MCLEDHW 06 2011

: Pdf 108797-Attachment 108797-Attachment 783936 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

KILLARK

®

LED TECHNOLOGY
for Harsh
and Hazardous
Environments
NEW!
HIGH
WATTAGE

HSI = GREEN
HUBBELL SUSTAINABILITY INITIATIVE

LED
TECHNOLOGY

KILLARK® is pleased to announce HIGH WATTAGE LED sources in its
time-tested industrial grade luminaires for harsh and hazardous locations. Market demand for this labor and energy saving clean white light
is growing exponentially. Killark is there with high wattage fixtures
for harsh (wet, corrosive and NEMA 4X locations) plus hazardous duty
including Class I Division 2; Class II Divisions 1 & 2. With the new
offering, users can replace mid-size HID’s at greater mounting heights.

What Makes this Product GREEN?
• Saves Significant Maintenance Labor Time and $ (fewer trips for
relamping)
Hours Life 
No. Trips
Killark LED
55,000
1.0
150HPS
24,000
2.3
175MH
10,000
5.5
150/175MHP
15,000
3.7
84CFL (2 x 42W)
10,000
5.5
300 Incan.
1,000
55.0
• Lower facility carbon footprint (emissions) by reducing electrician
maintenance trips to fixture
• Service Trucks: direct diesel or gas emissions
• Forklifts, Sissor-lifts, or Cherry Pickers: use utility electricity to
charge batteries, or gas
• High Color Rendering (5000°Kelvin - CCT; 70 CRI) for better visibility
can reduce the number of fixtures needed.
• The US DOE recognizes “Spectrally Enhanced Lighting”, particularly
at low light levels, as a method to maintain visual effectiveness
using fewer watts, e.g. vs HPS (2100°Kelvin - CCT; 21CRI) .
• Killark LED luminaires use RoHS compliant materials to minimize
environmental contamination

INDEX
VM4L Series - High Wattage 120 W Luminaires
Introduction…………………………………………………………....1
Catalog Logic………………………………………………………….2
Ordering Information………………………………………………....3,4
Components/Electrical Ratings/Temperature Data……………………..5,6
Dimensions……………………………………………………….….6,7
Photometrics………………………………………………….………..8
Key Features and Benefits
• L70 55,000 hours life at 40°C (5+ years to 70% of initial output) equals Minimal
Maintenance.
• LM79-08 Certified Photometrics Tested (NIST Recognized Lab)
• LM80-08 Lumen Maintenance Measurement
• Solder-LESS LED Board Connections - Vibration Resistant
• Dual Drivers - Redundant Systems - Half of fixture can be turned off for greater
energy savings
• Less than 130 Watts of Power
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Crisp white light - 5000°K (CCT);70 CRI
• Wide variety of optics, including Globes, all glass Refractors, Reflectors,
Enclosed Reflectors
• Optional Mounting arrangements, including Pendant, Wall, Ceiling, Stanchion
and others
• Copper-Free Aluminum Construction with electrostatically applied
epoxy/polyester powder paint, plus Stainless Steel External Hardware for
Corrosion Resistance
• Traditional Industrial Appearance and Optical Performance
• Patented Swing-Barrel Nut labor saving mounting system
• Polycarbonate 12” spintop
suitable for Food Areas, Class II “G”
NEW OPTIC

For 45 Watt LED Luminaires
MBL Compact
VM1L Reduced Profile

EML Explosion Proof


At 40°C Ambient Minimum LED Life to 70% of initial lumen ouput; HID, CFL,
Incandescent from mfg. catalog data


For more information go to

http://www1.eere.energy.gov/buildings/spectrally_enhanced.html

See Pg. 9 or www.hubbell.com for complete information.

