105319 Catalog

: Pdf 105319-Catalog 105319-Catalog 622454 Batch7 unilog

Open the PDF directly: View PDF .
Page Count: 16

ELECTRICAL SYSTEMS

Electrical

Nonmetallic

Tubing & Fittings

ELECTRICAL NONMETALLIC TUBING & FITTINGS

• Easy installation

• Complete concrete-tight system

• Approved for use in fire-rated

floor/ceiling assemblies

We build tough products for tough environments®

We designed Kwikon Electrical Nonmetallic Tubing (ENT), fittings,

slab boxes and accessories with two goals. Firstly, we set out

to create an integrated ENT system tough enough to meet the

rugged day-to-day challenges of the construction industry. More

importantly, we wanted to make a system that saves time and

money on the job site. People who work with it daily insist we

got it right on both counts.

The best alternative to heavy and labor-intensive 10 ft. lengths

of metal conduit, Kwikon was made for fast, easy installation,

saving valuable man-hours on any construction site. As the

toughest non-corroding, non-conducting ENT system on the

market, its durability – even under tons of concrete– ensures

years of reliable use for savings over the long run.

Saving contractors time, money and worry, Kwikon is

an integrated ENT system that makes sure the job

gets done right.

KWIKON: AN INTEGRATED ENT SYSTEM THAT

ACCESSORIES

To round out our fully integrated ENT

system, Kwikon also provides a wide

range of ENT wall boxes, ceiling boxes,

plaster rings and covers for multiple

applications.

FORM STUBBIES

Kwikon stubbies are used to hold conduit

ends firmly in place until concrete is

poured and cured. They eliminate the

need to drill holes in plywood forms,

and they protect the ENT from possible

breakage during the removal of wood

forms after the concrete has set.

SAVES TIME & MONEY

FITTINGS

Kwikon offers the industry’s most complete

line of ENT fittings for all ENT sizes and

transition needs – bridge gaps from ENT

to EMT or to metallic slab boxes or to Rigid

PVC. Made rugged and concrete-tight, our

fittings require no solvent welding or tape,

and can be joined to any UL-listed and

CSA ENT.

SLAB BOXES

Available in a variety of styles, Kwikon slab

boxes are engineered tough and completely

concrete-tight. No more stuffing boxes with

paper to keep concrete out.

TUBING

Light and flexible, Kwikon tubing

comes with color-coded stripes for

easy cable identification. Use Kwikon

for communications (yellow), fire

alarm and emergencies (red) and

power (blue).

WALLS

Kwikon’s flexibility and ease of handling in

metal, wood or block walls reduce the time and

labor needed to install electrical raceways.

A CLEAN CONNECTION

Kwikon ENT Stubbies provide a clean

1-1/2" stub of ENT to make your

connection while protecting the ENT from the

traditional breakage that can occur when the

forms are removed.

FLOOR / CEILING ASSEMBLIES

Kwikon’s light weight and versatility make it

perfect for slab applications. Integrated with

our slab boxes, Kwikon can be used to install

lights and ceiling fans.

Since its introduction in 1986, Kwikon has been trusted by

electricians, engineers, building owners and general

contractors across North America. Thanks largely to its

rugged reliability and quick, easy installation, Kwikon has

established itself as the market leader.

While metal was the industry’s material of choice in the

past, Kwikon has proved itself a more versatile, flexible and

affordable improvement. Coiled in long convenient reels, it’s

simple and fast to measure, cut and fit—no special tools or

training are needed. Kwikon’s corrugated construction is so

flexible it can be bent easily by hand. And our patented

Kwikon couplings and connectors, with their six locking tab

design, provide an instant snap-on, lock-in fit that easily

meets UL requirements for conduit pull-out.

What’s more, it comes backed by a national sales network

of Kwikon specialists dedicated to making sure every job

you do turns out right. No wonder so many contractors

agree Kwikon is number one.

INSLAB FLOORS

With its concrete-tight design and easy-to-

install angled stubbies, Kwikon offers the

perfect ENT solution for inslab floors.

