108822 Catalog
2014-09-05
: Pdf 108822-Catalog 108822-Catalog 784610 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 660
| Download | |
| Open PDF In Browser | View PDF |
Rentals
Safety
OnSite Supply
Abrasives
Tools
Pipe Hangers
Threaded Rod
Strut
Anchors
Fasteners
NEFCO'S DELIVERY FLEET
4 DISTRIBUTION CENTERS
HARTFORD
800-969-0285
BOSTON
800-645-6155
PHILADELPHIA
610-647-8070
WASHINGTON, D.C.
877-419-2755
NEFCO Delivers
What You Need,
When You Need It,
Where You Need It
MANAGED INVENTORY
NEFCO's fleet of trucks
provides prompt delivery
from Maine to Virginia.
With four strategically
located distribution centers,
your order is no more than
a phone call away
Fasteners
Quick Index
Anchors
Fasteners
Bolts, Structural Bolts, Nuts, Washers,
Contractor Screws, Sockets, Stainless Steel,
Brass, Rivets, Metrics, Sammys, Vertigo,
Teks/Drywall, Technical Reference
Anchors
Strut
Mechanical Anchoring Systems,
Powder Actuated Systems, Gas
Actuated Systems, Adhesive (Epoxy)
Anchoring Systems
Strut
Threaded
Rod
Strut Systems, S/S Channel,
Spring Nuts, Pipe & Conduit Clamps,
Strut Fittings & Accessories, Cable Tray,
Stainless, Fiberglass, Caddy
Threaded Rod
Pipe
Hangers
Stainless Steel - B-7 - Low Carbon Threaded Rod, B-7 Studs, Coil Rod,
Anchor Bolts, Special Threaded Products
Pipe Hangers
Tools
Standard Hangers, Fabricated Supports,
Plumbing/Sprinkler Hangers, Hanger
Hardware, Rooftop Supports, Technical
Reference
Tools
Milwaukee , Greenlee®, DeWalt®,
Lenox®, Stanley®, Ridgid®
Power Tools, Accessories,
Pipe & Conduit Tools, Hand Tools, Radios
Abrasives
®
Abrasives
OnSite
Supply
SAIT-United Abrasives, Grinding Wheels,
Cut Off Wheels, Coated Abrasives,
Surface Conditioning, Wire Brushes,
Diamond Wheels, Cincinnati
Safety
Fall Restraint, Hard Hats, Ear Plugs,
Glasses, Boots, Lock Outs, First Aid Kits,
Fire Extinguishers, High Voltage Tools
Firestop
Rentals
Firestop, Access Doors, Ladders,
Cadweld, Power Distribution, Storage
Boxes, Chain, Wire Rope, Eye Bolts,
Slings, Come-a-longs, Rubbermaid
Safety
On Site Supplies
Fasteners
Anchors
ValueServices
Value Added
Added
Services
Strut
Strut Fabrication
Threaded
Rod
Design
Engineering • Installation
• Strut - Precut to Size
• Pre-Assembled Trapeze Hangers
Medical Support Grids
Pipe
Hangers
• Welding • Cutting
• Assembly • Punching •Painting
to your specifications
• Medical Equipment Supports
• Overhead X-Ray Supports
• Operating Room/Surgical Light Supports
• Medical Gas Column Supports
• TV Monitor Supports
• Radiation Shielding Supports
• CT Scan Injector Supports
Tools
Materials & Finishes
In-Stock
Abrasives
• Plain Steel • Green Painted Steel
• Hot-Dipped & Pre-Galvanized Steel
• Stainless Steel (Types 304 & 316)
• Aluminum • Fiberglass • WIZcoat™
Cable Tray Systems
OnSite
Supply
Laboratory Framing
• Casework Pipe Chase Frames
• Heavy Duty Shelving
• Gas Cylinder Racks
Safety
Rentals
• Ladder • Trough • Solid Bottom
• Wire Basket Communications
• Pendant Tray Hangers
Hartford, CT
800-969-0285
Miscellaneous Supports
• Service Catwalks •Ceiling Grids Supports
• Toilet Partitions
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
ARRA Compliant
Products
Available upon Request
Fasteners
Quick Reference
Buy American
Buy America
MADE IN THE USA
Screws
39
33
52
29
34
Screws
SAMMY SUPER SCREW
Brass Machine Screws . . 54 - 55
Brass Wood Screws . . . . . . . . 56
Contractor / Specialty Screws 2 - 9
Drywall / Framing Screws 4 - 5
Machine Screws . . . . . . 42 - 46
Power Bits / Nut Setters . . . . 10
Roofing Fasteners / Screws 51
Round Combo
Machine Screws . . . . . . 40 - 41
Sammy Screws . . . . . . . 12 - 15
Stainless Screws . . . . . . 45 - 49
Stainless Steel Machine Screws
. . . . . . . . . . . . . . . . . . 45 - 46
OEM / Maintenance Fasteners
Heli-Coil . . . . . . . . . . . . . . . .
Hex Keys / Dowel Pins . . . . . .
Hex Socket Screws . . . . . . . .
Managed Inventory System
Metric Fasteners . . . . . . 60 Rivets . . . . . . . . . . . . . . . . . .
Rivet Tools . . . . . . . . . . . . . .
56
58
59
57
61
63
62
Specialty Fasteners
Thread Inserts . . . . . . . . . . . . 56
Structural Fasteners
A-325, A-490
Structural Bolts . . . . . . 20 Structural Washers . . . . . 21,
Stud Welding . . . . . . . . . . . . .
Tension Control (TC) Bolts . . .
21
39
19
18
Tools
23
23
25
27
31
32
Abrasives
39
Stainless Steel Sheet Metal Screws
. . . . . . . . . . . . . . . . . . . . . . 49
Security/Tamper Proof Screws 50
Self Drilling / Drywall Screws 5
Sheet Metal Screws . . . . 47 - 49
Teks® / Acoustical Fasteners . . 7
Teks® / Self Drilling . . . . 2 - 5, 7
Vertigo® . . . . . . . . . . . . . . . . 16
Wall-Dog™ . . . . . . . . . . . . . . . 15
Wood Working Screws . . . . 8 - 9
OnSite
Supply
24
36
26
53
55
30
Technical Information
Bolting Basics . . . . . . . . . . . . 17
Fastener Identification Guide 35
Fastener ID Guide/Screw Points
. . . . . . . . . . . . . . . . . . . . . . 11
Flat Washer Dimensions . . . . . 37
Safety
B7 Bolts / B7 Studs . . . . . . . .
Belleville Washers . . . . . . . . .
Bolts . . . . . . . . . . . . . . . 18 Brass Hex Cap Screws / Nuts
Brass Nuts / Washers
53 Finished Hex Nuts . . . . . . . . .
Flat Washers - USS/SAE
. . . . . . . . . . . . . . . 36 - 37,
Flat Washers - USS/SAE Heavy Gaskets . . . . . . . . 21,
Hex Bolts . . . . . . . . . . . 22 Hex Bolts B8 / B8M . . . . . . .
Hex Cap Screws Gr. 5 & 8 . . .
Hex Nuts . . . . . . . . . . . . . . . .
Jam / Lock Nuts . . . . . . . . . .
Lock Washers /
Fender Washers . . . . . . 36 Nuts / Rod Coupling . . . . . . . .
Plow Bolts / Waterworks Bolts
Stainless Steel
Hex Cap Screws . . . . . . 28 Stainless Steel Nuts . . . . . . .
rentals
Bolts, Nuts, Washers
Pipe
Hangers
Fasteners
Threaded
Rod
Strut
Look for this symbol
in our catalog to
indicate products
that are available
domestically produced and are
ARRA Compliant!
Fasteners
Teks® / Self Drilling
Hex Washer Head Self-Drilling
Screws
Best Selling Items...
HVAC / Sheet Metal
Anchors
Hex
Washer
TEKS®
#3 Point
10 x 3/4
Strut
Hex Washer "Zip" Screws
8 x 3/4
Threaded
Rod
Size
Part No.
Qty.
10 x 3/4 10N75THWZ 7M
8 x 3/4 8N75HWZ
10M
High Hex
Washer
TEKS®
#3 Point
Hex
Washer
TEKS®
#2 Point
Size
10 x 3/4
8 x 5/8
8 x 3/4
Attaches backup plates, fixtures,
door frames, and lathers channel to
structural studs and metal decks up
to 12 gauge.
10 x 3/4
Self-Drilling Screw Specifications
8 x 5/8
8 x 3/4
Part No.
Qty.
HH1034
6.5M
8N62THWZ 10M
8N75THWZ 10M
Pipe
Hangers
Pan Framing TEKS®
7 x 7/16
8 x 5/8
8 x 3/4
8 x 1
Tools
Pan Framing Sharp
Point
7 x 7/16
8 x 1/2
Size
Part No.
Abrasives
8 x 1/2 8N50TPKZ
8 x 1/2 8N50DPKZ
Qty.
Size
10M
10M
7 x 7/16 7N43TPF
7 x 7/16 7N43PFS
Part No.
Qty.
15M
15M
Accessories
Insert Bit Holders
OnSite
Supply
1/4 x 3"
1/4" Hex Drive
1/4 x 2-9/16"
Nut Setter 5/16 x 2-9/16"
Long
3/8 x 2-9/16"
#2 x 1"
Size
O.L.
Safety
1/4 x 3"
2 x 1"
Rentals
2
1/4" Hex Drive
1/4 x 1-5/8"
Nut Setter 5/16
x 1-5/8"
Short
3/8 x 1-3/4"
Phillips Insert Bit
Part No.
Size
25D300MBH
2N100PIB
1/4 x 1-5/8"
5/16 x 1-5/8"
3/8 x 1-3/4"
1/4 x 2-9/16"
5/16 x 2-9/16"
3/8 x 2-9/16"
Hartford, CT
800-969-0285
Min.
Tension
1150
1575
2100
2350
2800
3250
3850
4275
O.L.
Part No.
25D162MNS
31D162MNS
37D175MNS
25D256MNS
31D256MNS
37D256MNS
Boston , MA
800-645-6155
Min.
Torsional
25
42
61
65
92
100
150
168
Part No.
6 x 1/2
6 x 3/4
8 x 1/2
8 x 1/2
Wafer K-Lath Modified
Truss - Sharp Point
Screw
Dia.
6
8
10
10
12
12
14
14
Size
Electrical
Wafer K-Lath Modified
Truss TEKS®
• Ask about custom
painting capabilities
• Tested in 16 gauge
metal.
8 x 1-1/4
8 x 1-1/2
8 x 2
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/2
5/8
3/4
1
1-1/4
1-1/2
2
3
3/4
1
1-1/4
1-1/2
2
2-1/2
3
14
14
14
14
14
14
14
14
14
x
x
x
x
x
x
x
x
x
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
1/4 Hex
6N50THWZ
6N75THWZ
8N50THWZ
1/4 Hex
8N62THWZ
8N75THWZ
8N100THWZ
1/4 Hex
8N125THWZ
8N150THWZ
8N200THWZ
5/16 Hex
10N50THWZ
10N62THWZ
10N75THWZ
10N100THWZ
10N125THWZ
10N150THWZ
10N200THWZ
10N300THWZ
12N75THWZ
12N100THWZ
12N125THWZ
12N150THWZ
12N200THWZ
12N250THWZ
12N300THWZ
3/8 Hex
14N75THWZ
14N100THWZ
14N125THWZ
14N150THWZ
14N200THWZ
14N250THWZ
14N300THWZ
14N400THWZ
14N500THWZ
Washington D.C.
877-419-2755
Avg.
Shear
840
1055
1496
1496
2015
2015
2585
2585
Avg.
Pullout
670
705
786
786
842
842
910
910
Qty. Pt. No.
15000 2
10000 2
10000 2
10000 2
10000 2
7500
2
5000
5000
3000
2
2
2
10000
7500
7000
5000
3500
3000
2000
1500
5000
3500
3500
2500
2000
1000
1000
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4000
3000
2000
2000
1000
1000
1000
500
500
3
3
3
3
3
3
3
3
3
Philadelphia, PA
610-647-8070
Wafer Plymetal Self
Drilling Screws with
Wings
For penetrating multiple layers
of light steel - extra high hex for added strength. With
serrations to reduce spin out
For attaching plywood to metal. Wings prevent plywood
from climbing up the fastener.
Size
Part No.
Qty.
Size
Part No.
Qty.
10 x 3/4
HH1034
6.5M
10 x 1-7/16
14 x 2-3/4
10N143TPWZ
14N275TPWZ
3000
3500
Stitch Lap Tek Hex
Washer
Self Drilling Screw
Qty.
14N87TSHZ
3500
14N87TSHZ/NEOB w/washer 3500
Hex Washer Head
with
5/16” Drive
No. 4 Drilling Point
12N87TW4Z
4M
Hex Washer Head
Size
Hex Head Self
Drilling Screws -
No. 5
Part No.
Qty.
12C125TW5Z
12C150TW5Z
12C200TW5Z
12C300TW5Z
2000
2000
2000
2000
10 x 1/2
10 x 5/8
10 x 3/4
Use to drill up to 1/2 inch in steel.
Flat Head Pilot Point
For attaching up to 1-1/8”
plywood to 18-12 gauge
metal.
• Combo drive, 1,000 hour exterior all weather coating.
Part No.
Qty.
10 x 2-1/2
PP212
2M
Bugle Head Pilot
Point
For attaching up to 3/4”
plywood to 20-14 gauge metal. Combo drive. 1,000 hour
exterior all weather coating.
Size
Part No.
Qty.
8 x 2
PP2
4M
Washington D.C.
877-419-2755
x
x
x
x
x
x
Part No.
8
8
8
8
8
8
Size
Pipe
Hangers
Available with preassembled stainless
neoprene bonded sealing washer for exterior metal
to metal applications that require a large degree of
corrosion resistance.
1/2
5/8
3/4
1
1-1/4
1-1/2
10
10
10
10
12
12
12
12
12
12
12
x 1
x 1-1/4
x 1-1/2
x 2
x 3/4
X 1
x 1-1/4
x 1-1/2
X 2
x 2-1/2
x 3
14
14
14
14
14
14
x
x
x
x
x
x
Boston , MA
800-645-6155
3/4
1
1-1/2
2
2-1/2
3
Qty.
1/4 Hex
8N50THW4
8N62THW4
8N75THW4
8N100THW4
8N125THW4
8N150THW4
5/16 Hex
10N50THW4
10N62THW4
10N75THW4
5/16 Hex
10N100THW4
10N125THW4
10N150THW4
10N200THW4
12N75THW4
12N100THW4
12N125THW4
12N150THW4
12N200THW4
12N250THW4
12N300THW4
3/8 Hex
14N75THW4
14N100THW4
14N150THW4
14N200THW4
14N250THW4
14N300THW4
Hartford, CT
800-969-0285
10000
10000
10000
7500
6000
5000
Tools
12 x 7/8
Philadelphia, PA
610-647-8070
Qty.
2000
1000
1000
Abrasives
Qty.
1-1/4
1-1/2
2
3
Part No.
12N200TRWZ
12N250TRWZ
14N275TRWZ
10000
8000
7000
5000
4000
3000
2000
5000
3500
3000
2500
2000
1500
1000
OnSite
Supply
Part No.
x
x
x
x
Size
12 x 2
12 x 2-1/2
14 x 2-3/4
Safety
Size
12
12
12
12
applications.
410 Stainless Steel
Self Drilling Screws
Heavy gauge metal fastening, sheet metal panels or clips
to steel up to 3/8” thick.
• 1,000 hour exterior all weather coating
Size
3500
2500
2000
1500
1000
1000
3
Rentals
14 x 7/8
14 x 7/8
Part No.
Threaded
Rod
For attaching wood to
heavy gauge metal.
• Up to 3/8”, great for
flooring and trailer bed
Strut
Phillips Flat Self Driller with Wings
Specifically designed to help
pull together sheet metal along seams and joints.
Size
Anchors
High-Hex Washer Head
with No. 3 Drilling Point
Fasteners
Teks® / Self Drilling
Fasteners
Drywall / Framing Screws
Wafer Plymetal
Self Drilling Screws
Wafer K-Lath
Modified Truss
Self Drilling Screws
Anchors
For attaching plywood to metal
with .220 maximum thickness.
Size
Part No.
Qty.
10
10
10
10
10
10N75TWPZ
10N100TWPZ
10N125TWPZ
10N143TWPZ
10N150TWPZ
800
5000
4000
3500
4000
x
x
x
x
x
3/4
1
1-1/4
1-7/16
1-1/2
For mounting metal lath to
heavy gauge (14-20) metal studs.
Strut
Floorboard Torx® Screws
Size
Part No.
Qty.
8
8
8
8
8N50TPKZ
8N100TPKZ
8N125TPKZ
8N162TPKZ
10000
8000
6000
4000
x
x
x
x
1/2
1
1-1/4
1-5/8
Low Profile Truss
Self Drilling Screws
The unique thread-forming screw
designed specifically for the truck
trailer industry.
Pilot
Qty.
Driver
25C125FTS
25C200FTS
25C225FTS
25C250FTS
25C350FTS
31C250FTS
7/32
7/32
7/32
7/32
7/32
5/16
3000
1800
1400
1200
800
800
T-30
T-30
T-30
T-30
T-30
T-40
Low profile 20-16 gauge
framer. No. 10 diameter for added shear strength. With
serrations to reduce spin out.
1/4 x 1-1/4
1/4 x 2
1/4 x 2-1/4
1/4 x 2-1/2
1/4 x 3-1/2
5/16 x 2-1/2
Pipe
Hangers
Part No.
Threaded
Rod
Size
Pan Framing
Self Drilling Screws
Pancake Framer
Self Drilling Screws
For attaching steel track to 14-20
gauge metal studs. Sometimes called peanuts or blackies.
For attaching 20-14 gauge
steel track to 20-16 gauge
steel studs.
• No. 2 Reduced Phillips Recess
Size
Part No.
Qty.
10 x 1/2
10 x 3/4
FT1012
FT1034
8.5 M
7.5 M
Tools
Size
Part No.
Qty.
6 x 7/16
7 x 7/16
8 x 1/2
6N43TPF
7N43TPF
8N50TPF
15000
15000
10000
Size
Part No.
Qty.
10 x 5/8
PPH1058
7.5 M
• No. 2 Reduced Phillips Recess
Pan Framing Sharp Point
Abrasives
Size
Part No.
Qty.
"Zip" Screws
Self Piercing
(Slotted) Hex
Washer Head Needle Point Screws
6 x 7/16
7 x 7/16
6N43PFS
7N43PFS
15000
15000
Used in light metal assembly such as electrical outlets,
framing, and various other sheet metal applications.
For attaching steel studs to steel
track up to 20 gauge. Sometimes
called peanuts or blackies.
• Slotted head - Zinc plated
OnSite
Supply
Wafer K-Lath
Modified Truss
Sharp Point
For metal lath or K-lath to metal studs 20 to 25 gauge.
• Zinc plated - Phillips Recess
• Also available in Plain Finish
Size
Safety
Rentals
8
8
8
8
8
8
8
4
x
x
x
x
x
x
x
1/2
9/16
3/4
1
1-1/4
1-5/8
2
Part No.
Qty.
8N50DPKZ
8N56DPKZ
8N75DPKZ
8N100DPKZ
8N125DPKZ
8N162DPKZ
8N200DPKZ
10000
10000
8000
5000
500
4000
2000
Hartford, CT
800-969-0285
Size
Part No.
1/4 Hex
Qty.
8
8
8
8
8
8
8N50HWZ
8N75HWZ
8N100HWZ
8N125HWZ
8N150HWZ
8N200HWZ
15000
10000
7500
6000
5000
3000
x
x
x
x
x
x
1/2
3/4
1
1-1/4
1-1/2
2
10
10
10
10
10
1/4 or 5/16 Hex, Please Specify
x
x
x
x
x
1/2
3/4
1
1-1/2
2
Boston , MA
800-645-6155
10N50HWZ
10N75HWZ
10N100HWZ
10N150HWZ
10N200HWZ
Washington D.C.
877-419-2755
14000
7500
5000
3000
2000
Philadelphia, PA
610-647-8070
For attaching steel
strapping (bridging) of
furring channel to steel joist.
Original and primary
application of drywall to
wood studs - also used in
many interior wood and fixture fastening applications.
10
10
10
10
10
10
x
x
x
x
x
x
15000
15000
10000
10000
10000
10000
10000
7500
5000
5000
2
2
2
2
2
2
2
2
2
2
.104
.104
.104
.104
.104
.104
.104
.104
.104
.104
2
3
3
3
3
3
.110
.179
.179
.179
.179
.179
#10 Dia.
1/2 10N50TPPZ
5/8 10N62TPPZ
3/4 10N75TPPZ
12 10N100TPPZ
1-1/4 10N125TPPZ
1-1/2 10N150TPPZ
10000
8000
7500
5000
3500
3000
410 Stainless Steel
For exterior metal to metal
applications that require a
large degree of corrosion
resistance.
Size
8
8
8
8
x
x
x
x
1/2
3/4
1
1-1/2
10
10
10
10
8N50TPP4
8N75TPP4
8N100TPP4
8N150TPP4
x
x
x
x
Part No.
1/4 Dia.
1/2
3/4
1
1-1/4
Qty.
10000
10000
7500
5000
10000
7000
5000
4000
For attaching wood trim
and base to metal studs.
6 x 1
6 x 1-5/8
6 x 2-1/4
8 x 3
Philadelphia, PA
610-647-8070
Part No.
#6 Dia.
Qty.
6N100DTS
6N162DTS
6N225DTS
10000
5000
3000
#8 Dia.
8N300DTS
Washington D.C.
877-419-2755
1
1-1/8
1-1/4
1-1/2
1-5/8
1-3/4
2
2-1/4
Qty.
6N100DRC
6N112DRC
6N125DRC
6N150DRC
6N162DRC
6N175DRC
6N200DRC
6N225DRC
10000
8000
6000
6000
5000
4000
3500
3000
#8 Dia.
8 x 2-1/2
8 x 3
8N250DRC
8N300DRC
2500
2000
Fine Thread
Twin lead point for
high holding power
and fast penetration available in black phosphate multi-purpose screw used for
fastening drywall to 20 - 25 gauge metal studs.
Size
6
6
6
6
6
6
x
x
x
x
x
x
2000
1
1-1/8
1-1/4
1-5/8
2
2-1/4
Part No.
#6 Dia.
Qty.
6N100DRF
6N112DRF
6N125DRF
6N162DRF
6N200DRF
6N225DRF
10000
10000
8000
5000
3500
3000
8 x 2-1/2
8 x 3
10
10
10
10
10
Trim Head
Sharp Point
Size
x
x
x
x
x
x
x
x
Part No.
#6 Dia.
• Phillips Recess
5/16 Dia.
10N50TPP4
10N75TPP4
10N100TPP4
10N125TPP4
6
6
6
6
6
6
6
6
#8 Dia.
8N250DRF
8N300DRF
x
x
x
x
x
3-1/2
3-1/2
4
4-1/2
5
Tools
3/8
1/2
3/4
1
1/2
5/8
3/4
1
1-1/4
1-1/2
Size
Abrasives
6N37TPPZ
6N50TPPZ
6N75TPPZ
6N100TPPZ
8N50TPPZ
8N62TPPZ
8N75TPPZ
8N100TPPZ
8N125TPPZ
8N150TPPZ
x
x
x
x
x
x
x
x
x
x
Drill Cap.
2500
2000
#10 Dia.
10N350DRF
10N375DRF
10N400DRF
10N450DRF
10N500DRF
1500
1500
1500
1500
1000
OnSite
Supply
6
6
6
6
8
8
8
8
8
8
Pt. No.
Safety
Part No.
Qty.
#6 Dia.
Laminating Screw
A temporary fastener for
joining drywall to drywall.
Size
Part No.
Qty.
10 x 1-1/2
10N150LAS
5000
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
5
Rentals
Size
Strut
Coarse Thread
Threaded
Rod
Zinc Plated
Anchors
Bugle Head Drywall Screws
Pipe
Hangers
Pan Head Phillips Self Drilling Screws
Fasteners
Self Drilling / Drywall Screws
Fasteners
Contractor / Specialty Screws
Anchors
High and Low
Thread
Bugle Head Self
Drilling Screws
For attaching drywall to light gauge steel studs and for
special applications requiring strip-out resistance.
Drill point provides easy cutting
and fast penetration used for fastening drywall to 14 - 20
gauge metal studs.
• No. 2 Reduced Phillips Recess
Size
Strut
6
6
6
6
7
7
7
8
x
x
x
x
x
x
x
x
Part No.
1
1-1/8
1-1/4
1-5/8
2
2-1/4
2-1/2
3
HL1
HL118
HL114
HL158
HL2
HL214
HL212
HL3
• Available in Zinc or Black Phosphate
Qty.
Size
8 x 2-3/8
8 x 2-5/8
8 x 3
10M
10M
8M
5M
3.5M
3M
2.5M
2M
3000
2500
2000
Threaded
Rod
(Galvanized)
For attaching wood
trim and base
over gypsum board to light gauge steel studs or wood
substrate.
Use in fence, decks, wood
siding, gazebos, or any exposed
exterior application.
Pipe
Hangers
• No. 1 or 2 Square Recess
Stainless
Size
Part No.
6 x 1-5/8
6 x 2-1/4
8 x 3
TH158
TH214
TH3
Qty.
For the best corrosion
resistance, use stainless
steel.
5M
3M
2M
Size
Tools
Wood Trim Over
Gypsum to 20 14 Gauge Metal
For attaching wood trim over gypsum to 20 - 14 gauge
metal.
Abrasives
• No. 1 or 2 Square Recess
• Available in Zinc and Black Phosphate Finish
OnSite
Supply
Size
Part No.
6
6
8
6
6
8
THD2158
THDZ214
THDZ3
THD158*
THD214*
THD3*
1-5/8
2-1/4
3
1-5/8
2-1/4
3
Qty.
Deck Screws
Dacro Coated
Trim Head
x
x
x
x
x
x
Part No.
#8 Dia.
8N237TDS
8N262TDS
8N300TDS
Qty.
5M
3M
2M
5M
3M
2M
* Black Phosphate Finish
Part No.
#6 Dia., Galvanized
6 x 1
6N100DRCH
6 x 1-1/4
6N125DRCH
6 x 1-5/8
6N162DRCH
2
6N200DRCH
6N225DRCH
6 x 2-1/4
#8 Dia., Galvanized
8 x 2-1/2
8N250DRCH
8N300DRCH
8 x 3
#10 Dia., Galvanized
10 x 3-1/2
10N350DRCH
10N400DRCH
10 x 4
Square Drive
7 x 2 (SQ)
7N200DMS/DACRO
8N250DMS/DACRO
8 x 2-1/2 (SQ)
8N300DMS/DACRO
8 x 3 (SQ)
10 x 3-1/2 (SQ) 10N350DMS/DACRO
Stainless
8 x 2-1/2 (SS)
8N250DCSS
10N300DCSS
10 x 3 (SS)
Qty.
10000
8000
5000
3500
3000
2500
1500
1000
1000
3500
2500
2000
1500
2500
1000
Trim Head Self Drilling Screws
Safety
Used for attaching wood trim
or base to 14 - 20 gauge metal
studs.
Rentals
Size
Part No.
6 x 1
6 x 1-5/8
6 x 2-1/4
6N100TTSZ
6N162TTSZ
6N225TTSZ
6
Qty.
10000
5000
3000
Hartford, CT
800-969-0285
Not listed...?
Call us...It may be in stock
or we can order it!
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Elevator Bolts
3/4
1
1/4
1-1/2
10
10
10
10
12
12
12
12
12
12
x
x
x
x
x
x
x
x
x
x
3/4
1
1/4
1-1/2
3/4
1
1-1/4
1-1/2
2
3
14
14
14
14
14
14
x
x
x
x
x
x
3/4
1
1/4
1/2
2
3
7000
5000
4000
3500
5000
4000
3500
3000
3500
3000
3000
2500
1500
1000
3000
2500
2000
2000
1500
1000
Size
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Strut
x
x
x
x
Qty.
Part No.
Qty.
1/4 - 20 Nominal Size and Threads
25C75ELB
100
25C100ELB
100
25C125ELB
100
25C150ELB
100
25C175ELB
100
25C200ELB
100
25C250ELB
100
3/8 - 16 Nominal Size and Threads
31C100ELB
50
31C125ELB
50
31C150ELB
50
31C175ELB
50
31C200ELB
50
31C250ELB
50
31C300ELB
50
37C100ELB
50
37C125ELB
50
37C150ELB
50
37C175ELB
50
37C200ELB
50
37C250ELB
50
37C300ELB
50
Threaded
Rod
8
8
8
8
Part No.
1/4 Hex
8N75TWN
8N100TWN
8N125TWN
8N150TWN
5/16 Hex
10N75TWN
10N100TWN
10N125TWN
10N150TWN
12N75TWN
12N100TWN
12N125TWN
12N150TWN
12N200TWN
12N300TWN
3/8 Hex
14N75TWN
14N100TWN
14N125TWN
14N150TWN
14N200TWN
14N300TWN
Pipe
Hangers
Size
• Extra Large Wafer Head Square Neck - Low Carbon
Steel
Tools
• Zinc Plated
Primarily used for
hanging suspended
ceiling grid into wood
joists.
Size
Part No.
1/4 x 3
1/4 x 4
1/4 x 5
EL3
EL4
EL5
Qty.
1M
1M
1M
Tie-Wire Acoustical
Toggle
Toggle bolt assemblies are
used for suspended ceilings,
light fixtures, ductwork
and other fixtures to be wire strung from a hollow ceiling.
Primarily used for
hanging suspended ceiling grid into metal studs.
Size
Part No.
Qty.
1/4 x 2
1/4 x 3
ELDZ2
ELDZ3
1M
1M
Washington D.C.
877-419-2755
Size
Part No.
Qty.
1/4-20 x 4-1/4
1/4-20 x 5
TB414
TB5
.800M
.800M
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
• Zinc Plated
• Spring loaded also available
Self Drilling Eye
Lag Screws
Philadelphia, PA
610-647-8070
Abrasives
Eye Lag Screws
OnSite
Supply
For attaching light gauge metal, metal siding, flashing,
etc. to steel structure. Pre-assembled Neoprene bonded
sealing washer keeps out moisture and prevents bleeding.
Originally used for Grain Elevators. Can be used
anywhere that flush mounting is desirable. Standard
Plain Finish. Also Available in Zinc plated and with
various “Rib Neck” and “Saber Tooth” variations.
7
Rentals
with Neoprene Bonded
Sealing Washer No. 3
Drilling Point
Fasteners
Hex Washer Head
Self Drilling Screws
Anchors
TEKS® / Acoustical Fasteners
Fasteners
Contractor / Specialty Screws
Cement Board Screws
Anchors
Spade-Point w/Nibs
Self-Drilling w/Nibs
Designed to fasten cement
board to wood or light gauge
steel studs (25-20 gauge).
Nibs under the head allow it to countersink into the board.
The spade point penetrates the board without cracking and
high-low threads ensure high withdrawal resistance.
Designed to fasten cement
board to metal studs (20-14
gauge). Nibs under the head allow it to countersink into
board.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Strut
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
8 x 2
CB114
CB158
CB214
5M
5M
3M
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
CB114
CB158
5M
5M
Threaded
Rod
Fiber Cement Board Screws
For Wood
For Steel
Designed to fasten fiber
cement board to wood.
Recommended for: Lap siding, fiber cement board to wood,
fiber cement rooting trim, flooring for tile in kitchen and bath.
Designed to fasten
fiber cement board to
steel studs (0.100” max). Wings allow cutter head to
countersink flush with fiber cement board.
Pipe
Hangers
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
• Type 17 point
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
FCBS114
FCBS158
8M
5M
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
8 x 2-1/4
FCBS114
FCBS158
FCBS214
5M
5M
2.5M
Tools
Abrasives
For Wood in High
Wind
For Steel in High
Wind
Designed to fasten fiber
cement board in areas requiring high wind shear and pullthrough resistance. Recommended for: Lap siding, fiber
cement board to steel studs, fiber cement roofing trim,
flooring for tile in kitchen and bath.
Designed to fasten fiber
cement board in areas requiring high wind shear and pullthrough resistance (.100” max. steel stud). Recommended
for: Lap siding, fiber cement board to steel studs, fiber
cement roofing trim, flooring for tile in kitchen and bath.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
• Type 17 point
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
FCBSS114
FCBSS158
8M
5M
Size
Part No.
Qty.
8 x 1-1/4
8 x 1-5/8
FCBD114
FCBD158
5M
5M
8 x 2-1/4
FCBD214
3M
OnSite
Supply
Wood Working Screws
Safety
Cabinet Screws
Hardwood Screws
Use for attaching cabinets
to wood or light gauge (25 - 20 gauge) steel studs. Combo
drive allows fasteners to remain on bit while cabinet is held
in place for attachment.
Also called “Face Frame
Screws” - used in hardwood cabinet and furniture making.
• Yellow Zinc Finish
• Type 17 point
Rentals
Size
Part No.
Qty.
8 x 2-3/8
8 x 3
CBS238
CBS300
2.5M
2M
8
Hartford, CT
800-969-0285
• Type 17 point
• Pan head Combo Drive
• Black phosphate
Size
Part No.
Qty.
6 x 1-1/4
6 x 1-1/2
PHC6114
PHC6112
6M
6M
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Wood Working Screws
Size
Part No.
Qty.
8
8
8
8
8
8
PBPO8114
PBPO8112
PBPO8158
PBPO8200
PBPO8212
PBPO8300
6M
5M
5M
3M
2.5M
2M
x
x
x
x
x
x
1-1/4
1-1/2
1-5/8
2
2-1/2
3
Size
Part No.
Qty.
6 x 1-1/4
6 x 1-1/2
6 x 1-5/8
7 x 2
7 x 2-1/4
8 x 2-1/2
8 x 3
10 x 3-1/2
10 x 3-3/4
10 x 4
GS114
GS112
GS158
GS200
GS214
GS212
GS300
GS312
GS334
GS400
8M
6M
5M
3.5M
3M
2.5M
2M
1M
1M
1M
Strut
• Combo Drive with nibs
• Zinc plated
• Bugle head No. 2 Reduced Phillips Recess
• Yellow zinc
Threaded
Rod
• Type 17 point
Use for attaching wood
to wood. Recommended for cabinet and general woodworking where the gold/yellow head meets user’s cosmetic
requirements, an interior fastener not recommended for
outdoor decking.
Pipe
Hangers
An all around wood to wood product screw for building
cabinets, furniture, etc., where smooth counter-sinking via
the nibbled head and the anti-splitting action of the Type
17 point are needed. Can also be used to attach wood to
wood products to light gauge steel (25-20 gauge).
Anchors
Coarse Screws
Finding the Right Phillips Bit
• Match the size and type of screw with the proper bit size
Round Head
Wood
Screws
0, 1
Flat Oval
Binding
Wood Screws
0, 1
Round Head
Fillister
Screws
0, 1
Truss Brazier
Button Head
Machine Screws
0, 1
Flat, Oval, Round,
Stove and Binding
Sheet Metal
0, 1
1
2, 3, 4
2, 3, 4
2, 3, 4
2, 3, 4,5
2, 3, 4
2, 3, 4
2
5, 6, 7, 8, 9
5, 6, 7, 8, 9, 10 5, 6, 8, 10
5, 6, 8, 10
6, 8, 10
5, 6, 7, 8, 10
3
10, 12, 14, 16
12, 14, 16
12, 1/4
12, 1/4, 5/16
12, 1/4
12, 14
4
18, 20, 24
18, 20, 24
5/16, 3/8, 7/16, 1/2 3/8, 7/16, 1/2
Abrasives
Use
Flat or Oval
This
Head
Bit Size Wood Screws
0
0, 1
Tools
Particle Board
Screws
Fasteners
Woodworking Screws
5/16, 3/8, 7/16, 1/2
OnSite
Supply
Tool Repair
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
9
Rentals
Safety
NEFCO offers tool repair on many makes and brands
and tool rental on name-brand items from Greenlee,
Ridgid, and Milwaukee.
Fasteners
Power Bits / Nut setters
Anchors
Insert Bit Holders
Torx® Bit
• For 1/4" Hex Insert Bits
• Shank Size Standard 1/4" Hex Drive
Size
Strut
1/4
1/4
1/4
1/4
X
X
X
X
Part No.
3
4
6
6
25D300MBH
25D400MBH
25D600MBH
25D800MBH
Point Size
Overall Length
Part No.
7
8
9
10
15
20
25
27
30
40
1
1
1
1
1
1
1
1
1
1
7N100TOB
8N100TOB
9N100TOB
10N100TOB
15N100TOB
20N100TOB
25N100TOB
27N100TOB
30N100TOB
40N100TOB
Phillips Power Bit
Threaded
Rod
1/4" Hex Drive Nut Setters
• 1/4" Hex Shank Insert Bits
Pipe
Hangers
Point Size
Overall Length
Part No.
1
1
1
2
2
2
2
3
3
3
1-15/16
2-3/4
3-1/2
1-15/16
2-3/4
3-1/2
6
1-15/16
2-3/4
3-1/2
1N193PPB
1N275PPB
1N350PPB
2N193PPB
2N275PPB
2N350PPB
2N600PPB
3N193PPB
3N275PPB
3N350PPB
Tools
1/4 Hex Insert Bits
*Limited Clearance Bits
Magnetic for Driving Hex Head
Self-Drilling Fasteners
Short
• Magnetic
Hex Size
Overall Length
Part No.
3/16
1/4
5/16
3/8
7/16
1-5/8
1-5/8
1-5/8
1-3/4
1-3/4
18D162MNS
25D162MNS
31D162MNS
37D175MNS
43D175MNS
Hex Size
Overall Length
Part No.
3/16
1/4
1/4
5/16
5/16
5/16
3/8
7/16
2-9/16
2-9/16
6
2-9/16
3-3/16
6
2-9/16
2-9/16
18D256MNS
25D256MNS
25D600MNS
31D256MNS
31D318MNS
31D600MNS
37D256MNS
43D256MNS
Phillips Insert Bit
Abrasives
OnSite
Supply
Point Size
Overall Length
Part No.
0
1
1
2
2
2
2
3
1
1
1
1
1
1-1/2
2
1
0N100PIB
1N100PIB
1N100PIB/LC*
2N100PIB
2N100PIB/LC*
2N150PIB
2N200PIB
3N100PIB
Square Insert Bit
Safety
Rentals
Point Size
Overall Length
Part No.
0
1
1
2
2
3
3
1
1
1-15/16
1
1-15/16
1-15/16
3
0NSQI
1N100SQI
1N193SPB
2N100SQI
2N193SPB
3N193SPB
3N100SQI
10
Hartford, CT
800-969-0285
Long
• Magnetic
Not listed...?
Call us...It may be in stock
or we can order it!
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Use this guide to help you identify the right fastener for your application.
Anchors
Self-Tapping Screws - Steel - Zinc Plated
Fasteners
FASTENER ID / SCREW GUIDE
Truss Phillips Type A-AB
Flat Phillips Type B
Pan Square Type A
Flat Slotted Type A
Pan Phillips Type B
Pan Combo Drive
Type A-AB
Pan Slotted Type A-AB
Pan Slotted Type B
Flat Phillips Type A-AB
Hex Unslotted Type A
Hex Washer Slotted
Type B
Oval Phillips Type A-AB
Hex Washer Slotted
Type A-AB
Pan Phillips Type H-L
Pan Phillips Type A-AB
Hex Washer Unslotted
Type A-AB
Hex Washer Unslotted
Type H-L
Threaded
Rod
Strut
Flat Square Type A
Hex Washer Slotted
Self-Piercing
Thread Cutting Screws - Zinc Plated
Pan Head Phillips Type 1
Pan Phillips Type F
Hex Washer Slotted Type 1
Pan Slotted Type F
Pan Slotted Type 23
Pan Phillips Type 25
Hex Washer Slotted
Pipe
Hangers
Flat Phillips Type F
Type F
Hex Washer Unslotted
Type F
Pan Phillips Type 23
Hex Washer Slotted
Type 25
Hex Washer Slotted
Type 23
Tools
Flat Torx Type F
Pan Slotted Type 25
A
A thread forming screw for use in thin metals 0.015 - 0.050 thick. Used with drilled,
punched or nested holes in sheet metal, resin impregnated plywood, asbestos
combinations, among others. Not recommended for new design.
AB
A thread forming screw for use with heavier metal 0.050-0.200 thick. The finer thread
pitch used with light and heavy sheet metal, non-ferrous castings, plastics, plywood,
asbestos combinations.
U
A thread forming screw with high Helix thread for driving or hammering into sheet metal,
castings, fiber or plastics for permanent, quick assemblies.
F
A thread cutting screw with machine screw thread having multi-cutting edges and chip
cavities. For use in heavy gauge, sheet metal, aluminum, zinc and lead die casting, cast
iron, brass and plastic.
BT 25
A thread cutting screw implementing a coarse Type B thread. Used with plastics and other
soft materials with large chip clearing and cutting edges.
T 23
A thread cutting screw with a fine thread offering maximum thread cutting area and
excellent chip clearing with minimum tightening torque.
Tri-lobular
This thread rolling screw uses a tri-lobular design to cause the grains of the mating
material to reform to the thread contour rather than be sheared during tapping.
see page 2-5 for Self Drilling Screws
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
11
OnSite
Supply
Description
Safety
Type
Rentals
General Thread
Appearance
Abrasives
Type Of Screw Points - Head Styles
Fasteners
SAMMY® Screws
Speedy Products Specialty Screws
Features and Benefits
Anchors
SAMMY'S
Threaded Rod Hangers
General Application & Uses
Strut
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
• One system for all rod hanging ap-
• Sidewinders are the side mount versions of the Sammys.
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are selfdrilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjustable torque, battery-powered screw
gun or hammer drill.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base
Steel Purlins & Beams,
Materials: Wood, Concrete
Vertical Applications
Threaded
Rod
SAMMY'S
SAMMY'S
Model DST, DSTR & TEK Steel Vertical Hangers
Model GST Wood Vertical Hangers
Pipe
Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
Tools
Abrasives
GST .750
GST 100
GST 200
GST 300
GST 600
GST .75
GST 10
GST 20
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
GST 25-380 3/8"
GST 30
3/8"
GST 40
3/8"
GST 60
3/8"
GST 2
1/2"
GST 2.5-380 1/2"
GST 3
1/2"
GST 4
1/2"
GST 6
1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/4"
#14
1"
#14
2"
#14
3"
#14
6"
#14
3/4"
#14
1"
#14
2"
#14
2-1/2" #14
3"
#14
4"
#14
6"
#14
2"
#14SW
2-1/2" #14SW
3"
#14SW
4"
#14SW
6"
#14SW
—
—
—
—
—
—
—
UL, FM, NFPA
UL, NFPA
UL, FM, NFPA
NFPA
NFPA
—
—
—
—
—
OnSite
Supply
SAMMY'S
Model CST Concrete Vertical Hangers
Safety
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank
Nut
Model No. Dia. Size & Length Driver Approvals
CST 200
CST 20
CST 2
Rentals
12
1/4"
3/8"
1/2"
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14SW
Hartford, CT
800-969-0285
—
FM
—
DST - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Packaged 25 per box.
Model No.
Rod
Dia.
DSTR 100 1/4"
DST 100
1/4"
1/4"
DST 150
1/4"
DST 200
DST 250
1/4"
DST 300
1/4"
TEK 500
1/4"
DSTR 1-1/2" 3/8"
DSTR 1"
3/8"
DSTR 516 3/8"
3/8"
DST 10
3/8"
DST 15
DST 20
3/8"
3/8"
DST 25
DST 30
3/8"
DST 516
3/8"
TEK 50
3/8"
DST 2.0
1/2"
DST 2.5
1/2"
DSTR 1.0 1/2"
DSTR 5.16 1/2"
DST 5.16 1/2"
TEK 5.0
1/2"
Screw Shank Nut
Size & Length Driver Approvals
#14
1/4-20 x 1"
—
1/4-14 x 1"
#14
—
1/4-14 x 1-1/2" #14
—
1/4-14 x 2"
#14
—
1/4-12 x 2-1/2" #14
—
1/4-14 x 3"
#14
—
12-24 x 1-1/2" #14
—
12-24 x 1-1/2" #14 UL, FM, NFPA
#14 UL, FM, NFPA
1/4-20 x 1"
5/16"-18 x 1-1/4" #14 UL, NFPA
#14 NFPA
1/4-14 x 1"
1/4-12 x 1-1/2" #14 NFPA
1/4-14 x 2"
#14 NFPA
1/4-14 x 2-1/2" #14 NFPA
1/4-14 x 3"
#14 NFPA
5/16"-18 x 1-1/4" #14 UL, NFPA
12-24 x 1-1/2"
#14 FM, NFPA
1/4-14 x 2"
#14SW
—
1/4-14 x 2-1/2" #14SW
—
1/4-20 x 1"
#14SW
—
5/16"-18 x 1-1/4" #14SW
—
5/16"-18 x 1-1/4" #14SW
—
12-24 x 1-1/2" #14SW
—
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty status.
Please see page 97 for complete ordering
information
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
x
x
x
x
x
x
1"
2"
1"
2"
2-1/2"
3"
#14SW
#14SW
#14SW
#14SW
#14SW
#14SW
—
—
—
NFPA
NFPA
—
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Model No.
Rod Screw Shank
Dia. Size & Length
Approvals
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
NFPA
NFPA
NFPA
NFPA
UL, NFPA
UL, NFPA
UL, NFPA
NFPA
SWD 10
SWD 15
SWD 20
SWD 516
SWDR 1-1/2"
SWDR 1"
SWDR 516
SWT 15
1/4-14 x 1"
1/4-14 x 1-1/2"
1/4-14 x 2
5/16-18 x 1-1/4"
1/4-20 x 1"
1/4-20 x 1-1/2"
5/16-18 x 1-1/4"
12-24 X 1-1/2"
17°
Deflection
From
Vertical
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Model No.
SH-GST 20
SH-GST 22SS
SH
-GST 30
SH-GST 30SS
8113910
Rod
Dia.
Material
Screw Shank
Size & Length
1/4"
1/4"
1/4"
1/4"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
#14 (Black) Nut Driver
x
x
x
x
2"
2"
3"
3"
17°
Deflection
From
Vertical
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Model No.
Rod
Dia.
Material
Screw Shank
Size & Length
1/4" x 1"
1/4" x 1"
Zinc Plated Steel 3/8"
SH-DSTR 1
3/8"
SH-DSTR 1-SS Stainless Steel
8113910 #14 (Black) Nut Driver
For Wood and Concrete
89°
Deflection
From
Vertical
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Model No.
Rod
Dia.
Screw Shank Nut
Size & Length Driver Approvals
8017925
SWC 200
SWC 20
1/2"
1/4"
3/8"
1/4" x 6"
#14SW
5/16" x 1-1/2" #14SW
5/16" x 1-1/2" #14SW
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
—
—
NFPA
Threaded
Rod
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
Pipe
Hangers
1/4"
1/4"
3/8"
3/8"
SWG 25-380 3/8"
SWG 30
3/8"
SWG 100
SWG 200
SWG 10
SWG 20
Screw Shank Nut
Size & Length Driver Approvals
Tools
Rod
Dia.
Abrasives
Model No.
Model No.
SH-GST/CST 20
SH-GST/CST 2.0
8273910
3/8"
1/4" x 1-3/4"
1/2"
1/4" x 1-3/4"
#14SH Orange Nut Driver
Rod
Dia.
Screw Shank
Size & Length
OnSite
Supply
Self-threading into wood. No pre-drilling required. 25/box
Safety
Model SWG Wood SIDEWINDERS™ Hangers
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
Please see page 97 for complete ordering
information on all SAMMY's Products
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
13
Rentals
SAMMY'S
Anchors
Swivel Head™
SAMMY'S Hangers
Strut
Sammys™ Sidewinders™
Threaded Rod Anchors
Fasteners
SAMMY® SCREWS
Fasteners
SAMMY® Screws
Anchors
SAMMY XPress™ Sidewinder Hangers
SAMMY Xpress
installation sequence
Strut
Threaded
Rod
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal attachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY Xpress
Universal Tool
SAMMY XPress™ Hangers
Pipe
Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Tools
Model
No.
Rod Screw Shank
Gauge Dia. Size & Length
XP 20
XP 35
UXPIT
XPDB
22-20 3/8" 1/4-20 x 1-1/8"
UL, NFPA
18-16 3/8" 1/4-20 x 1-1/8"
UL, NFPA
Sammy X-Press Universal Installation Tool
25/34" Drill Bit
Model
No.
Rod
Gauge Dia.
SWXP
UXPIT
16-12 3/8" 1/4-20 x 1-1/8"
UL
Sammy X-Press Universal Installation Tool
Screw Shank
Size & Length
Approvals
Approvals
Swivels up to 89°
Abrasives
SH-TEK 50
™
SAMMY'S Swivel Head
Hangers
Metal Deck, Min 22 ga.
Tested to Zone 4 Seismic Requirements
OnSite
Supply
Safety
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material engagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod
Screw Shank
Part No.
Dia.
Size & Length
Rentals
8268957
8270957
8273910
14
3/8"
12-24 x 1-5/8"
1/2"
12-24 x 1-5/8"
#14SH Orange Nut Driver
Hartford, CT
800-969-0285
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Approvals
UL
UL
Part
No.
8294922
8295922
8272957
8271957
UXPIT
Boston , MA
800-645-6155
Rod
Dia.
Pipe
Size
Gauge
Test
Load
3/8"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
1/2"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
Sammy X-Press Universal Installation Tool
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Screw and Anchor in One!
#14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with Sidewinders and 1/2" rod SAMMY'S. (See individual
SAMMY'S Listing for correct Nut Driver).
8194910
8195910
8152910
UXPIT Universal
X-Press It Tool
Retro Socket for
8151910 (Old Tool)
25/64" Drill Bit
Std. Box
1-1/4" Combo HWH Chrome
100
Robertson Head Wall-Dog™ Light Duty Anchor
Part No.
2266
Description
Std. Box
1-1/4" Chrome Robertson Head
100
Phillips Oval Head Wall-Dog™ Light Duty Anchor
Part No.
Description
Std. Box
1-1/4" Zinc Oval Head
1-1/4" White Oval Head
1-1/4" Black Oval Head
1-1/4" Brass Oval Head
2314
2328
2388
2292
100
100
100
100
Phillips Pan Head Wall-Dog™ Light Duty Anchor
Part No.
Speedy Pole Tool™ & Socket
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Model No.
130
131
132
133
138
3004
Speedy Pole Tool 6' (3' - 6')
Speedy Pole Tool 12' (4' - 12')
Speedy Pole Tool 18' (6' - 18')
Speedy Pole Tool 24' (8' - 24')
SAMMYS™ Socket Driver
Ceiling Wire Socket Driver
Universal Installation Kit
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
2316
2330
2286
2294
2273
2274
2275
2276
1-1/4" Zinc Pan Head
1-1/4" White Pan Head
1-1/4" Black Pan Head
1-1/4" Brass Pan Head
1-1/2" White Pan Head
1-1/2" Bronze Pan Head
1-1/2" Zinc Pan Head
1-1/2" Black Phosphate Pan Head
Part No.
2277
2278
2279
2280
100
100
100
100
100
100
100
100
Description
1/4"
1/4"
1/4"
1/4"
x
x
x
x
Std. Box
1-1/2" White Wafer Head
2" White Wafer Head
2-1/4" White Wafer Head
2-1/2" White Wafer Head
100
100
100
100
Wall-Dog™ Kits (includes 50 Chrome Pan Head Anchors)
Part No.
2316
2330
Description
Wall-Dog Kit with (1) Phillips Screwdriver
Wall-Dog Kit with 3/16" straight shank bit
See page 107 in our Anchor Section
SPE139 Universal Installation Kit
Washington D.C.
877-419-2755
Std. Box
Phillips Wafer Head Wall-Dog™ Light Duty Anchor
Model No.
Philadelphia, PA
610-647-8070
Description
Pipe
Hangers
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
2265
Description
Tools
SAMMY'S X-Press It®
Universal Installation Tool
Part No.
#14SW
Abrasives
#14SW (Red) Nut Driver
OnSite
Supply
8114910
Part No.
Combo Hex Washer Head Wall-Dog™ Light Duty Anchor
Safety
8113910
Part No.
NEW
• Wall-Dog® is installed right through fixture
HEAD
into wallboard.
STYLES
• Wall-Dog® installs quickly and easily with a
Phillips®
screwdriver in wallboard, plywood,
concrete, hollow or grout filled block, brick and plaster.
• Patented thread design allows a Wall-Dog® to enter a
3/16” hole producing a one step anchor with superior
holding values.
#14
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
15
Rentals
Part No.
Wall-Dog
Strut
SAMMY'S Nut Drivers
• #14 (Black) Nut Driver, for use with SAMMYS™
& Swivel Head™ SAMMYS™. (See individual
SAMMY'S Listing for correct Nut Driver).
Anchors
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes into
contact with the material you are installing into, continue drilling until nut driver spins free. Installation is
then complete.
Threaded
Rod
Sammy's Installation Tools
Fasteners
Sammy's installation tools / wall dog
Fasteners
Vertigo®
Vertigo™ Rod Hanging Systems
Vertigo™ Installation Accessories
One System for all Rod Hanging Applications
Anchors
One-piece, all-steel threaded fastening system for suspending
steel threaded rod vertically overhead in pipe-hanging, fire
protection, electrical conduit and cable tray applications.
Strut
Anchor Materials:
Zinc Plated Carbon Steel
Size Range:
¼" to ½" Threaded Rod
Suitable Base Materials:
Steel Purlins & Beams, Wood & Timber, Concrete, Hollow
Plank Concrete
Steel Vertical Hanger
Steel Side Hanger
Wood Side Hanger
Steel Vertical Hanger (#3 for Purlins, #5 for Beams)
Threaded
Rod
Pipe
Hangers
Part
No.
7155
7157
7158
7159
7160
7152
7154
7161
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
3/8"
1/4"
3/8"
1/2"
6' - 12' Pole Tool
Drive Sockets & Pole Tool
Concrete Vertical Hanger
Concrete Socket
1/4", 3/8" or 1/2"
Universal Steel
& Wood Socket
Wood Vertical Hanger
Screw Shank
Point
Self-Drilling
Std
Size & Length
Style
Range
Box
1/4"-20 x 1"
#3
100
1/4"-20 x 2"
#3 0.036" (20 ga.) 100
1/4"-20 x 1" (w/nut) #3
to
100
1/4"-20 x 1-1/2"
#3
0.188" (3/16") 100
1/4"-20 x 1-1/2" (w/nut) #3
100
12-24 x 1-1/2"
#5
0.188" (3/16") 100
12-24 x 1-1/2" (w/nut) #5
to
100
12-24 x 1-1/2" (w/nut) #5
0.5" (1/2")
100
• 500 - 1500 RPM
• Universal socket color-coded Red,
concrete socket color-coded Blue.
• Pole Tool extends reach 6' to 12'.
Includes three Jaw Chuck
Part
No.
7187
7195
7197
7198
7166
Std
Box
Universal Steel &
Wood Socket
1/4" Concrete Socket
3/8" Concrete Socket
1/2" Concrete Socket
Pole Tool
5
5
5
5
1
Steel Side Hanger (#3 for Purlins, #5 for Beams)
Tools
Part
No.
7183
7184
7186
7188
7200
7201
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
1/4"
3/8"
Screw Shank
Point
Self-Drilling
Std
Size & Length
Style
Range
Box
1/4"-20 x 1"
#3 0.036" (20 ga.) 100
1/4"-20 x 1" (w/nut) #3
to
100
1/4"-20 x 1-1/2"
#3
0.188" (3/16") 100
1/4"-20 x 1-1/2" (w/nut) #3
100
12-24 x 1-1/2"
#5
0.188" (3/16") 100
12-24 x 1-1/2" (w/nut) #5
to 0.5" (1/2") 100
1/4" & 3/8" Blue Concrete Driver
Red Universal
Driver
Wood Vertical Hanger
Abrasives
Part
No.
7163
7203
7165
7167
7169
7162
7164
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
Screw Shank
Size & Length
1/4" x 2"
1/4" x 1"
1/4" x 2"
1/4" x 3"
1/4" x 4"
3/8" x 2-1/2"
3/8" x 2-1/2"
Point
Style
Type 17
Type 17
Type 17
Type 17
Type 17
Type 17
Type 17
Pre-Drilling
Diameter
1/8"
(if
required)
1/8" (if
required)
Std
Box
100
100
100
100
100
100
100
OnSite
Supply
Part
No.
7185
7205
7170
7156
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
Screw Shank
Size & Length
1/4" x 1"
1/4" x 1"
1/4" x 2"
1/4" x 2-1/2"
Safety
Point
Style
Type 17
Type 17
Type 17
Type 17
Pre-Drilling
Diameter
1/8"
(if required)
Std
Box
100
100
100
100
Point
Style
Wedge
Bolt
OT
Pre-Drilling
Diameter
1/4" ANSI
1/4" ANSI
3/8" ANSI
Std
Box
100
100
50
Concrete Vertical Hanger
Part
No.
7171
7173
7175
Rentals
16
Rod
Dia.
1/4"
3/8"
1/2"
Vertigo™ Tool Kit #5864
• Sleeve assembly, (same as cat. #
5874), 1/4" and 3/8" blue concrete
drive sockets and red universal drive
socket. (SDS Drill bit not included)
Wood Side Hanger
Sleeve Assembly (5874)
Screw Shank
Size & Length
1/4" x 1-1/4"
1/4" x 1-1/2"
3/8" x 2-3/4"
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Additional Accessories
#5866 1/4" x 6" Hex Shank 1
SDS Drill Bit
#5874 Sleeve Assembly only 1
See page 98 in our Anchor
Section for complete
Vertigo Listings
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
AVAILABLE
ON REQUEST
Low Carbon Finished Hex
Nuts Grade 2
MADE IN THE USA
Low Carbon Heavy Hex
Nuts
AVAILABLE
ON REQUEST
• Low Carbon Steel Flange Bolt
• Heavy Hex Head (A307B)
• Flat Washer Low Carbon Steel
Strut
MADE IN THE USA
A242 Heavy Hex Nuts
• Medium Carbon Steel - Heat Treated
• Applications are in maintenance (GR-5) and DOT Projects
(A449)
• Finished Hex Head (A499 - Heavy Hex over 1-1/2 inch dia.)
• Flat Washers GR-2 or GR-8 or F436
Medium Carbon Grade 5
Finished or Heavy DH
• Alloy Steel - Heat Treated
• For High Strength Applications
• Finished Hex Head (Yellow Zinc Plating)
• Flat Washers Grade 8 - Alloy Steel
Alloy Steel Grade 8
Heavy Hex High Strength
(A194) 2H or DH
MADE IN THE USA
AVAILABLE
ON REQUEST
Tools
• High Strength Structural Steel - Heat Treated
• Used in Iron Works and Steel Erections
• Heavy Hex Head Bolts, T.C. Dome Head
• Flat Washers F436 - High Strength Structural Steel (A325)
AVAILABLE
ON REQUEST
Heavy Hex 2H High
Strength DH (A563)
MADE IN THE USA
• Alloy Steel + Stainless Steel
• Used in High Temperature Application
• Heavy Hex Head Bolt
• Flat Washers F436 - High Strength Structural (A325)
Heavy Hex A194 2H
• 18-8 Stainless Steel is standard and most commonly
used (Type 303 or 304)
• General Purpose for Flange Bolting
• Flat Washer 18-8 /304 Stainless Steel
• Type 304 Stainless Steel made to A193 B8 specification
• General Purpose for Flange Bolting for corrosion
resistant applications
• 1/2” Diameter and up - Heavy Hex unless otherwise specified
• Flat Washer 304 S/S
• Type 316 Stainless Steel Standard or A193 B8M to Specifications
• Pipe Flange Bolting for high corrosion resistant
applications
• A193 B8M 1/2” Diameter and up - Heavy Hex Unless
Otherwise Specified
Abrasives
• High Strength Structural Steel - (Used in iron works
and steel erections)
• A325 - Heavy Hex Head Bolt
• T.C. - Dome Head Bolt
• Flat Washers F436 - High Strength Structural (A325)
Pipe
Hangers
• ASTM A242 (CORTEN) High Strength Low Alloy
• “T” Head Style for Water Works Applications
• Nut is included when ordering “T” Head Bolt
Finished Hex or Heavy
Finished Hex or Heavy Hex
A194 Grade 8
Finished Hex or Heavy Hex
316 S/S or A194 Grade 8M
OnSite
Supply
• Low Carbon Steel - General Purpose
• Standard Flange Bolt Material
• Finished Hex Head
• Flat Washer Low Carbon Steel
Fasteners
Hex Nuts
Threaded
Rod
Description / Application
Safety
Bolt Type
Anchors
bolting basics
This Chart is for Reference Only - Consult Specifications Before Use - Available on Request
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
17
Rentals
• Flat Washer 316 S/S
Fasteners
tension control (tc) bolts
TC (Tension Control) Bolts
Anchors
• TC Bolts know when the specified tension has been
reached; the special tip shears
• No operator or tool can accidentally over tension - It’s
a calibrated bolt
• Visual inspection: when the tip is gone, tension is
correct
• TC Bolts are installed faster with less operator fatigue
• Noiseless installation
• One man installation
• Provides absolute traceability and world
class quality
MADE IN THE USA
Strut
TC Bolt
Installation
Tool
Threaded
Rod
Specify F1852 (A325) and A490 when ordering
Pipe
Hangers
Length Plain
Galvanized
Tools
Abrasives
OnSite
Supply
Safety
3/4 - 10 Nominal Size & Threads
1-3/4
75C175TCB
75C175TCB0M
2
75C200TCB
75C200TCB0M
2-1/4
75C225TCB
75C225TCB0M
2-1/2
75C250TCB
75C250TCB0M
2-3/4
75C275TCB
75C275TCB0M
3
75C300TCB
75C300TCB0M
3-1/4
75C325TCB
75C325TCB0M
3-1/2
75C350TCB
75C350TCB0M
3-3/4
75C375TCB
75C375TCB0M
4
75C400TCB
75C400TCB0M
4-1/4
75C425TCB
75C425TCB0M
4-1/2
75C450TCB
75C450TCB0M
4-3/4
75C475TCB
75C475TCB0M
5
75C500TCB
75C500TCB0M
5-1/4
75C525TCB
75C525TCB0M
5-1/2
75C550TCB
75C550TCB0M
5-3/4
75C575TCB
75C575TCB0M
6
75C600TCB
75C600TCB0M
7/8 - 9 Nominal Size & Threads
2
87C200TCB
87C200TCB0M
2-1/4
87C225TCB
87C225TCB0M
2-1/2
87C250TCB
87C250TCB0M
2-3/4
87C275TCB
87C275TCB0M
3
87C300TCB
87C300TCB0M
3-1/4
87C325TCB
87C325TCB0M
3-1/2
87C350TCB
87C350TCB0M
3-3/4
87C375TCB
87C375TCB0M
4
87C400TCB
87C400TCB0M
4-1/4
87C425TCB
87C425TCB0M
4-1/2
87C450TCB
87C450TCB0M
4-3/4
87C475TCB
87C475TCB0M
5
87C500TCB
87C500TCB0M
5-1/4
87C525TCB
87C525TCB0M
5-1/2
87C550TCB
87C550TCB0M
6
87C600TCB
87C600TCB0M
Rentals
18
Length Plain
Galvanized
1 - 8 Nominal Size & Threads
2
100C200TCB 100C200TCB0M
2-1/4
100C225TCB 100C225TCB0M
2-1/2
100C250TCB 100C250TCB0M
2-3/4
100C275TCB 100C275TCB0M
3
100C300TCB 100C300TCB0M
3-1/4
100C325TCB 100C325TCB0M
3-1/2
100C350TCB 100C350TCB0M
3-3/4
100C375TCB 100C375TCB0M
4
100C400TCB 100C400TCB0M
4-1/4
100C425TCB 100C425TCB0M
4-1/2
100C450TCB 100C450TCB0M
4-3/4
100C475TCB 100C475TCB0M
5
100C500TCB 100C500TCB0M
5-1/4
100C525TCB 100C525TCB0M
5-1/2
100C550TCB 100C550TCB0M
5-3/4
100C575TCB 100C575TCB0M
6
100C600TCB 100C600TCB0M
1-1/8 - 7 Nominal Size & Threads
2-3/4
112C275TCB 112C275TCB0M
3
112C300TCB 112C300TCB0M
3-1/4
112C325TCB 112C325TCB0M
3-1/2
112C350TCB 112C350TCB0M
3-3/4
112C375TCB 112C375TCB0M
4
112C400TCB 112C400TCB0M
4-1/4
112C425TCB 112C425TCB0M
4-1/2
112C450TCB 112C450TCB0M
4-3/4
112C475TCB 112C475TCB0M
5
112C500TCB 112C500TCB0M
5-1/2
112C550TCB 112C550TCB0M
6
112C600TCB 112C600TCB0M
We repair and rent tools.
Hartford, CT
800-969-0285
• Specifically de-
signed for use with
tension control, or
twist off type bolts.
• One sided, one man
installation.
• Lightweight, electric operation.
• Low maintenance.
• Quiet, non-impacting operation.
• No tool or air compressor
calibration.
• Reduced operator fatigue.
Part No.
Description
S60EZA
S90EZA
S110EZ
S80EZ
5/8" - 7/8" dia. TC Bolts
1", 3/4 & 7/8" dia. TC Bolts
Up to 1-1/8" dia. TC Bolts
Compact Wrench
Determining Proper
Bolt Length
Exclusive of washers the
lengths determined by
the use of this table
should be rounded up to
the next 1/4”.
To determine the required bolt length, ADD
the length shown to the Grip Length.
Bolt Size
5/8"
3/4"
7/8"
1"
Add
7/8"
1"
1-1/8"
1-1/4"
Mechanical Specifications
Bolts (A325)
<3 x Diameter - Hardness: Brinnell Min.-Max.
253 - 319; Rockwell C Min.-Max. C25 - C32
>3 x Diameter - Hardness: Brinnell Min.-Max. -319; Rockwell C Min.-Max. - -C34.
Bolts (A490)
<3 x Diameter - Hardness: Brinnell Min.-Max.
311 - 352; Rockwell C Min.-Max. C33 - C38
>3 x Diameter - Hardness: Brinnell Min.-Max. -352; Rockwell C Min.-Max. - -C38.
Nuts
Grade A-194 2H; Proof Load Stress (KSI):
175, Hardness: Brinnell Min. - Max. 248-352 Rockwell Min. - Max. C24-C38
Washers
Grade: F-436; Rockwell Hardness C38 - C45
Complete Specifications are available upon request.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Type CA Stud
Headed Concrete Anchor - Full Weld Base
D
L #1
H
HT
FD
FH
Min. Length
Stud
Head
Head
Weld Fillet
Weld Fillet
Dia. B4 Weld
Part No.
Dia.
Height Min.
Dia.
Height
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1011-08-018
1011-08-024
1011-08-026
1011-08-034
1011-08-042
1011-08-050
1011-08-066
1011-08-085
1011-08-098
1011-08-130
1
1
1
1
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
1-1/8
1-1/2
1-5/8
2-1/8
2-5/8
3-1/8
4-1/8
5-5/16
6-1/8
8-1/8
Light Duty
Split
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
Standard
Combination
Chuck
Foot
Grip
Part
No.
Part
No.
Part
No.
Foot #3
and
Grip
8032
8032
8032
8032
8032
8032
8032
8032
8032
8032
11125
11125
11125
11125
11125
11125
11125
11125
11125
11125
8053
8053
8053
8053
8053
8053
8053
8053
8053
8053
8126
8126
8126
8126
8126
8126
8126
8126
8126
8126
F Ferrule Supplied
#2
D
L #1
H
HT
FD
FH
Min. Length
Stud
Head
Head
Weld Fillet
Weld Fillet
Part No.
Dia.
Height Min.
Dia.
Height
Dia. B4 Weld
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Standard
Combination
Chuck
Foot
Grip
Part
No.
Part
No.
Part
No.
Foot #3
and
Grip
1112
1112
1112
1112
1112
1112
1112
1112
1112
1112
8054
8054
8054
8054
8054
8054
8054
8054
8054
8054
8127
8127
8127
8127
8127
8127
8127
8127
8127
8127
3/4 3-3/16
1011-12-051 1-1/4 3/8
1-1/16
1/4
8038
3/4 3-11/16
1011-12-059 1-1/4 3/8
1-1/16
1/4
8038
3/4 4-3/16
1011-12-067 1-1/4 3/8
1-1/16
1/4
8038
3/4 4-11/16
1011-12-075 1-1/4 3/8
1-1/16
1/4
8038
3/4 5-3/16
1011-12-083 1-1/4 3/8
1-1/16
1/4
8038
3/4 6-3/16
1011-12-099 1-1/4 3/8
1-1/16
1/4
8038
3/4 7-3/16
1011-12-115 1-1/4 3/8
1-1/16
1/4
8038
3/4 8-3/16
1011-12-131 1-1/4 3/8
1-1/16
1/4
8038
3/4 9-3/16
1011-12-147 1-1/4 3/8
1-1/16
1/4
8038
3/4 10-3/16
1011-12-163 1-1/4 3/8
1-1/16
1/4
8038
#1.Tru-weld Studs are available in any required length above the standard minimum.
#2. Listed Ferrule is for standard flat down hand position.
#3. Requires use of P/N-11101 dual leg adapter.
Philadelphia, PA
610-647-8070
Light Duty
Split
Hartford, CT
800-969-0285
19
OnSite
Supply
Type
After Weld
Safety
Before Weld
Rentals
Type SC Stud
Shear Connector - Full Weld Base
Abrasives
Tools
#1.Tru-weld Studs are available in any required length above the standard minimum.
#2. Listed Ferrule is for standard flat down hand position.
#3. Requires use of P/N-11101 dual leg adapter.
Strut
#2
After Weld
Threaded
Rod
Before Weld
F Ferrule Supplied
Pipe
Hangers
Type
Fasteners
Anchors
stud welding
Fasteners
A-325 STRUCTURAL BOLTS
AVAILABLE
ON REQUEST
A325-3
A490-3
MADE IN THE USA
Anchors
Structural Bolts - A325 Heavy Hex Bolts
Strut
• Heavy Hex Bolts with a washer-face on the underside of
•• A325-T full-thread in Type I only
the head primarily used in Structural Steel joints.
•• Type I available in 1/2" through 1¼" diameters
• Available in Black (Plain), Hot Dip Galvanized and Me•• Type III available in 3/4" through 1" diameters
chanical Galvanized Finishes.
•• Specify Finish & Type (I or III) when ordering.
• Available in Type I & Type III (Weathering Steel)
• A325-T full-thread in Type I only
Available in Metric (A325M), M20, M22 & M25 diameters up to 170 mm in length. Black (Plain), Hot Dip
Galvanized & Mechanical Galvanized Finishes. Please call for availability and pricing.
Length
(Black)
Plain
Galvanized
Hot Dip
Mechanical
Length
Threaded
Rod
Pipe
Hangers
50C125A3O
50C150A3O
50C175A3O
50C200A3O
50C225A3O
50C250A3O
50C275A3O
50C300A3O
50C325A3O
50C350A3O
50C375A3O
50C400A3O
50C125A3OH
50C150A3OH
50C175A3OH
50C200A3OH
50C225A3OH
50C250A3OH
50C275A3OH
50C300A3OH
50C325A3OH
50C350A3OH
50C375A3OH
50C400A3OH
50C125A3O0M
50C150A3O0M
50C175A3O0M
50C200A3O0M
50C225A3O0M
50C250A3O0M
50C275A3O0M
50C300A3O0M
50C325A3O0M
50C350A3O0M
50C375A3O0M
50C400A3O0M
5/8 - 11 Nominal Size and Threads
Tools
Abrasives
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
62C150A3O
62C175A3O
62C200A3O
62C225A3O
62C250A3O
62C275A3O
62C300A3O
62C325A3O
62C350A3O
62C375A3O
62C400A3O
62C450A3O
62C500A3O
62C550A3O
62C150A3OH
62C175A3OH
62C200A3OH
62C225A3OH
62C250A3OH
62C275A3OH
62C300A3OH
62C325A3OH
62C350A3OH
62C375A3OH
62C400A3OH
62C450A3OH
62C500A3OH
62C550A3OH
62C150A3O0M
62C175A3O0M
62C200A3O0M
62C225A3O0M
62C250A3O0M
62C275A3O0M
62C300A3O0M
62C325A3O0M
62C350A3O0M
62C375A3O0M
62C400A3O0M
62C450A3O0M
62C500A3O0M
62C550A3O0M
3/4 - 10 Nominal Size and Threads
OnSite
Supply
Safety
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
6-1/2
7
Rentals
20
75C150A3O
75C175A3O
75C200A3O
75C225A3O
75C250A3O
75C275A3O
75C300A3O
75C325A3O
75C350A3O
75C375A3O
75C400A3O
75C450A3O
75C500A3O
75C550A3O
75C600A3O
75C650A3O
75C700A3O
75C150A3OH
75C175A3OH
75C200A3OH
75C225A3OH
75C250A3OH
75C275A3OH
75C300A3OH
75C325A3OH
75C350A3OH
75C375A3OH
75C400A3OH
75C450A3OH
75C500A3OH
75C550A3OH
75C600A3OH
75C650A3OH
75C700A3OH
75C150A3O0M
75C175A3O0M
75C200A3O0M
75C225A3O0M
75C250A3O0M
75C275A3O0M
75C300A3O0M
75C325A3O0M
75C350A3O0M
75C375A3O0M
75C400A3O0M
75C450A3O0M
75C500A3O0M
75C550A3O0M
75C600A3O0M
75C650A3O0M
75C700A3O0M
Hartford, CT
800-969-0285
Galvanized
Hot Dip
Mechanical
3/4 - 10 Nominal Size and Threads
1/2 - 13 Nominal Size and Threads
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
(Black)
Plain
7-1/2
8
9
9-1/2
10
75C750A3O
75C800A3O
75C900A3O
75C950A3O
75C1000A3O
75C750A3OH
75C800A3OH
75C900A3OH
75C950A3OH
75C1000A3OH
75C750A3O0M
75C800A3O0M
75C900A3O0M
75C950A3O0M
75C1000A3O0M
7/8 - 9 Nominal Size and Threads
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
2-1/4
2-1/2
2-3/4
3
Boston , MA
800-645-6155
87C175A3O
87C200A3O
87C225A3O
87C250A3O
87C275A3O
87C300A3O
87C325A3O
87C350A3O
87C375A3O
87C400A3O
87C450A3O
87C500A3O
87C550A3O
87C600A3O
87C650A3O
87C700A3O
87C750A3O
87C175A3OH
87C200A3OH
87C225A3OH
87C250A3OH
87C275A3OH
87C300A3OH
87C325A3OH
87C350A3OH
87C375A3OH
87C400A3OH
87C450A3OH
87C500A3OH
87C550A3OH
87C600A3OH
87C650A3OH
87C700A3OH
87C750A3OH
87C175A3O0M
87C200A3O0M
87C225A3O0M
87C250A3O0M
87C275A3O0M
87C300A3O0M
87C325A3O0M
87C350A3O0M
87C375A3O0M
87C400A3O0M
87C450A3O0M
87C500A3O0M
87C550A3O0M
87C600A3O0M
87C650A3O0M
87C700A3O0M
87C750A3O0M
1 - 8 Nominal Size and Threads
100C200A3O
100C225A3O
100C250A3O
100C275A3O
100C300A3O
100C325A3O
100C350A3O
100C375A3O
100C400A3O
100C450A3O
100C500A3O
100C550A3O
100C600A3O
100C650A3O
100C700A3O
100C750A3O
100C200A3OH
100C225A3OH
100C250A3OH
100C275A3OH
100C300A3OH
100C325A3OH
100C350A3OH
100C375A3OH
100C400A3OH
100C450A3OH
100C500A3OH
100C550A3OH
100C600A3OH
100C650A3OH
100C700A3OH
100C750A3OH
100C200A3O0M
100C225A3O0M
100C250A3O0M
100C275A3O0M
100C300A3O0M
100C325A3O0M
100C350A3O0M
100C375A3O0M
100C400A3O0M
100C450A3O0M
100C500A3O0M
100C550A3O0M
100C600A3O0M
100C650A3O0M
100C700A3O0M
100C750A3O0M
1-1/8 - 7 Nominal Size and Threads
112C225A3O
112C250A3O
112C275A3O
112C300A3O
112C225A3OH
112C250A3OH
112C275A3OH
112C300A3OH
Washington D.C.
877-419-2755
112C225A3O0M
112C250A3O0M
112C275A3O0M
112C300A3O0M
Philadelphia, PA
610-647-8070
(Black)
Length
Plain
Also available in Cast Iron O.G. Washers
and Cast Iron Bridge or Timber Washers.
Galvanized
Galvanized
Hot Dip
Mechanical
1-1/8 - 7 Nominal Size and Threads
112C325A3O0M
112C350A3O0M
112C375A3O0M
112C400A3O0M
112C450A3O0M
112C500A3O0M
112C550A3O0M
112C600A3O0M
112C650A3O0M
112C700A3O0M
112C750A3O0M
Hot Dip
Galvanzied
Qty.
25DBEW
31DBEW
37DBEW
50DBEW
62DBEW
75DBEW
87DBEW
100DBEW
25DBEWH
31DBEWH
37DBEWH
50DBEWH
62DBEWH
75DBEWH
87DBEWH
100DBEWH
100
100
100
50
25
20
15
10
How Much Squirt is Tight?
• Flexible silicone is embedded in the
depressions under the bumps.
• Tighten the bolt until the calibrated
amount of organe silicone appears
from under the squirt locations.
Size
Part No.
3/4
7/8
1
75DLIWSQ
87DLIWSQ
100DLIWSQ
A490 Hex Bolt w/Nut
Type 1 Plain
Length
Part No.
7/8 - 9 Nominal Size & Threads
A325 Flat Washers (ASTM F436)
• Plain or Hot Dip Galvanized Finish.
• Call for complete specifications.
Size
Plain
HDG
Size
Plain
1/2
5/8
3/4
7/8
50DA3W
62DA3W
75DA3W
87DA3W
50DA3WH
62DA3WH
75DA3WH
87DA3WH
1
1-1/8
1-1/4
1-1/2
100DA3W
112DA3W
125DA3W
150DA3W
HDG
100DA3WH
112DA3WH
125DA3WH
150DA3WH
Size
DH
Size
DH 3 Type III
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4-7
50CDHH
62CDHH
75CDHH
87CDHH
100CDHH
112CDHH
125CDHH
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4- 7
50CHHN/A563DH3
62CHHN/A563DH3
75CHHN/A563DH3
87CHHN/A563DH3
100CHHN/A563DH3
112CHHN/A563DH3
125CHHN/A563DH3
2
3
5
6
7
7-1/2
Washington D.C.
877-419-2755
87C200A4O
87C300A4O
87C500A4O
87C600A4O
87C700A4O
87C750A4O
1-8 Nominal Size & Threads
2-3/4
3
3-1/2
3-3/4
4
4-1/4
4-1/2
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
Length
Part No.
1-8 Nominal Size & Threads
4-3/4
5
5-1/2
6-1/2
6-1/2
7
9
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
100C275A4O
1-1/4 - 7 Nominal Size & Threads
1
2
2-1/4
2-1/2
3-3/4
11
ASTM A563 ASTM A563
Grade C
Grade C3
75C100A4O
75C200A4O
75C225A4O
75C250A4O
75C375A4O
75C1100A4O
ASTM A563 ASTM A563
Grade DH
Grade DH3
ASTM A563 Grade DH & DH3
Structural Nuts
Finishes:
Philadelphia, PA
610-647-8070
Threaded
Rod
125C225A3O0M
125C250A3O0M
125C275A3O0M
125C300A3O0M
125C325A3O0M
125C350A3O0M
125C375A3O0M
125C400A3O0M
125C450A3O0M
125C500A3O0M
125C550A3O0M
125C600A3O0M
125C650A3O0M
125C700A3O0M
125C750A3O0M
Pipe
Hangers
125C225A3OH
125C250A3OH
125C275A3OH
125C300A3OH
125C325A3OH
125C350A3OH
125C375A3OH
125C400A3OH
125C450A3OH
125C500A3OH
125C550A3OH
125C600A3OH
125C650A3OH
125C700A3OH
125C750A3OH
Plain
Boston , MA
800-645-6155
Grade DH - Black (Plain), mechanical & hot
dipped galvanized.
Grade DH3 - Black Type III weathering steel
Hartford, CT
800-969-0285
Tools
125C225A3O
125C250A3O
125C275A3O
125C300A3O
125C325A3O
125C350A3O
125C375A3O
125C400A3O
125C450A3O
125C500A3O
125C550A3O
125C600A3O
125C650A3O
125C700A3O
125C750A3O
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
Squirter® DTI's
1-1/4 - 7 Nominal Size and Threads
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
Nominal
ID
Abrasives
112C325A3OH
112C350A3OH
112C375A3OH
112C400A3OH
112C450A3OH
112C500A3OH
112C550A3OH
112C600A3OH
112C650A3OH
112C700A3OH
112C750A3OH
OnSite
Supply
112C325A3O
112C350A3O
112C375A3O
112C400A3O
112C450A3O
112C500A3O
112C550A3O
112C600A3O
112C650A3O
112C700A3O
112C750A3O
Safety
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
21
Rentals
Fasteners
Beveled Square Washers
Strut
Structural Bolts - A325 Heavy Hex Bolts - cont.
Anchors
A325 STRUCTURAL BOLTS / NUTS
Fasteners
HEX BOLTS
Anchors
Hex Cap Screws
Grade 2 Plain & Zinc Plated
Strut
Threaded
Rod
L
e
n
g
t
h
Pipe
Hangers
Tools
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Finished Hex Nuts
Abrasives
OnSite
Supply
Safety
Rentals
22
Pkg. Qty.
9/16-12
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
100
100
100
50
25
20
15
10
10
10
10
5
5
Bulk Qty.
9000
6000
4000
1800
800
500
300
190
140
100
55
30
20
1/4 - 20
5/16 - 18
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/4 - 7
1-1/2 - 6
1-3/4 - 5
2 - 4-1/2
Hartford, CT
800-969-0285
7/8-9
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-8
—
—
—
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Pcs/
Bulk
• Steel
• Zinc Plated
Nuts are used with lowcarbon heavy hex bolts.
Size
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Flat Washers
• Steel
• Zinc Plated
The most versatile and
widely used nut design.
Grade-2 nuts are for use with any low
carbon bolt or screw that is not heattreated, with a specified minimum
tensile strength of 74,000 psi or less.
1/4 - 20
5/16 - 18
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/4 - 7
1-1/2 - 6
1-3/4 - 5
2 - 4-1/2
Diameter
7/16-14 1/2-13
—
—
—
—
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Heavy Hex Nuts
• Steel
• Zinc Plated
Size
• Standard thread length is 2 x diameter + 1/4 inch
• Most sizes also available in bulk
• Other sizes available on request
• Fully Threaded Tap Bolts available
Pkg. Qty.
Bulk Qty.
100
100
100
50
25
20
15
10
10
10
10
10
10
Boston , MA
800-645-6155
5500
3700
2000
1000
540
340
220
150
100
75
40
20
15
Size
Pkg.
Qty.
Bulk
Qty.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
100
100
100
100
50
25
25
25
25
25
25
25
10
50#
50#
50#
50#
50#
50#
50#
50#
50#
50#
50#
50#
50#
Washington D.C.
877-419-2755
7450
4350
3350
1300
650
455
325
265
225
190
190
100
100
Philadelphia, PA
610-647-8070
• Heavy pattern for primary use in
• Special sizes available on request
• Order Heavy Hex Nuts separately
• Specify Finish:
- Plain
- Plated
- Hot Dip Galvanized
Nom.
Pipe
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
22
24
26
30
34
36
42
Bolt
Dia.
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
Philadelphia, PA
610-647-8070
Bolts
Req.
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
20
24
28
32
32
36
*Stud
Length
2-1/4
2-1/4
2-1/2
2-1/4
2-3/4
3
3-1/4
3-1/2
3-1/2
3-1/2
3-3/4
3-3/4
4
4-1/2
4-1/2
5
5-1/4
5-3/4
6
6-1/2
6-3/4
7
7-1/4
8
8-1/4
8-3/4
Washington D.C.
877-419-2755
Bolt
Length
1-3/4
2
2
2-1/4
2-1/4
2-3/4
3
3
3
3
3-1/4
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5-1/4
5-1/2
5-3/4
6
6-1/4
7
7
7-1/2
Strut
1-1/2-6
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
5-1/2
8
Threaded
Rod
1-1/4-7
-
-
-
-
-
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Let Us Help You With Your Next
Bolt & Gasket Kit Inquiry!
Tools
Bolting Dimensions for 150 Lb. Flanges
1-1/8-7
-
-
-
-
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Pipe
Hangers
Diameter
7/8-9
1-8
-
-
-
-
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Abrasives
3/4-10
-
-
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Flange Gasket Kits (Bolt Packs)
Flange Gaskets Only
• Bolts & nuts sized according to specifications given.
Gasket Selection
A. What Style Gasket?
m Ring
m Full Face
m Other______________
D. Pressure (LB.) Size?
m 150 LB.
m 300 LB.
m Other______________
B. What Type Material?
m Synthetic Nitrile
m Neoprene
m Red Rubber
m Other______________
E. Gasket (Pipe) Size?
m 1/2" thru 36"
m Specify_____________
C. Gasket Thickness?
m 1/16
m 1/8
m Other______________
Boston , MA
800-645-6155
F. Pipe Type?
m Iron
m Cast Iron
m Stainless
m Other______________
Hartford, CT
800-969-0285
23
OnSite
Supply
5/8-11
-
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Safety
1/2-13
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
MADE IN THE USA
Rentals
L
e
n
g
t
h
AVAILABLE
ON REQUEST
Fasteners
Heavy Hex Bolts A307 Grade B
Anchors
HEX BOLTS / GASKETS
Fasteners
HEX BOLTS B7 / B7 STUDS
Heavy Hex Bolts - A193 B7
Heavy Hex Head Pattern made of alloy steel for high temperature service
Sizes 3/4-10, 7/8-9 and 1-8 also available in zinc plated
Special sizes available upon request
B-7 studs and bolts in the 1-1/8 inch and larger have an 8 thread pitch series
unless otherwise specified
• Also available in Zinc Plated
Anchors
AVAILABLE
ON REQUEST
•
•
•
•
MADE IN THE USA
Strut
Threaded
Rod
Pipe
Hangers
L
e
n
g
t
h
Tools
1/2-13
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
5/8-11
-
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/4-10
-
-
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Diameter
7/8-9
1-8
-
-
-
-
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Abrasives
Heavy Hex Nuts
ASTM A194 - Grade 2H
Plain - For use with structural bolts and B-7
Hex Bolts and Studs. Available in bulk. Also
available in Zinc Plated.
Size
A194-2H
A194-2H
OnSite
Supply
Safety
Hot Dip Galvanized
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/8 - 8*
1-1/4 - 7
1-1/4 - 8*
1-1/2 - 6
50CTHH
62CTHH
75CTHH
87CTHH
100CTHH
112CTHH
112CTHH
125CTHH
125CTHH
-
50CTHHH
62CTHHH
75CTHHH
87CTHHH
100CTHHH
112CTHHH
125CTHHH
150CTHHH
* For B-7 Bolt and Stud Applications
Rentals
24
Hartford, CT
800-969-0285
1-1/8-7
-
-
-
-
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-1/4-7
-
-
-
-
-
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-1/2-6
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
5-1/2
8
ASTM - A193B7 Studs
• In Stock
Fully Threaded
(Mesured First Thread to First thread Per ASTM
A193 / A320 • (Standard Stock)
1/2" Thru 1-1/2" Diameter Studs
Available in
All Lengths
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Stainless Steel A193 B8
and B8M Bolts
Diameter
7/8-9
1-8
-
-
-
-
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
1-1/8-7
-
-
-
-
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-1/4-7
-
-
-
-
-
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-1/2-6
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
5-1/2
8
Strut
3/4-10
-
-
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Threaded
Rod
5/8-11
-
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
AVAILABLE
ON REQUEST
Pipe
Hangers
1/2-13
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
MADE IN THE USA
ASTM A194 - Grade 8M
Size
18-8 No.
316 No.
Qty.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
25DFLWS
31DFLWS
37DFLWS
50DFLWS
62DFLWS
75DFLWS
87DFLWS
100DFLWS
112DFLWS
125DFLWS
150DFLWS
25DFLW3
31DFLW3
37DFLW3
50DFLW3
62DFLW3
75DFLW3
87DFLW3
100DFLW3
112DFLW3
125DFLW3
150DFLW3
100
100
100
100
25
20
15
10
10
10
10
Type 304 (18-8) Stainless Steel
Type 316 Stainless Steel
Size
A194
Grade 8
A194
8M
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/4 - 7
1-1/2 - 6
50CHHNS/GR8
62CHHNS/GR8
75CHHNS/GR8
87CHHNS/GR8
100CHHNS/GR
112CHHNS/GR
125CHHNS/GR
150CHHNS/GR
50CHHNS/GR8M
62CHHNS/GR8M
75CHHNS/GR8M
87CHHNS/GR8M
100CHHNS/GR8M
112CHHNS/GR8M
125CHHNS/GR8M
150CHHNS/GR8M
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
OnSite
Supply
ASTM A194 - Grade 8
Type 304 (18-8) & Type 316
Stainless Steel Flat Washers
Safety
Heavy Hex Nuts A194
Abrasives
For Standard Stainless Steel 304 / 316 Bolts • See pages 28 and 29
Tools
L
e
n
g
t
h
Anchors
• A193, B8M is 316 SS manufactured to meet A193, B8M specifications - B8M bolts call for A194 Grade 8M Heavy Hex Nuts
25
Rentals
• A193, B8 is 304 SS manufactured to meet A193, B8
specifications - B8 bolts call for A194 Grade 8 Heavy Hex Nuts
Fasteners
HEX BOLTS B8 / B8M
Fasteners
BOLTS
Carriage Screws (Bolts)
• No Nuts
Lag Bolts
• Zinc Plated
Anchors
• Zinc Plated
Strut
Threaded
Rod
L
e
n
g
t
h
Pipe
Hangers
1/4-20
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
—
—
—
Diameter
5/16-18
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
—
—
—
3/8-16
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
12
1/2-13
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
12
5/8-11
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
12
L
e
n
g
t
h
1/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
Diameter
5/16
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
3/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
1/2
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
5/8
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
Tools
Hex Head Tap Bolts - Fully Threaded
Abrasives
The formula for standard thread
length is
2 x diameter + 1/4.
By default, bolts with a length
shorter than
2 times the diameter will be fully
threaded.
OnSite
Supply
Safety
• If you have special needs, call us
and we will track it down for you.
• Low Carbon Steel - Zinc Plated
• Also available in Grade 5
Rentals
26
Hartford, CT
800-969-0285
L
e
n
g
t
h
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
Boston , MA
800-645-6155
Diameter
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
1/2-13
—
—
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
Washington D.C.
877-419-2755
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
Philadelphia, PA
610-647-8070
9/16-12
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
AVAILABLE
ON REQUEST
L
e
n
g
t
h
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Philadelphia, PA
610-647-8070
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
7/8-9
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-8
—
—
—
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Hex Cap Screws
Grade 8 Zinc Plated
MADE IN THE USA
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Diameter
7/16-14 1/2-13
—
—
—
—
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Washington D.C.
877-419-2755
9/16-12
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Boston , MA
800-645-6155
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Hartford, CT
800-969-0285
7/8-9
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-8
—
—
—
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
27
Fasteners
Anchors
Diameter
7/16-14 1/2-13
—
—
—
—
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Strut
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Threaded
Rod
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Pipe
Hangers
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Tools
L
e
n
g
t
h
Abrasives
MADE IN THE USA
OnSite
Supply
Hex Cap Screws
Grade 5 Zinc Plated
Safety
AVAILABLE
ON REQUEST
Rentals
HEX CAP SCREWS GRADE 5 & 8
Fasteners
STAINLESS STEEL HEX CAP SCREWS
Anchors
18-8 Stainless Steel Hex Head Cap
Screws - Type 303/304
AVAILABLE
ON REQUEST
MADE IN THE USA
Strut
Threaded
Rod
Pipe
Hangers
L
e
n
g
t
h
Tools
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
SS304
Type 303 and 304 Stainless Steels make up the majority of fasteners in the
18-8 grouping.
If you have specific 300 Series Stainless Steel requirements, call your
NEFCO Representative.
• Proof Load: None • Yield Strength: 30,000 • Tensile Strength: 75,000
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Diameter
7/16-14 1/2-13
—
—
—
—
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Abrasives
18-8 Stainless Steel
Finished Hex &
Heavy Hex Nuts
9/16-12
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
7/8-9
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-8
—
—
—
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
18-8 Stainless Steel
Flat & Lock
Washers
OnSite
Supply
Safety
Rentals
Size
Finished Hex
Heavy Hex
Size
Flat
Qty.
Lock
Qty.
25CHFNS
31CHFNS
37CHFNS
43CHFNS
50CHFNS
62CHFNS
75CHFNS
87CHFNS
100CHFNS
112CHFNS
125CHFNS
150CHFNS
25CHHNS
31CHHNS
37CHHNS
43CHHNS
50CHHNS
62CHHNS
75CHHNS
87CHHNS
100CHHNS
—
125CHHNS
—
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
—
—
25DFLWS
31DFLWS
37DFLWS
43DFLWS
50DFLWS
62DFLWS
75DFLWS
87DFLWS
100DFLWS
112DFLWS
125DFLWS
150DFLWS
—
—
100
100
100
100
100
25
20
15
10
10
10
10
8NLOWS
10NLOWS
25NLOWS
31NLOWS
38NLOWS
43NLOWS
50NLOWS
62NLOWS
75NLOWS
87NLOWS
100NLOWS
—
—
—
100
100
100
100
100
100
100
100
100
100
100
—
—
—
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/4 - 7
1-1/2 - 6
28
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SS316
Type 316 Stainless Steel has the same strength characteristics as it’s
cousin 18-8. The addition of about 14% nickel gives it a cleaner look and
feel, as well as better corrosion resistance. It has good compatibility with
salt water and caustic chemical environments. Also available in Fine Thread.
316 Stainless Steel
Finished Hex and
Heavy Hex Nuts
Size
Finished Hex
25CHFN3
31CHFN3
37CHFN3
43CHFN3
50CHFN3
62CHFN3
75CHFN3
87CHFN3
100CHFN3
112CHFN3
125CHFN3
150CHFN3
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/4 - 7
1-1/2 - 6
Philadelphia, PA
610-647-8070
Strut
3/4-10
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
7/8-9
—
—
—
—
—
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
1-8
—
—
—
—
—
—
—
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
316 Stainless Steel
Flat and Lock
Washers
Heavy Hex
25CHHN3
31CHHN3
37CHHN3
43CHHN3
50CHHN3
62CHHN3
75CHHN3
87CHHN3
100CHHN3
—
—
—
Washington D.C.
877-419-2755
Size
Flat
Qty.
Lock
Qty.
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
—
—
25DFLW3
31DFLW3
37DFLW3
43DFLW3
50DFLW3
62DFLW3
75DFLW3
87DFLW3
100DFLW3
112DFLW3
125DFLW3
150DFLW3
—
—
100
100
100
100
100
25
20
15
10
10
10
10
8NLOW3
10NLOW3
25NLOW3
31NLOW3
38NLOW3
43NLOW3
50NLOW3
62NLOW3
75NLOW3
87NLOW3
100NLOW3
—
—
—
100
100
100
100
100
100
100
100
100
100
100
—
—
—
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Threaded
Rod
5/8-11
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Pipe
Hangers
9/16-12
—
—
—
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
Tools
Diameter
7/16-14 1/2-13
—
—
—
—
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2-1/4
2-1/4
2-1/2
2-1/2
2-3/4
2-3/4
3
3
3-1/2
3-1/2
4
4
4-1/2
4-1/2
5
5
5-1/2
5-1/2
6
6
6-1/2
6-1/2
7
7
8
8
Abrasives
3/8-16
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
29
OnSite
Supply
5/16-18
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
MADE IN THE USA
Safety
1/4-20
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-1/2
7
8
AVAILABLE
ON REQUEST
Rentals
L
e
n
g
t
h
Fasteners
Type 316 Stainless Steel
Hex Head Cap Screws
Anchors
STAINLESS STEEL HEX CAP SCREWS
Fasteners
FINISHED HEX NUTS
Grade 5
Grade 2
• Plain and Zinc
• Low Carbon -
Plain and Zinc
Anchors
Size
Part No. Part No.
Plain
Zinc
Qty.
Strut
Threaded
Rod
Pipe
Hangers
Tools
Standard Coarse Thread
1/4–20
25CHFN 25CHFNZ 100
5/16–18 31CHFN 31CHFNZ 100
3/8–16
37CHFN 37CHFNZ 100
7/16–14 43CHFN 43CHFNZ 50
1/2–13
50CHFN 50CHFNZ 50
9/16–12 56CHFN 56CHFNZ 25
5/8–11
62CHFN 62CHFNZ 25
3/4–10
75CHFN 75CHFNZ 20
7/8–9
87CHFN 87CHFNZ 15
1–8
100CHFN 100CHFNZ 10
1-1/8–7 112CHFN -
10
1-1/4–7 125CHFN -
5
1-3/8–6 137CHFN -
5
1-1/2–6 150CHFN -
5
2 - 4–5
50CHFN -
5
Fine Coarse Thread
1/4–28
25FHFN 25FHFNZ 100
5/16–24 31FHFN 31FHFNZ 100
3/8–24
37FHFN 37FHFNZ 100
7/16–20 43FHFN 43FHFNZ 50
1/2–20
50FHFN 50FHFNZ 50
9/16–18 56FHFN 56FHFNZ 25
5/8–18
62FHFN 62FHFNZ 25
3/4–16
75FHFN 75FHFNZ 20
7/8–14
87FHFN 87FHFNZ 15
1–14
100FHFN 100FHFNZ 10
10
1-1/8–12 112FHFN -
1-1/4–12 125FHFN -
5
5
1-3/8–12 137FHFN -
1-1/2–12 150FHFN -
5
Abrasives
Hot Dip
Galvanized
OnSite
Supply
Safety
Rentals
Part No.
Coarse Thread
1/4 - 20
25CHFNH
5/16 - 18 31CHFNH
3/8 - 16
37CHFNH
1/2 - 13
50CHFNH
5/8 - 11
62CHFNH
3/4 - 10
75CHFNH
7/8 - 9
87CHFNH
1 - 8
100CHFNH
30
Size
• Yellow Zinc
Part No. Part No.
Plain
Zinc
Qty.
Standard Coarse Thread
1/4 - 20 25CHFN5 25CHFN5Z 100
5/16 - 18 31CHFN5 31CHFN5Z 100
3/8 - 16 37CHFN5 37CHFN5Z 100
7/16 - 14 43CHFN5 43CHFN5Z 50
1/2 - 13 50CHFN5 50CHFN5Z 50
9/16 - 12 56CHFN5 56CHFN5Z 25
5/8 - 11 62CHFN5 62CHFN5Z 25
3/4 - 10 75CHFN5 75CHFN5Z 20
7/8 - 9
87CHFN5 87CHFN5Z 15
1 - 8
100CHFN5 100CHF5NZ 10
Fine Coarse Thread
1/4 - 28 25FHFN5 25FHFN5Z 100
5/16 - 24 31FHFN5 31FHFN5Z 100
3/8 - 24 37FHFN5 37FHFN5Z 100
7/16 - 20 43FHFN5 43FHFN5Z 50
1/2 - 20 50FHFN5 50FHFN5Z 50
9/16 - 18 56FHFN5 56FHFN5Z 25
5/8 - 18 62FHFN5 62FHFN5Z 25
3/4 - 16 75FHFN5 75FHFN5Z 20
7/8 - 14 87FHFN5 87FHFN5Z 15
1 - 14
100FHFN5 100FHF5NZ 10
Size
Part No.
Yellow Zinc
Stand. Coarse Thread
1/4 - 20
25CHFN8Y
5/16 - 18 31CHFN8Y
3/8 - 16
37CHFN8Y
7/16 - 14 43CHFN8Y
1/2 - 13
50CHFN8Y
9/16 - 12 56CHFN8Y
5/8 - 11
62CHFN8Y
3/4 - 10
75CHFN8Y
7/8 - 9
87CHFN8Y
1 - 8
100CHFN8Y
1-1/8 - 7
112CHFN8Y
125CHFN8Y
1-1/4 - 7
1-1/2 - 6
150CHFN8Y
Fine Coarse Thread
25FHFN8Y
1/4 - 28
5/16 - 24 31FHFN8Y
3/8 - 24
37FHFN8Y
7/16 - 20 43FHFN8Y
1/2 - 20
50FHFN8Y
9/16 - 18 56FHFN8Y
5/8 - 18
62FHFN8Y
3/4 - 16
75FHFN8Y
87FHFN8Y
7/8 - 14
1 - 14
100FHFN8Y
125FHFN8Y
1-1/4 - 7
1-1/2 - 6
150FHFN8Y
Qty.
100
100
100
50
50
25
25
20
15
10
10
5
5
100
100
100
50
50
25
25
20
15
10
5
5
Hex Nut & Hex Jam
Nut Specifications &
Dimensions
Source: ANSI / ASME B18. 2.2, 1981
Due to the thickness
of galvanized coating,
galvanized nuts are tapped oversize
to optimize performance.
Size
Grade 8
Qty.
100
100
100
50
25
20
15
10
Nom. Basic
Width
Major Dia. Across Flats
Of Thread Max.
Min.
1/4
0.438 0.428
5/16
0.500 0.489
3/8
0.562 0.551
7/16
0.688 0.675
1/2
0.750 0.736
9/16
0.875 0.861
5/8
0.938 0.922
3/4
1.125 1.088
7/8
1.312 1.269
1
1.500 1.450
1-1/8
1.688 1.631
1-1/4
1.875 1.812
1-3/8
2.062 1.994
1-1/2
2.250 2.175
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Width
Across Corners
Max.
Min.
0.505 0.488
0.577 0.557
0.650 0.628
0.794 0.768
0.866 0.840
1.010 0.982
1.083 1.051
1.299 1.240
1.516 1.447
1.732 1.653
1.949 1.859
2.165 2.066
2.382 2.273
2.598 2.480
Thickness
Of Hex Nut
Max.
Min.
0.226 0.212
0.273 0.258
0.337 0.320
0.385 0.365
0.448 0.427
0.496 0.473
0.559 0.535
0.665 0.617
0.776 0.724
0.887 0.831
0.999 0.939
1.094 1.030
1.206 1.138
1.317 1.245
Washington D.C.
877-419-2755
Thickness
Hex Jam Nuts
Max. Min.
0.163 0.150
0.195 0.180
0.227 0.210
0.260 0.240
0.323 0.302
0.324 0.301
0.387 0.363
0.446 0.398
0.510 0.458
0.575 0.519
0.639 0.579
0.751 0.687
0.815 0.747
0.880 0.808
Philadelphia, PA
610-647-8070
Heavy Hex Nuts
• Plain - For use with structural bolts and B-7 Hex Bolts
and Studs. Available in bulk.
AVAILABLE
ON REQUEST
Anchors
ASTM A194 - Grade 2H
• Also available in Zinc Plated.
MADE IN THE USA
ASTM A194 - Grade 8
Plain and Zinc
• 18-8 Stainless
Fasteners
HEAVY HEX NUTS
• Low Carbon - Plain and Zinc
ASTM A194 - Grade 8M
Hot Dip Galvanized
• 316 Stainless
Zinc
Hot Dip
Galvanized
A194-2H
A194-2H
Hot Dip
Galvanized
A194
Grade 8
A194
8M
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/2 - 13
9/16 - 12
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
1-1/8 - 7
1-1/8 - 8*
1-1/4 - 7
1-1/4 - 8*
1-3/8 - 6
1-1/2 - 6
1-3/4 - 5
25CHHN
31CHHN
37CHHN
43CHHN
50CHHN
56CHHN
62CHFN5
75CHFN5
87CHFN5
100CHFN5
112CHFN5
—
125CHFN5
—
—
150CHFN5
175CHFN5
25CHHNZ
31CHHNZ
37CHHNZ
43CHHNZ
50CHHNZ
56CHHNZ
62CHFN5Z
75CHFN5Z
87CHFN5Z
100CHF5NZ
112CHF5NZ
—
125CHF5NZ
—
—
150CHF5NZ
175CHF5NZ
25CHHNH
31CHHNH
37CHHNH
—
50CHHNH
—
62CHHNH
75CHHNH
87CHHNH
100CHHNH
112CHHNH
—
125CHHNH
—
—
150CHHNH
175CHHNH
25CTHH
31CTHH
37CTHH
43CTHH
50CTHH
—
62CTHH
75CTHH
87CTHH
100CTHH
112CTHH
112CTHH
125CTHH
125CTHH
—
—
—
—
—
—
—
50CTHHH
—
62CTHHH
75CTHHH
87CTHHH
100CTHHH
112CTHHH
—
125CTHHH
—
137CTHHH
150CTHHH
—
—
—
—
—
50CHHNS/GR8
—
62CHHNS/GR8
75CHHNS/GR8
87CHHNS/GR8
100CHHNS/GR
112CHHNS/GR
—
125CHHNS/GR
—
—
150CHHNS/GR
—
—
—
—
—
50CHHNS/GR8M
—
62CHHNS/GR8M
75CHHNS/GR8M
87CHHNS/GR8M
100CHHNS/GR8M
112CHHNS/GR8M
—
125CHHNS/GR8M
—
—
150CHHNS/GR8M
—
* For B-7 Bolt and Stud Applications
Threaded
Rod
Plain
Pipe
Hangers
Size
Tools
Strut
• Low Carbon
1/2
9/16
11/16
3/4
7/8
15/16
1-1/6
1-1/4
1-7/16
1-5/8
1-13/16
2
2-3/16
2-3/8
2-9/16
2-3/4
3-1/8
0.2500
0.3125
0.375
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.1250
1.2500
1.3750
1.5000
1.6250
1.7500
2.0000
0.500
0.562
0.688
0.750
0.875
0.938
1.062
1.250
1.438
1.625
1.812
2.000
2.188
2.375
2.562
2.750
3.125
0.488
0.546
0.669
0.728
0.850
0.909
1.031
1.212
1.394
1.575
1.756
1.938
2.119
2.300
2.481
2.662
3.025
0.577
0.650
0.794
0.866
1.010
1.083
1.227
1.443
1.660
1.876
2.093
2.309
2.526
2.742
2.959
3.175
3.608
0.556
0.622
0.763
0.830
0.969
1.037
1.175
1.382
1.589
1.796
2.002
2.209
2.416
2.622
2.828
3.035
3.449
Thickness of
Hex Nuts
Basic Max. Min.
15/64 0.250
19/64 0.314
23/64 0.377
27/64 0.441
31/64 0.504
35/64 0.568
39/64 0.631
47/64 0.758
55/64 0.885
63/64 1.012
1-7/64 1.139
1-7/32 1.251
1-11/32 1.378
1-15/32 1.505
1-19/32 1.632
1-23/32 1.759
2
2.013
0.218
0.280
0.341
0.403
0.464
0.526
0.587
0.710
0.833
0.956
1.079
1.187
1.310
1.433
1.556
1.679
1.925
Slip-ON® Lock Nut
• Save time and $$$
• Eliminate the threading of
nuts
• Reduce initial installation
cost
Developed with the ability to
be positioned on threaded rod
or bolt at any point, without
the time consuming nuisance
of threading. Just open the
Slip-ON® Lock Nut and insert
where needed. Twist close and
tighten with a wrench. It's that
simple.
See page 173 for ordering
information
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
31
OnSite
Supply
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
Width Acrosss
Corners
Max. Min.
Safety
Width Across
Flats
Basic Max. Min.
Rentals
Nom. Or Basic
Major Dia.
Of Thread
Abrasives
Heavy Hex Nut Dimensions
Fasteners
JAM / LOCK NUTS
Hex Jam Nuts Finish Pattern
Jam Nut Dimensions
Anchors
• Plain and Zinc
Sometimes called a half
nut. When two are used together,
they lock in place.
Size
Part No.
Part No.
Plain Qty
Zinc Qty
Strut
Threaded
Rod
1/4-20 25CHJN 50 25CHJNZ 100
5/16-18 31CHJN 100 31CHJNZ 100
3/8-16 37CHJN 100 37CHJNZ 100
7/16-14 43CHJN 15 43CHJNZ 50
1/2-13 50CHJN 20 50CHJNZ 50
9/16-12 56CHJN 25 56CHJNZ 25
5/8-11 62CHJN 100 62CHJNZ 25
3/4-10 75CHJN 50 75CHJNZ 20
7/8-9 87CHJN 25 87CHJNZ 15
1-8
100CHJN 10 100CHJNZ 10
1-1/8–7 112CHJN 10 112CHJNZ 10
1-1/4–7 125CHJN 5 125CHJNZ 5
1-1/2–6 150CHJN 5 150CHJNZ 5
Pipe
Hangers
Nylon Insert Lock
Nuts
• Zinc Plated
Size
Part No.
Qty
NM-Machine Screw Sizes
Tools
4–40
5–40
6–32
8–2
10–24
10–32
4CNMNZ
5CNMNZ
6CNMNZ
8CNMNZ
10CNMNZ
10FNMNZ
100
100
100
100
100
100
NE-Coarse Thread
Abrasives
OnSite
Supply
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
9/16–12
5/8–11
3/4–10
7/8–9
1–8
25CNENZ
31CNENZ
37CNENZ
43CNENZ
50CNENZ
56CNENZ
62CNENZ
75CNENZ
87CNENZ
100CNENZ
100
100
100
50
50
50
25
20
15
10
NE-Fine Thread
Safety
Rentals
1/4–28
5/16–24
3/8–24
7/16–20
1/2–20
9/16–18
5/8–18
3/4–16
7/8–14
1–14
32
25FNENZ
31FNENZ
37FNENZ
43FNENZ
50FNENZ
56FNENZ
62FNENZ
75FNENZ
87FNENZ
100FNENZ
100
100
100
50
50
100
25
20
15
10
Nom. Or Basic
Major Dia.
Of Thread
1/4
0.2500
5/16 0.3125
3/8
0.3750
7/16 0.4375
1/2
0.5000
9/16 0.5625
0.982 5/16
5/8
0.6250
1.051 3/8
3/4
0.7500
1.240 27/64
7/8
0.8750
Width Across
Flats
Basic
Max.
7/16
0.438
1/2
0.500
9/16
0.562
11/16
0.688
3/4
0.750
7/8
0.875
0.324
0.938
15/16
1.125
0.387
1.312
1-1/8
1.500
0.446
1.688
1-15/16 1.875
Min.
0.428
0.489
0.551
0.675
0.736
0.861
0.922
1.088
1.269
1.450
1.631
1.812
Jam Nylon Insert
Lock Nuts
• Zinc Plated
Part No.
Qty
NTE-Coarse Thread
1/4–20
5/16–18
3/8–16
1/2–13
5/8–11
3/4–10
25CNTEZ
31CNTEZ
37CNTEZ
50CNTEZ
62CNTEZ
75CNTEZ
100
100
100
50
25
20
NE-Fine Thread
1/4– 28
5/16–24
3/8–24
7/16–20
1/2–20
5/8–18
3/4–16
7/8–14
1–14
1-1/4–12
1-1/2–12
Thickness of
Hex Nuts
Basic Max. Min.
15/32 0.163 0.150
3/16
0.195 0.180
7/32
0.227 0.210
1/4
0.260 0.240
5/16
0.323 0.302
5/16
0.324 0.301
3/8
0.387 0.363
27/64 0.446 0.398
31/64 0.510 0.458
35/64 1.575 0.519
39/64 1.639 0.579
23/32 1.751 0.687
Reversible Lock
Nuts
• Zinc Plated
Size
Width Acrosss
Corners
Max.
Min.
0.505 0.488
0.577 0.557
0.650 0.628
0.794 0.768
1.866 0.840
1.010 0.982
1.083 1.051
1.299 1.240
1.516 1.447
1.732 1.653
1.949 1.859
2.165 2.066
25FNTEZ
31FNTEZ
37FNTEZ
43FNTEZ
50FNTEZ
62FNTEZ
75FNTEZ
87FNTEZ
100FNTEZ
125FNTEZ
150FNTEZ
100
100
100
100
100
100
100
100
100
25
25
Size
Part No.
Qty.
Coarse Thread
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
9/16–12
5/8–11
3/4–10
7/8–9
1–8
25CRLNZ
31CRLNZ
37CRLNZ
43CRLNZ
50CRLNZ
56CRLNZ
62CRLNZ
75CRLNZ
87CRLNZ
100CRLNZ
100
100
100
100
100
100
100
100
100
100
Fine Thread
1/4–28
5/16–24
1/2–20
25FRLNZ
31FRLNZ
50FRLNZ
100
100
100
Kep Lock Nuts
Attached external tooth
lock washer.
• Zinc Plated
Size
Serrated Flange
Nuts
• Zinc Plated
Size
Part No.
Qty.
1/4–20
5/16–18
3/8–16
1/2–13
25CSFNZ
31CSFNZ
37CSFNZ
50CSFNZ
100
100
100
50
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
Qty.
Coarse Thread
4–40
6–32
8–32
10–24
1/4–20
5/16–18
3/8–16
4CKENZ
6CKENZ
8CKENZ
10CKENZ
25CKENZ
31CKENZ
37CKENZ
100
100
100
100
100
100
100
Fine Thread
10–32
1/4–28
Washington D.C.
877-419-2755
10FKENZ
25FKENZ
100
100
Philadelphia, PA
610-647-8070
Fine Thread
1/4–28
5/16–24
3/8–24
7/16–20
1/2–20
9/16–18
5/8–18
3/4–16
7/8–14
1–14
25FCLOZ
31FCLOZ
37FCLOZ
43FCLOZ
50FCLOZ
56FCLOZ
62FCLOZ
75FCLOZ
87FCLOZ
100FCLOZ
100
100
100
50
50
25
25
20
15
10
Coil Thread Nuts
- Plain
• See Threaded Rod
Section for coil rod
Size
Part No.
Qty
1/2–6
3/4–4-1/2
1–3-1/2
50KCNU
75KCNU
100KCNU
100
50
50
Square Nuts
• Low Carbon - Zinc
Plated
Size
Part No.
Qty
1/4–20
5/16–18
3/8–16
1/2–13
5/8–11
3/4–10
7/8– 9
25CSQNZ
31CSQNZ
37CSQNZ
50CSQNZ
62CSQNZ
75CSQNZ
87CSQNZ
100
100
100
50
25
20
15
Philadelphia, PA
610-647-8070
Size
Part No.
Qty.
Coarse Thread
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
9/16–12
5/8–11
3/4–10
7/8–9
1–8
25CHSNZ
31CHSNZ
37CHSNZ
43CHSNZ
50CHSNZ
56CHSNZ
62CHSNZ
75CHSNZ
87CHSNZ
100CHSNZ
100
100
100
100
100
100
100
100
100
100
1/4–20 x 7/8
5/16–18 x 7/8
3/8–16 x 1-1/8
7/16–14 x 1-1/4
1/2–13 x 1-1/4
5/8–11 x 2-1/8
3/4–10 x 2-1/2
7/8–9 x 2-1/2
1–8 x 2-3/4
1–1/8 -7 x 3
1–1/4-7 x 3-3/4
1–1/2-6 x 4
1–3/4-5 x 4-1/2
2–4-1/2 x 5
25CROCZ
31CROCZ
37CROCZ
43CROCZ
50CROCZ
62CROCZ
75CROCZ
87CROCZ
100CROCZ
112CROCZ
125CROCZ
150CROCZ
175CROCZ
200CROCZ
100
100
100
100
50
25
20
15
10
1
1
1
1
1
Long Length
3/8–16 x 1-3/4 37C175RCLZ 100
1/2–13 x 1-3/4 50C175RCLZ 100
5/8–11 x 2-3/4 62C275RCLZ 100
Wing Nuts
• Cold forged
• Zinc Plated
Size
Part No.
Qty.
6–32
8–32
10–24
10–32
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
5/8–11
3/4–10
6CWINZ
8CWINZ
10CWINZ
10FWINZ
25CWINZ
31CWINZ
37CWINZ
43CWINZ
50CWINZ
62CWINZ
75CWINZ
100
100
100
100
100
100
100
50
100
25
20
Hex Nuts
Reducing Rod
Coupling Nuts
• Zinc Plated
Size
3/8 x 1/4
3/8 x 5/16
1/2 x 1/4
1/2 x 5/16
1/2 x 3/8
5/8 x 3/8
5/8 x 1/2
3/4 x 5/8
7/8 x 3/4
1 x 7/8
Part No.
Qty
37C25RRCZ
37C31RRCZ
50C25RRCZ
50C31RRCZ
62C37RRCZ
62C50RRCZ
62C50RRCZ
75C62RRCZ
87C75RRCZ
100C87RRCZ
100
100
100
100
100
100
100
100
100
100
• Machine screw
pattern
• Zinc Plated
Size
Part No.
Qty.
2CMSNZ
3CMSNZ
3FMSNZ
4CMSNZ
4CMSNZ
4FMSNZ
5CMSNZ
6CMSNZ
6FMSNZ
8CMSNZ
10CMSNZ
10FMSNZ
12CMSNZ
25CMSNZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
2–56
3–48
3–56
4–36
4–40
4–48
5–40
6–32
6–40
8–32
10–24
10–32
12–24
1/4–20
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Fasteners
Anchors
Qty
Strut
100
100
100
50
50
25
25
20
15
10
Part No.
Pipe
Hangers
25CCLOZ
31CCLOZ
37CCLOZ
43CCLOZ
50CCLOZ
56CCLOZ
62CCLOZ
75CCLOZ
87CCLOZ
100CCLOZ
Size
Tools
Part No.
Qty.
Coarse Thread
Simply state: Size, style and plating
when ordering.
OnSite
Supply
• Also available
cadmium plated - call
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
9/16–12
5/8–11
3/4–10
7/8–9
1–8
• Zinc Plated
• Also available:
Flexloc™ Nuts.
Abrasives
• Zinc Plated
• Zinc Plated
Size
Rod Coupling
Nuts
Tee Nuts
• 3-prong, Zinc Plated
Size
Part No.
6–32
8–32
10–24
10–32
1/4–20
5/16–18
3/8–16
6C25TENZ/3P
8C25TENZ/3P
10C31TENZ/3P
10F31TENZ/3P
25C31TENZ/3P
31C37TENZ/3P
37C43TENZ/3P
Hartford, CT
800-969-0285
Qty.
100
100
100
100
100
100
100
33
Safety
Slotted Nuts
Rentals
All Metal Top Lock
Nuts - Grade C
Threaded
Rod
NUTS / ROD COUPLING
Fasteners
STAINLESS STEEL NUTS
18-8 and 316 Stainless
Steel Finished Hex Nuts
Anchors
Size
Strut
Threaded
Rod
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
5/8–11
3/4–10
7/8–9
1–8
1-1/8–7
1-1/4–7
1-1/2–6
18-8 Stainless Steel Nylon
Insert Lock Nuts
• 316 S/S nylon insert lock nuts also
available.
Pipe
Hangers
18-8 No.
316 No.
Coarse Thread
Qty.
25CHFNS
31CHFNS
37CHFNS
43CHFNS
50CHFNS
62CHFNS
75CHFNS
87CHFNS
100CHFNS
112CHFNS
125CHFNS
150CHFNS
100
100
100
50
50
25
20
15
10
10
10
5
7/16
1/2
9/16
11/16
3/4
15/16
1-1/8
1-5/16
1-1/2
1-11/16
1-7/8
2-1/4
100
100
100
50
50
25
20
15
10
7/16
1/2
9/16
11/16
3/4
15/16
1-1/8
1-5/16
1-1/2
25CHFN3
31CHFN3
37CHFN3
43CHFN3
50CHFN3
62CHFN3
75CHFN3
87CHFN3
100CHFN3
112CHFN3
125CHFN3
150CHFN3
WAF
Size
18-8 No.
Qty.
WAF
4–40
6–32
8–32
10–24
10–32
1/4–20
5/16–18
3/8–16
1/2–13
5/8–11
3/4–10
4CNMNS
6CNMNS
8CNMNS
10CNMNS
10FNMNS
25CNENS
31CNENS
37CNENS
50CNENS
62CNENS
75CNENS
100
100
100
100
100
100
100
50
25
25
20
1/4
5/16
11/32
3/8
3/8
7/16
1/2
9/16
3/4
15/16
1-1/8
Fine Thread
1/4–28
5/16–24
3/8–24
7/16–20
1/2–20
5/8–18
3/4–16
7/8–14
1–14
25FHFNS
31FHFNS
37FHFNS
43FHFNS
50FHFNS
62FHFNS
75FHFNS
87FHFNS
100FHFNS
25FHFN3
31FHFN3
37FHFN3
43FHFN3
50FHFN3
62FHFN3
75FHFN3
87FHFN3
100FHFN3
Tools
18-8 and 316
Stainless Steel Hex Machine
Screw Nuts
Abrasives
Size
18-8 No.
316 No.
Qty
WAF
2–56
4–40
6–32
8–32
10–24
10–32
12–º24
2CMSNS
4CMSNS
6CMSNS
8CMSNS
10CMSNS
10CMSNS
12CMSNS
2CMSN3
4CMSN3
6CMSN3
7CMSN3
10CMSN3
10CMSN3
12CMSN3
100
100
100
100
100
100
100
—
3/16
1/4
1/4
5/16
5/16
—
Size
Part No.
6–32
8–32
10–24
10–32
6CWINS
8CWINS
10CWINS
10FWIN
1/4–20
5/16–18
3/8–16
12–13
25CWINS
31CWINS
37CWINS
50CWINS
Submittals • New Products
Online Catalog
OnSite
Supply
Safety
Rentals
18-8 No.
316 No.
Qty.
