MCLEDHW 06 2011
2014-07-05
: Pdf 108797-Attachment 108797-Attachment 783936 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 12
KILLARK®
LED TECHNOLOGY
for Harsh
and Hazardous
Environments
HSI = GREEN
HUBBELL SUSTAINABILITY INITIATIVE
NEW!
HIGH
WATTAGE
Key Features and Benefits
• L70 55,000 hours life at 40°C (5+ years to 70% of initial output) equals Minimal
Maintenance.
• LM79-08 Certified Photometrics Tested (NIST Recognized Lab)
• LM80-08 Lumen Maintenance Measurement
• Solder-LESS LED Board Connections - Vibration Resistant
• Dual Drivers - Redundant Systems - Half of fixture can be turned off for greater
energy savings
• Less than 130 Watts of Power
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Crisp white light - 5000°K (CCT);70 CRI
• Wide variety of optics, including Globes, all glass Refractors, Reflectors,
Enclosed Reflectors
• Optional Mounting arrangements, including Pendant, Wall, Ceiling, Stanchion
and others
• Copper-Free Aluminum Construction with electrostatically applied
epoxy/polyester powder paint, plus Stainless Steel External Hardware for
Corrosion Resistance
• Traditional Industrial Appearance and Optical Performance
• Patented Swing-Barrel Nut labor saving mounting system
• Polycarbonate 12” spintop
suitable for Food Areas, Class II “G”
What Makes this Product GREEN?
LED
TECHNOLOGY
INDEX
VM4L Series - High Wattage 120 W Luminaires
Introduction…………………………………………………………....1
Catalog Logic………………………………………………………….2
Ordering Information………………………………………………....3,4
Components/Electrical Ratings/Temperature Data…………………….. 5,6
Dimensions……………………………………………………….….6,7
Photometrics………………………………………………….………..8
KILLARK® is pleased to announce HIGH WATTAGE LED sources in its
time-tested industrial grade luminaires for harsh and hazardous loca-
tions. Market demand for this labor and energy saving clean white light
is growing exponentially. Killark is there with high wattage fixtures
for harsh (wet, corrosive and NEMA 4X locations) plus hazardous duty
including Class I Division 2; Class II Divisions 1 & 2. With the new
offering, users can replace mid-size HID’s at greater mounting heights.
For 45 Watt LED Luminaires
MBL Compact VM1L Reduced Profile EML Explosion Proof
See Pg. 9 or www.hubbell.com for complete information.
• Saves Significant Maintenance Labor Time and $ (fewer trips for
relamping)
Hours Life
No. Trips
Killark LED 55,000 1.0
150HPS 24,000 2.3
175MH 10,000 5.5
150/175MHP 15,000 3.7
84CFL (2 x 42W) 10,000 5.5
300 Incan. 1,000 55.0
• Lower facility carbon footprint (emissions) by reducing electrician
maintenance trips to fixture
• Service Trucks: direct diesel or gas emissions
• Forklifts, Sissor-lifts, or Cherry Pickers: use utility electricity to
charge batteries, or gas
• High Color Rendering (5000°Kelvin - CCT; 70 CRI) for better visibility
can reduce the number of fixtures needed.
• The US DOE recognizes “Spectrally Enhanced Lighting”, particularly
at low light levels, as a method to maintain visual effectiveness
using fewer watts, e.g. vs HPS (2100°Kelvin - CCT; 21CRI) .
• Killark LED luminaires use RoHS compliant materials to minimize
environmental contamination
At 40°C Ambient Minimum LED Life to 70% of initial lumen ouput; HID, CFL,
Incandescent from mfg. catalog data
For more information go to
http://www1.eere.energy.gov/buildings/spectrally_enhanced.html
NEW OPTIC
“EZ” Mount Adapter
High Wattage
1
KILLARK LED
VM4L Series
VM4L
Introduction
Certified - File LR11713
Class I, Div. 2, Groups A,B,C,D
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
NEMA 3, 4X
IP66
LED
Technology
C US
FEATURES-SPECIFICATIONS
Applications
CERTILITE®V VM4L LED fixtures are designed
for installations where moisture, dirt, dust, cor-
rosion and vibration may be present, or NEMA
3 and 4X areas where wind, water, snow or
high ambients can be expected. They can be
used in locations made hazardous by the pres-
ence of flammable vapors or gases or combus-
tible dusts as defined by the NEC.