KWIKON: THE ENT SYSTEM CONTRACTORS D

MARKETS

■Residential

(Low or High Rise)

■Commercial

(Low or High Rise)

■Institutional

(Prisons, Schools, Universities)

■Hospitals and Nursing Homes

(Only in nonpatient care areas)

■Stadiums and Arenas

APPLICATIONS

EPEND ON

NEC, ARTICLE 362

Rules governing the installation of KWIKON

ENT are described in the 2002 National

Electrical Code, ANSI/NFPA Article 362.

KWIKON ENT systems are recognized for

use in places of assembly as referenced in

Articles 518 and 520.

KWIKON ENT may be installed and

concealed in floors, walls, ceilings and

suspended ceilings where a thermal barrier

of material has a minimum of fifteen minute

finish rating.

KWIKON ENT may be installed and

exposed in areas not subject to physical

damage and where the building does not

exceed three floors above grade [Section

362.10 (1)].

NOTE: KWIKON ENT may penetrate fire-

rated walls, floors or ceilings with a UL-

listed or recognized through-penetration

fire-stop system.

FIRE-RESISTIVE CONSTRUCTION

AND WALL ASSEMBLIES

KWIKON ENT tubing, fittings and slab

boxes are approved for use in non-

combustible 2 hour and 4 hour fire-rated

floor/ceiling assemblies. Normal weight

concrete cover must be provided; a minimum

of 2-1/8" for 2 hour assemblies and 2-3/8"

for 4 hour assemblies.

[ULI File: E 78276 and ULC File: R-19226].

Kwikon Electrical Nonmetallic Tubing and

Kwikon fittings have been investigated for

use in a non-load-bearing wall and partition

assembly. The report (ULC CR2196)

concludes the wall assemblies with Kwikon

ENT and fittings will provide a 2 hour

resistance to the passage of the flame and

dangerous transmission of heat.

[ULC File: CR1296 and UL File: E122659]

CODES & STANDARDS

As everyone knows, accidents happen…especially on construction

sites. Workers trip, knock over equipment, drop tools. A good

measure of an ENT’s strength is how it performs on the job site.

Made of heavy-duty, impact-resistant PVC, Kwikon is tough

enough to withstand the day-to-day bumps and knocks of any job

site. As a result, Kwikon reduces costly construction site damage

and saves money by reducing waste.

Yet a bigger test of an ENT system’s strength is how it holds

up to being encased in concrete. Kwikon is completely

non-corroding and concrete-tight, ensuring years of rugged

durability once encased in concrete or enclosed behind walls

or ceilings. Kwikon’s strength saves you from the worry –

and costs – of future repairs or maintenance.

KWIKON: TOUGHER THAN ANY OTHER ENT S

SUITABLE FOR CONCRETE

ENCASEMENT

Every contractor’s worst nightmare is a product

that doesn’t work or hold up in poured concrete;

the costs of replacement and repair can be

tremendous. Every Kwikon product is

designed for concrete encasement,

requiring no solvent welding or tape

around the connections, or paper

stuffed inside.

IMPACT RESISTANT

Kwikon ENT is made of impact

resistant PVC, so it won’t break or

crack if an object is dropped on it

or someone steps on it.

FIRE RESISTANT

Kwikon ENT tubing,

fittings and slab boxes are

approved for use in

noncombustible 2 hour

and 4 hour fire-rated

floor/ceiling assemblies.

PULL RESISTANT

Once a length of Kwikon tubing

is connected to a coupling or

connector, it stays connected,

thanks to our unique six

locking tab design. With a

pull-out resistance of up

to 175 lbs., our patented

snap-on, lock-in system

provides a seal that easily

meets UL requirements

for conduit pull-out.