WAF
1/4–20
5/16–18
3/8–16
7/16–14
1/2–13
5/8–11
3/4–10
7/8–9
1–8
1-1/4–7
25CHFNS
31CHFNS
37CHFNS
43CHFNS
50CHFNS
62CHFNS
75CHFNS
87CHFNS
100CHFNS
125CHFNS
25CHFN3
31CHFN3
37CHFN3
43CHFN3
50CHFN3
62CHFN3
75CHFN3
87CHFN3
100CHFN3
125CHFN3
100
100
100
50
50
25
20
15
10
10
7/16
1/2
9/16
11/16
3/4
15/16
1-1/8
1-5/16
1-1/2
1-7/8
Hartford, CT
800-969-0285
Part No.
www.GoNefco.com
Size
Size
Be sure to visit our NEW Web Site!
18-8 and 316 Stainless
Steel Heavy Hex Nuts
34
18-8 Stainless Steel
Wing Nuts
See page 25
for B8 and B8M
Stainless Hex Nuts
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Use these diagrams to help find the perfect fastener for your application.
Call and talk to someone on the sales staff today!
Anchors
Nuts Steel - Zinc Plated
Finished Hex
Grade 5
Hex Panel (Pipe)
Stover Flange
Lock Nuts
Finished Hex
Grade 8
Serrated Flange
Castle Nuts
Hex Machine Nut
Nylon Insert Stop
Heavy Hex
Hex M/S Nuts Small
Pattern
Nylon Stop Nuts
Thin Pattern
Slotted Nuts
Hex Jam
Tee Nuts
Cap (Acorn)
K-Lock Nuts
Cold Forged Wing
Finished Hex
Square Machine
Nuts
Stamped Wing
Hex Coupling
Regular Square
Nuts
Two Way Lock
Frame Bolts
Hex Cap Screws
Grade 8
Hanger Bolts
Carriage Bolts
Grade 5
Tap Bolts
Step Bolts
Carriage Bolts
Tap Bolts Grade 5
Hex Lag Screws
Hex Cap Screws
Grade 2
Washington D.C.
877-419-2755
Tools
Safety
Plow Bolts
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
35
Rentals
Philadelphia, PA
610-647-8070
OnSite
Supply
Elevator Bolts
Abrasives
Cap Screws and Bolts - Steel - Zinc Plated
Hex Cap Screws
Grade 5
Pipe
Hangers
Threaded
Rod
Strut
Stover Grade C
Lock Nuts
Flat Slotted
Cap Screws
Fasteners
Fastener Identification Guide
Fasteners
Flat Washers (USS / SAE) / Fender Washers
USS Flat Washers - Steel
AVAILABLE
ON REQUEST
Anchors
• Plain
• Zinc plated
• Hot Dipped Galvanized
Nominal
ID
Plain
Strut
Threaded
Rod
Pipe
Hangers
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
MADE IN THE USA
Zinc
18DFLW
25DFLW
31DFLW
37DFLW
43DFLW
50DFLW
56DFLW
62DFLW
75DFLW
87DFLW
100DFLW
112DFLW
125DFLW
137DFLW
150DFLW
162DFLW
175DFLW
200DFLW
HD
Galvanized
18DFLWZ
25DFLWZ
31DFLWZ
37DFLWZ
43DFLWZ
50DFLWZ
56DFLWZ
62DFLWZ
75DFLWZ
87DFLWZ
100DFLWZ
112DFLWZ
125DFLWZ
137DFLWZ
150DFLWZ
162DFLWZ
175DFLWZ
200DFLWZ
—
25DFLWH
31DFLWH
37DFLWH
43DFLWH
50DFLWH
-
62DFLWH
75DFLWH
87DFLWH
100DFLWH
—
—
—
—
—
—
—
SAE Flat Washers - Steel
• Zinc plated
Pkg.
Qty. (P)
1/4 Keg
50# (B)
100
100
100
100
50
50
50
25
20
15
10
—
—
—
—
—
—
—
18100
7450
4500
3350
2050
1300
1100
650
450
320
260
225
190
150
130
117
100
79
Fender Washers
• Zinc Plated Steel
• 100 per box
Nominal ID
Part No.
3/16 x 1
3/16 x 1-1/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
1/4 x 2
5/16 x 1-1/4
5/16 x 1-1/2
3/8 x 1-1/4
3/8 x 1-1/2
3/8 x 2
1/2 x 1-1/2
1/2 x 2
18D100FEWZ
18D125FEWZ
25D100FEWZ
25D125FEWZ
25D150FEWZ
25D200FEWZ
31D125FEWZ
31D150FEWZ
37D125FEWZ
37D150FEWZ
37D200FEWZ
50D150FEWZ
50D200FEWZ
Flat Washers - Grade 8
Yellow Zinc
AVAILABLE
ON REQUEST
MADE IN THE USA
Tools
Abrasives
OnSite
Supply
Nominal
ID
Zinc
Pkg.
Qty. (P)
Bulk
Qty. (B)
Nominal
ID
USS Yellow
Zinc
SAE Yellow
Zinc
Qty.
#6
#8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
6NSFWZ
8NSFWZ
18DSFWZ
25DSFWZ
31DSFWZ
37DSFWZ
43DSFWZ
50DSFWZ
56DSFWZ
62DSFWZ
75DSFWZ
87DSFWZ
100DSFWZ
112DSFWZ
125DSFWZ
150DSFWZ
100
100
100
100
100
100
50
50
25
25
20
15
10
—
—
—
Inquire
Inquire
21750
11100
9600
7000
5250
2750
2250
1800
1050
800
600
460
315
212
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
25DFLW8Y
31DFLW8Y
37DFLW8Y
43DFLW8Y
50DFLW8Y
56DFLW8Y
62DFLW8Y
75DFLW8Y
87DFLW8Y
100DFLW8Y
25DSFW8Y
31DSFW8Y
37DSFW8Y
43DSFW8Y
50DSFW8Y
56DSFW8Y
62DSFW8Y
75DSFW8Y
87DSFW8Y
100DSFW8Y
100
100
100
100
50
50
25
20
15
10
Belleville Washers - Steel
Safety
• Plain Steel
• Zinc plated
• Stainless Steel
Call us with your
dimensional requirements.
Rentals
36
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
AVAILABLE
ON REQUEST
Fasteners
USS Flat Washers Low Carbon Steel
Anchors
Flat washers (USS / SAE) - dimensions
0.593
0.781
0.906
1.031
1.281
1.406
1.531
1.781
2.031
2.281
2.531
2.781
3.031
3.281
3.531
3.813
4.063
4.313
4.563
4.813
5.063
5.313
5.563
0.531
0.719
0.844
0.969
1.219
1.344
1.469
1.719
1.969
2.219
2.469
2.719
2.969
3.219
3.469
3.687
3.937
4.187
4.437
4.687
4.937
5.187
5.437
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
13/16
15/16
1-1/16
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-3/8
2-5/8
2-7/8
3-1/8
0.281
0.343
0.406
0.469
0.531
0.593
0.656
0.719
0.843
0.969
1.094
1.281
1.406
1.531
1.656
1.813
1.938
2.063
2.188
2.438
2.688
2.938
3.188
Min.
American Std.
(Gauge)
0.250
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.812
0.938
1.063
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.375
2.625
2.875
3.125
18 (3/64)
16 (1/16)
14 (5/64)
14 (5/64)
14 (5/64)
12 (7/64)
12 (7/64)
10 (9/64)
9 (5/32)
8 (11/64)
8 (11/64)
8 (11/64)
8 (11/64)
7 (3/16)
7 (3/16)
7 (3/16)
7 (3/16)
7 (3/16)
7 (3/16)
5 (7/32)
4 (15/64)
3 (1/4)
2 (5/32)
Thickness
Max.
Min.
0.065
0.080
0.104
0.104
0.104
0.132
0.132
0.160
0.177
0.192
0.192
0.192
0.192
0.213
0.213
0.213
0.213
0.213
0.213
0.248
0.280
0.310
0.327
Approx. #
Per 50 lb.
0.036
0.051
0.064
0.064
0.064
0.086
0.086
0.108
0.122
0.136
0.136
0.136
0.136
0.153
0.153
0.153
0.153
0.153
0.153
0.193
0.210
0.228
0.249
18050
7450
4350
3350
2050
1300
1100
650
455
325
265
225
190
150
130
115
100
90
79
60
52
45
43
Threaded
Rod
9/16
3/4
7/8
1
1–1/4
1–3/8
1–1/2
1–3/4
2
2–1/4
2–1/2
2–3/4
3
3–1/4
3–1/2
3–3/4
4
4–1/4
4–1/2
4–3/4
5
5-1/4
5-1/2
Inside Dia.
Nominal Max.
Pipe
Hangers
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1–1/8
1–1/4
1–3/8
1–1/2
1–5/8
1–3/4
1–7/8
2
2–1/4
2–1/2
2-3/4
3
Outside Dia.
Min.
Nominal Max.
Tools
Bolt
Size
Strut
MADE IN THE USA
Philadelphia, PA
610-647-8070
0.406
0.469
0.531
0.583
0.656
0.719
0.843
0.953
1.093
1.219
1.343
1.531
1.781
2.031
2.313
2.563
2.813
3.063
0.344
0.407
0.469
0.531
0.594
0.657
0.781
0.891
1.031
1.157
1.281
1.469
1.719
1.969
2.187
2.437
2.687
2.937
5/32
3/16
7/32
1/4
9/32
11/32
13/32
15/32
17/32
19/32
21/32
13/16
15/16
1-1/16
1-3/16
1-5/16
1-7/16
1-9/16
Washington D.C.
877-419-2755
0.187
0.219
0.250
0.281
0.312
0.375
0.437
0.500
0.562
0.625
0.687
0.843
0.969
1.094
1.251
1.375
1.501
1.625
Min.
American Std.
(Gauge)
0.156
0.188
0.219
0.250
0.281
0.344
0.406
0.469
0.531
0.594
0.656
0.812
0.938
1.062
1.188
1.312
1.438
1.562
18 (3/64)
18 (3/64)
18 (3/64)
16 (1/16)
16 (1/16)
16 (1/16)
16 (1/16)
16 (1/16)
13 (3/32)
13 (3/32)
13 (3/32)
10 (9/64)
10 (9/64)
10 (9/64)
10 (9/64)
9 (5/32)
9 (5/32)
9 (5/32)
Boston , MA
800-645-6155
Thickness
Max.
Min.
.065
.065
.065
.080
.080
.080
.080
.080
.121
.121
.121
.160
.160
.160
.160
.192
.213
.213
Hartford, CT
800-969-0285
Approx. #
Per 50 lb.
.036
.036
.036
.051
.051
.051
.051
.051
.074
.074
.074
.108
.108
.108
.108
.136
.136
.153
39500
29500
22750
14700
11100
9750
7000
5500
2800
2250
1850
1050
775
585
460
335
275
230
37
OnSite
Supply
3/8
7/16
1/2
9/16
5/8
11/16
13/16
59/64
1-1/16
1-3/16
1-5/16
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
Inside Dia.
Nominal Max.
Safety
6
8
3/16
1/2
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
Outside Dia.
Nominal Max.
Min.
Rentals
Bolt
Size
Abrasives
SAE Flat Washers Low Carbon Steel
Fasteners
lock washers
Split Lock Washers
Split Lock Washers Grade 8
• Plain and Zinc Plated
• Yellow Zinc
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Nominal
ID
Part No.
Plain
Part No.
Zinc
Qty.
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1–1/8
1–1/4
1–1/2
—
—
—
—
—
—
—
—
25DLOW
31DLOW
37DLOW
43DLOW
50DLOW
56DLOW
62DLOW
75DLOW
87DLOW
100DLOW
—
—
—
2DLOWZ
3DLOWZ
4DLOWZ
5DLOWZ
6DLOWZ
8DLOWZ
10DLOWZ
12DLOWZ
25DLOWZ
31DLOWZ
37DLOWZ
43DLOWZ
50DLOWZ
56DLOWZ
62DLOWZ
75DLOWZ
87DLOWZ
100DLOWZ
112DLOWZ
125DLOWZ
150DLOWZ
1000
1000
1000
1000
1000
100
100
100
100
100
100
100
50
50
25
20
15
10
5
5
5
Split Lock Washers
• Galvanized
Tools
Abrasives
Nominal ID
Part No.
Qty.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
25DLOWH
31DLOWH
37DLOWH
50DLOWH
62DLOWH
75DLOWH
87DLOWH
100DLOWH
100
100
100
50
25
25
15
10
Hi Collar Lock Washers
• For use with 1960 Series
Socket Head Cap Screws
• May also be used to shorten
Socket Head Screws or Shoulder Bolts
OnSite
Supply
Safety
Rentals
Nominal ID
Part No.
Qty.
#8
#10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
8NHCL
10NHCL
25NHCL
31NHCL
37NHCL
43NHCL
50NHCL
62NHCL
75NHCL
87NHCL
100NHCL
125NHCL
100
100
100
100
100
100
100
100
100
100
50
5
38
Hartford, CT
800-969-0285
Nominal ID
Part No.
Qty.
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
25DLOW8Y
31DLOW8Y
37DLOW8Y
43DLOW8Y
50DLOW8Y
56DLOW8Y
62DLOW8Y
75DLOW8Y
87DLOW8Y
100DLOW8Y
100
100
100
100
50
50
25
25
15
10
18-8 & 316 Stainless Steel
Split Lock Washers
Nominal
ID x OD
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
Part No.
18-8
8NLOWS
10NLOWS
25NLOWS
31NLOWS
38NLOWS
43NLOWS
50NLOWS
62NLOWS
75NLOWS
87NLOWS
100NLOWS
Part No.
316
Qty.
8NLOW3
10NLOW3
25NLOW3
31NLOW3
38NLOW3
43NLOW3
50NLOW3
62NLOW3
75NLOW3
87NLOW3
100NLOW3
100
100
100
100
100
100
100
100
100
100
100
Internal / External Tooth
Lock Washers
• Also referred to as "Star Lock
Washers"
• Combination and Countersunk style available upon
request
Nominal ID Internal
External
Qty.
#1
#2
#3
#4
#5
#6
#8
#10
#12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1NELWZ
2NELWZ
3NELWZ
4NELWZ
5NELWZ
6NELWZ
8NELWZ
10NELWZ
12NELWZ
25NELWZ
31NELWZ
37NELWZ
43NELWZ
50NELWZ
56NELWZ
62NELWZ
75NELWZ
87NELWZ
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
1000
500
250
100
100
Boston , MA
800-645-6155
1NILWZ
2NILWZ
3NILWZ
4NILWZ
5NILWZ
6NILWZ
8NILWZ
10NILWZ
12NILWZ
25NILWZ
31NILWZ
37NILWZ
43NILWZ
50NILWZ
56NILWZ
62NILWZ
75NILWZ
87NILWZ
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part No.
Zinc
Part No.
Stainless
Qty.
8 x 1/2
10 x 1/2
10 x 5/8
12 x 5/8
14 x 5/8
3/8 x 3/4
1/2 x 1
8N50BSW
10N50BSW
10N62BSW
12N62BSW
14N62BSW
37D75BSW
50D100BSW
—
10N50BSWS
10N62BSWS
12N62BSWS
14N62BSWS
37D75BSWS
50D100BSWS
100
100
100
100
100
100
100
F436 Structural Flat Washers
• For use with A325 Bolts
Nominal
ID
Part No.
Plain
Part No.
HD Galvanized
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
50DA3W
62DA3W
75DA3W
87DA3W
100DA3W
112DA3W
125DA3W
150DA3W
50DA3WH
62DA3WH
75DA3WH
87DA3WH
100DA3WH
112DA3WH
125DA3WH
150DA3WH
Qty.
1250
625
625
312
250
187
150
125
18-8 and 316 Stainless Steel
USS Flat Washers
Part No.
Qty.
#2
#4
#5
#6
#8
#10
#12
2NMSWZ
4NMSWZ
5NMSWZ
6NMSWZ
8NMSWZ
10NMSWZ
12NMSWZ
100
100
100
100
100
100
100
Fender Washers
• Zinc Plated Steel
Nominal ID
Part No.
Qty.
3/16 x 1
3/16 x 1-1/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
1/4 x 2
5/16 x 1-1/4
5/16 x 1-1/2
3/8 x 1-1/4
3/8 x 1-1/2
3/8 x 2
1/2 x 1-1/2
1/2 x 2
18D100FEWZ
18D125FEWZ
25D100FEWZ
25D125FEWZ
25D150FEWZ
25D200FEWZ
31D125FEWZ
31D150FEWZ
37D125FEWZ
37D150FEWZ
37D200FEWZ
50D150FEWZ
50D200FEWZ
100
100
100
100
100
100
100
100
100
100
100
100
100
Qty.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
25DFLWS
31DFLWS
37DFLWS
50DFLWS
62DFLWS
75DFLWS
87DFLWS
100DFLWS
112DFLWS
125DFLWS
150DFLWS
25DFLW3
31DFLW3
37DFLW3
50DFLW3
62DFLW3
75DFLW3
87DFLW3
100DFLW3
112DFLW3
125DFLW3
150DFLW3
100
100
100
100
25
20
15
10
10
10
10
Part
No.
Tie Rod For Use w/
Size
Pipe Size
75DSCW 3/4"–10
100DSCW 1"–9
112DSCW 1-1/8"–7
125DSCW 1-1/4"–7
137DSCW 1-3/8"–6
150DSCW 1-1/2"–6
4" – 8"
10" – 12"
14" – 16"
18"
20"
24"
(inches) Qty/
'D'
'E' 'F' lb.
7/8
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
3
1/2
3-1/2 1/2
3-1/2 5/8
3-1/2 3/4
3-1/2 3/4
3-1/2 3/4
119
159
181
229
223
217
Duc Lug
• Ductile Iron
• For 4" - 12" pipe
• 50/box
18-8 and 316 Stainless Steel
Fender Washers
OnSite
Supply
Part No.
316
Part No.
0UDUL/P
Part No.
18-8
Part No.
316
1/4 x 1-1/4
1/4 x 1-1/2
5/16 x 1-1/4
5/16 x 1-1/2
3/8 x 1-1/4
3/8 x 1-1/2
1/2 x 1-1/2
1/2 x 2
25D125FEWS
25D150FEWS
31D125FEWS
31D150FEWS
37D125FEWS
37D150FEWS
50D150FEWS
50D200FEWS
25D125FEW3
25D150FEW3
—
31D150FEW3
—
37D150FEW3
50D150FEW3
50D200FEW3
Washington D.C.
877-419-2755
Countersunk Finish Washers
• Nickel Plated Steel
Nominal ID
Part No.
Qty.
#6
#8
#10
#12
#14
6NCFWI
8NCFWI
10NCFWI
12NCFWI
14NCFWI
100
100
100
100
100
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Nominal
ID x OD
39
Rentals
Part No.
18-8
Abrasives
• Steel, plain or electro-plated finish
• For use with B3134 four-bolt
underground clamp to secure rods.
Tools
Socket Washer
Nominal
ID
Philadelphia, PA
610-647-8070
Strut
Nominal
ID x OD
Nominal ID
Threaded
Rod
• Zinc Plated Steel / Neoprene
• Stainless Steel / Neoprene
Anchors
Machine Screw Flat Washers
Pipe
Hangers
Bonded Sealing Washers
Fasteners
washers
Fasteners
Round combo machine screws
Round Combo Phillips / Slotted Head Machine Screws
• Zinc Plated Steel
Anchors
Length
Part No.
Qty.
2 - 56 Nominal Size and Threads
Length Part No.
Qty.
8 - 32 Nominal Size and Threads
Length Part No.
Qty.
12 - 24 Nominal Size and Threads
3/16
1/4
5/16
1/2
3
3-1/2
4
1-1/4
1-1/2
2
2-1/2
3
2C18RCMZ
2C25RCMZ
2C31RCMZ
2C50RCMZ
100
100
100
100
4 - 40 Nominal Size and Threads
Strut
Threaded
Rod
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
4C18RCMZ
4C25RCMZ
4C31RCMZ
4C37RCMZ
4C43RCMZ
4C50RCMZ
4C62RCMZ
4C75RCMZ
4C87RCMZ
4C100RCMZ
4C125RCMZ
4C150RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
6 - 32 Nominal Size and Threads
Pipe
Hangers
Tools
Abrasives
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
4
6C18RCMZ
6C25RCMZ
6C31RCMZ
6C37RCMZ
6C43RCMZ
6C50RCMZ
6C62RCMZ
6C75RCMZ
6C87RCMZ
6C100RCMZ
6C125RCMZ
6C150RCMZ
6C175RCMZ
6C200RCMZ
6C225RCMZ
6C250RCMZ
6C275RCMZ
6C300RCMZ
6C400RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
8 - 32 Nominal Size and Threads
OnSite
Supply
Safety
Rentals
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1-1/4
2-1/2
2-3/4
40
8C300RCMZ
8C350RCMZ
8C400RCMZ
100
100
100
10 - 24 Nominal Size and Threads
1/4
5/16
3/8
7/16
1/8
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
10C25RCMZ
10C31RCMZ
10C37RCMZ
10C41RCMZ
10C50RCMZ
10C62RCMZ
10C75RCMZ
10C87RCMZ
10C100RCMZ
10C125RCMZ
10C150RCMZ
10C175RCMZ
10C200RCMZ
10C225RCMZ
10C250RCMZ
10C275RCMZ
10C300RCMZ
10C350RCMZ
10C400RCMZ
10C450RCMZ
10C500RCMZ
10C550RCMZ
10C600RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10 - 32 Nominal Size and Threads
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
8C18RCMZ
8C25RCMZ
8C31RCMZ
8C37RCMZ
8C43RCMZ
8C50RCMZ
8C62RCMZ
8C75RCMZ
8C87RCMZ
8C100RCMZ
8C125RCMZ
8C150RCMZ
8C175RCMZ
8C200RCMZ
8C225RCMZ
8C250RCMZ
8C275RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Hartford, CT
800-969-0285
10F25RCMZ
10F31RCMZ
10F37RCMZ
10F43RCMZ
10F50RCMZ
10F62RCMZ
10F75RCMZ
10F87RCMZ
10F100RCMZ
10F125RCMZ
10F150RCMZ
10F175RCMZ
10F200RCMZ
10F225RCMZ
10F250RCMZ
10F275RCMZ
10F300RCMZ
10F350RCMZ
10F400RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
12 - 24 Nominal Size and Threads
5/16
3/8
1/2
5/8
3/4
7/8
1
12C31RCMZ
12C37RCMZ
10F50RCMZ
12C62RCMZ
12C75RCMZ
10F87RCMZ
12C100RCMZ
Boston , MA
800-645-6155
100
100
100
100
100
100
100
12C125RCMZ
12C150RCMZ
12C150RCMZ
12C250RCMZ
12C300RCMZ
100
100
100
100
100
1/4 - 20 Nominal Size and Threads
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
25C25RCMZ
25C31RCMZ
25C37RCMZ
25C43RCMZ
25C50RCMZ
25C62RCMZ
25C75RCMZ
25C87RCMZ
25C100RCMZ
25C125RCMZ
25C150RCMZ
25C175RCMZ
25C200RCMZ
25C225RCMZ
25C250RCMZ
25C275RCMZ
25C300RCMZ
25C350RCMZ
25C400RCMZ
25C450RCMZ
25C500RCMZ
25C550RCMZ
25C600RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
5/16 - 18 Nominal Size and Threads
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
31C50RCMZ
31C62RCMZ
31C75RCMZ
31C87RCMZ
31C100RCMZ
31C125RCMZ
31C150RCMZ
31C175RCMZ
31C200RCMZ
31C225RCMZ
31C250RCMZ
31C275RCMZ
31C300RCMZ
31C350RCMZ
31C400RCMZ
31C450RCMZ
31C500RCMZ
31C550RCMZ
31C600RCMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
3/8 - 16 Nominal Size and Threads
1/2
5/8
3/4
7/8
1
37C50RCMZ
37C62RCMZ
37C75RCMZ
37C87RCMZ
37C100RCMZ
Washington D.C.
877-419-2755
100
100
100
100
100
Philadelphia, PA
610-647-8070
Fasteners
Round combo machine screws
1/2 - 13 Nominal Size and Threads
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
4-1/2
5
6
50C100RCMZ
50C125RCMZ
50C150RCMZ
50C175RCMZ
50C200RCMZ
50C250RCMZ
50C300RCMZ
50C350RCMZ
50C400RCMZ
50C450RCMZ
50C500RCMZ
50C600RCMZ
100
100
100
100
100
100
100
100
100
100
50
50
6 - 32 Nominal Size and Threads
1/4
6C25TSMZ
100
5/16
6C31TSMZ
100
3/8
6C37TSMZ
100
1/2
6C50TSMZ
100
5/8
6C62TSMZ
100
3/4
6C75TSMZ
100
1
6C100TSMZ
100
1-1/2
6C150TSMZ
100
2
6C200TSMZ
100
3
6C300TSMZ
100
4
6C400TSMZ
100
8 - 32 Nominal Size and Threads
1/4
8C25TSMZ
100
5/16
8C31TSMZ
100
3/8
8C37TSMZ
100
1/2
8C50TSMZ
100
5/8
8C62TSMZ
100
3/4
8C75TSMZ
100
1
8C100TSMZ
100
1-1/4
8C125TSMZ
100
1-1/2
8C150TSMZ
100
10 - 24 Nominal Size and Threads
1/4
10C25TSMZ
100
5/16
10C31TSMZ
100
3/8
10C37TSMZ
100
1/2
10C50TSMZ
100
5/8
10C62TSMZ
100
3/4
10C75TSMZ
100
Length
Part No.
Qty.
10 - 24 Nominal Size and Threads
1
10C100TSMZ
100
1-1/4
10C125TSMZ
100
1-1/2
10C150TSMZ
100
2
10C200TSMZ
100
2-1/2
10C250TSMZ
100
10 - 32 Nominal Size and Threads
10F18TSMZ
100
3/16
1/4
10F25TSMZ
100
3/8
10F37TSMZ
100
1/2
10F50TSMZ
100
5/8
10F62TSMZ
100
3/4
10F75TSMZ
100
1
10F100TSMZ
100
1-1/4
10F125TSMZ
100
1-1/2
10F150TSMZ
100
1/4 - 20 Nominal Size and Threads
3/8
25C37TSMZ
100
1/2
25C50TSMZ
100
5/8
25C62TSMZ
100
3/4
25C75TSMZ
100
7/8
25C87TSMZ
100
1
25C100TSMZ
100
1-1/4
25C125TSMZ
100
1-1/2
25C150TSMZ
100
2
25C200TSMZ
100
2-1/2
25C250TSMZ
100
3
25C300TSMZ
100
4
25C400TSMZ
100
Strut
100
100
100
100
100
100
100
100
100
100
100
100
Qty.
Threaded
Rod
37C125RCMZ
37C150RCMZ
37C175RCMZ
37C200RCMZ
37C225RCMZ
37C250RCMZ
37C275RCMZ
37C300RCMZ
37C350RCMZ
37C400RCMZ
37C450RCMZ
37C500RCMZ
Part No.
Pipe
Hangers
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
Length
Tools
Length Part No.
Qty.
3/8 - 16 Nominal Size and Threads
Abrasives
Round Combo
Phillips/Slotted Head
Machine Screws - Cont.
Anchors
Slotted Truss Head Machine Screws
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
41
Rentals
Safety
OnSite
Supply
Refer to Anchors Section for more information.
Anchors Section starts on page 65.
Fasteners
machine screws
Pan Slotted Machine Screws
• Zinc Plated Steel
Anchors
Length
Part No.
Qty.
2 - 56 Nominal Size and Threads
Length Part No.
Qty.
6 - 32 Nominal Size and Threads
Length Part No.
Qty.
10 - 24 Nominal Size and Threads
3/16
1/2
3/4
1-3/4
2
1-1/4
1-1/2
2
2C18PSMZ
2C50PSMZ
2C75PSMZ
100
100
100
4 - 40 Nominal Size and Threads
Strut
Threaded
Rod
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/2
4C18PSMZ
4C25PSMZ
4C31PSMZ
4C37PSMZ
4C50PSMZ
4C62PSMZ
4C75PSMZ
4C87PSMZ
4C100PSMZ
4C150PSMZ
100
100
100
100
100
100
100
100
100
100
6 - 32 Nominal Size and Threads
Pipe
Hangers
Tools
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
6C18PSMZ
6C25PSMZ
6C31PSMZ
6C37PSMZ
6C50PSMZ
6C62PSMZ
6C75PSMZ
6C87PSMZ
6C100PSMZ
6C125PSMZ
6C150PSMZ
100
100
100
100
100
100
100
100
100
100
100
6C175PSMZ
6C200PSMZ
100
100
8 - 32 Nominal Size and Threads
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
8C18PSMZ
8C25PSMZ
8C31PSMZ
8C37PSMZ
8C40PSMZ
8C62PSMZ
8C75PSMZ
8C87PSMZ
8C100PSMZ
8C125PSMZ
8C150PSMZ
8C175PSMZ
8C200PSMZ
8C250PSMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10 - 24 Nominal Size and Threads
Abrasives
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
10C25PSMZ
10C31PSMZ
10C37PSMZ
10C50PSMZ
10C62PSMZ
10C75PSMZ
10C87PSMZ
10C100PSMZ
Length
Part No.
100
100
100
100
100
100
100
100
10C125PSMZ
10C150PSMZ
10C200PSMZ
100
100
100
10 - 32 Nominal Size and Threads
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
10F25PSMZ
10F31PSMZ
10F37PSMZ
10F50PSMZ
10F62PSMZ
10F75PSMZ
10F87PSMZ
10F100PSMZ
10F125PSMZ
10F150PSMZ
10F200PSMZ
100
100
100
100
100
100
100
100
100
100
100
1/4 - 20 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
2-1/2
25C37PSMZ
25C50PSMZ
25C62PSMZ
25C75PSMZ
25C87PSMZ
25C100PSMZ
25C125PSMZ
25C150PSMZ
25C200PSMZ
25C250PSMZ
Length
Part No.
100
100
100
100
100
100
100
100
100
100
Pan Phillips Machine Screws
• Zinc Plated Steel
Length
Part No.
Qty.
OnSite
Supply
Safety
8 - 32 Nominal Size and Threads
7/16
8C43PPMZ
100
1/2
8C50PPMZ
100
5/8
8C62PPMZ
100
3/4
8C75PPMZ
100
7/8
8C87PPMZ
100
1
8C100PPMZ
100
1-1/2
8C150PPMZ
100
10 - 24 Nominal Size and Threads
1/4
10C25PPMZ
100
5/16
10C31PPMZ
100
3/8
10C37PPMZ
100
7/16
10C43PPMZ
100
1/2
10C50PPMZ
100
5/8
10C62PPMZ
100
Rentals
42
Qty.
10 - 24 Nominal Size and Threads
3/4
10C75PPMZ
100
1
10C100PPMZ
100
1-1/4
10C125PPMZ
100
1-1/2
10C150PPMZ
100
1-3/4
10C175PPMZ
100
2
10C200PPMZ
100
10 - 32 Nominal Size and Threads
1/4
10F25PPMZ
100
5/16
10F31PPMZ
100
7/16
10F43PPMZ
100
1/2
10F50PPMZ
100
5/8
10F62PPMZ
100
3/4
10F75PPMZ
100
1
10F100PPMZ
100
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Qty.
10 - 32 Nominal Size and Threads
10F125PPMZ
100
1-1/4
1-1/2
10F150PPMZ
100
2
10F200PPMZ
100
1/4 - 20 Nominal Size and Threads
3/8
25C37PPMZ
100
1/2
25C50PPMZ
100
5/8
25C62PPMZ
100
3/4
25C75PPMZ
100
7/8
25C87PPMZ
100
1
25C100PPMZ
100
1-1/4
25C125PPMZ
100
1-1/2
25C150PPMZ
100
1-3/4
25C175PPMZ
100
2
25C200PPMZ
100
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Length Part No.
Qty.
4 - 40 Nominal Size and Threads
Length Part No.
Qty.
10 - 24 Nominal Size and Threads
Length Part No.
Qty.
1/4 - 20 Nominal Size and Threads
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
4
4-1/2
5
6
2-3/4
3
3-1/2
4
4-1/2
5
6
6C18FSMZ
6C25FSMZ
6C31FSMZ
6C37FSMZ
6C50FSMZ
6C62FSMZ
6C75FSMZ
6C100FSMZ
6C125FSMZ
6C150FSMZ
6C175FSMZ
6C200FSMZ
6C225FSMZ
6C250FSMZ
6C300FSMZ
6C400FSMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
8 - 32 Nominal Size and Threads
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
4
8C18FSMZ
8C25FSMZ
8C31FSMZ
8C37FSMZ
8C50FSMZ
8C62FSMZ
8C75FSMZ
8C87FSMZ
8C100FSMZ
8C125FSMZ
8C150FSMZ
8C175FSMZ
8C200FSMZ
8C225FSMZ
8C250FSMZ
8C275FSMZ
8C300FSMZ
8C400FSMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10 - 24 Nominal Size and Threads
1/4
5/16
3/8
10C25FSMZ
10C31FSMZ
10C37FSMZ
Philadelphia, PA
610-647-8070
100
100
100
10F25FSMZ
10F31FSMZ
10F37FSMZ
10F50FSMZ
10F62FSMZ
10F75FSMZ
10F87FSMZ
10F100FSMZ
10F125FSMZ
10F150FSMZ
10F175FSMZ
10F200FSMZ
10F225FSMZ
10F250FSMZ
10F300FSMZ
10F400FSMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
12C37FSMZ
12C50FSMZ
12C62FSMZ
12C75FSMZ
12C87FSMZ
12C100FSMZ
12C135FSMZ
12C150FSMZ
12C175FSMZ
12C200FSMZ
12C250FSMZ
12C300FSMZ
100
100
100
100
100
100
100
100
100
100
100
100
Washington D.C.
877-419-2755
25C37FSMZ
25C50FSMZ
25C62FSMZ
25C75FSMZ
25C87FSMZ
25C100FSMZ
25C125FSMZ
25C150FSMZ
25C175FSMZ
25C200FSMZ
25C225FSMZ
25C250FSMZ
Boston , MA
800-645-6155
100
100
100
100
100
100
100
100
100
100
100
100
Threaded
Rod
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
6
37C50FSMZ
37C62FSMZ
37C75FSMZ
37C87FSMZ
37C100FSMZ
37C125FSMZ
37C150FSMZ
37C175FSMZ
37C200FSMZ
37C225FSMZ
37C250FSMZ
37C275FSMZ
37C300FSMZ
37C350FSMZ
37C400FSMZ
37C450FSMZ
37C500FSMZ
37C600FSMZ
100
100
100
100
100
100
100
100
100
50
50
100
50
50
100
50
50
50
1/2 - 13 Nominal Size and Threads
1/4 - 20 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
31C50FSMZ
31C62FSMZ
31C75FSMZ
31C87FSMZ
31C100FSMZ
31C125FSMZ
31C150FSMZ
31C175FSMZ
31C200FSMZ
31C225FSMZ
31C250FSMZ
31C275FSMZ
31C300FSMZ
31C350FSMZ
31C400FSMZ
31C450FSMZ
31C500FSMZ
31C600FSMZ
3/8 - 16 Nominal Size and Threads
12 - 24 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
6
Pipe
Hangers
6 - 32 Nominal Size and Threads
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
4
5/16 - 18 Nominal Size and Threads
10 - 32 Nominal Size and Threads
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
4
100
100
100
100
100
100
100
Tools
100
100
100
100
100
100
100
100
100
100
25C275FSMZ
25C300FSMZ
25C350FSMZ
25C400FSMZ
25C450FSMZ
25C500FSMZ
25C600FSMZ
Abrasives
5C25FSMZ
5C31FSMZ
5C37FSMZ
5C50FSMZ
5C62FSMZ
5C75FSMZ
5C87FSMZ
5C100FSMZ
5C150FSMZ
5C200FSMZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/2
4
4-1/2
5
6
50C100FSMZ
50C125FSMZ
50C150FSMZ
50C175FSMZ
50C200FSMZ
50C225FSMZ
50C250FSMZ
50C300FSMZ
50C350FSMZ
50C400FSMZ
50C450FSMZ
50C500FSMZ
50C600FSMZ
Hartford, CT
800-969-0285
50
50
50
50
50
50
50
25
50
25
25
50
25
OnSite
Supply
5 - 40 Nominal Size and Threads
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/2
2
10C50FSMZ
10C62FSMZ
10C75FSMZ
10C87FSMZ
10C100FSMZ
10C125FSMZ
10C150FSMZ
10C175FSMZ
10C200FSMZ
10C225FSMZ
10C250FSMZ
10C275FSMZ
10C300FSMZ
10C400FSMZ
10C450FSMZ
10C500FSMZ
10C600FSMZ
Safety
100
100
100
100
100
100
100
100
100
43
Rentals
4C25FSMZ
4C31FSMZ
4C37FSMZ
4C50FSMZ
4C62FSMZ
4C75FSMZ
4C100FSMZ
4C125FSMZ
4C150FSMZ
Fasteners
• Zinc Plated Steel
Anchors
Flat Slotted Machine Screws
Strut
machine screws
Fasteners
machine screws
Flat Phillips Machine Screws
• Zinc Plated Steel
Anchors
Strut
Length Part No.
Qty.
4 - 40 Nominal Size and Threads
Length Part No.
Qty.
8 - 32 Nominal Size and Threads
Length Part No.
Qty.
10 - 32 Nominal Size and Threads
1/4
5/16
3/8
1/2
3/4
1/2
3/4
1
1-1/4
1-1/2
2
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
4C25FPMZ
4C31FPMZ
4C37FPMZ
4C50FPMZ
4C75FPMZ
100
100
100
100
100
6 - 32 Nominal Size and Threads
Threaded
Rod
1/4
5/16
3/8
1/2
1
1-1/4
6C25FPMZ
6C31FPMZ
6C37FPMZ
6C50FPMZ
6C100FPMZ
6C125FPMZ
100
100
100
100
100
100
8 - 32 Nominal Size and Threads
1/4
5/16
3/8
8C25FPMZ
8C31FPMZ
8C37FPMZ
100
100
100
8C50FPMZ
8C75FPMZ
8C100FPMZ
8C125FPMZ
8C150FPMZ
8C20FPMZ
100
100
100
100
100
100
10 - 24 Nominal Size and Threads
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
10C31FPMZ
10C37FPMZ
10C50FPMZ
10C62FPMZ
10C75FPMZ
10C100FPMZ
10C125FPMZ
10C150FPMZ
10C200FPMZ
100
100
100
100
100
100
100
100
100
10F31FPMZ
10F37FPMZ
10F50FPMZ
10F62FPMZ
10F75FPMZ
10F100FPMZ
10F125FPMZ
10F150FPMZ
10F200FPMZ
100
100
100
100
100
100
100
100
100
1/4 - 20 Nominal Size and Threads
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
25C37FPMZ
25C50FPMZ
25C62FPMZ
25C75FPMZ
25C100FPMZ
25C125FPMZ
25C150FPMZ
25C200FPMZ
100
100
100
100
100
100
100
100
Pipe
Hangers
Fillister Head Screws
• More material in the head of the
fastener for strength.
• Zinc Plated Steel
Tools
Abrasives
Qty.
Length Part No.
4 - 40 Nominal Size and Threads
Length Part No.
Qty.
8 - 32 Nominal Size and Threads
Length Part No.
Qty.
10 - 32 Nominal Size and Threads
1/4
3/8
1/2
5/8
3/4
1
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
4C25FIMZ
4C37FIMZ
4C50FIMZ
4C62FIMZ
4C75FIMZ
44C100FIMZ
100
100
100
100
100
100
6 - 32 Nominal Size and Threads
OnSite
Supply
1/4
3/8
1/2
5/8
3/4
1
1-1/2
2
6C25FIMZ
6C37FIMZ
6C50FIMZ
6C62FIMZ
6C75FIMZ
6C100FIMZ
6C150FIMZ
6C200FIMZ
100
100
100
100
100
100
100
100
8C25FIMZ
8C37FIMZ
8C50FIMZ
8C62FIMZ
8C75FIMZ
8C100FIMZ
8C125FIMZ
8C150FIMZ
8C200FIMZ
100
100
100
100
100
100
100
100
100
10 - 24 Nominal Size and Threads
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
10C37FIMZ
10C50FIMZ
10C62FIMZ
10C75FIMZ
10C100FIMZ
10C125FIMZ
10C150FIMZ
100
100
100
100
100
100
100
10F25FIMZ
10F37FIMZ
10F50FIMZ
10F62FIMZ
10F75FIMZ
10F100FIMZ
10F125FIMZ
10F150FIMZ
10F200FIMZ
100
100
100
100
100
100
100
100
100
1/4 - 20 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
25C37FIMZ
25C50FIMZ
25C62FIMZ
25C75FIMZ
25C87FIMZ
25C100FIMZ
25C125FIMZ
25C150FIMZ
100
100
100
100
100
100
100
100
Safety
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
Rentals
44
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
18-8 Stainless Steel Machine Screws
6 - 32 Nominal Size and Threads
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2-1/4
2-1/2
3
6C25FSMS
6C31FSMS
6C37FSMS
6C50FSMS
6C62FSMS
6C75FSMS
6C87FSMS
6C100FSMS
6C125FSMS
6C150FSMS
6C175FSMS
6C200FSMS
6C250FSMS
6C300FSMS
6C25FPMS
6C31FPMS
6C37FPMS
6C50FPMS
6C62FPMS
6C75FPMS
6C87FPMS
6C100FPMS
6C125FPMS
6C150FPMS
—
—
—
—
6C25PSMS
6C31PSMS
6C37PSMS
6C50PSMS
6C62PSMS
6C75PSMS
6C87PSMS
6C100PSMS
6C125PSMS
6C150PSMS
6C175PSMS
6C200PSMS
—
—
—
—
—
6C50RPMS
—
—
—
6C100RPMS
—
—
—
6C200RPMS
—
—
8 - 32 Nominal Size and Threads
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
8C31FSMS
8C37FSMS
8C50FSMS
8C62FSMS
8C75FSMS
8C87FSMS
8C100FSMS
8C125FSMS
8C150FSMS
8C175FSMS
8C200FSMS
8C250FSMS
8C300FSMS
8C31FPMS
8C37FPMS
8C50FPMS
8C62FPMS
8C75FPMS
8C87FPMS
8C100FPMS
8C125FPMS
8C150FPMS
—
8C200FPMS
—
—
8C31PSMS
8C37PSMS
8C50PSMS
8C62PSMS
8C75PSMS
8C87PSMS
8C100PSMS
8C125PSMS
8C150PSMS
8C175PSMS
8C200PSMS
—
—
—
—
8C50RPMS
—
8C75RPMS
—
8C100RPMS
—
8C150RPMS
—
—
—
—
10 - 24 Nominal Size and Threads
3/8
1/2
5/8
3/4
10C37FSMS
10C50FSMS
10C62FSMS
10C75FSMS
10C37FPMS
10C50FPMS
10C62FPMS
10C75FPMS
10C37PSMS
10C50PSMS
10C62PSMS
10C75PSMS
—
10C50RPMS
—
10C75RPMS
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
6C25PPMS
6C31PPMS
6C37PPMS
6C50PPMS
6C62PPMS
6C75PPMS
6C87PPMS
6C100PPMS
6C125PPMS
6C150PPMS
6C175PPMS
—
—
—
8C31PPMS
8C37PPMS
8C50PPMS
8C62PPMS
8C75PPMS
8C87PPMS
8C100PPMS
8C125PPMS
8C150PPMS
8C175PPMS
8C200PPMS
—
—
10C37PPMS
10C50PPMS
10C62PPMS
10C75PPMS
Boston , MA
800-645-6155
4C25RSMS
4C31RSMS
4C37RSMS
4C50RSMS
4C62RSMS
4C75RSMS
4C87RSMS
4C100RSMS
4C125RSMS
4C150RSMS
—
4C200RSMS
6C25RSMS
6C31RSMS
6C37RSMS
6C50RSMS
6C62RSMS
6C75RSMS
6C87RSMS
6C100RSMS
6C125RSMS
6C150RSMS
6C17RSMS
6C200RSMS
—
6C300RSMS
8C31RSMS
8C37RSMS
8C50RSMS
8C62RSMS
8C75RSMS
8C87RSMS
8C100RSMS
8C125RSMS
8C150RSMS
8C175RSMS
8C200RSMS
8C250RSMS
8C300RSMS
10C37RSMS
10C50RSMS
10C62RSMS
10C75RSMS
Hartford, CT
800-969-0285
—
—
—
—
—
—
—
—
—
—
—
—
Strut
4C25PSMS
4C31PSMS
4C37PSMS
4C50PSMS
4C62PSMS
4C75PSMS
4C87PSMS
4C100PSMS
4C125PSMS
4C150PSMS
4C175PSMS
4C200PSMS
100
100
100
100
100
100
100
100
100
100
100
100
Threaded
Rod
4C25FPMS
4C31FPMS
4C37FPMS
4C50FPMS
4C62FPMS
4C75FPMS
—
4C100FPMS
4C125FPMS
4C150FPMS
—
—
Pipe
Hangers
—
—
—
—
—
4C75FSMS
—
—
—
—
—
—
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Tools
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
4C25PPMS
4C31PPMS
4C37PPMS
4C50PPMS
4C62PPMS
4C75PPMS
4C87PPMS
4C100PPMS
4C125PPMS
4C150PPMS
—
—
Round Phillips Qty.
Abrasives
Pan Slotted
Pan Phillips
Round Slotted
4 - 40 Nominal Size and Threads
100
100
100
100
100
100
100
100
100
100
100
100
100
OnSite
Supply
Flat Phillips
Safety
Flat Slotted
100
100
100
100
45
Rentals
Length
Anchors
18-8 is 300 series stainless steel having approximately
(not exactly) 18% chromium and 8% nickel. The term
18-8 is used interchangeably to characterize fasteners
made of 302, 302HQ, 303, 304, 305, 384, XM7, and other
variables of these grades with close chemical compositions.
Products listed are conveniently packaged. If you need bulk
shipments or special packaging configurations, call your
NEFCO representative.
Fasteners
stainless steel machine screws
Fasteners
stainless steel machine screws
18-8 Stainless Steel Machine Screws - Continued
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Length Flat Slotted
Flat Phillips
Pan Slotted
Pan Phillips
Round Slotted
10 - 24 Nominal Size and Threads
Round Phillips Qty.
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
10C87FSMS
10C100FSMS
10C125FSMS
10C150FSMS
10C175FSMS
10C200FSMS
10C250FSMS
10C300FSMS
—
10C100FPMS
10C125FPMS
10C150FPMS
—
10C200FPMS
—
—
10C87PSMS
10C100PSMS
10C125PSMS
10C150PSMS
10C175PSMS
10C200PSMS
10C250PSMS
10C300PSMS
—
10C100RPMS
—
10C150RPMS
—
10C200RPMS
—
—
10 - 32 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
2-1/2
3
10F37FSMS
10F50FSMS
10F62FSMS
10F75FSMS
—
10F100FSMS
10F125FSMS
10F150FSMS
10F200FSMS
—
—
10F37FPMS
10F50FPMS
10F62FPMS
10F75FPMS
10F87FPMS
10F100FPMS
10F125FPMS
10F150FPMS
10F200FPMS
—
—
10F37PSMS
10F50PSMS
10F62PSMS
10F75PSMS
10F87PSMS
10F100PSMS
10F125PSMS
10F150PSMS
10F200PSMS
10F250PSMS
10F300PSMS
1/4 - 20 Nominal Size and Threads
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
25C37FSMS
25C50FSMS
25C62FSMS
25C75FSMS
25C87FSMS
25C100FSMS
25C125FSMS
25C150FSMS
25C175FSMS
25C200FSMS
25C250FSMS
25C300FSMS
—
25C50FPMS
25C62FPMS
25C75FPMS
—
25C100FPMS
25C125FPMS
25C150FPMS
—
25C200FPMS
—
—
—
25C50PSMS
25C62PSMS
25C75PSMS
25C87PSMS
25C100PSMS
25C125PSMS
25C150PSMS
25C175PSMS
25C200PSMS
25C250PSMS
25C300PSMS
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
—
31C75FSMS
31C100FSMS
31C125FSMS
31C150FSMS
31C175FSMS
31C200FSMS
31C250FSMS
31C300FSMS
Safety
Rentals
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
46
37C75FSMS
37C100FSMS
37C125FSMS
37C150FSMS
37C175FSMS
37C200FSMS
37C250FSMS
37C300FSMS
10C87PPMS
10C100PPMS
10C125PPMS
10C150PPMS
—
10C200PPMS
—
—
10F37PPMS
10F50PPMS
10F62PPMS
10F75PPMS
10F87PPMS
10F100PPMS
10F125PPMS
10F150PPMS
10F200PPMS
—
—
—
25C50PPMS
25C62PPMS
25C75PPMS
25C87PPMS
25C100PPMS
25C125PPMS
25C150PPMS
25C175PPMS
25C200PPMS
—
—
10C87RSMS
10C100RSMS
10C125RSMS
10C150RSMS
10C175RSMS
10C200RSMS
10C250RSMS*
10C300RSMS*
10F37RSMS
10F50RSMS
10F62RSMS
10F75RSMS
10F87RSMS
10F100RSMS
10F125RSMS
10F100RSMS
10F200RSMS
—
10F300RSMS
—
25C50RSMS
25C62RSMS
25C75RSMS
25C87RSMS
25C100RSMS
25C125RSMS
25C150RSMS
25C175RSMS
25C200RSMS
25C250RSMS
25C300RSMS
—
—
—
—
—
—
—
—
—
—
—
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
—
—
—
—
—
—
—
—
—
—
—
—
100
100
100
100
100
100
100
100
100
100
100
100
—
—
—
—
—
—
—
—
—
100
100
100
100
100
100
100
100
100
5/16 - 18 Nominal Size and Threads
—
—
—
—
—
—
—
—
—
31C50PSMS
31C75PSMS
31C100PSMS
31C125PSMS
31C150PSMS
—
31C200PSMS
—
—
—
—
—
—
—
—
—
—
—
3/8 - 16 Nominal Size and Threads
—
—
—
—
—
—
—
—
Hartford, CT
800-969-0285
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Boston , MA
800-645-6155
—
31C75RSMS
31C100RSMS
31C125RSMS
31C150RSMS
31C175RSMS
31C200RSMS
31C250RSMS
31C300RSMS
37C75RSMS
37C100RSMS
37C125RSMS
—
—
37C200RSMS
37C250RSMS
37C300RSMS
Washington D.C.
877-419-2755
—
—
—
—
—
—
—
—
100
100
100
100
100
50
50
50
Philadelphia, PA
610-647-8070
Pan Phillips / Slot Combo Type A Sheet Metal Screws
Part No.
#4
Qty.
Length
Part No.
#8
Qty.
Length
Part No.
#12
Qty.
1/4
1/2
3/4
1
4N25PCSZ
4N50PCSZ
4N75PCSZ
4N100PCSZ
100
100
100
100
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
8N37PCSZ
8N50PCSZ
8N62PCSZ
8N75PCSZ
8N100PCSZ
8N125PCSZ
8N150PCSZ
8N175PCSZ
8N200PCSZ
100
100
100
100
100
100
100
100
100
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
12N75PCSZ
12N100PCSZ
12N125PCSZ
12N150PCSZ
12N175PCSZ
12N200PCSZ
12N250PCSZ
12N300PCSZ
100
100
100
100
100
100
100
100
6N37PCSZ
6N50PCSZ
6N62PCSZ
6N75PCSZ
6N100PCSZ
6N125PCSZ
6N150PCSZ
100
100
100
100
100
100
100
#7
3/8
1/2
5/8
3/4
1
7N37PCSZ
7N50PCSZ
7N62PCSZ
7N75PCSZ
7N100PCSZ
100
100
100
100
100
#10
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
10N37PCSZ
10N50PCSZ
10N62PCSZ
10N75PCSZ
10N100PCSZ
10N125PCSZ
10N150PCSZ
10N175PCSZ
10N200PCSZ
10N250PCSZ
10N300PCSZ
#14
100
100
100
100
100
100
100
100
100
100
100
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
14N75PCSZ
14N100PCSZ
14N125PCSZ
14N150PCSZ
14N175PCSZ
14N200PCSZ
14N250PCSZ
14N300PCSZ
100
100
100
100
100
100
100
100
Threaded
Rod
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
Pan Phillips Sheet Metal Screws
Pipe
Hangers
#6
Strut
Length
Anchors
• Zinc Plated Steel
Fasteners
Sheet metal Screws
Part No.
#4
Qty.
Length
Part No.
#8
Qty.
Length
Part No.
#12
Qty.
1/4
3/8
1/2
5/8
3/4
1
4N25PPSZ
4N37PPSZ
4N50PPSZ
4N62PPSZ
4N75PPSZ
4N100PPSZ
100
100
100
100
100
100
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
8N25PPSZ
8N37PPSZ
8N50PPSZ
8N62PPSZ
8N75PPSZ
8N87PPSZ
8N100PPSZ
8N125PPSZ
8N150PPSZ
8N275PPSZ
8N200PPSZ
8N250PPSZ
8N300PPSZ
100
100
100
100
100
100
100
100
100
100
100
100
100
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
200
2-1/2
3
12N50PPSZ
12N62PPSZ
12N75PPSZ
12N87PPSZ
12N100PPSZ
12N125PPSZ
12N150PPSZ
12N175PPSZ
12N200PPSZ
12N250PPSZ
12N300PPSZ
100
100
100
100
100
100
100
100
100
100
100
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
14N50PPSZ
14N62PPSZ
14N75PPSZ
14N87PPSZ
14N100PPSZ
14N175PPSZ
14N150PPSZ
14N175PPSZ
14N200PPSZ
14N250PPSZ
14N300PPSZ
100
100
100
100
100
100
100
100
100
100
100
#7
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
7N37PPSZ
7N50PPSZ
7N62PPSZ
7N75PPSZ
7N100PPSZ
7N125PPSZ
7N150PPSZ
Philadelphia, PA
610-647-8070
100
100
100
100
100
100
100
#10
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Washington D.C.
877-419-2755
10N37PPSZ
10N50PPSZ
10N62PPSZ
10N75PPSZ
10N87PPSZ
10N100PPSZ
10N125PPSZ
10N150PPSZ
10N175PPSZ
10N200PPSZ
10N250PPSZ
10N300PPSZ
Boston , MA
800-645-6155
100
100
100
100
100
100
100
100
100
100
100
100
#14
Hartford, CT
800-969-0285
100
100
100
100
100
100
100
100
100
100
100
OnSite
Supply
6N25PPSZ
6N37PPSZ
6N50PPSZ
6N52PPSZ
6N75PPSZ
6N87PPSZ
6N100PPSZ
6N125PPSZ
6N150PPSZ
6N175PPSZ
6N200PPSZ
Safety
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
47
Rentals
#6
Abrasives
Length
Tools
• Zinc Plated Steel
Fasteners
Sheet metal screws / hex
Anchors
Flat Phillips
Sheet Metal
Screws
Slotted Hex
Washer Sheet
Metal Screws
• Zinc Plated Steel
• Zinc Plated Steel
Strut
Threaded
Rod
Length Part No.
#6
Qty.
Length Part No.
#6
Qty.
Length Part No.
#10
Qty.
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
100
100
100
100
100
100
100
100
100
100
3/8
1/2
5/8
3/4
1
6N37HWSZ
6N50HWSZ
6N62HWSZ
6N75HWSZ
6N100HWSZ
100
100
100
100
100
2-1/2
3
100
100
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
8N37HWSZ
8N50HWSZ
8N62HWSZ
8N75HWSZ
8N100HWSZ
8N125HWSZ
8N150HWSZ
8N200HWSZ
6N25FPSZ
6N37FPSZ
6N50FPSZ
6N62FPSZ
6N75FPSZ
6N100FPSZ
6N125FPSZ
6N150FPSZ
6N175FPSZ
6N200FPSZ
#8
Pipe
Hangers
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
8N37FPSZ
8N50FPSZ
8N62FPSZ
8N75FPSZ
8N100FPSZ
8N125FPSZ
8N150FPSZ
8N175FPSZ
8N200FPSZ
8N250FPSZ
8N300FPSZ
100
100
100
100
100
100
100
100
100
100
100
#10
Tools
Abrasives
OnSite
Supply
Safety
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
10N37FPSZ
10N50FPSZ
10N62FPSZ
10N75FPSZ
10N100FPSZ
10N125FPSZ
10N150FPSZ
10N175FPSZ
10N200FPSZ
10N250FPSZ
10N300FPSZ
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
12N50FPSZ
12N62FPSZ
12N75FPSZ
12N100FPSZ
12N125FPSZ
12N250FPSZ
12N175FPSZ
12N200FPSZ
12N250FPSZ
12N300FPSZ
#14
100
100
100
100
100
100
100
100
100
100
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
14N75FPSZ
14N100FPSZ
14N125FPSZ
14N150FPSZ
14N175FPSZ
14N200FPSZ
14N250FPSZ
14N300FPSZ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
#12
Rentals
48
#12
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
#8
100
100
100
100
100
100
100
100
10N37HWSZ
10N50HWSZ
10N62HWSZ
10N75HWSZ
10N100HWSZ
10N125HWSZ
10N150HWSZ
10N200HWSZ
12N50HWSZ
12N62HWSZ
12N75HWSZ
12N100HWSZ
12N125HWSZ
12N150HWSZ
12N200HWSZ
12N250HWSZ
12N300HWSZ
100
100
100
100
100
100
100
100
100
#14
#10
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
10N250HWSZ
10N300HWSZ
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
100
100
100
100
100
100
100
100
14N50HWSZ
14N75HWSZ
14N100HWSZ
14N125HWSZ
14N150HWSZ
14N175HWSZ
14N200HWSZ
14N250HWSZ
14N300HWSZ
100
100
100
100
100
100
100
100
100
Plastic Anchors Kits
• Light duty, multi-size anchor for use
in concrete, block, tile and brick
• Moisture and chemical resistant, for
indoor/outdoor use
• Use with sheet metal, wood and lag
screws.
• Has collar for hollow materials
• Made in U.S.A
Hartford, CT
800-969-0285
Kit No.
Anchor Size
Screw Size
6K PAK
8K PAK
10K PAK
14K PAK
No.
No.
No.
No.
6 x 1
8 x 1
10 x 1-1/2
14 x 2
6-8
8-10
10-12
14-16
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Oval Slotted
Pan Slotted
1/4
4 x 3/8
4 x 1/2
5/8
4 x 3/4
1
6
1/4
6 x 3/8
6 x 1/2
6 x 5/8
6 x 3/4
6 x 1
6 x 1-1/4
6 x 1-1/2
2
—
4N37FSSS
4N50FSSS
—
4N75FSSS
—
—
—
6N37FSSS
6N50FSSS
6N62FSSS
6N75FSSS
6N100FSSS
6N125FSSS
6N150FSSS
—
—
4N37OSSS
4N50OSSS
—
4N75OSSS
—
—
—
6N37OSSS
6N50OSSS
6N62OSSS
6N75OSSS
6N100OSSS
6N125OSSS
6N150OSSS
—
4N25PSSS
4N37PSSS
4N50PSSS
4N62PSSS
4N75PSSS
—
—
6N25PSSS
6N37PSSS
6N50PSSS
6N62PSSS
6N75PSSS
6N100PSSS
6N125PSSS
6N150PSSS
6N200PSSS
Flat Phillips
#4
—
4N37FPSS
4N50FPSS
4N62FPSS
4N75FPSS
—
—
—
6N37FPSS
6N50FPSS
6N62FPSS
6N75FPSS
6N100FPSS
6N125FPSS
6N150FPSS
—
Oval Phillips
Pan Phillips
Qty.
—
4N37OPSS
4N50OPSS
4N62OPSS
—
4N100OPSS
—
—
—
6N50OPSS
—
6N75OPSS
6N100OPSS
6N125OPSS
6N150OPSS
—
4N25PPSS
4N37PPSS
4N50PPSS
4N62PPSS
4N75PPSS
—
—
4N25PPSS
6N37PPSS
6N50PPSS
6N62PPSS
6N75PPSS
6N100PPSS
6N125PPSS
6N150PPSS
—
100
100
100
100
100
100
—
—
8N50OPSS
—
8N75OPSS
8N100OPSS
8N125OPSS
8N150OPSS
8N175OPSS
8N200OPSS
8N250OPSS
8N300OPSS
—
8N37PPSS
8N50PPSS
8N62PPSS
8N75PPSS
8N100PPSS
8N125PPSS
8N150PPSS
—
8N200PPSS
—
—
100
100
100
100
100
100
100
100
100
100
100
100
—
10N50OPSS
—
10N75OPSS
10N100OPSS
10N125OPSS
10N150OPSS
10N175OPSS
10N200OPSS
10N250OPSS
10N300OPSS
10N37PPSS
10N50PPSS
10N62PPSS
10N75PPSS
10N100PPSS
10N125PPSS
10N150PPSS
—
10N200PPSS
10N250PPSS
10N300PPSS
100
100
100
100
100
100
100
100
100
100
100
—
—
12N75OPSS
12N125OPSS
12N150OPSS
12N200OPSS
12N250OPSS
12N300OPSS
12N50PPSS
—
12N75PPSS
12N125PPSS
12N150PPSS
12N200PPSS
—
—
100
100
100
100
100
100
100
100
—
—
—
14N100OPSS
14N125OPSS
14N150OPSS
14N200OPSS*
14N250OPSS
14N300OPSS
14N50PPSS 100
—
100
14N75PPSS 100
14N100PPSS 100
14N125PPSS 100
14N150PPSS* 100
14N200PPSS* 100
—
100
—
100
Strut
Flat Slotted
100
100
100
100
100
100
100
100
100
Threaded
Rod
Length
Anchors
Stainless Steel Sheet Metal Screws
—
8N37FSS
8N50FSSS
8N62FSSS
8N75FSSS
8N100FSSS
8N125FSSS
8N150FSSS
—
8N200FSSS
—
—
—
—
8N50OSSS
8N62OSSS
8N75OSSS
8N100OSSS
8N125OSSS
8N150OSSS
—
8N200OSSS
—
—
8N25PSSS
8N37PSSS
8N50PSSS
8N62PSSS
8N75PSSS
8N100PSSS
8N125PSSS
8N150PSSS
8N175PSSS
8N200PSSS
—
—
—
—
8N50FPSS
8N62FPSS
—
8N100FPSS
8N125FPSS
8N150FPSS
8N175FPSS
8N200FPSS
—
—
Pipe
Hangers
#8
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Fasteners
stainless steel Sheet metal Screws
—
10N50FSSS
10N62FSSS
10N75FSSS
10N100FSSS
10N125FSSS
10N150FSSS
10N175FSSS
10N200FSSS
—
—
—
10N50OSSS
10N62OSSS
10N75OSSS
10N100OSSS
10N125OSSS
10N150OSSS
10N175OSSS
10N200OSSS
—
—
10N37PSSS
10N50PSSS
10N62PSSS
10N75PSSS
10N100PSSS
10N125PSSS
10N150PSSS
10N175PSSS
10N200PSSS
—
—
1/2
5/8
3/4
1-1/4
1-1/2
2
2-1/2
3
—
—
12N75FSSS
12N125FSSS
12N150FSSS
12N200FSSS
—
—
—
—
12N75OSSS
12N125OSSS
12N150OSSS
12N200OSSS
—
—
12N50PSSS
12N62PSSS
12N75PSSS
12N125PSSS
12N150PSSS
12N200PSSS
—
—
—
—
14N75OSSS
14N100SSS
14N125OSSS
14N150OSSS
14N200OSSS
—
—
14N50PSSS
14N62PSSS
14N75PSSS
14N100PSSS
14N125PSSS
14N150PSSS
14N200PSSS
14N250PSSS
—
—
10N50FPSS
10N62FPSS
10N75FPSS
10N100FPSS
10N125FPSS
10N150FPSS
—
10N200FPSS
—
—
Abrasives
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Tools
#10
—
—
12N75FPSS
12N125FPSS
12N150FPSS
12N200FPSS
—
—
OnSite
Supply
#12
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
—
—
14N75FPSS
14N75FPSS
14N125FPSS
14N150FPSS
14N200FPSS
—
—
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
49
Rentals
—
—
14N75FSSS
14N100FSSS
14N125FSSS
14N150FSSS
14N200FSSS
14N200FSSS
—
Safety
#14
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Fasteners
Security/Tamper Proof Screws
Security Screws
NEFCO can meet your security screw needs with a variety of drive styles and head configurations
Anchors
Choose Drive Style
Phillips Pin-Head
Snake Eyes®
Spanners
Strut
One-Ways
Socket Pin-Head
Tri-Wings®
Torx® Security
Flat Head
Oval Head
Round Head
Button head
Choose Head Configuration
Trus Head
Pan Head
Threaded
Rod
Choose Thread Configuration
Tamper-resistant screws comply to the same thread size and length as
standard screws and use the same nomenclature.
Sheet Metal Screw
What About Size?
Machine Screw
Pipe
Hangers
Security screws follow the same sizing rules as machine screws and sheet
metal screws. Substituting sheet metal screws for wood applications is recommended.
Need Tools?
All security screws require specific tools to install and remove. Only the One Way
configuration allows you to get away with a standard flat screwdriver for installation. Tools are
available as 1/4 drive bit tips, angle hex keys and trouble shooter kits.
Tools
• ® Snake Eyes is a registered trademark to Tamperproof Screw Co. Inc.
• ® Torx is a registered trademark of Camcar Division of Textron Inc.
• ® Tri-Wing is a registered trademark of Phillips Screw Co.
12V Screwdrivers & Drill Drivers - Get the Job Done!
Abrasives
12V Li-Ion
Battery
For use with Milwaukee
M12™ Tools & Accessories.
Part No.
48-11-2401
2410-22
2401-22
OnSite
Supply
12V Li-Ion 3/8" Drill Driver
Safety
• 2-Speed, all-metal gear box.
• Powerful motor, up to 25% more torque.
• Ratcheting single metal sleeve chuck for
better bit retention.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
Rentals
Part No.
Description
2410-22
12V Cordless Li-Ion
3/8" Drill Driver Kit
50
12V Li-Ion Screwdriver
• Quick Bit-Loading 1/4 in. Hex Chuck for
one-handed operation
• Metal Gear Housing for job site durability
• Variable Speed Trigger for output power
control
• Over-mold side and grip
• Built-in Fuel Gauge & LED for illumination.
12V Li-Ion Battery Charger
• KIT Includes (2) Batteries, Charger, #2
Phillips ¼" Hex Insert Bit, & Storage Bag.
For Use with Milwaukee M12™ Tools and
Accessories. 30 minute charger.
Part No.
Part No.
Description
2401-22 12V Cordless Li-Ion Screwdriver
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
48-59-2401 M12 12V 30-min Charger
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
25C150HAB
25C175HAB
25C200HAB
25C250HAB
25C300HAB
25C350HAB
25C400HAB
100
100
100
100
100
100
100
5/16 - 18 Nominal Size and Threads
1-1/2
1-3/2
2
2-1/2
3
3-1/2
4
4-1/2
31C150HAB
31C175HAB
31C200HAB
31C250HAB
31C300HAB
31C350HAB
31C400HAB
31C450HAB
100
100
100
100
100
100
50
50
3/8 - 16 Nominal Size and Threads
2
2-1/2
3
3-1/2
4
4-1/2
37C200HAB
37C250HAB
37C300HAB
37C350HAB
37C400HAB
37C450HAB
100
100
100
100
100
100
Size
Part No.
Qty.
10-32 x 3/8
10F37HCMZG
100
1
1-1/2
2
2-1/2
3
3-1/2
4
5
Part No.
1/4 Diameter
25C100LABS
25C150LABS
25C200LABS
25C250LABS
25C300LABS
25C350LABS
25C400LABS
25C500LABS
Philadelphia, PA
610-647-8070
8C37THSZ
8C50THSZ
8C75THSZ
8C100THSZ
100
100
100
100
10 - 24 Nominal Size and Threads
3/8
1/2
3/4
1
1-1/2
10C37THSZ
10C50THSZ
10C75THSZ
10C100THSZ
10C150THSZ
10 - 32 Nominal Size and Threads
3/8
1/2
3/4
1
1-1/2
2
10F37THSZ
10F50THSZ
10F75THSZ
10F100THSZ
10F150THSZ
10F200THSZ
100
100
100
100
100
100
1/4 - 20 Nominal Size and Threads
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
25C50THSZ
25C75THSZ
25C100THSZ
25C125THSZ
25C150THSZ
25C200THSZ
25C250THSZ
Qty.
25
25
25
25
25
10
25
25
Fasteners
#14
100
100
100
100
100
100
100
100
100
100
100
100
1-1/4
1-3/4
2
3
4
5
6
7
8
9
10
11
12
14
14N125RDS
14N175RDS
14N200RDS
14N300RDS
14N400RDS
14N500RDS
14N600RDS
14N700RDS
14N800RDS
14N900RDS
14N1000RDS
14N1100RDS
14N1200RDS
14N1400RDS
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
3" Roof Deck Plate
Size
Part No.
300DSRPH 3”
5 /16 - 8 Nominal Size and Threads
3/4
1
1-1/4
1-1/2
2
31C75THSZ
31C100THSZ
31C125THSZ
31C150THSZ
31C200THSZ
100
100
100
100
100
Zamac Nailins
3/8 - 16 Nominal Size and Threads
Green Ground
Screws
Size
3/8
1/2
3/4
1
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Threaded
Rod
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
8 - 32 Nominal Size and Threads
12N162RDS
12N225RDS
12N287RDS
12N325RDS
12N375RDS
12N437RDS
12N500RDS
12N600RDS
12N700RDS
12N800RDS
Pipe
Hangers
1/4 - 20 Nominal Size and Threads
100
1-5/8
2-1/4
2-7/8
3-1/4
3-3/4
4-3/8
5
6
7
8
Qty.
Tools
100
100
100
100
6C5THSZ
Part No.
#12
3/4
1
1-1/4
1-1/2
2
37C75THSZ
37C100THSZ
37C125THSZ
37C150THSZ
37C200THSZ
Abrasives
10C150HAB
10C200HAB
10C250HAB
10C300HAB
1/2
Length
100
100
100
100
100
Size
Steel
Stainless Steel
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
1/4 x 2
25D75RHD
25D100RHD
25D125RHD
25D150RHD
25D200RHD
25D75RHD/WSN
25D100RHD/WSN
25D125RHD/WSN
25D150RHD/WSN
25D200RHD/WSN
OnSite
Supply
1-1/2
2
2-1/2
3
Length Part No.
Qty.
6 - 32 Nominal Size and Threads
18-8 Stainless Steel Hex Head Lag Screws
• Used in conjunction with standard lag shields in concrete
or directly in wood timber
Size
Part No.
Qty.
Size
25
25
25
3
4
5
5/16 Diameter
1-1/2
2
2-1/2
Washington D.C.
877-419-2755
31C150LABS
31C200LABS
31C250LABS
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Part No.
5/16 Diameter
Qty.
31C300LABS
31C400LABS
31C500LABS
25
10
10
51
Safety
Size
Part No.
Qty.
10 - 24 Nominal Size and Threads
Roofgrip Steel Deck Screws
• Zinc Plated
Rentals
• Uniform Diameter
• Machine screw thread/lag thread
• Also available in zinc plated
Anchors
Thumb Screws
Hanger Bolts
Strut
Roofing Fasteners / Screws
Fasteners
Plow Bolts / Waterworks Bolts
Plow Bolts - Plain Alloy Steel
Grade 5
Corporation Eye Bolts
• Black Finish
Anchors
Primary use is for attaching scraper and plow blades
• Available in flat and dome head configurations
• Minimum tensile 120,000 PSI
Size
Part No.
Qty.
3/8 - 16 Nominal Size and Threads
Strut
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
37C100PLB5
37C125PLB5
37C150PLB5
37C175PLB5
37C200PLB5
37C250PLB5
37C300PLB5
Threaded
Rod
Pipe
Hangers
43C125PLB5
43C150PLB5
43C175PLB5
43C200PLB5
43C225PLB5
43C255PLB5
43C300PLB5
Part No.
3/4 x 4
3/4 x 4-1/2
75C400TIB
75C450TIB
Socket Washer
100
100
100
100
100
50
50
• Steel, plain or electro-plated finish
• For use with B3134 four-bolt
underground clamp to secure rods.
Part
No.
7/16 - 14 Nominal Size and Threads
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
HS
75DSCW 3/4"–10
100DSCW 1"–9
112DSCW 1-1/8"–7
125DSCW 1-1/4"–7
137DSCW 1-3/8"–6
150DSCW 1-1/2"–6
50
50
50
50
50
50
50
Tools
50C125PLB5
50C150PLB5
50C175PLB5
50C200PLB5
50C225PLB5
50C250PLB5
50C300PLB5
50C350PLB5
4" – 8"
10" – 12"
14" – 16"
18"
20"
24"
(inches) Qty/
'D'
'E' 'F' lb.
7/8
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
3
1/2
3-1/2 1/2
3-1/2 5/8
3-1/2 3/4
3-1/2 3/4
3-1/2 3/4
119
159
181
229
223
217
Duc Lug
1/2 - 13 Nominal Size and Threads
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/2
Tie Rod For Use w/
Size
Pipe Size
• Ductile Iron
• For 4" - 12" pipe
• 50/box
50
50
50
50
50
50
50
25
Part No.
0UDUL/P
Value Added Services…
5/8 - 11 Nominal Size and Threads
Abrasives
2
2-1/4
2-1/2
2-3/4
3
2
2-1/2
3
62C200PLB5
62C225PLB5
62C250PLB5
62C275PLB5
62C300PLB5
75C200PLB5
75C250PLB5
75C300PLB5
25
25
25
25
25
20
20
20
• Solving your application
problems
• Saving you time and
money
•
•
•
•
Supplying the technical edge
Standing for Quality
Servicing the Sale
Stocking the product
OnSite
Supply
Corten T-Head Bolts With Nuts
• Steel, plain or electro-plated finish
Safety
Part No.
62C250CTB
62C300CTB
62C350CTB
75C300CTB
75C350CTB
75C400CTB
75C450CTB
100C600CTB
Rentals
52
Bolt
Size
5/8 x 2-1/2
L
Thread
5/8 - 11
D
Bolt
Length
2.5
TL
Bolt
Dia.
.625
W
H
Thread Head
Length
1.25
1.50
NT
Head
Width
.625
F
Nut
Height
.625
CQ
Across Container Wt./
Thickness Flats
Qty.Pc
1.062
400
45
5/8 x 3
5/8 x 3-1/2
3/4 x 3
3/4 x 3-1/2
3/4 x 4
3/4 x 4-1/2
1 x 6
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
3/4 - 10
3/4 - 10
1 - 8
3.0
3.5
3.0
3.5
4.0
4.5
6.0
.625
.625
.750
.750
.750
.750
1.0
1.25
1.25
1.75
1.75
1.75
1.75
3.00
.625
.625
.750
.750
.750
.750
1.00
.625
.625
.750
.750
.750
.750
1.012
1.062
1.062
1.250
1.250
1.250
1.250
1.625
Hartford, CT
800-969-0285
1.50
1.50
1.75
1.75
1.75
1.75
2.25
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
375
375
250
225
200
175
75
49
53
79
84
89
94
196
Philadelphia, PA
610-647-8070
100
100
100
100
100
100
100
100
100
100
3/8 - 16 Nominal Size and Threads
1/2
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/2
37C50HCSB
37C75HCSB
37C87HCSB
37C100HCSB
37C125HCSB
37C150HCSB
37C175HCSB
37C200HCSB
37C225HCSB
37C250HCSB
37C300HCSB
37C350HCSB
100
100
100
100
100
100
100
100
100
50
50
50
1/2 - 13 Nominal Size and Threads
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
50C100HCSB
50C125HCSB
50C150HCSB
50C175HCSB
50C200HCSB
50C225HCSB
50C250HCSB
50C300HCSB
50
50
50
50
50
50
50
50
5/8 - 11 Nominal Size and Threads
1-1/2
2
2-1/2
3
Philadelphia, PA
610-647-8070
62C150HCSB
62C200HCSB
62C250HCSB
62C300HCSB
Washington D.C.
877-419-2755
25
25
25
25
Qty.
1/4 - 20
1/4 - 28
5/16 - 18
5/16 - 24
3/8 - 16
3/8 - 24
7/16 - 14
7/16 - 20
1/2 - 13
1/2 - 20
5/8 - 11
5/8 - 18
3/4 - 10
3/4 - 16
7/8 - 9
7/8 - 14
25CHFNB
25FHFNB
31CHFNB
31FHFNB
37CHFNB
37FHFNB
43CHFNB
43FHFNB
50CHFNB
50FHFNB
62CHFNB
62FHFNB
75CHFNB
75FHFNB
87CHFNB
87FHFNB
100
100
100
100
100
100
50
50
25
25
25
25
20
20
15
15
Strut
Part No.
Threaded
Rod
31C50HCSB
31C62HCSB
31C75HCSB
31C100HCSB
31C125HCSB
31C150HCSB
31C175HCSB
31C200HCSB
31C250HCSB
31C300HCSB
Size
Pipe
Hangers
5/16 - 18 Nominal Size and Threads
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Brass Finish Hex Nuts
Brass Heavy Hex Nuts
Size
Part No.
Qty.
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
1 - 8
25CHHNB
31CHHNB
37CHHNB
43CHHNB
50CHHNB
62CHHNB
75CHHNB
87CHHNB
100CHHNB
100
100
100
50
50
25
20
15
10
Tools
100
100
100
100
100
100
100
100
100
100
100
100
100
Abrasives
25C50HCSB
25C62HCSB
25C75HCSB
25C87HCSB
25C100HCSB
25C125HCSB
25C150HCSB
25C175HCSB
25C200HCSB
25C225HCSB
25C250HCSB
25C300HCSB
25C350HCSB
I use product faster than most people
can deliver it...
Do you have Inventory Management
Programs or Just-In-Time capabilities?
NEFCO Is small enough to take the time to develop a
system specifically designed for your project needs.
NEFCO Is large enough to be plugged in to the leading
edge technology that is necessary to make systems
work for you.
Call today and we will work with you to build a solution.
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
53
OnSite
Supply
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/2
Safety
Part No.
Qty.
1/4 - 20 Nominal Size and Threads
Rentals
Length
The most alloy of copper, brass is basically 2/3 copper
and 1/3 zinc. It is non-magnetic with good strength and
toughness. High electrical conductivity, and an attractive,
lustrous finish. It has good corrosion resistance, but not
in salt water. Brass is commonly used in the electrical and
communications industries, builders hardware and some
marine applications.
Fasteners
Brass Screws and Nuts
Brass Hex Cap Screws
Anchors
Brass Hex Cap Screws / Nuts
Fasteners
Brass Screws / Washers
Brass Machine Screws
Anchors
The most common alloy of copper, brass is basically 2/3
copper and 1/3 zinc. It is non-magnetic with good strength
and toughness. High electrical conductivity, and an attractive,
lustrous finish. It has good corrosion resistance, but not
in salt water. Brass is commonly used in the electrical and
communications industries, builders hardware and some
marine applications.
Strut
Threaded
Rod
Length
Flat Slotted
Round Slotted
Qty.
4 - 40 Nominal Size and Threads
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
4C18FSMB
4C25FSMB
4C31FSMB
4C37FSMB
4C50FSMB
4C62FSMB
4C75FSMB
4C100FSMB
4C125FSMB
4C18RSMB
4C25RSMB
4C31RSMB
4C37RSMB
4C50RSMB
4C62RSMB
4C75RSMB
4C100RSMB
4C125RSMB
100
100
100
100
100
100
100
100
100
6 - 32 Nominal Size and Threads
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
3
6C18FSMB
6C25FSMB
6C31FSMB
6C37FSMB
6C50FSMB
6C62FSMB
6C75FSMB
6C100FSMB
6C125FSMB
6C150FSMB
6C200FSMB
6C300FSMB
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
8C18FSMB
8C25FSMB
8C31FSMB
8C37FSMB
8C50FSMB
8C62FSMB
8C75FSMB
8C87FSMB
8C100FSMB
8C125FSMB
8C150FSMB
8C175FSMB
8C200FSMB
6C18RSMB
6C25RSMB
6C31RSMB
6C37RSMB
6C50RSMB
6C62RSMB
6C75RSMB
6C100RSMB
6C125RSMB
6C150RSMB
6C200RSMB
6C300RSMB
100
100
100
100
100
100
100
100
100
100
100
100
Safety
Rentals
100
100
100
100
100
100
100
100
100
100
100
100
100
10C25FSMB
10C31FSMB
10C37FSMB
10C50FSMB
10C62FSMB
10C75FSMB
10C87FSMB
10C100FSMB
10C125FSMB
10C150FSMB
10C175FSMB
10C200FSMB
10C250FSMB
10C300FSMB
10C25RSMB
10C31RSMB
10C37RSMB
10C50RSMB
10C62RSMB
10C75RSMB
10C87RSMB
10C100RSMB
10C125RSMB
10C150RSMB
10C175RSMB
10C200RSMB
10C250RSMB
10C300RSMB
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10F25FSMB
10F31FSMB
10F37FSMB
10F50FSMB
10F62FSMB
10F75FSMB
10F87FSMB
10F100FSMB
10F125FSMB
10F150FSMB
10F175FSMB
10F200FSMB
10F250FSMB
10F300FSMB
10F25RSMB
10F31RSMB
10F37RSMB
10F50RSMB
10F62RSMB
10F75RSMB
10F87RSMB
10F100RSMB
10F125RSMB
10F150RSMB
10F175RSMB
10F200RSMB
10F250RSMB
10F300RSMB
100
100
100
100
100
100
100
100
100
100
100
100
100
100
12 - 24 Nominal Size and Threads
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Size
Part No.
Qty.
1/4
3/8
1/2
5/8
3/4
25DFLWB
37DFLWB
50DFLWB
62DFLWB
75DFLWB
100
100
100
100
100
Hartford, CT
800-969-0285
1/4
5/16
3/8
1/2
5/48
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Brass Flat Washers
54
Flat Slotted
Round Slotted
Qty.
10 - 24 Nominal Size and Threads
10 - 32 Nominal Size and Threads
8 - 32 Nominal Size and Threads
8C18RSMB
8C25RSMB
8C31RSMB
8C37RSMB
8C50RSMB
8C62RSMB
8C75RSMB
8C87RSMB
8C100RSMB
8C125RSMB
8C150RSMB
8C175RSMB
8C200RSMB
Length
12C50FSMB
12C75FSMB
12C100FSMB
12C125FSMB
12C150FSMB
12C200FSMB
12C250FSMB
12C300FSMB
12C50RSMB
12C75RSMB
12C100RSMB
12C125RSMB
12C150RSMB
12C200RSMB
12C250RSMB
12C300RSMB
100
100
100
100
100
100
100
100
Not in the catalog?
Give us a call we
are constantly adding new
items to our inventory.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
5/16 - 18 Nominal Size and Threads
31C50RSMB
31C62RSMB
31C75RSMB
31C100RSMB
31C125RSMB
31C150RSMB
31C175RSMB
31C200RSMB
31C250RSMB
31C300RSMB
37C75FSMB
37C100FSMB
37C125FSMB
37C150FSMB
37C200FSMB
37C250FSMB
37C300FSMB
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Size
Size
Part No.
Qty.
4
6
8
10
1/4
5/16
3/8
1/2
5/8
3/4
4LOWJ
6LOWJ
8LOWJ
10LOWJ
25LOWJ
31LOWJ
37LOWJ
50LOWJ
62LOWJ
75LOWJ
100
100
100
100
100
100
100
100
100
100
Don’t see what you need?
Call us today!
6 - 32
8 - 32
10 - 24
10 - 32
1/4 - 20
3/8 - 16
50C100FSMB
50C125FSMB
50C150FSMB
50C175FSMB
50C200FSMB
50C250FSMB
50C300FSMB
6 - 32
8 - 32
10 - 24
10 - 32
1/4 - 20
3/8 - 16
Countersunk
Finish Washers Brass
Size
Part No.
Qty.
4
6
8
10
12
14
4NCFWB
6NCFWB
8NCFWB
10NCFWB
12NCFWB
14NCFWB
100
100
100
100
100
100
Part No.
6CCANB
8CCANB
10CCANB
10FCANB
25CCANB
37CCANB
Washington D.C.
877-419-2755
Part No.
6CCANB
8CCANB
10CCANB
10FCANB
25CCANB
37CCANB
Qty.
Size
100
100
100
100
100
100
2 - 56
3 - 48
4 - 40
5 - 40
6 - 32
8 - 32
10 - 24
10 - 32
12 - 24
1/4 - 20
1/4 - 28
5/16 - 18
3/8 - 16
Qty.
100
100
100
100
100
100
Stop wrestling
with Fastener
problems...
Call us for
easy solutions.
Boston , MA
800-645-6155
-
-
-
-
-
-
-
50
50
50
50
50
50
50
Brass Machine
Screw Nuts
Brass Acorn Nuts
Size
100
100
100
100
100
100
50
1/2 - 13 Nominal Size and Threads
• Nickel -2 piece
• For use with Brass Fasteners
37C75RSMB
37C100RSMB
37C125RSMB
37C150RSMB
37C200RSMB
37C250RSMB
37C300RSMB
Anchors
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Acorn Cap Nuts
Silicon Bronze
Lock Washer
Philadelphia, PA
610-647-8070
100
100
100
100
100
100
100
100
100
100
Threaded
Rod
31C50FSMB
31C62FSMB
31C75FSMB
31C100FSMB
31C125FSMB
31C150FSMB
31C175FSMB
31C200FSMB
31C250FSMB
31C300FSMB
Flat Slotted
Round Slotted
Qty.
3/8 - 16 Nominal Size and Threads
Pipe
Hangers
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Length
Strut
100
100
100
100
100
100
100
100
100
100
100
Part No.
Qty.
2CMSNB
3CMSNB
4CMSNB
5CMSNB
6CMSNB
8CMSNB
10CMSNB
10FMSNB
12CMSNB
25CMSNB
25FMSNB
31CMSNB
37CMSNB
100
100
100
100
100
100
100
100
100
100
100
100
100
Brass Wing
Nuts
Size
Part No.
Qty.
4
6
8
10
1/4
5/16
3/8
1/2
5/8
3/4
4LOWJ
6LOWJ
8LOWJ
10LOWJ
25LOWJ
31LOWJ
37LOWJ
50LOWJ
62LOWJ
75LOWJ
100
100
100
100
100
100
100
100
100
100
Hartford, CT
800-969-0285
55
Tools
25C37RSMB
25C50RSMB
25C62RSMB
25C75RSMB
25C100RSMB
25C125RSMB
25C150RSMB
25C175RSMB
25C200RSMB
25C250RSMB
25C300RSMB
Abrasives
25C37FSMB
25C50FSMB
25C62FSMB
25C75FSMB
25C100FSMB
25C125FSMB
25C150FSMB
25C175FSMB
25C200FSMB
25C250FSMB
25C300FSMB
OnSite
Supply
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
Brass Slotted Machine Screws
Safety
Flat Slotted
Round Slotted
Qty.
1/4 - 20 Nominal Size and Threads
Rentals
Length
Fasteners
Brass Machine Screws / Nuts
Fasteners
Brass Wood Screws
Brass Wood Screws
Anchors
Due to the soft nature of
brass screws pre-drilling and
lubricating is recommended.
Length Flat Phillips
Strut
4
4
4
4
4
x
x
x
x
x
Slotted Round Slotted Flat
4" Diameter
3/8 4N37FPWB
1/2 4N50FPWB
5/8 4N62FPWB
3/4 4N75FPWB
1 4N100FPWB
4N37RWSB
4N50RWSB
4N62RWSB
4N75RWSB
4N100RWSB
Qty.
Threaded
Rod
Pipe
Hangers
4N37FWSB
4N50FWSB
4N62FWSB
4N75FWSB
4N100FWSB
100
100
100
100
100
6N37FWSB
6N50FWSB
6N62FWSB
6N75FWSB
6N100FWSB
6N125FWSB
6N150FWSB
100
100
100
100
100
100
100
8N50FWSB
8N62FWSB
8N75FWSB
8N87FWSB
8N100FWSB
8N125FWSB
8N150FWSB
8N175FWSB
8N200FWSB
100
100
100
100
100
100
100
100
100
6" Diameter
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
—
6N50FPWB
6N62FPWB
6N75FPWB
6N100FPWB
6N125FPWB
6N150FPWB
6N37RWSB
6N50RWSB
6N62RWSB
6N75RWSB
6N100RWSB
6N125RWSB
6N150RWSB
8" Diameter
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
8N50FPWB
8N62FPWB
8N75FPWB
8N87FPWB
8N100FPWB
8N125FPWB
8N150FPWB
8N175FPWB
8N200FPWB
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
10N75FPWB
10N100FPWB
10N125FPWB
10N150FPWB
10N175FPWB
10N200FPWB
10N250FPWB
10N300FPWB
8N50RWSB
8N62RWSB
8N75RWSB
8N87RWSB
8N100RWSB
8N125RWSB
8N150RWSB
8N175RWSB
8N200RWSB
10" Diameter
Tools
Abrasives
10N75RWSB 10N75FWSB 100
10N100RWSB 10N100FWSB 100
10N125RWSB 10N125FWSB 100
10N150RWSB 10N150FWSB 100
10N175RWSB 10N175FWSB 100
10N200RWSB 10N200FWSB 100
10N250RWSB 10N250FWSB 100
10N300RWSB 10N300FWSB 100
12" Diameter
OnSite
Supply
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
12N100FPWB 12N100RWSB 12N100FWSB 100
12N125FPWB 12N125RWSB 12N125FWSB 100
12N150FPWB 12N150RWSB 12N150FWSB 100
12N175FPWB 12N175RWSB 12N175FWSB 100
12N200FPWB 12N200RWSB 12N200FWSB 100
12N250FPWB 12N250RWSB 12N250FWSB 100
12N300FPWB 12N300RWSB 12N300FWSB 100
14" Diameter
Safety
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
—
14N100RWSB 14N100FWSB 100
14N125FPWB 14N125RWSB 14N125FWSB 100
14N150FPWB 14N150RWSB 14N150FWSB 100
—
14N175RWSB 14N175FWSB 100
14N200FPWB 14N200RWSB 14N200FWSB 100
14N250FPWB 14N250RWSB 14N250FWSB 100
14N300FPWB 14N300RWSB 14N300FWSB 100
Heli-Coil Screw Thread Inserts
Heli-Coil Inserts are precision formed screw thread
coils of 18-8 (Type 302/304) stainless steel wire
having a diamond shaped cross-section. They are
manufactured from round wire cold rolled into
a diamond shape producing an ultimate tensile
strength of approximately 200,000 to 250,000 P.S.I.
(a hardness of Rc 43-50). The resultant surface
finish is a mirror-like 8-16 micro-inches. This wire is
then wound into a spiral coil which, when installed
into Heli-Coil tapped holes, provides permanent
conventional 60 O Internal Screw threads. The
assembled insert accommodates any standard bolt or
screw (MIL-S-7742) and MIL-S-8879 (UNJ controlled
radius root) male threaded members.
What Types, Sizes and Materials
Heli-Coil inserts are larger in diameter before
installation than the tapped hole. During
installation the inserting tool applies torque
to the tang, reducing the diameter of the
leading coil permitting it to enter the tapped
thread. After installation each high tensile
stainless steel coil of the insert expands
outward with a spring-like action permanently
anchoring the insert.
Both Standard and Screw-Lock Inserts are available
from stock in the following sizes:
• UNC - Sizes #2 and UNF - Sizes #3 through 1-1/2” Five lengths each sizes
• Inserts are also available in UNEF, UNS, 8UN,
12UN, 16UN, Metric, Spark Plug and Pipe Thread
• In addition to Stainless Steel, inserts are available
in Phosphor Bronze and Inconel X-750
There are two designs of
Heli-Coil Inserts:
• Standard which provides a
smooth free-running thread;
AND
• Screw Lock which provides
self-locking torque on the male
member by a series of “chords” on one or more of
the insert coils. Screw-Lock Inserts are dyed red for
identification.
CALL TODAY for Complete List
Stop wrestling with
Fastener problems . . .
Not
in the Catalog?
Call
us for
Give us a call.
solutions!
We are easy
constantly
adding new items to
our inventory.
Rentals
56
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Customized Jobsite Managed Inventory Programs -
Fasteners
Managed Inventory System
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
57
Rentals
Safety
OnSite
Supply
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
Strut
Call Us Today For More Information
Fasteners
Hex Keys / Dowel Pins
Anchors
Short and Long Arm Inch Series
Short and Long Arm Metric Series
Meets the requirements of ASME/ANSI B18.3 and Fed.
Std. GG-K-275 AMED 1
Meet the requirements of ASME/ANSI B18.3
(Torque requirements apply to Long Arm Series only)
• Precision Tolerances • Heat treated Alloy Steel • Black
Finish
• Precision Tolerances • Heat Treated Alloy Steel • Black
Finish
Strut
Long Arm
Short Arm
Long Arm
Short Arm
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
Nominal Part
Size
No.
Std.
Pack
Nominal Part
Size
No.
Std.
Pack
Nominal Part
Size
No.
Std.
Pack
Nominal Part
Size
No.
Std.
Pack
.035
.050
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
1/4
7/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
100
100
100
100
100
100
100
100
100
100
50
50
25
25
10
10
10
5
5
2
2
1
1
1
1
.028
.035
.050
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-1/2
100
100
100
100
100
100
100
100
100
100
100
100
50
50
25
10
10
10
10
5
5
5
1
1
0.9
1.3
1.5
2
2.5
3
4
5
6
8
10
12
14
17
19
100
100
100
100
100
100
100
100
50
50
25
10
10
5
5
0.7
0.9
1.3
1.5
2
2.5
3
4
5
6
8
10
12
14
17
19
22
100
100
100
100
100
100
100
100
100
50
50
25
10
10
1
1
1
58007
58003
58001
58002
58004
58005
58006
58010
58012
58014
58016
58018
58020
58022
58023
58024
58026
58028
58030
58032
58034
58036
58038
58040
58042
57002
57004
57006
57008
57010
57012
57013
57014
57018
57020
57022
57024
57026
57028
57030
57031
57032
57034
57036
57038
57040
57042
57044
57046
58048
58049
58050
58052
58054
58056
58058
58060
58062
58064
58066
5808
58090
58092
58094
57129
57131
57135
57116
57118
57120
57122
57124
57126
57128
57130
57132
57133
57134
57138
57142
57144
Not listed...
It may be in stock or
we can order it for you!
Dowel Pins
OnSite
Supply
Cotter Pins
Dowel Pin
Safety
Spring Pins
(Roll Pins)
Oversized Dowel Pins
Rentals
58
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Socket Cap Screws
Anchors
18-8 Stainless
Steel Socket
Head Screws
Threaded
Rod
Button Head
Socket Head Cap
Screws
Low Head Socket
Head Cap Screws
Coarse & Fine
Thread Series
Pipe
Hangers
Socket Shoulder
Screws
(Stripper Bolts)
Flat Head Socket
Cap Screws
Tools
Socket Set Screws
Coarse & Fine
Thread
Strut
Standard 1960
Series Socket
Head
Cap Screws
Fasteners
Socket Screws
Square Head Set
Screws Cup Point
Cone Point
18-8 Stainless Steel
Socket Set Screws
Cup Point
OnSite
Supply
Flat Point
1/2 Dog Point
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
59
Rentals
Safety
Oval Point
Philadelphia, PA
610-647-8070
Abrasives
Kurled Point
Fasteners
Metric Fasteners
Metric Fasteners
Anchors
NEFCO Supplies a full line of Metric Fasteners in both DIN and ISO Standards.
Available Product Offerings:
Strut
Threaded
Rod
• A2 (18-8) and A4 (316) Stainless Steel Hex Cap Screws
and Sockets
• Socket Products Din 912, Button Head, Flat Head, Low
Head, and Headless
• Dowel Pins
• Hex Nuts - Class 6.8, 10, 12 - Plain, Zinc, A2, A4, Nylon
Insert
• Machine Screws - Slotted or Phillips - Cheese, Flat or
Round Head
• Flat Washers - A325, Fender, Class 10 and more
• Lock Washers - Split, Internal Tooth, External Tooth, and
more
• All Thread Rod in 1 meter lengths, with special lengths
upon request
• Custom orders made to your print
• Hex Cap Screws (Bolts) Grade 4.6, 8.8, 10.9, 12.9 in both plain and zinc plated
or custom plated to your specifications
Pipe
Hangers
The following tables should help you to identify the products that you need.
Things To Remember:
Tools
F 8.8 is approximately equal to grade 5
F 10.9 is approximately equal to grade 8
F 12.9 is the standard for socket products. Although other grades of socket products are available in
Europe, 12.9 is generally only imported to the U.S. To read the size of a metric fastener, the
nominal diameter is listed first, followed by the thread pitch, measured in millimeters, as the
distance from the peak of one thread to the next. Then the useable length is listed in millimeters.
Example: M 12 - 1.75 x 50
• 1 Millimeter = .03937 inches
• 1 inch = 25.4 millimeters
Abrasives
U.S. / Metric Conversion Equivalents
OnSite
Supply
Qty.
Length
Area
Volume
Force
Pressure
Torque
U.S.
1 in
1 ft
1 sq in
1 gal
1 lb
1 psi
1 in-lb
1 ft-lb
Metric
Metric
25.4 mm
1 mm
304.8 mm
1 mm
645.16 sq mm
1 sq mm
3.785 litres
1 litre
4.448 N
1 N
6895 Pa or 0.006895 MPa 1 MPa
0.113 nm
1 nm
1.356 nm
1 nm
Other common conversions:
U.S.
1 N = 1 kg • m/s2
0.03937 in
1 Pa 2 1 N/m2
0.00328 ft
1 MPa = 1 N/mm2
0.00155 sq ft
0.2542 gal
Example: To convert length to mm, multiply
0.2248 lb
total inches by 25.4
145.1 psi
8.851 in-lb
0.738 ft-lb
If you need help identifying the exact product that you need, call a NEFCO representative today!
Safety
Q
Q
Q
Rentals
60
Hartford, CT
800-969-0285
If they have it overseas we can have it imported for you.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Metric Mechanical Specifications with Grade Markings
Fasteners
Metric Fasteners
Size Range
Min. Prod Min. Tensile
Strength Strength
(MPA)
(MPA)
Core Hardness Rockwell Mint Yield Grade
Strength Identification
Min.
Max.
(MPA)
Marking
4.6
8.8
10.9
12.9
M5 - M36
M5 - M16
M16 - M36
M5 - M36
225
580
600
830
400
800
830
1040
B67
C22
C23
C32
B99.5
C32
C34
C39
240
640
660
940
4.6
8.8
8.8
10.9
M1.6 - M36 970
1220
C39
C44
1100
12.9
Threaded
Rod
Low or Medium carbon steel
Medium carbon steel: quenched
and tempered
Low carbon alloy steel:
quenched and tempered
Alloy steel: quenched and tempered
Strut
Metric
Property
Class
Material
Mechanical Properties of Metric Nuts
Thread Tensile Stress Areas, U.S. Metric
Conversion Equivalents
Proof Load
Stress (N/mm2)
800
810
830
840
920
1040
1050
1060
1150
1160
1190
1200
920
Grade Identification
Marking
8
10
Tools
Nominal
Material
Size (mm)
Medium carbon steel
Up to 4
quenched and tempered
Over 4 to 7
Over 7 to 10
Over 10 to 16
Over 16 to 39
Low carbon alloy steel
Up to 10
quenched and tempered
Over 10 to 16
Over 16 to 39
Alloy steel quenched and tempered Up to 7
Over 7 to 10
Over 10 to 16
Over 16 to 39
Over 16 to 39
11
Abrasives
Standard and Class
ISO 898/2 - Class 8
ISO 898/2 - Class 10
ISO 898/2 - Class 12
Pipe
Hangers
Mechanical Properties of Metric Nuts
Metric Hex Nut Specifications and Dimensions
Source: DIN 934
Property Class 6
M1
2.71
2.5
0.8
M1.4
3.28
3
1.2
M1.6
3.41
3.2
1.3
M2
4.32
4
1.6
M2.2
5.2
4.5
1.8
M2.3
4.88
4.5
1.8
M2.5
5.45
5
2
M2.6
5.45
5
2
M3
6.01
5.5
2.4
M3.5
6.58
6
2.8
M4
7.66
7
3.2
M5
8.79
8
4
OnSite
Supply
d1
e (min)
s
m (max)
M6
11.05
10
5
Philadelphia, PA
610-647-8070
M8
14.38
13
6.5
M10
18.9
17
8
M12
21.1
19
10
M14
24.49
22
11
Washington D.C.
877-419-2755
M16
26.75
24
13
M18
29.56
27
15
M20
32.95
30
16
M22
35.03
32
18
Boston , MA
800-645-6155
M24
39.55
36
19
M27
45.2
41
22
M30
50.85
46
24
M33
55.37
50
26
Hartford, CT
800-969-0285
M36
60.79
55
29
M39
66.44
60
31
M42
71.3
65
34
M48
82.6
75
38
61
Rentals
d1
e(min)
s
m(max)
Safety
Property Class 8, 10 and 12
Fasteners
Rivet Tools
Big Daddy® 39031
HP-2® / 39000
Anchors
Strut
Threaded
Rod
• Precision die cast body of high strength aluminum alloy
• A steel insert into which the working nose-piece is
screwed
• A fulcrum pin that cannot rotate
• Heat treated carbon steel upper handle
• Long life jaws
Pipe
Hangers
Tools
Here’s Why
Even in high strength aluminum alloy, the threads into
which the working nose-piece is screwed are not strong
enough to resist the pulling force of repeated rivet setting,
or the excessive torque often applied when tightening
nose-pieces. The HP-2 has a special steel insert which
eliminates this.
A fulcrum pin that rotates during rivet setting will
elongate the engaging holes in the aluminum body causing
premature and expensive tool failure. Marson’s HP-2
has a unique cold formed, heat treated steel fulcrum pin
with a square shoulder which fits into a square hole in
the aluminum body. The Fulcrum Pin cannot rotate. The
opposite end passes through a heat treated steel bushing
that also fits into a square hole. Includes nose-pieces
for setting 3/32”, 1/8”, 5/32” and 3/16” diameter rivets.
Weighs 1 lb, 3 oz.
Part No.
Description
39000
39000 HP-2 Riveter
Abrasives
Riveter
OnSite
Supply
The V2 air/hydraulic riveter will
set rivets from 3/32” diameter
in all materials, up to 3/16”.
Pulling force of 1,940 lbs.
with a stroke of .551". The
recommended airline pressure
is 85-95 PSI.
Air Hydraulic V-2 79014
Part No.
Description
79014
79014 V2 Riveter
Safety
Rentals
62
Hartford, CT
800-969-0285
Marson’s Big Daddy™ has a steel insert cast into the
aluminum body to provide stronger threads for the nosepieces listed.
Reduction gear design, high strength alloys and long
handles provide easy installation of Klik-Fast Rivets
through the 1/4” diameter in all alloys.
A One-piece collect case eliminates the need to adjust the
tool when changing rivet diameters. Spare nose-pieces
are stored in the single unit body construction. Standard
nose-pieces included are 5/32”, 3/16” and 1/4”. Setting of
1/8” diameter rivets requires a special nose-piece.
• This tool is also capable of setting 3/16” and 1/4” KilkSplit and Monobolt ® rivets
• Adapter Kit #39009 - Big Daddy Head Extension Kit
adds 2-1/2” in length of head
• Weighs 3-3/4 lb
Part No.
Description
39031
Big Daddy Riveter
Air
Hydraulic M-3
Heavy-Duty Riveter
39054
This heavy-duty air/hydraulic
riveter with its newly designed
machined forged head can
hold up under demanding
continuous use. The steel
forged head allows for
continuous full operating power
and less internal wear. The M-3
will set blind rivets from 1/8”
diameter in all alloys, up to 3/16”. Included with the M-3
are standard 1/8”, 5/32”, and 3/16” nosepieces, a service
wrench, swivel inlet air coupler and a mandrel collection
bottle. The recommended airline pressure is 85-95 PSI.
Weighs 3.0 lbs.
Part No.
Description
39054
39054 M-3 Riveter
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Open End
• For blind fastening where there is no access to oposite side
of work
• Simple to install
• Wide variety of head styles and lengths available from 3/32"
to 1/4" diameters.
Steel/steel, Aluminum/
aluminum, Aluminum/steel,
Stainless/stainless, Stainless/
steel, Copper/brass, Copper/
steel
Closed End
• Moisture-resistant due to tight seal
• Greater shear and tensile strength
• Mandrel is retained 100% of the time
• 1/8" to 1/4" diameters
Multi-Grip
• Extended grip range capacity
• Reduces inventory (fewer sizes required)
• Use as a standard open end rivet
• 1/8" to 3/16" diameters.
Aluminum/steel, Steel/steel
• Large footprint on blind side
• Multi-grip capability
• Oversized hole tolerant
• Great for soft or brittle materials
Klik-Lok
•
•
•
•
Permanently retained mandrel provides increased shear
and tensile values
Use in high vibration applications
Provides weather-resistant joint
Available in 3/6" and 1/4" diameters
Steel/steel,
Aluminum/aluminum,
Stainless/stainless
• High clamp up
• High shear strength
• Creates a wide bearing surface
• 1/4" diameter
Aluminum/steel
Special
Application
• Small flange rivet used primarily for fastening decorative
materials on boats, automobiles, trucks & other motor
vehicles.
• Best suited to applications where a discreet, secure
installation of non-critical components is needed.
Plastic
•
•
•
Stainless/steel,
aluminum/aluminum
Precision-molded, all-nylon
Secure lock prevents pull-out
Fasten plastic to plastic, plastic to metal or plastic to
fiberglass
Head Styles
Large Flange
Tools
T-Rivets
Steel/steel
Pipe
Hangers
Q-Lok
• Retained mandrel increases shear and tensile strength
• Use in high vibration applications
• Mandrel breaks flush when used in mid-grip range
• Moisture-resistant due to tight seal
• 1/8" to 3/16" diameters.
Threaded
Rod
Aluminum/aluminum
Abrasives
Tri-Bulb
Aluminum/steel, aluminum/
aluminum, Stainless/stainless
Nylon
Countersunk
A - First Letter
Rivet Code
B - Second Letter
Explanation:
L - Third Letter (if any)
Example: ABL66 - First Number
6A
6 - Second Number
A - Final Letter
Philadelphia, PA
610-647-8070
• Provides greater bearing surface for
fastening soft and brittle facing
materials and oversize facing holes.
• Works well with solft materials, where
the increased flange dia. protects the
integrity of the application.
• 120° countersunk rivets for applications
where fulsh appearance is required.
Safety
Low profile head diameter is twice
the rivet body diameter, providing
adequate bearing surgace for nearly all
appllications.
Open-end offers the broadest selection
of sizes available.
OnSite
Supply
Buttonhead
•
•
Rivet material (A - Aluminum, S - Steel, C - Copper, SS - Stainless Steel)
Style of Head (B - Buttonhead, C - Countersunk)
Large Flange Head
Diameter in 32nd’s
Maximum Grip Length in 16th’s
Mandrel Material (A - Aluminum, S - Stainless Steel) No letter indicates Steel
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Fasteners
Available In
Anchors
Features/ Benefits
Hartford, CT
800-969-0285
63
Rentals
Rivet Type
Strut
Rivets
DO
Anchors
S TIC M AT
LS
Fasteners
ME
A
I
ER
Providing Products to meet the
“BUY AMERICAN” Provisions of
the ARRA Stimulus Program
Strut and Strut Accessories
Strut
Channel
Available in all
Configurations:
Deep, Shallow, Solid,
Back-To-Back, with Holes, Slots
or Knock-outs
Threaded
Rod
Engineered Pipe Hanger Support Systems
Pre-Insulated Supports - Anchors / Slides / Guides
Available in all Finishes:
Plain, Pre- or Hot-Dipped Galvanized,
PVC Coated or Green (Painted)
Available in all Materials:
Pipe
Hangers
Steel, Stainless Steel (Types 304 or
316), Aluminum or Fiberglass
• Engineer and Design per Plans
and Specifications
• Fabricate and Supply
• Detailed Submittals
Lengths:
•
•
•
•
P.E. Stamped Documents and Drawings
Supports Located on Drawings
Pipe Stress Analysis (if required)
Field Walk-Through & Verification
Pipe Hangers and Supports
10 or 20 ft. standard lengths;
Cut-To-Order
Tools
•
•
•
•
•
•
•
•
Beam Clamps
Pipe Clamps
Riser Clamps
Clevis
Threaded Rod
Guides, Shields & Saddles
Concrete inserts
Brackets
Accessories
Abrasives
Strut Clamps, Spring Nuts, Angles,
Splices, Washers, Post Channels, etc.
Available in all Finishes:
Plain, Pre- or Hot-Dipped Galvanized,
PVC Coated or Green (Painted)
Fasteners
•
•
•
•
Heavy Hex Bolts
Hex Nuts
Hex Cap Screws
Washers
Available in all Materials:
OnSite
Supply
Steel, Stainless Steel (Types 304 or
316), Aluminum or Fiberglass
All Materials and Finishes
Firestopping
• Elastomeric
and Silicone
Sealants
• Mortar
• Pillows
• Pads
• Collars
• Wrap Strips
Access Doors
Anchors
Mechanical
• Wall Access Doors - Rated
or Non-Rated / Prime
Coated or Stainless Steel
• Duct Access Doors
• Roof Hatches
• Floor Doors
Wedge Anchors, DropIns, Studs
Safety
Carbon Steel, Galvanized, Stainless Steel (Type 304 and 316)
Adhesive
Acrylic and Epoxy Adhesives
Rentals
64
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Strut
Anchors
Quick Reference
Vertigo
™
Hybrid Fasteners. . . . . . . . . . 122
Overhead Fastening . . . 123 - 124
"Powers" Powder Actuated Tools
. . . . . . . . . . . . . . . . . . . . . . 118
RAMSET Powder
Powder Actuated Fasteners
. . . . . . . . . . . . . . . . . 121 Powder Fastening Tools . . . . .
Powder Loads . . . . . . . . . . . .
Powder Tools For Overhead
122
119
120
123
Pipe
Hangers
Tools
Powder Actuated Fastening
Abrasives
SAMMY SUPER SCREW
Bang-It™/Wood-Knocker™ . . . . 87
Cracked/Uncracked Concrete
Approved
. . . . 68 -73, 89, 91, 98, 101, 104
Expansion Shield Anchors 104-105
Hollow-Set™ Drop-In Anchors 90, 105
Hollow Wall Anchors . . 105 - 110
Mechanical Anchor Selection
Guide . . . . . . . . . . . . . . . 66 - 67
Power-Bolt™ Sleeve Anchors 86
Powers® Sleeve Anchors . . . . . 84
Powers® Wedge-Bolt™ . . . . 72, 88
Powers® Wedge Anchors 68 - 70, 82
Powers® Dropin™ Anchors 90 - 91
Powers® Hollow-Set™ Anchors 90, 105
Red Head® LDT Anchors . . . . . 89
Red Head® Sleeve Anchors . . . . 85
Red Head® Wedge Anchors 71, 83
Red Head Multi-Set Drop-in
Anchors . . . . . . . . . . . . . . . . . . 92
Sammys™ Threaded Rod
Anchoring . . . . . . . . . . . . 94 - 97
Gas Fastening Systems
POWERS
STICK-E Tools . . . . . . . 111 - 114
STICK-E Accessories . . . . . . . 115
Gas Drywall Track Tools 116 - 117
OnSite
Supply
Mechanical Anchoring
Seismic/Cracked Concrete Anchors
. . . . . . .68 - 75, 80, 91, 101, 104
Spike® Pre-Expanded Anchors 102
Tapcon® Screw Anchor . . . . . . 100
Tapper® Screw Anchors . . . . . 101
Threaded Rod Anchoring
93
Vertigo™ Threaded Rod Anchoring
. . . . . . . . . . . . . . . . . . . . . . . . 98 - 99
Zamac/Nylon Nailin® Anchors 103
RAMSET
Gas Fastening for Electrical and
Mechanical Trades . . . 111 - 112
Gas Drywall Track Tools . . . . . 117
T3 Tool Accessories . . . . . . . 113
Safety
Acrylic/Adhesive Anchoring 74 - 80
Epoxy/Adhesive Anchoring.74 - 80
Epoxy / Cracked Concrete
Approved . . . . . . . . . . . . 74 - 80
Epoxy/Acrylate Anchoring 74 - 80
Threaded Anchoring Rod &
Square Plate Washers (For Epoxy
Anchors) . . . . . . . . . . . . . . . . . 81
Mechanical Anchoring
Rentals
Adhesive / Epoxy Anchoring
Threaded
Rod
Anchors
Fasteners
Mechanical Anchor Selection Guide
Page
Item Name
Use In
Material/Finish
Sizes
Anchors
Strut
Wedge
Anchor
Concrete or Stone
Zinc Plated, Galvanized Steel
304 & 316 Stainless Steel
¼" to 1¼"dia
1¾” to 12” O.L.
6, 7, 18
Sleeve
Anchor
Concrete, Brick, Stone
Grout Filled/Hollow Block
Zinc Plated Carbon Steel
304 Stainless Steel
½" to ¾" dia
Up to 6¼” O.L.
8
Power-Bolt
Concrete, Brick, Stone
Grout Filled/Hollow Block
Zinc Plated Carbon Steel
304 Stainless Steel
¼" to ¾" dia
Up to 8¼” O.L.
10, 11
Wedge Bolt
LDT Anchors
Concrete, Stone or Brick
Zinc Plated, Galvanized Steel
410 Stainless Steel
¼" to ¾" dia.
1¼” to 15” O.L.
8, 9
Drop-Ins
Concrete or Stone
Zinc Plated Carbon Steel
304 & 316 Stainless Steel
¼ -20 to ¾ - 4.5
UNC Thread
11
Snake™
Anchor
Concrete
Zinc Plated Carbon Steel
¼" to ¾" dia.
UNC Thread
22
Hollow Set
Drop-In
Hollow Concrete Block,
Brick, Hollow Core Plank
Zamac Alloy Body w/ Carbon Steel
¼" to 5/8" dia.
or 304 Stainless Steel Cone
21
Screw Lead
Anchors
Normal Weight Concrete
Concrete Masonry, Brick
Soft Metal (Lead Alloy)
#6 - #18 Screw
¾" to 1½" L.
22
Calk-In
Anchors
Concrete, Block, Brick,
Hollow Concrete Masonry
Antimonial Lead Alloy
Zamac Alloy Cone
#8 screw - ½" dia.
UNC Thread
19
Spikes
(Rawl Spike)
Normal Weight Concrete
Ltwt Concrete, CMU
Zinc Plated Carbon Steel
316 Stainless Steel
3
/16" to ½" dia.
1"- 6½" O.L.
20
Zamac Nail Drive
Anchors
Concrete, Brick,
Hollow Masonry, Stone
Zamac Alloy or Nylon Body
Carbon or Stainless Steel Nail
24
Plastic
Conicals
Hollow Wall, Drywall
Brick, Block or Concrete
Engineered Plastic
3
/16" to ¼" dia.
¾"- 1½" O.L.
21
Single Shell
Expansion Anchor
Concrete, Block,
Brick or Stone
Zamac Alloy
¼" x ¾" dia.
UNC Thread
21
Double Shell
Expansion Anchor
Solid Concrete, Block
Brick or Stone
Zamac Alloy
¼" x ¾" dia.
UNC Thread
17
Screw Anchor
(Tapcon™/Tapper®)
Concrete, Brick, Block
Concrete Masonry
Zinc Plated, Perma-Seal Steel
410 or 304 Stainless Steel
3
/16" to 3/8" dia.
1¼"- 6" O.L.
25
Toggler™ /
Pop-Toggle™
Plywood, Drywall
Plaster, Fiberglass
Engineered Plastic
#6 - #14 Screw
1
/8"x ¾" Wall Thk
25
SnapToggler™
Strap-Toggle™
Hollow Wall, Drywall
Brick, Block
Carbon Steel, Stainless Steel
Engineered Plastic
/8" - 9 ½"
Grip Range
23
Toggle Bolts
Combo Head
Hollow Block, Wall Board
Plaster
Steel/Stainless Steel
1
25
Molly Bolts/
Polly Anchors
Hollow Wall, Drywall
Brick, Block
Steel
1
E-Z Anchor™
Drywall
Plastic, Steel
Wood Knocker
Concrete, Ltwt Concrete
Carbon Steel & Plastic
¼" to ¾"
16
Bang-It
Concrete, Ltwt Concrete
Carbon Steel & Plastic
¼" to ¾"
12-15
Vertigo®/
Sammy’s®
Steel, Wood, Concrete
Carbon Steel
¼" to ½"
Wall-Dog™
Wallboard, Plywood
Case Hardened Steel
3
Threaded
Rod
4, 5
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
24
16
Safety
24
Rentals
66
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
/16" to ¼" dia.
/8"- 6" O.L.
3
7
3
/8" to 1/2"
/8" x 1¾"
Washington D.C.
877-419-2755
#6, #8, #10
Screw Dia.
/16" to 1¼"
Philadelphia, PA
610-647-8070
n n n
n n
n n
n n
n n n n n
Anchors
Strut
1-1/4"
n n
1-3/16"
1"
n n n
11/16"
1/2"
3/8"
n
1/4"
n
3/16"
3/4"
n n n
5/8"
1/2"
3/8"
1/4"
Hollow Precast
l l l n
Cindercrete
Metal Pan Deck
Tip/Drill
Diameter (ANSI)
Poured Concrete
n Characteristics / Sizes
Rod
Sizes
Wood
o Slow / High / Difficult
Base
Material
Metal
m Medium / Average
Concrete
l Fast / Low / Easy
Industrial
Factors
Installation Ease
Legend
Cost of Installed Product
Performance Data
Speed of Installation
Fasteners
Mechanical Anchor Selection Guide
m l l n
Cast-In Place Solutions
Pipe Spike
Pipe
Hangers
m l l n
n
m l m
Specialty Solutions
n
Hollow-Set Drop-In
m m m n
n n n n n
Rod Hanger Lock-Bolt
m m m n
n n n n
n n n
m m m n
High Labor, Old Style Solutions
n
Bang-It
Mini Drop-In
Tools
l l l
Wood Knocker
n n n n n
n
n
n
n
Steel Drop-In
o o o n
Double Expansion
o o o n
n n n n n n
n
n
Single Expansion
o o o n
n
n
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
n n n n n
Abrasives
Concrete Vertigo
n n n n n
Boston , MA
800-645-6155
n
OnSite
Supply
l l l
Hartford, CT
800-969-0285
n
67
Safety
Wood Vertigo
Rentals
Steel Vertigo
Threaded
Rod
High Speed Solutions
Fasteners
Seismic / Tension Zone anchors
Hilti "TZ" Equivalents —
TESTED
TO
MEET
IBC
2006
Cracked Concrete Approved /
Category 1
Anchors
WHY are different style WHEN do you need the How do you order the
new style anchors:
new design anchors:
anchors needed:
Strut
Threaded
Rod
In 2003 the International Building
Code (IBC) introduced state-of-the-art
requirements for design, testing and
evaluation of concrete anchors. The
BUILDING CODE serves as the basic
"ROADMAP" that an engineer uses
to design the structure. The previous codes did NOT directly address
post-installed anchoring applications in
reinforced concrete. The new 2003 and
2006 codes do address this new anchor
design requirement.
If the IBC code in effect for your job is
updated to the 2003 or 2006 Code you
are required to use the new design style
"Cracked Concrete" Anchor.
TESTED
TO
MEET
IBC
2006
Give your sales rep the specification,
the IBC code year of your project, or
that you need to use the "Cracked Concrete" Design Anchors. We will provide
you with the appropriate anchor. Currently these products are available from
either RED HEAD, POWERS, SIMPSON
or USP/COVERT. Availability is subect to
approvals conforming to the 2003 IBC
SECTION ACI-318 Appendix D.
LOOK to the following pages for
Pipe
Hangers
ICC-ES LISTED
2006 Code Compliant Solutions
CRACKED AND UNCRACKED CONCRETE
Tools
Complete performance values and specifications are immediately available to help you comply
with the new IBC Codes. Please contact your NEFCO Representative for more information
Anchor Size
(Drill Dia.)
Abrasives
Hilti® Equivalents:
OnSite
Supply
Powerstud +SD2: Compare to
Kwik Bolt TZ Anchors
Power-Stud+™ SD2 Wedge Anchors
Safety
• Fully threaded, torque-controlled, wedge expansion
anchor.
• Designed for consistent performance in cracked and
uncracked concrete.
• Suitable base materials: Normal-Weight Concrete,
Structural sand-lightweight concrete and concrete over
metal deck.
• Manufactured with a zinc plated carbon steel body and
stainless steel expansion clip for premium performance.
• Nominal drill bit size is the same as the anchor diameter.
Rentals
68
Hartford, CT
800-969-0285
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Boston , MA
800-645-6155
3"
3-1/2"
3-3/4"
5"
3-3/4"
4-1/2"
5-1/2"
7"
8-1/2"
4-3/4"
5"
6"
7"
8-1/2"
5-1/2"
6-1/4"
7"
8-1/2"
Thread
Length
1-7/8"
2-3/8"
2-5/8"
3-7/8"
2-3/8"
3-1/8"
4-1/8"
5-5/8"
7-1/8"
3-1/2"
4-1/2"
5-1/2"
7"
3-5/8"
4-3/8"
5-1/8"
6-5/8"
Min.
Std.
Embed. Box
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
Washington D.C.
877-419-2755
50
50
50
50
50
50
50
25
25
25
25
25
25
25
20
20
20
10
P/N
SD2
7413SD2
7414SD2
7415SD2
7416SD2
7422SD2
7423SD2
7424SD2
7426SD2
7427SD2
7435SD2
7433SD2
7434SD2
7436SD2
7438SD2
7442SD2
7444SD2
7446SD2
7448SD2
Philadelphia, PA
610-647-8070
Fasteners
Seismic / Tension Zone anchors
Anchors
Hilti® Equivalents:
Powerstud +SD1: Compare to
Hilti® Kwik Bolt 3 (Kwik Bolt 3 is
NOT ICC-ES Approved)
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
100
100
100
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
7400SD1
7402SD1
7404SD1
7410SD1
7412SD1
7413SD1
7414SD1
7415SD1
7416SD1
7417SD1
7420SD1
7422SD1
7423SD1
7424SD1
7426SD1
7427SD1
7428SD1
7429SD1
7430SD1
7432SD1
7433SD1
7434SD1
7436SD1
7438SD1
7439SD1
7437SD1
Anchor Size
(Drill Dia.)
