00
2390.00
2710.00
2980.00
3240.00
2950.00
3140.00
3350.00
Alternate Main Breaker Selection C1
Ampere
Rating
100
125
225
225
250
Breaker
Type
BL
BLH
HBL
ED4
HED4
QJ2
QJH2
QJ2-H
FXD6
HFD6
FXD6
HFD6
Maximum
Interrupting
Rating (KA)
10
22
65
65
100
10
22
42
65
100
65
100
Catalog
Number
BL
LH
HL
E4
H4
QJ
QH
Q2
FX
HF
FX
HF
List
Price $
STD
65.
405.
STD
540.
STD
100.
160.
140.
1760.
STD
1900.
Available Trip Values
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100, 110, 125
50, 60, 70, 80, 90, 100, 110, 125
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
250
250
10
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
Discount Schedule PBSB
BL, BLH, HBL and BQD are horizontally mounted.
All others vertically mounted.
Interchangeable trip breakers such as FD6 and HFD6
cannot be back fed. Must be top feed only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-67
Panelboards
Circuit Breaker / Column Type
Selection
Branch Breaker Selection C1
Breaker
Type
BL (120V)
BL (HID)
BLF (GFCI)
BLE (EQGFI)
BGL (SWN)
BLR (240V)
BLH (120V)
BLHF (GFCI)
HBL
BQD
Available
Ampere
Rating
15, 20, 30,
70
70, 80, 90,
15, 20, 30
15, 20, 30
40, 50, 60
15, 20, 30
15, 20, 30
15, 20, 30,
70, 80, 90,
15, 20, 30,
70
70, 80, 90,
15, 20, 30
40, 50, 60
15, 20, 30,
60, 70, 80,
15, 20, 30,
70, 80, 90,
1-Pole
25.
35.
—
55.
140.
—
220.
—
—
—
35.
75.
—
155.
—
65.
—
85.
200.
2-Pole
45.
85.
140.
80.
240.
250.
330.
100.
105.
185.
85.
130.
200.
270.
291.
150.
400.
270.
400.
3-Pole
140.
190.
210.
—
—
—
—
130.
—
—
220.
300.
310.
—
—
290.
480.
290.
480.
Provisions
for
Future $
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—–
—–
—–
—–
—–
—–
—–
—–
—–
420.
750.
690.
1270.
420.
930.
1080.
1220.
2440.
540.
910.
910.
1450.
880.
1140.
1410.
1540.
3010.
100.
100.
100.
100.
150.
150.
150.
200.
200.
List Price Installed $
40, 50, 60
100
40, 50, 60
100
40, 50, 60
100
40, 50
90, 100
40, 50, 60
100
Maximum Interrupting
Rating (kA)
120V
—
—
—
—
10
10
10
10
—
—
—
—
—
—
—
—
—
—
—
120/240V
10
10
10
—
—
—
—
—
—
—
22
22
22
22
22
65
65
—
—
240V
—
—
—
—
—
—
—
—
10
10
—
—
—
—
—
65
65
65
65
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
65
65
65
100
10
22
42
65
100
Subfeed Breakers — Limit One Per Panel C1
ED4
HED4
QJ2
QJH2
QJ2-H
FXD6
HFD6
15, 20, 30,
110, 125
15, 20, 30,
110, 125
60, 70, 80,
60, 70, 80,
60, 70, 80,
70, 80, 90,
70, 80, 90,
40, 50, 60, 70, 80, 90, 100
40, 50, 60, 70, 80, 90, 100
90, 100, 110, 125, 150, 175, 200, 225
90, 100, 110, 125, 150, 175, 200, 225
90, 100, 110, 125, 150, 175, 200, 225
100, 110, 125, 150, 175, 200, 225, 250
100, 110, 125, 150, 175, 200, 225, 250
Alternate Main Breaker Selection C2
Ampere
Rating
Breaker
Type
BQD
ED4
ED6
HED4
HHED6
ED4
ED6
HED4
HHED6
FXD6
HFD6
FXD6
HFD6
100
125
225
250
Catalog
Number
BD
E4
E6
H4
H6
E4
E6
H4
H6
FX
HF
FX
HF
IR
14
18
25
42
65
18
25
42
65
35
65
35
65
List
Price $
STD
55.
65.
290.
390.
STD
25.
290.
390.
STD
1760.
STD
1760.
Available Trip Values
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
50, 60, 70, 80, 90, 100
110, 125
110, 125
110, 125
110, 125
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
70, 80, 90, 100, 110, 125, 150, 175, 200, 225
250
250
Branch Circuit Breakers C2
Breaker
Type
BQD
Available
Ampere
Rating
15, 20, 30, 40, 50, 60
70, 80, 90, 100
1-Pole
85.
200.
2-Pole
270.
400.
3-Pole
290.
480.
Provisions
for
Future $
—–
—–
—–
—–
—–
—–
—–
—–
—–
—–
420.
750.
530.
1090.
690.
1270.
1220.
2440.
540.
910.
860.
1090.
910.
1450.
1540.
3010.
100.
100.
100.
100.
100.
100.
200.
200.
List Price Installed $
Maximum Interrupting
Rating (kA)
277V
14
14
480/277V
14
14
480V
—
—
—
—
—
—
—
—
—
—
18
18
—
—
—
—
—
—
18
18
25
25
42
42
35
65
Subfeed Breakers — Limit One Per Panel C2
ED4
PANELBOARDS
10
ED6
HED4
FXD6
HFD6
15, 20, 30,
110, 125
15, 20, 30,
110, 125
15, 20, 30,
110, 125
70, 80, 90,
70, 80, 90,
40, 50, 60, 70, 80, 90, 100
40, 50, 60, 70, 80, 90, 100
40, 50, 60, 70, 80, 90, 100
100, 110, 125, 150, 175, 200, 225, 250
100, 110, 125, 150, 175, 200, 225, 250
No increase in box height. Space is already built into
C1 panel.
BL, BLH, HBL and BQD are horizontally mounted.
All others vertically mounted.
10-68
Interchangeable
trip breakers such as FD6 and HFD6
cannot be back fed. Must be top feed only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Sentron® Panelboards
Circuit Breaker / Column Type, Modifications and Additions
Selection
Type C1/C2
When required, special constructions or
additions to standard panelboards may
be specified for factory-assembled
column panelboards.
Box Modifications
Description
List
Price $
Gasketed
Metal Card Holder
Welded Metal Card Holder
Nameplate
Al Ground Bar
Cu Ground Bar
Insulated Al Ground Bar
Insulated Cu Ground Bar
670.
65.
125.
55.
STD
40.
40.
75.
Interior Modifications
Box Sizing Chart
Certain modifications such as subfeed
breakers and feed-thru lugs require
additional unit space. Use this chart to
determine proper enclosure size.
Panel Configuration
Box
Height
(inches)
All MLO 18 Circuit
All MLO 30 Circuit
All MLO 42 Circuit
48
73
85
All MLO 18 Circuit with feed-thru lugs
All MLO 30 Circuit with feed-thru lugs
All MLO 42 Circuit with feed-thru lugs
73
85
85
All MLO 18 Circuit with subfeed breaker
All MLO 30 Circuit with subfeed breaker
73
85
Description
List
Price $
All Main Breaker 18 Circuit
All Main Breaker 30 Circuit
All Main Breaker 42 Circuit
48
73
85
Feed-Thru Lugs
Cu Neutral Lugs
Cu main Lugs 125A
Cu main Lugs 250A
180.
110.
115.
190.
All Main Breaker 18 Circuit with feed-thru lugs
All Main Breaker 30 Circuit with feed-thru lugs
All Main Breaker 42 Circuit with feed-thru lugs
73
85
85
All Main Breaker 18 Circuit with subfeed breaker 73
All Main Breaker 30 Circuit with subfeed breaker 85
Column Extension
Available in various standard lengths,
extensions are 51⁄4 inches deep and
7 inches wide.
Height (inches)
Catalog Number List Price $
14
20
26
32
38
41
44
53
56
62
65
68
74
80
86
LXX-14
LXX-20
LXX-26
LXX-32
LXX-38
LXX-41
LXX-44
LXX-53
LXX-56
LXX-62
LXX-65
LXX-68
LXX-74
LXX-80
LXX-86
150.00
160.00
180.00
180.00
210.00
210.00
235.00
255.00
275.00
285.00
305.00
305.00
330.00
360.00
380.00
Pull Boxes
Two styles of pull boxes are available,
top and front mounted. When the panel
and its extensions are mounted in a
structural WF beam a front mounted pull
box is required. When the panels are
surface mounted, a top mounted pull box
may be used. Provisions are made so
that the neutral bar may be mounted in
the pull box when required.
(Front mounted pull box dimensions are
14" H. X 20" W.)
Description
Catalog Number List Price $
Top Mount
Front Mount
LXXP-T
LXX50-F
180.00
445.00
10
PANELBOARDS
For inches / millimeters conversion, see Application Data
section.
Discount Schedule PBSB
Includes
50" extension. Price additional extensions
from above.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-69
Sentron Panelboards
®
Telephone and Equipment Cabinets
Selection/Dimensions
Telephone and Equipment Cabinets: Conform to requirements of Underwriters’
Laboratories, Inc., for all cabinets and boxes bearing their label. Surface and Flush
enclosures: box and front constructed of code-gauge steel, box galvanized and front
only finished with light gray, ANSI-61.
Boxes: Standard construction has blank end walls, without knockouts.
Fronts: Siemens Fas Latch fronts feature concealed hinges and fastening screws. Match
P1 and P2 Panels in appearance. Two locks supplied on doors more than 51 inches high.
Cabinets
Dimensions
(inches)
Height
Width
Depth
Catalog
Number
List Price $
Without
Backboard
List Price $
With
Backboard
With FAS Latch Front
23
20
5.75
TC 햲 23B
300.
350.
26
20
5.75
TC 햲 26B
320.
370.
29
20
5.75
TC 햲 29B
340.
390.
32
20
5.75
TC 햲 32B
360.
410.
35
20
5.75
TC 햲 35B
380.
430.
38
20
5.75
TC 햲 38B
400.
450.
41
20
5.75
TC 햲 41B
420.
470.
44
20
5.75
TC 햲 44B
440.
490.
47
20
5.75
TC 햲 47B
460.
510.
50
20
5.75
TC 햲 50B
480.
530.
53
20
5.75
TC 햲 53B
500.
550.
56
20
5.75
TC 햲 56B
520.
570.
59
20
5.75
TC 햲 59B
540.
590.
62
20
5.75
TC 햲 62B
560.
610.
65
20
5.75
TC 햲 65B
580.
630.
23
24
5.75
TC W 햲 23B
420.
470.
29
24
5.75
TC W 햲 29B
460.
510.
35
24
5.75
TC W 햲 35B
500.
550.
38
24
5.75
TC W 햲 38B
520.
570.
41
24
5.75
TC W 햲 41B
540.
590.
44
24
5.75
TC W 햲 44B
560.
610.
53
24
5.75
TC W 햲 53B
620.
670.
59
24
5.75
TC W 햲 59B
640.
690.
PANELBOARDS
10
Dimensions
For inches / millimeters conversion, see Application Data
section.
10-70
햲
Add S for Surface, F for Flush.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Sentron Panelboards
®
Enclosure Modifications
Dimensions
H
23
26
29
32
35
38
41
44
47
50
53
56
59
62
65
68
71
74
77
Customer Relay Cabinets
Catalog
D
Number
5.75
RC(1)23B
5.75
RC(1)26B
5.75
RC(1)29B
5.75
RC(1)32B
5.75
RC(1)35B
5.75
RC(1)38B
5.75
RC(1)41B
5.75
RC(1)44B
5.75
RC(1)47B
5.75
RC(1)50B
5.75
RC(1)53B
5.75
RC(1)56B
5.75
RC(1)59B
5.75
RC(1)62B
5.75
RC(1)65B
5.75
RC(1)68B
5.75
RC(1)71B
5.75
RC(1)74B
5.75
RC(1)77B
W
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Selection
List
Price $
355.00
378.00
386.00
394.00
401.00
562.00
594.00
594.00
604.00
625.00
636.00
647.00
678.00
700.00
753.00
784.00
827.00
859.00
912.00
Note: Replace (1) with ”S” for surface applications and ”F” for flush applications.
Dimensions
H
23
26
29
32
35
38
41
44
47
50
53
56
59
62
65
68
71
74
77
W
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
Customer Relay Cabinets
Catalog
D
Number
5.75
RCW(1)23B
5.75
RCW(1)26B
5.75
RCW(1)29B
5.75
RCW(1)32B
5.75
RCW(1)35B
5.75
RCW(1)38B
5.75
RCW(1)41B
5.75
RCW(1)44B
5.75
RCW(1)47B
5.75
RCW(1)50B
5.75
RCW(1)53B
5.75
RCW(1)56B
5.75
RCW(1)59B
5.75
RCW(1)62B
5.75
RCW(1)65B
5.75
RCW(1)68B
5.75
RCW(1)71B
5.75
RCW(1)74B
5.75
RCW(1)77B
List
Price $
372.00
396.00
402.00
411.00
419.00
583.00
615.00
615.00
636.00
647.00
657.00
678.00
710.00
721.00
795.00
816.00
869.00
890.00
943.00
List Price includes Fas latch trim and steel mounting pan. If 2 or more cabinets are to be
stacked, specify on order (no extra charge for connecting hardware).
Additional Enclosures Modifications
Description
List Price $
Strip Heaters
910.
Humidstat control
1600.
Thermostat control
1600.
Ampere
Rating
20
30
60
75
100
150
200
225
260
300
400
600
800
1000
1200
ASCO #920
Mechanically held
List Price $
2-Pole
3-Pole
—
—
2680.
3075.
3360.
4315.
3360.
4315.
3795.
4940.
5215.
6615.
5970.
7430.
6455.
8090.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ASCO #911 — 3-poles
Mechanically held remote control switch suitable for all
classes of loads (Total system loads). Voltage rated
to 480V AC, UL listed.
List Price $
—
—
—
—
7015.
9475.
—
—
19400.
26935.
44520.
44520.
46270.
60270.
65530.
Siemens LEN
Electrically Held
List Price $
2-Pole
—
1270.
1580.
—
2055.
3360.
3360.
—
—
—
—
—
—
—
—
3-Pole
—
1495.
1920.
—
2415.
4015.
4015.
—
—
—
—
—
—
—
—
Application (See individual panel sections for application information)
Control Power Transformer
Remote Control Switch Modification
VA
50
75
150
250
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-71
PANELBOARDS
Discount Schedule PBSB
490.
850.
Size
0,1
2
3
4
List
Price
Adder $
245.
350.
510.
625.
10
Description
Separate Door in Dead Front Over
Switch (P2 as main only)
Auxiliary Contacts (Mounted Not Wired) Ea.
2-Wire Control (add 6" to panel height.)
List
Price
Adder $
410.
Panelboards
Modifications and Additions
Selection
End Walls Only for 5.75 in. Deep Box End Walls Only for 7.75 in. Deep Box
With knockouts
Blank
$30. List Each
20. List Each
With knockouts
Blank
Miscellaneous
$40. List Each
30. List Each
Description
Conduit Hubs — Up to
1 1/2 in. Each
2 in. to
2 1/2 in. Each
3 in. Each
Standard Enclosures Made From Special
Materials - Type P1, P2, P3
Aluminum, Stainless Steel, and Chrome Plated Enclosures.
Price standard panelboard and add from the following table.
Material
Panel Over 20 in.
60.
60.
90.
110.
90.
110.
Increased Gauge Steel - 10 gauge Maximum
Box and Front
Box or Front Only
265.
185.
List Price $
Up to 20 in. W
Over 20 in. W
1185.
1540.
1045.
1845.
1920.
3440.
1540.
2570.
1845.
3045.
2600.
5000.
Front And Door Modifications
1450.
Vault Handle
Cutout in Trim햳
Two Panels with Common Trim햴
265.
185.
Painted Finish
Aluminum
Box
Front
Box
Front
Alumite
Mill Finish
Set-up Charge Net
Box Only
Alternate Color Trim
Template Must Accompany Order
General Purpose
Grade (Brush Front)
Box
Front
Chrome Plate
Polished Finish
Front Only
1185.
90.
480.
250.
340.
햲 Panels
Addition Width
Width
Per 2"
85.
30.
30.
Special Drillings
Stainless Steel
햳
햴
Lighting Panel
205
Distribution Panels
350
Consult factory for dimension limitations.
Addition Depth
Depth
Per 2"
List Price $
Panel Width 20 in.
Lighting Panel
150
Devices Mounted On Trim-Includes
Device, Mounting (Wired or Unwired)
Toggle Switch-SPST or 3-way; 15A, 277 V Maximum
First Switch
Each Additional
Pilot Light-General Purpose, Neon or Incandescent
First Light
Each Additional
Pushbutton
First Device
Each Additional
350.
210.
350.
210.
350.
210.
PANELBOARDS
10
Consult factory for dimension limitations.
Distribution Panels
250
having doors over 48 in. high, 2 locks are standard.
Voids UL label.
Lighting panels only. Field must supply dimensional information and panel
orientation.
10-72
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PBSB
Panelboards
Circuit Breaker Accessories and Modifications
Blank Plates—Vacu-Break
For use with VB-23, VB-30, VB-32 and Uni-Power
Switchboards
12 in. Units—23 in. Wide
Enclosures Only
17 in. Units—30 in. and
32 in. Wide Enclosures
Catalog
Number
List
Price $
Catalog
Number
List
Price $
2 1/2
5
VB2F025
VB2F050
121.00
139.00
VB7F025
VB7F050
163.00
163.00
7 1/2
10
VB2F075
VB2F100
139.00
163.00
VB7F075
VB2F100
181.00
163.00
Unit Height
(in.)
Conduit Enclosing Shield (Panel Skirts)
Sheet metal to cover conduits above or below a standard
panelboard box.
Skirt Length
8, 9, 11, 12
14, 17, 18, 23,
26, 27, 28, 29,
32, 33, 34, 35,
37, 38, 39, 40,
8, 9, 11, 12
14, 17, 18, 23,
26, 27, 28, 29,
32, 33, 34, 35,
37, 38, 39, 40,
25
30, 31,
36
41, 42, 43, 44
25
30, 31,
36
41, 42, 43, 44
Width
List Price $
4 Side Adder $
20.00
20.00
125.
225.
110.
110.
20.00
320.
110.
20.00
24.00
24.00
405.
200.
320.
110.
145.
145.
24.00
435.
145.
24.00
530.
145.
Selection
Molded Case Switches
(Non-Automatic Circuit Interrupters)
When Molded case switches are substituted for thermal
breakers deduct from the installed thermal breaker price:
Ampere
Rating
Breaker
Frame
100
ED2
ED4
ED6
225
QJ2
60.
35.
250
FXD6
200.
170.
400
JXD2
JXD6
405.
455.
325.
370.
3-Pole
Number of Poles
2-Pole
95.
95.
95.
75.
80.
85.
600
LXD6
760.
590.
800
MD6
1790.
1350.
1200
ND6
3650.
NA
Panel Skirts Standard Length
3 Sides Open Back
4 Sides Screw Front
8, 9, 10,11, 12, 14, 17, 18, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
35, 36, 37, 38, 39, 40, 41, 42, 43, 44
10
PANELBOARDS
Discount Schedule PBSB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-73
PANELBOARDS
10
Notes
10-74
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11SPEEDFAX
TM
2007-2008 Lighting Controls
11
Contents
11-2
LCP300EZ Catalog Numbering System & Accessories
11-3
LCP300EZ Accessory Options
LCP300EZ Device Descriptions
LCP3000EZ LAN Software (ComBridge Studio)
LCP3000EZ Wiring Diagrams
LCP3000EZ Other Applications
Benefits of Lighting Control Systems
The benefits of lighting control systems include enhanced comfort,
productivity, security, environmental aesthetics and of course, energy
savings. In terms of energy savings, many lighting control systems can
easily pay for themselves in less than two years.
Siemens has developed a new lighting control system which is simple in
both design and installation. It efficiently covers a complex range of
lighting schemes with a minimal investment of time and money.
The Siemens LCP3000EZ Lighting Control Systems has been designed
to make lighting control genuinely accessible for any building, whether
the need is a single ON-OFF panel, or a complicated fully networked
system of control panels sequencing on-off schemes across a hundred
floors. In short, lighting control is something you can do quickly
and affordably.
For production details and pricing, please contact your nearest
local Siemens sales office or contact the Siemens Call Center
at 1-800-427-2256 for technical information.
Code Requirements
ANSI/ASHRAE/IESNA require positive lighting control beyond the
historical light switch and circuit breaker disconnect panel. The code
states: Interior lighting in non-residential buildings larger than 5000
square feet and not in operation 24 hours a day shall be controlled with
an automatic control device to shut off building lighting in all spaces.
This automatic control device shall function on a scheduled basis or an
occupancy sensor or a signal from an other control or alarm system.
The LCP3000EZ is California Title 24 Certified.
Residential Commercial Industrial
11-4
11-5 – 11-6
11-7 – 11-8
11-9 – 11-10
11-11
LIGHTING
CONTROLS
LCP3000EZ Panels
Lighting Controls
LIGHTING
CONTROLS
11
LCP3000EZ Panels
System Features
The Siemens LCP3000EZ is fully
assembled and delivered with all
specified relays, digital inputs, power
supply and RS232 interface installed in
the enclosure. Wall mount the enclosure.
Connect the 120V AC power supply.
connect the loads to the relays. Connect
the inputs. Then with a PDA with serial
port support (RS232) (running Palm OS
3.5 or higher), configure which inputs
control which output/s (relay/s) and the
system is ready to go. The configuration
software also can be run on a PC using
Palm Emulator software. The
configuration software and the Palm
Emulator are provided with every order
at no charge.
If your system has more than one panel,
simply interconnect the panels with an
18 AWG solid copper twisted pair.
The Siemens LCP3000EZ lighting
control system comes with an
System Specifications
▪ NEMA 1, surface mount,
optional key lock and flush mount kit
▪ Enclosures are always 20" wide and
53⁄4" deep; height depends on
number of outputs:
- 24" high for up to 16 outputs
- 32" high for up to 32 outputs
- 40" high for up to 48 output relays
▪ Load relays:
- Mechanically held
- Visual position indicator
- Have manual override
- Built in timer which can be set in
30 minute intervals up to 6 hours
- Eight relays per module
- Can be programmed as groups to
control two or three pole loads
11-2
General
abundance of standard operating
features and the intelligence to meet
virtually any lighting control application.
Each panel is equipped with an RS232
interface for easy configuration of inputs
and outputs. Any panel in the network
can be configured from any other panel
in the same network. Other options
include Ethernet interface, PC software,
two different time clocks (4 and 16
control points, which provide the ability
to set 324 or 500 schedules
respectively), motion sensors, dual
sensors for light and temperature and
more. These options enable you to have
a lighting control system that can meet
even the most demanding applications.
Each individual device holds its own
operating program in non-volatile
memory. There is no central or master
controller. This feature prevents entire
system shut down, which could happen
on systems with a central logic board.
Networking
Up to 10 panels can be networked
together without the need for any
additional cards or devices. With
optional Web access devices and
ComBridge Studio Software, the user
can network up to 500 panels. The
LCP3000EZ interfaces with any Building
Automation System using OPC.
Web Access Software
The optional Web access software allows
the user access any device in the
LCP3000EZ system. This allows control of
- Are rated 20 Amp, 277 Volt (480V
“Y” with ground three phase loads)
▪ All panel size accept a maximum of
32 digital (switch) inputs:
- Rated 24V AC/DC
- Can be configured to accept
maintained, or momentary inputs
- Four inputs per module
▪ 4 control channels time clock allows
324 schedules
▪ 16 control channels time clock allows
500 schedules. Four channels have
astronomical clock feature
- Both time clocks have 10 years
battery back up
- Automatic day light savings time
adjustment
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
any relay from a PC. Password protection
allows partial control to individual users.
For example, the employee can turn ON
or OFF the office lights from any PC.
Enclosure
The LCP3000EZ is enclosed in a NEMA
1, UL listed enclosure with hinged door
and hinged dead fronts. There are two
dead fronts, one for the low voltage
(24V) section and one for the line
voltage load relays. There is a barrier
between the two sections.
Technical Literature
You are able to review and download a
copy of the LCP3000EZ Lighting Control
Selection and Application Guide at
http://www.sea.siemens.com/power/pr
oduct/pdprodlc_3000ez.html. A printed
version of the Selection and Application
Guide, No. LCSA-03000-0604, or the
Technical Data Sheet, No. LCSS-010020304, can be requested through the
Siemens Call Center at 1-800-427-2256.
▪
▪
▪
▪
- Time of day (TOD) schedules
- Warn Off - 5 minutes
RS-232 interface in every panel
Network up to 10 panels twisted pair
wire, without additional cards
Network up to 500 panels with
optional Web access devices and
ComBridge Studio Software
Ambient Conditions:
- Ambient operating temperature:
23˚F - 113˚F (-5... +45˚C)
- Ambient temperature (non-op):
-13˚F - 158˚F (-25... +70˚C)
- Relative Humidity
(non-condensing): 5% to 93%
Lighting Controls
LCP3000EZ
Accessories
LCP3000EZ Catalog Numbering System
-Z
LIGHTING
CONTROLS
Enclosure Height
3 = 24" (up to 16 relays = 2 output (relay) modules)
4 = 32" (up to 32 relays = 4 output (relay) modules)
5 = 40" (up to 48 relays = 6 output (relay) modules)
Panel Designation
A, B, C, D, E, F,
G, H, J or K
Number of Input Modules
Select 0, 8, 16, 24 or 32
inputs. Divide the number of
inputs by 8 to get the number
to enter at this location.
i.e. 24 inputs / 8 = 3.
To format the LCP3000EZ catalog
number proceed as follows:
1. Enclosure Height: Determine the
number of relays and provisions for
future relay additions your installation
requires. Round the number up to the
nearest multiple of 8 (relays come in
blocks of 8 relays).
- 8 to 16 outputs (relays) enclosure
height is 24". Enter 3 in the
Enclosure Height field
- 24 to 32 outputs (relays) enclosure
height is 32". Enter 4 in the
Enclosure Height field
- 40 to 48 outputs (relays) enclosure
height is 40". Enter 5 in the
Enclosure Height field
2. Panel designation: First panel is A,
second panel is B, third panel is C, etc.
Last panel is K. There is no Panel I.
3. Number of input Modules:
Determine the number of inputs your
system requires and round the number
up to the nearest multiple of 8 (input
modules are packaged as 2 blocks of 4;
therefore, they are supplied in groups of
8). Divide the number of inputs by 8 to
determine the number of input modules:
- 8 inputs: enter 1 in the Number of
Input Modules field
- 16 inputs: enter 2 in the Number of
Input Modules field
- 24 inputs: enter 3 in the Number of
Input Modules field
- 32 inputs: enter 4 in the Number of
Input Modules field
4. Number of output (relay) modules:
Determine the number of relays, and
provisions for future relay additions your
installation requires; then round the
number up to the nearest 8 (relays come
in blocks of 8 relays). Divide the number
of relays by 8 to determine the number
of output (relay) modules:
11
Catalog No. 5WG1 70 -8X
Number of Output Modules
1 to 6 (8 outputs per module;
i.e. 48 outputs / 8 outputs per
module = 6 output modules).
- 8 relays: enter 1 for Number of
Output (relay) Modules field
- 16 relays: enter 2 in the Number
Output (relay) Modules field
- 24 relays: enter 3 in the Number
Output (relay) Modules field
- 32 relays: enter 4 in the Number
Output (relay) Modules field
- 40 relays: enter 5 in the Number
Output (relay) Modules field
- 48 relays: enter 6 in the Number
Output (relay) Modules field
Enclosure Options
Blank = None
1 = Flush Mounting Kit
2 = Key Lock
3 = Key Lock and Flush Mounting Kit
32/8 = 4. Enter 4 in the Number of Output
(relay) Modules field.
of
of
of
of
of
5. Enclosure options: Determine if key
lock, flush mounting kit of both are
required.
- No option required: leave the
Enclosure Options field blank
- Flush mount kit: enter 1 in the
Enclosure Options field
- Key lock: enter 2 in the Enclosure
Options field
- Key lock and flush mount kit: enter 3
in the Enclosure Options field
Example:
A system needs two panels:
The first panel requires 20 inputs and 30
outputs (relays).
The second panel requires 31 inputs and
44 outputs (relays).
Key lock is required in both panels.
First Panel:
1. Enclosure height: Number of outputs
(relays) = 30, round up to the nearest
multiple of 8 which is 32. 32/8 = 4. Enter 4
in the Enclosure Height field.
2. Panel designation: This is the first panel.
Enter A in the Panel Designation field.
3. Number of input modules: Number of
inputs = 20, round up to the nearest
multiple of 8 which is 24. 24/8 = 3. Enter 3
in the Number of Input Modules field
4. Number of output (relay) modules:
Number of relays = 30 round up to the
nearest multiple of 8 which is 32.
Second Panel:
5. Enclosure height: Number of outputs
(relays) = 44, round up to the nearest
multiple of 8 which is 48. 48/8 = 6. Enter 5
in the Enclosure Height field.
6. Panel designation: This is the second
panel. Enter B in the Panel Designation
field.
7. Number of input modules: Number of
inputs = 31, round up to the nearest
multiple of 8 which is 32. 32/8 = 4. Enter 4
in the Number of Input Modules field.
8. Number of output (relay) modules:
Number of relays = 42 round up to the
nearest multiple of 8 which is 48.
48/8 = 6. Enter 6 in the Number of Output
(relay) Modules field.
Applicable to all panels:
9. Enclosure options: Key lock required.
Enter 2 in the Enclosure Options field.
Finalized catalog numbers:
First panel is: 5WG1 704-8XA34-Z2
Second panel is: 5WG1 705-8XB46-Z2
External options
After you have finished with the
LCP3000EZ catalog number, select any
external options for the project. i.e.:
- Motion sensors (two SIEMENS motion
sensors are supported per panel). Third
party motion sensors with dry contacts
can be used; This type is used in
conjunction with the Input Modules
- Outdoor light sensor (one is supported
by each network of 10 panels
- Override or key switch (you may select
this option, although the binary inputs
can also be used for this purpose
- Web Access software (ComBridge
Studio)
- OPC interface
- E-mail services
- Data Base services
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11-3
Lighting Controls
LCP3000EZ
Accessories
LIGHTING
CONTROLS
11
Options (not included in panel catalog number)
5WG1 372-5EY01-Z-A201
4 control channels time clock
5WG1 373-5EY01-Z-A202
16 control channels time clock
5WG1 255-2AB11
Motion sensor
5WG1 114-2AB02-Z-A221
Wall mounted bus coupler for motion sensor(s). Panel A*
5WG1 114-2AB02-Z-A231
Wall mounted bus coupler for motion sensor(s). Panel A*
5WG1 114-2AB02-Z-B222
Wall mounted bus coupler for motion sensor(s). Panel B*
5WG1 114-2AB02-Z-B232
Wall mounted bus coupler for motion sensor(s). Panel B*
5WG1 114-2AB02-Z-C223
Wall mounted bus coupler for motion sensor(s). Panel C*
5WG1 114-2AB02-Z-C233
Wall mounted bus coupler for motion sensor(s). Panel C*
5WG1 114-2AB02-Z-D224
Wall mounted bus coupler for motion sensor(s). Panel D*
5WG1 114-2AB02-Z-D234
Wall mounted bus coupler for motion sensor(s). Panel D*
5WG1 114-2AB02-Z-E225
Wall mounted bus coupler for motion sensor(s). Panel E*
5WG1 114-2AB02-Z-E235
Wall mounted bus coupler for motion sensor(s). Panel E*
5WG1 114-2AB02-Z-F226
Wall mounted bus coupler for motion sensor(s). Panel F*
5WG1 114-2AB02-Z-F236
Wall mounted bus coupler for motion sensor(s). Panel F*
5WG1 114-2AB02-Z-G227
Wall mounted bus coupler for motion sensor(s). Panel G*
5WG1 114-2AB02-Z-G237
Wall mounted bus coupler for motion sensor(s). Panel G*
5WG1 114-2AB02-Z-H228
Wall mounted bus coupler for motion sensor(s). Panel H*
5WG1 114-2AB02-Z-H238
Wall mounted bus coupler for motion sensor(s). Panel H*
5WG1 114-2AB02-Z-J229
Wall mounted bus coupler for motion sensor(s). Panel J*
5WG1 114-2AB02-Z-J239
Wall mounted bus coupler for motion sensor(s). Panel J*
5WG1 114-2AB02-Z-K230
Wall mounted bus coupler for motion sensor(s). Panel K*
5WG1 114-2AB02-Z-K240
Wall mounted bus coupler for motion sensor(s). Panel K*
5WG1 588-2CB11-Z-A211
Touch Panel, Panel A
5WG1 588-2CB11-Z-B212
Touch Panel, Panel B
5WG1 588-2CB11-Z-C213
Touch Panel, Panel C
5WG1 588-2CB11-Z-D214
Touch Panel, Panel D
5WG1 588-2CB11-Z-E215
Touch Panel, Panel E
5WG1 588-2CB11-Z-F216
Touch Panel, Panel F
5WG1 588-2CB11-Z-G217
Touch Panel, Panel G
5WG1 588-2CB11-Z-H218
Touch Panel, Panel H
5WG1 588-2CB11-Z-J219
Touch Panel, Panel J
5WG1 588-2CB11-Z-K220
Touch Panel, Panel K
5WG1 254-3EY01-Z-A203
Outdoor ambient light level sensor
5WG1 220-2CB02-Z-A204
Key switch
63101-32-01
Software for LAN connection (for monitoring and control)
63101-32-10
5 license extension for LAN software
63101-32-06
OPC services for connection with BAS, LAN software required
63101-32-01
LAN software e-mail services
63101-32-04
LAN software database services
63101-32-08
LAN software Visual Editor
* Each panel supports 2 SIEMENS motion sensors. Catalog number corresponds to bus coupling 1 and bus coupling
2 for each panel. The actual motion sensing device plugs into the bus coupling unit.
Notes about components catalog number:
– First 12 characters are the “out of the box” component catalog number (i.e. 5WG1 588 2CB11).
– Z is a position holder in the catalog number sequence.
– Last four characters are for a component’s specific location in the system (for example K220; where K indicates
that the device belongs to panel K and 220 is the device’s unique address).
11-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5WG1 376-5EY01-Z-A201
4 Control channels
5WG1 254-3EY01-Z-A203
Outdoor ambient light sensor
5WG1 148-1AB21-Z-A251
IP Interface
Lighting Controls
Accessories
Selection
Description of devices
Input Device (5WG1 2611CB01): Block of 4 digital
inputs. It can take inputs
from a set of dry contacts
(maintained or momentary).
Inputs requires 24 volt supplied
by the power supply.
Power Supply (5WG1 1231CB01): Input 120 V, 50/60 HZ.
One per panel. It supplies
voltage for communications and
for the inputs.
Choke (5WG1 120-1AB01): It is
mounted next to the power
supply. The choke prevents the
power-supply 5WG1 123-1CB01
from short-circuiting the data on
the bus line. It picks up the
power from the two outer
printed conductors and feeds it via inductors to the two inner
printed conductors.
Four Control Channels Time
Clock (5WG1 372-5EY01): It has
four control channels; each
channel can be seen by the
system as an input. This device
can be programmed with up to
322 different schedules,
automatic day light saving time and 10 years battery back up.
Sixteen Control Channels Time
Clock (5WG1 373-5EY01): It has
16 control channel. Each channel
can be seen by the system as an
input. This device can be
programmed with up to 500
different schedules, automatic
day light saving time and 10 years battery back up. The first
four control channels can be programmed as astronomical
time clock. This feature allows to control the outside lights
based on date and geographical location, rather than with an
outdoor light level sensor.
RS232 Interface (5WG1 1481AB04: It allows the user to
configure the panel on site via a
DB9 serial cable. Configuration is
done with the software supplied
free of charge with every order.
IP Interface (5WG1 148-1AB21):
It allows connection to the user’s
LAN for control and monitoring of
the system. Optional ComBridge
Studio software is required for LAN
connectivity. It can be configured for
fixed IP address and also for DHCP.
Outdoor Ambient Light Sensor
(5WG1 P254-3EY01): Used to
control outdoor lights such as
parking lot, signs, drive through
window. Three light level
thresholds (100 Fc, 50 Fc and 20
Fc) are pre-programmed into the
device. This is also a temperature sensor. Outside
temperature can be read when the optional ComBridge Studio
LAN software is used.
Motion Sensor (5WG1 2552AB11): Detects motion to
command light to turn ON. Each
motion sensor require bus
coupling unit 5WG1 114-2CB02.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11-5
LIGHTING
CONTROLS
Output (relay) Device (5WG1
512-1CB01): Block of 8 277 V,
20 amp, relays with timers,
visual indication and manual
override capability.
11
All devices described here are interconnected via 18 AWG solid copper twisted pair or via a communication bus on the DIN rails
incorporated into the panels.
Lighting Controls
LIGHTING
CONTROLS
11
Accessories
Selection
Key Switch (5WG1 220-2CB02):
It is a block of 4 digital inputs. It
can take inputs from a set of dry
contacts (maintained or
momentary). It requires no
voltage from the power supply.
One UP220 device is supported
by each set of 10 panels. This device is intended to be used
for after hours override purposes (i.e. cleaning crews).
Touch panel (5WG1 588-2CB11):
It allows remote control of the
lights. It also provides relay
status, indication of outside light
level and temperature. Each
panel in the system can have a
dedicated touch panel.
11-6
LAN software (ComBridge Studio): It allows connectivity to the
user’s LAN for control and monitoring of the lighting control
system. It has options for the following applications:
▪ Additional licenses to allow more than one person to
control the lights (access is password protected with
levels of access authority)
▪ OPC interface: For communications with building
automation systems (BAS)
▪ E-mail services: can be programmed to send e-mail when
a pre-selected event occurs
▪ Database Services: Stores pre-selected events on a
database for further viewing and analysis
▪ Visual editor: Allows a graphical interface with the lighting
control system
Replacement parts
To order replacement parts simply refer to the number on a
device label (for devices installed in the enclosure, this number
label is also on the inner door. This number starts with the
panel letter designation followed by a number (i.e. A-101).
From this number, SIEMENS knows exactly what you need.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lighting Controls
Web Visualization with ComBridge Studio
e-Mail
Service
WebAccess
Engine
Database
Service
InfoPoint
Configurator
The OPC service links EIB elements with OPC client systems.
Configuration
Manager
Automation Services execute automation functions directly from
the ComBridge Studio Server PC: schedule jobs, e-mails and
database entries for the purpose of data analysis and reporting.
LIGHTING
CONTROLS
OPC
Engine
WebTab
Service
11
OPC
Service
Visual Director is a complete Web visualization tool with user
interface, its own navigation structure with EIB display and
control elements that can be freely positioned.
Visual
Editor
Visual Director
Scheduling
Service
Automation Engine
Overview
Core Services
Core and Webtab Services link the EIB system to the network
and enable fast tabular visualization.
Applications
Tools
Get and configure only the functions that you really need to
establish a simple, easy to operate interface. The graphical
interface is ideal for use by non-technical personnel. It is also
used to create links to other building automation functions
and systems.
IP Router, users and functional expansions can be added at
any time. This offers considerable cost benefits. These
functions can be divided into four groups:
▪ Webtab Services
▪ Automation Services
▪ OPC Services
▪ Visualization
Webtab Services
Automation Services
This package provides all the functions to control and monitor an
LCP3000EZ Lighting Control System.
It contains Webtabs, which support linking to the visualization of
the lighting control data points in the shortest time possible.
The following tools are part of the Core and Webtab Services:
▪ ComBridge Configuration Manager: User interface for
management of the IP router, TCP engines and software
licenses
▪ ComBridge InfoPoint Configurator: Easy-to-use tool for the
creation of Webtabs, OPC data point lists, email services,
time jobs and database entries.
▪ Web-based user control:
Control of the installation, ComBridge Studio Automation
Services deliver application services at the supervisory level.
Schedules:
Daily programs can be stored and managed centrally using the
Scheduling Service. Simply checkmark the week days on which
you need to activate. Switching and control commands can be
executed according to the schedule.
Emails:
Critical conditions or events can be monitored so that in event of
their occurrence, emails are delivered. The contents of emails
can be custom designed, and even sent with an attachment, e.g.
with photos or circuit diagrams. This capability enables an easy
to visualize system that can expedite Trouble Diagnosis & Repair.
Data recording:
Using the Database Services, you can write selected events to
a database for daily, weekly or monthly scheduled evaluation
and reporting.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11-7
Lighting Controls
Web Visualization with ComBridge Studio
Overview
Visual Director
ComBridge Studio offers full OPC server functionality enabling
SIEMENS lighting controls integration with other building
automation systems (BAS).
ComBridge Studio Visual Director is supplementary to Webtab
and offers a wide range of design options such as definable
navigation, layout of the graphical display and control
elements.
LIGHTING
CONTROLS
11
OPC Services
Double Advantage:
ComBridge Studio OPC Services can also be used at the same
time as other ComBridge Studio applications.
For example, the facility can be controlled by OPC at the same
time as the workplace is controlled using Webtab or a Visual
Director application. It is also possible to ensure access to the
system installations for service personnel, or setup an email
message services.
Quantity Control:
Not all data is of interest to the OPC client system.
Exchanging all data with the system can lead to huge volumes
of information that clogs up the system. In the InfoPoint
Configurator you can restrict lists to the required information
only.
Web Standards:
Visual Director is HTML-based. Web assets, such as,
navigation, graphics, dynamic HTML, layouts, scripts and
dynamic contents in visualization projects can be used
repeatedly. Furthermore, HTML know-how is now prevalent in
the market and easily available.
User Login:
Visual Director provides complete system definition,
application and use. Each user can be assigned their own
start page and navigation allowing for individual system or
operational “views” depending upon operator or monitor
access level, engineering, maintenance or security function.
The user level lets you control the data points each user can
access.
Visual Editor:
Visual Director contains a menu-assisted, pixel-graphic HTML
editor with a multitude of functions for creating your Web user
interface.
11-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lighting Controls
Wiring Diagrams
5WG1 261-1CB01 Binary Input Device
11
LIGHTING
CONTROLS
Figure 2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11-9
Lighting Controls
Wiring Diagrams
11
5WG1 512-1CB01 Load Relays Device
3.54" (90 mm)
LIGHTING
CONTROLS
Communications Connector
5.67" (144 mm)
From
Breaker
This type connection allows one
breaker to feed more than one relay
Figure 3
11-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lighting Controls
General
Other Applications:
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11-11
LIGHTING
CONTROLS
Figure 4
11
If the LCP3000EZ does not meet your needs SIEMENS can help with your lighting control requirements beyond the capabilities
of the LCP3000EZ.
SIEMENS has the equipment and technology to do complex installations which require dimming for energy savings. If you
require day light harvesting for additional energy savings, SIEMENS is your source.
For fluorescent dimming, SIEMENS uses DALI (Digital Addressable Lighting Interface). This is state of the art technology, which
uses individually addressable DALI ballasts.
This technology allows you to change lighting zones via software without the need of re-wiring the system. It also allows you to
monitor ballast and lamp failure, as well as the light output (relay).
Contact your nearest SIEMENS Energy and Automation Sales Office for additional information.
LIGHTING
CONTROLS
11
Notes
11-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12SPEEDFAX
TM
2007-2008 Switchboards
Contents
Front Connected Switchboards
Type SB1, SB2, and SB3
12-3 – 12-6
General Layout Information
12-7 – 12-12
Type RCS
12-13
Multi-Metering Switchboards
Type MMS
12-14
Type SMM
12-15 – 12-17
Super Blue Pennant Switchboards
12-18 – 12-23
Service Entrance Switchboards
Type BCT
12-24
Type SCT
12-25
Switchboard Replacement and Modifications Kits
Residential Commercial Industrial
12-26
SWITCHBOARDS
Rear Connected Switchboards
12
Type IPS
12-2
Front Connected Switchboards
SWITCHBOARDS
12
Type SB1, SB2 and SB3
General
Maximum Flexibility
Whether the design is for a 240V ac,
400 ampere system; a 600V ac, 6000
ampere system; or something in
between, Siemens front connected
switchboards should be considered.
Every aspect of the equipment design
has been targeted at improving layout
convenience, reducing installation
costs, and minimizing the impact
and cost of system changes. These
switchboards provide the rugged
construction and service reliability
required for industrial plants, hi-rise
complexes, hospitals, and commercial
buildings, and are built to UL 891 and
NEMA PB-2 standards.
Type SB1 For Limited
Space Applications
The Siemens type SB1 switchboard
has been specifically designed for
those applications where floor space
is at a premium. The SB1 contains
front-connected protective devices
and bus ratings up to 2000 amperes
at 600V ac. The rear of all sections
align as standard.
Type SB2 For Increased Service
And More Load Cable Room
Siemens SB2 switchboards can have
extra depth behind the vertical bus in
each distribution section, and contains
protective devices and bus rated up to
4000 amperes at 600V ac. The rear of
all sections align as a standard. Front
and rear alignment is available as an
option.
Type SB3 For Custom Options
The SB3 switchboard is available with
protective devices and bus up to 6000
amperes at 600V ac. Options include,
but are not limited to, incoming and
outgoing busway, ACCESS
communication, protective relaying,
autothrowover schemes and
transformer connections.
Siemens SB Switchboards
Available Features
Maximum Bus Rating
Main Devices
Feeder Devices
Solid State MCCB
Customer Metering
Utility Metering
Density Rated Bussing
Accessible
SB1
2000A
MCCB, VB, HCP, BPS
MCCB, VB, HCP, BPS
No
Yes
Yes
No
Front
SB2
4000A
MCCB, VB, HCP, BPS, WL (Fixed)
MCCB, VB, HCP, BPS, WL, (Fixed)
100,000 AIC
Yes
Yes
Yes
Front
Alignment
Rear
Rear STD; Rear/Front Optional
For additional information on this product visit our website at www.sea.siemens.com.
For application pricing information contact your local distributor or the closest Siemens sales office.
12-2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
SB3
6000A
MCCB, VB, HCP, BPS, WL
MCCB, VB, HCP, BPS, WL
200,000 AIC
Yes
Yes
Yes
Front (up to 38" deep)
Front/Rear (Above 38" deep)
Rear STD; Rear/Front Optional
Integrated Power Systems Switchboards
Type IPS
General
Service Section
•
accommodate systems up to 4000
amperes. 600V ac maximum in 1-phase
3-wire, 3-phase 3-wire, or 3-phase 4-wire
configurations.
All components can be built into
standard NEMA Type 1 indoor
enclosures, or optional NEMA Type 3R
outdoor construction.
Bus bars are available in standard
tin-finished aluminum or optional
silver-finished copper. Standard bus is
sized on the basis of heat rise criteria, in
accordance with UL 891. All bus bars are
sized to limit heat rise to 65ºC above a
maximum ambient temperature of 40ºC.
As an option, conductor material can be
sized according to density limits, based
on bus material. The applicable limits are:
Copper — 1000 amperes sq. in.
Aluminum — 750 amperes sq. in.
Screw type mechanical connectors (lugs)
are provided as standard equipment on
all devices. However, compression
connectors are available as an option.
Distribution Sections
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Feeder Breakers (up up 4000 Amp)
• Feeder Switches (up up 4000 Amp)
• Motor Starter Modules
(up to NEMA Size 4)
• Main Breaker or Switch
up to 4000 Amp
• MLO to 2000 Amp
Transient Voltage
Surge Suppressor
Digital Meter
• Lighting Contactors (30 to 225 Amp)
Local Display Unit
(ACCESSTM Communication)
• PLC
• Time Clock
Distribution Transformer
Lighting Control
Lighting Contactors, PLC, Time Clocks,
ATS, Telephone Cabinets
HVAC Control
Customer Supplied Components
Lighting Panelboards
For additional information on this product visit our website at www.sea.siemens.com.
For application pricing information contact your local distributor or the closest Siemens sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-3
SWITCHBOARDS
lPS switchboards are built to UL 891 and
NEMA PB-2 standards. Standard height
of lPS sections is 90 inches. Optional
height of 70 inches is available. Minimum
depth of lPS switchboards is 13.75
inches. Optional depths of 20, 28 and 38
inches are available. Some components
dictate the use of optional depths.
Numerous components are available
to fit customer's individual needs.
▪ Lighting Panelboards (MLO and Main
Device)
▪ Power Monitoring
▪ Distribution Transformers
▪ ACCESS Communication
▪ Lighting Contactors
▪ Lighting Control
▪ HVAC Control
▪ Building Management
▪ PLC
▪ Automatic Transfer Switch
▪ Motor Starter Units
▪ Backup Generators
Typical lPS switchboards consist of
one service section and one or more
distribution sections that are cable
connected.
However, lPS switchboards are also
available with through bus and pull
sections. lPS switchboards will
12
The modular design of the Siemens lPS
switchboard allows the user to integrate
electrical distribution equipment, power
monitoring and environmental controls
that typically mount in multiple
enclosures into one switchboard line-up.
Users have the freedom to configure an
arrangement that best fits their individual
needs. Optional factory installed
interconnection wiring is available to
further reduce installation time.
lPS Equipment Benefits include:
▪ Less product to handle and install
▪ Lower total installation cost
▪ Less time on the jobsite
▪ Less floor space used for electrical
equipment
▪ Single source equipment supplier
▪ Simplified field setup and programming
Integrated Power Systems Switchboard (Type IPS)
Individually Mounted Devices
3.00
(76.2)
3.00
(76.2)
12
2.50 (63.5)
SWITCHBOARDS
D
CONDUIT AREA
TOP & BOTTOM
2.50 (63.5)
W
2.50 (63.5)
5.00
(127)
90.00
(2286)
Unit
Space
75.00
(1905)
5.00
(127)
2.50 (63.5)
Dimensions shown in inches and millimeters ( ).
12-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Integrated Power Systems Switchboard (Type IPS)
Individually Mounted Devices
Unit Space For Components
Dimensions in inches (mm)
Required
Minimum
Unit Space
Section Width (W)
Component
Distribution Transformer
Distribution Transformer
Distribution Transformer
Distribution Transformer
Distribution Transformer
Lighting Contactor
30 through 225 Amp
ASCO 920 or Siemens CLH
PLC (LOGO!)
PLC (S7–200)
(Up to 6 in 20" and 25" wide,
9 in 32" wide)
37.50 (953)
20.00 (508)
13.75 (349)
SWITCHBOARDS
LCP Lighting Control Panel
Distribution Transformer
25.00 (635)
12
P3 Panels
P1, P2 Panels
Time Clock
Minimum
Section Depth (D)
25.00 (635)
(15 KVA)
(30 - 45 KVA)
(75 - 112.5 KVA)
(150 KVA)
(225 KVA)
(300 KVA)
(Up to 4 in 20" and 25" wide,
6 in 32" wide)
37.50 (953)
37.50 (953)
75.00 (1905)
37.50 (953)
(Up to 6 in 20" and 25" wide,
9 in 32" wide)
(Up to 4 in 20" and 25" wide,
6 in 32" wide)
Automatic Transfer Switch
(up to 400 Amp)
400-1200 Amp MCCB
1600-2000 Amp MCCB
800-2000 Amp ICCB (WL Breaker)
2500-4000 Amp ICCB (WL Breaker)
800-1200 Amp BPS
1600-2000 Amp BPS
2500-4000 Amp BPS
75.00 (1905)
20.00 (508)
25.00 (635)
32.00 (813)
38.00 (965)
28.00 (711)
46.00 (1168)
38.00 (965)
20.00 (508)
13.75 (349)
32.00 (813)
20.00 (508)
37.50 (953)
75.00 (1905)
37.50 (953)
20.00 (508)
28.00 (711)
38.00 (965)
38.00 (965)
75.00 (1905)
46.00 (1168)
NOTE: For required unit space relative to HVAC control and custom specified components, contact Siemens sales.
These components can be mixed in a 37.5" (953mm) high compartment.
37.50" (half section) for panels that would fit in to panel cans <=44".
75" (full section) for panels that would fit into panel cans >44".
20.00" for P1/P2 panel (note may be mounted 2 across in >=38" wide sections).
25" for P3 panels (note may be mounted 2 across in >=46" wide sections).
Distribution transformer minimum size requirements are based on 150 degree rise TP1
rated units - aluminum or copper bus. Consult Siemens for size requirements related to other
ratings including K-Rated. Outdoor sections with transformers must also have rear door
added to that section for ventilation. Stacked transformers in a section are limited to 45KVA
at this time. Contact Siemens for updated information.
For CLH contactor only, up to 6 in 20"and 25" wide section can be mounted
and 9 in a 32" wide section.
ATS includes generator controls. Contact Siemens sales for details.
Emergency power generators are available. Contact Siemens sales for details.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-5
Integrated Power Systems Switchboard
SWITCHBOARDS
12
Typical IPS Lineup
13.75
(349)
28.00
(711)
250 A
MB
P1
LP1
250 A
MLO
P1
LPD
250 A
MLO
P1
LP2
250 A
MLO
P1
LP3
800 A MLO
DP1 480Y/
277 Vac
32.00
(813)
75 KVA
XFMR
D
38.00
(965)
Dimensions shown in inches and millimeters ( ).
12-6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
20.00
(508)
General Layout Information (Type SB1, SB2, SB3, IPS)
Individually Mounted Service Mains
Top Entrance Cables Pull Box
Dimensions in Inches (mm)
Height
Width
Max.
Amp. Device
Rating Type
Pull Section
NonBussed
Bussed
UG ���
H1
W1
W2
W3
9300
Meter
Minimum
Required
Depth
600
800
1000
1200
1600
2000
H1
14.00
(356)
Main
20.00
(508)
W1
32.00
(813)
SWITCHBOARDS
400
HJXD6, HHJD6,
HHJXD6, JXD2,
JXD6, JD6, HJD6,
SJD6, SHJD6
HLXD6, HHLD6,
HHLXD6, LXD6,
LD6, HLD6,
SLD6, SHLD6
MXD6, MD6, HMD6,
LMXD6, LMD6,
HLMD6, HLMXD6,
SMD6, SHMD6,
90.00
NM, HM, LM
(2286)
NXD6, ND6, HND6,
SND6, SHND6,
HNXD6, NN, HN, LN
NXD6, ND6, HND6,
SND6, SHND6,
HNXD6, NN, HN, LN
PXD6, PD6, HPD6,
SPD6, HPXD6,
NP, HP, LP
RXD6, RD6,
HRXD6, HRD6
12
Molded Case Circuit Breakers
D
20.00
(508)
20.00 ���
(508)
Bottom Entrance with
Non-Bussed Pull Section
9300
Meter
38.00
(965)
32.00
(813)
H1
Main
32.00
(813)
28.00 ���
(711)
D
W2
W1
Insulated Case Circuit Breakers — Stationary Mounted
800
1200
1600
2000
2500
3000
4000
Type WL
Insulated
Case
Breaker
90.00
(2286)
38.00
(965)
32.00
(813)
38.00
20.00
(508)
32.00
(813)
(965)
���
H1
14.00 (356)
20.00 (508)
HCP
Vacu-Break
90.00
(2286)
38.00
(965)
Main
D
20.00
(508)
32.00
(813)
Bolted
Pressure
46.00
(1168)
20.00 ���
(508)
38.00
(965)
32.00
(813)
W1
W3
28.00 ���
(711)
For EUSERC UGPS dimensions, refer to Siemens Front Connected Switchboard Selection & Application Guide.
Optional depths are 28 and 38 inches.
��� Optional depth is 38 inches.
���
9300
Meter
38.0
(965)
Switches
400
600
800
1200
800
1000
1200
800
1000
1200
1600
2000
2500
3000
4000
Bottom Entrance with
Bussed Pull Section
28.00 ���
(711)
Bottom Entrance
38.00
(965)
9300
Meter
H1
Main
D
W1
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-7
General Layout Information (Type SB1, SB2, SB3, IPS)
12
Main Lug Only — 400A through 2000A
Available branch circuit unit space varies
depending on amperage of incoming
service, lug type and if through bus is
L
required. If more unit space is required
than is shown in the table below, one or
more panel mount device distribution
sections must be added.
L
L
Cond. Area
Top / Bottom
Cond. Area
Top / Bottom
SWITCHBOARDS
L
K
K
K
K
M.L.O.
H
H
Unit
Space
Unit
Space
M.L.O.
D
D
W
W
Top Entrance
Bottom Entrance
Main Lug Only Unit Space
Dimensions in inches (mm)
Max.
Ampere
Rating
Suitable
For Use
Only As
Service Av
Equipment
Unit Space
Max.
AIC
Rating
Lugs
Height
(H)
400
600
800
1200
Available
as a user
selectable
option
200,000
90.00
(2286)
Standard
500 kcmil
62.50
(1588)
60.00
(1524)
Alternate
750 kcmil
60.00
(1524)
56.25
(1429)
Compression
600 kcmil Max.
58.75
(1492)
57.50
(1461)
52.50
(1334)
50.00
(1270)
53.75
(1365)
45.00
(1143)
38.75
(984)
45.00
(1143)
55.00
(1397)
Width
(W)
Minimum
Depth (D)
Conduit Area
K
L
13.75
(349)
2.50
(64)
32 or 38
(8.13 or
965)
1600
2000
38.00
(965)
46 in. (1168) width available as an option.
See page 12-12 for unit space requirements for disconnect devices.
Optional 70" high is also available. Unit space is reduced by 20".
If load through bus is required, the available unit space is reduced by 7.50 inches for 400-1200 amp MLO sections.
Maximum of 6 disconnect devices only.
SUSE service disconnects 1000A or higher on solidly grounded wye systems of more than 150V to ground require ground fault protection. Ground fault uses 10 in.
(254 mm) of unit space. See NEC 230-95 for additional details. This applies to branch devices 1000A or larger on non-service equipment unless ground fault protection
is provided upstream at the service. See NEC 240-13 for further information.
Optional section depths are 20", 28" and 38."
12-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3.00
(76)
General Layout Information (Type SB1, SB2, SB3, IPS)
Panel Mounted MCCB — 400A through 1200A
IPS service sections can house both
labels, but include no provisions for
a main service disconnect device and
utility metering.
branch disconnects. Switchboards
can be furnished with “Suitable for
Branch circuit device unit space varies,
Use Only as Service Equipment”
depending on the rating and consequent
400 -1200A Main Breaker With GFP
L
L
K
SWITCHBOARDS
L
12
400-1200A Main Breaker Without GFP
physical size of the main disconnect
device. If more unit space is required
than is shown in the tables below, one
or more additional panel mounted device
distribution sections must be added.
L
K
Conduit Area
Top or Bottom
Conduit Area
Top or Bottom
K
K
MCB
Unit
Space
H
Unit
Space
GF
H
M/B
D
D
W
W
Fig. 1 Top Entrance (Invert for bottom entrance)
Fig. 2 Bottom Entrance (Invert for top entrance)
Main Breaker with or without Ground Fault Protection
Dimensions in inches (mm)
Max.
Ampere
Rating
400
600
800
1000
1200
Conduit Area
Breaker
Type
JXD2, JXD6, JD6,
HJD6, HJXD6,
HHJD6, HHJXD6,
SJD6, SHJD6
LXD6, LD6, HLD6,
HLXD6, HHLD6,
HHLXD6, SLD6,
SHLD6
LMD6, LMXD6,
HLMD6, HLMXD6,
NM, HM, LM
MXD6, MD6,
HMD6, HMXD6
SMD6, SHMD6
NXD6, ND6,
HND6, HNXD6,
NN, HN, LN
SND6, SHND6
NXD6, ND6,
HND6, HNXD6,
NN, HN, LN
SND6, SHND6
Height
(H)
Unit Space
Width
(W)
Minimum
Depth (D)
K
L
Main
Location
Service
Entrance
Label
56.25 (1429)
32.00 (813)
Yes
90.00
(2286)
13.75
(349)
53.75 (1365)
2.50
(64)
3.00
(76)
Top or
Bottom
52.50 (1334)
40.00 (1016)
52.50 (1334)
38.00 (965)
40.00 (1016)
Yes
52.50 (1334)
40.00 (1016)
Ground fault, if applied, uses 10 in. (254 mm) of unit space.
See page 12-12 for unit space requirements for disconnect devices.
Available unit space for 400 and 600 amp main breaker sections is reduced to
53.75 if load side through bus is required.
Optional section depths are 20", 28" and 38".
Optional 70" high is also available. Unit space is reduced by 20".
46 in. (1168 mm) wide if 750 kcmil or compression lugs required.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-9
General Layout Information (Type SB1, SB2, SB3, IPS)
Panel Mounted HCP Switch Main — 400A through 1200A
400 - 1200A HCP
L
L
K
Conduit Area
Top or Bottom
12
K
SWITCHBOARDS
400-1200A
HCP
Main Switch
H
Unit
Space
D
W���
Top
Feed
Bottom
Feed
Top Entrance (Invert for Bottom Entrance)
400 — 1200A HCP Switch Main
Dimensions in inches (mm)
Max.
Ampere
Rating
400
600
800
1200
Height
(H)
Unit
Space ���
Width
(W) ���
Minimum
Depth (D) ���
Conduit Area
K
L
Main
Location
90.00 ���
(2286)
46.25
(1175)
38.00
(965)
13.75
(349)
2.50
(64)
Top
or
Bottom
���
46 in. (1168 mm) width available as an option.
See page 12-12 for unit space requirements for disconnect devices.
��� Optional section depths are 20", 28" and 38".
��� Optional 70" high is also available. Unit space is reduced by 20".
���
12-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3.00
(76)
Service
Entrance
Label
Yes
General Layout Information (Type SB1, SB2, SB3, IPS)
Panel Mounted Devices Through-Bus Fed
Through-Bus Fed Distribution Sections
L
L
K
Conduit Area
Top or Bottom
K
12
SWITCHBOARDS
Bus
Bar
H2
Unit
Space
Through
Bus
H1
➀
D
W
Through-Bus Fed Dimensions
Dimensions in Inches (mm)
Maximum
Riser
Amperage
2000
3000
With
Maximum
Through-Bus
Amperage
2000
2500 & 3000
4000
Height
Width
H1
Unit
Space
H2
65.00 (1651)
32.00 or 38.00
(813) (965)
62.50 (1588)
38.00 or 46.00
(965) (1168)
90.00 (2286)
4000
W
Minimum
Section Depth
(D)
20.00 (508)
Conduit Area
K
L
2.50 (64) 3.00 (76)
See page 12-12 for unit space requirements for disconnect devices.
Optional 70" high is available. Unit space is reduced by 20.
Optional section depths are 28" and 38".
46 inches (118 mm) width optional.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-11
General Layout Information (Type SB1, SB2, SB3, IPS)
Unit Space for Panel Mount Disconnect and Miscellaneos Components
Unit Space Requirements — Molded Case Circuit Breakers (Mains and Branches)
Dimensions in inches (mm)
Max.
Ampere
Rating
SWITCHBOARDS
12
100
125
225
250
400
600
800
1200
Device
Type
BL, BLH, HBL, BQD, NGB, NEB, HEB
ED4, HHED6
ED4, ED6, HED4, HHED6,
NGB, NEB, HEB
HED4, HHED6, ED4, NGB,
ED6 with accessories
CED6
CED6 with accessories
QJ2, QJH2, QJ2-H,HQJ2-H
FXD6, FD6, HFD6, HFXD6,
HHFD6, HHFXD6
CFD6
JX2, JXD6, JD6, HJD6
HJXD6, HHJD6, HHJXD6
SJD6, SHJD6
LXD6, LD6, HLD6, HLXD6,
HHLD6, HHLXD6
SLD6, SHLD6
LMD6, LMXD6, HLMD6, HLMXD6
MXD6, MD6, HMD6, HMXD6
SMD6, SHMD6
NM, HM, LM
NXD6, ND6, HND6, HNXD6
SND6, SHND6, NN, HN, LN
Total Poles
Available
1P
2P
Unit Space Required
Twin
Mounted
Single
Mounted
Enclosure
Minimum
Width
—
32.00 (813)
5.00 (127)
8.75 (222)
—
38.00 (965)
8.75 (222)
32.00 (813)
10.00 (254)
38.00 (965) ���
—
8.75 (222)
38.00 (965)
1
—
10.00 (254)
38.00 (965) ���
6
3P
2
2
3.75 (95)
6.25 (159)
2
3.75 (95)
6.25 (159)
2
5.00 (127)
—
1
2
—
—
1
1
2
—
—
8.75 (222)
1
—
1
1
—
Unit Space Requirements For
Miscellaneous Components
Unit Space Requirements — Fusible Switches (Mains and Branches)
Dimensions in inches (mm)
Max
Amp
Rating
30-30
30-30
30-60
60-60
60-100
100-100
200-200
100
200
400
600
400 - 1200
Switch
Type
240V
Twin
2.50 (64) ���
Unit Space Required
600V
Single
Twin
—
Single
Enclosure
Minimum
Width
5.00 (127)
—
Vacu-Break
—
32.00 (813)
7.50 (191)
10.00 (254) ���
—
HCP
7.50 (191)
10.00 (254) ���
7.50 (191) —
7.50 (191)
10.00 (254) —
10.00 (254)
15.00 (381)
16.25 (413)
—
15.00 (381) 38.00 (965)
16.25 (413)
���
46 in. (1168mm) wide if 750 kcmil or compression lugs required.
The 2.5 in. (64) high unit is suitable for NEC Class H, K1 and K5 fuses only. Class R rejection type fuse holders
are not available.
��� Unit rated 600V, factory configured to accept 250V Class K or R fuses. Field convertible to accept Class J fuses.
��� Factory configure to accept Class J fuses only.
���
12-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Component
Local Display
ADR 9000 (SRTU)
Transient Voltage Surge
Suppressor (TPS)
9200A Digital Meter
9200B Digital Meter
9200C Digital Meter
9300 Digital Meter
9330 Digital Meter
9350 Digital Meter
Lighting Contactor
30 to 225 Amp
Siemens CLH
Lighting Contactor
30 to 225 Amp ASCO 920
Time Clock
Sangamo, Tork or Paragon
PLC (LOGO!TM and S7)
Unit Space
in inches (mm)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
10.00 (254)
20.00 (508)
10.00 (254)
10.00 (254)
Rear Connected Switchboards
Type RCS
General
Switchboard
Type RCS
Mounting
WL Insulated Case
Circuit Breaker
Drawout Mount
WL LV Power
Circuit Breaker
Drawout Mount
Main Devices
Individual
400-5000A
400-5000A
Branch Devices
Individual
400-5000A
400-5000A
RCS switch boards utilize Type WL
insulated case and/or low voltage power
circuit breakers with drawout mountings.
Features and benefits include high
breaker density, 100kA standard short
circuit bus bracing and three levels of
horizontal bus. Options include insulated/
isolated bus, Dynamic Arc Flash Sentry,
ModBus Communication and intelligent
power monitoring.
For additional information on this product visit our website at www.sea.siemens.com.
For application pricing information contact your local distributor or the closest Siemens sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-13
SWITCHBOARDS
can be requested to secure the outgoing
cables. The front and rear of all sections
align and are designed for mounting
away from the wall. RCS switchboard
will accommodate requirements up to
6000 ampere and 600 volts. The main
bus can be specified for 400 to 6000
ampere rating. Main, tie and branch
devices are available in amperage ratings
up to 6000 amps. RCS switchboards can
be indoor (NEMA 1) or outdoor (NEMA
3R) construction.
12
Siemens RCS switchboards differ from
the front connected (Type SB1, SB2,
SB3) design primarily in the distribution
sections. In the distribution section the
branch feeders are individually mounted.
Because of this method of mounting,
access to the outgoing cable terminals
must be from the rear of the unit. Bus
bar extensions from the feeder devices
are run to the rear of the RCS section
stopping before the conduit area for
easy access and cable connection.
An optional cable management system
Multi-Metering Switchboards
SWITCHBOARDS
12
Type MMS
In today’s commercial and industrial
environments, the electrical metering
requirements vary according to the
specification of the development site.
Siemens offers a solution with high
quality multi-metering switchboards
that meet the non-EUSERC area
requirements. The MMS switchboard
meets the requirements of member
utilities and municipalities with these
dependable commercial switchboards.
Features
▪ Up to 4000A main service
208Y/120V, three phase/four wire
480Y/277V, 3-phase 4-wire
▪ 100A, 200A and 320A tenant mains
are available
▪ UL listed and labeled
General
▪ NEMA “Non-EUSERC” Design
▪ Hot sequence metering is standard;
cold sequence also available
▪ 50,000A symmetrical bus bracing is
standard; above 50,000A available upon
request.
▪ All meter sockets are pre-wired for
100A, 200A or 320A devices
▪ Copper or Aluminum bus available
▪ Units are front accessible.
▪ NEMA Type 1 and Type 3R construction
available
▪ Available with optional cable pull
sections
▪ Sockets include lever type manual
by-pass
▪ Load cable exit top or bottom
▪ Common depth for main and metering
sections upon request
▪ Ring-less type meter cover design
For additional information on this product visit our website at www.sea.siemens.com.
For application pricing information contact your local distributor or the closest Siemens sales office.
12-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Multi-Metering Switchboards
Type SMM
▪ Up to 4000A main service
120/240V 1-phase 3-wire
240/120V 3-phase 4-wire
208Y/120V 3-phase 4-wire
480Y/277V 3-phase 4-wire
SWITCHBOARDS
Features
General
▪ 200 amp continuous duty meter
sockets
▪ Meets EUSERC requirements
▪ UL listed and labeled
▪ Hot sequence metering standard cold sequence metering optional
▪ Test blocks are standard
▪ Copper or Aluminum bus
▪ 65,000A Sym bracing standard
(higher bracing rating available if
required)
▪ Type NEMA Type 1 and Type 3R
construction available
▪ Meets UL891 and NEMA PB2
standards
▪ Rear cable barriers available for top
load cable exist
▪ Ring type meter cover design
12
Completely engineered and assembled,
Siemens SMM commercial metering
switchboards require minimal field
assembly. They are UL listed and labeled
and meet all EUSERC standards. SMM
switchboards are built to meet the
rugged requirements of the western
United States. These units can be
modified to meet any additional
requirements of member utilities and
municipalities. For a high quality
dependable commercial metering
switchboard consider the West Coast
SMM design.
For additional information on this product visit our website at www.sea.siemens.com.
For application pricing information contact your local distributor or the closest Siemens sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-15
Multi-Metering Switchboards
Type SMM
General
Figure B 햹
20"
32"
Figure C 햸
Figure D햺
SWITCHBOARDS
12
Figure A햸
20"
32"
26"
SMM/SMD Sections with Space for Tenant Mains/Meter Sockets
Table 7.4.6.19 SMM 햲 Sections With Space For CB Mains And Sockets 햳 햴 햵
Sockets
Figure
3
6
A
B
Table 7.4.6.20 SMD 햶 Sections With Space For CB Mains And Sockets 햳 햴 햵
3
6
A
B
Table 7.4.6.21 SMM 햲 Sections With Space For T-Fuse Mains And Sockets 햳 햴 햵
3
6
A
B
Table 7.4.6.22 SMD 햶 Sections With Space For T-Fuse Mains and Sockets햳 햴 햵
3
6
A
B
Table 7.4.6.23 SMM 햲 Sections With Space For VB Mains And Sockets 햳 햴 햵 햷
2
6
2
6
C
D
C
D
Table 7.4.6.24 SMD 햶 Sections With Space For VB Mains And Sockets 햳 햴 햷
2
6
2
6
C
D
C
D
NOTE: Component priced Meterboards allow for any combination of 100 and 200 ampere tenant
mains or blank positions. Select the base structure, meter sockets and tenant mains accordingly.
햲 SMM
햵 When
햳 Price
햶 SMD
sections–Cross bus from 800–2500 ampere.
Sections 20" deep.
sockets with tenant mains from Table 7.4.6.25,
7.4.6.26, 7.4.6.27. Price sockets only from Table 7.4.6.28.
햴 Cross bus is not included. Price from Table 7.4.6.29
or 7.4.6.30.
12-16
load cables exit top of section, rear load barrier
(RLB) must be priced. See Table 7.4.6.31.
sections required for cross bus exceeding
2500 ampere. Sections 28" deep.
햷 Fuses not included. For Class J fuse provisions, change
R to J.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햸 26"
햹 38"
햺 35"
wide for Outdoor Type 3R.
wide for Outdoor Type 3R.
wide for Outdoor Type 3R.
Multi-Metering Switchboards
Type SMM
General
Components
Table 7.4.6.25 — Tenant Circuit Breaker With Meter Socket 햳
240 Volt
Option
햲
100
BQ
100
BQH
100
HBQ
200
QJ2
200
QJH2
200
QJ2-H
100
ED4
100
NGG
100
HED4
100
HEG
200
FD6
200
HFD6
100
ED4
100
NGG
100
HED4
100
HHED6
100
HEG
200
FD6
200
HFD6
200
HFD6
01
02
No.
of
Poles
I.C.
2
3
2
3
2
3
110,000
110,000
122,000
122,000
165,000
165,000
2
3
2
3
2
3
110,000
110,000
122,000
122,000
142,000
142,000
2
3
2
3
2
3
2
3
165,000
165,000
165,000
165,000
100,000
100,000
100,000
100,000
2
3
2
3
165,000
165,000
100,000
100,000
2
3
2
3
2
3
2
3
2
3
118,000
118,000
125,000
125,000
142,000
142,000
165,000
165,000
165,000
165,000
2
3
2
3
2
3
135,000
135,000
165,000
165,000
165,000
165,000
SWITCHBOARDS
Breaker
Type
12
Ampere
Rating
480 Volt
03
햲 Order
100A and 200A tenant circuit breakers from
the same option only. Do not mix breakers from
different options.
햳 Meter
socket with Test Block included. For socket only,
without tenant disconnect, price from Table 7.4.6.28.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-17
Super Blue Pennant Switchboards
Warehouse Stock
General
SWITCHBOARDS
12
Features
Ampere Ratings
400–600–800 Ampere Circuit
Breaker Main
400–600 Ampere Fusible
Vacu-Break Main
Voltage Ratings
120/240 Volts 1-Phase, 3-Wire
240/120 Volts 3-Phase, 4-Wire Delta
240 Volts
3-Phase, 3-Wire Delta
208Y/120 Volts 3-Phase, 4-Wire
480Y/277 Volts 3-Phase, 4-Wire
480 Volts
3-Phase, 3-Wire Delta
12-18
I.C. Ratings
The short circuit current rating is
limited to the lowest current
interrupting rating, at the supply
voltage, of any device installed. Only
Siemens breakers with short circuit
interrupting ratings equal to or greater
than the marked short circuit current
rating shall be used for replacement
or additions.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
The Super Blue Pennant service entrance
switchboard is designed to meet the
needs of main over current protection
with distribution devices for medium
duty service applications. Main service
disconnects can be either Siemens
Vacu-Break fusible switch or Siemens
molded case circuit breakers. Either
type of device provides dependable
performance with series rated
combinations available. The switchboard is
labeled as “suitable for use only as service
equipment”. Super Blue Pennant
switchboards meet EUSERC utility
requirements.
□
A NEMA Type 1 indoor or Type 3R
outdoor self-contained enclosures are
constructed of code gauge steel and
painted ANSI-61 light gray.
□
B Rating label information is clearly visible
on the equipment front panel. Danger,
short circuit rating labels and UL listing
label present necessary information to
conform with NEMA Standard PB-2.
□
C Metering and test block provisions
meet EUSERC utility specifications.
□
D Incoming main lugs are mechanical
screw-type mounted on studs
accepting a wide range of cable sizes.
□
E Barriered hot sequence utility metering
and fully bussed power company
current transformer compartment meet
EUSERC utility standards.
□
F Service disconnect can be fusible
Vacu-Break switch through 200,000 AIC
or circuit breaker with maximum rating
of 65,000 AIC at 240 volts and 50,000
AIC at 480 volts.
□
G Distribution panel kits are optional and
field addable with ratings of 400–800
amperes. Up to 40 branch circuit
provisions available, 18 branch circuit
minimum.
▪ High interrupting capacity subfeed kits
with molded case circuit breaker ratings
of 225 or 400 amperes.
▪ Series rated combinations are available.
Consult sales office.
▪ Contact sales office for warehouse
stocking locations.
Super Blue Pennant Switchboards
Type 1 — Indoor, Type 3R — Outdoor
Dimensions
Type 1 — Indoor
Type 3R — Outdoor Weatherproof
12
(
(
)
)
SWITCHBOARDS
(
2.875"
26.25"
)
3.875"
2.875"
5.875"
3.875"
2.875"
14.5"12.5"
8.75"14.5"
15.625"
2.875"
Description
Dimensions (inches)
A
B
C
Description
Dimensions (inches)
A
B
C
Without Lug Landing
46
14
12
Without Lug Landing
53
15
13
With Lug Landing
58
26
24
With Lug Landing
65
27
25
For inches / millimeters conversion, see conversion table
in Application Data section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-19
Super Blue Pennant Switchboards
Main Circuit Breaker
Selection
Main Circuit Breaker
SWITCHBOARDS
12
Main Device
Ampere
Rating
400 Ampere
Line Lugs
(2)—3⁄0-500
kcmil (Copper
or Aluminum)
Breaker Rated
65,000A IR
Symmetrical
at 240 Volts
35,000A IR
Symmetrical
at 480 Volts
Type JD6
600 Ampere
Line Lugs
(2)—3⁄0-500
kcmil (Copper
or Aluminum)
Breaker Rated
65,000A IR
Symmetrical
at 240 Volts
35,000A IR
Symmetrical
at 480 Volts
Type LD6
800 Ampere
Line Lugs
(3)—3⁄0-500
kcmil (Copper
or Aluminum)
Breaker Rated
65,000A IR
Symmetrical
at 240 Volts
50,000A IR
Symmetrical
at 480 Volts
Type MD6
Service
Voltage
Indoor
Outdoor
Meter Distribution Approximate
Weight (lbs.)
Socket Kits
Indoor Outdoor Clips
Available 햴 Indoor Outdoor
120/240; 1-Phase,
3-Wire
PB224
WPB224
4005.00 7071.00
240/120; 3-Phase,
4-Wire Delta
240; 3-Phase,
3-Wire
208Y/120; 3-Phase,
4-Wire
PB424
WPB424
5000.00 8008.00
480Y/277; 3-Phase,
4-Wire
480; 3-Phase,
3-Wire
PB444
WPB444
120/240; 1-Phase,
3-Wire
PB226
240/120; 3-Phase,
4-Wire Delta
240; 3-Phase,
3-Wire
208Y/120; 3-Phase,
4-Wire
Catalog Number
PQ2630
PQ2612
320
1050
15
PQ4630
PQ4612
335
1060
6856.00 9889.00
15
PE4630
PF4606
335
1060
WPB226
5125.00 8151.00
5
PQ2630
PQ2612
320
1050
PB426
WPB426
6981.00 10015.00
15
PQ4630
PQ4612
335
1060
480Y/277; 3-Phase,
4-Wire
480; 3-Phase,
3-Wire
PB446
WPB446 10476.00 13542.00
15
PE4630
PF4606
335
1060
120/240; 1-Phase,
3-Wire
PB228
WPB228
6612.00 9656.00
5
PQ2840
PQ2816
460
1090
PB428
WPB428
9053.00 12104.00
15
PQ4840
PQ4818
475
1090
PB448
WPB448 13909.00 16930.00
15
PE4840
PF4809
475
1090
240/120; 3-Phase,
4-Wire Delta
240; 3-Phase,
3-Wire
208Y/120; 3-Phase,
4-Wire
480Y/277; 3-Phase,
4-Wire
480; 3-Phase,
3-Wire
For inches / millimeters conversion, see conversion table
in Application Data section.
햲 Price
List Price $ 햲
5햳
햳
햳
햳 For
6-jaw requirements, order 6th clip kit
from accessories.
to Distribution Panel Kits for list prices.
= Warehouse Stock
햴 Refer
does not include load side lugs, Distribution Panel
or Subfeed Kits.
12-20
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule SWBD
Super Blue Pennant Switchboards
Main Fusible Switch
Selection
Main Fusible Switch 햲
Main Device
Ampere
Rating
Meter Distribution Approximate
Weight (Lbs)
Socket Kits
Outdoor Clips
Available 햵 Indoor Outdoor
List Price $ 햳
Indoor
Outdoor Indoor
120/240; 1-Phase,
3-Wire
PF224
WPF224
4697.00
7549.00
240/120; 3-Phase,
4-Wire Delta
240; 3-Phase,
3-Wire
208Y/120; 3-Phase,
4-Wire
PF424
WPF424
5726.00
8721.00
480Y/277; 3-Phase,
4-Wire
480; 3-Phase,
3-Wire
PF444
WPF444
6714.00
9498.00
120/240; 1-Phase,
3-Wire
PF226
WPF226
5761.00
8927.00
240/120; 3-Phase,
4-Wire Delta
240; 3-Phase,
3-Wire
208Y/120; 3-Phase,
4-Wire
PF426
WPF426
7942.00 10936.00
480Y/277; 3-Phase,
4-Wire
480; 3-Phase,
3-Wire
PF446
WPF446 10225.00 13024.00
For inches / millimeters conversion, see conversion table
in Application Data section.
햲 Fuses
햴 For
PQ2630
PQ2612
365
1094
15
PQ4630
PQ4612
375
1110
15
PE4630
PF4606
375
1110
PQ2630
PQ2612
370
1100
15
PQ4630
PQ4612
390
1110
15
PE4630
PF4606
390
1120
5햴
5햴
6-jaw requirements, order 6th clip kit
from accessories.
햵 Refer to Distribution Panel Kits for list prices.
SWITCHBOARDS
600 Ampere
Line Lugs
(2)—3⁄0-500
kcmil (Copper
or Aluminum)
200,000 AIC
maximum at
600 Volts
Catalog Number
12
400 Ampere
Line Lugs
(2)—3⁄0-500
kcmil (Copper
or Aluminum)
200,000 AIC
maximum at
600 Volts
Service
Voltage
= Warehouse Stock
not included.
does not include load side lugs, Distribution Panel
or Subfeed Kits.
햳 Price
Discount Schedule SWBD
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-21
Super Blue Pennant Switchboards
Components
Selection
SWITCHBOARDS
12
Main Device (Circuit Breaker or Fusible Switch)
Load Side Lugs — Discount Schedule SWBD
Ampere Rating
Description
Catalog Number
Wire Range
List Price $
400
600
For Fusible
Switch
LKF4
LKF6
(1)—3/0-750 kcmil (Cu or Al)
(2)—3/0-500 kcmil (Cu or Al)
227.00
227.00
400
600
800
For Circuit
Breaker
LKB4
LKB6
LKB8
(1)—600-750 kcmil (Cu or Al)
(2)—3/0-350 kcmil (Cu or Al)
(2)—600-750 kcmil (Cu or Al)
227.00
227.00
451.00
Distribution Panel Kits — Discount Schedule SWBD
Ampere
Rating
Number and Type of Breaker Poles
QP or HQ
ED4
QJ2 or QJH2
FXD6
Catalog
Number
30
—
—
—
PQ2630
12
—
12
—
PQ2612
240/120V; 3-Phase, 4-Wire Delta
240V; 3-Phase, 3-Wire
208Y/120V; 3-Phase, 4-Wire
30
—
—
—
PQ4630
12
—
12
—
PQ4612
480Y/277V; 3-Phase, 4-Wire
—
30
—
—
480V; 3-Phase, 3-Wire
—
12
—
6
40
—
—
—
PQ2840
12
—
16
—
PQ2816
40
—
—
—
PQ4840
12
—
18
—
PQ4818
Voltage
120/240V; 1-Phase, 3-Wire
400
and
600
120/240V; 1-Phase, 3-Wire
800
240/120V; 3-Phase, 4-Wire Delta
240V; 3-Phase, 3-Wire
208Y/120V; 3-Phase, 4-Wire
480V; 3-Phase, 3-Wire
List Price $
Weight
1105.00
39
1373.00
42
PE4630
1163.00
42
PF4606
1163.00
65
1806.00
65
2283.00
70
—
40
—
—
PE4840
1806.00
65
—
12
—
9
PF4809
2552.00
70
Circuit Breaker Subfeed Kits: (Breakers Not Included) — Discount Schedule SWBD
Description
Catalog Number
List Price $
For FXD6-225A 2 or 3-pole
PSFFJ6
595.00
For JXD6, JD6, HJD6 400A 2 or 3-pole
PSFJL6
913.00
For inches / millimeters conversion, see conversion table
in Application Data section.
Price
includes phase and neutral load lugs and neutral
link assembly.
FXD6 requires 3-pole space.
2-pole
12-22
Price
includes branch neutral and disconnect
link assembly. 1-pole breakers must not be connected
to “B” phase.
1-pole breakers must not be connectedto “B” phase.
2-pole breakers must be rated 240V.
FXD6 circuit breakers are limited to 225A maximum.
Price from Molded Case Circuit Breaker section.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
= Warehouse Stock
Discount Schedule SWBD
Super Blue Pennant Switchboards
Accessories
Selection
Description
Catalog Number
List Price $
Underground Pull Section or Full Height Section For Load Wiring — Discount Schedule SWBD
PUG14
WPUG14
1597.00
3370.00
26" Wide (24" opening) — indoor
27" Wide (24" opening) — outdoor
PUG26
WPUG26
1866.00
3879.00
10" Wide (load wiring)
PLW10
12
14.5" Deep 90" High
14" Wide (12" opening) — indoor
15" Wide (12" opening) — outdoor
SWITCHBOARDS
853.00
Lug Landing Kits — Discount Schedule SWBD (Requires Catalog Number PUG26 or WPUG26)
400A
1-Phase, 3-Wire or 3-Phase, 4-Wire
PLL44 햲
814.00
600A
1-Phase, 3-Wire or 3-Phase, 4-Wire
PLL46 햲
1221.00
800A
1-Phase, 3-Wire or 3-Phase, 4-Wire
PLL48 햲
1435.00
400A 250/600V
SSRK35
137.00
600A 250/600V
SSRK36
137.00
400A 250V
W49814
330.00
400A 600V
W49816
395.00
600A 240V
W49813
459.00
600A 600V
W49815
330.00
400A 240V
TFAK52
102.00
400A 600V
TFAK55
151.00
600A 240V
TFAK62
120.00
600A 600V
TFAK65
174.00
Meter Compartment Door (32" Wide x 15" High for “S” base socket with
test block cutout (order necessary meter base from items below)
PSP32
510.00
Meter Compartment Door (32" Wide x 30" High) for 2 “S” base
meters with mounting provisions for test block and printing
demand meter (order meter base from table below)
Left Hand Hinge or Right Hand Hinge
PSDP32
577.00
Blank Meter Compartment Door (32" Wide x 15" High)
PBP32
243.00
5 Clip Meter Socket with ring
PMS5
260.00
6 Clip Meter Socket with ring
PMS6
294.00
8 Clip Meter Socket with ring
PMS8
317.00
13 Clip Meter Socket with ring
PMS13
577.00
15 Clip Meter Socket with ring
PMS15
612.00
“R” Fuse Clip Adapter Kit (Set of 3) — Discount Schedule VBSS
“J” Fuse Clip Adapter Kit (Set of 3) — Discount Schedule VBSS
“T” Fuse Clip Adapter Kit (One Pole Kit) — Discount Schedule VBSS
Optional Meter Sockets and Doors — Discount Schedule SWBD
Filler Plates — Discount Schedule MCCB
QP-HQP-QJ2-QJ2H-QJH2
QF3
2.80
Handle Blocking and Padlock Devices — Discount Schedule MCCB
Blocking (QP-HQP 1, 2 and 3-pole)
QL1
Blocking (QJ2, QJ2-H, QJH2)
QJHS1
13.40
8.30
Blocking (ED2, ED4, ED6)
E2HBL
16.00
Padlock (QP-HQP)
QLD3
Padlock (QJ2, QJ2-H, QJH2)
HL9419
15.10
Padlock (ED2, ED4, ED6)
ED2HPL
16.00
PEGB42
101.00
8.40
Equipment Ground Bus –– Discount Schedule SWBD
For inches / millimeters conversion, see conversion table
in Application Data section.
Discount Schedule SWBD
햲A
PUG26 or WPUG26 Underground pull section is
required when using these lug landing kits.
= Warehouse Stock
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-23
Circuit Breaker, Fusible Application Switchboards
Circuit Breaker — BCT Service Cubicle
Selection
Service Entrance Equipment With Provisions For Metering Current Transformers
Service Entrance Circuit Breaker
SWITCHBOARDS
12
COLD SEQUENCE METERING STANDARD
For Hot Sequence Metering Invert Unit and Breaker
▪ Available with current transformer
provisions on load side and can be
inverted for current transformer
provision on line side.
▪ Tamperproof enclosure with hinged
door over current transformer
compartment with latch for utility
company sealing.
▪ Current transformer provisions are
adjustable for use with 12" or 14.5"
primary bar type current transformer.
▪ Indoor construction for floor
mounting only.
▪ All units supplied as top feed cold
metering only. Units may be field
modified as shown in the Available
Configurations listed in the table below.
▪ Listed by Underwriters Laboratories’
as suitable for use as service
equipment only.
Connectors (Per phase and neutral)
Ampere
Rating
Connectors Suitable
for Cu or Al
400A
(1)–4/0–500 kcmil or
(2)–250 kcmil
600A
(2)–4/0–500 kcmil
800A
(3)–250–500 kcmil
1000–1200A
Catalog
Number
BCT436JXD6
BCT436HJD6
BCT636LXD6
BCT636HLD6
BCT Switchboard
(4)–250–500 kcmil
List
Price $
6805.00
Symmetrical Amps
Interrupting Capacity
240V
480V
600V
65,000
35,000
25,000
10922.00 100,000
65,000
35,000
65,000
35,000
25,000
12467.00 100,000
65,000
35,000
9720.00
BCT836MXD6 12752.00
65,000
50,000
25,000
BCT836HMD6 17194.00 100,000
65,000
50,000
BCT1036NXD6 15220.00
65,000
—
—
BCT1036HND6 20066.00 100,000
—
—
BCT1236NXD6 20135.00
65,000
—
—
BCT1236HND6 25777.00 100,000
—
—
PTE
Ampere
Rating
System Voltage
400
600
800
1000
1200
1439.00 Potential Transformer Enclosure
Height
Width Depth
Top Feed
Cold Seq.
Top Feed
Hot Seq.
Bottom Feed
Cold / Hot Seq.
⻫
120/240V
1-Phase, 3-Wire
⻫
⻫
208Y/120V
3-Phase, 4-Wire
⻫
⻫
240V
3-Phase, 3-Wire
⻫
⻫
480Y/277V
3-Phase, 4-Wire
⻫
⻫
480 or 600V
3-Phase, 3-Wire
⻫
⻫
⻫
⻫
⻫
⻫
⻫
70
32
13.75
⻫
⻫
208Y/120V
3-Phase, 4-Wire
240V
3-Phase, 3-Wire
90
32
13.75
⻫
⻫
⻫
⻫
—
—
20
For inches / millimeters conversion, see conversion table
in Application Data section.
12-24
Available Configurations
Dimensions
(inches)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
20
10
= Warehouse Stock
Discount Schedule SWBD
Service Entrance Switchboards
Fusible Switch — SCT Service Cubicle
Selection
Service Entrance Fusible Switch
▪ Indoor construction for floor
mounting only.
▪ Compact tamperproof enclosure with
hinged door over current transformer
compartment with latch for utility
company sealing.
▪ Listed by Underwriters Laboratories’
as suitable for use as service
equipment only.
12
SWITCHBOARDS
▪ Quick-Make — Quick-Break Fusible dead
front switch.
▪ Interlocked door over fuses with
provisions for padlocking switch.
▪ Door over current transformer section
with latch arrangement for utility
company seal.
▪ Current transformer provisions are
adjustable for use with 12" or 14.5"
primary bar type current transformer.
Connectors (Per phase and neutral)
Ampere
Rating
Connectors Suitable
for Cu or Al
400A
(1)–4/0–500 kcmil or
(2)–250 kcmil
600A
(2)–4/0–500 kcmil
800A
(3)–250–500 kcmil
1000–1200A
(4)–250–500 kcmil
Ampere
Rating
Fuse Clip
Symmetrical Amperes
Interrupting Capacity
400–600
R
200,000
800–1200
L
100,000
Catalog Number
SCT Switchboard
List
Price $
Ampere
Rating
Dimensions
(inches)
Cold Sequence
Hot Sequence
SCT432
LSCT432
7314.00
400
120/240V
1-Phase, 3-Wire
SCT632
LSCT632
9161.00
600
208Y/120V
240V
3-Phase, 4-Wire
3-Phase, 3-Wire
SCT436
LSCT436
8516.00
400
480Y/277V
3-Phase, 4-Wire
SCT636
LSCT636
9755.00
600
480 or 600V
3-Phase, 3-Wire
SCT836
LSCT836
14244.00
800
All
—
208Y/120V
240V
3-Phase, 4-Wire
3-Phase, 3-Wire
SCT1236
LSCT1236
17695.00
For inches / millimeters conversion, see conversion table
in Application Data section.
Discount Schedule SWBD
1200
System Voltage
Height
Width
Depth
90
32
20
= Warehouse Stock
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
12-25
Switchboard Replacement and Modification Kits
SWITCHBOARDS
12
Replacement Data, Accessories, Modifications
Connecting Strap Kits 햲 — Circuit Breaker
Discount Schedule SWBD
For use with Series 5 or 6 CDP Circuit Breaker Panelboards or
FC20, FCI, FCII, CDP-6, VB-6, SB1, SB2, and SB3 Switchboards —
includes copper straps, cover plates and necessary hardware for
switchboards manufactured since 1974. Replacement strap kits
for RCIII switchboards contact your local sales office.
Breaker Type
Strap Kit
Catalog 햳
Number
BL, BLH, HBL, BQD
SBLBD
NEB, HEB
SEBD
NGB
List
Price $
Height
(inches)
Mounting
902.00
3.75
D
902.00
3.75
D
SNBD
902.00
3.75
D
ED2, ED4, ED6, HED4,
HED6, HHED6
6E62
1074.00
3.75
D
CED6
6CLE2
1074.00
3.75
D
QJ2, QJH2, QH2-H
6QJ2
1942.00
5.
D
FD6, FXD6, HFD6, HFXD6,
HHFD6, HHFXD6
6F62
1942.00
5.
D
CFD6
6CLF1
1973.00
5.
S
JXD2, JD6, JXD6, HJD6,
HJXD6, HHJD6, HHJXD6
Single Branch
6JJ61
2695.00
8.75
S
JXD2, JD6, JXD6, HJD6,
HJXD6, HHJD6, HHJXD6
Double Branch
6JJ62
2983.00
8.75
D
CJD6
6CLJ1
2695.00
8.75
S
SJD6, SHJD6
6SJL1
2695.00
8.75
SCJD6
6SCJ1
2695.00
LD6, LXD6, HLD6, HLXD6
6LL61
3207.00
CLD6
6CLL1
SLD6, SHLD6
SCLD6
Selection
Filler Plates — Discount Schedule SWBD
For use with Series 5 or 6 CDP Circuit Breaker Panelboards,
FC-20, Class II, FCI, FCII, SB1, SB2, and SB3 Switchboards.
Breaker Frame
BQ, BQH, HBQ, E2,
E4, E6, HE4, HE6,
E2-A, E4-A, E6-A,
HE4-A or HE6-A and
ED2, ED4, ED6,
HED4, HED6
Filler Plate
Catalog
Number
List Price $
Notes
QF3
2.80
Per Pole
Note: When a front filler plate is not completely filled with
breakers, the openings in the unused space must be
closed with 1-pole filler plates from table.
Connecting Strap Kits Vacu-Break 햲 and HCP
Discount Schedule SWBD
For use with VB-5, VB-6, FC-20, FC-I, FC-II, SB1, SB2 and SB3
Switchboards. Includes copper straps and necessary hardware for
Switchboards manufactured since 1974.
Ampere
Rating
Unit Height
(inches)
Catalog
Number
5, 71⁄2
5, 71⁄2
5, 71⁄2
71⁄2
71⁄2
VB657
S
30-30
30-60
60-60
60-100
100-100
8.75
S
100
71⁄2
8.75
S
200
71⁄2, 10
VB671
471.00
3207.00
8.75
S
200-200
10
VB610
511.00
6SLL1
3207.00
8.75
S
400-600
15
VB6150
211.00
6SCL1
3207.00
8.75
S
800-1200 햸
161⁄4
F6162D
1366.00
LMD6, LMXD6, HLMD6,
HLMXD6
SLM1D
3240.00
8.75
S
MD6, MXD6, HMD6,
HMXD6, CMD6
SMND
3847.00
10.
S
SMD6, SHMD6, SCMD6
SSMND
4097.00
10.
S
NM, HM, LM,
(VL Breaker)
MG1D
3317.00
8.75
S
ND6, NXD6, HND6,
HNXD6, CND6
SMND
SND6, SHND6, SCND6
SSMND
4097.00
10.
S
NN, HN, LN,
(VL Breaker)
NG1D
3939.00
10
S
3847.00
10.
S
Note: D = Denotes double branch or twin mounting
S = Denotes single mount
Disconnect
Device
Strap Kit
Catalog Number
List
Price $
NGB
SMMNGMK
135.00
HEG
SMMHEMK
135.00
BQ, BQH, HBQ
SMMBQMK
135.00
QJ2, QJH2, QJ2-H
SMMQJMK
135.00
ED4, HED4
SMMEDMK
135.00
FD6, HFD6
SMMFDMK
135.00
CED6
SMMCEMK
135.00
T-Fuse Pullout
SMMTFMK
135.00
햲 Consult
sales office for availability.
strap kit includes front filler plate.
햳 Connecting
12-26
302.00
Blank Plates — Circuit Breaker and Vacu-Break 햲
Discount Schedule SWBD
For use with Series 5 or 6 VB and CDP Panelboards, FC20, Class II,
FCI, FCII, SB1, SB2, and SB3 Switchboards.
Catalog Number
Height
(inches)
Series 6
List Price $
11⁄4
6FPB01
196.00
21⁄2
6FPB02
224.00
33⁄4
6FPB03
224.00
5
6FPB05
224.00
10
6FPB10
302.00
Note: Price breakers from circuit breaker section of this catalog.
Connecting Kits
For use with SMM and SMD metering switchboards.햶 햹
For inches / millimeters conversion, see conversion table
in Application Data section.
List
Price $
Replacement Meter Socket Kits 햶 햷
For use with SMM and SMD metering switchboards.
Type
Strap Kit
Catalog Number
List
Price $
1-Phase
MSK2001
281.00
3-Phase
MSK2003
385.00
햴 10"
plate accommodates 18 BQ or HBQ 1-pole breakers.
consist of all necessary mounting hardware, less
disconnect device and cable.
햶 Siemens meter sockets used in SMM switchboards built
after 1/91.
햵 Kits
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햷
Siemens Type WMS263 Meter Sockets are rated 200A
Continuous Duty.
Type HCP.
햹
Special order component supplied by apparatus factory.
Contact Sales for availability.
햸
Discount Schedule SWBD
13SPEEDFAX
TM
2007-2008 Switchgear
Contents
Medium Voltage Equipment
5-15 kV GM-SG and 38 kV GM38 Metal-Clad Switchgear
13-2 – 13-23
13-2 – 13-15
38 kV GIS Metal-Clad Switchgear
13-16
5-15-27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear
13-17
MV Controllers (MVC) up to 7.2 kV
Reduced Voltage Starters (FVNR, RVPR, RVAT)
Solid State Reduced Voltage Starter (SSRV)
13-19
13-20 – 13-22
SARRACS Remote Breaker Racking
Remote Circuit Breaker Controller System
Power Switching Centers
13-23
13-23
13-24
Standard Design Air Insulated
13-24
5-15-27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear
13-24
Protective Relays & SCADA Systems
SCADA/Substation Automation
SIPROTEC Protective Relays
Replacement Breakers & Retrofit Products
13-25 – 13-30
13-25
13-26 – 13-30
13-31 – 13-32
Medium Voltage Replacement Circuit Breakers
13-31
Safety Racking Solutions
13-32
Field Services
Start-up/Commissioning/Engineer-by-the-Day Services
13-33 – 13-36
13-33 – 13-34
Power System Studies
13-35
Arc Flash Study
13-36
Secondary Unit Substations
Overview
13-37 – 13-41
13-37
Transformers (See Transformer Section 7)
Dry Type
13-38
Liquid Filled Type
13-39
Transition Sections
13-40
Switchboard Secondary (See Switchboard Section 12)
13-41
Switchgear Secondary (See Low Voltage Switchgear)
13-41
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Options
13-42 – 13-53
13-42 – 13-48
13-45
Type WL Circuit Breakers
Rogowski Coil CT Technology
Electronic Trip Units
WL Communication Overview
Arc Flash Solutions
13-49
13-49 – 13-50
13-51
13-52 – 13-53
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness
hereof is not guaranteed. Since conditions of use are outside our control, the user should determine the suitability of the product for its intended use and assumes all risk and
liability whatsoever in connection herewith.
Residential Commercial Industrial
SWITCHGEAR
Arc Flash Solutions
13
Motor Protection Options
13-18 – 13-19
Medium Voltage Equipment
SWITCHGEAR
13
5-15 kV GM-SG and 38 kV GM38 Metal-Clad Switchgear
Overview
Features
Siemens 5, 7, 15 and 38kV class medium
voltage, one- or two-high vacuum circuit
breaker switchgear is of the metal-clad
type as covered by ANSI standard
C37.20.2. All parts are completely
enclosed within grounded metal barriers.
Circuit breakers are the horizontal
drawout type. Secondary control devices
and primary circuits are isolated from
each other by shutters or barriers.
Primary circuits of different potential are
also separated by barriers. All primary
bus work and joints are completely
encased with insulation material to suit
the voltage class of the equipment.
Each vertical section may contain a main
bus bar section and two compartments
for auxiliary devices and / or circuit
breakers, with primary and secondary
disconnects, instrument transformers,
instruments and relays, secondary wiring
and other necessary components. The
switchgear is designed so that additional
vertical sections with circuit breakers
and / or auxiliary compartments may be
added in the future.
The space saving potential of the 5-15kV
type GM-SG cubicle and GMSG circuit
breaker designs allows up to two
drawout elements to be furnished in a
single vertical section. The units can be
furnished with two 2000 ampere circuit
breakers in one unit. For 3000 ampere
self-cooled or 4000 ampere fan-cooled
circuit breakers, one rollout auxiliary can
be located in the lower cell, with the
circuit breaker in the upper cell; or the
cell can be left blank, with the circuit
breaker located in the lower cell.
Floor Rollout
Circuit breakers in the lower cell can be
rolled out directly on the floor in front of
the unit, without a handling device, lift
truck, or hoist for indoor and Shelter-Clad
(walk-in) outdoor installations. A lift truck
accessory is optionally available for
handling circuit breakers in the upper cell
of the 5-15kV GM-SG switchgear, or in
non-walk-in outdoor enclosures, or for
installations of switchgear on a raised
“housekeeping” pad.
Closed Door Racking
The cell mounted racking mechanism
may be operated with the cell door open
or closed, through a small opening in the
lower section of each door. For racking, a
manual drive crank or an optional electric
motor drive may be used.
Automatic Shutters
Automatically operated grounded steel
shutters are included to allow or block
access to the stationary primary
disconnects. The shutters are designed
to remain closed until they are forced
open by insertion of the circuit breaker.
This design maximizes protection for
maintenance personnel, as compared to
racking mechanism operated shutters,
which could be opened with the circuit
breaker out of the cell thereby exposing
personnel to energized components.
White Interior Device Panels in Front
Compartments Standard
5 through 15kV Available in TwoHigh Design
38kV Available in One-High Design
Only
General
Tested to ANSI Standards
Siemens switchgear is tested to meet
the requirements of ANSI standards. A
complete design test program including
short circuit interruption, load current
switching, continuous current,
mechanical endurance, close and latch
current, short time and momentary
withstand, impulse withstand, and the
other tests required by the standards has
been successfully completed. Certified
test data can be furnished to customers
upon request. These tests encompass
the complete equipment design,
including both the switchgear structure
and the circuit breaker removable
element.
4000A Rating (5–15kV)
Designs are available to 3000A selfcooled, and 4000A fan cooled.
3000A Rating (38kV)
Designs are available to 2000A selfcooled and 3000A fan cooled.
UL listing
UL listings to ANSI C37.54/C37.55
standards is optionally available.
cUL Available
50kA Interrupting Rating Available at
up to 15kV
Siemens Relays, see Relaying section
on page 13-25
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
GM-SG Overview
General
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-3
SWITCHGEAR
Maintenance Intervals
If applied under ANSl “usual service” conditions, maintenance
of the circuit breaker mechanism is only needed at ten year
intervals.
Maintenance of the switchgear cubicle is recommended at five
year intervals, and primarily consists of cleaning insulation.
Floor Rollout
No lift truck or dolly is needed to insert or remove circuit breakers
in the lower cell of switchgear located at floor level. For indoor
switchgear located on a raised “housekeeping” pad or for
outdoor non-walk-in switchgear, a lift truck is required to handle
circuit breakers.
"Universal" Spare Breaker (up to 50kA)
The physical configuration and interlock logic allow the use of a
single circuit breaker to serve as a “universal” spare breaker at
an installation site for up to 50kA. The interlock logic checks the
principal rating characteristics (continuous current, maximum
voltage, and interrupting current), and allows a circuit breaker to
be inserted in any circuit breaker cell, provided that the circuit
breaker equals or exceeds the ratings required by the cell.
Single Source Responsibility
Single source responsibility is assured since the complete
equipment is designed by Siemens and is manufactured and
tested in a single facility. The vacuum circuit breakers are
checked in the switchgear cells as part of production testing,
and shipped in the switchgear to assure interchangeability
and reduce the possibility of damage to circuit breakers in
shipment.
Full ANSI Design Background
Full design integrity is assured. ANSl C37.09 and C37.20.2
require design tests on circuit breakers and structures together.
The 3AH3 operator is produced in our global center of
competence for circuit breakers in Berlin, and final assembly
of both the drawout GMSG circuit breaker and the switchgear
structures occurs in a single facility. Siemens controls the
entire process, from design concept to production. Records
are maintained to document compliance with ANSl standards.
UL or C-UL Listing Available
Where the arrangement of components allows, UL or C-UL
Listing is available.
Quality Systems
Facilities involved with application, engineering, design and
production are certified to ISO 9001 requirements.
13
Siemens GM-SG 5kV, 7.2kV and 15kV metal-clad power
switchgear assemblies with horizontal drawout type GMSG
vacuum circuit breakers take advantage of the latest
developments in vacuum interrupter technology. Up to two
circuit breakers can be stacked in a single vertical section,
allowing significant space savings.
The equipment meets or exceeds the latest standards of ANSI,
IEEE, and NEMA.
GM-SG switchgear is designed for use in industrial plants,
commercial buildings, electric utility systems, cogeneration
installations, and other electrical systems. It is commonly
used for protection and switching of transformers, motors,
generators, capacitors, buses, distribution feeder lines, and, in
general, for protection of any medium voltage power circuit.
Siemens experience gained in over 80 years of supplying metalclad switchgear in the U.S. has been captured in the GM-SG
design. The objective has been to incorporate features designed
to provide safety, while simplifying operation, maintenance, and
minimizing installation cost.
The switchgear structure and the drawout vacuum circuit
breaker are an integrated design, with dielectric, thermal, and
interruption integrity built directly into the basic design, not
added as an afterthought.
Siemens 3AH3 Operating Mechanism
The GMSG circuit breaker uses the proven Siemens 3AH3
stored-energy operating mechanism. This operator is an
evolution of the 3A family of operators first introduced in 1976.
Over 60,000 3AH3 operating mechanisms have been produced
since 1998.
Faster Interruption
Standard interrupting time is 5-cycles with an option available
for 3-cycle interrupting time.
Siemens Vacuum Interrupters
The vacuum interrupters used in the GMSG circuit breaker are
manufactured by Siemens and have been proven in thousands
of installations since 1976. The chrome-copper contact design
used in these interrupters assures low chopping levels,
eliminating the need for surge protection on most circuits.
Front Mounted Operating Mechanism
The simple GMSG operating mechanism makes maintenance
and inspection easy. The mechanism is located on the front of
the circuit breaker, rather than underneath.
Medium Voltage Equipment
GM-SG Overview
General
Figure 1: GM-SG Switchgear 1200A or 2000A
Circuit Breaker Section
F
A
B
G
H
SWITCHGEAR
13
C
I
D
J
A
K
H
E
A. Current transformers
2 per bushing
standard accuracy
B. Upper circuit breaker
C. Isolated relay and
instrument compartment
D. Inter-unit wiring
E. Lower circuit breaker
F. Outgoing cable lugs
(downfeed shown)
G. Surge arresters
H. Ground sensor CT
I. Main bus bars
J. Removable barrier
K. Power cable duct
Structural Flexibility
Siemens GM-SG metal-clad switchgear provides enhanced
flexibility in locating circuit breaker, auxiliary, and metering cells
within the structure layout. Circuit breakers rated 1200A and
2000A may be located in upper or lower cell positions.
Bus sectionalizing (tie) circuit breaker cells may be located on
the upper or lower levels and are ordinarily located next to an
auxiliary cell on the same level to accommodate transition bus
work.
3000A circuit breakers can be located either in the bottom cell
or the top cell of a vertical section. If the 3000A circuit breaker
is located in the lower cell, the upper cell can be used for
metering devices only. If the 3000A circuit breaker is in the
upper cell, the lower cell may be used to house a set of
drawout voltage transformers, or a drawout control power
transformer, or rollout fuses for a remote control power
transformer.
The 3000A circuit breaker can be used for 4000A continuous
current applications, with the addition of fan cooling
equipment in the auxiliary cell above or below the circuit
breaker. This application of fan cooling is well suited if loads
above 3000A are infrequent, as for example, in the case of a
fan-cooled rating on a power transformer.
Each vertical section contains the main bus bar compartment
plus a rear compartment for incoming and outgoing
connections. The front portion of the vertical section contains
13-4
a central secondary device compartment, located between
two cells for auxiliary devices and / or circuit breakers,
including primary and secondary disconnects, instrument
transformers, instruments and relays, secondary wiring, and
other components as necessary. The switchgear is normally
designed so that additional vertical sections may be added in
the future.
Enclosure Design
The GM-SG design includes full ANSI/IEEE C37.20.2 MetalClad construction. This means complete enclosure of all live
parts and separation of major portions of the circuit to retard
the spread of faults to other compartments. Removable plates
permit access to all compartments. The rear panels are
individually removable to allow separate access either to
downfeed or upfeed cable connections.
The structure is constructed of bolted steel for better
dimensional control than with welded designs. Sheet steel
interunit barriers extend the full height and depth of each
vertical section for isolating adjacent sections. The ground bus
extends the entire length of the complete switchgear lineup,
and to all circuit breaker cells.
Circuit Breaker Interchangeability
The GM-SG switchgear cubicle and the removable GMSG
circuit breaker element are both built to master fixtures so
circuit breakers of the same ratings are interchangeable with
each other even if the circuit breaker is required for use with a
cell with "provisions only" supplied years earlier. The GMSG
circuit breaker is not interchangeable with the older designs.
A circuit breaker of higher rating (up to 50kA) can be used in a
cell of equal or lower rating, i.e., a 3000A 50kA 15kV circuit
breaker can be used in a 1200A 25kA 15kV circuit breaker cell.
Tested to ANSl/IEEE Standards
Siemens GM-SG switchgear is tested to meet the
requirements of ANSl/IEEE standards. A complete design test
program, including short circuit interruption, load current
switching, continuous current, mechanical endurance, close
and latch current, short time and momentary withstand,
impulse withstand, and the other tests required by the
standards has been successfully completed. These tests
encompass the complete equipment design, including both
the switchgear structure and the circuit breaker removable
element. Production tests in accordance with ANSl/IEEE
standards are performed on every group of switchgear and on
each circuit breaker. Certified copies of all test data can be
furnished to customers upon request.
The switchgear is not classified as arc-resistant switchgear,
and has not been tested for resistance to internal arcing per
IEEE C37.20.7. Qualification to seismic requirements of
various codes (e.g., IBC-2006, UBC, IEEE 693, etc.) is
available. Consult Siemens with detailed requirements.
UL or C-UL Listing Available
When specified, if the component configuration allows, the
switchgear can be provided with the UL or C-UL (for use in
Canada) listed label, indicating conformance to the
requirements of ANSl C37.54 and ANSI C37.55.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
GM-SG Vacuum Circuit Breakers
General
Type GMSG Vacuum Circuit Breakers
5kV, 7.2kV and 15kV
Side (barriers removed)
Rear
Figure 2: GMSG Circuit Breaker
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-5
SWITCHGEAR
Front
13
Siemens Type GMSG circuit breakers are available in 25kA
through 63kA* interrupting classes, or 250MVA through
1000MVA on the older “constant MVA” rating basis.
Continuous current ratings include 1200A, 2000A, and 3000A
self-cooled. 4000A is available using a 3000A circuit breaker
together with forced-air (fan) cooling in the switchgear cubicle.
*Consult factory for availability of 63kA
Maintenance Features
The GMSG circuit breakers incorporate many features
designed to reduce and simplify maintenance, including:
▪ Virtually maintenance-free vacuum interrupter
▪ Ten year maintenance interval
▪ Floor rollout
▪ Front mounted operator
▪ Common operator family
▪ Simple outer-phase barriers
▪ “Universal” spare circuit breaker concept
▪ Non-sliding current transfer
▪ Rugged secondary disconnects
Ten Year Maintenance Interval on GMSG Circuit Breaker
When applied under mild conditions (ANSI “usual service”
conditions), maintenance is only needed at ten year intervals
on the circuit breaker. The maintenance interval for the
switchgear cubicles is five years.
Low Maintenance Requirements
The interrupter is a sealed unit, so the only maintenance
necessary is to clean off any contaminants and to check the
vacuum integrity. The vacuum interrupters can be
disconnected from the stored energy mechanism quickly,
without tools, and vacuum integrity inspected by hand;
alternatively, a simple hi-pot test can be used.
Floor Rollout
When located in the lower cell, the circuit breakers are
arranged to rollout directly on the floor in front of the
switchgear if the switchgear is not located on a
“housekeeping” pad. No adapter, hoist, or lift truck is
necessary.
Mechanism Operation
The mechanism is arranged to pre-store closing energy in the
closing springs. The closing springs are selected so that they
provide sufficient energy not only to close the circuit breaker
safely into maximum "close and latch" currents, but also to
pre-store the tripping energy necessary to open the circuit
breaker. The closing springs can be manually charged during
maintenance or in emergency conditions, but are normally
charged electrically automatically after each closing operation.
Interlocks
The racking system prevents racking of a closed circuit
breaker, and keeps the circuit breaker trip-free during racking.
The racking mechanism can be padlocked to prevent
unauthorized operation. Padlocks can also be applied to the
racking mechanism to maintain the circuit breaker in the tripfree condition.
Stored Energy Operator
The GMSG circuit breaker utilizes the Siemens 3AH3 stored
energy operator for long life, high reliability, and ease of
maintenance. Parts used in the manufacture of the circuit
breaker are precision tooled or produced on numerically
controlled equipment. The circuit breaker design includes
frequent use of inherent alignment techniques.
Medium Voltage Equipment
GM-SG Ratings
Selection
Table 1: Type GMSG Circuit Breaker Ratings (New “Constant kA” Ratings Basis)
These ratings are in accordance with the following standards:
▪ ANSI/IEEE C37.04-1999 Standard Rating Structure for AC High-Voltage Circuit Breakers
▪ ANSI C37.06-2000 AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related
Required Capabilities
▪ ANSI/IEEE C37.09-1999 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
▪ ANSI/IEEE C37.010-1999 Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
Circuit Breaker Type햲
Units
Maximum Design Voltage (V)햳
kV rms
4.76
4.76
4.76
8.25
15.0
15.0
15.0
15.0
Voltage Range Factor (K)햴
—
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Power
Frequency
kV rms
19
19
19
36
36
36
36
36
Lightning
Impulse (BIL)
kV crest
60
60
60
95
95
95
95
95
Continuous햵
A rms
1200
2000
3000
4000FC
1200
2000
3000
4000FC
1200
2000
3000
4000FC
1200
2000
3000
4000FC
1200
2000
1200
2000
3000
4000FC
1200
2000
3000
4000FC
1200
2000
3000
4000FC
Short-Circuit (I)햶햷
kA rms sym
40
50
63
40
25
40
50
63
Interrupting Time햸
ms
cycles
83
5
83
5
83
5
83
5
83
5
83
5
83
5
83
5
Permissible Tripping Delay (Y)
Sec
2
2
2
2
2
2
2
2
Max. Sym. Interrupting (I)
kA rms sym
40
50
63
40
25
40
50
63
% dc Component
%
47
47
47
47
47
47
47
47
Short-Time Current (I)
(3 seconds)
kA rms
40
50
63
40
25
40
50
63
Closing & Latching
(Momentary) Asymmetrical
(1.55 x I)
kA rms
62
78
98
62
39
62
78
98
Closing & Latching
(Momentary)
Peak
(2.6 x I)
kA peak
104
130
164
104
65
104
130
164
SWITCHGEAR
13
Rated Values
5-GMSG40
xxxx-104
Withstand
Voltage Levels
햲
햳
햴
5-GMSG50
xxxx-130
5-GMSG63햹
xxxx-164
7-GMSG40
xxxx-104
15-GMSG25
xxxx-65
15-GMSG40
xxxx-104
15-GMSG50
xxxx-130
15-GMSG63햹
xxxx-164
“xxxx” in type designation refers to the continuous current rating 1200, 2000, or
3000A, as appropriate. The 4000A fan-cooled rating is achieved using a 3000A
circuit breaker, in combination with fan cooling as indicated in footnote 4.
Maximum design voltage for which the circuit breaker is designed, and the upper
limit for operation.
K is listed for informational purposes only. For circuit breakers rated on a “constant
kA basis”, the voltage range factor is 1.0.
13-6
햵
햶
햷
햸
햹
4000FC indicates that fan cooling is included in the switchgear structure for this
rating. 4000A rating is not available in outdoor equipment.
All values apply to polyphase and line-to-line faults.
Standard duty cycle is O - 0.3s - CO - 3 min. - CO.
Standard rated interrupting time is 5 cycles (83ms). Optional rated interrupting time
of 3 cycles (50ms) is available.
Consult factory for availability.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
GM-SG Ratings
Selection
Table 2: Type GMSG Circuit Breaker Control Data
햵
Control Voltages, ANSI C37.06
Range
Nominal
햴
Trip
Amperes햲
Charging
Amperes햲햴
Run (Avg.)햲
Seconds
24 VDC
19 - 28
14 - 28
5.8
17 / —
—
—
36 - 56
28 - 56
2.9
11.4 / 30
8
10
125 VDC
100 - 140
70 - 140
1.0
4.8 / 7.4
4
10
250 VDC
200 - 280
140 - 280
0.5
2.1 / 4.2
2
10
120 VAC
104 - 127
104 - 127
0.9
208 - 254
208 - 254
0.4
Current at nominal voltage.
Capacitor trip.
Value preceding slash ( / ) is the current for the standard trip coil with standard
rating interrupting time. Value following ( / ) is current for optional trip coil
with 3-cycle interrupting time.
— means this selection not available in this voltage.
—
햳
6
10
—
햳
3
10
Table 5: Current Transformers햲
Ratio
60Hz Metering Accuracy at Burden
B0.1
B0.5
B1.0
B2.0
Relay
Class
SWITCHGEAR
햵
Close
Spring Charging Motor
Amperes
13
햳
Trip Coil
48 VDC
240 VAC
햲
Close Coil
Type MD Torroidal Standard Accuracy
Table 3: Interrupting Capacity Auxiliary Switch Contacts햳
Type
Switch
Circuit
Breaker
TOC
MOC
햲
햳
Continuous
Current
Amperes
10
15
20
Control Circuit Voltage
120
AC
10
240
AC
5
15
48
DC
10 / 30햲
10
15
125
DC
5
0.5
10
0.5
10
10
250
DC
3
0.2
5
2 contacts in series.
All switch contacts are non-convertible.
Table 4: Voltage Transformers
Voltage
Class
Accuracy Class
at 120V Sec.
Ratio
X, Y, Z
5kV
5kV
5kV
15kV
15kV
15kV
15kV
2400 / 120
4200 / 120
4800 / 120
7200 / 120
8400 / 120
12000 / 120
14400 / 120
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Z
1.2
1.2
1.2
0.3
0.3
0.3
0.3
ZZ
—
VA
Thermal
Rating
500
—
500
1.2
1.2
1.2
1.2
2.4햳
—
—
—
C 15
150:5
0.6
2.4
—
—
C 20
200:5
0.6
1.2
—
—
C 25
250:5
0.6
1.2
2.4
—
C 35
300:5
0.6
0.6
1.2
2.4
C 40
400:5
0.3
0.6
1.2
2.4
C 60
500:5
0.3
0.3
0.6
1.2
C 75
600:5햴
0.3
0.3
0.6
1.2
C100
800:5
0.3
0.3
0.6
0.6
C130
1000:5
0.3
0.3
0.3
0.3
C170
1200:5햴
0.3
0.3
0.3
0.3
C200
1500:5
0.3
0.3
0.3
0.3
C200
2000:5햴
0.3
0.3
0.3
0.3
C210
2500:5
0.3
0.3
0.3
0.3
C300
3000:5햴
0.3
0.3
0.3
0.3
C240
4000:5햴
0.3
0.3
0.3
0.3
C230
75:5
2.4햳
4.8
—
—
C 20
100:5
1.2
2.4
—
—
C 30
150:5
0.6
1.2
2.4
4.8
C 40
200:5
0.6
1.2
1.2
2.4
C 60
250:5
0.3
0.6
1.2
2.4
C 80
300:5
0.3
0.6
0.6
1.2
C100
400:5
0.3
0.3
0.6
0.6
C130
500:5
0.3
0.3
0.3
0.6
C160
600:5햴
0.3
0.3
0.3
0.3
C210
800:5
0.3
0.3
0.3
0.3
C270
1000:5
0.3
0.3
0.3
0.3
C340
1200:5햴
0.3
0.3
0.3
0.3
C425
1500:5
0.3
0.3
0.3
0.3
C510
2000:5햴
0.3
0.3
0.3
0.3
C460
2500:5
0.3
0.3
0.3
0.3
C580
3000:5햴
0.3
0.3
0.3
0.3
C660
4000:5햴
0.3
0.3
0.3
0.3
C460
Type MDD Torroidal Special Accuracy
500
—
100:5
1000
1000
1000
1000
햲
햳
햴
1-second through-current and momentary current are equal to the ratings of
the associated circuit breakers.
Exceeds ANSI C37.20.2 Accuracy Limit.
Multi-ratio current transformers available. The accuracy ratings shown apply
only to the full secondary winding.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-7
Medium Voltage Equipment
GM-SG
Dimensions
Table 6: Cubicle Dimensions Per Vertical Section
햲햴
Dimensions in Inches (mm)
SWITCHGEAR
13
Type
Weight in lbs. (kg)
Height
Width
Depth
Drawout Aisle
Indoor GM-SG
95.25 (2419)
36.0 (914)
98.5 (2502)햸
72.0 (1829)
recommended햶
3300 (1497)
Shelter-Clad Single-Aisle SGM-SG
114.75 (2915)
36.0 (914)햵
173.5 (4407)햷
72.0 (1829)
included
5000 (2268)
Shelter-Clad Common Aisle SGM-SG
114.75 (2915)
36.0 (914)햵
269.0 (6833)햷
72.0 (1829)
included
8900 (4037)
Aisle-Less Non-Walk-In OGM-SG
113.62 (2886)
36.0 (914)햵
101.9 (2588)햷
72.0 (1829)
recommended햶
3950 (1792)
Table 7: GMSG Vacuum Circuit Breaker Weight in lbs. (kg)햳햴
Circuit Breaker Type
Continuous
Current (A)
햲
햳
햴
햵
햶
햷
햸
햹
5-GMSG-40
5-GMSG-250
5-GMSG-50
5-GMSG-350
5-GMSG-63
7-GMSG-40
7-GMSG-500
15-GMSG-25
15-GMSG-500
15-GMSG-40
15-GMSG-750
15-GMSG-50
15-GMSG-1000
15-GMSG-63
1200
440 (200)
455 (206)
809 (368)
455 (206)
430 (195)
445 (202)
460 (209)
819 (372)
2000
650 (295)
665 (302)
819 (372)
665 (302)
640 (290)
670 (304)
675 (306)
829 (377)
3000
665 (302)
670 (304)
824 (375)
675 (306)
—
675 (306)
680 (308)
834 (379)
Weight does not include circuit breakers, add separately from table 7.
Weight estimates are for circuit breaker only. Add 75 lbs (34 kg) if shipped separately packaged.
Weight and dimensions are approximate.
Add 6” (152 mm) to each end of lineup for aisle extension 12” (304 mm) total.
72” (1829 mm) aisle space recommended allows room for interchange of circuit breakers. Minimum aisle space required for handling circuit breaker with
lift truck is 65” (1651 mm). Minimum aisle space required if all circuit breakers are at floor level is 54” (1372 mm).
Add for roof overhang.
Shelter-Clad
Non-Walk-In
Rear (cable side)
3.62” (92 mm)
3.62” (92 mm)
Front (drawout side)
5.37” (136 mm)
1.5” (38 mm)
If indoor switchgear is installed on a raised “housekeeping” pad, the pad must not extend further than 3” (75 mm) from the front of the switchgear to avoid
interference with the use of the portable lift truck.
Approximate circuit breaker dimensions in inches (mm) (W X D X H):
Net
32” (813 mm) X 39” (991 mm) X 36” (914 mm)
If packed for shipment separate from switchgear:
42” (1067 mm) X 47” (1194 mm) X 43” (1092 mm)
13-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
GM-SG Stacking Versatility
Dimensions
Auxiliary
1200A
Circuit
Breaker
1200A
Circuit
Breaker
C
1200A
Circuit
Breaker
2000A
Circuit
Breaker
Auxiliary
A
LV Panel
A
D
LV Panel
A
A
LV Panel
LV Panel
1200A
Circuit
Breaker
2000A
Circuit
Breaker
1200A
Circuit
Breaker
13
LV Panel
E
Auxiliary
B
F
B
Auxiliary
2000A
Circuit
Breaker
2000A
Circuit
Breaker
C
Auxiliary
LV Panel
LV Panel
2000A
Circuit
Breaker
2000A
Circuit
Breaker
A
C
Auxiliary
D
LV Panel
Auxiliary
B
F
D
LV Panel
Auxiliary
Vented 햶
3000A 햶
Circuit
Breaker
E
A
LV Panel
LV Panel
Auxiliary
B
3000A 햶
Circuit
Breaker
Vented 햶
D
B
Auxiliary
Vented 햶
C
A
B
SWITCHGEAR
Auxiliary
1200A
Circuit
Breaker
E
Auxiliary
B
E
Auxiliary
F
F
Figure 3: GM-SG Stacking Versatility
Main bus sizes 1200A, 2000A, 3000A or 4000A (self-cooled).
No rollout auxiliaries allowed in upper cell (C or D) if lower cell (B) has 3000A
circuit breaker. If 3000A circuit breaker is located in upper cell (A), one
rollout auxiliary may be located in lower cell F.
햴 Auxiliary cells (C, D, E, or F) may each contain 1 rollout (except as indicated
in notes 2 and 5).
햵 Fuse rollout for stationary control power transformer must be located in
lower rollout cell F, if CPT is located in rear or is remote. If CPT is located in
lower auxiliary cell (E and F), fuse rollout is located in upper auxiliary cell.
햲
햳
For fan cooled 4000A rating, circuit breaker (3000A self-cooled, 4000A fancooled) may be located in upper cell (A) with fan cooling in cell E, or may be
located in lower cell (B) with fan cooling in cells C and D.
햷 Stacking arrangements are available as shown. Total circuit breaker loading in
a vertical unit may not exceed main bus rating. Consult Siemens for specific
application assistance regarding total load limits in each unit, or refer to
ANSI/IEEE C37.20.2.
햶
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-9
Medium Voltage Equipment
SWITCHGEAR
13
GM-SG Accessories
Standard Accessories Include:
▪ Manual racking crank
▪ Spring charging crank
▪ Drawout extension rails (facilitate handling of circuit breakers
in upper cell)
▪ Lifting sling (for circuit breakers above floor level)
▪ Split plug jumper (standard unless test cabinet is furnished)
▪ Contact lubricant
▪ Touch up paint
Optional Accessories Include:
▪ Circuit breaker lift device
▪ Test cabinet (in place of split plug jumper)
▪ Test plugs (if required by devices)
▪ Electric racking motor assembly (to enable racking while
operator is at a distance from the switchgear)
▪ Manual or electrical ground and test device
Test provisions, either a split plug jumper or a test cabinet, are
available for testing the circuit breaker outside its cubicle.
The split plug jumper is used to bridge the secondary disconnects
with a flexible cable, so the circuit breaker may be electrically
closed and tripped with the control switch on the instrument
panel while the circuit breaker is outside of its compartment. The
test cabinet, including a control switch is used for closing and
tripping the circuit breaker at a location remote from the
switchgear.
Manual Ground and Test Device
This is a drawout element that can be inserted into a circuit
breaker cell. It opens the shutters, connects to the cell primary
disconnecting contacts, and so provides a means to make the
primary disconnect stabs available for testing. It is suitable for
high potential testing of outgoing circuits of the switchgear
main bus, or for phase sequence checking. It also provides a
means to connect temporary grounds to de-energized circuits
for maintenance purposes.
The manual ground and test incorporates three-position singlepole switches (upper stabs to ground, neutral, and lower stabs
to ground), eliminating the need for user-furnished ground
cables. The switches are hook-stick operatable and are rated
for the full momentary and short-time ratings of the associated
switchgear. User-furnished grounding cables and commercially
available ground clamps seldom have ratings equal to those of
the switchgear.
General
Electrical Ground and Test Device
An electrical ground and test device includes a power operated
switch (derived from a GMSG circuit breaker) arranged to allow
grounding one set of disconnect stabs. Two devices, one each
for the upper and lower stabs, are required if grounding is
desired to either side of the unit. The device also provides a
means of access to the primary circuits for high potential tests
or for phase sequence checking. These devices are able to
close and latch against short circuit currents corresponding to
the ratings of the equipment. Due to the unique requirements
frequently involved in such devices, all applications of
electrically operated ground and test devices should be referred
to Siemens for review.
Note: Due to the special nature of ground and test devices,
each user must develop definitive operating procedures for
incorporating safe operating practices. Only qualified personnel
should be allowed to use ground and test devices.
Figure 4: Accessory Cabinet
13-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
GM-SG
Dimensions
Figure 5: Switchgear End Views
13
SWITCHGEAR
Type GM-SG Indoor Switchgear
Type OGM-SG Non-walk-in Outdoor Switchgear
Type SGM-SG Shelter-clad Single Aisle Outdoor Switchgear
Type SGM-SG Shelter-clad Common Aisle Outdoor Switchgear
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-11
Medium Voltage Equipment
SWITCHGEAR
13
38 kV GM38 Metal-Clad Switchgear
General/Specifications
▪ Highly reliable vacuum interrupters –
MTTF over 42,500 years
▪ Up to 50 full-fault interruptions
▪ Meets or exceeds the latest ANSI,
IEEE and NEMA standards
▪ Universal spare circuit breaker
▪ Interlock permits insertion of higher
rating vacuum circuit breaker into
lower rated cell but not vice-versa
▪ Front accessible circuit breaker
operating mechanism for ease of
maintenance
▪ Closed door racking
▪ Floor rollout circuit breaker in lower
cell without a dolly
Drawout Indoor Switchgear
▪ Horizontal drawout type 38-3AH
vacuum circuit breaker
▪ Uses the latest developments in
vacuum interrupter technology
Ratings
Circuit Breaker Type
Table 8 Type 38-3AH Circuit Breaker Ratings
38-3AH- 38-3AH- 38-3AHMeasured Parameter
40
1500 31
38.0
38.0
kV
38.0
General Nominal Voltage Class
Nominal 3-Phase MVA Class
—
MVA
1500
—
38.0
Max
38.0
E kV RMS
38.0
Rated
Rated
Values
Voltage
1.0
Voltage Range Factor
1.0
1.65
K
80
Low Frequency kV RMS
80
80
Insulation
Rated Withstand
Levels
Test Voltage
150
Impulse
kV Crest
150
150
1200
1200
1200
Amperes
2000
2000
2000
Continuous
3000FC
3000FC
3000FC
Rated
Short circuit (at rated max. kV)
31.5
40
I kA RMS
21
Current
5
5
5
Interrupting Time
Cycles
2
2
Permissible Tripping Delay Y
Sec.
2
38
38
23
Rated Max. Voltage Divided by K
E/K kV RMS
Related
Required
Max. Sym. Interrupting K Times Rated kA RMS
31.5
40
35
Current
CapaShort Circuit
3-Sec. Short Time
bilities
31.5
40
kA
RMS
35
Current
KI
Current Carrying
Closing and
50
62
kA RMS
56
Latching
85
104
kA Crest
95
(Momentary)
Type
38-3AH-1500 ratings are in accord with ANSI C37.06-1987. Type 38-3AH-31 and 38-3AH-40 ratings conform to
C37.06-2000 ratings.
Maximum voltage for which the circuit breaker is designed and the upper limit for operation.
K is the ratio of rated maximum voltage to the lower limit of the range of operating voltage in which the required
symmetrical and asymmetrical interrupting capabilities vary in inverse proportion to the operating voltage.
3000 ampere ratings are achieved using forced air cooling in the switchgear cubicle.
To obtain the required symmetrical interrupting capability of a circuit breaker at an operating voltage between 1/K times
rated maximum voltage and rated maximum voltage, the following formula shall be used.
Rated Maximum Voltage
Required Symmetrical Interrupting Capacity = Rated Short Circuit Current ×
Operating Voltage
For operating voltages below 1/K times rated maximum voltage, the required symmetrical interrupting capability of the
circuit breaker shall be equal to K times rated short circuit current.
With the limitations stated in 5.10 of ANSI Standard C37.04-1979, all values apply for polyphase and line-to-line faults.
For single phase-to-ground faults, the specific conditions stated in 5.10.2.3 of ANSI Standard C37.04-1979 apply.
Current values in this row are not to be exceeded even for voltages below 1/K times rated maximum voltage.
For voltages between rated maximum voltage and 1/K times rated maximum voltage, follow 5 above.
Current values in this row are independent of operating voltage up to and including rated maximum voltage.
Included for reference only—not listed in ANSI C37.06.
Table 9
Type 38-3AH Circuit Breaker Control Data
Control Voltages, ANSI C37.06 Table 10
Range
Nominal
Close
Trip
38–56
28–56
48 VDC
100–140
70–140
125 VDC
200–280
140–280
250 VDC
104–127
—
120 VAC
208–254
—
240 VAC
Current
13-12
Coil Amperes
Close
2.1
1.0
0.5
0.9
0.4
Trip
20
5.4
2.1
—
—
Spring Charging Motor
Amperes
Charging
Run (Avg.) Inrush (Peak) Seconds
8
25
10
4
18
10
2
10
10
6
—
10
3
—
10
at nominal voltage.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
▪ Visible secondary disconnect
▪ One high construction
▪ Pair with Siemens relays to match any
application
Table 10
Interrupting Capacity
Auxiliary Switch Contacts
Circuit Interrupting
Capacity in Amperes
Type
Switch
Cont.
Current
Amperes
Non-inductive
Breaker
10
TOC
15
MOC
20
Inductive
Breaker
10
TOC
15
MOC
20
Table 11
Control Circuit Voltage
120 240 48 125 250
AC AC DC DC DC
10
15
15
5
10
10
10
0.5
10
9.6
0.5
10
4.8
0.2
5
6
15
15
3
10
10
10
6
0.5 0.5
10 10
3
0.2
5
Current Transformers
60 Hz Metering Accuracy
at Burden
Ratio
B0.1
B0.5
B1.0
B2.0
Type MD38 Torroidal Standard Accuracy
100:5
2.4
—
—
—
150:5
0.6
2.4
—
—
200:5
0.6
1.2
—
—
250:5
0.6
1.2
2.4
—
300:5
0.6
1.2
1.2
2.4
400:5
0.3
0.6
1.2
1.2
500:5
0.3
0.3
0.6
1.2
600:5 햴 0.3
0.3
0.6
1.2
800:5
0.3
0.3
0.6
0.6
1000:5
0.3
0.3
0.3
0.3
1200:5 햴 0.3
0.3
0.3
0.3
1500:5
0.3
0.3
0.3
0.3
햴
2000:5
0.3
0.3
0.3
0.3
2500:5
0.3
0.3
0.3
0.3
3000:5 햴 0.3
0.3
0.3
0.3
Type MDD38 High Accuracy
75:.5
2.4 4.8
—
—
100:5
2.4 4.8
—
—
150:5
1.2
2.4
4.8
4.8
200:5
0.6
1.2
2.4
4.8
250:5
0.6
1.2
1.2
2.4
300:5
0.3
0.6
1.2
2.4
400:5
0.3
0.6
0.6
1.2
500:5
0.3
0.3
0.6
0.6
600:5 햴
0.3
0.3
0.6
0.6
800:5
0.3
0.3
0.3
0.3
1000:5
0.3
0.3
0.3
0.3
1200:5 햴 0.3
0.3
0.3
0.3
1500:5
0.3
0.3
0.3
0.3
햴
2000:5
0.3
0.3
0.3
0.3
2500:5
0.3
0.3
0.3
0.3
3000:5 햴 0.3
0.3
0.3
0.3
Relay
Class
C 10
C 20
C 25
C 35
C 40
C 60
C 75
C100
C130
C170
C200
C180
C210
C300
C300
C 15
C 20
C 35
C 50
C 70
C 90
C120
C150
C200
C250
C300
C400
C440
C450
C550
C700
1-second
through-current and momentary current are
equal to the ratings of the associated circuit breakers.
Exceeds ANSI C37.20.2 Accuracy Limit.
햴 Multi-ratio current transformers available. The
accuracy
ratings shown apply only to the full secondary winding.
Table 12
Voltage Transformers
Volt.
Class
Ratio
38kV
1 Bushing 20125:115
24000:120
38kV
2 Bushing 27600:115
34500:115
Accuracy
Class
at 120V
W,X,Y,Z ZZ
VA
Thermal
Rating
(55°C
Amb)
0.3
1.2
1000
0.3
1.2
1000
Medium Voltage Equipment
38 kV GM38 Metal-Clad Switchgear
Dimensions
Enclosure Dimensions
Table 13
Cubicle Dimensions-Per Vertical Section
Table 14 38-3AH Circuit Breaker
Weights in lbs. (kg)
Type
Indoor
Shelter-Clad
Single-Aisle
GM38
Weight
in lbs.
(kg)
5000 (2273)
SGM38
6400 (2909)
48 (1219)/
132.5 (3366)
96 (2438) Included
Shelter-Clad
Common-Aisle
SGM38
11700 (5318)
48 (1219)/
132.5 (3366)
96 (2438) Included
Aisle-Less
Non-Walk-In
OGM38
5800 (2636)
48 (1219)
130.5 (3315)
96 (2438) Recommended
Dimensions in inches (mm)
Width
Depth
48 (1219)
110 (2794)
Drawout Aisle
96 (2438) Recommended
/ Add
Add for roof overhang
Rear (Cable Side)
Front
Non-Walk-in
3.875 in. (98 mm)
6.875 in. (175 mm)
38-3AH-40
850 (387)
950 (432)
1050 (478)
Shelter-Clad
3.875 in. (98 mm)
1.5 in. (38 mm)
13
6 in. (152 mm) to each end of lineup
for aisle extension, 12 in. (305 mm) total.
Cont.
Current Circuit Breaker Type
Amps 38-3AH-1500 38-3AH-31
800 (364)
800 (364)
1200
2000
900 (409)
900 (409)
3000
1000 (455)
1000 (455)
SWITCHGEAR
End View of Indoor Switchgear
End View of Single Aisle Switchgear
Type GM38
Type SGM38
End View of Aisle-Less Outdoor Switchgear
End View of Common Aisle Switchgear
(Non Walk-In) Type OGM38
Type SGM38
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-13
Medium Voltage Equipment
38 kV GM38 Metal-Clad Switchgear
Dimensions
SWITCHGEAR
13
Floor Plans
Indoor GM38 Switchgear
Outdoor SGM38 Shelter-Clad
Walk-In Single Aisle Switchgear
Recommended location of conduits for
power cables, top or bottom.
Recommended location of secondary
leads, top or bottom.
Customer conduit not to extend more
than 1 in. (25 mm) above floor line.
Allow 6 in. (152 mm) clearance for lift
truck on each end.
Floor must be level 80 in. (2032 mm) in
front of switchgear to allow proper
operation of lift truck.
Outdoor OGM38
Non Walk-in Switchgear
Outdoor SGM38 Shelter-Clad
Walk-In Common-Aisle Switchgear
Table 15 38kV Switchgear Floor Plan Detail
Dimensions in inches (mm)
A
B
130.0
(3302)
48.0
40.0
42.5
(1219) (1016) (1080)
13-14
C
D
E
F
G
H
J
K
22.0
(559)
4.0
(102)
7.5
(191)
3.5
(89)
4.25
(108)
43.75 45.88
(1111) (1165)
L
M
N
O
P
Q
R
S
0.12
(3)
43.12
(1095)
2.82
(72)
43.75
(1111)
2.13
(54)
1.16
(29)
45.84 87.06 126.91 6.0
(1164) (2211) (3224) (152)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
T
U
V
W
X
47.5
96.0
(1207) (2438)
Medium Voltage Equipment
38 kV GM38 Metal-Clad Switchgear
Dimensions
Side Views — 1200, 2000, 3000A Breakers / Auxiliary
13
VT Auxiliary / 1200A or 2000A Breaker
(Downfeed Cables)
Auxiliary / 1200A or 2000A Breaker
CPT Fuse Truck / Stationary 3쏗 CPT
(Upfeed Cables)
Auxiliary / Bus Tie Breaker
SWITCHGEAR
Auxiliary / 1200A-3000A Breaker
(No drawout auxiliaries in upper cell for
3000A breaker)
Auxiliary / Feeder Breaker
(Adjacent to right side of tie breaker section)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-15
Medium Voltage Equipment
SWITCHGEAR
13
38 kV GIS Metal-Clad Switchgear
General/Specifications
size of conventional air insulated
switchgear.
MV Vacuum Interrupter GIS
The 8DA and 8DB – up to 38kV, 2500A,
40kA, 200kV BIL.
▪ Inherently arc-resistant
▪ Significantly reduced P.P.E. needs
▪ Compact – 80% smaller than air
insulated switchgear
▪ 20 year internal maintenance cycle
▪ Meets IEEE and IEC standards
▪ UL or C-UL Listing available
▪ Single phase design eliminates phaseto-phase faults
▪ Meets NEC visible disconnect
requirement
▪ Well suited for contaminated
environments
▪ Pair with Siemens Protective Relays
to match any application
GIS
Types 8DA10 and 8DB10 Medium
Voltage Gas-Insulated Switchgear are
gas insulated, vacuum circuit breaker
designs with a voltage range of 4.16kV
to 38kV. Lightning impulse withstand
voltage ratings up to 200kV BIL and
interrupting ratings up to 40kA are
available.
The 8DA10 and 8DB10 Medium Voltage
Gas-Insulated Switchgear designs
feature fixed-mounted vacuum circuit
breakers, connectable to the main bus
through three-position (closed-openready to ground) switches. The position
of the switches is externally observable
from the front of the unit using a
convenient camera system. Medium
Voltage Gas-Insulated Switchgear is
suitable for systems where small size,
arc resistance, environmental immunity,
or reduced maintenance needs are
important. Depending upon the voltage
rating, Medium Voltage Gas-Insulated
Switchgear is approximately 1/5 the
GIS Specification Sheet
Rated Values
8DA10 3-pole / 8DB10 3-pole
Voltage
Frequency
Short-dur. power-frequency withstand voltage
Lightning impulse withstand voltage
Short-circuit breaking current
Short-time withstand current, 3s
Short-circuit making current (peak)
Peak withstand current
Normal current of busbar
Normal current of feeders
Max. kV
kV
kV
kV
15
60 Hz
36
95
up to 40kA
up to 40kA
up to 104kA
up to 104kA
up to 4000A
up to 2500A
27
60 Hz
60
125
up to 40kA
up to 40kA
up to 104kA
up to 104kA
up to 4000A
up to 2500A
38
60 Hz
80
170; 200*
up to 40kA
up to 40kA
up to 104kA
up to 104kA
up to 4000A
up to 2500A
* On request. Consult factory
8DB Dimensions
8DA Dimensions
Bus1
Bus2
34"
34"
93"
73"
83"
15"
29"
15" 11" 13"
64"
13-16
29"
24"
24"
Front view
93"
Side view
105"
Front view
Side view
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
11" 13"
Medium Voltage Equipment
5–15–27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear
SIMOSEC
Medium voltage metal-enclosed load
interrupter indoor switchgear up to
27.6kV.
▪ Fuses and outgoing cables front
accessible
▪ Standard viewing window for visible
verification of isolating distance
▪ Standard capacitive voltage presence
indicator
▪ Integrated mechanical interlocking
▪ Animated mimic diagram
▪ Main bus at top or bottom to suit
application
▪ Configurations: individual feeder
switches, transformer primary switches
& switch lineups
▪ Ideal for utility, construction & industrial
applications
▪ Over 20 years field experience and
more than 350,000 switch-disconnector
units installed
SWITCHGEAR
Fused Switch
FS
Cable Switch
CS
13
Extremely compact footprint
Meets ANSI / IEEE C37.20.3
UL or C-uL listing available
Seismic up to Zone 4 (optional)
High switching capacity – 100
operations @ 600A
▪ Gas insulated three-position switchdisconnector, hermetically sealed for
life inside the stainless steel vessel
▪ Switch-disconnector combines the
function of a load interrupter switch
(with CLOSED-OPEN indication) and a
grounding switch (with OPENGROUND indication)
▪ HV HRC fuses and cable terminations
accessible only if the feeder grounding
switch is in the grounded position
▪
▪
▪
▪
▪
General/Specifications
Metering
MT
Cable Connection
CC
SIMOSEC Specification Sheet
Dimensions
Cable Switch
CS
Single cable or fuse
Two cables or double-barrel fuse
3
Width depends on equipment arrangement
1
Width
1
14.8" (375mm)
2
2
19.7" (500mm)
Depth
Height
Fused Switch
FS
1
14.8" (375mm)
2
19.7" (500mm)
Metering
MT
3
19.7" (500mm)
3
29.5" (750mm)
Cable Connection
CC
1
14.8" (375mm)
2
19.7" (500mm)
48.4" (1230mm)
88.6 - 100.4" (2250 - 2850mm) depending on arrangement
Ratings
Rated voltage
Rated frequency
Rated short-duration power-frequency withstand voltage
Rated lightning impulse withstand voltage (BIL)
Rated short-time withstand current
tk = rated duration of short
Maximum fused continuous current
(not fuse E rating)
Up to 5kV
50 / 60
19kV
60kV
8.25kV & 15kV
50 / 60
36kV
95kV
27.6kV
50 / 60
60kV
125kV
2 Sec
Up to 25kA
Up to 25kA
Up to 20kA
Single fuse FS-1
Double fuse FS-2
Triple fuse FS-3
325A
575A
600A
600A, 1200A
600A
600A
165A
305A
430A
600A, 1200A
600A
600A
65A
117A
156A
600A, 1200A
600A
600A
Main bus continuous
Switch-disconnector
Capacitive voltage indicator
Continuous
Interrupting
Cable discharge switch (1.6kA 1-sec) (optional)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-17
Medium Voltage Equipment
SWITCHGEAR
13
MV Controllers (MVC) up to 7.2 kV
General
The design and manufacture of the Series
81000™ meduim voltage controller unit is
based on our experience as a leading
manufacturer of motors worldwide. The
benefits of this experience result in control
scheme flexibility and increased safety,
while simplifying operations, maintenance,
and minimizing installation costs. Typical
applications include:
▪ Squirrel-Cage Induction Motors (nonreversing, reversing, and multi-speed)
▪ Reduced Voltage Starters
(autotransformer reactor or solid-state
type)
▪ Synchronous motors (brush or brushless type)
▪ Wound Rotor Motors — with or without
secondary control
▪ Transformer Feeders
▪ Capacitor Bank Feeders
▪ Power Bus Feeders (Tie)
The utilization voltage range for the
controllers is 2300 through 7200 volts AC.
The Siemens Series 81000 medium
voltage controller allows the user to
combine vacuum contactors, latched
contactors and load break switches in one
lineup. The user can also connect directly
to Siemens GM-SG Medium Voltage
switchgear without additional transition
sections. This provides extreme flexibility
in systems design.
Stationary Controllers:
▪ Full Voltage (FVNR)
▪ Reduced Voltage Primary
Reactor (RVPR)
▪ Reduced Voltage
Autotransformer (RVAT)
Load Break Switches (LBS)
Drawout Controllers:
▪ Full Voltage (FVNR)
▪ Reduced Voltage Primary Reactor
(RVPR)
▪ Reduced Voltage Autotransformer
(RVAT)
▪ Reduced Voltage Solid State (SSRV)
▪ Brushless Synchronous (BL-SYNCH)
▪ Brushtype Synchronous (BT-SYNCH)
▪ Two Speed Two Winding (2S2W)
▪ Two Speed One Winding (2S1W)
▪ Wound Rotor (WR)
▪ Reversing
General
E2 (Fused) Contactors — To meet
interrupting capability required for NEMA
Class E2 controllers, the 97H3 and 96H6
contactors are provided with primary
current limiting fuses in all three phases.
The resulting interrupting ratings are
shown in the Table 17.
Drawout
Stationary
Table 16 Controllers and Load Break Switches Selection Table
Maximum
Motor
Size
Load Break
Switch
(LBS)
Table 17
Controller
Type
2.3kV
4.16kV
6.9kV
13.8kV
Stationary
to 1500HP
to 2500HP
to 4000HP
—
Drawout
to 3000HP
to 5500HP
to 4000HP
—
SSRV
to 3000HP
to 5500HP
to 4000HP
to 5500HP
600A
Fused
Unfused
Fused
Unfused
—
Unfused
—
—
1200A
Fused
Unfused
Fused
Unfused
—
Unfused
—
—
Series 81000 Ratings
Enclosed
Continuous
Ampere
Rating
Unfused
Class E1
Fused
Class E2
Motor Horsepower Rating
(3 Phase)
Maximum
Synchronous
InducMotor
Motors
tion
Fuse
0.8 PF 1.0 PF Motors Rating
360
720
360
720
360
720
360
5kA
10kA
5kA
10kA
5kA
10kA
7.2kA
200 MVA
200 MVA
350 MVA
350 MVA
400 MVA
400 MVA
570 MVA
1500
3000
2500
5500
2500
5500
4000
Interrupting
Capacity
System
Voltage
2300
2300
4000
4000
4600
4600
1750
3500
3000
6000
3000
6000
5000
1500
3000
2500
5500
2500
5500
4000
24R
57X
24R
57X
24R
57X
24R
Transformer
Loads
Maximum
3-Phase
kVA
Maximum
Fuse
Rating
1500
2000
2500
3500
2500
4000
1500
450E
600E
450E
600E
450E
600E
200E
Nominal motor voltage 6600V.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-18
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
MV Controllers (MVC) up to 7.2 kV
General
Stationary
The Siemens Series 81000 MVC is also
offered in a stationary contactor design.
The one high stationary starters can be
configured in a reduced height (75") and
reduced width (24") stand-alone enclosure
facilitating a smaller footprint and reduced
shipping cost.
Main and Vertical Bus Construction (shown
with optional insulation)
Series 81000 Bus Ratings
Continuous
Type Bus
Amperes
Main
600
Horizontal
1000
1200
1000
1200
2000
3000
360
Vertical
540
720
600
Ground
Conductor
Size in
Inches (mm)
0.25 (6) x 3.0 (76)
0.375 (10) x 3.0 (76)
0.50 (13) x 3.0 (76)
0.25 (6) x 3.0 (76)
0.375 (10) x 3.0 (76)
2 x 0.375 (10) x 3.0 (76)
3 x 0.50 (13) x 3.0 (76)
0.25 x (6) x 1.0 (25)
0.25 (6) x 1.5 (38)
0.50 (13) x 2.0 (51)
0.25 (6) x 2.0 (51)
Conductor
Material
Aluminum
Copper
Solid State Reduced Voltage
Standard Adjustment Capabilities
▪ Soft start and stop
▪ Voltage and current ramp
Starting Methods (settable)
▪ Current limit and dual ramp
▪ Learned acceleration curve or user
defined (custom) acceleration curve
▪ Kick start and jog
Optional Features
▪ Zero sequence ground fault protection
▪ Profibus communications
Flexibility
▪ Available in lineups with up to 3000A
main bus directly connected with MetalClad Switchgear, Load Interrupter
Switches, or other Class E2 Controllers
Safety
▪ Full drawout construction means power
fuse changes are done outside of the
enclosure
Reliability
▪ Made under ISO 9001 Quality System
standards
Dependability
▪ Series 81000 Controllers have been in
production for over 20 years
UL Listed
Current
Density
(Amps/in2)
800
889
800
1333
1067
889
667
1440
1440
720
1200
3000A bus must be located on top of unit.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-19
SWITCHGEAR
Table 18
Soft Start Advantages
▪ Minimize system maintenance and
repair
▪ Reduce system downtime
▪ Increase productivity
▪ Minimize mechanical wear and tear
▪ Reduce inrush currents
▪ Reduce motor torque for prolonged
motor life
Standard Features
▪ Drawout main fused contactor (360A)
▪ Drawout main fuses with fixed-mounted
main contactor (720A)
▪ Bypass contactor
▪ Heavy duty soft start module
▪ 125% continuous duty rating (on soft
start module only)
▪ Digital microprocessor control with nonvolatile memory
▪ Fiber optic isolation
▪ Advanced electronic motor protection
▪ Metering
▪ Alphanumeric LCD display
▪ Keypad programming
▪ Modbus RTU communications
13
Power Bus
All power bus is isolated behind grounded
steel barriers. Automatic shutters are
provided to cover the line-side bus stabs
whenever a starter door is opened.
Horizontal bus ratings range from 600
through 3000 amperes and are further
detailed in Table 18. Vertical tap buses in
each section are rated 360, 540, or 720
amperes, depending on the application.
Insulated bus with boots are available as
options.
Drawout
The Siemens Series 81000 Drawout
Medium Voltage Motor Controller is a
modular design consisting of up to three
vacuum contactors per vertical section
each with three current limiting fuses, all
housed in a free-standing sheet steel
enclosure.
The completely drawout contactor
carriage (360A) includes all major power
components (vacuum contactor, power
fuses, CPT, CPT fuses) on a wheeled,
drawout carriage. The drawout contactor
carriage includes a quick disconnect plug
for secondary connections. Drawout fuse
carriages are used when loads require
720A vacuum contactors.
Contactors are available in up to three
high mounting for 5kV and 360A.
The drawout controllers are available in a
wide range of starter types, including
Solid State Reduced Voltage.
Solid State Reduced Voltage
Controller (SSRVC)
Medium Voltage Equipment
MV Controllers (MVC) up to 7.2 kV
General
Fuse Application
Table 19
Type FM Fuse Data
Maximum
Designed
Voltage
Current
Designation
2R (1 barrel)
3R
4R
6R
9R
12R
18R (2 barrel)
24R
38R
57X (3 barrel)
2R (1 barrel)
3R
4R
6R
9R
12R
18R (2 barrel)
24R
SWITCHGEAR
13
5080
7200
Continuous
Current
at 40°C
70
100
130
170
200
230
390
450
600
900
70
100
130
170
200
230
390
450
Minimum
Interrupting
Capability
190
225
330
500
740
955
1440
1910
3000
4500
190
225
330
500
740
955
1440
1910
Interrupting
Rating
50/60 Hz
Single Phase
80kA RMS
Asymmetrical
(210MVA at 2.4kV)
(415MVA at 4.8kV)
Single Phase
80kA RMS
Asymmetrical
(620MVA at 7.2kV)
Type FM Fuses Installed on 97H3 Contactor
For Non-Motor Loads
The principal application for ANSI “E”
rated fuses in Series 81000 controllers is
for non-rotating loads, such as
transformer feeders. The following
tabulation may be used for estimating
which “E” rated fuse is appropriate for a
particular 3-phase transformer
application.
Table 20 Typical Fuse Sizes
for Transformer Protection
Transformer
kVA
45
75
112.5
150
225
300
500
750
1000
1500
2000
2500
3000
Fuse Size at:
2.4kV
25E
30E
40E
50E
80E
100E
200E
250E
400E
450E
—
—
—
4.16kV
10E
15E
20E
30E
40E
65E
100E
150E
200E
300E
400E
450E
—
4.8kV
10E
15E
20E
25E
40E
50E
80E
125E
200E
250E
350E
400E
450E
6.9kV
—
10E
15E
20E
25E
40E
65E
100E
125E
200E
—
—
—
table is accurate for most typical
transformer feeder applications.
The “E” rated fuses have the same
interrupting current ratings as the type
FM or A720R “R” rated fuses. Both are
rated at 50kA symmetrical and 80kA
asymmetrical interrupting.
All medium voltage controllers employ
current limiting fuses for short circuit
protection. The term “current limiting”
derives from the operating characteristics
of the fuse. Figure 6 shows graphically
how, for maximum fault levels, the fuse
operates within the first 1/4 cycle of short
circuit current. This limits the energy “letthru” well below peak values, thus
providing “current limitation.”
Note: Fuse sizes are based on 133% overload capacity,
except 1500kVA at 2.4kV. 2500kVA at 4.16kV. and
3000kVA at 4.8kV.
Figure 6 Current Limiting Effect
Fuse ratings higher or lower than those
listed in Table 20 may be necessary if the
transformer has unusual magnetizing
(inrush) current characteristics, or for
proper coordination with the secondary
protective device (secondary fuse, low
voltage circuit breaker trip device,
overcurrent relay, etc.). Transformer
overload capability may also have a
bearing on fuse selection. However, this
A mechanical indicator “pops-out” of the
end of the fuse if the fuse has operated.
This provides a visual means for checking
the condition of the fuse, and also acts to
engage the optional blown fuse trip bar
on the 97H3 contactor.
Current designations 2R through 24R
(38R and 57X (“X” rated) for fuses on
720A) are used to distinguish one fuse
size from another within the same
voltage rating. Ampere ratings are not
13-20
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
used to identify medium voltage fuses,
since fuse selection involves many
different variables. Among these are
motor locked rotor and running current,
acceleration time, and the time current
characteristics of the overload relay used.
The fuses are installed on the top of the
97H3 vacuum contactor or on the drawout fuse carriage used with the 96H6
contactor. No fuse pullers or special tools
are required to install or replace the fuses.
Medium Voltage Equipment
MV Controllers (MVC) up to 7.2 kV
Dimensions/Specification
Table 21 MV Controllers Dimensions and Specification Sheet
Enclosure Dimensions in Inches
NEMA 1, 1A or 12
Type
Drawout or
Rating
Stationary
42
1
75/90
24
36
42
42
2
90
60/72
96/108
72/96
36
78
114
78/114
78
120
120
2
75/90
60
36
78
78
3
90
60/72
96/108
72/96
36
78
114
78/114
78
120
120
3
75/90
60
78
78
–
90
90
72
36
78
78
–
5kV / 7kV
–
90
18
24
36
36
42
42
Drawout
Synchronous Full Voltage
Non-Reversing (FVNRS)
Drawout
Synchronous Reduced
Voltage-Autotransformer
Non-Reversing (RVATS)
Drawout
Induction Full Voltage 2-Speed
2-Winding (2S2W)
Drawout
Induction Full Voltage 2-Speed
1-Winding (2S1W)
Drawout
Latched Contactor
Drawout
Solid State Reduced Voltage
Non-Reversing (SSRV)
Drawout
Consult
Also available in 45" construction for 2-high arrangement,
requires top mounted bus.
3
90
1
90
3
90
2
90
3
90
36
72
36
60/72
72/84
72/84
84/108
132/144
132
36
72
72
36
36
36
36
36
36
72
1
30
90
90
2
90
42
78
42
78
78/114
78/114
114
150
150
42
78
78
42
42
78
42
78
78/120
78/120
120
156
156
42
78
78
42
78
78
36
36
42
42
36
36
36
48
36
42
78
78
–
42
42
78
78
–
42
factory.
Typical Floor Plan Details for Class E2 Medium Voltage Controllers
Detail B — Floor Plan View — Conduit Entry Top
Detail A — Floor Plan View — Bottom Conduit Entry
Table 22
A
90.00
(2286)
K
10.06
(256)
MVC Floor Plan Dimensions in Inches (mm)
B
36.00
(914)
L
6.06
(154)
C
32.75
(832)
M
4.42
(112)
D
31.00
(787)
F
1.12
(28)
E
21.88
(556)
N
3.50
(89)
O
2.87
(73)
G
4.68
(119)
P
29.50
(749)
H
2.13
(54)
Q
68.50
(1740)
J
34.94
(887)
R
32.50
(826)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-21
SWITCHGEAR
42
13
36
–
Stationary
Induction Full
Voltage Reversing (FVR)
36
5kV
Drawout
Incoming Line Main Lugs Only
1
–
Stationary
LBS Unfused 600A or 1200A
LBS 600A Fused or
1200A/900E Fused
Depth
–
Drawout
Reduced VoltageAutotransformer
Non-Reversing (RVAT)
Width
30
90
90
36
72
72
126
36
Stationary
Reduced Voltage Primary
Reactor Non-Reversing
(RVPR)
N3RNWI
103"
Width
5kV 360A
5kV 720A
7kV 360A
5kV 360A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
5kV 360A
5kV 720A
7kV 360A
15kV 300A
5kV / 7kV
Drawout
Induction Full Voltage
Non-Reversing (FVNR)
Height
N3R-WI
107"
Width
Number of
Contactors
Medium Voltage Equipment
SWITCHGEAR
13
MV Controllers (MVC) up to 7.2 kV
Motor Protection Options
Drive motors often play a decisive role in
the functioning of a production process.
Motor damage and breakdowns not
infrequently lead also to consequential
damage and production shutdowns, the
cost of which significantly exceeds the
cost of repairing the motor. Optimum
design of the motor protection ensures
that damage following thermal overload
is prevented, meaning that there is no
reduction to the normal service life.
Secondary faults are minimized in the
event of short circuits, ground faults and
Protective Relaying
winding faults. The spectrum extends
from small low-voltage motors with an
output of a few kW to high voltage
motors with outputs measured in MW.
Protection system design must be based
on the rating of the motor, the
importance of the drive for the
technological process, the operating
conditions and the requirements of the
motor manufacturer.
Common motor protection functions and
SIPROTEC motor protective relay
selection tables are provided below.
Protection functions for various types of motor faults
Fault
Protection
ANSI Number
Stator thermal overload
Stator thermal overload protection
49
Rotor thermal overload during start
too long or blocked
too frequent
2 Protection principles for the rotor overload protection
Motor starting time supervision
Restart inhibit
48
66, 49R
Ground-fault
Ground-fault protection (I0>;U0>;<(U0,I0))
50G, 64G, 67G
Short-Circuit
Overcurrent time protection
Current differential protection
50, 51
87
Loss of phase
Negative sequence protection (I2/IN)
46
Bearing overload
Temperature sensors (RTD’s)
38
Overheating of plant on unloaded drives
(pumps, compressors)
Undercurrent protection,
Active power protection (P<)
37
32U
Undervoltage
(starting torque not reached M ~ U2 or start too long
Undervoltage protection
27
Asynchronous operation
(of a synchronous motor)
Underexcitation protection
40
Motor Protection Selection Table
Asynchronous Motor
100 kW – 500 kW
7SJ60
Basic device
7SJ61
+ more I/O’s
+ control functions
+ flexible serial interfaces
+ better local HMI
(4 line display; digital keyboard
500 kW – 2 MW
7SJ62
Basic device
+ control functions
7UM61
+ more I/O’s (7UM612)
+ control functions
+ high accuracy
+ high sensitivity
+ operating range in a wide
frequency band (11Hz - 68Hz)
or with control functions via bay mimic diagram in graphic display
7SJ63
7SJ64
Basic device
+ Synchro check function
+ high sensitivity
+ extensive control function
+ 1 serial interface more
> 2 MW
Synchronous Motor
< 2 MW
7UM61
(Option: Generator Basic)
< 10 MW
7UM62
(Option: Generator Basic)
> 10 MW
7UM62
+ differential protection
+ control functions
+ high accuracy
+ high sensitivity
+ operating range in a wide
frequency band (11Hz - 68Hz)
7UM61
+ (Option: Generator Basic)
7UM62
(Option: Generator Basic)
or with control functions via bay mimic diagram in graphic display
7SJ64
+ (Option: Generator Basic)
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Medium Voltage Equipment
Arc Flash Solutions
General
boundary, they are still at considerable
risk due to intense heat, concussion
forces and airborne debris should a fault
explosion occur. Now, by allowing
operators to remotely perform racking
procedures from a distance of up to 40
feet, SARRACS safety breaker system
from Siemens provides increased
protection for your most important
investments: your personnel and your
equipment.
Protection for your most important
investments: your personnel and your
equipment!
Incidents of serious and sometimes fatal
injury have become an all too common
occurrence when faults occur while circuit
breakers are being racked in or out on a
live bus. NFPA 70E-2004 (referenced in
OSHA 29CFR-1910-S Appendix “A”)
requires that personnel wear full-body
flash suits during racking procedures on
an energized system. However, as
operators must stand within the flash
Operator Safety
▪ Remote operation
– Personnel safely operate breaker
racking system from a distance of up to
40 feet
▪ Eliminates need for special personal
protective equipment (PPE) during
racking
– Since operator is outside the flash
boundary, a full-body flash suit is not
required
▪ Completely portable
– Ball bearing wheels, casters, and
transport handle for easy maneuvering
Medium Voltage Equipment
Arc Flash Solutions
Remote Circuit Breaker
Controller System
Alternate to Arc-Resistant switchgear
Siemens can offer a cost effective
solution that satisfies the NFPA 70E
requirements which provides improved
personnel safety when coupled with
conventional switchgear.
With the Siemens CB Controller (C7)
there is no longer a need to stand in front
of the circuit breaker cell to view circuit
breaker status, operate the circuit breaker
or view metering information. All of this
can be done from a safe distance from
the switchgear.
This places the operator or maintenance
personnel at a safe distance while they
perform these necessary functions.
Each lineup would be supplied with its
own controller as follows.
The system consists of two hardware
levels. They are the Siemens SIPROTEC
protective relays installed for each circuit
breaker in the switchgear and the touch
screen CB Controller C7 mounted remote.
The two levels are connected via a
General
Profibus communication link. All
necessary security measures are available
to prevent unauthorized usage.
Siemens will configure the system
completely and test all communication
functionality and relay data.
The above solution in conjunction with
remote circuit breaker racking (see
SARRACS above) allows for circuit
breaker operation and racking without
being in front of any circuit breaker during
the trip/close function or the racking in/out
procedure.
When operated correctly, a circuit breaker
can be tripped and racked out without
being in the flash hazard zone.
Typical scheme
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-23
SWITCHGEAR
SARRACS™ Remote Breaker
Racking
13
SARRACS (with Custom
Torque) provides the following:
Breaker Safety
®
▪ Utilizes state-of-the-art SIMATIC S7200 PLC from Siemens
– Digital position control for consistent
and accurate breaker engagement
– Customized position-torque control
provides protection to minimize
equipment damage
– Auto reverse (optional)
– Speed control
– Ramp up/ramp down
– Interface options
Flexibility
▪ Programmable to allow for varying torque
profiles and mechanical requirements of
individual circuit breakers in a lineup
▪ Mechanically adjustable to allow for
different circuit breakers in the same
lineup
▪ Portable and self-contained
– Easy to store and transport
– Strong but light (approx. 200 lb.)
▪ Designs available for most circuit
breakers
Siemens Industrial Services can provide
training and on-site modificaions if required.
Power Switching Centers
SWITCHGEAR
13
SIMOSEC Narrow Profile Gas Insulated
SIMOSEC
Medium voltage metal-enclosed load
interrupter indoor switchgear up to 27.6kV.
▪ Extremely compact footprint
▪ Meets ANSI / IEEE C37.20.3
▪ UL or C-uL listing available
▪ Seismic up to Zone 4 (optional)
▪ High switching capacity – 100 operations
@ 600A
▪ Gas insulated three-position switchdisconnector, hermetically sealed for life
inside the stainless steel vessel
▪ Switch-disconnector combines the
function of a load interrupter switch
(with CLOSED-OPEN indication) and a
grounding switch (with OPEN-GROUND
indication)
▪ HV HRC fuses and cable terminations
accessible only if the feeder grounding
13-24
switch is in the grounded position
▪ Fuses and outgoing cables front
accessible
▪ Standard viewing window for visible
verification of isolating distance
▪ Standard capacitive voltage presence
indicator
▪ Integrated mechanical interlocking
▪ Animated mimic diagram
▪ Main bus at top or bottom to suit
application
▪ Configurations: individual feeder
switches, transformer primary switches
& switch lineups
▪ Ideal for utility, construction & industrial
applications
▪ Over 20 years experience and more than
350,000 switch-disconnector units
installed
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
General
SIMOSEC Information on page 13-17
Protective Relays & SCADA Systems
SCADA Substation Automation
▪ Completely enclosed packaging; RS-485
switches mounted on outside of chassis
▪ StationManager II is completely software
compatible with StationManager I
SICAM Remote
Terminal Unit
OPC
DNP
HMI Client
SICAM Station Mngr.
Station Bus IEC 61850 (Ethernet)
Modbus, DNP,
Profibus DP
Protection,
Control,
Metering
Siemens PLC’s
Protection, Control, Metering
Peer to Peer or Goose
Capable
DNP
Protection,
Control,
Metering
Siemens Siprotec Relay (see Siprotec
specific info on page 13-26)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-25
SWITCHGEAR
ICCP Protocol Communications
▪ Unexpected events occur in the real
world. ICCP runs in “real world”
conditions
▪ Secure communications are required to
support confidentiality, integrity and
availability. ICCP/NT supports secure
communication using the ICCP PKI
security standard
▪ With critical communications, reliable
products are of utmost importance
SIPROTEC with IEC 61850 – for more
efficient power automation
SIPROTEC – the standard for numerical
protective relaying – has established itself
right across the market. Besides the
common system platform and the unique
DIGSI 4 service software that may be used
for all protective devices, it also supports
the new IEC 61850 communication
standard. A potential that offers even more
efficiency easily and conveniently.
IEC 61850 – what it is and what it can
achieve
Users and manufacturers jointly developed
the new international standard IEC 61850.
It was approved in early 2004. The agreed
aim of this standard is to arrive at a
complete communication solution for
substations, thus providing users with
interoperability among different makes on
the basis of Ethernet technology. This
opens up a whole new dimension in
efficient substation management. Not only
short-term savings in operation and
maintenance, but also simplified
engineering, less complexity, and longterm
expandability can make you one of the
winners in tomorrow’s power market.
Progress. It’s that simple.
HMI Client
Using a local or web-based HMI from the
SICAM PAS you can monitor and control all
parts of a system from a central point. The
clear display of the operating situation
allows you to react fast; you consequently
reduce your operating costs and can
quickly restore power in the event of
malfunctions. As an integrated overall
system, SICAM PAS supports you all the
way from the bay level to the control
center interface with fast data handling,
with the flexibility of a programmable-logic
controller and with the reliability philosophy
of a classic telecontrol unit. Availability and
flexibility will help you create state-of-theart, monitoring, control and protection
concepts in power automation.
13
SICAM PAS & SICAM StationManager II
SICAM PAS (Power Automation System)
can meet all the demands made of a
distributed substation control system –
both now and in the future, too. SICAM
PAS was conceived as an open system,
i.e., besides providing standardized data
transfer processes, it features user
interfaces for the integration of systemspecific tasks. SICAM PAS can thus be
integrated with ease in existing systems
and can be used for system integration.
With modern diagnostics, it optimally
supports commissioning and
maintenance. SICAM PAS is clearly
structured and reliable, thanks to its open,
fully documented and tested system.
SICAM StationManager II combines
extensive IED integration capabilities, an
IEC 1131 compliant programming
interface, some of the best configuration
and diagnostic tools in the industry, and
various advanced features like WAN
support, data encryption and HTML server
capabilities, to make it a perfect
Substation Data Concentrator.
Major Features and Benefits:
▪ Built-in power supply supporting 48 VDC,
125 VDC, and 115 VAC power inputs
▪ Three PC-104 card slots (instead of two);
Support for new EPIC processor
▪ Supports two Ethernet fiber converters;
Demodulated IRIG-B input
General
Protective Relays & SCADA Systems
SWITCHGEAR
13
SIPROTEC Protective Relays
Overview
High-performance protective relaying
comes into its own when it’s a question
of minimizing power system operationg
costs.
Uncomplicated operation, convenient
commissioning tools and flexible
communication are all important
elements when service and maintenance
costs have to be reduced. The Siemens
SIPROTEC family with its protection
relays and bay control units is an
integrated system for medium-voltage to
extra-high-voltage applications.
Numerical protection systems are nothing
new; after all, Siemens has more than 25
years experience in this field. Although
system hardware is still often referred to
as protection equipment or units – as
was once the case with analog
technology – it can now do so much
more. These relays not only handle fault
detection and location tasks but also
control, metering and monitoring
functions. And it is these additional
functions – impossible before the advent
of numerical technology – which offer
major cost-cutting potential.
General
IEC 61850
SIPROTEC — the standard for numerical
protective relaying — has established
itself right across the market. Besides the
common system platform and the unique
DIGSI 4 service interface that may be
used for all protective devices, it also
supports the new IEC 61850
communication standard. A potential that
offers more efficiency, easily and
conveniently. With SIPROTEC relays and
bay control units from Siemens we offer
all the advantages of an expert and
innovative partner in the field of
protective relaying and substation
automation. We bring you attractively
priced intelligent solutions by paying
particular attention to lowering your life
cycle and system management costs.
These solutions are the first ones
available on the market with the
international IEC 61850 standard. To
enable you to profit from these
advantages as quickly as possible,
Siemens collaborated in the preparation
of this international standard and made
every effort to ensure no time was lost in
bringing it out. The result is certainly
worth a look, because SIPROTEC and
other Power Automation products and
Siemens systems are available on the
basis of the IEC 61850 standard and can
even be retrofitted in systems supplied
since 1998.
System advantages
▪ One bay, one unit
The SIPROTEC 4 relay family offers fully
integrated protection, control, monitoring,
and automation functions incorporated in
a single device. For many applications,
this product contains all the functions you
need to meet all your protection and
control requirements with just one unit
per bay, saving on investment and
installation costs and enhancing
availability.
▪ DIGSI 4 – one tool for all tasks and
products
DIGSI 4 is a computer program designed
for all SIPROTEC relays. DIGSI 4 offers
users a universal tool for all support tasks
from setting and commissioning of
devices to simple analysis and
documentation of system faults. Our
powerful analysis tool speeds up troubleshooting and supplies important service
information.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Protective Relays & SCADA Systems
SIPROTEC Protective Relays
Selection
59
59N
59GN
64
64R
■
●
✽
■
■
■
—
—
—
—
—
■ —
— —
—
—
—
—
—
—
—
—
—
—
—
■
■
—
— —
■
■
■
■
■
■
— —
— —
—
—
—
—
—
■
— —
— ●
— —
— —
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
—
■
■
—
—
■
■
■
■
■
■
●
●
—
—
■
●
—
—
—
—
—
—
■
■
■
■
■
— —
—
—
—
— —
●
—
—
—
—
—
—
—
■
■
— —
■
■
— —
— ●
7SJ62
—
—
●
●
●
—
—
—
—
— —
— ●
— ●
— ●
●
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
—
—
■
■
■
■
■
■
■
■
■
■
— —
—
—
—
—
—
—
— —
— —
—
—
—
—
—
■
—
—
—
—
—
—
—
—
—
—
—
—
●
●
—
—
—
—
—
—
—
—
—
—
●
—
●
—
—
—
—
●
—
—
■
■
— —
— —
—
—
■
■
■
■
■
■
●
●
●
— —
—
■
■
■
■
■
■
— —
—
■
■
—
—
—
—
Breaker failure
■
■
—
—
—
—
—
—
—
—
—
—
—
—
■
■
■
●
●
■
■
—
■
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■
—
—
—
—
—
—
—
—
—
●
■
■
■
—
■
●
■
●
●
■
■
●
●
■
■
—
■
■
■
●
■
■
■
●
■
■
—
— ■
— —
— ●
— ●
— —
Synchronizing
■
■
—
—
—
—
■
—
■
—
—
—
—
—
—
—
■
■
■
—
■
■
■
■
■
■
■
—
—
—
—
■
■
●
■
■
—
● —
— —
—
●
●
—
—
—
—
—
—
—
—
—
●
●
■
—
—
●
●
—
—
●
●
■
■
■
—
—
— —
— —
—
— —
— —
— —
— —
—
—
— —
— —
—
—
—
—
—
—
—
—
—
—
—
—
— —
— —
—
—
— —
— —
—
—
— —
— —
■
■
—
●
—
—
— —
— —
—
—
— —
—
— —
—
—
—
—
—
—
— —
—
— —
—
— —
■
■
—
— —
—
●
●
■
Breaker management
Generator and
motor protection
●
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7RW600 Voltage, frequency
■
●
—
—
—
—
—
—
—
●
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7SV600
■
●
●
—
—
—
—
7VE6
■
●
●
— —
— —
7VK61
■
— —
— —
●
—
—
7UM62
■
—
■
●
—
—
—
—
—
—
—
—
—
—
7UM61
■
—
■
■
—
—
—
—
—
—
—
—
—
—
—
7SS52
7UT613
●
—
■
7SJ63
—
—
—
—
—
—
—
—
—
—
—
—
—
7SJ61
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■
7SJ602
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7SA6
— —
● —
● —
● —
— —
● —
● —
— —
— —
— —
— —
— —
— —
— —
■
7SS60
7UT612
— —
— —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— —
7UT63
7VH60
Differential
7SJ64
—
—
—
—
—
—
—
7SJ600
—
—
—
—
7SJ46
—
—
—
—
—
—
—
—
—
—
—
—
—
7SJ45
7SD610
Overcurrent
Line differential
Pilot wire differential
Distance
7SA522
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7SD5
50BF
51GN
51
51N
51V
●
7SD600
47
48
49
49R
49S
50
50N
Protection Function
Locked rotor protection
Distance protection, phase
Distance protection, earth (ground)
Fault locator
Overfluxing (V/f protection)
Synchronizing, synchronism check
Undervoltage
Stator earth-fault 3rd harmonic
Directional power
Forward power
Reverse power
Undercurrent or underpower
Loss of field
Load unbalance, negative phasesequence overcurrent
Phase-sequence voltage
Incomplete sequence, locked rotor
Thermal overload
Rotor thermal protection
Stator thermal protection
Instantaneous overcurrent
Instantaneous earth-fault
overcurrent
Breaker failure
Zero speed and underspeed device
Overcurrent-time relay, phase
Overcurrent-time relay, earth
Overcurrent-time relay,
voltage controlled
Overvoltage
Residual voltage earth-fault
protection
Stator earth-fault protection
100% Stator earth-fault
protection (20 Hz)
Rotor earth-fault
■
Standard function
Optional
ANSI/IEEE C37.2: IEEE Standard Electrical Power System Device Function Numbers
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-27
SWITCHGEAR
14
21
21N
21FL
24
25
27
27/34
32
32F
32R
37
40
46
13
ANSI Number*
ANSI Selection List for Protective Relays
Protective Relays & SCADA Systems
SIPROTEC Protective Relays
Selection
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
●
●
●
●
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— —
— —
— —
■
■
■
●
—
—
— —
— —
●
■
■
—
— —
■
■
●
✽
Standard function
Optional
ANSI/IEEE C37.2: IEEE Standard Electrical Power System Device Function Numbers
1)
Only sensitive directional earth-fault overcurrent (67Ns).
■
■
■
■
■
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■
■
■
■
●
—
—
—
—
—
—
—
■
■
■
■
■
■ —
— —
— —
—
—
—
■
■
■
■
■
■
■
■
■
■
■
●
●
●
— —
— —
— —
■
Breaker management
Breaker failure
●
— —
7RW600 Voltage, frequency
●
■
7SV600
— —
●
—
Synchronizing
—
●
■
7VE6
7UM61
—
●
—
—
—
—
—
—
7VK61
7SS60
—
●
■
Generator and
motor protection
7UT63
—
—
—
—
—
—
—
7UM62
7UT613
■
7SS52
7UT612
Differential
7SJ63
7VH60
7SJ62
7SJ64
7SJ61
— —
■
7SA6
7SJ602
■
7SJ600
7SD610
Overcurrent
Line differential
Pilot wire differential
Distance
7SA522
■
■
—
■
■
●
■
—
■
■
●
■
—
■
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■
— —
— —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
■
■
■
—
—
—
—
■
7SJ46
85
86
87G
87T
87BB
87M
87L
87N
—
■
—
— —
— —
■
—
—
—
●
●
■
—
—
—
—
—
—
—
—
—
■
—
—
—
—
—
—
—
— —
■
■
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
●
—
●
—
●
—
—
●
—
— —
—
—
—
—
—
●
■
●
—
—
—
—
— —
■
●
■
—
—
—
—
—
—
—
—
—
—
■
■
— —
—
■
■
■
■
●
■
—
■1) —
●
■
■
—
■
—
■
—
—
—
●
■
— —
— —
— —
—
—
—
— —
—
—
—
—
—
—
—
—
—
●
— —
— —
— —
— —
— —
— —
— —
● —
— —
●
—
—
—
—
—
—
—
—
—
— —
■
■
7SJ45
68
74TC
78
79
81
81R
Protection Function
Directional overcurrent
Directional earth-fault overcurrent
Stator earth-fault
directional overcurrent
Power swing detection
Trip circuit supervision
Out-of-step protection
Auto-reclosure
Frequency protection
Rate-of-frequency-change protection
Vector jump supervision
Carrier interface/remote trip
Lockout function
Differential protection generator
Differential protection transformer
Differential protection busbar
Differential protection motor
Differential protection line
Restricted earth-fault protection
7SD5
67
67N
67G
7SD600
SWITCHGEAR
13
ANSI Number*
ANSI Selection List for Protective Relays
●
●
—
—
●
●
●
—
■
■
■
●
—
—
—
—
—
—
■
—
—
—
—
—
—
—
—
—
—
—
—
■
—
■
—
●
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-28
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
■
●
—
—
—
—
—
—
—
—
—
Protective Relays & SCADA Systems
SIPROTEC Protective Relays
Selection
Siemens Protective Relays - Quick Competitor Comparison by Application
Motor Protection
Model
Siemens Equivalent
Typical Catalog Number
GE 239
SIMPRO
SIMPRO-100-R-N
GE 269
SIMPRO
SIMPRO-100-R-N
GE 269+
SIMPRO
SIMPRO-100-R-N
GE 369
SIMPRO
SIMPRO-100-R-V
GE 469
SIMPRO and 7SJ601
SIMPRO-100-R-V/7SJ6015-4EA01-0AA0
Feeder Protection
Typical Catalog Number
7SJ45 (1 three phase)
7SJ46 (1 three phase)
7SJ601 (1 three phase)
7SJ4505-1EA00-1AA1 (1 three phase)
7SJ4605-1EA00-1AA0 (1 three phase)
7SJ6015-4EA01-0AA0 (1 three phase)
ABB Microshield
7SJ600
7SJ602
7SJ61
7SJ62
7SJ6005-4EA00-0DA1
7SJ6025-4EB00-1FA0
7SJ6115-5EC90-1FA0+L0D
7SJ6215-5EC90-1FE0+L0D
ABB DPU-1500
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
ABB DPU-2000R
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
Basler BE3-51 (4 single phase)
7SJ45 (1 three phase)
7SJ46 (1 three phase)
7SJ4505-1EA00-1AA1 (1 three phase)
7SJ4605-1EA00-1AA0 (1 three phase)
Basler BE1-51 (4 single phase)
7SJ45 (1 three phase)
7SJ46 (1 three phase)
7SJ601 (1 three phase)
7SJ4505-1EA00-1AA1 (1 three phase)
7SJ4605-1EA00-1AA0 (1 three phase)
7SJ6015-4EA01-0AA0 (1 three phase)
Basler BE1-851
7SJ600
7SJ602
7SJ61
7SJ6005-4EA00-0DA1
7SJ6025-4EB00-1FA0
7SJ6115-5EC90-1FA0+L0D
Basler BE1-951
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
GE MDP
7SJ45
7SJ46
7SJ601
7SJ4505-1EA00-1AA1
7SJ4605-1EA00-1AA0
7SJ6015-4EA01-0AA0
GE 735
7SJ600
7SJ602
7SJ61
7SJ6005-4EA00-0DA1
7SJ6025-4EB00-1FA0
7SJ6115-5EC90-1FA0+L0D
GE 750
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
GE F60
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
SEL 351A
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
SEL 351
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
SEL 351S
7SJ62
7SJ63
7SJ64
7SJ6215-5EC90-1FE0+L0D
7SJ6315-5EC90-1FE0+L0D
7SJ6405-5EC92-1FE4+L0D
SEL 501
7SJ600
7SJ602
7SJ61
7SJ6005-4EA00-0DA1
7SJ6025-4EB00-1FA0
7SJ6115-5EC90-1FA0+L0D
SEL 551
7SJ600
7SJ602
7SJ61
7SJ6005-4EA00-0DA1
7SJ6025-4EB00-1FA0
7SJ6115-5EC90-1FA0+L0D
SWITCHGEAR
Siemens Equivalent
ABB CO (4 single phase)
13
Model
*Siemens catalog numbers in Bold are the preferred equivalent model.
Siemens does not accept any liability for the information contained in this document.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-29
Protective Relays & SCADA Systems
SIPROTEC Protective Relays
Selection
SWITCHGEAR
13
General Protection
Model
Siemens Equivalent
Typical Catalog Number
ABB GPU2000
7UM62
7UM6215-5EC90-0BA0+L0D
Basler BE1- GPS100
7UM61
7UM62
7UM6115-5EC90-0CA0+L0D
7UM6215-5EC90-0BA0+L0D
Beckwith M-3420
7UM61
7UM62
7UM6115-5EC90-0CA0+L0D
7UM6215-5EC90-0BA0+L0D
Beckwith M-3425
7UM62
7UM6215-5EC90-0CA0+L0D
GE 489
7UM61
7UM62
7UM6115-5EC90-0CA0+L0D
7UM6215-5EC90-0BA0+L0D
SEL 300G
7UM61
7UM62
7UM6115-5EC90-0CA0+L0D
7UM6215-5EC90-0BA0+L0D
Bus Protection
Model
Siemens Equivalent
Typical Catalog Number
ABB HU
7VH60
7VH6002-0EA20-0AA0
ABB CA
7VH60
7VH6002-0EA20-0AA0
ABB TPU2000R
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
Basler BE1-87
7UT513
7UT612
(3) 7VH60
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
7VH6002-0EA20-0AA0
GE PVD
7VH60
7VH6002-0EA20-0AA0
GE B30
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
SEL 387
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
Model
Siemens Equivalent
Typical Catalog Number
ABB HU (3)
7UT512 (1)
7UT513 (1)
7UT612 (1)
7UT5125-4GB11-0AA0
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
ABB CA (3)
7UT512 (1)
7UT513 (1)
7UT612 (1)
7UT5125-4GB11-0AA0
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
ABB TPU2000R
7UT512
7UT513
7UT612
7UT5125-4GB11-0AA0
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
Basler BE1-CDS
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
GE 745
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
GE T60
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
SEL 387
7UT513
7UT612
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
SEL 587
7UT512
7UT513
7UT612
7UT5125-4GB11-0AA0
7UT5135-4GB11-1AA0
7UT6125-5EC00-1AA0
Transformer Protection
Voltage/Frequency Protection
Model
Siemens Equivalent
Typical Catalog Number
Basler BE1-27
7RW600
7RW60000-4EA00-0DA0
Basler BE1-59
7RW600
7RW60000-4EA00-0DA0
Basler BE1-27/59
7RW600
7RW60000-4EA00-0DA0
Basler BE1-81O/U
7RW600
7RW60000-4EA00-0DA0
GE IAV
7RW600
7RW60000-4EA00-0DA0
GE IFV
7RW600
7RW60000-4EA00-0DA0
GE MIV
7RW600
7RW60000-4EA00-0DA0
GE NGV
7RW600
7RW60000-4EA00-0DA0
GE DFF
7RW600
7RW60000-4EA00-0DA0
GE MFF
7RW600
7RW60000-4EA00-0DA0
GE SFF
7RW600
7RW60000-4EA00-0DA0
*Siemens catalog numbers in Bold are the preferred equivalent model.
13-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Replacement Breakers & Retrofit Products
Medium Voltage Replacement Circuit Breakers
Siemens Medium Voltage Replacement Circuit Breakers
The following circuit breakers are available as pre-engineered designs. Other
manufacturers, models, and ratings can be engineered by Siemens.
Transformer Protection
Manufacturer
Model
Allis-Chalmers
(All Air-Magnetic)
AM
5
MB
7
MC/MCV
MA
Siemens
3AF (2-High)
15
5
5
7
15
5
7.5
15
GE
(All Air-Magnetic)
Magneblast (AMH)
Magneblast (AM)
4.16
2.4
4.16
7.2
13.8
Westinghouse
DH
5
7.5
15
DHP
ITE
5
7.5
15
HV
5
HK
7.5
15
Federal Pacific
DST2
5
7.5
15
McGraw Edison
MOP
PSD
27
15
Ratings
MVA
150
250
250
500
150
250
500
250
350
350
500
500
750
1000
250
350
500
500
750
1000
250
100
150
100
150
250
350
500
250
500
750
1000
150
250
350
500
500
750
1000
350
500
500
750, 750C
1000
100
150
250
500
500
750
1000
250
500
500
750
1000
501
502
751
AMP
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200
1200, 2000
1200, 2000
1200, 2000
1200, 2000
3000
1200, 2000, 3000
1200, 2000
1200, 2000
1200, 2000, 3000
1200, 2000
1200, 2000, 3000
1200, 2000, 3000
1200, 2000
1200, 2000
1200, 2000, 3000
600, 1200, 2000
600, 1200, 2000
600, 1200, 2000
600, 1200, 2000
600, 1200, 2000
600, 1200, 2000
1200, 2000, 3000
1200, 2000, 3000
1200, 2000
1200, 2000
1200, 2000
1200, 2000, 3000
1200, 2000
1200, 2000
3000
1200, 2000
1200, 2000
1200, 2000
1200, 2000, 3000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
600, 1200
600, 1200
600, 1200
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200, 2000
1200
1200
2000
1200
5-MSV (replacement for
Allis-Chalmers MA)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-31
SWITCHGEAR
FA
FB
FC/FCV
kV
13
Ratings from 5–38 kV, 250–1500 MVA,
1200-3000 Amperes
Replacement circuit breakers provide a
cost-effective way to upgrade your
system capabilities while saving you from
costly maintenance and lost productivity
and preserving your investment in
existing cubicles and cables.
Whether your equipment was originally
manufactured by Allis-Chalmers,
Westinghouse, GE, Federal Pacific, ITE,
or another manufacturer, we will assist
you to evaluate the Siemens replacement
options which best meet your needs.
Why Replacement Breakers?
▪ Increased Reliability and Performance
▪ Reduced Operating and Maintenance
Expenditures
▪ Reduced Downtime, Minimal
Changeover Time During Upgrade
▪ Preserved Investment in Existing
Cubicles
▪ Improved Employee and
Environmental Safety
Why Siemens?
Siemens Offers the Best Vacuum Circuit
Breaker in the Industry.
▪ Superior Performance, Longer Service
Life
– 10,000 full load operation, 10-year
maintenance cycle on replacement
circuit breakers with 3AH operator
▪ Standard Operator on All Siemens
Replacement, Medium Voltage
Distribution, and Outdoor Vacuum
Circuit Breakers
▪ Extensive Replacement Breaker
Experience – 750+ projects since
1983
– Over 400,0000 3AF/H series circuit
breakers in service worldwide
– Nuclear Class 1E Rated (350+
breakers)
▪ Full Range of Service Capabilities by
Skilled Factory-Trained Engineers and
Technicians
General
Replacement Breakers & Retrofit Products
SWITCHGEAR
13
Safety Racking Solutions
Siemens GM Switchgear Electric
Racking Accessory
An optional electric racking accessory is
available for 5-15kV GM, GM-SG, and
38kV GM38 switchgear. The switchgear
requires modifications to the front panel
to add mounting adapters for the motor
drive mechanism. The accessory
consists of a motor drive enclosure
which installs on mounting brackets on
the switchgear front panel of a circuit
breaker compartment. The unit includes
a power cord, which can be connected
to a convenient power source in the
vicinity of the switchgear. Instructions
for mounting the racking accessory and
for racking of circuit breakers are
provided on a label on the racking
accessory.
Allis-Chalmers D and F Switchgear—
Closed Door Racking Modification
In order to improve operator safety,
Siemens offers a field modification to
convert type D and F switchgear to a
closed-door, remote rack design. This
modification provides a cost effective
solution to keep operators clear of the
arc flash zone during breaker racking.
Allis-Chalmers and later Siemens
manufactured type D and F mediumvoltage switchgear from 1958 through
the late 1980’s. This gear utilized airmagnetic breakers that were typically
manually racked via a lever while the
cubicle panel door was open.
The field modification consists of a floormounted screw racking device and a
breaker-mounted bracket to interface
with the floor-mounted screw device.
These additions allow end-users to
either have closed-door manual racking,
or closed-door remote racking.
The closed-door remote racking option
requires the above mentioned cell and
breaker additions, as well as a minor
front panel modification to accept a
torque-regulated motor. The motor can
be moved from one cell position to the
next, thus only one motor device is
required.
General
Figure 7 Motor drive mounted on CB
cubicle door.
Figure 8 Power and Control switch units.
Before: Original floor-mounted lever
racking, commonly used on type D and F
switchgear, required the operator to stand
in front of the breaker with the panel door
open.
After: Following the field modification, the
breaker can be racked in and out while the
operator stands outside of the arc flash
zone.
Manuf.
Model
Allis-Chalmers
D Gear
MA
F Gear
kV
Ratings MVA
AMP
5
250
350
350
500
500
750
1000
1200,
1200,
3000
1200,
1200,
1200,
1200,
FA
5
FB
7
FC/FCV 15
2000
2000
2000, 3000
2000
2000
2000, 3000
Easily installed on existing units and can be provided for
5kV, 7.5kV, and 15kV ratings, from 1200A through 3000A.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-32
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Field Services
Start-up Commissioning Services
Check tightness of connections
Lubricate as required
Perform a contact resistance test
Perform an insulation resistance test
at 1000 volts DC from pole-to-pole and
from each pole-to-ground with breaker
closed and across open contacts of
each phase
▪ Perform secondary current injection
testing
▪ More
▪
▪
▪
▪
Low Voltage Switchgear Startup
Service
▪ Perform mechanical operational test
▪ Check cell fit and element alignment
SWITCHGEAR
Medium Voltage Switchgear Startup
Service
▪ Inspect anchorage, alignment and
grounding
▪ Check tightness of bolted bus joints
▪ Measure and record critical distances
such as contact gap
▪ Perform mechanical operation tests on
the operating mechanism
▪ Perform a contact resistance test on
the breaker vacuum contacts
▪ Perform insulation resistance tests
▪ Perform vacuum interrupter integrity
(over-potential) tests
▪ Perform insulation resistance test on
all control wiring at 1000 volts DC
▪ Verify trip, close, trip-free and antipump functions
▪ More
13
We realize that, even though our Totally
Integrated Automation® and Totally
Integrated Power® products are
designed for quick and easy installation,
your schedule may not allow you to
allocate the resources and personnel
necessary to get this equipment up and
running when it is required.
In today's business environment, staff
members are frequently overloaded, or
they may be dedicated to other projects.
Now, when you purchase new
equipment from Siemens, you can add
startup services at special rates. This will
give you the additional help required to
meet even the most pressing
deadlines... at affordable rates. You can
be confident that we will arrive at your
door with the installation experience
necessary to get your new general
purpose drives, motor control center or
switchgear properly started up and
working when you need it.
Factory-trained engineers will:
▪ Startup your newly-purchased
Siemens equipment
▪ Test for operational functionality
▪ Provide a written report detailing tests
and services
▪ Advise your team on upkeep and
maintenance.
In many cases, you will receive a oneyear parts warranty extension on your
new equipment such as:
▪ Motor control centers
▪ General purpose variable speed drives
▪ Low voltage switchgear.
Bonus:
Receive an additional one-year parts
warranty when you purchase Siemens
startup services with your new motor
control centers, general purpose variable
speed drives and/or low voltage
switchgear.
General
Switchboards and Power Switching
Centers
▪ Inspect for physical damage and
nameplate compliance with single line
diagram
▪ Perform mechanical operational test.
(circuit breakers, switches, etc.)
▪ Check cell fit and element alignment
▪ Check tightness of connections and
lubricate
▪ Perform a contact resistance test on
RL/WL/SB breakers and power switches
▪ Perform an insulation resistance test
at 1000 volts DC from pole-to-pole and
from each pole-to-ground with breaker
or switch closed and across open
contacts of each phase
▪ Perform Secondary Current Injection
Testing (RL/WL/SB breakers)
▪ More
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-33
Field Services
Start-up Commissioning Services
General
▪ Ensure incoming line power
connections comply with UL/NEC
requirements where applicable
▪ Ensure that any special motor starting
and running applications have been
considered when selecting motor
starter controls, and that main
metering is functioning properly
▪ Perform startup on drives, solid state/
soft-start starters and other equipment
▪ More
▪
▪
▪
13
▪
SWITCHGEAR
▪
Motor Control Center Startup Service
▪ Ensure that all protective devices have
been properly set and locked
▪ Review power fuse selection and
installation procedures
▪ Conduct a general physical inspection
of MCC power and control
connections. Check tightness of
connections
after installation and wiring (per
drawings)
Make final adjustments such as speed
range, acceleration/deceleration and
tuning to motor
Check starting, stopping, interlocking
and sequencing (per drawings)
Check and adjust for purchased
options such as bypass, braking, serial
communications, encoder interface,
and line filters
Verify power quality (MM440 units
only)
More
General Purpose Variable Speed
Drives Startup Service
▪ Inspect electrical and mechanical parts
Engineer-by-the-Day for new equipment purchases
*Minimum purchase required. Extended warranty
not vailable with Engineer-by-the-Day service.
Now, you can take advantage of the
expertise of a Siemens factory-trained
engineer to startup your Siemens power
distribution and control equipment
purchases.
Engineer-by-the-Day is available in
complete one-day increments for setup
of the following products*:
ACCESS power monitoring
▪
Busway
▪
13-34
▪
▪
▪
▪
▪
▪
▪
▪
Dry type transformers
Insulated case circuit breakers
Molded case circuit breakers
Panelboards
Sensitrip circuit breakers
Switchboards
Switches
More
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Siemens Energy & Automation is
committed to ensuring that your
equipment is up and running...when you
need it. Siemens Industrial Services
provides expert factoryauthorized
equipment startup at a special rate when
you purchase the service before your
product is delivered.
Get your equipment up and running on
time. Contact your local distributor or
Siemens Energy & Automation sales
office to learn more.
Field Services
Power System Studies
General/Selection
power system specialists will study the
transient response of rotating equipment
following system disturbances, and
analyze system behavior in relation to
the power company tie.
Coordination Study
Under fault conditions, systems should
isolate the faulted area to minimize
disturbance to the remaining system,
and simultaneously limit damage to
equipment. We will review the
characteristics of your protective
devices, then provide the settings
necessary to ensure that your system
functions optimally should a fault occur.
Harmonic Analysis
As AC drives have become increasingly
prevalent in industry, we have seen the
introduction of destructive harmonics to
many systems. The power quality
experts from Siemens will determine the
extent and severity of harmonics in your
system, then recommend the
appropriate means of limiting potential
damage.
Transient Stability Study
This study is particularly valuable for
facilities that generate their own power,
and those with very large motors. Our
Power Quality Assessment
With the proliferation of sensitive
electronic equipment in recent years,
power quality has become a major
concern for industry. We perform
structured, step-by-step studies with
timely diagnosis and expert solutions to
the complex challenges of utility and
end-user power quality issues.
Arc Flash Study
NFPA 70E recommends that an Arc
Flash Hazard Analysis be performed prior
to work on electrical equipment.
Siemens will determine the incident
energy levels, Arc Flash Boundary (AFB),
and required level of Personal Protective
Equipment (PPE).
Load Flow Study
This steady-state analysis of your
system’s capability to supply the
connected load will produce a listing of
real and reactive power flow in each line
or branch, and the bus voltages, under
both normal and abnormal system
conditions.
Voltage Unbalance Study
Voltage flicker and poor voltage
regulation are a common concern on
systems with large arc furnaces. The
experts from Siemens use this study to
develop comprehensive solutions that
limit the effects of voltage irregularities
and protect sensitive equipment.
In addition, the power system specialists
from Siemens also provide the following:
Power System Studies on
“Equipment Release for Manufacture”
▪ To ensure adequate interrupting rating,
and to ensure that coordination
capabilities are recognized
Streamlined Power System
Construction Studies (PSCS)
▪ For devices being installed on
construction projects
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-35
SWITCHGEAR
Short Circuit Study
Power system specialists from Siemens
will determine the maximum duty that
your system’s protective devices,
transformers, and interconnections will
be subjected to in the event of three
phase and/or line-to-ground fault
conditions. In addition, we will provide
basic information required to establish
protective relay settings.
With power system expertise and
experience that comes from real-world
successes, the specialized team of
professional engineers and certified
technicians from Siemens will help you:
▪ Minimize downtime
▪ Improve the safety of your operations
for employees and sub-contractors
▪ Optimize your system’s performance
▪ Extend your equipment’s life cycle
▪ Reallocate your valuable internal
maintenance resources to your core
business
▪ Maximize the protection of sensitive
electronics
▪ Ensure your facility complies with
applicable safety regulations
13
Protective Device Evaluation
With the objective of achieving optimum
protection, we will perform the
necessary calculations required to select
the interrupting rating of power fuses,
circuit breakers, and other protective
devices.
Grounding Study
With the goal of ensuring proper
protection and reducing the possibility of
excessive transient overvoltages during
line-to-ground faults, our engineers will
determine and recommend the most
appropriate form of system grounding
protection (including solidstate, low
resistance, and high resistance).
Field Services
Arc Flash Study
General
SWITCHGEAR
13
The Siemens solution to
minimize risks from arc flash
hazards
Arc Flash Hazards
In the fraction of a second that it takes
copper to expand to vapor, an arc flash
can generate skin-searing heat — four
times hotter than the surface of the sun.
Recent revisions to NFPA70E require
that an Arc Flash Hazard Analysis be
performed prior to working on or near
electrical equipment containing exposed
energized conductors. The analysis
determines the arc flash boundaries
(AFB), incident energy levels and the
required level of personal protective
equipment (PPE). The recommendations
in the analysis can be used to determine
hazards in your workplace. Implementing
the recommendations will help protect
your workers and help you satisfy OSHA
requirements.
Working within NFPA and IEEE
guidelines, our experienced power
systems engineers will perform
systematic and accurate Arc Flash Hazard
Studies as follows:
1. Short Circuit Calculations
Siemens will either use your data, or
make calculations for you, to identify
bolted and arcing fault levels at key
points in a power distribution system.
2. Protective Device Coordination
Using the customer’s electrical
systems coordination study, Siemens
determines the duration of the arcing
faults.
3. Arc Flash Hazard Calculations
The incident energy level, the flash
hazard boundary, and the PPE required
are then calculated for each location.
4. Documentation
The information above is compiled for
you into a comprehensive report,
which contains information necessary
to comply with regulatory
requirements.
5. Unsafe Work Locations
The report will identify work locations
having incident energy levels in excess
of available PPE ratings.
6. Arc Flash Hazard Mitigation
Recommendations will be made to
minimize Arc Flash Hazards by
changes in system protection or
operational procedures.
7. Arc Flash Hazard Labels
In addition to the report, our customers
will receive a field label containing the
flash hazard boundary distance,
incident energy level, PPE category
and shock hazard for each location.
Implementing
recommendations from a
Siemens Arc Flash Hazard
Study can bring you the
following benefits:
▪ Improve employee safety
▪ Improve your electrical system
▪ Provide safety information to
subcontractors
▪ Assist in compliance with regulations
▪ Provide you with documentation that
may bring about reductions in workers
compensation and insurance rates
Turn to Siemens for Arc Flash Hazard
Studies, comprehensive safety training
and other related services that will
enhance the safety of your personnel
and the reliability of your operation.
SARRACS — Complete arc flash
protection for switchgear racking.
After completion of your Arc Flash Hazard
Study and Equipment Labeling efforts,
why not consider another aspect to your
personnel safety initiatives? Why not
consider Siemens’ SARRACS remote
circuit breaker racking system? Racking
medium voltage circuit breakers (>1000V)
into and out of a live bus is one instance
where the PPE required may not be
adequate to protect personnel from arc
flash. Siemens SARRACS effectively
removes the operator from the arc flash
boundary by allowing for remote
installation or removal. In addition,
SARRACS provides torque monitoring to
detect improper breaker connection.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-36
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Secondary Unit Substations
Overview
General
13
Switchboard with WL Encased
Systems Breakers
Primary Switch
Liquid Filled Transformer
Type SB3 Switchboard with
Fusible Switches
Dry Type Transformer
Primary Switch
Liquid Filled Transformer
Primary Switch
Type WL Low Voltage
Switchgear
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-37
SWITCHGEAR
Siemens offers a wide variety of unit
substation designs to meet customer
requirements. A unit substation consists
of one or more transformers
mechanically and electrically connected
to and coordinated in design with one or
more switchgear or switchboard
assemblies. A secondary unit substation
is defined as a unit substation whose
outgoing section is rated below 1000
volts.
A typical secondary unit substation
consists of three sections:
▪ Primary: an incoming section that
accepts incoming high voltage (2400 to
13,800 volts) line
▪ Transformer: section that transforms
incoming voltage down to utilization
voltage (600 volts or less)
▪ Secondary: an outgoing section that
distributes power to outgoing feeders
and provides protection for these
feeders (600 volts and less)
Standard secondary unit substations
consist of:
▪ Medium Voltage Primary
▪ Transformer
▪ Low Voltage Secondary
Siemens also offers low voltage unit
substations with:
▪ Low Voltage Primary
▪ Transformer
▪ Low Voltage Secondary
The primary reason for using a secondary
unit substation is to bring power as close
as possible to the center of the loads.
Another reason is that it provides a
system design concept incorporating a
wide variety of components that permits
tailoring equipment to the needs of the
application. A secondary unit substation
provides
▪ Reduced power losses
▪ Better voltage regulation
▪ Improved service continuity
▪ Increased functional flexibility
▪ Lower installation cost
▪ Efficient space utilization
Every component and assembly of
secondary unit substations are designed
and engineered as an integral part of a
complete system.
Secondary Unit Substations
Transformers — Dry Type
Dimensions
10.5 in.
(266.7 mm)
DANGER
H + 3.25 in.
(82.6 mm)
8.0 in.
(203.2 mm)
FAN
CONTROL
PANEL
FRONT
13
2.75 in.
(69.85 mm)
GROUND
BUS
SWITCHGEAR
8.0 in.
(203.2 mm)
12.63 in.
(320.8 mm)
4.0 in. (101.6 mm)
1.81 in.
(45.97 mm)
High Voltage
Terminal
Table 23
5kV and 15kV Ventilated Dry Type Transformers
115˚C or 150˚C Temp Rise
5 kV = 30 kV BIL,
15 kV = 60 kV BIL
80˚C Temp Rise
5 kV = 30 kV BIL,
15 kV = 60 kV BIL
Approx.
Dim. in Inches (mm)
weight—
W
D
Lbs. (kg) H
90
48
48
2,200
(2286)
(1219)
(1219)
(998)
Dim. in Inches (mm)
kVA
W
D
Rating H
48
48
90
225
(1219)
(1219)
(2286)
Approx.
weight—
Lbs. (kg)
2,500
(1134)
115˚C or 150˚C Temp Rise
5 kV = 60 kV BIL,
15 kV = 95 kV BIL
Approx.
Dim. in Inches (mm)
weight—
H
W
D
Lbs. (kg)
80˚C Temp Rise
5 kV = 60 kV BIL,
15 kV = 95 kV BIL
Dim. in Inches (mm)
H
W
D
Approx.
weight —
Lbs. (kg)
—
—
—
—
—
—
—
—
300
90
(2286)
78
(1981)
48
(1219)
2,500
(1134)
90
(2286)
78
(1981)
48
(1219)
3,150
(1429)
90
(2286)
78
(1981)
48
(1219)
3,150
(1429)
90
(2286)
78
(1981)
48
(1219)
3,300
(1499)
500
90
(2286)
78
(1981)
48 햲
(1219)
3,150
(1429)
90
(2286)
78
(1981)
48 햲
(1219)
4,150
(1882)
90
(2286)
78
(1981)
48
(1219)
4,150
(1882)
90
(2286)
78
(1981)
48 햲
(1219)
4,400
(1996)
750
90
(2286)
78
(1981)
48 햲
(1219)
4,150
(1882)
90
(2286)
78
(1981)
48 햲
(1219)
5,050
(2291)
90
(2286)
90
(2286)
58
(1473)
5,100
(2313)
90
(2286)
90
(2286)
58
(1473)
5,500
(2495)
1000
90
(2286)
78
(1981)
48 햲
(1219)
5,050
(2291)
90
(2286)
78
(1981)
48 햲
(1219)
6,550
(2971)
90
(2286)
90
(2286)
58
(1473)
6,600
(2994)
90
(2286)
102
(2591)
58
(1473)
7,400
(3357)
1500
90
(2286)
90
(2286)
48 햲
(1219)
6,700
(3039)
90
(2286)
90
(2286)
48 햲
(1219)
8,050
(3652)
90
(2286)
102
(2591)
58
(1473)
8,050
(3652)
90
(2286)
112
(2845)
58
(1473)
14,000
(6350)
2000
90
(2286)
90
(2286)
58
(1473)
8,050
(3652)
90
(2286)
102
(2591)
58
(1473)
13,000
(5897)
90
(2286)
112
(2845)
58
(1473)
13,000
(5897)
102
(2591)
112
(2845)
58
(1473)
14,000
(6350)
2500
102
(2591)
112
(2845)
58
(1473)
13,000
(5897)
102
(2591)
112
(2845)
58
(1473)
16,000
(7258)
102
(2591)
112
(2845)
58
(1473)
16,000
(7258)
110
(2794)
112
(2845)
58
(1473)
16,000
(7258)
3000
110
(2794)
120
(3048)
58
(1473)
14,000
(6350)
110
(2794)
120
(3048)
58
(1473)
18,000
(8165)
110
(2794)
120
(3048)
58
(1473)
18,000
(8165)
110
(2794)
120
(3048)
58
(1473)
18,000
(8165)
Table 24
5kV and 15kV Cast Coil Type Transformers
115˚C or 80˚C 5 kV = 75 kV BIL
kVA
Rating
햲
1.81 in.
(45.97 mm)
W
Front View
Outdoor
115˚C or 80˚C Rise 15 kV = 95 kV BIL
Dim. in Inches (mm)
H
W
Weight in
Lbs. (kg)
D
Approx.
Weight in
Lbs. (kg)
Dim. in Inches (mm)
H
W
D
500
90 (2286)
90 (2286)
58 (1473)
5,200 (2359)
90 (2286)
90 (2286)
58 (1473)
5,400 (2449)
750
90 (2286)
96 (2438)
58 (1473)
6,900 (3130)
90 (2286)
96 (2438)
58 (1473)
7,200 (3266)
1000
90 (2286)
102 (2591)
58 (1473)
8,400 (3810)
90 (2286)
96 (2438)
58 (1473)
8,500 (3856)
1500
90 (2286)
108 (2743)
58 (1473)
11,200 (5080)
96 (2438)
102 (2591)
58 (1473)
12,900 (5851)
2000
102 (2591)
114 (2896)
58 (1473)
13,200 (5988)
102 (2591)
114 (2896)
58 (1473)
13,900 (6305)
2500
108 (2743)
120 (3048)
58 (1473)
15,300 (6940)
108 (2743)
120 (3048)
58 (1473)
15,900 (7212)
3000
114 (2896)
126 (3200)
58 (1473)
18,200 (8256)
114 (2896)
126 (3200)
58 (1473)
18,900 (8573)
208V secondary requires 58 in. (1473 mm) deep enclosure.
13-38
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Secondary Unit Substations
Transformers — Liquid Filled Type
Dimensions
13
SWITCHGEAR
5kV and 15kV Liquid-Filled Transformer
Table 25
kVA
Rating
500
750
1000
1500
2000
2500
Table 26
kVA
Rating
500
750
1000
1500
2000
2500
3000
3750
햲 Consult
5kV and 15kV Silicone Liquid Transformers
65°C Temp. Rise
Dimensions in Inches (mm)
A
B
70.5 (1791)
59.5 (1511)
72.5 (1842)
81.0 (2057)
74.5 (1892)
75.0 (1905)
79.5 (2019)
81.0 (2057)
79.5 (2019)
102.5 (2604)
79.5 (2019)
110.5 (2807)
C
52.00 (1321)
53.00 (1346)
56.00 (1422)
59.00 (1499)
59.00 (1499)
59.00 (1499)
D
21.50 (546)
40.50 (1029)
40.50 (1029)
40.50 (1029)
53.25 (1353)
57.25 (1454)
Weight
Lb. (kg)
4190 (1901)
6450 (2926)
7630 (3461)
9500 (4309)
12070 (5475)
14190 (6437)
55°C/65°C Temp. Rise
Dimensions in Inches (mm)
A
B
70.5 (1791)
76.0 (1930)
72.5 (1842)
81.0 (2057)
80.5 (2045)
81.0 (2057)
80.5 (2045)
103.5 (2629)
89.5 (2273)
122.5 (3112)
89.5 (2273)
130.5 (3315)
C
52.00 (1321)
53.00 (1346)
56.00 (1422)
59.00 (1499)
59.00 (1499)
59.00 (1499)
D
38.00 (965)
40.50 (1029)
40.50 (1029)
51.75 (1314)
61.25 (1556)
65.25 (1657)
55°C/65°C Temp. Rise
Dimensions in Inches (mm)
A
B
70.5 (1791)
53.5 (1359)
70.5 (1791)
75.0 (1905)
70.5 (1791)
81.0 (2057)
72.5 (1842)
81.0 (2057)
76.5 (1943)
98.5 (2502)
76.5 (1943)
106.5 (2705)
76.5 (1943)
106.5 (2705)
77.5 (1969)
124.5 (3162)
C
52.00 (1321)
53.00 (1346)
56.00 (1422)
59.00 (1499)
59.00 (1499)
59.00 (1499)
70.00 (1778)
72.00 (1829)
D
21.50 (546)
40.50 (1029)
40.50 (1029)
40.50 (1029)
49.25 (1251)
53.25 (1353)
53.25 (1353)
62.25 (1581)
Weight
Lb. (kg)
4390 (1991)
6890 (3125)
8350 (3788)
11300 (5126)
13920 (6314)
15230 (6908)
5kV and 15kV Mineral Oil Filled Transformers
65°C Temp. Rise
Dimensions in Inches (mm)
A
B
70.5 (1791)
53.5 (1359)
70.5 (1791)
58.5 (1486)
70.5 (1791)
64.5 (1638)
72.5 (1842)
64.5 (1638)
76.5 (1943)
78.0 (1981)
76.5 (1943)
84.0 (2134)
76.5 (1943)
98.5 (2502)
77.5 (1969)
108.5 (2756)
C
52.00 (1321)
53.00 (1346)
56.00 (1422)
59.00 (1499)
59.00 (1499)
59.00 (1499)
70.00 (1778)
72.00 (1829)
D
21.5 (546)
24.0 (610)
24.0 (610)
24.0 (610)
36.0 (914)
42.0 (1067)
49.25 (1251)
54.25 (1378)
Weight
Lb. (kg)
4100 (1860)
6200 (2812)
7140 (3239)
8800 (3992)
10250 (4649)
13730 (6228)
햲
햲
Weight
Lb. (kg)
4270 (1937)
6420 (2912)
7720 (3502)
9550 (4332)
10650 (4831)
14250 (6464)
햲
햲
Siemens for weight.
Note: Dimensions and weights on this page are for estimating purposes only, not for construction.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-39
Secondary Unit Substations
Transition Sections
General
SWITCHGEAR
13
A transition section is required between
the transformer and the primary section,
and between the main device section of
the switchboard for a liquid filled
transformer. Connection between the
transformer secondary and the main bus
of the switchboard is made with flexible
connectors.
Transition Section
Flexible Connectors Between Transformer Secondary and Main Bus of Switchboard
High Voltage Transition
Section Between Primary
Switch and Transformer
Table 27
Transformer
Oil, RTEmp, Silicone
Width in
Inches (mm) Depth
햲
20 (508)
Ventilated Dry Type 햳
20 (508)
햲
Outdoor Cast-Coil 햳
20 (508)
햲
햲 Same depth as primary switch section.
햳 Transition section is not required (optional).
Low Voltage Transition
Section Between
Transformer and Low
Voltage Switchboard
Table 28
Dimensions in Inches (mm)
Ventilated
Dry Type and
Liquid Filled
Cast Coil
Transformer
Transformer 햳
Amp
Rating W
D
W
D
600 20
20
햲
햲
800 (508)
(508)
10000
1200 20
20
햲
햲
1600 (508)
(508)
2000
2500 20
20
햲
햲
3000 (508)
(508)
4000
햲 Same depth as primary switch section.
햳 Transition section is not required (optional).
Switchboard secondary defines requirements.
Consult Siemens for specific requirements.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-40
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Secondary Unit Substations
▪ Switchboard Secondary
Note: See Section 12 for Switchboard Secondaries
13
SWITCHGEAR
▪ Switchgear Secondary
Note: See Pages 42-51 for WL Switchgear Secondary
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-41
Low Voltage Switchgear
SWITCHGEAR
13
Type WL Low Voltage Metal-Enclosed Switchgear
General
Siemens Type WL low voltage
metal-enclosed switchgear is designed,
constructed and tested to provide
superior power distribution, power
monitoring and control. At the heart of the
Type WL low voltage switchgear is the
World Class Siemens WL breaker.
Siemens Type WL low voltage switchgear
can be utilized in the following
applications:
▪ Industrial
▪ Institutional
▪ Critical Power
▪ Utility and co-generation
▪ Commercial
Product Scope
▪ Equipment ratings
635VAC Maximum
3-Phase 3-Wire,
3-Phase 4-Wire
50/60 Hz
6000 amp maximum horizontal bus
5000 amp maximum vertical bus
▪ Enclosure options
NEMA 1 Indoor
NEMA 3R Outdoor Walk-in
NEMA 3R Outdoor Non Walk-in
Type WL Low Voltage Metal-Enclosed Switchgear
Exclusive Features
Generator/Utility Protection Sets
24/7/365 power availability is critical for
some systems. On-site generation
capability is growing more and more
common in many systems. All of the WL
digital electronic trip units allow the
system designer to precisely tailor trip
settings for the most demanding
requirements. However, the 755 and 776
trip units allow one set of trip settings for
a fully loaded utility feed and with a
simple contact closure, the trip unit
toggles to a second trip set tailored to
provide optimal generator protection. The
wide range of settings allows the WL to
provide protection for a minimal
generator capacity for only essential
loads, through full backup for an entire
facility. This dual utility/generator
protection capability in a single circuit
breaker allows the system designer
unparalleled, costeffective flexibility.
Extended Instantaneous Protection
(EIP – Patent Pending Feature)
Another unique feature of the WL Trip
Unit, allows the system designer to
achieve full selective trip coordination up
to the short-time rating of the frame,
while also allowing application of the
breaker up to the interrupting rating of
the frame. EIP allows the WL breaker to
be applied up to the full withstand rating
of the breaker, for complete coordination,
with a minus 0% short- time band
tolerance up to 85kA on Frame Size II
and 100kA on Frame Size III. Above fault
currents of 20% higher than the full
short-time rating, the WL breaker is self
protecting, and the EIP function will trip
the breaker instantly to protect the frame
and the system from these extremely
high currents, as high as 150 kA on
Frame Size III. One added benefit is that
arc flash energy is greatly reduced in this
high current region due to the
instantaneous trip response that EIP
provides.
Industry Standards
Type WL switchgear with power circuit
breakers are designed, tested and
constructed in accordance with:
▪ UL 1558—Metal-Enclosed Low Voltage
Power Circuit Breaker Switchgear
▪ ANSI C37.20.1—Metal-Enclosed Low
Voltage Power Circuit Breaker
Switchgear
WL drawout circuit breakers are designed
for continuous operation at 100% of their
current rating without the need for
external heat sinks, and are in accordance
with:
▪ UL 1066—Low Voltage AC and DC
Power Circuit Breakers Used in
Enclosures
▪ ANSI C37.13—Low Voltage AC Power
Circuit Breakers Used in Enclosures
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-42
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Specifications
WL Low Voltage Metal-Enclosed Switchgear Features & Benefits
Frame Rating
Rating Designation
Interrupting Current Ics
(kAIR RMS) 50/60 Hz
Frame Size II
1600
800
254VAC
2000
3200
N
S
H
L
F
N
S
H
L
F
S
H
L
F
S
H
L
50
65
85
100
200
50
65
85
100
200
65
85
100
200
65
85
100
508VAC
50
65
85
100
200
50
65
85
100
200
65
85
100
200
65
85
100
635VAC
50
65
65
85
200
50
65
65
85
200
65
65
85
200
65
65
85
(kA RMS) 50/60 Hz
0.5s
50
65
65
85
20
50
65
65
85
20
65
65
85
20
65
65
85
Extended Instantaneous
285-
Short-time Withstand
Current lcw
Protection
508VAC
50
65
85
100
200
50
65
85
100
200
65
85
100
200
65
85
100
(kA RMS - 0% to 20+%)
635VAC
50
65
65
85
200
50
65
65
85
200
65
65
85
200
65
65
85
50
65
65
85
75
50
65
65
85
75
65
65
85
75
65
65
85
Close & Latch Ratings
(kA RMS) 50/60 Hz
Rating Plug Range
200A to 800A
200A to 1600A
200A to 2000A
200A to 3200A
Endurance Rating
(switching operations
with maintenance)
햲
Mech.
15,000
15,000
15,000
15,000
Elec.
15,000
15,000
15,000
15,000
Frame Size III
Frame Rating
Rating Designation
Interrupting Current Ics
(kAIR RMS) 50/60 Hz
3200
4000
5000
M
F
H
L
M
F
H
L
M
F
254VAC
150
200
85
100
150
200
85
100
150
200
508VAC
150
200
85
100
150
200
85
100
150
200
635VAC
85
200
85
85
85
200
85
85
85
200
0.5s
100
40
85
100
40
85
100
Short-time Withstand
Current lcw
(kA RMS) 50/60 Hz
햳
햳
햳
100
햳
햳
100
40
Extended Instantaneous 254VAC
Protection
508VAC
150
200
85
100
150
200
85
100
150
200
(kA RMS - 0% to 20+%)
635VAC
85
200
85
85
85
200
85
85
85
200
40
85
100
40
85
100
Close & Latch Ratings
햳
(kA RMS) 50/60 Hz
100
Rating Plug Range
800A to 3200A
햳
햳
100
800A to 4000A
햳
햳
100
40
800A to 5000A
Endurance Rating
(switching operations
with maintenance)
햲 Maintenance
햲
Mech.
10,000
10,000
10,000
Elec.
10,000
10,000
10,000
means: Replacing main contacts and arc chutes (see operating instructions).
Main contacts in breakers with Rating Designation M can only be replaced by Siemens
personnel.
햳 Do
not apply breaker at 635V AC on a system with available fault current > 85kA RMS.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-43
SWITCHGEAR
Breaker Ratings
13
▪ Breaker racking handle integral to the breaker
▪ All breaker settings and displays clearly visible with breaker
door closed
▪ Field installable “drop in place” accessories and trip units
▪ Same accessories work for entire breaker line
▪ ModBus, ProfiBus and Ethernet communication
▪ Field installable ground fault protection and zone selective
interlock
▪ Rogowski coil current sensors provide high metering accuracy
and prevent saturation at high current levels
▪ Dynamic Arc Flash Sentry (DAS) and EIP (Extended
Instantaneous Protection) are patent pending features from
Siemens that greatly reduce Arc Flash Energy
▪ Control and communication termination area located in front
of equipment and segregated from power cable termination
area that is located in rear of equipment
▪ Front accessible vertical and horizontal wiring channels
▪ Easy access to control and communication connections
through separate front door
▪ No heat sinks on breaker or bus
▪ No front-breaker door ventilation
▪ 100kA bus bracing standard - 150kA and 200kA optional
▪ Insulated/isolated bus through 6000 amps
▪ Three levels of horizontal bus through 5000 amps
▪ Modular design for maximum configuration flexibility
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
SWITCHGEAR
13
Main and Ground Bus
The standard main bus is silver-plated
copper. Tin-plated copper bus is optionally available. Vertical and horizontal
bus bar utilize a channel shape design
to maximize short circuit withstand
capability and minimize heat rise. All
bus joints include Grade 5 bolts and
conical spring washers. Provisions
for future extension of the main bus
include plated joints and high tensile
strength steel hardware.