Typical applications include manufacturing
plants, and certain chemical and petrochemical
processing facilities, sewage treatment plants,
off-shore and dockside installations, garages
and storage facilities.
Compliances
• UL-8750 for LED lighting
• UL-844 Standard for lighting fixtures for haz-
ardous locations, Class I, Division 2; Class II,
Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminar-
ies for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X
• IP66
Materials
• Ballast tank, splice box and cast guards cor-
rosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, elec-
trostatically applied for complete, uniform
corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiberglass
or aluminum
LED Luminaire Features and Standards
• Traditional Industrial Appearance, Suitability,
and Photometric Performance
• Wide variety of optics including globes,
globes with reflectors, all-glass refractors, and
spin-top refractors
• Swing-Barrel Nut patented tank mounting
system
• Optional Mounting arrangements including
Pendant, Wall, Ceiling, Stanchion and others
• VM4L LED Housings can be retrofitted to exist-
ing VM splice boxes; upgrade from HID sources
• Crisp White Light for Excellent Color
Rendering - Chromaticity 5000°K (CCT); 70 CRI
• Energy Savings - less than 130 Watts of Power
• Long Life - 50,000 - 55,000 maintenance free
hours to 70% initial lumens
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections –
Vibration Resistant
• Dual Drivers - Redundant Systems (built-in
backup), or for additional energy savings half
of fixture can be turned off
• LM80-08* Measurement of lumen mainte-
nance for LED light sources
• LM79-08* Certified “Absolute” Photometry,
including Chromaticity Color for Solid State
Lighting
• L70 Values - Industry Nomenclature for Hours
of use to 70% of Initial Lumens
LED
123
Hang
Fixture Swing into Place Tighten
Available as Field or Factory Installed to save
energy when light not required.
Photo controls - Class I
Div. 2 / N4X areas
For easy fixture relocation or repair due to
impact damage.
Swing-Barrel Nut
* LM-xx are Illumination Engineering Society Standards designed to promote uniformity in testing procedures
among test labs and manufacturers. For more information go to www.ies.org
®
New Non-Glass
Polycarbonate 12”
Spin-Top Type V
Refractor
Class II Group G
Suitability @ 40°C
NEW!
NON-GLASS
FOOD SUITABILITY
2
KILLARK LED
VM4L Series High Wattage VM4L
Catalog Logic
Options/Accessories
F-Single Fuse
FF—Double Fuse
TBX—Terminal Blocks
X= Variations
(May be alphanumeric
to indicate terminals)
P1—Photocell 120V
Factory Installed
P2—Photocell 208-277V
Factory Installed
QD— QD Wired at Ballast
CP— Component Pack
(Tank w/mount,
optic, guard - LED’s
included in tank)
AN— Assembled
(Tank w/mount,
optic, guard- LED’s
included in tank)
Accessories —
See below
®
CertiLite®V LED Catalog Number Logic
Housing Series
7-3/4” thread w/driver
and LED’s
Voltage
30—120-277VAC 50/60 Hz
Mounting Type
A—Pendant
X—Ceiling
B—Wall Bracket
C—Cone Top
E—EZ Mount Adapter
D—Stanchion 25°
S—Stanchion Straight 90°
N— None (mount ordered separately)
Lamp Wattage
120—approx. VA (wattage)
of driver and LED’s
Guard
G— Guard
(Globes & Glass refractors)
N— No Guard
Optic
GL— Globe
R1— Type I Refractor (all glass)
R3— Type III Refractor (all glass)
R5— Type V Refractor (all glass)
ER—Enclosed Reflector
EP— Polycarbonate Shielded Enclosed Reflector*
P5—12” Polycarbonate Spin-Top*
S2—Type II 12” Spin-Top Glass Refractor
S5— Type V 12” Spin-Top Glass Refractor
FG—Silicone Coated Globe
TG— Teflon® -Coated Globe
T1—Teflon® Coated Type I Refractor (all glass)
T3—Teflon® Coated Type III Refractor (all glass)
T5— Teflon® Coated Type V Refractor (all glass)
T2— Teflon® Coated Type II 12” Spin-Top Refractor
TV— Teflon® Coated Type V 12” Spin-Top Refractor
Entry (Mounts available)
2—3/4” NPT (A,B,C,X)
3—1” NPT (A,B,C,X)
4—1 1/4” NPT (D,S)
5—1 1/2” NPT (D,S)
6—3/4” NPT 5-Hub (X)
7—1” NPT 5-Hub (X)
8—M20 4-Hub (X)
9—M25 5-Hub (X)
Z—EZ Mount Adapter
N— None (mount ordered separately)
* Non-glass Food Processing Suitability
VM4L 120 30 0 0 00 0 00
Completes as “EZ”, conduit mounting boxes ordered separately -
See catalog grids.