3/4" x 4-1/4"
3/4" x 4-3/4"
3/4" x 5-1/2"
3/4" x 6-1/4"
3/4" x 7"
3/4" x 8-1/2"
3/4" x 10"
3/4" x 12"
7/8" x 6"
7/8" x 8"
7/8" x 10
1" x 6"
1" x 9"
1" x 12"
1-1/4" x 9"
1-1/4" x 12"
Thread
Length
2-3/8"
2-7/8"
3-5/8"
4-3/8"
5-1/8"
6-5/8"
8-1/8"
10-1/8"
2-3/4"
4-3/4"
6-3/4"
2-3/8"
5-3/8"
8-3/8'
4-3/4"
7-3/4"
P/N
SD1
Min.
Std.
Embed. Box
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-7/8"
3-7/8"
3-7/8"
4-1/2"
4-1/2"
4-1/2"
5-1/2"
5-1/2"
20
20
20
20
20
10
10
10
10
10
10
10
10
5
5
5
7440SD1
7441SD1
7442SD1
7444SD1
7446SD1
7448SD1
7449SD1
7451SD1
7450SD1
7452SD1
7454SD1
7461SD1
7463SD1
7465SD1
7473SD1
7475SD1
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Threaded
Rod
3/4"
1-1/4"
2-1/4"
1-1/4"
1-5/8"
1-7/8"
2-3/8"
2-5/8"
3-7/8"
5-7/8"
1-3/8"
2-3/8"
3-1/8"
4-1/8"
5-5/8"
7-1/8"
2"
3"
3-1/2"
4-1/2"
5-1/2"
7"
8-1/2"
• Fully-threaded, torque-controlled wedge expansion
anchor.
• Consistent performance in cracked or uncracked
concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• Zinc plated carbon steel body, expansion clip, nut and
washer.
• Nominal drill bit size is the same as the anchor diameter.
P/N
SD1
Pipe
Hangers
1/4" x 1-3/4"
1/4" x 2-1/4"
1/4" x 3-1/4"
3/8" x 2-1/4"
3/8" x 2-3/4"
3/8" x 3"
3/8" x 3-1/2"
3/8" x 3-3/4"
3/8" x 5"
3/8"x 7"
1/2" x 2-3/4"
1/2" x 3-3/4"
1/2" x 4-1/2"
1/2" x 5-1/2"
1/2" x 7"
1/2" x 8-1/2"
1/2" x 10"
1/2" x 12"
5/8" x 3-1/2"
5/8" x 4-1/2"
5/8" x 5"
5/8" x 6"
5/8" x 7"
5/8" x 8-1/2"
5/8" x 10"
5/8" x 12"
Min.
Std.
Embed. Box
Tools
Thread
Length
Abrasives
Anchor Size
(Drill Dia.)
Strut
Power-Stud™+SD1 Wedge Anchors
OnSite
Supply
See page 82 for Stainless Steel and Galvanized Power-Stud™
Accessories
Part No.
08280
Description
Hand Pump/Dust Blower
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Adjustable Torque Wrench
Safety
• For proper hole cleaning after drilling
• Removes concrete dust and debris
• 1/2" Square Drive
Part No.
08465
08466
Boston , MA
800-645-6155
Description
Adjustable Torque Wrench, 10-150 ft.-lbs.
Adjustable Torque Wrench, 25-250 ft.-lbs.
Hartford, CT
800-969-0285
69
Rentals
Hand Pump/Dust Blower
Fasteners
Seismic / Tension Zone anchors
Anchors
Power-Stud™+SD4 Wedge Anchors
304 Stainless Steel Bolt and Clip
Power-Stud™+SD6 Wedge Anchors
316 Stainless Steel Bolt and Clip
Strut
• Fully-threaded, torque-controlled wedge expansion anchor.
• Consistent performance in cracked or uncracked concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• 304 Stainless Steel body, expansion clip, nut and washer.
• Nominal drill bit size is the same as the anchor diameter.
Threaded
Rod
Anchor Size
(Drill Dia.)
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
1/4" x 1-1/2"
1/4" x 2-1/4"
1/4" x 3-1/4"
3/8" x 2-1/4"
3/8" x 2-3/4"
3/8" x 3"
3/8" x 3-1/2"
3/8" x 3-3/4"
3/8" x 5"
1/2" x 2-3/4"
1/2" x 3-1/2"
1/2" x 4-1/2"
1/2" x 5-1/2"
1/2" x 7"
5/8" x 3-1/2"
5/8" x 4-1/2"
5/8" x 5"
5/8" x 6"
5/8" x 7"
5/8" x 8-1/2"
3/4" x 4-1/4"
3/4" x 4-3/4"
3/4" x 5-1/2"
3/4" x 6-1/4"
3/4" x 7"
3/4" x 8-1/2"
3/4" x 10"
7/8" x 8"
1" x 6"
1" x 9"
1" x 12"
Thread
Length
3/4"
1-1/4"
2-1/4"
1-1/4"
1-5/8"
1-7/8"
2-3/8"
2-5/8"
3-7/8"
1-3/8"
2-3/8"
3-1/8"
4-1/8"
5-5/8"
2"
3"
3-1/2"
4-1/2"
5-1/2"
7"
2-3/8"
2-7/8"
3-5/8"
4-3/8"
5-1/8"
6-5/8"
8-1/8"
4-3/4"
2-3/8"
5-3/8"
8-3/8'
Min.
Std.
Embed. Box
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-7/8"
4-1/2"
4-1/2"
4-1/2"
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
P/N
SD4
7300SD4
7302SD4
7304SD4
7310SD4
7312SD4
7313SD4
7314SD4
7315SD4
7316SD4
7320SD4
7322SD4
7323SD4
7324SD4
7326SD4
7330SD4
7332SD4
7333SD4
7334SD4
7336SD4
7338SD4
7340SD4
7341SD4
7342SD4
7344SD4
7346SD4
7348SD4
7349SD4
7352SD4
7361SD4
7363SD4
7365SD4
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Rentals
70
Hartford, CT
800-969-0285
• Fully-threaded, torque-controlled wedge expansion anchor.
• Consistent performance in cracked or uncracked concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• 316 Stainless Steel body, expansion clip, nut and washer.
• Nominal drill bit size is the same as the anchor diameter.
Anchor Size
(Drill Dia.)
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1-3/4"
2-1/4"
3-1/4"
2-1/4"
2-3/4"
3"
3-1/2"
3-3/4"
5"
2-3/4"
3-3/4"
4-1/2"
5-1/2"
7"
3-1/2"
4-1/2"
5"
6"
7"
8-1/2"
4-1/4"
4-3/4"
5-1/2"
6-1/4"
7"
8-1/2"
Thread
Length
3/4"
1-1/4"
2-1/4"
1-1/4"
1-5/8"
1-7/8"
2-3/8"
2-5/8"
3-7/8"
1-3/8"
2-3/8"
3-1/8"
4-1/8"
5-5/8"
2"
3"
3-1/2"
4-1/2"
5-1/2"
7"
2-3/8"
2-7/8"
3-5/8"
4-3/8"
5-1/8"
6-5/8"
Min.
Std.
Embed. Box
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
P/N
SD4
7600SD5
7602SD5
7604SD5
7610SD5
7612SD5
7613SD5
7614SD5
7615SD5
7616SD5
7620SD5
7622SD5
7623SD5
7624SD5
7626SD5
7630SD5
7632SD5
7633SD5
7634SD5
7636SD5
7638SD5
7640SD5
7641SD5
7642SD5
7644SD5
7646SD5
7648SD5
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Power-Stud™+SD4
and
Power-Stud +SD6
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Hilti® Equivalents:
Hilti®
Equivalents:
Strong-Bolt : Compare to
Kwik Bolt TZ Anchors
™
Strong-Bolt™ Wedge Anchors
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
x
x
x
x
x
x
x
x
x
x
x
x
Thread Max Fixture. Std.
Part
Length
Thickness Box Number
3"
3-3/4"
5"
3-3/4"
4-1/4"
4-1/2"
5-1/2"
7"
5"
6"
7"
8-1/2"
1-5/8"
2-3/8"
3-5/8"
2-1/8"
2-5/8"
2-7/8"
3-7/8"
5-3/8"
3-3/16"
4-3/16"
5-3/16"
5-3/4"
5/8"
1-3/8"
2-5/8"
3/4"
1-1/4"
1-1/2"
2-1/2"
4"
1-1/8"
2-1/8"
3-1/8"
4-5/8"
50
50
50
25
25
25
25
25
25
25
25
25
CWS3830
CWS3836
CWS3850
CWS1236
CWS1242
CWS1244
CWS1254
CWS1270
CWS5850
CWS5860
CWS5870
CWS5884
Industrial Grade SDS Bits Value Paks
See Pages 321 - 323 in Our Tool Section for a Complete
Selection of Carbide Masonry Bits
5/32
3/16
3/16
3/16
3/16
7/32
7/32
7/32
x
x
x
x
x
x
x
x
4
2
4
6
8
4
6
8
x
x
x
x
x
x
x
x
6
4
6
8
10
6
8
10
Philadelphia, PA
610-647-8070
Part No.
Std
Box
Carton
0801
0803
0805
0807
0809
0811
0813
0815
25
25
25
25
25
25
25
25
500
450
500
450
300
500
450
300
Washington D.C.
877-419-2755
Fasteners
Threaded
Rod
See page 83 for standard
Trubolt® Wedge Anchors
*3/4" and 1" diameter Strong-Bolt Wedge Anchors are Code Listed
ICC-ES ESR-1771 Category 2.
Size (In)
Dia. x U.L. x O.L.
Pipe
Hangers
Anchor
Size
Tools
25 STB50334
25 STB50414
25 STB50512
25 STB50700
25 STB50812
25 STB50100
20 STB62412
20 STB62500
20 STB62600
20 STB62700
20 STB62812
10 STB62100
10 STB75512
10 STB75614
10 STB75700
10 STB75812
10 STB75100
5 STB10700
5 STB101000
5 STB1013000
1/2"
5/8"
5/8"
1"
Abrasives
2-5/16"
2-13/16"
4-1/16"
5-9/16"
6"
6"
2-7/8"
3-3/8"
4-3/8"
5-3/8"
6"
6"
3-5/8"
4-3/8"
5-1/8"
6"
6"
3-1/2"
3-1/2"
3-1/2"
Drill Bit Std.
Part
Diameter Box Number
Size (In)
Dia. x U.L. x O.L.
1/4 x 2 x 4
1/4 x 4 x 6
1/4 x 6 x 8
1/4 x 8 x 10
5/16 x 4 x 6
3/8 x 4 x 6
1/2 x 4 x 6
5/8 x 6 x 8
Boston , MA
800-645-6155
Part No.
Std
Box
Carton
0817
0819
0821
0823
0825
0827
0829
0831
25
25
25
25
25
25
15
15
450
500
450
300
500
300
180
120
Hartford, CT
800-969-0285
71
OnSite
Supply
1/2" x 3-3/4"
1/2" x 4-1/4"
1/2" x 5-1/2"
1/2" x 7"
1/2" x 8-1/2"
1/2" x 10"
5/8" x 4-1/2"
5/8" x 5"
5/8" x 6"
5/8" x 7"
5/8" x 8-1/2"
5/8" x 10"
*3/4" x 5-1/2"
*3/4" x 6-1/4"
*3/4" x 7"*
*3/4" x 8-1/2"
*3/4" x 10"
*1" x 7"
*1" x 10"
*1" x 13"
• Used to install pipe, structural or non-structural
equipment that is subject to seismic forces or installed
in the tension zones of cracked and uncracked concrete.
• Constructed of a high-strength threaded stud body,
expansion clip, nut and washer. Anchor bodies are made
of plated carbon steel. The expansion clip consists of a
split cylindrical ring with undercutting grooves.
• Drill bit diameter is the same as the anchor diameter.
Safety
Thread
Length
Trubolt® + Siesmic Wedge Anchors
Rentals
Anchor
Size
Strut
Trubolt™+:
Compare to
Kwik Bolt TZ
Anchors
• A wedge anchor specifically designed for optimum
performance in both cracked and uncracked concrete
• Fits most fixtures and installs with common drill bits
sizes and tools.
• Installs like a standard wedge anchor: No need for
special bits or installation tools.
• Zinc-plated, carbon-steel stud with 316 stainless steel clip
Anchors
Seismic / Tension Zone anchors
Fasteners
Seismic / Tension Zone anchors
Anchors
Wedge-Bolt™+ Anchors
Hilti® Equivalents:
Wedge-Bolt+ Blue Tip - designed to be used
with a matched tolerance Wedge-Bit™ for optimum performance. The Wedge-Bolt™ works in
fixture clearance holes that are 1/16" over nominal, which is typical of standard fixture holes
used in steel fabrication. Wedge-Bolts®+ must
be installed using Wedge-Bits™
Wedge-Bolt™+: Compare to HUS-H
Screw Anchors (HUS-H anchors are
NOT ICC-ES Approved)
Anchor Materials:
Zinc plated Carbon Steel body, Hex head
Size Range:
¼" dia. (Uncracked Concrete), 3⁄8"
dia. through ¾" dia. (Cracked and
Uncracked Concrete), Grouted CMU
Suitable Base Materials:
Normal weight concrete, Structural
sand-lightweight concrete, Concrete
over steel deck
Strut
• The Wedge-Bolt+ anchor is a one piece,
heavy duty screw anchor with a finished
hex head. It is simple to install, easy to
identify and fully removable.
• Designed for consistent and reliable
performance in cracked and uncracked
concrete.
Threaded
Rod
Pipe
Hangers
Tools
Wedge
Min.
Size
(Inch)
Bit Dia. Embed.
1/4 x 1-1/4
1/4"
—
1/4"
—
1/4 x 1-3/4
1/4"
1-3/4"
1/4 x 2-1/4
1/4"
1-3/4"
1/4 x 3
3/8 x 1-3/4
3/8"
—
3/8 x 2-1/2
3/8"
2-1/8"
3/8 x 3
3/8"
2-1/8"
3/8"
2-1/8"
3/8 x 4
3/8 x 5
3/8"
2-1/8"
3/8 x 6
3/8"
2-1/8"
1/2 x 2-1/2
1/2"
—
1/2"
2-1/2"
1/2 x 3
1/2 x 4
1/2"
2-1/2"
1/2 x 5
1/2"
2-1/2"
1/2 x 6
1/2"
2-1/2"
1/2 x 6-1/2
1/2"
2-1/2"
1/2 x 8
1/2"
2-1/2"
Std
Box
100
100
100
100
50
50
50
50
50
50
50
50
50
25
25
25
25
Carbon Mechanically
Steel
Galvanized
—
7204SD
—
7206SD
—
7208SD
—
7210SD
—
7220SD
—
7222SD
—
7224SD
7226SD
7726SD
7228SD
7728SD
7230SD
7730SD
—
7242SD
—
7244SD
7745SD
7246SD
7248SD
7748SD
7250SD
7750SD
7268SD
7751SD
7252SD
7752SD
Wedge
Min.
Size
(Inch)
Bit Dia. Embed.
5/8 x 3
5/8"
2-1/2"
5/8"
3-1/4"
5/8 x 4
5/8 x 5
5/8"
3-1/4"
5/8 x 6
5/8"
3-1/4"
5/8"
3-1/4"
5/8 x 6-1/2
5/8 x 8
5/8"
3-1/4"
3/4 x 4
3/4"
—
3/4"
4-1/4"
3/4 x 5
3/4"
4-1/4"
3/4 x 6
3/4 x 8
3/4"
4-1/4"
3/4"
4-1/4"
3/4 X 8-1/2
3/4 x 10
3/4"
4-1/4"
Std
Box
25
25
25
25
50
25
20
20
20
10
20
10
Carbon Mechanically
Steel
Galvanized
—
7260SD
—
7262SD
7764SD
7264SD
7766SD
7266SD
—
7768SD
7270SD
7770SD
—
7282SD
—
7284SD
7286SD
7786SD
7288SD
—
7789SD
7290SD
7790SD
Anchor size includes the diameter and the length of the anchor measured under the head.
See page 88 for more Wedge Bolt Styles
Abrasives
Wedge-Bits™
SDS-Max Wedge-Bit™
An integral part of the Wedge-Bolt+ Anchor System and is
required for use with Wedge-Bolt+™ Blue Tip Anchors.
OnSite
Supply
SDS-Plus Wedge-Bit
™
Usable/Overall
Size Lengths
Part
No.
1312
1314
1316
1318
1332
1320
1322
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
72
Part
No.
Safety
2" / 4"
4" / 6"
4" / 6"
6" / 8"
10" / 12"
4" / 6"
8" / 10"
1334
1324
1326
1336
1328
1330
Usable/Overall
Size Lengths
1/2"
5/8"
5/8"
5/8"
3/4"
3/4"
Rentals
Hartford, CT
800-969-0285
10" / 12"
6" / 8"
10" / 12"
16" / 18"
6" / 8"
10" / 12"
Part
No.
Usable/Overall
Size Lengths
1354
1356
1358
1/2"
5/8"
3/4"
8" / 13"
8" / 13"
8" / 13"
Spline Wedge-Bit™
Part
No.
1340
1342
1344
1348
Boston , MA
800-645-6155
Usable/Overall
Size Lengths
1/2"
1/2"
5/8"
1/2"
HD Straight Shank
Wedge-Bit™
Part
No.
1370
1372
1380
1384
1390
1390
1396
1397
Usable/Overall
Size Lengths
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
5/8"
3/4"
2-¾" / 4"
4" / 6"
4" / 6"
11" / 13"
4" / 6"
11" / 13"
11" / 13"
11" / 13"
8" / 13"
11" / 16"
8" / 13"
8" / 13"
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
2-3/4"
4-1/2"
4"
5-3/4"
4"
5-3/4"
5"
6-3/4"
6-3/4"
8-1/2"
2-3/4"
4-1/2"
4"
4-1/2"
13"
13"
5"
6-3/4"
6-3/4"
8-1/2"
Part Number
3-1/8"
3-1/8"
4-3/8"
4-3/8"
4-3/8"
4-3/8"
5-3/8"
5-3/8"
7-1/8"
7-1/8"
5-1/8"
5-1/8"
8-1/8"
8-1/8"
9-5/8"
9-5/8"
5"
6-3/4"
10"
11-3/4"
DUC38-275L
DUC38-275LT
DUC38-400H
DUC38-400H
DUC12-400T
DUC12-400LT
DUC12-500T
DUC12-500HT
DUC12-675T
DUC12-675HT
DUC58-450L
DUC58-450LT
DUC38-750H
DUC38-750HT
DUC38-900H
DUC38-900HT
DUC34-500T
DUC34-500HT
DUC34-1000T
DUC34-1000HT
DUC Undercut Anchors
Hilti® Equivalents:
DUC Undercut Anchor: Compare
to HDA Undercut Anchors
• Consists of a threaded stud, a thick walled expansion
sleeve, an expander coupling and a nut and washer.
• Installed into a pre-drilled hole created using the DUC
Undercutting Bit which fits into SDS or SDS-Max rotary
hammer drills and guarantees the correct angle of the
reverse cone.
• Installation is simple. No coring drills are necessary.
Creation of proper undercut is correctly done and
easily verified using DUC undercut bits.
Part
Drilling Depth
Lock Release
Spanner Position
Fasteners
5/8" x 6"
5/8" x 6"
5/8" x 7-1/2"
5/8" x 7-1/2"
3/4" x 7-1/2"
3/4" x 71/2"
3/4" x 8-1/2"
3/4" x 8-1/2"
3/4" x 10-1/4"
3/4" x 10-1/4"
1" x 8-3/8"
1" x 8-3/8"
1" x 11-3/8"
1" x 11-3/8"
1" x 7-1/2"
1" x 7-1/2"
1-1/8" x 9"
1-1/8" x 9"
1-1/8" x 14"
1-1/8" x 14"
Depth
Strut
Length
Threaded
Rod
Size
Pipe
Hangers
Anchors
Seismic / Tension Zone Anchors
Cutter Blade
Carbide Tip
Bow Jaw
Size
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
x
x
x
x
x
x
x
x
x
x
Part No.
6"
03100SD
6" ET
03102SD
7-1/4
03104SD
7-1/4" ET 03106SD
7-1/8"
03108SD
7-1/8" ET 03110SD
8-3/8"
03112SD
8-3/8" ET 03114SD
10-1/8" 03116SD
10-1/8" ET 03118SD
Philadelphia, PA
610-647-8070
Drill
Depth
Impact
Energy
5/8"
SDS
9"
1.6 ft-lbs.
3/4"
SDS
10-1/4"
2.5 ft.-lbs.
1"
SDS
12-1/4"
3.2 ft.-lbs.
1-1/8"
SDS-Max
13-1/2"
4.0 Ft.-lbs.
1-1/8"
SDS-MAx
29-1/2"
4.0 ft.-lbs.
Size
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
x
x
x
x
x
x
x
x
x
x
UBC Series
Undercut Drill Bits
Undercutting bits fit into either SDS
or SDS-Max rotary hammer drills
and guarantees the correct angle of
the reverse cone. Creation of proper
undercut is correctly done and takes
only seconds.
Part No.
8"
03120SD
8" ET
03122SD
11
03124SD
11" ET
03126SD
12-1/2" 03128SD
12-1/2" ET 03130SD
8-1/2"
03132SD
8-1/2" ET 03134SD
13-1/2" 03116SD
3-1/2" ET 03118SD
Washington D.C.
877-419-2755
Tools
Shank
Type
Boston , MA
800-645-6155
Abrasives
DUC38-275L
DUC38-400H
DUC12-400L
DUC12-500H
DUC58-450L
DUC58-750H
DUC -58-900H
DUC34-500L
DUC34-1000H
DUC34-500L
DUC34-1000H
Dia.
OnSite
Supply
UCB58
UCB34
UCB100
UCB118
UCB118L
Used
w/ Anchors
Atomic
Undercut™ Anchors
Arriving Fall of 2010
Undercutting anchor for top
performance in cracked and
uncracked concrete
Hartford, CT
800-969-0285
73
Safety
Part
No.
Stopper Sleeve
Rentals
Lock Release Screw
Fasteners
Seismic / Tension Zone - adhesive anchors
COMPARE TO: Red Head A7 and Hilti® HY150 MAX:
Anchors
08437
08479
08484
Strut
08495
08494
Threaded
Rod
AC100+ Gold Epoxy Acrylate
Accessories
Dispensing Tools for Injection Adhesion
Part No.
Pipe
Hangers
Tools
08437
08479
08484
08485
08485SD
08494
08495
Description
Vinylester Injection Adhesive Anchoring System
Box
Manual caulking gun for Push-Pak
and Quik-Shot
High Performance caulking gun for
Push-Pak and Quik-Shot
AC100+ Gold standard all-metal
manual tool
AC100+ Gold 8 oz., 10 oz., & 12 oz.
high performance manual tool
AC100+ Gold 8 oz., 10 oz., & 12 oz.
standard all-metal manual tool
AC100+ Gold 29 oz. standard
all-metal manual tool
AC100+ Gold 29 oz.
high performance manual tool
1
1
The AC100+ Gold is a two-component adhesive anchoring
system. System includes injection adhesive cartridges, mixing nozzles, dispensing tools and hole cleaning equipment.
The AC100+ Gold is designed for bonding threaded rod
and reinforcing bar hardware into drilled holes in concrete
base materials.
Part No.
1
1
1
1
1
8462SD
8478SD
8480SD
8486SD
8490SD
Abrasives
08496
Description
Box
29 oz. High Performance
Pneumatic Tool
1
Battery Injection Dispensing Tool
Part No.
08444
Description
Box
29 oz. High Performance Battery Tool 1
OnSite
Supply
Adapters & Extensions
Safety
Part No.
Wire Brushes
Rentals
08283
08296
08282
08280
08292
74
Description
SDS-Plus adapter for steel brushes
Standard drill adapter for steel brushes
Steel brush extension, 12"
Hand pump/dust blower
Air compressor nozzle with extension
Hartford, CT
800-969-0285
Gold
Gold
Gold
Gold
Gold
5 fl. oz. Push Pack
10 fl. oz. Quik-Shot
8 fl. oz. dual cartridge
12 fl. oz. dual cartridge
29 fl. oz. dual cartridge
12
12
—
—
—
Accessories
Cartridge System Mixing Nozzles
Part No.
Description
08293
08294
08281
Box
Extra Mixing Nozzle for AC100+ Gold
(5 oz., 8 oz., 10 oz. and 12 oz.
2
Extra Mixing Nozzle with (8" extension)
for AC100+ Gold 29 oz.
2
Mixing Nozzle extension, 8"
2
Please see page 98 for more
Adhesive Anchors Accessories
Powers Hole Cleaning Tools & Accessories
Wire Brushes
AC100+
AC100+
AC100+
AC100+
AC100+
Box
One AC100+ Gold mixing nozzle is packaged with each cartridge.
AC100+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Pneumatic Injection Tool Delivery System
Part No.
Description
Part No.
Wire Brushes
08284
08285
08286
08287
08288
08289
08290
08291
Boston , MA
800-645-6155
for
for
for
for
for
for
for
for
Description
7/16" ANSI Hole (3/8" rod or #3 Rebar)
9/16" ANSI Hole (1/2" rod or #4 Rebar)
11/16" ANSI Hole (5/8" rod or #5 Rebar)
7/8" ANSI Hole (3/4" rod or #6 Rebar)
1" ANSI Hole (7/8" rod or #7 Rebar)
1-1/8" ANSI Hole (1" rod or #8 Rebar)
1-3/8" ANSI Hole (1-1/4" rod or #9 Rebar)
1-1/2" ANSI Hole (#10 Rebar)
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• 24 hour cure time at 70° F
• Fire Rated: tested up to 4 hours
Fire Resistance Period
• High Strength Epoxy
• Works in dry, damp, saturated, and
underwater applications
• Odorless
• Oversized and cored holes
• Resists wind loads
PE1000+ Epoxy
Epoxy Injection Adhesive
Anchoring System
12
EPCON G5 Epoxy Adhesive
Ordering Information
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Part No.
08294
08281
08295
Description
Box
E202 Pneumatic Dispenser
Extra Mixing Nozzle with (8" extension) 2
2
Mixing Nozzle extension, 8"
PE1000+ Heavy Duty dispensing tool 1
Nylon Brushes
• Proper hole cleaning using
a brush is essential for
optimum performance.
B012
B034
B100
B114
B112
Size
Dia.
Std
Box
1/2"
3/4"
1"
1-1/4"
1-1/2"
1
1
1
1
1
Wire Brushes
• Brushes may be used on up
to 50 holes, depending on
concrete strength.
• Brushes required for installation of #4, #8 and larger
rebar are available.
Part
No.
Anchor
Drill Bit
Dia. Rebar Dia.
SB038
SB012
SB058
SB034
SB078
SB010
SB125
ESDS-38
EHAN-38
3/8"
#3
1/2"
–
5/8"
#5
3/4"
#6
7/8"
–
1"
#7
1-1/4" –
12" Extension
12" Extension
Philadelphia, PA
610-647-8070
Brush
Dia
7/16"
5/8"
9/16"
3/4"
3/4"
1"
7/8"
1-1/4"
1"
1-1/2"
1-1/8"
1-5/8"
1-3/8"
1-3/4"
w/ SDS+ Adapter
w/ T-Handle
Washington D.C.
877-419-2755
E102 Hand Dispenser
Red Head G5 22 fl. oz. Cartridge & Accessories
Part No.
Description
G5-22
22 fl.oz. Cartridge, G5
E55
E102
E202
Mixing Nozzle for G5-22. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
Hand Dispenser for G5-22
Pneumatic Dispenser for G5-22
Meets "Buy American" provision in
Stimulus Bill Section 1605
Hand Pump
BP-10
Std
Box
4
4
4
4
4
4
4
1
1
Abrasives
Part
No.
Tools
Red Head Hole Cleaning Tools & Accessories
Hole Plugs
Part
No.
Rod
Dia.
Hole
Dia
Std
Box
E038
E012
E058
E034
E078
E010
E114
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
7/16"
9/16"
3/4"
7/8"
1"
1-1/8"
1-3/8"
25
25
20
20
10
10
10
• Easier overhead
installations,
centers rod
in hole, keeps
adhesive off of
threads.
Boston , MA
800-645-6155
Pipe
Hangers
E55 Mixing Nozzle
Accessories
Hartford, CT
800-969-0285
75
OnSite
Supply
PE1000+ 13 fl. oz. dual cartridge
Threaded
Rod
Box
FULL
CURE TIME
24 hours
24 hours
24 hours
24 hours
Safety
0500SD
Description
BASE MATERIAL
WORKING
(F°/C°)
TIME
110°/ 43°
9 minutes
90°/ 32° 9 minutes
70°/ 20° 15 minutes
50°/ 10° 15 minutes
Rentals
Part No.
Strut
The PE1000+ is a two-component, high
strength adhesive anchoring system.
The system includes injection adhesive
cartridges, mixing nozzles, dispensing
tools and hole cleaning equipment.
The PE1000+ is designed for bonding threaded rod and reinforcing bar
hardware into drilled holes in concrete
base materials.
Fasteners
G5 Epoxy Adhesive
COMPARE TO: Red Head C6
and Hilti® RE500 SD:
Anchors
Seismic / Tension Zone - Adhesive anchoring
Fasteners
Epoxy / Adhesive Anchoring
Chem-Stud™
Hammer-Capsule®
Anchors
Spin-In Type Capsule Adhesive
Drive-In Type Capsule Adhesive
Base Material: Solid Concrete
Size Range: 3/8" to 1-1/4" anchor rod.
Anchor Material: Ester Based Resin
Base Material: Solid Concrete
Size Range: 3/8" to 1" anchor rod.
Anchor Material: Ester Based Resin
Strut
Part
No.
Rod
Size
Drill
Dia.
Std.
Length
Std.
Box
Box
6502
6503
6504
6505
6506
6507
6508
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
7/16"
9/16"
11/16"
7/8"
1"
1-1/8"
1-1/2"
3-1/2"
4-1/4"
5"
6-5/8"
7"
8-1/4"
10-1/4"
10
10
10
5
5
5
5
500
200
200
50
50
50
25
Part
No.
Rod
Size
Drill
Dia.
Std.
Length
Std.
Box
Box
6702
6703
6704
6705
6706
6707
3/8"
1/2"
5/8"
3/4"
7/8"
1"
7/16"
9/16"
11/16"
7/8"
1"
1-1/8"
3-1/2"
4-1/4"
5"
6-5/8"
7"
8-1/4"
10
10
10
5
5
5
500
200
100
50
50
50
Chem-Stud Installation Tools
Epoxy Accessories / Inserts & Tubes
Threaded
Rod
Chem-Stud installation tools consist of a drive adapter which
is designed to fit the rotary hammer drill used and a coupler
to hold either threaded rods or reinforcing bars. The tools for
threaded rod and reinforcing bars are different and can not
be interchanged.
Internally
Threaded Insert
Umbrella Anchor
Umbrella Inserts
Pipe
Hangers
For fastening to the front face of hollow base materials.
Part No.
HBU-38
HBU-FS
Description
Pkg
Umbrella Insert w/Centering Ring
Umbrella Insert w/Centering Ring
w/ 3/8" Internally Threaded Insert
Tools
Nylon Screen Tubes
20
10
Stainless Steel Screen Tubes
Screen Tubes
Abrasives
Screens make it possible to use adhesive for fastening to
hollow block or brick walls. Nylon screens offer 30-50%
lower costs than stainless steel. Their special design makes
them easier to insert through brick or block. Nylon screens
also resist bending and crushing. Both Nylon and Stainless
Steel screens are corrosion resistant.
Rod
Dia.
OnSite
Supply
Safety
Rentals
Screen
Length
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
76
6"
8"
10"
6"
8"
10"
6"
8"
10"
6"
8"
10"
8"
10"
13"
S. Steel
P/N
Box
HB 14-6
HB 14-8
HB 14-10
HB 38-6
HB 38-8
HB 38-10
HB 12-6
HB 12-8
HB 12-10
HB 58-6
HB 58-8
HB 58-10
HB 34-8
HB 34-10
HB 34-13
100
100
100
50
25
25
50
25
25
25
20
20
20
10
10
P/N
Nylon
—
—
—
HBP 38-6
HBP 38-8
HBP 38-10
HBP 12-6
HBP 12-8
HBP 12-10
HBP 58-6
HBP 58-8
HBP 58-10
—
HBP 34-10
HBP 34-13
Hartford, CT
800-969-0285
Box
—
—
—
50
25
25
50
25
25
40
40
40
—
20
20
Couplers for Threaded Rod
Part
No.
Size
Std.
Box
Std.
Carton
6562
6563
6564
6565
6566
6567
6568
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1
1
1
1
1
1
1
10
10
10
5
5
5
5
Drivers for Threaded Rod Couplers - Hex
Part
No.
Hex
Size
Fits
Coupler Size
Std.
Box
Std.
Carton
6570
6572
1/4"
3/8"
3/8" to 5/8"
3/4" to 1-1/4"
1
1
10
10
Drivers for Threaded Rod Couplers - SDS Plus
Part
No.
Hex
Size
Fits
Coupler Size
Std.
Box
Std.
Carton
6574
6576
1/4"
3/8"
3/8" to 5/8"
3/4" to 1-1/4"
1
1
10
10
Drivers for Threaded Rod Couplers - Spline
Part
No.
Hex
Size
Fits
Coupler Size
Std.
Box
Std.
Carton
6580
6582
1/4"
3/8"
3/8" to 5/8"
3/4" to 1-1/4"
1
1
10
10
Drivers for Threaded Rod Couplers - SDS Max
Part
No.
Hex
Size
Fits
Coupler Size
Std.
Box
Std.
Carton
6559
6561
1/4"
3/8"
3/8" to 5/8"
3/4" to 1-1/4"
1
1
10
10
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Hilti® Equivalents:
EPCON A7 Acrylic Adhesive
EPCON A7 Acrylic Adhesive Ordering Information
A7 8 fl. oz. cartridge
Pipe
Hangers
A102 Hand Dispenser
A200 Pneumatic
Dispenser
Red Head A7 28 fl. oz. Cartridge & Accessories
Red Head A7 8 fl. oz. Cartridge & Accessories
Part No.
Part No.
A7 5 fl. oz. cartridge
Abrasives
8 fl.oz. Cartridge
Mixing Nozzle for A7-8. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
Heavy Duty Hand Dispenser for A7-8
A500 Reusable
Plastic Dispenser
A7 10 fl. oz. cartridge
A24 Mixing Nozzle
A501 Reusable
Caulking Gun Adapter
OnSite
Supply
A7-8
A24
A101
A100 Hand Dispenser
Red Head A7 5 fl. oz. Cartridge & Accessories
A24 Mixing Nozzle
Part No.
Red Head A7 10 fl. oz. Cartridge & Accessories
Part No.
A7-10
A24
A100
Philadelphia, PA
610-647-8070
Description
10 fl.oz. Cartridge (includes nozzle)
Mixing Nozzle for A7-10. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
Hand Dispenser for A7-10
Washington D.C.
877-419-2755
A7-5
A500
A501
A500 Kit
A501 Kit
Boston , MA
800-645-6155
Description
5 fl.oz. Cartridge
Reusable plastic dispenser
Reusable caulking gun adapter
Dispensing Kit (incl. (1) A7-5 cartridge, (1)
A500 Dispenser, & (1) A24 Nozzle
Dispensing Kit (incl. (1) A7-5 cartridge, (1)
A501 caulking gun adapter, & (1) A24
Nozzle
Hartford, CT
800-969-0285
77
Safety
28 fl.oz. Cartridge, A7
Mixing Nozzle for A7-28. Nozzle dia.
3/8" to 5/8". Overall length:17"
Hand Dispenser for A7-28
Pneumatic Dispenser for A7-28 cartridge
Description
Rentals
Description
Tools
A101 Heavy Duty
Hand Dispenser
A24 Mixing Nozzle
E55 Mixing Nozzle
A7-28
E55
A102
A200
Strut
• All weather formula, down
BASE MATERIAL
WORKING
FULL CURE
to 0°F & below
TEMP. (F°/C°)
TIME (MIN)
TIME (MIN)
• No drip, no sag, easy cleanup
100°/38°
5
25
• Fast and easy dispensing
80°/27°
5.5
30
• Fast curing times
60°/16°
7
35
• Not mix ratio sensitive for
40°/4°
15
75
maximum consistency
20°/-7°
35
6
(hrs)
• Rods are easier to insert
0°/-18°
4
24
(hrs)
(hrs)
into the hole with A7 compared with other adhesives
• Works in damp holes and underwater applications
• Requires less adhesive — can be used in 1/16" and 1/8" oversized holes
• One formula for both hollow and solid base materials
• NSF 61 approved.
Threaded
Rod
The acrylic resin and hardening agent are completely
mixed as they are simultaneously dispensed from the dual cartridge through a static
mixing nozzle, directly into the anchor hole. A7 can be used with threaded rod or rebar.
Anchors
A7: Compare to HIT-HY 150
and HIT-ICE Adhesive
Fast Dispensing, Fast Curing From 0°F to 120°F
A7 28 fl. oz. cartridge
Fasteners
Acrylic Adhesive anchoring
Pipe
Hangers
Tools
WORKING
TIME (MIN)
FULL CURE
TIME (HRS)
4
5
7
10
20
45
1
1
1
2
24
32
120°/49°
90°/32°
70°/20°
60°/16°
50°/-7°
40°/-18°
Abrasives
E24XL 1/2" dia. Mixing Nozzle
E200 Pneumatic Dispenser
OnSite
Supply
E102 Hand Dispenser
Red Head C6 18 fl. oz. Cartridge & Accessories
Part No.
Safety
C6-18
E24XL
E24
E102
E200
Rentals
78
Description
18 fl.oz. Cartridge, C6
Mixing Nozzle for C6-18. Nozzle dia.
1/2" (outside dia.) Overall length:10-3/8"
Mixing Nozzle for C6-18. Nozzle dia.
3/8" (outside dia.)
Hand Dispenser for C6-18
Pneumatic Dispenser for C6-18
Hartford, CT
800-969-0285
4
6
8
66.3
1/2 9/16 190.7
95.4
63.6
47.7
5/8 3/4
48.8
32.5
24.4
97.8
77.2
38.6
25.7
19.3
7/8
64.0
32.0
21.4
16.0
1 1-1/8 52.6
26.3
17.6
13.2
1
DRILL HOLE
DIA. (IN.)
ROD
3/4 7/8
C6 Epoxy Adhesive
18 ounce Cartridge
EMBEDMENT DEPTH (IN.)
6
8
1/4 7/16 293.7 146.8
97.9
73.4
3/8 5/8 170.0
85.0
56.7
42.5
1/2 3/4 122.4
61.2
40.8
30.6
5/8 7/8
62.6
31.3
20.9
15.7
3/4
49.5
24.8
16.5
12.4
7/8 1-1/8 41.0
20.5
13.7
10.3
C6 18 fl. oz. cartridge
2
88.3
EPCON C6 Epoxy Adhesive
Ordering Information
EMBEDMENT DEPTH (IN.)
3/8 7/16 265.0 132.5
REBAR
Threaded
Rod
• 1 hour cure time (see chart)
• Works in damp holes and underwater applications
• Minimum shrinkage — can be
used in oversized holes & diamond cored holes
• High heat deflection temperature: 140°F (ASTM D648)
• One formula for both solid and hollow base materials
• NSF standard 61 certified for drinking water systems
• Extensively tested — earthquake, underwater, creep,
freeze-thaw, radiation, fire, fatigue, electrical isolation, ozone and many more.
• Extensive use — Used on projects all over the world
for almost 20 years.
A7 Acrylic Adhesive
28 ounce Cartridge
1/4 5/16 457.7 228.9 152.8 114.4
1
2
4
A7 Acrylic Adhesive
28 ounce Cartridge
EMBEDMENT DEPTH (IN.)
2
4
6
8
#3 7/16 331.3 165.6 110.4
82.8
#4 5/8 186.5
93.2
62.2
46.6
#5 3/4 143.0
71.5
47.7
35.8
#6 7/8 115.5
57.7
38.5
28.8
#7
53.3
35.6
26.7
#8 1-1/8 88.6
44.3
29.5
22.2
#9 1-1/4 51.4
25.7
17.1
12.8
#10 1-1/2 42.0
21.0
14.0
10.5
REBAR
Strut
The acrylic resin and hardening
agent are completely mixed as
they are simultaneously dispensed
from the dual cartridge through a
static mixing nozzle, directly into the
anchor hole. C6 can be used with
threaded rod or rebar.
ROD
DRILL HOLE
DIA. (IN.)
Threaded Rod in Solid Concrete
Anchors
C6: Compare to
RE500 Adhesive
Always Works — Even
Under The Most Severe
Installation Conditions
BASE MATERIAL
TEMP. (F°/C°)
Number of Anchoring Installations per Cartridge*
DRILL HOLE
DIA. (IN.)
Hilti® Equivalents:
1
DRILL HOLE
DIA. (IN.)
EPCON C6
Epoxy Adhesive
Reinforceing Bar in Solid Concrete
Fasteners
"Pure" Epoxy / Adhesive Anchoring
106.7
C6 Epoxy Adhesive
18 ounce Cartridge
EMBEDMENT DEPTH (IN.)
2
4
6
8
#3 7/16 331.3 165.6 110.4
82.8
#4 5/8 186.5
93.2
62.2
46.6
#5 3/4 143.0
71.5
47.7
35.8
#6 7/8 115.5
57.7
38.5
28.8
#7
53.3
35.6
26.7
44.3
29.5
22.2
1
106.7
#8 1-1/8 88.6
*The number of anchoring installations is based upon calculations of hole volumes using
ANSI tolerance carbide tipped drill bits, the nominal areas of the reinforcing bars and
the stress areas of the threaded rods. These estimates do not account for waste.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1
1
1
1
1
Wire Brushes
• Brushes may be used on up
to 50 holes, depending on
concrete strength.
• Brushes required for installation of #4, #8 and larger
rebar are available.
SB038
SB012
SB058
SB034
SB078
SB010
SB125
ESDS-38
EHAN-38
3/8"
#3
1/2"
–
5/8"
#5
3/4"
#6
7/8"
–
1"
#7
1-1/4" –
12" Extension
12" Extension
Brush
Dia
7/16"
5/8"
9/16"
3/4"
3/4"
1"
7/8"
1-1/4"
1"
1-1/2"
1-1/8"
1-5/8"
1-3/8"
1-3/4"
w/ SDS+ Adapter
w/ T-Handle
Std
Box
4
4
4
4
4
4
4
1
1
EPCON G5 Epoxy Adhesive
Ordering Information
E202 Pneumatic Dispenser
Hole Plugs
E102 Hand Dispenser
• Easier overhead
installations, centers
rod in hole, keeps adhesive off of threads.
Hole
Dia
Std
Box
E038
E012
E058
E034
E078
E010
E114
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
7/16"
9/16"
3/4"
7/8"
1"
1-1/8"
1-3/8"
25
25
20
20
10
10
10
G5-22
E55
E102
E202
22 fl.oz. Cartridge, G5
Mixing Nozzle for G5-22. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
Hand Dispenser for G5-22
Pneumatic Dispenser for G5-22
Meets "Buy American" provision in
Stimulus Bill Section 1605
2
4
6
8
3/8 7/16 208.8 104.4
69.6
52.2
1/2 9/16 150.3
75.1
50.1
37.6
5/8 3/4
76.9
38.4
25.6
19.2
3/4 7/8
60.8
30.4
20.3
15.2
7/8
50.5
25.2
16.8
12.6
1 1-1/8 41.5
20.7
13.8
10.4
Washington D.C.
877-419-2755
DRILL HOLE
DIA. (IN.)
EMBEDMENT DEPTH (IN.)
90.2
Philadelphia, PA
610-647-8070
Description
Number of Anchoring Installations per Cartridge*
G5 Epoxy Adhesive
G5 Epoxy Adhesive
22 ounce Cartridge
22 ounce Cartridge
1/4 5/16 360.6 180.3 120.2
1
Part No.
REBAR
DRILL HOLE
DIA. (IN.)
ROD
Rod in Solid Concrete
BP-10
Rod
Dia.
Rebar in Solid Concrete
Hand Pump
Red Head G5 22 fl. oz. Cartridge & Accessories
Part
No.
Fasteners
E55 Mixing Nozzle
Tools
Anchor
Drill Bit
Dia. Rebar Dia.
FULL
CURE TIME
24 hours
24 hours
24 hours
24 hours
EMBEDMENT DEPTH (IN.)
4
6
8
#3 7/16 194.5
97.2
64.8
48.6
#4 5/8 146.9
73.5
49.0
36.7
#5 3/4 112.7
56.3
37.6
28.2
#6 7/8
91.0
45.5
30.3
22.7
#7
2
43.6
21.8
14.5
10.9
#8 1-1/8 38.8
19.4
12.9
9.7
#9 1-1/4 40.5
20.2
13.5
10.1
#10 1-1/2 33.1
16.6
11.0
8.3
Boston , MA
800-645-6155
1
OnSite
Supply
Part
No.
BASE MATERIAL
WORKING
(F°/C°)
TIME
110°/ 43°
9 minutes
90°/ 32° 9 minutes
70°/ 20° 15 minutes
50°/ 10° 15 minutes
Anchors
1/2"
3/4"
1"
1-1/4"
1-1/2"
Abrasives
B012
B034
B100
B114
B112
• 24 hour cure time at 70° F
• Fire Rated: tested up to 4 hours
Fire Resistance Period
• High Strength Epoxy
• Solid base materials
• Works in dry, damp, saturated, and
underwater applications
• Gives more time to install anchors
• Easier to install anchors in hot
weather
• Odorless
• Oversized and cored holes
• Improved wet/water filled
• Resists wind loads
Hartford, CT
800-969-0285
*The number of anchoring
installations is based
upon calculations of hole
volumes using ANSI tolerance carbide tipped drill
bits, the nominal areas
of the reinforcing bars
and the stress areas of
the threaded rods. These
estimates do not account
for waste.
79
Safety
• Proper hole cleaning using
a brush is essential for
optimum performance.
Std
Box
Rentals
Nylon Brushes
Size
Dia.
Pipe
Hangers
Part
No.
Strut
G5 Epoxy Adhesive
Hole Cleaning Tools & Accessories
Threaded
Rod
"Pure" Epoxy / Adhesive Anchoring
Fasteners
"Pure" Epoxy / Adhesive Anchoring
COMPARE TO: Red Head C6 & Hilti RE500SD:
COMPARE TO: Red Head A7 & Hilti HY150 MAX
Anchors
AC100+ Gold
Epoxy Acrylate
PE1000+ Epoxy
Epoxy Injection Adhesive
Anchoring System
Strut
The PE1000+ is a two-component, high
strength adhesive anchoring system.
The system includes injection adhesive
cartridges, mixing nozzles, dispensing
tools and hole cleaning equipment.
The PE1000+ is designed for bonding threaded rod and reinforcing bar
hardware into drilled holes in concrete
base materials.
Threaded
Rod
Part No.
0500SD
Description
Box
PE1000+ 13 fl. oz. dual cartridge
12
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Pipe
Hangers
Accessories
Part No.
08294
08281
08295
Description
Box
Extra Mixing Nozzle with (8" extension) 2
Mixing Nozzle extension, 8"
2
PE1000+ Heavy Duty dispensing tool 1
Hand Pump/Blower
Tools
Wire Brushes
The AC100+ Gold is a two-component adhesive anchoring system.
The system includes injection adhesive in plastic cartridges, mixing
nozzles, dispensing tools and hole
cleaning equipment. The AC100+
Gold is designed for bonding
threaded rod and reinforcing
bar hardware into drilled holes in
concrete base materials.
Part No.
8462SD
8478SD
8480SD
8486SD
8490SD
Description
AC100+
AC100+
AC100+
AC100+
AC100+
Gold
Gold
Gold
Gold
Gold
Box
5 fl. oz. Push Pack
10 fl. oz. Quik-Shot
8 fl. oz. dual cartridge
12 fl. oz. dual cartridge
29 fl. oz. dual cartridge
12
12
—
—
—
One AC100+ Gold mixing nozzle is packaged with each cartridge.
AC100+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Accessories
Cartridge System Mixing Nozzles
Part No.
08293
08294
08281
Description
Box
Extra Mixing Nozzle for AC100+ Gold
(5 oz., 8 oz., 10 oz. and 12 oz.
2
Extra Mixing Nozzle with (8" extension)
for AC100+ Gold 29 oz.
2
Mixing Nozzle extension, 8"
2
Accessories
Dispensing Tools for Injection Adhesion
Part No.
Abrasives
Adapters & Extensions
Powers Hole Cleaning Tools & Accessories
Part No.
Wire Brushes
OnSite
Supply
Safety
08284
08285
08286
08287
08288
08289
08290
08291
08283
08296
08282
08280
08292
Rentals
80
Description
for 7/16" ANSI Hole (3/8" rod or #3 Rebar)
for 9/16" ANSI Hole (1/2" rod or #4 Rebar)
for 11/16" ANSI Hole (5/8" rod or #5 Rebar)
for 7/8" ANSI Hole (3/4" rod or #6 Rebar)
for 1" ANSI Hole (7/8" rod or #7 Rebar)
for 1-1/8" ANSI Hole (1" rod or #8 Rebar)
for 1-3/8" ANSI Hole (1-1/4" rod or #9 Rebar)
for 1-1/2" ANSI Hole (#10 Rebar)
SDS-Plus adapter for steel brushes
Standard drill adapter for steel brushes
Steel brush extension, 12"
Hand pump/dust blower
Air compressor nozzle with extension
Hartford, CT
800-969-0285
08437
08479
08484
08485
08485SD
08494
08495
Description
Box
Manual caulking gun for Push-Pak
and Quik-Shot
High Performance caulking gun for
Push-Pak and Quik-Shot
AC100+ Gold manual tool
AC100+ Gold 8 oz., 10 oz., & 12 oz.
high performance manual tool
AC100+ Gold 8 oz., 10 oz., & 12 oz.
standard all-metal manual tool
AC100+ Gold 29 oz. manual tool
AC100+ Gold 29 oz.
high performance manual tool
1
1
1
1
1
1
1
Pneumatic Injection Tool Delivery System
Part No.
08493
Description
Box
Pneumatic Tool for 29 oz. AC100+
1
Battery Injection Dispensing Tool
Part No.
08444
Boston , MA
800-645-6155
Description
Box
Battery Tool for 29 oz. AC100+
Washington D.C.
877-419-2755
1
Philadelphia, PA
610-647-8070
Measurements
(Measured End to End) • (By request)
Chisel Point
Stud Ordering
• For use with cast in place
anchor stud assemblies
SDS Shank Carbide Tipped Bits
Strut
Powerfoam™/TriggerFoam™
Expanding Polyurethane Foam
Part No.
Part No.
Bit Size
48-20-7400
48-20-7401
48-20-7410
48-20-7411
48-20-7412
48-20-7413
48-20-7414
48-20-7415
48-20-7416
48-20-7421
48-20-7422
48-20-7424
48-20-7425
48-20-7426
48-20-7430
48-20-7431
48-20-7432
48-20-7434
48-20-7435
48-20-7436
48-20-7438
48-20-7441
48-20-7444
5/32 x 2 x 4
5/32 x 4 x 6
3/16 x 2 x 4
3/16 x 4 x 6
3/16 x 6 x 8
3/16 x 8 x 10
3/16 x 10 x 12
3/16 x 12 x 14
3/16 x 14 x 16
7/32 x 4 x 6
7/32 x 6 x 8
7/32 x 9 x 11
7/32 x 12 x 14
7/32 x 14 x 16
1/4 x 2 x 4
1/4 x 4 x 6
1/4 x 6 x 8
1/4 x 9 x 11
1/4 x 12 x14
1/4 x 14 x 16
1/4 x 18 x 20
5/16 x 4 x 6
5/16 x 10 x 12
48-20-7451
48-20-7452
48-20-7453
48-20-7454
48-20-7457
48-20-7459
48-20-7461
48-20-7464
48-20-7467
48-20-7471
48-20-7473
48-20-7474
48-20-7477
48-20-7479
48-20-7481
48-20-7484
48-20-7487
48-20-7601
48-20-7602
48-20-7604
48-20-7607
48-20-7609
3/8 x 4 x 6
3/8 x 6 x 8
3/8 x 8 x 10
3/8 x 10 x 12
3/8 x 16 x 18
3/8 x 22 x 24
7/16 x 4 x 6
7/16 x 10 x 12
7/16 x 16 x 18
1/2 x 4 x 6
1/2 x 8 x 10
1/2 x 10 x 12
1/2 x 16 x 18
1/2 x 22 x 24
9/16 x 4 x 6
9/16 x 10 x 12
9/16 x 16 x 18
5/8 x 4 x 6
5/8 x 6 x 8
5/8 x 10 x 12
5/8 x 16 x 18
5/8 x 22 x 24
8130
8132
8130
Description
Powerfoam , 12 ounce
Powerfoam™, 29 ounce
TriggerFoam™, 29 ounce
™
Abrasives
Bit Size
8142 TriggerFoam™ Cleaner
20 ounce
8139 Plastic
TriggerFoam™
Gun
8140 Metal
TriggerFoam™ Gun
OnSite
Supply
Part No.
Washington D.C.
877-419-2755
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
1/4
1/4
1/4
1/4
1/4
One-part polyurethane expanding foams. Their exceptional
ability to bond allows Powerfoam and TriggerFoam to be
applied to various building elements including the surfaces
of concrete, brick, block, wood, steel, aluminum and other
metals. Neutral odor.
• Up to 25% Faster Drilling
• Easier Centering
• For Concrete, Masonry, Brick and Block
Philadelphia, PA
610-647-8070
2
3
4
3
4
3
4
3
3
4
3
4
4
Threaded
Rod
Square Plate
Washers
3/8
3/8
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
Thick
TriggerFoam™ Accessories
Part No.
8139
8138
8140
8142
8137
Boston , MA
800-645-6155
Description
TriggerFoam™
TriggerFoam™
TriggerFoam™
TriggerFoam™
TriggerFoam™
Plastic Gun
Heavy Duty Gun
Metal Gun
Cleaner 20 ounce
Subfloor Gun, 22"
Hartford, CT
800-969-0285
Safety
Specify:
•• Rod Size
••Overall Length
••Hole Inside Diameter
••Plate Thickness
••Square Size
37DFIP/1/4 x 2 x 2
37DFIP/1/4 x 3 x 3
37DFIP/1/4 x 4 x 4
50DFIP/1/4 x 3 x 3
50DFIP/1/4 x 4 x 4
62DFIP/1/4 x 3 x 3
62DFIP/1/4 x 4 x 4
62DFIP/3/8 x 3 x 3
75DFIP/1/4 x 3 x 3
75DFIP/1/4 x 4 x 4
87DFIP/1/4 x 3 x 3
87DFIP/1/4 x 4 x 4
1DFIP/1/4 x 4 x 4
Square
Pipe
Hangers
Plate Washer
Ordering
Nominal ID
Tools
` Part No.
Anchors
Specify:
• Rod Size = D
• Overall Length = L
81
Rentals
Fully Threaded
Fasteners
Threaded Rod & Square Plate Washers (For Epoxy Anchors)
Fasteners
Powers® Wedge Anchors
Hilti® Equivalents:
Anchors
Anchor Materials:
Power-Stud™: Compare to Kwik
Bolt 3 Anchors
Mechanically Galvanized Carbon Steel, Type 304 Stainless
Steel, Type 316 Stainless Steel
Size Range:
¼" dia. x 1¾" L. to 1" dia. x 12" L.
Suitable Base Materials:
Normal weight and structural lightweight concrete,
Grouted concrete masonry
Power-Stud Wedge Anchors
™
The Power-Stud anchor, formerly known as the Rawl-Stud, is
a fully threaded, torque-controlled, wedge expansion anchor.
Head Styles:
Threaded Hex Nut, Rod Hanger, Tie Wire
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Anchor Size
(Drill Dia.)
Thread
Length
Minimum
Embedment
Std.
Box
Mechanically
Galvanized
Stainless
Steel 304
Stainless
Steel 316
1/4" x 1-3/4"
1/4" x 2-1/4"
1/4" x 3-1/4"
3/8" x 2-1/4"
3/8" x 2-3/4"
3/8" x 3"
3/8" x 3-1/2"
3/8" x 3-3/4"
3/8" x 5"
1/2" x 2-3/4"
1/2" x 3-3/4"
1/2" x 4-1/2"
1/2" x 5-1/2"
1/2" x 7"
5/8" x 3-1/2"
5/8" x 4-1/2"
5/8" x 5"
5/8" x 6"
5/8" x 7"
5/8" x 8-1/2"
3/4" x 4-1/4"
3/4" x 4-3/4"
3/4" x 5-1/2"
3/4" x 6-1/4"
3/4" x 7"
3/4" x 8-1/2"
3/4" x 10"
7/8" x 6"
7/8" x 8"
1" x 6"
1" x 9"
1" x 12"
3/4"
1-1/4"
2-1/4"
1-1/4"
1-5/8"
1-7/8"
2-3/8"
2-5/8"
3-7/8"
1-3/8"
2-3/8"
3-1/8"
4-1/8"
5-5/8"
2"
3"
3-1/2"
4-1/2"
5-1/2"
7"
2-3/8"
2-7/8"
3-5/8"
4-3/8"
5-1/8"
6-5/8"
8-1/8"
2-3/4"
4-3/4"
2-3/8"
5-3/8"
8-3/8'
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-7/8"
3-7/8"
4-1/2"
4-1/2"
4-1/2"
100
100
100
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
20
20
20
20
20
10
10
10
10
10
10
5
—
—
—
—
—
—
—
—
—
7720
—
7723
7724
7726
7730
—
—
7734
—
—
7741
7742
—
—
7748
—
7750
7752
—
7763
—
7300
7302
7304
7310
7312
7313
7314
7315
7316
7320
7322
7323
7324
7326
7330
7332
7333
7334
7336
7338
7340
7341
7342
7344
7346
7348
7349
—
7352
7361
7363
7365
7600
7602
7604
7610
7612
7613
7614
7615
7616
7620
7622
7623
7624
7626
7630
7632
7633
7634
7636
7638
7640
7641
7642
7644
7646
7648
—
—
—
—
—
—
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting length.
Rod Hanger, Power-Stud®
Tie-Wire Power-Stud™
Safety
for 3/8" Rod Hanging Applications
Part Anchor Size Thread
Number (Drill Dia.) Depth
7806
Rentals
82
1/2" x 2-3/8" 9/16"
Minimum
Embed
Std.
Box
Part
No.
2-1/4"
50
7409
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Anchor Size Tie-Wire Minimum
(Drill Dia.)
Hole
Embed
1/4" x 2"
9/32"
Washington D.C.
877-419-2755
2-1/4"
Std.
Box
50
Philadelphia, PA
610-647-8070
Hilti® Equivalents:
Anchors
Trubolt®: Compare to Kwik Bolt 3
Anchors
Anchor Materials:
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
WS-1416
WS-1422
—
WS-1432
WS-3822
WS-3826
WS-3830
WS-3836
WS-3850
WS-3870
WS-1226
WS-1236
WS-1242
WS-1244
—
WS-1254
—
WS-1270
WS-5834
WS-5842
WS-5850
WS-5860
—
WS-5870
—
WS-5884
WS-58100
WS-3442
—
WS-3446
—
WS-3454
WS-3454
—
WS-3470
—
WS-3484
—
WS-34100
WS-34120
WS-7860
WS-7880
WS-78100
WS-10060
WS-10090
—
—
—
—
—
—
—
—
—
—
WS-1226G
—
WS-1242G
—
—
WS-1254G
—
WS-1270G
WS-5834G
—
—
WS-5860G
—
—
—
—
—
—
—
WS-3446G
—
WS-3454G
—
—
—
—
WS-3484G
—
—
—
—
—
—
—
—
WW-1416
WW-1422
—
WW-1432
WW-3822
WW-3826
WW-3830
WW-3836
WW-3850
—
WW-1226
WW-1236
WW-1242
—
WW-1254
—
WW-1270
—
WW-5834
WW-5842
WW-5850
WW-5860
WW-5870
—
WW-5884
—
—
WW-3442
—
WW-3446
—
WW-3454
—
WW-3470
—
WW-3484
—
WW34100
—
—
—
—
—
WW-10060
WW-10090
—
SWW-1422
SWW-1432
—
SWW-3822
SWW-3826
SWW-3830
SWW-3836
SWW-3850
—
SWW-1226
SWW-1236
SWW-1242
—
SWW-1254
—
—
—
—
SWW-5842
SWW-5850
—
SWW-5870
—
—
—
—
—
SWW-3446
—
SWW3454
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
83
Strut
Threaded
Rod
100
100
100
100
50
50
50
50
50
50
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
316
Stainless
Pipe
Hangers
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/4"
2-1/4"
21/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-1/4"
3-3/4"
3-3/4"
3-3/4"
4-1/2"
4-1/2"
304
Stainless
Tools
3/8"
7/8"
1-1/8"
1-7/8"
3/8"
7/8"
1/8"
1-7/8"
3-1/8"
5-1/8"
1/8"
1"
1-1/2"
1-3/4"
2-3/4"
2-3/4"
4-1/4"
4-1/4"
1/8"
7/8"
1-5/8"
2-5/8"
3-5/8"
3-5/8"
5-5/8"
5-5/8"
6-5/8"
1/4"
3/4"
3/4"
1-1/2"
1-1/2"
2-1/4"
3"
3"
4-1/2"
4-1/2"
6"
6"
8"
1-3/8"
3-3/8"
5-3/8"
1/2"
3-1/2"
Galvanized
Steel
Abrasives
3/4"
1-1/4"
2-1/4"
2-1/4"
1-1/8"
1-5/8"
1-3/4"
2-1/2"
3-3/4"
3-7/8"
1-1/4"
2-1/4"
2-3/4"
3"
3"
4"
3-1/2"
5-1/2"
1-3/4"
2-1/2"
3-1/4"
4-1/4"
3-1/2"
5-1/4"
3-1/2"
5-3/4"
5-3/4"
2-3/8"
21/4"
2-7/8"
3"
3-5/8"
4-3/8"
3-1/2"
5-1/8"
3-1/2"
5-3/4"
1-3/4"
5-3/4"
1-3/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
Zinc Plated
Steel
OnSite
Supply
1/4-20 x 1-3/4"
1/4-20 x 2-1/4"
1/4-20 x 3-1/4"
1/4-20 x 3-1/4"
3/8"-16 x 2-1/4"
3/8"-16 x 2-3/4"
3/8"-16 x 3"
3/8"-16 x 3-3/4"
3/8"-16 x 5"
3/8"-16 x 7"
1/2"-13 x 2-3/4"
1/2"-13 x 3-3/4"
1/2"-13 x 41/4"
1/2"-13 x 4-1/2"
1/2"-13 x 5-1/2"
1/2"-13 x 5-1/2"
1/2"-13 x 7"
1/2"-13 x 7"
5/8"-11 x 3-1/2"
5/8"-11 x 41/4"
5/8"-11 x 5"
5/8"-11 x 6"
5/8"-11 x 7"
5/8"-11 x 7"
5/8"-11 x 8-1/2"
5/8"-11 x 8-1/2"
5/8"-11 x 10"
3/4"-10 x 41/4"
3/4"-10 x 4-3/4"
3/4"-10 x 4-3/4"
3/4"-10 x 5-1/2"
3/4"-10 x 5-1/2"
3/4"-10 x 6-1/4"
3/4"-10 x 7"
3/4"-10 x 7"
3/4"-10 x 8-1/2"
3/4"-10 x 8-1/2"
3/4"-10 x 10"
3/4"-10 x 10"
3/4"-10 x 12"
7/8"-9 x 6"
7/8"-9 x 8"
7/8"-9 x 6"
1"-8 x 6"
1"-8 x 9"
Trubolt wedge anchors feature a type 18-8 stainless steel split
expansion ring, a threaded stud bolt body and integral cone
expander, nut and washer. Anchor bodies are made from plated
carbon steel, hot-dipped galvanized carbon steel, Type 304 or
Type 316 stainless steel.
Safety
Trubolt® Wedge Anchors
Rentals
Zinc Plated Carbon Steel, Hot Dipped Galvanized Carbon
Steel, Type 304 Stainless Steel, Type 316 Stainless Steel
Head Styles:
Hex Nut, Tie-wire
Size Range:
¼" dia. x 1¾" L. to 1" dia. x 12" L.
Suitable Base Materials:
Concrete, Block and Stone
Anchor
Thread Max. Fixture Min.
Std.
Size
Length
Thickness Embed. Box
Fasteners
Red head® wedge anchors
Fasteners
Powers® sleeve Anchors
Hex Nut
Hex Nut
Anchors
Threshold Flat Head
Acorn Nut
Rod Hanger Lok-Bolt
Strut
Round Head
Combo Flat Head
Lok-Bolt AS™ Sleeve Anchors
Threaded
Rod
The Lok-Bolt AS™ anchor is a pre-assembled, single-unit,
all-steel sleeve anchor available in carbon steel and stainless
steel which can be used in concrete, block, brick and stone.
Pipe
Hangers
Anchor Materials:
Carbon Steel, Type 304 Stainless Steel
Head Styles:
Finished Hex Head, Acorn Nut, Round Head, Combo Flat
Head, Threshold Flat Head, Rod Hanger, Tie-wire
Size Range:
¼" dia. x 5 / 8" L. to ¾" dia. x 8¼" L.
Suitable Base Materials:
Concrete, Block, and Brick
Tools
Abrasives
1"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/2"
1-1/2"
1-1/2"
1-5/8"
1-5/8"
5305S
5310S
5315S
5320S
5325S
5330S
5340S
5345S
5350S
5360S
100
100
100
100
100
100
50
50
50
50
—
6170S
6172S
—
—
—
—
6174S
6175S
6176S
The published length is the minimum overall length of the anchor.
OnSite
Supply
Part
Number
5810S
5815S
5825S
5/16" x 1-1/2"
5/16" x 2-1/2"
3/8" x 1-7/8"
3/8" x 3"
3/8" x 4"
1/2" x 2-1/4"
1/2" x 3"
1/2" x 4"
1/2" x 5-1/4"
1/2" x 6"
5/8" x 2-1/4"
5/8" x 3"
5/8" x 4-1/4"
5/8" x 6"
3/4" x 2-1/2"
3/4" x 4-1/4"
3/4" x 6-1/4"
3/4" x 8-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-7/8"
1-7/8"
2-1/4"
2-1/4"
2-1/4"
2"
2"
2-3/4"
2-3/4"
2-1/4"
3-3/8"
3-3/8"
3-3/8"
100
100
50
50
50
50
25
25
25
10
25
25
10
10
10
10
10
10
Anchor
Size
1/4" x 5/8" 1-1/32" 1/2" 100 5125S
1/4" x 1-3/8" 1-21/32" 1-1/8" 100 5150S
1/4" x 2-1/4" 2-9/16" 1-1/8" 100 5175S
Round Head, Slotted
Anchor
Size
Drill Min. Std. Carbon Stainless
Dia. Embed. Box Steel Steel 304
1/4" x 1-1/8"
1/4" x 2"
1/4" x 2-3/4"
1/4" x 3-3/4"
5/16" x 2-3/8"
5/16" x 3-3/8"
3/8" x 2-1/2"
3/8" x 3-1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
Anchor
Size
Minimum
Embed
Std.
Box
1"
1-1/8"
1-1/8"
1-1/8"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
100
100
100
100
100
100
50
50
5205S
—
5210S 6180S
5215S
—
5220S
5225S
—
5230S
—
5235S
—
5240S
—
1/4" x 1-1/2"
3/8" x 1-7/8"
1/2" x 2-1/4"
1-1/2"
1-5/8"
2-1/4"
50
50
25
Threshold Flat Head
Anchor
Size
Drill
Min.
Std. Carbon Stainless
Dia. Embed. Box
Steel Steel 304
1/4" x 2"
1/4"
Safety
Tie Wire, Lok-Bolt
Anchor
Size
Drill
Min.
Std. Carbon Stainless
Dia. Embed. Box
Steel Steel 304
3/8"
—
50
5684S
Rentals
Extenders are used for added length on all head styles.
—
6150S
—
The published min. length is measured from below the washer to the end of the anchor.
Anchor
Size
84
—
—
6152S
6153S
—
6156S
5157S
6160S
—
—
—
—
6164S
—
—
6168S
—
—
Bolt
Min. Std. Carbon Stainless
Length Embed. Box Steel Steel 304
Lok-Bolt Extenders
3/8" x 1"
5005S
5010S
5015S
5020S
5022S
5025S
5030S
5034S
5033S
5032S
5035S
5038S
5040S
5045S
5050S
5055S
5060S
5065S
The published min. length is measured from below the head to the end of the anchor.
Rod Hanger
Std. Carbon Stainless
Box
Steel Steel 304
Acorn Nut
Drill Min. Std. Carbon Stainless
Dia. Embed. Box Steel Steel 304
1/4" x 1-1/8" 1/4"
1/4" x 2"
1/4"
1/4" x 3"
1/4"
1/4"
1/4" x 4"
1/4" x 5-1/4" 1/4"
5/16" x 2-1/2" 5/16"
3/8" x 2-3/4" 3/8"
3/8" x 4"
3/8"
3/8"
3/8" x 5"
3/8" x 6"
3/8"
Min.
mbed.
E
The published min. length is measured from below the washer to the end of the anchor.
Combo Flat Head
Anchor
Size
Anchor
Size
Hartford, CT
800-969-0285
—
5/16" x 1-1/2"
Boston , MA
800-645-6155
1-1/8"
100
5500S
—
Min.
Std. Carbon Stainless
Embed. Box
Steel Steel 304
1-1/2"
50
Washington D.C.
877-419-2755
5700S
—
Philadelphia, PA
610-647-8070
Anchor Materials:
Acorn Nut
AN
Anchors
Hex Nut
HN
Head Styles:
Threshold Flat
Head TH
Round Head
RS
Tie Wire
TW
Dynabolt® Sleeve Anchors
¼" dia. x 5 / 8" L. to
¾" dia. x 6½" L.
Hilti® Equivalents:
Suitable Base Materials:
100
100
100
100
100
100
100
50
50
50
50
50
50
25
25
25
25
25
10
10
10
10
10
HN-1413
—
HN-1422
—
—
HN-1614
HN-1624
HN-3817
—
HN-3830
—
—
—
HN-1222
HN-1230
HN-1240
HN-5822
HN-5830
HN-5842
HN-5860
HN-3424
HN-3440
HN-3462
—
FS-1411
FS-1420
FS-1430
FS-1440
—
—
—
FS-3826
—
FS-3840
FS-3850
FS-3860
—
—
—
—
—
—
—
—
—
—
SHN-1413
—
—
—
—
—
—
SHN-3817
—
SHN-3830
—
—
—
SHN-1222
SHN 1230
SHN-1240
—
—
SHN-5842
—
—
—
—
—
—
SFS-1420
SFS-1430
—
—
—
—
SFS-3826
—
SFS-3840
—
—
—
—
—
SFS-3826
—
—
—
—
—
—
Pipe
Hangers
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-1/2"
1-3/8"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-7/8"
1-7/8"
1-7/8"
2"
2"
2"
2"
2-1/4"
2-1/4"
2-1/4"
S. Steel 304
Phillips Flat Head
Tools
1/4"
1/4"
1-1/8"
2"
2-7/8"
1/4"
1-1/4"
3/8"
1-1/2"
1-1/2"
2-1/2"
3-1/2"
4-1/2"
3/8"
1-1/8"
2-1/8"
1/4"
1"
2-1"
4"
1/4"
1-3/4"
4"
S. Steel 304
Hex Nut
Abrasives
1/4" x 1-3/8"
1/4" x 1-1/2"
1/4" x 2-1/4"
1/4" x 3-1/8"
1/4" x 4"
5/16" x 1-1/2"
5/16" x 2-1/2"
3/8" x 1-7/8"
3/8" x 2-7/8"
3/8" x 3"
3/8" x 4"
3/8" x 5"
3/8" x 6"
1/2" x 2-1/4"
1/2" x 3"
1/2" x 4"
5/8" x 2-1/4"
5/8" x 3"
5/8" x 4-1/4"
5/8" x 6"
3/4" x 2-1/2"
3/4" x 4"
3/4" x 6-1/4"
Std. Carbon Steel Carbon Steel
Hex Nut Phillips Flat Head
Box
Acorn Nut, Dynabolt®, Carbon Steel
Anchor Max. Fixture
Min.
Std.
Size
Thickness
Embed. Box
1/8"
1/4" x 5/8"
1/4" x 1-3/8" 1/4"
1/4" x 2-1/4" 1-1/8"
1/2"
1-1/8"
1-1/8"
100
100
100
Part
Number
AN-1405
AN-1413
AN-1422
Round Head, Dynabolt®, Carbon Steel
Anchor Max. Fixture
Min.
Std.
Size
Thickness
Embed. Box
Part
Number
/4" x 2-7/8" 1-3/4"
1
3/8" x 2-5/8" 1-1/8"
RS-1426
RS-3824
1-1/8"
1-1/2"
100
100
Threshold Flat Head, Dynabolt®, Carbon Steel
Round Head, Dynabolt®, Type 304 Stainless Steel
Anchor Max. Fixture
Min.
Std.
Size
Thickness
Embed. Box
Part
Number
Anchor Max. Fixture
Min.
Std.
Size
Thickness
Embed. Box
1/4" x 2-1/4" 1-1/8"
TH-1422
1/4" x 2"
Philadelphia, PA
610-647-8070
1-1/8"
100
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
7/8"
1-1/8"
Hartford, CT
800-969-0285
100
Part
Number
OnSite
Supply
Anchor Max. Fixture
Min.
Size
Thickness
Embed.
Threaded
Rod
Dynabolt®: Compare to HLC Anchors
Concrete, Block, Brick and Stone
Strut
Dynabolt is a versatile, medium-duty expansion anchor
featuring a split expansion sleeve over a threaded stud
bolt body and integral expander, nut and washer.
Size Range:
Safety
Hex Nut, Acorn
Nut, Round Head,
Phillips Flat Head,
Threshold Flat
Head, Tie-wire
SRS-1420
85
Rentals
Zinc Plated Carbon
Steel, Type 304
Stainless Steel
Head Styles
Phillips Flat Head
FS
Fasteners
Red head® Sleeve anchors
Fasteners
power-bolt™ sleeve anchors
Power-Bolt™ Sleeve Anchors
Finished Hex Head
Flat Head
Vibration Resistant & Removable
Anchors
The Power-Bolt anchor, formerly known as the Rawl-Bolt, is
a heavy-duty, sleeve style, self-locking anchor. It is available
with a finished hex head or flat-head with a hex key insert
and can be used in concrete, block, brick and/or stone.
Carbon Steel, Hex Head, Power-Bolt™
Manufactured using a Grade 5 bolt. Plated with a commercial bright zinc finish and has a supplementary chromate
treatment in accordance with ASTM Specification B633.
Strut
Carbon Steel, Flat Head, Power-Bolt™
The flat head Power-Bolt™ anchor has a hex key insert
formed in the head of the bolt. Each box contains an Allen
wrench which matches the insert size.
304 Stainless Steel, Hex Head, Power-Bolt™
Threaded
Rod
Manufactured from 300 series stainless steel (passivated).
Suitable Base Materials:
Concrete, Block, Brick and Stone
Pipe
Hangers
Anchor
Size
1/4" x 1"
1/4" x 1-3/4"
1/4" x 3"
5/16" x 1-3/4"
5/16" x 2-1/2"
5/16" x 3-1/2"
3/8" x 2-1/4"
3/8" x 1-7/8"
3/8" x 3"
3/8" x 3¼"
3/8" x 4"
3/8" x 5"
3/8" x 6"
1/2" x 2-3/4"
1/2" x 3-3/4"
1/2" x 4-3/4"
1/2" x 5"
1/2" x 5-3/4"
5/8" x 3"
5/8" x 4"
5/8" x 5"
5/8" x 5-1/2"
5/8" x 6"
5/8" x 8-1/2"
3/4" x 3-1/4"
3/4" x 4-1/4"
3/4" x 5-1/4"
3/4" x 6-1/4"
3/4" x 8-1/4"
Tools
Abrasives
OnSite
Supply
Safety
Drill
Diameter
Minimum
Embedment
Std.
Box
Carbon Steel
Hex Head
S. Steel 304
Hex Head
Carbon Steel
Flat Head
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
7/8"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
2"
1-1/4"
2"
2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3"
3"
3"
3"
3"
100
100
100
100
50
50
50
50
50
50
50
50
50
50
25
25
25
25
20
15
15
15
15
10
15
10
10
10
10
6900
6902
6906
6907
6908
6909
6910
6911
6913
—
6916
—
—
6930
6932
6934
—
6936
6940
6942
6944
—
6945
6947
6950
6952
6954
6956
6957
5900
5902
5906
—
—
—
5910
—
—
—
5916
—
—
5930
—
5934
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6981
—
6982
6983
—
—
—
6984
—
—
—
—
6987
—
—
—
—
—
—
—
The published length is measured from below the washer to the end of the anchor. 1/4" and 5/16" Power-Bolt™ utilize a Grade 8 Bolt
Rentals
86
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Bang-it™ / Wood knocker™
Wood-Knocker Concrete Inserts
Anchor Materials:
Carbon Steel & Engineered Plastic
Size Range:
1/4" to 7/8" Threaded Rod
Anchor Materials:
Carbon Steel and Engineered
Plastic
Size Range:
1/4" to 3/4" Threaded Rod
1/4" Wood-Knocker™
3/8" Wood-Knocker™
1/2" Wood-Knocker™
5/8" Wood-Knocker™
3/4" Wood-Knocker™
1/2" Coil-Thread Wood-Knocker™
3/4" Coil Thread Wood-Knocker™
Std
Box
Brown
Green
Yellow
Red
Purple
Yellow
Purple
200
200
200
150
150
200
150
7540
7542
7544
7546
7548
7549
Color
Code
1/4" Bang-It™ Brown
3/8" Bang-It™ Green
1/2" Bang-It™ Yellow
5/8" Bang-It™
Red
3/4" Bang-It™ Purple
7/8" Bang-It™ Black
Pre-Drilled
Hole
Std
Box
13 ⁄ 16"
13 ⁄ 16"
13 ⁄ 16"
1-13 ⁄ 16"
1-13 ⁄ 16"
1-13 ⁄ 16"
100
100
50
50
50
50
Tools
7550
7552
7554
7556
7558
7567
7568
Color
Code
Description
Bang-It™ Installation Accessories
Bang-It™ Installation
Carbide Hole Saws
P/N
7560
7562
7564
7566
Description
Bang-It Deck Driller
13/16" Carbide Hole Saw for
1/4", 3/8" & 1/2" sizes
1-13/16" Carbide Hole Saw for
5/8", 3/4" & 7/8" sizes
Replacement Pilot Bit
™
OnSite
Supply
Description
Part
No.
Abrasives
Wood-Knocker™ Concrete Inserts Rod Hanging System
Pipe
Hangers
Bang-It™ Concrete Inserts Rod Hanging System
Suitable Base Materials:
Concrete
Part
No.
Threaded
Rod
Designed for installation in and through metal composite
deck (pan-deck) used to support newly poured concrete
floors or roof slabs. Allows overhead attachment of steel
threaded rod and threaded bolts in sizes ranging from 1/4"
to 7/8" in diameter. Protective sleeve prevents sprayed fireproofing and acoustical dampening products from clogging
the internal threads of the insert side. Color coded by size.
Wood-Knocker™ concrete
inserts are installed onto
wooden forms used to support newly poured concrete
floor slabs, roof slabs or walls.
Allows attachment of steel
threaded rod and threaded
bolts in sizes ranging from
1/4" to 3/4" in diameter. Color
coded by size.
Strut
Bang-It™ Concrete Inserts
™
D25023K
D25223K
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Check out our Complete Line of SDS,
SDS MAX and Spline Rotary Hammers
Beginning on page 317 of our Tool Section
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
87
Safety
• Variable speed trigger allows user to instantly control speed
from 0 to dialed setting
• SHOCKS – Active Vibration Control® reduces vibration up to 50%
• Includes depth gauge, side handle & carrying case
• Compare to Bosch Bulldog SDS Hammers
• Includes depth gauge, side handle and carrying case.
Rentals
# D25223K 1" D-Handle SDS Plus Hammer
w/SHOCKS Active Vibration Control
#D25023K
7/8" Compact SDS Drive D-Handle Rotary Hammer
Fasteners
POWERS® WEDGE-BOLT™
410 Stainless Steel Wedge-Bolt (Blue Tip) -
Anchors
For applications where additional corrosion resistance is
needed. Designed to be used with a matched tolerance
Wedge-Bit™ for optimum performance. The Wedge-Bolt works
in fixture clearance holes that are 1/16" over nominal, which is
typical of standard fixture holes used in steel fabrication. Blue
Tip Wedge-Bolts® must be installed using Wedge-Bits™
For ease in identification, Wedge-Bolts® have a blue tip,
Wedge-Bolts® OT have an orange tip
Wedge-Bolt™ Screw Anchors
A one-piece, heavy-duty screw anchor with a finished hex
head. Simple to install, easy to identify, fully removable,
and vibration resistant.
Strut
Suitable Base Materials:
Concrete, Block, Stone, Brick Masonry and Grouted CMU
Hilti® Equivalents:
Threaded
Rod
See page 72 for
Wedge-Bolt +
Code Listed Anchors
Size
(Inch)
Clearance
Min. Thread
Hole Dia. Embed. Length
1/4 x 1-3/4 5/16"
3/8
3/8
3/8
3/8
3/8
x
x
x
x
x
1-3/4
2-1/2
3
4
5
Wedge-Bolt™: Compare to 1/2 x 3
HUS-H Screw Anchors
1/2 x 4
1/2 x 5
Std
Box
Part
No.
1"
1-5/8"
100
7701N
5/16"
7/16"
7/16"
7/16"
7/16"
1"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/4"
2-3/4"
3-3/4"
3-3/4"
50
50
50
50
50
7702N
7705N
7706N
7707N
7708N
9/16"
9/16"
9/16"
1-3/4"
1-3/4"
1-3/4"
2-3/4"
3-3/4"
3-3/4"
50
50
50
7710N
7711N
7712N
Carbon Steel Wedge-Bolt Orange Tip - specifically engineered part for the racking industry. Use in
fixture clearance holes sized a minimum of 1/8" over nominal. The Wedge-Bolt OT must be installed with an
ANSI rotary drill bit.
Pipe
Hangers
Tools
Size
(Inch)
Abrasives
1/4
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
x
x
x
x
x
x
x
x
x
x
x
x
3
4
4
5
6
6-1/2
4
5
6
7
6
8
ANSI-Bit
Dia.
Clearance
Hole Dia.
Min.
Embed.
Thread
Length
Std
Box
3/8"
7/16"
9/16"
9/16"
9/16"
9/16"
11/16"
11/16"
11/16"
11/16"
13/16"
13/16"
1"
1-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
2-3/4"
3-3/4"
3-3/4"
3-3/4"
3-3/4"
3-3/4"
3¾"
2¾"
2¾"
2¾"
3-3/4"
3-3/4"
100
50
50
25
25
25
25
25
25
25
20
20
1/4"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
Wedge-Bits™
Wedge-Bolt® OT
Carbon Steel
7215
7216
7217
7218
7214
7233
7219
7221
7227
7229
7231
7232
Required for use with Wedge-Bolt™ Blue Tip Anchors.
OnSite
Supply
SDS-Plus Wedge-Bit™
SDS-Max Wedge-Bit™
Spline Wedge-Bit™
Part
No.
Part
No.
Part
No.
Safety
Rentals
Size
Usable/Overall
Lengths
1312
1314
1316
1318
1332
1320
1322
1334
1324
1326
1336
1328
1330
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
3/8"
3/8"
5/8"
3/4"
3/4"
88
2"/4"
4"/6"
4"/6"
6"/8"
10"/12"
4"/6"
8"/10"
10"/12"
6"/8"
10"/12"
16"/18"
6"/8"
10"/12"
1354
1356
1357
1358
Size
Usable/Overall
Lengths
1/2"
5/8"
5/8"
3/4"
8"/13"
8"/13"
16"/21"
8"/13"
1340
1342
1344
1348
Size
Usable/Overall
Lengths
1/2"
1/2"
5/8"
1/2"
8"/13"
11"/16"
8"/13"
8"/13"
For proper performance, the Wedge-Bolt+,
and 410 Stainless Steel Wedge-Bolt anchors
(indicated by a "Blue-Tip") must be installed with a
Wedge-Bit. The Wedge-Bit has a special matched
tolerance range designed to provide optimum
performance for the anchor.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
HD Straight Shank
Wedge-Bit™
Part
No.
1370
1372
1380
1384
1390
1390
1396
1397
Washington D.C.
877-419-2755
Size
Usable/Overall
Lengths
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
5/8"
3/4"
2-¾"/4"
4"/6"
4"/6"
11"/13"
4"/6"
11"/13"
11"/13"
11"/13"
Philadelphia, PA
610-647-8070
Red Head® LDT Anchors
Hilti® Equivalents:
Fasteners
RED Head® LDT Anchors
5/16"
5/16"
5/16"
5/16"
5/16"
7/16"
7/16"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
1/4"
1"
1-1/2"
2-1/2"
3-1/2"
1"
2"
3"
4"
1/4"
1-1/4"
2-1/4"
3-1/4"
1-1/4"
2-1/4"
3"
50
50
50
50
40
25
25
25
20
10
10
10
10
10
10
10
410
Stainless
Steel
LDT-3816
LDT-3824
LDT-3830
LDT-3840
LDT-3850
LDT-1230
LDT-1240
LDT-1250
LDT-1260
LDT-5830
LDT-5840
LDT-5850
LDT-5860
LDT-3444
LDT-3454
LDT-3462
SLD-3816
SLD-3824
SLD-3830
SLD-3840
SLD-3850
SLD-1230
SLD-1240
SLD-1250
—
—
—
—
—
—
—
—
The stainless steel LDT’s will be gold in color in order to
differentiate them from the carbon steel anchors which are silver.
LDT® Screw Anchor
Uses ANSI Drill Bits - No Special Drill Bits to Purchase!
• Cuts its own threads into concrete.
• Made of hardened carbon steel and zinc plated.
• Finished hex washer head with anti-rotation serrations prevents anchor back-out.
• Anchor head is stamped with a length identification code.
Anchor Materials:
Zinc Plated Carbon Steel, 410 Stainless Steel
Size Range:
3
/ 8" & ¾" diameters. 1¾" to 6" lengths
Suitable Base Materials:
Concrete, Masonry, Block
Strut
3/8 x 1-3/4
3/8 x 1-1/2
3/8 x 3
3/8 x 4
3/8 x 5
1/2 x 3
1/2 x 4
1/2 x 5
1/2 x 6
5/8 x 3
5/8 x 4
5/8 x 5
5/8 x 6
3/4 x 4-1/2
3/4 x 5-1/2
3/4 x 6-1/4
Carbon
Steel
Threaded
Rod
Drill Max.
Bit Thickness Std
Dia. of Fixture Box
Pipe
Hangers
Size
(Inch)
Anchors
LDT Anchors: Compare to HUS-H Screw Anchors
Tools
Compare:
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
89
Rentals
Safety
OnSite
Supply
Abrasives
Patented Sawtooth™
threads for easier
installation in 5/8"
and 3/4" sizes
Fasteners
POWERS® Dropin™ / Hollowset™ anchors
Steel Dropin™ Internally Threaded
Expansion Anchors
Hollowset Dropins™
Anchors
An all-steel, machine bolt anchor available in carbon steel
and two types of stainless steel. May be used in solid concrete, hard stone and solid block base materials. FM and
UL Listings make this the appropriate anchor for overhead
applications.
Strut
Anchor Materials:
Hilti® Equivalents:
Zinc Plated Carbon Steel, Type
Dropin®: Compare to
303 Stainless Steel, Type 316
HDI Anchors
Stainless Steel
Size Range:
1/4" to 3/4" Diameter UNC Coarse Thread
Suitable Base Materials:
Concrete
Threaded
Rod
Carbon Steel Smooth
Wall Dropin (No Lip)
Hollow-Set™
Internally Threaded Expansion Anchors
Designed for anchoring hollow base materials such as
hollow concrete block, brick with weep holes and hollow
core pre-cast concrete plank. It may also be used in solid
materials. May be installed flush or below base material
surface. Qualified for seismic and wind loads.
Suitable Base Materials:
Pipe
Hangers
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6304
6306
6308
6320
6312
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
1-9/16"
2"
2-1/2"
3-3/16"
7/16"
5/8"
13/16"
1-3/16"
1-3/8"
100
50
50
25
10
Concrete, Pre-Cast Hollow Core Plank, Hollow Concrete
and Brick Masonry
Hollow-Set Dropin with
Carbon Steel Cone
Type 303 Stainless Steel Dropin (No Lip)
Tools
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Sleeve
Depth
Std.
Box
6204
6206
6208
6210
6212
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
1-9/16"
2"
2-1/2"
3-3/16"
7/16"
5/8"
13/16"
1-3/16"
1-3/8"
100
50
50
25
10
9320
9330
9340
9350
9360
1/4"
5/16"
3/8"
1/2"
5/8"
3/8"
5/8"
58"
3/4"
1"
7/8"
1-5/16"
1-5/16"
1-3/4"
2"
5/8"
5/16"
15/16"
1-1/4"
1-1/2"
100
50
50
50
25
Type 316 Stainless Steel Dropin (No Lip)
Hollow-Set Dropin with Stainless Steel Cone
Abrasives
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
6224
6226
6228
6230
6232
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
1-9/16"
2"
2-1/2"
3-3/16"
7/16"
5/8"
13/16"
1-3/16"
1-3/8"
100
50
50
25
10
9420
9440
1/4"
3/8"
3/8"
5/8"
OnSite
Supply
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6324
6326
6328
1/4"
3/8"
1/2"
3/8"
1/2"
5/8"
1"
1-9/16"
2"
7/16"
5/8"
13/16"
100
50
5
Safety
Setting Tools
Part No.:
Anchor Size:
Rentals
90
6305
6307
6309
6311
6313
1/4"
3/8"
1/2"
5/8"
3/4"
Hartford, CT
800-969-0285
Thread
Depth
Std.
Box
7/8"
5/8"
1-5/16" 15/16"
100
100
Setting Tool (Solid Base Materials)
Carbon Steel Flanged
Dropin (Lipped)
Part
No.
Overall
Length
Part No.:
9322
9342
9352
9362
Anchor Size:
1/4"
5/16" & 3/8"
1/2"
5/8"
for Hollow Base Materials
Part No.
Size
9323
9333
9343
9353
9363
1/4"
5/16"
3/8"
1/2"
5/8"
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
100
50
50
25
10
100% Domestically produced zinc plated steel drop-in anchors.
Carbon Steel Smooth
Wall Dropin+ (No Lip)
Designed for performance in cracked and
uncracked concrete. Suitable base materials
include normal-weight concrete, structural sandlightweight concrete and concrete over metal
deck. Installed with a power tool and a Snake+
setting tool. After installation a steel insert element is threaded into the anchor body.
Threaded
Rod
An all-steel, machine bolt anchor. Features a Tapered Plug Pin requiring fewer hammer
blows to install. Suitable for uncracked concrete. Tested to
ICC-ES AC193. (Available September 2010).
Strut
Snake™ + Internally Threaded
Self-Tapping Anchor
Smart Dropin™+
Anchors
General Applications and Uses
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6304SD
6306SD
6308SD
6312SD
6320SD
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
7/16"
1-9/16"
5/8"
2"
13/16"
2-1/2" 1-3/16"
3-3/16" 1-3/8"
100
100
100
100
100
• Fire Sprinkler Systems • Pipe Supports
• Suspended Lighting
• Suspended Conduit
• Tension zone areas
• Cable Tray and Strut
• Interior applications/low level corrosion environment
• Seismic and wind loading applications
Anchor Materials:
Zinc Plated Carbon Steel
Pipe
Hangers
Part No.
Rod/Anchor Size Range:
3
/ 8" & ½" diameters.
Type 304 Stainless Steel Dropin+ (No Lip)
Part No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6204SD
6206SD
6208SD
6210SD
6212SD
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
7/16"
1-9/16"
5/8"
2"
13/16"
2-1/2" 1-3/16"
3-3/16" 1-3/8"
100
100
100
100
100
Type 316 Stainless Steel Dropin+ (No Lip)
Part No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6224SD
6226
6228
6230
6232
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
7/8"
1"
1"
1-9/16"
2"
2-1/2"
3-3/16"
7/16"
5/8"
13/16"
1-3/16"
1-3/8"
100
50
50
25
10
A Snake™ setting
tool is included
in each box of
anchors
Part
No.
Std
Box
11/16"
11/16"
29/32"
100
50
50
1/4"
3/8"
1/2"
6402SD
6407SD
6404SD
Extra setting Tool for 1/4" Snake™
Extra Setting Tool for 3/8" Snake™
Extra Setting Tool for 1/2" Snake™
1-5/8"
1-5/8"
2-1/2"
1
1
1
Concrete Vertigo+
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6324SD
6326SD
6328SD
1/4"
3/8"
1/2"
3/8"
1/2"
5/8"
1"
1-9/16"
2"
7/16"
5/8"
13/16"
100
50
5
Carbon Steel Coil Thread Dropin+ (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6330SD
6332SD
1/2"
3/4"
5/8"
1"
2"
3-3/16"
3/4"
1-1/4"
100
100
Washington D.C.
877-419-2755
Thread
Depth
6400SD
6401SD
6403SD
Carbon Steel Flanged Dropin+ (Lipped)
Philadelphia, PA
610-647-8070
Rod/Anchor Min. Hole
Size
Depth
Reliable performance in cracked or uncracked concrete.
Yellow Dichromate finish, Wedge-Bolt Blue Tipped Point.
Requires use of Wedge-Bit (included) for installation.
Part No.
Rod Dia.
7180SD
7181SD
7182SD
7198
1/4"
3/8"
1/2"
1/2"
Screw Shank
Size & Length
1/4" x 1-1/4"
1/4" x 1-1/2"
3/8" x 2-3/4"
Tools
PF-25DIAZ/DOM
PF-37DIAZ/DOM
PF-50DIAZ/DOM
PF-62DIAZ/DOM
PF-75DIAZ/DOM
Abrasives
Std. Box
OnSite
Supply
Drill Dia.
Point Style
Wedge-Bolt
Blue-Tip
Driver socket for Vertigo+
Safety
Bolt Size
See page 98 for a complete listing of Powers
Vertigo Rod Hanging Anchors
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
91
Rentals
Part No.
Fasteners
Domestic Drop-In Anchors (No Lip)
Anchors
POWERS® Dropin™+ / SNAKE™+ / Vertigo™+
Fasteners
red head™ multi-set drop-in anchors
Mult-Set II Drop-In Anchors
Hilti® Equivalents:
Multi-Set II®: Compare to HDI Anchors
Anchors
Plated
Steel Drop-In Anchor
(Lipped)
18-8 Stainless Steel Dropin (No Lip)
Strut
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RM-14
RM-38
RM-12
RM-58
RM-34
1/4"-20
3/8"-16
1/2"-13
5/8"-11
3/4"-10
3/8"
1/2"
5/8"
7/8"
1"
1"
1-5/8"
2"
2-1/2"
3-3/16"
3/8"
1/2"
3/4"
1"
1-1/4"
100
50
50
25
10
Plated
Steel Drop-In Anchor
(No Lip)
Threaded
Rod
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RL-14
RL-38
RL-12
RL-58
RL-34
1/4"-20
3/8"-16
1/2"-13
5/8"-11
3/4"-10
3/8"
1/2"
5/8"
7/8"
1"
1"
1-5/8"
2"
2-1/2"
3-3/16"
3/8"
1/2"
3/4"
1"
1-1/4"
100
50
50
25
10
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
SRM-14
SRM-38
SRM-12
SRM-58
SRM-34
1/4"-20
3/8"-16
1/2"-13
5/8"-11
3/4"-10
3/8"
1/2"
5/8"
7/8"
1"
1"
1-5/8"
2"
2-1/2"
3-3/16"
3/8"
1/2"
3/4"
1"
1-1/4"
100
50
50
25
10
316 Stainless Steel Dropin (No Lip)
Part No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
SSRM-38
SSRM-12
3/8"-16
1/2"-13
1/2"
5/8"
1-5/8"
2"
1/2"
3/4"
50
50
"Mini" Steel Drop-In
Anchor (Lipped)
Pipe
Hangers
Part No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RX-38
RX-12
3/8"-16
1/2"-13
1/2"
5/8"
3/4"
1"
3/8"
1/2"
100
50
RTX-138 Setting Tool for RX-38
RTX-112 Setting Tool for RX-12
Steel Coil
Thread Drop-In Anchor
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
CL-12
CL-34
1/2"-6
3/4"-4.5
5/8"
1"
2"
3-3/16"
3/4"
1-1/4"
50
10
Stop Overdrilling Holes for Drop-ins & Mini-Dropins
Tools
Setting Tools
Part No.:
RT-114
RT-138
RT-112
RT-158
RT-134
Anchor Size:
1/4"
3/8"
1/2"
5/8"
3/4"
Abrasives
Mini Dropin™
Internally Threaded
Expansion Anchors
SDS
Part No.
OnSite
Supply
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Sleeve
Depth
Std.
Box
6335
6322
6337
1/4"
3/8"
1/2"
3/8"
1/2"
5/8"
5/8"
3/4"
1"
3/8"
13/32"
5/8"
100
100
50
Safety
Setting Tool
Part No.:
6336
6323
6338
1/4"
3/8"
1/2"
3/8" x 1-1/16" Carbide Stop-Bit
207STP-8-27
1/2" x 1-11/16" Carbide Stop-Bit
Rentals
Hartford, CT
800-969-0285
for 1/4" Standard Drop-in anchors
for 3/8" Standard Drop-in anchors
207STP-10-33 5/8" x 2-1/16" Carbide Stop-Bit
for 1/2" Standard Drop-in anchors
Mini Drop-In Anchors
207STP-10-19 5/8" x 1-3/16" Carbide Stop-Bit
for 1/2" Mini Drop-in anchors
207STP-8-13
92
Standard Drop-In Anchors
207STP-6-17
Part No.
Anchor Size:
-Bit
Boston , MA
800-645-6155
1/2" x 13/16" Carbide Stop-Bit
for 3/8" Mini-Drop-in anchors
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Power-Stud™ Wedge Anchors
Threaded Rod and Studs
A torque-controlled, wedge expansion anchor
suitable for applications in solid and grout-filled
concrete masonry.
Rod Hanger, Powerstud® (for 3/8" Rod)
7806
1/2" x 2-3/8" 9/16"
MADE IN THE USA
Minimum
Embed
Std.
Box
2-1/4"
50
Studs
Double End Studs End
Tie Rods
Strut
Part Anchor Size Thread
Number (Drill Dia.) Depth
Available in Stainless
Steel and B7
AVAILABLE
ON REQUEST
Anchors
Rod Hanging Applications
Fasteners
Threaded Rod Anchoring
Lok-bolt™ Sleeve Anchors
Rod Hanging Applications
Threaded
Rod
Threaded rod in stock
6 ft / 10 ft / 12 ft lengths
Studs Cut to any length
1/4" x 1-1/2"
3/8" x 1-7/8"
1/2" x 2-1/4"
1-1/2"
1-5/8"
2-1/4"
50
50
25
Spike® Rod Hanging Anchors
A one-piece, tamper-proof, vibration resistant anchor for use in concrete, brick, block or stone. An
"S" shaped configuration at the working end of the
anchor creates an expansion mechanism. Suitable
for concrete, brick, block or stone.
Pipe Spike® Rod Hanging
Part
No.
Anchor
Size
Drill
Diameter
3755
3758
1/4"
3/8"
3/16"
1/4"
Setting Tool
1-1/4"
1-3/4"
100
50
Description
SPIKE Driver 1000
SPIKE® Driver 2000
®
Pipe SPIKE® Setting Tool
Part No.
Description
3760
Philadelphia, PA
610-647-8070
Pipe SPIKE® Setting Tool
Washington D.C.
877-419-2755
Technical Data
Load Chart for Threaded Rod - Low Carbon
Maximum Safe
Load Pounds 650O
Weight
per ft
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
240
300
730
1350
1810
2710
4480
5900
6230
9500
9000
13800
15700
20700
0.12
0.20
0.30
0.54
0.85
1.20
1.70
2.25
2.80
3.50
4.50
5.00
6.35
9.12
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Tools allow SPIKE® anchors to be installed in confined areas
and prevent damage to the fixture from stray hammer blows.
3790
3791
Carbon Steel
Plain • Zinc Plated
Hot Dip Galvanized
Stainless Steel
Type 304 • Type 316
B7 (ASTM A193)
Coil Thread (ASTM A108)
Nominal Rod Diameter
SPIKE™ Installation Tools
•
•
•
•
•
•
•
Min.
Std
Embed. Box
Spike® Driver
SPIKE® Driver
Part No.
Materials and Finishes
Tools
Std.
Box
Guide I.D.
1/2"
1/2"
Guide I.D.
5/16"
Abrasives
5810
5815
5825
Minimum
Embed
OnSite
Supply
Anchor
Size
Safety
Part
Number
Pipe
Hangers
Rod Hanger, Lok-Bolt™
93
Rentals
A pre-assembled, single-unit sleeve anchor available in carbon steel which can be used in concrete,
block, brick & stone.
Fasteners
SAMMYS™ THREADED ROD ANCHORING
Features and Benefits
Anchors
SAMMY'S
Threaded Rod Hangers
General Application & Uses
Strut
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
• One system for all rod hanging ap-
• Sidewinders are the side mount versions of the Sammys.
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are selfdrilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjustable torque, battery-powered screw
gun or hammer drill.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base
Steel Purlins & Beams,
Materials: Wood, Concrete
Vertical Applications
Threaded
Rod
SAMMY'S
SAMMY'S
Pipe
Hangers
Model GST Wood Vertical Hangers
Model DST, DSTR & TEK Steel Vertical Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
DST - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Tools
Abrasives
GST .750
GST 100
GST 200
GST 300
GST 600
GST .75
GST 10
GST 20
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
GST 25-380 3/8"
3/8"
GST 30
3/8"
GST 40
GST 60
3/8"
GST 2
1/2"
GST 2.5-380 1/2"
GST 3
1/2"
GST 4
1/2"
GST 6
1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/4"
#14
1"
#14
2"
#14
3"
#14
6"
#14
3/4"
#14
1"
#14
2"
#14
2-1/2" #14
#14
3"
#14
4"
6"
#14
2"
#14SW
2-1/2" #14SW
3"
#14SW
4"
#14SW
6"
#14SW
—
—
—
—
—
—
—
UL, FM, NFPA
UL, NFPA
UL, FM, NFPA
NFPA
NFPA
—
—
—
—
—
Packaged 25 per box.
Model No.
Rod
Dia.
Screw Shank Nut
Size & Length Driver Approvals
CST 200
CST 20
CST 2
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty
status. Please see page 97 for ordering information
OnSite
Supply
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank
Nut
Model No. Dia. Size & Length Driver Approvals
DSTR 100 1/4"
DST 100
1/4"
1/4"
DST 150
1/4"
DST 200
DST 250
1/4"
DST 300
1/4"
TEK 500
1/4"
DSTR 1-1/2" 3/8"
DSTR 1"
3/8"
DSTR 516 3/8"
3/8"
DST 10
3/8"
DST 15
DST 20
3/8"
3/8"
DST 25
DST 30
3/8"
DST 516
3/8"
TEK 50
3/8"
DST 2.0
1/2"
DST 2.5
1/2"
DSTR 1.0 1/2"
DSTR 5.16 1/2"
DST 5.16 1/2"
TEK 5.0
1/2"
SAMMY'S
Model CST Concrete Vertical Hangers
Safety
Rentals
94
1/4"
3/8"
1/2"
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14SW
Hartford, CT
800-969-0285
—
FM
—
Boston , MA
800-645-6155
#14
1/4-20 x 1"
—
1/4-14 x 1"
#14
—
1/4-14 x 1-1/2" #14
—
1/4-14 x 2"
#14
—
1/4-12 x 2-1/2" #14
—
1/4-14 x 3"
#14
—
12-24 x 1-1/2" #14
—
12-24 x 1-1/2" #14 UL, FM, NFPA
#14 UL, FM, NFPA
1/4-20 x 1"
5/16"-18 x 1-1/4" #14 UL, NFPA
#14 NFPA
1/4-14 x 1"
1/4-12 x 1-1/2" #14 NFPA
1/4-14 x 2"
#14 NFPA
1/4-14 x 2-1/2" #14 NFPA
1/4-14 x 3"
#14 NFPA
5/16"-18 x 1-1/4" #14 UL, NFPA
12-24 x 1-1/2"
#14 FM, NFPA
1/4-14 x 2"
#14SW
—
1/4-14 x 2-1/2" #14SW
—
1/4-20 x 1"
#14SW
—
5/16"-18 x 1-1/4" #14SW
—
5/16"-18 x 1-1/4" #14SW
—
12-24 x 1-1/2" #14SW
—
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SWG 10
SWG 20
3/8"
3/8"
SWG 25-380 3/8"
SWG 30
3/8"
#14SW
#14SW
—
—
1/4"
1/4"
3/8"
1/4"
#14SW
#14SW
#14SW
#14SW
—
NFPA
NFPA
—
x
x
x
x
1"
2"
2-1/2"
3"
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Model No.
Rod Screw Shank
Dia. Size & Length
Approvals
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
NFPA
NFPA
NFPA
NFPA
UL, NFPA
UL, NFPA
UL, NFPA
NFPA
SWD 10
SWD 15
SWD 20
SWD 516
SWDR 1-1/2"
SWDR 1"
SWDR 516
SWT 15
1/4-14 x 1"
1/4-14 x 1-1/2"
1/4-14 x 2
5/16-18 x 1-1/4"
1/4-20 x 1"
1/4-20 x 1-1/2"
5/16-18 x 1-1/4"
12-24 X 1-1/2"
17°
Deflection
From
Vertical
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Model No.
SH-GST 20
SH-GST 22SS
SH
-GST 30
SH-GST 30SS
8113910
Rod
Dia.
Material
Screw Shank
Size & Length
1/4"
1/4"
1/4"
1/4"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
#14 (Black) Nut Driver
x
x
x
x
2"
2"
3"
3"
17°
Deflection
From
Vertical
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Model No.
Rod
Dia.
Material
Screw Shank
Size & Length
1/4" x 1"
1/4" x 1"
Zinc Plated Steel 3/8"
SH-DSTR 1
3/8"
SH-DSTR 1-SS Stainless Steel
8113910 #14 (Black) Nut Driver
For Wood and Concrete
89°
Deflection
From
Vertical
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Model No.
Rod
Dia.
Screw Shank Nut
Size & Length Driver Approvals
8017925
SWC 200
SWC 20
1/2"
1/4"
3/8"
1/4" x 6"
#14SW
5/16" x 1-1/2" #14SW
5/16" x 1-1/2" #14SW
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
—
—
NFPA
Threaded
Rod
1/4" x 1"
1/4" x 2"
Pipe
Hangers
SWG 100 1/4"
SWG 200 1/4"
Screw Shank Nut
Size & Length Driver Approvals
Tools
Rod
Dia.
Abrasives
Model No.
Model No.
SH-GST/CST 20
SH-GST/CST 2.0
8273910
3/8"
1/4" x 1-3/4"
1/2"
1/4" x 1-3/4"
#14SH Orange Nut Driver
Rod
Dia.
Screw Shank
Size & Length
Complete technical specifications are available:
Contact your Sales Person or Customer Service for
more information, including Sammys® products tested
for seismic restraint
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
95
OnSite
Supply
Self-threading into wood. No pre-drilling required. 25/box
Safety
Model SWG Wood SIDEWINDERS™ Hangers
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
Rentals
SAMMY'S
Anchors
Swivel Head™
SAMMY'S Hangers
Strut
Sammys™ Sidewinders™
Fasteners
SAMMYS™ THREADED ROD ANCHORING
Fasteners
SAMMYS™ THREADED ROD ANCHORING
Anchors
SAMMY XPress™ Sidewinder Hangers
SAMMY Xpress
installation sequence
Strut
Threaded
Rod
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal attachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY Xpress
Universal Tool
SAMMY XPress™ Hangers
Pipe
Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Tools
Model
No.
Rod Screw Shank
Gauge Dia. Size & Length
XP 20
XP 35
XPIT
XPDB
22-20 3/8" 1/4-20 x 1-1/8"
UL, NFPA
18-16 3/8" 1/4-20 x 1-1/8"
UL, NFPA
Sammy X-Press Universal Installation Tool
25/34" Drill Bit
Model
No.
Rod
Gauge Dia.
SWXP
XPIT
16-12 3/8" 1/4-20 x 1-1/8"
UL
Sammy X-Press Universal Installation Tool
Screw Shank
Size & Length
Approvals
Approvals
Swivels up to 89°
Abrasives
SH-TEK 50
™
SAMMY'S Swivel Head
Hangers
Metal Deck, Min 22 ga.
Tested to Zone 4 Seismic Requirements
OnSite
Supply
Safety
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material engagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod
Screw Shank
Part No.
Dia.
Size & Length
Rentals
8268957
8270957
8273910
96
3/8"
12-24 x 1-5/8"
1/2"
12-24 x 1-5/8"
#14SH Orange Nut Driver
Hartford, CT
800-969-0285
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Approvals
UL
UL
Part
No.
8294922
8295922
8272957
8271957
XPIT
Boston , MA
800-645-6155
Rod
Dia.
Pipe
Size
Gauge
Test
Load
3/8"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
1/2"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
Sammy X-Press Universal Installation Tool
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Wood/Concrete Installation Kit for SAMMY'S and
SAMMY SIDEWINDERS
Anchors
Saves Time and Money… Convenient… Easy to Use!
• Concrete/Wood Installation Kit includes 1/4" Drill Bit, 1/4" SDS Drill Bit, 7/32"
Wood Bit, Sleeve, 1/4" Bit Receiver, #14 Nut Driver, #14SW Nut Driver.
Part No.
8122910
Fasteners
SAMMYS™ installation accessories
Concrete/Wood Installation Kit
Kit Includes the Following Items
Strut
#14 Black Nut Driver (b)
#14 SW Red Nut Driver (c)
#250 Bit (1/4") (d)
SDS Bit (1/4") (e)
7/32" Wood Bit (f)
HEX 250 Bit Receiver (g)
SL 250 Sleeve (h)
SAMMY'S
Not Included in Kit
8121910
SDS B250 Bit Receiver (1/4")
8194910
UXPIT Universal
X-Press It Tool
8195910
Retro Socket for
8151910 (Old Tool)
8152910
25/64" Drill Bit
Part No.
#14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with
Sidewinders and 1/2" rod SAMMY'S. (See
individual SAMMY'S Listing for correct
Nut Driver).
Speedy Pole Tool & Socket
8114910
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Universal Installation Kit
Model No.
130
131
132
133
138
3004
Speedy Pole Tool 6' (3' - 6')
Speedy Pole Tool 12' (4' - 12')
Speedy Pole Tool 18' (6' - 18')
Speedy Pole Tool 24' (8' - 24')
SAMMYS™ Socket Driver
Ceiling Wire Socket Driver
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
#14
8113910
Part No.
™
Tools
• #14 (Black) Nut Driver, for use with SAMMYS™ & Swivel Head™ SAMMYS™. (See
individual SAMMY'S Listing for correct
Nut Driver).
Abrasives
SAMMY'S Nut Drivers
#14SW (Red) Nut Driver
OnSite
Supply
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes
into contact with the material you are installing
into, continue drilling until nut driver spins free.
Installation is then complete.
#14SW
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
Safety
SAMMY'S X-Press It®
Universal Installation Tool
Hammer Drill Into Concrete
Pipe
Hangers
Rotary Hammer Drill Into Concrete
Part No.
Threaded
Rod
8113910
8114910
8116910
8117910
8118910
8120910
8098910
Model No.
SPE139 Universal Installation Kit
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
97
Rentals
Fasteners
vertigo™ THREADED ROD ANCHORING
Steel Vertical Hanger
Anchors
Steel Side Hanger
Wood Vertical Hanger
Wood Side Hanger
Strut
Concrete Vertical Hanger
Vertigo™
Rod Hanging Systems
Concrete Vertical Hanger
One-piece, all-steel threaded fastening
system for suspending steel threaded
rod vertically overhead in pipe-hanging,
fire protection, electrical conduit and
cable tray applications.
Anchor Materials:
Zinc Plated Carbon Steel
Size Range:
¼" to ½" Threaded Rod
Suitable Base Materials:
Steel Purlins & Beams, Wood & Timber,
Concrete, Hollow Plank Concrete
Threaded
Rod
Pipe
Hangers
Part
No.
7155
7157
7158
7159
7160
7152
7154
7161
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
3/8"
1/4"
3/8"
1/2"
Part
No.
Rod
Dia.
Screw Shank
Size & Length
Point
Style
7171
7173
7175
1/4"
3/8"
1/2"
1/4" x 1-1/4"
1/4" x 1-1/2"
3/8" x 2-3/4"
Wedge
Bolt
OT
Concrete Vertigo+
Steel Vertical Hanger (#3 for Purlins, #5 for
Beams - Packaged 100/box
For side mount concrete applications use Catalog No.
7185 and 7170 with a 1/4" ANSI Drill Bit
Reliable performance in cracked or uncracked concrete.
Yellow Dichromate finish, Wedge-Bolt Blue Tipped Point.
Requires use of Wedge-Bit (included) for installation.
Screw Shank
Point
Size & Length
Style
1/4"-20 x 1"
#3
1/4"-20 x 2"
#3
1/4"-20 x 1" (w/nut) #3
1/4"-20 x 1-1/2"
#3
1/4"-20 x 1-1/2" (w/nut) #3
12-24 x 1-1/2"
#5
12-24 x 1-1/2" (w/nut) #5
12-24 x 1-1/2" (w/nut) #5
Part No.
Rod Dia.
7180SD
7181SD
7182SD
7198
1/4"
3/8"
1/2"
1/2"
Tools
Abrasives
Part
No.
7183
7184
7186
7188
7200
7201
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
1/4"
3/8"
OnSite
Supply
Part
No.
7163
7203
7165
7167
7169
7162
7164
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
Screw Shank
Point
Size & Length
Style
1/4"-20 x 1"
#3
1/4"-20 x 1" (w/nut) #3
1/4"-20 x 1-1/2"
#3
1/4"-20 x 1-1/2" (w/nut) #3
12-24 x 1-1/2"
#5
12-24 x 1-1/2" (w/nut) #5
Screw Shank
Size & Length
1/4" x 2"
1/4" x 1"
1/4" x 2"
1/4" x 3"
1/4" x 4"
3/8" x 2-1/2"
3/8" x 2-1/2"
Safety
Rentals
98
Part
No.
7185
7205
7170
7156
Rod
Dia.
1/4"
3/8"
3/8"
3/8"
Screw Shank
Size & Length
1/4" x 1"
1/4" x 1"
1/4" x 2"
1/4" x 2-1/2"
Hartford, CT
800-969-0285
Driver socket for Vertigo+
• 500 - 1500 RPM
• Universal socket: color-coded Red,
Concrete socket: color-coded Blue.
Universal Steel
& Wood Socket
Part
No.
Concrete Socket
1/4", 3/8" or 1/2"
Point
Style
Type 17
Type 17
Type 17
Type 17
Type 17
Type 17
Type 17
Point
Style
Type 17
Type 17
Type 17
Type 17
7187
7195
7197
7198
Std
Box
Universal Steel &
Wood Socket
1/4" Concrete Socket
3/8" Concrete Socket
1/2" Concrete Socket
5
5
5
5
Pole Tool
• Pole Tool extends reach 6' to 12'. Includes three Jaw Chuck
Part No.
7166
Red
Universal
Driver
Wood Side Hanger- Packaged 100/box
Wedge-Bolt
Blue-Tip
Drive Sockets
Wood Vertical Hanger- Packaged 100/box
Point Style
Installation Accessories
Steel Side Hanger (#3 for Purlins, #5 for Beams)
- Packaged 100/box
Screw Shank
Size & Length
1/4" x 1-1/4"
1/4" x 1-1/2"
3/8" x 2-3/4"
Std. Box
Pole Tool
Sleeve
Assembly
(5874)
1
Vertigo™ Tool Kit #5864
• Sleeve assembly, (same as cat.
#5874) 1/4" and 3/8" blue concrete
drive sockets and red universal drive
socket. (SDS Drill bit not included).
Part
No.
1/4" & 3/8" Blue
Concrete Driver
Boston , MA
800-645-6155
Std
Box
#5864 1/4" x 6" Hex Shank 1
SDS Drill Bit
#5874 Sleeve Assembly only 1
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
99
Fasteners
Rentals
Safety
OnSite
Supply
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
Strut
Anchors
vertigo™ THREADED ROD ANCHORING
Fasteners
Tapcon® screw anchor
Anchors
Strut
3/16" diameter uses a
#2 phillips flat head (PFH)
1/4" diameter uses a
#3 phillips flat head (PFH)
3/16" diameter has a 1/4" slotted hex
washer head (HWH)
1/4" diameter has a 5/16" slotted hex
washer head (HWH)
C1000 Kit (Does not include drill bit
Tapcon® Screw Anchors
Threaded
Rod
The "original masonry" anchor that cuts its own threads into concrete, brick, or block.
Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It
is essential to use the Condrive tool and the correct drill bit to assure consistent anchor
performance. Packaged 100 per box
Pipe
Hangers
Anchor Materials:
Carbon Steel, 410 Stainless Steel
Size Range:
3
⁄ 16" and ¼" diameters. 1¼" to 6 lengths
Suitable Base Materials:
Concrete, Masonry
Tools
Abrasives
OnSite
Supply
HW3-114
HW3-134
HW3-214
HW3-234
HW3-314
HW4-114
HW4-134
HW4-214
HW4-234
HW4-314
HW4-334
HW4-400
HW4-500
HW4-600
Phillips
Part No.
PF3-114
PF3-134
PF3-214
PF3-234
PF3-314
PF4-114
PF4-134
PF4-214
PF4-234
PF4-314
PF4-334
PF4-400
PF4-500
PF4-600
Size
(Inch)
Fixture
Thickness
3/16 x 1-1/4 0"-1/4"
3/16 x 1-3/4 1/4"-3/4"
3/16 x 2-1/4 3/4"-1-1/4"
3/16 x 2-3/4 1-1/4"-3-1/4"
3/16 x 3-1/4 1-3/4"-2-1/4"
1/4 x 1-1/4 0"-1/4"
1/4 x 1-3/4 1/4"-3/4"
1/4 x 2-1/4 3/4"-1-1/4"
1/4 x 2-3/4 1-1/4"-3-1/4"
1/4 x 3-1/4 1-3/4"-2-1/4"
1/4 x 3-3/4 2-1/4"-2-3/4"
1/4 x 4
2-1/2"-3"
1/4 x 5
3-1/2"-4"
1/4 x 6
4-1/2"-5"
Bit
Length
Tapcon
Drill Bit
3-1/2"
3-1/2"
4-1/2"
4-1/2"
5-1/2"
3-1/2"
3-1/2"
4-1/2"
4-1/2"
5-1/2"
5-1/2"
5-1/2"
6-1/2"
7-1/2"
7900814
7900814
7900818
7900818
7900822
7901014
7901014
7901018
7901018
7901022
7901022
7901022
7901026
7901030
Stainless Steel Tapcon® Screw Anchors Selection Guide
Safety
Hex Head
Part No.
Phillips
Part No.
SHW4-114
SHW4-134
SHW4-214
SHW4-234
SHW4-314
SHW4-334
SPF4-114
SPF4-134
SPF4-214
SPF4-234
SPF4-314
SPF4-334
Rentals
100
Size
(Inch)
1/4
1/4
1/4
1/4
1/4
1/4
x
x
x
x
x
x
1-1/4
1-3/4
2-1/4
2-3/4
3-1/4
3-3/4
(C)
(A)
(E)
(B)
Condrive 1000
Installation Tool
Carbon Steel Tapcon® Screw Anchors Selection Guide
Hex Head
Part No.
(D)
Fixture
Thickness
Bit
Length
Tapcon
Drill Bit
0"-1/4"
1/4"-3/4"
3/4"-1-1/4"
1-1/4"-3-1/4"
1-3/4"-2-1/4"
2-1/4"-2-3/4"
3-1/2"
3-1/2"
4-1/2"
4-1/2"
5-1/2"
5-1/2"
7901014
7901014
7901018
7901018
7901022
7901022
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
• Fast change from drilling to driving
• Eliminates need to change out chuck
and bits.
• Eliminates need for two tools.
• Special nut driver is recessed for
torque control to reduce head
breakage.
• Includes bits for all sizes hex & Phillips head.
Part No.
035800 C1000 Installation Tool Kit
7901001 Drill Adapter (A)
7901002 Sleeve (B)
7901003 Black Band
7901004 5⁄ 32" Ball Bearing
7901006 3⁄ 16" Socket (C)
7901007 ¼" Socket (D)
7901008 #2 Phillips Bit for 3⁄ 16" Anchor
7901009 #3 Phillips Bit for ¼" Anchor
7901010 Phillips Socket (E)
7902006 Set Screw
7902008 1⁄ 16" Ball Bearing
7902010 1⁄ 8" Hex Key
Tapcon SDS Bits
Part No.
Description
790059 7" (for use with 3⁄ 16" Tapcon)
7901060 5" (for use with ¼" Tapcon)
7901059 7" (for use with ¼" Tapcon)
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
The Tapper fastening system is a complete family of screw anchors for light to
medium duty applications in concrete, masonry block and brick base materials. The Tapper is fast and easy to install and provides a neat, finished appearance. The Tapper screw anchor is engineered with matched tolerance drill bits
and installation tools designed to meet the needs of the user and also provide
optimum performance.