The main three phase horizontal bus
is arranged vertically one phase above
the other with edge-to-edge alignment
to provide high, short circuit strength.
Insulated main bus with isolated vertical
bus is optional.
General
Control and Communication Wiring
Standard control and communication
wiring is #14 AWG extra-flexible, stranded
copper type SIS. Terminations are made
with compression-type, insulated
terminals. Control and communication
wiring is installed and accessed from the
front of the switchgear structure. Each
breaker compartment has a dedicated
horizontal and vertical wireway.
For devices not having screw-type
terminals, pressure terminals are used.
Circuit Breaker Compartments
Typical circuit breaker compartments
include primary disconnects, drawout
rails, secondary disconnects, vertical
wireway, horizontal wireway and, if
applicable, TOC switch operator, MOC
switch operator and associated interlocks. Drawout rails allow the breaker
to be withdrawn from the compartment
without additional extensions or adapters.
Up to six (2 sets of three) current
transformers for metering or relaying can
be mounted in each compartment.
Insulation
The insulation used is a UL recognized
thermoset material that has excellent heat
resistance, flame retardance, dimensional
stability and low moisture absorption.
A separate secondary disconnect access
door that is supplied with each breaker
can be used to mount a variety of auxiliary
devices such as breaker control switches,
indicating lights and pushbuttons.
Vertical bus ratings available are 1600,
2000, 3200, 4000 and 5000 amperes
continuous current. Horizontal bus
ratings available are 1600, 2000, 3200,
4000, 5000 and 6000 amperes. A neutral
bus is furnished when specified, and can
be rated 1600, 2000, 3200, 4000, 5000
or 6000 amperes continuous current.
2
1
3
4
A standard copper ground bus extends
through all sections. Cable lugs are
mounted to the ground bus in each
section.
Standard short-circuit withstand (4 cycle)
and short-time withstand (60 cycle) bus
bracing is 100,000 amperes. Higher shortcircuit withstand bus bracings (150kA and
200kA) are available.
Load side runbacks for feeder circuits
are copper construction, are insulated
with sleeve tubing in the main bus area,
and are supported by high-strength
bus bracing.
5
1
2
3
4
6
TOC Switch Operator
Breaker Compartment Rear Barrier
Secondary Disconnect
Vertical Wireway
7
5
6
7
Interference Interlock
Drawout Rails
Primary Disconnect
Circuit Breaker Cell Interior
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-44
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Options
without exposure to the elements.
An access door equipped with an
emergency bar release is located at
each end of the aisle.
The following features are standard
with walk-in outdoor enclosures.
(1) Space heaters in breaker compartment and bus compartment.
(2) Screens and filters for exterior
door ventilation louvers.
(3) Incandescent lighting receptacle
with three-way switch at each aisle
access door.
(4) Duplex receptacle with ground fault
protection at each aisle access door.
(5) Load center for power distribution
to lights, receptacles, switches and
heaters.
For non walk-in outdoor enclosures,
space heaters and screens/filters for
ventilation louvering are standard
with lighting, receptacles, switches
and load centers offered as options.
Side View
In the walk-in outdoor enclosure a
lighted, unobstructed service aisle is
provided at the front of the switchgear
allowing inspection and maintenance
Rear View
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-45
SWITCHGEAR
Test Set
A portable breaker test set is available as
an option and supports testing the full
range of functions and protective
settings supplied with the breaker trip
unit.
Metering and Auxiliary Compartments
Compartments are available to house
devices such as voltage transformers,
metering, control power transformers,
and supervisory devices.
Instrument and Control Transformers
Voltage transformers and control power
transformers are mounted in auxiliary
compartments. These transformers
are protected by primary pull-out type
current-limiting fuses and secondary
fuses. Current transformers are normally
mounted on the compartment primary
disconnect studs where they are readily
accessible.
Miscellaneous
▪ Each switchgear lineup includes a
breaker lifting device that is adjustable for use with Size II and Size III
breakers
▪ An optional portable breaker hoist is
available if the integrated breaker hoist
and track is not specified
▪ A test cabinet is also available as an
option. The test cabinet is wall mounted
necessary equipment for testing
electrically-operated breakers that
have been removed from the breaker
compartment. The test cabinet doesn't
include or replace a breaker trip unit
tester
▪ 4" high formed steel channel sills
are available for indoor switchgear
enclosures
Outdoor Switchgear
Type WL switchgear is available in two
outdoor (NEMA 3R) enclosures. Walk-in
and non walk-in versions are available
to meet your particular application.
For protection from snow, rain and
other foreign matter, both outdoor
enclosures rest on a six-inch high,
formed steel base which provides
rigid support and a tight bottom
seal. A heavy duty protective undercoating is applied to the underside
of all outdoor enclosures to protect
against moisture and corrosion.
Shielded ventilation housings permit
proper air circulation while excluding
dirt and foreign matter.
13
Siemens High Resistance Grounding
System
(1) The HRG section can be 22" or 32"
wide. The HRG instrument
compartment is 45" high and either
19" or 24" deep depending on
whether the circuit breakers are fused.
The HRG instrument compartment
will house all of the high resistance
grounding system components either
on the door or in the device bucket
except for the grounding resistors.
(2) The grounding resistor assembly will
mount in the rear cable compartment
of the switchgear on the runback
support posts. It will typically mount
behind the HRG instrument
compartment where it cannot
interfere with feeder breaker
runbacks.
(3) In a typical Siemens HRG application
with a close coupled main breaker
section, a general purpose instrument
compartment takes up the A
compartment, the main breaker goes
in the B compartment and the HRG
instrument compartment takes up the
C & D compartments. An alternate
HRG main breaker section can have
the HRG instrument compartment in
the A & B compartments, main
breaker in the C compartment and a
general instrument compartment in
the D compartment.
Switchgear Mounted Hoist
The integrally mounted hoist, standard
on walk-in outdoor and optional on
indoor switchgear enclosures, travels
along rails on top of the switchgear to
assist in breaker handling.
TOC and MOC Switches
The Truck Operated Cell (TOC) Switch
provides interlocking control or remote
indication of the breaker racking
position. The cubicle mounted auxiliary
switch or Mechanism Operated Cell
(MOC) switch provides interlocking
control or remote indication based on
the main contact position (open or
closed).
Shutters
These provide protection against accidental contact with primary disconnects
in a compartment when the breaker is
removed. Shutters automatically close
when the breaker is withdrawn and are
padlockable and field installable.
Key Interlock
This provides a mechanical means for
operating circuit breakers and other
devices only when predescribed conditions are met.
General
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Indoor Front Elevation View
Dimensions
Indoor Floor Plan and Cable Space Details
1.25
(32)
typ.
4.42 (112)
.75 (19) typ.
.86
(22)
1.50
(38)
.75 (19) typ.
5.86
(149) 7.88
(200)
.86
(22)
4.82
(122)
13
B
4.00
(102)
SWITCHGEAR
Transformer
Throat
Liquid filled &
outdoor dry type
transformers only
CL
A
Maximum available
space in top or bottom
of unit for customer's
power cables
1.00 End Trim Panel (typ.)
(25) Required on left and
right end of switchgear
lineup — adds 2”
to total lineup width
(4) Holes for
.50 (12mm)
Grade 5
anchor bolts
Space for
secondary
leads from
above
14.9
(378)
4.00
(102)
5.00
(127)
2.12
(54)
3.00 (76)
2.00 (51)
Space for
secondary
leads from
below
D
7.00
(179)
C
4.40 (112)
2.37 (60)
1.00 (25)
2.00 (51)
1.00 (25)
W
W = 22 (559) or 32 (813)
A
Equipment Depth
60" Non-Fused with
(N, S, H or L-Rating Breakers)
OR
65" Fused with (F-Rating Breakers)
70" Non-fused with
(N, S, H or L-Rating Breakers)
OR
75" Fused with (F-Rating Breakers)
Direction of Cables
B
C
D
Below
21.50 (546)
13.88 (353)
32.59 (828)
Above
21.25 (540)
18.88 (480)
37.59 (955)
Below
31.50 (800)
13.88 (353)
32.59 (828)
Above
31.25 (794)
18.88 (480)
37.59 (955)
Below
41.50 (1054)
41.25 (1048)
36.50 (927)
36.25 (921)
13.88 (353)
32.59 (828)
18.88 (480)
37.59 (955)
80" Non-fused with
(N, S, H or L-Rating Breakers)
Above
80" Fused with
(F-Rating Breakers)
Below
Above
Note: Dimensions shown in inches and (mm).
Reduce by 7.88" if upper neutral is present with cables above or if a lower neutral is present with cables below.
Reduce by 4.00" if an 800-3200A breaker is located in the bottom compartment.
Reductions per notes 1 & 2 are additive. Example: cables below + lower neutral + 2000A breaker in bottom compartment = B-11.88.
Reduce cable space by 4.00" x 4.82" if Neutral Riser is present. (Consult Factory).
4.10 (104) if W=22; 4.60 (117) if W=32.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-46
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Switchgear Depth Dimensional Information
(Dimensions below are for internal frames – not
total structure depth)
▪ Non-fused indoor – 60" standard, 70" and 80"
optional
▪ Fused indoor – 65" standard, 75" and 80"
optional
▪ Non-fused non-walk-in outdoor – 60" standard
and 75" optional
▪ Fused non-walk-in outdoor – 65" standard and
75" optional
▪ Non-fused walk-in outdoor – 60" standard and
75" optional
▪ Fused walk-in outdoor – 65" standard and 75"
optional
▪ Walk-in outdoor aisle is 42" deep
▪ Sections with cable connected main, tie and/or
feeder breakers that are 3200 amp or greater
must be minimum depth of 70" for unfused
breakers and 75" for fused breakers.
A
Compartment
B
Compartment
C
Compartment
D
Compartment
SWITCHGEAR
Note 1 – If a 4000 amp feeder breaker is installed
in Compartment C, Compartment D must be a
Blank or Instrument Compartment.
Note 2 – If a 4000 amp breaker is installed in
Compartment B, Compartment A must be a Blank
or Instrument Compartment.
Note 3 – Contact factory for application
guidelines related to this design.
Note 4 – If a 3200 amp breaker is installed in
Compartment B, the middle level through bus is
not available.
Note 5 – If a 3200 amp breaker is installed in
Compartment D, the lower level through bus is
not available.
Note 6 – If incoming is bottom, feeder breakers
can mount in compartments A and/or B.
Note 7 – If a 3200 amp breaker is installed in
Compartment B, Feeder Breaker in Compartment
A is limited to 1600 amp.
Note 8 – If a 3200 amp breaker is in
Compartment BC, the maximum breaker in
Compartment A is 1600 amp and if a 4000 amp
breaker is in Compartment BC, the maximum
breaker in Compartment A is 800 amp.
Section Compartment Arrangement
13
General Notes:
▪ A blank/instrument compartment can always be
substituted for a breaker compartment
▪ Any 22" wide section can be 32" wide if more
conduit working room is needed
▪ For bus duct connections – if incoming is top,
Compartment A must be blank/instrument, if
incoming is bottom, Com-partment D must be
blank/instrument
▪ Bused transition section is 22" wide
▪ For close coupled transformer connections,
Compartment A must be blank/instrument
▪ Utility metering is always in a separate
section. Section width is dependent on utility
Selection
Main Sections – Non-Fused Breakers
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600,
2000
Blank or
Instrument
Compartment
Blank or
Instrument
Compartment
Blank or
Instrument
Compartment
Main Breaker
800, 1600,
2000, 3200
Feeder Breaker
800, 1600,
2000, 3200
Blank or
Instrument
Compartment
Main Breaker
4000, 5000
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600,
2000, 3200
Main Breaker
800, 1600,
2000, 3200
Main Breaker
800, 1600,
2000, 3200
Feeder Breaker
800,1600, 2000,
3200, 4000
Main Breaker
4000, 5000
Feeder Breaker
800, 1600,
2000
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800,1600, 2000
22 in.
(559 mm)
22 in.
(559 mm)
22 in.
(559 mm)
32 in.
(813 mm)
Refer to Note 1
Refer to Note 1
Refer to Note 6
Feeder Breaker
800, 1600, 2000
32 in.
(813 mm)
Main Sections – Fused Breakers
Blank or
Instrument
Compartment
Blank or
Instrument
Compartment
Blank or
Instrument
Compartment
Main Breaker
800, 1600,
2000
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600,
2000
Main Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600, 2000
22 in.
(559 mm)
22 in.
(559 mm)
32 in.
(813 mm)
Blank or
Instrument
Compartment
Main Breaker
3200, 4000
Main Breaker
5000
32 in.
(813 mm)
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-47
Low Voltage Switchgear
Type WL Low Voltage Metal-Enclosed Switchgear
Selection
Tie Sections – Non-Fused Breakers
Feeder Breaker
800, 1600,
2000
13
Feeder Breaker
800,1600, 2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800,1600, 2000
Tie Breaker
800, 1600,
2000, 3200
Feeder Breaker
800, 1600,
2000
Tie Breaker
4000
Feeder Breaker
800, 1600, 2000,
3200, 4000
Feeder Breaker
800, 1600,
2000, 3200
Tie Breaker
800, 1600,
2000, 3200
Feeder Breaker
800,1600, 2000,
3200, 4000
Refer to Note 7
SWITCHGEAR
Tie Sections – Fused Breakers
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Tie Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Tie Breaker
4000, 5000
Feeder Breaker
800, 1600,
2000
Tie Breaker
800, 1600,
2000
Feeder Breaker
800,1600, 2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
32 in.
(813 mm)
22 in.
(559 mm)
22 in.
(559 mm)
32 in.
(813 mm)
Refer to Note 2
Refer to Note 2
and Note 4
Refer to Note 1
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800,1600, 2000
22 in.
(559 mm)
22 in.
(559 mm)
32 in.
(813 mm)
Refer to Note 1
Feeder Breaker
800, 1600,
2000
Main Breaker
800, 1600,
2000, 3200
Blank or
Instrument
Compartment
Feeder Breaker
800
Tie Breaker
800, 1600,
2000, 3200
Main Breaker
800, 1600,
2000
Tie Breaker
800, 1600,
2000, 3200
Main Breaker
800, 1600,
2000, 3200
Feeder Breaker
800, 1600,
2000
22 in.
(559 mm)
Tie Breaker
3200, 4000
Feeder Breaker
800
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Main Breaker
4000
Tie Breaker
4000
Main Breaker
800, 1600,
2000
Tie Breaker
800, 1600,
2000
Tie Breaker
800, 1600,
2000
Tie Breaker
4000
Main Breaker
4000
Tie Breaker
800, 1600,
2000
Main Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Main Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
22 in.
(559 mm)
22 in.
(559 mm)
32 in.
(813 mm)
32 in.
(813 mm)
22 in.
(559 mm)
22 in.
(559 mm)
Refer to Note 7
Feeder Sections – Non-Fused Breakers
Feeder Breaker
800, 1600,
2000
Blank or
Instrument
Compartment
Blank
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000, 3200
Feeder Breaker
800, 1600,
2000
Feeder Breaker
4000, 5000
Feeder Breaker
4000, 5000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000, 3200
Feeder Breaker
4000, 5000
Feeder Breaker
4000
Feeder Breaker
800, 1600,
2000, 3200
Feeder Breaker
800, 1600,
2000, 3200
Blank or
Instrument
Compartment
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600,
2000, 3200
32 in.
(813 mm)
32 in.
(813 mm)
32 in.
(813 mm)
Refer to Note 4
Refer to Note 5
Blank or
Instrument
Compartment
Tie Breaker
5000
32 in.
(813 mm)
Feeder Sections – Fused Breakers
Feeder Breaker
800, 1600,
2000
22 in.
(559 mm)
Refer to Note 8
Main and Tie Sections – Fused Breakers
Main and Tie Sections – Non-Fused Breakers
Blank or
Instrument
Compartment
Feeder Breaker
800, 1600
Refer to Note 5
Feeder Breaker
800, 1600
Blank or
Instrument
Compartment
Feeder Breaker
3200
Feeder Breaker
4000
Blank or
Instrument
Compartment
Feeder Breaker
5000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
Feeder Breaker
800, 1600,
2000
22 in.
(559 mm)
32 in.
(813 mm)
32 in.
(813 mm)
32 in.
(813 mm)
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-48
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Low Voltage Switchgear
Type WL Circuit Breakers
Rogowski Coil CT Technology
Electronic Trip Unit
Selection Criteria for WL Circuit
Breakers
The basic criteria for selecting circuit
breakers is:
Maximum Available Short Circuit at the
installation point. This value determines
the short circuit current interrupting
rating or short circuit current withstand
rating of the circuit breaker.
Rated Current In which is to flow
through the respective circuit breaker
continuously. This value may not be
greater than the maximum rated current
of the circuit breaker. The rated current
for the WL is determined by the rating
plug, up to the maximum frame rating.
Ambient Temperature of the circuit
breaker. This is usually the temperature
inside the cubicle.
Design of the circuit breaker.
Protective Functions of the circuit
breaker. These are determined by the
selection of the appropriate trip unit.
Dynamic Arc-Flash Sentry (Patent
Pending) A unique feature of the WL trip
unit allows the system designer to
achieve lower levels of arc flash energy
and delayed tripping for selective trip
coordination purposes.
Rating Plug
The Rating Plug is a replaceable module
that enables users to reduce the rated
device current for optimum adaptation to
the system; e.g., during startup of a plant
section. The Rating Plug should be
selected so that it corresponds to the
rated current of the system.
Switch-selectable I2t or I4t Characteristic
Curve Improved Overload Protection.
The best possible protection is assured
when all protective devices in the system
are optimally coordinated. To achieve
optimum selectivity and coordination, the
long-time characteristic can be switched
between l2t and l4t, to improve
coordination with fuses or inverse relays.
Switchable Parameter Sets
To allow the protection to adapt to
changes in system needs such as
switching between utility and generator
feeds, WL Circuit Breakers support ETUs
with two independent parameter sets.
Switching between the parameter sets
occurs in less than 100 ms and can be
done remotely or via a contact input to an
optional CubicleBUS module.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-49
SWITCHGEAR
Coil and Integrator:
The combination of a coil and an
integrator provides an exceptionally
versatile current-measuring system
which can be designed to accommodate
a vast range of frequencies, current
levels and conductor sizes. The output is
independent of frequency, has an
accurate phase response and can
measure complex current waveforms
and transients.
Linearity:
One of the most important properties of
a Rogowski coil measuring system is
that it is inherently linear. The coil
contains no saturable components and
the output increases linearly in
proportion to current right up to the
operating limit determined by voltage
breakdown. The integrator is also
inherently linear up to the point where
the electronics saturates. Linearity
makes Rogowski coils easy to calibrate
because a transducer can be calibrated
at any convenient current level and the
calibration will be accurate for all
currents including very large ones. Also,
because of their linearity, the
transducers have a very wide dynamic
range and an excellent transient
response.
Coil Winding
With a Rogowski coil it is important to
ensure that the winding is as uniform as
possible. A non-uniform winding makes
the coil susceptible to magnetic pickup
from adjacent conductors or other
sources of magnetic fields. We have
developed special machines for making
accurate windings. Coils come in a range
of styles including rigid and flexible coils
but we have developed several other
variations to meet specific needs.
Output Indication
The output from the integrator can be
used with any form of electronic
indicating device that has an input
impedance greater than about 10kohm
such as a voltmeter, oscilloscope,
transient recorder or protection system.
Split Coils
Some designs of coil can be fitted on
the conductor without the need to
disconnect the conductor. Most flexible
coils can be fitted this way and it is also
possible to build split rigid coils. Split
iron-cored devices such as current
transformers are subject to appreciable
amplitude and phase errors if the halves
are misaligned by even a small amount.
Rogowski coils do not have this
problem. Misalignment of the joining
faces of a split Rogowski coil has only a
small effect on the amplitude and no
effect on the phase.
13
A Rogowski coil is an ‘air-core’ toroidal
coil placed round the conductor. The
alternating magnetic field produced by
the current induces a voltage in the coil
which is proportional to the rate of
change of current.
The direct output from the coil is given
by Vout=M dI/dt Where M is the mutual
inductance of the coil and dI/dt is the
rate of change of current. To complete
the transducer the voltage is integrated
electronically so that the output from the
integrator is a voltage that accurately
reproduces the current waveform.
General
Low Voltage Switchgear
Type WL Circuit Breakers
Selection
SWITCHGEAR
13
Trip Unit Functions
Basic Protective Functions
Long-time overcurrent protection
Short-time delayed overcurrent protection
Instantaneous overcurrent protection
Neutral protection
Ground fault protection
L
S
I
N
G
ETU725
ETU727
ETU745
ETU748
ETU755
ETU776
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
--
쏹
쏹
---
쏹
쏹
쏹
쏹
쏹
쏹
-------
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
--
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
--
쏹
쏹
--
--------
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
---
---
쏹
쏹
쏹
쏹
--
--
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
쏹
--
--
-------
-------
-----
쏹
쏹
쏹
----
--
쏹
쏹
쏹
쏹
쏹
--
--
---
쏹
--
--
-----
-----
쏹
쏹
쏹
쏹
Additional Functions
Selectable neutral protection
Defeatable short-time delay
Defeatable instantaneous protection
Selectable thermal memory
Zone selective interlocking
Selectable I2t or fixed short-time delay
Adjustable instantaneous pick-up
Selectable I2t or I4t long-time delay
Adjustable short-time delay and pick-up
Selectable and adjustable neutral protection
Dual protective setting capability (DAS)*
Extended instantaneous protection
���
Parameterization and Displays
Parameterization by rotary switches (10 steps)
Parameterization by communication (absolute values)
Parameterization by menu/keypad (absolute values)
Remote parameterization of the basic functions
Remote parameterization of the additional functions
Alphanumeric LCD
Graphical LCD
Metering Function
Metering function Plus
--
Communication
CubicleBUS
Communication via PROFIBUS-DP
Communication via the MODBUS
Communication via the Ethernet (BDA)
standard
-- not available
optional
* DAS- Dynamic Arc Flash Sentry, Siemens patent pending protective feature
쏹
��� Fixed short-time delay only
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
13-50
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Low Voltage Switchgear
Type WL Circuit Breakers
General
WL Communication Overview
Connection Diagram
1 Breaker Data Adapter
13
13
(BDA)
WinPM.Net
Server
2 Browser-capable input
and output device
(e.g. notebook)
WinPM.Net
Web Client
Ethernet / Internet / Intranet
3 WL Circuit Breaker
4 COM 16 MODBUS
(BSS)
6 Electronic Trip Unit
MODBUS Master
PLC or Supervisory
Software
9510 Meter*
(Ethernet Gateway)
Optional
7 Metering function PLUS
8 Zone Selective
MODBUS
8
9
10
11
12
SWITCHGEAR
5 Breaker Status Sensor
13
Ethernet
module or COM 15
PROFIBUS module
15
BDA Plus*
14
Interlocking (ZSI) module
9 Digital output module
with relay or optocoupler
outputs
10 Digital output module
with relay or optocoupler
outputs, remotely
configurable
11 Analog output module
12 Digital input module
4
2
5
1
6
BDA
7
3
WL Circuit Breaker
with COM 16
* The Siemens BDA Plus or meters, 9330, 9350, 95/9610 can
be used as a gateway to enable Ethernet communication
to the WL Circuit Breaker.
13 WinPM.Net on PC
14 PLC (e.g. SIMATIC S7)
15 BDA Plus
Features
▪ Industry standard MODBUS or
PROFIBUS communication available on
all WL breakers from 200A to 5000A
▪ The high modularity of the WL Circuit
Breakers and accessories allows simple
retrofitting of all communication
components
▪ The ability to connect additional input
and output modules to the breakerinternal CubicleBUS of the WL opens up
a range of opportunities to reduce
econdary device count and wiring and
to increase functionality implemented
in switchgear
▪ Innovative software products for local
configuration, operation, monitoring
and diagnostics of WL Circuit Breakers
using MODBUS, PROFIBUS or via
Ethernet/Intranet/Internet
▪ Complete integration of WL Circuit
Breakers in all Totally Integrated Power
and Totally Integrated Automation
Solutions
Metering Function/Metering Function
PLUS
The integrated metering function can be
installed on all ETU745, ETU748,
ETU755, and ETU776 trip units and
provides a viable alternative to external
multi-function measuring instruments in
many applications.
Metering Function can measure the
following:
▪ Currents
▪ Voltages
▪ Power
▪ Energy
▪ Power Factor
▪ Frequency
All metered quantities are delivered as
real time values with min/max
recording. The metering module also
contains additional alarm setpoint and
protective relay functions (e.g. trip on
overfrequency or undervoltage, and
alarm on reverse power or over ampere
demand).
The Metering Function PLUS has two
additional wave form buffers and
supports harmonic analysis. With the
two independent wave form buffers, the
current and voltage waveforms can be
recorded, and allows detailed diagnostic
triggering on events.
If the Metering Function /Metering
Function PLUS is ordered together with
the circuit breaker, it is already installed
and ready for operation. As a retrofit
part, the metering function is simply
attached to the ETU and connected to
the CubicleBUS.
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-51
Low Voltage Switchgear
Arc Flash Solutions
General
Function Description
objects can be detected at a range of 15
m, for example, to output a warning
message (however, this is not safetyrelated).
Flexibility already on board
Mode of operation
E
Sc
Reflection
SF 3
SF 1
SF 4
SWITCHGEAR
13
SF 2
Dynamic Arc Flash Sentry (DAS)
Laser Scanner Sensor
SIGUARD laser scanners are optical
distance sensors which detect any
motion in a 190° working zone. By
transmitting safe laser pulses and then
evaluating every reflected pulse, they
have everything safely in view. And
when potentially hazardous situations do
arise, they respond quickly and reliably.
They can be simply programmed using
either a PC or a laptop which means that
they can be quickly and flexibly adapted
to new requirements.
Unified, integrated communications via
standard fieldbuses can be implemented
in a fail-safe fashion by transmitting
safety-related and standard data
together. This means that also with our
SIGUARD laser scanners, you can enjoy
the benefits of having just one bus
coupling.
SIGUARD laser scanners LS4 – the
advantages at a glance:
▪ Hazardous areas can be contactlessly
and reliably secured with devices
which can be universally used: on
machines, production robots, conveyor
systems, vehicles etc.
▪ Standard versions with fail-safe
semiconductor outputs
▪ Safe direct connection to AS-Interface
Safety at Work
▪ User-friendly version with PROFIBUS
PROFIsafe connection
▪ When scanners are replaced,
parameters are automatically
transferred via PROFIBUS
▪ Category 3 according to EN 954-1
▪ Up to 4 personnel protective and warning
field pairs which can be freely set
▪ Protective field with max. 4 m radius
for personnel safety
▪ Extremely compact design
▪ Low current drain (approx. 300 mA)
13-52
The SIGUARD laser scanner LS4 is a
scanner which optically and
contactlessly scans areas – and which is
predominantly used for personnel
protection. The laser scanner generates
a continuous train of bundled light
pulses using a laser diode and an optical
system. An integrated rotating mirror
distributes these light pulses over the
complete working area. If objects or
persons enter this field, then the
scanner evaluates the reflected light
pulses and, using the light propagation
time, continually calculates the precise
position coordinates. If the defined
personnel protective field is violated,
then it brings the machine to an
immediate stop.
0.36°
– 5°
SIGUARD laser scanners can be flexibly
adapted to every requirement using four
variable protective field pairs for
personnel protection and warning fields.
These protective field pairs can be
simply set at the PC. The SIGUARD
laser scanner can be used on stationary
machines and systems, but it can also
be used for mobile applications mounted
on vehicles, driverless transport systems
or trolleys. This means, for example, that
various operating areas of a robot can be
secured where the laser scanner
consecutively scans the different areas.
Using four programmable protective
fields, driverless transport systems can
be secured e.g., for fast travel, slow
travel, lefthand and righthand curves.
Software for every application
185°
The operating range of SIGUARD laser
scanners LS4 extends over 190° and is
subdivided into angular segments of
0.36°. The scanning rate is 25 scans per
second which means that a light pulse is
transmitted every 40 ms into every
segment. A special algorithm ensures
that objects larger than 70 mm – this
corresponds to the scanner resolution –
are reliably detected. However, it also
ensures that dust and other disturbing
effects do not have a negative impact on
the availability of the system.
Personnel protective field 4 m
Warning field
Working area
Only personnel protective fields are shown
15 m
50 m
SIGUARD laser scanners LS4 detect
persons – even when they are wearing
dark clothing – in a safety-related fashion
up to 4 meters away. Persons and
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
It is extremely easy to precisely set the
laser scanner thanks to the LS4soft PC
operator software. The following
functions are integrated:
▪ Protective fields can be easily
configured using either a PC or laptop
▪ Additional functions such as protective
field changeover, restart inhibit etc.
can be configured using a software
assistant
▪ Extensive range of displays – e.g.,
defined protective fields, actual scan
contour, system settings etc.
▪ Safe access protection using
passwords with various authorization
stages
▪ LS4soft can run under Microsoft
Windows 95/98/2000/NT/XP
Low Voltage Switchgear
Arc Flash Solutions
General
Connection Examples
+ 24V
0V
PE
AS-Interface Safety at Work
1,25
A mT
24 V
AS-Interface
auxiliary voltage
or 24 V DC
Evaluation unit or
fault-tolerant PLC
Optional: Local
button for restart
Protective field 1–4
Addressing socket
1 2 3 4 5 6 7 8 9 10 1112 13 14 15
13
X1
SWITCHGEAR
SIGUARD laser scanner LS4
SIGUARD laser scanner LS4
SIGUARD laser scanner “Standard” with protective field
changeover and start button
▪ Start button for manual restart directly at the scanner
(connection 2)
▪ Alarm output at connection 5 (e.g., warning lamp)
▪ Protective field changeover at connections 4, 6, 7 and 8
▪ Safety-related processing of the safe outputs (connections 11
and 12) through an evaluation unit or fault-tolerant PLC
PROFIBUS
PROFIBUS
or terminating resistor at the end node
24 V DC
+24V
+ 24V
0V
PE
SIGUARD laser scanner AS-Interface
▪ Directly connected to AS-Interface Safety at Work
▪ Safety-related shutdown using the safety monitor
▪ Protective field changeover as for the standard scanner
▪ A local button can be optionally connected for manual restart
▪ All of the connections are established through M12
connectors
6,3 AF
1,25
AmT
k4
Safety output
Optional: Local
button for restart
6,3 AF
1 AT
Contactor
monitoring
k5
A1(L+)
S1
1
S33 S34 S35 S31 S22
2
3
1 2 3 4 5 6 7 8 9 10 1112 13 14 15
CH1
K1
SIGUARD 3RG7847-4BB
K2
A2(L-
S21 S12
1
K4*
SIGUARD laser scanner LS4
SIGUARD Laserscanner LS4
N.O.
N.O.
CH2
2
3
K5*
0V
*provide suitable
spark quenching
SIGUARD laser scanner “Standard” with 3RG7847-4BB
evaluation unit
▪ Start button for manual restart directly at the scanner
(connection 2)
▪ Permanently set protective field pair 1 (24 V permanently
connected to connection 4)
SIGUARD laser scanner PROFIBUS
▪ Directly connected to PROFIBUS
▪ The shutdown signal is safely transferred via the PROFIBUS
PROFIsafe profile
▪ Safe protective field changeover also via PROFIBUS
▪ Laser scanners can be quickly replaced thanks to the
automatic parameter transfer
▪ A local button can be optionally connected for manual restart
▪ All of the connections are established through M12
connectors
For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
13-53
SWITCHGEAR
13
Notes
13-54
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14SPEEDFAX
TM
2007-2008 Busway Systems
Contents
14-4
14-5 – 14-7
14-8 – 14-10
14-11 – 14-12
14-13
14-14
14-15 – 14-16
14-17
14-18
14-19 – 14-20
14-21 – 14-22
14-23
14-24 – 14-25
14-26 – 14-27
14-28 – 14-29
14-30 – 14-31
14-32
14-33
14-34
14-35
14-36
14-37
14-38 – 14-39
14-40
14-41
14-42 – 14-43
14-44
14-45
14-46
14-47
14-48
14-49
14-50
14-51
14-52
14-53
14-54
14-55
14-56
14-57 – 14-58
14-59
14-60 – 14-61
14-62
BUSWAY
SYSTEMS
Residential Commercial Industrial
14-2
14-3
14
General Pricing Notes
Busway Selector
Sentron® Busway
Catalog Numbering System
Busway, Aluminum
Busway, Copper
Busway, Accessories
Sentron® Bus Plugs
Catalog Numbering System
Fusible Bus Plugs
Circuit Breakers
Sentron® Miscellaneous
Sentron® Cubicles
Meter Center Taps
Sentron® General & Technical Information
National Electric Code—References
Sentron Busway Overview
Sentron Bus Plug Overview
Technical Data
Straight Sections - Plug-In, Riser & Feeder
Elbows
Offsets & Combinations
Tees
End Tap Boxes
Center Tap Boxes
In-Line Disconnect Cubicles & Expansion Fittings
Reducers & Phase Rotation Fittings
Service Heads
Hangers
Hangers & End Closers
Roof & Wall Flanges
Flanged Ends
Panelboards & Meter Center Modules
Molded Case Circuit Breaker Cubicles with Meter Tap Stack Provisions
Installation & Application Information
Sentron Busway Quick Reference
XJ-L, Plug-in
Busway, Copper
Busway, Accessories
BD, Plug-in
Busway, Aluminum and Copper
Busway, Accessories
XL-U, Plug-In, Feeder
Busway, Aluminum
Busway, Accessories
Busway, Copper
Busway, Accessories
Bus Plugs
XJ-L
XL-X, XL-U, BD
Cubicles
XL-X, XL-U, BD
Mobile Industrial Trol-E Duct
2 and 3-Pole Duct, Accessories
4-Pole Duct, Accessories
Busway Systems Overview
BUSWAY
SYSTEMS
14
Pricing Notes
A. Footage Pricing
1. Sentron and XL-U base pricing is
listed on a per foot charge. When
calculating the footage charge,
fractions are figured to the next
larger number of whole feet (i.e.,
a linear run totaling 66'3" would
be priced at 67 feet.
2. BD, XJ-L and ITD base pricing is
listed on a per section charge.
B. Accessories
Some busway accessories are
listed as complete device prices
while others are listed under
accessory charges.
1. Complete device price includes all
material and accessory charges
for a standard device. (Busway
footage included if applicable).
2. Accessory Charge includes
fabrication and any miscellaneous
fittings for the standard device.
(No busway footage included).
C. End Cable Tap Boxes are designed
to be installed at the beginning or
end of a busway run. The busway
rating determines the tap box list
price. Mechanical lugs are standard.
For compression lugs add 30% to
tap box list price.
D. Elbows with an angle other than 90
degrees, the accessory charge is to
be doubled.
E. Flange Ends (Switchboard
Connections / Stubs) accessory
prices are for connection to Siemens
equipment. For connection to other
manufacturer’s equipment, multiply
the flange end list price by 2.5.
Standard list price includes eight
inches of bus extension into
equipment from mounting flange,
if more than 8 inches required
consult factory for pricing. Sentron
Switchboards can be assembled
with the Busway Flanged End
pre-installed, eliminating the labor
to connect the Busway to the
switchboard at the job site.
F. Service Heads are specially
constructed tap boxes suitable for
outdoor use and are equipped to
accept service cables through a
removable insulated bottom plate.
The busway should be priced
through the end of the run.
14-2
General
G. Phase Transpositions can be built
into a busway section to provide
better voltage balance on long runs.
To price, use the “Expansion Section”
accessory charge for the appropriate
ampere rating.
H. Hangers
Sentron and XL-U busway are UL
listed for standard hanger spacing
of ten feet (on center). Purchasing
busway hangers for horizontal
installations is optional. Unistrut/
Kindorf is commonly used by
contractors as an approved
alternative.
Two hangers are furnished free of
charge with every straight section of
BD and XJ-L. For ITD refer to pricing
section. Self compensating “Spring”
hangers required for vertical
installations are designed to be field
installed by the installer and are
shipped separately. These are also
used as intermediate supports where
floor-to-floor height is greater than 16
feet.
I. Ceiling, Floor And Wall Flanges are
used when busway passes through a
floor or wall and are intended to
cover that portion of the opening
around the outside of the busway.
They are not to be used to
support the busway.
J. Reducers price is determined by the
rating of the larger busway. Fused
reducers do not include fuses.
K. Special Paint — Busway Sections,
Accessories And Bus Plugs
Standard finish is ASA #61 light gray.
For other than standard color, add
20% and consult factory for
availability.
L. For Silver Finishing of Copper Bus
Bars, add 10%.
M. Roof Flanges are specially constructed
collars and plates built onto a section of
3R busway which passes through a flat
or angled roof. Roof pitch must be
given for angled roof.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
N. Circuit Breaker Type Bus Plugs
for Sentron Busways are priced as
“complete devices” with circuit
breakers factory installed.
Circuit Breaker plugs for XJ-L, BD,
XL-U and XL-X busways are priced
“enclosure only.” When ordered
with breaker, standard procedure
is to individually ship both the
enclosure and circuit breaker.
When ordering bus plugs with
breaker factory installed, add
enclosure and breaker prices
together and add 20% to the total,
specify when ordering and allow
time for assembly.
O. Fusible Type Bus Plugs do not
include fuses. Adapter kits for Class
R, T & J fuses are available for field
installation.
P. Cubicle list prices include labor and
material for a single frame device
with enclosure including line side
internal bussing for connection to
busway and protective device.
Fuses and load side bussing are
not included in the base price.
Q. Sentron Busway has been tested in
accordance with UL1479 and offers
a certified two hour fire rating for
gypsum wall board construction,
and a three hour fire rating for
concrete slab or block penetrations.
These ratings were achieved using
standard busway installed with
SpecSeal® sealant from
Specified Technologies Inc.
This material is available through
Electrical Distribution.
R. Refer to the following publications
for additional technical information
and physical parameters.
Sentron Busway
BUSA-05501
XL-U Busway
5.3.2
BD Busway
BUSA-5331
XJ-L Busway
BUPC-XJL-01
TROL-E-DUCT
5.2.1
Busway Systems Overview
Selector Chart (100-6500 Ampere)
I-T-E (then known as Bulldog Electric)
was the first manufacturer to make a
Busway System. Since its introduction in
General
1932, Busway Systems have improved
and expanded into several designs to
meet the ever changing needs of the
electrical industry. The Busway Selection
Chart below will help you in selecting the
proper product to fit your requirements.
Busway Selector Chart
100-6500 Ampere
Feature
Ampere
Rating
AC Service
50-60 Hz
400Hz
Voltage
Construction
Meets
Electrical
Standard
Meets
most applicable provisions of this foreign
standard.
BD
Plug-in
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Consult
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
Industrial
Trol-E-Duct
⻫
⻫
⻫
BUSWAY
SYSTEMS
Use
100
150
200
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
5000
6000, 6500
Copper
Aluminum
Indoor
Outdoor
2W
1Ø3W
3Ø3W
3Ø4W FN
3Ø4W 200% N
600 volts or less
Ventilated
Non-Ventilated
UL
857
NEMA
BU1
CSA/CUL C22.2 NO 27
ANCE
NMX-J-148ANCE
60439-1 1993
IEC
60439-2 1993
XJ-L
Plug-in
14
Conductor
600 Volts or Less
Product
Plug-in and Feeder Busway
Sentron
XL-U
Plug-in/Feeder
Plug-in Feeder
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
⻫
factory for information.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-3
Sentron® Busway Systems
Catalog Numbering System
Selection
Suffix part of Catalog Numbers
S X
4
0 2
C
1
0
䊱
䊱
䊱
䊱
䊱
䊱
Sentron
SX = US Lengths
BUSWAY
SYSTEMS
14
Configuration
3 = 3Ø, 3W
4 = 3Ø, 4W 100% Neutral
5 = 3Ø, 4W 200% Neutral
Ampere Rating
02 = 225A
04 = 400A
06 = 600A
08 = 800A
10 = 1000A
12 = 1200A
13 = 1350A
16 = 1600A
20 = 2000A
25 = 2500A
30 = 3000A
P
L
0
6
䊱
䊱
䊱
䊱
Feeder
Length in Inches, ex.: 2'3" = 027
Feeder lengths available from 2'0"
(024 Inches) up to 10'0" (120 inches)
Plug-in
L
Length
04 = 4'0"
06 = 6'0"
08 = 8'0"
10 = 10'0"
Riser
I
Length
04 = 4'0"
06 = 6'0"
08 = 8'0"
10 = 10'0"
Elbows
S = Stack햹
L = 90°
O = Odd
degree angle햶
32 = 3200A
40 = 4000A
50 = 5000A햲
Bus Bar Material
C = Copper
M = 1000 Amps/In2 Copper
A = Aluminum
L = 750 Amps/In2 Aluminum
Ground
1 = Integral (Housing)
2 = Internal Bus Bar 햳
3 = Isolated Ground 햳
Tees
Offsets
Combinations
E
F
O
Edge
Up
Down
Flat
Right
Left
Edge
Up
Down
Flat
Right
Left
Edge
Up
Down
Flat
Right
Left
Edge Up
Edge Down
Edge Up
Edge Down
Flat Left
Flat Left
Flat Right
Flat Right
Flat Left
Flat Left
Flat Right
Flat Right
Edge Up
Edge Down
Edge Up
Edge Down
IP Rating
0 = IP40햷
4 = IP55햷
6 = IP66햴햸햹
9 = NEMA 3R햵햸햹
EXpansion
Fittings
P
F
T
Center Cable
Tap Boxes
T
B
햲 Copper
Standard
EXpanded
End Cable
Tap Boxes
T
Vertical
Horizontal
Standard
EXpanded
End Closers
C
L
S
FlanGe
Roof
Wall
F
L
Joint Stacks
Standard
Isolation
S
T
SerVice Heads
1 = 1-Phase
3 = 3-Phase
T = Throat
Tranformer
Reducers
Fused
Non-fused
R
R
F
N
Flanged End
E = Int’l Standard N
R = U.S. Standard N
O = Other
D
D
Transposition
R
only
햳 Copper or aluminum ground bar
햴 IEC Markets
햵 NEMA Markets
햶 For odd degree angle (other than 90°) specify the degree angle of the turn.
햷 Indoor only (Plug-in and Feeder)
햸 Outdoor use (Feeder only)
햹 Elbow Stack (IP40 and IP55 only)
• Catalog Numbers for Hangers can be found on page 14-12.
• Specials must be ordered by description (drawing must be included). Contact factory
for pricing.
14-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Utility
H
Florida Pwr/Light
Houston Pwr/Light
Commonwealth ED
Pacific Gas/Electric
Detroit Edison
Other
PG = Phase & Ground
PO = Phase only
GO = Ground only
Sentron® Straight Section Busway
Aluminum (225 – 1000 Ampere)
Selection
225A Aluminum
Basic Catalog Number
SX302A1
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX302A2
SX302A3
SX402A1
SX502A1
SX402A2
4-Pole
Internal
Ground
SX502A2
4-Pole
Internal
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
249.00
264.00
293.00
308.00
374.00
393.00
268.00
282.00
318.00
335.00
259.00
273.00
259.00
321.00
3-Pole
Isolated
Ground
4-Pole
4-Pole
200%
Neutral
274.00
322.00
411.00
293.00
348.00
284.00
336.00
276.00
326.00
415.00
295.00
349.00
285.00
337.00
SX304A1
249.00
293.00
374.00
268.00
318.00
259.00
305.00
SX304A2
264.00
308.00
393.00
282.00
335.00
273.00
321.00
SX304A3
274.00
322.00
411.00
293.00
348.00
284.00
336.00
SX306A1
249.00
293.00
374.00
268.00
318.00
259.00
305.00
SX306A2
264.00
308.00
393.00
282.00
335.00
273.00
321.00
SX308A1
271.00
321.00
409.00
290.00
343.00
280.00
332.00
SX310A1
295.00
346.00
441.00
311.00
370.00
302.00
358.00
SX402A3
4-Pole
Isolated
Ground
SX502A3
4-Pole
Isolated
Ground
200%
Neutral
349.00
410.00
524.00
370.00
436.00
360.00
424.00
312.00
367.00
471.00
332.00
372.00
322.00
360.00
386.00
455.00
580.00
405.00
481.00
397.00
470.00
367.00
390.00
497.00
349.00
417.00
341.00
403.00
405.00
479.00
608.00
421.00
504.00
415.00
491.00
SX404A1
276.00
326.00
415.00
295.00
349.00
285.00
337.00
SX504A1
349.00
410.00
524.00
370.00
436.00
360.00
424.00
SX404A2
312.00
367.00
471.00
332.00
393.00
322.00
380.00
SX504A2
386.00
455.00
580.00
405.00
481.00
397.00
470.00
SX404A3
332.00
390.00
342.00
349.00
391.00
341.00
403.00
SX504A3
405.00
479.00
608.00
424.00
504.00
415.00
491.00
SX306A3
274.00
322.00
411.00
293.00
348.00
284.00
336.00
SX406A1
276.00
326.00
415.00
295.00
349.00
285.00
337.00
SX506A1
349.00
410.00
524.00
370.00
436.00
360.00
424.00
SX406A2
312.00
367.00
471.00
332.00
393.00
322.00
380.00
SX506A2
386.00
455.00
580.00
405.00
481.00
397.00
470.00
SX406A3
332.00
390.00
497.00
349.00
417.00
341.00
403.00
SX506A3
405.00
479.00
608.00
424.00
504.00
415.00
491.00
SX308A2
282.00
332.00
424.00
298.00
357.00
291.00
343.00
SX308A3
293.00
343.00
440.00
310.00
368.00
301.00
357.00
SX408A1
295.00
346.00
441.00
311.00
370.00
302.00
358.00
SX508A1
373.00
439.00
559.00
390.00
462.00
383.00
451.00
SX408A2
333.00
391.00
500.00
352.00
417.00
342.00
404.00
SX508A2
410.00
484.00
617.00
429.00
510.00
420.00
497.00
SX408A3
353.00
417.00
529.00
370.00
415.00
360.00
429.00
SX508A3
431.00
510.00
646.00
449.00
533.00
440.00
521.00
SX310A2
315.00
370.00
471.00
332.00
393.00
324.00
383.00
SX310A3
333.00
393.00
502.00
352.00
418.00
342.00
405.00
SX410A1
336.00
395.00
503.00
353.00
420.00
343.00
408.00
SX510A1
424.00
500.00
636.00
441.00
524.00
433.00
512.00
SX410A2
379.00
448.00
572.00
398.00
471.00
389.00
459.00
SX510A2
467.00
552.00
702.00
484.00
575.00
477.00
564.00
SX410A3
403.00
472.00
604.00
420.00
497.00
410.00
484.00
SX510A3
490.00
579.00
735.00
508.00
604.00
498.00
591.00
400A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
800A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
1000A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
IP40
IP55
Feeder Only
Outdoor
Discount Schedule BUSW
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-5
BUSWAY
SYSTEMS
600A Aluminum
14
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Sentron® Straight Section Busway
Aluminum (1200– 2000 Ampere)
Selection
1200A Aluminum
Basic Catalog Number
SX312A1
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX312A2
SX312A3
SX412A1
SX512A1
SX412A2
4-Pole
Internal
Ground
SX512A2
4-Pole
Internal
Ground
200%
Neutral
4-Pole
4-Pole
200%
Neutral
SX412A3
4-Pole
Isolated
Ground
SX512A3
4-Pole
Isolated
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
333.00
395.00
391.00
466.00
502.00
595.00
352.00
414.00
417.00
490.00
342.00
404.00
404.00
479.00
3-Pole
Isolated
Ground
456.00
541.00
687.00
473.00
564.00
466.00
552.00
459.00
542.00
689.00
477.00
565.00
467.00
554.00
579.00
684.00
865.00
596.00
708.00
587.00
697.00
518.00
611.00
772.00
535.00
636.00
528.00
624.00
637.00
753.00
957.00
655.00
772.00
646.00
766.00
548.00
648.00
819.00
565.00
672.00
556.00
659.00
SX313A1
398.00
467.00
596.00
415.00
492.00
405.00
480.00
SX313A2
398.00
467.00
596.00
415.00
492.00
405.00
480.00
SX313A3
518.00
614.00
788.00
535.00
637.00
528.00
625.00
SX413A1
521.00
615.00
788.00
539.00
639.00
529.00
627.00
SX513A1
656.00
772.00
988.00
673.00
803.00
666.00
788.00
SX413A2
587.00
696.00
881.00
605.00
718.00
596.00
706.00
SX513A2
722.00
850.00
1081.00
741.00
881.00
731.00
865.00
SX413A3
622.00
735.00
927.00
639.00
760.00
748.00
748.00
SX513A3
758.00
896.00
1129.00
772.00
912.00
763.00
912.00
SX316A1
466.00
549.00
699.00
483.00
574.00
473.00
562.00
SX316A2
534.00
629.00
803.00
552.00
655.00
543.00
642.00
SX316A3
603.00
711.00
896.00
618.00
735.00
610.00
722.00
SX416A1
604.00
714.00
912.00
621.00
737.00
611.00
727.00
SX516A1
760.00
896.00
1143.00
772.00
927.00
768.00
912.00
SX416A2
680.00
803.00
1019.00
698.00
834.00
689.00
819.00
SX516A2
834.00
988.00
1253.00
850.00
1019.00
850.00
1005.00
SX416A3
719.00
850.00
1081.00
737.00
881.00
729.00
865.00
SX516A3
881.00
1036.00
1314.00
896.00
1067.00
881.00
1050.00
SX320A1
570.00
672.00
850.00
586.00
697.00
577.00
684.00
SX320A2
637.00
753.00
957.00
655.00
772.00
646.00
766.00
SX320A3
706.00
834.00
1067.00
722.00
865.00
715.00
850.00
SX420A1
708.00
834.00
1067.00
727.00
865.00
717.00
850.00
SX520A1
896.00
1050.00
1329.00
912.00
1081.00
896.00
1067.00
SX420A2
803.00
943.00
1205.00
819.00
974.00
803.00
957.00
SX520A2
974.00
1160.00
1469.00
1005.00
1191.00
988.00
1174.00
SX420A3
974.00
1160.00
1469.00
1005.00
1191.00
988.00
1174.00
SX520A3
1019.00
1222.00
1545.00
1036.00
1236.00
1036.00
1222.00
668.00
788.00
1005.00
686.00
819.00
677.00
803.00
BUSWAY
SYSTEMS
14
1350A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
1600A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
2000A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
14-6
IP40
IP55
Feeder Only
Outdoor
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Sentron® Straight Section Busway
Aluminum (2500 – 4000 Ampere)
Selection
2500A Aluminum
Basic Catalog Number
SX325A1
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX325A2
SX325A3
SX425A1
SX525A1
SX425A2
4-Pole
Internal
Ground
SX525A2
4-Pole
Internal
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
749.00
834.00
881.00
988.00
1129.00
1253.00
766.00
850.00
865.00
1005.00
759.00
834.00
896.00
988.00
3-Pole
Isolated
Ground
4-Pole
4-Pole
200%
Neutral
912.00
1081.00
1376.00
927.00
1112.00
927.00
1098.00
912.00
1081.00
1376.00
927.00
1112.00
927.00
1098.00
SX330A1
896.00
1050.00
1345.00
912.00
1081.00
896.00
1067.00
SX330A2
957.00
1143.00
1452.00
988.00
1160.00
974.00
1160.00
SX330A3
1036.00
1222.00
1562.00
1050.00
1253.00
1050.00
1236.00
SX332A1
973.00
1143.00
1452.00
988.00
1174.00
973.00
1159.00
SX332A2
1081.00
1282.00
1623.00
1097.00
1298.00
1081.00
1298.00
SX340A1
1112.00
1329.00
1686.00
1129.00
1345.00
1129.00
1329.00
SX340A2
1314.00
1545.00
1963.00
1329.00
1576.00
1314.00
1562.00
SX425A3
4-Pole
Isolated
Ground
SX525A3
4-Pole
Isolated
Ground
200%
Neutral
1143.00
1360.00
1731.00
1160.00
1391.00
1160.00
1376.00
1036.00
1222.00
1545.00
1050.00
1253.00
1036.00
1236.00
1267.00
1500.00
1901.00
1284.00
1531.00
1267.00
1514.00
1098.00
1298.00
1638.00
1112.00
1314.00
1098.00
1298.00
1329.00
1562.00
1994.00
1345.00
1593.00
1329.00
1576.00
SX430A1
1036.00
1236.00
1562.00
1050.00
1253.00
1050.00
1236.00
SX530A1
1298.00
1545.00
1963.00
1314.00
1562.00
1314.00
1562.00
SX430A2
1174.00
1391.00
1762.00
1191.00
1407.00
1174.00
1407.00
SX530A2
1438.00
1700.00
2149.00
1452.00
1731.00
1438.00
1717.00
SX430A3
1236.00
1469.00
1855.00
1253.00
1483.00
1253.00
1483.00
SX530A3
1500.00
1777.00
2257.00
1514.00
1808.00
1514.00
1793.00
SX332A3
1310.00
1407.00
1793.00
1206.00
1438.00
1206.00
1423.00
SX432A1
1310.00
1423.00
1793.00
1206.00
1438.00
1206.00
1423.00
SX532A1
1654.00
1948.00
2458.00
1500.00
1793.00
1500.00
1793.00
SX432A2
1485.00
2374.00
2243.00
1361.00
1607.00
1345.00
1593.00
SX532A2
1422.00
1685.00
2133.00
1669.00
1978.00
1700.00
1963.00
SX432A3
1345.00
1593.00
2026.00
1437.00
1700.00
1437.00
1700.00
SX532A3
1715.00
2040.00
2582.00
1731.00
2071.00
1731.00
2056.00
SX340A3
1500.00
1777.00
2241.00
1514.00
1793.00
1500.00
1777.00
SX440A1
1500.00
1777.00
2241.00
1514.00
1793.00
1500.00
1777.00
SX540A1
1870.00
2226.00
2814.00
1886.00
2241.00
1886.00
2241.00
SX440A2
1686.00
1994.00
2535.00
1700.00
2025.00
1700.00
2009.00
SX540A2
2071.00
2443.00
3092.00
2087.00
2474.00
2071.00
2458.00
SX440A3
1777.00
2102.00
2675.00
1793.00
2133.00
1793.00
2118.00
SX540A3
2164.00
2566.00
3232.00
2180.00
2582.00
2164.00
2566.00
3000A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
4000A Aluminum
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
IP40
IP55
Feeder Only
Outdoor
Discount Schedule BUSW
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-7
BUSWAY
SYSTEMS
3200A Aluminum
14
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Sentron® Straight Section Busway
Copper (225 – 1000 Ampere)
Selection
225A Copper
Basic Catalog Number
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX302C1
SX302C2
SX302C3
SX402C1
SX502C1
SX402C2
SX502C2
4-Pole
Internal
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
380.00
430.00
446.00
503.00
571.00
642.00
401.00
452.00
476.00
533.00
390.00
441.00
461.00
520.00
3-Pole
Isolated
Ground
4-Pole
4-Pole
200%
Neutral
4-Pole
Internal
Ground
478.00
561.00
717.00
499.00
591.00
489.00
578.00
479.00
565.00
719.00
500.00
592.00
490.00
579.00
606.00
714.00
906.00
627.00
741.00
616.00
728.00
542.00
639.00
812.00
561.00
668.00
550.00
652.00
SX304C1
380.00
446.00
571.00
401.00
476.00
390.00
461.00
SX304C2
430.00
503.00
642.00
452.00
533.00
441.00
520.00
SX304C3
478.00
561.00
717.00
499.00
591.00
489.00
578.00
SX404C1
479.00
565.00
719.00
500.00
592.00
500.00
579.00
SX504C1
606.00
714.00
906.00
627.00
741.00
616.00
728.00
SX404C2
542.00
639.00
812.00
561.00
668.00
550.00
652.00
SX504C2
668.00
787.00
1009.00
687.00
817.00
679.00
800.00
SX404C3
572.00
675.00
854.00
592.00
705.00
583.00
691.00
SX504C3
698.00
824.00
1043.00
719.00
854.00
709.00
840.00
SX306C1
380.00
446.00
571.00
401.00
476.00
390.00
461.00
SX306C2
430.00
503.00
642.00
452.00
533.00
441.00
520.00
SX306C3
478.00
561.00
717.00
499.00
591.00
489.00
578.00
SX406C1
479.00
565.00
719.00
500.00
592.00
490.00
579.00
SX506C1
606.00
714.00
906.00
627.00
741.00
616.00
728.00
SX406C2
542.00
639.00
812.00
561.00
668.00
550.00
652.00
SX506C2
668.00
787.00
1009.00
687.00
817.00
679.00
800.00
SX406C3
572.00
675.00
854.00
592.00
705.00
583.00
691.00
SX506C3
698.00
824.00
1043.00
719.00
854.00
709.00
840.00
SX308C1
417.00
490.00
625.00
435.00
517.00
428.00
503.00
SX308C2
476.00
556.00
709.00
493.00
584.00
483.00
571.00
SX308C3
530.00
624.00
794.00
548.00
650.00
537.00
637.00
SX408C1
531.00
625.00
797.00
549.00
652.00
539.00
639.00
SX508C1
669.00
788.00
1009.00
687.00
816.00
679.00
804.00
SX408C2
600.00
708.00
906.00
618.00
735.00
608.00
721.00
SX508C2
738.00
872.00
1112.00
740.00
906.00
747.00
888.00
SX408C3
634.00
749.00
957.00
652.00
775.00
642.00
762.00
SX508C3
773.00
906.00
1162.00
791.00
941.00
781.00
923.00
SX310C1
461.00
542.00
692.00
479.00
568.00
470.00
555.00
SX310C2
565.00
667.00
846.00
583.00
692.00
572.00
679.00
SX310C3
667.00
787.00
991.00
685.00
812.00
674.00
799.00
SX410C1
668.00
788.00
1009.00
686.00
816.00
675.00
804.00
SX510C1
841.00
991.00
1264.00
854.00
1025.00
850.00
1009.00
SX410C2
753.00
888.00
1128.00
773.00
923.00
762.00
906.00
SX510C2
923.00
1094.00
1386.00
941.00
1128.00
941.00
1112.00
SX410C3
797.00
941.00
1197.00
816.00
975.00
806.00
957.00
SX510C3
975.00
1145.00
1454.00
991.00
1180.00
975.00
1162.00
668.00
787.00
1009.00
687.00
817.00
679.00
800.00
SX402C3
4-Pole
Isolated
Ground
572.00
675.00
854.00
592.00
705.00
583.00
691.00
SX502C3
4-Pole
Isolated
Ground
200%
Neutral
698.00
824.00
1043.00
719.00
854.00
709.00
840.00
BUSWAY
SYSTEMS
14
400A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
600A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
800A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
1000A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
14-8
IP40
IP55
Feeder Only
Outdoor
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Sentron® Straight Section Busway
Copper (1200 – 2500 Ampere)
Selection
1200A Copper
Basic Catalog Number
SX312C1
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX312C2
SX312C3
SX412C1
SX512C1
SX412C2
4-Pole
Internal
Ground
SX512C2
4-Pole
Internal
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
598.00
703.00
704.00
829.00
906.00
1043.00
616.00
721.00
731.00
854.00
606.00
710.00
719.00
842.00
3-Pole
Isolated
Ground
4-Pole
4-Pole
200%
Neutral
805.00
957.00
1214.00
823.00
975.00
812.00
957.00
806.00
957.00
1214.00
824.00
975.00
816.00
957.00
SX313C1
668.00
788.00
1009.00
686.00
816.00
675.00
804.00
SX313C2
781.00
923.00
1162.00
799.00
957.00
791.00
941.00
SX313C3
888.00
1060.00
1333.00
906.00
1078.00
906.00
1078.00
SX316C1
761.00
906.00
1145.00
779.00
923.00
771.00
906.00
SX316C2
906.00
1060.00
1351.00
923.00
1094.00
906.00
1078.00
SX320C1
975.00
1145.00
1454.00
991.00
1162.00
975.00
1162.00
SX325C1
1231.00
1470.00
1864.00
1249.00
1488.00
1249.00
1470.00
SX412C3
4-Pole
Isolated
Ground
SX512C3
4-Pole
Isolated
Ground
200%
Neutral
1009.00
1197.00
1523.00
1025.00
1231.00
1025.00
1214.00
906.00
1078.00
1368.00
923.00
1094.00
923.00
1094.00
1112.00
1317.00
1675.00
1128.00
1351.00
1128.00
1333.00
957.00
1128.00
1436.00
975.00
1162.00
975.00
1145.00
1162.00
1386.00
1744.00
1180.00
1401.00
1180.00
1401.00
SX413C1
888.00
1060.00
1351.00
923.00
1078.00
906.00
1078.00
SX513C1
1128.00
1333.00
1693.00
1145.00
1351.00
1128.00
1351.00
SX413C2
1009.00
1197.00
1523.00
1025.00
1214.00
1025.00
1214.00
SX513C2
1231.00
1470.00
1864.00
1264.00
1488.00
1249.00
1488.00
SX413C3
1060.00
1264.00
1607.00
1078.00
1282.00
1078.00
1282.00
SX513C3
1299.00
1538.00
1949.00
1317.00
1556.00
1299.00
1556.00
SX316C3
1025.00
1214.00
1556.00
1043.00
1249.00
1043.00
1231.00
SX416C1
1025.00
1231.00
1556.00
1060.00
1249.00
1043.00
1231.00
SX516C1
1299.00
1538.00
1949.00
1317.00
1556.00
1299.00
1556.00
SX416C2
1162.00
1386.00
1744.00
1180.00
1401.00
1180.00
1386.00
SX516C2
1436.00
1693.00
2138.00
1454.00
1727.00
1436.00
1710.00
SX416C3
1231.00
1454.00
1846.00
1249.00
1488.00
1249.00
1470.00
SX516C3
1488.00
1779.00
2240.00
1523.00
1796.00
1505.00
1779.00
SX320C2
1112.00
1317.00
1675.00
1128.00
1351.00
1128.00
1333.00
SX320C3
1264.00
1505.00
1899.00
1282.00
1523.00
1264.00
1505.00
SX420C1
1264.00
1505.00
1899.00
1282.00
1523.00
1282.00
1505.00
SX520C1
1591.00
1881.00
2377.00
1607.00
1915.00
1591.00
1881.00
SX420C2
1419.00
1693.00
2138.00
1454.00
1710.00
1436.00
1710.00
SX520C2
1744.00
2070.00
2618.00
1762.00
2103.00
1762.00
2086.00
SX420C3
1505.00
1779.00
2257.00
1523.00
1812.00
1523.00
1796.00
SX520C3
1830.00
2172.00
2737.00
1846.00
2189.00
1830.00
2172.00
SX325C2
1454.00
1710.00
2172.00
1470.00
1744.00
1454.00
1727.00
SX325C3
1660.00
1967.00
2481.00
1675.00
1983.00
1660.00
1967.00
SX425C1
1660.00
1967.00
2481.00
1675.00
1983.00
1660.00
1983.00
SX525C1
2070.00
2463.00
3113.00
2103.00
2481.00
2086.00
2481.00
SX425C2
1864.00
2207.00
2804.00
1881.00
2240.00
1881.00
2222.00
SX525C2
2291.00
2702.00
3421.00
2309.00
2737.00
2291.00
2720.00
SX425C3
1967.00
2344.00
2959.00
1983.00
2359.00
1983.00
2344.00
SX525C3
2394.00
2839.00
3591.00
2412.00
2857.00
2394.00
2857.00
1350A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
2000A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
2500A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
IP40
IP55
Feeder Only
Outdoor
Discount Schedule BUSW
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-9
BUSWAY
SYSTEMS
1600A Copper
14
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Sentron® Straight Section Busway
Copper (3000 – 5000 Ampere)
Selection
3000A Copper
Basic Catalog Number
SX330C1
Add Suffix
To Basic
Catalog
Number
0F
4F
9F
0P
4P
0R
4R
Busway
Type
Feeder IP40
Feeder IP55
Feeder 3R
Plug-in IP40
Plug-in IP55
Riser IP40
Riser IP55
SX330C2
SX330C3
SX430C1
SX530C1
SX430C2
4-Pole
Internal
Ground
SX530C2
4-Pole
Internal
Ground
200%
Neutral
3-Pole
Internal
3-Pole
Ground
List Price Per Foot $
1505.00
1744.00
1779.00
2070.00
2240.00
2618.00
1523.00
1762.00
1796.00
2103.00
1505.00
1762.00
1796.00
2086.00
3-Pole
Isolated
Ground
4-Pole
4-Pole
200%
Neutral
2001.00
2359.00
2994.00
2018.00
2394.00
2001.00
2377.00
2001.00
2377.00
2994.00
2018.00
2394.00
2001.00
2377.00
SX332C1
1660.00
1968.00
2463.00
1676.00
1984.00
1660.00
1968.00
SX332C2
1933.00
2291.00
2891.00
1950.00
2326.00
1950.00
2309.00
SX332C3
2207.00
2618.00
3318.00
2224.00
2652.00
2224.00
2634.00
SX340C1
1949.00
2326.00
2925.00
1967.00
2344.00
1967.00
2326.00
SX340C2
2291.00
2720.00
3439.00
2309.00
2754.00
2309.00
2737.00
SX350C1
2326.00
2754.00
3489.00
2344.00
2788.00
2326.00
2770.00
SX350C2
2754.00
3249.00
4123.00
2770.00
3284.00
2754.00
3267.00
SX430C3
4-Pole
Isolated
Ground
SX530C3
4-Pole
Isolated
Ground
200%
Neutral
2496.00
2959.00
3762.00
2531.00
2994.00
2514.00
2976.00
2257.00
2667.00
3370.00
2275.00
2702.00
2257.00
2685.00
2754.00
3267.00
4138.00
2770.00
3302.00
2770.00
3284.00
2377.00
2822.00
3558.00
2394.00
2839.00
2394.00
2839.00
2873.00
3421.00
4328.00
2907.00
3439.00
2891.00
3439.00
SX432C1
2207.00
2634.00
3318.00
2241.00
2652.00
2224.00
2634.00
SX532C1
2771.00
3284.00
4157.00
2789.00
3318.00
2789.00
3302.00
SX432C2
2497.00
2960.00
3729.00
2515.00
2995.00
2497.00
2976.00
SX532C2
3045.00
3610.00
4585.00
3063.00
3644.00
3063.00
3627.00
SX432C3
2634.00
3130.00
3935.00
2652.00
3147.00
2565.00
3130.00
SX532C3
3182.00
3781.00
4789.00
3216.00
3797.00
3199.00
3797.00
SX340C3
2633.00
3130.00
3968.00
2651.00
3147.00
2651.00
3147.00
SX440C1
2633.00
3130.00
3968.00
2667.00
3165.00
2651.00
3147.00
SX540C1
3302.00
3917.00
4959.00
3317.00
3951.00
3317.00
3934.00
SX440C2
2976.00
3523.00
4464.00
2994.00
3558.00
2976.00
3541.00
SX540C2
3643.00
4310.00
5457.00
3660.00
4344.00
3643.00
4328.00
SX440C3
3147.00
3728.00
4704.00
3165.00
3746.00
3147.00
3728.00
SX540C3
3797.00
4516.00
5713.00
3831.00
4533.00
3815.00
4533.00
SX350C3
3165.00
3762.00
4755.00
3180.00
3780.00
3180.00
3762.00
SX450C1
3165.00
3762.00
4755.00
3180.00
3780.00
3180.00
3762.00
SX550C1
3968.00
4704.00
5952.00
3986.00
4738.00
3968.00
4720.00
SX450C2
3575.00
4225.00
5355.00
3591.00
4260.00
3575.00
4242.00
SX550C2
4362.00
5183.00
6552.00
4379.00
5200.00
4379.00
5183.00
SX450C3
3762.00
4464.00
5644.00
3780.00
4499.00
3780.00
4481.00
SX550C3
4567.00
5404.00
6842.00
4583.00
5439.00
4567.00
5422.00
BUSWAY
SYSTEMS
14
3200A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
4000A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
5000A Copper
Basic Catalog Number
Feeder IP40
0F
Feeder IP55
4F
Feeder 3R
9F
Plug-in IP40
0P
Plug-in IP55
4P
Riser IP40
0R
Riser IP55
4R
Feeder or Plug-in
Indoor
Splash Proof
14-10
IP40
IP55
Feeder Only
Outdoor
NEMA 3R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Sentron® Busway Systems
Busway Accessories
Ampere Elbow
Rating Stack Elbow Tee
Suffix
ES
EL TE
Selection
Flanged
End/
End
Center Swbd.
Tap Box Tap Box Conn.
ET
CT
FE
End
XFMR
Closure Throat
EC
VT
XFMR
Cable
Tap
1-3 PH
V3
XFMR
Cable
Tap
3-1 PH
V1
Expansion
Section
XP
Phase
RotaReducer Reducer tion
Fused
Unfused Section
RF
RN
PR
Flanges
Wall/
Floor
GW
Isolation
Joint
JI
Roof
Flange
GR
3-Pole
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
5000
830.
830.
830.
968.
968.
968.
968.
968.
1106.
1106.
1106.
1166.
1289.
1289.
873.
873.
873.
1019.
1019.
1019.
1019.
1019.
1165.
1165.
1165.
1224.
1355.
1355.
1048.
1048.
1048.
1048.
1165.
1165.
1165.
1165.
1165.
1428.
1428.
1516.
1705.
1705.
1996.
1996.
1996.
2055.
2156.
2272.
2681.
2594.
2900.
3205.
3409.
3585.
3934.
4649.
1996.
1996.
1996.
2055.
2156.
2272.
2389.
2594.
2900.
3205.
3409.
3599.
3934.
4649.
918.
976.
1268.
1369.
1560.
1748.
1792.
2214.
2346.
2783.
3322.
4138.
4138.
4867.
218.
218.
218.
218.
220.
220.
228.
228.
228.
279.
279.
279.
279.
279.
4270.
4270.
4270.
4750.
5202.
5640.
6003.
6528.
7476.
8613.
10537.
11047.
12053.
14253.
976.
976.
976.
1035.
1093.
1136.
1194.
1253.
1443.
1719.
2025.
2113.
2302.
2638.
2797.
2797.
2797.
2988.
3147.
3322.
3396.
3555.
3963.
4357.
4750.
5013.
2451.
2809.
1486.
1486.
1486.
1777.
1952.
2113.
2302.
2477.
2929.
3396.
3905.
4226.
4867.
5741.
2097.
2097.
2097.
2404.
2725.
3249.
3454.
3905.
4562.
5538.
6398.
7010.
8234.
10085.
1106.
1106.
1106.
1268.
1443.
1719.
1836.
2069.
2404.
2929.
3396.
3716.
4357.
5333.
1486.
1486.
1486.
1777.
1952.
2113.
2302.
2477.
2929.
3396.
3905.
4226.
4867.
5741.
199.
199.
199.
199.
210.
210.
210.
218.
218.
224.
224.
224.
224.
224.
844.
844.
844.
844.
903.
903.
903.
931.
931.
961.
961.
961.
961.
961.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1180.
1180.
1180.
1238.
998.
998.
998.
1019.
1019.
1019.
1106.
1106.
1355.
1355.
1355.
1443.
1618.
1618.
1048.
1048.
1048.
1078.
1078.
1078.
1165.
1165.
1428.
1428.
1428.
1515.
1705.
1705.
1223.
1223.
1223.
1223.
1311.
1311.
1311.
1311.
1705.
1705.
1705.
1792.
1981.
1981.
2069.
2069.
2069.
2272.
2375.
2594.
2710.
3001.
3292.
3730.
4022.
4329.
4955.
5669.
2069.
2069.
2069.
2272.
2375.
2594.
2710.
3001.
3292.
3730.
4022.
4329.
4955.
5669.
976.
1005.
1297.
1413.
1705.
1821.
1908.
2230.
2564.
3104.
3672.
3979.
4591.
5815.
218.
218.
218.
218.
220.
220.
228.
228.
228.
279.
279.
279.
279.
279.
4794.
4794.
4794.
5450.
4022.
6178.
7243.
7957.
9268.
10945.
12446.
13510.
15623.
18816.
1035.
1035.
1035.
1136.
1194.
1253.
1385.
1443.
1719.
1952.
2244.
2360.
2579.
3046.
2797.
2797.
2797.
2988.
3147.
3322.
3396.
3555.
3963.
4357.
4750.
5013.
5552.
6353.
1777.
1777.
1777.
2069.
2302.
2638.
2827.
3424.
3730.
4342.
5042.
5480.
6353.
7621.
2171.
2171.
2171.
3046.
3571.
4007.
4445.
5086.
5945.
7389.
8671.
9502.
11149.
13757.
1151.
1151.
1151.
1602.
1894.
2113.
2346.
2696.
3147.
3905.
4591.
5028.
5902.
7273.
1777.
1777.
1777.
2069.
2302.
2638.
2827.
3424.
3730.
4342.
5042.
5480.
6353.
7621.
199.
199.
199.
199.
210.
210.
210.
218.
218.
224.
224.
224.
224.
224.
844.
844.
844.
844.
903.
903.
903.
931.
931.
961.
961.
961.
961.
961.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1136.
1180.
1180.
1180.
1238.
4-Pole
Ampere
Rating
Elbow
Stack
Elbow
Tee
Cross
Tap Box
End
Tap Box
Center
Flanged
End
Swbd.
Conn.
225–1350 Al
225–1600 Cu
1'
2'
3'
4'
1'
4'
1'
4'
4'
4'
4'
1600–3200 Al
2000–4000 Cu
2'
3'
5'
6'
1'
4'
1'
4'
4'
4'
4'
4000 Al
5000 Cu
3'
4'
6'
8'
1'
4'
1'
4'
4'
4'
4'
“M” Rating/Standard
Rating Conversion Table
1000/A Square Inch
“M” Rating
Standard 55°C Rating
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
600
800
1200
1350
1600
2000
2000
Sentron
2500
4000
4000
4000
5000
Elbows
other than 90° double the labor charge.
connections to other manufactures switchboard,
multiply accessory charge by 2.5 (Suffix is FO).
Feeder only.
1600A “M” rating is a dedicated offering.
Consult factory for pricing.
XFMR
Throat
Expansion
Section
Reducer
Fusible
Reducer
Unfused
“L” Rating/Standard
Rating Conversion Table
750/A Square Inch
“L” Rating
Standard 55°C Rating
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
600
800
1000
1200
1350
1600
2000
2000
2500
3000
4000
4000
Sentron
Note: To price cross price 2 times elbow.
For
Discount Schedule BUSW
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-11
BUSWAY
SYSTEMS
To price complete device, add the following appropriate IP feeder footage to the accessory charge.
14
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
5000
Sentron Busway Systems
®
Hangers, Floor Supports
Trapeze Hangers
Catalog
Number
Selection
Structural Steel Hangers
List
Price $
Catalog
Number
List
Price $
Wall Mounted Hangers
Catalog
Number
List
Price $
SXTH1
26.00
SXSS1
36.00
SXWH1
160.00
SXTH2
35.00
SXSS2
44.00
SXWH2
183.00
SXTH3
40.00
SXSS3
51.00
SXWH3
232.00
SXTH4
54.00
SXSS4
60.00
SXWH4
273.00
Single Drop Rod Hangers
Aluminum
BUSWAY
SYSTEMS
14
Catalog
Number
Copper
List
Price $
Catalog
Number
List
Price $
SXDRA1
46.00
SXDRC1
54.00
SXDRA2
54.00
SXDRC2
66.00
SXDRA3
60.00
SXDRC3
74.00
SXDRA4
66.00
SXDRC4
80.00
SXDRA5
74.00
SXDRC5
86.00
SXDRA6
80.00
SXDRC6
92.00
SXDRA7
86.00
SXDRC7
104.00
Spring Hanger / Floor Support
Catalog
Number
List
Price $
SXSH4
235.00
SXSH6
243.00
SXSH8
255.00
SXSH10
264.00
SXSH12
273.00
SXSH14
282.00
Lifting Kit
Catalog
Number
SXLK
List
Price $
63.00
Sway Brace Bracket
Catalog
Number
SXSB
List
Price $
91.00
Busway Assembly Tool
Catalog
Number
SXBAT
See
List
Price $
63.00
pages 14-38 to 14-39 for Hanger Application
information.
14-12
Used
for mounting 400 and 600A Sentron Bus Plugs in
riser applications. One kit required per bus plug.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Sentron® Bus Plugs
Catalog Numbering System
Selection / Application
Sentron Bus Plugs—Circuit Breaker (Installed)
S L
E
C
S
䊱
䊱
䊱
䊱
햲
3
2
0 1 5
0
G
䊱
䊱
䊱
䊱
䊱
햳
E D 2
䊱
Plug Type
SL = Sentron II
Circuit Breaker Frame
E=
F=
J=
L=
M=
15–125A
70–250A
200–400A
250–600A
500–800A
Enclosure Type
C = Circuit Breaker Enclosure
L = Current Limiting Enclosure
Cradle Designation
S = 3Ø3W, 3Ø4W>400A
200%N>200A only
14
Configuration
3 = 3Ø, 3W
4 = 3Ø, 4W
5 = 3Ø, 4W 200% neutral햴햵
BUSWAY
SYSTEMS
Breaker Voltage
2 = 240V 햶
4 = 480V 햷
6 = 600V
Ampere Trip Rating
IP Rating
0 = IP40
4 = IP55
Ground Designation
G = Internal Ground
IG = Isolated Ground
Circuit Breaker Frame Identification
Sentron SLVB Bus Plugs—Fusible
S L
V B
R
3
2
1
0
G
䊱
䊱
䊱
䊱
䊱
䊱
䊱
䊱
Plug Type
SL = Sentron II
Heavy Duty Fusible Switch
VB
Orientation
R = Riser
H = Horizontal
Configuration (Poles/Wires)
3 = 3Ø3W
4 = 3Ø4W
5 = 3Ø4W 200% Neutral
Voltage
2 = 240V
6 = 600V
Max Ampere Rating
1 = 30A
2 = 60A
3 = 100A
4 = 200A
5 = 400A
6 = 600A
IP Rating
0 = IP40
4 = IP55
Ground Designation
G = Internal Ground
IG = Isolated Ground
햲 The
S digit is only used on 3- and 4-wire (100%N) plugs that are greater
than 400A and 200%N plugs greater than 200A. Lower amperage plugs
do not require this digit. (Ex. SLID3610, SLEC32060ED2)
햳 The G and IG digits are used to specify internal and isolated ground
respectively. Integral (housing) ground plugs do not require this digit.
(Ex. SLID3610, SLEC360150ED6)
햴 Available through 400A only.
햵 Available with E, F and J Frame breakers only.
햶 Available with ED2 breakers only.
햷 Available with ED4 and HHED6 breakers only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-13
Sentron® SLVB Bus Plugs
Bus Plugs / Fusible Plugs
Ampere
Rating
3-Pole, 250
30A
60A
100A
200A
400A햳햴
BUSWAY
SYSTEMS
14
600A햳햴
Ampere
Rating
3-Pole, 600
30A
60A
100A
200A
400A햳햴
600A햳햴
Catalog
Number
Volt 햲
List
Price $
Ampere
Rating
4-Pole, 250
734.00
833.00
877.00
807.00
907.00
950.00
1206.00
1307.00
1349.00
2017.00
2116.00
2160.00
5191.00
5291.00
5377.00
8064.00
8164.00
8251.00
SLVB*3210
SLVB*3210G
SLVB*3210IG
SLVB*3220
SLVB*3220G
SLVB*3220IG
SLVB*3230
SLVB*3230G
SLVB*3230IG
SLVB*3240
SLVB*3240G
SLVB*3240IG
SLVB*3250
SLVB*3250G
SLVB*3250IG
SLVB*3260
SLVB*3260G
SLVB*3260IG
Catalog
Number
Volt 햲
Selection
List
Price $
SLVB*3610
SLVB*3610G
SLVB*3610IG
SLVB*3620
SLVB*3620G
SLVB*3620IG
SLVB*3630
SLVB*3630G
SLVB*3630IG
SLVB*3640
SLVB*3640G
SLVB*3640IG
SLVB*3650
SLVB*3650G
SLVB*3650IG
SLVB*3660
SLVB*3660G
SLVB*3660IG
30A
100A
200A
400A햳햴
600A햳햴
Ampere
Rating
List
Price $
Catalog
Number
Volt,햲
30A
100A
200A
400A햳햴
600A햳햴
872.00
970.00
1014.00
893.00
992.00
1035.00
1409.00
439.00
1476.00
2316.00
2414.00
1684.00
5833.00
5933.00
6032.00
8229.00
8328.00
8427.00
List
Price $
SLVB*5210
SLVB*5210G
SLVB*5210IG
SLVB*5220
SLVB*5220G
SLVB*5220IG
SLVB*5230
SLVB*5230G
SLVB*5230IG
SLVB*5240
SLVB*5240G
SLVB*5240IG
SLVB*5250
SLVB*5250G
SLVB*5250IG
—
—
—
1010.00
1109.00
1191.00
1084.00
1183.00
1265.00
845.00
1578.00
676.00
2613.00
1841.00
2348.00
6241.00
6500.00
7152.00
—
—
—
Catalog
Number
List
Price $
List
Price $
200% Neutral햲
SLVB*4610
SLVB*4610G
SLVB*4610IG
SLVB*4620
SLVB*4620G
SLVB*4620IG
SLVB*4630
SLVB*4630G
SLVB*4630IG
SLVB*4640
SLVB*4640G
SLVB*4640IG
SLVB*4650
SLVB*4650G
SLVB*4650IG
SLVB*4660
SLVB*4660G
SLVB*4660IG
60A
Catalog
Number
200% Neutral햲
SLVB*4210
SLVB*4210G
SLVB*4210IG
SLVB*4220
SLVB*4220G
SLVB*4220IG
SLVB*4230
SLVB*4230G
SLVB*4230IG
SLVB*4240
SLVB*4240G
SLVB*4240IG
SLVB*4250
SLVB*4250G
SLVB*4250IG
SLVB*4260
SLVB*4260G
SLVB*4260IG
60A
4-Pole, 600
807.00
907.00
950.00
870.00
969.00
1013.00
1227.00
1328.00
1371.00
2139.00
2239.00
2283.00
5537.00
5637.00
5725.00
8005.00
8106.00
8205.00
Catalog
Number
Volt,햲
906.00
1005.00
1049.00
937.00
1036.00
1080.00
1376.00
1476.00
1519.00
2451.00
2476.00
2519.00
5977.00
6076.00
6176.00
8838.00
8937.00
9036.00
SLVB*5610
SLVB*5610G
SLVB*5610IG
SLVB*5620
SLVB*5620G
SLVB*5620IG
SLVB*5630
SLVB*5630G
SLVB*5630IG
SLVB*5640
SLVB*5640G
SLVB*5640IG
SLVB*5650
SLVB*5650G
SLVB*5650IG
—
—
—
1045.00
1142.00
1187.00
1074.00
1175.00
1219.00
1591.00
1601.00
1645.00
2642.00
2773.00
2817.00
7327.00
8427.00
9269.00
—
—
—
Note: Replace * in catalog number with “H” for horizontal applications and “R” for riser applications.
Ground Detector And
Potentializer Plug
Description
For 2 or 3-pole
240 and 480 volt
service.
(IP40 construction
only)
Fuse Adapter Kits
Catalog
Number
List
Price $
SLPGR3140G
819.00
Description
Catalog
Number
Spring Kit
SXSK
List
Price $
32.00
plugs shown are rated IP40; if IP55 rating is desired,
substitute a “4” for “0” in position 8 (or 9 for cradle
plugs) of catalog number and apply one of the following
list price adders:
30A, 60A: $229.
100A: $307.
200A: $579.
400A, 600A: $1039.
햳 400A and larger bus plugs that require auxilary support.
See also SXSK Spring Kit.
14-14
Std Fuse
Class
Class R
Catalog Number
List
Price $
Class T
Catalog
Number
List
Price $
Class J
Catalog
Number
List
Price $
250V
Note: Available in IP40 construction only.
햲 All
Switch
Rating
30A
60A
100A
200A
400A햳햴
600A햳햴
H,
H,
H,
H,
H,
H,
K
K
K
K
K, J
K, J
SLR2030
SLR2060
SLR2100
SLR2200
SLR2400
SLR2600
105.00
132.00
89.00
89.00
132.00
132.00
—
—
SLT2100
SLT2200
SLT2400
SLT2600
—
—
92.00
124.00
124.00
141.00
—
—
—
—
—
SLJ2600
—
—
—
—
—
529.00
H,
H,
H,
H,
H,
H,
K,
K,
K,
K,
K,
K,
SLR6030
SLR6060
SLR6100
SLR6200
SLR6400
SLR6600
124.00
124.00
89.00
89.00
132.00
132.00
—
—
SLT6100
SLT6200
SLT6400
SLT6600
—
—
141.00
172.00
185.00
210.00
—
—
—
—
—
SLJ6600
—
—
—
—
—
249.00
600V
30A
60A
100A
200A
400A햳햴
600A햳햴
J
J
J
J
J
J
햴 Used
on 400A and larger bus plugs that require auxilary
support and that are mounted on vertical/riser busway.
Kit contains two springs (part number 32-9909-04). One
kit required per bus plug.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BPLU
Sentron® Bus Plugs
Bus Plugs with Standard Circuit Breakers
Ampere
Rating
Catalog
Number
List
Price $
E Frame 3-Pole, 240 Volt, ED2 Breaker
15-60A
70-100A
SLEC32***0ED2
SLEC32***0GED2
SLEC32***0IGED2
SLEC32***0ED2
SLEC32***0GED2
SLEC32***0IGED2
1106.00
1210.00
1255.00
1106.00
1210.00
1255.00
E Frame 3-Pole, 480 Volt, ED4 Breaker
15-60A
70-100A
110-125A
SLEC34***0ED4
SLEC34***0GED4
SLEC34***0IGED4
SLEC34***0ED4
SLEC34***0GED4
SLEC34***0IGED4
SLEC34***0ED4
SLEC34***0GED4
SLEC34***0IGED4
1363.00
1468.00
1512.00
1512.00
1617.00
1662.00
1710.00
1817.00
1662.00
E Frame 3-Pole, 600 Volt, ED6 Breaker
110-125A
F Frame 3-Pole, 600 Volt, FXD6 Breaker
70-225A
250A
SLFC36***0FXD6
SLFC36***0GFXD6
SLFC36***0IGFXD6
SLFC362500FXD6
SLFC362500GFXD6
SLFC362500IGFXD6
3733.00
3838.00
3883.00
4453.00
4557.00
4603.00
J Frame 3-Pole, 600 Volt, JXD6 Breaker
200-400A
SLJC36***0JXD6
SLJC36***0GJXD6
SLJC36***0IGJXD6
7301.00
7405.00
7451.00
List
Price $
Ampere
Rating
Catalog
Number
E Frame 4-Pole, 240 Volt, ED2 Breaker
15-60A
70-100A
SLEC42***0ED2
SLEC42***0GED2
SLEC42***0IGED2
SLEC42***0ED2
SLEC42***0GED2
SLEC42***0IGED2
1262.00
1367.00
1411.00
1262.00
1367.00
1411.00
E Frame 200% Neutral
SLEC52***0ED2
SLEC52***0GED2
SLEC52***0IGED2
SLEC52***0ED2
SLEC52***0GED2
SLEC52***0IGED2
15-60A
70-100A
E Frame 4-Pole, 480 Volt, ED4 Breaker
15-60A
70-100A
110-125A
SLEC44***0ED4
SLEC44***0GED4
SLEC44***0IGED4
SLEC44***0ED4
SLEC44***0GED4
SLEC44***0IGED4
SLEC44***0ED4
SLEC44***0GED4
SLEC44***0IGED4
1520.00
1624.00
1670.00
1670.00
1773.00
1819.00
1869.00
1973.00
2018.00
15-60A
70-100A
110-125A
1661.00
1765.00
1809.00
1825.00
1930.00
1975.00
2027.00
2132.00
2178.00
SLEC54***0ED4
SLEC54***0GED4
SLEC54***0IGED4
SLEC54***0ED4
SLEC54***0GED4
SLEC54***0IGED4
SLEC54***0ED4
SLEC54***0GED4
SLEC54***0IGED4
15-60A
70-100A
110-125A
70-225A
250A
3855.00
3946.00
3992.00
4538.00
4665.00
4901.00
15-60A
70-100A
110-125A
200-400A
7940.00
8089.00
8089.00
70-200A
225-250A
450-600A
SLLCS36***0LXD6
SLLCS36***0GLXD6
SLLCS36***0IGLXD6
10457.00
10707.00
10838.00
2083.00
2187.00
2233.00
2253.00
2360.00
2407.00
2393.00
2498.00
2543.00
SLFC56***0FXD6
SLFC56***0GFXD6
SLFC56***0IGFXD6
SLFC56***0FXD6
SLFC56***0GFXD6
SLFC56***0IGFXD6
4177.00
4281.00
4326.00
4177.00
4281.00
4326.00
J Frame 200% Neutral
200A
225-400A
L Frame 3-Pole, 600 Volt, LXD6 Breaker
SLEC56***0ED6
SLEC56***0GED6
SLEC56***0IGED6
SLEC56***0ED6
SLEC56***0GED6
SLEC56***0IGED6
SLEC56***0ED6
SLEC56***0GED6
SLEC56***0IGED6
F Frame 200% Neutral
J Frame 4-Pole, 600 Volt, JXD6 Breaker
SLJC46***0JXD6
SLJC46***0GJXD6
SLJC46***0IGJXD6
1927.00
2032.00
2078.00
2101.00
2203.00
2249.00
2229.00
2339.00
2386.00
E Frame 200% Neutral
F Frame 4-Pole, 600 Volt, FXD6 Breaker
SLFC46***0FXD6
SLFC46***0GFXD6
SLFC46***0IGFXD6
SLFC462500FXD6
SLFC462500GFXD6
SLFC462500IGFXD6
1630.00
1734.00
1778.00
1630.00
1734.00
1778.00
E Frame 200% Neutral
E Frame 4-Pole, 600 Volt, ED6 Breaker
SLEC46***0ED6
SLEC46***0GED6
SLEC46***0IGED6
SLEC46***0ED6
SLEC46***0GED6
SLEC46***0IGED6
SLEC46***0ED6
SLEC46***0GED6
SLEC46***0IGED6
List
Price $
SLJC562000JXD6
SLJC562000GJXD6
SLJC562000IGJXD6
SLJCS56***0JXD6
SLJCS56***0GJXD6
SLJCS56***0IGJXD6
8275.00
8379.00
8425.00
8833.00
8939.00
8984.00
L Frame 4-Pole, 600 Volt, LXD6 Breaker
SLLCS46***0LXD6
450-600A SLLCS46***0GLXD6
SLLCS46***0IGLXD6
10999.00
11251.00
11382.00
Description
Catalog
Number
List
Price $
Spring Kit
SXSK
32.00
M Frame 3-Pole, 600 Volt, MXD6 Breaker M Frame 4-Pole, 600 Volt, MXD6 Breaker
500-800A
SLMCS36***0MXD6
12246.00
SLMCS36***0GMXD6 12617.00
SLMCS36***0IGMXD6 12681.00
Replace
“***” with breaker trip rating.
Example: SLEC36060ED6, for 60A trip.
plugs shown have an IP40 rating, if IP54/55 is desired
substitute ”4” for ”0” in position 10 (or 11 for cradle
plugs) and add the following charge:
E Frame: $149.
Ex. SLEC360604ED6
F Frame: $353.
Ex. SLFC360704FXD6
J Frame: $913.
Ex. SLJC36100JXD6
L Frame: $960.
Ex. SLLCS365004LXD6
M Frame: $1046. Ex. SLMCS368004MXD6
All
Discount Schedule BPLU
SLMCS46***0MXD6
500-800A SLMCS46***0GMXD6
SLMCS46***0IGMXD6
For
12972.00
13343.00
13405.00
the following breaker charges, change the catalog
number suffix and add the appropriate charge:
15-60A:
HHED6 $624.
Ex. SLEC36***0HHED6
70-100A: HHED6 $561.
Ex. SLEC36***0HHED6
110-125A: HHED6 $761.
Ex. SLEC36***0HHED6
F Frame: FD6
$446.
Ex. SLFC36***0FD6
F Frame: HFD6
$2777. Ex. SLFC36***0HFD6
J Frame: JD6
$189.
Ex. SLJC36***0JD6
J Frame: HJD6
$2772. Ex. SLJC36***0HJD6
L Frame: LD6
$189.
Ex. SLLCS36***0LD6
L Frame: HLD6
$2247. Ex. SLLCS36***0HLD6
M Frame: MD6
$588.
Ex. SLMCS36***0MD6
M Frame: HMD6 $2247. Ex. SLMCS36***0HMD6
400A
and larger bus plugs that require auxilary support.
See also SXSK Spring Kit.
on 400A and larger bus plugs that require auxilary
support and that are mounted on vertical/riser busway. Kit
contains two springs (part number 32-9909-04). One kit
required per bus plug.
Used
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-15
BUSWAY
SYSTEMS
70-100A
1503.00
1608.00
1653.00
1668.00
1772.00
1818.00
1870.00
1974.00
2019.00
Catalog
Number
14
15-60A
SLEC36***0ED6
SLEC36***0GED6
SLEC36***0IGED6
SLEC36***0ED6
SLEC36***0GED6
SLEC36***0IGED6
SLEC36***0ED6
SLEC36***0GED6
SLEC36***0IGED6
Ampere
Rating
Selection
Sentron® Bus Plugs
Bus Plugs with Current Limiting Circuit Breakers 햲햳
Ampere
Rating
Catalog
Number
List
Price $
E Frame 3-Pole, 600 Volt, CED6 Breaker
15-60A
70-100A
110-125A
SLEL36***0CED6
SLEL36***0GCED6
SLEL36***0IGCED6
SLEL36***0CED6
SLEL36***0GCED6
SLEL36***0IGCED6
SLEL36***0CED6
SLEL36***0GCED6
SLEL36***0IGCED6
4664.00
4769.00
4813.00
4664.00
4769.00
4813.00
4664.00
4769.00
4813.00
F Frame 3-Pole, 600 Volt, CFD6 Breaker
100-225A
8399.00
8504.00
8550.00
8407.00
8512.00
8557.00
J Frame 3-Pole, 600 Volt, CJD6 Breaker
200-400A햴
BUSWAY
SYSTEMS
14
250A
SLFL36***0CFD6
SLFL36***0GCFD6
SLFL36***0IGCFD6
SLFL362500CFD6
SLFL362500CGFD6
SLFL362500ICGFD6
SLJL36***0CJD6
SLJL36***0CGJD6
SLJL36***0ICGJD6
12708.00
12812.00
12858.00
Ampere
Rating
Catalog
Number
Selection
List
Price $
Ampere
Rating
E Frame 4-Pole, 600 Volt, CED6 Breaker
15-60A
70-100A
110-125A
SLEL46***0CED6
SLEL46***0GCED6
SLEL46***0IGCED6
SLEL46***0CED6
SLEL46***0GCED6
SLEL46***0IGCED6
SLEL46***0CED6
SLEL46***0GCED6
SLEL46***0IGCED6
4821.00
4926.00
4971.00
4821.00
4926.00
4971.00
4821.00
4926.00
4971.00
100-225A
250A
8508.00
8613.00
8658.00
8843.00
8948.00
8993.00
15-60A
70-100A
110-125A
200-400A햴
13347.00
13452.00
13498.00
70-200A
225-250A
450-600A햴
햲
SLLLS36***0CLD6
SLLLS36***0GCLD6
SLLLS36***0IGCLD6
16688.00
16940.00
17070.00
Replace “***” with breaker trip rating.
Example: SLEC36060ED6, for 60A trip.
햳 All plugs shown have an IP40 rating, if IP54/55 is
desired, substitute ”4” for ”0” in position 10 (or 11 for
cradle plugs) and add the following charge:
E Frame: $149. Ex. SLEC360604ED6
F Frame: $353. Ex. SLFC360704FXD6
J Frame: $913. Ex. SLJC361004JXD6
L Frame: $960. Ex. SLLCS365004LXD6
M Frame:$1046. Ex. SLMCS368004MXD6
14-16
5373.00
5478.00
5522.00
5373.00
5478.00
5522.00
5373.00
5478.00
5522.00
SLFL56***0CFD6
SLFL56***0GCFD6
SLFL56***0IGCFD6
SLFL56***0CFD6
SLFL56***0GCFD6
SLFL56***0IGCFD6
8843.00
8948.00
8993.00
8843.00
8948.00
8993.00
J Frame 200% Neutral
200A햴
225-400A햴
L Frame 3-Pole, 600 Volt, CLD6 Breaker
SLEL56***0CED6
SLEL56***0GCED6
SLEL56***0IGCED6
SLEL56***0CED6
SLEL56***0GCED6
SLEL56***0IGCED6
SLEL56***0CED6
SLEL56***0GCED6
SLEL56***0IGCED6
F Frame 200% Neutral
J Frame 4-Pole, 600 Volt, CJD6 Breaker
SLJL46***0CJD6
SLJL46***0GCJD6
SLJL46***0IGCJD6
List
Price $
E Frame 200% Neutral
F Frame 4-Pole, 600 Volt, CFD6 Breaker
SLFL46***0CFD6
SLFL46***0GCFD6
SLFL46***0IGCFD6
SLFL462500CFD6
SLFL462500GCFD6
SLFL462500IGCFD6
Catalog
Number
SLJL562000CJD6
SLJL562000GCJD6
SLJL562000IGCJD6
SLJLS56***0CJD6
SLJLS56***0GCJD6
SLJLS56***0IGCJD6
13786.00
13832.00
13681.00
14241.00
14346.00
14392.00
L Frame 4-Pole, 600 Volt, CLD6 Breaker
450-600A햴
SLLLS46***0CLD6
SLLLS46***0GCLD6
SLLLS46***0IGCLD6
17232.00
17483.00
17613.00
햴 400A
and larger bus plugs that require auxilary support.
See also SXSK Spring Kit.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BPLU
Sentron Busway Systems
®
Fusible Cubicles, Molded Case Circuit Breaker Cubicles
Fusible Cubicles
Selection
Solid State Molded Case Circuit Breaker Cubicles
List Price $
List Price $
Ampere
Rating
200
400
600
800
1200
3-Pole, 600V
4-Pole, 480/277V
IP40
IP40
7800.
8514.
10942.
16546.
20152.
7925.
10139.
13066.
17957.
22508.
Molded Case Circuit Breaker Cubicles
List Price $
Ampere
Rating
3-Pole, 600V
4-Pole, 480/277V
IP40
IP40
JD6
LD6
MD6
ND6
PD6
RD6
200–400
300–600
600–800
800–1200
1400–1600
1800–2000
10708.
16849.
22828.
28844.
33682.
38269.
11138.
17385.
24043.
29540.
34147.
38841.
Breaker
Frame
Size
Maximum
Ampere
Rating
AC Interrupting Capacity
Symmetrical (RMS) Amperes
List Price $
With Breaker
240 Volt
3-Pole
480 Volt
600 Volt
RL-800
RL-1600
RL-2000
RL-3200
RL-4000
30,000
50,000
65,000
65,000
85,000
30,000
50,000
65,000
65,000
85,000
30,000
50,000
65,000
65,000
85,000
25828.
37361.
54090.
114720.
166200.
43495.
76130.
83086.
174007.
261011.
Type RL (Fused)
RLF-800
RLF-3200
RLF-4000
800
3200
4000
200,000
200,000
200,000
200,000
200,000
200,000
200,000
200,000
200,000
40149.
68564.
166516.
42165.
70388.
170280.
9093.
12709.
11251.
15201.
200–400
8745.
12329.
10873.
14836.
SLD6
SLD6G
SLD6NT
SLD6NGT
300–600
13758.
17125.
15784.
19850.
14195.
17562.
16192.
20302.
SMD6A
SMD6AG
SMD6ANT
SMD6ANGT
600–800
19530.
21788.
19922.
21628.
20491.
22707.
20928.
22780.
SND6A
SND6AG
SND6ANT
SND6ANGT
800–1200
25243.
26263.
26059.
29993.
25796.
28085.
26627.
30548.
SPD6
SPD6G
SPD6NT
SPD6NGT
1400–1600
27502.
27590.
29484.
30840.
27880.
27982.
24281.
31232.
Bolted Pressure Switches
List Price $
Ampere
Rating
800
1600
2000
3200
4000
IP40
SJD6
SJD6G
SJD6NT
SJD6NGT
3-Phase,
4-Wire
Type RL
4-Pole, 480/277V
IP40
BUSWAY
SYSTEMS
Power Circuit Breaker
Ampere
Rating
14
Breaker
Frame
Breaker
Frame
3-Pole, 600V
480 Volt
600 Volt
3-Pole
4-Pole
3-Pole
4-Pole
800
18245.
24396.
25156.
25625.
1200
27475.
28135.
28832.
29529.
1600
30048.
30974.
31594.
32495.
2000
36778.
37856.
38616.
39769.
2500
43596.
45041.
45763.
47297.
3000
56168.
57867.
58982.
60832.
4000
79120.
81933.
83075.
86040.
Fuses
not included.
IP55 rating add 12% to list price.
For electrically operated, specify control voltage.
For
Discount Schedule BUSW
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-17
Sentron Busway Systems
®
Meter Centers
Selection
Molded Case Circuit Breaker Cubicles
with Meter Tap Stack Provisions
Meter Center Tap Stacks—IP40
List Price $
Busway
L Frame Breaker
N Frame Breaker
Aluminum Busway
600A - 1200A
8503.
13030.
1350A - 1600A
10150.
14677.
2000A - 3000A
12346.
16871.
Copper Busway
9875.
14402.
2000A
11796.
16323.
2500A - 4000A
15912.
20439.
5000A
18655.
23182.
3-Pole
Isolated
Ground
4-Pole
4-Pole
Internal
Ground
4-Pole
Isolated
Ground
100
1005.
1122.
1194.
1355.
1456.
1618.
200
400
600
800
1000
1200
1063.
1106.
1165.
1210.
1268.
1311.
1180.
1223.
1281.
1339.
1398.
1456.
1268.
1326.
1385.
1443.
1501.
1560.
1428.
1501.
1560.
1631.
1705.
1763.
1530.
1602.
1675.
1748.
1821.
1894.
1689.
1777.
1850.
1861.
2011.
2097.
Note: Prices do not include meter centers.
BUSWAY
SYSTEMS
14
800A - 1600A
Amps
List Price $
3-Pole
Internal
3-Pole
Ground
For
For
IP55 rating add 12% to list price.
IP55 add 28% add to list price.
14-18
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Busway Systems
National Electric Code
feeder or branch circuits from the
busway shall contain the over current
devices required for the protection of
the feeder or branch circuits. The
plug0in device shall consist of an
externally operable circuit breaker or an
externally operable fusible switch.
Where such devices are mounted out of
reach and contain disconnecting means,
suitable means such as ropes, chains or
sticks shall be provided for operating the
disconnecting means from the floor.
Exception No.1: As permitted in 240.21.
Exception No. 2: For fixed or semi fixed
luminaries (light fixtures), where the
branch circuit over current device is part
of the luminaries (fixture) cord plug on
cord-connected luminaries (fixtures).
Exception No.3: Where luminaries
(fixtures) without cords are plugged in
directly into busway and the over current
device is mounted on the luminaries
(fixture).
(D) Rating of Over Current Protection
– Branch Circuits. A busway used as a
branch circuit shall be protected against
over current in accordance with 210.20.
368.30 Support. Busways shall be
securely supported at intervals not
exceeding 1.5 m (5 ft) unless otherwise
designed and marked.
368.50 Branches from Busways.
Branches from busways shall be
permitted to be made in accordance
with 368.56(A), (B) and (C).
(A)General. Branches from busways
shall be permitted to use any of the
following wiring methods:
(1) Type AC Armored Cable
(2) Type MC metal-clad Cable
(3) Type MI mineral-insulated, metal
sheathed cable
(4) Type IMC intermediate metal conduit
(5) Type RMC rigid metal conduit
(6) Type FMC flexible metal conduit
(7) Type LFMC liquid tight flexible metal
conduit
(8) Type RNC rigid nonmetallic conduit
(9) Type LFNC liquid tight flexible
nonmetal conduit
(10 Type EMT electrical metallic tubing
(11) Type ENT electrical nonmetallic
tubing
(12) Busways
(13) Strut-type channel raceway
(14) Surface Metal raceways
(15) Surface nonmetallic raceways
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-19
BUSWAY
SYSTEMS
riser busway to prevent liquids from
entering the opening. Electrical
equipment shall be located so that it will
not be damaged by liquids that are
retained by the curb.
FPN: See 300.21 for information
concerning the spread of fire or products
of combustion.
368.12 Uses Not Permitted.
(A) Physical Damage. Busways shall
not be installed where subject to severe
physical damage or corrosive vapors.
(B) Hoist ways. Busways shall not b
installed in Hoist ways.
(C) Hazardous Locations. Busways
shall not be installed in any hazardous
(Classified) location, unless specifically
approved for such use.
FPN: See 501.10(B)
(D) Wet Locations. Busway shall not be
installed outdoors or in wet damp
locations unless identified for such use.
(E) Working Platform. Lighting busway
and trolley busway shall not be installed
less than 2.5 m (8 ft) above the floor or
working platform unless provided with a
cover identified for the purpose.
368.17 Over current Protection. Over
current protection shall be provided in
accordance with 368.17(A) through (D).
(A) Rating of over current protection –
Feeders. A busway shall be protected
against over current in accordance with
the allowable current rating of the
busway.
Exception No. 1: The applicable
provisions of 240.4 shall be permitted.
Exception No. 2: Where used as
transformer secondary ties, the
provisions of 450.6(A)(3) shall be
permitted.
(B) Reduction in Ampacity Size of
Busway. Over current protection shall
be required where busways are reduced
in ampacity.
Exception: For industrial establishments
only, omission of over current protection
shall be permitted at points where
busway are reduced in ampacity,
provided that the length of the busway
having the smaller ampacity does not
exceed 15m(50ft) and has ampacity at
least equal to one-third the rating or
setting of the over current device next
back on the line, and provided that such
busway is free from contact with
combustible material.
(C) Feeder or Branch Circuits. Where a
busway is used as a feeder, devices or
plug-in connections for tapping off
14
I.General Requirements
368.1 Scope. This article covers serviceentrance, feeder and branch-circuit
busways and associated fittings.
368.2 Definition.
Busway. A grounded metal enclosure
containing factory-mounted, bare or
insulated conductors, which are usually
copper or aluminum bars, rods or tubes.
FPN: For cables, refer to article 370.
II. Installation
368.10 Uses Permitted. Busways shall
be permitted to be installed where they
are located in accordance with 368.10(A)
through (C).
(A) Exposed. Busways shall be
permitted to be located in the open
where visible, except as permitted in
368.10 (C).
(B) Concealed. Busways shall be
permitted to be installed behind access
panels, provided the busways are totally
enclosed, of non-ventilating-type
construction and installed so that the
joints between sections and at fittings
are accessible for maintenance
purposes. Where installed behind access
panels, means of access shall be
provided and either of the following
conditions shall be met:
(1) The space behind the access panels
shall not be used for air-handling
purposes.
(2) Where the space behind the access
panels is used for environmental air,
other than ducts and plenums, there
shall be no provisions for plug-in
connections and the conductors shall be
insulated.
(C) Through walls and Floors.
Busways shall be permitted to be
installed through walls and floors in
accordance with (C)(1) and (C)(2).
(1) Walls. Unbroken lengths of busway
shall be permitted to be extended
through dry walls.
(2) Floors. Floor penetrations shall
comply with (a) and (b).
(a) Busways shall be permitted to be
extended vertically through dry floors if
totally enclosed (unventilated) where
passing through and for a minimum
distance of 1.8m (6ft) above the floor to
provide adequate protection from
physical damage.
(b) In other than industrial
establishments, where a vertical riser
penetrates two or more dry floors, a
minimum 100mm (4 in) high curb shall
be installed around all floor openings for
Technical
Busway Systems
BUSWAY
SYSTEMS
14
National Electric Code
Where a separate equipment grounding
conductor is used, connection of the
equipment grounding conductor to the
busway shall comply with 250.8 and
250.12.
(B) Cord and Cable Assemblies.
Suitable cord and cable assemblies
approved for extra-hard usage and hard
usage, and listed bus drop cable shall be
permitted as branches from the busway
for the connection of portable equipment
or the connection of stationary
equipment to facilitate their interchange
in accordance with 400.7 and 400.8 and
the following conditions:
(1) The cord or cable shall be attached to
the building by the approved means.
(2) The length of the cord or cable form
a busway plug-in device to a suitable
tension take-up support device shall not
exceed 1.8 m (6 ft.).
(3) The cord and cable shall not be
installed as a vertical riser from the
tension take-up support device to the
equipment served.
(4) Strain relief cable grips shall be
provided for the cord or cable at the
busway plug-in device and equipment
terminations.
Exception to (B)(2): In industrial
establishments only, where the
conditions of maintenance and
supervision ensure that only qualified
persons service the installation, lengths
exceeding 1.8 m (6 ft.) shall be
permitted between the busway plug-in
device and the tension take-up support
device where the cord or cable is
supported at intervals not exceeding
2.5 m (8 ft.).
(C) Branches from Trolley-Type
Busways. Suitable cord and cable
assemblies approved for extra-hard sage
or hard-usage and listed bus drop cable
shall be permitted as branches from
trolley-type busways for the connection
of moveable equipment in accordance
with 400.7 and 400.8.
368.58 Dead Ends. A dead end of a
busway shall be closed.
368.60 Grounding. Busway shall be
grounded.
III. Construction
368.120 Marking. Busway shall be
marked with the voltage and current
rating for which they are designed and
with the manufacturers name or
trademark in such a manner as to be
visible after installation.
14-20
Technical
IV. Requirements for over 600 Volts,
Nominal
368.214 Adjacent and Supporting
Structures. Metal enclosed busways
shall be installed so that temperature
rise from induced circulating currents in
any adjacent metallic parts will not be
hazardous to personnel or constitute a
fire hazard.
368.234 Barriers and Seals.
(A) Vapor Seals. Busway runs that have
sections located inside and outside of a
building shall have a vapor seal at the
building wall to prevent interchange of
air between indoor and outdoor sections.
Exception: Vapor seals shall not be
required in forced-cooled bus.
(B) Fire Barriers. Fire barriers shall be
provided where fire walls, floors and
ceilings are penetrated.
FPN: See 300.21 for information
concerning the spread of fire or products
of combustion.
368.236 Drain Facilities. Drain plugs,
filter drains or similar methods shall be
provided to remove condensed moisture
from low points on a busway run.
368.237 Ventilated Bus Enclosures.
Ventilated busway enclosures shall be
installed in accordance with Article 110,
Part III and 490.24.
368.238 Terminations and
Connections. Where bus enclosures
terminate at machines cooled by
flammable gas, seal-off bushings, baffles
or other means shall be provided to
prevent accumulation of flammable gas
in the busway enclosures. All conductor
termination and connection hardware
shall be accessible for installation,
connection and maintenance.
368.239 Switches. Switching devices or
disconnecting links provided in the
busway run shall have the same
momentary rating as the busway.
Disconnecting links shall be plainly
marked to be removable only when the
bus is de-energized. Switching devices
that are not load-break shall be
interlocked to prevent operation under
load and disconnecting link enclosures
shall be interlocked to prevent access to
energized parts.
368.240 Wiring 600 Volts or Less,
Nominal. Secondary control devices and
wiring that are provided as part of the
metal-enclosed bus run shall be
insulated by fire-retardant barriers from
all primary circuit elements with the
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
exception of short lengths of wire, such
as at instrument transformer terminals.
368.244 Expansion Fittings. Flexible or
expansion connections shall be provided
in long, straight runs of bus to allow for
temperature expansion or contraction or
where the busway run crosses the
building vibration insulation joints.
368.258 Neutral. Neutral bus, where
required shall be sized to carry all neutral
load current, including harmonic currents
and shall have adequate momentary and
short circuit rating consistent with
system requirements.
368.260 Grounding. Metal-enclosed
busway shall be grounded.
368.320 Marking. Each busway run
shall be provided with a permanent
nameplate on which the following
information shall be provided:
(1) Rated voltage.
(2) Rated continuous current; if bus is
forced-cooled, both the normal forcedcooled rating and the self-cooled (not
forced-cooled) rating for the same
temperature rise shall be given.
(3) Rated frequency.
(4) Rated impulse withstand voltage.
(5) Rated 60Hz withstand voltage (dry).
(6) Rated momentary current.
(7) Manufacturers name or trademark.
FPN: See ANSI C37.23-1987(R1991),
Guide for Metal enclosed Bus and
Calculating Losses in Isolated-Phase
Bus, for construction and testing
requirements for metal enclosed bus.
Busway Systems
Sentron Busway Overview
Sentron Busway for Global
Power Distribution Applications
Plating
All bus bars are electroplated with tin.
This unique tin plating provides excellent
conductivity and resists outside
elements from attaching to the bars.
Optional silver plating is also available.
Insulation
Sentron Busway is insulated with an
Epoxy Powder Coating system designed
by Siemens Engineers, Epoxy System
Engineers and Epoxy Powder
Specialists, specifically for Siemens
Busway products.
The Siemens exclusive Electrostatic
Spray insulation process produces
uniform application of Epoxy powder
over the entire conductor bar. This is
further enhanced by the inline filter
process and magnetic separator that
helps to eliminate contaminants
common to fluidized bed systems. The
electrostatic application also provides a
better coating consistency than that of
the older fluidized bed process. The
combination of electrostatic spray and
lower oven temperatures produces a
consistent coverage with fewer
impurities and pinholes in the insulation.
The lower oven temperatures reduce the
risk of bar annealing, which affects the
overall quality of the system.
Sentron Busway insulation is Class B,
130°C Rated. Every bus bar and
completed assembly is dielectricly
tested to ensure the insulation is free
of defects.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-21
BUSWAY
SYSTEMS
Housing
Sentron Busway incorporates an all
aluminum housing. This lightweight
totally enclosed, non-ventilated housing
resists rust and other elements,
distributes heat away from the
conductors, and provides an excellent
ground path. The totally enclosed design
also eliminates the need for derating of
the system regardless of installation
orientation. The housing is covered with
an electrostatically applied light gray
ANSI 61 polyester urethane powder
paint that is scratch resistant and has a
1,000-hour salt spray resistance rating.
Conductors
Sentron Busway conductors have a
compact construction and can be
configured as 3-phase 3-wire, 3-phase
4-wire or 3-phase 4-wire with 200%
neutral. The conductors may be ordered
in copper (98% conductivity), 1000A/in2
M-Rated Copper, Aluminum (58%
conductivity) and 750A/in2 L-Rated
Aluminum. The optional 200% neutral
helps to handle harmonic conditions that
may exist. This system is especially
useful with discharge lighting
(fluorescent) and computer installations.
This will help to minimize overheating
and prolong the life cycle of your power
distribution equipment.
Ground
Sentron Busway offers ground options
to meet your specifications: standard
integral aluminum housing ground and
optional internal grounding bars. An
optional isolated ground is also available
which is especially useful in applications
where a clean ground is needed.
14
Building on a solid foundation of
advanced products for the construction
industry, the Siemens Sentron name is
recognized worldwide as synonymous
with quality and consistent performance.
Sentron Busway delivers impressive
features and benefits that make it ideal
for many types of industrial and
construction implementations.
Engineered to ensure the safe and
efficient distribution of power in
industrial, commercial and institutional
environments world-wide, Sentron
ampacities range from 225A to 5000A
UL and IEC. Thanks to an innovative
design, you benefit from labor-saving
installation and a flexible, compact bus
system that is an ideal fit for most
applications. In fact, Sentron Busway is
one of the industry's least laborintensive systems.
Sentron Busway installs with minimal
hardware and often costs less than
cable and conduit installations. The
lightweight aluminum housing acts as an
integral ground, joint stacks connect
with splice plates featuring a single-bolt
design, and bus plugs and cable tap
boxes offer the industry's largest wire
bending space. An optional 200%
neutral within the bus bar housing
accommodates harmonics common in
today's power systems.
Sentron Busway conductors are
insulated with a state-of-the-art epoxy
insulation system, which is applied using
an electrostatic spray process for
optimal insulation integrity.
Exemplifying the spirit of continuing
innovation, Sentron Busway is now
available with economical and
convenient elbow stacks for changing
left, right, up or down directions at 90
degrees.
And, of course, Sentron Busway is
certified to design standards worldwide,
including UL, NEMA, IEC, CSA, VDE
and BS.
Siemens Busway Business uses
industry leading technology in all its
manufacturing processes. From bus bar
fabrication to Electrostatic Spray Epoxy
insulation, all the processes used in the
manufacturing of Siemens Sentron
Busway are electronically controlled to
provide for consistent, high quality
results, making Sentron Busway
products best in its class.
Overview
Busway Systems
BUSWAY
SYSTEMS
14
Sentron Busway Overview
Joint Stack
Each Sentron Busway piece is shipped
with a joint stack and joint covers
installed at one end of the busway and a
shipping end protector at the other end.
The joint stacks feature a single bolt
design and a special, torque indicating,
double headed break-off bolt. This
eliminates the need for torque wrenches
and assures proper torque at installation
of 55 ft.-lbs.(68 N-m). When the proper
torque value is achieved, the top bolt
head will shear off. Each joint stack
allows for +/- .625 inches (15.8mm)
adjustability at each joint. Over
adjustment is prevented by the joint
covers, which will only allow a .625 inch
(15.8mm) adjustment when the
knockouts on the joint cover are
removed. It is possible to remove any
joint connection assembly to allow
electrical isolation or removal of a
busway length without disturbing
adjacent busway lengths. Isolation joint
stacks are available and used to
electrically isolate a busway section(s)
within a busway run. For easy visual
identification, isolation joint stack
assemblies are painted white.
Overview
Plug-in Opening
Sentron Busway offer plug-in style
busway which feature plug-in openings
rated for finger safety to IP2X in
accordance with IEC 529 and BS EN
60439-1, -2 and BS EN 60529.
Each plug-in opening has a reversible
hinged dead front designed to protect
the contact surfaces from dirt, dust or
moisture. Gasketing is used where
applications require a splash proof
(IP55) rating.
IP Ratings
Sentron Busway is available in a variety
of IP ratings. Use the chart below to
determine the IP rating that best fits
your application needs.
Testing
Each piece of Sentron Busway is factory
tested before shipping. Tests performed
include dielectric tests, which are used
to insure integrity of insulation. In
addition, Sentron Busway is tested in
accordance with both UL and IEC
standards. All Sentron Busway is
manufactured and inspected in an ISO
9001:2000 registered facility.
Standards
All Sentron Busway products meet the
following standards:
UL 857
NEMA BU1
CSA C22.2
IEC 439-1(1993), IEC 439-2 (1993),
IEC 529 (1989)
BS EN 60529
BS EN 60439-1, 60439-2
UL 1479
DIN 4102 Parts 9&12
BS 6387 Parts 11.1 and 11.2
Labor Savings
Using Sentron Busway instead of cable
and conduit can create savings of up to
20 - 30% on total installed costs. Sentron
busway is lightweight, compact and
takes half the time to install as cable and
conduit. Siemens Sentron Busway Cable/Conduit Conversion Software
Program will show you side by side
comparisons of busway vs. cable/conduit.
These comparisons include material
costs, labor costs, bill of materials, and
technical information between busway
and cable/conduit. Contact your local
Siemens sales office to find out more
information, or visit our web site at
www.sea.siemens.com.
Joint Assembly
Plug-In Opening and Cover
Levels of Protection Description
Sentron Busway
Code
Description
Feeder
Plug-In
Sentron Bus Plugs
IP 2X
Plug-In outlet protects against access to live parts by .472 in. (12 mm) test probe, even with cover
opened. Finger Safe
•
•
•
IP 40
Enclosure protects against entry of .039 in. (1.0 mm) test probe. Indoor (Typical UL Designation)
•
•
•
IP 55
Enclosure protects against entry of dust and water jets. Splash Proof
•
•
•
IP 66
Enclosure is dust tight and protects against powerful water jets. Outdoor (International Only)
•
NEMA 3R
Enclosure protects against rain, sleet and damage from ice formation. Outdoor - NAFTA
•
14-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Sentron Bus Plug Overview
Enclosure Ratings:
▪ IP40
▪ IP55
Conductors:
▪ 3-phase, 3-wire
▪ 3-phase, 4-wire
▪ 3-phase, 4-wire 200% neutral (400A
and below)
Grounding:
▪ Integral (Housing)
▪ Internal
▪ Isolated
BUSWAY
SYSTEMS
installation of the unit. Guide stabs
prevent installing the bus plug 180
degrees out of rotation. In addition, the
stabs provide vertical support for vertical
applications. The bus plug ground stabs
are designed to ensure positive contact
with both the integral and optional
internal busway grounds before the bus
plug fingers contact the phase and
neutral bars. Sentron Bus Plugs also
feature bolt-on mounting to the busway
housing for secure attachment.
Sentron Bus Plugs can be configured for
horizontal or vertical applications. The
following Bus Plugs can be mounted
(side by side) five (5) per busway side
channel (Total 10 per 10' Section).
▪ 30-600 SLVBH Fusible (Horizontal)
▪ 30-200 SLVBR Fusible (Riser)
▪ 30-400 Circuit Breaker
Sentron SLVB Fusible Bus Plugs feature
a direct drive mechanism. The operating
handle mounts directly to the switch
mechanism for fewer moving parts.
14
SENTRON Bus Plugs are engineered
with the installer and end user in mind.
The installer will benefit from the
numerous features, such as factory
installed circuit breakers, compact
footprint, generous wirebend space, and
dual interlocks. The end user will
appreciate the visible position indicator,
as well as the spring loaded pad lockable
latch which prevents access to
unauthorized personel.
SENTRON Bus Plugs are designed with
an interlock device to prevent the door
from being opened when the disconnect
is on. This also prevents the disconnect
from being turned on while the door is
open. The interlock ensures that the
protective device is “OFF” prior to
installation or removal of the bus plug.
Once the bus plug is properly installed,
a spring - loaded, padlock latch provides
additional security by preventing
unauthorized access to the unit.
Alignment and interlock stabs are
features of the Sentron Bus Plugs
engineered to prevent improper
Overview
Note: SLVBH Horizontal Application Shown.
Contact Siemens for 200% Neutral Applications.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-23
Busway Systems
Technical Data
BUSWAY
SYSTEMS
14
Technical
R, X, Z and Ohms, Voltage Drop
Ampere
AL
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
Rating
L-Rated 햴
—
—
—
400
600
800
1000
1200
1350,1600
2000
2500
2000
3000,3200
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated 햴
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Bus Bar Width
x 0.25 in.
(6.4mm) Thick
Ohms x 10.3 per 100 feet
Line to Neutral
R
X
Z
(2)
(2)
(2)
(2)
1.75 (44.5)
1.75 (44.5)
1.75 (44.5)
2.38 (60.5)
3.25 (82.6)
4.38 (111.3)
5.38 (138.7)
6.50 (165.1)
8.75 (222.3)
5.63 (143.0)
6.75 (171.5)
7.50 (190.5)
9.00 (228.6)
3.94
4.08
4.26
3.42
2.45
1.86
1.39
1.21
0.91
0.68
0.54
0.48
0.62
1.13
1.23
1.32
1.06
0.74
0.59
0.24
0.48
0.35
0.29
0.28
0.33
0.21
4.10
4.26
4.46
3.58
2.56
1.95
1.41
1.29
0.98
0.74
0.61
0.58
0.51
0.88
1.66
2.64
2.82
2.50
2.32
1.50
2.19
2.11
2.09
2.24
2.53
2.34
1.02
1.91
3.03
3.24
2.88
2.66
1.81
2.48
2.38
2.34
2.47
2.73
2.61
1.15
2.15
3.40
3.64
3.24
2.99
2.10
2.75
2.64
2.57
2.67
2.91
2.85
1.27
2.38
3.75
4.02
3.57
3.29
2.39
3.00
2.87
2.78
2.85
3.06
3.08
1.39
2.58
4.08
4.36
3.89
3.58
2.67
3.23
3.08
2.97
3.01
3.17
3.27
1.49
2.77
4.37
4.67
4.17
3.82
2.93
3.43
3.26
3.12
3.12
3.23
3.43
1.57
2.91
4.58
4.90
4.38
4.01
3.17
3.56
3.37
3.21
3.16
3.20
3.51
1.54
2.83
4.43
4.74
4.24
3.87
3.25
3.35
3.16
2.95
2.80
2.68
3.20
(2)
(2)
(2)
(2)
1.75 (44.5)
1.75 (44.5)
1.75 (44.5)
1.75 (44.5)
2.25 (67.2)
2.88 (73.2)
3.50 (88.9)
4.50 (114.3)
6.00 (152.4)
—
8.50 (215.9)
4.75 (120.7)
5.50 (139.7)
6.50 (165.1)
8.50 (215.9)
2.34
2.44
2.58
2.71
2.12
1.66
1.30
1.06
0.77
—
0.55
0.49
0.44
0.36
0.30
1.13
1.13
1.16
1.17
0.98
0.77
0.64
0.56
0.44
—
0.35
0.27
0.30
0.15
0.21
2.60
2.69
2.83
2.95
2.30
1.83
1.45
1.20
0.89
—
0.65
0.56
0.53
0.39
0.37
0.69
1.26
1.96
2.67
2.58
2.56
2.34
2.37
2.27
—
2.15
2.07
2.33
1.76
2.49
0.77
1.40
2.18
2.98
2.88
2.85
2.59
2.60
2.48
—
2.34
2.28
2.51
1.97
2.69
0.84
1.52
2.39
3.28
3.17
3.11
2.82
2.66
2.50
—
2.50
2.46
2.67
2.17
2.86
0.90
1.64
2.58
3.55
3.44
3.35
3.03
3.01
2.83
—
2.64
2.62
2.80
2.35
3.00
0.95
1.74
2.74
3.78
3.67
3.56
3.20
3.17
2.96
—
2.75
2.76
2.90
2.51
3.11
0.99
1.82
2.87
3.97
3.86
3.72
3.33
3.29
3.05
—
2.82
2.86
2.96
2.63
3.17
1.01
1.86
2.94
4.08
3.98
3.80
3.39
3.32
3.07
—
2.81
2.89
2.93
2.71
3.15
0.91
1.69
2.68
3.76
3.67
3.45
3.04
2.94
2.66
—
2.39
2.54
2.44
2.49
2.63
Notes:
1. For plug-in distributed loads, divide voltage drop
values by 2.
2. To determine voltage drop line-to-neutral, multiply lineto-line values by 0.577.
3. Actual voltage drop for different lengths and at
loadings less than full rated current can be calculated
using the formula:
Vd (actual) = Vd (table) x actual load x actual length (ft)
rated load
100 feet
14-24
Voltage Drop - Concentrated Loads, Line-to-Line per 100 feet at 100%
Rated Load, 35°C Ambient 햸
Power Factor
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
4. For 50 Hz, multiply reactance (X) by 0.85 and resistance
values do not change. For 400 Hz, multiply reactance
by 3.75 and multiply resistance by 1.4. Calculate new
voltage drop:
Vd = amps load x 앀3(Rcos θ + X sin θ) per 100 ft,
where cos θ = Power Factor.
5. For metric conversion R, X, Z values ”in Ohms per
meters Line to Neutral”
R x .0328
X x .0328
Z x .0328
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6. For metric conversion ”Line to Line per meter at 25° C
ambient in mV/A/m” (Vd 32.8) / A Divide Vd by 2 for
distributed loads.
7. Voltage Drop will decrease in lower ambient
temperature. Contact Siemens for Voltage Drop in
other ambient conditions.
Busway Systems
Technical Data
Technical
Ground Capacity
Ampere Rating
A
L-Rated
225
—
400
—
600
—
800
400
1000 600
1200 800
1350 1000
1600 1200
2000 1350,1600
2500 2000
3000 2500
3200 2000
4000 3000,3200
Integral
(Hsg.)
Ground
In2 (mm2)
% of
% of
Internal Ground
UL Req Phase Bar R
X
Z
Housing Ground
R
X
Z
1.75
1.75
1.75
2.38
3.25
4.38
5.38
6.50
8.75
5.63
6.75
7.50
9.00
(44.5)
(44.5)
(44.5)
(60.5)
(82.6)
(111.1)
(136.5)
(165.1)
(222.3)
(142.9)
(171.5)
(190.5)
(228.6)
1
1
1
1
1
1
1
1
1
2
2
2
2
0.08
0.17
0.17
0.17
0.20
0.23
0.29
0.29
0.35
0.52
0.59
0.81
0.81
(53.5)
(107.1)
(107.1)
(107.1)
(126.5)
(146.5)
(189.7)
(189.7)
(227.7)
(332.3)
(380.0)
(522.6)
(522.6)
0.22
0.22
0.22
0.30
0.41
0.55
0.67
0.81
1.09
1.41
1.69
1.88
2.25
(141.1)
(141.1)
(141.1)
(191.9)
(262.1)
(352.8)
(433.5)
(524.2)
(705.6)
(907.3)
(1088.7)
(1209.7)
(1451.6)
2.30
2.30
2.30
2.40
2.54
2.72
2.88
3.06
3.42
3.85
4.20
4.44
4.92
(1485.1)
(1485.1)
(1485.1)
(1550.1)
(1639.9)
(1756.6)
(1859.8)
(1975.4)
(2207.7)
(2480.7)
(2711.9)
(2866.8)
(3176.5)
1333
667
667
688
607
552
446
467
425
320
301
229
250
253
253
253
192
147
115
9
84
69
59
53
51
50
10.267
10.267
10.267
8.063
7.208
6.358
5.561
4.837
3.735
3.169
2.848
2.648
2.446
9.037
9.037
9.037
7.333
6.628
5.852
5.115
4.489
3.467
2.955
2.683
2.493
2.339
4.872
4.872
4.872
3.351
2.833
2.487
2.182
1.801
1.390
1.145
0.954
0.894
0.715
14.200
14.200
14.200
11.150
9.202
7.625
6.478
5.687
4.565
4.129
3.835
3.614
3.500
12.963
12.963
12.963
10.000
8.442
6.926
5.883
5.206
4.267
3.837
3.635
3.428
3.378
5.797
5.797
5.797
4.932
3.662
3.189
2.713
2.289
1.623
1.526
1.221
1.144
0.916
1.75
1.75
1.75
1.75
2.25
2.88
3.50
4.50
6.00
6.50
8.50
4.75
5.50
6.50
8.50
(44.5)
(44.5)
(44.5)
(44.5)
(57.2)
(73.0)
(88.9)
(114.3)
(152.4)
(165.1)
(215.9)
(120.7)
(139.7)
(165.1)
(215.9)
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
0.05
0.11
0.11
0.11
0.13
0.18
0.24
0.24
0.29
0.29
0.35
0.41
0.59
0.59
0.71
(33.5)
(67.7)
(67.7)
(67.7)
(85.2)
(114.2)
(152.3)
(152.3)
(189.7)
(189.7)
(227.7)
(265.8)
(380.0)
(380.0)
(456.1)
0.22
0.22
0.22
0.22
0.28
0.36
0.44
0.56
0.75
0.81
1.06
1.19
1.38
1.63
2.13
(141.1)
(141.1)
(141.1)
(141.1)
(181.5)
(231.9)
(282.3)
(362.9)
(483.9)
(524.2)
(685.5)
(766.1)
(887.1)
(1048.4)
(1371.0)
2.30
2.30
2.30
2.30
2.38
2.48
2.58
2.74
2.98
3.06
3.38
3.56
3.80
4.12
4.76
(1485.1)
(1485.1)
(1485.1)
(1485.1)
(1536.7)
(1601.8)
(1665.8)
(1769.0)
(1923.8)
(1975.4)
(2181.9)
(2290.0)
(2453.9)
(2660.3)
(3073.2)
2128
1054
1054
1054
860
661
510
534
457
467
421
376
277
296
278
261
261
261
261
207
166
140
113
90
84
70
66
60
54
50
7.380
7.380
7.380
7.380
6.715
6.186
5.704
4.719
3.507
4.837
2.294
2.117
1.938
1.688
1.360
6.330
6.330
6.330
6.330
5.993
5.676
5.267
4.323
3.181
4.489
2.020
1.874
1.691
1.500
1.218
3.803
3.803
3.803
3.803
3.029
2.460
2.188
1.893
1.476
1.801
1.087
0.984
0.947
0.773
0.606
11.338
11.338
11.338
11.338
10.194
8.996
8.000
7.411
6.422
5.687
3.072
4.859
4.353
3.334
1.989
10.083
10.083
10.083
10.083
9.191
8.212
7.492
6.880
6.032
5.206
5.419
4.631
4.129
3.060
1.783
5.183
5.183
5.183
5.183
4.409
3.674
2.807
2.756
2.205
2.289
1.764
1.470
1.378
1.323
0.882
Grd. Circuit Characteristics under Fault
Conditions Ohms x 103 per 100 ft
Note: Bus bar thickness = .25 in. (6.4mm), Ground bar thickness = .125 in.(3.18mm)
UL Short Circuit Ratings
Ampere
AL
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
Rating
L-Rated
—
—
—
400
600
800
1000
1200
1350,1600
2000
2500
2000
3000,3200
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
UL Series Connected with Fuse
RMS Symmetrical (kA)
6 cycle
1 sec.
3 sec.
Maximum Fuse Size for 200kA
RMS Symmetrical Rating
Class R
Class J & T
Class L
85
85
85
100
100
125
150
150
150
200
200
200
200
28
28
28
47
50
60
75
90
110
130
160
160
200
16
16
16
27
29
35
43
52
64
75
92
92
115
600
600
600
—
—
—
—
—
—
—
—
—
—
600
600
600
800
—
—
—
—
—
—
—
—
—
J&T
J&T
J&T
T
—
—
—
1200
3000
3000
3000
3000
5000
5000
—
—
—
85
85
85
85
100
100
100
125
150
150
150
200
200
200
200
40
40
40
40
50
65
80
95
115
90
130
175
175
200
200
23
23
23
23
29
38
46
55
66
52
75
101
101
115
115
600
600
600
—
—
—
—
—
—
—
—
—
—
—
—
600
600
600
800
—
—
—
—
—
—
—
—
—
—
—
J&T
J&T
J&T
T
—
—
—
1600
3000
3000
3000
4000
5000
3000
5000
—
—
—
—
Sentron Busway has UL
approved Series Ratings. By
using the appropriate line side
fuse, short circuit ratings can be
enhanced to 200kA for lower
amperage busway.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-25
BUSWAY
SYSTEMS
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Sectional
Area 50%
Internal
Ground Bar
In2 (mm2)
14
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Effective Current
Carrying Capacity
of Housing
Min. CSA for
Ground Bus
Bus Bar
Bars per UL 857
Width
per Table 14
Inches (mm) Pole In2 (mm2)
Busway Systems
Straight Sections—Plug-In, Riser and Feeder
Straight Sections
Sentron Busway can be ordered with
Aluminum or Copper bus bars.
Aluminum bars are available in 225-4000
ampere sections. Copper bars are
available in 225-5000 ampere sections.
Sentron Busway includes an integral
housing ground, and is available with an
internal ground bar or an isolated ground
bar in all ampere ratings. Sentron
Busway housing is a four-piece
aluminum design.
BUSWAY
SYSTEMS
14
Plug-In Sections
Sentron plug-in sections are designed
with plug-in openings centered on 24 in.
(610mm) intervals, and are located on
both sides of the busway for optimum
utilization. Plug-in sections are available
in standard lengths of 4 ft. (1.22m), 6 ft.
(1.83m), 8 ft. (2.44m) and 10 ft. (3.05m).
Sentron plug-in sections meet IP40
(indoor) and IP55 (splash proof)
requirements. One joint stack assembly
is provided with each plug-in section.
Riser Sections
Sentron Riser sections are designed
with plug-in openings centered on 24 in.
(610mm) intervals on one side of the
busway only. This eliminates unusable
plug-in outlets in vertical applications.
Riser busway is available in standard
lengths of 4 ft. (1.22m), 6 ft. (1.83m), 8
ft. (2.44m) and 10 ft. (3.05m). Sentron
Riser Busway is available in IP40 (indoor)
and IP55 (splash proof). One joint stack
assembly is provided with each riser
section.
Plug-In Outlet Features
The plug-in outlet molded guard design
prevents incidental finger contact with
live conductors. Sentron plug-in outlets
Standard Plug-In Section (Standard plug-in outlets on both sides on 24 in. centers)
Suffix PL04 (4 ft.), PL06 (6 ft.), PL08 (8 ft.), PL10 (10 ft.)
Standard Riser Section (Standard Plug-In outlets on one side on 24 in. centers)
Suffix RI04 (4 ft.), RI06 (6 ft.), RI08 (8 ft.), RI10 (10 ft.)
Standard Feeder Section
Suffix F024 - 120 (last 3 digits = length in Inches, 024=24 in., 120=120 in.)
14-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Selection
are IP 2X rated (with the outlet cover
open) which means a .472 in. (12mm) or
larger probe is unable to enter a plug-in
outlet. The outlet is IP40 Rated with the
cover closed and IP55 Rated when
configured with gaskets.
Feeder Sections
Feeder busway carries the current of the
busway system from the supply source.
Feeder busway does not have plug-in
outlets. Sentron Feeder busway is
available in custom lengths from 2 ft.
(.61m) to 10 ft. (3.05m). Feeder sections
are rated as IP40 (Indoor), IP55 (Splash
Proof), NEMA 3R (Outdoor), and IP66
(Severe Outdoor). One joint stack
assembly is provided with each feeder
section.
Busway Systems
Selection
Sentron Busway, Widths and Weights
Approximate Weight - lbs per ft. (kg per meter)
Dimension
Inches (mm)
3Ø, 3-Wire
3Ø, 3-Wire
with Internal
Ground
3Ø, 4-Wire
3Ø, 4-Wire
with Internal
Ground
3Ø, 4-Wire
200%
Neutral
3Ø, 4-Wire
200% Neutral
with Internal
Ground
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W2”
“W2”
“W2”
“W2”
3.9
3.9
3.9
4.6
5.4
6.6
7.6
8.7
10.9
13.7
15.8
17.3
20.3
(99)
(99)
(99)
(117)
(137)
(168)
(193)
(221)
(277)
(348)
(402)
(439)
(516)
5 (8)
5 (8)
5 (8)
6 (9)
7 (10)
8 (12)
9 (13)
10 (15)
13 (19)
15 (22)
17 (25)
18 (27)
22 (33)
5 (8)
5 (8)
5 (8)
6 (9)
7 (11)
9 (13)
10 (15)
11 (17)
14 (21)
17 (25)
19 (28)
20 (30)
25 (37)
6 (9)
6 (9)
6 (9)
7 (10)
8 (12)
9 (14)
11 (16)
12 (18)
15 (23)
8 (27)
21 (31)
23 (34)
27 (40)
6 (9)
6 (9)
6 (9)
7 (10)
8 (12)
10 (15)
11 (17)
13 (19)
16 (24)
20 (30)
23 (34)
25 (37)
30 (44)
7 (10)
7 (10)
7 (10)
7 (11)
9 (13)
11 (16)
12 (18)
14 (21)
18 (26)
22 (33)
25 (37)
27 (40)
32 (48)
7 (10)
7 (10)
7 (10)
8 (11)
9 (14)
11 (17)
13 (19)
15 (22)
19 (28)
23 (34)
27 (40)
29 (43)
35 (52)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W1”
“W2”
“W2”
“W2”
“W2”
3.9
3.9
3.9
3.9
4.4
5.1
5.7
6.7
8.2
10.9
10.7
11.8
13.3
15.3
19.3
(99)
(99)
(99)
(99)
(112)
(130)
(145)
(170)
(208)
(277)
(272)
(300)
(335)
(389)
(491)
9 (13)
9 (13)
9 (13)
9 (13)
10 (15)
12 (18)
14 (21)
17 (26)
22 (32)
13 (19)
30 (44)
33 (49)
37 (55)
43 (64)
56 (83)
10 (14)
10 (14)
10 (14)
10 (14)
11 (17)
14 (20)
16 (24)
19 (29)
25 (37)
14 (21)
34 (50)
37 (55)
2 (63)
50 (75)
4 (95)
10 (16)
10 (16)
10 (16)
10 (16)
12 (19)
15 (23)
17 (26)
22 (32)
28 (41)
5 (23)
38 (56)
42 (63)
48 (72)
56 (83)
72 (107)
11
11
11
11
14
16
19
24
30
16
42
47
53
62
80
12
12
12
12
15
18
21
26
33
18
46
51
58
68
89
13
13
13
13
16
19
23
28
36
19
50
56
64
75
97
(17)
(17)
(17)
(17)
(20)
(24)
(29)
(35)
(45)
(24)
(62)
(70)
(79)
(92)
(119)
(18)
(18)
(18)
(18)
(22)
(26)
(31)
(38)
(50)
(26)
(68)
(76)
(86)
(101)
(132)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
(19)
(19)
(19)
(19)
(23)
(29)
(34)
(42)
(54)
(28)
(74)
(83)
(95)
(112)
(145)
14-27
BUSWAY
SYSTEMS
Rating
L-Rated
—
—
—
400
600
800
1000
1200
1250,1600
2000
2500
2000
3000,3200
14
Ampere
AL
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
Busway Systems
Elbows
Selection
Sentron Busway elbows provide a simple, convenient
method of changing the direction (left, right, up or
down) of a busway run. Two elbow styles are offered:
elbow stack and elbow section.
BUSWAY
SYSTEMS
14
Flatwise Elbow Stacks, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
AL
L-Rated
225
—
1.00 (25)
400
—
1.00 (25)
600
—
1.00 (25)
800
400
1.12 (28
1000
600
2.00 (51)
1200
800
2.50 (64)
1350
1000
3.00 (76)
1600
1200
3.50 (89)
2000
1350,1600
4.62 (117)
2500
2000
5.75 (146)
3000
2500
7.00 (178)
3200
2000
7.75 (197)
4000
3000,3200
9.35 (237)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
1.00
1.00
1.00
1.00
1.12
.25
2.00
2.50
3.25
4.62
4.50
5.00
5.75
6.75
8.87
Flatwise Elbow Stacks
Flatwise elbow stacks are used for left and right directional
changes. When the busway system is mounted flatwise in the
horizontal plane (bus bars run parallel to the floor).
Flat
Suffix ESFR/ESFL
(25)
(25)
(25)
(25)
(28)
(33)
(50)
(64)
(83)
(117)
(114)
(127)
(146)
(171)
(225)
Note: Flatwise elbow stacks can be ordered as either right-hand (ESFR) or lefthand (ESFL) to follow the same nomen-clature as an elbow section. The
construction is identical and interchangeable.
Edgewise Elbow Stacks, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
AL
L-Rated
225
—
4.25 (108)
400
—
4.25 (108)
600
—
4.25 (108)
800
400
4.25 (108)
1000
600
4.25 (108)
1200
800
4.25 (108)
1350
1000
4.25 (108)
1600
1200
4.25 (108)
2000
1350,1600
4.25 (108)
2500
2000
4.25 (108)
3000
2500
4.25 (108)
3200
2000
4.25 (108)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
(108)
Edgewise Elbow Stacks
Edgewise elbow stacks create up and down directional changes.
The “A” phase is on the inside of the bend for edge up elbow
stacks. The “A” phase is on the outside of the bend for edge down
elbow stacks.
Edge Down
Edge Up
Suffix ESED
Suffix ESEU
Note: Edge up and edge down elbow stacks are not interchangeable.
14-28
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Elbows
Selection
Flatwise Elbow Sections, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
”B”
AL
L-Rated
225
—
12 (305)
12 (305)
400
—
12 (305)
12 (305)
600
—
12 (305)
12 (305)
800
400
12 (305)
12 (305)
1000
600
12(305)
12 (305)
1200
800
12 (305)
12 (305)
1350
1000
12 (305)
12 (305)
1600
1200
18 (457)
18 (457)
2000
1350,1600
18 (457)
18 (457)
2500
2000
18 (457)
18 (457)
3000
2500
18 (457)
18 (457)
3200
2000
18 (457)
18 (457)
4000
3000,3200
24 (610)
24 (610)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
Edgewise Elbow Sections, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
”B”
AL
L-Rated
225
—
10 (254)
10 (254)
400
—
10 (254)
10 (254)
600
—
10 (254)
10 (254)
800
400
10 (254)
10 (254)
1000
600
10 (254)
10 (254)
1200
800
10 (254)
10 (254)
1350
1000
10 (254)
10 (254)
1600
1200
10 (254)
10 (254)
2000
1350,1600
10 (254)
10 (254)
2500
2000
10 (254)
10 (254)
3000
2500
10 (254)
10 (254)
3200
2000
10 (254)
10 (254)
4000
3000,3200
10 (254)
10 (254)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Flat Left
Suffix ELEF
Flat Right
Suffix ELFR
BUSWAY
SYSTEMS
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Flatwise elbow sections are used for left and right directional
changes when the busway system is mounted in the horizontal plane
(bus bars run parallel to the floor). The joint stack assembly may be
moved to the opposite leg to change the orientation from left to
right/right to left.
14
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Flatwise Elbow Sections
Edgewise Elbow Sections
Edgewise elbow sections create up and down directional changes.
The “A”phase bus bar lies on the inside of the bend for edge up
elbows. The “A” phase bus bar lies on the outside of the bend for
edge down elbows. The joint stack assembly on edgewise elbows
can not be moved in order to change orientation from up to
down/down to up. Sentron Busway elbow sections are shipped with
a joint stack assembly on one end for direct connection to the
busway system.
Edge Up
Edge Down
Suffix ELEU
Suffix ELED
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
Note : Odd angle elbow flatwise and edgewise elbow sections are available
for angles 95° - 175° in 5° increments.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-29
Busway Systems
Offsets
Selection
BUSWAY
SYSTEMS
14
Offsets can be utilized to solve difficult contour
problems and save space. In applications where space
does not allow for two connected elbows, a single
offset can bypass an obstruction. All offsets are
supplied with one joint stack assembly.
Flatwise Offsets, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
*“A”
”B”
”C”
AL
L-Rated
225
—
12 (305)
5 (127)
12 (305)
400
—
12 (305)
5 (127)
12 (305)
600
—
12 (305)
5 (127)
12 (305)
800
400
12 (305)
5 (127)
12 (305)
1000
600
12 (305)
5 (127)
12 (305)
1200
800
12 (305)
5 (127)
12 (305)
1350
1000
12 (305)
5 (127)
12 (305)
1600
1200
18 (457)
5 (127)
18 (457)
2000
1350,1600
18 (457)
5 (127)
18 (457)
2500
2000
18 (457)
5 (127)
18 (457)
3000
2500
18 (457)
5 (127)
18 (457)
3200
2000
18 (457)
5 (127)
18 (457)
4000
3000,3200
24 (610)
8 (203)
24 (610)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
12
12
12
12
12
12
12
12
12
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
5
5
5
5
5
5
5
5
5
(127)
(127)
(127)
(127)
(127)
(127)
(127)
(127)
(127)
12
12
12
12
12
12
12
12
12
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
18
18
18
18
24
(457)
(457)
(457)
(457)
(610)
5
5
5
5
8
(127)
(127)
(127)
(127)
(203)
18
18
18
18
24
(457)
(457)
(457)
(457)
(610)
Edgewise Offsets, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
*“A”
”B”
”C”
AL
L-Rated
225
—
10 (254)
6 (152)
10 (254)
400
—
10 (254)
6 (152)
10 (254)
600
—
10 (254)
6 (152)
10 (254)
800
400
10 (254)
6 (152)
10 (254)
1000
600
10 (254)
6 (152)
10 (254)
1200
800
10 (254)
6 (152)
10 (254)
1350
1000
10 (254)
6 (152)
10 (254)
1600
1200
10 (254)
6 (152)
10 (254)
2000
1350,1600
10 (254)
6 (152)
10 (254)
2500
2000
10 (254)
6 (152)
10 (254)
3000
2500
10 (254)
6 (152)
10 (254)
3200
2000
10 (254)
6 (152)
10 (254)
4000
3000,3200
10 (254)
6 (152)
10 (254)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
(152)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
Flat Right
Suffix OFFR
Flat Left
Suffix OFFL
Edge Up
Suffix OFEU
Edge Down
Suffix OFED
*Note: Leg Dimensions A and C have been reversed from prior publications.
14-30
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Combinations
Selection
Combinations are used to create edge to flat and flat
to edge changes in the busway run. One joint stack
assembly is shipped with combination.
Flat Right - Edge Up
Flat Left - Edge Up
Suffix CORU
Suffix COLU
Edge Up - Flat Left
Edge Up - Flat Right
Suffix COUL
Suffix COUR
Flat Right - Edge Down
Flat Left - Edge Down
Suffix CORD
Suffix COLD
See drawings for minimum dimensions. Consult
Busway Order Service for information on custom
lengths.
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
8 (203)
8 (203)
8 (203)
8 (203)
8 (203)
8 (203)
8 (203)
8 (203)
8 (203)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
16 (406)
12
12
12
12
12
12
12
12
12
18
18
18
18
18
24
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(457)
(457)
(457)
(457)
(457)
(610)
BUSWAY
SYSTEMS
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
14
Combinations, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
*“A”
”B”
”C”
AL
L-Rated
225
—
10 (254)
8 (203)
12 (305)
400
—
10 (254)
8 (203)
12 (305)
600
—
10 (254)
8 (203)
12 (305)
800
400
10 (254)
8 (203)
12 (305)
1000
600
10 (254)
8 (203)
12 (305)
1200
800
10 (254)
8 (203)
12 (305)
1350
1000
10 (254)
8 (203)
12 (305)
1600
1200
10 (254)
12 (305)
18 (457)
2000
1350,1600
10 (254)
12 (305)
18 (457)
2500
2000
10 (254)
12 (305)
18 (457)
3000
2500
10 (254)
12 (305)
18 (457)
3200
2000
10 (254)
12 (305)
18 (457)
4000
3000,3200
10 (254)
16 (406)
24 (610)
*Note: Leg Dimensions A and C have been reversed from prior publications.
Edge Down - Flat Left
Edge Down - Flat Right
Suffix CODL
Suffix CODR
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-31
Busway Systems
Tees
Selection
BUSWAY
SYSTEMS
14
Tees are used to simplify directional and plane
orientation changes in a busway system. Tees can
make 90° bends left or right, and up and down along
the busway run. All tees are supplied with two joint
stack assemblies.
Flatwise Tees, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”, ”B”, ”C”
AL
L-Rated
225
—
12 (305)
400
—
12 (305)
600
—
12 (305)
800
400
12 (305)
1000
600
12 (305)
1200
800
12 (305)
1350
1000
12 (305)
1600
1200
18 (457)
2000
1350,1600
18 (457)
2500
2000
18 (457)
3000
2500
18 (457)
3200
2000
18 (457)
4000
3000,3200
24 (610)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
12
12
12
12
12
12
12
12
12
18
18
18
18
18
24
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(457)
(457)
(457)
(457)
(457)
(610)
Edgewise Tees, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“D”
AL
L-Rated
225
—
13 (330)
400
—
13 (330)
600
—
13 (330)
800
400
13 (330)
1000
600
13 (330)
1200
800
18 (457)
1350
1000
18 (457)
1600
1200
18 (457)
2000
1350,1600
18 (457)
2500
2000
27 (686)
3000
2500
27 (686)
3200
2000
27 (686)
4000
3000,3200
29 (737)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
12.0"
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Flatwise Tees
Flatwise tees are used to create left and right branches.
Flat Right
Suffix TEFR
Flat Left
Suffix TEFL
Edgewise Tees
Edgewise tees are used to create branches that stem up or down
from the busway run.
Edge Up
Edge Down
Suffix TEEU
Suffix TEED
13
13
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
(305mm) For Isolated Ground.
14-32
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
End Tap Boxes
Selection
End tap boxes are non-fusible devices used to connect cable and conduit to the end of a
busway run or where busway runs connect without the need for over-current protection. End
tap boxes may be installed at the end or beginning of a run. Vertical end tap boxes and
horizontal end tap boxes can be installed in both horizontal and vertical applications. Extended
end tap boxes are available if the application requires additional wire bending space. One joint
stack assembly is shipped with each end tap box.
Horizontal End Tap Box
Standard and Extended Horizontal End Tap Boxes, Dimensions
Cable Lugs
Per Phase & Neutral
Qty.
Size
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
30
30
30
30
30
32
33
33
33
33
33
33
33
(762)
(762)
(762)
(762)
(762)
(813)
(838)
(838)
(838)
(838)
(838)
(838)
(838)
34
34
34
34
34
37
37
37
37
37
37
37
37
(863)
(863)
(863)
(863)
(863)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
17
17
17
17
17
20
20
20
20
20
20
20
20
(432)
(432)
(432)
(432)
(432)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
21
21
21
21
21
24
24
24
24
24
24
24
24
(533)
(533)
(533)
(533)
(533)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
1
1
2
3
4
4
4
6
6
8
9
9
12
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
13
13
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
30
30
30
30
30
33
33
33
33
33
33
33
33
33
33
(762)
(762)
(762)
(762)
(762)
(838)
(838)
(838)
(838)
(838)
(838)
(838)
(838)
(838)
(838)
34
34
34
34
34
37
37
37
37
37
37
37
37
37
37
(863)
(863)
(863)
(863)
(863)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
17
17
17
17
17
20
20
20
20
20
20
20
20
20
20
(432)
(432)
(432)
(432)
(432)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
21
21
21
21
21
24
24
24
24
24
24
24
24
24
24
(533)
(533)
(533)
(533)
(533)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
1
1
2
3
4
4
4
5
6
5
8
9
9
12
15
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Ground
Lugs
1
1
1
1
1
1
1
2
2
2
2
2
3
1
1
1
1
1
1
1
1
2
1
2
2
2
3
4
Vertical End Tap Box
Standard and Extended Vertical End Tap Boxes, Dimensions
Cable Lugs
Per Phase & Neutral
Qty.
Size
Ampere Rating
AL
L-Rated
225
—
400
—
600
—
800
400
1000 600
1200 800
1350 1000
1600 1200
2000 1350,1600
2500 2000
3000 2500
3200 2000
4000 3000,3200
Dimensions Inches (mm)
"A"
"B" Std. "B" Ext.
Wire Bend Space
"C" Std. "C" Ext.
13
13
13
13
13
18
18
18
18
27
27
29
29
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(737)
(737)
25
25
25
25
25
32
28
28
28
28
28
28
28
(635)
(635)
(635)
(635)
(635)
(813)
(711)
(711)
(711)
(711)
(711)
(711)
(711)
29
29
29
29
29
32
32
32
32
32
32
32
32
(737)
(737)
(737)
(737)
(737)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
17
17
17
17
17
20
20
20
20
20
20
20
20
(432)
(432)
(432)
(432)
(432)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
21
21
21
21
21
24
24
24
24
24
24
24
24
(533)
(533)
(533)
(533)
(533)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
1
1
2
3
4
4
4
6
6
8
9
9
12
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
13
13
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
25
25
25
25
25
28
28
28
28
28
28
28
28
28
28
(635)
(635)
(635)
(635)
(635)
(711)
(711)
(711)
(711)
(711)
(711)
(711)
(711)
(711)
(711)
29
29
29
29
29
32
32
32
32
32
32
32
32
32
32
(737)
(737)
(737)
(737)
(737)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
17
17
17
17
17
20
20
20
20
20
20
20
20
20
20
(432)
(432)
(432)
(432)
(432)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
21
21
21
21
21
24
24
24
24
24
24
24
24
24
24
(533)
(533)
(533)
(533)
(533)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
1
1
2
3
4
4
4
5
6
5
8
9
9
12
15
#6
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
AWG -350 kcmil, Cu/AI.
Suffix ETHS (Standard)
Suffix ETHX (Extended)
BUSWAY
SYSTEMS
Wire Bend Space
"C" Std. "C" Ext.
14
Ampere Rating
AL
L-Rated
225
—
400
—
600
—
800
400
1000 600
1200 800
1350 1000
1600 1200
2000 1350,1600
2500 2000
3000 2500
3200 2000
4000 3000,3200
Dimensions Inches (mm)
"A"
"B" Std. "B" Ext.
#4 AWG -600 kcmil, Cu/AI.
Ground
Lugs
Suffix ETVS (Standard)
Suffix ETVX (Extended)
1
1
1
1
1
1
1
2
2
2
2
2
3
1
1
1
1
1
1
1
1
2
1
2
2
2
3
4
24.0"
(610mm) for isolated ground.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-33
Busway Systems
Center Tap Boxes
Selection
Center tap boxes are non-fusible devices utilized to feed to or take off power from the busway
run. When loads served by the busway run do not require over-current protection, center tap
boxes may be used. If the application requires additional wiring bending space, extended
center tap boxes are available. One joint stack assembly is provided with each center tap box.
BUSWAY
SYSTEMS
14
Standard and Extended Center End Tap Boxes, Dimensions
Ampere Rating
AL
L-Rated
225
—
225
—
400
—
600
—
800
400
1000 600
1200 800
1350 1000
1600 1200
2000 1350,1600
2500 2000
3000 2500
3200 2000
4000 3000,3200
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,
3200
4000
Dimensions Inches (mm)
"A"Std.
"B"
"D"
Wire Bend Space
"A" Ext.. "C" Std.
"C" Ext.
Cable Lugs
Per Phase &
Neutral
Qty.
Size
25
25
25
25
25
25
29
29
33
33
37
37
37
45
(635)
(635)
(635)
(635)
(635)
(635)
(737)
(737)
(838)
(838)
(940)
(940)
(940)
(1143)
16
16
16
16
16
16
16
16
20
20
24
24
24
28
(406) 3.9
(406) 3.9
(406) 3.9
(406) 3.9
(406) 4.2
(406) 4.6
(406) 5.2
(406) 5.7
(508) 6.3
(508) 7.4
(610) 8.7
(610) 9.7
(610) 9.7
(711) 11.9
(99)
(99)
(99)
(99)
(107)
(117)
(132)
(145)
(160)
(188)
(221)
(246)
(246)
(302)
29
29
29
29
29
29
33
33
37
37
41
41
41
49
(737)
(737)
(737)
(737)
(737)
(737)
(838)
(838)
(940)
(940)
(1041)
(1041)
(1041)
(1245)
17
17
17
17
17
17
20
20
20
20
20
20
20
20
(432)
(432)
(432)
(432)
(432)
(432)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
(508)
21
21
21
21
21
21
24
24
24
24
24
24
24
24
(533)
(533)
(533)
(533)
(533)
(533)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
1
1
1
2
3
4
4
4
5
6
8
9
9
12
25
25
25
25
25
29
29
29
29
33
33
33
33
(635)
(635)
(635)
(635)
(635)
(737)
(737)
(737)
(737)
(838)
(838)
(838)
(838)
30
30
30
30
30
33
33
20
20
20
24
24
24
(762)
(762)
(762)
(762)
(762)
(838)
(838)
(508)
(508)
(508)
(610)
(610)
(610)
(99)
(99)
(99)
(107)
(107)
(114)
(122)
(135)
(155)
(160)
(185)
(201)
(201)
29
29
29
29
29
33
33
33
33
37
37
37
37
(737)
(737)
(737)
(737)
(737)
(838)
(838)
(838)
(838)
(940)
(940)
(940)
(940)
17
17
17
17
18
22
21
21
20
20
23
20
20
(432)
(432)
(432)
(432)
(457)
(559)
(533)
(533)
(508)
(508)
(584)
(508)
(508)
21
21
21
21
22
26
25
25
24
24
17
24
24
(533)
(533)
(533)
(533)
(559)
(660)
(635)
(635)
(610)
(610)
(432)
(610)
(610)
1
1
2
3
4
4
4
5
6
5
8
9
9
12
15
37 (940)
40(1016)
3.9
3.9
3.9
4.2
4.2
4.5
4.8
5.3
6.1
6.3
7.3
7.9
7.9
28 (711) 9.4 (239)
34 (863) 11.7(297)
41 (1041)
44 (1118)
20 (508)
19 (483)
24 (610)
23 (584)
Center Tap Box
Suffix CTBS (Standard)
Suffix CTBX (Extended)
#6
AWG -350 kcmil, Cu/AI.
#4 AWG -600 kcmil, Cu/AI.
24.0" (610mm) for isolated ground.
14-34
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Ground
Lugs
1
1
1
1
1
1
1
1
1
2
2
2
2
3
1
1
1
1
1
1
1
1
2
1
2
2
2
3
4
Busway Systems
In-Line Disconnect Cubicles and Expansion Fittings
In-Line Disconnect Cubicles
In-Line Disconnect Cubicle, Dimensions
Description
of Unit
Type of Disconnect
Fusible Switch
Selection
Dimensions Inches (mm)
“A”
“B”
“C”
400-600A FK Visible Blade
800-1200A Vacu-Break
JD6, LD6, MD6, ND6
PD6, RD6
SJD6, SLD6, SMD6, SND6
SPD6 1600A Frame
36
36
36
36
36
36
Molded Case
Circuit Breaker
Digital Sentron
Series MCCB's
Power
200-5000A WL
Circuit Breaker
Bolted Pressure 800A
Switch
1200-2500A
3000A
4000A
ACCESScompatible
(914)
(914)
(914)
(914)
(914)
(914)
28
36
28
36
28
36
(711)
(914)
(711)
(914)
(711)
(914)
28
32
28
32
28
32
(711)
(813)
(711)
(813)
(711)
(813)
48 (1219)
36 (914)
32 (813)
33
37
37
41
36
40
40
40
32
32
48
48
(838)
(940)
(940)
(1041)
(914)
(1016)
(1016)
(1016)
(813)
(813)
(1219)
(1219)
Cubicles provide a means of mounting switches
or circuit breakers where power feeds to or
pulls from the busway system. When bolted
connections are preferred, cubicles may be
used in place of plug-in units. Cubicles can also
be used at ampere ratings that exceed standard
plug-in unit ratings. Modifications to cubicles
can be made in order to accommodate key
inter-locks, ground fault detector systems and
power monitoring systems.
In-Line Disconnect Cubicle
Note: Consult your local Siemens sales office for details on WL breakers.
14
BUSWAY
SYSTEMS
Horizontal
Vertical
Expansion Fittings, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
AL
L-Rated
225
—
13 (330)
400
—
13 (330)
600
—
13 (330)
800
400
13 (330)
1000
600
13 (330)
1200
800
18 (457)
1350
1000
18 (457)
1600
1200
18 (457)
2000
1350,1600
18 (457)
2500
2000
23 (584)
3000
2500
23 (584)
3200
2000
23 (584)
4000
3000,3200
25 (635)
Expansion Fittings
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Expansion Fitting
Suffix XPFT
24.0"
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
13
13
13
13
13
13
13
18
18
18
18
23
23
23
25
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(584)
(584)
(584)
(635)
Expansion fittings accommodate for expansion
and contraction of a busway run and building
movement. Expansion fittings typically are
installed in the center of long busway runs, and
at the beginning of riser runs to minimize stress
on the lower most device or where a busway
run crosses an expansion joint of a building.
Expansion Fittings are recommended when the
run exceeds 200 ft. (608m). Expansion fittings
allow for a +/- 2 in. (50.8mm) movement along
the length of the busway system.
(610mm) for isolated ground.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-35
Busway Systems
Reducers and Phase Rotation Fittings
BUSWAY
SYSTEMS
14
Fused Reducers, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
AL
L-Rated
225
—
11.4 (289)
400
—
11.4 (289)
600
—
11.4 (289)
800
400
11.4 (289)
1000
600
11.4 (289)
1200
800
12.5 (318)
1350
1000
13.5 (343)
1600
1200
14.6 (372)
2000
1350,1600
16.9 (429)
2500
2000
19.6 (498)
3000
2500
21.3 (541)
3200
2000
22.9 (582)
4000
3000,3200
31.5 (800)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10.4
10.4
10.4
10.4
10.4
11.0
11.6
12.6
14.1
14.6
16.6
17.9
18.9
20.9
31.5
(264)
(264)
(264)
(264)
(264)
(280)
(296)
(321)
(359)
(372)
(423)
(455)
(480)
(531)
(800)
Phase Rotation Fittings, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
“A”
AL
L-Rated
225
—
7.9 (200)
400
—
7.9 (200)
600
—
7.9 (200)
800
400
8.5 (216)
1000
600
9.4 (239)
1200
800
10.5 (267)
1350
1000
11.5 (293)
1600
1200
12.6 (321)
2000
1350,1600
14.9 (376)
2500
2000
17.6 (447)
3000
2500
19.8 (503)
3200
2000
21.3 (541)
4000
3000,3200
24.3 (617)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
14-36
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Selection
Fused Reducers
The National Electric Code requires over current protection when
busway systems are reduced in ampacity. A fused reducer is used to
reduce the allowable ampere rating in those sections of the busway
that do not require a higher rating (i.e. at branch circuit junctures).
Fused Reducer
Suffix RFRF
Non-Fused Reducers
Non-fused reducers are used in conjunction with the following
exception to the Fused Reducer in the National Electric Code: “For
industrial establishments only,omission of over current protection
shall be permitted at points where busways are reduced in ampacity,
provided that the length of the busway having the smaller ampacity
does not exceed 50 ft. and has an ampacity of at least equal to onethird the rating or setting of the over current device next back on the
line, and provided that such busway is free from contact with
combustible material.” Special joint stack connections are provided
for non-fused reducer connections. Consult factory for specific design
guidelines.
Phase-Rotation Fittings
Phase-rotation fittings can be used when the application requires a
phase rotation in the power supply. Phase rotation fittings can be
ordered for “phase and ground”, “phase only” and “ground only”
rotations.
Phase Rotation Fitting
Suffix TRPG, Phase and Ground
TRPO, Phase Only
TRGO, Ground Only
7.9 (200)
7.9 (200)
7.9 (200)
7.9 (200)
8.4 (213)
9.0 (229)
9.6 (245)
10.6 (270)
12.1 (372)
12.6 (321)
14.6 (200)
15.8 (402)
17.3 (439)
19.3 (490)
23.3 (592)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Phase Rotation Examples
Busway Systems
Service Heads
Selection
Service Heads are used to connect busway to a service entrance. In the Sentron Busway line, 3 single-phase service heads and
3-phase service head connections are available. The standard service entrance connection is the 3-phase service head which
consists of one service head for all three phases. 3 single-phase service heads consist of three heads – one for each phase and
may be used to meet the requirements of certain applications. To ensure ease of installation of incoming cables, both types of
Sentron service heads are constructed so that the lugs face the Glastic bottom of the box. The Glastic bottom provides
insulation and protection to the incoming cables.
Three Single-Phase Service Heads
Suffix V1TX
Single-Phase Service Heads, Dimensions (standard/min.)
13
13
13
13
13
18
18
18
20
27
29
29
29
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(508)
(686)
(737)
(737)
(737)
1
1
2
3
4
4
4
5
6
8
9
9
12
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
13
13
13
13
13
13
13
18
20
18
20
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(508)
(457)
(508)
(686)
(686)
(686)
(737)
1
1
2
3
4
4
4
5
6
5
8
9
9
12
15
Ground
Lugs
1
1
1
1
1
1
1
1
2
2
2
2
3
M-Rated
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
1
1
1
1
1
1
1
1
2
1
2
2
2
3
4
Three-Phase Service Head
Suffix V3TX
Three-Phase Service Heads, Dimensions (standard/min.)
Ampere Rating
AL
L-Rated
225
400
225
600
—
800
400
1000
600
1200
800
1350
1000
1600
1200
2000
1350,1600
2500
2000
3000
2500
3200
2000
4000
3000,3200
Dimensions Inches (mm)
Three-Phase “B”
Cable Lugs per
Phase and Neutral
Qty.
Size
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
1
1
2
3
4
4
4
5
6
8
9
9
12
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
13
13
13
13
13
13
13
18
18
18
18
27
27
27
29
(330)
(330)
(330)
(330)
(330)
(330)
(330)
(457)
(457)
(457)
(457)
(686)
(686)
(686)
(737)
1
1
2
3
4
4
4
5
6
5
8
9
9
12
15
#6
BUSWAY
SYSTEMS
Dimensions Inches (mm)
Single-Phase “A”
14
Ampere Rating
AL
L-Rated
225
400
225
600
—
800
400
1000
600
1200
800
1350
1000
1600
1200
2000
1350,1600
2500
2000
3000
2500
3200
2000
4000
3000,3200
Cable Lugs per
Phase and Neutral
Qty.
Size
Ground
Lugs
1
1
1
1
1
1
1
1
2
2
2
2
3
M-Rated
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
AWG - 350 kcmil, Cu / Al.
#4
1
1
1
1
1
1
1
1
2
1
2
2
2
3
4
AWG - 600 kcmil, Cu / Al.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-37
Busway Systems
Hangers
Selection
Trapeze Hanger
A complete offering of hangers is available to
support Sentron Busway in both vertical and
horizontal applications. Standard trapeze hangers
support Sentron Busway in horizontal applications on
10 ft. (3.05m) centers. Additional hangers may be
used if structural requirements mandate their use.
The contractor must supply drop rods to complete
assembly for trapeze hangers.
BUSWAY
SYSTEMS
14
Trapeze Hanger, Dimensions and Catalog Numbers
“A” Dimensions
Flat Mounted
Ampere Rating
Inches (mm)
Catalog Number햲
AL
L-Rated
225
—
10.0 (254)
SXTH1
400
—
10.0 (254)
SXTH1
600
—
10.0 (254)
SXTH1
800
400
10.0 (254)
SXTH1
1000
600
10.0 (254)
SXTH1
1200
800
10.0 (254)
SXTH1
1350
1000
13.5 (343)
SXTH2
1600
1200
13.5 (343)
SXTH2
2000
1350,1600
13.5 (343)
SXTH2
2500
2000
13.5 (343)
SXTH3
3000
2500
13.5 (343)
SXTH3
3200
2000
13.5 (343)
SXTH3
4000
3000,3200
23.0 (584)
SXTH4
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
햲
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
13.5
13.5
13.5
18.5
18.5
18.5
23.0
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(343)
(343)
(343)
(470)
(470)
(470)
(584)
SXTH1
SXTH1
SXTH1
SXTH1
SXTH1
SXTH1
SXTH1
SXTH1
SXTH2
SXTH2
SXTH2
SXTH3
SXTH3
SXTH3
SXTH4
Use SXTH1 for Edge Mounted.
Flat Mounted
Spring Hanger, Catalog Numbers
Catalog Assembly floor
Ampere Rating
10ft.
12 ft.
AL
L-Rated
225
—
SXSH4
SXSH4
400
—
SXSH4
SXSH4
600
—
SXSH4
SXSH4
800
400
SXSH4
SXSH4
1000
600
SXSH4
SXSH4
1200
800
SXSH4
SXSH4
1350
1000
SXSH4
SXSH4
1600
1200
SXSH4
SXSH4
2000
1350,1600
SXSH4
SXSH4
2500
2000
SXSH4
SXSH4
3000
2500
SXSH4
SXSH6
3200
2000
SXSH4
SXSH6
4000
3000,3200
SXSH4
SXSH6
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH4
SXSH2
SXSH6
SXSH6
SXSH6
SXSH6
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH4
SXSH6
SXSH8
SXSH8
SXSH8
SXSH10
to ceiling height
14 ft.
16 ft.
18 ft.
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH6
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH6
SXSH6
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH6
SXSH8
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH4
SXSH8
SXSH8
SXSH8
SXSH10
SXSH12
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH6
SXSH4
SXSH8
SXSH10
SXSH10
SXSH12
SXSH14
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH4
SXSH6
SXSH6
SXSH8
SXSH4
SXSH8
SXSH10
SXSH12
SXSH12
SXSH14
Edge Mounted
Spring Hanger
Spring hangers and floor support hangers must be
used to provide secure mounting of the busway run
in vertical applications. Spring hangers support the
weight of the busway on each floor and also
compensate for minimal building movement and
thermal expansion. Maximum distance between
spring hangers may not exceed 16 ft. (4.88m). When
ordering 18 ft. (5.49m) floor to ceiling height
assemblies, intermediate support hangers are
necessary.
*
*Note: Flanges do not offer support to the busway. Flanges provide a
means of covering the hole created in the existing structure.
14-38
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Hangers
Selection
Structural Steel Hanger, Dimensions and Catalog Numbers
“A” Dimensions
Catalog
Ampere Rating
Inches (mm)
Number
AL
L-Rated
225
—
10.0 (254)
SXSS1
400
—
10.0 (254)
SXSS1
600
—
10.0 (254)
SXSS1
800
400
10.0 (254)
SXSS1
1000
600
10.0 (254)
SXSS1
1200
800
10.0 (254)
SXSS1
1350
1000
13.5 (343)
SXSS2
1600
1200
13.5 (343)
SXSS2
2000
1350,1600
13.5 (343)
SXSS2
2500
2000
18.5 (470)
SXSS3
3000
2500
18.5 (470)
SXSS3
3200
2000
18.5 (470)
SXSS3
4000
3000,3200
23.0 (584)
SXSS4
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
13.5
13.5
13.5
13.5
13.5
13.5
23.0
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(254)
(343)
(343)
(343)
(343)
(343)
(343)
(584)
Single Drop Rod Hanger, Catalog Numbers
Ampere Rating
Catalog Number
AL
L-Rated
225
—
—
400
—
—
600
—
SXDRA1
800
400
SXDRA2
1000
600
SXDRA3
1200
800
SXDRA4
1350
1000
SXDRA5
1600
1200
SXDRA6
2000
1350,1600
SXDRA7
2500
2000
—
3000
2500
—
3200
2000
—
4000
3000,3200
—
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
SXSS1
SXSS1
SXSS1
SXSS1
SXSS1
SXSS1
SXSS1
SXSS1
SXSS2
SXSS2
SXSS2
SXSS2
SXSS2
SXSS2
SXSS4
BUSWAY
SYSTEMS
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
14
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Structural Steel Hanger
A complete offering of hangers is available to support Sentron Busway in
both vertical and horizontal applications. Structural Steel hangers support
Sentron Busway in horizontal applications on 10 ft. (3.05m) centers.
Additional hangers may be used if structural requirements mandate their
use.
Single Drop Rod Hanger
A complete offering of hangers is available to support Sentron Busway in
both vertical and horizontal applications. Single drop rod hangers support
Sentron Busway in horizontal applications on 10 ft. (3.05m) centers.
Additional hangers may be used if structural requirements mandate their
use. The contractor must supply drop rods to complete assembly for single
drop rod hangers.
—
—
—
SXDRC1
SXDRC2
SXDRC3
SXDRC4
SXDRC5
SXDRC6
SXDRC8
SXDRC7
—
—
—
—
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-39
Busway Systems
BUSWAY
SYSTEMS
14
Hangers and End Closers
Selection
Wall Mounted Hanger, Dimensions and Catalog Numbers
Dimensions Inches (mm)
Ampere Rating
“A”
”B”
”C”
AL
L-Rated
225
—
12.3 (311)
6.1 (156) 4.2 (107)
400
—
12.3 (311)
6.1 (156) 4.2 (107)
600
—
12.3 (311)
6.1 (156) 4.2 (107)
800
400
12.3 (311)
6.1 (156) 3.8 (97)
1000
600
12.3 (311)
6.1 (156) 3.8 (97)
1200
800
12.3 (311)
6.1 (156) 2.8 (72)
1350
1000
16.3 (413)
8.1 (206) 4.4 (111)
1600
1200
16.3 (413)
8.1 (206) 3.9 (98)
2000
1350,1600
16.3 (413)
8.1 (206) 2.8 (70)
2500
2000
20.8 (527) 10.4 (264) 3.6 (92)
3000
2500
20.8 (527) 10.4 (264) 2.5 (64)
3200
2000
20.8 (527) 10.4 (264) 1.8 (46)
4000
3000,3200
25.3 (641) 12.6 (321) 2.5 (64)
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH2
SXWH2
SXWH2
SXWH3
SXWH3
SXWH3
SXWH4
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH1
SXWH2
SXWH2
SXWH2
SXWH3
SXWH3
SXWH3
SXWH4
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
12.3
12.3
12.3
12.3
12.3
12.3
12.3
12.3
16.3
16.3
16.3
20.8
20.8
20.8
25.3
(311)
(311)
(311)
(311)
(311)
(311)
(311)
(311)
(413)
(413)
(413)
(527)
(527)
(527)
(641)
6.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
8.1
8.1
8.1
10.4
10.4
10.4
12.6
(156)
(156)
(156)
(156)
(156)
(156)
(156)
(156)
(206)
(206)
(206)
(264)
(264)
(264)
(321)
4.2
4.2
4.2
3.8
3.8
2.8
2.8
2.8
4.4
3.9
2.8
3.6
2.5
1.8
2.5
(107)
(107)
(107)
(97)
(97)
(72)
(72)
(72)
(111)
(98)
(70)
(92)
(64)
(46)
(64)
Catalog
Number
Wall Mounted Hanger
Wall Mounted Hangers are used for horizontal
applications close to a wall. The busway can be mounted
either edgewise or flatwise to the wall.
Wall Mounted Hanger ensures the minimum clearance
between the wall and the busway run.
End Closers
End closers safely terminate a busway run and protect the
bus bar ends. End closers may be removed easily in order
to extend a busway run. End closers are shipped with
Glastic insulation pieces, however, joint stacks and
inspection covers are not included.
End Closers
(Joint stack and covers not included)
Suffix ECLS
14-40
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Roof and Wall Flanges
Selection
Roof, wall and floor flanges are available for
Sentron Busway. When the busway run passes
thorough a roof, wall or ceiling, a flange should
be used. Flanges do not offer support to the
busway. Flanges provide a means of covering the
hole created in the existing structure. Additional
sealant may be required to meet fire codes and
all other local requirements. No caulking or
gasketing is provided with Sentron flanges.
Roof Flanges, Dimensions
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
16 (406)
16 (406)
16 (406)
20.5 (521)
20.5 (521)
20.5 (521)
25 (635)
18 (457)
18 (457)
18 (457)
18 (457)
18 (457)
18 (457)
22 (559)
22 (559)
22 (559)
22 (559)
26.5 (673)
26.5 (673)
31 (787)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
12 (305)
16 (406)
16 (406)
16 (406)
20.5 (521)
20.5 (521)
20.5 (521)
25 (635)
18 (457)
18 (457)
18 (457)
18 (457)
18 (457))
18 (457)
18 (457)
18 (457)
22 (559)
22 (559)
22 (559)
26.5 (673)
26.5 (673)
26.5 (673)
31 (787)
Wall, Ceiling and Floor Flanges, Dimensions
Dimensions Inches (mm)
Ampere Rating
“A”
”B”
AL
L-Rated
225
—
11 (279)
7 (178)
400
—
11 (279)
7 (178)
600
—
11 (279)
7 (178)
800
400
11 (279)
7 (178)
1000
600
12 (305)
8 (203)
1200
800
13 (330)
9 (229)
1350
1000
14 (356)
10 (254)
1600
1200
15 (381)
11 (279)
2000
1350,1600
17 (432)
13 (330)
2500
2000
20 (508)
16 (406)
3000
2500
22 (559)
18 (457)
3200
2000
24 (610)
20 (508)
4000
3000,3200
26 (660)
22 (559)
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
10
10
10
10
11
12
12
13
15
15
17
18
19
21
26
(254)
(254)
(254)
(254)
(279)
(305)
(305)
(330)
(381)
(381)
(432)
(457)
(483)
(533)
(660)
Roof Flanges
Suffix GRFL
BUSWAY
SYSTEMS
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Rating
L-Rated
—
—
—
400
600
800
1000
1200
1350,1600
2000
2500
2000
3000,3200
Roof Flanges
Roof flanges are available for Sentron Busway. When the busway run passes
thorough a roof, a flange should be used. Flanges do not offer support to the
busway. Flanges provide a means of covering the hole created in the existing
structure. Additional sealant may be required to meet fire codes and all other
local requirements. No caulking or gasketing is provided with Sentron flanges.
Roof flanges provide a watertight seal for use with NEMA 3R and IP66 rated
busway. Roof pitch must be indicated on drawings when ordering roof flanges.
14
Ampere
AL
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
Dimensions Inches (mm)
“A”
”B”
Wall, Ceiling and Floor Flanges
Wall/Floor flanges are available for Sentron Busway. When the busway run
passes thorough a wall or ceiling, a flange should be used. Flanges do not
offer support to the busway. Flanges provide a means of covering the hole
created in the existing structure. Additional sealant may be required to meet
fire codes and all other local requirements. No caulking or gasketing is
provided with Sentron flanges.
Wall, Ceiling and Floor Flanges
Suffix GWFL
6 (152)
6 (152)
6 (152)
6 (152)
7 (178)
8 (203)
8 (203)
9 (229)
11 (279)
11 (279)
13 (330)
14 (356)
15 (381)
17 (432)
22 (559)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-41
Busway Systems
Flanged Ends
Selection
Flanged ends provide a direct connection to low voltage
switchgear, switchboards, motor control centers, large
power panels, and other electrical distribution
equipment. Flanged ends are shipped with one joint
stack assembly. The switchgear manufacture supplies
lugs and mounting hardware. See illustration for flanged
end drilling patterns.
BUSWAY
SYSTEMS
14
Flanged End, Dimensions
Ampere
AL
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
3200
4000
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
Rating
L-Rated
—
—
—
400
600
800
1000
1200
1350,1600
2000
2500
2000
3000,3200
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Dimensions Inches (mm)
Fig.
“W”
No.
1.75
1.75
1.75
2.38
3.25
4.38
5.38
6.50
8.75
5.63
6.75
6.75
9.00
(44.4)
(44.4)
(44.4)
(60.5)
(82.6)
(111.3)
(136.7)
(165.1)
(222.3)
(143.0)
(171.5)
(171.5)
(228.6)
1
1
1
1
1
1
1
1
1
2
2
2
2
1.75
1.75
1.75
1.75
2.25
2.88
3.50
4.50
6.00
6.50
8.50
4.75
5.50
6.50
8.50
(44.4)
(44.4)
(44.4)
(44.4)
(57.2)
(73.2)
(88.9)
(114.3)
(152.4)
(165.1)
(215.9)
(120.7)
(139.7)
(165.1)
(215.9)
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
Flanged End
Suffix FRND
Figure 1
Figure 2
Flanged End Bus Bar Drilling Pattern (NEMA)
(Same pattern for 2 bus bars per pole, see figure 2 above.)
Other
See
drilling patterns are available and must be specified at order entry.
Figures 4, 5 and 6 on page 14-43.
14-42
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Busway Systems
Flanged Ends
Selection
”B”
”C”
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
15.50 (395)
15.50 (395)
15.50 (395)
15.50 (395)
20.0 (508)
20.0 (508)
24.0 (610)
24.0 (610)
8.00 (203)
8.00 (203)
8.00 (203)
8.00 (203)
8.00 (203)
13.50 (343)
13.50 (343)
13.50 (343)
13.50 (343)
18.00 (457)
18.00 (457)
22.0 (569)
22.0 (569)
4.38
4.38
4.38
4.38
4.38
7.13
7.13
7.13
7.13
4.50
4.50
5.50
5.50
(111)
(111)
(111)
(111)
(111)
(181)
(181)
(181)
(181)
(114)
(114)
(140)
(140)
1.94
1.94
1.94
1.94
1.94
1.60
2.10
2.66
3.78
0.68
0.68
0.68
0.68
(49)
(49)
(49)
(49)
(49)
(41)
(53)
(67)
(96)
(17)
(17)
(17)
(17)
3.88
3.88
3.88
3.88
2.06
3.19
4.19
5.31
7.56
1.37
1.37
1.37
1.37
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
10.0 (254)
15.50 (395)
15.50 (395)
15.50 (395)
15.50 (395)
20.0 (508)
20.0 (508)
20.0 (508)
24.0 (610)
8.00
8.00
8.00
8.00
8.00
8.00
8.00
13.50
13.50
13.50
13.50
18.00
18.00
18.00
22.00
4.38
4.38
4.38
4.38
4.38
4.38
4.38
7.13
7.13
7.13
7.13
4.50
4.50
4.50
5.50
(111)
(111)
(111)
(111)
(111)
(111)
(111)
(181)
(181)
(181)
(181)
(114)
(114)
(114)
(140)
1.63
1.63
1.63
1.63
1.88
0.85
1.16
1.66
2.41
2.66
3.66
0.68
0.68
0.68
0.68
(41)
(41)
(41)
(41)
(48)
(21)
(29)
(42)
(42)
(67)
(93)
(17)
(17)
(17)
(17)
3.25
3.25
3.25
3.25
3.75
1.69
2.31
3.31
4.81
5.31
7.31
1.37
1.37
1.37
1.37
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Figure 1
1.75
1.75
1.75
1.75
2.25
2.88
3.50
4.50
6.00
6.50
8.50
4.75
5.50
6.50
8.50
(44.4)
(44.4)
(44.4)
(44.4)
(57.2)
(73.2)
(88.9)
(114.3)
(152.4)
(165.1)
(215.9)
(120.7)
(139.7)
(165.1)
(215.9)
1
1
1
1
1
2
2
2
2
2
1
3
3
3
3
(203)
(203)
(203)
(203)
(203)
(203)
(203)
(343)
(343)
(343)
(343)
(457)
(457)
(457)
(569)
”D”
Figure 2
”E”
”F”
”G”
Fig. No.
(99)
(99)
(99)
(99)
(52)
(81)
(106)
(135)
(192)
(36)
(36)
(36)
(36)
—
—
—
—
—
—
—
—
—
4.44
5.56
6.32
7.81
(113)
(141)
(161)
(198)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
8.50 (216)
8.50 (216)
8.50 (216)
8.50 (216)
13.25 (337)
13.25 (337)
13.25 (337)
14.25 (362)
4, 5
4, 5
4, 5
4, 5
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
(83)
(83)
(83)
(83)
(95)
(43)
(59)
(84)
(122)
(135)
(186)
(36)
(36)
(36)
(36)
—
—
—
—
—
—
—
—
—
—
—
3.56
4.32
5.31
7.31
(90)
(110)
(135)
(186)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
8.50 (216)
8.50 (216)
8.50 (216)
8.50 (216)
13.25 (337)
13.25 (337)
13.25 (337)
14.25 (362)
4, 5
4, 5
4, 5
4, 5
4, 5
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
4, 6
Figure 3
Integral and Internal Ground Strap Drilling Detail
Figure 4
Figure 5
Figure 6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-43
BUSWAY
SYSTEMS
“A”
14
Flanged End, Dimensions (standard/min.)
Dimensions Inches (mm)
Ampere Rating
Ref. Bar Width Fig. No.
AL
L-Rated
225
—
2.38 (60.5)
1
400
—
2.38 (60.5)
1
600
—
2.38 (60.5)
1
800
400
2.38 (60.5)
1
1000
600
3.25 (82.6)
2
1200
800
4.38 (111.3)
2
1350
1000
5.38 (136.7)
2
1600
1200
6.50 (165.1)
2
2000
1350,1600
8.75 (222.3)
2
2500
2000
5.63 (143.0)
3
3000
2500
6.75 (171.5)
3
3200
2000
7.50 (190.5)
3
4000
3000,3200
9.00 (228.6)
3
Busway Systems
Panelboards and Meter Center Modules
Meter center modules provide a quick and
convenient method of connecting to metering
devices for both commercial and industrial
applications.
Dimensional Data Required
Dimensions Inches (mm)
“A”
Distance between floor and bottom
of meter center as required by the
customer.
“B”
Dimension from bottom of meter
center to centerline of meter center
joint connection stack:
100-125A Panel, B = 16.5 (419)
200A Panel, B = 22.0 (559)
“C”
Equals “A” plus “B”, Minimum 16.0 (406)
“D”
Individual meter center height.
Consult Modular Metering application
information.
BUSWAY
SYSTEMS
14
Meter center modules connect at the side of a
busway run to special joint stacks; these special
joints can be added to existing busway to
accommodate meter center module
connections. When using multiple metering
stacks, main disconnects are available if the
system reaches the 6 circuit rule (see metering
bulletin for further information).
14-44
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Selection
Busway Systems
Selection
Meter Center Cubicles
Meter center cubicles provide a quick and convenient method of connecting to metering devices for both commercial and
industrial applications and have the main disconnect circuit breaker factory installed.
Having the main disconnect built into the device reduces the required space on the right and left side of the busway. Meter
center modules connect at the side of the cubicle frame box using an SBJ4 stack. Meter center cubicles are available for
600 – 1200 Amp (L, M and N Frames). They are available with flexible meter center connections, left side, right side or both.
(When ordering a meter center cubicle a SBJ4 stack must be ordered separately.)
M-Rated
—
—
—
400
—
600
800
1000
1200,1350
1600
2000
—
—
2500,3000,3200
4000
Meter Center Module
3.9
3.9
3.9
3.9
4.4
5.1
5.7
6.7
8.2
8.7
10.7
11.8
13.3
15.3
19.3
(99)
(99)
(99)
(99)
(112)
(130)
(145)
(170)
(208)
(221)
(272)
(300)
(335)
(389)
(491)
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
(813)
37
37
37
37
37
37
37
37
37
37
37
37
37
37
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
26
26
26
26
26
26
26
26
26
26
26
26
26
26
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
20 (490)
20 (490)
23.5 (597)
23.5 (597)
28 (711)
28 (711)
28 (711)
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
20 (490)
20 (490)
20 (490)
20 (490)
23.5 (597)
23.5 (597)
28 (711)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-45
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
(620)
(620)
(620)
(620)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
(610)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
20 (490)
20 (490)
20 (490)
20 (490)
20 (490)
23.5 (597)
28 (711)
Main Disconnect Meter Module
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
(940)
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
(660)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
16 (406)
20 (490)
20 (490)
20 (490)
20 (490)
23.5 (597)
23.5 (597)
28 (711)
Meter Center Cubicle
Side Mount Panelboard
BUSWAY
SYSTEMS
CU
225
400
600
800
1000
1200
1350
1600
2000
—
2500
3000
3200
4000
5000
N Frame Breaker (800-1200A)
A
B
C
14
Molded Case Circuit Breaker Cubicles with Meter Tap Stack Provisions Dimensions, Inches (mm)
L Frame Breaker (250-600A)
M Frame Breaker (250-600A)
Busway
Ampere Rating
Width W
A
B
C
A
B
C
AL
L-Rated
225
—
3.9 (99)
32 (813)
24 (620)
16 (406)
37 (940)
26 (660)
16 (406)
400
—
3.9 (99)
32 (813)
24 (620)
16 (406)
37 (940)
26 (660)
16 (406)
600
—
3.9 (99)
32 (813)
24 (620)
16 (406)
37 (940)
26 (660)
16 (406)
800
400
4.6 (117)
32 (813)
24 (610)
16 (406)
37 (940)
26 (660)
16 (406)
1000
600
5.4 (137)
32 (813)
24 (610)
16 (406)
37 (940)
26 (660)
16 (406)
1200
800
6.6 (168)
32 (813)
24 (610)
16 (406)
37 (940)
26 (660)
16 (406)
1350
1000
7.6 (193)
32 (813)
24 (610)
16 (406)
37 (940)
26 (660)
16 (406)
1600
1200
8.7 (221)
32 (813)
24 (610)
20 (490)
37 (940)
26 (660)
20 (490)
2000
1350,1600
10.9 (277)
32 (813)
24 (610)
20 (490)
37 (940)
26 (660)
20 (490)
2500
2000
13.7 (348)
32 (813)
24 (610)
23.5 (597)
37 (940)
26 (660)
23.5 (597)
3000
2500
15.8 (401)
32 (813)
24 (610)
23.5 (597)
37 (940)
26 (660)
23.5 (597)
3200
2000
17.3 (439)
32 (813)
24 (610)
23.5 (597)
37 (940)
26 (660)
28 (711)
4000
3000,3200
20.3 (516)
32 (813)
24 (610)
28 (711)
37 (940)
26 (660)
28 (711)
4000
3000,3200
20.3 (516)
32 (813)
24 (610)
28 (711)
37 (940)
26 (660)
28 (711)
Busway Systems
Installation and Application Information
Installation
In preparation for installation of your
busway systems, it is important to
familiarize yourself with the following
installation publications:
▪ General Instructions For Handling,
Installation, Operation and
Maintenance of Busway Rated 600
volts or less (NEMA Standards
Publication BU1)
BUSWAY
SYSTEMS
14
▪ Storage, Installation and
Maintainance Instructions for Sentron
Busway (31-9918-01)
These publications should be read
through thoroughly and used as
reference during installation to ensure
proper installation procedures. All
Selection
equipment should be inspected upon
delivery. If the busway is not installed
immediately, it should be stored in a
clean, dry location. Factory supplied
record drawings as well as installation
tools should be accessible in preparation
for installation.
UL 1479 Fire Rated Installations
Sentron Busway has been tested in
accordance with UL 1479 and offers a
certified two hour fire rating for gypsum
wallboard construction and a three hour
fire rating for concrete slab or block
penetrations. These ratings were
achieved using standard busway
installed with SpecSeal® sealant from
Specified Technologies Inc. The
SpecSeal® fire stop system provides
superior
Busway Order Entry Checklist
Note: Submit one checklist for each busway run.
Date Submitted: ____________
Purchase Order #: _______________________
Project Name: _____________________________
Submitted By: _____________________________
Sales Engineer: ____________________________
_____ Released
_____ Hold for Release
Run Designation: ___________________________
Busway Catalog #: __________________________
Service:
_____ Phase _____ Wire _____ Volts _____ Amps
Conductor: _____ Cu _____ Al _____ “M” Rated _____ “L”
Rated
Neutral:
_____ None _____ 100% _____ 200%
Ground:
_____ Case _____ Internal _____ Isolated
IP Rating
_____ IP40 (Indoor)
_____ IP55 (Splash Proof)
_____ NEMA 3R (Outdoor)
Shipping Instructions:
_____ Ship complete
_____ Ship partial
Special Shipping Requirements:___________________________
Ship not before date: ____________
Drawing Requirements:
_____ Approval drawings
_____ Record drawings
_____ # copies:
_____ # copies:
A) Engineering Information
Check applicable information and be sure it is shown on
accompanying drawing.
performance at the industry’s lowest
installed cost. Sentron is the first
busway system to achieve a fire rating
for gypsum wallboard construction.
11. _____ Riser Bus
a) _____ Load side of bus plug (top or bottom)
b) _____ Required distance from floor to top of
panel/plugs
c) _____ Meter Bank (center line of tap stack)
d) _____ Barriers and/or floor supports
12. _____ Transformer Connections
a) _____Standard XFMR Service Heads
_____ 1-three phase
_____ 3-single phase
b) Special drawing required
_____ Dimensions between phases
_____ LV spade detail including drilling and
thickness
_____ Dimension of the LV spade from tank wall
_____ Throat opening and hole pattern (if any)
13. _____ Utility Vault Connection
_____ Drawing Attached
Utility Type: _____
14. End Cable Tap Box
_____ Horizontal
_____ Vertical
_____ Standard Lugs
_____ Special Lug Requirements
No. _____ Size _____ per phase & neutral
No. _____ Size _____ per ground
Measuring
Critical to the success of any busway
installation is the layout and the accurate
measuring of the busway. First and
foremost:
Select a route for your busway that will
require the fewest fittings and the
maxumum number of 10' (3.05m) sections.
It is important that the busway system be
designed to meet the requirements of the
National Electric Code for Busway. There
are a number of techniques that may be
used to ensure an accurate measurement
before purchasing and installing the
busway. The following tools will be
required during layout and masuring:
▪ 100' (30.48m) tape measure
▪ Meauring Stick
▪ Chalkline
▪ Plumb Bob
▪ Marker
(A laser distance measuring device may
be used to speed the measuring
process).
15. _____ Busway Mounting position in reference to floor:
1. _____ Drawing Attached (Required)
2. _____ Estimate Sheets Attached (Required)
3. _____ Dimensions from walls, column lines, etc.
4. _____ Wall, floor, roof thickness and pitch
Flatwise
Edgewise
5. _____ Floor Elevations
_____ Floor to floor
_____ Floor to ceiling
B) Specifications(Check or fill appropriate blanks)
6. _____ Wall Locations
2. _____ Exception to specifications
a) Short circuit withstand _____ Ampere Symmetrical
b) Voltage Drop Requirement _____
c) Temperature-rise requirement _____
d) Current density requirement _____
e) Special Paint: Provide paint chip _____
f) Other: ____________________________
7. _____ Equipment Pads shown: Height _______
8. ____ Existing busway to be extended
a) _____ Phasing
b) _____ Nameplate Informatio
c) _____ Match to competitor: Call the factory
1. _____ Standard busway meets specifications
Exception to electrical specifications: Call the factory.
9. ____ Secial Switchboard Connection: Provide Details
10. ____ Phase transpositions: Provide phasing on drawing.
14-46
Other Notes: ___________________________________________
___________________________________________
___________________________________________
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Minimal Clearances
Minimum clearances for installing feeder
busway are shown. Additional clearance
may be required for plug-in devices
larger than 100A fusible and 250A circuit
breaker.
Busway Systems
Siemens Sentron Busway Quick Reference
General
Siemens Sentron Busway Quick Reference
Critical Dimensions:
Busway that passes through a wall, ceiling or floor:
▪ centerline of a joint to the wall, ceiling or floor = 7 in. min.
▪ centerline of a joint (above a floor support) to a floor = 16 in. min.
▪ joints cannot be positioned inside a wall, ceiling or floor (joints must be accessible for maintenance)
Feeder Busway clearances:
▪ from the top of the busway to a ceiling/floor/wall or other busway = 6 in. min.
▪ from the side of the busway to a ceiling/floor/wall or other busway = 4 in. min.
Plug-in Busway clearances:
▪ plug-in busway clearances depend on the configuration of bus plugs (see bus plug clearance charts in the
Sentron Selection and Application Guide)
▪ otherwise, clearances for feeder busway apply
▪ note orientation of the operating handle and provide clearance for access & operation
Feeder Busway length:
14
BUSWAY
SYSTEMS
▪ minimum length = 14.38 in.
▪ maximum length = 10 ft.
Plug-in & Riser length:
▪ available only in 4, 6, 8 and 10 ft. lengths
Flat Elbow section:
▪ maximum leg length = 4 ft.
▪ minimum leg length: Varies according to amperage and bus bar material
Edge Elbow section:
▪ maximum length = 4 ft.
▪ minimum leg length = 10 in.
Combination and Offset Elbows:
▪ maximum leg lengths = 4 ft.
▪ minimum leg length = 2.50 in. + (case size x .5)
Critical Details:
▪
▪
▪
▪
▪
Busway DRAWINGs must include all relevant dimensions
CENTERLINE dimensions are expected (please note any dimensions that are not center line dimensions)
WALLs and FLOORs must be located (wall & floor thickness must be included)
Locate the FRONT of all switchboards and provide the phasing of any existing boards (advise if any PADs are
located under boards)
When using RISER plug-in busway please note the desired direction of the load side of bus plugs (G, A, B, C, N
from left to right will position the load side to the bottom and “UP is On” handle operation)
TRANSFORMER THROAT connections require complete details
Horizontal plug-in busway must be oriented with the A phase on top (bolt head on top)
In-Line Disconnect CUBICLEs are engineered to order. The FRONT of the cubicle must be specified
▪
▪
▪
Outdoor Busway:
▪ Route busway to minimize outdoor busway run length
▪ Avoid installing busway near exhaust pipes that may generate steam or caustic vapors
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-47
Busway Power Distribution
XJ-L™ Plug-In Busway
Selection
Busway Sections — Complete
10 Foot Plug-in Sections햲
Catalog
Number
List
Price $
5 Foot Plug-in Sections햲
Weight
(lbs.)
Catalog
Number
List
Price $
Switchboard or
Panelboard Stubs
(flanged end)
2 Foot Plug-in Sections햲
Weight
(lbs.)
Catalog
Number
List
Price $
Weight
(lbs.)
Catalog
Number
List
Price $
100 Ampere Busway — Copper Conductors햳
3-Phase, 3-Wire
600 Volts or Less
XC1003
618.00
42
XC10035
412.00
20
XC10032
240.00
8
XC1003FE
709.00
XC1003G 햴
709.00
42
XC10035G 햴
474.00
21
XC10032G 햴
277.00
9
XC1003FEG 햴
798.00
XC1003IG 햵
722.00
44
XC10035IG 햵
499.00
20
XC10032IG 햵
281.00
8
XC1003FEIG 햵
785.00
XC1003GIG 햴햵
837.00
44
XC10035GIG 햴햵
578.00
21
XC10032GIG햴햵
325.00
9
XC1003FEGIG 햴햵
888.00
XC1004
722.00
45
XC10045
474.00
21
XC10042
270.00
9
XC1004FE
774.00
XC1004G 햴
774.00
46
XC10045G 햴
505.00
22
XC10042G 햴
309.00
10
XC1004FEG 햴
862.00
XC1004IG 햵
837.00
45
XC10045IG 햵
547.00
21
XC10042IG 햵
318.00
9
XC1004FEIG 햵
875.00
XC1004GIG 햴햵
976.00
46
XC10045GIG 햴햵
630.00
22
XC10042GIG햴햵
368.00
10
XC1004FEGIG 햴햵
951.00
BUSWAY
SYSTEMS
14
3-Phase, 4-Wire
600 Volts or Less
225 Ampere Busway — Copper Conductors
3-Phase, 3-Wire
600 Volts or Less
X2003
837.00
56
X20035
470.00
27
X20032
258.00
12
X2003FE
X2003G 햶
951.00
58
X20035G 햶
499.00
28
X20032G 햶
298.00
13
X2003FEG 햶
1103.00
951.00
56
X20035IG 햵
544.00
27
X20032IG 햵
315.00
12
X2003FEIG 햵
1115.00
1115.00
58
X20035GIG 햵햶
671.00
28
X20032GIG 햵햶
371.00
13
X2003FEGIG 햵햶
1254.00
X2003IG 햵
X2003GIG 햵햶
3-Phase, 4-Wire
963.00
480 Volts or Less
X2004
913.00
60
X20045
519.00
29
X20042
286.00
14
X2004FE
1052.00
X2004G 햶
932.00
62
X20045G 햶
565.00
30
X20042G 햶
326.00
15
X2004FEG 햶
1166.00
X2004IG 햵
1115.00
60
X20045IG 햵
594.00
29
X20042IG 햵
326.00
14
X2004FEIG 햵
1204.00
X2004GIG 햵햶
1204.00
62
X20045GIG 햵햶
722.00
30
X20042GIG 햵햶
401.00
15
X2004FEGIG 햵햶
1330.00
400 Ampere Busway — Copper Conductors
3-Phase, 3-Wire
600 Volts or Less
X4003
1127.00
69
X40035
676.00
35
X40032
338.00
15
X4003FE
1299.00
X4003G
1296.00
75
X40035G
778.00
38
X40032G
389.00
16
X4003FEG
1487.00
X4003IG
1353.00
79
X40035IG
811.00
40
X40032IG
405.00
17
X4003FEIG
1505.00
X4003GIG
1466.00
84
X40035GIG
879.00
43
X40032GIG
439.00
18
X4003FEGIG
1693.00
3-Phase, 4-Wire
480 Volts or Less
X4004
1240.00
79
X40045
744.00
40
X40042
372.00
17
X4004FE
1429.00
X4004G
1409.00
84
X40045G
845.00
43
X40042G
422.00
18
X4004FEG
1617.00
X4004IG
1466.00
89
X40045IG
879.00
45
X40042IG
439.00
19
X4004FEIG
1635.00
X4004GIG
1578.00
94
X40045GIG
947.00
48
X40042GIG
473.00
20
X4004FEGIG
1823.00
햲
Plug-in sections do not include outlet covers.
Plug-in outlet covers are available as an option.
Catalog number XOC. List price $12.00 each.
햳 100A XJ-L Aluminum sections are no longer available.
However, 100A Copper sections are fully compatible
with existing Aluminum busway.
햴 100% Internal Ground bus included.
햵 100% Isolated Ground bus included.
햶 60% Internal Ground bus included.
Hangers: Two hangers are furnished No Charge with each
10' straight section. One hanger is furnished No
Charge with each 2' and 5' straight section, and
elbows.
14-48
Additional Hangers: Catalog Number XH2 — $34.50 each.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Busway Power Distribution
XJ-L™ Plug-In Busway
Selection
Busway Accessories — Complete Devices
90° Elbows
Catalog
Number
End Tap
Box
End Closers
List
Price $
Catalog
Number
List
Price $
Catalog
Number
Center Tap
Box
List
Price $
Catalog
Number
List
Price $
100 Ampere Busway — Copper Conductors
3-Phase, 3-Wire
600 Volts or Less
XC1003L
381.00
XE100
77.00
XC1003ETVB
858.00
—
—
XC1003LG
426.00
XE100
77.00
XC1003ETVBG
964.00
—
—
XC1003LIG
434.00
XE100
77.00
XC1003ETVBIG
950.00
—
—
XC1003LGIG
492.00
XE100
77.00
XC1003ETVBGIG
1072.00
—
—
XC1004L
430.00
XE100
77.00
XC1004ETVB
934.00
—
—
XC1004LG
449.00
XE100
77.00
XC1004ETVBG
1042.00
—
—
XC1004LIG
458.00
XE100
77.00
XC1004ETVBIG
1056.00
—
—
XC1004LGIG
516.00
XE100
77.00
XC1004ETVBGIG
1149.00
—
—
3-Phase, 4-Wire
600 Volts or Less
3-Phase, 3-Wire
600 Volts or Less
949.00
XE200
86.00
X2003ETVB
1164.00
X2003M
1242.00
X2003LG
1000.00
XE200
86.00
X2003ETVBG
1333.00
X2003MG
1267.00
X2003LIG
1025.00
XE200
86.00
X2003ETVBIG
1349.00
X2003MIG
1267.00
X2003LGIG
1153.00
XE200
86.00
X2003ETVBGIG
1517.00
X2003MGIG
1292.00
3-Phase, 4-Wire
X2004L
BUSWAY
SYSTEMS
X2003L
14
225 Ampere Busway — Copper Conductors
480 Volts or Less
975.00
XE200
86.00
X2004ETVB
1271.00
X2004M
1254.00
X2004LG
1050.00
XE200
86.00
X2004ETVBG
1409.00
X2004MG
1254.00
X2004LIG
1216.00
XE200
86.00
X2004ETVBIG
1455.00
X2004MIG
1280.00
X2004LGIG
1368.00
XE200
86.00
X2004ETVBGIG
1609.00
X2004MGIG
1305.00
400 Ampere Busway — Copper Conductors
3-Phase, 3-Wire
600 Volts or Less
X4003L
1281.00
XE400
89.00
X4003ETVB
1673.00
X4003M
1675.00
X4003LG
1351.00
XE400
89.00
X4003ETVBG
1916.00
X4003MG
1843.00
X4003LIG
1384.00
XE400
89.00
X4003ETVBIG
1938.00
X4003MIG
1934.00
X4003LGIG
1556.00
XE400
89.00
X4003ETVBGIG
2180.00
X4003MGIG
2178.00
3-Phase, 4-Wire
480 Volts or Less
X4004L
1410.00
XE400
89.00
X4004ETVB
1841.00
X4004M
1843.00
X4004LG
1479.00
XE400
89.00
X4004ETVBG
2083.00
X4004MG
2027.00
X4004LIG
1513.00
XE400
89.00
X4004ETVBIG
2106.00
X4004MIG
2128.00
X4004LGIG
1684.00
XE400
89.00
X4004ETVBGIG
2348.00
X4004MGIG
2396.00
Plug-In Tap Boxes or Feed-Ins
Catalog
Number
List
Price $
Catalog
Number
3-Phase, 3-Wire
Elbows:
Catalog Numbers as listed above are not complete.
A 1, 2, 3 or 4 suffix denoting configuration is
required. Example: Catalog Number X1003L2 is an
edgewise right hand elbow. Number Identification
(1)=Flatwise Right Hand, (2)=Edgewise Right Hand,
(3)=Flatwise Left Hand, (4)=Edgewise Left Hand.
Flatwise and Edgewise refer to busway casing or
housing for XJ-L style busway.
100A XJ-L Aluminum sections are no longer
available. However, 100A Copper sections are fully
compatible with existing Aluminum busway.
100% Internal Ground bus included.
100% Isolated Ground bus included.
60% Internal Ground bus included.
Isolated ground kit for tap box W68113 — $46.00
each.
Discount Schedule BUSW
Center
Tap Boxes are built on to a 2' straight
section. Catalog number X2004MG — Rated 400
Amps. Center tap box for 100 amp use 200 AMP
Plug-In Tap Box.
Must use X2003MIG.
Must use X2003MGIG.
Must use X2004MIG.
Must use X2004MGIG.
Note: Wall and Floor Flanges: a two piece 14 gauge
steel collar which fits around busway housing.
Flanges can be field assembled on busway
prior to or after busway installed. Wall or Floor
Flange Catalog Number — WF1 for X100 and
WF2 for X200 — $81.00 each. Packaged 5 per
carton.
List
Price $
600 Volts or Less
X103PB
242.00
X2003PB
616.00
X103PBG
301.00
X2003PBG
823.00
X103PBIG
305.00
X103PBGIG
358.00
3-Phase, 4-Wire
—
—
480 Volts or Less
X104PB
346.00
X2004PB
646.00
X104PBG
401.00
X2004PBG
925.00
X104PBIG
411.00
—
X104PBGIG
464.00
—
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-49
Busway Power Distribution
BD® Plug-In (225 — 1600 Ampere)
Selection
225–1600 Amperes
Ampere
Rating
Plug In 햲
10'– 0"
Straight
Length
Catalog
Number
10'– 0"
Straight
Length
Ground
Bus
Adder
Suffix GK
90° Elbow Prefix
Building Expansion
Fitting
SwitchBoard
Connection 햷
Prefix
List
Price $
Catalog
Number
Case
Dimensions
(inches)
Shipping
Weight
Lb./Ft.
햳
햴
햵햶
List
Price $
List Price
Per Foot $
Catalog
Number
41⁄16
41⁄16
41⁄16
61⁄16
61⁄16
121⁄8
121⁄8
09
121⁄2
131⁄2
181⁄2
22
28
29
1584.00
2395.00
3067.00
4486.00
4854.00
7338.00
7819.00
66.
66.
69.
69.
69.
98.
140.
LDP302
LDP304
LDP306
LDP308
LDP310
LDP313
LDP316
1520.00
1761.00
1963.00
2394.00
2584.00
3573.00
3712.00
FEP302
FEP304
FEP306
FEP308
FEP310
FEP313
FEP316
1052.00
1216.00
1635.00
1977.00
2230.00
2940.00
3004.00
EJP302
EJP304
EJP306
EJP308
EJP310
EJP313
EJP316
12
141⁄2
151⁄2
28
2053.00
3459.00
3929.00
5729.00
66.
66.
69.
69.
LDP4024
LDP4044
LDP4064
LDP4084
1875.00
2293.00
2432.00
3167.00
FEP4024
FEP4044
FEP4064
FEP4084
1191.00
1483.00
1837.00
2294.00
EJP4024
EJP4044
EJP4064
EJP4084
4081.00
5677.00
6451.00
8694.00
32
6704.00
69.
LDP4104
3459.00
FEP4104
2420.00
EJP4104
10139.00
List
Price $
List
Price $
Copper
3-Phase, 3-Wire
225
400
600
800
1000
1350
1600
BDP302
BDP304
BDP306
BDP308
BDP310
BDP313
BDP316
600V or Less
x
x
x
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
BUSWAY
SYSTEMS
14
3-Phase, 4-Wire — Full Capacity Neutral
225
400
600
800
1000
BDP4024
BDP4044
BDP4064
BDP4084
BDP4104
41⁄16
41⁄16
41⁄16
81⁄8
81⁄8
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
x 87⁄8
480V or Less
“M” Rating / Standard Rating
Conversion Table
Aluminum to Copper Cross Reference
Plug In 햲
10'– 0"
Straight
Length
Catalog
Number
Ampere
Rating
Case
Dimensions
(inches)
Aluminum
225
400
600
800
1000
1200
Ampere
Rating
ABD302
ABD304
ABD306
ABD308
ABD310
ABD312
1000/A Square Inch
“M” Rating
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
4000
Case
Dimensions
(inches)
3-Phase, 3-Wire
41⁄16
41⁄16
61⁄16
61⁄16
121⁄8
121⁄8
x
x
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
225
400
600
800
1000
1350
1600
3-Phase, 4-Wire — Full Capacity Neutral
225
400
600
800
1000
1200
Plug In 햲
10'– 0"
Straight
Length
Catalog
Number
Copper
3-Phase, 3-Wire
ABD4024
ABD4044
ABD4064
ABD4084
ABD4104
ABD4124
41⁄16
41⁄16
61⁄16
81⁄8
121⁄8
121⁄8
x
x
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
For inches / millimeters conversion, see Application Data
Section.
BDP302
BDP304
BDP306
BDP308
BDP310
BDP313
BDP316
41⁄16
41⁄16
41⁄16
61⁄16
61⁄16
121⁄8
121⁄8
x
x
x
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
Standard 55°C Rating
BDP
—
0600
0800
0800
1000
—
1350
1600
—
—
—
—
3-Phase, 4-Wire — Full Capacity Neutral
225
400
600
800
1000
BDP4024
BDP4044
BDP4064
BDP4084
BDP4104
41⁄16
41⁄16
41⁄16
81⁄8
81⁄8
x
x
x
x
x
87⁄8
87⁄8
87⁄8
87⁄8
87⁄8
햶
햵
Suffix
Description
햲 Consult
-1
Right Flatwise
햳 List
-2
Right Edgewise
-3
Left Flatwise
-4
Left Edgewise
local sales office for five foot length.
prices are for standard construction, for higher short
circuit ratings add an “H” after the “D” or “P” (ABDH302
or BDPH302) and add 20% to the list price. Consult sales
office for ratings.
햴 “GK” is an internal ground bus. For any other ground
configuration, consult local sales office. List price is per
foot. Please use following footage for fittings:
Elbow - 3'
SWB - 1'
End Cable Tap Box - 1'
Center Cable Tap Box - 10'
Building Expansion - 10'
14-50
3333.00
4372.00
5171.00
7299.00
7896.00
10341.00
11343.00
Appropriate suffix
must be added to
Elbow Catalog
Number to order.
햷 Switchboard
Right Edgewise
Elbow (-2)
Left Edgewise
Elbow (-4)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
stub includes flange to cover cutout
in top of indoor switchboard and 6" of bus inside
switchboard. Connecting hardware supplied by
switchboard manufacturer.
Discount Schedule BUSW
Busway Power Distribution
BD® Plug-In (225 — 1600 Ampere)
Selection
225–1600 Amperes
Cable Tap Box
End
Catalog
Number
Hangers
End Closure
Center
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
ETB302
1927.00
CTB302
2813.00
ECP6
156.00
BDH10
63.00
ETB304
2319.00
CTB304
3612.00
ECP6
ETB306
3409.00
CTB306
4614.00
ECP6
BDH10
63.00
ETB308
3447.00
CTB308
6058.00
ECP10
ETB310
3472.00
CTB310
6388.00
ECP10
BDH10
63.00
ETB313
3497.00
CTB313
9391.00
ECA10
ETB316
3524.00
CTB316
9872.00
ECA10
163.00
BDH12
65.00
156.00
BDH10
63.00
156.00
BDH10
63.00
Copper
3-Phase, 3-Wire
600V or Less
156.00
158.00
3-Phase, 4-Wire — Full Capacity Neutral
480V or Less
CTB4024
3282.00
ECP6
ETB4044
2598.00
CTB4044
4677.00
ECP6
ETB4064
3802.00
CTB4064
5462.00
ECP6
ETB4084
3992.00
CTB4084
7274.00
ECA8
ETB4104
4042.00
CTB4104
8238.00
ECA8
164.00
BDH12
65.00
BDH12
65.00
Rod-Hanger Adapter (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UJ100
Includes
busway stub. Total length added to run is 2'
for 225A and 400A aluminum or 225A–600A copper;
3' for all others. Box is designed to connect to offset
bus-bar ends. When it is to be connected to straight
bus-bar ends, adapter will be furnished upon request.
Must be factory-assembled to busway. Complete
device includes 10' busway.
Discount Schedule BUSW
12.70 each
Two
hangers included free of charge with each
busway section, elbow, tee and cross.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-51
BUSWAY
SYSTEMS
2155.00
14
ETB4024
Busway Power Distribution
XL-U® Aluminum (225–5000 Ampere)
Selection
225–5000 Amperes / 600 Volts or Less
Non-Ventilated 225–600 Amperes
List Price Per Foot $
Busway Catalog Number
Ampere
Rating
Accessory Charge $
Basic
Catalog
Number
Case
Shipping Feeder Plug-In
Dimensions Weight
Busway Busway
(inches)
Lb./Ft.
Suffix F Suffix P
Ground
Bus
Adder
Suffix G
UH302AB
UH304AB
UH306AB
41⁄2 x 10
41⁄2 x 10
51⁄2 x 10
8
9
10
134.
167.
208.
134.
167.
208.
47.
47.
52.
1076.
1280.
1533.
41⁄2 x 10
41⁄2 x 10
51⁄2 x 10
8
9
10
157.
195.
264.
157.
195.
264.
45.
45.
48.
1201.
1416.
1487.
90°
Elbow
Suffix L
Tee
Suffix T
Cross
Suffix X
SwitchBoard
Connection
Suffix S
TransTrans- former
former Tap
Throat 1-3 Phase
Transformer
Tap
3-1 Phase
Roof
Flange
747.
747.
747.
—
—
—
—
844.
844.
844.
—
—
—
—
3-Pole
225
400
600
4-Pole Full Neutral
225
400
600
UH502AB
UH504AB
UH506AB
BUSWAY
SYSTEMS
14
Note: For non-ventilated 225-600A busway with insulated bus bars add 15%.
Ventilated 800–5000 Amperes With Ground Bus
List Price Per Foot $
Busway Sections Complete
Ampere Rating
Edgewise
Flatwise
Basic
Catalog
Number
Case
Shipping Feeder
Dimensions Weight Busway
(inches)
Lb./Ft.
Suffix F
Plug-In
Busway
Suffix P
Accessory Charge $
Outdoor
Feeder
90°
Suffix
Elbow
W
Suffix L
Switch
Board
Connec- TransTee
Cross
tion
former
Suffix T Suffix X Suffix S Throat
Transformer
Tap
1-3 Phase
Transformer
Tap
Roof
3-1 Phase Flange
3-Pole
800
1000
800
800
UH308AV
UH310AV
41⁄2 x 10
41⁄2 x 10
10
11
297.
335.
311.
349.
357.
403.
1200
1350
1000
1200
UH312AV
UH313AV
51⁄2 x 10
51⁄2 x 10
12
13
459.
525.
472.
540.
549.
630.
1533.
1600
2000
1350
1600
UH316AV
UH320AV
71⁄2 x 10
71⁄2 x 10
16
19
646.
773.
659.
785.
773.
924.
1533.
2500
2000
UH325AV
91⁄2 x 10
23
950.
962.
1141.
1533.
1938.
2268.
1065.
9048.
1951.
4879.
3510.
3000
3000
UH330AV
71⁄2 x 205⁄8
32
1076.
1090.
1292.
1938.
2281.
2395.
1356.
11406.
2458.
6159.
4423.
4000
5000
3500
4000
UH340AV
UH350AV
91⁄2 x 205⁄8
91⁄2 x 205⁄8
41
45
1482.
1964.
1495.
1976.
1774.
2357.
1938.
1938.
2281.
2281.
2395.
2395.
1356.
1356.
11406.
11406.
2458.
2458.
6159.
6159.
4423.
2585.
1128.
1558.
785.
785.
6679.
6679.
1444.
1444.
3599.
3599.
1938.
2268.
1065.
1065.
9048.
9048.
1951.
1951.
4879.
4879.
1938.
2268.
1065.
1065.
9048.
9048.
1951.
1951.
4879.
4879.
1368.
2585.
3510.
4-Pole Full Neutral
800
1000
800
800
UH508AV
UH510AV
41⁄2 x 10
41⁄2 x 10
11
12
351.
440.
365.
453.
421.
527.
1648.
1648.
1648.
1648.
1964.
1964.
962.
962.
6944.
6944.
1533.
1533.
3662.
3662.
1200
1350
1000
1200
UH512AV
UH513AV
5 ⁄2 x 10
51⁄2 x 10
14
15
552.
634.
566.
646.
659.
760.
2256.
2256.
2256.
2698.
1318.
1318.
7489.
7489.
2155.
2155.
4638.
4638.
1600
2000
1350
1600
UH516AV
UH520AV
71⁄2 x 10
71⁄2 x 10
18
21
760.
950.
773.
962.
899.
1141.
2256.
2256.
2256.
2698.
2698.
1318.
1318.
7489.
8453.
2155.
2559.
4638.
5589.
2500
2000
UH525AV
91⁄2 x 10
26
1153.
1166.
1381.
2256.
2256.
2698.
1318.
9580.
3523.
7693.
3510.
3000
3000
UH530AV
71⁄2 x 205⁄8
35
1343.
1356.
1610.
2698.
2698.
3218.
1583.
9580.
4169.
7693.
4423.
4000
5000
3500
4000
UH540AV
UH550AV
91⁄2 x 205⁄8
91⁄2 x 205⁄8
47
52
1799.
2737.
1812.
2750.
2166.
3282.
2698.
2698.
3218.
1583.
13712.
4169.
9618.
4423.
1
For inches / millimeters conversion, see Application Data
Section.
Note: To form complete catalog number, use basic
catalog number and substitute suffix of required
item. Example: Basic busway Catalog Number
U316AV— accessory switchboard stub with ground
bus U316AVSG.
To price complete device, add the following feeder
busway footage to the labor charges shown:
XL-U Elbow 2' XLU-EXP Section 4'
XL-U Tee 3'
XL-U SWBD Stub 1'
XL-U Cross 4' XL-U Reducer 4'
List
prices are for standard construction for higher short
circuit rating add an “HH” after the “U” (UHH302ABP)
and add 45% to the list price. Consult sales office for
available ratings.
14-52
3510.
For
elbows other than 90°, accessory charge is doubled.
stub includes flange to cover cutout in
top of indoor switchboard and 8" of bus inside
switchboard. Connecting hardware supplied by
switchboard manufacturer.
Ventilated XL-U busway has two ratings; see above for
edgewise or flatwise mounting.
XL-U also comes in nonventilated housing; consult local
sales office.
Transformer throat connection includes gasketed box
sized to match throat plus flexible straps and bolts.
No Busway footage is included. For connection to
transformers not manufactured by Siemens,
consult factory.
Switchboard
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
Busway Power Distribution
XL-U® Aluminum (225–5000 Ampere)
Selection
225–5000 Amperes / 600 Volts or Less
Non-Ventilated 225– 600 Amperes
Accessory Charge $
Non
Ampere Fusible Fusible
Rating
Reducer Reducer
Complete Device Price $
Expansion Tap Box
Section
End
Center
Suffix J
Suffix B Suffix M
Wall Flange
1888.
2142.
2332.
1330.
1989.
2839.
1292.
1292.
1292.
UF145
UF145
UF145
226.00 UFS145
226.00 UFS145
226.00 UFS145
422.00 UE145
422.00 UE145
422.00 UE155
—
422.
293.00 422.
293.00 422.
849.
849.
849.
UH145
UH145
UH155
—
65.00
65.00
1888.
2142.
2332.
1545.
1723.
1825.
1507.
1507.
1507.
UF145
UF145
UF145
226.00 UFS145
226.00 UFS145
226.00 UFS145
422.00 UE145
422.00 UE145
422.00 UE155
293.00 422.
293.00 422.
293.00 422.
1051.
1051.
1051.
UH145
UH145
UH155
65.00
65.00
65.00
Floor Support
Hangers
End Closure
Catalog List
Catalog List
Catalog List
Draft
Weather Catalog List
Number Price $ Number Price $ Number Price $ Barrier Stop
Number Price $
3-Pole
225
400
600
—
747.
785.
—
3054.
3472.
4-Pole Full Neutral
225
400
600
—
747.
785.
—
3054.
3472.
Ventilated 800–5000 Amperes with Ground Bus
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
1051.
1051.
1419.
1419.
1419.
1419.
1419.
1787.
1787.
1787.
4410.
4410.
5957.
5957.
5957.
5957.
5957.
7514.
7514.
7514.
3142.
3142.
4257.
4257.
4257.
4257.
4257.
5374.
5374.
5374.
3054.
3054.
4131.
4131.
4131.
4131.
4473.
4613.
4854.
4854.
1356.
1356.
1761.
1761.
1761.
1761.