Completes as NN-Mount ordered separately
- Teflon® is a registered trademark of DuPont, Inc.
Accessories - Shown for ordering convenience (shipped separately).
S VMPSD40 Fiberglass White Reflector
A VMPA40 Fiberglass ANGLE White Reflector
D HRD400 Deep White Reflector
Z HRD400ALZ Deep Alzak Reflector
Fusing not for Canadian installations.
Photo cells for Class I, Div. 2 only.
QD = Quick Disconnect. Allows easy tank removal for maintenance.
Electrician simply unplugs tank from mount for fixture relocation or
repair due to impact damage.
Certified - File LR11713
Class I, Div. 2, Groups A,B,C,D
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
NEMA 3, 4X
IP66
C US
High Wattage
3
KILLARK LED
VM4L Series
Catalog numbers shown are with Guard (except ER/EP); to omit guard change ending G to N; e.g. VM4L12030A2GLN
Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1” e.g. VM1L4530A3GLG
- 120VAC through 277VAC 50/60Hz
ORDERING INFORMATION
VM4L SERIES PENDANT WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 3/4” 120-277VAC VM4L12030A2GLG VM4L12030A2R5G VM4L12030A2S5G VM4L12030A2P5G VM4L12030A2ERN VM4L12030A2EPN
VM4L SERIES CEILING WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 3/4” 120-277VAC VM4L12030X2GLG VM4L12030X2R5G VM4L12030X2S5G VM4L12030X2P5G VM4L12030X2ERN VM4L12030X2EPN
VM4L SERIES WALL WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 3/4” 120-277VAC VM4L12030B2GLG VM4L12030B2R5G VM4L12030B2S5G VM4L12030B2P5G VM4L12030B2ERN —
VM4L SERIES CONE WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 3/4” 120-277VAC VM4L12030C2GLG VM4L12030C2R5G VM4L12030C2S5G VM4L12030C2P5G VM4L12030C2ERN VM4L12030C2EPN
PENDANT
Globe/Guard
CEILING
Poly Food Optic
CONE
Poly Spin-Top
WALL
Refractor/Guard
VM4L
Ordering
Information
Wall Bracket
KILLARK LED
VM4L Series High Wattage VM4L
Ordering
Information 4
Catalog numbers shown are with Guard (except ER/EP); to omit guard change ending G to N; e.g. VM4L12030D5GLN
Catalog numbers shown are with 1-1/2” conduit openings; change “5” to “4” for 1-1.4”; e.g. VM4L12030D4GLG
- 120VAC through 277VAC 50/60Hz
VMEZA tank adapters UL “classified” as an assembly for use between VM tanks and EZ mounts. Order EZ mounts separately (see below).