Zinc Plated Carbon Steel
Anchor Materials:
Fasteners
Tapper™ Concrete Screw Anchor
Anchors
Tapper® concrete screw anchors
Size Range:
3/16" diameter x 1 1/4" length to 3/8" diameter x 6" length
Perma-Seal Coated
Suitable Base Materials:
Normal-Weight Concrete, Structural Lightweight Concrete, Grouted Concrete Masonry, Hollow Concrete Masonry, Solid Brick Masonry
HEX
PFH
HEX
PFH
HEX
PFH
HEX
PFH
HEX
PFH
2740
2400
2440
N/A
2498
N/A
N/A
N/A
N/A
4180
4185
3/16" x 1-3/4"
2702
2742
2402
2442
N/A
2500
N/A
N/A
N/A
N/A
4181
4186
3/16" x 2-1/4"
2704
2744
2404
2444
N/A
2501
N/A
N/A
N/A
N/A
4182
4187
3/16" x 2-3/4"
2706
2746
2406
2446
N/A
2502
N/A
N/A
N/A
N/A
4183
4188
3/16" x 3-1/4"
2708
2748
2408
2448
N/A
2503
N/A
N/A
N/A
N/A
N/A
N/A
3/16" x 3-3/4"
2710
2750
2410
2450
N/A
2504
N/A
N/A
N/A
N/A
N/A
N/A
3/16" x 4"
2712
2752
2412
2449
N/A
2505
N/A
N/A
N/A
N/A
N/A
N/A
1/4" x 1-1/4"
2720
2760
2420
2460
2486
2506
N/A
N/A
2880
2887
4110
4118
1/4" x 1-3/4"
2722
2762
2422
2462
2488
2507
9977
9972
2881
2888
4112
4120
1/4" x 2-1/4"
2724
2764
2424
2464
2490
2508
9978
9976
2882
2889
4114
4123
1/4" x 2-3/4"
2726
2766
2426
2466
2492
2509
N/A
N/A
2883
2890
4116
4124
1/4" x 3-1/4"
2728
2768
2428
2468
2494
2510
N/A
N/A
N/A
N/A
N/A
4125
1/4" x 3-3/4"
2730
2770
2430
2470
2495
2511
N/A
N/A
N/A
N/A
4119
N/A
1/4" x 4"
2732
2772
2434
2472
2496
2512
N/A
N/A
N/A
N/A
N/A
N/A
1/4" x 5"
N/A
2774
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1/4" x 6"
N/A
2776
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
† 304 Stainless Steel Tapper screws require the use of special Tapper Drill Bits. These bits are gold or silver colored for easy
identification. They cannot be used with Perm-Seal Tapper or the 410 Stainless Steel Tapper
HEX
PFH
HEX
PFH
3/16" x 1-1/4"
Size
2700SD
2740SD
1/4" x 1-3/4"
2722SD
2762SD
3/16" x 1-3/4"
2792SD
2742SD
1/4" x 2-1/4"
2724SD
2764SD
3/16" x 2-1/4"
2704SD
2744SD
1/4" x 2-3/4"
2726SD
2766SD
3/16" x 2-3/4"
2706SD
2746SD
1/4" x 3-1/4"
2728SD
2768SD
3/16" x 3-1/4"
2708SD
2748SD
1/4" x 3-3/4"
2730SD
2770SD
3/16" x 3-3/4"
2710SD
2750SD
1/4" x 4"
2732SD
2772SD
3/16" x 4"
2712SD
2752SD
1/4" x 5"
2734SD
2774SD
1/4" x 1-1/4"
2720SD
2760SD
1/4" x 6"
—
2776SD
Philadelphia, PA
610-647-8070
Size
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Tapper™ + Concrete Screw
Anchor
New Strength Design Tapper Screws
feature a stronger head design, and a
gimlet point with new thread design
for lower installation torque required
to install. Improved Perma-Seal
coating provides superior corrosion
resistance.
Hartford, CT
800-969-0285
101
Pipe
Hangers
PFH
2700
Tools
HEX
3/16" x 1-1/4"
Abrasives
410 Stainless
OnSite
Supply
304 Stainless†
Safety
Bronze
(Flange Head)
Rentals
Standard Pack: Tappers - Slotted Hex Head and Phillips Flat Head
100 Screws & 1
White
Blue
Silver
Drill Bit
Perma-Seal
Perma-Seal
Perma-Seal
304 Stainless Steel
Threaded
Rod
410 Stainless Steel
Tapper + will be replacing Blue Perma-Seal Tappers. Orders for Blue Perma-Seal
Tappers will automatically be substitiuted with Tapper + as stock becomes available
Size
Strut
Zinc Plated Carbon Steel, Perma-Seal Carbon Steel. Type 410 Stainless Steel, Type
304 Stainless Steel
Fasteners
spike® pre-expanded anchors
Mushroom Head Type 316 Stainless Steel SPIKE®
Part
No.
Anchors
SPIKE® Pre-Expanded Anchor
Strut
Threaded
Rod
A one-piece, tamper-proof vibration resistant anchor for
use in concrete, block, brick or stone. The SPIKE® anchor is
formed with an "s" shaped configuration at the working end
of the anchor to create an expansion mechanism. Since the
anchor is pre-expanded, there is no secondary tightening
operation required.
Anchor Materials:
Carbon Steel and Type 316 Stainless Steel
Size Range:
3/16" x 1" to 1/2" x 6-1/2"
Suitable Base Materials:
Concrete, Block, Brick, Stone
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
5502
5503
5504
5506
5508
5510
5511
5512
5522
5523
5524
5526
5528
5530
5531
5532
5546
5548
5550
5551
5552
5554
5556
5569
5571
5572
5574
5577
Size
Min.
Embed
Drill
Dia.
Std
Box
3/16" x 1"
3/16" x 1-1/4"
3/16" x 1-1/2"
3/16" x 2"
3/16" x 2-1/2"
3/16" x 3"
3/16" x 3-1/2"
3/16" x 4"
1/4" x 1"
1/4" x 1-1/4"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 2-1/2"
1/4" x 3"
1/4" x 3-1/2"
1/4" x 4"
3/8" x 2"
3/8" x 2-1/2"
3/8" x 3"
3/8" x 3-1/2"
3/8" x 4"
3/8" x 5"
3/8" x 6"
1/2" x 2-3/4"
1/2" x 3-1/2"
1/2" x 4"
1/2" x 5"
1/2" x 6-1/2"
7/8"
7/8"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
7/8"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
25
25
25
25
25
25
25
25
25
25
25
25
Rentals
The published length is measured from below the head to the
end of the anchor
102
6602
6603
6604
6606
6623
6624
6626
6628
6630
6646
6648
6650
Min.
Embed
Drill
Dia.
Std
Box
3/16" x 1"
3/16" x 1-1/4"
3/16" x 1-1/2"
3/16" x 2"
1/4" x 1-1/4"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 2-1/2"
1/4" x 3"
3/8" x 2"
3/8" x 2-1/2"
3/8" x 3"
7/8"
7/8"
1-1/4"
1-1/4"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-3/4"
1-3/4"
1-3/4"
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
100
100
100
100
100
100
100
100
100
25
25
25
Flat Head Grade 8.2 Carbon Steel SPIKE®
Mushroom Head Grade 8.2 Carbon Steel SPIKE®
Part
No.
Size
Hartford, CT
800-969-0285
Part
No.
5608
5610
5612
5624
5626
5628
5630
5631
5632
Size
Min.
Embed
Drill
Dia.
Std
Box
3/16" x 2-1/2"
3/16" x 3"
3/16" x 4"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 2-1/2"
1/4" x 3"
1/4" x 3-1/2"
1/4" x 4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
100
100
100
100
100
100
100
100
100
The published length is the overall length of the anchor
Tie-Wire Spike®
Part
No.
Anchor
Size
Drill
Diameter
3756
3759
3/16"
1/4"
3/16"
1/4"
Setting Tool
Min.
Std
Embed. Box
1-1/4"
1-1/4"
100
100
Spike® Driver
SPIKE™ Installation Tools
Tools allow SPIKE® anchors to be installed in confined areas
and prevent damage to the fixture from stray hammer blows.
SPIKE® Driver
Part No.
3790
3791
Description
SPIKE Driver 1000
SPIKE® Driver 2000
®
Pipe SPIKE® Setting Tool
Part No.
Description
3760
Boston , MA
800-645-6155
Pipe SPIKE Setting Tool
®
Washington D.C.
877-419-2755
Guide I.D.
1/2"
1/2"
Guide I.D.
5/16"
Philadelphia, PA
610-647-8070
2839
2840
2842
2844
2846
2848
2850
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
x
x
x
x
x
x
x
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/4"
3"
Zamac Hammers-Screw® Anchor
Mushroom Head with #2 Phillips
Type Screw
Part No.
Size
2842
2431
2451
2808
2820
Zamac Nailin® Anchor Mushroom
Head with Carbon Steel Nail
Part No.
Size
3/16" x 1"
3/16" x 1-1/2"
1/4" x 1"
1/4" x 1-1/2"
2802
2806
2808
2814
2820
2826
2804
3/16" x 7/8"
1/4" x 3/4"
1/4" x 1"
1/4" x 1-1/4"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 3"
2836
2838
1/4" x 1-1/2"
1/4" x 2"
Zamac Nailin® Anchor Flat Head with
Carbon Steel Nail
Part No.
Size
2836
2838
2523
2543
Philadelphia, PA
610-647-8070
1/4" x 1"
1/4" x 1-1/2"
Fasteners
Anchors
1/4" x 1-1/2"
1/4" x 2"
Nylon Nailin® Anchor Mushroom
Head with Carbon Steel Nail
Part No.
Size
Strut
Nylon Nailin® Anchor Flat Head with
Carbon Steel Nail
Part No.
Size
1/4" x 1-1/4"
Nylon Nailin® Anchor Mushroom
Head with Stainless Steel Nail
Part No.
Size
Threaded
Rod
Suitable Base Materials:
Concrete, Block, Brick, Stone
Nylon Nailin® Anchor Round Head
with Carbon Steel Nail
Part No.
Size
Tools
Suitable Base Materials:
Concrete, Block, Brick
A tamper-proof nail drive anchor which
has a body formed from Zamac alloy.
Nails are available in carbon or stainless steel. The anchor may be used in
concrete block, brick or stone. Not recommended for overhead applications.
Packaged 100/box. Master packs of
1000 also available.
Anchor Materials:
Zamac Alloy with Carbon or Stainless
Steel Drive Pin
Size Range:
3/16" x 7/8" to 1/4" x 2"; Drill diameter
is same as anchor diameter.
Washington D.C.
877-419-2755
2433
2513
2523
2543
2563
2573
2583
2593
3/16" x 1"
1/4" x 3/4"
1/4" x 1"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 3"
1/4" x 4"
1/4" x 6"
Boston , MA
800-645-6155
Abrasives
Zamac Hammers-Screw® Anchor
Mushroom Head with #2 Phillips
Type Carbon Steel Screw
Part No.
Size
Body is formed from engineered nylon
and nails available in carbon and stainless steel. The anchor may be used in
concrete block or brick. Not recommended for overhead applications.
Packaged 100/box.
Anchor Materials:
Engineered Nylon with Carbon or
Stainless Steel Drive Pin
Size Range:
3/16" x 1" to 1/4" x 6"; Drill diameter is
same as anchor diameter.
OnSite
Supply
Suitable Base Materials:
Concrete, Block, Brick, Stone
Zamac Nailin® Anchor
Zamac Nailin® Anchor Mushroom
Head with Stainless Steel Nail
Part No.
Size
2858
2864
2870
2876
Hartford, CT
800-969-0285
1/4"
1/4"
1/4"
1/4"
x
x
x
x
1"
1-1/4"
1-1/2"
2"
103
Safety
Unique one-step drive anchor featuring
a Phillips style head and a screw thread
for use in concrete block, brick or stone.
Body is formed from corrosion resistant
Zamac alloy with carbon or stainless
steel drive screw and has been developed as an improvement over standard
nailin anchors. The anchor is removable,
has a 40% higher tension load capacity
when installed in concrete. Packaged
100/box. Master packs of 1000 also
available.
Anchor Materials:
Zamac Alloy with Carbon Steel and
Perma-Seal Drive Screw
Size Range:
1/4" x 3/4" to 1/4" x 3"; 1/4" Drill Dia.
Nylon Nailin® Anchor
Rentals
Zamac Hammer-Screw®
Nail Anchor
Pipe
Hangers
zamac/nylon nailin™ anchors
Fasteners
Safe-T+ Pin / expansion shield anchors
Anchors
Single™ Shell Expansion Anchors
Safe-T+ Pin
Strut
Threaded
Rod
A one-piece, all steel, nail drive anchor that can be used
in concrete, block, brick or stone. Each box of Safe-T Pins
comes with a 6 mm SDS Carbide drill bit for ease of installation. Typical applications include HVAC Duct straps, light to
medium duty signage, and termination bar, flooring ECT.
A machine bolt anchor designed for use in concrete, block,
brick or stone. Consisting of a pre-assembled set of expansion shields and an expander cone formed of Zamac Alloy. As
the anchor is tightened, the wedge shaped cone is drawn into
the shields, compressing them against the base material. Not
recommended for use in overhead applications.
Anchor Materials:
Carbon Steel
Size Range:
1/4" x 1-3/4", 1/4" x 2-1/2"
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Block, Brick and Stone
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
Pipe
Hangers
Part No.
Size
Std. Box
2800SD
6mm (1/4") x 1-3/8"
100
2801SD
6mm (1/4") x 2-1/2""
100
2800
Part
No.
6 mm SDS Drill Bit
9650
9655
9665
9675
9685
9695
Rod/Anchor Drill
Dia.
Dia.
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
1/2"
5/8"
5/8"
7/8"
1"
1-1/4"
Overall
Length
Thread
Depth
Std.
Box
1-3/8"
1-5/8"
1-5/8"
2-1/2"
2-3/4"
2-7/8"
1-3/8"
1-5/8"
1-3/4"
2-1/4"
2-1/2"
2-1/2"
50
50
50
25
25
10
Tools
Lag Shield™ Shell Expansion Anchor
Abrasives
A screw style anchor designed for use with lag bolts. Suitable
for use in concrete and the mortar joints of block or brick
walls. In harder masonry materials, short style Lag Shields
are used to reduce drilling time. The long style version is used
in soft or weak masonry to better develop strength.
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
OnSite
Supply
Safety
Rentals
Part
No.
1051
1055
1101
1105
1151
1155
1201
1205
1251
1255
1301
1355
104
Size
1/4" Short
1/4" Long
5/16" Short
5/16" Long
3/8" Short
3/8" Long
1/2" Short
1/2" Long
5/8" Short
5/8" Long
3/4" Short
3/4" Long
Length
1/2"
1"
3/4"
1"
1"
1-1/2"
1-1/8"
1-7/8"
1"
2-1/4"
1-1/8"
2-1/4"
Thread
Length
1"
1-1/2"
1-1/4"
1-3/4"
1-3/4"
2-1/2"
2"
3"
2"
3-1/2"
2"
3-1/2"
Hartford, CT
800-969-0285
Drill
Dia.
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
Std
Box
50
50
50
50
50
50
50
50
25
25
25
25
Double™ Shell Expansion Anchors
A dual expansion machine bolt anchor particularly suited for
materials of questionable strength. It can be used in solid concrete, block, brick and stone. Job site tests are recommended
when used in base materials of questionable strength.
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
Part
No.
9510
9515
9520
9525
9530
9535
Boston , MA
800-645-6155
Rod/Anchor Drill
Dia.
Dia.
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
Overall
Length
1/2"
1-3/8"
5/8"
1-5/8"
3/4"
2"
7/8"
2-1/2"
1"
3-3/4"
1-1/4" 3-15/16"
Washington D.C.
877-419-2755
Thread
Depth
Std.
Box
1-1/4"
1-1/2"
1-3/4"
2-1/4"
2-1/2"
2-1/2"
50
50
50
25
25
10
Philadelphia, PA
610-647-8070
Calk-In™ Machine Screw Anchor
Hollowset Dropins™
Anchors
A pre-assembled precision cast calking type machine bolt
anchor which can be used in concrete, block, brick or
stone. Not recommended for overhead applications.
Anchor Materials:
Antimonial Lead Alloy Anchor Body and Zamac Alloy Cone
Suitable Base Materials:
Fasteners
hollow-set™ dropin™ anchors
Drill Dia
Std. Box
9205
9210
9220
9225
9230
9240
#8-32
#10-24
1/4"-20
5/16"-18
3/8"-16
1/2"-13
1/2"
5/8"
7/8"
1"
1-1/4"
1-1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
3/4"
100
100
100
50
50
50
Setting Tool
Anchor Size:
#10
9222
9226
9231
9241
1/4"
5/16"
3/8"
1/2"
Concrete, Pre-Cast Hollow Core Plank, Hollow Concrete
and Brick Masonry
Hollow-Set Dropin with
Carbon Steel Cone
Screw Anchor Expanders
for Caulking Anchors
Quickly and securely set expansive
screw anchors in masonry, regardless of thickness.
Part
No.
866
868
870
4451AV
4457AV
4717AV
1125GB
Expansive
Belt Size
#10 - 24
1/4" - 20
3/8" - 16
Description
Screw Anchor Expander
Screw Anchor Expander
Screw Anchor Expander
Anchor Screw for 866
Anchor Screw for 868
Anchor Screw for 870
Roll Pin 1/4" x 1-1/8"
Sleeve
Depth
Std.
Box
9320
9330
9340
9350
9360
1/4"
5/16"
3/8"
1/2"
5/8"
3/8"
5/8"
58"
3/4"
1"
7/8"
1-5/16"
1-5/16"
1-3/4"
2"
5/8"
5/16"
15/16"
1-1/4"
1-1/2"
100
50
50
50
25
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
9420
9440
1/4"
3/8"
3/8"
5/8"
Overall
Length
Thread
Depth
Std.
Box
7/8"
5/8"
1-5/16" 15/16"
100
100
Part No.:
9322
9342
9352
9362
Anchor Size:
1/4"
5/16" & 3/8"
1/2"
5/8"
for Hollow Base Materials
Size
Min. Depth
6-8 x 3/4"
6-8 x 1"
6-8 x 1-1/2"
10-14 x 1"
10-14 x 1-1/2"
16-18 x 1-1/2"
3/4"
1"
1-1/2"
1"
1-1/2"
1-1/2"
Philadelphia, PA
610-647-8070
Overall
Length
Suitable Base Materials:
Concrete, Block and Brick
Scru-Lead Wall
Anchor
9409
9414
9419
9429
9439
9460
Drill
Dia.
Setting Tool (Solid Base Materials)
For use with sheet metal or wood screws in concrete, block, or
brick. This product relies upon the integrity of the base material. Recommended for light duty applications where holding
power is not a critical factor and should not be used overhead.
PartNo.
Rod/Anchor
Dia.
Hollow-Set Dropin with Stainless Steel Cone
Scru-Lead™ Wall Anchor
Anchor Materials:
Lead Alloy
Part
No.
Drill Dia
Std. Box
1/4"
1/4"
1/4"
5/16"
5/16"
3/8"
100
100
100
100
100
25
Washington D.C.
877-419-2755
Part No.
Size
9323
9333
9343
9353
9363
1/4"
5/16"
3/8"
1/2"
5/8"
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
9211
Suitable Base Materials:
105
Rentals
Part No.:
Designed for anchoring hollow base materials such as
hollow concrete block, brick with weep holes and hollow
core pre-cast concrete plank. It may also be used in solid
materials. May be installed flush or below base material
surface. Qualified for seismic and wind loads.
Pipe
Hangers
Min. Hole
Depth
Tools
Size
Abrasives
Part
No.
Threaded
Rod
Hollow-Set™
Internally Threaded Expansion Anchors
OnSite
Supply
Calk-In™ Machine Screw
Anchor
Strut
Concrete, Hollow Concrete and Brick Masonry
Fasteners
toggle bolts
Toggle Bolt Hollow Wall Anchors
Anchors
A spring wing type hollow wall anchor designed for use in
block, wallboard and other hollow base materials. Two-part
assembly consisting of a machine screw and a spring wing
toggle.
Strut
Anchor Materials:
Carbon Steel
Size Range:
1/8" x 2" to 1/2" x 6"
Suitable Base Materials:
Hollow Block, Wallboard, Plaster
Toggle
Bolts
Slotted Hex Head
Part No.
4038
Size
Drill Dia.
Std. Box
3/8"
50
Drill Dia.
Std. Box
1/2"
1/2"
5/8"
50
50
50
Drill Dia.
Std. Box
3/8"
1/2"
5/8"
7/8"
7/8"
1-1/4"
100
100
100
50
50
25
1/8" x 3"
Toggle
Bolts
Threaded
Rod
Flat Head
Combo
Round Head
Pipe
Hangers
Tools
Abrasives
Part No.
4021
4031
4041
4131
4141
4151
4161
4231
4241
4251
4261
4431
4441
4451
4461
4541
Size
1/8" x 2"
1/8" x 3"
1/8" x 4"
3/16" x 3"
3/16" x 4"
3/16" x 5"
3/16" x 6"
1/4" x 3"
1/4" x 4"
1/4" x 5"
1/4" x 6"
3/8" x 3"
3/8" x 4"
3/8" x 5"
3/8" x 6"
1/2" x 4"
Std. Box
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
7/8"
7/8"
7/8"
7/8"
1-1/4"
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
Drill Dia.
Std. Box
3/8"
3/8"
3/8"
1/2"
1/2"
5/8"
5/8"
50
50
50
50
50
50
50
Part No.
4132
4142
4232
Size
3/16" x 3"
3/16" x 4"
1/4" x 3"
Toggle
Wings
Only
Part No.
4000
4020
4220
4330
4430
4540
Size
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
Combo
Mushroom Head
OnSite
Supply
Safety
Drill Dia.
Part No.
4023
4033
4043
4133
4143
4233
4243
Rentals
106
Size
1/8" x 2"
1/8" x 3"
1/8" x 4"
3/16" x 3"
3/16" x 4"
1/4" x 3"
1/4" x 4"
Hartford, CT
800-969-0285
Tie-Wire
Acoustical Toggle
Part No.
4247
4257
Boston , MA
800-645-6155
Size
1/4" x 4"
1/4" x 5"
Washington D.C.
877-419-2755
Drill Dia.
Std. Box
5/8"
5/8"
100
100
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Wall Dog Light™ Duty anchors
Threaded
Rod
One-piece screw anchor with high-profile threads for easy
fastening into wallboard and other masonry base materials. The deep-cutting, corkscrew threads provide for smooth
entry and a powerful hold.
Anchor Materials:
Case Hardened Steel
NEW
Size Range:
HEAD
3/16" dia. x 2-1/2" length
STYLES
Suitable Base Materials:
Wallboard, Plywood, Concrete, Hollow or Grout-filled
Block, Brick, Plaster, Wood or Masonry
Strut
Wall-Dog™ Universal Light-Duty Anchor
Phillips Pan Head Wall-Dog™ Light Duty Anchor
2316
2330
2286
2294
2273
2274
2275
2276
Std. Box
1-1/4" Zinc Pan Head
1-1/4" White Pan Head
1-1/4" Black Pan Head
1-1/4" Brass Pan Head
1-1/2" White Pan Head
1-1/2" Bronze Pan Head
1-1/2" Zinc Pan Head
1-1/2" Black Phosphate Pan Head
100
100
100
100
100
100
100
100
Pipe
Hangers
Description
Combo Hex Washer Head Wall-Dog™ Light Duty Anchor
Part No.
2265
Description
Std. Box
1-1/4" Combo HWH Chrome
100
Tools
Part No.
Part No.
2277
2278
2279
2280
1/4"
1/4"
1/4"
1/4"
x
x
x
x
1-1/2" White Wafer Head
2" White Wafer Head
2-1/4" White Wafer Head
2-1/2" White Wafer Head
Std. Box
100
100
100
100
Robertson Head Wall-Dog™ Light Duty Anchor
Part No.
2266
Description
Std. Box
1-1/4" Chrome Robertson Head
100
OnSite
Supply
Description
Abrasives
Phillips Wafer Head Wall-Dog™ Light Duty Anchor
Phillips Oval Head Wall-Dog™ Light Duty Anchor
2316
2330
Description
Wall-Dog Kit with (1) Phillips Screwdriver
Wall-Dog Kit with 3/16" straight shank bit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
2314
2328
2388
2292
Boston , MA
800-645-6155
Description
Std. Box
1-1/4" Zinc Oval Head
1-1/4" White Oval Head
1-1/4" Black Oval Head
1-1/4" Brass Oval Head
Hartford, CT
800-969-0285
100
100
100
100
107
Safety
Part No.
Part No.
Rentals
Wall-Dog™ Kit (includes 50 Chrome Pan Head Anchors)
Fasteners
hollow wall anchors
Anchors
Zip-It™ Wallboard Anchor
Strut
Threaded
Rod
A one-piece self-drilling anchor designed for use in hollow
gypsum wallboard for light duty loads. Available in both
engineered nylon and Zamac alloy for use with either a #6 or
#8 screws in 3/8" to 1" wallboard. The Zip-It™ Jr. is formed
from engineered nylon for use with #6 screws in 3/8" to 5/8"
wallboard.
Anchor Materials:
Engineered Nylon or Zamac alloy
Size Range:
Use with #6 or #8 screw
Zinc Zip-Toggle® Hollow Wall Anchor
A hollow gypsum wallboard anchor designed designed to provide superior performance without the need to pre-drill larger
diameter hole. Packaged with it's own #6 x 2" lubricated
screw for 3/8" to 5/8" wallboard..
Anchor Materials:
Size Range:
Zamac Alloy
Use with #6 x 2" screw
Suitable Base Materials: Wallboard
Part No.
Suitable Base Materials:
Wallboard
2295
Description
Std. Box
Metal Zip-Toggle with screws
50
Nylon Zip-it™ Wallboard Anchor
Pipe
Hangers
Part No.
Description
Std. Box
Standard Box, no screws
Standard Box, #8 x 1" screws
2345
2348
100
100
Zinc Zip-It™ Wallboard Anchor
Part No.
Description
Tools
2346
2349
Std. Box
Standard Box, no screws
Standard Box, #8 x 1" screws
100
100
Zip-All™ Wallboard Anchor
Zip-It™ Kits
Part No.
Abrasives
2368
2369
A one-piece self-drilling anchor designed for use in hollow
gypsum wallboard or wood for light duty loads. For use with
either a #6 or #8 screws in 3/8" to 1" wallboard.
Anchor Materials:
Size Range:
Zamac alloy
Use with #6 or #8 screw
Suitable Base Materials: Wallboard, Wood
Description
Nylon Zip-It Kit, includes 50 anchors,
#8 x 1" screws & #2 Phillips Driver Bit
Zinc Zip-It™ Kit, includes 50 anchors,
#8 x 1" screws & #2 Phillips Driver Bit
™
Nylon Zip-it™ Jr. Wallboard Anchor
Part No.
Description
2345
Standard Box, #6 x 1" screws
Part No.
Std. Box
100
2296
2349
Description
Std. Box
Zinc, no screws
Zinc, with screws
100
100
OnSite
Supply
E-Z Ancor™ Self-Drilling Drywall Anchors
The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in
gypsum wallboard. Available in zinc or high strength engineered plastic (non-conductive). Ideal
anchor for 3/8", 1/2" and 5/8" gypsum wallboard.
Safety
Part No.
EZ25 Starter
Kit contains 25
Zinc anchors
and 25 Screws
Rentals
108
Hartford, CT
800-969-0285
EZ100
EZPPL100
EZ25
Boston , MA
800-645-6155
Description
Zinc E-Z Anchor
Plastic E-Z Anchor
E-Z Anchor Starter Kit
Washington D.C.
877-419-2755
Std. Box
100
100
100
Philadelphia, PA
610-647-8070
Fasteners
Anchors
hollow wall anchors
Sharkie Plastic Wall Anchor
#6-#8
#8-#10
#10-#12
#14-#16
#6 x 1"
#8-1"
#10 x 1-1-1/2"
#14 x 2"
100
100
100
Bantam Plug™ Plastic Wall Anchor
LEGS Wallboard Anchor
A fast, easy-to-use expansion anchor designed for use in wallboard. Features a pierce point, requiring no-drilling. Removal
of anchor, if required, is easy. Once removed, the anchor
leaves a small slit in the wallboard.
Anchor Materials:
Size Range:
Carbon Steel
Use with #6 or #8 screw
Suitable Base Materials: Wallboard
Part No.
Description
Std. Box
2336 LEGS® Wallboard Anchor
100
2349 LEGS® Wallboard Anchor, w/ #8 x 1" screw 100
Designed for use with lightweight fixtures with a sheet metal
or wood screw. Not for overhead use.
Anchor Materials:
Plastic
Size Range:
#6-#8 x 3/4" to #14-#16 x 1-1/2"
Part
No.
7559
7569
7579
7589
Size
6-8 x 3/4"
8-10 x 7/8"
10-12 x 1"
14-16 x 1-1/2"
Drill
Dia.
Min.
Depth
Std
Box
3/16"
3/16"
1/4"
5/16"
3/4"
7/8"
1"
1-1/2"
100
100
100
100
TA
TB
TC
TD
Boston , MA
800-645-6155
OnSite
Supply
Ideal for static applications requirinq a light to medium load performance. Installation
is quick, requiring only a 5/16" hole. Not recommended for use overhead or applications where holding values are critical.
Anchor Materials:
Size Range:
Plastic
Grip Range from 1/8" to 1-1/2".
Suitable Base Materials:
Part
Gypsum Wallboard, Plaster, Plywood & some Hollow Masonry No. Description
Washington D.C.
877-419-2755
Strut
Suitable Base Materials:
Concrete, Block, Brick, Wallboard
Toggler® Hollow Wall Anchor
Philadelphia, PA
610-647-8070
Threaded
Rod
6K PAK
8K PAK
10K PAK
14K PAK
Screw Size
Pipe
Hangers
Sharkie Anchor Flange #4-#10
Sharkie Anchor Flange #6-#12
Sharkie Anchor Flange #8-#14
Anchor Size
Tools
7580
7582
7584
Std. Box
Part No.
Abrasives
Description
Part No.
Designed for use with lightweight fixtures with a sheet metal
or wood screw. Not for overhead use. Kits include 100-pc.
Combination Phillips/Slot Pan head sheet metal screws and
100-pc conical anchors.
Grip
Range
Std
Box
Small Toggler
1/8" to 1/4"
Medium Toggler 3/8" to 1/2"
Large Toggler
5/8" to 3/4"
X-Large
1-1/2"
Hartford, CT
800-969-0285
100
100
100
100
109
Safety
Suitable Base Materials:
Concrete, Block, Brick, Wallboard
Plastic Conical Anchor Kits
Rentals
One piece plastic wall anchor designed for light duty applications in wallboard, concrete and masonry. Works in hollow or
solid based materials and is suitable for screws with various
thread sizes and styles.
Anchor Materials:
Plastic
Size Range:
#4 x 1" to #14 x 1-9/16" screw
Fasteners
hollow wall anchors
Anchors
Polly™ Hollow Wall Anchor
Strut
A sleeve type hollow wall anchor designed for use in base
materials such as plaster, wallboard, concrete block, hollow
tile or plywood.
Anchor Materials:
Carbon Steel
Size Range:
1/8" Extra Short to 1/4" Long
Threaded
Rod
Suitable Base Materials:
Plaster, Wallboard, Concrete Block, Hollow Tile, Plywood
Combination Slotted Phillips Head Polly™
Part
No.
Pipe
Hangers
2100
2101
2102
2111
2112
2113
2121
2122
Size
Screw Drill
Length Dia.
1/8" X Short 1-1/16"
1/8" Short
1-3/4"
1/8" Long"
2-1/4"
3/16" Short
2"
3/16" Long
2-1/2"
3"
3/16" X Long
1/4" Small
2-1/4"
1/4" Long
2-3/4"
Wall
Thk
5/16"
1/8"-1/4"
5/16"
3/8"-1/2"
5/16"
5/8"-1"
3/8"
3/8"-5/8"
3/8" 3/4"-1-1/8"
3/8" 1-1/4"-1-3/4"
7/16"
3/8-1/2"
7/16" 5/8"-1-1/4"
Std
Box
100
100
100
50
50
25
50
50
Strap-Toggle™ Hollow Wall Anchor
A pre-assembled anchor consisting of a carbon steel wing and
a locking cap/ratchet leg assembly molded from engineered
plastic. When compared to traditional toggles, this anchor
can be installed through a smaller hole and does not require
a fixture or screw to set it.
Anchor Materials:
Carbon Steel/Engineered Plastic
Size Range:
3/16" x 4" to 1/2" x 4"
Suitable Base Materials:
Hollow Wallboard or Hollow Brick
Part
No.
4052
4054
4056
4058
Size
Drill
Dia.
Wall
Thickness
Std
Box
3/16" x 4"
1/4" x 4"
3/8" x 4"
1/2" x 4"
1/2"
1/2"
3/4"
3/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
50
50
25
25
Tools
Slotted Hex Head Polly™
Abrasives
Part
No.
Size
2105 1/8" Short
Screw Drill
Length Dia.
1-3/4" 5/16"
Wall
Thk
Std
Box
3/8"-1/2" 100
OnSite
Supply
Polly™ Setting Tool
Drive Polly™
Part
No.
Size
Safety
2182 1/8" Short
2184 1/8" Long"
Screw Drill
Length Dia.
1-3/4" 5/16"
2-1/4" 5/16"
Wall
Thk
Std
Box
3/8"-1/2" 100
5/8"-1" 100
For faster setting, use the Polly setting tool. Back screw head
out 2-3 turns, slide the tool behind the screw head, then
squeeze the tool to expand the Polly. This tool fits all sizes.
Part No.
2150
Description
Polly Setting Tool
Polly™ Setting Tool (Fits All Sizes)
Part
No.
Size
2840 1/8" Short
Rentals
110
Screw Drill
Length Dia.
1-3/4" 5/16"
Wall
Thk
Std
Box
3/8"-1/2" 100
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
NO LICENSE
REQUIRED
10 times faster
than anchoring
5 times faster than
powder
no special training
QUIET
work in tenant
occupied buildings
T3SS
VERSATILE
fastens into:
• Concrete
• Hollow Block
• Pan Deck
• Steel
without changing
power or color
loads
Trak-It® C3 Stick-E
Single Pin Tool
Fasteners
Pipe
Hangers
FAST
Anchors
For ELECTRICAL/MECHANICAL Contractors
Strut
Two LABOR SAVING Choices
Threaded
Rod
AUtomatic GAS fastening systems
Abrasives
Tools
Magazine Style Short Track Tool
Part No.
T3SS
B0092
B0022
T3FUEL
Part No.
Description
Tool, 2 batteries, charger, carrying case
Rechargeable Battery
Battery Charger
Fuel Cell, 2-pack
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
55002
55583
55618
55010
Boston , MA
800-645-6155
Description
Tool, 2 batteries, charger, carrying case
Rechargeable Battery
Charger
Fuel Cell
Hartford, CT
800-969-0285
111
Safety
• Includes 2 batteries, charger & carrying case
• Sets the standard for single-shot applications
• Replaces the need for tools like the DX35
• Reduced operator fatigue
• Reduced installation costs -- up to 75%
Rentals
Advantages
• Magazine "short" track
• Special STICK-E accessories for most Electrical/
Mechanical applications
• Reduced installation costs
• Reduced operator fatigue
• Fasten directly thru the fixture with pins and
STICK-E accessories
• STICK-E accessories are compatible with Trak-It
C3 tools
OnSite
Supply
Advantages
Fasteners
T3SS / T3MAG Mechanical & Electrical Gas Fastening
Anchors
Strut
Hilti® Equivalents:
T3MAG: Compare to
Hilti® GX120
Threaded
Rod
T3SS Single Shot Gas Tool
T3MAG Gas Tool
Designed for Electrical and Mechanical Trades
Pipe
Hangers
Tools
• Fasten to Concrete, Hollow Block, Pan Deck or Steel
without changing power or color loads!
• NO OVERDRIVE - The T3SS senses how much power is
required and delivers the exact amount. Fasten to hollow
block without blasting through!
• Never have to figure which color load to use! Just click in
the 1000 shot fuel cell into place and you are ready to go!
• 3000 shot rechargeable battery with easy OFF switch that
locks into place to extend battery life.
• Almost no recoil and so quiet it can be used in occupied
buildings – Perfect for Hospitals and Schools!
• Includes 2 batteries, charger, carrying case and
safety glasses. Please note: Fuel Cell must be ordered separately.
Part No.
Abrasives
T3SS
M150200
T3FUEL
B0092
B0022
Description
Tool, 2 batteries, charger, carrying case
Magnetic Work Contact Element
T3 fuel Cell, 2-pack
Battery, 6 Volt NiCd
Battery Charger
25% More Powerful for Fastening Into Hard
Concrete and Steel
• Handles the hardest concrete and the toughest steel even red iron!
• Larger diameter pin (.125) for higher stick rate
• Deep leg track capability. Reaches into 1-5/8" x 2" deep
track.
• Easy push down force.
• One step fuel injected system.
• 15 pin strip, 45-pin magazine.
• Improved battery system.
• Newly designed fitted dust system!
• Includes 2 batteries, charger, carrying case and
safety glasses. Please note: Fuel Cell must be ordered separately.
Part No.
T3MAG
M150200
T3FUEL
B0092
B0022
Description
Tool, 2 batteries, charger, carrying case
Magnetic Work Contact Element
T3 fuel Cell, 2-pack
Battery, 6 Volt NiCd
Battery Charger
T3MAG Fuel/Pin Packs
OnSite
Supply
Safety
Pole Tool
• Comfortable "motorcycle" grip
• Sturdy design, simple to assemble
Part No.
Rentals
EP0L6
EP0L8
112
Description
6' Extension Pole Tool
8' Extension Pole Tool
Hartford, CT
800-969-0285
• Each Fuel Cell contains 1000
shots.
• Change fuel cells in seconds
with the Fuel Eject Button. No
valves to press. No fuel doors
to close
• Bigger pin (.125 dia) means
better success rate
• New 15 pin strip means less loading and more shooting
• New patented Point Collation virtually eliminates jams
Part No.
T3012
T304B
T3100
Boston , MA
800-645-6155
Description
Qty
1/2" Steel Pin with (1) Fuel Cell
3/4' Concrete Pin with (1) Fuel Cell
1" Concrete Pin with (1) Fuel Cell
Washington D.C.
877-419-2755
1000
1000
1000
Philadelphia, PA
610-647-8070
Anchors
Accessories for Electrical Contractors
Straight Shank Pin
Used for fastening
sheet metal to steel,
attaching to block,
pan deck, insulated
fireproofing and most
grades of concrete.
500 per box, Master
Carton Qty. 5 boxes.
Part No.
M034
M100
Threaded Rod Hanger
Tie Strap Holder
3/4" Plated Pin, 100/box, 500/case
3/4" Plated Pin, 50/box, 1,250/case
Part No.
Description
TSHMP034
Tie Strap Holder
Part No.
Description
14TRHMP034 1/4" Rod Hanger
12HSMP034 3/8" Rod Hanger
Strut
Accessories for Mechanical
Contractors
Fasteners
ramset t3 tool accessories
Description
Premium Step Shank Pin
Part No.
M012
M034BB
One Hole Straps
Conduit Clamp
Description
1/2" Pin w/Washer
1" Pin w/Washer
3/4" Plated Pin, 50/box, 250/case
3/4" Plated Pin, 100/box, 500/case
Part No.
Part No.
Description
12CCMP034L 1/2" Conduit Clamp
34CCMP034L 3/4" Conduit Clamp
38HSMP034
12HSMP034
34HSMP034
10HSMP034
114HSMP034
Description
3/8" Hole Strap
1/2" Hole Strap
3/4" Hole Strap
1" Hole Strap
1-1/4" Hole Strap
Pipe
Hangers
Premium pin with ballistic profile for hard
concrete applications.
500 per box, Master
Carton Qty. 5 boxes.
Threaded
Rod
3/4" Pin w/Washer
1" Pin w/Washer
Part No.
M100BB
Ceiling Clip
Description
1" Premium Pin
w/Washer & Plastic Flute
3/4" Plated Pin, 50/box, 250/case
Part No.
Description
34CCMP034L 3/4" Ceiling Clip
3/4" Plated Pin, 100/box, 5000/case
Part No.
Description
MP034TH
Top Hat Pin
OnSite
Supply
Low Voltage Accessories
Top Hat Pin
Abrasives
Used when maximum
holding strength is
required. 500 per
box, Master Carton
Qty. 5 bxs.
Tools
PowerPoint® Step Shank Pin
Bridle Ring
BR2
Description
2" Bridle Ring
BR200* 2" Bridle Ring w/ Attached
washer (NOT pre-assembled)
2" Bridle Saddle, 50/box, 250/case
Part No.
BR2S
Description
2" Bridle Saddle
Threaded Stud
1/4"-20, 1/2" Thread, 3/4" Shank,
100/box, 1000/case
Part No.
Description
14STUD
Threaded Stud
Safety
Part No.
Bridle Saddle
*For use when fastening with powder actuated tools, tapcons or
conventional drill and anchor methods.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
113
Rentals
2" Bridle Ring, 1" Plated Pin, 50/box,
250/case
Fasteners
powers® stick-e® Gas fastening system
Accessories
Anchors
Strut
STICK-E Step Shank Pin
Shank dia. 0.102/0.088. EACH BOX OF PINS INCLUDES
ONE FUEL CELL. 1000 per box, Std. Ctn. Qty. 5000.
Part No.
55080
55081
Description
3/4" Step Shank Pin (knurled)
1" Step Shank Pin
Threaded
Rod
Trak-It® C3-ST (Short Tool)
Pipe
Hangers
• Magazine "short" track, holds up to 20 pins
• Special STICK-E accessories for most Electrical/Mechanical
applications
• Reduced installation costs
• Reduced operator fatigue, weighs only 7 lbs.
• Designed specifically to use the STICK-E System of accessories
• Includes 2 batteries, charger and carrying case.
Please note: Fuel Cell must be ordered separately.
Part No.
Tools
55002
55583
55618
Standard Pins With Break-Free Collation
Smooth Shank with rolled point. Shank dia. of 0.102.
Designed for use in concrete and masonry. Plastic collation
breaks completely free of pin during installation. EACH
BOX OF PINS INCLUDES ONE FUEL CELL. 1000 per
box, Std. Ctn. Qty. 5000.
Description
Tool, 2 batteries, charger, carrying case
Rechargeable Battery
Charger
Part No.
Abrasives
55032
55033
55034
55035
Description
3/4" Black
1" Zinc
1-1/4" Zinc
1-1/2" Zinc
Trak-It® Pole Tools
Pole tools come complete with Trak-It C3-ST tool (Short Track
Tool).1 per box, Standard Carton Qty. 1.
Part No.
OnSite
Supply
55049
55051
Description
6' Pole Tool and one Track-It C3-ST Tool
8' Pole Tool and one Track-It C3-ST Tool
Perma-Seal Coated Standard Pins
Safety
Trak-It® Fuel Cells
Works in temperatures down to 10°F. 20 per box.
Part No.
55010
Rentals
114
Description
Track-It Fuel Cell
Hartford, CT
800-969-0285
Designed for use in areas where a greater level of corrosion resistance is required. Shank dia. of 0.102. EACH
BOX OF PINS INCLUDES ONE FUEL CELL. 1000 per
box, Std. Ctn. Qty. 5000.
Part No.
55038
55039
Boston , MA
800-645-6155
Description
3/4" Perma -Seal
1" Perma-Seal
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
STICK-E Accessories for Electrical and Mechanical Contractors
Fasteners
powers® stick-e® Gas fastening system
Bridle Ring
Cable Tie Donut
For suspending acoustical ceiling systems or
light fixtures. Recommended Pin Size(s):
P/N 55080 3/4" and
P/N 55081 1" Step
Shank Pins. 100/box.
For suspending single
or multiple wires and
cable in runs from ceilings of all base materials. Recommended
Pin Size(s): P/N 55080 3/4" and P/N
55081 1" Step Shank Pins. 100/box.
Part No.
Part No.
For attaching cable
ties (up to 1/4" wide)
to all types of walls
and ceilings. Ideal
for strapping wires
and cable for hanging
temporary lighting
fixtures from all base materials. Recommended Pin Size: P/N 55080 3/4"
Step Shank Pins. 100/box,
Description
Lathing Washer
Part No.
Part No.
55059
55061
Description
1/2" Conduit Clip
3/4" Conduit Clip
Rebar Basket Clip
BX Clip
For attaching #3 and
#4 rebar to existing
concrete or wood
forms prior to a pour.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
For attaching BX Cable
to walls and ceilings
of any base material.
Recommended Pin Size:
P/N 55080 3/4" Step
Shank Pins. 100/box,
Part No.
Description
Part No.
55054
Description
3/8" BX Clip
Rebar Basket Clip
Description
Insulation Washer
Stainless Steel Sealing
Washer
For attaching waterproofing membrane to
foundations and roofing
applications. Recommended Pin Size(s):
P/N 55038 3/4" and P/N 55039 1"
Permaseal Pins. 100/box,
Part No.
55043
Washington D.C.
877-419-2755
Description
SS Sealing Washer
Boston , MA
800-645-6155
For attaching conduit
and steel piping to
steel beams, wood
and concrete ceilings.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
Part No.
55064
55066
55068
Hartford, CT
800-969-0285
Safety
For attaching exterior
foam insulation to all
base materials. Recommended Pin Size(s):
P/N 55080 3/4" and
P/N 55081 1" Step
Shank Pins, P/N 55033
1-1/4" and P/N 55034 1-1/2" BreakFree Rolled Point Pins. 100/box.
OnSite
Supply
Mini Conduit Clip
Insulation Washer
Philadelphia, PA
610-647-8070
Description
1/4" Rod Hanger
3/8" Rod Hanger
Pipe
Hangers
For attaching conduit
and light duty pipe
to walls and ceilings
of any base material.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
55070
55042
Conduit Clip (1 Hole Strap)
For attaching rod overhead to steel beams,
wood or concrete while
suspending utilities,
cable trays, conduit
and pipe. Recommended Pin Size(s): P/N
55080 3/4" and P/N
55081 1" Step Shank Pins. 100/box.
55050
55052
For attaching wire lathe
to all base materials.
Recommended Pin
Size(s): P/N 55080
3/4" Step Shank Pins,
P/N 55033 1" and P/N
55034 1-1/4" BreakFree Rolled Point Pins. 100 per box,
Part No.
Cable Tie Donut
Tools
1/2" Strap Washer
Lathing Washer
55040
Description
Abrasives
Description
Part No.
Part No.
Rod Hanger
For attaching duct
straps to suspended
HVAC ductwork onto
ceilings. Recommended Pin Size:
P/N 55080 3/4"
Step Shank Pins.
100/box,
55062
Description
1-1/4" Bridle Ring
1-1/2" Bridle Ring
2" Bridle Ring
55076
Strap Washer
Part No.
55094
55095
55096
Threaded
Rod
Description
Right Angle Clip
Description
1/2" Mini Conduit Clamp
3/4" Mini Conduit Clamp
1" Mini Conduit Clamp
115
Rentals
55092
Strut
Right Angle Clip
Anchors
Stick-E accessories snap directly in the nose of the Trak-It Tool and are held in place while shooting.
Fasteners
gas production tools
C3 Trak-It Gas Tool and Accessories
Anchors
Bullseye Pins - C3
Strut
Step Shank with Rolled Point
Shank dia. 0.102 Each box of pins has
one fuel cell. 1000 per box, Standard
Carton Qty. 5000.
Part No.
Threaded
Rod
55085
55087
55080
Trak-It® C4
Description
• Provides enough power to drive
3/4" to 2-9/16" pins with shank
diameters up to .145"
• Fastens wood (2x4s) to concrete or
steel track to concrete.
• One fuel cell shoots 800 to 1200
fasteners.
• Tool comes with case, charger and
two batteries
680 Step Shank Pin
730 Step Shank Pin
780 Step Shank Pin
Trak-It® C3
Pipe
Hangers
• Designed for use on concrete,
lightweight concrete, hollow and
grouted CMU, masonry and steel.
• Installs 1/2" steel pin with step
shank and standard pins with
smooth shank rolled point 3/4" 1-1/2".
• Tool comes with case, charger and
two batteries
Tools
Part No.
Description
55011
55055
55618
55583
55053
55055
C3 Trak-It
C3 Fuel Cell
Battery Charger
Rechargeable Battery
6' Pole Tool (only)
8' Pole Tool (only)
1/2" Steel Pin - C3
Step Shank with Rolled Point
Designed for use in A36 and A572 steel
beams, purlins and bar joist.
Each box of pins has one fuel cell. 1000
per box, Standard Carton Qty. 5000.
Part No.
Shank Dia.
55020
0.120/0.102
Part No.
Description
55112
55618
55583
C4 Trak-It
Battery Charger
Rechargeable Battery
Abrasives
Trak-It Fuel Cells, Pole Tools and
accessories can be found on page 114
Standard Pins With BreakFree Collation - C3
Trak-It® C4EX
Smooth Shank with Rolled Point
OnSite
Supply
Standard Pin - C3
Safety
Designed for use in concrete and
masonry. Shank Dia. 0.102" Each box
of pins has one fuel cell. 1000 per box,
Standard Carton Qty. 5000.
Smooth Shank with rolled point.
Shank dia. of 0.102. Designed for use
in concrete and masonry. Plastic collation breaks completely free of pin during installation. Each box of pins has
one fuel cell. 1000 per box, Standard
Carton Qty. 5000.
Part No.
Part No.
Description
55032
55033
55034
55035
3/4" Black
1" Zinc
1-1/4" Zinc
1-1/2" Zinc
Smooth Shank with Rolled Point
55022B
55024
55026
55028
Rentals
116
Description
3/4" Black
1" Zinc
1-1/4" Zinc
1-1/2" Zinc
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
• Same features as the C4, but 20%
more power.
• Designed for use on concrete,
lightweight concrete, hollow and
grouted CMU, masonry and steel
• Designed for speed and efficiency.
• One fuel cell shoots 800 to 1200
fasteners.
• Tool comes with case, charger and
two batteries
Part No.
Description
55127
55618
55583
C4EX Trak-It
Battery Charger
Rechargeable Battery
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Trak-It® C4 CZ
TF1100 TrakFast
Specifications
TF1100
TrakFast Standard
Fuel/Pin Pack
3/4" Pin
3/4" Pin
0.102
0.145
55113
55132
55167
1" Pin
1" Pin
1" Step Shank Pin, Knurled
0.102
0.145
0.145
55167
555136
55169
55141
1-1/4"
1-1/2"
1-1/4"
1-7/8"
55171
55124
55138
55128
55140
5145
55147
2" Step Shank Pin
2-1/4" Pin
2-3/8" Step Shank Pin
2-1/2" Pin
2-1/2" Step Shank Pin
2-9/16" Pin
2-9/16" Pin w/ Stik-E washer
0.145
0.102
0.145
0.145
0.145
0.137
0.137
55161
55163
55165
.500 Pin, Knurled
.680 Pin, Knurled
.730 Pin, Knurled
0.120
0.102
0.120
55149
1" Square Stick-E washer
0.137
55116
55118
55139
55172
55173
55174
.102
.102
.145
.145
.145
.145
Philadelphia, PA
610-647-8070
x
x
x
x
x
x
1-1/4" C4 Pin
1-1/2" C4 Pin
2-1/4" Step Shank Pin
1"Wood/Steel, Knurled
1-1/4" Wood/Steel, Knurled
2" Wood/Steel, Knurled
Washington D.C.
877-419-2755
0.145
0.145
0.145
0.145
0.102
0.102
0.145
0.145
0.145
0.145
1000
1000
1000
TrakFast Breakaway
Fuel/Pin Pack
Tools
55111
55130
FPP012S 1/2" Plated Steel Pin
FPP034B 3/4" Black Pin
FPP100B 1" Black Pin
For high volume, repetitive
fastenings to concrete such as
wood furring to concrete
Part
No.
Description
FPP034T
FPP100T
FPP114T
FPP112T
Std.
Carton Qty.
3/4" Plated Pin
1" Plated Pin
1-1/4" Plated Pin
1-1/2" Plated Pin
1000
1000
1000
1000
TrakFast Accessories
Battery
OnSite
Supply
• Each box comes with 800 pins and 1 fuel cell.
• Part no. 55147 (Sill Plate Pin) comes with Stick-E
washers
Part
Shank
Description
No.
Dia.
For high volume, repetitive
fastenings to concrete and steel such as drywall track to
concrete.
Part
Std.
Description
No.
Carton Qty.
Battery
Charger
Part
No.
LD100
7405151
7405160
7405162
TFUEL
B0022
7505012
Boston , MA
800-645-6155
Fuel Cell
Description
Std.
Carton Qty.
Plated Lathing Disc (1" dia.)
Disc Holding Probe
Delta Plug Holder/Cosella
Platen Plug Holder/Big O
Fuel Cell
Battery Charger
Battery
Hartford, CT
800-969-0285
1000
1
1
1
12
1
1
117
Safety
Trak-It® C4 Pins and Washers
Pin
Pin
Pin, Knurled
Pin
TF1100 Trak Fast
TrakFast Fuel/Pin Packs
Trak-It Fuel Cells, Pole Tools and
accessories can be found on page 114
Shank
Shank
Shank
Shank
Description
Threaded
Rod
C4 Trak-It
Battery Charger
Rechargeable Battery
Pipe
Hangers
Part No.
55133
55618
55583
Abrasives
Description
Strut
• Uses Fuel cell, 1000
shots
• Max. cycles/second: 2
• Weight: 8.375 lbs.; Length: 17"
• Battery (charged): 3000 shots
Part No.
Step
Step
Step
Step
Anchors
• Automatically resets
piston.
• 42 pin magazine capacity
• Narrow nose and profile
to reach inside deep leg
track (1-5/8"w x 2"h)
Rentals
• Single shot gas fastening tool for light duty
static load.
• Able to shoot .300 and
8mm headed powder
pins up to 3 inches in
length. Shank diameters include .157",
.137" and .145",
• One fuel cell shoots
800 to 1200 fasteners.
• Tool comes with case,
charger and two batteries
Fasteners
Gas production Tools
Fasteners
Powers® powder actuated tools
Anchors
Strut
P3500™ .27 Caliber, Low-Velocity
Semi-Automatic Strip Tool
Threaded
Rod
• Designed for high speed and repetitive volume applications
• Installs ballistic point drive pins, .300 head drive pins,
8mm head drive pins and 1/4"-20 threaded studs, up to
3" in total length
• Precision cast aluminum
PA3500™ .27 Caliber, Low-Velocity
Semi-Automatic Strip Tool with Power
Adjuster
• Power adjuster settings of 1, 3 and 6.
• Installs ballistic point drive pins, .300 head drive pins,
8mm head drive pins and 1/4"-20 threaded studs, up to
3" in total length
• Precision cast aluminum
Specifications
Specifications
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 5 lbs.; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 5 lbs.; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
Pipe
Hangers
Typical Applications
Tools
• Acoustical - Ceiling clip assemblies
• Drywall - Metal track, door frames
• Forming - Concrete forms, basket clips, forming pins
• Electrical - Boxes, conduit clip assemblies
• Mechanical - Duct straps
• Residential - Sill Plates
Part No.
P3500
Description
Typical Applications
• Acoustical - Ceiling clip assemblies
• Drywall - Metal track, door frames
• Forming - Concrete forms, basket clips, forming pins
• Electrical - Boxes, conduit clip assemblies
• Mechanical - Duct straps
• Residential - Sill Plates
Part No.
.27 Caliber Semi-Automatic Strip Tool
PA3500
Description
.27 Caliber Semi-Automatic Strip Tool
with power adjuster
Abrasives
P3600™ .27 Caliber, Low-Velocity Semi-Automatic Strip Tool
Specifications
OnSite
Supply
• .27 caliber, 10-strip loads: 5 (Red), 6 (Purple)
• Weight: 5 lbs; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
Typical Applications
Safety
• Precison cast aluminum body
• Installs 10mm head dripe pins, 3/8" threaded studs,
3/8" headed drive pins
• Use where more power is needed; attaching 2x4s to
hard aggregate or steel
• 2x4s to concrete or steel
• Hanging sprinkler pipe
• Heavy-duty applications for steel and concrete
• Tele-communications
• Concrete forms, basket clips, forming pins
• Sill Plates
Part No.
P3600
Rentals
118
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
.27 Caliber Semi-Automatic Strip Tool
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
ramset® powder Actuated Tools
• Padded recoil-absorbing handle
• Very Powerful, power adjust
• Fastens up to 3" standard Ramset drive pins and
threaded studs — ideal for general construction
applications
• Rubber grip on front barrel eliminates pinched
fingers & hands
• Full one-year warranty
• Soft, recoil-absorbing handle for increased user comfort
Specifications
• Twist lock front end, easy to clean
• 5 Year Warranty.
Specifications
• .27 caliber 10-shot strip loads 2 (Brown), 3 (Green), 4
(Yellow), 5 (Red)
• Weight: 5.45 lbs.; Length: 15"
• Muzzle Bushing O.D.: 5/8"
• Maximum Pin Length: 3" straight pin
• Automatic cartridge ejection system increases operator speed and productivity
• Only two moving parts to clean
• Low Recoil reduces operator fatigue on large jobs
• Narrow 5/8" muzzle bushing for easy access in tight
fastening areas
• Rubber cushion grip for maximum operator comfort
• Rugged metal housing holds up for years
• Rugged polyamide housing reduces heat transfer and
maximizes operator comfort
• Soft, recoil-absorbing handle for increased user comfort
• Ramset Disc Technology, loads only advance after firing. Eliminates 10-20% of load waste
• .25 caliber, 10-shot disc loads, 2 (Brown), 3 (Green),
4 (Yellow)
• Weight: 4.9 lbs.; Length: 12-1/2";
• Muzzle Bushing O.D.: 3/4"
• Maximum Pin Length: 2-3/8" (2-1/2"-w/washer)
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
119
Safety
• 22 caliber, single shot loads, 2 (Brown), 3 (Green), 4
(Yellow)
• Weight: 4.3 lbs.; Length: 13-1/2"
• Muzzle Bushing O.D.: 5/8"
• Maximum Pin Length: 1-1/2
Rentals
Specifications
Specifications
Washington D.C.
877-419-2755
• Quick power adjustment gives eight levels of power
with only one load level for a variety of applications
• 5 Year Warranty.
• 5 Year Warranty.
Philadelphia, PA
610-647-8070
D60 .25 Caliber Disc Tool
Power Adjustable. 2-3/8" Pin Capacity
(2-1/2" w/washer)
OnSite
Supply
721 .22 Caliber Single Shot Tool
1-1/2" Pin Capacity
Abrasives
Tools
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 4.5 lbs.; Length: 13-1/4"
• Muzzle Bushing O.D.: 9/16"
• Maximum Pin Length: 2-1/2" (3" w/washer)
Threaded
Rod
Strut
SA270 .27 Caliber
Semi-Automatic Strip Tool
3" Pin Capacity
Pipe
Hangers
Cobra .27 Caliber
Semi-Automatic Strip Tool
2-1/2" Pin Capacity (3" w/washer)
Fasteners
ramset® powder Loads
Powder Loads
Anchors
ITW Ramset powder loads and tools match tolerances to provide optimum power within recognized national velocity
standards. Available in color-coded 10-load discs, 10-load strips, and 100-load boxes. Power level is designated by the
load level number marked on each box; also by the color of the box and each powder load. As the number increases, the
power level increases.
Powder Loads for Ramset® Tools
Power
Caliber/
Part
No.
Level
Color
Type
Pkg
Strut
Threaded
Rod
Pipe
Hangers
D60/D60L
D45/D45A
& AutoFast
2D60
3D60
4D60
2
3
4
Brown
Green
Yellow
.25 Disc
.25 Disc
.25 Disc
10/Disc
10 Discs
per box
D45/D45A
& AutoFast
5D45
5
Red
.25 Disc
10 Disc/box
721, 4170
M70, RS22,
& HD22
22CW
32CW
42CW
2
3
4
Brown
Green
Yellow
.22 Single
.22 Single
.22 Single
100/box
2RS27
3RS27
4RS27
5RS27
2
3
4
5
Brown
Green
Yellow
Red
.27
.27
.27
.27
Strip
Strip
Strip
Strip
10/Strip
10Strips
per box
L1600
L674
L675
4
5
Green
Red
.22 Single
.22 Single
100/box
Powder Loads for HILTI® Tools*
Part
Power
Caliber/
No.
Level
Color
Type
SA270
Cobra
Viper
Rocket
Tool
Model
Pkg
Tools
Abrasives
DX-35
3RS25
4RS25
5RS25
3
4
5
Green
Yellow
Red
.25 Strip
.25 Strip
.25 Strip
10/Strip
10 Strips
per box
DX-350
DX-351
DX-36M
2RS27
3RS27
4RS27
2
3
4
Brown
Green
Yellow
.27 Strip
.27 Strip
.27 Strip
10/Strip
10Strips
per box
5RS27
5
Red
.27 Strip
DX-451
DX-460
6RS27
6
Purple
.27 Strip
10/Strip
10 Strips
per box
DXE37
DXE72
22CW
32CW
2
3
Brown
Green
.22 Single
.22 Single
100/box
Save with Bulk Packaging!
Tool
Model
DX-350
DX-351
DX-36M
DX-451
10/Strip
10 Strips
per box
*Hilti® is a registered trademark of Hilti Corp.
OnSite
Supply
Safety
• .25 and .27 caliber strips
available in 1000 pack
• 1000 pack/100 strips/box
Rentals
120
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Black Track Pins — Designed for concrete & structural steel applications
Shank
Len. 721
1503KB 1/2"
1506B
3/4"
1508B
1"
•
•
•
Auto
Fast
D60
•
•
•
•
•
•
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
•
•
•
.300 Head Diameter Drive Pins — Designed for concrete & structural steel applications
Part
No.
1503K
1506
1508
1510
1512
1514
1516
1524
Shank
Len. 721
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
•
•
•
•
•
Auto
Fast
D60
•
•
•
•
•
•
•
•
•
•
•
•
•
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Shank Dia:.145", Packaged: 100/box.
*1000 Pack available.
Strut
Part
No.
Threaded
Rod
Anchors
The special black coating improves pin penetration into difficult base material (i.e. hard concrete). Available in 100-pack
and 1000-pack per box. Shank Dia.: .145", Head Dia.: .300". 1503K: Knurled Shank cinches connections tight
Fasteners
Ramset® powder actuated fasteners
.300 Head Diameter Drive Pins with 7/8" Washer
Washer increases bearing surface against material to be fastened
Shank
Len. 721
1506SD 3/4"
1508SD
1"
1510SD 1-1/4"
1512SD 1-1/2"
1514SD
2"
1516SDC 2-1/2"
1524SDP* 3"
•
•
•
•
•
•
•
Auto
Fast
D60
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Pipe
Hangers
Part
No.
*1524SDP: Square washer indicates
3" pin installed. Shank Dia:.145",
Packaged: 100/box.
Tools
.300 Head Diameter PowerPoint and PowerPoint Step Shank Pins
For fastening into harder steel & concrete
PowerPoint pins provide easier penetration into hard steel and concrete. Designed to reduce pin failures and increase
holding values.
Part
No.
SP12
SP58
SP34
SP78
Shank
Len. 721
1/2"
5/8"
3/4"
7/8"
•
•
•
•
Auto
Fast
D60
•
•
•
•
•
•
•
•
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Abrasives
PowerPoint Shank Diameter: .150"
SP100
SP114
SP112
SP178
1"
1-1/4"
1-1/2"
1-7/8"
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PowerPoint Step Shank Dia.: .150"/.180".
Packaged: 100/box.
OnSite
Supply
PowerPoint Step Shank Pins
8mm Head Diameter Top Hat Drive Pins — Improved attachment to inconsistant materials
Part
No.
SP58TH
1906
1908
Shank
Len. 721
5/8"
3/4"
1"
Philadelphia, PA
610-647-8070
•
•
•
Auto
Fast
D60
•
•
•
•
Washington D.C.
877-419-2755
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
Boston , MA
800-645-6155
•
•
•
Hartford, CT
800-969-0285
121
Rentals
Safety
Shank Dia:.145" (SP58TH =.150), Head diameter 8mm (SP58TH = .300")
Packaged: 100/box.
Fasteners
Ramset® powder actuated fasteners
PowerPoint Step Shank Pins — Used for fastening into harder steel and concrete.
Anchors
Shank Dia:.150"/.180", Head Dia: .300"
Packaged: 100/box.
Part
No.
SP100
SP114
SP112
SP178
Shank
Auto
Len. MM Fast
1"
1-1/4"
1-1/2"
1-7/8"
D60
•
•
•
•
25.4
31.8
38.1
47.6
•
•
•
•
Rocket
HD22
SA270 D45A Cobra RS22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Strut
1/4"-20 Threaded Studs — For applications that require removability or require shimming.
HD22
Rocket
Auto
RS22 Cobra D45A SA270 D60 Fast
Threaded
Rod
Shank Dia:.145", Packaged: 100/box.
K = Knurled Shank
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lengths
Part
721 Shank Thread No.
•
•
1/2"
1"
1"
3/4" 1623WK
1/2" 1642W
3/4" 1643W
3/8"-16 Threaded Studs — For applications that require removability or require shimming.
Powers Powers Ramset Ramset Hilti
Hilti
Hilti Shank
P3600 P3801 D60
721 DX E37 DX450 DXA41 Len.
Pipe
Hangers
•
•
•
Shank Dia:.145", Thread Length: 1-1/4"
Packaged: 100/box. K = Knurled Shank
Hybrid Fasteners
•
•
•
•
•
•
Tools
Hybrid Threaded Rod Hanger
Abrasives
Use with Ramset Tools: 721, Autofast,
D60, SA270, Rocket/D45A, Cobra, Viper,
RS22/HD22, R150/T3SS
1" Premium PowerPoint pin preassembled to a 16 guage
threaded rod hanger. Shank Dia.: .125"/.150". Head Dia.:
.300". 50 per box.
OnSite
Supply
14TRHSS10
38TRHSS10
Description
1/4" Rod Hanger
3/8" Rod Hanger
Hybrid Pin
For general purpose fastening to concrete
Use With All Ramset Powder Tools/All Ramset
Single Pin Gas Tools
Safety
PowerPoint step shank pin preassembled to
1/2" washer. Shank Dia.: .125"/.150". Head Dia.:
.300". 500 per box.
Part No.
Rentals
M100BB
122
•
•
•
•
•
•
•
•
•
3/4"K 50340
1"
50342
1-1/4" 50344
— Engineered To Be Used In Either Gas Or Powder Actuated Tools.
For suspended ceilings, piping and
other applications using 1/4" or 3/8"
threaded rod
Part No.
Part
No.
Description
1" PowerPoint Step Shank Pin
with 1/2" domed washer & flute
Hartford, CT
800-969-0285
Hybrid Conduit Clamp
For attaching conduit to concrete
Use With Ramset Tools: 721, Viper, RS22/HD22,
R150/T3SS
1" Premium PowerPoint pin preassembled to an
18 guage condit clamp. Shank Dia.: .125"/.150". Head Dia.:
.300". 50 per box.
Part No.
Description
12CCSS10L
34CCSS10L
1/2" Conduit Clamp
3/4" Conduit Clamp
Hybrid One Hole Conduit Strap
For attaching conduit or armored cable to concrete
Use With Ramset Tools: 721, Autofast, D60,
SA270, Rocket/D45A, Cobra, Viper, RS22/
HD22, R150/T3SS
1" Premium PowerPoint pin preassembled to an
18 guage condit strap. Shank Dia.: .125"/.150".
Head Dia.: .300". 100 per box.
Part No.
38HSSS10
12HSSS10
34HSSS10
10HSSS10
Boston , MA
800-645-6155
Description
3/8" Hole Strap
1/2" Hole Strap
3/4" Hole Strap
1" Hole Strap
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
J-Master Tool® (L1700)
Anchors
• For attachment of J-Clip® (L1701)
and JClip-Pur® (L1801) Hanger
Wire Clips.
J-Clip® (L1701)
• Strong, reliable attachment of pre-tied
hanger wire.
Viper .27 Caliber
Semi-Automatic Strip Tool
Specifically Designed for Overhead
Applications. 1-1/2" Pin Capacity
• Each clip fits 1/16" 1/4" flanges.
Threaded
Rod
• Disengages from J-Master
Tool after installation.
• Two magnetic strips attached to J-Master tool
make installation easy.
Part No.
L1700
L1701
L1801
Description
J-Master Tool
J-Clip
J-Pur
Description
.27 Caliber Semi-Automatic Strip Tool
Abrasives
Viper
• Fast, easy attachment of
pre-tied hanger wire from
Z-Purling.
Tools
• 27 caliber, 10-strip loads: 2 (Brown), 3 (Green), 4 (Yellow), 5 (Red)
• Weight: 4.5 pounds
• Maximum Pin Length: 1-1/2"
• Length: 17 inches
J-Pur® (L1801)
Pipe
Hangers
Specifications
Part No.
Strut
• Use for open web bar
joists or purlins.
• Automatic load advance each time the Viper is fired.
• Automatic piston return.
• Overdrive protection. Heavy duty buffer system prevents front end damage caused by piston overdrive
• Completely redesigned open-ended muzzle keeps tool
cleaner longer.
• Simplified barrel retention collar. No tools are required
for assembly or disassembly.
• Screws securely into the end of the extension pole
with the steel collar ensuring a more durable and rigid
connection.
• 5 Year Warranty.
Fasteners
Ramset® powder tools for overhead
Viper Pole Tools
VPOL6
VPOL8
TVPOL612
TVPOL618
Philadelphia, PA
610-647-8070
Description
6' Fixed Length Pole Tool for Viper
8' Fixed Length Pole Tool for Viper
6'-12' Telescoping Pole Tool for Viper
6'-18' Telescoping Pole Tool for Viper
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Part No.
PTSEMI6
PTSEMI8
OnSite
Supply
• Rubber “motorcycle” grip for comfort and to
reduce recoil level
• Delrin™ coupler on cable makes pole di-electric
• Nyloc™ nuts keep your adjustment fixed solidly
on the trigger bar
• Top-quality hand lever
• Lightweight cast aluminum housing fits tool
snugly and provides tool protection
• Trigger bar adjusts easily for individual tools
Safety
Part No.
Pole Tools
For Ramset D60, SA270, D45A & Hilti DX36
Description
6' Fixed Length Pole Tool
8' Fixed Length Pole Tool
Hartford, CT
800-969-0285
123
Rentals
• Rubber “motorcycle” grip for comfort and to
reduce recoil level
• Delrin™ coupler on cable makes pole di-electric
• Nyloc™ nuts keep your adjustment fixed solidly on the trigger bar
• Top-quality hand lever
• Lightweight cast aluminum housing fits tool
snugly and provides tool protection
• Telescoping poles are adjustable in 1' increments
• Trigger bar adjusts easily for individual tools
Fasteners
Overhead Fastening
SDC100 Pre-Ties
HANGER WIRE & PRE-TIES
Anchors
1" Pin & Clip
Pre-Tied To 12 Gauge Wire
Part No.
Description
SDC100-3.6
SDC100-5.6
SDC100-7.6
SDC100-9.6
SDC100-11.6
4 ft. w/1" Angle Clip
6 ft. w/1" Angle Clip
8 ft. w/1" Angle Clip
10 ft. w/1" Angle Clip
12 ft. w/1" Angle Clip
Strut
Threaded
Rod
CEILING CLIP ASSEMBLIES
HANGER / TIE WIRE
Ceiling Clip
Assemblies
Ceiling Hanger Wire - 12 Gauge
12' Lengths. Sold by Bundle of 1,680 ft. Priced per 1,000 ft.
Pipe
Hangers
Part No.
Description
12G1200HAW Ceiling Hanger Wire 12 gauge
Rodmans Tie Wire - 16 Gauge
SDC100
SDC125*
Description
Pin Length
Ceiling Clip Assemblies
Ceiling Clip Assemblies
Tools
Tie Wire 16 gauge
Abrasives
U-Hank Tie Wire - 18 Gauge
Pin Preassembled to a 14 gauge angle
clip. Shank diameter: .150" (SPC114 =
.150/.180,) Head diameter: .300. 1000
per box.
18 gauge x 48". 25 lb. per box
Part No.
Part No.
SPC78
SPC114
Description
UHANK
1"
1-1/4"
Powerpoint Pins
With Ceiling Clips
Description
TIE16GA350
Part No.
*Available in 100-Pack (part no. SDC125C)
3-1/2 lb. spool. 20 spools per box.
Part No.
Pin Preassembled to a 14 gauge angle
clip. Shank diameter: .145", Head diameter: .300. 1000 per box.
U-Hank Tie Wire 18 gauge
Description
Pin Length
Powerpoint Pin
Powerpoint Pin
7/8"
1-1/4"
Fastener Accessories
OnSite
Supply
Angle Clips and
Washers
Safety
Insulation Washer
22 gauge metal washer. 100 per box.
Part No.
IW
Rentals
124
Description
1-7/16" Insulation Washer
14 gauge angle clip. 100 per box.
22 gauge metal washer. 100 per box.
Part No.
1202CF
1183A
Hartford, CT
800-969-0285
Description
3/4" Angle Clip
1-7/16" Metal Washer
Boston , MA
800-645-6155
LADD Assembly
for L1600
1-1/4" preassembled pin and clip.13
gauge angle clip. Shank diameter: .152"
Head diameter: .300. 100 per box.
Part No.
L652
Description
LADD Assembly
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Strut Channel
Strut Fittings & Accessories
Strut Grids - Designed, Engineered,
Stamped . . . . . . . . . . . . . . 2, 169
Beam Clamps . . . . . . . . 137-138
Brackets . . . . . . . . . . . . . . . . 137
Hanging Systems CADDY "Speed-Link"
GRIPPLE . . . . . . . . . . . 165 - 168
Post Bases - Brackets . . . . . . 137
Strut Fittings . . . . . . . . . 136, 139
Channel Nut Selection Chart 134
Spring - (Channel) Nuts . . . . . 135
Pipe & Conduit Clamps
Duct Spacers . . . . . . . . . . . . . 153
Fiberglass Strut System 150 - 151
Non-Metallic Cable Rack . . . . 152
Stainless Steel Strut / Hangers/
Hardware . . . . . . . . . . . . . . . 154
CADDY®
Acoustical . . . . . . . . . . . . . . . 163
Beam Clamps / Clips . . 156 - 157
Conduit / Cable . . . . . . 160 - 162
Datacomm ITS . . . . . . . . . . . . 164
Hangers / Hanging Systems 168
Pyramid / Rooftop Supports 155
ROD LOCK Beam Clamps/Nuts 127
SPEED LINK . . . . . . . . . . . . . 168
Stud Wall . . . . . . . . . . 158 - 159
Fasteners
Tools
Stainless / Fiberglass
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
125
Rentals
Safety
Clic . . . . . . . . . . . . . . . . . . . . 143
Cush-A-Clamp® . . . . . . . . . . . 141
Cush-A-Claw Strut Clamps . . . 144
Holdrite Strut Clamps . . . . . . 139
Hydrazorb . . . . . . . . . . . . . . . 141
Klo-Shure Couplings . . . . . . . . 142
Pipe and Conduit Clamps
(Strut Straps) . . . . . . . . 140, 145
Porcelain Clamps . . . . . . 139-140
Snap-N-Strut . . . . . . . . . . . . . 144
Cable Tray Systems . . . 146 - 149
Abrasives
Spring Nuts
Cable Tray
OnSite
Supply
Concrete Insert . . . . . . . . . . . 133
Fiberglass Strut Systems 150-151
Stainless Steel Strut . . . . . . . 154
Strut Channel Overview . . . . . 128
Strut Channel . . . . . . . 130 - 133
Strut Channel - Finishes . . . . . 126
Strut Channel - Hole Patterns 129
Slotted Angle . . . . . . . . . . . . 132
Raceway . . . . . . . . . . . . . . . . 133
Roof Top Supports 155, 236-242
Pipe
Hangers
Strut / Cable Tray / Caddy
Threaded
Rod
Strut
Anchors
Quick Reference
Fasteners
Strut systems - finishes
Product Categories
Channel
Steel Channel Finishes
Anchors
Pre-Galvanized
Electro-Galvanized
Hot-Dipped Galvanized
Material (steel strip) is coated
with zinc by hot-dip process
prior to roll-forming or press
operations. The zinc coating
weight is G90 conforming to
ASTM Specification A653 GR 33.
Parts, screws and nuts are
coated with zinc electrolytically
to commercial standards (ASTM
- B633 Type III C1).
Material is coated with zinc
after being roll-formed or after
all manufacturing operations
are completed, conforming to
ASTM specification No. A123
or A153.
Power-Green®
Power-Gold®
Plain
Channel and parts are carefully
cleaned and phosphated.
Immediately after phosphating,
a uniform coat of a highly
effective rust-inhibiting acrylic
enamel paint is applied
by electro-deposition and
thoroughly baked.
A .5 mil electro-galvanized
is applied with a cohesive
molecular bond to the base
metal steel, in compliance with
the ASTM B633 standard.
Yellow Dichromate is applied
over the zinc and results in a
gold appearance which acts as
a non-porous barrier sealant.
Plain finish designation means
that the channel retains the
oiled surface applied to the raw
steel during the rolling process.
The fittings have the original
oiled surface of the bar-stock
material.
Channel (Spring)
Nuts
Pipe & Conduit
Clamps
(Strut Straps)
Strut Fittings
Strut
Materials and
Finishes
Material
Threaded
Rod
• Steel
• Stainless Steel -
Types (304/316)
• Aluminum
• Fiberglass
Finishes (Channel)
Pipe
Hangers
Tools
• Pre-Galvanized (EG)
• Hot-Dipped Galvanized
(HDG)
• Plain (PLN)
• Stainless Steel (SS)
• Fiberglass (VE & PE)
• Power-Gold® / Gold
Galv® (ZD)
• Power-Green®
• PVC Coated
Finishes (Fittings)
Abrasives
• Electro-Galvanized (EG)
• Hot-Dipped Galvanized
(HDG)
• Plain (PLN)
• Stainless Steel (SS)
• Fiberglass (VE & PE)
• PVC Coated
Full Line of Stainless
Steel and Fiberglass
Special Materials
Stainless Steel
Aluminum
Fiberglass
OnSite
Supply
• Channel
• Fittings & Accessories
• Bridge Hangers
Standard Lengths
• 10 ft.
• 20 ft.
• Cut to length available
upon request
Safety
Major Manufacturers
Material in accordance with
ASTM A 240 (Type 304/316).
Material in accordance with
ASTM A 240 (Type 304/316).
Rentals
• Power-Strut®
• Super-Strut®
• Unistrut®
• Versabar®
• Haydon®
• Aickenstrut®
126
Aickinstrut Polyester, Vinylester.
UNISTRUT®
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
CADDY® Rod Lock Beam Clamp for 3/8" Rod
• Reduces installation time up to 60%
• Load capacity (3/8" rod):
1/8" to 5/16" flange - 250 lbs.
3/8" - 7/16" flange - 500 lbs.
• Maximum Pipe diameter supported by Clamp and
Threaded Rod: 4"
• (UL® 203 & UL 2239 Approved
• FM® Approved (when installed with the set screw
on the load side only
Threaded
Rod
• Works with slightly damaged threads and minor
burrs on the threaded rod
Pipe
Hangers
See page 173 for CADDY SN
Series Slip-On Lock Nuts
Strut
Anchors
CADDY® ROD LOCK is an innovative threaded rod mounting system from ERICO
that provides a quick and economical solution for installing electrical and mechanical systems supported by threaded rod. The system includes the CADDY
ROD LOCK beam clamp and channel nut. With its breakthrough “push-install”
design, the patent-pending CADDY ROD LOCK simplifies the installation of
threaded rod. Simply push the threaded rod through the mounting hole and
it instantly locks into position. The system can even be used on threaded rod
with slightly damaged threads or minor burrs, helping to save time by minimizing the amount of de-burring that is usually required prior to installation. The unique features of the CADDY ROD LOCK system help to reduce
the installation time of threaded rod by up to 60% compared to conventional fasteners. In many common applications, the system also requires less
installation hardware. CADDY ROD LOCK is another innovation from ERICO designed
to help the construction industry complete projects faster, easier and more efficiently.
Fasteners
NEW INNOVATIVE PRoducts - Caddy® Rod Lock
Tools
* Not to be used with hot-dipped galvanized hardware/components.
Description
Part No.
CRLB37EG
3/8" CADDY® ROD LOCK Beam Clamp
• Works with slightly damaged threads and minor
burrs on the threaded rod
OnSite
Supply
Abrasives
CADDY® Rod Lock Channel Nut for 3/8" Rod
• Reduces installation time up to 34%
Safety
• Max. Rec. Load (3/8" rod): 1200 lbs. (see N1)
• Slip Load Load (3/8" Rod): 400 lbs. (see N2)
• Electro-Galvanized ductile iron
Description
CRLS37EG
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
3/8" CADDY® ROD LOCK Channel Nut
Hartford, CT
800-969-0285
127
Rentals
Part No.
Fasteners
Strut channel overview
PS 100 1-5/8" x 3-1/4" x 12 ga. H-1200
PS 150 1-5/8" x 2-7/16" x 12 ga.
Welded Configurations
Welded Configurations
Anchors
PS150
2 7/16"
3 ¼"
DEEP
PS100
DEEP
Strut
PS150 2T3
PS100 2T3
PS 200 1-5/8" x 1-5/8" x 12 ga.
Welded Configurations
Threaded
Rod
1 5/8"
DEEP
PS200
12
GAUGE
Pipe
Hangers
PS200 PLA
PS200 2T2
PS200 2T3
PS200 2T4 PS200 2T5 PS200 PLC
PS200 PLB
PS 210 1-5/8" x 1-5/8" x 14 ga.
PS 300 1-5/8" x 1-3/8" x 12 ga.
Welded Configurations
Welded Configurations
Tools
1 5/8"
1 3/8"
DEEP
PS210
14
PS300
DEEP
GAUGE
PS300 2T3
PS210 2T3
Abrasives
PS 400 1-5/8" x 1" x 12 ga.
PS 500 1-5/8" x 13/16" x 14 ga.
Welded Configurations
Welded Configurations
13
1"
PS400
DEEP
/16"
DEEP
OnSite
Supply
PS400 2T3
PS 520 1-5/8" x 13/16" x 12 ga.
14
PS500 2T3
PS 560 1-5/8" x 13/16" x 16 ga.
Welded Configurations
13
PS500
GAUGE
Welded Configurations
/16"
DEEP
PS520
Safety
12
PS560
GAUGE
PS500 2T3
PS 5000 2" x 2" x 10 ga.
See Heavy
Duty Channel
Rentals
128
PS560 2T3
PS 600J 13/16" x 13/16" x 19 ga.
PS 700J 13/16" x 13/32" x 19 ga.
See
Junior Channel
See
Junior Channel
PS5000
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
PS600J
Washington D.C.
877-419-2755
PS700J
Philadelphia, PA
610-647-8070
Channel with Elongated Holes ("EH" Type - Power-Strut) (Stock)
Fasteners
STRUT channel - hole patterns
Stock
Anchors
PS 100, PS 150, PS 200, PS 210, PS 200 2T3,
PS 300, PS 400, PS 500, PS 520, PS 560
Threaded
Rod
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400,
PS 500, PS 520, PS 560
Strut
Channel with Holes ("H" Type - Power-Strut)
¾"
RS-MOD (with 3/4" Dia. Holes)
Channel with Slots ("S" Type - Power-Strut)
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400,
PS 500, PS 520, PS 560
Channel with Knock-Outs ("KO" Type - Power-Strut) (Stock)
Abrasives
PS 200 Only
Tools
Pipe
Hangers
Channel with Holes on Three Sides ("H3" Type - Power-Strut Only)
Stock
OnSite
Supply
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400
PS 200 Only
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
129
Rentals
Safety
Channel with Slotted Back ("SB" Type - Power-Strut Only)
Fasteners
Strut - Channel
“Deep” Strut
Stock
1-5/8” x 1-5/8” x 12 gauge
Anchors
• 10’
• 20’
• 10’
• 20’
• 10’
• 20’
• 10’
• 20’
• 20’
PS 200
Ordering Note: Please specify PS 210 if you
require 14 gauge 1-5/8” x 1-5/8” channel
Strut
Threaded
Rod
Plain
Pre-Galvanized
Green
Hot Dip Galv.
304 S/S
316 S/S
Aluminum
PVC Coated
Fiberglass
10’ Solid
x
PS200EG10
PS200GR10
PS200HDG10
PS200SS10
x
PS200AL10
PS200PVC10
/AIC20P2000
20’ Solid
x
PS200GE20
PS200GR20
PS200HDG20
PS200SS10
x
PS200AL20
PS200PVC20
N/A
10’ Slotted EH
x
PS200EHEG10
PS200EHEGR10
PS200EHHDG10
PS200EHSS10
x
PS200EHAL10
PS200EHPVC10
/AIC20P2200
Pre-Galvanized
Pre-Galvanized
Green
Green
Stainless Steel
Stainless Steel
HDG
HDG
Aluminum
PS 200 - No Holes
20’ Slotted EH
x
PS200EHEG20
PS200EHGR20
PS200EHHDG20
PS200EHSS20
x
PS200EHAL20
PS200EHPVC20
N/A
PS 200 EH - With Holes
“Deep” Strut
1-5/8” x 1-5/8” x 14 gauge
Pipe
Hangers
PS 210
“Shallow” Strut
Stock
1-5/8” x 13/16” x 14 gauge
Tools
PS 500
Ordering Note: PS 500 14 gauge is standard. If you
require 12 gauge, please specify PS 520 12 gauge.
Abrasives
Plain
Pre-Galvanized
Green
Hot Dip Galv.
304 S/S
316 S/S
Aluminum
PVC Coated
Fiberglass
10’ Solid
x
PS500EG10
PS500GR10
x
x
x
N/A
x
N/A
20’ Solid
x
PS500GE20
PS500GR20
x
x
x
N/A
x
N/A
• 10’
• 20’
• 10’
• 20’
• 10’
• 20’
10’ Slotted EH
x
PS500EHG10
PS500EHGR10
x
x
x
N/A
x
N/A
Pre-Galvanized
Pre-Galvanized
Green
Green
Stainless Steel
Stainless Steel
PS 500 - No Holes
20’ Slotted EH
x
PS500EHEG20
PS500EHGR20
x
x
x
N/A
x
N/A
PS 500 EH- With Holes
OnSite
Supply
Threaded Rod and Studs
Ordering Note: Threaded rod in stock 6’, 10’ and 12’ lengths.
Studs cut to any length. Stocked in larger diameters.
Call for availability over 1” diameter.
Safety
Rentals
Size
1/4
3/8
1/2
5/8
3/4
7/8
1
130
Max. Load (lb)
240
730
1,350
2,160
3,230
4,480
5,900
Black 6’
25 C 600 Thread
37 C 600 Thread
50 C 600 Thread
62 C 600 Thread
75 C 600 Thread
87 C 600 Thread
100 C 600 Thread
E.G. 6’
25 C 600 Thread
37 C 600 Thread
50 C 600 Thread
62 C 600 Thread
75 C 600 Thread
87 C 600 Thread
100 C 600 Thread
Hartford, CT
800-969-0285
Finishes
• Carbon steel plain and
zinc plated
• Hot dip galvanized
• Stainless steel
Type 304 and Type 316
• B7 (ASTM A193)
• Fiberglass
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Plain
Pre-Galvanized
Green
Hot Dip Galv.
304 S/S
316 S/S
Aluminum
PVC Coated
Fiberglass
10’ Solid
x
PS2002T3EG10
PS2002T3GR10
PS2002T3HDG10
x
x
N/A
x
N/A
20’ Solid
x
PS2002T3EG20
PS2002T3GR20
PS2002T3HDG10
x
x
N/A
x
N/A
10’ Slotted EH
x
PS2002T3EHEG10
PS2002T3EHGR10
x
x
x
N/A
x
N/A
Pre-Galvanized
Pre-Galvanized
Green
Green
20’ Slotted EH
x
PS2002T3EHEG20
PS2002T3EHGR20
x
x
x
N/A
x
N/A
“Back to Back” with Holes
PS 200 2T3 - No Holes
Strut
• 10’
• 20’
• 10’
• 20’
PS 200 2T3: 1-5/8” x 1-5/8” x 12 gauge welded channel
Fasteners
Stock:
PS 200 2T3 EH- With Holes
Abrasives
10’ Slotted EH
x
PS150EHEG10
PS150EHGR10
x
N/A
N/A
N/A
x
N/A
20’ Slotted EH
x
PS150EHEG20
PS150EHGR20
x
N/A
N/A
N/A
x
N/A
PS 150 - With Holes
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
131
Rentals
Safety
20’ Solid
x
PS150EG20
PS150GR20
x
N/A
N/A
N/A
x
N/A
Pre-Galvanized
Pre-Galvanized
Green
Green
OnSite
Supply
• 10’
• 20’
• 10’
• 20’
PS 150: 1-5/8” x 2-7/16” x 12 gauge
10’ Solid
Plain
x
Pre-Galvanized PS150EG10
Green
PS150GR10
Hot Dip Galv. x
N/A
304 S/S
316 S/S
N/A
Aluminum
N/A
x
PVC Coated
Fiberglass
N/A
PS 150 - No Holes
Stock
“2-7/16” Deep”
Tools
Pipe
Hangers
PS 200 2T3): 1-5/8” x 1-5/8” x 12 gauge welded channel
Threaded
Rod
“Back to Back“
Anchors
STRUT - channel
Fasteners
SLotted Angle
• 10’
• 20’
• 10’
• 20’
PS 100: 1-5/8” x 3-1/4” x 12 gauge
Anchors
Strut
10’ Solid
Plain
x
Pre-Galvanized PS100EG10
Green
PS100GR10
Hot Dip Galv. x
304 S/S
N/A
N/A
316 S/S
Aluminum
N/A
PVC Coated
x
N/A
Fiberglass
PS 100 - No Holes
Stock
“3-1/4” Deep”
20’ Solid
x
PS100EG20
PS100GR20
x
N/A
N/A
N/A
x
N/A
10’ Slotted EH
x
PS100EHEG10
PS100EHGR10
x
N/A
N/A
N/A
x
N/A
Pre-Galvanized
Pre-Galvanized
Green
Green
20’ Slotted EH
x
PS100EHEG20
PS100EHGR20
x
N/A
N/A
N/A
x
N/A
PS 100 - With Holes
Threaded
Rod
Pipe
Hangers
Knock-Out (KO)
Slotted Angle
PS 200 KO6: 1-5/8” x 12 gauge with KO
6” on center
Tools
PA-158 Light Duty
10’ Pre-Galvanized
20’ Pre-Galvanized
1-5/8” x 1-5/8” x 14
gauge
10’ Pre-Galvanized
Abrasives
PS 707 (AB-844)
Raceway Closure Strip (Green
and Pre-Galvanized)
PA-238 Medium Duty
1-5/8” x 2-3/8” x 14
gauge
OnSite
Supply
10’ Pre-Galvanized
PS 6151 (AB-844 PC)
Plastic Closure Strip
PA-318 Heavy Duty
Safety
)
1-5/8” x 3-1/8” x 12
gauge
10’ Pre-Galvanized
Rentals
132
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Section Height
Part No.
Section Height
PS 100
PS 150
PS 200
PS 210
PS 300
PS 400
PS 500
3-1/4
2-7/16
1-5/8
1-5/8
1-3/8
1
1-3/16
PS 100 KO6
PS 150 KO6
PS 200 KO6
PS 210 KO6
PS 300 KO6
PS 400 KO6
3-1/4
2-7/16
1-5/8
1-5/8
1-3/8
1
Slotted Support System
Knockout Fluorescent Raceway System
This system is designed for maximum
ease of attaching fixture through slotted
channel with shoulder bolt and provides
positive alignment.
Listed by Underwriter’s Laboratories, Inc.
Fixture is attached to slot-up channel with
Chase nipple, locknut and bushing through
knock-outs in bottom of channel. Conduit
connector fitting PS-2561 holds channel and
fixture to pipe or rod.
Pipe
Hangers
Note: Specify “S” Type Slotted Channel
Fasteners
Part No.
Strut
Knock-Out Raceway
Threaded
Rod
Solid Raceway
Anchors
Raceway Concrete Insert Channel
Concrete Inserts
Tools
Junior Channel
Abrasives
Use w/
Wt. per
Part No. Insert Finish 100 pcs.
Note: A full line of fittings and
accessories are available to fit
junior size channel.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
133
Rentals
Choice of end cap is based on the distance from the end of
the insert to the first anchor as shown below.
Safety
OnSite
Supply
PS 656 PS 349 PGAL 8
PS 901 PS 449 PGAL 6
Fasteners
channel nut selection chart
NUTS
CHANNEL
Anchors
PS LS
PS 100
3-1/4"
Strut
PS 150
2-7/16"
PS SS
PS RS
✔
✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔ ✔
Threaded
Rod
Pipe
Hangers
PS 300
1-3/8"
Tools
Abrasives
PS 520
13/16"
PS 3281
✔
1-5/8"
13/16"
PS TG
✔ ✔
PS 210
PS 500
PS 517
✔
1-5/8"
1"
PS NS S
✔
PS 200
PS 400
PS NS
OnSite
Supply
✔
✔ ✔
✔ ✔
✔
✔ ✔
✔ ✔
✔
✔ ✔
✔ ✔
✔
✔ ✔
PS 560
13/16"
Slip-On Lock Nuts
Safety
The Slip-On Lock (R) Lock Nut has been developed with
the ability to be positioned on threaded rod at any point,
without the time consuming nuisance of threading.
"The force in strut fittings"
Just open the Slip-On Lock Nut and insert where needed.
Twist close and tighten with a wrench. It’s that simple.
Rentals
See page 173 for ordering information
134
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
"Short Spring Nuts" PSSS
Superstrut (B-100)
1/4
3/8
1/2
5/8
"No Spring Regular"
PSNS
Superstrut (AB-100)
EG
1/4
5/16
3/8
1/2
5/8
3/4
7/8
PSNS 1/4EG
X
PSNS 3/8EG
PSNS 1/2EG
PSNS 5/8EG
PSNS 3/4EG
PSNS 7/8EG
Size
EG
1/4 x 1
1/4 x 1-1/2
1/4 x 2
3/8 x 1
3/8 x 1-1/4
1/2 x 1
PSSS 1/4EG
PSSS 3/8EG
PSSS 1/2EG
PSSS 5/8EG
Size
N/A
N/A
N/A
PSRS 1/4SS
N/A
PSRS 3/8SS
PSRS 1/2SS
PSRS 5/8SS
X
X
Standard: EG - Zinc Plated (Electro-Galvanized)
EG
Standard: EG - Zinc Plated
(Electro-Galvanized)
N/A
N/A
N/A
PSRS 1/4HDG
N/A
PSRS 3/8HDG
PSRS 1/2HDG
PSRS 5/8HDG
PSRS 3/4HDG
PSRS 7/8HDG
"Stud Nut" PS 517
Regular Spring Nut w/Stud
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size
X
X
X
PSRS 1/4EG
X
PSRS 3/8EG
PSRS 1/2EG
PSRS 5/8EG
PSRS 3/4EG
PSRS 7/8EG
SS
3/8 x 1-1/2
3/8 x 2
1/2 x 1
1/2 - 1-1/4
1/2 - 1-1/2
1/2 - 2
EG
X
X
X
X
X
X
"Top Lock" Cone Nuts
PSTG
"Twirl-Nut®"
B-Line Top Lock
Standard: EG - Zinc Plated
(Electro-Galvanized)
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size
X
X
X
X
X
X
Size
1/4
3/8
1/2
Size
EG
PSNS 1/4EG
PSNS 3/8EG
PSNS 1/2EG
1/4
3/8
1/2
EG
25 CTNUZ
37 CTNUZ
50 CTNUZ
"Caddy Slick™ Strut Nut"
Standard: Dacromet 320 finish
Features:
Size
1/2
5/8
3/4
EG
PSNSS 1/4EG
PSNSS 3/8EG
PSNSS 1/2EG
Philadelphia, PA
610-647-8070
Part No.
Thread Size
SLICK250
SLICK375
SLICK500
1/4-20
3/8-16
1/2-13
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
• Fits all standard strut depths.
• Installs with one hand.
• No more hard to handle spring nuts
• Reduce installation time and hardware by 60%
• Integral plastic strip provides tension to grip
strut, even vertically.
• Allows for easy repositioning or removal.
Standard: EG - Zinc Plated
(Electro-Galvanized)
OnSite
Supply
Fast universal attachment of threaded rod and hardware
to standard strut profiles. Reduces installation time by
over 75%.
"No Spring Shallow"
PSNSS
Superstrut (AC-100)
Fasteners
Strut
PSLS 1/4EG
PSLS 3/8EG
PSLS 1/2EG
PSLS 5/8EG
PSLS 3/4EG
HDG
Threaded
Rod
1/4
3/8
1/2
5/8
3/4
8-32
10-24
10-32
1/4
5/16
3/8
1/2
5/8
3/4
7/8
EG
EG
Pipe
Hangers
Size
Tools
Size
Standard: EG - Zinc Plated (Electro-Galvanized)
Also Available: HDG - Hot-Dipped Galvanized & Stainless Steel -
Abrasives
Standard: EG - Zinc Plated
(Electro-Galvanized)
"Regular Spring Nuts" PSRS (Superstrut A-100)
135
Rentals
"Long Spring Nuts" PSLS
Superstrut (H-100)
Anchors
spring (channel) Nuts
Fasteners
strut fittings
2-Hole 90º Corner Angle
3-Hole 90º Corner Angle
Anchors
Strut
PS 603
AB-202
PS 604
AB-201
4-Hole 90º Corner Angle
PS 605
AB-204
PS 606
AB-203
3-Hole Flat Angle
Tee Plate
Threaded
Rod
Pipe
Hangers
PS 714
AB-220
PS 660
PS 718
AB-219
4-Hole Splice Clevis
4-Hole Splice
Open 4-Hole Angle
Closed 4-Hole Angle
PS 616
AB-208
PS 888
X-207
PS 781 - Degree Range
7‑1/2° — 82‑1/2°
PS 793 / AB-225 - Degree Range
7‑1/2° - 82‑1/2°
2-Hole Open Angle
Connector
Square Washer
No Twist Washer
U-Washer
Tools
PS 607
AB-205
Abrasives
OnSite
Supply
Safety
PS 633 / AB-227
Degree Range
7‑1/2° — 82‑1/2°
PS 619-1/4” AB -241-1/4”
PS 619-3/8” AB -241-3/8”
PS 619-1/2” AB-241-1/2”
PS 619-5/8” AB-241-5/8”
PS 619-3/4” AB-241-3/4”
PS 2504-1/4”
PS 2504-3/8”
PS 2504-1/2”
PS 288-3/8” AB-288-3/8”
PS 288-1/2” AB-288-1/2”
PS 288-5/8” AB-288-5/8”
Rentals
Many other variations of fitting are available - consult Engineering Catalog.
136
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Post Bases
PS 2651 T1 / BC60
Anchors
For 1-5/8” Channel
Use with 1-5/8 x 1-3/16 (PS 500)
1-5/8 x 1-5/8 (PS 200)
PS 2651 T2 / BC61
Use with 1-5/8 x 3-1/4 (PS 100)
1-5/8 x 2-7/16 (PS 150)
1-5/8 X 1-5/8 (PS 200 T3)
-Welded back-to-back
PS 3033
AP-232
Rollers
PS 3033 SQ - Square
AP-232 SQ
Strut
U-Bolt Beam Clamps
Fasteners
post bases - brackets
1”
6 1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-5/8
6-5/8
7
7
7-1/4
Insulation Thickness
1-1/2” 2”
2-1/2” 3”
6-5/8
6-5/8
6-7/8
6-7/8
7-1/8
7-1/8
7-1/2
7-1/2
7-5/8
6-7/8
6-7/8
7-1/8
7-1/8
7-3/8
7-3/8
7-3/4
7-3/4
7-7/8
4”
For 1-5/8” Back to Back Channel
PS 3064 / AP-235
Double Column Post Base
7-3/8
7-3/8
7-1/2
7-1/2
7-7/8
7-7/8
8
8
8
8-1/8
8-1/8
8-3/8
Tools
Pipe
No
Size Insulation
1/2
6-1/2
3/4
6-1/2
1
6-1/2
1-1/4 6-1/2
1-1/2 6-1/2
2
6-1/2
2-1/2 6-1/2
3
6-1/2
3-1/2 6-1/2
4
6-5/8
Pipe
Hangers
Threaded
Rod
PS 1901 Series
9
B
4
4
6
6
6
6
6
Uniform Wt. per
Load* 100 Pcs
800
168
800
202
900
258
900
292
1,200 381
1,200 416
1,000 461
A
Size
6
12
18
24
PS 661
Philadelphia, PA
610-647-8070
Uniform
Load*
1,200
600
400
300
Wt. per
100 Pcs
185
293
401
509
*Mounted on 12 ga Channel
PS 651
Uniform
Load*
1,600
800
600
450
*Mounted on 12 ga Channel
Washington D.C.
877-419-2755
A
Size
6
12
18
24
A
Size
12
18
24
30
36
PS 809
Boston , MA
800-645-6155
Uniform
Load*
2,000
1,300
1,000
800
650
Wt. per
100 Pcs
502
692
882
1,072
1,262
OnSite
Supply
A
8-1/2
10-1/2
12-1/2
14-1/2
16-1/2
18-1/2
20-1/2
*Mounted on 12 ga Channel
Hartford, CT
800-969-0285
137
Rentals
PS 732
Size
8
10
12
14
16
18
20
Safety
Brackets
Abrasives
Use with: PS 100, PS 200 2T3, PS 210 2T3
Fasteners
beam clamps & strut fittings
Universal Angle Bracket
End Caps
1/4” Electrical Junior
Top Beam Clamp
Anchors
Malleable Iron
Michigan Model #BC26EG
Strut
PS 6153 - Plastic
PS 656 - Steel
PS 3373
“U” Support
Threaded
Rod
Part
No.
Uses Finish
with
PS 902
PS 2580
PS 655
PS 2585
PS 656
PS 901
PS 930
PS 100
PS 150
PS 200
PS 210
PS 300
PS 400
PS 500
EG
EG
EG
EG
EG
EG
EG
Wt. per
A 100 pcs
3-1/4
2-7/16
1-5/8
1-5/8
1-3/8
1
13/16
22
18
11
12
15
11
5
Part
No.
Uses
with
Wt. per
100 pcs.
PS-6153-1
PS-6153-2
PS-6153-3
PS-6153-5
PS 100
PS-200,
PS-210
PS-300
PS-500,
PS-520,
PS-560
5.0
2.8
2.5
2.0
PS 613
Beam Clamps
Pipe
Hangers
*See Page 195 for more Beam Clamp information
Tools
PS 85
PS 93
PS 86
Abrasives
Rod Insulator Support
“C” Clamp
PS 85 - Malleable Iron
“C” Clamp with Locknuts
Wide Mouth
Beam Clamp
Size
1/4
3/8
1/2
PS 86 - Steel
PS 93 - Malleable Iron
Max Load No.
150
350
400
Note: 7/8” max flange
thickness
OnSite
Supply
Standard Finish - Black
EG Finish Available
Size
3/8
1/2
5/8
3/4
No Locknut
37 CCCL
50 CCCL
62 CCCL
75 CCCL
With Locknut
37 CCCN
50 CCCN
62 CCCN
75 CCCN
Size Black EG
3/8 37 CWMT 37
CWMTZ
1/2 50 CWMT 50
CWMTZ
5/8 62 CWMT 62 CWMTZ
3/4 75 CWMT 75 CWMTZ
Junior Top
Beam Clamp
Narrow 3/4 Opening
Beam Clamp
Size
3/8
1/2
5/8
Black
37 CJTB
50 CJTB
62 CJTB
EG
37 CJTBZ
50 CJTBZ
62 CJTBZ
“I” Beam Clamp
Safety
Set
Part No. Thickness
Load
Rating
Screw
Weight 100
per lb Pcs.
PS 907 1/4
PS 998 3/8
3/8
1/2
450
900
26
64
PS 135 X
PS 686
Light Duty Beam Clamp Beam Clamp
PS 907, PS 998
PS 135X
= BC-200/400
Rentals
Use with 1/4” rod
138
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
PS 686
Requires 1/2 x 1-1/2 hex bolt
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Pipe or Conduit Hanger
Right Angle Pipe Clamp
PS 51 – Malleable Iron
3/8” Rod: 1/2”, 3/4”, 1”, 1-1/4”, 1-
1/2”, 2”
1/2” Rod: 2-1/2”, 3”, 3-1/2”,
5/8” Rod: 4”, 5” 3/4” Rod: 6”,
7/8” Rod: 8”
Sizes; 3/8”, 1/2”, 3/4”, 1”, 1-1/4”,
1-1/2, 2”, 2-1/2”, 3”, 3-1/2”, 4”
Sizes: 1/2”, 3/4”, 1”, 1-1/4”,
1-1/2, 2”, 2-1/2”, 3”, 3-1/2”, 4”
“U” Support
“U” Support
Porcelain Cable Clamp
Threaded
Rod
Sizes: 1/2”, 3/4”, 1”, 1-1/4”,
1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”,
4”,
5”, 6”
PS 52 E
PS 67–Sizes
PS 723 - Porcelain Cable Clamp
PS 722 – Porce-A-Clamp®
Philadelphia, PA
610-647-8070
B
1-15/32
2-1/32
2-17/32
3-5/8
4-1/8
Four-Wheel Trolley
Tools
Two-Wheel Trolley
PS 929
PS 2521
Hole PS 1100
Size Size
2-3/4 4
2-7/8
3
3-1/8
3-1/4 5
3-3/8
3-1/2
3-5/8
3-3/4 6
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
Washington D.C.
877-419-2755
A
5-1/8
B
4-5/8
6-1/8
5-11/32
7-1/4
6-3/4
PS 2522
Zee-Support
Zee-Support
OnSite
Supply
PS 722 & 723 – Hole Sizes
• Replaces porcelain and maple
cable clam
• Non-breakable TPE material
• U.V. resistant
• U.L. listed
• Stainless steel clamps
• Tapered flange to protect cable
• Dielectric strength 525 Volts
per mil.
• One piece
• For use in accordance with
National Electrical Code ANSI/
NFPA 70
PS 2119
PS 611
Boston , MA
800-645-6155
Abrasives
To order, specify part number
and hole size according to the
table below.
Safety
Porce-A-Clamp
Hole PS 1100
Size Size
A
3/8 1
1-7/8
1/2
5/8
3/4 1-1/2 2-3/8
7/8
1
1-1/8
1-1/4 2
2-7/8
1-3/8
1-1/2
1-5/8
1-3/4 3
4
1-7/8
2
2-1/8
2-1/4 3-/12 4-1/2
2-3/8
2-1/2
2-5/8
Pipe
Hangers
To order, specify part number
and hole size according to the
table below.
Hartford, CT
800-969-0285
PS 928
139
Rentals
PS 3126
Strut
Anchors
One Piece Pipe Strap
Strut Fittings
Parallel Pipe Clamp
Fasteners
porcelain clamps & strut fittings
Fasteners
pipe and Conduit clamps (strut straps)
“Rigid” PS 1100 / 702
Anchors
Standard Pipe Clamp for
Rigid or IMC
“EMT” PS 1000 / 700
“Universal” PS 1300 / 703
Universal Pipe Clamp for Rigid,
IMC or EMT
Porce-A-Clamp
EMT Conduit Clamp
Strut
Replaces Porcelain and
Maple Cable Clamp
Threaded
Rod
Pipe
Hangers
Part No.
Size
Part No.
Size
Part No.
Size
PS 1100-3/8”
PS 1100-1/2”
PS 1100-3/4”
PS 1100-1”
PS 1100-1-1/4”
PS 1100-1-1/2”
PS 1100-2”
PS 1100-2-1/2”
PS 1100-3”
PS 1100-3-1/2”
PS 1100-4”
PS 1100-5”
PS 1100-6”
PS 1100-8”
PS 1100-10”
PS 1100-12”
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
PS 1300-1/2”
PS 1300-3/4”
PS 1300-1”
PS 1300-1-1/4”
PS 1300-1-1/2”
PS 1300-2”
1/2
3/4
1
1-1/4
1-1/2
2
PS 1000-1/2”
PS 1000-3/4”
PS 1000-1”
PS 1000-1-1/4”
PS 1000-1-1/2”
PS 1000-2”
1/2
3/4
1
1-1/4
1-1/2
2
Assembly consists of thermoplastic
elastomer cushion with plated or
stainless steel clamp.
Plated steel supplied with Everdur
bolt and nut, stainless clamp with
stainless bolt and nut.
PS 722 Z - Plated
PS 722 S - Stainless
• Non-breakable material
• UV resistant
• U L listed
PS 3792 Power-Wrap™
• Tapered flange to protect cable
• Dielectric strength 640 volts per
mil
• One piece
• Flame retardant
• Exceptional chemical resistant
Material: EPDM
Stock Thickness: 1/8”
Stock Length: 25ft / box, field cut to
length as needed
Weight/100 boxes: 253 lb
Tools
Service Temp: -70° to 350° F
Part No.
Description
S-716
Cush-A-Strip
PS 722 and 723 - Hole Sizes
20 ft per box
Abrasives
“O.D. Tubing” PS 1200 / 701
O.D. Tubing Clamp
Part No.
OnSite
Supply
Safety
PS 1200-1/4”
PS 1200-3/8”
PS 1200-1/2”
PS 1200-5/8”
PS 1200-3/4”
PS 1200-7/8”
PS 1200-1”
PS 1200-1-1/8”
PS 1200-1-1/4”
PS 1200-1-3/8”
PS 1200-1-1/2”
• Please specify E.G. PS 1200-1-5/8”
(Galvanized) or CT PS 1200-1-3/4”
(Copper)
PS 1200-1-7/8”
• Specify O.D. Size PS 1200-2”
(Not nominal
PS 1200-2-1/8”
copper
PS 1200-2-1/4”
tubing size)
PS 1200-2-3/8”
PS 1200-2-1/2”
Rentals
140
Size
Part No.
Size
Part No.
Size
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
PS 1200-2-5/8”
PS 1200-2-3/4”
PS 1200-2-7/8”
PS 1200-3”
PS 1200-3-1/8”
PS 1200-3-1/4”
PS 1200-3-3/8”
PS 1200-3-1/2”
PS 1200-3-5/8”
PS 1200-3-3/4”
PS 1200-3-7/8”
PS 1200-4”
PS 1200-4-1/8”
PS 1200-4-1/4”
PS 1200-4-3/8”
PS 1200-4-1/2”
PS 1200-4-5/8”
PS 1200-4 3/4”
PS 1200-4-7/8”
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
PS 1200-5”
PS 1200-5-1/8”
PS 1200-5-1/4”
PS 1200-5-3/8”
PS 1200-5-1/2”
PS 1200-5-5/8”
PS 1200-5-3/4”
PS 1200-5-7/8”
PS 1200-6”
PS 1200-6-1/8”
PS 1200-6-1/4”
PS 1200-6-3/8”
PS 1200-6-1/2”
PS 1200-6-5/8”
PS 1200-6-3/4”
PS 1200-6-7/8”
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-5/8
6-3/4
6-7/8
Hartford, CT
800-969-0285
Available in sizes up
thru 8-5/8” O.D.
Boston , MA
800-645-6155
Hole
Size
3/8
thru
5/8
3/4
thru
1-1/8
1-1/4
thru
1-5/8
1-3/4
thru
2-1/8
2-1/4
thru
2-5/8
2-3/4
thru
3-1/8
3-1/4
thru
3-5/8
3-3/4
thru
4-1/2
Washington D.C.
877-419-2755
PS 1100
Size
A
1
1-7/8 1-15/32
1-1/2
2-3/8 2-1/32
2
2-7/8 2-17/32
3
4
3-1/2
4-1/2 4-1/8
4
5-1/8 4-5/8
5
6-1/8 5-11/32
6
7-1/4
B
3-5/8
6-3/4
Philadelphia, PA
610-647-8070
Anchors
Cush-A-Clamp® - Hydra-Zorb
Fasteners
cush-a-clamp® / hydra-zorb™
Hydrazorb#
Part No.
Copper &
Steel
Tube
O.D. Size
Copper
Water
Pipe
(Nominal)
Hydrazorb#
PS 004T
PS 006T
PS 008T
PS 010T
PS 012T
PS 014T
PS 016T
PS 018T
PS 020T
PS 022T
PS 024N
PS 026N
PS 028N
PS 030N
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
-
1/4
3/8
1/2
5/8
3/4
-
1
-
1-1/4
-
1-1/2
-
-
100025
100037
100050
100062
100075
100087
100100
100112
100125
100137
100150
100162
100175
100187
PS 032N
PS 034N
PS 038N
PS 040N
PS 042N
PS 046N
PS 048N
PS 050N
PS 056N
PS 058N
PS 064N
PS 066N
PS 072N
PS 082N
2
2-1/8
2-3/8
2-1/2
2-5/8
2-7/8
3
3-1/8
3-1/2
3-5/8
4
4-1/8
4-1/2
5-1/8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
100200
100212
100237
100250
100262
100300
100312
100362
100412
-
Conduit
S/S
0.375
0.500
0.750
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
EMT
0.577
0.706
0.922
1.163
1.510
1.740
2.197
2.875
3.500
4.000
4.500
Rigid
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
Pipe Size
(Nominal)
Hydrazorb
#
PS 009N
PS 011N
PS 014N
PS 017N
PS 021N
PS 027N
PS 030N
PS 038N
PS 046N
PS 056N
PS 064N
PS 072N
PS 089N
PS 106N
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
20025
20037
20050
20075
200100
200125
200150
200200
200250
200300
200350
200400
200500
200600
Tools
Part No.
Philadelphia, PA
610-647-8070
Tube
Copper
0.500
0.625
0.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.126
OnSite
Supply
Sched 10
S/S
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
Notes:
1) Sched 40 and 80 PVC pipe is the same as steel pipe.
2) Copper tube OD is 1/8” larger than nominal size.
3) EMT and Rigid conduit over 2” are the same OD’s.
4) There are other types of cast iron and ductile iron pipes
that have different OD’s.
5) We sell hangers, clamps and supports that fit on the OD’s
of pipes.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Pipe
Cast Iron
AWWA
3.960
4.800
6.900
9.050
11.100
13.200
15.650
17.800
19.920
22.060
26.320
141
Rentals
Sched 40
Sched 80
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000
Abrasives
Pipe, Tube, and Conduit Outside Diameter
Size
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
Threaded
Rod
Copper
Water
Pipe
(Nominal)
Strut
Pipe Series
Copper &
Steel
Tube
O.D. Size
Pipe
Hangers
Tube Series
Part No.
Fasteners
Klo-Shure® Insulation Coupling Systems
Anchors
Klo-Shure Couplings
currently support tubing from 1/4” to 4-1/8”
diameter.
Klo-Shure Couplings
currently can be used to
secure insulation from
3/8” to 1” thick.
Klo-Shure Couplings are pre-scored
and can be opened for placement
around tubing.
Strut
Threaded
Rod
Standard Klo-Shure
coupling for use with
clevis hangers.
Pipe
Hangers
Tools
•
•
•
•
•
•
•
•
Installs in seconds!
One piece design
Supports tubing and secures insulation
Eliminates insulation compression
No metal clamps
Superior vapor barrier
Improved finish - no tape, no glue
Meets the 25/50 flame spread / smoke
developed index
Strut-mounted Klo-Shure
Coupling supplied with two
clamp halves,
fastener, and locknut.
8 Series
New Klo-Shure 8
Series, Our clampless
insulation coupling
Abrasives
P/N
1/2" Insulation
7 Series
OnSite
Supply
Safety
Ideal for securing tubing
insulation at strut-
mounted clamps
Rentals
142
2 Piece
Klo-Shure System
• 7 series clamps come
complete with strap and
insert (2 pieces)
• Sized for O.D. tubing
1/4" - 4-1/8"
• Insulation wall thickness
3/8" - 1/2"; 3/4" - 1" and
1-1/2"
Hartford, CT
800-969-0285
824050
824062
824087
824112
824137
824162
824212
Accomodates elastomeric and fiberglass
tubing insulation up
to 1” thick
Tube
O.D.
Description
1/2"
5/8"
7/8"
1-1/8"
1-3/7"
1-5/8"
2-1/8"
1/2" x 1/2"
5/8" x 1/2"
7/8" x 1/2"
1-1/8" x 1/2"
1-3/8" x 1/2"
1-5/8" x 1/2"
2-1/8" x 1/2"
5/8"
7/8"
1-1/8"
1-3/7"
5/8" x 3/4"
7/8" x 3/4"
1-1/8" x 3/4"
1-3/8" x 3/4"
7/8"
1-1/8"
1-3/7"
1-5/8"
2-1/8"
7/8" x 1"
1-1/8" x 1"
1-3/8" x 1"
1-5/8" x 1"
2-1/8" x 1"
3/4" Insulation
826062
826087
826112
826137
1" Insulation
Boston , MA
800-645-6155
828087
828112
828137
828162
828212
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
CLIC®-X / Strutcatcher System
• Permits anchoring Clic to strut in shop or on the
ground without cutting into strut.
• For use with Clic No. 15
through No. 113
• Made from Nylon 12 Grilamid
Clic-X with LT-109
Strutcatcher installed
on strut
Mount Clic onto
Strutcatcher with a screw
Be sure to visit
www.GoNefco.com
for the latest Innovative
Products for Strut!
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
#20
100
0.840”
#25
50
1.050”
#32
50
1.315”
#40
25
1.660”
#47
25
1.900”
#59
20
2.375”
#71
25
2.875”
#80
25
3.500”
#113
25
4.500”
#20
100
0.840”
#25
50
1.050”
#32
50
1.315”
#40
25
1.660”
#47
25
1.900”
#59
20
2.375”
#71
25
2.875”
#80
25
3.500”
#113
25
4.500”
Clic Temperature range - 40° to +180°F continuously, and to +225°F
intermittently, with
Copper
Clic Part No.
installation
to Clic
-5°F.Part No.
Nominal Dia.
Tube O.D.
for Copper
for Pipe
1/8
-
-
#10
-
5/16” O.D.
#8
1/4
3/8” O.D.
#10
#12
3/8
1/2” O.D.
#12
#17
1/2
5/8” O.D.
#15
#20
5/8
3/4” O.D.
#17
3/4
7/8” O.D.
#20
#25
1
1-1/8” O.D.
#28
#32
1-1/4
1-3/8” O.D.
#32
#40
1-1/2
1-5/8” O.D.
#40
#47
#51
#59
2
2-1/8” O.D.
2-1/2
2-5/8” O.D.
-
#71
3
3-1/8” O.D.
#71
#80
4
4-1/8” O.D.
-
#113
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
143
Pipe
Hangers
#20
100
0.815”
#25
50
1.029”
#32
50
1.290”
#40
25
1.638”
#47
25
1.883”
#59
20
2.360”
#71
25
2.857”
#80
25
3.475”
#113
25
4.486”
Tools
• Stainless Steel 316 Alloy
• Permits 1/4” threaded rod to mate with
Clic via screw hole in base of Clic
PVC
Abrasives
• For use with Clic #8 through #59
Rigid
OnSite
Supply
LT-101 Flange
Part No.
#17
Qty./Ctn.
100
Conduit O.D. 0.706”
Part No.
#22
Qty./Ctn.
100
Conduit O.D. 0.922”
Part No.
#28
Qty./Ctn.
50
Conduit O.D. 1.163”
Part No.
#36
Qty./Ctn.
50
Conduit O.D. 1.510”
Part No.
#40
Qty./Ctn.
25
Conduit O.D. 1.740”
Part No.
#51
Qty./Ctn.
20
Conduit O.D. 2.197”
Part No.
#71
Qty./Ctn.
25
Conduit O.D. 2.875”
Part No.
#80
Qty./Ctn.
25
Conduit O.D. 3.500”
Part No.
#113
Qty./Ctn.
25
Conduit O.D. 4.500”
IMC
Safety
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
• For use with Clic No. 15
through No. 59
• Made from Nylon PA12
• Recommended for light duty applications
EMT
Rentals
Trade Size
Threaded
Rod
Selection Chart
LT-109-2 Strutcatcher
Twist Strutcatcher 90°
and it locks into place
The One-Piece Automatic Locking
Pipe/Tube/Conduit Support and
Hanger
Insert pipe, tube, conduit or cable into
the open Clic-x, apply slight pressure to
the tubular member and the jaws close
and lock. A sharp “clic” indicates the pipe/
tube/conduit/cable is securely fastened. It’s that simple.
LT-109 Strutcatcher
Insert Strutcatcher
into strut
Clic®-x
Anchors
• Ease of installation
• Non-corrosive
• Work on top of strut
• Cost effective
• Easy change out
• Allows on site
prefabrication
• Non-magnetic
• Work with screw-gun
Strut
Advantages
Fasteners
clic®-X Strutcatcher system
Fasteners
Snap-n-strut™ / EZ-Strut™ Strut Clamps
EZ-Strut™ System Strut Clamps
Anchors
Handy-Snap
(Wall Mounted)
Silencer 257-P
Strut
A strong, sound rated variable
closure clamp. Two acoustical inserts
isolate the pipe from the support
structure, reducing piping noise and
vibration, while allowing normal pipe
expansion and contraction. Clamp
supports up to 1" CTS tubing sizes.
Supports Copper, PEX, CPVC tubing,
conduite, etc. Framework complies
with UL 94V-2 fire rating.
Strut-N-Rod
(Strut Mounted)
(Rod Mounted)
Strut-N-Rod Hanger
Threaded
Rod
Part No.
Description
Box Qty.
257
257-P
w/o Acoustical Silencer
w/ Acoustical Silencer
50
50
Can be snapped into a strut or threaded onto a rod without the use of extra hardware or tools. The pipe is
simply snapped into the hanger and locked in place using
the snug-fit size-adjusting lock arm.
To Order Strut-N-Rod: Add PSNR to end of Part Number
To Order Handy-Snap: Add HS to end of Part Number
Silencer 287-P
Pipe
Hangers
Part
No.