Strong, solid fittings meeting all UL requirements

Patented “six locking tab” design creates a strong,

pull-out resistant and concrete tight seal

Flexible enough to be bent by hand, yet tough

enough to withstand crushing and breaking

YS TEM ON THE MARKET

With its convenient coil and reel lengths of up to 1500 ft. and

snap-on fittings, Kwikon uses fewer couplings over long spans

than metal conduit and eliminates the need for time-intensive

set-screw couplings. And compared to other conduit systems,

connecting Kwikon ENT to a Kwikon slab box is as quick and

easy as fitting tubing into a coupling—it’s a snap!

Unlike metal conduit which has to be cut and bent, using

specialized equipment, to navigate turns and corners, Kwikon can

be bent and twisted by hand, saving hours of construction site

time. When it does have to be cut, no special tools or equipment

are needed—a standard hack saw will get the job done, but we

recommend our Kwikon ENT cutter for clean square cuts.

Its lightweight and fast, easy installation, even in cramped

narrow spaces, make Kwikon the number one choice for

commercial, industrial, institutional and residential construction.

KWIKON: FASTER AND EASIER TO INSTALL T

Color-coded stripes permit system

designation and make cable

identification easy.

Aligned hub entries allow for easy cable pull-through

Kwikon slab boxes are completely concrete-tight

Click-together locking tabs make connecting ENT a snap!

UNROLL KWIKON TO

DESIRED LENGTH

Available in convenient coil and reel lengths

up to 1,500 ft.,Kwikon gives you the

flexibility to measure out exactly the amount

of tubing you need. Kwikon requires fewer

couplings for long spans than metal conduit.

It’s recommended ENT be securely fastened

at 2 – 3 ft. intervals.

INSTALLING KWIKON IS THIS EASY

PULL CABLE THROUGH

KWIKON

Kwikon’s interior corrugated surface

significantly reduces the amount of friction

when pulling cables through long runs,

even in runs with 90obends. With Kwikon,

you can pull longer runs of cable without

worrying about damage.

SIMPLY SNAP

CONNECTIONS TOGETHER

With no special tools or equipment needed,

Kwikon’s unique snap-on fittings quickly and

easily join or terminate ENT and provide a

concrete-tight connection.

MAKE BENDS AND

TURNS BY HAND

Unlike metal which has to be cut to fit

tight spaces, Kwikon can be bent, turned

and manipulated by hand to wind around

irregular curves and corners. When bending,

ensure the radius of the curve is at least six

times the diameter of the tubing.

CUT KWIKON WITH

AN ENT CUTTER

For straight cuts every time use the

Kwikon scissor-style cutting tool. However,

no special tools or cutting equipment are

necessary. Kwikon can even be cut with a

standard utility knife.

1

5

4

3

2

HAN EMT

DESCRIPTION

The new ENT Support Unit (ESU) is designed to

raise the tubing or conduit up off the concrete

form during the concrete pour maintaining a

level raceway. With its minimal surface contact,

the ESU allows for maximum aggregate flow and

concrete consolidation.

Easy to use, the ESU snaps around any size

of ENT. It is perfect for use in high rise

buildings constructed with post-tensioned

(PT) concrete slabs.

NEW

NEW

NOTE: 1-1/4

"

, 1-1/2

"

, 2

"

red and yellow stripe

ENT is available by special order.

Kwikon ENT 10’ Sticks – Blue Stripe

Kwikon ENT Coils – Blue Stripe Kwikon ENT Reels – Blue Stripe

Kwikon ENT Reels – Color Coded

Storage of Kwikon ENT Tubing

Manufacturer recommends that ENT tubing should not be stored

outdoors where subjected to direct sunlight without protective

covering, i.e. packaging or tarps.

