105394 Catalog
2014-07-05
: Pdf 105394-Catalog 105394-Catalog 003914 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 32
Download | |
Open PDF In Browser | View PDF |
CATALOG INNERDUCT & CUSTOM ARMOR PRODUCT CATALOG CPID • Protect-N-Duct™ Innerduct • Single & Dual Wall Kortech® • HDPE Solid Wall • Accessories A PART OF 1 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Solutions That Work Eastern Wire + Conduit™ products provide high quality cable protection to a vast array of fiber optic and telecommunication industries, including health care, education and manufacturing. Eastern Wire + Conduit™ pioneered the development of specialty protection identification products and services, especially with regards to optical fiber and UTP copper cables. Due to our dedication to Engineering, Eastern products are made in the Product Innovation, Quality and USA from global sourced raw materials. Customer Service Support – we We have brought together innovation have earned your trust. Your partner and engineering in our quality in raceway protection – Eastern controlled factories to manufacture Wire + Conduit. outstanding protective raceways. Recently, we have introduced several new products such as Armor-Duct™, Armor-FP™, Cable-N-Conduit (CIC), Toneable Duct and Multi-Duct to our product line. Disclaimer and Standard Warranty on inside back cover. 2 www.easternwire.com Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Catalog Content Table of Contents and Table of Contents 2 3 Protect-N-Duct™ – Specifications Plenum Innerduct & Fittings 4-6 Riser Innerduct & Fittings 7-9 Multi-Purpose Innerduct 10-11 HDPE SOLID WALL – Specifications HDPE Solid Wall & Fittings 12 - 14 SDR 11 15 SDR 13.5 16 SDR 15.5 17 SDR 17 18 Schedule 40 19 Schedule 80 20 KORTECH® – Specifications Single Wall KORTECH® & Fittings 21-22 Dual Wall KORTECH® & Fittings 23-24 Specialty Products & Services Armor-Duct™ 25 Low Smoke - Zero Halogen CPID 26 27 - 28 Bundling & Special Packaging 29 Handling and Installation 30 Disclaimer 31 Warranty 31 Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 3 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Plenum Description • Corrugated flexible plenum innerduct rated FT6, with standard pull tape • Extremely lightweight, allowing easier handling and less expensive installation equipment Application • Corrugated flexible innerduct ETL listed & CSA certified for applications in Optical Fiber/ Communication Cable Raceway systems Colors • Available in orange, white, yellow and blue Corrugated Wall O.D. I.D. Pull Tape/Rope Markings • Eastern Wire + Conduit • Protect-N-Duct Plenum • Optical Fiber/Communication Raceway • FT 6 • ETL logo • Date of Manufacture • Sequential length markings Dimensions INNERDUCT – PLENUM Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Inside Diameter (I.D.) in (mm) 0.774 - 0.834 (19.66 - 21.18) 0.999 - 1.059 (25.40 - 26.90) 1.328 - 1.392 (33.73 - 35.36) 1.558 - 1.622 (39.57 - 41.20) 2.015 - 2.079 (51.18 - 52.81) Disclaimer and Standard Warranty on inside back cover. 4 www.easternwire.com Outside Diameter (O.D.) in. (mm) 1.020 - 1.060 (25.91 - 26.92) 1.285 - 1.325 (32.64 - 33.65) 1.628 - 1.672 (41.35 - 42.47) 1.868 - 1.912 (47.45 - 48.56) 2.323 - 2.387 (59.00 - 60.63) Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Plenum Specification Description • • An extremely lightweight non-metallic corrugated flexible innerduct For use as Raceway for Optical Fiber and Communication Cables in Plenum applications Reference & Ratings • • • Plenum – FT6 rated ETL Listed to UL 2024 (Signaling, Optical Fiber and Communications, Raceways and Cable Routing Assemblies) CSA Certified to CSA C22.2 No. 262-04 (Optical fiber and communication cable raceway systems) INNERDUCT – PLENUM – REELS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) 1.040 1.040 1.305 1.305 1.305 1.305 1.305 1.305 1.305 1.650 1.650 1.650 1.650 1.650 1.650 1.650 1.890 1.890 1.890 1.890 1.890 2.355 2.355 2.355 2.355 0.090 0.090 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.215 0.215 0.215 0.215 0.215 0.240 0.240 0.240 0.240 Weight (lbs/Full Reel) 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 2” 2” 2” 2” • • • • PDPU0750F1000R PDPU0750F5000R PDPU1000F0500R PDPU1000F1000R PDPU1000F2000R PDPU1000F2500R PDPU1000F3000R PDPU1000F5000R PDPU1000F8000R PDPU1250F0500R PDPU1250F1000R PDPU1250F1500R PDPU1250F2000R PDPU1250F3200R PDPU1250F4000R PDPU1250F5000R PDPU1500F0700R PDPU1500F1000R PDPU1500F2000R PDPU1500F2500R PDPU1500F4000R PDPU2000F0500R PDPU2000F0700R PDPU2000F1000R PDPU2000F2000R 200# 200# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 1000 5000 500 1000 2000 2500 3000 5000 8000 500 1000 1500 2000 3200 4000 5000 700 1000 2000 2500 4000 500 700 1000 2000 0.804 0.804 1.029 1.029 1.029 1.029 1.029 1.029 1.029 1.360 1.360 1.360 1.360 1.360 1.360 1.360 1.590 1.590 1.590 1.590 1.590 2.047 2.047 2.047 2.047 170 570 125 175 300 365 440 700 1050 153 255 353 460 685 840 1015 231 300 550 656 1010 220 268 350 630 Plenum Innerduct is standard Orange or White. Special Colors and Put ups are available on request. Split Plenum Innerduct is available on request. Products in Bold are stock items. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 5 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Plenum INNERDUCT – PLENUM – COILS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) Weight (lbs/Full Reel) 3/4” PDPU0750F0250C 200# 3/4” PDPU0750F0500C 200# 1” PDPU1000F0250C 900# 1 1/4” PDPU1250F0200C 900# 1 1/2” PDPU1500F0150C 900# 1 1/2” PDPU1500F0350C 900# 2” PDPU2000F0100C 900# 2” PDPU2000F0250C 900# • 250 500 250 200 150 350 100 250 0.804 0.804 1.029 1.360 1.590 1.590 2.047 2.047 Specialty Coils are available on request. INNERDUCT – PLENUM – SNAP COUPLING FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFCSP0750 PFCSP1000 PFCSP1250 PFCSP1500 PFCSP2000 Carton Qty 50 50 50 40 15 INNERDUCT – PLENUM – SNAP THREADED TA FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFTTP0750 PFTTP1000 PFTTP1250 PFTTP1500 PFTTP2000 . Disclaimer and Standard Warranty on inside back cover. 6 www.easternwire.com Carton Qty 50 50 50 50 25 1.040 1.040 1.305 1.650 1.890 1.890 2.355 2.355 0.090 0.090 0.110 0.175 0.215 0.215 0.240 0.240 23 45 28 35 32 75 24 60 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Riser Description • Corrugated flexible riser innerduct rated FT4, with standard pull rope or tape. Lightweight, allowing easier handling and less expensive installation equipment. Application • Corrugated flexible innerduct UL listed & CSA certified listed for applications in Optical Fiber/ Communication Cable Raceway systems. Suitable for use for use as Raceway for Optical and Communication Cables in vertical runs in a shaft or between floors. Corrugated PVC Wall O.D. I.D. Pull Tape/Rope Colors • Available in white, orange, yellow, blue, green, red, and gray. Markings • Eastern Wire + Conduit • Protect-N-Duct Riser • Optical Fiber/Communication Raceway • FT 4 • CSA & UL logo • Date of Manufacture • Sequential length markings Dimensions INNERDUCT – RISER Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Inside Diameter (I.D.) in (mm) 0.774 - 0.834 (19.66 - 21.18) 0.999 - 1.059 (25.40 - 26.90) 1.328 - 1.392 (33.73 - 35.36) 1.558 - 1.622 (39.57 - 41.20) 2.015 - 2.079 (51.18 - 52.81) Outside Diameter (O.D.) in. (mm) 1.020 - 1.060 (25.91 - 26.92) 1.285 - 1.325 (32.64 - 33.65) 1.628 - 1.672 (41.35 - 42.47) 1.868 - 1.912 (47.45 - 48.56) 2.323 - 2.387 (59.00 - 60.63) O.D. I.D. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 7 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Riser Specification Description • • A strong and lightweight non-metallic corrugated flexible innerduct For use as Raceway for Optical Fiber and Communication Cables in vertical shaft runs or between floors Reference & Ratings • • • Riser – FT4 rated UL Listed to 2024 (Signaling, Optical Fiber and Communications, Raceways and Cable Routing Assemblies) CSA Certified to CSA C22.2 No. 262-04 (Optical Fiber and Communication Cable Raceway systems) INNERDUCT – RISER – REELS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) 1.040 1.305 1.305 1.305 1.305 1.305 1.305 1.305 1.650 1.650 1.650 1.650 1.650 1.650 1.650 1.890 1.890 1.890 1.890 1.890 2.355 2.355 2.355 2.355 0.090 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.230 0.230 0.230 0.230 0.230 0.260 0.260 0.260 0.260 Weight (lbs/Full Reel) 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 2” 2” 2” 2” PDRU0750F1000R PDRU0750F500R PDRU1000F1000R PDRU1000F2000R PDRU1000F2500R PDRU1000F3000R PDRU1000F5000R PDRU1000F8000R PDRU1250F0500R PDRU1250F1000R PDRU1250F1500R PDRU1250F2000R PDRU1250F3200R PDRU1250F4000R PDRU1250F5000R PDRU1500F0700R PDRU1500F1000R PDRU1500F2000R PDRU1500F2500R PDRU1500F4000R PDRU2000F0500R PDRU2000F0700R PDRU2000F1000R PDRU2000F2000R 200# 200# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 1000 500 1000 2000 2500 3000 5000 8000 500 1000 1500 2000 3200 4000 5000 700 1000 2000 2500 4000 500 700 1000 2000 0.804 1.029 1.029 1.029 1.029 1.029 1.029 1.029 1.360 1.360 1.360 1.360 1.360 1.360 1.360 1.590 1.590 1.590 1.590 1.590 2.047 2.047 2.047 2.047 • • • • Riser Innerduct is standard Orange. Special Colors and Put ups are available on request. For halogen free products contact your Sales Agent or customer service. Products in Bold are stock items. Disclaimer and Standard Warranty on inside back cover. 8 www.easternwire.com 170 125 175 300 365 440 700 1050 153 255 353 460 685 840 1015 245 320 590 706 1090 235 289 380 690 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Riser INNERDUCT – RISER – COILS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) Weight (lbs/Full Reel) 3/4” PDRU0750F0250C 200# 3/4” PDRU0750F0500C 200# 1” PDRU1000F0250C 900# 1 1/4” PDRU1250F0200C 900# 1 1/2” PDRU1500F0150C 900# 1 1/2” PDRU1500F0350C 900# 2” PDRU2000F0100C 900# 2” PDRU2000F0250C 900# • 250 500 250 200 150 350 100 250 0.804 0.804 1.029 1.360 1.590 1.590 2.047 2.047 1.040 1.040 1.305 1.650 1.890 1.890 2.355 2.355 0.090 0.090 0.110 0.175 0.230 0.230 0.260 0.260 23 45 28 35 35 81 26 65 Specialty Coils are available on request. INNERDUCT – RISER – SNAP COUPLING FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFCSR0750 PFCSR1000 PFCSR1250 PFCSR1500 PFCSR2000 Carton Qty 50 50 50 40 15 INNERDUCT – RISER – SNAP THREADED TA FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFTTR0750 PFTTR1000 PFTTR1250 PFTTR1500 PFTTR2000 Carton Qty 50 50 50 50 25 . Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 9 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Multi-Purpose Description • Corrugated flexible multi-purpose innerduct, with standard pull rope or tape. Lightweight, allowing easier handling and less expensive installation equipment. Application • Corrugated flexible innerduct UL listed & CSA certified for applications in Optical Fiber/ Communication Cable Raceway systems. Suitable for use for use as Raceway for Optical and Communication Cables in vertical runs in a shaft or between floors. Corrugated PVC Wall O.D. I.D. Pull Tape/Rope Colors • Available in gray. Markings • Eastern Wire + Conduit • Protect-N-Duct Multi-Purpose • Optical Fiber/Communication Raceway • CSA & UL logo • Date of Manufacture • Sequential length markings Dimensions INNERDUCT – RISER Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Inside Diameter (I.D.) in (mm) Outside Diameter (O.D.) in. (mm) 0.774 - 0.834 (19.66 - 21.18) 0.999 - 1.059 (25.40 - 26.90) 1.328 - 1.392 (33.73 - 35.36) 1.558 - 1.622 (39.57 - 41.20) 2.015 - 2.079 (51.18 - 52.81) 1.020 - 1.060 (25.91 - 26.92) 1.285 - 1.325 (32.64 - 33.65) 1.628 - 1.672 (41.35 - 42.47) 1.868 - 1.912 (47.45 - 48.56) 2.323 - 2.387 (59.00 - 60.63) INNERDUCT – MULTI-PURPOSE – COILS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) Weight (lbs/Full Reel) 3/4” PDGU0750F0250C 200# 3/4” PDGU0750F0500C 200# 1” PDGU1000F0250C 900# 1 1/4” PDGU1250F0200C 900# 1 1/2” PDGU1500F0150C 900# 1 1/2” PDGU1500F0350C 900# 2” PDGU2000F0100C 900# 2” PDGU2000F0250C 900# • Specialty Coils are available on request. Disclaimer and Standard Warranty on inside back cover. 10 www.easternwire.com 250 500 250 200 150 350 100 250 0.804 0.804 1.029 1.360 1.590 1.590 2.047 2.047 1.040 1.040 1.305 1.650 1.890 1.890 2.355 2.355 0.090 23 0.090 45 0.110 28 0.175 35 0.230 35 0.230 81 0.260 26 0.260 O.D. I.D.65 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct™ – Multi-Purpose Specification Description • • A strong and lightweight non-metallic corrugated flexible innerduct For use as Raceway for Optical Fiber and Communication Cables in vertical shaft runs or between floors Reference & Ratings • • UL Listed to 2024 (Signaling, Optical Fiber and Communications, Raceways and Cable Routing Assemblies) CSA Certified to CSA C22.2 No. 262-04 (Optical Fiber and Communication Cable Raceway systems) INNERDUCT – MULTI-PURPOSE – REELS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) 1.040 1.305 1.305 1.305 1.305 1.305 1.305 1.305 1.650 1.650 1.650 1.650 1.650 1.650 1.650 1.890 1.890 1.890 1.890 1.890 2.355 2.355 2.355 2.355 0.090 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.230 0.230 0.230 0.230 0.230 0.260 0.260 0.260 0.260 Weight (lbs/Full Reel) 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 2” 2” 2” 2” PDGU0750F1000R PDGU0750F500R PDGU1000F1000R PDGU1000F2000R PDGU1000F2500R PDGU1000F3000R PDGU1000F5000R PDGU1000F8000R PDGU1250F0500R PDGU1250F1000R PDGU1250F1500R PDGU1250F2000R PDGU1250F3200R PDGU1250F4000R PDGU1250F5000R PDGU1500F0700R PDGU1500F1000R PDGU1500F2000R PDGU1500F2500R PDGU1500F4000R PDGU2000F0500R PDGU2000F0700R PDGU2000F1000R PDGU2000F2000R 200# 200# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 900# 1000 500 1000 2000 2500 3000 5000 8000 500 1000 1500 2000 3200 4000 5000 700 1000 2000 2500 4000 500 700 1000 2000 0.804 1.029 1.029 1.029 1.029 1.029 1.029 1.029 1.360 1.360 1.360 1.360 1.360 1.360 1.360 1.590 1.590 1.590 1.590 1.590 2.047 2.047 2.047 2.047 170 125 175 300 365 440 700 1050 153 255 353 460 685 840 1015 245 320 590 706 1090 235 289 380 690 Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 11 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE Solid Wall Specification Description • • • • • • Smooth solid wall Can be trenched or bi-directional drilled Eliminates need for bends and elbows Large master reels requiring less joints for improved system integrity Available in SCH 40 & SCH 80, SDR 17, 15.5, 13.5, 11 & 9 Available with a ribbed inner wall or an inner wall with a friction reducing additive • Available with Pull Tape HIGH DENSITY POLYETHYLENE PIPE – SDR 9 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) Wall (Inches) Weight (lbs/foot) 1.003 1.270 1.452 1.816 2.198 2.676 3.440 0.146 0.184 0.211 0.264 0.319 0.389 0.500 0.235 0.372 0.488 0.762 1.117 1.655 2.737 Wall (Inches) Weight (lbs/foot) 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” PDVN1000 PDVN1250 PDVN1500 PDVN2000 PDVN2500 PDVN3000 PDVN4000 1.315 1.660 1.900 2.375 2.875 3.500 4.500 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape HIGH DENSITY POLYETHYLENE PIPE – SDR 11 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) 1/2” PDXN0500 0.840 3/4” PDXN0750 1.050 1” PDXN1000 1.315 1 1/4” PDXN1250 1.660 1 1/2” PDXN1500 1.900 2” PDXN2000 2.375 2 1/2” PDXN2500 2.875 3” PDXN3000 3.500 4” PDXN4000 4.500 5” PDXN5000 5.562 0.667 0.839 1.051 1.338 1.534 1.917 2.321 2.825 3.633 4.490 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape Disclaimer and Standard Warranty on inside back cover. 12 www.easternwire.com 0.076 0.085 0.095 0.130 0.120 0.200 0.151 0.314 0.173 0.409 0.216 0.639 0.261 0.936 0.318 1.387 0.409 2.293 0.506 3.505 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE Solid Wall HIGH DENSITY POLYETHYLENE PIPE – SDR 13.5 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) Wall (Inches) Weight (lbs/foot) 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” PDYN0500 PDYN0750 PDYN1000 PDYN1250 PDYN1500 PDYN2000 PDYN2500 PDYN3000 PDYN4000 PDYN5000 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 5.562 0.696 0.874 1.100 1.394 1.599 2.002 2.424 2.951 3.794 4.689 0.062 0.078 0.097 0.123 0.141 0.176 0.213 0.259 0.333 0.412 0.072 0.110 0.169 0.264 0.343 0.531 0.778 1.153 1.906 2.912 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe. Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape. HIGH DENSITY POLYETHYLENE PIPE – SDR 15.5 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) Wall (Inches) Weight (lbs/foot) 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” 5” PDZN0750 PDZN1000 PDZN1250 PDZN1500 PDZN2000 PDZN3000 PDZN4000 PDZN5000 1.050 1.315 1.660 1.900 2.375 3.500 4.500 5.562 0.895 1.147 1.426 1.635 2.049 3.021 3.885 4.801 0.068 0.084 0.107 0.123 0.153 0.226 0.290 0.359 0.098 0.151 0.235 0.305 0.469 1.105 1.678 2.563 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe. Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape. HIGH DENSITY POLYETHYLENE PIPE – SDR 17 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) Wall (Inches) Weight (lbs/foot) 3/4” 1” 1 1/4” 1 1/2” 2” PDUN0750 PDUN1000 PDUN1250 PDUN1500 PDUN2000 1.050 1.315 1.660 1.900 2.375 0.906 1.140 1.445 1.656 2.095 0.062 0.077 0.098 0.112 0.140 0.092 0.139 0.217 0.282 0.433 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe. Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 13 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE Solid Wall HIGH DENSITY POLYETHYLENE PIPE – Schedule 40 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. (Inches) Wall (Inches) Weight (lbs/foot) 0.113 0.133 0.140 0.145 0.154 0.203 0.216 0.285 0.258 0.148 0.218 0.295 0.352 0.472 0.774 0.974 1.649 1.904 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” PDAN0750 PDAN1000 PDAN1250 PDAN1500 PDAN2000 PDAN2500 PDAN3000 PDAN4000 PDAN5000 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 5.562 0.804 1.029 1.360 1.590 2.047 2.445 3.042 3.896 5.046 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe. Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape. HIGH DENSITY POLYETHYLENE PIPE – Schedule 80 Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size Average O.D. (Inches) Average I.D. Wall (Inches) (Inches) Weight (lbs/foot) 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” PDBN0750 PDBN1000 PDBN1250 PDBN1500 PDBN2000 PDBN2500 PDBN3000 PDBN4000 PDBN5000 PDBN6000 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 5.562 6.625 0.722 0.164 0.937 0.189 1.255 0.191 1.476 0.200 1.913 0.218 2.290 0.276 2.864 0.300 3.786 0.337 4.812 0.375 5.507 0.476 0.189 0.277 0.384 0.465 0.644 0.983 1.316 1.950 2.621 3.876 Dimensional Specifications conform to ASTM D3035 and F2160 for O.D. controlled pipe. Available with 200#, 400#, 900#, 1250# or 1800# Pull Tape. COMPRESSION COUPLING FITTINGS Trade Size Part Number Carton Qty 1/2” PFCHC0500 As required 3/4” PFCHC0750 As required 1” PFCHC1000 As required 1 1/4” PFCHC1250 As required 1 1/2” PFCHC1500 As required 2” PFCHC2000 As required 3” PFCHC3000 As required COMPRESSION PLUG Trade Size Part Number 1/2” PFPHC0500 3/4” PFPHC0750 1” PFPHC1000 1 1/4” PFPHC1250 1 1/2” PFPHC1500 2” PFPHC2000 3” PFPHC3000 . Disclaimer and Standard Warranty on inside back cover. 14 www.easternwire.com Carton Qty As required As required As required As required As required As required As required Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SDR 11 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Availability • HDPE SDR 11 conduit is available in 4 inner-wall forms: Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • UV stabilization additive • Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE SDR 11 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM D 3035. Nominal Size in (mm) 1/2 (16) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) Outside Diameter (O.D.) in (mm) 0.836 - 0.844 (21.24 - 21.44) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) Wall Thickness in. (mm) 0.076 - 0.096 (1.93 - 2.44) 0.095 - 0.115 (2.41 - 2.92) 0.120 - 0.140 (3.05 - 3.56) 0.151 - 0.171 (3.84 - 4.35) 0.173 - 0.194 (4.39 - 4.92) 0.216 - 0.242 (5.49 - 6.15) 0.318 - 0.356 (8.08 - 9.05) 0.409 - 0.458 (10.39 - 11.63) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 15 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SDR 13.5 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. Availability • HDPE SDR 11 conduit is available in 4 inner-wall forms: • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • • UV stabilization additive Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE SDR 13.5 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM D 3035. Trade Size Inside Diameter (I.D.) in (mm) 1/2 (16) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) 0.836 - 0.844 (21.24 - 21.44) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. 16 www.easternwire.com Outside Diameter (O.D.) in. (mm) 0.076 - 0.096 (1.93 - 2.44) 0.078 - 0.098 (1.98 - 2.49) 0.097 - 0.117 (2.46 - 2.97) 0.123 - 0.143 (3.12 - 3.63) 0.141 - 0.161 (3.58 - 4.09) 0.176 - 0.197 (4.47 - 5.00) 0.259 - 0.290 (6.58 - 7.37) 0.333 - 0.373 (8.46 - 9.48) Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SDR 15.5 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Availability • HDPE SDR 15.5 conduit is available in 4 inner-wall forms: Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • • UV stabilization additive Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE SDR 15.5 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM D 3035. Nominal Size in (mm) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) Outside Diameter (O.D.) in (mm) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) Wall Thickness in. (mm) 0.068 - 0.088 (1.73 - 2.24) 0.084 - 0.104 (2.13 - 2.64) 0.107 - 0.127 (2.72 - 3.23) 0.123 - 0.143 (3.12 - 3.63) 0.153 - 0.173 (3.89 - 4.40) 0.226 - 0.253 (5.74 - 6.43) 0.290 - 0.325 (7.37 - 8.26) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 17 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SDR 17 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Availability • HDPE SDR 17 conduit is available in 4 inner-wall forms: Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • • UV stabilization additive Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE SDR 17 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM D 3035. Nominal Size in (mm) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) Outside Diameter (O.D.) in (mm) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. 18 www.easternwire.com Wall Thickness in. (mm) 0.062 - 0.082 (1.57 - 2.08) 0.077 - 0.097 (1.96 - 2.47) 0.098 - 0.118 (2.49 - 3.00) 0.112 - 0.132 (2.84 - 3.35) 0.140 - 0.160 (3.56 - 4.07) 0.206 - 0.231 (5.23 - 5.87) 0.265 - 0.297 (6.73 - 7.54) Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SCH 40 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Availability • HDPE Schedule 40 conduit is available in 4 inner-wall forms: Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • • UV stabilization additive Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE SDR Schedule 40 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM F 2160. Nominal Size in (mm) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) 5 (129) Outside Diameter (O.D.) in (mm) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) 5.553 -5.573 (141.05 - 141.55) Wall Thickness in. (mm) 0.113 - 0.133 (2.80 - 3.38) 0.133 - 0.153 (3.38 - 3.89) 0.140 - 0.160 (3.56 - 4.06) 0.145 - 0.165 (3.68 - 4.20) 0.154 - 0.174 (3.91 - 4.42) 0.216 - 0.242 (5.49 - 6.15) 0.237 - 0.265 (6.02 - 6.73) 0.258 - 0.289 (6.55 - 7.34) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 19 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog HDPE – Solid Wall SCH 80 Specifications Description • A multi-purpose smooth solid wall continuous length conduit. Availability • HDPE Schedule 80 conduit is available in 4 inner-wall forms: Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in a variety of colors. • SMOOTH • RIBBED • ENHANCED smooth • ENHANCED ribbed – available in sizes 1” – 2” Additives • • UV stabilization additive Friction reducing additive in PE compound Markings • Eastern Wire + Conduit • HDPE Schedule 80 • Date of Manufacture • Sequential length markings (May be altered upon request) Durability • HDPE provides a conduit of high tensile and compression strength. Dimensions • Dimensions for this product as per ASTM F 2160. Nominal Size in (mm) 3/4 (21) 1 (27) 1 1/4” (35) 1 1/2” (41) 2 (53) 3 (78) 4 (103) Outside Diameter (O.D.) in (mm) 1.046 - 1.054 (26.60 - 26.80) 1.310 - 1.320 (33.27 - 33.53) 1.655 - 1.665 (42.07 - 42.33) 1.894 - 1.906 (48.15 - 48.45) 2.369 - 2.381 (60.15 - 60.45) 3.492 - 3.508 (88.70 - 89.10) 4.491 - 4.509 (114.07 - 114.53) *Some conduit ovality may occur. Disclaimer and Standard Warranty on inside back cover. 