Tools
A strong, sound rated variable closure
clamp. Two acoustical inserts isolate
the pipe from the support structure,
reducing piping noise and vibration,
while allowing normal pipe expansion
and contraction. Clamp supports 1"
to 2" CTS/IPS pipe sizes. Supports
Copper, PEX, CPVC tubing, conduit,
etc. Framework complies with UL
94V-2 fire rating..
Part No.
Description
Box Qty.
287
287-P
w/o Acoustical Silencer
w/ Acoustical Silencer
50
50
Sch.
Rigid
40 & 80 O.D. Conduit EMT
SNS1216
SNS1720
SNS2124
SNS2529
SNS3034
SNS3538
SNS4044
SNS4854
SNS5663
SNS6673
SNS7993
1/4
3/8
1/2
3/4
1
-
1-1/4
1-1/2
2
2-1/2
3
5/8
3/4
7/8
1-1/4
-
1-3/8
1-5/8
2-1/8
-
2-5/8
3-5/8
1/4
3/8
1/2
3/4
1
-
1-1/4
1-1/2
2
2-1/2
3
-
1/2
1/2
-
1
1-1/4
1-1/2
-
2
2-1/2
3
Max.
Load
170
195
215
315
320
342
365
380
410
500
600
Abrasives
CUSH-A-CLAW™ Strut Clamps
O.D. Tube Size
Part
No.
OnSite
Supply
Safety
• Easy, snap-in installation of tube,
pipe or hose.
• Sure-Grip strut base rotates
easily into strut.
• Will not rust, non-conductive.
• Temperature Range: -50° to 275° F.
• For indoor or outdoor use
• Designed for light-duty loads and applications.
• Prevents galvanic corrosion of dissimilar metals.
Rentals
144
Hartford, CT
800-969-0285
Size Range
O.D. Size
Inches
CL06
3/8"
0.375
CL08
1/2"
0.500
CL-10
5/8"
0.625
CL-12
3/4"
0.750
CL-14
7/8"
0.875
CL-18
1-1/8"
1.125
EMT Conduit Size
EMT-1/2
1/2"
0.706
EMT-3/4
3/4"
0.922
EMT-1
1"
1.163
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Standard Jiffy Clips
2-Hole Conduit Straps
Finishes: Pre-Galvanized / Zinc Plated after
Fabrication / Everdur / Stainless Steel
Anchors
Finishes:
Pre-Galvanized Steel / Everdur / Copper Plated
Zinc
120
125
140
150
160
170
121
ED-80
M
MED-90
H-92
H-94
H-95
H-96
H-97
H-98
Marking
on Clip
130-E
145-E
155-E
165-E
1/2"
3/4"
1"
1-1/4"
130
145
1"
1-1/4"
130-C
145-C
155-C
165-C
Part No.
Fits Rigid Marking
Everdur Copper Conduit & Pipe on Clip
120-E
125-E
140-E
150-E
160-E
170-E
120-C
125-C
140-C
150-C
160-C
170-C
1/8"
1/4"
1/2"
3/4"
1"
1-1/4"
120
125
140
150
1"
1-1/4"
Fits BX Cable
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
—
—
—
—
—
—
—
—
Zinc
230
245
255
265
275
285
292
294
Zinc
Part No.
Hot-Dip Everdur
230-G
245-G
255-G
255-G
255-G
255-G
255-G
255-G
230-E
245-E
255-E
—
—
—
—
—
Part No.
Hot-Dip Everdur
225BX
—
225-EBX
225
228
240
250
260
270
280
290
292
294
225-G
228-G
240-G
250-G
260-G
270-G
280-G
290-G
292-G
294-G
225-E
228-E
240-E
250-E
260-E
—
—
—
—
—
Stainless
Fits
EMT
230-SS
245-SS
—
—
—
—
—
—
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
Fits Rigid
Stainless Conduit / Pipe
Fits BX Cable
—
—
240-SS
250-SS
—
—
—
—
—
—
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
Caddy® Pipe Sleeve Positioner
Fig No.
Sleeve Diameter Wall Thickness
740
740
4H58
4H58
4H912
1
1
2
2
2
All Diameter
2”-6”
6”
8”-10”
9”-14”
Philadelphia, PA
610-647-8070
5/16” and under
Schedule #40 Pipe
Schedule #80 Pipe
Schedule #40 Pipe
Schedule #80 Pipe
Washington D.C.
877-419-2755
• Requires only a hammer
to install
• Will accommodate
Schedule #40, #80 and
smaller wall thickness
• Provides secure
positioning of pipe sleeve
for concrete pouring of
wall and floor forms
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Part No.
Threaded
Rod
Fits
EMT Size
Part No.
Everdur Copper
• Two-hole metal straps are designed for use on loads
too heavy to be supported by one-hole Jiffy Clips
Pipe
Hangers
130
145
155
165
—
1
—
—
115
125
750
150
1-1/4"
Tools
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
3/4"
1"
1-1/2"
102-C
103-C
105-C
110-C
115-C
125-C
135-C
150-C
165-C
Abrasives
Zinc
102-E
103-E
105-E
110-E
115-E
125-E
135-E
150-E
165-E
Marking
on Clip
OnSite
Supply
102
103
105
110
115
125
135
150
165
Copper
Tube Size
145
Rentals
Part No.
Everdur Copper
Strut
• These one-hole pipe
straps are ideal for
hanging tubing, pipe,
conduit and BX cable.
Zinc
Fasteners
minerallac® jiffy clips / conduit straps
Fasteners
cable tray systems
Cable Trays - Featuring T.J. Cope and P.W. Industries
Anchors
Legend
1 Straight Section, Ladder (SL)
2 Horizontal Elbow, 90° , Ladder
Type (9F)
3 Horizontal Elbow, 30°, 45° or 60°
(3F, 4F, 6F)
4 Horizontal Cross, Ladder
Type (FC)
5 Horizontal Tee, Ladder Type (FT)
6 Vertical Elbow, Outside, 90° (90)
7 Vertical Elbow, Outside and Inside,
30°, 45°, or 60° (30, 31, 40, 60, 61)
8 Vertical Tee, Solid Bottom Trof
Type (VT)
9 Straight Section, Solid Bottom
Trof (SL)
10 Flanged Solid Cover (FS)
11 Barrier Strip-Straight Section (SB)
12 Barrier Strip-Flexible-Horizontal
Fitting (FB)
13 Straight Section, Cope Channel
(SL)
14 Blind End (BE)
15 Box Connector (BC)
16 Angle Connector (CA)
17 Reducing Connector (CO)
18 Universal Curvilinear Connector
(RC)
Strut
Threaded
Rod
Pipe
Hangers
Typical Cable Tray Layout
Metallic Cable Trays
Cable Tray Specification Checklist
Tools
Abrasives
Cable Tray Details
Materials
• Length - 12’ x 24’
• Width - 6”, 9”, 12”, 18”, 24” 30”
or 36”
• Overall Height - Load depth +
1.25”
• Fittings
• Interconnection pieces to combine
or change direction in either
horizontal or vertical
• Elbows, tees and crosses
• Standard radii curves or 12”, 24”
or 26” with 9” rung spacing
• Aluminum
• Stringers
• Tubing
• Steel
• Mild Carbon Steel
Special Materials
• Stainless Steel
Standard Finishes
• HDGAF
• Mill Galvanize
• PVC
T.J. Cope Ladder Trays
OnSite
Supply
Best Choice
For Most
Applications
• Most Economical
• Most flexible
• Most Common
Horizontal Tee
Vertical Risers
Safety
Rentals
146
Hartford, CT
800-969-0285
Your cable tray specification should be reviewed for every
project. The following items must be included to ensure
the proper installation is made.
• Tray Material
1. Aluminum
2. Pre-Galvanized
3. Hot dip galvanized after
fabrication
4. 304 or 316 stainless
steel
5. Fiber Reinforced Plastic
• Tray Class
1. Cable loads plus
additional loads per
foot; support span;
safety factor
2. Catalog number
3. NEMA Class
• Tray Depth
1. Overall height of side
rail - 4”, 5”, 6” or 7”
2. Loading Depth - 3”, 4”,
5”, or 6”
• Tray Type
1. Ladder - rung spacing
6”, 9” 12” or 18”
2. Trough - solid or
ventilated
Boston , MA
800-645-6155
• Tray Width
1. Ladder - 6”, 9”, 12”,
18”, 24”, 30” 36”, or
42”
2. Trough - 6”, 9”, 12”,
18”, 24”, 30”, or 36”
3. Channel - 3”, 4” or 6”
• Length of Straight Sections
1. 12’ or 24’
• Fittings
1. Radius - 12”, 24”, 36”
or 48”
• Miscellaneous
1. Expansion splice
location
2. Barrier strip
3. Support type - Trapeze
Kit, Center Hung, Wall
Bracket, Hanger Rod
Clamp
Items in bold are typical
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Ventilated Trough Cable Tray
Anchors
Typical Fittings For Tray
• Choice for smaller cables
• Prevents sagging
• Limits access
Solid Bottom Trough
(Not Shown)
• Ideal for multiple number of small
cables
• Used to provide EMI/RFI shields
Straight Length
Adjustable Elbows
90º Vertical Cable
Support Elbow
Horizontal Elbow
45º “Y” Branch
Vertical Tee
Horizontal Tee
Vertical Elbows
Connectors
Horizontal Cross
Covers
Support Methods
Tray Hanger–
Strut
Ventilated Trough
Fasteners
cable tray systems
Part No. 7-HGR1 (Steel)
Part No. 8-HGR1 (Aluminum)
Sold individually
Threaded
Rod
Tray-Hanger–
Pipe
Hangers
T200E Assembly
T201E Assembly
“Flex‑Basket Tray”
Straight sections are available in seven widths: 2”, 4”, 8”, 12”,
16” and 20”. The nominal depth/height for each width is 3” and
stocking 10’ lengths.
The chart was developed to
permit a quick performance check
of continuous beam deflection for
a particular load/span installation.
Applications
• Waste Water
Treatment
• Semi Conductor
• Deionized Water
Facilities
• Chemical
• Petrochemical
• Aquariums
• Pulp and Paper
Philadelphia, PA
610-647-8070
• Utilities
• Plating Facilities
• Marinas
• Theme Parks
• Pharmaceuticals
• OEMs
Washington D.C.
877-419-2755
Tools
Rung Spacing
W
R
in mm Part No.
in mm
6
9
12
18
24
3
6
9
12
18
3
6
9
12
18
3
6
9
12
3
6
9
3
6
9
150
225
300
450
600
Boston , MA
800-645-6155
1153-0321
1113-0321
1123-0321
1133-0321
1143-0321
1153-0322
1113-0322
1123-0322
1133-0322
1143-0322
1153-0323
1113-0323
1123-0323
1133-0323
1153-0324
1113-0324
1123-0324
1153-0325
1113-0325
1123-0325
75
150
225
300
450
75
150
225
300
450
75
150
225
300
75
150
225
75
150
225
Hartford, CT
800-969-0285
• Standard 12’ (3.6 m)
lengths (Canada 3 m
lengths)
• Change fourth digit of
all catalog numbers to
a 6 for 6” (150 mm)
deep tray
• Change fourth digit of
all catalog numbers to
a 4 for 4” (100 mm)
deep tray
• Optional rung caps
available. Catalog
number 0800-0710.
Field installed
Height and width of all
trays indicated in this
catalog shows loading
area - not overall size
of tray.
147
Abrasives
OnSite
Supply
Fiberglass Cable Tray
Rung Width
Safety
Weight
Load Rating Span (lb/ft)
(lb/@10’)
5’ (1.4 m) 6’(2 m)
10’(3 m)
4.8
13.4
5.4
3.4
5.8
19.5
8.1
6.0
9.3
28.9
12.1
7.3
10.3
28.9
12.1
7.3
14.4
36.3
14.4
9.5
20.5
70.5
33.6
18.4
26.7
94.1
43.8
25.2
Rentals
Tray Width
in (mm)
2 (50)
4 (100)
6 (150)
8 (200)
12 (300)
16 (400)
20 (500)
Center Hung Cable Tray - Mono System
Fasteners
cable tray systems
Anchors
YOUR COMPLETE SOURCE
FOR CABLE TRAY
Strut
Threaded
Rod
Pipe
Hangers
We have consistently supplied a broad line of high
quality cable trays to the construction industry for
many years. Typical materials offered are aluminum, fiberglass, mill-galvanized steel, hot-dipped
galvanized steel, stainless steel and PVC coated
trays.
Tools
Ladder cable tray has two longitudinal side members connected by individual transverse members,
designed for use as power cable or control cable
support.
Single Rail, Center-Supported cable tray systems
save time and money in those lighter-duty cable support projects that do not require a traditional dual side
rail cable tray.
Solid Bottom cable tray provides reliable cable support in corrosive applications. Both polyester and vinyl
ester resin systems are available and all components
incorporate U.V. inhibitors and a surfacing veil to resist
corrosive elements.
Abrasives
Channel cable tray consists of a one-piece, ventilated or solid bottom channel section, designed for
use with a single power cable or multiple control or
signal circuit cables.
Fiberglass cable tray provides reliable cable support
in corrosive applications. Both polyester and vinyl ester
resin systems are available and all components incorporate U.V. inhibitors and a surfacing veil to resist corrosive elements.
Trough cable tray consists of a ventilated or solid
bottom contained within longitudinal side members, for use with control and instrumentation
cables.
Wire Mesh cable tray offers double the cable support
area to better support data communication and fiber
optic cabling in addition to saving time and money in
those lighter-duty cable support projects.
OnSite
Supply
Safety
MONO-SYSTEMS INC.
UNIQUE CABLE DISTRIBUTION SYSTEMS
Rentals
148
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
149
Fasteners
Rentals
Safety
OnSite
Supply
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
Strut
Anchors
cable tray systems
Fasteners
Fiberglass strut system
Fiberglass Strut - Channel Framing Materials Selection
Anchors
Heavy Duty Channel
Vinylester
Polyester
(90% Market Share)
•• Premium grade resin
system
•• Price premium
•• Customer driven
•• UV and flame resistant
•• Color coded beige
Strut
•• Good general allpurpose resin system
•• Less expensive than
vinylester
•• Comparable beam
strength to vinylester
•• Polyester is well
acceptable and
understood in the
marketplace
•• UV and flame resistant
•• Color coded gray
Aickenstrut Profile 20P-2000, 20V-2000
• Specify “PCR” pipe
clamps only. Do not use
with metallic pipe clamps
PVC
(Max. Use: 2' Sections)
Threaded
Rod
•• Least expensive channel
offered
•• Light duty applications
•• Not recommended for
excessive beam loading
applications
•• UV and flame resistant
•• Color coded dark gray
Fiberfast Hex Bolts and Hex Nuts
Standard Profiles
Pipe
Hangers
Slotted
20P-2200-SST
20V-2200-SST
With Concrete Inserts
20P-2300-SST
20V-2300-SST
Back-To-Back
20P-2100-SST
20V-2100-SST
Tools
Standard
20P-2000-SST
20V-2000-SST
HEX BOLTS
Part
No.
Size
(in.)
Abrasives
OnSite
Supply
375PU-125
375PU-150
375PU-200
375PU-250
375PU-300
625PU-125
625PU-150
625PU-200
625PU-250
625PU-300
625PU-350
Thread Shank Shoulder Torque
Shear* Shear* Length (ft./lbs.)
3/8 x 1-1/4
3/8 x 1-1/2
3/8 x 2
3/8 x 2-1/2
3/8 x 3
5/8 x 1-1/4
5/8 x 1-1/2
5/8 x 2
5/8 x 2-1/2
5/8 x 3
5/8 x 3-1/2
250
250
250
250
250
700
700
700
700
700
700
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
470 lb.
470 lb.
470 lb.
470 lb.
470 lb.
1,360 lb.
1,360 lb.
1,360 lb.
1,360 lb.
1,360 lb.
1,360 lb.
Full
1/4"
1/2"
3/4"
1"
1/4"
1/4"
1/4"
1/4"
1/4"
1-1/4"
3
3
3
3
3
12
12
12
12
12
12
• Specify “STD” pipe clamps only. May also be used
with metallic pipe clamps
Fiberfast
Flat Washers
*Thread shear values shown represent a 3:1 safety factor
Channel Fittings
20P-2500
20V-2500 (flat)
20P-2800
20V-2800 (grooved)
HEX NUTS
Safety
Part
No.
Size
(in.)
250PU-000
375PU-000
500PU-000
625PU-000
1/4 x 20
3/8 x 16
1/2 x 13
5/8 x 11
Thread
Shear*
Height
(in.)
150 lb.
460 lb.
800 lb.
1,000 lb.
0.218
0.328
0.437
0.546
Torque
(ft./lbs.)
10 (in./lbs.)
3
8
12
*Thread shear values shown represent a 3:1 safety factor
Rentals
150
Hartford, CT
800-969-0285
Part
No.
Size
O.D.
250E-999
375E-999
500E-999
625E-999
750E-999
1000E-999
1/4"
3/8"
1/2"
5/8"
3/4"
1"
0.49"
1.00"
1.25"
1.50"
1.50"
2.25"
Boston , MA
800-645-6155
Call for information on sizes
and types of fittings available
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part
No.
Nominal
Diameter
Max.
Pipe
O.D.
CVHPU-100
CVHPU-150
CVHPU-200
CVHPU-400
CVHPU-600
1/2"
1-1/4"
1-1/2"
2-1/2"
4-1/2"
1"
1-1/2"
2"
4"
6"
Hanger Dimensions
“A”
“B”
“C”
Dim.
Dim.
Dim.
1.500"
2.000"
2.500"
5.125"
6.750"
4.25"
5.14"
6.52"
10.00"
12.33"
1.25"
1.25"
1.25"
1.50"
1.50"
Rod load
(in) (lb)*
Anchors
Molded Clevis Hangers - Fiberglass
1/2 670
1/2 670
1/2 730
1/2 1,150
1/2 1,170
*Design load values shown represent a 3:1 safety factor
STD-050
STD-075
STD-100
STD-125
STD-150
STD-200
STD-250
STD-300
STD-400
STD-600
STD-800
“PCR”
PVC,
Part Nominal Sched. 80
No.
Size Rigid Metal
PCR-050
PCR-075
PCR-100
PCR-125
PCR-150
PCR-200
PCR-250
PCR-300
PCR-400
PCR-600
PCR-800
1/2"
3/4"
1"
Design
FRP
Loads* Bolt
Type 1 Type 2
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
6.625
8.625
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
6"
8"
225
225
225
225
225
225
225
225
300
300
300
90
90
90
90
90
90
90
90
125
125
125
FRP
Bolt
Size (in)
Torque
(ft/lb)
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3/8 x 1-1/4
3
3
3
3
3
3
3
3
3
3
3
Pipe
Hangers
“STD”
Part
No.
Threaded
Rod
Rigid Pipe Clamps - Fiberglass
Strut
Fasteners
fiberglass strut systems
*Design load values shown represent a 3:1 safety factor
200-3827
200-3828
200-3829
200-3830
200-3831
250PU-CN
312PU-CN
375PU-CN
500PU-CN
10PU-CN
12PU-CN
10PU-CNS
Size
(in.)
Torque
(ft./lb.)
1/4-20
5/16-18
3/8-16
1/2-13
10mm
12mm
#10 Screw
Philadelphia, PA
610-647-8070
2
2
3
3
3
3
3
3/8 x 16
1/2 x 13
5/8 x 11
1/2 x 13
1-8
Thread
Shear*
Wt
per ft.
Torque
(ft./lbs.)
470 lb.
570 lb.
1,600 lb.
1,700 lb.
3,000 lb.
0.07
0.12
0.18
0.28
.050
5
10
40
50
60
*Thread shear values shown represent a 3:1 safety factor
• Thread shear - 460
lbs. Represents a 3:1
safety factor.
Rod Couplers - Fiberglass
• Extend stock fiberglass threaded rod
beyond standard lengths
Part
No.
Part
No.
375PU-BC
500PU-BC
Washington D.C.
877-419-2755
Thread Torque
Size (ft./lb.)
3/8"
1/2"
10
10
200-3840
200-3841
200-3842
200-3843
Size
(in.)
3/8 x 16
1/2 x 13
5/8 x 11
3/4 x 10
Thread
Shear*
Length
(in.)
800 lb.
870 lb.
1,500 lb.
1,500 lb.
2-1/4
2-1/4
2-1/4
2-1/4
Safety
Part
No.
Size
(in.)
Abrasives
•• Stock Lengths:
4' & 8'
•• Special lengths
and threads
are available
on request for
excessive beam loading applications
Part
No.
• Thread shear - 460
lbs. Represents a 3:1
safety factor.
Tools
Threaded Rod - Fiberglass
OnSite
Supply
Molded Beam
Clamps Fiberglass
*Thread shear values shown represent a 3:1 safety factor
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
151
Rentals
Standard Duty
Channel Nuts Fiberglass
Fasteners
Non-Metallic Cable Rack
Anchors
CR36
Other Styles of Cable Supports
Strut
RA20
Threaded
Rod
Pipe
Hangers
2” or 3” Saddle Racks U.S.
Pat. No. 228, 737
3” Cable Sling
RA14
Tools
Stock length arms
can be cut on the job to
most any length
Light Duty Adjustable
10” Rack Arm
Abrasives
Without Support
Bracket
120 lb per
Arm
RA08
OnSite
Supply
Ordering Information
Safety
Part Name
Part No.
Standard
Pack Qty.
Standard Pack
lb
cu ft
Rack Vertical Member
Long Arm
Medium Arm
Short Arm
10
10
10
10
37.3
34.9
16.3
11.4
Rentals
152
CR36
RA20
RA14
RA08
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Without Support
Bracket
400 lb per
Arm
1.17
2.45
1.27
.87
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
UDI Wunpeece Duct
Spacers
Standard Unit
ONE-WAY Unit
Horizontal Changing of Sizes and Interlocking
Vertical Interlocking and Size
Changing
Cantilever Support
Gage for Concrete
Unusual Duct Configurations
WUNPEECE CATALOG NUMBERS
4W10
5"
6"
Philadelphia, PA
610-647-8070
3"
2W20
2W30
3W20
3W30
4W15
4W20
4W30
5W15
5W10
5W30
6W20
6W30
Washington D.C.
877-419-2755
Fasteners
• Positioned upright on the outside column, the Wunpeece provides a gage to assure 3" separation from wall of trench.
Boston , MA
800-645-6155
Safety
3"
2"
Hartford, CT
800-969-0285
153
Rentals
2"
4"
Gage for Wall Clearance
Separation
1-1/2"
OnSite
Supply
• Positioned upside down on the top row,
the Wunpeece becomes a 3" gage assuring full concrete cover. This also horizontally interlocks two- or more columns of
ducts where upright positioned spacers
are used to interlock vertically. (See vertical interlocking to the upper left).
• At the right is an example of a "hole in
the middle" arrangement where heat disspation is a concern.
1"
Abrasives
• Either right-side-up or upside down (as
shown) a ONE-WAY of any size can be be
connected to a TWO-WAY of any size in a
cantilever-style of construction
• Turned upright, the Wunpeece allows you
to change sizes and interlock from one
row to the next.
Sizes
• Any combination of duct sizes can be connected together to
interlock the duct bank. Telephone ducts can be kept away
from power by letting one spacer be empty.
Tools
• Standard TWO-WAY unit is easily cut-apart to produce two
ONE-WAY units or assemble into THREE-WAYS, FIVE-WAYS, etc.
Duct
Pipe
Hangers
Threaded
Rod
• Standard TWO-WAY unit saves up to 50% in handling cost over
ONE-WAY Units.
• THREE- FOUR-, FIVE- and SIX-WAY Units available pre-assembled by special order.
• Interlockis any combination of duct sizes,
horizontal and vertically
and all types of Duct,
PVC, Steel and Fiber.
• By using random positioning along the duct
run, Weak areas in the
vertical shear plane in the concrete encasement are eliminated.
• For concrete encasement or direct burial.
Strut
Anchors
Duct Spacers
Fasteners
Stainless Steel Strut / Hangers / Hardware
Stainless Steel Hangers, Strut and Hardware
Specify type of Stainless Steel - 304 or 316
Anchors
Spring (Channel)
Nuts
Strut - Channel
Strut
“Deep” (PS 200)
1 5/8" x 1-5/8" x 12 Gauge
Pipe & Conduit
Clamps
“Rigid”
PS 1100
Standard
Pipe
Clamp
for Rigid
or IMC
“Shallow” (PS 500)
1-5/8" x 13/16" x 14 Gauge
Threaded
Rod
Bolts, Couplings, Nuts and Washers
Threaded Rods
and Studs
1/4” to 1”
Pipe
Hangers
Clevis Hanger
U-Bolt
Riser Clamp
Tools
1/4” - 24”
1/2” - 16”
1/2” - 12”
Abrasives
Post Bases
Drop-In Anchors
Square Washers
Beam Clamps
C-Clamps
OnSite
Supply
Conduit Clips
Safety
Size
1/4-20
3/8-16
1/2-13
Rentals
154
Hartford, CT
800-969-0285
Max.
Load No.
150
750
1100
Boston , MA
800-645-6155
3/8” - 3/4”
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
DBP/DBM-Series - Base Only
Pipe & Equipment Supports
Features
• Dramatically reduces installation time by replacing labor-intensive methods for supporting pipes,
conduits and equipment
• Supports multiple runs of pipe and conduit on roofs
and below raised floors
• Supports concentrated loads up to 600 lbs
• Absorbs shock and vibration
• Protects roof membrane
• Metal cover protects from weather and other environmental conditions
• Features an electro-galvanized finish for corrosion
protection
Part
Fig.
Number No.
PPRPS25H4 1
PPRPS25H6 1
RPS50H4EG 2
RPS50H6EG 2
RPS50AHSV*2
RPS150T1 3
RPS150T2 3
RPS300T1 4
RPS300T2 4
RPS600T2 5
Max.
Working
Load (lbs) Height
25
3-5/8”
25
5-5/8”
50
4”
50
6”
50
2-1/4”
150
3-3/16”
150
4”
300
3-3/16”
300
4”
600
4”
Strut
Threads Finish Included?
–
–
–
–
–
–
–
EG
–
–
EG
–
–
SV
–
3/8”-16 EG
NO
3/8”-16 EG
YES
3/8”-16 EG
NO
3/8”-16 EG
YES
3/8”-16 EG
YES
CADDY® PYRAMID 25
• Supports up to 25 lb loads
• Lightweight, all-plastic construction
weighs less than 1/3 lb
• Has a small 4” x 5” footprint
• UV-Rated
• Handles up to three 1/2” or two
3/4” or 1” pipes/conduit
• No tools or fasteners needed for
installation
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
• Supports up to 150 lb loads
• Has six 3/8”-16 threaded inserts
with captive nuts that allows the
product to be used with standard
pipe clamps and accessories
• Large 16” x 12” footprint distributes load more evenly than alternative methods
• Polyethylene closed-cell foam and
• 14 gauge steel construction
• Electro-galvanized (EG) finish on top
plate for added corrosion protection
Fasteners
Threaded
Rod
Strut
CADDY® PYRAMID 150
Pipe
Hangers
• Supports up to 50 lb loads
• Polyethylene closed-cell foam and
16 gauge steel construction
• The 4” high model has a 10-3/8” x 4”
footprint
• The 6” high model has a 10-3/8” x
4-3/4” footprint
• Electro-galvanized (EG) finish on the
rooftop version and CADDY® COAT
Silver (SV) on the plenum version provide superior corrosion protection
• Metal top designed to shed water
and minimize water collection on
foam base
CADDY® PYRAMID
Tools
CADDY® PYRAMID 50
Abrasives
∙∙
Pipe Supports • HVAC Supports
∙∙ Roof Walkway Supports • Duct
Supports • Conduit Supports
∙∙ Under Floor Applications
∙∙ 5" H x 6" W. 100% UV
resistant recycled rubber.
∙∙ Approved for any type of roofing
material or other flat surfaces.
CADDY® PYRAMID 300
• Supports up to 300 lb loads
• Crosslink polyethylene closedcell foam supports the additional
weight; 14 gauge steel top plate
OnSite
Supply
Base with 14 ga. Galvanized Channel
See Pages 236 - 237
for full details
CADDY® PYRAMID 600
• Consists of two CADDY PYRAMID
300 bases tied together with a
length of strut
• Footprint is 32” x 12” (24” x 16”
optional with cutting of strut) for
more even load distribution
• Supports up to 600 lb loads
Hartford, CT
800-969-0285
155
Safety
DB-Series
∙∙Non-penetrating.
∙∙Extends roof life.
∙∙Dampens vibrations.
∙∙No need for supplemental rubber
pads.
∙∙Will not float.
Rentals
∙∙ 4" H x 6" W x 9.6" L. 100% UV
resistant recycled rubber. Load
capacity: 500 lbs. (uniform load)
∙∙ Approved for any type of roofing
material or other flat surfaces.
Anchors
Caddy® Pyramid / Rooftop Supports
Fasteners
caddy® beam clamps / clips
1/4 Electrical Junior Top
Beam Clamp Malleable Iron
Anchors
Beam Clamps
Caddy Model No. BC2600 25EG
Fig. 1
• Easy installation for beam flanges
1/8” to 5/8
• Supports 1/4” and 3/8” threaded
rod, S-hooks, electrical boxes,
conduit, and bridle rings
100 / box
Fig. 3
Fig. 4
Strut
Sizing Chart
Part
No.
BC
BC812M
BC812MSM
1/4” - 3/8” Steel Beam Clamp
Threaded
Rod
Caddy Model No. BC 200/400 EG
• Ideal For Electrical, Mechanical and
HVAC Applications
• Ideal for creating a threaded rod
trapeze
Part No. Description
Fig
No.
1
3
4
Description
Beam clamp thru
1/2” flange
1/2” to 3/4” conduit to
beam thru 1/2” flange
1/2” to 3/4” conduit to
beam thru 1/2” flange
Static
Qty
Load Limit Per Box
100 lbs.
100
100 lbs.
100
25 lbs.
100
Qty Per Box
BC200 Easy installation for beam flanges 50
Pipe
Hangers
1/8” to 5/8”
Supports 1/4” threaded rod, 1/4”
threaded bridle rings and boxes
Part No. Description
Qty Per Box
BC400 For 3/8” threaded rod or 3/8”-16 25
bolts to beam flange through 3/4”
Tools
Hammer-On
Plain and
Threaded
Rod Hangers
Beam Clamps
Abrasives
Features:
Fig. 1
Fig. 2
OnSite
Supply
• Used to suspend
#8 wire, 1/4”, 3/8”
plain rod or 1/4” or
3/8” threaded rod
from beam flanges
1/8” to 3/4” thick.
• Requires only
hammer to install.
Sizing Chart
Fig. 3
Fig. 4
Safety
Applications
Rentals
156
Hartford, CT
800-969-0285
Part
Fig.
No.
No.
70824 1
70858 1
708912 1
6A24
2
6A58
2
6A912 2
4TI24 3
4TI58 3
4TI912 3
6TI24 3
6TI58 3
6TI912 3
6TA24 4
6TA58 4
6TA912 4
*Nuts required
Flange
Thickness
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
1/8”-1/4
5/16”- 1/2”
9/16”-3/4”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
Boston , MA
800-645-6155
Rod Size
#8 wire or 1/4” Plain Rod
#8 wire or 1/4” Plain Rod
#8 wire or 1/4” Plain Rod
3/8” (Plain)
3/8” (Plain)
3/8” (Plain)
1/4” Threaded
1/4” Threaded
1/4” Threaded
3/8” Threaded
3/8” Threaded
3/8” Threaded
1/4” or 3/8” Threaded*
1/4” or 3/8” Threaded*
1/4” or 3/8” Threaded*
Washington D.C.
877-419-2755
Qty
Per Box
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Philadelphia, PA
610-647-8070
Hammer-On
Flange Clip
Hammer-On
Flange Clip
• Locates a “portable” 1/4”
hole with just a hammer.
• Fits most beams and bulb
tees.
Fig. 1
1/4-20 x 3/8”
screws
P/N S3575BP50
available as
separate item.
Packaged 50 per
box. Weight 1 lb .
per 100.
Strut
Fig. 2
Fig. 2
Applications
Sizing Chart
Flange
Thickness
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
Qty
Per Box
100
100
100
100
100
100
Part
No.
2H4
4H24
4H58
4H912
Multi-Flange
Rod Hanger
Fig.
No.
1
2
2
2
Flange
Thickness
3/32”-9/64”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
Qty
Per Box
100
100
100
100
Static
Load Limit
160 lbs.
200 lbs.
200 lbs.
200 lbs.
Applications
• C or Z Purlins or up to 1/4” (7mm)
horizontal beam flanges.
• Slotted, Hex, Robertson, Phillips combo head bolt.
• Hardened cup point setscrew for secure grip.
• Fast installation of threaded components;
(1/4” or 3/8” ).
• Integrated thread impression eliminates nuts.
• Swivel feature option.
• Electrogalvanized finish for good corrosion
protection.
NOTE:
Loads up to 200 lbs. (0.90 kN) on C or Z purlins or
160 lbs. (0.71 kN) on horizontal beams.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
OnSite
Supply
Features:
Fig. 1
Sizing Chart
Fig. 2
Part
No.
PH4
PH6
PHSW4
PHSW6
Boston , MA
800-645-6155
Fig.
No.
1
1
2
2
Description
Rod
Rod
Rod
Rod
Hanger
Hanger
Hanger w/ swivel
Hanger w/ swivel
Hartford, CT
800-969-0285
Thread
1/4-20
3/8-16
1/4-20
3/8-16
Qty
Per Box
25
25
25
25
157
Safety
Fig.
No.
1
1
1
2
2
2
Rentals
Part
No.
M24
M58
M912
M24S
M58S
M912S
Sizing Chart
Abrasives
Indicated loads are static
load limits and should not
be combined.
Tools
Pipe
Hangers
Applications
Features:
Threaded
Rod
• When used with CADDY® combination
conduit hanger, the conduit run lines up with
“knock-outs” in outlet box and eliminates
offsets and bends.
• Provided with a 1/4-20 thread impression
so that the box may be quickly and securely
attached to the clamp.
• Also available with a staked stud,
1/4-20 x 3/8” to provide easier attachment of
outlet boxes to beams. Eliminates having to
use loose screws.
• The CADDY combination washer-wing nut
(Part No. 4WN) can be used to attach box.
(Not included.)
• New design allows for use with cable ties
Fig. 1
Anchors
Features:
Fasteners
caddy® beam clamps / clips
Fasteners
caddy® stud wall
Screw Gun
Box Bracket
“Colorado Jim”
Cable Support
Anchors
For Between Studs
NEC® Compliance
For Stud
Features
SGB Preset
Strut
Threaded
Rod
Pipe
Hangers
• Can mount multiple 11/2” or 21/8”
deep boxes. Notched and marked for
easy identification and bending.
• Improved design with stamped inch
markings and pilot holes accelerates
precise box and conduit mounting
between studs.
• Pilot holes allow easy box
attachment with a screwdriver.
• Requires only a screw gun to install.
• Reduces movement of the box when
used with flexible conduit, ENT, MC,
AC or ROMEX.®
• Can be mounted on face or inside of
stud.
SGB (Preset)
• Preset for studs 16” or 24” on center.
• Can be preassembled by the contractor to allow for greater production at
the job site.
TSGB (Adjustable)
• Adjustable for non-standard stud
spacing.
• Unique, one-piece, break apart
design.
• Interlocking tab prevents accidental
disassembly.
Applications
Tools
Abrasives
Sizing Chart
Fig. 1
TSGB
Adjustable
OnSite
Supply
Safety
Rentals
Hartford, CT
800-969-0285
CJ6S
Applications
UL & cUL Listed
Positioning Only
Part Cable
Cable
Cables
No. Type
Size
Per Fastener
Non-Metallic
CJ6
14-2, 12-2, 10-2, 14-3 6 Max
to Wood Sheathed Cable 12-3, and 10-3 w/ ground
8-2 and 6-2 w/ ground 4 Max
Box Mounting
Bracket For
Electric Box
No more
time -consuming field
fabrication
with scrap
floor track.
Features:
Box
Depth
1-1/2”
1-1/2”
1-1/2”
1-1/2”
Stud Wall Fasteners.
Call today for complete
listing
• New easy-to-use locking
tab.
• Cable locating ribs to
maintain cable
separation.
• Flared edges for cable
protection.
Sizing Chart
Not listed?
NEFCO stocks other
158
Features
Fig. 2
Minimum of
one mounting
screw required
on each side of
the bracket.
Part
Fig.
Stud
No.
No. Description Spacing
SGB16A† 1
Preset 16” OC
SGB24A†† 1
Preset 24” OC
Adjustable 11” to 18”
TSGB16* 2
TSGB24* 2
Adjustable 17” to 26”
CJ6
or
or
or
or
2-1/8”
2-1/8”
2-1/8”
2-1/8”
• Easily attaches 4” and 411/16”
outlet boxes to metal stud (HS3
switch boxes).
• Support leg reduces movement
of box in wall.
• Can be attached to metal or wood
stud.
• Offset design and use of CADDY®
#SMS8 low profile self-tapping
screws (not included) reduce dry
wall bulge.
• Delivers compliance with:
NEC Article 300.4(d) when used
for 4” and 411/16” outlet boxes to
metal or wood studs.
CEC Rule 12-3012 for 4” and
411/16” outlet boxes to metal or
wood studs.
Applications
Part Fig. Box Stud
No. No. Application Sizes
Depth
H23 1 U.S. 4” sq. & 411/16” 2-1/2” & 3-1/2”
H4 1 U.S. 4” sq. & 411/16” 4”
H6 1 U.S. 4” sq. & 411/16” 6”
HS3 2 U.S. & Canada Switch 2-1/2” & 3-1/2”
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Qty
Per Box
100
50
50
100
Philadelphia, PA
610-647-8070
FBS
CCS812
Anchors
For Between Studs
For Concrete Forms
Features
Fig. 2
• Supports electrical
boxes, plaster rings or low
voltage devices from one
bracket.
• Accommodates up to
four 4” or 411/16” boxes.
• Mounts 11/2” or 21/8”
deep boxes.
• Eliminates the need for
an electrical box on low
voltage applications.
RBS16
Strut
Features
• Supports electrical boxes
from floor
or concrete forms.
• Available in 12”, 16” and
18” heights.
• Slot provides for 8” height
adjustment.
• Use FBS with CCS812 to
support conduits
in concrete pours.
• CCS812 eliminates offset
bending
of conduit.
• CCS812 also works with
TSGB and SGB
Box Mounting
Brackets
Threaded
Rod
Floor Mounted
Box/Conduit
Supports
Fasteners
caddy® stud Wall
Fig. 1
RBS24
Applications
Minimum of one
mounting screw
required on each
side of the bracket.
Sizing Chart
Philadelphia, PA
610-647-8070
Description
12” High box support
16” High box support
18” High box support
1/2” or 3/4” EMT - 1/2” RIGD
Qty
Per Box
50
50
50
100
Washington D.C.
877-419-2755
Part
No.
RBS16
RBS24
Boston , MA
800-645-6155
Description
Mounts up to
boxes/plaster
Mounts up to
boxes/plaster
three 4” or 411/16”
rings 16” bracket
four 4” or 411/16”
rings 24” bracket
Hartford, CT
800-969-0285
Qty
Per Box
25
Safety
Fig.
No.
1
1
1
2
50
159
Rentals
Sizing Chart
Part
No.
FBS12
FBS16
FBS18
CCS812
OnSite
Supply
UL & cUL Listed
Positioning Only
Abrasives
Tools
Pipe
Hangers
Applications
Fasteners
caddy® conduit / cable
Anchors
Features
Flexible Conduit
and Cable Hanger
Conduit
Hangers
WMX
KX
From Flange,
Wire or Plain Rod*
Strut
• Bundle runs* of MC or AC or
communications cables.
• Can be used with flange clips
or deck clip DH2. Also AO or
AB, VF14, AF14, 122-123.
*Refer to local authorities and
NEC Article 310 for derating
ampacity when flexible power
cables are used.
Features
• Supports conduit (EMT, Rigid,
ENT, MC/AC and Aluminum) to
rods* or flanges.
• Can also be used for: flexible
metallic tubing, armored cable,
portable cables, control tubes,
communications cable, etc.
• No installation tools required.
NOTE: May require dedicated
drop wire/rod and EC311
(See Pgs. 34, 45, 190)
– Consult local authority.
*For horizontal application only.
Fig.1
Applications
Fig.2
Threaded
Rod
Applications
KX
The original
“Bat Wings”
in 1959
Pipe
Hangers
“A”
Dia.
Tools
Ultimate static load limit
75 lbs. - WMX6,
50 lbs. - WMX3
Sizing Chart
Part
No.
WMX3
WMX6
Fig
No.
1
2
Number of Runs
of MC/AC Cable
That May Be
Supported
3
6
“A”
Dim.
1-1/8”
1-3/4”
Ultimate
Static
Load
Rating
50 lbs.
75 lbs.
Qty
Per Box
100
100
Abrasives
Flange-Mount
Conduit Clip
Wire Sizes
Qty
#12 #10, #9, #8
Per Box
14-2 (.433-.475 O.D.) KX
KX
100
14-3 (.453-.500 O.D.) KX
KX 100
12-2 (.467-.510 O.D.) KX
KX 100
12-3 (.489-.535 O.D.) KX
K8 100
KX - No load rating - positioning only
Fig 1
Fig. 2
Part No. Part No.
Features
OnSite
Supply
• Available with CADDY®
CONDUIT CLIP bottom mounted Fig. 1
or side mounted.
• Available for 3/8” thru 2” EMT,
rigid and aluminum conduit.
• Requires only hammer and pliers
to install.
• Will pivot thru 360°.
Safety
Applications
Rentals
Sizing Chart
Snap Close
160
Cable
Size
Hartford, CT
800-969-0285
Fig. 2
Description
Qty
Per Box
6M24
6M24SM 3/8” MC/AC cable to 1/8” - 1/4” flanges 100
6M58SM 3/8” MC/AC cable to 5/16” - 1/2” flanges 100
6M58
6M912 6M912SM 3/8” MC/AC cable to 9/16” - 3/4” flanges 100
812M24 812M24SM 1/2” to 3/4” conduit to 1/8” - 1/4” flanges 100
812M58 812M58SM 1/2” to 3/4” conduit to 5/16” - 1/2” flanges 100
812M912 812M912SM 1/2” to 3/4” conduit to 9/16” - 3/4” flanges 100
Hammer-On Flange
Clip
Fig. 1
Part
No.
2H4
4H24
4H58
4H912
Boston , MA
800-645-6155
Fig.
No.
1
2
2
2
Flange
Thickness
3/32”-9/64”
1/8”-1/4”
5/16”-1/2”
9/16”-3/4”
Washington D.C.
877-419-2755
Fig. 2
Qty
Per Box
100
100
100
100
Static
Load Limit
160 lbs.
200 lbs.
200 lbs.
200 lbs.
Philadelphia, PA
610-647-8070
One-Piece
Strut Clamp
SCH Series
Features
Features
• Fast and easy installation –
Installs with screwdriver or nut
driver.
• Accommodates 1/2” thru 4”
EMT or rigid conduit.
• Mounting hole size CD0 thru
CD3 for 1/4” bolt. CD4 thru CD9
for 5/16” bolt.
Available in 3/8” mounting hole
for 1/2” - 2” pipe. To order add
suffix 37 (i.e. CD2B37).
• Retained bolt and built-in nut
means there are less parts to
handle or drop. Bright zinc finish.
• Can be used in locations where
EMT or rigid conduit is used.
• One-piece installation
means no screws or bolts to
drop.
• Installs quickly and easily.
Requires only a screwdriver
or nut driver for installation.
• Heavy-duty construction
with a bright zinc finish.
• Size 3/8” MC/AC to 4” EMT
conduit.
• All sizes available with load
distribution plate attached to
screw.
3/8” Mounting
Hole Available
Applications
Applications
Strut
Fig. 2
Fig. 3
Threaded
Rod
Fig. 2
Fig. 1
Bright Zinc
Finish
See Page 133 for Assemblies (BC200 Series).
CD0B through CD5B are UL & cUL Listed and
meet or exceed UL Test Requirements
Sizing Chart
Sizing Chart
Part
Fig..
No.
No.
CD0B* 1
CD1B* 1
CD2B* 1
CD2.5B* 1
CD3B*
CD4B* 1
CD5B* 1
CD6B 2
CD7B 2
CD8B 2
CD9B 2
Rigid
1/2”
3/4”
1
–
1-1/4”
1-1/2”
2
2-1/2”
3
3-1/2”
4
Conduit
EMT
1/2”
3/4”
1
1-1/4”
1-1/2”
–
2
2-1/2”
3
3-1/2”
4
Universal One-Piece
Strut Clamp
Pipe
Hangers
Also available in stainless steel 302.
Contact ERICO® for price and delivery.
To order add suffix SS (ie. CD2B-SS).
Stainless do not have nutless feature.
Size
Part
No.
Qty
Per Box
100
100
100
100
100
50
50
25
25
10
10
SCH8
SCH12
SCH16
SCH20
SCH6B
SCH8B
SCH12B
SCH16B
SCH20B
SCH24B
SCH32B
SCH40B
SCH48B
SCH56B
SCH64B
SCH72B
SK Series
Fig.
No. EMT
1 1/2”
1 3/4”
1 1”
1 1-1/4”
2 3/8” MC/AC
2 1/2”
2 3/4”
2 1”
2 1-1/4”
2 1-1/2”
2 2”
3 —
3 2-1/2”
3 3”
3 3-1/2”
3 4”
Rigid
Cable
O.D.
Range
Static
Load
Limit
—
—
200
1/2”
—
200
3/4”
—
200
1”
—
200
—
.10” – .63” 200
—
.34” – .71” 200
1/2”
.57” – .92” 200
3/4”
.72” – 1.16” 200
1” 1.00” – 1.51” 200
1-1/4” 1.25” – 1.74” 350
1-1/2” 1.74” – 2.20” 350
2” 2.00” – 2.38” 350
2-1/2” 2.38” – 2.88” 350
3” 2.72” – 3.50” 350
3-1/2” 3.25” – 4.00” 350
4” 3.85” – 4.50” 350
Qty
Per
Box
100
100
100
100
100
100
100
100
100
50
50
25
25
25
10
10
Applications
• One-piece construction.
• Retained bolt and built-in nut
prevents dropping of loose parts.
• One size fits EMT and Rigid.
• Installs with screwdriver,
standard wrench or nut driver.
• Break in half and install.
• Works with most struts.
• Bright zinc finish.
* Aluminum SKs do not have a thread
impression. An aluminum nut and bolt are
provided. Order with no “A” on end for
standard steel bolt and nut.
Philadelphia, PA
610-647-8070
OnSite
Supply
Features
Sizing Chart
Fig. 1
Fig. 2
Washington D.C.
877-419-2755
Part Number
Static Load
Mild
Fig. EMT Mild
Qty
Steel
Aluminum* No. Rigid Steel Aluminum Per Box
SK85I
SK8ALA 1 1/2” 200 150 100
SK125I SK12ALA 1 3/4” 200 150 100
SK165I SK16ALA 1 1” 200 150 100
SK205I SK20ALA 1 11/4” 200 150 100
SK245I SK24ALA 1 11/2” 200 150 50
SK325I SK32ALA 1 2” 200 150 50
SK405I SK40ALA 2 21/2” 350 200 50
SK485I SK48ALA 2 3” 350 200 50
SK565I SK56ALA 2 31/2” 350 200 25
SK645I SK64ALA 2 4” 350 200 25
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Tools
Fig. 1
Anchors
SCH Series
Abrasives
with Bolts
161
Safety
CD Series
Rentals
Conduit
Clamps
Fasteners
caddy® conduit / cable
Fasteners
caddy® conduit / cable
Anchors
Combination
Box/Conduit
Hangers From
Drop Wire/Rod
And Beam
B18 Series
Fig. 1
Features
Fig. 2
Strut
Threaded
Rod
• One riveted assembly.
• No conduit bends
(beam application).
• 66% less Drop Wires
(rod/wire application).
• Delivers with NEC & CEC
compliance, refer to the
2005 CADDY Code Compliance
Book.
NOTE: May require dedicated
drop wire/rod and EC311
(See Pgs. 34, 45, 190)
– Consult local authority.
For single and multiple runs
of conduit.
UL & cUL Listed
Box and Conduit Support
Sizing Chart
Fig. 3
Fig. 4
Fig. 5
Pipe
Hangers
Applications
Fig. 6A
Fig. 6B
Fig. 7
Fig. 8
Part
No.
Tools
Fig.
No.
812MB18 1
812MB186 1
16MB18 1
16MB186 1
6MB18
1
6MB186 1
812MB18A 2
16MB18A 2
6MB18A 2
812MB18S 3
812MB1824 4
812MB1858 4
16MB1824 4
16MB1858 4
6MB1824 4
6MB1858 4
6M4I
6A
812M4I
6A
16M4I
6A
S3575BP50 6B
4WN
7
4TI24
8
4TI58
8
4TI912
8
6TI24
8
6TI58
8
6TI912
8
Description
Qty
Mounts 4” Sq. Boxes With
Per Box
1/2” & 3/4” conduit from #12 wire thru 1/4” rod
25
1/2” & 3/4” conduit to 3/8” plain or threaded rod
25
1” conduit from #12 wire thru 1/4” rod
25
1” conduit to 3/8” plain or threaded rod
25
MC, AC cable from #12 wire
25
thru 1/4” flange
MC, AC cable 3/8” plain or threaded rod
25
1/2” & 3/4” conduit plain center
25
hole for screw or threaded rod mount
1” conduit plain center hole for screw
25
or threaded rod mount
MC, AC cable plain center hole for
25
screw or threaded rod mount
1/2” & 3/4” conduit with
25
1/4-20 x 9/16” stud in center hole
1/2” & 3/4” conduit to 1/8” thru
25
1/4” flange
1/2” & 3/4” conduit to 5/16” thru
25
1/2” flange
1” conduit to 1/8” thru 1/4” flange
25
1” conduit to 5/16” thru 1/2” flange
25
MC, AC cable 1/8” thru 1/4” flange
25
MC, AC cable 5/16” thru 1/2” flange
25
*(XXX)CO 5 Factory riveted assembly for multiple 25
conduit clips. Includes mounting plate and center
conduit clips pre-riveted (additional conduit clips
ordered separately). See Fig. 6A.
14-2 thru 12-3 MC/AC and 3/8” flexible
100
conduit; 1/4”-20 thread impression
1/2” to 3/4” conduit;
100
1/4-20 thread impression
1” conduit; 1/4-20 thread impression
100
1/4 - 20 x 3/8” round head screw
50
1/4”-20 thread impression washer wing nut
100
1/4” threaded rod to 5/16” thru 1/4” flange
100
1/4” threaded rod to 5/16” thru 1/2” flange
100
1/4” threaded rod to 9/16” thru 3/4” flange
100
3/8” threaded rod to 5/16” thru 1/4” flange
100
3/8” threaded rod to 5/16” thru 1/2” flange
100
3/8” threaded rod to 9/16” thru 3/4” flange
100
*To order with B18CO, add the suffix “CO” to any catalog number Figure 1 through
4 above.
Abrasives
RIGID Pipe Clamp
One-Piece
Sizing Chart
Features
OnSite
Supply
• Supports rigid pipe to strut
• Handles heavy loads
• One -piece design incorporates
a retained bolt and built-in nut
• Installs with either a screwdriver
or a nut driver
• Full line is available to fit a
wide range of pipe sizes
• Available in various materials and
finishes
Heavy
Duty
Clamp
Safety
Applications
Rentals
162
Hartford, CT
800-969-0285
Part
No.
RIGD0050XX*
RIGD0075XX*
RIGD0100XX*
RIGD0125XX*
RIGD0150XX*
RIGD0200XX*
RIGD0250XX*
RIGD0300XX*
RIGD0350XX*
RIGD0400XX*
Pipe Size
Load Qty
Nominal O.D. (lbs .) Per Box
1/2”
0.840 400 100
3/4”
1.050 400 100
1”
1.315 600 100
11/4” 1.660 600 100
11/2”
1.900 800 100
2”
2.375 800 100
21/2” 2.875 800 100
3”
3.500 800 100
31/2” 4.000 1000 100
4”
4.500 1000 100
* XX denoted finish available: EG - Electro-Galvanized,
CG - Yellow Chromate,
S4 - Stainless 304, S6 - Stainless 316, HD - Hot Dipped
Galvanized, AL - Aluminum.
Contact ERICO for Copper Applications.
3/8”, 5”, 6”, 8”, 10”, 12” available without one -piece
design, retained combo-head bolt,
or built-in nut.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
512HDEEP Series
512HDEEP with
additional 512HDXT
mounts 21/8” deep box
with 11/2” extension ring.
Applications
Pipe
Hangers
CHB
Applications
CHB can be purchased
separately when more than
one box is required.
Screw furnished
Part
No.
S3575BP50
S102438BP*
512
512TC*
51212
51220
51230
CHB
CHBTC*
512A
512ATC*
Qty
Description
Per Box
1/4 - 20 x 3/8” round head screw
50
10-24 1/2” Rnd Hd Robertson screw 50
Elec tri cal box hanger - 24” span
50
Electrical box hanger - 24” span
50
Electrical box hanger - 12” span
50
Electrical box hanger - 20” span
50
Electrical box hanger - 30” span
50
Box mounting clip
100
Box mounting clip
100
8” height adjustable – 24” span
50
8” height adjustable – 24” span
50
Not to exceed 20 lbs. without independent wire support to CHB.
*For Canadian boxes.
Lay In And Troffer
Light Fixture
Support Clips
For straight
lip fixtures.
515
Features
• Complies with The National Electrical Code, Article 410.16 Means
of Support.
• Gives a positive method of supporting troffers and lay-ins.
• Fits round or rectangular head
tee bar.
• No installation tools required.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Sizing Chart
Ultimate load limit 50 lbs. per bar
Part
Description
No.
512HD‡ Heavy-duty electrical box hanger
with box mounting clip – 24” span
512HDTC* Heavy-duty electrical box hanger
with box mounting clip – 24”
510HD Box mounting clip can be pur chased
separately for multiple box requirements
510HDTC* Box mounting clip can be purchased
separately for multiple box requirements
512HDXT‡ Extension bracket 35/8” height (25 sets)
512HDEEP‡ Heavy-duty electrical box hanger
with extension bracket – 35/8” height
512HDEEPTC* Heavy-duty electrical box hanger
with extension bracket – 35/8” height
Qty.
Per Box
25
25
100
100
50
25
25
*For Canadian boxes. ‡Tall grid compatible.
Sizing Chart
Part
No.
515
515A
Description
Per
Straight lip fixtures
Upturned or straight lip fixtures
Qty.
Box
100
100
Applications
Safety
Sizing Chart
Strut
Threaded
Rod
512HD Series
Standard bar mounts 21/8”
box – break off tabs for
11/2” deep box. Mounts
flush with face of tile.
Tools
512A
• Mounts a box to T-grid
in less than 30 seconds.
• Now height adjustable for
various electrical box depths.
• Installs by hand.
• Drop wire for independent
support from clip and/or bar.
• Screws easily to tee bar for
added stability.
• Multiple box installations.
• Double deep box installations with 512HDXT Extension
Brackets.
• Not permitted for paddle fans.
Abrasives
• Snaps easily onto tee bar.
• Hanger comes complete with box
mounting clip and 1/4-20 screw.
• Supports from acoustical tee bar
as well as main structure with the
use of a drop wire.
• Dual height feature permits 11/2”
deep electrical box to be mounted
flush with tile or off-set 3/4” for
plaster ring.
• 512A is height adjustable up to
8” allowing you to install double
deep boxes, speaker cases and
emergency light fixtures above
acoustical tee.
• Not permitted for paddle fans.
Packaged 50 per box.
One CHB mounting
clip is included with
each No. 512.
Features
For straight
or upturned
lip fixtures.
515A
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
163
Rentals
Features
OnSite
Supply
512
Anchors
510HD Series
One 510HD box mounting
clip is included with each
512HD and 512HDEEP.
T-Grid
Box Hanger
Snap On
Fixture/
Box Hanger
Fasteners
caddy® Acoustical
Fasteners
caddy® Datacomm ITS
CADDY® CABLECAT Capacity Guide
CADDY® CABLECAT
Wide Base Cable Support Clips
Anchors
Sizing Chart
2” Diameter Loops
cULus Listed
Cable Support
Strut
Threaded
Rod
Pipe
Hangers
Part
Fig.
Qty
No.
No. Description
Per Box
Pre-Riveted Factory Assemblies For 2” Diameter Loop
CAT32BC 8 Screw-on 1/8” thru 1/2” flange
40
CAT32BC200 9 Screw-on 1/8” thru 5/8” flange
20
CAT32ESC 10 Easy Strut Clip
40
CAT3224SM 11 Hammer-on 1/8” thru 1/4” flange
40
CAT3258SM 11 Hammer-on 5/16” thru 1/2” flange
40
CAT32912SM 11 Hammer-on 1/2” thru 3/4” flange
40
CAT3224 12 Hammer-on 1/8” thru 1/4” flange – rotates 360º
20
CAT3258 12 Hammer-on 5/16” thru 1/2” flange – rotates 360º
20
CAT32912 12 Hammer-on 1/2” thru 3/4” flange – rotates 360º
20
CAT32VF14 13 1/16” thru 1/4” vertical flange
40
CAT32AF14 14 1/16” thru 1/4” Z purlin
40
CAT324Z34 15 #12 thru 1/4” wire, plain or threaded rod
and 1/8” thru 3/8” flange
40
CAT326Z34 15 3/8” plain or threaded rod and 3/8” thru 9/16” flange 40
CAT32AB 16 Angle Bracket Assembly - 1/4” mounting hole
40
CAT32AFAB3 17 Angle Bracket Assembly - 3/16” mounting hole
40
CAT32AFAB4 17 Angle Bracket Assembly - 1/4” mounting hole
40
CAT32AFAB6 17 Angle Bracket Assembly - 3/8” mounting hole
40
CAT32BCB 18 Screw-on 1/8” thru 1/2” flange rotates 360º
20
CAT32BC200B 19 Screw-on 1/8” thru 5/8” flange rotates 360º
20
CAT32CD1B 21 Under floor support to pedestal
20
Fig. 15
Fig. 17
Tools
Fig. 19
Fig. 8
Fig. 20
Fig. 21
Area Capacity (4-pair)
Part
(sq. in.) Cat. 5e Cat. 6
Number
0.60 16 10
CAT12
2.16 50 32
CAT21
3.17 80 50
CAT32
2 x 1.58 80 50
CAT100CM
15.28 300 185
CAT64
20.43 425 265
CAT425
21.00 500 315
CAT200CMLN
32.00 750 470
CAT300CMLN
32.00 750 470
CATTRAX25
3.14 75 47
CAT600
Abrasives
Best Sellers!
Applications
CADDY® CABLECAT
Adjustable Cable
Support
OnSite
Supply
Features
Sizing Chart
Fig. 1A
Safety
• Up to 425 4-pair UTP or 2-strand
fiber optic cable, or 265 CAT6 - 4”
or 6” dia. loop.
• Provides proper support of Category 5,
fiber optic and innerduct.
• Multiple sizes and designs available
to attach to a variety of structures.
• Cost effective alternative to expensive cable tray.
• Complies with UL®, cUL®, NEC®
Fig. 2
and EIA/TIA requirements for structured cabling systems.
• Suitable for air handling spaces
(plenum).
Fig. 1B
Fig. 4
Fig. 3
Rentals
164
Hartford, CT
800-969-0285
Part
Fig.
No.
No.
Adjustable Cable Support
CAT425WM
1A
CAT425
1B
CAT425A6
1B
Hammer On Flange Clip
CAT42524SM
2
CAT42558SM
2
CAT425912SM
2
Beam Clamp
CAT425BC
3
CAT425BC200
4
Purlin
CAT425AF14
5
CAT425VF14
6
CAT425WMCD1B 7
Boston , MA
800-645-6155
Description
Qty.
Per Box
Wall mount - vertical surface
1/4” Threaded rod or horizontal surface
3/8” Threaded rod or horizontal surface
10
10
10
Hammer-on 1/8” - 1/4” flange
Hammer-on 5/16” - 1/2” flange
Hammer-on 9/16” - 3/4” flange
10
10
10
Screw-on 1/8” - 1/2” flange (rotates 360°) 10
Screw-on 1/8” - 5/8” flange (rotates 360°) 10
Hammer-on 1/16” - 1/4” Z purlin
Hammer-on 1/16” - 1/4” vertical flange
Under floor pedestal
Washington D.C.
877-419-2755
10
10
Philadelphia, PA
610-647-8070
High Speed Hanger Solutions
for HVAC, Mechanical, Lighting
and other Electrical Services
Features
• Simple solution for supporting of
Fig. 1
air duct.
• Accepts wider strap widths up to
11/4”.
• The new clips are made from galvanized steel instead of spring steel.
This expands the use to more applications, especially when used with
other plated parts like our BC200
beam clamp.
Fig. 3
NOTE:
Loads indicated are for
CADDY® Fasteners only.
Fig. 2
Strut
Spiral Duct
Fig. 4
Air Handling Units
Part
No.
MSS24
MSS58
MSS912
MSR24
MSR58
MSR912
MSSBC200
MSRBC200
MSSAFAB3
See page 166 for more GRIPPLE Information
ISN Smart Nut
ISSP Strut Plate
Features
Features
Sizing Chart
Sizing Chart
UPC#
782856
45143
*Order in
45144
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Load
Rating
200#
200#
200#
200#
200#
200#
100#
100#
160#
Qty Per
Box
50
50
50
50
50
50
50
50
50
Applications
• Allows for easy attachment
of strut between existing rods
• Eliminates precise cutting of
strut and the need for multiple
hardware pieces
• For commercial and industrial applications
• Bolt has locking design to
prevent loosening due to
vibration
UPC#
782856
45143
Part
Weight Load
No.
Description Per 100 Rating
ISN375 Smart Nut, 3.1 lbs. 220 lbs.
3/18-16 thread
Flange
Thickness
1/8” to 1/4”
5/16” to 1/2”
9/16” to 3/4”
1/8” to 1/4”
5/16” to 1/2”
9/16” to 3/4”
1/8” to 5/8”
1/8” to 5/8”
Strap hanger
to angle bracket
OnSite
Supply
• Snaps anywhere on 3/8-16
threaded rod
• Adjustable and removable
• Eliminates excessive threading
into place
• Supports plumbing, HVAC,
electrical
• Reduces installation time
• Ideal when rod ends are not accessible or for
retrofit applications
Fig.
No.
1
1
1
2
2
2
3
4
5
Abrasives
Sizing Chart
Part
Qty
Weight Load
No.
DESCRIPTION
Per Box Per 100 Rating
ISSPK
ISN/ISSP Kit
Sets*
10.4 lbs. 220 lbs.
(for 3/8-16 threaded rod)
sets of 12 – 1 set includes (2) ISSP375 and (4) ISN375
ISSP375 Strut Plate Only (No Hardware) 100 36 lbs. –
Boston , MA
800-645-6155
Tools
Improved Galvanized
and Plated Components
for more demanding
environments .
Pipe
Hangers
Fig. 5
Safety
Cable Basket
Threaded
Rod
Applications
Hartford, CT
800-969-0285
165
Rentals
HID Lighting
Anchors
Strap
Hanger Clips
Fasteners
hanging systems
Fasteners
Gripple hanging systems
Anchors
Strut
Threaded
Rod
Pipe
Hangers
GRIPPLE provides nearly unlimited overhead hanging solutions, designed to save both time and money.
Call us or visit www.gripple.com for a complete listing of GRIPPLE Solutions
GRIPPLE Trapeze Fitting for Strut
Tools
Abrasives
OnSite
Supply
Safety
Rentals
166
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Kwic-Locs
Anchors
The RIZE KWIC-LOC cable lock can be used as a fast and reliable way to
suspend fluorescent lighting, HID's, sound systems, cable trays, and fan units.
Cable locks are to be used on static load applications only.
Fasteners
RIZE KWIC-LOC Hanging Systems
Features:
• Zinc Housing: One-piece, die-cast, zinc alloy combines major anti-corrosion
properties with strength.
Strut
• Locking Wedges: An oil impregnated sintered steel locking wedge is seated
in each of two channels. Both wedges incorporate a release pin for easy
adjustment. Each wedge makes contact with the cable using serrated teeth.
These teeth press onto the cable and spread the load across the length of
the wedge, maximizing grip strength.
• Stainless Steel Springs: Assures the initial engagement of the locking
wedge to the wire rope.
KL-200 Kwic-Loc
Threaded
Rod
The largest of the Kwic-Loc Seeries with the highest safe work load limit; perfect
for hanging sound systems and heavy cable tray.
KL-150 Kwic-Loc
Significantly smaller in size and with a lower safe work load limit than the KL-200, the KL-150 may
be used to hang heavy cable baskets and HID lights.
KL-100 Kwic-Loc
Pipe
Hangers
Works on most lighting applications. It can be used to hang fluorescent lights, speakers, busbar
and cable tray to name a few.
KL-50 Kwic-Loc
A solution for lightweight hanging applications. Signs, lighting and gallery displays are the perfect
applications for this size cable lock.
Tools
Cut-Away View of Kwic-Loc
Kwic-Loc Range and Selection Guide
KL-150
KL-100
KL-50
Fluorescent Lights,
Speakers, Busbar,
Cable Tray
Signs, Lighting, Gallery
Displays
Safe Working Load
4:1 Safety Factor
1/8"
25-250 lbs.
25-312 lbs.
3/16"
50-640 lbs.
50-800 lbs.
4 mm
25-180 kg.
25-227 kg.
3/32"
25-150 lbs.
25-187 lbs.
1/8"
25-225 lbs.
25-281 lbs.
2.5 mm
12-100 kg.
12-125 kg.
3.0 mm
12-120 kg.
12-150 kg.
1/16"
0-75 lbs.
0-93 lbs.
3/32"
25-150 lbs.
25-187 lbs.
2.0 mm
12-55 kg.
12-68 kg.
2.5 mm
12-100 kg.
12-125 kg.
1/32"
0-14 lbs.
0-18 lbs.
3/64"
0-46 lbs.
0-57 lbs.
1.2 mm
0-21 kg.
0-26 kg.
Abrasives
Heavy Cable Basket
HID Lights
Safe Working Load
5:1 Safety Factor
OnSite
Supply
KL-200
Sound Systems,
Heavy Cable Tray
Wire Rope Diameter
KL-100SK161
Starter Kit - (1) 500' roll 1/16" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
KL-100SK332
Starter Kit - (1) 500' roll 3/32" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
167
Safety
Typical Applications
Rentals
Kwic-Loc Size
Fasteners
caddy® speed link
Anchors
CADDY® SPEED LINK LD
Universal Support System
Features
Strut
Threaded
Rod
• Ideal in lighting, ductwork, and other installation projects
• Cost-effective alternative to hack chain,
threaded rod, and associated hardware
• Safe working load of 20kg (44 lb)
• Meets the fire rating requirements for DIN
4102-2 for 30 minutes at 30 percent of
rated load
• 5:1 safety factor
• Sleek low-profile locking device reduces
visual impact
• Adjustable after installation
• Available in stainless steel for applications
where a higher level of corrosion resistance
is required
• Works with a variety of CADDY Fasteners
CADDY® SPEED LINK LD
Wire rope diameter: 1.5mm (0.059 inch)
Safe working load: 20kg (44 lb)
Pipe
Hangers
Article Part
No.
No.
195920 SLD15L2
195925 SLD15L5
195930 SLD15L10
195935 SLD15L2S
195940 SLD15L5S
195945 SLD15L10S
Wire Rope
Length
2m (6.6ft) long
5m (16.4ft) long
10m (32.8ft) long
2m (6.6ft) long
5m (16.4ft) long
10m (32.8ft) long
Material
galvanized steel
galvanized steel
galvanized steel
stainless steel
stainless steel
stainless steel
Qty
Per Bag
20
20
20
2
2
2
Tools
CADDY® Toggles
Abrasives
A new universal toggle and Y-toggle for CADDY SPEED LINK LD makes overhead lighting and overhead decking installation even easier. For overhead
decking applications, a universal toggle/wire rope assembly is now available
in 2m (6.6 ft), 5m (16.4 ft), and 10m (32.8 ft) lengths. the part is identical to
standard CADDY SPEED LINK LD, except the hook is replaced with a toggle.
An optional Y-toggle easily hangs lights. It consists of a 500mm (20 in.) or
800mm (31 in.) length of wire repo with a toggle on each end. The center of
the wire rope is looped and crimped.
Part
No.
Description
SLD15Y500 CADDY SPEED LINK Y-Toggle; 500mm (20in) leg length
SLD15Y800 CADDY SPEED LINK Y-Toggle; 800mm (32in) leg length
SLD15L2T CADDY SPEED LINK Y-Toggle; 2m (6.6 ft) long
SLD15L5T CADDY SPEED LINK Y-Toggle; 5m (16.4ft) long
SLD15L10T CADDY SPEED LINK Y-Toggle; 10m (32.8 ft) long
UPC CODE
Weight Per
782856 Box
Box (lbs)
58417
20/bag; 5 bags/box 4.0
58418
20/bag; 5 bags/box 4.5
58419
20/bag; 5 bags/box 8.7
58420
20/bag; 5 bags/box 17.7
58421
20/bag; 5 bags/box 27.7
Weight Per
Box (kg.)
1.8
2.0
4.0
8.0
12.6
OnSite
Supply
CADDY® Speed Link Tools & Accessories
Safety
Article
No.
195851
195852
195853
195859
195860
195861
195863
195854
195856
195858
Part
Number
SLADCP
SLADS
SLWC
SLWPT
SL1214
SL1518
SLLC250
SLEBM6
SLEBM8
SLEBWS
Description
Air Duct Corner Protector
Air Duct Support Attachment
Wire Cutter
Wire Insulation Protection Tube
Cable Clip 12-14mm
Cable Clip 15-18mm
Lighting Clip, 6mm
Eye Bolt M6; 30mm long
Eye Bolt M8; 40mm long
Box
Qty
10
100
1
25 M
100
100
200
100
100
Eye Bolt for Wood, H6; 60mm long 100
Weight Per
Box (lbs)
0.7
1.3
0.7
3.8
1.1
1.2
1.5
3.3
2.5
1.2
Weight Per
Box (kg.)
0.3
0.6
0.3
1.7
0.5
0.6
0.6
0.7
1.4
1.1
SLADS
SLLC250
SLWPT
SL1518, SL1214
Rentals
168
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
SLWC
SLADCP
SLEBWS
Philadelphia, PA
610-647-8070
Strut
Anchors
TECHNICAL SALES DIVISION
Fasteners
Strut Engineered services / technical sales
Engineered Pipe Hanger Support Systems – Turnkey Hanger Systems
• P.E. Stamped Documents and Drawings
• Supports Located on Drawings
• Pipe Stress Analysis (if required)
Cable Tray Systems – Telecom & Datacom Racks
• Medical Equipment Supports
• Pipe Supports
• Material Layout & Take
Off
• Laboratory Supports
• Tray Design
• Ceiling Support Grids
• Tray Supports (Strut
Trapeze & Hardware)
Pipe
Hangers
Strut Grids – Design – Engineering – Installation
Threaded
Rod
• Engineer and Design per Plans and Specifications
• Fabricate and Supply
• Detailed Submittals
• Field Walk-Through & Verification
Seismic Bracing /
Vibration Isolation
Equipment
Abrasives
Pre-Insulated Supports:
Anchors / Slides / Guides
Tools
• Telecom – Datacom
Racks
• Take Offs
• Detailed Submittals
• Stamped Engineering
P.E. Drawings and
Details
• Fabricate and Supply
Flange Bolt Sets
Innerlynx / Linkseal
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
169
Rentals
Safety
Firestopping
OnSite
Supply
• Design and Locate
UNISTRUT
®
New-Innovative Products
Slot Adapter™
Kwik Washer™
Missing Link
Cut-N-Strut™
www.unistrut.com
Fasteners
Strut
Anchors
Quick Reference
Threaded
Rod
Threaded Rod
Threaded Rod
Now
StockingAnchor
Bolts
Williams® H1F Standard coil nuts are
available to match any Williams® coil bars.
Two nuts are recommended for assurance
of a full ultimate strength.
H1F Standard
Bolt Diameter
*S.W.L.
-Pitch
lb/kN
1/2” - 6
3,675 / 16.5
3/4” - 4-1/2
9,000 / 40.0
1” - 3-1/2
18,750 / 83.4
* Working loads based on 2 to 1 safety factor.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Maximum
Working
Safe* Load to Average
Thread Thread
Working Elastic Ultimate
Dia. Pitch
Load Limit
Strength
in
Coil V
lb
lb
lb
(mm) Thd. Thd. (kN)
(kN) (kN)
1/2
6
13NC 9,000 13,000 18,000
(10)
(40.0) (57.8) (80.1)
3/4
4-1/2 10NC 19,000 30,000 38,000
(20)
(84.5) (133.5) (169.0)
1
3-1/2 8NC 37,500 60,000 75,000
(25)
(166.8) (266.8) (333.5)
* Based on approximate 2 to 1 Safety Factor.
Hartford, CT
800-969-0285
171
OnSite
Supply
William® B1S High Tensile
Tie Rods,
B55 Pigtail Anchors, B7S and B8S
Continuous Coil Thread Rod
Safety
Coil Threaded Items
H1F/B25 Coil Hex Nuts
High Tensile Steel
Abrasives
Tools
Pipe
Hangers
178
173
178
178
177
174
173
177
172
173
175
177
Rentals
Anchor Bolts . . . . . . . . . . . . 176 B-7 Rod & Studs . . . . . . . . . 172 Custom Fabrication . . . . . . . 176 Fish Plates . . . . . . . . . . . . . . . . . .
Hook Bolts . . . . . . . . . . . . . 176 Rod Couplings . . . . . . . . . . . . . . . .
Stainless Steel Rod . . . . . . . . . . . .
Studs . . . . . . . . . . . . . . . . . 176 Technical Load Data . . . . . . . . . . .
Threaded Rod . . . . . . . . . . . 172 Threaded Studs . . . . . . . . . . 174 U-Bolts . . . . . . . . . . . . . . . . 176 -
Fasteners
threaded rod
Threaded Rod and Studs
AVAILABLE
ON REQUEST
Materials and Finishes
Anchors
Available in Stainless
Steel and B7
MADE IN THE USA
Studs
Double End Studs End
Tie Rods
•
•
•
•
•
•
•
Carbon Steel
Plain • Zinc Plated
Hot Dip Galvanized
Stainless Steel
Type 304 • Type 316
B7 (ASTM A193)
Coil Thread (ASTM A108)
Strut
Threaded rod in stock 6 ft / 10 ft / 12 ft lengths • Studs cut to any length
Full Size Range - Threaded Rod
Threaded
Rod
* Fine thread and left hand thread available
Pipe
Hangers
Tools
Size
6-32
8-32
1-/24
10-32
1/4 (20)
5/16 (18)
3/8 (16)
7/16 (14)
1/2 (13)
5/8 (11)
3/4 (10)
7/8 (9)
1
(8)
1-1/8 (7)
1-1/4 (7)
1-3/8 (6)
1-1/2 (6)
1-3/4 (2)
2
(4-1/2)
Weight
per
CFT
3.6
5.4
6.9
7.4
12.0
20.0
29.0
40.0
54.0
83.0
125.0
170.0
223.0
281.0
354.0
423.0
512.0
635.0
912.0
3 ft
per Bundle
Pieces ft
Weight
100
300 10.8
100
300 16.2
100
300 20.7
100
300 22.2
100
300 36.6
75
225 44.8
50
150 44.0
25
75
30.2
25
75
41.0
15
45
38.0
10
30
37.1
9
27
46.1
6
18
40.2
4
12
33.8
4
12
42.5
4
12
50.8
4
12
61.5
Bulk
Bulk
6 ft
per Bundle
Pieces ft
Weight
100
600 21.6
100
600 32.4
100
600 41.4
100
600 44.4
100
600 72.0
75
450 90.0
50
300 88.0
25
150 60.3
25
150 82.0
15
90
72.0
10
60
76.0
9
54
92.0
6
36
80.0
4
24
68.0
4
24
84.0
4
24
120.0
4
24
122.0
Bulk
Bulk
Abrasives
Technical Data
Load Chart for Threaded Rod - Low Carbon
OnSite
Supply
Safety
Nominal Rod Diameter
Maximum Safe
Load Pounds 650O
Weight
per ft
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
240
300
730
1350
1810
2710
4480
5900
6230
9500
9000
13800
15700
20700
0.12
0.20
0.30
0.54
0.85
1.20
1.70
2.25
2.80
3.50
4.50
5.00
6.35
9.12
Rentals
172
Hartford, CT
800-969-0285
10 ft
per Bundle
Pieces ft
Weight
N/A
N/A
N/A
N/A
50
500
61
25
250
49.8
25
250
73.3
15
150
60.3
13
130
69.3
8
80
67.5
5
50
61.8
5
50
85.3
3
30
67
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
12 ft
per Bundle
Pieces ft
Weight
N/A
N/A
N/A
N/A
50
600
73.2
25
300
59.7
25
300
87.9
15
180
72.4
13
156
83.2
8
96
81
5
60
74.1
5
60
102.3
3
36
80.4
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Contractor / MRO
1-1/4, 1-1/2 and 1-3/4 are sold in single pieces
of 6, 10 or 12 feet.
2 diameter and larger available on request.
Rod Size
6 ft Plain
Feet per Bundle
10 ft Zinc Plated
12 ft Zinc Plated
1/4-20
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
300
150
72
48
30
24
12
500
250
120
80
50
40
20
600
300
144
96
60
48
24
Rod Coupling
Reducing Rod Coupling
See page 174
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Type 304-316 Stainless Steel
Anchors
304 S/S Part No.
316 S/S Part No.
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
Larger diameters
25C600THRS
37C600THRS
50C600THRS
62C600THRS
75C600THRS
87C600THRS
100C600THRS
112C600THRS
125C600THRS
available upon request
25C600THR3
37C600THR3
50C600THR3
62C600THR3
75C600THR3
87C600THR3
100C600THR3
112C600THR3
125C600THR3
Low Carbon - 10 Foot
ASTM-A193 B7
• 12 ft Lengths
• Sold in single pieces
Plain-Black
Part No.
Zinc Plated
Part No.
Feet per
Bundle
Master Dia.
Bundle
1/4
12500
3/8
6250
1/2
3000
5/8
2000
3/4
1250
7/8
1000
500
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
N/A
37C1000THR
50C1000THR
62C1000THR
75C1000THR
87C1000THR
100C1000THR
112C1000THR
125C1000THR
150C1000THR
175C1000THR
200C1000THR
25C1000THRZ 500
37C1000THRZ 250
50C1000THRZ 120
62C1000THRZ 80
75C1000THRZ 50
87C1000THRZ 40
100C1000THRZ 20
112C1000THRZ
125C1000THRZ
150C1000THRZ
Sold in single
175C1000THRZ
units
200C1000THRZ
Low Carbon - 12 Foot
Plain - Zinc Plated
Dia.
Plain-Black
Part No.
Zinc Plated
Part No.
Feet per
Bundle
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
37C1200THR
50C1200THR
62C1200THR
75C1200THR
87C1200THR
100C1200THR
112C1200THR
125C1200THR
150C1200THR
175C1200THR
25C1200THRZ 300
15000
37C1200THRZ 150
7500
50C1200THRZ 72
3600
62C1200THRZ 48
2400
75C1200THRZ 30
1500
87C1200THRZ 24
1200
100C1200THRZ 12
600
112C1200THRZ
125C1200THRZ
Sold in single
150C1200THRZ
units
175C1200THRZ
Washington D.C.
877-419-2755
Master
Bundle
Part No.
Dia.
Part No.
25C1200THR7
37C1200THR7
50C1200THR7
62C1200THR7
75C1200THR7
87C1200THR7
1
1-1/8
1-1/4
1-1/2
1-3/4
2
100C1200THR7
112C1200THR7
125C1200THR7
150C1200THR7
175C1200THR7
200C1200THR7
Slip-On Lock Nuts
The Slip-On Lock (R) Lock Nut has
been developed with the ability to be
positioned on threaded rod at any point,
without the time consuming nuisance of
threading. Just open the Slip-On Lock Nut
and insert where needed. Twist close and
tighten with a wrench. It’s that simple.
Part No.
Desc.
Federal Stock No.
Rec. Load Rec. Torque for Government
Use
25CSLNZ
37CSLNZ
50CSLNZ
62CSLNZ
75CSLNZ
1/4-20
3/8-16
1/2-13
5/8-11
3/4-10
650
2000
4000
5000
8000
6-8
19-25
50-60
100-120
180-200
Threaded
Rod
Abrasives
Dia.
Philadelphia, PA
610-647-8070
Studs B7 (ASTM A193) In Stock
Pipe
Hangers
Plain - Zinc Plated
Strut
Dia.
1/4 25C600THR 25C600THRZ 25C600THRH 300
7500
3/8 37C600THR 37C600THRZ 37C600THRH 150
3750
1/2 50C600THR 50C600THRZ 50C600THRH 72
1800
5/8 62C600THR 62C600THRZ 62C600THRH 48
1200
3/4 75C600THR 75C600THRZ 75C600THRH 30
750
7/8 87C600THR 87C600THRZ 87C600THRH 24
600
1
100C600THR 100C600THRZ 100C600THRH 12
300
1-1/8 112C600THR 112C600THRZ 112C600THRH
1-1/4 125C600THR 125C600THRZ 125C600THRH
1-1/2 150C600THR 150C600THRZ 150C600THRH
Sold in
1-3/4 175C600THR 175C600THRZ 175C600THRH
single units
2
200C600THR 200C600THRZ 200C600THRH
Tools
Hot Dip Galv Feet/ Master
Part No.
Bundle Bundle
5310-01-264-0918
5310-01-268-5154
5310-01-268-5155
5310-01-268-5156
5310-01-268-5157
OnSite
Supply
Plain-Black Zinc Plated
Dia. Part No.
Part No.
• 6 ft Lengths
• Coarse Thread
• All sizes available in
12 ft lengths
• Sold in single pieces
CADDY SN Series Slip-On Locknuts
No need to thread nut onto rod. Simply open the nut and
insert it on the threaded rod where needed. Then twist to
close and tighten with a wrench.
Part No.
SN25
SN37
SN50
Boston , MA
800-645-6155
SN Series Size / Rod Size
1/4" SN Series Nut
3/8" SN Series Nut
1/2" SN Series Nut
Hartford, CT
800-969-0285
Load Rating
500 lbs.
1350 lbs.
2250 lbs.
173
Safety
Plain - Zinc Plated, H.D.G.
Rentals
Low Carbon - 6 Foot
Fasteners
threaded rod
Fasteners
Rod Couplings
Anchors
Rod Size Length E.G.
Rod Couplings Standard
Strut
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
7/8
1-1/8
1-1/4
2-1/8
2-1/4
2-1/2
2-3/4
3
3-3/4
4
4-1/2
5
25CROCZ
37CROCZ
50CROCZ
62CROCZ
75CROCZ
87CROCZ
100CROCZ
112CROCZ
125CROCZ
150CROCZ
175CROCZ
200CROCZ
ASTM - A193 B7 Studs
In stock
Hot Dip Galv. 304 Stainless Steel
Part No.
Part No.
25CROCH
37CROCH
50CROCH
62CROCH
75CROCH
87CROCH
100CROCH
112CROCH
125CROCH
150CROCH
175CROCH
200CROCH
25CROCS
37CROCS
50CROCS
62CROCS
75CROCS
87CROCS
100CROCS
112CROCS
125CROCS
150CROCS
175CROCS
200CROCS
Threaded
Rod
Rod Couplings Long Length
Rod Size
Length
E.G.
3/8
1/2
5/8
1-3/4
1-3/4
2-3/4
37C175RCLZ/B
50C175RCLZ/B
62C275RCLZ/B
Pipe
Hangers
Rod Couplings Reducing
Rod Size
Tools
Abrasives
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
7/8
1x
E.G.
x 1/4
x 5/16
x 1/4
x 5/16
x 3/8
x 3/8
x 1/2
x 5/8
x 3/4
7/8
37C25RRCZ/B
37C31RRCZ/B
50C25RRCZ/B
50C31RRCZ/B
50C37RRCZ/B
62C37RRCZ/B
62C50RRCZ/B
75C62RRCZ/B
87C25RRCZ/B
100C87RRCZ/B
Heavy Hex Nut
Use with B-7 Studs ASTM A194-2H
OnSite
Supply
Safety
Size
Part No.
Quantity
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4-7
25CTHH/B
31CTHH/B
37CTHH/B
43CTHH/B
50CTHH/B
62CTHH/B
75CTHH/B
87CTHH/B
100CTHH/B
112CTHH/B
125CTHH/B
100
100
100
100
50
25
20
15
10
10
5
Rentals
174
Hartford, CT
800-969-0285
Fully Threaded
(Measured First Thread to First Thread
Per ASTM A193 / A320) • (Standard Stock)
(Stud Bolt)
Rod Size Length E.G.
Rod Size Length E.G.
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1
1
1
1
1
1
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
Boston , MA
800-645-6155
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
7
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
7
8
9
2
2-1/4
2-1/2
2-3/4
3
50C200B7S
50C225B7S
50C250B7S
50C275B7S
50C300B7S
50C325B7S
50C350B7S
50C375B7S
50C400B7S
50C450B7S
50C500B7S
50C550B7S
50C600B7S
62C200B7S
62C225B7S
62C250B7S
62C275B7S
62C300B7S
62C325B7S
62C350B7S
62C375B7S
62C400B7S
62C450B7S
62C500B7S
62C550B7S
62C600B7S
62C700B7S
75C200B7S
75C225B7S
75C250B7S
75C275B7S
75C300B7S
75C325B7S
75C350B7S
75C375B7S
75C400B7S
75C450B7S
75C500B7S
75C550B7S
75C600B7S
75C700B7S
75C800B7S
75C900B7S
87C200B7S
87C225B7S
87C250B7S
87C275B7S
87C300B7S
Washington D.C.
877-419-2755
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
7
8
9
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
7
8
9
10
4
4-1/2
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
5
5-1/2
6
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
87C325B7S
87C350B7S
87C375B7S
87C400B7S
87C450B7S
87C500B7S
87C550B7S
87C600B7S
87C700B7S
87C800B7S
87C900B7S
100C300B7S
100C325B7S
100C350B7S
100C375B7S
100C400B7S
100C450B7S
100C500B7S
100C550B7S
100C600B7S
100C700B7S
100C800B7S
100C900B7S
100C1000B7S
112C400B7S
112C450B7S
112C500B7S
112C550B7S
112C600B7S
112C650B7S
112C700B7S
112C750B7S
112C800B7S
112C850B7S
112C900B7S
112C950B7S
112C1000B7S
125C500B7S
125C550B7S
125C600B7S
125C650B7S
125C700B7S
125C750B7S
125C800B7S
125C850B7S
125C900B7S
125C950B7S
125C1000B7S
Philadelphia, PA
610-647-8070
Stud Manufacturing Service
Types
Reducing
Weld
45° Chisel Point
Strut
Full Thread
Tap End
Radius End
Single End
Unthreaded (Blank)
Chisel Point
Double End
Anchors
Special Orders with 2 - 3 Day Turnaround
All Thread - Single End - Double End - Tap End - Chisel Point - Reduced Body and Machined to Print
Fasteners
Threaded Studs
Materials
17-4 PH** Aluminum Alloys
A193 B16
303
A286**
2024T4
A320 L7
304
Alloy 20
6061T6
A354 BC
304 Strain Hard
Carpenter
A354 BD
304 ELC
20 CB3*** Carbon Steels
SAE GR. 8
309
Nitronic 60**
1018
310
1020 Copper Alloys
316 Nickel Alloys
1117
Copper
316 Strain Hard
Nickel 200
12L14
Brass
316 ELC
Monel 400*
1215
Naval Brass
317 ELC
Monel 405*
A36
Silicon Bronze
321
K-Monel 500*
Zinc Plated
Aluminum Bronze
330
Inconel 600*
Hot-Dip Galvanized
Phosphor Bronze
347
Inconel 601*
Cupro-Nickel
410
Inconel 625*
Alloy Steels
410 Heat Treated
Incoloy 800H*
4140 Hot Dipped
416
Incoloy 825*
4340 Galvanized
430
Hastelloy
A193 B7
440 C
C-276****
A193 B7M
Stocked in House
501 Heat Treated
Tools
Pipe
Hangers
Threaded
Rod
Stainless Steels
Available as Requested
Chemical and Physical Test Reports Available
* Trademark of International Nickel Corporation
** Trademark of Armco Inc
*** Trademark of Carpenter Technology Corporation
**** Trademark of Cabot Corporation
• 304 & 316 S/S
• Plain Steel
• Electro-Galvanized
• B-7
Abrasives
Certification
Measurements
Double-End
Chisel Point
Fully Threaded
Tap End
Reducing
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Safety
(Measured First Thread to First Thread
Per ASTM A193 / A320) • (Standard Stock)
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
175
Rentals
(Measured End to End) • (By request)
OnSite
Supply
Fully Threaded
Fasteners
anchor bolts / hook bolts / u-bolts
Anchors
Threaded Rods and Studs
Strut
The illustrations touch on some of the threading and bending that fab shop at NEFCO can do.
But we don’t stop there.
We can be your one stop shop for threading, bending, welding, sawing, shearing,
power rolling, punching, milling, drilling, painting, galvanizing, plating and flame cutting.
Show us the drawing and we can probably do it.
Call today.
Threaded
Rod
Specializing in “Domestic” Material - Made in U.S.A.
Pipe
Hangers
Tools
Foundation Bolt
Anchor Bolt
(Many Sizes Stocked!)
Foundation Bolt
Special
Hook Bolt
Square Bend
Hook Bolt
Round Bend
Hook Bolt
Special
Abrasives
Specify: Carbon Steel / A193 Grade B-7 / Stainless Steel
OnSite
Supply
Safety
Crane Rail Bolt
Rentals
176
U-Bolt
Round
Hartford, CT
800-969-0285
U-Bolt
Square
Boston , MA
800-645-6155
U-Bolt
Angle
Washington D.C.
877-419-2755
Swaged Bolt
Philadelphia, PA
610-647-8070
Sag Rods
Double End Studs
Threaded Rods
and Studs
Fasteners
Tie Rods
Studs
Pipe
Hangers
Threaded
Rod
Coil Threaded Rods
Strut
Tap End Studs
Anchors
hook bolts / u-bolts / studs
Special
Eye Bolt
Eye Bolt
Closed
J-Bolt
Open
Tools
Hook Bolt
OnSite
Supply
Abrasives
Anchor Bolts for special applications . . .
Safety
...and Anchor Bolt Sleeves for easy installations
Tack-Welding Available – Plain or Hot-Dipped Finishes – Domestic Product Available
Grades 36, 55, 103, F1554 Available
Quick-Turnaround!
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
177
Rentals
Anchor Bolts welded to plates for special needs
Fasteners
ANCHOR BOLTS / CUSTOM FABRICATION
Anchor Bolt Sleeves
Anchor Bolts
Anchors
• Order nuts and washers
separately
• Special sizes available
• Specify dimensions - material
and finish required
Strut
Part No.
Diameter x
Threaded
Rod
Pipe
Hangers
Tools
37C600ABO 3/8
37C800ABO 3/8
37C1000ABO 3/8
37C1200ABO 3/8
50C600ABO 1/2
50C800ABO 1/2
50C1000ABO 1/2
50C1200ABO 1/2
62C800ABO 5/8
62C1000ABO 5/8
62C1200ABO 5/8
62C1600ABO 5/8
62C1800ABO 5/8
75C1200ABO 3/4
75C1500ABO 3/4
75C1600ABO 3/4
75C1800ABO 3/4
75C2000ABO 3/4
75C2400ABO 3/4
75C3000ABO 3/4
100C1800ABO 1
100C2400ABO 1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Anchor Bolt Sleeves provide a grout
pocket around anchor bolts to allow
you to position anchor bolts exactly
where you want them.
Length x
Leg
x
Thread
6
8
10
12
6
8
10
12
8
10
12
16
18
12
15
16
18
20
24
30
18
24
1
1
1
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
3
3
3
3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
6
6
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
• Quick and easy install
• Low cost • Lightweight
• Non-corrosion / Non-conductive
• Grout pockets inherently keep free
of water and dirt
• Bolts cuts its own thread in the top of the polyethylene
sleeve
• No custom pre-fitting required, no welding, forming, pipe
cutting or packing
Series
Bolt Size
Shell Size
Part No.
Quantity
AX
AX
A
A
A
B
B
C
C
D
D
E
E
F
F
1/2
3/4
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
3
4
5
2
2
2
2
2
3
3
4
4
4
4
6
6
6
6
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
100
100
100
100
100
50
50
20
20
20
20
10
10
10
10
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
5
5
7
7
7
10
10
15
15
18
18
24
24
24
24
Custom Fabrication
We offer in-house bending of plate or steel metal, anchor bolts to your
specification and welding per your detailed drawings.
Abrasives
Fish Plates
• For use with cast in place
anchor stud assemblies
OnSite
Supply
Safety
Part No.
Nominal ID
Square
Thick
37DFIP/1/4 x 2 x 2
37DFIP/1/4 x 3 x 3
37DFIP/1/4 x 4 x 4
50DFIP/1/4 x 3 x 3
50DFIP/1/4 x 4 x 4
62DFIP/1/4 x 3 x 3
62DFIP/1/4 x 4 x 4
62DFIP/3/8 x 3 x 3
75DFIP/1/4 x 3 x 3
75DFIP/1/4 x 4 x 4
87DFIP/1/4 x 3 x 3
87DFIP/1/4 x 4 x 4
1DFIP/1/4 x 4 x 4
3/8
3/8
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
2
3
4
3
4
3
4
3
3
4
3
4
4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
1/4
1/4
1/4
1/4
1/4
Rentals
178
Hartford, CT
800-969-0285
We are your:
for
• Threading
• Bending
• Welding
• Sawing
Boston , MA
800-645-6155
• Punching
• Milling
• Drilling
• Painting
Washington D.C.
877-419-2755
• Shearing
• Power Rolling
• Galvanizing
• Flame Cutting
Philadelphia, PA
610-647-8070
Fasteners
Strut
Anchors
Quick Reference
Plumbing / Sprinkler Hangers
Copper Bell Hanger (Van) . . 219
Copper Natick Hanger . . . . . 219
Emlok Sprinkler Ring . . . . . . 221
Holdrite . . . . . . . . . . . 214 - 216
Nail Plates . . . . . . . . . . . . . 213
Split Ring Hangers . . . . . . . . 217
Sumner . . . . . . . . . . . . . . . . 213
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Caddy Speed Link . . . . . . . . 235
Gripple Hanging System 232 - 233
Innerlynx Link Seals . . . 210 - 211
Klo-Shure . . . . . . . . . . . . . . 212
Rooftop Supports
. . . . . . . . .198 - 199, 236 - 242
Pipe Flashing / Dektite . . . . . 244
Pre-Insulated Shields /
Supports . . . . . . . 200 - 201, 204
Rize Kwic-Loc . . . . . . . . . . . 234
Sleeves - Wall / Floor 209, 231
Slides / Guides / Anchors 202 - 203
Steel Sections . . . . . . . . . . . 208
Underground Clamps . . . . . . 243
Wire Hanging Systems . 232 - 235
Pipe
Hangers
Tools
Specialty Products
Abrasives
SAMMY SUPER SCREW
Bang-ItTM / Wood-KnockerTM . 220
Concrete Attachments . . . . . 199
Drop In Anchors . . . . . . . . . 221
Hanger Hardware . . . . 217 - 219
Hollow Set Drop In Anchor . 220
Metal Deck Ceiling Bolts . . . 199
Sammy Super Screw . . 222 - 225
T-Head Bolts . . . . . . . . . . . . 243
U-Bolt . . . . . . . . . . . . . . . . . 218
Vertigo Fastening System . . . 225
OnSite
Supply
Standard Hangers
Adjustable Pipe Roll Stand . . 193
Beam Clamps 188-189, 196-197
Brackets . . . . . . . . . . . . . . . 207
C-Clamps . . . . . . . . . . . . . . . 188
Clevis Hanger . . . . . . . 186 - 187
Clevis Hanger with
Welded Shield . . . . . . . . . . . 187
Double Rod Roller Hanger . . 190
Pipe Clamps . . . . . . . . . . . . 198
Pipe Shields . . . . . . . . . . . . 186
Pipe Insulation Protection
Saddles . . . . . . . . . . . . . . . . 191
Pipe Roll Stand . . . . . . . . . . 192
Pipe Saddle Supports 194 - 195
Retaining Straps
for Beam Clamps . . . . . 188 - 189
Riser Clamps . . . . . . . . . . . . 185
Roller Chair . . . . . . . . . . . . . 191
Single Rod Roller Hanger . . . 190
V-Clevis / V-Trough . . . . . . . . 185
Weld Beam Attachment . . . . 197
Hanger Hardware
Seismic Bracing /
Vibration Isolation
Tolco Seismic . . . . . . . 226 - 229
Vibration Isolation
Products . . . . . . . 204, 207, 230
Wire Rope . . . . . . . . . . 189, 229
Hartford, CT
800-969-0285
179
Safety
Pipe Hangers Quick
Reference . . . . . . 180-184
Strut Quick
Reference . . . . . . . . . . 184
Rentals
VERTIGO
™
Threaded
Rod
Pipe Hangers
Fasteners
pipe hangers quick reference
Beam Clamps
Anchors
Page 188
Page 189
Page 188
Steel C-Clamp
Z-Purlin Beam Clamp
Jr. Top Beam
Page 188
Wide Mouth Top Beam
Strut
Steel C-Clamp with Locknut
Threaded
Rod
Page 196
Page 196
Page 196
Page 196
Page 197
Adjustable Beam
Clamp
Steel Beam
Clamp
Center Load
Malleable Iron
Beam Clamp
("Ice Tong")
UFS Forged Steel
Beam Clamp
Beam Clamp
Pipe
Hangers
Page 188-189
Page 189
Page 196
Retaining Strap
Retaining Strap
Side Beam Clamp
Tools
Pipe Hangers
Abrasives
Page 218
Page 186
Page 187
Page 187
Page 185
Page 185
Adjustable
“J” Hanger
Standard Clevis
Hanger
Light Duty Clevis Hanger
AWWA "Cast-Iron"
Clevis Hanger
Vee Bottom
Clevis Hanger
Plastic Pipe
Support Channel
"V-Trough"
Copper Tubing
Clevis Hanger
OnSite
Supply
Safety
Page 187
Page 185
Page 221
Page 221
Page 187
Page 217
Elongated Clevis
Hanger
Flat Top Clevis
Hanger
Adjustable Swivel Ring
Emlok Sprinkler
(NFPA Rod Sizes)
Copper Tubing
Adjustable
Swivel Ring
A-Band
Adjustable Band
Hanger
Hinged Extension Split
Pipe Clamp
Page 187
Rentals
Copper Tubing
Adjustable Band
Hanger
180
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Page 217
Copper Tubing Hinged
Extension Split Pipe
Clamp
Philadelphia, PA
610-647-8070
Page 217
Page 218
Page 218
Page 207, 230
Extension Split
Pipe Clamp
Offset ‘J’ Hook
Straight ‘J’ Hook
Light Duty Spring
Hanger
Page 217
Page 207, 204
Page 165
Page 165
Page 217
Spring Cushion
Hanger
Parallel Strap Hanger
Right Angle Strap
Hanger
Hanger
Pipe
Hangers
Threaded
Rod
Copper Tubing
Extension Split Pipe
Clamp
Strut
Anchors
Pipe Hangers - Continued
Fasteners
pipe hangers quick reference
Page 185
Page 243
Page 198
Page 243
Standard Riser
Clamp
Two-Bolt
Underground
Clamp
Standard Pipe Clamp
Lug Washer
Page 185
Page 198
Abrasives
Tools
Pipe Clamps
Heavy Duty Pipe
Clamp
Page 217
Page 198
Page 198
Page 198
Page 218
Washer
"Fish Plate"
Double Bolt Pipe Clamp
Offset Pipe
Clamp
Marine Hanger
"2-Hole" Short
Pipe Strap
Page 198
Safety
OnSite
Supply
Copper Tubing
Riser Clamp
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
181
Rentals
Heavy Duty Double Bolt
Pipe Clamp
Fasteners
pipe hangers quick reference
Pipe Rollers & Roller Supports
Anchors
Strut
Page 190
Page 191
Page 191
Page 190
Adjustable Steel
Yoke Pipe Roll
(Single Rod)
Roller Chair
Roller Strut
Pipe Roll with
Sockets
(Double Rod)
Adjustable
Roller Support
Threaded
Rod
Page 137
Page 137
Page 137
Page 137
Page 192
Page 193
Pipe Rollers for
Strut
Pipe Rollers for
Strut
Pipe Rollers for
Strut
Pipe Rollers for
Strut
Steel Roller Stand
Adjustable Roller Stand
with Base Plate
Pipe
Hangers
Pipe Supports, Guides, Shields and Saddles
Tools
Page 195
Page 195
Page 195
Page 195
Page 195
Threaded Base
Stand
Pipe Support
Adjuster
Pipe Saddle
Support with
U-Bolt
Pipe Saddle
Support
Pipe Saddle
Support
Page 195
Page 194
Page 194, 195
Page 203
Adjustable Pipe
Saddle Support
Adjustable Pipe
Saddle Support
with Yoke
Adjustable Pipe
Saddle Support
Pipe Alignment
Guide
Abrasives
Page 195
Base Stand
OnSite
Supply
Safety
Rentals
182
Page 202, 203
Page 186
Page 186
Page 191
Pipe Slides
Insulation
Protection Shield
360° Insulation
Protection Shield
Pipe Covering
Protection
Saddle
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Concrete Inserts
Fasteners
pipe hangers quick reference
Page 199
Page 199
Page 199
Adjustable Metal
Deck Ceiling Bolt
Light Duty Spot
Concrete Insert
Steel Insert Nut
Malleable Iron
Insert Nut
Page 199
Page 133
Page 160
Page 160
Fastener Clip
Fastener Clip
Malleable Iron
Concrete Insert
Spot Insert
Threaded
Rod
Strut
Page 199
Page 207
Page 207
Page 207
Page 207
Light Welded
Steel Bracket
Adjustable Strut
Bracket
Light Duty
Bracket
Medium Duty Angle Bracket
Tools
Pipe
Hangers
Brackets
Page 207
Heavy Duty Angle Bracket
Abrasives
Upper Attachments
Philadelphia, PA
610-647-8070
Page 217
Side Beam
Connector
Side Beam
Angle Clip
Page 199
Page 199
Page 199
Rod Attachment
Concrete Plate
Clevis Concrete
Plate
Single Lug
Concrete Plate
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Page 197
OnSite
Supply
Page 217
Welded Beam
Attachment
Hartford, CT
800-969-0285
Safety
Ceiling Flange
F & M Plate
183
Rentals
Page 217
Fasteners
pipe hangers / Strut quick reference
Threaded Attachments
Anchors
Page 218
Page 219
Page 219
Page 219
Page 219
Page 219
Standard U-Bolt
Eye Socket
Weldless Eye
Nut
Forged Steel
Clevis
Extension
Piece
Turnbuckle
Page 218
Strut
Light Duty U-Bolt
Threaded
Rod
Page 219
Page 176
Page 217
Page 217
Eye Rod
J-Bolt
Coach Screw
Rod
Drive Screw
Page 219
Page 219
Page 219
Page 217
Steel Rod Coupling Malleable Iron
Rod Coupling
Page 219
Steel Washer
Plate
Steel Reducer
Rod Coupling
Welded Eye Rod
Strut and Strut Accessories
Pipe
Hangers
12 Gauge
1-5/8” x 1”
Angle Fitting
12 Gauge
Tools
1-5/8” x 1-5/8”
Channel Spring
Nut Short
12 Gauge
1-5/8” x 2-7/16”
Angle Fitting
Continuous
Concrete Insert
Abrasives
14 Gauge
Top Spring Channel Nut for
All Channels
1-5/8” x 1-5/8”
Square Channel
Washers
OnSite
Supply
12 Gauge
12 Gauge
1-5/8” x 1-3/8”
1-5/8” x 3-1/4”
Copper Tubing
Strut Clamp
Channel Nut
Channel Nut Short
12 Gauge
Flat Fitting
Pipe Strut Clamp
Angle Fitting
Channel Spring Nut
1-5/8” x 13/16”
Safety
14 Gauge
1-5/8” x 13/16”
Welded Back to Back
Rooftop Support Blocks
See Pages 236-242
Rentals
See Full Strut Section Page 125-169.
184
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anvil Model No. 261
Part No.
Black
Part No.
E.G.
Part No.
Copper
Pipe
Size
A
Size
Stock
Size
Bolts
Wt./Each
Approx.
Max. Rec.
Load, lb
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
75DRIC
100DRIC
125DRIC
150DRIC
200DRIC
250DRIC
300DRIC
350DRIC
400DRIC
500DRIC
600DRIC
800DRIC
10IRIC
12IRIC
14IRIC
16IRIC
18IRIC
20IRIC
24IRIC
75DRICZ
100DRICZ
125DRICZ
150DRICZ
200DRICZ
250DRICZ
300DRICZ
350DRICZ
400DRICZ
500DRICZ
600DRICZ
800DRICZ
10DRICZ
12DRICZ
14DRICZ
16DRICZ
18DRICZ
20DRICZ
24DRICZ
75DRICK
100DRICK
125DRICK
150DRICK
200DRICK
250DRICK
300DRICK
350DRICK
400DRICK
500DRICK
600DRICK
800DRICK
10IRICK
12IRICK
14IRICK
16IRICK
18IRICK
20IRICK
24IRICK
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
3/16 x 1
3/16 x 1
3/16 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1-1/2
1/4 x 1-1/2
3/8 x 1-1/2
3/8 x 2
1/2 x 2
1/2 x 2
5/8 x 2-1/2
5/8 x 2-1/2
5/8 x 2-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
1/2 x 1-1/2
1/2 x 1-1/2
1/2 x 1-3/4
1/2 x 1-3/4
5/8 x 2-1/2
5/8 x 2-1/2
5/8 x 2-1/2
5/8 x 2-1/2
3/4 x 3
3/4 x 3
3/4 x 3
1.01
1.06
1.07
1.12
1.20
1.25
1.67
1.81
2.12
2.22
3.44
3.65
7.24
11.11
15.82
16.75
30.34
31.84
34.31
220
220
220
250
250
300
400
500
600
750
1500
1600
2500
2500
2700
2700
2900
2900
2900
CE
Tools
Part No.
Black
INVCH/EMP
2NVCH/EMP
Size
Pipe
A
D
Size
Rod Size B
C
Adjust.
No.
E
Rod
Takeout
F
Steel
Size
G
Steel
Size
H
Max.
Recom.
Load/lb
Wt.
per
C
1
1
2
3-7/8
3-3/4
3-5/8
3-3/8
3-1/4
2-7/8
5-1/2
5
4-1/4
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
1/8 x 1-1/8
1/8 x 1-1/8
1/8 x 1-1/8
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
3/4 x 13 ga
1/8 x 1-1/8
1/8 x 1-1/8
1/8 x 1-1/8
150
150
150
150
150
150
250
250
250
30
30
30
30
30
30
115
115
115
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5-3/8
5-3/8
5-3/8
5-3/8
5-3/8
5-3/8
8-3/8
8-3/8
8-3/8
4-3/8
4-1/4
4-1/16
3-7/8
3-11/16
3-5/16
6
5-1/2
4-3/4
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
V-Trough
Pipe Size Size Angle Size
Flat Top
Clevis Hanger
Part No.
Black
1-1/2 - 1-1/2 1NVTR
3 - 3
2NVTR
A
Channel No.
Pipe Size
Length
B
1
2
1/2 to 2
2-1/2 to 4
Philadelphia, PA
610-647-8070
8’0”
8’0”
1-1/2
3
Washington D.C.
877-419-2755
C
Steel
Thickness
Max. Recom.
Load per
Length
Wt.
per C
1/8
18 ga
150
250
400
800
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
1/2 - 2
1
2-1/4 - 4 2
3/16
3/16
3/16
3/16
3/16
3/16
3/8
3/8
3/8
Abrasives
3/8
1/2
1
2
H
OnSite
Supply
1/2 - 2
2-1/4 - 4
V-Clevis
Plastic Pipe Hanger
185
Rentals
Pipe Size Size Rod
Threaded
Rod
* Also available in stainless steel. See price list for ordering information.
Underwriters Laboratories Approved 2” - 8”.
Pipe
Hangers
9-1/8
9-1/4
9-5/8
9-7/8
10
10-1/2
11-1/16
11-13/16
13
13-1/2
14
15-3/16
19
22
22-1/2
23-3/4
27-1/2
28-1/2
30-1/4
Strut
Size
Fasteners
Riser Clamps
Other Finishes / Materials Available
• ZP • P • HDG • SS
Anchors
Riser Clamps / V-Clevis
Fasteners
Clevis hangers / pipe shields
Clevis Hangers
Pipe Shields
For Insulation Protection
Anvil Model No. 260
Anchors
Anvil Model No. 167
Other Finishes / Materials Available
• EG • P • HDG • SS • PVC
Strut
Threaded
Rod
Pipe
Hangers
Tools
Pipe Size Rod Size
Plated
Part No.
Black
Part No.
Copper
Part No.
Zinc
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
7
8
10
12
14
16
18
20
24
30
50DCLH
75DCLH
100DCLH
125DCLH
150DCLH
200DCLH
250DCLH
300DCLH
350DCLH
400DCLH
500DCLH
600DCLH
700DCLH
800DCLH
10ICLH
12ICLH
14ICLH
16ICLH
18ICLH
20ICLH
24ICLH
30ICLH
50DCLHK
75DCLHK
100DCLHK
125DCLHK
150DCLHK
200DCLHK
250DCLHK
300DCLHK
350DCLHK
400DCLHK
500DCLHK
600DCLHK
700DCLHK
800DCLHK
10ICLHK
12ICLHK
14ICLHK
16ICLHK
18ICLHK
20ICLHK
24ICLHK
30ICLHK
50DCLHZ
75DCLHZ
100DCLHZ
125DCLHZ
150DCLHZ
200DCLHZ
250DCLHZ
300DCLHZ
350DCLHZ
400DCLHZ
500DCLHZ
600DCLHZ
700DCLHZ
800DCLHZ
10ICLHZ
12ICLHZ
14ICLHZ
16ICLHZ
18ICLHZ
20ICLHZ
24ICLHZ
30ICLHZ
Abrasives
OnSite
Supply
Safety
Pipe
Size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
9
8
10
12
14
16
18
20
24
30
Rentals
186
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1
1-1/4
1-1/4
1-1/4
Hanger Size
Part No.
10” Long
Part No.
12” Long
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
150DPSH
200DPSH
250DPSH
300DPSH
350DPSH
400DPSH
500DPSH
600DPSH
800DPSH
10IPSH
12IPSH
14IPSH
Call
150DPSH/12
200DPSH/12
250DPSH/12
300DPSH/12
350DPSH/12
400DPSH/12
500DPSH/12
600DPSH/12
800DPSH/12
10IPSH/12
12IPSH/12
14IPSH/12
16IPSH/12
18IPSH/12
for
proper sizing
Note: All shields are pre-galvanized carbon steel.
Order shields to match hanger size to be used.
Size of Steel
Wt.
Max. Rec.
Upper
Lower
A
B
C
D
E
F
per 100 Load lb*
16 ga x 7/8
3/8
16 ga x 7/8
1-11/16 2-1/8 2-1/2 7/8
7/16
30
610
16 ga x 7/8
3/8
16 ga x 7/8
1-7/8 2-7/16 2-1/2 1
1/2
32
610
16 ga x 7/8
16 ga x 7/8
3/8
2-1/8 2-13/16 2-1/2 1-1/4
5/8
36
610
16 ga x 7/8
16 ga x 7/8
3/8
2-9/16 3-7/16 2-1/2 1-3/4
7/8
42
610
13 ga x 7/8
3/8
13 ga x 7/8
3
4
2-1/2 2-1/8
1-1/16 55
610
13 ga x 7/8
3/8
13 ga x 7/8
3-11/16 4-7/8 2-1/2 2-15/16 1-5/8 60
610
10 ga x 1-3/16 11 ga x 1-3/16 1/2
4-11/16 6-1/8 3
3-13/16 2
115
1130
10 ga x 1-3/16 11 ga x 1-3/16 1/2
4-3/4 6-9/16 3
3-7/8
1-3/4 132
1130
9 ga x 1-3/16 11 ga x 1-3/16 1/2
4-15/16 6-15/16 3
4-1/16 1-3/4 156
1130
9 ga x 1-3/16 11 ga x 1-3/16 5/8
5-9/16 7-13/16 3-1/2 4-1/2
1-15/16 190
1430
4 ga x 1-1/4 8 ga x 1-1/4 5/8
6-3/16 9
3-1/2 5-1/8
1-3/4 240
1430
3 ga x 1-1/2 8 ga x 1-1/2 3/4
6-13/16 10-1/8 4
5-5/8
1-7/8 320
1940
3 ga x 1-3/4 8 ga x 1-3/4 3/4
8-1/2 12-1/8 4-1/4 6-1/2
2-1/4 450
2000
3 ga x 1-3/4 8 ga x 1-3/4 7/8
8-5/16 12-5/8 4-1/4 7
2-1/8 500
2000
3 ga x 1-3/4 7/8
3/8 x 1-3/4
9-7/8 15-1/4 4-1/2 8-3/8
2-1/4 860
3600
3/8 x 2
3 ga x 2
7/8
11-3/16 17-9/16 4-3/4 9-3/4
2-5/8 1040 3800
1/2 x 2-1/2
3 ga x 2 1/2 1
12-7/16 19-7/16 5-1/4 10-13/16 2-15/16 1280 4200
3 ga x 2-1/2 1
1/2 x 2-1/2
15
23
6
12-7/16 2-5/8 1960 4600
1/2 x 2-1/2
3 ga x 2-1/2 1-1/8
15-1/4 24-1/4 6-1/2 13-15/16 3-3/4 2420 4800
3/8 x 3
1-1/4
5/8 x 3
16-3/4 26-3/4 7
13-15/16 4
4225 4800
5/8 x 3
3/8 x 3
1-1/4
19
31
7-1/2 17-1/2 4-1/4 4600 4800
3/4 x 3
3/8 x 3
1-1/4
24-1/8 39-1/8 8-1/4 21-7/8 5
6950 6000
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Legend Pipe Hangers
Material or Finishes
B = Black
EG = Electro
Galvanized
or Zinc Plated
P = Painted
HDG = Hot Dip
Galvanized
PVC = P.V.C. Coated
K = Copper
SS = Stainless Steel
Philadelphia, PA
610-647-8070
Other Finishes / Materials Available
• P • HDG
Shield
(in)
Part No.
Black
Part No.
Zinc Plated
Hanger
Size
Shield
(in)
Part No.
Black
Part No.
Zinc Plated
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
10
10
10
10
10
10
10
10
10
10
10
10
10
10
150DCWS
200DCWS
250DCWS
300DCWS
350DCWS
400DCWS
500DCWS
600DCWS
800DCWS
10ICWS
12ICWS
14ICWS
16ICWS
18ICWS
150DCWSZ
200DCWSZ
250DCWSZ
300DCWSZ
350DCWSZ
400DCWSZ
500DCWSZ
600DCWSZ
800DCWSZ
10ICWSZ
12ICWSZ
14ICWSZ
16ICWSZ
18ICWSZ
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
12
12
12
12
12
12
12
12
12
12
12
12
12
12
150DCWS/12L
200DCWS/12L
250DCWS/12L
300DCWS/12L
350DCWS/12L
400DCWS/12L
500DCWS/12L
600DCWS/12L
800DCWS/12L
10ICWS/12L
12ICWS/12L
14ICWS/12L
16ICWS/12L
18ICWS/12L
150DCWSZ/12L
200DCWSZ/12L
250DCWSZ/12L
300DCWSZ/12L
350DCWSZ/12L
400DCWSZ/12L
500DCWSZ/12L
600DCWSZ/12L
800DCWSZ/12L
10ICWSZ/12L
12ICWSZ/12L
14ICWSZ/12L
16ICWSZ/12L
18ICWSZ/12L
Pipe
Hangers
Hanger
Size
“Elongated” Clevis Hanger
Clevis Hanger
Anvil Model No. 300
For AWWA Cast Iron Pipe
Sizes available 1/4” thru 12”
• B • P • E.G. • HDG • SS
Tools
Sizes available 3” thru 24”
• B • P • E.G • HDG • SS
Abrasives
A-Band Hanger
Light Duty Clevis Hangers
Anvil Model No. 65
Other Finishes / Materials Available
• EG • P • HDG • SS • PVC
Size
Part No.
Black
Part No.
Copper
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
75DCLH/X
100DCLH/X
125DCLH/X
150DCLH/X
200DCLH/X
250DCLH/X
300DCLH/X
350DCLH/X
400DCLH/X
750CLHZ
100CLHZ
125CLHZ
150CLHZ
200CLHZ
250CLHZ
300CLHZ
350CLHZ
400CLHZ
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
75DABH
100DABH
125DABH
150DABH
200DABH
250DABH
300DABH
350DABH
400DABH
500DABH
600DABH
75DABHK
100DABHK
125DABHK
150DABHK
200DABHK
250DABHK
300DABHK
350DABHK
400DABHK
500DABHK
600DABHK
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Part No.
E.G.
187
Rentals
Part No.
Black
OnSite
Supply
Other Finishes / Materials Available
• EG • P • HDG
Pipe Size
Rod Size
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
Fasteners
Other Finishes / Materials Available
• P • HDG
Strut
Clevis Hanger
with Welded Shield
- 12” Long
Threaded
Rod
Clevis Hanger
with Welded Shield
- 10” Long
Anchors
clevis hangers / clevis hangers with shield
Fasteners
beam clamps / c-clamps
Anchors
C-Clamp
(Standard)
Steel No Locknut
D
Anvil Model No. 95
C
B
Strut
Size
Part No.
Black
Part No.
EG
3/8
1/2
5/8
3/4
7/8
37CCCL
50CCCL
62CCCL
75CCCL
87CCCL
37CCCLZ
50CCCLZ
62CCCLZ
75CCCLZ
87CCCLZ
Installed with Figure. 21-R, Factory Mutual Approved.
C- Clamp Loading with or without Locknut
Threaded
Rod
Max. Rec.
Load (lb)
400
500
550
630
1200
Max. Pipe
Size
C
D
F
4
2-3/8 2-3/8 3/4
4
5-3/8 2-5/16 3/4
5
2-3/8 2-5/16 3/4
6
2-3/8 2-1/4 3/4
8
2-3/4 2-5/8 3/4
Wt. (Approx.)
per 100
39
40
64
70
149
Pipe
Hangers
Tools
Junior Top
Beam Clamps
Malleable Iron
- 3/4” Opening
Abrasives
Size
Part No.
Black
Part No.
EG
3/8
1/2
5/8
3/4
7/8
37CJTB
50CJTB
62CJTB
75CJTB
87CJTB
37CJTBZ
50CJTBZ
62CJTBZ
75CJTBZ
87CJTBZ
OnSite
Supply
Size
Pipe
4
4
5
6
8
F
B
Maximum
Recommended Load (lb)
350
470
550
700
1000
Size
Part No.
Black
Part No.
EG
3/8
1/2
5/8
3/4
7/8
37CCLN
50CCLN
62CCLN
75CCLN
87CCLN
37CCLNZ
50CCLNZ
62CCLNZ
75CCLNZ
87CCLNZ
“Wide Mouth” Top Beam
Clamp Malleable Iron
1-1/4 Opening
Anvil Model No. 93 and 94
Size
Part No.
Black
Part No.
EG
3/8
1/2
5/8
3/4
37CWMT
50CWMT
62CWMT
75CWMT
37CWMTZ
50CWMTZ
62CWMTZ
75CWMTZ
Rod
Size A
3/8
1/2
5/8
3/4
Anvil Model No. 92
Rod
Size A
3/8
1/2
5/8
3/4
7/8
C
F
Also available in Stainless Steel
Size
(B)
3/8
1/2
5/8
3/4
7/8
D
C-Clamp
Steel with Locknut
Pipe
Size
1/2 to 2
2-1/2 to 3-1/2
4 and 5
6
Max. Recommended
Load (lb)
400
500
800
900
Wt. (Approx.)
per 100
38
49
66
83
Underwriters laboratories approved 3/8”, 1/2”
Retaining Straps
Wt. (Approx.)
per 100
30
39
40
67
66
#69R - Retrofit Strap
#69 - Retaining Strap
• 2 types, See next page for details
Underwriters laboratories approved 3/8”, 1/2”
Safety
1/4 Electrical Junior Top
Beam Clamp Malleable Iron
Malleable C-Clamp
Caddy Model No. BC2600 25EG
Available in sizes 3/8 - 1/2 - 5/8 - 3/4
Rentals
188
Hartford, CT
800-969-0285
Anvil Model No. 86
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1/4” - 3/8” Steel Caddy Model No. BC 200/400 EG
Beam Clamp
Caddy Model No. 315
BC200 - For 1/4” Threaded Rod
Anchors
Wide Flange
Purlin Clamp
Fasteners
beam clamps / retaining straps
BC400 - For 3/8” Threaded Rod
3/8 Rod Size
Rod Insulator Support
Retaining Straps
Part No.
Black
Part No.
EG
For Steel C-Clamps
For Malleable Beam Clamps
Retrofit Retaining Strap
CRS
JRS
No. 300R
CRSZ
JRSZ
Size
1/4
3/8
1/2
Max. Load No.
150
350
400
PS 85
Note: 7/8” max flange thickness
Standard Finish - Black E.G.
Finish Available
Retrofit Capable Beam Clamp Retaining Strap
“I” Beam
Clamp
Tolco Fig. #69R
Threaded
Rod
Size
Strut
PS 85 - Malleable Iron
PS 907 1/4
PS 998 3/8
3/8
1/2
450
900
26
64
Pipe
Hangers
PS 907, PS 998
Load
Set
Rating Weight 100
Part
No.
Thickness Screw per lb Pcs.
Ordering: Specify part number, rod size, and length ‘L’, (add 1” [25.4] minimum to
flange width), and finish.