PRODUCT CATALOG

Size

(inches)

ID

(inches)

OD

(inches)

Length

(feet)

Product

Code

1/2 0.574 0.840 200 012031

3/4 0.778 1.050 100 012040

1 1.000 1.315 100 012041

1-1/4 1.340 1.660 500 012046

1-1/2 1.610 1.900 300 012032

22.020 2.375 225 012043

Size

(inches)

ID

(inches)

OD

(inches)

Length

(feet)

Product

Code

1/2 0.574 0.840 1500 012002

3/4 0.778 1.050 1000 012011

1 1.000 1.315 750 012021

1-1/4 1.340 1.660 1000 012047

1-1/2 1.610 1.900 750 012033

22.020 2.375 500 012044

Size

(inches)

Length

(feet) Product Code Crate

Size

1/2 10 012001 3600

3/4 10 012010 2200

1 10 012034 1800

Size

(inches)

Length

(feet)

Product Code

Red Yellow

1/2 1500 012305 012335

3/4 1000 012307 012337

1 750 012310 012340

ENT TUBING

FEATURES

■One size fits all 1/2" - 2"

■Saves time and labor

■Easy locking mechanism

■Securable to the concrete form

■Minimal footprint reduces amount of surface

contact

ENT SUPPORT UNIT (ESU)

Part

Number

Product

Code

ESU-10-35 089149

Kwikon (KK90) Stub Down Fittings (Kwikon x Kwikon)

Kwikon (KT90) Stub Down Fittings (Kwikon x Threaded)

Size

(inches)

Part

Number

Product

Code

1/2 KT90-10 089060

3/4 KT90-15 089059

1 KT90-20 089058

Size

(inches)

Part

Number

Product

Code

1/2 KK90-10 089055

3/4 KK90-15 089056

1 KK90-20 089057

KWIKON ENT STUB DOWN FITTINGS DESCRIPTION

Both styles of stub down fittings are designed for

direct connection to ENT on the horizontal by

means of our patented six locking tab for concrete

encasement Kwikon connection. The flanged base

of the threaded 90º stub down offers contractors

a NPSC threaded hub connection on the vertical

– at the exit point of the slab, allowing for the

direct transition to other raceway products.

With our unique Kwikon x Kwikon stub down

fitting, the user creates a stub down of ENT

without penetrating the form. After the concrete

pour the permanently encased fitting will be flush

with the bottom of the slab deck, ready to accept

the connection of ENT raceway.

Designed to offer the optimal balance of bend

radius and overall height in the slab, these fittings

provide a bend radius of 2-1/2" while standing less

than 3-3/8" tall.

KWIKON FITTINGS

*KTA connectors are supplied with locknuts.

Kwikon Transition Couplings

Kwikon Connectors*Kwikon Couplings

Kwikon Snap-in Connectors

Size

(inches)

Part

Number

Product

Code

1/2 KC10 089000

3/4 KC15 089001

1 KC20 089002

1-1/4 KC25 189670

1-1/2 KC30 189671

2KC35 189672

Size

(inches)

Part

Number

Product

Code

1/2 KTS10 089146

3/4 KTS15 089147

1 KTS20 089148

Size

(inches)

Part

Number

Product

Code

1/2 KTA10 089006

3/4 KTA15 089007

1 KTA20 089008

1-1/4 KTA25 189680

1-1/2 KTA30 189681

2KTA35 189682

Size

(inches)

Part

Number

Product

Code

1/2 KTC10 089012

3/4 KTC15 089013

1 KTC20 089014

PRODUCT CATALOG

(without Molded Connectors) – Volume 36 cu in.

Kwikon Shallow Slab Boxes with Knockouts

KWIKON SHALLOW SLAB BOXES

Kwikon Shallow Slab Boxes with Molded Connectors – Volume 36 cu in.

KWIKON SQUARE SLAB BOXES

Kwikon Shallow Slab Boxes with Molded Connectors – Volume 44 cu in.

(without Molded Connectors) – Volume 44 cu in.

Kwikon Slab Boxes with Knockouts

Kwikon Slab Boxes with Molded Connectors – Volume 44 cu in.