1761.
5969.
6235.
6235.
UF145
UF145
UF155
UF155
UF175
UF175
UF195
UF275
UF295
UF295
226.00
226.00
226.00
226.00
323.00
323.00
323.00
1103.00
1103.00
1103.00
UFS145
UFS145
UFS145
UFS145
UFS179
UFS179
UFS179
UFS279
UFS279
UFS279
422.00
422.00
422.00
422.00
506.00
506.00
506.00
709.00
709.00
709.00
UE145
UE145
UE155
UE155
UE175
UE175
UE175
UE275
UE295
UE295
293.00
293.00
293.00
293.00
715.00
715.00
715.00
1147.00
1147.00
1147.00
422.
422.
422.
422.
506.
506.
506.
709.
709.
709.
899.
899.
899.
899.
1305.
1305.
1305.
1711.
1711.
1711.
UH145
UH145
UH155
UH155
UH175
UH175
UH195
UH275
UH295
UH295
65.00
65.00
65.00
65.00
80.00
80.00
80.00
96.00
96.00
96.00
3611.
3611.
4892.
4892.
4892.
4892.
4892.
5424.
6184.
6184.
3472.
3472.
4537.
4537.
4537.
4537.
5424.
5766.
6045.
6045.
1610.
1610.
2128.
2128.
2128.
2128.
2128.
7350.
7629.
7629.
UF145
UF145
UF155
UF155
UF175
UF175
UF195
UF275
UF295
UF295
226.00
226.00
226.00
226.00
323.00
323.00
323.00
1103.00
1103.00
1103.00
UFS145
UFS145
UFS145
UFS145
UFS179
UFS179
UFS179
UFS279
UFS279
UFS279
422.00
422.00
422.00
422.00
506.00
506.00
506.00
709.00
709.00
709.00
UE145
UE145
UE155
UE155
UE175
UE175
UE195
UE275
UE295
UE295
293.00
293.00
293.00
293.00
715.00
715.00
715.00
1147.00
1147.00
1147.00
422.
422.
422.
422.
506.
506.
506.
709.
709.
709.
1153.
1153.
1153.
1153.
1673.
1673.
1673.
2052.
2052.
2052.
UH145
UH145
UH155
UH155
UH175
UH175
UH195
UH275
UH295
UH295
65.00
65.00
65.00
65.00
80.00
80.00
80.00
96.00
96.00
96.00
4-Pole Full Neutral
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
1204.
1204.
1635.
1635.
1635.
1635.
2052.
2052.
2052.
2052.
5069.
5069.
6843.
6843.
6843.
6843.
6843.
8643.
8643.
8643.
For inches / millimeters conversion, see Application Data
Section.
For
reducer, consult page 14-2 (J). On fusible reducers
no fuses are supplied.
boxes furnished with standard screw-type
mechanical lugs. For compression lugs add 30% to list
price.
Floor
and ceiling flanges are ordered by description.
Price the same as wall flanges.
rod-hanger adapter UJ100 see page 14-51.
For
Tap
Discount Schedule BUSW
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-53
BUSWAY
SYSTEMS
3-Pole
14
Ampere Accessory Charge $
Complete Device Price $
Rating
Tap Box
Wall Flange
Floor Support
End Closure
Hangers
Non
Expansion
Edge
Fusible
Fusible
Section
End
Center
Catalog
List
Catalog
List
Catalog
List
Draft
Weather
Catalog List
wise
Reducer Reducer
Suffix J
Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop
Number Price $
Busway Power Distribution
XL-U ® Copper (225–6500 Amperes)
Selection
225–6500 Amperes / 600 Volts or Less
Non-Ventilated 225–600 Amperes
List Price Per Foot $
Busway Catalog Number
Accessory Charge $
Ampere
Rating
Basic
Catalog
Number
Case
Shipping Feeder
Dimensions Weight
Busway
(inches)
Lb./Ft.
Suffix F
Plug-In
Busway
Suffix P
Ground
Bus
Adder
Suffix G
90°
Elbow
Suffix L
Tee
Suffix T
Cross
Suffix X
SwitchBoard
Connection
Suffix S
TransTrans- former
former Tap
Throat 1-3 Phase
Transformer
Tap
3-1 Phase
Roof
Flange
3-Pole
225
400
600
UH302CB
UH304CB 41⁄2 x 10
UH306CB
8
12
13
166.
248.
327.
166.
248.
327.
72.
72.
74.
—
1076.
—
—
1280.
—
—
1533.
—
747.
899.
1051.
—
—
—
—
9
13
15
227.
370.
424.
227.
370.
424.
72.
72.
74.
—
1280.
—
—
1533.
—
—
1787.
—
899.
1076.
1254.
—
—
—
—
4-Pole Full Neutral
225
400
600
UH502CB
UH504CB 41⁄2 x 10
UH506CB
BUSWAY
SYSTEMS
14
Ventilated 800–6500 Amperes With Ground Bus
List Price Per Foot $
Busway Sections Complete
Ampere Rating
Edgewise
Flatwise
Accessory Charge $
Basic
Catalog
Number
Case
Shipping Feeder
Dimensions Weight Busway
(inches)
Lb./Ft.
Suffix F
Plug-In
Busway
Suffix P
Outdoor
Feeder
90°
Suffix
Elbow
W
Suffix L
Switch
Board
Connec- TransTee
Cross
tion
former
Suffix T Suffix X Suffix S Throat
Transformer
Tap
1-3 Phase
Transformer
Tap
Roof
3-1 Phase Flange
3-Pole
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
800
1000
1000
1200
1350
1600
2000
2500
4000
4500
UH308CV
UH310CV
UH312CV
UH313CV
UH316CV
UH320CV
UH325CV
UH330CV
UH340CV
UH350CV
41⁄2
41⁄2
41⁄2
41⁄2
51⁄2
51⁄2
71⁄2
91⁄2
71⁄2
71⁄2
x
x
x
x
x
x
x
x
x
x
10
10
10
10
10
10
10
10
205⁄8
205⁄8
12
15
16
19
23
26
34
41
57
70
490.
510.
684.
798.
899.
1153.
1457.
1596.
2294.
2763.
504.
524.
697.
811.
912.
1166.
1482.
1610.
2306.
2775.
587.
612.
811.
962.
1076.
1381.
1761.
1913.
2750.
3320.
1128.
1128.
1128.
1128.
1533.
1533.
1533.
1533.
1938.
1938.
1368.
1368.
1368.
1368.
1850.
1850.
1850.
1850.
2332.
2332.
1558.
1558.
1558.
1558.
2117.
2117.
2117.
2117.
2662.
2662.
1166.
1166.
1166.
1166.
1571.
1571.
1571.
1571.
1976.
1976.
6679.
6679.
6679.
6679.
9048.
9048.
9048.
9048.
11406.
11406.
1444.
1444.
1444.
1444.
1951.
1951.
1951.
1951.
2458.
2458.
3599.
3599.
3599.
3599.
4879.
4879.
4879.
4879.
6159.
6159.
2585.
2585.
2585.
2585.
3510.
3510.
3510.
3510.
4423.
4423.
6000
6500
5000
5500
UH360CV
UH365CV
91⁄2 x 205⁄8
91⁄2 x 205⁄8
85
98
3320.
3485.
3346.
3497.
3992.
4182.
1938.
1938.
2332.
2332.
2662.
2662.
1976.
1976.
11406.
11406.
2458.
2458.
6159.
6159.
4423.
4423.
14
18
19
23
28
30
42
61
70
86
105
122
646.
735.
899.
1013.
1229.
1482.
1799.
2319.
2990.
3624.
4436.
4790.
659.
747.
912.
1038.
1242.
1495.
1812.
2332.
3003.
3637.
4448.
4802.
1153.
887.
1076.
1229.
1469.
1774.
2166.
2788.
3586.
4347.
5322.
5740.
1381.
1381.
1381.
1381.
1888.
1888.
1888.
1888.
2268.
2268.
2268.
2268.
1673.
1673.
1673.
1673.
2281.
2281.
2281.
2281.
2737.
2737.
2737.
2737.
1901.
1901.
1901.
1901.
2559.
2559.
2559.
2559.
3041.
3041.
3041.
3041.
1419.
1419.
1419.
1419.
1938.
1938.
1938.
1938.
2319.
2319.
2319.
2319.
6944.
6944.
6944.
6944.
7489.
7489.
7489.
7489.
13712.
13712.
13712.
13712.
1520.
1520.
1520.
1520.
2155.
2155.
2155.
2155.
3523.
3523.
4169.
4169.
3662.
3662.
3662.
3662.
4638.
4638.
4638.
4638.
7693.
7693.
9618.
9618.
2585.
2585.
2585.
2585.
3510.
3510.
3510.
3510.
4423.
4423.
4423.
4423.
4-Pole Full Neutral
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
6000
6500
800
1000
1000
1200
1350
1600
2000
2500
4000
4500
5000
5500
UH508CV
UH510CV
UH512CV
UH513CV
UH516CV
UH520CV
UH525CV
UH530CV
UH540CV
UH550CV
UH560CV
UH565CV
41⁄2
41⁄2
41⁄2
41⁄2
51⁄2
51⁄2
71⁄2
71⁄2
71⁄2
71⁄2
91⁄2
91⁄2
x
x
x
x
x
x
x
x
x
x
x
x
10
10
10
10
10
10
10
10
205⁄8
205⁄8
205⁄8
205⁄8
“M” Rating / Standard Rating
Conversion Table
1000/A Square Inch
“M” Rating
225
400
600
800
1000
1200
1350
1600
2000
2500
3000
4000
14-54
Standard 55°C Rating
XL-U
—
—
800
1200
1350
1600
2000
2500
2500
3000
4000
5000
Note: To form complete catalog number, use basic catalog
number and substitute suffix of required item.
Example: Basic busway Catalog Number U316CV—
accessory switchboard stub with ground bus
U316CVSG.
To price complete device, add the following feeder busway
footage to the labor charges shown:
XL-U Elbow 2' XLU-EXP Section 4'
XL-U Tee 3'
XL-U SWBD Stub 1'
XL-U Cross 4' XL-U Reducer 4'
List
prices are for standard construction for higher short
circuit rating add an “HH” after the “U” (UHH302CBP
and add 45% to the list price. Consult sales office for
available ratings.
For elbows other than 90°, accessory charge is doubled.
Switchboard stub includes flange to cover cutout in top of
indoor switchboard and 8'' of bus inside switchboard.
Connecting hardware supplied by switchboard manufacturer.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Ventilated
XL-U busway has two ratings; see above for
edgewise or flatwise mounting. XL-U also comes in
nonventilated housing; consult local sales office.
Transformer throat connection includes gasketed box
sized to match throat plus flexible straps and bolts.
No Busway footage is included. For connection to
transformers not manufactured by Siemens, consult
factory.
Ventilated busway has aluminum ground bus as
standard. For copper ground bus multiply footage price
by 1.05.
Discount Schedule BUSW
Busway Systems
XL-U® Copper (225–6500 Amperes)
Selection
225–6500 Amperes / 600 Volts or Less
Non-Ventilated 225– 600 Amperes
Accessory Charge $
Non
Fusible
Ampere Fusible
Rating
Reducer Reducer
Complete Device Price $
Expansion Tap Box
Section
End
Center
Suffix J
Suffix B Suffix M
Wall Flange
Floor Support
Hangers
End Closure
Catalog List
Catalog List
Catalog List
Draft
Weather Catalog List
Number Price $ Number Price $ Number Price $ Barrier Stop
Number Price $
3-Pole
225
400
600
—
735.
735.
—
3003.
3003.
1850.
2103.
2103.
1381.
2078.
2965.
1267.
1267.
1267.
UF145
UF145
UF145
226.00 UFS145
226.00 UFS145
226.00 UFS145
422.00 UE145
422.00 UE145
422.00 UE145
293.00
293.00
293.00
414.
414.
414.
823.
823.
823.
UH145
UH145
UH145
65.00
65.00
65.00
2205.
2509.
2509.
1698.
1863.
2002.
1482.
1482.
1482.
UF145
UF145
UF145
226.00 UFS145
226.00 UFS145
226.00 UFS145
422.00 UE145
422.00 UE145
422.00 UE145
293.00
293.00
293.00
414.
414.
414.
1038.
1038.
1038.
UH145
UH145
UH145
65.00
65.00
65.00
4-Pole Full Neutral
225
400
600
—
874.
874.
—
3573.
3573.
Ventilated 800–6500 Amperes with Ground Bus
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
6000
6500
1026.
1026.
1026.
1026.
1394.
1394.
1394.
1394.
1761.
1761.
1761.
1761.
4322.
4322.
4322.
4322.
5854.
5854.
5854.
5854.
7388.
7388.
7388.
7388.
3092.
3092.
3092.
3092.
4182.
4182.
4182.
4182.
5271.
5271.
5271.
5271.
3180.
3180.
4245.
4245.
4423.
4423.
4423.
4423.
4701.
4701.
4701.
4701.
1330.
1330.
1330.
1330.
1723.
1723.
1723.
1723.
6679.
6679.
6679.
6679.
UF145
UF145
UF145
UF145
UF155
UF155
UF175
UF195
UF275
UF275
UF295
UF295
226.00
226.00
226.00
226.00
226.00
226.00
323.00
323.00
1103.00
1103.00
1103.00
1103.00
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS179
UFS179
UFS279
UFS275
UFS279
UFS279
422.00
422.00
422.00
422.00
422.00
422.00
506.00
506.00
709.00
709.00
709.00
709.00
UE145
UE145
UE145
UE145
UE155
UE155
UE175
UE195
UE275
UE275
UE295
UE295
293.00
293.00
293.00
293.00
293.00
293.00
715.00
715.00
1147.00
1147.00
1147.00
1147.00
414.
414.
414.
414.
414.
414.
496.
496.
697.
697.
697.
697.
887.
887.
887.
887.
887.
887.
1280.
1280.
1685.
1685.
1685.
1685.
UH145
UH145
UH145
UH145
UH155
UH155
UH175
UH195
UH275
UH275
UH295
UH295
65.00
65.00
65.00
65.00
65.00
65.00
80.00
80.00
96.00
96.00
96.00
96.00
800
1000
1200
1350
1600
2000
2500
3000
4000
5000
6000
6500
1178.
1178.
1178.
1178.
1596.
1596.
1596.
1596.
2027.
2027.
2027.
2027.
4968.
4968.
4968.
4968.
6729.
6729.
6729.
6729.
8491.
8491.
8491.
8491.
3548.
3548.
3548.
3548.
4815.
4815.
4815.
4815.
6058.
6058.
6058.
6058.
3662.
3662.
3662.
3662.
5082.
5082.
5082.
5082.
7034.
7034.
7034.
7034.
1571.
1571.
1571.
1571.
2090.
2090.
2090.
2090.
9353.
9353.
9353.
9353.
UF145
UF145
UF145
UF145
UF155
UF155
UF175
UF195
UF275
UF275
UF295
UF295
226.00
226.00
226.00
226.00
226.00
226.00
226.00
226.00
1103.00
1103.00
1103.00
1103.00
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS179
UFS179
UFS279
UFS279
UFS279
UFS279
422.00
422.00
422.00
422.00
422.00
422.00
506.00
506.00
709.00
709.00
709.00
709.00
UE145
UE145
UE145
UE145
UE155
UE155
UE175
UE195
UE275
UE275
UE295
UE295
293.00 414.
293.00 414.
293.00 414.
293.00 414.
293.00 414.
293.00 414.
715.00 496.
715.00 496.
1147.00 697.
1147.00 697.
1147.00 1026.
1147.00 1026.
1128.
1128.
1128.
1128.
1128.
1128.
1648.
1648.
2014.
2014.
2014.
2014.
UH145
UH145
UH145
UH145
UH155
UH155
UH175
UH195
UH275
UH275
UH295
UH295
65.00
65.00
65.00
65.00
65.00
65.00
80.00
80.00
96.00
96.00
96.00
96.00
For inches / millimeters conversion, see Application Data
Section.
For
reducer, consult page 14-2 (J). On fusible reducers
no fuses are supplied.
boxes furnished with standard screw-type
mechanical lugs. For compression lugs add 30% to list
price.
Floor
and ceiling flanges are ordered by description.
Price the same as wall flanges.
For rod-hanger adapter UJ100 see page 14-51.
Tap
Discount Schedule BUSW
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-55
BUSWAY
SYSTEMS
3-Pole
14
Ampere
Accessory Charge $
Complete Device Price $
Rating
Wall Flange
Floor Support
End Closure
Hangers
EdgeNon
Expansion Tap Box
wise
Fusible Fusible Section
End
Center
Catalog List
Catalog List
Catalog List
Draft
Weather Catalog List
Reducer Reducer
Suffix J
Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop
Number Price $
Busway Power Distribution
XJ-L™ Plug-In Units
Selection
XQ Circuit Breaker Enclosures
Front Operable
Enclosures Only
Breaker
Type
AC
Volts
QP and BQ
120/240
3-Phase, 3-Wire
3-Phase, 4-Wire
Breaker
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
15–50
15–50
XQ35
XQ35R
184.00
264.00
XQ45
XQ45R
198.00
288.00
Circuit Breaker Bus Plugs — Front Operable
Operable Through Cover
14
Circuit Breaker Enclosure XQ45
3-Phase, 3-Wire
3-Phase, 4-Wire
Enclosure Only
Enclosure Only
Breaker
Breaker AC
Ampere Catalog
Type
Volts Rating Number
ED2
240
15–50
60–100
ED4
480
15–50
60–100
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Price $
XEC3100 408.00 XEC3100IG 461.00 XEC4100 517.00 XEC4100IG 570.00
BUSWAY
SYSTEMS
Circuit Breaker Plugs — Floor Operable
Breaker AC
Type
Volts
ED2
240
ED4
480
ED6
600
3-Phase, 3-Wire
3-Phase, 4-Wire
Breaker
Enclosure Only
Enclosure Only
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
XLEC3100
649.00
XLEC4100
794.00
15–50
60–100
15–50
60–100
15–50
60–100
Fusible Vacu-Break Switch Plugs
Floor Operable
Circuit Breaker Bus Plug
(Receptacles and covers
supplied by installer)
XQ45R
3-Pole
Volts
240
600
Ampere
Rating
Catalog Number
Catalog Number
List Price $
XLVB321
706.00
XLVB421N
880.00
60
XLVB322
775.00
XLVB422N
902.00
100
XLVB323
1181.00
XLVB423N
1320.00
30
XLVB351
775.00
XLVB451N
915.00
60
XLVB352
845.00
XLVB452N
949.00
100
XLVB353
1203.00
XLVB453N
1355.00
XEQH
14-56
List Price $
30
For inches / millimeters conversion, see Application Data
Section.
Circuit Breaker Bus Plug
Front-operable
XEC4100
4-Pole
floor-operating handle with “ON-OFF” labels,
$44.50 each. Designed for 2 or 3-pole breakers only.
Standard package 10 per carton.
Ground kit for bonded ground Catalog Number W62890.
List price $56.00.
Ground kit for isolated ground Catalog Number W68101.
List price $59.00.
XQ plug designed for 1, 2 or 3-pole breakers use.
Enclosures available from stock. For factory installed
breakers, add enclosure and breaker prices together and
add 20% to the total. When ordering circuit breaker bus
plugs complete with breaker, factory-installed, allow
time for assembly and SPECIFY enclosure frame size,
phase and ampere rating.
Example: One XEC3100—ED2—3P—70A—factoryassembled.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
“On-Off”
bus plug, pressure-sensitive labels, W47185:
$6.20 per pair.
Ground kit bonded ground Catalog Number W62891.
List price $56.00.
W63810 required when used on “XL” busway list price
$16.20.
Breaker cover for XQ Bus Plugs, XQBRKCVR: List Price
$57.00.
Discount Schedule BPLU
Busway Power Distribution
XL-X®, XL-U®, BD® Plug-In Units
Selection
Circuit Breaker Plugs
Floor Operable
3-Phase, 3-Wire
3-Phase, 4-Wire
Enclosure Only
Enclosure Only
Catalog
Number
XL-X
Catalog
Number
XL-U
Catalog Number
List
BD
Price $ Plug-In
REC3100G
UEC3100G
833.00 BEC3100
671.00 REC4100G
UEC4100G
995.00
BEC4100
822.00
RFC3250G
UFC3250G
1748.00 BFC3250
1562.00 RFC4250G
UFC4250G
2025.00
BFC4250
1828.00
RJC3400G
UJC3400G
4270.00 BJC3400
4039.00 RJC4400G
UJC4400G
4758.00
BJC4400
4886.00
LXD6
450–600 RLC3600G
ULC3600G
4514.00 BLC3600
4191.00 RLC4600G
ULC4600G
5058.00
BLC4600
4990.00
LD6
250–600
UMC3800G
5266.00 BMC3800
5012.00 RMC4800G
UMC4800G
5994.00
BMC4800
5792.00
Breaker
Type
AC
Ampere
Volts Rating
ED2
240
15–60
70–100
ED4
480
15–60
70–100
List
Price $
Catalog
Number
XL-X
Catalog
Number
XL-U
Catalog Number
BD
Plug-In
List
Price $
List
Price $
15–60
70–100
ED6
FD6, FXD 600
JXD6
70–250
200–400
JXD2
240
JD6
200–400
200–400
BUSWAY
SYSTEMS
400–600 RMC3800G
700–800
MD6
I-T-E Fusible Vacu-Break® Switch Plugs Floor-Operable with Line Terminal Protection
Ampere
Rating
030
060
100
Volts
250 AC
or
250 DC
200
400
600
030
060
100
200
400
400
600
600 AC
3-Phase, 3-Wire
Horsepower
Ratings
Catalog
Standard
Maximum
(NEC)
(Time Delay)
003
0071⁄2
0071⁄2
015
015
030
025
060
050
125
075
200
0071⁄2
020
015
050
030
075
060
150
125
350
125
350
200
500
Catalog Number
XL-X
RV321G
RV322G
RV323G
RV324G
RV325G
RV326G
RV361G
RV362G
RV363G
RV364G
RV365G
RV365SG
RV366G
Fuse Adapter Kits — RV and UV
240V AC/250V DC
Class “J”
Amper- Catalog
age
Number
30
60
100
200
400
600
W49813
List
Price $
—
—
—
—
—
459.00
W49813
—
—
—
—
—
459.00
Class “T”
Catalog List
Number Price $
—
—
TFAK32 76.00
TFAK42 102.00
TFAK52 102.00
TFAK62 120.00
Class “R”
Catalog
Number
W56626
W56628
W55365
W55366
W55367
W55368
List
Price $
72.00
91.00
61.00
61.00
91.00
91.00
W56627
W56629
W55365
W55366
W55367
W55368
101.00
85.00
61.00
61.00
91.00
91.00
TFAK35
TFAK45
TFAK55
TFAK65
—
—
120.00
143.00
151.00
174.00
Grounding
Finger — See table.
available from stock. For factory installed
breakers, add enclosure and breaker prices together and
add 20% to the total. When ordering circuit breaker bus
plugs complete with breaker, factory-installed, allow
time for assembly and SPECIFY enclosure frame size,
phase and ampere rating.
Example: One UEC3100—ED4—3P—70A–factory
assembled
Bus plugs 400A and smaller require one plug-in
opening. 600–800A require two plug-in openings.
Enclosures
Discount Schedule BPLU
List
Price $
873.00
950.00
1376.00
2225.00
5569.00
8051.00
950.00
1017.00
1398.00
2359.00
5938.00
5938.00
7996.00
List
Price $
763.00
822.00
1251.00
2118.00
5486.00
7604.00
822.00
891.00
1274.00
2246.00
5856.00
—
7662.00
3-Phase, 4-Wire
Horsepower
Ratings, AC
Standard
Maximum
(NEC)
(Time Delay)
003
0071⁄2
0071⁄2
015
015
030
025
060
050
125
075
200
005
015
015
030
025
060
050
125
100
150
100
150
150
400
Field Addable Ground Kits for
BD Bus Plugs
Fusible
600V
30
60
100
200
400
600
XL-U
UV321G
UV322G
UV323G
UV324G
UV325G
UV326G
UV361G
UV362G
UV363G
UV364G
UV365G
UV365SG
UV366G
Catalog
Number
BD
Plug-In
BOS14321
BOS14322
BOS14323
BOS14324
BOS14325
BOS14326
BOS14351
BOS14352
BOS14353
BOS14354
BOS14355
—
BOS14356
Ampere
Rating
30–60
100
200
400
600
Catalog
Number
W63231
W63232
W63233
W63234
W63234
List
Price $
109.00
154.00
154.00
173.00
173.00
Circuit Breaker
BEC
W63553
173.00
BFC
W63554
173.00
BJC
W63238
263.00
BLC
W63238
263.00
BMC
W73534
168.00
Note: These are for use on busway with internal ground
bus manufactured after March, 1986. For ground kits
prior to this date, consult local sales office.
To
order 400A fusible plug with increased wire space,
add “S” to the catalog number.
Example: UV365SG, UV465SG.
Channel Spacers — Must be used with bus plugs
mounted on 600, 800, or 1000 ampere ABD busway or
on 800 or 1000 ampere BDP busway. Catalog Number
W37940 list price $8.90
14
600
Catalog Number
XL-X
RV421G
RV422G
RV423G
RV424G
RV425G
RV426G
RV461G
RV462G
RV463G
RV464G
RV465G
RV465SG
RV466G
XL-U
UV421G
UV422G
UV423G
UV424G
UV425G
UV426G
UV461G
UV462G
UV463G
UV464G
UV465G
UV465SG
UV466G
List
Price $
1017.00
1040.00
1510.00
2539.00
6240.00
8230.00
1063.00
1096.00
1554.00
2605.00
6397.00
6397.00
8287.00
Catalog
Number
BD
Plug-In
BOS16421
BOS16422
BOS16423
BOS16424
BOS16425
BOS16426
BOS16451
BOS16452
BOS16453
BOS16454
BOS16455
—
BOS16456
List
Price $
937.00
961.00
1389.00
2431.00
6437.00
8463.00
971.00
1007.00
1424.00
2500.00
6599.00
—
8521.00
Fuse Adapter Kits — BOS
240V AC/250V DC
Amperage
30
60
100
200
400
600
Class “J”
Catalog List
Number Price $
—
—
W49827 131.00
W49819 131.00
W49814 330.00
W49813 459.00
Class “T”
Catalog List
Number Price $
—
—
TFAK32 76.00
TFAK42 102.00
TFAK52 102.00
TFAK62 120.00
Class “R”
Catalog
Number
W56626
W56628
W55365
W55366
W55367
W55368
W49832
W49830
W49828
W49818
W49816
W49815
W56627 101.00
W56629 85.00
W55365 61.00
W55366 61.00
W55367 91.00
W55368 91.00
List
Price $
72.00
91.00
61.00
61.00
91.00
91.00
600V
30
60
100
200
400
600
163.00
163.00
131.00
163.00
395.00
330.00
TFAK35
TFAK45
TFAK55
TFAK65
—
—
120.00
143.00
151.00
174.00
When
BD busway capacity exceeds 400A for aluminum
or 600A for copper, capacity must be specified to obtain
proper number and arrangement of neutral fingers.
Not required.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-57
Busway Power Distribution
XL-X®, XL-U® and BD® Plug-In Units
Selection
Shipping Weights — Pounds
For Circuit Breaker Bus Plugs Only
Breaker
Type
Ampere
Rating
Shipping Weights — Pounds
For Fusible Switch Bus Plugs Only
3-Phase, 3-Wire
3-Phase, 4-Wire
3-Phase, 3-Wire
3-Phase, 4-Wire
Enclosure
Only
Enclosure
Only
XL-X
XL-U
BD, LO-X
XL-X
XL-U
BD, LO-X
Switch
Ampere
Rating
Prefix
RV
UV
Prefix
BOS
Prefix
RV
UV
Prefix
BOS
30,60
100
200
400
600
17
17
36
165
165
15
18
34
111
111
19
19
38
160
170
12
18
36
112
112
Complete
Assembly
Complete
Assembly
XL-U BD,
XL-U BD,
XL-U BD,
XL-U BD,
XL-X LO-X XL-X LO-X XL-X LO-X XL-X LO-X
15–100
12
14
13
9
13
15
14
10
FD6
70–250
1
27
51
37
45
28
55
38
JXD6
JXD2
JD6
200–400
200–400
200–400
90
90
95
35
35
39
102
102
117
57
57
61
95
95
100
36
36
40
107
107
122
58
58
62
LXD6
LD6
450–600
450–600
140
140
39
39
175
175
691
61
147
147
40
40
182
182
62
62
MD6
400–800
140
79
175
114
147
80
182
115
Special Bus Plugs
Catalog Number
Description
Ground Detector and Potentializer–
For 2 or 3-pole 240 and 480 Volt service.
14
ED2,
ED4,
ED6
XL-U
XL-X
BD, LO-X List Price $
UPGR314G RPGR314G
PGR6314 1137.00
BUSWAY
SYSTEMS
Accessories
Description
Channel Spacers–Must be used with Bus Plugs or Plug-in
Branch-Run Adapters mounted on 600-, 800- or 1000-ampere
ABD Busway or on 800- or 1000-ampere BDP Busway.
4 per package
“ON-OFF” Bus Plug Stickers –
Pressure sensitive, per pair.
Catalog
Number
List
Price $
W37940
8.90
W47185
6.20
BD Bus Plug Catalog Number Reference
Catalog
Number
ABD4 Busway
225
400
ABD402 ABD404
BJC44001
—
BJC44002
—
BJC4400G1
—
BJC4400G2
—
—
⻫
BFC46001
—
—
BFC46002
—
—
BFC4600G1
—
—
BFC4600G2
—
—
BMC48001
—
—
BMC48002
—
—
BMC4800G1
—
—
BMC4800G2
—
—
BOS164251
—
BOS164252
—
—
⻫
BOS16425G1
—
BOS16425G2
—
—
⻫
BOS164261
—
—
BOS164262
—
—
BOS16426G1
—
—
BOS16426G2
—
—
BOS164551
—
BOS164552
—
—
⻫
BOS16455G1
—
BOS16455G2
—
—
⻫
BOS164561
—
—
BOS164562
—
—
BOS16456G1
—
—
—
⻫
BOS16456G2
—
—
—
14-58
—
⻫
600
ABD406
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
800
ABD408
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
1000
ABD410
⻫
1200
ABD412
⻫
BDP4 Busway
225
400
BDP402 BDP404
—
600
BDP406
800
BDP408
1000
BDP410
—
⻫
—
⻫
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
⻫
—
—
—
⻫
—
—
—
⻫
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
⻫
—
—
—
—
⻫
—
⻫
—
—
—
—
⻫
—
⻫
—
—
—
—
⻫
—
⻫
—
—
—
—
⻫
—
⻫
—
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
⻫
—
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
—
—
⻫
—
⻫
—
⻫
—
—
—
—
—
—
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
—
⻫
—
⻫
—
⻫
—
—
—
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1350
BDP413
⻫
1600
BDP416
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
⻫
—
—
Discount Schedule BPLU
Busway Power Distribution
XL-X ® , XL-U®, BD® Cubicles
Selection
Cubicles
Molded Case Circuit Breakers
(For Use With All Types of Busway)
List Price $ — With Breaker
Breaker
Type
Ampere
Rating
3-Phase, 4-Wire
120/280V AC
277/480V AC
3-Phase
600V AC
ET Heavy Duty
JD6
200–400
13433.
14093.
MD6
400–600
700–800
22939.
23496.
24092.
24675.
PD6
800
1000
1200
1400
1600
26867.
29097.
34129.
37488.
38045.
28135.
30543.
35840.
39364.
39947.
RD6
1800
2000
43634.
44763.
45826.
46993.
150–225
250–400
19947.
22939.
20948.
24079.
CLD6
450–600
38895.
40833.
CMD6
400–800
39895.
41885.
CPD6
800
1000
1200
1400
1600
40884.
44877.
51860.
53051.
53849.
42937.
47120.
54457.
55712.
56548.
CRD6
1800
2000
56447.
56840.
59273.
59692.
CJD6
14
Current-Limiting
BUSWAY
SYSTEMS
Note: Additional molded case circuit breakers not listed may be used.
Consult local sales office for availability.
Fusible Switch — Vacu-Break®
Bolted Pressure Switches
3-Phase, 3-Wire
3-Phase, 4-Wire
250
Volts AC
600
Volts AC
120/208
Volts AC
Ampere 480 Volts AC
Rating
3-Pole
4-Pole
277/480
Volts AC
Ampere
Rating
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
200
400
600
800
1200
FC3022
FC3042
FC3062
—
—
8351.00
9593.00
11266.00
—
—
FC3025
FC3045
FC3065
FC3085
FC3125
9010.00
10367.00
12166.00
19200.00
23370.00
FC4022
FC4042
FC4062
—
—
9809.00
11280.00
13243.00
—
—
FC4025
FC4045
FC4065
FC4085
FC4125
10594.00
12179.00
14295.00
22558.00
27464.00
Power Circuit Breaker
Breaker
Frame
Size
Maximum
Ampere
Rating
600 Volts AC
3-Pole
4-Pole
800
28613.
29185.
30330.
30901.
1200
32905.
33562.
34878.
35538.
1600
35765.
36481.
37912.
38627.
2000
42919.
43777.
45493.
46352.
2500
51504.
52532.
54593.
55624.
3000
65809.
67126.
69758.
71073.
4000
94422.
96311.
100087. 101975.
No fuses supplied with fusible cubicles.
AC Interrupting Capacity
Symmetrical (RMS) Amperes
List Price $
With Breaker
240 Volt
480 Volt
600 Volt
3-Phase,
3-Wire
3-Phase,
4-Wire
30,000
50,000
65,000
65,000
85,000
30,000
50,000
65,000
65,000
85,000
30,000
50,000
65,000
65,000
85,000
39541.
69210.
75534.
158190.
237286.
43495.
76130.
83086.
174007.
261011.
200,000
200,000
200,000
200,000
200,000
200,000
200,000
200,000
200,000
57347.
197731.
276827.
63075.
217502.
304506.
Type RL
RL-800
RL-1600
RL-2000
RL-3200
RL-4000
800
1600
2000
3200
4000
Type RLF (Fused)
RL-800
RL-3200
RL-4000
800
3200
4000
Cubicle
pricing includes labor and material for:
1. Single cubicle frame section complete with required
busway openings.
2. Circuit breaker or fusible switch.
3. Mounting of circuit breaker or fusible switch and
line-side connections.
Figure busway footage through cubicle to compensate
for load-size connections.
For other options, consult local sales office.
For
Discount Schedule BUSW
electrically operated, specify control voltage.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-59
Busway Mobile Industrial Power
Industrial Trol-E Duct ®
Selection / Dimensions
General
2 and 3-Pole
100/150 Amperes
600 Volt AC, 250 Volt DC
Standard Duty TD310
Catalog
Number
List
Price $
Ship.
Weight
(lbs.)
TD210
TD310
1001.00
1128.00
40
40
2-pole, 10 foot
2-pole, 10 foot — sectionalizing
TD210R
TD210RS
1204.00
1432.00
45
45
3-pole, 10 foot
TD310R
1357.00
45
3-pole, 10 foot — sectionalizing
TD310RS
1614.00
45
TD010
TD010R
800.80
963.20
36
36
Hanger — 2 and 3-pole
Intermediate Hanger
End Plate
Feed-In Adapter — 2 and 3-pole
TDH3
TRH31
TRB23
TDF3
79.00
43.00
53.00
150.00
04
01
003⁄4
04
Insulated Ramp Ends (pair)
—
510.00
—
W43771
—
W43101
70.00
—
132.00
05
04
001⁄2
W43100
53.00
01
W43099
130.00
01
Description
Standard Straight Busway Sections
2-pole, 10 foot
3-pole, 10 foot
Drop-Out Sections
Busless Busway And Drop-Out Sections
BUSWAY
SYSTEMS
14
10 foot busway
10 foot drop-out
Accessories (Complete Assemblies)
Replacement Parts
Cover for standard hanger
(contains 10 pieces)
Hanger with cover (see TDH3)
Bus Connector (contains 12 pieces)
Feed-In Connector (top)
(contains 2 pieces)
Feed-In Connector (side)
(contains 4 pieces)
(All dimensions in inches)
For inches / millimeters conversion, see Application Data
Section.
Busway rating is 100A continuous and 150A intermittent.
Note: All busway sections, regardless of length, include:
1 hanger, 1 hanger cover, 1 set of bus connectors.
Recommended loads not to exceed 25 pounds.
UL listed.
14-60
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Straight Duct Sessions Less
Than 10 Feet
For each straight busway section less
than 10 feet long:
1. Use base price of $228. list to cover
special construction.
2. Take list price of standard 10-foot
section of type required and prorate
for footage price, figuring fractions to
the next larger number of even feet,
as shown below:
Example:
Required: 4 feet of 3-pole Trol-E-Duct,
100/150 ampere type.
Base price to cover special
construction . . . . . . . . . . . . . . . . .$228.
Footage price ($112.00/foot) prorated
from TD310 . . . . . . . . . . . . . . . . . .$448.
List price for 4 feet of 3-pole extra
footage . . . . . . . . . . . . . . . . . . . . .$676.
Special Curved Duct Sections
Curved busway sections should be
figured on basis of $ 120. list per linear
foot, plus $2090. set-up and
engineering charge for each curved
section. Any change of direction
constitutes a curve and should be
priced as above.
Exceptions:
1. On a circle, 2 set-up charges will
apply.
2. When 2 or more identical curves
are required on a job, apply only
one set-up charge to each group
of identical curves.
To find the linear footage of special
curves of any number of degrees
and any radius, use the formula
shown below:
2R x 3.1416 x D =L
360
R = Radius in feet
D = Degrees
of curve
L = Length of curve
Example:
Required: The length of a 75° curve
with a radius of 51⁄2 feet.
2 x 5.5 x 3.1416 x 75 =7.199 feet
360 (charge for 8 feet).
Fractions are figured to the next larger
number of even feet, as price is always
based on full linear feet.
Flared Ends
List price for each flared end on any
straight or curved busway section $476.
Special feed-in (required for busway
sections with two flared ends) . . .$234.
Discount Schedule BUSW
Busway Mobile Industrial Power
Industrial Trol-E Duct ® / Trolleys, Tool Hangers
Selection / Dimensions
2 and 3-Pole Non-Fusible
600V AC and 250V DC
Trolley
Type
Number
Minimum
of
Maximum Radius
Catalog
Poles
Amperes (feet)
Number
List
Price $
Ship.
Weight
(lbs.)
Standard Trolley
T331
Trolleys Only
Standard
2
30
5
T131
399.00
4
Standard
3
30
5
T331
406.00
4
Curve
2
60
3
T134
716.00
5
Curve
3
60
3
T334
805.00
5
Heavy Duty 2
60
5
TR1311
478.00
4
Heavy Duty 3
60
5
TR3311
530.00
4
Roller
20
5
TR1312
364.00
4
2
3
20
5
TR3312
406.00
4
Transfer
2
30
2
T25
1241.00
7
Transfer
3
30
2
T35
1308.00
7
Button
2
60
5
T132
649.00
5
Button
3
60
5
T332
659.00
5
14
Roller
Heavy Duty Trolley
TR331-1
Trolleys Box Hangers
—
—
—
TPTH
223.00
5
—
—
—
TBTH
Unit
292.00
6
Box Tool Hanger With SAF To Fuse
30A 240V AC 250V DC
TBTH302F
455.00
7
30A 600V AC
TBTH306F
760.00
8
TBTH202R
628.00
7
Roller Type Trolley
TR331-2
Box Tool Hanger With Receptacle
20A 240V AC 250V DC
Cleaning Trolleys
Abrasive
3
—
5
ACT331
705.00
4
Brush
3
—
5
BCT331
705.00
4
Transfer Type Trolley
T35
Note: When trolleys are used with auxiliary equipment that has a lower rating, the rating
of the auxiliary device will govern the rating of the trolley. For example: heavy-duty
trolleys (maximum 60A) used with box tool hangers having SAFtoFUSE units are
limited by the fuse size to a rating of 30A. Also, trolleys used with box tool hangers
having receptacles are limited by the receptacles’ rating to a rating of 20A, 480V AC
or 250V DC.
Button Type Trolley
T332
Plain Tool Hanger
Box Tool Hanger
For
90A heavy duty trolleys, 2 or 3-pole, add $102. to list
price above.
and box tool hangers are not designed for use
with curve or transfer type trolleys. They are for
assembly only on standard, heavy-duty, roller or button
trolleys.
Plain
Discount Schedule BUSW
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-61
BUSWAY
SYSTEMS
Plain
Tool
Busway Mobile Industrial Power
Industrial Trol-E Duct ®
Selection / Dimensions
4-Pole
100/150 Amperes 햲
480 Volt AC, 250 Volt DC
Standard Duty TD410
Catalog
Number
Description
Ship.
Weight
(lbs.)
List
Price $
Standard Straight Busway Sections
TD410
���
44
4-pole, 10 foot
TD410R
���
49
4-pole, 10 foot — sectionalized
TD410RS
���
Hanger — 4-pole
Intermediate Hanger
End Plate
Feed-In Adapter — 4-pole
TDH4
TRH31
TRB23
TDF4
���
Insulated Ramp Ends (pair)
—
���
T431
���
W43771
—
W43101
���
4-pole, 10 foot
���
���
���
4-Pole Trolley
30A 4-pole Button Trolley
Replacement Parts
W43099
���
BE
W43100
���
41⁄4
1
3
⁄4
41⁄4
—
4
5
4
⁄2
1
���
1
���
1
TO
Cover for standard hanger
(contains 10 pieces)
Hanger with cover (see TDH4)
Bus Connector (contains 12 pieces)
Feed-In Connector (top)
(contains 2 pieces)
Feed-In Connector (side)
(contains 4 pieces)
49
AV
AI
LA
BI
LI
TY
BUSWAY
SYSTEMS
14
Busway Accessories (Complete Assemblies)
AN
N
O
U
N
CE
D
Drop-Out Sections
(All dimensions in inches)
For inches / millimeters conversion, see Application Data
Section.
햲 Busway
햳 See
rating is 100A continuous and 150A intermittent.
Electronic Pricing.
14-62
Note: All busway sections, regardless of length, include:
1 hanger, 1 hanger cover, 1 set of bus connectors.
Recommended loads not to exceed 25 pounds.
UL listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule BUSW
15SPEEDFAX
TM
2007-2008 Motor Control Centers
Contents
TIASTAR™ Motor Control Center
Product Overview
Technical / Dimensions
15-2 – 15-5
15-6 – 15-10
Motor Control Center Replacement Units
Aftermarket Overview
15-11 – 15-14
15
MOTOR CONTROL
CENTERS
Residential Commercial Industrial
TIASTAR™ Motor Control Center
MOTOR CONTROL
CENTERS
15
Overview of TIASTAR
Siemens Energy & Automation
introduces the TIASTAR (tie-star) Motor
Control Center to meet the growing
needs of our consumers. The TIASTAR
MCC enhancements have been created
from listening to our customers and
offering a wider selection of options.
Providing the best of Siemens’ proven
motor control centers (MCCs), System
89 and Model 95+, TIASTAR is designed
to be the industry’s leading value.
From its sturdy metal cabinet to the
best-of-breed Siemens technology
within, TIASTAR has no equal. Siemens’
TIASTAR MCC with PROFIBUS-DP
communications combines heavy-duty
industrial construction and user friendly
features to deliver detailed diagnostics
and control by communicating between
MCC units and a PLC or DCS. Unlike
other manufacturers’ network offerings,
Siemens’ offering is non-proprietary and
is designed to simplify, not complicate,
your life. So whatever you need, you
can rest assured that your TIASTAR
MCC can meet your needs.
While we think Siemens’ TIASTAR MCC
is a wise investment, it is important for
you to know that advanced capabilities
can be added any time during the life of
the product. Siemens doesn’t think you
should pay for pre-wiring or design
features that don’t have an immediate
payback.
TIASTAR Motor Control Center
15-2
Product Overview
General Features and Benefits
The most effective means for grouping
low voltage motor starters, associated
control and distribution equipment is
through the use of motor control centers.
Siemens MCCs allow grouping this
equipment in a common sheet steel
enclosure. All 36" motor starter units
(through NEMA Size 5 for FVNR) and
all feeder disconnects through 250
amperes can be mounted with
drawout construction.
All devices within the MCC are powered
from a common horizontal bus and
three phase vertical bus located in each
section. Once installed in its centralized
operating plant location, manual
supervision and monitoring can be
performed safely, and remote
supervision can be provided through
the Siemens ACCESS™ data
communication system.
Domestic Design Standards
The following are the principal domestic
standards which apply to motor control
center design, testing, construction and
application. The TIASTAR Motor Control
Center complies fully with the latest
version of all these standards.
NEMA
AB-1 Molded Case Circuit Breakers
ICS 1 General Standards for Industrial
Control
ICS 2 Standard for Industrial Control
Devices, Controllers and Assemblies
ICS 18 Standard for Motor Control
Centers
UL
845 Motor Control Centers
508 Industrial Control Equipment
891 Switchboard Design
94 Test for Flammability of Plastic
Materials for Parts, Devices, and
Appliances
489 Molded Case Circuit Breakers and
Circuit Breaker Enclosures
991 Tests for Safety-related Controls
Employing Solid-state Devices
NFPA – National Fire Protection
Association
70 National Electrical Code
IEEE
IEEE-STD-693-1997, IEEE
Recommended Design Practice for
Seismic Design of Substations
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Construction Details
Siemens TIASTAR Motor Control Centers
are composed of a number of vertical
sections bolted together. That allows
for future addition of MCC vertical units
so the equipment can expand with
customer needs. The standards structure
is 90 in. (2286 mm) high, plus a 1.125 in.
(29 mm) high channel sill. Front-only
structures can be either 15 in. (381 mm)
or 20 in. (508 mm) deep. Back-to-back
mounted structures are 30 in. (762 mm)
or 40 in. (1016 mm) deep, and consist of
two horizontal and vertical buses. This
allows for correct bus phasing on the
front or rear. Siemens provides a 21 in.
back-to-back design, consisting of a
common horizontal and vertical bus
structure, for applications where
available footprint is limited.
UL Listed Starters
Siemens offers a wide range of UL
Listing for the industry – from NEMA
Size 0 through 6, including reduced
voltage, two-speed, wye-delta and
part-winding type starters.
Drives and Soft Starts
Siemens VFD (variable frequency drives)
and RVSS (reduce voltage solid state
starters) are available in our MCC.
The range for VFD is fractional hp to
300 hp-VT and 1hp to 600 hp for RVSS.
These applications are designed to meet
the robust industrial environment and are
cost effective for today’s market.
Power Monitoring
Siemens line of power meters provides
market leading technology for power
quality measurement. These products
continually change to meet growing
needs for power quality and energy
monitoring. Siemens TIASTAR MCCs
are fully capable of installing any of
Siemens power meters for your needs.
Please review the full line of Siemens
power meters at www.sea.siemens.com.
Overload Protection
Siemens understands customer needs
vary from motor to motor. That is why
we offer 4 lines of overload protection.
For basic needs you can specify bi-metal
ambient compensated overloads. If
single phase is a concern our customers
can specify ESP100, and for the most
advanced motor protection, customers
can consider SIMOCODE overloads that
provide detailed information and control.
TIASTAR™ Motor Control Center
Product Overview
ESP100 Solid State Overloads
ESP100 solid state overload relays are
self powered, requiring no separate
120V source to power the circuit board.
They provide phase loss protection,
fewer connection points and high repeat
trip accuracy which results in longer
motor life and cost savings. NEMA
Class 10, 20 and 30 trip curves are
available for a variety of applications.
The ESP100 solid state overload
provides phase loss protection for the
motor by tripping within three seconds
upon complete loss of one phase of a
three phase motor branch circuit.
Each overload has at least a 2:1 current
adjustment range with the adjustment
dial reading out in full load amps. In
addition to the markings on the dial
there are audible clicks which allow
for extremely fine tuning.
ESP100 overloads can be used on high
voltage applications, making them ideal
for use with vacuum contactors and
other high voltage control.
ESP100 overloads can be retrofitted
on existing contactors using the retrofit
plate suffixes or on other brands using
the plates listed in the competitive
retrofit plates table on page 16-48.
The SIMOCODE Pro consists of two
device series with different levels of
functionality:
SIMOCODE Pro C (Compact)
The compact motor management system
can be used for Full Voltage Nonreversing (FVNR) starters, Full Voltage
Reversing (FVR) starters, and base
overload functionality.
Bimetal Ambient Compensated Overload
SIMOCODE Pro C
CT Module
MOTOR CONTROL
CENTERS
ESP100 panel mounted overloads can be
used to upgrade existing starter
applications where panel mounted
thermal overloads are used. In addition,
ESP100 overloads can be panel mounted
when used with other types of
controllers, such as DP, IEC contactors,
and soft starts.
Thermal Overloads
Bimetal Ambient Compensated
Bimetal ambient compensated overload
relays protect both the motor and
equipment by opening the control circuit
when the motor experiences an overload
condition. The bimetal overload relay may
be set for either manual or automatic
reset and can be supplied with standard
Class 20 heater elements or optional
Class 10 heater elements as required.
An ambient compensated model of the
bimetal overload is available.
15
The heaterless construction of these
overloads minimizes energy costs and
the costs of cabinet ventilation or
cooling. Solid state overloads can be
used at temperatures from – 30°C to
ѿ70°C and are rated for 50Hz and 60Hz
applications.
SIMOCODE Pro
SIMOCODE Pro is the latest generation
of Motor Management System
(“Smart Overload”) bringing a new level
of flexibility and functionality within the
Siemens smart motor control center.
By means of a PROFIBUS DP interface,
it can easily be linked to higher-level
automation systems. SIMOCODE Pro
implements all motor protection and
control functions, determines operational,
diagnostic and statistical data and
organizes the communication between
the automation system and MCC bucket.
Keypad
(Door Mounted)
SIMOCODE Pro V (Variable)
The variable motor management system
has an even greater range of functions,
including voltage and power monitoring
and expandable modules for additional
I/O, as well as temperature and ground
fault protection.
CT Module
Expandable Module
SIMOCODE Pro V
Keypad
(Door Mounted)
Note: For detailed information on the SIMODE Pro please
contact the local Siemens Sales Office.
ESP100 Solid State Overload
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-3
Motor Control Centers
Product Overview
Quality Features Exceed Standards
햷
햸
MOTOR CONTROL
CENTERS
15
햲
햳
햹
햴
햺
햻
햵
햽
햶
15-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Motor Control Centers
Product Overview
햲
For ease in wiring and inspection,
terminal blocks are mounted on a
swing-out side barrier.
햳
A racking lever on all plug-in units
ensures that they are fully engaged
with the vertical bus. An interlock
with the disconnect device ensures
that a plug-in unit is not inserted or
removed from the vertical bus when
the unit is energized.
햴
Copper bus and heavy-duty insulators safely distribute
power to sections. Copper bus, standard throughout, is
conservatively rated at 50-degree rise and provides up to
an optional 100,000A withstand capacity.
A positive stop in the “TEST”
position indicates that a plug-in
unit is fully withdrawn from the
vertical bus.
Pilot devices are mounted on a sturdy
formed-metal panel attached with
two captive screws to the MCC unit
door for easy access to internal
components. For unit removal and
test, the pilot device panel is easily
removed from the door and mountd
on the unit.
햹
A copper clip on plug-in units
engages and grounds units at
all times.
햺
The unit disconnect operating handle
features a simple, rugged design.
“ON” and “OFF” are clearly indicated
by position, color and word. The
“TRIP” indication is clearly displayed
on circuit breaker equipped units.
햻
A screwdriver operated defeater
mechanism allows access to
an energized unit by
authorized personnel.
햽
All doors swing open a minimum
of 110° for easy unit access
and removal.
A positive stop mechanism prevents
the unit from falling out of the
structure during unit removal.
Important Additional Features:
쐍 All wiring and components meet or exceed the
requirements of UL, CSA, ENEMA, EEMAC, and
NEC
쐍 Pre-wired components are professionally harnessed
to industrial terminal blocks
쐍 Full depth wire tie rods are standard in each vertical
wireway
쐍 White interior increases visibility for easy wiring,
maintenance and inspection
쐍 Modular units are fully interchangeable
쐍 Each TIASTAR MCC is designed to satisfy your most
exacting specifications
쐍 White on black base operating handle is easy to
identify
Plug-in unit stab assemblies include
self-aligning stab clips with spring
steel backup springs. Wires from the
stab clips to the line-side of the circuit
breaker or disconnect switch are
contained in the stab housing and are
isolated phase-to-phase until the
wires enter the MCC.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-5
MOTOR CONTROL
CENTERS
햶
햸
Horizontal bus design keeps the bus
in the top 12" of the structure, never
behind units, for easy maintenance
and accessibility.
15
햵
햷
The horizontal bus compartment is
isolated from the horizontal wireways
by a crystal clear polycarbonate
barrier that makes visible and
infrared maintenance inspection
a breeze. The barrier is easily
removed when access to the
horizontal bus is required.
TIASTAR™ Motor Control Centers
Technical / Dimensions
MOTOR CONTROL
CENTERS
15
Dimensions
Height:
91.125 in. (2318 mm)
(Front Mounted Only Structure)
Width:
20 in. (508 mm)
24 in. (610 mm)
30 in. (762 mm)
Depth:
Standard:
15 in. (381 mm)
Optional:
20 in. (508 mm)
Optional:*
31 or 41 in.
(762 or 1016 mm)
*(Front mtd. only structures mtd.
Back-to-Back)
(Back-to-Back structure)
Width:
20 in. (508 mm)
30 in. (762 mm)
Depth:
21 in. (533 mm)
Vertical Wireway Height:
72 in. (1829 mm)
Width:
4 in. (127 mm)
Depth:
10 in. (203 mm)
Cross Section:
38.25 square in.
(972 square mm)
Top Horizontal Wireway
Front Mounted Only and
Back-to-Back Mounted
Height:
12 in. (305 mm)
Depth:
7 in. (178 mm)
Bottom Horizontal Wireway
Front Mounted Only
Height:
6 in. (152 mm)
Depth:
15 in. (381 mm)
20 in. (508 mm)
or Back-to-Back Mounted
Height:
6 in. (152 mm)
Depth:
30 or 40 in.
(762 or 1016 mm)
Structural Gauge Chart
Structural Parts
Divider Sheets . . . . . . . . . . . . . . . . . . . . . . . . .14
Side Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Center Bottom Cross Ties . . . . . . . . . . . . . . . .12
Rear-Channel
(Front Mounting only) . . . . . . . . . . . . . . .13
Channel Sills . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Center-Top Channel . . . . . . . . . . . . . . . . . . . . .13
Vertical Bus Mounting Angles . . . . . . . . . . . . .14
Lifting Angles . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rear Covers . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Top Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
End Covers . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Separator Angles . . . . . . . . . . . . . . . . . . . . . . .12
Shelf Brackets . . . . . . . . . . . . . . . . . . . . . . . . .10
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
ga.
Plating
All power bus, copper tin-plated as std.
Silver plating available by request.
Horizontal Bus
Ampere Ratings
Standard:
Optional:
Vertical Bus
Ampere Ratings
Standard:
Optional:
ga.
ga.
ga.
ga.
ga.
Finish (Ext.) ANSI 61 Light Gray
Electrostatically applied dry powder paint
is standard.
15-6
Cu
Cu
Cu
Cu
Cu
Cu
300A, tin-plated
600A, Cu
Neutral Bus (Bottom Mounted)
Optional:
Full neutral Cu
Optional:
Neutral landing pad
Ratings:
600A to 1600A
Bus Bracing
Standard:
Optional:
42,000A,
65,000A, and
100,000A Sym.
Incoming Line Terminations
Incoming line arrangements are
available in many configurations
from 600A to 2500A.
Barriers
Standard:
Isolation Barrier:
Grounded sheet
steel with stab
openings.
Standard:
Inserts to cover unused
openings in V-bus barrier.
Optional:
Automatic shutter
mechanism.
Ground Bus (Bottom Mounted)
Required for UL labeling
Standard: .25 in. x 1 in. unplated Cu.
Optional ground bus available up to
1200A.
Vertical ground bus available as
option, rating 300A.
Also available with motor ground
terminations.
Weight Table
Dimensions
inches (mm)
H
Unit Parts
Top and Bottom Unit Barriers . . . . . . . . . . . . .14
Back Pan . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Side Barrier Plate . . . . . . . . . . . . . . . . . . . . . . .18
Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
600A, tin-plated
800A,
1200A,
1600A,
2000A,
2500A,
W
20
(508)
20
(508)
91.13
20
(2315) (508)
30
(762)
20
(508)
D
15
(381)
20
(508)
30
(762)
20
(508)
21
(533)
Type
Shipping
Weight
per Section
in lbs. (kg)
550 lbs. (250)
front only
600 lbs. (273)
back-to-back
850 lbs. (386)
front only
800 lbs. (364)
back-to-back
900 lbs. (409)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Wiring Specifications
Control on Units
16 gauge
19 strand bonded copper
105°C – 600V
Interconnection Control Wiring
Between Units
14 gauge
19 strand copper
105°C – 600V
Power Wiring – Sized to suit
maximum HP rating of unit
12 gauge to 2 gauge
19 strand copper
105°C – 600V
1 gauge to 500 MCM
19 strand to 37 strand copper
105°C – 600V
Enclosure Types
NEMA 1 (Standard) – Indoor
NEMA 1A Gasketed – Indoor
NEMA 2 – Drip-proof – Indoor
NEMA 12 – Dust tight – Indoor
NEMA 3R – Rainproof – Outdoor
(Non-walk-in)
MCC Shutter Mechanism
Automatic shutter mechanisms when
specified will be supplied at the stab
in location of each plug-in unit and
requested future space. Unused stab
openings will be covered with snap-in
hole plugs.
Pull Box (Top Hat)
Available in 12 in., 18 in. or 24 in. high;
20 in. or 30 in. wide; 15 in. or 20 in. deep.
Motor Control Centers
Wiring Classifications
Siemens MCC’s are available as either
Class I or Class II assemblies utilizing either
Type A, Type B, or Type C wiring as defined
in NEMA ICS18-2001(3.1) and NEMA
ICS18-2001(3.3). Below are the NEMA
class and type definitions:
Class I-S and II-S — Motor Control
Centers With Custom Drawing
Requirements (NEMA ICS18-2001(3.2.3))
Class I-S and II-S motor control centers
shall be the same as Class I and II except
custom drawings shall be provided in lieu
of standard drawings as specified by the
user. Examples of custom drawings are:
▪ Special identifications for electrical
devices
▪ Special terminal numbering designations
▪ Special sizes of drawings
The drawings supplied by the manufacturer
shall convey the same information as
drawings provided with Class I and II motor
control centers, additionally modified as
specified by the user.
Types of Wiring — NEMA ICS182001(3.3.1)
Type A (NEMA ICS18-2001 (3.3.1.1))
User field wiring shall connect directly to
device terminals internal to the unit and
shall be provided only on Class I motor
control centers.
Type C (NEMA ICS18-2001(3.3.1.3))
User field control wiring shall connect
directly to master terminal blocks mounted
at the top or bottom of those vertical
sections that contain combination motor
control units or control assemblies which
shall be factory wired to their master
terminal blocks. User field load wiring for
combination motor control units, size 3 or
smaller, shall connect directly to master
terminal blocks mounted at the top or
bottom of vertical sections. Motor control
unit load wiring shall be factory wired to the
master terminal blocks. User field load
wiring for combination motor control units
larger than size 3, and for feeder tap units,
shall connect directly to unit device
terminals.
IB-T
IIB
IB-D
Type B (NEMA ICS18-2001(3.3.1.2))
a. Type B user field load wiring for
combination motor control units size 3 or
smaller shall be designated as B-D or B-T,
according to the following:
▪ B-D connects directly to the device
terminals, which are located immediately
adjacent and readily accessible to the
vertical wireway.
▪ B-T connects directly to a load terminal
block in, or adjacent to, the unit.
b. Type B user field load wiring for
combination motor control units larger than
size 3, and for feeder tap units, shall
connect directly to unit device terminals.
c. Type B user field control wiring shall
connect directly to unit terminal block(s)
located in, or adjacent to, each combination
motor control unit.
IIC
IC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-7
MOTOR CONTROL
CENTERS
IA
Class II — Interconnected Units (NEMA
ICS18-2001(3.2.2))
Class II motor control centers shall be the
same as Class I motor control centers with
the addition of manufacturer furnished
electrical interlocking and wiring between
units as specified in overall control system
diagrams supplied by the purchaser. In
addition to the drawings furnished for Class
I motor control centers, the manufacturer
shall furnish drawings that indicate factory
interconnections within the motor control
center.
15
Class I — Independent Units (NEMA
ICS18-2001(3.2.1))
Class I motor control centers shall consist
of mechanical groupings of combination
motor control units, feeder tap units, other
units, and electrical devices arranged in a
convenient assembly. The manufacturer
shall furnish drawings that include:
a. Overall dimensions of the motor control
center, identification of units and their
location in the motor control center,
locations of incoming line terminals,
mounting dimensions, available conduit
entrance areas, and the location of the
master terminal board if required (Type C
wiring only).
b. Manufacturer’s standard diagrams for
individual units and master terminal boards
(Type C wiring only) consist of one or more
drawing(s) that:
1. Identify electrical devices.
2. Indicate electrical connections.
3. Indicate terminal numbering
designations.
Note: When a combination schematic and /
or wiring diagram for a unit is supplied
showing optional devices, the manufacturer
shall provide information to indicate which
devices are actually furnished.
Technical / Dimensions
Motor Control Centers
Starter Ratings and Dimensions
Technical / Dimensions
MCC Starter Ratings and Dimensions
Circuit Breaker Type (For Maximum HP at 460V)
kA
Maximum
Interrupting
Standard
Dimensions in Inches (mm)
Rating
NEMA Horsepower Rating
Breaker
Unit Height
208 V 230 V 460 V Type
W = Width, D = Depth
at 480 V
Size
Full Voltage — UL Listed
7.5
7.5
0-1
15
10
2
30
25
3
50
40
4
5
6
7
—
10
25
50
100
15
42 / 100
MCP
75
100
200
JD6-ETI
36 (914)
72 (1829)
150
200
400
LD6-ETI
48 (1219)
72 (1829)
30W (762W)
—
300
600
ND6
72 (1829)
30W × 20D
(762W × 508D)
Two Speed, Constant
Or Variable Torque — UL Listed
10
7.5
7.5
0-1
15
25
10
2
30
50
25
3
50
100
40
4
MOTOR CONTROL
CENTERS
FVR
18 (457)
24 (610)
30 (762)
36 (914)
IR Std./Opt.
FD6-ETI
FVNR
12 (305)
12 (305)
18 (457)
24 (610)
—
MCP
FD6-ETI
5
75
100
200
JD6-ETI
6
150
200
400
LD6-ETI
Two Speed, Constant
Horsepower — UL Listed
7.5
7.5
0-1
15
10
2
30
25
3
50
40
4
—
10
25
50
100
MCP
FD6-ETI
5
75
100
200
JD6-ETI
6
150
200
400
LD6-ETI
Reduced Voltage Autotransformer
Non-Reversing, Closed Transition
— UL Listed
2
3
4
5
10
25
40
75
15
30
50
100
25
50
100
200
FVNR
12 (305)
12 (305)
24 (610)
42 (1067)
JD6MCS / 400
72 (1829)
MD6MCS / 600
72 (1829)
ND6MCS / 1200
72 (1829)
40W × 20D
(1016W × 508D)
72 (1829)
30W (762W)
72 (1829)
30W (762W)
72 (1829)
30W (762W)
42 / 100
JD6MCS / 400
Consult
Siemens
42 / 100
MD6MCS / 600
IR Std./Opt.
—
30 / 30
60 / 60
100 / 100
FD6MCS / 200
2S2W-CH
24 (610)
24 (610)
36 (914)
48 (1219)
JD6MCS / 400
72 (1829)
MD6MCS / 600
72 (1829)
40W (1016W)
—
60 / 60
100 / 100
FD6MCS / 200
JD6MCS / 400
RVAT
42 (1067)
48 (1219)
60 (1524)
72 (1829), 30W (762W)
MD6MCS / 800
72 (1829)
30W (762W)
72 (1829)
30W (762W)
72 (1829)
30W (762W)
2S1W-CH
24 (610)
24 (610)
36 (914)
48 (1219)
72 (1829)
30W (762W)
Consult
Siemens
6
150
200
400
LD6-ETI
72 (1829)
30W (762W)
7
300
300
600
ND6
72 (1829)
50W × 20D
(1270W × 508D)
42 / 100
42 / 100
42 / 100
IR Std./Opt.
42 / 100
42 / 100
IR
100
N/A
IR Std./Opt.
2S2W-CH
24 (610)
24 (610)
30 (762)
30 (762)
2S2W
24 (610)
24 (610)
36 (914)
48 (1219)
72 (1829)
30W (762W)
kA
Interrupting
Rating
at 480 V
72 (1829)
30W (762W)
2S1W
24 (610)
24 (610)
36 (914)
48 (1219)
42 / 100
—
30 / 30
60 / 60
100 / 100
FD6MCS / 200
FVR
18 (457)
24 (610)
36 (914)
48 (1219)
72 (1829)
30W (762W)
2S2W
24 (610)
24 (610)
30 (762)
36 (914)
FD6-ETI
JD6-ETI
MCP
—
30 / 30
60 / 60
100 / 100
FD6MCS / 200
42 / 100
N/A
RVAT
42 (1067)
42 (1067)
48 (1219)
72 (1829), 30W (762W)
—
42 / 100
Fusible Type (For Maximum HP at 460V)
Standard
Disconnect
Dimensions in Inches (mm)
Sw/Fuse
Unit Height
Clip Sizes
W = Width, D = Depth
2SW1
24 (610)
24 (610)
48 (1219)
60 (1524)
72 (1829)
30W (762W)
IR
100
Consult
Siemens
72 (1829)
40W (1016W)
2SW1-CH
24 (610)
24 (610)
48 (1219)
60 (1524)
72 (1829)
30W (762W)
Consult
Siemens
IR
100
IR
100
42 / 100
Two Step Part Winding,
Star Connected — UL Listed
10
10
15
1
20
40
25
2
40
75
50
3
150
75
75
4
—
MCP
RVPW
72 (1829)
ND6MCS / 1200 50W × 20D
(1270W × 508D)
IR Std./Opt.
24 (610)
JD6-ETI
36 (914)
36 (914)
42 / 100
—
60 / 60
100 / 100
FD6MCS / 200
JD6MCS / 400
5
125
150
350
LD6-ETI
72 (1829)
42 / 100
LD6MCS / 600
6
—
250
500
MD6
72 (1829)
30W (762W)
42 / 100
MD6MCS / 600
The
addition of oversize CPT’s (above 50VA), relays, timers, etc. may increase unit height.
Consult Siemens for other voltages.
Interrupting ratings are 25 kAIC when not UL Listed.
Stationary units (not plug-in).
Fixed mounted unit – space behind not available.
Based on each winding handling 50%. Consult Siemens for other ratings.
Note: For Half Size Starters, contact Siemens.
15-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
RVPW
24 (610)
24 (610)
48 (1219)
72 (1829)
72 (1829)
30W (762W)
72 (1829)
30W (762W)
IR
100
Motor Control Centers
Starter Ratings and Dimensions
Technical / Dimensions
MCC Starter Ratings and Dimensions (cont'd)
Maximum
NEMA Horsepower Rating
Size
208 V 230 V 460 V
Circuit Breaker Type (For Maximum HP at 460V)
kA
Standard
Dimensions in Inches (mm)
Interrupting
Breaker
Unit Height
Rating
Type
W = Width, D = Depth
at 480 V
Reduced Voltage Wye Delta,
Open and Closed Transition
20
25
40
2
60
25
30
3
125
60
60
4
5
150
150
300
Solid State Reduced Voltgage
Open and Closed Transition
—
MCP
MCP
FD6-ETI
YDO
30 (762)
30 (762)
36 (914)
YDC
42 (1067)
42 (1067)
48 (1219)
LD6-ETI
72 (1829)
30W (762W)
72 (1829)
30W (762W)
1
2
7.5
10
7.5
15
10
25
—
CED6-ETI
CED6-ETI
3
25
30
50
CED6-ETI
36 (914)
4
40
50
100
CFD6-ETI
36 (914)
5
75
100
200
CJD6-ETI
6
150
150
350
CLD6-ETI
IR Std./Opt.
42 / 100
42 / 100
42 / 100
—
100 / 100
250MCS / 200
400MCS / 400
42 / 100
600MCS-600
IR Std./Opt.
—
(30 / 30)
(60 / 60)
(ED
MCS / 100)
18 (457)
36 (914)
72 (1829)
(ED
MCS / 100)
72 (1829)
Structure
W×D
24 (610)
(Plug-in)
36 (914)
(Plug-in)
20 (508) × 15 (381)
48 (1219)
(Plug-in)
60 (1524)
(Recessed Panel,
Fixed Mounted)
72 (1829)
(Recessed Panel, Fixed-Mounted)
20 (508) × 20 (508)
50 (1270) × 20 (508)
Lighting Panelboards
Applied in MCC’s
Number
Amp Of
Rating Circuits
Main Lug Only
18
225
30
42
Main Breaker
18
225
30
250
42
Height In Inches (mm)
1Ø, 3W 3Ø, 4W
3Ø, 4W
Panel 240/120 208Y/120 277/480
1 to 18 30 (762) 30 (762)
1 to 30 36 (914) 36 (914)
1 to 42 42 (1067) 42 (1067)
30 (762)
36 (914)
42 (1067)
1 to 18 30 (762) 30 (762) 30 (762)
1 to 30 36 (914) 36 (914) 36 (914)
1 to 42 42 (1067) 42 (1067) 42 (1067)
Distribution Transformers
kVA
Rating
1
1.5
2
3
5
7.5
10
15
25
30
37.5
9
15
25
30
45
Phase
Unit Height
In Inches (mm)
Plate-Mounted in
12 in. (305 mm) space
1
18 (457)
24 (610)
24 (610)
12 (305)
3
18 (457)
24 (610)
Transformer mounted on brackets 6 in. (152 mm) off sills.
Requires 20 in. (508 mm) deep structure.
For other available voltage ratings, consult Siemens.
For other enclosure types, consult Siemens.
Ratings are for variable torque applications. Consult Siemens for other applications.
Dimensions shown are for circuit breaker or fusible disconnects.
Drives with bypass and / or isolation require extra mounting space. Consult Siemens for further information.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-9
MOTOR CONTROL
CENTERS
Rated
Amperes
4
8.5
7.6
11
14
19
23
25
32
34
34
45
46
52
75
240 Max.
185 Max.
370 Max.
Dimensions—In. (mm)
Mounting
Height
18 (457) (Plug-in)
100
15
480V Variable Frequency Drives — NEMA 1A MCC Enclosures
100
36 (914)
60 (1524)
Requires 30 in. (762 mm) wide structure.
and / or isolation requires additional space.
15 HP at 230V requires additional unit space.
Consult Siemens.
The addition of relays, timers, etc. will require additional space.
Unit includes rated line side isolation starter and J fuses.
IR
IR
(ED
MCS / 100)
42 / 100
kA
Interrupting
Rating
at 480 V
18 (457)
36 (914)
48 (1219)
IR Std./Opt.
YDC
48 (1219)
60 (1524)
72 (1829)
72 (1829)
30W (508W)
60 (1524)
Bypass
Drive
Type
MM440
MM440
5
MM440
MM440
7.5
MM440
10
MM440
MM440
15
MM440
MM440
20
MM440
25
MM440
MM440
30
MM440
MM440
40
MM440
50
MM440
60
MM440
75-125
MM440
150-300
YDO
36 (914)
48 (1219)
72 (1829)
72 (1829)
30W (508W)
(ED
MCS / 100)
42 / 100
Circuit
Compact Units — Available
—
Breaker Type
Fusible Type
FVNR Only — UL Listed
6 (152)
7.5
MCP
10
7.5
0-1
6 (152)
may increase
The
25
18unit
(457)height.
ED6-ETI
10 of oversize
12 (305)
15 CPT’s (above
2 addition
50VA),
relays, timers,
etc.
Consult
Siemens
for30
other voltages.
50
30 (762)
15 (381)
ED6-ETI
25
3
Stationary units — Not plug in.
40
50
FD6
21 (533)
100
30 (762)
4
Rating
HP
2
Fusible Type (For Maximum HP at 460V)
Standard
Disconnect
Dimensions in Inches (mm)
Sw / Fuse
Unit Height
Clip Sizes
W = Width, D = Depth
Motor Control Centers
Incoming Cable Space, Wiring Troughs, Wiring Terminations
The National Electrical Code establishes
very specific guidelines for minimum
cable bending space within motor control
centers. Figures 1 through 5 below
describe the most common
arrangements for terminating main
incoming power cables in the MCC.
Consult Siemens for incoming line
compartment braced for 100,000
amperes symmetrical, short circuit.
Technical / Dimensions
Incoming Cable Space
Description of
Incoming Service
Top or Bottom
Incoming Section
Cable Entry
Top or Bottom
Space Requirements
in Inches (mm)
Notes
≤ 350 kcmil
Two per Phase
Top — Directly
on Main Bus
Either
None
See Figure 3
See Figure 1
See Figure 1
≤ 600 kcmil One or
Two per Phase
Top
Either
Top Wireway plus
12.0 (305) or
18.0 (457)
≤ 600 kcmil Three or
Four per Phase
Top
Top
Top Wireway plus
18.0 (457)
750 kcmil One or
Two per Phase
Top
Top
Top Wireway plus
24.0 (607)
—
350 kcmil One or
Two per Phase
Bottom
Bottom
Bottom Wireway plus
18.0 (457)
≤ 600 kcmil One or
Two per Phase
Bottom
Bottom
Bottom Wireway plus
24.0 (610)
Top or Bottom
Either
Full Structure
Top
Bottom
See
Breaker / Disconnect
See Figure 4
Top
Top
See
Breaker / Disconnect
See Figure 5
Top or Bottom
Either
Consult Siemens
Consult Siemens
≤ 750 kcmil, up to eight per phase
≤ 500 kcmil One or Two per Phase
≤ 750 kcmil One per Phase to
Main Breaker
≤ 500 kcmil One to
Four per Phase
≤ 750 kcmil One per Phase to
Main Breaker
Busway or Cable Feed
to Line Reactor
600 A Maximum
See Figure 2
600 A Maximum
See Figure 2
Consult Siemens
MOTOR CONTROL
CENTERS
15
Siemens MCC’s are equipped with a 12 in. (305 mm) high, full-width horizontal wireway in the top and 6 in. (152 mm) in the bottom
of each structure. A separate vertical wireway connects the top and bottom wiring areas in each vertical section. This wireway is 4
in. (102 mm) wide by 10 in. (254 mm) deep, or 38.25 (972) square inches (mm).
Note: All standard Siemens termination schemes shown herein do comply with applicable cable bending requirements of UL and the NEC.
Figure 1
Incoming Cable
Figure 2
Figure 3
Main
Lugs
Main
Lugs
Incoming
Cable
Main Lugs at Top with Top Cable Entry
Can accommodate up to two 600 kcmil cables
per phase when using Siemens standard
mechanical lugs. A total height of 24 in. (610
mm). This includes 12 in. (305 mm) for the top
wireway plus 12 in. (305mm) of unit space.
Compression lugs require extra vertical space
or the addition of a top hat.
Main Lugs at Bottom with Bottom Cable
Entry
Lugs are bolted directly to the bottom of the
vertical bus. Can accommodate up to two 350
kcmil per phase in 24 in. (610 mm) high
compartment. This includes 6 in. (152 mm) for
the bottom wireway plus 18 in. (457 mm) of unit
space. Can accommodate up to two 600 kcmil
per phase in 30 in. (762 mm) high compartment.
This includes 6 in. (152 mm) for the bottom
wireway plus 24 in. (610 mm) of unit space.
Figure 4
Main Disconnect with Bottom Cable Entry
Main Lugs at Top with Top or Bottom
Cable Entry
In this arrangement the lugs mount directly
on the horizontal bus, eliminating the need to
use unit mounting space. The limitation here
is 350 kcmil cable per phase.
Figure 5
Main Disconnect with Top Cable Entry
If bottom entry is used, cables must be properly laced and supported based upon the available short circuit
current. See dimensional requirements for molded case breakers and fused switches, consult local sales office.
15-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Motor Control Center Replacement Units
Aftermarket Overview
Product Description (Time Line: 2002 — Current)
Introduced in 2002, Siemens TIASTAR is an advanced
SISystem™ (Smart Integrated Solution System) that provides
you with seamless control of your physical plant by fusing ASI,
PROFIBUS®, and ACCESS™ – as well as most legacy
systems – into a robust, fully integrated management system.
Units widths are normally 15" or 20" wide, and 12" tall with 6"
increments. Today, we provide you with Siemens breakers
and starters. The standard lead-time for delivery is 24 hrs –
3 weeks.
Replacement Capabilities
Starter Units
Model 95+
The Model 95+ retrofit buckets are designed to fit into Model
95+ MCCs. This upgrade from Model 95 included changes in
handles, color, pilot devices, and stabs. Unit widths are
normally 15" or 20" wide, and 12" tall with 6" increments.
Today, we provide you with Siemens breakers and starters.
The standard lead-time for delivery is 24 hrs – 3 weeks.
Replacement Capabilities
Starter Units
Replacement starters are available for all plug-in and Non
plug-in units. A complete unit for adding to an existing MCC
includes a unit door, divider pans and all necessary mounting
hardware. Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and Fusible
▪ Pilot Devices, VFD, Softstarts
and ASI
▪ Relays, Fuses
▪ UL Labeled
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-11
MOTOR CONTROL
CENTERS
Product Description (Time Line: 1996 — 2001)
15
Replacement starter units are available for all plug-in and Non
plug-in units MCC designs. A complete unit for adding to an
existing MCC includes a unit door, divider pans and all
necessary mounting hardware. Features of the replacement
units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT & Pilot Devices
▪ CB and Fusible
▪ Relays, Fuses, VFD
and Softstarts
▪ Soft Starts, SIMOCODE,
ASI, PROFIBUS
▪ UL Labeled
Motor Control Center Replacement Units
Aftermarket Overview
Product Description (Time Line: 1995 — 1997)
Model 95
The Model 95 was originally manufactured in Raleigh, NC.
Model 95 served as a style template for many old MCC
buckets since installation procedures and dimensions stayed
the same. Unit widths are normally 15" or 20" wide, and 12"
tall with 6" increments.
The original Model came with a variety of CB and starters
from ITE, C-H and Siemens 3TF & 3UA Overload. Today, we
provide you with Siemens breakers and starters. The standard
lead-time for delivery is 24 hrs – 3 weeks.
Replacement Capabilities
Starter Units
MOTOR CONTROL
CENTERS
15
Replacement starters are available for all plug-in and Non
plug-in units. A complete unit for adding to an existing MCC
includes a unit door, divider pans and all necessary mounting
hardware. Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and fusible
▪ Pilot Devices
▪ Relays and Fuses
Product Description (Time Line: 1986 — 1997)
Model 90
The Model 90 retrofit buckets are designed to fit into Model
90 MCCs. Unit widths are normally 15" or 20" wide, and 12"
tall with 6" increments.
The original Model came with a variety of CB and starters
from ITE, C-H, and Siemens 3TF & 3UA Overload. Today, we
provide you with Siemens breakers and starters. The standard
lead-time for delivery is 24 hrs – 3 weeks.
Replacement Capabilities
Starter Units
Replacement starters are available for all plug-in and Non
plug-in units. A complete unit for adding to an existing MCC
includes a unit door, divider pans and all necessary mounting
hardware. Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and Fusible
▪ Pilot Devices
▪ Relays and Fuses
15-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Motor Control Center Replacement Units
Aftermarket Overview
Product Description (Time Line: 1979 — 2001)
This is an upgrade from Class 89 developed by Furnas in
1965. Bucket structures are normally 15" or 20" wide, and 12"
tall with 6" increments.
The original System 89 came with a variety of CB and
starters from Westinghouse, GE and Furnas Electric. Today,
we provide you with Siemens breakers and starters. The
standard lead-time for delivery is 24 hrs – 3 weeks.
Replacement Capabilities MCC Plant: West Chicago
Starter Units
The Marq21 retrofit buckets are designed to fit into Marq21
MCCs. Marq21 was created from the forge of two of the
world’s foremost electrical companies, Siemens-Allis. Units
widths are normally 15" or 20" wide, and 12" tall with 6"
increments.
The original Marq21 came with a variety of CB and starters
from ITE and Allis-Chambers. The standard lead-time for
delivery is 24 hrs – 3 weeks.
Note: Original components are not available. Today, we
provide you with Sentron breakers and Siemens starters.
Replacement Capabilities
Starter Units
Replacement starters are available for all plug-in and Non
plug-in units. A complete units for adding to an existing MCC
includes a unit door, divider pans and all necessary mounting
hardware. Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and fusible
▪ Pilot Devices
▪ Relays and Fuses
▪ UL Labeled
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
15-13
MOTOR CONTROL
CENTERS
Product Description (Time Line: 1975 — 1996)
15
Replacement starter units are available for all plug-in and non
plug-in unit MCC designs. A complete unit for adding to an
existing MCC includes a unit door, divider pans and all
necessary mounting hardware. Features of the replacement
units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and Fusible
▪ Pilot Devices
▪ Relay, Fuses, VFD
and Softstarts
▪ UL Labeled
Motor Control Center Replacement Units
Aftermarket Overview
Product Description (Time Line: 1972 — 1975)
The Mark 2 retrofit buckets are designed to fit into their old
design. This is an upgrade from the Mark 1 in ValueLine family.
Unit widths are normally 15" or 20" wide, and 12" tall with 6"
increments.
Mark 2
The original Mark 2 came with a variety of CB and starters
from Westinghouse and Allis-Chalmers. The standard leadtime
for delivery is 24 hrs – 3 weeks.
Add-on MCCs:
New TIASTAR MCC can be spliced to existing line-up.
Note: Original components are not available. Today, we
provide you with Sentron breakers and Siemens starters.
Replacement Capabilities
Starter Units
MOTOR CONTROL
CENTERS
15
Replacement starters are available in plug-in Non plug units. A
complete unit for adding to an existing MCC includes a unit
door, divider pans and all necessary mounting hardware.
Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and Fusible
▪ Pilot Devices
▪ Relays, Fuses
▪ UL Labeled
Product Description (Time Line: 1971 — 1992)
5600
The 5600 MCC retrofit buckets are designed to fit into their
old design. 5600 units are 15" wide buckets and the fix
mounted panels are 20" wide.
The original Gould came with a variety of old CB and starters
from ITE, Rowan, and AMP-CAP. These buckets are available
up to NEMA size 5. The standard lead-time for delivery is 24
hrs – 3 weeks.
Note: Original components are not available. Today, we
provide you with Sentron™ breakers and Siemens starters.
Replacement Capabilities
Starter Units
Replacement starters are available for all plug-in and Non
plug-in units. A complete unit for adding to an existing MCC
includes a unit door, divider pans and all necessary mounting
hardware. Features of the replacement units include:
▪ Siemens Starter Size 1-6
▪ CT, CPT, PT
▪ CB and Fusible
▪ Pilot Devices, Relays,
and Fuses
▪ UL Labeled
▪ Shelf is ordered separately
15-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16SPEEDFAX
TM
2007-2008 Control Products
Contents
16-5 – 16-6
16-7 – 16-8
16-9 – 16-10
16-11
16-12 – 16-13
16-14 – 16-16
16-17
16-18 – 16-26
16-27 – 16-28
16-29 – 16-30
16-31
16-32 – 16-35
16-36 – 16-43
16-44 – 16-45
16-45
16-46
16-47 – 16-49
16-50 – 16-51
16-52
16-53
16-54 – 16-55
16-56 – 16-57
16-58 – 16-59
16-60 – 16-61
16-62
16-63
16-64
16-65
16-66
16-67
16-68 – 16-70
16-71 – 16-73
16-74 – 16-78
16-79 – 16-89
16-90 – 16-93
16-94 – 16-98
16-99– 16-128
16-129 – 16-147
CONTROL
PRODUCTS
Residential Commercial Industrial
16-3
16-4
16
What’s New
Product Overview
NEMA & General Purpose Control
Manual Control
Fractional HP Starters, Class SMF
Switches, Class MMS and MRS
Starters and Switches, Class 11 - 3RV
NEMA Control
Catalog Numbering System
Non-Combination Starters Features and Benefits
Non-Reversing Starters, Class 14
Combination Starters Features and Benefits
Combination Starters, Class 17 and 18
Reversing Starters, Class 22
Combination Reversing Starters, Class 25 and 26
Two Speed Starters Features and Benefits
Two Speed Starters, Class 30
Combination Two Speed Starters, Class 32
Non-Reversing Contactors, Class 40
Vacuum Contactors, Class 40
Reversing Contactors, Class 43
Overload Relays, Class 48, 958 and 3RB20
Current Sensitive Relays, Class 97
Duplex Controllers
Features and Benefits
Non Combination, Class 83
Combination, Class 84
Pump Control Panels
Features and Benefits
Full-Voltage Type, Class 87
Reduced-Voltage Type, Class 88
Vacuum Starter Type, Class 87
Reduced Voltage Control
Reduced Voltage Features and Benefits
Auto Transformer Starters, Class 36 and 37
Part Winding Starters, Class 36 and 37
Wye Delta Open Transition, Class 36 and 37
Wye Delta Closed Transition, Class 36 and 37
Lighting Control
Electrically Held Contactors, LE
Mechanically Held Contactors, CLM
Control Power Transformers
Domestic and International (UL, CSA and CE), Class MT and MTG
Modifications and Drawings
Field Modification Kits
Enclosure Kits
Factory Modifications
Dimensions
Wiring Diagrams
16SPEEDFAX
TM
2007-2008 Control Products
CONTROL
PRODUCTS
16
Contents
Heater Tables and Replacement Parts
Overload Relay Heater Tables
NEMA Coils and Contact Kits
Coil VA Ratings and Overload Relays
Lighting Contactor Parts and Kits
Definite Purpose Control
General Application - Class 42 and 45
Soft Starters Control
Electronic Soft Starts, 3RW
Control Products, 3RW
Mods and Dimensions
Wiring Diagrams
Pilot Devices
Class 50 Standard Duty Control Stations
Introduction
Standard Duty Type 1 and 1B
Heavy Duty Type 4 Stations
Class 50 Accessories
Class 50 Standard Duty Dimension Drawings
Class 52 30mm Mounting Diameter Pilot Devices
Introduction
Complete Pushbutton units
Push-pull Mushroom Pushbuttons
Indicator lights-Push to Test Lights-Illuminated Pushbuttons
Pushbuttons and Push-pull Operators
Selector Switch Operators
Keyed Selector Switches
Specialty Operators
Class 52 Black Max N4-4X-13
Complete Units
Pushbuttons and Push-pull Operators
Selector Switch Operators
Indicator lights-Push to Test Lights-Illuminated Pushbuttons
Class 52 30mm Enclosed Pushbutton Stations
Selector Switch Operators
Cam Selection Chart for Selector Switches
Custom Order Pushbutton Stations
Accessories and Spare Parts
Dimensional Drawings
Assembled Enclosures with Standard Devices.
P30 Empty Enclosures Only
Enclosure Legend Plates
Enclosure Dimension
Residential Commercial Industrial
16-148 – 16-154
16-155 – 16-156
16-157
16-158 – 16-159
16-160 – 16-161
16-162 – 16-167
16-168 – 16-176
16-177 – 16-178
16-179
16-180
16-181 – 16-185
16-186
16-187
16-188
16-189
16-189 – 16-190
16-191 – 16-192
16-193 – 16-194
16-195
16-196 – 16-198
16-199
16-200 – 16-201
16-202
16-203 – 16-204
16-205
16-206 – 16-207
16-208
16-209
16-210
16-211 – 16-213
16-214 – 16-215
16-216 – 16-217
16-218
16-219
16-220
Control Products
What’s New
Catalog Enhancements
▪ Section 16 pages have been restructured according to
product group for even better organization. Each product
group is identified by a sub-tab on each page. The groups
consist of:
—NEMA & General Purpose Control
—Definite Purpose Control
—Soft Starter Control
—Pilot Devices
▪ Class 97 Current Sensitive Relay dimensions and wiring
diagram added. See pages 16-108 and 16-143.
▪ Class MRS Fractional HP Switch wiring diagrams added.
See page 16-129.
Class 14
with Shield
Class 17
with Shield
Handle and Mechanism Replacement Kits
Handle & Mechanism replacement kits are now available
for class 17, 18, 25, 26, & 32. The replacement kits include
the operator handle, link rod, mechanism and all necessary
hardware. See page 16-159.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-3
CONTROL
PRODUCTS
Protective Shields - Protect Against Accidental Contact
with NEMA Products
Protective shields can be added to open and enclosed NEMA
contactors and starters, as well as fusible or non-fusible
disconnect switches in combination starters and pump panels.
Protective shields provide protection against accidental contact
with live parts such as line and load terminals, auxiliary
contacts and coil terminals.
Contactor and starter shields allow access to terminals and the
reset button on overloads without removing the shield.
▪ The shields are designed for use on Class 40 contactors and
Class 14 starter sizes 00 to 4.
▪ The same shield used on Class 14 starters can be used on
either solid state or bimetal overloads.
▪ Shields used on disconnect switches are designed for
30-200A switches in either combination starters or pump
control panels.
▪ Shield covers both switch and load base fuse clips when
installed.
See page 16-82.
16
Enclosure Kits for Lighting & Heating Contractors
Enclosure kits are now available for Class LE and CLM Lighting
& Heating Contactors. These enclosure kits allow you to add
value by assembling enclosed lighting & heating contactors in
the field. (Contactor and modification kits are sold separately.)
See page 16-91.
Class 40
with Shield
Control Products
NEMA & General Purpose Controls
Class MMS & MRS
Fractional Horsepower
Manual Switches
Page 16-7
Class 11
Manual Starters and
Switches
Page 16-9
Class 22
NEMA Reversing
Starters
Page 16-27
Class 25, 26
NEMA Combination
Reversing Starters
Page 16-29
Class 30
NEMA Multi-Speed
Starters
Page 16-32
Class 40
NEMA Contactors
and Vacuum Contactors
Page 16-44
Class 43
NEMA Reversing
Contactors
Page 16-46
Class 48, 958, 3RB20
Overload Relays
Page 16-47
Class 83, 84, 87, 88
Pump Controls
Page 16-53
Class MT, MTG
Control Power
Transformers
Page 16-74
Modifications and
Drawings
Page 16-79
Heater Tables and
Replacement Parts
Page 16-148
Class 14
NEMA Starters
Page 16-14
Class 32
NEMA Combination
Multi-Speed Starters
Page 16-36
Class 17, 18
NEMA Combination
Starters
Page 16-18
Class 36, 37
Reduced Voltage
Electromechanical
Starters
Page 16-64
CONTROL
PRODUCTS
16
Class SMF
Fractional Horsepower
Manual Starters
Page 16-5
Product Overview
Class LE, CLM
Lighting Contactors
Page 16-68
16-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Class 97
Current Sensitive Relays
Page 16-50
Manual Control
Fractional HP Starters, Class SMF
Class SMF
Class SMF fractional horsepower
starters provide overload protection as
well as manual on-off control for small
horsepower motors in a variety of
industrial and commercial applications.
Available in one or two pole versions,
these devices are suitable for use with
AC single phase motors up to 1 HP.
Two pole starters can also be used
with DC motors up to 3⁄4 HP. Typical
applications include fans, conveyors,
pumps, and small machine tools.
Continuous Current Rating
16 amperes.
Overload Trip Assembly
Motor protection is provided by a Class
SMFH heater element which must be
installed before the starter will operate.
Enclosures
Class SMF, NEMA Type 1 surface
mounting enclosures are sheet steel
with a thermo-plastic wrap-around cover
for convenience in wiring. The NEMA
Type 1 enclosure is also available in an
oversized version which allows more
wiring space. A zinc alloy die casting is
used for NEMA Type 4 enclosures.
Pilot Lights
Red or green neon pilot light units
are available for flush mounting plates,
NEMA Type 1 enclosures, and NEMA
Type 4 enclosures. Pilot lights may be
either factory or field installed. (For
starters that contain a pilot light, a Red
light is standard. For a Green pilot light
add ”G” to the end of the catalog
number.)
Terminals
Binding head screw type terminals are
suitable for #10 or smaller copper wire,
and are accessible from the front. All
terminals are clearly marked.
Operation
Available with toggle handle or with
removable key type operator to
discourage unauthorized operation.
Emergency Off Actuator
A toggle operator extender is available
for Class SMF, NEMA Type 1 surface
mounted units. The extender has a red
vinyl button that provides a fast and
easy method for locating and switching
the device‘s toggle operator into the
OFF position. The Emergency Off
Actuator is available in kit form only
for field installation.
Handle Guard/Lock-Off
An optional handle guard on Class
SMF, NEMA Type 1 enclosed starters
prevents accidental operation of the
toggle operator and also allows the
toggle operator to be padlocked in
either the “ON” or “OFF” position.
This handle guard can be factory
installed on NEMA Type 1 enclosed
starters and is also available in kit form
for field installation on NEMA Type 1
surface and flush mounting enclosures.
Standard NEMA Type 4 metallic
enclosures include provisions for
padlocking the device in the
OFF position.
CONTROL
PRODUCTS
Mounting
Open types without a pilot light fit
standard single gang switch boxes, and
can be used with any cover plate having
a standard toggle cutout. Single-unit
flush mounting types, including those
with pilot lights, are suitable for wall
mounting in a standard switch box or
for machine cavity mounting without
a box.
Class SMF Starter in a NEMA Type 1
Enclosure with Pilot Light
16
Two Speed Starters
Two speed manual starters are
designed for control of small single
phase AC motors having separate
windings for high and low speed
operation. Two toggle operated starters
are used, with overload protection
included for each motor winding.
Surface mounting devices, and those
with a gray flush plate, utilize a
mechanical interlock which allows
direct control of the motor by means
of the toggle operators.
General
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-5
Manual Control
Fractional HP Starters with Melting Alloy Overload, Class SMF
Selection
Ordering Information
Horsepower Ratings
Maximum Horsepower
Heater Elements see page 16-148.
䊳 Field Modification Kits see page 16-79.
䊳 Dimensions see pages 16-99.
䊳 Wiring Diagrams see page 16-129.
䊳
AC Single Phase
DC
1-Pole
2-Pole
2-Pole
115–230
1
1
34
277
1
1
—
Volts
Class SMF Starter in a NEMA Type 1
Enclosure with Pilot Light
⁄
Starter—Class SMF, Single Phase
General Purpose Flush Mounting
Open Starter with Flush Plate
(No Enclosure Provided)
Standard
Stainless
Steel
Flush Plate
Gray
Flush
Plate
NEMA Type 1 General Purpose
Enclosure, Surface Mounting
Jumbo
Stainless
Steel
Flush Plate
Type
Open Type
of
No. of
Catalog List Catalog List Catalog List Catalog
Operator Poles Starter Features Number Price $ Number Price $ Number Price $ Number
Standard
Red Pilot Light
Standard
Red Pilot Light
Standard
Red Pilot Light
Standard
Red Pilot Light
1
Toggle
2
1
Key
2
SMFF01
SMFF01P
SMFF02
SMFF02P
SMFF03
SMFF03P
SMFF04
SMFF04P
43.00
69.00
51.00
77.00
61.00
86.00
69.00
96.00
SMFFF1 48.00
SMFFF1P 72.00
SMFFF2 56.00
SMFFF2P 82.00
SMFFF3 65.00
SMFFF3P 82.00
SMFFF4 72.00
SMFFF4P 100.00
SMFFS1
SMFFS1P
SMFFS2
SMFFS2P
SMFFS3
SMFFS3P
SMFFS4
SMFFS4P
50.00
77.00
61.00
86.00
69.00
96.00
77.00
103.00
—
SMFFSJ1P
—
SMFFSJ2P
—
SMFFSJ3P
—
SMFFSJ4P
Standard
NEMA
Type 4
Watertight,
Dust-tight
Metallic
Enclosure
with Clear Cover
Watertight,
Dust-tight
Metallic
Enclosure
NEMA Type
3R, 7 & 9
Div 1 and Div 2
Class I Groups
B, C, D &
Class II Groups
E, F, G
Enclosures
Oversized
List
Catalog
Price $ Number
List Catalog
Price $ Number
—
90.00
—
100.00
—
107.00
—
117.00
51.00
77.00
61.00
86.00
69.00
96.00
77.00
103.00
SMFFG1
SMFFG1P
SMFFG2
SMFFG2P
SMFFG3
SMFFG3P
SMFFG4
SMFFG4P
NEMA Type
3R, 4 & 12
List
Catalog
Price $ Number
SMFFGJ1
61.00 SMFFWN1
SMFFGJ1P 86.00 SMFFWN1P
SMFFGJ2
69.00 SMFFWN2
SMFFGJ2P 96.00 SMFFWN2P
SMFFGJ3
77.00 SMFFWN3
SMFFGJ3P 103.00 SMFFWN3P
SMFFGJ4
86.00 SMFFWN4
SMFFGJ4P 111.00 SMFFWN4P
List
Catalog
Price $ Number
182.00
189.00
249.00
258.00
198.00
207.00
268.00
276.00
List
Catalog
Price $ Number
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
List
Price $
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Starter With Handle Guard/Lock-Off—Class SMF, Single Phase
Standard
Red Pilot Light
(2) 3⁄4" NPT Outlets
(2) 3⁄4" NPT Outlets
and Red Pilot Light
Standard
Red Pilot Light
(2) 3⁄4" NPT Outlets
(2) 3⁄4" NPT Outlets
and Red Pilot Light
CONTROL
PRODUCTS
16
1
Toggle
2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SMFFG5 61.00 SMFFGJ5
SMFFG5P 86.00 SMFFGJ5P
—
—
—
69.00 —
96.00 —
—
—
—
—
—
SMFFW1 193.00 SMFFR1 211.00
SMFFW1P 262.00 —
—
SMFFW1H 211.00 SMFFR1H 228.00
—
—
—
—
SMFFW1PH 279.00 —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SMFFG6 69.00 SMFFGJ6
77.00 —
SMFFG6P 98.00 SMFFGJ6P 103.00 —
—
—
—
—
—
—
—
—
SMFFW2
203.00 SMFFR2 219.00
SMFFW2P 272.00 —
—
SMFFW2H 219.00 SMFFR2H 237.00
—
—
—
SMFFW2PH 289.00 —
—
—
—
—
—
One Starter in Duplex Enclosure—Class SMF, Single Phase
NEMA & General
Purpose Control
General Purpose Flush Mounting
Open Starter with Flush Plate - (No Enclosure Provided)
Type of
Operator
Number
of Poles
Toggle
2
Key
2
Starter Features
Standard
Red Pilot Light
Red Pilot Light
Gray Flush Plate
For Wall or Cavity
Mounting
Stainless Steel Flush
Plate for Wall or Cavity
Mounting
NEMA Type 1 General
Purpose Enclosure
Surface Mounting
Catalog Number
—
—
—
Catalog Number
—
—
—
List Price $
—
—
—
Catalog Number List Price $
SMFFG02
96.00
SMFFG02P
121.00
SMFFG04P
121.00
—
SMFFS22P
SMFFS44P
—
242.00
276.00
SMFFG222
SMFFG222P
SMFFG44P
List Price $
—
—
—
Replacement
Starters
Catalog Number
—
—
—
List Price $
—
—
—
Two Starters In Duplex Enclosure—Class SMF, Single Phase
Toggle
2 Per Starter
Key
2 Per Starter
Standard
Red Pilot Light on Each Starter
Red Pilot Light on Each Starter
SMFFF222
SMFFF222P
SMFFF44P
138.00
233.00
268.00
147.00
242.00
276.00
—
—
—
—
—
—
Starter And “Auto-Off-Hand” SPDT Selector Switch (AC Only)—Class SMF, Single Phase
Standard
Red Pilot Light
Standard
Red Pilot Light
Red Pilot Light
1
Toggle
2
Key
2
SMFFF71
SMFFF71P
SMFFF72
SMFFF72P
SMFFF74P
125.00
151.00
133.00
160.00
176.00
—
SMFFS71P
—
SMFFS72P
SMFFS74P
—
160.00
—
168.00
186.00
SMFFG71
SMFFG71P
SMFFG72
SMFFG72P
SMFFG74P
133.00
160.00
142.00
168.00
186.00
—
—
—
—
—
—
—
—
—
—
SMFFF11
SMFFF11P
182.00
276.00
—
—
—
—
SMFFG11
SMFFG11P
189.00
285.00
SMFF01T
SMFF01PT
51.00
77.00
Two Speed Starters (AC Only)—Class SMF, Single Phase
Mechanical Interlock
Mechanical Interlock and (2) Red Pilot Lights
Mechanical Interlock, HIGH-OFF-LOW
Selector Switch and (2) Red Pilot Lights
Mechanical Interlock
Mechanical Interlock and (2) Red Pilot Lights
Mechanical Interlock, HIGH-OFF-LOW
Selector Switch and (2) Red Pilot Lights
1
Toggle
2
One heater element required.
Furnished with (1) 3⁄4" NPT Outlet
in bottom
—
—
SMFFS101P
285.00
—
—
SMFF01PT
77.00
SMFFF22
SMFFF22P
198.00
293.00
—
—
—
—
SMFFG22
SMFFG22P
207.00
302.00
SMFF02T
SMFF02PT
61.00
86.00
—
—
SMFFS202P
302.00
—
—
SMFF02PT
86.00
Two heater elements required.
Order Open Type starter plus separate
For
handle guard kit.
(reversible for top feed).
16-6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
starters that contain a pilot light, a Red light is
standard. For a Green pilot light add ”G” to the end of
the catalog number.
Discount Schedule NEMA
Manual Control
Fractional HP Switches, Class MMS, MRS
Class MMS, MRS
Enclosures
Class MMS and MRS motor starting
switches provide manual “ON-OFF”
control of single or three phase AC
motors where overload protection is
not required or is provided separately.
Compact construction and a 600 volt
rating make these switches suitable
for a wide range of industrial and
commercial uses. Typical applications
include small machine tools, pumps,
fans, conveyors and many other types
of electrical machinery. They can also
be used on non-motor loads such as
resistance heating applications.
Class MMS, MRS, NEMA Type 1
surface mounting enclosures are sheet
steel with a thermo-plastic wrap-around
cover for convenience in wiring.
The NEMA Type 1 enclosure is also
available in an oversized version which
allows more wiring space. A zinc alloy
die casting is used for NEMA Type 4
enclosures.
Class MMS Switch in a
NEMA Type 1 Enclosure
CONTROL
PRODUCTS
Emergency Off Actuator
A toggle operator extender is available
for Class MMS, MRS, NEMA Type 1
surface mounted units. The extender
has a red vinyl button that provides a
fast and easy method for locating and
switching the device‘s toggle operator
into the OFF position. The Emergency
Off Actuator is available in kit form
only for field installation.
Handle Guard/Lock-Off
An optional handle guard on Class
MMS, MRS, NEMA Type 1 enclosed
switches prevents accidental operation
of the toggle operator and also allows
the toggle operator to be padlocked in
either the “ON” or “OFF” position. This
handle guard is available in kit form for
field installation on NEMA Type 1
surface and flush mounting enclosures.
Standard NEMA Type 4 metallic
enclosures include provisions for
padlocking the device in the
OFF position.
16
Continuous Current Rating
MMS & MRS: 30 amperes at 250
volts max, 26.4 amperes at 277 volts,
20 amperes at 600 volts max, 30
amperes resistive at 600 volts max.
Two Speed—Class MRS
Two speed manual switches may be
used with separate winding three phase
or single phase AC motors where
overload protection is not required or is
provided separately. Two switches are
employed to give “ON-OFF” control in
each speed.
Reversing—Class MRS
Reversing manual switches provide
a compact means of starting, stopping
and reversing AC motors where
overload protection is not required or
is provided separately. They are suitable
for use with three phase squirrel cage
motors and for single phase motors
which can be reversed by reconnecting
motor leads. Two switches are used,
one to connect the motor forward
rotation and one for reverse.
Pilot Lights
Red or green neon pilot light units
are available for flush mounting plates,
NEMA Type 1 enclosures, and NEMA
Type 4 enclosures. Pilot lights may be
either factory or field installed. (For
switches that contain a pilot light, a Red
light is standard. For a Green pilot light
add ”G” to the end of the catalog
number.)
Terminals
Binding head screw type terminals are
suitable for #10 or smaller copper wire,
and are accessible from the front. All
terminals are clearly marked.
Mounting
Open types without a pilot light fit
standard single gang switch boxes, and
can be used with any cover plate having
a standard toggle cutout. Single-unit
flush mounting types, including those
with pilot lights, are suitable for wall
mounting in a standard switch box or
for machine cavity mounting without
a box.
Operation
Available with toggle handle or with
removable key type operator to
discourage unauthorized operation.
General
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-7
Manual Control
Switches, Class MMS, MRS
Selection
Ordering Information
Horsepower Ratings
䊳
Heater Elements not Required.
Field Modification Kits see
page 16-79.
Dimensions see pages 16-99.
䊳
Wiring Diagrams see page 16-129.
䊳
䊳
Device
Class MMS
Class MRS
Reversing
Class MMS
Two Speed
Class MMS Switch in a
NEMA Type 1 Enclosure
Maximum HP
No of
Poles
Motor Type
AC
2
3
2
3
2
3
3
Single Phase
3-Phase
Single Phase
3-Phase
Single Phase
3-Phase, Constant or Variable Torque
3-Phase, Constant Horsepower
115V
2
2
2
2
2
2
2
DC Ratings
230V
450–575V 90V
115V 230V
2
71/2
2
71/2
2
71/2
71/2
3
10
3
10
3
10
10
2
2
2
2
2
2
2
1
1
1
1
1
1
1
11/2
11/2
11/2
11/2
11/2
11/2
11/2
Switch—Class MMS, Single Phase and 3-Phase
General Purpose Flush Mounting
Open Switch with Flush Plate
(No Enclosure Provided)
Standard
Jumbo
Gray
Stainless
Stainless
Flush
Steel
Steel
Plate
Flush Plate
Flush Plate
Type
No
Open Type
of
of
Switch
Catalog
List Catalog
Operator Poles Features Number
Price $ Number
Standard
MMSK01
32.00 MMSKF1
Red Pilot Light
75.00 MMSKF1A
MMSK01A
115V AC
2
Toggle
3
List Catalog
Price $ Number
List Catalog
Price $ Number
36.00 MMSKS1
40.50
NEMA Type 1 General Purpose
Enclosure Surface Mounting
with Clear Cover
Standard
—
MMSKG1
List Catalog
Price $ Number
40.50 MMSKGJ1
83.00 MMSKSJ1A 97.00 MMSKG1A 83.00 MMSKGJ1A
80.00 MMSKS1B
83.00 MMSKSJ1B 97.00 MMSKG1B 83.00 MMSKGJ1B
Standard
86.00 MMSKS2
90.00
—
—
MMSKG2
Class I Groups
B, C & D &
Class II Groups
E, F, G
Enclosures
Enclosure
Oversized
80.00 MMSKS1A
82.00 MMSKF2
NEMA
Type 7 & 9
Watertight,
Dust-tight
Metallic Enclosurer Metallic
Red Pilot Light
MMSK01B 75.00 MMSKF1B
230V AC
MMSK02
NEMA
Type 4
Watertight,
Dust-tight
List Catalog
Price $ Number
—
NEMA Type
3R, 4 & 12
90.00 MMSKGJ2
List Catalog
Price $ Number
49.00 MMSKWN1
List
Catalog
Price $ Number
List
Catalog
Price $ Number
170.00 MMSKW1
189.00 MMSKR1 207.00
91.00 MMSKWN1A 212.00 MMSKW1A 258.00
—
—
91.00 MMSKWN1B 212.00 MMSKW1B 258.00
—
—
100.00 MMSKWN2
212.00 MMSKW2
233.00 MMSKR2 254.00
Red Pilot Light
208-240V AC MMSK02B 125.00 MMSKF2B 130.00 MMSKS2B 133.00 MMSKSJ2B 147.00 MMSKG2B 133.00 MMSKGJ2B 142.00 MMSKWN2B 281.00 MMSKW2B 302.00
Red Pilot Light
440-600V AC MMSK02C 125.00 MMSKF2C 130.00 MMSKS2C 133.00 MMSKSJ2C 147.00 MMSKG2C 133.00 MMSKGJ2C 142.00 MMSKWN2C 281.00 MMSKW2C
Standard
2
MMSK03
Red Pilot Light
MMSK03B
230V AC
Key
3
CONTROL
PRODUCTS
16
Red Pilot Light
MMSK03A
115V AC
List
Price $
—
—
—
49.00 MMSKF3
54.00 MMSKS3
187.00
—
—
—
—
91.00 MMSKF3A
97.00 MMSKS3A 101.00 MMSKSJ3A 111.00 MMSKG3A 101.00 MMSKGJ3A 107.00 MMSKWN3A 229.00
—
—
—
—
97.00 MMSKS3B 101.00 MMSKSJ3B 111.00 MMSKG3B 101.00 MMSKGJ3B 107.00 MMSKWN3B 229.00
91.00 MMSKF3B
57.00
—
—
MMSKG3
57.00 MMSKGJ3
69.00 MMSKWN3
302.00
—
—
—
—
—
237.00
—
—
—
—
142.00 MMSKF4B 147.00 MMSKS4B 151.00 MMSKSJ4B 163.00 MMSKG4B 151.00 MMSKGJ4B 160.00 MMSKWN4B 306.00
—
—
—
—
142.00 MMSKF4C 147.00 MMSKS4C 151.00 MMSKSJ4C 163.00 MMSKG4C 151.00 MMSKGJ4C 160.00 MMSKWN4C 306.00
—
—
—
—
Standard
MMSK04
Red Pilot Light
208–240V AC MMSK04B
127.00 MMSKF4
Red Pilot Light MMSK04C
440–600V AC
103.00 MMSKS4
107.00
—
—
MMSKG4
107.00 MMSKGJ4
117.00 MMSKWN4
NEMA & General
Purpose Control
Reversing Switch—Class MRS, Single Phase and 3-Phase
Type of
Operator
Number of
Poles
Suitable
Motor Types
Switch Features (Including
Mechanical Interlock)
2
Single Phase
3-Lead
Repulsion-Induction
3
3-Phase; Also
Single Phase Capacitor,
Split Phase, or 4-Lead
Repulsion-Induction
Standard
Red Pilot Device—115V AC
Red Pilot Device— 230V AC
Standard
Red Pilot Light—110–120V AC
Red Pilot Light—208–220V AC
Red Pilot Light—440–600V AC
Toggle
General Purpose
Flush Mounting
NEMA Type 1
Open Switch with Flush Plate General Purpose
(No Enclosure Provided)
Enclosure Surface Mounting
Catalog Number List Price $ Catalog Number List Price $
MRSKF11
MRSKF11A
MRSKF11B
MRSKF22
MRSKF22A
MRSKF22B
MRSKF22C
163.00
233.00
233.00
258.00
328.00
328.00
328.00
MRSKG11
MRSKG11A
MRSKG11B
MRSKG22
MRSKG22A
MRSKG22B
MRSKG22C
172.00
242.00
242.00
268.00
336.00
336.00
336.00
Replacement Switch
Class MRS
Catalog Number List Price $
MRSK01T
MRSK01AT
MRSK01BT
MRSK02T
MRSK02AT
MRSK02BT
MRSK02CT
40.50
83.00
83.00
90.00
133.00
133.00
133.00
Two Speed Switch—Class MMS, Single Phase and 3-Phase
Type of
Operator
Suitable
Motor Types
Switch Features (Including
Mechanical Interlock)
2
Single Phase
Two Winding
(3-Lead)
3
3-Phase
Separate Winding
(Wye-Connected)
Standard
(2) Red Pilot Devices—115V AC
(2) Red Pilot Devices—230V AC
Standard
(2) Red Pilot Lights—208–240V AC
(2) Red Pilot Lights—440–600V AC
Number of
Poles
Toggle
Manual switches do not include overloads.
Furnished with (1) 3/4" NPT outlet in bottom
(reversible
for top feed). In order to obtain a 3⁄4" NPT outlet in top
and bottom, add suffix letter “H” to type number and add
$16 to List Price.
16-8
General Purpose
Flush Mounting
NEMA Type 1
Open Switch with Flush Plate General Purpose
(No Enclosure Provided)
Enclosure Surface Mounting
Catalog Number List Price $ Catalog Number List Price $
MMSKF11
MMSKF11A
MMSKF11B
MMSKF22
MMSKF22B
MMSKF22C
163.00
302.00
302.00
258.00
396.00
396.00
Do
not use as replacement interiors for NEMA Type 4
metallic enclosures. For replacement unit, order
Type MMSK01 or MMSK02 and separate pilot light kit.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MMSKG11
MMSKG11A
MMSKG11B
MMSKG22
MMSKG22B
MMSKG22C
172.00
310.00
310.00
268.00
405.00
405.00
Replacement Switch
Class MRS
Catalog Number List Price $
MRSK01T
MRSK01AT
MRSK01BT
MRSK02T
MRSK02BT
MRSK02CT
40.50
83.00
83.00
90.00
133.00
133.00
For
switches that contain a pilot light, a Red light is
standard. For a Green pilot light add ”G” to the end
of the catalog number.
Discount Schedule NEMA
Manual Control
Starters and Switches, Class 11 - 3RV
Class 11 - 3RV
Class 11 across the line manual
starters and switches provide control
for machinery where remote start stop
control is not required.
Class 11 - 3RV manual starters are
used for single and poly-phase motors
up to 20HP @ 575V. Starters have
bimetallic heater elements to provide
class 10 overcurrent protection. Each
starter has a fourth bimetallic strip that
reacts only to the ambient temperature
inside the control panel. This ambient
compensation helps prevent the starter
from nuisance tripping when the panel
temperature is higher than the ambient
temperature of the motor.
A built-in differential trip bar causes the
starter to trip faster on a phase loss
condition to help reduce motor damage.
Magnetic trip elements in each starter
take the device off line when it senses
current of 13 times the maximum FLA
dial setting.
Class 11 - 3RV switches provide
control for inherently protected motors.
Typical applications include metal and
woodworking machinery, grinders,
power saws, conveyors, fans, pumps,
General
blowers, textile and packaging
machinery, and paper cutters.
Each switch is provided with magnetic
trip elements which take the device off
line when it senses current of 13 times
the maximum switch rating.
Class 11 - 3RV manual starters can be
used as Type E self-protected manual
combination starters (up to 22 amps)
per UL508 or as components in
Group Installation per NEC 430.53.
When using the Class 11 - 3RV as a
manual combination starter upstream
protection is not required.
Class 11 - 3RV controllers are available
with low voltage protection which will
automatically open the power poles
when the voltage drops or the power
is interrupted.
Controllers with the LVP option provide
the OSHA requirements for protecting
personnel from potential injury caused
by the automatic start-up of machinery
following a voltage drop or power
interruption when low voltage
protection is specified.
Class 11 - 3RV is available as Open
style, or in NEMA 1, NEMA 7 & 9 or
NEMA 7 & 9 / 3 & 4 enclosures.
Standard Features include:
▪ ON/OFF rotary handle with lockout
and visible trip indication
▪ Adjustment dial for setting to motor
FLA (Starters only)
▪ Low Voltage Protection (LVP) Option
▪ Short Circuit trip at 13 times the
maximum setting of the FLA dial
or rated current
▪ Ambient compensated up to 140°F
▪ Phase loss sensitivity
▪ Test trip function
▪ LVP Option Meets OSHA
Requirements
▪ UL Listed
▪ CSA Certified
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
OPEN TYPE
Starter
NEMA 1
General Purpose
NEMA 7 & 9
Div 1 & Div 2
Class I Group C & D
Class II Group E, F & G
NEMA 3 & 4, NEMA 7 & 9
Div 1 & Div 2
Class I Group C & D
Class II Group E, F & G
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-9
Manual Control
Starters and Switches, Class 11 - 3RV
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
Low Voltage Protection Coil Table
No heaters required.
Field modification kits see page 16-79.
Dimensions see page 16-101.
Wiring Diagrams see page 16-129.
For applications requiring a low voltage protection coil
see table at right.
60 Hz Voltage
Letter
120V
208V
240V
460V
*F
*D
*G
*H
*Add corresponding letter to end of base Class 11
catalog number for low voltage protection coil.
$96.00 list adder.
Note: The LVP option for Open type 3RV is available
from the factory, please order separately from the
field modification kits on page 16-80.
Class 11 Manual Motor Starter
The coil voltage should correspond with the
line voltage.
Manual Starter—Class 11 - 3RV
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
FLA
Adjustment
Range
0.11-0.16
0.14-0.2
0.18-0.25
0.22-0.32
0.28-0.4
0.35-0.5
0.45-0.63
0.55-0.8
0.7-1
0.9-1.25
1.1-1.6
1.4-2
1.8-2.5
2.2-3.2
2.8-4
3.5-5
4.5-6.3
5.5-8
7-10
9-12.5
11-16
14-20
17-22
20-25
Max HP
Enclosure
Single Phase
3-Phase
Open Type
HP Ratings
HP Ratings
115V
230V
200V
230V
460V
575V
Catalog Number
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1
1
1
1
3
3
1
1 1⁄2
2
3
3
5
5
7 1⁄2
7 1⁄2
1
1
1 1⁄2
2
3
3
5
7 1⁄2
7 1⁄2
7 1⁄2
1
1 1⁄2
1 1⁄2
2
3
5
5
7 1⁄2
7 1⁄2
10
15
15
15
1
1 1⁄2
1 1⁄2
2
3
3
5
5
10
10
15
20
20
20
3RV1021-0AA10
3RV1021-0BA10
3RV1021-0CA10
3RV1021-0DA10
3RV1021-0EA10
3RV1021-0FA10
3RV1021-0GA10
3RV1021-0HA10
3RV1021-0JA10
3RV1021-0KA10
3RV1021-1AA10
3RV1021-1BA10
3RV1021-1CA10
3RV1021-1DA10
3RV1021-1EA10
3RV1021-1FA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4BA10
3RV1021-4CA10
3RV1021-4DA10
1
⁄10
1
⁄8
1
⁄6
1
⁄4
1
⁄3
1
⁄2
1
⁄2
1
1 1⁄2
2
2
1
⁄10
⁄8
1
⁄6
1
⁄4
1
⁄3
1
⁄2
3
⁄4
1
1
1 1⁄2
2
3
3
3
5
⁄2
⁄4
3
⁄4
⁄2
⁄4
⁄2
3
⁄4
3
⁄4
1
⁄2
⁄2
3
⁄4
NEMA 1
NEMA 7 & 9
NEMA 3 & 4, NEMA 7 & 9
General Purpose
Class I Groups C & D
Class II Groups E, F & G
Watertight (Outdoor use)
Class I Groups C & D
Class II Groups E, F & G
List Price $ Catalog Number List Price $. Catalog Number List Price $
145.00
145.00
145.00
145.00
145.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
191.00
191.00
191.00
191.00
191.00
11AD3B
11BD3B
11CD3B
11DD3B
11ED3B
11FD3B
11GD3B
11HD3B
11JD3B
11KD3B
11LD3B
11MD3B
11ND3B
11PD3B
11QD3B
11RD3B
11SD3B
11TD3B
11UD3B
11VD3B
11WD3B
11XD3B
11YD3B
11ZD3B
160.00
160.00
160.00
160.00
160.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
189.00
233.00
233.00
233.00
233.00
233.00
11AD3H
11BD3H
11CD3H
11DD3H
11ED3H
11FD3H
11GD3H
11HD3H
11JD3H
11KD3H
11LD3H
11MD3H
11ND3H
11PD3H
11QD3H
11RD3H
11SD3H
11TD3H
11UD3H
11VD3H
11WD3H
11XD3H
11YD3H
11ZD3H
555.00
555.00
555.00
555.00
555.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
586.00
689.00
689.00
689.00
689.00
689.00
Catalog Number List Price $
11AD3W
11BD3W
11CD3W
11DD3W
11ED3W
11FD3W
11GD3W
11HD3W
11JD3W
11KD3W
11LD3W
11MD3W
11ND3W
11PD3W
11QD3W
11RD3W
11SD3W
11TD3W
11UD3W
11VD3W
11WD3W
11XD3W
11YD3W
11ZD3W
652.00
652.00
652.00
652.00
652.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
682.00
785.00
785.00
785.00
785.00
785.00
Manual Switch—Class 11 - 3RV
Rated
Current
1
5
10
20
25
Max HP
Enclosure
Single Phase
3-Phase
Open Type
HP Ratings
HP Ratings
115V
230V
200V
230V
—
—
1
6
1
2
2
1 1⁄2
3
5
—
1
3
5
7 1⁄2
—
1
3
7 1⁄2
7 1⁄2
⁄
1
⁄2
1 1⁄2
Instantaneous
⁄
460V
575V
Catalog Number
1
2
1
2
3
7 1⁄2
15
15
3
10
20
20
3RV1321-0JC10
3RV1321-1FC10
3RV1321-1JC10
3RV1321-4BC10
3RV1321-4DC10
⁄
Magnetic Trip will occur at 13 times
the maximum FLA dial setting or rated switch current.
Discount Code: IEC.
16-10
⁄
NEMA 1
NEMA 7 & 9
NEMA 3 & 4, NEMA 7 & 9
General Purpose
Class I Groups C & D
Class II Groups E, F & G
Watertight
Class I Groups C & D
Class II Groups E, F & G
List Price $. Catalog Number List Price $ Catalog Number List Price $
154.00
154.00
154.00
185.00
185.00
111D3B
112D3B
113D3B
114D3B
115D3B
Shaded
Ratings apply for Manual Motor Controllers
Only! These Ratings do not apply as UL Listed Manual
Combination Starters.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
189.00
189.00
189.00
233.00
233.00
111D3H
112D3H
113D3H
114D3H
115D3H
586.00
586.00
586.00
689.00
689.00
Catalog Number List Price $
111D3W
112D3W
113D3W
114D3W
115D3W
682.00
682.00
682.00
785.00
785.00
Add
1 to the end of the catalog number for 1/2 inch drain
hole with plug. Add $53. to the list price. Drain fitting not
supplied, order separately XDB-2.
Discount Schedule NEMA
Heavy Duty Control
Catalog Numbering System
General
ESP 100®
Current Range
Three Phase
A
B
D
E
F
Model
G
H
P — Thermal size 00– 4,
J
Solid state sizes 5
K
&6
L
S — ESP100 size 0–31⁄2
M
T — ESP100 size 4
U
H — ESP100 size 7 & 8
X
Y
Z
Enclosure Size
Class
17 — Combination Starter
Size
(Non Fusible, Fusible)
18 — Combination Starter
(Circuit Breaker)
25 — Reversing
Combination Starter
(Non Fusible, Fusible)
26 — Reversing
Combination Starter
(Circuit Breaker)
C
D
E
F
G
H
I
J
L
M
N
P
—
—
—
—
—
—
—
—
—
—
—
—
0
1
13⁄4
2
21⁄2
3
31⁄2
4
5
6
7
8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.25–1
.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
55–250
200–540
420–820
420–1220
Breaker HP Code
Horsepower Rating
200, 230, 460, 575
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
92 — Standard Width
82 — Extra Wide
Enclosure Type
B
F
H
N
W
—
—
—
—
—
NEMA
NEMA
NEMA
NEMA
NEMA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1
⁄2, 1⁄2,1, 1
1, 1, 3, 3
3, 3, 5, 5
3, 3, 71⁄2, 71⁄2
71⁄2, 71⁄2, 10, 10
—, —, 15, 15
10, 10, —, —
71⁄2, 10, 20, 20
10, 15, 25, 25
—, —, 30, 30
15, 20, —, —
—, —, 30, 30
25, 30, 50, 50
30, 40, 75, 75
40, 50, 100, 100
1
4X Fiberglass
7/9/3/4, bolted (Class 18 & 26 only)
12 Field convertible to 3/3R/4
4/4X Stainless Steel
Class
Pilot Control Circuit
14 — Across the Line NEMA
Size
36 — Non
C —
D —
E —
F —
G—
H —
I —
J —
L —
M—
N—
P —
Combination
Reduced
Voltage
Starter
37 — Combination
Reduced
Voltage
Starter
Single
Model
P — Thermal size 00–31⁄2,
G
S
T
H
—
—
—
—
Solid state sizes 5 &
6
Thermal size 4
ESP100 size 00–31⁄2
ESP100 size 4
ESP100 size 7 & 8
Model
0
1
13⁄4
2
21⁄2
3
31⁄2
4
5
6
7
8
S — ESP100
size 0–4
T — ESP100
size 5–6
H — ESP100
size 7 & 8
phase ESP100 available on Class 14 Starters
only.
used on Class 17, 25 or with ESP100 versions.
ESP 100®
Current Range
110V/190–220V@50Hz
C — 220–240V/440–480V@60Hz
190–220V/380–440V@50Hz
D — 200–208V@60Hz
.25–1
E
—
550–600V@60Hz
.75–3
550V@50Hz
2.5–10
F — 120V@60Hz
9–18
Power Poles/Enclosure Size
110V@50Hz
13–27
G — 220–240V@60Hz
20–40
1 — 2 power poles,1-phase
190–220V@50Hz
22–45
3 — 3 power poles, 3-phase
H — 440–480V@60Hz
30–60
82 — 3 power poles, 3-phase,
380–440V@50Hz
45–90
extra wide enclosure
J — 24V@60Hz
57–115
24V@50Hz
67–135
L — 277V@60Hz
55–250
240V@50Hz
200–540
Enclosure Type
420–820
420–1220
A — Open
B — NEMA 1
Single Phase
F — NEMA 4X Fiberglass
A — .25–1
H — NEMA 7/9/3/4 bolted
B — .75–3
0 — NEMA 12 Field convertible to 3/3R/4
D — 2.5–10
W — NEMA 4/4X Stainless Steel
E — 5–16
A
B
D
E
F
G
H
J
K
L
M
U
X
Y
Z
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Type
Line Volts
Enclosure Type
T — Auto XFMR
P — Part Wind.
0 — Wye Delta
2
3
4
5
6
A — Open
B — NEMA 1
W — NEMA 4/4X
Open Trans.
C — Wye Delta
Closed Trans.
Not available on sizes
For Class 37 only.
5–8.
—
—
—
—
—
230
380
460
575
200/208
Coil
D
E
F
Stainless Steel G
0 — NEMA 12
H
L
Disconnect Type
D — Non Fused Disc.
F — Fusible Disc.
P — MCP
Position used for ESP100 only.
Not available on sizes 7 and 8.
Not
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-11
NEMA & General
Purpose Control
Class
00
0
1
13⁄4 & 1P
2
21⁄2
3
31⁄2
4
5
6
7
8
A — 110–120V/220–240V@60Hz
CONTROL
PRODUCTS
—
—
—
—
—
—
—
—
—
—
—
—
—
3-wire control
(NO aux.
contact incl.)
Three Phase
Size
B
C
D
E
F
G
H
I
J
L
M
N
P
2 — suitable for
ESP 100
Current Range
Coil
16
Motor Starter
22 — Reversing NEMA Motor
Starter
40 — Across the Line NEMA
Magnetic Contactor
43 — Reversing NEMA Magnetic
Contactor
®
Heavy Duty Starters
Features and Benefits
General
NEMA starters are ideal for
applications requiring dependability
and durability. Typical applications
include use with machine tools, air
conditioning equipment, material
handling equipment, compressors,
hoists and various production and
industrial equipment as well as in
demanding automotive applications.
Starters are available as an open type
or in NEMA 1, 12/3/3R, 4 (painted), 4/4X
(stainless), 4X (fiberglass), and 7 & 9
enclosures.
are available to meet particular
application requirements
▪ Normally opened or normally closed
auxiliary power pole kits are available
for Sizes 00 through 13⁄4
▪ Transformers can be ordered as either
factory or field modifications.
In some cases these may require a
larger enclosure
▪ A full line of replacement parts are
available including contact kits, coils,
and overload relays
Gravity Dropout
For added reliability, the gravity dropout
of the armature and contacts is assisted
by stainless steel springs which help
provide quick, precise opening of the
contacts.
Standard Features
CONTROL
PRODUCTS
16
Size 00–4 magnetic starters include the
following standard features:
▪
▪
▪
▪
Rugged Industrial Design
▪
▪
▪
▪
▪
▪
Wide Range of Accessories
Half Sizes for Cost and Space Savings
Dual Voltage, Dual Frequency Coils
Solid State or Ambient Compensated
Bimetal Overload Protection
Terminal Design
Control terminals are self-rising
pressure type.
Gravity Dropout
Large Silver Cadmium Contacts
Dual Voltage/Frequency Coil
Overload Test Feature
Straight Thru Wiring
Application
NEMA & General
Purpose Control
45 Degree, Wedge Action Contacts
The 45 degree, wedge action contacts
reduce tracking and provide faster arc
quenching. The resulting self-cleaning
and reduced contact bounce mean
cooler operation and longer life for the
large silver cadmium oxide contacts.
Molded Coil
Magnetic coils are carefully wound and
then sealed in epoxy. Encapsulation
helps seal out moisture, promotes
heat transfer and resists electrical,
mechanical and thermal stresses.
Easy Coil Access
Heavy Duty starters are designed for
across the line starting of single phase
and polyphase motors.
These controls are available in NEMA
Sizes 00 through 8. In addition to the
usual NEMA Starter Sizes, Siemens
offers three exclusive Half Sizes; 13⁄4,
21⁄2 and 31⁄2. These integral sizes offer
the same rugged, industrial
construction as our NEMA Sizes and
ensure efficient operating performance.
Half Sizes provide a real cost savings
by cutting down on over capacity when
NEMA Sizes exceed the motor ratings.
All Siemens Heavy Duty controls,
including our popular Half Sizes comply
with applicable NEMA and UL tests.
All starters are supplied with a NO
holding interlock that in conjunction
with an appropriate pilot device will
provide low voltage protection or
release.
16-12
Part No
49D70084
Starters are available with dual voltage,
dual frequency coils. They are designed
to operate on either 50 or 60 Hertz.
Molded Stationary Contact Block
Thermoset materials resist arc tracking
and the stresses of heat and severe
impact.
Field Modification Kits
All starters can be modified in the field
with a complete range of accessories.
These include pushbuttons, selector
switches, pilot lights, auxiliary contacts
and surge suppressors.
Auxiliary Equipment
▪ NEMA starters are available with
built-in START-STOP push buttons
for 3-wire control or a
HAND-OFF-AUTO selector
switch for 2-wire control
▪ Field modifications such as auxiliary
contacts, pilot lights, push buttons,
selector switches, and fuse blocks
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Siemens Sizes 00–13⁄4 have as
standard, universal mounting which
fits the following:
Cutler Hammer—Citation Series
—Freedom Series
GE
—300 Line
Square D
—Type S
The Starter with its existing
backplate mounts onto the piggyback
mounting plate and is secured in
place with three mounting screws.
The piggyback mounting plate fits
the following:
Allen-Bradley
—Bulletin 509
—Bulletin 709
Westinghouse —Series A200
Size 5 & 6 Starters
Additional Features
▪ Solid State Overload (3RB type)
Standard
▪ Latest technology in arc quenching to
extend contactor life
▪ Wide variety of enclosures in all
starter configurations
Size 7 & 8 Starters
Additional Features
▪ New Compact Design
▪ Can be mounted in any position
▪ Same coil voltage is AC or DC
Heavy Duty Starters
Features and Benefits
Selection
Half Size Starters
Half-Size starters feature all the
rugged performance characteristics of
our NEMA rated starter sizes, but are
fractionally sized to more closely match
your exact motor rating. As a result,
significant economic savings are made
possible without sacrificing the reliability
you expect from a heavy duty starter.
ESP100® Solid State Starter
ESP100® starters combine the rugged
characteristics of a NEMA rated
contactor with a solid state overload
that provides phase loss protection.
It offers the industrial user greater
protection and added life for motors in
heavy duty applications. The inherent
benefits of the ESP100® ultimately
result in a cost savings to the user.
ESP100® Solid State Overload Relays
These standard features of the ESP100®
provide Extra Starter Performance.
These additional starter sizes have the
reserve capacity to handle occasional
plugging and jogging applications
without derating. Superior operating
performance in heavy duty applications
is assured by the large current carrying
parts, not by derating the device.
Typical Solid-State Overload
Adjustment Dial Markings
Each overload is precisely calibrated and
labels are individually laser printed and
then custom applied for each particular
calibration.
Exclusive “half-sizes” save potentially
hundreds, even thousands of dollars
per project.
Using the table below, simply match
the specific size starter to the
horsepower rating of your motor.
Every half-size starter saves you
money—up to 31%.
All “half-sizes” comply to applicable
NEMA and UL standards.
Savings for Siemens “Half-Size” Starters in NEMA 1 Enclosures, FVNR
Motor Size
230V
7 1⁄2
460V
Starter
Size
Half
Size
List Price $
“Half-Size”
Savings Over
Next Full Size
1
—
393.
—
15
—
13⁄4
521.
31%
15
25
2
—
737.
—
20
30
—
21⁄2
969.
20%
30
50
3
—
1202.
—
40
75
—
31⁄2
2321.
13%
50
100
4
—
2666.
—
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA & General
Purpose Control
10
10
CONTROL
PRODUCTS
Discount Schedule NEMA
Figure 1
16
▪ True phase loss protection; trips
within 3 seconds
▪ High accuracy trip curves; ± 2%
repeat trip accuracy
▪ Ease of use. Mount, wire, and set FLA
▪ Overload is self protected against
short circuits
▪ Overload is self powered and requires
no hard wiring or separate power
source
▪ Heaterless construction minimizes
energy costs and the costs of cabinet
ventilation or cooling
▪ Class 20 protection is standard. Class
10 and 30 protection are available
▪ Provides motor protection for
50/60 Hertz
ESP100® FLA Adjustment Dial—Set the
adjustment dial on the overload to the
FLA of the motor.
16-13
Heavy Duty Motor Starters
Solid State Overload with Manual Reset, Class 14
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see pages 16-79.
Factory Modifications see pages 16-94.
Dimensions see pages 16-102 open and 16-115 enclosed.
Wiring Diagrams see page 16-130.
Replacement Parts see pages 16-155.
Shipped as standard Class 20. For Class 10 or Class 30 see page 16-96.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
Open Type
NEMA 1
Standard Auxiliary
Contacts
General Purpose
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
NEMA 3 & 4
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Corrosion Resistant
316 Stainless Steel
(optional)
200
Volts
230
Volts
460
Volts
575
Volts
NEMA Half
Size
Size
Overload
Amp
Catalog
Range
Number
1
1
1
1
00
00
00
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
6
7
8
0.25–1
0.75–3
2.5–10
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55 - 250
160–540
420–820
420–1220
⁄6
⁄2
11⁄2
1
⁄6
1
⁄2
2
3
1
⁄6
1
⁄2
2
3
71⁄2
—
10
—
10
—
15
—
25
30
40
75
150
—
—
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
1
⁄6
⁄4
11⁄2
1
⁄6
3
⁄4
2
3
1
⁄6
3
⁄4
2
3
71⁄2
—
10
—
15
—
20
—
30
40
50
100
200
300
450
⁄3
11⁄2
2
1
⁄3
11⁄2
5
—
1
⁄3
11⁄2
5
10
—
15
—
15
25
30
—
30
50
75
100
200
400
600
900
3
⁄2
2
—
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
75
100
200
400
600
900
—
—
—
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
—
—
—
—
List
Catalog
Price $ Number
14BSA32A* 272.00
14BSB32A* 272.00
14BSD32A* 272.00
14CSA32A* 332.00
14CSB32A* 332.00
14CSD32A* 332.00
14CSE32A* 332.00
14DSA32A* 375.00
14DSB32A* 375.00
14DSD32A* 375.00
14DSE32A* 375.00
14DSF32A* 375.00
14ESF32A* 504.00
14ESG32A* 504.00
14FSF32A*
651.00
14FSH32A* 651.00
14GSH32A* 840.00
14GSJ32A* 840.00
14HSJ32A* 1030.00
14HSK32A* 1030.00
14ISL32A* 1960.00
14JTM32A* 2305.00
14LPU32A* 5573.00
14MPX32A* 13198.00
14NHY32A* 19547.00
14PHZ32A* 29223.00
14BSA32B*
14BSB32B*
14BSD32B*
14CSA32B*
14CSB32B*
14CSD32B*
14CSE32B*
14DSA32B*
14DSB32B*
14DSD32B*
14DSE32B*
14DSF32B*
14ESF32B*
14ESG32B*
14FSF32B*
14FSH32B*
14GSH32B*
14GSJ32B*
14HSJ32B*
14HSK32B*
14ISL32B*
14JTM32B*
14LPU32B*
14MPX32B*
14NHY32B*
14PHZ32B*
Div 1 and Div 2
Industrial Use
Class I Groups C & D
Weatherproof
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
289.00
289.00
289.00
349.00
349.00
349.00
349.00
393.00
393.00
393.00
393.00
393.00
521.00
521.00
737.00
737.00
969.00
969.00
1202.00
1202.00
2322.00
2666.00
6238.00
17507.00
23855.00
33530.00
—
—
—
651.00
651.00
651.00
651.00
702.00
702.00
702.00
702.00
702.00
831.00
831.00
1357.00
1357.00
1719.00
1719.00
2081.00
2081.00
3821.00
4165.00
8133.00
21814.00
28162.00
37837.00
—
—
—
716.00
716.00
716.00
716.00
773.00
773.00
773.00
773.00
773.00
914.00
914.00
1492.00
1492.00
1891.00
1891.00
2289.00
2289.00
4203.00
4582.00
—
—
—
—
Use Size 0
Use Size 0
Use Size 0
14CSA32W*
14CSB32W*
14CSD32W*
14CSE32W*
14DSA32W*
14DSB32W*
14DSD32W*
14DSE32W*
14DSF32W*
14ESF32W*
14ESG32W*
14FSF32W*
14FSH32W*
14GSH32W*
14GSJ32W*
14HSJ32W*
14HSK32W*
14ISL32W*
14JTM32W*
14LPU32E*
14MPX32E*
14NHY32E*
14PHZ32E*
Use Size 0
Use Size 0
Use Size 0
14CSA32F*
14CSB32F*
14CSD32F*
14CSE32F*
14DSA32F*
14DSB32F*
14DSD32F*
14DSE32F*
14DSF32F*
14ESF32F*
14ESG32F*
14FSF32F*
14FSH32F*
14GSH32F*
14GSJ32F*
14HSJ32F*
14HSK32F*
14ISL32F*
14JTM32F*
—
—
—
—
NEMA 12
NEMA 3/3R
List
Catalog
Price$ Number
Use Size 0 —
Use Size 0 —
Use Size 0 —
14CSA32H* 1434.00
14CSB32H* 1434.00
14CSD32H* 1434.00
14CSE32H* 1434.00
14DSA32H* 1477.00
14DSB32H* 1477.00
14DSD32H* 1477.00
14DSE32H* 1477.00
14DSF32H* 1477.00
14ESF32H* 1606.00
14ESG32H* 1606.00
14FSF32H* 2029.00
14FSH32H* 2029.00
14GSH32H* 2528.00
14GSJ32H* 2528.00
14HSJ32H* 3627.00
14HSK32H* 3627.00
14ISL32H* 4519.00
14JTM32H* 4864.00
14LPU32H* 11269.00
—
—
—
—
—
—
List
Price$
Use Size 0 —
Use Size 0 —
Use Size 0 —
14CSA320* 452.00
14CSB320* 452.00
14CSD320* 452.00
14CSE320* 452.00
14DSA320* 496.00
14DSB320* 496.00
14DSD320* 496.00
14DSE320* 496.00
14DSF320* 496.00
14ESF320*
625.00
14ESG320* 625.00
14FSF320*
926.00
14FSH320* 926.00
14GSH320* 1176.00
14GSJ320* 1176.00
14HSJ320* 1426.00
14HSK320* 1426.00
14ISL320* 3063.00
14JTM320* 3407.00
14LPU320* 8133.00
14MPX320* 19832.00
14NHY320* 26181.00
14PHZ320* 35855.00
Open Type & Standard Width Enclosure, Single Phase, 2-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
115
Volts
208/230
Volts
NEMA
Size
Overload
Amp
Range
Catalog
Number
1
1
0
0
0
1
1
1
0.75–3
2.5–10
5.0–16
0.75–3
2.5–10
5.0–16
14CSB12A*
14CSD12A*
14CSE12A*
14DSB12A*
14DSD12A*
14DSE12A*
⁄8
⁄4
1
1
⁄8
1
⁄4
1
1
⁄4
⁄2
2
1
⁄4
1
⁄2
2
1
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code) of
typical industrial motors. All starter sizes carry one
maximum Hp rating. For higher Hp single phase
motors, use 3-phase starters, wire and set per
diagram on page 16-130.
16-14
List
Catalog
Price $ Number
276.00
276.00
276.00
319.00
319.00
319.00
14CSB12B*
14CSD12B*
14CSE12B*
14DSB12B*
14DSD12B*
14DSE12B*
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel
(optional)
Industrial Use
Weatherproof
Corrosion Resistant
List
Catalog
Price $ Number
List
Catalog
Price $ Number
293.00
293.00
293.00
336.00
336.00
336.00
595.00
595.00
595.00
647.00
647.00
647.00
14CSB12W*
14CSD12W*
14CSE12W*
14DSB12W*
14DSD12W*
14DSE12W*
14CSB12F*
14CSD12F*
14CSE12F*
14DSB12F*
14DSD12F*
14DSE12F*
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
List
Catalog
Price $ Number
654.00
654.00
654.00
711.00
711.00
711.00
14CSB12H*
14CSD12H*
14CSE12H*
14DSB12H*
14DSD12H*
14DSE12H*
List
Catalog
Price $ Number
List
Price$
1379.00
1379.00
1379.00
1422.00
1422.00
1422.00
396.00
396.00
396.00
440.00
440.00
440.00
14CSB120*
14CSD120*
14CSE120*
14DSB120*
14DSD120*
14DSE120*
Dual voltage coils not available in size 5–8 starters.
For conduit hubs and conversion instructions, see page
F
16-87.
Coils D, F, or G will be wired for incoming voltage. J coil
will be wired for separate source. Coils E, H, and L do
not apply to single phase starters.
Enclosure is NEMA Type 4 (painted steel).
Only available F coil100-250V AC 50/60Hz, or DC
Standard Auxiliary Contacts, Same as Contactors,
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
coil 100-250V AC 50/60Hz, or DC,
H coil 150-500V AC 50/60Hz, or DC
refer to page 16-44.
316 Stainless Steel option see page 16-98.
For
Discount Schedule NEMA
Heavy Duty Motor Starters
Solid State Overload with Manual Reset, Class 14
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-115.
Wiring Diagrams see page 16-130.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
NEMA 1
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
575
Volts
NEMA
Size
Half
Size
Overload
Amp
Range
Catalog No
1
1
1
1
00
00
00
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
0.25–1
0.75–3
2.5–10
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
⁄6
1
⁄2
11⁄2
1
⁄6
1
⁄2
2
3
1
⁄6
1
⁄2
2
3
71⁄2
—
10
—
10
—
15
—
25
30
40
⁄6
3
⁄4
11⁄2
1
⁄6
3
⁄4
2
3
1
⁄6
3
⁄4
2
3
71⁄2
—
10
—
15
—
20
—
30
40
50
⁄3
11⁄2
2
1
⁄3
11⁄2
5
—
1
⁄3
11⁄2
5
10
—
15
—
15
25
30
—
30
50
75
100
⁄2
2
—
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
75
100
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating. For higher Hp single
phase motors, use 3-phase starters, wire and set
per diagram on page 16-130.
Discount Schedule NEMA
14BSA82B*
14BSB82B*
14BSD82B*
14CSA82B*
14CSB82B*
14CSD82B*
14CSE82B*
14DSA82B*
14DSB82B*
14DSD82B*
14DSE82B*
14DSF82B*
14ESF82B*
14ESG82B*
14FSF82B*
14FSH82B*
14GSH82B*
14GSJ82B*
14HSJ82B*
14HSK82B*
14ISL82B*
14JTM82B*
To
List Price $
Catalog No
List Price$
Catalog No
List Price $
Catalog No
List Price$
506.00
506.00
506.00
567.00
567.00
567.00
567.00
609.00
609.00
609.00
609.00
609.00
739.00
739.00
885.00
885.00
1074.00
1074.00
1391.00
1391.00
2409.00
2752.00
Use Size 0
Use Size 0
Use Size 0
14CSA82W*
14CSB82W*
14CSD82W*
14CSE82W*
14DSA82W*
14DSB82W*
14DSD82W*
14DSE82W*
14DSF82W*
14ESF82W*
14ESG82W*
14FSF82W*
14FSH82W*
14GSH82W*
14GSJ82W*
14HSJ82W*
14HSK82W*
14ISL82W*
14JTM82W*
—
—
—
961.00
961.00
961.00
961.00
1064.00
1064.00
1064.00
1064.00
1064.00
1193.00
1193.00
1951.00
1951.00
2140.00
2140.00
3821.00
3821.00
4751.00
5096.00
—
—
—
14CSA82H*
14CSB82H*
14CSD82H*
14CSE82H*
14DSA82H*
14DSB82H*
14DSD82H*
14DSE82H*
14DSF82H*
14ESF82H*
14ESG82H*
14FSF82H*
14FSH82H*
14GSH82H*
14GSJ82H*
14HSJ82H*
14HSK82H*
14ISL82H*
14JTM82H*
—
—
—
2196.00
2196.00
2196.00
2196.00
2264.00
2264.00
2264.00
2264.00
2264.00
2393.00
2393.00
3479.00
3479.00
4314.00
4314.00
5483.00
5483.00
9048.00
9368.00
Use Size 0
Use Size 0
Use Size 0
14CSA820*
14CSB820*
14CSD820*
14CSE820*
14DSA820*
14DSB820*
14DSD820*
14DSE820*
14DSF820*
14ESF820*
14ESG820*
14FSF820*
14FSH820*
14GSH820*
14GSJ820*
14HSJ820*
14HSK820*
14ISL820*
14JTM820*
—
—
—
625.00
625.00
625.00
625.00
668.00
668.00
668.00
668.00
668.00
797.00
797.00
1254.00
1254.00
1443.00
1443.00
2356.00
2356.00
3286.00
3631.00
receive a single phase starter in an extra wide
enclosure, order the enclosure kit from pg 16-96 and
the open style starter from page 16-14 or 16-16 as
separate items.
For conduit hubs and conversion instructions, see
page 16-87.
For
316 Stainless Steel option see page 16-97.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-15
NEMA & General
Purpose Control
460
Volts
CONTROL
PRODUCTS
230
Volts
NEMA 12
NEMA 3/3R
Industrial Use
Weatherproof
16
200
Volts
NEMA 7 & 9
NEMA 3 & 4
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G, Class III
Bolted Enclosures
Indoor/Outdoor Use
Heavy Duty Motor Starters
Ambient Compensated Bimetal Overload with Manual and Auto Reset, Class 14
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. Single phase starters require 1 heater
element. 3-phase starters require 3 heater elements.
Field Modification Kits page 16-79.
Factory Modifications page 16-94.
Dimensions see page 16-103 open and 16-115 enclosed.
Wiring Diagrams see page 16-130.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Max Hp
Enclosure
200
Volts
230
Volts
460
Volts
575
Volts
Contactor
Amp
NEMA Half
Rating Size
Size
1 1⁄2
3
7 1⁄2
10
10
15
25
30
40
1 1⁄2
3
7 1⁄2
10
15
20
30
40
50
2
5
10
15
25
30
50
75
100
2
5
10
15
25
30
50
75
100
9
18
27
40
45
60
90
115
135
00
0
1
—
2
—
3
—
4
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
Open Type
NEMA 1
Standard Auxiliary
Contacts
General Purpose
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
NEMA 3 & 4
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Corrosion Resistant
Industrial Use
Weatherproof
Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $
14BP32A*81 233.00 14BP32B*81
14CP32A*81 293.00 14CP32B*81
14DP32A*81 336.00 14DP32B*81
14EP32A*81 465.00 14EP32B*81
14FP32A*81 612.00 14FP32B*81
14GP32A*81 801.00 14GP32B*81
14HP32A*81 991.00 14HP32B*81
14IP32A*81 1922.00 14IP32B*81
14JG32A*81 2266.00 14JG32B*81
249.00
310.00
354.00
482.00
698.00
930.00
1163.00
2284.00
2628.00
Use Size 0
14CP32W*81
14DP32W*81
14EP32W*81
14FP32W*81
14GP32W*81
14HP32W*81
14IP32W*81
14JG32W*81
—
612.00
664.00
793.00
1319.00
1680.00
2042.00
3782.00
4126.00
Use Size 0
14CP32F*81
14DP32F*81
14EP32F*81
14FP32F*81
14GP32F*81
14HP32F*81
14IP32F*81
14JG32F*81
—
673.00
729.00
873.00
1450.00
1847.00
2247.00
4160.00
4539.00
Use Size 0
14CP32H*81
14DP32H*81
14EP32H*81
14FP32H*81
14GP32H*81
14HP32H*81
14IP32H*81
14JG32H*81
—
Use Size 0
1395.00 14CP320*81
1440.00 14DP320*81
1568.00 14EP320*81
1991.00 14FP320*81
2490.00 14GP320*81
3589.00 14HP320*81
4479.00 14IP320*81
4824.00 14JG320*81
—
414.00
457.00
586.00
888.00
1137.00
1387.00
3024.00
3368.00
Open Type & Standard Width Enclosure, Single Phase, 2-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Corrosion Resistant
304 Stainless Steel
Industrial Use
Weatherproof
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Corrosion Resistant
115
Volts
208/230
Volts
Contactor
Amp
NEMA
Rating
Size
Half
Size
Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $
1
1
2
3
5
7 1⁄2
10
9
18
27
35
45
60
—
—
—
—
—
21⁄2
14BP12A*81
14CP12A*81
14DP12A*81
14EP12A*81
14FP12A*81
14GP12A*81
⁄3
1
2
3
3
5
00
0
1
1P
2
—
203.00
262.00
306.00
400.00
555.00
754.00
14BP12B*81
14CP12B*81
14DP12B*81
14EP12B*81
14FP12B*81
14GP12B*81
219.00
279.00
323.00
418.00
418.00
875.00
Use Size 0
—
Use Size 0
14CP12W*81 582.00 14CP12F*81
14DP12W*81 633.00 14DP12F*81
14EP12W*81 728.00 14EP12F*81
14FP12W*81 1262.00 14FP12F*81
14GP12W*81 1623.00 14GP12F*81
—
639.00
696.00
801.00
1389.00
1786.00
Use Size 0
14CP12H*81
14DP12H*81
14EP12H*81
14FP12H*81
14GP12H*81
— Use Size 0
—
1365.00 14CP120*81 383.00
1409.00 14DP120*81 426.00
1503.00 14EP120*81 521.00
1934.00 14FP120*81 831.00
2442.00 14GP120*81 1090.00
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
200
Volts
1 1⁄2
3
7 1⁄2
10
10
15
25
30
40
230
Volts
1 1⁄2
3
7 1⁄2
10
15
20
30
40
50
Enclosure
460
Volts
2
5
10
15
25
30
50
75
100
575
Volts
2
5
10
15
25
30
50
75
100
NEMA 4/4X Stainless
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Contactor
Amp
NEMA Half
Rating
Size
Size Catalog No
9
00
— 14BP82B*81
18
0
— 14CP82B*81
27
1
— 14DP82B*81
40
—
1 3⁄4 14EP82B*81
45
2
— 14FP82B*81
60
—
2 1⁄2 14GP82B*81
90
3
— 14HP82B*81
115
—
3 1⁄2 14IP82B*81
135
4
— 14JG82B*81
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All Starter Sizes carry
one maximum Hp rating. For higher Hp single
phase motors, use 3-phase starters, wire and set
per diagram on page 16-130.
16-16
NEMA 1
List Price $
467.00
528.00
570.00
700.00
846.00
1035.00
1352.00
2284.00
2628.00
Catalog No
Use Size 0
14CP82W*81
14DP82W*81
14EP82W*81
14FP82W*81
14GP82W*81
14HP82W*81
14IP82W*81
14JG82W*81
List Price $
—
982.00
1025.00
1154.00
1912.00
2101.00
3782.00
4712.00
5057.00
To
receive a single phase starter in an extra wide
enclosure, order the enclosure kit from pg 16-90 and
the open style starter from pg 16-14 or 16-16 as
separate items.
For conduit hubs and conversion instructions, see
page 16-87.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Industrial Use
Weatherproof
Catalog No
Use Size 0
14CP82H*81
14DP82H*81
14EP82H*81
14FP82H*81
14GP82H*81
14HP82H*81
14IP82H*81
14JG82H*81
Catalog No
Use Size 0
14CP820*81
14DP820*81
14EP820*81
14FP820*81
14GP820*81
14HP820*81
14IP820*81
14JG820*81
List Price $
—
2156.00
2224.00
2355.00
3440.00
4275.00
5443.00
8899.00
9244.00
List Price $
—
586.00
629.00
758.00
1215.00
1404.00
2317.00
3248.00
3592.00
Coils
D, F, or G will be wired for incoming voltage.
S coil will be wired for separate source. Coils E, H,
and L do not apply to single phase starters.
Standard Auxiliary Contacts, Same as Contactors,
refer to page 16-44.
For 316 Stainless Steel option see page 16-97.
Discount Schedule NEMA
Combination Heavy Duty Starters
Features and Benefits
General
protect the control in varying degrees
from physical damage and harmful
atmospheres. All enclosures are
supplied with corrosion resistant
finishes.
New Heavy Duty Disconnect Switches
The disconnect switch that goes the
distance in durability, performance and
reliability has been made even better to
give you greater advantages:
Combination Starter
Features
Combination starters include
the following features:
A combination starter meets National
Electrical Code requirements for:
1. A means of providing short circuit
motor protection with fused or breaker
disconnection of line voltage.
▪ Reduce Lead-time - What used to
take days to get now takes minutes
▪ Reduced Inventory - Instead of
stocking scores of various combination starters, simply stock a few
enclosure kits, disconnect kits, circuit
breaker kits and open starters. With
these basic “building blocks” you
virtually have hundreds of products
on-hand
▪ Quality - The same high level of
quality you have been accustomed
to with our products will also be
found in these new enclosure kits
▪ UL Listed - By correctly following
the instructions included with the kits,
the product you build is
UL/CSA Listed
Refer to page 16-90 for more details.
Siemens Type ETI Circuit Breaker
The ETI circuit breaker is a device
designed specifically for application
in motor circuits. The ETI is a magnetic
only protective device designed to
provide protection against short
circuit current.
The instantaneous-only type ETI circuit
breaker employs adjustable magnetic
trip settings to allow broader application
ranges and a higher degree of motor
short circuit protection.
NEMA & General
Purpose Control
2. A means of safeguarding personnel
from contact with live parts and from
accidental starting of machinery by
disconnecting the motor and the
controller.
3. A motor controller with overload
protection.
Prewired combination starters eliminate
the cost of wiring between separate
disconnect and starter. Factory testing
assures field performance. Combination
starters also provide a more compact
and attractive installation than separate
units.
Enclosure Types
Combination starters are available in
NEMA 1, 12/3/3R/4 (painted), 4/4X
(stainless), 4X fiberglass and 7 & 9
enclosures. Enclosures protect
personnel from contact with live parts
and depending upon the construction,
CONTROL
PRODUCTS
Application
What Is In It For You!
16
▪ Manufactured with Cold Forming
“TOX” Process
▪ Solid State Overloads Standard on
Sizes 5–8
▪ Easy to Install
▪ Wide Range of Enclosure Types
Available
▪ Heavy Duty Quarter Turns
▪ 100kA Short Circuit Current Rating
when Protected with Class R Fuses
to 600V or MCP to 480V
▪ Visible Blade Disconnect
▪ Industrial Type Disconnect Handle
▪ Visible blades for the highest level
of safety
▪ Double break switching action to
reduce arcing, increase lifetime and
eliminate the “electric hinge”
▪ More rugged positive action switch
▪ Oversized lugs are standard
▪ Line side shield to help guard
personnel from contact with live parts
▪ Higher horsepower rating for
design E high efficiency motors
▪ Now UL listed for IIsco, Burndy and
T&B crimp type lugs
▪ The 200A switch now accepts up to
300 MCM versus 250 MCM wire size
Its rugged construction - with a high
fault withstand rating of 100kA at 600
VAC when fused with class R rated
fuses - meets the most stringent
industry standards set forth by the
automotive, petro-chemical, and pulp
and paper industries. UL recognized and
CSA certified, our disconnect switches
are available either non-fusible or fusible
with class R and class J fuse clips.
handle preinstalled. You install the
required starter and fusible disconnect,
connect the power wire and you are
finished. Within minutes, you have the
required combination starter in your
hands. No more waiting on the factory.
You need it, your got it!
Enclosure Kits for NEMA
Combination Starters Description
Now you can assemble a non-stocked
combination starter per your unanticipated needs in minutes. Say, for
example, your customer needs a fusible
combination starter that you don’t have
in stock. You need in now, but don’t
sweat it. Simply start with the newly
offered enclosure kit which has the
Heavy Duty Starters
These combination starters use the
same starters described in the heavy
duty starter section of this catalog.
ESP 100 solid state overload starters
and ambient compensated bimetal
overload starters are available.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-17
Combination Heavy Duty Starters
Non-Fusible with Solid State Overload, Class 17
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
For Fusible Styles see page 16-21.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3 Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
General Purpose
200
Volts
1
⁄6
1
⁄2
2
3
1
⁄6
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
20
30
40
75
150
—
—
230
Volts
1
⁄6
3
⁄4
2
3
1
⁄6
3
⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
25
40
50
100
200
300
450
460
Volts
1
⁄3
11⁄2
5
—
1
⁄3
11⁄2
5
10
—
15
—
15
25
30
—
30
50
75
100
200
400
600
900
575
Volts
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
75
100
200
400
600
900
NEMA
Size
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
6
7
8
Half
Size
—
—
—
—
—
—
—
—
—
1 3⁄4
1 3⁄4
—
—
2 1⁄2
2 1⁄2
—
—
3 1⁄2
—
—
—
—
—
Overload
Amp
Range
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55–250
160–540
420–820
420–1220
Disc
Amp
Rating
30
30
30
30
30
30
30
30
60
60
60
60
60
100
100
100
100
200
200
400
800
1200
1600
Catalog Number List Price $
17CSA92B*
823.00
17CSB92B*
823.00
17CSD92B*
823.00
17CSE92B*
823.00
17DSA92B*
865.00
17DSB92B*
865.00
17DSD92B*
865.00
17DSE92B*
865.00
17DSF92B*
865.00
17ESF92B*
995.00
17ESG92B*
995.00
17FSF92B*
1348.00
17FSH92B*
1348.00
17GSH92B*
1822.00
17GSJ92B*
1822.00
17HSJ92B*
2219.00
17HSK92B*
2219.00
17ISL92B*
3899.00
17JTM92B*
4243.00
17LPU92B*
9476.00
17MPX92B*
24941.00
17NHY92B*
31118.00
17PHZ92B*
41812.00
NEMA 4/4X Stainless
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Watertight, Dust-tight
Corrosion Resistant
Catalog Number
17CSA92W*
17CSB92W*
17CSD92W*
17CSE92W*
17DSA92W*
17DSB92W*
17DSD92W*
17DSE92W*
17DSF92W*
17ESF92W*
17ESG92W*
17FSF92W*
17FSH92W*
17GSH92W*
17GSJ92W*
17HSJ92W*
17HSK92W*
17ISL92W*
17JTM92W*
17LPU92E*
17MPX92E*
—
—
NEMA 12, NEMA 3/3R,
NEMA 4 Painted (thru Sz 4)
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number List Price $
1650.00
17CSA92F*
1814.00
1650.00
17CSB92F*
1814.00
1650.00
17CSD92F*
1814.00
1650.00
17CSE92F*
1814.00
1693.00
17DSA92F*
1863.00
1693.00
17DSB92F*
1863.00
1693.00
17DSD92F*
1863.00
1693.00
17DSE92F*
1863.00
1693.00
17DSF92F*
1863.00
1822.00
17ESF92F*
2003.00
1822.00
17ESG92F*
2003.00
2623.00
17FSF92F*
2886.00
2623.00
17FSH92F*
2886.00
4045.00
17GSH92F*
4450.00
4045.00
17GSJ92F*
4450.00
4440.00
17HSJ92F*
4886.00
4440.00
17HSK92F*
4886.00
6741.00
17ISL92F*
7415.00
7086.00
17JTM92F*
7795.00
16730.00
—
—
32694.00
—
—
—
—
—
—
—
—
Catalog Number
17CSA92N*
17CSB92N*
17CSD92N*
17CSE92N*
17DSA92N*
17DSB92N*
17DSD92N*
17DSE92N*
17DSF92N*
17ESF92N*
17ESG92N*
17FSF92N*
17FSH92N*
17GSH92N*
17GSJ92N*
17HSJ92N*
17HSK92N*
17ISL92N*
17JTM92N*
17LPU92N*
17MPX92N*
17NHY92N*
17PHZ92N*
List Price $
1030.00
1030.00
1030.00
1030.00
1072.00
1072.00
1072.00
1072.00
1072.00
1202.00
1202.00
1641.00
1641.00
2201.00
2201.00
2598.00
2598.00
4950.00
5294.00
11949.00
27912.00
33444.00
44139.00
Standard Width Enclosure, Single Phase, (Catalog Numbers are three phase, wire for single phase in the field)
Max Hp
Enclosure
NEMA 1
General Purpose
115
Volts
1
⁄8
1
⁄4
1
1
⁄8
1
⁄4
1
208/
230
Volts
1
⁄4
1
⁄2
2
1
⁄4
1
⁄2
2
NEMA
Size
0
0
0
1
1
1
Overload
Amp
Range
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
Disc
Amp
Rating
30
30
30
30
30
30
Catalog Number
17CSB92B*
17CSD92B*
17CSE92B*
17DSB92B*
17DSD92B*
17DSE92B*
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Dual voltage coils not available in modified starters or
in starter sizes 5–8.
For conduit hubs and conversion instructions, see page
16-87.
16-18
List Price $
823.00
823.00
823.00
865.00
865.00
865.00
NEMA 4/4X Stainless
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Watertight, Dust-tight
Corrosion Resistant
Catalog Number
17CSB92W*
17CSD92W*
17CSE92W*
17DSB92W*
17DSD92W*
17DSE92W*
List Price $
1650.00
1650.00
1650.00
1693.00
1693.00
1693.00
Catalog Number
17CSB92F*
17CSD92F*
17CSE92F*
17DSB92F*
17DSD92F*
17DSE92F*
For
For
60A disconnect, order fusible cat. no. page 16-21.
25 HP and 200A disconnect, order fusible cat. no.
page 16-21.
For 30HP and 200A disconnect, order fusible cat. no.
page 16-21.
For 600A disconnect, order fusible cat. no. page 16-21.
Enclosure is NEMA Type 4 (painted steel).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $
1814.00
1814.00
1814.00
1863.00
1863.00
1863.00
Catalog Number
17CSB92N*
17CSD92N*
17CSE92N*
17DSB92N*
17DSD92N*
17DSE92N*
List Price $
1030.00
1030.00
1030.00
1072.00
1072.00
1072.00
For
a single phase motor, multiply the motor
nameplate by 0.75 and set the OL dial to the
resulting value.
F coil 100-250V AC 50/60Hz, or DC,
H coil 150-500V AC 50/60Hz, or DC
Only available
F coil 100-250V AC 50/60Hz, or DC
For 316 Stainless Steel option see page 16-97.
Discount Schedule NEMA
Combination Heavy Duty Starters
Non-Fusible with Solid State Overload, Class 17
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
For Fusible Styles see page 16-21.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless
General Purpose
460
Volts
1
⁄3
11⁄2
5
—
1
⁄3
11⁄2
5
10
—
15
—
15
25
30
—
30
50
575
Volts
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
NEMA
Size
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
Half
Size
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
Catalog Number
17CSA82B*
17CSB82B*
17CSD82B*
17CSE82B*
17DSA82B*
17DSB82B*
17DSD82B*
17DSE82B*
17DSF82B*
17ESF82B*
17ESG82B*
17FSF82B*
17FSH82B*
17GSH82B*
17GSJ82B*
17HSJ82B*
17HSK82B*
List Price $
1037.00
1037.00
1037.00
1037.00
1082.00
1082.00
1082.00
1082.00
1082.00
1210.00
1210.00
1563.00
1563.00
2253.00
2253.00
2649.00
2649.00
Catalog Number
17CSA82W*
17CSB82W*
17CSD82W*
17CSE82W*
17DSA82W*
17DSB82W*
17DSD82W*
17DSE82W*
17DSF82W*
17ESF82W*
17ESG82W*
17FSF82W*
17FSH82W*
17GSH82W*
17GSJ82W*
17HSJ82W*
17HSK82W*
List Price $
2295.00
2295.00
2295.00
2295.00
2339.00
2339.00
2339.00
2339.00
2339.00
2468.00
2468.00
3270.00
3270.00
5337.00
5337.00
5733.00
5733.00
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number
17CSA82N*
17CSB82N*
17CSD82N*
17CSE82N*
17DSA82N*
17DSB82N*
17DSD82N*
17DSE82N*
17DSF82N*
17ESF82N*
17ESG82N*
17FSF82N*
17FSH82N*
17GSH82N*
17GSJ82N*
17HSJ82N*
17HSK82N*
List Price $
1416.00
1416.00
1416.00
1416.00
1461.00
1461.00
1461.00
1461.00
1461.00
1589.00
1589.00
2029.00
2029.00
2977.00
2977.00
3373.00
3373.00
CONTROL
PRODUCTS
230
Volts
1
⁄6
3
⁄4
2
3
1
⁄6
3
⁄4
2
3
71⁄2
—
10
—
15
—
20
—
20
Disc
Amp
Rating
30
30
30
30
30
30
30
30
60
60
60
60
60
100
100
100
100
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
16
200
Volts
1
⁄6
1
⁄2
2
3
1
⁄6
1
⁄2
2
3
71⁄2
—
10
—
10
—
15
—
20
Overload
Amp
Range
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
NEMA & General
Purpose Control
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one Hp rating.
Discount Schedule NEMA
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see page
For
16-87.
For 60A disconnect, order fusible cat. no. page 16-22.
For
25 HP and 200A disconnect, order fusible cat. no.
page 16-22.
30HP and 200A disconnect, order fusible cat. no.
page 16-22.
For 316 Stainless Steel option see page 16-97.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-19
Combination Heavy Duty Starters
Non-Fusible with Ambient Compensated Bimetal Overload, Class 17
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (3 required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
General Purpose
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
200
Volts
3
71⁄2
10
10
15
25
30
40
230
Volts
3
71⁄2
10
15
20
30
40
50
460
Volts
5
10
15
25
30
50
75
100
575
Volts
5
10
15
25
30
50
75
100
Contactor
Amp
Rating
18
27
40
45
60
90
115
135
Disc
NEMA Half Amp
Size
Size Rating
0
—
30
1
—
30
3
—
1 ⁄4
60
2
—
60
1
—
2 ⁄2
100
3
—
100
1
—
3 ⁄2
200
4
—
200
Catalog Number
17CP92B*81
17DP92B*81
17EP92B*81
17FP92B*81
17GP92B*81
17HP92B*81
17IP92B*81
17JP92B*81
List Price $
784.00
827.00
957.00
1309.00
1784.00
2180.00
3859.00
4204.00
NEMA 4/4X Stainless
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Watertight, Dust-tight
Corrosion Resistant
Catalog Number
17CP92W*81
17DP92W*81
17EP92W*81
17FP92W*81
17GP92W*81
17HP92W*81
17IP92W*81
17JP92W*81
Catalog Number
17CP92F*81
17DP92F*81
17EP92F*81
17FP92F*81
17GP92F*81
17HP92F*81
17IP92F*81
17JP92F*81
List Price $
1612.00
1654.00
1784.00
2584.00
4006.00
4403.00
6703.00
7048.00
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number List Price $
1773.00 17CP92N*81
991.00
1820.00 17DP92N*81
1033.00
1962.00 17EP92N*81
1163.00
2743.00 17FP92N*81
1602.00
4407.00 17GP92N*81
2163.00
4844.00 17HP92N*81
2559.00
7374.00 17IP92N*81
4910.00
7753.00 17JP92N*81
5254.00
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless
General Purpose
200
Volts
3
71⁄2
10
10
15
25
230
Volts
3
71⁄2
10
15
20
30
460
Volts
5
10
15
25
30
50
Contactor
575
Amp
Volts Rating
5
18
10
27
15
40
25
45
30
60
50
90
Disc
NEMA Half Amp
Size
Size Rating
0
—
30
1
—
30
3
—
1 ⁄4
60
2
—
60
1
—
2 ⁄2
100
3
—
100
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Catalog Number
17CP82B*81
17DP82B*81
17EP82B*81
17FP82B*81
17GP82B*81
17HP82B*81
List Price $
1000.00
1043.00
1172.00
1526.00
2214.00
2610.00
Catalog Number
17CP82W*81
17DP82W*81
17EP82W*81
17FP82W*81
17GP82W*81
17HP82W*81
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $
2256.00
2301.00
2430.00
3231.00
5298.00
5694.00
Catalog Number
17CP82N*81
17DP82N*81
17EP82N*81
17FP82N*81
17GP82N*81
17HP82N*81
List Price $
1379.00
1422.00
1551.00
1991.00
2938.00
3334.00
Standard Width Enclosure, Single Phase, (Catalog Numbers are three phase, wire for single phase in the field)
Max Hp
Enclosure
NEMA 1
General Purpose
115
Volts
1
2
3
3
5
208/ Contactor
Disc
230
Amp
NEMA Half Amp
Volts Rating
Size
Size Rating
2
18
0
—
30
3
27
1
—
30
5
35
1P
—
60
45
2
—
60
71⁄2
10
60
—
21⁄2 100
Catalog Number List Price $
17CP92B*81
784.00
17DP92B*81
827.00
17EP92B*81
957.00
17FP92B*81
1309.00
17GP92B*81
1784.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-20
NEMA 4/4X Stainless
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Watertight, Dust-tight
Corrosion Resistant
Catalog Number
17CP92W*81
17DP92W*81
17EP92W*81
17FP92W*81
17GP92W*81
List Price $
1612.00
1654.00
1784.00
2584.00
4006.00
Catalog Number
17CP92F*81
17DP92F*81
17EP92F*81
17FP92F*81
17GP92F*81
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see page
16-87.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
For
For
For
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $
1773.00
1820.00
1962.00
2743.00
4407.00
Catalog Number
17CP92N*81
17DP92N*81
17EP92N*81
17FP92N*81
17GP92N*81
List Price $
991.00
1033.00
1163.00
1602.00
2163.00
60A disc, order fusible cat. no. page 16-23.
200A disc, order fusible cat. no. page 16-23.
316 Stainless Steel option see page 16-97.
Discount Schedule NEMA
Combination Heavy Duty Starters
Fusible with Solid State Overload, Class 17
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
General Purpose
575
Volts
—
1
⁄2
—
2
—
5
—
—
1
⁄2
—
2
—
5
—
10
—
—
15
—
20
—
25
30
—
—
40
—
50
—
—
75
—
100
—
—
125
200
—
—
400
400
600
900
NEMA
Size
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
—
—
2
2
2
—
—
—
3
3
3
—
—
—
4
4
5
5
5
5
5
6
6
6
7���
8���
Half
Size
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
—
21⁄2
21⁄2
21⁄2
—
—
—
—
31⁄2
31⁄2
—
—
—
—
—
—
—
—
—
—
—
—
Overload
Amp
Range
0.25–1
0.25–1
0.75–3
0.75–3
2.5–10
2.5–10
9–18
0.25–1
0.25–1
0.75–3
0.75–3
2.5–10
2.5–10
9–18
9–18
13–27
13–27
13–27
20–40
13–27
22–45
22–45
22–45
22–45
30–60
30–60
45–90
45–90
45–90
57–115
57–115
67–135
67–135
55–250
55–250
55–250
55–250
55–250
160–540
160–540
160–540
420–820
420–1220
Disc
Amp
Rating
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
60
60
60
60
60
60
60
100
100
100
100
100
200
200
200
200
200
400
600
400
400
600
600
600
800
1200
1600
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Fuse Clip
Size
Amps/Volts
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
60A/250V
60A/600V
60A/250V
60A/600V
60A/250V
60A/600V
60A/600V
100A/600V
100A/250V
100A/600V
100A/250V
100A/600V
200A/250V
200A/250V
200A/600V
200A/250V
200A/600V
400A/250V
600A/250V���
200A/600V
400A/600V
600A/600V���
600A/250V
600A/600V
800A/600V
1200A/600V
1600A/600V
Dual
Catalog
Number
17CSA92B*10
17CSA92B*11
17CSB92B*10
17CSB92B*11
17CSD92B*10
17CSD92B*11
17CSE92B*10
17DSA92B*10
17DSA92B*11
17DSB92B*10
17DSB92B*11
17DSD92B*10
17DSD92B*11
17DSE92B*10
17DSE92B*11
17DSF92B*10
17DSF92B*12
17ESF92B*13
17ESG92B*12
17FSF92B*13
17FSH92B*12
17FSH92B*13
17GSH92B*13
17GSH92B*15
17GSJ92B*14
17HSJ92B*15
17HSK92B*14
17HSK92B*15
17HSK92B*16
17ISL92B*16
17ISL92B*17
17JTM92B*16
17JTM92B*17
17LPU92B*18
17LPU92B*20
17LPU92B*17
17LPU92B*19
17LPU92B*21
17MPX92B*20
17MPX92B*21
17MPX92B*23
17NHY92B*23
17PHZ92B*25
List
Price $
848.00
866.00
848.00
866.00
848.00
866.00
848.00
891.00
909.00
891.00
909.00
891.00
909.00
891.00
909.00
891.00
909.00
1055.00
1038.00
1409.00
1390.00
1409.00
1882.00
1959.00
1959.00
2356.00
2356.00
2356.00
2528.00
4208.00
4208.00
4553.00
4553.00
10114.00
10390.00
9786.00
10114.00
10390.00
25854.00
25854.00
26997.00
33174.00
46953.00
Catalog
Number
17CSA92W*10
17CSA92W*11
17CSB92W*10
17CSB92W*11
17CSD92W*10
17CSD92W*11
17CSE92W*10
17DSA92W*10
17DSA92W*11
17DSB92W*10
17DSB92W*11
17DSD92W*10
17DSD92W*11
17DSE92W*10
17DSE92W*11
17DSF92W*10
17DSF92W*12
17ESF92W*13
17ESG92W*12
17FSF92W*13
17FSH92W*12
17FSH92W*13
17GSH92W*13
17GSH92W*15
17GSJ92W*14
17HSJ92W*15
17HSK92W*14
17HSK92W*15
17HSK92W*16
17ISL92W*16
17ISL92W*17
17JTM92W*16
17JTM92W*17
17LPU92E*18
17LPU92E*20
17LPU92E*17
17LPU92E*19
17LPU92E*21
17MPX92E*20
17MPX92E*21
17MPX92E*23
—
—
Catalog
Number
17CSA92F*10
17CSA92F*11
17CSB92F*10
17CSB92F*11
17CSD92F*10
17CSD92F*11
17CSE92F*10
17DSA92F*10
17DSA92F*11
17DSB92F*10
17DSB92F*11
17DSD92F*10
17DSD92F*11
17DSE92F*10
17DSE92F*11
17DSF92F*10
17DSF92F*12
17ESF92F*13
17ESG92F*12
17FSF92F*13
17FSH92F*12
17FSH92F*13
17GSH92F*13
17GSH92F*15
17GSJ92F*14
17HSJ92F*15
17HSK92F*14
17HSK92F*15
17HSK92F*16
17ISL92F*16
17ISL92F*17
17JTM92F*16
17JTM92F*17
—
—
—
—
—
—
—
—
—
—
voltage coils not available in modified starters or
in starter sizes 5–8.
conduit hubs and conversion instructions, see page
16-87.
Use Class J fuses only.
Enclosure is NEMA Type 4 (painted steel).
For
List
Price $
1675.00
1693.00
1675.00
1693.00
1675.00
1693.00
1675.00
1719.00
1737.00
1719.00
1737.00
1719.00
1737.00
1719.00
1737.00
1719.00
1737.00
1882.00
1865.00
2684.00
2667.00
2684.00
4106.00
4182.00
4182.00
4578.00
4578.00
4578.00
4750.00
7051.00
7051.00
7396.00
7396.00
17368.00
17644.00
17039.00
17368.00
17644.00
33108.00
33108.00
34251.00
—
—
List
Price $
1843.00
1863.00
1843.00
1863.00
1843.00
1863.00
1843.00
1891.00
1911.00
1891.00
1911.00
1891.00
1911.00
1891.00
1911.00
1891.00
1911.00
2052.00
2071.00
2953.00
2935.00
2953.00
4517.00
4600.00
4600.00
5037.00
5037.00
5037.00
5226.00
7756.00
7756.00
8136.00
8136.00
—
—
—
—
—
—
—
—
—
—
NEMA 12, NEMA 3/3R,
NEMA 4 Painted (thru Sz 4)
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog
Number
17CSA92N*10
17CSA92N*11
17CSB92N*10
17CSB92N*11
17CSD92N*10
17CSD92N*11
17CSE92N*10
17DSA92N*10
17DSA92N*11
17DSB92N*10
17DSB92N*11
17DSD92N*10
17DSD92N*11
17DSE92N*10
17DSE92N*11
17DSF92N*10
17DSF92N*12
17ESF92N*13
17ESG92N*12
17FSF92N*13
17FSH92N*12
17FSH92N*13
17GSH92N*13
17GSH92N*15
17GSJ92N*14
17HSJ92N*15
17HSK92N*14
17HSK92N*15
17HSK92N*16
17ISL92N*16
17ISL92N*17
17JTM92N*16
17JTM92N*17
17LPU92N*18
17LPU92N*20
17LPU92N*17
17LPU92N*19
17LPU92N*21
17MPX92N*20
17MPX92N*21
17MPX92N*23
17NHY92N*23
17PHZ92N*25
List
Price $
1055.00
1073.00
1055.00
1073.00
1055.00
1073.00
1055.00
1098.00
1116.00
1098.00
1116.00
1098.00
1116.00
1098.00
1116.00
1098.00
1116.00
1262.00
1245.00
1702.00
1685.00
1702.00
2261.00
2338.00
2338.00
2735.00
2735.00
2735.00
2907.00
5259.00
5259.00
5604.00
5604.00
12664.00
12940.00
12336.00
12664.00
12940.00
28827.00
28827.00
29969.00
35499.00
49279.00
Single phase wiring page 16-130.
F coil 100-250V AC 50/60Hz, or DC,
H coil 150-500V AC 50/60Hz, or DC
available
F coil 100-250V AC 50/60Hz, or DC
For 316 Stainless Steel option see page 16-97.
Only
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-21
NEMA & General
Purpose Control
460
Volts
—
1
⁄3
—
11⁄2
—
5
—
—
1
⁄3
—
11⁄2
—
5
—
10
—
—
15
—
15
—
25
—
30
—
30
—
50
—
—
75
—
100
—
—
—
200
200
—
400
400
600
900
Watertight, Dust-tight
Corrosion Resistant
CONTROL
PRODUCTS
230
Volts
1
⁄6
—
3
⁄4
—
2
—
3
1
⁄6
—
3
⁄4
—
2
—
3
—
5
71⁄2
—
10
—
15
—
—
—
20
—
25
—
30
40
—
50
—
100
100
—
—
—
200
—
—
—
—
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
16
200
Volts
1
⁄6
—
1
⁄2
—
2
—
3
1
⁄6
—
1
⁄2
—
2
—
3
—
5
71⁄2
—
10
—
10
—
—
—
15
—
20
—
25
30
—
40
—
75
—
—
—
—
150
—
—
—
—
NEMA 4/4X Stainless
Combination Heavy Duty Starters
Fusible with Solid State Overload, Class 17
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Extra Wide Enclosure, 3-Phase, 3-Pole
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Max Hp
Enclosure
NEMA 4/4X St-less
General Purpose
Watertight, Dust-tight,
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Fuse
Clip Size
Amps/
200
230
460
575
NEMA
Half
Overload
Amp
Volts
Volts
Volts
Volts
Size
Size
Range
Rating
Volts
Catalog Number List Price $ Catalog Number
1
1
—
1
⁄3
—
11⁄2
—
5
—
—
1
⁄3
—
11⁄2
—
5
—
10
—
—
15
—
15
—
25
—
30
—
30
—
50
—
—
1
⁄2
—
2
—
5
—
—
1
⁄2
—
2
—
5
—
10
—
—
15
—
20
—
25
30
—
—
40
—
50
—
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
—
—
2
2
2
—
—
—
3
3
3
3
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
—
21⁄2
21⁄2
21⁄2
—
—
—
—
0.25–1
0.25–1
0.75–3
0.75–3
2.5–10
2.5–10
9–18
0.25–1
0.25–1
0.75–3
0.75–3
2.5–10
2.5–10
9–18
9–18
13–27
13–27
13–27
20–40
13–27
22–45
22–45
22–45
22–45
30–60
30–60
45–90
45–90
45–90
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
60
60
60
60
60
60
60
100
100
100
100
100
200
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
30A/600V
30A/250V
60A/250V
60A/600V
60A/250V
60A/600V
60A/250V
60A/600V
60A/600V
100A/600V
100A/250V
100A/600V
100A/250V
100A/600V
200A/250V
17CSA82B*10
17CSA82B*11
17CSB82B*10
17CSB82B*11
17CSD82B*10
17CSD82B*11
17CSE82B*10
17DSA82B*10
17DSA82B*11
17DSB82B*10
17DSB82B*11
17DSD82B*10
17DSD82B*11
17DSE82B*10
17DSE82B*11
17DSF82B*10
17DSF82B*12
17ESF82B*13
17ESG82B*12
17FSF82B*13
17FSH82B*12
17FSH82B*13
17GSH82B*13
17GSH82B*15
17GSJ82B*14
17HSJ82B*15
17HSK82B*14
17HSK82B*15
17HSK82B*16
⁄6
—
1
⁄2
—
2
—
3
1
⁄6
—
1
⁄2
—
2
—
3
—
5
71⁄2
—
10
—
10
—
—
—
15
—
20
—
25
⁄6
—
3
⁄4
—
2
—
3
1
⁄6
—
3
⁄4
—
2
—
3
—
5
71⁄2
—
10
—
15
—
—
—
20
—
25
—
30
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-22
Disc
Amp
NEMA 1
1064.00
1082.00
1064.00
1082.00
1064.00
1082.00
1064.00
1107.00
1125.00
1107.00
1125.00
1107.00
1125.00
1107.00
1125.00
1107.00
1125.00
1270.00
1254.00
1623.00
1606.00
1623.00
2313.00
2391.00
2391.00
2787.00
2787.00
2787.00
2955.00
17CSA82W*10
17CSA82W*11
17CSB82W*10
17CSB82W*11
17CSD82W*10
17CSD82W*11
17CSE82W*10
17DSA82W*10
17DSA82W*11
17DSB82W*10
17DSB82W*11
17DSD82W*10
17DSD82W*11
17DSE82W*10
17DSE82W*11
17DSF82W*10
17DSF82W*12
17ESF82W*13
17ESG82W*12
17FSF82W*13
17FSH82W*12
17FSH82W*13
17GSH82W*13
17GSH82W*15
17GSJ82W*14
17HSJ82W*15
17HSK82W*14
17HSK82W*15
17HSK82W*16
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number List Price $
2322.00
2339.00
2322.00
2339.00
2322.00
2339.00
2322.00
2365.00
2384.00
2365.00
2384.00
2365.00
2384.00
2365.00
2384.00
2365.00
2384.00
2512.00
2512.00
3331.00
3314.00
3331.00
5398.00
5475.00
5475.00
5871.00
5871.00
5871.00
6044.00
17CSA82N*10
17CSA82N*11
17CSB82N*10
17CSB82N*11
17CSD82N*10
17CSD82N*11
17CSE82N*10
17DSA82N*10
17DSA82N*11
17DSB82N*10
17DSB82N*11
17DSD82N*10
17DSD82N*11
17DSE82N*10
17DSE82N*11
17DSF82N*10
17DSF82N*12
17ESF82N*13
17ESG82N*12
17FSF82N*13
17FSH82N*12
17FSH82N*13
17GSH82N*13
17GSH82N*15
17GSJ82N*14
17HSJ82N*15
17HSK82N*14
17HSK82N*15
17HSK82N*16
1443.00
1461.00
1443.00
1461.00
1443.00
1461.00
1443.00
1486.00
1504.00
1486.00
1504.00
1486.00
1504.00
1486.00
1504.00
1486.00
1504.00
1650.00
1633.00
2088.00
2072.00
2088.00
3038.00
3114.00
3114.00
3510.00
3510.00
3510.00
3682.00
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see
page 16-87.
316 Stainless Steel option see page 16-97.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Combination Heavy Duty Starters
Fusible with Ambient Compensated Bimetal Overload, Class 17
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (3 required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
NEMA
Size
0
0
1
1
1
—
—
2
2
—
—
—
3
3
3
—
—
4
4
Half
Size
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
21⁄2
—
—
—
31⁄2
31⁄2
—
—
Disc
Amp
Rating
30
30
30
30
60
60
60
60
60
60
100
100
100
100
200
200
200
200
200
Fuse Clip
Size
Amps/Volts
30A/250V
30A/600V
30A/250V
30A/600V
60A/250V
60A/250V
60A/600V
60A/250V
60A/600V
60A/600V
100A/600V
100A/250V
100A/250V
100A/600V
200A/250V
200A/250V
200A/600V
200A/250V
200A/600V
NEMA 4/4X Stainless
NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel (optional)
Watertight, Dust-tight
Corrosion Resistant
Catalog
List
Number
Price $
17CP92W*1081 1637.00
17CP92W*1181 1655.00
17DP92W*1081 1680.00
17DP92W*1181 1698.00
17DP92W*1281 1698.00
17EP92W*1281 1827.00
17EP92W*1381 1844.00
17FP92W*1281 2628.00
17FP92W*1381 2645.00
17GP92W*1381 4066.00
17GP92W*1581 4143.00
17GP92W*1481 4143.00
17HP92W*1481 4540.00
17HP92W*1581 4540.00
17HP92W*1681 4712.00
17IP92W*1681 7013.00
17IP92W*1781 7013.00
17JP92W*1681 7357.00
17JP92W*1781 7357.00
Catalog
List
Number
Price $
17CP92F*1081 1802.00
17CP92F*1181 1821.00
17DP92F*1081 1848.00
17DP92F*1181 1868.00
17DP92F*1281 1868.00
17EP92F*1281 2011.00
17EP92F*1381 2029.00
17FP92F*1281 2891.00
17FP92F*1381 2910.00
17GP92F*1381 4473.00
17GP92F*1581 4580.00
17GP92F*1481 4580.00
17HP92F*1481 4994.00
17HP92F*1581 4994.00
17HP92F*1681 5184.00
17IP92F*1681 7714.00
17IP92F*1781 7714.00
17JP92F*1681 8092.00
17JP92F*1781 8092.00
Catalog
Number
17CP92B*1081
17CP92B*1181
17DP92B*1081
17DP92B*1181
17DP92B*1281
17EP92B*1281
17EP92B*1381
17FP92B*1281
17FP92B*1381
17GP92B*1381
17GP92B*1581
17GP92B*1481
17HP92B*1481
17HP92B*1581
17HP92B*1681
17IP92B*1681
17IP92B*1781
17JP92B*1681
17JP92B*1781
List
Price $
810.00
827.00
854.00
872.00
872.00
1000.00
1016.00
1353.00
1370.00
1844.00
1922.00
1922.00
2317.00
2317.00
2490.00
4168.00
4168.00
4514.00
4514.00
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog
Number
17CP92N*1081
17CP92N*1181
17DP92N*1081
17DP92N*1181
17DP92N*1281
17EP92N*1281
17EP92N*1381
17FP92N*1281
17FP92N*1381
17GP92N*1381
17GP92N*1581
17GP92N*1481
17HP92N*1481
17HP92N*1581
17HP92N*1681
17IP92N*1681
17IP92N*1781
17JP92N*1681
17JP92N*1781
List
Price $
1016.00
1034.00
1059.00
1077.00
1077.00
1206.00
1223.00
1646.00
1663.00
2223.00
2301.00
2301.00
2696.00
2696.00
3987.00
5220.00
5220.00
5564.00
5564.00
CONTROL
PRODUCTS
230
Volts
3
—
5
—
7 1⁄2
10
—
15
—
—
—
20
25
—
30
40
—
50
—
Contactor
460
575 Amp
Volts Volts Rating
—
—
18
5
5
18
—
—
27
10
10
27
—
—
27
—
—
40
15
15
40
—
—
45
25
25
45
—
30
60
30
—
60
—
—
60
—
—
90
50
50
90
—
—
90
—
—
115
75
75
115
—
—
135
100
100
135
NEMA 1
16
200
Volts
3
—
5
—
7 1⁄2
10
—
10
—
—
—
15
20
—
25
30
—
40
—
Enclosure
Extra Wide Enclosure, 3-Phase, 3-Pole
200
Volts
3
—
5
—
7 1⁄2
10
—
10
—
—
—
15
20
—
25
Enclosure
230
Volts
3
—
5
—
7 1⁄2
10
—
15
—
—
—
20
25
—
30
460
Volts
—
5
—
10
—
—
15
—
25
—
30
—
—
50
—
575
Volts
—
5
—
10
—
—
15
—
25
30
—
—
—
50
—
Contactor
Amp
Rating
18
18
27
27
27
40
40
45
45
60
60
60
90
90
90
NEMA
Size
0
0
1
1
1
—
—
2
2
—
—
—
3
3
3
Half
Size
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
21⁄2
—
—
—
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Disc
Amp
Rating
30
30
30
30
60
60
60
60
60
60
100
100
100
100
200
Fuse Clip
Size
Amps/Volts
30A/250V
30A/600V
30A/250V
30A/600V
60A/250V
60A/250V
60A/600V
60A/250V
60A/600V
60A/600V
100A/600V
100A/250V
100A/250V
100A/600V
200A/250V
NEMA 1
NEMA 4/4X Stainless
General Purpose
Watertight, Dust-tight
Industrial Use Weatherproof
304 Stainless Steel
316 Stainless Steel (optional)
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number
17CP82W*1081
17CP82W*1181
17DP82W*1081
17DP82W*1181
17DP82W*1281
17EP82W*1281
17EP82W*1381
17FP82W*1281
17FP82W*1381
17GP82W*1381
17GP82W*1581
17GP82W*1481
17HP82W*1481
17HP82W*1581
17HP92W*1681
Catalog Number
17CP82N*1081
17CP82N*1181
17DP82N*1081
17DP82N*1181
17DP82N*1281
17EP82N*1281
17EP82N*1381
17FP82N*1281
17FP82N*1381
17GP82N*1381
17GP82N*1581
17GP82N*1481
17HP82N*1481
17HP82N*1581
17HP92N*1681
Catalog Number
17CP82B*1081
17CP82B*1181
17DP82B*1081
17DP82B*1181
17DP82B*1281
17EP82B*1281
17EP82B*1381
17FP82B*1281
17FP82B*1381
17GP82B*1381
17GP82B*1581
17GP82B*1481
17HP82B*1481
17HP82B*1581
17HP92B*1681
List Price $
1026.00
1044.00
1068.00
1086.00
1086.00
1216.00
1233.00
1569.00
1586.00
2274.00
2352.00
2352.00
2748.00
2748.00
2490.00
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see page
For
List Price $
2283.00
2301.00
2326.00
2344.00
2344.00
2474.00
2491.00
3274.00
3291.00
5358.00
5436.00
5436.00
5832.00
5832.00
4712.00
NEMA 12, NEMA 3/3R,
NEMA 4 Painted
List Price $
1405.00
1423.00
1447.00
1465.00
1465.00
1595.00
1612.00
2034.00
2051.00
2998.00
3075.00
3075.00
3471.00
3471.00
3987.00
316 Stainless Steel option see page 16-97.
16-87.
Single phase wiring page 16-130.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-23
NEMA & General
Purpose Control
Max Hp
Combination Heavy Duty Starters
MCP Type with Solid State Overload, Class 18
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
General Purpose
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
200 230
460 575 NEMA Half
Volts Volts Volts Volts Size Size
1
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
50
75
100
150
—
—
—
—
1
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
75
100
125
200
250
300
400
450
1
5
—
1
5
7 1⁄2
10
15
—
15
25
30
—
30
50
75
100
150
200
250
400
500
600
800
900
1
5
—
1
5
10
—
15
—
20
25
30
—
30
50
75
100
200
—
300
400
500
600
800
900
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
5
6
6
7
7
8
8
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
—
—
—
—
—
—
—
—
Overload
Amp Range
Motor
Circuit
Interrupter
ETI
Amps
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55–250
55–250
160–540
160–540
420–820
420–820
420–1220
420–1220
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
16-24
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
250
400
400
600
800
1000
1200
1600
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3, 4
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel
(optional)
NEMA 12, NEMA 3/3R
NEMA 4 Painted (thru Sz 4)
Corrosion Resistant
Div 1 and Div 2
Industrial Use
Class I Groups C&D
Weatherproof
Class II Groups E, F&G Watertight, Dust-tight
Class III
Bolted Enclosures
Indoor/Outdoor Use
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Catalog
Price $ Number
18CSB92B*
18CSD92B*
18CSE92B*
18DSB92B*
18DSD92B*
18DSE92B*
18DSF92B*
18ESF92B*
18ESG92B*
18FSF92B*
18FSH92B*
18GSH92B*
18GSJ92B*
18HSJ92B*
18HSK92B*
18ISL92B*
18JTM92B*
18LPT92B*
18LPU92B*
18MPW92B*
18MPX92B*
18NHV92B*
18NHY92B*
18PHZ92B*
18PH192B*
1133.00
1133.00
1133.00
1176.00
1176.00
1176.00
1176.00
1305.00
1305.00
1305.00
1650.00
2192.00
2192.00
2381.00
2381.00
4837.00
5182.00
11967.00
11967.00
25349.00
25940.00
35021.00
35021.00
52095.00
52095.00
18CSB92W*
18CSD92W*
18CSE92W*
18DSB92W*
18DSD92W*
18DSE92W*
18DSF92W*
18ESF92W*
18ESG92W*
18FSF92W*
18FSH92W*
18GSH92W*
18GSJ92W*
18HSJ92W*
18HSK92W*
18ISL92W*
18JTM92W*
18LPT92E*
18LPU92E*
18MPW92E*
18MPX92E*
—
—
—
—
1960.00
1960.00
1960.00
2002.00
2002.00
2002.00
2002.00
2133.00
2133.00
2925.00
2925.00
4415.00
4415.00
4605.00
4605.00
7680.00
8024.00
19220.00
19811.00
29657.00
30247.00
—
—
—
—
18CSB92F*
18CSD92F*
18CSE92F*
18DSB92F*
18DSD92F*
18DSE92F*
18DSF92F*
18ESF92F*
18ESG92F*
18FSF92F*
18FSH92F*
18GSH92F*
18GSJ92F*
18HSJ92F*
18HSK92F*
18ISL92F*
18JTM92F*
—
—
—
—
—
—
—
—
2157.00
2157.00
2157.00
2204.00
2204.00
2204.00
2204.00
2346.00
2346.00
3218.00
3218.00
4856.00
4856.00
5065.00
5065.00
8448.00
8827.00
—
—
—
—
—
—
—
—
18CSB92H*
18CSD92H*
18CSE92H*
18DSB92H*
18DSD92H*
18DSE92H*
18DSF92H*
18ESF92H*
18ESG92H*
18FSF92H*
18FSH92H*
18GSH92H*
18GSJ92H*
18HSJ92H*
18HSK92H*
18ISL92H*
18JTM92H*
18LPT92H*
—
—
—
—
—
—
—
2360.00
2360.00
2360.00
2416.00
2416.00
2416.00
2416.00
3067.00
3067.00
3214.00
3214.00
4250.00
4250.00
5285.00
5285.00
6749.00
8214.00
16720.00
—
—
—
—
—
—
—
Dual
voltage coils not available in modified starters or
in starter sizes 5–8.
For conduit hubs and conversion instructions, see
page 16-87.
Enclosure is NEMA Type 4 (painted steel).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18CSB92N*
18CSD92N*
18CSE92N*
18DSB92N*
18DSD92N*
18DSE92N*
18DSF92N*
18ESF92N*
18ESG92N*
18FSF92N*
18FSH92N*
18GSH92N*
18GSJ92N*
18HSJ92N*
18HSK92N*
18ISL92N*
18JTM92N*
18LPT92N*
18LPU92N*
18MPW92N*
18MPX92N*
18NHV92N*
18NHY92N*
18PHZ92N*
18PH192N*
List
Price $
1340.00
1340.00
1340.00
1382.00
1382.00
1382.00
1382.00
1512.00
1512.00
1942.00
1942.00
2572.00
2572.00
2760.00
2760.00
5888.00
6233.00
13862.00
13862.00
27676.00
28266.00
37346.00
37346.00
54420.00
54420.00
F
coil 100-250V AC 50/60Hz, or DC,
H coil 150-500V AC 50/60Hz, or DC
Only available
F coil 100-250V AC 50/60Hz, or DC
For 316 Stainless Steel option see page 16-97.
Discount Schedule NEMA
Combination Heavy Duty Starters
MCP Type with Solid State Overload, Class 18
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 4/4X Stainless
NEMA 1
200
Volts
1
1
575
Volts
NEMA
Size
Half
Size
Overload Amp Range
1
5
—
1
5
7 1⁄2
10
15
—
15
25
30
—
30
50
1
5
—
1
5
10
—
15
—
20
25
30
—
30
50
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
18CSB82B*
18CSD82B*
18CSE82B*
18DSB82B*
18DSD82B*
18DSE82B*
18DSF82B*
18ESF82B*
18ESG82B*
18FSF82B*
18FSH82B*
18GSH82B*
18GSJ82B*
18HSJ82B*
18HSK82B*
List
Price $
1348.00
1348.00
1348.00
1391.00
1391.00
1391.00
1391.00
1520.00
1520.00
1865.00
1865.00
2623.00
2623.00
2812.00
2812.00
Catalog Number
18CSB82W*
18CSD82W*
18CSE82W*
18DSB82W*
18DSD82W*
18DSE82W*
18DSF82W*
18ESF82W*
18ESG82W*
18FSF82W*
18FSH82W*
18GSH82W*
18GSJ82W*
18HSJ82W*
18HSK82W*
List
Price $
2605.00
2605.00
2605.00
2649.00
2649.00
2649.00
2649.00
2779.00
2779.00
3571.00
3571.00
5708.00
5708.00
5897.00
5897.00
List
Catalog Number Price $
18CSB82N*
18CSD82N*
18CSE82N*
18DSB82N*
18DSD82N*
18DSE82N*
18DSF82N*
18ESF82N*
18ESG82N*
18FSF82N*
18FSH82N*
18GSH82N*
18GSJ82N*
18HSJ82N*
18HSK82N*
1727.00
1727.00
1727.00
1770.00
1770.00
1770.00
1770.00
1899.00
1899.00
2330.00
2330.00
3347.00
3347.00
3536.00
3536.00
CONTROL
PRODUCTS
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
15
—
20
—
30
460
Volts
16
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
230
Volts
Motor
Circuit
Interrupter
ETI Amps Catalog Number
NEMA 12, NEMA 3/3R,
Watertight, Dust-tight
NEMA 4 Painted
Corrosion Resistant
Industrial Use
304 Stainless Steel
Weatherproof
316 Stainless Steel (optional) Watertight, Dust-tight
General Purpose
NEMA & General
Purpose Control
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see
page 16-87.
316 Stainless Steel option see page 16-97.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-25
Combination Heavy Duty Starters
MCP Type with Ambient Compensated Bimetal Overload, Class 18
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (3 required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-117.
Wiring Diagrams see page 16-131.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
CONTROL
PRODUCTS
16
Contactor
200 230 460 575 Amp NEMA Half
Volts Volts Volts Volts Rating Size Size
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
10
10
15
—
25
30
40
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
15
15
20
—
30
40
50
1
3
5
1
3
7 1⁄2
10
15
—
20
25
30
—
30
50
75
100
1
3
5
1
3
7 1⁄2
10
15
—
20
25
30
—
30
50
75
100
18
18
18
27
27
27
27
40
40
45
45
60
60
90
90
115
135
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
Motor
Circuit
Interrupter
ETI Amps
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
316 Stainless Steel
Corrosion Resistant
(optional)
NEMA 7 & 9
NEMA 3 & 4
NEMA 12,NEMA 3/3R,
NEMA 4 Painted
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog
Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Price $
Catalog
Number
List
Price $
18CP92BA*81
18CP92BB*81
18CP92BC*81
18DP92BA*81
18DP92BB*81
18DP92BD*81
18DP92BE*81
18EP92BF*81
18EP92BG*81
18FP92BH*81
18FP92BJ*81
18GP92BK*81
18GP92BL*81
18HP92BM*81
18HP92BN*81
18IP92BP*81
18JP92BR*81
1094.00
1094.00
1094.00
1137.00
1137.00
1137.00
1137.00
1266.00
1266.00
1612.00
1612.00
2154.00
2154.00
2343.00
2343.00
4798.00
5143.00
1922.00
1922.00
1922.00
1965.00
1965.00
1965.00
1965.00
2094.00
2094.00
2886.00
2886.00
4376.00
4376.00
4565.00
4565.00
7641.00
7986.00
2114.00
2114.00
2114.00
2162.00
2162.00
2162.00
2162.00
2304.00
2304.00
3176.00
3176.00
4815.00
4815.00
5023.00
5023.00
8406.00
8786.00
2322.00
2322.00
2322.00
2377.00
2377.00
2377.00
2377.00
3028.00
3028.00
3175.00
3175.00
4212.00
4212.00
5247.00
5247.00
6711.00
8175.00
18CP92NA*81
18CP92NB*81
18CP92NC*81
18DP92NA*81
18DP92NB*81
18DP92ND*81
18DP92NE*81
18EP92NF*81
18EP92NG*81
18FP92NH*81
18FP92NJ*81
18GP92NK*81
18GP92NK*81
18HP92NM*81
18HP92NN*81
18IP92NP*81
18JP92NR*81
1301.00
1301.00
1301.00
1344.00
1344.00
1344.00
1344.00
1473.00
1473.00
1905.00
1905.00
2533.00
2533.00
2722.00
2722.00
5850.00
—
18CP92WA*81
18CP92WB*81
18CP92WC*81
18DP92WA*81
18DP92WB*81
18DP92WD*81
18DP92WE*81
18EP92WF*81
18EP92WG*81
18FP92WH*81
18FP92WJ*81
18GP92WK*81
18GP92WL*81
18HP92WM*81
18HP92WN*81
18IP92WP*81
18JP92WR*81
18CP92FA*81
18CP92FB*81
18CP92FC*81
18DP92FA*81
18DP92FB*81
18DP92FD*81
18DP92FE*81
18EP92FF*81
18EP92FG*81
18FP92FH*81
18FP92FJ*81
18GP92FK*81
18GP92FL*81
18HP92FM*81
18HP92FN*81
18IP92FP*81
18JP92FR*81
18CP92HA*81
18CP92HB*81
18CP92HC*81
18DP92HA*81
18DP92HB*81
18DP92HD*81
18DP92HE*81
18EP92HF*81
18EP92HG*81
18FP92HH*81
18FP92HJ*81
18GP92HK*81
18GP92HL*81
18HP92HM*81
18HP92HN*81
18IP92HP*81
18JP92HR*81
NEMA & General
Purpose Control
Extra Wide Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
NEMA 1
200
Volts
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
10
10
15
—
25
230
Volts
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
15
15
20
—
30
460
Volts
1
3
5
1
3
7 1⁄2
10
15
—
20
25
30
—
30
50
575
Volts
1
3
5
1
3
7 1⁄2
10
15
—
20
25
30
—
30
50
Contactor
Amp
Rating
NEMA
Size
18
18
18
27
27
27
27
40
40
45
45
60
60
90
90
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-26
Half
Size
Motor Circuit
Interrupter ETI Amps
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
NEMA 4/4X Stainless
NEMA 12, NEMA 3/3R,
Watertight, Dust-tight
NEMA 4 Painted
Corrosion Resistant
Industrial Use
304 Stainless Steel
Weatherproof
316 Stainless Steel (optional) Watertight, Dust-tight
General Purpose
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
18CP82BA*81
18CP82BB*81
18CP82BC*81
18DP82BA*81
18DP82BB*81
18DP82BD*81
18DP82BE*81
18EP82BF*81
18EP82BG*81
18FP82BH*81
18FP82BJ*81
18GP82BK*81
18GP82BL*81
18HP82BM*81
18HP82BN*81
1309.00
1309.00
1309.00
1353.00
1353.00
1353.00
1353.00
1482.00
1482.00
1826.00
1826.00
1826.00
2584.00
2774.00
2774.00
18CP82WA*81
18CP82WB*81
18CP82WC*81
18DP82WA*81
18DP82WB*81
18DP82WD*81
18DP82WE*81
18EP82WF*81
18EP82WG*81
18FP82WH*81
18FP82WJ*81
18GP82WK*81
18GP82WL*81
18HP82WM*81
18HP82WN*81
2567.00
2567.00
2567.00
2610.00
2610.00
2610.00
2610.00
2739.00
2739.00
3532.00
3532.00
3532.00
5668.00
5859.00
5859.00
18CP82NA*81
18CP82NB*81
18CP82NC*81
18DP82NA*81
18DP82NB*81
18DP82ND*81
18DP82NE*81
18EP82NF*81
18EP82NG*81
18FP82NH*81
18FP82NJ*81
18GP82NK*81
18GP82NL*81
18HP82NM*81
18HP82NN*81
1688.00
1688.00
1688.00
1732.00
1732.00
1732.00
1732.00
1861.00
1861.00
2291.00
2291.00
2291.00
3308.00
3498.00
3498.00
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see
For
316 Stainless Steel option see page 16-97.
page 16-87.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Reversing Heavy Duty Starters
Solid State Overload with Manual Reset, Class 22
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-104 open and 16-120 enclosed.
Wiring Diagrams see page 16-132.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
Overload
200 230 460 575 NEMA Half Amp
Catalog
Volts Volts Volts Volts Size Size Range
Number
1
1
1
1
⁄2
2
—
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
75
100
200
400
600
900
00
00
00
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
6
7
8
—
—
—
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
—
—
—
—
0.25–1
0.75–3
2.5–10
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55–250
160–540
420–820
420–1220
22BSA32A* 598.00
22BSB32A* 598.00
22BSD32A* 598.00
22CSA32A* 702.00
22CSB32A* 702.00
22CSD32A* 702.00
22CSE32A* 702.00
22DSA32A* 789.00
22DSB32A* 789.00
22DSD32A* 789.00
22DSE32A* 789.00
22DSF32A* 789.00
22ESF32A* 1047.00
22ESG32A* 1047.00
22FSF32A* 1461.00
22FSH32A* 1461.00
22GSH32A* 1926.00
22GSJ32A* 1926.00
22HSJ32A* 2399.00
22HSK32A* 2399.00
22ISL32A* 5112.00
22JTM32A* 5802.00
22LPU32A* 11113.00
22MPX32A* 26172.00
22NHY32A* 37088.00
22PHZ32A* 54541.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All Starter Sizes carry
one maximum Hp rating.
Dual voltage coils not available in size 5–8 starters.
For conduit hubs and conversion instructions, see
page 16-87.
Discount Schedule NEMA
Watertight, Dust-tight
Corrosion Resistant
List
Catalog
Price $ Number
22BSA32B* 633.00
22BSB32B* 633.00
22BSD32B* 633.00
22CSA32B* 737.00
22CSB32B* 737.00
22CSD32B* 737.00
22CSE32B*
737.00
22DSA32B* 840.00
22DSB32B* 840.00
22DSD32B* 840.00
22DSE32B* 840.00
22DSF32B*
840.00
22ESF32B* 1098.00
22ESG32B* 1098.00
22FSF32B* 1598.00
22FSH32B* 1598.00
22GSH32B* 2115.00
22GSJ32B* 2115.00
22HSJ32B* 2640.00
22HSK32B* 2640.00
22ISL32B* 5561.00
22JTM32B* 6250.00
22LPU32B* 13707.00
22MPX32B* 30480.00
22NHY32B* 41395.00
22PHZ32B* 58849.00
Use Size 0
Use Size 0
Use Size 0
22CSA32W*
22CSB32W*
22CSD32W*
22CSE32W*
22DSA32W*
22DSB32W*
22DSD32W*
22DSE32W*
22DSF32W*
22ESF32W*
22ESG32W*
22FSF32W*
22FSH32W*
22GSH32W*
22GSJ32W*
22HSJ32W*
22HSK32W*
22ISL32W*
22JTM32W*
22LPU32E*
22MPX32E*
—
—
F coil 100-250V AC 50/60Hz, or DC
H coil 150-500V AC 50/60Hz, or DC
Div 1 and Div 2
Class I Groups C & D
Industrial Use
Weatherproof
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
List
Price $
Catalog
Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Price $
—
—
—
1133.00
1133.00
1133.00
1133.00
1391.00
1391.00
1391.00
1391.00
1391.00
1650.00
1650.00
2494.00
2494.00
3227.00
3227.00
3968.00
3968.00
7903.00
8594.00
16739.00
34788.00
—
—
Use Size 0
Use Size 0
Use Size 0
22CSA32F*
22CSB32F*
22CSD32F*
22CSE32F*
22DSA32F*
22DSB32F*
22DSD32F*
22DSE32F*
22DSF32F*
22ESF32F*
22ESG32F*
22FSF32F*
22FSH32F*
22GSH32F*
22GSJ32F*
22HSJ32F*
22HSK32F*
22ISL32F*
22JTM32F*
—
—
—
—
—
—
—
1246.00
1246.00
1246.00
1246.00
1531.00
1531.00
1531.00
1531.00
1531.00
1814.00
1814.00
2743.00
2743.00
3549.00
3549.00
4365.00
4365.00
8694.00
9454.00
—
—
—
—
—
—
—
2330.00
2330.00
2330.00
2330.00
2442.00
2442.00
2442.00
2442.00
2442.00
2701.00
2701.00
4054.00
4054.00
5165.00
5165.00
6491.00
6491.00
11730.00
12418.00
—
—
—
—
—
—
—
891.00
891.00
891.00
891.00
995.00
995.00
995.00
995.00
995.00
1254.00
1254.00
1856.00
1856.00
2528.00
2528.00
3210.00
3210.00
6440.00
7128.00
15127.00
33665.00
43721.00
61175.00
For single phase, select a starter with bimetal OL on
page 16-28.
only NEMA 4 (painted steel).
Enclosure is rated
Only available
NEMA 12
NEMA 3/3R
Use Size 0
Use Size 0
Use Size 0
22CSA32H*
22CSB32H*
22CSD32H*
22CSE32H*
22DSA32H*
22DSB32H*
22DSD32H*
22DSE32H*
22DSF32H*
22ESF32H*
22ESG32H*
22FSF32H*
22FSH32H*
22GSH32H*
22GSJ32H*
22HSJ32H*
22HSK32H*
22ISL32H*
22JTM32H*
—
—
—
—
Use Size 0
Use Size 0
Use Size 0
22CSA320*
22CSB320*
22CSD320*
22CSE320*
22DSA320*
22DSB320*
22DSD320*
22DSE320*
22DSF320*
22ESF320*
22ESG320*
22FSF320*
22FSH320*
22GSH320*
22GSJ320*
22HSJ320*
22HSK320*
22ISL320*
22JTM320*
22LPU320*
22MPX320*
22NHY320*
22PHZ320*
Only
available
F coil 100-250V AC 50/60Hz, or DC
contacts
22B-22E 4th pole built-in
22F-22J 2 NO & 2 NC
Auxiliary
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-27
NEMA & General
Purpose Control
⁄3
11⁄2
2
1
⁄3
1 1⁄2
5
—
1
⁄3
1 1⁄2
5
10
—
15
—
15
25
30
—
30
50
75
100
200
400
600
900
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
NEMA 7 & 9
NEMA 3 & 4
CONTROL
PRODUCTS
⁄6
⁄4
11⁄2
1
⁄6
3
⁄4
2
3
1
⁄6
3
⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
100
200
300
450
3
NEMA 4X
Fiberglass
16
⁄6
⁄2
11⁄2
1
⁄6
1
⁄2
2
3
1
⁄6
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
75
150
—
—
1
List
Catalog
Price $ Number
NEMA 4/4X
Stainless
Reversing Heavy Duty Starters
Ambient Compensated Bimetal Overload with Manual and Auto Reset, Class 22
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. Single phase starters require 1 heater
element. 3-phase starters require 3 heater elements.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-104 open and 16-120 enclosed.
Wiring Diagrams see page 16-132.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
Open Type
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Indoor/Outdoor Use
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Class I Groups C & D
Industrial Use
Weatherproof
CONTROL
PRODUCTS
16
Class II Groups E, F & G
Class III
Contactor
200 230 460 575 Amp NEMA Half Catalog
Volts Volts Volts Volts Rating Size Size Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
1 1⁄2
3
7 1⁄2
10
10
15
25
30
40
561.00
664.00
750.00
1008.00
1422.00
1887.00
2360.00
5075.00
5763.00
595.00
698.00
801.00
1060.00
1559.00
2077.00
2602.00
5522.00
6212.00
1 1⁄2
3
7 1⁄2
10
15
20
30
40
50
2
2
5
5
10 10
15 15
25 25
30 30
50 50
75 75
100 100
9
18
27
40
45
60
90
115
135
00
0
1
—
2
—
3
—
4
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
Bolted Enclosures
22BP32A*81
22CP32A*81
22DP32A*81
22EP32A*81
22FP32A*81
22GP32A*81
22HP32A*81
22IP32A*81
22JG32A*81
22BP32B*81
22CP32B*81
22DP32B*81
22EP32B*81
22FP32B*81
22GP32B*81
22HP32B*81
22IP32B*81
22JG32B*81
List
Price $
Use Size 0
22CP32W*81
22DP32W*81
22EP32W*81
22FP32W*81
22GP32W*81
22HP32W*81
22IP32W*81
22JG32W*81
—
1094.00
1353.00
1612.00
2456.00
3187.00
3928.00
7866.00
8554.00
Catalog
Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
List
Price $
Use Size 0
22CP32F*81
22DP32F*81
22EP32F*81
22FP32F*81
22GP32F*81
22HP32F*81
22IP32F*81
22JG32F*81
—
1203.00
1489.00
1773.00
2702.00
3506.00
4322.00
8653.00
9410.00
—
2291.00
2403.00
2663.00
4014.00
5126.00
6452.00
11691.00
12381.00
—
854.00
957.00
1215.00
1819.00
2490.00
3170.00
6401.00
7090.00
Use Size 0
22CP32H*81
22DP32H*81
22EP32H*81
22FP32H*81
22GP32H*81
22HP32H*81
22IP32H*81
22JG32H*81
Use Size 0
22CP320*81
22DP320*81
22EP320*81
22FP320*81
22GP320*81
22HP320*81
22IP320*81
22JG320*81
Open Type & Standard Width Enclosure, Single Phase, 3-Wire, 2-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Corrosion Resistant
304 Stainless Steel
Industrial Use
Weatherproof
Corrosion Resistant
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
NEMA & General
Purpose Control
Class III
115
Volts
208/
230
Volts
1
⁄3
1
2
3
1
2
3
5
Bolted Enclosures
Indoor/Outdoor Use
Contactor
Amp
NEMA Catalog
Rating
Size
Number
List
Catalog
Price $ Number
9
18
27
35
521.00
625.00
711.00
969.00
00
0
1
1P
22BP12A*81
22CP12A*81
22DP12A*81
22EP12A*81
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All Starter Sizes carry
one maximum Hp rating.
16-28
List
Catalog
Price $ Number
22BP12B*81 555.00
22CP12B*81 658.00
22DP12B*81 762.00
22EP12B*81 1021.00
List
Price $
Use Size 0
—
22CP12W*81 1055.00
22DP12W*81 1314.00
22EP12W*81 1572.00
Catalog
Number
List
Catalog
Price $ Number
List
Catalog
Price $ Number
Use Size 0
22CP12F*81
22DP12F*81
22EP12F*81
—
1162.00
1446.00
1730.00
—
1162.00
1446.00
1730.00
For
conduit hubs and conversion instructions, see
page 16-87.
Coil D, F, or G will be wired for Incoming Voltage.
J coil will be wired for 24V separate source. Coils E,
H, and L do not apply to single phase starters.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Use Size 0
22CP12H*81
22DP12H*81
22EP12H*81
Use Size 0
22CP120*81
22DP120*81
22EP120*81
List
Price $
—
814.00
917.00
1176.00
Auxiliary
contacts
22B-22E 4th pole built-in
22F-22J 2 NO & 2 NC
Discount Schedule NEMA
Combination Reversing Heavy Duty Starters
Non-Fusible, Class 25
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (3 required)
Fuse clips see page 16-95.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page16-122.
Wiring Diagrams see page16-133.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure with Solid State Overload, 3-Phase, 3-Pole
Max Hp
Enclosure
575
Volts
NEMA
Size
Half
Size
Amp
Range
1
1
1
⁄3
1 1⁄2
5
—
1
⁄3
1 1⁄2
5
10
—
15
—
15
25
30
—
30
50
75
100
200
400
600
900
1
⁄2
2
5
—
1
⁄2
2
5
10
—
15
—
20
25
30
—
40
50
75
100
200
400
600
900
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
6
7
8
—
—
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
—
—
—
—
0.25–1
0.75–3
2.5–10
9–18
0.25–1
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55–250
160–540
420–820
420–1220
30
30
30
30
30
30
30
30
60
60
60
60
60
100
100
100
100
200
200
400
800
1200
1600
⁄6
⁄2
2
3
1
⁄6
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
20
30
40
75
150
—
—
1
⁄6
⁄4
2
3
1
⁄6
3
⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
25
40
50
100
200
300
450
3
Watertight, Dust-tight
Corrosion Resistant
NEMA 12
NEMA 3/3R
NEMA 4 Painted
(thru Sz 4)
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
25CSA92B*
25CSB92B*
25CSD92B*
25CSE92B*
25DSA92B*
25DSB92B*
25DSD92B*
25DSE92B*
25DSF92B*
25ESF92B*
25ESG92B*
25FSF92B*
25FSH92B*
25GSH92B*
25GSJ92B*
25HSJ92B*
25HSK92B*
25ISL92B*
25JTM92B*
25LPU92B*
25MPX92B*
25NHY92B*
25PHZ92B*
1323.00
1323.00
1323.00
1323.00
1409.00
1409.00
1409.00
1409.00
1409.00
1667.00
1667.00
2330.00
2330.00
3364.00
3364.00
3838.00
3838.00
7310.00
7999.00
15576.00
38686.00
52457.00
67132.00
25CSA92W*
25CSB92W*
25CSD92W*
25CSE92W*
25DSA92W*
25DSB92W*
25DSD92W*
25DSE92W*
25DSF92W*
25ESF92W*
25ESG92W*
25FSF92W*
25FSH92W*
25GSH92W*
25GSJ92W*
25HSJ92W*
25HSK92W*
25ISL92W*
25JTM92W*
25LPU92E*
25MPX92E*
—
—
2373.00
2373.00
2373.00
2373.00
2459.00
2459.00
2459.00
2459.00
2459.00
2718.00
2718.00
3933.00
3933.00
6173.00
6173.00
6646.00
6646.00
10859.00
11548.00
23408.00
42993.00
—
—
25CSA92F*
25CSB92F*
25CSD92F*
25CSE92F*
25DSA92F*
25DSB92F*
25DSD92F*
25DSE92F*
25DSF92F*
25ESF92F*
25ESG92F*
25FSF92F*
25FSH92F*
25GSH92F*
25GSJ92F*
25HSJ92F*
25HSK92F*
25ISL92F*
25JTM92F*
—
—
—
—
2611.00
2611.00
2611.00
2611.00
2705.00
2705.00
2705.00
2705.00
2705.00
2991.00
2991.00
4326.00
4326.00
6790.00
6790.00
7312.00
7312.00
11946.00
12703.00
—
—
—
—
25CSA92N*
25CSB92N*
25CSD92N*
25CSE92N*
25DSA92N*
25DSB92N*
25DSD92N*
25DSE92N*
25DSF92N*
25ESF92N*
25ESG92N*
25FSF92N*
25FSH92N*
25GSH92N*
25GSJ92N*
25HSJ92N*
25HSK92N*
25ISL92N*
25JTM92N*
25LPU92N*
25MPX92N*
25NHY92N*
25PHZ92N*
1616.00
1616.00
1616.00
1616.00
1702.00
1702.00
1702.00
1702.00
1702.00
1960.00
1960.00
2709.00
2709.00
3864.00
3864.00
4338.00
4338.00
8680.00
9369.00
18833.00
41012.00
54783.00
69459.00
Standard Width Enclosure with Ambient Compensated Bimetal Overload, 3-Phase, 3-Pole
Max Hp
200
Volts
3
7 1⁄2
10
10
15
25
30
40
230
Volts
3
7 1⁄2
10
15
20
30
40
50
Enclosure
460
Volts
5
10
15
25
30
50
75
100
575
Volts
5
10
15
25
30
50
75
100
Contactor
Amp
NEMA Half
Rating Size
Size
18
0
—
27
1
—
40
—
13⁄4
45
2
—
60
—
21⁄2
90
3
—
115
—
31⁄2
135
4
—
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Dual
voltage coils not available in modified starters or
in starter sizes 5–8.
Discount Schedule NEMA
Disc
Amp
Rating
30
30
60
60
100
100
200
200
For
NEMA 1
NEMA 4/4X Stainless
NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Catalog
Number
25CP92W*81
25DP92W*81
25EP92W*81
25FP92W*81
25GP92W*81
25HP92W*81
25IP92W*81
25JP92W*81
Catalog
Number
25JP92W*81
25DP92F*81
25EP92F*81
25FP92F*81
25GP92F*81
25HP92F*81
25IP92F*81
25JP92F*81
Catalog
Number
25CP92B*81
25DP92B*81
25EP92B*81
25FP92B*81
25GP92B*81
25HP92B*81
25IP92B*81
25JP92B*81
List
Price $
1284.00
1370.00
1629.00
2291.00
3325.00
3799.00
7271.00
7673.00
List
Price $
2335.00
2421.00
2680.00
3893.00
6134.00
6608.00
10820.00
11510.00
conduit hubs and conversion instructions, see
page 16-87.
For 60A disconnect, order fusible cat. no.
For 25HP and 200A disconnect, order fusible cat. no.
For 30HP and 200A disconnect, order fusible cat. no.
For 600A disconnect, order fusible cat. no.
NEMA 12
NEMA 3/3R
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List
Price $
11510.00
2664.00
2947.00
4284.00
6747.00
7268.00
11903.00
12662.00
Catalog
Number
25CP92N*81
25DP92N*81
25EP92N*81
25FP92N*81
25GP92N*81
25HP92N*81
25IP92N*81
25JP92N*81
Enclosure is NEMA Type 4 (painted
F coil 100-250V AC 50/60Hz, or DC,
List
Price $
1577.00
1663.00
1922.00
2670.00
3825.00
4299.00
8640.00
9329.00
steel).
H coil 150-500V AC 50/60Hz, or DC
available
F coil 100-250V AC 50/60Hz, or DC
Only
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-29
NEMA & General
Purpose Control
460
Volts
NEMA 4X Fiberglass
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
CONTROL
PRODUCTS
230
Volts
NEMA 4/4X Stainless
General Purpose
16
200
Volts
Disc
Amp
Rating
NEMA 1
Combination Reversing Heavy Duty Starters
MCP Type, Class 26
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (3 required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-122.