Dimensions
Part No. Rod Size L (Length)
3/8
1/2
Specify
Specify
Dia. Construction Part No.
1/8 7 x 7
3/16 7 x 19
1/4 7 x 19
12DWIRH/7 x 7
8DWIRH/7 x 19
25DWIRH/7 x 19
Galvanized Wire Rope
Clips
Retaining Strap for Beam Clamps
Tolco Fig. #69
Dia.
Part No.
11/8
3/16
1/4
12DMWRH
18DMWRH
25DMWRH
Abrasives
69R
69R
Galvanized Wire
Rope
Service: Designed for use with various types of beam clamps.
Ordering: Specify type, rod size, and length ‘L’, (add 2” [50.8] minimum to flange
width), and finish. Dimensions
Part No. Rod Size ‘A’
Hole Size ‘B’ L (Length)
69
69
69
69
Philadelphia, PA
610-647-8070
3/8
1/2
5/8
3/4
1-1/4 7/16
1-1/4 9/16
1-1/4 11/16
1-1/4 13/16
Washington D.C.
877-419-2755
Specify
Specify
Specify
Specify
Boston , MA
800-645-6155
Dia.
Part No.
1/8
3/16
1/4
12DWRTH
18DWRTH
25DWRTH
Safety
Material: Steel
Standard Finish: Plain or Electro-Plated
OnSite
Supply
Galvanized
Thimbles
Galvanized 2-Hole 45º Open
Angle Bracket
Part No.
PS63345EG
Hartford, CT
800-969-0285
189
Rentals
Material: Steel
Standard Finish: Plain or Electro-Plated
Tools
Wire Rope Seismic Bracing Systems
Fasteners
roller hangers
Double Rod Rollers
Single Rod Rollers
(2 Rod Rollers)
(Clevis Type Rollers)
Anchors
Anvil Model No. 171
Anvil Model No. 181
Finishes Available
• E.G. • PVC • HDG
Finishes Available
• E.G. • PVC • HDG
Strut
Threaded
Rod
Pipe
Hangers
Pipe Size
Part No.
Black
Part No.
Painted
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
200DSRR
250DSRR
300DSRR
350DSRR
400DSRR
500DSRR
600DSRR
800DSRR
10ISRR
12ISRR
14ISRR
16ISRR
18ISRR
20ISRR
24ISRR
200DSRRP
250DSRRP
300DSRRP
350DSRRP
400DSRRP
500DSRRP
600DSRRP
800DSRRP
10ISRRP
12ISRRP
14ISRRP
16ISRRP
18ISRRP
20ISRRP
24ISRRP
Pipe Size
Part No.
Black
Part No.
Painted
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
200DDRR
250DDRR
300DDRR
350DDRR
400DDRR
500DDRR
600DDRR
800DDRR
10IDRR
12IDRR
14IDRR
16IDRR
18IDRR
20IDRR
24IDRR
30IDRR
200DDRRP
250DDRRP
300DDRRP
350DDRRP
400DDRRP
500DDRRP
600DDRRP
800DDRRP
10IDRRP
12IDRRP
14IDRRP
16IDRRP
18IDRRP
20IDRRP
24IDRRP
30IDRRP
Material:
Cast iron socket and roller; carbon steel cross rod.
Material:
Cast iron roll; carbon steel yoke and cross bolt.
Finish:
Black; electro-galvanized or painted to order.
Finish:
Black; electro-galvanized or painted to order.
For suspension of pipe from single support rod where
horizontal movement may occur because of expansion
or contraction.
Service:
For suspension of pipe where longitudinal movement
due to expansion and contraction may occur.
Service:
Ordering: Specify pipe size, figure number and finish.
Ordering: Specify pipe size, figure number and finish.
Tools
Abrasives
OnSite
Supply
Pipe
Size A
B
C
D
E** F
L
2
1/2 4
1-5/8 2-5/8 3
4-1/4 6-1/2
2-1/2 1/2 3-7/8 2
3-3/8 2-3/4 4-3/4 6-5/8
3
1/2 4-3/8 2-1/4 3-3/4 3-3/8 5-1/2 7-1/4
3-1/2 1/2 4-5/8 2-1/2 4-1/4 3-5/8 6
8
4
5/8 4-3/4 2-3/4 4-7/8 3-3/4 6-1/2 8-1/2
5
5/8 5-7/8 3-3/8 5-7/8 4-1/4 8
9-7/8
6
3/4 5-7/8 4
7
4-1/4 9
11-3/8
7
3/4 6-1/2 4-5/8 8
5
10
12
8
7/8 7-1/4 5-1/8 9
5-1/2 12
13-1/4
10
7/8 9
6-3/8 11
6-7/8 14-1/4 17
12
7/8 9-5/8 7-3/8 13
7-7/8 17
18-7/8
14
1
11-1/4 8-3/8 14-1/4 9-1/4 18-1/2 21-7/8
16
1
12-1/4 9-3/8 16-1/4 10-1/4 20
24-1/8
18
1
13-1/4 10-1/2 18-1/4 11-1/4 22
26-1/2
20
1
14-1/4 11-5/8 20-1/4 12-1/4 24
28-1/8
Max. Rec.
Load, lb
480
530
560
600
600
600
860
860
1080
1385
1920
2505
3180
3360
3640
** Rod Take-Out
Safety
Domestic Rollers available - Specify
Domestic when ordering
Pipe
Size
A
B
C
E**
L
1
3/8
1-1/16 3
2-5/8
4-1/8
1-1/4 3/8
1-1/4
3-3/8
2-13/16 4-1/2
1-1/2 3/8
1-3/8
3-5/8
2-15/16 4-3/4
2
3/8
1-5/8
4-1/8
3-3/16 5-1/4
2-1/2 1/2
1-15/16 4-7/8
3-5/8
6-1/4
3
1/2
2-1/4
5-1/2
3-15/16 6-7/8
3-1/2 1/2
2-9/16 6-1/8
4-5/16 7-1/2
4
5/8
2-13/16 6-3/4
4-13/16 8-1/4
5
5/8
3-7/16 8-1/16 5-9/16 9-11/16
6
3/4
4
9-9/16 6-1/2
11-7/16
7
3/4
4-11/16 10-3/4 6-13/16 12-1/2
8
7/8
5-1/8
11-15/16 8
14-1/16
10
7/8
6-3/8
14-1/16 9-1/4
16-3/16
12
7/8
7-7/16 16-5/16 10-7/16 17-15/16
14
1
8-3/8
17-3/4 12-1/8 20-1/8
16
1
9-7/16 20-3/4 12-15/16 22-1/8
18
1
10-1/2 21-7/8 14-1/4 24-1/2
20
1-1/4 11-5/8 24-1/4 15-3/4 27-1/4
24
1-1/2 14
28-5/8 18-3/4 32-1/8
30
1-1/2 17-7/16 35-1/2 22-7/8 39
Max. Rec.
Load, lb
600
600
600
600
660
700
750
750
750
1070
1100
1350
1730
2400
3130
3970
4200
4550
6160
7290
** Rod Take-Out.
Rollers Are Available In:
H.D.G. - with Zinc Plated Hardware • SS - Yoke and Hardware with H.D.G. Roller
Rentals
190
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Pipe Saddles
Fasteners
saddles / roller chair
(Insulation Covering Protection Saddles)
Anchors
Anvil Model No.160 thru No.165
Note: Heavy gauge steel - tack welded to pipe
Ordering information specify as follows
Roller Chairs
Strut
• Pipe Size 3/4” - 24”
• Insulation Thickness 1” - 4”
• Finish: Black - Painted - EG - HDG
* Use in Conjunction with Roller Hangers
Anvil Model No.175
Material: Cast iron roll, steel chair, roll rod, bolts and hex nuts
Finish: Plain or galvanized
Maximum temperature: 450°F at roller
Threaded
Rod
Size range: 2” through 30” pipe
Approvals: Complies with Federal Specification A-A-1192A (Type
44) WW-H-171-E (Type 45) and MSS-SP-69 (Type 44).
250DRCH
300DRCH
350DRCH
400DRCH
500DRCH
600DRCH
800DRCH
10IRCH
12IRCH
14IRCH
16IRCH
18IRCH
20IRCH
24IRCH
30IRCH
250DRCHP
300DRCHP
350DRCHP
400DRCHP
500DRCHP
600DRCHP
800DRCHP
10IRCHP
12IRCHP
14IRCHP
16IRCHP
18IRCHP
20IRCHP
24IRCHP
30IRCHP
Pipe Size
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
Max
Load (lb)
600
660
700
750
750
750
1,070
1,350
1,730
2,400
3,130
3,970
4,200
4,550
6,160
7,290
Philadelphia, PA
610-647-8070
How to size:
(1) If roll is to support bare pipe, select the size directly from
nominal pipe size (see below).
(2) If used with pipe covering protection saddle, see page PH-108
for size of pipe roll.
(3) If roll is to support covered pipe, the O.D. of the covering
should not be greater than the O.D. of the pipe for which the
roll was designed.
Ordering: Specify size of roll, figure number, name and finish. Be
certain to order oversized rolls when insulation and protection
saddles are required.
Weight
Dimensions (in)
(lb)
W
B
1.1
4
1-1/4
1.4
4-7/8
1-1/4
1.6
5-3/8
2
2.6
6-1/8
2
2.9
6-5/8
2
3.7
7-7/8
3
5.9
9-1/4
3-1/8
9.0
11-5/8
3-3/8
13.8
14-1/8
5-1/4
18.9
16-1/8
5-1/2
28.07
18-3/4
6-1/2
34.93
21
8-1/4
44.35
23-1/8
9-1/4
56.34
24-5/8
10-1/4
87.52
29-3/8
12-1/4
151.25
34-13/16
15-3/8
Washington D.C.
877-419-2755
Tools
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
Installation: Two bolts and nuts provide anchorage to floor or top
of steel beam or bracket or chair may be welded to supporting
steel.
Boston , MA
800-645-6155
C
1-1/2
1-5/8
1-3/4
2-1/16
2-5/16
2-1/2
2-3/4
3
3-5/8
4-1/8
4-11/16
5-3/8
6
6-1/2
7-7/8
8-3/4
F
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
3/8 x 1-1/2
1/2 x 1-1/2
1/2 x 1-1/2
1/2 x 1-1/2
5/8 x1-1-1/2
5/8 x 2
5/8 x 2
3/4 x 2
3/4 x 2-1/2
3/4 x 2-1/2
3/4 x 1-1/2
7/8 x 3-1/2
7/8 x 3-1/2
Hartford, CT
800-969-0285
H
1-5/8
1-15/16
2-1/4
2-9/16
2-13/16
3-7/16
4
5-1/8
6-3/8
7-7/16
8-3/8
9-3/8
10-7/16
11-5/8
14
17-7/16
Abrasives
Part No.
Painted
OnSite
Supply
Part No.
Black
Safety
Pipe Size
191
Rentals
Finishes Available
• E.G. • PVC • HDG
Pipe
Hangers
Service: For support of pipe where longitudinal movement due
to expansion and contraction may occur, but where no vertical
adjustment is required.
Fasteners
pipe roll stand
Pipe Roll Stand
Anchors
Anvil Model No. 271
Size Range: 2” through 42”
Material: Cast iron roll and stand
Finish: • Plain or • Galvanized
Service: For support of pipe where longitudinal movement due to expansion and
contraction may occur but where no vertical adjustment is required.
Maximum temperature: 450°F at roller.
Strut
Approvals: Complies with Federal Specification A-A-1192A (Type 44)
WW-H-171-E (Type 45) and MSS-SP-69 (Type 44).
DI/CI Roll Sizing
Installation:
(1) Two cored holes for anchorage bolts are provided on all sizes for fastening stands to welded steel
brackets, structural supports, piers, floors, etc.
Threaded
Rod
(2) In addition, cored holes “N” at the four corners of the stand are provided for anchorage purposes.
(3) The two cored holes on sizes 2” to 6” are on outside of stand (see dotted lines and dimension J’).
(4) On all other sides, the holes are inside of uprights (see dimension J).
How to size:
• If roll is to support bare pipe, select size directly from nominal pipe size (see below).
• If used with pipe covering protection saddle, see
page PH-131 for size of pipe roll.
Pipe
Hangers
Ordering: Specify pipe roll size, figure number, name
and finish. Be certain to order oversized rolls when
insulation and protection saddle are required.
DI/CI
Pipe Size
3
4
6
8
10
12
14
16
18
20
24
30
Fig. 271
Roller Size
4
5
6
8
10
14
16
18
20
24
30
N/A
Note: Standard line of carbon steel base plates
available.
Tools
Abrasives
Fig. 271: Weight (lb) • Loads (lb) • Dimensions (in)
OnSite
Supply
Safety
Size
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Rentals
192
Load
390
390
390
390
950
950
950
2,100
2,100
3,075
3,075
4,980
4,980
4,980
6,100
7,500
12,000
12,000
Weight
6.4
6.4
6.4
6.4
8.9
8.9
8.9
15.3
15.3
28.1
28.1
39.7
39.7
39.7
49.6
99.3
152.0
152.0
H
3-1/2
3-7/8
4-1/8
4-3/8
4-13/16
5-7/16
6-1/16
8-11/16
9-13/16
11-5/8
12
13-5/8
14-5/8
15-5/8
17-3/4
21-7/8
25-3/4
28-7/8
B
1-3/8
2-1/8
2-3/8
2-5/8
2-3/4
3-3/8
4
6-1/4
6-3/8
7-1/2
8-1/8
9-3/8
10-3/8
11-3/8
13-3/8
16-3/4
20
20-1/8
D
-
-
-
-
-
-
8-5/8
8-5/8
10-15/16
10-15/16
12-3/8
12-3/8
12-3/8
13-1/2
17
20
20
Hartford, CT
800-969-0285
D’
8-3/8
8-3/8
8-3/8
8-3/8
9-7/8
9-7/8
9-7/8
-
-
-
-
-
-
-
-
-
-
-
Pipe
E
F
G
J
5-3/8 2-3/4 1-7/8 -
5-3/8 2-3/4 1-7/8 -
5-3/8 2-3/4 1-7/8 -
5-3/8 2-3/4 1-7/8 -
5-5/8 3-3/4 2-1/16 -
5-5/8 3-3/4 2-1/16 -
5-5/8 3-3/4 2-1/16 -
6-5/8 6
3-1/4 4
6-5/8 6
3-1/4 4
7-7/8 8
4
5-3/4
7-7/8 8
4
5-3/4
8-5/8 9
4-1/2 6-3/4
8-5/8 9
4-1/2 6-3/4
8-5/8 9
4-1/2 6-3/4
8-5/8 10
4-7/16 7-1/2
10-3/4 12-1/2 5-1/2 10
12
15
6-3/8 12
12
15
6-3/8 12
Boston , MA
800-645-6155
Max
J’
L
6-3/8 9/16
6-3/8 9/16
6-3/8 9/16
6-3/8 9/16
7-7/8 3/4
7-7/8 3/4
7-7/8 3/4
-
3/4
-
3/4
-
3/4
-
3/4
-
7/8
-
7/8
-
7/8
-
1
-
1-1/4
-
1-1/2
-
1-1/2
M
11/16
11/16
11/16
11/16
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/2
1-3/4
1-3/4
N
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
13/16
13/16
13/16
13/16
1-1/16
1-5/16
1-5/16
Washington D.C.
877-419-2755
R
4
4
4
4
5-3/8
5-3/8
5-3/8
7-3/4
7-3/4
9-7/8
9-7/8
11-1/4
11-1/4
11-1/4
12-1/2
15-3/4
18-3/4
18-3/4
T
3-7/16
3-7/16
3-7/16
3-7/16
4-11/16
4-11/16
4-11/16
7
7
9-1/16
9-1/16
10-1/4
10-1/4
10-1/4
11-3/8
14-1/4
17
17
U
4
4
4
4
4-1/4
4-1/4
4-1/4
5
5
6
6
6-1/2
6-1/2
6-1/2
6-1/2
8
9
9
Philadelphia, PA
610-647-8070
Adjustable Pipe Roll Stand with Base
Anchors
Fig. 274: With Base Plate; Fig. 275: Without Base Plate
Fig. 274P: With Steel Base Plate
Fasteners
pipe roll stand
Size Range: 2” through 42”
Material: Cast iron base plate, stand roll;
steel adjusting screws
Finish: • Plain or • Galvanized
Strut
Service: For support of pipe lines where
longitudinal movement due to expansion
and contraction may occur and where
vertical and lateral adjustment during
installation may be required.
Installation: Base plate is provided with two holes for anchorage to floor, pier, structural
DI/CI Roll Sizing
support and similar constructions, as well as to welded steel brackets Fig. 195 page PH-66 and Fig. 199,
page PH-67. Adjustable pipe roll stand without base plate, Fig. 275, can be used for supporting tunnel DI/CI
Fig. 274
piping, etc., by resting ends of adjusting screws on structural steel angles, channels, etc.
Pipe Size
Roller Size
• If roll is to support bare pipe, select the size directly from nominal pipe size (see below).
• If used with pipe covering protection saddle, see page PH-131 for size of pipe roll.
Ordering: Specify pipe roll size, figure number, name and finish. For further dimensions of stand, see
Fig. 271, page PH-142. Be certain to order oversized rolls when insulation and protection saddles are
required.
Note: Standard line of carbon steel base plates available.
Pipe
Hangers
How to size:
4
5
6
8
10
14
16
18
20
24
30
N/A
Tools
3
4
6
8
10
12
14
16
18
20
24
30
Adjustment: Vertical adjustment is obtained by use of the four adjusting screws located on corners of
stand. Lateral adjustment is secured by stand sliding on each of adjusting screws.
Threaded
Rod
Maximum Temperature: 450°F at roller
Approvals: Complies with Federal Specification A-A-1192A (Type 46)
WW-H-171-E (Type 47) and MSS-SP-69 (Type 46).
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
H’
Min
5-1/8
5-3/8
5-3/4
6
6-1/2
7
8-1/8
10-3/8
11-1/2
13
13-5/8
15-1/4
16-3/8
17-3/8
19-5/8
24
28-3/8
31-1/2
H’
Max
E
W
K
5-3/8 5-1/2
6-7/8 1
5-5/8 5-1/2
6-7/8 1
6
5-1/2
6-7/8 1
6-1/4 5-1/2
6-7/8 1
7
5-3/4
8-1/8 1
7-1/2 5-3/4
8-1/8 1
8-1/8 5-3/4
8-1/8 1
11-5/8 6-3/4
10-5/8 1
12-3/4 6-3/4
10-5/8 1
14-1/4 8
13
1
14-7/8 8
13
1
16-5/8 8-5/8
14-5/8 1
17-3/4 8-5/8
14-5/8 1
18-3/4 8-5/8
14-5/8 1
21
8-5/8
15-3/4 1
26-3/4 10-1/2 19-1/4 1
31-3/4 11
23
1-1/8
34-7/8 11
23
1-1/8
Boston , MA
800-645-6155
V
Max
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-3/4
1-3/4
1-3/4
1-3/4
1-7/8
1-7/8
1-7/8
1-7/8
3-1/4
4-1/2
4-1/2
M
1
1
1
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-5/8
2
2
Hartford, CT
800-969-0285
P
3/4
3/4
3/4
3/4
3/4
3/4
3/4
13/18
13/18
3/4
3/4
7/8
7/8
7/8
1
1-1/4
1-1/2
1-1/2
R
1
1
1
1
1
1
1
1
1
1
1
1-3/16
1-3/16
1-3/16
1-3/16
1-3/8
2-1/4
2-1/4
S
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
1
1
1
1-1/4
1-1/2
1-1/2
193
OnSite
Supply
Weight
Fig. 275 Fig. 274P
7.8
15.3
7.8
15.3
7.8
15.3
7.8
15.3
10.3
19.3
10.3
19.3
10.3
19.3
18.1
32.1
18.1
32.1
32.1
51.2
32.1
51.2
45.3
71.3
45.3
71.3
45.3
71.3
55.0
87.0
109.2
166.2
176.0
304.0
176.0
304.0
Safety
Max
Load Fig. 274
390
15.2
390
15.2
390
15.2
390
15.2
950
19.3
950
19.3
950
19.3
2,100 32.1
2,100 32.1
3,075 51.2
3,075 51.2
4,980 71.3
4,980 71.3
4,980 71.3
6,100 87.0
7,500 166.2
12,000 304.0
12,000 304.0
Rentals
Pipe
Size
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Abrasives
Fig. 274, 275, 274P: Dimension (in)
Fasteners
pipe saddle supports
Adjustable Pipe Saddle Support Kit
Adjustable Pipe Saddle Support Kit, with U-Bolt
Anchors
•
•
•
•
All components are Hot Dipped Galvanized
Provides up to 4-1/2” adjustment
Field cut 2” schedule 40 HDG pipe to length
Sized for both IPS and ductile iron pipe
•
•
Fig. 428KT
Fig. 429KT
Ductile iron saddle with threaded coupling (428KT)
OR
Ductile iron saddle and U-Bolt with threaded coupling (429KT)
Kits come complete with:
Strut
•
•
•
•
•
1-1/4” x 8” straight tapped nipple
3” long cast steel 1-1/4” x 2” reducing coupling
(2) 3/8” x 1/2” stainless steel set screws
8” x 8” steel base plate
10 step installation guide
Threaded
Rod
Pipe Size
R
B
3
4
6
8
10
12
3/8” x 2
3/8” x 2
1/2” x 2
1/2” x 2
1/2” x 2
1/2” x 2
2.03”
2.45”
3.50”
4.58”
5.60”
6.65”
Pipe
Hangers
Both Kits factory tested
to 11,000 lbs
Also available
in 316 S/S
Fig. 428KT
Fig. 429KT
Tools
Abrasives
OnSite
Supply
Sized to fit over 2”
Sized to fit over 2”
schedule 40 pipe
schedule 40 pipe
2” Schedule 40 Pipe (Not Supplied,
2” Schedule 40 Pipe (Not
to be cut in the field
Supplied, to be cut in the field
Safety
Sized to fit over 2”
Plate:
schedule 40 pipe
1/4” x 8” x 8”
9/16” Holes
Sized to fit over 2”
schedule 40 pipe
Plate:
1/4” x 8” x 8”
9/16” Holes
(4 Corners)
Rentals
194
Hartford, CT
800-969-0285
(4 Corners)
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fixed: Where Vertical Adjustment is not required
Adjustable: When Vertical Adjustment is required
Anchors
Pipe Support Base
(Order Separately from Saddle Support)
Adjustable Pipe
Stanchion Saddle
with U-Bolt
Strut
Adjustable Pipe
Stanchion
Anvil Model No.191
Anvil Model No.192
• Adjustable made with Threaded
Rod
• Specify Pipe Size 2” thru 12”
Fasteners
pipe roll stand
Fig. 192: Weights (lb) • Dimensions (in)
Pipe Size
Rod Size
A
C
E
G
Weight
Pipe Size
Rod Size
A
E
G
Weight
2
2-1/2
3
3-1/2
4
5
6
8
10
12
5/8
5/8
5/8
5/8
7/8
7/8
1
1
1-1/4
1-1/4
9-7/16
9-11/16
10
10-1/4
10-1/2
11
11-11/16
12-11/16
13-7/8
14-7/8
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/4
3/8 x 1-1/2
3/8 x 1-1/2
1/2 x 2
12 X 2
1.2
1.4
1.6
2.6
3.0
3.2
4.9
6.2
10.5
11.8
2
2-1/2
3
3-1/2
4
5
6
8
10
12
5/8
5/8
5/8
5/8
7/8
7/8
1
1
1-1/4
1-1/4
9-7/16
9-11/16
10
10-1/4
10-1/2
11
11-11/16
12-11/16
13-7/8
14-7/8
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/4
3/8 x 1-1/2
3/8 x 1-1/2
1/2 x 2
1/2 x 2
1.0
1.4
1.6
2.6
3.0
3.2
4.9
6.2
10.5
11.8
OnSite
Supply
Abrasives
2-11/16
3-5/16
3-15/16
4-7/16
5-1/4
6-1/8
7-1/4
9-3/8
11-1/2
13-1/2
Tools
Fig. 191: Weights (lb) • Dimensions (in)
Pipe
Hangers
Threaded
Rod
• Adjustable made with Threaded
Rod
• Specify Pipe Size 2” thru 12”
Adjustable Pipe Saddle Support
Anvil Model No. 265
Size Range: 2-1/2 through 36 inch pipe
Material: Cast iron saddle, locknut nipple
and special cast iron reducer
- assembled -
Specify Pipe Size 2” thru 36”
Fixed Pipe Saddle Support
No U-Bolt
Anvil Model No. 264
Anvil Model No. 258
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
195
Safety
Anvil Model No. 259
Adjustable Pipe Saddle Support
with U-Bolt
Rentals
Fixed Pipe Saddle Support
Fasteners
center load beam clamps
Anchors
Anvil Model No. 218
Empire Model No. 218
“Ice-Tong” Adjustable
Center Load Beam Clamps
Steel Beam Clamps
Model No. 155
Ordering:
Specify clamp size, flange width, figure
number and finish.
Note:
Strut
Malleable Iron use with Grinnell No.157
Threaded
Rod
Max
Rod
Size A 2-3/8 3
Rod Take-Out,
For Width of Beam Flange
4
5
6
7
3/8
1/2
5/8
3/4
7/8
4-9/16 4-3/16 3-13/16
4-11/16 4-5/16 3-15/16
4-3/4 4-3/8 4
5
4-5/8 4-1/4
5-1/16 4-11/16 4-5/16
4-3/4
4-7/8
4-15/16
4-3/16
5-1/4
4-11/16
4-13/16
4-7/8
5-1/8
5-3/16
Weight Max.
(Approx.) Rec.
per 100 Load, lb
3-1/8 242
3-1/4 263
3-5/16 267
3-9/16 287
3-5/8 301
610
1130
1365
1365
1365
Pipe
Hangers
Extension Piece
for Center Load Beam Clamps
Max. Rec.
Load (lb)
550
850
1100
1500
2600
4300
Adjustable Beam Clamps
Anvil Model No. 14
Anvil Model No. 157
Rod sizes - 3/8 thru 7/8
Tools
Rod Size
3/8
1/2
5/8
3/4
7/8
Center Load Beam Clamps
Anvil Model No. 133 - Standard
Anvil Model No. 134 - Heavy
Load (lb)
700
1130
1365
1365
1365
Abrasives
Adjustable Side
Beam Clamps
OnSite
Supply
Flange Size
Flange Max. Flange
Weight (lb)
Fig. 133 Std. Duty Fig. 134 Heavy Duty
Width Thickness
4
1/2
.091
3.82
5
5/8
1.00
4.35
6
3/4
1.15
4.52
7
7/8
1.29
4.84
8
7/8
1.44
5.10
9
1
-
5.83
10
1
-
6.25
11
1
-
6.67
12
1
-
7.09
Fig. 133, 134: Loads (lb) • Dimensions (in)
Anvil Model No. 217
TYPE
Rod Size
Max Load (lb)
1
3/8
300
2
1/2
500
3
5/8
700
SPECIFY FLANGE WIDTH WHEN ORDERING
Weldless Eye Nuts
Safety
Anvil Model No. 290
Part No.
C
Bolts
B
Spacer
Size
Max
O.D.
Load
Fig. 133
Fig. 134
1-3/8
2-1/4
3/8
5/8
1-1/16
1-1/16
1,000
3,000
1/2
3/4
Clamp
Size
Stock Size
A
B
C
1
1/4 x 1-1/4
4
3
3/8
1/2
2
1/4 x 1-1/2
4
3
3
3/8 x 1-1/2
5/8
4-1/2 3-1/4
3/4
4
3/8 x 2
4-1/2 3-1/4
5
1/2 x 2
5
3-1/2
7/8
1
6
1/2 x 2-1/2
5
3-1/2
Note:
• Forged Steel • 3/8 - 2 1/2 Rod Size
Also Available Black • E.G
Rentals
NOTE: All Beam Clamps Available• B • EG • P • HDG
196
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Heavy Duty UFS Beam Clamp
Forged Steel with Welded Eye Nut
Anvil Model No. 228
Anvil Model No. 292
Fig. 228: Loads (lb) • Dimensions (in)
Fig. 292, Fig. 292L • Weight (lb) • Dimensions (in)
Max
Load
Z
2,160
0.60
4,480
0.60
4,480
0.60
11,500
1.031
11,500
1.031
B
1-1/16
1-3/8
1-3/8
2-3/8
2-3/8
* Furnished with links
Clamp
Size No.
1
2
3*
4
5*
6
7*
8
Max Rod
Size A
3/4
1
1
1
1
1-1/2
1-1/2
2
Max
Load
3,320
5,900
5,900
5,900
5,900
11,500
11,500
11,500
Beam Clamp Assembly
* Furnished with links
Empire Model No. 450
Weld Beam Attachments
Z
Max
0.60
0.60
0.60
1.031
1.031
1.031
1.031
1.031
B
1-1/4
1-11/16
1-11/16
1-1/2
1-1/2
2-1/8
2-1/8
4-9/16
Pipe
Hangers
Max
Rod Size A
5/8
7/8
7/8
1-1/2
1-1/2
Tools
Clamp
Size
1
2
3*
4
5*
Threaded
Rod
Strut
Anchors
Heavy Duty UFS Beam Clamp
Forged Steel with UFS Nut
Fasteners
heavy-duty beam clamps / weld beam attachment
Philadelphia, PA
610-647-8070
Flange Size
Thickness
5/8
5/8
3/4
3/4
1
1
Load
in lb
2,800
2,800
5,000
5,000
11,500
11,500
Max.
Rod Size
3/4
3/4
1
1
1-1/2
1-1/2
Washington D.C.
877-419-2755
Weight
Each
8#
12#
11#
16#
30#
48#
Part No.
Black
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
37DWBA
50DWBA
62DWBA
75DWBA
87DWBA
100DWBA
125DWBA
150DWBA
175DWBA
200DWBA
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Use position A
only for 1” and larger
Order Nut and Bolt
separately if required
◆◆◆◆◆
Other Finishes available
• E.G
• PVC
• HDG
197
Safety
Size
Width
1
3-8
2*
7-12
3
3-8
4*
7-15
5
5-11
6*
8-16
Size
Rentals
Material: Clamps are made of steel, weldless eye nuts of forged
steel to ASTM-A 235 Class C.
OnSite
Supply
Abrasives
Anvil Model No. 66
Fasteners
pipe clAMPS / PIPE PIER®
Standard Double Bolt
Pipe Clamps
Standard Pipe Clamps
Anvil Model No. 212
Anchors
Anvil Model No. 295
Strut
Threaded
Rod
Pipe
Size
Max.
Load (lb)
Part No.
Black
Pipe
Size
Max.
Load (lb)
Part No.
Black
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
850
850
850
850
1380
1380
1380
1380
1805
2230
2230
50DDBP
75DDBP
100DDBP
125DDBP
150DDBP
200DDBP
250DDBP
300DDBP
350DDBP
400DDBP
500DDBP
6
8
10
12
14
16
18
20
24
30
2555
2555
2890
2890
3835
3835
3835
4900
4015
4015
600DDBP
800DDBP
10IDDBP
12IDDBP
14IDDBP
16IDDBP
18IDDBP
20IDDBP
24IDDBP
30IDDBP
Note: Sizes 1/2 - 30” Pipe Finishes
available
• B • E.G. • HDG • SS
Heavy Duty Pipe Clamps
Anvil Model No. 216
Note: Sizes 3 - 24” Pipe Finishes
available
• B • E.G. • HDG • SS
Offset Pipe Clamps
Pipe
Hangers
Heavy Duty “Double” Bolt
Pipe Clamps
Anvil Model No. 295
Note: Sizes 3/4 - 10” Pipe
Finishes available
• B • E.G. • HDG • SS
Note: Sizes 6 - 36” Pipe
Finishes available
• B • E.G. • HDG • SS
Tools
Extended Pipe Clamps
Legend Material or Finishes
Abrasives
B
EG
P
HDG
PVC
K
S
=
=
=
=
=
=
=
Anvil Model No. 103
Black
Electro Galvanized or Zinc Plated
Painted
Hot Dip Galvanized
P.V.C. Coated
Copper
Stainless Steel
Note: Sizes 3/4 - 8” Pipe
Finishes available
• B • E.G. • HDG • SS
OnSite
Supply
Pipe Pier is designed for support
systems in roof or floor applications
and air handling spaces
New Heavy Duty Pipe Pier
Safety
For applications with larger
loads
New Plenum Pier
TM
For air handling space
installations
Rentals
198
UPC No. Part
782856 No.
Description
Pipe Pier
(strut finish)
Load
Weight
Capacity
Quantity
per Each Figure
per Block per Bundle lb
No.
41921
PP50H4
41920
PP50H6
44514
PP150H4
44516
PP300H4
45146
PP50H2AH
PG = Pre-galvanized
10-1/2” L x 4” W x 4” H (PG)
10-1/2” L x 4” W x 6” H (PG)
12” L x 12” W x 4” H (PG)
21-1/2” L x 12” W x 4” H (PG)
10-1/2” L x 4” W x 2” H (CG)
CG = Yellow Dichromate
50
50
150
300
50
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
10
10
3
3
10
Washington D.C.
877-419-2755
1.2
1.5
3.9
9.0
0.9
1
1
2
2
3
Philadelphia, PA
610-647-8070
Concrete Clevis Plate
Anvil Model
No. 281 Steel
No. 282 Malleable Iron
Anvil Model No. 49
Malleable
Insert Nut
Max.
Load (lb)
37CCINM
50CCINM
62CCINM
75CCINM
87CCINM
610
1130
1140
1140
1140
Steel Box - Part #OUBCIB
Malleable Iron - #OUCIBM
Order insert nuts separately
Finishes • B • E.G.
Concrete Rod
Attachment Plate
Anvil Model No. 49
Threaded
Rod
Max.
Load (lb)
240
610
1130
1200
1200
1200
Note:
Continuous Concrete Insert
1-5/8” x 1-3/8”
Concrete Lug Plate
Pipe
Hangers
Power Strut
Model No. PS 349
Anvil Model No. 47
A
3/8
1/2
5/8
3/4
7/8
1
Stock
1-1/4 x 1/8
1-1/2 x 1/8
1-1/2 x 3/16
1-1/2 x 1/4
1 x 1/4
2 x 1/4
T
1
1-1/4
1-1/2
1-3/4
2
2-1/4
PYRAMID 300
RS
3/8
1/2
5/8
3/4
7/8
PYRAMID 600
Rod Size
3/8 x 8
1/2 x 8
5/8 x 8
3/4 x 12
7/8 x 12
Plate Size
1-1/4 x 10
1-1/4 x 10
1-1/4 x 10
2x5
3x8
Abrasives
Size No.
1
2
3
4
5
6
NEFCO Model No. 370A
COLUMN SUPPORTS
OnSite
Supply
NEFCO Model No. 1600
Tools
Metal Deck and Concrete Ceiling Bolts
CADDY® Pyramid 50
∙∙ Supports up to 50 lb. loads.
∙∙ Electro-galvanized (EG) finish provides superior corrosion protection.
∙∙ Polyethylene closed-cell foam & 16-ga.
steel construction.
∙∙ Metal top designed to shed water
and minimize water collection on
foam.
∙∙ Absorbs shock and vibration.
∙∙ Protects roof membrane.
∙∙ The 4” high model has a 10 3⁄8” x 4”
footprint.
∙∙ The 6” high model has a 10 3⁄8” x 4
3
⁄4” footprint.
PYRAMID 25
CADDY® Pyramid Pipe &
Equipment Supports
∙∙ Dramatically reduces installation time by
replacing labor-intensive methods for supporting pipes, conduits and equipment.
∙∙ Support multiple runs of pipe and conduit
on roofs and below raised floors
∙∙ Supports concentrated loads of up to
600 lbs.
∙∙ Absorbs shock and vibration.
Philadelphia, PA
610-647-8070
#50
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
See
Pages
238-241
for
ordering
info
199
Safety
Steel
Insert Nut
25CCIN
37CCIN
50CCIN
62CCIN
75CCIN
87CCIN
Rentals
Size
1/4
3/8
1/2
5/8
3/4
7/8
Strut
Concrete Insert Boxes
Anchors
Concrete Attachments
Fasteners
CONCRETE ATTACHMENTS / METAL DECK CEILING BOLTS
Fasteners
pre-insulated pipe supports
Pipe Shields - Themally Isolate Pipe
Anchors
Pre-insulated pipe supports from Pipe Shields, Inc. have
become standards in commercial, industrial, petrochemical
and power construction markets.
These pre-insulated pipe supports best meet the market’s
basic and essential pipe support considerations because
they:
Strut
Full Line Available Call for technical
information and
product details
Simplify installation
Threaded
Rod
•
One trip installation
•
One-trade responsibility
•
Used as installation devices
•
Eliminate welding to the pipe
•
Easy location adjustment after install
Engineering Services
Pre-Insulated Pipe Supports
Pipe
Hangers
Commercial Market
Heavy Industrial Market
• Chilled water
• Hot water
• All other insulated lines
• Risers • Cryogenic • Any type slide pads
• Heat traced applications
• Slides, guides and anchors
• High temperature • High temperature gasses
• Low temperature liquids • High pressure steam
• High density structural insulation calcium silicate
and urethane
• Pipe insulation fits directly to support
• Pipe support design and qualification
• Pipe stress flexibility and seismic
analysis
• Computerized design and drafting
(AutoCAD)
• Seismic evaluation of auxiliary steel
supports and anchorage
Tools
Standard Insulated Pipe Supports
Commercial and Light Industrial
Model
Pipe
Size
Range
Primary
Installed On
Application
Flat
Clevis
Pipe
Hot
Cold Surface Hanger
Roll
Max Load
(lb) for
24” Pipe
Abrasives
A1000 Series
OnSite
Supply
A1000
A2000
A3000
A3000
A4000
A4000
1/2 - 24
1/2 - 24
1/2 - 24
1/2 - 4
1/2 - 24
1/2 - 4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
2,300
2,300
2,400
N/A
2,400
N/A
A5000
A6000
A7000
A7200
A7400
A8000
A8200
A8400
2-1/2 - 42
2-1/2 - 42
2-1/2 - 42
6 - 42
10 - 30
2-1/2 - 42
6 - 42
10 - 30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1,400
1,400
2,300
4,100
5,500
2,050
3,675
4,950
200
A5000-7000
Series
Safety
Rentals
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
A8000 Series
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
B4000 Series Guides
(Lateral Stop) up to 9”
Axial Travel L = .2L
V
V
LV = Dead Load
LL = Lateral Load
Philadelphia, PA
610-647-8070
Max. Load (lb)
for 24” Pipe
B1000
B1100
B1200
B1300
3 - 42
3 - 42
3 - 42
12 - 42
1-1/2
1-1/2
1-1/2
1-1/2
1/2
1/2
1/2
1/2
No
No
No
No
3,600
7,200
10,800
14,400
B2000
B2100
B2200
B2300
3 - 42
3 - 42
3 - 42
12 - 42
4-1/2
4-1/2
4-1/2
4-1/2
1/2
1/2
1/2
1/2
No
No
No
No
3,600
7,200
10,800
14,400
B3000
B3100
B3200
B3300
3 - 42
3 - 42
3 - 42
12 - 42
1-1/2
1-1/2
1-1/2
1-1/2
0
0
0
0
Yes
Yes
Yes
Yes
3,600
7,200
10,800
14,400
B4000
B4100
B4200
B4300
3 - 42
3 - 42
3 - 42
12 - 42
4-1/2
4-1/2
4-1/2
4-1/2
0
0
0
0
Yes
Yes
Yes
Yes
3,600
7,200
10,800
14,400
B5000
B5100
B5200
B5300
3 - 42
3 - 42
3 - 42
12 - 42
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
No
No
No
No
3,600
7,200
10,800
14,400
B6000
B6100
B6200
B6300
3 - 42
3 - 42
3 - 42
12 - 42
4-1/2
4-1/2
4-1/2
4-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
1-1/2 - 4-1/2
No
No
No
No
3,600
7,200
10,800
14,400
B7000
B7100
B7200
B7300
3 - 42
3 - 42
3 - 42
12 - 42
1-1/2
1-1/2
1-1/2
1-1/2
0
0
0
0
With Slide pads
With Slide pads
With Slide pads
With Slide pads
3,600
6,450
9,700
12,900
B8000
B8100
B8200
B8300
3 - 42
3 - 42
3 - 42
12 - 42
4-1/2
4-1/2
4-1/2
4-1/2
0
0
0
0
With Slide pads
With Slide pads
With Slide pads
With Slide pads
3,600
6,450
9,700
12,900
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
201
Fasteners
Abrasives
OnSite
Supply
Safety
B8000 Series Guides
(Lateral Stop) up to 9”
Travel L = .5L
L
Lateral
Guide
Tools
B5000 Series Slides
up to 9”
Lateral Travel up to 3”
Axial Travel
Travel (Inches) +/-
Axial
Lateral
Rentals
L
Pipe
Range
Anchors
B1000 Series Slides
up to 3” Axial Travel
up to 1” Lateral Travel
Model
Strut
Heavy Industrial - Base Mounted Slides and Guides
Threaded
Rod
Pipe Shields
Standard Insulated Pipe Supports
Pipe
Hangers
pre-insulated pipe supports
Fasteners
pipe slides
Pipe Slide Assembly
Various Types And Sizes Are Available‑ Call For Technical Assistance
Anchors
Strut
Type 2
Type 3
Type 4
Type 5
Type 6
Threaded
Rod
Type 1
Pipe
Hangers
Slide Configuration
Tools
Figure 257
Figure 257
Figure 257
Type 2
Type 1
Figure 257
Type 3
Figure 257
Type 4
Type 5
Figure 257
Type 6
Figure 436
Abrasives
Types 1-6
With 212 Clamps
Figure 436
Figure 436
Figure 436
Type 2
Type 1
Type 3
Figure 436
Figure 436
Type 4
Type 5
Figure 436
Type 6
OnSite
Supply
Figure 436
Types 1-6
With Endplates
Figure 439
Figure 439
Figure 439
Figure 439
Type 2
Type 1
Type 4
Type 3
Type 5
Safety
Types 1-6
With 212 Clamps
Rentals
202
Figure 257
Types 1-6
With 432 Clamp
Figure 257
Types 1-6
With Endplates
Hartford, CT
800-969-0285
Figure 436
Types 1-6
With 212 Clamp and
Endplates
Figure 439
Figure 439
Figure 257
Figure 436
Types 1-6
With 432 Clamp
Figure 257
Types 1-6
With 212 Clamp
and Endplates
Boston , MA
800-645-6155
Types 1-5
With 212 Clamps
Washington D.C.
877-419-2755
Figure 439
Types 1-5
With 432 Clamp
Philadelphia, PA
610-647-8070
Pipe Alignment Guides - Spider Guides
Strut
3-1/2”
4
5
5
5
5
5
5
6
6
7
8
9
10
11
11
12
13
14
4”
5
5
5
5
5
6
6
6
7
8
8
9
10
12
12
13
14
14
Threaded
Rod
3”
4
4
4
4
4
5
5
5
6
6
7
8
9
10
11
12
13
14
INSULATED SERIES
STANDARD SERIES
Pipe
Hangers
1”
1
1
1
1
2
2
3
3
4
5
5
6
8
9
10
11
12
13
14
Guide Size Selection Chart
Insulation Thickness
1-1/2” 2”
2-1/2”
1
2
3
2
3
4
2
3
4
2
3
4
2
3
4
3
4
4
3
4
4
4
4
5
4
5
6
5
5
6
5
6
6
6
7
8
8
8
9
9
9
10
10
10
10
11
11
11
12
12
12
13
13
13
14
14
14
Tools
Pipe Size
1/2”
3/4
1”
1-1/4”
1-1/2”
2”
2 1/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
24”
Anchors
Standard Series - Insulated Series
Finish: Painted
To Order: Specify - Pipe Size or Pipe Insulation Insulation Thickness
Fasteners
slides / guides / anchors
Philadelphia, PA
610-647-8070
Figure 436A
Figure 436A
With 212 Clamps
Washington D.C.
877-419-2755
Figure 436A
With 432 Clamps
Boston , MA
800-645-6155
Figure 436A
Figure 436A
Figure 257A
With Endplates
With Endplates and
212 Clamps
With Endplates
Figure 439A
Figure 439A
Figure 439A
With 212 Clamps
Hartford, CT
800-969-0285
OnSite
Supply
Figure 257A
With 432 CWAP
Safety
Figure 257A
With Endplates
and 212 Clamps
Figure 257A
With 212 Clamps
With 432 Clamps
203
Rentals
Figure 257A
Abrasives
Pipe Anchors
Various Types And Sizes Are Available - Call For Technical Assistance
Anchor Configuration
Fasteners
thermal hanger shields / Spring hangers
Thermal Hanger Shields
Anchors
Calcium Silicate Material
NEFCO has available a complete line of insulated pipe shields and pipe supports
Manufacturers Represented: • Pipe Shields Inc. • Rilco • Valve Engineered Products • Grinnell
Application:
Strut
Model A5000 is designed for use on:
• Hot Water • Steam • Cold Water • Chilled Water
• Gas • Vacuum • Dual Temperature • Air
Intended for installation on:
• Flat Surfaces
• Pipe Rolls
Temperature Range: - 20°F to + 1200°F
Performance Test
Reports On File:
Threaded
Rod
T1365-P01 8308001.021
8406001.013 8511001.014
Pipe
Hangers
Material Data:
• A5000 Applicable PSI specification document: No. 205. • Glue: Industrial contact cement. Minimum peel strength 23 lb/inch width.
• Jackets: Galvanized Steel ASTMA A-527. • Load Distribution Plate. Carbon Steel ASTM A-36.
• Insulation: Calcium silicate - 100 psi average compressive strength. Asbestos-free, treated with water repellent. k=0.38 BTU-in (hr
ft2°F)
• Primer Coating: Inorganic zinc to ANSI N101.21972 and ANSI N5. 12-1974. Corrosion resistant, abrasion resistant, 750°F
temperature resistant.
Tools
Spring Hangers - Constant Supports - Sway Braces
Typical Applications
Abrasives
OnSite
Supply
How To Determine Type:
Safety
The type of variable spring hanger to
be used depends on the physical characteristics
required by the suspension problem; i.e. amount
of head room, whether pipe is to be supported
above the spring or below the spring, etc.
consideration should be given to the seven
standard types offered (see line cuts of types “A”
through “G”).
Special variable spring hangers can be fabricated
for unusual conditions.
Rentals
204
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Engineered Pipe Hanger Support Systems – Turnkey Hanger Systems
• P.E. Stamped Documents and Drawings
• Supports Located on Drawings
• Pipe Stress Analysis (if required)
Tools
Pipe
Hangers
• Engineer and Design per Plans and Specifications
• Fabricate and Supply
• Detailed Submittals
• Field Walk-Through & Verification
Threaded
Rod
Strut
Anchors
ENGINEERING SERVICES &
TECHNICAL SALES DIVISION
• Design and Locate
Seismic Bracing / Vibration Isolation Equipment
Abrasives
Pre-Insulated Supports: Anchors / Slides / Guides
• Take Offs
• Detailed Submittals
• Stamped Engineering P.E. Drawings and Details
• Fabricate and Supply
Flange Bolt Sets
Innerlynx / Linkseal
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
205
Rentals
Safety
OnSite
Supply
Firestopping
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Full Line of
Stainless Steel Hangers
AVAILABLE
Tools
Abrasives
OnSite
Supply
Safety
Rentals
206
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
steel brackets & vibration isolation products
199 - Heavy Welded Steel Bracket
C
6-1/2
10-1/2
16-1/2
D
5/16
5/16
3/8
Bracket
No.
0
1
2
3
4
5
F
4
5
5
5
6
6
G
1-1/2
2
2
2
2-1/2
2-1/2
D
1-3/8
1-7/16
1-1/2
1-5/8
1-1/2
1-1/2
E
2-3/4
2-3/4
2-3/4
3
3
3-1/2
H
2
2
2-1/2
2-1/2
3-1/2
3-1/2
J
1/4
3/8
5/16
5/16
3/8
3/8
K
–
2-3/4
2-1/2
2-1/2
3-1/2
3-1/2
L
13/16
15/16
1-1/16
1-1/16
1-1/16
1-1/16
See page 230
for details
Vibration Isolation Products Hangers
195 - Medium Welded Steel Bracket
PC30
30
HD
Maximum Recommended Load: 1,500 lb
WHD
A
12
8
24
B
18
24
30
C
15-1/2
21-1/2
27-1/2
D
1-1/4
1-1/4
1-1/4
Bracket
No.
0
1
2
E
2-1/2
2-1/2
2-1/2
G
1-1/2
1-3/4
2
H
1-1/2
1-3/4
2
J
1/4
3/16
1/4
L
13/16
13/16
13/16
F
4
5
5
See page 230 for
Vibration Isolation Ordering
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Spring Mounts
SLR
SSLFH
OnSite
Supply
Wt. (Approx.)
(lb) Each
17.4
27.3
47.7
Abrasives
Weights • Dimensions (Inches)
Bracket
No.
0
1
2
Mounts And Pads
RBA &
RCA
Super W
SWM
ND
Boston , MA
800-645-6155
Threaded
Rod
B
8
12
18
C
15-1/4
21-3/8
27-1/2
33-1/4
39
46
Pipe
Hangers
A
9
13
19
B
18
24
30
36
42
50
Through
Hole Hole
HLW
Hartford, CT
800-969-0285
SWML
SWMFB
Counterbore
Hole
Friction
Pad On
Top
207
Safety
Wt. (Approx.)
(lb) Each
3.1
7.7
12.8
Wt. (Approx.)
(lb) Each A
24.3
12
51.8
18
65.8
24
82.1
30
140.5
36
166.4
42
Rentals
Weights • Dimensions (Inches)
Bracket
No.
0
1
2
3
4
5
Tools
Weights • Dimensions (Inches)
Maximum Recommended Load: 750 lb
Bracket
No.
1
2
3
Strut
Maximum Recommended Load: 3,000 lb
194 - Light Welded Steel Bracket
Fasteners
Steel Sections W-Beams
Anchors
W-Beams
Wide Flange
ASTM A-36
Standard Sizes x 20 ft
Nom Depth
in Inches x
Wt. / ft / lb
W4
x
13.0
W5
x
16.0
W6
x
19.0
W8
x
10.0
W10
x
12.0
W12
x
14.0
W14
x
22.0
W16
x
26.
W18
x
35.0
Note:
Other Sizes Available Call For Information
Finishes: Black And Prime Painted
Strut
Angle Iron
(Angles)
Standard Sizes x 20 ft
Nom Depth
in Inches x
W21
x
W26
x
W27
x
W30
x
W33
x
W36
x
Wt. / ft / lb
44.0
55.0
84.0
99.0
118.0
135.0
“Strong Back” Channel Assembly
Finish: • B • P • E.G • H.D.G
Threaded
Rod
Standard Sizes x 20 ft
1 1/2 x 1 1/2 x 1/4
2 x 2 x 1/4
3 x 3 x 1/4
3 x 3 x 3/8
4 x 4 x 3/8
ASTMA A-26
Steel - Black
150D150ANI / 1/4 x 20
200D200ANI / 1/4 x 20
300D300ANI / 1/4 x 20
300D300ANI / 3/8 x 20
400D400ANI / 3/8 x 20
Grinnell Model No.45
To Order Specify: Figure 45 Channel Assembly,
(Channel Size), Rod Size, (C To C)
E = C To C + 2L + W
Pipe
Hangers
Channel Iron
Channel Mat’l.
ASTM A-36 CS
Washer Plate Mat’l.
Finish: • B • P • E.G • H.D.G
ASTM A-36 Or A-515 GR 65-70 CS
Tools
Standard Sizes x 29 ft ASTMA - 36
Depth x
Wt/ft/lb
Steel - Black
3”
x
4.1
300D2000CHI
4”
x
5.4
400D2000CHI
5”
x
6.7
500D2000CHI
6”
x
8.2
600D2000CHI
8”
x
8.5
800D2000CHI
Finish: • Black • Painted • E.G • H.D.G
Diamond Plate
4-Way Safety Plate
Note: Other Sizes Available Call For Information
Abrasives
Finishes: Black And Prime Painted
Materials: • Steel • Aluminum
Sizes Standard 4 x 8 ft
Custom Fabrication
OnSite
Supply
Safety
We Offer In-House
Bending Of Plate
Or Sheet Metal,
Anchor Bolts To
Your Specification
And Welding Per
Your Detailed
Drawings.
Rentals
208
Thickness 1/8” - 3/16” - 1/4”
Punched Angle
Special
Water
Stop
•
•
•
•
•
•
Special
Steel
Sleeve
Hartford, CT
800-969-0285
FOR
Boston , MA
800-645-6155
Threading
Bending
Welding
Sawing
Shearing
Flame Cutting
Washington D.C.
877-419-2755
•
•
•
•
•
Punching
Milling
Drilling
Painting
Galvanizing
Philadelphia, PA
610-647-8070
Split Sleeve
(No Tabs)
Straight Pipe Sleeve
Split Sleeve
(w / Nail Tabs)
Fasteners
Sheet Metal Sleeves
Schedule 40 Steel Sleeves
Anchors
Sleeves
Material: Schedule 40 Steel pipe
Finish: Black, Galvanized or Painted
Optional Lugs
Material: Galvanized, sheet metal
Sizes: Split sleeves are furnished in all diameters and lengths
Ordering: Specify length, diameter, with or w/o nail tabs
Round Waterstop Sleeves
Nailing Sleeve (Solid)
NEW Plastic Sleeves!
See Page 244
Pipe
Hangers
Material: Schedule 40 Steel pipe
Material: Galvanized, sheet metal
Service Application: Waterstop sleeves are produced
from standard weight pipe and come with a continuously
welded water stop of 3/16 steel plate
Sizes: Nailing sleeves are furnished in all diameters
and lengths and (with a sheet metal protective lid if
required)
Ordering: Specify nominal pipe diameter, dimensions A,
length and finish
Ordering: Specify diameter, length and whether cover is
required
Tools
Finish: Black, Galvanized or Painted
Square Waterstop
Sleeves
Threaded
Rod
Ordering: Specify nominal pipe size A, length, finish and if
welded nailing lugs are required
Strut
Service Application: Pipe Sleeves are cut from standard
weight pipe and furnished with welding nailing lugs when
specified
Q Deck Sleeve
Note:
* Special Note:
Material: Galvanized, sheet metal
1) Specify Round or Square
2) “Stops” will be 2” unless specified
Caddy Pipe Sleeve Positioner
• Requires only a hammer to install
• Will accommodate Schedule #40, #80 and
smaller wall thickness
• Provides secure positioning of pipe sleeve for
concrete pouring of wall and floor forms
Part No.
740
740
4H58
4H58
4H912
Fig No.
1
1
2
2
2
Philadelphia, PA
610-647-8070
Sleeve Diameter
Wall Thickness
All Diameter
2”-6”
6”
8”-10”
9”-14”
5/16” and under
Schedule #40 Pipe
Schedule #80 Pipe
Schedule #40 Pipe
Schedule #80 Pipe
Washington D.C.
877-419-2755
Plastic
Top
Taper Height Part No.
Pipe Sleeve Diameter
Hole-Outs
Hole-Outs
Boston , MA
800-645-6155
1-1/2”
2”
3”
4”
5”
6”
8”
Hartford, CT
800-969-0285
1 8”
1 8”
3 8”
3 8”
3 8”
3 8”
3 8”
150DHOO
200DHOO
300DHOO
400DHOO
500DHOO
600DHOO
800DHOO
209
Safety
Ordering: Specify length, diameter, size of flange, and
flange location
®
OnSite
Supply
Service Application: Deck sleeves are furnished in all
diameters and lengths
Rentals
Abrasives
Flange is tack welded, not
watertight
Fasteners
link seal / innerlynx®
Standard Innerlynx® Models and Properties
Anchors
Strut
Innerlynx® is
shipped as
a belt of 10
interconnected
rubber links.
Threaded
Rod
See next
page for
sizing
chart
Innerlynx® Installation Instructions
Pipe
Hangers
2
1
Tools
Abrasives
Center the pipe, cable or
conduit in wall opening or
casing. Make sure the pipe
will be adequately supported
on both ends. The Innerlynx
is not intended to support
the weight of the pipe.
3
Connect both ends of the
belt assembly
around the pipe.
5
Check to be sure all bolt
heads are facing the installer. Extra slack or sag
is normal. Do not remove
links. Note: On smaller
diameter pipe links may
need to be stretched.
6
4
With a hand tool, pretighten the belt assembly
by giving each bolt about
2 turns.
7
8
OnSite
Supply
Safety
Slide belt assembly into
annular space.
Rentals
210
Start at 12 o’clock and tighten bolt until rubber begins to
“bulge.” Do not tighten any
bolt more than 4 turns at a
time. Continue in a clockwise
manner until links have been
uniformly compressed.
(Approx. 2 or 3 rotations)
Hartford, CT
800-969-0285
Make 2 or 3 more passes
at 3 turns per
bolt, tightening all bolts
clockwise.
Boston , MA
800-645-6155
Installation Complete
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
IN STOCK for
IMMEDIATE
DELIVERY!
Fasteners
link seals / innerlynx®
Innerlynx Sizing & Ordering Information
See Page 244 for
the NEW
Tools
Pipe
Hangers
Threaded
Rod
Strut
Specify:
1. Pipe outside diameter
2. Wall sleeve or core drill inside diameter
3. Model of Innerlynx
4. Specify steel or stainless steel hardware
5. Wall thickness
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
211
Rentals
Safety
OnSite
Supply
HDPE (Plastic)
Wall Sleeves
Abrasives
Infinity®
Fasteners
Klo-Shure
Anchors
Klo-Shure Couplings
currently support tubing from 1/4” to 4-1/8”
diameter.
Klo-Shure Couplings
currently can be used to
secure insulation from
3/8” to 1” thick.
Klo-Shure Couplings are pre-scored
and can be opened for placement
around tubing.
Strut
Threaded
Rod
Standard Klo-Shure
coupling for use with
clevis hangers.
Pipe
Hangers
Tools
•
•
•
•
•
•
•
•
Installs in seconds!
One piece design
Supports tubing and secures insulation
Eliminates insulation compression
No metal clamps
Superior vapor barrier
Improved finish - no tape, no glue
Meets the 25/50 flame spread / smoke
developed index
Strut-mounted Klo-Shure
Coupling supplied with two
clamp halves,
fastener, and locknut.
8 Series
New Klo-Shure 8
Series, Our clampless
insulation coupling
Accomodates elastomeric and fiberglass
tubing insulation up
to 1” thick
Abrasives
8 Series
P/N
Tube
1/2" Insulation O.D.
7 Series
2 Piece
Klo-Shure System
OnSite
Supply
Safety
• 7 series clamps come
complete with strap and
insert (2 pieces)
• Sized for O.D. tubing
1/4" - 4-1/8"
• Insulation wall thickness
3/8" - 1/2" - 3/4" - 1"
Ideal for securing tubing
insulation at strut-
mounted clamps
Rentals
212
Boston , MA
800-645-6155
1/2"
5/8"
7/8"
1-1/8"
1-3/7"
1-5/8"
2-1/8"
1/2" x 1/2"
5/8" x 1/2"
7/8" x 1/2"
1-1/8" x 1/2"
1-3/8" x 1/2"
1-5/8" x 1/2"
2-1/8" x 1/2"
5/8"
7/8"
1-1/8"
1-3/7"
5/8" x 3/4"
7/8" x 3/4"
1-1/8" x 3/4"
1-3/8" x 3/4"
7/8"
1-1/8"
1-3/7"
1-5/8"
2-1/8"
7/8" x 1"
1-1/8" x 1"
1-3/8" x 1"
1-5/8" x 1"
2-1/8" x 1"
3/4" Insulation
826062
826087
826112
826137
1" Insulation
Hartford, CT
800-969-0285
824050
824062
824087
824112
824137
824162
824212
Description
828087
828112
828137
828162
828212
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
The Sumner System
Strut
Anchors
• Pre-packaged to reduce expensive
hunting time
• Controls expansion and contraction
• Improves quality and productivity
• Noise dampening
• Electrolytic isolation
Stakfix
The Stakfix is used strictly inside of the chase
and attaches to 1-3/8” 6-5/8” pipe vents or
stacks by means of a stainless steel band
similar to the Pipefix.
The posifix is the smallest support
particularly designed to fit between
studs. Its application is to align and
support hot and cold lines with waste
piping in a lavatory or sink rough-in.
The Posifix is pre-slotted to hold 1/2”
or 3/4” supply pipe 4” 6” or 8” apart.
The unit mounts on 1” through 1-1/2”
waste pipe for perfect alignment.
Similar to the Posifix, the Pipefix
can be used in lavatory or sink
rough-ins. The Pipefix application
also is similar to the Posifix in
that it holes and aligns 1/2” and
3/4”’ supply lines with pipes,
particularly in tight application.
Stud Guard Fig. 240
Materials: Pregalvanized low carbon
steel
Ordering: Specify size
and figure number
For wood only.
Size Std. Pkg. Wt./Each per CWT
18 ga x 3 x 1-1/2 100 6.5
18 ga x 5 x 1-1/2 100 10.0
18 ga x 6 x 1-1/2 100 13.0
Nail Plate
Two 1.2” - 3/4” clamps, one 1” 1/2” clamp, and attaching screws.
Boca Safety Plate
Materials: Pre-galvanized low
carbon steel
Ordering: Specify size and figure
number
Philadelphia, PA
610-647-8070
One 7” Quik-Lok stainless steel
band, two 1/2” - 3/4” clamps and
attaching screws.
A 501 - Yellow Polystyrene
50 units/ctn
Fig. 241
Size
18 ga x 3 x 1-1/2
18 ga x 5 x 1-1/2
18 ga x 6 x 1-1/2
Standard unit includes
Standard unit includes
Std. Pkg.
200
200
200
For metal or wood
- screw to steel or
wood stud.
Wt./Each per CWT
6.0
9.0
11.0
Washington D.C.
877-419-2755
A 503 - Yellow Polystyrene
50 units/ctn
OnSite
Supply
A 502 - Yellow Polystyrene
50 units/ctn
Material: Carbon Steel
Finish: Pre-galvanized
Fig. 242G, 242GSN
Part Size Wgt
Number Gauge (W x L) Style Each
242G 16 5 x 8 Regular (Holes) 0.70
242GSN 16 5 x 8 Self Nailing 0.70
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
213
Safety
One 7” Quik-Lok stainless steel band,
three 1-1/2 “ clamps, attaching screws
and P-556 clips.
Tools
Pipefix
Abrasives
Posifix
Standard unit includes
Pipe
Hangers
Threaded
Rod
The Stakfix has three mounting surface for
supporting a combination of piping up to 1-1/2”
running vertically and/or horizontally.
Rentals
All 3 types of supports come in two different
materials:
Standard Yellow Polystyrene (A-500 Series)
Optional Orange ABS (A-600 Series)
All supports supplied in carton quantities of 50 units.
Fasteners
Nail PLates / Sumner / plumbing
Fasteners
HoldRite® / plumbing
Anchors
HOLDRITE STOUT BRACKET – #SB1, #SB2
Multi-purpose galvanized steel bracket supports various
application solutions
Strut
Model # Size
SB1
SB2
For Pipe Size(s) Box Qty
10” to 18” Various 50
13” to 25” Various 50
Threaded
Rod
HOLDRITE STOUT BRACKET – #SB1S, #SB2S
• Multi-purpose galvanized steel bracket supports various
application solutions
• Includes 4 screws
Pipe
Hangers
Model # Size
SB1S
SB2S
For Pipe Size(s) Box Qty
10” to 18” Various 50
13” to 25” Various 50
Tools
HOLDRITE STOUT BRACKET – #SB1-2502
#SB2-2502
• Multi-purpose galvanized steel bracket supports various
application solutions
• Includes (2) two HOLDRITE #250 clamps and 4 screws
Abrasives
Model # Size For Pipe Size(s) Box Qty
SB1-2502 10” to 18” 1/2” - 1” CTS 25
SB2-2502 13” to 25” 1/2” - 1” CTS 25
LOCKRITE - #601-20, #601-26
OnSite
Supply
• Ideal for lavatory, sink, and water closet stub-out support
• Galvanized steel bracket provides proper pipe positioning
and alignment
• Use in conjunction with #604 amd #605 glueable inserts
Model # Bracket Size For Pipe Size(s) Box Qty
Safety
601-20 20” 1/2”, 3/4” CTS 50
601-26 26” 1/2”, 3/4” CTS 50
Rentals
Not in the catalog?
Give us a call.
We are constantly adding new items to our inventory.
214
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
LOCKRITE - #604, #605
• Ideal for securing single Copper, PEX, CPVC
tubing to STOUT BRACKET
• Nylon clamps attach with a single fastener
• Flame rated per UL-94-V2
• Integration with the LOCKRITE #600 series brackets
• Inserts are lockable and glueable
• Inserts are grooved, creating a stronger glue joint
Model # Hole Needed For Pipe Size(s) Box Qty
Model # Size For Pipe Size(s) Box Qty
100
100
Strut
604 1” Diameter 1/2” CTS
605 1” Diameter 3/4” CTS
201 2-1/8” x 1-7/8” 1/2” CTS 50
202 2-1/8” x 2-7/8” 3/4” CTS 50
Fasteners
HOLDRITE PRO CLAMP - #201, #202
Anchors
HoldRite® Plumbing
HOLDRITE SUSPENSION CLAMPS - #221 - #226
• Ideal for Copper, PEX, and CPVC tubing
• Mounts directly on HOLDRITE STOUT BRACKET or other surfaces
Threaded
Rod
Model # Size For Pipe Size(s) Box Qty
221 1-7/8” x 1-1/2” 1/2” CTS 100
222 1-7/8” x 1-3/4” 3/4” CTS 100
223 2-3/8” x 2-1/8” 1” CTS 50
224 2-7/8” x 2-3/8” 1-1/4” CTS 25
225 2-7/8” x 2-3/4” 1-1/2” CTS 25
226 3-3/8” x 3-1/8” 2” CTS 25
Pipe
Hangers
HOLDRITE STANDARD CLAMPS - #231 - #236
• Ideal for Copper, PEX, and CPVC tubing
• Mounts directly on HOLDRITE STOUT BRACKET or other surfaces
Model # Size For Pipe Size(s) Box Qty
Tools
231 2-7/8” 1/2” CTS 100
232 2-3/8” x 2-1/8” 3/4” CTS 100
233 2-3/4” x 2-1/2” 1” CTS 50
234 2-3/4” x 1-3/4” 1-1/4” CTS 25
235 3-1/8” x 2 1-1/2” CTS 25
236 3-1/2” x 2-1/2” 2” CTS 25
• Ideal for thru-stud applications in metal framing (1-3/8” or 1-11/32”)
• Positioning & dissimilar metal isolation for Copper, PEX, and CPVC tubing
• Finger tabs allow for adjusting to off center punched holes in metal framing
Abrasives
HOLDRITE ISOLATORS - #414 - #416
Model # Hole Needed For Pipe Size(s) Box Qty
40-SWHP, #50-SWHP
• Suspended water heater platform with built in drain pan and 1” PVC drain
fitting
• Attaches to 3/8” or ½” all-thread rods
• Supports up to 50 gallon water heater or similar equipment (600 lbs.)
• Comes with cross braces for seismic requirements
Model # Size
40-SWHP
50-SWHP
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Box Qty Pallet Qty
21-1/4” x 2-1/2”, Up to 20 gal / 375 lbs 1
26-1/2” x 2-1/2”, Up to 50 gal / 600 lbs 1
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
HOLDRITE QUICK STAND - #
OnSite
Supply
1-3/8” Diameter 1/2” CTS 50
1-3/8” Diameter 3/4” CTS 50
1-3/8” Diameter 1” CTS 25
10
10
215
Rentals
414
415
416
Fasteners
Holdrite® plumbing
HOLDRITE #101-18, #101-26
Anchors
• Ideal for multiple applications including lavatory and water
closet
• Holes on 2” centers support ½” copper tubing
• Copper-bonded, heavy-gage steel bracket
Model # Size For Pipe Size(s) Box Qty
101-18 20” 1/2” CTS 50
101-26 26” 1/2” CTS 50
Strut
HOLDRITE #101-18-R, #101-26-R
Threaded
Rod
•
•
•
•
•
Ideal for lavatory and water closet
Extruded holes provide additional soldering surface
Ideal for copper bullets requiring a more rigid installation
Copper-bonded, steel bracket
5/8” holes on 2” centers (#101-26-R also has two 7/8” holes
on 8” centers)
Model # Size For Pipe Size(s) Box Qty
101-18-R 20” 1/2” CTS 25
101-26-R 26” 1/2”, 3/4” CTS 25
Pipe
Hangers
HOLDRITE #102-18, #102-26
• Ideal for water heater and relief line applications
• Copper-bonded, heavy-gage steel bracket
• Alternating 7/8” and 1-1/8” holes on 4” centers
Model # Size For Pipe Size(s) Box Qty
Tools
102-18 20” 3/4”, 1” CTS 50
102-26 26” 3/4”, 1” CTS 50
HOLDRITE #107-18, #107-26
Abrasives
• Ideal for multiple application such as lavatory, water closet and
water heater
• Copper-bonded, heavy-gage steel bracket
• Holes on 2” centers for ½” tubing and holes on 4” centers for ¾”
& 1” tubing
• #107-26 also has two holes for 1-1/4” tubing on 8” centers
Model # Size For Pipe Size(s) Box Qty
107-18 20” 1/2”, 3/4”, 1” CTS 50
107-26 26” 1/2”, 3/4”, 1”, 1-1/4” CTS 50
OnSite
Supply
HOLDRITE #114-C, #114-CO, #114-CR
Safety
• For 1” flush valve support on wall hung toilet carriers
• Copper-bonded, heavy-gage steel brackets mount directly to
4-bolt toilet carrier and position flush valve at height of 11-1/2”
above toilet
• Allows for rough-in prior to framing being erected
• 4-1/2” offset center line rough-in with #114-C and #114-CR
• #114-CO provides 4-3/4” off set rough-in (right or left hand)
• #114-CR allows for support of pre-capped stub out
Model # Size For Pipe Size(s) Box Qty
Rentals
114-C 23-1/4” x 2-1/2” 1” CTS 6
114-CO 23-1/4” x 2-1/2” 1” CTS 6
114-CR 23-1/4” x 2-1/2” 1” CTS 6
216
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
114-C
114-CR
114-CO
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Plumbing / Hangers
Anvil Model No. 327
Rod Size
Part No.
Black
Part No.
E.G.
3/8
1/2
37CHFPZ
50CHFPZ
180
180
Rod Size
Part No.
Black
Part No.
E.G.
3/8
1/2
37CSBC
50CSBC
300
560
Drive Screws
Anvil Model No. 43
Rod Size
Part No.
Black
12 x 1-1/2
12N150DRS
Pipe Size
Part No.
E.G.
Part No.
Copper
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
37DHSRZ
50DHSRZ
75DHSRZ
100DHSRZ
125DHSRZ
150DHSRZ
200DHSRZ
250DHSRZ
300DHSRZ
400DHSRZ
37DHSRK
50DHSRK
75DHSRK
100DHSRK
125DHSRK
150DHSRK
200DHSRK
250DHSRK
300DHSRK
400DHSRK
Threaded
Rod
“F & M” Hanger Flange
Wall Plate Malleable Iron
Pipe
Hangers
Side Beam Connector
Malleable Iron
Strut
“F+M” Split Ring
Hanger (Hinge Type)
CADDY® SUPERFIX 454
Split Ring Hanger
Rod Angle
Side Beam Attachment
300
560
900
900
•
•
•
Coach Screw Rods Hanger Bolts
Return Line Angles
Michigan Model No. 319
Rod Size
Part No.
Black
Max Load
(lb)
1
2
3
4
1NRLA
2NRLA
3NRLA
4NRLA
180
180
340
340
Philadelphia, PA
610-647-8070
Rod Size
Part No.
Rod Size
1/4 x 2
1/4 x 2-1/2
1/4 x 3
1/4 x 3-1/2
1/4 x 4
5/16 x 2-1/2
5/16 x 3
5/16 x 3-1/2
3/8 x 3
3/8 x 3-1/2
3/8 x 4
3/8 x 6
3/8 x 8
1/2 x 4
1/2 x 6
1/2 x 8
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Size Range: 1/4” through 4”
Electro-zinc plated
Has a fire rating DIN EN 13501-1:E
Conforms with (MSS) SP-58 and
SP-69 (Type 12)
• CAN BE USED ON COPPER
TUBING
Part
No.
Nom. Pipe Size Part
IP
CT
No.
Nom. Pipe Size
IP
CT
454001
454002
454003
454004
454005
454006
454007
454008
454009
1/4”
3/8”
-
1/2”
3/4”
1”
1-1/4”
1-1/2”
-
2”
-
2-1/2”
-
3
-
3-1/2”
4”
Hartford, CT
800-969-0285
3/8”
1/2”
5/8”
3/4”
1
1-1/4”
1-1/2”
2”
454010
454011
454012
454013
454014
454015
454016
454017
2-1/2”
3”
3-1/2”
4”
-
217
Abrasives
7/16
9/16
11/16
13/16
37DRAB
50DRAB
62DRAB
75DRAB
OnSite
Supply
1/4 Thick 3 x 3
1/4 Thick 4 x 4
Other Sizes available on request
3/8
1/2
5/8
3/4
Safety
Anvil Model No. 60
Max. Load
(lb)
Rentals
Square “Fish” Plates
Hole
Size
Tools
Anvil Model No. 206
Part No.
Rod Size Black
Fasteners
PLUMBING / HANGERS
Special U-Bolts
Standard U-Bolts
Anvil Model No. 137
Wire Pipe
Hook
Made to order:
Anchors
Specify all dimensions as
shown in standard U-Bolt
diagram
Pipe
Size
Rod
Size
Max Load
(lb)
Part No.
E.G.
1/2
1/4
435
50DUBOZ
3/4
1/4
435
75DUBOZ
Strut
1
1/4
435
100DUBOZ
1 1/4
3/8
1090
125DUBOZ
1 1/2
3/8
1090
150DUBOZ
2
3/8
1090
200DUBOZ
2 1/2
3/8
1090
250DUBOZ
Michigan Model No. 6
Sizes available 1/2”,
One Hole
Pipe Strap
3/4” and 1” Black or Copper
Light duty residential hanger
for water, waste or gas
Michigan Model No. 7
Threaded
Rod
3
1/2
2020
300DUBOZ
Size available 1/2” - 2”
3 1/2
1/2
2020
350DUBOZ
E.G. and Copper
4
1/2
2020
400DUBOZ
5
1/2
2020
500DUBOZ
6
5/8
3230
600DUBOZ
8
5/8
3230
800DUBOZ
10
3/4
4830
10IUBOZ
12
7/8
6730
12IUBOZ
J-Hook
Straight
Two Hole
Pipe Strap
Michigan Model No. 458
Sizes available 1/2” - 4”
Pipe
Hangers
Note: Order hex nuts separately
Size Range 1/2” - 36”
In stock up thru 12” larger sizes - ask for availability
Finishes available: • Black • PVC Coated • SS
Black and E.G.
Michigan Model No. 8
Size available 1/2” - 4”
“Return”
Line J-Hook
E. G. and copper
TAPCON
Tools
Fastening to block,
brick, or masonry
See Page 100
“Short”
2-Hole
Strap
Abrasives
Side Lock “J” Hanger
Michigan Model No. 457
Anvil Model No. 67
Anvil No. 262
Sizes available 1/2” - 4”
OnSite
Supply
Safety
Pipe Size
Part No.
(Electro-galvanized)
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
75DSLHZ
100DSLHZ
125DSLHZ
150DSLHZ
200DSLHZ
250DSLHZ
300DSLHZ
325DSLHZ
400DSLHZ
500DSLHZ
600DSLHZ
800DSLHZ
Sizes available in 1/2” -4”
Black - E.G. - H.D.G.
Black and E.G.
Supports pipe 1” off the wall
Riser Clamp for Plastic Pipe
Material: Carbon Steel
Finish: Plain, Electro-galvanized, plastic coated
Service: Designed for support of plastic DWV pipe
Rentals
Finishes available: • PVC Coated
218
Hartford, CT
800-969-0285
Empire No. 48
Boston , MA
800-645-6155
Pipe
Size
Pipe
OD
Max Rec Load
(lbs)
1 1/2
2
1.900
2.375
225
225
3
4
3.500
4.500
225
225
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Note: Also Available In EG
Also Available Black • E.G.
Part No.
E.G.
Special Rod Sizes 1-2 1/2” Available
By Special Order
Rod
Size
Max
Load
(lb)
Steel
Pin
Size
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
25CROCZ
37CROCZ
50CROCZ
62CROCZ
75CROCZ
87CROCZ
100CROCZ
112CROCZ
150CROCZ
7/8
1-1/8
1-1/4
2-1/8
2-1/4
2-1/2
2-3/4
3
3-1/8
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
610
1130
1810
2710
3770
4960
8000
11630
15700
20700
27200
33500
1/2
5/8
3/4
7/8
1
1-1/8
1-3/8
1-5/8
1-7/8
2-1/4
2-1/2
2-3/4
Rod Size
Max
Load (lb)
3/8
1/2
5/8
3/4
7/8
1200
2200
3500
5200
7200
Part No.
Black
Malleable
Extension Piece
Grinnell Model No. 157
Rod Couplings
Long Length
Grinnell Model No. 135E
Rod Size
Length
1-3/4
1-3/4
Weldless Eye Nuts
Note: Use With Malleable
“Ice Tong” Beam Clamp
Refer To Page No. 5-7 - Fig. 218
Grinnell Model No. 290
Note:
• Forged Steel • 3/8 - 2 1/2 Rod Size
Also Available Black • E.G
Also Available in E.G.
Part No.
E.G.
37C175RCLZ
50C175RCLZ
Reducing Rod Coupling
Rod Size
Max
Load (lb)
3/8
1/2
5/8
3/4
7/8
610
1130
1550
2100
2350
Part No.
Black
Eye Sockets
Pipe
Hangers
Rod Size
Length
Fasteners
Grinnell Model No. 299
Anchors
Grinnell Model No. 230
Strut
Forged Steel Clevis
Note: Cotter Pin Included
Michigan Model No. 255
3/8
1/2
Turnbuckle Body
Grinnell Model No. 110R
Note:
• Malleable Iron • 1/4 - 7/8 Rod Size
Also Available Black • E.G
Tools
Rod Couplings
Standard Length
Threaded
Rod
copper natick & van hangers / hardware attachments
Plain/Welded Eye Rods
Grinnell Model No. 135R
1/4 x 3/8
3/8 x 1/2
1/2 x 5/8
3/8” 240
2”
610
3 1/2” 1130
37C25RRCZ/B
50C37RRCZ/B
62C50RRCZ/B
Rod
Size
HS
Max. Load- Max. Load- Part No.
Plain
Welded
40 Black
3/8
1/2
5/8
3/4
7/8
1
240
440
705
1050
1470
1940
1/2
5/8
3/4
7/8
1
1-3/16
Copper Natick Hangers
Materials: pre-copper plated low carbon steel
Ordering: specify tube size - length - figure number
Std.
Pkg.
25
25
25
25
25
25
Philadelphia, PA
610-647-8070
Wt.
per 100
7.5/CWT
7.5
9.0
9.5
11.0
12.5
Tubing
Size
1/2 x 12
3/4 x 2
1 x 12
1-1/4 x 12
1-1/2 x 12
2 x 12
Std.
Pkg.
25
25
25
25
25
25
Washington D.C.
877-419-2755
610
1130
1810
2710
3770
4960
Copper Van Hanger
(Bell Type)
Fig. 127-CT
Tubing
Size
1/2 x 6
3/4 x 6
1 x 6
1-1/4 x 6
1-1/2 x 6
2 x 6
Part No.
40W Black
OnSite
Supply
Max.
Load Part No.
(lb)
E.G.
Wt.
per 100
13.0/CWT
13.0
14.0
15.0
16.0
17.0
Fig. 129-CT
Materials: Pre-copper plated low carbon steel
Ordering: Specify tube size and figure number
Tubing
Size
1/2
3/4
1
Boston , MA
800-645-6155
Std.
Pkg.
25
25
25
Wt.
per 100
7.0/CWT
7.5
7.5
Tubing
Size
1-1/4
1-1/2
2
Hartford, CT
800-969-0285
Std.
Pkg.
25
25
25
Wt.
per 100
8.0/CWT
10.0
11.5
219
Safety
Max.
Pipe
Size
Rentals
Size
Abrasives
Michigan Model No. 40 - Plain - No. 40W - Welded
Fasteners
BANG-IT™ / WOOD-KNOCKER™ / HOLLOW SET DROP-IN
Anchors
Bang-It™
Wood-Knocker™
Cast-in-Place Inserts
Cast-in-Place Inserts
Strut
Drill the metal pan deck and simply step on the
Bang-It. The insert will click into place and fit
securely with the deck. After installation, the
inserts are ready for the pour. When the concrete
is cured the insert is ready to receive rod.
Wood-Knockers are simply hammered into the
wood forms. The concrete is then poured. After
the concrete cures the forms are stripped away,
the underside of the insert is exposed and
ready to receive rod.
Bang-ItTM Product Offering
Wood-KnockerTM Product Offering
Threaded
Rod
Part
No. Description Color
Pre-Drilled
Hole
Std
Box
Pallet
Qty.
7540
7542
7544
7546
7548
7549
13/16
13/16
13/16
1-3/16
1-3/16
1-3/16
100
100
100
50
50
50
4,000
4,000
4,000
2,400
2,400
2,400
1/4
3/8
1/2
5/8
3/4
7/8
Brown
Green
Yellow
Red
Purple
Black
Part No.
Description
Color
Std. Box
Pallet Qty.
7550
7552
7554
7556
7558
1/4
3/8
1/2
5/8
3/4
Brown
Green
Yellow
Red
Purple
200
200
200
150
150
9,600
9,600
9,600
6,000
6,000
A coil thread design is available for Bang-It and Wood-Knocker upon request in 1/2” and 3/4” sizes for forming applications.
Pipe
Hangers
Accessories
Part No.
Tools
7560
7562
7564
7566
Description
Quantity
per Box
Bang-It Deck Driller
13/16” Carbide Hole Saw for 1/4", 3/8" and 1/2"
1-3/16” Carbide Hole Saw for 5/8", 3/4" and 7/8"
Carbide Hole Saw Center Bit
1
1
1
1
Threaded inserts are color coded to easily identify
location and diameter of the internally threaded coupling,
allowing multiple trades on the same job to suspend their
systems with various size steel threaded rods.
Hollow Set Drop-In
SDS -Bit
Abrasives
The Hollow Set Drop-In anchor is designed for anchoring in
hollow base materials such as hollow concrete block, brick with
weep holes, and hollow core pre-cast concrete plank. It can also
be used in solid base materials.
OnSite
Supply
Part No.
CS
SS
Anchor Drill Overall Sleeve Std. Std. Wt./
Size
Dia. Length Length Box Ctn. 100
9320
9330
9340
9350
9360
1/4
5/16
3/8
1/2
5/8
Safety
Setting Tools
9420
-
9440
-
-
3/8
5/8
5/8
3/4
1
7/8
1-5/16
1-5/16
1-3/4
2
5/8
15/16
15/16
1-1/4
1-1/2
100
100
100
100
100
1000 1-3/4
500 5-1/2
500 5-1/2
100 9-1/2
100 21
Anchor
1/4”
5/16”
3/8”
1/2”
5/8”
Hollow Tool
Solid Tool
9323
9322
9333
9332
9343
9342
9353
9352
9363
9362
Rentals
220
Hartford, CT
800-969-0285
Drill Bits
for DropIns and
Mini
Drop-Ins
Don’t
overdrill
Part No.
207STP-6-17
207STP-8-27
207STP-10-33
Part No.
207STP-10-19
207STP-8-13
Boston , MA
800-645-6155
Standard Drop-In Anchors
3/8" x 1-1/16" Carbide Stop-Bit
for 1/4" Standard Drop-in anchors
1/2" x 1-11/16" Carbide Stop-Bit
for 3/8" Standard Drop-in anchors
5/8" x 2-1/16" Carbide Stop-Bit
for 1/2" Standard Drop-in anchors
Mini Drop-In Anchors
5/8" x 1-3/16" Carbide Stop-Bit
for 1/2" Mini Drop-in anchors
1/2" x 13/16" Carbide Stop-Bit
for 3/8" Mini-Drop-in anchors
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1/4
3/8
1/2
5/8
3/4
3/8
1/2
5/8
3/4
1
25CDIAZ
37CDIAZ
50CDIAZ
62CDIAZ
75CDIAZ
Also available in copper
*UL and FM Approved Thread
Tapped per NFPA
Pipe Size
Part No. E.G.
Thread Tap* Max.Load
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
50 DSPRZ
75 DSPRZ
100 DSPRZ
125 DSPRZ
150 DSPRZ
200 DSPRZ
250 DSPRZ
300 DSPRZ
350 DSPRZ
400 DSPRZ
500 DSPRZ
600 DSPRZ
800 DSPRZ
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Part
No.
Rod/Anchor Drill
Dia.
Dia.
6335
6322
6337
1/4"
3/8"
1/2"
Setting Tools
Part No.:
Anchor Size:
5/8"
3/4"
1"
Overall
Length
Thread
Depth
Std.
Box
5/8"
3/4"
1"
5/8"
3/4"
1"
100
50
50
6336
1/4"
6323
3/8"
6338
1/2"
Rod Size
Length
Part No.
E.G.
1/4
3/8
1/2
5/8
3/4
7/8
1-1/8
1-1/4
2-1/8
2-1/4
25CROCZ
37CROCZ
50CROCZ
62CROCZ
75CROCZ
Tools
Rod Coupling - Standard
Abrasives
300
300
300
300
300
300
525
525
585
650
1000
1000
1000
Threaded Rod - 6’ Length
Junior Top Beam Clamps
Malleable Iron - 3/4” Opening
Anvil Model No. 92
Size
Part No.
Black
Part No.
E.G.
3/8
1/2
5/8
7/8
37CJTB
50CJTB
62CJTB
87CJTB
37CJTBZ
50CJTBZ
62CJTBZ
87CJTBZ
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Length
1/4 x 6
3/8 x 6
1/2 x 6
5/8 x 6
3/4 x 6
7/8 x 6
1 x 6
ft
ft
ft
ft
ft
ft
ft
Part No.
Black
Part No.
E.G.
25C600THR
37C600THR
50C600THR
62C600THR
75C600THR
87C600THR
100C600THR
25C600THRZ
37C600THRZ
50C600THRZ
62C600THRZ
75C600THRZ
87C600THRZ
100C600THRZ
Safety
Size
Notes:
• Threaded Rod in stock up to 2” in diameter
• THREADED ROD IN STOCK
IN 10 FT. AND 12 FT. LENGTHS
• Fully threaded studs cut to length available on demand
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
221
Rentals
Anvil Model No. 69
Mini Dropin™
Threaded
Rod
Part No.
E.G.
Pipe
Hangers
Drill
Dia.
OnSite
Supply
Size
Strut
Drop In Anchors
“Emlok”
Sprinkler Rings
Fasteners
Anchors
FIRE / SPRINKLER / PLUMBING
Fasteners
fire / sprinkler - Sammy xpress®
Features and Benefits
Anchors
SAMMY'S
Threaded Rod Hangers
General Application & Uses
Strut
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
• One system for all rod hanging ap-
• Sidewinders are the side mount versions of the Sammys.
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are selfdrilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjustable torque, battery-powered screw
gun or hammer drill.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base
Steel Purlins & Beams,
Materials: Wood, Concrete
Vertical Applications
Threaded
Rod
SAMMY'S
SAMMY'S
Pipe
Hangers
Model GST Wood Vertical Hangers
Model DST, DSTR & TEK Steel Vertical Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
DST - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Tools
Abrasives
GST .750
GST 100
GST 200
GST 300
GST 600
GST .75
GST 10
GST 20
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
GST 25-380 3/8"
3/8"
GST 30
3/8"
GST 40
GST 60
3/8"
GST 2
1/2"
GST 2.5-380 1/2"
GST 3
1/2"
GST 4
1/2"
GST 6
1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/4"
#14
1"
#14
2"
#14
3"
#14
6"
#14
3/4"
#14
1"
#14
2"
#14
2-1/2" #14
#14
3"
#14
4"
6"
#14
2"
#14SW
2-1/2" #14SW
3"
#14SW
4"
#14SW
6"
#14SW
—
—
—
—
—
—
—
UL, FM, NFPA
UL, NFPA
UL, FM, NFPA
NFPA
NFPA
—
—
—
—
—
Packaged 25 per box.
Model No.
Rod
Dia.
Screw Shank Nut
Size & Length Driver Approvals
OnSite
Supply
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank
Nut
Model No. Dia. Size & Length Driver Approvals
DSTR 100 1/4"
DST 100
1/4"
1/4"
DST 150
1/4"
DST 200
DST 250
1/4"
DST 300
1/4"
TEK 500
1/4"
DSTR 1-1/2" 3/8"
DSTR 1"
3/8"
DSTR 516 3/8"
3/8"
DST 10
3/8"
DST 15
DST 20
3/8"
3/8"
DST 25
DST 30
3/8"
DST 516
3/8"
TEK 50
3/8"
DST 2.0
1/2"
DST 2.5
1/2"
DSTR 1.0 1/2"
DSTR 5.16 1/2"
DST 5.16 1/2"
TEK 5.0
1/2"
CST 200
CST 20
CST 2
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty
status. Please see page 97 for ordering information
SAMMY'S
Model CST Concrete Vertical Hangers
Safety
Rentals
222
1/4"
3/8"
1/2"
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14
5/16" x 1-1/2" #14SW
Hartford, CT
800-969-0285
—
FM
—
Boston , MA
800-645-6155
#14
1/4-20 x 1"
—
1/4-14 x 1"
#14
—
1/4-14 x 1-1/2" #14
—
1/4-14 x 2"
#14
—
1/4-12 x 2-1/2" #14
—
1/4-14 x 3"
#14
—
12-24 x 1-1/2" #14
—
12-24 x 1-1/2" #14 UL, FM, NFPA
#14 UL, FM, NFPA
1/4-20 x 1"
5/16"-18 x 1-1/4" #14 UL, NFPA
#14 NFPA
1/4-14 x 1"
1/4-12 x 1-1/2" #14 NFPA
1/4-14 x 2"
#14 NFPA
1/4-14 x 2-1/2" #14 NFPA
1/4-14 x 3"
#14 NFPA
5/16"-18 x 1-1/4" #14 UL, NFPA
12-24 x 1-1/2"
#14 FM, NFPA
1/4-14 x 2"
#14SW
—
1/4-14 x 2-1/2" #14SW
—
1/4-20 x 1"
#14SW
—
5/16"-18 x 1-1/4" #14SW
—
5/16"-18 x 1-1/4" #14SW
—
12-24 x 1-1/2" #14SW
—
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SWG 10
SWG 20
3/8"
3/8"
SWG 25-380 3/8"
SWG 30
3/8"
#14SW
#14SW
—
—
1/4"
1/4"
3/8"
1/4"
#14SW
#14SW
#14SW
#14SW
—
NFPA
NFPA
—
x
x
x
x
1"
2"
2-1/2"
3"
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄ 16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Model No.
Rod Screw Shank
Dia. Size & Length
Approvals
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
NFPA
NFPA
NFPA
NFPA
UL, NFPA
UL, NFPA
UL, NFPA
NFPA
SWD 10
SWD 15
SWD 20
SWD 516
SWDR 1-1/2"
SWDR 1"
SWDR 516
SWT 15
1/4-14 x 1"
1/4-14 x 1-1/2"
1/4-14 x 2
5/16-18 x 1-1/4"
1/4-20 x 1"
1/4-20 x 1-1/2"
5/16-18 x 1-1/4"
12-24 X 1-1/2"
17°
Deflection
From
Vertical
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Model No.
SH-GST 20
SH-GST 22SS
SH
-GST 30
SH-GST 30SS
8113910
Rod
Dia.
Material
Screw Shank
Size & Length
1/4"
1/4"
1/4"
1/4"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
Zinc Plated Steel 3/8"
Stainless Steel
3/8"
#14 (Black) Nut Driver
x
x
x
x
2"
2"
3"
3"
17°
Deflection
From
Vertical
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Model No.
Rod
Dia.
Material
Screw Shank
Size & Length
1/4" x 1"
1/4" x 1"
Zinc Plated Steel 3/8"
SH-DSTR 1
3/8"
SH-DSTR 1-SS Stainless Steel
8113910 #14 (Black) Nut Driver
For Wood and Concrete
89°
Deflection
From
Vertical
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Model No.
Rod
Dia.
Screw Shank Nut
Size & Length Driver Approvals
8017925
SWC 200
SWC 20
1/2"
1/4"
3/8"
1/4" x 6"
#14SW
5/16" x 1-1/2" #14SW
5/16" x 1-1/2" #14SW
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
—
—
NFPA
Threaded
Rod
1/4" x 1"
1/4" x 2"
Pipe
Hangers
SWG 100 1/4"
SWG 200 1/4"
Screw Shank Nut
Size & Length Driver Approvals
Tools
Rod
Dia.
Abrasives
Model No.
Model No.
SH-GST/CST 20
SH-GST/CST 2.0
8273910
3/8"
1/4" x 1-3/4"
1/2"
1/4" x 1-3/4"
#14SH Orange Nut Driver
Rod
Dia.
Screw Shank
Size & Length
Complete technical specifications are available:
Contact your Sales Person or Customer Service for
more information, including Sammys® products tested
for seismic restraint
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
223
OnSite
Supply
Self-threading into wood. No pre-drilling required. 25/box
Safety
Model SWG Wood SIDEWINDERS™ Hangers
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
Rentals
SAMMY'S
Anchors
Swivel Head™
SAMMY'S Hangers
Strut
Sammys™ Sidewinders™
Fasteners
fire / sprinkler - Sammy xpress®
Fasteners
fire / sprinkler - Sammy xpress®
Anchors
SAMMY XPress™ Sidewinder Hangers
SAMMY Xpress
installation sequence
Strut
Threaded
Rod
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal attachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY Xpress
Universal Tool
SAMMY XPress™ Hangers
Pipe
Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Tools
Model
No.
Rod Screw Shank
Gauge Dia. Size & Length
XP 20
XP 35
XPIT
XPDB
22-20 3/8" 1/4-20 x 1-1/8"
UL, NFPA
18-16 3/8" 1/4-20 x 1-1/8"
UL, NFPA
Sammy X-Press Universal Installation Tool
25/34" Drill Bit
Model
No.
Rod
Gauge Dia.
SWXP
XPIT
16-12 3/8" 1/4-20 x 1-1/8"
UL
Sammy X-Press Universal Installation Tool
Screw Shank
Size & Length
Approvals
Approvals
Swivels up to 89°
Abrasives
SH-TEK 50
™
SAMMY'S Swivel Head
Hangers
Metal Deck, Min 22 ga.
Tested to Zone 4 Seismic Requirements
OnSite
Supply
Safety
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material engagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod
Screw Shank
Part No.
Dia.
Size & Length
Rentals
8268957
8270957
8273910
224
3/8"
12-24 x 1-5/8"
1/2"
12-24 x 1-5/8"
#14SH Orange Nut Driver
Hartford, CT
800-969-0285
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the installed fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Receiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Approvals
UL
UL
Part
No.
8294922
8295922
8272957
8271957
XPIT
Boston , MA
800-645-6155
Rod
Dia.
Pipe
Size
Gauge
Test
Load
3/8"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
1/2"
3/4" - 2"
22 - 20
750 lbs.
3/8" 3/4" - 3.5"
16 - 12
1250 lbs.
Sammy X-Press Universal Installation Tool
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SAMMY'S Nut Drivers
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
• #14 (Black) Nut Driver, for use with SAMMYS™ & Swivel Head™ SAMMYS™. (See
individual SAMMY'S Listing for correct
Nut Driver).
8195910
Retro Socket for
8151910 (Old Tool)
8152910
25/64" Drill Bit
Part No.
8113910
#14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with
Sidewinders and 1/2" rod SAMMY'S. (See
individual SAMMY'S Listing for correct
Nut Driver).
Part No.
Speedy Pole Tool™ & Socket
8114910
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Universal Installation Kit
#14SW
Speedy Pole Tool 6' (3' - 6')
Speedy Pole Tool 12' (4' - 12')
Speedy Pole Tool 18' (6' - 18')
Speedy Pole Tool 24' (8' - 24')
SAMMYS™ Socket Driver
Ceiling Wire Socket Driver
Model No.
SPE139 Universal Installation Kit
VertigoTM Fastening System
Thread Style Box
Carton
7171
7173
7175
WB thread
WB thread
WB thread
500
500
250
1/4
3/8
1/2
1/4 x 1-1/4
1/4 x 1-1/2
3/8 x 2-3/4
100
100
50
Steel Side Hanger
Point
Style Box
1/4-20 x 1
No. 3
1/4-20 x 1 (with nuts)
No. 3
1/4-20 x 1-1/2 (with nuts) No. 3
1/4-20 x 2 (with nuts)
No. 3
Carton
100
100
100
100
500
500
500
500
12-24 x 1-1/2
No. 5 100
12-24 x 1-1/2 (with nuts) No. 5 100
500
500
Philadelphia, PA
610-647-8070
Box
Carton
7185
7205
7170
7156
100
100
100
100
500
500
500
500
1/4
3/8
3/8
3/8
1/4 x 1
1/4 x 1
1/4 x 2
3/8 x 2-1/2
Type 17
Type 17
Type 17
Type 17
Accessories
Rod Screw Shank
Part No. Size Size & Length
No. 3 for Purlins
7183
1/4
7184
3/8
7186
3/8
7188
3/8
No. 5 for Beams
7200
1/4
7201
3/8
Screw Shank Point
Part No. Rod Size Size & Length Style
OnSite
Supply
Screw Shank
Part No. Rod Size Size & Length
Washington D.C.
877-419-2755
Abrasives
Wood Side Hanger
Concrete Vertical Hanger
Part No. Description
Color
Box
Carton
Nut Driver Socket
7187
Universal Steel and Wood Socket
7195
1/4” concrete socket
7197
3/8” concrete socket
7198
1/2” concrete socket
Red
Blue
Blue
Blue
5
5
5
5
25
25
25
25
Safety
130
131
132
133
138
3004
#14SW (Red) Nut Driver
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
Model No.
#14
Pipe
Hangers
UXPIT Universal
X-Press It Tool
Tools
8194910
Strut
See page 98 for full information
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
225
Rentals
Part No.
Anchors
SAMMY'S X-Press It®
Universal Installation Tool
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes
into contact with the material you are installing
into, continue drilling until nut driver spins free.
Installation is then complete.
Threaded
Rod
See pages 94-97 for full information
Fasteners
fire / sprinkler - Sammy xpress® / VERTIGO™
Fasteners
tolco seismic
Pipe Clamp for Sway Bracing - Fig 4A
∙∙ Carbon steel construction. Braces pipe
against sway and seismic disturbances.
∙∙ Available for 4" through 8" pipe.
∙∙ Stock: Plain finish (PLN).
∙∙ Special Order: Electro-Galvanized, HDG finish or Stainless Steel, call for availability.
Anchors
Seismic Bracing
Fully Engineered System
Part No
TOLCO 4A-4-PLN
TOLCO 4A-5-PLN
TOLCO 4A-6-PLN
TOLCO 4A-8-PLN
Strut
Seismic and Vibration /
Isolation Products
Call for details
Std Pkg
Pipe Size
4" . . . . . . . . . . . . . . . 10
5" . . . . . . . . . . . . . . . 10
6" . . . . . . . . . . . . . . . 10
8" . . . . . . . . . . . . . . . 5
Fast Attach - Universal Sway
Brace Attachment - Fig 981
Threaded
Rod
∙∙ Size Range — One size fits bracing pipe 1”
thru 2”, TOLCO 12 gauge channel, and all
structural steel up to 1/4” thick.
4-Way Longitudinal Sway Brace Attachment
Fig 907
Pipe
Hangers
∙∙ Carbon steel construction.
∙∙ For bracing pipe against sway and seismic disturbances.
∙∙ Functions as a longitudinal brace connection when attached to
a lateral brace pipe.
∙∙ Stock: Plain finish (PLN).
∙∙ Special Order: Electro-Galvanized or HDG
finish, call for availability. Sold individually.
Braced Pipe/Bracing Pipe
Part No
Size
TOLCO # 907-
TOLCO # 907-
TOLCO # 907-
1x1-PLN
1x1-1.75-PLN
1x1-1.75-PLN
Tools
Abrasives
∙∙ Secure channel to hanger rod for vertical
seismic bracing.
∙∙ Stock: Electro-Galvanized (EG) steel.
∙∙ Special Order: HDG finish or Stainless Steel,
call for availability.
Part No
TOLCO98-EG
Bar Joist Sway Brace
Attachment - Fig 825
∙∙ Size Range — One size accommodates all
TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load
2015 lbs.
∙∙ Function — To attach sway bracing and
hanger assemblies to steel open web structural members.
Bar Joist Sway Brace Attachment - Fig 825A
Rod Stiffener - Fig 98
∙∙ Function — Multi-functional attachment to
hanger rod, trapeze rod, structure or braced
pipe fitting.
∙∙ Size Range — One size accommodates all
TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load
1265 lbs.
∙∙ Function — To attach sway bracing to steel
open web structural members.
Std Pkg
. . . . . . . . . . . . . . . . . . . 100
OnSite
Supply
Retaining Straps - Fig 69, 69R
Surge Restrainer - Fig 25
Safety
∙∙ Steel construction.
∙∙ Designed to restrict the upward movement of
piping occuring during sprinkler head activation or seismic activity.
∙∙ For use with ¾" to 2" steel or PVC pipe.
∙∙ Stock: Pre-galvanized finish.
Part No
TOLCO #25
Rentals
226
Std Pkg
. . . . . . . . . . . . . . . . . . . . . . . . 10
Hartford, CT
800-969-0285
#69R - Retrofit Strap
Boston , MA
800-645-6155
#69 - Retaining Strap
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part No
TOLCO 990-
TOLCO 990-
TOLCO 990-
TOLCO 990-
∙∙ Multi-functional attachment to structure or braced pipe fitting.
∙∙ One size fits bracing pipe 1" through
2" diameter, 12 gauge channel and
all structural steel up to ¼" thick.
∙∙ Carbon steel construction.
∙∙ Stock: Plain (PLN) or Electro-Galvanized (EG) finish.
Cable/Rod
Size
Std Pkg
1/4 x 3/4-PGL . . . . . . 10
1/8 x 3/8-PGL . . . . . . 25
3/16 x 1/2-PGL . . . . . 10
3/16 x 5/8-PGL . . . . . 10
Part No
Std Pkg
TOLCO 980-PLN . . . . . . . . . . . . . . . . 25
TOLCO 980-EG . . . . . . . . . . . . . . . . 25
Fast Clamp Sway Brace Attachment - Fig 100000
Sway Brace Attachment - Fig 1001
Fast Attach — Cable Sway Brace Attachment
Fig 991
∙∙ Attaches sway brace to hanger rod.
∙∙ To be used with 7 x 19 strand core
pre-stretched galvanized aircraft cable.
∙∙ Size range: 1∕8", 3∕16" and ¼" cable.
Fits 3∕8" through ¾" hanger rod bolt.
Stock: Electro-Galvanized (EG) finish.
Part No
TOLCO 991-
TOLCO 991-
TOLCO 991-
TOLCO 991-
TOLCO 991-
Cable/Rod
Size
25
25
10
10
10
Braced Pipe/Bracing Pipe
Part No
Size
Std Pkg
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
1-1/2 x 1-PLN . . . . . . . . . . . .
2 x 1-PLN . . . . . . . . . . . . . . . .
2-1/2 x 1-PLN . . . . . . . . . . . .
2-1/2 x 1-1/4-PLN . . . . . . . . .
3 x 1-PLN . . . . . . . . . . . . . . . .
3 x 1-1/4-PLN . . . . . . . . . . . .
4 x 1-PLN . . . . . . . . . . . . . . . .
4 x 1-1/4-PLN . . . . . . . . . . . .
6 x 1-PLN . . . . . . . . . . . . . . . .
6 x 1-1/4-PLN . . . . . . . . . . . .
25
25
20
20
20
20
20
20
10
10
No-Thread Swivel Sway Brace
Attachment - Fig 909
∙∙ The structural component of a sway and
seismic bracing system.
∙∙ Designed for 1" bracing pipe. For brace
pipe sizes larger than 1" use TOLCO 980.
∙∙ Carbon steel construction.
∙∙ Stock: Electro-Galvanized finish (EG).
∙∙ Special Order: Plain or HDG finish, call
for availability.
Std Pkg
1/8 x 3/8-PGL . . . . . . .
1/8 x 1/2-PGL . . . . . . .
3/16 x 1/2-PGL . . . . . .
3/16 x 5/8-PGL . . . . . .
1/4 x 3/4-PGL . . . . . . .
Tools
2-1/2 x 1-PLN . . . . . .20
2-1/2 x 1-1/4-PLN . . 20
3 x 1-PLN . . . . . . . . . 10
3 x 1-1/4-PLN . . . . . .10
4 x 1-PLN . . . . . . . . . 10
4 x 1-1/4-PLN . . . . . .10
6 x 1-PLN . . . . . . . . . 10
6 x 1-1/4-PLN . . . . . .10
8 x 1-PLN . . . . . . . . . 10
Abrasives
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
TOLCO 1001-
OnSite
Supply
Braced Pipe/Bracing Pipe
Part No
Size
Std Pkg
Part No
Safety
Pipe
Hangers
∙∙ Carbon steel construction.
∙∙ Braces pipe against sway and seismic disturbances.
∙∙ Available for 1" through 6" pipe
Schedule 10 through 40 IPS.
∙∙ Accomodates 1" through 1¼" Schedule 40 IPS pipe for bracing.
∙∙ Approved for use (UL) to brace Schedule 7 sprinkler pipe up to 4".
∙∙ Stock: Plain finish (PLN).
∙∙ Special Order: Electro-Galvanized,
HDG finish or Stainless Steel, call
for availability.
∙∙ Carbon steel construction.
∙∙ Braces pipe against sway & seismic disturbances.
∙∙ Available for 2½" thru 8" pipe.
∙∙ Accomodates 1" thru 1¼" Schedule 40 IPS
pipe for bracing.
∙∙ Stock: Plain finish (PLN).
∙∙ Special Order: Electro-Galvanized
or HDG finish, call for availability.
Fasteners
Strut
∙∙ Attaches sway brace to structure or hanger.
∙∙ To be used with 7 x 19 strand core prestretched galvanized aircraft cable.
∙∙ Size range: 1∕8", 3∕16" and ¼" cable. ¼"
thru 1" hanger rod or fastener.
∙∙ Mounts to any surface angle.
∙∙ Stock: Electro-Galvanized (EG) finish.
Universal Swivel Sway Brace Attachment
Fig 980
Threaded
Rod
Cable Sway Brace Attachment - Fig 990
Anchors
tolco seismic
Std Pkg
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
227
Rentals
TOLCO # 909-EG . . . . . . . . . . . . . . . 25
Fasteners
seismic bracing
Rigid Component Bracing System -
Utilizing Strut Channel and Strut Fittings and Accessories
Anchors
Seismic Bracing
Clevis Hanger Transverse Rigid Bracing
1/2” through 24” Pipe Size
Full Engineering
Services Provided
Strut
Transverse Rigid Bracing
for Rectangular Duct
Threaded
Rod
Pipe
Hangers
Tools
Fast Clamp Sway Brace Attachment - Fig 100000
Abrasives
∙∙ Carbon steel construction.
∙∙ Braces pipe against sway and seismic disturbances.
∙∙ Available for 1" through 6" pipe
Schedule 10 through 40 IPS.
∙∙ Accomodates 1" through 1¼" Schedule 40 IPS pipe for bracing.
∙∙ Approved for use (UL) to brace Schedule 7 sprinkler pipe up to 4".
∙∙ Stock: Plain finish (PLN).
∙∙ Special Order: Electro-Galvanized,
HDG finish or Stainless Steel, call
for availability.
OnSite
Supply
∙∙ Size Range — One size fits bracing pipe 1”
thru 2”, TOLCO 12 gauge channel, and all
structural steel up to 1/4” thick.
∙∙ Function — Multi-functional attachment to
hanger rod, trapeze rod, structure or braced
pipe fitting.
Braced Pipe/Bracing Pipe
Part No
Size
Std Pkg
Safety
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
TOLCO 1000-
Rentals
228
1-1/2 x 1-PLN . . . . . . . . . . . .
2 x 1-PLN . . . . . . . . . . . . . . . .
2-1/2 x 1-PLN . . . . . . . . . . . .
2-1/2 x 1-1/4-PLN . . . . . . . . .
3 x 1-PLN . . . . . . . . . . . . . . . .
3 x 1-1/4-PLN . . . . . . . . . . . .
4 x 1-PLN . . . . . . . . . . . . . . . .
4 x 1-1/4-PLN . . . . . . . . . . . .
6 x 1-PLN . . . . . . . . . . . . . . . .
6 x 1-1/4-PLN . . . . . . . . . . . .
Fast Attach - Universal Sway
Brace Attachment - Fig 981
25
25
20
20
20
20
20
20
10
10
Hartford, CT
800-969-0285
Universal Swivel Sway Brace Attachment
Fig 980
∙∙ Multi-functional attachment to structure or braced pipe fitting.
∙∙ One size fits bracing pipe 1" through
2" diameter, 12 gauge channel and
all structural steel up to ¼" thick.
∙∙ Carbon steel construction.
∙∙ Stock: Plain (PLN) or Electro-Galvanized (EG) finish.
Part No
Std Pkg
TOLCO 980-PLN . . . . . . . . . . . . . . . . 25
TOLCO 980-EG . . . . . . . . . . . . . . . . 25
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Wire Rope System -
Fasteners
seismic bracing / wire rope
Anchors
Utilizing Galvanized Wire Rope and Components
Pipe
Hangers
Threaded
Rod
Strut
Transverse Cable Bracing for Trapeze
Supported Pipe or Conduit Systems
∙∙ Attaches sway brace to hanger rod.
∙∙ To be used with 7 x 19 strand core
pre-stretched galvanized aircraft cable.
∙∙ Size range: 1∕8", 3∕16" and ¼" cable.
Fits 3∕8" through ¾" hanger rod bolt.
Stock: Electro-Galvanized (EG) finish.
TOLCO 991-
TOLCO 991-
TOLCO 991-
TOLCO 991-
TOLCO 991-
Cable/Rod
Size
Std Pkg
1/8 x 3/8-PGL . . . . . . .
1/8 x 1/2-PGL . . . . . . .
3/16 x 1/2-PGL . . . . . .
3/16 x 5/8-PGL . . . . . .
1/4 x 3/4-PGL . . . . . . .
25
25
10
10
10
TOLCO 990-
TOLCO 990-
TOLCO 990-
TOLCO 990-
Wire Rope
Seismic Bracing Systems
Dia.
1/8
3/16
1/4
Philadelphia, PA
610-647-8070
Construction
7x7
7 x 19
7 x 19
Washington D.C.
877-419-2755
Tools
1/4 x 3/4-PGL . . . . . . 10
1/8 x 3/8-PGL . . . . . . 25
3/16 x 1/2-PGL . . . . . 10
3/16 x 5/8-PGL . . . . . 10
∙∙ Secure channel to hanger rod for vertical
seismic bracing.
∙∙ Stock: Electro-Galvanized (EG) steel.
∙∙ Special Order: HDG finish or Stainless Steel,
call for availability.
Part No
12DWIRH/7 x 7
8DWIRH/7 x 19
25DWIRH/7 x 19
Cable/Rod
Size
Std Pkg
Rod Stiffener - Fig 98
Galvanized Wire Rope
Part No
Abrasives
Part No
OnSite
Supply
∙∙ Attaches sway brace to structure or hanger.
∙∙ To be used with 7 x 19 strand core prestretched galvanized aircraft cable.
∙∙ Size range: 1∕8", 3∕16" and ¼" cable. ¼"
thru 1" hanger rod or fastener.
∙∙ Mounts to any surface angle.
∙∙ Stock: Electro-Galvanized (EG) finish.
Part No
TOLCO98-EG
Boston , MA
800-645-6155
Safety
Cable Sway Brace Attachment - Fig 990
Std Pkg
. . . . . . . . . . . . . . . . . . . 100
Hartford, CT
800-969-0285
229
Rentals
Fast Attach — Cable Sway Brace Attachment
Fig 991
Fasteners
vibration isolation products - VMC
“E-Z” Cut Pads
Anchors
Strut
Choose
the number of
segments required
and tailor-make for
the most effective shape
for the equipment base.
Extra segments can be used
for increased loading.
Maxi-Flex Pad’s
sectional construction
allows easy separation of
segments with a utility knife
or shears, and should be
used in full segments.
Threaded
Rod
Recommended Load Ratings
per 2” x 2” segment
Color Code
Blue
Black (std)
Red
Green
•
Pipe
Hangers
•
•
Stocked in Black
Typical Applications
Load Rating
120 lbs
180 lbs
240 lbs
360 lbs
HVAC Equipment -
Compressors - Chillers
Standard sheet size - 18” x 18”
x 3/4” thick
Easily cut to fit required loading
Molded in colored oil-resistant
neoprene for easy identification
Motor Generators Diesel Generator Sets
Presses Lathes - Pumps - Shears
Steam Generators Transformers - Textile Machines
Type 4
Series “RSH”
Spring Flex Hanger
Noise and Vibration
Isolator
•
•
•
•
Isolator for both vibration and
noise for suspended piping
and equipment
Color coded spring and
neoprene element
Load range 21 lbs to 5,000 lbs
Up to 5” of static deflection
Tools
Type 8
Series “SH”, “SHSC”
Spring Flex Hangers
Type 23
Series “RH”, “RHD”
Neoprene Hangers
Vibration Isolator
Noise Isolator
•
•
Abrasives
•
•
•
Isolator for suspended piping and
equipment
Color coded spring
Load range 21 lbs to 5,000 lbs
Up to 5” of static deflection
Spring Mounts
OnSite
Supply
AWMR
•
•
Colored neoprene element
identifying capacity
Load range 35 lbs to 4,000 lbs
.25” to .50” deflection
Series “AWMR” Restrained Spring-Flex Mountings
The design incorporates a rugged welded steel housing with vertical and horizontal
limit stops able to withstand a minumum of 1.0g accelerated force in all directions.
Loads to 10,000 pounds and static deflections to 2”. They are particularly recommended for equipment with differing installed and operating loads such as cooling
towers and chillers or equipment subjected to severe wind loads.
Series “ASCM” Restrained Spring-Flex Mountings
Safety
Designed for seismic and restrained applications, these mountings when properly
installed and adjusted will restrain mechanical equipment during a seismic event. For
equipment that requires restrained isolators due to change in load, the ASCM incorporates a vertical limit stop to reduce motion.
ASCM
Rentals
230
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SteelSheet Metal Waterproof
Cast-In-PlaceFirestopLink Seals
Pipe Sleeves are used in ALL TYPES of Concrete Construction
Threaded
Rod
Straight Sleeves, Solid & Split Sleeves (with or without Nail Tabs),
Q-Deck Sleeves
Strut
Anchors
NEFCO Provides Custom Fabrication
for the Following Types of Sleeves:
Fasteners
SLEEVES
Pipe
Hangers
Materials: Schedule 40 Steel Pipe, Sheet Metal
Waterproof Sleeves
Tools
Materials: Schedule 40 Steel Pipe and Steel Plate
Ordering:
Abrasives
• Specify nominal pipe size "A", Dimension "B"
and overall length
Cast-In-Place Firestop Sleeves
Applications:
Link Seals
Materials: Seals - EDPM or Silicone; Hardware - Plated Steel,
304 or 316 Stainless Steel
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
231
Rentals
Safety
OnSite
Supply
• 2", 3", 4", and 6" trade size plastic or metallic pipes
• Insulated metallic pipes
• Cable bundles
• Concrete ranging in depth from 2-1/2" to 8"
• Concrete greater than 8" using available extension tubes
• Concrete over steel deck using available Deck Adapter Kit
Fasteners
Wire hanging systems
Anchors
High Speed Hanger Solutions for HVAC, Mechanical, Lighting, and other Electrical Services
Strut
HID Lighting
Spiral Duct
Rectangular Duct
Threaded
Rod
Pipe
Hangers
Primary support and safety line
Single Point: Gripple at top
Cradle & Corner Saddles
Cable Basket
Tools
Abrasives
Double Point: Cradle
Conduit Racks
Two Gripple Assemblies
& Strut Support
Air Handling Units
OnSite
Supply
GRIPPLE
Call for
Hanger Kits
and Accessory
Ordering
Safety
Caddy Speed
Link
See page 235
Rentals
232
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
GRIPPLE provides nearly unlimited overhead hanging solutions, designed to save both time and money.
Call us or visit www.gripple.com for a complete listing of GRIPPLE Solutions
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
233
Fasteners
Rentals
Safety
OnSite
Supply
Abrasives
Tools
GRIPPLE Trapeze Fitting for Strut
Pipe
Hangers
Threaded
Rod
Strut
Anchors
gripple® hanging systems
Fasteners
RIZE KWIC-LOC Hanging Systems
Kwic-Locs
Anchors
The RIZE KWIC-LOC cable lock can be used as a fast and reliable way to
suspend fluorescent lighting, HID's, sound systems, cable trays, and fan units.
Cable locks are to be used on static load applications only.
Features:
• Zinc Housing: One-piece, die-cast, zinc alloy combines major anti-corrosion
properties with strength.
Strut
• Locking Wedges: An oil impregnated sintered steel locking wedge is seated
in each of two channels. Both wedges incorporate a release pin for easy
adjustment. Each wedge makes contact with the cable using serrated teeth.
These teeth press onto the cable and spread the load across the length of
the wedge, maximizing grip strength.
• Stainless Steel Springs: Assures the initial engagement of the locking
wedge to the wire rope.
Threaded
Rod
KL-200 Kwic-Loc
The largest of the Kwic-Loc Seeries with the highest safe work load limit; perfect for hanging sound
systems and heavy cable tray.
KL-150 Kwic-Loc
Significantly smaller in size and with a lower safe work load limit than the KL-200, the KL-150 may
be used to hang heavy cable baskets and HID lights.
Pipe
Hangers
KL-100 Kwic-Loc
Works on most lighting applications. It can be used to hang fluorescent lights, speakers, busbar
and cable tray to name a few.
KL-50 Kwic-Loc
A solution for lightweight hanging applications. Signs, lighting and gallery displays are the perfect
applications for this size cable lock.
Cut-Away View of Kwic-Loc
Tools
Kwic-Loc Range and Selection Guide
Abrasives
Kwic-Loc Size
Typical Applications
Wire Rope Diameter
Safe Working Load
5:1 Safety Factor
Safe Working Load
4:1 Safety Factor
Sound Systems,
Heavy Cable Tray
1/8"
25-250 lbs.
25-312 lbs.
KL-200
3/16"
50-640 lbs.
50-800 lbs.
KL-150
OnSite
Supply
KL-100
KL-50
Safety
Rentals
234
Heavy Cable Basket
HID Lights
Fluorescent Lights,
Speakers, Busbar,
Cable Tray
Signs, Lighting, Gallery
Displays
4 mm
25-180 kg.
25-227 kg.
3/32"
25-150 lbs.
25-187 lbs.
1/8"
25-225 lbs.
25-281 lbs.
2.5 mm
12-100 kg.
12-125 kg.
3.0 mm
12-120 kg.
12-150 kg.
1/16"
0-75 lbs.
0-93 lbs.
3/32"
25-150 lbs.
25-187 lbs.
2.0 mm
12-55 kg.
12-68 kg.
2.5 mm
12-100 kg.
12-125 kg.
1/32"
0-14 lbs.
0-18 lbs.
3/64"
0-46 lbs.
0-57 lbs.
1.2 mm
0-21 kg.
0-26 kg.
KL-100SK161
Starter Kit - (1) 500' roll 1/16" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
KL-100SK332
Starter Kit - (1) 500' roll 3/32" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
CADDY® SPEED LINK LD
Universal Support System
Features
Threaded
Rod
Strut
• Ideal in lighting, ductwork, and other installation projects
• Cost-effective alternative to hack chain,
threaded rod, and associated hardware
• Safe working load of 20kg (44 lb)
• Meets the fire rating requirements for DIN
4102-2 for 30 minutes at 30 percent of
rated load
• 5:1 safety factor
• Sleek low-profile locking device reduces
visual impact
• Adjustable after installation
• Available in stainless steel for applications
where a higher level of corrosion resistance
is required
• Works with a variety of CADDY Fasteners
CADDY® SPEED LINK LD
Wire rope diameter: 1.5mm (0.059 inch)
Safe working load: 20kg (44 lb)
Wire Length
6.6 ft long
16.4 ft long
32.8 ft long
6.6 ft long
16.4 ft long
32.8 ft long
Material
Galvanized steel
Galvanized steel
Galvanized steel
Stainless steel
Stainless steel
Stainless steel
Pkg Qty.
20
20
20
2
2
2
Pipe
Hangers
Part No.
SLD15L2
SLD15L5
SLD15L10
SLD15L2S
SLD15L5S
SLD15L10S
Fasteners
caddy® speed link
CADDY® Toggles
Abrasives
Pkg Qty.
20/bag; 5
20/bag; 5
20/bag; 5
20/bag; 5
20/bag; 5
bags/box
bags/box
bags/box
bags/box
bags/box
Description
SLADCP
Air Duct Corner Protector
SLADS
Air Duct Support Attachment
100
SLWPT
Wire Insulation Protection Tube
25M
SL1214
Cable Clip 12-14 mm
100
SL1518
Cable Clip 15-18 mm
100
SLLC250
Lighting Clip, 6 mm
200
SLEBM6
Eye Bolt M6; 30 mm long
100
SLEBWS
Eye Bolt for Wood, H6; 60 mm long
100
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Pkg Qty
Boston , MA
800-645-6155
10
SLADS
SLLC250
SLADCP
SLWPT
SL1518, SL1214
Hartford, CT
800-969-0285
SLWC
Safety
Part No.