KWIKON STANDARD SLAB BOXES

Size

(inches)

Part

Number

Product

Code

8 x 1/2 SMB-H-10 089465

8 x 3/4 SMB-H-15 089462

4 x 1/2, 4 x 3/4 SMB-H-10/15 089458

4 x 1/2, 2 x 3/4 , 2 x 1 SMB-H-10/20 089466

4 x 3/4 , 4 x 1 SMB-H-15/20 089464

Size

(inches)

Part

Number

Product

Code

8 x 1/2 SMB-10 089460

4 x 1/2, 2 x 3/4 , 2 x 1 SMB-10/20 089461

Size

(inches)

Part

Number

Product

Code

8 x 1/2 SMBS-H-10 089480

8 x 3/4 SMBS-H-15 089482

4 x 1/2, 4 x 3/4 SMBS-H-10/15 089481

4 x 1/2, 2 x 3/4 , 2 x 1 SMBS-H-10/20 089483

4 x 3/4 , 4 x 1 SMBS-H-15/20 089484

Size

(inches)

Part

Number

Product

Code

8 x 1/2 SMBS-10 089490

4 x 1/2, 2 x 3/4 , 2 x 1 SMBS-10/20 089491

FEATURES

■Approved for support of ceiling fans up to 35

lbs. and luminaries up to 50 lbs.

■Concrete-tight.

■All molded connectors have 360°

locking tabs that exceed UL and CSA

requirements for pull-out.

■Manufactured from high-impact PVC.

■Nonmetallic/non-conducting/

non-corroding.

■Threaded brass inserts. (10/32 for ceiling

fans, 8/32 for luminaries).

■Supplied as a fully assembled one piece unit.

■A polyester film sealing the box opening to

prevent possible infiltration during the our.

FEATURES

■Threaded brass inserts (10/32 for ceiling

fans, 8/32 for luminaires).

■Approval for support of ceiling fans up to 35

lbs and luminaires up to 50 lbs.

■Overall height of box (2-7/8") allows for use

in thinner slabs.

■A polyester film sealing the box opening to

prevent possible infiltration during the pour.

Size

(inches)

Part

Number

Product

Code

8 x 1/2 SSBH-10 089467

8 x 3/4 SSBH-15 089468

4 x 1/2, 4 x 3/4 SSBH-10/15 089469

4 x 1/2, 2 x 3/4 , 2 x 1 SSBH-10/20 089474

4 x 3/4 , 4 x 1 SSBH-15/20 089475

FEATURES

■Direct mounting of 4" square covers and

plaster rings.

■Mounting feet are located on corners for

quicker positioning and securing to form.

■Standard dimension 2-gang cover plates

cover all exposed surfaces.

■A polyester film sealing the box opening to

prevent possible infiltration during the pour.

Kwikon Slab Boxes with Knockouts

Kwikon Slab Boxes with Molded Connectors

KWIKON SLAB BOX ASSEMBLY FOR USE WITH PLASTER RINGS

Adjusts height of SMB/SMBH series slab boxes by 1"

KWIKON SLAB BOX EXTENSION RING

Part

Number

Product

Code

SMBR 089494

■Easily installed.

■Quickly adjusts to new height.

EXTENSION RING FEATURES

Size

(inches)

Part

Number

Product

Code

8 x 1/2 MBH-10 089022

8 x 3/4 MBH-15 089018

4 x 1/2, 4 x 3/4 MBH-10/15 089020

4 x 1/2, 2 x 3/4 , 2 x 1 MBH-10/20 089019

4 x 3/4 , 4 x 1 MBH-15/20 089021

FEATURES

■Approved for support of ceiling fans up to 35

lbs. and luminaries up to 50 lbs.

■Slab box assemblies are supplied without the

collar - ready to accept the desired raised

cover/plaster ring.

■Plaster rings mount directly to the box

opening using the screws supplied.

■Used with raised covers, boxes are perfect for

use in shear wall or block construction for

wall mounted fixtures and devices.