KILLARK LED
VM4L Series

VM4L
Introduction

High Wattage
LED
Technology

Class I, Div. 2, Groups A,B,C,D
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
NEMA 3, 4X
IP66
C

US Certified - File LR11713

FEAT UR E S - S P E C IF IC A T IO N S

®

LED

Applications
CERTILITE®V VM4L LED fixtures are designed
for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA
3 and 4X areas where wind, water, snow or
high ambients can be expected. They can be
used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC.
Typical applications include manufacturing
plants, and certain chemical and petrochemical
processing facilities, sewage treatment plants,
off-shore and dockside installations, garages
and storage facilities.
Compliances
• UL-8750 for LED lighting
• UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II,
Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X
• IP66
Materials
• Ballast tank, splice box and cast guards corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform
corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiberglass
or aluminum
LED Luminaire Features and Standards
• Traditional Industrial Appearance, Suitability,
and Photometric Performance
• Wide variety of optics including globes,
globes with reflectors, all-glass refractors, and
spin-top refractors

• Swing-Barrel Nut patented tank mounting
system
• Optional Mounting arrangements including
Pendant, Wall, Ceiling, Stanchion and others
• VM4L LED Housings can be retrofitted to existing VM splice boxes; upgrade from HID sources
• Crisp White Light for Excellent Color
Rendering - Chromaticity 5000°K (CCT); 70 CRI
• Energy Savings - less than 130 Watts of Power
• Long Life - 50,000 - 55,000 maintenance free
hours to 70% initial lumens
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz

• Solder-LESS LED Board Connections –
Vibration Resistant
• Dual Drivers - Redundant Systems (built-in
backup), or for additional energy savings half
of fixture can be turned off
• LM80-08* Measurement of lumen maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry,
including Chromaticity Color for Solid State
Lighting
• L70 Values - Industry Nomenclature for Hours
of use to 70% of Initial Lumens

* LM-xx are Illumination Engineering Society Standards designed to promote uniformity in testing procedures
among test labs and manufacturers. For more information go to www.ies.org

Swing-Barrel Nut

1

2
Hang
Fixture

3

Swing into Place

Photo controls - Class I
Div. 2 / N4X areas

Available as Field or Factory Installed to save
energy when light not required.

New Non-Glass
Polycarbonate 12”
Spin-Top Type V
Refractor
Class II Group G
Suitability @ 40°C

Tighten

NEW!

NON-GLASS
FOOD SUITABILITY

“EZ” Mount Adapter

For easy fixture relocation or repair due to
impact damage.

1

KILLARK LED
VM4L Series

VM4L
Catalog Logic

High Wattage

Class I, Div. 2, Groups A,B,C,D
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
NEMA 3, 4X
IP66

®

Certi L i t e ® V LE D Ca t a lo g Nu mber Logi c

VM4L

120 30

0

0

00

C

0



US Certified - File LR11713

00

Housing Series
7-3/4” thread w/driver
and LED’s

Options/Accessories

Lamp Wattage

Guard

120—approx. VA (wattage)
of driver and LED’s

G—Guard
(Globes & Glass refractors)
N—No Guard

Voltage
30—120-277VAC 50/60 Hz

Mounting Type
A—Pendant
X—Ceiling
B—Wall Bracket
C—Cone Top
E—EZ Mount Adapter
D—Stanchion 25°
S—Stanchion Straight 90°
N—None (mount ordered separately)

Optic
GL—Globe
R1—Type I Refractor (all glass)
R3—Type III Refractor (all glass)
R5—Type V Refractor (all glass)
ER—Enclosed Reflector
EP—Polycarbonate Shielded Enclosed Reflector*
P5—12” Polycarbonate Spin-Top*
S2—Type II 12” Spin-Top Glass Refractor
S5—Type V 12” Spin-Top Glass Refractor
FG—Silicone Coated Globe
TG—Teflon Coated Globe
®

Entry (Mounts available)

T1—Teflon® Coated Type I Refractor (all glass)

2—3/4” NPT (A,B,C,X)
3—1” NPT (A,B,C,X)
4—1 1/4” NPT (D,S)
5—1 1/2” NPT (D,S)
6—3/4” NPT 5-Hub (X)
7—1” NPT 5-Hub (X)
8—M20 4-Hub (X)
9—M25 5-Hub (X)
Z—EZ Mount Adapter
N—None (mount ordered separately)

T3—Teflon® Coated Type III Refractor (all glass)

* Non-glass Food Processing Suitability

F-Single Fuse
FF—Double Fuse
TBX—Terminal Blocks
X= Variations
(May be alphanumeric
to indicate terminals)
P1—Photocell 120V

Factory Installed
P2—Photocell 208-277V

Factory Installed
QD—QD Wired at Ballast
CP—Component Pack
(Tank w/mount,
optic, guard - LED’s
included in tank)
AN—Assembled
(Tank w/mount,
optic, guard- LED’s
included in tank)
Accessories —
See  below

T5—Teflon® Coated Type V Refractor (all glass)
T2—Teflon® Coated Type II 12” Spin-Top Refractor
TV—Teflon® Coated Type V 12” Spin-Top Refractor
 Completes as “EZ”, conduit mounting boxes ordered separately See catalog grids.
Completes as NN-Mount ordered separately
 Teflon® is a registered trademark of DuPont, Inc.