20 www.easternwire.com Wall Thickness in. (mm) 0.154 - 0.174 (3.91 - 4.42) 0.179 - 0.200 (4.55 - 5.08) 0.191 - 0.214 (4.85 - 5.44) 0.200 - 0.224 (5.08 - 5.69) 0.218 - 0.244 (5.54 - 6.20) 0.300 - 0.336 (7.62 - 8.53) 0.337 - 0.377 (8.56 - 9.58) Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Kortech® – Single Wall Description • A corrugated continuous length conduit with pull rope. Material • High density polyethylene (HDPE) resin. Certification • Under Eastern’s Quality Assurance System. Colors • Available in black, blue, green, gray, orange, purple, red and yellow. Markings • Eastern Wire + Conduit • Trade Size • Single Wall Kortech • HDPE • Date of Manufacture • Sequential length markings Corrugated Wall O.D. I.D. Pull Tape/Rope Additives • UV stabilization additive INNERDUCT – Single Wall Kortech™ Trade Size 3/4” (21) 1” (27) 1 1/4” (35) 1 1/2” (41) 2” (53) Inside Diameter (I.D.) in (mm) 0.774 - 0.834 (19.66 - 21.18) 0.999 - 1.059 (25.40 - 26.90) 1.328 - 1.392 (33.73 - 35.36) 1.558 - 1.622 (39.57 - 41.20) 2.015 - 2.079 (51.18 - 52.81) Outside Diameter (O.D.) in. (mm) 1.020 - 1.060 (25.91 - 26.92) 1.285 - 1.325 (32.64 - 33.65) 1.628 - 1.672 (41.35 - 42.47) 1.868 - 1.912 (47.45 - 48.56) 2.323 - 2.387 (59.00 - 60.63) Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 21 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Kortech® – Single Wall Specification Description • HDPE (High Density Polyethylene) • General purpose outdoor applications • Light weight with outstanding flexibility • Easy to handle • Less wear on installation equipment KORTECH – SINGLE WALL REELS & COILS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Pull Tape Put-Up Size Average I.D. (Inches) Average O.D. (Inches) Weight (lbs/foot) Weight (lbs/Full Reel) REELS 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 2” 2” 2” 2” 3” PDCN0750F1000R PDCN0750F5000R PDCN1000F0500R PDCN1000F1000R PDCN1000F2000R PDCN1000F2500R PDCN1000F3000R PDCN1000F5000R PDCN1000F8000R PDCN1250F0500R PDCN1250F1000R PDCN1250F1500R PDCN1250F2000R PDCN1250F3200R PDCN1250F4000R PDCN1250F5000R PDCN1500F0700R PDCN1500F1000R PDCN1500F2000R PDCN1500F2500R PDCN1500F4000R PDCN2000F0500R PDCN2000F0700R PDCN2000F1000R PDCN2000F2000R PDCN3000F2000R 200# 200# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 400# 900# COILS 3/4” PDCN0750F0250C 200# 3/4” PDCN0750F0500C 200# 1” PDCN1000F0250C 400# 1 1/4” PDCN1250F0200C 400# 1 1/2” PDCN1500F0150C 400# 1 1/2” PDCN1500F0350C 400# 2” PDCN2000F0100C 400# 2” PDCN2000F0250C 400# 3” PDCN3000F0200C 900# • Specialty Coils are available on request. • Products in Bold are stock items. Disclaimer and Standard Warranty on inside back cover. 22 www.easternwire.com 1000 5000 500 1000 2000 2500 3000 5000 8000 500 1000 1500 2000 3200 4000 5000 700 1000 2000 2500 4000 500 700 1000 2000 1000 0.804 0.804 1.029 1.029 1.029 1.029 1.029 1.029 1.029 1.360 1.360 1.360 1.360 1.360 1.360 1.360 1.590 1.590 1.590 1.590 1.590 2.047 2.047 2.047 2.047 3.009 1.040 1.040 1.305 1.305 1.305 1.305 1.305 1.305 1.305 1.650 1.650 1.650 1.650 1.650 1.650 1.650 1.890 1.890 1.890 1.890 1.890 2.355 2.355 2.355 2.355 3.590 0.110 0.110 0.140 0.140 0.140 0.140 0.140 0.140 0.140 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.230 0.230 0.230 0.230 0.230 0.260 0.260 0.260 0.260 0.430 175 585 140 205 360 440 530 850 1290 153 255 353 460 685 840 1015 245 320 590 706 1090 235 289 380 690 530 250 500 250 200 150 350 100 250 200 0.804 0.804 1.029 1.360 1.590 1.590 2.047 2.047 3.009 1.040 1.040 1.305 1.650 1.890 1.890 2.355 2.355 3.590 0.110 0.110 0.140 0.175 0.230 0.230 0.260 0.260 0.430 23 45 28 35 35 81 26 65 86 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Kortech® – Dual Wall Description • A continuous length conduit with a corrugated exterior and smooth interior. Dual Wall Kortech™ is half the weight of conventional HDPE, solid wall pipe. This allows for easier handling and less expensive installation equipment. Also, DW Kortech® has limited “memory” when unreeled, allowing for easier field installation. Applications • DWK™ is specifically designed by Eastern Wire + Conduit for use by Utilities, Service Providers, and Municipalities for the construction of Underground systems. Material • High density polyethylene (HDPE) resin. Markings • Eastern Wire + Conduit • Trade Size • Dual Wall Kortech • HDPE • Date of Manufacture • Sequential markings in requested units (Markings may be altered upon request) Additives • UV stabilization additive Corrugated Outer Wall O.D. I.D. Smooth Inner Wall Certification • Under Eastern’s Quality Assurance System. Colors • Inner wall is black, outer wall available in a variety of colors. INNERDUCT – Dual Wall Kortech™ Trade Size Inside Diameter (I.D.) in (mm) Outside Diameter (O.D.) in. (mm) 2.04 (51.82) 3.00 (76.20) 2.52 (64.00) 3.60 (91.44) 2” (53) 3” (78) • Product coming soon. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com O.D. I.D. 23 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Kortech® – Dual Wall Specification Description • • • • • • HDPE (High Density Polyethylene) Superior Corrugated Flexible Exterior Ribbed inner wall for reduced coefficient of friction Provides excellent stiffness, half the weight of conventional HDPE Light weight, easy to handle, and less wear on installation equipment Limited “memory” when unreeled KORTECH – DUAL WALL REELS Product Codes, Trade Sizes, Specifications, Packaging & Weights Trade Part Number Size 2” 3” • PDDN2000 PDDN3000 O.D. (Inches) I.D (Inches) Wall (inches) 2.520 3.605 2.036 3.007 0.480 0.590 Weight (lbs/foot) 0.340 0.450 Specialty Coils are available on request. SWK – SNAP COUPLING FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFCSC0750 PFCSC1000 PFCSC1250 PFCSC1500 PFCSC2000 Carton Qty 50 50 50 40 15 SWK – SNAP THREADED TA FITTINGS Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFTHC0750 PFTHC1000 PFTHC1250 PFTHC1500 PFTHC2000 COMPRESSION PLUG Trade Size 3/4” 1” 1 1/4” 1 1/2” 2” Part Number PFPHC0750 PFPHC1000 PFPHC1250 PFPHC1500 PFPHC2000 Disclaimer and Standard Warranty on inside back cover. 24 www.easternwire.com Carton Qty 50 50 50 50 25 Carton Qty As required As required As required As required As required Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Eastern’s Armor-Duct™ — Specialty Raceway Specifications & Features Description (Specialty Raceway) • Interlocking Armor with Corrugated liner and an outer PE jacket with -76°C brittleness temperature to provide flexibility and superior long term protection of the cables. • Excellent product for applications under heavy traffic area and heavy load such as highway crossing, driveways, industrial floors. etc. • Directional boreable for ease of installation. Certification • For further details on Armor-Duct™, contact us or contact your local Armor-Duct™ distributor. Features • Armor-Duct™ is designed to provide superior protection for direct burial applications with the flexibility of interlocking armor product. • Protected over the Galvanized Steel Interlocking armor is a PE jacket with a brittleness temperature of -76°C to prevent moisture penetration to the armor and the cables. • Corrugated HDPE liner to minimize pulling friction and protect the cables. • Designed for under heavy traffic and heavy load areas. • Resists crushing, impact, rodents, sunlight, and moisture. Dimensions SPECIALTY RACEWAY Nominal I.D. (inches) Nominal O.D. (inches) Fittings (Appleton Stainless Steel) 0.75 1.30 1.70 1.30 1.90 2.30 TMC125SS TMC200SS TMC250SS Armor-Duct™ 1000 Armor-Duct™ 1250 Armor-Duct™ 1500 Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 25 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Protect-N-Duct – Low-Smoke - Zero Halogen (LSZH) Description Markings • • Eastern Wire + Conduit • Product-N-Duct LZSH Riser • Optical Fiber/Communication Raceway • FT 4/Riser • UL logo • Date of Manufacture • Sequential length markings Corrugated flexible LSZH innerduct FT4 Riser rated, with standard pull tape. Extremely lightweight, allowing easier handling and less expensive installation equipment. Application • Corrugated flexible innerduct UL listed for applications in optical fiber/communication cable raceway systems. Suitable for use in vertical runs in a shaft or between floors and in tunnels. Certification • • UL Listed to 2024 (Optical Fiber Cable Raceways - FT4) In accordance with (NEC) as defined in Articles 725, 770, 800 and 820. Corrugated Wall O.D. I.D. Pull Tape/Rope Colors • Available in natural color and others. Dimensions Trade Size 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” Inside Diameter (I.D.) in (mm) 0.574 - 0.630 (14.58 - 16.00) 0.774 - 0.834 (19.66 - 21.18) 0.999 - 1.059 (25.40 - 26.90) 1.328 - 1.392 (33.73 - 35.36) 1.558 - 1.622 (39.57 - 41.20) 2.015 - 2.079 (51.18 - 52.81) Disclaimer and Standard Warranty on inside back cover. 