Wiring Diagrams see page 16-133.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Standard Width Enclosure with Solid State Overload, 3-Phase, 3-Pole
Max Hp
Enclosure
200 230 460
575 NEMA Half
Volts Volts Volts Volts Size
Size
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
1
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
50
75
100
150
—
—
—
—
1
⁄2
2
3
1
⁄2
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
75
100
125
200
250
300
400
450
1
5
—
1
5
7 1⁄2
10
15
—
15
25
30
—
30
50
75
100
150
200
250
400
500
600
800
900
1
5
—
1
5
10
—
15
—
20
25
30
—
30
50
75
100
200
—
300
400
500
600
800
900
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
5
5
6
6
7
7
8
8
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
—
—
—
—
—
—
—
—
NEMA 1
NEMA 4/4X Stainless
NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Interrupter
Overload Motor
Circuit
Catalog
Amp
ETI Amps Number
Range
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
55–250
55–250
160–540
160–540
420–820
420–820
420–1220
420–1220
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
250
400
400
600
800
1000
1200
1600
26CSB92B*
26CSD92B*
26CSE92B*
26DSB92B*
26DSD92B*
26DSE92B*
26DSF92B*
26ESF92B*
26ESG92B*
26FSF92B*
26FSH92B*
26GSH92B*
26GSJ92B*
26HSJ92B*
26HSK92B*
26ISL92B*
26JTM92B*
26LPT92B*
26LPU92B*
26MPW92B*
26MPX92B*
26NHV92B*
26NHY92B*
26PHZ92B*
26PH192B*
List
Price $
1581.00
1581.00
1581.00
1684.00
1684.00
1684.00
1684.00
1942.00
1942.00
2666.00
2666.00
3493.00
3493.00
3968.00
3968.00
8250.00
8939.00
18065.00
18065.00
38646.00
38646.00
52418.00
52418.00
77979.00
77979.00
Catalog
Number
26CSB92W*
26CSD92W*
26CSE92W*
26DSB92W*
26DSD92W*
26DSE92W*
26DSF92W*
26ESF92W*
26ESG92W*
26FSF92W*
26FSH92W*
26GSH92W*
26GSJ92W*
26HSJ92W*
26HSK92W*
26ISL92W*
26JTM92W*
26LPT92E*
26LPU92E*
26MPW92E*
26MPX92E*
—
—
—
—
List
Price $
2632.00
2632.00
2632.00
2735.00
2735.00
2735.00
2735.00
2994.00
2994.00
4268.00
4268.00
6301.00
6301.00
6776.00
6776.00
11799.00
12488.00
27129.00
27129.00
43182.00
43182.00
—
—
—
—
Catalog
Number
26CSB92F*
26CSD92F*
26CSE92F*
26DSB92F*
26DSD92F*
26DSE92F*
26DSF92F*
26ESF92F*
26ESG92F*
26FSF92F*
26FSH92F*
26GSH92F*
26GSJ92F*
26HSJ92F*
26HSK92F*
26ISL92F*
26JTM92F*
—
—
—
—
—
—
—
—
List
Price $
2896.00
2896.00
2896.00
3009.00
3009.00
3009.00
3009.00
3293.00
3293.00
4696.00
4696.00
6932.00
6932.00
7453.00
7453.00
12979.00
13736.00
—
—
—
—
—
—
—
—
NEMA 7 & 9
NEMA 3 & 4
Div I and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosure
Indoor/Outdoor Use
Catalog
Number
26CSB92H*
26CSD92H*
26CSE92H*
26DSB92H*
26DSD92H*
26DSE92H*
26DSF92H*
26ESF92H*
26ESG92H*
26FSF92H*
26FSH92H*
26GSH92H*
26GSJ92H*
26HSJ92H*
26HSK92H*
26ISL92H*
26JTM92H*
—
—
—
—
—
—
—
—
List
Price $
3241.00
3241.00
3241.00
3358.00
3358.00
3358.00
3358.00
3488.00
3488.00
4970.00
4970.00
5159.00
5159.00
8265.00
8265.00
11804.00
15846.00
—
—
—
—
—
—
—
—
NEMA 12
NEMA 3/3R
NEMA 4 Painted
(thru Sz 4)
Industrial Use,
Weatherproof,
Watertight,Dust-tight
Catalog
Number
26CSB92N*
26CSD92N*
26CSE92N*
26DSB92N*
26DSD92N*
26DSE92N*
26DSF92N*
26ESF92N*
26ESG92N*
26FSF92N*
26FSH92N*
26GSH92N*
26GSJ92N*
26HSJ92N*
26HSK92N*
26ISL92N*
26JTM92N*
26LPT92N*
26LPU92N*
26MPW92N*
26MPX92N*
26NHV92N*
26NHY92N*
26PHZ92N*
26PH192N*
List
Price $
1874.00
1874.00
1874.00
1977.00
1977.00
1977.00
1977.00
2235.00
2235.00
3045.00
3045.00
3993.00
3993.00
4468.00
4468.00
9619.00
10308.00
21321.00
21321.00
41163.00
41163.00
54934.00
54934.00
80305.00
80305.00
Standard Width Enclosure with Ambient Compensated Bimetal Overload, 3-Phase, 3-Pole
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
10
10
15
—
25
30
40
1
⁄2
1
1
3
3
5
1
⁄2
1
1
3
3
7 1⁄2
7 1⁄2 10
—
15
10
—
—
20
15
25
15
30
20
—
—
30
30
50
40
75
50 100
1
3
5
1
3
7 1⁄2
10
15
—
20
25
30
—
30
50
75
100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
18
18
18
27
27
27
27
40
40
45
45
60
60
90
90
115
135
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
16-30
26CP92BA*81
26CP92BB*81
26CP92BC*81
26DP92BA*81
26DP92BB*81
26DP92BD*81
26DP92BE*81
26EP92BF*81
26EP92BG*81
26FP92BH*81
26FP92BJ*81
26GP92BK*81
26GP92BL*81
26HP92BM*81
26HP92BN*81
26IP92BP*81
26JP92BR*81
1542.00
1542.00
1542.00
1645.00
1645.00
1645.00
1645.00
1905.00
1905.00
2628.00
2628.00
3454.00
3454.00
3928.00
3928.00
8210.00
8899.00
26CP92WA*81
26CP92WB*81
26CP92WC*81
26DP92WA*81
26DP92WB*81
26DP92WD*81
26DP92WE*81
26EP92WF*81
26EP92WG*81
26FP92WH*81
26FP92WJ*81
26GP92WK*81
26GP92WL*81
26HP92WM*81
26HP92WN*81
26IP92WP*81
26JP92WR*81
2594.00
2594.00
2594.00
2696.00
2696.00
2696.00
2696.00
2955.00
2955.00
4230.00
4230.00
6263.00
6263.00
6738.00
6738.00
11760.00
12449.00
26CP92FA*81
26CP92FB*81
26CP92FC*81
26DP92FA*81
26DP92FB*81
26DP92FD*81
26DP92FE*81
26EP92FF*81
26EP92FG*81
26FP92FH*81
26FP92FJ*81
26GP92FK*81
26GP92FL*81
26HP92FM*81
26HP92FN*81
26IP92FP*81
26JP92FR*81
Dual
voltage coils not available in modified starters or
in starter sizes 5–8.
For conduit hubs and conversion instructions, see
page 16-87.
Enclosure is NEMA Type 4 (painted steel).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2853.00
2853.00
2853.00
2966.00
2966.00
2966.00
2966.00
3251.00
3251.00
4655.00
4655.00
6891.00
6891.00
7412.00
7412.00
12936.00
13694.00
26CP92HA*81 3204.00 26CP92NA*81
26CP92HB*81 3204.00 26CP92NB*81
26CP92HC*81 3204.00 26CP92NC*81
26DP92HA*81 3320.00 26DP92NA*81
26DP92HB*81 3320.00 26DP92NB*81
26DP92HD*81 3320.00 26DP92ND*81
26DP92HE*81 3320.00 26DP92NE*81
26EP92HF*81
3448.00 26EP92NF*81
26EP92HG*81 3448.00 26EP92NG*81
26FP92HH*81 4931.00 26FP92NH*81
26FP92HJ*81
4931.00 26FP92NJ*81
26GP92HK*81 7752.00 26GP92NK*81
26GP92HL*81 7752.00 26GP92NL*81
26HP92HM*81 8226.00 26HP92NM*81
26HP92HN*81 8226.00 26HP92NN*81
26IP92HP*81 13378.00 26IP92NP*81
26JP92HR*81 15808.00 26JP92NR*81
1835.00
1835.00
1835.00
1938.00
1938.00
1938.00
1938.00
2198.00
2198.00
3007.00
3007.00
3954.00
3954.00
4428.00
4428.00
9580.00
10269.00
F
coil 100-250V AC 50/60Hz, or DC,
H coil 150-500V AC 50/60Hz, or DC
available
F coil 100-250V AC 50/60Hz, or DC
Only
Discount Schedule NEMA
Two Speed Heavy Duty Starters
Features and Benefits
Features
▪
▪
▪
▪
Rugged Industrial Design
Dual Voltage, Dual Frequency Coils
Compact Design
Snap-On Front Removable Auxiliary
Contacts
▪ Electrical and Mechanical Interlocks
▪ Half Sizes — Space and Cost Savings
▪ Industrial Type Disconnect
Operating Handle
▪ Visible Blade Disconnect Thru Size 4
▪ Adjustable Motor Circuit Protector
▪ 100,000 Amp Fault Protection with
MCP or Class R Fuses
▪ Pilot Device Locations identified
on All Enclosures
▪ UL Listed File #E14900
▪ CSA Certified File #LR6535
Applications
Multi-speed magnetic starters
automatically reconnect multi-speed
motor windings for the desired speed in
response to a signal received from push
button stations or other pilot devices.
half the high speed.
Operation
Magnetic starters for multi-speed
applications select the desired speed
in accordance with the pilot control.
The shock to machinery upon the
reduction of speed is greater than when
the speed is increased. Therefore, the
pilot control should be wired so that the
stop button must be depressed before
dropping to a lower speed or time
delays should be used for applications
requiring full automatic operations. The
multi-speed controls are available with
the necessary interlocks or relays to
provide this type of operation.
Acceleration Control provides that
the motor be accelerated automatically
with timers by progressively energizing
the controls from the push button
station from the lowest to highest
speed. To change to a lower speed the
stop button is depressed and then it is
necessary to proceed as if starting from
rest. Acceleration control can be added
from the factory modification section
page 16-98.
Deceleration Control provides that
the motor be decelerated automatically
with a timer when going from high
speed to low speed. The timer allows
the motor to decelerate from high
speed to a lower speed before
automatically restarting the motor in
low speed. Deceleration control can be
added from the factory modification
section page16-98.
These controls may be modified for
compelling or acceleration pilot control.
Selective Control permits the
operator to start the motor at any speed
and to change to a higher speed by
merely pushing a button. To change to
a lower speed it is necessary to first
depress the stop button and to then
press the proper speed button.
Selective control is a function of the
pilot control selected and requires no
starter modifications.
Open Style Two Speed Starter
(ESP100 Overload)
Starters for separate winding
motors consist of a starter unit
for each speed.
Multi-speed motor starters are available
for constant torque, variable torque and
constant horsepower motors.
Constant Torque motors maintain
constant torque at all speeds.
Horsepower varies directly with speed.
This type of motor is applicable to
conveyors, mills and similar
applications.
Internal View of NEMA 1 Enclosure
Sz 2 2S2W starter with CPT
(ESP 100 Overload)
Open Style Two Speed Starter
(Ambient Compensated Overload)
Variable Torque motors produce a
torque characteristic which varies as
the square of the speed. This type of
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-31
NEMA & General
Purpose Control
Separate Windings motors having
separate windings for each speed
provide more varied speed
combinations in that the low speed
need not be one half the high speed.
Constant Horsepower motors
maintain constant horsepower at all
speeds and therefore torque varies
inversely with speed. This type of
motor is applicable where the same
horsepower is required at all speeds.
The higher current required at
low speed requires derating on
starters for constant horsepower
applications. This type of motor is
applicable to metal working machines
such as drills, lathes, mills, bending
machines, punch presses, and power
wrenches.
Compelling Control requires that the
motor always be started at the lower
speed and that the push buttons be
operated in speed sequence to go to
the next higher speed. To change to a
lower speed, the stop button must be
depressed and then the push buttons
operated in speed sequence until the
desired speed is reached. Compelling
control can be added from the factory
modification section page 16-98.
CONTROL
PRODUCTS
Consequent Pole multi-speed motors
having two speeds on a single winding
(consequent pole) require a starter
which reconnects the motor leads to
half the number of effective motor
poles at the high speed point. In this
type of motor, the low speed is one
motor is applicable to fans, blowers
and centrifugal pumps.
16
These starters are available for two
speed motors.
General
Two Speed Heavy Duty Starters
Constant or Variable Torque with Solid Overload, Class 30
2S2W starter
( ESP 100 Overload)
Ordering Information
Coil Table
䊳
Replace the (*) with a letter from
the coil table. Dual voltage coils
are wired on high voltage unless
specified on order.
䊳
Replace the (†) with the letter that
corresponds to the correct low
speed FLA in the FLA table.햳
䊳
Field Modification Kits see page
16-79.
䊳
Factory Modifications see page 16-94.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
䊳
Dimensions see pages 16-104 open
and 16-123 enclosed.
䊳
Wiring Diagrams see page 16-134.
䊳
Replacement Parts see page 16-155.
Selection
Low Speed FLA Table
Letter
J
F
A
D
G
L
C
H
E
Size
0,1
0,1
0,1
0–13/4
1–4
13/4
2–4
21/2–4
3–4
31/2–4
4
FLA
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
†
A
B
D
E
F
G
H
J
K
L
M
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
Open Type햴
CONTROL
PRODUCTS
16
200
Volts
230
460 575
Volts Volts Volts
1
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
3
⁄4
2
3
1 3⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
1 1⁄2
1 1⁄2
5
5
—
—
1
1 ⁄2
1 1⁄2
5
5
10
10
—
—
15
15
—
—
15
15
25
25
30
30
—
—
40
40
50
50
75
75
100
100
NEMA 1
NEMA 4/4X Stainless햲 NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12햲
NEMA 3/3R
NEMA Half
Size
Size
Industrial Use
Overload
Weatherproof
Amp
Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
Range
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
30CSB†32A2V*
30CSD†32A2V*
30CSE†32A2V*
30DSB†32A2V*
30DSD†32A2V*
30DSE†32A2V*
30DSF†32A2V*
30ESF†32A2V*
30ESG†32A2V*
30FSF†32A2V*
30FSH†32A2V*
30GSH†32A2V*
30GSJ†32A2V*
30HSJ†32A2V*
30HSK†32A2V*
30ISL†32A2V*
30JTM†32A2V*
1370.00
1370.00
1370.00
1456.00
1456.00
1456.00
1456.00
1844.00
1844.00
2524.00
2524.00
3145.00
3145.00
3765.00
3765.00
8589.00
9622.00
30CSB†32B2V*
30CSD†32B2V*
30CSE†32B2V*
30DSB†32B2V*
30DSD†32B2V*
30DSE†32B2V*
30DSF†32B2V*
30ESF†32B2V*
30ESG†32B2V*
30FSF†32B2V*
30FSH†32B2V*
30GSH†32B2V*
30GSJ†32B2V*
30HSJ†32B2V*
30HSK†32B2V*
30ISL†32B2V*
30JTM†32B2V*
1405.00
1405.00
1405.00
1508.00
1508.00
1508.00
1508.00
1895.00
1895.00
2680.00
2680.00
3342.00
3342.00
4006.00
4006.00
9536.00
10570.00
30CSB†32W2V* 2231.00 30CSB†32F2V*
30CSD†32W2V* 2231.00 30CSD†32F2V*
30CSE†32W2V*
2231.00 30CSE†32F2V*
30DSB†32W2V* 2317.00 30DSB†32F2V*
30DSD†32W2V* 2317.00 30DSD†32F2V*
30DSE†32W2V* 2317.00 30DSE†32F2V*
30DSF†32W2V*
2317.00 30DSF†32F2V*
30ESF†32W2V*
2705.00 30ESF†32F2V*
30ESG†32W2V* 2705.00 30ESG†32F2V*
30FSF†32W2V*
3679.00 30FSF†32F2V*
30FSH†32W2V*
3679.00 30FSH†32F2V*
30GSH†32W2V* 4600.00 30GSH†32F2V*
30GSJ†32W2V* 4600.00 30GSJ†32F2V*
30HSJ†32W2V* 5487.00 30HSJ†32F2V*
30HSK†32W2V* 5487.00 30HSK†32F2V*
30ISL†32W2V* 12570.00 30ISL†32F2V*
30JTM†32W2V* 13604.00 30JTM†32F2V*
2455.00
2455.00
2455.00
2549.00
2549.00
2549.00
2549.00
2976.00
2976.00
4047.00
4047.00
5061.00
5061.00
6036.00
6036.00
13826.00
14965.00
30CSB†3202V* 1672.00
30CSD†3202V* 1672.00
30CSE†3202V* 1672.00
30DSB†3202V* 1774.00
30DSD†3202V* 1774.00
30DSE†3202V* 1774.00
30DSF†3202V* 1774.00
30ESF†3202V* 2163.00
30ESG†3202V* 2163.00
30FSF†3202V*
3059.00
30FSH†3202V* 3059.00
30GSH†3202V* 3963.00
30GSJ†3202V* 3963.00
30HSJ†3202V* 4868.00
30HSK†3202V* 4868.00
30ISL†3202V* 11243.00
30JTM†3202V* 12277.00
NEMA & General
Purpose Control
Two Separate Windings, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
Open Type햴
NEMA 1
NEMA 4/4X Stainless햲 NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
30CSB†32W1V*
30CSD†32W1V*
30CSE†32W1V*
30DSB†32W1V*
30DSD†32W1V*
30DSE†32W1V*
30DSF†32W1V*
30ESF†32W1V*
30ESG†32W1V*
30FSF†32W1V*
30FSH†32W1V*
30GSH†32W1V*
30GSJ†32W1V*
30HSJ†32W1V*
30HSK†32W1V*
30ISL†32W1V*
30JTM†32W1V*
30CSB†32F1V*
30CSD†32F1V*
30CSE†32F1V*
30DSB†32F1V*
30DSD†32F1V*
30DSE†32F1V*
30DSF†32F1V*
30ESF†32F1V*
30ESG†32F1V*
30FSF†32F1V*
30FSH†32F1V*
30GSH†32F1V*
30GSJ†32F1V*
30HSJ†32F1V*
30HSK†32F1V*
30ISL†32F1V*
30JTM†32F1V*
NEMA 12햲
NEMA 3/3R
200
Volts
230
460 575
Volts Volts Volts
NEMA Half
Size
Size
Industrial Use
Overload
Weatherproof
Amp
Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
Range
1
3
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
⁄4
2
3
1 3⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
1 1⁄2
5
—
1 1⁄2
5
10
—
15
—
15
25
30
30
40
50
75
100
1 1⁄2
5
—
1 1⁄2
5
10
—
15
—
15
25
30
30
40
50
75
100
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
30CSB†32A1V*
30CSD†32A1V*
30CSE†32A1V*
30DSB†32A1V*
30DSD†32A1V*
30DSE†32A1V*
30DSF†32A1V*
30ESF†32A1V*
30ESG†32A1V*
30FSF†32A1V*
30FSH†32A1V*
30GSH†32A1V*
30GSJ†32A1V*
30HSJ†32A1V*
30HSK†32A1V*
30ISL†32A1V*
30JTM†32A1V*
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-32
991.00
991.00
991.00
1094.00
1094.00
1094.00
1094.00
1353.00
1353.00
1852.00
1852.00
2343.00
2343.00
2835.00
2835.00
6298.00
6987.00
30CSB†32B1V*
30CSD†32B1V*
30CSE†32B1V*
30DSB†32B1V*
30DSD†32B1V*
30DSE†32B1V*
30DSF†32B1V*
30ESF†32B1V*
30ESG†32B1V*
30FSF†32B1V*
30FSH†32B1V*
30GSH†32B1V*
30GSJ†32B1V*
30HSJ†32B1V*
30HSK†32B1V*
30ISL†32B1V*
30JTM†32B1V*
1026.00
1026.00
1026.00
1147.00
1147.00
1147.00
1147.00
1405.00
1405.00
1991.00
1991.00
2533.00
2533.00
3075.00
3075.00
6745.00
7435.00
햲 For conduit hubs and conversion instructions, see
page 16-87.
햳 If motor FLA are unknown, select overload on the
1852.00
1852.00
1852.00
1956.00
1956.00
1956.00
1956.00
2214.00
2214.00
3007.00
3007.00
3782.00
3782.00
4557.00
4557.00
9778.00
10466.00
2037.00
2037.00
2037.00
2151.00
2151.00
2151.00
2151.00
2436.00
2436.00
3308.00
3308.00
4161.00
4161.00
5013.00
5013.00
10756.00
11513.00
30CSB†3201V*
30CSD†3201V*
30CSE†3201V*
30DSB†3201V*
30DSD†3201V*
30DSE†3201V*
30DSF†3201V*
30ESF†3201V*
30ESG†3201V*
30FSF†3201V*
30FSH†3201V*
30GSH†3201V*
30GSJ†3201V*
30HSJ†3201V*
30HSK†3201V*
30ISL†3201V*
30JTM†3201V*
1293.00
1293.00
1293.00
1412.00
1412.00
1412.00
1412.00
1672.00
1672.00
2370.00
2370.00
3153.00
3153.00
3911.00
3911.00
8451.00
9140.00
햴 Auxiliary
contacts
30C-30E 4th pole built-in
30F-30J 2 NO & 2 NC
basis that low speed FLA will be no greater than 50%
of high speed FLA.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Two Speed Heavy Duty Starters
Constant HP with Solid State Overload, Class 30
2S2W starter
( ESP 100 Overload)
Selection
Ordering Information
Coil Table
䊳
Replace the (*) with a letter from
the coil table. Dual voltage coils
are wired on high voltage unless
specified on order.
䊳
Replace the (†) with the letter that
corresponds to the correct FLA in
High/Low Speed FLA Table.햳
䊳
Field Modification Kits see page
16-79.
䊳
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Factory Modifications see page 16-94.
䊳
Dimensions see pages 16-104
open and 16-123 enclosed.
䊳
Wiring Diagrams see page 16-134.
䊳
Replacement Parts see page 16-155.
햳
High/Low Speed FLA Table
Size
0,1
0,1
0,1
0–13/4
1–4
13/4
2–4
21/2–4
3–4
31/2–4
4
Letter
J
F
A
D
G
L
C
H
E
FLA
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
†
A
B
D
E
F
G
H
J
K
L
M
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
Open Type햴
200
Volts
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
30CS††32W2H*
30DS††32W2H*
30ES††32W2H*
30FS††32W2H*
30GS††32W2H*
30HS††32W2H*
30IS††32W2H*
30JT††32W2H*
30CS††32F2H*
30DS††32F2H*
30ES††32F2H*
30FS††32F2H*
30GS††32F2H*
30HS††32F2H*
30IS††32F2H*
30JT††32F2H*
NEMA 12햲
NEMA 3/3R
NEMA Half
Size
Size
Industrial Use
Overload
Weatherproof
Amp
Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
Range
0
1
—
2
—
3
—
4
—
—
—
—
—
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CS††32A2H*
30DS††32A2H*
30ES††32A2H*
30FS††32A2H*
30GS††32A2H*
30HS††32A2H*
30IS††32A2H*
30JT††32A2H*
1370.00
1456.00
1844.00
2524.00
3145.00
3765.00
8589.00
9622.00
30CS††32B2H* 1405.00
30DS††32B2H* 1508.00
30ES††32B2H* 1895.00
30FS††32B2H* 2680.00
30GS††32B2H* 3342.00
30HS††32B2H* 4006.00
30IS††32B2H*
9536.00
30JT††32B2H* 10570.00
2231.00
2317.00
2705.00
3679.00
4600.00
5487.00
12570.00
13604.00
2455.00
2549.00
2976.00
4047.00
5061.00
6036.00
13826.00
14965.00
30CS††3202H* 1672.00
30DS††3202H* 1774.00
30ES††3202H* 2163.00
30FS††3202H* 3059.00
30GS††3202H* 3963.00
30HS††3202H* 4868.00
30IS††3202H* 11243.00
30JT††3202H* 12277.00
Two Separate Windings, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
Open Type햴
200
Volts
NEMA 4/4X Stainless햲 NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
30CS††32W1H* 1852.00
30DS††32W1H* 1956.00
30ES††32W1H* 2214.00
30FS††32W1H*
3007.00
30GS††32W1H* 3782.00
30HS††32W1H* 4557.00
30IS††32W1H*
9778.00
30JT††32W1H* 10466.00
30CS††32F1H*
30DS††32F1H*
30ES††32F1H*
30FS††32F1H*
30GS††32F1H*
30HS††32F1H*
30IS††32F1H*
30JT††32F1H*
NEMA 12햲
NEMA 3/3R
230
460 575
Volts Volts Volts
NEMA Half
Size
Size
Industrial Use
Overload
Weatherproof
Amp
Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
Range
2
5
7 1⁄2
10
15
25
30
40
0
1
—
2
—
3
—
4
—
—
—
—
—
—
—
—
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CS††32A1H*
30DS††32A1H*
30ES††32A1H*
30FS††32A1H*
30GS††32A1H*
30HS††32A1H*
30IS††32A1H*
30JT††32A1H*
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
햲 For conduit hubs and conversion instructions, see
991.00
1094.00
1353.00
1852.00
2343.00
2835.00
6298.00
6987.00
30CS††32B1H*
30DS††32B1H*
30ES††32B1H*
30FS††32B1H*
30GS††32B1H*
30HS††32B1H*
30IS††32B1H*
30JT††32B1H*
1026.00
1147.00
1405.00
1991.00
2533.00
3075.00
6745.00
7435.00
햳 First (†) for high speed, second (†) for low speed. Use
motor nameplate information to select FLA. If motor
FLA are unknown, select overload on the basis that
low speed FLA will be no greater than 50% of high
speed FLA.
2037.00
2151.00
2436.00
3308.00
4161.00
5013.00
10756.00
11513.00
30CS††3201H*
30DS††3201H*
30ES††3201H*
30FS††3201H*
30GS††3201H*
30HS††3201H*
30IS††3201H*
30JT††3201H*
1293.00
1412.00
1672.00
2370.00
3153.00
3938.00
8451.00
9140.00
햴 Auxiliary
contacts
30C-30E 4th pole built-in
30F-30J 2 NO & 2 NC
page 16-87.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-33
NEMA & General
Purpose Control
2
5
7 1⁄2
7 1⁄2
10
20
25
30
NEMA 1
CONTROL
PRODUCTS
2
5
7 1⁄2
10
15
25
30
40
NEMA 4/4X Stainless햲 NEMA 4X Fiberglass
General Purpose
16
2
5
7 1⁄2
7 1⁄2
10
20
25
30
230
460 575
Volts Volts Volts
NEMA 1
Two Speed Heavy Duty Starters
Constant or Variable Torque with Ambient Compensated Bimetal Overload, Class 30Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148 (6 required)���
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-104 open and 16-123 enclosed.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
2S2W starter
(Amb. Comp. Bimetal OL)
One Winding Consequent Pole, 3 Phase (Constant or Variable Torque)
Max Hp
Enclosure
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Open Type
200
Volts
230
Volts
460
Volts
NEMA 1
NEMA 4/4X Stainless
NEMA 4X Fiberglass
NEMA 12
General Purpose
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3/3R
ContCorrosion Resistant
Corrosion Resistant
Industrial Use
actor
304 Stainless Steel
Weatherproof
575 Amp NEMA Half
Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
3
7 1⁄2
10
10
15
25
30
40
3
7 1⁄2
10
15
20
30
40
50
5
10
15
25
30
50
75
100
5
10
15
25
30
50
75
100
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CP32A2V*81
30DP32A2V*81
30EP32A2V*81
30FP32A2V*81
30GP32A2V*81
30HP32A2V*81
30IP32A2V*81
30JG32A2V*81
1293.00
1379.00
1766.00
2446.00
3067.00
3687.00
8512.00
9546.00
30CP32B2V*81 1326.00
30DP32B2V*81 1430.00
30EP32B2V*81
1819.00
30FP32B2V*81
2602.00
30GP32B2V*81 3266.00
30HP32B2V*81 3928.00
30IP32B2V*81
9459.00
30JG32B2V*81 11211.00
30CP32W2V*81 2154.00
30DP32W2V*81 2240.00
30EP32W2V*81 2628.00
30FP32W2V*81
3600.00
30GP32W2V*81 4523.00
30HP32W2V*81 5410.00
30IP32W2V*81 12492.00
30JG32W2V*81 13525.00
30CP32F2V*81
30DP32F2V*81
30EP32F2V*81
30FP32F2V*81
30GP32F2V*81
30HP32F2V*81
30IP32F2V*81
30JG32F2V*81
2370.00
2464.00
2891.00
3961.00
4976.00
5951.00
13742.00
14878.00
30CP3202V*81 1594.00
30DP3202V*81 1698.00
30EP3202V*81 2084.00
30FP3202V*81 2981.00
30GP3202V*81 3886.00
30HP3202V*81 4789.00
30IP3202V*81 11165.00
30JG3202V*81 12199.00
Two Separate Windings, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
200
Volts
230
Volts
Open Type
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
NEMA 12
General Purpose
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3/3R
ContCorrosion Resistant
Corrosion Resistant
Industrial Use
actor
304 Stainless Steel
Weatherproof
460 575 Amp NEMA Half
Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
3
7 1⁄2
10
10
15
25
30
40
3
7 1⁄2
10
15
20
30
40
50
5
10
15
25
30
50
75
100
5
10
15
25
30
50
75
100
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CP32A1V*81
30DP32A1V*81
30EP32A1V*81
30FP32A1V*81
30GP32A1V*81
30HP32A1V*81
30IP32A1V*81
30JG32A1V*81
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-34
914.00
1016.00
1275.00
1774.00
2266.00
2756.00
6220.00
6910.00
30CP32B1V*81
30DP32B1V*81
30EP32B1V*81
30FP32B1V*81
30GP32B1V*81
30HP32B1V*81
30IP32B1V*81
30JG32B1V*81
947.00
1068.00
1326.00
1912.00
2456.00
2998.00
6669.00
7357.00
30CP32W1V*81 1774.00
30DP32W1V*81 1877.00
30EP32W1V*81 2137.00
30FP32W1V*81 2928.00
30GP32W1V*81 3704.00
30HP32W1V*81 4479.00
30IP32W1V*81
9701.00
30JG32W1V*81 10390.00
For conduit hubs and conversion instructions,
see page 16-87.
If motor FLA are unknown, select heater elements on
30CP32F1V*81
30DP32F1V*81
30EP32F1V*81
30FP32F1V*81
30GP32F1V*81
30HP32F1V*81
30IP32F1V*81
30JG32F1V*81
1952.00
2065.00
2352.00
3221.00
4076.00
4928.00
10671.00
11429.00
30CP3201V*81
30DP3201V*81
30EP3201V*81
30FP3201V*81
30GP3201V*81
30HP3201V*81
30IP3201V*81
30JG3201V*81
1215.00
1336.00
1594.00
2291.00
3075.00
3859.00
8374.00
9064.00
Auxiliary
contacts
30C-30E 4th pole built-in
30F-30J 2 NO & 2 NC
the basis that low speed FLA will be no greater than
50% of high speed FLA.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Two Speed Heavy Duty Starters
Constant HP with Ambient Compensated Bimetal Overload, Class 30
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148 (6 required)���
.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-104 open and 16-123 enclosed.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
2S2W starter
(Amb. Comp. Bimetal OL)
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
200
Volts
Open Type
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
NEMA 12
General Purpose
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3/3R
ContCorrosion Resistant
Corrosion Resistant
Industrial Use
actor
304 Stainless Steel
Weatherproof
230
460 575 Amp NEMA Half
Volts Volts Volts Rating Size
Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
2
5
7 1⁄2
7 1⁄2
10
20
25
30
2
5
7 1⁄2
10
15
25
30
40
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CP32A2H*81
30DP32A2H*81
30EP32A2H*81
30FP32A2H*81
30GP32A2H*81
30HP32A2H*81
30IP32A2H*81
30JG32A2H*81
1293.00
1379.00
1766.00
2446.00
3067.00
3687.00
8512.00
9546.00
30CP32B2H*81 1326.00
30DP32B2H*81 1430.00
30EP32B2H*81 1819.00
30FP32B2H*81 2602.00
30GP32B2H*81 3266.00
30HP32B2H*81 3928.00
30IP32B2H*81
9459.00
30JG32B2H*81 10493.00
30CP32W2H*81 2154.00 30CP32F2H*81 2370.00 30CP3202H*81 1594.00
30DP32W2H*81 2240.00 30DP32F2H*81 2464.00 30DP3202H*81 1698.00
30EP32W2H*81 2628.00 30EP32F2H*81 2891.00 30EP3202H*81 2084.00
30FP32W2H*81 3600.00 30FP32F2H*81
3961.00 30FP3202H*81 2981.00
30GP32W2H*81 4523.00 30GP32F2H*81 4976.00 30GP3202H*81 3886.00
30HP32W2H*81 5410.00 30HP32F2H*81 5951.00 30HP3202H*81 4789.00
30IP32W2H*81 12492.00 30IP32F2H*81 13742.00 30IP3202H*81 11165.00
30JG32W2H*81 13525.00 30JG32F2H*81 14878.00 30JG3202H*81 12199.00
16
Two Separate Windings, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
NEMA 12
General Purpose
Watertight, Dust-tight
Watertight, Dust-tight
NEMA 3/3R
ContCorrosion Resistant
Corrosion Resistant
Industrial Use
actor
304 Stainless Steel
Weatherproof
200 230 460 575 Amp NEMA Half
Volts Volts Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $
2
5
7 1⁄2
10
15
25
30
40
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30CP32A1H*81
30DP32A1H*81
30EP32A1H*81
30FP32A1H*81
30GP32A1H*81
30HP32A1H*81
30IP32A1H*81
30JG32A1H*81
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
914.00
1016.00
1275.00
1774.00
2266.00
2756.00
6220.00
6910.00
30CP32B1H*81
30DP32B1H*81
30EP32B1H*81
30FP32B1H*81
30GP32B1H*81
30HP32B1H*81
30IP32B1H*81
30JG32B1H*81
947.00
1068.00
1068.00
1912.00
2456.00
2998.00
6669.00
7357.00
30CP32W1H*81 1774.00
30DP32W1H*81 1877.00
30EP32W1H*81 2137.00
30FP32W1H*81
2928.00
30GP32W1H*81 3704.00
30HP32W1H*81 4479.00
30IP32W1H*81
9701.00
30JG32W1H*81 10390.00
If motor FLA are unknown, select heater element on
the basis that low speed FLA will be no greater than
50% of high speed FLA.
30CP32F1H*81 1952.00 30CP3201H*81
30DP32F1H*81 2065.00 30DP3201H*81
30EP32F1H*81 2352.00 30EP3201H*81
30FP32F1H*81 3221.00 30FP3201H*81
30GP32F1H*81 4076.00 30GP3201H*81
30HP32F1H*81 4928.00 30HP3201H*81
30IP32F1H*81 10671.00 30IP3201H*81
30JG32F1H*81 11429.00 30JG3201H*81
1215.00
1336.00
1594.00
2291.00
3075.00
3859.00
8374.00
9064.00
Auxiliary
contacts
30C-30E 4th pole built-in
30F-30J 2 NO & 2 NC
For conduit hubs and conversion instructions,
see page 16-87.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-35
NEMA & General
Purpose Control
2
5
7 1⁄2
7 1⁄2
10
20
25
30
CONTROL
PRODUCTS
Open Type
Combination Two Speed Heavy Duty Starters
Non-Fusible, Constant or Variable Torque with Solid Overload, Class 32
Ordering Information
Coil Table
䊳
60Hz Voltage
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Replace the (*) with a letter from
the coil table. Dual voltage coils
are wired on high voltage unless
specified on order.
Replace the (†) with the letter that
corresponds to the correct low
speed FLA in the FLA table.���
Fuse clips see page 16-95.
Field Modification Kits see page
16-79.
Factory Modifications see page
16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
Selection
Low Speed FLA Table
Letter
24 Separate Control
120 Separate Control
110–120/220–240���
200–208
220–240
277
220–240/440–480���
440–480
575–600
J
F
A
D
G
L
C
H
E
Size
FLA
†
0,1
0,1
0,1
0–13/4
1–4
13/4
2–4
21/2–4
3–4
31/2–4
4
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
A
B
D
E
F
G
H
J
K
L
M
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
200
230
Volts Volts
CONTROL
PRODUCTS
16
1
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
20
30
40
3
⁄4
2
3
1 3⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
25
40
50
460
Volts
575
Volts
1 1⁄2
5
—
1 1⁄2
5
10
—
15
—
15
25
30
—
40
50
75
100
2
5
—
2
5
10
—
15
—
15
25
30
—
40
50
75
100
NEMA
Size
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
32CSB†92W2V2*
32CSD†92W2V2*
32CSE†92W2V2*
32DSB†92W2V2*
32DSB†92W2V2*
32DSE†92W2V2*
32DSF†92W2V2*
32ESF†92W2V2*
32ESG†92W2V2*
32FSF†92W2V2*
32FSH†92W2V2*
32GSH†92W2V2*
32GSJ†92W2V2*
32HSJ†92W2V2*
32HSK†92W2V2*
32ISL†92W2V2*
32JTM†92W2V2*
32CSB†92F2V2*
32CSD†92F2V2*
32CSE†92F2V2*
32DSB†92F2V2*
32DSB†92F2V2*
32DSE†92F2V2*
32DSF†92F2V2*
32ESF†92F2V2*
32ESG†92F2V2*
32FSF†92F2V2*
32FSH†92F2V2*
32GSH†92F2V2*
32GSJ†92F2V2*
32HSJ†92F2V2*
32HSK†92F2V2*
32ISL†92F2V2*
32JTM†92F2V2*
Overload Disc
Half Amp
Amp
Size Range
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
30
30
30
30
30
30
60
60
60
60
60
100
100
100
100
200
200
32CSB†92B2V2*
32CSD†92B2V2*
32CSE†92B2V2*
32DSB†92B2V2*
32DSD†92B2V2*
32DSE†92B2V2*
32DSF†92B2V2*
32ESF†92B2V2*
32ESG†92B2V2*
32FSF†92B2V2*
32FSH†92B2V2*
32GSH†92B2V2*
32GSJ†92B2V2*
32HSJ†92B2V2*
32HSK†92B2V2*
32ISL†92B2V2*
32JTM†92B2V2*
2214.00
2214.00
2214.00
2317.00
2317.00
2317.00
2317.00
2928.00
2928.00
3713.00
3713.00
4652.00
4652.00
5315.00
5315.00
11345.00
12381.00
3541.00
3541.00
3541.00
3645.00
3645.00
3645.00
3645.00
4256.00
4256.00
5368.00
5368.00
6306.00
6306.00
8141.00
8141.00
15791.00
16825.00
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
List Price $
3894.00
3894.00
3894.00
4009.00
4009.00
4009.00
4009.00
4682.00
4682.00
5904.00
5904.00
6936.00
6936.00
8955.00
8955.00
17371.00
18508.00
2498.00
2498.00
2498.00
2602.00
2602.00
2602.00
2602.00
3214.00
3214.00
4161.00
4161.00
5100.00
5100.00
6298.00
6298.00
14086.00
15120.00
32CSB†92N2V2*
32CSD†92N2V2*
32CSE†92N2V2*
32DSB†92N2V2*
32DSD†92N2V2*
32DSE†92N2V2*
32DSF†92N2V2*
32ESF†92N2V2*
32ESG†92N2V2*
32FSF†92N2V2*
32FSH†92N2V2*
32GSH†92N2V2*
32GSJ†92N2V2*
32HSJ†92N2V2*
32HSK†92N2V2*
32ISL†92N2V2*
32JTM†92N2V2*
Two Separate Windings, 3-Phase (Constant or Variable Torque)
NEMA & General
Purpose Control
Max Hp
Enclosure
200
230
Volts Volts
1
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
20
30
40
3
⁄4
2
3
1 3⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
25
40
50
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
460
Volts
575
Volts
NEMA
Size
Overload Disc
Half Amp
Amp
Size Range
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
1 1⁄2
5
—
1 1⁄2
5
10
—
15
—
15
25
30
—
40
50
75
100
2
5
—
2
5
10
—
15
—
15
25
30
—
40
50
75
100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-36
NEMA 1
30
30
30
30
30
30
60
60
60
60
60
100
100
100
100
200
200
32CSB†92B1V2*
32CSD†92B1V2*
32CSE†92B1V2*
32DSB†92B1V2*
32DSD†92B1V2*
32DSE†92B1V2*
32DSF†92B1V2*
32ESF†92B1V2*
32ESG†92B1V2*
32FSF†92B1V2*
32FSH†92B1V2*
32GSH†92B1V2*
32GSJ†92B1V2*
32HSJ†92B1V2*
32HSK†92B1V2*
32ISL†92B1V2*
32JTM†92B1V2*
1835.00
1835.00
1835.00
1956.00
1956.00
1956.00
1956.00
2438.00
2438.00
3024.00
3024.00
3842.00
3842.00
4388.00
4388.00
8554.00
9243.00
32CSB†92W1V2*
32CSD†92W1V2*
32CSE†92W1V2*
32DSB†92W1V2*
32DSD†92W1V2*
32DSE†92W1V2*
32DSF†92W1V2*
32ESF†92W1V2*
32ESG†92W1V2*
32FSF†92W1V2*
32FSH†92W1V2*
32GSH†92W1V2*
32GSJ†92W1V2*
32HSJ†92W1V2*
32HSK†92W1V2*
32ISL†92W1V2*
32JTM†92W1V2*
3162.00
3162.00
3162.00
3282.00
3282.00
3282.00
3282.00
3765.00
3765.00
4678.00
4678.00
5496.00
5496.00
7210.00
7210.00
13000.00
13690.00
Dual
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
32CSB†92F1V2*
32CSD†92F1V2*
32CSE†92F1V2*
32DSB†92F1V2*
32DSD†92F1V2*
32DSE†92F1V2*
32DSF†92F1V2*
32ESF†92F1V2*
32ESG†92F1V2*
32FSF†92F1V2*
32FSH†92F1V2*
32GSH†92F1V2*
32GSJ†92F1V2*
32HSJ†92F1V2*
32HSK†92F1V2*
32ISL†92F1V2*
32JTM†92F1V2*
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
List Price $
3478.00
3478.00
3478.00
3611.00
3611.00
3611.00
3611.00
4142.00
4142.00
5146.00
5146.00
6046.00
6046.00
7932.00
7932.00
14300.00
15059.00
2119.00
2119.00
2119.00
2240.00
2240.00
2240.00
2240.00
2722.00
2722.00
3472.00
3472.00
4290.00
4290.00
5368.00
5368.00
11294.00
11984.00
32CSB†92N1V2*
32CSD†92N1V2*
32CSE†92N1V2*
32DSB†92N1V2*
32DSD†92N1V2*
32DSE†92N1V2*
32DSF†92N1V2*
32ESF†92N1V2*
32ESG†92N1V2*
32FSF†92N1V2*
32FSH†92N1V2*
32GSH†92N1V2*
32GSJ†92N1V2*
32HSJ†92N1V2*
32HSK†92N1V2*
32ISL†92N1V2*
32JTM†92N1V2*
If motor FLA are unknown, select overload on the
basis that low speed FLA will be no greater than 50%
of high speed FLA.
Discount Schedule NEMA
Combination Two Speed Heavy Duty Starters
Non-Fusible, Constant Horsepower with Solid State Overload, Class 32
High/Low Speed FLA Table
Coil Table
Ordering Information
Replace the (*) with a letter from
the coil table. Dual voltage coils are
wired on high voltage unless
specified on order.
䊳 Replace the (†) with the letter that
corresponds to the correct FLA in the
High/Low Speed FLA Table.
䊳 Fuse clips see page 16-95.
䊳 Field Modification Kits see page 16-79.
䊳 Factory Modifications see page 16-94.
䊳 Dimensions see page 16-124.
䊳 Wiring Diagrams see page 16-134.
䊳 Replacement Parts see page 16-155.
䊳
Selection
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
J
F
A
D
G
L
C
H
E
Size
0,1
0,1
0,1
0–13⁄4
1–4
13⁄4
2–4
21⁄2–4
3–4
31⁄2–4
4
FLA
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
†
A
B
D
E
F
G
H
J
K
L
M
For other voltages and
frequencies see Factory
Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
200
230
Volts Volts
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
NEMA
Size
Overload Disc
Half Amp
Amp
Size Range
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
3894.00
4679.00
4679.00
5904.00
6936.00
8955.00
17371.00
18508.00
2498.00
2602.00
3214.00
4161.00
5100.00
6298.00
14086.00
15120.00
—
—
—
—
—
—
—
—
30
30
60
60
100
100
200
200
32CS††92B2H2* 2214.00 32CS††92W2H2* 3541.00 32CS††92F2H2*
32DS††92B2H2* 2317.00 32DS††92W2H2* 3645.00 32DS††92F2H2*
32ES††92B2H2* 2928.00 32ES††92W2H2* 4256.00 32ES††92F2H2*
32FS††92B2H2* 3713.00 32FS††92W2H2* 5368.00 32FS††92F2H2*
32GS††92B2H2* 4652.00 32GS††92W2H2* 6306.00 32GS††92F2H2*
32HS††92B2H2* 5315.00 32HS††92W2H2* 8141.00 32HS††92F2H2*
32IS††92B2H2* 11345.00 32IS††92W2H2* 15791.00 32IS††92F2H2*
32JT††92B2H2* 12381.00 32JT††92W2H2* 16825.00 32JT††92F2H2*
32CS††92N2H2*
32DS††92N2H2*
32ES††92N2H2*
32FS††92N2H2*
32GS††92N2H2*
32HS††92N2H2*
32IS††92N2H2*
32JT††92N2H2*
Two Separate Windings, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
2
5
7 1⁄2
10
15
25
30
40
460
Volts
575
Volts
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
NEMA
Size
Overload Disc
Half Amp
Amp
Size Range
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
3478.00
3611.00
4142.00
5146.00
6046.00
7932.00
14300.00
15059.00
2119.00
2240.00
2722.00
3472.00
4290.00
5368.00
11294.00
11984.00
—
—
—
—
—
—
—
—
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
30
30
60
60
100
100
200
200
32CS††92B1H2*
32DS††92B1H2*
32ES††92B1H2*
32FS††92B1H2*
32GS††92B1H2*
32HS††92B1H2*
32IS††92B1H2*
32JT††92B1H2*
Dual
1835.00
1956.00
2438.00
3024.00
3842.00
4388.00
8554.00
9243.00
32CS††92W1H2*
32DS††92W1H2*
32ES††92W1H2*
32FS††92W1H2*
32GS††92W1H2*
32HS††92W1H2*
32IS††92W1H2*
32JT††92W1H2*
3162.00
3282.00
3765.00
4678.00
5496.00
7210.00
13000.00
13690.00
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
32CS††92F1H2*
32DS††92F1H2*
32ES††92F1H2*
32FS††92F1H2*
32GS††92F1H2*
32HS††92F1H2*
32IS††92F1H2*
32JT††92F1H2*
32CS††92N1H2*
32DS††92N1H2*
32ES††92N1H2*
32FS††92N1H2*
32GS††92N1H2*
32HS††92N1H2*
32IS††92N1H2*
32JT††92N1H2*
First
† for high speed, second † for low speed. Use
motor nameplate information to select FLA. If motor
FLA are unknown, select overload on the basis that
low speed FLA will be no greater than 50% of high
speed FLA.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-37
NEMA & General
Purpose Control
200
230
Volts Volts
2
5
7 1⁄2
7 1⁄2
10
20
25
30
CONTROL
PRODUCTS
2
5
7 1⁄2
10
15
25
30
40
575
Volts
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
16
2
5
7 1⁄2
7 1⁄2
10
20
25
30
460
Volts
NEMA 1
Combination Two Speed Heavy Duty Starters
Non-Fusible, Constant or Variable Torque with Ambient Compensated Bimetal Overload, Class 32 Selection
Ordering Information
Coil Table
䊳
60Hz Voltage
Replace the (*) with a letter from the coil
table. Dual voltage coils are wired on high
voltage unless specified on order.
䊳
Heater elements see page 16-148. (6 required)
䊳
Fuse clips see page 16-95.
䊳
Field Modification Kits see page 16-79.
䊳
Factory Modifications see page 16-94.
䊳
Dimensions see page 16-124.
䊳
Wiring Diagrams see page 16-134.
䊳
Replacement Parts see page 16-155.
Letter
24 Separate Control
120 Separate Control
110–120/220–240���
J
F
A
200–208
D
220–240
G
277
L
���
220–240/440–480
C
440–480
H
575–600
E
For other voltages and frequencies, see Factory
Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
CONTROL
PRODUCTS
16
200
230
Volts Volts
3
7 1⁄2
10
10
15
20
30
40
3
7 1⁄2
10
15
20
25
40
50
575
Volts
5
10
15
25
30
50
75
100
5
10
15
25
30
50
75
100
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Disc
Amp
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
30
30
60
60
100
100
200
200
32CP92B2V2*81 2137.00 32CP92W2V2*81 3463.00 32CP92F2V2*81
32DP92B2V2*81 2240.00 32DP92W2V2*81 3566.00 32DP92F2V2*81
32EP92B2V2*81 2852.00 32EP92W2V2*81 4178.00 32EP92F2V2*81
32FP92B2V2*81 3635.00 32FP92W2V2*81 5289.00 32FP92F2V2*81
32GP92B2V2*81 4575.00 32GP92W2V2*81 6229.00 32GP92F2V2*81
32HP92B2V2*81 5237.00 32HP92W2V2*81 8064.00 32HP92F2V2*81
32IP92B2V2*81 11269.00 32IP92W2V2*81 15713.00 32IP92F2V2*81
32JP92B2V2*81 12302.00 32JP92W2V2*81 16749.00 32JP92F2V2*81
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
3809.00
3923.00
4596.00
5818.00
6851.00
8871.00
17286.00
18423.00
List Price $
32CP92N2V2*81
32DP92N2V2*81
32EP92N2V2*81
32FP92N2V2*81
32GP92N2V2*81
32HP92N2V2*81
32IP92N2V2*81
32JP92N2V2*81
2421.00
2524.00
3135.00
4083.00
5022.00
6220.00
14008.00
15041.00
Two Separate Windings, 3-Phase (Constant or Variable Torque)
Max Hp
200
230
Volts Volts
NEMA & General
Purpose Control
460
Volts
Contactor
Amp
NEMA Half
Rating Size
Size
NEMA 1
3
7 1⁄2
10
10
15
20
30
40
3
7 1⁄2
10
15
20
25
40
50
Enclosure
460
Volts
5
10
15
25
30
50
75
100
575
Volts
5
10
15
25
30
50
75
100
Contactor
Amp
NEMA Half
Rating Size Size
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-38
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
32CP92W1V2*81
32DP92W1V2*81
32EP92W1V2*81
32FP92W1V2*81
32GP92W1V2*81
32HP92W1V2*81
32IP92W1V2*81
32JP92W1V2*81
32CP92F1V2*81
32DP92F1V2*81
32EP92F1V2*81
32FP92F1V2*81
32GP92F1V2*81
32HP92F1V2*81
32IP92F1V2*81
32JP92F1V2*81
Disc
Amp
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
30
30
60
60
100
100
200
200
32CP92B1V2*81
32DP92B1V2*81
32EP92B1V2*81
32FP92B1V2*81
32GP92B1V2*81
32HP92B1V2*81
32IP92B1V2*81
32JP92B1V2*81
1758.00
1877.00
2360.00
2946.00
3765.00
4307.00
8478.00
9166.00
3084.00
3205.00
3687.00
4600.00
5419.00
7134.00
12922.00
13611.00
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
List Price $
3393.00
3526.00
4056.00
5061.00
5962.00
7847.00
14215.00
14973.00
2042.00
2163.00
2645.00
3394.00
4213.00
5289.00
11217.00
11906.00
32CP92N1V2*81
32DP92N1V2*81
32EP92N1V2*81
32FP92N1V2*81
32GP92N1V2*81
32HP92N1V2*81
32IP92N1V2*81
32JP92N1V2*81
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see
page 16-87.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Combination Two Speed Heavy Duty Starters
Non-Fusible, Constant Horsepower with Ambient Compensated Bimetal Overload, Class 32 Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (6 Required)
Fuse clips see page 16-95.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
200
230
Volts Volts
2
5
7 1⁄2
7 1⁄2
10
20
25
30
2
5
7 1⁄2
10
15
25
30
40
460
Volts
3
7 1⁄2
10
20
25
40
50
75
575
Volts
3
7 1⁄2
10
20
25
40
50
75
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Contactor
Disc
Amp
NEMA Half Amp
Rating
Size
Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
30
30
60
60
100
100
200
200
32CP92B2H2*81 2137.00 32CP92W2H2*81 3463.00
32DP92B2H2*81 2240.00 32DP92W2H2*81 3566.00
32EP92B2H2*81 2852.00 32EP92W2H2*81 4178.00
32FP92B2H2*81 3635.00 32FP92W2H2*81 5289.00
32GP92B2H2*81 4575.00 32GP92W2H2*81 6229.00
32HP92B2H2*81 5237.00 32HP92W2H2*81 8064.00
32IP92B2H2*81 11269.00 32IP92W2H2*81 15713.00
32JP92B2H2*81 12302.00 32JP92W2H2*81 16749.00
32CP92F2H2*81
32DP92F2H2*81
32EP92F2H2*81
32FP92F2H2*81
32GP92F2H2*81
32HP92F2H2*81
32IP92F2H2*81
32JP92F2H2*81
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
List Price $
3809.00
3923.00
4596.00
5818.00
6851.00
8860.00
17286.00
18423.00
2421.00
2524.00
3135.00
4083.00
5022.00
6220.00
14008.00
15041.00
32CP92N2H2*81
32DP92N2H2*81
32EP92N2H2*81
32FP92N2H2*81
32GP92N2H2*81
32HP92N2H2*81
32IP92N2H2*81
32JP92N2H2*81
16
Two Separate Windings, 3-Phase (Constant Horsepower)
Enclosure
200
230
Volts Volts
2
5
7 1⁄2
10
15
25
30
40
575
Volts
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
18
27
40
45
60
90
115
135
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
32CP92W1H2*81
32DP92W1H2*81
32EP92W1H2*81
32FP92W1H2*81
32GP92W1H2*81
32HP92W1H2*81
32IP92W1H2*81
32JP92W1H2*81
32CP92F1H2*81
32DP92F1H2*81
32EP92F1H2*81
32FP92F1H2*81
32GP92F1H2*81
32HP92F1H2*81
32IP92F1H2*81
32JP92F1H2*81
Disc
Amp
Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number
30
30
60
60
100
100
200
200
32CP92B1H2*81
32DP92B1H2*81
32EP92B1H2*81
32FP92B1H2*81
32GP92B1H2*81
32HP92B1H2*81
32IP92B1H2*81
32JP92B1H2*81
1758.00
1877.00
2360.00
2946.00
3765.00
4307.00
8478.00
9166.00
3084.00
3205.00
3687.00
4600.00
5419.00
7134.00
12923.00
13611.00
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
List Price $ Catalog Number
List Price $
3393.00
3526.00
4056.00
5061.00
5962.00
7847.00
14215.00
14973.00
2042.00
2163.00
2645.00
3394.00
4213.00
5289.00
11217.00
11906.00
32CP92N1H2*81
32DP92N1H2*81
32EP92N1H2*81
32FP92N1H2*81
32GP92N1H2*81
32HP92N1H2*81
32IP92N1H2*81
32JP92N1H2*81
Dual
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-39
NEMA & General
Purpose Control
2
5
7 1⁄2
7 1⁄2
10
20
25
30
460
Volts
Contactor
Amp
NEMA Half
Rating
Size
Size
NEMA 1
CONTROL
PRODUCTS
Max Hp
Combination Two Speed Heavy Duty Starters
MCP Type, Constant or Variable Torque with Solid State Overload, Class 32
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from
the coil table. Dual voltage coils
are wired on high voltage unless
specified on order.
Replace the (†) with the letter that
corresponds to the correct low speed
FLA in the FLA table.
Field Modification Kits see page
16-79.
Factory Modifications see page
16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Selection
Low Speed FLA Table
Letter
J
F
A
D
G
L
C
H
E
Size
0,1
0,1
0,1
0–13/4
1–4
13/4
2–4
21/2–4
3–4
31/2–4
4
FLA
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
†
A
B
D
E
F
G
H
J
K
L
M
For other voltages and frequencies, see
Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
Overload
200 230 460 575 NEMA Half Amp Motor Circuit
Volts Volts Volts Volts Size Size Range Interrupter ETI Amps
CONTROL
PRODUCTS
16
1
⁄2
2
3
11⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
1
⁄2 1
2
5
3 —
1
1 ⁄2 1
2
5
3
7 1⁄2
1
7 ⁄2 10
— 15
10 —
— 15
15 25
— 30
20 —
— 30
30 50
40 75
50 100
1
5
—
1
5
10
—
15
—
20
25
30
—
30
50
75
100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
32CSB†92B2V* 2619.00 32CSB†92W2V* 3945.00 32CSB†92F2V*
32CSD†92B2V* 2619.00 32CSD†92W2V* 3945.00 32CSD†92F2V*
32CSE†92B2V*
2619.00 32CSE†92W2V* 3945.00 32CSE†92F2V*
32DSB†92B2V* 2722.00 32DSB†92W2V* 4049.00 32DSB†92F2V*
32DSD†92B2V* 2722.00 32DSD†92W2V* 4049.00 32DSD†92F2V*
32DSE†92B2V*
2722.00 32DSE†92W2V* 4049.00 32DSE†92F2V*
32DSF†92B2V*
2722.00 32DSF†92W2V* 4049.00 32DSF†92F2V*
32ESF†92B2V*
3377.00 32ESF†92W2V* 4703.00 32ESF†92F2V*
32ESG†92B2V*
3377.00 32ESG†92W2V* 4703.00 32ESG†92F2V*
32FSF†92B2V*
4161.00 32FSF†92W2V* 5815.00 32FSF†92F2V*
32FSH†92B2V*
4161.00 32FSH†92W2V* 5815.00 32FSH†92F2V*
32GSH†92B2V* 4954.00 32GSH†92W2V* 6608.00 32GSH†92F2V*
32GSJ†92B2V*
4954.00 32GSJ†92W2V* 6608.00 32GSJ†92F2V*
32HSJ†92B2V*
5616.00 32HSJ†92W2V* 8443.00 32HSJ†92F2V*
32HSK†92B2V* 5616.00 32HSK†92W2V* 8443.00 32HSK†92F2V*
32ISL†92B2V* 12483.00 32ISL†92W2V* 16928.00 32ISL†92F2V*
32JTM†92B2V* 13518.00 32JTM†92W2V* 17962.00 32JTM†92F2V*
4340.00
4340.00
4340.00
4455.00
4455.00
4455.00
4455.00
5174.00
5174.00
6397.00
6397.00
7268.00
7268.00
9287.00
9287.00
18621.00
19760.00
2903.00
2903.00
2903.00
3007.00
3007.00
3007.00
3007.00
3661.00
3661.00
4610.00
4610.00
5401.00
5401.00
6599.00
6599.00
15223.00
16256.00
3
10
25
3
10
25
30
40
50
40
50
50
100
100
100
125
150
32CSB†92N2V*
32CSD†92N2V*
32CSE†92N2V*
32DSB†92N2V*
32DSD†92N2V*
32DSE†92N2V*
32DSF†92N2V*
32ESF†92N2V*
32ESG†92N2V*
32FSF†92N2V*
32FSH†92N2V*
32GSH†92N2V*
32GSJ†92N2V*
32HSJ†92N2V*
32HSK†92N2V*
32ISL†92N2V*
32JTM†92N2V*
Two Separate Windings, 3-Phase (Constant or Variable Torque)
NEMA & General
Purpose Control
Max Hp
Enclosure
Overload
200 230 460 575 NEMA Half Amp
Motor Circuit
Volts Volts Volts Volts Size Size Range Interrupter ETI Amps
1
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
1
⁄2
2
3
1 1⁄2
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
1
5
—
1
5
7 1⁄2
10
15
—
15
25
30
—
30
50
75
100
1
5
—
1
5
10
—
15
—
20
25
30
—
30
50
75
100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
0.75–3
2.5–10
9–18
0.75–3
2.5–10
9–18
13–27
13–27
20–40
13–27
22–45
22–45
30–60
30–60
45–90
57–115
67–135
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
32CSB†92B1V* 2240.00
32CSD†92B1V* 2240.00
32CSE†92B1V* 2240.00
32DSB†92B1V* 2360.00
32DSD†92B1V* 2360.00
32DSE†92B1V* 2360.00
32DSF†92B1V* 2360.00
32ESF†92B1V* 2886.00
32ESG†92B1V* 2886.00
32FSF†92B1V*
3472.00
32FSH†92B1V* 3472.00
32GSH†92B1V* 4144.00
32GSJ†92B1V* 4144.00
32HSJ†92B1V* 4686.00
32HSK†92B1V* 4686.00
32ISL†92B1V*
9692.00
32JTM†92B1V* 10380.00
3923.00
3923.00
3923.00
4056.00
4056.00
4056.00
4056.00
4634.00
4634.00
5640.00
5640.00
6379.00
6379.00
8264.00
8264.00
15552.00
16310.00
2524.00
2524.00
2524.00
2645.00
2645.00
2645.00
2645.00
3170.00
3170.00
3920.00
3920.00
4592.00
4592.00
5668.00
5668.00
12432.00
13121.00
3
10
25
3
10
25
30
40
50
40
50
50
100
100
100
125
150
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-40
NEMA 1
32CSB†92W1V* 3566.00 32CSB†92F1V*
32CSD†92W1V* 3566.00 32CSD†92F1V*
32CSE†92W1V* 3566.00 32CSE†92F1V*
32DSB†92W1V* 3687.00 32DSB†92F1V*
32DSD†92W1V* 3687.00 32DSD†92F1V*
32DSE†92W1V* 3687.00 32DSE†92F1V*
32DSF†92W1V* 3687.00 32DSF†92F1V*
32ESF†92W1V* 4213.00 32ESF†92F1V*
32ESG†92W1V* 4213.00 32ESG†92F1V*
32FSF†92W1V* 5126.00 32FSF†92F1V*
32FSH†92W1V* 5126.00 32FSH†92F1V*
32GSH†92W1V* 5798.00 32GSH†92F1V*
32GSJ†92W1V* 5798.00 32GSJ†92F1V*
32HSJ†92W1V* 7513.00 32HSJ†92F1V*
32HSK†92W1V* 7513.00 32HSK†92F1V*
32ISL†92W1V* 14137.00 32ISL†92F1V*
32JTM†92W1V* 14827.00 32JTM†92F1V*
Dual
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
32CSB†92N1V*
32CSD†92N1V*
32CSE†92N1V*
32DSB†92N1V*
32DSD†92N1V*
32DSE†92N1V*
32DSF†92N1V*
32ESF†92N1V*
32ESG†92N1V*
32FSF†92N1V*
32FSH†92N1V*
32GSH†92N1V*
32GSJ†92N1V*
32HSJ†92N1V*
32HSK†92N1V*
32ISL†92N1V*
32JTM†92N1V*
If
motor FLA are unknown, select overload on the
basis that low speed FLA will be no greater than 50%
of high speed FLA.
Discount Schedule NEMA
Combination Two Speed Heavy Duty Starters
MCP Type, Constant Horsepower with Solid State Overload, Class 32
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Ordering Information
Coil Table
Replace the (*) with a letter from
the coil table. Dual voltage coils are
wired on high voltage unless specified
on order.
Replace the (†) with the letter that
corresponds to the correct FLA in the
High/Low Speed FLA table.햴
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
Selection
High/Low Speed FLA Table햴
Letter
24 Separate Control
120 Separate Control
110–120/220–240햲
200–208
220–240
277
220–240/440–480햲
440–480
575–600
J
F
A
D
G
L
C
H
E
Size
0,1
0,1
0,1
0–13⁄4
1–4
13⁄4
2–4
21⁄2–4
3–4
31⁄2–4
4
FLA
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
22–45
30–60
45–90
57–115
67–135
†
A
B
D
E
F
G
H
J
K
L
M
For other voltages and
frequencies see Factory
Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Overload
200 230 460 575 NEMA Half Amp
Motor Circuit
Volts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
—
—
—
—
10
25
40
50
100
100
125
150
32CS††92B2H*
32DS††92B2H*
32ES††92B2H*
32FS††92B2H*
32GS††92B2H*
32HS††92B2H*
32IS††92B2H*
32JT††92B2H*
2619.00
2722.00
3377.00
4161.00
4954.00
5616.00
12483.00
13518.00
32CS††92W2H*
32DS††92W2H*
32ES††92W2H*
32FS††92W2H*
32GS††92W2H*
32HS††92W2H*
32IS††92W2H*
32JT††92W2H*
3945.00
4049.00
4703.00
5815.00
6608.00
8443.00
16928.00
17962.00
32CS††92F2H*
32DS††92F2H*
32ES††92F2H*
32FS††92F2H*
32GS††92F2H*
32HS††92F2H*
32IS††92F2H*
32JT††92F2H*
List Price $ Catalog Number
List Price $
4340.00
4455.00
5174.00
6397.00
7268.00
9287.00
18621.00
19760.00
2903.00
3007.00
3661.00
4610.00
5401.00
6599.00
15223.00
16256.00
32CS††92N2H*
32DS††92N2H*
32ES††92N2H*
32FS††92N2H*
32GS††92N2H*
32HS††92N2H*
32IS††92N2H*
32JT††92N2H*
Two Separate Windings, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Overload
200 230 460 575 NEMA Half Amp
Motor Circuit
Volts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
2
5
7 1⁄2
7 1⁄2
10
20
25
30
3923.00
4056.00
4634.00
5640.00
6379.00
8264.00
15552.00
16310.00
2524.00
2645.00
3170.00
3920.00
4592.00
5668.00
12432.00
13121.00
3
7 1⁄2
10
20
25
40
50
75
3
7 1⁄2
10
20
25
40
50
75
0
1
—
2
—
3
—
4
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
—
—
—
—
10
25
40
50
100
100
125
150
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
32CS††92B1H*
32DS††92B1H*
32ES††92B1H*
32FS††92B1H*
32GS††92B1H*
32HS††92B1H*
32IS††92B1H*
32JT††92B1H*
햲
햳
2240.00
2360.00
2886.00
3472.00
4144.00
4686.00
9692.00
10380.00
32CS††92W1H*
32DS††92W1H*
32ES††92W1H*
32FS††92W1H*
32GS††92W1H*
32HS††92W1H*
32IS††92W1H*
32JT††92W1H*
3566.00
3687.00
4213.00
5126.00
5798.00
7513.00
14137.00
14827.00
Dual voltage coils not available in modified starters.
For conduit hubs and conversion instructions, see
page 16-87.
32CS††92F1H*
32DS††92F1H*
32ES††92F1H*
32FS††92F1H*
32GS††92F1H*
32HS††92F1H*
32IS††92F1H*
32JT††92F1H*
햴
Industrial Use
Weatherproof
Watertight, Dust-tight
32CS††92N1H*
32DS††92N1H*
32ES††92N1H*
32FS††92N1H*
32GS††92N1H*
32HS††92N1H*
32IS††92N1H*
32JT††92N1H*
First † for high speed, second † for low speed. Use
motor nameplate information to select FLA. If motor
FLA are unknown, select overload on the basis that
low speed FLA will be no greater than 50% of high
speed FLA.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-41
NEMA & General
Purpose Control
2
5
7 1⁄2
10
15
25
30
40
CONTROL
PRODUCTS
2
5
7 1⁄2
10
15
25
30
40
Industrial Use
Weatherproof
Watertight, Dust-tight
16
2
5
7 1⁄2
7 1⁄2
10
20
25
30
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Combination Two Speed Heavy Duty Starters
MCP Type, Constant or Variable Torque w/Ambient Compensated Bimetal Overload, Class 32 Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (6 Required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)
Max Hp
Enclosure
200
230 460
575 NEMA Half Motor Circuit
Volts Volts Volts Volts Size Size Interrupter ETI Amps
CONTROL
PRODUCTS
16
1
⁄2
1
3
1 1⁄2
1
3
7 1⁄2
—
10
—
10
10
15
—
25
30
40
1
⁄2
1
1
1
3
3
3
5
5
1
1 ⁄2
1
1
1
3
3
1
7 1⁄2
3
7 ⁄2
1
7 ⁄2 10
10
—
15
15
10
—
—
—
20
20
15
25
25
15
30
30
20
—
—
—
30
30
30
50
50
40
75
75
50
100 100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
NEMA 4/4X Stainless���
NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
32CP92B2VA*81
32CP92B2VB*81
32CP92B2VC*81
32DP92B2VA*81
32DP92B2VB*81
32DP92B2VD*81
32DP92B2VE*81
32EP92B2VF*81
32EP92B2VG*81
32FP92B2VH*81
32FP92B2VJ*81
32GP92B2VK*81
32GP92B2VL*81
32HP92B2VM*81
32HP92B2VN*81
32IP92B2VP*81
32JP92B2VR*81
4255.00
4255.00
4255.00
4370.00
4370.00
4370.00
4370.00
5089.00
5089.00
6313.00
6313.00
7184.00
7184.00
9203.00
9203.00
18536.00
19675.00
2826.00
2826.00
2826.00
2928.00
2928.00
2928.00
2928.00
3584.00
3584.00
4531.00
4531.00
5324.00
5324.00
6522.00
6522.00
15145.00
16178.00
2542.00
2542.00
2542.00
2645.00
2645.00
2645.00
2645.00
3300.00
3300.00
4083.00
4083.00
4875.00
4875.00
5540.00
5540.00
12406.00
13439.00
32CP92W2VA*81
32CP92W2VB*81
32CP92W2VC*81
32DP92W2VA*81
32DP92W2VB*81
32DP92W2VD*81
32DP92W2VE*81
32EP92W2VF*81
32EP92W2VG*81
32FP92W2VH*81
32FP92W2VJ*81
32GP92W2VK*81
32GP92W2VL*81
32HP92W2VM*81
32HP92W2VN*81
32IP92W2VP*81
32JP92W2VR*81
3868.00
3868.00
3868.00
3972.00
3972.00
3972.00
3972.00
4626.00
4626.00
5738.00
5738.00
6531.00
6531.00
8365.00
8365.00
16850.00
17886.00
32CP92F2VA*81
32CP92F2VB*81
32CP92F2VC*81
32DP92F2VA*81
32DP92F2VB*81
32DP92F2VD*81
32DP92F2VE*81
32EP92F2VF*81
32EP92F2VG*81
32FP92F2VH*81
32FP92F2VJ*81
32GP92F2VK*81
32GP92F2VL*81
32HP92F2VM*81
32HP92F2VN*81
32IP92F2VP*81
32JP92F2VR*81
32CP92N2VA*81
32CP92N2VB*81
32CP92N2VC*81
32DP92N2VA*81
32DP92N2VB*81
32DP92N2VD*81
32DP92N2VE*81
32EP92N2VF*81
32EP92N2VG*81
32FP92N2VH*81
32FP92N2VJ*81
32GP92N2VK*81
32GP92N2VL*81
32HP92N2VM*81
32HP92N2VN*81
32IP92N2VP*81
32JP92N2VR*81
Two Separate Windings, 3-Phase (Constant or Variable Torque)
Max Hp
NEMA & General
Purpose Control
NEMA 1
Enclosure
200
230
460
575 NEMA Half Motor Circuit
Volts Volts Volts Volts Size Size Interrupter ETI Amps
1
⁄2
1
3
1
⁄2
1
3
7 1⁄2
—
10
—
10
10
15
—
25
30
40
1
⁄2
1
1
1
3
3
3
5
5
1
⁄2
1
1
1
3
3
7 1⁄2
3
7 1⁄2
7 1⁄2 10
10
—
15
15
10
—
—
—
20
20
15
25
25
15
30
30
20
—
—
—
30
30
30
50
50
40
75
75
50 100
100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
21⁄2
—
—
31⁄2
—
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-42
NEMA 1
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ CatalogNumber
List Price $
32CP92B1VA*81
32CP92B1VB*81
32CP92B1VC*81
32DP92B1VA*81
32DP92B1VB*81
32DP92B1VD*81
32DP92B1VE*81
32EP92B1VF*81
32EP92B1VG*81
32FP92B1VH*81
32FP92B1VJ*81
32GP92B1VK*81
32GP92B1VL*81
32HP92B1VM*81
32HP92B1VN*81
32IP92B1VP*81
32JP92B1VR*81
3838.00
3838.00
3838.00
3971.00
3971.00
3971.00
3971.00
4549.00
4549.00
5554.00
5554.00
6293.00
6293.00
8178.00
8178.00
15466.00
16224.00
2446.00
2446.00
2446.00
2567.00
2567.00
2567.00
2567.00
3093.00
3093.00
3842.00
3842.00
4514.00
4514.00
5591.00
5591.00
12354.00
13043.00
2163.00
2163.00
2163.00
2284.00
2284.00
2284.00
2284.00
2809.00
2809.00
3394.00
3394.00
4066.00
4066.00
4610.00
4610.00
9615.00
10304.00
32CP92W1VA*81
32CP92W1VB*81
32CP92W1VC*81
32DP92W1VA*81
32DP92W1VB*81
32DP92W1VD*81
32DP92W1VE*81
32EP92W1VF*81
32EP92W1VG*81
32FP92W1VH*81
32FP92W1VJ*81
32GP92W1VK*81
32GP92W1VL*81
32HP92W1VM*81
32HP92W1VN*81
32IP92W1VP*81
32JP92W1VR*81
3489.00
3489.00
3489.00
3610.00
3610.00
3610.00
3610.00
4135.00
4135.00
5048.00
5048.00
5719.00
5719.00
7435.00
7435.00
14060.00
14748.00
32CP92F1VA*81
32CP92F1VB*81
32CP92F1VC*81
32DP92F1VA*81
32DP92F1VB*81
32DP92F1VD*81
32DP92F1VE*81
32EP92F1VF*81
32EP92F1VG*81
32FP92F1VH*81
32FP92F1VJ*81
32GP92F1VK*81
32GP92F1VL*81
32HP92F1VM*81
32HP92F1VN*81
32IP92F1VP*81
32JP92F1VR*81
32CP92N1VA*81
32CP92N1VB*81
32CP92N1VC*81
32DP92N1VA*81
32DP92N1VB*81
32DP92N1VD*81
32DP92N1VE*81
32EP92N1VF*81
32EP92N1VG*81
32FP92N1VH*81
32FP92N1VJ*81
32GP92N1VK*81
32GP92N1VL*81
32HP92N1VM*81
32HP92N1VN*81
32IP92N1VP*81
32JP92N1VR*81
Dual
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Combination Two Speed Heavy Duty Starters
MCP, Constant Horsepower w/ Ambient Compensated Bimetal Overload, Class 32
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Heater elements see page 16-148. (6 Required)
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-124.
Wiring Diagrams see page 16-134.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
One Winding Consequent Pole, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
200
230
460
575 NEMA Half
Volts Volts Volts Volts Size Size
1
1
1
3
—
1
3
7 1⁄2
—
10
—
15
20
30
30
40
50
75
1
3
—
1
3
7 1⁄2
—
10
—
20
—
30
40
—
50
75
0
0
0
1
1
1
1
—
—
2
2
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
—
—
31⁄2
—
3
10
25
3
10
25
30
40
50
40
50
50
50
100
125
150
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
32CP92B2HA*81
32CP92B2HB*81
32CP92B2HC*81
32DP92B2HA*81
32DP92B2HB*81
32DP92B2HD*81
32DP92B2HE*81
32EP92B2HF*81
32EP92B2HG*81
32FP92B2HH*81
32FP92B2HJ*81
32GP92B2HK*81
32HP92B2HM*81
32HP92B2HN*81
32IP92B2HP*81
32JP92B2HR*81
4255.00
4255.00
4255.00
4370.00
4370.00
4370.00
4370.00
5089.00
5089.00
6313.00
6313.00
7184.00
9203.00
9203.00
18536.00
19675.00
2826.00
2826.00
2826.00
2928.00
2928.00
2928.00
2928.00
3584.00
3584.00
4531.00
4531.00
5324.00
6522.00
6522.00
15145.00
16178.00
2542.00
2542.00
2542.00
2645.00
2645.00
2645.00
2645.00
3300.00
3300.00
4083.00
4083.00
4875.00
5540.00
5540.00
12406.00
13439.00
32CP92W2HA*81
32CP92W2HB*81
32CP92W2HC*81
32DP92W2HA*81
32DP92W2HB*81
32DP92W2HD*81
32DP92W2HE*81
32EP92W2HF*81
32EP92W2HG*81
32FP92W2HH*81
32FP92W2HJ*81
32GP92W2HK*81
32HP92W2HM*81
32HP92W2HN*81
32IP92W2HP*81
32JP92W2HR*81
3868.00
3868.00
3868.00
3972.00
3972.00
3972.00
3972.00
4626.00
4626.00
5738.00
5738.00
6531.00
8365.00
8365.00
16850.00
17886.00
32CP92F2HA*81
32CP92F2HB*81
32CP92F2HC*81
32DP92F2HA*81
32DP92F2HB*81
32DP92F2HD*81
32DP92F2HE*81
32EP92F2HF*81
32EP92F2HG*81
32FP92F2HH*81
32FP92F2HJ*81
32GP92F2HK*81
32HP92F2HM*81
32HP92F2HN*81
32IP92F2HP*81
32JP92F2HR*81
32CP92N2HA*81
32CP92N2HB*81
32CP92N2HC*81
32DP92N2HA*81
32DP92N2HB*81
32DP92N2HD*81
32DP92N2HE*81
32EP92N2HF*81
32EP92N2HG*81
32FP92N2HH*81
32FP92N2HJ*81
32GP92N2HK*81
32HP92N2HM*81
32HP92N2HN*81
32IP92N2HP*81
32JP92N2HR*81
CONTROL
PRODUCTS
⁄2
1 1⁄2
2
1
⁄2
1 1⁄2
3
5
—
7 1⁄2
7 1⁄2
10
—
15
25
30
40
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
16
⁄2
1 1⁄2
2
1
⁄2
1 1⁄2
3
5
—
7 1⁄2
—
7 1⁄2
—
10
20
25
30
Motor Circuit
Interrupter ETI Amps
NEMA 1
Two Separate Windings, 3-Phase (Constant Horsepower)
Max Hp
Enclosure
1
⁄2
1 1⁄2
2
1
⁄2
1 1⁄2
3
5
—
7 1⁄2
—
7 1⁄2
—
10
20
25
30
1
⁄2
1 1⁄2
2
1
⁄2
1 1⁄2
3
5
—
7 1⁄2
7 1⁄2
10
—
15
25
30
40
460
575 NEMA Half
Volts Volts Size Size
1
3
—
1
3
7 1⁄2
—
10
—
15
20
30
30
40
50
75
1
3
—
1
3
7 1⁄2
—
10
—
20
—
30
40
—
50
75
0
0
0
1
1
1
1
—
—
2
2
—
3
3
—
4
—
—
—
—
—
—
—
13⁄4
13⁄4
—
—
21⁄2
—
—
31⁄2
—
Motor Circuit
Interrupter ETI Amps
3
10
25
3
10
25
30
40
50
40
50
50
50
100
125
150
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
NEMA 4/4X Stainless��� NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
NEMA 12, NEMA 3/3R���
NEMA 4 Painted
Industrial Use
Weatherproof
Watertight, Dust-tight
Catalog Number List Price $ Catalog Number List Price $ Catalog Number
List Price $ Catalog Number
List Price $
32CP92B1HA*81 2163.00
32CP92B1HB*81 2163.00
32CP92B1HC*81 2163.00
32DP92B1HA*81 2284.00
32DP92B1HB*81 2284.00
32DP92B1HD*81 2284.00
32DP92B1HE*81 2284.00
32EP92B1HF*81 2809.00
32EP92B1HG*81 2809.00
32FP92B1HH*81 3394.00
32FP92B1HJ*81 3394.00
32GP92B1HK*81 4066.00
32HP92B1HM*81 4610.00
32HP92B1HN*81 4610.00
32IP92B1HP*81 9615.00
32JP92B1HR*81 10304.00
3838.00
3838.00
3838.00
3971.00
3971.00
3971.00
3971.00
4549.00
4549.00
5554.00
5554.00
6293.00
7955.00
7955.00
15466.00
16224.00
2446.00
2446.00
2446.00
2567.00
2567.00
2567.00
2567.00
3093.00
3093.00
3842.00
3842.00
4514.00
5591.00
5591.00
12354.00
13043.00
32CP92W1HA*81 3489.00
32CP92W1HB*81 3489.00
32CP92W1HC*81 3489.00
32DP92W1HA*81 3610.00
32DP92W1HB*81 3610.00
32DP92W1HD*81 3610.00
32DP92W1HE*81 3610.00
32EP92W1HF*81 4135.00
32EP92W1HG*81 4135.00
32FP92W1HH*81 5048.00
32FP92W1HJ*81 5048.00
32GP92W1HK*81 5719.00
32HP92W1HM*81 7435.00
32HP92W1HN*81 7435.00
32IP92W1HP*81 14060.00
32JP92W1HR*81 14748.00
32CP92F1HA*81
32CP92F1HB*81
32CP92F1HC*81
32DP92F1HA*81
32DP92F1HB*81
32DP92F1HD*81
32DP92F1HE*81
32EP92F1HF*81
32EP92F1HG*81
32FP92F1HH*81
32FP92F1HJ*81
32GP92F1HK*81
32HP92F1HM*81
32HP92F1HN*81
32IP92F1HP*81
32JP9F1HR*81
32CP92N1HA*81
32CP92N1HB*81
32CP92N1HC*81
32DP92N1HA*81
32DP92N1HB*81
32DP92N1HD*81
32DP92N1HE*81
32EP92N1HF*81
32EP92N1HG*81
32FP92N1HH*81
32FP92N1HJ*81
32GP92N1HK*81
32HP92N1HM*81
32HP92N1HN*81
32IP92N1HP*81
32JP92N1HR*81
Dual
voltage coils not available in modified starters.
conduit hubs and conversion instructions, see
page 16-87.
For
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-43
NEMA & General
Purpose Control
200
230
Volts Volts
NEMA 1
Heavy Duty Contractors
3-Phase, Class 40
Selection
Ordering Information
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-106 open and 16-115 enclosed.
Wiring Diagrams see page 16-140.
Replacement Parts see page 16-155.
䊳
䊳
䊳
䊳
䊳
䊳
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
Open Type
NEMA 1
NEMA 4/4X
Stainless
CONTROL
PRODUCTS
16
General Purpose
Catalog
Number
1 1⁄2
3
7 1⁄2
10
10
15
25
30
40
75
150
—
—
40BP32A*
40CP32A*
40DP32A*
40EP32A*
40FP32A*
40GP32A*
40HP32A*
40IP32A*
40JG32A*
40LP32A*
40MP32A*
40NH32A*
40PH32A*
2
5
10
15
25
30
50
75
100
200
400
600
900
2
5
10
15
25
30
50
75
100
200
400
600
900
9
18
27
40
45
60
90
115
135
270
540
810
1215
00
0
1
—
2
—
3
—
4
5
6
7
8
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
NEMA 12
NEMA 3/3R
NEMA 7 & 9
NEMA 3 & 4
Watertight, Dust-tight Watertight, Dust-tight Div1 and Div 2
Industrial Use
Corrosion Resistant
Corrosion Resistant
Class I Groups C & D Weatherproof
304 Stainless Steel
Class II Groups E,F&G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Contactor
200
230
460
575 Amp
NEMA Half
Volts Volts Volts Volts Rating Size
Size
1 1⁄2
3
7 1⁄2
10
15
20
30
40
50
100
200
300
450
NEMA 4X
Fiberglass
List
Catalog
Price $ Number
198.00
249.00
293.00
422.00
534.00
698.00
861.00
1723.00
2067.00
4506.00
12044.00
17042.00
27103.00
List
Price $
40BP32B*
40CP32B*
40DP32B*
40EP32B*
40FP32B*
40GP32B*
40HP32B*
40IP32B*
40JG32B*
40LP32B*
40MP32B*
40NH32B*
40PH32B*
216.00
268.00
310.00
440.00
621.00
827.00
1033.00
2084.00
2430.00
5168.00
15223.00
20487.00
31893.00
Catalog
Number
Use Size 0
40CP32W*
40DP32W*
40EP32W*
40FP32W*
40GP32W*
40HP32W*
40IP32W*
40JG32W*
40LP32E*
40MP32E*
40NH32E*
40PH32E*
List
Catalog
Price $ Number
—
578.00
621.00
750.00
1240.00
1577.00
1912.00
3584.00
3928.00
7064.00
19530.00
24794.00
35929.00
Use Size 0
40CP32F*
40DP32F*
40EP32F*
40FP32F*
40GP32F*
40HP32F*
40IP32F*
40JG32F*
—
—
—
—
List
Catalog
Price $ Number
List
Catalog
Price $ Number
—
635.00
684.00
824.00
1364.00
1735.00
2103.00
3943.00
4322.00
—
—
—
—
—
1137.00
1189.00
1319.00
1912.00
2377.00
2860.00
4282.00
4626.00
9597.00
—
—
—
Use Size 0
40CP32H*
40DP32H*
40EP32H*
40FP32H*
40GP32H*
40HP32H*
40IP32H*
40JG32H*
40LP32H*
—
—
—
List
Price $
Use Size 0
40CP320*
40DP320*
40EP320*
40FP320*
40GP320*
40HP320*
40IP320*
40JG320*
40LP320*
40MP320*
40NH320*
40PH320*
—
371.00
414.00
414.00
810.00
1033.00
1258.00
2826.00
3170.00
7064.00
17549.00
22812.00
27103.00
Extra Wide Enclosure, 3-Phase, 3-Pole
NEMA & General
Purpose Control
Max Hp
Enclosure
200
Volts
230
Volts
1 1⁄2
3
7 1⁄2
10
10
15
25
30
40
1 1⁄2
3
7 1⁄2
10
15
20
30
40
50
460
Volts
575
Volts
2
5
10
15
25
30
50
75
100
2
5
10
15
25
30
50
75
100
Contactor
Amp
NEMA Half
Range
Size
Size
9
18
27
40
45
60
90
115
135
00
0
1
—
2
—
3
—
4
—
—
—
1 3/4
—
2 1/2
—
3 1/2
—
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Dual voltage coils not available in size 5-8 starters.
For conduit hubs and conversion instructions, see
page 16-87.
NEMA 1
NEMA 4/4X Stainless
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Catalog Number
40BP82B*
40CP82B*
40DP82B*
40EP82B*
40FP82B*
40GP82B*
40HP82B*
40IP82B*
40JG82B*
List Price $
467.00
528.00
570.00
700.00
846.00
1035.00
1352.00
2284.00
2628.00
Enclosure is NEMA
Only available
Catalog Number
Use Size 0
40CP82W*
40DP82W*
40EP82W*
40FP82W*
40GP82W*
40HP82W*
40IP82W*
40JG82W*
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Industrial Use
Weatherproof
List Price $ Catalog Number
—
982.00
1025.00
1154.00
1912.00
2101.00
3782.00
4712.00
5057.00
Type 4 (painted steel).
F coil 100-250V AC 50/60Hz, or DC
H coil 150-500V AC 50/60Hz, or DC
Only available
F coil100-250V AC 50/60Hz, or DC
Use Size 0
40CP82H*
40DP82H*
40EP82H*
40FP82H*
40GP82H*
40HP82H*
40IP82H*
40JG82H*
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
—
1929.00
1973.00
2101.00
2695.00
3160.00
3420.00
4840.00
5185.00
Use Size 0
40CP820*
40DP820*
40EP820*
40FP820*
40GP820*
40HP820*
40IP820*
40JG820*
—
586.00
629.00
758.00
1215.00
1404.00
2317.00
3248.00
3592.00
Standard Auxiliary Contacts
Type
All FVNR
Starters &
Contactors
Lugs
16-44
List Price $ Catalog Number List Price $
Size (3rd Character)
Configuration
B Thru E
1N.O.
Internal / External
Internal
F Thru J
1N.O.
External
L Thru M
2N.O., 2N.C.
External
N Thru P
1N.O., 1N.C.
External
are not included, refer to page 16-86.
Discount Schedule NEMA
Heavy Duty Contactors
Single Phase, 4-Pole & Vacuum, Class 40
Selection
Ordering Information
Coil Table
Replace the (*) with a letter from the coil table.
Dual voltage coils are wired on high voltage unless
specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-106 open and 16-115
enclosed.
Wiring Diagrams see page 16-140.
Replacement Parts see page 16-155.
䊳
䊳
䊳
䊳
䊳
䊳
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, Single Phase, 2-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purposes
208/
115
230
Volts Volts
1
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Watertight, Dust-tight
Corrosion Resistant
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosure
Indoor/Outdoor Use
Industrial Use
Weatherproof
Contactor
Amp
NEMA
Rating Size
Half
Size
Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No
9
18
27
35
45
60
90
115
135
—
—
—
—
—
21⁄2
—
31⁄2
—
40BP12A*
40CP12A*
40DP12A*
40EP12A*
40FP12A*
40GP12A*
40HP12A*
40IP12A*
40JG12A*
00
0
1
1P
2
—
3
—
4
172.00
224.00
268.00
344.00
500.00
647.00
793.00
1568.00
1912.00
40BP12B*
40CP12B*
40DP12B*
40EP12B*
40FP12B*
40GP12B*
40HP12B*
40IP12B*
40JG12B*
189.00
242.00
285.00
362.00
586.00
775.00
965.00
1930.00
2274.00
Use Size 0
40CP12W*
40DP12W*
40EP12W*
40EP12W*
40GP12W*
40HP12W*
40IP12W*
40JG12W*
—
551.00
595.00
1206.00
1206.00
1526.00
1844.00
3428.00
3773.00
List Price $
Catalog No
—
607.00
655.00
1327.00
1327.00
1679.00
2029.00
3772.00
4151.00
Use Size 0
40CP12H*
40DP12H*
40EP12H*
40FP12H*
40GP12H*
40HP12H*
40IP12H*
40JG12H*
Use Size 0
40CP12F*
40DP12F*
40EP12F*
40EP12F*
40GP12F*
40HP12F*
40IP12F*
40JG12F*
List Price $ Catalog No List Price $
—
1112.00
1163.00
1240.00
1877.00
2163.00
2791.00
4126.00
4471.00
Use Size 0
40CP120*
40DP120*
40EP120*
40FP120*
40GP120*
40HP120*
40IP120*
40JG120*
—
344.00
388.00
465.00
775.00
982.00
1189.00
2670.00
3015.00
Open Type & Standard Width Enclosure, 4-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
NEMA 4/4X
Stainless
NEMA 4X
Fiberglass
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Watertight, Dust-tight
Corrosion Resistant
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosure
Indoor/Outdoor Use
Industrial Use
Weatherproof
1
⁄3
2
3
5
1 1⁄2
3
7 1⁄2
10
2
5
10
15
2
5
10
15
9
18
27
40
00
0
1
—
—
—
—
13⁄4
40BP22A*
40CP22A*
40DP22A*
40EP22A*
224.00
319.00
362.00
491.00
40BP22B*
40BP22B*
40DP22B*
40EP22B*
242.00
242.00
379.00
509.00
Use Size 0
40CP22W*
40DP22W*
40EP22W*
—
647.00
689.00
819.00
Use Size 0
40CP22F*
40DP22F*
40EP22F*
—
711.00
758.00
901.00
Use Size 0
40CP22H*
40DP22H*
40EP22H*
—
1206.00
1258.00
1387.00
Use Size 0
40CP220*
40DP220*
40EP220*
—
440.00
482.00
612.00
Vacuum Contactors, 3-Phase, 3-Pole
Max Hp
200V
230V
460V
575V
40
75
150
50
100
200
100
200
400
100
200
400
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Dual
voltage coils not available for vacuum contactors.
Refer to Page 16-94 for a complete list of available coil
voltages.
Discount Schedule NEMA
For
Contactor
Amp
Rating
135
270
540
conduit hubs and conversion instructions, see page
16-87.
To order single phase contactor in an extra wide enclosure, order the enclosure kit from Page 16-90 and the
open style contactor as separate items.
Open Type
NEMA
Size
Catalog Number
4
5
6
40JV32A*
40LV32A*
40MV32A*
List Price $
2397.00
4842.00
13539.00
Coils
D, F, or G will be wired for incoming voltage.
J coil will be wired for separate source. Coils E, H,
and L do not apply to single phase starters.
1 NO Auxiliary.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-45
NEMA & General
Purpose Control
Contactor
200 230 460
575 Amp NEMA Half
Volts Volts Volts Volts Rating Size
Size Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $
CONTROL
PRODUCTS
1
2
3
5
7 1⁄2
10
15
—
—
NEMA 4X
Fiberglass
16
⁄3
1
2
3
3
5
7 1⁄3
—
—
NEMA 4/4X
Stainless
Reversing Heavy Duty Contactors
Class 43
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Replace the (*) with a letter from the coil table. Dual voltage coils are
wired on high voltage unless specified on order.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see pages 16-107 open and 16-120 enclosed.
Wiring Diagrams see page 16-140.
Replacement Parts see page 16-155.
60Hz Voltage
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
Letter
J
F
A
D
G
L
C
H
E
For other voltages and frequencies,
see Factory Modifications page 16-94.
Open Type & Standard Width Enclosure, 3-Phase, 3-Pole
Max Hp
Enclosure
Open Type
NEMA 1
General Purpose
Contactor
200 230 460 575 Amp NEMA Half Catalog
Volts Volts Volts Volts Rating Size Size Number
CONTROL
PRODUCTS
16
1
⁄2
3
7 1⁄2
10
10
15
25
30
40
75
100
—
—
1
⁄2
3
7 1⁄2
10
15
20
30
40
50
100
200
300
450
2
5
10
15
25
30
50
75
100
200
400
600
900
2
5
10
15
25
30
50
75
100
200
400
600
900
9
18
27
40
45
60
90
115
135
270
540
810
1215
00
0
1
—
2
—
3
—
4
5
6
7
8
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
43BP32A*
43CP32A*
43DP32A*
43EP32A*
43FP32A*
43GP32A*
43HP32A*
43IP32A*
43JG32A*
43LP32A*
43MP32A*
43NH32A*
43PH32A*
List
Catalog
Price $ Number
517.00
621.00
707.00
965.00
1344.00
1784.00
2231.00
4875.00
5566.00
11113.00
26172.00
37088.00
72272.00
NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9
Watertight, Dust-tight NEMA 3 & 4
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
List
Catalog
Price $ Number
List
Price $
Corrosion Resistant
Catalog
Number
43BP32B*
551.00 Use Size 0
—
Use Size 0
43CP32B*
655.00 43CP32W*
1051.00 43CP32F*
43DP32B*
758.00 43DP32W*
1309.00 43DP32F*
43EP32B*
1016.00 43EP32W*
1568.00 43EP32F*
43FP32B*
1482.00 43FP32W*
2377.00 43FP32F*
43GP32B* 1973.00 43GP32W*
3084.00 43GP32F*
43HP32B* 2473.00 43HP32W*
3799.00 43HP32F*
43IP32B*
5324.00 43IP32W*
7668.00 43IP32F*
43JG32B* 6013.00 43JG32W*
8357.00 43JG32F*
43LP32B* 13707.00 43LP32E*
16739.00 —
43MP32B* 30480.00 43MP32E* 34788.00 —
43NH32B* 41395.00 43NH32E*
45703.00 —
—
—
—
—
—
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Industrial Use
Class I Groups C & D
Weatherproof
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
List
Catalog
Price $ Number
List
Price $
Catalog
Number
List
Price $
—
1156.00
1442.00
1725.00
2616.00
3393.00
4179.00
8435.00
9193.00
—
—
—
—
—
2137.00
2360.00
2620.00
3938.00
5023.00
6323.00
11491.00
12182.00
—
—
—
—
Use Size 0
43CP320*
43DP320*
43EP320*
43FP320*
43GP320*
43HP320*
43IP320*
43JG320*
43LP320*
43MP320*
43NH320*
—
—
810.00
914.00
1172.00
1740.00
2387.00
3042.00
6203.00
6892.00
15534.00
32124.00
43721.00
—
Use Size 0
43CP32H*
43DP32H*
43EP32H*
43FP32H*
43GP32H*
43HP32H*
43IP32H*
43JG32H*
—
—
—
—
Open Type & Standard Width Enclosure, Single Phase, 3-Wire, 2-Pole
Max Hp
Enclosure
NEMA & General
Purpose Control
Open Type
Cont208/ actor
115 230 Amp NEMA
Volts Volts Rating Size Catalog No
1 1⁄3
1
2
3
1
2
3
5
9
18
27
35
00
0
1
1P
43BP12A*
43CP12A*
43DP12A*
43EP12A*
NEMA 1
NEMA 4/4X Stainless NEMA 4X Fiberglass
General Purpose
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
List Price $ Catalog No List Price $ Catalog No
500.00
603.00
689.00
947.00
43BP12B*
43CP12B*
43DP12B*
43EP12B*
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Dual voltage coils not available in size 5–8 starters.
For conduit hubs and conversion instructions, see
page 16-87.
16-46
534.00
637.00
741.00
1000.00
Use Size 0
43CP12W*
43DP12W*
43EP12W*
List Price $
—
1033.00
1293.00
1551.00
Watertight, Dust-tight
Corrosion Resistant
NEMA 7 & 9
NEMA 3 & 4
NEMA 12
NEMA 3/3R
Div 1 and Div 2
Class I Groups C & D
Class II Groups E, F & G
Class III
Bolted Enclosures
Indoor/Outdoor Use
Industrial Use
Weatherproof
Catalog No
List Price $
Catalog No
List Price $
Use Size 0
43CP12F*
43DP12F*
43EP12F*
—
1137.00
1423.00
1706.00
Use Size 0
43CP12H*
43DP12H*
43EP12H*
—
2231.00
2343.00
2602.00
Enclosure
Coils D, F,
is NEMA Type 4 (painted steel).
or G will be wired for incoming voltage. J
coil will be wired for separate source. Coils E, H, and
L do not apply to single phase starters.
Only available
F coil 100-250V AC 50/60Hz, or DC
H coil 150-500V AC 50/60Hz, or DC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog No
Use Size 0
43CP120*
43DP120*
43EP120*
List Price $
—
793.00
896.00
1154.00
Only
available
F coil 100-250V AC 50/60Hz, or DC
contacts
43B-43E 4th pole built-in
43F-43J 2 NO & 2 NC
Auxiliary
Discount Schedule NEMA
Overload Relays
Solid State ESP100 & 3RB20, Special Use 958, Oil Field 958L, and Thermal
Features
Application
ESP100 Solid State Overloads
ESP100 solid state overload relays are
self powered, requiring no separate 120V
source to power the circuit board. They
provide phase loss protection, fewer
connection points and high repeat trip
accuracy which results in longer motor
life and cost savings. NEMA Class 10, 20
and 30 trip curves are available for a
variety of applications.
The ESP100 solid state overload
provides phase loss protection for the
motor by tripping within three seconds
upon complete loss of one phase of a
three phase motor branch circuit.
958 overload dials denote must hold
amps. Must trip amps are 112% of the
must hold setting.
958L ESP100 Oil Field Solid State
Overload Relays
958L ESP100 solid state overloads are
designed specifically for the oil market
and the cyclical loads experienced with
these types of pumping applications.
These overloads provide protection
on all standard motors, oil well pump
motors, multi-torque connections,
and ultra-high slip motors.
Each overload has at least a 2:1 current
adjustment range with the adjustment
dial reading out in full load amps. In
addition to the markings on the dial
there are audible clicks which allow
for extremely fine tuning.
The heaterless construction of these
overloads minimizes energy costs
and the costs of cabinet ventilation or
cooling. Solid state overloads can be
used at temperatures from – 30°C to
ѿ70°C and are rated for 50Hz and
60Hz applications.
ESP100 panel mounted overloads can
be used to upgrade existing starter
applications where panel mounted
thermal overloads are used. In addition,
ESP100 overloads can be panel
mounted when used with other types
of controllers, such as DP, IEC
contactors, and soft starts.
ESP100 overloads can be used on high
voltage applications, making them ideal
for use with vacuum contactors and
other high voltage control.
ESP100 overloads can be retrofitted
on existing contactors using the retrofit
plate suffixes or on other brands using
the plates listed in the competitive retrofit plates table on page 16-48.
958 ESP100 Special Use Solid State
Overloads
958 ESP100 special use solid state
overloads provide excellent protection
of hermetically sealed compressors and
Figure 1
27
24
13
22
20
ESP100 Solid State
Overload
958 or 958L Solid State
Overload
15
18
TYPICAL SOLID-STATE
OVERLOAD ADJUSTMENT
DIAL MARKINGS
Ambient Compensated
Bimetal—Single Phase
and Three Phase
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-47
NEMA & General
Purpose Control
Ambient Compensated Bimetal
Overloads
These thermal type overload relays are
used to protect motors from excessive
heat resulting from sustained motor
overloads, rapid motor cycling and
stalled rotor conditions. Although these
devices function based on thermal
principles they are designed to
compensate for the ambient air
temperature surrounding the overload.
This helps prevent the occurrence of
nuisance tripping when there are high
surrounding ambient temperatures.
The percentage of overload determines
the length of time required to open the
circuit.
CONTROL
PRODUCTS
Rotors can be damaged in 8 to 15
seconds during motor stall conditions
if electrical power is not removed. To
prevent damage during motor stall,
the 958L solid-state overload removes
power in 7 seconds at 250% locked
rotor current. Therefore, die cast or
fabricated rotors will be protected
from damage saving the user both
time and money.
16
▪ Solid State ESP100, 958 & 958L
Overloads
—Phase Loss Protection —Trips
Within 3 Seconds
—Ambient Insensitive
—Heaterless Design
—Self-Powered
—앐 2% Repeat Trip Accuracy
—NEMA Class 10, 20 & 30 Trip
Curves Available
—FLA Adjustment Dial with Wide
Adjustment Range (Fig. 1)
—Short Circuit Self Protected
—Thermal Memory Circuit
—Conformally Coated Circuit Board
— – 22°F to 159°F (– 30°C to 70°C)
—NC Contact Rated NEMA A600,
P600 (10 Amps 600VAC Max.,
5 Amps 600VDC Max.)
—“Must Hold Amps” Adjustment Dial
(958 only)
Ambient
Compensated Bimetal
▪
Overloads
—Automatic or manual reset adjustment
—A manual test button is provided to
test the operation of the 3-pole
overload relay control contacts
—앐15% nominal trip current adjustment
—Accept either standard Class 20 or
Quick Trip (NEMA Class 10) heater
elements without any other
changes or adjustments
—Available with a normally open contact
for an alarm circuit (SPDT) up to 60A
—Compensated bimetal overload relays
provide a constant trip time in ambient temperatures from –20°F to
ѿ170°F for a given heater rating
▪ UL Listed File #E22655 or Component
Recognized
▪ CSA Certified File #LR6535
▪ 3RB20 Solid State Overload Relay
—Marking Strip
—STOP button
—1 NO and 1 NC contacts
—Trip class 10 or 20
—Test function and switch position
indicator
—4:1 current adjustment dial e.g. 160630A
—Phase loss protection
—Self-powered
General
artificially cooled motors which require
ambient insensitivity and quick trip
response times. Combined with a
series lockout relay, they can provide
unsurpassed protection for hermetically
sealed compressor motors in air
conditioning applications. The combination
of high trip speed, current adjustment, and
ease of installation makes it suitable for
these applications. The trip curves have
been custom tailored to provide proper
overload protection on such loads without
causing nuisance tripping.
Overload Relays
Solid State and Thermal, Class 48, ESP100 and 3RB20
Selection
Ordering Information
䊳
䊳
3RB20 Solid State
Overload Relay
ESP100 Solid State
Overload Relay
䊳
䊳
Ambient Compensated
Bimetal 3-Phase
Overload Relay
For Thermal Overloads, order heater elements by code number at $13.00 each.
Field Modification Kits see page 16-79.
Dimensions see page 16-108.
To retrofit existing Thermal Furnas Brand Starters with the ESP100 Solid State Overload
Relay add the appropriate suffix to the end of the catalog number from the Retrofit Plates
table shown below and also add $14.30 to the list price. Example: 48ASE3M201P. Or order
the Plate Kit Separate 49ASMP1, 2, or 3.
CONTROL
PRODUCTS
16
Solid State—Class 48 ESP100, 3-Phase, Single Phase (Panel Mount and Replacement)
Full Load
Amp
Current Range
0.25–1
0.75–3
2.5–10
9–18
13–27
20–40
13–27
22–45
30–60
45–90
57–115
67–135
81–162
100–210
100–270
200–540
250–750
420–820
420–1220
0.25-1
0.75-3
2.5-10
5-16
Phase
Frame
Size
Manual Reset
Class 10
Catalog Number
List
Price $
Manual Reset
Class 20
Catalog Number
List
Price $
Manual Reset
Class 30
Catalog Number
List
Price $
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
A
A
A
A1
A1
A1
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
48ASA3M10
48ASB3M10
48ASD3M10
48ASE3M10
48ASF3M10
48ASG3M10
48BSF3M10
48BSH3M10
48BSJ3M10
48BSK3M10
48BSL3M10
48BSM3M10
48BSN3M10
48ASS3M10
48ASU3M10
48ASX3M10
48CSH3M10
48CSY3M10
48CSZ3M10
48ASA1M10
48ASB1M10
48ASD1M10
48ASE1M10
117.00
117.00
117.00
117.00
117.00
151.00
163.00
163.00
198.00
198.00
289.00
289.00
289.00
143.00
143.00
143.00
143.00
143.00
143.00
107.00
107.00
107.00
107.00
48ASA3M20
48ASB3M20
48ASD3M20
48ASE3M20
48ASF3M20
48ASG3M20
48BSF3M20
48BSH3M20
48BSJ3M20
48BSK3M20
48BSL3M20
48BSM3M20
48BSN3M20
48ASS3M20
48ASU3M20
48ASX3M20
48CSH3M20
48CSY3M20
48CSZ3M20
48ASA1M20
48ASB1M20
48ASD1M20
48ASE1M20
117.00
117.00
117.00
117.00
117.00
151.00
163.00
163.00
198.00
198.00
289.00
289.00
289.00
143.00
143.00
143.00
143.00
143.00
143.00
107.00
107.00
107.00
107.00
48ASA3M30
48ASB3M30
48ASD3M30
48ASE3M30
48ASF3M30
48ASG3M30
48BSF3M30
48BSH3M30
48BSJ3M30
48BSK3M30
48BSL3M30
48BSM3M30
48BSN3M30
48ASS3M30
48ASU3M30
48ASX3M30
48CSH3M30
48CSY3M30
48CSZ3M30
48ASA1M30
48ASB1M30
48ASD1M30
48ASE1M30
117.00
117.00
117.00
117.00
117.00
151.00
163.00
163.00
198.00
198.00
289.00
289.00
289.00
143.00
143.00
143.00
143.00
143.00
143.00
107.00
107.00
107.00
107.00
Solid State—3RB206, 3-Phase
For
Contactor
Size
Setting
Range
Amps
Manual/Automatic Reset
Class 10
List
Catalog Number
Price $
5
6
55-250
160-630
3RB2066-1GC2
3RB2066-1MC2
377.00
540.00
Class 20
Catalog Number
List
Price $
3RB2066-2GC2
3RB2066-2MC2
397.00
560.00
NEMA & General
Purpose Control
Ambient Compensated Bimetal—Open Type Class 48 Single Phase, 3-Phase (Panel Mount Only)
Poles
1
3
Amp
Rating
Auxiliary Contacts
25
60
100
180
30
30
60
60
100
180
1 NC
1 NC
1 NC
1 NC
1 NC
1 NO/NC
1 NC
1 NO/NC
3 NC
3 NC
Contact
Rating
5A (B600)
&
5A (P300)
10A (A600)
&
5A (P300)
5A (B600) & 5A (P300)
Catalog Number
List
Price $
48DA18AA4
48GA18AA4
48HA18AA4
48JA18AA4
48DC38AA4
48DC39AA4
48GC38AA4
48GC39AA4
48HA38AA4
48JA38AA4
38.00
56.00
72.00
117.00
77.00
111.00
111.00
147.00
198.00
285.00
Retrofit Plates for Contactors, Class 48
Replacement for Starter Sizes
ESP100 Overload Frame Size
Retrofit Plate Suffix
Plate Kit Separate
Price Adder $
Size 00–13⁄4
Size 2, 21⁄2
Size 3, 31⁄2
Size 4
A or A1
B
B
B
1P
2P
3P
4P
49ASMP1
49ASMP2
49ASMP3
49ASMP3
14.30
14.30
14.30
14.30
To
determine frame size of replacement solid state
overload, refer to retrofit plates table above.
Temperature rating Ҁ20° to 60°C.
Requires use of 300:5 Current Transformers–3 of
97CT005.
Requires use of 600:5 Current Transformers–3 of
97CT008.
16-48
Requires
use of 1200:5 Current Transformers–3 of
97CT012.
Overload has busbar connections.
Discount Code: IEC.
Requires use of 750:5 Current Transformers–3 of
97CT009.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
See
note under Ordering Information to retrofit
existing Thermal Starters with ESP100 Solid State
Overload Relay.
For replacement of Starter Mounted Overload Relay,
refer to page 16-157.
Discount Schedule NEMA
Overload Relays
Special Use Solid State Overloads, Class 958 and 958L
Selection
Ordering Information
䊳
䊳
Standard Class 958 — Manual Reset, Trip Curve A
Full Load Amp
Current Range
Phase
For Use On
Controller Sizes
Catalog
Number
Rating
Catalog No.
List Price $
150:5
97CT002
158.00
200:5
97CT003
158.00
250:5
97CT004
158.00
300:5
97CT005
158.00
400:5
97CT006
158.00
600:5
97CT008
158.00
750:5
97CT009
158.00
1200:5
97CT012
158.00
Oil Field Class 958L —Manual Reset
List
Price $
15–30
3
1– 1 3⁄4
958AA32A
323.00
22–44
3
1 3⁄4
958BA32A
323.00
33–66
3
2–3
958CA32A
374.00
50–100
3
3 –3 1⁄2
958DA32A
374.00
75–150
3
4
958EA32A
410.00
90–180
3
4
958FA32A
430.00
Full Load Amp
Current Range
5.6–11.6
7–14
11–22
14–28
18–36
20–40
18–36
28–56
35–70
43–86
50–90
60–126
75–150
84–174
105–210
132–264
264–528
Phase
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
For Use On
Controller Sizes
3
0–1 ⁄4
0–1 3⁄4
1, 1 3⁄4
1, 1 3⁄4
1 3⁄4
1 3⁄4
2–4
2 1⁄2–4
3–4
3–4
3–4
4
—
—
—
—
—
Catalog
Number
958L109307U
958L109308U
958L109309U
958L109330U
958L109331U
958L109332U
958L109313U
958L109314U
958L109329U
958L109315U
958L109311U
958L109316U
958L109312U
958L109327U
958L109328U
958L109522U
958L109523U
List
Price $
158.00
158.00
158.00
158.00
193.00
193.00
206.00
239.00
239.00
239.00
239.00
330.00
186.00
186.00
186.00
186.00
186.00
958L Trip Curve
16
Trip Curve A
Current Transformers
Field Modification Kits see page 16-79.
Dimensions see page 16-108.
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Temperature
rating 앥20° to 쎵60°C.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-49
Current Sensitive Relay
Class 97
General
Features
Electrical Data
▪ Start Up Delay
▪ Trip Delay
▪ Overcurrent or Undercurrent Trip
Applications
▪ Manual or Automatic Reset
Start-up delay, trip delay and current trip
(undercurrent trip on Model 97U and
overcurrent trip on the Model 97A)
adjustments are provided to match the
current sensitive relay to a specific
application. Reset can be switch selectable for manual or automatic.
Supply Voltage:
100–140VAC, 60Hz
(240VAC available)
Start Up Time Delay:
1–6 seconds. Begins when motor
current is above 10% of current
trip point. Output is inhibited if
motor current is below 10% of
current set point.
Trip Time Delay:
Model 97U
0.5–2.5 seconds
Model 97A
0.2–2.5 seconds
Reset:
Manual or Automatic
switch selectable
Description
Fault Indicator:
LED, ON during fault
Contact Rating:
1 SPDT, 2.5 amp @
250VAC (NEMA C300)
Wire Termination:
Saddle clamp
Wire range: Two #12 to #18 gauge
Sensing Loop Wire Size:
6 gauge maximum
except 97AAF3010
2/0 gauge maximum
Operating Temperature Range:
Ҁ25°C to ѿ60°C
Set Point Repeatability:
앐2% over temperature range
of 0° to ѿ60°C
앐4% over temperature range
of Ҁ25° to 0°C
Current Transformers (Optional):
Refer to page 16-49 for Selection
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
The Class 97 current sensitive relay is a
device that monitors motor current and
provides an instantaneous output if the
motor current is over (Model 97A) or
under (Model 97U) an adjustable set
point. These over or under current conditions may be the result of a change in
system status such as a jam, broken
belt or dry well. Control voltage of 120V
AC or 240V AC is required to operate
the relay. An SPDT, 2.5 amp relay output contact is provided. No current
transformers are required below 100
amps (56 amps for undercurrent relay).
Class 97 Current Sensitive Relay
Operation
Model 97A—Overcurrent Sensitive Relay
16-50
Model 97U—Undercurrent Sensitive Relay
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Current Sensitive Relay
Class 97
Selection
Ordering Information
왘
왘
왘
For Current Transformers refer to page 16-49.
Dimensions see pages 16-108.
Wiring Diagrams see page 16-143.
Undercurrent
Reset
Type
Mounting
Control
Voltage
120VAC
Panel
Mount
240VAC
Man/
Auto
Free
Standing
120VAC
240VAC
Current
Trip Amp
Adjustment
Range
2–7
4–16
7–28
14–56
2–7
4–16
7–28
14–56
2–7
4–16
7–28
14–56
4–16
7–28
Hp Range
@ 460VAC 햲
3–71⁄ 2
5–15
10–30
20–60
3–71⁄ 2
5–15
10–30
20–60
3–71⁄ 2
5–15
10–30
20–60
5–15
10–30
Max
Continuous
Operation
Current
Catalog Number
125A
140A
140A
140A
125A
140A
140A
140A
125A
140A
140A
140A
140A
140A
97UMM0207
97UMM0416
97UMM0728
97UMM1456
97UMM0207G
97UMM0416G
97UMM0728G
97UMM1456G
97UMF0207
97UMF0416
97UMF0728
97UMF1456
97UMF0416G
97UMF0728G
Catalog Number
97AMM0207
97AMM0416
97AMM0728
97AMM1456
97AMM3010
97AMM0207G
97AMM1456G
97AMM3010G
97AMF0207
97AMF0416
97AMF0728
97AMF1456
97AMF3010
97AMF0207G
97AMF0416G
97AMF0728G
97AMF1456G
97AMF3010G
List
Price $
388.00
388.00
388.00
388.00
388.00
388.00
388.00
388.00
352.00
352.00
352.00
352.00
352.00
352.00
Overcurrent
120VAC
Panel
Mount
240VAC
Man/
Auto
Free
Standing
240VAC
햲
@ 460VAC 햲
Max
Continuous
Operation
Current
2–7
4–16
7–28
14–56
30–100
2–7
14–56
30–100
2–7
4–16
7–28
14–56
30–100
2–7
4–16
7–28
14–56
30–100
3–71⁄ 2
5–15
10–30
20–60
30–75
3–71⁄ 2
20–60
30–75
3–71⁄ 2
5–15
10–30
20–60
30–75
3–71⁄ 2
5–15
10–30
20–60
30–75
125A
140A
140A
140A
140A
125A
140A
140A
125A
140A
140A
140A
140A
125A
140A
140A
140A
140A
Hp Range
List
Price $
388.00
388.00
388.00
388.00
388.00
388.00
388.00
388.00
352.00
352.00
352.00
352.00
352.00
352.00
352.00
352.00
352.00
352.00
NEMA & General
Purpose Control
120VAC
Current
Trip Amp
Adjustment
Range
CONTROL
PRODUCTS
Mounting
Control
Voltage
16
Reset
Type
T
These catalog numbers can also be used on voltage
systems other than 460VAC by changing the Hp range
proportionally.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-51
Duplex Heavy Duty Controllers
General
Class 83
Class 84
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Features
▪ Heavy Duty NEMA Starters
▪ Solid State or Thermal Overload
Relays
▪ Fusible or MCP
▪ Heavy Duty Disconnect Handle
▪ Flexibility with Field Modifications
▪ Alternator Transfer on De-energization
▪ UL Listed for Outdoor Use and
Service Equipment File #E14900
Application
Duplex pump controls are designed to
perform one or both of two distinct
functions: duplexing and alternation. The
duplexing function provides capacity for
system peaking or above normal demand
without having the full motor capacity
spinning at all times. It also provides
standby capacity for use when one of
the motors or pumps is disabled. The
duplexing function is also referred to as
lead/lag or main/standby. When two
pumps or compressors are controlled by
a duplex controller, they are started in
sequence as necessary to attain preset
values of pressure, flow or liquid level.
Two field devices such as pressure
switches or float switches provide
electrical signals to the duplex controller.
One remote device is set to initiate the
16-52
starting of the lead motor. This motor is
rated to handle normal system demand.
The second motor is usually the same
rating and is referred to as the lag motor.
It is only energized when the system
demand is greater than the capacity of
the lead motor. The lag motor is started
when the second remote device is
signalling for more output than the
lead motor can produce.
The alternation function reverses the lead
and lag mode for the two motors in a
duplex system. Upon alternation the first
motor as described above becomes the
lag motor and the second motor
assumes the lead function. The
alternation is usually programmed to
occur at any time both pumps come to
rest. The alternation function equalizes
wear on the two machines and extends
the life of seals and bearings.
Enclosure Types
Duplex controllers are available in
NEMA 1, 12/3/3R, 4 (painted) and
4/4X (stainless) enclosures.
Enclosures protect personnel from
contact with live parts and depending
upon the construction, protect the
control in varying degrees from physical
damage and harmful atmospheres. All
enclosures are supplied with corrosion
resistant finishes.
Heavy Duty Starters
These Duplex controllers use the same
starters described in the heavy duty
starter section of this catalog.
ESP 100 solid state overload starters
and ambient compensated bimetal
overload starters are available.
Siemens Type ETI Circuit Breaker
The ETI circuit breaker is a device
designed specifically for application
in motor circuits. The ETI is a magnetic
only protective device designed to
provide protection against short
circuit current.
The instantaneous-only type ETI circuit
breaker employs adjustable magnetic
trip settings to allow broader application
ranges and a higher degree of motor
short circuit protection.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Features
Two control transformers may be
provided for low voltage control to
safeguard personnel from high voltage.
One transformer is required for each
starter to provide independent control
circuits.
A Hand-Off-Auto selector switch for each
starter may be mounted in the enclosure
door or furnished separately for remote
control. Test push buttons or pilot lights
may also be installed on the enclosure.
Solid-state or Ambient Compensated
Bimetal Overload Relays are supplied as
standard.
New Heavy Duty Disconnect
Switches
The disconnect switch that goes the
distance in durability, performance and
reliability has been made even better to
give you greater advantages:
▪ Visible blades for the highest level
of safety
▪ Double break switching action to
reduce arcing, increase lifetime and
eliminate the “electric hinge”
▪ More rugged positive action switch
▪ Oversized lugs are standard
▪ Line side shield to help guard
personnel from contact with live parts
▪ Higher horsepower rating for
design E high efficiency motors
▪ Now UL listed for IIsco, Burndy and
T&B crimp type lugs
▪ The 200A switch now accepts up to
300 MCM versus 250 MCM wire size
Its rugged construction - with a high
fault withstand rating of 100kA at 600
VAC when fused with class R rated
fuses - meets the most stringent
industry standards set forth by the
automotive, petro-chemical, and pulp
and paper industries. UL recognized and
CSA certified, our disconnect switches
are available either non-fusible or fusible
with class R and class J fuse clips.
Duplex Heavy Duty Controllers
Non - Combination, Class 83
Selection
Coil Table
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Standard coil voltage supplied will be 120V, separate control. For non-alternator styles
(see factory modifications) change the 9th character using the coil table.
Heater elements for bimetal overloads see page 16-148 (6-Required).
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-126.
Wiring Diagrams see page 16-141.
Replacement Parts see pages 16-155.
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
200–208
220–240
277
440–480
550–600
J
F
D
G
L
H
E
Non-Combination (with Solid-State Overload)
Max Hp
200
Volts
Enclosure
230
Volts
⁄
1⁄2
⁄
3⁄4
16
16
2
3
2
3
⁄
⁄
⁄
⁄
16
16
460
Volts
⁄
13
1 1⁄2
5
—
⁄
13
575
Volts
⁄
12
2
5
—
⁄
12
34
—
—
—
—
—
—
—
—
—
1 3⁄4
1 3⁄4
—
—
2 1⁄2
2 1⁄2
—
—
3 1⁄2
—
0.25-1
0.75-3
2.5-10
9-18
0.25-1
0.75-3
2.5-10
9-18
13-27
13-27
20-40
13-27
22-45
22-45
30-60
30-60
45-90
57-115
67-135
NEMA 4 Painted
NEMA 4/4X Stainless
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Catalog Number
List Price $
83CSA92BF
83CSB92BF
83CSD92BF
83CSE92BF
83DSA92BF
83DSB92BF
83DSD92BF
83DSE92BF
83DSF92BF
83ESF92BF
83ESG92BF
83FSF92BF
83FSH92BF
83GSH92BF
83GSJ92BF
83HSJ92BF
83HSK92BF
83ISL92BF
83JSM92BF
1482.00
1482.00
1482.00
1482.00
1577.00
1577.00
1577.00
1577.00
1577.00
1835.00
1835.00
2335.00
2335.00
2791.00
2791.00
3170.00
3170.00
5704.00
6392.00
Catalog Number
83CSA920F
83CSB920F
83CSD920F
83CSE920F
83DSA920F
83DSB920F
83DSD920F
83DSE920F
83DSF920F
83ESF920F
83ESG920F
83FSF920F
83FSH920F
83GSH920F
83GSJ920F
83HSJ920F
83HSK920F
83ISL920F
83JSM920F
List Price $ Catalog Number
1629.00
1629.00
1629.00
1629.00
1723.00
1723.00
1723.00
1723.00
1723.00
1981.00
1981.00
2714.00
2714.00
3282.00
3282.00
3661.00
3661.00
7331.00
8020.00
83CSA92EF
83CSB92EF
83CSD92EF
83CSE92EF
83DSA92EF
83DSB92EF
83DSD92EF
83DSE92EF
83DSF92EF
83ESF92EF
83ESG92EF
83FSF92EF
83FSH92EF
83GSH92EF
83GSJ92EF
83HSJ92EF
83HSK92EF
83ISL92EF
83JSM92EF
List Price $ Catalog Number List Price $
1956.00
1956.00
1956.00
1956.00
2067.00
2067.00
2067.00
2067.00
2067.00
2326.00
2326.00
3360.00
3360.00
4721.00
4721.00
5100.00
5100.00
8994.00
9683.00
83CSA92WF
83CSB92WF
83CSD92WF
83CSE92WF
83DSA92WF
83DSB92WF
83DSD92WF
83DSE92WF
83DSF92WF
83ESF92WF
83ESG92WF
83FSF92WF
83FSH92WF
83GSH92WF
83GSJ92WF
83HSJ92WF
83HSK92WF
83ISL92WF
83JSM92WF
3463.00
3463.00
3463.00
3463.00
3575.00
3575.00
3575.00
3575.00
3575.00
3834.00
3834.00
4868.00
4868.00
6229.00
6229.00
6967.00
6967.00
10860.00
11549.00
CONTROL
PRODUCTS
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
0
0
0
0
1
1
1
1
1
—
—
2
2
—
—
3
3
—
4
NEMA 12/3R
General Purpose
16
1 1⁄2
2
2
5
5
3
10
10
7 1⁄2 —
—
—
15
15
10
—
—
—
15
20
15
25
25
—
30
30
20
—
—
—
30
40
30
50
50
40
75
75
50
100
100
12
Overload
NEMA Half Amp
Size
Size Range
NEMA 1
Non-Combination (with Ambient Compensated Bimetal Overload)
Max Hp
Enclosure
230
Volts
460
Volts
3
7 1⁄2
10
10
15
25
30
40
3
5
7 1⁄2 10
10
15
15
25
20
30
30
50
40
75
50
100
575
Volts
5
10
15
25
30
50
75
100
NEMA Half
Size
Size
0
1
—
—
—
1 3⁄4
2
—
—
2 1⁄2
3
—
—
3 1⁄2
4
—
NEMA 12/3R
NEMA 4 Painted
NEMA 4/4X Stainless
General Purpose
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Catalog Number
List Price $
Catalog Number
83CP92BF81
83DP92BF81
83EP92BF81
83FP92BF81
83GP92BF81
83HP92BF81
83IP92BF81
83JP92BF81
1405.00
1498.00
1758.00
2256.00
2714.00
3093.00
5626.00
6315.00
83CP920F81
83DP920F81
83EP920F81
83FP920F81
83GP920F81
83HP920F81
83IP920F81
83JP920F81
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Discount Schedule NEMA
List Price $
List Price $
Catalog Number
List Price $
1877.00
1991.00
2249.00
3282.00
4643.00
5022.00
8917.00
9605.00
83CP92WF81
83DP92WF81
83EP92WF81
83FP92WF81
83GP92WF81
83HP92WF81
83IP920W81
83JP92WF81
3385.00
3498.00
3756.00
4789.00
6151.00
6888.00
10784.00
11472.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-53
1551.00
1645.00
1905.00
2636.00
3205.00
3584.00
7254.00
7943.00
Catalog Number
83CP92EF81
83DP92EF81
83EP92EF81
83FP92EF81
83GP92EF81
83HP92EF81
83IP92EF81
83JP92EF81
NEMA
12 is field convertible to NEMA 3/3R. For conduit
hubs and conversion instructions, see page 16-87.
available on standard alternator style ('92' in the
catalog number).
Not
NEMA & General
Purpose Control
200
Volts
NEMA 1
Duplex Heavy Duty Controllers
Combination Disconnect (Fusible & Non-Fusible), Class 84
Selection
Coil Table
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Standard coil voltage supplied will be 120V, separate control. For non-alternator styles (see
factory modifications) change the 10th character using the coil table.
Heater elements for bimetal overloads see page 16-148 (6-Required).
For factory installed fusible disconnect, see page 16-95.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-126.
Wiring Diagrams see page 16-141.
Replacement Parts see pages 16-155.
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
200–208
220–240
277
440–480
550–600
J
F
D
G
L
H
E
Two Disconnect Switches with Solid-State Overload
Max Hp
200
Enclosure
230
Volts Volts
⁄
⁄
2
3
1⁄6
1⁄2
2
3
7 1⁄2
⁄
⁄
2
3
1⁄6
3⁄4
2
3
7 1⁄2
16
16
CONTROL
PRODUCTS
16
12
34
NEMA 1
NEMA 12/3R
NEMA 4 Painted
NEMA 4X Stainless
General Purpose
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
460
575
NEMA
Half
Overload Disc
Amp
Amp
Volts
Volts
Size
Size
Range
Catalog
Rating Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
List
Price $
Catalog
Number
0
0
0
0
1
1
1
1
1
—
—
—
—
—
—
—
—
—
0.25-1
0.75-3
2.5-10
9-18
0.25-1
0.75-3
2.5-10
9-18
13-27
13-27
20-40
13-27
22-45
22-45
30-60
30-60
45-90
57-115
67-135
30
30
30
30
30
30
30
30
30
60
60
60
60
100
100
100
100
200
200
2335.00
2335.00
2335.00
2335.00
2430.00
2430.00
2430.00
2430.00
2430.00
2688.00
2688.00
3489.00
3489.00
5022.00
5022.00
5401.00
5401.00
9166.00
9855.00
84CSA920DF
84CSB920DF
84CSD920DF
84CSE920DF
84DSA920DF
84DSB920DF
84DSD920DF
84DSE920DF
84DSF920DF
84ESF920DF
84ESG920DF
84FSF920DF
84FSH920DF
84GSH920DF
84GSJ920DF
84HSJ920DF
84HSK920DF
84ISL920DF
84JSM920DF
2791.00
2791.00
2791.00
2791.00
2886.00
2886.00
2886.00
2886.00
2886.00
3145.00
3145.00
4135.00
4135.00
5859.00
5859.00
6238.00
6238.00
11483.00
12174.00
84CSA92EDF
84CSB92EDF
84CSD92EDF
84CSE92EDF
84DSA92EDF
84DSB92EDF
84DSD92EDF
84DSE92EDF
84DSF92EDF
84ESF92EDF
84ESG92EDF
84FSF92EDF
84FSH92EDF
84GSH92EDF
84GSJ92EDF
84HSJ92EDF
84HSK92EDF
84ISL92EDF
84JSM92EDF
4152.00
4152.00
4152.00
4152.00
4247.00
4247.00
4247.00
4247.00
4247.00
4506.00
4506.00
6298.00
6298.00
9915.00
9915.00
10294.00
10294.00
15420.00
16109.00
84CSA92WDF
84CSB92WDF
84CSD92WDF
84CSE92WDF
84DSA92WDF
84DSB92WDF
84DSD92WDF
84DSE92WDF
84DSF92WDF
84ESF92WDF
84ESG92WDF
84FSF92WDF
84FSH92WDF
84GSH92WDF
84GSJ92WDF
84HSJ92WDF
84HSK92WDF
84ISL92WDF
84JSM92WDF
1⁄3
1 1⁄2
5
1⁄2
2
5
—
—
⁄
1 1⁄2
5
10
1⁄2
2
5
10
13
—
—
—
—
15
15
10
10
—
—
—
—
10
15
20
25
30
—
—
15
25
30
15
20
—
—
—
—
25
30
40
30
40
50
30
50
75
100
40
50
75
100
—
—
2
2
1 3⁄4
1 3⁄4
—
—
—
—
3
3
2 1⁄2
2 1⁄2
—
—
—
4
3 1⁄2
—
84CSA92BDF
84CSB92BDF
84CSD92BDF
84CSE92BDF
84DSA92BDF
84DSB92BDF
84DSD92BDF
84DSE92BDF
84DSF92BDF
84ESF92BDF
84ESG92BDF
84FSF92BDF
84FSH92BDF
84GSH92BDF
84GSJ92BDF
84HSJ92BDF
84HSK92BDF
84ISL92BDF
84JSM92BDF
List
Price $
5660.00
5660.00
5660.00
5660.00
5754.00
5754.00
5754.00
5754.00
5754.00
6013.00
6013.00
7806.00
7806.00
11423.00
11423.00
12161.00
12161.00
17287.00
17976.00
Two Disconnect Switches with Ambient Compensated Bimetal Overload
NEMA & General
Purpose Control
Max Hp
Enclosure
200
Volts
230
Volts
460
Volts
3
7 1⁄2
10
10
15
25
30
40
3
5
7 1⁄2 10
10
15
15
25
20
30
30
50
40
75
50
100
575
Volts
5
10
15
25
30
50
75
100
NEMA Half
Size
Size
0
1
—
—
—
1 3⁄4
2
—
—
2 1⁄2
3
—
—
3 ⁄
4
—
12
NEMA 12/3R
NEMA 4 Painted
NEMA 4/4X Stainless
General Purpose
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Disc
Amp
Range Catalog Number
30
30
60
60
100
100
200
200
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
16-54
NEMA 1
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
List Price $
84CP92BDF81
84DP92BDF81
84EP92BDF81
84FP92BDF81
2327.00
2352.00
2610.00
3411.00
84CP920DF81
84DP920DF81
84EP920DF81
84FP920DF81
2714.00
2809.00
3067.00
4058.00
84CP92EDF81
84DP92EDF81
84EP92EDF81
84FP92EDF81
4075.00
4170.00
4428.00
6220.00
84CP92WDF81
84DP92WDF81
84EP92WDF81
84FP92WDF81
5582.00
5677.00
5936.00
7727.00
84GP92BDF81
84HP92BDF81
84IP92BDF81
84JP92BDF81
4944.00
5324.00
9089.00
9778.00
84GP920DF81
84HP920DF81
84IP920DF81
84JP920DF81
5780.00
6159.00
11406.00
12095.00
84GP92EDF81
84HP92EDF81
84IP92EDF81
84JP92EDF81
9838.00
10218.00
15344.00
16032.00
84GP92WDF81
84HP92WDF81
84IP92WDF81
84JP92WDF81
11345.00
12083.00
17210.00
17898.00
NEMA
12 is field convertible to NEMA 3/3R. For conduit
hubs and conversion instructions, see page 16-87.
available on standard alternator style
('92' in the catalog number).
Not
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Duplex Heavy Duty Controllers
Combination Circuit Breaker, Class 84
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Coil Table
Standard coil voltage supplied will be 120V, separate control. For non-alternator styles (see
factory modifications) change the 10th character using the coil table.
Heater elements for bimetal overloads see page 16-148 (6-Required).
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-126.
Wiring Diagrams see page 16-141.
Replacement Parts see pages 16-155.
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
200–208
220–240
277
440–480
550–600
J
F
D
G
L
H
E
2 Motor Circuit Protectors (with Solid-State Overload)
Max Hp
Enclosure
Overload
200 230 460 575 NEMA Half Amp
Volts Volts Volts Volts Size Size Range
⁄
⁄
⁄
⁄
16
16
12
34
1⁄3
1⁄2
1 1⁄2 2
5
5
⁄
1⁄2
2
3
7 1⁄2
⁄
3⁄4
2
3
7 1⁄2
1⁄2
1 1⁄2 2
5
5
10 10
—
—
15
15
10
10
—
—
—
—
10
15
—
—
15
25
30
20
25
30
15
20
—
—
—
—
25
30
40
30
40
50
30
50
75
100
40
50
75
100
16
—
16
—
⁄
13
—
—
—
—
1 3⁄4
1 3⁄4
2
2
—
—
—
—
2 1⁄2
2 1⁄2
3
3
—
—
—
3 1⁄2
4
—
0.25-1
0.75-3
2.5-10
9-18
0.25-1
0.75-3
2.5-10
9-18
13-27
13-27
20-40
13-27
22-45
22-45
30-60
30-60
45-90
57-115
67-135
NEMA 4 Painted
NEMA 4/4X Stainless
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Motor
Circuit
Interrupter Catalog
Number
ETI
3
3
10
25
3
3
10
25
30
40
50
40
50
50
100
50
100
125
150
84CSA92BMF
84CSB92BMF
84CSD92BMF
84CSE92BMF
84DSA92BMF
84DSB92BMF
84DSD92BMF
84DSE92BMF
84DSF92BMF
84ESF92BMF
84ESG92BMF
84FSF92BMF
84FSH92BMF
84GSH92BMF
84GSJ92BMF
84HSJ92BMF
84HSK92BMF
84ISL92BMF
84JSM92BMF
List
Price $
3015.00
3015.00
3015.00
3015.00
3110.00
3110.00
3110.00
3110.00
3110.00
3378.00
3378.00
4152.00
4152.00
5384.00
5384.00
5763.00
5763.00
11234.00
11923.00
Catalog
Number
84CSA920MF
84CSB920MF
84CSD920MF
84CSE920MF
84DSA920MF
84DSB920MF
84DSD920MF
84DSE920MF
84DSF920MF
84ESF920MF
84ESG920MF
84FSF920MF
84FSH920MF
84GSH920MF
84GSJ920MF
84HSJ920MF
84HSK920MF
84ISL920MF
84JSM920MF
List
Price $
3472.00
3472.00
3472.00
3472.00
3566.00
3566.00
3566.00
3566.00
3566.00
3825.00
3825.00
4798.00
4798.00
6220.00
6220.00
6599.00
6599.00
13543.00
14232.00
Catalog
Number
84CSA92EMF
84CSB92EMF
84CSD92EMF
84CSE92EMF
84DSA92EMF
84DSB92EMF
84DSD92EMF
84DSE92EMF
84DSF92EMF
84ESF92EMF
84ESG92EMF
84FSF92EMF
84FSH92EMF
84GSH92EMF
84GSJ92EMF
84HSJ92EMF
84HSK92EMF
84ISL92EMF
84JSM92EMF
List
Price $
4833.00
4833.00
4833.00
4833.00
4928.00
4928.00
4928.00
4928.00
4928.00
5186.00
5186.00
6962.00
6962.00
10277.00
10277.00
10656.00
10656.00
17489.00
18178.00
Catalog
Number
List
Price $
84CSA92WMF
84CSB92WMF
84CSD92WMF
84CSE92WMF
84DSA92WMF
84DSB92WMF
84DSD92WMF
84DSE92WMF
84DSF92WMF
84ESF92WMF
84ESG92WMF
84FSF92WMF
84FSH92WMF
84GSH92WMF
84GSJ92WMF
84HSJ92WMF
84HSK92WMF
84ISL92WMF
84JSM92WMF
6341.00
6341.00
6341.00
6341.00
6435.00
6435.00
6435.00
6435.00
6435.00
6694.00
6694.00
8468.00
8468.00
11785.00
11785.00
12523.00
12523.00
19355.00
20043.00
CONTROL
PRODUCTS
2
3
—
—
—
—
—
—
—
—
—
NEMA 12/3R
General Purpose
16
2
3
0
0
0
0
1
1
1
1
1
NEMA 1
2 Motor Circuit Protectors (with Ambient Compensated Bimetal Overload)
Max Hp
Enclosure
⁄
2
3
1⁄2
2
3
7 1⁄2
—
10
—
10
—
15
—
25
30
40
12
⁄
34
2
3
3⁄4
2
3
7 1⁄2
—
10
—
15
—
20
—
30
40
50
1 1⁄2
2
5
5
—
—
1 1⁄2
2
5
5
10
10
—
—
15
15
—
—
15
20
25
25
30
30
—
—
30
40
50
50
75
75
100 100
0
0
0
1
1
1
1
—
—
2
2
—
—
3
3
—
4
—
—
—
—
—
—
—
1 3⁄4
1 3⁄4
—
—
2 1⁄2
2 1⁄2
—
—
3 1⁄2
—
3
10
25
3
10
25
30
40
50
40
50
50
100
50
100
125
150
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Discount Schedule NEMA
NEMA 12/3R
NEMA 4 Painted
NEMA 4/4X Stainless
General Purpose
Industrial Use
Weatherproof
Watertight
Dust-tight
Watertight, Dust-tight
Corrosion Resistant
304 Stainless Steel
Catalog
Number
List
Price $
84CPB92BMF81 2938.00
84CPD92BMF81 2938.00
84CPE92BMF81 2938.00
84DPB92BMF81 3032.00
84DPD92BMF81 3032.00
84DPE92BMF81 3032.00
84DPF92BMF81 3032.00
84EPF92BMF81 3291.00
84EPG92BMF81 3291.00
84FPF92BMF81 4075.00
84FPH92BMF81 4075.00
84GPH92BMF81 5307.00
84GPJ92BMF81 5307.00
84HPJ92BMF81 5687.00
84HPK92BMF81 5687.00
84IPL92BMF81 11157.00
84JPM92BMF81 11846.00
Catalog
Number
List
Price $
Catalog
Number
84CPB920MF81 3394.00 84CPB92EMF81
84CPD920MF81 3394.00 84CPD92EMF81
84CPE920MF81 3394.00 84CPE92EMF81
84DPB920MF81 3489.00 84DPB92EMF81
84DPD920MF81 3489.00 84DPD92EMF81
84DPE920MF81 3489.00 84DPE92EMF81
84DPF920MF81 3489.00 84DPF92EMF81
84EPF920MF81 3747.00 84EPF92EMF81
84EPG920MF81 3747.00 84EPG92EMF81
84FPF920MF81 4721.00 84FPF92EMF81
84FPH920MF81 4721.00 84FPH92EMF81
84GPH920MF81 6142.00 84GPH92EMF81
84GPJ920MF81 6142.00 84GPJ92EMF81
84HPJ920MF81 6522.00 84HPJ92EMF81
84HPK920MF81 6522.00 84HPK92EMF81
84IPL920MF81 13465.00 84IPL92EMF81
84JPM920MF81 14155.00 84JPM92EMF81
List
Price $
4755.00
4755.00
4755.00
4850.00
4850.00
4850.00
4850.00
5108.00
5108.00
6883.00
6883.00
10201.00
10201.00
10580.00
10580.00
17411.00
18100.00
Catalog
Number
List
Price $
84CPB92WMF81
84CPD92WMF81
84CPE92WMF81
84DPB92WMF81
84DPD92WMF81
84DPE92WMF81
84DPF92WMF81
84EPF92WMF81
84EPG92WMF81
84FPF92WMF81
84FPH92WMF81
84GPH92WMF81
84GPJ92WMF81
84HPJ92WMF81
84HPK92WMF81
84IPL92WMF81
84JPM92WMF81
6263.00
6263.00
6263.00
6358.00
6358.00
6358.00
6358.00
6616.00
6616.00
8391.00
8391.00
11709.00
11709.00
12446.00
12446.00
19278.00
19967.00
NEMA
12 is field convertible to NEMA 3/3R. For conduit
hubs and conversion instructions, see page 16-87.
Not available on standard alternator style
('92' in the catalog number).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-55
NEMA & General
Purpose Control
200 230
460
575
NEMA Half
Volts Volts Volts Volts Size
Size
Motor
Circuit
Interrupter
ETI
NEMA 1
Pump Control Panels
Class 87, 88
General
Application
Features
▪ Fully Gasketed NEMA 3R Rainproof
Enclosures
▪ 100,000 Amp Interrupting Capacity
with Class R Fuses
▪ Heavy Duty NEMA Starters
▪ Solid State or Ambient Compensated
Bimetal Overload Relays
▪ Heavy Duty Disconnect Handle
▪ Available in Reduced Voltage Versions
▪ Bold Pilot Legend on Front
▪ Generous Accessory Space
▪ Copper Grounding Lug For Three
#6 Wires
▪ UL Listed for Outdoor Use and
Service Equipment File #E14900
Heavy duty pump control panels are
designed to withstand the most
demanding environments. Typical
applications include irrigation, agriculture,
petrochemical, wastewater treatment
and wherever motor control is
challenged by harsh elements.
Rugged pump control panels utilized
cold forming “tox” process. They are
more rainproof, sleet and ice
resistant than in the past.
Installation is easy. Panels are factory
wired to provide flexible control and
protect against short circuits and
overloads. Ample space is provided
for field modifications and installation
of accessories.
The pump control panels feature a full
sized removable auxiliary panel for the
mounting of accessories. The fusible
version features fuse clips for full sized
RK5 or compact class J fuses and
accessory mounting space for the
most commonly used accessories.
Class 87 pump panels become jockey
pump panels with the addition of a
pressure switch. The jockey pump’s
primary function is to maintain water
pressure at a preset level and thus
compensate for possible shortage of
water in the pumping system. When the
water pressure drops below the preset
level, the pressure switch energizes the
starter which in turn activates the jockey
pump. The water pressure is then
brought back up to the desired level. This
insures the maintenance of proper water
pressure at all times.
Specified by Fortune 500 companies,
ESP100 or thermal starters offer
prolonged service under severe duty
conditions. NEMA rated, these starters
utilize large silver cadmium oxide
contacts and wide copper heat sinks
to ensure rapid heat dissipation and
maximum electrical life.
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Features
16-56
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
ESP100 solid state overload
relays provide phase loss protection
for the motor by tripping within three
seconds upon complete loss of one
phase in a three phase circuit. Each
overload has a 2:1 (4:1 in lower ranges)
FLA adjustment range with an
adjustment dial reading out in FLA.
This feature allows for extreme fine
tuning. Their heaterless construction
minimizes energy costs and costs of
cabinet ventilation or cooling. The class
87 pump panel comes with class 10
trip standard.
The ambient compensated bimetal
overload relays are designed to
parallel thermal characteristics of typical
pump motors. They prevent nuisance
trips that may result from operation of
the control in a higher ambient temperature than that at the pump. These relays
are trip-free, tamperproof and can be set
to reset automatically or manually.
HOA and Start Pushbutton
Every pump panel comes with an HOA
and a start pushbutton.
Half Size Starters
Siemens motor matched starters feature
all the rugged performance characteristics
of our NEMA rated starter sizes, but are
fractionally sized to more closely match
your exact motor rating. As a result,
significant economic savings are made
possible without sacrificing the reliability
you expect from a heavy duty starter.
These additional starter sizes have the
reserve capacity to handle occasional
plugging and jogging without de-rating
the device.
Siemens motor matched can save hundreds,
even thousands of dollars per project.
Siemens motor matched starters comply
with NEMA, UL and CSA standards.
Pump Control Panels
Class 87, 88
General
Safety Disconnect Handle
Up to three padlocks can be used to lock
the disconnect in the OFF position.
Maintenance work can be performed
without hazard to personnel.
External Reset
The overload relay may be quickly reset
by means of a button on the front of the
enclosure.
Bold Pilot Legend
Provides positive indication of the
selector switch position for use to
stop the pump motor.
Ground Lugs
Insures proper connecting of ground
wires and lightning arresters.
UL Listed
Assures proper construction throughout
control panel.
Reduced Voltage
Available in part winding, wye delta and
auto transformer types, these controls
may be necessary where the power
company limits the amount of current
drawn from its lines, or where starting
torque must be reduced.
Fully gasketed NEMA 3/12 weatherproof enclosures are supplied with
Class 88 reduced voltage starters.
16-57
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
CONTROL
PRODUCTS
Part Winding Starters apply starting
current in timed steps to minimize
voltage fluctuations.
Auto Transformer Starters maintain
a closed circuit during transition and
eliminate voltage or current surges.
They draw less current than part winding
starters and are well suited for starting
motors over 20 Hp.
Wye Delta starters and motors are
used in areas where the power supply is
inadequate to supply full starting current
without objectionable voltage drop or for
applications where low starting torque is
required. Centrifugal pumps and similar
apparatus requiring a low starting torque
are typical applications. Both ends of all
three windings of the wye delta motor
are brought out so that they may be
accessible for reconnecting from wye
to delta.
Auxiliary Equipment
Pilot Lights are easily installed on the
enclosure. Oil Tight and Heavy Duty, they
meet NEMA A600 requirements.
Lightning Arresters protect the control panel from lightning induced surges.
Undervoltage and Phase Sensing
Relays protect the pump against low
voltage, voltage imbalance, loss of phase
and phase reversal.
Anti-Backspin Timers prevent the
motor from starting during motor/shaft
backspin.
The TOX Box
Siemens uses the TOX process to
manufacture the enclosures for the
pump panels.
Advantages of the TOX process:
▪ Joints are 50-70% stronger
▪ Since the TOX process compresses
the metal at the joint, it does not
leave the high stresses in the metal
▪ Increased corrosion resistance.
The protective layer on the metal is
not damaged in the process, but
instead flows with the material
Class 87 NEMA Vacuum Starter
Pump Control Panels
The Siemens vacuum starter pump
controllers are designed for the harshest
environments. Typical environments
include chemical, petrochemical, waste
water treatment and mining.
Contaminations present in these
severe environments are detrimental
to conventional air-break contacts
decreasing their life expectancy and
reliability. The Siemens vacuum starter
pump controllers are well suited for
these environments because the
contacts are contained in hermetically
sealed contact tubes. This prevents
contaminates in the atmosphere from
affecting the operation of the contacts.
Additionally, neither arcs nor arcing
gases are produced which dramatically
increases the electrical endurance of
the contacts.
16
Panels are predrilled for easy repositioning
of the fuse trailer block to accommodate
250 and 600 volt fuses and full sized RK
or compact J fuses. Circuit breakers are
also available.
New Heavy Duty Fusible
Disconnect Switch
The disconnect switch has been
made even better to give you greater
advantages:
▪ Visible blades for the highest
level of safety
▪ Double Break Switching Action
to reduce arcing, increase lifetime
and eliminate the “electric hinge”
▪ Oversized lugs are standard
▪ Line side shield to help guard
personnel from contact with live parts
Motor Circuit Protector
The motor circuit protector provides fast,
accurate fault clearing that will minimize
damage to the motor and control
apparatus and protect branch circuit
conductors. Continuous current ratings
and adjustable trip ranges meet NEC
requirements for full load and locked
rotor currents. The adjustable
instantaneous trip point can be set
precisely to assure fault protection
and eliminate nuisance tripping.
Removable Door
Enclosure door may be lifted off to make
wiring easier.
Mounting Flanges
Convenient flanges at top and bottom
of the enclosure provide easy mounting.
They fit pole or flat surfaces using
keyhole slots.
Quarter Turn Latches
Quarter turns are utilized to secure the
door.
Wind Catches
A wind catch is provided to prevent the
door from slamming shut (or open) due
to high wind conditions.
Pump Control Panels
Standard Pump Panel with Solid State Overload, Class 87
Selection
Coil Table
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-127.
Wiring Diagrams see page 16-143.
Replacement Parts see pages 16-155.
Sizes 1-4 will be supplied standard with a 240/480 volt coil. To change the coil voltage,
change the 8th character in the catalog number to the letter shown in the coil table.
Sizes 5 & 6 will be supplied standard with a 480 volt coil. To change the coil voltage, change
the 8th character in the catalog number to the letter shown in the coil table.
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
220–240/440–480
277
440–480
550–600
J
F
A
D
G
C
L
H
E
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Fusible Disconnect
Max HP
200V 230V
460V
575V
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1
5
7 1⁄2
7 1⁄2
15
15
15
25
25
30
30
50
50
75
100
200
250
1
5
10
10
15
15
20
25
25
30
30
50
50
75
100
200
2
3
7 1⁄2
7 1⁄2
10
10
10
15
15
25
25
30
40
75
2
3
7 1⁄2
7 1⁄2
10
15
15
20
20
30
30
40
50
100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
NEMA Size
Half Size
1
1
1
1
—
—
—
—
—
—
1 3⁄4
1 3⁄4
2
2
2
—
—
—
—
—
2 1⁄2
2 1⁄2
3
3
—
—
—
3 1⁄2
4
5
6
1
1
1
1
—
—
—
—
—
—
—
—
1 3⁄4
2
2
—
—
—
—
2 1⁄2
2 1⁄2
3
3
—
—
—
3 1⁄2
4
5
—
—
Overload
Amp Range
Disc
Amp Rating
0.75-3
2.5-10
9-18
9-18
13-27
13-27
13-27
22-45
22-45
22-45
22-45
45-90
45-90
57-115
67-135
100-270
200-540
2.5-10
9-18
13-27
13-27
20-40
22-45
22-45
30-60
30-60
45-90
45-90
57-115
67-135
55-250
30
30
30
60
30
60
60
60
100
60
100
100
200
200
200
400
600
30
30
30
60
60
60
100
60
100
100
200
200
200
400
Fuse Clip
Amps/Volts
Catalog Number
30A/600V
30A/600V
30A/600V
60A/600V
30A/600V
60A/600V
60A/600V
60A/600V
100A/600V
60A/600V
100A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
600A/600V
30A/250V
30A/250V
30A/250V
60A/250V
60A/250V
60A/250V
100A/250V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
87DSB6FC
87DSD6FC
87DSE6FC
87DSE60C
87ESF6FC
87ESF60C
87FSF6FC
87FSH6FC
87FSH60C
87GSH6FC
87GSH60C
87HSK6FC
87HSK60C
87ISL6FC
87JSM6FC
87KSU6FH
87MSW6FH
87DSD6LC
87DSE6LC
87DSF6LC
87DSF6PC
87ESG6LC
87FSH6LC
87FSH6PC
87GSJ6LC
87GSJ6PC
87HSK6LC
87HSK6PC
87ISL6LC
87JSM6LC
87KSU6LH
Catalog Number
List Price $
87DSB6MC
87DSC6MC
87DSD6MC
87DSE6MC
87DSF6MC
87ESF6MC
87ESG6MC
87FSF6MC
87FSH6MC
87GSH6MC
87GSJ6MC
87HSK6MC
87ISL6MC
87JSM6MC
87KST6MH
87KSU6MH
87MSW6MH
87MSX6MH
1430.00
1430.00
1430.00
1430.00
1430.00
1602.00
1602.00
1774.00
1774.00
2317.00
2317.00
2507.00
4962.00
5307.00
12070.00
12070.00
26168.00
30084.00
List Price $
1137.00
1137.00
1137.00
1154.00
1336.00
1353.00
1533.00
1533.00
1629.00
2188.00
2284.00
2473.00
2653.00
4204.00
4549.00
9890.00
24970.00
1120.00
1120.00
1120.00
1137.00
1336.00
1508.00
1612.00
2128.00
2231.00
2421.00
2619.00
4170.00
4514.00
9683.00
Circuit Breaker
Max HP
200V
230V
460V
575V
NEMA Size
1/2
1
2
3
7 1⁄2
1/2
1
2
3
7 1⁄2
1
3
5
10
1
1
1
1
1
—
—
—
—
—
—
—
1
3
5
7 1⁄2
10
15
10
10
—
—
—
—
1 3⁄4
1 3⁄4
—
—
10
15
—
—
—
20
25
30
2
2
—
15
25
30
15
25
30
40
50
75
100
150
20
30
40
50
75
100
125
200
—
—
—
—
2 1⁄2
2 1⁄2
50
75
100
150
200
250
400
50
75
100
200
200
300
400
—
15
3
—
—
3 1⁄2
4
5
5
6
6
—
—
—
—
—
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
16-58
Half Size
Overload
Amp Range
0.75-3
2.5-10
2.5-10
9-18
13-27
13-27
20-40
13-27
22-45
22-45
30-60
45-90
57-115
67-135
55-250
55-250
160-540
160-540
Not
Motor Circuit
Interrupter
ETI Amps
3
10
10
25
30
40
50
40
50
50
100
100
125
150
250
400
400
600
available on Size 5 and larger.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
For
an overload amp range of 0.25-1A, change the 5th
character from a ‘B’ to an ‘A’.
Discount Schedule NEMA
Pump Control Panels
Pump Panel with Ambient Compensated Bimetal Overload, Class 87
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil Table
Heater elements for bimetal overloads see page 16-148 (6-Required).
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-127.
Wiring Diagrams see page 16-143.
Replacement Parts see pages 16-155.
Sizes 1-4 will be supplied standard with a 230/480 volt coil. To change the coil
voltage, change the 8th character in the catalog number to the letter shown in
the coil table.
Sizes 5 & 6 will be supplied standard with a 480 volt coil. To change the coil
voltage, change the 8th character in the catalog number to the letter shown
in the coil table.
60Hz Voltage
Letter
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
220–240/440–480
277
440–480
550–600
J
F
A
D
G
C
L
H
E
Fusible Disconnect
460V
575V
NEMA Size
Half Size
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
10
10
15
15
25
25
30
30
50
50
75
100
10
10
15
15
25
25
30
30
50
50
75
100
1
1
—
—
—
—
1 3⁄4
1 3⁄4
2
2
—
—
—
—
2 1⁄2
2 1⁄2
3
3
—
—
—
3 1⁄2
7 1⁄2
7 1⁄2
10
10
10
15
25
25
30
40
7 1⁄2
7 1⁄2
10
15
15
20
30
30
40
50
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4
1
1
—
—
—
—
1 3⁄4
2
2
—
—
—
2 1⁄2
3
3
—
—
—
3 1⁄2
4
—
Disc
Amp Rating
30
60
30
60
60
100
60
100
100
200
200
200
30
60
60
60
100
100
100
200
200
200
Fuse Clip
Amps/Volts
Catalog Number
30A/600V
60A/600V
30A/600V
60A/600V
60A/600V
100A/600V
60A/600V
100A/600V
100A/600V
200A/600V
200A/600V
200A/600V
30A/250V
60A/250V
60A/250V
60A/250V
100A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
87DAE6FC
87DAE60C
87EAF6FC
87EAF60C
87FAJ6FC
87FAJ60C
87GAK6FC
87GAK60C
87HAN6FC
87HAN60C
87IAP6FC
87JAR6FC
87DAE6LC
87DAE6PC
87EAG6LC
87FAJ6LC
87FAJ6PC
87GAL6LC
87HAN6LC
87HAN6PC
87IAP6LC
87JAR6LC
Catalog Number
List Price $
List Price $
1098.00
1116.00
1296.00
1314.00
1495.00
1589.00
2149.00
2244.00
2433.00
2614.00
4165.00
4510.00
1082.00
1098.00
1296.00
1469.00
1572.00
2192.00
2381.00
2580.00
4131.00
4475.00
CONTROL
PRODUCTS
230V
16
Max HP
200V
Circuit Breaker
200V
230V
460V
575V
NEMA Size
Half Size
⁄
1
3
7 1⁄2
7 1⁄2
10
12
⁄
1
3
7 1⁄2
7 1⁄2
10
1
3
7 1⁄2
10
15
1
3
7 1⁄2
10
15
1
1
1
1
—
—
—
—
—
—
—
—
1 3⁄4
1 3⁄4
15
25
30
20
25
30
2
2
—
—
—
—
—
—
2 1⁄2
2 1⁄2
50
75
100
50
75
100
12
—
—
10
15
—
—
15
25
30
40
20
30
40
50
3
—
—
3 1⁄2
4
—
Note: Hp’s shown above are based on the overload
amp range for the FLA’s (per the National Electric
Code) of typical industrial motors. All starter sizes
carry one maximum Hp rating.
Discount Schedule NEMA
Not
Motor Circuit
Interrupter
ETI Amps
3
10
25
30
40
50
40
50
50
100
100
125
150
87DAA6MC
87DAB6MC
87DAD6MC
87DAE6MC
87EAF6MC
87EAG6MC
87FAH6MC
87FAJ6MC
87GAK6MC
87GAL6MC
87HAN6MC
87IAP6MC
87JAR6MC
NEMA & General
Purpose Control
Max HP
1391.00
1391.00
1391.00
1391.00
1563.00
1720.00
1736.00
1736.00
2278.00
2278.00
2468.00
4923.00
5268.00
available on Size 5 or above.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-59
Reduced Voltage Pump Panels
Auto Transformer & Part winding (2 Step) with Solid State Overload, Class 88
Coil and Control Voltage
Ordering Information
䊳
䊳
䊳
䊳
䊳
Selection
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-127.
Wiring Diagrams see page 16-143.
Replacement Parts see pages 16-155.
The coil voltage on the contactors will be
the motor voltage. A CPT will be supplied
to provide the control voltage. The control
voltage will be 120V.
To change the control voltage to customer
supplied (no CPT included), change the
9th character to the following:
for 24V , use ”J”
for 120V, use ”F”
Auto Transformer Type
Fusible Disconnect
Motor
Max
Voltage Hp
230
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
460
15
20
30
40
50
75
100
200
25
30
50
75
100
150
200
400
OL amp
range
NEMA Half
Size
Size
Fuse Clip Size
Amps/Volts
22-45
30-60
45-90
57-115
67-135
100-210
100-270
200-540
22-45
22-45
45-90
57-115
67-135
55-250
55-250
160-540
2
—
—
2 1⁄2
3
—
—
3 1⁄2
4
5
5
6
2
—
—
—
—
—
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
—
400A/250V
—
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
—
400A/600V
600A/600V
—
2 1⁄2
3
—
—
3 1⁄2
4
5
5
6
—
—
—
—
Circuit Breaker
Catalog Number
List
Price $
Circuit Breaker
Amps
Catalog Number
List
Price $
88FSHT2FG
88GSJT2FG
88HSKT2FG
88ISLT2FG
88JSMT2FG
—
88KSUT2FG
—
88FSHT4FH
88GSHT4FH
88HSKT4FH
88ISLT4FH
88JSMT4FH
—
88KSUT4FH
88MSXT4FH
7159.00
9683.00
10334.00
14680.00
15506.00
—
26853.00
—
7634.00
10045.00
10700.00
15179.00
16936.00
—
29592.00
43290.00
50
100
100
125
150
250
400
600
50
50
100
125
150
250
400
600
88FSHT2MG
88GSJT2MG
88HSKT2MG
88ISLT2MG
88JSMT2MG
88KSST2MG
88KSUT2MG
88MSXT2MH
88FSHT4MH
88GSHT4MH
88HSKT4MH
88ISLT4MH
88JSMT4MH
88KSST4MH
88KSUT4MH
88MSXT4MH
7254.00
9880.00
11320.00
16213.00
17042.00
26740.00
28706.00
48033.00
7757.00
10144.00
11230.00
16412.00
17446.00
27464.00
31032.00
48029.00
Part Winding 2 Step
Fusible Disconnect
Motor
Max
Voltage Hp
OL amp
range
230
20-40
22-45
30-60
45-90
57-115
67-135
100-210
100-270
13-27
22-45
30-60
30-60
57-115
67-135
55-250
55-250
460
20
25
40
50
60
75
125
150
30
40
60
75
100
150
250
350
NEMA
Size
Half
Size
Fuse Clip Size
Amps/Volts
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
—
600A/250V
100A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
—
600A/600V
—
1 3⁄4
2
—
—
2 1⁄2
3
—
—
3 1⁄2
4
5
5
—
—
—
—
1 3⁄4
2
—
—
2 1⁄2
3
—
—
3 1⁄2
4
5
5
—
—
—
Circuit Breaker
Catalog Number
List
Price $
Circuit Breaker
Amps
Catalog Number
List
Price $
88ESGP2FG
88FSHP2FG
88GSJP2FG
88HSKP2FG
88ISLP2FG
88JSMP2FG
—
88KSUP2FG
88ESFP4FH
88FSHP4FH
88GSJP4FH
88HSJP4FH
88ISLP4FH
88JSMP4FH
—
88KSUP4FH
4282.00
4635.00
6548.00
7099.00
12578.00
13276.00
—
25672.00
4282.00
4635.00
6548.00
7099.00
12578.00
13276.00
—
25672.00
100
100
100
150
250
250
400
600
50
100
100
125
150
250
400
600
88ESGP2MG
88FSHP2MG
88GSJP2MG
88HSKP2MG
88ISLP2MG
88JSMP2MG
88KSSP2MG
88KSUP2MG
88ESFP4MH
88FSHP4MH
88GSJP4MH
88HSJP4MH
88ISLP4MH
88JSMP4MH
88KSSP4MH
88KSUP4MH
4014.00
4489.00
6376.00
6927.00
13543.00
14232.00
25078.00
26285.00
4014.00
4489.00
6376.00
6927.00
13543.00
14232.00
26285.00
47288.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-60
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Reduced Voltage Pump Panels
Wye Delta with Solid State Overload, Class 88
Selection
Coil and Control Voltage
Ordering Information
䊳
䊳
䊳
䊳
䊳
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-127.
Wiring Diagrams see page 16-143.
Replacement Parts see pages 16-155.
The coil voltage on the contactors will be
the motor voltage. A CPT will be supplied
to provide the control voltage. The control
voltage will be 120V.
To change the control voltage to customer
supplied (no CPT included), change the
9th character to the following:
for 24V , use ”J”
for 120V, use ”F”
Wye Delta
Open Transition
Fusible Disconnect
Motor
NEMA
Voltage Max Hp Size
200V
230V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
400A/250V
600A/250V
—
60A/250V
60A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
400A/250V
600A/250V
—
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
—
60A/600V
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
—
50
100
100
125
150
250
250
400
600
800
50
50
100
100
150
250
250
400
600
1200
30
50
100
100
125
150
250
400
600
1200
30
50
50
100
125
150
250
400
400
1200
88DSF06FD
88ESG06FD
88FSH06FD
88GSJ06FD
88HSK06FD
88ISL06FD
88ISL06FD
88KSS06FD
88KSU06FD
—
88DSF02FG
88ESG02FG
88FSH02FG
88GSJ02FG
88HSK02FG
88ISL02FG
88JSM02FG
88KSS02FG
88KSU02FG
—
88DSE04FH
88ESF04FH
88FSH04FH
88GSJ04FH
88HSK04FH
88ISL04FH
88JSM04FH
88KSS04FH
88KSU04FH
—
88DSE05FE
88ESF05FE
88FSF05FE
88GSH05FE
88HSJ05FE
88ISK05FE
88JSM05FE
88KSS05FE
88KSU05FE
—
5384.00
6048.00
6892.00
8640.00
9304.00
16351.00
16351.00
25506.00
30833.00
—
5384.00
5952.00
6892.00
8640.00
9304.00
16351.00
16953.00
25506.00
30833.00
—
5384.00
5970.00
6548.00
8296.00
8296.00
14232.00
16953.00
25506.00
30833.00
—
5384.00
5970.00
6548.00
8296.00
9304.00
14232.00
14232.00
25506.00
30833.00
—
Catalog
Number
88DSF06MD
88ESG06MD
88FSH06MD
88GSJ06MD
88HSK06MD
88ISL06MD
88JSM06MD
88KSS06MD
88KSU06MD
88MSX06MD
88DSF02MG
88ESG02MG
88FSH02MG
88GSJ02MG
88HSK02MG
88ISL02MG
88JSM02MG
88KSS02MG
88KSU02MG
88MSX02MG
88DSE04MH
88ESF04MH
88FSH04MH
88GSJ04MH
88HSK04MH
88ISL04MH
88JSM04MH
88KSS04MH
88KSU04MH
88MSX04MH
88DSE05ME
88ESF05ME
88FSF05ME
88GSH05ME
88HSJ05ME
88ISK05ME
88JSM05ME
88KSS05ME
88KSU05ME
88MSX05ME
List
Price $
5719.00
6022.00
6608.00
8744.00
9752.00
17463.00
18496.00
29820.00
30282.00
56221.00
5719.00
6022.00
6608.00
8744.00
9752.00
17463.00
18496.00
29820.00
30282.00
56221.00
5719.00
6022.00
6608.00
8744.00
9752.00
17463.00
18496.00
29820.00
30282.00
56221.00
5719.00
6022.00
6608.00
8744.00
9752.00
17463.00
18496.00
29820.00
30282.00
56221.00
Catalog
Number
88DSFC6FD
88ESGC6FD
88FSHC6FD
88GSJC6FD
88HSKC6FD
88ISLC6FD
88ISLC6FD
88KSSC6FD
88KSUC6FD
—
88DSFC2FG
88ESGC2FG
88FSHC2FG
88GSJC2FG
88HSKC2FG
88ISLC2FG
88JSMC2FG
88KSSC2FG
88KSUC2FG
—
88DSEC4FH
88ESFC4FH
88FSHC4FH
88GSJC4FH
88HSKC4FH
88ISLC4FH
88JSMC4FH
88KSSC4FH
88KSUC4FH
—
88DSEC5FE
88ESFC5FE
88FSFC5FE
88GSHC5FE
88HSJC5FE
88ISKC5FE
88JSMC5FE
88KSSC5FE
88KSUC5FE
—
Circuit Breaker
List
Price $
Catalog
Number
List
Price $
6944.00
7341.00
8167.00
10166.00
11269.00
18789.00
18789.00
34060.00
35141.00
—
6944.00
7245.00
8167.00
10166.00
11269.00
18789.00
20237.00
34060.00
35141.00
—
6944.00
7262.00
8348.00
10355.00
10355.00
19427.00
20995.00
34835.00
37009.00
—
6944.00
7262.00
8348.00
10355.00
12190.00
19427.00
19427.00
34835.00
37009.00
—
88DSFC6MD
88ESGC6MD
88FSHC6MD
88GSJC6MD
88HSKC6MD
88ISLC6MD
88JSMC6MD
88KSSC6MD
88KSUC6MD
88MSXC6MD
88DSFC2MG
88ESGC2MG
88FSHC2MG
88GSJC2MG
88HSKC2MG
88ISLC2MG
88JSMC2MG
88KSSC2MG
88KSUC2MG
88MSXC2MG
88DSEC4MH
88ESFC4MH
88FSHC4MH
88GSJC4MH
88HSKC4MH
88ISLC4MH
88JSMC4MH
88KSSC4MH
88KSUC4MH
88MSXC4MH
88DSEC5ME
88ESFC5ME
88FSFC5ME
88GSHC5ME
88HSJC5ME
88ISKC5ME
88JSMC5ME
88KSSC5ME
88KSUC5ME
88MSXC5ME
7280.00
7624.00
8219.00
10613.00
11716.00
20331.00
21779.00
33974.00
34590.00
66766.00
7280.00
7624.00
8219.00
10613.00
11716.00
20331.00
21779.00
33974.00
34590.00
66766.00
7280.00
7624.00
8408.00
10803.00
12639.00
21296.00
22537.00
34749.00
36458.00
66766.00
7280.00
7624.00
8408.00
10803.00
12639.00
21296.00
22537.00
34749.00
36458.00
66766.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-61
NEMA & General
Purpose Control
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
List
Price $
Fusible Disconnect
CONTROL
PRODUCTS
575V
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
MCP Catalog
Amps Number
Circuit Breaker
16
460V
10
15
20
30
40
50
60
75
150
300
10
15
25
30
50
60
75
100
150
350
15
30
40
60
75
100
150
200
300
700
15
30
40
60
75
100
150
200
300
700
Half
Size
Fuse Clip
Amps/
Volts
Closed Transition
Vacuum Starter Pump Panels
With Solid-State Overload Relay, Class 87
Selection
Coil Table
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-127.
Wiring Diagrams see page 16-143.
Replacement Parts see pages 16-155.
Sizes 4-6 will be supplied standard with a 480 volt coil. To change
the coil voltage, change the 8th character in the catalog number to
the letter shown in the coil table.
60Hz Voltage
***
24 Separate Control
120 Separate Control
200–208
220–240
277
440–480
550–600
J
F
D
G
L
H
E
Fusible Disconnect
Max Hp
460 Volts
100
200
575 Volts
100
200
NEMA Size
4
5
Overload Range
55-250A
55-250A
Fuse Clip
Amps/Volts
200A/600V
400A/600V
Catalog Number
87JCM4F*
87KCU4F*
List Price $
7894.00
12707.00
575 Volts
100
200
300
400
NEMA Size
4
5
6
6
Overload Range
55-250A
55-250A
160-540A
160-540A
Circuit Breaker
Rating Amps
250A
400A
400A
600A
Catalog Number
87JCM4M*
87KCT4M*
87MCW4M*
87MCX4M*
List Price $
8734.00
15002.00
33467.00
33467.00
Circuit Breaker
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Max Hp
460 Volts
100
200
250
400
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-62
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Reduced Voltage Heavy Duty Starters
Features and Benefits
General
Combination and non-combination
reduced voltage starter sizes range
from 0 to 6 including Siemens exclusive
motormatched half-sizes. Enclosure
types include 1, 3R/12, 4 painted and
4/4X stainless steel. All starters are UL
listed and CSA certified.
Auto Transformer Starter
▪ Maximum torque per amp
▪ Three coil auto transformer for balanced starting currents
▪ 50, 65 and 80% voltage taps
▪ Closed circuit transition
▪ Adjustable starting time
▪ ESP100 overload as standard
▪ CPT supplied as standard
▪ Wide range of factory modifications
Wye-Delta Starter
▪ Lowest starting torque
▪ Closed or open circuit transition
▪ Adjustable starting time
▪ ESP100 overload as standard
▪ CPT supplied as standard
▪ Wide range of factory modifications
Part-Winding Starter
▪ Simplest design – most economical
▪ Adjustable starting time
▪ ESP100 overload as standard
▪ CPT supplied as standard
▪ Wide range of factory modifications
CONTROL
PRODUCTS
The reduced voltage starter:
▪ Reduces inrush current
▪ Provides smoother acceleration of the
load
▪ Reduces starting torque
▪ Reduces stresses on mechanical
linkages
Characteristic
Starting current drawn from
line as % of that which would
be drawn upon full voltage
starting
Starting current drawn by the
motor
Starting torque developed as
% of that which would be
developed on full voltage
starting
Smoothness of acceleration
Part-Winding
Wye-Delta
50%
Tap
65%
Tap
80%
Tap
2 step
25%
42%
64%
65%
33%
50%
65%
80%
65%
58%
64%
40%
33%
Third in order of
Smoothness
Second in order of
Smoothness
5 seconds max.
Limited by motor
design
5-60 seconds
Limited by motor
design
Fixed
Fixed
25%
42%
Increases slightly
with speed
Allowable accelerating times
(typical)
First in order of
Smoothness
15 seconds at 200HP
max. or 30 seconds on
200HP based on
NEMA medium duty
transformers
Starting current and torque
and adjustments
Adjustable within limits
of various taps
NEMA & General
Purpose Control
Various Methods of Electro-Mechanical Reduced Voltage Motor Starting
— A General Comparison
Autotransformer
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16
Siemens manufactures the three commonly used electromechanical reduced
voltage starters. Each one is designed
for specific application requirements
and consists of auto transformer,
wye-delta and partwinding starters.
16-63
Reduced Voltage Heavy Duty Starters
Auto Transformer with Solid State Overload, Class 36 & 37
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil and Control Voltage
The coil voltage will always match the
motor voltage.
As standard, a CPT is supplied and 120V
control voltage is utilized.
To change to 120V separate control
voltage (CPT not supplied), change the
9th character to “F”.
To change to 24VAC separate control
voltage (CPT not supplied), change the
9th character to “J”.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-125.
Wiring Diagrams see page 16-136.
Replacement Parts see page 16-155.
For additional enclosure options see page 16-97.
NEMA 1 General Purpose Enclosures
Motor
Volts
230
CONTROL
PRODUCTS
16
200
NEMA & General
Purpose Control
460
575
Max
HP
10
10
15
25
30
40
50
75
150
10
15
20
30
40
50
75
100
200
15
25
30
50
75
100
150
200
400
15
25
30
50
75
100
200
400
NEMA
Size
—
2
—
3
—
4
5
5
6
—
2
—
3
—
4
5
5
6
—
2
—
3
—
4
5
5
6
—
2
—
3
—
4
5
6
Non-combination
Overload Enclosures
Half Amp
Catalog
List
Size Range
Number
Price $
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
13–27
22–45
22–45
45–90
57–115
67–135
55–250
55–250
160–540
13–27
22–45
22–45
45–90
57–115
67–135
55–250
160–540
36ESGT6BD
36FSHT6BD
36GSJT6BD
36HSKT6BD
36ISLT6BD
36JSMT6BD
—
36LTUT6BD
36MTXT6BD
36ESGT2BG
36FSHT2BG
36GSJT2BG
36HSKT2BG
36ISLT2BG
36JSMT2BG
—
36LTUT2BG
36MTXT2BG
36ESFT4BH
36FSHT4BH
36GSHT4BH
36HSKT4BH
36ISLT4BH
36JSMT4BH
—
36LTUT4BH
36MTXT4BH
36ESFT5BE
36FSHT5BE
36GSHT5BE
36HSKT5BE
36ISLT5BE
36JSMT5BE
36LTUT5BE
36MTXT5BE
4622.00
4923.00
5354.00
5784.00
10351.00
11178.00
—
19108.00
34218.00
4622.00
4923.00
5354.00
5784.00
10351.00
11178.00
—
19108.00
35442.00
4531.00
4923.00
5578.00
6233.00
10351.00
11385.00
—
20780.00
37544.00
4531.00
4923.00
5578.00
6233.00
10351.00
11385.00
20780.00
37544.00
Combination
Non-Fusible
Disconnect
Catalog
Number
37ESGT6BDD
37FSHT6BDD
37GSJT6BDD
37HSKT6BDD
37ISLT6BDD
37JSMT6BDD
—
37LTUT6BDD
37MTXT6BDD
37ESGT2BGD
37FSHT2BGD
37GSJT2BGD
37HSKT2BGD
37ISLT2BGD
37JSMT2BGD
—
37LTUT2BGD
37MTXT2BGD
37ESFT4BHD
37FSHT4BHD
37GSHT4BHD
37HSKT4BHD
37ISLT4BHD
37JSMT4BHD
—
37LTUT4BHD
37MTXT4BHD
37ESFT5BED
37FSHT5BED
37GSHT5BED
37HSKT5BED
37ISLT5BED
37JSMT5BED
37LTUT5BED
37MTXT5BED
Combination
Fusible Disconnect
Fuse
List
Clip Size
Catalog
List
Price $ Amps/Volts Number
Price $
5656.00
5957.00
6663.00
7094.00
12160.00
12987.00
—
22347.00
41654.00
5656.00
5957.00
6663.00
7094.00
12160.00
12987.00
—
22347.00
42877.00
5656.00
5957.00
6887.00
7542.00
12160.00
13194.00
—
24019.00
44979.00
5656.00
5957.00
6887.00
7542.00
12160.00
13194.00
24019.00
44979.00
60A/250V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
—
400A/250V
600A/250V
60A/250V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
—
400A/250V
600A/250V
30A/600V
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
—
400A/600V
600A/600V
30A/600V
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
400A/600V
600A/600V
37ESGT6BDF
37FSHT6BDF
37GSJT6BDF
37HSKT6BDF
37ISLT6BDF
37JSMT6BDF
—
37LTUT6BDF
37MTXT6BDF
37ESGT2BGF
37FSHT2BGF
37GSJT2BGF
37HSKT2BGF
37ISLT2BGF
37JSMT2BGF
—
37LTUT2BGF
37MTXT2BGF
37ESFT4BHF
37FSHT4BHF
37GSHT4BHF
37HSKT4BHF
37ISLT4BHF
37JSMT4BHF
—
37LTUT4BHF
37MTXT4BHF
37ESFT5BEF
37FSHT5BEF
37GSHT5BEF
37HSKT5BEF
37ISLT5BEF
37JSMT5BEF
37LTUT5BEF
37MTXT5BEF
5794.00
6208.00
7112.00
7542.00
12539.00
14297.00
—
22658.00
41846.00
5794.00
6208.00
7112.00
7542.00
12539.00
14297.00
—
22658.00
43069.00
5794.00
6069.00
6991.00
7989.00
12539.00
14504.00
—
24328.00
45172.00
5794.00
6069.00
6991.00
7989.00
12539.00
14504.00
24328.00
45172.00
Motor
Circuit
Interrupter
ETI Amps
50
50
100
100
125
150
250
400
600
50
50
100
100
125
150
250
400
600
40
50
50
100
125
150
250
400
600
40
50
50
100
125
150
250
600
Combination
Circuit Breaker
Catalog
Number
List
Price $
37ESGT6BDP
37FSHT6BDP
37GSJT6BDP
37HSKT6BDP
37ISLT6BDP
37JSMT6BDP
37LTST6BDP
37LTUT6BDP
37MTXT6BDP
37ESGT2BGP
37FSHT2BGP
37GSJT2BGP
37HSKT2BGP
37ISLT2BGP
37JSMT2BGP
37LTST2BGP
37LTUT2BGP
37MTXT2BGP
37ESFT4BHP
37FSHT4BHP
37GSHT4BHP
37HSKT4BHP
37ISLT4BHP
37JSMT4BHP
37LTST4BHP
37LTUT4BHP
37MTXT4BHP
37ESFT5BEP
37FSHT5BEP
37GSHT5BEP
37HSKT5BEP
37ISLT5BEP
37JSMT5BEP
37LTUT5BEP
37MTXT5BEP
5991.00
6405.00
6966.00
7417.00
13297.00
14125.00
24838.00
24838.00
42653.00
5991.00
6405.00
6966.00
7417.00
13297.00
14125.00
24838.00
24838.00
43875.00
5991.00
6405.00
7189.00
7844.00
13297.00
14331.00
26508.00
26508.00
45978.00
5991.00
6405.00
7189.00
7844.00
13297.00
14331.00
26508.00
45978.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-64
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Reduced Voltage Heavy Duty Starters
2 Step Part Winding with Solid State Overload, Class 36 & 37
Selection
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Coil and Control Voltage
The coil voltage will always match the
motor voltage.
As standard, a CPT is supplied and 120V
control voltage is utilized.
To change to 120V separate control
voltage (CPT not supplied), change
the 9th character to “F”.
To change to 24VAC separate control
voltage (CPT not supplied), change the
9th character to “J”.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-125.
Wiring Diagrams see page 16-136.
Replacement Parts see page 16-155.
For additional enclosure options see page 16-97.
NEMA 1 General Purpose Enclosures
Motor
Volts
Max
HP
1
200
9–18
9–18
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
9–18
9–18
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
2.5–10
9–18
13–27
22–45
30–60
30–60
57–115
67–135
55–250
55–250
160–540
2.5–10
2.5–10
13–27
13–27
22–45
30–60
57–115
67–135
55–250
55–250
160–540
36CSEP6BD
36DSEP6BD
36ESGP6BD
36FSHP6BD
36GSJP6BD
36HSKP6BD
36ISLP6BD
36JSMP6BD
—
36LTUP6BD
36CSEP2BG
36DSEP2BG
36ESGP2BG
36FSHP2BG
36GSJP2BG
36HSKP2BG
36ISLP2BG
36JSMP2BG
—
36LTUP2BG
36MTXP2BG
36CSDP4BH
36DSEP4BH
36ESFP4BH
36FSHP4BH
36GSJP4BH
36HSJP4BH
36ISLP4BH
36JSMP4BH
—
36LTUP4BH
36MTXP4BH
36CSDP5BE
36DSDP5BE
36ESFP5BE
36FSFP5BE
36GSHP5BE
36HSJP5BE
36ISKP5BE
36JSMP5BE
—
36LTUP5BE
36MTXP5BE
1844.00
1965.00
2309.00
2766.00
3317.00
3868.00
7495.00
8185.00
—
17058.00
1844.00
1965.00
2309.00
2766.00
3317.00
3868.00
7495.00
8185.00
—
17058.00
35580.00
1844.00
1965.00
2309.00
2766.00
3317.00
3868.00
7495.00
8185.00
—
17058.00
35580.00
1844.00
1965.00
2309.00
2766.00
3317.00
3868.00
7495.00
8185.00
—
17058.00
35580.00
37CSEP6BDD
37DSEP6BDD
37ESGP6BDD
37FSHP6BDD
37GSJP6BDD
37HSKP6BDD
37ISLP6BDD
37JSMP6BDD
—
37LTUP6BDD
37CSEP2BGD
37DSEP2BGD
37ESGP2BGD
37FSHP2BGD
37GSJP2BGD
37HSKP2BGD
37ISLP2BGD
37JSMP2BGD
—
37LTUP2BGD
37MTXP2BGD
37CSDP4BHD
37DSEP4BHD
37ESFP4BHD
37FSHP4BHD
37GSJP4BHD
37HSJP4BHD
37ISLP4BHD
37JSMP4BHD
—
37LTUP4BHD
37MTXP4BHD
37CSDP5BED
37DSDP5BED
37ESFP5BED
37FSFP5BED
37GSHP5BED
37HSJP5BED
37ISKP5BED
37JSMP5BED
—
37LTUP5BED
37MTXP5BED
2877.00
2998.00
3342.00
4075.00
5126.00
5677.00
10734.00
11424.00
—
24492.00
2877.00
2998.00
3342.00
4075.00
5126.00
5677.00
10734.00
11424.00
—
24492.00
43445.00
2877.00
2998.00
3342.00
4075.00
5126.00
5677.00
10734.00
11424.00
—
24492.00
43445.00
2877.00
2998.00
3342.00
4075.00
5126.00
5677.00
10734.00
11424.00
—
24492.00
43445.00
60A/250V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
—
600A/250V
60A/250V
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
—
600A/250V
1200A/250V
30A/600V
60A/600V
60A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
—
600A/600V
1200A/600V
30A/600V
60A/600V
60A/600V
60A/600V
100A/600V
200A/600V
400A/600V
400A/600V
400A/600V
600A/600V
1200A/600V
37CSEP6BDF
37DSEP6BDF
37ESGP6BDF
37FSHP6BDF
37GSJP6BDF
37HSKP6BDF
37ISLP6BDF
37JSMP6BDF
—
37LTUP6BDF
37CSEP2BGF
37DSEP2BGF
37ESGP2BGF
37FSHP2BGF
37GSJP2BGF
37HSKP2BGF
37ISLP2BGF
37JSMP2BGF
—
37LTUP2BGF
37MTXP2BGF
37CSDP4BHF
37DSEP4BHF
37ESFP4BHF
37FSHP4BHF
37GSJP4BHF
37HSJP4BHF
37ISLP4BHF
37JSMP4BHF
—
37LTUP4BHF
37MTXP4BHF
37CSDP5BEF
37DSDP5BEF
37ESFP5BEF
37FSFP5BEF
37GSHP5BEF
37HSJP5BEF
37ISKP5BEF
37JSMP5BEF
37LTSP5BEF
37LTUP5BEF
37MTXP5BEF
2903.00
3248.00
3938.00
4523.00
5505.00
6056.00
11036.00
11734.00
—
24686.00
2903.00
3248.00
3938.00
4523.00
5505.00
6056.00
11036.00
11734.00
—
24686.00
44540.00
2903.00
3024.00
3721.00
4178.00
5505.00
6056.00
11036.00
11734.00
—
24686.00
44540.00
2903.00
3024.00
3721.00
4178.00
5505.00
6056.00
11036.00
11734.00
24686.00
24686.00
44540.00
Motor
Circuit
Interrupter
ETI Amps
30
50
100
100
125
150
250
400
600
600
30
50
100
100
100
150
250
250
400
600
1200
30
30
50
100
100
125
150
250
400
600
1200
30
30
50
50
100
125
150
250
—
400
1200
Combination
Circuit Breaker
Catalog
Number
List
Price $
37CSEP6BDP
37DSEP6BDP
37ESGP6BDP
37FSHP6BDP
37GSJP6BDP
37HSKP6BDP
37ISLP6BDP
37JSMP6BDP
37LTSP6BDP
37LTUP6BFP
37CSEP2BGP
37DSEP2BGP
37ESGP2BGP
37FSHP2BGP
37GSJP2BGP
37HSKPP2BGP
37ISLP2BGP
37JSMP2BGP
37LTSP2BGP
37LTUP2BGP
37MTXP2BGP
37CSDP4BHP
37DSEP4BHP
37ESFP4BHP
37FSHP4BHP
37GSJP4BHP
37HSJP4BHP
37ISLP4BHP
37JSMP4BHP
37LTSP4BHP
37LTUP4BHP
37MTXP4BHP
37CSDP5BEP
37DSDP5BEP
37ESFP5BEP
37FSFP5BEP
37GSHP5BEP
37HSJP5BEP
37ISKP5BEP
37JSMP5BEP
—
37LTUP5BEP
37MTXP5BEP
3325.00
3446.00
3790.00
4376.00
6263.00
6814.00
13225.00
13914.00
25492.00
25492.00
3325.00
3446.00
3790.00
4376.00
6263.00
6814.00
13225.00
13914.00
25492.00
25492.00
47271.00
3325.00
3446.00
3790.00
4376.00
6263.00
6814.00
13225.00
13914.00
25492.00
25492.00
47271.00
3325.00
3446.00
3790.00
4376.00
6263.00
6814.00
13225.00
13914.00
—
25492.00
47271.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-65
NEMA & General
Purpose Control
575
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
Catalog
Number
Combination
Fusible Disconnect
Fuse
List
Clip Size
Catalog
List
Price $ Amps/Volts Number
Price $
CONTROL
PRODUCTS
460
0
1
—
2
—
3
—
4
5
5
0
1
—
2
—
3
—
4
5
5
6
0
1
—
2
—
3
—
4
5
5
6
0
1
—
2
—
3
—
4
5
5
6
Combination
Non-Fusible
Disconnect
16
230
7 ⁄2
10
15
20
30
40
50
75
100
150
7 1⁄2
10
20
25
30
50
60
75
125
150
300
10
15
30
40
60
75
100
150
250
350
600
10
15
30
40
60
75
100
150
250
350
600
NEMA
Size
Non-combination
Overload Enclosures
Half Amp
Catalog
List
Size Range
Number
Price $
Reduced Voltage Heavy Duty Starters
Wye Delta, Open Transition with Solid State Overload, Class 36 & 37
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil and Control Voltage
The coil voltage will always match the
motor voltage.
As standard, a CPT is supplied and 120V
control voltage is utilized.
To change to 120V separate control
voltage (CPT not supplied), change
the 9th character to “F”.
To change to 24VAC separate control
voltage (CPT not supplied), change the
9th character to “J”.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-125.
Wiring Diagrams see page 16-138.
Replacement Parts see page 16-155.
For additional enclosure options see page 16-97.
NEMA 1 General Purpose Enclosures
Motor
Volts
230
CONTROL
PRODUCTS
16
200
NEMA & General
Purpose Control
460
575
Max
HP
10
15
20
30
40
50
60
75
150
300
10
15
25
30
50
60
75
100
150
350
15
30
40
60
75
100
150
200
300
700
15
30
40
60
75
100
150
200
300
700
NEMA
Size
Half
Size
Overload
Amp
Range
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
—
13⁄4
—
21⁄2
—
31⁄2
—
—
—
—
13–27
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
13–27
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
9–18
13–27
22–45
22–45
45–90
57–115
67–135
55–250
55–250
160–540
9–18
13–27
13–27
22–45
30–60
57–115
67–135
55–250
55–250
160–540
Non-combination
Enclosures
Catalog
Number
36DSF06BD
36ESG06BD
36FSH06BD
36GSJ06BD
36HSK06BD
36ISL06BD
36JSM06BD
36LTS06BD
36LTU06BD
36MTX06BD
36DSF02BG
36ESG02BG
36FSH02BG
36GSJ02BG
36HSK02BG
36ISL02BG
36JSM02BG
36LTS02BG
36LTU02BG
36MTX02BG
36DSE04BH
36ESF04BH
36FSH04BH
36GSJ04BH
36HSK04BH
36ISL04BH
36JSM04BH
36LTSS04BH
36LTU04BH
36MTX04BH
36DSE05BE
36ESF05BE
36FSF05BE
36GSH05BE
36HSJ05BE
36ISK05BE
36JSM05BE
36LTS05BE
36LTU05BE
36MTX05BE
Combination
Non-Fusible
Disconnect
List
Catalog
Price $ Number
2998.00
3266.00
3541.00
4342.00
5134.00
9632.00
10666.00
19143.00
19143.00
40922.00
2998.00
3266.00
3541.00
4342.00
5134.00
9632.00
10666.00
19143.00
19143.00
40922.00
2998.00
3266.00
3541.00
4342.00
5134.00
9632.00
10666.00
19143.00
19143.00
40922.00
2998.00
3266.00
3541.00
4342.00
5134.00
9632.00
10666.00
19143.00
19143.00
40922.00
37DSF06BDD
37ESG06BDD
37FSH06BDD
37GSJ06BDD
37HSK06BDD
37ISL06BDD
37JSM06BDD
37LTS06BDD
37LTU06BDD
37MTX06BDD
37DSF02BGD
37ESG02BGD
37FSH02BGD
37GSJ02BGD
37HSK02BGD
37ISL02BGD
37JSM02BGD
37LTS02BGD
37LTU02BGD
37MTX02BGD
37DSE04BHD
37ESF04BHD
37FSH04BHD
37GSJ04BHD
37HSK04BHD
37ISL040BHD
37JSM04BHD
37LTS04BHD
37LTU04BHD
37MTX04BHD
37DSE05BED
37ESF05BED
37FSF05BED
37GSH05BED
37HSJ05BED
37ISK05BED
37JSM05BED
37LTS05BED
37LTU05BED
37MTX05BED
Combination
Fusible
Disconnect
List
Price $
4031.00
4600.00
4850.00
5221.00
6944.00
11441.00
13904.00
25965.00
25965.00
48787.00
4031.00
4600.00
4850.00
5221.00
6944.00
11441.00
13904.00
25965.00
25965.00
48787.00
4031.00
4600.00
4850.00
5221.00
6944.00
11441.00
13904.00
25965.00
25965.00
48787.00
4031.00
4600.00
4850.00
5221.00
6944.00
11441.00
13904.00
21507.00
25965.00
48787.00
Fuse
Clip Size
Catalog
Amps/Volts Number
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
400A/250V
600A/250V
1200A/250V
60A/250V
60A/250V
100A/250V
200A/250V
200A/250V
200A/600V
400A/250V
400A/250V
600A/250V
1200A/250V
30A/600V
60A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
1600A/600V
30A/600V
60A/600V
100A/600V
100A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
1600A/600V
37DSF06BDF
37ESG06BDF
37FSH06BDF
37GSJ06BDF
37HSK06BDF
37ISL06BDF
37JSM06BDF
37LTS06BDF
37LTU06BDF
37MTX06BDF
37DSF02BGF
37ESG02BGF
37FSH02BGF
37GSJ02BGF
37HSK02BGF
37ISL02BGF
37JSM02BGF
37LTS02BGF
37LTU02BGF
37MTX02BGF
37DSE04BHF
37ESF04BHF
37FSH04BHF
37GSJ04BHF
37HSK04BHF
37ISL04BHF
37JSM04BHF
37LTS04BHF
37LTU04BHF
37MTX04BHF
37DSE05BEF
37ESF05BEF
37FSF05BEF
37GSH05BEF
37HSJ05BEF
37ISK05BEF
37JSM05BEF
37LTS05BEF
37LTU05BEF
37MTX05BEF
List
Price $
4100.00
4669.00
5298.00
6875.00
7323.00
13611.00
14215.00
27490.00
27490.00
49880.00
4100.00
4669.00
5298.00
6875.00
7323.00
13611.00
14215.00
27490.00
27490.00
49880.00
4100.00
4669.00
4954.00
6531.00
7323.00
11820.00
14215.00
26770.00
26770.00
49880.00
4100.00
4669.00
4954.00
6531.00
7323.00
11820.00
14215.00
26770.00
26770.00
49880.00
Motor
Circuit
Interrupter
ETI Amps
50
100
100
125
150
250
250
400
600
1200
50
50
100
100
150
250
250
400
600
1200
30
50
100
100
125
150
250
400
600
1200
30
50
50
100
125
150
250
250
400
1600
Combination
Circuit Breaker
Catalog
Number
List
Price $
37DSF06BDP
37ESG06BDP
37FSH06BDP
37GSJ06BDP
37HSK06BDP
37ISL06BDP
37JSM06BDP
37LTS06BDP
37LTU06BDP
37MTX06BDP
37DSF02BGP
37ESG02BGP
37FSH02BGP
37GSJ02BGP
37HSK02BGP
37ISL02BGP
37JSM02BGP
37LTS02BGP
37LTU02BGP
37MTX02BGP
37DSE04BHP
37ESF04BHP
37FSH04BHP
37GSJ04BHP
37HSK04BHP
37ISL04BHP
37JSM04BHP
37LTS04BHP
37LTU04BHP
37MTX04BHP
37DSE05BEP
37ESF05BEP
37FSF05BEP
37GSH05BEP
37HSJ05BEP
37ISK05BEP
37JSM05BEP
37LTS05BEP
37LTU05BEP
37MTX05BEP
4479.00
4782.00
5151.00
7289.00
8081.00
15360.00
16395.00
27577.00
27577.00
52611.00
4479.00
4782.00
5151.00
7289.00
8081.00
15360.00
16395.00
27577.00
27577.00
52611.00
4479.00
4782.00
5151.00
7289.00
8081.00
15360.00
16395.00
27577.00
27577.00
52611.00
4479.00
4782.00
5151.00
7289.00
8081.00
15360.00
16395.00
27577.00
27577.00
52611.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
16-66
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Reduced Voltage Heavy Duty Starters
Wye Delta, Closed Transition with Solid State Overload, Class 36 & 37
Ordering Information
䊳
䊳
䊳
䊳
䊳
䊳
Selection
Coil and Control Voltage
The coil voltage will always match the
motor voltage.
As standard, a CPT is supplied and 120V
control voltage is utilized.
To change to 120V separate control
voltage (CPT not supplied), change
the 9th character to “F”.
To change to 24VAC separate control
voltage (CPT not supplied), change the
9th character to “J”.
Field Modification Kits see page 16-79.
Factory Modifications see page 16-94.
Dimensions see page 16-125.
Wiring Diagrams see page 16-138.
Replacement Parts see page 16-155.
For additional enclosure options see page 16-97.
NEMA 1 General Purpose Enclosures
Motor
Volts
200
10
15
20
30
40
50
60
75
150
300
10
15
25
30
50
60
75
100
150
350
15
30
40
60
75
100
150
200
300
700
15
30
40
60
75
100
150
200
300
700
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
1
—
2
—
3
—
4
5
5
6
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
—
1 3⁄4
—
2 1⁄2
—
3 1⁄2
—
—
—
—
13–27
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
13–27
20–40
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
9–18
13–27
22–45
30–60
45–90
57–115
67–135
55–250
55–250
160–540
9–18
13–27
13–27
22–45
30–60
57–115
67–135
55–250
55–250
160–540
Catalog
Number
List
Price $
Catalog
Number
36DSFC6BD
36ESGC6BD
36FSHC6BD
36GSJC6BD
36HSKC6BD
36ISLC6BD
36JSMC6BD
36LTSC6BD
36LTUC6BD
36MTXC6BD
36DSFC2BG
36ESGC2BG
36FSHC2BG
36GSJC2BG
36HSKC2BG
36ISLC2BG
36JSMC2BG
36LTSC2BG
36LTUC2BG
36MTXC2BG
36DSEC4BH
36ESFC4BH
36FSHC4BH
36GSJC4BH
36HSKC4BH
36ISLC4BH
36JSMC4BH
36LTSC4BH
36LTUC4BH
36MTXC4BH
36DSEC5BE
36ESFC5BE
36FSFC5BE
36GSHC5BE
36HSJC5BE
36ISKC5BE
36JSMC5BE
36LTSC5BE
36LTUC5BE
36MTXC5BE
4557.00
4858.00
5151.00
6212.00
7099.00
12501.00
13948.00
23450.00
23450.00
51467.00
4557.00
4858.00
5151.00
6212.00
7099.00
12501.00
13948.00
23450.00
23450.00
51467.00
4557.00
4858.00
5340.00
6401.00
8451.00
13465.00
14706.00
25320.00
25320.00
51467.00
4557.00
4858.00
5340.00
6401.00
8451.00
13465.00
14714.00
25320.00
25320.00
51467.00
37DSFC6BDD
37ESGC6BDD
37FSHC6BDD
37GSJC6BDD
37HSKC6BDD
37ISLC6BDD
37JSMC6BDD
37LTSC6BDD
37LTUC6BDD
37MTXC6BDD
37DSFC2BGD
37ESGC2BGD
37FSHC2BGD
37GSJC2BGD
37HSKC2BGD
37ISLC2BGD
37JSMC2BGD
37LTSC2BGD
37LTUC2BGD
37MTXC2BGD
37DSEC4BHD
37ESFC4BHD
37FSHC4BHD
37GSJC4BHD
37HSKC4BHD
37ISLC4BHD
37JSMC4BHD
37LTSC4BHD
37LTUC4BHD
37MTXC4BHD
37DSEC5BED
37ESFC5BED
37FSFC5BED
37GSHC5BED
37HSJC5BED
37ISKC5BED
37JSMC5BED
37LTSC5BED
37LTUC5BED
37MTXC5BED
List
Price $
5591.00
5894.00
6462.00
8020.00
8908.00
15740.00
17186.00
30885.00
30885.00
59331.00
5591.00
5894.00
6462.00
8020.00
8908.00
15740.00
17186.00
30885.00
30885.00
59331.00
5591.00
5894.00
6651.00
8210.00
9829.00
16704.00
17944.00
32755.00
32755.00
59331.00
5591.00
5894.00
6651.00
8210.00
9829.00
16704.00
17944.00
32755.00
32755.00
59331.00
60A/250V
100A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
400A/250V
600A/250V
1200A/250V
60A/250V
60A/250V
100A/250V
200A/250V
200A/250V
200A/250V
400A/250V
400A/250V
600A/250V
1200A/250V
30A/600V
60A/600V
100A/600V
200A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
1600A/600V
30A/600V
60A/600V
100A/600V
100A/600V
200A/600V
200A/600V
400A/600V
400A/600V
600A/600V
1600A/600V
37DSFC6BDF
37ESGC6BDF
37FSHC6BDF
37GSJC6BDF
37HSKC6BDF
37ISLC6BDF
37JSMC6BDF
37LTSC6BDF
37LTUC6BDF
37MTXC6BDF
37DSFC2BGF
37ESGC2BGF
37FSHC2BGF
37GSJC2BGF
37HSKC2BGF
37ISLC2BGF
37JSMC2BGF
37LTSC2BGF
37LTUC2BGF
37MTXC2BGF
37DSEC4BHF
37ESFC4BHF
37FSHC4BHF
37GSJC4BHF
37HSKC4BHF
37ISLC4BHF
37JSMC4BHF
37LTSC4BHF
37LTUC4BHF
37MTXC4BHF
37DSEC5BEF
37ESFC5BEF
37FSFC5BEF
37GSHC5BEF
37HSJC5BEF
37ISKC5BEF
37JSMC5BEF
37LTSC5BEF
37LTUC5BEF
37MTXC5BEF
5661.00
5962.00
6573.00
8399.00
9287.00
16050.00
17497.00
31797.00
31797.00
60425.00
5661.00
5962.00
6573.00
8399.00
9287.00
16050.00
17497.00
31797.00
31797.00
60425.00
5661.00
5962.00
6755.00
8589.00
10208.00
17014.00
18255.00
33667.00
33667.00
60425.00
5661.00
5962.00
6755.00
8589.00
10208.00
17014.00
18255.00
33667.00
33667.00
60425.00
Motor
Circuit
Interrupter
ETI Amps
50
100
100
125
150
250
250
400
600
1200
50
50
100
100
150
250
250
400
600
1200
30
50
100
100
125
150
250
400
600
1200
30
50
50
100
125
150
250
250
400
1600
Combination
Circuit Breaker
Catalog
Number
List
Price $
37DSFC6BDP
37ESGC6BDP
37FSHC6BDP
37GSJC6BDP
37HSKC6BDP
37ISLC6BDP
37JSMC6BDP
37LTSC6BDP
37LTUC6BDP
37MTXC6BFP
37DSFC2BGP
37ESGC2BGP
37FSHC2BGP
37GSJC2BGP
37HSKC2BGP
37ISLC2BGP
37JSMC2BGP
37LTSC2BGP
37LTUC2BGP
37MTXC2BGP
37DSEC4BHP
37ESFC4BHP
37FSHC4BHP
37GSJC4BHP
37HSKC4BHP
37ISLC4BHP
37JSMC4BHP
37LTSC4BHP
37LTUC4BHP
37MTXC4BHP
37DSEC5BEP
37ESFC5BEP
37FSFC5BEP
37GSHC5BEP
37HSJC5BEP
37ISKC5BEP
37JSMC5BEP
37LTSC5BEP
37LTUC5BEP
37MTXC5BEP
6040.00
6384.00
6763.00
9157.00
10045.00
18230.00
19677.00
31884.00
31884.00
63156.00
6040.00
6384.00
6763.00
9157.00
10045.00
18230.00
19677.00
31884.00
31884.00
63156.00
6040.00
6384.00
6952.00
9347.00
10966.00
19195.00
20435.00
33753.00
33753.00
63156.00
6040.00
6384.00
6952.00
9347.00
10966.00
19195.00
20435.00
33753.00
33753.00
63156.00
Note: Hp’s shown above are based on the overload amp
range for the FLA’s (per the National Electric Code)
of typical industrial motors. All starter sizes carry
one maximum Hp rating.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-67
NEMA & General
Purpose Control
575
Half
Size
Combination
Fusible Disconnect
Fuse
Clip Size
Catalog
List
Amps/Volts Number
Price $
CONTROL
PRODUCTS
460
NEMA
Size
Combination
Non-Fusible
Disconnect
16
230
Max
HP
Overload
Amp
Range
Non-combination
Enclosures
Lighting and Heating Control
Electrically Held Lighting Contactors
Features
Application
▪
▪
▪
▪
▪
▪
▪
Siemens electrically held lighting
contactors provide a safe, convenient
means of local or remote switching
for tungsten and ballast lamp loads,
mercury arc lamps, and 3-phase
resistive heating.
Compact Design
Silver Cadmium Oxide Contacts
Pressure Type Terminals
Straight Thru Wiring
Wide Variety of Contact Configurations
12-Poles Maximum
Available From 20 Amps–400 Amps
Up to 12-Poles 20, 30 and 60 Amps
3-Poles On 100–400 Amps
These lighting contactors are rated at
480V Tungsten, 600V Ballast. They are
available in 2–12 poles with a variety of
NO and NC contact arrangements.
Typical applications include:
▪ Industrial and Commercial Buildings
▪ Stadiums
▪ Airports
▪ Non-Critical Resistive Heaters and
other Non-Inductive Loads
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
▪ Full Line of Enclosures
NEMA 1
NEMA 3R/12
NEMA 4/4X (Stainless Steel)
▪ Available In Combination Form with
Choice of:
Fusible Disconnect
Non-Fusible Disconnect
Circuit Breaker
All
Combination Lighting Contactors
▪
are UL Service Entrance Listed
▪ Full Line of Factory And Field
Modifications
▪ UL Listed Files #E14900
▪ CSA Certified File LR 6535
Class LE electrically held lighting
and heating contactors are used in
applications where it is not critical that
the contacts remain in the closed
position during loss of control power.
16-68
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
General
Lighting and Heating Control
Electrically Held Lighting Contactors, Class LE
Selection
Ordering Information
Coil Table
Replace the *** with a number from the coil table.
Field modifications see page 16-79.
왘 Factory modification kits see page 16-94.
왘 Dimensions see page 16-110 open page 16-128 enclosed.
왘 Wiring Diagrams see page 16-144.
왘 Replacement parts see page 16-158.
60Hz Voltage
Number
24
120
208
240
277
480
600
024
120
208
240
277
480
600
왘
왘
Open and Non-combination Enclosed Contactors
Open Type
NEMA 1
Max.
Amp
Rating
Number
of
Poles
2
3
4
6
20
8
9
30
60
Catalog Number
List Price $
Catalog Number
List Price $
Catalog Number
2
0
3
0
4
2
1
0
2
0
4
2
0
4
2
0
4
2
0
4
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
0
3
0
2
3
4
4
6
4
6
8
5
7
9
6
8
10
8
10
12
3
6
9
12
3
6
9
12
3
3
3
3
LEN00B200***A
LEN00B002***A
LEN00B300***A
LEN00B003***A
LEN00B400***A
LEN00B202***A
LEN00B103***A
LEN00B004***A
LEN00B204***A
LEN00B006***A
LEN00B404***A
LEN00B206***A
LEN00B008***A
LEN00B405***A
LEN00B207***A
LEN00B009***A
LEN00B406***A
LEN00B208***A
LEN00B010***A
LEN00B408***A
LEN00B210***A
LEN00B012***A
LEN00C003***A
LEN00C006***A
LEN00C009***A
LEN00C012***A
LEN00D003***A
LEN00D006***A
LEN00D009***A
LEN00D012***A
LEN00E003***A
LEN00F003***A
LEN00G003***A
LEN00H003***A
242.00
242.00
268.00
268.00
344.00
344.00
344.00
344.00
448.00
448.00
612.00
612.00
612.00
664.00
664.00
664.00
715.00
715.00
715.00
819.00
819.00
819.00
293.00
603.00
914.00
1223.00
534.00
1154.00
1774.00
2395.00
861.00
2067.00
4506.00
12578.00
LEN01B200***A
LEN01B002***A
LEN01B300***A
LEN01B003***A
LEN01B400***A
LEN01B202***A
LEN01B103***A
LEN01B004***A
LEN01B204***A
LEN01B006***A
LEN01B404***A
LEN01B206***A
LEN01B008***A
LEN01B405***A
LEN01B207***A
LEN01B009***A
LEN01B406***A
LEN01B208***A
LEN01B010***A
LEN01B408***A
LEN01B210***A
LEN01B012***A
LEN01C003***A
LEN01C006***A
LEN01C009***A
LEN01C012***A
LEN01D003***A
LEN01D006***A
LEN01D009***A
LEN01D012***A
LEN01E003***A
LEN01F003***A
LEN01G003***A
LEN01H003***A
268.00
268.00
293.00
293.00
371.00
371.00
371.00
371.00
534.00
534.00
698.00
698.00
698.00
750.00
750.00
750.00
801.00
801.00
801.00
905.00
905.00
905.00
310.00
621.00
930.00
1240.00
621.00
1240.00
1861.00
2481.00
1033.00
2430.00
5168.00
14232.00
LEN02B200***A
LEN02B002***A
LEN02B300***A
LEN02B003***A
LEN02B400***A
LEN02B202***A
LEN02B103***A
LEN02B004***A
LEN02B204***A
LEN02B006***A
LEN02B404***A
LEN02B206***A
LEN02B008***A
LEN02B405***A
LEN02B207***A
LEN02B009***A
LEN02B406***A
LEN02B208***A
LEN02B010***A
LEN02B408***A
LEN02B210***A
LEN02B012***A
LEN02C003***A
LEN02C006***A
LEN02C009***A
LEN02C012***A
LEN02D003***A
LEN02D006***A
LEN02D009***A
LEN02D012***A
LEN02E003***A
LEN02F003***A
LEN02G003***A
LEN02H003***A
List Price $ Catalog Number
414.00
414.00
440.00
440.00
517.00
517.00
517.00
517.00
621.00
621.00
784.00
784.00
784.00
853.00
853.00
853.00
919.00
919.00
919.00
1022.00
1022.00
1022.00
462.00
793.00
1120.00
1430.00
861.00
1644.00
2305.00
3004.00
1309.00
3231.00
7431.00
17635.00
LEN04B200***A
LEN04B002***A
LEN04B300***A
LEN04B003***A
LEN04B400***A
LEN04B202***A
LEN04B103***A
LEN04B004***A
LEN04B204***A
LEN04B006***A
LEN04B404***A
LEN04B206***A
LEN04B008***A
LEN04B405***A
LEN04B207***A
LEN04B009***A
LEN04B406***A
LEN04B208***A
LEN04B010***A
LEN04B408***A
LEN04B210***A
LEN04B012***A
LEN04C003***A
LEN04C006***A
LEN04C009***A
LEN04C012***A
LEN04D003***A
LEN04D006***A
LEN04D009***A
LEN04D012***A
LEN04E003***A
LEN04F003***A
LEN04G003***A
LEN04H003***A
List Price $
554.00
554.00
651.00
651.00
728.00
728.00
728.00
728.00
758.00
758.00
925.00
925.00
925.00
976.00
976.00
976.00
1028.00
1028.00
1028.00
1147.00
1147.00
1147.00
702.00
991.00
1400.00
1788.00
1293.00
2140.00
2995.00
3904.00
1981.00
4036.00
8133.00
19616.00
For
conduit hubs and conversion instructions, see page
16-87.
be field assembled. Order mounting kit
49MCMPMA and required number of contactors.
Example, 3, three pole contactors and 1 mounting plate
for a 9-pole open assembly.
Can
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-69
NEMA & General
Purpose Control
100
200
300
400
3
6
9
12
3
6
9
12
3
3
3
3
Normally
Open
Contacts
CONTROL
PRODUCTS
12
Watertight, Dust-tight,
Corrosion Resistant,
304 Stainless Steel
Industrial Use
Weatherproof
Normally
Closed
Contacts
16
10
NEMA 4/4X Stainless Steel
NEMA 12
NEMA 3/3R
General Purpose
Lighting and Heating Control
Combination Electrically Held Lighting Contactors, Class LE
Ordering Information
Selection
Coil Table
Replace the *** with a number from the coil table.
Field modification kits see page 16-79.
왘 Factory modifications see page 16-94.
왘 Dimensions see page 16-128.
왘 Wiring Diagrams see page 16-144.
왘 Replacement parts see page 16-155.
왘
왘
60Hz Voltage
Number
24
120
208
240
277
480
600
024
120
208
240
277
480
600
Combination Lighting Contactors
NEMA 12, NEMA 3/3R
NEMA 4 Painted (thru 100 amps)
NEMA 1
General Purpose
Disconnect
Type
Non-Fusible
Max.
Amp
Rating
20
30
60
100
200
300
20
30
60
Fusible
100
300
Circuit
Breaker
20
30
60
100
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Disc
Amp
Rating
Disc Amp/ Circuit
Fuse Clip Breaker
Rating
Rating
Catalog Number
30A
30A
60A
100A
200A
400A
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30A/250V
30A/600V
30A/250V
30A/600V
60A/250V
60A/600V
100A/250V
100A/600V
200A/250V
200A/600V
400A/250V
400A/600V
—
—
—
—
LEDB1B003***A
LEDB1C003***A
LEDD1D003***A
LEDF1E003***A
LEDH1F003***A
LEDK1G003***A
LEFA1B003***A
LEFB1B003***A
LEFA1C003***A
LEFB1C003***A
LEFC1D003***A
LEFD1D003***A
LEFE1E003***A
LEFF1E003***A
LEFG1F003***A
LEFH1F003***A
LEFJ1G003***A
LEFK1G003***A
LEBT1B003***A
LEBV1C003***A
LEBY1D003***A
LEBZ1E003***A
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20A
30A
60A
100A
List Price $
768.00
784.00
1233.00
2051.00
4006.00
8408.00
793.00
810.00
810.00
827.00
1266.00
1293.00
2137.00
2180.00
4152.00
4186.00
8650.00
8718.00
1077.00
1094.00
1533.00
2214.00
Industrial Use
Weatherproof, Watertight, Dust-tight
Watertight, Dust-tight,
Corrosion Resistant
304 Stainless Steel
Catalog Number
List Price $
Catalog Number
List Price $
LEDB2B003***A
LEDB2C003***A
LEDD2D003***A
LEDF2E003***A
LEDH2F003***A
LEDK2G003***A
LEFA2B003***A
LEFB2B003***A
LEFA2C003***A
LEFB2C003***A
LEFC2D003***A
LEFD2D003***A
LEFE2E003***A
LEFF2E003***A
LEFG2F003***A
LEFH2F003***A
LEFJ2G003***A
LEFK2G003***A
LEBT2B003***A
LEBV2C003***A
LEBY2D003***A
LEBY2D003***A
855.00
991.00
1526.00
2430.00
5057.00
10958.00
880.00
898.00
1016.00
1033.00
1559.00
1586.00
2516.00
2559.00
5203.00
5237.00
11199.00
11269.00
1164.00
1301.00
1826.00
1826.00
LEDB4B003***A
LEDB4C003***A
LEDD4D003***A
LEDF4E003***A
LEDH4F003***A
LEDK4G003***A
LEFA4B003***A
LEFB4B003***A
LEFA4C003***A
LEFB4C003***A
LEFC4D003***A
LEFD4D003***A
LEFE4E003***A
LEFF4E003***A
LEFG4F003***A
LEFH4F003***A
LEFJ4G003***A
LEFK4G003***A
LEBT4B003***A
LEBV4C003***A
LEBY4D003***A
LEBZ4E003***A
1512.00
1612.00
2507.00
4272.00
6849.00
15662.00
1512.00
1529.00
1637.00
1654.00
2542.00
2567.00
4359.00
4403.00
6996.00
7030.00
15903.00
15972.00
1796.00
1922.00
2809.00
4437.00
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
200
Number
of NO
Poles
NEMA 4/4X Stainless Steel
For
conduit hubs and conversion instructions, see page
16-87.
16-70
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Lighting and Heating Contractors
Mechanically and Magnetically Held Lighting Contactors
CLM 20 Amp
CLM 100 Amp
Operation (Magnetic Latch)
A permanent magnet is built into the
contactor structure of the 30A, 60A,
100A, and 200A contactors that will
maintain the contactor in its energized
state indefinitely without using control
power. When energized, a DC current is
applied that produces a magnetic field
that reinforces the polarity of the
permanent magnet, and the contactor
pulls in immediately. The current to the
coil is disconnected by the coil clearing
interlock. In order to drop out the
contactor, it is necessary to apply a field
through the OFF coil in the reverse
direction to the permanent magnet.
This momentarily cancels the magnetic
attraction and the contactor drops out.
Coil and module failures are possible
when used with solid state relays and
PLC outputs. 24-volt systems are ok to
use, but 120 volts and above should be
discouraged. If higher values cannot
be avoided, an interposing relay should
be used.
through control modules.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-71
NEMA & General
Purpose Control
(Mechanically Latched)
The 300 & 400A lighting and heating
contactors operate using a latching
mechanism.
Closing – When the “close” pushbutton
is operated, the closing coil is energized,
closing the contactor. As the contactor
closes, the latch lever hooks over the
latch pin to mechanically latch the
contactor closed. The coil-clearing
auxiliary contact de-energizes the
closing coil.
Opening – When the “Trip” pushbutton
is operated, the trip solenoid coil is
energized, unhooking the latch lever
from the latch pin, which allows the
contactor to open. As the contactor
opens, the coil-clearing auxiliary contact
de-energizes the trip solenoid coil.
CONTROL
PRODUCTS
Operation
Two Wire Control Module
(Accessory 47)
The advantages of two wire controls are:
1. Control station can have lower
ampacity rating.
2. Control station can be located an
extended distance from the CLM
contactor.
3. Control module can frequently be
controlled directly from
microprocessor.
4. Control devices can be two wire
single pole, single-throw types.
5. Control voltage may be different than
the CLM coil circuit and at a lower
voltage level.
Note: If the control power to the solid
state control module is lost while the
module is energized the lighting
contactor will open. If the line power
to the lighting contactor is lost while the
contactor is energized the contactor will
not change state with return of line
voltage. Power will be restored to
the load if the control module is still
energized. Control station should
be the maintained type.
Three Wire Control Module
(Accessory 48)
1. The accessory 48 consists of two
relays with contacts appropriately
interconnected which provides for an
interlocking that prevents both relays
from being energized simultaneously.
2. This module has similar characteristics
to the two wire module (Accessory 47)
except there is no change of switch
contact position upon loss of control line
power. Control stations should be the
momentary type.
Selection
Stop-Start Control Module
(Accessory 49)
Stop-start three wire maintained control
is an arrangement used mostly when
controlling motors, but can be used in
lighting applications.
Any number of momentary contact
control stations consisting of normally
open start buttons and normally closed
stop buttons can be used. Start buttons
are connected in parallel and stop
buttons in series.
16
Mechanically Latched Lighting
and Heating Contactor
The CLM Lighting Contactors can be
used with metal halide, mercury vapor,
quartz halogen, tungsten and fluorescent lighting. They provide reliable and
convenient lighting control in numerous
applications, such as industrial plants,
schools, hospitals, office buildings,
shopping centers, airports, stadiums . . .
literally everywhere lighting is required.
The CLMs are listed under UL 508 with
no derating when used open or
enclosed. Combination lighting
contactors are listed for UL service
entrance.
UL listed File #E60310
CSA Certified File LR 6535
Type CLM 20 Amp Lighting
Contactor Solid State Control
Modules
The CLM 20 amp lighting contactor
is an electromagnetically operated,
mechanically latched three wire control
contactor. The most commonly used
method of control is a three position
momentary contact switch with a
center-off position. The controlling
device must be able to make the coil
inrush current but need not break it.
The coil current is interrupted by the
control contacts within the CLM
contactor. Power for the control line may
come from a separate source or directly
from the line side of the CLM contactor.
The CLM contactor can also be
controlled by devices such as:
▪ Break-glass control stations
▪ Timers having single pole, double
throw contacts
▪ Photo-electric cells
▪ Energy management systems
▪ Microprocessors
▪ Occupancy sensors
Control modules make it possible to
use a controlling device that does not
have enough current-carrying capacity
to control the CLM contactor directly.
Control modules are also used when
the control station is to be located at
a distance greater than the allowable
contactor line run.
Another use for control modules occurs
when the controlling device is only
available as a single pole single-throw
contact necessitating a two wire
control line.
Still another application for control
modules is when start-stop three
wire control is needed.
Control modules also can make it
possible to operate the CLM coil from
its own incoming line at one voltage
while providing the control at a
second, perhaps lower voltage.
Lighting Control
Mechanically and Magnetically Held Lighting contactors, Class CLM
Ordering Information
왘
왘
왘
왘
왘
왘
Selection
Coil Table
Replace *** with a number from the coil table.
Field modification kits see page 16-79.
Factory modifications see page 16-94.
Dimensions see page 16-111 open page 16-128 enclosed.
Wiring Diagrams see page 16-145.
Replacement parts see page 16-158.
60Hz Voltage
Number
24
120
208
240
277
480
600
024
120
208
240
277
480
600
Open and Non-combination Enclosed Contactors
Open Type
Enclosure
NEMA 1
Max
Amp
Rating
20
CONTROL
PRODUCTS
16
30
60
NEMA & General
Purpose Control
100
200
300
400
NEMA 4/4X Stainless Steel
NEMA 12
NEMA 3/3R
General Purpose
Watertight, Dust-tight,
Corrosion Resistant,
304 Stainless Steel
Industrial Use
Weatherproof
Number
of Poles
2
3
4
6
8
10
12
2
3
4
5
6
8
9
10
12
2
3
4
5
6
8
9
10
12
2
3
4
5
2
3
4
5
2
3
2
3
Catalog Number
see table
below
CLM0C02***
CLM0C03***
CLM0C04***
CLM0C05***
CLM0C06***
CLM0C08***
CLM0C09***
CLM0C10***
CLM0C12***
CLM0D02***
CLM0D03***
CLM0D04***
CLM0D05***
CLM0D06***
CLM0D08***
CLM0D09***
CLM0D10***
CLM0D12***
CLM0E02***
CLM0E03***
CLM0E04***
CLM0E05***
CLM0F02***
CLM0F03***
CLM0F04***
CLM0F05***
CLM0G02***
CLM0G03***
CLM0H02***
CLM0H03***
List Price $ Catalog Number
CLM1B02***
CLM1B03***
CLM1B04***
see table CLM1B06***
below
CLM1B08***
CLM1B10***
CLM1B12***
429.00
CLM1C02***
455.00
CLM1C03***
481.00
CLM1C03***
602.00
CLM1C05***
1192.00
CLM1C06***
1296.00
CLM1C08***
1768.00
CLM1C09***
1411.00
CLM1C10***
1926.00
CLM1C12***
830.00
CLM1D02***
864.00
CLM1D03***
1036.00
CLM1D04***
1381.00
CLM1D05***
2016.00
CLM1D06***
2517.00
CLM1D08***
3006.00
CLM1D09***
2726.00
CLM1D10***
3757.00
CLM1D12***
1106.00
CLM1E02***
1174.00
CLM1E03***
1432.00
CLM1E04***
1983.00
CLM1E05***
2725.00
CLM1F02***
2948.00
CLM1F03***
3760.00
CLM1F04***
4858.00
CLM1F05***
4570.00
CLM1G02***
4724.00
CLM1G03***
10936.00
CLM1H02***
12580.00
CLM1H03***
List Price $
438.00
460.00
491.00
610.00
896.00
986.00
1121.00
446.00
471.00
471.00
618.00
1561.00
1666.00
2132.00
1782.00
1782.00
899.00
933.00
1106.00
1450.00
2523.00
3024.00
3505.00
3232.00
4256.00
1260.00
1329.00
1588.00
2139.00
3225.00
3639.00
4449.00
5547.00
5637.00
6189.00
13666.00
15312.00
Catalog Number
CLM2B02***
CLM2B03***
CLM2B04***
CLM2B06***
CLM2B08***
CLM2B10***
CLM2B12***
CLM2C02***
CLM2C03***
CLM2C04***
CLM2C05***
CLM2C06***
CLM2C08***
CLM2C09***
CLM2C10***
CLM2C12***
CLM2D02***
CLM2D03***
CLM2D04***
CLM2D05***
CLM2D06***
CLM2D08***
CLM2D09***
CLM2D10***
CLM2D12***
CLM2E02***
CLM2E03***
CLM2E04***
CLM2E05***
CLM2F02***
CLM2F03***
CLM2F04***
CLM2F05***
CLM2G02***
CLM2G03***
CLM2H02***
CLM2H03***
List Price $
543.00
567.00
592.00
711.00
1102.00
1193.00
1328.00
550.00
575.00
602.00
722.00
1584.00
1688.00
2152.00
1804.00
2310.00
1088.00
1122.00
1295.00
1639.00
2521.00
3022.00
3503.00
3231.00
4254.00
1485.00
1553.00
1811.00
2362.00
3965.00
4380.00
5447.00
6548.00
7533.00
8084.00
15993.00
17638.00
Catalog Number
CLMSB02***
CLMSB03***
CLMSB04***
CLMSB06***
CLMSB08***
CLMSB10***
CLMSB12***
CLMSC02***
CLMSC03***
CLMSC04***
CLMSC05***
—
—
—
—
—
CLMSD02***
CLMSD03***
CLMSD04***
CLMSD05***
—
—
—
—
—
CLMSE02***
CLMSE03***
CLMSE04***
CLMSE05***
CLMSF02***
CLMSF03***
CLMSF04***
CLMSF05***
—
—
—
—
List Price $
1046.00
1067.00
1080.00
1321.00
1533.00
1623.00
1759.00
757.00
783.00
808.00
929.00
—
—
—
—
—
1518.00
1553.00
1967.00
2311.00
—
—
—
—
—
2139.00
2208.00
2708.00
3259.00
4724.00
5138.00
6568.00
7893.00
—
—
—
—
Open 20 Amp Contactors
Max
Amp
Rating
20
Contactors
110–120V Coil 50/60Hz
Number
of Poles
Catalog Number
2
3
4
6
8
10
12
CLM22031
CLM32031
CLM42031
CLM62031
CLM82031
CLM102031
CLM122031
208–240V Coil 50/60Hz
List Price $ Catalog Number
with 2–6-poles will be assembled with all
poles located in the top portion of the contactor.
Contactors with 8–12-poles will be assembled with 6poles in the top portion and the remaining poles in
the bottom portion of the contactor.
16-72
424.00
449.00
469.00
728.00
810.00
900.00
1035.00
CLM22061
CLM32061
CLM42061
CLM62061
CLM82061
CLM102061
CLM122061
265–277V Coil 50/60Hz
List Price $ Catalog Number
424.00
449.00
469.00
728.00
810.00
900.00
1035.00
440–480V Coil 50/60Hz
List Price $ Catalog Number
CLM22071
CLM32071
CLM42071
CLM62071
CLM82071
CLM102071
CLM122071
24
volt coils are not available on 20, 300 and 400 amp
contactor sizes. For 24 volt control of 20 amp contactor
select solid state control module.