Accessories - Shown for ordering convenience (shipped separately).
S
VMPSD40
Fiberglass White Reflector
A
VMPA40
Fiberglass ANGLE White Reflector
D
HRD400
Deep White Reflector
Z
HRD400ALZ
Deep Alzak Reflector
Fusing not for Canadian installations.
Photo cells for Class I, Div. 2 only.

QD = Quick Disconnect. Allows easy tank removal for maintenance. 





Electrician simply unplugs tank from mount for fixture relocation or
repair due to impact damage.

2

KILLARK LED
VM4L Series

High Wattage

PENDANT
Globe/Guard

CEILING
Poly Food Optic

WALL
Refractor/Guard

VM4L
Ordering
Information

CONE
Poly Spin-Top

ORD E R I NG I N F O RM A T IO N
VM 4 L S E R I ES P E N DA N T W IT H O PTIC A ND G U A R D

Globe & Guard

Type V Glass
Refractor & Guard

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030A2GLG

VM4L12030A2R5G

VM4L12030A2S5G

VM4L12030A2P5G

VM4L12030A2ERN

VM4L12030A2EPN

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030X2ERN

VM4L12030X2EPN


Watts

Hub
Size

Voltage

120

3/4”

120-277VAC

VM 4 L S E R I ES C E I L I N G W ITH O PT IC A ND G U A R D

Watts

Hub
Size

Voltage

Globe & Guard

Type V Glass
Refractor & Guard

120

3/4”

120-277VAC

VM4L12030X2GLG

VM4L12030X2R5G

VM4L12030X2S5G

VM4L12030X2P5G

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030B2ERN

—

VM 4 L S E R I ES WA L L W IT H O PTIC A ND G U A R D

Watts

Hub
Size

Voltage

Globe & Guard

Type V Glass
Refractor & Guard

120

3/4”

120-277VAC

VM4L12030B2GLG

VM4L12030B2R5G

VM4L12030B2S5G

VM4L12030B2P5G

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030C2S5G

VM4L12030C2P5G

VM4L12030C2ERN

VM4L12030C2EPN

VM 4 L S E R I ES C O N E W IT H O PTIC A ND G U A R D

Watts

Hub
Size

Voltage

Globe & Guard

Type V Glass
Refractor & Guard

120

3/4”

120-277VAC

VM4L12030C2GLG

VM4L12030C2R5G

Catalog numbers shown are with Guard (except ER/EP); to omit guard change ending G to N; e.g. VM4L12030A2GLN
Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1” e.g. VM1L4530A3GLG
120VAC through 277VAC 50/60Hz

3

KILLARK LED
VM4L Series

High Wattage

25° Stanchion
Enclosed Reflector

Straight Stanchion
Globe/Guard

VM4L
Ordering
Information

EZ Adapter
Glass Spin-Top

OR DER I NG I NF ORM A T IO N
VM 4 L S ER I ES 2 5 ” S TA N C H IO N W ITH O PT IC A ND G U A R D

Globe & Guard

Type V Glass
Refractor & Guard

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030D5GLG

VM4L12030D5R5G

VM4L12030D5S5G

VM4L12030D5P5G

VM4L12030D5ERN

—

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030S5S5G

VM4L12030S5P5G

VM4L12030S5ERN

—

12” Spin-Top
Type V Glass
Refractor & Guard

12” Spin Top
Type V Polycarbonate
Refractor & Guard

Enclosed Reflector

Polycarbonate
Shielded Enclosed
Reflector

VM4L12030EZS5G

VM4L12030EZP5G

VM4L12030EZERN

VM4L12030EZEPN


Watts

Hub
Size

Voltage

120

1-1/2”

120-277VAC

VM 4 L S ER I ES S T R A I G H T S TA NC H IO N W ITH O PT IC A ND G U A R D

Watts

Hub
Size

Voltage

Globe & Guard

Type V Glass
Refractor & Guard

120

1-1/2”