26 www.easternwire.com Outside Diameter (O.D.) in. (mm) 0.812 - 0.848 (20.63 - 21.54) 1.020 - 1.060 (25.91 - 26.92) 1.285 - 1.325 (32.64 - 33.65) 1.628 - 1.672 (41.35 - 42.47) 1.868 - 1.912 (47.45 - 48.56) 2.326 - 2.387 (59.00 - 60.63) Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Eastern’s CPID — Cable Protection & Identification Description (Specialty Services) • CPID refers to Eastern’s process of adding a protective interlock armor to customer supplied core (wire, cable or fibre). As an option, an outer jacket of specially formulated PVC can be added to provide further protection. • CPID can often eliminate the costly and time consuming process of installing cable into conventional conduit raceways. Certification Eastern has CSA approval to armor and jacket for an extensive range of applications, including: • Data cables: including fiber optics. • Fire alarm and Signal Cables (CSA C22.2 No. 208 M 1986). • Metal clad (UL Standard 1569, CSA-NRTL, CSA-C22-174 M 1984, CSA-C22.2 No. 239-M9). • Control & Instrumental Cables. • Communications Cables CSA-C22.2 No. 214-94, UL-444, CSA - C/US. Features • • • • • • CPID can be combined to provide further cost savings in the installation of cables. Eastern offers sequential footage or meter markings. Custom printing on all CPID jacket types. Types created to suit your specific cabling requirements. Small minimum quantities Short lead-time Available CPID Constructions EITHER STEEL OR ALUMINUM Armoring Material Available Armor Colors AQUA BLACK BLUE ORANGE RED WHITE YELLOW X X X X X X X RISER RATED (FT4) AND PLENUM RATED (FT6) Available Jacketing Materials Available Jacket Colors AQUA BLACK BLUE BROWN GRAY GREEN ORANGE PURPLE RED WHITE X X X X X X X X X X Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 27 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Disclaimer and Standard Warranty on inside back cover. 28 www.easternwire.com Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Bundling & Special Packaging HIGH DENSITY POLYETHYLENE PIPE – BUNDLING & SEGMENTING • Segmented (chambered) reels are available in any color and any put up on request. • Also available are bundled reels - two or more colors placed together on a reel to enable pulling as a bundle of colors. • Available in any SDR or Schedule as well as Single Wall Kortech® (SWK) and Dual Wall Kortech® (DWK). SPECIAL PACKAGING FOR LARGE WOODEN REELS We want to ensure that your Eastern Wire + Conduit product is received in the same high quality condition that it left our plant. For this reason, all of our large reels are braced on skids to allow safe handling avoiding damage. We realize that these reels can travel great distances and be shuttled from carrier to carrier. We take the extra packaging steps in an effort to protect your product by securing the reel to the pallet and leaving a sufficient space between the product and the end of the reels flange. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 29 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Handling & Installation RECEIVING When receiving shipments of these products at the job site, the contractor or purchaser should exercise established precautions. Each shipment should be inspected and inventoried with care upon arrival. The product was inspected and loaded with care at our factory using methods acceptable to the carrier. It is the carrier’s responsibility to deliver the shipment in good condition, and it is the receiver’s responsibility to ensure that there is no loss or damage. UNLOADING The means by which these products are unloaded in the field is the decision and the responsibility of the receiver. The following recommendations should be followed: 1. Remove restraints from the reels. These may be straps, ropes or chains with padding. 2. Using a forklift (or front end loader equipped with forks), remove the reels one at a time from the truck. 3. During the removal and handling, ensure that the reels do not make impact with other objects, especially in cold weather. 4. Place reels on level ground. 5. Do not unload reels by hand. Care should be taken to ensure reels are not dropped or damaged. STORAGE The following procedures are recommended to prevent damage to your product: 1. Store on original reels. 2. Do not stack large reels. 3. When small reels are stacked, ensure that the weight of upper reel does not cause deformation to the lower reel. 4. Protect interior and sealing surfaces from dirt and foreign matter. 5. If you anticipate storing outside under intense sunlight for over one year, we advise you cover it with canvas or other opaque material, being sure to leave adequate air circulation. 6. Protect-N-Duct Plenum and Riser should Never be stored outdoors. HANDLING The following procedures are recommended: 1. When using mechanical equipment, exercise care to prevent damage to pipe. 2. Lower carefully from trucks and into trenches. Do not drop. 3. In freezing temperatures, use caution to prevent impact damage. Handling methods considered acceptable for warm weather are unacceptable during very cold weather. As the temperature approaches and drops below freezing, the flexibility and impact resistance of HDPE is reduced. Extra care should be used. 4. Extreme care should be used if Protect-N-Duct™ is handled or installed in temperatures below 0°C (32°F). Disclaimer and Standard Warranty on inside back cover. 30 www.easternwire.com Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog Disclaimer & Warranty DISCLAIMER The application information, references & ratings provided in sections of this catalog are not intended to provide all relevant information for the use and installation of our products. Please consult the NEC®/CEC® and any applicable local codes before installation. If you have any questions about the proper use of our products, please call Customer Services at 1-877-583-9085. WARRANTY We guarantee the right to replace or, at our option, to repair any material which we find, in our sole discretion, to be defective in material or workmanship, provided that a claim, and proof thereof, is made to us within thirty (30) days after purchaser’s receipt thereof. Our obligation, with respect to material found by us to be defective, shall be limited to replacement or repair. In no event shall we be liable for transportation to or from our factory, installation, adjustments, or any expenses or damages for loss of use, and the foregoing shall be the purchaser’s sole remedy hereunder. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE, EXPRESSED, OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Disclaimer and Standard Warranty on inside back cover. www.easternwire.com 31 Eastern Wire + Conduit™ Innerduct & Custom Armor Product Catalog 960 Flaherty Drive New Bedford, MA 02745 TOLL-FREE / 877-865-1776 FAX / 508-998-1447 www.easternwire.com ® Disclaimer and Standard Warranty on inside back cover. 32 www.easternwire.com ©2012 Atkore International, Inc. All rights reserved. EWC-L-1002-1211