For conduit hubs and conversion instructions, see
page 16-87.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
424.00
449.00
469.00
728.00
810.00
900.00
1035.00
CLM22091
CLM32091
CLM42091
CLM62091
CLM82091
CLM102091
CLM122091
List Price $
424.00
449.00
469.00
728.00
810.00
900.00
1035.00
CLM
30 & 60A 6-12-pole can be field assembled.
Order mounting kit 49MCMPMA and the appropriate
number of 2-5 pole contactors.
600 volt coils are not available on 20 amp
contactors.
Discount Schedule NEMA
Lighting Control
Combination Mechanically and Magnetically Held Lighting contactors, Class CLM Selection
Ordering Information
왘
왘
왘
왘
왘
왘
Coil Table
Replace *** with a number from the coil table.
Field modification kits see page 16-79.
Factory modifications see page 16-94.
Dimensions see page 16-128.
Wiring Diagrams see page 16-145.
Replacement parts see page 16-158.
60Hz Voltage
Number
24
120
208
240
277
480
600
024
120
208
240
277
480
600
Combination Lighting Contactors
Enclosure
NEMA 12, NEMA 3/3R
NEMA 4 Painted (thru 100 amps)
NEMA 1
General Purpose
Disconnect
Type
Non-Fusible
Contactor
Amp
Rating
Number
of NO
Poles
20
30
60
100
200
300
20
30
60
Fusible
100
300
20
30
60
100
200
300
Circuit
Breaker
30A
30A
60A
100A
200A
400A
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30A/250V
30A/600V
30A/250V
30A/600V
60A/250V
60A/600V
100A/250V
100A/600V
200A/250V
200A/600V
400A/250V
400A/600V
—
—
—
—
—
—
Circuit
Breaker
Rating Catalog Number List Price $
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20A
30A
60A
100A
200A
300A
CMNB14***
CMNC14***
CMND15***
CMNE16***
CMNF17***
CMNG18***
CMFB10***
CMFB11***
CMFC10***
CMFC11***
CMFD12***
CMFD13***
CMFE14***
CMFE15***
CMFF16***
CMFF17***
CMFG18***
CMFG19***
CMBB14***
CMBC15***
CMBD18***
CMBE18***
CMBF10***
CMBG11***
768.00
784.00
1233.00
2051.00
3990.00
8408.00
793.00
810.00
810.00
827.00
1266.00
1293.00
2137.00
2180.00
4152.00
4186.00
8650.00
8718.00
1077.00
1094.00
1533.00
1533.00
4944.00
10898.00
Catalog Number
Catalog Number
List Price $
CMNB24***
CMNC24***
CMND25***
CMNE26***
CMNF27***
CMNG28***
CMFB20***
CMFB21***
CMFC20***
CMFC21***
CMFD22***
CMFD23***
CMFE24***
CMFE25***
CMFF26***
CMFF27***
CMFG28***
CMFG29***
CMBB24***
CMBC25***
CMBD28***
CMBE28***
CMBF20***
CMBG21***
855.00
991.00
1526.00
2430.00
5057.00
10958.00
880.00
898.00
1016.00
1033.00
1559.00
1586.00
2516.00
2559.00
5203.00
5237.00
11199.00
11269.00
1164.00
1301.00
1826.00
2594.00
5997.00
12793.00
List Price $
CMNBS4***
CMNCS4***
CMNDS5***
CMNES6***
CMNFS7***
CMNGS8***
CMFBS0***
CMFBS1***
CMFCS0***
CMFCS1***
CMFDS2***
CMFDS3***
CMFES4***
CMFES5***
CMFFS6***
CMFFS7***
CMFGS8***
CMFGS9***
CMBBS4***
CMBCS5***
CMBDS8***
CMBES8***
CMBFS0***
CMBGS1***
1486.00
1612.00
2507.00
4272.00
6849.00
15662.00
1512.00
1529.00
1637.00
1654.00
2542.00
2567.00
4359.00
4403.00
6996.00
7030.00
15903.00
15972.00
1796.00
1922.00
2809.00
4437.00
7788.00
18151.00
NEMA & General
Purpose Control
Lighting & Heating Contactor Ratings CLM
Maximum AC/DC Voltage and
Amp Ratings
Load
Type
Poles to Load
Amperes
2 for 1-Phase
Continuous 1 for 1-Phase 3 for 3-Phase
Tungsten
Ballast
General
General
20
20
30
20
250V AC
347V AC
347V AC
125V DC
250V AC
600V AC
600V AC
250V DC
Contactor Ratings
Load
Amperes
Max Volts
Type
Continuous Line to Line
Tungsten
Ballast
Heating
30-400
30-400
30-400
480
600
600
Max Volts
Line to Neutral
277
346
346
Inrush Current Over Fuse Size (amps RMS)
at AC Control Voltage 20A CLM
Amps
Inrush
Fuse
120V
5.0
2.0
240V
2.5
1.0
277V
2.2
1.0
24
347V
1.8
0.75
Inrush VA
Dropout VA
20
30
60
60
100/200
100/200
300/400
625
410
410
600
900
1300
1600
6
40
40
40
200
130
550
480V
1.3
0.5
volt coils are not available on 20 and 300 amp
contactors. Use solid state control module on 20 amp
size.
Discount Schedule NEMA
AC Coil Data
Contactor
Amperes
No. Poles
2-12
2-5
2-3
4-5
2-3
4-5
2-3
For
conduit hubs and conversion instructions, see
page 16-87.
CONTROL
PRODUCTS
200
Disc Amp/
Fuse Clip
Rating
Watertight, Dust-tight,
Corrosion Resistant,
304 Stainless Steel
16
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Disc
Amp
Rating
NEMA 4/4X Stainless Steel
Industrial Use
Weatherproof, Watertight, Dust-tight
600
volt coils are not available on 20 amp
contactors.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-73
Industrial Control Power Transformers
Class MT
General
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Features
▪ Epoxy-encapsulated (50–5000VA);
Completely seals the transformer coils
against moisture, dust, dirt and
industrial contaminants for maximum
protection in hostile and industrial
environments
▪ Fuse clips (most models). Factory
mounted for integral fusing on the
secondary side to save panel space,
save wiring time and save the cost
of buying an add-on fuse block or kit
▪ Integrally molded barriers. Between
terminals and transformer, protect
against electrical creepage. Up to 30%
greater terminal contact area permits
low-loss connections. Extra-deep barriers reduce the chance of shorts from
frayed leads or careless wiring
▪ Terminals. Molded into the
transformer, are difficult to break during wiring. A full quarter-inch of
thread on the 10-32 terminal screws
prevents stripping and pullout
▪ Jumpers supplied. Two jumper links
are standard with all transformers
which can be wired for dual primary
voltages
Operation
Industrial control circuits and motor
control loads typically require more
current when they are initially energized
than under normal operating conditions.
This period of high current demand,
referred to as inrush, may be as great
as ten times the current required under
steady state (normal) operating
conditions, and can last up to 40
milliseconds. A transformer in a circuit
subject to inrush will typically attempt
to provide the load with the required
current during the inrush period.
However, it will be at
the expense of the secondary voltage
stability by allowing the voltage to
the load to decrease as the current
increases. This period of secondary
voltage instability, resulting from
increased current, can be of such
magnitude that the transformer is
unable to supply sufficient voltage to
energize the load. The transformer
must therefore be designed and
constructed to accommodate the high
inrush current, while maintaining
secondary voltage stability. According
to NEMA standards, the secondary
voltage would typically be
at 85% of the rated voltage.
16-74
Industrial Control Power Transformers
are specifically designed and built to
provide adequate voltage to the load
while accommodating the high current
levels present at inrush. These
transformers deliver excellent
secondary voltage regulation and meet
or exceed the standards established
by NEMA, ANSI, UL and CSA. Their
rugged construction and excellent
electrical characteristics ensure reliable
operation of electromagnetic devices
and trouble-free performance.
Specifications
▪ Laminations are built with silicon
steel to minimize core losses and
to increase optimum performance
and efficiency
▪ Copper magnet wire of the highest
quality assures efficient operation
▪ Factory mounted type “K” fuse
clips are standard on all secondary
transformers where possible
▪ Two jumper links are standard with
all transformers which can be wired
for dual primary voltages
▪ UL listed and CSA certified
▪ 50/60 Hz rated
▪ Insulation materials are of the
highest rating available for the
temperature class
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
▪ Mounting brackets are heavy
gauge steel to add strength to core
construction and provide stable
mounting. Slotted mounting feet
permit easy installation
▪ Attractive black finish; easy-to-read
nameplate with complete rating data
and wiring diagram
▪ Class 105°C (221°F) insulation
system. 55°C (131°F) temperature
rise. (50 – 750VA typical)
▪ Class 180°C (356°F) insulation
system. 120°C (248°F) temperature
rise. (1000 – 5000VA typical)
▪ Optional field mounted 2-pole
primary Class CC fuse block is
available
Industrial Control Power Transformers
Class MTG
General
the covers prevent contact with current carrying parts on
the transformer and are available for 4 terminal configurations.
The international fuse block kits have inherent touch
safe terminals and fuse clips.
Siemens Meets International Standards
CSA (Canadian Standards Association) was utilized as a
Competent Body in reviewing, interpreting and properly
complying with the requirements of IEC-742 to place a CE
mark on its MTG Series product. As a National Certification
Body, CSA also has the proper documentation and reports
on file for MTG Series to utilize the CB Scheme ensuring
acceptance throughout the world.
The standard Siemens MTG product is available with terminal
covers which meets the requirements of IEC-529, IP20
degree of protection and meets the applicable requirements
for covers per IEC-742.
Features
The IP specification which most closely approximates
protection to a human finger is IP20. This IP rating would
be the most common degree of touch-proof connection
for electrical components such as transformers.
EN 61 558
The requirements for industrial control transformers to be
used in the European Common Market are identified
by the IEC and specified in EN 61 558, Safety of Power
Control Transformers, under Low Voltage Directive 73/23/EEC.
CE mark on the product indicates compliance.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-75
NEMA & General
Purpose Control
IEC-529
The requirements for finger-safe or touch-proof electrical
connections are identified by the International Electrotechnical
Commission (IEC) under specification 529, Classification of
Degrees of Protection Provided by Enclosures. These various
degrees of protection are identified and differentiated by IP
ratings.
CONTROL
PRODUCTS
▪ Winding to winding insulation requirements may be twice
that for IEC-742 compared to UL506
▪ The electrical clearances between current carrying parts
are one-third greater to comply with IEC-742 requirements
for units up to 250VA with voltages up to 440 volts ac
▪ Transformers manufactured to IEC-742 requirements
will have a minimum of 10% higher overload capacity
than those manufactured only to UL506 requirements
While no requirement exists in IEC-742 for the electrical
connections to be either finger safe or touch proof, the
specification does state that IF a transformer is supplied
with a cover to prevent incidental contact with current
carrying parts, that cover must utilize two separate methods
or places of securing it to the component, with neither being
dependent upon the other. Additionally, one of these methods
MUST require a tool to remove it.
16
▪ Class MTG Industrial Control Transformers are 100%
certified for all domestic and International Applications
▪ The MTG line has full compliance with IEC Safety
standards EN 61 558
▪ CE Mark in accordance with requirements for EN 61 558
▪ Meets IP-20 specifications per IEC 529 for finger-safe
protection when used with Siemens Touch Safe snap
on terminal cover kits. Meets IP-00 specifications when
covers are not used.
▪ UL Listed (File # E46323)
▪ CSA Certified (File #LR27533)
▪ Exceeds applicable requirements for control transformers as
determined by NEMA and ANSI
▪ Insulation requirements is twice that of UL506
▪ Proven Epoxy-encapsulated coils operate cooler and
completely seal the transformer coils against moisture,
dust, dirt and industrial contaminants for maximum
protection in hostile and industrial environments
▪ Available in 50 to 750 VA sizes, in all standard voltage
combinations
▪ Class 105°C (221°F) insulation system. 55°C (131°F)
temperature rise. (50 –750VA typical)
▪ Class 180°C (356°F) insulation system. 120°C (248°F)
temperature rise. (1000–5000VA typical)
▪ Primary and secondary fusing capability available as field
installed kits for domestic or international fusing
▪ Integrally-molded terminals and barriers between terminals
make breakage virtually impossible during wiring. The MTG
transformer construction is the same as our high quality
Class MT transformers
Optional Field Installed Fuse Clip Kits For Panel Mounting
▪ 2-Pole primary Class CC fuse block
13
1
▪ 1-Pole secondary midget fuse block for ⁄32 ҂ 1 ⁄2 fuses
▪ 2-Pole primary international type fuse blocks
▪ 1-Pole secondary international type fuse blocks
Optional Touch-Safe Snap-On Terminal Cover Kits
The Touch-Safe terminal covers are designed to comply
with IEC 742 and IP 20 requirements. When installed,
IEC-742
The requirements for industrial control circuit transformers
to be used in the European Common Market are identified
by the International Electrotechnical Commission (IEC) and
specified under IEC-742, Non-Short Circuit Proof Isolating
Transformers, under the Low Voltage Directive 73/23/EEC.
Manufacturers of control transformers indicate compliance
with these requirements by placing a CE mark on the
product.
Industrial Control Power Transformers
Class MT, MTG
Transformer Selection Process
Selecting a transformer for industrial
control circuit applications requires
knowledge of the following terms:
Inrush VA is the product of load voltage (V) multiplied by the current (A) that
is required during circuit start-up. It
is calculated by adding the inrush VA
requirements of all devices (contactors,
timers, relays, pilot lights, solenoids,
etc.), which will be energized together.
Inrush VA requirements are best
obtained from the component
manufacturer.
16
Primary Voltage is the voltage available from the electrical distribution system and its operational frequency,
which is connected to the transformer
supply voltage terminals.
CONTROL
PRODUCTS
Sealed VA is the product of load
voltage (V) multiplied by the current (A)
that is required to operate the circuit
after initial start-up or under normal
operating conditions. It is calculated by
adding the sealed VA requirements of
all electrical components of the circuit
that will be energized at any given
time. Sealed VA requirements are
best obtained from the component
manufacturer. Sealed VA is also referred
to as steady state VA.
Secondary Voltage is the voltage
required for load operation which is
connected to the transformer load
voltage terminals.
General
Once the circuit variables have been determined, transformer selection is a simple
5-step process as follows:
1. Determine the Application Inrush VA by using the following industry accepted formula:
——————————–
Application Inrush VA = √(Inrush VA)2 ѿ (Sealed VA)2
2. Refer to the Regulation Data Chart. If the primary voltage is basically stable and
does not vary by more than 5% from nominal, the 90% secondary voltage column
should be used. If the primary voltage varies between 5% and 10% of nominal,
the 95% secondary voltage column should be used.
3. After determining the proper secondary voltage column, read down until a value
equal to or greater than the Application Inrush VA is found. In no case should a
figure less than the Application Inrush VA be used.
4. Read left to the Transformer VA Rating column to determine the proper
transformer for this application. As a final check, make sure that the Transformer
VA Rating is equal to or greater than the total sealed requirements. If not, select
a transformer with a VA rating equal to or greater than the total sealed VA.
5. Refer to the following pages to determine the proper catalog number based
on the transformer VA, and primary and secondary voltage requirements.
Regulation Data Chart
Transformer
VA Ratings
Inrush VA At 20% Power Factor
NEMA/IEC
NEMA/IEC
95% Sec
90% Sec
Voltage
Voltage
NEMA/IEC
85% Sec
Voltage
25
50
75
100
150
200
250
300
350
500
750
1000
1000
1500
2000
3000
5000
100/–––
170/190
310/350
370/410
780/860
810/900
1400/1540
1900/2090
3100/3410
4000/4400
8300/9130
15000/–––
9000/–––
10500/–––
17000/–––
24000/–––
55000/–––
150/–––
240/270
540/600
730/810
1150/1270
1450/1600
2300/2530
3850/4240
4800/5280
7000/7700
14000/15400
27000/–––
18500/–––
205000/–––
34000/–––
47500/–––
115000/–––
130/–––
200/220
410/460
540/600
930/1030
1150/1270
1900/2090
2700/2970
3650/4020
5300/5830
11000/12100
21000/–––
13000/–––
15000/–––
25500/–––
36000/–––
92500/–––
NEMA & General
Purpose Control
To comply with NEMA standards, which require all magnetic devices to operate successfully at 85% of rated voltage, the
90% secondary voltage column is most often used in selecting a transformer.
For
For
units with Class 105°C insulation systems.
units with Class 180°C insulation systems.
Fuse Clip Kit KCCFPX2R
Primary Fuse Kit
In addition to factory installed secondary fusing, Siemens offers a primary
fuse kit for class MT transformers size
50–750 VA for field installation. The
primary fuse kit includes a 2-pole Class
CC fuse block, instructions and all
associated mounting and wiring
hardware. Additionally, this fuse kit
will fit most competitors’ units. To
order this kit, use catalog number
KCCFPX2R. The primary fuse kit,
when installed, will add a maximum of
0.69 in. (18 mm) to the transformer “A”
dimension and 1.94 in. (49 mm) to the
“C” dimension.
16-76
Primary Fuse Kit Installation—Class MT Transformer with Primary Fuse Kit, KCCFPX2R
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Industrial Control Power Transformers
Domestic, Class MT
Selection
Ordering Information
왘
왘
왘
왘
Use the Voltage Table to determine the
primary and secondary voltage required.
Field Modifications see page 16-79.
Dimensions see page 16-113.
Wiring Diagrams see page 16-147.
Voltage Letter
A
MT0050A
MT0075A
MT0100A
MT0150A
MT0200A
MT0250A
MT0300A
MT0350A
MT0500A
MT0750A
MT1000A
MT1500A
MT2000A
MT3000A
MT5000A
List Price $
46.00
55.00
62.00
66.00
82.00
96.00
105.00
113.00
139.00
192.00
234.00
333.00
405.00
563.00
945.00
Voltage Letter
G
Catalog No
50
75
100
150
200
250
300
350
500
750
1000
1500
2000
3000
5000
MT0050G
MT0075G
MT0100G
MT0150G
MT0200G
MT0250G
MT0300G
MT0350G
MT0500G
MT0750G
MT1000G
MT1500G
MT2000G
MT3000G
MT5000G
Voltage Letter
C
List Price $
MT0050B
MT0075B
MT0100B
MT0150B
MT0200B
MT0250B
MT0300B
MT0350B
MT0500B
MT0750B
—
—
—
—
—
54.00
65.00
71.00
91.00
116.00
136.00
143.00
150.00
188.00
168.00
—
—
—
—
—
75.00
80.00
84.00
108.00
140.00
148.00
173.00
182.00
203.00
281.00
332.00
430.00
574.00
718.00
1149.00
Includes
A 2-pole
Catalog No
secondary fuse clip on sizes 50–750VA.
primary Class CC fuse kit is available for field
installation. See page 16-79 for details. Catalog
Number: KCCFPX2R.
Discount Schedule NEMA
54.00
65.00
71.00
91.00
116.00
136.00
143.00
150.00
188.00
—
—
—
—
—
—
Voltage Letter
I
List Price $
MT0050H
MT0075H
MT0100H
MT0150H
MT0200H
MT0250H
MT0300H
MT0350H
MT0500H
MT0750H
MT1000H
MT1500H
MT2000H
MT3000H
MT5000H
List Price $
MT0050C
MT0075C
MT0100C
MT0150C
MT0200C
MT0250C
MT0300C
MT0350C
MT0500C
—
—
—
—
—
—
Voltage Letter
H
List Price $
Catalog No
Voltage Letter
D
75.00
80.00
84.00
108.00
140.00
148.00
173.00
—
203.00
281.00
332.00
430.00
574.00
718.00
1149.00
Catalog No
MT0050I
MT0075I
MT0100I
MT0150I
MT0200I
MT0250I
MT0300I
MT0350I
MT0500I
MT0750I
MT1000I
MT1500I
MT2000I
MT3000I
—
Catalog No
Voltage Letter
E
List Price $
MT0050D
MT0075D
MT0100D
MT0150D
MT0200D
MT0250D
MT0300D
MT0350D
MT0500D
—
—
—
—
—
—
54.00
65.00
71.00
91.00
116.00
136.00
143.00
150.00
188.00
—
—
—
—
—
—
Voltage Letter
J
List Price $
54.00
65.00
71.00
91.00
116.00
136.00
143.00
150.00
188.00
236.00
332.00
374.00
574.00
718.00
—
Catalog No
List Price $
MT0050E
MT0075E
MT0100E
MT0150E
MT0200E
MT0250E
MT0300E
MT0350E
MT0500E
MT0750E
MT1000E
—
—
—
—
75.00
80.00
84.00
108.00
140.00
148.00
173.00
182.00
203.00
—
—
—
—
—
—
Catalog No
MT0050L
—
MT0100L
MT0150L
—
MT0250L
—
MT0350L
MT0500L
MT0750L
—
—
—
—
—
A
B
C
D
E
F
G
H
I
J
L
M
Voltage Letter
F
54.00
63.00
66.00
79.00
98.00
121.00
143.00
153.00
163.00
186.00
288.00
—
—
—
—
Voltage Letter
L
List Price $
MT0050J
MT0075J
MT0100J
MT0150J
MT0200J
MT0250J
MT0300J
MT0350J
MT0500J
—
—
—
—
—
—
Catalog No
Letter
Catalog No
List Price $
MT0050F
MT0075F
MT0100F
MT0150F
MT0200F
MT0250F
MT0300F
MT0350F
MT0500F
MT0750F
—
—
—
—
—
54.00
57.00
66.00
79.00
98.00
121.00
143.00
151.00
163.00
172.00
—
—
—
—
—
Voltage Letter
M
List Price $
77.00
—
86.00
113.00
—
153.00
—
188.00
211.00
293.00
—
—
—
—
—
Catalog No
MT0050M
MT0075M
MT0100M
MT0150M
MT0200M
MT0250M
MT0300M
MT0350M
MT0500M
MT0750M
—
—
—
—
—
List Price $
77.00
82.00
86.00
113.00
145.00
153.00
180.00
188.00
211.00
293.00
—
—
—
—
—
Includes secondary fuse clip on sizes 50–500VA.
Does not include secondary fuse clip on any size.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-77
NEMA & General
Purpose Control
VA
Rating
Catalog No
Secondary Volts
120/115/110
24
24
24
110/115/120
120
115
95/115
110 X 220
24 X 115, 23 X 110, 25 X 120
99/120/130, 95/115/125,
91/110/120, 85/100/110
120 X 240
CONTROL
PRODUCTS
Catalog No
50
75
100
150
200
250
300
350
500
750
1000
1500
2000
3000
5000
Voltage Letter
B
Primary Volts 50/60 Hz
240 X 480, 230 X 460, 220 X 440
240 X 480
120 X 240
115 X 230
550/575/600
208/277
208/230/460
230/460/575
380/400/415
208/230/460, 200/220/440,240/480
240/416/480/600, 230/400/460/575,
220/380/440/550, 208/500
240 X 480
16
VA
Rating
Voltage Table
Industrial Control Power Transformers
International, Class MTG
Selection
Ordering Information
왘
왘
왘
왘
VA
Rating
Use the Voltage Table to determine
the primary and secondary voltage
required.
Field Modifications see page 16-79.
Dimensions see page 16-113.
Wiring Diagrams see page 16-147.
Voltage Letter
A
Voltage Letter
B
Catalog No
List Price $
Catalog No
MTG0050A
MTG0075A
MTG0100A
MTG0150A
MTG0200A
MTG0250A
MTG0300A
MTG0350A
MTG0500A
MTG0750A
MTG1000A
MTG1500A
MTG2000A
MTG3000A
MTG5000A
62.00
72.00
82.00
87.00
109.00
125.00
141.00
150.00
186.00
257.00
309.00
424.00
475.00
689.00
1033.00
MTG0050B
MTG0075B
MTG0100B
MTG0150B
MTG0200B
MTG0250B
MTG0300B
MTG0350B
MTG0500B
MTG0750B
MTG1000B
—
—
—
—
Voltage Letter
C
List Price $ Catalog No
71.00
86.00
97.00
122.00
155.00
183.00
192.00
218.00
252.00
354.00
460.00
—
—
—
—
MTG0050C
MTG0075C
MTG0100C
MTG0150C
MTG0200C
MTG0250C
MTG0300C
MTG0350C
MTG0500C
MTG0750C
MTG1000C
—
—
—
—
Primary Volts 50/60 Hz
Secondary Volts
240 X 480, 230 X 460, 220 X 440
240 X 480
120 X 240
550/575/600
380/400/415
208/230/460, 200/220/440, 240/480
380
120/115/110
24
24
110/115/120
110 X 220
24 X 115, 23 X 110, 25 X 120
24
Voltage Letter
E
List Price $
Catalog No
71.00
86.00
97.00
122.00
155.00
183.00
192.00
218.00
252.00
354.00
—
—
—
—
—
MTG0050E
MTG0075E
MTG0100E
MTG0150E
MTG0200E
MTG0250E
MTG0300E
MTG0350E
MTG0500E
MTG0750E
—
—
—
—
—
Voltage Letter
I
List Price $ Catalog No
71.00
80.00
87.00
105.00
150.00
187.00
192.00
229.00
252.00
354.00
—
—
—
—
—
MTG0050I
MTG0075I
MTG0100I
MTG0150I
MTG0200I
MTG0250I
MTG0300I
MTG0350I
MTG0500I
MTG0750I
—
—
—
—
—
Letter
A
B
C
E
I
J
P
Voltage Letter
J
Voltage Letter
P
List Price $
Catalog No
List Price $
Catalog No
List Price $
100.00
105.00
110.00
145.00
158.00
200.00
219.00
243.00
272.00
378.00
—
—
—
—
—
MTG0050J
MTG0075J
MTG0100J
MTG0150J
MTG0200J
MTG0250J
MTG0300J
MTG0350J
MTG0500J
MTG0750J
MTG1000J
—
—
—
—
72.00
81.00
110.00
153.00
184.00
193.00
247.00
258.00
272.00
517.00
574.00
—
—
—
—
MTG0050P
MTG0075P
MTG0100P
MTG0150P
MTG0200P
MTG0250P
MTG0300P
MTG0350P
MTG0500P
MTG0750P
—
—
—
—
—
71.00
86.00
97.00
122.00
155.00
183.00
192.00
218.00
252.00
354.00
—
—
—
—
—
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
50
75
100
150
200
250
300
350
500
750
1000
1500
2000
3000
5000
Voltage Table
16-78
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Field Modification Kits
Class SMF, MMS, MRS
Selection
Accessories—Class SMF
Accessories—Class MMS, MRS
Description
Catalog
Number
List
Price $
Handle Guard Kit with Padlock Provision
Emergency Off Actuator
Additional Key for Key Operated Devices
SMFFL1
SMFPB1
SMFFK1
8.60
22.00
2.90
Pilot Light Kits—Class MMS, MRS
Device
Class SMF
Voltage
Rating
115–277V AC
SMFFL1
SMFPB1
SMFFK1
Voltage
Rating
Catalog Number List Price $ Catalog Number List Price $
Device
SMFPL10
110–120V AC
Class MMS 208–277V AC
440–600V AC
26.00
List
Price $
8.60
22.00
2.90
SMFPL10G
26.00
Red
Pilot Light
Green
Pilot Light
Catalog Number List Price $ Catalog Number List Price $
SMFPL11
SMFPL12
SMFPL13
43.00
43.00
43.00
SMFPL11G
SMFPL12G
SMFPL13G
43.00
43.00
43.00
Enclosures—Class MMS
For Use With SMF
Standard Size
NEMA 1
General Purpose
FO1, FO1P, FO2, FO2P, FO3,
FO3P, FO4, FO4P
Oversized
NEMA Type 1
General Purpose
FO1, FO1P, FO2, FO2P, FO3,
FO3P, FO4, FO4P
NEMA 3R, 4, 12
Watertight
Dust-tight
FO1, FO1P, FO2, FO2P, FO3,
FO3P, FO4, FO4P
Catalog
Number
SMFFE2
SMFFE1
SMF40BC1
List
Price $
23.00
26.00
138.00
Nameplates—Class SMF
Enclosure Type
For Use With MMS
Standard Size
NEMA 1
General Purpose
Oversized
NEMA Type 1
General Purpose
Jumbo
NEMA Type 1
General Purpose
NEMA 3R, 4, 12
Watertight
Dust-tight
KO1, KO1P, KO1B, KO2,
KO2A, KO2B, KO3, KO3A,
KO3B, KO4, KO4A, KO4B
KO1, KO2B, KO2C, KO3,
KO3A, KO3B, KO4, KO4B,
KO4C, KO2
KO1, KO2B, KO2C, KO3,
KO3A, KO3B, KO4, KO4B,
KO4C, KO2
KO1, KO2B, KO2C, KO3,
KO3A, KO3B, KO4, KO4B,
KO4C
Catalog
Number
List
Price $
MMSKE3
26.00
MMSKE1
26.00
MMSKE2
51.00
SMF40BC1
138.00
Nameplates—Class MMS
List
Price $
Catalog
Number
Without
Pilot Light
List
Price $
SMFFN2
13.00
—
—
None
SMFFSN3
30.50
SMFFSN4
30.50
NEMA 1
None
surface mounted enclosure High
or gray flush plate
Low
SMFFN30
SMFFN31
SMFFN32
13.00
13.00
13.00
SMFFN40
SMFFN41
SMFFN42
13.00
13.00
13.00
Standard
commercial switch box
cover including
stainless steel plates
NEMA 1
surface mounted
enclosure or
gray flush plate
Nameplate Catalog
Marking
Number
List
Price $
Catalog
Number
List
Price $
None
SMFFN1
13.00
—
—
None
High
Low
Forward
Reverse
SMFFN10
SMFFN11
SMFFN12
SMFFN13
SMFFN14
13.00
13.00
13.00
13.00
13.00
SMFFN20
SMFFN21
SMFFN22
—
SMFFN24
13.00
13.00
13.00
—
13.00
Replacement Parts—Class SMF, MMS
Description
Catalog Number
Replacement Toggle Kits:Type FW and KW (NEMA 4 Metallic Enclosure)
SMFHW1
List
Price $
26.00
Pilot
lights can be field installed on standard NEMA 1
general purpose surface mount enclosures, and
NEMA 3R, 4 and 12 enclosures only.
For flush mounting units a complete switch unit with
pilot light must be ordered.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-79
NEMA & General
Purpose Control
None
For Use On
With
Pilot Light
CONTROL
PRODUCTS
Nameplate Catalog
Marking
Number
With
Pilot Light
16
Without
Pilot Light
Stainless Steel Plate
Handle Guard Kit with Padlock Provision
Emergency Off Actuator
Additional Key for Key Operated Devices
Green
Pilot Light
Enclosure Type
Standard
commercial switch box
cover including
stainless steel plates
Catalog Number
Pilot Light Kits—Class MMS, MRS
Red
Pilot Light
Enclosures—Class SMF
For Use On
Description
Field Modification Kits
Class 11 - 3RV
Selection
Description
Type
Catalog Number
List Price $
1 SPDT contact, NO/NC
1 NO ѿ 1 NC
1 SPDT contact NO/NC electronic contact
1 NO ѿ 1 NC
2 NO
2 NC
2 NO ѿ 2 NC
3RV1901-1D
3RV1901-1E
3RV1901-1G
3RV1901-1A
3RV1901-1B
3RV1901-1C
3RV1901-1J
21.50
26.00
80.00
26.00
26.00
26.00
26.00
1NO + 1NC for any trip
+
1NO + 1NC for short
circuit trip only.
3RV1921-1M
43.00
Auxiliary Contact Blocks
3RV1901-1D
3RV1901-1A
CONTROL
PRODUCTS
16
3RV1912-1CP0
Plug in contact block
1 block per 3RV
mountable at the front
Side mount auxiliary
contact with
screw connection
1 side mount auxiliary
contact per 3RV mountable
on the left-hand side
Signaling Contact Block
Signaling contact
1 signaling contact per 3RV
mountable on the left-hand
side. Can also be fitted
together with side mount
auxiliary contact.
Auxiliary Releases
Undervoltage release
1 undervoltage release
per 3RV mountable on the
right-hand side.
Cannot be fitted together
with shunt trip.
Undervoltage release
with early make contacts (2NO)
1 undervoltage release
per 3RV mountable at
the right-hand side.
Cannot be fitted together
with shunt trip.
Shunt trip
1 shunt trip per 3RV
mountable at the righthand side. Cannot be
fitted together with
undervoltage release.
Pilot Lights
For NEMA 1 enclosure only. Kit
includes Red, Green, and
Amber lenses
3RV1902-1DP0
AC 60Hz
120V
208V
240V
480V
3RV1902-1AF0
3RV1902-1AM1
3RV1902-1AP0
3RV1902-1AV1
66.00
66.00
66.00
66.00
AC 50Hz
230V
415V
AC 60Hz
240V
480V
3RV1922-1CP0
3RV1922-1CV1
83.00
83.00
AC 50Hz/60Hz
20–24V
90–110V
200–240V
350–415V
DC
20–70V
70–190V
190–330V
330–500V
3RV1902-1DB0
3RV1902-1DF0
3RV1902-1DP0
3RV1902-1DV0
66.00
66.00
66.00
66.00
AC 50Hz/60Hz
130.00
130.00
130.00
130.00
130.00
24V
120V
240V
480V
600V
49SBLBJ
49SBLBF
49SBLBG
49SBLBH
49SBLBE
For 3RV with amp range:
0.11-22A up to 480V Max. 0.11-12.5A up to
575V Max
3RV1928-1H
16.00
Four mounting holes required for each 3RV.
3RB1900-0B
1.10
For sealing the FLA
adjustment dial
(Kit includes 10 covers)
3RV1908-0P
2.10
For sealing the front mount
auxiliary opening. (Kit includes 10 covers)
3RV1901-0H
53.00
130 mm depth
3RV1926-0B
104.00
330 mm depth with
supporting bracket
3RV1926-0K
124.00
Lug Kit
Required for Type E Manual
Combination Starter
NEMA & General
Purpose Control
AC 50Hz
—
230V
415V
Mounting
Push-in Mounting Hole Kit
For screw panel mounting
of the 3RV
Sealing device
3RV1928-1H
Adjustment Dial covers
Front mount auxiliary cover
Door Operators
3RV1901-0H
100% on time.
5 sec. max. on time.
Discount Code: PILO.
16-80
Thru-the-door operators
Rotary operating mechanism, rated
NEMA 12, lockable with up to
3 padlocks in the OFF position.
Includes extension shift and
connecting element for the 3RV.
With Black Handle
Compatible
for use in dusty atmospheres. Contacts
rated for 1-300mA @ 3-60V.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Field Modification Kits
Pilot Devices
Push Buttons and
Selector Switches
Selection
Class
Enclosure
Type
Controller Size or
(Lighting Rating)
Open
00-4
00-4 or (20–100A)
49SBPB5
14, 40, LEN, CLM
1
5-8 or (200–400A)
49SBSB1
22, 43
30 (2S1W)
00-8 or (20–400A)
Open
00-4
00-4
1
5-8
12, 4/4X
0-8
Open
0-4
0-1 3⁄4
1
2-4
Open
1
0-4
0-4
12, 4/4X
0-4
17, 18, 36, 37, 83, 84,
LED,LEF, LEB, CMN ,
CMF , CMB
1, 12, 4/4X
0-8 (20-400A)
25, 26
1, 12, 4/4X
0-8
32
1, 12, 4/4X
0-4
30 (2S2W)
Start, Stop Push Buttons
Hand-Off-Auto Selector Switch
Off-On Selector Switch
Start, Stop Push Buttons
Hand-Off-Auto Selector Switch
Off-On Selector Switch
Start, Stop Push Buttons
Hand-Off-Auto Selector Switch
Keyed Hand-Off-Auto (key removable in all positions)
Off-On Selector Switch
Start, Stop Push Buttons
Hand-Off-Auto Selector Switch
Keyed Hand-Off-Auto (key removable in all positions)
Off-On Selector Switch
Forward-Off-Reverse Selector Switch
Forward-Off-Reverse Selector Switch
Forward, Reverse, Stop Push Buttons
Forward-Off-Reverse Selector Switch
Forward, Reverse, Stop Push Buttons
Forward-Off-Reverse Selector Switch
High-Off-Low Selector Switch
High-Off-Low Selector Switch
High, Low, Stop Push Buttons
High-Off-Low Selector Switch
High, Low, Stop Push Buttons
High-Off-Low Selector Switch
High-Off-Low Selector Switch
High-Off-Low Selector Switch
High, Low, Stop Push Buttons
High-Off-Low Selector Switch
Start, Stop Push Buttons
Hand-Off-Auto Selector Switch
Keyed Hand-Off-Auto (key removable in all positions)
Off-On Selector Switch
Forward, Reverse, Stop Push Buttons
Forward-Off-Reverse Selector Switch
High, Low, Stop Push Buttons
High-Off-Low Selector Switch
49SAPB5
49SASB1
49SASB4
49SBPB5
49SBSB1
49SBSB4
49SAP05
49SAS01
49SAS09
49SAS04
49SAP05
49SAS01
49SAS09
49SAS04
49SASB2
49SBSB2
49SAP02
49SAS02
49SAP02
49SAS02
49SASB3
49SBSB3
49SAP03
49SAS03
49SAP03
49SAS03
49SASB3
49SBSB3
49SAP03
49SAS03
49SAP05
49SAS01
49SAS09
49SAS04
49SAP02
49SAS02
49SAP03
49SAS03
List
Price $
69.00
69.00
69.00
69.00
69.00
69.00
69.00
69.00
133.00
69.00
69.00
69.00
133.00
69.00
69.00
69.00
130.00
69.00
130.00
69.00
69.00
69.00
130.00
69.00
130.00
69.00
69.00
69.00
130.00
69.00
69.00
69.00
133.00
69.00
130.00
69.00
130.00
69.00
CONTROL
PRODUCTS
0-4
Catalog
Number
16
12, 4/4X
49SAP05
49SAS01
12, 4/4X
Type
NEMA & General
Purpose Control
To
be used for replacement of switch only. Does not
include relay or extra contact block on 30-400A CLM
and CM Lighting Contactors. Class 49SB not available
for these devices.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-81
Field Modification Kits
NEMA, Lighting and Heating Contactors, 20 Amp CLM, CMB, CMF, CMN
Selection
Solid State Control Module Kits For Lighting and Heating Contactors
CLM 20 Amp
Contactor Kit
Description
120V AC, 50/60 Hz
24V AC/DC,
50/60 Hz
240/277V AC,
50/60 Hz
12V AC/DC,
50/60 Hz
Accessory
47
(2-Wire Control)
(2W)
Catalog
Number
List
Price $
CLM4379771
415.00
CLM4379772
415.00
CLM4379773
415.00
CLM4379774
415.00
Accessory
48
(3-Wire Control)
(3W)
Catalog
Number
List
Price $
CLM4379781
454.00
CLM4379782
454.00
CLM4379783
454.00
CLM4379784
454.00
Accessory
49
(Start/Stop Control)
(3WS)
Catalog
Number
List
Price $
CLM4379791
484.00
CLM4379792
484.00
CLM4379793
484.00
CLM4379794
484.00
Protective Shielding for NEMA Products
!
CONTROL
PRODUCTS
16
NEW
Class 14
Class 40
Class 14, 22, 30, 40, 43
Contactor or
Starter Size
00–13⁄4
Contactor Shield
Catalog Number
Starter Shield
Catalog Number
NEMA & General
Purpose Control
Disconnect with protective shield
List Price $
2–21⁄2
List Price $
3–31⁄2
List Price $
4
List Price $
49PSC1
45.00
49PSC2
52.00
49PSC3
62.00
49PSC4
76.00
49PSS1
52.00
49PSS2
59.00
49PSS3
78.00
49PSS4
83.00
Class 17, 25, 32, 87
Disconnect
Size
Catalog
Number
30A
60 & 100A
200A
49PSD5
49PSD6
49PSD7
List Price $
74.00
79.00
84.00
These
kits are only for use with 20A mechanically held
lighting contactors.
16-82
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Field Modification Kits
Pilot Lights
Description
Selection
Enclosure
Type
Class
1
Controller Size or
(Lighting Rating)
00–4 or (20–200A)
Voltage
Catalog
Number
Red, Green, Amber
ON, RUN, OFF ,
OL TRIPPED ,
FORWARD, REVERSE,
LOW, HIGH
Red
(Transformer Type)
ON
Green
(Transformer Type)
OFF
Red, Green, Amber
ON, RUN, OFF ,
OL TRIPPED ,
FORWARD, REVERSE,
LOW, HIGH
Red
(Transformer Type)
ON
Green
(Transformer Type)
OFF
Red
(Transformer Type)
ON
Green
(Transformer Type)
OFF
24 Vac
120 Vac
208/240/277 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
24 Vac
120 Vac
208/240/277 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
24 Vac (Full Voltage)
120 Vac
240 Vac
480 Vac
600 Vac
49SBLBJ
49SBLBF
49SBLBG
49SBLBH
49SBLBE
49SPL0BRJ
49SPL0BRF
49SPL0BRG
49SPL0BRH
49SPL0BRE
49SPL0AGJ
49SPL0AGF
49SPL0AGG
49SPL0AGH
49SPL0AGE
49SBLBJ
49SBLBF
49SBLBG
49SBLBH
49SBLBE
49SPL0BRJ
49SPL0BRF
49SPL0BRG
49SPL0BRH
49SPL0BRE
49SPL0AGJ
49SPL0AGF
49SPL0AGG
49SPL0AGH
49SPL0AGE
49SPL0BRJ
49SPL0BRF
49SPL0BRG
49SPL0BRH
49SPL0BRE
49SPL0AGJ
49SPL0AGF
49SPL0AGG
49SPL0AGH
49SPL0AGE
Red, Green, Amber
—
—
49SBLBL
14, 40, 22 , 43 ,
30 (2S2W) ,
LEN, CLM
1
5–8 or (300–400A)
12, 4/4X
0–8 or (20–400A)
49SBLBF
1
0–4
30 (2S1W)
1
2–4
12, 4/4X
0–4
49SPL0BRF
17, 18, 25, 26 , 32 ,
36, 37, 83, 84, 87, 88,
LED, LEF, LEB,
CMN, CMF, CMB
Lens Kit ONLY
(30 (2S1W))
1
(14, 40, 22, 43, 30 (2S2W),
LEN, CLM)
”Off”
PL requires: (1) N.C. aux contact, 49AB01 on
sizes 00-4.
Class 22, 25, 26, 30, 32, 43, 83 & 84 requires qty. of (2)
pilot light kits. Does not apply to 49SB kits. Select
Discount Schedule NEMA
0–6 (20–400A)
0–1 3⁄4
00–4 or (20–200A)
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
182.00
182.00
182.00
182.00
182.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
182.00
182.00
182.00
182.00
182.00
130.00
130.00
130.00
130.00
130.00
182.00
182.00
182.00
182.00
182.00
11.20
NEMA & General
Purpose Control
49SBLBL
1, 12, 4/4X
List
Price $
CONTROL
PRODUCTS
Legend(s)
16
Lens Color(s)
appropriate legend plate as a separate item per type
of starter; either “FORWARD” & “REVERSE” or
“LOW” & “HIGH”.
2S2W is starter size 0–4.
Includes NC aux contact for NEMA starter Size 0–4.
“OL TRIPPED” requires (1) N.O. OL aux 49ASNO for
ESP 100 OL relay. Use suffix “91” for amb. comp. OL
size 00-21⁄2. Not available sizes 3-4.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-83
Field Modification Kits
NEMA, Reduced Voltage and Lighting
Selection
Starter/Contactor Auxiliary Contact Kits
Description
Class
Size
14, 17, 18, 22, 25, 26,
30, 32, 36, 37, 40, 43,
83, 84, 87, 88
00-4
14, 17, 18, 22, 25, 26,
36, 37, 40, 43, 87, 88
5, 6
14, 17, 18, 22, 25, 26
40, 43
7, 8
20-60 Amps
LEN, LED, LEF, LEB
100 Amps
200-400 Amps
20 Amps
30-200 Amps
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
CLM, CMN, CMF, CMB
300-400 Amps
Type
1 NO
1 NC
1 NC Early Break
1 NC Late Break
1 NC Extra Late Break
1 NO Extra Late Make
1 NO & 1 NC
2 NO
4 NO
3 NO & 1 NC
2 NO & 2 NC
2 NO
1 NO & 1 NC
2 NC
Catalog Number
49AB10
49AB01
49AB01EB
49AB01LB
49AB01XLB
49AB10XLM
49AB11
49AB20
49AB40
49AB31
49AB22
3RH1921-1EA20
3RH1921-1DA11
3RH1921-1EA02
List Price $
1 NO & 1 NC (Inside L or R)
49CAL18-11
34.00
34.00
51.00
51.00
51.00
51.00
51.00
51.00
103.00
103.00
206.00
206.00
206.00
21.50
21.50
21.50
1 NO & 1 NC (Outside L or R)
49CAL18-11B
1 NO
1 NC
2 NO
1 NO & 1 NC
2 NC
1 NO
1 NC
1 NO/NC SPDT
1 NO/NC SPDT
1 NO/NC SPDT
2 NO/NC SPDT
1 NO & 1 NC
2 NC
2 NO
1 Coil Clearing NO & NC
1 NO & 1 NC
2 NC
2 NO
1 Coil Clearing NO & NC
49ACR0
49ACRC
49ACR7
49ACR6
49ACR8
49D22125001
49D22125002
49CE42SPDT
3RH1921-1DA11
CLM4097291
CLM4097292
CLMFCAK11
CLMFCAK02
CLMFCAK20
CLMFCCK11
CLMHCAK11
CLMHCAK02
CLMHCAK20
CLMHCCK11
Type
Catalog Number
2 NO/2 NC DPDT (NEMA A600)
HA261234
266.00
1 NO/1 NC 240V
1 NO/1 NC 480V
(2) 1 NO/1 NC SPDT-480V
A02ED62
A02FD64
A02JLD64
540.00
540.00
540.00
14.30
14.30
28.50
28.50
28.50
51.00
51.00
51.00
21.50
97.00
193.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
71.00
Disconnect Auxiliary Switch Kits
Disconnect Amp or
CB Rating
Description
Class
Non-fusible
or Fusible Type
17, 25, 32, 37, 83, 84,
30 - 200A
87, 88, LED, LEF, CMN, CMF
MCP
18, 26, 32, 37, 83, 84,
87, 88, LEB, CMB
3A–125A
250A
400A-600A
List Price $
Control Power Transformer Kits
Description
Recommended Transformer Size
Control Size Transformer VA
VA
Rating
Catalog Number
List Price $
0–21⁄2
3–31⁄2
4
5-6
7-8
45 VA
50 VA
100 VA
150 VA
200 VA
300 VA
500 VA
KT*050
KT*050P
KT*100
KT*150
KT*200
KT*300
KT*500
155.00
207.00
216.00
289.00
323.00
398.00
475.00
45 or 50
75
100
150
300
Lighting Control
Transformer
50/60HZ
45VA
CLM
20A, 2 - 12P
30A, 3P
30A, 6 - 12P
60A, 3P
60A, 4 - 6P
60A, 8 - 12P
100/200A, 3P
100/200A, 5P
300/400A, 3P
LEN
20A, 3 - 12P
30/60A, 3 - 6P
30/60A, 9 - 12P
100/200A, 3P
300/400A, 3P
150
100
200
100
150
250
200
250
250
120
208
208
240/480
240/480
277
277
600
600
24
24
120
24
120
24
120
24
120
1
G
H
4
8
5
7
6
9
25
25
50
75
150
transformer kits will include secondary but not
primary fusing. Sizes 50VA and higher include
16-84
Replace * with code from Transformer table. Kits used with NEMA 1
general purpose lift-off cover type require extra wide enclosure.
Class 14 Sizes 0-21⁄2
Class 30 (2S2W) Sizes 0-21⁄2
Class 30 (2S1W) Sizes 0-13⁄4
Transformer Table
Primary Volts Secondary Volts Code
2-pole primary fusing and 1-pole secondary fusing.
Code: IEC.
Discount
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount
Code: MCCB.
Discount Schedule NEMA
Field Modification Kits
NEMA, Reduced Voltage and Lighting
Selection
Miscellaneous Kits
Class
Enclosure
Type
Controller
Size
Catalog
Number
List
Price $
Single Reset (Red)
14, 22, 30
4/4X
00–4
49MARSR
28.50
Single Reset (Blue)
14, 22, 30,
17, 18, 25, 26, 32
1, 12, 4/4X
00–4
49MBRS
25.00
1, 12
—
49MARB
17.90
—
—
49ASRE
14.60
Description
Overload
Resets
Miniature
Universal Reset
ESP100 Reset
Extender
49MBRS
For use in any manufacturer’s
36, 37
enclosure — 8 inches
For use with Siemens MCC’s and
—
other deep enclosures. Attaches to OL devices
Oil Tight
Boot
For Single and Multi Unit
using 49MARSR Resets
—
4, 4X
—
52AABA
16.40
Starter Mounting
Adapter Plate
Fits Allen Bradley 509 and 709,
Westinghouse A200
14
Open
00–1
49D70084
14.60
ESP100
Mounting Plate
ESP100
Mounting Plate Kit
48
Open
00–13⁄4
2–21⁄2
3–4
49ASMP1
49ASMP2
49ASMP3
14.30
14.30
14.30
49ASRFTC
14.60
Furnas Brand Thermal Overload
A, A1 Frame Size
Retrofit Kit, Sizes 0–13⁄4
Overload
Lug Extender
Overload Tamper
Resistant Cover
Replacement Dial Cover
Discount Schedule NEMA
0–1
(9–40A Ranges)
49ASLE
23.00
All
All
0–4
(9–135A Ranges)
49ASTC
(Bag of 10)
29.50
1 Fuse
All
All
49MAFB1
17.90
2 Fuses
All
All
49MAFB2
26.00
2 Fuses
All
All
49MAFB4
26.00
All
All
00–4
49ASDS
(Bag of 10)
29.50
For ESP100 overload without
pass through windows
All
All
00–1 (0.25–10A)
49ASDL
(Bag of 10)
29.50
For ESP100 overload without
pass through windows
48AS, 48CS
All
00–1 (0.25–10A)
49ASMS
14.60
For 13⁄32 11⁄2 Fuses
For Rejection-Type Fuses
For ESP100 overload
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA & General
Purpose Control
Replacement Separate
Mounting Kit (Included
with standard 48AS and
48CS overloads)
All
CONTROL
PRODUCTS
Dust Seal
All
16
Fuse
Block
30A Max
Suitable for Class CC fuses
Includes terminal block and stabs for
connection to contactor terminals to provide connections at bottom of ESP100
overload
Can be closed with wire seal to deter
tampering of ESP100 overload FLA
adjustment dial (Clear cover)
16-85
Field Modification Kits
NEMA, Reduced Voltage and Lighting
Selection
Miscellaneous Kits
Description
Enclosure
Type
Class
Mechanical Interlock
for Horizontally
Mounted Contactors
14, 40
Open
Mechanical Interlock
14, 40
Open
Includes wire &
mounting plate
14, 40
Open
14, 40
Open
All but
Class LE, CLM
All
00–31⁄2
All but
Class LE, CLM
All
00–13⁄4
LEN, LED, LEF, LEB
All
20 Amps
CLM
All
20 Amps
LEN, CLM
Open
All but
Class LE, CLM
Base Plate Only
Includes
mounting plate
(Different Frame Sizes)
Surge Suppressor for 120V AC
coil. Limits transient voltage
produced by the coil to 220%
maximum peak line volts.
NO 36A at 600V AC Max
NC 25A at 600V AC Max
2 NC (mounts to contactor or power pole)
2 NO (mounts to contactor or power pole)
2 NO (mounts to contactor only)
1 NO (mounts to contactor only)
Top or Bottom, 2-Pole
Main Contacts
Top, 3-Pole
Lighting Contactors
Top or Bottom, 4-Pole
Top or Bottom, 6-Pole
CONTROL
PRODUCTS
16
Auxiliary
Power Pole
Load Side
Power Take
Off Kit
Mounting Kit for Open
Heating & Lighting
6 - 12-poles
Includes 3 power lugs
for making extra
connections to the load
side of the contactor
For AL/CU Wire
NEMA & General
Purpose Control
Lug Kit for Contactors
Item
Wire Range
49SAAF
2-14
49SAAH
2/0-14
For AL/CU Wire
75D35994001 250MCM-6
Ground Lug Kit
Meets CSA Standard
22.2 No 14-1973
Right
3, 3 1⁄2
2, 2 1⁄2
61.00
61.00
61.00
77.00
116.00
43.00
357.00
463.00
187.00
213.00
168.00
1342.00
69.00
69.00
69.00
96.00
143.00
49L107944
49L107945
99.00
99.00
49D26344
35.00
49SAF0
49SAFC
96.00
96.00
49LN02A
49LN20A
49LS20A
49LS10A
CLM4097331
CLM4097332
CLM4097333
CLM4097334
101.00
101.00
101.00
101.00
258.00
290.00
355.00
419.00
30, 60 Amp
49MCMPMA
24.00
All
00–13⁄4
49SAE
30.50
14, 40
All
2-21⁄2
3-31⁄2
4
49SAAF
49SAAH
75D35994001
43.00
51.00
89.00
14, 40
All
5, 6
3RT1966-4G
158.00
252.00
626.00
Use CU Only
14, 40
All
7
8
49ATK750-3
49ATK1650-6
1 Conductor 2-14
For AL/CU Wire
All
All
All
49D11960001
8.90
276.00
Lightning Arrestor
Illustration
Catalog Number List Price $
49CCF22H
49EEF22H
49GGF22H
49HHP22H
49JJG22H
3RT1954-2A
3RA1963-2A
3RA1973-2A
3RA1962-2A
3RA1972-2A
49VM750H
49VM1650H
49CCF22HP
49EEF22HP
49GGF22HP
49HHP22HP
49JJG22HP
Open
Wire Kit Only
Auxiliary
Power Pole
00–1
1 3⁄4
2, 2 1⁄2
3, 3 1⁄2
4
5, 6
5
6
5
6
7
8
00–1
1 3⁄4
2, 2 1⁄2
3, 3 1⁄2
4
Left
2, 2 1⁄2
3, 3 1⁄2
14, 40
Includes wire
Interlock Only
Surge
Suppressor
Controller
Size
All
All
All
49D45584002
Backspin Timer
On delay timer that reduces
risk of starting into a
backspin
87, 88
All
All
3RP20 25-1AQ30
3RP20 25-1AP30
64.00
64.00
Hole Plug
Covers the hole that is
typically used for the
conduit hub
87
All
1-4
49D41149006
23.00
Description
Contactor
Wire Size
Catalog Number
List Price $
Lug Kit
1 Kit = 1 Terminal block. 1 kit
necessary for each line and load.
NEMA size 4 (Vacuum)
NEMA size 5
NEMA size 6
2/0 to 600 MCM, max. one 500MCM
& one 600MCM
3RT1966-4G
158.00
3RT1966-4G
Discount Code: IEC.
Surge Suppression for
NEMA sizes 5 – 8 are supplied
internal with the coil. For size 4 panel mount.
16-86
Only
3 lugs are suplied for line or load.
If lugs for line and load are required order 2 kits.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Lug
Kit for contactors include 3 terminals for line or
load.
Discount Schedule NEMA
Field Modification Kits
NEMA, Reduced Voltage and Lighting
Selection
Fused and Non-Fused Disconnect Switch Kits (Includes load base plus line and load fuse
Basic
Switch
Ampere
Rating
Switch
Catalog
Number
Non-Fused
List
Price $
30
HNB612
77.00
60
HNB623
313.00
100
HNB623
200
HNB64
Switch
Catalog
Number
Fused
List
Price $
313.00
HFB21
HFB612
HFB22
HFB62
HFB63
84.00
137.00
141.00
169.00
208.00
327.00
HFB64
447.00
Kit
Description
Load Base
Catalog
Number
Class J
30A, 250V
30A, 600V
60A, 250V
60A, 600V
100A, 250V
100A, 600V
200A, 250V
200A, 600V
—
HBB612
—
HBB62
—
HBB63
—
HBB64
List
Price $
—
81.00
—
97.00
—
176.00
—
256.00
clips)
Load Base
Catalog
Number
Class H
List
Price $
Lug
Wire
Size
HBB21
HBB612
HBB22
HBB62
HBB63
56.00
81.00
83.00
97.00
176.00
#14-2 AWG (Cu/AI)
HBB64
256.00
#6-300 AWG (Cu/AI)
#14-2 AWG (Cu/AI)
#14-1/0 AWG (Cu/AI)
Class R Fuse Conversion Kits
Catalog Number
Description
List Price $
HR21
HR612
HR612
HR62
HR63
HR64
30A, 240V
30A, 600V
60A, 240V
60A, 600V
100A, 240/600V
200A, 240/600V
83.00
83.00
83.00
83.00
54.00
54.00
Hazardous Location Accessories For Enclosure Types 7 & 9
Description
Conduit Size Inches
Install in bottom as drain.
Install in top as breather.
Suitable for Class I groups C & D and
for Class II groups F & G applications only.
for 1⁄2" NPT.
Breather/Drain
51AAHA
51AAHB
51AAHC
51AAHD
51AAHE
51AAHF
4.20
4.60
5.10
8.20
13.80
21.00
For tapered NPT conduit openings.
3
⁄4–1⁄2
1–1⁄2
11⁄2–3⁄4
11⁄2–1
51AARBA
51AARCA
51AARDB
51AARDC
4.20
4.60
10.20
10.20
Cast aluminum, UL Recognized and
CSA Certified. Used to reduce existing
tapered NPT conduit opening when
required.
2 1⁄2–3⁄4
2 1⁄2–1
2 1⁄2–11⁄2
2 1⁄2–2
51AARFB
51AARFC
51AARFD
51AARFE
31.00
29.50
25.50
25.50
Reducer Bushings
3–1
3–11⁄2
3–2
3–21⁄2
51AARGC
51AARGD
51AARGE
51AARGF
41.50
41.50
32.50
32.50
Enclosure
Type
Catalog
Number
List
Price $
49MACML
49MACMD
49MACMN
49MACMF
49MACMG
19.00
21.00
26.00
33.00
72.00
75D41149001
75D41149003
75D41149004
75D41149005
19.00
19.00
19.00
19.00
Conduit Hubs
Conduit
Size
Description
Conduit Hubs For Enclosures
Noncombination - NEMA 12
may be field modified for NEMA 3/3R.
Combination - NEMA 12 may be field
modified for NEMA 3/3R/4 enclosure.
Use UL Listed conduit hub for
the appropriate NEMA type.
NEMA 3R requires the location of the conduit
hub to be at a level above the lowest live part
and holes of 1/8" dia. to be added in the
bottom of the enclosure.
Does not apply to class 87 Pump Panels.
Discount
Discount
Code: PILO.
code: HDSS.
Discount Schedule NEMA
Metal Hub
Metal Hub
3
⁄4"
1"
1 1⁄2"
2"
2 1⁄2"
1"
1 1⁄2"
2"
2 1⁄2"
Class
Controller
Size
All
All
12, 3, 3R, 4
87
All
3R
For
Class R fuses order Class H kit from this table and
the Class R conversion kit.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-87
NEMA & General
Purpose Control
⁄2
⁄4
1
11⁄2
2
21⁄2
3
CONTROL
PRODUCTS
41.00
16
51AADB
1
Hole Plugs
Catalog Number List Price $
Field Modification Kits
NEMA, Overload Relays
Selection
Sirius 3RB20
Illustration
Description
For Overload Type
Catalog Number
List Price $
3RB206
3RU1900-1A
12.80
3RU1900-1B
59.00
3RU1900-1C
64.00
3RB2984-0
6.00
Reset mechanisms
Reset plunger
Mounts directly to overload relay. Requires
separate reset operator in enclosure door. Kit
includes reset plunger, holder and funnel.
Reset plunger with reset button
Cable length
15.75 in (400mm)
Flexible cable reset mechanism
Requires a 6.5 mm hole in the
enclosure with a maximum
enclosure thickness of 8 mm.
3RB206
Cable length
23.62 in (600mm)
Covers
Tamper resistant cover for current setting and
manual/ automatic reset button.
Flexible reset
3RB206
Competitive Retrofit Overload Plates
Manufacturer
NEMA
Size
Plate
Part Number
List Price $
A-B
A-B
Sq. D
0, 1
2
0, 1
49D57090
49D57161
49D57091
15.60
15.60
15.60
Electronic Coil System with Remaining Lifetime Indication and 24VDC PLC Output
Size
5
All
6
Model Type
21 - 27V
Catalog Number
P
V
P
V
–
–
–
–
96 - 127V
Catalog Number
List Price $
List Price $
3RT1965-5PF31
3RT1966-5PF31
3RT1975-5PF31
3RT1976-5PF31
–
–
–
–
575.00
660.00
937.00
958.00
200 - 277V
Catalog Number
List Price $
3RT1965-5PP31
3RT1966-5PP31
3RT1975-5PP31
3RT1976-5PP31
575.00
660.00
937.00
958.00
Overload Auxiliary Contact Kit
Description
Class
Size
All ESP100
00–4
Type
Catalog Number
List Price $
1 NO (NEMA A600)
49ASN0
35.00
1 NC (NEMA A600)
49ASNC
35.00
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Class
Discount
16-88
Code: IEC.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Field Modification Kits
Class MT, MTG
Selection
Fuse Blocks, Touch-Safe Terminal Covers
Catalog Number
International Fusing
Description
List Price $
2-Pole Primary Class CC
Fuse Block for domestic
fusing. Max 600V.(Single- ole cover kits,
if required are listed
below. One cover kit
required per pole.)
Catalog Number
32.00
Description
List Price $
1-Pole Fuse Block,
Touch-Safe. Up to 6.3A
for 5 mm ҂ 20 mm or
5 mm ҂ 25 mm (Requires
DIN Rail Mounting)
7.80
1-Pole Fuse Block,
Touch-Safe 25A, for
10 ҂ 38 mm Cylindrical
Fuses. (Requires DIN
Rail Mounting.)
12.00
2-Pole Fuse Block,
Touch-Safe 25A, for
10 ҂ 38 mm Cylindrical
Fuses. (Requires DIN
Rail Mounting.)
27.00
1-Pole Fuse Block,
Touch-Safe 4-50A, for
14 ҂ 51 mm Cylindrical
Fuses. (Requires DIN
Rail Mounting.)
29.00
Fuse Block DIN Rail
Mounting for separate
screw mounting to panel.
(Max 2-pole 2-25A size
per rail.)
(Max 1-pole 4-50A size
per rail.)
3.80
8WA1011-1SF12
KCCFP2RG
1-Pole Secondary
Midget Fuse Block for
13/32 ҂ 11⁄2 domestic
Fusing. Max 250V.
(Single pole cover kits,
if required are listed
below.)
11.60
3NW7011
13.00
CONTROL
PRODUCTS
3NW7021
KCCFBCK
3NW7111
Snap-On Transformer
Terminal Touch-Safe Cover
Kit. (Includes primary and
secondary covers.)
KTTSC4P
Discount
11.60
8WA1815
Code: IEC.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-89
NEMA & General
Purpose Control
Single Pole Fuse Block
cover Kit for domestic
fuse blocks listed above.
(For primary or secondary)
2-Kits required for 2-pole
fuse block.
16
KCCF1G
Heavy Duty Control
Non-Combination Enclosure Kits, Class 49
49
Class
49 — Field
Kit
E
B
14
E
Selection
B
11
07
05
Reset Installation
Starter Size
E — 00, 0, 1, 13⁄4
G — 2, 21⁄2
I — 3, 31⁄2
J—4
Type
E — Enclosure
Only Model
B — Model
C — 2002
Depth
(In Inches)
R — Reset
Width
(In Inches)
NEMA Type
B — NEMA 1
0 — NEMA 12
W — NEMA 4 S.S.
Product Class
14 — Class 14, 40
22 — Class 22, 43
30 — Class 30
R
Height
(In Inches)
Non-Reversing Starters & Contactors Class 14, 40
General Purpose (Clamshell)
NEMA 4/4X Stainless
Watertight, Dust-tight, Corrosion Resistant
NEMA 12/3/3R
Without CPT
With CPT (Extra Wide)
Without CPT
With CPT (Extra Wide)
Without CPT
Model C Enclosure
Model C Enclosure
Model B Enclosure
Model B Enclosure
NEMA 1
Size
Catalog Number
List
Price $ Catalog Number
00–13⁄4
2, 21⁄2
3, 31⁄2
3, 31⁄2
4
49EC14EB110705R
49EC14GB140807R
49EC14IB201208R
—
49EC14JB251409R
61.00
130.00
235.00
—
361.00
49EC14IB201208R
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14JB251409R
Model B Enclosure
Max
CPT List
VA Price $ Catalog Number
200
200
100
250
300
235.00
235.00
235.00
361.00
361.00
List
Price $
49EB14EW130806R 414.00
49EB14GW160907R 879.00
49EB14JW261408R 1861.00
—
—
49EB14JW261408R 1861.00
Catalog Number
Industrial Use, Weatherproof
Max
CPT List
VA
Price $
49EB22EW131306R
49EB22GW161406R
49EB14JW261408R
—
49EB22JW302410R
689.00
1301.00
1861.00
—
2791.00
With CPT (Extra Wide)
Model B Enclosure
Catalog Number
List
Price $ Catalog Number
49EB14E0130806R
49EB14G0160907R
49EB14J0261408R
—
49EB14J0261408R
224.00
354.00
1102.00
—
1102.00
Max
CPT List
VA
Price $
49EB22E0131306R
49EB22G0161406R
49EB14J0261408R
—
49EB22J0302410R
293.00
603.00
1102.00
—
1326.00
Reversing Starters & Reversing Contactors Class 22, 43
General Purpose (Clamshell)
NEMA 4/4X Stainless
Watertight, Dust-tight, Corrosion Resistant
NEMA 12/3/3R
Without CPT
With CPT (Extra Wide)
Without CPT
With CPT (Extra Wide)
Without CPT
Model C Enclosure
Model C Enclosure
Model B Enclosure
Model B Enclosure
CONTROL
PRODUCTS
16
NEMA 1
Size
Catalog Number
List
Price $ Catalog Number
00–13⁄4
2, 21⁄2
3, 31⁄2
4
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14JB251409R
235.00
235.00
361.00
361.00
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14JB251409R
Model B Enclosure
Max
CPT List
VA Price $ Catalog Number
200
200
250
300
235.00
235.00
361.00
361.00
List
Price $
49EB22EW131306R 689.00
49EB22GW161406R 1301.00
49EB22IW261808R 2791.00
49EB22JW302410R 2791.00
Catalog Number
Industrial Use, Weatherproof
Max
CPT List
VA
Price $
49EB22EW131306R
49EB22GW161406R
49EB22JW302410R
49EB22JW302410R
689.00
1301.00
2791.00
2791.00
Catalog Number
With CPT (Extra Wide)
Model B Enclosure
List
Price $ Catalog Number
49EB22E0131306R 293.00
49EB22G0161406R 603.00
49EB22I0261808R 1326.00
49EB22J0302410R 1326.00
Max
CPT List
VA
Price $
49EB22E0131306R
49EB22G0161406R
49EB22J0302410R
49EB22J0302410R
293.00
603.00
1326.00
1326.00
Two-Speed Two-Winding Starters Class 30
NEMA & General
Purpose Control
NEMA 1
Without CPT
With CPT (Extra Wide)
Model C Enclosure
Model C Enclosure
Size
Catalog Number
List
Price $ Catalog Number
00–13⁄4
2, 21⁄2
3, 31⁄2
4
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14JB251409R
235.00
235.00
361.00
361.00
49EC14JB251409R
49EC14JB251409R
49EB22JB302410R
49EB22JB302410R
NEMA 4/4X Stainless
Watertight, Dust-tight, Corrosion Resistant
NEMA 12/3/3R
Without CPT
With CPT (Extra Wide)
Without CPT
Model B Enclosure
Model B Enclosure
Model B Enclosure
Max
CPT List
VA Price $ Catalog Number
200
200
300
300
361.00
361.00
422.00
422.00
List
Price $
49EB30EW131306R 689.00
49EB30GW161406R 1301.00
49EB30IW261808R 2791.00
49EB22JW302410R 2791.00
Catalog Number
Industrial Use, Weatherproof
Max
CPT List
VA
Price $
49EB30GW161808R
49EB30GW161808R
49EB22JW302410R
49EB22JW302410R
1301.00
1301.00
2791.00
2791.00
With CPT (Extra Wide)
Model B Enclosure
Catalog Number
List
Price $ Catalog Number
49EB30E0131306R
49EB30G0161406R
49EB30I0261808R
49EB22J0302410R
293.00
603.00
1326.00
1326.00
Max
CPT List
VA
Price $
49EB30G0161808R
49EB30G0161808R
49EB22J0302410R
49EB22J0302410R
603.00
603.00
1326.00
1326.00
Two-Speed One-Winding Starters Class 30
General Purpose (Clamshell)
NEMA 4/4X Stainless
Watertight, Dust-tight, Corrosion Resistant
NEMA 12/3/3R
Without CPT
With CPT (Extra Wide)
Without CPT
With CPT (Extra Wide)
Without CPT
Model C Enclosure
Model C Enclosure
Model B Enclosure
Model B Enclosure
NEMA 1
Size
Catalog Number
List
Price $ Catalog Number
00–13⁄4
2, 21⁄2
3, 31⁄2
4
49EC14IB201208R
49EB30GB161808R
49EB30IB192208R
49EB22JB302410R
235.00
422.00
448.00
422.00
49EC14JB251409R
49EB22JB302410R
49EB22JB302410R
49EB22JB302410R
Model B Enclosure
Max
CPT List
VA Price $ Catalog Number
200
300
300
300
Note: Dimensions...See appropriate Product Class
Outline Drawing beginning on page 16-115.
For
conduit hubs and conversion instructions,
see page 16-87.
enclosure suitable for one operating device
and two pilot lights. See Field Mods page 16-79.
Clamshell
16-90
361.00
422.00
422.00
422.00
List
Price $
49EB30EW131306R 689.00
49EB30GW161808R 1301.00
49EB22JW302410R 2791.00
49EB22JW302410R 2791.00
Catalog Number
49EB30GW161808R
49EB22IW261808R
49EB22JW302410R
49EB22JW302410R
Industrial Use, Weatherproof
Max
CPT List
VA
Price $
1301.00
2791.00
2791.00
2791.00
Hinged
cover enclosure suitable for one or more class
52 operating devices and one or more class 52 pilot
lights. See Field Mods page 16-79.
Install NEMA 1 hole plug cat. no. 3SB1902-0AR
(included) when the cover OL reset is not needed.
Install NEMA 12 hole plug cat. no. 52ABH6 (not
included) when the cover OL reset is not needed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
With CPT (Extra Wide)
Model B Enclosure
Catalog Number
List
Price $ Catalog Number
49EB30E0131306R
49EB30G0161808R
49EB22J0302410R
49EB22J0302410R
293.00
603.00
1326.00
1326.00
49EB30G0161808R
49EB22I0261808R
49EB22J0302410R
49EB22J0302410R
Max
CPT List
VA
Price $
603.00
1326.00
1326.00
1326.00
Install
NEMA 4X stainless steel hole plug cat. no.
52ABHS (not included) when the cover OL reset is not
needed.
Discount Schedule NEMA
Heavy Duty Control
Lighting Enclosure Tables
Selection
Lighting & Heating Contactors Class LE
NEMA 4/4X Stainless
NEMA 1
General Purpose (Clamshell)
NEMA 12/3/3R
Watertight, Corrosion Resistant
Industrial Use
Without CPT
With CPT (Extra Wide)
Without CPT
With CPT (Extra Wide)
Without CPT
With CPT (Extra Wide)
Model C Enclosure
Model C Enclosure
Model B Enclosure
Model B Enclosure
Model B Enclosure
Model B Enclosure
Size Pole Catalog Number
List
Price $ Catalog Number
Max
CPT
List
Price $ Catalog Number
List
Price $
Catalog Number
Max List
CPT Price $
Catalog Number
20A
30A
30A
30A
60A
60A
60A
100A
61.00
61.00
235.00
235.00
61.00
235.00
235.00
235.00
200VA
200VA
200VA
250VA
200VA
200VA
250VA
200VA
235.00
235.00
235.00
361.00
235.00
235.00
361.00
235.00
1301.00
1301.00
1861.00
1861.00
1301.00
1861.00
1861.00
1861.00
49EB22GW161406R
49EB22GW161406R
49EB14JW261408R
—
49EB22GW161406R
49EB14JW261408R
—
49EB14JW261408R
—
—
—
—
—
—
—
—
49EB22G0161406R 603.00
49EB22G0161406R 603.00
49EB14J0261408R 1102.00
49EB14J0261408R 1102.00
49EB22G0161406R 603.00
49EB14J0261408R 1102.00
49EB14J0261408R 1102.00
49EB14J0261408R 1102.00
2-12
3
6-9
12
3
6-9
12
3
49EC14EB110705R
49EC14EB110705R
49EC14IB201208R
49EC14IB201208R
49EC14EB110705R
49EC14IB201208R
49EC14IB201208R
49EC14IB201208R
49EC14IB201208R
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14IB201208R
49EC14IB201208R
49EC14JB251409R
49EC14IB201208R
49EB22GW161406R
49EB22GW161406R
49EB14JW261408R
49EB14JW261408R
49EB22GW161406R
49EB14JW261408R
49EB14JW261408R
49EB14JW261408R
1301.00
1301.00
1861.00
—
1301.00
1861.00
—
1861.00
List
Price $
Catalog Number
49EB22G0161406R
49EB22G0161406R
49EB14J0261408R
—
49EB22G0161406R
49EB14J0261408R
—
49EB14J0261408R
Max List
CPT Price $
— 603.00
— 603.00
— 1102.00
— —
— 603.00
— 1102.00
— —
— 1102.00
Lighting & Heating Contactors Class CLM
General Purpose (Clamshell)
NEMA 4/4X Stainless
Watertight, Corrosion Resistant
NEMA 12/3/3R
Without CPT
Without CPT
With CPT (Extra Wide)
Without CPT
Model B Enclosure
Model B Enclosure
NEMA 1
With CPT (Extra Wide)
Model C/B Enclosure
Size Pole Catalog Number
20A
30A
30A
60A
60A
100A
2-12
2-5
6-12
2-5
6-12
2-5
Model C/B Enclosure
List
Price $ Catalog Number
49EC14GB140807R 130.00
49EC14EB110705R 61.00
49EB30GB161808R 422.00
49EC14GB140807R 130.00
49EB30IB192208R 448.00
49EC14IB201208R 235.00
49EC14IB201208R
49EC14IB201208R
49EB30GB161808R
49EC14IB201208R
49EB30IB192208R
49EC14IB201208R
Model B Enclosure
Max
CPT
List
Price $ Catalog Number
200VA
200VA
200VA
200VA
250VA
200VA
235.00
235.00
422.00
235.00
448.00
235.00
List
Price $
Catalog Number
Industrial Use
Max List
CPT Price $
Catalog Number
With CPT (Extra Wide)
Model B Enclosure
List
Price $
Catalog Number
49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R
49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R
49EB30GW161808R 1301.00 49EB30GW161808R — 1301.00 49EB30G0161808R 603.00 49EB30G0161808R
—
—
—
— —
—
—
—
—
—
—
— —
—
—
—
—
—
—
— —
—
—
—
Max List
CPT Price $
—
—
—
—
—
—
603.00
603.00
603.00
—
—
—
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Note: Dimensions...See appropriate Product Class
Outline Drawing beginning on page 16-115.
For
conduit hubs and conversion instructions,
see page 16-87.
enclosure suitable for one operating device
and two pilot lights. See Field Mods page 16-79.
Clamshell
Discount Schedule NEMA
Hinged
cover enclosure suitable for one or more class
52 operating devices and one or more class 52 pilot
lights. See Field Mods page 16-79.
Install NEMA 1 hole plug cat. no. 3SB1902-0AR
(included) when the cover OL reset is not needed.
Install NEMA 12 hole plug cat. no. 52ABH6 (not
included) when the cover OL reset is not needed.
Install
NEMA 4X stainless steel hole plug cat. no.
52ABHS (not included) when the cover OL reset is not
needed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-91
Combination Starter Enclosure Kits
Features and Benefits
Features
▪ Manufactured with a cold forming “TOX” process
▪ 100kA short circuit rating when protected with class R fuses
to 600V or MCP to 480V and when installing listed components
from the instruction guide
▪ Enclosure types available, Nema 1, 12, 3/3R and painted NEMA 4.
Nema 12 field convertible to 3/3R/4 with the appropriate conduit
hub and drain hole
▪ Pre-Drilled mounting panels
▪ Heavy duty quarter turns
▪ Industrial type disconnect handle
Disconnect Type Enclosure Kit
▪ Used to assemble both non-fusible and fusible combination starters
▪ Accommodates Class 14 full voltage non-reversing (FVNR) NEMA
starters 00 – 4 including Siemens exclusive half sizes
▪ Handle mechanism, power wire, mounting panel, reset assembly,
and instruction guide included. Hardware for panel mounted
devices and disconnect switch are not included
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
MCP Type Enclosure Kit
▪ Used to assemble combination starters with circuit breakers
▪ Accommodates Class 14 full voltage non-reversing (FVRN) NEMA
starters 00 – 4 including Siemens exclusive half sizes
▪ Handle mechanism, power wire, mounting panel, reset assembly
and instruction guide included. Circuit breaker not included however,
mounting hardware for the circuit breaker is
How to Select the Required Kits to Assemble a Combination Starter
1. From the catalog, select a class 14 open type starter with the required
starter size and overload relay type.
2. Based on the starter size, select the enclosure kit from table 1a for
fusible or non-fusible combination starters or select from table 1b
for combination starters with an MCP.
3. For a non-fusible combination starter, select the disconnect switch kit from table 2a.
For a fusible combination starter, select the appropriate disconnect switch, fuse clip
kit, and class R rejection kit from table 2b (for H fusing, class R rejection kit not required).
For combination starters with MCP, select the appropriate circuit breaker kit from table 3.
Nomenclature for Combination Enclosure Kits
49
E
C
17
B
B
24
11
08
R
Class
49 — Field Kit
Reset Installation
R — Reset Installed
Type
E — Enclosure Kit
Depth
(In Inches)
Width
(In Inches)
Model
C — Model C
Product Class
17 — Disconnect Type
18 — Circuit Breaker Type
Height
(In Inches)
Enclosure Type
B — NEMA 1
N — NEMA 12/3R, 4 Painted
Disc / CB Amp Rating
B — 30/60 amp disconnect
C — 100 amp disconnect
D— 125 amp breaker frame
E — 150 amp breaker frame
F — 200 amp disconnect
16-92
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Combination Starter Enclosure Kits
Selection
Table 1a - FVNR Combination Starter Kits for use with Disconnect Devices
Starter
Size
0-2
2 1⁄2 - 3
3 1⁄2 - 4
Disc.
Amp
Rating
NEMA 1
Nema 12, 3/3R, 4 Painted 햲
General Purpose
Industrial Use, Weatherproof, Watertight, Dust-tight
Catalog Number
60
100
200
List Price $
Catalog Number
List Price $
292.00
390.00
901.00
49EC17BN241108R
49EC17CN242008R
49EC17FN362408R
334.00
546.00
948.00
49EC17BB241108R
49EC17CB242008R
49EC17FB362408R
Table 1b. – FVNR Combination Starter Kits for use with MCP Devices
Starter
Size
Max
MCP
Amps
0-2
2 1⁄2 - 3
3 1⁄2
4
50
100
125
150
Nema 12, 3/3R, 4 Painted 햲
NEMA 1
General Purpose
Industrial Use, Weatherproof, Watertight, Dust-tight
Catalog Number
List Price $
Catalog Number
List Price $
292.00
390.00
824.00
901.00
49EC18DN241108R
49EC18DN242008R
49EC18DN362408R
49EC18EN362408R
334.00
546.00
877.00
948.00
49EC18DB241108R
49EC18DB242008R
49EC18DB362408R
49EC18EB362408R
Table 2a – Non-Fusible Disconnect Kits
Disconnect Switch
Switch Rating
30A
60A
100A
200A
Catalog Number
List Price $
HNB612
HNB623
HNB623
HNB64
77.00
313.00
313.00
327.00
Table 2b – Fusible Disconnect Kits
Disconnect Switch
Catalog Number
30A-250V
30A-600V
60A-250V
60A-600V
100A-250V
100A-600V
200A-250V
200A-600V
H
H
H
H
H
H
H
H
HFB21
HFB612
HFB22
HFB62
HFB63
HFB63
HFB64
HFB64
Fuse Clip Kit
List Price $
Catalog Number
84.00
137.00
141.00
169.00
208.00
208.00
447.00
447.00
HBB21
HBB612
HBB22
HBB62
HBB63
HBB63
HBB64
HBB64
Rejection Clips for Class R Fusing
List Price $
56.00
81.00
83.00
97.00
176.00
176.00
256.00
256.00
Catalog Number
HR21
HR612
HR612
HR62
HR63
HR63
HR64
HR64
List Price $
83.00
83.00
83.00
83.00
54.00
54.00
54.00
54.00
CONTROL
PRODUCTS
Class
16
Fuse Clip Ratings
Table 3 – Circuit Breaker Kits
MCP Type Used with Solid State
Overload Relay
0
1
1 3⁄4
2
2 1⁄2
3
3 1⁄2
4
햲
Overload
Amp
Range
Motor Circuit
Interrupter
Amps
Circuit
Breaker Kit
Motor Circuit
Interrupter
Amps
Circuit
Breaker Kit
0.75-3
2.5-10
9-18
3
10
25
ED63A003
ED63A010
ED63A025
3
10
25
ED63A003
ED63A010
ED63A025
0.75-3
2.5-10
9-18
13-27
13-27
20-40
13-27
22-45
22-45
30-60
30-60
45-90
57-115
67-135
3
10
25
30
40
50
40
50
50
100
50
100
125
150
ED63A003
ED63A010
ED63A025
ED63A030
ED63A040
ED63A050
ED63A040
ED63A050
ED63A050
ED63A100
ED63A050
ED63A100
ED63A125
FXD63A150L
3
10
25
30
40
50
40
50
50
100
50
100
125
150
ED63A003
ED63A010
ED63A025
ED63A030
ED63A040
ED63A050
ED63A040
ED63A050
ED63A050
ED63A100
ED63A050
ED63A100
ED63A125
FXD63A150L
NEMA & General
Purpose Control
Starter
Size
MCP Type Used with
Thermal Overload Relay
For conduit hubs and conversion instructions,
see page 16-87.
Discount Schedule NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-93
Factory Modifications
Selection
Ordering Information
䊳
䊳
All modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure construction
may not apply when certain modifications and special features are added.
Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAA1.
Pilot Devices
Description
Modification
Class
Enclosure
Type
Push Buttons
Start, Stop
Forward, Reverse, Stop
High, Low , Stop
E-Stop
Test Push Buttons
14, 17, 18, 36, 37, 40, 83, 84, CLM, CM, LE
22, 25, 26, 43
30, 32
14햲 , 17, 18, 22햲 , 25, 26, 30햲 , 32, 36, 37, 40햲 , 43햲
83, 84
14, 17, 18, 36, 37, 40, 83, 84, LE
CM, CLM
All
All햲
All
All햲
All
All
All
For 24 volt HOA control,
20 Amp contactor only
CM, CLM
Off-On
Auto-Off
Forward-Off-Reverse
High-Off-Low
Hand-Off-Auto (Keyed)
Auto-Off-Low-High
Hand-Off-Auto
Selector Switches
Suffix
List Price $
A1
200.햶
A2
360.
ES
K1
A3
A3
271.
200.
200.햶
780.
1
EM
736.
14, 17,18, 22, 25, 26, 30, 32, 36, 37, 40, 43,
83, 84, CLM, CM, LE
All
A4
200.햶
14, 17, 18, 40, 83, 84, CM, CLM, LE
22, 25, 26, 43
30, 32
14, 17, 18, 36, 37, 40, 83, 84, LE, CLM, CM
30, 32
All햲
All
All
All 햲
All햲
A6
200.햶
A5
200.
A9
A0
601.햶
227.
CONTROL
PRODUCTS
16
Pilot Lights
Lens
Color ➔
Red
Legend➔
Suffix ➔
Green
Red
White
Red
Push-To-Test
Green
Push To-Test
OL
Tripped
Control
Power
On
On
For/Rev
Low/High
On
For/Rev
Low/High
Off
FK
FL햵
FW 햲
FS햲
FT 햲
FU햲
315.
315.
315.
215.
273.
273.
375.
315.
315.
315.
215.
548.
548.
375.
Green Red
Green Amber
On
On
For/Rev
For/Rev
Low/High Low/High Run
Run
Off
Off
FA
FB
FC
FD
FJ
215.
Class
Enclosure Type
14, 40, 17, 18, 36, 37, 87,
88, LE, CLM, CM
All
215.
215.
215.
22, 25, 26, 30, 32, 43, 83, 84 All
429.
429.
409.햹 409.햹
Green
Push To-Test
Coil Options
NEMA & General
Purpose Control
Class 14, 17, 18, 22, 25, 26, 30, 32, 40, 43, 83햷 , 84햷 , 87, 88
Controller Size — List Price $
AC (50–60 HZ) or DC
Coil Letter
Change
23–26V
42–48V
110–127V
200–220V
220–240V
240–277V
380–420V
440–480V
575–600V
J
U
F
D
G
L
K
H
E
Volts 60 HZ
Volts 50 HZ
Coil Letter
Change
00–21⁄2
3, 31⁄2
4
24 Separate Control
120 Separate Control
110–120/220–240
200–208
220–240
277
220–240/440–480
440–480
575–600
24
110
110/190–220
—
190–220
240
190–220/380–440
380–440
550
J
F
A
D
G
L
C
H
E
NC
NC
NC
DC Coil 햴
24V
48V
125V
250V
S햸
U
V
W
156.
햲
NC
Miscellenious Options
Not Available on Class 14, 40, 22, 43, 30 (size 00–4) and
Class LE, CLM (20–30amp) NEMA 1 clamshell enclosures.
햳 DC coils include 1 NC, late break aux. contact. This aux.
contact takes up one side of the starter (00–4 only).
16-94
Controller Size 4 (Vacuum Only)
Size 5 & 6 (ALL)
302.
402.
Omit Alternator
(deduct)
Duplex with Separate
Relay Alternation
Duplex with lead pump
transfer switch
햴
햵
Price x 2 for Classes 22, 25, 26, 30, 32, 43, 83, 84.
Bimetal OL - Size 00 - 2 1/2 available. Solid-state OL Size 00 - 4, 7 & 8 available.
햶 For Class 83, 84 two devices are provided. Price x 2.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
햷
햸
햹
Class
Change the
92 to
List
Price $
83, 84
95
222.
83, 84
93
NC
83, 84
94
NC
For Class 83, 84 standard enclosure (92) alternating
relay available in 24V or 120V control only.
S coil is not available for size 4 contactors or starters.
Class 83 and 84 only.
Discount Schedule NEMA
Factory Modifications
Selection
Ordering Information
䊳
䊳
䊳
Transformer Table
Primary
Volts
120
208
208
240
240
277
277
380
415
480
480/240
480/240
600
600
Replace (*) with letter from Transformer Table.
Prices shown are additions to standard equipment prices as listed in the catalog and are not to be used as
separate selling prices. All modifications will consist of Siemens standard components as available. Standard
equipment dimensions and enclosure construction may not apply when certain modifications and special
features are added.
Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number.
Example: 14DSE32BA becomes 14DSE32BABB.
Secondary
Volts
24
24
120
24
120
24
120
110
100
240
24
120
24
120
Letter
B
S
T
J
F
N
P
U
W
R
D
A
E
C
Control Power Transformers
Description
Standard Capacity
with 1-Secondary Fuse
Standard Capacity
with 2-Primary and
1-Secondary Fuse
100VA Extra Capacity
with 2-Primary and
1-Secondary Fuse
150VA Extra Capacity
with 2-Primary and
1-Secondary Fuse
Catalog
No Suffix
B*
D*
C*
C*1
Product
Class
Enclosure 20–60
Type
0–2 1⁄2
14, 17, 18, 22, 25, 26, 30,
32, 40, 43, 83 , 84 , 87
14, 17, 18, 22, 25, 26, 30,
32, 40, 43, 83 , 84 , 87,
LE, CLM, CM
14, 17, 18, 22, 25, 26, 30, 32, 40,
43, 83 , 84 , 87, LE, CLM, CM
36, 37, 88
14, 17, 18, 22, 25, 26, 30, 32, 40,
43, 83 , 84 , 87, LE, CLM, CM
36, 37, 88
1, 3, 4, 12
7&9
247.
284.
100
—
200
300–400
—
—
3
31⁄2, 4
5
6
7
8
—
—
—
—
—
—
—
—
905.
905.
—
—
—
—
1, 3, 4, 12
447.
712.
712.
822.
822.
7&9
484.
753.
753.
868.
868.
1050. 1050.
1, 3, 4, 12
7&9
All
636.
675.
831.
913.
1068.
1082.
913.
1068.
1082.
1004.
1233.
1197.
1004.
1233.
1197.
1095. 1095.
1373. 1373.
—
—
1, 3, 4, 12
795.
1088.
1088.
1179.
1179.
1179. 1179.
All
986.
1288.
1288.
1361.
1361.
—
Lighting & Heating Ratings (Amps)
Motor Controller Size
—
16
Factory Assembled Fuse Clips—Class 25, 32, 84
250
600
250
600
250
600
250
600
250
600
250
600
600
600
Rejection
Clip Suffix
Note: Factory will furnish the same voltage coils as
transformer secondary voltage (except with class
36,37).
The standard control transformer supplied for starter
sizes 0 through 21⁄2 will be rated 45VA and have the
appropriate secondary fuse. Primary fuses will not be
Discount Schedule NEMA
List Price $
10
11
12
13
14
15
16
17
18
19
20
21
23
25
27.
47.
47.
65.
146.
146.
329.
329.
675.
675.
969.
969.
2180.
5449.
supplied as standard. For primary fuse option select
appropriate suffix from table.
ESP100 styles add the rejection clip suffix to the
end of the base style catalog number. For thermal
styles add the rejection clip suffix immediately before
the 81 in the part number.
For
NEMA & General
Purpose Control
30
30
60
60
100
100
200
200
400
400
600
600
800
1600
Volts
CONTROL
PRODUCTS
Fuse
Clip Amps
For Class J fuse clips, add suffix ”DJ”.
Class 84 Duplex Controllers require two
fusible
disconnects thus multiply the price adder by two.
x 2 Class 83 and 84.
Price
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-95
Factory Modifications
Selection
Ordering Information
䊳
䊳
Prices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices. All modifications will
consist of Siemens standard components as available. Standard equipment dimensions and enclosure construction may not apply when certain modifications
and special features are added.
Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAGO1.
Additional Auxiliary Contacts
Class
햴
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
14, 17, 18, 40, 83 , 84
햴
22, 25, 26, 43 &
30, 32 (2-winding)
30, 32
(1-winding)
LE, CLM, CM
CLM, CM
Controller Size — List Price $
NO
Contacts
NC
Contacts
Catalog Number
Suffix
00–13⁄4
2–4
5–6
7–8
—
—
1
2
G01
G02
102.
201.
102.
201.
—
201.
—
—
1
1
1
—
1
2
G10
G11
G12
102.
201.
303.
102.
201.
303.
—
201.
—
—
201.
—
2
2
2
2
—
1
2
3
G20
G21
G22
G23
201.
303.
403.
505.
201.
303.
403.
505.
201.
—
403.
—
—
—
—
—
3
3
3
1
2
3
G31
G32
G33
403.
505.
604.
403.
505.
—
403.
—
—
—
—
—
4
4
4
4
—
1
2
4
G40
G41
G42
G44
403.
505.
604.
806.
403.
505.
—
—
403.
—
—
—
—
—
—
—
5
5
5
—
1
3
G50
G51
G53
505.
604.
806.
505.
—
—
—
—
—
—
—
—
6
6
—
2
G60
G62
604.
806.
—
—
—
—
—
—
7
1
G71
806.
—
—
—
8
—
—
2
G80
G02햲
806.
201.
—
201.
—
—
—
—
2
2
4
4
6
8
0
2
2
4
4
6
8
1
0
2
2
—
2
0
4
2
0
2
—
2
—
4
2
—
1
2
0
2
G20햲
G22햲
G40햲
G44햲
G62햲
G80햲
G02햲
G20햲
G22햲
G40햲
G44햲
G62햲
G80햲
G11
G02햲
G20햲
G22햲
201.
403.
403.
806.
806.
806.
—
—
403.
403.
—
—
—
201.
201.
201.
201.
201.
403.
403.
806.
806.
806.
201.
201.
403.
403.
806.
806.
806.
—
—
—
—
—
403.
403.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Overload Options
Class 14, 17, 18, 22, 25, 26, 30, 32, 36, 37
Description
Ambient
Compensated
Bimetal
ESP100 or
3RB20 (Sz 5-6)
햲 Auxiliary
Trip
Class
Class 10 or 20
(K or E heaters)
Class 10
Class 30
Phase
NO & NC, SPDT
3-Phase or
Single Phase NC
NC
3-Phase
NC
contacts will be added evenly across
contactors. (i.e. Class 22, G02 suffix will add 2 NC
contacts (one per contactor).
16-96
Contacts
Catalog Number
Suffix
Controller Size—List Price $
00–21⁄2
햳
3–4
5, 6
91
54.
—
—
81
51
53
NC
NC
NC
—
NC
NC
—
NC
—
햳 Double the price addition for Class 30 and 32.
햴 For class 83 and 84 contacts will be added to both
starters. Price x 2.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
Factory Modifications
Selection
Ordering Information
䊳
䊳
Prices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices.
All modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure construction
may not apply when certain modifications and special features are added.
Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAA1.
Control Options
Description
Class
Enclosure
Type
Catalog Number
Suffix
List
Price $
Lighting Control Modules
Surge Suppression for 120V AC Coil
Disconnect Switch Interlock 2 NO/2 NC
DPDT
Motor Circuit
NO/NC
SPDT
Protector Interlock
Lightning Arrestor
Circuit Breaker Shunt Trip
Circuit Breaker Undervoltage Trip
Circuit Breaker Alarm Switch Trip
NO alarm aux contact for ESP OL
Ground Lug – 1 Conductor
Control Circuit Fuse and Holder
(Transformer Primary Fusing)
Control Circuit Circuit Breaker
Internally Operated
Space Heater (120V separate control)
Space Heater with Thermostat (120V separate control)
Surge Capacitor
Alarm Package (includes horn, light, relay & push-button)
Backspin Protection
Minimum Run Timer 0.2 sec. - 3 mins.
Blown Fuse Indicator Light
Single Phase 120VAC Combination Starter
Single Phase 240VAC Combination Starter
CLM 20 Amp
14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 83, 84, 87, 88
17, 25, 32, 37, CM, LE
All
All
1, 3, 4, 4X, 12
2W, 3W, 3WS
SS
GY
466. 725. 765.
82.
134.
18, 26, 32, 37, CM, LE
All
GY
264.
All
18, 26, 32, 37, 84, 87, 88, CM, LE
18, 26, 32, 37, 84, 87, 88, CM, LE
18, 26, 32, 37, 84, 87, 88, CM, LE
14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 83, 84, 87, 88
All
All
All
All
All
All
All
All
All
L
L6
L7
L8
L9
L10
F1 (1 fuse)
F2 (2 fuses)
365.
753.
753.
753.
50.
73.
200.
200.
All
All
F4
795.
All
All
87, 88
83, 84, 87, 88
87, 88
87, 88
17, 25, 32, 37, 84, 87, 88, CM, LE
17, 18
17, 18
All
All
All
All
All
All
All
All
All
SH
ST
SC
M7
T5
T6
L11
Z1
Z1
16
639.
686.
439.
1371.
712.
712.
456.
NC
NC
Description
Class
Reversing in one speed only 2 speed 1 winding
Reversing in one speed only 2 speed 2 winding
Reversing in both speeds 2 speed 1 winding
Reversing in both speeds 2 speed 2 winding
Reversing for Reduced Voltage
30, 32
36, 37
Catalog Number
Suffix
R6
R7
R8
R9
R
Controller Size —List Price $
0
1
13⁄4
2
21⁄2
3
31⁄2
4
5
1033.
1000.
1395.
1551.
1240.
1095.
1137.
1607.
1772.
1314.
1335.
1361.
2158.
2518.
1314.
1571.
1602.
2539.
2962.
3597.
1940.
2003.
3213.
3618.
3597.
2281.
2356.
3780.
3617.
8237.
2620.
2702.
4983.
4937.
8237.
3081.
3181.
5862.
5809.
8237.
—
—
—
—
9844.
NEMA & General
Purpose Control
Enclosure Options Class 36, 37
Controller Size — List Price $
Class
Enclosure
Type
Change the 8th
Character of the
Catalog Number to:
0–13⁄4
2, 21⁄2
3
31⁄2, 4
5
6
36
37
37
NEMA 12/3R
NEMA 4 (Painted)
NEMA 4 (Stainless Steel)
N
E
W
913.
1095.
1314.
1142.
1233.
1479.
1371.
1781.
2137.
1826.
2804.
3363.
2466.
5205.
—
3425.
6850.
—
Change the 7th
Character of the
Catalog Number with
Bimetal OL to:
X
X
X
Change the 8th
Character of the
Catalog Number with
ESP OL to:
X
X
X
Enclosure Options Class 14, 17, 18
Class
14
14 (Extra Wide)
17 & 18
Enclosure
Type
NEMA 4/4X (316 Stainless Steel)
NEMA 4/4X (316 Stainless Steel)
NEMA 4/4X (316 Stainless Steel)
Controller Size – List Price Adder $
00–1 3/4
50.
87.
272.
2–2 1/2
165.
87.
272.
3
165.
189.
272.
3 1/2–4
165.
189.
390.
5–8
—
—
—
Note: Add price to the standard 304 stainless steel unit price.
Supplied as NEMA 12, field convertible to NEMA
For bimetal OL, order cat. no. with ”91” suffix.
Specify the single phase voltage when ordering.
Discount Schedule NEMA
3R.
CONTROL
PRODUCTS
Reversing Options
Surge
Suppression for NEMA sizes 5 – 8 are supplied
internal with the coil.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-97
Factory Modifications
Dimensions
Ordering Information
䊳
䊳
Prices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices.
All modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure construction
may not apply when certain modifications and special features are added.
Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAR40.
Control Relays
Description
4 NO
2 NO/2 NC
4 NC
Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (460V)
Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (230V)
Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (575V)
Ground Fault Relay
Electronic On Delay Relay (.15s–100h) 24V/120V
Electronic On Delay Relay (.15s–100h) 24V/240V
Electronic Off Delay Relay (.15s–100s) 120V
Electronic Off Delay Relay (.15s–100s) 240V
24 hour time clock
24 hour time clock with day omission
7 day time clock
Compelling Relay
Acceleration Control
Deceleration Control
Control Relay
4-Poles Max
Class
Enclosure
Type
All
1, 3, 4, 7, 9, 12
Suffix
R40
R22
R04
R1
R2
R4
R5
T1
T2
T3
T4
T7
T8
T9
A6
A7
A8
1, 3, 4, 7 & 9, 12
All
1, 3, 4, 7, 9, 12
LE, CLM, CM
All
30, 32
1, 4, 12
List
Price $
1077.
1007.
536.
1004.
1004.
602.
1371.
CONTROL
PRODUCTS
16
Meters—Mounted on Enclosure
Enclosure
Type
Description
Class
Ammeter (includes a C.T. if necessary)
Ammeter and Switch (3-Phase with 3 C.T.’s)
Voltmeter
Voltmeter and Switch (3-Phase)
Elapsed Time Meter
Wattmeter
14 , 17, 18, 22 ,
1, 12
25, 26, 36, 37, 40 ,
43 , 83, 84
Suffix
List
Price $
M1
M2
M3
M4
M5
M6
1807.
2739.
1807.
2739.
530.
3706.
NEMA & General
Purpose Control
Function Identification Plates
Description
Class
Suffix
Function identification plate, with marking as specified
All
N1
List Price $
89.
Terminal Blocks
Description
Class
3 Point Terminal
6 Point Terminal
9 Point Terminal
Suffix
TC3
TC6
TC9
All
List Price $
219.
439.
658.
Special Ratings
Description
Class
Suffix
Service Entrance Rating
17, 18, 25, 26, 32,
37, 84, 87
N3
Supplied mounted and unwired.
Not available on Class 36, 37.
Price x 2 Class 83 and 84.
16-98
List Price $
237.
ETM available with 120V coil
For terminal point more than
only.
9 terminals use
additional suffixes. Max 3 suffixes can be selected.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Available
3-Phase only.
Discount Schedule NEMA
Manual Control
Class SMF, MMS
Dimensions
Class SMF and MMS Open Type
NEMA Type 3R, 4 and 12
(Top and Bottom)
Class SMF
FO–1, 1P, 2, 2P
(with toggle operator)
Types
Class MMS
KO–1, 1A, 1B, 2, 2B, 2C
(with toggle operator)
Types
NEMA Type 1B General Purpose Flush Mounting
Device
Class
Fractional HP Starter
SMF
Motor Starting Switch
MMS
Type
FWN1, 1P, FWN2, 2P
FWN3, 3P, FW4, 4P
KWN1, 1A, 1B, KWN2, 2B, 2C
KWN3, 3A, 3B, KWN4, 4B, 4C
NEMA Type 4 Watertight Die Cast Zinc Enclosure
Type of
Operator
Dimensions in Inches (mm)
A
B
C
FF1, 1P, 2, 2P
FS1, 1P, 2, 2P
1.44
(37)
1.44
(37)
1.44
(37)
1.44
(37)
1.75
(44)
1.75
(44)
1.75
(44)
1.75
(44)
2.75
(70)
3.50
(89)
2.75
(70)
3.50
(89)
2.75
(70)
3.50
(89)
2.75
(70)
3.50
(89)
4.50
(114)
5.25
(133)
4.50
(114)
5.25
(133)
4.50
(114)
5.25
(133)
4.50
(114)
5.25
(133)
FSJ1P, 2P
Key
FF3, 3P, 4, 4P
FS3, 3P, 4, 4P
FSJ3P, 4P
Class
MMS
Motor
Starting
Switch
Toggle
KF1, 1A, 1B, 2, 2B, 2C
KS1, 1A, 1B, 2, 2B, 2C
KSJ1A, 1B, 2B, 2C
Key
KF3, 3A, 3B, 4, 4B, 4C
KS3, 3A, 3B, 4, 4B, 4C
KSJ3A, 3B, 4B, 4C
Dimensions in Inches (mm)
A
B
C
D
E
F
G
H
I
3.00
(76)
2.75
(70)
1.13
(28)
0.25
(6)
3.75
(95)
4.69
(119)
4.25
(108)
4.56
(116)
0.78
(20)
Device
Class
Type
Fractional HP Starter
Motor Starting Switch
SMF
MMS
FW1, 1P, 2, 2P
KW1, 1A, 1B, 2, 2B, 2C
NEMA & General
Purpose Control
Type
CONTROL
PRODUCTS
Toggle
Class SMF
Fractional
HP Starter
16
Device
NEMA Type 1 General Purpose Surface Mounting Enclosures
Standard Size—Class SMF and MMS
Types FG & KG (Single-Unit)
Note: Dimensions for reference, not for construction.
Dimensions are in inches (mm).
Oversized—Class SMF and MMS
Types FGJ & KGJ (Single-Unit)
Dimensions
1⁄ 2⬙– 3⁄ 4⬙
Jumbo MMSKE2
Knock-Out On Back and Sides
typical for key operator devices.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-99
Manual Control
Class SMF, MMS
Dimensions
NEMA Type 7 and 9 Cast Aluminum Enclosure
Dimensions in Inches (mm)
A
B
C
D
G
H
4.00
(101)
5.75
(146)
1.38
(35)
6.36
(161)
4.38
(111)
1.20
(30)
Device
Class
Type
Fractional HP Starter
Motor Starting Switch
SMF
MMS
FR1, FR2
KR1, KR2
NEMA Type 1 General Purpose Enclosure For Two Unit Devices
Type of
Operator
Class
Type
One Starter and
One Sel. Switch
Toggle
Key
Toggle
Key
Toggle
Key
SMF
SMF
SMF
SMF
SMF
SMF
Reversing Switch
Toggle
MRS
Two Speed Starter
Two Speed Switch
Toggle
Toggle
SMF
MMS
FG02, 02P
FG04P
FG222, 222P
FG44P
FG71, 71P, 72, 72P
FG74P
KG11, 11A, 11B, 22, 22A,
22B, 22C
FG11, 11P, 22, 22P
KG11, 11A, 11B, 22, 22B, 22C
Device
One Starter
CONTROL
PRODUCTS
16
Two Starters
NEMA Type 1B General Purpose Flush Mounting For Two Unit Devices
Device
Type of
Operator
Class
Type
FF22, 22P
NEMA & General
Purpose Control
Toggle
SMF
FS22P
Two
Starters
FF44P
Key
SMF
FS44P
FF71, 71P, 72, 72P
One
Starter
and One
Selector
Switch
Toggle
SMF
FS71P, 72P
FF74P
Key
SMF
FS74P
Reversing
Switch
Two
Speed
Switch
Two
Speed
Switch
A
B
C
D
5.25
(133)
4.56
(116)
5.25
(133)
4.56
(116)
5.25
(133)
4.56
(116)
5.25
(133)
4.56
(116)
3.75
(95)
3.50
(89)
3.75
(95)
3.50
(89)
0.75
(19)
3.50
(89)
3.75
(95)
3.50
(89)
5.25
(133)
4.50
(114)
5.25
(133)
4.50
(114)
5.25
(133)
4.50
(114)
5.25
(133)
4.50
(114)
1.44
(37)
1.44
(37)
1.44
(37)
1.44
(37)
2.00
(51)
2.00
(51)
2.00
(51)
2.00
(51)
Toggle
MRS
KF11, 11A, 11B
KF22, 22A
22B, 22C
5.25
(133)
3.75
(95)
5.25
(133)
1.75
(44)
Toggle
SMF
FF11, 11P, 22, 22P
5.25
(133)
3.75
(95)
5.25
(133)
1.44
(37)
Toggle
MMS
KF11, 11A, 11B
22, 22B, 22C
5.25
(133)
3.75
(95)
5.25
(133)
1.44
(37)
Note: Dimensions for reference, not for construction.
Dimensions are in inches (mm).
Selector
switch is on the left, increases overall depth
to 3.50 in. (89 mm).
one pilot light (located on right) is used on MRS
switches.
Only
16-100
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Dimensions include factory wired power connections.
Selector switch is on the left, extends 1.62 in. (41 mm)
from mounting surface.
Manual Control
Class 11 - 3RV
Dimensions
3RV102
Class 11 - NEMA 7 & 9, 3 & 4, and NEMA 7 & 9
Enclosure
Class 11 - NEMA 1 Enclosure
1/2 NPT
16
1/2 - 3/4 NPT
3/4 - 1 NPT
3/4 NPT
3/8 Mounting Screw
1/2 - 3/4 NPT
1/2 - 3/4 NPT
CONTROL
PRODUCTS
1/2 - 3/4 NPT
9.88
10.20
9.19
8.50
4.63
1/2 - 3/4 NPT
NEMA & General
Purpose Control
8.63
6.06
6.38
7.50
1/2 - 3/4 NPT
6.39
1/4 Mounting Screw
Typ. (3) Places
5.05
3/4 NPT
6.97
5.81
1/2 - 3/4 NPT
3/4 - 1 NPT
.50
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-101
Heavy Duty Motor Starters
Solid State Overload, Class 14
Dimensions
Figure 2
Figure 1
B1
C
C1
D2
C
B1
B
.50
B
.50
D2
C1
L
L
J
A
E
J
A
E
D
D
L
RESET
L
L
L
K
G
E1
M
M1
D1
G
Figure 5
Figure 4
Figure 3
B1
B
B1
C
B
C
C1
D2
C1
E1
D1
B2
M
M1
E2
D2
.50
L3
1
L
A
T1
J
A
D
T2
T3
D
J
L
L
K
M
M1
E1
G
M
M1
D1
E1
K
G
CONTROL
PRODUCTS
16
D1
Open Type Solid State Overload
Outline Dimensions
Reset Dimensions
Size
Figure
A
B
B1
B2
C
C1
D
D1
D2
E
E1
E2
G
J
K
L
M
M1
00–13⁄4
1
7.44
3.50
5.75
—
3.75
3.50
6.50
2.00
0.19
6.27
1.00
—
#10
5.55
—
0.26
3.06
3.22
(189)
(89)
(146)
(95)
(89)
(165)
(51)
(5)
(159)
(25)
(82)
2–21⁄2
2
8.13
3.50
5.75
4.60
4.00
3.77
7.62
2.00
0.19
—
1.00
—
#10
(207)
(89)
(146)
(117)
(102)
(96)
(194)
(51)
(5)
—
3–31⁄2
NEMA & General
Purpose Control
Mounting
Screw
Mounting Dimensions
4
5
6
3
4
5
5
9.78
4.50
6.75
(248)
(114)
(171)
11.06
4.50
6.75
(281)
(114)
(171)
12.76
5.71
6.89
(324)
(145)
(175)
13.03
6.30
7.48
(331)
(160)
(190)
—
—
4.66
5.19
9.22
1.44
0.28
(118)
(132)
(234)
(37)
(7)
4.66
5.75
10.34
1.44
0.44
(118)
(146)
(263)
(37)
(11)
8.54
—
7.09
4.72
—
(180)
(120)
(217)
—
9.29
(236)
—
7.09
5.12
(180)
(130)
(25)
—
0.72
—
(18)
—
—
(7)
(78)
6.67
0.60
0.26
3.28
3.49
(169)
(15)
(7)
(83)
(88)
0.25
8.22
0.60
0.26
3.44
3.64
(6)
(209)
(15)
(7)
(87)
(92)
0.72
0.72
0.25
9.16
0.72
0.26
3.44
3.64
(18)
(18)
(6)
(233)
(18)
(7)
(87)
(92)
—
—
0.35
—
—
—
—
—
—
—
—
—
—
(9)
—
—
—
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
16-102
(141)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
—
0.35
(9)
Heavy Duty Motor Starters & Contactors
Ambient Compensated Bimetal Class 14
Dimensions
Figure 2
Figure 1
C
C1
B1
.50
D2
B1
C
B
D2
C1
CL
CL
J
A
A
D
J
D
3 PHASE
L
G
3 PHASE
L
SINGLE PHASE
M1
M
.50
B
E
SINGLE PHASE
K
M1
M
E
G
Figure 3
D1
Figure 4
B1
B1
B
.50
B
.50
C
C1
C
C1
D2
E1
D2
CL
16
A
J
D
CONTROL
PRODUCTS
J
D
A
L
L
RESET
R E S E T
G
D1
B2
M1
M
G
E
NEMA & General
Purpose Control
M1
M
E
D1
B2
Open Type Ambient Compensated Bimetal Overload
Size
Outline Dimensions
Figure A
B
B1
00–13⁄4 1
2–21⁄2
2
3–3 ⁄
3
4
4
12
7.45
(189)
8.38
(213)
10.66
(271)
12.02
(305)
3.50
(89)
3.50
(89)
4.50
(114)
4.50
(114)
5.75
(146)
5.75
(146)
6.75
(171)
6.75
(171)
C
C1
Mounting Dimensions
D
D1
D2
3.89
(99)
4.00
(102)
5.06
(129)
5.75
(146)
3.50
(89)
3.77
(96)
4.66
(118)
4.66
(118)
6.50
(165)
7.75
(197)
9.25
(235)
10.34
(263)
—
2.00
(51)
1.44
(37)
1.44
(37)
0.19
(4.8)
0.19
(4.8)
0.28
(7)
0.44
(11)
Mounting
Screw
G
E
E1
1.00
(25)
1.00
(25)
0.72
(18)
0.72
(18)
—
#10
—
#10
—
0.25
(6)
0.25
(6)
0.72
(18)
Reset Dimensions
J
K
L
M
M1
5.39
(137)
6.28
(160)
7.81
(198)
8.78
(223)
0.16
(4)
0.16
(4)
0.12
(3)
0.12
(3)
2.97
(75)
3.22
(82)
3.39
(86)
3.63
(92)
2.81
(71)
3.06
(78)
3.27
(83)
3.51
(89)
—
0.36
(9)
—
—
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-103
Reversing & Multispeed Heavy Duty Starters
Solid State Overload Class 22, 30
Dimensions
Figure 1
Figure 2
B1
C
B
C1
Figure 3
B1
B
D1
C
.50
D1
B1
C1
C
C1
B
D1
J
A
D J
A
D
J
L
D
A
A
L
L
K
G
K1
CL
B2
M1
M
E
M1
M
B2
K
L
G
K1
E
K
M1
M
K1
E
Figure 4
Figure 5
B1
B1
B
C
E
D1
G
C
C1
E
C1
D1
J
J
D
A
A
D
L
L
K
K1
M1
M
G
B
G
K1
K
M1
M
Figure 6
Figure 7
B1
B1
C
16
E
C
E
C1
D1
C1
CONTROL
PRODUCTS
D1
-1
L3
J
D
A
J
D
A
L
K
K1
L
M1
M
G
K
B
K1
G
M1
M
NEMA & General
Purpose Control
B
Class 22 Reversing & Class 30 2 Speed/2 Winding
Size
00–13⁄4
2–21⁄2
3– 3 1⁄2
4
Figure
Outline Dimensions
A
B
B1
B2
C
1
2
3
4
7.69
8.94
11.44
11.91
3.62
3.62
—
—
3.61
4.17
5.65
6.22
8.25
8.25
10.94
10.94
10.50
10.50
12.75
12.75
C1
Mounting Dimensions
D
D1
E
Mounting
Screw
Reset Dimensions
G
J
K
K1
L
M
M1
3.92
3.98
5.03
5.11
7.25
8.50
10.75
11.22
#10
#10
#10
0.25
0.26
0.26
0.26
0.21
3.40
3.66
4.12
4.12
3.23
3.45
3.91
3.91
Mounting
Screw
Reset Dimensions
G
J
K
K1
L
M
M1
#10
#10
#10
#10
0.26
0.26
0.26
0.26
3.40
3.50
3.66
3.66
3.23
3.29
3.45
3.45
0.22
0.22
0.34
0.34
7.25
7.25
10.25
10.25
5.77
6.89
8.97
9.32
1.25
0.65
1.53
1.53
4.75
4.75
6.00
6.00
Class 30 2 Speed/1 Winding
Size
00–1 3⁄4
2–2 1⁄2
3–3 1⁄2
4
Figure
Outline Dimensions
A
B
B1
B2
C
C1
Mounting Dimensions
D
D1
E
1
5
6
7
7.69
9.19
11.44
11.91
3.62
—
—
—
3.61
3.94
5.65
6.22
3.92
3.85
5.07
5.12
7.25
8.75
10.75
10.75
8.25
14.55
16.94
16.94
10.50
16.30
18.75
18.75
0.22
0.22
0.34
0.82
7.25
13.00
16.25
16.25
Note: Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Dimensions are in inches (mm).
16-104
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
5.77
7.14
8.97
8.87
1.25
0.65
1.53
1.53
4.75
5.75
6.00
6.00
Reversing & Multispeed Heavy Duty Starters
Ambient Compensated Bimetal Overload Class 22, 30
Dimensions
Figure 1b
Figure 1a
B1
B1
B
.50
CL
.50
CL
B
C
C1
D1
.50
CL
.50
CL
CL
J
C
C1
D1
CL
J
A
A
D
NC
R
E
S
E
T
NC
R
E
S
E
T
M
A
N
T
R
I
P
X2
T1
T2
R
E
S
E
T
T
R
I
P
T1
T2
M
A
N
T
R
I
P
X2
L
T1
T
3
THIS OVERLOAD
USED ON
MULTISPEED
STARTERS ONLY
B2
K1
E
K
NC
R
E
S
E
T
NC
M
A
N
X2
T3
D
T2
I
T2
3
THIS OVERLOAD
USED ON
MULTISPEED
STARTERS ONLY
M1
G
Figure 2
B1
B
E
L
T
B2
K1
E
K
M
T
R
P
T1
T3
M1
G
M
A
N
X2
M
Figure 3
B1
B
E
C
C1
D1
C
C1
D1
.50
L
L
J
J
D
A
D
A
L
RESET
RESET
RESE T
RESE T
L
M1
M
G
K1
K
G
K
M1
M
K1
16
Figure 4
Figure 5
B
B
C
C1
D1
B1
CONTROL
PRODUCTS
B1
C
C1
D1
.50
CL
CL
CL
L
L
J
D
J
A
A
D
NC
L
NC
R
E
S
E
T
R
E
S
E
T
M
A
N
T
R
I
P
X
2
T1
T2
M
A
N
T1
T
3
T2
L
T3
K1
G
E
K1
M1
M
NEMA & General
Purpose Control
K
K
RESET
RESET
T
R
I
P
X
2
M1
M
G
E
Class 22 Reversing & Class 30 2 Speed/2 Winding with Bimetal Overload
Size
Figure
Outline Dimensions
A
B
B1
00–13⁄4
2–21⁄2
3–31⁄2
4
1a
1b
2
3
7.69
8.94
11.44
12.50
8.25
8.25
10.94
10.94
10.50
10.50
12.94
12.75
B2
C
3.62
3.62
—
—
3.92
4.17
5.66
6.22
C1
Mounting
Screw
D
D1
3.61
3.98
5.08
5.16
7.25
8.50
10.75
11.22
0.22
0.22
0.34
0.34
E
Mounting
Dimensions
G
Reset Dimensions
J
K
K1
L
M
M1
7.25
7.25
10.25
10.25
#10
#10
#10
0.25
5.60
6.46
8.56
9.11
4.75
4.75
6.00
6.00
0.16
0.16
0.12
0.12
3.12
3.10
3.83
4.09
3.07
3.05
3.71
3.97
E
Mounting
Dimensions
G
Reset Dimensions
J
K
K1
L
M
M1
7.25
13.00
16.25
#10
0.25
0.25
5.60
6.71
8.56
4.75
5.75
6.00
0.16
0.16
0.12
3.12
3.10
3.83
3.07
3.05
3.71
1.25
0.79
2.12
2.12
Class 30 2 Speed/1 Winding with Bimetal Overload
Size
Figure
Outline Dimensions
A
B
B1
00–13⁄4
2–21⁄2
3–31⁄2
1a
4
5
7.69
9.19
11.44
8.25
14.56
16.94
10.50
16.25
18.75
B2
C
C1
Mounting
Screw
D
D1
3.62
—
—
3.92
4.11
5.66
3.61
3.92
5.08
7.25
8.75
10.75
0.22
0.22
0.34
1.25
0.78
2.12
Note: Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Dimensions are in inches (mm).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-105
Heavy Duty Contactors
Class 40
Dimensions
Full Voltage Open Type NEMA Contactor Size 00-8
Figure 1
Figure 2
CONTROL
PRODUCTS
16
Figure 3
NEMA & General
Purpose Control
Figure 4
Open Type
Mounting
Dimensions
Mounting
Screw
Size
3rd Character Outline Dimensions
of Catalog No. Fig
A
B
B1
B2
C
D
D1
E
G
00–13⁄4
2–21⁄2
3–31⁄2
4
C, D, E
F,G
H, I
J
1
1
1
1
4.31 (110)
4.88 (124)
6.13 (156)
7.81 (198)
3.94 (100)
3.94 (100)
5.13 (130)
5.19 (132)
4.25 (108)
4.25 (108)
5.50 (140)
5.50 (140)
4.75 (121)
—
—
—
3.75 (70)
4.00 (102)
5.06 (129)
5.75 (146)
3.94 (100)
4.50 (114)
5.63 (143)
6.56 (167)
0.19 (5)
0.19 (5)
0.25 (6)
0.81 (21)
1.00 (25)
1.00 (25)
0.75 (19)
0.75 (19)
#10
#10
0.25 (6)
0.5 (13)
5
6
L
M
2
2
N
P
3
4
5.71 (145)
6.3 (160)
8.27 (210)
17.23 (438)
6.89 (175)
7.48 (190)
—
—
—
—
—
—
8.54 (217)
9.29 (236)
9.53 (242)
10.56 (268)
7.09 (180)
7.09 (180)
9.80 (249)
12.28 (312)
4.72 (120)
5.12 (130)
2.83 (72)
—
—
—
—
5.35 (136)
0.35 (9)
0.35 (9)
7
8
8.27 (210)
8.43 (214)
14.05 (357)
15.41 (392)
Note: Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Dimensions are in inches (mm).
16-106
3rd
character of catalog number identifies contactor
rating.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
0.25 (6)
0.35 (9)
Magnetic Reversing Contactors
Class 43
Dimensions
Figure 1
Figure 2
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Open Type Horizontal Mounted
Size
00–13⁄4
2, 21⁄2
3–31⁄2
4
5
6
Fig.
1
1
1
1
2
2
Outline Dimensions
A
B
7.69 (195)
7.75 (197)
8.94 (227)
7.75 (197)
11.44 (291)
10.94 (278)
8.50 (216)
10.94 (278)
18.07 (459)
14.20 (361)
11.61 (295)
18.88 (480)
B1
9.25 (235)
9.25 (235)
11.50 (292)
11.50 (292)
—
9.45 (240)
C
3.88 (98)
4.56 (116)
5.19 (132)
6.25 (159)
9.44 (240)
10.85 (276)
C1
—
—
—
—
—
7.44 (189)
Mounting
Dimensions
D
7.25 (184)
8.5 (216)
10.75 (273)
7.81 (198)
17.20 (437)
10.44 (265)
D1
0.25 (6)
0.25 (6)
0.38 (6)
0.38 (6)
—
10.71 (272)
E
3.63 (92)
3.63 (92)
5.13 (130)
5.13 (130)
9.61 (244)
17.72 (450)
F
—
—
—
—
1.18 (30)
Mouning
Screw
G
#10
#10
0.25
0.25
—
—
Note: Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Dimensions are in inches (mm).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-107
Overload Relays & Current Sensitive Relays
Solid State Overload
Dimensions
Dimensions “A” Frame—ESP100 Solid State Overload
Overload (55 - 630 Amps), SIRIUS 3RB20
Dimensions “A1” Frame—ESP100 Solid State Overload
Dimensions “B” Frame—ESP100 Solid State Overload
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
ESP100 Overload
Motor Lead Windows
ESP100 Overload
Motor Lead Windows
Sizes 2–4
Current Sensitive Relay
Free Standing
Mounting Panel
Note: Dimensions for reference, not for construction.
Dimensions in inches.
16-108
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Overload Relays
Panel Mounted Class 48 — Bimetal
Dimensions
Figure 1
Figure 2
Figure 4
Figure 3
Figure 6
Figure 5
16
Figure 8
Figure 7
CONTROL
PRODUCTS
Reset
Dimensions
C
D
E
J
3 3⁄16 (81)
3 3⁄16 (81)
3 9⁄16 (90)
3 9⁄16 (90)
3 (76)
3 (76)
3 1⁄2 (89)
3 1⁄2 (89)
1
13⁄4 (44)
27⁄16
27⁄16
3 (76)
Mounting
Screw
G
Max
Wire
Size
Approx
Ship Wt
Lbs (Kg)
Ref
Dwg
#10
#10
#10
#10
8
1
00
250 MCM
2 (1)
2 (1)
3 (1)
4 (2)
D51820
D51830
D51833
D52206
Description
Fig
A
1-Pole
Bimetal
Ambient
Compensated
25
60
100
180
1
2
3
4
7
3 1⁄2 (89)
⁄8 (22)
4 7⁄8 (124) 7⁄8 (22)
4 7⁄8 (124) 1 1⁄4 (32)
5 15⁄16 (151) 1 1⁄4 (32)
Description
Amp
Rating
Fig
A
B
C
D
E
J
K
K1
K2
L
3-Pole
Bimetal
Ambient
Compensated
30
60
100
180
5
6
7
8
3 5⁄8 (92)
3 7⁄8 (98)
4 7⁄8 (124)
6 1⁄2 (165)
3 1⁄16 (78)
3 1⁄16 (78)
4 7⁄16 (113)
4 7⁄16 (113)
3 1⁄8 (79)
3 1⁄8 (79)
3 9⁄16 (90)
3 9⁄16 (90)
3 (76)
3 (76)
3 1⁄2 (89)
3 1⁄2 (89)
1 1⁄2 (38)
1 1⁄2 (38)
1 5⁄8 (41)
1 5⁄8 (41)
1 1⁄4 (32)
1 1⁄4 (32)
27⁄16 (62)
3 (76)
1 13⁄16 (46)
1 13⁄16 (46)
9
⁄16 (14)
9
⁄16 (14)
—
—
115⁄16 (49)
115⁄16 (49)
—
—
2 (51)
2 (51)
3
B
⁄2 (13)
⁄2 (13)
9
⁄16 (14)
9
⁄16 (14)
1
Mounting
Dimensions
Outline Dimensions
K
L
3
1
3
1
⁄4 (19)
⁄4 (19)
1
⁄2 (13)
1
⁄2 (13)
⁄8 (3)
⁄8 (3)
1
⁄8 (3)
1
⁄8 (3)
NEMA & General
Purpose Control
Mounting
Dimensions
Outline Dimensions
Amp
Rating
Reset
Dimensions
⁄16 (5)
⁄16 (5)
⁄8 (3)
1
⁄8 (3)
3
1
Mtg
Screw
G
Max
Wire
Size
Approx
Ship Wt Ref
Lbs (Kg) Dwg
#10
#10
#10
#10
8
2
00
250 MCM
3 (1)
3 (1)
4 (2)
5 (2)
D54791
D54823
D51868
D52038
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-109
Lighting & Heating Contactors
Electrically Held, Class LE
Dimensions
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Figure 1
Open Type Lighting and Heating Contactors
Outline Dimensions
Mounting Dimensions
Contact
Rating
Amps
20–30
20–30
20
Poles
2
3
4
Figure
2
2
1
A
3.36
3.97
3.62
B
2
2.25
2.87
B1
—
—
—
B2
—
—
—
C
2.69
2.88
2.88
C1
—
—
—
D
1.63
3.13
3.13
D1
—
3.25
3.25
E
1.63
1.81
1.78
20
20
8
12
3
3
3.62
3.62
—
—
3.71
—
—
4.55
2.88
2.88
2.97
2.97
3.13
3.13
3.25
3.25
1.78
1.78
60
30–60
30–60
100
200
300
400
3
6
9–12
3
3
3
3
2
4
4
6
5
5
5
4.06
3.87
5.25
5.19
6.77
8.27
8.43
2.88
6.15
18.62
4.00
4.72
5.71
6.3
—
—
—
—
5.91
6.89
7.48
—
—
—
—
—
—
—
3.06
3.06
3.31
4.75
7.09
8.54
9.29
—
—
—
—
—
—
—
3.13
3.18
4.62
4.63
5.12
7.09
7.09
3.25
—
—
4.37
3.94
4.72
5.12
2.25
—
18.00
2.88
—
—
—
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
16-110
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Mounting
Screw
#10
#10
#10
#10
#10
#10
#10
0.281
#10
0.28
0.35
0.35
Lighting & Heating Contactors
Mechanically / Magnetically Held Lighting Contractors, Class CLM
Dimensions
CLM Contactor, 20 Amp
Figure 1
Figure 2
Figure 3
G
A
B
C
D
16
F
E
CONTROL
PRODUCTS
Open Type Lighting and Heating Contactors
Class
Amp
Rating
Number of
Poles
A
B
C
D
E
F
G
1
1
2
2
2
2
2
2
3
30
30
60
60
100
100
200
200
30, 60
2–4
5
2, 3
4, 5
2, 3
4, 5
2, 3
4, 5
6-12
3.31 (84)
4.19 (106)
3.31 (84)
5.06 (129)
4.62 (117)
7.25 (184)
4.62 (117)
7.25 (184)
18.62
1.65 (42)
2.09 (53)
1.65 (42)
2.53 (64)
2.31 (59)
3.62 (92)
2.31 (59)
3.62 (92)
0.312
3.95 (100)
3.95 (100)
3.95 (100)
3.95 (100)
6.00 (152)
6.00 (152)
6.00 (152)
6.00 (152)
4.62
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
6.62 (168)
6.62 (168)
6.62 (168)
6.62 (168)
5.25
0.23 (6)
0.23 (6)
0.23 (6)
0.23 (6)
0.38 (10)
0.38 (10)
0.38 (10)
0.38 (10)
0.312
4.61 (117)
4.61 (117)
4.94 (125)
4.94 (125)
6.75 (171)
6.75 (171)
6.75 (171)
6.75 (171)
4.98
1.50 (38)
1.50 (38)
1.50 (38)
1.50 (38)
1.88 (48)
1.88 (48)
1.88 (48)
1.88 (48)
18.00
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-111
NEMA & General
Purpose Control
CLM
Figure
Number
Lighting Control
Mechanically Latched 300 and 400 Amps, Class CLM
CLM Contactors 400 Amp
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
CLM Contactors 300 Amp
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
16-112
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Dimensions
Industrial Control Power Transformers
Class MT
Dimensions
Top View
Side View
Dimension “C” does not include the
added height required for secondary
fuse clips—0.50 in. (13 mm) maximum
for type “K” clips.
The Primary Fuse Kit, when installed, will
add a maximum of 0.69 in. (18 mm) to
the transformer “A” dimension and 1.94
in. (49 mm) to the “C” dimension.
A
2-pole Primary Class CC Fuse Block Kit is available
for field installation. See page 16-74 for details.
Catalog Number KCCFPX2R
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
Class MT
Approximate Dimensions Inches (mm)
VA
Rating
50
75
100
150
300
500
750
1000
1500
2000
3000
5000
B
3.00 (76)
3.00 (76)
3.00 (76)
3.00 (76)
3.38 (86)
3.00 (76)
3.38 (86)
3.38 (86)
3.38 (86)
3.38 (86)
3.38 (86)
3.38 (86)
3.75 (95)
3.38 (86)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
5.25 (133)
4.50 (114)
4.50 (114)
4.50 (114)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
6.75 (171)
5.25 (133)
6.38 (162)
6.38 (162)
6.75 (171)
6.75 (171)
6.75 (171)
6.75 (171)
6.75 (171)
9.00 (229)
9.00 (229)
9.00 (229)
9.00 (229)
9.00 (229)
9.00 (229)
9.00 (229)
C
2.56 (65)
2.56 (65)
3.00 (76)
2.56 (65)
2.88 (73)
2.56 (65)
2.88 (73)
2.88 (73)
2.88 (73)
2.88 (73)
2.88 (73)
2.88 (73)
3.19 (81)
3.19 (81)
3.19 (81)
3.19 (81)
3.19 (81)
3.19 (81)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
3.81 (97)
4.75 (121)
3.81 (97)
3.81 (97)
3.81 (97)
4.75 (121)
4.44 (113)
4.75 (121)
4.75 (121)
4.75 (121)
4.75 (121)
4.44 (113)
4.75 (121)
4.75 (121)
4.75 (121)
5.75 (146)
4.44 (113)
5.38 (137)
5.38 (137)
5.69 (144)
5.69 (144)
5.69 (144)
5.69 (144)
5.69 (144)
7.31 (186)
7.56 (192)
7.56 (192)
7.56 (192)
7.56 (192)
10.19 (259)
10.56 (268)
D
2.00 (51)
2.13 (54)
2.56 (65)
2.25 (57)
2.44 (62)
2.50 (64)
2.38 (60)
2.38 (60)
2.50 (64)
2.38 (60)
2.69 (68)
2.88 (73)
2.50 (64)
3.06 (78)
2.88 (73)
3.06 (78)
3.25 (83)
3.25 (83)
2.88 (73)
2.50 (64)
2.75 (70)
2.75 (70)
3.00 (76)
2.88 (73)
3.25 (83)
3.19 (81)
3.75 (95)
4.38 (111)
3.25 (83)
3.75 (95)
3.63 (92)
3.88 (98)
3.75 (95)
4.38 (111)
3.75 (95)
4.13 (105)
4.75 (121)
4.25 (108)
4.75 (121)
4.63 (117)
5.25 (133)
6.13 (156)
5.75 (146)
5.75 (146)
5.75 (146)
4.13 (105)
5.50 (140)
4.50 (114)
4.50 (114)
3.56 (90)
4.44 (113)
5.25 (133)
4.44 (113)
5.25 (133)
4.56 (116)
4.04 (103)
4.63 (117)
5.25 (133)
7.50 (190)
6.50 (165)
8.25 (210)
E
2.50 (64)
2.50 (64)
2.50 (64)
2.50 (64)
2.81 (71)
2.50 (64)
2.81 (71)
2.81 (71)
2.81 (71)
2.81 (71)
2.81 (71)
2.81 (71)
3.13 (79)
3.13 (79)
3.13 (79)
3.13 (79)
3.13 (79)
3.13 (79)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
4.38 (111)
3.75 (95)
3.75 (95)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
6.06 (154)
4.38 (111)
5.19 (132)
5.19 (132)
6.06 (154)
6.06 (154)
6.06 (154)
6.06 (154)
6.06 (154)
6.50 (165)
6.50 (165)
6.50 (165)
6.50 (165)
7.20 (183)
6.50 (165)
6.50 (165)
Mounting
Slots
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
5/16 (8) X 11/16 (17)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
13/64 (5) X 3/8 (10)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 9/16 (14)
9/32 (7) X 13/32 (10)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
Ship Wt
Lbs (Kg)
2.6 (1)
2.8 (1)
3.5 (2)
3.4 (2)
4.0 (2)
3.5 (2)
4.3 (2)
4.5 (2)
4.8 (2)
4.2 (2)
4.9 (2)
6.0 (3)
5.9 (3)
6.6 (3)
6.7 (3)
7.4 (3)
7.7 (4)
7.9 (4)
8.8 (4)
8.5 (4)
9.4 (4)
9.0 (4)
10.6 (5)
10.0 (5)
11.1 (5)
9.7 (4)
13.9 (6)
14.7 (7)
11.3 (5)
13.6 (6)
11.7 (5)
15.5 (7)
13.6 (6)
15.6 (7)
16.5 (8)
16.8 (8)
18.6 (8)
19.2 (9)
21.0 (9)
21.5 (10)
21.5 (10)
23.4 (11)
28.1 (13)
30.0 (14)
28.0 (13)
30.5 (14)
28.1 (13)
30.0 (14)
29.2 (13)
30.0 (14)
33.5 (15)
33.5 (15)
38.0 (17)
42.5 (19)
42.5 (19)
53.0 (24)
63.7 (29)
63.7 (29)
140.0 (64)
102.0 (46)
102.0 (46)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-113
NEMA & General
Purpose Control
350
A
3.00 (76)
3.13 (79)
3.00 (76)
3.25 (83)
4.00 (102)
3.50 (89)
3.38 (86)
3.13 (79)
3.50 (89)
3.38 (86)
3.69 (94)
3.88 (98)
3.63 (92)
4.63 (117)
4.00 (102)
4.19 (106)
4.25 (108)
4.38 (111)
4.44 (113)
4.00 (102)
4.25 (108)
4.25 (108)
4.50 (114)
4.38 (111)
4.75 (121)
4.75 (121)
5.25 (133)
5.86 (149)
4.75 (121)
5.25 (133)
5.13 (130)
5.13 (130)
5.25 (133)
8.25 (149)
5.00 (127)
5.38 (137)
5.63 (143)
5.50 (140)
6.00 (152)
5.88 (149)
6.86 (175)
7.00 (178)
7.00 (178)
7.38 (187)
7.00 (178)
5.63 (143)
7.86 (200)
7.13 (181)
7.50 (191)
6.75 (171)
7.50 (191)
8.25 (210)
7.00 (178)
8.25 (210)
7.56 (192)
7.50 (191)
8.00 (203)
8.63 (219)
10.0 (254)
10.50 (267)
13.50 (343)
CONTROL
PRODUCTS
250
Letters
A, B, C, D, E, F, I, M
G
H
J
L
A, B, C, D, E, F, I, M
G
H
J
A, B, C, D, E, F, I, M
G
H
J
L
A, B, C, D, E, F, I, M
G
H
J
L
A, B, C, D, E, F, I, M
G
H
J
A, B, C, D, E, F, I, M
G
H
J
L
A, B, C, D, E, F, I, M
G
H
J
A, B, C, D, E, F, I, M
G
H
J
L
A, B, C, D, E, F, I, M
G
H
J
L
A, B, E, F, I
G
H
L
A, E, I
G
H
A, I
G
H
A, I
G
H
A, I
G
H
A
G
H
16
200
Approx
Voltage
Industrial Control Power Transformers
Class MTG
Dimensions
Top View
Dimension “C” does not include the
added height required for secondary
fuse clips—0.50 in. (13 mm) maximum
for type “K” clips.
Side View
The Primary Fuse Kit, when installed, will
add a maximum of 0.69 in. (18 mm) to
the transformer “A” dimension and 1.94
in. (49 mm) to the “C” dimension.
Note: Dimensions for reference, not for construction.
Dimensions in inches (mm).
Class MTG
Approximate Dimensions Inches (mm)
VA
Rating
50
75
100
16
200
CONTROL
PRODUCTS
150
250
300
NEMA & General
Purpose Control
350
500
750
1000
1500
2000
3000
5000
16-114
Voltage
Letters
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C, P
E, I
J
A
B, C
J
A
A
A
A
A
3.38 (86)
3.25 (83)
3.38 (86)
3.25 (83)
3.50 (89)
3.25 (83)
3.50 (89)
3.63 (92)
3.63 (92)
3.63 (92)
3.63 (92)
4.38 (111)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.50 (114)
4.38 (111)
4.50 (114)
5.00 (127)
4.38 (111)
4.75 (121)
4.75 (121)
5.50 (140)
5.13 (130)
5.13 (130)
5.13 (130)
5.38 (137)
5.00 (127)
5.00 (127)
5.00 (127)
5.50 (140)
6.00 (152)
5.50 (140)
6.00 (152)
7.25 (184)
7.38 (187)
7.00 (178)
7.38 (187)
5.56 (141)
5.31 (135)
5.56 (141)
7.00 (178)
6.13 (156)
6.44 (164)
6.25 (159)
8.75 (222)
B
3.00 (76)
3.00 (76)
3.00 (76)
3.38 (86)
3.38 (86)
3.38 (86)
3.38 (86)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
5.25 (133)
6.38 (162)
6.38 (162)
6.38 (162)
6.38 (162)
6.75 (171)
6.75 (171)
9.00 (229)
9.00 (229)
C
3.00 (76)
3.00 (76)
3.00 (76)
3.25 (83)
3.25 (83)
3.25 (83)
3.25 (83)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.00 (102)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
4.50 (114)
7.19 (183)
5.31 (135)
7.19 (183)
7.19 (183)
7.50 (191)
7.50 (191)
9.38 (238)
9.38 (238)
D
2.50 (64)
2.25 (57)
2.50 (64)
2.25 (57)
2.50 (64)
2.25 (57)
2.50 (64)
2.50 (64)
2.50 (64)
2.50 (64)
2.50 (64)
3.19 (81)
2.50 (64)
2.50 (64)
2.50 (64)
2.81 (71)
3.19 (81)
2.81 (71)
3.19 (81)
3.50 (89)
3.19 (81)
3.19 (81)
3.19 (81)
4.06 (103)
3.75 (95)
3.75 (95)
3.75 (95)
4.25 (108)
3.75 (95)
3.75 (95)
3.75 (95)
4.25 (108)
4.75 (121)
4.25 (108)
4.75 (121)
6.00 (153)
5.75 (146)
5.38 (137)
5.75 (146)
4.38 (111)
4.06 (103)
4.31 (110)
5.75 (146)
4.94 (125)
5.25 (133)
4.56 (116)
6.50 (165)
E
2.50 (64)
2.50 (64)
2.50 (64)
2.81 (71)
2.81 (71)
2.81 (71)
2.81 (71)
3.13 (79)
3.13 (79)
3.13 (79)
3.13 (79)
3.13 (79)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
3.75 (95)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
4.38 (111)
5.31 (135)
5.31 (135)
5.31 (135)
5.31 (135)
6.13 (156)
6.13 (156)
6.50 (165)
6.50 (165)
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Mounting
Slots
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
13/64 (5) X 15/32 (12)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
5/16 (8) X 11/16 (17)
9/32 (7) X 9/16 (14)
9/32 (7) X 9/16 (14)
7/16 (11) X 3/4 (19)
7/16 (11) X 3/4 (19)
Approx
Ship Wt
Lbs (Kg)
3.5 (2)
3.4 (2)
3.5 (2)
4.2 (2)
4.8 (2)
4.2 (2)
4.8 (2)
5.9 (3)
5.9 (3)
5.9 (3)
5.9 (3)
7.9 (4)
8.5 (4)
8.5 (4)
8.5 (4)
8.5 (4)
10.6 (5)
10.0 (5)
10.6 (5)
10.6 (5)
11.3 (5)
11.3 (5)
11.3 (5)
15.2 (7)
13.2 (6)
13.2 (6)
13.2 (6)
16.8 (8)
14.9 (7)
14.9 (7)
14.9 (7)
19.2 (9)
21.0 (9)
19.2 (9)
21.0 (9)
27.0 (12)
30.0 (14)
28.1 (13)
30.0 (14)
30.0 (14)
26.3 (12)
26.3 (12)
40.0 (18)
40.0 (18)
45.1 (21)
65.2 (30)
104.8 (48)
Heavy Duty Motor Starters & Contactors
Enclosed, Class 14, 40
Figure 2
Figure 1
K3
K2
K1
K3
K2
K2
Figure 3
K3
K1
K2
K2
K1
Figure 5
Figure 4
K3
K2
K1
K3
K2
K3
K3
K2
K2
Dimensions
D
A
K2
K2
D
A
K3
K3
D
A
E
B
G
D
A
E
B
G
G
C
K2
K2
C
K3
E
B
G
K3
K1
K3
E
B
C
View is typical for bottom and top
K3
K1
K2
C
K3
K1
K2
NEMA 1 General Purpose Enclosure (Standard width for use with or without CPT)햲
w/o CPT
w/o CPT
(100VA)
(300VA)
(300VA)
(300VA)
Figure
1
2
3
4
5
5
B
C
D
E
G
K1
K2
K3
K4
K5
1031⁄32 (279)
1317⁄32 (344)
191⁄8 (486)
247⁄8 (632)
40 (1016)
48 (1219)
613⁄32 (163)
731⁄32 (202)
113⁄8 (289)
133⁄8 (340)
20 (508)
20 (508)
51⁄32 (128)
63⁄8 (162)
711⁄16 (195)
81⁄8 (206)
11 (279)
121⁄2 (317)
8 7⁄32 (209)
101⁄4 (260)
155⁄8 (397)
213⁄4 (552)
375⁄8 (956)
453⁄16 (1148)
45⁄8 (117)
6 (152)
81⁄4 (210)
9 (229)
151⁄4 (387)
10 (254)
1
1
1
3
⁄4–1
1–11⁄4
11⁄2–2
2–21⁄2
1
⁄2–3⁄4
1
⁄2–3⁄4
—
—
—
—
11⁄4–11⁄2
11⁄4–11⁄2
—
—
—
—
2–3
2–21⁄2
10 (5)
15 (7)
26 (12)
37 (17)
135 (36)
150 (44)
K3
K4
K5
Approx
Ship Wt
Lbs (Kg) Ref Dwg
—
—
—
—
—
—
26 (12)
26 (12)
37 (17)
⁄4
1
⁄4
1
⁄4
1
⁄4
1
⁄4
1
⁄4
⁄2
1
⁄2–3⁄4
1
⁄2–3⁄4
1
⁄2–3⁄4
2–3
2–21⁄2
⁄2–3⁄4
3
⁄4–1
1–11⁄4
11⁄4–11⁄2
11⁄4–11⁄2
11⁄4–11⁄2
D68870
D68870
D68870
D68870
D65608
D65608
NEMA 1 General Purpose Enclosure (Extra wide for use with CPT)햲
Size
Max
CPT
Size
00–13⁄4 (200VA)
2–21⁄2 (200VA)
3–31⁄2 (250VA)
Outline Dimensions
Figure A
3
3
4
191⁄8 (486)
191⁄8 (486)
241⁄8 (632)
Mounting Dimensions
Mounting
Screw
Conduit Size
B
C
D
E
G
K1
K2
113⁄8 (289)
113⁄8 (289)
133⁄8 (340)
711⁄16 (195)
711⁄16 (195)
81⁄8 (206)
155⁄8 (397)
155⁄8 (397)
213⁄4 (552)
81⁄4 (210)
81⁄4 (210)
9 (229)
1
1
1
1
1–11⁄4
11⁄2–2
1–11⁄4
11⁄2–2
1–11⁄4–11⁄2 2–21⁄2
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
⁄4
⁄4
1
⁄4
⁄2–3⁄4
⁄2–3⁄4
1
⁄2–3⁄4
D68870
D68870
D68870
햲 Clamshell
enclosure Size 00 - 4; Standard width and
Extra wide.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-115
NEMA & General
Purpose Control
A
Mounting Dimensions
CONTROL
PRODUCTS
00–13⁄4
2–21⁄2
3–31⁄2
4
5
6
Mounting
Screw
Conduit Size
Approx
Ship Wt
Lbs (Kg) Ref Dwg
Outline Dimensions
16
Size
Max
CPT
Size
Heavy Duty Motor Starters & Contactors
Enclosed, Class 14, 40
Dimensions
Figure 1
Figure 2
Figure 3
Figure 4
G
G
D
A
T R
T R
ESE
ESE
B
C MAX
K2
G
E
K1
Typical view
top and bottom
K3
NEMA 4X Fiberglass Enclosures (Standard width for use with or without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
0–21⁄2
3–4
1
1
14.620 (371) 11.880 (302)
23.780 (604) 23.780 (604)
6.890 (175)
6.890 (175)
1⁄4
15.000 (381) 9.750 (248)
24.125 (612.7) 21.250 (539.7) 1⁄4
—
—
—
—
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
—
—
11 (4.9)
28 (12.7)
24-139-861-001
24-139-861-003
NEMA 7/9/3/4 Hazardous Location Enclosure (Standard width for use with or without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4 w/o CPT
2–21⁄2 (0–13⁄4 w/ CPT)
3–31⁄2 w/o CPT
4
5
2
2
2
2
2
15.250 (387)
17.750 (451)
17.750 (451)
28.688 (729)
48.875 (1038)
10.000 (254)
10.375 (264)
10.375 (264)
11.750 (298)
14 7/8 (377)
8.500 (216)
10.625 (270)
10.625 (270)
18.375 (467)
29 (373)
10.688 (272)
14.688 (373)
14.688 (373)
17.750 (451)
22.875 (581)
9.125 (132)
13.250 (337)
13.250 (337)
15.750 (400)
213⁄5 (533)
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
⁄
3⁄4
3⁄4
3⁄4
33 (14.9)
60 (27.0)
60 (27.0)
140 (63.5)
352 (159)
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
34
⁄
⁄
60 (27.0)
140 (63.5)
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
—
—
—
—
—
—
12 (5)
18 (8)
49 (22)
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
⁄4
1⁄4
3⁄8
3
⁄8
3⁄8
—
—
—
—
—
—
—
—
—
—
—
—
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
⁄
1⁄4
—
—
—
—
—
—
17.5 (8)
36 (16)
67 (30)
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
⁄
1⁄4
5⁄16
3⁄8
3⁄8
—
—
—
—
—
—
⁄
⁄
3⁄8
1⁄2
5⁄8
38
38
⁄
⁄
1⁄2
1⁄2
1⁄2
12
12
11⁄2
2
2
3
3
34
34
24-139-865-002
24-139-865-003
24-139-865-003
24-139-865-004
24-139-865-006
CONTROL
PRODUCTS
16
NEMA 7/9/3/4 Hazardous Location Enclosure (Extra wide for use with CPT)
Size
햲
0–21⁄2
3–31⁄2
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
2
2
17.750 (451) 14.688 (373)
28.688 (729) 17.750 (451)
10.375 (264)
11.750 (298)
10.625 (270) 13.250 (337)
18.375 (467) 15.750 (400)
38
12
12
12
⁄
⁄
⁄
⁄
2
3
34
24-139-865-003
24-139-865-004
NEMA 12/3/3R Industrial Use Enclosure (Standard width for use without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–21⁄2
3–4
3
3
3
13.000 (330) 7.750 (197)
16.000 (406) 8.125 (206)
26.000 (660) 13.125 (333)
5.438 (138)
6.063 (154)
7.563 (192)
12.250 (311) 5.000 (127)
15.250 (387) 5.000 (127)
25.250 (641) 10.000 (254)
Mtg Screw Conduit Size
G
K1
K2
⁄
⁄
⁄4
14
14
1
—
—
—
D41547
D41547
D41552
NEMA & General
Purpose Control
NEMA 12/3/3R Industrial Use Enclosure (Extra wide for use with CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–2 1⁄2
3–3 1⁄2
4
5
6
3
3
3
3
4
4
13.000 (330)
16.000 (406)
26.000 (660)
29.063 (738)
40.000 (1016)
48.000 (1219)
5.375 (137)
6.125 (156)
7.563 (192)
9.250 (235)
11.000 (279)
12.500 (317)
12.250 (311)
15.250 (387)
25.250 (641)
27.563 (700)
41.000 (1041)
49.000 (1244)
12.625 (321)
13.250 (337)
13.125 (333)
23.188 (589)
20.000 (508)
20.000 (508)
10.000 (254)
11.000 (279)
10.000 (254)
20.000 (508)
10.000 (254)
10.000 (254)
14
1
—
—
—
—
—
—
30 (14)
33 (15)
49 (22)
64 (29)
D17150
D17150
D41552
D17150
D65608007
D65608009
NEMA 4/4X Stainless Steel Enclosure (Standard width for use without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–21⁄2
3–4
3
3
3
13.000 (330) 7.750 (197)
16.000 (406) 8.125 (206)
26.000 (660) 13.125 (333)
5.438 (138)
6.063 (154)
7.563 (192)
12.250 (311) 5.000 (127)
15.250 (387) 5.000 (127)
25.250 (641) 10.000 (254)
14
14
—
—
—
D41546
D41546
D41551
NEMA 4/4X Stainless Steel Enclosure (Extra wide for use with CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–21⁄2
3–31⁄2
4
5 (Painted)
6 (Painted)
3
3
3
3
4
4
13.000 (330)
16.000 (406)
26.000 (660)
29.000 (737)
40.000 (1016)
48.000 (1219)
5.375 (137)
6.000 (152)
7.563 (192)
9.250 (235)
11.000 (279)
12.500 (317)
12.250 (311)
15.250 (387)
25.250 (641)
27.500 (699)
41.000 (1041)
49.000 (1244)
12.625 (321)
13.250 (337)
13.125 (333)
23.188 (589)
20.000 (508)
20.000 (508)
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
16-116
10.000 (254)
11.000 (279)
10.000 (254)
20.000 (508)
10.000 (254)
10.000 (254)
14
14
—
—
—
—
—
—
for addition of CPT only on size 2 1⁄2. If pilot
devices are needed, use size 3-31⁄2 enclosure.
햲 Used
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
—
—
—
—
—
—
30 (14)
33 (15)
67 (30)
64 (29)
D41917
D42935
D41551
D43292
D65608007
D65608009
Combination Heavy Duty Starters
Enclosed, Class 17, 18
Dimensions
Figure 1
Figure 2
H
7.0
Typical view
top and bottom
3.0
3.0
H
Typical view
top and bottom
1/2
1 X 1 1/4
X 3/4
Knockout Knockout
6.00
(156)
B
1/2 X 3/4
1 1/2 X 2 Knockout 1 1/2 X 2
Knockout
Knockout
C
B
E
C
D
GA
GA
Mounting
Holes for
1/4" Screws
Qty. 3
E
Mounting
Holes for
1/4" Screws
Qty. 4
D
E
D
Figure 4
Figure 3
8.5
3.5 3.5
H
Typical view
top and bottom
1/2 X 3/4
1 1/2 X 2 Knockout 1 1/2 X 2
Knockout
Knockout
16
B
D
E
C
CONTROL
PRODUCTS
G
A
D
NEMA & General
Purpose Control
E
Mounting
Holes for
1/4" Screws
Qty. 4
NEMA 1 Standard Width 0–6
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
Ref Dwg
0–2
21⁄2, 3
31⁄2, 4
5
6
1
2
3
4
4
24 (610)
24 (610)
36 (914)
72.156 (1833)
79.125 (2010)
11 (279)
20 (508)
24 (610)
20 (508)
22 (559)
8 (203)
8 (203)
8 (203)
11.031 (280)
13 (330)
6.125 (156)
15.00 (381)
14.00 (356)
71 (1803)
78 (1981)
2.125 (54)
2.125 (54)
5.00 (127)
16 (406)
18 (457)
21.00 (533)
21.00 (533)
33.50 (851)
—
—
3.50 (90)
3.50 (90)
5.00 (127)
—
—
35 (16)
48 (22)
101 (46)
250 (113)
275 (125)
D68774001
D68774002
D68774003
D56032005
D56032006
Ref Dwg
D68774002
D68774003
Outline Dimensions
NEMA 1 Extra Wide 0–3
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–2
21⁄2, 3
2
3
24 (610)
36 (914)
20 (508)
24 (610)
8 (203)
8 (203)
15.00 (381)
14.00 (356)
2.125 (54)
5.00 (127)
21.00 (533)
33.50 (851)
3.50 (90)
5.00 (127)
48 (22)
101 (46)
Outline Dimensions
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-117
Combination Heavy Duty Starters
Enclosed, Class 17, 18
Dimensions
Figure 2
Figure 1
5.50
(140)
Figure 3
B
B
C
E
B
D
E
C
D
C
H
G
E
Mounting Holes for
1/4" Screws Qty. 4
Mounting Holes for
1/4" Screws Qty. 3
D
AGH
AGH
A
Mounting Holes for
1/4" Screws Qty. 4
Figure 5
Figure 4
C
D
CONTROL
PRODUCTS
16
A
Mounting Holes for
No. 10 Screws Qty. 4
E
B
Mounting Holes for
G
3/8" screw. Qty. 4
NEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Standard Width 0–6
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–2
21⁄2, 3
31⁄2, 4
5 (Painted)
6 (Painted)
1
2
3
4
4
24 (610)
24 (610)
36 (914)
72.156 (1833)
79.125 (2010)
11 (279)
20 (508)
24 (610)
20 (508)
22 (559)
8 (203)
8 (203)
8 (203)
11.031 (280)
13 (330)
6.00 (152)
15.00 (381)
12 (305)
71 (1830)
78 (1981)
2.50 (64)
2.50 (64)
6.00 (152)
16 (406)
18 (457)
25.75 (654)
25.75 (654)
37.75 (959)
—
—
26.75 (680)
26.75 (680)
38.75 (984)
—
—
35 (16)
48 (22)
101 (46)
250 (113)
275 (125)
Ref Dwg
NEMA & General
Purpose Control
Outline Dimensions
Ref Dwg
D56033
D56033
D56033
D56032005
D56032006
NEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Extra Wide 0–3
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–2
2
3
24 (610)
36 (914)
20 (508)
24 (610)
8 (203)
15.00 (381)
12.00 (305)
2.50 (64)
6.00 (152)
25.75 (654)
37.75 (959)
26.75 (654)
38.75 (984)
49 (22)
102 (46)
D56033
D56033
Ref Dwg
Outline Dimensions
21⁄2, 3
8 (203)
NEMA 4X Fiberglass Standard Width 0–4
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–13⁄4
2–31⁄2
4
5
5
5
23.75 (603)
23.75 (603)
39.37 (1000)
14.62 (371)
23.75 (603)
29.52 (750)
7.12 (181)
8.50 (216)
12.20 (310)
24.09 (612)
24.06 (611)
40.94 (1040)
12.20 (310)
21.30 (541)
27.95 (710)
—
—
—
—
—
—
42 (19)
44 (20)
55 (25)
Outline Dimensions
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
16-118
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Combination Heavy Duty Starters
Enclosed, Class 18
Dimensions
Figure 1
RESET
OFF
TRIP
ON
A
D
T R
T R
ESE
ESE
B
G (Qty. 4)
C MAX
K2
K1
K3
E
Typical view bottom and top
16
Outline Dimensions
Mounting
Dimensions
Mounting
Screw
Conduit Size
Size
Figure
A
B
C
D
E
G
K1
K2
K3
0–13⁄4
2–31⁄2
4
5
1
1
1
1
17.38 (441)
28.25 (718)
32.25 (819)
40.875 (1038)
14.69 (373)
17.75 (451)
20.00 (508)
22.875 (581)
10.38 (264)
11.19 (284)
11.50 (292)
14.875 (378)
10.63 (270)
18.38 (467)
22.50 (572)
29 (737)
13.25 (337)
15.75 (400)
17.75 (451)
21.75 (552)
3
3
2
21⁄2
21⁄2
3
1
⁄8
3
⁄8
5
⁄8
5
⁄8
⁄4
3
⁄4
3
⁄4
1
⁄2
⁄2
1
⁄2
1
⁄2
3
⁄4
Approx Ship
Wt Lbs (Kg)
Ref Dwg
60 (27)
160 (72)
250 (113)
360 (163)
24-139-865-003
24-139-865-004
24-139-865-005
—
NEMA & General
Purpose Control
Note: Dimensions in inches (mm). Dimensions for
reference, not for construction. Contact Sales
Office for dimensions not listed.
CONTROL
PRODUCTS
NEMA 7 & 9, 3, 4 Standard Width 0–4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-119
Reversing Heavy Duty Starters & Contactors
Enclosed, Class 22, 43
K1
K2
K3
Figure 4
Figure 3
Figure 2
Figure 1
K2
Dimensions
K3
K1
G
D
A
D
D
A
T R
ESE
T R
A
ESE
B
G
G
E
B
E
B
C MAX
K2
C
C
E
K1
K3
K1
K3
K2
K1
K3
K2
CONTROL
PRODUCTS
16
View is typical for bottom and top
NEMA 1 General Purpose Enclosure (Standard width for use with and without CPT)
Mounting
Mounting Dimensions Screw
Conduit Size
Outline Dimensions
Size
Figure A
00–21⁄2 (200 VA)
3–4 (300 VA)
5
6
1
2
191⁄8 (486)
247⁄8 (632)
B
C
D
E
G
113⁄8 (289)
133⁄8 (340)
711⁄16 (195)
81⁄8 (206)
155⁄8 (397)
213⁄4 (552)
81⁄4 (210)
9 (229)
1
K1
1
⁄4
⁄2–3⁄4
1
1
⁄4
⁄2–3⁄4
Contact Sales Office
Contact Sales Office
K2
K3
K4
Approx
Ship Wt
Lbs (Kg)
1–11⁄4
11⁄4–11⁄2
11⁄2–2
2–21⁄2
—
—
30 (14)
52 (24)
Ref Dwg
D68870
D68870
NEMA & General
Purpose Control
NEMA 4/4X Stainless Steel Enclosure (with or without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
0–13⁄4
2–21⁄2
3–31⁄2 (w/o CPT)
3–31⁄2 (w/ CPT)
4
5 (Painted)
6 (Painted)
3
3
3
13 (330)
16 (406)
251⁄16 (637)
125⁄8 (321)
131⁄4 (337)
173⁄16 (437)
53⁄8 (137)
6 (152)
73⁄8 (187)
121⁄4 (311)
151⁄4 (387)
245⁄16 (618)
10 (254)
11 (279)
14 (356)
14
⁄
⁄
1⁄4
—
—
—
—
—
—
—
—
—
30 (14)
33 (15)
53 (24)
D41917
D42935
D17423
3
29 (737)
233⁄16 (589)
91⁄4 (235)
271⁄2 (699)
20 (508)
⁄
—
—
—
64 (29)
D43292
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
⁄
140
150
14
5 16
Contact Sales Office
Contact Sales Office
NEMA 7/9/3/4 Hazardous Location Enclosure (with or without CPT)
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
0–21⁄2
3–4
4
4
281⁄4 (718)
321⁄4 (819)
91⁄4 (235)
99⁄16 (243)
183⁄8 (467)
221⁄2 (572)
12
12
12
12
161⁄4 (413)
181⁄4 (464)
153⁄4 (400)
173⁄4 (451)
⁄
⁄
⁄
⁄
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
16-120
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3
3
34
34
24-139-865-004
24-139-865-005
Reversing Heavy Duty Starters & Contactors
Enclosed, Class 22, 43
Dimensions
Figure 5
Figure 6
Figure 7
.188 5.00
12.50
10.00
1.20
48.00
45.75
2.38
.69
15.25
20.00
4-POINT MOUNTING
FOR .31 SCREWS
A
29.88
DOOR
OPEN
90°
.38 HOLE DIA.
FOR PADLOCK
A
B C B
11.62
16.50
12.75
K3
7.25
K2
10.00
0
K1
0.50
2.71
A COMB. K.O.’s FOR 1.00, 1.25, 1.50, 2.00, OR 2.50 CONDUIT
B COMB. K.O.’s FOR 1.00, 1.25, OR 1.50 CONDUIT
C COMB. K.O.’s FOR 0.50 OR 0.75 CONDUIT
View is typical for bottom and top
16
NEMA 12/3/3R Industrial Use Enclosure (with or without CPT)
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–21⁄2
3–31⁄2 (w/o CPT)
3–31⁄2 (w/ CPT)
4
5
6 (300 VA CPT max.)
5
5
5
13 (330)
16 (406)
251⁄16 (637)
125⁄8 (321)
131⁄4 (337)
173⁄16 (437)
53⁄8 (137)
61⁄8 (156)
73⁄8 (187)
121⁄4 (311)
151⁄4 (387)
245⁄16 (618)
10 (254)
11 (279)
14 (356)
14
5
291⁄16 (738)
233⁄16 (589)
91⁄4 (235)
279⁄16 (700)
20 (508)
453⁄4 (1162)
Contact Sales Office
1⁄4
10 (254)
7
48 (1219)
20 (508)
121⁄2 (318)
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
14
⁄
⁄
⁄
—
—
—
—
—
—
—
—
—
30 (14)
33 (15)
53 (24)
D17150
D17150
D17150
5 16
⁄
—
—
—
64 (29)
D17150
—
—
—
Mtg Screw Conduit Size
G
K1
K2
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
—
—
35
38
14
CONTROL
PRODUCTS
Size
NEMA 4X Fiberglass Enclosure (with or without CPT)
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–21⁄2
3–31⁄2
4
6
6
23.78 (604)
23.78 (604)
6.89 (175)
6.89 (175)
224⁄5 (579)
224⁄5 (579)
14.68 (373)
23.78 (604)
1⁄4
134⁄5 (351)
1⁄4
224⁄5 (579)
Contact Sales Office
—
—
—
—
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-121
NEMA & General
Purpose Control
Size
Combination Reversing Heavy Duty Starters
Enclosed, Class 25, 26
Dimensions
Figure 1
7.0
3.0
Figure 2
3.0
8.5
H
H
Typical view
top and bottom
1/2 X 3/4
Knockout
1 1/2 X 2
Knockout
1 1/2 X 2
Knockout
1 1/2 X 2
Knockout
B
E
C
D
Figure 3
3.5 3.5
Typical view
top and bottom
1/2 X 3/4
1
Knockout 1 /2 X 2
Knockout
B
D
E
C
G
A
GA
Mounting
Holes for
1/4" Screws
Qty. 4
E
E
D
Mounting
Holes for
1/4" Screws
Qty. 4
D
Figure 4
Figure 5
Figure 6
B
E
C
D
RESET
OFF
TRIP
ON
A
D
T R
T R
ESE
ESE
AGH
B
Mounting Holes
for 3/8" screws Qty. 4
CONTROL
PRODUCTS
16
C MAX
Mounting Holes for
1/4" Screws Qty. 4
K1
E
K3
NEMA 1 Standard Width 0–6
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–21⁄2
3–4
5 (Painted)
6 (Painted)
1
2
3
3
24 (610)
36 (914)
72.156 (1833)
79.125 (2010)
20 (508)
24 (610)
20 (508)
22 (559)
8 (203)
8 (203)
11.031 (280)
13 (330)
15.00 (381)
14.00 (356)
71 (1803)
78 (1981)
2.125 (54)
5.00 (127)
16 (406)
18 (457)
21.00 (533)
33.50 (851)
—
—
3.50 (90)
5.00 (127)
—
—
60 (27)
121 (55)
250 (113)
275 (125)
D68774002
D68774003
D56032005
D56032006
Ref Dwg
D68774005
D68774006
D56032005
D56032006
Outline Dimensions
NEMA & General
Purpose Control
Typical view
top and bottom
K2
Ref Dwg
NEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Standard Width 0–6
Mounting
Dimensions
Size
Figure
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
0–21⁄2
3–4
5 (Painted)
6 (Painted)
5
5
3
3
24 (610)
36 (914)
72.156 (1833)
79.125 (2010)
20 (508)
24 (610)
20 (508)
22 (559)
8 (203)
8 (203)
11.031 (280)
13 (330)
15.00 (381)
12 (305)
71 (1803)
78 (1981)
3.50 (90)
6.00 (152)
16 (406)
18 (457)
25.75 (654)
37.75 (959)
—
—
26.75 (654)
38.75 (984)
—
—
63 (29)
124 (56)
250 (113)
275 (125)
Outline Dimensions
NEMA 4X Fiberglass 0–4
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
0–21⁄2
3–4
4
4
23.780 (604) 14.680 (373)
23.780 (604) 23.780 (604)
6.890 (175)
6.890 (175)
24.125 (612.7) 12.250 (311) 3⁄8
24.125 (612.7) 21.250 (539.7) 3⁄8
—
—
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
—
—
—
—
18 (8)
28 (12.7)
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
⁄
140 (63.5)
24-139-861-001
24-139-861-003
NEMA 7/9/3/4 Hazardous Location 0–4
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
Mtg Screw Conduit Size
G
K1
K2
0–21⁄2
3–4
6
28.688 (729) 17.750 (451)
11.750 (298)
18.375 (467) 15.750. (400)
3⁄8
1⁄2
Contact Sales Office
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
16-122
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
3
34
24-139-865-004
Two Speed Heavy Duty Starters
Enclosed, Class 30
Dimensions
Figure 1
K2
K1
Figure 1a
K2
K3
Figure 2
K3
K1
K1
K2
Figure 3
Figure 4
K3
D
A
D
A
D
A
E
B
G
D
A
G
G
E
B
C
K1
E
B
K2
C
K3
G
E
B
C
K3
K1
K2
C
K3
K1
K2
2 Speed 1 Winding
NEMA 1 General Purpose Enclosure (Standard width for use with or without CPT)
Size
Fig
Outline Dimensions
A
B
0–1 3⁄4 w/o CPT
0–1 3⁄4 (200 VA)
2–2 1⁄2
3–3 1⁄2
1
1a
2
2
19 1⁄8
24 7⁄8
16
18.31
(486)
(632)
(406)
(465)
11 3⁄8
13 3⁄8
17.13
21.19
Mounting Dimensions
D
E
C
(289)
(340)
(435)
(538)
7 11⁄16
8 1⁄8
7.63
7.38
(195)
(206)
(194)
(187)
15 5⁄8
21 3⁄4
15.25
17.56
(397)
(552)
(387)
(446)
Mtg
Screw
G
Conduit Size
K1
K2
K3
Approx
Ship Wt
Lbs (Kg)
Ref Dwg
8 1⁄4 (210)
9
(229)
14
(355)
18
(457)
14
⁄
1⁄4
1⁄4
1⁄4
12 34
⁄–⁄
1⁄2–3⁄4
1⁄2–3⁄4
1 1⁄4 –1 1⁄2
1–1 1⁄4
1 1⁄4 –1 1⁄2
1 1⁄4 –1 1⁄2
1⁄2 –3⁄4
1 1⁄2–2
2–2 1⁄2
1 1⁄4 –1 1⁄2
1 1⁄2–2
26
52
39
60
(12)
(24)
(20)
(27)
D68870
D68870
D42932001
D72956002
10
14
14
14
20
20
(254)
(355)
(355)
(355)
(508)
(508)
14
⁄
⁄
1⁄4
1⁄4
5⁄16
5⁄16
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34
47
47
55
61
61
(15)
(21)
(21)
(25)
(28)
(28)
D41917000
10
14
14
14
20
(254)
(355)
(355)
(355)
(508)
14
NEMA 4/4X Stainless Steel Enclosure (Standard width for use with or without CPT)
w/o CPT
w/ CPT
w/o CPT
w/ CPT
13
16
16
25 1⁄16
29
29
(330)
(406)
(406)
(637)
(737)
(737)
12 5⁄8
17 1⁄8
17 1⁄8
17 3⁄16
23 3⁄16
23 3⁄16
(321)
(435)
(435)
(437)
(589)
(589)
5 3⁄8
7 5⁄8
7 5⁄8
7 3⁄8
9 1⁄4
9 1⁄4
(137)
(194)
(194)
(187)
(235)
(235)
12 1⁄4
15 1⁄4
15 1⁄4
24 5⁄16
27 1⁄2
27 1⁄2
(311)
(387)
(387)
(618)
(699)
(699)
14
D43292001
D43292001
NEMA 12/3/3R Industrial Use Enclosure (Standard width for use with or without CPT)
0–1 3⁄4
0–1 3⁄4
2–2 1⁄2
2–2 1⁄2
3–4
w/o CPT
w/ CPT
w/o CPT
w/ CPT
3
3
3
3
3
13
16
16
25 1⁄16
29
(330)
(406)
(406)
(637)
(737)
12 5⁄8
17 1⁄8
17 1⁄8
17 3⁄16
23 3⁄16
(321)
(435)
(435)
(437)
(589)
5 3⁄8
7 5⁄8
7 5⁄8
7 3⁄8
9 1⁄4
(137)
(194)
(194)
(187)
(235)
12 1⁄4
15 1⁄4
15 1⁄4
24 5⁄16
27 1⁄2
(311)
(387)
(387)
(618)
(699)
⁄
⁄
1⁄4
1⁄4
5⁄16
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34
47
47
55
61
(15)
(21)
(21)
(25)
(28)
⁄
—
—
—
—
—
—
28
(13)
14
D17150010
D17150010
CONTROL
PRODUCTS
3
3
3
3
3
3
16
0–1 3⁄4
0–1 3⁄4
2–2 1⁄2
2–2 1⁄2
3–3 1⁄2
4
D19673000
NEMA 4X Fiberglass Enclosure (Standard width for use with or without CPT)
0–2 1⁄2
3–4
4
4
23.780 (604)
39.37 (1000)
23.780 (604)
29.53 (750)
6.890 (175)
12.60 (320)
—
—
—
—
14
—
24139861003
24139861004
NEMA 1 General Purpose Enclosure (Standard width for use with or without CPT)
Size
Fig
Outline Dimensions
A
B
0–2 1⁄2 w/o CPT
0–2 1⁄2 (200 VA)
3–4 w/o CPT
1
1a
1a
19 1⁄8
24 7⁄8
24 7⁄8
(486)
(632)
(632)
11 3⁄8
13 3⁄8
13 3⁄8
(289)
(340)
(340)
C
Mounting Dimensions
D
E
7 11⁄16 (195)
8 1⁄8 (206)
8 1⁄8 (206)
15 5⁄8
21 3⁄4
21 3⁄4
(397)
(552)
(552)
8 1⁄4 (210)
9
(229)
9
(229)
Mtg
Screw
G
Conduit Size
K1
K2
K3
Approx
Ship Wt
Lbs (Kg)
Ref Dwg
14
⁄
1⁄4
1⁄4
12 34
⁄–⁄
1⁄2–3⁄4
1⁄2–3⁄4
1–1 1⁄4
1 1⁄4–1 1⁄2
1 1⁄4 –1 1⁄2
1 1⁄2–2
2–2 1⁄2
2–2 1⁄2
30
52
52
(14)
(24)
(24)
D68870
D68870
D68870
⁄
⁄
⁄4
1⁄4
1⁄4
5⁄16
5⁄16
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34
41
41
41
55
61
61
(15)
(19)
(19)
(19)
(25)
(28)
(28)
D43292001
D43292001
NEMA 4/4X Stainless Steel Enclosure (Standard width for use with or without CPT)
0–1 3⁄4 w/o CPT
0–1 3⁄4 w/ CPT
2–2 1⁄2 w/o CPT
2–2 1⁄2 w/ CPT
3–3 1⁄2 w/o CPT
3–3 1⁄2 w/ CPT
4
3
3
3
3
3
3
3
13
16
16
16
25 1⁄16
29
29
(330)
(406)
(406)
(406)
(637)
(737)
(737)
12 5⁄8
17 1⁄8
13 1⁄4
17 1⁄8
17 3⁄16
23 3⁄16
23 3⁄16
(321)
(435)
(337)
(435)
(187)
(589)
(589)
5 3⁄8
7 5⁄8
6
7 5⁄8
7 3⁄8
9 1⁄4
9 1⁄4
(137)
(194)
(152)
(194)
(187)
(235)
(235)
12 1⁄4
15 1⁄4
15 1⁄4
15 1⁄4
24 5⁄16
27 1⁄2
27 1⁄2
(311)
(387)
(387)
(387)
(618)
(699)
(699)
10
14
11
14
14
20
20
(254)
(355)
(279)
(355)
(355)
(508)
(508)
14
10
14
11
14
14
20
(254)
(355)
(279)
(355)
(355)
(508)
14
14
1
NEMA 12/3/3R Industrial Use Enclosure (Standard width for use with or without CPT)
0–1 3⁄4 w/o CPT
0–1 3⁄4 w/CPT
2–2 1⁄2 w/o CPT
2–2 1⁄2 w/CPT
3–3 1⁄2 w/o CPT
3–4 w/CPT
3
3
3
3
3
3
13
16
16
16
25 1⁄16
29 1⁄16
(330)
(406)
(406)
(406)
(637)
(738)
12 5⁄8
17 1⁄8
13 1⁄4
17 1⁄8
17 3⁄16
23 3⁄16
(321)
(435)
(337)
(435)
(187)
(589)
5 3⁄8
7 5⁄8
6 1⁄8
7 5⁄8
7 3⁄8
9 1⁄4
(137)
(194)
(156)
(194)
(187)
(235)
12 1⁄4
15 1⁄4
15 1⁄4
15 1⁄4
24 5⁄16
27 9⁄16
(311)
(387)
(387)
(387)
(618)
(700)
⁄
⁄
1⁄4
1⁄4
1⁄4
5⁄16
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34
41
41
41
55
61
(15)
(19)
(19)
(19)
(25)
(28)
⁄
—
—
—
—
—
—
28
(13)
14
D17150010
D17150010
D19673000
NEMA 4X Fiberglass Enclosure (Standard width for use with or without CPT)
0–2 1⁄2
3–4
4
4
23.780 (604)
39.37 (1000)
23.780 (604)
29.53 (750)
6.890 (175)
12.60 (320)
—
—
—
—
14
—
24139861003
24139861004
Note: Dimensions in inches (mm). Dimensions for reference, not for construction. Contact sales office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-123
NEMA & General
Purpose Control
2 Speed 2 Winding
Combination Two Speed Heavy Duty Starters
Enclosed, Class 32
Dimensions
Figure 2
Figure 1
7.0
3.0
3.0
8.5
3.5 3.5
H
H
Typical view
top and bottom
1/2 X 3/4
Knockout
1 1/2 X 2
Knockout
Typical view
top and bottom
1/2 X 3/4
1 1/2 X 2 Knockout 1 1/2 X 2
Knockout
Knockout
1 1/2 X 2
Knockout
B
E
C
D
B
D
E
C
G
GA
A
Mounting
Holes for
1/4" Screws
Qty. 4
E
E
D
Mounting
Holes for
1/4" Screws
Qty. 4
D
Figure 4
B
Figure 3
C
D
CONTROL
PRODUCTS
16
E
AGH
NEMA & General
Purpose Control
Mounting Holes for
1/4" Screws Qty. 4
NEMA 1 Standard Width 0–4
Mounting
Dimensions
A
B
C
D
E
G
H
Approx
Ship Wt
Lbs (Kg)
24 (610)
36 (914)
24 (610)
36 (914)
20 (508)
24 (610)
20 (508)
24 (610)
8 (203)
8 (203)
8 (203)
8 (203)
15.00 (381)
14.00 (356)
15.00 (381)
14.00 (356)
2.125 (54)
5.00 (127)
2.125 (54)
5.00 (127)
21.00 (533)
33.50 (851)
21.00 (533)
33.50 (851)
3.50 (90)
3.50 (90)
3.50 (90)
3.50 (90)
68 (31)
71 (32)
135 (61)
138 (63)
D68774
D68774
D68774
D68774
2.50 (64)
6.00 (152)
2.50 (64)
6.00 (152)
25.75 (654)
37.75 (959)
25.75 (654)
37.75 (959)
26.75 (680)
38.75 (984)
26.75 (680)
38.75 (984)
68 (31)
71 (32)
135 (61)
138 (63)
D68774
D68774
D68774
D68774
Outline Dimensions
Size
0–13⁄4
2–4
0–21⁄2,
3–4
Figure
(1 Winding)
(1 Winding)
(2 Winding)
(2 Winding)
1
2
1
2
Ref Dwg
NEMA 12/3/3R/4 (Painted), 4/4X Stainless Standard Width 0–4
0–13⁄4
2–4
0–21⁄2,
3–4
(1 Winding)
(1 Winding)
(2 Winding)
(2 Winding)
4
4
4
4
24 (610)
36 (914)
24 (610)
36 (914)
20 (508)
24 (610)
20 (508)
24 (610)
8 (203)
8 (203)
8 (203)
8 (203)
15.00 (381)
12 (305)
15.00 (381)
12 (305)
Nema 4X Fiberglass 0–4
Size
Figure
Outline Dimensions
A
B
C
Mounting Dimensions
D
E
0–13⁄4
2–4
3
3
23.780 (604) 14.680 (373)
23.780 (604) 23.780 (604)
6.890 (175)
6.890 (175)
24.125 (613) 12.250 (311)
24.125 (613) 21.250 (540)
Mtg Screw Conduit Size
G
K1
K2
1
⁄4
⁄4
1
—
—
Note: Dimensions in inches (mm).
Dimensions for reference, not for construction.
Contact sales office for dimensions not listed.
16-124
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
—
—
K3
Approx Ship Wt
Lbs (Kg)
Ref Dwg
—
—
18 (8)
28 (13)
Reduced Voltage Starters
Class 36, 37
Dimensions
Figure 1
Figure 2
C
H
B
K
L
Handle
(Optional)
C
A
D
A
Mounting Hole
for 1/4" screw
E
B
J
(4) .687 Dia Holes
Restricted Area
for
Auto Transformer
D
G
E
16
CONTROL
PRODUCTS
Class 36, 37, NEMA 1, 4, 4X, 12/3R, Combination and Non-combination
Reduced Voltage
AutoTransformer
Size
1 3/4 –2 1/2
3–3 1/2
4
5, 6
Part Winding & Wye Delta
Circuit
Disconnect Breaker
0–2
0–2 1/2
2 1/2 –3 1/2
3–3 1/2
4
4
5, 6
5, 6
Figure
1
1
1
2
A
43 5/16
55 5/16
74 21/32
90
B
24 5/32
28 9/32
28 9/32
29 30/31
C
11
11
11
20
D
42 11/32
54 11/32
73 13/32
16
E
20
24
24
24 7/16
G
2 1/16
2 1/8
2 1/8
2 16/21
H
—
—
—
1 23/40
I
—
—
—
2
J
—
—
—
1 1/8
K
—
—
—
8 3/40
L
—
—
—
3
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-125
Duplex Heavy Duty Controllers
Class 83, 84
Dimensions
Figure 1
Figure 2
Figure 3
A
Class 83 Non-Combination Type
Enclosure
Type
NEMA 1
CONTROL
PRODUCTS
16
NEMA 12
NEMA 4/4X
Size
0–13⁄4
2, 21⁄2
3–4
0–13⁄4
2, 21⁄2
3–4
0–13⁄4
2, 21⁄2
3–4
Outline Dimensions
Figure A
B
1
19 1⁄2
16 1⁄8
1
25 1⁄16
17 3⁄16
1
29 11⁄16
23 3⁄16
2
19 1⁄2
16 1⁄8
2
25 1⁄16
17 3⁄16
2
231⁄2
23 3⁄16
2
19 1⁄2
16 1⁄8
2
25 1⁄16
17 3⁄16
2
29 1⁄16
23 3⁄16
C
6 1⁄2
7 3⁄8
9 1⁄4
6 1⁄2
7 3⁄8
11 1⁄4
6 1⁄2
7 3⁄8
9 1⁄4
Mounting
Dimensions
D
18 3⁄4
24 5⁄16
27 9⁄16
18 3⁄4
24 5⁄16
27 9⁄16
18 3⁄4
24 5⁄16
27 9⁄16
C
79⁄16
911⁄16
79⁄16
Mounting
Dimensions
D
33
5413⁄16
33
E
13
14
20
13
14
20
13
14
20
Mounting
Screw
G
1⁄4
1⁄4
5⁄16
1⁄4
1⁄4
5⁄16
1⁄4
1⁄4
5⁄16
Conduit Size
K1
K2
1⁄2–3⁄4
11⁄4–11⁄2
1⁄2–3⁄4
11⁄4–11⁄2
2–21⁄2
11⁄4–11⁄2
—
—
—
—
—
—
—
—
—
—
—
—
E
20
241⁄4
20
Mounting
Screw
G
3
⁄8
3⁄8
3⁄8
Conduit Size
K1
K2
7⁄8–11⁄8
7⁄8–11⁄8
—
—
—
—
K3
1⁄2
1⁄2–3⁄4
1⁄2–3⁄4
—
—
—
—
—
—
K4
1⁄2–3⁄4
11⁄4–11⁄2
11⁄4–11⁄2
—
—
—
—
—
—
K5
11⁄4–11⁄2
11⁄2–2
2–21⁄2–3
—
—
—
—
—
—
Approx
Ship Wt
Lbs
20
57
93
20
57
93
20
57
93
K5
123⁄64–123⁄32
—
—
Approx
Ship Wt
Lbs
70
106
—
Class 84 Combination Type
Enclosure
Type
NEMA 1
NEMA & General
Purpose Control
NEMA 4/4X/12
Size
0–21⁄2
3–4
0–4
Outline Dimensions
Figure A
B
3
341⁄8
245⁄8
3
56
281⁄2
3
341⁄8
245⁄8
Dimensions
may vary for size 3 & 4
stainless steel enclosures.
16-126
NEMA
4 Painted, 4X Stainless Steel.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
K3
11⁄8–123⁄64
—
—
K4
11⁄8–123⁄64
—
—
Pump Control Panels
Class 87, 88
Dimensions
Outline Drawings
Figure 1
Figure 2
F
F
Opening for
Conduit Hub
Size "P"
Figure 3
C
B
E
5.000
C
D
A
A
G
D
B
F
Mounting Hole
for 1/4" screw
C
F
E
B
6.000
Mounting Hole
For 3/8" screw
DG
A
Figure 4
C
H
B
K
L
Handle
(Optional)
L
L
M
Mounting Holes
For 5/16" Hardware
N
16
A
CONTROL
PRODUCTS
H
I
J
K
J
(4) .687 Dia Holes
NEMA & General
Purpose Control
D
F
G
E
Class 87 Standard Pump Panel
Size
21/2
1–
3–4
5
6
4 (Vac)
Figure
A
1
1
2
2
2
281/2
401/2
725/32
791/8
5531/32
B
C
20
24
20
22
243/8
81/16
83/32
D
10
1215/16
922/32
E
24
36
71
78
5426/32
F
—
—
16
18
201/4
10
12
21/8
21/8
21/8
Conduit Knockout
L
M
Hub
P
G
H
I
J
K
27
39
7029/32
777/8
5423/32
51/2
87/16
81/2
1115/16
111/2
157/16
141/2
—
—
—
—
—
—
—
—
—
—
263/16
—
5
2714/32 —
—
—
—
D
42 11/32
54 11/32
73 13/32
16
E
20
24
24
24 716
—
—
—
1/ x 3/
11/4 x 1
2
4
131/32 x 215/32 7/8 x 11/8
—
—
N
3/
4
x1
—
—
11/2
21/2
—
Class 88 Reduced Voltage Pump Panels
RVAT
Size
2–2 1/2
3–3 1/2
4
5, 6
Part Winding & Wye Delta
Fusible
Circuit
Disconnect Breaker
1–2
1–2 1/2
2 1/2–3 1/2
3–3 1/2
4
4
5, 6
5, 6
Figure
3
3
3
4
A
43 5/16
55 5/16
74 21/32
90
B
24 5/32
28 9/32
28 9/32
30
C
11
11
11
20
F
2 1/16
2 1/8
2 1/8
2 3/4
H
—
—
—
1 1/2
I
—
—
—
—
J
—
—
—
1 1/8
K
—
—
—
8 1/16
L
—
—
—
3
Note: Dimensions in inches (millimeters). Dimensions
for reference, not for construction. Contact Sales
Office for dimensions not listed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-127
Lighting Contactors
LE, CLM, CM
Dimensions
Figure 2
Figure 1
Figure 3
Figure 4
Figure 5
G
K3
K2
K1
K2
K2
K2
K2
D
A
B
K2
K2
E
B
G
C
GA
C
K1
K2
K2
K3
E
K2
K3
D
Enclosed Class LE, CLM, CM
LE
Lighting
Non-Combination Rating
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
20A (2–12p),
30–60A (3p)
—
CLM
Lighting
Rating
Outline Dimensions
Fig
D
E
13
1
7
5
1
10 /32
6 /32
5 /32
8 /32
4 /8
1
1317/32
731/32
63/8
101/4
6
1
1
1
191/8
113/8
711/16
155/8
81/4
1
1
1
5
2
7
24 /8
26
48
3
13 /8
175/8
20
8 /8
121/2
121/2
21 /4
253/16
453/16
9
151/2
10
1
/4
1
/4
1
/4
1
/2– /4
1
/2–3/4
2–21/2
1
191/8
113/8
711/16
155/8
81/4
1
3
1
5
2
16
247/8
26
48
171/8
133/8
175/8
20
75/8
81/8
121/2
121/2
151/4
213/4
253/16
453/16
14
9
151/2
10
1
/4
/4
1
/4
1
/4
1
3
/4
/4
/4
/4
1
1
1
3
/2
K3
3
/2– /4
/2–3/4
/2–3/4
/4–1
K5
/4–1
—
—
1–11/4
—
—
11/2–2
—
—
1 /4–1 /2
11/4–11/2
11/4–11/2
21/2
11/4–11/2
1
/2–3/4
—
—
11/4–11/2
—
—
2–21/2
1
1–11/4
11/2–2
—
—
1
/2–3/4
/2–3/4
—
2–21/2
11/4–11/2
11/4 –11/2
11/4 –11/2
11/4 –11/2
11/4–11/2
2–21/2
11/4 –11/2
1
/2–3/4
—
—
—
11/4 –11/2
—
—
—
2–21/2
3
/2–3/4
1
1–1 1/4
K4
3
1
1
5
16
131/4
61/8
151/4
11
1
—
—
—
—
—
30–60A (6–12p) 3
16
171/8
75/8
151/4
14
1
—
—
—
—
—
5
26
131/8
79/16
251/4
10
1
5
/4
/4
—
—
—
—
—
200A
60–100A
300–400A
5
5
4
26
16
48
17 /8
13
20
12 /2
91/2
121/2
23 /16
151/8
49
15 /2
11
10
1
/4
1
/4
1
/4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20–30A
5
16
131/4
61/8
151/4
11
1
—
—
—
—
—
—
5
26
131/8
79/16
251/4
10
1
—
—
—
—
—
11
151/2
10
1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
60–100A
200A
300–400A
Fusible and Non-fusible
Disconnect
Circuit Breaker
16-128
K2
20A (2–12p)
30–60A (3p)
Type
NEMA
with &
12/3R & without
4/4X
CPT
K1
C
5
5
4
16
26
48
1
3
1
13
175/8
20
LE, CM
Combination
Conduit Size
G
B
30A (3p)
30–60A (6–12p),
100A
100A (3p)
—
200A
200–400A
—
NEMA 1
—
300–400A
20A (2–12p),
30–60A (3–9p), 20–100A
100A (3p)
with CPT
—
30–60A (6–12p)
30–60A (12p) 200A
200–400A
—
—
300–400A
20A (2–12p)
20–30A
30–60A (3p)
31
Mtg
Screw
1
without
CPT
—
30–60A (6–9p)
without 100A (3p)
CPT
200–400A
—
NEMA
—
12/3R &
20A (2–12p)
4/4X
30–60A (3p)
30–60A (6–9p)
with CPT 100A (3p)
—
200–400A
—
A
Mounting
Dimensions
1
9 /2
121/2
121/2
/4
1
15 /8
253/16
49
/4
/4
/4
/4
1
/4
1
Outline Dimensions
Lighting Ratings Fig
A
B
C
20–60A
100A
200A
300A
20–100A
24
24
46
76
24
11
20
20
22
11
8
8
10
13
8
3
3
3
3
3
D
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
E
G
K1
K2
K3
Manual Control
Class 11 - 3RV, SMF, MMS
Wiring Diagrams
Signaling Contact
for Class 11 - 3RV
Class 11 - 3RV
Typical Wiring Diagrams—Class SMF
3RV1921-1M
Typical Wiring Diagrams—MMS
L3
L1
T1
L1
T2
L2
T2
L2
REVERSING
SINGLE PHASE
3-LEAD
REPULSION-INDUCTION
MOTOR
T3
L3
T3
L3
Reversing Manual Motor
Starting Switch 2-Pole, 1-Phase
L1
L3
T3
Pilot Lights
(if used)
L1
T1
T2
L2
T2
L2
T3
L3
T3
L3
Motor
Reversing Manual Starter
3-Pole, 3-Phase
L1
Pilot Lights
(if used)
2-SPEED
2-WINDING
SINGLE PHASE
MOTOR
Motor
T1
2-Pole, 1-Phase with
Pilot Lights
2-SPEED
2-WINDING WYE CONNECTED
3- PHASE
MOTOR
3-Pole, 3-Phase
3-Pole Reversing Switches
THREE PHASE MOTOR
LINE AND
MOTOR LEADS
Line
Meter
L1 to
L2 to
L3 to
T1 to
T2 to
T3 to
L.H.
UNIT
_
_
_
T1
T2
T3
_
_
Pilot Light
Leads to
T1 T2 T3
R.H.
UNIT
L1
L2
L3
_
_
_
T1
T3
SINGLE PHASE CAPACITOR
OR SPLIT PHASE MOTOR
L.H.
UNIT
LINE AND
MOTOR LEADS
Line
L1 to
L2 to
_
_
Meter
T1 to
T4 to
T5 to
T8 to
T1
T3
L1
T2
Furnish Jumper
L1
L2
_
_
_
_
L3 to
_
_
Pilot Light
Leads to
T8 T4
Motor
R.H.
UNIT
T2
T1
T3
T1 T5
SINGLE PHASE 4-LEAD
REPULSION - INDUCTION MOTOR
L.H.
UNIT
LINE AND
MOTOR LEADS
Line
L1 to
L2 to
_
_
Meter
T1 to
T4 to
T5 to
T8 to
T2
L3
T3
T1
Furnish Jumper
L3 to
_
_
Pilot Light
Leads to
T8
T1
R.H.
UNIT
L1
L2
_
_
_
_
T2
L1
T2
T5 T4
RUN
START
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-129
NEMA & General
Purpose Control
T1
REV
FWD
COM
L3
LOW
HIGH
T11
T3
T1
L1
T3
L1 L2 L3
L2
LOW
T12
T13
T1
T2
T3
T1
L1
Pilot Light
(if used)
Motor
L1
HIGH
LOW
L3
T3
REV
(R.H. UNIT)
COM
T1
L1
FWD
(L.H. UNIT)
HIGH
T1
L2
REV
AC 2-Speed Manual Motor Starting Switches
CONTROL
PRODUCTS
L1
FWD
16
AC Reversing Manual Starter and
Manual Motor Starting Switches
Heavy Duty Motor Starters
Class 14
Wiring Diagrams
3-Phase and Single Phase Magnetic Starters
Ambient Compensated
Single Phase Sizes 00-2 1/2
Solid State Overload
Single Phase Sizes 0-1
Ambient Compensated
3-Phase Sizes 00-2 1/2
Ambient Compensated
3-Phase Sizes 3-4
Solid State Overload
3-Phase Sizes 5-8
Solid State Overload
3-Phase Sizes 00-4
INCOMING LINE
POWER WIRING:
USE 75°C COPPER WIRE ONLY.
SIZE
CT RATIO
5
300:5
6
600:5
7
750:5
A
B
C
CIRCUIT
PROTECTIVE
DEVICE
(IF USED)
X1
2CT
NOTE A
16
"A"
L1/1
3
8
L2
A1
1200:5
L3
"C "
A2
REMOVE WIRE " C " IF THE CONTACTOR
COIL IS TO OPERATE ON A VOLTAGE
OTHER THAN LINE VOLTAGE OR ON A
SEPARATE CONTROL SOURCE.
CONTROL
PRODUCTS
CONTACTOR
M
2
"B "
CURRENT
TRANSFORMER
(WHEN USED, SEE TABLE)
RELAY
1CT
2CT
X1
(IF USED)
3CT
X1
X1
95
O.L.
96
T1
T2
T3
NEMA & General
Purpose Control
NOTES:
A: 2CT IS LOCATED ON THE LINE SIDE
OF CONTACTOR ON SIZE 7 STARTERS ONLY.
Solid State Overload 3-Phase
Wired as 1-Phase햲햳햴
햲 Warning:
The ESP100 Starter and Single Phase Motor
must be wired with polarity as shown. Neutral and L1
wires must be wired as indicated on the drawing.
Polarity is indicated by the arrows.
16-130
햳 Full
Load Amps (FLA): Adjustment of the ESP100 solid
state overload relay (OL) must be made as follows to
accommodate the single phase motor: For an approximate setting of a single phase motor application,
multiply the motor nameplate FLA by .75 and set the
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
LOAD
dial on the overload relay (OL) to resulting value.
3-phase for frame size A (without windows) can not
be wired for single phase. Use the proper version for
single phase.
햴 The
Combination Heavy Duty Starters
Class 17, 18
Wiring Diagrams
3-Phase
THREE PHASE
TO SUPPLY
Size 0–4
L1
L2
L3
DISCONNECT or
CIRCUIT BREAKER
B
3
V
M
1
T2
4
CONTROL FUSES
(OPTIONAL)
T3
OVERLOAD RELAY
95
96
XF
C
D
M
SEC FUSE
H4
X1
H2
SEC
T2
T1
ALTERNATE
CONNECTIONS FOR
TRANSFORMER
W
2
T1
A
H3
T3
X2
H1
16
Size 5–8
5
300:5
6
600:5
7
750:5
8
1200:5
wire “C” if control transformer is used. For
separate control voltage source, remove jumpers
“A” and “B” and connect source to control fuse line
terminals.
NEMA & General
Purpose Control
CT RATIO
CONTROL
PRODUCTS
Remove
SIZE
Remove
wire “C” if the contactor coil is to operate
on a voltage other than line voltage or in a separate
control source.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-131
Reversing Heavy Duty Starters
Class 22
Wiring Diagrams
3-Phase Solid State Overload
Solid State Overload
Sizes 0- 1 3/4
Solid State Overload
Sizes 2-4
Solid State Overload
Sizes 5-6
TO SUPPLY
L1
L2
L3
"REV"
CONTACTOR
"FWD"
"FWD"
CONTACTOR
CONTRACTOR
MECHANICAL
INTERLOCK
O.L.
RELAY
CURRENT
TRANSFORMER
(SEE TABLE)
REMOVE WIRE "C" IF THE CONTACTOR
COIL IS TO OPERATE ON A VOLTAGE
OTHER THAN LINE VOLTAGE OR ON A
SEPARATE CONTROL SOURCE.
MOTOR
3-Phase Ambient Compensated Overload
Bimetal Overload
Sizes 2-2 1/2
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Bimetal Overload
Sizes 0-1 3/4
Single Phase Ambient Compensated Overload
3-Wire, 2-Pole Sizes 0-1 3/4
16-132
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Bimetal Overload
Sizes 3-4
Combination Reversing Heavy Duty Starters
Class 25, 26
Wiring Diagrams
3-Phase
Size 0–4
TO SUPPLY
L1 L2 L3
ALTERNATE CONNECTIONS
FOR TRANSFORMER
DISCONNECT or
CIRCUIT BREAKER
A B
10
9
3 7
V FOR W
T1
T2
6
V REV W
C 1 96
4
2
T3
8
5
OVERLOAD RELAY
95
96
CONTROL FUSES
(OPTIONAL)
XF
SEC FUSE
H4
X1
REMOVE WIRE "C" IF CONTROL TRANSFORMER
IS USED. FOR SEPARATE CONTROL VOLTAGE
SOURCE, REMOVE JUMPERS "A" AND "B" AND
CONNECT SOURCE TO CONTROL FUSE LINE TERMINALS.
H2
SEC
T2
T1
M
H3
T3
X2
H1
CONTROL TRANSFORMER
(OPTIONAL)
TO SUPPLY
L1
L2
Size 5–6
L3
16
"REV"
CONTACTOR
"FWD"
"FWD"
CONTACTOR
CONTRACTOR
CONTROL
PRODUCTS
MECHANICAL
INTERLOCK
NEMA & General
Purpose Control
O.L.
RELAY
CURRENT
TRANSFORMER
(SEE TABLE)
REMOVE WIRE "C" IF THE CONTACTOR
COIL IS TO OPERATE ON A VOLTAGE
OTHER THAN LINE VOLTAGE OR ON A
SEPARATE CONTROL SOURCE.
MOTOR
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-133
Two Speed Heavy Duty Starters
Class 30 & 32 Non- Combination and Combination Starters
Wiring Diagrams
1 Winding Constant Horsepower Size 0–13/4
ELEMENTARY DIAGRAM
TO SUPPLY
L1
L2
DISCONNECT or
CIRCUIT BREAKER
DISCONNECT or
CIRCUIT BREAKER
HIGH
B A
T6
OL
HIGH HIGH
LOW
HIGH
LOW
T4
T4
T5
LOW
T1
OL
LOW LOW
A
T2
LOW
T3
T1
T3
6 5
95
2
T6
T2
CONSTANT HORSEPOWER
MOTOR
3
6 LOW
HIGH
5
4
7
V LOW W
3
8
V HIGH W
T5
4
ALL OL'S
96
WIRING DIAGRAM
TO SUPPLY
L1 L2 L3
L3
7 HIGH
LOW
POSITION L1 L2 L3 TOGETHER
LOW SPEED T1 T2 T3 T4 T5 T6
HIGH SPEED T6 T4 T5
HIGH
C 1 96
2
OVERLOAD RELAY
95
96
OVERLOAD RELAY
95
96
T1
T6
8
T2
T3
T4
T5
LOW
CONTROL FUSES
(OPTIONAL)
CONTROL TRANSFORMER
(OPTIONAL)
SEC FUSE
XF
H4
X1
H2
SEC
T1
T2
T3
T4
T5
T6
D68785001
H3
M
X2
H1
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
1 Winding Constant Horsepower Size 2–4
D68785002
1 Winding Constant or Variable Torque Size 0–13/4
ELEMENTARY DIAGRAM
TO SUPPLY
L1
L2
DISCONNECT or
CIRCUIT BREAKER
LOW
LOW
HIGH
T2
T3
HIGH
T6
OL
HIGH HIGH
T4
HIGH
T5
ALL OL'S
95
B A
T1
HIGH
96
DISCONNECT or
CIRCUIT BREAKER
T4
OL
LOW LOW
A
T3
T3
5 LOW 7
4
HIGH
6 5
7
V HIGH W
3
8
V LOW W
T1
4
T2
T5
T6
VARIABLE TORQUE MOTOR
3 HIGH 6
2
T1
T2
T5
T6
CONSTANT TORQUE MOTOR
T4
LOW
POSITION L1 L2 L3 TOGETHER
LOW SPEED T1 T2 T3
HIGH SPEED T6 T4 T5 T1 T2 T3
WIRING DIAGRAM
TO SUPPLY
L1 L2 L3
L3
LOW
C 1 96
2
OVERLOAD RELAY
95
96
8
T6
T4
T5
T1
HIGH
D68784001
CONTROL FUSES
(OPTIONAL)
OVERLOAD RELAY
95
96
T2
T3
XF
CONTROL TRANSFORMER
(OPTIONAL)
SEC FUSE
H4
X1
H2
T1
T2
T3
T4
T5
T6
SEC
H3
M
X2
H1
Note: For separate control voltage source, remove jumpers “A” and “B” and connect source to control fuse terminal. Remove jumper “C” if control transformer is used.
16-134
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Two Speed Heavy Duty Starters
Class 30 & 32 Non- Combination and Combination Starters
Wiring Diagrams
1 Winding Constant or Variable Torque Size 2–4
ELEMENTARY DIAGRAM
TO SUPPLY
L1 L2 L3
DISCONNECT or
CIRCUIT BREAKER
LOW
H
H
T3
HIGH
T5
ALL OL'S
95
2 7
8
V H W
6
T1 T2
3
6
LOW
5 LOW 7
HIGH
T3
OVERLOAD RELAY
95
96
T2
T5
T6
VARIABLE TORQUE MOTOR
LOW
4
V LO W
T1
T3
3 HIGH H
2
1
T4
T4
HIGH
96
T1
T3
T2
T5
T6
CONSTANT TORQUE MOTOR
T6
OL
HIGH HIGH
A B
T1
T2
H
LOW
WIRING DIAGRAM
DISCONNECT or
CIRCUIT BREAKER
T4
OL
LOW LOW
A
TO SUPPLY
L1 L2 L3
8
H
H
V HI W
5
HIGH
POSITION L1 L2 L3 TOGETHER
LOW SPEED T1 T2 T3
HIGH SPEED T6 T4 T5 T1 T2 T3
T6 T4
4
T5
CONTROL FUSES
(OPTIONAL)
1 96
OVERLOAD RELAY
95
96
C
XF
SEC FUSE
H4
X1
H2
T1
T2
T3
T4
T5
T6
SEC
H3
MOTOR
X2
H1
CONTROL TRANSFORMER
(OPTIONAL)
D68784002
16
2 Winding Constant Horsepower & 2 Winding Constant or Variable Torque Size 0–4
CONTROL
PRODUCTS
ELEMENTARY DIAGRAM
TO SUPPLY
L1 L2 L3
LOW
T1
OL
LOW
T2
LOW
T3
HIGH
HIGH
POSITION L1 L2 L3
LOW SPEED T1 T2 T3
HIGH SPEED T11 T12 T13
T3
V LOW W
T12
T12
T13
ALL OL'S
95
T1
5
3
8
V HIGH W
T11
OL
HIGH
HIGH
96
B A
T2
LOW
NEMA & General
Purpose Control
DISCONNECT or
CIRCUIT BREAKER
DISCONNECT or
CIRCUIT BREAKER
A
WIRING DIAGRAM
TO SUPPLY
L1 L2 L3
5 LOW 6
4
HIGH
3 HIGH 7
2
LOW
T1 T2 T3
OVERLOAD RELAY
95
96
T11
T13
TWO WINDING MOTOR
HIGH
2 6
7
4
C 1 96
CONTROL FUSES
(OPTIONAL)
T11 T12 T13
OVERLOAD RELAY
95
96
CONTROL TRANSFORMER
(OPTIONAL)
8
XF
LOW
T1
T2
T3
T11
T12
T13
SEC FUSE
H4
X1
H2
SEC
M
H3
X2
H1
D68786001
Note: For separate control voltage source, remove jumpers “A” and “B” and connect source to control fuse terminal. Remove jumper “C” if control transformer is used.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-135
Reduced Voltage Starters & Pump Panels
Class 36, 37, 88
Wiring Diagrams
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Part Winding
EMT
16-136
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Reduced Voltage Starters & Pump Panels
Class 36, 37, 88
Wiring Diagrams
Auto Transformer
TO SUPPLY
L1 L2 L3
SEK
SES
SAW
LMB
SEK
SES
SAW
LMB
SEK
SES
SAW
LMB
OPTIONAL
DISCONNECT
OR
CIRCUIT BREAKER
OL
1S
3L1
0%
50%
1L1
R
65%
1CT
80%
2S
L2 L3
100%
L1
T1
2L1
OL
0%
50%
65%
80%
R
1S
3L2
1L2
100%
2S
2CT
*
T2
2L2
FOR MOTOR
HP SEE
CONTROLLER
NAMEPLATE
MOTOR
OL
4FU
71
MR
73
1S
0%
50%
65%
3L3
80%
R
FOR STARTER
SIZES 1-4, 1CT-3CT
ARE NOT USED.
L1
1L3
100%
2S
3CT
T3
2L3
1S
74
(A1)
R
75
(A2)
2S
76
MR
5FU
72
L2
2S
CR1
77
(A1)
(A2)
1S
*
CR1
L1
H1
(A2)
R
H4
3FU
L2
CPT
X2
X1
CONNECT
VOLTAGE
AS SPECIFIED
PER NAMEPLATE
2
3
2
LMB
SAW
SES
SEK
1
X2
TR
SUPPLIED AS REQUIRED
3
LMB
SAW
SES
SEK
NOTE E
CONTROL
PRODUCTS
JUMPER
79
MECH
INTLK
(A1)
16
1FU
12
TAS
1
2FU
78
1S
(A1)
(A2)
MR
4
(95)
OL
(96)
3
MR
TR
6
(A1)
(A2)
CR1
NOTC
Note E:
Remove jumper if thermal
protection switch is provided.
HAND
*
2
3
1PB
OFF
AUTO
(A2)
(A1)
CR2
(A2)
3
2PB
5
1SS
HAND
AUTO
CONTACT
*
3
4
ETM
OFF
AUTO
1
RUN/ON/
RUNNING
3
4
3
5
1
(A1)
2PB
START
2
1
1
*
SURGE SUPPRESSOR
START
STOP
1
NEMA & General
Purpose Control
CONNECTIONS FOR OPTIONAL DEVICES
1SS
*
OFF
1LT
AUTO
CONTACT
OL
OL TRIPPED
9
X2
MR
OFF/STOP
X2
10
1
4LT
ON
1
1SS
*
3
1
5LT
OPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-137
Reduced Voltage Starters & Pump Panels
Class 36, 37, 88
Wiring Diagrams
Wye Delta (Open Transition)
CUSTOMER'S
INC. LINE
Aÿ Bÿ Cÿ
OPTIONAL
DISCONNECT
OR
CIRCUIT BREAKER
OL
1L1
1M
T1
2M
T6
1M
T2
T1
1CT
T6
OL
1L2
T1
T6
T2
S
2CT
S
S
2M
T3
T4
T4
S
T5
1M
1L3
T4
T5
OL
T2
T3
T3
3CT
2M
T5
FOR STARTER
SIZES 1-4, 1CT-3CT
ARE NOT USED.
1L1
1L2
4FU
50
MR
2M
51
CR1
52
53
(A1)
54
(A2)
MR
55
S
S
S
56
57
*
5FU
MECH
(A1)
(A2)
INTERLOCK
2M
1M
(A1)
(A2)
1M
SUPPLIED AS REQUIRED
3FU
2FU
H1
1FU
CONTROL
PRODUCTS
16
1
H3 H2
H4
CPT
1X1
X1
X2
CONNECT
VOLTAGE
AS SPECIFIED
PER NAMEPLATE
X2
TR
1
3
2
2
MR
(A1)
TR
3
OL
4
(A2)
MR
(A1)
6
X2
(96)
(95)
(A2)
CR1
NCTO
NEMA & General
Purpose Control
CONNECTIONS FOR OPTIONAL DEVICES
2
3
1PB
OFF
HAND
AUTO
*
(A2)
(A1)
START
CR2
(A2)
3
2PB
5
1SS
HAND
AUTO
CONTACT
*
3
4
ETM
OFF
AUTO
1
RUN/ON/
RUNNING
3
4
3
5
1
(A1)
2PB
2
1
1
*
SURGE SUPPRESSOR
START
STOP
1
1SS
*
OFF
1LT
AUTO
CONTACT
OL
OL TRIPPED
9
X2
MR
OFF/STOP
10
X2
1
4LT
ON
1
1SS
*
3
1
5LT
OPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTS
16-138
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Reduced Voltage Starters & Pump Panels
Class 36, 37, 88
Wiring Diagrams
Wye Delta (Closed Transition)
CUSTOMER'S
INC. LINE
Aÿ Bÿ Cÿ
OPTIONAL
DISCONNECT
OR
CIRCUIT BREAKER
OL
1M
T1
T1
1CT
1L1
3L1
RES A
1A
2M
T6
OL
1M
1L2
3L2
2CT
RES B
T1
T6
T2
T2
S
1A
S
S
2M
T3
T4
S
T5
1M
1L3
T4
T5
OL
T3
3CT
3L3
RES C
2M
T2
T3
1A
FOR STARTER
SIZES 1-4, 1CT-3CT
ARE NOT USED.
1L2
1L1
4FU
50
MR
2M
51
CR1
52
53
(A1)
(A2)
MR
54
55
5FU
1A
1A
S
S
57
56
(A1)
58
(A1)
(A2)
S
*
MECH
(A2)
INTERLOCK
2M
1M
(A1)
(A2)
1M
SUPPLIED AS REQUIRED
3FU
2FU
1FU
1
H3 H2
H4
CPT
1X1
X1
X2
6
X2
(A1)
CONTROL
PRODUCTS
TR
CONNECT
VOLTAGE
AS SPECIFIED
PER NAMEPLATE
16
H1
(A2)
CR1
NCTO
TR
1
3
2
2
MR
(A1)
MR
4
(A2)
OL
(96)
(95)
X2
3
CONNECTIONS FOR OPTIONAL DEVICES
3
5
1SS
HAND
(A1)
CR2
(A2)
3
AUTO
CONTACT
*
3
4
ETM
OFF
AUTO
1
RUN/ON/
RUNNING
3
4
3
5
1
START
2PB
1
*
(A2)
2PB
2
1
(A1)
NEMA & General
Purpose Control
2
1PB
OFF
HAND
AUTO
*
SURGE SUPPRESSOR
START
STOP
1
1SS
*
OFF
1LT
AUTO
CONTACT
OL
OL TRIPPED
9
X2
MR
OFF/STOP
X2
10
1
4LT
ON
1
1SS
*
3
1
5LT
OPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-139
Heavy Duty Contactors and Reversing Contactors
Class 40, 43
Wiring Diagrams
3-Phase Magnetic Contactors and Reversing Contactors
3-Phase Contactors—Size 00–4
3-Phase Reversing Contactors—Size 00–4
3-Phase Contactors—Size 5, 6
3-Phase Reversing Contactors—Size 5, 6
TO SUPPLY
L1
L2
L3
"REV"
CONTACTOR
"FWD"
"FWD"
CONTACTOR
CONTRACTOR
MECHANICAL
16
INTERLOCK
CONTROL
PRODUCTS
NEMA & General
Purpose Control
RELAY
CURRENT
TRANSFORMER
REMOVE WIRE "C" IF THE CONTACTOR
COIL IS TO OPERATE ON A VOLTAGE
OTHER THAN LINE VOLTAGE OR ON A
SEPARATE CONTROL SOURCE.
LOAD
Single Phase Magnetic Contactors and Reversing Contactors
Single Phase Contactors—Size 00–4
16-140
Single Phase Reversing Contactors—Size 00–1P
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Duplex Heavy Duty Controllers
Class 83, 84
Standard Duplex Pump Panel (92)
Wiring
Duplex Panel w/o alternator (95)
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-141
Duplex Heavy Duty Controllers
Class 83, 84
Wiring
Duplex Panel with Lead Pump Transfer Switch (94)
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Duplex Panel with Relay Alternation (93)
16-142
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Standard Pump Panels & Current Sensitive Relays
Class 87, 97
Wiring
Standard Pump Panel
Current Sensitive Relay
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-143
Lighting and Heating Contactors
Electrically Held, Class LE
20 AMP
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
30 – 100 AMP
200 – 400 AMP
16-144
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Wiring Diagrams
Lighting and Heating Contactors
Mechanically Latched 20 Amp, Class CLM
ON
Wiring Diagrams
OFF
L
CONTACTOR CONTROL
VOLTAGE
OFF
L
ON
C
COMMON OR SEPARATE
CONTROL LINES
5
ON
2
CR1
3
CR2
L
CR2
CR1
0
CR1
CR2
C
ON
0
OFF
CONTROL
MODULE
VOLTAGE
OFF
4
TYPICAL OFF-ON
SELECTOR SWITCH
COIL
PILOT LIGHTS
REQUIRE (1) EA.
CLM4097291
AUXILIARY
CONTACT KIT.
3 WIRE CONTROL ACC. 48
ON
CONTACTOR CONTROL
VOLTAGE
OFF
OFF
HAND
OFF
AUTO
5
CR
CR
5
CR2
0
3
CONTROL
MODULE
VOLTAGE
3
OFF
L
CR
C
L
CR1
0
CR1
C
2
CONTROL
MODULE
VOLTAGE
COIL
4
L
CONTACTOR CONTROL
VOLTAGE
L
CR1
CR2
COIL
4
REMOTE
CONTROL
ON
ON
ON-OFF (FORM 3) CONTROL ACC. 49
2 WIRE CONTROL ACC. 47
CONNECTIONS TO CONTROL MODULES
CONTACTOR CONTROL
VOLTAGE
MODULE
TERMINAL
L
OFF
1
5
L
ON-OFF
CONTROL
MODULE
VOLTAGE
CR
0
CR
C
3
CR
NOT USED
CONT. STATION FOR ACC. 48 & 49
3
CONT. STATION FOR ACC. 47,48 & 49
4
MODULE CONTROL VOLTAGE *
5
CONTACTOR CONTROL VOLTAGE
O
" CONTACTOR
"
TERMINAL O ON
COIL
4
ON
2 WIRE CONTROL ACC. 47
2
CONNECT TO:
C
" CONTACTOR
"
TERMINAL C ON
16
* FOR 24 VDC CONTROL MODULES
CONNECT TERMINAL 4 TO NEGATIVE (-)
CONTROL
PRODUCTS
NEMA & General
Purpose Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-145
Lighting and Heating Contactors
Mechanically Latched 30–400 Amps, Class CLM
Mechanically Latched, CLM 30–200
Connection Diagram for Common/Separate
Control with Momentary Pushbutton or
ON-OFF Selector Switch CLMOC, CLMOD,
CLMOE, and CLMOF
Connection for 2-Wire Control CLMOC,
CLMOD, CLMOE, and CLMOF
Connection for Hand/Off/Auto Control
CLMOC, CLMOD, CLMOE, and CLMOF
Mechanically Latched Type CLM 300 and 400 Amp
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Wiring Diagrams
Amps
Connection Diagram for Common/Separate
Control with Momentary Pushbutton or
ON-OFF Selector Switch CLMOG and
CLMOH
Connection for 2-Wire Control CLMOG and
CLMOH
Control
relay is required for 2-wire and Hand/Off/Auto
Control, as shown in diagram.
16-146
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Connection for Hand/Off/Auto Control
CLMOG and CLMOH
Industrial Control Power Transformers
Class MT, MTG
Wiring Diagrams
Voltage Letter
A햲햴
Voltage Letter
B햳 햴
Voltage Letter
C햳 햴
When secondary fuse clips are installed,
Terminal X1 becomes XF
When secondary fuse clips are installed,
Terminal X1 becomes XF
Voltage Letter
D햳
Voltage Letter
E햲 햴
When secondary fuse clips are installed,
Terminal X1 becomes XF
When secondary fuse clips are installed,
Terminal X1 becomes XF
Voltage Letter
G햲
Voltage Letter
H
Voltage Letter
I
When secondary fuse clips are installed,
Terminal X1 becomes XF
Does not include secondary fuse clips
Does not include secondary fuse
clips
Voltage Letter
J 햳햴
Voltage Letter
L
Voltage Letter
M햲
When secondary fuse clips are installed,
Terminal X3 becomes XF
Does not include secondary fuse clips
When secondary fuse clips are
installed, Terminal X1 becomes XF
Voltage Letter
F햲
When secondary fuse clips are
installed, Terminal X1 becomes XF
16
CONTROL
PRODUCTS
NEMA & General
Purpose Control
When secondary fuse clips are
installed, Terminal X1 becomes XF
Voltage Letter
P
H1
햲
햳
햴
Includes secondary fuse clips on sizes 50-750VA
Includes secondary fuse clips on sizes 50-500VA
Secondary fuse clips are not included on MTG
transformers.
X2
380V
24V
H2
X1
Does not include secondary fuse clips
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-147
Overload Relay Heater Tables
Selection of Heater Elements for Overload Relays
Use only when motor full load
current is not known. Motor amps
will vary depending on the type and
manufacturer of the motor. These
average values, for motors with service
factor of 1.15, are to be used only as a
guide. The formulas at the bottom of the
page may be used to obtain approximate
amps for other motors.
Note: RPM shown for 60 cycle motors.
For 50 cycle motors, multiply RPM by .83.
3-Phase
1
⁄4
1
⁄3
1
⁄2
3
⁄4
CONTROL
PRODUCTS
16
1
11⁄2
2
NEMA & General
Purpose Control
3
5
71⁄2
10
15
20
50 Hz
Syn
Speed
RPM
200
Volts
230
Volts
460
Volts
575
Volts
1800
1200
900
1800
1200
900
1800
1200
900
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
1.09
1.61
1.84
1.37
1.83
2.07
1.98
2.47
2.74
2.83
3.36
3.75
3.22
4.09
4.32
4.95
5.01
5.59
6.07
6.44
6.44
7.36
7.87
9.09
9.59
10.8
11.7
13.1
15.5
16.6
18.2
18.3
22.4
24.7
25.1
26.5
29.2
30.8
32.2
35.1
41.9
45.1
47.6
51.2
58.0
58.9
60.7
63.1
0.95
1.40
1.60
1.19
1.59
1.80
1.72
2.15
2.38
2.46
2.82
3.26
2.80
3.56
3.76
4.30
4.36
4.86
5.28
5.60
5.60
6.40
6.84
7.90
8.34
9.40
10.2
11.4
13.5
14.4
15.8
15.9
19.5
21.5
21.8
23.0
25.4
25.8
28.0
30.5
36.4
39.2
41.4
44.5
50.4
51.2
52.8
54.9
0.48
0.70
0.80
0.60
0.80
0.90
0.86
1.08
1.19
1.23
1.46
1.63
1.40
1.78
1.88
2.15
2.18
2.43
2.64
2.80
2.80
3.20
3.42
3.95
4.17
4.70
5.12
5.70
5.76
7.21
7.91
7.92
9.79
10.7
10.9
11.5
12.7
13.4
14.0
15.2
18.2
19.6
20.7
22.2
25.2
25.6
26.4
27.4
0.38
0.56
0.64
0.48
0.64
0.72
0.69
0.86
0.95
0.98
1.17
1.30
1.12
1.42
1.50
1.72
1.74
1.94
2.11
2.24
2.24
2.56
2.74
3.16
3.34
3.76
4.10
4.55
5.41
5.78
6.32
6.33
7.81
8.55
8.70
9.19
10.1
10.7
11.2
12.2
14.5
15.7
16.5
17.8
20.1
20.5
21.1
21.9
Formula—Approximate Full Load Amps
for Other Motors
208 Volt Full Load Amp 앒 230 Volt current ҂ 110%
2-Phase FLA 앒 0.866 ҂ the 3-Phase FLA
2-Phase, 3-wire current in common wire 앒 1.41 ҂ that in
the other 2 lines
16-148
1-Phase
Full Load Current (60Hz)
Hp
1
⁄8
1
⁄4
1
⁄3
1
⁄2
3
⁄4
1
1 1⁄2
2
3
5
7 1⁄2
10
115 Volts
230 Volts
4.4
5.8
7.2
9.8
13.8
16
20
24
34
56
80
100
2.2
2.9
3.6
4.9
6.9
8
10
12
17
28
40
50
3-Phase
Full Load Current (60Hz)
Hp
General
CAUTION: Actual motor amps may be
higher or lower than the values listed
below for a particular motor. For more
reliable motor protection, select heater
elements by using the full load motor
nameplate amps.
Single Phase motor full load amps of
the same horsepower, voltage and speed
vary over wide ranges. The following
table conforms with table 430.148 of
the NEC.
380
Volts
0.55
0.81
0.93
0.64
0.92
1.04
0.99
1.24
1.38
1.42
—
1.88
1.70
2.06
2.28
2.60
2.69
2.94
3.20
3.39
3.39
3.84
4.14
4.77
5.02
5.70
6.20
6.80
8.20
8.74
9.59
9.60
11.50
13.00
13.20
13.90
15.40
16.30
16.90
18.50
22.00
23.70
25.00
26.90
30.50
31.00
31.90
33.20
Full Load Current (60Hz)
Hp
25
30
40
50
60
75
100
125
150
200
250
300
400
50 Hz
Syn
Speed
RPM
200
Volts
230
Volts
460
Volts
575
Volts
380
Volts
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
1800
1200
1800
69.9
74.5
75.4
77.4
84.8
86.9
90.6
94.1
111
116
117
121
138
143
145
150
164
171
173
177
206
210
212
222
266
271
275
290
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
60.8
64.8
65.6
67.3
73.7
75.6
78.8
81.8
96.4
101
102
105
120
124
126
130
143
149
150
154
179
183
184
193
231
236
239
252
292
293
298
305
343
348
350
365
458
452
460
482
559
568
573
600
278
684
896
30.4
32.4
32.8
33.7
36.8
37.8
39.4
40.9
48.2
50.4
50.6
52.2
60.1
62.2
63.0
65.0
71.7
74.5
75.0
77.0
89.6
91.6
92.0
96.5
115
118
120
126
146
147
149
153
171
174
174
183
229
226
230
241
279
284
287
300
339
342
448
24.3
25.9
26.2
27.0
29.4
30.2
31.5
32.7
38.5
40.3
40.4
41.7
48.2
49.7
50.4
52.0
57.3
59.4
60.0
61.5
71.7
73.2
73.5
77.5
92.2
94.8
95.6
101
116
117
119
122
137
139
139
146
184
181
184
193
223
227
229
240
271
274
358
36.80
39.20
39.60
40.70
—
45.70
47.60
49.50
—
61.00
61.20
63.20
—
75.20
76.20
78.50
—
90.00
91.10
93.10
—
111.00
112.00
117.00
—
144.00
145.00
153.00
—
177.00
180.00
186.00
—
210.00
210.00
211.00
—
274.00
276.00
279.00
—
343.00
345.00
347.00
392.00
395.00
—
25Hz 1500 RPM, amps 앒 amps of 60Hz, 3600 RPM
25Hz 750 RPM, amps 앒 amps of 60Hz, 1800 RPM
Service factor 1.0 앒 amps ҂ 0.9
50°C–55°C motor 앒 amps ҂ 0.9
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Overload Relay Heater Tables
Selection of Heater Elements for Overload Relays
General
To Select Heater Catalog Number Use
2. Refer to the specified table and use
▪
▪
▪
▪
the controller size and motor amps to
select the heater catalog number.
a. If motor amps are not known, an
approximate value may be found on
the previous page. These values
should be used with caution and only
when motor amps are not available.
Heaters shown on the following pages
provide a maximum trip rating of 125%
of minimum motor amperes for 40˚C
motors (service factor 1.15). For other
motors (service factor 1.0), select the
next lower listed heater catalog number
within the designated table which
provides a maximum trip rating of
approximately 115%.
Product Class
Controller Size
Motor Amp
Phase
Catalog No 14 C P 3 2 B C 81
Phase
Size
Class
1. Find heater table number below,
using the Product Class, Controller
Size and Phase. Heater table number
is found in the column under the type
of overload and phase.
Overload relays do not provide
protection against short circuits.
To ensure proper coordination with
short circuit protective device, select
heaters from the information packaged
with the control device.
Heater Table Number
Size
or
Amperage
Controller
Size
Letter
Bimetal Standard Trip (Class 20)
Bimetal Quick Trip (Class 10)
Compensated
E Heaters
Green Reset
Compensated
K Heaters
Green Reset
Class
Description
SMF
Manual
All
—
14, 22
Magnetic
Non-reversing,
Reversing
00-4
B–J
213
233
313
332
0-4
C-J
—
233
—
332
25-180A
D–J
216
238
316
335
1Ph
3Ph
CONTROL
PRODUCTS
48
Combination
Reversing Combination
Multi Speed
Pump Controllers
Motor Control Centers
Panel Mounted
Overload Relay
3Ph
See Page 16-150
16
17, 18
25, 26
30, 32
83, 84
87, 89
1Ph
NEMA & General
Purpose Control
ESP100 starters do not require heater elements.
Overload
Relay Selection Multi-Speed
Each speed requires a separate set of overloads. The
adjustment range must be selected on the basis of the
full-load current for each particular speed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-149
Manual Control
Heater Elements, Class SMF
General
Ordering Information
1. Determine number of heater elements required from Table A.
2. Determine motor full load current and service factor.
NOTE: If motor amps are unknown, an approximate value may be found on page 16-148. These values
should be used with caution and only when motor amps are not available.