120-277VAC

VM4L12030S5GLG

VM4L12030S5R5G

VM 4 L S ER I ES E Z A DA P T ER W IT H O PTIC A ND G U A R D

Watts

Hub
Size

Voltage

Globe & Guard

Type V Glass
Refractor & Guard

120



120-277VAC

VM4L12030EZGLG

VM4L12030EZR5G

Catalog numbers shown are with Guard (except ER/EP); to omit guard change ending G to N; e.g. VM4L12030D5GLN
Catalog numbers shown are with 1-1/2” conduit openings; change “5” to “4” for 1-1.4”; e.g. VM4L12030D4GLG
120VAC through 277VAC 50/60Hz
VMEZA tank adapters UL “classified” as an assembly for use between VM tanks and EZ mounts. Order EZ mounts separately (see below).

Pendant

Ceiling

Wall Bracket

25° Stanchion

MOUNTING BOXES FOR EZ ADAPTER
CATALOG NUMBER
BRACKET

PENDANT

CEILING

STANCHION

HUB SIZE

EZA2

EZX2

EZB2

—

3/4”

EZA3
—

EZX3
—

EZB3
—

—
EZD4A*

*1-1/2” furnished with 1-1/2”-1-1/4” reducer and extension.

1”
1-1/4”/1-1/2”*

4

KILLARK LED
VM4L Series

VM4L
Components

High Wattage

Pendant

Ceiling

Wall

25° Stanchion

Straight Stanchion

EZ Adapter*
VMEZA

Cone Top

Tank Adapter

CERTILITE®V VM MOUNTING SPLICE BOXES
CATALOG NUMBER
HUB SIZE

PENDANT

CEILING 4 HUB

CEILING 5 HUB

WALL

CONE TOP

25 DEGREE STANCHION

90 DEGREE STANCHION

3/4”
1”

VMA2B
VMA3B

VMX2B
VMX3B

VMX6B
VMX7B

VMB2B
VMB3B

VMC2B
VMC3B

—
—

—
—

1-1/4”

—

—

—

—

—

VMD4B

VMS4B

1-1/2”

—

—

—

—

—

VMD5B

VMS5B

M-20

—

VMX8B**

VMX9B

—

—

—

—

*VMEZA is used between a ballast tank and an EZ mount-ordered separately. See catalog grids.
**VMX8B furnished with 3 non-metallic
plugs.
VM4L LED OPTICS AND ACCESSORIES
DESCRIPTION
Globe (glass)
Refractor (all glass) Type I
Refractor (all glass) Type III
Refractor(all glass) Type V
Enclosed Reflector
Enclosed Reflector with Polycarbonate Lens*
Refractor (Polycarbonate spin top) 12” Type V*
Refractor (glass spin top) 12” Type V
Refractor (glass spin top) 12” Type II
Globe (Silicone coated)
Globe Teflon® coated 
Refractor Teflon® coated (all glass) Type I
Refractor Teflon® coated (all glass) Type III
Refractor Teflon® coated (all glass) Type V
Refractor Teflon® coated (spin top) 12” Type V
Refractor Teflon® coated (spin top) 12” Type II

OPTIC (LOGIC)
VMG25 (GL)
VMR251 (R1)
VMR253 (R3)
VMR255 (R5)
VMER40 (ER)
VMEP40 (EP) 
VZRP175B (P5)
VZRG4050 (S5)
VZRG4020 (S2)
VMG25F (FG)
VMG25T (TG)
VMR251T (T1)
VMR253T (T3)
VMR255T (T5)
VZRG4050T (T2)
VZRG4020T (T2)

GUARD
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMERG
—
VMRWGS
VMRWGS
VMRWGS
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMAG25S
VMRWGS
VMRWGS

VMG25

VMR255
VMR255
VMR255

VAMG25S

VAMGBC

VMER40

VMERG

VZRG/VZRP

VMRWGS

VMEP40

*Non-Glass over Food/Grain Class II Div 1 Group G Certified; VMEP40 to 55°C; VZRP175B TO 40°C
Teflon is a registered trademark of DuPont, Inc.
VM4L LED REFLECTORS AND ACCESSORIES
DOME REFLECTOR (Polyester reinforced fiberglass)
ANGLE REFLECTOR (Polyester reinforced fiberglass)
DEEP DOME REFLECTOR (White Painted Aluminum)
DEEP DOME REFLECTOR (Anodized Aluminum)
120VAC Photocell with FS Style Cover
208-277VAC Photocell with FS Style Cover
Tank adapter to Crouse-Hinds® VM Series mounts
Tank adapter to Hazlux® 3 Series mounts
Bottom Closure for VMAG25S
4-sided EXIT Accessory (use without guard)