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2012:11:05 14:33:47-06:00 Creator : Adobe InDesign CS5.5 (7.5) Modify Date : 2012:11:15 09:22:24-06:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2012:11:15 09:22:24-06:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 11050 bytes, use -b option to extract), (Binary data 10188 bytes, use -b option to extract) Instance ID : uuid:c205f301-65bd-fa41-8566-f83ccbac399c Original Document ID : xmp.did:F87F11740720681193E6F591A2A38F59 Document ID : xmp.did:640BC4DC1A2068118A6DF59E65D0CB92 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:F87F11740720681193E6F591A2A38F59, xmp.iid:F97F11740720681193E6F591A2A38F59, xmp.iid:FA7F11740720681193E6F591A2A38F59, xmp.iid:FB7F11740720681193E6F591A2A38F59, xmp.iid:FC7F11740720681193E6F591A2A38F59, xmp.iid:FD7F11740720681193E6F591A2A38F59, xmp.iid:FE7F11740720681193E6F591A2A38F59, xmp.iid:FF7F11740720681193E6F591A2A38F59, xmp.iid:008011740720681193E6F591A2A38F59, xmp.iid:01801174072068118DBBA46ABD886D28, xmp.iid:F77F11740720681192B0FC843A3F9C59, xmp.iid:F87F11740720681192B0FC843A3F9C59, xmp.iid:F97F11740720681192B0FC843A3F9C59, xmp.iid:FA7F11740720681192B0FC843A3F9C59, xmp.iid:FB7F11740720681192B0FC843A3F9C59, xmp.iid:FC7F11740720681192B0FC843A3F9C59, xmp.iid:FD7F11740720681192B0FC843A3F9C59, xmp.iid:018011740720681192B09F3E234C7B84, xmp.iid:028011740720681192B09F3E234C7B84, xmp.iid:038011740720681192B09F3E234C7B84, xmp.iid:048011740720681192B09F3E234C7B84, xmp.iid:058011740720681192B09F3E234C7B84, xmp.iid:068011740720681192B09F3E234C7B84, xmp.iid:078011740720681192B09F3E234C7B84, xmp.iid:01801174072068119109CC95BBC3388C, xmp.iid:0180117407206811827E91F4C8DD6B46, xmp.iid:0280117407206811827E91F4C8DD6B46, xmp.iid:0380117407206811827E91F4C8DD6B46, xmp.iid:0480117407206811827E91F4C8DD6B46, xmp.iid:0580117407206811827E91F4C8DD6B46, xmp.iid:0680117407206811827E91F4C8DD6B46, xmp.iid:0780117407206811827E91F4C8DD6B46, xmp.iid:0880117407206811827E91F4C8DD6B46, xmp.iid:0980117407206811827E91F4C8DD6B46, xmp.iid:0A80117407206811827E91F4C8DD6B46, xmp.iid:6605741423206811827E91F4C8DD6B46, xmp.iid:028011740720681191099A2930329E23, xmp.iid:038011740720681191099A2930329E23, xmp.iid:018011740720681192B08F8EFEFC2B56, xmp.iid:018011740720681197A5B38FCDFD9A7A, xmp.iid:FF7F117407206811994CCA46B764DD52, xmp.iid:0180117407206811945787433F9E6DA7, xmp.iid:0280117407206811945787433F9E6DA7, xmp.iid:087F1374072068118A6DB6AC322A06B7, xmp.iid:097F1374072068118A6DB6AC322A06B7, xmp.iid:0A7F1374072068118A6DB6AC322A06B7, xmp.iid:F4883B51082068118A6DB6AC322A06B7, xmp.iid:6371EDE60C2068118A6DB6AC322A06B7, xmp.iid:F967A3D5112068118A6DB6AC322A06B7, xmp.iid:CEC7E033122068118A6DB6AC322A06B7, xmp.iid:C43E1E4B132068118A6DB6AC322A06B7, xmp.iid:C63CD5EC132068118A6DB6AC322A06B7, xmp.iid:17C97D69142068118A6DB6AC322A06B7, xmp.iid:59C39FD7142068118A6DB6AC322A06B7, xmp.iid:D5F5FC0B152068118A6DB6AC322A06B7, xmp.iid:26A21374072068118A6D984635FA9580, xmp.iid:F6ECFA5D1A2068118A6D984635FA9580, xmp.iid:B83F16740720681188C6953340864CCF, xmp.iid:3C1A0AD30920681188C6953340864CCF, xmp.iid:EDEB578C0A20681188C6953340864CCF, xmp.iid:E1C73BAF0A20681188C6953340864CCF, xmp.iid:BBA4E27B0C20681188C6953340864CCF, xmp.iid:A5237EAE1220681188C6953340864CCF, xmp.iid:682BB38A1820681188C6953340864CCF, xmp.iid:75C3C2A61820681188C6953340864CCF, xmp.iid:E96FA9B2192068118A6DD4E267229A08, xmp.iid:E19AACD61E2068118A6DD4E267229A08, xmp.iid:B27A875C1F2068118A6DD4E267229A08, xmp.iid:90BE2441202068118A6DD4E267229A08, xmp.iid:38A9D027222068118A6DD4E267229A08, xmp.iid:C900FC52222068118A6DD4E267229A08, xmp.iid:6F3EC171222068118A6DD4E267229A08, xmp.iid:EAC91374072068118A6DA79DA57297CA, xmp.iid:30C4C2AB072068118A6DA79DA57297CA, xmp.iid:7FF10D55082068118A6DA79DA57297CA, xmp.iid:D544C0D8092068118A6DA79DA57297CA, xmp.iid:E135A3060A2068118A6DA79DA57297CA, xmp.iid:E41CAE500A2068118A6DA79DA57297CA, xmp.iid:E51CAE500A2068118A6DA79DA57297CA, xmp.iid:E61CAE500A2068118A6DA79DA57297CA, xmp.iid:B2BB7A300B2068118A6DA79DA57297CA, xmp.iid:B3BB7A300B2068118A6DA79DA57297CA, xmp.iid:974BED7A1C2068118A6DB7CA2B3208CE, xmp.iid:318D38D91D2068118A6DB7CA2B3208CE, xmp.iid:3A0A831E1F2068118A6DB7CA2B3208CE, xmp.iid:84C9485D1F2068118A6DB7CA2B3208CE, xmp.iid:0A4944881F2068118A6DB7CA2B3208CE, xmp.iid:AFC560B11F2068118A6DB7CA2B3208CE, xmp.iid:B736DFD0202068118A6DB7CA2B3208CE, xmp.iid:B836DFD0202068118A6DB7CA2B3208CE, xmp.iid:309AC7000820681188C6AED9127ED706, xmp.iid:9C3CED5A0A20681188C6AED9127ED706, xmp.iid:45CBA2700A20681188C6AED9127ED706, xmp.iid:606CBF460B20681188C6AED9127ED706, xmp.iid:485B04A70B20681188C6AED9127ED706, xmp.iid:CB0771140C20681188C6AED9127ED706, xmp.iid:DA4E7DEC0D20681188C6AED9127ED706, xmp.iid:D423B63F0E20681188C6AED9127ED706, xmp.iid:2D3579E60E20681188C6AED9127ED706, xmp.iid:6E2060F80E20681188C6AED9127ED706, xmp.iid:A4A8A6AF0F20681188C6AED9127ED706, xmp.iid:95B3BCA01020681188C6AED9127ED706, xmp.iid:768596621120681188C6AED9127ED706, xmp.iid:031493D01120681188C6AED9127ED706, xmp.iid:178848FC1120681188C6AED9127ED706, xmp.iid:EEFF3A571220681188C6AED9127ED706, xmp.iid:4FBE7DA01220681188C6AED9127ED706, xmp.iid:D29C23BD1220681188C6AED9127ED706, xmp.iid:32533CC61320681188C6AED9127ED706, xmp.iid:517240D21320681188C6AED9127ED706, xmp.iid:90ADCDD71320681188C6AED9127ED706, xmp.iid:2605DDEB1320681188C6AED9127ED706, xmp.iid:FD83CF0A1420681188C6AED9127ED706, xmp.iid:FE83CF0A1420681188C6AED9127ED706, xmp.iid:1D9CA2D21420681188C6AED9127ED706, xmp.iid:1E9CA2D21420681188C6AED9127ED706, xmp.iid:8EA86FB71720681188C6AED9127ED706, xmp.iid:AD8DC4231B20681188C6AED9127ED706, xmp.iid:DB2A41BC1B20681188C6AED9127ED706, xmp.iid:109F8DCB1B20681188C6AED9127ED706, xmp.iid:119F8DCB1B20681188C6AED9127ED706, xmp.iid:1EB0221B2120681188C6AED9127ED706, xmp.iid:CC9FD6312120681188C6AED9127ED706, xmp.iid:3FA569BF2120681188C6AED9127ED706, xmp.iid:E1BA8C1D2220681188C6AED9127ED706, xmp.iid:76BEF4792220681188C6AED9127ED706, xmp.iid:73DBAFE32220681188C6AED9127ED706, xmp.iid:ECE906942320681188C6AED9127ED706, xmp.iid:EA27567D2420681188C6AED9127ED706, xmp.iid:A3F1B85D2520681188C6AED9127ED706, xmp.iid:1C9783AE2520681188C6AED9127ED706, xmp.iid:8E6A9D1E2620681188C6AED9127ED706, xmp.iid:17048B842620681188C6AED9127ED706, xmp.iid:B0AE24962620681188C6AED9127ED706, xmp.iid:072C2DB22620681188C6AED9127ED706, xmp.iid:082C2DB22620681188C6AED9127ED706, xmp.iid:CA67140D2820681188C6AED9127ED706, xmp.iid:DF1898192820681188C6AED9127ED706, xmp.iid:E2B278C42820681188C6AED9127ED706, xmp.iid:D5189E532920681188C6AED9127ED706, xmp.iid:BC2879BC2920681188C6AED9127ED706, xmp.iid:A21D885E2A20681188C6AED9127ED706, xmp.iid:BDA770F72A20681188C6AED9127ED706, xmp.iid:7C4214762B20681188C6AED9127ED706, xmp.iid:FF82849B2B20681188C6AED9127ED706, xmp.iid:F61A9D6D2C20681188C6AED9127ED706, xmp.iid:7165E2962C20681188C6AED9127ED706, xmp.iid:B16258E62C20681188C6AED9127ED706, xmp.iid:B0F21D0C2D20681188C6AED9127ED706, xmp.iid:F74E931D2D20681188C6AED9127ED706, xmp.iid:C8B3D8212D20681188C6AED9127ED706, xmp.iid:02A71374072068118A6DF400EF6E47F3, xmp.iid:6DDAF9F5072068118A6DF400EF6E47F3, xmp.iid:D699650E082068118A6DF400EF6E47F3, xmp.iid:40656A40082068118A6DF400EF6E47F3, xmp.iid:23626BED082068118A6DF400EF6E47F3, xmp.iid:72101F89092068118A6DF400EF6E47F3, xmp.iid:A7DB0D54102068118A6DF400EF6E47F3, xmp.iid:2971C801112068118A6DF400EF6E47F3, xmp.iid:F0B6CB0B122068118A6DF400EF6E47F3, xmp.iid:53F0049A142068118A6DF400EF6E47F3, xmp.iid:1AF66404162068118A6DF400EF6E47F3, xmp.iid:74CB6A68162068118A6DF400EF6E47F3, xmp.iid:DB02671F172068118A6DF400EF6E47F3, xmp.iid:5CEEF2DC172068118A6DF400EF6E47F3, xmp.iid:62CABB47192068118A6DF400EF6E47F3, xmp.iid:54E504BF192068118A6DF400EF6E47F3, xmp.iid:D2F55E321D2068118A6DF400EF6E47F3, xmp.iid:EC07AF4C1D2068118A6DF400EF6E47F3, xmp.iid:A668B24C1D2068118A6DF400EF6E47F3, xmp.iid:4ECED8BD392068118A6DDF82E2D93458, xmp.iid:4FCED8BD392068118A6DDF82E2D93458, xmp.iid:1C0129F4392068118A6DDF82E2D93458, xmp.iid:D9300A343A2068118A6DDF82E2D93458, xmp.iid:22CB3E6B3A2068118A6DDF82E2D93458, xmp.iid:FD1B42903A2068118A6DDF82E2D93458, xmp.iid:BC4B2EBE3A2068118A6DDF82E2D93458, xmp.iid:D1C9D7613B2068118A6DDF82E2D93458, xmp.iid:7C680F8A3B2068118A6DDF82E2D93458, xmp.iid:63B4F8993B2068118A6DDF82E2D93458, xmp.iid:8C11E9B33B2068118A6DDF82E2D93458, xmp.iid:262C3BFD3B2068118A6DDF82E2D93458, xmp.iid:F34F1F1D3C2068118A6DDF82E2D93458, xmp.iid:CB63A14C092068118A6DCD259E19A290, xmp.iid:CC63A14C092068118A6DCD259E19A290, xmp.iid:04F41B74072068118A6DAED60ADC11B8, xmp.iid:DDECCF28082068118A6DAED60ADC11B8, xmp.iid:AE740610092068118A6DAED60ADC11B8, xmp.iid:AF740610092068118A6DAED60ADC11B8, xmp.iid:42AB6E4B092068118A6DAED60ADC11B8, xmp.iid:43AB6E4B092068118A6DAED60ADC11B8, xmp.iid:2AE0A0B40A2068118A6DAED60ADC11B8, xmp.iid:27B92E130B2068118A6DAED60ADC11B8, xmp.iid:28B92E130B2068118A6DAED60ADC11B8, xmp.iid:159BA7B90C2068118A6DAED60ADC11B8, xmp.iid:8BE4FA3F0D2068118A6DAED60ADC11B8, xmp.iid:9D1E7F84142068118A6DAED60ADC11B8, xmp.iid:AC540D72162068118A6DAED60ADC11B8, xmp.iid:752BC6C7162068118A6DAED60ADC11B8, xmp.iid:E81520D3162068118A6DAED60ADC11B8, xmp.iid:E2354C6E172068118A6DAED60ADC11B8, xmp.iid:89742823182068118A6DAED60ADC11B8, xmp.iid:E6169F00192068118A6DAED60ADC11B8, xmp.iid:A04B6D081B2068118A6DAED60ADC11B8, xmp.iid:A14B6D081B2068118A6DAED60ADC11B8, xmp.iid:C9A989181B2068118A6DAED60ADC11B8, xmp.iid:CAA989181B2068118A6DAED60ADC11B8, xmp.iid