3. If the motor and controller are in the same ambient temperature:
a. For 1.15 to 1.25 service factor motors use 100% of motor full load current for heater element selection.
b. For 1.0 service factor motors use 90% of motor full load current for heater element selection.
4. If the motor and controller are in different ambient temperatures multiply motor full load current by the multiplier in
Table B. Use the resultant full load current for heater element selection.
Heater Elements Class SMF
5. Select proper heater element from table below.
6. All tables are based on the operation of the motor and controller in the same ambient temperature, 40°C (104°F) or
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
less. Always be certain the correct heater element is installed in the starter before operating the motor.
Heater
Catalog Number
Motor Full-Load
Current (Amps)
List
Price $
Heater
Catalog Number
Motor Full-Load
Current (Amps)
List
Price $
SMFH01
SMFH02
SMFH03
SMFH04
SMFH05
SMFH06
SMFH07
SMFH08
SMFH09
SMFH10
SMFH11
SMFH12
SMFH13
SMFH14
SMFH15
SMFH16
SMFH17
SMFH18
SMFH19
SMFH20
SMFH21
SMFH22
SMFH23
SMFH24
SMFH25
SMFH26
0.157–0.173
0.174–0.192
0.193–0.212
0.213–0.235
0.236–0.261
0.262–0.289
0.290–0.321
0.322–0.355
0.356–0.399
0.41–0.44
0.45–0.49
0.50–0.53
0.54–0.58
0.59–0.65
0.66–0.71
0.72–0.78
0.79–0.85
0.86–0.96
0.97–1.04
1.05–1.16
1.17–1.25
1.30–1.39
1.38–1.54
1.48–1.63
1.57–1.75
1.66–1.86
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
SMFH27
SMFH28
SMFH29
SMFH30
SMFH31
SMFH32
SMFH33
SMFH34
SMFH35
SMFH36
SMFH37
SMFH38
SMFH39
SMFH40
SMFH41
SMFH42
SMFH43
SMFH44
SMFH45
SMFH46
SMFH47
SMFH48
SMFH49
SMFH50
SMFH51
SMFH52
1.80–1.99
1.96–2.15
2.16–2.38
2.39–2.75
2.76–2.84
2.85–3.06
3.07–3.45
3.46–3.70
3.71–4.07
4.08–4.32
4.33–4.90
4.91–5.35
5.36–5.85
5.86–6.41
6.42–6.79
6.80–7.57
7.58–8.15
8.16–8.98
8.99–9.67
9.68–9.95
9.96–10.8
10.9–12.1
12.2–13.1
13.2–13.9
14.0–15.0
15.1–16.0
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Table A
Number of Heater Elements
Device
SMFF*1
SMFF*2
SMFF*3
SMFF*4
SMFF*5
SMFF*6
SMFF*22
SMFF*44
SMFF*11
SMFF*22
16-150
Number of
Heater Elements
1
2
2
Table B—Special Applications
Heater Element Selection
Notes
Ambient Temperature of Motor
All single pole and two pole SMF
starters require only 1 Heater
Element.
Same as
Controller
Ambient
Duplex Unit. One Heater Element
per starter.
Two Speed Starter. One Heater
Element per speed.
Continuous
Duty Motor
Service Factor
1.15 to 1.25
1.0
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Constant 10°C
(18°F) Higher
Than Controller
Ambient
Constant 10°C
(18°F) Lower
Than Controller
Ambient
Full Load Current Multiplier
1.0
0.9
0.9
0.8
1.05
0.95
Discount Schedule NEMA
Overload Relay Heater Tables
Full Load Motor Amps, Single Phase, Trip Class 20 – Tables 213, 216
Table 213 for Class 14, 22 (1-Phase)
Full Load Amps
0.37–0.40
0.41–0.44
0.45–0.47
0.48–0.52
0.53–0.57
0.58–0.62
0.63–0.69
0.70–0.74
0.75–0.81
0.82–0.85
0.86–0.93
0.94–1.03
1.04–1.11
1.12–1.22
1.23–1.34
1.35–1.53
1.54–1.71
1.72–1.92
1.93–2.12
2.13–2.24
2.25–2.43
2.44–2.57
2.58–2.86
2.87–3.16
3.17–3.35
3.36–3.58
3.59–3.90
3.91–4.25
4.26–4.77
4.78–5.35
5.36–5.76
5.77–6.33
6.34–6.98
6.99–7.37
7.38–7.71
7.72–8.51
8.52–9.31
9.32–10.1
10.2–10.9
11.0–12.2
12.3–13.5
13.6–15.7
15.8–17.3
17.4–19.9
20.0–21.7
21.8–23.4
23.5–24.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
19.4–22.0
22.1–23.5
23.6–25.0
25.1–27.0
27.1–28.9
29.0–31.0
31.1–34.8
34.9–36.9
37.0–43.9
44.0–46.0
46.1–48.3
48.4–55.0
55.1–60.0
E3
E4
E5
E6
E7
E8
E9
E11
E12
E13
E14
E16
E17
E18
E23
E24
E26
E27
E28
E29
E31
E32
E33
E34
E36
E37
E38
E39
E41
E42
E44
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E60
E61
E62
E65
E66
E67
E69
E70
E72
E73
E74
E76
—
0.41–0.44
0.45–0.47
0.48–0.52
0.53–0.57
0.58–0.62
0.63–0.69
0.70–0.74
0.75–0.81
0.82–0.85
0.86–0.93
0.94–1.03
1.04–1.11
1.12–1.22
1.23–1.34
1.35–1.53
1.54–1.71
1.72–1.92
1.93–2.12
2.13–2.24
2.25–2.43
2.44–2.57
2.58–2.86
2.87–3.16
3.17–3.35
3.36–3.58
3.59–3.90
3.91–4.25
4.26–4.77
4.78–5.35
5.36–5.76
5.77–6.33
6.34–6.98
6.99–7.37
7.38–7.71
7.72–8.51
8.52–9.31
9.32–10.1
10.2–10.9
11.0–12.2
12.3–13.5
13.6–15.7
15.8–17.3
17.4–19.9
20.0–21.7
21.8–23.4
23.5–23.7
23.8–25.1
25.2–27.9
28.0–32.2
32.3–34.0
—
—
—
—
Discount Schedule NEMA
Full Load Amps
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
48DA, 48GA 48HA
48JA
Heater
Catalog No
0.34–0.36
0.37–0.40
0.41–0.43
0.44–0.47
0.48–0.51
0.52–0.56
0.57–0.62
0.63–0.67
0.68–0.73
0.74–0.77
0.78–0.84
0.85–0.93
0.94–1.00
1.01–1.10
—
1.11–1.21
1.22–1.38
1.39–1.54
1.55–1.73
1.74–1.91
1.92–2.02
2.03–2.19
2.20–2.32
2.33–2.58
2.59–2.85
2.86–3.02
3.03–3.23
3.24–3.52
3.53–3.83
3.84–4.30
4.31–4.82
4.83–5.19
5.20–5.71
5.72–6.29
6.30–6.64
6.65–6.95
6.96–7.67
7.68–8.39
8.40–9.19
9.20–9.94
9.95–10.9
11.0–12.2
12.3–14.2
14.3–15.6
—
15.7–17.9
18.0–19.6
19.7–22.3
22.4–24.0
24.1–25.9
26.0–29.5
29.6–32.5
32.6–33.5
33.6–36.9
37.0–39.2
39.3–43.1
43.2–47.4
47.5–50.0
50.1–55.2
55.3–60.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
50.0–55.9
56.0–60.9
61.0–65.9
66.0–69.9
70.0–75.9
76.0–81.9
82.0–86.9
87.0–92.9
93.0–97.9
98.0–107.9
108.0–113.9
114.0–125.0
126.0–138.0
139.0–153.0
154.0–163.0
164.0–180.0
E3
E4
E5
E6
E7
E8
E9
E11
E12
E13
E14
E16
E17
E18
E19
E23
E24
E26
E27
E28
E29
E31
E32
E33
E34
E36
E37
E38
E39
E41
E42
E44
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E59
E60
E61
E62
E65
E66
E67
E69
E70
E71
E72
E73
E74
E76
E77
E78
E79
E80
E88
E89
E91
E92
E93
E94
E96
E97
E98
E99
E101
E102
E103
E104
E106
E107
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
27.1–30.0
30.1–33.2
33.3–35.7
35.8–39.4
39.5–43.4
43.5–46.9
47.0–51.5
51.6–57.0
57.1–62.8
62.9–69.1
69.2–75.0
75.1–83.3
—
—
—
—
—
—
83.4–86.9
87.0–92.9
93.0–100.0
—
—
—
—
—
—
—
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA & General
Purpose Control
Heater
Catalog No
CONTROL
PRODUCTS
Size 2, 21⁄2
Table 216 for Class 48
16
Size 00, 0, 1 Size 1P
Selection
16-151
Overload Relay Heater Tables
Full Load Motor Amps, 3-Phase, Trip Class 20 – Tables 233, 238
Table 233 for Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87 (3-Phase)
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Full Load Amps
Size 00, 0, 1 Size 13⁄4
Size 2, 21⁄2
Size 3, 31⁄2
Size 4
Heater
Catalog No
0.38–0.40
0.41–0.43
0.44–0.48
0.49–0.53
0.54–0.57
0.58–0.62
0.63–0.66
0.67–0.72
0.73–0.80
0.81–0.85
0.86–0.92
0.93–0.99
1.00–1.08
1.09–1.23
1.24–1.37
1.38–1.54
1.55–1.69
1.70–1.80
1.81–1.94
1.95–2.07
2.08–2.26
2.27–2.54
2.55–2.69
2.70–2.88
2.89–3.14
3.15–3.40
3.41–3.81
3.82–4.26
4.27–4.62
4.63–5.09
5.10–5.61
5.62–5.91
5.92–6.15
6.16–6.70
6.71–7.54
7.55–8.29
8.30–8.99
9.00–9.85
9.86–10.4
10.5–12.0
12.1–13.6
13.7–15.6
15.7–17.0
17.1–18.4
18.5–19.4
19.5–21.3
21.4–24.4
24.5–25.9
26.0–27.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
10.5–12.0
12.1–13.6
13.7–15.6
15.7–17.1
17.2–19.4
19.5–20.9
21.0–22.2
22.3–25.3
25.4–26.9
27.0–30.2
—
30.3–33.3
33.4–35.3
—
35.4–41.5
41.6–45.0
45.1–52.3
52.4–55.7
55.8–60.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30.0–33.5
33.6–36.4
36.5–39.6
—
39.7–43.6
43.7–46.5
46.6–51.6
51.7–54.4
54.5–58.0
58.1–63.0
63.1–67.7
67.8–72.4
—
—
—
—
—
72.5–80.0
80.1–88.1
88.2–91.5
91.6–96.8
96.9–99.0
99.1–108.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
56.9–60.9
61.0–63.9
64.0–67.7
67.8–72.4
72.5–77.7
77.8–85.9
86.0–91.9
92.0–96.7
96.8–105
—
—
106–115
116–130
E6
E7
E8
E9
E11
E12
E13
E14
E16
E17
E18
E19
E23
E24
E26
E27
E28
E29
E31
E32
E33
E34
E36
E37
E38
E39
E41
E42
E44
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E60
E61
E62
E65
E66
E67
E69
E70
E71
E72
E73
E73A
E74
E76
E77
E78
E79
E80
E88
E89
E91
E92
E93
E94
E96
E97
E98
E99
E101
E102
E103
E104
16-152
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.27–2.54
2.55–2.69
2.70–2.88
2.89–3.14
3.15–3.40
3.41–3.81
3.82–4.25
4.26–4.62
4.63–5.09
5.10–5.61
5.62–5.91
5.92–6.15
6.16–6.70
6.71–7.54
7.55–8.29
8.30–8.99
9.00–9.85
9.86–10.4
10.5–12.0
12.1–13.6
13.7–15.6
15.7–17.0
17.1–19.4
19.5–20.9
21.0–22.2
22.3–25.3
25.4–26.9
27.0–30.2
—
30.3–33.3
33.4–36.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Selection
Table 238 for Class 48
Full Load Amps
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
48DC
48GC
48HA
48JA
Heater
Catalog No
0.30–0.32
0.33–0.35
0.36–0.38
0.39–0.41
0.42–0.44
0.45–0.49
0.50–0.54
0.55–0.58
0.59–0.63
0.64–0.67
0.68–0.73
0.74–0.81
0.82–0.87
0.88–0.94
0.95–1.00
1.01–1.10
1.11–1.26
1.27–1.40
1.41–1.58
1.59–1.74
1.75–1.85
1.86–1.99
2.00–2.11
2.12–2.31
2.32–2.59
2.60–2.75
2.76–2.95
2.96–3.21
3.22–3.48
3.49–3.89
3.90–4.35
4.36–4.73
4.74–5.21
5.22–5.74
5.75–6.05
6.06–6.46
6.47–6.95
6.96–8.09
8.10–9.29
9.30–10.4
—
10.5–10.9
11.0–12.0
12.1–14.5
14.6–16.8
16.9–18.4
18.5–20.9
21.0–22.5
22.6–24.3
24.4–27.2
27.3–29.2
29.3–30.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16.9–18.4
18.5–20.9
21.0–22.5
22.6–24.7
24.8–27.2
27.3–29.2
29.3–32.0
32.1–34.9
—
35.0–37.8
37.9–41.7
41.8–45.9
46.0–49.0
49.1–54.2
54.3–60.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
27.1–30.0
30.1–33.2
33.3–35.7
35.8–39.4
39.5–43.4
43.5–46.9
—
47.0–51.5
51.6–57.0
57.1–62.8
62.9–69.1
69.2–75.0
75.1–83.3
—
—
—
—
—
—
83.4–86.9
87.0–92.9
93.0–100.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
50.0–55.9
56.0–60.9
61.0–65.9
66.0–69.9
70.0–75.9
76.0–81.9
82.0–86.9
87.0–92.9
93.0–97.9
98.0–107.9
108–113.9
114–125.9
126–138.9
139–153.9
154–163.9
164–180.9
E3
E4
E5
E6
E7
E8
E9
E11
E12
E13
E14
E16
E17
E18
E19
E23
E24
E26
E27
E28
E29
E31
E32
E33
E34
E36
E37
E38
E39
E41
E42
E44
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E60
E61
E62
E65
E66
E67
E69
E70
E71
E72
E73
E73A
E74
E76
E77
E78
E79
E80
E88
E89
E91
E92
E93
E94
E96
E97
E98
E99
E101
E102
E103
E104
E106
E107
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Discount Schedule NEMA
Overload Relay Heater Tables
Full Load Motor Amps, Single Phase, Trip Class 10 – Tables 313, 316
Table 313 for Class 14, 22 (1-Phase)
Full Load Amps
Size 2, 21⁄2
Heater
Catalog No
1.85–2.05
2.06–2.35
2.36–2.64
2.65–2.96
2.97–3.31
3.32–3.51
3.52–3.87
3.88–4.31
4.32–4.79
4.80–5.21
5.22–5.75
5.76–6.11
6.12–6.95
6.96–7.73
7.74–8.47
8.48–9.52
9.53–10.4
10.5–11.1
11.2–12.4
12.5–13.5
13.6–15.1
15.2–16.6
16.7–17.6
17.7–18.8
18.9–21.6
21.7–22.7
22.8–25.3
—
—
—
—
—
—
—
—
—
—
—
1.85–2.05
2.06–2.35
2.36–2.64
2.65–2.96
2.97–3.31
3.32–3.51
3.52–3.87
3.88–4.31
4.32–4.79
4.80–5.21
5.22–5.75
5.76–6.11
6.12–6.95
6.96–7.73
7.74–8.47
8.48–9.52
9.53–10.4
10.5–11.1
11.2–12.4
12.5–13.5
13.6–15.1
15.2–16.6
16.7–17.6
17.7–18.8
18.9–21.6
21.7–22.7
22.8–25.3
25.4–26.6
26.7–30.1
30.2–33.0
33.1–34.1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
18.7–19.7
19.8–21.3
21.4–22.8
22.9–24.2
24.3–26.5
26.6–29.3
29.4–32.0
32.1–35.6
35.7–37.9
38.0–40.3
40.4–44.3
44.4–49.5
49.6–52.1
52.2–53.7
53.8–60.0
K21
K22
K24
K27
K28
K29
K31
K32
K33
K34
K36
K37
K39
K41
K42
K43
K49
K50
K52
K53
K54
K55
K57
K58
K60
K61
K62
K63
K64
K67
K68
K69
K70
K72
K73
K74
K75
K76
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
48DA
48GA
48HA
48JA
Heater
Catalog No
1.69–1.88
1.89–2.05
2.06–2.21
2.22–2.44
2.45–2.70
2.71–2.92
2.93–3.27
3.28–3.56
3.57–3.83
3.84–4.23
4.24–4.57
4.58–4.97
4.98–5.67
5.68–6.11
6.12–6.91
6.92–7.65
7.66–8.4
8.5–8.9
9.0–10.1
10.2–11.2
11.3–12.3
12.4–13.3
13.4–14.1
14.2–15.0
15.1–16.2
16.3–17.5
17.6–18.6
18.7–19.9
20.0–21.3
21.4–22.8
22.9–25.1
25.2–27.6
27.7–30.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
9.12–9.6
9.7–10.4
10.5–11.4
11.5–12.1
12.2–12.9
13.0–13.7
13.8–14.8
14.9–16.4
16.5–18.2
18.3–19.5
19.6–20.9
21.0–22.8
22.9–24.7
24.8–27.6
27.7–30.5
30.6–33.9
34.0–37.3
37.4–40.2
40.3–41.9
42.0–45.9
46.0–50.9
51.0–52.9
53.0–57.7
57.8–60.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
23.2–25.1
25.2–27.3
27.4–30.4
30.5–33.3
33.4–36.5
36.6–39.3
39.4–43.5
43.6–46.6
46.7–51.1
51.2–56.3
56.4–61.1
61.2–64.9
65.0–71.9
72.0–80.7
80.8–92.7
92.8–100.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
43.0–46.5
46.6–50.9
51.0–55.9
56.0–59.1
59.2–68.7
—
68.8–80.7
80.8–92.7
92.8–103.9
104.0–113.5
113.6–127.9
128.0–143.9
144.0–163.9
164.0–180.0
K21
K22
K23
K24
K26
K27
K28
K29
K31
K32
K33
K34
K36
K37
K39
K41
K42
K43
K49
K50
K52
K53
K54
K55
K56
K57
K58
K60
K61
K62
K63
K64
K67
K68
K69
K70
K72
K73
K74
K75
K76
K77
K78
K85
K86
K87
K89
K92
K94
K96
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA & General
Purpose Control
Discount Schedule NEMA
Full Load Amps
List Price $
CONTROL
PRODUCTS
Size 1P
16
Size 00, 0, 1
Selection
Table 316 for Class 48
16-153
Overload Relay Heater Tables
Full Load Motor Amps, 3-Phase, Trip Class 10 – Tables 332, 335
Table 332 for Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87 (3-Phase)
Full Load Amps
NEMA & General
Purpose Control
CONTROL
PRODUCTS
16
Size 00, 0, 1
1.52–1.65
1.66–1.79
1.80–1.94
1.95–2.15
2.16–2.37
2.38–2.56
2.57–2.87
2.88–3.13
3.14–3.37
3.38–3.72
3.73–4.00
4.01–4.35
4.36–4.99
5.00–5.38
5.39–5.79
5.80–6.43
6.44–6.83
6.84–7.83
7.84–8.23
8.24–9.59
9.60–9.90
10.0–10.7
10.8–11.6
11.7–12.3
12.4–13.4
13.5–14.2
14.3–15.1
15.2–17.5
17.6–18.7
18.8–20.0
20.1–21.5
21.6–23.9
24.0–25.8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16-154
3
Size 1 ⁄4
1.52–1.65
1.66–1.79
1.80–1.94
1.95–2.15
2.16–2.37
2.38–2.56
2.57–2.87
2.88–3.13
3.14–3.37
3.38–3.72
3.73–4.00
4.01–4.35
4.36–4.99
5.00–5.38
5.39–5.79
5.80–6.43
6.44–6.83
6.84–7.83
7.84–8.23
8.24–9.59
9.60–9.90
10.0–10.7
10.8–11.6
11.7–12.3
12.4–13.4
13.5–14.2
14.3–15.1
15.2–17.5
17.6–18.7
18.8–20.0
20.1–21.5
21.6–23.9
24.0–25.8
25.9–29.5
—
29.6–32.7
32.8–36.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Size 2, 2 ⁄2
1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
12.1–12.7
12.8–13.5
13.6–14.6
14.7–15.9
16.0–16.9
17.0–18.2
18.3–19.5
19.6–20.9
21.0–23.1
23.2–25.4
25.5–27.9
—
28.0–30.5
30.6–33.5
33.6–37.2
37.3–40.7
40.8–43.0
43.1–47.9
48.0–52.7
52.8–58.3
58.4–60.0
—
—
—
—
—
—
—
—
—
—
Size 3, 3 ⁄2
1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
36.8–40.0
40.1–42.4
42.5–46.3
46.4–49.6
49.7–52.3
52.4–57.5
57.6–63.9
64.0–67.9
68.0–74.3
74.4–77.9
78.0–83.1
83.2–91.4
91.5–99.9
100.0–108.0
—
—
—
—
Size 4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
49.7–52.3
52.4–57.5
57.6–63.0
63.1–68.1
68.2–74.3
74.4–79.9
80.0–87.4
87.5–90.0
90.1–100.0
100.1–108.0
108.1–119.0
119.1–130.0
—
—
Heater
Catalog No List Price $
K21
K22
K23
K24
K26
K27
K28
K29
K31
K32
K33
K34
K36
K37
K39
K41
K42
K43
K49
K50
K52
K53
K54
K55
K56
K57
K58
K60
K61
K62
K63
K64
K67
K68
K69
K70
K72
K73
K74
K75
K76
K77
K78
K83
K85
K86
K87
K88
K89
K90
K92
K94
K96
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Selection
Table 335 for Class 48
Full Load Amps
48DC
48GC
48HA
48JA
1.56–1.69
1.70–1.84
1.85–1.98
1.99–2.19
2.20–2.43
2.44–2.63
2.64–2.95
2.96–3.21
3.22–3.45
3.46–3.81
3.82–4.10
4.11–4.46
4.47–5.10
5.11–5.49
5.50–6.21
6.22–6.76
6.77–7.62
7.63–8.07
8.08–9.19
9.20–10.0
10.1–11.0
11.1–12.0
12.1–12.7
12.8–13.5
13.6–14.5
14.6–15.7
15.8–16.7
16.8–17.9
18.0–19.2
19.3–20.5
20.6–22.5
22.6–24.8
24.9–27.6
27.7–30.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
18.0–19.2
19.3–20.5
20.6–22.5
22.6–24.8
24.9–27.6
—
27.7–30.1
30.2–33.1
33.2–36.7
36.8–40.1
40.2–45.5
45.6–47.9
48.0–52.7
52.8–55.1
55.2–60.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
23.2–25.1
25.2–27.3
27.4–30.4
30.5–33.3
33.4–36.5
36.6–39.3
39.4–43.5
43.6–46.6
46.7–51.1
51.2–56.3
56.4–61.1
61.2–64.9
65.0–71.9
72.0–80.7
80.8–92.7
92.8–100.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
43.0–46.5
46.6–50.9
51.0–55.9
56.0–59.1
59.2–68.7
—
68.8–80.7
80.8–92.7
92.8–103.9
104.0–113.5
113.6–127.9
128.0–143.9
144.0–163.9
164.0–180.0
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Heater
Catalog No
K21
K22
K23
K24
K26
K27
K28
K29
K31
K32
K33
K34
K36
K37
K39
K41
K42
K43
K49
K50
K52
K53
K54
K55
K56
K57
K58
K60
K61
K62
K63
K64
K67
K68
K69
K70
K72
K73
K74
K75
K76
K77
K78
K85
K86
K87
K89
K92
K94
K96
List Price $
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
Discount Schedule NEMA
Replacement Parts
Starters and Contactors – AC Coils
Selection
Ordering Information
䊳
4th character of starter or contactor catalog number indicates model.
AC Coils — For Class 14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 40, 43, 83, 84, 87, 88
Volts
Size
Catalog Number
24
110
110/190–220
—
190–220
240
190–220/380–440
380–440
550
24
110
110/190–220
—
190–220
240
190–220/380–440
380–440
550
24
110
110/190–220
—
190–220
240
190–220/380–440
380–440
550
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
75D73070J
75D73070F
75D73070A
75D73070D
75D73070G
75D73070L
75D73070C
75D73070H
75D73070E
75D73251J
75D73251F
75D73251A
75D73251D
75D73251G
75D73251L
75D73251C
75D73251H
75D73251E
75D70131J
75D70131F
75D70131A
75D70131D
75D70131G
75D70131L
75D70131C
75D70131H
75D70131E
3RT1966-5AB31
3RT1966-5AF31
3RT1966-5AM31
3RT1966-5AP31
3RT1966-5AU31
3RT1966-5AV31
3RT1966-5AR31
3RT1966-5AT31
3RT1965-5AB31
3RT1965-5AF31
3RT1965-5AM31
3RT1965-5AP31
3RT1965-5AU31
3RT1965-5AV31
3RT1965-5AR31
3RT1965-5AT31
3RT1975-5AB31
3RT1975-5AF31
3RT1975-5AM31
3RT1975-5AP31
3RT1975-5AU31
3RT1975-5AV31
3RT1975-5AR31
3RT1975-5AT31
List Price $
67.00
67.00
67.00
67.00
67.00
67.00
67.00
67.00
67.00
144.00
144.00
144.00
144.00
144.00
144.00
144.00
144.00
144.00
173.00
173.00
173.00
173.00
173.00
173.00
173.00
173.00
173.00
176.00
176.00
176.00
176.00
176.00
176.00
176.00
176.00
165.00
165.00
165.00
165.00
165.00
165.00
165.00
165.00
213.00
213.00
213.00
213.00
213.00
213.00
213.00
213.00
00–21⁄2
P
S (ESP100)
3 , 31⁄2
P
S (ESP100)
4
G
T (ESP100)
4, 5
V (Vacuum)
5
P
6
P
V (Vacuum)
7
H
100-250
150-500
100-250
150-500
75ZAF750-70
75ZAF750-71
587.00
587.00
8
H
100-250
100-250
75ZAF1650-70
1029.00
Set
of 2 coils. Recommend to change printed circuit
board when changing coils. 49ZP1650 for List Price see
page 16-156.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-155
NEMA & General
Purpose Control
50Hz
24
120
110–120/220–240
208
220–240
277
220–240/440–480
440–480
575–600
24
120
110–120/220–240
208
220–240
277
220–240/440–480
440–480
575–600
24
120
120/220–240
208
220–240
277
220–240/440–480
440–480
575–600
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
23-26
110-127
200-220
220-240
240-277
380-420
440-480
575-600
CONTROL
PRODUCTS
Code: SIRIUS 3R, Contactors, OL's, MSP's.
60Hz
16
Discount
Model
Replacement Parts
Starters and Contactors – DC Coils, Late Break Aux Contacts, Rectifiers, Contact Kits Selection
Ordering Information
䊳
䊳
4th character of starter or contactor catalog number indicates model.
DC Coils for Size 00-4 require Late Break Interlock.
DC Coils — For Class 14, 17, 18, 22, 25, 26, 30, 32, 40, 43
Size
Model
00–21⁄2
P
S (ESP 100)
3, 31⁄2
P
S (ESP 100)
4
G
T (ESP 100)
4, 5
V (Vacuum)
Volts DC
Catalog Number
12
24
32
48
125
250
12
24
32
48
125
250
48
125
250
23-26
42-48
110-127
240-277
75D73070R
75D73070S
75D73070T
75D73070U
75D73070V
75D73070W
75D73251R
75D73251S
75D73251T
75D73251U
75D73251V
75D73251W
75D70131U
75D70131V
75D70131W
3RT1966-5AB31
3RT1966-5AD31
3RT1966-5AF31
3RT1966-5AU31
List Price $
99.00
99.00
99.00
99.00
99.00
99.00
213.00
213.00
213.00
213.00
213.00
213.00
338.00
338.00
338.00
176.00
176.00
176.00
176.00
Note: For sizes 7 & 8 contactors the AC coils are used for DC see page 16-155.
Board for Size 8 Contactor
CONTROL
PRODUCTS
16
Late Break Auxiliary Contacts
Control Size
Model
Catalog Number List Price $
00–4
P, G, S, T
49AB01LB
51.00
Model
Catalog Number List Price
8
H
49ZP1650
Contact Kits – Single Pole Stationary and Movable Contacts, Contact Spring
Description
Size
Number of Poles in Kit
3
NEMA & General
Purpose Control
Control Size
Class 14, 17, 18, 22, 25,
26, 30, 32, 36, 37, 40, 43,
83, 84, 87, 88
14, 40
Discount
Discount
16-156
Internal Aux Contact (00-1- ⁄4)
00
0
1
13⁄4–1P
2
21⁄2
3
31⁄2
4
4 (Vacuum)
5
5 (Vacuum)
6
6 (Vacuum)
7
8
Code: IEC.
Code: NEMA Control.
1
1
1
1
1
3 (Bottles)
3
3 (Bottles)
3
3 (Bottles)
3
3
Model
(4th position in part number)
P, S
P, S
P, S
P, S
P, S
P, S
P, S
P, S
P, S
G, T
V, C
P
V, C
P
V, C
H
H
On
3-phase controls, all 3-poles should be replaced 3 kits required.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Catalog Number
75AF14
75BF14
75CF14
75DF14
75EF14
75FP14
75GP14
75HF14
75IF14
75JG14
3RT1964-6V
3RT1966-6A
3RT1966-6V
3RT1976-6A
3RT1976-6V
49ZL750
49ZL1650
List Price $
20.00
22.00
34.00
45.00
67.00
81.00
120.00
144.00
223.00
290.00
1161.00
1054.00
1704.00
1395.00
2130.00
4428.00
5468.00
1811.00
Replacement Parts
Starters and Contactors – Coil VA Ratings and Overload Relays
Selection
Coil VA Ratings
Device Type
NEMA Starter
Lighting Contactor
Mechanically Held (CLM)
Volts
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
24
120
208
240
277
480
600
24
120
208
240
277
480
600
24
120
208
240
277
480
600
24
120
208
240
277
480
600
24
120
208
240
277
480
600
All Voltages
Electrically
Held
Number of Poles
Total Inrush VA
Total Sealed VA
—
—
—
—
—
—
—
—
2-12
2-5
2-3
4-5
2-3
4-5
3
3
3
3
3
3
3
3
12
12
12
12
12
12
12
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
218
310
510
590
830
850
1900
630
6
40
40
40
200
130
550
49.6
51.3
75.79
86.78
79.1
83.7
84.1
73.31
75.1
73.97
89.15
78.55
84
81.9
49.67
51.94
76.57
64.44
77.85
83.6
82.1
74.94
75.77
78.73
89.92
84.89
87.6
85.4
182.28
191.42
187.78
215.32
175.92
198.2
171.1
300
590
830
25
26
51
6.7
9.2
12
48
7.4
625
410
410
600
900
1300
1600
6.9
6.57
11.94
14.25
11.97
12.9
13.2
12.66
13.1
13.25
14.85
12.77
12.9
13.4
7.08
6.48
11.78
8.99
14.2
13.1
13.4
13.16
13.59
12.05
14.42
12.93
12.7
13.8
32.85
32.26
31.15
35.63
30.62
34.8
29.6
5.8
6.7
9.2
NEMA & General
Purpose Control
—
—
—
—
—
—
—
—
20
30
60
60
100 - 200
100 - 200
300 - 400
20
20
20
20
20
20
20
20
20
20
20
20
20
20
30
30
30
30
30
30
30
60
60
60
60
60
60
60
100
100
100
100
100
100
100
200
300
400
CONTROL
PRODUCTS
Amps
00 thru 2 1/2
3 thru 3 1/2
4
5
6
7
8
4,5,6 (Vacuum)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16
Lighting Contactor
Electrically Held Held (LE)
Contactor Size
Overload Relays – For Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87
Size
Half
Size
Ambient Comp Bimetal
Model
00–1
—
P
1P
—
—
13⁄4
P
P
2
—
P
—
21⁄2
P
3
—
4
—
31⁄2
—
P
P
G
Number Poles
Catalog Number (1) NC
List Price $
1
3
1
3
1
3
1
3
3
3
3
48DC18AA3
48DC38AA3
48EC18AA3
48EC38AA3
48GC18AA3
48GC38AA3
48GC18AA3
48GC38AA3
48HC38AA3
48HC38AA3
48JC38AA3
116.00
120.00
151.00
155.00
165.00
169.00
165.00
169.00
286.00
286.00
430.00
Catalog Number (1) NO/NC
List Price $
48DC39AA3
155.00
48EC39AA3
191.00
48GC39AA3
205.00
48GC39AA3
205.00
For Starter and Contactor replacement parts not found in this section, please refer to Field Modification kits found starting on page 16-79.
For
replacement Solid State overload relays, please see the Overload Relay section
found starting on page 16-47.
Includes
overload mounting plate to be coupled to contactor mounting plate.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-157
Replacement Parts
Lighting and Heating Contactors, Type LE, CLM, CMF, CMN
Selection
AC Coils – 20-400 Amps
Type
LE
3 RT 1 9 5 5 - 5 A F 3 1
Contactor
Size
Catalog Number
24VAC
120VAC
208VAC
240VAC
277VAC
480VAC
600VAC
List
Price $
20, 30, 60 Amp 75D70646J
75D70646F
75D70646D
75D70646G
75D70646L
75D70646H
75D70646E
100 Amp
75D54772J
75D54772F
75D54772D
75D54772G
75D54772L
75D54772H
75D54772E
56.00
200 Amp
3RT1955-5AB31 3RT1955-5AF31
3RT1955-5AM31 3RT1955-5AP31
3RT1955-5AU31
3RT1955-5AR31 3RT1955-5AT31
133.00
300 Amp
3RT1965-5AB31 3RT1965-5AF31
3RT1965-5AM31 3RT1965-5AP31
3RT1965-5AU31
3RT1965-5AR31 3RT1965-5AT31
165.00
400 Amp
3RT1975-5AB31 3RT1975-5AF31
3RT1975-5AM31 3RT1975-5AP31
3RT1975-5AU31
3RT1975-5AR31 3RT1975-5AT31
213.00
93.00
Main Contacts (Includes 3 Moving and 6 Fixed Contacts)
Type
LE
3 RT 1 9 6 5 - 6 A
Contactor Size
Catalog Number
20–100 Amp
Not Replaceable
List Price $
200 Amp
3RT1956-6A
300 Amp
3RT1965-6A
847.00
400 Amp
3RT1975-6A
1193.00
—
554.00
Lighting Contact Assembly - 20 Amp (Power Poles)
Type
Catalog
Number
Contactor Size
(Verify catalog number on
side of contact assembly)
49LN02A, 2 NC Contacts Non-Stackable
LE
20 Amp
List Price $
101.00
49LN20A, 2 NO Contacts Non-Stackable
101.00
49LS20A, 2 NO Contacts Stackable
101.00
49LS10A, 1 NO Contact Stackable
101.00
CONTROL
PRODUCTS
16
AC Coils 20 Amps
CLM4097341
Type
Contactor
Size
Number
of Poles
120V, 60Hz
110V, 50Hz
List
Price $
240V, 60Hz
208V, 50Hz
List
Price $
277V
50/60Hz
CLM
20 Amp
2–12
CLM4097341
103.00
CLM4097342
103.00
CLM4097343
List
Price $
480V, 60Hz
440V, 50Hz
List
Price $
103.00
CLM4097344
103.00
AC Coils 30–400 Amps
NEMA & General
Purpose Control
CLMC4C120
CLMGU3C120
Type
Contactor
Size
CLM†C
30 Amp
CLM†D
60 Amp
CLM†E
100, 200
Amp
CLM†G
Latching Coil
Unlatch Coil
CLM†H
Latching Coil
Unlatch Coil
Catalog Number
Number
of Poles
24V AC
120V AC
208V AC
220/240V AC
277V AC
480V AC
600V AC
List
Price $
2–3-Pole
4-Pole
5-Pole
2–3-Pole
4-Pole
5-Pole
2–3-Pole
4-Pole
5-Pole
CLMC4C024
CLMC4C024
CLMC5C024
CLMD3C024
CLMD5C024
CLMD5C024
CLME3C024
CLME5C024
CLME5C024
CLMC4C120
CLMC4C120
CLMC5C120
CLMD3C120
CLMD5C120
CLMD5C120
CLME3C120
CLME5C120
CLME5C120
CLMC4C208
CLMC4C208
CLMC5C208
CLMD3C208
CLMD5C208
CLMD5C208
CLME3C208
CLME5C208
CLME5C208
CLMC4C240
CLMC4C240
CLMC5C240
CLMD3C240
CLMD5C240
CLMD5C240
CLME3C240
CLME5C240
CLME5C240
CLMC4C277
CLMC4C277
CLMC5C277
CLMD3C277
CLMD5C277
CLMD5C277
CLME3C277
CLME5C277
CLME5C277
CLMC4C480
CLMC4C480
CLMC5C480
CLMD3C480
CLMD5C480
CLMD5C480
CLME3C480
CLME5C480
CLME5C480
CLMC4C600
CLMC4C600
CLMC5C600
CLMD3C600
CLMD5C600
CLMD5C600
CLME3C600
CLME5C600
CLME5C600
119.00
119.00
119.00
141.00
141.00
141.00
237.00
237.00
237.00
300 Amp
2–3-Pole
2–3-Pole
—
—
CLMGL3C120 CLMGL3C208 CLMGL3C240 CLMGL3C277 CLMGL3C480 CLMGL3C600 511.00
CLMGU3C120 CLMGU3C208 CLMGU3C240 CLMGU3C277 CLMGU3C480 CLMGU3C600 511.00.
400 Amp
2–3-Pole
2–3-Pole
—
—
CLMHL3C120 CLMHL3C208 CLMHL3C240 CLMHL3C277 CLMHL3C480 CLMHL3C600 583.00
CLMHU3C120 CLMHU3C208 CLMHU3C240 CLMHU3C277 CLMHU3C480 CLMHU3C600 583.00
Control Module Rectifier
Type
Device
Contactor Size
Number of Poles
Catalog Number
List Price $
CLM
CLM†C to
CLM†F
30–200 Amps
All
CLMKCMR
167.00
Discount code: IEC.
Coil kits for 20 amp
CLM contactors include the coil
clearing auxiliary contact.
16-158
For
30–200 amp CLM contactors, in the event that
either the coil or the control module fails, it is
recommended that both be replaced.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Replacement Parts
Lighting Contactors, CLM, CMB, CMF, CMN & Combination Replacement Handles
Selection
Ordering Information
䊳
䊳
For CLM: 5th character of contactor catalog number indicates Frame Size.
For CMB, CMF, CMN: 4th character of contactor catalog number indicates Frame Size.
Main Contacts 20 Amp Lighting Contactors
Type
CLM
Contactor
Size
Number of
Poles
Location
Catalog
Number
List
Price $
20 Amp
2
3
4
6
Top or Bottom
Top
Top or Bottom
Top or Bottom
CLM4097331
CLM4097332
CLM4097333
CLM4097334
258.00
290.00
355.00
419.00
CLM4097334
Main Contacts 30–400 Amp Lighting Contactors
Type
CLM
Number of
Poles
Catalog
Number
List
Price $
C
30 Amp
2
3
4
5
CLMCCK02
CLMCCK03
CLMCCK04
CLMCCK05
133.00
192.00
223.00
268.00
D
60 Amp
2
3
4
5
CLMDCK02
CLMDCK03
CLMDCK04
CLMDCK05
155.00
252.00
533.00
564.00
E
100 Amp
2
3
4
5
CLMECK02
CLMECK03
CLMECK04
CLMECK05
300.00
449.00
600.00
752.00
F
200 Amp
2
3
4
5
CLMFCK02
CLMFCK03
CLMFCK04
CLMFCK05
578.00
863.00
1151.00
1438.00
G
300 Amp
2
3
CLMGCK02
CLMGCK03
1428.00
2118.00
H
400 Amp
2
3
CLMHCK02
CLMHCK03
2766.00
4152.00
CONTROL
PRODUCTS
Contactor
Size
16
Frame
Size
Auxiliary Contact Blocks 20 Amp Lighting Contactors
Type
Contactor
Size
CLM
20 Amp
Contacts
Catalog
Number
List
Price $
1 Form C NO, NC Contact
2 Form C NO, NC Contacts
CLM4097291
CLM4097292
97.00
193.00
Auxiliary Contact Blocks 30–400 Amp Lighting Contactors
Frame
Size
Contactor
Size
C to F
30–200 Amps
G to H
300–400 Amps
CLM
CLMFCAK11
Contact
Configuration
Catalog
Number
List
Price $
1 NO and 1 NC
2 NC
2 NO
1 Coil Clearing
NO and NC
CLMFCAK11
CLMFCAK02
CLMFCAK20
CLMFCCK11
71.00
71.00
71.00
71.00
1 NO and 1 NC
2 NC
2 NO
1 Coil Clearing
NO and NC
CLMHCAK11
CLMHCAK02
CLMHCAK20
CLMHCCK11
71.00
71.00
71.00
71.00
NEMA & General
Purpose Control
Type
Combination Starters Class 17, 18, 25, 26 & 32
Replacement Handle Assemblies
NEMA 1, 4, 12 Enclosure Class 17, 25, 32
Disc
Standard
List
Extra
Size
Width
Price $
Wide
30-100A
200A
Maximum
Maximum
75D68257103
75D68257105
269.00
269.00
75D68257103
—
List
Price $
269.00
—
NEMA 1, 4, 12 Enclosure Class 18, 26, 32
Circuit
Standard
List
Extra
Breaker Width
Price $
Wide
3-100A
125A
150A
75D68257080
75D68257096
75D68257089
269.00
269.00
269.00
75D68257080
—
—
List
Price $
269.00
—
—
1 block per contactor.
2 blocks per contactor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-159
Definite Purpose Control
Definite Purpose Contactors
General
Class 45
45CG10AJA
45CG20AF
Benefits
▪ Power Termination Options
▪ Compact Size
▪ One Pole Version Includes Shunt Bar
▪ Interchangeable Mounting Durable Metal Back Plate
▪ Standard Class B Coil Insulation
45EG10AJA
▪
▪
▪
▪
▪
45EG20AF
Quiet Operation
Weld-resistant Silver Cadmium Oxide Contacts
Power Terminal Operations
Reinforced Thermalset Polyester Housing
Contact Covers and Taped Coils Come Standard
CONTROL
PRODUCTS
16
Class 42
Definite
Purpose Control
42AF35AF
42DF35AF
Benefits
▪ Compact Size
▪ Interchangeable Mounting Durable Metal Back Plate
▪ Power Terminations Options
▪ Reinforced Thermalset Polyester Housing
▪ Quiet Operation
Common Definite Purpose Applications
▪ Air Conditioning
▪ Heating
▪ Ventilating
▪ Refrigeration
▪ Food and Beverage Industry
▪ Conveyors
42FE35AF106
▪
▪
▪
▪
▪
Weld-resistant Silver Cadmium Oxide Contacts
Optional Din Rail Mounting
Snap-on Electrical/Mechanical Interlocks
Visual Contact Position Indication
Low VA Coils Standard for 25A–40A
▪
▪
▪
▪
▪
Elevators
Lighting
Pool and Spa
Welding
Pump and Compressor
For further products and dimensions see supplement catalog DPBR-18010-0905. New supplement catalog to be ready Summer 2007.
16-160
42HF35AF
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Definite Purpose Control
Definite Purpose Contactors
Selection
Coil Table
Ordering Information
䊳
䊳
Use complete catalog number. Replace the (*) with letter from the coil table.
For additional information see Definite Purpose Catalog DPBR-18010-0905.
60Hz
24
110–120
200–208
208–240
277
440–480
550–600
50Hz Voltage
24
110
—
190–220
240
380–440
550
Letter
J
F
D
G
L
H
E
Class 45
FLA
120V
Hp
240V
LRA
20
25
30
35
40
—
—
—
—
—
120
150
180
200
240
20
25
30
35
40
—
—
—
—
—
—
—
—
—
—
Hp
277V
LRA
—
—
—
—
—
110
150
180
180
240
—
—
—
—
—
120
150
180
200
240
Hp
480V
LRA
—
—
—
—
—
100
100
150
150
200
—
—
—
—
—
100
125
135
135
200
Hp
600V
LRA
—
—
—
—
—
80
80
120
120
160
—
—
—
—
—
80
100
110
110
160
Hp
Non
Inductive
Amps
Poles
Catalog No
List Price $
—
—
—
—
—
25
35
40
50
55
1
1
1
1
1
45CG10A*A
45DG10A*A
45EG10A*A
45FG10A*A
45GG10A*A
44.50 40.
48.50
55.00 49.
61.00 54.
66.00
—
—
—
—
—
30
35
40
50
55
2
2
2
2
2
45CG20A*
45DG20A*
45EG20A*
45FG20A*
45GG20A*
66.00
87.00
96.00
102.00
107.00
59.
78.
85.
91.
96.
Class 42 25–150 FLA 60Hz 600V AC Max
Hp
277V
LRA
Hp
480V
LRA
Hp
600V
LRA
Hp
Non
Inductive
Amps
Poles
Catalog No
3
5
5
—
—
—
—
—
—
125
125
125
—
7.5
7.5
100
100
100
—
7.5
7.5
35
35
35
2
3
4
42AF15A*
42AF35A*
42AF25A*
101.00
117.00 104.
158.00 141.
180
180
180
5
7.5
7.5
—
—
—
—
—
—
150
150
150
—
10
10
120
120
120
—
10
10
40
40
40
2
3
4
42BF15A*
42BF35A*
42BF25A*
122.00 109.
130.00 116.
172.00 1154.
3
—
—
240
240
240
7.5
10
10
—
—
—
—
—
—
200
200
200
—
15
15
160
160
160
—
15
15
50
50
50
2
3
4
42CF15A*
42CF35A*
42CF25A*
137.00 122.
152.00 136.
196.00 176.
50
50
3
—
300
300
10
15
—
—
—
—
250
250
—
30
200
200
—
30
63
63
2
3
42DF15A*
42DF35A*
282.00 253.
299.00 268.
60
60
5
—
360
360
10
20
—
—
—
—
300
300
—
40
240
240
—
40
75
75
2
3
42EF15A*
42EF35A*
320.00 286.
333.00 298.
75
75
—
—
450
450
25
25
—
—
—
—
375
375
—
40
300
300
—
40
93
93
2
3
42FE15A*106
42FE35A*106
383.00 343.
428.00 383.
90
90
—
—
540
540
—
30
—
—
—
—
450
450
—
60
360
360
—
60
120
120
2
3
42GE15A*106
42GE35A*106
496.00 443.
536.00 479.
120
120
—
—
720
720
—
—
—
—
—
—
600
600
—
—
480
480
—
—
150
150
2
3
42HF15A*
42HF35A*
607.00 543.
660.00 591.
150
150
—
—
900
900
—
—
—
—
—
—
750
750
—
—
600
600
—
—
160
160
2
3
42IF15A*
42IF35A*
1172.00 1048.
1293.00 1156.
25
25
25
2
—
—
150
150
150
30
30
30
2
—
—
40
40
40
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-161
Definite
Purpose Control
Discount Schedule NEMA
List Price $
CONTROL
PRODUCTS
240V
LRA
16
FLA
120V
Hp
SIRIUS Soft Starters
Introduction
Overview
Products at a glance
3RW30/3RW31
3RW40
3RW44
Class 73/74 Enclosed
Order No.
Page
3RW30, 3RW31
16-164
3RW40
16-165
3RW44
16-166
Class 73/74
16-168/16-169
SIRIUS soft starters
for standard applications
SIRIUS 3RW30 soft starters
• SIRIUS 3RW30/31 soft starters for soft starting and smooth
ramp-down of single-phase or three-phase asynchronous motors1)
• Rating range of up to 60 Hp at 460 V (50 °C ambient)
• Application areas:
- Fans
- Pumps
- Building/construction machines
- Presses
- Escalators
- Transport systems
SIRIUS 3RW40 soft starters
-
Air conditioning systems
Ventilators
Assembly lines
Compressors and coolers
Operating mechanisms
• SIRIUS 3RW40 soft starters with integrated functions
- solid-state motor overload and intrinsic device protection and
- adjustable current limiting
for the soft starting and stopping of three-phase asynchronous motors
• Rating range from 75 to 300 Hp at 460 V (50 °C ambient)
CONTROL
PRODUCTS
16
• Application areas:
- Fans
- Pumps
- Building/construction machines
- Presses
- Escalators
- Transport systems
-
Air conditioning systems
Ventilators
Assembly lines
Compressors and coolers
Operating mechanisms
for High Feature applications
SIRIUS 3RW44 soft starters
• In addition to soft starting and soft ramp-down, the solid-state
SIRIUS 3RW44 soft starters provide numerous functions for
higher-level requirements
• Rating range from - up to 600 Hp at 460 V in inline circuit
• Application areas:
- Pumps
- Ventilators
- Compressors
- Cooling systems
- Industrial refrigerating systems
-
Water transport
Conveying systems
Hydraulics
Machine tools
Mills
For enclosed applications
Enclosures in NEMA 1, 3, 4, & 12 types • Complete starter includes 3RW40 or 3RW44 and CPT
UL/CSA listed
• Combination options include circuit breaker or fusible DBC
Soft Starter
Control
• Application areas:
- Compressors
- Pumps
- Stamping presses
- Cooling towers
- Molding and extruding
- Chippers and debarkers
-
Lumber processing
Pulp & paper processing
Conveyors
Textiles
HVAC
1) 3RW30 single phase devices do not have ramp down functionality.
16-162
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
SIRIUS Soft Starters
General Data
Overview
The advantages of the SIRIUS soft starters at a glance:
• Soft starting and soft stop1)
• Stepless starting
• Reduction of current peaks
• Avoidance of mains voltage fluctuations during starting
• Reduced load on the power supply network
Rated current at 50 °C
Rated operating voltage
Motor rating at 460 V
• Inline circuit
• Inside-delta circuit
Temperature range
SIRIUS 3RW40
SIRIUS 3RW44
High Feature applications
A
V
2.6 ... 85
200 ... 575
117 ... 385
200 ... 600
26 ... 1076
200 ... 690
Hp
Hp
°C
1.1 ... 60
–
-25 ... +60
75 ... 300
–
-25 ... +60
15 ... 950
22 ... 600
0 ... +60
40 ... 100
0 ... 20
–
–
–
–
20 ... 100
1 ... 360
1)
%
s
%
%
s
40 ... 100
0 ... 20
–
–
–
–
20 ... 100
20 ... 200
1 ... 360
2)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
2 controlled phases
6)
3) 6)
3) 6)
with PROFIBUS DP (option)
(option )
4)
3
3 controlled phases
5)
–
–
6)
Win-SOFTSTARTER Technical Assistance 1-800-241-4453
Function is available
– Function not available
5) For 3RW30 03 up to 230 V.
6) Calculate soft starter and motor with size allowance where required.
1)
2)
3)
4)
You can find further information on the Internet at:
http://sielect.sea.siemens.com
Soft stop not available for 3RW31.
Not available for 3RW30 03.
Not possible in inside-delta circuit.
Trace function with Softstarter ES software.
Soft Starter
Control
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1 (2 with 3RW31)
–
2 controlled phases
(only 3RW30 03)
CONTROL
PRODUCTS
Integral bypass contact system
Intrinsic device protection
Motor overload protection
Thermistor motor protection
Adjustable current limiting
Inside-delta circuit
Breakaway pulse
Creep speed in both directions
Pump ramp-down
DC braking
Combined braking
Motor heating
Communication
External display and operator module
LCD Operating measured value display
Error logbook
Event list
Slave pointer function
Trace function
Programmable control inputs and outputs
Number of parameter sets
Parameterization software (Softstarter ES)
Power semiconductors (thyristors)
Spring-loaded terminals
Screw terminals
UL/CSA
CE marking
Soft starting under heavy starting conditions
Configuring support
SIRIUS 3RW30/31
Standard applications
16
Soft starting/ramp-down
Voltage ramp
Starting/stopping voltage
Starting and ramp-down time
Torque control
Starting/stopping torque
Torque limit
Ramp time
• Reduction of the mechanical load in the operating mechanism
• Considerable space savings and reduced wiring compared
with mechanical reduced voltage starters
• Maintenance-free switching
• Very easy handling
• Fits perfectly in the SIRIUS modular system
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-163
SIRIUS Soft Starters
Standard Applications—SIRIUS 3RW3 Soft Starters
Selection
Selection and ordering data
3RW30 03-2CB54
3RW30 25-1AB14
3RW30 35-1AA12
3RW30 35-1AB14
Rated operating
voltage Ue
At ambient temperature 50 °C
Rated operating current Ie
Rated output of three-phase induction
motors for rated operating voltage Ue
Size
115 V
200 V
230 V
460 V
575 V
V
A
hp
hp
hp
hp
hp
Order No.
List
Price $
Weight per
PU approx.
kg
Soft starters for easy starting conditions and high operating frequency
200 ... 400
2.6
-
0.5
0.5
-
-
3RW30 03-@CB54
308.00
0.200
Order No. extension for rated connection method1)1
with screw-type terminals
with spring-loaded terminals
22.5 mm
22.5 mm
1
2
Soft starters for three-phase asynchronous motors
CONTROL
PRODUCTS
16
200 ... 460
460 ... 575
4.8
7.8
-
1
2
1
2
3
5
-
S00
S00
3RW30 14-1CB@4
3RW30 16-1CB@4
406.00
484.00
0.302
0.305
11
14
21
-
3
3
5
3
3
5
7.5
10
15
-
S0
S0
S0
3RW30 24-1AB@4
3RW30 25-1AB@4
3RW30 26-1AB@4
496.00
567.00
587.00
0.490
0.481
0.489
27
32
38
-
7.5
7.5
10
7.5
10
10
20
20
25
-
S2
S2
S2
3RW30 34-1AB@4
3RW30 35-1AB@4
3RW30 36-1AB@4
763.00
942.00
1177.00
0.794
0.779
0.791
54
64
85
-
15
20
25
20
20
30
40
40
60
-
S3
S3
S3
3RW30 44-1AB@4
3RW30 45-1AB@4
3RW30 46-1AB@4
1301.00
1639.00
1978.00
1.660
1.800
1.810
11
14
21
-
-
-
7.5
10
15
10
10
15
S0
S0
S0
3RW30 24-1AB@5
3RW30 25-1AB@5
3RW30 26-1AB@5
668.00
723.00
780.00
0.490
0.489
0.489
27
32
38
-
-
-
20
20
25
25
30
30
S2
S2
S2
3RW30 34-1AB@5
3RW30 35-1AB@5
3RW30 36-1AB@5
916.00
1132.00
1412.00
0.791
0.793
0.792
54
64
85
-
-
-
40
40
60
50
60
75
S3
S3
S3
3RW30 44-1AB@5
3RW30 45-1AB@5
3RW30 46-1AB@5
1561.00
1967.00
2375.00
1.660
1.810
1.800
2)
Order No. extension for rated control supply voltage Us
AC/DC 24 V
AC/DC 110 ... 230 V
0
1
Soft starters with two-ramp control for three-phase induction motors with two speeds
(double pole-reversing)
200 ... 460
11
14
21
-
3
3
5
3
3
5
7.5
10
15
-
S0
S0
S0
3RW31 24-1CB14
3RW31 25-1CB14
3RW31 26-1CB14
613.00
657.00
722.00
0.468
0.475
0.464
460 ... 575
11
14
21
-
-
-
7.5
10
15
10
10
15
S0
S0
S0
3RW31 24-1CB15
3RW31 25-1CB15
3RW31 26-1CB15
735.00
795.00
858.00
0.467
0.476
0.475
3
5
10
3
5
10
-
-
S0
S2
S3
3RW30 26-1AA12
3RW30 35-1AA12
3RW30 45-1AA12
313.00
501.00
864.00
0.439
0.729
1.390
Soft starters for single-phase motors
Soft Starter
Control
115 ... 240
21
32
64
1.5
2
5
1) Units have removable terminals.
2) 3RW30 46-1AB05 soft starters (AC/DC 24 V version):
Delivery time on request.
Selection of the soft starter depends on the motor’s rated
current.
16-164
The SIRIUS 3RW3 solid-state soft starters are designed for easy
starting conditions. JLoad < 10 x JMotor. In the event of deviating
conditions or increased switching frequency, it may be necessary to choose a larger unit. Siemens recommends the use of the
selection and simulation program Win-Soft starter. See Technical
specifications for information about rated currents for ambient
temperatures >50 °C.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule NEMA
SIRIUS Soft Starters
Standard Applications—SIRIUS 3RW40 Soft Starters
Selection
Overview
Area of application
SIRIUS 3RW40
SIRIUS 3RW40 soft starters have all the same advantages as the
3RW30/31 soft starters including soft start and soft stop,1) and
internal bypass. At the same time they come with additional
functions, i.e. selectable solid-state motor overload, intrinsic
device protection and adjustable current limiting, as well as a
new patented two-phase control method (Polarity Balancing)
that is unique in this rating range.
SIRIUS 3RW40 soft starters are part of the SIRIUS modular
system. This results in advantages such as identical sizes and a
uniform connection system. Thanks to their particularly compact
design, SIRIUS 3RW40 soft starters are only half as big as
comparable wye-delta starters. Hence they can be mounted in
compact space requirements in the control cabinet. Configuring
and installation are carried out quickly and easily thanks to the
3-wire connection.
The SIRIUS 3RW40 solid-state soft starters are suitable for soft
starting and stopping of three-phase asynchronous motors.
Using the patented two-phase control, the current is kept at
minimum values in all three phases throughout the entire starting
time and typical direct current components are eliminated. This
not only enables the two-phase starting of motors up to 300 Hp
(at 460 V) but also avoids the current and torque peaks which
occur i.e. with wye-delta starters or other mechanical starters.
SIRIUS 3RW40 for three-phase motors
Soft starters rated up to 300 Hp (at 460 V) for standard
applications in three-phase power systems. Extremely small
sizes, low power losses and simple commissioning are just three
of the many advantages of the SIRIUS 3RW40 soft starters.
Application areas
• Fans
• Pumps
• Building/construction machines
• Presses
• Escalators
• Transport systems
• Air conditioning systems
• Ventilators
• Assembly lines
• Compressors and coolers
• Operating mechanisms
Applicable standards
• IEC 60947-2
• UL/CSA #E143112
A
200 V
230 V
460 V
575 V
hp
hp
hp
hp
Size
Order No.
List
Price $
Approx. weight
per PU
CONTROL
PRODUCTS
Ambient temperature 50 °C 3)
Rated operating Rated output of three-phase induction motors for rated
operating voltage Ue
current Ie
16
3RW40 76-6BB44
3RW40 56-6BB44
Inline circuit, rated operating voltage 200 ... 460 V
117
145
30
40
40
50
75
100
–
–
S6
3RW40 55-@BB@4
3RW40 56-@BB@4
2237.00
2460.00
5.700
5.700
205
248
60
75
75
100
150
200
–
–
S12
3RW40 73-@BB@4
3RW40 74-@BB@4
2879.00
3243.00
7.000
7.000
315
385
100
125
125
1250
250
300
–
–
3RW40 75-@BB@4
3RW40 76-@BB@4
3578.00
4585.00
7.000
7.000
Inline circuit, rated operating voltage 400 ... 600 V
117
145
–
–
–
–
75
100
100
150
S6
3RW40 55-@BB@5
3RW40 56-@BB@5
2573.00
2829.00
5.700
5.700
205
248
–
–
–
–
150
200
200
250
S12
3RW40 73-@BB@5
3RW40 74-@BB@5
3321.00
3735.00
7.000
7.000
315
385
–
–
–
–
250
300
300
400
3RW40 75-@BB@5
3RW40 76-@BB@5
4115.00
5278.00
7.000
7.000
Order No. extension for connection method
• with spring-loaded terminals
• with screw-type terminals
2
6
Soft Starter
Control
Order No. extension for the rated control supply voltage Us
2)
• 115 V AC
• 230 V AC
3
4
1) Soft stop not available on 3RW31.
2) Control by way of the internal 24 V DC supply and direct control by means
of PLC possible.
3) For other temperature ratings, see the Industrial Controls catalog
CPPC-06000-0806.
The SIRIUS 3RW40 solid-state soft starters are designed for
easy starting conditions. JLoad < 10 x JMotor. In the event of
deviating conditions or increased duty cycle, it may be
necessary to choose a larger device. Siemens recommends the
use of the selection and simulation program Win-SOFTSTARTER.
Selection of the soft starter depends on the motor's rated
current.
Discount Schedule IEC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-165
SIRIUS Soft Starters
High Feature Applications—SIRIUS 3RW44 Soft Starters
Selection
prompted, multi-line graphic display with background lighting.
The optimized motor ramp-up and ramp-down can be effected
by means of just a few settings with a previously selected
language. Four-key operation and plain-text displays for each
menu point guarantee full clarity at every moment of the
parameterization and operation.
Overview
SIRIUS 3RW44
In addition to soft starting and soft stopping, the solid-state
SIRIUS 3RW44 soft starters provide numerous functions for
higher-level requirements. They cover a rating range up to
900Hp at 460 V in the inline circuit1).
The SIRIUS 3RW44 soft starters are characterized by a compact
design for space-saving and clearly arranged control cabinet
layouts. For optimized motor starting and stopping, the
innovative SIRIUS 3RW44 soft starters are an attractive
alternative with considerable savings potential compared to
applications with a frequency converter. The new torque control
and adjustable current limiting enable these high feature soft
starters to be used in nearly every conceivable task. They
reliably mitigate the sudden torque applications and current
peaks during motor starting and stopping. This creates savings
potential when calculating the size of the controlgear and when
servicing the machinery installed. Be it for inline circuits or
inside-delta circuits – the SIRIUS 3RW44 soft starter offers
savings especially in terms of size and equipment costs.
Combinations of various starting, operating and ramp-down
possibilities ensure an optimum adaptation to the applicationspecific requirements. Operating and commissioning can be
performed by means of the user-friendly keypad and a menu-
Applicable standards
• IEC 60947-4-2
• UL/CSA #E143112
Area of application
The SIRIUS 3RW44 solid-state soft starters are suitable for the
torque-controlled soft starting and smooth ramp-down as well as
braking of three-phase asynchronous motors.
Application areas, e.g.
• Pumps
• Ventilators
• Compressors
• Water transport
• Conveying systems and lifts
• Hydraulics
• Mills
• Saws
• Crushers
• Mixers
• Centrifuges
• Industrial cooling and
• refrigerating systems
1) Current range available up to 600Hp at 460 V.
CONTROL
PRODUCTS
16
Selection and ordering data
3RW44 36-6BC44
3RW44 27-1BC44
Ambient temperature 50 °C
3RW44 47-6BC44
1)
Order No.
Rated operating
current Ie
Rated output of three-phase induction motors for rated operating
voltage Ue
A
200 V
hp
230 V
hp
460 V
hp
List
Price $
Approx. weight
per PU
575 V
hp
kg
Soft Starter
Control
Inline circuit, rated operating voltage 200 ... 460 V
26
7.5
7.5
15
32
10
10
20
42
10
15
25
51
15
15
30
68
20
20
50
82
25
25
60
Order No. extension for connection method
• with spring-loaded terminals
• with screw-type terminals
100
30
30
75
117
30
40
75
145
40
50
100
180
50
60
125
215
60
75
150
280
75
100
200
315
100
125
250
385
125
150
300
494
150
200
400
551
150
200
450
615
200
250
500
693
200
250
550
780
250
300
600
Order No. extension for connection method
• with spring-loaded terminals
• with screw-type terminals
Order No. extension for the rated control supply voltage Us
• 115 V AC
• 230 V AC
–
–
–
–
–
–
3RW44 22-@ BC@ 4
3RW44 23-@ BC@ 4
3RW44 24-@ BC@ 4
3RW44 25-@ BC@ 4
3RW44 26-@ BC@ 4
3RW44 27-@ BC@ 4
2337.00
2472.00
2494.00
2963.00
3109.00
3735.00
4.900
4.900
4.900
4.900
4.900
4.900
–
–
–
–
–
–
–
–
–
–
–
–
–
3
1
3RW44 34-@ BC@ 4
3RW44 35-@ BC@ 4
3RW44 36-@ BC@ 4
3RW44 43-@ BC@ 4
3RW44 44-@ BC@ 4
3RW44 45-@ BC@ 4
3RW44 46-@ BC@ 4
3RW44 47-@ BC@ 4
3RW44 53-@ BC@ 4
3RW44 54-@ BC@ 4
3RW44 55-@ BC@ 4
3RW44 56-@ BC@ 4
3RW44 57-@ BC@ 4
4406.00
4652.00
6039.00
6565.00
6922.00
7503.00
8342.00
9282.00
10959.00
12580.00
13979.00
15656.00
19570.00
7.900
7.900
7.900
10.300
10.300
10.300
10.300
10.300
50.000
50.000
50.000
50.000
50.000
2
6
3
4
1) For other temperature ratings, see technical information in 2006 Industrial
Catalog CPPC-06000-0106.
16-166
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
SIRIUS Soft Starters
High Feature Applications—SIRIUS 3RW44 Soft Starters
Selection
Selection and ordering data
3RW44 36-6BC44
3RW44 27-1BC44
3RW44 47-6BC44
Ambient temperature 50 °C 2)
Order No.
Rated operating
current Ie
Rated output of three-phase induction motors for rated operating
voltage Ue
200 V
230 V
460 V
575 V
A
hp
hp
hp
hp
List
Price $
Approx. weight
per PU
kg
Inline circuit, rated operating voltage 400 ... 600 V
26
32
42
51
68
82
–
–
–
–
–
–
–
–
–
–
–
–
15
20
25
30
50
60
20
25
30
40
50
75
3RW44 22-@BC@5
3RW44 23-@BC@5
3RW44 24-@BC@5
3RW44 25-@BC@5
3RW44 26-@BC@5
3RW44 27-@BC@5
2695.00
2852.00
2874.00
3410.00
3578.00
4305.00
4.900
4.900
4.900
4.900
4.900
4.900
Order No. extension for connection method
• with spring-loaded terminals
• with screw-type terminals
100
–
117
–
145
–
–
–
–
75
75
100
75
100
125
3RW44 34-@BC@5
3RW44 35-@BC@5
3RW44 36-@BC@5
5077.00
5356.00
6945.00
7.900
7.900
7.900
180
215
280
315
385
–
–
–
–
–
–
–
–
–
–
125
150
200
250
300
150
200
250
300
400
3RW44 43-@BC@5
3RW44 44-@BC@5
3RW44 45-@BC@5
3RW44 46-@BC@5
3RW44 47-@BC@5
7559.00
7962.00
8633.00
9595.00
10680.00
10.300
10.300
10.300
10.300
10.300
494
551
615
693
780
–
–
–
–
–
–
–
–
–
–
400
450
500
550
600
500
550
600
700
800
3RW44 53-@BC@4
3RW44 54-@BC@4
3RW44 55-@BC@4
3RW44 56-@BC@4
3RW44 57-@BC@4
12603.00
14470.00
16081.00
18004.00
22510.00
50,000
50,000
50,000
50,000
50,000
3
1
16
CONTROL
PRODUCTS
Order No. extension for connection method
• with spring-loaded terminals
• with screw-type terminals
2
6
Order No. extension for the rated control supply voltage Us1)
• 115 V AC
• 230 V AC
1) Control by way of the internal 24 V DC supply and direct control by means
of PLC possible.
2) For other temperature ratings, see technical information in the Industrial
Controls Catalog CPPC-06000-0803.
Soft starter selection depends on the motor's rated current.
3
4
The 3RW44 solid-state soft starters are designed for normal
starting (class 10). (Inertia load of the overall operating
mechanism JLoad < 10 x JMotor; starting current 350 % x Ie for
20 s or similar load.) For any other conditions of use, the devices
should be selected using the selection and simulation program
Win-SOFTSTARTER. See technical specifications for information
about rated currents for ambient temperatures > 40 °C and
operating frequency.
Soft Starter
Control
Discount Schedule IEC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-167
Control Products
Enclosed 3RW40
Selection
Ordering Information
3RW40 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Voltage ramp up and ramp down
▪ Current limit adjustment of 125 - 550%
▪ Internal overload class 10, 15, or 20
▪ Internal self protection
▪ Fault monitoring
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW40 is designed for normal
starting applications (Class 10
applications).
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 73 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW40 Sirius softstarter with built-in OL
and bypass
▪ Control circuit transformer
▪ Line side power terminal block
▪ Reset button
Ideal applications for 3RW40 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Building/construction machines
▪ Presses
▪ Escalators
▪ Transport systems
▪ Air conditioning systems
▪ Ventilators
▪ Assembly lines
▪ Compressors and chillers
The 3RW40 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 73 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW40 for Standard Applications
CONTROL
PRODUCTS
16
Enclosed Non-Combination (Starter Only)
Rated
Operating
Current
117
145
205
248
315
385
117
145
205
248
315
385
MAX HP
Class 10 Light Duty (350% * Ie for 10s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 73AS3_BFA
4700.00
40 50 100 — 75
3RW4056-6BB34 73BS3_BFA
5100.00
60 75 150 — 112 3RW4073-6BB34 73CS3_BFA
5700.00
75 100 200 — 149 3RW4074-6BB34 73DS3_BFA
6100.00
100 125 250 — 186 3RW4075-6BB34 73ES3_BFA
6800.00
125 150 300 — 224 3RW4076-6BB34 73FS3_BFA
8900.00
KW
List
Price $
4700.00
5200.00
5600.00
6100.00
6800.00
8900.00
NEMA 12
73AS3_0FA
73BS3_0FA
73CS3_0FA
73DS3_0FA
73ES3_0FA
73FS3_0FA
5000.00
5500.00
6200.00
6700.00
7500.00
9800.00
6
2
3
4
73AS35DFA
73BS35DFA
73CS35DFA
73DS35DFA
73ES35DFA
73FS35DFA
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 73AS3_BFA
4700.00
40 50 100 — 75
3RW4056-6BB34 73BS3_BFA
5100.00
60 60 125 — 93
3RW4073-6BB34 73CS3_BFA
5700.00
60 75 150 — 112 3RW4074-6BB34 73DS3_BFA
6100.00
75 100 200 — 149 3RW4075-6BB34 73ES3_BFA
6800.00
100 125 250 — 186 3RW4076-6BB34 73FS3_BFA
8900.00
NEMA 3R
73AS3_DFA
73BS3_DFA
73CS3_DFA
73DS3_DFA
73ES3_DFA
73FS3_DFA
—
—
—
—
—
—
—
—
—
—
—
—
75
100
150
200
250
300
100
150
200
250
300
400
—
—
—
—
—
—
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
73AS35BFA
73BS35BFA
73CS35BFA
73DS35BFA
73ES35BFA
73FS35BFA
NEMA 3R
73AS3_DFA
73BS3_DFA
73CS3_DFA
73DS3_DFA
73ES3_DFA
73FS3_DFA
List
Price $
4700.00
5100.00
5700.00
6100.00
6800.00
8900.00
NEMA 4
73AS3_EFA
73BS3_EFA
73CS3_EFA
73DS3_EFA
73ES3_EFA
73FS3_EFA
List
Price $
5000.00
5400.00
6000.00
6500.00
7200.00
9400.00
5100.00
5600.00
6200.00
6600.00
7200.00
9800.00
6
2
3
4
73AS350FA
73BS350FA
73CS350FA
73DS350FA
73ES350FA
73FS350FA
List
Price $
4700.00
5200.00
5600.00
6100.00
6800.00
8900.00
NEMA 12
73AS3_0FA
73BS3_0FA
73CS3_0FA
73DS3_0FA
73ES3_0FA
73FS3_0FA
5100.00
5600.00
6200.00
6600.00
7200.00
9800.00
6
2
3
4
73AS350FA
73BS350FA
73CS350FA
73DS350FA
73ES350FA
73FS350FA
NEMA 4/4X
73AS3_WFA
73BS3_WFA
73CS3_WFA
73DS3_WFA
73ES3_WFA
73FS3_WFA
List
Price $
5800.00
6300.00
6800.00
7300.00
7900.00
11800.00
5000.00
5500.00
6200.00
6700.00
7500.00
9800.00
6
2
3
4
73AS35EFA
73BS35EFA
73CS35EFA
73DS35EFA
73ES35EFA
73FS35EFA
5100.00
5800.00
6600.00
7100.00
7900.00
10300.00
6
2
3
4
73AS35WFA
73BS35WFA
73CS35WFA
73DS35WFA
73ES35WFA
73FS35WFA
6200.00
6700.00
7400.00
7800.00
8600.00
12600.00
List
Price $
4700.00
5100.00
5700.00
6100.00
6800.00
8900.00
NEMA 4
73AS3_EFA
73BS3_EFA
73CS3_EFA
73DS3_EFA
73ES3_EFA
73FS3_EFA
List
Price $
5000.00
5400.00
6000.00
6500.00
7200.00
9400.00
73AS3_WFA
73BS3_WFA
73CS3_WFA
73DS3_WFA
73ES3_WFA
73FS3_WFA
List
Price $
5800.00
6300.00
6800.00
7300.00
7900.00
11800.00
5000.00
5500.00
6200.00
6700.00
7500.00
9800.00
6
2
3
4
73AS35EFA
73BS35EFA
73CS35EFA
73DS35EFA
73ES35EFA
73FS35EFA
5100.00
5800.00
6600.00
7100.00
7900.00
10300.00
6
2
3
4
73AS35WFA
73BS35WFA
73CS35WFA
73DS35WFA
73ES35WFA
73FS35WFA
6200.00
6700.00
7400.00
7800.00
8600.00
12600.00
Stainless Steel
Soft Starter
Control
Enclosed Non-Combination (Starter Only)
Rated
Operating
Current
112
132
185
205
280
340
112
132
185
205
280
340
MAX HP
—
—
—
—
—
—
Starter
—
—
—
—
—
—
KW
75
100
125
150
200
250
75
125
150
200
250
300
—
—
—
—
—
—
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
73AS35BFA
73BS35BFA
73CS35BFA
73DS35BFA
73ES35BFA
73FS35BFA
5000.00
5500.00
6200.00
6700.00
7500.00
9800.00
6
2
3
4
73AS35DFA
73BS35DFA
73CS35DFA
73DS35DFA
73ES35DFA
73FS35DFA
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
16-168
Starter
NEMA 4/4X
Stainless Steel
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Control Products
Enclosed 3RW40
Selection
Ordering Information
3RW40 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Voltage ramp up and ramp down
▪ Current limit adjustment of 125 - 550%
▪ Internal overload class 10, 15, or 20
▪ Internal self protection
▪ Fault monitoring
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW40 is designed for normal
starting applications (Class 10
applications).
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 non-combination starters include:
▪ NEMA rated enclosure
▪ Circuit breaker disconnect with shunt trip
▪ 3RW40 Sirius softstarter with built-in OL
and bypass
▪ Control circuit transformer
Ideal applications for 3RW40 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Building/construction machines
▪ Presses
▪ Escalators
▪ Transport systems
▪ Air conditioning systems
▪ Ventilators
▪ Assembly lines
▪ Compressors and chillers
The 3RW40 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW40 for Standard Applications
Enclosed Circuit Breaker Combination (Starter with Circuit Breaker Disconnect)
Class 10 Light Duty (350% * Ie for 10s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 74AS3_BFAP 6300.00
40 50 100 — 75
3RW4056-6BB34 74BS3_BFAP 6900.00
60 75 150 — 112 3RW4073-6BB34 74CS3_BFAP 8100.00
75 100 200 — 149 3RW4074-6BB34 74DS3_BFAP 8500.00
100 125 250 — 186 3RW4075-6BB34 74ES3_BFAP 10700.00
125 150 300 — 224 3RW4076-6BB34 74FS3_BFAP 12200.00
—
—
—
—
—
—
—
—
—
—
—
—
KW
75
100
150
200
250
300
100
150
200
250
300
400
—
—
—
—
—
—
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
74AS35BFAP
74BS35BFAP
74CS35BFAP
74DS35BFAP
74ES35BFAP
74FS35BFAP
6700.00
7300.00
8300.00
9100.00
11400.00
12200.00
List
NEMA 3R
Price $
74AS3_DFAP 6300.00
74BS3_DFAP 6900.00
74CS3_DFAP 8100.00
74DS3_DFAP 8500.00
74ES3_DFAP 10700.00
74FS3_DFAP 12200.00
List
NEMA 12
Price $
74AS3_0FAP 6300.00
74BS3_0FAP 6900.00
74CS3_0FAP 8100.00
74DS3_0FAP 8500.00
74ES3_0FAP 10700.00
74FS3_0FAP 12200.00
List
NEMA 4
Price $
74AS3_EFAP 6700.00
74BS3_EFAP 7300.00
74CS3_EFAP 8600.00
74DS3_EFAP 9000.00
74ES3_EFAP 11300.00
74FS3_EFAP 12900.00
NEMA 4/4X
List
Price $
74AS3_WFAP 9500.00
74BS3_WFAP 10100.00
6
2
3
4
74AS35DFAP 6600.00
74BS35DFAP 7300.00
74CS35DFAP 8600.00
74DS35DFAP 9000.00
74ES35DFAP 11400.00
74FS35DFAP 12200.00
6
2
3
4
74AS350FAP 6600.00
74BS350FAP 7300.00
74CS350FAP 8600.00
74DS350FAP 9000.00
74ES350FAP 11400.00
74FS350FAP 12200.00
6
2
3
4
74AS35EFAP 7000.00
74BS35EFAP 7700.00
74CS35EFAP 9100.00
74DS35EFAP 9500.00
74ES35EFAP 12000.00
74FS35EFAP 13800.00
6
2
3
4
74AS35WFAP 9900.00
74BS35WFAP 10600.00
Stainless Steel
CONTROL
PRODUCTS
117
145
205
248
315
385
MAX HP
16
Rated
Operating
Current
117
145
205
248
315
385
Enclosed Circuit Breaker Combination (Starter with Circuit Breaker Disconnect)
112
132
185
205
280
340
MAX HP
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 74AS3_BFAP 6300.00
40 50 100 — 75
3RW4056-6BB34 74BS3_BFAP 6900.00
60 60 125 — 93
3RW4073-6BB34 74CS3_BFAP 8100.00
60 75 150 — 112 3RW4074-6BB34 74DS3_BFAP 8500.00
75 100 200 — 149 3RW4075-6BB34 74ES3_BFAP 10700.00
100 125 250 — 186 3RW4076-6BB34 74FS3_BFAP 12200.00
—
—
—
—
—
—
—
—
—
—
—
—
KW
75
100
125
150
200
250
75
125
150
200
250
300
—
—
—
—
—
—
Starter
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
74AS35BFAP 6700.00
74BS35BFAP 7300.00
74CS35BFAP 8300.00
74DS35BFAP 9100.00
74ES35BFAP 11400.00
74FS35BFAP 12200.00
List
NEMA 3R
Price $
74AS3_DFAP 6300.00
74BS3_DFAP 6900.00
74CS3_DFAP 8100.00
74DS3_DFAP 8500.00
74ES3_DFAP 10700.00
74FS3_DFAP 12200.00
List
NEMA 12
Price $
74AS3_0FAP 6300.00
74BS3_0FAP 6900.00
74CS3_0FAP 8100.00
74DS3_0FAP 8500.00
74ES3_0FAP 10700.00
74FS3_0FAP 12200.00
List
NEMA 4
Price $
74AS3_EFAP 6700.00
74BS3_EFAP 7300.00
74CS3_EFAP 8600.00
74DS3_EFAP 9000.00
74ES3_EFAP 11300.00
74FS3_EFAP 12900.00
List
Price $
74AS3_WFAP 9500.00
74BS3_WFAP 10100.00
6
2
3
4
74AS35DFAP 6600.00
74BS35DFAP 7300.00
74CS35DFAP 8600.00
74DS35DFAP 9000.00
74ES35DFAP 11400.00
74FS35DFAP 12200.00
6
2
3
4
74AS350FAP 6600.00
74BS350FAP 7300.00
74CS350FAP 8600.00
74DS350FAP 9000.00
74ES350FAP 11400.00
74FS350FAP 12200.00
6
2
3
4
74AS35EFAP 7000.00
74BS35EFAP 7700.00
74CS35EFAP 9100.00
74DS35EFAP 9500.00
74ES35EFAP 12000.00
74FS35EFAP 13800.00
6
2
3
4
74AS35WFAP 9900.00
74BS35WFAP 10600.00
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
Discount Schedule IEC
Starter
NEMA 4/4X
Stainless Steel
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-169
Soft Starter
Control
Rated
Operating
Current
112
132
185
205
280
340
Control Products
Enclosed 3RW40
Selection
Ordering Information
3RW40 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Voltage ramp up and ramp down
▪ Current limit adjustment of 125 - 550%
▪ Internal overload class 10, 15, or 20
▪ Internal self protection
▪ Fault monitoring
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW40 is designed for normal
starting applications (Class 10
applications).
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 combination starters include:
▪ NEMA rated enclosure
▪ Fusible disconnect
▪ 3RW40 Sirius softstarter with built-in OL
and bypass
▪ Control circuit transformer
Ideal applications for 3RW40 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Building/construction machines
▪ Presses
▪ Escalators
▪ Transport systems
▪ Air conditioning systems
▪ Ventilators
▪ Assembly lines
▪ Compressors and chillers
The 3RW40 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW40 for Standard Applications
CONTROL
PRODUCTS
16
Enclosed Fusible Combination (Starter with Fusible Disconnect)
Rated
Operating
Current
117
145
205
248
315
385
117
145
205
248
315
385
MAX HP
Class 10 Light Duty (350% * Ie for 10s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 74AS3_BFAF 5700.00
40 50 100 — 75
3RW4056-6BB34 74BS3_BFAF 7200.00
60 75 150 — 112 3RW4073-6BB34 74CS3_BFAF 8300.00
75 100 200 — 149 3RW4074-6BB34 74DS3_BFAF 8700.00
100 125 250 — 186 3RW4075-6BB34 74ES3_BFAF 10900.00
125 150 300 — 224 3RW4076-6BB34 74FS3_BFAF 12300.00
—
—
—
—
—
—
—
—
—
—
—
—
KW
75
100
150
200
250
300
100
150
200
250
300
400
—
—
—
—
—
—
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
74AS35BFAF 6100.00
74BS35BFAF 7700.00
74CS35BFAF 8500.00
74DS35BFAF 9200.00
74ES35BFAF 11600.00
74FS35BFAF 12200.00
List
NEMA 3R
Price $
74AS3_DFAF 5700.00
74BS3_DFAF 7200.00
74CS3_DFAF 8200.00
74DS3_DFAF 8700.00
74ES3_DFAF 10900.00
74FS3_DFAF 12400.00
List
NEMA 12
Price $
74AS3_0FAF 5700.00
74BS3_0FAF 7200.00
74CS3_0FAF 8200.00
74DS3_0FAF 8700.00
74ES3_0FAF 10900.00
74FS3_0FAF 12300.00
List
NEMA 4
Price $
74AS3_EFAF 6000.00
74BS3_EFAF 7600.00
74CS3_EFAF 8700.00
74DS3_EFAF 9200.00
74ES3_EFAF 11500.00
74FS3_EFAF 13000.00
NEMA 4/4X
List
Price $
74AS3_WFAF 8900.00
74BS3_WFAF 10400.00
6
2
3
4
74AS35DFAF 6000.00
74BS35DFAF 7600.00
74CS35DFAF 8800.00
74DS35DFAF 9200.00
74ES35DFAF 11600.00
74FS35DFAF 12200.00
6
2
3
4
74AS350FAF 6100.00
74BS350FAF 7700.00
74CS350FAF 8800.00
74DS350FAF 9200.00
74ES350FAF 11600.00
74FS350FAF 12200.00
6
2
3
4
74AS35EFAF 6300.00
74BS35EFAF 8000.00
74CS35EFAF 9300.00
74DS35EFAF 9700.00
74ES35EFAF 12200.00
74FS35EFAF 13900.00
6
2
3
4
74AS35WFAF 9300.00
74BS35WFAF 10900.00
List
NEMA 3R
Price $
74AS3_DFAF 5700.00
74BS3_DFAF 7200.00
74CS3_DFAF 8200.00
74DS3_DFAF 8700.00
74ES3_DFAF 10900.00
74FS3_DFAF 12400.00
List
NEMA 12
Price $
74AS3_0FAF 5700.00
74BS3_0FAF 7200.00
74CS3_0FAF 8200.00
74DS3_0FAF 8700.00
74ES3_0FAF 10900.00
74FS3_0FAF 12300.00
List
NEMA 4
Price $
74AS3_EFAF 6000.00
74BS3_EFAF 7600.00
74CS3_EFAF 8700.00
74DS3_EFAF 9200.00
74ES3_EFAF 11500.00
74FS3_EFAF 13000.00
List
Price $
74AS3_WFAF 8900.00
74BS3_WFAF 10400.00
6
2
3
4
74AS35DFAF 6000.00
74BS35DFAF 7600.00
74CS35DFAF 8800.00
74DS35DFAF 9200.00
74ES35DFAF 11600.00
74FS35DFAF 12200.00
6
2
3
4
74AS350FAF 6100.00
74BS350FAF 7700.00
74CS350FAF 8800.00
74DS350FAF 9200.00
74ES350FAF 11600.00
74FS350FAF 12200.00
6
2
3
4
74AS35EFAF 6300.00
74BS35EFAF 8000.00
74CS35EFAF 9300.00
74DS35EFAF 9700.00
74ES35EFAF 12200.00
74FS35EFAF 13900.00
6
2
3
4
74AS35WFAF 9300.00
74BS35WFAF 10900.00
Stainless Steel
Soft Starter
Control
Enclosed Fusible Combination (Starter with Fusible Disconnect)
Rated
Operating
Current
112
132
185
205
280
340
112
132
185
205
280
340
MAX HP
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
30 40 75 — 56
3RW4055-6BB34 74AS3_BFAF 5700.00
40 50 100 — 75
3RW4056-6BB34 74BS3_BFAF 7200.00
60 60 125 — 93
3RW4073-6BB34 74CS3_BFAF 8300.00
60 75 150 — 112 3RW4074-6BB34 74DS3_BFAF 8700.00
75 100 200 — 149 3RW4075-6BB34 74ES3_BFAF 10900.00
100 125 250 — 186 3RW4076-6BB34 74FS3_BFAF 12300.00
—
—
—
—
—
—
Starter
—
—
—
—
—
—
KW
75
100
125
150
200
250
75
125
150
200
250
300
—
—
—
—
—
—
200V
230V
380V
460V
3RW4055-6BB35
3RW4056-6BB35
3RW4073-6BB35
3RW4074-6BB35
3RW4075-6BB35
3RW4076-6BB35
6
2
3
4
74AS35BFAF 6100.00
74BS35BFAF 7700.00
74CS35BFAF 8500.00
74DS35BFAF 9200.00
74ES35BFAF 11600.00
74FS35BFAF 12200.00
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
16-170
Starter
NEMA 4/4X
Stainless Steel
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 5, 10, 15, 20, or 30
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 73 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Control circuit transformer
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 73 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
Enclosed Non-Combination (Starter Only)
MAX HP
Class 10 Light Duty (350% * Ie for 10s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
7.5 7.5 15 — 12
3RW4422-1BC34 73AT3_BFA
3800.00
10 10 20 — 15
3RW4423-1BC34 73BT3_BFA
4000.00
10 15 25 — 19
3RW4424-1BC34 73CT3_BFA
4300.00
15 15 30 — 22
3RW4425-1BC34 73DT3_BFA
4600.00
20 25 50 — 37
3RW4426-1BC34 73ET3_BFA
4800.00
25 30 60 — 45
3RW4427-1BC34 73FT3_BFA
5200.00
30 30 75 — 56
3RW4434-6BC34 73GT3_BFA
6100.00
30 40 75 — 56
3RW4435-6BC34 73HT3_BFA
6800.00
40 50 100 — 75
3RW4436-6BC34 73JT3_BFA
7600.00
60 60 125 — 93
3RW4443-6BC34 73KT3_BFA
8800.00
60 75 150 — 112 3RW4444-6BC34 73LT3_BFA
9600.00
75 100 200 — 149 3RW4445-6BC34 73MT3_BFA 11900.00
100 125 250 — 186 3RW4446-6BC34 73NT3_BFA 13300.00
125 150 300 — 224 3RW4447-6BC34 73PT3_BFA 15000.00
150 200 400 — 298 3RW4453-6BC34 73QT_BFA
150 200 450 — 336 3RW4454-6BC34 73RT_BFA
200 250 500 — 373 3RW4455-6BC34 73ST_BFA
200 250 550 —
3RW4456-6BC34 73TT_BFA
200 250 600 — 447 3RW4457-6BC34 73WT_BFA
KW
List
Price $
3700.00
3900.00
4300.00
4500.00
4800.00
5300.00
6100.00
6800.00
7600.00
8800.00
9600.00
11800.00
13300.00
14900.00
NEMA 12
73AT3_0FA
73BT3_0FA
73CT3_0FA
73DT3_0FA
73ET3_0FA
73FT3_0FA
73GT3_0FA
73HT3_0FA
73JT3_0FA
73KT3_0FA
73LT3_0FA
73MT3_0FA
73NT3_0FA
73PT3_0FA
73QT_0FA
73RT_0FA
73ST_0FA
73TT_0FA
73WT_0FA
List
Price $
3800.00
4000.00
4300.00
4600.00
4800.00
5200.00
6000.00
6700.00
7600.00
8800.00
9600.00
11800.00
13300.00
14900.00
NEMA 4
73AT3_EFA
73BT3_EFA
73CT3_EFA
73DT3_EFA
73ET3_EFA
73FT3_EFA
73GT3_EFA
73HT3_EFA
73JT3_EFA
73KT3_EFA
73LT3_EFA
73MT3_EFA
73NT3_EFA
73PT3_EFA
73QT_EFA
73RT_EFA
73ST_EFA
73TT_EFA
73WT_EFA
List
Price $
3900.00
4200.00
4600.00
4900.00
5100.00
5500.00
6300.00
7100.00
8000.00
9300.00
10100.00
12400.00
13900.00
15700.00
NEMA 4/4X
List
Price $
73AT3_WFA
4200.00
73BT3_WFA
4400.00
73CT3_WFA
4800.00
73DT3_WFA
5000.00
73ET3_WFA
5200.00
73FT3_WFA
6400.00
73GT3_WFA
7100.00
73HT3_WFA
7900.00
73JT3_WFA
8700.00
73KT3_WFA
9900.00
73LT3_WFA 10800.00
73MT3_WFA 14700.00
73NT3_WFA 16100.00
73PT3_WFA 17800.00
Stainless Steel
CONTROL
PRODUCTS
NEMA 3R
73AT3_DFA
73BT3_DFA
73CT3_DFA
73DT3_DFA
73ET3_DFA
73FT3_DFA
73GT3_DFA
73HT3_DFA
73JT3_DFA
73KT3_DFA
73LT3_DFA
73MT3_DFA
73NT3_DFA
73PT3_DFA
73QT_DFA
73RT_DFA
73ST_DFA
73TT_DFA
73WT_DFA
16
Rated
Operating
Current
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
AVAILABILITY TO BE ANNOUNCED
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
75
75
100
125
150
200
250
300
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
250
300
400
500
600
700
750
850
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6
2
3
4
73AT35BFA
73BT35BFA
73CT35BFA
73DT35BFA
73ET35BFA
73FT35BFA
73GT35BFA
73HT35BFA
73JT35BFA
73KT35BFA
73LT35BFA
73MT35BFA
73NT35BFA
73PT35BFA
73QT35BFA
73RT35BFA
73ST35BFA
73TT35BFA
73WT35BFA
4000.00
4300.00
4700.00
5000.00
5300.00
5700.00
6600.00
7400.00
8400.00
9700.00
10700.00
13100.00
14800.00
16600.00
6
2
3
4
73AT35DFA
73BT35DFA
73CT35DFA
73DT35DFA
73ET35DFA
73FT35DFA
73GT35DFA
73HT35DFA
73JT35DFA
73KT35DFA
73LT35DFA
73MT35DFA
73NT35DFA
73PT35DFA
73QT35DFA
73RT35DFA
73ST35DFA
73TT35DFA
73WT35DFA
4000.00
4300.00
4600.00
4900.00
5200.00
5800.00
6700.00
7500.00
8400.00
9600.00
10600.00
13100.00
14700.00
16600.00
6
2
3
4
73AT350FA
73BT350FA
73CT350FA
73DT350FA
73ET350FA
73FT350FA
73GT350FA
73HT350FA
73JT350FA
73KT350FA
73LT350FA
73MT350FA
73NT350FA
73PT350FA
73QT350FA
73RT350FA
73ST350FA
73TT350FA
73WT350FA
4000.00
4300.00
4700.00
4900.00
5300.00
5700.00
6600.00
7400.00
8400.00
9700.00
10700.00
13100.00
14700.00
16600.00
6
2
3
4
73AT35EFA
73BT35EFA
73CT35EFA
73DT35EFA
73ET35EFA
73FT35EFA
73GT35EFA
73HT35EFA
73JT35EFA
73KT35EFA
73LT35EFA
73MT35EFA
73NT35EFA
73PT35EFA
73QT35EFA
73RT35EFA
73ST35EFA
73TT35EFA
73WT35EFA
4200.00
4600.00
5000.00
5300.00
5600.00
6000.00
7000.00
7800.00
8900.00
10200.00
11300.00
13800.00
15500.00
17500.00
6
2
3
4
73AT35WFA
73BT35WFA
73CT35WFA
73DT35WFA
73ET35WFA
73FT35WFA
73GT35WFA
73HT35WFA
73JT35WFA
73KT35WFA
73LT35WFA
73MT35WFA
73NT35WFA
73PT35WFA
4400.00
4700.00
5100.00
5400.00
5700.00
6900.00
7700.00
8500.00
9500.00
10800.00
11800.00
16000.00
17600.00
19500.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
Discount Schedule IEC
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-171
Soft Starter
Control
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 10, 15, or 20
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 73 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Control circuit transformer
▪ Line side power terminal block
▪ Reset button
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 73 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
CONTROL
PRODUCTS
16
Enclosed Non-Combination (Starter Only)
Rated
Operating
Current
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
634
650
MAX HP
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
7.5 7.5 15 — 12
3RW4422-1BC34 73AT3_BFA
3800.00
10 10 20 — 15
3RW4423-1BC34 73BT3_BFA
4000.00
10 15 25 — 19
3RW4424-1BC34 73CT3_BFA
4300.00
15 15 30 — 22
3RW4425-1BC34 73DT3_BFA
4600.00
20 25 50 — 37
3RW4426-1BC34 73ET3_BFA
4800.00
25 30 60 — 45
3RW4427-1BC34 73FT3_BFA
5200.00
30 30 60 — 45
3RW4434-6BC34 73GT3_BFA
6100.00
30 40 75 — 56
3RW4435-6BC34 73HT3_BFA
6800.00
40 50 75 — 56
3RW4436-6BC34 73JT3_BFA
7600.00
50 60 100 — 75
3RW4443-6BC34 73KT3_BFA
8800.00
60 75 125 — 93
3RW4444-6BC34 73LT3_BFA
9600.00
75 75 150 — 112 3RW4445-6BC34 73MT3_BFA 11900.00
75 100 200 — 149 3RW4446-6BC34 73NT3_BFA 13300.00
100 125 250 — 186 3RW4447-6BC34 73PT3_BFA 15000.00
150 150 400 — 298 3RW4453-6BC34 73QT_BFA
150 200 450 — 336 3RW4454-6BC34 73RT_BFA
200 200 500 — 373 3RW4455-6BC34 73ST_BFA
200 250 500 — 373 3RW4456-6BC34 73TT_BFA
200 250 550 — 373 3RW4457-6BC34 73WT_BFA
KW
NEMA 3R
73AT3_DFA
73BT3_DFA
73CT3_DFA
73DT3_DFA
73ET3_DFA
73FT3_DFA
73GT3_DFA
73HT3_DFA
73JT3_DFA
73KT3_DFA
73LT3_DFA
73MT3_DFA
73NT3_DFA
73PT3_DFA
73QT_DFA
73RT_DFA
73ST_DFA
73TT_DFA
73WT_DFA
List
Price $
3700.00
3900.00
4300.00
4500.00
4800.00
5300.00
6100.00
6800.00
7600.00
8800.00
9600.00
11800.00
13300.00
14900.00
NEMA 12
73AT3_0FA
73BT3_0FA
73CT3_0FA
73DT3_0FA
73ET3_0FA
73FT3_0FA
73GT3_0FA
73HT3_0FA
73JT3_0FA
73KT3_0FA
73LT3_0FA
73MT3_0FA
73NT3_0FA
73PT3_0FA
73QT_0FA
73RT_0FA
73ST_0FA
73TT_0FA
73WT_0FA
List
Price $
3800.00
4000.00
4300.00
4600.00
4800.00
5200.00
6000.00
6700.00
7600.00
8800.00
9600.00
11800.00
13300.00
14900.00
NEMA 4
73AT3_EFA
73BT3_EFA
73CT3_EFA
73DT3_EFA
73ET3_EFA
73FT3_EFA
73GT3_EFA
73HT3_EFA
73JT3_EFA
73KT3_EFA
73LT3_EFA
73MT3_EFA
73NT3_EFA
73PT3_EFA
73QT_EFA
73RT_EFA
73ST_EFA
73TT_EFA
73WT_EFA
List
Price $
3900.00
4200.00
4600.00
4900.00
5100.00
5500.00
6300.00
7100.00
8000.00
9300.00
10100.00
12400.00
13900.00
15700.00
NEMA 4/4X
List
Price $
73AT3_WFA
4200.00
73BT3_WFA
4400.00
73CT3_WFA
4800.00
73DT3_WFA
5000.00
73ET3_WFA
5200.00
73FT3_WFA
6400.00
73GT3_WFA
7100.00
73HT3_WFA
7900.00
73JT3_WFA
8700.00
73KT3_WFA
9900.00
73LT3_WFA 10800.00
73MT3_WFA 14700.00
73NT3_WFA 16100.00
73PT3_WFA 17800.00
Stainless Steel
Soft Starter
Control
AVAILABILITY TO BE ANNOUNCED
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
693
780
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
60
75
75
100
125
150
200
250
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
200
250
300
500
550
600
650
700
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
6
2
3
4
73AT35BFA
73BT35BFA
73CT35BFA
73DT35BFA
73ET35BFA
73FT35BFA
73GT35BFA
73HT35BFA
73JT35BFA
73KT35BFA
73LT35BFA
73MT35BFA
73NT35BFA
73PT35BFA
73QT35BFA
73RT35BFA
73ST35BFA
73TT35BFA
73WT35BFA
4000.00
4300.00
4700.00
5000.00
5300.00
5700.00
6600.00
7400.00
8400.00
9700.00
10700.00
13100.00
14800.00
16600.00
6
2
3
4
73AT35DFA
73BT35DFA
73CT35DFA
73DT35DFA
73ET35DFA
73FT35DFA
73GT35DFA
73HT35DFA
73JT35DFA
73KT35DFA
73LT35DFA
73MT35DFA
73NT35DFA
73PT35DFA
73QT35DFA
73RT35DFA
73ST35DFA
73TT35DFA
73WT35DFA
4000.00
4300.00
4600.00
4900.00
5200.00
5800.00
6700.00
7500.00
8400.00
9600.00
10600.00
13100.00
14700.00
16600.00
6
2
3
4
73AT350FA
73BT350FA
73CT350FA
73DT350FA
73ET350FA
73FT350FA
73GT350FA
73HT350FA
73JT350FA
73KT350FA
73LT350FA
73MT350FA
73NT350FA
73PT350FA
73QT350FA
73RT350FA
73ST350FA
73TT350FA
73WT350FA
4000.00
4300.00
4700.00
4900.00
5300.00
5700.00
6600.00
7400.00
8400.00
9700.00
10700.00
13100.00
14700.00
16600.00
6
2
3
4
73AT35EFA
73BT35EFA
73CT35EFA
73DT35EFA
73ET35EFA
73FT35EFA
73GT35EFA
73HT35EFA
73JT35EFA
73KT35EFA
73LT35EFA
73MT35EFA
73NT35EFA
73PT35EFA
73QT35EFA
73RT35EFA
73ST35EFA
73TT35EFA
73WT35EFA
4200.00
4600.00
5000.00
5000.00
5600.00
6000.00
7000.00
7800.00
8900.00
10200.00
11300.00
13800.00
15500.00
17500.00
6
2
3
4
73AT35WFA
73BT35WFA
73CT35WFA
73DT35WFA
73ET35WFA
73FT35WFA
73GT35WFA
73HT35WFA
73JT35WFA
73KT35WFA
73LT35WFA
73MT35WFA
73NT35WFA
73PT35WFA
4400.00
4700.00
5100.00
5400.00
5700.00
6900.00
7700.00
8500.00
9500.00
10800.00
11800.00
16000.00
17600.00
19500.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
16-172
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 5, 10, 15, 20, or 30
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Circuit breaker with disconnect
▪ Control circuit transformer
▪ Reset button
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
Enclosed Combination with Circuit Breaker Disconnect
MAX HP
Class 10 Light Duty (350% * Ie for 10s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
7.5 7.5 15 — 12
3RW4422-1BC34 74AT3_BFAP 4700.00
10 10 20 — 15
3RW4423-1BC34 74BT3_BFAP 4900.00
10 15 25 — 19
3RW4424-1BC34 74CT3_BFAP 5000.00
15 15 30 — 22
3RW4425-1BC34 74DT3_BFAP 5500.00
20 25 50 — 37
3RW4426-1BC34 74ET3_BFAP 5800.00
25 30 60 — 45
3RW4427-1BC34 74FT3_BFAP 6400.00
30 30 75 — 56
3RW4434-6BC34 74GT3_BFAP 6800.00
30 40 75 — 56
3RW4435-6BC34 74HT3_BFAP 7900.00
40 50 100 — 75
3RW4436-6BC34 74JT3_BFAP 8400.00
60 60 125 — 93
3RW4443-6BC34 74KT3_BFAP 10300.00
60 75 150 — 112 3RW4444-6BC34 74LT3_BFAP 11400.00
75 100 200 — 149 3RW4445-6BC34 74MT3_BFAP 14500.00
100 125 250 — 186 3RW4446-6BC34 74NT3_BFAP 16000.00
125 150 300 — 224 3RW4447-6BC34 74PT3_BFAP 17600.00
150 200 400 — 298 3RW4453-6BC34 73QT_BFAP
150 200 450 — 336 3RW4454-6BC34 73RT_BFAP
200 250 500 — 373 3RW4455-6BC34 73ST_BFAP
200 250 550 —
3RW4456-6BC34 73TT_BFAP
200 250 600 — 447 3RW4457-6BC34 73WT_BFAP
KW
List
Price $
4700.00
4900.00
5000.00
5500.00
5800.00
6400.00
6800.00
7900.00
8400.00
10300.00
11400.00
14500.00
16100.00
17700.00
NEMA 12
74AT3_0FAP
74BT3_0FAP
74CT3_0FAP
74DT3_0FAP
74ET3_0FAP
74FT3_0FAP
74GT3_0FAP
74HT3_0FAP
74JT3_0FAP
74KT3_0FAP
74LT3_0FAP
74MT3_0FAP
74NT3_0FAP
74PT3_0FAP
73QT_0FAP
73RT_0FAP
73ST_0FAP
73TT_0FAP
73WT_0FAP
List
Price $
4700.00
4900.00
5000.00
5500.00
5800.00
6400.00
6800.00
7900.00
8400.00
10300.00
11400.00
14500.00
16000.00
17600.00
NEMA 4
74AT3_EFAP
74BT3_EFAP
74CT3_EFAP
74DT3_EFAP
74ET3_EFAP
74FT3_EFAP
74GT3_EFAP
74HT3_EFAP
74JT3_EFAP
74KT3_EFAP
74LT3_EFAP
74MT3_EFAP
74NT3_EFAP
74PT3_EFAP
73QT_EFAP
73RT_EFAP
73ST_EFAP
73TT_EFAP
73WT_EFAP
List
Price $
5000.00
5200.00
5300.00
5800.00
6100.00
6800.00
7200.00
8300.00
8900.00
10900.00
12000.00
15300.00
16800.00
18500.00
NEMA 4/4X
Stainless Steel
74AT3_WFAP
74BT3_WFAP
74CT3_WFAP
74DT3_WFAP
74ET3_WFAP
74FT3_WFAP
74GT3_WFAP
74HT3_WFAP
74JT3_WFAP
List
Price $
5700.00
5900.00
6000.00
7100.00
7300.00
7700.00
8100.00
11100.00
11300.00
CONTROL
PRODUCTS
NEMA 3R
74AT3_DFAP
74BT3_DFAP
74CT3_DFAP
74DT3_DFAP
74ET3_DFAP
74FT3_DFAP
74GT3_DFAP
74HT3_DFAP
74JT3_DFAP
74KT3_DFAP
74LT3_DFAP
74MT3_DFAP
74NT3_DFAP
74PT3_DFAP
73QT_DFAP
73RT_DFAP
73ST_DFAP
73TT_DFAP
73WT_DFAP
16
Rated
Operating
Current
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
AVAILABILITY TO BE ANNOUNCED
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
75
75
100
125
150
200
250
300
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
250
300
400
500
600
700
750
850
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6
2
3
4
74AT35BFAP 5000.00
74BT35BFAP 5200.00
74CT35BFAP 5400.00
74DT35BFAP 5900.00
74ET35BFAP 6300.00
74FT35BFAP
6900.00
74GT35BFAP 7400.00
74HT35BFAP 8500.00
74JT35BFAP 9100.00
74KT35BFAP 11200.00
74LT35BFAP 12500.00
74MT35BFAP 15800.00
74NT35BFAP 17400.00
74PT35BFAP 19300.00
73QT35BFAPP
73RT35BFAPP
73ST35BFAPP
73TT35BFAPP
73WT35BFAPP
6
2
3
4
74AT35DFAP
74BT35DFAP
74CT35DFAP
74DT35DFAP
74ET35DFAP
74FT35DFAP
74GT35DFAP
74HT35DFAP
74JT35DFAP
74KT35DFAP
74LT35DFAP
74MT35DFAP
74NT35DFAP
74PT35DFAP
73QT35DFAP
73RT35DFAP
73ST35DFAP
73TT35DFAP
73WT35DFAP
5000.00
5200.00
5300.00
5900.00
6200.00
6900.00
7400.00
8500.00
9200.00
11200.00
12500.00
15800.00
17500.00
19400.00
6
2
3
4
74AT350FAP
74BT350FAP
74CT350FAP
74DT350FAP
74ET350FAP
74FT350FAP
74GT350FAP
74HT350FAP
74JT350FAP
74KT350FAP
74LT350FAP
74MT350FAP
74NT350FAP
74PT350FAP
73QT350FAP
73RT350FAP
73ST350FAP
73TT350FAP
73WT350FAP
5000.00
5200.00
5300.00
5900.00
6200.00
6900.00
7300.00
8500.00
9200.00
11200.00
12500.00
15800.00
17400.00
19300.00
6
2
3
4
74AT35EFAP
74BT35EFAP
74CT35EFAP
74DT35EFAP
74ET35EFAP
74FT35EFAP
74GT35EFAP
74HT35EFAP
74JT35EFAP
74KT35EFAP
74LT35EFAP
74MT35EFAP
74NT35EFAP
74PT35EFAP
73QT35EFAP
73RT35EFAP
73ST35EFAP
73TT35EFAP
73WT35EFAP
5300.00
5600.00
5700.00
6200.00
6600.00
7300.00
7800.00
9000.00
9400.00
11800.00
13200.00
16600.00
18400.00
20300.00
6
2
3
4
74AT35WFAP 6000.00
74BT35WFAP 6200.00
74CT35WFAP 6300.00
74DT35WFAP 7500.00
74ET35WFAP 7800.00
74FT35WFAP 8100.00
74GT35WFAP 8600.00
74HT35WFAP 11800.00
74JT35WFAP 12100.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
Discount Schedule IEC
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-173
Soft Starter
Control
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 5, 10, 15, 20, or 30
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Circuit breaker with disconnect
▪ Control circuit transformer
▪ Reset button
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
CONTROL
PRODUCTS
16
Enclosed Combination with Circuit Breaker Disconnect
Rated
Operating
Current
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
634
650
MAX HP
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
7.5 7.5 15 — 12
3RW4422-1BC34 74AT3_BFAP 4700.00
10 10 20 — 15
3RW4423-1BC34 74BT3_BFAP 4900.00
10 15 25 — 19
3RW4424-1BC34 74CT3_BFAP 5000.00
15 15 30 — 22
3RW4425-1BC34 74DT3_BFAP 5500.00
20 25 50 — 37
3RW4426-1BC34 74ET3_BFAP 5800.00
25 30 60 — 45
3RW4427-1BC34 74FT3_BFAP 6400.00
30 30 60 — 45
3RW4434-6BC34 74GT3_BFAP 6800.00
30 40 75 — 56
3RW4435-6BC34 74HT3_BFAP 7900.00
40 50 75 — 56
3RW4436-6BC34 74JT3_BFAP 8400.00
50 60 100 — 75
3RW4443-6BC34 74KT3_BFAP 10300.00
60 75 125 — 93
3RW4444-6BC34 74LT3_BFAP 11400.00
75 75 150 — 112 3RW4445-6BC34 74MT3_BFAP 14500.00
75 100 200 — 149 3RW4446-6BC34 74NT3_BFAP 16000.00
100 125 250 — 186 3RW4447-6BC34 74PT3_BFAP 17600.00
150 150 400 — 298 3RW4453-6BC34 73QT_BFAP
150 200 450 — 336 3RW4454-6BC34 73RT_BFAP
200 200 500 — 373 3RW4455-6BC34 73ST_BFAP
200 250 500 — 373 3RW4456-6BC34 73TT_BFAP
200 250 550 — 373 3RW4457-6BC34 73WT_BFAP
KW
NEMA 3R
74AT3_DFAP
74BT3_DFAP
74CT3_DFAP
74DT3_DFAP
74ET3_DFAP
74FT3_DFAP
74GT3_DFAP
74HT3_DFAP
74JT3_DFAP
74KT3_DFAP
74LT3_DFAP
74MT3_DFAP
74NT3_DFAP
74PT3_DFAP
73QT_DFAP
73RT_DFAP
73ST_DFAP
73TT_DFAP
73WT_DFAP
List
Price $
4700.00
4900.00
5000.00
5500.00
5800.00
6400.00
6800.00
7900.00
8400.00
10300.00
11400.00
14500.00
16100.00
17700.00
NEMA 12
74AT3_0FAP
74BT3_0FAP
74CT3_0FAP
74DT3_0FAP
74ET3_0FAP
74FT3_0FAP
74GT3_0FAP
74HT3_0FAP
74JT3_0FAP
74KT3_0FAP
74LT3_0FAP
74MT3_0FAP
74NT3_0FAP
74PT3_0FAP
73QT_0FAP
73RT_0FAP
73ST_0FAP
73TT_0FAP
73WT_0FAP
List
Price $
4700.00
4900.00
5000.00
5500.00
5800.00
6400.00
6800.00
7900.00
8400.00
10300.00
11400.00
14500.00
16000.00
17600.00
NEMA 4
74AT3_EFAP
74BT3_EFAP
74CT3_EFAP
74DT3_EFAP
74ET3_EFAP
74FT3_EFAP
74GT3_EFAP
74HT3_EFAP
74JT3_EFAP
74KT3_EFAP
74LT3_EFAP
74MT3_EFAP
74NT3_EFAP
74PT3_EFAP
73QT_EFAP
73RT_EFAP
73ST_EFAP
73TT_EFAP
73WT_EFAP
List
Price $
5000.00
5200.00
5300.00
5800.00
6100.00
6800.00
7200.00
8300.00
8900.00
10900.00
12000.00
15300.00
16800.00
18500.00
NEMA 4/4X
Stainless Steel
74AT3_WFAP
74BT3_WFAP
74CT3_WFAP
74DT3_WFAP
74ET3_WFAP
74FT3_WFAP
74GT3_WFAP
74HT3_WFAP
74JT3_WFAP
List
Price $
5700.00
5900.00
6000.00
7100.00
7300.00
7700.00
8100.00
11100.00
11300.00
Soft Starter
Control
AVAILABILITY TO BE ANNOUNCED
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
693
780
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
60
75
75
100
125
150
200
250
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
200
250
300
500
550
600
650
700
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
6
2
3
4
74AT35BFAP
74BT35BFAP
74CT35BFAP
74DT35BFAP
74ET35BFAP
74FT35BFAP
74GT35BFAP
74HT35BFAP
74JT35BFAP
74KT35BFAP
74LT35BFAP
74MT35BFAP
74NT35BFAP
74PT35BFAP
73QT35BFAP
73RT35BFAP
73ST35BFAP
73TT35BFAP
73WT35BFAP
5000.00
5200.00
5400.00
5900.00
6300.00
6900.00
7400.00
8500.00
9100.00
11200.00
12500.00
15800.00
17400.00
19300.00
6
2
3
4
74AT35DFAP
74BT35DFAP
74CT35DFAP
74DT35DFAP
74ET35DFAP
74FT35DFAP
74GT35DFAP
74HT35DFAP
74JT35DFAP
74KT35DFAP
74LT35DFAP
74MT35DFAP
74NT35DFAP
74PT35DFAP
73QT35DFAP
73RT35DFAP
73ST35DFAP
73TT35DFAP
73WT35DFAP
5000.00
5200.00
5300.00
5900.00
6200.00
6900.00
7400.00
8500.00
9200.00
11200.00
12500.00
15800.00
17500.00
19400.00
6
2
3
4
74AT350FAP
74BT350FAP
74CT350FAP
74DT350FAP
74ET350FAP
74FT350FAP
74GT350FAP
74HT350FAP
74JT350FAP
74KT350FAP
74LT350FAP
74MT350FAP
74NT350FAP
74PT350FAP
73QT350FAP
73RT350FAP
73ST350FAP
73TT350FAP
73WT350FAP
5000.00
5200.00
5300.00
5900.00
6200.00
6900.00
7300.00
8500.00
9200.00
11200.00
12500.00
15800.00
17400.00
19300.00
6
2
3
4
74AT35EFAP
74BT35EFAP
74CT35EFAP
74DT35EFAP
74ET35EFAP
74FT35EFAP
74GT35EFAP
74HT35EFAP
74JT35EFAP
74KT35EFAP
74LT35EFAP
74MT35EFAP
74NT35EFAP
74PT35EFAP
73QT35EFAP
73RT35EFAP
73ST35EFAP
73TT35EFAP
73WT35EFAP
5300.00
5600.00
5700.00
6200.00
6600.00
7300.00
7800.00
9000.00
9400.00
11800.00
13200.00
16600.00
18400.00
20300.00
6
2
3
4
74AT35WFAP 6000.00
74BT35WFAP 6200.00
74CT35WFAP 6300.00
74DT35WFAP 7500.00
74ET35WFAP 7800.00
74FT35WFAP 8100.00
74GT35WFAP 8600.00
74HT35WFAP 11800.00
74JT35WFAP 12100.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
16-174
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 5, 10, 15, 20, or 30
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Fusible disconnect
▪ Control circuit transformer
▪ Reset button
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
Enclosed Combination with Fusible Disconnect
MAX HP
Class 10 Light Duty
OPEN Style
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
7.5 7.5 15 — 12
3RW4422-1BC34 74AT3_BFAF
10 10 20 — 15
3RW4423-1BC34 74BT3_BFAF
10 15 25 — 19
3RW4424-1BC34 74CT3_BFAF
15 15 30 — 22
3RW4425-1BC34 74DT3_BFAF
20 25 50 — 37
3RW4426-1BC34 74ET3_BFAF
25 30 60 — 45
3RW4427-1BC34 74FT3_BFAF
30 30 75 — 56
3RW4434-6BC34 74GT3_BFAF
30 40 75 — 56
3RW4435-6BC34 74HT3_BFAF
40 50 100 — 75
3RW4436-6BC34 74JT3_BFAF
60 60 125 — 93
3RW4443-6BC34 74KT3_BFAF
60 75 150 — 112 3RW4444-6BC34 74LT3_BFAF
75 100 200 — 149 3RW4445-6BC34 74MT3_BFAF
100 125 250 — 186 3RW4446-6BC34 74NT3_BFAF
125 150 300 — 224 3RW4447-6BC34 74PT3_BFAF
150 200 400 — 298 3RW4453-6BC34 73QT_BFAF
150 200 450 — 336 3RW4454-6BC34 73RT_BFAF
200 250 500 — 373 3RW4455-6BC34 73ST_BFAF
200 250 550 —
3RW4456-6BC34 73TT_BFAF
200 250 600 — 447 3RW4457-6BC34 73WT_BFAF
KW
NEMA 3R
74AT3_DFAF
74BT3_DFAF
74CT3_DFAF
74DT3_DFAF
74ET3_DFAF
74FT3_DFAF
74GT3_DFAF
74HT3_DFAF
74JT3_DFAF
74KT3_DFAF
74LT3_DFAF
74MT3_DFAF
74NT3_DFAF
74PT3_DFAF
73QT_DFAF
73RT_DFAF
73ST_DFAF
73TT_DFAF
73WT_DFAF
List
Price $
4500.00
4800.00
5100.00
5400.00
5700.00
6400.00
6800.00
7600.00
8800.00
11000.00
11900.00
14900.00
16400.00
18100.00
NEMA 12
74AT3_0FAF
74BT3_0FAF
74CT3_0FAF
74DT3_0FAF
74ET3_0FAF
74FT3_0FAF
74GT3_0FAF
74HT3_0FAF
74JT3_0FAF
74KT3_0FAF
74LT3_0FAF
74MT3_0FAF
74NT3_0FAF
74PT3_0FAF
73QT_0FAF
73RT_0FAF
73ST_0FAF
73TT_0FAF
73WT_0FAF
List
Price $
4500.00
4800.00
5100.00
5400.00
5700.00
6400.00
6800.00
7600.00
8800.00
11000.00
11900.00
14900.00
16400.00
18000.00
NEMA 4
74AT3_EFAF
74BT3_EFAF
74CT3_EFAF
74DT3_EFAF
74ET3_EFAF
74FT3_EFAF
74GT3_EFAF
74HT3_EFAF
74JT3_EFAF
74KT3_EFAF
74LT3_EFAF
74MT3_EFAF
74NT3_EFAF
74PT3_EFAF
73QT_EFAF
73RT_EFAF
73ST_EFAF
73TT_EFAF
73WT_EFAF
List
Price $
4800.00
5100.00
5400.00
5700.00
6000.00
6800.00
7200.00
8000.00
9300.00
11600.00
12400.00
15700.00
17300.00
18900.00
NEMA 4/4X
Stainless Steel
74AT3_WFAF
74BT3_WFAF
74CT3_WFAF
74DT3_WFAF
74ET3_WFAF
74FT3_WFAF
74GT3_WFAF
74HT3_WFAF
74JT3_WFAF
List
Price $
5500.00
5800.00
6100.00
7000.00
7300.00
7700.00
8100.00
10800.00
11700.00
CONTROL
PRODUCTS
List
Price $
4600.00
4800.00
5100.00
5500.00
5700.00
6400.00
6800.00
7600.00
8800.00
11000.00
11900.00
14900.00
16400.00
18000.00
16
Rated
Operating
Current
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
AVAILABILITY TO BE ANNOUNCED
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
75
75
100
125
150
200
250
300
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
250
300
400
500
600
700
750
850
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6
2
3
4
74AT35BFAF
74BT35BFAF
74CT35BFAF
74DT35BFAF
74ET35BFAF
74FT35BFAF
74GT35BFAF
74HT35BFAF
74JT35BFAF
74KT35BFAF
74LT35BFAF
74MT35BFAF
74NT35BFAF
74PT35BFAF
73QT35BFAF
73RT35BFAF
73ST35BFAF
73TT35BFAF
73WT35BFAF
4800.00
5100.00
5500.00
5800.00
6200.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17800.00
19700.00
6
2
3
4
74AT35DFAF
74BT35DFAF
74CT35DFAF
74DT35DFAF
74ET35DFAF
74FT35DFAF
74GT35DFAF
74HT35DFAF
74JT35DFAF
74KT35DFAF
74LT35DFAF
74MT35DFAF
74NT35DFAF
74PT35DFAF
73QT35DFAF
73RT35DFAF
73ST35DFAF
73TT35DFAF
73WT35DFAF
4800.00
5100.00
5500.00
5800.00
6100.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17900.00
19800.00
6
2
3
4
74AT350FAF
74BT350FAF
74CT350FAF
74DT350FAF
74ET350FAF
74FT350FAF
74GT350FAF
74HT350FAF
74JT350FAF
74KT350FAF
74LT350FAF
74MT350FAF
74NT350FAF
74PT350FAF
73QT350FAF
73RT350FAF
73ST350FAF
73TT350FAF
73WT350FAF
4800.00
5100.00
5500.00
5800.00
6100.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17800.00
19700.00
6
2
3
4
74AT35EFAF
74BT35EFAF
74CT35EFAF
74DT35EFAF
74ET35EFAF
74FT35EFAF
74GT35EFAF
74HT35EFAF
74JT35EFAF
74KT35EFAF
74LT35EFAF
74MT35EFAF
74NT35EFAF
74PT35EFAF
73QT35EFAF
73RT35EFAF
73ST35EFAF
73TT35EFAF
73WT35EFAF
5100.00
5400.00
5800.00
6100.00
6500.00
7300.00
7800.00
8800.00
10100.00
12500.00
13600.00
17000.00
18700.00
20700.00
6
2
3
4
74AT35WFAF 5800.00
74BT35WFAF 6100.00
74CT35WFAF 6500.00
74DT35WFAF 7400.00
74ET35WFAF 7700.00
74FT35WFAF 8200.00
74GT35WFAF 8700.00
74HT35WFAF 11500.00
74JT35WFAF 12500.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
Discount Schedule IEC
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-175
Soft Starter
Control
26
32
42
51
68
82
100
117
145
180
215
280
315
385
494
551
615
693
780
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
Control Products
Enclosed 3RW44
Selection
Ordering Information
3RW44 Enclosed features:
▪ Available in NEMA 1, 12, 3R, 4, and 4
stainless steel
▪ Compact size
▪ Built-in bypass contactor
▪ Multiple starting/stopping techniques
including torque control
▪ Internal overload class 5, 10, 15, 20, or 30
▪ Built-in graphical LCD keypad
▪ Internal self protection
▪ Fault monitoring
▪ 3 parameter sets
▪ Communication capable via opt. Profibus
module
▪ Programmable inputs and outputs
▪ External keypad available
䊳
Enclosed devices should be ordered by
the FLA of the motor.
䊳
The 3RW44 is designed for normal
starting applications.
䊳
For factory modifications see page 16-177.
䊳
For complete derating and application info
see the 2006 Industrial Controls catalog
CPPC-06000-0106.
䊳
For dimensional drawings see page 16-178.
Class 74 non-combination starters include:
▪ NEMA rated enclosure
▪ 3RW44 Sirius softstarter with built-in OL
and bypass
▪ Fusible disconnect
▪ Control circuit transformer
▪ Reset button
Ideal applications for 3RW44 enclosed
softstarters:
▪ Fans
▪ Pumps
▪ Conveying systems and lifts
▪ Hydraulics
▪ Machine tools
▪ Mills saws
▪ Crushers and grinders
▪ Mixers
▪ HVAC systems
The 3RW44 severe duty rating table should
be applied for high inertia applications
such rock crushers, chippers, screw
compressors, ect.
Class 74 starters are built to UL and CSA
standards.
For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.
3RW44 For High Feature Applications
CONTROL
PRODUCTS
16
Enclosed Combination with Fusible Disconnect
Rated
Operating
Current
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
634
650
MAX HP
Class 20 Severe Duty (350% * Ie for 20s)
OPEN Style
List
200V 230V 460V 575V 380V (Starter Only)
NEMA 1
Price $
7.5 7.5 15 — 12
3RW4422-1BC34 74AT3_BFAF 4600.00
10 10 20 — 15
3RW4423-1BC34 74BT3_BFAF 4800.00
10 15 25 — 19
3RW4424-1BC34 74CT3_BFAF 5100.00
15 15 30 — 22
3RW4425-1BC34 74DT3_BFAF 5500.00
20 25 50 — 37
3RW4426-1BC34 74ET3_BFAF
5700.00
25 30 60 — 45
3RW4427-1BC34 74FT3_BFAF
6400.00
30 30 60 — 45
3RW4434-6BC34 74GT3_BFAF 6800.00
30 40 75 — 56
3RW4435-6BC34 74HT3_BFAF 7600.00
40 50 75 — 56
3RW4436-6BC34 74JT3_BFAF
8800.00
50 60 100 — 75
3RW4443-6BC34 74KT3_BFAF 11000.00
60 75 125 — 93
3RW4444-6BC34 74LT3_BFAF 11900.00
75 75 150 — 112 3RW4445-6BC34 74MT3_BFAF 14900.00
75 100 200 — 149 3RW4446-6BC34 74NT3_BFAF 16400.00
100 125 250 — 186 3RW4447-6BC34 74PT3_BFAF 18000.00
150 150 400 — 298 3RW4453-6BC34 73QT_BFAF
150 200 450 — 336 3RW4454-6BC34 73RT_BFAF
200 200 500 — 373 3RW4455-6BC34 73ST_BFAF
200 250 500 — 373 3RW4456-6BC34 73TT_BFAF
200 250 550 — 373 3RW4457-6BC34 73WT_BFAF
KW
NEMA 3R
74AT3_DFAF
74BT3_DFAF
74CT3_DFAF
74DT3_DFAF
74ET3_DFAF
74FT3_DFAF
74GT3_DFAF
74HT3_DFAF
74JT3_DFAF
74KT3_DFAF
74LT3_DFAF
74MT3_DFAF
74NT3_DFAF
74PT3_DFAF
73QT_DFAF
73RT_DFAF
73ST_DFAF
73TT_DFAF
73WT_DFAF
List
Price $
4500.00
4800.00
5100.00
5400.00
5700.00
6400.00
6800.00
7600.00
8800.00
11000.00
11900.00
14900.00
16400.00
18100.00
NEMA 12
74AT3_0FAF
74BT3_0FAF
74CT3_0FAF
74DT3_0FAF
74ET3_0FAF
74FT3_0FAF
74GT3_0FAF
74HT3_0FAF
74JT3_0FAF
74KT3_0FAF
74LT3_0FAF
74MT3_0FAF
74NT3_0FAF
74PT3_0FAF
73QT_0FAF
73RT_0FAF
73ST_0FAF
73TT_0FAF
73WT_0FAF
List
Price $
4500.00
4800.00
5100.00
5400.00
5700.00
6400.00
6800.00
7600.00
8800.00
11000.00
11900.00
14900.00
16400.00
18000.00
NEMA 4
74AT3_EFAF
74BT3_EFAF
74CT3_EFAF
74DT3_EFAF
74ET3_EFAF
74FT3_EFAF
74GT3_EFAF
74HT3_EFAF
74JT3_EFAF
74KT3_EFAF
74LT3_EFAF
74MT3_EFAF
74NT3_EFAF
74PT3_EFAF
73QT_EFAF
73RT_EFAF
73ST_EFAF
73TT_EFAF
73WT_EFAF
List
Price $
4800.00
5100.00
5400.00
5700.00
6000.00
6800.00
7200.00
8000.00
9300.00
11600.00
12400.00
15700.00
17300.00
18900.00
NEMA 4/4X
Stainless Steel
74AT3_WFAF
74BT3_WFAF
74CT3_WFAF
74DT3_WFAF
74ET3_WFAF
74FT3_WFAF
74GT3_WFAF
74HT3_WFAF
74JT3_WFAF
List
Price $
5500.00
5800.00
6100.00
7000.00
7300.00
7700.00
8100.00
10800.00
11700.00
Soft Starter
Control
AVAILABILITY TO BE ANNOUNCED
26
32
42
51
68
82
97
113
134
175
195
243
263
326
494
551
615
693
780
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
15
20
25
30
50
60
60
75
75
100
125
150
200
250
400
450
500
550
600
20
25
30
40
50
75
75
100
125
150
200
200
250
300
500
550
600
650
700
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200V
230V
380V
460V
3RW4422-1BC35
3RW4423-1BC35
3RW4424-1BC35
3RW4425-1BC35
3RW4426-1BC35
3RW4427-1BC35
3RW4434-6BC35
3RW4435-6BC35
3RW4436-6BC35
3RW4443-6BC35
3RW4444-6BC35
3RW4445-6BC35
3RW4446-6BC35
3RW4447-6BC35
3RW4453-6BC35
3RW4454-6BC35
3RW4455-6BC35
3RW4456-6BC35
3RW4457-6BC35
6
2
3
4
74AT35BFAF
74BT35BFAF
74CT35BFAF
74DT35BFAF
74ET35BFAF
74FT35BFAF
74GT35BFAF
74HT35BFAF
74JT35BFAF
74KT35BFAF
74LT35BFAF
74MT35BFAF
74NT35BFAF
74PT35BFAF
73QT35BFAF
73RT35BFAF
73ST35BFAF
73TT35BFAF
73WT35BFAF
4800.00
5100.00
5500.00
5800.00
6200.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17800.00
19700.00
6
2
3
4
74AT35DFAF
74BT35DFAF
74CT35DFAF
74DT35DFAF
74ET35DFAF
74FT35DFAF
74GT35DFAF
74HT35DFAF
74JT35DFAF
74KT35DFAF
74LT35DFAF
74MT35DFAF
74NT35DFAF
74PT35DFAF
73QT35DFAF
73RT35DFAF
73ST35DFAF
73TT35DFAF
73WT35DFAF
4800.00
5100.00
5500.00
5800.00
6100.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17900.00
19800.00
6
2
3
4
74AT350FAF
74BT350FAF
74CT350FAF
74DT350FAF
74ET350FAF
74FT350FAF
74GT350FAF
74HT350FAF
74JT350FAF
74KT350FAF
74LT350FAF
74MT350FAF
74NT350FAF
74PT350FAF
73QT350FAF
73RT350FAF
73ST350FAF
73TT350FAF
73WT350FAF
4800.00
5100.00
5500.00
5800.00
6100.00
6900.00
7400.00
8200.00
9600.00
11900.00
12900.00
16100.00
17800.00
19700.00
6
2
3
4
74AT35EFAF
74BT35EFAF
74CT35EFAF
74DT35EFAF
74ET35EFAF
74FT35EFAF
74GT35EFAF
74HT35EFAF
74JT35EFAF
74KT35EFAF
74LT35EFAF
74MT35EFAF
74NT35EFAF
74PT35EFAF
73QT35EFAF
73RT35EFAF
73ST35EFAF
73TT35EFAF
73WT35EFAF
5100.00
5400.00
5800.00
6100.00
6500.00
7300.00
7800.00
8800.00
10100.00
12500.00
13600.00
17000.00
18700.00
20700.00
6
2
3
4
74AT35WFAF 5800.00
74BT35WFAF 6100.00
74CT35WFAF 6500.00
74DT35WFAF 7400.00
74ET35WFAF 7700.00
74FT35WFAF 8200.00
74GT35WFAF 8700.00
74HT35WFAF 11500.00
74JT35WFAF 12500.00
AVAILABILITY TO BE ANNOUNCED
Starter
size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.
HPs are for reference only. Enclosed ratings are at 40°C.
16-176
Starter
selection is dependent on type of application. Ie = FLA rating of motor.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule IEC
Control Products
Factory Modifications
Selection
Available modifications in STANDARD enclosure
Pilot Devices
Push Buttons
Start/Stop
Selector Switches
Hand-Off-Auto
Hand-Off-Auto (keyed)
Off-On
Pilot Light
Red ‘On’
Green ‘On’
Red ‘Run’
Green ‘Run’
Red ‘Off’
Green ‘Off’
Amber ‘Fault’
White ‘Control Power On’
Red ‘On’ Push-to-Test
Green ‘On’ Push-to-Test
Green ‘Off’ Push-to-Test
Custom pilot light (state color and nameplate text)
Through the Door Metering
External keypad for 3RW44
Elapse time meter
Control Options
Profibus Communication Module (installed-connection
cable not supplied
Ground Lug - 1 Conductor
Alarm Package - Includes horn, light, relay & push button
Electronic 8 function timing relay (.05s - 100h)
supplied mounted and unwired
3RW40/44
73/74
ALL
A1
260.
3RW40/44
3RW40/44
3RW40/44
73/74
73/74
73/74
ALL
ALL
ALL
A3
S3
A4
260.
390.
260.
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
73/74
73/74
73/74
73/74
73/74
73/74
73/74
73/74
73/74
73/74
73/74
73/74
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
FA
FB
FC
FD
FJ
FK
FL
FW
FS
FT
FU
FZ
250.
250.
250.
250.
250.
250.
250.
250.
360.
360.
360.
300.
3RW44
3RW40/44
73/74
N1, N12
N1, N12 (120V)
K1
M5
1100.
300.
3RW44
73/74
ALL
P1
1000.
3RW40/44
3RW40/44
73/74
73/74
ALL
N1, N3, N12
L10
M7
100.
500.
3RW40/44
73/74
ALL
TR
400.
R04
R22
R40
L6
N3
N1
TC3
TC6
TC9
TC12
300.
300.
300.
500.
100.
100.
150.
150.
150.
150.
Control Relay supplied mounted and unwired (4-pole max) 3RW40/44
73/74
ALL
Circuit Breaker Shunt Trip (included std in 3RW40 versions)
Service Entrance Labeled
Function identification plate, with marking as specified
Terminal Block 3 point
Terminal Block 6 point
Terminal Block 9 point
Terminal Block 12 point
74
74
73/74
73/74
73/74
73/74
73/74
ALL
ALL
ALL
ALL
ALL
ALL
ALL
3RW44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
3RW40/44
CONTROL
PRODUCTS
Enclosed Style
Mod Suffix
List Price
Adder $
16
3RW Version
Enclosure NEMA
Type
Modification
Options Requiring the Modified Options Box Size
Modification
MODIFIED BOX ADDER (change 8th character to a ‘G’)
3RW Version
3RW40
3RW44
Enclosed Enclosed
Mod
Style
NEMA Type Suffix List Price Adder $
117 – 285 315
A–D
E
N1/12/3R/4
800.
800.
73
N4SS
2600.
2600.
N1/12/3R/4
800.
0
74
N4SS
—
2600.
26 – 51
68
A–D
E
N1/12/3R/4
300.
1000.
73
N4SS
900.
3400.
N1/12/3R/4
1100.
1000.
74
N4SS
3000.
2600.
385
F
0
500.
0
—
82 – 117
F–H
1000.
2600.
800.
2500.
145 – 215 280 – 385
J–L
M–P
1000.
0
2500.
0
500.
0
—
600.
117
A
145 – 205 248
B, C
D
315 – 385
E, F
Mod Box Options
3RW40 current size
(3rd character)
(3rd character)
Contactor Options
Isolation contactor
3RW40/44
Emergency HP Rated Bypass Starter
3RW40
*Includes keyed selector switch to select
3RW44
between soft start and across the line start
Extra Capacity CPT
100 VA Extra
Control Options
Space Heater (120V separate control)
Space Heater with Thermostat (120V
separate control)
Lightning Arrestor
Limited
to N4SS offering.
Discount Schedule IEC
3RW40/44
26 – 42
A, B, C
51 – 68
D, E
82 – 117
F, G, H
145 – 215 280
J, K, L
M
315 – 385
N, P
73/74
73/74
N1/12/3R/4
N1/12/3R/4
IC
A12
700.
1200.
1700.
3500.
1800.
5000.
2600.
6600.
4300.
10000.
73/74
N1/12/3R/4
A12
1300.
1600.
1900.
3200.
4100.
5800.
73/74
ALL
CA
600.
600.
600.
600.
600.
600.
3RW40/44
73/74
ALL
SH
300.
3RW40/44
73/74
ALL
ST
500.
3RW40/44
73/74
ALL
L
600.
An
isolation contactor is included for 3RW40.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-177
Soft Starter
Control
3RW44 current size
Control Products
Class 73, 74
Dimensions
Dimensions are in inches and are for reference only (not for construction). Certain styles may deviate from values indicated.
Non-Combination Class 73
Combination Type Class 74
N1, N12, N4 Standard Enclosure
CONTROL
PRODUCTS
16
3RW40
3RW44
Amps
117-145
205-315
385
26-68
82-117
145-215
280-385
A
36
36
54
26
36
36
54
N1, N12, N4 Standard Enclosure
B
18
22
36
12.5
18
22
36
C
15
20
20
15
15
20
20
3RW44
N4 Stainless Steel Standard Enclosure
3RW40
3RW44
Amps
117
145-205
248-385
26-51
68-82
100-117
145-385
A
36
36
54
26
36
36
54
B
18
22
36
12.5
18
22
36
C
15
20
20
15
15
20
20
B
36
22
36
C
20
20
20
N1, N12, N4 Modified Enclosure
3RW40
3RW44
Soft Starter
Control
3RW40
Amps
117-385
26-51
68-385
A
56
36
54
N4 Stainless Steel Modified Enclosure
3RW40
3RW44
Amps
117-385
26-51
68-385
A
54
36
54
B
36
22
36
C
20
20
20
A
50
66
90
90
36
50
66
90
90
B
25
25
30
40
23
25
25
30
40
C
20
20
20
20
15
20
20
20
20
N4 Stainless Steel Standard Enclosure
3RW40
3RW44
Amps
117-145
205-300
26-42
51-100
117-145
180-385
A
54
90
36
50
54
90
B
36
40
23
25
36
40
C
20
20
15
20
20
20
B
30
30
40
30
30
40
C
20
20
20
20
20
20
N1, N12, N4 Modified Enclosure
3RW40
3RW44
Amps
117-248
315
385
26-215
280
315-385
A
76
90
90
76
90
90
N4 Stainless Steel Modified Enclosure
3RW40
3RW44
16-178
Amps
117-145
145-205
248-315
385
26-68
82-117
145-215
280
315-384
Amps
117-145
26-145
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
A
76
76
B
30
30
C
20
20
Control Products
Class 73, 74
Wiring Diagrams
16
CONTROL
PRODUCTS
Soft Starter
Control
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-179
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
Features
•
Snap In Legend Inserts
•
Flush and Surface Mounted Types
•
Convertible Selector
•
Double Break Contacts
•
Dual Voltage Pilot Light with Snap In Lens
•
Conversion Kits
•
UL Listed File #E22655
•
CSA Certified File #LR6535
Application
Standard duty control stations are used with
magnetic controllers to control the starting,
stopping, reversing or speed of applicable
motors.
Padlock Attachment Kit
50ZAL can be mounted to any Type 1 surface mounted station by the lower screw
which fastens the cover to the station base.
Made of heavy steel, chrome plated, the attachment provides for the padlocking of a
push button in the depressed position or a
selector switch in any position. When used
with a push button operator, raised Legend
Insert D53493003 (Red Stop) must be used.
Pendant Bracket
Adapts standard Type 1 surface mounted
stations for suspension from a cable or
chain. Bracket 50ZAP2 is used for one and
two unit stations, 50ZAP3 for three unit stations.
General
Electrical Ratings
NEMA AC Ratings 50/60Hz
Nema B600 5 Continuous Amps
Volts
120
240
480
600
VA
Make
30
15
7.5
6
3600
Break
3
1.5
0.75
0.6
360
Ordering Information
•
Legend Inserts see page 16-187.
•
Accessories see page 16-187.
Stations are assembled of one, two or three
push button, selector switch or pilot light
units in a variety of combinations to provide
compact control units for remote control of
magnetic starters and contactors.
CONTROL
PRODUCTS
16
Station enclosures are available in Type 1
surface mounted, 1B flush plate mounted
and 4 watertight.
Features
Type 1 surface mounted bases are constructed of 14 gauge sheet steel, primed
and finished in baked gray enamel. The
base is predrilled to receive a variety of contact blocks, pilot lights and accessory devices. Covers are of 20 gauge sheet steel,
wrap- around construction, primed and finished in baked gray enamel. Furnas Type 4
watertight heavy duty push button stations
are supplied with a provision to padlock the
stop button in the depressed position. Enclosures are predrilled and tapped for 3/4" conduit.
Contact blocks have double break, fine silver contacts with a NEMA B600 rating. Type
4 stations have a NEMA A600 rating.
The pilot light assembly is dual voltage with
clearly marked pressure type terminals for
120 volt or 240 volt connection.
The lens of the pilot light snaps into the
cover and is available in both red and green.
Push buttons are equipped with an operator
into which a selected legend insert is
snapped. Legend inserts are molded thermoplastic and come in a wide variety of legends and colors.
The selector switch operator can be instantly
set for two or three positions at any time.
2 Push Buttons
Surface Mounting, NEMA 1
2 Push Buttons
Flush Mounting, NEMA 1B
Pilot Devices
Mushroom Head
50ZMH mounts on any standard push button
operator. The Mushroom Head is red molded
thermoplastic, 1 1/2" in diameter, and provides a large operator for emergency stop or
similar applications.
Mechanical Interlock
50ZAM is a base mounted zinc plate, dichromate dipped, steel assembly. When
mounted in conjunction with Duplex Contact
Block 50ZAC3 (one NO and one NO) the interlock prevents one contact from being
closed while the other contact is closed.
16-180
1 Push Button
Surface Mounting
1 Selector Switch
Flush Mounting
2 Push Buttons
1 Selector Switch
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1 Pilot Light
2 Push Buttons
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
5A 600V AC NEMA B600
Selection and ordering data
Degree of
protection
Operator identification
1 unit surface
mount-momentary
pushbutton
Order No. List
Price $
1 unit
Packs
Unit
1NO - 1NC with common
jumper (50ZAC1)
1
50AA3D
49.00
1
NEMA 1
1NO - 1NC with common
jumper (50ZAC1)
1
50AA3E
49.00
1
A = Momentary raised pushbutton red, sur- NEMA 1
face, label "STOP"
1NO - 1NC with common
jumper (50ZAC1)
1
50AA3F
49.00
1
NEMA 1
1NO - 1NC with common
jumper (50ZAC1)
1
50AA3G
58.00
1
A = Momentary flush pushbutton less insert, NEMA 1
surface
1NO - 1NC with common
jumper (50ZAC1)
1
50AA3A
47.00
1
A = Momentary flush pushbutton red, surface, label "STOP"
NEMA 1
2 NO 2SPST (50ZAC8)
1
50AA3C3
49.00
1
A = 3 position selector switch, surface,
label "Off-On"
NEMA 1
2 NO 2SPST (50ZAC8)
1
50AA3C6
49.00
1
A = 2/3 selector switch, surface, multiple
legends
NEMA 1
2 NO 2SPST (50ZAC8)
1
50AA3B9
49.00
1
A = Indicator light, red, surface
NEMA 1
120/240V dual voltage
120PSB lamp
1
50BA3Y
115.00
1
A = Indicator light, green, surface
NEMA 1
120/240V dual voltage
120PSB lamp
1
50BA3Z
115.00
1
A = Indicator light, less lens, surface
NEMA 1
120/240V dual voltage
120PSB lamp
1
50BA32
109.00
1
A = Momentary flush pushbutton green,
flush, label "START"
NEMA 1B
1NO - 1NC with common
jumper (50ZAC1)
1
50AA2D
62.00
1
A = Momentary flush pushbutton red,
flush, label "STOP"
NEMA 1B
1NO - 1NC with common
jumper (50ZAC1)
1
50AA2E
62.00
1
A = Momentary raised pushbutton red,
flush, label "STOP"
NEMA 1B
1NO - 1NC with common
jumper (50ZAC1)
1
50AA2F
62.00
1
A = Momentary flush pushbutton less insert, NEMA 1B
flush
1NO - 1NC with common
jumper (50ZAC1)
1
50AA2A
60.00
1
A = Momentary flush pushbutton less insert, NEMA 1B
flush, chrome plate
1NO - 1NC with common
jumper (50ZAC1)
1
50AA6A
66.00
1
NEMA 1B
2 NO 2SPST (50ZAC8)
1
50AA2C3
62.00
1
A = 3 position selector switch, flush,
label "Off-On"
NEMA 1B
2 NO 2SPST (50ZAC8)
1
50AA2C6
62.00
1
A = 2/3 selector switch, multiple legends,
flush
NEMA 1B
2 NO 2SPST (50ZAC8)
1
50AA2B9
62.00
1
A = 2/3 selector switch, multiple legends,
chrome plate, flush
NEMA 1B
2 NO 2SPST (50ZAC8)
1
50AA6B9
68.00
1
A = Indicator light, red, flush
NEMA 1B
120/240V dual voltage
1
50BA2Y
127.00
1
A = Indicator light, green, flush
NEMA 1B
120/240V dual voltage
1
50BA2Z
127.00
1
A = Indicator light, less lens, flush
NEMA 1B
120/240V dual voltage
1
50BA22
121.20
1
A = Indicator light, less lens, chrome plate,
flush
NEMA 1B
120PSB lamp
1
50BA62
127.00
1
B = Momentary pushbutton green, surface, NEMA 1
label "START"
A = Momentary pushbutton red, surface,
label "STOP"
1NO, 1NC (50ZAC2)
2
50CA3DE
49.00
1
B = Momentary pushbutton green, surface, NEMA 1
label "START"
A = Momentary raised pushbutton red, surface, label "STOP"
1NO, 1NC (50ZAC2)
2
50CA3DF
49.00
1
B = Momentary pushbutton green, surface, NEMA 1
label "START"
A = Momentary mushroom head pushbutton
red, surface, label "STOP"
1NO, 1NC (50ZAC2)
2
50CA3DG
64.00
1
B = Momentary pushbutton, less insert,
surface
A = Momentary pushbutton, less insert,
surface
NEMA 1
1NO, 1NC (50ZAC2)
2
50CA3AA
45.00
1
B = Momentary pushbutton, surface,
label "FORWARD"
A = Momentary pushbutton, surface,
label "REVERSE"
NEMA 1
2 NO (50ZAC3)
2
50DA3KL
49.00
1
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Pilot Devices
A = 3 position selector switch, flush,
label "HAND-OFF-AUTO"
CONTROL
PRODUCTS
A = 3 position selector switch, surface,
label "HAND-OFF-AUTO"
16
2 unit surface
mount-momentary
pushbutton
Number of
command
points
A = Momentary flush pushbutton green, sur- NEMA 1
face, label "START"
A = Momentary mushroom head red, surface, label "STOP"
1 unit flush mountmomentary pushbutton
Contacts / voltage
16-181
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
5A 600V AC NEMA B600
Selection and ordering data
16
CONTROL
PRODUCTS
Pilot Devices
2 unit flush mountmomentary pushbutton
16-182
Order No. List
Price $
Pack
Degree of
protection
Contacts / voltage
B = Momentary pushbutton, surface,
label "OPEN"
A = Momentary pushbutton, surface,
label "CLOSE"
NEMA 1
2 NO (50ZAC3)
2
50DA3HJ
49.00
1
B = Momentary pushbutton, surface,
label "UP"
A = Momentary pushbutton, surface,
label "DOWN"
NEMA 1
2 NO (50ZAC3)
2
50DA3NP
49.00
1
B = Momentary pushbutton, surface,
less insert
A = Momentary pushbutton, surface,
less insert
NEMA 1
2 NO (50ZAC3)
2
50DA3AA
45.00
1
B = Momentary pushbutton, surface,
label "FORWARD"
A = Momentary pushbutton, surface,
label "REVERSE"
NEMA 1
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA3KL
52.00
1
B = Momentary pushbutton, surface,
label "OPEN"
A = Momentary pushbutton, surface,
label "CLOSE"
NEMA 1
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA3HJ
62.00
1
B = Momentary pushbutton, surface,
label "UP"
A = Momentary pushbutton, surface,
label "DOWN"
NEMA 1
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA3NP
62.00
1
B = Momentary pushbutton, surface,
label "ON"
A = Momentary pushbutton, surface,
label "OFF"
NEMA 1
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA334
62.00
1
B = Momentary pushbutton, less insert
surface
A = Momentary pushbutton, less insert,
surface
NEMA 1
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA3AA
58.00
1
B = Momentary pushbutton, surface,
label "FORWARD"
A = Momentary pushbutton, surface,
label "REVERSE"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
2
50EA3KL
73.00
1
B = Momentary pushbutton, surface,
label "OPEN"
A = Momentary pushbutton, surface,
label "CLOSE"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
2
50EA3HJ
73.00
1
B = Momentary pushbutton, surface,
label "UP"
A = Momentary pushbutton, surface,
label "DOWN"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
2
50EA3NP
73.00
1
B = Momentary pushbutton, surface,
label "ON"
A = Momentary pushbutton, surface,
label "OFF"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
2
50EA334
73.00
1
B = Momentary pushbutton, surface,
less insert
A = Momentary pushbutton, surface,
less insert
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
2
50EA3AA
69.00
1
B = Momentary pushbutton green, flush,
label "START"
A = Momentary pushbutton red, flush,
label "STOP"
NEMA 1B
1NO, 1NC (50ZAC2)
2
50CA2DE
62.00
1
NEMA 1B
B = Momentary pushbutton green, flush,
label "START"
A = Momentary raised pushbutton red, flush,
label "STOP"
1NO, 1NC (50ZAC2)
2
50CA2DF
62.00
1
NEMA 1B
B = Momentary pushbutton green, flush,
label "START"
A = Momentary mushroom head pushbutton
red, flush, label "STOP"
1NO, 1NC (50ZAC2)
2
50CA2AA
58.00
1
B = Momentary pushbutton, less insert, flush NEMA 1B
A = Momentary pushbutton, less insert, flush
1NO, 1NC (50ZAC2)
2
50CA6AA
64.00
1
Operator identification
2 unit surface
mount-momentary
pushbutton
Number
of command
points
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
1 unit
Unit
Discount Schedule PILO
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
5A 600V AC NEMA B600
Selection and ordering data
Order No. List
Price $
Packs
Degree of
protection
Contacts / voltage
B = Momentary pushbutton, flush,
label "FORWARD"
A = Momentary pushbutton, flush,
label "REVERSE"
NEMA 1B
2 NO (50ZAC3)
2
50DA2KL
62.00
1
B = Momentary pushbutton, flush,
label "OPEN"
A = Momentary pushbutton, flush,
label "CLOSE"
NEMA 1B
2 NO (50ZAC3)
2
50DA2HJ
62.00
1
B = Momentary pushbutton, flush,
label "UP"
A = Momentary pushbutton, flush,
label "DOWN"
NEMA 1B
2 NO (50ZAC3)
2
50DA2NP
62.00
1
B = Momentary pushbutton, less insert, flush NEMA 1B
A = Momentary pushbutton, less insert, flush
2 NO (50ZAC3)
2
50DA2AA
58.00
1
B = Momentary pushbutton, less insert,
chrome plate, flush
A = Momentary pushbutton, less insert,
chrome plate, flush
NEMA 1B
2 NO (50ZAC3)
2
50DA6AA
62.00
1
B = Momentary pushbutton, flush,
label "FORWARD"
A = Momentary pushbutton, flush,
label "REVERSE"
NEMA 1B
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA2KL
73.00
1
B = Momentary pushbutton, flush,
label "OPEN"
A = Momentary pushbutton, flush,
label "CLOSE"
NEMA 1B
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA2HJ
73.00
1
B = Momentary pushbutton, flush,
label "UP"
A = Momentary pushbutton, flush,
label "DOWN"
NEMA 1B
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA2NP
73.00
1
B = Momentary pushbutton, flush,
label "ON"
A = Momentary pushbutton, flush,
label "OFF"
NEMA 1B
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA234
73.00
1
B = Momentary pushbutton, less insert, flush NEMA 1B
A = Momentary pushbutton, less insert, flush
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA2AA
69.00
1
B = Momentary pushbutton, less insert,
chrome plate, flush
A = Momentary pushbutton, less insert,
chrome plate, flush
NEMA 1B
2 NO mechanically interlocked (50ZA3C w/ 50ZAM)
2
50RA6AA
76.00
1
B = Momentary pushbutton, flush,
label "FORWARD"
A = Momentary pushbutton, flush,
label "REVERSE"
NEMA 1B
2 NO, 2 NC (2 - 50ZAC2)
2
50EA2KL
86.00
1
B = Momentary pushbutton, flush,
label "OPEN"
A = Momentary pushbutton, flush,
label "CLOSE"
NEMA 1B
2 NO, 2 NC (2 - 50ZAC2)
2
50EA2HJ
86.00
1
B = Momentary pushbutton, flush,
label "UP"
A = Momentary pushbutton, flush,
label "DOWN"
NEMA 1B
2 NO, 2 NC (2 - 50ZAC2)
2
50EA2NP
86.00
1
B = Momentary pushbutton, flush,
label "ON"
A = Momentary pushbutton, flush,
label "OFF"
NEMA 1B
2 NO, 2 NC (2 - 50ZAC2)
2
50EA234
86.00
1
B = Momentary pushbutton, less insert, flush NEMA 1B
A = Momentary pushbutton, less insert, flush
2 NO, 2 NC (2 - 50ZAC2)
2
50EA2AA
82.00
1
NEMA 1B
2 NO, 2 NC (2 - 50ZAC2)
2
50EA6AA
88.00
1
Operator identification
2 unit flush mountmomentary pushbutton
Number
of command
points
Pilot Devices
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
CONTROL
PRODUCTS
Discount Schedule PILO
Unit
16
B = Momentary pushbutton, less insert,
chrome plate, flush
A = Momentary pushbutton, less insert,
chrome plate, flush
1 unit
16-183
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
5A 600V AC NEMA B600
Selection and ordering data
Operator identification
2 unit surface
mount-momentary
pushbutton
Degree of
protection
B = Momentary pushbutton green, surface, NEMA 1
label "START"
A = Maintained selector switch, surface,
label "HAND-OFF-AUTO"
1NO, 1NC (50ZAC1)
B = Momentary pushbutton less insert, sur- NEMA 1
face
A = Maintained selector switch, multiple legends, surface
1NO, 1NC (50ZAC1)
16
CONTROL
PRODUCTS
2
50FA3DC3
1 unit
73.00
Unit
1
2
50FA3AB9
73.00
1
2 NO 2SPDT w/ common
jumper (50ZAC8)
2 NO 2SPDT w/ common
jumper (50ZAC8)
50HA3YC3
180.00
1
NEMA 1
120/240V dual voltage
(120PSB lamp)
2 NO 2SPDT w/ common
jumper (50ZAC8)
2
50HA32B9
180.00
1
B = Indicator light, green, surface
A = Indicator light, red, surface
NEMA 1
120/240V dual voltage
(120PSB lamp)
2
50GA3ZY
180.00
1
B = Indicator light, less lens, surface
A = Indicator light, less lens, surface
NEMA 1
120/240V dual voltage
(120PSB lamp)
2
50GA322
168.00
1
B = Momentary pushbutton green, flush,
label "START"
A = Maintained selector switch, flush, label
"HAND-OFF-AUTO"
NEMA 1B
1NO, 1NC (50ZAC1)
2
50FA2DC3
86.00
1
2
50FA2AB9
84.00
1
2
50FA6AB9
91.00
1
A = Maintained selector switch, multiple legends, surface
Pilot Devices
Pack
2
B = Indicator light, red, surface
16-184
List
Price $
120/240V dual voltage
(120PSB lamp)
2 NO 2SPDT w/ common
jumper (50ZAC8)
A = Maintained selector switch, surface,
label "HAND-OFF-AUTO"
3 unit surface
mount
Order No.
NEMA 1
B = Indicator light, red, surface
2 unit flush mountmomentary pushbutton
Contacts / voltage
Number
of command
points
2 NO 2SPDT w/ common
jumper (50ZAC8)
B = Momentary pushbutton less insert, flush NEMA 1B
A = Maintained selector switch, multiple legends, flush
1NO, 1NC (50ZAC1)
B = Momentary pushbutton less insert
chrome plate, flush
A = Maintained selector switch, multiple
legends, flush
NEMA 1B
1NO, 1NC (50ZAC1)
B = Indicator light, red, flush
A = Maintained selector switch, flush, label
"HAND-OFF-AUTO"
NEMA 1B
120/240V dual voltage
(120PSB lamp)
2 NO 2SPDT w/ common
jumper (50ZAC8)
2
50HA2YC3
189.00
1
NEMA 1B
B = Indicator light, less lens, flush
A = Maintained selector switch, multiple legends, flush
120/240V dual voltage
(120PSB lamp)
2 NO 2SPDT w/ common
jumper (50ZAC8)
2
50HA22B9
189.00
1
B = Indicator light, less lens, chrome plate, NEMA 1B
flush
A = Maintained selector switch, multiple legends, flush
120/240V dual voltage
(120PSB lamp)
2 NO 2SPDT w/ common
jumper (50ZAC8)
2
50HA62B9
189.00
1
2 NO 2SPDT w/ common
jumper (50ZAC8)
2 NO 2SPDT w/ common
jumper (50ZAC8)
B = Indicator light, green, flush
A = Indicator light, red, flush
NEMA 1B
120/240V dual voltage
(120PSB lamp)
2
50GA2ZY
182.00
1
B = Indicator light, less lens, flush
A = Indicator light, less lens, flush
NEMA 1B
120/240V dual voltage
(120PSB lamp)
2
50GA222
176.00
1
B = Indicator light, less lens, chrome plate,
flush
A = Indicator light, less lens, chrome plate,
flush
NEMA 1B
120/240V dual voltage
(120PSB lamp)
2
50GA622
182.00
1
C = Momentary pushbutton, surface, label
"FORWARD"
B = Momentary pushbutton, surface, label
"REVERSE"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3KLE
98.00
1
C = Momentary pushbutton, surface, label
"UP"
B = Momentary pushbutton, surface, label
"DOWN"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3NPE
98.00
1
C = Momentary pushbutton, surface, label
"OPEN"
B = Momentary pushbutton, surface, label
"CLOSE"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3HJE
98.00
1
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
5A 600V AC NEMA B600
Selection and ordering data
Order No.
List
Price $
Pack
1 unit
Unit
Degree of
protection
Contacts / voltage
C = Momentary pushbutton, surface, label
"FAST"
B = Momentary pushbutton, surface, label
"SLOW"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3TUE
98.00
1
C = Momentary pushbutton, surface, label
"START"
B = Momentary pushbutton, surface, label
"JOG"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3DME
98.00
1
C = Momentary pushbutton, surface, label
less insert
B = Momentary pushbutton, surface, label
less insert
A = Momentary pushbutton, surface. label
less insert
NEMA 1
2 NO, 2 NC (2 - 50ZAC2)
1NO - 1NC with common
jumper (50ZAC1)
3
50MA3AAA
92.00
1
C = Momentary pushbutton, surface, label
"START"
B = Momentary pushbutton, surface, label
"STOP"
A = Maintained selector switch, surface,
label "HAND-OFF-AUTO"
NEMA 1
1 NO, 1 NC (50ZAC2)
2 NO, 2 SPST with common
jumper (50ZAC8)
3
50LA3DEC3
148.00
1
C = Momentary pushbutton, less insert, sur- NEMA 1
face
B = Momentary pushbutton, less insert, surface
A = Maintained selector switch, multiple legends, surface
1 NO, 1 NC (50ZAC2)
2 NO, 2 SPST with common
jumper (50ZAC8)
3
50LA3AAB9
144.00
1
Operator identification
3 unit surface
mount
Number
of command
points
NEMA 1
120/240V dual voltage
(120PSB lamp)
1 NO, 1 NC (50ZAC2)
3
50JA3YDE
180.00
1
C = Indicator light, green, surface
B = Momentary pushbutton, surface, label
"START"
A = Momentary pushbutton, surface, label
"STOP"
NEMA 1
120/240V dual voltage
(120PSB lamp)
1 NO, 1 NC (50ZAC2)
3
50JA3ZDE
180.00
1
NEMA 1
C = Indicator light, less lens, surface
B = Momentary pushbutton, less insert, surface
A = Momentary pushbutton, less insert, surface
120/240V dual voltage
(120PSB lamp)
1 NO, 1 NC (50ZAC2)
3
50JA32AA
170.00
1
NEMA 1
120/240V dual voltage
(120PSB lamp)
2 NO, 2 SPST with common
jumper (50ZAC8)
3
50NA3ZYC3
230.00
1
NEMA 1
C = Indicator light, less lens, surface
B = Indicator light, less lens, surface
A = Maintained selector switch, multiple legends, surface
120/240V dual voltage
(120PSB lamp)
2 NO, 2 SPST with common
jumper (50ZAC8)
3
50NA322B9
218.00
1
CONTROL
PRODUCTS
C = Indicator light, green, surface
B = Indicator light, red, surface
A = Maintained selector switch, surface,
label "HAND-OFF-AUTO"
16
C = Indicator light, red, surface
B = Momentary pushbutton, surface, label
"START"
A = Momentary pushbutton, surface, label
"STOP"
Pilot Devices
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-185
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
Heavy Duty - 10A 600V NEMA B600
Selection and ordering data
16
CONTROL
PRODUCTS
Pilot Devices
16-186
Order No.
List
Price $
Pack
1 unit
Unit
Degree of
protection
Contacts / voltage
A = Momentary pushbutton, surface,
label "START" – Green
NEMA 4
1NO - 1NC
1
50HA1E1
213.00
1
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
1NO - 1NC
1
50HA1E2
213.00
1
A = Momentary pushbutton, surface,
label "RESET" – Green
NEMA 4
1NO - 1NC
1
50HA1E4
213.00
1
A = Momentary pushbutton, surface, label
"JOG" – Green
A = Maintained selector switch, surface,
label "SAFE-RUN"
A = Maintained selector switch, surface,
label "OFF-ON"
A = Maintained selector switch, surface,
label "JOG-RUN" – Green
NEMA 4
1NO - 1NC
1
50HA1E5
213.00
1
NEMA 4
1NO - 1NC
1
50HA1E6
222.00
1
NEMA 4
1NO - 1NC
1
50HA1E7
222.00
1
NEMA 4
1NO - 1NC
1
50HA1E8
222.00
1
A = Maintained selector switch, surface,
label "HAND-OFF-AUTO"
B = Momentary pushbutton, surface,
label "START" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
1NO - 1NC
1
50HA1E9
222.00
1
NEMA 4
1NO - 1NC
2
50HA2E1
301.00
1
B = Momentary pushbutton, surface,
label "FORWARD" – Green
A = Momentary pushbutton, surface,
label "REVERSE" – Red
NEMA 4
2
50HA2E2
301.00
1
B = Momentary pushbutton,P surface,
label "UP" – Green
A = Momentary pushbutton, surface,
label "DOWN" – Red
NEMA 4
2
50HA2E3
301.00
1
B = Momentary pushbutton, surface,
label "OPEN" – Green
A = Momentary pushbutton, surface,
label "CLOSE" – Red
NEMA 4
2
50HA2E4
301.00
1
B = Momentary pushbutton, surface,
label "FAST" – Green
A = Momentary pushbutton, surface,
label "SLOW" – Red
NEMA 4
2
50HA2E5
301.00
1
C = Momentary pushbutton, surface,
label "FORWARD" – Green
B = Momentary pushbutton, surface,
label "REVERSE" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
3
50HA3E1
395.00
1
C = Momentary pushbutton, surface,
label "UP" – Green
B = Momentary pushbutton, surface,
label "DOWN" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
3
50HA3E2
395.00
1
C = Momentary pushbutton, surface,
label "OPEN" – Green
B = Momentary pushbutton, surface,
label "CLOSE" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
3
50HA3E3
395.00
1
C = Momentary pushbutton, surface,
label "START" – Green
B = Momentary pushbutton, surface,
label "JOG" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
3
50HA3E9
395.00
1
C = Momentary pushbutton, surface,
label "FAST" – Green
B = Momentary pushbutton, surface,
label "SLOW" – Green
A = Momentary pushbutton, surface,
label "STOP" – Red
NEMA 4
3
50HA3E4
395.00
1
Operator identification
Art to Come
Number
of command
points
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
1NO - 1NC
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
Standard Duty Station Accessories
Selection and ordering data
Legend inscription insert for snap-on mounting
Inscription
Color
Order No.
Close
Down
Fast
Forward
High
Hoist
Jog
Low
Lower
Off
On
Open
Reverse
Slow
Start
Stop
Stop (raised)
Up
Orange
Orange
Black
Green
Black
Green
Black
Black
Orange
Red
Green
Green
Orange
Black
Green
Red
Red
Green
50D53493005
50D53493010
50D53493013
50D53493006
50D53493015
50D53493011
50D53493008
50D53493016
50D53493012
50D53493018
50D53493017
50D53493004
50D53493007
50D53493014
50D53493001
50D53493002
50D53493003
50D53493009
Version
Suitable for
Mushroom head
Padlock attachment
Mechanical interlock kit
50ZAC2
50ZAC8
50ZAC3
Contact blocks
1NO, 1NC
2NO, 2SPST
1NO, 1NC
1NO, 1NO
Order No.
Red
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
Pack
Unit
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
List
Price $
1 unit
Pack
Unit
Used only for raised buttons
50ZMH
50ZAL
50ZAM
16.40
24.50
12.40
1
1
1
Single button
Selector switch
Two button
Two button
50ZAC1
50ZAC8
50ZAC2
50ZAC3
24.50
24.50
24.50
24.50
1
1
1
1
50ZAC6
60.00
1
50ZPL01
50ZPL02
6.20
6.20
1
1
16
50ZAC1
Color
List
Price $
1 unit
Pilot light lens
Red
Green
Pendant Bracket
1 & 2 unit station
3 unit station
50ZAP2
50ZAP3
8.20
8.20
1
1
Replacement lamps
Slide base, lamp type 120PSB
Class 50 type 1, 1B 120V
50D21983001
8.50
1
CONTROL
PRODUCTS
120/240V Dual Voltage, no
lens
Pilot light
Heavy Duty Station Accessories
Version
Suitable for
Color
Order No.
Pushbutton caps
NEMA 4 control stations
NEMA 4 control stations
Red
Black
BHP15X
BHP16X
List
Price $
1 unit
66.00
66.00
Pack
Unit
1
1
Pilot Devices
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-187
Pushbutton Units and Indicator Lights
Class 50 Standard Duty Pushbutton Stations
Standard Duty - 5A 600V NEMA B600
1 Unit Station Surface Mounting—Type 1
1 Unit Station Flush Mounting—Type 1B
2 Pushbutton Stations Surface Mounting—Type 1
2 Pushbutton Stations Flush Mounting—Type 1B
2 Unit Stations Surface Mounting—Type 1
2 Unit Station Flush Mounting—Type 1B
CONTROL
PRODUCTS
16
Dimension drawings
1 Unit Stations—Type 4
Pilot Devices
3 Unit Stations Surface Mounting
16-188
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Pushbutton Complete Units
• Positive Indexing Selectors
standard, which improve contact fidelity.
Contact blocks are heavy duty rated NEMA
A600 and suitable for applications down to
5V/1MA solid state outputs. Molded bodies
and pushers resist arcing and tracking. All
units have stainless steel springs that resist
corrosion and provide strong contact pressure. Captive mounting screws speed panel
assembly.
• Bifurcated Movable Contacts
Push Pull Operators
• Attractive Chrome Plating
Push Pull Operators combine two or three
functions in one unit. The maintained operator has two positions, typically pull to start,
push to stop. The momentary operator with
three positions provides spring return from
both pull and push positions. These units are
also available with a pilot light.
• Accessories see page 16-211.
2 Button Maintained Operator
• Legend Plates see page 16-219.
Maintained Push Buttons consist of two push
buttons and a latching assembly. When actuated the button remains depressed and is
freed only by the release operator to which it
is linked. The button assembly adjusts for
mounting from a 1 13⁄16 inch to a 2 5⁄8 inch
center.
• Enclosures see page 16-220.
Oil tight pilot controls and accessories are
designed to provide long, trouble free service in the most demanding industrial applications. These controls are oil and dust tight
and meet Type 3, 4, 12 and 13 specifications.
Rugged
Transformer Type Pilot Lights
Industrial control operators are durable one
piece castings. Heavy duty plastic buttons
resist oils and corrosion. Silver contacts with
gold flashing carry heavy duty ratings while
allowing for low-voltage applications.
Transformer Type Pilot Lights are available
with a 120, 240, 480 or 600 Volt primary (50/
60 Hertz) and a separate secondary winding
which supplies reduced voltage to a miniature bayonet base 6 Volt lamp. These units
are suitable for applications where vibration
is present and long bulb life is desirable.
Features
• Octagonal Mounting Nuts
• Meets Type 1, 3, 4, 12, 13 and Automotive Standards
• Heavy Duty Rated NEMA A600 Contacts
• Boots Not Required for Type 4
• UL Listed File # E22655
• CSA Certified File # LR6535
• Touchsafe Terminals
Application
Flexible
Pilot controls add luster to panels. Chrome
plating covers exposed metal parts.
Push Button Operators
The Operator Base consists of a durable,
one piece casting equipped with a heavy
duty actuator with a stainless steel spring, a
neoprene actuator sealing ring to prevent oil
and dust from penetrating to the contact
blocks, a neoprene gasket to seal operator
mounting hole and a chrome plated lock nut.
Break
60
30
15
12
7200
6
3
1.5
1.2
720
Ordering Information
• Selector Position and Contact Operation
page 16-209.
Full Voltage Type Pilot Lights
Full Voltage Pilot Lights are available for 6,
12, 24, 120 and 240 Volt AC and DC applications. The 240 Volt pilot light is supplied with
a 120 Volt lamp and a voltage dropping resistor
LED Type Pilot Lights
LED’s (light emitting diodes) can be used in
pilot lights instead of incandescent bulbs because of their long life (up to 10 years), resistance to vibration and ambient sensitivity.
Selector Operators
The Mushroom Head base construction is
identical to the push button base. The actuator is molded of high impact material for either a 1 5⁄8 inch or 2 1⁄2 inch diameter
molded head.
Selector Operators have positive action indexing. Operators are available with either a
short or long lever. The molded black lever is
designed to accept a color insert. A white insert is provided as standard. Each operator
is equipped with a cam to actuate plungers
of contact blocks assembled behind the operator. Two, three and four position operators
are available with seven different cams.
Contact Blocks
Lever color inserts are available in 8 colors.
Mushroom Head Push Button Operators
Make
120
240
480
600
VA
CONTROL
PRODUCTS
Industrial Appearance
Volts
16
Accessories modify standard push buttons,
selector switches and pilot lights. Building
block construction of contact blocks makes
possible many circuitry combinations.
Electrical Ratings
NEMA AC Ratings 50/60Hz
NEMA A600 10 Continuous Amps
Contact Blocks have double break bifurcated silver contacts, with gold flashing as
Pilot Devices
Pilot Light
Push Button
Selector Operator
Selector Push Operation
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-189
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Pushbutton Complete Units
Selection and ordering data
Momentary
Version
Color of
actuator
Contact
blocks
Flush cap
order no.1)
Extended cap List
order no.1)
Price
Mushroom head List
order no.1)
Price
Pushbutton unit with
assembled contact blocks
black
red
green
yellow
1 NO
1 NO
1 NO
1 NO
52PA8A1K
52PA8A2K
52PA8A3K
52PA8A4K
52PA8B1K
52PA8B2K
52PA8B3K
52PA8B4K
34.50
34.50
34.50
34.50
52PB9
52PB9
52PB9
52PB9
1K
2K
3K
4K
59.00
59.00
59.00
59.00
blue
gray
orange
1 NO
1 NO
1 NO
52PA8A5K
52PA8A6K
52PA8A8K
52PA8B5K
52PA8B6K
52PA8B8K
34.50
34.50
34.50
52PB9 5K
52PB9 6K
52PB9 8K
59.00
59.00
59.00
black
red
green
yellow
1 NC
1 NC
1 NC
1 NC
52PA8A1J
52PA8A2J
52PA8A3J
52PA8A4J
52PA8B1J
52PA8B2J
52PA8B3J
52PA8B4J
34.50
34.50
34.50
34.50
52PB9
52PB9
52PB9
52PB9
1J
2J
3J
4J
59.00
59.00
59.00
59.00
blue
gray
orange
1 NC
1 NC
1 NC
52PA8A5J
52PA8A6J
52PA8A8J
52PA8B5J
52PA8B6J
52PA8B8J
34.50
34.50
34.50
52PB9 5J
52PB9 6J
52PB9 8J
59.00
59.00
59.00
black
red
green
yellow
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
52PA8A1A
52PA8A2A
52PA8A3A
52PA8A4A
52PA8B1A
52PA8B2A
52PA8B3A
52PA8B4A
47.00
47.00
47.00
47.00
52PB9
52PB9
52PB9
52PB9
1A
2A
3A
4A
71.00
71.00
71.00
71.00
blue
gray
orange
1 NO + 1 NC 52PA8A5A
1 NO + 1 NC 52PA8A6A
1 NO + 1 NC 52PA8A8A
52PA8B5A
52PA8B6A
52PA8B8A
47.00
47.00
44.00
52PB9 5A
52PB9 6A
52PB9 8A
71.00
71.00
71.00
black
red
green
yellow
2 NO
2 NO
2 NO
2 NO
52PA8A1F
52PA8A2F
52PA8A3F
52PA8A4F
52PA8B1F
52PA8B2F
52PA8B3F
52PA8B4F
47.00
47.00
47.00
47.00
52PB9
52PB9
52PB9
52PB9
1F
2F
3F
4F
71.00
71.00
71.00
71.00
blue
gray
orange
2 NO
2 NO
2 NO
52PA8A5F
52PA8A6F
52PA8A8F
52PA8B5F
52PA8B6F
52PA8B8F
47.00
47.00
47.00
52PB9 5F
52PB9 6F
52PB9 8F
71.00
71.00
71.00
black
red
green
yellow
2 NC
2 NC
2 NC
2 NC
52PA8A1G
52PA8A2G
52PA8A3G
52PA8A4G
52PA8B1G
52PA8B2G
52PA8B3G
52PA8B4G
47.00
47.00
47.00
47.00
52PB9
52PB9
52PB9
52PB9
1G
2G
3G
4G
71.00
71.00
71.00
71.00
blue
gray
orange
2 NC
2 NC
2 NC
52PA8A5G
52PA8A6G
52PA8A8G
52PA8B5G
52PA8B6G
52PA8B8G
47.00
47.00
47.00
52PB9 5G
52PB9 6G
52PB9 8G
71.00
71.00
71.00
black
red
green
yellow
2 NO + 2 NC
2 NO + 2 NC
2 NO + 2 NC
2 NO + 2 NC
52PA8A1B
52PA8A2B
52PA8A3B
52PA8A4B
52PA8B1B
52PA8B2B
52PA8B3B
52PA8B4B
72.00
72.00
72.00
72.00
52PB9
52PB9
52PB9
52PB9
1B
2B
3B
4B
96.00
96.00
96.00
96.00
blue
gray
orange
2 NO + 2 NC 52PA8A5B
2 NO + 2 NC 52PA8A6B
2 NO + 2 NC 52PA8A8B
52PA8B5B
52PA8B6B
52PA8B8B
72.00
72.00
72.00
52PB9 5B
52PB9 6B
52PB9 8B
96.00
96.00
96.00
$
$
Pack
Unit
1
Pushbutton with flush cap
Order no. change
Small operating head - 1 5/8" (41.3 mm)
Large operating head - 2.5" (63.5 mm)
Pilot Devices
1
1
Pushbutton with 1 5/8" mushroom head
CONTROL
PRODUCTS
16
Pushbutton with extended cap
1
1
1
D
E
1) For other contact block assemblies replace the 8th digit of the catalog
number as follows:
C = 3 NO + 3 NC
D = 4 NO + 4 NC
E = 1 NC (EB)
H = 1 NO (EM)
16-190
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Push Pull Operators
Selection and ordering data
Version
2 position push-pull
52PA2A2A
52PA2ACA
52PA2V2A
52PA2W2A
52PA3W2U
Order no.
List
Price
$
Order no.
List
Price
$
Pack
Unit
2 Position Push Pull Maintained,
Non Illuminated
Metal Mushroom Head,
1 5/8" (41.3 mm)
red
green
chrome
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2A2A
52PA2A3A
52PA2ACA
98.00
98.00
98.00
Small Plastic Mushroom Head,
1 5/8" (41.3 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2W1A
52PA2W2A
52PA2W3A
88.00
88.00
88.00
Large Plastic Mushroom Head,
2 1/2" (63.5 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2V1A
52PA2V2A
52PA2V3A
106.00
106.00
106.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA3A2U
52PA3A3U
52PA3ACU
96.00
96.00
96.00
3 Position Push Pull Momentary,
Non-Illuminated (Spring return to
center-pull to start, push to stop)1)
Metal Mushroom Head,
red
1 5/8" (41.3 mm)
green
chrome
Small Plastic Mushroom Head,
1 5/8" (41.3 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA3W1U
52PA3W2U
52PA3W3U
96.00
96.00
96.00
Large Plastic Mushroom Head,
2 1/2" (63.5 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA3V1U
52PA3V2U
52PA3V3U
106.00
106.00
106.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
Operators
with incandescent lamp
52PA2DNA
52PA2D2A
52PA2D3A
52PA2D9A
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1
1
119.00
137.00
137.00
137.00
Operators
with LED
lamp*****2)
*****
52PE2D2A
52PE2D3A
52PE2D9A
–––––
151.00
151.00
151.00
52PA2DRA
52PA2DSA
52PA2DTA
137.00
137.00
137.00
52PE2DRA
52PE2DSA
52PE2DTA
151.00
151.00
151.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2GNA
52PA2G2A
52PA2G3A
52PA2G9A
119.00
137.00
137.00
137.00
*****
52PE2G2A
52PE2G3A
52PE2G9A
–––––
151.00
151.00
151.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2GRA
52PA2GSA
52PA3GTA
137.00
137.00
137.00
52PE2GRA
52PE2GSA
52PE2GTA
151.00
151.00
151.00
240V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2HNA
52PA2H2A
52PA2H3A
52PA2H9A
119.00
137.00
137.00
137.00
*****
52PE2H2A
52PE2H3A
52PE2H9A
–––––
151.00
151.00
151.00
1
480V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2JNA
52PA2J2A
52PA2J3A
52PA2J9A
119.00
137.00
137.00
137.00
*****
52PE2J2A
52PE2J3A
52PE2J9A
–––––
151.00
151.00
151.00
1
600V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PA2KNA
52PA2K2A
52PA2K3A
52PA2K9A
119.00
137.00
137.00
137.00
*****
52PE2K2A
52PE2K3A
52PE2K9A
–––––
151.00
151.00
151.00
1
full red
full green
full amber
120V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
full red
full green
full amber
Discount Schedule PILO
1
Pilot Devices
1) Blocks cannot be interchanged (start-stop circuit).
1
CONTROL
PRODUCTS
2 Position Push Pull Maintained,
Illuminated
24V Full Voltage, type 757, or 24V less operating head
LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
52PA2D2A
52PA2DRA
Contact
blocks
16
2 position push pull
with fully illuminated
mushroom head
Color of actuator
2) LED color must match lens color.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-191
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Push Pull Operators
Selection and ordering data
Order no.
List
operators with Price
incandescent
lamp
$
Order no.
operators with
LED type2)
List
Price
Pack
$
Unit
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3DNU
52PA3D2U
52PA3D3U
52PA3D9U
119.00
137.00
137.00
137.00
*****
52PE3D2U
52PE3D3U
52PE3D9U
–––––
151.00
151.00
151.00
1
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3DRU
52PA3DSU
52PA3DTU
137.00
137.00
137.00
52PE3DRU
52PE3DSU
52PE3DTU
151.00
151.00
151.00
1
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3GNU
52PA3G2U
52PA3G3U
52PA3G9U
119.00
137.00
137.00
137.00
*****
52PE3G2U
52PE3G3U
52PE3G9U
–––––
151.00
151.00
151.00
1
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3GRU
52PA3GSU
52PA3GTU
137.00
137.00
137.00
52PE3GRU
52PE3GSU
52PE3GTU
151.00
151.00
151.00
1
240V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3HNU
52PA3H2U
52PA3H3U
52PA3H9U
119.00
137.00
137.00
137.00
*****
52PE3H2U
52PE3H3U
52PE3H9U
–––––
151.00
151.00
151.00
1
480V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3JNU
52PA3J2U
52PA3J3U
52PA3J9U
119.00
137.00
137.00
137.00
*****
52PE3J2U
52PE3J3U
52PE3J9U
–––––
151.00
151.00
151.00
1
600V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA3KNU
52PA3K2U
52PA3K3U
52PA3K9U
119.00
137.00
137.00
137.00
*****
52PE3K2U
52PE3K3U
52PE3K9U
–––––
151.00
151.00
151.00
1
Version
3 position push-pull
illuminated
Color of actuator
3 Position Push Pull Momentary,
Illuminated, spring return to center 1)
24V Full Voltage 757 type, or 24V less operating head
LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
full red
full green
full amber
52PA3D2U
120V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
full red
full green
full amber
Pilot Devices
CONTROL
PRODUCTS
16
52PA3DRU
Contact
blocks
1) Blocks cannot be interchanged (start-stop circuit).
2) LED color must match lens color.
16-192
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Selector Switch Complete Units
Selection and ordering data
Version
Lever type
Contact
blocks
Cam1) Order no.
List
Price
Pack
$
unit
Selector Switches with 2 switching positions
Maintained operation
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1NO
1NC
1NO + 1NC
1NO
1NC
1NO + NC
A
A
A
A
A
A
52SA2AABK1
52SA2AABJ1
52SA2AABA1
52SB2AABK1
52SB2AABJ1
52SB2AABA1
42.50
42.50
55.00
42.50
42.50
55.00
1
Spring return from right operation
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1NO
1NC
1NO + 1NC
1NO
1NC
1NO + 1NC
A
A
A
A
A
A
52SA2ACBK1
52SA2ACBJ1
52SA2ACBA1
52SB2ACBK1
52SB2ACBJ1
52SB2ACBA1
59.00
59.00
72.00
59.00
59.00
72.00
1
Short lever assembled
selector switch
Selector Switches with 3 switching positions
1NO + 1NC
2NC + 1NO
2NO + 2NC
1NO + 1NC
2NC + 1NO
2NO + 2NC
C
G
C
C
G
C
52SA2CABA1
52SA2GABJ2K1
52SA2CABA2
52SB2CABA1
52SB2GABJ2K1
52SB2CABA2
55.00
67.00
80.00
55.00
67.00
80.00
1
Spring return from right2)
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1NO + 1NC
2NC + 1NO
2NO + 2NC
1NO + 1NC
2NC + 1NO
2NO + 2NC
C
G
C
C
G
C
52SA2CCBA1
52SA2GCBJ2K1
52SA2CCBA2
52SB2CCBA1
52SB2GCBJ2K1
52SB2CCBA2
72.00
84.00
96.00
72.00
84.00
96.00
1
Spring return from right & left operation Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1NO + 1NC
2NC + 1NO
2NO + 2NC
1NO + 1NC
2NC + 1NO
2NO + 2NC
C
G
C
C
G
C
52SA2CDBA1
52SA2GDBJ2K1
52SA2CDBA2
52SB2CDBA1
52SB2GDBJ2K1
52SB2CDBA2
72.00
84.00
96.00
72.00
84.00
96.00
1
Assembled keyed
selector switch
Key-operated selector switches, 2 switching positions
Maintained operation
Key removable in left positions 1NO
Key removable in left positions 1NC
Key removable in left positions 1NO + 1NC
A
A
A
52SC6AFK1
52SC6AFJ1
52SC6AFA1
92.00
92.00
105.00
1
Key removable in left positions 1NO
Key removable in left positions 1NC
Key removable in left positions 1NO + 1NC
A
A
A
52SC6AXK1
52SC6AXJ1
52SC6AXA1
108.00
108.00
121.00
1
Key-operated selector switches, 3 switching positions
Maintained operation
Key removable in all positions 1NC + 1NO
Key removable in all positions 2NC + 1NO
Key removable in all positions 2NO + 2NC
C
G
C
52SC6CEA1
52SC6GEJ2K1
52SC6CEA2
105.00
117.00
129.00
1
Key removable in all positions 1NO + 1NC
Key removable in all positions 2NC + 1NO
Key removable in all positions 2NO + 2NC
C
G
C
52SC6CZA1
52SC6GZJ2K1
52SC6CZA2
121.00
133.00
145.00
1
Spring return from right & left operation Key removable in all positions 1NO + 1NC
Key removable in all positions 2NC + 1NO
Key removable in all positions 2NO + 2NC
C
G
C
52SC6CVA1
52SC6GVJ2K1
52SC6CVA2
121.00
133.00
145.00
1
Spring return from right operation
Spring return from right operation3)
CONTROL
PRODUCTS
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
16
Maintained operation
Long lever assembled
selector switch
Pilot Devices
1) For contact operation, see cam selection table on page 16-209.
2) Spring return from left available by substituting "BB" for "CB" in the order
number. Eg. 52SA2CBBA1.
Discount Schedule PILO
3) Spring return from left available by substituting "CY" for "CZ" in the order
number. Eg. 52SC6CYA1.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-193
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Indicator Light Operators
Selection and ordering data
Version
Color of actuator
Order no.
List
Price
Operators
with Incandescent lamp $
Order no.
Operators
with LED
lamp 3)
List
Price
Pack
$
Unit
Indicator light with plastic lens Full voltage type AC/DC 1) 2)
6-8V with 755 type, or 6V LED
red
green
amber
less lens
52PA4B2
52PA4B3
52PA4B9
52PA4BN
72.00
72.00
72.00
66.00
12V with 756 type
red
green
amber
less lens
52PA4C2
52PA4C3
52PA4C9
52PA4CN
72.00
72.00
72.00
66.00
24V with 757 type, or 24V LED
red
green
amber
less lens
52PA4D2
52PA4D3
52PA4D9
52PA4DN
72.00
72.00
72.00
66.00
52PE4D2
52PE4D3
52PE4D9
—
86.00
86.00
86.00
–––––
1
120V with 120MB type, or 120V LED
red
green
amber
less lens
52PC4E2
52PC4E3
52PC4E9
52PC4EN
72.00
72.00
72.00
66.00
52PE4E2
52PE4E3
52PE4E9
—
86.00
86.00
86.00
–––––
1
120V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
52PA4G2
52PA4G3
52PA4G9
52PA4GN
88.00
88.00
88.00
82.00
52PE4G2
52PE4G3
52PE4G9
—
102.00
102.00
102.00
–––––
1
240V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
52PA4H2
52PA4H3
52PA4H9
52PA4HN
88.00
88.00
88.00
82.00
52PE4H2
52PE4H3
52PE4H9
—
102.00
102.00
102.00
–––––
1
277V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
52PA4T2
52PA4T3
52PA4T9
52PA4TN
88.00
88.00
88.00
82.00
52PE4T2
52PE4T3
52PE4T9
—
102.00
102.00
102.00
–––––
1
480V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
52PA4J2
52PA4J3
52PA4J9
52PA4JN
88.00
88.00
88.00
82.00
52PE4J2
52PE4J3
52PE4J9
—
102.00
102.00
102.00
–––––
1
600V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
52PA4K2
52PA4K3
52PA4K9
52PA4KN
88.00
88.00
88.00
82.00
52PE4K2
52PE4K3
52PE4K9
—
102.00
102.00
102.00
–––––
1
red
green
amber
less lens
52PC4N2
52PC4N3
52PC4N9
52PC4NN
72.00
72.00
72.00
66.00
52PE4N2
52PE4N3
52PE4N9
—
86.00
86.00
86.00
–––––
1
Pilot light
52PE4B2
52PE4B3
52PE4B9
—
86.00
86.00
86.00
1
1
CONTROL
PRODUCTS
16
Indicator light with plastic lens Transformer type AC 1) 2)
Indicator light with plastic lens Resistor type AC/DC 1) 2)
240V with 120V 120MB type lamp, or 120V
LED
Color code table: blue
clear
white
5
A
B
Pilot Devices
5
A
B
1) All illuminated devices come with std. Touchsafe shield per UL stds.
16-194
2) For factory installed glass lens, replace the 5th
character with "5".
3) LED color must match lens color. Consult Factory for Neon types.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Push to Test Units
Selection and ordering data
Version
Color of
actuator
Contact
blocks
Order no.
List
Price
Operators
with Incandescent lamp $
Order no.
List
Price
Pack
Operators
with LED
lamp 2)
$
Unit
Illuminated pushbuttons/Push to test
indicator light with plastic lens Full voltage type AC/DC 1)3)
Push to test/illuminated
pushbutton
6-8V with 755 type, or 6V LED
red
green
amber
less lens
1NO + 1NC
1NO + 1NC
1NO + 1NC
1NO + 1NC
52PA6B2A
52PA6B3A
52PA6B9A
52PA6BNA
96.00
96.00
96.00
91.00
52PE6B2A
52PE6B3A
52PE6B9A
—
110.00
110.00
110.00
–––––
1
24V with 757 type, or 24V LED
red
green
amber
less lens
1NO + 1NC
1NO + 1NC
1NO + 1NC
1NO + 1NC
52PA6D2A
52PA6D3A
52PA6D9A
52PA6DNA
96.00
96.00
96.00
91.00
52PE6D2A
52PE6D3A
52PE6D9A
—
110.00
110.00
110.00
–––––
1
120V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6G2A
52PA6G3A
52PA6G9A
52PA6GNA
112.00
112.00
112.00
107.00
52PE6G2A
52PE6G3A
52PE6G9A
—
126.00
126.00
126.00
–––––
1
240V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6H2A
52PA6H3A
52PA6H9A
52PA6HNA
112.00
112.00
112.00
107.00
52PE6H2A
52PE6H3A
52PE6H9A
—
126.00
126.00
126.00
–––––
1
480V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6J2A
52PA6J3A
52PA6J9A
52PA6JNA
112.00
112.00
112.00
107.00
52PE6J2A
52PE6J3A
52PE6J9A
—
126.00
126.00
126.00
–––––
1
600V with 6V 755 type lamp, or 6V LED
red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6K2A
52PA6K3A
52PA6K9A
52PA6KNA
112.00
112.00
112.00
107.00
52PE6K2A
52PE6K3A
52PE6K9A
—
126.00
126.00
126.00
–––––
1
120V with 24V 757 type lamp, or 24V LED red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6M2A
52PA6M3A
52PA6M9A
52PA6MNA
96.00
96.00
96.00
91.00
52PE6M2A
52PE6M3A
52PE6M9A
—
110.00
110.00
110.00
–––––
1
240V with 24V 757 type lamp, or 24V LED red
green
amber
less lens
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PA6N2A
52PA6N3A
52PA6N9A
52PA6NNA
96.00
96.00
96.00
91.00
52PE6N2A
52PE6N3A
52PE6N9A
—
110.00
110.00
110.00
–––––
1
52PA6D2A
Illuminated pushbuttons/Push to test
indicator light with plastic lens - Transformer type AC 1)3)
52PA6G2A
16
CONTROL
PRODUCTS
Push to test indicator light with
plastic lens - Resistor type AC/DC 3)
Color code table: blue
clear
white
5
A
B
5
A
B
Wiring Diagrams
Illuminated Push Button
Push to Test
Pilot Devices
1) All illuminated devices come with std. Touch-safe shield per UL stds.
2) LED color must match lens color. Consult Factory for Neon types.
Discount Schedule PILO
3) For factory installed lens guard, add suffix "V".
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-195
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Pushbutton Operators Only
Selection and ordering data
Version
Color of actuator
Order no.
Pushbutton with flush cap
black
red
green
yellow
52PA8A1
52PA8A2
52PA8A3
52PA8A4
22.00
22.00
22.00
22.00
blue
gray
orange
less cap
kit with all colors
52PA8A5
52PA8A6
52PA8A8
52PA8
52PA8AN
22.00
22.00
22.00
20.50
25.50
b l a ck
red
green
yellow
52PA8B1
52PA8B2
52PA8B3
52PA8B4
22.00
22.00
22.00
22.00
blue
gray
orange
less cap
kit with all colors
52PA8B5
52PA8B6
52PA8B8
52PA8
52PA8BN
22.00
22.00
22.00
20.50
25.50
black
red
green
yellow
52PB9D1
52PB9D2
52PB9D3
52PB9D4
46.50
46.50
46.50
46.50
blue
gray
orange
less cap
kit with all colors
52PB9D5
52PB9D6
52PB9D8
52PB9
52PB9DN
46.50
46.50
46.50
38.50
49.00
black
red
52PB9E1
52PB9E2
55.00
55.00
green
yellow
52PB9E3
52PB9E4
55.00
55.00
blue
gray
orange
less cap
less cap with lens kit
52PB9E5
52PB9E6
52PB9E8
52PB9
52PB9EN
55.00
55.00
55.00
38.50
49.00
Metal Mushroom Head, 1 5/8" (41.3 mm)
(Threaded)
red
green
chrome
52PA2A2
52PA2A3
52PA2AC
73.00
73.00
73.00
1
Small Plastic Mushroom Head, 1 5/8" (41.3 mm)
(Set Screw)
black
red
green
52PA2W1
52PA2W2
52PA2W3
63.00
63.00
63.00
1
Large Plastic Mushroom Head, 2 1/2" (63.5 mm)
(Set Screw)
black
red
green
52PA2V1
52PA2V2
52PA2V3
71.00
71.00
71.00
1
Flush pushbutton operator
Pushbutton with extended cap
CONTROL
PRODUCTS
16
Pushbutton with mushroom cap
1 5/8" (41.3mm)
Pushbutton with mushroom cap
2 1/2" (63.5mm)
List
Price
Pack
$
Unit
1
1
1
1
2 position push pull operator
Pilot Devices
2 position push pull maintained, non illuminated
16-196
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Selector Switch Operators
Selection and ordering data
Version
Lever type
Input Order no.
Color of Cam
lever
Code 2) Voltage
insert
List
Price
Pack
$
unit
Selector Switches with 2 switching positions
Non-Illuminated, short lever
Non-Illuminated, long lever
Maintained operation
Spring return from right operation
White
White
A
A
52SA2AAB 30.50
52SB2AAB 30.50
1
Illuminated, short lever 1)
with full voltage 24V, 757 type lamp
A
24V
52SA7ADN 73.00
1
Illuminated, short lever 1)
with 50/60 Hz transformer 6V,
755 type lamp
A
A
A
120V
240V
24V
52SA7AGN 91.00
52SA7AHN 91.00
52SA7ALN 91.00
1
Non-Illuminated, short lever
Non-Illuminated, long lever
White
White
A
A
52SA2ACB 47.00
52SB2ACB 47.00
1
White
White
White
White
White
White
White
White
White
White
B
B
C 3)
C 3)
D
D
E
E
G
G
52SA2BAB
52SB2BAB
52SA2CAB
52SB2CAB
52SA2DAB
52SB2DAB
52SA2EAB
52SB2EAB
52SA2GAB
52SB2GAB
30.50
30.50
30.50
30.50
30.50
30.50
30.50
30.50
30.50
30.50
1
Selector Switches with 3 switching positions
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Maintained operation
Illuminated, short lever 1)
with full voltage 24V, 757 type lamp
Illuminated, short lever 1)
with 50/60 Hz transformer 6V,
755 type lamp
24V
24V
52SA7BDN 73.00
52SA7CDN 73.00
1
B
C 3)
B
C 3)
B
C
120V
120V
240V
240V
24V
24V
52SA7BGN
52SA7CGN
52SA7BHN
52SA7CHN
52SA7BLN
52SA7CLN
91.00
91.00
91.00
91.00
91.00
91.00
1
White
White
White
White
White
White
White
White
White
White
B
B
C 3)
C 3)
D
D
E
E
G
G
52SA2BCB
52SB2BCB
52SA2CCB
52SB2CCB
52SA2DCB
52SB2DCB
52SA2ECB
52SB2ECB
52SA2GCB
52SB2GCB
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
1
Spring return from left operation
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
White
White
White
White
White
White
White
White
White
White
B
B
C 3)
C 3)
D
D
E
E
G
G
52SA2BBB
52SB2BBB
52SA2CBB
52SB2CBB
52SA2DBB
52SB2DBB
52SA2EBB
52SB2EBB
52SA2GBB
52SB2GBB
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
1
Spring return from left and right operation Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
White
White
White
White
White
White
White
White
White
White
B
B
C 3)
C 3)
D
D
E
E
G
G
52SA2BDB
52SB2BDB
52SA2CDB
52SB2CDB
52SA2DDB
52SB2DDB
52SA2EDB
52SB2EDB
52SA2GDB
52SB2GDB
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
1
White
White
H
H
52SA2HAB 30.50
52SB2HAB 30.50
1
Pilot Devices
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
Non-Illuminated, short lever
Non-Illuminated, long lever
CONTROL
PRODUCTS
Spring return from right operation
16
B
C 3)
Selector Switches with 4 switching positions
Maintained operation
1) Illuminated selector switches are provided
without lenses. Lens kit must be ordered separately on page 16-211.
Discount Schedule PILO
Non-Illuminated, short lever
Non-Illuminated, long lever
2) For contact operation, see cam selelction chart
on page 16-209.
3) The C cam is limited to 4 contact blocks, 1 or 2
pole.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-197
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Selector Switch Operators
Selection and ordering data
Version
Button
Position
Color of
Cam
Order no.
lever insert Code 2)
List
Price
Pack
$
unit
Selector Pushbutton Operators
NEMA 12/13 only
Flush type cap
2
Black
Black
Black
P
Q
R
52SA3P1
52SA3Q1
52SA3R1
47.00
47.00
47.00
1
Flush
2
Red
Red
Red
P
Q
R
52SA3P2
52SA3Q2
52SA3R2
47.00
47.00
47.00
1
Flush
3
Black
Red
S
S
52SA3S1
52SA3S2
47.00
47.00
1
Extended
2
Black
Black
Black
P
Q
R
52SA4P1
52SA4Q1
52SA4R1
47.00
1
47.00
47.00
Extended
2
Red
Red
Red
P
Q
R
52SA4P2
52SA4Q2
52SA4R2
47.00
47.00
47.00
1
Extended
3
Black
Red
S
S
52SA4S1
52SA4S2
47.00
47.00
1
Pilot Devices
CONTROL
PRODUCTS
16
1/2" raised type cap
Flush
1) For contact operation, see cam selection chart
on page 16-209.
16-198
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Selector Switch Operators
Selection and ordering data
Version
Key removal
position
Lock No.
2 Pos spring return from right to center Left
501CH
Key-operated selector Switches with 2 switching positions
Maintained operation
B oth
501CH
Left
501CH
Key-operated selector Switches with 3 switching positions
Maintained operation
A ll
501CH
Spring return from left and right operation
Right
501CH
Center
501CH
Left and right
501CH
Left and center
501CH
Right and center
501CH
Center
501CH
Left and center
501CH
Center
501CH
Right
501CH
Right and center
501CH
Center
501CH
A
52SC6AX
A
A
52SC6AE
52SC6AF
80.00
80.00
1
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
B
C 2)
D
E
G
52SC6BE
52SC6CE
52SC6DE
52SC6EE
52SC6GE
52SC6BF
52SC6CF
52SC6DF
52SC6EF
52SC6GF
52SC6BG
52SC6CG
52SC6DG
52SC6EG
52SC6GG
52SC6BH
52SC6CH
52SC6DH
52SC6EH
52SC6GH
52SC6BJ
52SC6CJ
52SC6DJ
52SC6EJ
52SC6GJ
52SC6BK
52SC6CK
52SC6DK
52SC6EK
52SC6GK
52SC6BM
52SC6CM
52SC6DM
52SC6EM
52SC6GM
52SC6BU
52SC6CU
52SC6DU
52SC6EU
52SC6GU
52SC6BZ
52SC6CZ
52SC6DZ
52SC6EZ
52SC6GZ
52SC6BT
52SC6CT
52SC6DT
52SC6ET
52SC6GT
52SC6BW
52SC6CW
52SC6DW
52SC6EW
52SC6GW
52SC6BY
52SC6CY
52SC6DY
52SC6EY
52SC6GY
52SC6BV
52SC6CV
52SC6DV
52SC6EV
52SC6GV
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
96.00
1
1) For contact operation, see cam selection chart on page 16-209.
2) C cam limited to 4 single or double pole blocks on spring return operators.
Discount Schedule PILO
1
1
1
1
1
1
1
1
1
1
1
Pilot Devices
.............................................................................................. 5
Lock types keyed different from standard - up to 25 different keys
To order special locks for keyed selector switches, append
#550CH
X298
#549CH
corresponding 'X' suffix to part number. (Same list price as standard key)
X299
#548CH
X300
Ordering example
#547CH
X301
52SC6AEX298
#506CH
X302
1
CONTROL
PRODUCTS
Spring return from left operation
501CH
List
Pack
Price
$
unit
80.00
1
16
Spring return from right operation
Left
Cam
Order no.
Code 1)
3)
1
3) Change the "6" to a "5" in the fifth position and add suffix "X", 25 diff. available.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-199
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Special Devices
Selection and ordering data
Version
Ohms / color
Order no.
Potentiometer operator
2 Watts (Type 12/3 only)
50
250
500
1K
2.5 K
5K
10 K
15 K
25 K
100 K
500 K
2M
5M
52MA3B01
52MA3B04
52MA3B06
52MA3B08
52MA3B10
52MA3B12
52MA3B14
52MA3B15
52MA3B16
52MA3B20
52MA3B24
52MA3B28
52MA3B31
2 Button maintained operator
Button remains depressed when pushed
Black/red
less caps
red
green
gray
Pack
$
Unit
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
164.00
1
52MA2A1A2
52MA2
69.00
66.00
1
52ABW22)
52ABW32)
52ABW62)
47.00
47.00
47.00
1
52ABT
47.00
1
52MA4G2
52MA4G3
52MA4G5
52MA4G9
52MA4GA
52MA4GB
52MA4GN
87.00
87.00
87.00
87.00
87.00
87.00
82.00
1
52NP02
52NP02E
2.40
10.70
1
1
CONTROL
PRODUCTS
16
Wobble stick 2.5" operator
For use with 52BAJ (NC) contact block
List Price
Maintained toggle operator
Compact pilot lights - 11/16" mounting hole1) / 18 mm
Transformer type - 120V with 6V 755 type lamp
red
green
blue
amber
clear
white
less lens
Pilot Devices
Legend plate for compact pilot light (1 7/16" x 1 7/16")
Blank (brushed aluminum)
Custom engraved (brushed aluminum)
1) 11/16" mounting hole required
2) For use with 52BAJ (NC) contact block
16-200
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Complete Units
Selection and ordering data
Contact
blocks
Flush cap
order no.1)
Extended cap
order no.1)
List
Price
Mushroom head List
order no.1)
Price
$
Unit
Pushbutton unit with
assembled contact blocks
black
red
green
yellow
1 NO
1 NO
1 NO
1 NO
52PX8A1K
52PX8A2K
52PX8A3K
52PX8A4K
52PX8B1K
52PX8B2K
52PX8B3K
52PX8B4K
34.50
34.50
34.50
34.50
52PX9
52PX9
52PX9
52PX9
1K
2K
3K
4K
59.00
59.00
59.00
59.00
1
blue
gray
orange
1 NO
1 NO
1 NO
52PX8A5K
52PX8A6K
52PX8A8K
52PX8B5K
52PX8B6K
52PX8B8K
34.50
34.50
34.50
52PX9 5K
52PX9 6K
52PX9 8K
59.00
59.00
59.00
1
black
red
green
yellow
1 NC
1 NC
1 NC
1 NC
52PX8A1J
52PX8A2J
52PX8A3J
52PX8A4J
52PX8B1J
52PX8B2J
52PX8B3J
52PX8B4J
34.50
34.50
34.50
34.50
52PX9
52PX9
52PX9
52PX9
1J
2J
3J
4J
59.00
59.00
59.00
59.00
1
blue
gray
orange
1 NC
1 NC
1 NC
52PX8A5J
52PX8A6J
52PX8A8J
52PX8B5J
52PX8B6J
52PX8B8J
34.50
34.50
34.50
52PX9 5J
52PX9 6J
52PX9 8J
59.00
59.00
59.00
1
black
red
green
yellow
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
52PX8A1A
52PX8A2A
52PX8A3A
52PX8A4A
52PX8B1A
52PX8B2A
52PX8B3A
52PX8B4A
47.00
47.00
47.00
47.00
52PX9
52PX9
52PX9
52PX9
1A
2A
3A
4A
71.00
71.00
71.00
71.00
1
blue
gray
orange
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
52PX8A5A
52PX8A6A
52PX8A8A
52PX8B5A
52PX8B6A
52PX8B8A
47.00
47.00
47.00
52PX9 5A
52PX9 6A
52PX9 8A
71.00
71.00
71.00
1
black
red
green
yellow
2 NO
2 NO
2 NO
2 NO
52PX8A1F
52PX8A2F
52PX8A3F
52PX8A4F
52PX8B1F
52PX8B2F
52PX8B3F
52PX8B4F
47.00
47.00
47.00
47.00
52PX9
52PX9
52PX9
52PX9
1F
2F
3F
4F
71.00
71.00
71.00
71.00
1
blue
gray
orange
2 NO
2 NO
2 NO
52PX8A5F
52PX8A6F
52PX8A8F
52PX8B5F
52PX8B6F
52PX8B8F
47.00
47.00
47.00
52PX9 5F
52PX9 6F
52PX9 8F
71.00
71.00
71.00
1
black
red
green
yellow
2 NC
2 NC
2 NC
2 NC
52PX8A1G
52PX8A2G
52PX8A3G
52PX8A4G
52PX8B1G
52PX8B2G
52PX8B3G
52PX8B4G
47.00
47.00
47.00
47.00
52PX9
52PX9
52PX9
52PX9
1G
2G
3G
4G
71.00
71.00
71.00
71.00
1
blue
gray
orange
2 NC
2 NC
2 NC
52PX8A5G
52PX8A6G
52PX8A8G
52PX8B5G
52PX8B6G
52PX8B8G
47.00
47.00
47.00
52PX9 5G
52PX9 6G
52PX9 8G
71.00
71.00
71.00
1
black
red
green
yellow
2 NO + 2 NC
2 NO + 2 NC
2 NO + 2 NC
2 NO + 2 NC
52PX8A1B
52PX8A2B
52PX8A3B
52PX8A4B
52PX8B1B
52PX8B2B
52PX8B3B
52PX8B4B
72.00
72.00
72.00
72.00
52PX9
52PX9
52PX9
52PX9
1B
2B
3B
4B
96.00
96.00
96.00
96.00
1
blue
gray
orange
2 NO + 2 NC
2 NO + 2 NC
2 NO + 2 NC
52PX8A5B
52PX8A6B
52PX8A8B
52PX8B5B
52PX8B6B
52PX8B8B
72.00
72.00
72.00
52PX9 5B
52PX9 6B
52PX9 8B
96.00
96.00
96.00
1
$
Flush assembled pushbutton
Extended assembled pushbutton
Mushroom head assembled pushbutton
Order no. change
Small operating head - 1 5/8" (41.3 mm)
Large operating head - 2.5" (63.5 mm)
Pack
CONTROL
PRODUCTS
Color of
actuator
16
Version
D
E
Pilot Devices
1) For other contact block assemblies replace the 8th digit of the catalog
number as follows:
C = 3 NO + 3 NC
D = 4 NO + 4 NC
E = 1 NC (EB)
H = 1 NO (EM)
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-201
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Push Pull Operators Complete Units
Selection and ordering data
Version
Color of actuator
Contact
blocks
Order no.
List
Price
Order no.
$
List
Price
Pack
$
Unit
2 Position Push Pull Maintained,
Non Illuminated
2 position push-pull
2 position push pull
illuminated
CONTROL
PRODUCTS
16
3 position push pull
Small Plastic Mushroom Head,
1 5/8" (41.3 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2W1A
52PX2W2A
52PX2W3A
88.00
88.00
88.00
1
Large Plastic Mushroom Head,
2 1/2" (63.5 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2V1A
52PX2V2A
52PX2V3A
106.00
106.00
106.00
1
Small Plastic Mushroom Head,
1 5/8" (41.3 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX3W1U
52PX3W2U
52PX3W3U
96.00
96.00
96.00
1
Large Plastic Mushroom Head,
2 1/2" (63.5 mm)
black
red
green
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX3V1U
52PX3V2U
52PX3V3U
104.00
104.00
104.00
1
less operating head
chrome red
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
Operators
with incandescent lamp
52PX2DNA
52PX2D2A
52PX2D3A
52PX2D9A
137.00
137.00
137.00
137.00
Operators
with LED
lamp 2)
*****
52PX2D2AY
52PX2D3AY
52PX2D9AY
––––– 1
151.00
151.00
151.00
full red
full green
full amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2DRA
52PX2DSA
52PX2DTA
137.00 52PX2DRAY
137.00 52PX2DSAY
173.00 52PX2DTAY
151.00 1
151.00
151.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2GNA
52PX2G2A
52PX2G3A
52PX2G9A
137.00
137.00
137.00
137.00
*****
52PX2G2AY
52PX2G3AY
52PX2G9AY
––––– 1
151.00
151.00
151.00
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2GRA
52PX2GSA
52PX2GTA
137.00 52PX2GRAY
137.00 52PX2GSAY
137.00 52PX2GTAY
151.00 1
151.00
151.00
240V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2HNA
52PX2H2A
52PX2H3A
52PX2H9A
119.00
137.00
137.00
137.00
*****
52PX2H2AY
52PX2H3AY
52PX2H9AY
–––––
151.00 1
151.00
151.00
480V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2JNA
52PX2J2A
52PX2J3A
52PX2J9A
119.00
137.00
137.00
137.00
*****
52PX2J2AY
52PX2J3AY
52PX2J9AY
––––– 1
151.00
151.00
151.00
600V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX2KNA
52PX2K2A
52PX2K3A
52PX2K9A
119.00
137.00
137.00
137.00
*****
52PX2K2AY
52PX2K3AY
52PX2K9AY
––––– 1
151.00
151.00
151.00
3 Position Push Pull Momentary,
Non-Illuminated, spring return to
center-pull to start, push to
stop1)
2 Position Push Pull Maintained,
Illuminated
24V Full Voltage with 757 type
arge Plastic Mushroom Head, or
24V LED,
1 3/4" (44.5 mm)
120V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
Pilot Devices
full red
full green
full amber
1) Blocks cannot be interchanged (start-stop circuit).
2) LED color must match lens color.
16-202
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Push Pull Operators
Selection and ordering data
Version
Color of actuator**
Contacts
Order #
List
Operators with Price
incandescent $
lamp
Order #
List
Operators with Price
2
$
LED lamp )
Pack
Unit
3 Position Push Pull Momentary,
Illuminated, spring return to
center1)
3 position push pull
illuminated
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PX3DNU
52PX3D2U
52PX3D3U
52PX3D9U
52PX3DRU
52PX3DSU
52PX3DTU
119.00
137.00
137.00
137.00
119.00
119.00
119.00
*****
52PX3D2UY
52PX3D3UY
52PX3D9UY
52PX3DRUY
52PX3DSUY
52PX3DTUY
––––– 1
151.00
151.00
151.00
151.00
1
151.00
151.00
120V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
full red
full green
full amber
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PX3GNU
52PX3G2U
52PX3G3U
52PX3G9U
52PX3GRU
52PX3GSU
52PX3GTU
119.00
137.00
137.00
137.00
119.00
119.00
119.00
*****
52PX3G2UY
52PX3G3UY
52PX3G9UY
52PX3GRUY
52PX3GSUY
52PX3GTUY
––––– 1
151.00
151.00
151.00
151.00
1
151.00
151.00
240V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1NC + 1NO
1NC + 1NO
1NC + 1NO
1NC + 1NO
52PX3HNU
52PX3H2U
52PX3H3U
52PX3H9U
119.00
137.00
137.00
137.00
*****
52PX3H2UY
52PX3H3UY
52PX3H9UY
–––––
151.00 1
151.00
151.00
480V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX3JNU
52PX3J2U
52PX3J3U
52PX3J9U
119.00
137.00
137.00
137.00
*****
52PX3J2UY
52PX3J3UY
52PX3J9UY
––––– 1
151.00
151.00
151.00
600V transformer with 6V 755 type less operating head
lamp, or 6V LED
chrome red
1 3/4" (44.5 mm)
chrome green
chrome amber
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX3KNU
52PX3K2U
52PX3K3U
52PX3K9U
119.00
137.00
137.00
137.00
*****
52PX3K2UY
52PX3K3UY
52PX3K9UY
––––– 1
151.00
151.00
151.00
16
less operating head
chrome red
chrome green
chrome amber
full red
full green
full amber
24V Full Voltage with 757 type, or
24V LED
1 3/4" (44.5 mm)
CONTROL
PRODUCTS
Pilot Devices
1) Blocks cannot be interchanged (start-stop circuit).
2) LED color must match lens color.
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-203
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Selector Switch Complete Units
Selection and ordering data
Version
Lever type
Contact
blocks
Cam1)
Order no.
List
Price
Pack
$
unit
Selector Switches with 2 switching positions
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO
1 NC
1 NO + 1 NC
A
A
A
52SX2AABK1
52SX2AABJ1
52SX2AABA1
42.50 1
42.50
55.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO
1 NC
1 NO + 1NC
A
A
A
52SW2AABK1
52SW2AABJ1
52SW2AABA1
42.50 1
42.50
55.00
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO
1 NC
1 NO + 1 NC
A
A
A
52SX2ACBK1
52SX2ACBJ1
52SX2ACBA1
59.00 1
59.00
72.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO
1 NC
1 NO + 1NC
A
A
A
52SW2ACBK1
52SW2ACBJ1
52SW2ACBA1
59.00 1
59.00
72.00
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SX2CABA1
52SX2GABJ2K1
52SX2CABA2
55.00 1
67.00
80.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SW2CABA1
52SW2GABJ2K1
52SW2CABA2
55.00 1
67.00
80.00
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SX2CCBA1
52SX2GCBJ2K1
52SX2CCBA2
72.00 1
84.00
96.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SW2CCBA1
52SW2GCBJ2K1
52SW2CCBA2
72.00 1
84.00
96.00
Spring return from right & left operation Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SX2CDBA1
52SX2GDBJ2K1
52SX2CDBA2
72.00 1
84.00
96.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SW2CDBA1
52SW2GDBJ2K1
52SW2CDBA2
72.00 1
84.00
96.00
Short lever, non-Illuminated
Short lever, non-Illuminated
Short lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SX2CBBA1
52SX2GBBJ2K1
52SX2CBBA2
72.00 1
84.00
96.00
Long lever, non-Illuminated
Long lever, non-Illuminated
Long lever, non-Illuminated
1 NO + 1 NC
2 NC + 1 NO
2 NO + 2 NC
C
G
C
52SW2CBBA1
52SW2GBBJ2K1
52SW2CBBA2
72.00 1
84.00
96.00
Maintained operation
Short lever assembled
selector switch
Long lever assembled
selector switch
Spring return from right operation
Selector Switches with 3 switching positions
Maintained operation
CONTROL
PRODUCTS
16
Spring return from right
Pilot Devices
Spring return from left
1) For contact operation, see cam selection table on page 16-209.
16-204
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Indicator Light Operators
Selection and ordering data
Version
Color of actuator
Order no.
List
Price
Order no.
List Price Pack
Operators
with Incandescent lamp $
Operators
with LED
lamp 3)
$
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
52PX4B2
52PX4B3
52PX4B9
52PX4BN
52PX4C2
52PX4C3
52PX4C9
52PX4CN
52PX4D2
52PX4D3
52PX4D9
52PX4DN
52PY4E2
52PY4E3
52PY4E9
52PY4EN
72.00
72.00
72.00
66.00
72.00
72.00
72.00
66.00
72.00
72.00
72.00
66.00
72.00
72.00
72.00
66.00
52PX4B2Y
52PX4B3Y
52PX4B9Y
****
86.00 1
86.00
86.00
–––––
1
52PX4D2Y
52PX4D3Y
52PX4D9Y
****
52PX4E2Y
52PX4E3Y
52PX4E9Y
****
86.00 1
86.00
86.00
–––––
86.00 1
86.00
86.00
–––––
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
52PX4G2
52PX4G3
52PX4G9
52PX4GN
52PX4H2
52PX4H3
52PX4H9
52PX4HN
52PX4T2
52PX4T3
52PX4T9
52PX4TN
52PX4J2
52PX4J3
52PX4J9
52PX4JN
52PX4K2
52PX4K3
52PX4K9
52PX4KN
88.00
88.00
88.00
82.00
88.00
88.00
88.00
82.00
88.00
88.00
88.00
82.00
88.00
88.00
88.00
82.00
88.00
88.00
88.00
82.00
52PX4G2Y
52PX4G3Y
52PX4G9Y
****
52PX4H2Y
52PX4H3Y
52PX4H9Y
****
52PX4J2Y
52PX4J3Y
52PX4J9Y
****
52PX4K2Y
52PX4K3Y
52PX4K9Y
****
52PX4T2Y
52PX4T3Y
52PX4T9Y
****
102.00
102.00
102.00
–––––
102.00
102.00
102.00
–––––
102.00
102.00
102.00
–––––
102.00
102.00
102.00
–––––
102.00
102.00
102.00
–––––
240V with 120V 2.5W 120MB type lamp,or 120V
LED
red
green
amber
less lens
52PY4N2
52PY4N3
52PY4N9
52PY4NN
72.00
72.00
72.00
66.00
52PX4N2Y
52PX4N3Y
52PX4N9Y
****
86.00 1
86.00
86.00
–––––
Color code table
blue
clear
white
Unit
Indicator light with plastic lens Full voltage type AC/DC1)2)
Indicator light
6-8V with 755 type, or 6V LED
12V with 756 type
24V with 757 type, or 24V LED
120V with 120MBtype, or 120V LED
Indicator light with plastic lens Transformer type AC/DC1)2)
120V with 6V 755 type lamp, or 6V LED
240V with 6V 755 type lamp, or 6V LED
600V with 6V 755 type lamp, or 6V LED
1
CONTROL
PRODUCTS
480V with 6V 755 type lamp, or 6V LED
1
16
277V with 6V 755 type lamp, or 6V LED
1
1
1
Indicator light with plastic lens Resistor type AC/DC *
5
A
B
5
A
B
Pilot Devices
1) All illuminated devices come with std. Touch-safe shield per UL stds.
2) For factory installed glass lens, replace the 5th character with "5".
Discount Schedule PILO
3) LED color must match lens color. Consult Factory for Neon types.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-205
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Push to Test Units
Selection and ordering data
Version
Color of
actuator
Contact
blocks
Order no.
List
Price
Operators
with Incandescent
lamp3)
Push to test/illuminated
pushbutton
$
Order no.
List
Price
Pack
Operators
with LED
lamp 2)3)
$
Unit
Illuminated pushbutton/Push to test
indicator plastic lens - Full indicator
light with plastic lens - Full voltage type
AC/DC1)
6-8V with 755 type, or 6V LED
red
green
amber
less lens
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
52PX6B2A
52PX6B3A
52PX6B9A
52PX6BNA
96.00
96.00
96.00
91.00
52PX6B2AY
52PX6B3AY
52PX6B9AY
****
110.00 1
110.00
110.00
–––––
24V with 757 type, or 24V LED
red
green
amber
less lens
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
52PX6D2A
52PX6D3A
52PX6D9A
52PX6DNA
96.00
96.00
96.00
91.00
52PX6D2AY
52PX6D3AY
52PX6D9AY
*****
110.00 1
110.00
110.00
–––––
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
red
green
amber
less lens
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX6G2A
52PX6G3A
52PX6G9A
52PX6GNA
52PX6H2A
52PX6H3A
52PX6H9A
52PX6HNA
52PX6J2A
52PX6J3A
52PX6J9A
52PX6JNA
52PX6K2A
52PX6K3A
52PX6K9A
52PX6KNA
112.00
112.00
112.00
107.00
112.00
112.00
112.00
112.00
112.00
112.00
112.00
107.00
112.00
112.00
112.00
107.00
52PX6G2AY
52PX6G3AY
52PX6G9AY
*****
52PX6H2AY
52PX6H3AY
52PX6H9AY
*****
52PX6J2AY
52PX6J3AY
52PX6J9AY
*****
52PX6K2AY
52PX6K3AY
52PX6K9AY
*****
126.00
126.00
126.00
–––––
126.00
126.00
126.00
–––––
126.00
126.00
126.00
–––––
126.00
126.00
126.00
–––––
120V with 24V 757 type lamp, or 24V LED red
green
amber
less lens
240V with 24V 757 type lamp, or 24V LED red
green
amber
less lens
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
1 NC + 1 NO
52PX6M2A
52PX6M3A
52PX6M9A
52PX6MNA
52PX6N2A
52PX6N3A
52PX6N9A
52PX6NNA
96.00
96.00
96.00
96.00
96.00
96.00
96.00
91.00
52PX6M2AY
52PX6M3AY
52PX6M9AY
*****
52PX6N2AY
52PX6N3AY
52PX6N9AY
****
110.00 1
110.00
110.00
–––––
110.00 1
110.00
110.00
–––––
Illuminated pushbutton/Push to test
plastic lens indicator light with plastic
lens - Transformer type AC/DC1)
120V with 6V 755 type lamp, or 6V LED
240V with 6V 755 type lamp, or 6V LED
480V with 6V 755 type lamp, or 6V LED
CONTROL
PRODUCTS
16
600V with 6V 755 type lamp, or 6V LED
1
1
1
1
Illuminated pushbutton/Push to test
indicator indicator light with plastic lens
- Resistor type AC/DC
Color code table
bl u e
clear
white
5
A
B
5
A
B
Wiring Diagrams
Push to Test
Pilot Devices
Illuminated push button
1) All illuminated devices come with std. Touch-safe shield per UL stds.
2) LED color must match lens color. Consult Factory for Neon types.
16-206
3) For factory installed lens guard add suffix "Y".
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Push to Test Units
Selection and ordering data
Flush pushbutton operator
Extended pushbutton operator
Mushroom head pushbutton
operator
Version
Color of actuator
Order no.
Pushbutton with flush cap
black
red
green
yellow
52PX8A1
52PX8A2
52PX8A3
52PX8A4
22.00
22.00
22.00
22.00
blue
gray
orange
less cap
kit - with all colors
52PX8A5
52PX8A6
52PX8A8
52PX8
52PX8AN
22.00
22.00
22.00
20.50
25.50
black
red
green
yellow
52PX8B1
52PX8B2
52PX8B3
52PX8B4
22.00
22.00
22.00
22.00
blue
gray
orange
less cap
kit - with all colors
52PX8B5
52PX8B6
52PX8B8
52PX8
52PX8BN
22.00
22.00
22.00
20.50
25.50
black
red
green
yellow
52PX9D1
52PX9D2
52PX9D3
52PX9D4
46.50
46.50
46.50
46.50
blue
gray
orange
less cap
kit - with all colors
52PX9D5
52PX9D6
52PX9D8
52PX9
52PX9DN
46.50
46.50
46.50
38.50
49.00
black
re d
green
yellow
52PX9E1
52PX9E2
52PX9E3
52PX9E4
55.00
55.00
55.00
55.00
blue
gray
orange
less cap
kit - with all colors
52PX9E5
52PX9E6
52PX9E8
52PX9
52PX9EN
55.00
55.00
55.00
38.50
49.00
black
red
green
52PX2W1
52PX2W2
52PX2W3
63.00
63.00
63.00
1
black
red
green
52PX2V1
52PX2V2
52PX2V3
82.00
82.00
82.00
1
Pushbutton with extended cap
Pushbutton with mushroom cap
1 5/ 8" ( 41 . 3 mm )
Large Plastic Mushroom Head, 2 1/4" (57.2mm)
$
Unit
1
1
1
CONTROL
PRODUCTS
2 position push pull maintained, non illuminated
Small Plastic Mushroom Head, 1 5/8" (41.3mm)
Pack
16
Pushbutton with mushroom cap
2 1/ 2" ( 63 . 5 mm )
List
Price
1
Pilot Devices
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-207
Pushbutton Units and Indicator Lights
30 mm, Black Max Corrosion Resistant, Class 52
Selector Switch Operators
Selection and ordering data
Version
Lever type
Color of
Cam1) Order no.
lever insert
List
Price
Pack
$
unit
Selector Switches with 2 switching positions
Maintained operation
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
A
A
52SX2AAB
52SW2AAB
30.50 1
30.50
Spring return from right operation
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
A
A
52SX2ACB
52SW2ACB
47.00 1
47.00
Maintained operation
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
white
white
white
white
white
white
white
white
B
B
C2)
C2)
D
D
E
E
G
G
52SX2BAB
52SW2BAB
52SX2CAB
52SW2CAB
52SX2DAB
52SW2DAB
52SX2EAB
52SW2EAB
52SX2GAB
52SW2GAB
30.50 1
30.50
30.50
30.50
30.50
30.50
30.50
30.50
30.50
30.50
Spring return from right operation
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
white
white
white
white
white
white
white
white
B
B
C2)
C2)
D
D
E
E
G
G
52SX2BCB
52SW2BCB
52SX2CCB
52SW2CCB
52SX2DCB
52SW2DCB
52SX2ECB
52SW2ECB
52SX2GCB
52SW2GCB
47.00 1
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
Spring return from left operation
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
white
white
white
white
white
white
white
white
B
B
C2)
C2)
D
D
E
E
G
G
52SX2BBB
52SW2BBB
52SX2CBB
52SW2CBB
52SX2DBB
52SW2DBB
52SX2EBB
52SW2EBB
52SX2GBB
52SW2GBB
47.00 1
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
Spring return from left and right operation Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
Short lever, non-Illuminated
Long lever, non-Illuminated
white
white
white
white
white
white
white
white
white
white
B
B
C2)
C2)
D
D
E
E
G
G
52SX2BDB
52SW2BDB
52SX2CDB
52SW2CDB
52SX2DDB
52SW2DDB
52SX2EDB
52SW2EDB
52SX2GDB
52SW2GDB
47.00 1
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
47.00
white
white
H
H
52SX2HAB
52SW2HAB
30.50 1
30.50
CONTROL
PRODUCTS
16
Selector Switches with 3 switching positions
Selector Switches with 4 switching positions
Pilot Devices
Maintained operation
Non-Illuminated, Short lever
Non-Illuminated, Long lever
1) For contact operation, see cam selection table
on page 16/209.