Size

(inches)

Part

Number

Product

Code

8 x 1/2 MB-10 089017

4 x 1/2, 2 x 3/4 , 2 x 1 MB-10/20 089016

Size

(inches)

Part

Number

Product

Code

4 x 1/2, 4 x 3/4 SVDB-H-10/15 089496

4 x 3/4, 4 x 1 SVDB-H-15/20 089049

4 x 1/2, 2 x 3/4, 2 x 1 SVDB-H-10/20 089052

8 x 3/4 SVDB-H-15 089065

FEATURES

■Fully assembled and installation ready

■Perfectly suited for deep or shallow

construction preferences

■Kwikon hubs do not protrude inside the box

■Concrete-tight poly film covering the box

opening

3-1/2" Deep Boxes

KWIKON CONCRETE WALL BOXES

Size

(inches)

Part

Number

Product

Code

4 x 1/2 SVSB-H-10 089054

4 x 3/4 SVSB-H-15 089053

2" Shallow Boxes

SLAB BOXES

NEW

NEW

Description Part

Number

Product

Code

Cutting Tool 1/2" – 1" CLC20 088210

Cutting Tool 1/2" – 2" CLC35 088915

Replacement Blade for CLC20 SSB 088211

Replacement Blade for CLC35 SB35 088916

PRODUCT CATALOG

KRCD-2-10

KFC-10

KWBC-10

KVP

KDSB-2-10 KRC-10

KRC-15

KSB-10/15

ENT WALL BOXES, CEILING BOXES,

PLASTER RINGS & COVERS CUTTING TOOL

KRCD-2-15

KCB-10

Description Part

Number

Product

Code

Ceiling Box 2-1/16" Deep KCB-10 089506

4" Set-Up Box 2-1/16" Deep KDCB-10/15 089507

Switch Box 3-1/16" Deep KSB-10/15 089508

4" Square Box 1-1/2" Deep KDSB-2-10 089509

4" Square Box 2-1/8" Deep KDSB-2-10/15 089510

Raised 1/2" Single Device KRC-10 089501

Raised 5/8" Single Device KRC-15 089502

Raised 1/2" Two Devices KRCD-2-10 089503

Raised 5/8" Two Devices KRCD-2-15 089504

Round Flat Cover, 1/2" KO KFC-10 089505

Square Flat Cover, 1/2" KO KWBC-10 089500

Voltage Partition KVP 089512

KDCB-10/15

KDSB-2-10/15

KWIKON ENT ANGLED FORM STUBBIES

KWIKON ENT FORM STUBBIES

KWIKON ENT MULTI-LINK FORM STUBBIES

Size

(inches)

Part

Number

Product

Code

1/2 MSTB-10 089031

3/4 MSTB-15 089026

1 MSTB-20 089025

Size

(inches)

Part

Number

Product

Code

1/2 KSTB-10 089330

3/4 KSTB-15 089331

1 KSTB-20 089332

1-1/4 KSTB-25 089333

Size

(inches)

Part

Number Product Code

1/2 KASTB-10 089233

3/4 KASTB-15 089234

1 KASTB-20 089235

1-1/4 KASTB-25 089236

1-1/2 KASTB-30 089238

DESCRIPTION

Ease and convenience were a priority in the design

of Kwikon ENT form stubbies. Contractors use our

stubbies to create conduit stub-downs in concrete

without needing to drill holes in the plywood form.

Available in the original stubby design, the angled

version and the Multi-Link, Kwikon form stubbies

also protect the ENT from potential damage during

the removal of wood forms.

The angled stubby gives you the advantage of

positioning the ENT at a lower profile within the

slab. It’s available in all sizes of ENT up to 1-1/2".

The Multi-Link form stubby is designed in convenient

rows of three and feature a snap-together design

which enables them to be configured in a variety of

tightly grouped formations. It also features a thin

removable film over the drop opening that prevents

concrete slurry from seeping under the stubby during

the concrete pour.