ORDERING INFORMATION
VM4L SERIES 25” STANCHION WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 1-1/2” 120-277VAC VM4L12030D5GLG VM4L12030D5R5G VM4L12030D5S5G VM4L12030D5P5G VM4L12030D5ERN —
VM4L SERIES EZ ADAPTER WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 120-277VAC VM4L12030EZGLG VM4L12030EZR5G VM4L12030EZS5G VM4L12030EZP5G VM4L12030EZERN VM4L12030EZEPN
HUB SIZE
3/4”
1”
1-1/4”/1-1/2”*
CATALOG NUMBER
PENDANT CEILING BRACKET STANCHION
EZA2 EZX2 EZB2 —
EZA3 EZX3 EZB3 —
— — — EZD4A*
MOUNTING BOXES FOR EZ ADAPTER
25° Stanchion
Pendant Ceiling
*1-1/2” furnished with 1-1/2”-1-1/4” reducer and extension.
25° Stanchion
Enclosed Reflector
Straight Stanchion
Globe/Guard
EZ Adapter
Glass Spin-Top
VM4L SERIES STRAIGHT STANCHION WITH OPTIC AND GUARD
12” Spin-Top 12” Spin Top Polycarbonate
Hub Type V Glass Type V Glass Type V Polycarbonate Shielded Enclosed
Watts Size Voltage- Globe & Guard Refractor & Guard Refractor & Guard Refractor & Guard Enclosed Reflector Reflector
120 1-1/2” 120-277VAC VM4L12030S5GLG VM4L12030S5R5G VM4L12030S5S5G VM4L12030S5P5G VM4L12030S5ERN —
Order single-gang FS box separately. For photocell factory installed in tank, see logic.
- See online catalog page L223 for more information
Simlar to VMCHVM configured for Hazlux dimensions; Trademark of Thomas&Betts®
For use with Generator or UPS powered fixtures
For Wall applications mount must be spaced out
Guards are 316 Stainless. Bottom closure for VMAG25S pt. no. VMAGBC
High Wattage
5
KILLARK LED
VM4L Series
VM4L
Components
CERTILITE®V VM MOUNTING SPLICE BOXES
3/4”
1”
1-1/4”
1-1/2”
M-20
HUB SIZE
VMA2B
VMA3B
—
—
—
PENDANT
VMX2B
VMX3B
—
—
VMX8B**
CEILING 4 HUB
VMX6B
VMX7B
—
—
VMX9B
CEILING 5 HUB
VMB2B
VMB3B
—
—
—
WALL
VMC2B
VMC3B
—
—
—
CONE TOP
—
—
VMD4B
VMD5B
—
25 DEGREE STANCHION
—
—
VMS4B
VMS5B
—
90 DEGREE STANCHION
CATALOG NUMBER
Pendant Ceiling Wall
25° Stanchion
Cone Top
Straight Stanchion EZ Adapter*
VMEZA
* VMEZA is used between a ballast tank and an EZ mount-ordered separately. See catalog grids.
* *VMX8B furnished with 3 non-metallic plugs.
Tank Adapter
DESCRIPTION OPTIC (LOGIC) GUARD
VM4L LED OPTICS AND ACCESSORIES
Globe (glass)
Refractor (all glass) Type I
Refractor (all glass) Type III
Refractor(all glass) Type V
Enclosed Reflector
Enclosed Reflector with Polycarbonate Lens*
Refractor (Polycarbonate spin top) 12” Type V*
Refractor (glass spin top) 12” Type V
Refractor (glass spin top) 12” Type II
Globe (Silicone coated)
Globe Teflon® coated
Refractor Teflon® coated (all glass) Type I
Refractor Teflon® coated (all glass) Type III
Refractor Teflon® coated (all glass) Type V
Refractor Teflon® coated (spin top) 12” Type V
Refractor Teflon® coated (spin top) 12” Type II
VMG25 (GL)
VMR251 (R1)
VMR253 (R3)
VMR255 (R5)
VMER40 (ER)
VMEP40 (EP)
VZRP175B (P5)
VZRG4050 (S5)
VZRG4020 (S2)
VMG25F (FG)
VMG25T (TG)
VMR251T (T1)
VMR253T (T3)
VMR255T (T5)
VZRG4050T (T2)
VZRG4020T (T2)
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMERG
—
VMRWGS
VMRWGS
VMRWGS
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMRWGS
VMRWGS
*Non-Glass over Food/Grain Class II Div 1 Group G Certified; VMEP40 to 55°C; VZRP175B TO 40°C
Teflon is a registered trademark of DuPont, Inc.