OnSite
Supply
CADDY® Speed Link Tools & Accessories
SLEBWS
235
Rentals
Wire Length
20 in. leg length
32 in. leg length
6.6 ft. long
16.4 ft. long
32.8 ft. long
Part No.
SLD15Y500
SLD15Y800
SLD15L2T
SLD15L5T
SLD15L10T
Tools
A new universal toggle and Y-toggle for CADDY SPEED LINK LD makes overhead lighting and overhead decking installation even easier. For overhead decking applications, a universal toggle/wire
rope assembly is now available in 2m (6.6 ft), 5m (16.4 ft), and 10m (32.8 ft) lengths. the part is
identical to standard CADDY SPEED LINK LD, except the hook is replaced with a toggle. An optional
Y-toggle easily hangs lights. It consists of a 500mm (20 in.) or 800mm (31 in.) length of wire repo
with a toggle on each end. The center of the wire rope is looped and crimped.
Fasteners
rooftop supports
Anchors
Your Complete
Source for Rooftop
Supports
DB10
Strut
DB20
DBP
DB30
DB_DS Series
DBM
Threaded
Rod
Base Only
Base w/ 14 ga. Galvanized
Channel - 1" H
(2) Base Supports
Pipe
Hangers
w/ 12 ga.
Galvanized Channel - 1-5/8" H
Riser Channels - 1-5/8" x
1-5/8" x 12 ga.
Fittings & Hardware -
Electroplated Steel
Tools
Dura-Blok channel support is
designed as an economical support
for piping systems, cable tray, HVAC
equipment and many other applications. The Dura-Blok™ is UV resistant
and is suitable for any type of roofing
material or other flat surfaces. Material effectively accepts screw fasteners
for securing accessories.
Dura-Blok™ DB-Series channel support is designed for superior support
of piping systems, cable tray, HVAC
equipment, walkway systems and
many other applications. The DuraBlok™ is UV resistant and suitable
for installation on any type of roofing
material or other flat surfaces.
Specifications:
Ultimate Load Capacity - 1,000 lbs.
Dimensions - 23" to 53" H x 25-5/8" to
55-5/8" W x 20.2" L
Specifications:
Dimensions - 4" H x 6" W x 4.8" or
9.6" L (base length)
Material - 100% recycled rubber, UV
resistant
Ultimate Load Capacity - 500 lbs.
(uniform load)
Please call for specific item information.
Dimensions - 5" H x 6" W
™
Abrasives
Part
No.
Length
Load
Cap.
DB5
DB10
DB20
DB30
DB40
DB48
4.8"
9.6"
20.2"
30.8"
41.4"
52"
500 lbs.
500 lbs.
1000 lbs.
1500 lbs.
2000 lbs.
2500 lbs.
DB10 Series
DBE Series
OnSite
Supply
2-Bases w/ 12 ga.
Galvanized Channel - 1-5/8" H
Base w/ 12 ga. Galvanized
Channel - 2-7/16" H
Specifications:
Specifications:
Dimensions - 5-5/8" H x 6" W
Ultimate Load Capacity - 1000 lbs.
(uniform load)
Dimensions - 6-7/16" H x 6" W
Part
No.
Safety
10-28
DB
DB10-36
DB10-42
DB10-50
DB10-60
Rentals
236
Bridge
Length
Ind. Base
Length
28"
36"
42"
50"
60"
9.6"
9.6"
9.6"
9.6"
9.6"
Part
No.
Length
Load
Cap.
DB610
DB620
DB630
DB640
DB648
4.8"
9.6"
20.2"
30.8"
41.4"
500 lbs.
1000 lbs.
1500 lbs.
2000 lbs.
2500 lbs.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Base w/ (2)
1/2" Electro
Zinc AllThreaded
Rod Risers
and 14 ga.
Galvanized
Slotted
Channel
Dimensions - Base; 4" H x 6" W x 9.6" L
Ultimate Load Capacity - 200 lbs. (To
increase load capacity use CLDP10
load distribution plate.)
Dura-Blok™ DBE-Series channel support is designed as a support
of piping systems, cable tray, HVAC
equipment and many other
applications where elevation adjustment is critical.
Part
No.
Adjustable
Height
Load
Cap.
DBE10-8
5-1/2 to 8" 200 lbs.
DBE10-12 5-1/2 to 12" 200 lbs.
DBE10-16 5-1/2 to 16" 200 lbs.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
9.86"-11.36"
10.06"-11.56"
10.14"-11.64"
10.25"-11.75"
10.42"-11.92"
10.66"-12.16"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
Dura-Copper® Pipe Clamp
Part
Height
Pipe
No.
Min-Max
Size
DB
M-1/2CT 9.69"-11.19"
DBM-3/4CT 9.84"-11.34"
DBM-1CT
9.95"-11.45"
DBM-1-1/4CT 10.13"-11.63"
DBM-1-1/2CT 10.28"-11.78"
DBM-2CT
10.53"-12.03"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
Adjustable Height
Base - 4" H x 6" W x 9.6" L (base length)
Pipe Roll & Sockets - For up to 3½"
pipe sizes.
Ultimate Load Capacity - 200 lbs. (To
increase load capacity use CLDP10
load distribution plate.)
Dura-Blok™ DBR-Series support is
designed to support pipe up to
3½"" nominal size where difference in
elevation is required and longitudinal
movement is expected. The DuraBlok™ is UV resistant and approved
for installation on any type of roofing
material or other flat surfaces.
Pipe
Size
DBR10-12 Up to 3½"
Threaded
Rod
Fixed Height
Pipe Roller Material - Electro Plated
Cast Iron; Brackets, Axle, & Hardware
- Electro Plated Steel
Dimensions - Adjustable up to 12"
from bottom of base to pipe contact
point on roller.
Part
No.
Base with 14 ga. Galvanized
Channel - 1" High & Pipe
Roller Assembly
Dura-Blok™ DBR-Series support is
designed to support pipe where longitudinal movement is expected. The
Dura-Blok™ is UV resistant and approved for installation on any type of
roofing material or other flat surfaces.
Part
No.
DBR2-3½
DBR4-6
DBR
8-10
DBR
12-14
DBR
16-20
Pipe
Size
Load
Cap.
2"-3½"
4"-6"
8"-10"
12"-14"
16"-20"
500 lbs.
500 lbs.
1000 lbs.
1000 lbs.
1000 lbs.
Pipe
Hangers
Base with (2) 1/2" Electro Zinc
All-Threaded Rod Risers and
Pipe Roll with Sockets
Tools
Malleable Iron Pipe Clamp
Part
Height
Pipe
No.
Min-Max
Size
DBR10-12
Abrasives
Dura-Blok™ DBM-Series pipe/tubing
support is designed for support of
single piping systems where elevation
adjustment is needed. The Dura-Blok™
is UV resistant and suitable for installation on any type of roofing material
or other flat surfaces.
DBR Series
Load
Cap.
200 lbs.
OnSite
Supply
Base Dim: 6" W x 4.8" L
Pipe Clamp Material:
Malleable Iron or
Dura Copper®
Threaded Rod/
Hardware - Electro
Plated Steel
Ultimate Load Capacity - 50 lbs.
Strut
Base with (1)
3/8” Electro
Zinc AllThreaded Rod
and Hinged
Pipe Clamp
DBM Series
DB
M-1/2
DB
M-3/4
DBM-1
DBM-1-1/4
DBM-1-1/2
DB
M-2CT
Anchors
Your Complete
Source for Rooftop
Supports
Fasteners
rooftop supports
Load Distribution Plate
Pipe Roll & Sockets - For up to 3½"
pipe sizes.
CLDP10 LOAD DISTRIBUTION PLATE
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Ultimate Load Capacity - Increases
load capacities for DBE and DBR Series supports.
Hartford, CT
800-969-0285
237
Rentals
Dimensions - 15/8" W x 61/2" L
Material - 11 gauge steel
Safety
Increases ultimate uniform load
capacity on DBE & DBR Series
Fasteners
rooftop supports
Caddy Pyramid ST Series
Strut-Based Thermoplastic Supports
Anchors
Fixed Strut Supports
• Provide fixed-height mounting platform 4" or 6" off the roof surface and 10" to 16" of
usable strut length.
• Maximum recommended load is up to 1,500 lbs.
• Hot-dipped galvanized finish provides superior corrosion protection.
Strut
Part No.
Height
L1
L2
Width
Wt.
Max Rec.
Load*
RPS360400
4"
10"
12.5"
8"
2.95 lbs.
1,000 lbs
RPS360401
6"
10"
12.5"
8"
4.65 lbs.
1,000 lbs
RPS360403
4"
16"
18.5"
8"
4.40 lbs.
1,500 lbs
RPS360404
6"
16"
18.5"
8"
7.05 lbs.
1,000 lbs
Threaded
Rod
* Max. Recommended Load at 10.6 psi roof loading. Contact your project or roofing engineer for maximum allowable
load on individual project roof system
Pipe
Hangers
Tools
Adjustable Height Strut Supports
• Allow elevation change up to 16" off roof surf, with up to 10" or 16" of usable strut length.
• Maximum recommended load is up to 1,500 lbs.
• Hot-dipped galvanized finish provides superior corrosion protection.
H1
H2
L1
L2
Width
Weight
Max Rec.
Load*
RPS360402
4.6"
12"
10"
12.5"
8"
4.30 lbs.
1,000 lbs
RPS360405
5.15"
17"
16"
18.5"
8"
6.00 lbs
1,500 lbs
Abrasives
Part No.
* Max. Recommended Load at 10.6 psi roof loading. Contact your project or roofing engineer for maximum allowable
load on individual project roof system
OnSite
Supply
Safety
Rentals
238
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Caddy Pyramid RL Series
Strut-Based Thermoplastic Supports
Fixed Roller Supports
• Provide roller capability for up to 6" nominal pipe with 5.5" fixed height.
• Polymeric rollers will not rust, helping to ensure long-lasting performance and smooth
roller action.
Fasteners
Anchors
rooftop supports
• Supports up to 6" diameter (Nom.) Schedule 40 water-filled steel pipe at maximum spacing
of 10'.
Part No.
Nominal
Pipe Dia.
H
L
W
Wt.
Max Nom. Pipe
Size* ø
RPS360406
3/4" - 3"
5.5"
12.5"
8"
3.85 lbs.
3"
RPS360401
2" - 6"
5.5"
18.5"
8"
5.20 lbs.
6"
Strut
• Hit-dipped galvanized finish on steel roller axle, fittings and other hardware provides
superior corrosion protection.
Pipe
Hangers
Threaded
Rod
Maximum diameter of Sch. 40 water-filled steel pipe at maximum 10' support spacing
Adjustable-Height Roller Supports
• Polymeric rollers will not rust, helping to ensure long-lasting performance and smooth
roller action.
• Hit-dipped galvanized finish on steel roller axle, fittings and other hardware provides
superior corrosion protection.
Tools
• Can accommodate elevation changes of up to 16" off the roof with up to 6" diameter
(Nom.) pipe.
Part No.
Nominal
Pipe Dia.
H1
H2
L
Width
Wt.
Max Nom. Pipe
Size* ø
RPS360406
3/4" - 3"
5.5"
12"
12.5"
8"
4.20 lbs.
3"
RPS360401
2" - 6"
5.5"
16"
12.5"
8"
5.95 lbs.
6"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
239
Rentals
Safety
OnSite
Supply
Maximum diameter of Sch. 40 water-filled steel pipe at maximum 10' support spacing
Abrasives
• Supports up to 6" diameter (Nom.) Schedule 40 water-filled steel pipe at maximum spacing
of 10'.
Fasteners
rooftop supports
Caddy Pyramid EZ Series
Adjustable Height Tool-Free Rooftop Pipe Supports
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Part No.
Max. Nom. Pipe or
Conduit Size*
Max Pipe or
Conduit OD
H
L
W
RPSE1H24
1"
1.315"
1-3/4" - 4"
4"
RPSE1H57
1"
1.315"
5" - 7"
4"
RPSE2H46
1"
2.37"
4" - 6"
4"
Wt.
Ultimate Load**
6"
2 lbs.
170 lbs.
6"
3.04 lbs.
170 lbs.
6"
3.3 lbs
250 lbs.
* Maximum Diameter of Sch. 40 water filled steel pipe at maximum 10' support spacing.
** Ultimate load at 1/4" deflection. Contact project or roofing engineer for maximum allowable load on individual project roof system
Tools
Abrasives
OnSite
Supply
Safety
Rentals
240
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• Supports up to 50 lb loads
• Polyethylene closed-cell foam and
16 gauge steel construction
• The 4” high model has a 10-3/8” x 4”
footprint
• The 6” high model has a 10-3/8” x
4-3/4” footprint
• Electro-galvanized (EG) finish on the
rooftop version and CADDY® COAT
Silver (SV) on the plenum version provide superior corrosion protection
• Metal top designed to shed water
and minimize water collection on
foam base
Features
• Dramatically reduces installation time by replacing labor-intensive methods for supporting pipes,
conduits and equipment
• Supports multiple runs of pipe and conduit on roofs
and below raised floors
• Supports concentrated loads up to 600 lbs
• Absorbs shock and vibration
• Protects roof membrane
• Metal cover protects from weather and other environmental conditions
• Features an electro-galvanized finish for corrosion
protection
CADDY® PYRAMID 300
• Supports up to 300 lb loads
• Crosslink polyethylene closedcell foam supports the additional
weight; 14 gauge steel top plate
CADDY® PYRAMID 25
• Supports up to 25 lb loads
• Lightweight, all-plastic construction
weighs less than 1/3 lb
• Has a small 4” x 5” footprint
• UV-Rated
• Handles up to three 1/2” or two
3/4” or 1” pipes/conduit
• No tools or fasteners needed for
installation
CADDY® PYRAMID 600
The simple solution for rooftop support.
Advance Support
Products
Duct & Cable Tray
Supports
Safety
Low Profile Supports /
Multilevel Pipe Supports
Conduit & Condensate Supports
SS-1000-R
Water & Steam
Supports
Gas & Mechanical
Supports
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Mechanical Equipment
Supports
Boston , MA
800-645-6155
Threaded
Rod
OnSite
Supply
• Consists of two CADDY PYRAMID
300 bases tied together with a
length of strut
• Footprint is 32” x 12” (24” x 16”
optional with cutting of strut) for
more even load distribution
• Supports up to 600 lb loads
Pipe
Hangers
Strut
Threads Finish Included?
–
–
–
–
–
–
–
EG
–
EG
–
–
–
SV
–
3/8”-16 EG
NO
3/8”-16 EG
YES
3/8”-16 EG
NO
3/8”-16 EG
YES
3/8”-16 EG
YES
Tools
• Supports up to 150 lb loads
• Has six 3/8”-16 threaded inserts
with captivenuts that allows the
product to be used with standard
pipe clamps and accessories
• Large 16” x 12” footprint distributes load more evenly than alternative methods
• Polyethylene closed-cell foam and
• 14 gauge steel construction
• Electro-galvanized (EG) finish on top
plate for added corrosion protection
Abrasives
Max.
Working
Load (lbs) Height
25
3-5/8”
25
5-5/8”
50
4”
50
6”
50
2-1/4”
150
3-3/16”
150
4”
300
3-3/16”
300
4”
600
4”
CADDY® PYRAMID 150
Material: Composite base/galvanized
steel/rubber roller
Dimensions: 18” by 12” high
Hartford, CT
800-969-0285
241
Rentals
Part
Fig.
Number No.
PPRPS25H4 1
PPRPS25H6 1
RPS50H4EG 2
RPS50H6EG 2
RPS50AHSV*2
RPS150T1 3
RPS150T2 3
RPS300T1 4
RPS300T2 4
RPS600T2 5
Fasteners
Pipe & Equipment Supports
Anchors
CADDY® PYRAMID 50
CADDY® PYRAMID
Strut
rooftop supports
Fasteners
rooftop supports
Anchors
PIPE PIER® support solution for roof and raised floor applications. Engineered to securely hold pipe,
conduit, cable, and HVAC equipment. PIPE PIER® supports are made of a tough, flexible, roof-friendly
closed-cell polyethylene foam that is UV resistant and practically weatherproof. Its firmness, with a
gentle touch, protects expensive roof membranes even when there is no protective gravel or rock.
Builders, contractors and engineers agree that PIPE PIER® is well constructed, durable, quick and easy
to install, versatile, and cost effective.
Advantages of PIPE PIER®
• Quick and Easy Installation
Only the simplest tools are required for installation; even
long runs or multiple pieces install quickly and precisely.
Strut
• PIPE PIER® Ten-Packs are Safer
A lightweight ten-pack weighs only ten pounds and is easily
transported to the roof.
Threaded
Rod
• Versatile
PIPE PIER® support systems can be used in hundreds of
combinations to solve nearly every pipe support need and
allow you to mount breaker and junction boxes safely off
the roof level.
• Cost Effective and Labor Saving
Reductions in maintenance, capital cost, and labor.
Pipe
Hangers
PP50H6
PP50H4
• Strut Channel
The galvanized, stainless steel, or High Density Polyethylene (HDPE) channel accepts readily available strut clamps
and accessories.
• Mechanical Testing
PIPE PIER® meets standards of the American Society for
Testing and Materials (ASTM) to ensure the strength of
each PIPE PIER® component. A sample of each shipment is
independently tested to meet PIPE PIER® specifications.
• Environmental Testing
Atlas Weathering Services Group, in Arizona, has tested
the product for UV resistance, foam degradation, loading
abilities, and horizontal movement.
PIPE PIER®
300
PP50ELH4
Tools
PIPE PIER®
150
PIPE PIER® Classic
• Closed-cell, medium density, black
Polyethylene Foam Ethafoam HS 45
• 14 Gauge Galvanized Strut Channel
Abrasives
• Hot melt adhesive-bonding sheet
metal to foam block
PP30ELH4
The PIPE PIER® 150 and
PIPE PIER® 300
OnSite
Supply
PIPE PIER® support blocks have been
designed and engineered specifically for
rooftop and raised floor applications.
The maximum center loads for the PIPE
PIER® 150 and PIPE PIER® 300 are 150
lbs. and 300 lbs. per support block (respectively). Piping should be attached
using standard strut clamps, rollers, or
other approved accessories. Recommended maximum spacing between
support blocks is 10 feet.
PP50H2AH
Plenum Pier®
Safety
Stands at a height of 2” and is designed to support pipe, conduit, and
cabling under raised floors with a
maximum 50 pound capacity.
Part
No.
PP50H4
PP50H6
PP150H4
PP300H4
PP50H2AH
PP30ELH4
PP50ELH4
PP50ELH6
The PIPE PIER® Elite
• 100% recyclable
• Lightweight — saving time and
energy
• Protects — absorbs shock, dampens vibration and provides superior
stability — keeping pipe, conduit
and equipment secure and roof
structures free of damage
• Durable — offers superior temperature resistance and UV protection,
ensuring long-lasting performance
under the harshest conditions.
Dimensions
(strut finish)
10-1/2" L x 4" W x 4" H (PG)
10-1/2" L x 4" W x 6" H (PG)
12" L x 12" W x 4" H (PG)
21-1/2" L x 12" W x 4" H (PG)
10-1/2" L x 4” W x 2” H (CG)
5" L x 4" W x 4" H (HDPE)
10-1/2" L x 4” W x 4” H (HDPE)
10-1/2"" L x 4" W x 6" H (HDPE)
Load
Capacity
per Block
50 lbs.
50 lbs.
150 lbs.
300 lbs.
50 lbs.
30 lbs.
50 lbs.
50 lbs.
Rentals
PG = Pre-galvanized CG = Yellow Dichromate HDPE = High Density Polyethylene
242
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
“Underground” Socket
Clamp with Washer
Socket Washer
Note: Order Socket Washers Separately By Hole Size
Finishes Available • EG • HDG • SS
Part No.
Black
300DSOC
400DSOC
600DSOC
800DSOC
10ISOC
12ISOC
14ISOC
16ISOC
18ISOC
20ISOC
24ISOC
Part No. Black
3/4
1
1-1/4
1-3/8
1-1/2
4-12
14-24
14-24
14-24
14-24
70DSCW
100DSWD
125DSWD
137DSCW
150DSCW
Corporation/Offset
Eye Bolts (Pig Tail)
HS
Part No. Black
3/4 x 4
3/4 x 4 1/2
75C400TIB
75C450TIB
Threaded
Rod
HS
3/4
3/4
3/4
3/4
3/4
3/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
Pipe
Size
Duc Lug
Pipe
Hangers
Part No.
0UDUL/P
Tools
T-Head Bolts with Nuts
ASTM A-242
(Corten)
Also Available in
Anti-Rotation Style
Part No.
Bolt Size
Thread
L
Bolt
Length
D
TL
Bolt
Thread
Diameter Length
W
Head
Width
H
Head
Height
NT
F
Nut
Across
Thickness Flats
CQ
WT
Container Wt/C
Quantity Pcs.
62C250CTB
62C300CTB
62C350CTB
75C300CTB
75C350CTB
75C400CTB
75C450CTB
5/8
5/8
5/8
3/4
3/4
3/4
3/4
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
2.5
3.0
3.5
3.0
3.5
4.0
4.5
.625
.625
.625
.750
.750
.750
.750
1.50
1.50
1.50
1.75
1.75
1.75
1.75
.625
.625
.625
.750
.750
.750
.750
625
.625
.625
.750
.750
.750
.750
400
375
375
250
225
200
175
1.25
1.25
1.25
1.75
1.75
1.75
1.75
1.062
1.062
1.062
1.250
1.250
1.250
1.250
45
49
53
79
84
89
94
OnSite
Supply
X 2 1/2
x 3
x 3 1/2
x 3
x 3 1/2
x 4
x 4 1/2
Abrasives
Pipe
Size
3
2
6
8
10
12
14
16
18
20
24
HS
Strut
Grinnell Model No. 600
Michigan Model No. 517
Anchors
Grinnell Model No. 594
Michigan Model No. 516
Fasteners
water works items / underground clamps / t-head bolts
NEFCO also stocks the following water works items:
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
243
Rentals
Philadelphia, PA
610-647-8070
Safety
• Gaskets • Anti-Rotational T-Head Bolts
• Ductile Iron Clevis Hangers • Threaded Rod
Fasteners
pipe flashings
Anchors
Universal Master Flash® and Retrofit Master Flash® (Dektite™) Pipe Flashings
Universal Master Flash® Flashing Guide
Strut
Threaded
Rod
Part
Number
Description
4001910
4003910
4004910
4009910
4035910
4011910
4016910
4036910
4018910
4020910
4025910
4038910
4028910
4039910
4000910
Mini
1
2
3
#3 Silicone
4
5
#5 Silicone
6
7
8
#8 Silicone
9
#9 Silicone
Diverter
Pipe O.D.
(Inches)
Base Dia.
(Inches)
Height
(Inches)
1/4 - 1-1/8
1/4 - 2
1-3/4 - 3-1/4
1/4 - 4
3-1/2
4-3/4
6-1/4
7-3/4
1-3/4
3
4
4
Universal Master Flash
3 - 6
4 -7
9-1/4
10-3/4
5
5
Part
Number
Size
Number
Pipe O.D.
(Inches)
Base Dia.
(Inches)
Height
(Inches)
5-9
6 - 11
7 - 13
12-1/2
14-1/2
16-1/2
6
6
6
4029910
4030910
4031910
801
802
803
3/4 - 2-3/4
2 - 7-1/4
3-1/4 - 10
6-3/10
10-3/4
14-1/2
3-1/2
5-3/5
5-4/5
10 - 18
25-3/8
8
16 - 24
39-1/2 x 35 9
Retrofit Master Flash
Diverter
Retrofit Masterflash® Selector Guide
Note: When used on roofs where pitch is steeper than 20 degrees,
or when used on deep ribbed profile roof panel (1-1/2” deep
corrugation or more), consider using next larger size Dektite
that will accommodate the same pipe diameter. Recommended
Sealant: Chemseco Sikaflex® sealant, Part No. 4040910.
Pipe
Hangers
2" Water Stop
INFINITY® Wall Sleeves
For Best Results —
Tools
Use with Innerlynx® Mechanical
Seals. See pages 210 - 211
INFINITY®
Wall Sleeve
Wall / Floor / Ceiling
Abrasives
Carrier Pipe
OnSite
Supply
Innerlynx®
INFINITY® Locator Caps
come with each sleeve and
attach to the form(s)
Call for Technical
Information and
Ordering Specifics
Features and Benefits
Safety
Rentals
244
16 Sizes
(2" - 25" in diameter
Each sleeve comes in lengths of 16" from the factory but
can be cut to the desired length in accordance with the
thickness of the concrete.
Made of HDPE
High density polyethylene provides excellent resistance to
acids, alkalies and other organic solvents. Ideal for cathode
protection systems, these non-conductive sleeves will never
rust or corrode. INFINITY® Wall Sleeves can withstand
temperatures up to 150°
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Power Tools - Cordless . . .
246 - 289, 395 - 399, 439
Milwaukee . . . . . . . . . 249 - 274
LITHIUM ION - M12 (12 Volt),
M18 (18 Volt), M28 (28 Volt)
DeWalt . . . . . . . . . . . . 246 - 289
DeWalt . . . . . . . . . . . . . 450
LITHIUM ION - 36V NANO,
28V NANO, 18V NANO,
12V MAX
Brand Name Tools &
Accessories
Nicd-XRP - 18V, 14.4V, 12V,
9.6V, 7.2V
Greenlee . . . . . . . . . . 395 - 399
Ridgid . . . . . . . . . . . . . . . . . 439
Hand Tools / Accessories
Diamond Products 331, 335, 338
Lenox .301, 303 - 304, 307 - 309,
312, 345, 347, 350 - 351, 353
Philadelphia, PA
610-647-8070
Generators / Compressors
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Milwaukee
Lenox
DeWalt
Stanley
Bosch
Sumner
Greenlee
Hougen
RIDGID
Klein
Reed
Channel Lock
Kollmann
Rothenberger.
Seekonk
PLS
Vise-Grip
Current Tool
Diamond Products
Hartford, CT
800-969-0285
245
Fasteners
Pipe
Hangers
Tools
Abrasives
Hougen . . . . . . . . . . 332 - 333
Ridgid . . . . 358, 408-411, 418
Milwaukee Test & Measurement
. . . . . . . . . . . . . . 401 - 403
Morse . . . . . . . . . . . . . . 356
PLS . . . . . . . . . . . 447 - 449
Reed . . . . . . . 417, 422, 424
RIDGID . . . . . . . . 414 - 416,
. . . . . . . . . 419 - 425, 442
Rothenberger . . . . . . . . 392
Stanley 441 - 449, 444 - 454
Sumner . . . . . . . . 386 - 388
Klein
389 -392, 457
Channel Lock . . . . . . . . . 457
Kollmann . . . . . . . . . . . . 441
Seekonk . . . . . . . . . . . . 442
Vise-Grip . . . . . . . . . . . . 456
OnSite
Supply
Current Tool . . . . . . 367 - 368
DeWalt . . . . . . . . . . 292 - 355
Milwaukee . . . . . . . . 292 - 366
Morse Metal Devil . . . . . . . 356
Bosch . . . 318, 320, 325, 328,
340, 342
Greenlee 362 - 366, 377 - 382
Hand Tools / Accessories
Safety
Power Tools - Corded . . . .
. . . . . . . . . . . . . 292 - 382
Rentals
Tools
Threaded
Rod
Strut
Anchors
Quick Reference
Fasteners
36V li-ion cordless
NANO™ Cordless Tool System
Anchors
Up to 2-3X the Runtime of 18V
Lightweight Design
• DeWalt's Heavy-Duty 36V NANO™ Phosphate Lithium Ion batteries delivers 2-3X
the runtime of comparable 18V NiCad
batteries.
• 2.4 lbs, the same weight as DeWalt 18V NiCad batteries
Strut
No Memory & Virtually
No Self-Discharge
• For maximum productivity and
less downtime.
Part No.
Threaded
Rod
DC9360
Description
36V NANO™ Replacement Battery
2,000 Recharges
DC300K
Li-ion
DC305K
DC900KL
36
36V Reciprocating Saw Kit
Abrasives
Specifications
OnSite
Supply
Volts:
36 V DC
Strokes per Minute: 0-3,000 SPM
Stroke Length:
1-1/8"
Electric Brake:
Yes
Weight:
8.4 lbs.
Part No.
DC305K
volt
36
36V 7¼" Circular Saw Kit
Li-ion
Tools
• 4-position keyless blade clamp allows
quick blade change, flush cutting, and
versatility.
• Anti-slip comfort grip for better control.
• 3-position adjustable shoe for adjusting
depth of cut and extends blade life.
• 36V high performance battery pack provides long run-time and battery life.
• DEWALT® built high power, and high efficiency motor with electric brake powers
through the toughest applications.
• KIT Includes (1) battery, 1 hour charger,
(1) reciprocating saw blade & impactresistant case.
volt
36V ½" Hammerdrill/
Drill/Driver Kit
• DEWALT® built high power, high efficiency
motor for superior performance in all
drilling and fastening applications.
• 36V high performance battery pack
provides long run-time and battery life.
• Patented 3-speed all-metal transmission
for optimal performance.
• Heavy-duty ½" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength.
• Anti-Slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & impact-resistant case.
Specifications
Description
36V Reciprocating Saw Kit
Li-ion
Pipe
Hangers
36
volt
Safety
Volts:
36 V DC
Max. Power:
750 UWO
# of Speed Settings: 3
Max RPM:
0-400/0-1,200/
0-1,600
Max BPM
0-6,800/0-20,400
0-27,200
Weight:
6.9 lbs.
Part No.
• All-metal keyless blade change system for
quick and easy blade changes.
• 0-50° bevel capacity with lever-action
detents at 22.5° and 45° allows for aggressive bevel cuts while allowing users to
locate common angles quickly.
• DEWALT® built, high power, high efficiency motor with electric brake is powerful
enough for the toughest applications.
• High-strength magnesium shoe and upper
guard provides increased durability for
long-term cut accuracy.
• 36V high performance battery pack provides long run-time & battery life.
• KIT Includes (1) battery, 1 hour charger,
(1) 7¼" carbide-tipped saw blade, rip
fence & impact-resistant case.
Specifications
Volts:
36 V DC
No Load Speed:
4,000 RPM
Bevel Capacity:
0-50 degrees
Arbor Size:
5/8"
Depth of Cut @ 45°: 1-5/8"
Depth of Cut @ 90°: 2-7/16"
Weight:
9.9 lbs.
Part No.
DC300K
Description
36V 7¼" Circular Saw Kit
Description
DC900KL 36V ½" Hammerdrill/Drill/
Driver Kit
Rentals
246
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
DC233KL
Anchors
DC308K
Fasteners
36V li-ion cordless
Volts:
36 V DC
Strokes per Minute: 0-2,700 SPM
Stroke Length:
1"
Electric Brake:
Yes
Weight:
8.4 lbs.
Part No.
Description
DC308K
36V Jig Saw Kit
Specifications
Volts:
No Load Speed:
Blows per Minute:
Weight:
Part No.
36 V DC
0-1,150 RPM
0-4,400 BPM
7.5 lbs.
Strut
36V ½" Torque Impact Wrench Kit
• DEWALT® built high power, high efficiency
motor with replaceable brushes delivers
maximum performance in all fastening
applications.
• 36V high performance battery pack
provides long run-time and battery life.
• Preferred rocker switch design for fast
and easy forward and reverse.
• Patented all-metal anvil provides durability
and prevents shearing.
• Anti-slip comfort grip provides increased
comfort and control.
• High speed all-metal transmission delivers
1,400 rpm for increased productivity.
• KIT Includes (2) batteries, 1 hour charger
& impact-resistant case.
Specifications
Volts:
36 V DC
No Load Speed:
1,400 RPM
Impacts per Minute: 2,500 BPM
Max Torque:
3,900 in.-lbs.
325 ft.-lbs.
Weight:
7.5 lbs.
Part No.
Description
Threaded
Rod
• SHOCKS™ Active Vibration Control significantly reduces vibration & increases user
comfort & productivity.
• Optimally balanced compact L-shape
design allows access in tight spaces.
• 2.0 ft-lbs impact energy provides corded
power without the cord.
• DEWALT® built high torque, high efficiency
motor delivers maximum performance in
all drilling applications.
• 36V high performance battery pack
provides long run-time & battery life.
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism
for fast penetration & low vibration.
• 360° side handle for better control &
ease of use in tight spaces.
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Pipe
Hangers
volt
Tools
Specifications
36
36V 1" SDS Rotary Hammer Kit
Description
DC800KL 36V ½" Impact Wrench Kit
DC233KL 36V 1" SDS Rotary Hammer Kit
Abrasives
• All-metal, lever-action keyless blade change
allows for quick & easy blade changes.
• All-metal keyless shoe bevel with detents
at 0°, 15°, 30° and 45° provides versatility
for easy bevel cutting.
• 4-position orbital action provides control
of aggressiveness of cut and speed.
• Adjustable dust blower keeps line of cut
clear of chips.
• 36V high performance battery pack provides long run-time & battery life.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (1) battery, 1 hour charger,
(1) jig saw blade & impact-resistant case.
volt
Li-ion
36V Jig Saw Kit
DC800KL
Li-ion
36
Li-ion
36
volt
Part No.
36 V DC
6,500 RPM
5/8"-11
Above 10,000 RPM
7.2 lbs.
Description
DC415KL 36V 4½"cut-Off Tool Kit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
36
volt
DC415KL
Hartford, CT
800-969-0285
Safety
Volts:
No Load Speed:
Spindle Thread:
Wheel Selection:
Weight:
247
Rentals
• Convenient trigger switch with spindle
lock-off button for easier gripping.
• 2 Position side handle offers greater
comfort and control.
• Quick-change wheel release provides
easier and quicker wheel removal without the need for a wrench.
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing access to tight spaces.
• KIT Includes (2) batteries, 1 hour charger,
(1) Type 27 Guard, (1) Type 1 Guard,
Wrench, Matched Flanges, Type 27 Grinding Wheel, Type 1 Cutting Wheel, side
handle & impact-resistant case.
Li-ion
Specifications
OnSite
Supply
36V 4½" Cut-Off Tool Kit
Fasteners
36V li-ion cordless
36
DCX6401
2 Tool Combo Kit DCX6200
Li-ion
Anchors
Combination Kits with NANO™ Technology
volt
Two or Four 36V Tools
in one convenient pack!
3 kits to choose from.
Strut
4 Tool Combo Kit DCX6401
DCX6200
Threaded
Rod
•
•
•
•
•
DC305 36V Reciprocating Saw
DC900 ½" HammerDrill/Drill/Driver
DC300 7¼" Circular Saw
DC509 36V Flexible Floodlight
Also Includes: (2) 36V Battery Packs,
360° Side Handle, #2 Phillips Bit,
7¼" Carbide-tipped Saw Blade,
rip fence, reciprocating saw blade,
1-Hour Charger & Kit Box.
Part No.
DCX6401 4 Tool Combo Kit
Li-ion
36
Description
DCX6210
volt
Description
DCX6200 2 Tool Combo Kit
2 Tool Combo Kit DCX6210
•
•
•
DC900 ½" HammerDrill/Drill/Driver
DC305 36V Reciprocating Saw
Also Includes: (2) 36V Battery Packs,
360° Side Handle, reciprocating sa
blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No.
Description
DCX6210 2 Tool Combo Kit
36
DC509
DC519
volt
Li-ion
Li-ion
28
volt
volt
volt
Li-ionLi-ion
Pipe
Hangers
36
DC900 ½" HammerDrill/Drill/Driver
DC300 7¼" Circular Saw
Also Includes: (2) 36V Battery Packs,
360° Side Handle, 7¼" Carbide-tipped
saw blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No.
Accessories
36
•
•
•
Tools
DC9000
DC9360
28V - 36V 1 Hour Charger
Abrasives
36V Li-Ion Battery Pack
with NANO™ Technology
OnSite
Supply
• Provides high power for corded performance.
• Delivers 2-3x more run-time vs. 18V
NiCad batteries.
• Offers long-life and durability - 2000
recharges
• Lightweight design - 2.4 lbs, the same as
DeWalt 18V Nicad battery
• Battery fuel gauge indicates how much
charge is left in battery.
• No memory and virtually no self-discharge.
Specifications
Safety
Voltage:
Compatible With:
Weight:
Part No.
DC9360
Rentals
248
• 1-Hr Charging for minimal downtime.
• 3-Stage charging system provides maximum run-time and extends overall life of
battery.
• Battery fuel gauge indicates how much
charge is left in battery.
• Cord wrap for improved cord storage.
Specifications
Voltage:
Bulb:
Compatible With:
Weight:
Part No.
DC9000
28 - 36 V DC
Xenon
28-36V DeWalt
Battery Packs
1.9 lbs.
Description
28V-36V Battery Charger
36 V DC
Entire line of DeWalt
36V Tools
2.4 lbs.
Hartford, CT
800-969-0285
• Flex neck design with lockable head clips
allow for hands free use and versatility
to stand or hang light.
• Wide angle beam of light provides more
light than a conventional flashlight.
• Xenon bulb provides extra bright beam
of light.
• 8 hours run-time on a single charge.
Specifications
Volts:
Bulb:
Run-Time:
Weight:
28V & 36 V DC
Xenon
8 hours
1.14 lbs.
Part No.
Description
DC509
DC519
36V Battery Pack w/NANO™
Technology
36V & 28V Floodlight
Boston , MA
800-645-6155
Description
36V Floodlight
28V Floodlight
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Up to 2X the Runtime of 18V
• Milwaukee's 28 volt, 3.0 Amp-Hr battery
has 2X the runtime of comparable 18V
2.8 Amp-Hr. NiCd packs.
Heavy-Duty Construction
Withstands Up To 10' Drop
Performance Optimizing
Circuit Maintains Cell Balance
and Prolongs Battery Life
Latches Quickly
and Easily Release
the Battery
Fasteners
Anchors
M28™ Li-Ion cordless
• Lighter weight than 18V NiCd & NiMH packs..
Part No.
Rubber Foot Provides
Impact Protection and
Prevents Sliding on
Slick Surfaces
Description
Threaded
Rod
Compact Li-Ion Power
Battery Fuel Gauge Shows
How Much Charge Is
Left - No More Guessing
Which Battery is Fully
Charged
48-11-2830 V28 Replacement Battery
Fade-Free Power
• The combination of Milwaukee's specialized high power LithiumIon battery cells and their performance optimizing circuit, provides up to 2½ times more lifetime work output when compared
today's 18V NiCd.
• Unlike NiCd batteries,M28 Li-Ion batteries maintain their power
level throughout their entire discharge cycle. The last cut (hole
drilled, etc.) feels as powerful as the first. This mean more productivity per battery.
0726-22
Tools
Longer Pack Life
Pipe
Hangers
• M28 batteries can be recharged at any
time without creating a memory effect, regardless of the pack's current charge level
Strut
No Memory Effect
0719-22
Lithium-Ion
Sawzall Reciprocating Saw
• KIT Includes (2) batteries, 1 hour charger, side handle, Phillips bit,
and case.
Specifications
Volts:
No Load RPM:
No Load BPM:
Torque:
Weight:
Part No.
28 Volts DC / 3.0 Amp-Hrs.
Low 0-600 / High 0-1800
Low 0-9,000 / High 0-27,000
750 in-lbs.
6.7 lbs. w/battery / 4.4 lbs w/o battery
Specifications
Volts:
Stroke Length:
Strokes Per Minute:
Length:
Weight:
Part No.
28 Volts DC / 3.0 Amp-Hrs.
1-1/8"
Low 0-2,000 / High 0-3,000
18 in.
9.1 lbs. w/battery / 6.8 lbs w/o battery
Description
0719-22 M28 Sawzall Reciprocating Saw Kit
0719-20 M28 Sawzall Reciprocating Saw Tool Only
Description
0726-24 M28 1/2" Hammer Driver/Drill Kit
0726-20 M28 1/2" Hammer Driver/Drill Tool Only
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
249
Rentals
• KIT Includes (2) batteries, 1 hour charger, (2) Sawzall® blades,
and impact-resistant case.
OnSite
Supply
• Heavy-duty 2-speed gear box.
• Metal Hammer Selector.
• ½" Metal Ratcheting Chuck with carbide jaws for superior gripping strength.
• Reversible Battery Pack allows users to change tool balance for
overhead work or to fit in tight places.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
• Feels and cuts like a corded saw.
• Exclusive Gear Protecting Clutch for long life.
• Rugged metal Quik-Lok® Blade Clamp and Adjustable Shoe for
fast, tool-free blade changes and adjustments.
• High/Low Speed Selector Switch with Lock.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
Safety
Lithium-Ion
1/2" Hammer Driver/Drill
Abrasives
®
Fasteners
M28™ li-ion cordless
Anchors
Lithium-Ion
1/2" Square Drive
Impact Wrench
0779-22
Strut
Threaded
Rod
• Flat Head Detent Pin for secure
socket .retention. (Also includes
round head pin).
• Magnesium Gearcase for added
durability and lighter weight.
• Reversible Battery Pack allows users
to change tool balance for overhead
work or to fit in tight places.
• Hanger Bracket with solid steel ring.
• Comfortable, Non-Slip Soft-Grip
reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
0721-22
Lithium-Ion ½" Right Angle Drill
• Head swivels 360° - Can be locked in any position.
• Heavy-duty gear box.
• Comfortable two-finger variable speed control with easy to
reach forward/reverse lever.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY (Incl. side handle & chuck key).
• KIT Includes (2) batteries, 1 hour charger and impact-resistant case.
• KIT Includes (1) battery, 1 hour charger, side handle, chuck key
and impact-resistant case.
Specifications
Pipe
Hangers
Volts:
Max. Torque:
No Load RPM:
Impacts perMinute:
Weight:
Specifications
28 V DC / 3.0 Amp-Hrs.
325 ft.-lbs. / 3900 in.-lbs.
0-1,450
0-2,450
8.9 lbs. w/battery / 6.6 lbs w/o battery
Part No.
Description
0779-22
0779-20
M28 1/2" Impact Wrench Kit
M28 1/2" Impact Wrench Tool Only
Volts:
28 V DC / 3.0 Amp-Hrs.
No Load RPM: 0-1000 High / 0-400 Low
Max Torque: 0-1081 in.-lbs. Low Gear
Weight:
10.9 lbs. w/battery / 8.6 lbs w/o battery
Part No.
Description
0721-21
0721-20
M28 ½" Right Angle Drill Kit
M28 ½" Right Angle Drill Tool Only
Tools
0756-22
0799-20
Abrasives
Lithium-Ion
1" Compact SDS Rotary Hammer
Lithium-Ion
7/16" Quick-Change Impact Wrench
OnSite
Supply
• Variable speed control.
• Magnesium Gearcase for added durability and lighter weight.
• Reversible Battery Pack allows users to change tool balance for
overhead work or to fit in tight places.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available as TOOL ONLY. Batteries and charger sold seperately
Specifications
Safety
Volts:
Max. Torque:
No Load RPM:
Impacts per Minute:
Weight:
28 V DC / 3.0 Amp-Hrs.
325 ft.-lbs. / 3900 in.-lbs.
0-1,450
0-2,450
7.6 lbs w/o battery
Rentals
Description
0799-20
M28 7⁄16" Quick-Change Impact Wrench Tool Only
Hartford, CT
800-969-0285
• KIT Includes (2) batteries, 1 hour charger, side handle, depth
guage and impact-resistant case.
Specifications
Part No.
250
• 3 modes of operation - Hammer Drill / Drill / Chipping.
• Compact L-Shaped design. Only 11-1/8" from grip to chuck for
easy access to tight spaces.
• Heavy-duty metal gear box and block construction.
• Keyless SDS chuck for fast, tool-free bit changes.
• Variable speed trigger & reverse switch for accurate drill bit starting &
easy bit/fastener removal.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY (incl. side handle & depth guage).
Volts:
No Load RPM:
No Load BPM:
Impact Energy:
Weight:
28 V DC / 3.0 Amp-Hrs.
0-1400
4700
2.1 ft.-lbs.
9.6 lbs. w/battery / 7.3 lbs w/o battery
Part No.
Description
0756-22
0756-20
M28 1" Compact SDS Rotary Hammer Kit
M28 1" Compact SDS Rotary Hammer Tool Only
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
0730-22
Fasteners
Anchors
M28™ Li-Ion cordless
Strut
0740-22
• Lightweight aircraft aluminum shoe and
magnesium upper and lower Guards
reduce fatigue and are rugged enough
for the job site.
• Large, impact-resistant window for clear
line of sight.
• Electric brake for quick blade stops.
• LED light for greater cutting visibility.
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (Includes 1-36T Blade, Wrench, Rip Fence
& Safety Glasses).
• Over 200 cuts of 1" conduit per battery
charge.
• Deep 4¾" x 4¾" cutting capacity. Cuts
as fast as the corded version.
• High/Low speed selector switch with lock.
• Two-finger trigger speed control.
• Blade tightening Lever provides quick
and easy blade changes.
• LED light for greater cutting visibility.
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (Includes
1-14TPI Blade).
• KIT Includes 1-36T Blade, Wrench, Rip
Fence, Safety Glasses, (2) batteries, 1
hour charger and impact-resistant case.
• KIT Includes 1-14TPI Blade, (1) battery,
1 hour charger and impact-resistant case.
Volts:
28 V DC / 3.0 Amp-Hrs.
Blade Size:
6¼"
No Load RPM: 4,200
Weight:
8.9 lbs. w/battery
7.1 lbs w/o battery
Part No.
Description
0730-22 M28 6-1/4" Circular Saw Kit
0730-20 M28 6-1/4" Circular Saw Tool
Only
Specifications
Volts:
28 V DC / 3.0 Amp-Hrs.
Blade Size:
6¼"
No Load RPM: 4,200
Weight:
8.9 lbs. w/battery
7.1 lbs w/o battery
Part No.
0740-22
0740-20
Description
M28 6¼" Circular Saw Kit
M28 6¼" Circular Saw Tool
Only
Specifications
Volts:
28 V DC / 3.0 Amp-Hrs.
No Load SFPM: High 0-350 / Low 0-225
Weight:
19.6 lbs. w/battery
17.3 lbs w/o battery
Part No.
Description
0729-21 M28 Band Saw Kit
0729-20 M28 Band Saw Tool Only
OnSite
Supply
Lithium-Ion
Grinder/Cut-Off Tool
• 28V™ motor delivers 8000 RPM no load speed
• Overload protection for preventing over-heating
• Soft start reduces start-up torque and improves gear life
• Large spindle lock for quick wheel replacement
• Tool free guard provides easy guard adjustment
• Slide on switch reduces user fatigue
• Fuel gauge indicates remaining run time
• Available in KIT or TOOL ONLY).
0725-21
Specifications
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Volts:
28 V DC / 3.0 Amp-Hrs.
No Load RPM: 0-1000 High / 0-400 Low
Max Torque: 0-1081 in.-lbs. Low Gear
Weight:
10.9 lbs. w/battery / 8.6 lbs w/o battery
Part No.
Description
0725-21
0725-20
M28 Grinder/Cut-Off Tool
M28 Grinder/Cut-Off Tool Only
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
• KIT Includes (1) battery, 1 hour charger, spanner wrench,
(1) Type 1 metal cut-off wheel, (1) Type 27 metal grinding wheel
and contractor bag.
251
Rentals
Specifications
Pipe
Hangers
• Lightweight aircraft aluminum shoe and
magnesium upper and lower Guards
reduce fatigue and are rugged enough
for the job site.
• 50° bevel capacity easily adjusts for a
wide range of cuts.
• Electric brake stops blade in less than 2
seconds for fast, repetitive cuts..
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (Includes
1-24T Blade, Wrench & Rip Fence).
• KIT Includes 1-24T Blade, Wrench, Rip
Fence, (2) batteries, 1 hour charger and
impact-resistant case.
Lithium-Ion Portable Deep
Cut Band Saw
Tools
Lithium-Ion
Metal Cutting Circular Saw
Abrasives
Lithium-Ion
Wood Cutting Circular Saw
Threaded
Rod
0729-21
Fasteners
M28™ li-ion cordless
Combination Kits
Anchors
Combination Kits
0928-29
• Three M28 Tools or Four M28 Tools in one convenient pack!
4 Tool Combo Kit 0928-29
Strut
0928-23
Threaded
Rod
•
•
•
•
•
3 Tool Combo Kit 0928-23
0719-20 V28™ Sawzall® Recip Saw
0724-20 V28™ ½" Hammer Driver/Drill
0730-20 V28™ 6½" Circular Saw
49-24-0185 V28™ Work Light
Also Includes: (2) V28™ Battery Packs,
Clip-Lok™ System, Side Handle, #2
Phillips Bit, 6½" 24T Carbide-tipped
Blade, Rip Fence, 2-Pack Sawzall®
Blades, 1-Hour Lithium-Ion Charger
and Contractor's Bag.
Part No.
Description
•
•
•
•
0719-20 V28™ Sawzall® Recip Saw
0724-20 V28™ ½" Hammer Driver/Drill
49-24-0185 V28™ Work Light
Also Includes: (2) V28™ Battery Packs,
Clip-Lok™ System, Side Handle, #2
Phillips Bit, 2-Pack Sawzall®
Blades, 1-Hour Lithium-Ion Charger
and Contractor's Bag.
Part No.
0928-29 M28 4-Tool Combo Kit Kit
Description
0928-23 M28 3-Tool Combo Kit
Accessories
Pipe
Hangers
Tools
Universal Li-Ion/Ni-Cad 18V &
28V Charger
28V Li-Ion Battery Pack
Abrasives
OnSite
Supply
• Delivers 2x the run-time vs. 18V NiCad
batteries.
• No memory effect irregardless of the
pack's current charge level.
• Lighter weight than 18V NiCd & NiMH packs.
• Provides up to 2½ times more lifetime
work output when compared today's 18V
NiCd.
• Battery fuel gauge indicates how much
charge is left in battery.
• Fade-free power, V28 Li-Ion batteries
maintain their power level throughout
their entire discharge cycle.
Specifications
Safety
Voltage:
28 V DC, 3.0 Amp-hr
Compatible With: Milwaukee V28 Tools
Weight:
2.4 lbs.
Part No.
Description
48-11-2830 M28 Replacement Battery
• Compatable with ALL Milwaukee 18-28V
Li-Ion/NiCad Batteries.
Part No.
Description
48-59-2818
M28 Universal Li-Ion/NiCad 18V/28V Charger
Jobsite
Radio
• AM/FM Tuner with
Digital Processor
• Premium speakers
and 40 watt amplifier
• Weather sealed auxiliary compartment - Protects MP3 players and other audio devices
• ABS polymer and steel construction
• Equalizer and 10-station presets
• AC/DC Versatility - Powered by Milwaukee M12™, M18™, V18™, M28™ , NiCd
12V to 28V, and AC outlet
• Built-in bottle opener
• 12V DC Output - Charges most small
electronic devices
Part No.
Description
Rentals
2790-20 M18 Jobsite Radio
252
Multi-Bay Charger for All Slide-On
Nicd, V18/V28 Li-Ion Batteries
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
• Smart charger for use with Milwaukee
V28 LITHIUM-ION, V18 LITHIUM-ION
and NiCd batteries.
• Convenient built-in cord wrap also acts as
shock absorber.
• High visibility LED for charge status
indication.
Part No.
Description
48-59-0280 Multi-Bay Charger
Worklight
• Clip-Lok™ system ready.
• 140° pivoting head.
Part No.
Description
49-24-0185 M28 Li-Ion Work Light
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
NANO™ Cordless Tool System
Lightweight Design
Up to 50% More Runtime than
18V NiCad
• 2.0 lbs, the same weight as DeWalt 14.4V NiCad batteries
• DeWalt's Heavy-Duty 28V NANO™ Phosphate Lithium Ion batteries delivers 50%
more runtime vs. 18V NiCad batteries.
Strut
No Memory & Virtually
No Self-Discharge
• For maximum productivity and
less downtime.
Part No.
Description
Li-ion
DC910KL
28V Recirocating Saw Kit
• 6-1/2" carbide tipped blade for cutting
common materials at 90° and 45°.
• 28V high performance battery pack
provides long run-time and battery life.
• 3,850 RPM for fast rip cuts & cross cuts.
• 0-50° bevel capacity allows for aggressive
bevel cuts for a multitude of applications.
• High strength magnesium shoe and upper guard provides increased durability
for long-term cut accuracy.
`• Fan-cooled motor with replaceable brushes for maximum power and durability
• Anti-slip comfort grip for better control.
• KIT Includes (1) battery, 1 hour charger,
16T Carbide Saw Blade, Rip fence &
impact-resistant case.
Specifications
Volts:
28 V DC
No Load Speed:
3850 rpm
Blade Diameter:
6-1/2"
Bevel Capacity:
0-50°
Keyless Blade Clamp: Yes
Weight:
8.0 lbs.
Part No.
DC310K
Specifications
Volts:
28 V DC
Strokes per Minute: 0-3,000 spm
Stroke Length:
1-1/8"
Electric Brake:
Yes
Keyless Blade Clamp: Yes
Weight:
8.0 lbs.
Part No.
DC315K
Description
28V Reciprocating Saw Kit
Description
28V 6-1/2" Circular Saw Kit
28
volt
28V ½" Hammerdrill/
Drill/Driver Kit
• DEWALT® built high power, high efficiency
motor for superior performance in all
drilling and fastening applications.
• 28V high performance battery pack
provides long run-time and battery life.
• Patented 3-speed all-metal transmission
for optimal performance.
• Heavy-duty ½" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength.
• Anti-Slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & impact-resistant case.
Specifications
Volts:
28 V DC
Max. Power:
650 UWO
# of Speed Settings: 3
Max RPM:
0-400/0-1,200/
0-1,600
Max BPM
0-6,800/0-20,400
0-27,200
Clutch Settings:
22
Weight:
6.9 lbs.
Part No.
Description
Tools
28V 6-1/2" Circular Saw Kit
• 1-1/8" stroke length and 0-3,000 spm for
fast cutting.
• 28V high performance battery pack
provides long run-time and battery life.
• 4-position keyless blade clamp allows
quick blade change, flush cutting, and
versatility.
• 3-position adjustable shoe for adjusting
depth of cut and extends blade life.
• DeWalt built high power, and high efficiency motor with electric brake powers
through the toughest applications
• Anti-slip comfort grip for better control.
• KIT Includes (1) battery, 1 hour charger,
reciprocating saw blade & impact-resistant
case.
Abrasives
DC310K
Li-ion
Li-ion
28
Pipe
Hangers
DC315K
volt
OnSite
Supply
28
2,000 Recharges
Threaded
Rod
28V NANO™ Replacement Battery
28V-36V 1 Hour Charger
Safety
DC9280
DC9000
volt
Fasteners
28V NANO™ Li-Ion Cordless
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
253
Rentals
DC910KL 28V 1/2" Hammerdrill/Drill/
Driver Kit
Fasteners
28V Li-ION Cordless
NANO™ Cordless Tool System
Li-ion
Anchors
28
DC318K
volt
DC810KL
Li-ion
28
Threaded
Rod
28V
1/2" Torque Impact Wrench Kit
Pipe
Hangers
Tools
• Heavy-duty impact mechanism delivers superior torque for heavy-duty applications.
• Heavy-duty all-metal anvil provides durability and prevents shearing.
• High speed all-metal transmission delivers
2,400 rpm for increased productivity.
• High power, high efficiency motor delivers maximum performance in all fastening applications.
• Variable speed reversible switch provides full-range control for both setting
and removing fasteners.
• Electric brake allows for precise setting
of fasteners.
• DeWalt exclusive NANO™-phosphate
lithium ion cells offer long battery life &
durability.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour charger & impact-resistant case.
Specifications
Abrasives
volt
28V
1" SDS Rotary Hammer Kit
volt
Part No.
• SHOCKS™ Active Vibration Control significantly reduces vibration & increases user
comfort & productivity.
• Optimally balanced compact L-shape
design allows access in tight spaces.
• 2.0 ft-lbs impact energy provides corded
power without the cord.
• DEWALT® built high torque, high efficiency
motor delivers maximum performance in
all drilling applications.
• 28V high performance battery pack
provides long run-time & battery life.
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism
for fast penetration & low vibration.
• 360° side handle for better control &
ease of use in tight spaces.
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Specifications
Volts:
28 V DC
No Load Speed:
2,400 RPM
Impacts per Minute: 3,000 BPM
Max Torque:
1,920 in.-lbs.
160 ft.-lbs.
Weight:
5.0 lbs.
Volts:
No Load Speed:
Blows per Minute:
Weight:
Part No.
Li-ion
Strut
28
DC228KL
28V Jig Saw Kit
• All-metal, lever-action keyless blade change
allows for quick & easy blade changes.
• All-metal keyless shoe bevel with detents
at 0°, 15°, 30° and 45° provides versatility
for easy bevel cutting.
• 4-position orbital action provides control
of aggressiveness of cut and speed.
• Adjustable dust blower keeps line of cut
clear of chips.
• 28V high performance battery pack provides long run-time & battery life.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (1) battery, 1 hour charger,
(1) jig saw blade & impact-resistant case.
Specifications
Volts:
28 V DC
Strokes per Minute: 0-2,700 SPM
Stroke Length:
1"
Electric Brake:
Yes
Weight:
7.2 lbs.
Part No.
Description
DC318K
28V Jig Saw Kit
28 V DC
0-1,150 RPM
0-4,400 BPM
7.6 lbs.
Description
DC228KL 28V 1" SDS Rotary Hammer Kit
Description
DC810KL 28V 1/2" Impact Wrench Kit
OnSite
Supply
28V 4½" Cut-Off Tool Kit
DC413KL
Safety
Li-ion
28
volt
Rentals
254
• Convenient trigger switch with lock-off
button for easier gripping.
• 2 Position side handle offers greater
comfort and control.
• Quick-change wheel release provides
easier and quicker wheel removal without the need for a wrench.
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing access to tight spaces.
• KIT Includes (2) batteries, 1 hour charger,
(1) Type 27 Guard, (1) Type 1 Guard,
Wrench, Matched Flanges, Type 27 Grinding Wheel, Type 1 Cutting Wheel, side
handle & impact-resistant case.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Specifications
Volts:
No Load Speed:
Spindle Thread:
Wheel Selection:
Weight:
Part No.
28 V DC
6,500 RPM
5/8"-11
Above 10,000 RPM
7.2 lbs.
Description
DC413KL 28V 4½"cut-Off Tool Kit
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Li-ion
2 Tool Combo Kit DCX5200
volt
• Two 28V Tools or Four 28V Tools in
one convenient pack! Three kits to
choose from.
DCX5200
DCX5210
DC315K Reciprocating Saw
DC910KL ½" HammerDrill/Drill/Driver
DC310K 6½" Circular Saw
DC599 Flexible Floodlight
Also Includes: (2) 28V Battery Packs,
360° Side Handle, #2 Phillips Bit,
6½" Carbide-tipped Saw Blade,
rip fence, reciprocating saw blade,
1-Hour Charger & Kit Box.
Part No.
Li-ion
28
•
•
•
•
•
Description
DCX5200 28V - 2 Tool Combo Kit
•
•
•
DC910KL ½" HammerDrill/Drill/Driver
DC305 Reciprocating Saw
Also Includes: (2) 28V Battery Packs,
360° Side Handle, reciprocating saw
blade, 1-Hour Charger
& Contractor's Bag.
Description
DCX5210 28V - 2 Tool Combo Kit
Li-ionLi-ion
36
DC509
DC519
volt
28
volt
Li-ion
28
Fasteners
2 Tool Combo Kit DCX5210
Part No.
Description
DCX5401 28V - 4 Tool Combo Kit
volt
DC910KL ½" HammerDrill/Drill/Driver
DC310K 6½" Circular Saw
Also Includes: (2) 28V Battery Packs,
360° Side Handle, 6½" Carbide-tipped
saw blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No.
4 Tool Combo Kit DCX5401
•
•
•
Threaded
Rod
Combination Kits with
NANO™ Technology
Pipe
Hangers
28
DCX5401
Anchors
Combination Kits with NANO™ Technology
Strut
28V Li-Ion cordless
volt
Tools
Accessories
36
Li-ion
Li-ion
28
volt
volt
Voltage:
Compatible With:
Weight:
Part No.
DC9280
28 V DC
Entire line of DeWalt
28V Tools
2.0 lbs.
Description
28V Battery Pack w/NANO™
Technology
Philadelphia, PA
610-647-8070
36V & 28V Floodlight
28V - 36V 1 Hour Charger
• 1-Hr Charging for minimal downtime.
• 3-Stage charging system provides maximum run-time and extends overall life of
battery.
• Battery fuel gauge indicates how much
charge is left in battery.
• Cord wrap for improved cord storage.
• Flex neck design with lockable head clips
allow for hands free use and versatility
to stand or hang light.
• Wide angle beam of light provides more
light than a conventional flashlight.
• Xenon bulb provides extra bright beam
of light.
• 8 hours run-time on a single charge.
Specifications
Specifications
Voltage:
Bulb:
Compatible With:
Weight:
Part No.
DC9000
Washington D.C.
877-419-2755
28 - 36 V DC
Xenon
28-36V DeWalt
Battery Packs
1.9 lbs.
Description
28V-36V Battery Charger
Boston , MA
800-645-6155
28V & 36 V DC
Xenon
8 hours
1.14 lbs.
Volts:
Bulb:
Run-Time:
Weight:
Part No.
DC509
DC519
Hartford, CT
800-969-0285
Description
Safety
Specifications
DC9000
36V Floodlight
28V Floodlight
255
Rentals
• Provides high power for corded performance.
• Up to 50% more run-time vs. 18V NiCad
batteries.
• Offers long-life and durability - 2000
recharges
• Lightweight design - 2.0 lbs, the same as
DeWalt 14.4V NiCd battery
• Battery fuel gauge indicates how much
charge is left in battery.
• No memory and virtually no self-discharge.
OnSite
Supply
28V Battery Pack with
NANO™ Technology
Abrasives
DC9280
Fasteners
18V Li-Ion Cordless
M18™ XC High Capacity Lithium-Ion Battery
Anchors
Digital Power Management
provides Overload Protection,
Temperature Management,
Individual Cell Voltage
Monitoring and Discharge
Protection
Increased Run-Time
• Milwaukee's 18 volt, M18 XC High Capacity
Lithium-Ion battery features increased runtime
with 40% less weight than an 18V NiCd battery.
Battery Fuel Gauge displays
remaining run-time
5-year/2000 Charge Warranty
Strut
No Memory Effect
• M18 batteries can be recharged at any time
without creating a memory effect, regardless of the
pack's current charge level
Part No.
48-11-1828
Milwaukee Digital Power Management
Threaded
Rod
Pipe
Hangers
• Overload Protection - Prevents user from
damaging their cordless power tool investment
in abusive situations.
• Temperature Management System - Keeps
battery in ideal temperature range to provide
maximum life.
• Individual Cell Voltage Monitoring - Ensures
optimal charge and discharge for maximum life.
• Discharge Protection - Prevents cell damage
from over-discharge
Description
M18 XC Replacement Battery
M18™ Compact Lithium-Ion Battery
Digital Power Management
provides Overload Protection,
Temperature Management,
Individual Cell Voltage
Monitoring and Discharge
Protection
Battery Fuel Gauge displays
remaining run-time
Equivalent run-time with 40% less
weight than an 18V NiCad battery
2-Year Warranty
Part No.
48-11-1815
Description
M18 Compact Replacement Battery
Tools
18V Li-Ion 1/2" Hammer Drill/Driver
Abrasives
• 4-Pole frameless motor: Delivers 550 in-lbs of peak torque, 0-450/0-1,700
RPM, & 29,000 BPM.
• Compact & Ergonomic Design: 8-1/2" Length.
• DPM - Digital Power Management: Overload protection prevents damage
to the tool and battery in abusive situations.
• All Metal Gear Case: The only metal gear case in its class.
• All Metal 1/2" Single Sleeve Ratcheting Chuck: Provides maximum durability and bit retention
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries (available with either High Capacity XC or
Compact Li-Ion batteries, 1 hour charger, and Kitbox.
2602-22
OnSite
Supply
Specifications
Safety
Rentals
256
Hartford, CT
800-969-0285
Volts:
No Load RPM:
No Load BPM:
Torque:
Weight:
18 Volts DC
0-450 / 0-1700
0-29,000
550 in-lbs.
4.9 lbs. w/battery / 4.4 lbs w/o battery
Part No.
Description
2602-22
2602-22CT
2602-20
M18 1/2" Hammer Drill/Driver Kit w/ XC Battery
M18 1/2" Hammer Drill/Driver Kit w/ Compact Battery
M18 1/2" Hammer Drill/Driver, Tool Only
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
18V Li-Ion 1/2" Hammer Drill/Driver
2611-24
• Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time
• ½" single-sleeve ratcheting metal chuck with carbide jaws
• On-board Battery Fuel Gauge displays remaining run-time
• Built-in LED Light illuminates work surface
• Variable speed trigger
• Available in KIT or TOOL ONLY.
Specifications
18 Volts DC
0-450 / 0-1800
0-28,000
650 in-lbs.
5.3 lbs. w/battery
Part No.
Description
2611-24
2611-20
M18 High Performance 1/2" Hammer Drill/Driver Kit
M18 High Performance 1/2" Hammer Drill/Driver, Tool Only
Threaded
Rod
Volts:
No Load RPM:
No Load BPM:
Torque:
Weight:
18V Li-Ion 1/2" Drill/Driver
2610-24
• Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time
• ½" single-sleeve ratcheting metal chuck with carbide jaws
• On-board Battery Fuel Gauge displays remaining run-time
• Built-in LED Light illuminates work surface
• Variable speed trigger
• Available in KIT or TOOL ONLY.
Pipe
Hangers
Fasteners
Strut
• KIT Includes (2) XC batteries, 1 hour charger, side handle and carrying case.
Anchors
18V Li-Ion Cordless
• KIT Includes (2) batteries, 1 hour charger, side handle and carrying case.
Volts:
No Load RPM:
No Load BPM:
Torque:
Clutch Settings:
Weight:
18 Volts DC
0-450 / 0-1800
0-28,000
650 in-lbs.
24
5.3 lbs. w/battery
Part No.
Description
2610-24
2610-20
M18 1/2" High PErformance Drill/Driver Kit
M18 1/2" High Performance Drill/Driver, Tool Only
Abrasives
Tools
Specifications
18V Li-Ion Compact 1/2" Driver Drill
2601-22
OnSite
Supply
Co
mp
ac
t
• 1/2 in. Ratcheting Chuck with plastic sleeve
• Heavy-Duty 2-Speed Metal Gear Box: 0-350/0-1,400 rpm
• Compact Length (7-3/4 in.) fits in tight areas
• Compact Motor delivers 400 in.-lbs. of maximum torque
• Built-in LED light illuminates work surfaces
• Available in KIT or TOOL ONLY.
• KIT Includes (1) Compact battery, 1 hour charger, keyless chuck and carrying case.
Specifications
18 Volts DC
0-350 / 0-1400
0-28,000
400 in-lbs.
Clutch Settings:
Capacity in Steel:
Capacity in Wood:
Weight:
Part No.
Description
2601-22
2601-20
M18 1/2" Compact Driver Drill Kit
M18 1/2" Compact Driver Drill, Tool Only
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
21
1/2"
1"
4.0 lbs. w/battery
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Volts:
No Load RPM:
No Load BPM:
Torque:
257
Rentals
Fasteners
18V Li-Ion Cordless
Anchors
18V Li-Ion 3/4" High Torque Impact Wrench with Friction Ring
• Delivers 525 ft- lbs of torque
• Compact Size/Light Weight: 9” length and 6.8 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 3/4” Anvil w/Friction Ring: Provides quick and easy, one-handed socket changes
• Available in KIT or TOOL ONLY.
Strut
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts:
No Load RPM:
No Load IPM:
Torque:
18 Volts DC
0-19,000
0-2,200
525 ft.-lbs.
Anvil Size:
Anvil Type:
Weight:
3/4" Square
Friction Ring
6.7 lbs. w/battery
Threaded
Rod
Part No.
Description
2664-22
2664-20
M18 3/4" High Torque Impact Wrench Kit
M18 3/4" High Torque Impact Wrench, Tool Only
2664-22
18V Li-Ion 7/16" Hex High Torque Impact Wrench
Pipe
Hangers
• Delivers 350 ft- lbs of torque
• Compact Size/Light Weight: 9-1/2” length and 7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 7/16” Hex Chuck: Provides quick and easy accessory changes
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Tools
2665-22
Volts:
No Load RPM:
No Load IPM:
Torque:
18 Volts DC
0-19,000
0-2,200
350 ft.-lbs.
Anvil Size:
Anvil Type:
Weight:
7/16" hex
hex Chuck
6.7 lbs. w/battery
Part No.
Description
2665-22
2665-20
M18 7/16" Hex High Torque Impact Wrench Kit
M18 7/16" Hex High Torque Impact Wrench, Tool Only
Abrasives
18V Li-Ion 1/2" High Torque Impact Wrench with Friction Ring
OnSite
Supply
• Delivers 450 ft- lbs of torque
• Compact Size/Light Weight: 8-7/8” length and 6.7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 1/2” Anvil w/Friction Ring: Provides quick and easy, one-handed socket changes
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
2663-22
Specifications
Safety
Rentals
258
Volts:
No Load RPM:
No Load IPM:
Torque:
18 Volts DC
0-19,000
0-2,200
450 ft-lbs.
Anvil Size:
Anvil Type:
Weight:
1/2" Square
Friction Ring
6.7 lbs. w/battery
Part No.
Description
2663-22
2663-20
M18 1/2" High Torque Impact Wrench Kit
M18 1/2" High Torque Impact Wrench, Tool Only
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
18V Li-Ion Cordless
18V Li-Ion 1/2" High Torque Impact Wrench with Detent Pin
• Delivers 450 ft- lbs of torque
• Compact Size/Light Weight: 8-7/8” length and 6.7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 1/2” Anvil w/Pin Detent: Provides maximum socket retention
• Available in KIT or TOOL ONLY.
Strut
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts:
No Load RPM:
No Load IPM:
Torque:
18 Volts DC
0-19,000
0-2,200
450 ft-lbs.
Anvil Size:
Anvil Type:
Weight:
2662-22
1/2" Square
Detent Pin
6.7 lbs. w/battery
Description
2662-22
2662-20
M18 1/2" High Torque Impact Wrench Kit
M18 1/2" High Torque Impact Wrench, Tool Only
Pipe
Hangers
Co
18V Li-Ion Cordless 1/2" Compact Impact Wrench
• Milwaukee Designed Impact Mechanism: maximum application speed
• Milwaukee 4-Pole Frameless Motor: maximum efficiency and run-time
• 1/2" Detent Pin: provides positive bit retention
• Built-In LED Light: illuminates work surface
• Belt clip allows for easy portability.
• Available in KIT or TOOL ONLY.
mp
ac
t
Part No.
Threaded
Rod
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip & carrying case.
1/2"
Detent Pin
4.1 lbs. w/battery
Part No.
Description
2652-22
2652-20
M18 1/2" Compact Impact Wrench Kit
M18 1/2" Compact Impact Wrench, Tool Only
18V Li-Ion Cordless 3/8" Compact Impact Wrench
• Milwaukee Designed Impact Mechanism: maximum application speed
• Milwaukee 4-Pole Frameless Motor: maximum efficiency and run-time
• 3/8" Friction Ring: allows quick socket changes
• Built-In LED Light: illuminates work surface
• Belt clip allows for easy portability.
• Available in KIT or TOOL ONLY.
2652-22
Abrasives
Anvil Size:
Anvil Type:
Weight:
OnSite
Supply
18 Volts DC
0-2,200
0-3,200
2,200 in-lbs.
t
Volts:
No Load RPM:
No Load IPM:
Torque:
Co
mp
ac
Tools
Specifications
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip & carrying case.
Specifications
18 Volts DC
0-2,200
0-3,200
2,000 in-lbs.
Anvil Size:
Anvil Type:
Weight:
3/8"
Friction Ring
4.1 lbs. w/battery
Part No.
Description
2651-22
2651-20
M18 3/8" Compact Impact Wrench Kit
M18 3/8" Compact Impact Wrench, Tool Only
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Safety
Volts:
No Load RPM:
No Load IPM:
Torque:
2651-22
Hartford, CT
800-969-0285
259
Rentals
Fasteners
18V Li-Ion Cordless
Anchors
Strut
Co
mp
ac
t
18V Li-Ion 1/4" Hex Compact Impact Driver
• ¼" Hex quick change allows for easy bit changes.
• Milwaukee designed impact mechanism provides faster application speed.
• 4-Pole Frameless Motor maximizes tool efficiency to increase run-time.
• On-board battery fuel gauge displays remaining run-time.
• Built-in LED Light illuminates work surface
• Variable speed trigger.
• Belt clip allows for easy portability.
• Also available with (2) 18V Li-Ion Compact Batteries
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip, & carrying case.
Specifications
Threaded
Rod
Volts:
No Load RPM:
No Load IPM:
Part No.
2650-22
18 Volts DC
0-2,200
0-3,200
Torque:
Anvil Type:
Weight:
1400 in-lbs.
1/4" Hex
3.5 lbs. w/battery
Description
2650-22 M18 1/4" Hex Impact Driver Kit, with XC High Capacity Battery
2650-21 M18 1/4" Hex Impact Driver Kit, with Compact Battery
2650-20 M18 1/4" Hex Impact Driver, Tool Only
Pipe
Hangers
Tools
2620-22
2680-22
Abrasives
18V Li-Ion 4-1/2" Grinder/Cut-Off Tool
OnSite
Supply
• 4-Pole Motor- Delivers maximum power when cutting or grinding
• Overload Protection - Prevents damage to the tool and battery
in abusive situations
• Debris Baffles - Keeps debris from entering the tool and damaging the internal components to help increase tool life.
• Tool Free, Burst Resistant Guard - Quick, easy guard adjustments.
• Paddle Switch Design - The only cordless cut-off /grinder in the
market with a paddle switch design
• Up to 35% faster cutting speed
• Up to 50% more cuts on a single charge
• 3-Position Side Handle - Provides optimal control and versatility
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, Type 1
Guard, Type 27 Guard, Type 1 Cut-Off wheel, Spanner Wrench,
Side handle & Contractor bag.
Specifications
Safety
Volts:
18 Volts DC
RPM's:
9,000
Handle Positions: 3
Part No.
Spindle Lock: Yes
Switch Type: Paddle
Weight:
5.9 lbs. w/battery
18V Li-Ion
Sawzall® Reciprocating Saw Kit
• Patented Gear-Protecting Clutch extends the life of the tool.
• Lever Action QUIK-LOK™ Blade Clamp.
• On-board battery fuel gauge displays remaining run-time.
• Built-in LED Light illuminates work surface
• Variable speed trigger.
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, (1) General
Purpose Sawzall® blade, & carrying case.
Specifications
Volts:
Strokes per Minute:
Stroke Length:
Overall Length:
Tool Weight:
Part No.
18 V DC
0-3,200 SPM
1"
17-3/4"
18.3 lbs.
Description
2620-22 M18 Sawzall® Recip Saw Kit
2620-20 M18 Sawzall® Recip Saw, Tool Only
Description
2680-22 M18 4-1/2" Grinder / Cut-Off Tool Kit
2680-20 M18 4-1/2" Grinder / Cut-Off Tool, Tool Only
Rentals
260
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
18V Li-Ion Cordless
2629-22
Volts:
Strokes per minute:
Stroke length:
Bevel Capacity:
Orbital Settings:
Tool Weight:
Part No.
18 V DC
2,200 SPM
1"
45 degree
5
7.75 lbs.
Description
2645-22 M18 Jig Saw Kit
2645-20 M18 Jig Saw, Tool Only
Part No.
18 V DC
3,500 RPM
2-1/8" @ 90°,
1-5/8" @ 45°
5/8"
6-1/2" 24T
Carbide Tipped
Lock-off
8.5 lbs.
Description
2630-22 M18 6-1/2" Circular Saw Kit
2630-20 M18 6-1/2" Circular Saw,
Tool Only
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger, Blade, & case.
Specifications
18V Li-Ion Wet/Dry Vacuum
• KIT Includes Filter Assembly, Crevice Tool,Wide Utility Nozzle, Wireless Vinyl Hose,
Battery Pack & Charger NOT INCLUDED.
0880-20
Specifications
Volts:
18 V DC
Material:
Wet or Dry
Capacity:
2 Gallon
Max Air Flow:
45 cu. ft./min
Sealed Suction in Water: 32 in.
Tool Weight:
9.4 lbs.
Part No.
Volts:
SFPM:
No Load Speed
Loaded Speed
Max Capacity:
Blade Length:
Tool Weight:
Part No.
18 V DC
480
480
390
3-1/4"
35-3/8"
10.25 lbs.
Description
Description
0880-20 18V Wet/Dry Vacuum Kit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Threaded
Rod
2629-22 M18 Compact Band Saw Kit
2629-20 M18 Compact Band Saw,
Tool Only
Safety
• Works on all Milwaukee 18V slide-on batteries, LITHIUM-ION or NiCd
• Powerful motor to provide strong suction and air flow
• Tool box style – easy transport and storage
• Reusable wet/dry filter for both wet and dry applications
Pipe
Hangers
Volts:
Speed:
Capacity:
Arbor:
Blade:
Trigger:
Tool Weight:
Tools
Specifications
Specifications
• 45% Lighter than Deep Cut – 10.25 Lbs
compact light weight design for cutting
overhead and in tight places.
• 3-1/4” Cut Capacity – cuts most common
materials for Electrician, Plumber and
Mechanical cutting applications. Single
pass cut on 3” copper, 3” angle iron,
2-1/2” conduit.
• Tool-Free Adjustable Material Shoe –
quickly adjusts the shoe and allows flush
cuts when working with installed materials
against walls and ceilings.
• LED Work Light – illuminates the cut line
in dark areas.
• Blade Ejection System – Quickly change
the blade by moving the material guide
into the up position and depressing the
blade ejection button.
• Drop Resistant Pulley Guard –
Engineered geometries & high impact
polymer.
• Cast Aluminum Gear Case – Withstands
jobsite abuse & maintains gear positioning.
OnSite
Supply
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger , Jig-saw blade, non-marring
shoe & carrying case.
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger & contractor bag.
18V Li-Ion Compact
Bandsaw Kit
Hartford, CT
800-969-0285
261
Rentals
18V Li-Ion Jig Saw Kit
• Quik-Lok™ blade clamp - Provides fast
and easy keyless blade change.
• Tool-free shoe bevel allows for a maximum 45° bevel in either direction with
detents at 0°, 15°, 30°, and 45°.
• Position Orbital Cutting - most versatility
for application specific cutting than any
cordless jig saw on the market.
• Over-Molded Grip with variable speed
trigger
• Non-Marring Shoe
• Heavy-Duty Magnesium Guards for maximum durability.
• Ergonomic, compact and lightweight
design with soft-grip handle for operator
comfort.
• Electronic brake stops blade quickly.
• On-board battery fuel gauge displays
remaining run-time.
• Aircraft aluminum shoe provides greater
accuracy.
Abrasives
18V Li-Ion
6-1/2" Circular Saw Kit
2645-22
Strut
2630-22
Fasteners
18V Li-Ion Cordless
Combination Kits
Anchors
KIT COMPONENTS
2-Tools
2-Tools
2-Tools
3-Tools
3-Tools
4-Tools
4-Tools
4-Tools
4-Tools
2690-22
2691-22
2693-22
2691-23
2696-23
2690-24
2691-24
2692-24
2694-24
2601-20
M18 1/2" Compact
Drill Driver
Strut
2602-20
M18 1/2" Hammer
Drill Driver
Threaded
Rod
2611-20
M18 High Performance
Hammer Drill-Driver
(Includes Side-Handle)
2620-20
M18 SAWZALL®
Recip Saw
(Incl. G.P. SAWZALL® Blade)
2630-20
M18 6-1/2" Circular Saw
Pipe
Hangers
(Includes 6-1/2" Blade
& Rip Fence)
2650-20
M18 1/4" Hex Compact
Impact Driver
Tools
2651-20
M18 3/4" Compact
Impact Wrench
2663-20
M18 1/2" High Torque
Impact Wrench
Abrasives
49-24-0171
M18 Work Light
ACCESSORIES INCLUDED:
(2) 48-11-1828
M18 XC High Capacity
Lithium-Ion Batteries
OnSite
Supply
(2) 48-11-1815
M18 Compact
Lithium-Ion Batteries
48-59-1801
1-Hour Charger
Safety
Contractor Bag
Carrying Case
Rentals
262
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Accessories
Strut
Anchors
2790-20
Fasteners
18V Li-Ion Cordless
49-11-1815
Part No.
Description
2790-20 M18 Jobsite Radio
Part No.
Description
48-11-1815 M18 18V Compact
Lithium-Ion Battery
18V XC High Capacity
Li-Ion Battery
• Increased run-time with 40% less weight
than an 18V NiCd battery
• Milwaukee Digital Power Management
Overload Protection - Prevents user
from damaging their cordless power tool
investment in abusive situations
• Temperature Management System Keeps battery in ideal temperature range
to provide maximum life
• Individual Cell Voltage Monitoring -
Ensures optimal charge and discharge
for maximum life
• Discharge Protection - Prevents cell
damage from over-discharge
• Battery Fuel Gauge - Displays remaining
run-time
• 5-year 2,000 Charge Warranty
Part No.
Description
49-24-0171
18V Li-Ion LED Worklight
• Ergonomic, compact, and lightweight
design for operator comfort
• Fold-away utility hook
• 135 degree rotating head
Part No.
• Ergonomic, compact, and lightweight
design for operator comfort
• Fold-away utility hook
• 135 degree rotating head
Part No.
Description
2735-20 M18 LED Worklight
Philadelphia, PA
610-647-8070
18V Li-Ion Worklight
Description
49-24-0171 M18 Worklight
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
18V Li-Ion Battery Charger
• 1-Hour Charger
• Pass-through plug design for added
outlet availability
• 5-Year Warranty
Part No.
Description
48-59-1801 M18 18V Lithium-Ion Battery
Charger
2710-20 M18 AC/DC Wall & Vehicle
18V Lithium-Ion Battery
Charger
Hartford, CT
800-969-0285
263
Safety
48-59-1801
Rentals
2735-20
OnSite
Supply
Abrasives
48-11-1828 M18 18V XC High Capacity
Lithium-Ion Battery
Threaded
Rod
• Equivalent run-time with 40% less weight
than an 18V NiCad battery
• Milwaukee Digital Power Management
Overload Protection - Prevents user
from damaging their cordless power tool
investment in abusive situations
• Temperature Management System Keeps battery in ideal temperature range
to provide maximum life
• Individual Cell Voltage Monitoring -
Ensures optimal charge and discharge
for maximum life
• Discharge Protection - Prevents cell
damage from over-discharge
• Battery Fuel Gauge - Displays remaining
run-time
• 2-year Warranty
49-11-1828
Pipe
Hangers
• AM/FM Tuner with Digital Processor Delivers highest reception accuracy and
signal clarity
• Premium speakers and 40 watt amplifier
• Weather sealed auxiliary compartment
- Protects MP3 players and other audio
devices
• Shock absorbing ABS polymer and steel
construction protects against weather
and abusive job site conditions
• Equalizer and 10-station presets
• AC/DC Versatility - Powered by Milwaukee M12™, M18™, V18™, V28® , NiCd
12V to 28V, and AC outlet
• Built-in bottle opener
• 12V DC Output - Provides power to
charge most small electronic devices
18V Compact Li-Ion Battery
Tools
Jobsite Radio
Fasteners
18V li-ion cordless
Li-Ion Cordless Tool Systems
Anchors
Compatable with ALL DeWalt 18V Tools
No Memory & Virtually
No Self-Discharge
2,000 Recharges
• For maximum productivity and
less downtime.
Strut
Lightweight Design
• 1.5 lbs, the same weight as DeWalt 12V
NiCad batteries
Part No.
DC9180
Description
18V NANO™ Replacement Battery
Threaded
Rod
Co
mp
ac
t
Pipe
Hangers
volt
18
DCD950KX
Li-ion
18
DCD970KL
NiCd
Li-ion
Tools
18
volt
DCD775KL
volt
Abrasives
OnSite
Supply
18V XRP™
1/2" Hammerdrill/Drill/Driver Kit
18V XRP™
1/2" Hammerdrill/Drill/Driver Kit
18V Compact
1/2" Hammerdrill Kit
• Patented 3-speed, all-metal transmission.
• Heavy-duty 1/2" self-tightening chuck.
• LED worklight provides better visibility.
• Best in class length for improved balance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
• Patented 3-speed, all-metal transmission.
• Heavy-duty 1/2" self-tightening chuck.
• LED worklight provides better visibility.
• Best in class length for improved balance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
Specifications
Specifications
• Lightweight design minimizes user fatigue
• Dual speed range 0-500/0-1700 rpm and
0-8,500/0-29,000 bpm
• Compact Li-Ion batteries (DC9181) are
compatible with the existing system of
DEWALT 18V power tools
• LED worklight provides increased visibility
in confined spaces
• KIT Includes (2) Compact batteries, 30
minute charger, & hard case.
Safety
Volts:
18 V DC
Max. Power:
425 UWO
# of Speed Settings: 3
Max RPM:
0-500/0-1,250/
0-2,000
Max BPM
0-8,500/0-21,250
0-24,000
Clutch Settings:
22
Weight:
5.25 lbs.
Part No.
Rentals
Volts:
18 V DC
Max. Power:
450 UWO
# of Speed Settings: 3
Max RPM:
0-500/0-1,250/
0-2,000
Max BPM
0-8,500/0-21,250
0-34,000
Clutch Settings:
22
Weight:
6.25 lbs.
Part No.
Description
DCD970KL 18V 1/2" Hammerdrill/Drill/
Driver Kit
264
Description
DCD950KX 18V 1/2" Hammerdrill/Drill/
Driver Kit
DCD950B Bare Tool Only
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Specifications
Volts:
18 V DC
Max. Power:
350 UWO
# of Speed Settings: 2
Max RPM:
0-500/0-1,700/
Max BPM
0-8,500/0-29,000
Clutch Settings:
17
Weight:
4.1 lbs.
Part No.
Description
DCD775KL 18V 1/2" Hammerdrill Kit
DCD775B Bare Tool Only
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
18V XRP™
1/2" Drill/Driver Kit
• Patented 3-speed all-metal transmission
• Heavy-duty 1/2" ratcheting chuck
• LED worklight provides increased visibility
• High power, high efficiency motor delivers
450 unit watts out of max power
• Improved balance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
Description
Volts:
18 V DC
Max. Power:
350 UWO
# of Speed Settings: 2
Max RPM:
0-500/0-1,700/
Max BPM
0-8,500/0-29,000
Clutch Settings:
17
Weight:
4.1 lbs.
Part No.
DCD760KL 18V 1/2" Drill Driver Kit
DCD760B Bare Tool Only
Description
DCD960KL 18V 1/2" Drill/Driver Kit
18V XRP™ 1/2" Impact Wrench Kit
DCF826KL
Strut
18V XRP™ Compact
Li-Ion 1/4" Impact Driver
DC827KL
OnSite
Supply
Specifications
volt
DC822KL
Volts:
18 V DC
No Load Speed:
2,400 RPM
Impacts per Minute: 2,700 IPM
Max Torque:
1,330 in.-lbs.
Weight:
3.7 lbs.
Part No.
Description
18
Safety
Li-ion
18
Li-ion
volt
DC827KL 18V 1/4" Impact Driver Kit
Description
DC822KL 18V Li-Ion Cordless XRP™ 1/2" Impact Wrench Kit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
265
Rentals
Part No.
Part No. Description
• Compact size & weight.
• Textured ant-slip comfort grip.
• Durable magnesium gear case and
all metal transmission.
• DeWalt exclusive NANO™phosphate lithium ion cells offer
long battery life & durability.
• KIT Includes (2) batteries, 1 hour
charger & hard case.
Specifications
Volts:
18 V DC
No Load Speed:
2,400 RPM
Impacts per Minute: 2,700 IPM
Max Torque:
1,740 in.-lbs.
145 ft.-lbs
Weight:
3.7 lbs.
Volts:
18 V DC
No Load Speed: 0-2,400 rpm
Impacts/Min:
0-2,700 ipm
Max. Torque: 1,330 in.-lbs.
Weight:
3.1 lbs.
18V XRP™
1/4" Impact Driver Kit
• Frameless motor for extended tool
durability and life
• Durable magnesium gear case and
all metal transmission
• Compact size & weight.
• Replaceable brushes for increased
serviceability
• Textured anti-slip comfort grip.
• Heavy duty impacting mechanism
directs torque to fastener without
kickback
• KIT Includes (2) batteries, 1 hour
charger & hard case.
Specifications
Tools
Specifications
Volts:
18 V DC
Max. Power:
350 UWO
# of Speed Settings: 2
Max RPM:
0-500/0-1,700/
Max BPM
0-8,500/0-29,000
Clutch Settings:
17
Weight:
4 lbs.
• Frameless motor for extended tool durability and life
• Replaceable brushes.
• Textured anti-slip comfort grip
• Durable magnesium gear case and all
metal transmission.
• Heavy-duty impacting mechanism directs
torque to fastener without kickback.
• KIT Includes (2) compact Li-Ion batteries, 30
minute charger & hard case
Abrasives
Specifications
Part No.
18V XRP Compact
1/4" Impact Driver
™
• Lightweight design minimizes user fatigue
• Dual speed range 0-500/0-1700 rpm and
0-8,500/0-29,000 bpm
• Compact Li-Ion batteries are compatible
with all DeWalt 18V power tools
• LED worklight provides increased visibility
• Compact size fits into tight spaces
• KIT Includes (2) Compact batteries, 30
minute charger, & hard case.
DCF826KL
volt
Threaded
Rod
18V Compact
1/2" Drill/Driver Kit
18
DCD960KL
Pipe
Hangers
18
volt
Li-ion
DCD760KL
volt
Li-ion
Li-ion
18
Co
mp
ac
t
Co
mp
ac
t
Anchors
Li-Ion Cordless Tool Systems
Fasteners
18V Li-Ion Cordless
Fasteners
18V li-ion cordless
Li-Ion Cordless Tool Systems
Anchors
DCS934KL
Li-ion
18
volt
DCG411KL
Threaded
Rod
18V XRP™ Li-Ion
4½" Cut-Off Tool Kit
Pipe
Hangers
Tools
• 6,500 rpm provides high power for cutting and grinding applications
• Convenient trigger switch with lock-off
button for easier gripping
• 2-position side handle offers greater
comfort and control
• Quick-change wheel release provides
easier and quicker wheel removal without the need for a wrench
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing access to tight spaces
• KIT Includes (2) batteries, 1 hour charger,
Type 27 & Type 1 guards, 2 matched
flanges, wrench, Type 27 wheel, 2-position
side handle & contractors bag.
18V XRP™ Li-Ion Reciprocating
Saw Kit
Abrasives
Volts:
No Load Speed:
Spindle Thread:
Spindle Lock:
Min. Wheel RPM:
Weight:
Part No.
Volts:
Strokes/min:
Stroke length:
Electric Brake:
Weight:
18 V DC
0-3,000 spm
11 ⁄ 8"
Yes
7.25 lbs.
Part No. Description
DCS385L 18V XRP™ Li-Ion Reciprocating
Saw Kit
DC385B Bare Tool Only
Volts:
18 V DC
No Load Speed: 3,100 rpm
Blade Diameter: 6¾"
Bevel Capacity: N/A
Arbor Size:
20mm
Depth of Cut:
2 3 ⁄ 8"
Weight:
8.5 lbs.
Part No.
Description
DCS934KL 18V 6¾" Metal Cutting
Circular Saw Kit
Bare Tool Only
DW934B
Description
18V Accessories
OnSite
Supply
Safety
• Compatible with all
DeWalt 18V tools.
• No memory and
virtually no selfdischarge.
• Lightweight design, 1.5 lbs., the same
weight as DeWalt 12V NiCad batteries.
Description
Rentals
DC9180 18V NANO™ Li-ion Battery
DC9180C 18V Battery / 1 Hour Charger
Combo Kit
• 6¾", 40-tooth carbide tipped blade cuts
up to 2" conduit and pipe in one pass.
• All metal upper and lower guards for
maximum durability.
• Multi-coated SIGHT-LINE™ window for
maximum abrasion resistance.
• Stainless-steel shoe stays rust free while
minimizing chip build-up which prevents
marring of the cutting surface.
• ULTRA SIGHT-LINE™ Scope allows maximum
visibility to the cut line.
• KIT Includes (2) batteries, 1 hour charger,
40 tooth titanium carbide saw blade, &
impact-resistant case.
Specifications
18 V DC
6,500 rpm
5/8"-11
Yes
10,000 rpm
6.25 lbs.
18V
Nano™ Li-Ion
Battery
266
18V XRP™ Li-Ion
6¾" Metal Cutting Circular Saw Kit
Specifications
DCG411KL 18V 4½" Cut-Off Tool Kit
Bare Tool Only
DC411B
Part No.
volt
• 4-position blade clamp allows for flush
cutting and increased versatility.
• Lever-action keyless blade clamp.
• Anti-slip comfort grip.
• Pivoting adjustable shoe with open top.
• Variable speed with trigger lock.
• KIT Includes (1) battery, 1 hr. charger,
reciprocating saw blade & hard case
Specifications
18
Li-ion
NiCd
Strut
18
volt
DCS385L
Compact
18V Nano™ Li-Ion
Battery
• Compatible with all
DeWalt 18V tools.
• No memory and virtually no self-discharge.
• Lightweight design, 1.5 lbs., the same
weight as DeWalt 12V NiCad batteries.
Part No.
DC9181
Hartford, CT
800-969-0285
Description
Compact 18V NANO™ Li-ion
Battery
Boston , MA
800-645-6155
7.2V - 18V NiCad/NiMH/
Li-Ion Charger
• Charges all DeWalt
7.2V - 18V Batteries
• 3-Stage Charging
System.
Part No.
DC9310
DC9180C
DC9319
Description
7.2V - 18V Battery Charger
18V Battery / 1 Hour Charger
Combo Kit
7.2V - 18V Vehicle Battery
Charger
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
KIT COMPONENTS
2-Tools
2-Tools
2-Tools
2-Tools
4-Tools
4-Tools
6-Tools
DCK
266L
DCK
265L
DCK
271L
DCK
275L
DCK
470L
DCK
475L
DCK
675L
DCD970 18V XRP™ Li-Ion
Fasteners
Combination Kits
Anchors
18V Li-Ion Cordless
1/2" Hammerdrill / Drill / Driver
DCD775 18V XRP™ Li-Ion
Strut
Compact 1/2" Hammerdrill / Drill / Driver
DCD760 18V XRP™ Li-Ion
Compact 1/2" Drill / Driver
Threaded
Rod
DCD827 18V XRP™ Li-Ion
1/4" Impact Driver
DCF826 18V XRP™ Li-Ion
1/2" Impact Driver
Pipe
Hangers
DC385 18V XRP™ Li-Ion
Reciprocating Saw
DC411 18V XRP™ Li-Ion
4-1/2" Cut-Off Tool
Tools
DW059 18V XRP™ Li-Ion
1/2" Impact Wrench
DC390 18V XRP™ Li-Ion
6-1/2" Circular Saw
Abrasives
DW919 18V
Flexible Floodlight
ACCESSORIES INCLUDED:
DC9180 18V XRP™ Li-Ion
OnSite
Supply
Batteries (2)
DC9181 18V XRP™ Li-Ion
Compact Batteries (2)
DC9310 7.2V - 18V 60-Minute
Safety
Li-Ion/NiCad/NiMH Charger
DC931 7.2V - 18V 30-Minute
Li-Ion/NiCad/NiMH Charger (Compact)
Tool Case (Hard-Sided)
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
267
Rentals
Contractor's Bag (Soft-Sided)
Fasteners
12V Li-ION Cordless
Replace Your Hand Tools with Li-Ion Power!
Anchors
Up To 65% Lighter vs. "compact" NiCad Batteries
NEW XC High Capacity
12V Lithium-Ion
Lightweight Design
• Only 0.4 lbs. and 50% smaller than
"compact" NiCad batteries.
• 2X the Run-Time vs. Original
M12 Battery
Strut
No Memory & Virtually No
Self-Discharge
Compact
• 2-1/2" W x 3-1/2" L
• Provides a durable
and stable base for
tools to stand upright.
• Longer run-time with fade-free power
Part No.
Description
Threaded
Rod
48-11-2401 12V M12 Replacement Battery
48-11-2402 12V M12 XC High Capacity
Replacement Battery
48-11-2402
Pipe
Hangers
Tools
2410-22
2450-22
12V Li-Ion 1/4" Hex
Impact Driver
12V Li-Ion 3/8" Drill Driver
Abrasives
• 2-Speed, all-metal gear box.
• Powerful motor, up to 25% more torque.
• Ratcheting single metal sleeve chuck for
better bit retention.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
OnSite
Supply
2410-22 Specifications
Volts:
12 V DC
No Load Speed (RPM): 0-400/0-1,500
Impacts per Minute:
0-3000 IPM
Torque:
250 in.-lbs.
Chuck Type:
3/8"
Tool Length
7-3/8"
Tool Weight (w/battery): 2.5 lbs.
Safety
Part No.
Description
2410-22
12V Cordless Li-Ion
3/8" Drill Driver Kit
3/8" Drill Driver,
Bare Tool Only
2410-20
Rentals
268
2451-22
• Quick Bit-Loading for bit insertion and
release with one hand.
• Battery Fuel Gauge displays remaining
run-time.
• Built-in LED for illumination.
• Variable Speed Trigger
• KIT Includes (2) Batteries, Charger and
impact-resistant Carrying Case.
2450-22 Specifications
Volts:
No Load Speed:
Impacts per Minute:
Torque:
Chuck Type:
Tool Length
Tool Weight (w/battery):
12 V DC
0-2000 RPM
0-3000 IPM
850 in.-lbs.
1/4", Hex
6-1/2"
2.3 lbs.
Part No.
Description
2450-22
12V Cordless Li-Ion 1/4"
Hex Impact Driver Kit
1/4" Hex Impact Driver,
Bare Tool Only
2450-20
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
12V Li-Ion 3/8" Square
Drive Impact Wrench w/Ring
• Powerful Impact Mechanism - Up to
1,000 in.-lbs. of torque.
• Easy socket insertion/release.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
2451-22 Specifications
Volts:
12 V DC
No Load Speed:
0-2,200 RPM
Impacts per Minute:
0-3000 IPM
Torque:
1000 in.-lbs.
Anvil Type:
3/8" Square
Tool Length
6-1/2"
Tool Weight (w/battery): 2.3 lbs.
Part No.
Description
2451-22
12V Cordless Li-Ion 3/8"
Square Drive Impact Wrench w/Ring Kit
2451-20
3/8" Square Drive Impact
Wrench w/Ring Bare Tool Only
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
12V Li-Ion
No-Hub Driver
Strut
With specific torque settings
for 60 and 80 in/lbs, the M12™
Cordless No-Hub Driver is
specifically designed to quickly
install no-hub couplings with
accuracy and repeatability. The
2455-22 can fasten up to 300
clamps on a single charge and
is proven to be accurate for
up to 25,000 clamps before
re-calibration.
2455-22
• Specific Torque Settings
for 60 and 80 in-lbs - Fast
accurate installation of no-hub couplings
• Auto Shut-Off w/ LED Indicator - Alerts users that torque limit
has been achieved
• LED Calibration Indicator - Alerts user when calibration is
needed (25,000 cycles)
• 0-750 RPM Drill Mode - for general drilling and fastening
• Fastens up to 300 steel clamps on a single charge
• Compact/Lightweight Design
• Built-in Fuel Gauge & LED for illumination.
• Quick Bit-Loading 1/4 in. Hex Chuck for one-handed operation
• Metal Gear Housing for job site durability
• Variable Speed Trigger for output power control
• Over-mold side and grip
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger, (3) Shockwave Sockets, &
Carrying Case.
• KIT Includes (2) Batteries, Charger, #2 Phillips ¼" Hex Insert Bit,
& Storage Bag.
Part No.
2455-22 12V Cordless Li-Ion No-Hub Driver
2455-20 Screwdriver, Bare Tool Only
12 V DC
0-500 RPM
150 in.-lbs.
1/4" Hex
14 + 1
Capacity in Steel:
1/4"
Capacity in Wood:
1/2"
Tool Length
7"
Tool Weight (w/battery): 2 lbs.
Tools
Description
Volts:
No Load Speed:
Torque:
Chuck Type:
Clutch Settings:
Description
2401-22 12V Cordless Li-Ion Screwdriver
2401-20 Screwdriver, Bare Tool Only
12V Li-Ion Copper Tubing Cutter
• Close quarter rotating cutting head cuts pipe in confined spaces.
• Automatic adjustment from 3/8" - 1" tubing.
• Auto locking mechanism, Ultra-efficient drive mechanism delivers over 200 cuts per charge.
• Water resistant metal cutter head.
• Ergonomic, compact, and lightweight design for operator comfort.
• Built-in Fuel Gauge & LED for illumination.
OnSite
Supply
• KIT Includes (2) Batteries, Charger & Carrying Case.
2471-21
2471-22 Specifications
Replacement Copper
Cutting Wheels
• Includes 2 replacement cutting
wheels for the M12 12V Copper Tubing Cutter.
Part No.
Description
48-38-0010 Replacement Copper Cutting Wheels, 2/pack
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Volts:
Trigger:
Speed:
Capacity:
Blade:
Tool Length
Tool Weight (w/battery):
12 V DC
Cut, Reset to open
500 RPM
1/2" - 1-1/8" O.D.
Copper Cutting
14"
3.2 lbs.
Part No.
Description
2471-22
2471-21
2471-20
M12 Copper Tubing Cutter Kit, 2 Batteries
M12 Copper Tubing Cutter Kit, 1 Battery Only
M12 Copper Tubing Cutter, Tool Only
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Abrasives
269
Safety
Part No.
2401-22 Specifications
12 V DC
0-250 / 0-750 RPM
60 in.-lbs. & 80 in-lbs.
1/4" Hex
2.75 lbs.
Rentals
Volts:
No Load Speed:
Torque:
Chuck Type:
Tool Weight (w/battery):
Pipe
Hangers
12V Li-Ion Screwdriver
Threaded
Rod
2401-22
2455-22 Specifications
Fasteners
12V Li-Ion cordless
Fasteners
12V Li-ION Cordless
Hackzall® Reciprocating Saw Blades
Anchors
Designed to maximize the cutting performance of the new M12
HACKZALL™ Reciprocating Saw, these blades feature a thin kerf
design that reduces the amount of drag and resistance while cutting,
resulting in more cuts per battery charge. Specialized blades are
available for a variety of HVAC, electrical, plumbing and maintenance/repair applications. Includes 5 blades (except where noted).
2420-22
Strut
Threaded
Rod
12V Li-Ion Hackzall™ Reciprocating Saw
• Keyless QUIK-LOK™ Blade Clamp allows for quick and easy
blade changes.
• All-metal gear case for added durability.
• Accepts both HACKZALL™ and SAWZALL® style blades.
• Built-in Fuel Gauge & LED for illumination.
• Variable Speed Trigger
Pipe
Hangers
• KIT Includes (2) HACKZALL™ Blades, (2) Batteries, Charger and
impact-resistant Carrying Case.
Part No.
Application
Tools
48-00-5400 Fiberglass
48-00-5460 Wood
48-00-5461 Plaster
48-00-5410 Multi-Material
48-00-5310 Wood - Scroll
48-00-5324 Metal - Scroll
48-00-5414 PVC - 4"
48-00-5614 PVC - 6"
48-00-5424 Duct
48-00-5418 EMT
2420-22 Specifications
Volts:
No Load Speed:
Stroke Length:
Blade Clamp:
Trigger:
Tool Length
Tool Weight (w/battery):
12 V DC
0-3000 RPM
1/2"
Quik-Lok™ Universal 1/2" Tang
Variable Speed
11"
2.6 lbs.
Part No.
Description
2420-22
2420-20
12V Cordless Li-Ion M12 Hackzall™ Recip Saw Kit
M12 Hackzall™ Recip Saw, Tool Only
Abrasives
12V Li-Ion 3/8" Right Angle Drill Driver
• 3/8'' Single sleeve Ratcheting Chuck
• 3-3/4'' Head Length
• Extended Paddle Switch
• Electronic Clutch - 11 Settings plus drill
mode for complete control
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes Battery, Charger, & Soft
Carrying Case.
OnSite
Supply
Specifications
Safety
Volts:
12 V DC
No Load Speed:
0-800 RPM
Torque:
100 in.-lbs.
Chuck Type:
3/8" Hex
Clutch Settings:
11 + 1
3-3/4"
Head:
Tool Length
11.75"
Tool Weight (w/battery): 2.43 lbs.
Part No.
Rentals
Description
2415-21 12V Li-Ion 3/8" Right Angel
Drill Driver Kit
2415-20 12V Li-Ion 3/8" Right Angel
Drill Driver, Bare Tool ONLY
270
Hartford, CT
800-969-0285
12V Li-Ion PVC
Shear
2415-21
• Powerful Mechanism - Cuts
up to 2" schedule 40 PVC in 3
seconds
2470-21
• Ultra Sharp Blade with Pierce
Point - No burrs or shavings to
remove
• Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall
• Quick Return Blade - Increased productivity during repetitive cuts
• Stainless Steel Blade and Aluminum Jaw - Impact, water and
rust resistant
• Variable Speed Trigger - Controlled cut in warm or cold weather
• KIT Includes Battery, Charger, & Carrying Case.
2470-21 Specifications
Volts:
Capacity:
Torque:
Trigger:
Part No.
12 V DC
Blade:
3mm S/S
2-3/8" O.D. Tool Length
14-3/8"
1,900 in.-lbs. Tool Weight (w/battery): 4.7 lbs.
Variable
Description
2470-21 12V Li-Ion PVC Shear Kit
2470-20 12V Li-Ion PVC Shear, Bare Tool ONLY
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Strut
Anchors
Rechargeable Test and Measurement Instruments
Fasteners
12V Li-Ion Cordless
2290-21
2310-22 Specifications
Volts:
12 V DC
LCD Display:
2.4" Hi-Res Color
Camera Head Dia.:
0.7" (17mm)
Image Zoom:
2X
LED Brightness Adjust: (3X) Control
Cable Length
3'
Part No.
2310-21
2300-20
Description
M-Spector™ Digital Camera Kit
M-Spector™ Digital Camera Kit
4-AA Batteries, (does not include 12V Battery or Charger)
2310 / 2300 Accessories
Part No.
Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0115 Replacement Camera Cable
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommended maximum extension is 19')
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
2311-21 Specifications
Volts:
12 V DC
LCD Display:
3.5" Hi-Res Color
Camera Head Dia.:
0.7" (17 mm)
Adj. Image Zoom:
4X
LED Brightness Adjust: (4X) Control
Cable Length
3'
Part No.
2311-21
2312-21
Description
M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
2311 Accessories
Part No.
Description
• Measures depth and location of rebar up
to 6” through concrete
• Detects location of wood, PEX, PVC, and
metal
• Differentiates between steel (ferrous) and
copper or aluminum (non-ferrous) metals
• Embedded AC voltage detection to identify the location of live wires
• Intuitive user interface displays stud
centers and edges
• High contrast white on black display and
backlight for easy reading
• Rugged over-molding improves durability
and user grip
• Auto-calibration for all surfaces
• KIT Includes Battery, Charger &
Carrying Case.
2290-21 Specifications
Volts:
12 V DC
Detection depths of various materials:
Wood/Metal Stud:
1-1/2 inches
Plastic:
3 inches
Ferrous Metal:
6"
Non-Ferrous Metal: 6"
Position Accuracy:
Wood:
1/4"
Non-Ferrous:
1/2"
Ferrous:
1/2"
Scan for AC Electrical: Yes
Display Resolution:
0.5"
Backlight:
Yes
Non-Contact Voltage: Yes
Indication:
Visual (for NCVD)
Part No.
2290-21
2290-20
Description
Detection Tool Kit
Detection Tool, Tool Only
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
271
Pipe
Hangers
FEATURES:
Tools
• KIT Includes 3' Camera Cable, Battery,
Charger and Carrying Case.
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for automotive applications.
Abrasives
• Crystal clear, 2.4" high-resolution, color
display.
• Exclusive image zoom (2X) and LED
brightness control.
• Durable, detachable, 3' water-tight flexible cable and a small camera head fits
through holes as small as 3/4".
• Extension camera cables available to
extend reach of camera.
• One-handed operation.
• 15 hour run-time.
• Also available in 4-AA battery configuration
or tool only.
OnSite
Supply
12V Li-Ion M-Spector™
Digital Inspection Cameras
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
Safety
2310-21
A heavy duty pistol grip detection tool
for professional, commercial and industrial applications. Detects rebar up to 6"
deep in concrete, as well as the location
and depth of materials beneath gypsum,
OSB, ceramic tile and marble. Four wheel
design for durability and smooth, accurate
measurement.
Rentals
2311-21
Threaded
Rod
12V Li-Ion SUB-SCANNER™
Detection Tool Kit
Fasteners
12V Li-ION Cordless
Rechargeable Test and Measurement Instruments
Anchors
12V Li-Ion
Clamp Meters
12V Li-Ion Thermometers
Strut
A True-RMS current tester for professional commercial and industrial
applications. The clamp meters feature
an ergonomic pistol grip design greatly
increasing comfort and ease-of-use
in overhead applications. The units
also provide wide 1.30 or 1.57" jaw
openings to easily handle very large
conductors, a thin jaw profile for access
to tight spaces, a large white on black
display, embedded non-contact voltage
detection, and embedded extra bright
LED floodlight.
Threaded
Rod
HVAC/R CLAMP-GUN™ Clamp Meter Kit 2238-21
• Large jaw size of 1.30" measuring up to 750 MCM cable
• CAT IV 600V / CAT III 1000V for greater safety
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(Dual Banana), Carrying Case and Manual
Pipe
Hangers
2238-21 Specifications
TRMS:
Safety Rating:
Current AC:
Microamps:
Part No.
YES
CAT IV 600V/
CAT III 1000V
600A
600µA
Voltage AC/DC:
Contact Temp:
Resistance:
LED Light:
1000V
-40° F to 1000°F
600 kOhms
YES
Tools
CLAMP-GUN Clamp Meter Kit 2239-21
™
• Extra-large jaw size of 1.57" measuring up to 1000 MCM cable
• In-rush current measurement for motor starts
• Extra bright LED flood light and built-in voltage detection
Abrasives
• KIT Includes Battery, Charger, Test Lead Set, Carrying Case,
and Manual
2239-21 Specifications
TRMS:
YES
Safety Rating: CAT IV 600V/
CAT III 1000V
In-Rush Current: 100mS
Part No.
Voltage AC/DC:
Contact Temp:
Resistance:
LED Light:
1000V
-40° F to 1022°F
600 kOhms
YES
OnSite
Supply
Safety
A self leveling mechanism that ensures an
accurate auto plumb up to 1/4" at 100 ft.,
and an out-of-level indicator blinks when the
leveling range exceeds four degrees.
FEATURES:
Rentals
272
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2277-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity:
Adj. .10
Basic Accuracy:
1.50%
Distance to Spot: 40:1
Contact Temperature: -40°F to 1022°F Data Storage:
20 points
• Self-Leveling • Out-of-Level Indicator
• Magnetic
• Low Battery Indicator
Hartford, CT
800-969-0285
Description
2277-21 12V Li-Ion HVAC/R LASER-TEMP GUN™ Kit
2277-20 12V Li-Ion HVAC/R LASER-TEMP GUN™, Bare Tool ONLY
LASER-TEMP GUN™ Kit 2276-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2276-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity:
0.10 to 1.0
Contact Temperature: -40°F to 1022°F Distance to Spot: 40:1
Basic Accuracy:
1.50%
Data Storage:
20 points
Description
2276-21 12V Li-Ion LASER-TEMP GUN™ Kit
2276-20 12V Li-Ion LASER-TEMP GUN™, Bare Tool ONLY
12V Li-Ion 2-Beam Plumb
Laser Kit
2320-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Measures ambient humidity and dew point
• Unit memory stores up to 20 temperature values
Part No.
Description
2239-21 12V Li-Ion Clamp Meter Kit
2239-20 12V Li-Ion Clamp Meter, Bare Tool ONLY
HVAC/R LASER-TEMP GUN™ Kit 2277-21
Part No.
Description
2238-21 12V Li-Ion HVAC/R Clamp Meter Kit
2238-20 12V Li-Ion HVAC/R Clamp Meter, Bare Tool ONLY
A heavy duty pistol grip infrared thermometer
for professional, commercial and industrial
applications. Powered by the Milwaukee M12
Lithium Ion battery, LASER-TEMP GUNs™ can
safely measure temperatures between -22 to
1472° F with a 40:1 distance to spot ratio for
even the most demanding industrial applications. Designed with embedded non-contact
voltage detection and an extra bright LED
Floodlight to increase end user productivity.
• KIT Includes Battery, Charger & Carrying Case
2320-21 Specifications
Volts:
Accuracy:
Leveling Range:
Laser Power:
Laser Wave Length:
Part No.
2320-21
2320-20
Boston , MA
800-645-6155
12V
1/4'' @ 100'
+- 4 Degrees
<1mW
635 nm
Description
Cordless 12V 2-Beam Plumb Laser Kit
Cordless 12V 2-Beam Plumb Laser, Tool Only
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
KIT COMPONENTS
2-Tools
2-Tools
2-Tools
2-Tools
2-Tools
4-Tools
4-Tools
2490-22
2239-23
2276-23
2290-23
2491-22
2490-24
2491-24
Fasteners
Combination Kits
Anchors
12V Li-Ion cordless
Strut
2401-20
M12 Screwdriver
2420-20
M12 HACKZALL®
Recip Saw
(Incl. G.P. HACKZALL® Blade)
Threaded
Rod
2471-20
M12 Copper
Tubing Cutter
2450-20
M12 1/4" Hex
Impact Driver
Pipe
Hangers
49-24-0145
M12 Work Light
2239-20
M12 CLAMP-GUN™
Clamp Meter
Tools
2276-20
M12 LASER TEMP-GUN™
Thermometer
2290-20
M12 SUB-SCANNER™
Detection Tool
Abrasives
ACCESSORIES INCLUDED:
(2) 48-11-2401
M12 Lithium-Ion
Batteries
OnSite
Supply
48-59-2401
M12 Battery
Charger
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
273
Rentals
Safety
Contractor Bag
Fasteners
12V Li-ION Cordless
Chargers
Anchors
Batteries
12V Li-Ion
Battery
Strut
For use with Milwaukee
M12™ Tools & Accessories.
FEATURES:
Threaded
Rod
• 1.4 amp hour battery
• Compact/Lightweight:
Over 65% lighter and
over 50% smaller vs.
"compact" NiCd Batteries
• Ergonomic- compact, and lightweight
design for operator comfort
• 2-year warranty
Part No.
12V Li-Ion Battery Charger
For Use with Milwaukee M12™ Tools and
Accessories. 30 minute charger.
Part No.
Job Site Radio
Description
48-59-2401 M12 12V 30-min Charger
FEATURES:
• 10 Station Presets
• Equalizer
• Digital Display
• Storage compartment for iPod or MP3
player.
• Powered by M12 Li-Ion battery, AAA
Alkaline batteries or AC cord.
Description
48-11-2401 M12 12V Battery
Pipe
Hangers
12V Li-Ion Wall and Vehicle
Battery Charger
Tools
A dually functional unit that has the capability to charge M12™ LITHIUM-ION batteries in a traditional wall outlet or vehicle
DC outlet. Now, whether the user is in a
work truck on the work site, one charger
can do the job. The 2510-20 model is covered by the Milwaukee 5-Year Warranty.
Part No.
Abrasives
2510-20
12V Li-Ion XC High
Capacity Battery
Description
M12 12V Wall & Vehicle
Charger
For use with most Milwaukee M12™ Tools
and Accessories.
2349-20
FEATURES:
OnSite
Supply
Description
Safety
48-11-2402 M12 12V XC High Capacity
Battery
12V Li-Ion Power Port
Portable charger capable of charging five
small electronic devices (two at a time) on
a single battery pack. Includes DC and USB
ports.
Does not include M12™ battery or charger
Part No.
Rentals
2349-20
274
• INCLUDES AC Cord, (2) AAA batteries
and Auxiliary Cord. (M12 battery & charger
NOT included)
Part No.
2590-20
Description
M12 Job Site Radio
12V Li-Ion Worklights
Provides hands-free light in a
compact and lightweight package. Both lights feature a 90°
rotating head, projecting light in
any direction. Integrated magnet provides hands-free use.
Worklight 49-24-0145
• Xenon incandescent bulb
LED Worklight
49-24-0146
• Increased power - 2X the run-time and
increased performance
• Compact - Only 2-1/2" by 3-1/2"
• Provides durable and stable base for
tools to stand upright.
• Rubber over-mold to provide shock
absorption and protect finished surfaces.
• 2-year warranty
Part No.
Smallest Job Site Radio with best in class
reception and sound. Only 11" x 6.5" x 4",
this weather-resistant radio features and
advanced digital tuner and is compatable
with iPod® and MP3 players.
Hartford, CT
800-969-0285
Description
• 90-degree pivoting aluminum
head – Impact and weather
resistant
• LED lights provide 2X
brighter light and runs twice as
long as incandescent bulbs
Lights do not include M12™ battery or
charger
Part No.
Description
49-24-0145 Cordless Xenon Worklight
49-24-0146 Cordless LED Worklight
M12™ Power Port
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Specifications
Description
• KIT Includes (2) batteries, fast charger,
bit tip, belt hook and contractor bag.
• KIT Includes (2) batteries, fast charger,
belt hook and contractor bag.
Specifications
Volts:
Max. Power:
Drive:
No-Load Speed:
Weight:
Part No.
Specifications
12 V DC
160 UWO
1/4"
0-1,050 RPM
2.2 lbs.
Description
Part No.
DCF610S2 12V 1/4" Sub-Compact
Screwdriver Kit
Description
DCF815S2 12V 3/8" Sub-Compact
Impact Wrench Kit
Philadelphia, PA
610-647-8070
Fasteners
Abrasives
• Compact, lightweight design fits into
tight areas.
• One-handed loading 1/4" hex chuck accepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased visibility without shadows.
• 3 Year Limited Warranty
Safety
Part No.
12 V DC
1/4"
0-2,450 RPM
0-3,400 IPM
950 in/lbs.
2.3lbs.
OnSite
Supply
12V MAX® Li-Ion
1/4" Sub-Compact
Impact Driver Kit
Specifications
Volts:
Drive:
No-Load RPM:
Impacts/Minute:
Max Torque:
Weight:
Description
DCD710S2 12V 3/8" Sub-Compact Drill/
Driver Kit
DCF813S2 12V 3/8" Sub-Compact
Impact Wrench Kit
Volts:
12 V DC
Max. Power:
189 UWO
# of Speed Settings: 2
Max RPM:
0-1,700
Clutch Settings:
15
Weight:
2.4 lbs.
Threaded
Rod
• Compact, lightweight design fits into
tight areas.
• Two speed transmission for optimal
speed and torque control.
• Belt hook included for portability.
• LED work light provides increased visibility in confined spaces.
• 3 Year Limited Warranty
t
Part No.
12 V DC
3/8"
0-2,450 RPM
0-3,400 IPM
1150 in/lbs.
2.3lbs.
• Compact, lightweight design fits into
tight areas.
• One-handed loading 1/4" hex chuck accepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased visibility without shadows.
• 3 Year Limited Warranty
-C
o
mp
ac
Volts:
Drive:
No-Load RPM:
Impacts/Minute:
Max Torque:
Weight:
12V MAX® Li-Ion
3/8" Sub-Compact Drill/Driver Kit
SUB
12V MAX® Li-Ion
1/4" Sub-Compact Screwdriver Kit
Tools
• KIT Includes (2) batteries, fast charger,
and contractor bag.
DCD710S2
• KIT Includes (2) batteries, fast charger,
bit tip, belt hook and contractor bag.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
DCF815S2
Hartford, CT
800-969-0285
275
Rentals
• Compact, lightweight design fits into
tight areas.
• 3/8" Hog ring anvil; Fast socket changing.
• 1150 in/lbs. of torque; Power for fastening, tightening and loosening.
• 3 LED work lights provides increased visibility without shadows.
• 3 Year Limited Warranty
DCF610S2
Pipe
Hangers
DCF813S2
12V MAX® Li-Ion
3/8" Sub-Compact
Impact Wrench Kit
Strut
-C
o
mp
ac
t
SUB
SUB
SUB
-C
o
mp
ac
t
-C
o
mp
ac
t
Anchors
12V Li-Ion cordless
SUB
Anchors
-C
o
mp
ac
t
Fasteners
12V Li-ION Cordless
DCK210S2
Strut
DCT414S1
12V MAX® Li-Ion 1/4" Sub-Compact
Screwdriver / Impact Driver Combo Kit
Threaded
Rod
Impact Driver and Screwdriver both feature:
• Compact, lightweight design fits into tight areas.
• One-handed loading 1/4" hex chuck accepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased visibility without shadows.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
Pipe
Hangers
• KIT Includes (2) batteries, fast charger, (2) Bit tips, (2) belt Hooks,
and contractor bag.
DCF 610S2 Screwdriver Specifications
Volts:
Max. Power:
Drive:
No-Load Speed:
Weight:
12 V DC
160 UWO
1/4"
0-1,050 RPM
2.2 lbs.
12V MAX® Li-Ion
Infrared Thermometer Kit
• Non-contact temperature measurements (-20° F to 932° F) for
ease of use over distance and accuracy.
• LED hot (red) and cold (blue) indicator for visual and/or audio
alarm for quickly locating trouble spots.
• Data storage for recording maximum, minimum and average
temperatures.
• Adjustable emissivity improves accuracy across a wide range of
materials.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
• KIT Includes battery, fast charger and kit box
Tools
Specifications
DCF815S2 Impact Driver Specifications
Abrasives
Volts:
Drive:
No-Load RPM:
Impacts/Minute:
Max Torque:
Weight:
Part No.
Volts:
Weight:
12 V DC
1/4"
0-2,450 RPM
0-3,400 IPM
950 in/lbs.
2.3lbs.