ENT FORM STUBBIES

ACCESSORIES

1.1 REFERENCES

A.Standards referred to in this section are:

1. UL 1653 Electrical Nonmetallic Tubing.

2. NEMA TC-13 Electrical Nonmetallic Tubing.

2.1 MANUFACTURERS

A. Acceptable manufacturers are listed below

1. Electrical Nonmetallic Tubing:

a. Kwikon by IPEX

2. Electrical Nonmetallic Tubing Fittings:

a. Kwikon by IPEX

3. Electrical Nonmetallic Tubing Boxes:

a. Kwikon by IPEX

B. All ENT tubing, ENT fittings, ENT boxes and accessories

shall be manufactured by the same company so as to form

a complete ENT system.

C. ENT systems shall be approved for use in fire resistance

rated concrete floor-ceiling assemblies with fire resistance

ratings up to 4 hours.

2.2 RACEWAYS

A. ENT raceway shall be color coded to indicate the wiring

system. Blue stripe for power, red stripe for fire

alarm/emergency systems and yellow stripe for

data/communications.

B. ENT raceway shall be listed to UL1653 and manufactured

in accordance with NEMA TC-13.

2.3 FITTINGS

A. ENT Fittings shall be manufactured of high-impact PVC

B. ENT Fittings shall meet the following requirements:

1. Six locking tabs located every 60oproviding 360ocontact.

2. Locking tabs shall provide a conduit pull-out of a

minimum 175 ft-lb force.

3. Concrete-tight without the need for taping.

4. When transitioning to EMT conduit, the transition fitting

shall have six locking tabs for ENT connection and

set-screw connection for EMT.

2.4 BOXES

A. ENT boxes shall be manufactured of high-impact PVC

B. ENT Slab Box and Wall Box requirements:

1. Slab Boxes shall be approved for the purpose and

concrete-tight.

2. Round Slab Boxes shall be approved for use with

luminaires up to 50 lbs and ceiling fans up to 35 lbs.

3. Round Slab Boxes shall have threaded brass inserts for

the attachment of luminaires or ceiling fans.

4. Slab Boxes shall have eight (8) integrally molded ENT

hub connectors with six locking tabs for ENT raceway

connection.

3.1 INSTALLATION

A. ENT raceways, fittings, boxes and accessories shall be

installed in accordance with Article 362 of the 2002

National Electrical Code.

B. Where ENT penetrates a fire-rated wall, floor or ceiling

assembly, an approved firestop system as listed in

Underwriters Laboratories Building Materials Directory or

other nationally recognized testing laboratory shall be used.

Section 16110 Electrical Raceway Systems

PART 2: PRODUCTS

PART 3: INSTALLATION

PART 1: GENERAL

SUGGESTED SPECIFICATI0NS

This literature is published in good faith and is believed to be reliable. However, it

does not represent and/or warrant in any manner the information and suggestions

contained in this brochure. Data presented is the result of laboratory tests and field

experience.

A policy of ongoing product improvement is maintained. This may result in

modifications of features and/or specifications without notice.

CUSTOMER SERVICE CENTER

U.S. Customers call

IPEX USA LLC

Toll free: (800) 463-9572

www.ipexamerica.com

About the IPEX Group of Companies

As leading suppliers of thermoplastic piping systems, the IPEX Group of Companies

provides our customers with some of the world’s largest and most comprehensive

product lines. All IPEX products are backed by more than 50 years of experience.

With state-of-the-art manufacturing facilities and distribution centers across North

America, we have established a reputation for product innovation, quality, end-user

focus and performance.

Markets served by IPEX group products are:

•Electrical systems

•Telecommunications and utility piping systems

•PVC, CPVC, PP, ABS, PEX, FR-PVDF and PE pipe and fittings (1/4" to 48")

•Industrial process piping systems

•Municipal pressure and gravity piping systems

•Plumbing and mechanical piping systems

•PE Electrofusion systems for gas and water

•Industrial, plumbing and electrical cements

•Irrigation systems

BRELKKIP090905R © 2009 IPEX EL0027U

Products are manufactured by IPEX Electrical Inc. and distributed in the

United States by IPEX USA LLC.

Kwikon®is a trademark of IPEX Branding Inc.