2) C- Cam is limited to 4 contact blocks, 1 or 2 pole,
SR only.
16-208
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Cam Selection
Selection and ordering data
Ordering Information
• Contact blocks are ordered separately, see page 16-213.
• Under Selector Position find the selector operation required (2 or 3 position).
• Select the contact operation required for each selector lever position (X indicates when contacts areclosed).
• The cam letter column identifies the cam of the selector operator.
• Contact block must be assembled in position shown for each circuit application.
• Cam D, E or G may be ordered at the same price by changing the 6th character of the selector catalog
number. Example: Selector with D cam 51SA2DA.
• C Cam on spring return selectors is limited to 4 contact blocks.
• Selector operators in enclosures are limited to depth of 1 contact block. (2 blocks wide).
Cam Contact block
letter catalog no.
Lever or key operators (viewed from front)
Selector
position
Lever position (X indicates contact closed)
2
X
O
Illuminated
X
O
Left
Right
Left
3
A
52BAJ (NC)
52BAK (NO)
L
L
O
X
A
52BAJ (NC)
52BAK (NO)
L
L
B
52BAK (NO)
52BAK (NO)
52BAJ (NC)
52BAJ (NC)
2 - 52BAK* (NO)
52BAJ (NC)
52BAK (NO)
52BAJ (NC)
52BAK (NO)
52BAK (NO)
52BAJ (NC)
52BAJ (NC)
52BAJ (NC)
52BAK (NO)
Center
Right
O
O
X
X
O
O
O
X
O
O
X
O
X
O
O
X
O
X
X
O
X
O
X
O
O
O
O
X
O
O
X
O
O
X
O
X
R
R
Right
C
D
E
G
C
B
Left center Right center
X
O
O
O
Right
or
or
52BAJ (NC)
52BAK (NO)
52BAK (NO)
52BAJ (NC)
R
L
L
L
L
L
L
L
L
L
L
and
or
or
or
or
or
or
R
R
R
R
R
R
R
R
L
or
R
R
CONTROL
PRODUCTS
Left
4
Left
O
X
16
X
O
X
O
X
X
O
O
O
X
O
X
O
O
Illuminated
X
O
O
O
Mounting
(viewed from front)
L
L
R
R
Right
O
X
O
O
O
O
X
O
O
O
O
X
Left
N
D
N
Right
D
X
X
O
O
X
O
X
X
O
O
O
X
X
O
O
X
X
O
X
O
O
O
O
O
O
X
X
X
O
O
O
O
X
X
O
X
O
X
O
X
H
52BAK (NO)
52BAJ (NC)
52BAJ (NC)
52BAK (NO)
R
L
R
L
Selector pushbutton operators
2
3
Center
P
R
52BAK (NO)
52BAJ (NC)
52BAJ (NC)
52BAK (NO)
R
L
R
L
L
L
L
or
or
R
R
Pilot Devices
Left
Q
R
R
L
Right
N
D
N
D
N
D
X
X
O
O
X
O
X
O
O
X
O
O
O
X
O
X
O
O
O
O
O
O
X
X
L
R
R
S
L
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-209
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Custom Selector Switch Designs
Selection and ordering data
Assembled Non-illuminated Selector Switches
• Determine contact block and location from above.
• Additional suffixes allow for multiple quantities and locations.
• Select block suffix. Ex: J = 52BAJ.
• Repeat process for next block if required.
• Now select position suffix.
• Add list price of blocks to operator list price.
• 1-52BAJ block mounted on right side, suffix will be J 1.
• Consult factory for delivery.
X O O
O O X
HAND-OFF-AUTO Maintained Switch
Catalog No 52SA2CAB A
1 = 52A2CABA1
(52BJK block mounted on right side)
Example 1:
Block Suffix
Position Suffix
Example 2:
A = 1 NO - 1 NC, 52BJK
E = NC Late Break, 52BAE
H = NO Early Make, 52BAH
J = NC, 52BAJ
K = NO, 52BAK
Suffix
0
1
2
3
4
5
6
7
8
9
X O O
O X O
O O X
}
J2
K1 = 52SA2GABJ2K1
Pilot Devices
CONTROL
PRODUCTS
16
G Cam required
Catalog No 52SA2GAB
52BAJ (L)
J2
52BAJ (R)
52BAK (L or R) } K1
16-210
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Quantity and Location
Left
Right
1
—
—
1
1
1
2
—
—
2
2
1
1
2
2
2
3
—
—
3
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Accessories and Spare Parts
Selection and ordering data
Version
Suitable for
Flush actuator button
Order no.
For flush type,
non-illuminated pushbuttons
black
red
green
yellow
blue
gray
orange
kit- all colors
52RA1A1
52RA1A2
52RA1A3
52RA1A4
52RA1A5
52RA1A6
52RA1A8
52RA1AN
1.60
1.60
1.60
1.60
1.60
1.60
1.60
11.20
Extended actuator button
For extended type,
non-illuminated pushbuttons
black
red
green
yellow
blue
gray
orange
1 of each color cap
52RA1B1
52RA1B2
52RA1B3
52RA1B4
52RA1B5
52RA1B6
52RA1B8
52RA1BN
1.60
1.60
1.60
1.60
1.60
1.60
1.60
11.20
Mushroom head - Plastic
For small 1 5/8"(41.3mm) type,
non-illuminated mushroom pushbuttons
and push-pull; set screw
black
red
green
yellow
blue
gray
orange
1 of each color cap
52RB3D1
52RB3D2
52RB3D3
52RB3D4
52RB3D5
52RB3D6
52RB3D8
52RB3DN
8.20
8.20
8.20
8.20
8.20
8.20
8.20
65.60
Mushroom head - Metal
For small 1 5/8"(41.3mm) type,
non-illuminated push-pull; set screw
chrome
red
green
52RB3FC
52RB3F2
52RB3F3
17.80
17.80
17.80
Mushroom head - Plastic
For large 2 1/2"(63.5mm) type,
non-illuminated mushroom pushbuttons
and push-pull; set screw
black
red
green
yellow
blue
gray
orange
1 kit of each color cap
52RB3E1
52RB3E2
52RB3E3
52RB3E4
52RB3E5
52RB3E6
52RB3E8
52RB3EN
16.40
16.40
16.40
16.40
16.40
16.40
16.40
131.00
Illuminated mushroom head
Illuminated metal
For 1 3/4" illuminated mushroom head
pushbuttons; threaded
red
green
amber
52RB3H2
52RB3H3
52RB3H9
18.00
18.00
18.00
green
red
amber
52RB3JG
52RB3JR
52RB3JA
18.00
18.00
18.00
Replacement Lens for Pilot Lights
Plastic lens
red
green
blue
amber
clear
white
52RA4P2
52RA4P3
52RA4P5
52RA4P9
52RA4PA
52RA4PB
5.80
5.80
5.80
5.80
5.80
5.80
Glass lens
red
green
blue
amber
clear
white
52RA4G2
52RA4G3
52RA4G5
52RA4G9
52RA4GA
52RA4GB
22.50
22.50
22.50
22.50
22.50
22.50
Replacement Lens for Push to test/Illuminated pushbuttons
Plastic lens
red
green
blue
amber
clear
white
52RA5P2
52RA5P3
52RA5P5
52RA5P9
52RA5PA
52RA5PB
5.80
5.80
5.80
5.80
5.80
5.80
Pilot Devices
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
CONTROL
PRODUCTS
Discount Schedule PILO
List
Price
$
16
Color
Illuminated plastic
Lamp
voltage
16-211
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Accessories and Spare Parts
Selection and ordering data
Version
Suitable for
Lamp Color
voltage
Order no.
List
Price
$
Replacement lens kit for
Illuminated selector switches
Knob & Insert
red
green
blue
amber
clear
white
52RA6P2
52RA6P3
52RA6P5
52RA6P9
52RA6PA
52RA6PB
5.80
5.80
5.80
5.80
5.80
5.80
Lever inserts
Short lever
red
green
blue
yellow
gray
orange
white
red
green
blue
yellow
gray
orange
white
52RA2A2
52RA2A3
52RA2A5
52RA2A4
52RA2A6
52RA2A8
52RA2AB
52RA2B2
52RA2B3
52RA2B5
52RA2B4
52RA2B6
52RA2B8
52RA2BB
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
red
green
blue
amber
clear
white
52RA7P2
52RA7P3
52RA7P5
52RA7P9
52RA7PA
52RA7PB
5.80
5.80
5.80
5.80
5.80
5.80
Long lever
CONTROL
PRODUCTS
16
Replacement lens for compact style pilot lights
Replacement lenses
Clear protective boot
Offers protection from ice and foreign
substances from interfering with button
operation
Flush pushbutton operators
52AABA
16.40
Pushbutton guard
Prevents accidental operation of the
pushbutton
Lens guard
Non-Illuminated pushbuttons
Black Max styles, non-Illuminated pushbuttons
Push to test buttons and pilot lights
52AAGP
52AXGP
8.20
8.20
52AAGL
8.20
Black Max styles, push to test buttons
and pilot lights
52AXGL
8.20
Guard for mushroom head
Additional hole spacing is required on
adjacent devices
1 5/8"(41.3mm) mushroom head pushbutton and push-pull operators
Black Max styles,1 5/8"(41.3mm) mushroom head pushbutton and push-pull
operators
52AAGM
33.00
52AXGM
33.00
Pushbutton locknut
Replacement front ring
Pushbutton and push-to-test device
Black Max styles
52AANP
52AXNP
2.70
2.70
Push-pull/pilot light locknut
Replacement front ring
Selector switch locknut
Replacement front ring
Padlock attachments
52AANL
52AXNL
52AANS
52AXNS
52AALA
52AALB
52AALS
2.70
2.70
2.70
2.70
24.50
24.50
49.00
52AALE
47.00
Spare keys
Grounding kit
Touchsafe shield
Mushroom head and pilot light indicators
Black Max styles
Selector switch
Black Max styles, selector switch
Flush pushbutton operators
Extended operators1)
Pushbuttons, selector switches, and nonilluminated mushroom heads
Pushbuttons, selector switches, and
illuminated mushroom heads
All devices
Corrosion resistant
Steel, gray
Stainless steel
501CH (1 key)
All devices
Illuminated devices (Current revisions only)
52MAWB
52AAH6
52ABH6
52ABHS
D28671015
52AL109145
52AASH
24.50
8.20
8.20
24.50
5.60
4.20
2.40
Black boot
Rubber gasket (5)
Yellow 90 mm ESTOP ring
Extended or flush pushbuttons
All devices
All E-Stops
52AAB1
52AAD
52AAR
16.40
2.40
4.50
Padlock cover
Can be used to lock devices in the off
position
Pilot Devices
Lock nut wrench
Hole plugs
1) Must be used with step raised cap- 52PA8C2.
16-212
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Accessories and Spare Parts
Selection and ordering data
Version
Suitable for
Lamp
voltage
Color
Order no.
List
Price
$
Lamps with screw connection, miniature bayonet (BA 9s style)
Incandescent lamps,
Flashing, type 267 lamp (replaces 755 lamp)
51, 52
6V type 755 lamp
51, 52
12V type 756
51, 52
24V type 757
51, 52
120V, 2.5W, type #120MB
52
Neon (uses resistors) type B2A (NE-51H)
52
48V
51, 52
Candelabra, 120 V, Full voltage type 3S6/51)
7 Watts
52 older revision styles
LED’s BA9s Style
length 28 mm
diameter 10 mm
current 15 ma
1 NC extra late break
1 NO
1 NC
6 V UC
6 V UC
6 V UC
6 V UC
6 V UC
red
green
yellow
white
blue
52AEB2
52AEB3
52AEB4
52AEBB
52AEB5
22.50
22.50
22.50
22.50
22.50
52
52
52
52
52
24 V UC
24 V UC
24 V UC
24 V UC
24 V UC
red
green
yellow
white
blue
52AED2
52AED3
52AED4
52AEDB
52AED5
22.50
22.50
22.50
22.50
22.50
52
52
52
52
52
120 V AC
120 V AC
120 V AC
120 V AC
120 V AC
red
green
yellow
white
blue
52AEE2
52AEE3
52AEE4
52AEEB
52AEE5
22.50
22.50
22.50
22.50
22.50
52
52
52
6 V UC
6 V UC
6 V UC
red
green
yellow
52AEB27
52AEB37
52AEB47
28.00
28.00
28.00
52
52
52
24 V UC
24 V UC
24 V UC
red
green
yellow
52AED27
52AED37
52AED47
28.00
28.00
28.00
52
52
52
120 V AC red
120 V AC green
120 V AC yellow
52AEE27
52AEE37
52AEE47
28.00
28.00
28.00
White
Red
Black
Green
Yellow
___
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAR2)
12.40
12.40
24.50
12.40
12.40
49.50
Blue
52BAU
52BAKE
52BAJE
12.40
15.40
15.40
1) Design change made in 2003 from candelabra to
BA 9s type bulbs. Contact technical support for
further information.
Discount Schedule PILO
closes before 52BAK
opens after 52 BAJ
Reed switch
UL listed for class 1 division 2
.25A Max, 200V AC, 10 Watt max
.5A Max, 200V DC, 10 Watt max
Not touch safe
Not touch safe
8.20
Plunger Color
Pilot Devices
52 BAR
52AAENC
CONTROL
PRODUCTS
52 BAK
1 NO
1 NC
1 NO - 1 NC
1 NO early make
1 NC late break
1 NO - 1 NC
120 V
12.40
8.20
8.20
7.50
8.20
16.90
12.50
52
52
52
52
52
Touchsafe contact blocks with gold flashing
52 BAJ
52AABNF
52AABN
52AACN
52AADN
52AAENC1
52AAPN
3SB1902-1AP
16
LED's, cluster type
For use with Class 52 pilot lights only
(7 LED’s)
6 V AC
6 V AC
12 V AC
24 V AC
120V AC
120 V AC
48 V
2) Hermetically sealed.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-213
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Dimensional Drawings
Dimension drawings, inch (mm)
Contact block
Non-illuminated momentary pushbutton flush,
extended, styles with one contact block
1.00 (25)
1.64 (42)
.03 (1)
Contact Block.eps file missing
1.05 (27)
2.11 (54)
.39 (10)
.39 (10)
.39 (10)
2 position maintained
non-illuminated
2 position maintained
push-pull illuminated
Small mushroom
head momentary pushbutton
3 position maintained
non-illuminated
3 position maintained
push-pull illuminated
Pilot Devices
CONTROL
PRODUCTS
16
Large mushroom
head momentary pushbutton
16-214
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Dimensional Drawings
Dimension drawings, inch (mm)
Pilot light
full voltage and transformer
Push to test illuminated pushbutton
Selector switches and keyed selector switches
illuminated and non-illuminated
Selector push operator
2 button maintained operator
Maintained toggle operator
16
CONTROL
PRODUCTS
Pilot Devices
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-215
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Class 52 Oiltight Pushbutton Station
Selection and ordering data
Actuator identification
C = top device in station
B = middle device in station
A = bottom device in station
Degree of protection
Contact / voltage
No. of Order no. List
command
Price
points
A = Momentary flush pushbutton black, label "START"
NEMA 12
1NO - 1NC
1
52C101A
131.00
$
NEMA 12
1NO - 1NC
1
52C103A
131.00
A = Momentary mushroom head red, label "STOP"
NEMA 12
1NO - 1NC
1
52C104A
155.00
A = Maintained metal mushroom head red, label
"EMERGENCY STOP"
NEMA 12
1NO - 1NC
1
52C117A
183.00
A = 2 position selector switch "OFF-ON"
NEMA 12
1NO - 1NC
1
52C159A
140.00
A = 3 position selector switch "HAND-OFF-AUTO"
NEMA 12
1NO - 1NC
1
52C156A
140.00
A = Indicator light, red
NE M A 1 2
120V Transformer
type
1
52C131A
155.00
A = Indicator light, green
NE M A 1 2
120V Transformer
type
1
52C135A
155.00
A = Momentary flush pushbutton black, label "START"
NEMA 4X Stainless Steel 1NO - 1NC
1
52C101S
209.00
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Stainless Steel 1NO - 1NC
1
52C103S
209.00
A = Momentary mushroom head red, label "STOP"
NEMA 4X Stainless Steel 1NO - 1NC
1
52C104S
233.00
A = Maintained metal mushroom head red, label
"EMERGENCY STOP" (metal head)
NEMA 4X Stainless Steel 1NO - 1NC
1
52C116S
249.00
A = 2 position selector switch "OFF-ON"
NEMA 4X Stainless Steel 1NO - 1NC
1
52C159S
216.00
A = 3 position selector switch "HAND-OFF-AUTO"
NEMA 4X Stainless Steel 1NO - 1NC
1
52C156S
216.00
A = Momentary flush pushbutton black, label "START"
NEMA 4X Fiberglass
1NO - 1NC
1
52C101X
159.00
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Fiberglass
1NO - 1NC
1
52C103X
159.00
A = Momentary mushroom head red, label "STOP"
NEMA 4X Fiberglass
1NO - 1NC
1
52C104X
183.00
A = Maintained metal mushroom head red, label
"EMERGENCY STOP" (metal head)
NEMA 4X Fiberglass
1NO - 1NC
1
52C116X
199.00
A = 2 position selector switch "OFF-ON"
NEMA 4X Fiberglass
1NO - 1NC
1
52C159X
166.00
A = 3 position selector switch "HAND-OFF-AUTO"
NEMA 4X Fiberglass
1NO - 1NC
1
52C156X
166.00
B = Momentary flush pushbutton black, label "START"
2 unit control A = Momentary raised pushbutton red, label "STOP"
NEMA 12
1NO, 1NC
1NO, 1NC
2
52C201A
189.00
B = Momentary flush pushbutton green, label "START"
A = Momentary Mushroom head pushbutton red,
label "STOP"
NEMA 12
1NO, 1NC
1NO, 1NC
2
52C202A
213.00
B = Momentary flush pushbutton, label "FORWARD"
A = Momentary flush pushbutton, label "REVERSE"
NEMA 12
1NO, 1NC
1NO, 1NC
2
52C204A
189.00
B = Momentary flush pushbutton, label "UP"
A = Momentary flush pushbutton, label "DOWN"
NEMA 12
1NO, 1NC
1NO, 1NC
2
52C223A
200.00
B = Indicator light, red, label "RUN"
A = Maintained selector switch, label
"HAND-OFF-AUTO"
NEMA 12
120V Transformer
type
2
52C224A
249.00
B = Indicator light, red
A = Indicator light, green
NEMA 12
120V Transformer
type
2
52C230A
255.00
B = Momentary flush pushbutton black, label "START"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
2
52C201S
265.00
B = Momentary flush pushbutton green, label "START"
A = Momentary Mushroom head pushbutton red, label
"STOP"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
2
52C202S
290.00
B = Momentary flush pushbutton, label "UP"
A = Momentary flush pushbutton, label "DOWN"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
2
52C223S
265.00
B = Indicator light, red, label "RUN"
NEMA 4X Stainless Steel 120V Transformer
A = Maintained selector switch, label "HAND-OFF-AUTO"
type
1NO, 1NC
2
52C224S
314.00
B = Momentary flush pushbutton black, label "START"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
2
52C201X
225.00
B = Momentary flush pushbutton green, label "START"
A = Momentary Mushroom head pushbutton red, label
"STOP"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
2
52C202X
249.00
B = Momentary flush pushbutton, label "UP"
A = Momentary flush pushbutton, label "DOWN"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
2
52C223X
225.00
120V Transformer
type
1NO, 1NC
2
52C224X
274.00
station
Pilot Devices
CONTROL
PRODUCTS
16
1 unit control
A = Momentary raised pushbutton red, label "STOP"
station
B = Indicator light, red, label "RUN"
NEMA 4X Fiberglass
A = Maintained selector switch, label "HAND-OFF-AUTO"
16-216
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Pack
Unit
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Class 52 Oiltight Pushbutton Station
Selection and ordering data
Contact / voltage
No. of Order no. List
command
Price
points
C = Indicator light, red
NEMA 12
3
52C307A
279.00
B = Momentary flush pushbutton black, label "START"
A = Momentary raised pushbutton red, label "STOP"
120V
1NO, 1NC
1NO, 1NC
1NO, 1NC
C = Momentary flush pushbutton black, label "FORWARD" NEMA 12
B = Momentary flush pushbutton black, label "REVERSE"
A = Momentary raised pushbutton red, label "STOP"
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C301A
255.00
C = Momentary flush pushbutton black, label "UP"
B = Momentary flush pushbutton black, label "DOWN"
A = Momentary raised pushbutton red, label "STOP"
NEMA 12
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C332A
265.00
C = Momentary flush pushbutton black, label "OPEN"
B = Momentary flush pushbutton black, label "STOP"
A = Momentary raised pushbutton red, label "CLOSE"
NEMA 12
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C333A
265.00
C = Momentary flush pushbutton black, label "HI"
B = Momentary flush pushbutton, black label "LOW"
A = Momentary raised pushbutton red, label "STOP"
NEMA 12
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C334A
265.00
C = Indicator light, red
NEMA 4X Stainless Steel 120V
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C307S
413.00
C = Momentary flush pushbutton black, label "FORWARD" NEMA 4X Stainless Steel 1NO, 1NC
B = Momentary flush pushbutton black, label "REVERSE"
1NO, 1NC
A = Momentary raised pushbutton red, label "STOP"
1NO, 1NC
3
52C301S
372.00
C = Momentary flush pushbutton black, label "UP"
B = Momentary flush pushbutton black, label "DOWN"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C332S
372.00
C = Momentary flush pushbutton black, label "OPEN"
B = Momentary flush pushbutton black, label "STOP"
A = Momentary raised pushbutton red, label "CLOSE"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C333S
372.00
C = Momentary flush pushbutton black, label "HI"
B = Momentary flush pushbutton, black label "LOW"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Stainless Steel 1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C334S
372.00
C = Indicator light, red
B = Momentary flush pushbutton black, label "START"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Fiberglass
120V
1NO, 1NC
1NO, 1NC
3
52C307X
331.00
C = Momentary flush pushbutton black, label "FORWARD" NEMA 4X Fiberglass
B = Momentary flush pushbutton black, label "REVERSE"
A = Momentary raised pushbutton red, label "STOP"
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C301X
290.00
C = Momentary flush pushbutton black, label "UP"
B = Momentary flush pushbutton black, label "DOWN"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C332X
290.00
C = Momentary flush pushbutton black, label "OPEN"
B = Momentary flush pushbutton black, label "STOP"
A = Momentary raised pushbutton red, label "CLOSE"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C333X
290.00
C = Momentary flush pushbutton black, label "HI"
B = Momentary flush pushbutton, black label "LOW"
A = Momentary raised pushbutton red, label "STOP"
NEMA 4X Fiberglass
1NO, 1NC
1NO, 1NC
1NO, 1NC
3
52C334X
290.00
$
3 unit control
station
B = Momentary flush pushbutton black, label "START"
A = Momentary raised pushbutton red, label "STOP"
Pack
Unit
CONTROL
PRODUCTS
Degree of protection
16
Actuator identification
Pilot Devices
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-217
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Empty Enclosures
Selection and ordering data
Version
Nu m b e r o f
command
points
Degree of
protection
Order No.
Standard enclosures come with 2 1/4" leg
center for legend spacing. Automotive
end plates require 2 1/2 " spacing. For
more than 2 contact blocks on the right or
left, use extra deep enclosure.
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
6
6
6
9
9
9
12
12
12
16
16
16
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 4/4X Fiberglass
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 4/4X Fiberglass
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 4/4X Fiberglass
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 4/4X Fiberglass
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
NEMA Type 12/13
NEMA Type 12/13 extra deep
NEMA Type 4/4X stainless steel
P30EMS01
P30EMS01D
P30EMS014
P30EMS01X
P30EMS02
P30EMS02D
P30EMS024
P30EMS02X
P30EMS03
P30EMS03D
P30EMS034
P30EMS03X
P30EMS04
P30EMS04D
P30EMS044
P30EMS04X
P30EMS06
P30EMS06D
P30EMS064
P30EMS09
P30EMS09D
P30EMS094
P30EMS12
P30EMS12D
P30EMS124
P30EMS16
P30EMS16D
P30EMS164
Mounting hole arrangement
1 thu 4 are in one row
6 holes are 3 down and 2 across
9 holes are 3 down and 3 across
12 holes are 4 down and 3 across
16 holes are 4 down and 4 across
List
Price
Pack
$
Unit
82.00
82.00
148.00
98.00
91.00
102.00
155.00
115.00
107.00
102.00
213.00
131.00
131.00
149.00
279.00
153.00
165.00
189.00
410.00
215.00
243.00
509.00
289.00
328.00
616.00
371.00
421.00
812.00
CONTROL
PRODUCTS
16
Order Form
Ordering Information
A
B
C
D
1
2
Order No./Item No.
• Select enclosure
3
4
Enclosure Hole Arrangement
• Vertical or Horizontal. Outline Diagram at left starting at the
top left-hand corner. Example: 3 unit vertical outline location
No. 1A, 2A and 3A. 3 unit horizontal outline location No. 1A,
1B, and 1C
Customer
• List location No. and applicable catalog numbers in the table
below. Use complete catalog numbers where possible
Enclosure Catalog No.
Operator
PB-SEL.-PL
Accessories
Key Lock, Boot, Etc,
Legend Plate
Legend or Blank
Special Marking
Pilot Devices
Location
To order non-standard control stations select catalog numbers
from the previous pages, determine the required position in the
enclosure and fill in the table below. If a special legend plate is
required, specify description in the table. The combined list
prices of the components is the list price of the station.
16-218
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Discount Schedule PILO
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Legend Plates for Class 51 & 52
Design
The 30 mm legend plates are approved for the use with both Class 51 and Class 52 devices. Automotive legend plates require 2 1/2" mounting
centers. Plastic legend plates will have white letters ingraved.
When ordering custom engraved legend plates, specify the required inscription text. See page 16-218.
Selection and ordering data
Inscription
2
1 1/4
2
1 5/8
2 7/16
Large
List
Automotive1)
List
Large Plastic2) List
Automotive Plastic1)2) List
(1 7/16" x 2")
Price
(2 7/16" x 2 7/16")
Price
(1 7/16" x 2")
Price
(2 7/16" x 2 7/16")
Price
Order No.
$
Order No.
$
Order No.
$
Order No.
$
—
52ND02R
52ND02B
––––
2.40
2.40
—
52NE02R
52NE02B
––––
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
4.20
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
––––
CONTROL
PRODUCTS
4.20
4.20
4.20
16
52NL02
2.40
52NA02
"Blank (brushed aluminum)"
"Blank (red)"
52NL02R
2.40
52NA02R
"Blank (Black)"
52NL02B
2.40
52NA02B
Inscribed legend plates with large brushed aluminum background
Close
52NL18
2.40
52NA18
Down
52NL10
2.40
52NA10
Emerg Stop
52NL16
2.40
52NA16
Emerg Stop (red)
52NL16R
2.40
52NA16R
Fast-Slow
52NL33
2.40
52NA33
Forward
52NL05
2.40
52NA05
For-Off-Rev
52NL38
2.40
52NA38
For-Rev
52NL31
2.40
52NA31
Hand-Off-Auto
52NL37
2.40
52NA37
High
52NL07
2.40
52NA07
High-Low
52NL30
2.40
52NA30
52NL44
2.40
52NA44
High-Off-Low
In
52NL21
2.40
52NA21
Jog
52NL13
2.40
52NA13
Jog-Forward
52NL24
2.40
52NA24
Jog-Reverse
52NL25
2.40
52NA25
52NL08
2.40
52NA08
Low
Lower
52NL20
2.40
52NA20
Man-Auto
52NL35
2.40
52NA35
Off
52NL12
2.40
52NA12
Off-On
52NL26
2.40
52NA26
On
52NL11
2.40
52NA11
On-Off-Auto
52NL40
2.40
52NA40
Open
52NL17
2.40
52NA17
Open-Close
52NL34
2.40
52NA34
Out
52NL22
2.40
52NA22
Pull to Start and Push to Stop 52NL47
2.40
52NA47
Raise
52NL19
2.40
52NA19
Raise-Lower
52NL36
2.40
52NA36
Reset
52NL14
2.40
52NA14
Reverse
52NL06
2.40
52NA06
Run
52NL23
2.40
52NA23
Run-Jog
52NL29
2.40
52NA29
52NL27
2.40
52NA27
Safe-Run
Slow-Off-Fast
52NL39
2.40
52NA39
Start
52NL03
2.40
52NA03
Start-Jog
52NL28
2.40
52NA28
Start-Stop
52NL32
2.40
52NA32
Stop
52NL04
2.40
52NA04
Stop (red)
52NL04R
2.40
52NA04R
Up
52NL09
2.40
52NA09
Up-Down
52NL49
2.40
52NA49
Up-Off-Down
52NL42
2.40
52NA42
Open-Off-Close
52NL41
2.40
52NA41
Inscription plates with custom engraving
52NL02E
10.70
52NA02E
12.40
—
––––
—
––––
52NL02RE
52NL02BE
10.70
10.70
52NA02RE
52NA02BE
12.40
12.40
52ND02RE
52ND02BE
10.70
10.70
52NE02RE
52NE02BE
12.40
12.40
Max. number of rows
Letter height
Characters per row
2
5/32"
14
2
1/4"
16
2
5/32"
14
Pilot Devices
"Custom engraved
(brushed aluminum)"
"Custom engraved (red)"
"Custom engraved (Black)"
2
1/4"
16
1) Automotive requires 2 1/2" mounting centers
2) White letters on plastic nameplate.
Discount Schedule PILO
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
16-219
Pushbutton Units and Indicator Lights
30 mm Heavy Duty, Watertight/Oiltight, Class 52
Dimensional Drawings
Hole Arrangement
Standard 4-Way
Type 4X Non-Metallic
.190
(5)
1.210
(31)
.672
(17)
CONTROL
PRODUCTS
16
Type 12/13 and 4X Stainless Steel
Enclosure Size
Units
1
2
3
4
6
9
12
162)
A
3.50
5.75
8.00
10.25
9.50
9.50
11.75
11.75
Mounting
B
(89)
(146)
(203)
(260)
(241)
(241)
(298)
(298)
3.25
3.25
3.25
3.25
6.25
8.50
8.50
10.75
C
(83)
(83)
(83)
(83)
(159)
(216)
(216)
(273)
Overall
G
2.75
2.75
2.75
2.75
3.00
3.00
3.00
3.00
(70)
(70)
(70)
(70)
(76)
(76)
(76)
(76)
4.00
6.25
8.50
10.75
10.00
10.00
12.25
12.25
H
(102)
(159)
(216)
(273)
(254)
(254)
(311)
(311)
2.38
2.38
2.38
2.38
5.38
7.62
7.62
9.88
L
(60)
(60)
(60)
(60)
(137)
(194)
(194)
(251)
W
4.50
6.75
9.00
11.25
10.50
10.50
12.75
12.75
(114)
(171)
(229)
(286)
(267)
(267)
(324)
(324)
3.47
3.47
3.47
3.47
6.47
8.72
8.72
10.97
J
(88)
(88)
(88)
(88)
(164)
(221)
(221)
(279)
2.31
2.31
2.31
2.31
2.56
2.56
2.56
2.56
T
(59)
(59)
(59)
(59)
(65)
(65)
(65)
(65)2)
X
3.00 (76)
3.00 (76)
3.00 (76)
3.00 (76)
6.00 (152)
8.25 (210)
8.25 (210)
10.50 (267)
1.73 (44)
1.73 (44)
1.73 (44)
1.73 (44)
2.11 (54)
2.11 (54)
2.11 (54)
2.11 (54)
Y
1.86 (47)
1.86 (47)
1.86 (47)
1.86 (47)
2.61 (66)
2.61 (66)
2.61 (66)
2.61 (66)
Type 12/13 Extra Deep Enclosures
Enclosure Size
Units
A
1
2
3
4
6
9
12
162)
4.00
6.00
8.00
10.00
9.50
9.50
B
4.00
4.00
4.00
4.00
6.25
8.50
1
Mounting
Overall
C
G
H
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.75
4.50
6.50
8.50
10.50
10.00
10.00
12.25
12.25
3.12
3.12
3.12
3.12
5.38
7.62
7.62
9.88
L
W
5.00
7.00
4.22
4.22
11.00
4.22
J
T
4.31
4.31
4.31
4.31
4.31
3.75
3.75
3.75
3.75
6.00
8.25
8.25
10.50
10.50
12.75
4.31
4.31
10.97
X
Y
2.11
2.11
2.11
2.11
2.11
1.98
1.86
1.73
2.11
2.61
2.11
2.61
Type 4X Non-Metallic
Enclosure Size
Pilot Devices
Units3)
1
2
3
4
A
6.00
6.00
8.26
10.51
All dimensions shown in inches and (millimeters). For
reference purposes only. Not to be used for design or
construction purposes.
16-220
Mounting
Overall
B
C
G
H
L
W
3.19
3.19
3.19
3.19
3.63
3.63
3.63
3.63
4.88
4.88
7.13
9.37
2.94
2.94
2.94
2.94
6.63
6.63
8.88
3.81
3.81
3.81
1) Grounding stud in body of enclosure.
2) For stainless steel add 1.75 (45) to depth.
3) No flange for mounting.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
17SPEEDFAX
TM
2007-2008 Standby Generators
Contents
Sandby Power Systems Introduction
17-2
Standby Generators
17-3
Standby Generator Controllers
17-4
Portable Generators
17-5
Transfer Switches
17-6
“SR” Type Transfer Switches
17-7
“X” Type Transfer Switches
Manual Transfer Interlock Kits
17-8
17-9 – 17-10
17
STANDBY
GENERATORS
Residential Commercial Industrial
Standby Power Systems
NEW
Standby Power Systems
General
Siemens offers a complete line of standby power systems. From standby power generators, portable generators, transfer
switches, and manual transfer kits, Siemens has all of your back up power needs covered. You can count on Siemens to
deliver high quality, industry leading designs. Our standby generators are designed for quiet operation with sound
attenuated enclosures, specially designed fans and radiators, and a high tech enclosure material that provides excellent
sound absorption.
Standby Generators
▪ Powered by natural gas or liquid propane vapor
▪ Permanently attached to the house via a fuel line and conductors hard
wired to the load center
▪ Completely automatic – detects power outages and switches power
over to the generator (automatic transfer switch required)
▪ Restores power to pre-selected circuits or entire building
▪ Returns power to utility once restored
▪ Self tests weekly
▪ Available in 7 to 150 kW units, single and three phase
Automatic Transfer Switches
▪ Completes the automatic system
▪ Once activated by the generator controller, switches load to
and from generator
▪ Available in 100 to 800A versions, single and three phase,
indoor and outdoor
STANDBY
GENERATORS
17
Portable Generators
▪ Gasoline fueled
▪ 15 and 17.5 kW units available, single phase
▪ Provided with 7 various receptacles and circuit protection
Mechanical Interlock Kits
▪ Interlocks two main breakers together (generator and utility) such that
both cannot be “ON” at the same time
▪ Wide variety of kits available to convert most Siemens load centers
and meter combinations into standby power panels
For more information including a detailed selection and application guide, generator sizing guides, cut sheets, detailed
dimensions, owner’s manuals, and other useful information, visit our web site at www.sea.siemens.com/generators.
For technical support, call (800) 844-0029.
17-2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Standby Power Systems
Standby Generators
Selection
7 through 150 kW
1-Phase, 120/240 Volts AC
3-Phase, 120/208 Volts AC
3-Phase, 277/480 Volts AC
Features and Ratings
UL 2200 Listed
Natural gas or liquid propane vapor options
Composite mounting pad provided on air cooled units
Automatic Transfer Switch compatibility:
Air cooled units compatible with “ST” and “SR” type
20-60 kW units compatible with “SR” type
70-150 kW units compatible with “X” type
▪ 16 kW units and larger are provided with the patented
Quiet Test™ feature. This feature allows the generator
to run at lower RPM’s during the weekly test cycle,
greatly reducing noise pollution.
▪ Rugged, textured paint finish provides superior corrosion
resistance
▪ Aluminum enclosure option ideal for harsh environments
▪
▪
▪
▪
Liquid Cooled Generator
Air Cooled Generator
Catalog Logic Table
Siemens
Standby
Generator
kW
Rating
Generator Information
Voltage
R=120/240, 1Ø
C=120/208, 3Ø
I = 277/480, 3Ø
Fuel
G=Natural Gas
P =Propane
B=Accepts both
Dimensions
(inches)
Enclosure
A=Aluminum
S=Steel
Controller
Type
Cooling
System
Transfer
Switch
Compatible
007
R
B
S
48 x 24 x 29
R
Air
ST, SR
SG
010
R
B
S
48 x 24 x 29
R
Air
ST, SR
SG
013
R
B
S
48 x 24 x 29
R
Air
ST, SR
R
Air
ST, SR
016
R
B
S, A
SG
018
R, C
B
S, A
72 x 30 x 38
R
Liquid
SR
SG
020
R, C
B
S, A
72 x 30 x 38
R
Liquid
SR
SG
025
R,C
B
S, A
72 x 30 x 38
R
Liquid
SR
SG
035
R, C, I
B
S, A
77 x 34 x 46
R
Liquid
SR
SG
045
R, C, I
B
S, A
77 x 34 x 46
R
Liquid
SR
SG
060
R, C, I
G, P
S, A
89 x 34 x 48
R
Liquid
SR
SG
070
R, C, I
G, P
S, A
97 x 37 x 47
H
Liquid
X
SG
080
R, C, I
G, P
S, A
116 x 37 x 55
H
Liquid
X
H
Liquid
X
SG
100
R, C, I
G, P
S, A
116 x 37 x 55
SG
130
R, C, I
G, P
S, A
116 x 37 x 55
H
Liquid
X
SG
150
R, C, I
G, P
S, A
116 x 37 x 55
H
Liquid
X
Catalog number example
Requirements:
1. Standby Generator
2. 35 kW
3. 3-Phase, 120/208 V~
4. Natural Gas
5. Aluminum Enclosure
1
2
3
4
5
SG
035
C
B
A
STANDBY
GENERATORS
SG
48 x 24 x 29
Example = SG035CBA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
17
SG
17-3
Standby Power Systems
Standby Generator Controllers
Selection
Siemens standby generators are provided with controllers. The primary purpose of the controller is to monitor utility power,
operate the automatic transfer switch, control the weekly self test cycle, and to monitor the generator for any potential system
faults. There are two types of controllers, the “R” and “H” types.
“R” Type Controller
The “R” type controller is provided on all 7 through 60 kW generators. These
controllers are compatible with the “ST” and “SR” type transfer switches.
Built in governor control is provided, along with LED displays for potential
system faults.
The automatic transfer switch, which is sold separately, is controlled by the R
controller.
Control Functions
Full system monitoring
▪ Oil Pressure
▪ Coolant Temperature
▪ Engine Speed
▪ Coolant Level
▪ Cranking Time
▪ Starter Lockout
▪ Utility Sensing
▪ Quiet Test™
LED Indicators
▪ Over Speed
▪ Over Crank
▪ Low Oil Pressure
▪ High Coolant Temperature
▪ Low Coolant Level
▪ Low Fuel Pressure
▪ Low Battery Voltage
▪ Quiet Test™ Control
“H” Type Controller
17
The “H” type controller is provided on all 70 through 150 kW generators.
These controllers are compatible with the “X” type transfer switches.
STANDBY
GENERATORS
Control Functions
All R control functions plus:
▪ Full range standby operation
▪ Full system status
- 3Ø AC Volts and current
- Alternator frequency
- kW, kVA, power factor
- Fuel pressure
- Alarms and warnings
- Transfer switch status
- Operating hours
- Service reminders
- Trending
- Utility Sensing
▪ Fault protection for generator
windings
▪ 3Ø sensing voltage regulator
▪ Isochronous speed regulation
17-4
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
System Features
▪ Two 4-line 20-character LCD
displays
▪ Engine governor and voltage
regulator built into controller
▪ Hermetically sealed circuit board in
a die-cast aluminum enclosure
▪ Waterproof connections
▪ Audible alarm
▪ Service-friendly diagnostics
▪ Built in PLC for user I/O’s
▪ Integrated automatic transfer switch
controller for Siemens “X” type
transfer switches
▪ Advanced engine sensors eliminate
false signals and interference
▪ Quiet-Test™ control
▪ Industry standard 2-wire start
Standby Power Systems
Portable Generators
Selection
Portable Generators
Portable generators are contained in a steel frame with wheels for
easy relocation. The generators are powered by gasoline stored in a
provided gas tank. These generators are ideal for locations where
space or local codes do not allow a permanently installed standby
generator. They are also great for construction site temporary power,
eliminating the need for temporary power poles and utility hook ups.
Features and Ratings
▪ Provided with 7 receptacles
- 12V DC, 10A
- 120V AC, 20A Duplex
- 120V AC, 20A Duplex GFCI
- 120V AC, 30A Locking Type (2)
- 120/240V AC, 30A Locking Type
- 120/240V AC, 50A
Full
pressure lubrication
▪
Single
point lifting
▪
▪ Spin-on oil filter
▪ Automatic idle control
▪ Dimensions (in): 39 x 31 x 49
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
16 gallon fuel tank
Low oil pressure shutdown
Solid state voltage regulator
GFCI protection
Anti-vibration system
Circuit breakers included
Battery charge cables
Maintenance free battery
Full 1-1/4" tubular frame
Wheel kit
Electronic governor
Tune-up kit
Catalog Number
PG015
PG017 햲
Rated Power
15 kW
17.5 kW
Surge
22.5 kW
26.2 kW
Rated Amps @ 60Hz
120/240, 1Ø, 1.0 pf
62.5
73.0
Engine RPM
3,600
3,600
Engine Cooling
Air
Air
Fuel Capacity (gallons)
16
16
Dimensions (inches)
39 x 31 x 49
39 x 31 x 49
Weight (lbs)
450
475
Manual Transfer Kit 햲
Standby and Portable Generator Maintenance Kits
Description
Usage
GENMKIT1
Oil and air filter kit
7 kW
GENMKIT2
Oil and air filter kit
10 kW
GENMKIT3
Oil and air filter kit
13, 16 kW
GENMKIT4
Oil and air filter kit
20 kW
GENMKIT5
Oil and air filter kit
25 kW
GENMKIT6
Oil and air filter kit
35, 45 kW
GENMKIT7
Oil and air filter kit
60 kW
GENMKIT8
Oil and air filter kit
70, 80, 130, 150 kW
GENMKIT9
Oil and air filter kit
100 kW
GENPAINT
Touch up paint
All devices
PORTMKIT1
Oil and air filter kit
Portable 15, 17.5 kW
햲
The 17.5 kW portable generator is provided with a
manual transfer kit. The kit includes a load center
(G2020L1125CU), factory installed interlock kit
(ECSBPK01), a 50A utility main, 50A generator main, a
STANDBY
GENERATORS
Catalog Number
17
Maintenance Kits
Generators require routine servicing just like any other engine. It is
recommended that the oil and filters be changed once a year, or every
100 hours of use, which ever comes first. Maintenance kits are
provided for each engine type and include and oil filter, air filter, spark
plugs, and tools.
mixture of branch circuits, a 15' power cord, and an
inlet box as shown. The kit is not sold separately and is
not provided on the 15 kW portable generator.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
17-5
Standby Power Systems
Transfer Switches
Selection
Automatic Transfer Switches
There are 3 types of transfer switches. “ST” type transfer switches are provided with branch circuits are compatible with the
air cooled generators. “SR” type are compatible with generators containing the “R” type controller (7-60 kW). The “X” type
transfer switches are compatible with the “H” type controller (70-150 kW generators).
Transfer Switch Catalog Number Logic
Transfer Type
Enclosure Type
T=Indoor
R=Outdoor
Amperage
Voltage
R=120/240V 1Ø
C=120/208 3Ø
I = 277/480V 3Ø
S
T
100
R
S
R
100, 200
R
S
R
100, 200
R, C, I
S
R
400
R, C
R, T
100, 150, 200, 300,
400, 600, 800
R, C, I
X
“ST” Type Transfer Switches
Transfer Switches With Back Up Circuits
Siemens offers 3 models of automatic transfer switches with back up circuits.
These panels provide transfer capability to a select number of critical circuits, as
opposed to the entire house. For the chosen critical circuits, the conductors in the
main house panel are removed from the breaker and connected with wire nuts to
the pre-wired conductors on the transfer switch.
STANDBY
GENERATORS
17
Features and Ratings
UL 1008 Listed
100A
120/240, 1Ø
Indoor NEMA Type 1
Open Transition
10KAIC
Express install kit included
Dimensions (inches) 27 x 13 x 7
Conduit length: 30 feet from ATS to junction box, 5 feet from
junction box to generator, 2 feet from ATS to load center
▪ Suitable for use only on air cooled products (7-16 kW)
▪
▪
▪
▪
▪
▪
▪
▪
▪
Breakers Provided
Catalog Number
Q250
Q240
ST100R12 (12 ckt)
ST100R10 (10 ckt)
ST100R16 (16 ckt)
17-6
1
1
1
Q230
Q220
Q120
Q115
Suggested Use
1
1
3
3
10 kW Generators
3
5
13 kW Generators
5
5
16 kW Generators
1
1
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Service Disconnect
D=Provided
Branch Circuits
Included
10, 12, 16
D
D
Standby Power Systems
“SR” Type Transfer Switches
Selection
Features and Ratings
▪
▪
▪
▪
▪
▪
▪
UL 1008 Listed
100-400A
Outdoor NEMA Type 3R
1-Phase and 3-Phase
Open Transition
Service entrance rated option
Compatible with “R” type controllers found in 7-60 kW generators
Voltage
Catalog
Number
Amp
SR100R
100
SR100RD
100
SR100C
100
SR100I
100
SR200R
200
SR200RD
200
SR200C
200
SR200I
200
SR400R
400
SR400RD
400
SR400C
400
120/240
1Ø
120/208
3Ø
NEMA
277/480
3Ø
•
•
1
3R
12
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Service
Disconnect
Included
•
•
•
100*
200
200*
400
400*
120/240 1Ø
120/208 3Ø
277/480 3Ø
120/240 1Ø
120/240 1Ø
120/208 3Ø
277/480 3Ø
120/240 1Ø
120/240 1Ø
120/208 3Ø
120/240 1Ø
Withstand Rating
1Ø
3Ø
10 kAIC
14 kAIC
10 kAIC
10 kAIC
25 kAIC
10 kAIC
Dimensions
12/240 & 120/208
277/480
24 x 20 x 7
36 x 24 x 10
24 x 13 x 7
24 x 15 x 7
48 x 30 x 12
24 x 13 x 7
Weight (lbs)
120/240 1Ø
120/208 3Ø
277/480 3Ø
31
49
95
39
31
49
105
40
400
277/480 3Ø
18 kAIC
18 kAIC
18 kAIC
36 x 24 x 10
40 x 30 x 10
35 kAIC
48 x 30 x 12
88
107
100
105
* Service entrance rated, main disconnect provided (type QP for 100A, QN for 200A).
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
17-7
STANDBY
GENERATORS
100
Voltage
17
AMPS
Standby Power Systems
“X” Type Transfer Switches
Selection
Catalog
Number
Amp
XT100R
100
XT100C
100
XT100I
100
XR100R
100
XR100C
100
XR100I
100
XT150R
150
XT150C
150
XT150I
150
XR150R
150
XR150C
150
XR200I
200
XT200R
200
XT200C
200
XT200I
200
XR200R
200
XR200C
200
XR200I
200
XT300R
300
XT300C
300
XT300I
300
XR300R
300
XR300C
300
XR300I
300
XT400R
400
XT400C
400
XT400I
400
XR400R
400
XR400C
400
XR400I
400
17
XT600R
600
XT600C
600
STANDBY
GENERATORS
Features and Ratings
XT600I
600
XR600R
600
XR600C
600
XR600I
600
XT800R
800
XT800C
800
XT800I
800
XR800R
800
XR800C
800
XR800I
800
UL 1008 Listed
100-800A
Indoor NEMA Type 1 and 12
Outdoor NEMA Type 3R
1-Phase and 3-Phase options
Open Transition
Compatible with “H” type controllers
found in 70-150 kW generators
▪ 7 day programmable exerciser
▪
▪
▪
▪
▪
▪
▪
120/240
1Ø
Voltage
120/208
3Ø
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NEMA
277/480
3Ø
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3R
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
12
•
•
•
•
•
•
AMPS
Voltage
100
120/240 1Ø
120/208 3Ø
277/480 3Ø
150
120/240 1Ø
120/208 3Ø
277/480 3Ø
200
120/240 1Ø
120/208 3Ø
277/480 3Ø
300
120/240 1Ø
120/208 3Ø
277/480 3Ø
400
120/240 1Ø
120/208 3Ø
277/480 3Ø
600
120/240 1Ø
120/208 3Ø
277/480 3Ø
800
120/240 1Ø
120/208 3Ø
277/480 3Ø
NEMA Rating
1 / 3R
1 / 3R
1 / 3R
1 / 3R
1 / 3R
12 / 3R
12 / 3R
14 kAIC
14 kAIC
10 kAIC
25 kAIC
10 kAIC
25 kAIC
18 kAIC
35 kAIC
18 kAIC
35 kAIC
42 kAIC
42 kAIC
65 kAIC
65 kAIC
36 x 24 x 10
36 x 24 x 10
36 x 24 x 10
48 x 30 x 12
36 x 24 x 10
48 x 30 x 12
36 x 24 x 10
48 x 30 x 12
36 x 24 x 10
48 x 30 x 12
66 x 36 x 20
66 x 36 x 20
66 x 36 x 20
66 x 36 x 20
105
120
110
145
110
145
130
165
130
165
650
650
680
680
Withstand Rating
120/240 & 120/208
277/480
Dimensions
120/240 & 120/208
277/480
Weight (lbs)
120/240 & 120/208
277/480
17-8
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Standby Power Systems
Manual Transfer Interlock Kits
Selection
Manual Transfer Interlock Kits
These interlock kits are used to interlock two main breakers
in a load center or meter combination together so that both
cannot be “ON” at the same time. This is required to
prevent dangerous feedback between the two power
systems. These kits work on most Siemens load centers
and meter combinations.
Description
Catalog Number
Breaker Types
Utility / Standby
Attaches to two double
pole circuit breakers
across from one another
as shown
ECSBPK01
QP / QP
Attaches to two double
pole circuit breakers side
by side to one another as
shown
ECSBPK02
QP / QP
Used on Ultimate main
breaker load centers
150-225A as shown
ECSBPK03
MBK / QP
Used on Ultimate main
breaker load centers
100-125A as shown
ECSBPK04
MBK / QP
Attaches to type QN main
breakers and double pole
breakers as shown
ECSBPK05
QN / QP
Attaches to type QNR
main breakers and
double pole breakers as
shown
ECSBPK06
QNR / QP
Image
Standard Features
▪ UL listed for use in most Siemens load centers and
meter combinations
▪ Suitable for use with optional standby systems in
accordance with article 702 of the National Electric
Code®
▪ Corrosion resistant finish
▪ Easy assembly requiring no modifications to the load
center or meter combination
▪ Remains attached to the main breakers when load
center cover is removed
Misapplications
Follow all directions and precautions detailed in the
instructions sheets. Do not use the interlock kits in
such a manner that power is not prevented from being
fed back to the utility lines when the utility main
breaker is in the “OFF” position. Examples would be
meter combinations in which the conductors from the
meter land on lugs, as opposed to a main breaker
(see below).
17
ECSBPK07
QN(R) / QN(R)
Attaches to two type QNR
or QN main breakers as
shown
ECSBPK08
QPP / QP
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
STANDBY
GENERATORS
Attaches to two type QNR
or QN main breakers as
shown
17-9
Standby Power Systems
Manual Transfer Interlock Kits
Selection
Acceptable Usage of Interelock Kits by Load Center/Meter Combination
STANDBY
GENERATORS
17
Siemens Outdoor Load Centers
W0816B1200CT
3
W0816L1200CT
1
2
W0816ML1125CU
1
2
W1212L1125CU
1
2
4
W1224B1100CU
4
W1224L1125CU
1
2
4
W1224L1200CU
1
2
3
5
W1224L1225CU
1
2
3
5
W1624B1100CU
4
W1624L1125CU
1
2
4
W2020B1100CU
4
W2030L1150CU
1
W2040B1200CU
W2040L1200CU
W3040B1200CU
3
1
3
2
W3040L1125CU
1
2
4
W3040L1200CU
1
2
3
W4040B1200CU
3
W4040L1200CU
1
W4242B1225CU
3
W4242L1225CU
1
2
2
2
3
3
3
3
3
5
5
5
5
5
5
Siemens Meter Combinations
1
2
MC0816B1150RTH
5
7
E1020MB1100FCGP
1
2
MC0816B1150T
5
7
E1224ML1100*
1
2
MC0816B1150TH
5
7
G1212L1125*
1
2
4
MC0816B1200FCTM
2
G1224B1100*
4
MC0816B1200RT
5
7
G1224L1125*
1
2
4
MC0816B1200RTB
5
7
7
G1224L1200CU
1
2
3
MC0816B1200RTH
5
7
7
G1624B1100*
4
MC0816B1200SCTM
2
G1624L1125*
1
MC0816B1200T
5
7
G1630B1150
3
MC0816B1200TH
5
7
G2020B1100*
4
MC0816B1350RLTM
5
7
G2020L1125*
1
MV0816B1400RLTM
5
7
G2030B1150*
3
MC1224B1100FEC
2
G2030L1125CUSG
1
2
4
MC1224B1100SEC
2
G2030L1150*
1
2
3
MC1224B1125
1
G2040B1200*
3
MC1224B1125FEC
2
G2040L1200*
1
MC1224B1125SEC
2
G2424B1100CU
4
MC1632B1100SEC
2
G2424B1125
4
MC1632B1125FEC
2
G2424L1125
1
MC2040B1150
5
7
G2430B1150
3
MC2040B1200
5
7
G2430L1125CUSG
1
MC2040B1200R
5
7
G2440B1200
3
MC2442B1200FEC
2
G2440L1125CU
1
2
4
MC2442B1200SEC
2
G2440L1200*
1
2
3
MC3040B1200SECW
5
G3030B1100CU
4
MC3042B1200FED
3
G3030B1150*
3
MC3042B1200SED
3
G3030L1200*
1
MC3042B1225FED
3
G3040B1200*
3
MC3042B1225SED
3
G3040L1125CU
1
2
4
MC4040B1200SECW
5
G3040L1200*
1
2
3
MC0816B1200RJBT
8
G4040B1200*
3
MC0816B1150RJBT
8
G4040L1125CU
1
2
4
MC0816B1200RCT
8
G4040L1200*
1
2
3
MC0816B1150RCT
8
G4242B1225CU
3
MC0816B1200CT
8
G4242L1225CU
1
MC0816B1150CT
8
MC2040B1150RCT
9
MC2040B1150CT
9
MC2040B1200RCT
9
MC2040B1200CT
9
7
7
7
7
7
7
Notes
▪ Numbers 1 through 9 in these
tables represent the interlock kit
number. Example: 1 = ECSBPK01
▪ Standby power interlock kits are not
intended for use with AFCI, GFCI,
3-pole, or 1⁄2" frame breakers
▪ Standby power interlock kits are not
intended for use with 4 space,
125A load centers
▪ These kits are not intended for
use in meter combination devices
where the conductors coming from
the meter compartment land on
lugs in the load center side, as
opposed to a main breaker.
Examples would include devices
that start with MM0406L,
MM0606L, or MC1212L
17-10
Siemens Indoor Load Centers
E0816ML1125*
2
2
2
2
2
2
2
5
7
4
4
3
5
5
7
7
4
4
3
3
5
5
5
5
5
7
7
7
7
7
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2
7
7
18SPEEDFAX
TM
2007-2008 Technical
Contents
Siemens Design Assistant Disc
Types of Power Distribution Systems
Ground Fault Protection
18-2
18-3 – 18-5
18-6 – 18-12
Overcurrent Protection and Coordination
18-13
System Analysis
18-14
Current Limiting Circuit Breaker Technology
18-15
Series-Connected Combination Ratings
Harmonics / K-factor Ratings
18-16
18-17 – 18-18
Table 1:
Ampacities of Insulated Conductors
18-19
Table 2:
Correction Factors for Ambient Temperatures
18-19
Table 4A:
Motor Full-Load Currents of
Three Phase AC Induction Type Motors
18-20
Table 4B:
Motor Full-Load Currents in Amperes,
Single Phase AC
18-20
Table 4C:
Motor Full-Load Currents in Amperes, DC
18-20
Table 4D:
Conversion Table of Polyphase Design
18-20
Table 5:
Normal-Load and Fault Currents of
Three Phase Transformers
18-20
Table 6:
Electrical Formulas for Finding Amperes,
Horsepower Kilowatts, and kVA
18-21
18
Table 7:
Grounding Electrode Conductor for
18-21
Minimum Size Grounding Conductors for
Grounding Raceways and Equipment
Molded Case Circuit Breakers
Conversion Table
Residential Commercial Industrial
18-21
18-22 – 18-24
18-25
TECHNICAL
AC Systems
Table 8:
Technical
Reference
Siemens Design Assistant Disc
To assist consulting electrical engineers and designers,
Siemens has introduced the Design Assistant. This disc,
available at no charge from your local Consultant Account
Manager, includes tools and reference that will make your job
easier. Some of the contents are:
Design Calculators
▪ Available Fault Current Calculator
▪ Advanced Voltage Drop Calculator
▪ Panelboard Schedule (Excel™ and CADD)
▪ Equipment Sizing Assistant
▪ Conduit Fill Calculator
▪ Circuit Breaker Time Current Curve Program
▪
▪
▪
▪
▪
▪
Basic Lighting Calculator
Switchboard Heat Output Calculator
Switchboard Weight Calculator
TVSS Sizing Assistant
Motor Data Calculator
and more…
Training
▪ Step2000 Training Programs (19 books in all), including
Basics of Electricity, Drives, Panelboards, MCC’s, PLC’s
and Energy Measurement.
Specifications
▪ Specifications in Microsoft Word™ format for all our
Division 16 and Division 26 products (more than 45
sections), including commissioning
TECHNICAL
18
Technical Information
▪ Checklists and Common Forms
▪ CADD Blocks of switchboards
and substations
▪ Technical Information and White Papers
Reference
▪ All our Selection & Application Guides,
brochures, installation manuals, and more
▪ Full pdf versions of our SpeedFax and
Industrial Controls Catalogs
For a copy of the Siemens Design Assistant Disc, contact
your local Consultant Account Manager or Sales Engineer.
18-2
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Technical
Types of Power Distribution Systems
There are several basic considerations
which must be included by the system
design engineer to select and design the
best power distribution system which will
supply power to both present and future
loads most economically. Among these
are:
▪ Safety
▪ Reliability
▪ Maintenance
▪ Flexibility
▪ Voltage Regulation
▪ Initial Investment
▪ Simplicity of Operation
The characteristics of electrical service
available at the building site, the types of
loads, the quality of service required, and
the size and configuration of building are
also important factors that will influence
system design and circuit arrangement.
Four basic circuit arrangements are used
for the distribution of electric power. They
are the radial, primary selective, secondary
selective, and secondary network circuit
arrangements. The following discussion of
these circuit arrangements covers both
the high-voltage and low-voltage circuits.
The reader should recognize that the highvoltage circuits and substations may be
owned by either the utility company or the
building owner, depending upon the
electric rates, the practice, and
requirements of the particular electric
utility serving the specific building site.
Figure 2. Expanded Radial System—Single
Primary Feeder
making it possible to limit outages due to
a feeder or transformer fault to the loads
associated with the faulted equipment. If
circuit breakers are used for primary
feeder protection, the cost of this system
will be high. Even if fused switches are
used, the cost of the arrangement of
Figure 3 will exceed the cost of the
arrangement of Figure 2.
Primary Selective System
The circuit arrangement of Figure 4
provides means of reducing both the
extent and duration of an outage caused
by a primary feeder fault. This operating
feature is provided through the use of
duplicate primary feeder circuits and load
interrupter switches that permit
connection of each secondary substation
transformer to either of the two primary
feeder circuits. Each primary feeder circuit
must have sufficient capacity to carry the
total load in the building.
TECHNICAL
A fault in a primary feeder in the
arrangement shown in Figure 2 will cause
the main protective device to operate and
interrupt service to all loads. If the fault
were in a transformer, service could be
restored to all loads except those served
from that transformer. If the fault were in
a primary feeder, service could not be
restored to any loads until the source of
trouble had been eliminated. Since it is to
be expected that more faults will occur on
the feeders than in the transformers, it
becomes logical to consider providing
individual circuit protection on the primary
feeders as shown in Figure 3. This
arrangement has the advantage of
Figure 3. Expanded Radial Systems
individual Primary Feeder Protection
18
Radial System
If power is brought into a building at
utilization voltage, the simplest and the
lowest cost means of distributing the
power is to use a radial circuit
arrangement. The radial system is the
simplest that can be used, and has the
lowest system investment. It is suitable for
smaller installations where continuity of
service is not critical.
The low voltage service entrance circuit
comes into the building through service
entrance equipment and terminates at a
main switchgear assembly, switchboard or
panelboard. Feeder circuits are provided to
the loads or to other subswitchboards,
distribution cabinets, or panelboards.
Figure 1 shows the two forms of radial
circuit arrangements most frequently
used. Under normal operating conditions,
the entire load is served through the
single incoming supply circuit, and in the
case of high voltage service, through the
transformer. A fault in the supply circuit,
the transformer, or the main bus will
cause an interruption of service to all
loads. A fault on one of the feeder or
branch circuits should be isolated from the
rest of the system by the circuit protective
device on that circuit. Under this
condition, continuity of service is
maintained for all loads except those
served from the faulted circuit.
The need for continuity of service often
requires multiple paths of power supply as
opposed to the single path of power
supply in the radial system.
Selection
Figure 4. Primary Selective Systems
Figure 1. Radial Systems
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-3
Technical
Types of Power Distribution Systems
TECHNICAL
18
Under normal operating conditions, the
appropriate switches are closed in an
attempt to divide the load equally
between the two primary feeder circuits.
Then, should a primary feeder fault occur,
there is an interruption of service to only
half of the load. Service can be restored to
all loads by switching the deenergized
transformers to the other primary feeder
circuit. The primary selective switches are
usually manually operated and outage
time for half the load is determined by the
time it takes to accomplish the necessary
switching. An automatic throwover
switching arrangement could be used to
avoid the interruption of service to half the
load. However, the additional cost of the
automatic feature may not be justified in
many applications. If a fault occurs in a
secondary substation transformer, service
can be restored to all loads except those
served from the faulted transformer.
The higher degree of service continuity
afforded by the primary selective
arrangement is realized at a cost
somewhat higher than a simple radial
system due to the extra primary cables
and switchgear.
Secondary Selective System
Under normal conditions, the secondary
selective arrangement of Figure 5 is
operated as two separate radial systems.
The secondary tie circuit breaker in each
secondary substation is normally open.
The load served from a secondary
selective substation should be divided
equally between the two bus sections. If a
fault occurs on a primary feeder or in a
transformer, service is interrupted to all
loads associated with the faulted feeder or
transformer. Service may be restored to all
secondary buses by first opening the main
secondary switch or circuit breaker
associated with the faulted transformer
and primary feeder, and then closing the
tie breaker. The two transformer
secondary circuit breakers in each
substation should be interlocked with the
secondary tie breaker in such a manner
that all three cannot be in the closed
position simultaneously. This prevents
parallel operation of the two transformers
and thereby minimizes the interrupting
duty imposed on the secondary switching
devices. It also eliminates the possibility of
interrupting service to all loads on the bus
when a fault occurs in either a primary
feeder or a transformer.
The cost of the secondary selective
system will depend upon the spare
capacity in the transformers and primary
feeders. The minimum transformer and
primary feeder capacity will be determined
18-4
Selection
Figure 5. Secondary Selective System
Using Close-Coupled Double-Ended
Substation
Figure 6. Secondary Selective System
Using Two Single-Ended Substations
With Cable or Bus Tie
by essential loads that must be served
under emergency operating conditions. If
service is to be provided for all loads
under emergency conditions, then each
primary feeder should have sufficient
capacity to carry the total load, and each
transformer should be capable of carrying
the total load in each substation.
This type of system will be more
expensive than either the radial or primary
selective system, but it makes restoration
of service to all essential loads possible in
the event of either a primary feeder or
transformer fault. The higher cost results
from the duplication of transformer
capacity in each secondary substation.
This cost may be reduced by shedding
nonessential loads.
A modification of the secondary selective
circuit arrangement is shown in Figure 6.
In this arrangement there is only one
transformer in each secondary substation,
but adjacent substations are
interconnected in pairs by a normally open
low voltage tie circuit. When the primary
feeder or transformer supplying one
secondary substation bus is out of service,
the essential loads on that substation bus
can be supplied over the tie circuit. The
operating aspects of this system are
somewhat complicated if the two
substations are separated by distance.
The best arrangement is to use closecoupled, double-ended substations.
distributed network or a spot network. If
the building demand is in the order of 750
kVA or higher, a spot network will often be
established to serve the building. In
buildings where a high degree of service
reliability is required, and where spot
network supply may not be available, the
distributed secondary network system is
often used. This is particularly true of
institutional buildings such as hospitals.
The network may take the form of several
secondary substations interconnected by
low voltage circuits. However, the most
common practice is to use some form of
the spot network circuit arrangement.
Secondary Network System
Many buildings with radial distribution
systems are served at utilization voltage
from utility secondary network systems.
The network supply system assures a
relatively high degree of service reliability.
The utility network may take the form of a
Figure 7. Simple Spot Network System
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
A simple spot network, such as shown in
Figure 7, consists of two or more identical
transformers supplied over separate
primary feeder circuits. The transformers
are connected to a common low voltage
Technical
Types of Power Distribution Systems
selective switching arrangement with
each transformer, or by using three or
more transformers. If the primary
selective switching arrangement is used,
the total load can be about 160 percent
of the nameplate rating of one of the
transformers. This produces an overload
on one transformer until such time as
the remaining transformer can be
switched to the other feeder in the case
of a primary feeder fault.
The interrupting duty imposed on the
low voltage protective devices in a spot
network substation is higher than in
radial, primary selective, or secondary
selective substations having the same
load capability because of the spare
transformer capacity required in the spot
network substation and because the
transformers are operated in parallel.
Figure 8. Secondary Network System
various load buses. In normal operation,
the substations are about equally loaded
and the current flowing in the tie circuits
is relatively small. However, if a network
protector opens to isolate a transformer
on a primary feeder fault, the load on the
associated bus is then carried by the
adjacent network units and is supplied
over the tie circuits. This arrangement
provides for continuous power supply to
all low voltage load buses, even though a
primary feeder circuit or a transformer is
taken out of service.
In the network arrangement in Figure 9,
if there were three incoming primary
feeder circuits and three transformers,
the combined capacity of two of the
transformers should be sufficient to carry
the entire load on the three substations
on the basis that only one feeder is out
of service at one time. Generally, these
transformers would all have the same
ratings. With this arrangement, as with
the spot network arrangement, a
reduction in spare transformer capacity
can be achieved, if a primary selective
switching arrangement is used at each
substation transformer. However, if three
or more primary feeder circuits are
available, the reduction in transformer
capacity achieved through the use of a
primary selective arrangement may be
small.
Cable ties or busway ties, as shown in
Figures 8 and 9, will require careful
consideration of load distribution during
contingencies and of the safety aspects
with regard to backfeeds. Key or other
mechanical interlocking of switches or
circuit breakers may be essential.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-5
TECHNICAL
The spare transformer capacity, the
network protectors, and the higher
interrupting duty will make the secondary
network arrangement much more
expensive than the other arrangements.
At the same time, these elements make
the reliability of the network system
greater than for the other system
configurations.
The secondary network may also take
the form shown in Figure 8. In this
arrangement there is only one
transformer in each secondary
substation, and the substations are
interconnected by normally closed low
voltage tie circuits. The tie circuits permit
interchange of power between
substations to accommodate unequal
loading on the substations and to provide
multiple paths of power flow to the
Figure 9. Primary Selective Secondary
Network System
18
bus through network protectors and are
operated in parallel. A network protector
is an electrically operated power circuit
breaker controlled by network relays in
such a way that the circuit breaker
automatically opens when power flows
from the low voltage bus toward the
transformer. When voltages in the
system are such that power would flow
toward the low voltage bus from the
transformer, it will close automatically.
Network protectors are normally
equipped with relays which operate for
faults in the network transformer or high
voltage feeder only. The network is often
operated on the assumption that
network failure will “burn” open.
Network protectors without
supplementary protection do not meet
the requirements of the NEC for
overcurrent, ground fault, or short circuit
protection. Protection of the network or
collector bus may be added by providing
sensing devices, including ground fault
detection, with tripping of the network
protectors. The most common use of the
network protector, however, has been by
utilities in vaults where failure of the
network devices could cause damage
limited to the vault. High integrity design
involving wide phase separation and the
use of “catastrophe” fusing minimize the
danger and extent of a network failure. A
conventional circuit breaker with time
overcurrent and instantaneous trip
devices plus network relays can meet
the NEC requirements. However, the full
reliability of the network may be
compromised since selectivity between
these devices is difficult to obtain.
Under normal operating conditions, the
total load connected to the bus is shared
equally by the transformers. Should a
fault occur in a transformer or on a primary feeder, the network protector
associated with the faulted transformer
or feeder will open on reverse power
flow to isolate the fault from the low
voltage bus. The remaining transformer
or transformers in the substation will
continue to carry the load and there will
be no interruption of service to the loads,
except for a voltage dip during the time
that it takes for the protective equipment
to operate.
If only two transformers are used in a
spot network substation, each
transformer must be capable of carrying
the total load served from the low
voltage bus. The amount of spare
transformer capacity in the substation
can be reduced by using a primary
Selection
Technical
TECHNICAL
18
Ground Fault Protection
The term “low magnitude” arcing ground
fault is a deceptive description of this
type fault. What is meant by this is that
the fault current magnitude is low
compared to that of a bolted fault. Even
so, the arc energy released at the point
of the fault can cause much damage and
may result in a fire. A ground fault is an
insulation failure between an energized
conductor and ground. A phase-to-ground
arcing fault, unlike a phase-to-phase
bolted fault, is a high-impedance type
fault. The factors that contribute to this
high impedance are the resistance of the
arc and the impedance of the return path.
This return path is usually metal conduit,
raceway, busway housing or switchboard
frames. Another contributing factor is the
spasmodic nature of the arc. The circuit
breaker or fuse protecting the circuit
detects the fault current, but the actual
ground fault current magnitude is ever
changing due to arc elongating blowout
effects, self-clearing attempts and arc
reignition.
These current limiting effects make the
circuit breaker or fuse incapable of
detecting the actual damage that is
occurring. This is not to imply that these
devices are inadequate. The problem is
one of system protection because the
circuit breaker must be adjusted (or fuse
size selected) so as to hold without
tripping under momentary overload
conditions, such as motor starting current
or transformer inrush current. Therefore,
the circuit breaker or fuse cannot open
quickly enough under relatively low
magnitude faults to limit the arcing
damage.
Figure 10 illustrates the basic problem.
Shown is a typical distribution system
with a 1600 ampere main service
entrance unit with a circuit breaker
(single line “a”) or fused service
protector (single line “b”). A ground fault
of 1500 amperes on the bus would affect
but would not open either device. A 4000
ampere ground fault would be cleared in
approximately 35 seconds by the circuit
breaker and in 230 seconds by the fuse.
To allow a fault of this magnitude to
persist for this length of time would
create more than 92,000 kW seconds of
arc energy. As a result of tests made, it
has been determined that an arc with a
value of 1050 kW seconds of energy
would vaporize about 1.0 cubic in. of
copper or 2.5 cubic in. of aluminum.
Obviously a fault of the magnitude
shown in Figure 10 could cause a
considerable amount of damage.
The nature of low-level arcing ground
faults makes impractical their detection
18-6
Selection
Figure 10. Ground Fault Protection
by a traditional overcurrent devices. To
complete total protection of the system
against all possible types of faults, other
means are utilized to detect ground fault
currents, including:
▪ Zero sequence method
▪ Source ground current (or ground
return) method
▪ Residual connection method
Zero Sequence Method
This is commonly used when ground
fault protection is provided for equipment
employing electromechanical trip
devices. The scheme uses a core
balance type current transformer (ground
sensor) which encircles all phase
conductors (and neutral on four wire
system) to detect ground faults.
The operation of this system is such that
under normal operating conditions (eg.,
no ground fault on the system) there is
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
no output from the ground sensor to the
tripping relay because the vector sum of
all the currents through the sensor
window is zero.
(Ia + lb + Ic + In = 0)
If a ground fault occurs on the system,
there is now an additional current (Ig)
seen by ground sensor which returns to
the source by a path other than through
the sensor window. The sensor now
sees an unbalance caused by Ig and
operates the ground relay which trips the
circuit protector.
(Ia + lb + lc + In = Ig)
The ground sensor is located
downstream from the point at which the
system is grounded and can be mounted
either on the line side or load side of the
main disconnect device. This method can
be used on incoming main disconnect or
on feeders.
Technical
Ground Fault Protection
Source Ground Current (or Ground
Return) Method
This method of detecting the ground
fault current Ig locates the ground
sensor on the neutral connection to
ground at the service entrance. This
means that the ground sensor only
detects ground fault current. This type of
detection has some limitations because
it is detecting the ground fault return
current. On multiple source systems
with multiple connections to ground, this
ground fault current can return by more
than one path, therefore, some
sensitivity in detecting these faults
would be lost.
Residual Connection Method
Current sensors, one on each of the
phase conductors and on the neutral
conductors, are connected in common.
This common (or residual connection)
measures the vector summation of the
phase currents and the neutral current.
Under normal conditions, this vector
summation will be zero, and no current
will be applied to the ground relay.
If a fault involving ground occurs, the
current summation is not equal to zero.
Current flows into common connection
which is applied to the relay. This
method of detecting ground fault current
is used in circuit breakers with electronic
trip device.
Selection
Figure 11. Schematic for Zero Sequence
Figure 12. Schematic for Source Ground Current
GFS = Ground Fault Sensor
GFP = Ground Fault Protection
(Relay or Trip Unit)
Residual Ground Current
Sensing
Figure 13. Schematic for Residual Method
18
TECHNICAL
3-Wire System
This system is used with electronic trip
units, and always includes three current
sensors mounted on the circuit breaker.
A trip element is connected in series
with each sensor to provide phase
overcurrent protection. By adding a
ground trip element in the residual
(neutral) circuit of the three current
sensors, it will sense ground fault current
only, and not load current. This permits
more sensitive settings to protect
against low magnitude ground faults.
This scheme is shown in Figure 14.
Under normal conditions, the vector sum
of the current in all of the phases equals
zero. No current would flow in the GND
element, which is also true under the
condition of a phase-to-phase fault.
A phase-to-ground fault would cause a
current to flow in the GND trip element.
If the magnitude of this current exceeds
the pickup setting for the required time,
the trip unit will operate to trip the
breaker.
Figure 14. Schematic for Ground Protection on 3-Wire Systems, Residual Sensing
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-7
Technical
Ground Fault Protection
4-Wire System
To avoid false tripping, a fourth current
sensor is connected in the neutral
conductor to sense normal neutral
current. This fourth sensor is connected
so that it cancels the normal neutral
current which is developed in the residual
circuit as shown in Figure 15.
Under normal conditions, the vector sum
of the current in all phases equals the
neutral current. Disregarding the effects
of the neutral sensor connection, the
neutral current would flow through the
GND element. Since this is normal
neutral current, pickup of the GND
element is not desired. Therefore, the
neutral sensor is added to sense the
same neutral current as the GND sensor
— but opposite in polarity. The result is a
circulating current between the phase
sensing current sensors and the neutral
sensor, with no current flowing through
the GND sensor. This is similar to a
differential relay circuit. When a phase-toground fault occurs, the vector sum of
the phase currents will no longer equal
the neutral current because the ground
Selection
Figure 15. Schematic for Ground Protection on 4-Wire Systems, Residual Sensing
fault current returns via the ground bus
and bypasses the neutral. If the
magnitude of the phase-to-ground
current exceeds the pickup setting of the
GND element for the required time, the
trip unit will operate to open the breaker.
Types Of Coordinated Ground Fault Tripping Systems
TECHNICAL
18
There are two types of Coordinated
Ground Fault Systems:
▪ Time / Current Selective
▪ Zone Selective (Zone Interlock)
Time / Current Selective
In this system the time / current
characteristics of the Ground Fault
Protection (GFP) devices used with each
disconnect are coordinated so that the
nearest disconnect supplying the ground
fault location will open. Any upstream
disconnects remain closed and continue
to supply the remaining load current. Each
set of GFP devices should have a
specified time-current operating
characteristic. When disconnects are
connected in series, each downstream
device should use a time-current setting
that will cause it to open and clear the
circuit before any upstream disconnect
tripping mechanism is actuated. The timecurrent bands of disconnects in series
must not overlap and must be separated
from each other sufficiently to allow for
the clearing time of each disconnecting
means used. The time / current selective
system is recommended for applications
where damage levels associated with the
time / current settings used are tolerable.
This type of system does not require
18-8
interlocking wiring between the GFP
devices associated with main feeder and
branch disconnecting devices.
Figure 16, on the next page, illustrates
time / current selective coordination in a
system involving a 4000 ampere main
circuit breaker and a 1600 ampere feeder
circuit breaker in an incoming service
switchboard. These feed a distribution
switchboard with a 600 ampere subfeeder to a 100 ampere branch breaker.
The system is coordinated so that only
the circuit breaker nearest the location of
the ground fault trips.
Zone Selective (Zone Interlock)
In this system each disconnecting means
should open as quickly as possible when
a ground fault occurs in the zone where
this disconnect is the nearest supply
source.
The GFP device for an upstream
disconnecting means should have at least
two modes of operation. If a ground fault
occurs between it and the nearest
downstream disconnect, it should operate
in its fast tripping mode.
When a ground fault occurs beyond the
downstream disconnect, the downstream
GFP device should open in its fast
tripping mode and simultaneously
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
send a restraining signal to the upstream
device and transfer that device to a timedelay tripping mode. The upstream timedelay tripping characteristic selected
should be such that the downstream
disconnect will open and clear the circuit
before the upstream disconnect tripping
mechanism is actuated. The time-current
characteristic of the upstream device
should be such as to offer backup
protection in the event of malfunction of
the downstream equipment.
Alternatively, a restraining signal from a
downstream device may be used to
prevent the tripping of an upstream
disconnect on ground fault instead of
causing it to operate in the time-delay
tripping mode. This may be done where
backup protection is less important than
continuity of service to critical loads
supplied by the upstream unit. There are
very few instances in which this is
justified, and a careful study of the entire
system should be made before using this
type of interlocking.
For a zone selective system, the timecurrent bands of disconnects in series,
although used only for backup protection,
should not overlap and should be
separate from each other sufficiently to
allow for the opening time of each
disconnecting means used.
Technical
Ground Fault Protection
Selection
Time/Current Selective Ground Coordination
Figure 17. Zone Interlocking Scheme
The zone selective or zone interlock
scheme is for those few special
applications where exceptionally fast
tripping is necessary for all feeders
throughout the entire system to reduce
damage. Note that although the relay
time can be reduced appreciably, the
circuit breaker mechanism and arcing
time (plus safety margin) will still be
present.
Table 17.1
Typical Ampere
Setting
Restrained
Time Delay
800
400
100
10
0.4 SEC.
0.3 SEC.
0.2 SEC.
0.1 SEC.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-9
TECHNICAL
The zone selective or zone interlock
system provides fast tripping of the
nearest disconnect upstream of the
ground fault. The damage level is the
lowest that is possible because the
ground fault is cleared as quickly as the
protective equipment can respond and
the disconnect can open. Additional
interlocking wiring and circuity for
sending and receiving the restraining
signals are required.
18
Figure 16. Fully Coordinated Multizone GFP System
Zone Selective Operation (Figure 17):
a) Relay-1 will sense a ground fault at
A when it exceeds 10 amperes. It
will instantly initiate tripping of the
Branch breaker and send restraining
signals (transfer from instantaneous
operation to time-delayed operation)
to Relay-2 and Relay-3 (Relay-2 and
Relay-3 will then back up Relay-1 on
a time coordinated basis). Relay-4
will be restrained by Relay-2 if
ground fault exceeds 100 amperes.
b) Relay-2 will sense a ground fault at
B when it exceeds 100 amperes. It
will instantly initiate tripping of the
Sub-Feeder breaker and send
restraining signals to Relay-3 and
Relay-4.
c) Relay-3 will sense a ground fault at
C when it exceeds 400 amperes. It
will instantly initiate tripping of the
Feeder breaker and send a
restraining signal to Relay-4.
d) Relay-4 will sense a ground fault at
D when it exceeds 800 amperes. It
will instantly initiate tripping of the
Main breaker.
Technical
Ground Fault Protection
Typical Application Diagrams
Figures 18 through 23 on this and the
facing page show the basic methods of
applying ground fault protection (GFP).
Other types of distribution systems will
require variations of these methods to
satisfy other system conditions.
These diagrams show circuit breakers as
the disconnects. Any disconnecting
Table 17.2
Selection
means can be utilized, providing it is
suitable for use with a ground fault
protection system as indicated in the
scope of this application guide. The
examples do not show protection against
a ground fault on the supply side of the
main disconnect.
Sensing device and disconnect locations
define zones of protection. Source side
Recommendations for Figures 18-23
Ground
Fault
Protection
On Main
Disconnect Only
On Main and
Feeder
Disconnects
On Main, Feeder,
and Selected
Branch
Disconnects with
Zone Selective
Interlocking
Double-Ended
System with
Protection on
Main and On Tie
and Feeder
Disconnects
Figure
Sensing Method
Additional
Ground
Points
18
Vector
Summation
Must not be downstream.
May be upstream
19
Ground Return
None
20
Main and Feeders–
Vector Summation
Must not be downstream of
main ground fault sensor.
May be upstream.
21
Main – Ground Return
Feeders – Vector
Summation
22
Main and feeders 1-3 –
Vector Summation
MCC branch feeder A –
Zero Sequence
23
Main and Tie – Ground
Return
Feeders – Vector
Summation
Recommended
Use
Limited selectivity depends
on location of fault and rating
of overcurrent devices on the
upstream side of fault.
Improved service continuity
is required
Main will allow feeder to trip
for faults downstream of
feeder sensors, but main will
trip if feeder fails to operate.
None
Must not be downstream of
main ground fault sensor.
May be upstream.
Improved service continuity
and minimum arcing fault
damage are required and
protection is needed on
branch circuits.
Double-ended systems with
ground fault protection on
tie disconnect where
maximum continuity of
service is essential.
None
18
TECHNICAL
18-10
Selectivity
Minimum protection only per
Section 230-95 for the
National Electric Code
Ground Fault Protection on Main Disconnects Only
Figure 18
and ground return sensors provide
protection only on the load side of associated disconnects. If a vector summation
method is used and its sensors are
located on load side of a disconnect, the
zone between a source and actual sensor
location becomes the responsibility of
the next upstream protective device.
Figure 19
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Main and feeder 1-3 will
provide delayed backup
protection if fault is
downstream of MCC branch
feeder A. Main will provide
delayed backup protection if
fault is downstream of sensors
for feeders 1-3. Main will trip
on fastest curve if fault is
upstream of sensors for
feeders 1-3.
When operating with tie
disconnect open, main will
provide delayed backup
protection if fault is
downstream from feeder
sensors. When operating
with the tie disconnect
closed, the tie will trip before
the main, thus sectionalizing
the bus.
Technical
Ground Fault Protection
Selection
Ground Fault Protection on Main and Feeder Disconnects
Figure 20
Figure 21
Ground Fault Protection on Main, Feeder and Selected
Branch Disconnects with Zone Selective Interlocking
Double-Ended System with Ground Fault Protection on
Main and on Tie and Feeder Disconnects
Figure 23
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-11
TECHNICAL
Figure 22
18
Note: Interlocking
Supplementary interlocking is
required but will vary depending
on equipment used.
Technical
Ground Fault Protection
TECHNICAL
18
NEC Requirements for Ground Fault
Protection
230.95 Ground-Fault Protection of
Equipment. Ground-fault protection of
equipment shall be provided for solidly
grounded wye electrical services of
more than 150 volts to ground but not
exceeding 600 volts phase-to-phase for
each service disconnect rated 1000
amperes or more. The grounded
conductor for the solidly grounded wye
system shall be connected directly to
ground without inserting any resistor or
impedance device.
The rating of the service disconnect shall
be considered to be the rating of the
largest fuse that can be installed or the
highest continuous current trip setting
for which the actual overcurrent device
installed in a circuit breaker is rated or
can be adjusted.
Exception No. 1: The ground-fault
protection provisions of this section shall
not apply to a service disconnect for a
continuous industrial process where a
nonorderly shutdown will introduce
additional or increased hazards.
Exception No. 2: The ground-fault
protection provisions of this section shall
not apply to fire pumps.
(A) Setting. The ground-fault protection
system shall operate to cause the
service disconnect to open all
ungrounded conductors of the faulted
circuit. The maximum setting of the
ground-fault protection shall be 1200
amperes, and the maximum time delay
shall be one second for ground-fault
currents equal to or greater than 3000
amperes.
(B) Fuses. If a switch and fuse
combination is used, the fuses employed
shall be capable of interrupting any
current higher than the interrupting
capacity of the switch during a time that
the ground-fault protective system will
not cause the switch to open.
(C) Performance Testing. The groundfault protection system shall be
performance tested when first installed
18-12
Selection
on site. The test shall be conducted in
accordance with instructions that shall
be provided with the equipment. A
written record of this test shall be made
and shall be available to the authority
having jurisdiction.
(FPN No. 1): Ground-fault protection that
functions to open the service disconnect
affords no protection from faults on the
line side of the protective element. It
serves only to limit damage to
conductors and equipment on the load
side in the event of an arcing ground
fault on the load side of the protective
element.
(FPN No. 2): This added protective
equipment at the service equipment may
make it necessary to review the overall
wiring system for proper selective
overcurrent protection coordination.
Additional installations of ground-fault
protective equipment may be needed on
feeders and branch circuits where
maximum continuity of electrical service
is necessary.
(FPN No. 3): Where ground-fault
protection is provided for the service
disconnect and interconnection is made
with another supply system by a transfer
device, means or devices may be
needed to ensure proper ground-fault
sensing by the ground-fault protection
equipment.
(FPN No. 4): See 517.17(A) for
information on where an additional step
of ground fault protection is required for
hospitals and other buildings with critical
areas or life support equipment.
517.17 Ground-Fault Protection.
(A) Applicability. The requirements of
517.17 shall apply to hospitals and other
buildings (including multiple occupancy
buildings) with critical care areas or
utilizing electrical life support equipment,
and buildings that provide the required
essential utilities or services for the
operation of critial care areas or electrical
life support equipment.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
(B) Feeders. Where ground-fault
protection is provided for operation of
the service disconnecting means or
feeder disconnecting means as specified
by 230.95 or 215.10, an additional step
of ground-fault protection shall be
provided in all next level feeder
disconnecting means downstream
toward the load. Such protection shall
consist of overcurrent devices and
current transformers or other equivalent
protective equipment that shall cause
the feeder disconnecting means to open.
The additional levels of ground-fault
protection shall not be installed as
follows:
(1) On the load side of an essential
electrical system transfer switch
(2) Between the on-site generating
unit(s) described in 517.35(B) and
the essential electrical system
transfer switch(es)
(3) On electrical systems that are not
solidly grounded wye systems with
greater than 150 volts to ground
but not exceeding 600 volts
phase-to-phase.
(C) Selectivity. Ground-fault protection
for operation of the service and feeder
disconnecting means shall be fully
selective such that the feeder device,
but not the service device, shall open on
ground faults on the load side of the
feeder device. A six-cycle minimum
separation between the service and
feeder ground-fault tripping bands shall
be provided. Operating time of the
disconnecting devices shall be
considered in selecting the time spread
between these two bands to achieve
100 percent selectivity.
(FPN): See 230.95, fine print note, for
transfer of alternate source where
ground-fault protection is applied.
(D) Testing. When equipment groundfault protection is first installed, each
level shall be performance tested to
ensure compliance with 517.17(C).
Technical
Overcurrent Protection and Coordination
plotted on standard log-log coordination
paper to facilitate the coordination study.
Mechanics Of Achieving Coordination:
The process of achieving coordination
among protective devices in series is
essentially one of selecting individual units
to match particular circuit or equipment
protection requirements, and of plotting
the time/current characteristic curves of
these devices on a single overlay sheet of
log-log coordination paper.
The achievement of coordination is a trialand-error routine in which the various
time / current characteristic curves of the
series array of devices are matched one
against another on the graph plot.
When selecting protective devices one
must recognize ANSI and NEC
requirements and adhere to the limiting
factors of coordination such as load
current, short-circuit current, and motor
starting. The protective devices selected
must operate within these boundaries
while providing selective coordination
where possible. Selective coordination is
usually obtained in low voltage systems
when the log-log plot of time / current
characteristics displays a clear space
between the characteristics of the
protective devices operating in series,
that is, no overlap should exist between
any two time/current characteristics if
full selective coordination is to be
obtained. Allowance must be made for
relay overtravel and for relay and fuse
curve accuracy. Quite often the
coordination study will stop at a point
short of complete selective coordination
because a compromise must be made
between the competing objectives of
maximum protection and maximum
service continuity.
Computer Aided Coordination:
The philosophy discussed above applies
to the “classical” practice of performing
coordination studies manually. Today,
however, there are numerous personal
computer software programs available
for performing coordination studies.
18
TECHNICAL
Coordination of a power distribution
system requires that circuit protective
devices be selected and set so that
electrical disturbances, such as over-loads
or short circuits, will be cleared promptly
by isolating the faulted equipment with
minimum service disruption of the
distribution system. Time / Current
Characteristic Curves are available for
circuit protective devices, such as circuit
breakers and fuses, which show how
quickly they will operate at various values
of overload and short circuit current.
Coordination can be obtained by
comparing these curves for each device in
series in the system.
In developing the system, it will be noted
that many compromises must be made
between the various objectives:
1. System reliability.
2. Continuity of service.
3. Equipment and system protection.
4. Coordination of protective devices.
5. System cost.
Preliminary steps in Coordination study:
A) One-line diagram: used as a base on
which to record pertinent data and
information regarding relays, circuit
breakers, fuses, current transformers, and
operating equipment while at the same
time, providing a convenient
representation of the relationship of circuit
protective devices with one another.
B) Short-circuit study: record all applicable
impedances and ratings; using these
values, a short-circuit study is made to
determine currents available at any
particular point in the system.
C) Determine maximum load currents
which will exist under normal operating
conditions in each of the power-system
circuits, the transformer magnetizing
inrush currents, and times, and the
starting currents, and accelerating times of
large motors. These values will determine
the maximum currents which circuit
protective devices must carry without
operating. The upper boundary of current
sensitivity will be determined by the
smallest values resulting from the
following considerations:
1) Maximum available short-circuit
current obtained by calculation.
2) Requirements of applicable codes
and standards for the protection of
equipment such as cable, motors,
and transformers.
3) Thermal and mechanical limitations
of equipment.
D) Time / current characteristic curves of
all the protective devices to be coordinated must be obtained. These should be
Selection
Figure 24. Coordination of Example System
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-13
Technical
TECHNICAL
18
System Analysis
General
Proper system design requires that the
system be coordinated so the interrupting
capacity and / or short circuit withstand
capabilities of the various components in
the system are not exceeded for any
operating situation. Good practice also
requires that the system be selective, that
is, that the minimum portion of the
system be interrupted on occurrence of a
fault. The need for selectivity must always
be balanced against the requirements of
economics and coordination with the
overall process needs.
At the conceptual phase of a project,
several distribution system alternatives
should be considered, and examined both
technically and economically. This study
should include sufficient detail for a
thorough understanding of the system
alternatives. The conceptual study should
determine the optimal distribution system
configuration for the project, on which
definitive design can proceed.
At all stages of design, the principal
objectives of personnel safety, equipment
protection, process continuity, fault
clearing, and service continuity should be
considered.
In designing a new or modified
distribution system, the following types of
system studies may be needed:
1. Short Circuit Studies: three phase,
line-to-line, and line-to-ground faults
can be calculated for both close-andlatch and interrupting conditions,
necessary for checking interrupting
device and related equipment ratings,
and setting protective devices.
2. Circuit Breaker Application Studies:
consider the AC and DC decrements
in the fault current, and the speed of
the various medium voltage circuit
breakers, to determine close-and-latch
and interrupting duties.
3. Protective Device Coordination
Studies: determine characteristics
and settings of protective devices,
e.g., relays, trip devices, fuses, etc.
The coordination study should provide
a balance between protection of
system equipment and continuity
of service.
Selection
4. Load Flow Studies: calculate voltages, phase angles, real and reactive
power, line and transformer loadings
under simulated conditions to aid in
determining the performance of a
new or revamped system during the
planning stage.
5. Motor Starting Studies: determine
severity of voltage dips and adequacy
of load accelerating torque when starting large motors on a weak system.
Today, most studies are performed using
computers. Some specialized studies
require large computing resources, but
many studies can now be performed on
personal computers. A wide variety of
software packages are available. In
addition, many specialty firms exist which
provide engineering service to perform
such studies.
Short Circuit Calculations
The single-line diagram serves as the
starting point for the system study and
selection of equipment ratings. The
single-line must be modified to show all
power sources and capacities, and
system impedances. Sources of short
circuit current include utility connections,
local generation, and all rotating machines
connected to the system at the instant
the fault occurs. The system study should
consider various fault types (line-to-line
and line-to-ground) and fault locations.
The value of normal load current in a
circuit depends on the load connected,
and is essentially independent of the
capacity of the power system. On the
other hand, the short circuit current
depends almost entirely on the capacity
of the power system, not the size of the
load.
The total fault current consists of a
symmetrical AC component,
superimposed on a DC (offset)
component. Hence, the total fault current
is asymmetric with respect to the current
axis. The value of the DC component
depends on the point of the voltage wave
at which the fault was initiated. For
system studies, it is assumed that the
fault is initiated at the worst point, to
produce a “fully offset” fault current. This
is illustrated in Figure 25.
Short circuit currents are determined by
the system impedance, including both
reactance and resistance. The effect of
the reactance is to cause the initial fault
current to be high, with the fault current
declining as time proceeds. This is
represented as the summation of a DC
component which decays relatively
rapidly over time, and an AC component,
which decays at a slower rate. The rate of
decay of the components depends on the
system X / R ratio.
Since the reactance of rotating machines
varies with the time from fault initiation,
the short circuit calculations must use the
appropriate machine reactance values.
Subtransient reactance (X”d) governs
current flow for approximately the first 6
cycles of a fault. Then, transient
reactance (X’d) determines current flow
up to around 30-120 cycles, depending on
the machine. After this, synchronous
reactance (Xd) applies, but studies
seldom use this value as faults are not
usually allowed to persist for this length
of time.
For transformers, the actual tested value
of the transformer impedance is used. If
this is not available, use design
impedance adjusted to the minimum
value allowed by manufacturing tolerance
of +
– 7.5%. For example, a 5.75% design
unit has a tolerance range of 5.32-6.18%,
and 5.32% would be used in a system
study prior to manufacture.
Figure 25. Structure of Asymmetrical Current Wave (Fully Offset)
18-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Technical
Current Limiting Circuit Breaker Technology
Fuseless Current Limiting
Circuit Breakers
The technology of Siemens Sentron®
fuseless current limiting circuit breakers
was developed to meet the demands of
modern distribution systems. It is
not uncommon for today’s systems to
have prospective short circuit currents
approaching 200,000 amperes. Users
demanded the protection and flexibility
afforded by circuit breakers, without
the nuisance and expense of fuse
replacement.
Underwriters Laboratories, in UL4892.4A, defines a fuseless current limiting
circuit breaker as one that “does not
employ a fusible element, and that when
operating within its current-limiting range,
limits the let-through l2t to a value less
than the l2t of a half-cycle wave of the
symmetrical prospective current.”
l2t is an expression which allows
comparison of the energy available as a
result of fault current flow. As used in
current limiting discussions, l 2t refers to
the energy released between the initiation
of the fault current and the clearing of the
circuit.
Figure 26 relates the “prospective l2t” to
the energy allowed by a Sentron current
limiting circuit breaker, or “let-through
l2t”. The upper curve represents the
maximum I2 the circuit can produce,
unaltered by the presence of any
protective device. The lower curve
illustrates the reduction in energy
allowed when Sentron current limiting
circuit breakers are used.
Selection
The Sentron circuit breakers use the
“blow-apart” contact principle to
accomplish current limitation. This
principle is based on the electro-magnetic
repulsion of adjacent conductors which
carry current in opposite directions.
The contact arms are arranged to create
opposing magnetic fields. As fault current
rises, magnetic repulsion forces the
contacts to separate completely. The
higher the fault current, the faster this
“blow-apart” action occurs.
As figure 27 illustrates, the energy letthrough with the current limiting Sentron
circuit breaker is decreased significantly.
This provides better protection for
downstream equipment, and reduces
damage.
Figure 26. Reduction of l2t Let-Through
with Current-Limiting Technology
Applications and Ratings
Sentron current limiting circuit breakers
are designed for use in load centers,
power panelboards, distribution
switchboards, secondary unit
substations, and all types of individual
enclosures where the available fault
currents exceed the interrupting ratings
of heavy duty and extra-heavy duty
molded case circuit breakers.
Sentron circuit breakers have ratings of
15 through 1600 amperes, 240 through
600 volts AC, with up to 200,000
symmetrical amperes interrupting rating.
Figure 27. Current Limitation
TECHNICAL
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18
Figure 27 illustrates how the Sentron
circuit breaker limits the energy under
fault conditions. The upper curve
illustrates the first half-cycle wave of
prospective fault current. To qualify as
truly current limiting, the circuit breaker
must prevent the current value from
reaching the maximum value that it
would reach if the circuit breaker were
not connected in the circuit.
18-15
Technical
Series-Connected Combination Ratings
TECHNICAL
18
Series-Connected Rating
A series-connected rating can be assigned
to a combination of components —
typically circuit breakers — which has
been tested in combination to a higher
interrupting rating than that of the lowest
rated protective device of the
combination. These ratings must be
substantiated by extensive UL testing.
General
Article 110.9 of the 2005 National Electric
Code states the following: “Equipment
intended to interrupt current at fault levels
shall have an interrupting rating sufficient
for the nominal circuit voltage and the
current that is available at the line
terminals of the equipment. Equipment
intended to interrupt current at other than
fault levels shall have an interrupting rating
at nominal circuit voltage sufficient for the
current that must be interrupted.”
The difference between the phrases “at
fault levels” and “at other than fault
levels” is the part of the Code which
makes series-connected systems
possible. For example, the traditional
method of satisfying the Code was to
select each breaker in the series with an
interrupting rating equal to or greater than
the prospective fault current. The
interrupting rating of a circuit breaker —
stated in RMS symmetrical amperes — is
the amount of short circuit current the
device can safely interrupt and continue to
function as a circuit breaker.
Thus, if the prospective fault current at the
line terminals of a panelboard is 100,000A
RMS symmetrical, this traditional method
would require that all the circuit breakers
within the panelboard be rated at
100,000A RMS symmetrical or greater
interrupting capacity. This is illustrated in
Figure 28. In the traditional system, both
the main and the feeder breaker are
subjected to several short circuit peaks.
Figure 28 — Without Current Limiting
18-16
Selection
In a series-connected system, however,
the individual components (or circuit
breakers) have already been tested in
series and the combination has been
given an interrupting rating equal to or
greater than various prospective fault
currents which are available. The
combination, therefore, acts as a single
entity, and performs the same protective
function as individual circuit breakers in
the traditional method. The difference is
that combinations in series-connected
systems contain devices with lower
interrupting ratings.
Siemens circuit breakers used in series
combinations which have passed
extensive tests required by Underwriters
Laboratories are listed in the UL
Recognized Component Directory
according to manufacturer’s name and
type. The listing means that such circuit
breakers are UL Recognized for the series
interrupting ratings as noted in the
Directory, and that they can be used as an
entity to meet Article 110.9 of the NEC.
Using the previous example, if the
prospective fault current at the line
terminals of the panelboard is 100,000
amperes RMS symmetrical, the seriesconnected method would involve
selecting a specific combination from the
UL Recognized Component Directory with
a rating of 100,000 amperes RMS
symmetrical or greater interrupting
capacity. That combination might include
individual components which have lower
individual interrupting ratings than 100,000
amperes RMS symmetrical.
However, all the components in the
combination have been tested together
and form an entity that will safety interrupt
the prospective fault current of the
particular situation being examined as long
as the interrupting rating listed matches
the prospective fault current.
With the advent of fuseless current
limiting circuit breakers such as Sentron,
another important development in seriesconnected combinations has emerged.
Because of the fuseless current limiting
circuit breaker’s extremely fast interrupting
capability, this device provides more
control over high prospective fault
currents than traditional series-connected
systems.
The concept behind using fuseless current
limiting circuit breakers as a component in
a series-connected system is twofold: (1)
higher interrupting ratings, and (2)
increased control over peak current (ip) and
energy let-through (I2t).
For example, a current limiting circuit
breaker is placed at the side closest to the
source of power and rated according to
the prospective fault current available at
the line-side terminals. In effect, doing this
places a “shroud of protection” over the
downstream components. Because of the
inherent high interrupting capability of the
current limiting circuit breaker, the breaker
itself meets or exceeds the prospective
short circuit current. Because of its current
limiting action the prospective I2t never
reaches downstream components. This is
illustrated in Figure 29.
It is important to recognize that the
current limiting circuit breaker be an
individual component in a UL tested
combination, and that it is the combination
itself — current limiting circuit breaker
plus other circuit breakers — that forms
entity specified in day-to-day applications.
For specific series-connected
combinations that have met UL
requirements and are listed in the UL
Recognized Component Directory, check
with your local Siemens sales office listed
on the back cover. Since the Directory is
updated every six months, please check
for additional combinations which may
have been tested and approved.
Figure 29 — Series-Connected Protective Scheme With Current
Limiting Main Circuit Breaker
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Technical
Harmonics / K-factor Ratings
Non-Linear Loads
When a sinusoidal voltage is applied to a
linear load, the resultant current
waveform takes on the shape of a sine
wave as well. Typical linear loads are
resistive heating and induction motors.
In contrast, a non-linear load either:
▪ Draws current during only part of the
cycle and acts as an open circuit for
the balance of the cycle,
or
Changes
the impedance during the
▪
cycle, hence the resultant waveform is
distorted and no longer conforms to a
pure sine wave shape
In recent years, the use of electronic
equipment has mushroomed in both
offices and industrial plants. These
electronic devices are powered by
switching power supplies or some type
of rectifier circuit. Examples of these
devices used in offices are: computers,
fax machines, copiers, printers, cash
registers, UPS systems, and solid-state
ballasts. In industrial plants, one will find
other electronic devices such as variable
speed drives, HID lighting, solid-state
starters and solid-state instruments. They
all contribute to the distortion of the
current waveform and the generation of
harmonics. As the use of electronic
equipment increases and it makes up a
larger portion of the electrical load, many
concerns are raised about its impact on
the electrical power supply system.
Voltage of Current Waveform for Linear Loads (Sine Wave)
Typical Current Waveform of Switching Power Supply
A Non-Linear Current and Its Fundamental, Plus 3rd and 5th Harmonic Components
18
TECHNICAL
Harmonics
As defined by ANSI / IEEE Std. 519-1992,
harmonic components are represented
by a periodic wave or quantity having a
frequency that is an integral multiple of
the fundamental frequency. Harmonics
are voltages or currents at frequencies
that are integer multiples of the
fundamental (60 Hz) frequency: 120 Hz,
180 Hz, 240 Hz, 300 Hz, etc. Harmonics
are designated by their harmonic number,
or multiple of the fundamental frequency.
Thus, a harmonic with a frequency of 180
Hz (three times the 60 Hz fundamental
frequency) is called the 3rd harmonic.
Harmonics superimpose themselves on
the fundamental waveform, distorting it
and changing its magnitude. For instance,
when a sine wave voltage source is
applied to a non-linear load connected
from a phase-leg to neutral on a 3-phase,
4-wire branch circuit, the load itself will
draw a current wave made up of the
60 Hz fundamental frequency of the
voltage source, plus 3rd and higher order
odd harmonic (multiples of the 60 Hz
fundamental frequency), which are all
Selection
Figure 30 — Effect of Harmonics on Current Waveform
generated by the non-linear load. Total
Harmonic Distortion (THD) is calculated
as the square root of the sum of the
squares of all harmonics divided by the
normal 60 Hz value.
THD=
冑
( (( ( ( (
( (
IRMS
60 HZ
2
IRMS
2
180 HZ
IRMS
60 HZ
IRMS
N
2
2
Therefore, it is the percentage amount of
odd harmonics (3rd, 5th, 7th ,..., 25th,...)
present in the load which can affect the
transformer, and this condition is called a
“Non-Linear Load” or “Non-Sinusoidal
Load”. To determine what amount of
harmonic content is present, a K-Factor
calculation is made instead of using the
THD formula. The total amount of
harmonics will determine the percentage
of non-linear load, which can be specified
with the appropriate K-Factor rating.
This yields an RMS value of distortion as
a percentage of the fundamental 60 Hz
waveform.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-17
Technical
Harmonics / K-factor Ratings
Typical Symptoms of Harmonic
Problems
▪ Distribution / lighting transformers
overheating even when measured load
current is within transformer rating
▪ Neutral cable / bus overheating even
with balanced load
▪ Fuses blowing and circuit breakers
tripping at currents within rating
Effect Of Harmonics On Transformers
Non-sinusoidal current generates extra
losses and heating of transformer coils
thus reducing efficiency and shortening
the life expectancy of the transformer.
Coil losses increase with the higher
harmonic frequencies due to higher eddy
current loss in the conductors.
Furthermore, on a balanced linear power
system, the phase currents are 120
degrees out of phase and offset one
another in the neutral conductor. But with
the “Triplen” harmonics (multiple of 3)
the phase currents are in phase and they
are additive in this neutral conductor. This
may cause installations with non-linear
loads to double either the size or number
of neutral conductors.
TECHNICAL
18
Table 17.5
K-Factor Ratings
100%
NonLinear
Load
50%
Total KFactor
Load Valve
4.0
100%
100%
13.0
K20
100%
125%
20.0
K30
100%
150%
30.0
Type
Linear
Load
K4
K13
Selection
Sizing Transformers for Non-Linear
Loads
ANSI / IEEE C57.110-1986 has a
procedure for de-rating standard
distribution transformers for non-linear
loading. However this is not the only
approach. A transformer with the
appropriate K-Factor specifically designed
for non-linear loads can be specified.
K-Factors
K-Factor is a ratio between the additional
losses due to harmonics and the eddy
losses at 60 Hz. It is used to specify
transformers for non-linear loads. Note
that K-Factor transformers do not
eliminate harmonic distortion; they
withstand the non-linear load condition
without overheating.
Calculating K-Factor Loads
1. List the kVA value for each load
category to be supplied. Next, assign a
K-factor designation that corresponds
to the relative level of harmonics
drawn by each type of load. Refer to
Table 21.5.
2. Multiply the kVA of each load or load
category times the Index of Load
K-rating (ILK) that corresponds to the
assigned K-factor rating. This result is
an indexed kVA-ILK value.
KVA x ILK = kVA-ILK.
Table 17.7
Index of Load K-Ratings
K-Factor
K1
ILK
K4
25.82
K9
44.72
K13
57.74
80.94
K30
123.54
K40
208.17
3. Tabulate the total connected load kVA
for all load categories to be supplied.
4. Next, add-up the kVA-ILK values for all
loads or load categories to be supplied
by the transformer.
5. Divide the grand total kVA-ILK value by
the total kVA load to be supplied. This
will give an average ILK for that combination of loads. Total kVA-ILK/ Total
kVA = average ILK.
6. From Table 21.6 find the K-factor rating
whose ILK is equal to or greater than
the calculated ILK.
Estimating K-Factor Loads햲
K-Factor
ILK
Incandescent Lighting
Electric Resistance Heating
Motors (without solid state drives)
Control Transformers / Electromagnetic Control Devices
Motor-Generators (without solid state drives)
Standard Distribution Transformers
K1
0.00
Electric Discharge Lighting (HID)
UPS with Optional Input Filter
Welders
Induction Heating Equipment
PLCs and Solid State Controls
K4
25.82
K13
57.74
Main-Frame Computer Loads
Solid State Motor Drives (variable speed drives)
Multiwire Receptacle Circuits in Critical Care Areas in Hospitals
K20
80.94
Multiwire Receptacle Circuits in Industrial, Medical and Educational Laboratories
Multiwire Receptacle Circuits in Commercial Office Spaces
Small Main-Frames (mini and micro)
K30
123.54
Telecommunications Equipment (PBX)
UPS without Input Filtering
Multiwire Receptacle Circuits in General Care Areas of Health Care Facilities,
Schools, etc.
Multiwire Receptacle Circuits Supplying Testing Equipment on an Assembly Line
/
0.0
K20
Description
Measurement of Harmonics
For existing installations, the extent of
the harmonics can be measured with
appropriate instruments commonly
referred to as “Power Harmonic
Analyzers”. This service is offered by
many consulting service organizations.
For new construction, such information
may not be obtainable. For such
situations, it is best to assume the worse
case condition based on experience with
the type and mix of loads.
18-18
Table 17.6
Typical loads and K-Factor values for estimating purposes only.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Technical
General
Table 1
Ampacities of Insulated Conductors (From NEC Table 310-16)
Not More Than Three Conductors in Raceway or Cable or Earth (Directly Buried).
(Based on Ambient Temperature of 30°C, 86°F)
Size
Copper Conductors
60°C
75°C
(140°F)
(167°F)
Types
Types
AWG
Kcmil
0018
0016
0014 햲
0012 햲
0010 햲
0008
0006
0004
0003
0002
0001
00001⁄0
00002⁄0
00003⁄0
00004⁄0
250
300
350
400
500
600
700
750
800
900
1000
1250
1500
1750
2000
TW
UF
—
—
020
025
030
040
055
070
085
095
110
125
145
165
195
215
240
260
280
320
355
385
400
410
435
455
495
520
545
560
RHW
THW
THWN
XHHW
USE
ZW
—
—
020
025
035
050
065
085
100
115
130
150
175
200
230
255
285
310
335
380
420
460
475
490
520
545
590
625
650
665
90°C
(194°F)
Types
TBS
SA
SIS
FEP
FEPB
RHH
THHN
THHW
XHHW
014
018
025
030
040
055
075
095
110
130
150
170
195
225
260
290
320
350
380
430
475
520
535
555
585
615
665
705
735
750
Aluminum Conductors
Copper-Clad Aluminum Conductors
60°C
75°C
90°C
(140°F)
(167°F)
(194°F)
Types
Types
Types
TBS,
SA, SIS,
THHN
RHW
THHW
THHW
THW-2, THWN-2,
THW
RHH, RHW-2
THWN
USE-2
TW
XHHW
XHH, XHHW
UF
USE
XHHW-2, ZW-2
—
—
—
—
—
—
—
—
—
햲
햲
020
020
025 햲
025
030 햲
035 햲
030
040
045
040
050
060
055
065
075
065
075
085
075
090
100
085
100
115
100
120
135
115
135
150
130
155
175
150
180
205
170
205
230
190
230
255
210
250
280
225
270
305
260
310
350
285
340
385
310
375
420
320
385
435
330
395
450
355
425
480
375
445
500
405
485
545
435
520
585
455
545
615
470
560
630
Size
AWG
Kcmil
—
—
—
12
10
8
6
4
3
2
1
00001⁄0
00002⁄0
00003⁄0
00004⁄0
250
300
350
400
500
600
700
750
800
900
1000
1250
1500
1750
2000
18
Table 2
Ambient
Temperature°C
21–25
26–30
31–35
36–40
41–45
46–50
51–55
56–60
61–70
71–80
For ambient temperature over 30°C, (86°F) multiply the ampacities shown above by the appropriate factor
shown below.
1.08
1.05
1.04
1.08
1.05
1.04
1.00
1.00
1.00
1.00
1.00
1.00
.91
.94
.96
.91
.94
.96
.82
.88
.91
.82
.88
.91
.71
.82
.87
.71
.82
.87
.58
.75
.82
.58
.75
.82
.41
.67
.76
.41
.67
.76
0.58
.71
—
0.58
.71
—
0.33
.58
—
0.33
.58
—
—
—
.41
—
—
.41
Ambient
Temperature°F
70–77
78–86
87–95
96–104
105–113
114–122
123–131
132–140
141–158
159–176
햲 The
load current rating and the overcurrent protection
for conductor types shall not exceed 15 amperes for 14
AWG, 20 amperes for 12 AWG, and 30 amperes for 10
AWG copper; or 15 amperes for 12 AWG and 25 amperes
for 10 AWG aluminum and copper-clad aluminum after
any correction factors for ambient temperature and
number of conductors have been applied.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-19
TECHNICAL
Correction Factors for Ambient Temperature Over 30°C, 86°F
Technical
General
Table 4A
Table 4B
Table 4C
Motor Full-Load Currents of Three
Phase AC Induction Type Motors 햲
Motor Full-Load Currents
In Amperes, Single Phase, AC
Motor Full-Load Currents
In Amperes, DC
Current in Amperes
208V
230V
460V
575V
0001⁄4
0001⁄3
0001⁄2
0003⁄4
001
0011⁄2
002
003
005
0071⁄2
010
015
020
025
030
040
050
060
075
100
125
150
200
250
300
350
400
450
500
1.11
1.34
2.4
3.5
4.6
6.6
7.5
10.6
16.7
24.2
30.8
46.2
59.4
74.8
88
114
143
169
211
273
343
396
528
—0
—0
—0
—0
—0
—0
.96
1.18
2.2
3.2
4.2
6
6.8
9.6
15.2
22.0
28.0
42.0
54
68
80
104
130
154
192
248
312
360
480
—0
—0
—0
—0
—0
—0
.48
.59
1.1
1.6
2.1
3
3.4
4.8
7.6
11.0
14.0
21.0
27
34
40
52
65
77
96
124
156
180
240
302
361
414
477
515
590
.38
.47
.9
1.3
1.7
2.4
2.7
3.9
6.1
9.0
11.0
17.0
22
27
32
41
52
62
77
99
125
144
192
242
289
336
382
412
472
TECHNICAL
18
Motor
Rating
Horsepower
Horsepower
001⁄6
001⁄4
001⁄3
001⁄2
003⁄4
01
011⁄2
02
03
05
071⁄2
10
115V
4.4
5.8
7.2
9.8
13.8
16
20
24
34
56
80
100
230V
2.2
2.9
3.6
4.9
6.9
8
10
12
17
28
40
50
Horsepower
001⁄4
001⁄3
001⁄2
003⁄4
01
011⁄2
02
03
05
071⁄2
10
120V
3.1
4.1
5.4
7.6
9.5
13.2
17
25
40
58
76
240V
1.6
2.0
2.7
3.8
4.7
6.6
8.5
12.2
20
29
38
Table 4D
Conversion Table of Polyphase Design B, C, D, and E Maximum Locked-Rotor
Currents for Selection of Disconnecting Means and Controllers as Determined
from Horsepower and Voltage Rating and Design Letter For use only with
Sections 430-110, 440-12, 440-41, and 455-8(c) of the National Electric Code.
Maximum Motor Locked-Rotor Current Amperes
Two and Three Phase Design B, C, D, and E
Rated 115 Volts
200 Volts
208 Volts
230 Volts
HP B, C, D
E
B, C, D
E
B, C, D
E
B, C, D
E
1
000 ⁄2
40
40
23
23
22.1
22.1
20
20
3
000 ⁄4
50
50
28.8
28.8
27.6
27.6
25
25
001
60
60
34.5
34.5
33
33
30
30
1
001 ⁄2
80
80
46
46
44
44
40
40
002
100
100
57.5
57.5
55
55
50
50
003
—0
—0
73.6
84
71
81
64
73
005
—0
—0
105.8 140
102
135
92
122
0071⁄2
—0
—0
146
210
140
202
127
183
010
—0
—0
186.3 259
179
249
162
225
015
—0
—0
267
388
257
373
232
337
020
—0
—0
334
516
321
497
290
449
025
—0
—0
420
646
404
621
365
562
030
—0
—0
500
775
481
745
435
674
040
—0
—0
667
948
641
911
580
824
050
—0
—0
834
1185
802
1139
725
1030
060
—0
—0 1001
1421
962
1367
870
1236
075
—0
—0 1248
1777
1200
1708
1085
1545
100
—0
—0 1668
2154
1603
2071
1450
1873
125
—0
—0 2087
2692
2007
2589
1815
2341
150
—0
—0 2496
3230
2400
3106
2170
2809
—0 3335
4307
3207
4141
2900
3745
200
—0
250
—0
—0
—00
—00
—00
—00
—00
—00
300
—0
—0
—00
—00
—00
—00
—00
—00
350
—0
—0
—00
—00
—00
—00
—00
—00
—0
—00
—00
—00
—00
—00
—00
400
—0
450
—0
—0
—00
—00
—00
—00
—00
—00
500
—0
—0
—00
—00
—00
—00
—00
—00
460 Volts
B, C, D
E
10
10
12.5
12.5
15
15
20
20
25
25
32
36.5
46
61
63.5
91.5
81
113
116
169
145
225
183
281
218
337
290
412
363
515
435
618
543
773
725
937
908
1171
1085
1405
1450
1873
1825
2344
2200
2809
2550
3277
2900
3745
3250
4214
3625
4682
575 Volts
B, C, D
E
8
8
10
10
12
12
16
16
20
20
25.6
29.2
36.8
48.8
50.8
73.2
64.8
90
93
135
116
180
146
225
174
270
232
330
290
412
348
494
434
618
580
749
726
936
868
1124
1160
1498
1460
1875
1760
2247
2040
2622
2320
2996
2600
3371
2900
3746
Table 5
Normal-Load and Fault Currents of Three Phase Transformers
Transformer
Characteristics
3-Phase
햲 Values
may vary depending on manufacturer,
type of motor and NEMA design.
For full load currents of 200 volt motors, increase the
corresponding 230 volt motor full-load current by
15 percent.
Table 5 Notes:
1. Primary source available is assumed as 500 MVA at the
primary of the transformer with a source circuit X/R
ratio of 12.
2. Motor contribution is included in the table at twice the
full-load current for 208 volt transformers and at 4
times the full-load current for 240 volt and 480 volt
transformers. These values are derived from the
assumption that 208 volt systems are 50% motor load
and 240 and 480 volt systems are 100% motor load.
3. All short circuit current values are in symmetrical
RMS amperes.
18-20
kVA
Rating
112.5
150
225
300
500
750
1000
1500
2000
2500
1000
1500
AC Voltage 3-Phase
280V
Normal Load Short
%
Continuous Circuit
Impedance Amperes
Current
2.25
312
14,491
3.00
416
14,699
4.50
625
15,139
5.00
834
18,326
5.00
1388
30,536
5.75
2080
40,373
5.75
2780
53,830
5.75
4162
80,745
—0 0 0
5.75
—00
5.75
—00
—0 0 0
8.00
—00
—0 0 0
8.00
—00
—0 0 0
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
240V
Normal Load
Continuous
Amperes
271
361
541
722
1203
1804
2406
3610
4812
6010
—00
—00
Short
Circuit
Current
13,128
13,477
14,186
17,328
28,872
38,590
51,467
77,201
102,914
128,647
—0000
—0000
480V
Normal Load
Continuous
Amperes
135
180
271
361
601
902
1203
1805
2406
3008
1203
1805
Short
Circuit
Current
6,540
6,720
7,106
8,664
14,424
19,295
25,734
38,590
51,467
64,324
19,850
29,766
Technical
General
Table 6
Electrical Formulas for Finding Amperes, Horsepower, Kilowatts and kVA
To Find
Kilowatts
kVA
Horsepower
(Output)
Amperes when
Horsepower
is Known
Amperes when
Kilowatts
is Known
Amperes when
kVA is Known
Single Phase
I x E x pf
1000
IxE
1000
I x E x % EFF x pf
746
Alternating Current
Two Phase 햲, Four Wire
I x E x 2 x pf
1000
IxEx2
1000
I x E x 2 x % EFF x pf
746
Three Phase
I x E x 1.73 x pf
1000
I x E x 1.73
1000
I x E x 1.73 x % EFF x pf
746
Direct Current
IxE
1000
I x E x % EFF
746
HP x 746
E x % EFF x pf
HP x 746
2 x E x % EFF x pf
HP x 746
1.73 x E x % EFF x pf
HP x 746
E x % EFF
KW x 1000
E x pf
KW x 1000
2 x E x pf
KW x 1000
1.73 x E x pf
KW x 1000
E
kVA x 1000
E
kVA x 1000
2xE
kVA x 1000
1.73 x E
Average Efficiency and Power Factor
Values of Motors
When the actual efficiencies and power
factors of the motors to be controlled are
not known, the following approximations
may be used.
Efficiencies:
DC motors, 35 horsepower
and less
80% to 85%
DC motors, above
35 horsepower
85% to 90%
Synchronous motors
(at 100% power factor)
92% to 95%
“Apparent” Efficiencies
( = Efficiency x Power Factor);
Three phase induction motors,
25 horsepower and less
70%
Three phase induction motors
above 25 horsepower
80%
These figures may be decreased
slightly for single phase and two phase
induction motors.
Fault-Current Calculation on LowVoltage AC Systems
In order to determine the maximum
interrupting rate of the circuit breakers in
a distribution system it is necessary to
calculate the current which could flow
under a three phase bolted short circuit
condition. For a three phase system the
maximum available fault current at the
secondary side of the transformer can be
obtained by use of the formula:
ISC =
kVA x 100
KV x √3 x % Z
Minimum Size Grounding Conductors
for Grounding Raceways and
Equipment (From NEC Table 250–122)
Size
Copper
Wire
Number
14
12
10
10
10
8
6
4
3
2
1
1/0
2/0
3/0
4/0
250 kcmil
350 kcmil
400 kcmil
500 kcmil
700 kcmil
800 kcmil
Aluminum or
Copper
Clad
Aluminum
Wire Number
12
10
8
8
8
6
4
2
1
1/0
2/0
3/0
4/0
250 kcmil
350 kcmil
400 kcmil
600 kcmil
600 kcmil
800 kcmil
1200 kcmil
1200 kcmil
Note: Where necessary to comply with 250.4(A)(5) or
(B)(4), the equipment grounding conductor shall be sized
larger than given in this table.
Table 7 햳
Grounding Electrode Conductor for AC Systems (From NEC Table 250–66)
Size of Largest Service Entrance Conductor or Equivalent Area
for Parallel Conductors
Copper
2 or smaller
1 or 1/0
2/0 or 3/0
Over 3/0 to 350 kcmil
Over 350 kcmil to 600 kcmil
Over 600 kcmil to 1100 kcmil
Over 1100 kcmil
Aluminum or Copper
Clad Aluminum
1/0 or smaller
2/0 or 3/0
4/0 or 250 kcmil
Over 250 kcmil to 500 kcmil
Over 500 kcmil to 900 kcmil
Over 900 kcmil to 1750 kcmil
Over 1750 kcmil
햲 In
three wire, two phase circuits the current in
the common conductor is 1.41 times that in either
other conductor.
E = Volts I = Amperes
% EFF = Per Cent Efficiency
Size of Grounding
Electrode Conductor
Aluminum or
Copper Clad
Copper
Aluminum
8
6
6
4
4
2
2
1/0
1/0
3/0
2/0
4/0
3/0
250 kcmil
햳 Additional
information and exceptions are stated in
Article 250 — Grounding, National Electric Code.
pf = Power Factor
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-21
TECHNICAL
Rating or Setting of
Automatic Overcurrent
Device in Circuit Ahead
of Equipment, Conduit
etc., Not Exceeding
(Amperes)
15
20
30
40
60
100
200
300
400
500
600
800
1000
1200
1600
2000
2500
3000
4000
5000
6000
18
where:
ISC = Symmetrical RMS amperes of
fault current.
kVA = Kilovolt-ampere rating of
transformers.
KV = Secondary voltage in kilovolts.
% Z = Percent impedance of primary line
and transformer.
Table 5 on page 18-20 has been prepared
to list the symmetrical RMS fault current
which is available at the secondary
terminals of the transformer.
Table 8 햳
Molded Case Circuit Breakers
Unusual Operating Conditions
Application
Note: The information provided on this and the next page is intended for reference and recommendation only. Because several
variables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing, than on
experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.
TECHNICAL
18
High Ambient Temperatures
Because standard thermal-magnetic
breakers are temperature sensitive and
calibrated for a specific ambient of 40°C
(104°F) (average enclosure temperature),
the presence of an ambient higher will
cause the breaker to carry less current
than its name-plate rating — in other
words, causing the breaker to “derate”
(see Table 17.33). Similarly, the safe
current carrying capacity of a circuit
conductor is based upon an ambient
temperature of 30°C (86°F) (average air
temperature) and the presence of a higher
ambient will reduce its safe current
carrying capacity, causing it to “derate.”
Thus, it can be seen from Table 17.33 that
in the presence of a fluctuating
temperature, a thermal-magnetic breaker
will derate nearly parallel with its
connected circuit conductors and maintain
close circuit protection. If the application
temperature exceeds 40°C (104°F) and is
known, either a breaker especially
calibrated for the higher ambients or one
oversized according to Table 17.33 may be
selected. It should be noted that in a case
such as this, the circuit conductors should
be oversized as well.
Siemens Sensitrip® III and Type SB
Encased System Breakers are insensitive
to temperature changes. However, they do
include circuitry to protect the components
from abnormally high temperatures.
Table 17.35
Reference
Ampere
Rating at
40°C (104°F)
15
20
25
30
35
40
50
60
70
90
100
125
150
175
200
225
250
300
350
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
Temperature Derating Data for Thermal-Magnetic Breakers
Relative Amperage Rating at:
25°C
(77°F)
17
22
28
33
39
44
55
66
77
99
110
137
165
192
220
247
275
330
385
440
550
660
770
880
990
1100
1320
1540
1760
1980
2200
50°C
(122°F)
13
18
23
28
30
37
46
56
65
84
94
144
136
159
182
205
235
276
325
372
468
564
658
754
828
900
1090
1304
1500
1690
1880
60°C
(140°F)
11
16
21
26
25
34
42
52
60
78
87
100
120
140
160
180
220
252
301
340
435
525
613
704
749
825
1000
1148
1320
1485
1650
Moisture — Corrosion
For atmospheres having high moisture
content and I or where fungus growth is
prevalent, a special preventive treatment
may be required. Where the air is heavily
laden with corrosive elements, breakers
made with special corrosion-resistant
finishes are recommended.
Altitude
Reduced air density at altitudes greater
than 6600 ft. (2000 meters) affects the
ability for a molded case circuit breaker to
transfer heat and interrupt faults.
Therefore, circuit breakers applied at these
altitudes should have interrupting insulation
and continuous currents derated as
indicated in Table 17.34.
Table 17.34
Altitude Correction
Rating
Correction Factor
Continuous
Altitude in feet (meters) Current
Voltage
6600 (and below) (2000)
1
1
8500 (2600)
0.95
0.99
13000 (4000)
0.8
0.96
햲 Values
for intermediate altitudes may be derived from
linear interpolation. See Figure 1.
18-22
Figure 1 — Altitude Adjustment Chart
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Siemens Beaker Types
ED2
ED4
ED6
HED4
HED6
CED6
FXD6
FD6
HFD6
CFD6
QJ2
QJH2
QJ2-H
JXD2
MXD6, MD6
HMXD6
HMD6
CMD6
JXD6
JD6
HJD6
HHJD6
CJD6
NXD6, ND6
HNXD6
HND6
CND6
LXD6
LD6
HLD6
HHLD6
CLD6
PXD6, PD6
HPXD6, HPD6
CPD6
RXD6, RD6
HRXD6, HRD6
Molded Case Circuit Breakers
Unusual Operating Conditions (400 Hz Systems햲)
Circuit Breaker Derating Required
Table 17.35 lists the maximum continuous
current carrying capacity for Siemens
breakers at 400 Hz. Due to the increased
resistance of the copper sections resulting
from the skin effect produced by eddy
currents at these frequencies, circuit
breakers In many cases require derating.
The thermal derating on these devices is
based upon 100%, three phase application
in open air in a maximum of 40°C (104°F)
with 48 in. (1219 mm) of the specified
cable (75°C) of bus at the line and load
side. Additional derating of not less than
20% will be required if the circuit breaker
is to be utilized in an enclosure. Further
derating may be required if the enclosure
contains other heat generating devices or
if the ambient temperatures exceed 40°C
(104°F).
Cable and Bus Sizing
The cable and bus sizes to be utilized at
400 Hz are not based on standard
Table 17.36
National Electric Codes tables for 60 Hz
application. Larger cross sections are
necessary at 400 Hz to avoid exceeding
component temperature limits. All bus
bars specified are based upon mounting
the bars in the vertical plane to allow
maximum air flow. All bus bars are
spaced at a minimum of 0.25 in. (6 mm)
apart. Mounting of bus bars in the
horizontal plane will necessitate
additional drafting. Edgewise orientation
of the bus may change the maximum
ratings indicated. If additional information
is required for other connections of cable
or bus, contact Siemens for information.
Application Recommendations
It is recommended that thermal
indicating devices be placed on the line
and load terminals or T-connectors of the
center pole. These are usually the
hottest terminals with a balanced load. A
maximum temperature of 75°C (35°C
over a maximum ambient of 40°C) would
Application
verify the maximum rating for the
particular application. Temperature
profiles taken on these breakers can be
correlated to ensure that the hottest
points within the breaker are within the
required temperature limits.
Factory Configurations
When required, molded case circuit
breakers may be factory calibrated for
400 Hz application. These breakers are
specially labeled for 400 Hz usage and
their nameplate current rating will
include the necessary derating factor.
The highest “Maximum Continuous
Amperes” rating at 400 Hz, found in
Table 17.35 approximately equals the
highest specially calibrated 400 Hz
nameplate ampere rating available for a
given frame size. Contact Siemens for
ordering information on other breakers
applied in 400 Hz systems.
400 Hz Breakers
Maximum Continuous Ampere Rating
At 40°C (104°F) 햳
60 Hz
400 Hz
Siemens
Breaker
Enclosed
Type
Open Air Open Air 햴 After Derating
250
210
168
LD2, LXD6,
HLD6, HLXD6,
300
240
192
HHLD6,
350
260
208
HHLXD6,
400
300
240
CLD6
450
340
272
500
375
300
600
420
336
250
210
210
LD6, LXD6,
HLD6, HLXD6
300
240
240
100% Rated
350
260
260
400
300
300
450
340
340
500
375
375
600
420
420
500
400
320
MD6, MXD6,
HMD6, HMXD6,
600
430
360
CMD6
700
500
400
800
560
448
500
400
400
MD6, MXD6,
HMD6, HMXD6,
600
430
430
CMD6
700
500
500
100% Rated
800
560
560
800
560
448
ND6, NXD6,
HND6, HNXD6,
900
600
480
CND6
1000
650
520
1200
780
624
900
600
600
ND6, NXD6,
HND6, HNXD6,
1000
650
650
CND6
1200
780
780
780
624
PD6,PXD6,HPD6 1200
HPXD6, CPD6
1400
850
680
100% Rated
1600
960
768
1200
780
780
PD6, PXD6,
HPD6, HPXD6
1400
850
850
CPD6
1600
960
960
1600
960
768
RD6, RXD6,
1800
1080
864
HRD6, HRXD6
80% Rated
2000
1200
960
75°C (167°F)
Copper
Cable per Pole
No. of
Wire
Pieces
Size
1 pc.
250 kcmil
1 pc.
350 kcmil
1 pc.
500 kcmil
2 pcs.
#3/0
2 pcs.
#4/0
2 pcs.
250 kcmil
350 kcmil
2 pcs.
1 pc.
250 kcmil
350 kcmil
1 pc.
500 kcmil
1 pc.
2 pcs.
#3/0
2 pcs.
#4/0
2 pcs.
250 kcmil
2 pcs.
350 kcmil
2 pcs.
250 kcmil
2 pcs.
350 kcmil
3 pcs.
250 kcmil
3 pcs.
300 kcmil
2 pcs.
250 kcmil
2 pcs.
350 kcmil
3 pcs.
250 kcmil
3 pcs.
300 kcmil
3 pcs.
300 kcmil
3 pcs.
350 kcmil
3 pcs.
400 kcmil
4 pcs.
350 kcmil
3 pcs.
350 kcmil
3 pcs.
400 kcmil
4 pcs.
350 kcmil
4 pcs.
400 kcmil
4 pcs.
500 kcmil
5 pcs.
500 kcmil
4 pcs.
400 kcmil
4 pcs.
500 kcmil
5 pcs.
500 kcmil
5 pcs.
500 kcmil
5 pcs.
500 kcmil
6 pcs.
500 kcmil
햲 The
information provided on this page is intended for reference and recommendation only. Because several variables can act on a circuit breaker’s performance atthe same time,
the data above is based less on controlled testing than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.
햳 Additional derating may be required if the ambient temperature is greater than 40°C (104°F).
햴 Calculated after derating to compensate for the heating of the copper conductor, caused by the
skin effect generated by eddy currents produced at 400/415 Hz.
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-23
TECHNICAL
75°C (167°F)
Copper
Cable per Pole
No. of
Wire
Pieces
Size
1 pc.
#14
1 pc.
#12
1 pc.
#10
1 pc.
#10
1 pc.
#10
1 pc.
#8
1 pc.
#8
1 pc.
#8
1 pc.
#6
1 pc.
#4
1 pc.
#4
1 pc.
#3
1 pc.
#3
1 pc.
#2
1 pc.
#1
1 pc.
#4
1 pc.
#4
1 pc.
#3
1 pc.
#3
1 pc.
#2
1 pc.
#1
1 pc.
#1/0
1 pc.
#2/0
1 pc.
#3/0
1 pc.
#4/0
1 pc.
250 kcmil
1 pc.
#3/0
1 pc.
#4/0
1 pc.
250 kcmil
1 pc.
350 kcmil
1 pc.
500 kcmil
2 pcs.
#3/0
2 pcs.
#3/0
2 pcs.
#4/0
1 pc.
250 kcmil
1 pc.
350 kcmil
1 pc.
500 kcmil
2 pcs.
#3/0
18
Maximum Continuous Ampere Rating
At 40°C (104°F) 햳
60 Hz
400 Hz
Siemens
Breaker
Enclosed
Type
Open Air Open Air 햴 After Derating
15
15
12
ED2, ED4,
ED6, HED4,
20
20
16
HED6, CED6
25
25
20
30
30
24
35
35
28
40
40
32
45
43
34
50
48
38
60
57
46
60
67
54
80
76
61
90
86
69
100
95
76
110
105
84
125
119
95
70
63
50
FD6, FXD4,
HFD6, HFXD4,
80
72
58
CFD6
90
80
64
100
90
72
110
95
75
125
105
84
150
125
100
175
140
112
200
160
128
225
180
144
250
200
160
200
170
136
JXD2, JD6,
JXD6, HJD6,
225
190
152
HJXD6, HHJD6,
250
210
168
HHJXD6, CJD6
300
240
192
350
260
208
400
300
240
200
170
170
JD6, JXD6,
HJD6, HJXD6,
225
190
190
100% Rated
250
210
210
300
240
240
350
260
260
400
300
300
Molded Case Circuit Breakers
Capacitor Circuit Conductors
TECHNICAL
18
Article 460-8 (N.E.C.)
The ampacity of capacitor circuit
conductors shall not be less than 135%
of the rated current of the capacitor. The
ampacity of conductors that connect a
capacitor to the terminals of a motor or
to motor circuit conductors shall not be
less than one-third the ampacity of the
motor circuit conductors and in no case
less than 135% of the rated current of
the capacitor.
Application
Circuit breakers and switches for use
with capacitors must have a current
rating in excess of rated capacitor current
to provide for overcurrent from
overvoltages at fundamental frequency
and harmonic currents. Use the following
percent of capacitor current rating to size
circuit breaker or fused and non-fused
switches.
150%
▪ Enclosed Circuit Breakers
(Includes derating factor for enclosure)
165%
▪ Fused and non-fused
switches
Due to switching surges, and possible
overcurrent related to overvoltage and
harmonics, Siemens recommends using
150% of the capacitor current rating to
size a thermal-magnetic circuit breaker
for overload protection.
If the circuit breaker is to be applied in an
ambient greater than the marked rated
ambient, it may be necessary to derate
the continuous current rating. This is also
true for applications where harmonic
components are present. A basic formula
to use for calculation of the capacitor
current rating is as follows (assuming
three phase application):
Capacitor (Kvar) x 1000
(Voltage / 1.732) x 3
The interrupting rating of the circuit
breaker or fuse must be selected to
match the system fault current available
at the point of the capacitor application.
18-24
Application
Table 17.37
Capacitor Application
Capacitor
Rating
Voltage
240
480
Amperage
K var
2.5
5
7.5
10
15
20
25
30
45
50
60
75
90
100
120
125
135
150
180
200
225
240
250
270
300
360
375
2
5
7.5
10
15
20
25
30
35
40
45
50
60
75
80
90
100
Capacitor
Rating
6
12
18
24.1
36.1
48.1
60
72.2
108
120
144
180
217
240
289
301
325
361
433
480
541
578
602
650
720
866
903
2.41
6
9
12
18
24
30
36.1
42.1
48.1
54.1
60.1
72.2
90.2
96.2
108.3
120.3
Enclosed
Switch
Fuse
Rating
15
20
30
40
60
80
100
125
200
200
250
300
400
400
500
500
600
600
800
800
900
1000
1000
1200
1200
1600
1600
15
15
15
20
30
40
50
60
70
80
90
100
125
150
175
200
200
120
144
250
MCCB
Trip
Rating
15
20
30
40
60
80
90
125
175
200
225
275
350
400
450
450
500
500
700
800
900
900
900
1000
1200
1400
1400
15
15
15
20
30
40
50
50
60
70
80
100
110
150
150
175
200
225
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Capacitor
Rating
Amperage
Voltage
K var
Capacitor
Rating
Enclosed
Switch
Fuse
Rating
MCCB
Trip
Rating
125
150
250
225
150
180
300
300
160
192
350
300
180
216
400
350
200
241
400
400
225
271
500
500
240
250
289
301
500
500
500
500
300
320
360
375
400
361
385
433
451
481
600
700
800
800
800
600
600
700
700
800
450
5
7.5
10
15
20
25
30
35
40
45
50
60
75
80
100
120
125
150
160
180
200
225
240
250
300
320
360
375
400
450
541
4.8
7.2
9.6
14.4
19.2
24.1
28.9
33.7
38.5
43.3
48.1
57.7
72.2
77
96.2
115
120
144
154
173
192
217
231
241
289
308
346
361
385
433
900
15
15
20
25
35
40
50
60
70
80
80
100
125
150
175
200
200
250
300
300
300
400
400
400
500
600
600
600
700
800
900
15
15
15
30
30
40
50
50
70
70
100
100
125
125
150
175
200
225
250
300
300
350
350
400
450
500
600
600
600
700
480
(cont’d)
600
Technical
Fraction, Decimal, and Millimeter Equivalents
Fractions to Decimals to Millimeters
Millimeters to
Millimeters
0.397
0.794
1.191
1.588
1.984
2.381
2.778
3.175
3.572
3.969
4.366
4.763
5.159
5.556
5.953
6.350
6.747
7.144
7.541
7.938
8.334
8.731
9.128
9.525
9.922
10.319
10.716
11.113
11.509
11.906
12.303
12.700
13.097
13.494
13.891
14.288
14.684
15.081
15.478
15.875
16.272
16.669
17.066
17.463
17.859
18.256
18.653
19.050
19.447
19.844
20.241
20.638
21.034
21.431
21.828
22.225
22.622
23.019
23.416
23.813
24.209
24.606
25.003
25.400
Millimeters
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
Inches
0.0039
0.0079
0.0118
0.0157
0.0197
0.0236
0.0276
0.0315
0.0354
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
0.0394
0.0787
0.1181
0.1575
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5118
0.5512
0.5906
0.6299
0.6693
0.7087
0.7480
0.7874
0.8268
0.8661
0.9055
0.9449
0.9843
1.0236
1.0630
1.1024
1.1417
1.1811
1.2205
1.2598
1.2992
1.3386
1.3780
1.4173
1.4567
1.4961
1.5354
1.5748
1.6142
1.6535
1.6929
1.7323
1.7717
Millimeters
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Inches
1.8110
1.8504
1.8898
1.9291
1.9685
2.0079
2.0472
2.0866
2.1260
2.1654
2.2047
2.2441
2.2835
2.3228
2.3622
2.4016
2.4409
2.4803
2.5197
2.5591
2.5984
2.6378
2.6772
2.7165
2.7559
2.7953
2.8346
2.8740
2.9134
2.9528
2.9921
3.0315
3.0709
3.1102
3.1496
3.1890
3.2283
3.2677
3.3071
3.3465
3.3858
3.4252
3.4646
3.5039
3.5433
3.5827
3.6220
3.6614
3.7008
3.7402
3.7795
3.8189
3.8583
3.8976
3.9370
TECHNICAL
Decimals
0.015625
0.03125
0.046875
0.0625
0.078125
0.09375
0.109375
0.1250
0.140625
0.15625
0.171875
0.1875
0.203125
0.21875
0.234375
0.2500
0.265625
0.28125
0.296875
0.3125
0.328125
0.34375
0.359375
0.3750
0.390625
0.40625
0.421875
0.4375
0.453125
0.46875
0.484375
0.500
0.515625
0.53125
0.546875
0.5625
0.578125
0.59375
0.609375
0.6250
0.640625
0.65625
0.671875
0.6875
0.703125
0.71875
0.734375
0.7500
0.765625
0.78125
0.796875
0.8125
0.828125
0.84375
0.859375
0.8750
0.890625
0.90625
0.921875
0.9375
0.953125
0.96875
0.984375
1.000
18
Fractions
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
Conversion Tables
Inches 햲
햲 0.001"
= 0.0254 mm
1 mm = 0.03937"
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
18-25
TECHNICAL
18
NOTES
18-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
A01ED62
A01ED62B
A01EDLV
A01FD62
A01FD64
A01FDLV
A01HCPL4
A01HCPR4
A01JLD64
A01JLD64
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
VBSS
VBSS
MCCB
MCCB
6-36
6-36
6-36
6-39
6-39
6-39
4-22
4-22
6-43
6-47
ASKL2
ASKL3
ASKL3
ASKL3
ASKL3
ASKP3
ASKP3
ASKP3
ASKP4
ASKP4
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-99
6-103
6-107
6-111
6-99
6-115
6-119
6-122
6-115
6-119
B215HH
B215HID
B215R
B220
B220AF
B220AFH
B220H
B220HH
B220HID
B220R
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-20
6-18
6-18
6-19
6-19
6-18
6-18
6-20
6-18
B38
B38
B38
B38
B38
B38
B380
B380H
B380HH
B390
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
MCCB
MCCB
MCCB
MCCB
10-10
10-10
10-10
10-10
10-10
10-10
6-18
6-18
6-18
6-18
BE240H
BE250
BE250H
BE260
BE260H
BE4
BEC3100
BEC4100
BF115
BF115H
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
RESG 2-81
BPLU 14-57
BPLU 14-57
MCCB 6-19
MCCB 6-19
A01JLD64
A01JLD64B
A01JLD64B
A01JLD64B
A01JLDLV
A01JLDLV
A01JLDLV
A01MN64
A01MN64
A01MN64
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-50
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-58
6-61
ASKP4
ASWPA
ASWPA
ASWPA
ASWPA
ASWPA
ASWPA
ASWPA
ASWPB
ASWPB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-122
6-103
6-107
6-111
6-115
6-119
6-122
6-99
6-103
6-107
B225
B225H
B225HH
B230
B230H
B230HH
B230HID
B230R
B230S
B235
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-20
6-18
6-20
6-18
B390H
B390HH
B44
B44
B44
B44
B44
B44
B56
B56
MCCB
MCCB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
6-18
6-18
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
BF120
BF120H
BF125
BF125H
BF130
BF130H
BF215
BF215H
BF220
BF220H
MCCB
MCCB
MCCB
A01MN64
A01MN64B
A01MN64B
A01MN64B
A01MN64B
A01MNDLV
A01MNDLV
A01MNDLV
A01MNDLV
A02ED62
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-63
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-36
ASWPB
ASWPB
ASWPB
ASWPB
ASWPB
B00ED62
B00ED64
B00FD64
B00MN64
B00MN64
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-111
6-115
6-119
6-122
6-99
6-36
6-36
6-39
6-54
6-58
B235H
B235HH
B240
B240H
B240HH
B240R
B245
B245H
B245HH
B250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
B56
B56
B56
B56
B62
B62
B62
B62
B62
B62
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
BF230
BF230H
BF240
BF240H
BF250
BF250H
BF260
BF260H
BFC3250
BFC4250
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
MCCB 6-19
BPLU 14-57
BPLU 14-57
A02ED62B
A02FD62
A02FD64
A02JLD64
A02JLD64
A02JLD64
A02JLD64B
A02JLD64B
A02JLD64B
A02JLDLV
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-36
6-39
6-39
6-43
6-47
6-50
6-43
6-47
6-50
6-43
B00MN64
B00MN64
B01JLD64
B01JLD64
B01JLD64
B110
B115
B115AF
B115AFH
B115H
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-43
6-47
6-50
6-18
6-18
6-19
6-19
6-18
B250H
B250HH
B250R
B260
B260H
B260HH
B260R
B260S
B270
B270H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-20
6-18
6-18
B68
B68
B68
B68
B68
B68
BBKB32
BBKB32
BBKEB32
BBKED32
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
PBSB
PBSB
PBSB
PBSB
10-10
10-10
10-10
10-10
10-10
10-10
10-31
10-42
10-42
10-31
BG215
BG220
BG230
BG315
BG320
BG330
BHP
BJC3400
BJC4400
BK1
MCCB 6-20
MCCB 6-20
MCCB 6-20
MCCB 6-20
MCCB 6-20
MCCB 6-20
PILO 16-187
BPLU 14-57
14-57
UNPB 10-11
A02JLDLV
A02JLDLV
A02MN64
A02MN64
A02MN64
A02MN64
A02MN64B
A02MN64B
A02MN64B
A02MN64B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
B115HH
B115HID
B115T
B120
B120AF
B120AFH
B120H
B120HH
B120HID
B120T
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-20
6-20
6-18
6-19
6-19
6-18
6-18
6-20
6-20
B270HH
B270R
B280
B280H
B280HH
B280R
B290
B290H
B290HH
B290R
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
BBKED32
BBKNB32
BBKNB32
BBKQ1
BBKQ2
BCT1036HND6
BCT1036NXD6
BCT1236HND6
BCT1236NXD6
BCT331
PBSB
PBSB
PBSB
PBSB
PBSB
SWBD
SWBD
SWBD
SWBD
BUSW
10-42
10-31
10-42
10-31
10-42
12-24
12-24
12-24
12-24
14-61
BK2
BK3
BLC3600
BLC4600
BMC3800
BMC4800
BNK2
BOS14321
BOS14322
BOS14323
UNPB 10-11
10-11
BPLU 14-57
14-57
BPLU 14-57
14-57
PBSB 10-31
BPLU 14-57
BPLU 14-57
BPLU 14-57
A02MNDLV
A02MNDLV
A02MNDLV
A02MNDLV
ACT331
AMBL1
AMBL1
AMBL1
AMBL1
AMBL2
MCCB
MCCB
MCCB
MCCB
BUSW
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
14-61
6-103
6-107
6-111
6-99
6-103
B125
B125H
B125HH
B130
B130H
B130HH
B130HID
B135
B135H
B135HH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-20
6-18
6-18
6-18
B310
B3100
B3100H
B3100HH
B315
B315H
B315HH
B32
B32
B32
6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
UNPB 10-10
UNPB 10-10
UNPB 10-10
BCT436HJD6
BCT436JXD6
BCT636HLD6
BCT636LXD6
BCT836HMD6
BCT836MXD6
BDH10
BDH10
BDH10
BDH10
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
BUSW
BUSW
BUSW
BUSW
12-24
12-24
12-24
12-24
12-24
12-24
14-51
14-51
14-51
14-51
BOS14324
BOS14325
BOS14326
BOS14351
BOS14352
BOS14353
BOS14354
BOS14355
BOS14356
BOS16421
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
AMBL2
AMBL2
AMBL2
AMBL3
AMBL3
AMBL3
AMBL3
AMBP1
AMBP1
AMBP1
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-115
6-119
6-122
B140
B140H
B140HH
B145
B145H
B145HH
B150
B150H
B150HH
B160
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
B32
B32
B32
B320
B320H
B320HH
B325
B325H
B325HH
B330
UNPB 10-10
UNPB 10-10
UNPB 10-10
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
MCCB 6-18
BDH10
BDH12
BDH12
BDH12
BDP302
BDP304
BDP306
BDP308
BDP310
BDP313
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-51
14-51
14-51
14-51
14-50
14-50
14-50
14-50
14-50
14-50
BOS16422
BOS16423
BOS16424
BOS16425
BOS16426
BOS16451
BOS16452
BOS16453
BOS16454
BOS16455
BPLU 14-57
BPLU 14-57
BPLU 14-57
14-57
14-57
BPLU 14-57
BPLU 14-57
BPLU 14-57
BPLU 14-57
14-57
6-115
6-119
6-122
6-25
6-33
6-25
6-33
6-25
6-33
6-25
B160H
B160HH
B170
B170H
B170HH
B210
B2100
B2100H
B2100HH
B2100HH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
B330H
B330HH
B335
B335H
B335HH
B340
B340H
B340HH
B345
B345H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
BDP316
BDP4024
BDP4044
BDP4064
BDP4084
BDP4104
BE1
BE115
BE115H
BE120
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
RESG
MCCB
MCCB
MCCB
14-50
14-50
14-50
14-50
14-50
14-50
2-81
6-19
6-19
6-19
BOS16456
BQ1B010
BQ1B010QLD
BQ1B010QXD
BQ1B015
BQ1B015H
BQ1B015QLD
BQ1B015QXD
BQ1B020
BQ1B020H
BPLU 14-57
6-26
6-27
6-27
MCCB 6-26
MCCB 6-26
MCCB 6-27
MCCB 6-27
MCCB 6-26
MCCB 6-26
6-33
6-25
6-33
6-103
6-107
6-111
6-99
6-103
6-107
6-111
B2100R
B2110
B2110H
B2125
B2125H
B2125HH
B215
B215AF
B215AFH
B215H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-19
6-19
6-18
B345HH
B350
B350H
B350HH
B360
B360H
B360HH
B370
B370H
B370HH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
6-18
BE120H
BE130
BE130H
BE215
BE215H
BE220
BE220H
BE230
BE230H
BE240
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
BQ1B020QLD
BQ1B020QXD
BQ1B025
BQ1B025H
BQ1B025QLD
BQ1B025QXD
BQ1B030
BQ1B030H
BQ1B030QLD
BQ1B030QXD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MCCB
6-27
6-27
6-26
6-26
6-27
6-27
6-26
6-26
6-27
6-27
19-1
PRODUCT
INDEX
ASKE5
ASKE6
ASKE6
ASKL1
ASKL1
ASKL1
ASKL1
ASKL2
ASKL2
ASKL2
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
19
AMBP2
AMBP2
AMBP2
ASKE1
ASKE1
ASKE2
ASKE2
ASKE3
ASKE3
ASKE5
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
6-19
Product Index
Catalog
Number
PRODUCT
INDEX
19
BQ1B035
BQ1B035H
BQ1B035QLD
BQ1B035QXD
BQ1B040
BQ1B040H
BQ1B040QLD
BQ1B040QXD
BQ1B045
BQ1B045H
Product
Category
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-26
6-26
6-27
6-27
6-26
6-26
6-27
6-27
6-26
6-26
BQ3B025
BQ3B025H
BQ3B030
BQ3B030H
BQ3B035
BQ3B035H
BQ3B040
BQ3B040H
BQ3B045
BQ3B045H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
BQD6350
BQD6360
BQD6370
BQDA1
BQDA1BA
BQDA2
BQDBA
BQDHBD
BQDPLD
BQDST12
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-86
6-86
6-21
C1C42ML250CTS
C1C42QJ225CTS
C2E18BD100CTS
C2E18E4125CTS
C2E18FX225CTS
C2E18FX250CTS
C2E18ML125CTS
C2E18ML250CTS
C2E30BD100CTS
C2E30E4125CTS
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
CDT4B060
CDT4B070
CDT4B080
CDT4B090
CDT4B100
CDT4B110
CDT4B125
CDT4B150
CED62B015
CED62B020
MCCB
MCCB
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-35
6-35
6-27
6-27
6-26
6-26
6-27
6-27
6-26
6-26
6-27
6-27
BQ3B050
BQ3B050H
BQ3B060
BQ3B060H
BQ3B070
BQ3B070H
BQ3B080
BQ3B080H
BQ3B090
BQ3B090H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
BQDST120
BQDST120AAS
BQDST125
BQDST125DAS
BQDST12DAS
BQDST24
BQDST24
BQDST240
BQDST240AAS
BQDST24AAS
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
C2E30FX225CTS
C2E30FX250CTS
C2E30ML125CTS
C2E30ML250CTS
C2E42BD100CTS
C2E42E4125CTS
C2E42FX225CTS
C2E42FX250CTS
C2E42ML125CTS
C2E42ML250CTS
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
CED62B030
CED62B040
CED62B050
CED62B060
CED62B070
CED62B080
CED62B090
CED62B100
CED62B125
CED62S100A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-72
BQ3B100
BQ3B100H
BQ3S060
BQ3S100
BQD1100
BQD115
BQD120
BQD125
BQD130
BQD135
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-72
6-72
6-21
6-21
6-21
6-21
6-21
6-21
BQDST24DAS
BQDST277
BQDST277AAS
BQDST48
BQDST480
BQDST480AAS
BQDST48DAS
BQDST600
BQDST600AAS
BQFS1K
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-27
CBCF18
CBCF18
CBCM36
CBCM36
CBCM36
CBCM36
CBCM36
CBCP54
CBCP54
CBCP54
6-136
6-136
6-136
6-136
6-137
6-137
6-137
6-136
6-136
6-137
CED62S125A
CED63A001
CED63A001
CED63A003
CED63A005
CED63A010
CED63A025
CED63A030
CED63A040
CED63A050
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-72
6-66
6-66
6-66
6-66
6-66
6-66
6-66
6-66
6-66
MCCB
MCCB
MCCB
MCCB
6-27
6-87
6-87
6-87
6-138
6-138
6-138
6-138
6-138
6-138
CBCP54
CBCP54
CBCP54
CBCP54
CBTF
CBTF
CBTL
CBTL
CBTM
CBTP
6-137
6-137
6-137
6-137
6-136
6-136
6-137
6-137
6-137
6-137
CED63A100
CED63A125
CED63B015
CED63B020
CED63B030
CED63B040
CED63B050
CED63B060
CED63B070
CED63B080
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-66
6-66
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
CBTP
CCE125
CCF250
CCF250
CCL600
CCL600
CCL600
CCL600
CCM800K2
CCM800K3
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-137
6-83
6-37
6-83
6-40
6-42
6-44
6-83
6-83
6-83
CED63B090
CED63B100
CED63B110
CED63B125
CED63S100A
CED63S125A
CED6N12
CED6N12
CED6N1F
CED6N1F
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-72
6-72
5-13
6-34
5-8
6-34
CCN1200K2
CCN1200K3
CCQ225
CDT2B050
CDT2B060
CDT2B070
CDT2B080
CDT2B090
CDT2B100
CDT2B110
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-83
6-83
6-83
6-97
6-97
6-97
6-97
6-97
6-97
6-97
CED6N1S
CED6N1S
CED6N3R
CED6N3R
CFD63A150
CFD63A250
CFD63B070
CFD63B080
CFD63B090
CFD63B100
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
5-8
6-34
5-10
6-34
6-66
6-66
6-38
6-38
6-38
6-38
BQ1B045QLD
BQ1B045QXD
BQ1B050
BQ1B050H
BQ1B050QLD
BQ1B050QXD
BQ1B060
BQ1B060H
BQ1B060QLD
BQ1B060QXD
MCCB
BQ1B070
BQ1B070H
BQ2B010
BQ2B010QLD
BQ2B010QXD
BQ2B015
BQ2B015H
BQ2B015QLD
BQ2B015QXD
BQ2B020
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-26
6-27
6-27
6-26
6-26
6-27
6-27
6-26
BQ2B020H
BQ2B020QLD
BQ2B020QXD
BQ2B025
BQ2B025H
BQ2B025QLD
BQ2B025QXD
BQ2B030
BQ2B030H
BQ2B030QLD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-27
6-27
6-26
6-26
6-27
6-27
6-26
6-26
6-27
BQD140
BQD145
BQD150
BQD160
BQD170
BQD180
BQD190
BQD215
BQD220
BQD225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
BQFS2
BR2
BR3
BR4
BZLF3
BZLF3
BZLFBDC
BZLFBDC
BZLFRHSE
BZLFRHSE
BQ2B030QXD
BQ2B035
BQ2B035H
BQ2B035QLD
BQ2B035QXD
BQ2B040
BQ2B040H
BQ2B040QLD
BQ2B040QXD
BQ2B045
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-27
6-26
6-26
6-27
6-27
6-26
6-26
6-27
6-27
6-26
BQD230
BQD235
BQD240
BQD245
BQD250
BQD260
BQD270
BQD280
BQD290
BQD290
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
BZLL3
BZLL3
BZLLBDC
BZLLBDC
BZLLRHSE
BZLLRHSE
BZLM3
BZLMBDC
BZLMRHSE
BZLP3
BQ2B045H
BQ2B045QLD
BQ2B045QXD
BQ2B050
BQ2B050H
BQ2B050QLD
BQ2B050QXD
BQ2B060
BQ2B060H
BQ2B060QLD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-27
6-27
6-26
6-26
6-27
6-27
6-26
6-26
6-27
BQD3100
BQD315
BQD320
BQD325
BQD330
BQD335
BQD340
BQD345
BQD350
BQD360
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
BZLP3
BZLPBDC
BZLPBDC
BZLPRHSE
BZLPRHSE
C01FD64
C1A18BL100CTS
C1A18E4125CTS
C1A18FX250CTS
C1A18ML125CTS
6-139
6-139
6-139
6-139
6-139
MCCB 6-39
10-67
10-67
10-67
10-67
BQ2B060QXD
BQ2B070
BQ2B070H
BQ2B080
BQ2B080H
BQ2B090
BQ2B090H
BQ2B100
BQ2B100H
BQ2B110
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-27
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
BQD370
BQD380
BQD390
BQD6115
BQD6120
BQD6125
BQD6130
BQD6135
BQD6140
BQD6145
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
C1A18ML250CTS
C1A18QJ225CTS
C1A30BL100CTS
C1A30E4125CTS
C1A30FX250CTS
C1A30ML125CTS
C1A30ML250CTS
C1A30QJ225CTS
C1A42BL100CTS
C1A42E4125CTS
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
CDT2B125
CDT2B150
CDT3B050
CDT3B060
CDT3B070
CDT3B080
CDT3B090
CDT3B100
CDT3B110
CDT3B125
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
CFD63B110
CFD63B125
CFD63B150
CFD63B175
CFD63B200
CFD63B225
CFD63B250
CFD63H150
CFD63L150
CFD63S250A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-66
6-66
6-72
BQ2B110H
BQ2B125
BQ2B125H
BQ2H015
BQ2H020
BQ2H030
BQ2H040
BQ2H050
BQ2H060
BQ2H070
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
BQD6150
BQD6160
BQD6170
BQD6215
BQD6220
BQD6225
BQD6230
BQD6235
BQD6240
BQD6245
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
C1A42FX250CTS
C1A42ML125CTS
C1A42ML250CTS
C1A42QJ225CTS
C1C18BL100CTS
C1C18E4125CTS
C1C18FX250CTS
C1C18ML125CTS
C1C18ML250CTS
C1C18QJ225CTS
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
CDT3B150
CDT3D060
CDT3D100
CDT3D150
CDT3E060
CDT3E100
CDT3E150
CDT3N060
CDT3N100
CDT3N150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-97
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
CFS361C
CFS361C5
CFS361J
CFS361J5
CFS361JL
CFS362J
CFS362JL
CFS363J
CFS363JL
CFS364J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
6-26
6-26
6-26
6-72
6-72
6-26
6-26
6-26
6-26
6-26
BQD6250
BQD6260
BQD6270
BQD6315
BQD6320
BQD6325
BQD6330
BQD6335
BQD6340
BQD6345
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
6-21
C1C30BL100CTS
C1C30E4125CTS
C1C30FX250CTS
C1C30ML125CTS
C1C30ML250CTS
C1C30QJ225CTS
C1C42BL100CTS
C1C42E4125CTS
C1C42FX250CTS
C1C42ML125CTS
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
10-67
CDT3P060
CDT3P100
CDT3P150
CDT3U060
CDT3U100
CDT3U150
CDT3X060
CDT3X100
CDT3X150
CDT4B050
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-97
CFS365J
CFSAUX1NC
CFSAUX1NO
CFSAUXH1
CFSAUXH2
CFSH10B12
CFSH10B12
CFSH10B4
CFSH10BL12
CFSH10BL4
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-14
4-15
4-15
4-15
4-15
4-14
4-4
4-14
4-14
4-14
BQ2H080
BQ2H090
BQ2H100
BQ2S060
BQ2S100
BQ3B010
BQ3B015
BQ3B015H
BQ3B020
BQ3B020H
19-2
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
4-14
4-4
4-14
4-14
4-14
4-14
4-14
4-15
4-15
4-15
CJT3D400
CJT3E250
CJT3E400
CJT3N250
CJT3N400
CJT3P250
CJT3P400
CJT3U250
CJT3U400
CJT3X250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-106
CNLK30
CNLK42
CNT2B100
CNT2B120
CNT2B800
CNT2B900
CNT3B100
CNT3B120
CNT3B800
CNT3B900
UNPB 10-11
UNPB 10-11
6-117
6-117
6-117
6-117
MCCB 6-117
MCCB 6-117
6-117
6-117
CFSNFPA1
CFSNFPA2
CFSPLK
CFSS10200H
CFSS10400H
CFSS5200
CFSS5200H
CFSS5200H
CFSS5400
CFSS5400H
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-15
4-15
4-15
4-14
4-14
4-14
4-14
4-4
4-14
4-14
CJT3X400
CJT4B250
CJT4B300
CJT4B350
CJT4B400
CLD62H600
CLD62L600
CLD63B450
CLD63B500
CLD63B600
MCCB 6-106
6-105
6-105
6-105
6-105
MCCB 6-66
MCCB 6-66
MCCB 6-45
MCCB 6-45
MCCB 6-45
CNT3D100
CNT3D120
CNT3D800
CNT3E100
CNT3E120
CNT3E800
CNT3N100
CNT3N120
CNT3N800
CNT3P100
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
CFSS5400H
CFSSB100
CFSSB200
CFSSB400
CFSSB60
CFSTS100
CFSTS200
CFSTS400
CFT2B100
CFT2B110
HDSS
4-4
HDSS 4-15
HDSS 4-15
HDSS 4-15
HDSS 4-15
HDSS 4-15
HDSS 4-15
HDSS 4-15
MCCB 6-101
MCCB 6-101
CLD63H600
CLD63L600
CLD63S600A
CLKF
CLKP
CLKP
CLKP
CLM
CLM
CLM
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-66
6-66
6-72
6-130
6-131
6-131
6-131
16-158
16-159
NEMA 16-72
CNT3P120
CNT3P800
CNT3U100
CNT3U120
CNT3U800
CNT3X100
CNT3X120
CNT3X800
CNT4N100
CNT4N120
CFT2B125
CFT2B150
CFT2B175
CFT2B200
CFT2B225
CFT2B250
CFT3B100
CFT3B110
CFT3B125
CFT3B150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
CLM
CLRSJL3
CLT2B400
CLT2B500
CLT2B600
CLT3B400
CLT3B500
CLT3B600
CLT3D400
CLT3D600
NEMA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
16-73
6-91
6-109
6-109
6-109
6-109
6-109
6-109
6-110
6-110
CFT3B175
CFT3B200
CFT3B225
CFT3B250
CFT3D100
CFT3D150
CFT3D250
CFT3E100
CFT3E150
CFT3E250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-101
6-101
6-101
6-101
6-102
6-102
6-102
6-102
6-102
6-102
CLT3E400
CLT3E600
CLT3N400
CLT3N600
CLT3P400
CLT3P600
CLT3U400
CLT3U600
CLT3X400
CLT3X600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
CFT3N100
CFT3N150
CFT3N250
CFT3P100
CFT3P150
CFT3P250
CFT3U100
CFT3U150
CFT3U250
CFT3X100
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
CMD63A800
CMD63B500
CMD63B600
CMD63B700
CMD63B800
CMD63H800
CMD63L800
CMD63S800A
CMT2B600
CMT2B700
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
CFT3X150
CFT3X250
CFT4B100
CFT4B110
CFT4B125
CFT4B150
CFT4B175
CFT4B200
CFT4B225
CFT4B250
MCCB 6-102
MCCB 6-102
6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
CJD62H400
CJD62L400
CJD63B200
CJD63B225
CJD63B250
CJD63B300
CJD63B350
CJD63B400
CJD63H400
CJD63L400
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-66
6-66
6-41
6-41
6-41
6-41
6-41
6-41
6-66
6-66
CJD63S400A
CJT2B250
CJT2B300
CJT2B350
CJT2B400
CJT3B250
CJT3B300
CJT3B350
CJT3B400
CJT3D250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-72
6-105
6-105
6-105
6-105
6-105
6-105
6-105
6-105
6-106
MCCB
MCCB
Product
Category Page
6-59
6-59
6-120
6-120
6-120
6-121
6-121
6-121
6-121
6-121
CQD6350
CQD6360
CQDA1
CQDA1
CQDA1BA
CQDA1BA
CQDA2
CQDA2
CQDBA
CQDBA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
CPT3N160
CPT3P120
CPT3P160
CPT3U120
CPT3U160
CPT3X120
CPT3X160
CPT4N120
CPT4N160
CPT4P120
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
CQDFMB1
CQDFMB2
CQDFMB3
CQDOP
CQDOP34
CQDSMK
CQDST12
CQDST12
CQDST120
CQDST120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-87
6-87
6-87
6-88
6-88
6-87
6-23
6-31
6-23
6-31
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
CPT4P160
CPT4U120
CPT4U160
CPT4X120
CPT4X160
CQD1100
CQD115
CQD120
CQD125
CQD130
MCCB
MCCB
MCCB
MCCB
MCCB
6-121
6-121
6-121
6-121
6-121
6-29
6-29
6-29
6-29
6-29
CQDST120AAS
CQDST120AAS
CQDST125
CQDST125
CQDST125DAS
CQDST125DAS
CQDST12DAS
CQDST12DAS
CQDST24
CQDST24
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
CNT4N800
CNT4P100
CNT4P120
CNT4P800
CNT4U100
CNT4U120
CNT4U800
CNT4X100
CNT4X120
CNT4X800
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
CQD135
CQD140
CQD145
CQD150
CQD160
CQD170
CQD180
CQD190
CQD2100
CQD215
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CQDST240
CQDST240
CQDST240AAS
CQDST240AAS
CQDST24AAS
CQDST24AAS
CQDST24DAS
CQDST24DAS
CQDST277
CQDST277
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-110
COMEXT
COMEXT
COMEXT
COMEXT
COMEXT
COMEXT
COMEXT
COMKIT1
COMKIT1
COMKIT1
6-138
6-138
6-139
6-139
6-139
6-139
6-139
6-138
6-138
6-139
CQD220
CQD225
CQD230
CQD235
CQD240
CQD245
CQD250
CQD260
CQD270
CQD280
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CQDST277AAS
CQDST277AAS
CQDST48
CQDST48
CQDST480
CQDST480
CQDST480AAS
CQDST480AAS
CQDST48DAS
CQDST48DAS
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
6-23
6-31
6-66
6-52
6-52
6-52
6-52
6-66
6-66
6-72
6-113
6-113
COMKIT1
COMKIT2
COMKIT2
COMKIT2
COMMOD
COMMOD
COMMOD
COMMOD
COMMOD
COMMOD
6-139
6-139
6-139
6-139
6-138
6-138
6-139
6-139
6-139
6-139
CQD290
CQD3100
CQD315
CQD320
CQD325
CQD330
CQD335
CQD340
CQD345
CQD350
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CQDST600
CQDST600
CQDST600AAS
CQDST600AAS
CRHOESD
CRHOFSD
CRHOH
CRHOH
CRHOH
CRHOH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-23
6-31
6-23
6-31
6-88
6-88
4-12
4-12
4-12
4-12
CMT2B800
CMT3B600
CMT3B700
CMT3B800
CMT3D600
CMT3D800
CMT3E600
CMT3E800
CMT3N600
CMT3N800
6-113
6-113
6-113
MCCB 6-113
6-114
6-114
6-114
6-114
6-114
6-114
COMMOD
COMP232
COMP232
COMP232
COMP232
COMP232
COMP232
COMP232
COMPCA
COMPCA
6-139
6-138
6-138
6-139
6-139
6-139
6-139
6-139
6-138
6-138
CQD360
CQD370
CQD380
CQD390
CQD6120
CQD6125
CQD6130
CQD6135
CQD6140
CQD6145
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CRHOH
CRHOJSD
CRHOLMSD
CRHOS06VD
CRHOS06VD
CRHOS06VD
CRHOS20VD
CSAPELTU
CSAPELTU
CSAPELTU
MCCB
MCCB
MCCB
6-88
6-88
6-88
4-12
4-12
4-12
4-12
6-138
6-138
6-139
CMT3P600
CMT3P800
CMT3U600
CMT3U800
CMT3X600
CMT3X800
CMT4N600
CMT4N800
CMT4P600
CMT4P800
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
COMPCA
COMPCA
COMPCA
COMPCA
COMPCA
COMPRO
COMPRO
COMPRO
COMPRO
COMPRO
6-139
6-139
6-139
6-139
6-139
6-138
6-138
6-139
6-139
6-139
CQD6150
CQD6160
CQD6170
CQD6215
CQD6220
CQD6225
CQD6230
CQD6235
CQD6240
CQD6245
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CSAPELTU
CSAPELTU
CSAPELTU
CSAPELTU
CTB302
CTB304
CTB306
CTB308
CTB310
CTB313
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
6-139
6-139
6-139
6-139
14-51
14-51
14-51
14-51
14-51
14-51
CMT4U600
CMT4U800
CMT4X600
CMT4X800
CND63B100
CND63B120
CND63B900
CND63S120A
CNFS361
CNLK18
6-114
6-114
6-114
6-114
6-56
6-56
6-56
6-72
4-14
10-11
COMPRO
COMPRO
COMPS
COMPS
COMPS
COMPS
COMPS
COMPS
COMPS
CPD63B120
6-139
6-139
6-138
6-138
6-139
6-139
6-139
6-139
6-139
MCCB 6-59
CQD6250
CQD6260
CQD6270
CQD6315
CQD6320
CQD6325
CQD6330
CQD6335
CQD6340
CQD6345
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
6-29
CTB316
CTB4024
CTB4044
CTB4064
CTB4084
CTB4104
CTI2040L1200CU
CTI2440L1200CU
CTI3040L1200CU
D115
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
RESI
RESI
RESI
RESI
14-51
14-51
14-51
14-51
14-51
14-51
1-16
1-16
1-16
1-28
MCCB
MCCB
MCCB
MCCB
HDSS
UNPB
CPD63B140
CPD63B160
CPT3B120
CPT3B140
CPT3B160
CPT3D120
CPT3D160
CPT3E120
CPT3E160
CPT3N120
Catalog
Number
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-3
PRODUCT
INDEX
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
Product
Category Page
19
CFSH10R12
CFSH10R12
CFSH10R4
CFSH10RL12
CFSH10RL4
CFSH5B12
CFSH5R12
CFSL100
CFSL200
CFSL400
Catalog
Number
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
D11CEU1
D11CEU2
D11CFU1
D11CFU2
D11CJU2
D120
D130
D140
D150
D160
MCCB
MCCB
MCCB
MCCB
MCCB
RESI
Product
Category Page
Catalog
Number
6-88
6-88
6-88
6-88
6-88
1-28
1-28
1-28
1-28
1-28
DT600NK
DTF224
DTF224R
DTF321
DTF321R
DTF322
DTF322R
DTF323
DTF323R
DTF324
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-30
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
E1SSND69120GN
E2BMB
E2HBL
E2HBL
E2N12
E2N12
E2N1F
E2N1F
E2N1S
E2N1S
MCCB
5-6
MCCB 6-87
MCCB 12-23
MCCB 6-86
MCCB 5-13
MCCB 6-34
5-8
6-34
MCCB
5-8
MCCB 6-34
EC56857
EC56857
EC56858
EC56858
EC56858
EC56858
EC56858
EC56933S
EC56933S
EC56933S
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-74
2-81
2-10
2-26
2-73
2-74
2-81
2-10
2-26
2-73
ECHS100
ECHS100
ECHS100
ECHS100
ECHS100
ECHS125
ECHS125
ECHS125
ECHS125
ECHS125
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-8
2-26
3-20
3-30
5-14
1-35
1-8
2-26
3-20
3-30
1-28
1-28
1-28
1-28
1-28
1-28
6-130
6-130
6-130
6-130
DTF324R
DTF325
DTF326
DTF361
DTF362
DTF363
DTF363R
DTF364
DTF364R
DTF365
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
E2N3R
E2N3R
E2RH1
E2RHV9
E3030MB1400SCU
E3030MB3400SCU
E3030ML1400SCU
E3030ML3400SCU
E3RSHND69100GN
E3RSHND69120GN
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
MCCB
MCCB
5-10
6-34
6-88
6-88
1-12
1-12
1-12
1-12
5-6
5-6
EC56933S
EC56933S
EC64685
EC659-0120
EC659-0121
EC9747-1113
EC9747-1113
ECA10
ECA8
ECBX231M
RESG
RESG
RESG
RESG
RESG
RESG
BPLU
BUSW
RESG
2-74
2-81
2-10
2-10
2-10
2-10
2-26
14-51
14-51
1-25
ECHS125
ECHS125
ECHS150
ECHS150
ECHS150
ECHS150
ECHS150
ECHS150
ECHS150
ECHS200
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
5-14
5-14
1-35
1-8
2-26
3-20
3-30
5-14
5-14
1-35
DCAJFC3
DCAJRC3
DCALFC3
DCALRC3
DCAMFC3
DCAMRC3
DCAPFC3
DCAPFC3
DCAPRC3
DCAPRC3
6-131
6-131
6-131
6-131
6-131
6-131
6-131
6-131
6-131
6-131
DTGNF223NR
DTGNF223R
DTGNF224NR
DTGNF224R
DTGNF323NR
DTGNF323R
DTGNF324NR
DTGNF324R
DTNF221
DTNF222
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
E3RSND69100GN
E3RSND69120GN
E4242MB1300FCU
E4242MB1300SCU
E4242MB1400FCU
E4242MB1400SCU
E4242MB3300SCU
E4242MB3400FCU
E4242MB3400SCU
E4242ML1400FCU
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
5-6
5-6
1-12
1-12
1-12
1-12
1-12
1-12
1-12
1-12
ECBX231M
ECBX231M
ECBX231M
ECCP1
ECCP1
ECCP1U
ECCP2U
ECCP3
ECCP3
ECCP3U
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-26
1-35
6-19
1-35
1-8
2-81
2-81
2-10
2-26
2-74
ECHS200
ECHS200
ECHS200
ECHS200
ECHS200
ECHS200
ECHS250
ECHS250
ECHS250
ECHS250
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-8
2-26
3-20
3-30
5-14
5-14
1-35
1-8
2-26
3-20
DCHP
DCHP
DCHP
DCHP
DCHP
DCHP
DCHP
DCIP
DCIP
DCIP
6-130
6-130
6-131
6-131
6-131
6-131
6-131
6-130
6-130
6-131
DTNF223
DTNF224
DTNF224R
DTNF225
DTNF225R
DTNF321
DTNF322
DTNF323
DTNF323R
DTNF324
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
E4242ML1400SCU
E4242ML3400FCU
E4242ML3400SCU
EA
EA
EB
EB
EB3100S
EB3100S
EB3100S
RESI
RESI
RESI
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
1-12
1-12
1-12
5-12
6-34
5-12
6-34
1-10
5-8
6-27
ECCP3U
ECCP3U
ECCS1
ECCS2
ECDL1
ECGB10
ECGB10
ECGB101
ECGB14
ECGB141
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-81
2-81
1-35
1-35
1-35
1-35
1-8
1-35
1-35
1-35
ECHS250
ECHS250
ECHV000
ECHV200
ECHV200
ECHV250
ECHV250
ECHV250
ECHV250
ECHV300
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
3-30
5-14
2-26
2-26
2-81
2-26
2-81
3-20
5-14
2-26
DCIP
DCIP
DCIP
DCIP
DCXD3
DCXF3
DCXJ3
DCXL3
DCXM3
DCXN3
6-131
6-131
6-131
6-131
6-130
6-130
6-131
6-131
6-131
6-131
DTNF324R
DTNF325
DTNF326
DTNF327
DTNF361
DTNF361J
DTNF361R
DTNF361S
DTNF362
DTNF362J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
EB3225
EB3225F
EB3225F
EB3225S
EBF1
EC2
EC2
EC38594
EC38594
EC38594
MCCB
MCCB
RESG
RESG
RESG
6-28
1-10
5-9
5-9
10-11
5-12
6-37
2-10
2-26
2-74
ECGB142
ECGB20
ECGB201
ECGB202
ECGB5
ECGB5
ECGK
ECHA075
ECHA100
ECHA125
RESG 1-35
RESG 1-35
RESG 1-35
RESG 1-35
RESG 1-35
RESG
1-8
UNPB 10-11
RESG 3-20
3-20
3-20
ECHV300
ECHV300
ECHV300
ECHV350
ECHV350
ECHV350
ECHV350
ECHV400
ECHV400
ECHV400
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-81
3-20
5-14
2-26
2-81
3-20
5-14
2-26
2-81
3-20
6-131
10-31
10-42
10-31
10-42
10-31
6-88
6-88
4-8
6-88
DTNF362R
DTNF362S
DTNF363
DTNF363J
DTNF363R
DTNF363S
DTNF364
DTNF364J
DTNF364R
DTNF364S
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
3-29
EC38595
EC38595
EC38595
EC38595
EC38596
EC38596
EC38596
EC38596
EC38597
EC38597
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-10
2-26
2-74
2-85
2-10
2-26
2-74
2-85
2-10
2-26
ECHBD1
ECHBD1
ECHBD1
ECHBD1
ECHBK
ECHC000
ECHC000
ECHC000
ECHC200
ECHC200
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-24
1-35
6-18
6-26
2-74
2-10
2-26
2-85
2-10
2-26
ECHV400
ECINSGB14
ECINSGB20
ECINSGB5
ECJS
ECJS
ECLK1-2
ECLK1-2
ECLK1-2
ECLK2
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
5-14
1-35
1-35
1-35
2-10
2-81
1-35
1-8
2-26
1-35
4-8
6-88
3-30
3-30
3-30
3-30
3-30
3-30
7-12
7-12
DTNF365
DTNF365R
DTNF366
DTNF366R
DTNF367
DTNF367R
DTNF368
DTNF368R
E
E
HDSS 3-29
HDSS 3-29
HDSS 3-29
HDSS 3-29
HDSS 3-29
HDSS 3-29
HDSS 3-29
HDSS 3-29
NEMA 16-153
NEMA 16-154
EC38597
EC38597
EC38598
EC38598
EC38598
EC38598
EC38599
EC38599
EC38599
EC38599
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-74
2-85
2-10
2-26
2-74
2-85
2-10
2-26
2-74
2-85
ECHC200
ECHC250
ECHC250
ECHC250
ECHC300
ECHC300
ECHC300
ECHCRXA
ECHCRXA
ECHR075
RESG
RESG
RESG
RESG
RESG
RESG
RESG
ECLK2
ECLK2
ECLK2125
ECLK2150
ECLK2225
ECLK2SC
ECLK3
ECLK3
ECLK3125
ECLK3225
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-8
2-26
1-35
1-35
1-35
1-35
1-35
2-26
1-35
1-35
) 015
) 020
) 027
) 034
) 040
) 051
) 063
) 075
) 093
) 118
7-12
7-12
7-12
7-12
7-12
7-12
7-12
7-12
7-12
7-12
E0202MB1100
E0202MB1200
E0204ML1060F
E0204ML1060S
E0204ML1060S
E0204ML1125SCU
E0303ML3100S
E0303ML3100S
E0408ML1125F
E0816ML1125F
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-35
1-8
2-26
2-26
2-26
2-26
2-26
2-26
2-26
1-35
DT ( ) 145
DT ( ) 175
DT ( ) 220
DT ( ) 275
DT ( ) 330
DT ( ) 440
DT ( ) 550
DT ( ) 660
DT100NK
DT200NK
7-12
7-12
7-12
7-12
7-12
7-12
7-12
7-12
3-30
3-30
E0816ML1125FCU
E0816ML1125SCU
E1020MB1100FCGP
E1020MB1100FCGP
E1224ML1100FCU
E1224ML1100FCU
E1224ML1100FG
E1SSHND69100GN
E1SSHND69120GN
E1SSND69100GN
D215
D220
D230
D240
D250
D260
DCADFC3
DCADRC3
DCAFFC3
DCAFRC3
PRODUCT
INDEX
19
DCXP3
DFFP3
DFFP3
DFFP6
DFFP6
DFK1
DKL2
DKL3
DKR2
DKR2
DKR3
DKR3
DS100GK
DS200EK1
DS200EK2
DS200GK
DS468GK
DS800NK
DT ( ) 007
DT ( ) 011
DT (
DT (
DT (
DT (
DT (
DT (
DT (
DT (
DT (
DT (
19-4
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
PBSB
PBSB
PBSB
PBSB
PBSB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
Product
Category Page
Catalog
Number
RESI
RESI
RESI
Product
Category Page
Catalog
Number
RESG
2-85
2-10
2-26
2-85
2-10
2-26
2-85
2-26
2-85
2-81
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-10
1-10
1-10
1-10
5-8
1-10
1-10
5-8
1-9
1-9
EC38600
EC38600
EC38600
EC38600
EC4
EC4
EC56854
EC56854
EC56854
EC56855
RESG
RESG
RESG
RESG
MCCB
MCCB
RESG
RESG
RESG
RESG
2-10
2-26
2-74
2-85
5-12
6-41
2-73
2-74
2-81
2-73
ECHR075
ECHR100
ECHR100
ECHR125
ECHR125
ECHR150
ECHR150
ECHR200
ECHR200
ECHS000
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
5-14
2-81
5-14
2-81
5-14
2-81
5-14
2-81
5-14
1-35
ECLKB1
ECLKB1
ECLX068M
ECLX069M
ECLX071M
ECLX072M
ECLX073M
ECLX074M
ECLX075M
ECMBF125
RESI
RESI
RESI
RESI
RESI
RESI
RESI
MCCB
MCCB
MCCB
1-9
1-9
1-13
1-9
1-13
1-9
1-9
5-6
5-6
5-6
EC56855
EC56855
EC56856
EC56856
EC56856
EC56856
EC56856
EC56857
EC56857
EC56857
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-74
2-81
2-10
2-26
2-73
2-74
2-81
2-10
2-26
2-73
ECHS000
ECHS000
ECHS000
ECHS075
ECHS075
ECHS075
ECHS075
ECHS075
ECHS075
ECHS100
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-8
2-26
3-20
1-35
1-8
2-26
3-20
3-30
5-14
1-35
ECMBR1
ECMBR2
ECMLK125
ECMLK225
ECMM5J
ECMM5J
ECMMI5J
ECMMI5J
ECP10
ECP6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product
Category Page
RESG 1-35
RESG 1-35
RESG 1-35
RESG 1-35
RESG 2-74
RESG 2-81
RESG 2-74
RESG 2-81
BUSW 14-51
BUSW 14-51
Product Index
Catalog
Number
ECP6
ECP6
ECP6
ECPLD1
ECPLD1
ECPLD1
ECPLD1
ECPLD1
ECPLD125
ECPLD2
Product
Category
Page
BUSW 14-51
BUSW 14-51
BUSW 14-51
RESG 1-35
RESG 6-18
RESG 6-19
RESG 6-26
RESG 6-86
RESG 1-35
RESG 1-35
RESG
RESG
RESG
RESG
Catalog
Number
Product
Category Page
Catalog
Number
ED41B040
ED41B045
ED41B050
ED41B060
ED41B070
ED41B080
ED41B090
ED41B100
ED42B015
ED42B020
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ED63B060
ED63B070
ED63B080
ED63B090
ED63B100
ED63B110
ED63B125
ED63S100A
ED63S125A
ED6SS4
ED42B025
ED42B030
ED42B035
ED42B040
ED42B045
ED42B050
ED42B060
ED42B070
ED42B080
ED42B090
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ED6SS4
EE
EE
EGK
EJP302
EJP304
EJP306
EJP308
EJP310
EJP313
Product
Category Page
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-72
6-72
5-12
F657
F657
F657
F657D
F657D
F657D
F657D
F657D
F657D
F657D
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
4-21
4-21
4-21
10-61
10-61
10-61
10-61
10-61
10-61
10-61
FD62F250
FD62T070
FD62T070
FD62T080
FD62T080
FD62T090
FD62T090
FD62T100
FD62T100
FD62T110
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-37
6-38
6-37
6-38
6-37
6-38
6-37
6-38
6-37
MCCB
MCCB
UNPB
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
6-34
5-12
6-41
10-11
14-50
14-50
14-50
14-50
14-50
14-50
F657D
F657D
F657D
F657D
F657D
F657D
F671
F671
F671D
F671D
PBSB 4-21
PBSB 4-21
PBSB 4-21
PBSB 4-21
PBSB 4-21
PBSB 4-21
PBSB 10-50
PBSB 4-21
PBSB 10-61
PBSB 4-21
FD62T110
FD62T125
FD62T125
FD62T150
FD62T150
FD62T175
FD62T175
FD62T200
FD62T200
FD62T225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-37
6-38
6-37
6-38
6-37
6-38
6-37
6-38
6-37
14-50
14-50
14-50
14-50
14-50
14-50
6-138
6-138
6-139
6-139
F672
F672
F672D
F672D
F6N12
F6N12
F6N1F
F6N1S
F6N1S
F6N3R
PBSB 10-50
PBSB 4-21
PBSB 10-61
PBSB 4-21
5-13
6-37
MCCB
5-8
MCCB
5-8
MCCB 6-37
MCCB 5-10
FD62T225
FD62T250
FD62T250
FD63B070
FD63B080
FD63B090
FD63B100
FD63B110
FD63B125
FD63B150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-37
6-38
6-37
6-37
6-37
6-37
6-37
6-37
6-37
MCCB
MCCB
MCCB
6-37
6-88
6-88
6-132
6-132
6-133
6-133
6-133
6-133
6-133
FD63B175
FD63B200
FD63B225
FD63B250
FD63F250
FD63T070
FD63T070
FD63T070
FD63T080
FD63T080
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-37
6-37
6-37
6-37
6-37
6-38
6-38
6-37
6-38
ECQF3
ECQF3
ECQF3
ECQFL1
ECQFL2
ECQFL2
ECQL1
ECQL1
ECQLD3
ECQLD3
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-35
1-8
2-74
1-35
1-35
1-8
1-35
6-86
1-24
6-18
ED42B100
ED42B110
ED42B125
ED42S100A
ED42S125A
ED43B015
ED43B020
ED43B025
ED43B030
ED43B035
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-72
6-72
6-34
6-34
6-34
6-34
6-34
EJP316
EJP4024
EJP4044
EJP4064
EJP4084
EJP4104
ELTPHB
ELTPHB
ELTPHB
ELTPHB
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
MCCB
MCCB
MCCB
MCCB
ECQLD3
ECQLD3
ECQLN3
ECQML12
ECQML12
ECQTH2
ECQTH3
ECRLK250
ECSMK1
ECSN1
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
6-26
6-86
1-35
1-35
6-87
1-35
6-86
1-35
1-35
1-35
ED43B040
ED43B045
ED43B050
ED43B060
ED43B070
ED43B080
ED43B090
ED43B100
ED43B110
ED43B125
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ELTPHB
ELTPHB
ELTPHB
EMC5J
EP
EPC06
EPC08
EPC12
EPC18
EPC24
MCCB 6-139
MCCB 6-139
MCCB 6-139
RESG 2-26
MCCB 6-80
MCCB 6-80
MCCB 6-80
MCCB 6-80
MCCB 6-80
6-80
F6N3R
F6RH1
F6RHV9
FBCD3
FBCF3
FBCJ3
FBCL3
FBCM3
FBCP3
FBCP3
ECTS2
ECTS2
ED21B015
ED21B020
ED21B025
ED21B030
ED21B035
ED21B040
ED21B045
ED21B050
RESG
RESG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
1-35
1-8
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ED43S100A
ED43S125A
ED6
ED6
ED61B015
ED61B020
ED61B025
ED61B030
ED61B035
ED61B040
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-72
6-72
5-12
6-45
6-34
6-34
6-34
6-34
6-34
6-34
EPSB4DMK
EPSB4FMK
EPSBDMK
EPSBFMK
EPSP18V
EPSP18V
EPSP18V
EPSP18V
EPSP18V
EPSP18V
PWCB
PWCB
PWCB
PWCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-80
6-80
6-80
6-80
6-138
6-138
6-139
6-139
6-139
6-139
FC3022
FC3025
FC3042
FC3045
FC3062
FC3065
FC3085
FC3125
FC4022
FC4025
14-59
14-59
14-59
14-59
14-59
14-59
14-59
14-59
14-59
14-59
FD63T080
FD63T090
FD63T090
FD63T090
FD63T100
FD63T100
FD63T100
FD63T110
FD63T110
FD63T110
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-37
6-38
6-38
6-37
6-38
6-38
6-37
6-38
6-38
ED21B060
ED21B070
ED21B080
ED21B090
ED21B100
ED22B015
ED22B020
ED22B025
ED22B030
ED22B035
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ED61B040
ED61B050
ED61B060
ED61B070
ED61B080
ED61B090
ED61B100
ED62B015
ED62B020
ED62B025
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
EPSP18V
ETB302
ETB304
ETB306
ETB308
ETB310
ETB313
ETB316
ETB4024
ETB4044
MCCB
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
6-139
14-51
14-51
14-51
14-51
14-51
14-51
14-51
14-51
14-51
FC4042
FC4045
FC4062
FC4065
FC4085
FC4125
FCJK603
FCJK606
FCJK606
FCK203
HDSS
HDSS
HDSS
HDSS
14-59
14-59
14-59
14-59
14-59
14-59
4-11
4-11
4-11
4-11
FD63T125
FD63T125
FD63T125
FD63T150
FD63T150
FD63T150
FD63T175
FD63T175
FD63T175
FD63T200
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-38
6-38
6-37
6-38
6-38
6-37
6-38
6-38
6-37
ED22B040
ED22B045
ED22B050
ED22B060
ED22B070
ED22B070
ED22B090
ED22B100
ED22S100A
ED23B015
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-72
6-34
ED62B030
ED62B035
ED62B040
ED62B045
ED62B050
ED62B060
ED62B070
ED62B080
ED62B090
ED62B100
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ETB4064
ETB4084
ETB4104
EWK1
EWK2
EX11
EXSTD
F353SSDTK
F354SSDTK
F355SSDTK
BUSW
BUSW
BUSW
UNPB
UNPB
MCCB
14-51
14-51
14-51
10-11
10-11
6-86
6-86
HDSS 3-29
HDSS 3-29
HDSS 3-29
FCK206
FCK206
FCK206
FCK606
FCK606
FCK610
FCK610
FCK610
FCK610
FCK620
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
FD63T200
FD63T200
FD63T225
FD63T225
FD63T225
FD63T250
FD63T250
FD63T250
FD6HB1
FD6PL1
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-38
6-37
6-38
6-38
6-37
6-38
6-38
6-86
6-86
ED23B020
ED23B025
ED23B030
ED23B035
ED23B040
ED23B045
ED23B050
ED23B060
ED23B070
ED23B080
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
ED62S100A
ED63A001
ED63A002
ED63A003
ED63A005
ED63A010
ED63A025
ED63A030
ED63A040
ED63A050
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-72
6-66
6-66
6-66
6-66
6-66
6-66
6-66
6-66
6-66
F56B
F602
F602
F602D
F602D
F6150D
F6150D
F6162D
F6162D
F6162D
UNPB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
10-10
10-50
4-21
10-61
4-21
10-61
4-21
10-61
12-26
4-22
FCK620
FCK620
FCK620
FCRK203
FCRK206
FCRK206
FCRK206
FCRK606
FCRK606
FD62B070
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
MCCB
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
6-37
FD6SS4
FD6SS4
FDFBEL
FDFBEL4
FDFBER
FDFBER4
FDFBFL
FDFBFL4
FDFBFR
FDFBFR4
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
5-12
6-37
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
ED23B090
ED23B100
ED23S100A
ED2HPL
ED2HPL
ED41B015
ED41B020
ED41B020
ED41B030
ED41B035
MCCB 6-34
MCCB 6-34
MCCB 6-72
MCCB 12-23
MCCB 6-86
MCCB 6-34
MCCB 6-34
MCCB 6-34
MCCB 6-34
MCCB 6-34
ED63A100
ED63A125
ED63B015
ED63B020
ED63B025
ED63B030
ED63B035
ED63B040
ED63B045
ED63B050
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-66
6-66
6-34
6-34
6-34
6-34
6-34
6-34
6-34
6-34
F657
F657
F657
F657
F657
F657
F657
F657
F657
F657
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
10-50
10-50
10-50
10-50
10-50
10-50
10-50
4-21
4-21
4-21
FD62B080
FD62B090
FD62B100
FD62B110
FD62B125
FD62B150
FD62B175
FD62B200
FD62B225
FD62B250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-37
FDFS06L
FDFS06L
FDFS06L
FDFS06R
FDFS06R
FDFS06R
FDFS20L
FDFS20R
FDH10
FDH10
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-5
PRODUCT
INDEX
RESG
RESG
RESG
RESG
RESG
6-18
6-19
6-26
6-86
1-35
2-10
2-26
2-74
2-74
2-81
19
ECPLD2
ECPLD2
ECPLD2
ECPLD2
ECPLD2R
ECPP
ECPP
ECPP
ECPP
ECPP
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
FDH10
FDH10
FDH10
FDH10
FDH104
FDH20
FDH20
FDH204
FDS06L
FDS06L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
FHOJC036
FHOJC036
FHOJC048
FHOJC048
FHOJC060
FHOJC060
FHOJC072
FHOJC084
FHOJC096
FHOJC120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-89
6-89
4-12
6-89
4-12
6-89
6-89
6-89
6-89
6-89
G1224L1125CP
G1224L1125CU
G1224L1125CUSG
G1224L1200CU
G1224L3125CU
G1224L3200CU
G1624B1100
G1624B1100CU
G1624L1125
G1624L1125CP
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-8
1-7
1-7
1-7
1-11
1-11