DOME REFLECTOR (Polyester reinforced fiberglass)
ANGLE REFLECTOR (Polyester reinforced fiberglass)
DEEP DOME REFLECTOR (White Painted Aluminum)
DEEP DOME REFLECTOR (Anodized Aluminum)
120VAC Photocell with FS Style Cover
208-277VAC Photocell with FS Style Cover
Tank adapter to Crouse-Hinds®- VM Series mounts
Tank adapter to Hazlux® 3 Series mounts
Bottom Closure for VMAG25S
4-sided EXIT Accessory (use without guard)
VMPSD40
VMPA40
HRD400
HRD400ALZ
VMFSPC1
VMFSPC2
VMCHVM
VMHLDS
VMAGBC
VEXA400
VM4L LED REFLECTORS AND ACCESSORIES
VMG25 VMR255
VMR255
VMR255
VAMG25S
VMER40 VMERG VMEP40
VAMGBC
VZRG/VZRP VMRWGS
VMPSD40
Standard Dome, Fiberglass
White Reflector, 16” Dia.
VMPA40
30° Angle, Fiberglass
White Reflector, 16” Dia.
HRD400
Deep Aluminum White
Reflector, 21” Dia.
HRD400ALZ
Deep Aluminum Anodized
Reflector, 21” Dia.
VMFSPC VEXA400
KILLARK LED
VM4L Series High Wattage
6
Driver THD < 20%, Powerfactor 99% @ 120V; Line Regulation 2%; Load regulation 5%; Protected against Over-voltage and Over-current.
CIL = Calculated Initial Lumens of LED component based on mfg. data and driver current INSIDE the optic. This value is provided as a reference only for comparison to traditional light sources such as
incandescent, HID, or fluorescent which use initial values in “relative” photometry. KILLARK LED luminaires are tested using the Absolute photometry method (LM79-08), which calculates delivered
lumens only. KILLARK’s LED luminaires provide very bright white 5000O K (CCT) color and can appear brighter than traditional light sources with higher lumen values under both photopic and scotopic
conditions.
- All optics suitable for 55O C except VRZP175B which is limited to 40O C
CAT. NO. VOLTAGE 50/60HZ WATTAGE AMPS 120/277 CIL WEIGHT
VM4L LED HOUSINGS & GLOBE, DRIVERS AND LEDS - ELECTRICAL RATINGS
VM4L12030 120-277VAC 123.9 1.04/.45 10560 25.5 LBS
CAT. NO. AMBIENT C1D2 C2D1 L70 SUPPLY WIRE
THERMAL PERFORMANCE DATA
40OC T4A T3C (EFG) 55,000 HRS 75O C
55OC- T4 T3C (EFG) 50,000 HRS 90O C
VM4L12030
VM4L
T-codes, Electrical
& Thermal Ratings,
Dimensions
VM4L Pendant w/VMG or VMR and Guard
Stanchion (90°) Mount
Stanchion (25°) Mount
Wall Bracket Mount
Pendant Mount
Ceiling Mount Cone Mount
7
KILLARK LED
VM4L Series High Wattage VM4L
Dimensions
VM4L w/VMER40 Enclosed Reflector and Guard
VM4L w/ 12” Spin-Top Refractor
VM4L w/ VMEP40 Food Optic
VM4L w/ VMG and Dome Reflector
VM4L w/ VMG or VMR and Guard VM4L w/ VMG and Angle Refractor and Guard
KILLARK LED
VM4L Series High Wattage VM4L
Photometrics 8
Zonal Lumen Summary
Zone Lumens %Lamp %Fixt
0-30 1293 N.A. 20.3%
0-40 2342 N.A. 36.8%
0-60 4570 N.A. 71.8%
0-90 6279 N.A. 98.6%
90-120 56 N.A. 0.9%
90-130 72 N.A. 1.1%
90-150 87 N.A. 1.4%
90-180 89 N.A. 1.4%
0-180 6369 N.A. 100
Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.4
LED 120 Watt
Globe VMG25
LED 120 Watt
Globe
and Dome
Reflector
LED 120 Watt
Glass Type V
Refractor
Chromaticity 5016.1 K° (CCT); 71.2 CRI
Certified Report BAL16089.0