VMPSD40
VMPA40
HRD400
HRD400ALZ
VMFSPC1
VMFSPC2
VMCHVM
VMHLDS
VMAGBC
VEXA400

VMPSD40
Standard Dome, Fiberglass
White Reflector, 16” Dia.

HRD400
Deep Aluminum White
Reflector, 21” Dia.

VMPA40
30° Angle, Fiberglass
White Reflector, 16” Dia.

HRD400ALZ
Deep Aluminum Anodized
Reflector, 21” Dia.

 Order single-gang FS box separately. For photocell factory installed in tank, see logic.
 See online catalog page L223 for more information
 Simlar to VMCHVM configured for Hazlux dimensions; Trademark of Thomas&Betts®
 For use with Generator or UPS powered fixtures
 For Wall applications mount must be spaced out
 Guards are 316 Stainless. Bottom closure for VMAG25S pt. no. VMAGBC
VMFSPC

VEXA400

5

KILLARK LED
VM4L Series

VM4L12030

T-codes, Electrical
& Thermal Ratings,
Dimensions

THERMAL PERFORMANCE DATA

VM4L LED HOUSINGS & GLOBE, DRIVERS AND LEDS - ELECTRICAL RATINGS
CAT. NO.

VM4L

High Wattage

VOLTAGE 50/60HZ

WATTAGE

AMPS 120/277

CIL

WEIGHT

120-277VAC

123.9

1.04/.45

10560

25.5 LBS

CAT. NO.
VM4L12030

AMBIENT
40OC
55OC

C1D2

C2D1

L70

SUPPLY WIRE

T4A
T4

T3C (EFG)
T3C (EFG)

55,000 HRS
50,000 HRS

75O C
90O C

 Driver THD < 20%, Powerfactor 99% @ 120V; Line Regulation 2%; Load regulation 5%; Protected against Over-voltage and Over-current.
 CIL = Calculated Initial Lumens of LED component based on mfg. data and driver current INSIDE the optic. This value is provided as a reference only for comparison to traditional light sources such as
incandescent, HID, or fluorescent which use initial values in “relative” photometry. KILLARK LED luminaires are tested using the Absolute photometry method (LM79-08), which calculates delivered
lumens only. KILLARK’s LED luminaires provide very bright white 5000O K (CCT) color and can appear brighter than traditional light sources with higher lumen values under both photopic and scotopic
conditions.
 All optics suitable for 55O C except VRZP175B which is limited to 40O C

Pendant Mount
Ceiling Mount

Cone Mount

Stanchion (90°) Mount
Wall Bracket Mount

Stanchion (25°) Mount

VM4L Pendant w/VMG or VMR and Guard

6

KILLARK LED
VM4L Series

High Wattage

VM4L w/ VMG or VMR and Guard

VM4L w/ VMG and Dome Reflector

VM4L w/ VMEP40 Food Optic

VM4L
Dimensions

VM4L w/ VMG and Angle Refractor and Guard

VM4L w/ 12” Spin-Top Refractor

VM4L w/VMER40 Enclosed Reflector and Guard

7

KILLARK LED
VM4L Series
LED 120 Watt
Globe VMG25

Zonal Lumen Summary
Zone
Lumens %Lamp
0-30
1293
N.A.
0-40
2342
N.A.
0-60
4570
N.A.
0-90
6279
N.A.
90-120 56
N.A.
90-130 72
N.A.
90-150 87
N.A.
90-180 89
N.A.
0-180
6369
N.A.

High Wattage

LED 120 Watt
Glass Type V
Refractor

LED 120 Watt
Globe
and Dome
Reflector
%Fixt
20.3%
36.8%
71.8%
98.6%
0.9%
1.1%
1.4%
1.4%
100

Zonal Lumen Summary
Zone
Lumens %Lamp
0-30
1613
N.A.
0-40
2853
N.A.
0-60
5163
N.A.
0-90
5673
N.A.
90-120 14
N.A.
90-130 16
N.A.
90-150 20
N.A.
90-180 21
N.A.
0-180
5694
N.A.