1-7
1-7
1-7
1-8
GF225NH
GF225NR
GF225NRH
GF226N
GF226NH
GF226NR
GF226NRH
GF321N
GF321NR
GF322N
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
HB2B035
HB2B040
HB2B045
HB2B050
HB2B060
HB2B070
HB2B080
HB2B090
HB2B100
HB2B110
FDS06L
FDS06R
FDS06R
FDS06R
FDS20L
FDS20R
FE100
FE200
FEP302
FEP304
MCCB
MCCB
MCCB
MCCB
FHOJC144
FHOLM036
FHOLMBO
FHON048
FHONBO
FHONC048
FHONC048
FHONC060
FHONC072
FHONC084
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
BUSW
BUSW
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
14-50
14-50
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
G1624L1125CU
G1624L1125CUSG
G1630B1150
G1836L3150CU
G1836L3200CU
G2020B1100
G2020B1100CP
G2020B1100CU
G2020L1125
G2020L1125CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-7
1-7
1-7
1-11
1-11
1-7
1-8
1-7
1-7
1-7
GF322NR
GF323N
GF323NR
GF324N
GF324NR
GF325N
GF325NH
GF325NR
GF325NRH
GF326N
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
HB2B125
HB3B010
HB3B015
HB3B020
HB3B025
HB3B030
HB3B035
HB3B040
HB3B045
HB3B050
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
FEP306
FEP308
FEP310
FEP313
FEP316
FEP4024
FEP4044
FEP4064
FEP4084
FEP4104
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-50
14-50
14-50
14-50
14-50
14-50
14-50
14-50
14-50
14-50
FHONC096
FHONC120
FHONC144
FHOS06036L
FHOS06036L
FHOS06036L
FHOS06036R
FHOS06036R
FHOS06036R
FHOS06L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-89
6-89
6-89
4-12
4-12
4-12
4-12
4-12
4-12
4-12
G2030B1150
G2030B1150CU
G2030L1125CUSG
G2030L1150
G2030L1150CU
G2030L1150CUSG
G2040B1200
G2040B1200CU
G2040L1200
G2040L1200CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-7
GF326NH
GF326NR
GF326NRH
GG01212N
GG0121FN/SN
GG0123RN
GH223
GH223
GH223
GH24
GDSS
GDSS
GDSS
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
3-8
3-8
3-8
5-13
5-8
5-10
3-34
3-34
3-34
3-34
HB3B060
HB3B070
HB3B080
HB3B090
HB3B100
HBB21
HBB22
HBB612
HBB612
HBB62
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
6-26
6-26
6-26
6-26
6-26
3-34
3-34
3-34
3-34
3-34
FG0221S
FG02512
FG0251F
FG0251S
FG0253R
FG0254S
FG02579
FHOE036
FHOEBO
FHOEC036
6-100
6-100
6-100
6-100
6-100
6-100
6-100
MCCB 6-89
MCCB 6-89
MCCB 4-12
FHOS06L
FHOS06L
FHOS06R
FHOS06R
FHOS06R
FHOS20036L
FHOS20036R
FHOS20L
FHOS20R
FHVF3R
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
6-128
G2424B1100CU
G2424B1125
G2424L1125
G2430B1150
G2430L1125CUSG
G2440B1200
G2440L1125CU
G2440L1200
G2440L1200CU
G2442B3150CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-7
1-11
GMBC1
GMBC2
GNF321
GNF321R
GNF322
GNF322R
GNF323
GNF323R
GNF324
GNF324R
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
2-82
2-82
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
HBB63
HBB64
HBB656
HBB656
HBB67A
HBB68
HBDE
HBDF
HBDF
HBDL
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
MCCB 6-86
MCCB 6-136
MCCB 6-136
MCCB 6-137
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC036
FHOEC048
FHOEC048
FHOEC048
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
4-12
4-7
6-89
4-12
4-7
6-89
FHVF3RB
FHVF4X
FHVL3R
FHVL3RB
FHVL4X
FMHOS
FMPG1
FMPG2
FMPG3
FP9508
6-128
6-128
6-128
6-128
6-128
MCCB 6-88
6-87
6-87
6-87
MCCB 6-87
G2442L3150CU
G2442L3200CU
G3030B1100CP
G3030B1100CU
G3030B1150
G3030B1150CP
G3030B1150CU
G3030B3100CU
G3030L1200
G3030L1200CU
RESI
RESI
RESI
RESI
RESI
1-11
1-11
1-8
1-7
1-7
1-8
1-7
1-11
1-7
1-7
GNF325
GNF326
GSGK60
GSGK60
GSRK321
H55890
H56476
H56476
H56732
H56732-2
3-8
3-8
3-19
3-33
3-17
2-10
2-10
2-73
2-10
2-73
HBDL
HBDM
HBDP
HBDP
HCL612
HCL623
HCL65
HCL65678
HCL65678
HCP327HT
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
VBSS
6-137
6-137
6-137
6-137
3-20
3-20
3-20
3-20
3-20
4-22
FHOEC060
FHOEC060
FHOEC072
FHOEC084
FHOEC096
FHOEC120
FHOEC144
FHOF036
FHOFBO
FHOFC036
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
FP9555
FP9556
FR325DTK
FR326DTK
FR355DTK
FXD62B070
FXD62B080
FXD62B090
FXD62B100
FXD62B110
MCCB
MCCB
HDSS
HDSS
HDSS
MCCB
MCCB
MCCB
MCCB
MCCB
6-87
6-87
3-29
3-29
3-29
6-37
6-37
6-37
6-37
6-37
G3040B1200
G3040B1200CP
G3040B1200CPP
G3040B1200CU
G3040L1125CU
G3040L1200
G3040L1200CP
G3040L1200CP1
G3040L1200CPP
G3040L1200CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-7
1-8
1-8
1-7
1-7
1-7
1-8
1-8
1-8
1-7
H56732-M
H58022
H58852
H59676
H60162
H68752-1
HA161234
HA161234
HA161234
HA165678
HDSS
HDSS
HDSS
HDSS
2-73
2-10
2-10
2-10
2-73
2-73
3-18
3-30
4-9
3-18
HCP327VT
HCP328HT
HCP328VT
HCP367H
HCP367HJ400
HCP367HJ600
HCP367V
HCP367VJ400
HCP367VJ600
HCP368H
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-22
4-22
4-22
4-22
4-22
4-22
4-22
4-22
4-22
4-22
FHOFC048
FHOFC060
FHOFC072
FHOFC084
FHOFC096
FHOFC120
FHOFC144
FHOH
FHOH
FHOH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
6-89
FXD62B125
FXD62B150
FXD62B175
FXD62B200
FXD62B225
FXD62B250
FXD62S250A
FXD63A250
FXD63B070
FXD63B080
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-37
6-37
6-37
6-37
6-37
6-72
6-66
6-37
6-37
G3040L1200CUSG
G3042B3200CU
G3042L3200CU
G4040B1200
G4040B1200CP
G4040B1200CP1
G4040B1200CPP
G4040B1200CU
G4040B1200CUSGP
G4040L1200
RESI
RESI
RESI
RESI
RESI
HA165678
HA165678
HA2
HA261234
HA261234
HA261234
HA265678
HA265678
HA265678
HA361234
HDSS 3-30
HDSS
4-9
NEMA 16-89
HDSS 3-18
HDSS 3-30
HDSS
4-9
HDSS 3-18
HDSS 3-30
HDSS
4-9
HDSS 3-18
HCP368V
HCPCLP
HCPST120
HCPST125
HCPST240
HCPST277
HCPST48
HCPST480
HDG2B050L
HDG2B060L
VBSS
VBSS
VBSS
RESI
RESI
RESI
RESI
1-7
1-11
1-11
1-7
1-8
1-8
1-8
1-7
1-8
1-7
4-22
4-22
4-22
4-22
4-22
4-22
4-22
4-22
6-97
6-97
FHOH
FHOH4
FHOH4
FHOH4
FHOH4
FHOHN
FHOHN4
FHOHS
FHOHS
FHOHS
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-89
6-89
6-89
6-89
6-89
6-89
6-89
4-12
4-12
4-12
FXD63B090
FXD63B100
FXD63B110
FXD63B125
FXD63B150
FXD63B175
FXD63B200
FXD63B225
FXD63B250
FXD63H150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-37
6-66
G4040L1200CPP
G4040L1200CU
G4040L1200CUSG
G4242B1225CU
G4242B3200CU
G4242B3225CU
G4242L1225CU
G4242L3225CU
GF01ED60
GF01ED60B0
RESI
RESI
RESI
RESI
RESI
RESI
RESI
MCCB
MCCB
1-8
1-7
1-7
1-7
1-11
1-11
1-7
1-11
6-36
6-36
HA361234
HA365678
HA365678
HAS1
HB
HB1B015
HB1B020
HB1B025
HB1B030
HB1B035
HDSS
4-9
HDSS 3-18
HDSS
4-9
MCCB 6-89
NEMA 16-84
MCCB 6-26
MCCB 6-26
6-26
MCCB 6-26
6-26
HDG2B070L
HDG2B080L
HDG2B090L
HDG2B100L
HDG2B110L
HDG2B125L
HDG2B150L
HDG2F150
HDG3B050L
HDG3B060L
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS
FHOHS4
FHOJ036
FHOJBO
FHOJC036
FHOJC036
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
4-12
4-12
6-89
6-89
4-12
4-12
FXD63L150
FXD63L150
FXD63S250A
G1212L1125
G1212L1125CU
G1224B10060GC
G1224B1100
G1224B1100CU
G1224B6060GC
G1224L1125
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
RESI
RESI
6-66
6-66
6-72
1-7
1-7
1-13
1-7
1-7
1-13
1-7
GF01ED60BC
GF221N
GF221NR
GF222N
GF222NR
GF223N
GF223NR
GF224N
GF224NR
GF225N
MCCB
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
GDSS
6-36
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
HB1B040
HB1B045
HB1B050
HB1B060
HB1B070
HB2B010
HB2B015
HB2B020
HB2B025
HB2B030
MCCB
HDG3B070L
HDG3B080L
HDG3B090L
HDG3B100L
HDG3B110L
HDG3B125L
HDG3B150L
HDG3D060L
HDG3D100L
HDG3D150L
19-6
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
GDSS
GDSS
HDSS
HDSS
HDSS
MCCB
MCCB
MCCB
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
VBSS
VBSS
VBSS
VBSS
MCCB
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-98
6-98
6-98
Product Index
Catalog
Number
HDG3E060L
HDG3E100L
HDG3E150L
HDG3F150
HDG3F150
HDG3F150
HDG3N060L
HDG3N100L
HDG3N150L
HDG3P060L
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-98
6-98
6-98
6-97
6-98
6-98
6-98
6-98
6-98
6-98
HED41B100
HED42B015
HED42B020
HED42B025
HED42B030
HED42B035
HED42B040
HED42B045
HED42B050
HED42B060
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HEG4B125L
HES3S100L
HES3S125L
HF221J
HF221N
HF221NR
HF221S
HF222J
HF222N
HF222NR
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
6-32
6-72
6-72
3-10
3-10
3-10
3-10
3-10
3-10
3-10
HF327NR
HF327S
HF328N
HF328NR
HF361
HF361J
HF361JCH
HF361JCHW
HF361JPN
HF361JW
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-10
3-10
3-10
3-11
3-11
3-15
3-15
3-15
3-13
HF461
HF461J
HF462
HF462J
HF463
HF463J
HF464
HF464J
HF63CX
HF63CX
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDG3P100L
HDG3P150L
HDG3U060L
HDG3U100L
HDG3U150L
HDG3X060L
HDG3X100L
HDG3X150L
HDG4B050L
HDG4B060L
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-97
6-97
HED42B070
HED42B080
HED42B090
HED42B100
HED42B110
HED42B125
HED43B015
HED43B020
HED43B025
HED43B030
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HF222S
HF223J
HF223N
HF223NR
HF223S
HF224J
HF224N
HF224NR
HF224S
HF225N
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
HF361L
HF361N
HF361NR
HF361NX
HF361R
HF361RL
HF361S
HF361SCH
HF361SCHW
HF361SPN
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-11
3-16
3-11
3-11
3-11
3-15
3-15
3-15
HF661J
HF661S
HF662J
HF662S
HF663J
HF663S
HF664J
HF664S
HFB
HFB21
HDSS 3-14
HDSS 3-14
HDSS 3-14
HDSS 3-14
HDSS 3-14
HDSS 3-14
HDSS 3-14
HDSS 3-14
NEMA 16-87
HDSS 3-34
HDG4B070L
HDG4B080L
HDG4B090L
HDG4B100L
HDG4B110L
HDG4B125L
HDG4B150L
HDG4F150
HDM3H150L
HDM3L150L
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
MCCB 6-124
MCCB 6-124
HED43B035
HED43B040
HED43B045
HED43B050
HED43B060
HED43B070
HED43B080
HED43B090
HED43B100
HED43B110
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HF225NH
HF225NR
HF225NRH
HF226N
HF226NH
HF226NR
HF226NRH
HF227N
HF227NR
HF228N
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
HF361SW
HF362
HF362J
HF362JCH
HF362JCHW
HF362JPN
HF362JW
HF362N
HF362NR
HF362NX
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-13
3-11
3-11
3-15
3-15
3-15
3-13
3-11
3-11
3-16
HFB22
HFB612
HFB612
HFB62
HFB63
HFB64
HFB65
HFB66
HFB67A
HFB68
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
HDM3M150L
HDS2S150L
HDS3S150L
HEB1B015B
HEB1B020B
HEB1B025B
HEB1B030B
HEB1B035B
HEB1B040B
HEB1B045B
MCCB 6-124
MCCB 6-123
MCCB 6-123
MCCB 6-24
MCCB 6-24
MCCB 6-24
MCCB 6-24
MCCB 6-24
MCCB 6-24
MCCB 6-24
HED43B125
HEG1B015L
HEG1B020L
HEG1B025L
HEG1B030L
HEG1B035L
HEG1B040L
HEG1B045L
HEG1B050L
HEG1B060L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF228NR
HF261
HF261J
HF261R
HF261S
HF262
HF262J
HF262R
HF262S
HF263
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
HF362R
HF362RL
HF362S
HF362SCH
HF362SCHW
HF362SPN
HF362SW
HF363
HF363J
HF363JCH
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-11
3-15
3-15
3-15
3-13
3-11
3-11
3-15
HFD62B070
HFD62B080
HFD62B090
HFD62B100
HFD62B110
HFD62B125
HFD62B150
HFD62B175
HFD62B200
HFD62B225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
HEB1B050B
HEB1B060B
HEB1B070B
HEB1B080B
HEB1B090B
HEB1B100B
HEB1B110B
HEB1B125B
HEB2B015B
HEB2B020B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
HEG1B070L
HEG1B080L
HEG1B090L
HEG1B100L
HEG1B110L
HEG1B125L
HEG2B015L
HEG2B020L
HEG2B025L
HEG2B030L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF263J
HF263R
HF263S
HF265
HF265J
HF265R
HF265S
HF266
HF266J
HF266R
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
HF363JCHW
HF363JW
HF363N
HF363NR
HF363NX
HF363R
HF363S
HF363SCH
HF363SCHW
HF363SW
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-15
3-13
3-11
3-11
3-16
3-11
3-11
3-15
3-15
3-13
HFD62B250
HFD62F250
HFD63B070
HFD63B080
HFD63B090
HFD63B100
HFD63B110
HFD63B125
HFD63B150
HFD63B175
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
6-38
HEB2B025B
HEB2B030B
HEB2B035B
HEB2B040B
HEB2B045B
HEB2B050B
HEB2B060B
HEB2B070B
HEB2B080B
HEB2B090B
MCCB
MCCB
MCCB
HEG2B035L
HEG2B040L
HEG2B045L
HEG2B050L
HEG2B060L
HEG2B070L
HEG2B080L
HEG2B090L
HEG2B100L
HEG2B110L
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF266S
HF321J
HF321JCH
HF321N
HF321NR
HF321NX
HF321S
HF321SCH
HF322J
HF322JCH
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-10
3-15
3-10
3-10
3-16
3-10
3-15
3-10
3-15
HF364
HF364J
HF364JW
HF364N
HF364NR
HF364NX
HF364R
HF364S
HF364SW
HF365
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-13
3-11
3-11
3-16
3-11
3-11
3-13
3-11
HFD63B200
HFD63B225
HFD63B250
HFD63F250
HFG2B100L
HFG2B110L
HFG2B125L
HFG2B150L
HFG2B175L
HFG2B200L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-38
6-38
6-38
6-38
6-101
6-101
6-101
6-101
6-101
6-101
HEB2B100B
HEB2B110B
HEB2B125B
HEB3B015B
HEB3B020B
HEB3B025B
HEB3B030B
HEB3B035B
HEB3B040B
HEB3B045B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
HEG2B125L
HEG3B015L
HEG3B020L
HEG3B025L
HEG3B030L
HEG3B035L
HEG3B040L
HEG3B045L
HEG3B050L
HEG3B060L
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF322JPN
HF322N
HF322NR
HF322NX
HF322S
HF322SCH
HF323J
HF323JCH
HF323N
HF323NR
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-15
3-10
3-10
3-16
3-10
3-15
3-10
3-15
3-10
3-10
HF365H
HF365J
HF365JW
HF365N
HF365NR
HF365R
HF365RH
HF365S
HF365SW
HF366
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-13
3-11
3-11
3-11
3-11
3-11
3-13
3-11
HFG2B225L
HFG2B250L
HFG2F250
HFG3B100L
HFG3B110L
HFG3B125L
HFG3B150L
HFG3B175L
HFG3B200L
HFG3B225L
6-101
6-101
MCCB 6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
HEB3B050B
HEB3B060B
HEB3B070B
HEB3B080B
HEB3B090B
HEB3B100B
HEB3B110B
HEB3B125B
HED41B015
HED41B020
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-35
6-35
HEG3B070L
HEG3B080L
HEG3B090L
HEG3B100L
HEG3B110L
HEG3B125L
HEG4B015L
HEG4B020L
HEG4B025L
HEG4B030L
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF323S
HF323SCH
HF324J
HF324N
HF324NR
HF324S
HF325J
HF325N
HF325N
HF325NH
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-15
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
HF366H
HF366J
HF366JW
HF366N
HF366NR
HF366R
HF366RH
HF366S
HF367
HF367J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-13
3-11
3-11
3-11
3-11
3-11
3-11
3-11
HFG3B250L
HFG3D100L
HFG3D150L
HFG3D250L
HFG3E100L
HFG3E150L
HFG3E250L
HFG3F250
HFG3F250
HFG3F250
6-101
6-102
6-102
6-102
6-102
6-102
6-102
MCCB 6-101
MCCB 6-102
MCCB 6-102
HED41B025
HED41B030
HED41B035
HED41B040
HED41B045
HED41B050
HED41B060
HED41B070
HED41B080
HED41B090
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HEG4B035L
HEG4B040L
HEG4B045L
HEG4B050L
HEG4B060L
HEG4B070L
HEG4B080L
HEG4B090L
HEG4B100L
HEG4B110L
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
HF325NRH
HF325S
HF326J
HF326N
HF326NH
HF326NR
HF326NRH
HF326S
HF327J
HF327N
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
3-10
HF367N
HF367NR
HF367R
HF367S
HF368
HF368J
HF368N
HF368NR
HF368R
HF368S
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
3-11
HFG3N100L
HFG3N150L
HFG3N250L
HFG3P100L
HFG3P150L
HFG3P250L
HFG3U100L
HFG3U150L
HFG3U250L
HFG3X100L
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
MCCB
MCCB
MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-7
PRODUCT
INDEX
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
19
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
3-14
3-14
3-14
3-14
3-14
3-14
3-14
3-14
3-33
4-4
Product Index
Catalog
Number
Product
Category
PRODUCT
INDEX
19
HFG3X150L
HFG3X250L
HFG4B100L
HFG4B110L
HFG4B125L
HFG4B150L
HFG4B175L
HFG4B200L
HFG4B225L
HFG4B250L
Page
Catalog
Number
Product
Category Page
6-102
6-102
6-101
6-101
6-101
6-101
6-101
6-101
6-101
6-101
HHFD63B175
HHFD63B200
HHFD63B225
HHFD63B250
HHFD63F250
HHJD62B200
HHJD62B225
HHJD62B250
HHJD62B300
HHJD62B350
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Catalog
Number
Product
Category Page
MCCB
MCCB
6-38
6-38
6-38
6-38
6-38
6-41
6-41
6-41
6-41
6-41
HL612
HL612
HL612
HL612
HL612
HL612
HL612
HL63
HL63
HL64
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
HM6123
HM6123
HM6123
HM6123
HM64
HM64
HM65
HM65
HM66
HM66
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
HND63B120
HND63B800
HND63B900
HND63F120
HND678
HNF261
HNF261J
HNF261R
HNF261S
HNF262
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
6-56
6-56
6-56
6-56
3-30
3-12
3-12
3-12
3-12
3-12
HDSS
HDSS
3-34
3-34
3-34
3-34
6-52
6-52
6-52
6-52
6-52
6-52
HNF262J
HNF262R
HNF262S
HNF263
HNF263J
HNF263R
HNF263S
HNF265
HNF265J
HNF265R
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-12
3-12
3-12
3-12
3-12
3-12
3-12
3-12
3-12
3-12
6-52
6-52
6-52
6-52
6-113
6-113
6-113
6-113
6-113
6-113
HNF265S
HNF266
HNF266J
HNF266R
HNF266S
HNF3030CX
HNF3060CX
HNF3100CX
HNF361
HNF361J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-12
3-12
3-12
3-12
3-12
3-32
3-32
3-32
3-12
3-12
HFG4F250
HFM3H250L
HFM3L250L
HFM3M250L
HFS2S250L
HFS3S250L
HFXD62S250A
HFXD63S250A
HG261234
HG2656
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
6-101
6-124
6-124
6-124
6-123
6-123
6-72
6-72
3-19
3-19
HHJD62B400
HHJD62F400
HHJD63B200
HHJD63B225
HHJD63B250
HHJD63B300
HHJD63B350
HHJD63B400
HHJD63F400
HHLD62B250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-41
6-41
6-41
6-41
6-41
6-41
6-41
6-41
6-45
HL64
HL65678
HL65678
HL65678
HL65678
HL67A
HL67A
HL9419
HL9419
HLC612
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
MCCB 12-23
MCCB 6-86
HDSS 3-19
HM678
HM678
HM67A
HM67A
HMD62B500
HMD62B600
HMD62B700
HMD62B800
HMD62F800
HMD63B500
HG61234
HG61234
HG61234
HG61234
HG656
HG656
HG656
HG678
HG678
HH6123
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-19
3-19
3-30
4-9
3-19
3-30
4-9
3-19
3-30
3-34
HHLD62B300
HHLD62B350
HHLD62B400
HHLD62B450
HHLD62B500
HHLD62B600
HHLD62F600
HHLD62T450
HHLD62T500
HHLD62T600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
HLC612
HLC63
HLC63
HLC64
HLC64
HLC65678
HLC65678
HLD62B250
HLD62B300
HLD62B350
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
MCCB
MCCB
MCCB
4-9
3-19
4-9
3-19
4-9
3-19
4-9
6-45
6-45
6-45
HMD63B600
HMD63B700
HMD63B800
HMD63F800
HMG2B600L
HMG2B700L
HMG2B800L
HMG2F800
HMG3B600L
HMG3B700L
HH6123
HH6123
HH6123
HH6123
HH6123
HH6123
HH6123
HH64
HH64
HH65678
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
HHLD63B250
HHLD63B300
HHLD63B350
HHLD63B400
HHLD63B450
HHLD63B500
HHLD63B600
HHLD63F600
HHLD63T450
HHLD63T500
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
HLD62B400
HLD62B450
HLD62B500
HLD62B600
HLD62F600
HLD63B250
HLD63B300
HLD63B350
HLD63B400
HLD63B450
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
6-45
HMG3B800L
HMG3D600L
HMG3D800L
HMG3E600L
HMG3E800L
HMG3F800
HMG3F800
HMG3F800
HMG3N600L
HMG3N800L
6-113
6-114
6-114
6-114
6-114
6-113
6-114
6-114
6-114
6-114
HNF361JCH
HNF361JCHW
HNF361JPN
HNF361JW
HNF361R
HNF361RL
HNF361S
HNF361SCH
HNF361SCHW
HNF361SPN
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-15
3-15
3-15
3-13
3-12
3-12
3-12
3-15
3-15
3-15
HH65678
HH65678
HH65678
HH65678
HH65678
HH65678
HH65678
HH65678
HH68
HH68
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-34
HHLD63T600
HJD62B200
HJD62B225
HJD62B250
HJD62B300
HJD62B350
HJD62B400
HJD62F400
HJD63B200
HJD63B225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-41
6-41
6-41
6-41
6-41
6-41
6-41
6-41
6-41
HLD63B500
HLD63B600
HLD63F600
HLG2B400L
HLG2B500L
HLG2B600L
HLG2F600
HLG3B400L
HLG3B500L
HLG3B600L
MCCB
MCCB
MCCB
6-45
6-45
6-45
6-109
6-109
6-109
MCCB 6-109
6-109
6-109
6-109
HMG3P600L
HMG3P800L
HMG3U600L
HMG3U800L
HMG3X600L
HMG3X800L
HMG4F800
HMG4N600L
HMG4N800L
HMG4P600L
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
HNF361SW
HNF361X
HNF362
HNF362H
HNF362J
HNF362JCH
HNF362JCHW
HNF362JH
HNF362JPN
HNF362JW
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-13
3-16
3-12
3-12
3-12
3-15
3-15
3-12
3-15
3-13
HHD61234
HHD61234S
HHD65678
HHED62B015
HHED62B020
HHED62B025
HHED62B030
HHED62B035
HHED62B040
HHED62B045
HDSS
HDSS
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
3-30
3-30
3-30
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HJD63B250
HJD63B300
HJD63B350
HJD63B400
HJD63F400
HJG2B250L
HJG2B300L
HJG2B350L
HJG2B400L
HJG2F400
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-41
6-41
6-41
6-41
6-105
6-105
6-105
6-105
MCCB 6-105
HLG3D400L
HLG3D600L
HLG3E400L
HLG3E600L
HLG3F600
HLG3F600
HLG3F600
HLG3N400L
HLG3N600L
HLG3P400L
6-110
6-110
6-110
6-110
MCCB 6-109
MCCB 6-110
MCCB 6-110
6-110
6-110
6-110
HMG4P800L
HMG4U600L
HMG4U800L
HMG4X600L
HMG4X800L
HMM3M800
HMS2S800
HMS3S800
HMXD63B500
HMXD63B600
MCCB
MCCB
MCCB
MCCB
MCCB
6-114
6-114
6-114
6-114
6-114
6-124
6-123
6-123
6-52
6-52
HNF362R
HNF362RH
HNF362RL
HNF362S
HNF362SCH
HNF362SCHW
HNF362SH
HNF362SPN
HNF362SW
HNF362X
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-12
3-12
3-12
3-12
3-15
3-15
3-12
3-15
3-13
3-16
HHED62B050
HHED62B060
HHED62B070
HHED62B080
HHED62B090
HHED62B100
HHED62B110
HHED62B125
HHED63B015
HHED63B020
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HJG3B250L
HJG3B300L
HJG3B350L
HJG3B400L
HJG3D250L
HJG3D400L
HJG3E250L
HJG3E400L
HJG3F400
HJG3F400
6-105
6-105
6-105
6-105
6-106
6-106
6-106
6-106
MCCB 6-105
MCCB 6-106
HLG3P600L
HLG3U400L
HLG3U600L
HLG3X400L
HLG3X600L
HLM3L600
HLM3M600
HLMD62B500
HLMD62B600
HLMD62B700
MCCB
MCCB
MCCB
MCCB
MCCB
6-110
6-110
6-110
6-110
6-110
6-124
6-124
6-49
6-49
6-49
HMXD63B700
HMXD63B800
HN263
HN263
HN263
HN264
HN612
HN612
HN623
HN623
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
6-52
6-52
3-17
3-30
4-8
3-17
3-17
4-8
3-17
4-8
HNF363
HNF363J
HNF363JCH
HNF363JCHW
HNF363JW
HNF363R
HNF363S
HNF363SCH
HNF363SCHW
HNF363SW
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-12
3-12
3-15
3-15
3-13
3-12
3-12
3-15
3-15
3-13
HHED63B025
HHED63B030
HHED63B035
HHED63B040
HHED63B045
HHED63B050
HHED63B060
HHED63B070
HHED63B080
HHED63B090
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
6-35
HJG3F400
HJG3N250L
HJG3N400L
HJG3P250L
HJG3P400L
HJG3U250L
HJG3U400L
HJG3X250L
HJG3X400L
HJG4B250L
MCCB 6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-106
6-105
HLMD62B800
HLMD62F800
HLMD63B500
HLMD63B600
HLMD63B700
HLMD63B800
HLMD63F800
HLMXD63B500
HLMXD63B600
HLMXD63B700
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-49
6-49
6-49
6-49
6-49
6-49
6-49
6-49
6-49
6-49
HN64
HN656
HN656
HN678
HN678
HN678
HNB
HNB
HNB612
HNB612
HDSS 3-17
HDSS 3-17
HDSS 3-17
HDSS 3-17
HDSS 3-17
HDSS 3-30
NEMA 16-87
NEMA 16-93
HDSS 3-34
HDSS 3-34
HNF363X
HNF364
HNF364J
HNF364JW
HNF364R
HNF364S
HNF364SW
HNF364X
HNF365
HNF365J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-16
3-12
3-12
3-13
3-12
3-12
3-13
3-16
3-12
3-12
HHED63B100
HHED63B110
HHED63B125
HHFD63B070
HHFD63B080
HHFD63B090
HHFD63B100
HHFD63B110
HHFD63B125
HHFD63B150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-35
6-35
6-35
6-38
6-38
6-38
6-38
6-38
6-38
6-38
HJG4B300L
HJG4B350L
HJG4B400L
HJG4F400
HJM3L400
HJM3M400
HJS2S400
HJS3S400
HJXD63S400A
HL612
6-105
6-105
6-105
6-105
6-124
6-124
6-123
6-123
6-72
3-34
HLMXD63B800
HLS2S600
HLS3S600
HLXD63S600A
HM6123
HM6123
HM6123
HM6123
HM6123
HM6123
MCCB 6-49
MCCB 6-123
MCCB 6-123
MCCB 6-72
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HDSS 3-34
HNB623
HNB623
HNB64
HNB65
HNB66
HNB678
HNB67A
HNC264
HNC612
HND63B100
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HNF365JW
HNF365R
HNF365S
HNF365SW
HNF366
HNF366J
HNF366R
HNF366S
HNF367
HNF367J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-13
3-12
3-12
3-13
3-12
3-12
3-12
3-12
3-12
3-12
19-8
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
MCCB
3-34
3-34
3-34
3-34
3-34
3-34
3-34
3-30
3-30
6-56
Product Index
Catalog
Number
Product
Category
HNF367R
HNF367S
HNF368
HNF368J
HNF368R
HNF368S
HNF461
HNF461J
HNF462
HNF462J
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-12
3-12
3-12
3-12
3-12
3-12
3-14
3-14
3-14
3-14
HPG3F160
HPG3N120
HPG3N160
HPG3P120
HPG3P160
HPG3U120
HPG3U160
HPG3X120
HPG3X160
HPG4F160
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
HNF463
HNF463J
HNF464
HNF464J
HNF661J
HNF661S
HNF662J
HNF662S
HNF663J
HNF663S
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-14
3-14
3-14
3-14
3-14
3-14
3-14
3-14
3-14
3-14
HPG4N120
HPG4N160
HPG4P120
HPG4P160
HPG4U120
HPG4U160
HPG4X120
HPG4X160
HPLE
HPLEB
HNF664J
HNF664S
HNG2B100L
HNG2B120L
HNG2B800L
HNG2B900L
HNG2F120
HNG3B100L
HNG3B120L
HNG3B800L
HDSS
HDSS
3-14
3-14
6-117
6-117
6-117
6-117
6-117
6-117
6-117
6-117
HNG3B900L
HNG3D100L
HNG3D120L
HNG3D800L
HNG3E100L
HNG3E120L
HNG3E800L
HNG3F120
HNG3F120
HNG3F120
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
1-16
1-16
6-87
1-16
6-87
1-16
1-16
1-16
1-16
1-16
JD63B250
JD63B300
JD63B350
JD63B400
JD63F400
JD63T200
JD63T200
JD63T200
JD63T225
JD63T225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-40
6-40
6-40
6-40
6-40
6-40
6-41
6-41
6-40
6-41
LBRA25D
LBRD1
LBRH10
LBRH2
LBRH3
LBRH4
LBRH5
LBRH6
LBRH7
LBRH8
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
MCCB 6-86
MCCB 6-86
I1224L1125CU
I1224L1200CU
I1224L3125CU
I1224L3200CU
I1624L1125CU
I1632L1200CU
I1836L3200CU
I2040L1200CU
I2442L3200CU
I3040L1125CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-16
1-16
1-16
1-16
1-16
1-16
1-16
1-16
1-16
1-16
JD63T225
JD63T250
JD63T250
JD63T250
JD63T250
JD63T250
JD63T250
JD63T300
JD63T300
JD63T300
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-40
6-41
6-41
6-44
6-45
6-45
6-40
6-41
6-41
LBRH9
LBRP25
LBRP25D
LBRS040
LBRS050
LBRS055
LBRS080
LBRS120
LBRS180
LBRS305
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
HPLF
HPLF
HPLG
HPLL
HPLL
HPLM
HPLP
HPLP
HPS3S160
HPXD63B120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-136
6-136
6-86
6-137
6-137
6-137
6-137
6-137
6-123
6-59
I3040L1200CU
I3042L3200CU
I4040L1200CU
I4242L1225CU
I4242L3225CU
ICGK
IGK
IMK1
IPBF
IPBF
RESI
RESI
RESI
RESI
RESI
UNPB
UNPB
UNPB
MCCB
MCCB
1-16
1-16
1-16
1-16
1-16
10-11
10-11
10-11
6-132
6-132
JD63T300
JD63T300
JD63T300
JD63T350
JD63T350
JD63T350
JD63T350
JD63T350
JD63T350
JD63T400
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-44
6-45
6-45
6-40
6-41
6-41
6-44
6-45
6-45
6-40
LBT3040
LBT3060
LBT3080
LBT3100
LBT4040
LBTCP1
LBTCP2
LBTCP3
LD1E100
LD62B250
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
MCCB
MCCB
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
6-82
6-44
6-117
6-118
6-118
6-118
6-118
6-118
6-118
6-117
6-118
6-118
HPXD63B140
HPXD63B160
HQ2100BH
HQ2125BH
HQ2150BH
HQ2175BH
HQ2200BH
HQ2225BH
HQJ23B100H
HQJ23B110H
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
RESI
MCCB
MCCB
6-59
6-59
1-29
1-29
1-29
1-29
1-29
1-29
6-28
6-28
IPBM
IPBM
IPBM
IPBP
IPBP
IR0816L1200TR
IR1224L1125
IR1632L1125
IR2040L1125CU
IR2040L1200CU
MCCB
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
6-133
6-133
6-133
6-133
6-133
1-16
1-16
1-16
1-16
1-16
JD63T400
JD63T400
JD63T400
JD63T400
JD63T400
JD6HBL
JD6HPL
JG03579
JG04012
JG0401S
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-41
6-44
6-45
6-45
6-86
6-86
6-104
6-104
6-104
LD62B300
LD62B350
LD62B400
LD62B450
LD62B500
LD62B600
LD62F600
LD62T450
LD62T450
LD62T500
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-44
6-44
6-44
6-44
6-44
6-44
6-44
6-44
6-45
6-44
HNG3N100L
HNG3N120L
HNG3N800L
HNG3P100L
HNG3P120L
HNG3P800L
HNG3U100L
HNG3U120L
HNG3U800L
HNG3X100L
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
HQJ23B125H
HQJ23B150H
HQJ23B175H
HQJ23B200H
HQJ23B225H
HQN2150
HQN2150R
HQN2175
HQN2175R
HQN2200
MCCB
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
6-28
6-28
6-28
6-28
6-28
1-29
1-29
1-29
1-29
1-29
IR2440L1200
IR3040L1125
IR3040L1200CU
IR4040L1200CU
IR4242L1225CU
J6N1
J6N1
J6N12
J6N12
J6N3R
RESI
RESI
RESI
RESI
RESI
MCCB
1-16
1-16
1-16
1-16
1-16
5-8
6-41
5-13
6-41
5-10
JG0401SC
JG0403R
JG0403RC
JXD22B200
JXD22B225
JXD22B250
JXD22B300
JXD22B350
JXD22B400
JXD22S400A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-104
6-104
6-104
6-40
6-40
6-40
6-40
6-40
6-40
6-72
LD62T500
LD62T600
LD62T600
LD63B250
LD63B300
LD63B350
LD63B400
LD63B450
LD63B500
LD63B600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-44
6-45
6-44
6-44
6-44
6-44
6-44
6-44
6-44
HNG3X120L
HNG3X800L
HNG4F120
HNG4N100L
HNG4N120L
HNG4N800L
HNG4P100L
HNG4P120L
HNG4P800L
HNG4U100L
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
HQN2200R
“HR2, HR6”
“HR2, HR6”
HR21
HR21
HR21
HR612
HR612
HR612
HR62
RESI 1-29
NEMA 16-87
NEMA 16-93
HDSS 3-17
HDSS 3-30
HDSS
4-8
HDSS 3-17
HDSS 3-30
HDSS
4-8
HDSS 3-17
J6N3R
JD62B200
JD62B225
JD62B250
JD62B300
JD62B350
JD62B400
JD62F400
JD62T200
JD62T200
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-40
6-40
6-40
6-40
6-40
6-40
6-40
6-40
6-41
JXD23B200
JXD23B225
JXD23B250
JXD23B300
JXD23B350
JXD23B400
JXD23S400A
JXD62B200
JXD62B225
JXD62B250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-40
6-40
6-40
6-40
6-40
6-40
6-72
6-40
6-40
6-40
LD63F600
LD63T450
LD63T450
LD63T500
LD63T500
LD63T500
LD63T600
LD6N1
LD6N1
LD6N12
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-44
6-44
6-45
6-44
6-45
6-45
6-44
5-8
6-45
5-13
HNG4U120L
HNG4U800L
HNG4X100L
HNG4X120L
HNG4X800L
HNM3M120
HNS2S120
HNS3S120
HNXD63B100
HNXD63B120
HR62
HR62
HR63
HR63
HR63
HR64
HR64
HR64
HR656
HR656
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
3-30
4-8
3-17
3-30
4-8
3-17
3-30
4-8
3-17
4-8
JD62T200
JD62T225
JD62T225
JD62T225
JD62T250
JD62T250
JD62T250
JD62T250
JD62T250
JD62T250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-41
6-40
6-41
6-41
6-40
6-41
6-41
6-44
6-45
6-45
JXD62B300
JXD62B350
JXD62B400
JXD62H400
JXD63B200
JXD63B225
JXD63B250
JXD63B300
JXD63B350
JXD63B400
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-40
6-40
6-40
6-66
6-40
6-40
6-40
6-40
6-40
6-40
LD6N12
LD6N3R
LD6N3R
LD6SS4
LD6SS4
LD6SS4
LDG2B050L
LDG2B060L
LDG2B070L
LDG2B080L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-118
6-118
6-118
6-118
6-118
6-124
6-123
6-123
6-56
6-56
HNXD63B900
HP61
HP61
HP62
HP62
HP63
HP63
HPD63B120
HPD63B140
HPD63B160
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
MCCB
MCCB
MCCB
6-56
3-18
4-9
3-18
4-9
3-18
4-9
6-59
6-59
6-59
HRD63B160
HRD63B180
HRD63B200
HRD63F200
HRXD63B160
HRXD63B180
HRXD63B200
HSBE
HT23
HT23
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
6-62
6-62
6-62
6-62
6-62
6-62
6-62
6-87
3-17
3-30
JD62T300
JD62T300
JD62T300
JD62T300
JD62T300
JD62T300
JD62T350
JD62T350
JD62T350
JD62T350
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-40
6-41
6-41
6-44
6-45
6-45
6-40
6-41
6-41
6-44
JXD63H400
JXD63L400
JXD63S400A
K
KCC
KCC
KT
KTT
LBR3025
LBR3025D
MCCB
MCCB
MCCB
NEMA
NEMA
NEMA
NEMA
NEMA
HDSS
HDSS
6-66
6-66
6-72
16-84
16-151
16-152
16-78
16-89
4-4
4-4
LDG2B090L
LDG2B100L
LDG2B110L
LDG2B125L
LDG2B150L
LDG2F150
LDG3B050L
LDG3B060L
LDG3B070L
LDG3B080L
HPD63F160
HPG3B120
HPG3B140
HPG3B160
HPG3D120
HPG3D160
HPG3E120
HPG3E160
HPG3F160
HPG3F160
MCCB
6-59
6-120
6-120
6-120
6-121
6-121
6-121
6-121
6-120
6-121
HT23
HT24
HT24
HT24
HT63
HT63
HT63
HT64
HT64
HT64
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-8
3-17
3-30
4-8
3-17
3-30
4-8
3-17
3-30
4-8
JD62T350
JD62T350
JD62T400
JD62T400
JD62T400
JD62T400
JD62T400
JD62T400
JD63B200
JD63B225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-45
6-45
6-40
6-41
6-41
6-44
6-45
6-45
6-40
6-40
LBR3040
LBR3060
LBR3080
LBR3100
LBR4040
LBRA1
LBRA1
LBRA2
LBRA2
LBRA25
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-4
4-4
4-4
4-4
4-4
3-33
4-4
3-33
4-4
4-4
LDG3B090L
LDG3B100L
LDG3B110L
LDG3B125L
LDG3B150L
LDG3D060L
LDG3D100L
LDG3D150L
LDG3E060L
LDG3E100L
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MCCB
MCCB
6-45
5-10
6-45
5-12
6-41
6-45
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-98
6-98
6-98
6-98
6-98
19-9
PRODUCT
INDEX
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
19
I0202L1200
I0204ML1125
I0204ML1125
I0303ML3100
I0303ML3100
I0408ML1125
I0816L1200CT
I0816ML1125CU
I0816ML1125CUSP
I1220L1200CT
Product Index
Catalog
Number
PRODUCT
INDEX
19
LDG3E150L
LDG3F150
LDG3F150
LDG3F150
LDG3N060L
LDG3N100L
LDG3N150L
LDG3P060L
LDG3P100L
LDG3P150L
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-98
6-97
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
LFG4B200L
LFG4B225L
LFG4B250L
LFG4F250
LFS3S250L
LG06012
LG0601S
LG0603R
LG0604S
LG06079
6-101
6-101
6-101
6-101
6-123
6-108
6-108
6-108
6-108
6-108
LMD63B600
LMD63B700
LMD63B800
LMD63F800
LMD63T500
LMD63T500
LMD63T600
LMD63T600
LMD63T700
LMD63T700
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-48
6-48
6-48
6-48
6-48
6-49
6-48
6-49
6-48
6-49
LNG4P100L
LNG4P120L
LNG4P800L
LNG4U100L
LNG4U120L
LNG4U800L
LNG4X100L
LNG4X120L
LNG4X800L
LNS3S120
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-123
MBK225
MBK225A
MBK225A
MBK225A
MBKBC3
MBKBL1
MBKBL3
MBKED1
MBKED3
MBKED3100
RESI
RESI
RESI
RESI
UNPB
UNPB
UNPB
UNPB
UNPB
MCCB
1-29
1-29
1-35
1-8
10-11
10-11
10-11
10-11
10-11
10-13
LDG3U060L
LDG3U100L
LDG3U150L
LDG3X060L
LDG3X100L
LDG3X150L
LDG4B050L
LDG4B060L
LDG4B070L
LDG4B080L
6-98
6-98
6-98
6-98
6-98
6-98
6-97
6-97
6-97
6-97
LJG2B250L
LJG2B300L
LJG2B350L
LJG2B400L
LJG2F400
LJG3B250L
LJG3B300L
LJG3B350L
LJG3B400L
LJG3D250L
6-105
6-105
6-105
6-105
MCCB 6-105
6-105
6-105
6-105
6-105
6-106
LMD63T800
LMD63T800
LMG2B600L
LMG2B700L
LMG2B800L
LMG2F800
LMG3B600L
LMG3B700L
LMG3B800L
LMG3D600L
MCCB
MCCB
6-48
6-49
6-113
6-113
6-113
6-113
6-113
6-113
6-113
6-114
LPG3B120
LPG3B140
LPG3B160
LPG3D120
LPG3D160
LPG3E120
LPG3E160
LPG3F160
LPG3F160
LPG3F160
6-120
6-120
6-120
6-121
6-121
6-121
6-121
6-120
6-121
6-121
MBKED3125
MBKFD1
MBKFD3
MBKFD3150
MBKFD3175
MBKFD3200
MBKFD3225
MBKFD3250
MBKJD1
MBKJD1300
MCCB
UNPB
UNPB
MCCB
MCCB
MCCB
MCCB
MCCB
UNPB
MCCB
10-13
10-11
10-11
10-13
10-13
10-13
10-13
10-13
10-11
10-13
LDG4B090L
LDG4B100L
LDG4B110L
LDG4B125L
LDG4B150L
LDG4F150
LDP302
LDP304
LDP306
LDP308
6-97
6-97
6-97
6-97
6-97
6-97
14-50
14-50
14-50
14-50
LJG3D400L
LJG3E250L
LJG3E400L
LJG3F400
LJG3F400
LJG3F400
LJG3N250L
LJG3N400L
LJG3P250L
LJG3P400L
6-106
6-106
6-106
MCCB 6-105
MCCB 6-106
MCCB 6-106
6-106
6-106
6-106
6-106
LMG3D800L
LMG3E600L
LMG3E800L
LMG3F800
LMG3F800
LMG3F800
LMG3N600L
LMG3N800L
LMG3P600L
LMG3P800L
6-114
6-114
6-114
6-113
6-114
6-114
6-114
6-114
6-114
6-114
LPG3N120
LPG3N160
LPG3P120
LPG3P160
LPG3U120
LPG3U160
LPG3X120
LPG3X160
LPG4F160
LPG4N120
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
MBKJD1400
MBKJD3
MBKJD3300
MBKJD3400
MBKNB1
MBKNB100
MBKNB110
MBKNB125
MBKNB3
MBKQJ1
MCCB
UNPB
MCCB
MCCB
UNPB
LDP310
LDP313
LDP316
LDP4024
LDP4044
LDP4064
LDP4084
LDP4104
LDU-100
LE
14-50
14-50
14-50
14-50
14-50
14-50
14-50
14-50
6-79
NEMA 16-69
LJG3U250L
LJG3U400L
LJG3X250L
LJG3X400L
LJG4B250L
LJG4B300L
LJG4B350L
LJG4B400L
LJG4F400
LJS3S400
6-106
6-106
6-106
6-106
6-105
6-105
6-105
6-105
6-105
6-123
LMG3U600L
LMG3U800L
LMG3X600L
LMG3X800L
LMG4F800
LMG4N600L
LMG4N800L
LMG4P600L
LMG4P800L
LMG4U600L
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
LPG4N160
LPG4P120
LPG4P160
LPG4U120
LPG4U160
LPG4X120
LPG4X160
LPS3S160
LXD62B450
LXD62B500
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-123
MCCB 6-44
MCCB 6-44
MBKQJ1125
MBKQJ1125H
MBKQJ1150
MBKQJ1150H
MBKQJ1175
MBKQJ1175H
MBKQJ1200
MBKQJ1200H
MBKQJ1225
MBKQJ1225H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
10-13
10-13
10-13
10-13
10-13
10-13
10-13
10-13
10-13
10-13
LE
LE
LE
LF111N
LF111NR
LF211N
LF211NR
LFG2B100L
LFG2B110L
LFG2B125L
NEMA 16-70
NEMA 16-87
NEMA 16-93
GDSS
3-6
GDSS
3-6
GDSS
3-6
GDSS
3-6
6-101
6-101
6-101
LKB4
LKB6
LKB8
LKF4
LKF6
LLG2B400L
LLG2B500L
LLG2B600L
LLG2F600
LLG3B400L
SWBD
SWBD
SWBD
SWBD
SWBD
12-22
12-22
12-22
12-22
12-22
6-109
6-109
6-109
MCCB 6-109
6-109
LMG4U800L
LMG4X600L
LMG4X800L
LMS3S800
LMXD62B600
LMXD62B700
LMXD62B800
LMXD63A800
LMXD63B500
LMXD63B600
6-114
6-114
6-114
6-123
6-48
6-48
6-48
6-66
6-48
6-48
LXD62B600
LXD62L600
LXD63B450
LXD63B500
LXD63B600
LXD63H600
LXD63L600
LXD63S600A
LXX-14
LXX-20
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-44
6-66
6-44
6-44
6-44
6-66
6-66
6-72
10-69
10-69
MBKQJ3
MBKQJ3125
MBKQJ3125H
MBKQJ3150
MBKQJ3150H
MBKQJ3175
MBKQJ3175H
MBKQJ3200
MBKQJ3200H
MBKQJ3225
UNPB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
10-11
10-13
10-13
10-13
10-13
10-13
10-13
10-13
10-13
10-13
LFG2B150L
LFG2B175L
LFG2B200L
LFG2B225L
LFG2B250L
LFG2F250
LFG3B100L
LFG3B110L
LFG3B125L
LFG3B150L
6-101
6-101
6-101
6-101
6-101
MCCB 6-101
6-101
6-101
6-101
6-101
LLG3B500L
LLG3B600L
LLG3D400L
LLG3D600L
LLG3E400L
LLG3E600L
LLG3F600
LLG3F600
LLG3F600
LLG3N400L
6-109
6-109
6-110
6-110
6-110
6-110
MCCB 6-109
MCCB 6-110
MCCB 6-110
6-110
LMXD63B700
LMXD63B800
LMXD63L800
LMXD63S800A
LN1E100
LNF222R
LNG2B100L
LNG2B120L
LNG2B800L
LNG2B900L
6-48
6-48
6-66
6-72
6-82
3-6
6-117
6-117
6-117
6-117
LXX-26
LXX-32
LXX-38
LXX-41
LXX-44
LXX50-F
LXX-53
LXX-56
LXX-62
LXX-65
10-69
10-69
10-69
10-69
10-69
10-69
10-69
10-69
10-69
10-69
MBKQJ3225H
MBPG1600
MBPG1600
MBPG1601
MBPG1601
MBR9302
MBR9302
MBR9302
MBR9302
MBR9302
MCCB 10-13
6-120
6-133
6-120
6-133
MCCB 6-60
MCCB 6-62
MCCB 6-62
MCCB 6-62
MCCB 6-62
LFG3B175L
LFG3B200L
LFG3B225L
LFG3B250L
LFG3D100L
LFG3D150L
LFG3D250L
LFG3E100L
LFG3E150L
LFG3E250L
6-101
6-101
6-101
6-101
6-102
6-102
6-102
6-102
6-102
6-102
LLG3N600L
LLG3P400L
LLG3P600L
LLG3U400L
LLG3U600L
LLG3X400L
LLG3X600L
LLS3S600
LMAP1600
LMAP1600
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-123
6-120
6-133
LNG2F120
LNG3B100L
LNG3B120L
LNG3B800L
LNG3B900L
LNG3D100L
LNG3D120L
LNG3D800L
LNG3E100L
LNG3E120L
6-117
6-117
6-117
6-117
6-117
6-118
6-118
6-118
6-118
6-118
LXX-68
LXX-74
LXX-80
LXX-86
LXXP-T
MB120
MB9301
MB9301
MB9301
MB9301
MCCB
MCCB
MCCB
MCCB
MCCB
10-69
10-69
10-69
10-69
10-69
6-87
6-59
6-59
6-59
6-60
MC0408B1150RT
MC0408B1150T
MC0408B1200RT
MC0408B1200T
MC0408B1400RLTM
MC0606L1200R
MC0606L1200RA
MC0606L1200RJB
MC0816B1150CT
MC0816B1150RCT
RESI
RESI
RESI
RESI
RESI
2-20
2-20
2-20
2-20
2-21
2-20
2-20
2-20
2-20
2-20
LFG3F250
LFG3F250
LFG3F250
LFG3N100L
LFG3N150L
LFG3N250L
LFG3P100L
LFG3P150L
LFG3P250L
LFG3U100L
MCCB 6-101
MCCB 6-102
MCCB 6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
LMD1
LMD1
LMD12
LMD12
LMD3R
LMD3R
LMD62B500
LMD62B600
LMD62B700
LMD62B800
MCCB
MCCB
MCCB
5-8
6-49
5-13
6-49
5-10
6-49
6-48
6-48
6-48
6-48
LNG3E800L
LNG3F120
LNG3F120
LNG3F120
LNG3N100L
LNG3N120L
LNG3N800L
LNG3P100L
LNG3P120L
LNG3P800L
6-118
6-117
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
MB9301
MB9301
MB9301
MB9301
MBK100
MBK100A
MBK100A
MBK100A
MBK125
MBK125A
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
RESI
6-62
6-62
6-62
6-62
1-29
1-29
1-35
1-8
1-29
1-29
MC0816B1150RTH
MC0816B1150T
MC0816B1150TH
MC0816B1200CT
MC0816B1200FCTM
MC0816B1200RCT
MC0816B1200RT
MC0816B1200RTH
MC0816B1200SCTM
MC0816B1200T
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
2-21
2-21
2-21
2-20
2-22
2-20
2-21
2-21
2-22
2-21
LFG3U150L
LFG3U250L
LFG3X100L
LFG3X150L
LFG3X250L
LFG4B100L
LFG4B110L
LFG4B125L
LFG4B150L
LFG4B175L
6-102
6-102
6-102
6-102
6-102
6-101
6-101
6-101
6-101
6-101
LMD62F800
LMD62T500
LMD62T500
LMD62T600
LMD62T600
LMD62T700
LMD62T700
LMD62T800
LMD62T800
LMD63B500
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-48
6-48
6-49
6-48
6-49
6-48
6-49
6-48
6-49
6-48
LNG3U100L
LNG3U120L
LNG3U800L
LNG3X100L
LNG3X120L
LNG3X800L
LNG4F120
LNG4N100L
LNG4N120L
LNG4N800L
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
MBK125A
MBK125A
MBK150
MBK150A
MBK150A
MBK150A
MBK200
MBK200A
MBK200A
MBK200A
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-35
1-8
1-29
1-29
1-35
1-8
1-29
1-29
1-35
1-8
MC0816B1200TH
MC0816B1350RLTM
MC0816B1400RLTM
MC1020B1100EY
MC104BD
MC10BD
MC1212L1200FED
MC1212L1200FED
MC1224B1100CEY
MC1224B1100FEC
RESI
RESI
RESI
2-21
2-21
2-21
2-85
2-83
2-83
2-23
2-23
2-85
2-22
19-10
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
GDSS
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
10-13
10-11
10-13
10-13
10-11
10-13
10-13
10-13
UNPB 10-11
UNPB 10-11
RESI
RESI
RESI
RESI
RESG
RESI
RESI
RESI
Product Index
Catalog
Number
MC1224B1100SEC
MC1224B1125
MC1224B1125FEC
MC1224B1125SEC
MC1224MB1125R
MC124BD
MC12BD
MC1632B1100FEC
MC1632B1100SEC
MC1632B1125FEC
MC1830F3100CEY
MC20
MC20
MC2040B1150
MC2040B1150R
MC2040B1150RC
MC2040B1150RJBC
MC2040B1200
MC2040B1200FED
MC2040B1200R
Product
Category
RESI
RESI
RESI
RESI
RESI
RESG
RESI
RESI
RESI
RESG
RESG
RESI
RESI
RESI
RESI
RESI
RESI
MC2040B1200RC
MC2040B1200RJBC
MC2040B1200SED
MC2440B1200CEY
MC2442B1200FEC
MC2442B1200SEC
MC2442B1225FEC
MC2442B1225SEC
MC2442B1250FE2
MC2442F3200CEY
RESI
RESI
RESI
MC3040B1200SECW
MC3042B1200FED
MC3042B1200SED
MC3042B1225FED
MC3042B1225SED
MC3042B1250FE2
MC4040B1200SECW
MC44BD
MC4BD
MC64BD
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESG
RESI
RESI
RESI
RESI
RESI
Page
Catalog
Number
2-22
2-21
2-22
2-22
2-21
2-83
2-83
2-22
2-22
2-22
MD63T800
MD63T800
MD63T800
MFCF036
MFCF048
MFCF060
MFCF072
MFCF084
MFCF096
MFCF120
2-85
2-41
2-41
2-21
2-21
2-20
2-20
2-21
2-23
2-21
Product
Category Page
MCCB
MCCB
MCCB
Catalog
Number
Product
Category Page
6-52
6-55
6-56
6-128
6-128
6-128
6-128
6-128
6-128
6-128
MI5404
MI5405
MI5406
MI5413
MI5444
MLKA1
MLKA1
MLKA3
MLKA3
MLKC1
MCCB
MCCB
MCCB
MCCB
MCCB
UNPB
UNPB
UNPB
UNPB
UNPB
MFCF144
MFCM036
MFCM036
MFCM048
MFCM048
MFCM060
MFCM060
MFCM072
MFCM072
MFCM084
6-128
6-128
6-129
6-128
6-129
6-128
6-129
6-128
6-129
6-128
MLKC3
MM0202B1125RJB
MM0202B1125RJBX
MM0202B1150
MM0202B1150R
MM0202B1150RJB
MM0202B1150RJBX
MM0202B1200
MM0202B1200R
MM0202B1200RJB
UNPB 10-11
RESI 2-19
RESI 2-19
RESI 2-19
2-19
RESI 2-19
RESI 2-19
RESI 2-19
2-19
RESI 2-19
2-20
2-20
2-23
2-85
2-22
2-22
2-22
2-22
2-24
2-85
MFCM084
MFCM096
MFCM096
MFCM120
MFCM120
MFCM144
MFCM144
MFCP048
MFCP048
MFCP060
6-129
6-128
6-129
6-128
6-129
6-128
6-129
6-129
6-129
6-129
MM0202B1200RJBX
MM0202F1100CEY
MM0202F1100EY
MM0202F1200CEY
MM0202F1200EY
MM0202L1100EY
MM0202L1200CEY
MM0202L1200EY
MM0202ML1100S
MM0202ML1125H
MFCP060
MFCP072
MFCP072
MFCP084
MFCP084
MFCP096
MFCP096
MFCP120
MFCP120
MFCP144
6-129
6-129
6-129
6-129
6-129
6-129
6-129
6-129
6-129
6-129
MM0303F3100CEY
MM0303F3100EY
MM0303F3200CEY
MM0303F3200EY
MM0303L3100EY
MM0303L3200CEY
MM0303L3200EY
MM0404L1400RLM
MM0406B1200FEC
MM0406B1200SEC
RESI
6-87
6-87
6-87
6-87
6-87
10-11
10-12
10-11
10-12
10-11
Catalog
Number
MOMN6240
MRS
MS14TB
MS15TB
MS17TB
MS24TB
MS25TB
MS27TB
MS44UBD
MS44UTB
MS4UBD
MS64UBD
MS6UBD
MS84UBD
MS8UBD
MSE6
MSE6100
MSF6
MSF650
MSJ6
Product
Category Page
MCCB
NEMA
Catalog
Number
Product
Category Page
6-90
16-7
2-9
2-9
2-9
2-9
2-9
2-9
2-83
2-9
N2250
N250
N250
N250
N250
N250
N250
N250
N25STD
N32STD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
2-83
2-83
2-83
2-83
2-83
6-87
6-87
6-87
6-87
6-87
NBK3
NBK4
NBK5
NBK6
ND62B100
ND62B120
ND62B800
ND62B900
ND62F120
ND62T100
UNPB 10-11
UNPB 10-11
10-11
10-11
MCCB 6-55
MCCB 6-55
MCCB 6-55
MCCB 6-55
MCCB 6-55
MCCB 6-55
ND62T120
ND62T900
ND63B100
ND63B800
ND63B900
ND63B900
ND63F120
ND63T100
ND63T100
ND63T120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-55
6-55
6-55
6-55
6-55
6-55
6-55
6-55
6-56
6-55
MCCB
MCCB
MCCB
6-56
6-55
6-56
6-97
6-97
6-97
6-97
6-97
6-97
6-97
RESG
RESG
RESG
RESI
RESI
2-19
2-84
2-84
2-84
2-84
2-84
2-84
2-84
2-19
2-19
MSK2001
MSK2003
MSKE1
MSKE2
MSKE4
MSKF2
MSKF2
MSKF4
MSKF4
MSKG4
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
12-26
12-26
6-87
6-87
6-87
6-136
6-136
6-136
6-136
6-87
RESI
RESI
RESI
2-84
2-84
2-84
2-84
2-84
2-84
2-84
2-19
2-22
2-22
MSKL4
MSKL4
MSKM4
MSKP4
MSKP4
MSLMD
MSMN
MSPR6
MSQJ
MT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
NEMA
6-137
6-137
6-137
6-137
6-137
6-87
6-87
6-87
6-87
16-8
ND63T120
ND63T900
ND63T900
NDG2B050L
NDG2B060L
NDG2B070L
NDG2B080L
NDG2B090L
NDG2B100L
NDG2B110L
2-22
2-22
2-19
2-19
2-19
2-82
2-82
2-82
2-82
2-82
MTA
MTC08
MTC15
MTC25
MTC50
MTCSB08
MTCSB15
MTCSB25
MTCSB50
MTG
MCCB
MCCB
MCCB
MCCB
MCCB
6-80
6-80
6-80
6-80
6-80
6-80
6-80
6-80
6-80
NEMA 16-77
NDG2B125L
NDG2B150L
NDG2F150
NDG3B050L
NDG3B060L
NDG3B070L
NDG3B080L
NDG3B090L
NDG3B100L
NDG3B110L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
5-9
5-11
5-12
5-13
5-4
5-7
5-9
6-37
6-64
6-64
RESG
2-22
2-23
2-23
2-23
2-23
2-24
2-22
2-83
2-83
2-83
MC6BD
MC84BD
MC8BD
MCB12
MCS603R
MCS606R
MCS610R
MCS620R
MCSAK116
MCSAK116
RESG
RESG
RESI
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
2-83
2-83
2-83
1-35
4-11
4-11
4-11
4-11
4-12
4-12
MFCP144
MFHM3R
MFHM3R
MFHM3R
MFHM3RB
MFHM3RB
MFHM3RB
MFHM3RS
MFHM3RS
MFHM3RSB
6-129
6-128
6-128
6-129
6-128
6-128
6-129
6-128
6-128
6-128
MM0406L1125FEC
MM0406L1125SEC
MM0406L1200H
MM0406L1200RH
MM0406L1200RHJB
MMBMT1
MMBMT2
MMCVR1
MMCVR1R
MMCVR2
MCSAK126
MCSAK126
MCSAK216
MCSAK216
MCSAK226
MCSAK226
MCSAKL136
MCSAKL136
MCSAKL236
MCSAKL236
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
4-12
MFHM3RSB
MFHM3RSB
MFHM4X
MFHM4X
MFHM4X
MFHP3RS
MFHP3RS
MFHP3RS
MFHP3RSB
MFHP3RSB
6-128
6-129
6-128
6-128
6-129
6-129
6-129
6-129
6-129
6-129
MMCVR2R
MMPK11
MMPK13
MMPK21
MMPK23
MMS
MMSCK1
MMSCK2
MN6BL
MN6PLD
2-82
2-82
2-82
2-82
2-82
NEMA 16-150
2-82
2-82
MCCB 6-86
MCCB 6-86
MTRPB
MTRPM
MTRPN
MTRPR
MTRPY
MTZ
MXD62B500
MXD62B600
MXD62B700
MXD62B800
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-131
6-131
6-131
6-131
6-131
6-80
6-51
MCCB 6-51
MCCB 6-51
MCCB 6-51
NDG3B125L
NDG3B150L
NDG3D060L
NDG3D100L
NDG3D150L
NDG3E060L
NDG3E100L
NDG3E150L
NDG3F150
NDG3F150
MCSAKR136
MCSAKR136
MCSAKR236
MCSAKR236
MD62B500
MD62B600
MD62B700
MD62B800
MD62F800
MD62T500
HDSS
HDSS
HDSS
HDSS
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
4-12
4-12
4-12
6-51
6-51
6-51
6-51
6-51
6-51
MFHP4X
MFHP4X
MFKE3
MFKE4X3
MFKF3R
MFKL3R
MFKM3R
MFKP3RS
MFKP3RS
MFMF
6-129
6-129
6-89
6-89
6-128
6-128
6-129
6-129
6-129
6-128
MND61
MND61
MND61
MND61
MND612
MND612
MND612
MND612
MND63
MND63
MCCB
MCCB
MCCB
MCCB
5-8
6-51
6-53
6-55
5-13
6-51
6-53
6-55
5-10
6-51
MXD63A800
MXD63B500
MXD63B600
MXD63B700
MXD63B800
MXD63H800
MXD63L800
MXD63S800A
N02SJD
N03SJD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-66
6-51
6-51
6-51
6-51
6-66
6-66
6-72
6-42
6-42
NDG3F150
NDG3N060L
NDG3N100L
NDG3N150L
NDG3P060L
NDG3P100L
NDG3P150L
NDG3U060L
NDG3U100L
NDG3U150L
MD62T500
MD62T600
MD62T600
MD62T700
MD62T700
MD62T800
MD62T800
MD62T800
MD63B500
MD63B600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-52
6-51
6-52
6-51
6-52
6-51
6-52
6-55
6-51
6-51
MFML
MFMM
MFMP
MFMP
MFSFA1
MFSFA2
MFSLA1
MFSLA2
MFSPA1
MFSPA1
6-128
6-129
6-129
6-129
6-128
6-128
6-128
6-128
6-129
6-129
MND63
MND63
MOE6120
MOE6240
MOF6024DC
MOF6048DC
MOF6120
MOF6125DC
MOF6240
MOJ6024DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-55
6-90
6-90
6-90
6-90
6-90
6-90
6-90
6-90
N03SJD
N04SJD
N04SJD
N05SLD
N06SLD
N06SMDA
N07SMDA
N08SMDA
N08SMDA
N10SNDA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-46
6-42
6-46
6-46
6-46
6-53
6-53
6-53
6-57
6-57
NDG3X060L
NDG3X100L
NDG3X150L
NDG4B050L
NDG4B060L
NDG4B070L
NDG4B080L
NDG4B090L
NDG4B100L
NDG4B110L
6-98
6-98
6-98
6-97
6-97
6-97
6-97
6-97
6-97
6-97
MD63B700
MD63B800
MD63F800
MD63T500
MD63T500
MD63T600
MD63T600
MD63T600
MD63T700
MD63T800
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-51
6-51
6-51
6-51
6-52
6-51
6-51
6-52
6-52
6-51
MFSPA1
MFSPA2
MFSPA2
MFSPA2
MG0801S
MG0803R
MG1
MG1D
MG1D
MI5404
6-129
6-129
6-129
6-129
6-112
6-112
10-50
10-61
12-26
6-87
MOJ6048DC
MOJ6120
MOJ6125DC
MOJ6240
MOLMD6024DC
MOLMD6048DC
MOLMD6120
MOLMD6125DC
MOLMD6240
MOMN6120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-90
6-90
6-90
6-90
6-90
6-90
6-90
6-90
6-90
6-90
N12SNDA
N14SPD
N16SPD
N2000
N2000
N2000
N2000
N20STD
N2250
N2250
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-60
6-60
5-6
5-7
5-7
5-9
6-64
5-4
5-7
NDG4B125L
NDG4B150L
NDG4F150
NEB1B015B
NEB1B020B
NEB1B025B
NEB1B030B
NEB1B035B
NEB1B040B
NEB1B045B
6-97
6-97
6-97
6-24
6-24
6-24
6-24
6-24
6-24
6-24
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-97
6-97
6-98
6-98
6-98
6-98
6-98
6-98
6-97
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
6-98
19-11
PRODUCT
INDEX
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MCCB
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
6-97
19
PBSB
PBSB
PBSB
MCCB
RESI
RESI
RESI
RESI
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
NEB1B050B
NEB1B060B
NEB1B070B
NEB1B080B
NEB1B090B
NEB1B100B
NEB1B110B
NEB1B125B
NEB2B015B
NEB2B020B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
NEG4B050L
NEG4B060L
NEG4B070L
NEG4B080L
NEG4B090L
NEG4B100L
NEG4B110L
NEG4B125L
NF355HDTK
NF355SSDTK
NEB2B025B
NEB2B030B
NEB2B035B
NEB2B040B
NEB2B045B
NEB2B050B
NEB2B060B
NEB2B070B
NEB2B080B
NEB2B090B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
NF454DTK
NF454SSDTK
NF455DTK
NF456DTK
NF457DTK
NFG2B100L
NFG2B110L
NFG2B125L
NFG2B150L
NFG2B175L
HDSS
HDSS
HDSS
HDSS
HDSS
NEB2B100B
NEB2B110B
NEB2B125B
NEB3B015B
NEB3B020B
NEB3B025B
NEB3B030B
NEB3B035B
NEB3B040B
NEB3B045B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
NEB3B050B
NEB3B060B
NEB3B070B
NEB3B080B
NEB3B090B
NEB3B100B
NEB3B110B
NEB3B125B
NEG1B015L
NEG1B020L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
NEG1B025L
NEG1B030L
NEG1B035L
NEG1B040L
NEG1B045L
NEG1B050L
NEG1B060L
NEG1B070L
NEG1B080L
NEG1B090L
NEG1B100L
NEG1B110L
NEG1B125L
NEG2B015L
NEG2B020L
NEG2B025L
NEG2B030L
NEG2B035L
NEG2B040L
NEG2B045L
Catalog
Number
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
3-29
3-29
NGB2B020B
NGB2B025B
NGB2B030B
NGB2B035B
NGB2B040B
NGB2B045B
NGB2B050B
NGB2B060B
NGB2B070B
NGB2B080B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
NJG2B250L
NJG2B300L
NJG2B350L
NJG2B400L
NJG2F400
NJG3B250L
NJG3B300L
NJG3B350L
NJG3B400L
NJG3D250L
6-105
6-105
6-105
6-105
MCCB 6-105
6-105
6-105
6-105
6-105
6-106
NNG2B100L
NNG2B120L
NNG2B800L
NNG2B900L
NNG2F120
NNG3B100L
NNG3B120L
NNG3B800L
NNG3B900L
NNG3D100L
6-117
6-117
6-117
6-117
6-117
6-117
6-117
6-117
6-117
6-118
3-29
3-29
3-29
3-29
3-29
6-101
6-101
6-101
6-101
6-101
NGB2B090B
NGB2B100B
NGB2B110B
NGB2B125B
NGB3B015B
NGB3B020B
NGB3B025B
NGB3B030B
NGB3B035B
NGB3B040B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
NJG3D400L
NJG3E250L
NJG3E400L
NJG3F400
NJG3F400
NJG3F400
NJG3N250L
NJG3N400L
NJG3P250L
NJG3P400L
6-106
6-106
6-106
MCCB 6-105
MCCB 6-106
MCCB 6-106
6-106
6-106
6-106
6-106
NNG3D120L
NNG3D800L
NNG3E100L
NNG3E120L
NNG3E800L
NNG3F120
NNG3F120
NNG3F120
NNG3N100L
NNG3N120L
6-118
6-118
6-118
6-118
6-118
6-117
6-118
6-118
6-118
6-118
NFG2B200L
NFG2B225L
NFG2B250L
NFG2F250
NFG3B100L
NFG3B110L
NFG3B125L
NFG3B150L
NFG3B175L
NFG3B200L
6-101
6-101
6-101
MCCB 6-101
6-101
6-101
6-101
6-101
6-101
6-101
NGB3B045B
NGB3B050B
NGB3B060B
NGB3B070B
NGB3B080B
NGB3B090B
NGB3B100B
NGB3B110B
NGB3B125B
NGG1B015L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-30
NJG3U250L
NJG3U400L
NJG3X250L
NJG3X400L
NJG4B250L
NJG4B300L
NJG4B350L
NJG4B400L
NJG4F400
NJJ2B250L
6-106
6-106
6-106
6-106
6-105
6-105
6-105
6-105
6-105
6-105
NNG3N800L
NNG3P100L
NNG3P120L
NNG3P800L
NNG3U100L
NNG3U120L
NNG3U800L
NNG3X100L
NNG3X120L
NNG3X800L
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-32
6-32
NFG3B225L
NFG3B250L
NFG3D100L
NFG3D150L
NFG3D250L
NFG3E100L
NFG3E150L
NFG3E250L
NFG3F250
NFG3F250
6-101
6-101
6-102
6-102
6-102
6-102
6-102
6-102
MCCB 6-101
MCCB 6-102
NGG1B020L
NGG1B025L
NGG1B030L
NGG1B035L
NGG1B040L
NGG1B045L
NGG1B050L
NGG1B060L
NGG1B070L
NGG1B080L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
NJJ2B300L
NJJ2B350L
NJJ2B400L
NJJ3B250L
NJJ3B300L
NJJ3B350L
NJJ3B400L
NLG2B400L
NLG2B500L
NLG2B600L
6-105
6-105
6-105
6-105
6-105
6-105
6-105
6-109
6-109
6-109
NNG4F120
NNG4N100L
NNG4N120L
NNG4N800L
NNG4P100L
NNG4P120L
NNG4P800L
NNG4U100L
NNG4U120L
NNG4U800L
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
6-118
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
NFG3F250
NFG3N100L
NFG3N150L
NFG3N250L
NFG3P100L
NFG3P150L
NFG3P250L
NFG3U100L
NFG3U150L
NFG3U250L
MCCB 6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
6-102
NGG1B090L
NGG1B100L
NGG1B110L
NGG1B125L
NGG2B015L
NGG2B020L
NGG2B025L
NGG2B030L
NGG2B035L
NGG2B040L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
NLG2F600
NLG3B400L
NLG3B500L
NLG3B600L
NLG3D400L
NLG3D600L
NLG3E400L
NLG3E600L
NLG3F600
NLG3F600
MCCB 6-109
6-109
6-109
6-109
6-110
6-110
6-110
6-110
MCCB 6-109
MCCB 6-110
NNG4X100L
NNG4X120L
NNG4X800L
NPG3B120
NPG3B140
NPG3B160
NPG3D120
NPG3D160
NPG3E120
NPG3E160
6-118
6-118
6-118
6-120
6-120
6-120
6-121
6-121
6-121
6-121
MCCB
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
NFG3X100L
NFG3X150L
NFG3X250L
NFG4B100L
NFG4B110L
NFG4B125L
NFG4B150L
NFG4B175L
NFG4B200L
NFG4B225L
6-102
6-102
6-102
6-101
6-101
6-101
6-101
6-101
6-101
6-101
NGG2B045L
NGG2B050L
NGG2B060L
NGG2B070L
NGG2B080L
NGG2B090L
NGG2B100L
NGG2B110L
NGG2B125L
NGG3B015L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
NLG3F600
NLG3N400L
NLG3N600L
NLG3P400L
NLG3P600L
NLG3U400L
NLG3U600L
NLG3X400L
NLG3X600L
NMG2B600L
MCCB 6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-110
6-113
NPG3F160
NPG3F160
NPG3F160
NPG3N120
NPG3N160
NPG3P120
NPG3P160
NPG3U120
NPG3U160
NPG3X120
6-120
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
NFG4B250L
NFG4F250
NFR451DTK
NFR452DTK
NFR453DTK
NFR454DTK
NFR455DTK
NFR456DTK
NFR457DTK
NG12012
6-101
6-101
3-29
3-29
3-29
3-29
3-29
3-29
3-29
6-116
NGG3B020L
NGG3B025L
NGG3B030L
NGG3B035L
NGG3B040L
NGG3B045L
NGG3B050L
NGG3B060L
NGG3B070L
NGG3B080L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
6-30
NMG2B700L
NMG2B800L
NMG2F800
NMG3B600L
NMG3B700L
NMG3B800L
NMG3D600L
NMG3D800L
NMG3E600L
NMG3E800L
6-113
6-113
6-113
6-113
6-113
6-113
6-114
6-114
6-114
6-114
NPG3X160
NPG4F160
NPG4N120
NPG4N160
NPG4P120
NPG4P160
NPG4U120
NPG4U160
NPG4X120
NPG4X160
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
6-121
MCCB
MCCB
MCCB
MCCB
6-30
6-30
6-30
6-30
6-138
6-138
6-138
6-138
6-138
6-138
NMG3F800
NMG3F800
NMG3F800
NMG3N600L
NMG3N800L
NMG3P600L
NMG3P800L
NMG3U600L
NMG3U800L
NMG3X600L
6-113
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
NSK400
NSK400
NSK600
NSK600
NXD62B100
NXD62B120
NXD62B900
NXD63B100
NXD63B120
NXD63B900
RESG
RESG
RESG
RESG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
2-74
2-81
2-74
2-81
6-55
6-55
6-55
6-55
6-55
6-55
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
6-139
NMG3X800L
NMG4F800
NMG4N600L
NMG4N800L
NMG4P600L
NMG4P800L
NMG4U600L
NMG4U800L
NMG4X600L
NMG4X800L
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
6-114
NXD63S120A
OFCK620
OFCK620
OFCK620
OFCK620
OFCK661
OFCK661
OFCK661
OFCK661
OH9498
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
MCCB
6-72
4-11
4-11
4-11
4-11
4-11
4-11
4-11
4-11
6-88
HDSS
HDSS
NEG2B050L
NEG2B060L
NEG2B070L
NEG2B080L
NEG2B090L
NEG2B100L
NEG2B110L
NEG2B125L
NEG3B015L
NEG3B020L
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
NEG3B025L
NEG3B030L
NEG3B035L
NEG3B040L
NEG3B045L
NEG3B050L
NEG3B060L
NEG3B070L
NEG3B080L
NEG3B090L
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
NG1201S
NG1203R
NG1D
NG1D
NGB1B015B
NGB1B020B
NGB1B025B
NGB1B030B
NGB1B035B
NGB1B040B
6-116
6-116
PBSB 10-61
PBSB 12-26
MCCB 6-22
MCCB 6-22
MCCB 6-22
MCCB 6-22
MCCB 6-22
MCCB 6-22
NGG3B090L
NGG3B100L
NGG3B110L
NGG3B125L
NGSD060
NGSF100
NGSF100
NGSF150
NGSF150
NGSJ250
NEG3B100L
NEG3B110L
NEG3B125L
NEG4B015L
NEG4B020L
NEG4B025L
NEG4B030L
NEG4B035L
NEG4B040L
NEG4B045L
MCCB
MCCB
MCCB
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
NGB1B045B
NGB1B050B
NGB1B060B
NGB1B070B
NGB1B080B
NGB1B090B
NGB1B100B
NGB1B110B
NGB1B125B
NGB2B015B
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
NGSJ250
NGSL400
NGSL400
NGSM600
NGSM600
NGSN800
NGSN800
NGSP120
NGSP120
NGSP160
19-12
Product
Category Page
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
6-22
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product Index
Catalog
Number
P137RT2B
P137RTP
P137TP
P137U2B
P137UP
P137US
P177RBS
P17RBS
P17US
P1A18BL100ATS
Product
Category
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
10-18
10-18
10-18
10-18
10-18
10-18
10-18
UNPB 10-10
UNPB 10-10
UNPB 10-10
P2C42FX250ATS
P2C42JX400ATS
P2C42LX600ATS
P2C42ML125ATS
P2C42ML250ATS
P2C42ML400ATS
P2C42ML600ATS
P2C42NB125ATS
P2C42QJ225ATS
P2C54JX400ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3B56ML600ATS
P3B56ML800ATS
P3B62FD250ATS
P3B62JD400ATS
P3B62LD600ATS
P3B62ML250ATS
P3B62ML400ATS
P3B62ML600ATS
P3B62ML800ATS
P3B68FD250ATS
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
P3D74ML250ATS
P3D74ML400ATS
P3D74ML600ATS
P3D74ML800ATS
P3D80FD250ATS
P3D80JD400ATS
P3D80LD600ATS
P3D80ML250ATS
P3D80ML400ATS
P3D80ML600ATS
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-18
10-18
10-10
10-10
10-10
10-10
10-18
10-18
10-18
10-18
P1E42MC400C
P1E42ML125ATS
P1E42ML250ATS
P1E42ML400ATS
P1E42NB125ATS
P1F37UML
P1F77RBS
P1F7RTS
P1F7TS
P1F7US
UNPB 10-10
10-18
10-18
10-18
10-18
RESG 1-40
RESG 1-40
RESG 1-40
RESG 1-40
RESG 1-40
P2C54LX600ATS
P2C54ML400ATS
P2C54ML600ATS
P2E18BQ100ATS
P2E18FX225ATS
P2E18FX250ATS
P2E18JX400ATS
P2E18LX600ATS
P2E18ML125ATS
P2E18ML250ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3B68JD400ATS
P3B68LD600ATS
P3B68ML250ATS
P3B68ML400ATS
P3B68ML600ATS
P3B68ML800ATS
P3B74FD250ATS
P3B74JD400ATS
P3B74LD600ATS
P3B74ML250ATS
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
P3D80ML800ATS
P3E56FD250ATS
P3E56JD400ATS
P3E56LD600ATS
P3E56ML250ATS
P3E56ML400ATS
P3E56ML600ATS
P3E56ML800ATS
P3E62FD250ATS
P3E62JD400ATS
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-18
10-18
10-18
10-18
10-10
10-10
10-10
10-10
10-18
10-18
P1X18MC250A
P1X18MC250C
P1X18MC400A
P1X18MC400C
P1X30MC250A
P1X30MC250C
P1X30MC400A
P1X30MC400C
P1X42MC250A
P1X42MC250C
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
P2E18ML400ATS
P2E18ML600ATS
P2E18NB125ATS
P2E30BQ100ATS
P2E30FX225ATS
P2E30FX250ATS
P2E30JX400ATS
P2E30LX600ATS
P2E30ML125ATS
P2E30ML250ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3B74ML400ATS
P3B74ML600ATS
P3B74ML800ATS
P3B80FD250ATS
P3B80JD400ATS
P3B80LD600ATS
P3B80ML250ATS
P3B80ML400ATS
P3B80ML600ATS
P3B80ML800ATS
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
P3E62LD600ATS
P3E62ML250ATS
P3E62ML400ATS
P3E62ML600ATS
P3E62ML800ATS
P3E68FD250ATS
P3E68JD400ATS
P3E68LD600ATS
P3E68ML250ATS
P3E68ML400ATS
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-18
10-18
10-18
10-18
10-18
10-18
10-10
10-10
10-10
10-10
P1X42MC400A
P1X42MC400C
P2A18BL100ATS
P2A18FX250ATS
P2A18JX400ATS
P2A18LX600ATS
P2A18ML125ATS
P2A18ML250ATS
P2A18ML400ATS
P2A18ML600ATS
UNPB 10-10
UNPB 10-10
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P2E30ML400ATS
P2E30ML600ATS
P2E30NB125ATS
P2E42BQ100ATS
P2E42FX225ATS
P2E42FX250ATS
P2E42JX400ATS
P2E42LX600ATS
P2E42ML125ATS
P2E42ML250ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3BK1
P3C56FD250ATS
P3C56JD400ATS
P3C56LD600ATS
P3C56ML250ATS
P3C56ML400ATS
P3C56ML600ATS
P3C56ML800ATS
P3C62FD250ATS
P3C62JD400ATS
PBSB 10-42
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
P3E68ML600ATS
P3E68ML800ATS
P3E74FD250ATS
P3E74JD400ATS
P3E74LD600ATS
P3E74ML250ATS
P3E74ML400ATS
P3E74ML600ATS
P3E74ML800ATS
P3E80FD250ATS
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
P1A42ML125ATS
P1A42ML250ATS
P1A42ML400ATS
P1A42NB125ATS
P1A42QJ225ATS
P1C18BL100ATS
P1C18FX250ATS
P1C18ML125ATS
P1C18ML250ATS
P1C18ML400ATS
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
P2A18NB125ATS
P2A18QJ225ATS
P2A30BL100ATS
P2A30FX250ATS
P2A30JX400ATS
P2A30LX600ATS
P2A30ML125ATS
P2A30ML250ATS
P2A30ML400ATS
P2A30ML600ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P2E42ML400ATS
P2E42ML600ATS
P2E42NB125ATS
P2E54JX400ATS
P2E54LX600ATS
P2E54ML400ATS
P2E54ML600ATS
P30EMS
P37UP
P37US
10-27
10-27
10-27
10-27
10-27
10-27
10-27
PILO 16-218
RESG 1-40
RESG 1-40
P3C62LD600ATS
P3C62ML250ATS
P3C62ML400ATS
P3C62ML600ATS
P3C62ML800ATS
P3C68FD250ATS
P3C68JD400ATS
P3C68LD600ATS
P3C68ML250ATS
P3C68ML400ATS
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
P3E80JD400ATS
P3E80LD600ATS
P3E80ML250ATS
P3E80ML400ATS
P3E80ML600ATS
P3E80ML800ATS
P3F56FD250ATS
P3F56JD400ATS
P3F56LD600ATS
P3F56ML250ATS
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
P1C18NB125ATS
P1C18QJ225ATS
P1C30BL100ATS
P1C30FX250ATS
P1C30JX400ATS
P1C30ML125ATS
P1C30ML250ATS
P1C30ML400ATS
P1C30NB125ATS
P1C30QJ225ATS
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
P2A30NB125ATS
P2A30QJ225ATS
P2A42BL100ATS
P2A42FX250ATS
P2A42JX400ATS
P2A42LX600ATS
P2A42ML125ATS
P2A42ML250ATS
P2A42ML400ATS
P2A42ML600ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3A56FD250ATS
P3A56JD400ATS
P3A56LD600ATS
P3A56ML250ATS
P3A56ML400ATS
P3A56ML600ATS
P3A56ML800ATS
P3A62FD250ATS
P3A62JD400ATS
P3A62LD600ATS
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
P3C68ML600ATS
P3C68ML800ATS
P3C74FD250ATS
P3C74JD400ATS
P3C74LD600ATS
P3C74ML250ATS
P3C74ML400ATS
P3C74ML600ATS
P3C74ML800ATS
P3C80FD250ATS
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
P3F56ML400ATS
P3F56ML600ATS
P3F56ML800ATS
P3F62FD250ATS
P3F62JD400ATS
P3F62LD600ATS
P3F62ML250ATS
P3F62ML400ATS
P3F62ML600ATS
P3F62ML800ATS
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
P1C42BL100ATS
P1C42FX250ATS
P1C42FX250ATS
P1C42JX400ATS
P1C42ML125ATS
P1C42ML250ATS
P1C42ML400ATS
P1C42NB125ATS
P1C42QJ225ATS
P1E18BD100ATS
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
10-18
P2A42NB125ATS
P2A42QJ225ATS
P2A54JX400ATS
P2A54LX600ATS
P2A54ML400ATS
P2A54ML600ATS
P2BK1
P2BK2
P2BK3
P2C18BL100ATS
10-27
10-27
10-27
10-27
10-27
10-27
PBSB 10-31
PBSB 10-31
PBSB 10-31
10-27
P3A62ML250ATS
P3A62ML400ATS
P3A62ML600ATS
P3A62ML800ATS
P3A68FD250ATS
P3A68JD400ATS
P3A68LD600ATS
P3A68ML250ATS
P3A68ML400ATS
P3A68ML600ATS
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
P3C80JD400ATS
P3C80LD600ATS
P3C80ML250ATS
P3C80ML400ATS
P3C80ML600ATS
P3C80ML800ATS
P3D56FD250ATS
P3D56JD400ATS
P3D56LD600ATS
P3D56ML250ATS
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
P3F68FD250ATS
P3F68JD400ATS
P3F68LD600ATS
P3F68ML250ATS
P3F68ML400ATS
P3F68ML600ATS
P3F68ML800ATS
P3F74FD250ATS
P3F74JD400ATS
P3F74LD600ATS
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
P1E18FX225ATS
P1E18FX250ATS
P1E18JX400ATS
P1E18MC250A
P1E18MC250C
P1E18MC400A
P1E18MC400C
P1E18ML125ATS
P1E18ML250ATS
P1E18ML400ATS
10-18
10-18
10-18
10-10
10-10
10-10
10-10
10-18
10-18
10-18
P2C18FX250ATS
P2C18JX400ATS
P2C18LX600ATS
P2C18ML125ATS
P2C18ML250ATS
P2C18ML400ATS
P2C18ML600ATS
P2C18NB125ATS
P2C18QJ225ATS
P2C30BL100ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3A68ML800ATS
P3A74FD250ATS
P3A74JD400ATS
P3A74LD600ATS
P3A74ML250ATS
P3A74ML400ATS
P3A74ML600ATS
P3A74ML800ATS
P3A80FD250ATS
P3A80JD400ATS
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
P3D56ML400ATS
P3D56ML600ATS
P3D56ML800ATS
P3D62FD250ATS
P3D62JD400ATS
P3D62LD600ATS
P3D62ML250ATS
P3D62ML400ATS
P3D62ML600ATS
P3D62ML800ATS
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-37
P3F74ML250ATS
P3F74ML400ATS
P3F74ML600ATS
P3F74ML800ATS
P3F80FD250ATS
P3F80JD400ATS
P3F80LD600ATS
P3F80ML250ATS
P3F80ML400ATS
P3F80ML600ATS
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
10-37
10-18
10-18
10-18
10-18
10-18
10-10
10-10
10-10
10-10
10-18
P2C30FX250ATS
P2C30JX400ATS
P2C30LX600ATS
P2C30ML125ATS
P2C30ML250ATS
P2C30ML400ATS
P2C30ML600ATS
P2C30NB125ATS
P2C30QJ225ATS
P2C42BL100ATS
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
10-27
P3A80LD600ATS
P3A80ML250ATS
P3A80ML400ATS
P3A80ML600ATS
P3A80ML800ATS
P3B56FD250ATS
P3B56JD400ATS
P3B56LD600ATS
P3B56ML250ATS
P3B56ML400ATS
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
10-37
10-37
P3D68FD250ATS
P3D68JD400ATS
P3D68LD600ATS
P3D68ML250ATS
P3D68ML400ATS
P3D68ML600ATS
P3D68ML800ATS
P3D74FD250ATS
P3D74JD400ATS
P3D74LD600ATS
10-38
10-38
10-38
10-37
10-37
10-37
10-37
10-38
10-38
10-38
P3F80ML800ATS
P4A60JX400ATS
P4A60LX600ATS
P4A60M1800ATS
P4A60ML101ATS
P4A60ML120ATS
P4A60ML400ATS
P4A60ML600ATS
P4A60ML800ATS
P4A60MS100ATS
10-37
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
P1A18QJ225ATS
P1A30BL100ATS
P1A30FX250ATS
P1A30JX400ATS
P1A30MC250A
P1A30MC250C
P1A30MC400A
P1A30MC400C
P1A30ML125ATS
P1A30ML250ATS
P1A30ML400ATS
P1A30NB125ATS
P1A30QJ225ATS
P1A42BL100ATS
P1A42FX250ATS
P1A42JX400ATS
P1A42MC250A
P1A42MC250C
P1A42MC400A
P1A42MC400C
P1E18NB125ATS
P1E30BD100ATS
P1E30FX225ATS
P1E30FX250ATS
P1E30JX400ATS
P1E30MC250A
P1E30MC250C
P1E30MC400A
P1E30MC400C
P1E30ML125ATS
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-13
PRODUCT
INDEX
P1E30ML250ATS
P1E30ML400ATS
P1E30NB125ATS
P1E42BD100ATS
P1E42FX225ATS
P1E42FX250ATS
P1E42JX400ATS
P1E42MC250A
P1E42MC250C
P1E42MC400A
19
1-40
1-40
1-40
1-40
1-40
1-40
1-40
1-40
1-40
10-18
P1A18FX250ATS
P1A18JX400ATS
P1A18MC250A
P1A18MC250C
P1A18MC400A
P1A18MC400C
P1A18ML125ATS
P1A18ML250ATS
P1A18ML400ATS
P1A18NB125ATS
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
Page
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
P4A60MS200ATS
P4A75JX400ATS
P4A75LX600ATS
P4A75M1800ATS
P4A75ML101ATS
P4A75ML120ATS
P4A75ML400ATS
P4A75ML600ATS
P4A75ML800ATS
P4A75MS100ATS
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
P4D75ML400ATS
P4D75ML600ATS
P4D75ML800ATS
P4D75MS100ATS
P4D75MS200ATS
P4D90JX400ATS
P4D90LX600ATS
P4D90M1800ATS
P4D90ML101ATS
P4D90ML120ATS
10-47
10-47
10-47
10-48
10-48
10-47
10-47
10-47
10-47
10-47
P5A90MS400ATS
P5A90MS600ATS
P5A90MS800ATS
P5A90N1120ATS
P5B60M1800ATS
P5B60ML101ATS
P5B60ML120ATS
P5B60ML800ATS
P5B60N1120ATS
P5B75M1800ATS
10-58
10-58
10-58
10-57
10-57
10-57
10-57
10-57
10-57
10-57
P5E90ML800ATS
P5E90MS120ATS
P5E90MS400ATS
P5E90MS600ATS
P5E90MS800ATS
P5E90N1120ATS
P5F60M1800ATS
P5F60ML101ATS
P5F60ML120ATS
P5F60ML800ATS
10-57
10-58
10-58
10-58
10-58
10-57
10-57
10-57
10-57
10-57
PCBLFC3
PCBLRC3
PCBMRC3
PCBNRC3
PCCJD
PCCJD
PCCLD
PCCLD
PCTF83
PCTF83
P4A75MS200ATS
P4A90JX400ATS
P4A90LX600ATS
P4A90M1800ATS
P4A90ML101ATS
P4A90ML120ATS
P4A90ML400ATS
P4A90ML600ATS
P4A90ML800ATS
P4B60JX400ATS
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P4D90ML400ATS
P4D90ML600ATS
P4D90ML800ATS
P4E60JX400ATS
P4E60LX600ATS
P4E60M1800ATS
P4E60ML101ATS
P4E60ML120ATS
P4E60ML400ATS
P4E60ML600ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P5B75ML101ATS
P5B75ML120ATS
P5B75ML800ATS
P5B75MS120ATS
P5B75MS400ATS
P5B75MS600ATS
P5B75MS800ATS
P5B75N1120ATS
P5B90M1800ATS
P5B90ML101ATS
10-57
10-57
10-57
10-58
10-58
10-58
10-58
10-57
10-57
10-57
P5F60N1120ATS
P5F75M1800ATS
P5F75ML101ATS
P5F75ML120ATS
P5F75ML800ATS
P5F75MS120ATS
P5F75MS400ATS
P5F75MS600ATS
P5F75MS800ATS
P5F75N1120ATS
10-57
10-57
10-57
10-57
10-57
10-58
10-58
10-58
10-58
10-57
PCTL83
PCTL83
PCTM83
PCTP83
PCTP83
PCXD3
PCXF3
PCXFT
PCXFT
PCXJ3
P4B60LX600ATS
P4B60M1800ATS
P4B60ML101ATS
P4B60ML120ATS
P4B60ML400ATS
P4B60ML600ATS
P4B60ML800ATS
P4B60MS100ATS
P4B60MS200ATS
P4B75JX400ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
10-48
10-47
P4E60ML800ATS
P4E60MS100ATS
P4E60MS200ATS
P4E75JX400ATS
P4E75LX600ATS
P4E75M1800ATS
P4E75ML101ATS
P4E75ML120ATS
P4E75ML400ATS
P4E75ML600ATS
10-47
10-48
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P5B90ML120ATS
P5B90ML800ATS
P5B90MS120ATS
P5B90MS400ATS
P5B90MS600ATS
P5B90MS800ATS
P5B90N1120ATS
P5C60M1800ATS
P5C60ML101ATS
P5C60ML120ATS
10-57
10-57
10-58
10-58
10-58
10-58
10-57
10-57
10-57
10-57
P5F77RBS
P5F7TS
P5F90M1800ATS
P5F90ML101ATS
P5F90ML120ATS
P5F90ML800ATS
P5F90MS120ATS
P5F90MS400ATS
P5F90MS600ATS
P5F90MS800ATS
1-40
1-40
10-57
10-57
10-57
10-57
10-58
10-58
10-58
10-58
PCXL3
PCXLT
PCXLT
PCXM3
PCXMT
PCXN3
PCXPT
PCXPT
PD63B120
PD63B140
6-131
6-131
6-131
6-131
6-131
6-131
6-131
6-131
MCCB 6-59
MCCB 6-59
P4B75LX600ATS
P4B75M1800ATS
P4B75ML101ATS
P4B75ML120ATS
P4B75ML400ATS
P4B75ML600ATS
P4B75ML800ATS
P4B75MS100ATS
P4B75MS200ATS
P4B90JX400ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
10-48
10-47
P4E75ML800ATS
P4E75MS100ATS
P4E75MS200ATS
P4E90JX400ATS
P4E90LX600ATS
P4E90M1800ATS
P4E90ML101ATS
P4E90ML120ATS
P4E90ML400ATS
P4E90ML600ATS
10-47
10-48
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P5C60ML800ATS
P5C60N1120ATS
P5C75M1800ATS
P5C75ML101ATS
P5C75ML120ATS
P5C75ML800ATS
P5C75MS120ATS
P5C75MS400ATS
P5C75MS600ATS
P5C75MS800ATS
10-57
10-57
10-57
10-57
10-57
10-57
10-58
10-58
10-58
10-58
P5F90N1120ATS
P77BS
P77RBS
P77RTS
P77TS
P77US
PAKMCVRL
PAKMCVRR
PB224
PB226
10-57
1-40
1-40
1-40
1-40
1-40
2-82
2-82
SWBD 12-20
SWBD 12-20
PD63B160
PD63F160
PD63T120
PD63T120
PD63T140
PD63T140
PD63T160
PD63T160
PE4630
PE4840
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-59
SWBD 12-22
SWBD 12-22
P4B90LX600ATS
P4B90M1800ATS
P4B90ML101ATS
P4B90ML120ATS
P4B90ML400ATS
P4B90ML600ATS
P4B90ML800ATS
P4C60JX400ATS
P4C60LX600ATS
P4C60M1800ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P4E90ML800ATS
P4F60JX400ATS
P4F60LX600ATS
P4F60M1800ATS
P4F60ML101ATS
P4F60ML120ATS
P4F60ML400ATS
P4F60ML600ATS
P4F60ML800ATS
P4F60MS100ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
P5C75N1120ATS
P5C90M1800ATS
P5C90ML101ATS
P5C90ML120ATS
P5C90ML800ATS
P5C90MS120ATS
P5C90MS400ATS
P5C90MS600ATS
P5C90MS800ATS
P5C90N1120ATS
10-57
10-57
10-57
10-57
10-57
10-58
10-58
10-58
10-58
10-57
PB228
PB424
PB426
PB428
PB444
PB446
PB448
PBP32
PC2637
PC2637
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
MCCB
MCCB
12-20
12-20
12-20
12-20
12-20
12-20
12-20
12-23
6-91
6-91
PEGB42
PF224
PF226
PF424
PF426
PF444
PF446
PF4606
PF4809
PLK400
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
RESG
12-23
12-21
12-21
12-21
12-21
12-21
12-21
12-22
12-22
2-74
P4C60ML101ATS
P4C60ML120ATS
P4C60ML400ATS
P4C60ML600ATS
P4C60ML800ATS
P4C60MS100ATS
P4C60MS200ATS
P4C75JX400ATS
P4C75LX600ATS
P4C75M1800ATS
10-47
10-47
10-47
10-47
10-47
10-48
10-48
10-47
10-47
10-47
P4F60MS200ATS
P4F75JX400ATS
P4F75LX600ATS
P4F75M1800ATS
P4F75ML101ATS
P4F75ML120ATS
P4F75ML400ATS
P4F75ML600ATS
P4F75ML800ATS
P4F75MS100ATS
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-48
P5D60M1800ATS
P5D60ML101ATS
P5D60ML120ATS
P5D60ML800ATS
P5D60N1120ATS
P5D75M1800ATS
P5D75ML101ATS
P5D75ML120ATS
P5D75ML800ATS
P5D75MS120ATS
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-58
PC2638
PC2638
PC2657
PC2657
PC2658
PC2658
PC4753
PC4753
PC4753
PC4753
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
PLK400
PLK600
PLK600
PLL44
PLL46
PLL48
PLW10
PMS13
PMS15
PMS5
RESG
RESG
RESG
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
2-81
2-74
2-81
12-23
12-23
12-23
12-23
12-23
12-23
12-23
P4C75ML101ATS
P4C75ML120ATS
P4C75ML400ATS
P4C75ML600ATS
P4C75ML800ATS
P4C75MS100ATS
P4C75MS200ATS
P4C90JX400ATS
P4C90LX600ATS
P4C90M1800ATS
10-47
10-47
10-47
10-47
10-47
10-48
10-48
10-47
10-47
10-47
P4F75MS200ATS
P4F90JX400ATS
P4F90LX600ATS
P4F90M1800ATS
P4F90ML101ATS
P4F90ML120ATS
P4F90ML400ATS
P4F90ML600ATS
P4F90ML800ATS
P577TS
10-48
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
RESG 1-40
P5D75MS400ATS
P5D75MS600ATS
P5D75MS800ATS
P5D75N1120ATS
P5D90M1800ATS
P5D90ML101ATS
P5D90ML120ATS
P5D90ML800ATS
P5D90MS120ATS
P5D90MS400ATS
10-58
10-58
10-58
10-57
10-57
10-57
10-57
10-57
10-58
10-58
PC4754
PC4754
PC4754
PC4754
PC5660
PC5660
PC5661
PC5661
PC5662
PC5662
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
PMS6
PMS8
PQ2630
PQ2840
PQ4630
PQ4840
PRD6N1
PRD6N1
PSDP32
PSFFJ6
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
12-23
12-23
12-22
12-22
12-22
12-22
5-8
6-60
SWBD 12-23
SWBD 12-22
P4C90ML101ATS
P4C90ML120ATS
P4C90ML400ATS
P4C90ML600ATS
P4C90ML800ATS
P4D60JX400ATS
P4D60LX600ATS
P4D60M1800ATS
P4D60ML101ATS
P4D60ML120ATS
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
10-47
P577US
P5A60M1800ATS
P5A60ML101ATS
P5A60ML120ATS
P5A60ML800ATS
P5A60N1120ATS
P5A75M1800ATS
P5A75ML101ATS
P5A75ML120ATS
P5A75ML800ATS
RESG
1-40
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-57
P5D90MS600ATS
P5D90MS800ATS
P5D90N1120ATS
P5E60M1800ATS
P5E60ML101ATS
P5E60ML120ATS
P5E60ML800ATS
P5E60N1120ATS
P5E75M1800ATS
P5E75ML101ATS
10-58
10-58
10-57
10-57
10-57
10-57
10-57
10-57
10-57
10-57
PC5663
PC5663
PC5664
PC5664
PC5666
PC5666
PC5777
PC5777
PC5778
PC5778
MCCB
MCCB
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
PSFJL6
PSP32
PTE
PUG14
PUG26
PXD63B120
PXD63B140
PXD63B160
PXD63S160A
Q110
SWBD 12-22
SWBD 12-23
12-24
SWBD 12-23
SWBD 12-23
MCCB 6-59
MCCB 6-59
MCCB 6-59
MCCB 6-72
RESI 1-24
P4D60ML400ATS
P4D60ML600ATS
P4D60ML800ATS
P4D60MS100ATS
P4D60MS200ATS
P4D75JX400ATS
P4D75LX600ATS
P4D75M1800ATS
P4D75ML101ATS
P4D75ML120ATS
10-47
10-47
10-47
10-48
10-48
10-47
10-47
10-47
10-47
10-47
P5A75MS120ATS
P5A75MS400ATS
P5A75MS600ATS
P5A75MS800ATS
P5A75N1120ATS
P5A90M1800ATS
P5A90ML101ATS
P5A90ML120ATS
P5A90ML800ATS
P5A90MS120ATS
10-58
10-58
10-58
10-58
10-57
10-57
10-57
10-57
10-57
10-58
P5E75ML120ATS
P5E75ML800ATS
P5E75MS120ATS
P5E75MS400ATS
P5E75MS600ATS
P5E75MS800ATS
P5E75N1120ATS
P5E90M1800ATS
P5E90ML101ATS
P5E90ML120ATS
10-57
10-57
10-58
10-58
10-58
10-58
10-57
10-57
10-57
10-57
PCAF390
PCAF390
PCBDFC3
PCBDRC3
PCBERC3
PCBERC4
PCBFFC3
PCBFRC3
PCBJFC3
PCBJRC3
19-14
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
RESG
RESG
RESG
RESG
RESG
RESG
RESG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-130
6-130
6-130
6-130
6-91
6-91
6-130
6-130
6-131
6-131
Q115
Q115AF
Q115AFH
Q115H
Q115HH
Q115HID
Q115T
Q120
Q120AF
Q120AFH
6-131
6-131
6-131
6-131
MCCB 6-91
MCCB 6-91
6-91
6-91
6-130
6-130
6-131
6-131
6-131
6-131
6-131
6-130
6-130
6-130
6-130
6-131
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-26
1-26
1-24
1-24
1-27
1-27
1-24
1-26
1-26
Product Index
Catalog
Number
Product
Category
Q120H
Q120HH
Q120HID
Q120T
Q125
Q125H
Q125HH
Q130
Q130H
Q130HH
RESI
RESI
RESI
Page
Catalog
Number
Product
Category Page
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-27
1-27
1-24
1-24
1-24
1-24
1-24
1-24
Q2225B
Q2225BH
Q2225BHH
Q225
Q225H
Q225HH
Q230
Q23020CT2
Q23030CT
Q23030CT2
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Q130HID
Q135
Q135H
Q135HH
Q140
Q140H
Q140HH
Q145
Q145H
Q145HH
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-27
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
Q150
Q150H
Q150HH
Q1515
Q1515NC
Q1520
Q1520NC
Q160
Q160H
Q160HH
RESI
RESI
Catalog
Number
Product
Category Page
Q23050CT2
Q230H
Q230HH
Q230HID
Q230R
Q230S
Q235
Q235H
Q235HH
Q240
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-25
1-24
1-24
1-27
1-24
1-27
1-24
1-24
1-24
1-24
QE130
QE130H
QE215
QE215H
QE220
QE220H
QE230
QE230H
QE240
QE240H
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-24
1-25
1-25
1-25
1-25
1-24
1-24
1-24
Q24020CT2
Q24030CT2
Q24040CT2
Q240H
Q240HH
Q240R
Q245
Q245H
Q245HH
Q250
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-25
1-25
1-25
1-24
1-24
1-24
1-24
1-24
1-24
1-24
Q170
Q170H
Q170HH
Q2020
Q2020NC
Q2030
Q210
Q2100
Q2100H
Q2100HH
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-24
1-25
1-25
1-25
1-24
1-24
1-24
1-24
Q250H
Q250HH
Q250NN
Q250R
Q260
Q260H
Q260HH
Q260NN
Q260R
Q260S
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Q2100R
Q2110
Q2110H
Q2110HH
Q2125
Q2125B
Q2125BH
Q2125BHH
Q2125H
Q2125HH
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-24
1-24
1-24
1-29
1-29
1-29
1-24
1-24
Q270
Q270H
Q270HH
Q270NN
Q270R
Q280
Q280H
Q280HH
Q290
Q290H
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Q215
Q2150B
Q2150BH
Q2150BHH
Q21515CT
Q21515CT2
Q21520CT
Q21525CT
Q21530CT
Q21535CT
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-29
1-29
1-29
1-25
1-25
1-25
1-25
1-25
1-25
Q290HH
Q290NN
Q3015
Q3020
Q3030
Q3030NC
Q310
Q3100
Q3100H
Q3100HH
Q21540CT
Q21545CT
Q21550CT
Q215AF
Q215AFH
Q215H
Q215HH
Q215HID
Q215R
Q2175B
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-25
1-25
1-25
1-26
1-26
1-24
1-24
1-27
1-24
1-29
Q315
Q315H
Q315HH
Q320
Q320H
Q320HH
Q325
Q325H
Q325HH
Q330
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Q2175BH
Q2175BHH
Q220
Q2200B
Q2200BH
Q2200BHH
Q22020CT
Q22020CT2
Q22025CT
Q22030CT
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-29
1-29
1-24
1-29
1-29
1-29
1-25
1-25
1-25
1-25
Q330H
Q330HH
Q335
Q335H
Q335HH
Q340
Q340H
Q340HH
Q345
Q345H
RESI
RESI
RESI
Q22035CT
Q22040CT
Q22045CT
Q22050CT
Q220AF
Q220AFH
Q220H
Q220HH
Q220HID
Q220R
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-25
1-25
1-25
1-25
1-26
1-26
1-24
1-24
1-27
1-24
Q345HH
Q350
Q350H
Q350HH
Q360
Q360H
Q360HH
Q370
Q370H
Q370HH
Product
Category Page
1-24
1-24
1-24
1-24
1-24
1-24
1-26
1-26
1-26
1-26
QJ23B110H
QJ23B125
QJ23B125H
QJ23B150
QJ23B150H
QJ23B175
QJ23B175H
QJ23B200
QJ23B200H
QJ23B225
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
RCW(1)50B
RCW(1)53B
RCW(1)56B
RCW(1)59B
RCW(1)62B
RCW(1)65B
RCW(1)68B
RCW(1)71B
RCW(1)74B
RCW(1)77B
RESI
RESI
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
QJ23B225H
QJ23S225A
QJH22B060
QJH22B070
QJH22B080
QJH22B090
QJH22B100
QJH22B110
QJH22B125
QJH22B150
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-28
6-72
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
RD63B160
RD63B180
RD63B200
RD63F200
RD63T160
RD63T160
RD63T180
RD63T180
RD63T200
RD63T200
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-62
6-62
6-62
6-62
6-62
6-62
6-62
6-62
6-62
6-62
QE250
QE250H
QE260
QE260H
QF115
QF115H
QF120
QF120H
QF125
QF130
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
QJH22B175
QJH22B200
QJH22B225
QJH23B060
QJH23B070
QJH23B080
QJH23B090
QJH23B100
QJH23B110
QJH23B125
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
REC3100G
REC4100G
RFC3250G
RFC4250G
RHFESD
RHFESDEM
RHFF
RHFFEM
RHFL
RHFLEM
BPLU
BPLU
BPLU
BPLU
MCCB
MCCB
14-57
14-57
14-57
14-57
6-88
6-88
6-126
6-126
6-126
6-126
1-24
1-24
1-27
1-24
1-24
1-24
1-24
1-27
1-24
1-27
QF130H
QF215
QF215H
QF220
QF220H
QF230
QF230H
QF240
QF240H
QF250
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
1-26
QJH23B150
QJH23B175
QJH23B200
QJH23B225
QJHS1
QJHS1
QL1
QLD3
QN2150
QN2150H
MCCB 6-28
MCCB 6-28
MCCB 6-28
MCCB 6-28
MCCB 12-23
MCCB 6-86
12-23
12-23
RESI 1-29
RESI 1-29
1-24
1-24
1-24
1-27
1-24
1-24
1-24
1-24
1-24
1-24
QF250H
QF260
QF260H
QF3
QF3
QF3
QF3
QF3
QF3
QF3
RESI
RESI
RESI
RESG
RESG
RESG
RESG
RESG
RESG
RESG
1-26
1-26
1-26
10-11
10-50
10-61
12-23
12-26
1-35
6-86
QN2150R
QN2150RH
QN2175
QN2175H
QN2175R
QN2175RH
QN2200
QN2200H
QN2200R
QN2200RH
RESI
RESI
RESI
1-24
1-27
1-25
1-25
1-25
1-25
1-24
1-24
1-24
1-24
QG215
QG220
QG230
QG315
QG320
QG330
QJ22B060
QJ22B060H
QJ22B070
QJ22B070H
RESI
RESI
RESI
RESI
RESI
MCCB
MCCB
MCCB
MCCB
1-27
1-27
1-27
1-27
1-27
1-27
6-28
6-28
6-28
6-28
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
QJ22B080
QJ22B080H
QJ22B090
QJ22B090H
QJ22B100
QJ22B100H
QJ22B110
QJ22B110H
QJ22B125
QJ22B125H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
QJ22B150
QJ22B150H
QJ22B175
QJ22B175H
QJ22B200
QJ22B200H
QJ22B225
QJ22B225H
QJ22S225A
QJ23B060
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
1-24
QJ23B060H
QJ23B070
QJ23B070H
QJ23B080
QJ23B080H
QJ23B090
QJ23B090H
QJ23B100
QJ23B100H
QJ23B110
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Catalog
Number
RESI
RESI
RESI
RESI
RESI
RESI
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
RHFM
RHFMEM
RHOCQVD
RHOEBO
RHOFBO
RHOH
RHOH
RHOH4
RHOH4
RHOH62
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-127
6-127
6-88
6-88
6-88
4-12
6-88
4-12
6-88
6-88
RESI
RESI
RESI
RESI
RESI
RESI
1-29
1-29
1-29
1-29
1-29
1-29
1-29
1-29
1-29
1-29
RHOJBO
RHOLMBO
RHONBO
RHONSD
RHONSSD
RHONSVD
RHONSXD
RHOS06
RHOS06
RHOS06
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-88
6-88
6-88
6-88
6-88
6-88
6-88
4-12
4-12
4-12
QPJ3125
QPJ3150
QPJ3200
QSA1515
QSA2020
QSA2020TVSS
QW215
QW220
QW230
R1224ML1125CU
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-29
1-29
1-29
1-32
1-32
1-32
1-27
1-27
1-27
1-14
RHOS20
RHOSSD
RHOSVD
RHOSVD
RHOSVD
RHOSVD
RHOSVD
RHOSXD
RHSFA1
RHSFA1F
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
4-12
6-88
4-12
4-12
4-12
4-12
6-88
6-88
6-126
6-126
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
R2040ML1125CU
RAG24
RC(1)23B
RC(1)26B
RC(1)29B
RC(1)32B
RC(1)35B
RC(1)38B
RC(1)41B
RC(1)44B
RESI
RESI
1-14
1-35
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
RHSFA2
RHSFA2F
RHSLA1
RHSLA1F
RHSLA2
RHSLA2F
RHSMA1
RHSMA1F
RHSMA2
RHSMA2F
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-72
6-28
RC(1)47B
RC(1)50B
RC(1)53B
RC(1)56B
RC(1)59B
RC(1)62B
RC(1)65B
RC(1)68B
RC(1)71B
RC(1)74B
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
RHSPA1
RHSPA1F
RHSPA2
RHSPA2F
RHVE64X
RHVF12
RHVFBM
RHVL12
RHVLBM
RHVM12
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
6-28
RC(1)77B
RCW(1)23B
RCW(1)26B
RCW(1)29B
RCW(1)32B
RCW(1)35B
RCW(1)38B
RCW(1)41B
RCW(1)44B
RCW(1)47B
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
10-71
RHVM12H
RHVM12H
RHVM12H
RHVM3RH
RHVM3RH
RHVM3RH
RHVM4XH
RHVM4XH
RHVM4XH
RHVMBM
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
6-126
6-126
6-126
6-126
6-126
6-126
6-127
6-127
6-127
6-127
6-127
6-127
6-127
6-127
MCCB 6-88
6-126
6-126
6-126
6-126
6-127
6-126
6-126
6-127
6-126
6-126
6-127
6-126
6-126
6-127
6-127
19-15
PRODUCT
INDEX
Q380
Q380H
Q380HH
Q390
Q390H
Q390HH
QE115
QE115H
QE120
QE120H
Product
Category Page
19
RESI
1-29
1-29
1-29
1-24
1-24
1-24
1-24
1-25
1-25
1-25
Catalog
Number
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
RHVMEMH
RHVMEMH
RHVMEMH
RHVMS02
RHVMS02
RHVMS02
RHVMS12
RHVMS12
RHVMS12
RHVMS16
6-126
6-126
6-127
6-126
6-126
6-127
6-126
6-126
6-127
6-126
RV365SG
RV366G
RV421G
RV422G
RV423G
RV424G
RV425G
RV426G
RV461G
RV462G
RHVMS16
RHVMS16
RHVP3RH
RHVP3RH
RHVP4XH
RHVPBM
RHVPEMH
RHVPS03
RHVPS12
RHVPS24
6-126
6-127
6-127
6-127
6-127
6-127
6-127
6-127
6-127
6-127
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
S09JLD6
S09JLD6
S09JLD62A
S09JLD62A
S09JLD62A
S09MN6
S09MN6
S09MN6
S09MN6
S11FD60
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-43
6-47
6-50
6-54
6-58
6-61
6-63
6-39
S38B
S40007-01GP
S40404-02QG
S40405-015F
S40405-025
S40405-02CO
S40405-02QG
S40405-0BNU
S40407-015F
S40407-01NU
UNPB 10-10
RESG
2-7
2-7
RESG
2-7
RESG
2-7
RESG
2-7
RESG
2-7
RESG
2-7
RESG
2-7
RESG
2-7
SCJD69200
SCJD69200G
SCJD69200NGT
SCJD69200NT
SCJD69300
SCJD69300G
SCJD69300NGT
SCJD69300NT
SCJD69400
SCJD69400G
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
RV463G
RV464G
RV465G
RV465SG
RV466G
RXD63B160
RXD63B180
RXD63B200
RXD63S200A
S01ED62A
BPLU
BPLU
BPLU
BPLU
BPLU
MCCB
MCCB
MCCB
MCCB
MCCB
14-57
14-57
14-57
14-57
14-57
6-62
6-62
6-62
6-72
6-36
S11JLD6
S11JLD6
S11JLD6
S11JLD62A
S11JLD62A
S11JLD62A
S11MN6
S11MN6
S11MN6
S11MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-58
6-61
6-63
S40407-025
S40407-02CO
S40407-02QG
S42505-02RG
S44305-02CV
S44307-02CV
S44704-8265
S44B
S44B
S44B
RESG
RESG
RESG
RESG
RESG
UNPB
UNPB
UNPB
2-7
2-7
2-7
2-7
2-7
2-7
2-8
10-10
10-10
10-10
SCJD69400NGT
SCJD69400NT
SCL
SCLD
SCLD69300
SCLD69300G
SCLD69300NGT
SCLD69300NT
SCLD69400
SCLD69400G
MCCB 6-42
MCCB 6-42
PBSB 10-50
10-61
MCCB 6-46
MCCB 6-46
MCCB 6-46
MCCB 6-46
MCCB 6-46
MCCB 6-46
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
RHVPS24
RJC3400G
RJC4400G
RLC3600G
RLC4600G
RMC3800G
RMC4800G
RS2641
RS2642
RS2643
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
MCCB
MCCB
MCCB
6-127
14-57
14-57
14-57
14-57
14-57
14-57
6-91
6-91
6-91
S01ED62AA
S01ED62AB
S01ED62B
S01FD60
S01JLD6
S01JLD6
S01JLD6
S01JLD62A
S01JLD62A
S01JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-36
6-36
6-36
6-39
6-43
6-47
6-50
6-43
6-47
6-50
S11MN64A
S11MN64A
S11MN64A
S11MN64A
S13FD60
S13JLD6
S13JLD6
S13JLD6
S13JLD62A
S13JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-39
6-43
6-47
6-50
6-43
6-47
S44B
S44B
S44B
S47604-81GP
S47605-02SP
S47704-01NU
S47704-02
S47705-01NU
S47707-01NU
S47707-02
UNPB 10-10
UNPB 10-10
UNPB 10-10
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
SCLD69400NGT
SCLD69400NT
SCLD69500
SCLD69500G
SCLD69500NGT
SCLD69500NT
SCLD69600
SCLD69600G
SCLD69600NGT
SCLD69600NT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
RS2644
RS4755
RS4755
RS4756
RS4756
RS5773
RS5773
RS5774
RS5774
RS5783
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
S01MN6
S01MN6
S01MN6
S01MN6
S01MN64A
S01MN64A
S01MN64A
S02MN6
S02MN6
S02MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-61
6-63
6-54
6-58
6-61
S13JLD62A
S13MN6
S13MN6
S13MN6
S13MN6
S13MN6
S13MN6
S13MN64A
S13MN64A
S13MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-50
6-54
6-54
6-58
6-58
6-61
6-63
6-58
6-61
6-63
S48104-02
S48105-83BU
S48504-92
S48704-82GP
S48707-82GP
S48805-0BNU
S48807-02NU
S56B
S56B
S56B
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-8
RESG
2-7
RESG
2-7
UNPB 10-10
UNPB 10-10
UNPB 10-10
SCMD69600A
SCMD69600AG
SCMD69600AGH
SCMD69600AH
SCMD69600ANGT
SCMD69600ANGTH
SCMD69600ANT
SCMD69600ANTH
SCMD69700A
SCMD69700AG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
RS5783
RS5784
RS5784
RS5785
RS5785
RS5786
RS5786
RS5787
RS5787
RS5788
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-91
S02MN6
S03FD60
S03JLD6
S03JLD6
S03JLD6
S03JLD62A
S03JLD62A
S03JLD62A
S03MN6
S03MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-63
6-39
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-58
S15FD60
S15JLD6
S15JLD6
S15JLD6
S15JLD64A
S15JLD64A
S15JLD64A
S15MN6
S15MN6
S15MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-39
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-58
6-61
S56B
S56B
S62B
S62B
S62B
S62B
S62B
S62B
S68B
S68B
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
SCMD69700AGH
SCMD69700AH
SCMD69700ANGT
SCMD69700ANGTH
SCMD69700ANT
SCMD69700ANTH
SCMD69800A
SCMD69800AG
SCMD69800AGH
SCMD69800AH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
RS5788
RT121413
RT6019A
RT6019HA
RT6067A
RT6067HA
RTLDLF
RTLDLR
RTLDSF
RTLDSR
MCCB
RESG
6-91
2-9
2-9
2-9
2-9
2-9
6-132
6-132
6-132
6-132
S03MN6
S03MN6
S03MN64A
S03MN64A
S03MN64A
S03MN64A
S04FD60
S04JLD6
S04JLD6
S04JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
6-47
6-50
S15MN6
S15MN64A
S15MN64A
S15MN64A
S15MN64A
S16FD60
S16JLD6
S16JLD6
S16JLD6
S16JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-63
6-54
6-58
6-61
6-63
6-39
6-43
6-47
6-50
6-43
S68B
S68B
S68B
S68B
S69623
S69685-1
S9804-9142
S9804-9144
S9804-9145
S9804-9146
UNPB
UNPB
UNPB
UNPB
RESG
RESG
RESG
RESG
RESG
10-10
10-10
10-10
10-10
2-10
2-10
2-7
2-8
2-8
2-8
SCMD69800ANGT
SCMD69800ANGTH
SCMD69800ANT
SCMD69800ANTH
SCND69100A
SCND69100AG
SCND69100AGH
SCND69100AH
SCND69100ANGT
SCND69100ANGTH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-57
6-57
6-57
6-57
6-57
6-57
RTLELR
RTLELR
RTLESR
RTLESR
RTLFLF
RTLFLR
RTLFSF
RTLFSR
RTLJLF
RTLJLR
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-91
6-91
6-91
6-91
6-132
6-132
6-132
6-132
6-133
6-133
S04MN6
S04MN6
S04MN6
S04MN6
S04MN64A
S04MN64A
S04MN64A
S04MN64A
S06FD60
S06MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-54
S16JLD62A
S16JLD62A
S16MN6
S16MN6
S16MN6
S16MN6
S16MN64A
S16MN64A
S16MN64A
S16MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
S9804-9147
S9817-8061
SA1E025
SADU
SADU
SADU
SADU
SADU
SADU
SADU
RESG
RESG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
2-8
2-8
6-82
6-43
6-47
6-50
6-54
6-58
6-61
6-63
SCND69100ANT
SCND69100ANTH
SCND69120A
SCND69120AG
SCND69120AGH
SCND69120AH
SCND69120ANGT
SCND69120ANGTH
SCND69120ANT
SCND69120ANTH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
RTLJSF
RTLJSR
RTLLSF
RTLMSF
RTLNSF
RTU121814
RTU121815
RTU121818
RTU122015
RV321G
MCCB 6-133
MCCB 6-133
6-133
6-133
6-133
2-9
2-9
2-9
2-9
BPLU 14-57
S06MN6
S06MN6
S06MN6
S07FD60
S07JLD6
S07JLD6
S07JLD6
S07JLD62A
S07JLD62A
S07JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-58
6-61
6-63
6-39
6-43
6-47
6-50
6-43
6-47
6-50
S17ED60
S17FD60
S17JLD6
S17JLD6
S17JLD6
S18JLD6
S18JLD6
S18JLD6
S32B
S32B
MCCB 6-36
MCCB 6-39
MCCB 6-43
MCCB 6-47
MCCB 6-50
MCCB 6-43
MCCB 6-47
MCCB 6-50
UNPB 10-10
UNPB 10-10
SADU
SADURMK18
SADURMK18
SADURMK18
SADURMK18
SADURMK18
SADURMK18
SADURMK18
SADURMK18
SBJ1
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
RESG
6-79
6-43
6-47
6-50
6-54
6-58
6-61
6-63
6-79
2-81
SCND69800A
SCND69800AG
SCND69800AGH
SCND69800AH
SCND69800ANGT
SCND69800ANGTH
SCND69800ANT
SCND69800ANTH
SCT1236
SCT432
MCCB 6-57
MCCB 6-57
MCCB 6-57
MCCB 6-57
MCCB 6-57
MCCB 6-57
MCCB 6-57
MCCB 6-57
SWBD 12-25
SWBD 12-25
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
S32B
S32B
S32B
S32B
S35815-2
S38B
S38B
S38B
S38B
S38B
UNPB
UNPB
UNPB
UNPB
RESG
UNPB
UNPB
UNPB
UNPB
UNPB
SBJ4
SBL
SBLBD
SBLBD
SCE
SCED
SCF
SCFD
SCJ
SCJD
RESG
PBSB
PBSB
PBSB
PBSB
PBSB
PBSB
SCT436
SCT632
SCT636
SCT836
SE6
SE6D
SE6D
SEAER
SEAFB
SEAFM
SWBD
SWBD
SWBD
SWBD
PBSB
PBSB
PBSB
RV322G
RV323G
RV324G
RV325G
RV326G
RV361G
RV362G
RV363G
RV364G
RV365G
19-16
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
14-57
S07MN6
S07MN6
S07MN6
S07MN6
S07MN64A
S07MN64A
S07MN64A
S07MN64A
S09FD60
S09JLD6
10-10
10-10
10-10
10-10
2-10
10-10
10-10
10-10
10-10
10-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
2-81
10-50
10-61
12-26
10-50
10-61
10-50
10-61
PBSB 10-50
10-61
12-25
12-25
12-25
12-25
10-50
10-61
10-61
6-90
MCCB 6-130
MCCB 6-130
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
SEAFN
SEAFR
SEAFY
SEALB
SEALM
SEALN
SEALR
SEALY
SEAMB
SEAMM
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-130
6-130
6-130
6-131
6-131
6-131
6-131
6-131
6-131
6-131
SHND69100AH
SHND69100ANGT
SHND69100ANGTH
SHND69100ANT
SHND69100ANTH
SHND69120A
SHND69120AG
SHND69120AGH
SHND69120AH
SHND69120ANGT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
SLEC34***0GED4
SLEC34***0GED4
SLEC34***0GED4
SLEC34***0IGED4
SLEC34***0IGED4
SLEC34***0IGED4
SLEC36***0ED6
SLEC36***0ED6
SLEC36***0ED6
SLEC36***0GED6
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLFC36***0FXD6
SLFC36***0GFXD6
SLFC36***0IGFXD6
SLFC362500FXD6
SLFC362500GFXD6
SLFC362500IGFXD6
SLFC46***0FXD6
SLFC46***0GFXD6
SLFC46***0IGFXD6
SLFC462500FXD6
SEAMN
SEAMR
SEAMY
SEB
SEBD
SF6
SF6D
SHHTD63F2000
SHHTD63F2000H
SHHTD63F2500
MCCB
MCCB
MCCB
PBSB
PBSB
6-131
6-131
6-131
10-50
12-26
10-50
10-61
6-64
6-64
6-64
SHND69120ANGTH
SHND69120ANT
SHND69120ANTH
SHND69800A
SHND69800AG
SHND69800AGH
SHND69800AH
SHND69800ANGT
SHND69800ANGTH
SHND69800ANT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
SLEC36***0GED6
SLEC36***0GED6
SLEC36***0IGED6
SLEC36***0IGED6
SLEC36***0IGED6
SLEC42***0ED2
SLEC42***0ED2
SLEC42***0GED2
SLEC42***0GED2
SLEC42***0IGED2
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLFC462500GFXD6
SLFC462500IGFXD6
SLFC56***0FXD6
SLFC56***0FXD6
SLFC56***0GFXD6
SLFC56***0GFXD6
SLFC56***0IGFXD6
SLFC56***0IGFXD6
SLFL36***0CFD6
SLFL36***0GCFD6
SHND69800ANTH
SHPD69140
SHPD69140G
SHPD69140NGT
SHPD69140NT
SHPD69160
SHPD69160G
SHPD69160NGT
SHPD69160NT
SHTD63F2000
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-60
6-60
6-60
6-60
6-60
6-60
6-60
6-60
6-64
SLEC42***0IGED2
SLEC44***0ED4
SLEC44***0ED4
SLEC44***0ED4
SLEC44***0GED4
SLEC44***0GED4
SLEC44***0GED4
SLEC44***0IGED4
SLEC44***0IGED4
SLEC44***0IGED4
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLEC46***0ED6
SLEC46***0ED6
SLEC46***0ED6
SLEC46***0GED6
SLEC46***0GED6
SLEC46***0GED6
SLEC46***0IGED6
SLEC46***0IGED6
SLEC46***0IGED6
SLEC52***0ED2
Product
Category Page
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
Catalog
Number
Product
Category Page
SLR6060
SLR6100
SLR6200
SLR6400
SLR6600
SLT2100
SLT2200
SLT2400
SLT2600
SLT6100
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU 14-15
BPLU 14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-16
14-16
SLT6200
SLT6400
SLT6600
SLVB*3210
SLVB*3210G
SLVB*3210IG
SLVB*3220
SLVB*3220G
SLVB*3220IG
SLVB*3230
BPLU 14-14
BPLU 14-14
BPLU 14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SLFL36***0IGCFD6
SLFL362500CFD6
SLFL362500CGFD6
SLFL362500ICGFD6
SLFL46***0CFD6
SLFL46***0GCFD6
SLFL46***0IGCFD6
SLFL462500CFD6
SLFL462500GCFD6
SLFL462500IGCFD6
14-16
BPLU 14-16
14-16
14-16
14-16
14-16
14-16
BPLU 14-16
BPLU 14-16
BPLU 14-16
SLVB*3230G
SLVB*3230IG
SLVB*3240
SLVB*3240G
SLVB*3240IG
SLVB*3250
SLVB*3250G
SLVB*3250IG
SLVB*3260
SLVB*3260G
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLFL56***0CFD6
SLFL56***0CFD6
SLFL56***0GCFD6
SLFL56***0GCFD6
SLFL56***0IGCFD6
SLFL56***0IGCFD6
SLJ2600
SLJ6600
SLJC36***0GJXD6
SLJC36***0IGJXD6
14-16
14-16
14-16
14-16
14-16
14-16
BPLU 14-14
BPLU 14-14
14-15
14-15
SLVB*3260IG
SLVB*3610
SLVB*3610G
SLVB*3610IG
SLVB*3620
SLVB*3620G
SLVB*3620IG
SLVB*3630
SLVB*3630G
SLVB*3630IG
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SHJD69200NTH
SHJD69300
SHJD69300G
SHJD69300GH
SHJD69300H
SHJD69300NGT
SHJD69300NGTH
SHJD69300NT
SHJD69300NTH
SHJD69400
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
SHTD63F2000H
SHTD63F2500
SHTD63F2500H
SHTD63F3200
SHTD63F3200H
SJ1
SJ1D
SJ2D
SJD69200
SJD69200G
PBSB
PBSB
PBSB
MCCB
MCCB
6-64
6-64
6-64
6-64
6-64
10-50
10-61
10-61
6-42
6-42
SHJD69400G
SHJD69400GH
SHJD69400H
SHJD69400NGT
SHJD69400NGTH
SHJD69400NT
SHJD69400NTH
SHLD69300
SHLD69300G
SHLD69300NGT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-46
6-46
6-46
SJD69200GH
SJD69200H
SJD69200NGT
SJD69200NGTH
SJD69200NT
SJD69200NTH
SJD69300
SJD69300G
SJD69300GH
SJD69300H
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
SLEC52***0ED2
SLEC52***0GED2
SLEC52***0GED2
SLEC52***0IGED2
SLEC52***0IGED2
SLEC54***0ED4
SLEC54***0ED4
SLEC54***0ED4
SLEC54***0GED4
SLEC54***0GED4
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLJC36***0JXD6
SLJC46***0GJXD6
SLJC46***0IGJXD6
SLJC46***0JXD6
SLJC562000GJXD6
SLJC562000IGJXD6
SLJC562000JXD6
SLJCS56***0GJXD6
SLJCS56***0IGJXD6
SLJCS56***0JXD6
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLVB*3640
SLVB*3640G
SLVB*3640IG
SLVB*3650
SLVB*3650G
SLVB*3650IG
SLVB*3660
SLVB*3660G
SLVB*3660IG
SLVB*4210
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SHLD69300NT
SHLD69400
SHLD69400G
SHLD69400NGT
SHLD69400NT
SHLD69500
SHLD69500G
SHLD69500NGT
SHLD69500NT
SHLD69600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
SJD69300NGT
SJD69300NGTH
SJD69300NT
SJD69300NTH
SJD69400
SJD69400G
SJD69400GH
SJD69400H
SJD69400NGT
SJD69400NGTH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
6-42
SLEC54***0GED4
SLEC54***0IGED4
SLEC54***0IGED4
SLEC54***0IGED4
SLEC56***0ED6
SLEC56***0ED6
SLEC56***0ED6
SLEC56***0GED6
SLEC56***0GED6
SLEC56***0GED6
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLJL36***0CGJD6
SLJL36***0CJD6
SLJL36***0ICGJD6
SLJL46***0CJD6
SLJL46***0GCJD6
SLJL46***0IGCJD6
SLJL562000CJD6
SLJL562000GCJD6
SLJL562000IGCJD6
SLJLS56***0CJD6
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
SLVB*4210G
SLVB*4210IG
SLVB*4220
SLVB*4220G
SLVB*4220IG
SLVB*4230
SLVB*4230G
SLVB*4230IG
SLVB*4240
SLVB*4240G
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SHLD69600G
SHLD69600NGT
SHLD69600NT
SHMD69600A
SHMD69600AG
SHMD69600AGH
SHMD69600AH
SHMD69600ANGT
SHMD69600ANGTH
SHMD69600ANT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-46
6-46
6-46
6-53
6-53
6-53
6-53
6-53
6-53
6-53
SJD69400NT
SJD69400NTH
SL0420
SL6
SL6D
SLD69300
SLD69300G
SLD69300NGT
SLD69300NT
SLD69400
MCCB 6-42
MCCB 6-42
HDSS 3-20
PBSB 10-50
PBSB 10-61
MCCB 6-46
MCCB 6-46
MCCB 6-46
MCCB 6-46
MCCB 6-46
SLEC56***0IGED6
SLEC56***0IGED6
SLEC56***0IGED6
SLEL36***0CED6
SLEL36***0CED6
SLEL36***0CED6
SLEL36***0GCED6
SLEL36***0GCED6
SLEL36***0GCED6
SLEL36***0IGCED6
14-15
14-15
14-15
14-16
14-16
14-16
14-16
14-16
14-16
14-16
SLJLS56***0GCJD6
SLJLS56***0IGCJD6
SLLCS36***0GLXD6
SLLCS36***0IGLXD6
SLLCS36***0LXD6
SLLCS46***0GLXD6
SLLCS46***0IGLXD6
SLLCS46***0LXD6
SLLLS36***0CLD6
SLLLS36***0GCLD6
14-16
14-16
14-15
14-15
14-15
14-15
14-15
14-15
14-16
14-16
SLVB*4240IG
SLVB*4250
SLVB*4250G
SLVB*4250IG
SLVB*4260
SLVB*4260G
SLVB*4260IG
SLVB*4610
SLVB*4610G
SLVB*4610IG
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SHMD69600ANTH
SHMD69700A
SHMD69700AG
SHMD69700AGH
SHMD69700AH
SHMD69700ANGT
SHMD69700ANGTH
SHMD69700ANT
SHMD69700ANTH
SHMD69800A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
SLD69400G
SLD69400NGT
SLD69400NT
SLD69500
SLD69500G
SLD69500NGT
SLD69500NT
SLD69600
SLD69600G
SLD69600NGT
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
6-46
SLEL36***0IGCED6
SLEL36***0IGCED6
SLEL46***0CED6
SLEL46***0CED6
SLEL46***0CED6
SLEL46***0GCED6
SLEL46***0GCED6
SLEL46***0GCED6
SLEL46***0IGCED6
SLEL46***0IGCED6
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
SLLLS36***0IGCLD6
SLLLS46***0CLD6
SLLLS46***0GCLD6
SLLLS46***0IGCLD6
SLM1D
SLM1D
SLMCS36***0GMXD6
SLMCS36***0IGMXD6
SLMCS36***0MXD6
SLMCS46***0GMXD6
14-16
14-16
14-16
14-16
10-61
12-26
14-15
14-15
14-15
14-15
SLVB*4620
SLVB*4620G
SLVB*4620IG
SLVB*4630
SLVB*4630G
SLVB*4630IG
SLVB*4640
SLVB*4640G
SLVB*4640IG
SLVB*4650
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SHMD69800AG
SHMD69800AGH
SHMD69800AH
SHMD69800ANGT
SHMD69800ANGTH
SHMD69800ANT
SHMD69800ANTH
SHND69100A
SHND69100AG
SHND69100AGH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-57
6-57
6-57
SLD69600NT
SLEC32***0ED2
SLEC32***0ED2
SLEC32***0GED2
SLEC32***0GED2
SLEC32***0IGED2
SLEC32***0IGED2
SLEC34***0ED4
SLEC34***0ED4
SLEC34***0ED4
MCCB
6-46
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
14-15
SLEL46***0IGCED6
SLEL56***0CED6
SLEL56***0CED6
SLEL56***0CED6
SLEL56***0GCED6
SLEL56***0GCED6
SLEL56***0GCED6
SLEL56***0IGCED6
SLEL56***0IGCED6
SLEL56***0IGCED6
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
14-16
SLMCS46***0IGMXD6
SLMCS46***0MXD6
SLPGR3140G
SLR2030
SLR2060
SLR2100
SLR2200
SLR2400
SLR2600
SLR6030
14-15
14-15
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SLVB*4650G
SLVB*4650IG
SLVB*4660
SLVB*4660G
SLVB*4660IG
SLVB*5210
SLVB*5210G
SLVB*5210IG
SLVB*5220
SLVB*5220G
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-17
PRODUCT
INDEX
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-64
6-64
6-64
6-42
6-42
6-42
6-42
6-42
6-42
6-42
19
SHHTD63F2500H
SHHTD63F3200
SHHTD63F3200H
SHJD69200
SHJD69200G
SHJD69200GH
SHJD69200H
SHJD69200NGT
SHJD69200NGTH
SHJD69200NT
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
SLVB*5220IG
SLVB*5230
SLVB*5230G
SLVB*5230IG
SLVB*5240
SLVB*5240G
SLVB*5240IG
SLVB*5250
SLVB*5250G
SLVB*5250IG
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SND69120AGH
SND69120AH
SND69120ANGT
SND69120ANGTH
SND69120ANT
SND69120ANTH
SND69800A
SND69800AG
SND69800AGH
SND69800AH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
SRTDR3
SRTFF3
SRTFR3
SRTJF3
SRTJR3
SRTLF3
SRTMF3
SRTNF3
SSBP
SSBPH
6-132
MCCB 6-132
6-132
6-133
6-133
6-133
6-133
6-133
MCCB 6-133
MCCB 6-133
STRLB24DC
STRLB24DC
STRLB24DC
STRLC60DC
STRLC60DC
STRLC60DC
STRLC60DC
STRLD125DC
STRLD125DC
STRLD125DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
6-107
6-111
SUAT111-0PGP
SUAT111-0PQG
SUAT111-0PZA
SUAT111-PG
SUAT121-0BCO
SUAT121-0GWR
SUAT121-BBCO
SUAT121-BGWR
SUAT121-BM
SUAT121-PBCO
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-4
2-4
2-4
2-4
2-4
2-4
2-4
2-4
2-4
2-4
SLVB*5610
SLVB*5610G
SLVB*5610IG
SLVB*5620
SLVB*5620G
SLVB*5620IG
SLVB*5630
SLVB*5630G
SLVB*5630IG
SLVB*5640
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
14-14
SND69800ANGT
SND69800ANGTH
SND69800ANT
SND69800ANTH
SP2211
SP2211RJ
SP2211RJB
SP221FK
SP3311
SP3311RJ
MCCB
MCCB
MCCB
MCCB
RESG
RESG
RESG
RESG
RESG
RESG
6-57
6-57
6-57
6-57
2-71
2-72
2-72
2-71
2-71
2-72
SSCJ
SSCJD
SSCL
SSCLD
SSH075
SSH100
SSH125
SSH150
SSH200
SSJ1
PBSB 10-50
10-61
PBSB 10-50
PBSB 10-61
HDSS 3-20
HDSS 3-20
HDSS 3-20
HDSS 3-20
HDSS 3-20
10-50
STRLD125DC
STRLE250DC
STRLE250DC
STRLE250DC
STRLE250DC
STRLM60
STRLM60
STRLM60
STRLM60
STRLN120
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-99
6-103
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
SUAT121-PGWR
SUAT317-0FP
SUAT317-0G
SUAT317-0GF
SUAT317-0MXA
SUAT317-0PCV
SUAT317-0PDN
SUAT317-0PGP
SUAT317-0PQG
SUAT317-0PZA
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-4
2-5
2-5
2-5
2-5
2-5
2-5
2-5
2-5
2-5
SLVB*5640G
SLVB*5640IG
SLVB*5650
SLVB*5650G
SLVB*5650IG
SMB6
SMBKED1
SMBKED3
SMBKFD1
SMBKFD3
SP3311RJB
SP331FK
SP4212
SP4212RJ
SP4212RJB
SP4212RJL
SP422FK
SP4312
SP4312RJ
SP4312RJB
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-72
2-71
2-71
2-72
2-72
2-73
2-71
2-71
2-72
2-72
SSJ1D
SSL6
SSL6D
SSMND
SSMND
SSMND
SSMND
SSRK33
SSRK34
SSRK35
PBSB 10-61
PBSB 10-50
10-61
PBSB 10-61
PBSB 10-61
PBSB 12-26
PBSB 12-26
HDSS 4-12
HDSS 4-12
HDSS 12-23
STRLN120
STRLN120
STRLN120
STRLS277
STRLS277
STRLS277
STRLS277
STRLV600
STRLV600
STRLV600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
6-107
6-111
SUAT317-DGZ
SUAT327-0GWR
SUAT327-0MCO
SUAT417-0PQG
SUAT417-PG
SUAT417-XFP
SUAT417-XG
SUAT417-XGDU
SUAT417-XGF
SUAT417-XPQG
RESG
MCCB
UNPB
UNPB
UNPB
UNPB
14-14
14-14
14-14
14-14
14-14
6-87
10-12
10-12
10-12
10-12
2-5
2-5
2-5
2-5
2-5
2-5
2-5
2-5
2-5
2-5
SMBKJD1
SMBKJD3
SMBKLD1
SMBKLD3
SMBKQJ1
SMBKQJ3
SMD69600A
SMD69600AG
SMD69600AGH
SMD69600AH
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
MCCB
MCCB
MCCB
MCCB
10-12
10-12
10-12
10-12
10-12
10-12
6-53
6-53
6-53
6-53
SP4312RJL
SP432FK
SP4411
SP4411RJ
SP4411RJB
SP4412
SP4412RJ
SP4412RJB
SP4412RJL
SP441FK
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-73
2-71
2-71
2-72
2-72
2-71
2-72
2-72
2-73
2-71
SSRK36
STD20TLI
STD20TLIG
STD20TLS
STD20TLSG
STD20TLSI
STD20TLSIG
STD32TCON
STD63F2000
STD63F2000H
HDSS 12-23
6-64
6-64
6-64
6-64
6-64
6-64
MCCB 6-64
6-64
6-64
STRLV600
STRPB24DC
STRPB24DC
STRPB24DC
STRPC60DC
STRPC60DC
STRPC60DC
STRPD125DC
STRPD125DC
STRPD125DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-99
6-115
6-119
6-122
6-115
6-119
6-122
6-115
6-119
6-122
SUAT427-PMCO
SUAT427-XMWR
SUAT517-PDG
SUAT618-XGNM
SUK1000TA
SUK350TA
SUK600TA
SX302A10F
SX302A10P
SX302A10R
SMD69600ANGT
SMD69600ANGTH
SMD69600ANT
SMD69600ANTH
SMD69700A
SMD69700AG
SMD69700AGH
SMD69700AH
SMD69700ANGT
SMD69700ANGTH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
SP442FK
SP4511
SP4511RJ
SP4511RJB
SP4561FK
SP4611
SP4611RJ
SP4611RJB
SP5411
SP6412
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-71
2-71
2-72
2-72
2-71
2-71
2-72
2-72
2-71
2-71
STD63F2500
STD63F2500H
STD63F3200
STD63F3200H
STDAPM
STDAS
STDAS10
STDAS12
STDAS2
STDAS4
6-64
6-64
6-64
6-64
6-65
6-65
6-65
6-65
6-65
6-65
STRPE250DC
STRPE250DC
STRPE250DC
STRPM60
STRPM60
STRPM60
STRPN120
STRPN120
STRPN120
STRPS277
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-115
6-119
6-122
6-115
6-119
6-122
6-115
6-119
6-122
6-115
SX302A10R
SX302A14F
SX302A14P
SX302A19F
SX302A20F
SX302A20P
SX302A20R
SX302A24F
SX302A24P
SX302A24R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SMD69700ANT
SMD69700ANTH
SMD69800A
SMD69800AG
SMD69800AGH
SMD69800AH
SMD69800ANGT
SMD69800ANGTH
SMD69800ANT
SMD69800ANTH
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
6-53
SP642FK
SP6511
SP6511RJ
SP6511RJB
SP6512
SP6512RJ
SP6512RJB
SP6512RJL
SP6561FK
SP6562FK
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-71
2-71
2-72
2-72
2-71
2-72
2-72
2-73
2-71
2-71
STDAS6
STDAS8
STDBA120
STDBA125
STDBA24
STDBA48
STDDM
STDDMR120
STDDMR125
STDDMR24
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
STRPS277
STRPS277
STRPV600
STRPV600
STRPV600
SUA2311-0PGP
SUA2311-0PQG
SUA2717-YPDN
SUA2717-YPGP
SUA2717-YPQG
MCCB
MCCB
MCCB
MCCB
MCCB
RESG
RESG
RESG
RESG
RESG
6-119
6-122
6-115
6-119
6-122
2-6
2-6
2-6
2-6
2-6
SX302A29F
SX302A30F
SX302A30P
SX302A30R
SX302A34F
SX302A34P
SX302A34R
SX302A39F
SX302C10F
SX302C10P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-8
14-8
SMF
SMF
SMF
SMLKA1
SMLKA3
SMMBQMK
SMMCEMK
SMMEDMK
SMMFDMK
SMMHEMK
NEMA
NEMA
NEMA
UNPB
UNPB
16-150
16-6
16-79
10-12
10-12
12-26
12-26
12-26
12-26
12-26
SP6611
SP6611RJ
SP6611RJB
SP6612
SP6612RJ
SP6612RJB
SP6612RJL
SP8612
SP8612RJ
SPD69140
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
MCCB
2-71
2-72
2-72
2-71
2-72
2-72
2-73
2-71
2-72
6-60
STDDMR48
STDGFM
STDMIF32
STDPLD
STDST12
STDST120
STDST125
STDST24
STDST240
STDST48
6-65
6-65
6-87
6-86
6-65
6-65
6-65
6-65
6-65
6-65
SUA2717-YPZA
SUA3311-0PGP
SUA3311-0PQG
SUA3717-YPDN
SUA3717-YPGP
SUA3717-YPZA
SUA4311-0PGP
SUA4311-0PQG
SUA4719-YPDN
SUA4719-YPGP
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-6
2-6
2-6
2-6
2-6
2-6
2-6
2-6
2-6
2-6
SX302C10R
SX302C14F
SX302C14P
SX302C14R
SX302C19F
SX302C20F
SX302C20P
SX302C20R
SX302C24F
SX302C24P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SMMNGMK
SMMQJMK
SMMTFMK
SMND
SMND
SMND
SMND
SNB
SNBD
SNBD
12-26
12-26
12-26
10-61
10-61
12-26
12-26
PBSB 10-50
PBSB 10-61
PBSB 12-26
SPD69140G
SPD69140NGT
SPD69140NT
SPD69160
SPD69160G
SPD69160NGT
SPD69160NT
SQJ
SQJD
SRSS
MCCB 6-60
MCCB 6-60
MCCB 6-60
MCCB 6-60
MCCB 6-60
MCCB 6-60
MCCB 6-60
PBSB 10-50
PBSB 10-61
RESG 2-10
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
6-65
SUA4719-YPQG
SUA4719-YPZA
SUA5719-KPDN
SUA5719-KPGP
SUA6719-KPQG
SUA6719-KPZA
SUAS817-PPGP
SUAS818-PGNM
SUAS877-PG
SUAS877-PPCV
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-6
2-6
2-6
2-6
2-6
2-6
2-5
2-5
2-5
2-5
SX302C24R
SX302C29F
SX302C30F
SX302C30P
SX302C30R
SX302C34F
SX302C34P
SX302C34R
SX302C39F
SX304A10F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-5
SND69100A
SND69100AG
SND69100AGH
SND69100AH
SND69100ANGT
SND69100ANGTH
SND69100ANT
SND69100ANTH
SND69120A
SND69120AG
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
SRSS
SRSS
SRSTD
SRSTD
SRSTD
SRSW
SRSW
SRSW
SRSW
SRTDF3
6-65
6-65
6-65
6-25
6-33
6-25
6-33
6-25
6-33
6-103
SUAS877-PPDN
SUAS877-PPGP
SUAS877-PPZ
SUAS877-PPZA
SUAS917-XJCA
SUAT111-0G
SUAT111-0GF
SUAT111-0JCA
SUAT111-0MXA
SUAT111-0PDN
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-5
2-5
2-5
2-5
2-5
2-4
2-4
2-4
2-4
2-4
SX304A10P
SX304A10R
SX304A14F
SX304A14P
SX304A14R
SX304A19F
SX304A20F
SX304A20P
SX304A20R
SX304A24F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
19-18
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
6-57
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-74
2-81
2-10
2-26
2-81
2-10
2-26
2-74
2-81
6-132
STDST480
STDTBLB
STDTBLT
STDTBM
STDTBRB
STDTBRT
STDUV120
STDUV125
STDUV24
STDUV240
STDUV48
STDUV480
STDUV600
STREM60D
STREM60D
STRER240
STRER240
STREV600
STREV600
STRLB24DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-5
2-5
2-5
2-5
2-74
2-74
2-74
14-5
14-5
14-5
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
SX308A30P
SX308A30R
SX308A30R
SX308A34F
SX308A34F
SX308A34P
SX308A34P
SX308A34R
SX308A34R
SX308A39F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX312A30R
SX312A34F
SX312A34P
SX312A34R
SX312A39F
SX312C10F
SX312C10P
SX312C10R
SX312C14F
SX312C14P
14-6
14-6
14-6
14-6
14-6
14-9
14-9
14-9
14-9
14-9
SX316C10P
SX316C10R
SX316C14F
SX316C14P
SX316C14R
SX316C19F
SX316C20F
SX316C20P
SX316C20R
SX316C24F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX325C20F
SX325C20P
SX325C20R
SX325C24F
SX325C24P
SX325C24R
SX325C29F
SX325C30F
SX325C30P
SX325C30R
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX304C10F
SX304C10P
SX304C10R
SX304C14F
SX304C14P
SX304C14R
SX304C19F
SX304C20F
SX304C20P
SX304C20R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX308A39F
SX308C10F
SX308C10P
SX308C10R
SX308C14F
SX308C14P
SX308C14R
SX308C19F
SX308C20F
SX308C20P
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX312C14R
SX312C19F
SX312C20F
SX312C20P
SX312C20R
SX312C24F
SX312C24P
SX312C24R
SX312C29F
SX312C30F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX316C24P
SX316C24R
SX316C29F
SX316C30F
SX316C30P
SX316C30R
SX316C34F
SX316C34P
SX316C34R
SX316C39F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX325C34F
SX325C34P
SX325C34R
SX325C39F
SX330A10F
SX330A10P
SX330A10R
SX330A14F
SX330A14P
SX330A14R
14-9
14-9
14-9
14-9
14-7
14-7
14-7
14-7
14-7
14-7
SX304C24F
SX304C24P
SX304C24R
SX304C29F
SX304C30F
SX304C30P
SX304C30R
SX304C34F
SX304C34P
SX304C34R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX308C20R
SX308C24F
SX308C24P
SX308C24R
SX308C29F
SX308C30F
SX308C30P
SX308C30R
SX308C34F
SX308C34P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX312C30P
SX312C30R
SX312C34F
SX312C34P
SX312C34R
SX312C39F
SX313A10F
SX313A10F
SX313A10P
SX313A10P
14-9
14-9
14-9
14-9
14-9
14-9
14-6
14-6
14-6
14-6
SX320A10F
SX320A10P
SX320A10R
SX320A14F
SX320A14P
SX320A14R
SX320A19F
SX320A20F
SX320A20P
SX320A20R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX330A19F
SX330A20F
SX330A20P
SX330A20R
SX330A24F
SX330A24P
SX330A24R
SX330A29F
SX330A30F
SX330A30P
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX304C39F
SX306A10F
SX306A10P
SX306A10R
SX306A14F
SX306A14P
SX306A14R
SX306A19F
SX306A20F
SX306A20P
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX308C34R
SX308C39F
SX310A10F
SX310A10P
SX310A10R
SX310A14F
SX310A14P
SX310A14R
SX310A19F
SX310A20F
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX313A10R
SX313A10R
SX313A14F
SX313A14F
SX313A14P
SX313A14P
SX313A14R
SX313A14R
SX313A19F
SX313A19F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX320A24F
SX320A24P
SX320A24R
SX320A29F
SX320A30F
SX320A30P
SX320A30R
SX320A34F
SX320A34P
SX320A34R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX330A30R
SX330A34F
SX330A34P
SX330A34R
SX330A39F
SX330C10F
SX330C10P
SX330C10R
SX330C14F
SX330C14P
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
14-10
14-10
SX306A20R
SX306A24F
SX306A24P
SX306A24R
SX306A29F
SX306A30F
SX306A30P
SX306A30R
SX306A34F
SX306A34P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX310A20P
SX310A20R
SX310A24F
SX310A24P
SX310A24R
SX310A29F
SX310A30F
SX310A30P
SX310A30R
SX310A34F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX313A30F
SX313A30P
SX313A30R
SX313A34F
SX313A34P
SX313A34R
SX313A39F
SX313C10F
SX313C10P
SX313C10R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-9
14-9
14-9
SX320A39F
SX320C10F
SX320C10P
SX320C10R
SX320C14F
SX320C14P
SX320C14R
SX320C19F
SX320C20F
SX320C20P
14-6
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX330C14R
SX330C19F
SX330C20F
SX330C20P
SX330C20R
SX330C24F
SX330C24P
SX330C24R
SX330C29F
SX330C30F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX306A34R
SX306A39F
SX306C10F
SX306C10P
SX306C10R
SX306C14F
SX306C14P
SX306C14R
SX306C19F
SX306C20F
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX310A34P
SX310A34R
SX310A39F
SX310C10F
SX310C10P
SX310C10R
SX310C14F
SX310C14P
SX310C14R
SX310C19F
14-5
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX313C14F
SX313C14P
SX313C14R
SX313C19F
SX313C20F
SX313C20P
SX313C20R
SX313C24F
SX313C24P
SX313C24R
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX320C20R
SX320C24F
SX320C24P
SX320C24R
SX320C29F
SX320C30F
SX320C30P
SX320C30R
SX320C34F
SX320C34P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX330C30P
SX330C30R
SX330C34F
SX330C34P
SX330C34R
SX330C39F
SX332A10F
SX332A10P
SX332A10R
SX332A14F
14-10
14-10
14-10
14-10
14-10
14-10
14-7
14-7
14-7
14-7
SX306C20P
SX306C20R
SX306C24F
SX306C24P
SX306C24R
SX306C29F
SX306C30F
SX306C30P
SX306C30R
SX306C34F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX310C20F
SX310C20P
SX310C20R
SX310C24F
SX310C24P
SX310C24R
SX310C29F
SX310C30F
SX310C30P
SX310C30R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX313C29F
SX313C30F
SX313C30P
SX313C30R
SX313C34F
SX313C34P
SX313C34R
SX313C39F
SX316A10F
SX316A10P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-6
14-6
SX320C34R
SX320C39F
SX325A10F
SX325A10P
SX325A10R
SX325A14F
SX325A14P
SX325A14R
SX325A19F
SX325A20F
14-9
14-9
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX332A14P
SX332A14R
SX332A19F
SX332A20F
SX332A20P
SX332A20R
SX332A24F
SX332A24P
SX332A24R
SX332A29F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX306C34P
SX306C34R
SX306C39F
SX308A10F
SX308A10P
SX308A10R
SX308A14F
SX308A14P
SX308A14R
SX308A19F
14-8
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX310C34F
SX310C34P
SX310C34R
SX310C39F
SX312A10F
SX312A10P
SX312A10R
SX312A14F
SX312A14P
SX312A14R
14-8
14-8
14-8
14-8
14-6
14-6
14-6
14-6
14-6
14-6
SX316A10R
SX316A14F
SX316A14P
SX316A14R
SX316A19F
SX316A20F
SX316A20P
SX316A20R
SX316A24F
SX316A24P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX325A20P
SX325A20R
SX325A24F
SX325A24P
SX325A24R
SX325A29F
SX325A30F
SX325A30P
SX325A30R
SX325A34F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX332A30F
SX332A30P
SX332A30R
SX332A34F
SX332A34P
SX332A34R
SX332A39F
SX332C10F
SX332C10P
SX332C10R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
SX308A20F
SX308A20P
SX308A20R
SX308A24F
SX308A24P
SX308A24R
SX308A29F
SX308A30F
SX308A30F
SX308A30P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX312A19F
SX312A20F
SX312A20P
SX312A20R
SX312A24F
SX312A24P
SX312A24R
SX312A29F
SX312A30F
SX312A30P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX316A24R
SX316A29F
SX316A30F
SX316A30P
SX316A30R
SX316A34F
SX316A34P
SX316A34R
SX316A39F
SX316C10F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-9
SX325A34P
SX325A34R
SX325A39F
SX325C10F
SX325C10P
SX325C10R
SX325C14F
SX325C14P
SX325C14R
SX325C19F
14-7
14-7
14-7
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX332C14F
SX332C14P
SX332C14R
SX332C19F
SX332C20F
SX332C20P
SX332C20R
SX332C24F
SX332C24P
SX332C24R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-19
PRODUCT
INDEX
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
19
SX304A24P
SX304A24R
SX304A29F
SX304A30F
SX304A30P
SX304A30R
SX304A34F
SX304A34P
SX304A34R
SX304A39F
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
SX332C29F
SX332C30F
SX332C30P
SX332C30R
SX332C34F
SX332C34P
SX332C34R
SX332C39F
SX340A10F
SX340A10P
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-7
14-7
SX402A34R
SX402A39F
SX402C10F
SX402C10P
SX402C10R
SX402C14F
SX402C14P
SX402C14R
SX402C19F
SX402C20F
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX406C14P
SX406C14R
SX406C19F
SX406C20F
SX406C20P
SX406C20R
SX406C24F
SX406C24P
SX406C24R
SX406C29F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX410C34F
SX410C34P
SX410C34R
SX410C39F
SX412A10F
SX412A10P
SX412A10R
SX412A14F
SX412A14P
SX412A14R
14-8
14-8
14-8
14-8
14-6
14-6
14-6
14-6
14-6
14-6
SX416A10R
SX416A14F
SX416A14P
SX416A14R
SX416A19F
SX416A20F
SX416A20P
SX416A20R
SX416A24F
SX416A24P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX340A10R
SX340A14F
SX340A14P
SX340A14R
SX340A19F
SX340A20F
SX340A20P
SX340A20R
SX340A24F
SX340A24P
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX402C20P
SX402C20R
SX402C24F
SX402C24P
SX402C24R
SX402C29F
SX402C30F
SX402C30P
SX402C30R
SX402C34F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX406C30F
SX406C30P
SX406C30R
SX406C34F
SX406C34P
SX406C34R
SX406C39F
SX408A20F
SX408A20P
SX408A20R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-5
14-5
14-5
SX412A19F
SX412A20F
SX412A20P
SX412A20R
SX412A24F
SX412A24P
SX412A24R
SX412A29F
SX412A30F
SX412A30P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX416A24R
SX416A29F
SX416A30F
SX416A30P
SX416A30R
SX416A34F
SX416A34P
SX416A34R
SX416A39F
SX416C10F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-9
SX340A24R
SX340A29F
SX340A30F
SX340A30P
SX340A30R
SX340A34F
SX340A34P
SX340A34R
SX340A39F
SX340C10F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-10
SX402C34P
SX402C34R
SX402C39F
SX404A10F
SX404A10P
SX404A10R
SX404A14F
SX404A14P
SX404A14R
SX404A19F
14-8
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX408A24F
SX408A24P
SX408A24R
SX408A29F
SX408A30F
SX408A30P
SX408A30R
SX408A34F
SX408A34P
SX408A34R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX412A30R
SX412A34F
SX412A34P
SX412A34R
SX412A39F
SX412C10F
SX412C10P
SX412C10R
SX412C14F
SX412C14P
14-6
14-6
14-6
14-6
14-6
14-9
14-9
14-9
14-9
14-9
SX416C10P
SX416C10R
SX416C14F
SX416C14P
SX416C14R
SX416C19F
SX416C20F
SX416C20P
SX416C20R
SX416C24F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX340C10P
SX340C10R
SX340C14F
SX340C14P
SX340C14R
SX340C19F
SX340C20F
SX340C20P
SX340C20R
SX340C24F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX404A20F
SX404A20P
SX404A20R
SX404A24F
SX404A24P
SX404A24R
SX404A29F
SX404A30F
SX404A30P
SX404A30R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX408A39F
SX408C10F
SX408C10P
SX408C10R
SX408C14F
SX408C14P
SX408C14R
SX408C19F
SX408C20F
SX408C20P
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX412C14R
SX412C19F
SX412C20F
SX412C20P
SX412C20R
SX412C24F
SX412C24P
SX412C24R
SX412C29F
SX412C30F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX416C24P
SX416C24R
SX416C29F
SX416C30F
SX416C30P
SX416C30R
SX416C34F
SX416C34P
SX416C34R
SX416C39F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX340C24P
SX340C24R
SX340C29F
SX340C30F
SX340C30P
SX340C30R
SX340C34F
SX340C34P
SX340C34R
SX340C39F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX404A34F
SX404A34P
SX404A34R
SX404A39F
SX404C10F
SX404C10P
SX404C10P
SX404C14F
SX404C14P
SX404C14R
14-5
14-5
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
SX408C20R
SX408C24F
SX408C24P
SX408C24R
SX408C29F
SX408C30F
SX408C30P
SX408C30R
SX408C34F
SX408C34P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX412C30P
SX412C30R
SX412C34F
SX412C34P
SX412C34R
SX412C39F
SX413A10F
SX413A10P
SX413A10R
SX413A14F
14-9
14-9
14-9
14-9
14-9
14-9
14-6
14-6
14-6
14-6
SX420A10F
SX420A10P
SX420A10R
SX420A14F
SX420A14P
SX420A14R
SX420A19F
SX420A20F
SX420A20P
SX420A20R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX350C10F
SX350C10P
SX350C10R
SX350C14F
SX350C14P
SX350C14R
SX350C19F
SX350C20F
SX350C20P
SX350C20R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX404C19F
SX404C20F
SX404C20P
SX404C20R
SX404C24F
SX404C24P
SX404C24R
SX404C29F
SX404C30F
SX404C30P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX408C34R
SX408C39F
SX410A10F
SX410A10P
SX410A10R
SX410A14F
SX410A14P
SX410A14R
SX410A19F
SX410A20F
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX413A14P
SX413A14R
SX413A19F
SX413A20F
SX413A20P
SX413A20R
SX413A24F
SX413A24P
SX413A24R
SX413A29F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX420A24F
SX420A24P
SX420A24R
SX420A29F
SX420C10F
SX420C10P
SX420C10R
SX420C14F
SX420C14P
SX420C14R
14-6
14-6
14-6
14-6
14-9
14-9
14-9
14-9
14-9
14-9
SX350C24F
SX350C24P
SX350C24R
SX350C29F
SX350C30F
SX350C30P
SX350C30R
SX350C34F
SX350C34P
SX350C34R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX404C30R
SX404C34F
SX404C34P
SX404C34R
SX404C39F
SX406A10F
SX406A10P
SX406A10R
SX406A14F
SX406A14P
14-8
14-8
14-8
14-8
14-8
14-5
14-5
14-5
14-5
14-5
SX410A20P
SX410A20R
SX410A24F
SX410A24P
SX410A24R
SX410A29F
SX410A30F
SX410A30P
SX410A30R
SX410A34F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX413A30F
SX413A30P
SX413A30R
SX413A34F
SX413A34P
SX413A34R
SX413A39F
SX413C10F
SX413C10P
SX413C10R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-9
14-9
14-9
SX420C19F
SX420C20F
SX420C20P
SX420C20R
SX420C24F
SX420C24P
SX420C24R
SX420C29F
SX420C30F
SX420C30P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX350C39F
SX402A10F
SX402A10P
SX402A10R
SX402A14F
SX402A14P
SX402A14R
SX402A19F
SX402A20F
SX402A20P
14-10
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX406A14R
SX406A19F
SX406A20F
SX406A20P
SX406A20R
SX406A24F
SX406A24P
SX406A24R
SX406A29F
SX406A30F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX410A34P
SX410A34R
SX410A39F
SX410C10F
SX410C10P
SX410C10R
SX410C14F
SX410C14P
SX410C14R
SX410C19F
14-5
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX413C14F
SX413C14P
SX413C14R
SX413C19F
SX413C20F
SX413C20P
SX413C20R
SX413C24F
SX413C24P
SX413C24R
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX420C30R
SX420C34F
SX420C34P
SX420C34R
SX420C39F
SX425A10F
SX425A10P
SX425A10R
SX425A14F
SX425A14P
14-9
14-9
14-9
14-9
14-9
14-7
14-7
14-7
14-7
14-7
SX402A20R
SX402A24F
SX402A24P
SX402A24R
SX402A29F
SX402A30F
SX402A30P
SX402A30R
SX402A34F
SX402A34P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX406A30P
SX406A30R
SX406A34F
SX406A34P
SX406A34R
SX406A39F
SX406C10F
SX406C10P
SX406C10R
SX406C14F
14-5
14-5
14-5
14-5
14-5
14-5
14-8
14-8
14-8
14-8
SX410C20F
SX410C20P
SX410C20R
SX410C24F
SX410C24P
SX410C24R
SX410C29F
SX410C30F
SX410C30P
SX410C30R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX413C29F
SX413C30F
SX413C30P
SX413C30R
SX413C34F
SX413C34P
SX413C34R
SX413C39F
SX416A10F
SX416A10P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-6
14-6
SX425A14R
SX425A19F
SX425A20F
SX425A20P
SX425A20R
SX425A24F
SX425A24P
SX425A24R
SX425A29F
SX425A30F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
19-20
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product Index
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
SX432A30F
SX432A30P
SX432A30R
SX432A34F
SX432A34P
SX432A34R
SX432A39F
SX432C10F
SX432C10P
SX432C10R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
SX450C29F
SX450C30F
SX450C30P
SX450C30R
SX450C34F
SX450C34P
SX450C34R
SX450C39F
SX502A10F
SX502A10P
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-5
14-5
SX504C34R
SX504C39F
SX506A10F
SX506A10P
SX506A10R
SX506A14F
SX506A14P
SX506A14R
SX506A19F
SX506A20F
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX510A14P
SX510A14R
SX510A19F
SX510A20F
SX510A20P
SX510A20R
SX510A24F
SX510A24P
SX510A24R
SX510A29F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX425C14P
SX425C14R
SX425C19F
SX425C20F
SX425C20P
SX425C20R
SX425C24F
SX425C24P
SX425C24R
SX425C29F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX432C14F
SX432C14P
SX432C14R
SX432C19F
SX432C20F
SX432C20P
SX432C20R
SX432C24F
SX432C24P
SX432C24R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX502A10R
SX502A14F
SX502A14P
SX502A14R
SX502A19F
SX502A20F
SX502A20P
SX502A20R
SX502A24F
SX502A24P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX506A20P
SX506A20R
SX506A24F
SX506A24P
SX506A24R
SX506A29F
SX506A30F
SX506A30P
SX506A30R
SX506A34F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX510A30F
SX510A30P
SX510A30R
SX510A34F
SX510A34P
SX510A34R
SX510A39F
SX510C10F
SX510C10P
SX510C10R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-8
14-8
14-8
SX425C30F
SX425C30P
SX425C30R
SX425C34F
SX425C34P
SX425C34R
SX425C39F
SX430A10F
SX430A10P
SX430A10R
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-7
14-7
14-7
SX432C29F
SX432C30F
SX432C30P
SX432C30R
SX432C34F
SX432C34P
SX432C34R
SX432C39F
SX440A10F
SX440A10F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-7
14-7
SX502A24R
SX502A29F
SX502A30F
SX502A30P
SX502A30R
SX502A34F
SX502A34P
SX502A34R
SX502A39F
SX502C10F
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-8
SX506A34P
SX506A34R
SX506A39F
SX506C10F
SX506C10P
SX506C10R
SX506C14F
SX506C14P
SX506C14R
SX506C19F
14-5
14-5
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX510C14F
SX510C14P
SX510C14R
SX510C19F
SX510C20F
SX510C20P
SX510C20R
SX510C24F
SX510C24P
SX510C24R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX430A14F
SX430A14P
SX430A14R
SX430A19F
SX430A20F
SX430A20P
SX430A20R
SX430A24F
SX430A24P
SX430A24R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX440A10P
SX440A10P
SX440A10R
SX440A10R
SX440A14F
SX440A14F
SX440A14P
SX440A14P
SX440A14R
SX440A14R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX502C10P
SX502C10R
SX502C14F
SX502C14P
SX502C14R
SX502C19F
SX502C20F
SX502C20P
SX502C20R
SX502C24F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX506C20F
SX506C20P
SX506C20R
SX506C24F
SX506C24P
SX506C24R
SX506C29F
SX506C30F
SX506C30P
SX506C30R
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX510C29F
SX510C30F
SX510C30P
SX510C30R
SX510C34F
SX510C34P
SX510C34R
SX510C39F
SX512A10F
SX512A10P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-6
14-6
SX430A29F
SX430A30F
SX430A30P
SX430A30R
SX430A34F
SX430A34P
SX430A34R
SX430A39F
SX430C10F
SX430C10P
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
SX440A19F
SX440A19F
SX440A20F
SX440A20P
SX440A20R
SX440A24F
SX440A24P
SX440A24R
SX440A29F
SX440A30F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX502C24P
SX502C24R
SX502C29F
SX502C30F
SX502C30P
SX502C30R
SX502C34F
SX502C34P
SX502C34R
SX502C39F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX506C34F
SX506C34P
SX506C34R
SX506C39F
SX508A10F
SX508A10P
SX508A10R
SX508A14F
SX508A14P
SX508A14R
14-8
14-8
14-8
14-8
14-5
14-5
14-5
14-5
14-5
14-5
SX512A10R
SX512A14F
SX512A14P
SX512A14R
SX512A19F
SX512A20F
SX512A20P
SX512A20R
SX512A24F
SX512A24P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX430C10R
SX430C14F
SX430C14P
SX430C14R
SX430C19F
SX430C20F
SX430C20P
SX430C20R
SX430C24F
SX430C24P
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX440A30P
SX440A30R
SX440A34F
SX440A34P
SX440A34R
SX440A39F
SX440C10F
SX440C10P
SX440C10R
SX440C14F
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
14-10
SX504A10F
SX504A10P
SX504A10R
SX504A14F
SX504A14P
SX504A14R
SX504A19F
SX504A20F
SX504A20P
SX504A20R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX508A19F
SX508A20F
SX508A20P
SX508A20R
SX508A24F
SX508A24P
SX508A24R
SX508A29F
SX508A30F
SX508A30P
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX512A24R
SX512A29F
SX512A30F
SX512A30P
SX512A30R
SX512A34F
SX512A34P
SX512A34R
SX512A39F
SX512C10F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-9
SX430C24R
SX430C29F
SX430C30F
SX430C30P
SX430C30R
SX430C34F
SX430C34P
SX430C34R
SX430C39F
SX432A10F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-7
SX440C14P
SX440C14R
SX440C19F
SX440C20F
SX440C20P
SX440C20R
SX440C24F
SX440C24P
SX440C24R
SX440C29F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX504A24F
SX504A24P
SX504A24R
SX504A29F
SX504A30F
SX504A30P
SX504A30R
SX504A34F
SX504A34P
SX504A34R
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
14-5
SX508A30R
SX508A34F
SX508A34P
SX508A34R
SX508A39F
SX508C10F
SX508C10P
SX508C10R
SX508C14F
SX508C14P
14-5
14-5
14-5
14-5
14-5
14-8
14-8
14-8
14-8
14-8
SX512C10P
SX512C10R
SX512C14F
SX512C14P
SX512C14R
SX512C19F
SX512C20F
SX512C20P
SX512C20R
SX512C24F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX432A10F
SX432A10F
SX432A10P
SX432A10P
SX432A10P
SX432A10R
SX432A10R
SX432A10R
SX432A14F
SX432A14F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX440C30F
SX440C30P
SX440C30R
SX440C34F
SX440C34P
SX440C34R
SX440C39F
SX450C10F
SX450C10P
SX450C10R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX504A39F
SX504C10F
SX504C10P
SX504C10R
SX504C14F
SX504C14P
SX504C14R
SX504C19F
SX504C20F
SX504C20P
14-5
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX508C14R
SX508C19F
SX508C20F
SX508C20P
SX508C20R
SX508C24F
SX508C24P
SX508C24R
SX508C29F
SX508C30F
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX512C24P
SX512C24R
SX512C29F
SX512C30F
SX512C30P
SX512C30R
SX512C34F
SX512C34P
SX512C34R
SX512C39F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX432A14F
SX432A14P
SX432A14P
SX432A14P
SX432A14R
SX432A14R
SX432A14R
SX432A19F
SX432A19F
SX432A19F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX450C14F
SX450C14P
SX450C14R
SX450C19F
SX450C20F
SX450C20P
SX450C20R
SX450C24F
SX450C24P
SX450C24R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX504C20R
SX504C24F
SX504C24P
SX504C24R
SX504C29F
SX504C30F
SX504C30P
SX504C30R
SX504C34F
SX504C34P
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
14-8
SX508C30P
SX508C30R
SX508C34F
SX508C34P
SX508C34R
SX508C39F
SX510A10F
SX510A10P
SX510A10R
SX510A14F
14-8
14-8
14-8
14-8
14-8
14-8
14-5
14-5
14-5
14-5
SX513A10F
SX513A10P
SX513A10R
SX513A14F
SX513A14P
SX513A14R
SX513A19F
SX513A20F
SX513A20P
SX513A20R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-21
PRODUCT
INDEX
14-7
14-7
14-7
14-7
14-7
14-7
14-9
14-9
14-9
14-9
19
SX425A30P
SX425A30R
SX425A34F
SX425A34P
SX425A34R
SX425A39F
SX425C10F
SX425C10P
SX425C10R
SX425C14F
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
Catalog
Number
Product
Class Page
SX513A24F
SX513A24P
SX513A24R
SX513A29F
SX513A30F
SX513A30P
SX513A30R
SX513A34F
SX513A34P
SX513A34R
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX520A24P
SX520A24R
SX520A24R
SX520A29F
SX520A29F
SX520A30F
SX520A30P
SX520A30R
SX520A34F
SX520A34P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX530A30P
SX530A30R
SX530A34F
SX530A34P
SX530A34R
SX530A39F
SX530C10F
SX530C10P
SX530C10R
SX530C14F
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
14-10
SX540C30F
SX540C30P
SX540C30R
SX540C34F
SX540C34P
SX540C34R
SX540C39F
SX550C10F
SX550C10P
SX550C10R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
TA2J630
TA2J630
TA2J6500
TA2J6500
TA2J6500
TA2J6500
TA2J6500
TA2J6500
TA2JG250
TA2K500
MCCB 6-42
MCCB 6-82
MCCB 6-40
MCCB 6-42
MCCB 6-42
MCCB 6-44
MCCB 6-82
MCCB 6-82
MCCB 6-135
MCCB 4-22
SX513A39F
SX513C10F
SX513C10P
SX513C10R
SX513C14F
SX513C14P
SX513C14R
SX513C19F
SX513C20F
SX513C20P
14-6
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX520A34R
SX520A39F
SX520C10F
SX520C10P
SX520C10R
SX520C14F
SX520C14P
SX520C14R
SX520C19F
SX520C20F
14-6
14-6
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX530C14P
SX530C14R
SX530C19F
SX530C20F
SX530C20P
SX530C20R
SX530C24F
SX530C24P
SX530C24R
SX530C29F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SX550C14F
SX550C14P
SX550C14R
SX550C19F
SX550C20F
SX550C20P
SX550C20R
SX550C24F
SX550C24P
SX550C24R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
TA2K500
TA2K500
TA2K500
TA2K500
TA2K500
TA2MG750
TA2N750
TA2N750
TA3DG02
TA3FG20
MCCB 6-48
MCCB 6-51
MCCB 6-53
MCCB 6-55
MCCB 6-82
MCCB 6-135
MCCB 6-48
MCCB 6-82
6-134
6-134
SX513C20R
SX513C24F
SX513C24P
SX513C24R
SX513C29F
SX513C30F
SX513C30P
SX513C30R
SX513C34F
SX513C34P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX520C20P
SX520C20R
SX520C24F
SX520C24P
SX520C24R
SX520C29F
SX520C30F
SX520C30P
SX520C30R
SX520C34F
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX530C30F
SX530C30P
SX530C30R
SX530C34F
SX530C34P
SX530C34R
SX530C39F
SX532A20F
SX532A20P
SX532A20R
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-7
14-7
14-7
SX550C29F
SX550C30F
SX550C30P
SX550C30R
SX550C34F
SX550C34P
SX550C34R
SX550C39F
SXBAT
SXDRA1
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-12
14-12
TA3H750
TA3K500
TA3K500
TA3K500
TA3K500
TA3K500
TA3K500
TA3MG500
TA3NG750
TA4H500
MCCB 4-22
MCCB 4-22
MCCB 6-48
MCCB 6-51
MCCB 6-53
MCCB 6-55
MCCB 6-82
MCCB 6-135
6-135
MCCB 4-22
SX513C34R
SX513C39F
SX516A10F
SX516A10P
SX516A10R
SX516A14F
SX516A14P
SX516A14R
SX516A19F
SX516A20F
14-9
14-9
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX520C34P
SX520C34R
SX520C39F
SX525A10F
SX525A10P
SX525A10R
SX525A14F
SX525A14P
SX525A14R
SX525A19F
14-9
14-9
14-9
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX532A24F
SX532A24P
SX532A24R
SX532A29F
SX532A30F
SX532A30P
SX532A30R
SX532A34F
SX532A34P
SX532A34R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SXDRA2
SXDRA3
SXDRA4
SXDRA5
SXDRA6
SXDRA7
SXDRC1
SXDRC2
SXDRC3
SXDRC4
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
TA4P750
TA4P750
TA4P750
TA4P750
TA4P750
TA5P600
TA5P600
TA5P600
TA5P600
TA5P600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
SX516A20P
SX516A20R
SX516A24F
SX516A24P
SX516A24R
SX516A29F
SX516A30F
SX516A30P
SX516A30R
SX516A34F
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX525A20F
SX525A20P
SX525A20R
SX525A24F
SX525A24P
SX525A24R
SX525A29F
SX525A30F
SX525A30P
SX525A30R
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX532A39F
SX532C10F
SX532C10P
SX532C10R
SX532C14F
SX532C14P
SX532C14R
SX532C19F
SX532C20F
SX532C20P
14-7
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SXDRC5
SXDRC6
SXDRC7
SXLK
SXSB
SXSH10
SXSH12
SXSH14
SXSH4
SXSH6
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
14-12
TA5P600
TA5P600
TA5P600
TA5P600
TA6DG04
TA6ED06
TA6FD04
TA6FG04
TA6JD20
TA6JG20
MCCB
MCCB
MCCB
MCCB
6-59
6-60
6-62
6-82
6-134
MCCB 6-83
MCCB 6-83
6-134
MCCB 6-83
6-135
SX516A34P
SX516A34R
SX516A39F
SX516C10F
SX516C10P
SX516C10R
SX516C14F
SX516C14P
SX516C14R
SX516C19F
14-6
14-6
14-6
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX525A34F
SX525A34P
SX525A34R
SX525A39F
SX525C10F
SX525C10P
SX525C10R
SX525C14F
SX525C14P
SX525C14R
14-7
14-7
14-7
14-7
14-9
14-9
14-9
14-9
14-9
14-9
SX532C20R
SX532C24F
SX532C24P
SX532C24R
SX532C29F
SX532C30F
SX532C30P
SX532C30R
SX532C34F
SX532C34P
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
SXSH8
SXSK
SXSK
SXSS1
SXSS2
SXSS3
SXSS4
SXTH1
SXTH2
SXTH3
TA6R600
TA6R600
TA6R600
TA6R600
TA6R600
TA6R600
TA6R600STD
TAW1FG350
TBTH
TBTH202R
MCCB 6-120
MCCB 6-135
MCCB 6-59
MCCB 6-60
MCCB 6-62
MCCB 6-82
6-64
MCCB 6-134
BPLU 14-61
BPLU 14-61
SX516C20F
SX516C20P
SX516C20R
SX516C24F
SX516C24P
SX516C24R
SX516C29F
SX516C30F
SX516C30P
SX516C30R
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX525C19F
SX525C20F
SX525C20P
SX525C20R
SX525C24F
SX525C24P
SX525C24R
SX525C29F
SX525C30F
SX525C30P
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
14-9
SX532C34R
SX532C39F
SX540A20F
SX540A20P
SX540A20R
SX540A24F
SX540A24P
SX540A24R
SX540A29F
SX540A30F
14-10
14-10
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SXTH4
SXWH1
SXWH2
SXWH3
SXWH4
T131
T132
T134
T25
T331
14-12
14-12
14-12
14-12
14-12
14-61
14-61
14-61
14-61
14-61
TBTH302F
TBTH306F
TC1DG30
TC1ED6150
TC1FD350
TC1FD350
TC1J6600
TC1J6600
TC1J6600
TC1J6600
BPLU 14-61
BPLU 14-61
6-134
MCCB 6-83
MCCB 6-37
MCCB 6-83
MCCB 6-40
MCCB 6-42
MCCB 6-44
MCCB 6-83
SX516C34F
SX516C34P
SX516C34R
SX516C39F
SX520A10F
SX520A10P
SX520A10R
SX520A14F
SX520A14P
SX520A14R
14-9
14-9
14-9
14-9
14-6
14-6
14-6
14-6
14-6
14-6
SX525C30R
SX525C34F
SX525C34P
SX525C34R
SX525C39F
SX530A10F
SX530A10P
SX530A10R
SX530A14F
SX530A14P
14-9
14-9
14-9
14-9
14-9
14-7
14-7
14-7
14-7
14-7
SX540A30P
SX540A30R
SX540A34F
SX540A34P
SX540A34R
SX540A39F
SX540C10F
SX540C10P
SX540C10R
SX540C14F
14-7
14-7
14-7
14-7
14-7
14-7
14-10
14-10
14-10
14-10
T332
T334
T35
T431
TA12JG04
TA1DG30
TA1E6125
TA1E6125
TA1FD350A
TA1FD350A
BUSW
BUSW
BUSW
BUSW
14-61
14-61
14-61
14-62
6-135
6-134
6-82
6-82
6-37
6-82
TC1JG750
TC1JG750
TC1Q1
TC1Q1
TC1Q1
TC1Q1
TC1Q250
TC2J6500
TC2J6500
TC2J6500
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
SX520A19F
SX520A20F
SX520A20F
SX520A20P
SX520A20P
SX520A20R
SX520A20R
SX520A24F
SX520A24F
SX520A24P
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
14-6
SX530A14R
SX530A19F
SX530A20F
SX530A20P
SX530A20R
SX530A24F
SX530A24P
SX530A24R
SX530A29F
SX530A30F
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
14-7
SX540C14P
SX540C14R
SX540C19F
SX540C20F
SX540C20P
SX540C20R
SX540C24F
SX540C24P
SX540C24R
SX540C29F
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
14-10
TA1JG750
TA1JG750
TA1L6750
TA1L6750
TA1L6750
TA1L6750
TA1L6750
TA1Q1
TA1Q1
TA1Q300
MCCB 6-135
MCCB 6-135
MCCB 6-40
MCCB 6-42
MCCB 6-42
MCCB 6-44
MCCB 6-83
MCCB 6-27
MCCB 6-81
MCCB 6-82
TC2J6500
TC2JG250
TC2JG250
TC2K500
TC2K500
TC2K500
TC2K500
TC2K500
TC3K350
TC3K350
19-22
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
14-12
14-14
14-15
14-12
14-12
14-12
14-12
BUSW 14-12
BUSW 14-12
14-12
BUSW
BUSW
BUSW
BUSW
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-120
6-135
6-59
6-62
6-83
6-120
6-135
6-59
6-59
6-59
6-104
6-135
6-27
6-30
6-81
6-81
6-83
6-40
6-42
6-44
6-83
6-104
6-135
4-22
6-51
6-53
6-55
6-83
4-22
6-51
Product Index
Catalog
Number
Product
Category
Page
TC3K350
TC3K350
TC3K350
TC3MG500
TC3MG500
TC3NG500
TC5R600
TC5R600
TC5R600
TC5R600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-53
6-55
6-83
6-112
6-135
6-135
6-120
6-135
6-59
6-60
TC5R600
TC5R600
TC5R600
TC5R600
TC5R600
TCE2
TCE3
TCF2
TCF3
TCJ2
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
TCJ3
TCL2
TCL3
TCM2
TCM3
TCN2
TCN3
TCW1FG350
TD010
TD010R
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
TD210
TD210R
TD210RS
TD310
TD310R
TD310RS
TD410
TD410R
TD410RS
TD63S2000
BUSW 14-60
BUSW 14-60
14-60
BUSW 14-60
BUSW 14-60
14-60
BUSW 14-62
BUSW 14-62
14-62
6-72
TD63S2500
TD63S3200
TDF3
TDF4
TDH3
TDH4
TFAK32
TFAK32
TFAK32
TFAK35
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
U01ED62AB
U01ED62B
U01FD60
U01JLD6
U01JLD6
U01JLD6
U01JLD6
U01JLD62A
U01JLD62A
U01JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-36
6-36
6-39
6-43
6-43
6-47
6-50
6-43
6-47
6-50
U06JLD64AA
U06JLD64AA
U06MN6
U06MN6
U06MN6
U06MN6
U07MN6
U07MN6
U07MN6
U07MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
U14JLD6
U14JLD6
U14JLD62A
U14JLD62A
U14JLD62A
U14JLD62AA
U14JLD62AA
U14JLD62AA
U15MN6
U15MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-43
6-47
6-50
6-43
6-47
6-50
6-58
6-61
6-62
6-62
6-62
6-62
6-83
6-91
6-91
6-91
6-91
6-91
TLK34Q
TLK35Q
TLK36Q
TLK37Q
TLK38Q
TLK39Q
TMK606
TMK606
TMK610
TMK610C
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
HDSS
HDSS
HDSS
HDSS
7-19
7-19
7-19
7-19
7-19
7-19
4-11
4-11
4-11
4-11
U01JLD62AA
U01JLD62AA
U01JLD62AA
U01MN6
U01MN6
U01MN6
U01MN6
U01MN64A
U01MN64A
U01MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-43
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
6-61
U07MN64A
U07MN64A
U07MN64A
U07MN64A
U07MN64AA
U07MN64AA
U07MN64AA
U07MN64AA
U08FD60
U08JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
U15MN6
U15MN64A
U15MN64A
U15MN64A
U15MN64A
U15MN64AA
U15MN64AA
U15MN64AA
U15MN64AA
U16FD60
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-63
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-91
6-91
6-91
6-91
6-91
6-91
6-91
6-134
14-60
14-60
TMK620
TMK620C
TMKJ
TMKJ3
TNKD
TNKD3
TNKE3
TNKE3
TNKE4
TNKF
HDSS 4-11
HDSS 4-11
MCCB 6-135
6-135
MCCB 6-134
MCCB 6-134
MCCB 6-32
MCCB 6-81
6-81
MCCB 6-134
U01MN64A
U01MN64AA
U01MN64AA
U01MN64AA
U01MN64AA
U02FD60
U02JLD6
U02JLD6
U02JLD62A
U02JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-63
6-54
6-58
6-61
6-63
6-39
6-47
6-50
6-43
6-47
U08JLD6
U08JLD6
U09MN6
U09MN6
U09MN6
U09MN6
U09MN64A
U09MN64A
U09MN64A
U09MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
U16JLD6
U16JLD6
U16JLD62AA
U16JLD62AA
U16JLD62AA
U16JLD64A
U16JLD64A
U16JLD64A
UE145
UE145
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-47
6-50
6-43
6-47
6-50
6-43
6-47
6-50
14-53
14-53
TNKF3
TNKG3
TNKG3
TNKL
TNKL3
TNKM
TNKM3
TNKP
TNKP
TNKP3
MCCB 6-134
MCCB 6-30
MCCB 6-81
MCCB 6-135
MCCB 6-135
6-135
MCCB 6-135
MCCB 6-135
MCCB 6-135
MCCB 6-135
U02JLD62A
U02JLD62AA
U02JLD62AA
U02JLD62AA
U02MN6
U02MN6
U02MN6
U02MN6
U02MN64A
U02MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-50
6-43
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
U09MN64AA
U09MN64AA
U09MN64AA
U09MN64AA
U10FD60
U10JLD6
U10JLD6
U10JLD6
U10JLD62A
U10JLD62A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-39
6-43
6-47
6-50
6-43
6-47
UE145
UE145
UE145
UE145
UE145
UE145
UE145
UE145
UE145
UE145
14-53
14-53
14-53
14-53
14-53
14-55
14-55
14-55
14-55
14-55
BUSW
BUSW
BUSW
BUSW
HDSS
HDSS
HDSS
HDSS
6-72
6-72
14-60
14-62
14-60
14-62
14-57
14-57
4-21
14-57
TNKP3
TPSA9040
TPSASA1
TPSCOAX
TPSESA3
TPSTEL
TPTH
TR1311
TR1312
TR3311
MCCB 6-135
RESI 1-33
RESI 1-33
RESI 1-34
RESI 1-33
RESI 1-34
BPLU 14-61
14-61
BUSW 14-61
BUSW 14-61
U02MN64A
U02MN64A
U02MN64AA
U02MN64AA
U02MN64AA
U02MN64AA
U03FD60
U03JLD6
U03JLD6
U03JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
6-43
6-47
U10JLD62A
U10JLD62AA
U10JLD62AA
U10JLD62AA
U11MN6
U11MN6
U11MN6
U11MN6
U11MN64A
U11MN64A
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-50
6-43
6-47
6-50
6-54
6-58
6-61
6-63
6-54
6-58
UE145
UE145
UE145
UE145
UE145
UE145
UE145
UE155
UE155
UE155
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-53
14-53
14-53
TFAK35
TFAK35
TFAK42
TFAK42
TFAK42
TFAK45
TFAK45
TFAK45
TFAK52
TFAK52
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
14-57
4-21
14-57
14-57
4-21
14-57
14-57
4-21
12-23
14-57
TR3312
TRB23
TRB23
TRH31
TRH31
TS31
TS31CABLE
TSCFTM
TSCFTM
TSCLTM
BUSW
BUSW
BUSW
BUSW
BUSW
MCCB
MCCB
MCCB
MCCB
MCCB
14-61
14-60
14-62
14-60
14-62
6-79
6-79
6-136
6-136
6-137
U03JLD6
U03JLD62A
U03JLD62A
U03JLD62A
U03JLD62AA
U03JLD62AA
U03JLD62AA
U03MN6
U03MN6
U03MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-50
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-54
6-58
U11MN64A
U11MN64A
U11MN64AA
U11MN64AA
U11MN64AA
U11MN64AA
U12FD60
U12JLD6
U12JLD6
U12JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
6-47
6-50
UE155
UE155
UE155
UE155
UE155
UE155
UE155
UE175
UE175
UE175
14-53
14-53
14-53
14-55
14-55
14-55
14-55
14-53
14-53
14-53
TFAK52
TFAK52
TFAK55
TFAK55
TFAK55
TFAK55
TFAK62
TFAK62
TFAK62
TFAK62
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
14-57
4-21
12-23
14-57
14-57
4-21
12-23
14-57
14-57
4-21
TSCLTM
TSCMTM
TSCPET
TSCPET
TSCPET
TSCPET
TSCPET
TSCPET
TSCPET
TSLF3
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-137
6-137
6-136
6-136
6-137
6-137
6-137
6-137
6-137
6-132
U03MN6
U03MN6
U03MN64A
U03MN64A
U03MN64A
U03MN64A
U03MN64AA
U03MN64AA
U03MN64AA
U03MN64AA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
U12JLD62A
U12JLD62A
U12JLD62A
U12JLD62AA
U12JLD62AA
U12JLD62AA
U13FD60
U13JLD6
U13JLD6
U13JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-43
6-47
6-50
6-43
6-47
6-50
6-39
6-43
6-47
6-50
UE175
UE175
UE175
UE195
UE195
UE195
UE195
UE275
UE275
UE275
14-53
14-53
14-55
14-53
14-55
14-55
14-55
14-53
14-53
14-55
TFAK65
TFAK65
TFAK65
TFAK65
TFAK72
TFAK72
TFAK75
TFAK75
TFAK75
TFAK82
HDSS 12-23
HDSS 14-57
HDSS 14-57
HDSS 4-21
HDSS 3-17
HDSS 4-22
HDSS 3-17
HDSS 4-21
HDSS 4-22
HDSS 3-17
TSLF3
TSLL3
TSLL3
TSLM3
TSLP3
TSLP3
TSSF3
TSSF3
TSSG3A
TSSL3
MCCB 6-132
6-133
6-133
6-133
MCCB 6-133
MCCB 6-133
6-132
6-132
6-86
6-133
U04MN6
U04MN6
U04MN6
U04MN6
U04MN64A
U04MN64A
U04MN64A
U04MN64A
U04MN64AA
U04MN64AA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-54
6-58
U13JLD62A
U13JLD62A
U13JLD62A
U13JLD62AA
U13JLD62AA
U13JLD62AA
U13MN6
U13MN6
U13MN6
U13MN6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-43
6-47
6-50
6-43
6-47
6-50
6-54
6-58
6-61
6-63
UE275
UE295
UE295
UE295
UE295
UE295
UE295
UE295
UE295
UE295
14-55
14-53
14-53
14-53
14-53
14-55
14-55
14-55
14-55
14-55
TFAK82
TFP223
TFP224
TFP323
TFP324
TFP363
TFP364
THEL
THEL
THEM
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
TSSL3
TSSM3
TSSP3
TSSP3
TW1DG20
TW1FG350
TW1JG600
U01ED60
U01ED62A
U01ED62AA
6-133
6-133
MCCB 6-133
MCCB 6-133
MCCB 6-134
6-134
6-135
MCCB 6-36
MCCB 6-36
MCCB 6-36
U04MN64AA
U04MN64AA
U06FD60
U06JLD6
U06JLD6
U06JLD6
U06JLD64A
U06JLD64A
U06JLD64A
U06JLD64AA
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-61
6-63
6-39
6-43
6-47
6-50
6-43
6-47
6-50
6-43
U13MN64A
U13MN64A
U13MN64A
U13MN64A
U13MN64AA
U13MN64AA
U13MN64AA
U13MN64AA
U14FD60
U14JLD6
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-54
6-58
6-61
6-63
6-54
6-58
6-61
6-63
6-39
6-43
UE295
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
14-55
14-53
14-53
14-53
14-53
14-53
14-53
14-53
14-53
14-53
4-22
4-24
4-24
4-24
4-24
4-24
4-24
6-139
6-139
MCCB 6-139
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-23
PRODUCT
INDEX
MCCB 6-139
MCCB 6-139
XFMR 7-19
XFMR 7-19
XFMR 7-19
XFMR 7-19
XFMR 7-19
XFMR 7-19
XFMR 7-19
XFMR 7-19
19
THEP
THEP
TLK11Q
TLK12Q
TLK13Q
TLK14Q
TLK15Q
TLK31Q
TLK32Q
TLK33Q
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
14-53
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
UFS179
UFS179
UFS179
UFS279
UFS279
UFS279
UFS279
UFS279
UFS279
UFS279
14-55
14-55
14-55
14-53
14-53
14-53
14-53
14-53
14-53
14-55
UVREE250D
UVREM60
UVREM60
UVREN120
UVREN120
UVRER240
UVRER240
UVREU480
UVREU480
UVREV600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
UF145
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
UFS279
UFS279
UFS279
UFS279
UFS279
UFS279
UFS279
UH145
UH145
UH145
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-53
14-53
14-53
UVREV600
UVRLA12DC
UVRLA12DC
UVRLA12DC
UVRLA12DC
UVRLB24DC
UVRLB24DC
UVRLB24DC
UVRLB24DC
UVRLC48DC
UF145
UF155
UF155
UF155
UF155
UF155
UF155
UF155
UF155
UF155
14-55
14-53
14-53
14-53
14-53
14-55
14-55
14-55
14-55
14-55
UH145
UH145
UH145
UH145
UH145
UH145
UH145
UH145
UH145
UH145
14-53
14-53
14-53
14-53
14-55
14-55
14-55
14-55
14-55
14-55
UF175
UF175
UF175
UF175
UF175
UF195
UF195
UF195
UF195
UF275
14-53
14-53
14-53
14-53
14-55
14-53
14-53
14-55
14-55
14-53
UH145
UH145
UH145
UH145
UH145
UH145
UH155
UH155
UH155
UH155
UF275
UF275
UF275
UF275
UF275
UF295
UF295
UF295
UF295
UF295
14-53
14-55
14-55
14-55
14-55
14-53
14-53
14-53
14-53
14-55
UF295
UF295
UF295
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
6-33
6-25
6-33
6-25
6-33
6-25
6-33
6-25
6-33
6-25
UVRPS277
UVRPS277
UVRPS277
UVRPT415
UVRPT415
UVRPT415
UVRPU480
UVRPU480
UVRPU480
UVRPV600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-33
6-103
6-107
6-111
6-99
6-103
6-107
6-111
6-99
MCCB 6-103
UVRPV600
UVRPV600
UX001WL
UX005B
V2A2211LR
V2A3211
V2B2211LR
V2B2212LR
V2B2222LR
V2B3211
MCCB 6-119
MCCB 6-122
2-85
RESG 2-85
VBSS 4-18
VBSS 4-18
VBSS 4-18
VBSS 4-18
VBSS 4-18
VBSS 4-18
VB357BL
VB358BL
VB610
VB6150
VB6150
VB6150
VB657
VB657
VB657
VB657
VBSS 4-20
VBSS 4-20
SWBD 12-26
SWBD 12-26
SWBD 4-21
SWBD 4-21
SWBD 12-26
SWBD 4-21
SWBD 4-21
SWBD 4-21
UVRLC48DC
UVRLC48DC
UVRLC48DC
UVRLD125DC
UVRLD125DC
UVRLD125DC
UVRLD125DC
UVRLE250
UVRLE250DC
UVRLE250DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
MCCB 6-107
MCCB 6-111
V2B3211R
V2B3212
V2B3212R
V2B3222
V2B3222R
V2E2203LR
V2E2204LR
V2E3203
V2F3204
V2F3204MS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-18
4-18
4-18
4-18
4-18
4-18
4-18
4-18
4-18
4-18
VB657
VB657
VB657
VB671
VB671
VB7F025
VB7F050
VB7F075
VBFS321
VBFS321F
SWBD 4-21
SWBD 4-21
SWBD 4-21
SWBD 12-26
SWBD 4-21
10-73
10-73
10-73
HDSS
4-7
HDSS
4-7
14-55
14-55
14-55
14-55
14-55
14-55
14-53
14-53
14-53
14-53
UVRLE250DC
UVRLG60DC
UVRLG60DC
UVRLG60DC
UVRLG60DC
UVRLN120
UVRLN120
UVRLN120
UVRLN120
UVRLP208
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-99
6-103
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
V7A2211__
V7A3211
V7B2211__
V7B2211__R
V7B2212LR
V7B2212LRR
V7B2222__
V7B2222__R
V7B3211
V7B3211R
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-19
VBFS322
VBFS322F
VBFS361
VBFS361F
VBFS362
VBFS362F
VBFS363
VBFS363F
VBFS364
VBFS364F
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
UH155
UH155
UH155
UH155
UH155
UH155
UH175
UH175
UH175
UH175
14-53
14-53
14-55
14-55
14-55
14-55
14-53
14-53
14-53
14-53
UVRLP208
UVRLP208
UVRLP208
UVRLR240
UVRLR240
UVRLR240
UVRLR240
UVRLS277
UVRLS277
UVRLS277
MCCB 6-107
MCCB 6-111
MCCB 6-99
6-103
6-107
6-111
6-99
MCCB 6-103
MCCB 6-107
MCCB 6-111
V7B3212
V7B3212R
V7B3222
V7B3222R
V7E2203LR
V7E2204__
V7E2204MS
V7E2223LR
V7E2233__
V7E2603LR
VBSS
VBSS
VBSS
VBSS
VBSS
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-19
4-20
VBFS365
VBFS366
VBH1
VBH14X
VBH2
VBHM1
VBLK1
VBLK2
VBLK3
VBLK4
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
14-55
14-55
14-55
14-53
14-53
14-53
14-53
14-53
14-53
14-53
UH175
UH175
UH195
UH195
UH195
UH195
UH275
UH275
UH275
UH275
14-55
14-55
14-53
14-53
14-55
14-55
14-53
14-53
14-55
14-55
UVRLS277
UVRLT415
UVRLT415
UVRLT415
UVRLT415
UVRLU480
UVRLU480
UVRLU480
UVRLU480
UVRLV600
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-99
6-103
6-107
6-111
6-99
6-103
6-107
6-111
6-99
6-103
V7E2611LR
V7E2612LR
V7E2622LR
V7E3202
V7E3203
V7E3203MS
V7E3223
V7E3233
V7E3233R
V7E3601
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-20
4-20
4-20
4-19
4-19
4-19
4-19
4-19
4-19
4-20
VBNFS361
VBNFS361F
VBNFS362
VBNFS362F
VBNFS363
VBNFS363F
VBNFS364
VBNFS364F
VBNFS365
VBNFS366
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
4-7
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
14-53
14-53
14-53
14-53
14-53
14-53
14-53
14-55
14-55
14-55
UH275
UH275
UH295
UH295
UH295
UH295
UH295
UH295
UH295
UH295
14-55
14-55
14-53
14-53
14-53
14-53
14-55
14-55
14-55
14-55
UVRLV600
UVRLV600
UVRLV600
UVRPA12DC
UVRPA12DC
UVRPA12DC
UVRPB24DC
UVRPB24DC
UVRPB24DC
UVRPC48DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-107
6-111
6-99
6-115
6-119
6-122
6-115
6-119
6-122
6-115
V7E3602
V7E3603
V7E3603MS
V7E3611
V7E3611R
V7E3612
V7E3622
V7E3622R
V7E3623
V7E3633
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-20
4-20
4-20
4-20
4-20
4-20
4-20
4-20
4-20
4-20
VBWK1
VBWK2
VBWK3
VF357TL
VF358TL
VH9499
VMS325B
VMS325T
VMS326B
VMS326T
HDSS
HDSS
HDSS
VBSS
VBSS
MCCB
VBSS
VBSS
VBSS
VBSS
4-8
4-8
4-8
4-20
4-20
6-88
4-19
4-19
4-19
4-19
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
UFS145
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
14-55
UJ100
UK1000TA
UK350TA
UK600TA
UPAPELTK
UPAPELTK
UPAPELTK
UPAPELTK
UPAPELTK
UPAPELTK
BUSW 14-51
RESG 2-26
RESG 2-26
RESG 2-26
6-138
6-138
6-139
6-139
6-139
6-139
UVRPC48DC
UVRPC48DC
UVRPD125DC
UVRPD125DC
UVRPD125DC
UVRPE250DC
UVRPE250DC
UVRPE250DC
UVRPG60DC
UVRPG60DC
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-119
6-122
6-115
6-119
6-122
6-115
6-119
6-122
6-115
6-119
V7E3633R
V7F2604LR
V7F3204
V7F3204MS
V7F3244R
V7F3604
V7F3604MS
V7F3604R
V7F3644
V7F3644J
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-20
4-20
4-19
4-19
4-19
4-20
4-20
4-20
4-19
4-20
VMS365B
VMS365T
VMS366B
VMS366T
W01FD64
W0202MB1100CU
W0202MB1200CU
W0202ML1200CU
W0204ML1060
W0204ML1060
VBSS
VBSS
VBSS
VBSS
MCCB
RESI
RESI
RESI
RESI
RESI
4-20
4-20
4-20
4-20
6-39
1-10
1-10
1-10
1-10
5-10
UFS145
UFS145
UFS145
UFS179
UFS179
UFS179
UFS179
UFS179
UFS179
UFS179
14-55
14-55
14-55
14-53
14-53
14-53
14-53
14-53
14-53
14-55
UPAPELTK
UPGR314G
UVREA12AD
UVREB24AD
UVREB24AD
UVREC48D
UVREC48D
UVRED125D
UVRED125D
UVREE250D
6-139
BPLU 14-58
6-25
MCCB 6-25
MCCB 6-33
MCCB 6-25
MCCB 6-33
MCCB 6-25
MCCB 6-33
MCCB 6-25
UVRPG60DC
UVRPN120
UVRPN120
UVRPN120
UVRPP208
UVRPP208
UVRPP208
UVRPR240
UVRPR240
UVRPR240
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-122
6-115
6-119
6-122
6-115
6-119
6-122
6-115
6-119
6-122
V7H2205LR
V7H2205MS
V7H2206LR
V7H2206MS
V7H2605MR
V7H3205
V7H3205750
V7H3205MS
V7H3206
V7H3206MS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
4-19
4-19
4-19
4-19
4-20
4-19
4-19
4-19
4-19
4-19
W0204ML1125CU
W02FD64
W0303ML3100
W0303ML3100
W03FD64
W0404MB1200CT
W0404MB1200CT
W0406ML1225CU
W0406ML1225CU
W0406ML1225CU
RESI
MCCB
RESI
RESI
MCCB
RESI
RESI
RESI
RESI
RESI
1-10
6-39
1-10
5-10
6-39
1-13
1-9
1-10
1-9
5-10
19-24
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
VBSS
6-115
6-119
6-122
6-115
6-119
6-122
6-115
6-119
6-122
6-115
V7H3605
V7H3605750
V7H3605MS
V7H3606
V7H3606MS
VB2F025
VB2F050
VB2F075
VB2F100
VB2F100
VBSS
VBSS
VBSS
VBSS
VBSS
4-20
4-20
4-20
4-20
4-20
10-73
10-73
10-73
10-73
10-73
Product Index
Catalog
Number
Product
Category
Page
Catalog
Number
W0408L1125SPA50
W0408L1125SPA50
W0408L1125SPA60
W0408L1125SPA60
W0408ML1125
W0606ML1400CU
W06FD64
W0816B1200CT
W0816B1200CT
W0816L1200CT
RESI
RESI
RESI
RESI
RESI
RESI
MCCB
RESI
RESI
RESI
1-13
1-9
1-13
1-9
1-9
1-12
6-39
1-13
1-7
1-13
W4040L1200CU
W410190
W411239
W411239
W411239
W411239
W411239
W411239
W4242B1225CU
W4242B3200CU
W0816L1200CT
W0816ML1125CU
W10FD64
W1212L1125CU
W1224B10060GC
W1224B1100CU
W1224L1125CU
W1224L1200CU
W1224L1225CU
W1224L3125CU
RESI
RESI
MCCB
RESI
RESI
RESI
RESI
RESI
RESI
RESI
1-7
1-9
6-39
1-7
1-13
1-7
1-7
1-7
1-7
1-11
W1224L3200CU
W12FD64
W13FD64
W14FD64
W1624B1100CU
W1624L1125CU
W16FD64
W1836L3150CU
W1MM1225U
W1MM1225USS
RESI
MCCB
MCCB
MCCB
RESI
RESI
MCCB
RESI
RESG
RESG
W1MM1400
W1MM1400B
W1MM2225U
W1MM2225USS
W1MM2400
W1MM3225U
W1MM3225USS
W1MM4225U
W2020B1100CU
W2030L1150CU
Product
Category Page
Product
Category Page
Catalog
Number
Product
Category Page
SWBD
HDSS
HDSS
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
HDSS
14-57
14-57
14-57
14-57
14-57
4-21
14-57
14-57
4-21
5-11
WMC12
WMC124
WMC124BF
WMC12BF
WMC14
WMC144
WMC144BF
WMC14BF
WMC16
WMC164
RESG
RESG
RESG
RESG
RESG
RESG
W4242B3225CU
W4242L1225CU
W4242L3225CU
W4242MB1400CU
W4242MB3400CU
W4242ML1400CU
W4242ML3400CU
W43000
W43002
W43099
1-11
1-7
1-11
1-12
1-12
1-12
1-12
4-21
4-21
BPLU 14-60
W60992
W60992
W60992
W60992
W60992
W60992
W60992
W60993
W60993
W60993
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
5-13
5-4
5-7
5-7
5-7
5-9
6-41
5-11
5-12
5-13
1-11
6-39
6-39
6-39
1-7
1-7
6-39
1-11
2-47
2-51
W43099
W43100
W43100
W43101
W43101
W43771
W43771
W47185
W47185
W48762
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
14-62
14-60
14-62
14-60
14-62
14-60
14-62
14-56
14-58
4-21
W60993
W60993
W60993
W60993
W60993
W60993
W62890
W62891
W63231
W63232
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
BPLU
BPLU
BPLU
BPLU
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESI
RESI
2-47
2-50
2-47
2-51
2-47
2-47
2-51
2-47
1-7
1-7
W48763
W48764
W48765
W49813
W49813
W49813
W49813
W49813
W49814
W49814
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
4-21
4-21
4-21
12-23
14-57
14-57
14-57
4-21
12-23
14-57
W63233
W63234
W63234
W63238
W63238
W63553
W63554
W63623
W63623
W63623
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
HDSS
HDSS
HDSS
W2040B1200CU
W2040L1200CU
W2424L1125CU
W2442B3150CU
W2442L3150CU
W2442L3200CU
W2MM1225U
W2MM1225USS
W2MM1400AB
W2MM1400BAB
RESI
RESI
RESI
RESI
RESI
RESI
RESG
RESG
RESG
RESG
1-7
1-7
1-7
1-11
1-11
1-11
2-48
2-51
2-48
2-50
W49814
W49815
W49815
W49815
W49816
W49816
W49816
W49818
W49818
W49819
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
4-21
12-23
14-57
4-21
12-23
14-57
4-21
14-57
4-21
14-57
W63623
W63623
W63623
W63623
W63623
W63623
W63623
W63623
W63623
W63810
W2MM2400AB
W2MM2AB225U
W2MM2AB225USS
W2MM2BC225U
W2MM2BC225USS
W2MM2CA225U
W2MM2CA225USS
W2MM3225U
W2MM3225USS
W2MM4AB225U
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-48
2-48
2-51
2-48
2-51
2-48
2-51
2-48
2-51
2-48
W49819
W49827
W49827
W49828
W49828
W49829
W49830
W49830
W49832
W49832
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
4-21
14-57
4-21
14-57
4-21
4-21
14-57
4-21
14-57
4-21
W68101
W68113
W73534
WB2150B
WB2200B
WB2225
WB2225
WB2225
WB3100
WB3100
W2MM4BC225U
W2MM4CA225U
W3030MB1400CU
W3030ML1400CU
W3040B1200CP
W3040B1200CU
W3040L1125CU
W3040L1200CP
W3040L1200CU
W3042B3200CU
RESG
RESG
RESI
RESI
RESI
RESI
RESI
RESI
RESI
RESI
2-48
2-48
1-12
1-12
1-8
1-7
1-7
1-8
1-7
1-11
W53045
W53045
W53045
W53045
W55365
W55365
W55365
W55365
W55365
W55365
HDSS
HDSS
HDSS
HDSS
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
5-11
5-12
5-13
5-9
14-57
14-57
14-57
14-57
4-21
4-21
WB3100
WB3225
WB3225
WB3225
WBMEFM
WBMFDP
WBMFDP
WBMFFM
WBMFFM
WBMLDP
W3042L3200CU
W37940
W37940
W3MM1
W3MM1200U
W3MM1225USS
W3MM1400
W3MM1400B
W3MM2
W3MM2200U
RESI 1-11
BPLU 14-57
BPLU 14-58
RESG 2-49
RESG 2-49
RESG 2-51
RESG 2-49
RESG 2-50
RESG 2-49
RESG 2-49
W55366
W55366
W55366
W55366
W55366
W55366
W55367
W55367
W55367
W55367
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
14-57
14-57
14-57
14-57
4-21
4-21
14-57
14-57
14-57
14-57
W3MM2225USS
W3MM2400
W3MM3
W3MM3200U
W3MM3225USS
W3MM4
W3MM4200U
W4040B1200CP
W4040B1200CU
W4040L1200CP
RESG
W55367
W55367
W55368
W55368
W55368
W55368
W55368
W55368
W56623
W56626
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
4-21
4-21
14-57
14-57
14-57
14-57
4-21
4-21
4-21
14-57
2-51
2-49
2-49
2-49
2-51
2-49
2-49
1-8
1-7
1-8
RESI
RESI
RESI
RESI
RESI
RESI
RESI
Product
Category Page
RESG
RESG
RESG
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
WMM5URNJ
WMM64U
WMM64UR
WMM64URNJ
WMM6U
WMM6UR
WMM6URNJ
WMMB11200
WMMB1400
WMMB1800
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-45
2-44
2-45
2-45
2-44
2-45
2-45
2-43
2-43
2-43
WMC164BF
WMC16BF
WMC4
WMC44
WMC44BF
WMC4BF
WMC6
WMC64
WMC64BF
WMC6BF
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
WMMB31200
WMMB3400
WMMB3800
WMMBK
WMP024U
WMP02U
WMS124U
WMS12U
WMS44U
WMS44UPBU
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-43
2-43
2-43
2-81
2-42
2-42
2-42
2-42
2-42
2-42
5-5
5-7
5-7
5-9
5-9
6-45
14-56
14-56
14-57
14-57
WMC7
WMC74
WMC74BF
WMC7BF
WMC8
WMC84
WMC84BF
WMC8BF
WMEP
WMEX1U
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-41
2-81
2-81
WMS4U
WMS4UPBU
WMS64U
WMS64UPBU
WMS6U
WMS6UPBU
WMS84U
WMS84UPBU
WMS8U
WMS8UPBU
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
2-42
14-57
14-57
14-57
14-57
14-57
14-57
14-57
5-11
5-13
5-5
WMEX4U
WMM2200U
WMM2200UR
WMM22URNJ
WMM24AB200U
WMM24AB2URNJ
WMM2U
WMM2UR
WMM2URNJ
WMM3200U
RESG
RESG
RESG
RESI
RESG
RESI
RESG
RESG
RESG
RESG
2-81
2-44
2-45
2-45
2-44
2-45
2-44
2-45
2-45
2-44
WMTB124U
WMTB12U
WMTB164U
WMTB16U
WMTB84U
WMTB8U
WN2060
WN2060GFCI
WN2060PL
WN2060PLX
RESG
RESG
RESG
RESG
RESG
RESG
RESI
RESI
RESI
RESI
2-43
2-43
2-43
2-43
2-43
2-43
1-15
1-15
1-15
1-15
HDSS
5-6
HDSS
5-7
HDSS
5-7
HDSS
5-9
HDSS
5-9
HDSS 6-49
HDSS 6-51
HDSS 6-53
HDSS 6-55
BPLU 14-56
WMM3200UR
WMM32URNJ
WMM34200U
WMM34200UR
WMM342URNJ
WMM34U
WMM34UR
WMM34URNJ
WMM3U
WMM3UR
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-45
2-45
2-44
2-45
2-45
2-44
2-45
2-45
2-44
2-45
WNAS2060
WNAS2060GFCI
WNAS2060PL
WP32
WP32
WP32
WP32
WP32
WP32
WP38
RESI
RESI
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
1-15
1-15
1-15
10-10
10-10
10-10
10-10
10-10
10-10
10-10
BPLU 14-56
BPLU 14-49
BPLU 14-57
RESI 1-10
RESI 1-10
RESI 1-10
RESI 5-11
RESI 6-28
RESI 1-10
RESI 5-10
WMM3URNJ
WMM4200U
WMM4200UR
WMM42URNJ
WMM44AB200U
WMM44AB200UR
WMM44AB2URNJ
WMM44ABU
WMM44ABUR
WMM44ABURNJ
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-45
2-44
2-45
2-45
2-44
2-45
2-45
2-44
2-45
2-45
WP38
WP38
WP38
WP38
WP38
WP44
WP44
WP44
WP44
WP44
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
6-27
1-10
5-11
6-28
6-87
6-136
6-136
6-136
6-136
6-137
WMM44BC200U
WMM44BC200UR
WMM44BC2URNJ
WMM44BCU
WMM44BCUR
WMM44BCURNJ
WMM44CA200U
WMM44CA200UR
WMM44CA2URNJ
WMM44CAU
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-44
2-45
2-45
2-44
2-45
2-45
2-44
2-45
2-45
2-44
WP44
WP56
WP56
WP56
WP56
WP56
WP56
WP62
WP62
WP62
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
WBMLDP
WBMLFM
WBMLFM
WBMMDP
WBMMFM
WBMPDP
WBMPDP
WBMPFM
WBMPFM
WF1
6-137
6-137
6-137
6-137
6-137
6-137
6-137
6-137
6-137
BPLU 14-49
WMM44CAUR
WMM44CAURNJ
WMM4U
WMM4UR
WMM4URNJ
WMM54AB200U
WMM54AB2URNJ
WMM54ABU
WMM54ABUR
WMM54ABURNJ
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-45
2-45
2-44
2-45
2-45
2-44
2-45
2-44
2-45
2-45
WP62
WP62
WP62
WP68
WP68
WP68
WP68
WP68
WP68
WPB224
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
SWBD
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
10-10
12-20
WF2030
WF2030GFCI
WF2030PL
WF2060
WF2060GFCI
WF2060PL
WMC10
WMC104
WMC104BF
WMC10BF
RESI
RESI
RESI
RESI
RESI
RESI
RESG
RESG
RESG
RESG
WMM54BC200U
WMM54BC2URNJ
WMM54BCUR
WMM54BCURNJ
WMM54CA200U
WMM54CA2URNJ
WMM54CAUR
WMM54CAURNJ
WMM5U
WMM5UR
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
RESG
2-44
2-45
2-45
2-45
2-44
2-45
2-45
2-45
2-44
2-45
WPB226
WPB228
WPB424
WPB426
WPB428
WPB444
WPB446
WPB448
WPF224
WPF226
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
12-20
12-20
12-20
12-20
12-20
12-20
12-20
12-20
12-21
12-21
RESI
RESI
RESI
RESI
1-15
1-15
1-15
1-15
1-15
1-15
2-41
2-41
2-41
2-41
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
19-25
PRODUCT
INDEX
W56626
W56627
W56627
W56628
W56628
W56628
W56629
W56629
W56629
W60992
Catalog
Number
19
1-7
3-17
5-11
5-13
5-5
5-6
5-7
5-9
1-7
1-11
RESG
RESG
RESG
RESG
RESG
RESI
RESI
RESI
RESI
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
RESI
RESI
Catalog
Number
Product Index
PRODUCT
INDEX
19
Catalog
Number
Product
Category
Page
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
Catalog
Number
WPF424
WPF426
WPF444
WPF446
WPUG14
WPUG26
WSC150C
WSC250C
WSC350C
WSN251CR
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
RESG
RESG
RESG
RESG
12-21
12-21
12-21
12-21
12-23
12-23
2-6
2-6
2-6
2-6
X4003ETVB
X4003ETVBG
X4003ETVBGIG
X4003ETVBIG
X4003FE
X4003FEG
X4003FEGIG
X4003FEIG
X4003G
X4003GIG
14-49
14-49
14-49
14-49
14-48
14-48
14-48
14-48
14-48
14-48
XC1004IG
XC1004L
XC1004LG
XC1004LGIG
XC1004LIG
XE100
XE100
XE100
XE100
XE100
BUSW 14-48
14-49
14-49
14-49
14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
37
37
37
40
40
42
42
43
45
45
WSN351CR
WSN451CR
WSX019
X103PB
X103PBG
X103PBGIG
X103PBIG
X104PB
X104PBG
X104PBGIG
RESG
RESG
BUSW
BUSW
BUSW
BUSW
2-6
2-6
2-10
14-49
14-49
14-49
14-49
14-49
14-49
14-49
X4003IG
X4003L
X4003LG
X4003LGIG
X4003LIG
X4003M
X4003MG
X4003MGIG
X4003MIG
X4004
14-48
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-48
XE100
XE100
XE100
XE200
XE200
XE200
XE200
XE200
XE200
XE200
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
48
48
49
49
49
49
49
49
49
49
X104PBIG
X2003
X20032
X20032G
X20032GIG
X20032IG
X20035
X20035G
X20035GIG
X20035IG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-49
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
X40042
X40042G
X40042GIG
X40042IG
X40045
X40045G
X40045GIG
X40045IG
X4004ETVB
X4004ETVBG
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-49
14-49
XE200
XE400
XE400
XE400
XE400
XE400
XE400
XE400
XE400
XEC3100
BUSW 14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
14-49
BPLU 14-56
49
49
49
49
49
49
49
49
75
75
X2003ETVB
X2003ETVBG
X2003ETVBGIG
X2003ETVBIG
X2003FE
X2003FEG
X2003FEGIG
X2003FEIG
X2003G
X2003GIG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-49
14-49
14-49
14-49
14-48
14-48
14-48
14-48
14-48
14-48
X4004ETVBGIG
X4004ETVBIG
X4004FE
X4004FEG
X4004FEGIG
X4004FEIG
X4004G
X4004GIG
X4004IG
X4004L
14-49
14-49
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-49
XEC3100IG
XEC4100
XEC4100IG
XEQH
XH2
XLEC3100
XLEC4100
XLVB321
XLVB322
XLVB323
BPLU
BPLU
BPLU
BPLU
BUSW
BPLU
BPLU
BPLU
BPLU
BPLU
14-56
14-56
14-56
14-56
14-48
14-56
14-56
14-56
14-56
14-56
X2003IG
X2003L
X2003LG
X2003LGIG
X2003LIG
X2003M
X2003MG
X2003MGIG
X2003MIG
X2003PB
BUSW 14-48
14-49
14-49
14-49
14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
14-49
X4004LG
X4004LGIG
X4004LIG
X4004M
X4004MG
X4004MGIG
X4004MIG
XC1003
XC10032
XC10032G
14-49
14-49
14-49
14-49
14-49
14-49
14-49
BUSW 14-48
BUSW 14-48
BUSW 14-48
XLVB351
XLVB352
XLVB353
XLVB421N
XLVB422N
XLVB423N
XLVB451N
XLVB452N
XLVB453N
XOC
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
BPLU
X2003PBG
X2004
X20042
X20042G
X20042GIG
X20042IG
X20045
X20045G
X20045GIG
X20045IG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-49
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
XC10032GIG
XC10032IG
XC10035
XC10035G
XC10035GIG
XC10035IG
XC1003ETVB
XC1003ETVBG
XC1003ETVBGIG
XC1003ETVBIG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-48
14-48
14-48
14-48
14-48
14-48
14-49
14-49
14-49
14-49
XQ35
XQ35R
XQ45
XQ45R
XQBRKCVR
11
14
14
14
17
BPLU
BPLU
BPLU
BPLU
X2004ETVB
X2004ETVBG
X2004ETVBGIG
X2004ETVBIG
X2004FE
X2004FEG
X2004FEGIG
X2004FEIG
X2004G
X2004GIG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-49
14-49
14-49
14-49
14-48
14-48
14-48
14-48
14-48
14-48
XC1003FE
XC1003FEG
XC1003FEGIG
XC1003FEIG
XC1003G
XC1003GIG
XC1003IG
XC1003L
XC1003LG
XC1003LGIG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-49
14-49
14-49
X2004IG
X2004L
X2004LG
X2004LGIG
X2004LIG
X2004M
X2004MG
X2004MGIG
X2004MIG
X2004PB
BUSW 14-48
14-49
14-49
14-49
14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
BUSW 14-49
XC1003LIG
XC1004
XC10042
XC10042G
XC10042GIG
XC10042IG
XC10045
XC10045G
XC10045GIG
XC10045IG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
X2004PBG
X4003
X40032
X40032G
X40032GIG
X40032IG
X40035
X40035G
X40035GIG
X40035IG
BUSW 14-49
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
XC1004ETVB
XC1004ETVBG
XC1004ETVBGIG
XC1004ETVBIG
XC1004FE
XC1004FEG
XC1004FEGIG
XC1004FEIG
XC1004G
XC1004GIG
BUSW
BUSW
BUSW
BUSW
BUSW
BUSW
19-26
BUSW
BUSW
Product
Category Page
Product
Category Page
16-65
16-66
16-67
16-44
16-45
16-160
NEMA 16-161
NEMA 16-46
16-160
NEMA 16-161
1D1N007
1D1N007QST
1D1N010
1D1N010QST
1D1N015
1D1N015QST
1D1N105
1D1N105QST
1D1N110QST
1D1N115QST
16-157
16-48
16-156
16-157
16-158
16-81
16-82
16-83
16-84
16-85
1D1N205
1D1N205QST
1D1N505
1D1N505QST
1D1N555QST
1D1N705
1D1N705QST
1D1N775QST
1D1Y015TP1
1D1Y025TP1
NEMA
NEMA
NEMA
IEC
NEMA
NEMA
NEMA
NEMA
16-86
16-87
16-88
16-80
16-90
16-91
16-92
16-93
16-156
16-157
1D1Y025TP1QST
1D1Y037TP1
1D1Y037TP1QST
1D1Y050TP1
1D1Y050TP1QST
1D1Y075TP1
1D1Y075TP1QST
1D1Y100TP1
1D1Y100TP1QST
1D1Y167TP1
7-18
7-6
7-18
7-6
7-18
7-6
7-18
7-6
7-18
7-6
75
75
83
83
83
83
84
84
84
84
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
16-86
16-87
16-52
16-53
16-54
16-55
16-52
16-53
16-54
16-55
1D1Y167TP1QST
1E1U003
1E1U005
1E1U007
1E1U010
1E1U015
1E1U025
1F1R003
1F1R005
1F1R007
7-18
7-6
7-6
7-6
7-6
7-6
7-6
7-6
7-6
7-6
14-56
14-56
14-56
14-56
14-56
14-56
14-56
14-56
14-56
14-48
87
87
87
88
88
97
97
97
958
050BB1224Q
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
XFMR
16-58
16-59
16-62
16-60
16-61
16-49
16-50
16-51
16-49
7-19
1F1R010
1F1R015
1F1R025
1G1R003
1G1R005
1G1R007
1G1R010
1G1R015
1G1R025
1G1Y025TP1
7-6
7-6
7-6
7-7
7-7
7-7
7-7
7-7
7-7
7-7
NEMA
NEMA
NEMA
NEMA
NEMA
14-56
14-56
14-56
14-56
14-56
16-10
16-14
16-15
16-16
16-17
050BB1632Q
050BB2448Q
100BB1224Q
100BB1632Q
100BB2448Q
105BB1224Q
105BB1632Q
105BB2448Q
11-1056-01
11-1824-01
UNPB
7-19
7-19
7-19
7-19
7-19
7-19
7-19
7-19
10-11
10-11
1G1Y037TP1
1G1Y050TP1
1G1Y075TP1
1G1Y100TP1
1G1Y167TP1
1H1N001
1H1N002
1H1N003
1H1N005
1H1N007
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
17
17
17
17
17
17
18
18
18
22
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
16-18
16-19
16-20
16-21
16-22
16-23
16-24
16-25
16-26
16-27
12-1110-01
12CLN500
12CLN500
150BB1224Q
150BB1632Q
150BB2448Q
1B1N001
1B1N002
1B1N003
1B1N005
10-11
6-116
6-135
XFMR 7-19
7-19
7-19
7-6
7-6
7-6
7-6
1H1N010
1H1N015
1H1N025
1H1N037
1H1N050
1H1N075
1H1N100
1H8N001
1H8N002
1H8N003
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
7-7
14-49
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
14-48
22
25
26
30
30
30
30
32
32
32
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
16-28
16-29
16-30
16-32
16-33
16-34
16-35
16-36
16-37
16-38
1B1N007
1B1N010
1B1N015
1B1Y025TP1
1B1Y037TP1
1B1Y050TP1
1B1Y075TP1
1B1Y100TP1
1B1Y167TP1
1BB1224Q
7-6
7-6
7-6
7-6
7-6
7-6
7-6
7-6
7-6
7-19
1H8N005
1H8N007
1LPC005
1LPC007
1LPC010
1LPC015
1LPC025
1X1N001
1X1N002
1X1N003
7-7
7-7
7-13
7-13
7-13
7-13
7-13
7-7
7-7
7-7
14-49
14-49
14-49
14-49
14-48
14-48
14-48
14-48
14-48
14-48
32
32
32
32
32
36
36
36
36
37
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
16-39
16-40
16-41
16-42
16-43
16-64
16-65
16-66
16-67
16-64
1BB1632Q
1BB2448Q
1D1N001
1D1N001QST
1D1N002
1D1N002QST
1D1N003
1D1N003QST
1D1N005
1D1N005QST
7-19
7-19
7-6
7-18
7-6
7-18
7-6
7-18
7-6
7-18
1X1N005
1X1N007
1X1N010
1X1N015
1X1N025
205BB1224Q
205BB1632Q
205BB2448Q
20STD1000
24CLP600
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
NEMA
NEMA
NEMA
NEMA
NEMA
Catalog
Number
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
XFMR
7-6
7-18
7-6
7-18
7-6
7-18
7-6
7-18
7-18
7-18
7-6
7-18
7-6
7-18
7-18
7-6
7-18
7-18
7-6
7-6
7-7
7-7
7-7
7-7
7-7
XFMR 7-19
XFMR 7-19
7-19
6-64
6-135
Product Index
2BB1224Q
2BB1632Q
2BB2448Q
2CLD20
2CLD20
2CLF350
2CLF350
2NLK1
2NLK18
2NLK2
XFMR
XFMR
7-19
7-19
7-19
6-134
6-96
6-100
6-134
UNPB 10-12
UNPB 10-11
UNPB 10-12
3C5Y150TP1
3CLD20
3CLD20
3CLF350
3CLF350
3CLJ350
3CLJ350
3CLJ600
3CLJ600
3CLJ750
7-10
6-134
6-96
6-100
6-134
6-104
6-135
6-104
6-135
6-104
3F3Y150K4TP1
3F3Y150TE
3F3Y150TP1
3F3Y150TP1QST
3F3Y225K13TP1
3F3Y225K20TP1
3F3Y225K30TP1
3F3Y225K4TP1
3F3Y225RTP1QST
3F3Y225TP1
7-9
7-8
7-8
7-18
7-9
7-9
7-9
7-9
7-18
7-8
3LD2213-0TK__
3LD2213-1TL53
3LD2244-0TK__
3LD2244-1TL53
3LD2254-0TK__
3LD2254-1TL__
3LD2264-0TB51-0US1
3LD2264-0TB53-0US1
3LD2264-1GP51-0US1
3LD2264-1GP53-0US1
2NLK30
2NLK42
2TA2LG600LD
2TA2LG600LN
2TA2N8750
2TA2N8750
2TA2N8750
2TA3N8750
2TA3N8750
2TA3N8750
UNPB
UNPB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
10-11
10-11
6-135
6-135
6-51
6-55
6-83
6-51
6-55
6-83
3CLJ750
3CLL750
3CLL750
3F1Y015TE
3F1Y015TP1
3F1Y015TP1QST
3F1Y030TE
3F1Y030TP1
3F1Y030TP1QST
3F1Y045TE
6-135
6-108
6-135
7-8
7-8
7-18
7-8
7-8
7-18
7-8
3F3Y300K13TP1
3F3Y300K20TP1
3F3Y300K30TP1
3F3Y300K4TP1
3F3Y300RTP1QST
3F3Y300TP1
3F3Y500K13TP1
3F3Y500K20TP1
3F3Y500K30TP1
3F3Y500K4TP1
7-9
7-9
7-9
7-9
7-18
7-8
7-9
7-9
7-9
7-9
3LD2264-1TS51-0US1
3LD2264-1TS53-0US1
3LD2264-2TW51-0US1
3LD2264-2TW53-0US1
3LD2504-0TK__
3LD2504-3VK53
3LD2514-0TK__
3LD2545-0TK__
3LD2555-0TK__
3LD2565-0TB51-0US1
HDSS
HDSS
HDSS
HDSS
2TA3NG750
2TA4N8500
2TA4N8500
2TA4N8500
2TA4NG500
2TA4P8500
2TA4P8500
2TA4P8500
2TC2LG600LD
2TC2LG600LN
MCCB 6-135
MCCB 6-51
MCCB 6-55
MCCB 6-82
6-135
MCCB 6-51
MCCB 6-55
MCCB 6-82
6-135
6-135
3F1Y045TP1
3F1Y045TP1QST
3F1Y075TE
3F1Y075TP1
3F1Y075TP1QST
3F1Y112TE
3F1Y112TP1
3F1Y112TP1QST
3F1Y150TE
3F1Y150TP1
7-8
7-18
7-8
7-8
7-18
7-8
7-8
7-18
7-8
7-8
3F3Y500RTP1QST
3F3Y500TP1
3F3Y750TP1
3F5R015
3F5Y015TP1
3F5Y030TP1
3F5Y045TP1
3F5Y075TP1
3F5Y112TP1
3F5Y150TP1
7-18
7-8
7-8
7-9
7-9
7-9
7-9
7-9
7-9
7-9
3LD2565-0TB53-0US1
3LD2565-1GP51-0US1
3LD2565-1GP53-0US1
3LD2704-0TK__
3LD2714-0TK__
3LD2766-0TB51-0US1
3LD2766-0TB53-0US1
3LD2766-1GP51-0US1
3LD2766-1GP53-0US1
3LD2804-0TK__
HDSS
HDSS
HDSS
3B1Y015TP1
3B1Y030TP1
3B1Y045TP1
3B1Y075TP1
3B1Y112TP1
3B1Y150TP1
3B1Y225TP1
3B3R003
3B3R006
3B3R009
7-10
7-10
7-10
7-10
7-10
7-10
7-10
7-10
7-10
7-10
3F1Y150TP1QST
3F1Y225TP1
3F1Y300TP1
3F1Y500TP1
3F1Y750TP1
3F2R003
3F2R006
3F2R009
3F2R015
3F3R003
7-18
7-8
7-8
7-8
7-8
7-8
7-8
7-8
7-8
7-8
3F5Y225TP1
3F5Y300TP1
3F5Y500TP1
3G3R003
3G3R006
3G3R009
3G3R015
3G3Y015TP1
3G3Y030TP1
3G3Y045TP1
7-9
7-9
7-9
7-11
7-11
7-11
7-11
7-11
7-11
7-11
3LD2814-0TK__
3LD2866-0TB51-0US1
3LD2866-0TB53-0US1
3LD2866-1GP51-0US1
3LD2866-1GP53-0US1
3LD9200-5B
3LD9200-5BF
3LD9200-5C
3LD9200-5CF
3LD9220-0B
3B3R015
3B3S225TP1
3B3S300TP1
3B3S500TP1
3B3Y015TP1
3B3Y015XESTP1
3B3Y030TP1
3B3Y030XESTP1
3B3Y045TP1
3B3Y045XESTP1
7-10
7-10
7-10
7-10
7-10
7-12
7-10
7-12
7-10
7-12
3F3R003QST
3F3R006
3F3R006QST
3F3R009
3F3R009QST
3F3R015
3F3S000TP1
3F3Y015K13TP1
3F3Y015K20TP1
3F3Y015K30TP1
7-18
7-8
7-18
7-8
7-18
7-8
7-8
7-9
7-9
7-9
3G3Y075TP1
3G3Y112TP1
3G3Y150TP1
3G3Y225TP1
3G3Y300TP1
3G3Y500TP1
3G4R015A
3G4R030A
3G4R045A
3G4R075A
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
3B3Y075TP1
3B3Y075XESTP1
3B3Y112TP1
3B3Y112XESTP1
3B3Y150TP1
3B5R009
3B5R015
3B5R030TP1
3B5R045TP1
3B5R075TP1
7-10
7-12
7-10
7-12
7-10
7-10
7-10
7-10
7-10
7-10
3F3Y015K4TP1
3F3Y015TE
3F3Y015TP1
3F3Y015TP1QST
3F3Y015XESTP1
3F3Y030K13TP1
3F3Y030K20TP1
3F3Y030K30TP1
3F3Y030K4TP1
3F3Y030TE
7-9
7-8
7-8
7-18
7-12
7-9
7-9
7-9
7-9
7-8
3G4R112A
3G4R150A
3G4R225A
3G4R300A
3G4R500A
3G5R003
3G5R006
3G5R009
3G5R015
3G5Y015TP1
3B5R112TP1
3B5R150TP1
3B5S225TP1
3B5S300TP1
3B5S500TP1
3BB1224Q
3BB1632Q
3BB2448Q
3C3S225TP1
3C3S300TP1
7-10
7-10
7-10
7-10
7-10
7-19
7-19
7-19
7-10
7-10
3F3Y030TP1
3F3Y030TP1QST
3F3Y030XESTP1
3F3Y045K13TP1
3F3Y045K20TP1
3F3Y045K30TP1
3F3Y045K4TP1
3F3Y045TE
3F3Y045TP1
3F3Y045TP1QST
7-8
7-18
7-12
7-9
7-9
7-9
7-9
7-8
7-8
7-18
3G5Y030TP1
3G5Y045TP1
3G5Y075TP1
3G5Y112TP1
3G5Y150TP1
3G5Y225TP1
3G5Y300TP1
3G5Y500TP1
3LD2064-0TB51-0US1
3LD2064-0TB53-0US1
3C3S500TP1
3C3Y015TP1
3C3Y015XESTP1
3C3Y030TP1
3C3Y030XESTP1
3C3Y045TP1
3C3Y045XESTP1
3C3Y075TP1
3C3Y075XESTP1
3C3Y112TP1
7-10
7-10
7-12
7-10
7-12
7-10
7-12
7-10
7-12
7-10
3F3Y045XESTP1
3F3Y075K13TP1
3F3Y075K20TP1
3F3Y075K30TP1
3F3Y075K4TP1
3F3Y075TE
3F3Y075TP1
3F3Y075TP1QST
3F3Y075XESTP1
3F3Y112K13TP1
7-12
7-9
7-9
7-9
7-9
7-8
7-8
7-18
7-12
7-9
3LD2064-1GP51-0US1
3LD2064-1GP53-0US1
3LD2103-0TK__
3LD2103-1TL__
3LD2103-1TP__
3LD2103-2EP__
3LD2113-0TK__
3LD2113-1TL__
3LD2144-0TK__
3LD2144-1TL__
3C3Y112XESTP1
3C3Y150TP1
3C5S225TP1
3C5S300TP1
3C5S500TP1
3C5Y015TP1
3C5Y030TP1
3C5Y045TP1
3C5Y075TP1
3C5Y112TP1
7-12
7-10
7-10
7-10
7-10
7-10
7-10
7-10
7-10
7-10
3F3Y112K20TP1
3F3Y112K30TP1
3F3Y112K4TP1
3F3Y112TE
3F3Y112TP1
3F3Y112TP1QST
3F3Y112XESTP1
3F3Y150K13TP1
3F3Y150K20TP1
3F3Y150K30TP1
7-9
7-9
7-9
7-8
7-8
7-18
7-12
7-9
7-9
7-9
3LD2154-0TK__
3LD2154-1TL__
3LD2154-1TP__
3LD2154-2EP__
3LD2164-0TB51-0US1
3LD2164-0TB53-0US1
3LD2164-1GP51-0US1
3LD2164-1GP53-0US1
3LD2203-0TK__
3LD2203-1TL__
XFMR
XFMR
XFMR
Page
Catalog
Number
Product
Category Page
XFMR
XFMR
XFMR
Catalog
Number
Product
Category Page
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
Catalog
Number
Product
Category Page
Catalog
Number
Product
Category Page
4-3
4-3
4-3
4-3
4-2
4-2
3-32
3-32
3-32
3-32
3RT19 5
3RT19 6
3RT19 6
3RT19 6
3RT19 7
3RT19 7
3RU19 0
“3RV10, 13”
3RV19
3RW30/31
NEMA 16-86
16-155
16-156
NEMA 16-88
16-155
NEMA 16-88
NEMA 16-88
NEMA 16-10
IEC 16-80
NEMA 16-164
3-32
3-32
3-32
3-32
4-2
4-2
4-3
4-3
4-2
3-32
3RW40
3RW44
3RW44
3TA12JG04
3TA12JG04
3TA1DG30
3TA1DG30
3TA1EG10
3TA1EG10
3TA1EG10
IEC 16-165
IEC 16-166
IEC 16-167
6-104
6-135
MCCB 6-134
MCCB 6-96
MCCB 6-24
MCCB 6-32
MCCB 6-81
3-32
3-32
3-32
4-2
4-3
3-32
3-32
3-32
3-32
4-2
3TA1EG30
3TA1EG30
3TA1EG30
3TA1JG750
3TA1JG750
3TA1JG750
3TA1JG750
3TA2JG250
3TA2JG250
3TA2LG600LD
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-24
6-32
6-81
6-104
6-104
6-135
6-135
6-104
6-135
6-108
4-3
3-32
3-32
3-32
3-32
4-3
4-3
4-3
4-3
4-3
3TA2LG600LD
3TA2LG600LN
3TA2LG600LN
3TA2MG750
3TA2MG750
3TA2N8750
3TA2N8750
3TA2N8750
3TA2N8750
3TA3DG02
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-135
6-108
6-135
6-112
6-135
6-51
6-53
6-55
6-83
6-134
3LD9220-0C
3LD9220-2B
3LD9220-2C
3LD9220-2C
3LD9221-0A
3LD9221-0A
3LD9221-2A
3LD9221-2A
3LD9224-1B
3LD9224-1B
4-3
4-3
3-33
4-3
4-3
4-3
4-3
4-3
4-3
4-3
3TA3DG02
3TA3EG02
3TA3FG20
3TA3FG20
3TA3MG500
3TA3MG500
3TA3MG600
3TA3MG600
3TA3N8750
3TA3N8750
MCCB
MCCB
6-96
6-83
6-100
6-134
6-112
6-135
6-112
6-135
6-51
6-53
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
3LD9224-1D
3LD9224-1D
3LD9224-3B
3LD9224-3B
3LD9224-3D
3LD9224-3D
3LD9250-0BA
3LD9250-0CA
3LD9250-2BA
3LD9250-2CA
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
3-33
3TA3N8750
3TA3N8750
3TA3NG750
3TA3NG750
3TA4N8500
3TA4N8500
3TA4N8500
3TA4N8500
3TA4NG500
3TA4NG500
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-55
6-83
6-116
6-135
6-51
6-53
6-55
6-82
6-116
6-135
7-11
7-11
7-11
7-11
7-11
7-11
7-11
7-11
3-32
3-32
3LD9250-2CA
3LD9251-0A
3LD9251-0A
3LD9251-2A
3LD9251-2A
3LD9280-0B
3LD9280-0C
3LD9280-2B
3LD9280-2C
3LD9280-2C
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
3-33
4-3
3TA4NG500H
3TA4NG500H
3TA4P8500
3TA4P8500
3TA4P8500
3TA4P8500
3TA6DG04
3TA6DG04
3TA6EG06
3TA6FG04
3-32
3-32
4-2
4-2
4-2
4-2
4-3
4-3
4-3
4-3
3LD9281-2A
3LD9281-2A
3LD9284-1B
3LD9284-1B
3LD9284-1D
3LD9284-1D
3LD9284-3B
3LD9284-3B
3LD9284-3D
3LD9284-3D
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
4-3
3TA6FG04
3TA6JG20
3TA6JG20
3TA6PG750
3TA6PG750
3TAW1FG350
3TAW1FG350
3TC1DG30
3TC1DG30
3TC1GG20
6-134
6-104
6-135
6-120
6-135
MCCB 6-100
MCCB 6-134
6-134
6-96
MCCB 6-22
4-2
4-2
4-2
4-2
3-32
3-32
3-32
3-32
4-2
4-2
3LPC009
3LPC015
3LPC022
3LPC030
3NW7
“3RA19 6, 7”
3RB20
3RB29 8
3RH19 21
3RP20
7-13
7-13
7-13
7-13
16-89
16-86
16-48
16-88
16-88
16-88
3TC1GG20
3TC1GG20
3TC1Q1
3TC1Q1
3TC1Q1
3TC2LG600LD
3TC2LG600LD
3TC2LG600LN
3TC2LG600LN
3TC4NG500
MCCB
MCCB
MCCB
MCCB
MCCB
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
HDSS
NEMA
NEMA
NEMA
NEMA
NEMA
NEMA
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
MCCB
MCCB
MCCB
MCCB
MCCB
MCCB
6-116
6-135
6-51
6-53
6-55
6-82
6-134
6-96
6-83
6-100
6-30
6-81
6-22
6-30
6-81
6-108
6-135
6-108
6-135
6-116
19-27
PRODUCT
INDEX
Product
Category
19
Catalog
Number
Product Index
Catalog
Number
PRODUCT
INDEX
19
3TC4NG500
3TC6PG750
3TC6PG750
3TCW1FG350
3TCW1FG350
3TW1DG20
3TW1DG20
3TW1EG30
3TW1EG30
3TW1FG350
Product
Category
MCCB
MCCB
MCCB
MCCB
Page
Catalog
Number
Product
Category Page
6-135
6-120
6-135
6-100
6-134
6-134
6-96
6-32
6-81
6-100
52PX9
52PX9
52RA1
52RA2
52RA4
52RA5
52RA6
52RA7
52RB3
52SA2
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-201
16-207
16-211
16-212
16-211
16-211
16-212
16-212
16-211
16-193
52SA2
52SA3
52SA4
52SA7
52SB2
52SB2
52SC6
52SC6
52SW2
52SW2
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-197
16-198
16-198
16-197
16-193
16-197
16-193
16-199
16-204
16-208
3TW1FG350
3TW1JG600
3TW1JG600
42NLK18
42NLK30
42NLK42
4MLKA1
4MLKA3
4MLKC1
4MLKC3
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
UNPB
6-134
6-104
6-135
10-11
10-11
10-11
10-11
10-11
10-11
10-11
505BB1224Q
505BB1632Q
505BB2448Q
50A
50B
50C
50C
50D
50D
50D
XFMR
XFMR
XFMR
PILO
PILO
PILO
PILO
PILO
PILO
PILO
7-19
7-19
7-19
16-181
16-181
16-181
16-182
16-181
16-182
16-183
52SX2
52SX2
5BB1224Q
5BB1632Q
5BB2448Q
64690-1
6CLE2
6CLF1
6CLJ1
6CLL1
50D
50E
50E
50F
50G
50H
50H
50J
50L
50M
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-187
16-182
16-183
16-184
16-184
16-184
16-186
16-185
16-185
16-184
6CLL350
6CLL350
6CLL600
6CLL600
6E62
6F62
6FPB01
6FPB01
6FPB01
6FPB02
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
6-108
6-135
6-108
6-135
12-26
12-26
10-50
10-61
12-26
10-50
50M
50N
50R
50R
50Z
52AA
52AA
52AB
52ABT
52ABW
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-185
16-185
16-182
16-183
16-187
16-212
16-213
16-212
16-200
16-200
6FPB02
6FPB02
6FPB03
6FPB03
6FPB03
6FPB05
6FPB05
6FPB05
6FPB10
6FPB10
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
10-61
12-26
10-50
10-61
12-26
10-50
10-61
12-26
10-50
10-61
52AE
52AL
52AX
52BA
52BJ
52C1
52C2
52C3
52MA
52MA2
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-213
16-212
16-212
16-213
16-213
16-216
16-216
16-217
16-212
16-200
6FPB10
6JJ61
6JJ62
6LL61
6QJ2
6SCJ1
6SCL1
6SJL1
6SLL1
705BB1224Q
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
SWBD
XFMR
12-26
12-26
12-26
12-26
12-26
12-26
12-26
12-26
12-26
7-19
52MA3
52MA4
52NA
52ND
52NE
52NL
52NP02
52PA2
52PA2
52PA3
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-200
16-200
16-219
16-219
16-219
16-219
16-200
16-191
16-196
16-191
705BB1632Q
705BB2448Q
73
73
73
74
74
74
74
74
XFMR
XFMR
IEC
IEC
IEC
IEC
IEC
IEC
IEC
IEC
7-19
7-19
16-168
16-169
16-170
16-172
16-173
16-174
16-175
16-176
52PA3
52PA4
52PA6
52PA8
52PA8
52PB9
52PB9
52PC4
52PE3
52PE4
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-192
16-194
16-195
16-190
16-196
16-190
16-196
16-194
16-191
16-191
8WA10 1
8WA18 1
9CLM500
9CLM500
NEMA 16-89
NEMA 16-89
6-112
6-135
52PE4
52PE6
52PX2
52PX2
52PX3
52PX3
52PX4
52PX6
52PX8
52PX8
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
PILO
16-194
16-195
16-202
16-207
16-202
16-203
16-205
16-206
16-201
16-207
19-28
Catalog
Number
Product
Category Page
Catalog
Number
PILO 16-204
PILO 16-208
XFMR 7-19
XFMR 7-19
7-19
RESG 2-10
SWBD 12-26
SWBD 12-26
SWBD 12-26
SWBD 12-26
Siemens Power Distribution & Control, SPEEDFAX™ 2007-2008 Product Catalog
Product
Category Page
Catalog
Number
Product
Category Page
We offer a wide variety of high quality products and modifications
including combination and non-combination starters that are guaranteed
for trouble-free operation.
Space getting smaller?
Siemens switchboards give you room to breathe.
integrated
modpro
ModPro PlusTM means shorter turn-around for standard and modified
NEMA control products. Instead of waiting on the factory, our ModPro
Plus distributors can turn your order around as quickly as the same day.
쏘2007 Siemens Energy & Automation, Inc.
쏘2007 Siemens Energy & Automation, Inc.
When Waiting Is Not An Option,
ModPro Plus Delivers.
s
For more information or to contact a sales representative, call,
e-mail, or visit our website.
Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com/modproplus
The Siemens integrated power systems switchboard provides a smaller,
modular, reliable solution to meet the demanding space needs of the
electrical room.
Components such as power monitoring, lighting panels, transformers,
and lighting control are all incorporated into one piece of equipment.
One product, one supplier, and one invoice – it just makes sense.
Ask your sales representative about using i-3 Control TechnologyTM in
your IPS switchboard design.
For more information or to contact a sales representative, call,
e-mail, or visit our web site.
Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com
s
SPEEDFAXTM 2007–2008
SPEEDFAXTM 2007–2008
Product Catalog
Product Catalog
power distribution
1-800-964-4114
info.sea@siemens.com
www.sea.siemens.com
쏘2007 Siemens Energy & Automation, Inc. All Rights Reserved.
Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective
companies. Specifications are subject to change without notice.
PDPC-01000-0607 (Supersedes PDPC-01000-0305) 150M0607RDD Printed in USA
s
Siemens Energy & Automation, Inc.
3333 Old Milton Parkway
Alpharetta, GA 30005
Residential
Commercial
Industrial
s
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Modify Date : 2008:11:19 20:44:32-05:00 Create Date : 2007:12:13 10:39:38-06:00 Metadata Date : 2008:11:19 20:44:32-05:00 Document ID : uuid:10d055fc-05c7-4c5d-9cee-fd86b69b39a9 Instance ID : uuid:29aa683d-2e38-4bb9-828a-51fd43d03f17 Format : application/pdf Title : PDPC-01000-0607 Creator : www.electricalmanuals.net Description : - CATALOGS - SIEMENS - SPEEDFAX - Producer : Creo Normalizer JTP Keywords : SPEEDFAX 2007–2008 Product Catalog Page Count : 940 Author : www.electricalmanuals.net Subject : - CATALOGS - SIEMENS - SPEEDFAX - Trapped : FalseEXIF Metadata provided by EXIF.tools