Chromaticity 4965.1 K° (CCT); 71.0 CRI
Certified Report BAL16090.0
Chromaticity 5006.8 K° (CCT); 71.6 CRI
Certified Report BAL16091.0
Zonal Lumen Summary
Zone Lumens %Lamp %Fixt
0-30 1613 N.A. 28.3%
0-40 2853 N.A. 50.1%
0-60 5163 N.A. 90.7%
0-90 5673 N.A. 99.6%
90-120 14 N.A. 0.2%
90-130 16 N.A. 0.3%
90-150 20 N.A. 0.3%
90-180 21 N.A. 0.4%
0-180 5694 N.A. 100
Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.4
Zonal Lumen Summary
Zone Lumens %Lamp %Fixt
0-30 1366 N.A. 23.6%
0-40 2245 N.A. 38.8%
0-60 4032 N.A. 69.7%
0-90 5064 N.A. 87.5%
90-120 379 N.A. 6.6%
90-130 530 N.A. 9.2%
90-150 706 N.A. 12.2%
90-180 723 N.A. 12.5%
0-180 5787 N.A. 100
Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.3
9
KILLARK LED
Low Wattage 22 & 45 Watt Fixtures
Certified - File LR11713
Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
UL Marine
NEMA 3, 4X
C US
Features MBL Series
• LED Source provides 2,900 lumens (Globe)
using less than 50W of power, or 1,400
lumens using 25W of power.
• Energy savings combine with long life
(50,000 to 60,000 maintenance-free hours),
with excellent color rendering and instant on.
• Compact in size, MBL LED luminaires
are available with glass globes, all-glass
refractors or spin-top refractors.
• Ambient suitability -40°C to +55°C.
Features VM1L Series
• LED Source provides 3,000 lumens (Globe)
using less than 50W of power.
• Energy savings combine with long life
(50,000 to 55,000 maintenance-free hours),
with excellent color rendering and instant on.
• Lowest profile configuration in the
CertiLite®V Series with it’s unique features.
Available with globes, all-glass refractors,
or spin-top refractors
• Factory installed photocells available.
• Ambient suitability -40°C to +55°C.
Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
UL Marine
NEMA 3, 4, 4X; IP66
Class I, Div. I, Groups C,D
Class I, Zone 1 Groups IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
Suitable for wet locations
Marine
NEMA 3, 4, 4X
Factory Sealed
Features EML Series
• LED Source provides 2,900 lumens (Globe)
using less than 50W of power.
• Energy savings combine with long life
(50,000 to 55,000 maintenance-free hours),
with excellent color rendering and instant on.
• Factory sealed - no external seal required.
Simply wire mounting cap and thread in
fixture to install.
• Ambient suitability -30°C to +55°C.
Certified - File LR11713
C US
Refer to on-line catalog for com-
plete information on low wattage
LED fixtures.
www.hubbell-killark.com
MBL Series 22 & 45 Watt
Compact Size
VM1L Series 45 Watt
Reduced Profile
EML Series 45 Watt
Explosion Proof
CONSULT ONLINE CATALOG FOR OTHER AVAILABLE MOUNT SIZES & OPTICS
Certified - File LR11713
C US
CONSULT ONLINE CATALOG FOR OTHER AVAILABLE MOUNT SIZES & OPTICS
3940 M.L. King Dr. St. Louis, MO 63119
TEL: (314) 531-0460 FAX: (314) 531-7164
www.hubbell-killark.com
Printed on 100% recycled paper
RACO® BELL® KILLARK® HAWKE® CHALMIT® WIEGMANN®
MCLEDHW 06-11
©2011 Hubbell Incorporated (Delaware)