:AE8E2B861D2068118A6DAED60ADC11B8, xmp.iid:AF8E2B861D2068118A6DAED60ADC11B8, xmp.iid:55CEDE951D2068118A6DAED60ADC11B8, xmp.iid:56CEDE951D2068118A6DAED60ADC11B8, xmp.iid:64BC9EC81D2068118A6DAED60ADC11B8, xmp.iid:ECB233D61D2068118A6DAED60ADC11B8, xmp.iid:EDB233D61D2068118A6DAED60ADC11B8, xmp.iid:3CF799C9202068118A6DAED60ADC11B8, xmp.iid:1E0DC064212068118A6DAED60ADC11B8, xmp.iid:320BFFA9212068118A6DAED60ADC11B8, xmp.iid:EE87F5A2262068118A6DAED60ADC11B8, xmp.iid:42240ABB272068118A6DAED60ADC11B8, xmp.iid:CAB1BBC6272068118A6DAED60ADC11B8, xmp.iid:B805C2D3272068118A6DAED60ADC11B8, xmp.iid:DEC65EDC272068118A6DAED60ADC11B8, xmp.iid:5E8FC7F3272068118A6DAED60ADC11B8, xmp.iid:8A798709282068118A6DAED60ADC11B8, xmp.iid:8B798709282068118A6DAED60ADC11B8, xmp.iid:E30F3AC7282068118A6DAED60ADC11B8, xmp.iid:AF9A08F2282068118A6DAED60ADC11B8, xmp.iid:2FAE1A65292068118A6DAED60ADC11B8, xmp.iid:0C6FFBB62C2068118A6DAED60ADC11B8, xmp.iid:75EB468B322068118A6DAED60ADC11B8, xmp.iid:A8CB8FC4342068118A6DAED60ADC11B8, xmp.iid:1F97C335352068118A6DAED60ADC11B8, xmp.iid:2CD89642352068118A6DAED60ADC11B8, xmp.iid:5FD1CAB5352068118A6DAED60ADC11B8, xmp.iid:50DC5DCD352068118A6DAED60ADC11B8, xmp.iid:02F3FB6B152068118A6DBBC9883F28A8, xmp.iid:03F3FB6B152068118A6DBBC9883F28A8, xmp.iid:2A1AF4A3152068118A6DBBC9883F28A8, xmp.iid:1BB0AEC7152068118A6DBBC9883F28A8, xmp.iid:44906C9E162068118A6DBBC9883F28A8, xmp.iid:45906C9E162068118A6DBBC9883F28A8, xmp.iid:8FFAC7F5172068118A6DBBC9883F28A8, xmp.iid:3205F76B182068118A6DB58AFC5AE28C, xmp.iid:93DABC8B182068118A6DB58AFC5AE28C, xmp.iid:EDCF64C31A2068118A6DB58AFC5AE28C, xmp.iid:08083C411B2068118A6DB58AFC5AE28C, xmp.iid:42CD7B4C1B2068118A6DB58AFC5AE28C, xmp.iid:80DF026F1B2068118A6DB58AFC5AE28C, xmp.iid:F34556771B2068118A6DB58AFC5AE28C, xmp.iid:B9E56F831B2068118A6DB58AFC5AE28C, xmp.iid:7D69F19F1B2068118A6DB58AFC5AE28C, xmp.iid:B4F3D7A51B2068118A6DB58AFC5AE28C, xmp.iid:5ACECC241C2068118A6DB58AFC5AE28C, xmp.iid:0CB3CE7B1C2068118A6DB58AFC5AE28C, xmp.iid:C33A7A941C2068118A6DB58AFC5AE28C, xmp.iid:F5EE21B51C2068118A6DB58AFC5AE28C, xmp.iid:B0E812D11C2068118A6DB58AFC5AE28C, xmp.iid:20E87DD71C2068118A6DB58AFC5AE28C, xmp.iid:98D0DC071D2068118A6DB58AFC5AE28C, xmp.iid:5F9C7F111D2068118A6DB58AFC5AE28C, xmp.iid:A1ECD6801D2068118A6DB58AFC5AE28C, xmp.iid:ED3A55111E2068118A6DB58AFC5AE28C, xmp.iid:0C7802651E2068118A6DB58AFC5AE28C, xmp.iid:0A3323761E2068118A6DB58AFC5AE28C, xmp.iid:CCFBAA8F1E2068118A6DB58AFC5AE28C, xmp.iid:C79DD7BE1E2068118A6DB58AFC5AE28C, xmp.iid:BF15DED31E2068118A6DB58AFC5AE28C, xmp.iid:50E37E4F1F2068118A6DB58AFC5AE28C, xmp.iid:14451974072068118A6DB3DC304F3EC2, xmp.iid:15451974072068118A6DB3DC304F3EC2, xmp.iid:D16B8691072068118A6DB3DC304F3EC2, xmp.iid:0C7C216E0B2068118A6DB3DC304F3EC2, xmp.iid:84F7760F0C2068118A6DB3DC304F3EC2, xmp.iid:083D6E480C2068118A6DB3DC304F3EC2, xmp.iid:A0FDB1740C2068118A6DB3DC304F3EC2, xmp.iid:A1FDB1740C2068118A6DB3DC304F3EC2, xmp.iid:75DCC9990C2068118A6DB3DC304F3EC2, xmp.iid:F336EACC0C2068118A6DB3DC304F3EC2, xmp.iid:DA255E49152068118A6DB3DC304F3EC2, xmp.iid:0D10E863152068118A6DB3DC304F3EC2, xmp.iid:FB3958A8152068118A6DB3DC304F3EC2, xmp.iid:BA47D0B6152068118A6DB3DC304F3EC2, xmp.iid:7E1B52E2152068118A6DB3DC304F3EC2, xmp.iid:622E2A08162068118A6DB3DC304F3EC2, xmp.iid:632E2A08162068118A6DB3DC304F3EC2, xmp.iid:642E2A08162068118A6DB3DC304F3EC2, xmp.iid:24377A4D172068118A6DB3DC304F3EC2, xmp.iid:72401C1B182068118A6DB3DC304F3EC2, xmp.iid:A1BDD7EF192068118A6DB3DC304F3EC2, xmp.iid:EB31CD261A2068118A6DB3DC304F3EC2, xmp.iid:755DE25A1A2068118A6DB3DC304F3EC2, xmp.iid:A26054F21A2068118A6DB3DC304F3EC2, xmp.iid:80F1A13E1B2068118A6DB3DC304F3EC2, xmp.iid:B86D00491B2068118A6DB3DC304F3EC2, xmp.iid:6CDBD0F11B2068118A6DB3DC304F3EC2, xmp.iid:D08DA6661E2068118A6DB3DC304F3EC2, xmp.iid:02510FC11E2068118A6DB3DC304F3EC2, xmp.iid:0F6205F61E2068118A6DB3DC304F3EC2, xmp.iid:AD9D3E641F2068118A6DB3DC304F3EC2, xmp.iid:FF52FB801F2068118A6DB3DC304F3EC2, xmp.iid:723C2F62292068118A6DB3DC304F3EC2, xmp.iid:733C2F62292068118A6DB3DC304F3EC2, xmp.iid:743C2F62292068118A6DB3DC304F3EC2, xmp.iid:045C7FFB2A2068118A6DB3DC304F3EC2, xmp.iid:F77F1174072068118A6D96E05EB8604D, xmp.iid:274A2074072068118A6D96E05EB8604D, xmp.iid:D791CEB3072068118A6D96E05EB8604D, xmp.iid:3AB474CC072068118A6D96E05EB8604D, xmp.iid:96A794ED072068118A6D96E05EB8604D, xmp.iid:240F68F1072068118A6D96E05EB8604D, xmp.iid:31D2641D082068118A6D96E05EB8604D, xmp.iid:C54F574F082068118A6D96E05EB8604D, xmp.iid:D8C3EE60082068118A6D96E05EB8604D, xmp.iid:3287CC91082068118A6D96E05EB8604D, xmp.iid:9E7889C6082068118A6D96E05EB8604D, xmp.iid:FC9E44D90A2068118A6D96E05EB8604D, xmp.iid:332347F30A2068118A6D96E05EB8604D, xmp.iid:342347F30A2068118A6D96E05EB8604D, xmp.iid:DAA687B90B2068118A6D96E05EB8604D, xmp.iid:27962C270D2068118A6D96E05EB8604D, xmp.iid:8FAD5B400D2068118A6D96E05EB8604D, xmp.iid:60C656A60D2068118A6D96E05EB8604D, xmp.iid:B15733C90D2068118A6D96E05EB8604D, xmp.iid:2DFAD80A0E2068118A6D96E05EB8604D, xmp.iid:94AA883E0E2068118A6D96E05EB8604D, xmp.iid:9868BDA70E2068118A6D96E05EB8604D, xmp.iid:9968BDA70E2068118A6D96E05EB8604D, xmp.iid:601C3D53132068118A6D96E05EB8604D, xmp.iid:9754F964412068118C14DE01D808739B, xmp.iid:35265086412068118C14DE01D808739B, xmp.iid:36265086412068118C14DE01D808739B, xmp.iid:2B4B09EE422068118C14DE01D808739B, xmp.iid:2C4B09EE422068118C14DE01D808739B, xmp.iid:A8877081452068118C14DE01D808739B, xmp.iid:DDCB00F73D2068118A6DB936AE08F45C, xmp.iid:F6FB16FE402068118A6DB936AE08F45C, xmp.iid:B2F61A21412068118A6DB936AE08F45C, xmp.iid:C7DA162C412068118A6DB936AE08F45C, xmp.iid:C8DA162C412068118A6DB936AE08F45C, xmp.iid:4FD68B11462068118A6DB936AE08F45C, xmp.iid:F1BC479B462068118A6DB936AE08F45C, xmp.iid:F2BC479B462068118A6DB936AE08F45C, xmp.iid:E1610147482068118A6DB936AE08F45C, xmp.iid:805DD2E80E2068118A6DD1BFC39EDB1A, xmp.iid:D8B262150F2068118A6DD1BFC39EDB1A, xmp.iid:6736CB580F2068118A6DD1BFC39EDB1A, xmp.iid:6836CB580F2068118A6DD1BFC39EDB1A, xmp.iid:6D68D87F272068118A6D9BA71B1745C4, xmp.iid:6E68D87F272068118A6D9BA71B1745C4, xmp.iid:B95317C82D2068118A6D9BA71B1745C4, xmp.iid:CB84DB252E2068118A6D9BA71B1745C4, xmp.iid:6E3495BC302068118A6D9BA71B1745C4, xmp.iid:F0B03C6D352068118A6D9BA71B1745C4, xmp.iid:81CCDC8F162068118A6DF59E65D0CB92, xmp.iid:640BC4DC1A2068118A6DF59E65D0CB92, xmp.iid:2950CE4A1D2068118A6DF59E65D0CB92, xmp.iid:C6BB2474072068118A6DE2247E64FA0E, xmp.iid:C77AA295072068118A6DE2247E64FA0E, xmp.iid:97C93CAB072068118A6DE2247E64FA0E, xmp.iid:C6DB7CD9072068118A6DE2247E64FA0E, xmp.iid:D008D33D082068118A6DE2247E64FA0E, xmp.iid:F3734FAB082068118A6DE2247E64FA0E History When : 2009:08:19 13:38:44-04:00, 2009:08:19 13:54:18-04:00, 2009:08:19 13:54:18-04:00, 2009:08:19 14:00:13-04:00, 2009:08:19 14:15:33-04:00, 2009:08:19 15:35:33-04:00, 2009:08:19 15:43:16-04:00, 2009:08:19 15:58:44-04:00, 2009:08:19 16:16:51-04:00, 2009:08:21 16:29:48-04:00, 2009:08:25 14:48:36-04:00, 2009:08:25 15:03:29-04:00, 2009:08:25 15:32:13-04:00, 2009:08:25 15:38:25-04:00, 2009:08:25 16:05:26-04:00, 2009:08:25 16:24:24-04:00, 2009:08:25 16:27:51-04:00, 2009:08:26 09:08:31-04:00, 2009:08:26 09:33:27-04:00, 2009:08:26 09:35:01-04:00, 2009:08:26 09:53:38-04:00, 2009:08:26 09:54:25-04:00, 2009:08:26 10:28:23-04:00, 2009:08:26 10:38:26-04:00, 2009:08:26 10:43:08-04:00, 2009:09:23 10:27:21-04:00, 2009:09:23 10:29:01-04:00, 2009:09:23 10:36:42-04:00, 2009:09:23 11:14:30-04:00, 2009:09:23 11:22:38-04:00, 2009:09:23 11:31:21-04:00, 2009:09:23 11:38:36-04:00, 2009:09:23 11:45:25-04:00, 2009:09:23 11:46:45-04:00, 2009:09:23 13:31:19-04:00, 2009:09:23 13:45:07-04:00, 2009:09:30 15:55:07-04:00, 2009:09:30 15:57:28-04:00, 2009:09:30 16:01:58-04:00, 2009:10:02 10:15:10-04:00, 2009:10:07 16:41:59-04:00, 2009:10:14 10:52:15-04:00, 2009:10:14 10:52:53-04:00, 2011:08:24 11:33:35-05:00, 2011:08:24 11:33:35-05:00, 2011:08:24 11:39:46-05:00, 2011:08:24 11:39:46-05:00, 2011:08:24 12:12:35-05:00, 2011:08:24 12:47:54-05:00, 2011:08:24 12:50:32-05:00, 2011:08:24 12:58:21-05:00, 2011:08:24 13:02:52-05:00, 2011:08:24 13:06:21-05:00, 2011:08:24 13:09:26-05:00, 2011:08:24 13:10:54-05:00, 2011:08:25 09:09:23-05:00, 2011:08:25 11:24:46-05:00, 2011:08:29 12:35:38-05:00, 2011:08:29 12:52:37-05:00, 2011:08:29 12:57:48-05:00, 2011:08:29 12:58:46-05:00, 2011:08:29 13:11:39-05:00, 2011:08:29 13:56:01-05:00, 2011:08:29 14:37:58-05:00, 2011:08:29 14:38:45-05:00, 2011:08:30 14:30:40-05:00, 2011:08:30 15:07:28-05:00, 