VM4L
Photometrics

%Fixt
28.3%
50.1%
90.7%
99.6%
0.2%
0.3%
0.3%
0.4%
100

Zonal Lumen Summary
Zone
Lumens %Lamp
0-30
1366
N.A.
0-40
2245
N.A.
0-60
4032
N.A.
0-90
5064
N.A.
90-120 379
N.A.
90-130 530
N.A.
90-150 706
N.A.
90-180 723
N.A.
0-180
5787
N.A.

%Fixt
23.6%
38.8%
69.7%
87.5%
6.6%
9.2%
12.2%
12.5%
100

Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.4

Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.4

Absolute Photometry
Total Luminaire Efficiency = N.A.%
Spacing to Mounting Height Ratio 1.3

Chromaticity 5016.1 K° (CCT); 71.2 CRI
Certified Report BAL16089.0

Chromaticity 4965.1 K° (CCT); 71.0 CRI
Certified Report BAL16090.0

Chromaticity 5006.8 K° (CCT); 71.6 CRI
Certified Report BAL16091.0

8

KILLARK LED
Low Wattage

22 & 45 Watt Fixtures

MBL Series 22 & 45 Watt
Compact Size
Features MBL Series
• LED Source provides 2,900 lumens (Globe)
using less than 50W of power, or 1,400
lumens using 25W of power.
• Energy savings combine with long life
(50,000 to 60,000 maintenance-free hours),
with excellent color rendering and instant on.
• Compact in size, MBL LED luminaires
are available with glass globes, all-glass
refractors or spin-top refractors.
• Ambient suitability -40°C to +55°C.

Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
UL Marine
NEMA 3, 4X
C

US

Certified - File LR11713

CONSULT ONLINE CATALOG FOR OTHER AVAILABLE MOUNT SIZES & OPTICS

VM1L Series 45 Watt
Reduced Profile
Features VM1L Series
• LED Source provides 3,000 lumens (Globe)
using less than 50W of power.
• Energy savings combine with long life
(50,000 to 55,000 maintenance-free hours),
with excellent color rendering and instant on.
• Lowest profile configuration in the
CertiLite®V Series with it’s unique features.
Available with globes, all-glass refractors,
or spin-top refractors
• Factory installed photocells available.
• Ambient suitability -40°C to +55°C.

EML Series 45 Watt
Explosion Proof
Features EML Series
• LED Source provides 2,900 lumens (Globe)
using less than 50W of power.
• Energy savings combine with long life
(50,000 to 55,000 maintenance-free hours),
with excellent color rendering and instant on.
• Factory sealed - no external seal required.
Simply wire mounting cap and thread in
fixture to install.
• Ambient suitability -30°C to +55°C.
Refer to on-line catalog for complete information on low wattage
LED fixtures.
www.hubbell-killark.com

Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
UL Marine
NEMA 3, 4, 4X; IP66
C

US

Certified - File LR11713

CONSULT ONLINE CATALOG FOR OTHER AVAILABLE MOUNT SIZES & OPTICS

Class I, Div. I, Groups C,D
Class I, Zone 1 Groups IIB, IIA
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
Suitable for wet locations
Marine
NEMA 3, 4, 4X
Factory Sealed
C

US

Certified - File LR11713

9

3940 M.L. King Dr. St. Louis, MO 63119
TEL: (314) 531-0460 FAX: (314) 531-7164
www.hubbell-killark.com
Printed on 100% recycled paper

RACO® BELL® KILLARK® HAWKE® CHALMIT® WIEGMANN®
MCLEDHW 06-11
©2011 Hubbell Incorporated (Delaware)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2011:06:17 15:21:15-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:06:17 15:21:15-04:00
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Format                          : application/pdf
Title                           : MCLEDHW 06-2011.indd
Creator                         : psabate
Document ID                     : uuid:f46860f2-9f42-4890-a59c-0e60cb30bc30
Instance ID                     : uuid:1884e7ab-9b33-4f37-9136-8cfc3a27a3ad
Page Count                      : 12
Author                          : psabate

EXIF Metadata provided by EXIF.tools