2011:08:30 15:11:13-05:00, 2011:08:30 15:17:36-05:00, 2011:08:30 15:31:13-05:00, 2011:08:30 15:32:25-05:00, 2011:08:30 15:33:17-05:00, 2011:08:31 09:20:20-05:00, 2011:08:31 09:21:54-05:00, 2011:08:31 09:26:38-05:00, 2011:08:31 09:37:28-05:00, 2011:08:31 09:38:45-05:00, 2011:08:31 09:40:49-05:00, 2011:08:31 09:41:20-05:00, 2011:08:31 09:43:54-05:00, 2011:08:31 09:47:05-05:00, 2011:08:31 09:48:03-05:00, 2011:09:07 13:02:07-05:00, 2011:09:07 13:11:55-05:00, 2011:09:07 13:21-05:00, 2011:09:07 13:22:46-05:00, 2011:09:07 13:23:58-05:00, 2011:09:07 13:25:07-05:00, 2011:09:07 13:33:09-05:00, 2011:09:07 13:34:02-05:00, 2012:07:13 14:22:22-05:00, 2012:07:13 14:22:22-05:00, 2012:07:13 14:22:58-05:00, 2012:07:13 14:28:57-05:00, 2012:07:13 14:31:39-05:00, 2012:07:13 14:34:42-05:00, 2012:07:13 14:47:54-05:00, 2012:07:13 14:50:14-05:00, 2012:07:13 14:54:54-05:00, 2012:07:13 14:55:24-05:00, 2012:07:13 15:00:31-05:00, 2012:07:13 15:07:16-05:00, 2012:07:13 15:12:41-05:00, 2012:07:13 15:15:46-05:00, 2012:07:13 15:16:59-05:00, 2012:07:13 15:19:32-05:00, 2012:07:13 15:21:34-05:00, 2012:07:13 15:22:22-05:00, 2012:07:13 15:29:47-05:00, 2012:07:13 15:30:07-05:00, 2012:07:13 15:30:17-05:00, 2012:07:13 15:30:50-05:00, 2012:07:13 15:31:42-05:00, 2012:07:13 15:37:02-05:00, 2012:07:13 15:37:18-05:00, 2012:07:13 15:49:55-05:00, 2012:07:13 15:58-05:00, 2012:07:13 16:22:31-05:00, 2012:07:13 16:26:46-05:00, 2012:07:13 16:27:12-05:00, 2012:07:13 16:42:47-05:00, 2012:07:13 17:05:13-05:00, 2012:07:13 17:05:51-05:00, 2012:07:13 17:09:49-05:00, 2012:07:13 17:12:27-05:00, 2012:07:13 17:15:02-05:00, 2012:07:13 17:17:59-05:00, 2012:07:13 17:22:55-05:00, 2012:07:13 17:29:26-05:00, 2012:07:13 17:35:43-05:00, 2012:07:13 17:37:58-05:00, 2012:07:13 17:41:06-05:00, 2012:07:13 17:43:57-05:00, 2012:07:13 17:44:27-05:00, 2012:07:13 17:45:14-05:00, 2012:07:13 17:52:54-05:00, 2012:07:13 17:54:56-05:00, 2012:07:13 17:55:17-05:00, 2012:07:13 18:00:04-05:00, 2012:07:13 18:04:04-05:00, 2012:07:13 18:07-05:00, 2012:07:13 18:11:32-05:00, 2012:07:13 18:15:48-05:00, 2012:07:13 18:19:21-05:00, 2012:07:13 18:20:23-05:00, 2012:07:13 18:26:16-05:00, 2012:07:13 18:27:25-05:00, 2012:07:13 18:29:39-05:00, 2012:07:13 18:30:42-05:00, 2012:07:13 18:31:11-05:00, 2012:07:13 18:31:18-05:00, 2012:07:16 09:54:22-05:00, 2012:07:16 09:58-05:00, 2012:07:16 09:58:41-05:00, 2012:07:16 10:00:05-05:00, 2012:07:16 10:04:55-05:00, 2012:07:16 10:09:17-05:00, 2012:07:16 10:57:54-05:00, 2012:07:16 11:02:46-05:00, 2012:07:16 11:10:12-05:00, 2012:07:16 11:28:29-05:00, 2012:07:16 11:38:37-05:00, 2012:07:16 11:41:25-05:00, 2012:07:16 11:46:32-05:00, 2012:07:16 11:51:50-05:00, 2012:07:16 12:01:59-05:00, 2012:07:16 12:05:19-05:00, 2012:07:16 12:30:01-05:00, 2012:07:16 12:30:45-05:00, 2012:07:16 12:30:45-05:00, 2012:09:10 14:45:48-05:00, 2012:09:10 14:45:48-05:00, 2012:09:10 14:47:19-05:00, 2012:09:10 14:49:06-05:00, 2012:09:10 14:50:39-05:00, 2012:09:10 14:51:41-05:00, 2012:09:10 14:52:58-05:00, 2012:09:10 14:57:33-05:00, 2012:09:10 14:58:40-05:00, 2012:09:10 14:59:07-05:00, 2012:09:10 14:59:50-05:00, 2012:09:10 15:01:53-05:00, 2012:09:10 15:02:47-05:00, 2012:09:17 10:47:03-05:00, 2012:09:17 11:00:37-05:00, 2012:09:20 08:41:51-05:00, 2012:09:20 08:46:54-05:00, 2012:09:20 08:53:22-05:00, 2012:09:20 08:55:02-05:00, 2012:09:20 08:55:02-05:00, 2012:09:20 08:59:27-05:00, 2012:09:20 09:05:08-05:00, 2012:09:20 09:07:46-05:00, 2012:09:20 09:19:35-05:00, 2012:09:20 09:19:35-05:00, 2012:09:20 09:23:20-05:00, 2012:09:20 10:15:22-05:00, 2012:09:20 10:29:10-05:00, 2012:09:20 10:31:34-05:00, 2012:09:20 10:31:53-05:00, 2012:09:20 10:36:13-05:00, 2012:09:20 10:41:16-05:00, 2012:09:20 10:47:28-05:00, 2012:09:20 11:02-05:00, 2012:09:20 11:02:27-05:00, 2012:09:20 11:02:27-05:00, 2012:09:20 11:10:35-05:00, 2012:09:20 11:19:50-05:00, 2012:09:20 11:20:16-05:00, 2012:09:20 11:20:16-05:00, 2012:09:20 11:20:39-05:00, 2012:09:20 11:21:42-05:00, 2012:09:20 11:22:04-05:00, 2012:09:20 11:40:36-05:00, 2012:09:20 11:43:12-05:00, 2012:09:20 11:47:32-05:00, 2012:09:20 11:49:28-05:00, 2012:09:20 12:25:04-05:00, 2012:09:20 12:32:54-05:00, 2012:09:20 12:33:13-05:00, 2012:09:20 12:33:35-05:00, 2012:09:20 12:33:50-05:00, 2012:09:20 12:34:29-05:00, 2012:09:20 12:35:05-05:00, 2012:09:20 12:40:05-05:00, 2012:09:20 12:40:24-05:00, 2012:09:20 12:41:35-05:00, 2012:09:20 12:44:49-05:00, 2012:09:20 13:08:34-05:00, 2012:09:20 13:50:18-05:00, 2012:09:20 14:06:13-05:00, 2012:09:20 14:09:23-05:00, 2012:09:20 14:09:45-05:00, 2012:09:20 14:12:58-05:00, 2012:09:20 14:13:37-05:00, 2012:09:21 10:16:08-05:00, 2012:09:21 10:17:05-05:00, 2012:09:21 10:17:42-05:00, 2012:09:21 10:18:42-05:00, 2012:09:21 10:24:42-05:00, 2012:09:21 10:34:18-05:00, 2012:09:21 10:34:18-05:00, 2012:09:27 10:49:03-05:00, 2012:09:27 10:49:56-05:00, 2012:09:27 11:05:49-05:00, 2012:09:27 11:09:20-05:00, 2012:09:27 11:09:39-05:00, 2012:09:27 11:10:37-05:00, 2012:09:27 11:10:51-05:00, 2012:09:27 11:11:11-05:00, 2012:09:27 11:11:59-05:00, 2012:09:27 11:12:09-05:00, 2012:09:27 11:15:42-05:00, 2012:09:27 11:18:08-05:00, 2012:09:27 11:18:49-05:00, 2012:09:27 11:19:44-05:00, 2012:09:27 11:20:31-05:00, 2012:09:27 11:20:42-05:00, 2012:09:27 11:22:03-05:00, 2012:09:27 11:22:19-05:00, 2012:09:27 11:25:26-05:00, 2012:09:27 11:29:28-05:00, 2012:09:27 11:31:48-05:00, 2012:09:27 11:32:17-05:00, 2012:09:27 11:33-05:00, 2012:09:27 11:34:19-05:00, 2012:09:27 11:34:54-05:00, 2012:09:27 11:38:22-05:00, 2012:10:05 09:51:32-05:00, 2012:10:05 09:52:21-05:00, 2012:10:05 09:52:21-05:00, 2012:10:05 10:20-05:00, 2012:10:05 10:24:30-05:00, 2012:10:05 10:26:06-05:00, 2012:10:05 10:27:20-05:00, 2012:10:05 10:28:22-05:00, 2012:10:05 10:28:22-05:00, 2012:10:05 10:29:48-05:00, 2012:10:05 11:30:33-05:00, 2012:10:05 11:31:17-05:00, 2012:10:05 11:33:12-05:00, 2012:10:05 11:33:37-05:00, 2012:10:05 11:34:50-05:00, 2012:10:05 11:35:53-05:00, 2012:10:05 11:37:14-05:00, 2012:10:05 11:38:10-05:00, 2012:10:05 11:44:59-05:00, 2012:10:05 11:50:44-05:00, 2012:10:05 12:03:50-05:00, 2012:10:05 12:05:22-05:00, 2012:10:05 12:06:50-05:00, 2012:10:05 12:11:04-05:00, 2012:10:05 12:13:12-05:00, 2012:10:05 12:13:29-05:00, 2012:10:05 12:18:13-05:00, 2012:10:05 12:35:48-05:00, 2012:10:05 12:38:19-05:00, 2012:10:05 12:39:48-05:00, 2012:10:05 12:42:53-05:00, 2012:10:05 12:43:41-05:00, 2012:10:05 13:54:24-05:00, 2012:10:05 13:56:41-05:00, 2012:10:05 14:02:20-05:00, 2012:10:05 14:05:51-05:00, 2012:10:22 09:36:51-05:00, 2012:10:22 09:36:51-05:00, 2012:10:22 09:38:38-05:00, 2012:10:22 09:39:19-05:00, 2012:10:22 09:40:15-05:00, 2012:10:22 09:40:21-05:00, 2012:10:22 09:41:35-05:00, 2012:10:22 09:42:59-05:00, 2012:10:22 09:43:28-05:00, 2012:10:22 09:44:50-05:00, 2012:10:22 09:46:19-05:00, 2012:10:22 10:01:09-05:00, 2012:10:22 10:01:53-05:00, 2012:10:22 10:05:30-05:00, 2012:10:22 10:07:25-05:00, 2012:10:22 10:17:39-05:00, 2012:10:22 10:18:21-05:00, 2012:10:22 10:21:12-05:00, 2012:10:22 10:22:11-05:00, 2012:10:22 10:24:01-05:00, 2012:10:22 10:25:27-05:00, 2012:10:22 10:28:24-05:00, 2012:10:22 10:28:40-05:00, 2012:10:22 11:01:50-05:00, 2012:10:25 15:36:43-05:00, 2012:10:25 15:37:39-05:00, 2012:10:25 15:47:43-05:00, 2012:10:25 15:47:43-05:00, 2012:10:25 15:51:01-05:00, 2012:10:25 16:06:09-05:00, 2012:10:26 16:28:18-05:00, 2012:10:26 16:49:59-05:00, 2012:10:26 16:50:57-05:00, 2012:10:26 16:51:16-05:00, 2012:10:26 17:26:08-05:00, 2012:10:26 17:26:19-05:00, 2012:10:26 17:30:10-05:00, 2012:10:26 17:36:37-05:00, 2012:10:26 17:42:07-05:00, 2012:10:30 14:32:01-06:00, 2012:10:30 14:33:16-06:00, 2012:10:30 14:35:09-06:00, 2012:10:30 14:45:05-06:00, 2012:10:31 14:30:11-06:00, 2012:10:31 15:15:09-06:00, 2012:10:31 15:15:09-06:00, 2012:10:31 15:17:47-06:00, 2012:10:31 15:36:19-06:00, 2012:10:31 16:09:53-06:00, 2012:11:01 14:57:28-06:00, 2012:11:01 14:57:29-06:00, 2012:11:01 15:14:52-06:00, 2012:11:05 14:24:52-06:00, 2012:11:05 14:25:48-06:00, 2012:11:05 14:26:24-06:00, 2012:11:05 14:27:42-06:00, 2012:11:05 14:30:30-06:00, 2012:11:05 14:33:34-06:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:81CCDC8F162068118A6DF59E65D0CB92 Derived From Document ID : xmp.did:B95317C82D2068118A6D9BA71B1745C4 Derived From Original Document ID: xmp.did:F87F11740720681193E6F591A2A38F59 Derived From Rendition Class : default Doc Change Count : 14447 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 32EXIF Metadata provided by EXIF.tools