Part No.
12 V DC
4.8 lbs.
Description
DCT414S1 12V Infrared Thermometer Kit
Description
DCK210S2 12V 1/4" Sub-Compact Screwdriver / Impact Driver
Combo Kit
12V MAX®
Li-Ion Fast Charger
OnSite
Supply
Safety
• Charges all DeWalt® 12V
MAX® Li-Ion batteries.
• Charges the battery in
40 minutes or less, minimizing downtime.
• Diagnostics with LED
indicator communicates
battery charge status:
charged, charging,
power line problem,
replace pack and battery too hot or too cold.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
• Compact, lightweight design.
• Quick 40 minute charge time.
• No memory and virtually no self-discharge for maximum productivity and less downtime.
• Requires 12V MAX® compatible charger (DCB100)
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
Part No.
Part No.
Rentals
DCB100
276
Description
12V MAX® Li-Ion Battery Charger
Hartford, CT
800-969-0285
12V MAX® Li-Ion Battery Pack
DCB120
Boston , MA
800-645-6155
Description
12V MAX® Li-Ion Battery Pack
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
NiCad 24V 7/8" SDS Hammer Kit
DC223KA 24V 7/8" SDS Hammer Kit
Anchors
NiCd
24
Strut
Description
volt
24V NiCd Accessories
24V NiCad XR+™
Fan-Cooled Battery Pack
Part No.
Description
DW5401B25
DW5403B25
DW5404B25
5
DW5416B25
DW5417B25
DW5418B25
DW5421
¼
¼
¼
¼
DW5424B25
5
DW5427B25
3
DW5437B25
DW5438
DW5439
½ x 4 x 6 OAL
½ x 8 x 10 OAL
½ x 10 x 12 OAL
DW5446B25
5
DW5453
¾ x 6 x 8 OAL
Part No.
Description
DW0242 24V XR+ Fan-Cooled Battery Pack
⁄32 x 4½ x 6½ OAL
3
⁄16 x 4½ x 6½ OAL
3
⁄16 x 6½ x 8½ OAL
DW0246
2 x 4 OAL
2 x 4 OAL
6½ x 8½ OAL
12 x 14 OAL
Abrasives
x
x
x
x
24
volt
Tools
• Rock Carbide® tip for longer life.
• Four flute design for fast, efficient
drilling.
• Maximizes hammer energy for greater impact power.
NiCd
• FAN COOLED technology cools
down battery quickly thus extending battery life.
`• High capacity XR+™ Pack battery offers extended run time
without sacrificing number of
recharges
• Powers entire DEWALT® line of
24V tools
• Durable slide rail interface
keeps battery securely in place
even during the most extreme applications.
⁄16 x 4 x 6 OAL
⁄8 x 4 x 6 OAL
DW0249
24V Fan-Cooled Chargers
Be sure to visit
www.GoNefco.com
for the latest tools & products
from DeWalt
Washington D.C.
877-419-2755
NiCd
24
volt
⁄8 x 6 x 8 OAL
Philadelphia, PA
610-647-8070
Threaded
Rod
Part No.
24 V DC
0-1,100 RPM
0-4,100 BPM
8.4 lbs.
Pipe
Hangers
Volts:
No Load Speed:
Blows/Min:
Weight:
• FAN COOLED technology quickly cools batttery, thus extending
battery life.
• Charges all 24V batteries in 1 hr. or less, minimizing down time.
• 3-Stage charging system provides maximum run-time extending
overall life of the battery.
• Battery thermal protection system prevents charging batteries
that are too hot or too cold.
• Diagnostics with LED indicator communicate battery charge status.
• Durable slide rail interface keeps battery securely in place even
during the most extreme applications.
Part No.
Description
DW0246 24V Fan-Cooled Battery Charger
DW0249 24V Fan-Cooled Vehicle Battery Charger
Boston , MA
800-645-6155
OnSite
Supply
DC223KA
Safety
Specifications
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism for
fast penetration and low vibration.
• 360° side handle for better control and
ease of use in tight spaces.
• SHOCKS - Active Vibration Control signifcantly reduces vibration and increases user
comfort and productivity.
• Compact L-Shape Design allows access in
tight spaces while providing optimal balance for the user.
• 1.7 ft-lbs impact energy provides corded
power without the cord.
Hartford, CT
800-969-0285
277
Rentals
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Fasteners
24V NiCad cordless
Co
mp
ac
t
Anchors
Co
mp
ac
t
Fasteners
18V NiCAd Cordless
Strut
DC759KA
Threaded
Rod
XRP™ 18V NiCad
1/2" Drill/Driver Kit
Pipe
Hangers
• Patented 3-speed all-metal transmission
matches the tool to task for fastest application speed and improved run time.
• Heavy-duty 1/2" ratcheting chuck helps
prevent bits from slipping and falling out.
• LED Worklight provides increased visibility in confined spaces.
• High power, high efficiency motor delivers 450 unit watts out of max power for
superior performance in all drilling and
fastening applications.
• Best in class length improved balance and
better control.
• KIT Includes (2) batteries, 1 hour charger,
and kit box.
Volts:
18 V DC
Max. Power:
450 UWO
# of Speed Settings: 3
Max RPM: 0-500/0-1,250/0-2,000
Clutch Settings:
22
Weight:
6.25 lbs.
18V NiCad
1/2" Compact Drill/Driver Kit
• Compact size fits into the tightest conditions
• Lightweight design minimizes user fatigue
• High performance motor delivers maximum power of 380 unit watts out
• Dual speed range: 0-450/0-1,500 rpm
delivers optimal performance
• 1/2" single sleeve keyless ratcheting
chuck for tighter bit grip
• Maximum durability and reliability withstands jobsite conditions
• KIT Includes (2) batteries, 1 hour charger,
double-ended screwdriver bit & kit box.
Specifications
Volts:
Max. Power:
# of Speed Settings:
Max RPM:
Clutch Settings:
Weight:
Part No.
18 V DC
380 UWO
2
0-450/0-1,500
17
5.2 lbs.
Description
DC759KA 18V 1/2" Compact Drill/
Driver Kit
Description
18V NiCad
1/2" Compact Drill/Driver Kit
• Compact size: allows users to fit into
tight spaces.
• Lightweight design minimizes user fatigue
• 1/2'' ratcheting chuck reduces bit slippage.
• Dual speed range 0-500/0-1,700 rpm
delivers optimal performance
• High performance frameless motor delivers
maximum power of 410 unit watts out
• LED work light provides increased visibility in confined spaces
• KIT Includes (2) batteries, 1 hour charger,
and kit box.
Specifications
Volts:
18 V DC
Max. Power:
410 UWO
# of Speed Settings: 2
Max RPM:
0-500/0-1,700
Clutch Settings:
17
Weight:
4.8 lbs.
Part No.
Description
DC720KA 18V 1/2" Compact Drill/
Driver Kit
NiCd 18V 1/2" Compact Hammerdrill Kit
Safety
t
OnSite
Supply
DC725KA
mp
ac
Abrasives
Part No.
volt
DCD940KX 18V XRP 1/2" Drill/Driver Kit
Co
Tools
Specifications
18
volt
NiCd
18
DCD940KX
NiCd
NiCd
18
volt
DC720KA
Specifications
Volts:
18 V DC
Max. Power:
410 UWO
# of Speed Settings: 2
Max RPM:
0-500/0-1,700
MAX BPM:
0-8,500/0-29,000
Clutch Settings:
17
Weight:
4.9 lbs.
Part No.
Description
DC725KA 18V 1/2" Compact
Hammerdrill Kit
• KIT Includes (2) batteries, 1 hour charger,
screwdriver bit & kit box.
Rentals
NiCd
18
• Compact size: allows users to fit into
tight spaces
• Lightweight design minimizes user fatigue
• 1/2'' single sleeve ratcheting chuck reduces bit slippage
• Dual speed range 0-500/0-1,700 rpm
0-8,500/0-29,000 bpm delivers optimal
performance
• High performance frameless motor delivers maximum power of 410 unit watts out
• LED work light provides increased visibility
in confined spaces
volt
278
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
volt
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
• Patented 3-speed all-metal transmission
matches the tool to task application for
fastest application speed
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength
• High power, high efficiency motor delivers 420 unit watts out of max power for
superior performance in all drilling and
fastening applications
• High torque motor delivers 500 in-lbs of
maximum torque
• 3-speed transmission features a max 3rd
speed at 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills
faster holes in masonry applications
• 1/2" Metal ratcheting chuck with carbide
jaws prevents bits from slipping
• Superior ergonomics provides optimal
balance, comfort and control
• 3-speed all-metal transmission
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation
• LED worklight provides increased visibility
in confined spaces
• High power, high efficiency motor delivers
450 unit watts out of max power
• Best in class length for improved balance
and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Specifications
Volts:
18 V DC
Max. Power:
420 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450/
0-2,000
Max BPM:
0-7,650/0-24,650/
0-34,000
Clutch Settings:
22
Weight:
6.0 lbs.
Part No.
Volts:
18 V DC
Max. Power:
420 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450/
0-2,000
Max BPM:
0-7,650/0-24,650/
0-34,000
Clutch Settings:
22
Weight:
5.95 lbs.
Part No.
Description
DCD959KX 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DCD959VX Same with Vehicle Charger
DC988KA
DC988VA
Description
18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
Same, with Vehicle Charger
Specifications
Volts:
18 V DC
Max. Power:
450 UWO
# of Speed Settings: 3
Max RPM:
0-500/0-1,250/
0-2,000
Max BPM:
0-8,500/0-21,250/
0-34,000
Clutch Settings:
22
Weight:
6.25 lbs.
Part No.
Fasteners
Description
DCD950KX 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DCD950VX Same, with Vehicle Charger
DCD950B Bare Tool Only
XRP™ 18V NiCad 1/2" Hammerdrill/Drill/Driver Kit
Abrasives
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Threaded
Rod
18
DCD950KX
volt
NiCd
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
NiCd
18
DC988KA
Pipe
Hangers
volt
Tools
NiCd
18
DCD959KX
Strut
Anchors
18V NiCaD Cordless
DC989VA
18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
18V XRP 1/2" Hammerdrill/
Drill/Driver Kit, with Vehicle
Charger
Philadelphia, PA
610-647-8070
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Safety
DC989KA
Description
18
volt
DC989KA
Hartford, CT
800-969-0285
279
Rentals
Part No.
• High torque motor delivers 500 in-lbs of
maximum torque
• Patented 3-speed transmission features a
maximum 3rd speed At 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills
faster holes in masonry applications
• 1/2" metal ratcheting chuck with carbide
jaws helps to prevent bits from slipping
• Superior ergonomics provides optimal
balance, comfort and control
NiCd
Volts:
18 V DC
Max. Power:
420 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450/
0-2,000
Max BPM:
0-7,650/0-24,650/
0-34,000
Clutch Settings:
22
Weight:
5.95 lbs.
OnSite
Supply
Specifications
Fasteners
18V NiCad Cordless
Anchors
DC820KA
DC825KA
18
volt
volt
Strut
Threaded
Rod
Pipe
Hangers
XRP™ 18V NiCad
1/4" Impact Driver
XRP™ NiCad
18V 1/2" Impact Wrench
• Compact size & weight allows
access into tighter areas and
reduces user fatigue.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• Compact size & weight allows
access into tighter areas and
reduces user fatigue.
• Textured anti-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
• Preferred rocker switch design for fast, easy fastening.
• Comfort grip provides maximum comfort
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy-duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Specifications
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Specifications
Tools
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
Part No.
DC825KA
DC825KB
18 V DC
¼" Hex shank
quick release
0-2,400 rpm
0-2,700 bpm
111 ft.-lbs.
4.6 lbs.
Description
Part No.
18V XRP 1/2"
Impact Driver
Kit
Bare Tool, ONLY
DC820KA
DC820KB
Description
18V XRP 1/2"
Impact Wrench
Kit
Bare Tool, ONLY
XRP™ NiCad
18V 1/2" High Torque
Impact Wrench
XRP™ NiCad
18V 1/2" High Torque
Impact Wrench
Specifications
Volts:
18 V DC
Drive Size:
½" square
w/detent pin
No Load Speed: 0-2,400 rpm
Impacts/min:
2,700 bpm
Max Torque:
145 ft.-lbs.
Weight:
4.6 lbs.
NiCd
volt
NiCd
18
NiCd
18
NiCd
18
volt
DC821KA
DW059K-2
Volts:
18 V DC
Drive Size:
½" square
w/detent pin
No Load Speed: 1,650 rpm
Impacts/min:
2,600 bpm
Max Torque:
3,600 in-lbs.
300 ft.-lbs.
Weight:
7.55 lbs.
Part No.
Description
Abrasives
DW059K-2 18V XRP 1/2"
High Torque
Impact Wrench
Bare Tool, ONLY
DW059B
• Durable all-metal gear case
and transmission
• Variable speed trigger and
electric brake
• Textured anti-slip comfort grip
• Heavy-duty impact mechanism delivers torque to
fastener without kickback
• Works with all 18V DEWALT®
batteries (XRP™, NANO™ and
Compact)
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Specifications
Volts:
18 V DC
Drive Size:
½" square
w/detent pin
No Load Speed: 2,100 rpm
Impacts/min:
3,000 bpm
Max Torque:
1,920 in-lbs.
160 ft.-lbs.
Weight:
5.3 lbs.
Part No.
DC821KA
Description
18V XRP 1/2"
High Torque
Impact Wrench
XRP™ NiCad 18V 3/8" Impact Wrench Kit
OnSite
Supply
DC823KA
NiCd
Safety
18
volt
Rentals
280
• Frameless motor for extended tool durability
and life
• Compact size and weight allow access into
tighter areas and reduces user fatigue
• 1,500 in-lbs of torque to perform a wide
range of fastening applications
• 0-2,400 rpm/0-2,700 ipm for faster application speed
• Replaceable brushes for increased serviceability
• Textured anti-slip comfort grip provides maximum comfort
• Durable magnesium gear case and all metal
transmission for extended durability
• Heavy-duty impacting mechanism directs
torque to fastener without kickback
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts:
18 V DC
Drive Size:
3/8" square
w/hog ring retention pin
No Load Speed: 0-2,400 rpm
Impacts/min:
2,700 bpm
Max Torque:
125 ft.-lbs.
Weight:
4.6 lbs.
Part No.
DC823KA
DC823B
Description
18V XRP 3/8" Impact Wrench Kit
Bare Tool, ONLY
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
XRP™ NiCad 18V 7/8" SDS Hammer Kit
• Variable speed, reversing switch delivers versatility in all applications.
• Factory-set clutch reduces sudden, high torque reactions if bit jams.
• Electro-pneumatic hammer mechanism for fast penetration and low vibration.
• 360° side handle for better control and ease of use in tight spaces.
• SHOCKS - Active Vibration Control significantly reduces vibration
• Compact L-Shape Design allows access in tight spaces while providing optimal balance
• 1.7 ft-lbs impact energy provides corded power without the cord.
Anchors
DC212KA
Fasteners
18V NiCaD cordless
• KIT Includes (2) batteries, 1 hour charger, 360° side handle, depth rod & kit box.
Specifications
Volts:
No Load Speed:
Blows/Min:
Weight:
18 V DC
0-1,100 RPM
0-4,100 BPM
7.6 lbs.
18
NiCd
DC212KA 18V 7/8" SDS Hammer Kit
DC212B Bare Tool, ONLY
Strut
Description
volt
XRP™ NiCad 18V 4½" Cut-Off Tool Kit
Pipe
Hangers
• 6,500 rpm provides high power for cutting and grinding applications
• Convenient trigger switch with lock-off button for easier gripping
• 2 Position side handle offers greater comfort and control
• Quick-change wheel release provides easier and quicker wheel removal without the
need for a wrench
• Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter
transmission while allowing access to tight space
• KIT Includes (2) batteries, 1 hour charger, Type 27 & Type 1 guards, 2 matched flanges,
wrench, Type 27 wheel, 2-position side handle & contractors bag.
18V Cordless 4½" Cut-Off
Tool Kit
Bare Tool ONLY
DW411B
Specifications
Volts:
No Load Speed:
Spindle Thread:
Spindle Lock:
Min. Wheel RPM:
Weight:
18 V DC
6,500 rpm
5/8"-11
Yes
10,000 rpm
7.0 lbs.
18
DW411KA
volt
Tools
Description
DW411KA
NiCd
Part No.
Threaded
Rod
Part No.
18 V DC
0-3,000 spm
11 ⁄ 8"
Yes
8.2 lbs.
Part No. Description
DC385K 18V XRP Reciprocating Saw Kit
• KIT Includes (1) battery, 1 hr. charger,
reciprocating saw blade & hard case.
18
DC385K
volt
XRP™ NiCad 18V 18 Ga. Swivel Head & Shear Kit
Volts:
18 V DC
Strikes/Min:
0-2,300 spm
Min. Cut Radius: 5.5"
Cap. in Steel: 18-28 ga.
Weight:
6.1 lbs.
• KIT Includes (2) batteries, 1 hour charger,
Blade Wrench & impact-resistant case.
Description
DC490KA
18V Cordless Swivelhead
& Shear Kit
Washington D.C.
877-419-2755
NiCd
18
Part No.
Philadelphia, PA
610-647-8070
• Head swivels 360° which allows user to access tight quarters while maintaining comfort.
• Cuts 7/32" strip which continuously curls
out of the cutting area.
volt
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Specifications
OnSite
Supply
Volts:
Strokes/minr:
Stroke length:
Electric Brake:
Weight:
NiCd
• 4-position blade clamp allows for flush
cutting and increased versatility.
• Lever-action keyless blade clamp.
• Anti-slip comfort grip.
• Pivoting adjustable shoe with open top.
• Variable speed with trigger lock.
DC490KA
281
Rentals
Specifications
Abrasives
XRP™ NiCd 18V Reciprocating Saw Kit
Fasteners
18V NiCad Cordless
DW934K-2
Anchors
DC668KA
NiCd
18
volt
Strut
XRP NiCad 18V
6½" Circular Saw
Threaded
Rod
• 3,700 RPM for fast rip cuts & cross cuts.
• 6½" carbide tipped blade for 2X cutting
capacity at 90° and 45°.
• High strength magnesium shoe and upper guard provides increased durability.
• 0-50° bevel capacity.
• Fan-cooled motor with replaceable brushes.
• XRP™ extended run-time battery provides long run-time & battery life.
• KIT Includes (1) battery, 1 hour charger,
16 tooth-carbide saw blade, rip fence,
blade wrench & impact-resistant case.
Pipe
Hangers
Specifications
Volts:
18 V DC
No Load Speed: 3,700 rpm
Blade Diameter: 6½"
Bevel Capacity: 0-50°
Arbor Size:
5 ⁄ 8"
Depth of Cut:
15 ⁄ 8" @ 45° / 2¼" @ 90°
Weight:
8.7 lbs.
Tools
Part No.
Description
DC390K
18V XRP 6½" Circular Saw Kit
• 6¾" 40-tooth carbide tipped blade cuts
up to 2" conduit and pipe in one pass.
• All metal upper and lower guards for
maximum durability.
• Multi-Coated SIGHT-LINE™ Window for
maximum abrasion resistance.
• Stainless-steel shoe stays rust free while
minimizing chip build-up which prevents
marring of the cutting surface.
• ULTRA SIGHT-LINE™ Scope allows maximum visibility to the cut line.
• KIT Includes (2) batteries, 1 hour charger,
40 tooth titanium carbide saw blade, &
impact-resistant case.
Specifications
Volts:
18 V DC
No Load Speed: 3,200 rpm
Blade Diameter: 6¾"
Bevel Capacity: N/A
Arbor Size:
20mm
Depth of Cut:
2 3 ⁄ 8" @ 90°
Weight:
9.5 lbs.
Part No.
• 11 ⁄ 8" diameter x 4' long flexible
shaft provides easy use and long reach.
• 14,000 VPM (under load) delivers maximum consolidation efficiency.
• KIT Includes (2) batteries, 1 hour charger, soft-side bag for batteries & charger.
Description
18V XRP Cordless Pencil Vibrator Kit
NiCd
OnSite
Supply
Part No.
DC530KA
XRP™ NiCad 18V Cut-Out Tool
• Tool-free bit change for fast and easy bit changing
• 26,000 rpm motor provides more cutting power
• Dust sealed switch provides durability and long switch life
Safety
Rentals
Volts:
Drive Size:
No Load Speed:
Max Torque:
Capacity (CRS):
Weight:
18 V DC
¼" Hex in
0-9,000/0-2,700 rpm
180 ft.-lbs.
12-28 gauge
5.4 lbs.
Part No.
Description
DC668KA
18V XRP Cordless Light
Gauge Steel Framing
Screwdriver Kit
DC520KA
18
volt
XRP™ NiCad 18V
Drywall/Deck Screwdriver Kit
• Dual speed ranges; high speed for drywall, low speed for decking.
• Depth sensitive "set and forget" nosepiece for consistent fastener depth.
• High-performance motor with fan cooling
delivers maximum power and durability.
• KIT Includes (2) batteries, 1 hour charger,
Bit tip/magnetic holder, drywall nosepiece,
TEKS® nosepiece & impact-resistant case.
Specifications
Part No.
Description
DC550KA
18V XRP Cut-Out Tool Kit
Part No.
Description
DC520KA
18V XRP Cordless Drywall/
Deck Screwdriver Kit
• KIT Includes (2) batteries, 1 hour charger, (1) general purpose bit, (1)
drywall cutting bit, ¼" & 1 ⁄ 8" collets & impact-resistant case.
282
Specifications
NiCd
Abrasives
DC530KA
18
• VERSA-CLUTCH® torque adjustment system to "dial" the proper torque needed.
• 0-900/0-2,700 rpm for better fastener
control in various material thickness.
• Tool designed for steel fastening applications that is ideal for use in 12-28 ga.
• KIT Includes (2) batteries, 1 hour charger,
#2 Phillips screwdriver bit, 5 ⁄ 16" nut runner
& impact-resistant case.
Description
XRP™ NiCad 18V Pencil
Vibrator Kit
volt
volt
XRP™ NiCad 18V Light
Gauge Steel Framing Screwdriver Kit
DW934K-2 18V 6¾" Metal Cutting
Circular Saw Kit
NiCd
18
volt
XRP™ NiCad 18V
6¾" Metal Cutting Circular Saw
™
18
DC390K
NiCd
NiCd
18
volt
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Volts:
Drive Size:
No Load Speed:
Max Torque:
Capacity (CRS):
Weight:
Washington D.C.
877-419-2755
18 V DC
¼" Hex in
0-9,000/0-2,900 rpm
180 ft.-lbs.
12 gauge
12.3 lbs.
Philadelphia, PA
610-647-8070
KIT COMPONENTS
2-Tools
2-Tools
2-Tools
4-Tools
4-Tools
5-Tools
6-Tools
6-Tools
9-Tools
9-Tools
DCK
255X
DCK
251X
DCK
250X
DCK
450X
DCK
455X
DCK
550X
DCK
650X
DCK
655X
DCK
950X
DCK
955X
(2)
Bags
(2)
Bags
Fasteners
Combination Kits
Anchors
18V NiCaD Cordless
DCD950 18V
1/2" Hammerdrill
Drill Driver
Strut
(Includes 360° Side Handle)
DW960 18V
Right Angle Drill
Threaded
Rod
DC385
18V Recip
Saw
DC390 18V
6-1/2" Circular Saw
(Includes 6-1/2" Blade)
Pipe
Hangers
DC330 18V
Jig Saw
DC825 18V
1/4" Hex
Impact Driver
Tools
DW059 18V
1/2" High Torque
Impact Wrench
DC411
4-1/2" Cut-Off Tool
(Includes Guards, Backing
Flange, Wrench & Type 1 Wheel)
Abrasives
DC550 18V
Cut-Out Tool
DW919
Flexible Floodlight
ACCESSORIES INCLUDED:
OnSite
Supply
(2) DC9096
18V Li-Ion
Batteries
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
283
Rentals
Contractor Bag
Safety
DC9310
1-Hour Charger
Fasteners
18V NiCad Cordless
18V NiCad Accessories
• Flex neck design with
lockable head clips allow
for hands free use and
versatility to stand or
hang light.
• Wide angle beam of light
provides more light than
a conventional flashlight.
• Xenon bulb provides extra bright beam of light.
• Battery/Charger not
included.
NiCd
Anchors
18
18V Flexible
Floodlight
volt
Strut
18V NiCd XRP™ Battery Pack
Threaded
Rod
• High capacity XRP™ battery has 40% more
run-time than standard batteries.
• Powers entire DeWalt line of 18V tools
allowing users to run multiple tools off of
the same battery pack.
Part No.
DC9096
Description
18V XRP Battery Pack
Worksite Radio Charger
• Charges 7.2V to 18V NiCad battieries.
• AM/FM Digital tuner with LCd display,
built-in clock, and 8 station memory
presets.
• Runs off 7.2V to 18V batteries and 120V
AC/DC.
• Auxiliary port allows connection to
CD players, MP3 players, iPods, and
portable satellite receivers with an audio
cable. (Cable not included).
Pipe
Hangers
Part No.
DC9310
DW9117
Volts:
Bulb:
Run-Time:
Weight:
18 V DC
Xenon
3 hours
0.5 lbs.
Part No.
DW919
Description
18V Flexible Floodlight
18V Pivoting
Head Flashlight
Description
Worksite Radio Charger
• Wide angle beam
• Head rotates 90°
• Xenon bulb provides
extra bright beam of
light
• Lightweight, compact
design
• Battery/Charger not
included
NiCd
18
DC011
Specifications
volt
Tools
Specifications
DW9109
DC9216
Abrasives
18V ½ Gallon Wet/Dry
Portable Vac
18V NiCd Chargers
• Charges DEWALT 7.2V - 18V NiCd and
NiMH batteries.
• 3-Stage Charging System, Thermal
Protection and LED Diagnostic indicators
provides maximum run-time and extends
overall life of the battery.
®
Part No.
OnSite
Supply
DC9310
DW9216
DW9117
DW9109
Description
18V Charger
18V Dual-Port Charger
18V 15 min. Charger
18V Charger Vehicle Charger
• 1/2 gallon tank with heavy-duty latch is
easy to empty and clean
• Gore™ HEPA wet/dry filter traps 99.97%
of dust at 0.3 microns
• Washable filter, rinse to clean. Tank is
easy to empty and clean
• Heavy-duty rubber hose
• Includes (1) XRP™ battery (NICd), 1 hour
charger.
Volts:
Bulb:
Run-Time:
Weight:
18 V DC
Xenon
3 hours
0.5 lbs.
Part No.
DW908
Description
18V Flashlight
18V Fluorescent
Area Light
Safety
• Built-in telescoping hook
allows hanging from 2"
materials.
• Over-molded lens for
increased durability
• 13W fluorescent bulb
• Lightweight, compact
design
• Battery/Charger not
included
Specifications
Tank Size
Voltage
Hose Diameter
Weight
Hose Length
Part No.
DC515K
1/2 gal
18 V DC
1-1/4"
6.0 lbs
2.5 feet
Description
18V 1/2 gal. Portable Wet/
Dry Vac
Part No.
Rentals
284
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Description
DC515 18V
Fluorescent Area Light
Philadelphia, PA
610-647-8070
DC936KA
DC728KA
NiCd
DC930KX
14.4
Anchors
DC935KA
Fasteners
14.4 NiCaD Cordless
volt
Part No.
Description
DC935KA 14.4V 1/2" Hammerdrill/Drill/
Driver Kit
DC936KA 14.4V 1/2" Hammerdrill/Drill
Driver Kit
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts:
14.4 V DC
Max. Power:
270 UWO
# of Speed Settings: 3
Max RPM:
0-400/0-1,400
Clutch Settings:
17
Weight:
4.7 lbs.
Description
DC728KA 14.4V 1/2" Compact Drill/
Driver Kit
14.4V
Replacement Battery
Description
• Powers entire line of
DeWalt 14.4V tools.
Part No.
Description
DC9091
14.4V Battery
14.4V NiCad 3/8" Right Angle Drill/Driver Kit
Specifications
Volts:
14.4 V DC
Max. Power:
210 UWO
# of Speed Settings: 2
Max RPM:
0-400/0-1,250
Chuck Type:
Plastic, 2-Sleeve
Weight:
4.4 lbs.
Part No.
Description
DW966K-2
• 2 speed ranges 0-450/0-1,250 rpm for increased user flexibility providing a wide range
of applications.
• 210 unit watts out of maximum power for
heavy-duty applications.
• Multi-grip trigger provides comfort and convenience by allowing the user to get into tighter
spaces while still having access to the trigger.
• Variable speed and reversing gives the user the
ability to control speed.
• Durable, right angle transmission with sealed
ball bearing for a longer tool life.
NiCd
DW966K-2 14.4V 3/8" Right Angle Drill/Driver Kit
Strut
Specifications
DC930KX 14.4V 1/2" Drill//Driver Kit
• KIT Includes (2) batteries, 1 hour charger & impactresistant case.
Threaded
Rod
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Part No.
Volts:
14.4 V DC
Max. Power:
335 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450/0-1,800
Clutch Settings:
22
Weight:
5.3 lbs.
Part No.
• Compact size: fits into the tightest conditions.
• Lightweight design minimizes user fatigue.
• 1/2" single sleeve keyless ratcheting
chuck for tighter bit grip.
• Maximum durability and reliability withstands jobsite conditions.
Pipe
Hangers
• DeWalt built high power, high efficiency
motor delivers maximum performance in
all drilling and fastening applications.
• XRP™ extended run-time batteries provide long run-time & battery life.
• Patented 3-speed all-metal transmission
matches the speed to the application for
optimal performance.
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping torque.
• Superior ergonomics optimize balance,
size and weight.
Tools
Volts:
14.4 V DC
Max. Power:
335 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450/0-1,800
Max BPM: 0-7,650/0-24,650/0-30,600
Clutch Settings:
22
Weight:
5.4 lbs.
14.4V NiCad
1/2" Compact Drill/Driver Kit
14.4V NiCad
1/2" Drill/Driver Kit
Abrasives
volt
volt
OnSite
Supply
Specifications
14.4
Safety
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
NiCd
• DeWalt built high power, high efficiency
motor delivers maximum performance in
all drilling and fastening applications.
• XRP™ extended run-time batteries provide long run-time & battery life.
• Patented 3-speed all-metal transmission
matches the speed to the application for
optimal performance.
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping torque.
• Superior ergonomics optimize balance,
size and weight.
14.4
NiCd
14.4V NiCad
1/2" Hammerdrill/Drill/Driver Kits
14.4
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
285
Rentals
volt
Fasteners
Fasteners
14.4V NiCad Cordless
NiCd
Anchors
Anchors
14.4
volt
14.4V NiCad
Reciprocating Saw
DC835KA
DC830KA
NiCd
NiCd
Strut
Strut
14.4
14.4
volt
volt
Threaded
Threaded
Rod
Pipe
Hangers
Hangers
14.4V NiCad 1/4" Hex
Shank Impact Wrench Kit
• Compact size & weight allows access into
tighter areas and reduces user fatigue.
• 1,550 in-lbs of max torque to perform a
wide range of fastening applications.
• 0-2,400 rpm/0-3,000 bpm for faster application speed.
• Textured ant-slip comfort grip provides
maximum comfort.
• Durable magnesium gear case and all
metal transmission for extended durability.
• Heavy duty impacting mechanism directs
torque to fastener without kickback.
• Compact size & weight allows access into
tighter areas and reduces user fatigue.
• 1,550 in-lbs of max torque to perform a
wide range of fastening applications.
• 0-2,400 rpm/0-3,000 bpm for faster application speed.
• Textured ant-slip comfort grip provides
maximum comfort.
• Durable magnesium gear case and all
metal transmission for extended durability.
• Heavy duty impacting mechanism directs
torque to fastener without kickback.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
• KIT Includes (2) batteries, 1 hou.r charger,
& impact-resistant case.
Specifications
Specifications
Tools
Tools
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
14.4 V DC
1/2" Square Drive
0-2,400 rpm
0-2,700 ipm
135 ft.-lbs.
3.9 lbs.
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
Part No.
Description
DC830KA
14.4V 1/2" Cordless
Impact Driver Kit
DC835KA
14.4V 1/4" Cordless
Impact Driver Kit
Abrasives
Abrasives
Description
OnSite
OnSite
Supply
Supply
NiCd
Safety
Safety
14.4
volt
Rentals
rentals
286
DW941K
14.4 V DC
0-2,300 spm
5.5"
18-28 ga.
5.8 lbs.
Part No.
Description
DW941K
14.4V Swivel Head Shear
Kit
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
14.4 V DC
0-2,700 spm
7/8" rpm
6.0 lbs.
Part No.
Description
DW937K
14.4V Reciprocating Saw Kit
14.4
volt
• KIT Includes (2) bateries, 1 hour charger, (1) general purpose bit, (1) drywall
cutting bit, ¼" & 1 ⁄ 8" collets & impactresistant case.
• KIT Includes (2) batteries, 1 hour charger,
blade wrench & impact-resistant case.
Volts:
Strokes/Min:
Min. Cutting Radius:
Capacity in steel:
Weight:
Volts:
Strokes/Min:
Stroke Length:
Weight:
• Tool-free bit change
for fast and easy bit
changing without a
wrench
• 26,000 rpm motor
provides more cutting
power
• Dust sealed switch
provides durability
and long switch life
• Head swivels 360º, allows user to access
tight quarters while maintaining comfort
• Cuts 7/32" strip which continuously curls
out of the cutting area providing consistent and accurate cuts
Specifications
14.4V
NiCad Cut-Out
Tool
14.4V NiCad Swivel Head Shear
Specifications
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
DC551KA
14.4 V DC
1/2" Square Drive
0-2,400 rpm
0-2,700 ipm
103 ft.-lbs.
3.9 lbs.
Part No.
• Keyless blade change allows quick blade
change without touching blade or reciprocating shaft.
• Electric brake reduces coast time.
• Compact and lightweight
• Pivoting shoe with open top for maximum
visibility.
• Blade reverses for upside down cutting
• Variable speed with trigger lock for more
precise cutting.
NiCd
14.4V NiCad 1/2" Square
Drive Impact Wrench Kit
DW937K
Specifications
Volts:
14.4 V DC
No Load Speed: 26,000 rpm
Collet Dia.:
1/4", 1/8"
Adjustable Guide: Yes
Weight:
4.5 lbs.
Part No.
Description
DC551KA
14.4V Cut-Out Tool Kit
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
DC840KA
12
NiCd
DC841KA
Co
mp
ac
t
DC940KX
Fasteners
Anchors
12V NiCad cordless
volt
Specifications
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
Specifications
12 V DC
1/2" Sq.
Drive
0-2,400 rpm
0-2,700 ipm
120 ft.-lbs.
3.6 lbs.
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
12 V DC
3/8" Sq.
Drive
0-2,400 rpm
0-2,700 ipm
105 ft.-lbs.
3.65 lbs.
Part No.
Description
Part No.
Description
DC840KA
12V 1/2" Impact
Wrench Kit
DC841KA
12V 3/8" Impact
Wrench Kit
12V NiCad
1/4" Hex Shank Impact
Driver Kit
Volts:
12 V DC
Max. Power:
285 UWO
# of Speed Settings: 3
Max RPM:
0-450/0-1,450
0-1,800 RPM
Clutch Settings: 22
Weight:
5. lbs
Part No.
Description
DC940KX
12V Drill/Driver
Kit
DW965K-2
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
DC845KA
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Part No.
Description
DC845KA
12V 1/4" Hex
Impact Driver Kit
Philadelphia, PA
610-647-8070
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
Washington D.C.
877-419-2755
12 V DC
1/4" Hex
Drive
0-2,400 rpm
0-2,700 ipm
96 ft.-lbs.
3.6 lbs.
12
NiCd
volt
Drill Kit
• KIT Includes (2) batteries, 1
hour charger, double-ended
& impact-resistant case.
Specifications
Volts:
12 V DC
Max. Power:
230 UWO
# of Speed Settings: 2
Max RPM:
0-450/0-1,450
Clutch Settings: 17
Weight:
3.9. lbs
Part No.
Description
DC727KA
12V Compact
Drill/Driver Kit
12V NiCad 3/8" Right Angle
• Multi-grip trigger provides comfort and convenience allowing the user to get into tight spaces
• Variable speed and reversing gives the user
the ability to control speed
• Durable, right angle transmission with sealed
ball bearing provides a longer tool life
Specifications
Specifications
NiCd
12
volt
Boston , MA
800-645-6155
Volts:
12 V DC
Max. Power:
186 UWO
# of Speed Settings: 2
Max RPM:
0-400/0-1,200
Weight:
4.1 lbs
Part No.
Description
DW965K-2 12V Right-Angle Drill Kit
Hartford, CT
800-969-0285
Strut
Threaded
Rod
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Specifications
Pipe
Hangers
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Tools
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
Abrasives
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• Compact Size: fits into the
tightest conditions.
• 3/8"single sleeve keyless
ratcheting chuck for tighter
bit grip.
• Superior ergonomics optomize optimal balance, size
and weight.
OnSite
Supply
12V NiCad
3/8" Impact Wrench Kit
12V NiCad
Compact Drill/Driver Kit
• Heavy-duty 1/2" ratcheting
chuck
• Superior ergonomics optomize optimal balance, size
and weight.
Safety
12V NiCad
1/2" Impact Wrench Kit
DC727KA
volt
287
Rentals
volt
NiCd
12
volt
12
12V NiCad
Drill/Driver Kit
NiCd
NiCd
12
Fasteners
Fasteners
9.6V - 7.2V NiCad Cordless
9.6V NiCd
3/8" Right Angle Drill Kit
Anchors
Anchors
DC750KA
D855KA
NiCd
volt
Strut
Strut
volt
9.6V NiCad
1/4" Hex Shank Impact
Driver Kit
Threaded
Threaded
Rod
• Heavy-duty 3/8'' single sleeve
ratcheting chuck for tighter
bit gripping ability.
• Dual speed range delivers
maximum versatility.
• 15-position adjustable clutch.
• Rubber grip for maximum
comfort.
• Compact size and lightweight
design
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdriver bit & impactresistant case.
Pipe
Hangers
Hangers
• KIT Includes (2) batteries, 1
hour charger, & impact-resistant case.
Specifications
Specifications
Volts:
9.6 V DC
Max. Power:
130 UWO
# of Speed Settings: 2
Max RPM:
0-300/0-1,100
Clutch Settings: 15
Weight:
3.4. lbs
Tools
Tools
Part No.
Description
DC750KA
9.6V Drill/Driver
Kit
NiCd
9.6
9.6V NiCad
3/8" Drill/Driver Kit
Volts:
Drive Size:
No Load Speed:
Impacts/min:
Max Torque:
Weight:
9.6 V DC
1/4" Hex
Drive
0-2,400 rpm
0-2,700 ipm
80 ft.-lbs.
3.3 lbs.
Part No.
Description
DC855KA
9.6V 1/4" Hex
Impact Driver Kit
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdriver bit & impactresistant case.
Specifications
Volts:
9.6 V DC
Max. Power:
130 UWO
# of Speed Settings: 2
Max RPM:
0-400/0-1,100
Clutch Settings: 2
Weight:
3.9. lbs
Part No.
Description
DW955K-2 9.6V Right Angle Drill/
Driver kit
DW920K-2
NiCd
NiCd
9.6
• Multi-grip
trigger
provides
comfort and
convenience
allowing the
user to get
into tight
spaces
• Variable
9.6
speed and
volt
reversing
gives the
user the ability to control
speed
• Durable, right angle transmission with sealed ball bearing
provides a longer tool life
7.2
volt
7.2V NiCd
2-Position Screwdriver
Kit
• Superior power to weight
ratio in a variety of fastening
applications.
• Adjustable 2-position handle
allows for operation as both
in-line and pistol-grip.
• Variable speed and reversing
trigger switch.
• Industrial quick-release hexshank chuck.
• Electric brake provides increased productivity
• Heavy-duty metal hinge provides secure and sustained
two-position lock.
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdrivewr bit & impactresistant case.
Specifications
Volts:
7.2 V DC
No Load Speed: 0-500 RPM
Max Torque:
80 in.-lbs.
Weight:
3.5. lbs
Part No.
Description
DW920K-2 7.2V 2-Position
Screwdriver Kit
Abrasives
Abrasives
Universal Chargers
NiCad Battery Packs - 12V - 9.6V - 7.2V
DW9117
OnSite
OnSite
Supply
Supply
• Charges DEWALT® 7.2V - 18V
NiCd and NiMH batteries.
• 3-Stage Charging System,
Thermal Protection and LED
Diagnostic indicators provides
maximum run-time and extends overall life of the battery.
DC9310
Part No.
Safety
Safety
DW9216
Description
DC9310
DW9216
DW9117
18V Charger
18V Dual-Port
Charger
18V 15 min.
Charger
DW9109 18V Charger
Vehicle Charger
Part No.
Description
DC9071
12V NiCd Battery
Pack
DW9061 9.6V NiCd
Battery Pack
DW9057 7.2V NiCd
Battery Pack
DW9109
Rentals
rentals
288
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Lighting
49-24-0185 V28 Li-Ion
Work Light
• Xenon incandescent bulb
LED Worklight
49-24-0146
• 90-degree pivoting aluminum head –
Impact and weather
resistant
• LED lights provide
2X brighter light and
runs twice as long as
incandescent bulbs
49-24-0171
Part No.
• Ergonomic, compact, and
lightweight design
• Fold-away utility hook
• 135 degree rotating head
• Flex neck design with lockable head clips.
• Wide angle beam of light.
• 8 hours run-time on a single
charge.
Battery/Charger not included
Part No.
DC509
DC519
DW919
• Built-in hook
allows hanging.
• Over-molded lens
• 13W fluorescent
bulb
• Lightweight, compact design
• Battery/Charger
not included
49-24-0145 Cordless Xenon
Worklight
49-24-0146 Cordless LED
Worklight
Description
M18 LED
Worklight
49-24-0171 M18 Worklight
Part No.
DC515
Job Site Radio
Part No.
Description
DC022
Worklight/DualPort Charger
18V Pivoting
Head Flashlight
• Wide angle
beam
• Head rotates
90°
• Lightweight,
compact
design
• Battery/
Charger not
included
Part No.
DW908
Description
18V Flashlight
Description
M12 Job Site Radio
Part No.
Description
2790-20 M18 Jobsite Radio
Washington D.C.
877-419-2755
Strut
OnSite
Supply
• AM/FM Tuner,
• Weather sealed
compartment -
Protects MP3 players and other audio
devices
• ABS polymer
and steel construction protects against
weather and abusive job site conditions
• Equalizer and 10-station presets
• Runs on Milwaukee M12™, M18™, V18™,
V28® , NiCd 12V to 28V, and 120V AC.
• 12V DC Output - Provides power to
charge most small electronic devices
Worksite Radio Charger
• Runs on and charges 7.2V to 18V NiCad
batteries.
• AM/FM Digital tuner,on LCD display, builtin clock, and 8 station memory presets.
• Auxiliary port allows connection to CD
players, MP3 players, iPods, with an
audio cable. (Cable not included).
Part No.
DC011
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
FEATURES:
• 10 Station Presets
• Equalizer
• Digital Display
• Storage compartment for iPod/MP3 player.
• Powered by M12 Li-Ion battery, AAA
Alkaline batteries or AC cord. (M12 battery & charger NOT included).
Philadelphia, PA
610-647-8070
Description
18V Fluorescent
Area Light
• Cordless/corded 38W fluorescent worklight runs on
12-18V DeWalt batteries or
AC power to provide area
lighting.
• 1 hour dual port battery
charger charges (2) DeWalt
7.2-18V batteries (NiCad).
• (3) GFCI protected power
outlets.
• Spring loaded battery hold
down keeps batteries secure.
• Quick and easy fold-up, transport and storage.
Jobsite Radio
Only 11" x 6.5" x 4",
this weather-resistant
radio features an
advanced digital tuner
and is compatable with
iPod® and MP3 players.
2590-20
36V Floodlight
28V Floodlight
18V Floodlight
Description
2735-20
Part No.
Description
Worklight/Charger w/GFCI Protection
Description
Worksite Radio Charger
289
Rentals
Part No.
36V, 28V & 18V
Floodlights
18V Fluorescent
Area Light
Lights do not include M12™
battery or charger
18V Li-Ion
Worklights
DC919
Threaded
Rod
Worklight
49-24-0145
Part No.
Description
DC509
DC519
Pipe
Hangers
Hands-free light in a compact
and lightweight package. Both
lights feature a 90° rotating
head. Integrated magnet provides hands-free use.
Tools
• Clip-Lok™
system ready.
• 140° pivoting head.
Abrasives
12V Li-Ion
Worklights
Worklight
2735-20
Anchors
Lighting
Fasteners
cordless Jobsite utility
Fasteners
Fasteners
Cordless Batteries and Chargers
Anchors
Anchors
Batteries
Part No.
DW9057
(NiCad)
Strut
Strut
DW9061
(NiCad)
DC9071
(NiCad)
Threaded
Threaded
Rod
DC9091
(NiCad)
Pipe
Hangers
Hangers
DC9096
(NiCad)
Voltage
Description
7.2V
Entire line of DeWalt 7.2V
NiCad Cordless Tools
(Except Univolt® line)
9.6V
Entire line of DeWalt 9.6V
NiCad Cordless Tools
(Except Univolt® line)
12V
Entire line of DeWalt 12V
NiCad Cordless Tools
(Except Univolt® line)
14.4V
Entire line of DeWalt 14.4V
NiCad Cordless Tools
(Except Univolt® line)
18V
Charger(s)
Part No.
Description
DW9310
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DW9216
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DC9117
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DW9109
7.2V - 18V
Universal
Vehicle
Nicad/NiMh/
Li-Ion Charger
Entire line of DeWalt 18V
NiCad Cordless Tools
(Except Univolt® line)
To ensure the maximum life of a NiCad battery pack, there are some guidelines which must be followed as general maintenance.
Tools
Tools
• Batteries perform best if charged at room temperatures. Do not charge in temperatures below 40°F or above 105°F. Under these conditions, the battery will
not take a full charge and may be permanently damaged. Store the battery in a cool, dry place. Temperatures exceeding 120°F may reduce the battery life.
• If the battery is hot, let it sit out of the charger for a least 2 hours until it is at room temperature.
• Do not try to discharge the battery beyond the point where the tool no longer performs with the power and torque needed for the job, this cause permanent damage which will prevent the battery from taking a full charge.
• Periodically charge the battery overnight to take full advantage of the 3-Stage Charging System for optimum runtime and battery life.
Batteries
Part No.
DC9180
Abrasives
Abrasives
(Li-Ion)
Voltage
Description
18V
Entire line of DeWalt 18V
NANO™ Li-Ion and NiCad
Cordless Tools
COMPACT
DC9181
18V
(Li-Ion)
OnSite
OnSite
Supply
Supply
DW0242
(NiCad)
DC9280
Safety
Safety
(Li-Ion)
24V
28V
Entire line of DeWalt 18V
NANO™ Li-Ion and NiCad
Cordless Tools
Entire line of DeWalt 24V
NiCad Cordless Tools
Charger(s)
Part No.
Description
DC9310
DC9216
(Dual-Port)
7.2V - 18V
Universal
Nicad/NiM h/
Li-Ion Charger
DW0246
24V Fan
Cooled Charger
DW0249
24V FanCooled Vehicle
Charger
Entire line of DeWalt 28V
NANO™ Li-Ion
Cordless Tools
DC9000
DC9360
(Li-Ion)
Rentals
rentals
290
36V
Entire line of DeWalt 28V
NANO™ Li-Ion
Cordless Tools
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
28V - 36V
NANO™ Li-Ion
Charger
Philadelphia, PA
610-647-8070
(NiCad)
9.6V
12V
(NiCad)
48-11-2401
(Li-Ion)
High Capacity
(XC)
48-11-2402
(Li-Ion)
48-11-1014
48-11-1024
2.4V NiCad
Charger
Entire line of Milwaukee
9.6V NiCad Cordless Tools
48-59-0192
Entire line of Milwaukee 12V
NiCad Cordless Tools
12V
Entire line of Milwaukee 12V
NiCad "Slide-On" Battery
Style Cordless Tools
12V
Entire line of Milwaukee 12V
M12 Li-Ion Cordless Tools
12V
14.4V
(NiCad)
48-11-2230
48-11-2232
(NiCad)
18V
Compact
48-11-1815
(Li-Ion)
18V
Entire line of Milwaukee 12V
M12 Li-Ion Cordless Tools
V18 Series
48-11-1830
18V
Entire line of Milwaukee
14.4V NiCad Cordless Tools
Entire line of Milwaukee 18V
NiCad Cordless Tools
48-59-0255
48-59-0186
(Vehicle)
12V, 14.4V,
18V NiCad
Charger
48-59-2401
12V Li-Ion
Charger for
2510-10
(Wall/Vehicle M12 Series
Tools
Charger)
48-59-0255
48-59-0186
(Vehicle)
Entire line of Milwaukee 18V
Li-Ion M18 Cordless Tools
Entire line of Milwaukee 18V
Li-Ion M18 Cordless Tools
18V
Entire line of Milwaukee 18V
V18 Li-Ion Cordless Tools
and ALL 18V NiCad Tools
28V
Entire line of Milwaukee 28V
V28 Li-Ion Cordless Tools
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Fasteners
48-59-0172
(Vehicle)
12V, 14.4V,
18V NiCad
Charger
48-59-1801
18V Li-Ion
Charger for
M18 Series
Tools
48-59-2818
18V & 28V
Li-Ion Charger AND 18V
NiCad Batteries
48-11-1833
Battery/Charger
Combo Pack
Incl. (2) V18
Batteries
(NOT compatible with V18)
(Li-Ion)
M28 (V28)
48-11-2830
9.6V - 12V
NiCad Charger
(Except M12 Plumb Laser &
Sub-Scanner™ Tools)
(NOT compatible with V18)
High Capacity
(XC)
48-11-1815
(Li-Ion)
Philadelphia, PA
610-647-8070
48-59-0300
(Except PowerPlus Models)
48-11-1970
(Li-Ion)
Entire line of Milwaukee
2.4V NiCad Cordless Tools
Threaded
Rod
48-11-0200
Description
Pipe
Hangers
(NiCad)
Part No.
Tools
48-11-0080
2.4V
Charger(s)
Abrasives
(NiCad)
Description
Hartford, CT
800-969-0285
291
OnSite
Supply
48-11-0100
Voltage
Safety
Part No.
Rentals
Batteries
Anchors
MILWAUKEE
Strut
Cordless Batteries and Chargers
Fasteners
Fasteners
Corded Drills
Pistol Grip Drills
7.0 Amp 1/4" Magnum® Drill
Anchors
Anchors
• Trigger speed control with reversing.
• Heavy-Duty keyed chuck.
• All-metal gear case.
• 8 ft. 3-wire Quik-Lok® cord with easy detachment for storage and service
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Strut
Strut
0101-20
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
1/4"
7.0
0-4000 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
3/8" - 24
On
3.8 lbs.
Description
0101-20 1/4" Magnum Drill
Threaded
Threaded
Rod
6.0 Amp 3/8" VSR® Drill
• All ball-bearing construction provides greater durability and longer tool life.
• Contoured textured handle provides better gripping surface and reduces user fatigue.
• Glass-filled nylon housing is durable and impact resistant.
• Belt clip conveniently holds tool and frees user's hands for other work.
Specifications
Pipe
Hangers
Hangers
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
D21002
120 V AC
3/8"
6.0
0-2500 rpm
Chuck Type:
Spindle:
Max Watts Out:
Weight:
Keyed
3/8 "- 20
480 W
3.2 lbs.
Description
D21002 3/8" VSR® Drill
6.0 Amp 3/8" VSR® Drill Kit w/Keyless Chuck
Tools
Tools
• 3/8" ratcheting keyless chuck offers greater bit retention.
• All ball-bearing construction for greater durability.
• Contoured textured handle provides better gripping surface and reduces user fatigue
• Built-in two-way level for drilling accurate vertical and horizontal holes
• Glass-filled nylon housing is durable and impact resistant.
Specifications
Abrasives
Abrasives
D21008K
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
3/8"
6.0
0-2,500 rpm
Keyless
Chuck Type:
Spindle:
3/8" - 24
Max Watts Out: 480
Weight:
3.5 lbs.
Description
D21008K 3/8" VSR® Drill w/keyless chuck
OnSite
OnSite
Supply
Supply
6.0 Amp 3/8" VSR® Drill w/ Metal Keyless Chuck
• All-metal chuck offers greater durability
• All ball-bearing construction for greater durability.
• 3/8" metal keyless chuck offers greater bit retention
• Contoured textured handle provides better gripping surface and reduces user fatigue
• Built-in two-way level for drilling accurate vertical and horizontal holes
• Glass-filled nylon housing is durable and impact resistant.
Specifications
Safety
Safety
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
D21009
120 V AC
3/8"
6.0
0-2,500 rpm
Chuck Type:
Keyless
Spindle:
3/8" - 24
Max Watts Out: 480
Weight:
3.5 lbs.
Description
Rentals
rentals
D21009 3/8" VSR® Drill w/metal keyless chuck
292
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Pistol Grip Drills
Fasteners
Corded Drills
Anchors
7.0 Amp 3/8" Magnum® Drills
• 7.0 amp motor,
• Features a heavy-duty keyed chuck.
• All-metal gear case.
• Includes chuck key, rubber key holder and side handle.
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
3/8"
7.0
0-1200 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
3/8 "- 20
Yes
4.2 lbs.
Strut
Specifications
0200-20
Description
0200-20 3/8" Magnum Drill w/keyed chuck
Threaded
Rod
7.0 Amp 3/8" Magnum® Drills
• 7.0 amp motor,
• Features 2-sleeve keyless chuck.
• All-metal gear case.
• Includes chuck key, rubber key holder and side handle.
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
3/8"
7.0
0-1200 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
3/8 "- 20
Yes
4.1 lbs.
Description
Pipe
Hangers
Specifications
0201-20
0201-20 3/8" Magnum Drill w/keyless chuck
Tools
5.5 Amp 1/2" Magnum® Drill
• Trigger speed control with reversing
• Heavy-Duty industrial chuck
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts:
Chuck Size:
Amps:
No Load Speed:
120 V AC
1/2"
5.5
0-850 rpm
Part No.
Description
0234-6
1/2" Magnum Drill
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
Yes
4.8 lbs.
Abrasives
0234-6
OnSite
Supply
7.8 Amp 1/2" VSR® Drill
• Helical-cut steel, heat-treated gears for increased durability and long gear life.
• Metal gear housing for durability and increased reliability.
• 2-finger trigger for increased comfort.
• 360° side handle for greater control and versatility.
Specifications
Part No.
120 V AC
1/2"
7.8
0-850 rpm
Chuck Type:
Spindle:
Max Watts Out:
Weight:
Keyed
1/2" - 20
600 W
4.2 lbs.
Safety
Volts:
Chuck Size:
Amps:
No Load Speed:
Description
DW235G
DW235G 1/2" VSR® Drill
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
293
Rentals
Fasteners
Fasteners
Corded Drills
Pistol Grip Drills, Spade Handle Drills
8.0 Amp 1/2" Magnum® Drills
Anchors
Anchors
• Features an Ergonomic Tactile Grip
• Trigger speed control with reversing.
• Heavy-duty keyed chuck.
• All-metal gear case
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Strut
Strut
0300-20
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
1/2"
8.0
0-850 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
Yes
5.4 lbs.
Description
0300-20 1/2" Magnum Drill w/Ergonomic Tactile Grip
Threaded
Threaded
Rod
8.0 Amp 1/2" Magnum® Drill
• Trigger speed control with reversing.
• Heavy-Duty keyed chuck.
• All-metal gear case.
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Pipe
Hangers
Hangers
0299-6
Volts:
Chuck Size:
Amps:
No Load Speed:
120 V AC
1/2"
8.0
0-850 rpm
Part No.
Description
0299-6
1/2" Magnum Drill
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
Yes
5.4 lbs.
8.0 Amp 1/2" Magnum® Drills
Tools
Tools
• Features an Ergonomic Tactile Grip
• Trigger speed control with reversing.
• Heavy-duty keyed chuck.
• All-metal gear case
• features ratcheting chuck with carbide jaws for 2X grip strength on bit
• Includes chuck key, rubber key holder and side handle.
Abrasives
Abrasives
Specifications
0302-20
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
1/2"
8.0
0-850 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
Yes
5.6 lbs.
Description
0302-20 1/2" Magnum Drill w/Ergonomic Tactile Grip and Ratcheting Chuck
OnSite
OnSite
Supply
Supply
9.0 Amp 1/2" Spade Handle Drill
• Variable speed reversing switch avoids air bubbles when mixing mud and offers greater
control when drilling
• Increased torque for drilling and mud mixing
• Soft grip handle provides superior comfort and ergonomics.
• 2-position rear spade handle and 3-position side handle gives greater control for all drilling
and mixing applications.
Specifications
Safety
Safety
DW130V
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
1/2"
9.0
0-0-550 rpm
Chuck Type:
Keyed
Max Watts Out: 600
Weight:
7.5lbs.
Description
Rentals
rentals
DW130V 1/2" VSR® Spade Handle Drill
294
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
D-Handle, Right Angle (R.A.D) Drills
Fasteners
Corded Drills
7.0 Amp 1/2" D-Handle Drills
Anchors
• 1/2 in. capacity in steel.
• Powerful 7 amp Milwaukee built motor.
• Trigger speed control, reversing.
• Double gear reduction.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts:
Chuck Size:
Amps:
No Load Speed:
120 V AC
1/2"
7.0
0-1000 rpm
Part No.
Description
1250-1
1/2" D-Handle Drill
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
On
6.5 lbs.
1250-1
Strut
7.0 Amp 1/2" D-Handle Drills
Threaded
Rod
• 1/2 in. capacity in steel.
• Powerful 7 amp Milwaukee built motor.
• Trigger speed control, reversing.
• Double gear reduction.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts:
Chuck Size:
Amps:
No Load Speed:
120 V AC
1/2"
7.0
0-500 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Part No.
Description
1107-6
1/2" D-Handle Drill
Keyed
1/2" - 20
On
6.8 lbs.
1107-6
Pipe
Hangers
1/2" Right Angle Drill
• 1/2" capacity in steel, handles up to a 2-9/16" selfeed bit
• Two speeds: 335 and 750 rpm w/ R.A.D. Attachment
• Powerful 7 amp motor
• Head and handle swivel 360°
Specifications
Part No.
3102-6
3107-6
120 V AC
1/4"
7.0
0-500 rpm
Chuck Type:
Spindle:
Trigger Lock:
Weight:
Keyed
1/2" - 20
On
10.3 lbs.
Tools
Volts:
Chuck Size:
Amps:
No Load Speed:
3107-6
Description
1/2" Right Angle Drill, Plumbers Kit
1/2" Right Angle Drill
Abrasives
1/2" Right Angle Drill Kit
• Three speed ranges.
• Die-cast metal gear housing for durability & reliability.
• 5-position side handle.
• 360° right angle attachment improves access to confined areas.
Volts:
Chuck Size:
Amps:
No Load Speed:
Part No.
120 V AC
Chuck Type:
Keyed
1/2"
Spindle:
1/2" - 20
7.0
Max Watts Out: 580
400 / 600 / 900 rpm Weight:
9.75 lbs.
OnSite
Supply
Specifications
DW120K
Description
33° Angle Drive Kit
Part No.
Description
• For drill models 1001-1, 1007-1, 1101-1, 1107-6 & 1250-1.
• Extends drill reach up to 30", Use with RAD Kit 48-06-2871
Part No.
48-06-2860 33° Angle Kit
Philadelphia, PA
610-647-8070
30" Extension
Description
48-95-0400 30" Extension
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
295
Rentals
• For drill models 1001-1, 10071, 1101-1, 1107-6 & 1250-1.
Safety
DW120K 1/2" Right Angle Drill
Fasteners
Fasteners
Corded Drills
3/4" Large Drill
Hole-Hawgs®
• 3/4 in. capacity in steel
• 350 rpm, reversing
• Powerful 10 amp motor
• #3 Jacobs taper spindle.
Anchors
Anchors
1/2" Compact Drills
Strut
Strut
• 1/2 in. capacity in steel.
• Extra long switch and pipe
handle for maximum leverage.
• Rear mounted assist spade
handle.
• Reversing.
• Powerful 7 amp motor.
• Heat treated gears are HelicalCut for quiet performance.
Specifications
1610-1 Specifications
Threaded
Threaded
Rod
1610-1
1630-1
1660-1
1663-1
Pipe
Hangers
Hangers
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
Specifications
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
Part No.
1610-1
Tools
Tools
1663-1
Description
120 V AC
1/2"
7.0
900 rpm
Keyed
5/8" - 16
11.2 lbs.
1660-1 Specifications
Drill
Drill
Drill
Drill
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
120 V AC
1/2"
7.0
450 rpm
Keyed
5/8" - 16
11.2 lbs.
1/2" Super-Hawg® Drill
• Clutch in low speed
• High operating speeds for
maximum productivity
• 90° left-right, Roto-Lok®
handle for maximum operating comfort
• Easy turn gear shift knob
• Comfort grip switch handle
and gear case with front Tbar handle.
Abrasives
Abrasives
OnSite
OnSite
Supply
Supply
Specifications
Safety
Safety
1675-6
1676-6
Rentals
rentals
296
3/4"" Large Drill
350 rpm
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
120 V AC
1/2"
7.5
300/1200 rpm
Keyed
5/8" - 16
11.5 lbs.
Description
1/2" Hole-Hawg®
1/2" Hole-Hawg® (incl. Carrying Case)
Hartford, CT
800-969-0285
Specifications
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
Part No.
120 V AC
1/2"
13
450/1750 rpm
Keyed
5/8" - 16
14.7 lbs.
Description
1680-21 1/2" Super-Hawg®
(incl. Carrying Case)
• Includes chuck key with holder,
2-position side handle, bail
handle and case.
• Compact design for drilling between studs and joists.
• 2-position Pipe Handle, 3-position
spade handle.
• 2-speed gear shift.
• Can power up to 4-5/8" Self-feed
bit in low speed and drill up to
1-3/8" Self-feed bit in high speed.
Part No.
1854-1
Description
1680-21
1/2" Hole-Hawg® Drill
1675-6
Part No.
120 V AC
3/4"
10.0
115-450 rpm
Keyed
#3 J.T.
19 lbs.
1630-1 Specifications
120 V AC
1/2"
7.0
115-450 rpm
Keyed
5/8" - 16
11.9 lbs.
1/2" Compact
650 rpm
1/2" Compact
900 rpm
1/2" Compact
450 rpm
1/2" Compact
115-450 rpm
1630-1
1660-6
1854-1
120 V AC
1/2"
7.0
650 rpm
Keyed
5/8" - 16
11.2 lbs.
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
DWD460K
1/2" VSR Stud
& Joist Drill
• Bind-Up Control stall sensing for increased control of
reactionary torque.
• 11 amp motor.
• Two speed ranges.
• Mechanical clutch in low
speed for increased gear
protection.
• Metal gear housing for durability & reliability.
• Adjustable front handle and
2-position side handle.
• 360° right angle attachment
improves access to confined
areas.
Boston , MA
800-645-6155
Specifications
Volts:
120 V AC
Chuck Size:
1/2"
11.0
Amps:
Max Watts Out: 1015
No Load Speed: 330/1300 rpm
Chuck Type:
Keyed
Capacity in Wood:
Spade Bit:
1-1/2"
Self-Feed:
4-5/8"
Hole Saw:
6"
Auger Bit:
1-1/2"
Capacity in Steel:
Twist Bit:
1/2"
Hole Saw:
5"
Weight:
11.75 lbs.
Part No.
Description
DWD460K 1/2" VSR Stud &
Joist Drill
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• Metal framed gear train for
longer gear life.
• Large paddle trigger for
smooth control and easy grip
in any position.
• Angled chuck for reaching
close quarters other drills
cannot reach.
• Textured palm grip reduces
slipping.
• 100% ball-bearing construction provides durability and
longer tool life.
• Compact right-angle design for
easy access in tight places.
• Paddle switch is ideal for use
in awkward positions and
limited access areas.
• Shielded chuck protects user &
improves grip in confined areas.
• Double gear reduction increases torque performance
and decreases gear stress.
Specifications
Specifications
3/8" Close Quarter Drill
Volts:
Chuck Size:
Amps:
No Load Speed:
Chuck Type:
Spindle:
Weight:
Part No.
120 V AC
3/8"
3.5
0-1,300 rpm
Keyed
1/2" - 20
3.9 lbs.
Volts:
120 V AC
Chuck Size:
3/8"
3.7
Amps:
No Load Speed: 0-1,200 rpm
Chuck Type:
Keyed
Max Watts Out: 200 W
3.75 lbs.
Weight:
Part No.
Description
0370-20 3/8" Close Quarter
Drill
Description
DW160V 3/8" VSR® Right
Angle Drill
Part No.
Anchors
DW1169
DW1956
DW1958
DW1969
14-pc.
16-pc.
18-pc.
29-pc.
Description
set,
set,
set,
set,
Sizes
Sizes
Sizes
Sizes
1/16"
1/16"
1/16"
1/16"
through
through
through
through
3/8"
1/2"
1/2"
1/2"
by
by
by
by
64th's
64th's
64th's
64th's
by
by
by
by
32nd's
64th's
64th's
64th's
Thunderbolt®
Black Oxide Drill Bit Sets
• Thunderbolt® web, provides longer life
and faster drill times.
• Parabollic flute, clears chips faster.
• 135° split point, precision start no
walking.
• 3-Flat Secure Grip Shank, reduces bit
slipping in chuck.
Part No.
48-89-2800 14-pc.
48-89-2803 15-pc.
48-89-2801 21-pc.
48-89-2802 29-pc.
Strut
3/8" VSR®
Right Angle Drill
Threaded
Rod
DW160V
• Starts on contact for clean,
accurate holes.
• No-spin shank eliminates bit
spinning in chuck
• All sets packaged in DeWalt's
Tough-Case™
Pipe
Hangers
0370-6
Pilot Point Gold Ferrous
Oxide Twist Drill Bit Sets
Description
set,
set,
set,
set,
Sizes
Sizes
Sizes
Sizes
1/16"
1/16"
1/16"
1/16"
through
through
through
through
1/2"
3/8"
1/2"
1/2"
Tools
Close Quarter / Right Angle Drills
Fasteners
Corded drills / drill bit sets
48-89-0025
29-Piece Sets
48-89-0045
1/16 thru 1/2 x 64ths
Description
CCT129SP #705 SP Split point
CCT129SPSM #1705 screw machine length
OnSite
Supply
Micro Drills
15-Piece Sets
1/16 thru 1/2 x 32nds
Description
Jobber Length Cobalt Twist Drill Sets
CCT115SP 115SP Split point
• Cobalt, drills easily through tough alloys
• Abrasive and heat resistant
• Heavy-duty 135° split point for easy starting on hard materials
No. 712
8-Piece Silver and Deming
Sets in Plastic Case
Includes 9/16”, 5/8”,11/16”, 3/4”,
13/16”, 7/8”, 15/16”, 1”, 1/2” Shank
Part No.
CCT7128P
Part No.
Set Size
Description
48-89-0025
48-89-0045
15-Pc Cobalt
13-Pc Cobalt
1/16 - 1/2 by 32nds
1/16 - 1/4 by 64ths
Safety
Part No.
Description
8-piece silver and Deming sets in plastic case
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
297
Rentals
Part No.
Abrasives
Twist Drill Bits - Sets
Fasteners
Drill bits
Anchors
Thunderbolt® Black Oxide Drill Bits
Pilot Point Gold Ferrous Oxide Twist Drill Bits
• Thunderbolt® web, provides longer life and faster drill times.
• Parabollic flute, clears chips faster.
• 135° split point, precision start no walking.
• 3-Flat Secure Grip Shank, reduces bit slipping in chuck.
• Starts on contact for clean, accurate holes.
• No-spin shank eliminates bit spinning in chuck
Part No.
DW1904B
Qty/Card
Size
12
1/16"
Style
Strut
Threaded
Rod
Spilt Point®
Dia.
Pipe
Hangers
Tools
Abrasives
DW1905B
12
5/64"
Spilt Point®
DW1906B
12
3/32"
Spilt Point®
DW1907B
12
7/64"
Spilt Point®
DW1908B
12
1/8"
Pilot Point®
DW1909B
12
9/64"
Pilot Point®
DW1910B
12
5/32"
Pilot Point®
DW1911B
12
11/64"
Pilot Point®
DW1913B
12
3/16"
Pilot Point®
DW1914B
12
7/32"
Pilot Point®
DW1915B
12
15/64"
Pilot Point®
DW1916B
12
1/4"
Pilot Point®
DW1917B
12
17/64"
Pilot Point®
DW1918B
12
9/32"
Pilot Point®
DW1919B
12
19/64"
Pilot Point®
DW1920B
6
5/16"
Pilot Point®
DW1921B
6
21/64"
Pilot Point®
DW1922B
6
11/32"
Pilot Point®
DW1923B
6
23/64"
Pilot Point®
DW1924B
6
3/8"
Pilot Point®
DW1925B
6
25/64"
Pilot Point®
DW1926B
6
13/32"
Pilot Point®
DW1927B
6
27/64"
Pilot Point®
DW1928B
6
7/16"
Pilot Point®
DW1929B
6
29/64"
Pilot Point®
DW1930B
6
15/32"
Pilot Point®
DW1931B
6
31/64"
Pilot Point®
DW1932B
6
1/2"
Pilot Point®
Part No.
48-89-2710
48-89-2711
48-89-2712
48-89-2713
48-89-2714
48-89-2715
48-89-2716
48-89-2717
48-89-2718
48-89-2719
48-89-2720
48-89-2721
48-89-2722
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
11/64"
3/16"
13/64"
7/32"
15/64"
1/4"
Part No.
OnSite
Supply
Diameter
(in)
Shank
Dia. (in)
Overall
Length (in)
48-27-0251
48-27-0311
48-27-0371
48-27-0441
48-27-0501
48-27-0561
48-27-0621
48-27-0681
48-27-0751
48-27-0811
48-27-0871
48-27-0941
48-27-1001
48-27-1121
48-27-1251
48-27-1371
48-27-1501
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-3/8
1-1/2
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
6-3/16
6-3/16
6-1/16
6-1/16
6-1/8
6-1/8
6-1/8
6-1/8
6-3/8
6-1/8
6-1/8
6-3/16
6-3/16
6-3/8
6-3/8
6-3/8
6-3/8
48-27-1501
12" Boring Bit Extension for 1/4" shank bits
For high performance drilling in both portable and fixed
operations. Self-centering 135° split point.
Safety
XL5-1/16"
XL5-5/64"
XL5-3/32"
XL5-7/64"
XL5-1/8"
XL5-9/64"
XL5-5/32"
Rentals
298
EDP No./Dia. EDP No./Dia.
EDP No./Dia.
XL5-11/64"
XL5-3/16"
XL5-13/64"
XL5-7/32"
XL5-15/64"
XL5-1/4"
XL5-17/64"
XL5-9/32"
XL5-19/64"
XL5-5/16"
XL5-21/64"
XL5-11/32"
XL5-23/64"
XL5-3/8"
Hartford, CT
800-969-0285
Part No.
48-89-2723
48-89-2724
48-89-2725
48-89-2726
48-89-2727
48-89-2728
48-89-2729
48-89-2730
48-89-2731
48-89-2732
48-89-2733
48-89-2734
48-89-2736
48-89-2738
17/64"
9/32"
19/64"
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
15/32"
1/2"
Flat Boring Bits and Extensions
1/4” to 1-1/2” Diameters
XL5 Series Jobber Drill Bits
The Best Choice for Stainless Steel
EDP No./Dia.
Dia.
XL5-25/64"
XL5-13/32"
XL5-27/64"
XL5-7/16"
XL5-29/64"
XL5-15/32"
XL5-32/64"
XL5-1/2"
49-22-0185 QUIK-LOK® STUBBY SET
Flat Boring Bit Sets
Part No.
Description
49-22-0175 8-pc. QUIK-LOK set, w/ Quick-Change Extension
49-22-0185 6-pc. QUIK-LOK Stubby set, w/ Quick-Change Extension
49-22-0171 6-pc. set, Sizes 3/8" through 1"" by 1/8th's
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1DHSD
3DHSD
4DHSD
6DHSD
7DHSD
9DHSD
10DHSD
12DHSD
14DHSD
15DHSD
Size
1/64"
1/32"
3/64"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
Size
Part No.
Size
11/64"
3/16"
13/64"
7/32"
15/64"
1/4"
17/64"
9/32"
19/64"
5/16"
21/64"
34DHSD
35DHSD
37DHSD
39DHSD
40DHSD
42DHSD
43DHSD
45DHSD
46DHSD
48DHSD
50DHSD
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
29/64"
15/32"
31/64"
1/2"
Part No.
17DHSD
18DHSD
20DHSD
21DHSD
23DHSD
25DHSD
26DHSD
28DHSD
29DHSD
31DHSD
32DHSD
High Speed Steel Letter Size Drill Bits
Cobalt Silver & Deming
Drill Bits - 1/2” Shank
Part No.
Size
56DCSD
62DCSD
68DCSD
75DCSD
81DCSD
87DCSD
92DCSD
93DCSD
100DCSD
112DCSD
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
59/64"
15/16"
1"
1-1/8"
Aircraft Drills
Part No.
12D600ADB
15D600ADB
18D600ADB
21D600ADB
25D600ADB
25D1200ADB
37D600ADB
37D1200ADB
50D600ADB
50D1200ADB
Philadelphia, PA
610-647-8070
Size
1/8" x 6"
5/32" x 6"
3/16" x 6"
7/32" x 6"
1/4" x 6"
1/4" x 12"
3/8" x 6"
3/8" x 12"
1/2" x 6"
1/2" x 12"
Cobalt Drill Bits
Part No.
Size
6DCDB
7DCDB
9DCDB
10DCDB
12DCDB
14DCDB
15DCDB
17DCDB
18DCDB
20DCDB
21DCDB
23DCDB
25DCDB
26DCDB
28DCDB
29DCDB
31DCDB
32DCDB
34DCDB
35DCDB
37DCDB
39DCDB
40DCDB
42DCDB
43DCDB
45DCDB
46DCDB
48DCDB
50DCDB
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
39/64
15/32
31/64
1/2
Washington D.C.
877-419-2755
Part No.
Size
999AHSD
999BHSD
999CHSD
999DHSD
999EHSD
999FHSD
999GHSD
999HHSD
A
B
C
D
E
F
G
H
Part No.
Size
999IHSD
999JHSD
999KHSD
999LHSD
999MHSD
999NHSD
999OHSD
999PHSD
999QHSD
Part No.
I
J
K
L
M
N
O
P
Q
999RHSD
999SHSD
999THSD
999UHSD
999VHSD
999WHSD
999XHSD
999YHSD
999ZHSD
Size
R
S
T
U
V
W
X
Y
Z
High Speed Steel Number Size Drill Bits
Part No.
Size
Part No.
Size
Part No.
Size
1NHSD
2NHSD
3NHSD
4NHSD
5NHSD
6NHSD
7NHSD
8NHSD
9NHSD
10NHSD
11NHSD
12NHSD
13NHSD
14NHSD
15NHSD
16NHSD
17NHSD
18NHSD
19NHSD
20NHSD
21NHSD
22NHSD
23NHSD
24NHSD
25NHSD
26NHSD
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27NHSD
28NHSD
29NHSD
30NHSD
31NHSD
32NHSD
33NHSD
34NHSD
35NHSD
36NHSD
37NHSD
38NHSD
39NHSD
40NHSD
41NHSD
42NHSD
43NHSD
44NHSD
45NHSD
46NHSD
47NHSD
48NHSD
49NHSD
50NHSD
51NHSD
52NHSD
53NHSD
27
28
29
30
31
32
33
34
35
36
37
38
39
40N
41
42
43
44
45
46
47
48
49
50
51
52
53
54NHSD
55NHSD
56NHSD
57NHSD
58NHSD
59NHSD
60NHSD
61NHSD
62NHSD
63NHSD
64NHSD
65NHSD
66NHSD
67NHSD
68NHSD
69NHSD
70NHSD
71NHSD
72NHSD
73NHSD
74NHSD
75NHSD
76NHSD
77NHSD
78NHSD
79NHSD
80NHSD
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
299
Strut
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
1-1/8
1-1/4
1-3/8
Part No.
Threaded
Rod
87DSDB
89DSDB
90DSDB
92DSDB
93DSDB
95DSDB
96DSDB
98DSDB
100DSDB
112DSDB
135DSDB
137DSDB
Size
Pipe
Hangers
11/16"
45/64"
23/32"
47/64"
3/4"
49/64"
25/32
51/64
13/16
53/64
27/32
55/64
Part No.
Tools
68DSDB
70DSDB
71DSDB
73DSDB
75DSDB
76DSDB
78DSDB
79DSDB
81DSDB
82DSDB
84DSDB
85DSDB
33/64"
17/32"
35/64"
9/16"
37/64"
19/32"
39/64"
5/8"
41/64"
21/32"
43/64"
Size
Abrasives
Part No.
OnSite
Supply
51DSDB
53DSDB
54DSDB
56DSDB
57DSDB
59DSDB
60DSDB
62DSDB
64DSDB
65DSDB
67DSDB
Size
Safety
Part No.
High Speed Steel Fractional Drill Bits
Rentals
Silver and Deming Drills – 1/2" Shank
Anchors
Drill Bits - Fractions, Letters, Numbers S&D
Fasteners
Drill Bits
Fasteners
Drill Bits / Taps
Drill Bits
Taps
Anchors
Strut
Threaded
Rod
Pipe
Hangers
High Speed Steel
Reduced Shank Drill Bits
High Speed Steel
Stub Length Drill Bits
Part No.
Size Shank
Part No.
37DRSD/SH1/4
43DRSD/SH1/4
50DRSD/SH1/4
43DRSD/SH3/8
50DRSD/SH3/8
62DRSD/SH3/8
3/8
7/16
1/2
7/16
1/2
5/8
1/4
1/4
1/4
3/8
3/8
3/8
Cobalt Screw Machine
Drill Bits
Part No.
Size
12DCDB/SM
18DCDB/SM
28DCDB/SM
31DCDB/SM
50DCDB/SM
1/8
3/16
9/32
5/16
1/2
Double End Drill Bits
Part No.
Size
Tools
Abrasives
OnSite
Supply
Safety
Rentals
10DDED
12DDED
14DDED
15DDED
18DDED
20DDED
21DDED
25DDED
30DDED
Tap
Size
Drill
Size
%
Thread
0-80 NF
M1.6 x .35
1-64 NC
M2 x .4
1-72 NF
2-56 NC
2-64 NF
M2.5 x .45
3-48 NC
3-56 NF
4-40 NC
4-48 NF
M3 x .5
M3 x .5
5-40 NC
5-44 NF
M3.5 x .6
6-32 NC
6-40 NF
M4 x .7
8-32 NC
8-36 NF
3/64”
1.25 mm
53 mm
52 mm
53 mm
50 mm
50 mm
46 mm
5/64”
#46
#43
#42
#40
#40
#38
#37
#32
#36
#33
#30
#29
#29
71
69
59
66
67
62
70
67
70
69
65
61
70
70
65
63
63
72
69
73
62
70
7/64
1/8
9/64
5/32
3/16
13/64
7/32
1/4
#30
Part No.
Size
4DSLD
6DSLD
7DSLD
9DSLD
10DSLD
12DSLD
14DSLD
15DSLD
17DSLD
18DSLD
20DSLD
21DSLD
23DSLD
25DSLD
26DSLD
28DSLD
29DSLD
31DSLD
32DSLD
34DSLD
35DSLD
37DSLD
39DSLD
40DSLD
42DSLD
43DSLD
45DSLD
46DSLD
48DSLD
50DSLD
SH3/8
29NSLD
34NSLD
Carbon Steel Taper Taps
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
(3/8SHNK)
#29
#34
1CTAT/CAS
2CTAT/CAS
3CTAT/CAS
4CTAT/CAS
5CTAT/CAS
6CTAT/CAS
8CTAT/CAS
10CTAT/CAS
12CTAT/CAS
25CTAT/CAS
31CTAT/CAS
37CTAT/CAS
43CTAT/CAS
50CTAT/CAS
56CTAT/CAS
62CTAT/CAS
75CTAT/CAS
87CTAT/CAS
100CTAT/CAS
0FTAT/CAS
Size
Part No.
1-64
2-56
3-48
4-40
5-40
6-32
8-32
10-24
12-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
0-80
1FTAT/CAS
2FTAT/CAS
3FTAT/CAS
4FTAT/CAS
5FTAT/CAS
6FTAT/CAS
8FTAT/CAS
10FTAT/CAS
12FTAT/CAS
25FTAT/CAS
31FTAT/CAS
37FTAT/CAS
43FTAT/CAS
50FTAT/CAS
56FTAT/CAS
62FTAT/CAS
75FTAT/CAS
87FTAT/CAS
100FTAT/CAS
High Speed Steel
Taper Taps
Part No.
6CTAT/HSS
8CTAT/HSS
10CTAT/HSS
10FTAT/HSS
Size
1-72
2-64
3-56
4-48
5-44
6-40
8-36
10-32
12-28
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
9-16-18
5/8-18
3/4-16
7/8-14
1-14
Pipe Thread Taper Taps
Part No.
Size
Size
12PTAT/PT
25PTAT/PT
37PTAT/PT
50PTAT/PT
75PTAT/PT
6-32
8-32
10-24
10-32
1/8-27
1/4-18
3/8-18
1/2-14
3/4-14
Drill and Tap Size Chart
300
Tap
Size
10-24 NC
10-32 NF
M5 x .8
12-24 NC
M6 x 1.0
1/4-20 NC
1/4-28 NF
5/16-18 NC
5/16-24 NF
M8 x 1.25
3/8-16 NC
3/8-24 NF
M10 x 1.5
7/16-14 NC
7/16-20 NF
M12 x 1.75
1/2-13 NC
1/2-20 NF
M14 x 2.0
9/16-12 NC
9/16-18 NF
Hartford, CT
800-969-0285
Drill
Size
%
Thread
#25
#21
#19
#16
#9
#7
#3
G
1
H
O
Q
8.5 mm
U
25/64"
13/32"
27/64"
29/64"
12.0 mm
31/64"
33/64"
69
68
68
66
71
70
72
66
67
70
68
71
71
70
65
69
73
65
72
68
58
Boston , MA
800-645-6155
Tap
Size
5/8-11 NC
5/8-18 NF
M16 x 2.0
3/4-10 NC
3/4-16 NF
M20 x 2.5
7/8-9 NC
M24 x 3.0
1-8 NC
1-12 NF
1-14 NS
1-1/8-7 NC
1-1/8-12 NF
M30 x 3.5
1-1/4-7 NC
1-1/4-12 NF
1-3/8-6 NC
1-3/8-12 NF
M36 x 4.0
1-1/2-6 NC
1-1/2-12 NF
Washington D.C.
877-419-2755
Drill
Size
%
Thread
35/64"
37/64"
35/64"
21/32"
11/16"
11/16"
25/32"
53/64"
7/8"
59/64"
15/16"
63/64"
1-3/64”
1-3/64”
1-1/8”
1-11/64”
1-7/32”
1-19/64”
1-1/4”
1/11/1932
1-27/64”
62
58
76
68
71
74
61
72
73
67
61
72
66
75
67
72
72
72
82
72
72
Philadelphia, PA
610-647-8070
Designed Specifically for
Sheet Metal Hole Cutting
Carbon Steel Plug Taps
1-64
2-56
3-48
4-40
5-40
6-32
8-32
10-24
12-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
0-80
1FPLT/CAS
2FPLT/CAS
3FPLT/CAS
4FPLT/CAS
5FPLT/CAS
6FPLT/CAS
8FPLT/CAS
10FPLT/CAS
12FPLT/CAS
25FPLT/CAS
31FPLT/CAS
37FPLT/CAS
43FPLT/CAS
50FPLT/CAS
56FPLT/CAS
62FPLT/CAS
75FPLT/CAS
87FPLT/CAS
100FPLT/CAS
1-72
2-64
3-56
4-48
5-44
6-40
8-36
10-32
12-28
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
9-16-18
5/8-18
3/4-16
7/8-14
1-14
Carbon Steel Bottom Taps
Part No.
Size
Part No.
Size
1CBOT/CAS
2CBOT/CAS
3CBOT/CAS
4CBOT/CAS
5CBOT/CAS
6CBOT/CAS
8CBOT/CAS
10BOLT/CAS
12CBOT/CAS
25CBOT/CAS
31CBOT/CAS
37CBOT/CAS
43CBOT/CAS
50CBOT/CAS
56CBOT/CAS
62CBOT/CAS
75CBOT/CAS
87CBOT/CAS
100CBOT/CAS
112CBOT/CAS
125CBOT/CAS
1-64
2-56
3-48
4-40
5-40
6-32
8-32
10-24
12-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4-7
137CBOT/CAS
150CBOT/CAS
0FBOT/CAS
1FBOT/CAS
2FBOT/CAS
3FBOT/CAS
4FBOT/CAS
5FBOT/CAS
6FBOT/CAS
8FBOT/CAS
10FBOT/CAS
12FBOT/CAS
25FBOT/CAS
31FBOT/CAS
37FBOT/CAS
43FBOT/CAS
50FBOT/CAS
56FBOT/CAS
62FBOT/CAS
75FBOT/CAS
87FBOT/CAS
100FBOT/CAS
1-3/8-6
1-1/2-6
0-80
1-72
2-64
3-56
4-48
5-44
6-40
8-36
10-32
12-28
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
9-16-18
5/8-18
3/4-16
7/8-14
1-14
• Accurate, Burr-Free Holes
Precision ground carbide teeth
for fast cutting of clean, round
holes
• Will Not Damage Work
Over-drill stopper prevents the
tool from penetrating beyond
the hole
• Starts on Contact
Split point pilot bit for faster
penetration and less walking
Part
No.
Model
No.
Diameter
(Inches)
20092
20093
20094
20096
20097
20098
20100
20102
20103
20104
20105
20108
20109
20113
20114
12CHC
14CHC
16CHC
18CHC
19.5CHC
20CHC
22CHC
24CHC
28CHC
32CHC
34CHC
40CHC
42CHC
44CHC
48CHC
3/4” x 1/2”
7/8” x 1/2”
1” x 1/2”
1-1/8” x 1/2”
1-7/32" x 1/2"
1-1/4” x 1/2”
1-3/8” x 1/2”
1-1/2” x 1/2”
1-3/4” x 1/2”
2” x 1/2”
2-1/8” x 1/2”
2-1/2” x 1/2”
2-5/8” x 1/2”
2-3/4” x 1/2”
3” x 1/2”
Accessories
Description
30879
30880
30005
30003
1/4" split point stubby pilot bit
Plug ejection spring
3/8" arbor for 11CHC - 19.5CHC
1/2" arbor for 20CHC - 48CHC
35PD
3CHC-AS
5L
3L
Philadelphia, PA
610-647-8070
5L
5L
5L
5L
5L
3L
3L
3L
3L
3L
3L
3L
3L
3L
3L
7/8", 1-1/8", 1-3/8", Arbors: 3L, 5L, 1/4" split
point pilot bit, plug ejection springs, 1/8" hex
wrench
30878 - 15 Piece Electrician's Kit
7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", Arbors:
3L, 5L, 1/4" split point pilot bit, plug ejection
springs, 1/8" hex wrench
Combo Drill/Tap Bit Set
6-32 to 1/4-20 6 piece drill/tap
set and individual bits. For up
to 10 gauge mild steel, copper,
brass and aluminum. 1/4" hex
shank.
Part No.
Description
DTAPKIT
6-32 to 1/4-20
6-pc. drill/tap set
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Safety
Size
10-24
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
10-32
Hartford, CT
800-969-0285
301
Rentals
10CPLT/HSS
25CPLT/HSS
31CPLT/HSS
37CPLT/HSS
50CPLT/HSS
51CPLT/HSS
10FPLT/HSS
Arbor
—
1/2”
—
3/4”
—
—
—
—
1-1/4”
1-1/2”
—
2”
—
—
—
30877 - 12 Piece Electrician's Kit
High Speed Steel
Plug Taps
Part No.
Conduit
Size
Threaded
Rod
1CPLT/CAS
2CPLT/CAS
3CPLT/CAS
4CPLT/CAS
5CPLT/CAS
6CPLT/CAS
8CPLT/CAS
10CPLT/CAS
12CPLT/CAS
25CPLT/CAS
31CPLT/CAS
37CPLT/CAS
43CPLT/CAS
50CPLT/CAS
56CPLT/CAS
62CPLT/CAS
75CPLT/CAS
87CPLT/CAS
100CPLT/CAS
0FPLT/CAS
Pipe
Hangers
Size
Tools
Part No.
Abrasives
Size
OnSite
Supply
Part No.
Fasteners
Carbide Hole Cutter
Anchors
Taps
Strut
TAPS / carbide-tipped cutters
Fasteners
Carbide-Tipped Cutters
Sheet Metal Carbide Hole Cutters
Quick Change Sheet Metal Carbide Tooth Hole Saws
Anchors
Strut
• Designed for hand held
applications to produce drill
press quality holes
• Drills burr free hole
• Heavy-duty cutting
performance
• One arbor fits all cutters
• Easy slug ejection or removal
• Ability to pre-drill pilot holes
and then attach cutter
• Heavy-duty carbide tipped
hole cutters stay sharp longer
than high-speed steel or
bi-metal cutters
• Multiple teeth reduce load less cutting force required
Threaded
Rod
For material up to 3/16” thick. Heavy-duty carbide teeth cut
fine holes in stainless steel or structural steels studs. Improve
production in brass, aluminum and other thin sheet materials.
Cutter only, arbor sold separately. Use arbor number 49-57-0035.
P/N
Diameter
Pipe
Hangers
49-57-8305
49-57-8309
49-57-8311
49-57-8315
49-57-8317
49-57-8323
49-57-8325
49-57-8329
3/4"
7/8"
1"
1-1/8"
1-7/32"
1-3/8"
1-7/16"
1-3/4"
Quick Change Steel Plate Carbide Tooth Hole Saws
For material up to 1/2” thick. Excellent for
hand held applications in 1/4” or 3/8” material (use arbor number 49-57-0035). For
thick material up to 1/2”, use a drill press and
arbor number 49-57-0037. Cutter only, arbor
sold separately,
Cutter only, arbor sold separately. Use arbor
number 49-57-0037.
Diameter
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
P/N
49-57-8201
49-57-8203
49-57-8205
49-57-8207
49-57-8209
49-57-8211
49-57-8213
P/N
Diameter
Steel Plate Carbide Hole Cutters
Consists of 11/16”, 13/16”,
15/16”, 1-1/8", 1-3/8", 2" pilot
and arbor. Includes plastic
carrying case
Tools
CT7 5-Pc. Carbide
Tipped Hole Cutter Set
Abrasives
7-piece Contractors’ Kit
49-22-8210
• For cutting holes up to 1" thick
in a cast iron, steels, aluminum, & non-ferrous materials.
• Designed for steel fabricators,
welders, plumbers, & mechanics.
• Features "triple-edge" teeth
and ejector spring for fast
hole cutting & slug ejection.
• Contains 7/8", 1-1/8", 1-3/8,
1-3/4" & 2" Hole Cutters
Consists of 7/8", 1-1/8", 1-3/8",
1-3/4", 2" pilot and arbor.
Includes plastic carrying case
Quick Change Arbor System
OnSite
Supply
49-57-0037
49-52-1052
Part No.
Safety
49-57-0035
Pilot Bits
Part No.
Size
Rentals
49-57-0038
302
1/4" x 2-3/7"
49-57-8215
49-57-8217
49-57-8219
49-57-8221
49-57-8223
49-57-8225
49-57-8227
7-piece Electricians’ Kit
49-22-8310
Consists of 7/8", 1-1/8", 1-3/8",
pilot and arbor. Includes
plastic carrying case
Arbors for Drill Presses
Part No.
Shank Incl.
1-1/8"
1-3/16"
1-1/14"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
Consists of 11/16", 13/16",
15/16", pilot and arbor.
Includes plastic carrying case
5-piece Contractors' Kit
49-22-8200
Arbor
P/N
5-piece Electricians’ Kit
49-22-8300
49-57-8331
49-57-8333
49-57-8335
49-57-8337
49-57-8339
49-57-8341
49-57-8343
2"
2-1/8"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
3"
Diameter
Part No.
Description
CT7-SET-3
5-pc. Set
One-Piece Steel Hog Cutters
49-57-0037 1/2" Center
pin & detachable
drill cap
42-52-1052 Drill Cap
40-52-8780 Ejector Spring
• Two sizes with 1/2" cutting depth: 11/16" & 13/16".
• Recommended for use Milwaukee Electromagnetic
drill presses or hand drill.
**Drill cap is for drilling a
pilot hole ID used in a hand
held application.
49-57-8068
49-57-8081
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
Diameter
11/16"
13/16"
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Vari-Bit™ Step Drill Bits
Vari-Bit™ Step Drill Bits
• Accurate, Burr-Free Holes
Patented two-flute design cuts fast, clean, round holes.
Unibit
P/N
KLEIN
Unibit P/N
30081-VB1
13
1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
3/8, 13/32, 7/16, 15/32, 1/2
1/4"
& larger
1
1-59001
30882-VB2
9
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1
3/8"
& larger
20
2-59002
30883-VB3
9
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4
3/8"
& larger
3
3-59003
30884-VB4
6
3/16, 1/4, 5/16, 3/8, 7/16, 1/2
3/8"
& larger
2
5-59005
30886-VB6
2
3/8, 1/2
3/8"
& larger
10, 12
7-59007
30887-VB7
1
7/8 / 22 (for 1/2”, 12.5 Conduit)
3/8"
& larger
11
8-59008
30908-VB8
12
3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,
11/16, 3/4, 13/16, 7/8
3/8"
& larger
4
14-59014
30909-VB9
3
7/8, 1-1/8, 1-7/32
3/8"
& larger
11,
13, 14
59011
30888-VB11
2
7/8, 1-1/8 (for 1/2” and 3/4” conduit)
3/8"
& larger
13
11-590011
30912-VB12
5
7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8
(for 1/2” and 3/4” conduit)
3/8"
& larger
None
None
Extension 8”. Fits 3/8” Drill chuck and larger
3/8"
& larger
Philadelphia, PA
610-647-8070
30929 - 4 Piece Kit
Includes: VB1, VB2 and VB3.
Includes: VB1, VB3, VB8 and VB12
30926 - 4 Piece Kit
30927 - 6 Piece Kit
Includes: VB1, VB2, VB7 and VB8
Includes: VB1, VB2, VB6, VB7, VB8 and VB12
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
30889 - 3 Piece Kit
303
Rentals
30925-VBX8
Threaded
Rod
Chuck
Size
Pipe
Hangers
Hole Sizes
(Inches)
Tools
No. of
Holes
OnSite
Supply
Lenox
Vari-Bit P/N
Abrasives
• Long Tool Life
Steam oxide coating adds durability
Enhanced flute design removes chips rapidly
Use of PROTOOL LUBE® recommended to extend tool life
Strut
• Starts on Contact
Split point design for faster penetration and less walking
Fasteners
Hole saws Kits
Ice Hardened™ Hole Saw Kits
Anchors
10-Pc Plumber's Kit
49-22-4145
10-Pc Electrician's Kit
49-22-4095
One each hole saws 3/4", 7/8", 1-3/8", 1-3/4",
2", 2-1/2". One each arbors 49-56-7010,
49-56-9100. (2) spare pilot drills 49-568010. One arbor adapter 49-56-6560.
Spacer 49-67-0120. Plastic case.
Strut
19-Pc Master Electrician's Kit
49-22-4105
Threaded
Rod
One each hole saws 3/4", 7/8", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2",
2-5/8", 3", 3-5/8", 4-1/8", 4-3/4". One
each arbors 49-56-7010, 49-56-9100.
(3) spare pilot drills 49-56-8010. One
arbor adapter 49-56-6560. Spacer
49-67-0120. Plastic case.
One each hole saws 3/4", 7/8", 1-1/8", 1-1/2",
1-3/4", 2-1/4". One each arbors 49-56-7010,
49-56-9100. (2) spare pilot drills 49-568010. One arbor adapter 49-56-6560.
Spacer 49-67-0120. Plastic case.
18-Pc Master Plumber's Kit
49-22-4155
One each hole saws 3/4", 7/8", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2-1/4", 2-5/8",
3", 3-1/2", 4", 4-1/4", 4-1/2". One each
arbors 49-56-7010, 49-56-9100. (3)
spare pilot drills 49-56-8010. One
arbor adapter 49-56-6560. Spacer
49-67-0120. Plastic case.
Bi-Metal Hole Saw Kits
Pipe
Hangers
Electrician No. 30821-600L
Six sizes most commonly used for pipe
tab and entrance. One each hole saws
3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4".
One each arbors 2L, 4L. One spare pilot
drill. One arbor adapter. Plastic case.
Plumber No. 30808-600P
Six sizes most commonly used for pipe
tab and entrance. One each hole saws
3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4".
One each arbors 2L, 4L. One spare pilot
drill. One arbor adapter. Plastic case.
Big Daddy 2000G
Tools
Electrician No. 30802-1200L
Abrasives
Twelve sizes needed to bring pipe and
conduit through floors, ceilings, partitions
and into junction boxes. One each hole
saws 3/4", 7/8", 1-1/8", 1-3/8", 1-3/4",
1-3/4", 2", 2-1/2", 2-11/16", 3", 3-5/8",
4-1/8", 4-3/4. Arbors: 2L, 5L. Two 4321
and one 56PD pilot drills. Plastic case.
Twenty sizes handle just about all
installation, maintenance and repair jobs.
One each hole saws 3/4", 7/8", 1", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2", 2-1/8". 2-1/4",
2-1/2", 2-11/16", 3", 3-1/4", 3-3/8", 3-5/8",
3-3/4", 4-1/8", 4-1/2", 4-3/4". Arbors: 1L,
2L and 5L. Two 4321 pilot drills and one
56D pilot drill. Plastic case.
Carbide-Tipped Hole Saw Kits
OnSite
Supply
Safety
15-pc. General Purpose Kit
No. 302901-100CTG
Rentals
15 sizes most commonly used. One each
hole saws: 3/4", 7/8", 1-1/8", 1-1/4",
1-3/8", 1-1/2", 1-3/4", 2", 2-9/16", 3".
One each arbors 1L, 2L. (2) - 123CT pilot
drills. Plastic case.
304
9-pc. Plumber's Kit
No. 30294-600CTG
9-pc. Electrician's Kit
No. 30295-600CTG
9 sizes most commonly used. One each
hole saws: 3/4", 7/8", 1-1/8", 1-1/2",
1-3/4", 2-1/4". One each arbors 1L, 2L.
(1) - 123CT pilot drills. Plastic case.
9 sizes most commonly used. One each
hole saws: 7/8", 1-1/8", 1-3/8", 1-3/4",
2-1/4". One each arbors 1L, 2L. (1) 123CT pilot drills. Plastic case.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1-7/8"
126342
AVXTL32
2"
126359
AVXTL33
2-1/16"
126366
AVXTL34
2-1/8"
126380
AVXTL36
2-1/4"
126397
AVXTL37
2-5/16"
126403
AVXTL38
2-3/8"
2-9/16"
AVXTL42
2-5/8"
5/8"
1/4"
126472
AVXTL44
2-3/4"
11/16"
3/8"
126489
AVXTL46
2-7/8"
126045
AVXTL12
3/4"
1/2"
126502
AVXTL48
3"
126069
AVXTL13
13/16"
1/2"
126519
AVXTL50
3-1/8"
5/8"
126526
AVXTL52
3-1/4"
126533
AVXTL54
3-3/8"
126540
AVXTL56
3-1/2"
126557
AVXTL58
3-5/8"
126564
AVXTL60
3-3/4"
126571
AVXTL62
3-7/8"
126595
AVXTL64
4"
AVXTL15
15/16"
126106
AVXTL16
1"
123113
AVXTL17
1-1/16"
126120
AVXTL18
1-1/8"
126144
AVXTL19
1-3/16"
1/2"
3//4"
1"
3/4"
3/4"
AVXTL20 - AVXTL38 Use 5/8-18 Arbors:
M35PS, M45, M45P, M46PS, M55P or M44K
126601
AVXTL66
4-1/8"
126618
AVXTL68
4-1/4"
126625
AVXTL70
4-3/8"
126632
AVXTL72
4-1/2"
126649
AVXTL76
4-3/4"
126656
AVXTL80
5"
1-9/16"
126663
AVXTL88
5-1/2"
1-5/8"
126687
AVXTL96
6"
1-1/2"
126250
AVXTL25
126274
AVXTL26
1-1/4"
Part No.
Shank
Thread
Chuck
M24K
1/4 Round
1/2-20
1/4
M24
1/4 Hex
1/2-20
1/4
M34
3/8 Hex
1/2-20
3/8
M44
7/16 Hex
1/2-20
1/2
M44K
7/16 Hex
1/2-20
1/2
M45
7/16 Hex
5/8-18
1/2
M45P
7/16 Hex
5/8-18
1/2
M46PS
7/16 Hex
5/8-18
1/2
M55P
5/8 Hex
5/8-18
3/4
M35PS
3/8 Hex
5/8-18
3/8
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Fits Saws
9/16"
through
1-3/16"
9/16" – 6"
Strut
3"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
4"
4"
4"
4"
4-1/2"
5"
Arbors
These heavy-duty, carbon steel arbors come complete with pilot
drills. They adapt Morse Hole Saws to any power drill used by
professionals.
Safety
AVXTL24
44
126236
1-1/4"
M
1-7/16"
K
AVXTL23
44
126229
1"
M
1-3/8"
34
1-5/16"
AVXTL22
M
AVXTL21
126199
24
126182
1"
M
1-1/4"
24
K
AVXTL20
M
126151
3"
1-1/2"
through
6"
1-1/4" – 2-3/8"
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
305
Rentals
126083
3/4"
55
P
7/8"
2-1/2"
Threaded
Rod
AVXTL41
126441
2"
Pipe
Hangers
126434
2"
Tools
2-1/2"
AVXTL10
AVXTL14
2"
Abrasives
AVXTL40
AVXTL11
126076
2"
OnSite
Supply
126427
126014
3/8"
1-1/2"
AVXTL40 - AVXTL96 Use 5/8-18 Arbors:
M45P, M46PS, M55P or M44K
126038
1/2"
1-1/2"
Fasteners
1-13/16"
AVXTL30
1-1/2"
M
1/8"
AVXTL29
126328
1-1/4"
PS
9/16"
126311
1-1/2"
46
AVXTL09
1-3/4"
M
126007
AVXTL28
45
P
AVXTL09 - AVXTL19 Use 1/2-20 Arbors:
M24, M24K, M34, M44 or M44K
126298
M
Diameter
For
Copper
Pipe I.D.
1-11/16"
For
Copper
Pipe I.D.
45
Part No.
Pipe
Entrance
Size
126281
Pipe
Entrance
Size
M
Order
No.
Pipe
Tap
Size
Diameter
Pipe
Tap
Size
35
PS
This premium line of professional
quality hole saws features an M3
high-speed steel cutting edge,
electron beam welded to a tough
steel backer. Caps stand up to abuse
and punishment, yet are lighter and
easier to use. Positive rake tooth
design provides better chip clearance
as teeth cut into wood, plastic or any
machinable metal. The 1-1/2" cutting
depth cuts easily through 2x4's. A
separate arbor is required
Part No.
AVXTL27
M
CobaltXTL Bi-Metal Hole Saws
Order
No.
Anchors
Bi-Metal Hole saws
49-56-0087
1-9/16"
Ice Hardened Bi-Metal
Hole Saws
49-56-0092
1-5/8"
49-56-0097
1-11/16"
• Ice Hardened for up to
50% longer life than the
competition
Proprietary cryogenic hardening process that is more
consistently harder than
heat-treating.
49-56-0102
1-3/4"
49-56-0107
1-13/16"
49-56-0112
1-7/8"
49-56-0117
2"
2-1/16"
49-56-0127
2-1/8"
• Cuts Faster
Unique precision-ground tooth geometry and positive rake angle
cuts more aggressively.
49-56-0132
2-1/4"
49-56-0137
2-5/16"
49-56-0142
2-3/8"
49-56-0147
2-1/2"
49-56-0153
2-9/16"
49-56-0158
2-5/8"
49-56-0163
2-3/4"
49-56-0167
2-7/8"
49-56-0173
3"
49-56-0177
3-1/8"
Order No.
Pipe
Tap
Size
Diameter
Pipe
Entrance
Size
For
Copper
Pipe I.D.
5/8"
1/4"
49-56-0017
11/16"
3/8"
49-56-0023
3/4"
49-56-0027
13/16"
49-56-0032
7/8"
49-56-0037
15/16"
49-56-0043
1"
49-56-0047
1-1/16"
49-56-0052
1-1/8"
49-56-0057
1-3/16"
1/2"
3/8"
1/2"
3/4"
1/2"
5/8"
1/2"
3//4"
1"
3/4"
3/4"
49-56-0183
3-1/4"
49-56-0187
3-3/8"
49-56-0193
3-1/2"
49-56-0197
3-5/8"
49-56-0203
3-3/4"
49-56-0207
3-7/8"
49-56-0213
4"
49-56-0217
4-1/8"
49-56-0223
4-1/4"
49-56-0227
4-3/8"
49-56-0233
4-1/2"
49-56-0067
1-5/16"
49-56-0237
4-3/4"
49-56-0072
1-3/8"
49-56-0243
5"
49-56-0077
1-7/16"
49-56-0247
5-1/2"
49-56-0082
1-1/2"
49-56-0253
6"
1"
1-1/4"
Rentals
Hartford, CT
800-969-0285
50
-5
6
-7
1
0
Safety
306
49
56
-7
14
49
-
55
1-1/4"
-7
0
49
-5
6-
69
50
OnSite
Supply
1-1/4"
49
-5
6-
1"
Pipe
Entrance
Size
For
Copper
Pipe I.D.
1-1/2"
1-1/4"
1-1/2"
1-1/2"
2"
2"
2"
3"
3"
3-1/2"
3-1/2"
4"
3-1/2"
4"
4"
4"
4-1/2"
5"
Part No.
Shank
Thread
Chuck
49-56-6950
1/4 Round
1/2-20
1/4
49-56-6960
1/4 3-Flats
1/2-20
1/4
49-56-7000
7/16 Hex
1/2-20
1/2
49-56-7010
3/8 Hex
1/2-20
3/8
49-56-7055
7/16 Hex
5/8-18
1/2
49-56-7140
7/16 Hex
5/8-18
1/2
49-56-4150
7/16 Hex
5/8-18
1/2
49-56-7150
3/8 Hex
5/8-18
3/8
Boston , MA
800-645-6155
2"
2-1/2"
49-56-0062
-5
6
Abrasives
0062 - 0253 Use Arbors: 49-56-7055, 49-56-7140,
49-56-7150, 49-56-9100
49
-5
Tools
49-56-0012
69
60
Pipe
Hangers
0012 - 0057: Use Arbors: 49-56-6950, 49-56-6960,
49-56-7000, 49-56-7010
70
10
Threaded
Rod
49-56-0122
• Optimum Life
Radiused back face reduces stress on the teeth.
Pipe
Tap
Size
1-1/2"
• Matrix II Bi-Metal Construction
Greater durability
49
Strut
Diameter
49
-5
6-
Anchors
Order No.
670
00
Fasteners
Bi-metal Hole saws
Washington D.C.
877-419-2755
Fits Saws
9/16"
through
1-3/16"
1-1/4"
through
6"
Philadelphia, PA
610-647-8070
Part No.
Diameter
Pipe
Entrance
Size
For
Copper
Pipe I.D.
9L
9/16"
27L
1-11/16"
30028
28L
1-3/4"
30029
29L
1-13/16"
30030
30L
1-7/8"
30032
32L
2"
30033
33L
2-1/16"
30034
34L
2-1/8"
30036
36L
2-1/4"
30038
38L
2-3/8"
40L
2-1/2"
30041
41L
2-9/16"
30042
42L
2-5/8"
1/8"
30044
44L
2-3/4"
46L
2-7/8"
30010
10L
5/8"
1/4"
30011
11L
11/16"
3/8"
30048
48L
3"
30012
12L
3/4"
1/2"
30050
50L
3-1/8"
1/2"
30052
52L
3-1/4"
5/8"
30054
54L
3-3/8"
30056
56L
3-1/2"
30058
58L
3-5/8"
30060
60L
3-3/4"
60064
64L
4"
60066
66L
4-1/8"
60068
68L
4-1/4"
30072
72L
4-1/2"
30076
76L
4-3/4"
30080
80L
5"
30088
88L
5-1/2"
30096
96L
6"
13L
13/16"
30014
14L
7/8"
30015
15L
15/16"
30016
16L
1"
30017
17L
1-1/16"
30018
18L
1-1/8"
19L
30019
3/4"
1/2"
3//4"
1"
3/4"
3/4"
1-3/16"
20L - 96L Use 5/8-18 Arbors: 2L or 6L
30020
20L
1-1/4"
30021
21L
1-5/16"
30022
22L
1-3/8"
30023
23L
1-7/16"
30024
24L
1-1/2"
1"
1"
1-1/4"
1-1/4"
Hole Saw Accessories
55X
10X
12X
18X
Order
No.
Description
Chuck
Size
Fits
Arbor
30850
4321
Pilot Drill, 1/Pack
1/4"
1L, 2L, 4L
30851
56PD
Pilot Drill, 1/Pack
1/4"
5L, 6L
30846
55X
5-1/2" Extension, 1/Pack
1/2"
1L, 2L
30843
10X
10" Extension, 1/Pack
3/8"
5L, 6L
30847
12X
12" Extension, 1/Pack
1/2"
1L, 2L
30848
18X
18" Extension, 1/Pack
1/2"
1L, 2L
30857
AA1
Arbor Adapter, 5/Pack
—
1L, 4L, 5L
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
1-1/2"
Strut
2"
2"
2"
2"
2-1/2"
3"
3"
3-1/2"
3-1/2"
3-1/2"
4"
4"
4"
4"
4-1/2"
5"
Hole Saw
Arbors
56PD
4321
Part
No.
1-1/2"
All Hole Saws
9/16" to 3/4"
are available in
master packs
of 10.
All Hole Saws
1-13/16" to
3-1/2"
are available in
master packs
of 5.
Boston , MA
800-645-6155
OnSite
Supply
30013
3/8"
1-1/4"
1-1/2"
30046
1/2"
1-1/2"
Fasteners
30027
30040
9L - 19L Use 1/2-20 Arbors: 1L, 4L or 5L
30009
1-5/8"
Threaded
Rod
Order
No.
Pipe
Tap
Size
26L
Pipe
Hangers
• Withstands High Torque
Thick backing plate with holes for drive pins resists damage
due to high torque
30026
Tools
• Stays Sharp
High speed steel teeth resist
breaking for extended life
1-9/16"
For
Copper
Pipe I.D.
Abrasives
• Long Lasting
Patented VARI-TOOTH®
design resists tooth strippage
Diameter
25L
Pipe
Entrance
Size
1L
2L
4L
5L
Part No.
Shank
Chuck
1L
Hex
1/2
4L
Round
1/4
5L
Hex
3/8
2L
Hex
1/2
6L
Hex
3/8
Hartford, CT
800-969-0285
6L
Fits Saws
9L - 19L
Safety
• Durable
TUFF TOOTH™ design is
reinforced to cut stronger
and last longer.
Part No.
30025
Pipe
Tap
Size
20L - 96L
307
Rentals
Bi-Metal Hole Saws
Order
No.
Anchors
Bi-Metal Hole saws
Fasteners
Bi-MetaL / Carbide-Tipped Hole saws
Anchors
Carbide Tipped
Hole Saws
Bi-Metal Hole Saws
with Arbors
Designed To Cut
Abrasive Materials
• Durable
TUFF TOOTH™ design is reinforced to cut stronger and last
longer.
• Long Tool Life
Heat resistant carbide teeth
for long life in tile and stain-
less steel.
• Long Lasting
Patented VARI-TOOTH® design
resists tooth strippage
Strut
• Added Durability
Thick backing plate resists
damage and increases life.
• Stays Sharp
High speed steel teeth resist
breaking for extended life
• Unique Tooth Configuration
Engineered design cuts in
stainless steel like no other.
Threaded
Rod
• Withstands High Torque
Thick backing plate with holes for
drive pins resists damage due to
high torque
Order
No.
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
Part No.
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Part No.
Diameter
34009
9A
9/16"
1/8"
34010
10A
5/8"
1/4"
34011
11A
11/16"
3/8"
34012
12A
3/4"
34013
13A
13/16"
34014
14A
7/8"
34015
15A
15/16"
34016
16A
1"
34017
17A
1-1/16"
34018
18A
1-1/8"
34019
19A
1-3/16"
34020
20A
1-1/4"
34021
21A
1-5/16"
34022
22A
1-3/8"
34023
23A
1-7/16"
34024
24A
1-1/2"
34025
25A
1-9/16"
34026
26A
1-5/8"
34027
27A
1-11/16"
34028
28A
1-3/4"
34029
29A
1-13/16"
34030
30A
1-7/8"
34032
32A
2"
34033
33A
2-1/16"
34034
34A
2-1/8"
34036
36A
2-1/4"
34037
37A
2-5/16"
34038
38A
2-3/8"
34040
40A
2-1/2"
30297
123CT
Rentals
308
3/8"
1/2"
1/2"
3/4"
1/2"
5/8"
3//4"
1"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"
Hartford, CT
800-969-0285
2"
Pipe
Entrance
Size
For
Copper
Pipe I.D.
1/2"
9CT - 18CT Use 1/2-20 Arbors: 1L or 4L
Order
No.
1/2"
Diameter
Pipe
Tap
Size
30212
12CT
3/4"
1/2"
3/8"
3/4"
1/2"
30214
14CT
7/8"
30216
16CT
1"
30218
18CT
1-1/8"
5/8"
3//4"
1"
3/4"
3/4"
20CT - 96CT Use 5/8-18 Arbors: 2L
30220
20CT
1-1/4"
30222
22CT
1-3/8"
30224
24CT
1-1/2"
30226
26CT
1-5/8"
30228
28CT
1-3/4"
30232
32CT
2"
30234
34CT
2-1/8"
30236
36CT
2-1/4"
30238
38CT
2-3/8"
30240
40CT
2-1/2"
30242
42CT
2-5/8"
30248
48CT
3"
30252
52CT
3-1/4"
30254
54CT
3-3/8"
30256
56CT
3-1/2"
30258
58CT
3-5/8"
30260
60CT
3-3/4"
30264
64CT
4"
30266
66CT
4-1/8"
30268
68CT
4-1/4"
30272
72CT
4-1/2"
30276
76CT
4-3/4"
30280
80CT
5"
30288
88CT
5-1/2"
30296
96CT
6"
Boston , MA
800-645-6155
1"
1"
1-1/4"
1-1/2"
1-1/4"
1-1/2"
1-1/2"
2"
2"
2"
2"
2-1/2"
3"
3"
3-1/2"
3-1/2"
4"
3-1/2"
4"
4"
4"
4-1/2"
5"
1/4" Carbide-Tipped Pilot Drill
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Bi-Metal Utility Bits
Nail Eater® Extreme Power Bits
• Resharpenable
Resharpen with LENOX® Diamond file product no. 25312
10948
3/4"
1/4"
7/8"
10949
Bi-Metal
Utility Bit
10950
1"
10951
1-1/8"
10952
1-1/4"
10953
1-3/8"
61 PTS Shorty, 62 PTS and 61/62 PTS Big Shank
Shorty Nail Eater II® Bits
3/8"
Part
No.
Hole
Dia.
Dia.
7/8"
1-1/8"
1-1/4"
1-1/2"
Part No
3/4"
61PTS-3/4
48-13-6552
48-13-6554
48-13-6555
48-13-6557
13/16"
61PTS-13/16
5/8"
62PTS-5/8
11/16"
62PTS-11/16
13/16"
62PTS-13/16
7/8"
62PTS-7/8
62PTS-1
Used with 7/16" Quick‑Change Shank.
61/62PTS-1-1/8
1-1/8
Part No.
Shank
61/62PTS-1-1/4
1-1/4"
48-03-0006
48-03-0007
48-03-0008
1/2”
1/2” -20
5/8”-16
66PT-5/8
7/16” Hex Shank Extensions w/ Quick Change Shank
66PT-11/16
66PT-3/4
For selfeed bits, auger bits and hole saws (1” dia. and larger)
with 7/16” hex shank. Fits 3-Jaw or Quick-Change chucks
66PT-13/16
Part No.
66PT-15/16
48-28-4001
48-28-4006
48-28-4011
48-28-4016
49-96-0060
Philadelphia, PA
610-647-8070
Length
Repl. Set Screw
5-1/2"
12"
18"
24"
Repl. 1/8" Socket
06-83-2711
06-86-2711
06-86-2711
06-86-2711
Wrench
Washington D.C.
877-419-2755
66PT-7/8
66PT-1
1/2"
15"
5/16"
5/8"
11/16"
3/4"
13/16"
7/8"
7/16"
15/16"
1"
66PT-1-1/8
1-1/8"
66PT-1-1/4
1-1/4"
Boston , MA
800-645-6155
18"
7/16"
1"
66PT-1/2
5"
3/4"
62PTS-3/4
7/16” Quick Change Chucks
7-5/8"
1"
61PTS-1
3/8"
1/2"
3/4"
1"
15/16"
7/8"
61PTS-7/8
For Std. Pipe Sizes
Twist
Length
11/16"
61PTS-11/16
All 4” twist and 6-1/2” long, 7/16” hex shank. Feed
screw pilot draws bit into wood. Sharp cutting spurs and
lips can be quickly resharpened.
Overall
Length
5/8"
61PTS-5/8
Quick Change Auger Bits
Hex
Shank
Tools
5/8"
Abrasives
10947
Shank
OnSite
Supply
Hole
Diameter
Description
Safety
Part
No.
• Patented new designed for improved cutting and cleaner holes.
• Self-feeding screw point draws bit through wood.
• Made of super tough heat treated steel; cuts through nails and
provides longer life
• "Shorty" bits - for working in tight places, yet still can go through three
abutting 2 x 4’s.
• 61 PTS Shorty Nail Eater II®, 62 PTS and 61/62 Big Shank Shorty
Nail Eater II® Bits: Overall Length: 7-5/8"; Twist Length: 5" Electric drill required: 61 PTS - 5/8" through 61 PTS - 1" minimum
3/8" drill; All Big Shank, 1/2" drill.
• 66 PTS Nail Eater II® Overall Length: 18" - Twist Length: 15".
Hartford, CT
800-969-0285
309
Rentals
• Fast Clean Cutting
3 cutting edges enhance chip
removal for a fast, clean hole.
Threaded
Rod
• Optimized for Cordless Drilling
Smooth, effortless drilling
extends battery life
Pipe
Hangers
• Extreme Durability
High speed steel cutting edges
provide long life in tough
applications, including nailembedded wood
Strut
Anchors
Tougher than Nails
Fasteners
Augers / Utility Bits
Fasteners
D'Versibit
D'Versibit™ System
Anchors
The D'Versibit System makes it possible to easily accomplish even complex installations. Flexible
steel bits are the right tools for installing wire or cable inside existing walls. Simply bow the spring
shaft in the direction you want to drill. When used with the placement tool this flexibility makes it
possible to easily manipulate the bit within the walls. After drilling, attach a D'VersiGrip to the drill
and pull wire or cable back through the wall.
Strut
Threaded
Rod
Bit Diameter
Color Code
Shaft
Length
—
1412D
—
—
—
—
—
1418D
—
—
—
—
3/16"
Pipe
Hangers
—
1424D
—
—
04-03-24C
—
36"
—
—
—
—
04-03-36C
3XT 36
54"
—
—
—
—
04-03-54C
—
5/32"
Tools
—
—
—
—
04-03-72C
—
12"
—
3812D
—
—
—
—
24"
—
3824D
—
—
—
—
36"
—
3836D
06-03-36A
06-03-36B
06-03-36C
3XT 36
54"
069-03-54M
3858D
06-03-54A
06-03-54B
06-03-54C
3XT 54
72"
Abrasives
1/2"
Green
3/16"
—
3872D
06-03-72A
06-03-72B
06-03-72C
3XT 72
36"
—
1236D
08-03-36A
08-03-36B
08-03-36C
3XT 36
54"
—
1258D
08-03-54A
08-03-54B
08-03-54C
3XT 54
3XT 72
72"
54"
1/4"
—
1272D
08-03-72A
08-03-72B
08-03-72C
08-504-54M
—
—
—
—
—
—
09-03-36A
09-03-36B
—
3XT 36
36"
9/16"
Orange
OnSite
Supply
3/4"
Red
54"
3/16"
—
—
09-03-54A
09-03-54B
09-03-54C
3XT 54
72"
—
—
09-03-72A
09-03-72B
09-03-72C
3XT 72
36"
—
—
12-04-36A
—
—
4XT 36
54"
—
—
12-04-54A
—
12-04-54C
4XT 54
—
—
12-04-72A
—
12-04-72C
4XT 72
72"
36"
1"
Red
Type A
Auger
Part No.
12"
72"
3/8"
Black
Type HS
Wood
Part No.
1/4"
—
—
16-04-36A
—
—
4XT 36
54"
—
—
16-04-54A
—
—
4XT 54
72"
—
—
16-04-72A
—
—
4XT 72
Safety
D'VersaGrip
• Clip attaches to hole in bit, mesh basket
holds wire or cable during recovery,
swivel reduces twisting.
• For use with bit 3/8" diameter or larger.
Rentals
310
Extension
(Choose
Type C
by Shaft
Combination
Diameter
Part No.
and Length)
18"
24"
1/4"
Blue
Type M
Masonry
Part No.
Shaft
Diameter
Type B
Combo
w/ Screw
Point
Part No.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
For Pulling Wire:
38691 125
38692 150
38693 168
Single Wire w/ 3/8" - 1/2"
bits
1/2" Wire w/ 1/2" - 9/16"
bits
3/4" Wire w/ 3/4" - 1""
bits
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Large Selfeed Bits -
3" – 4-5/8"
Double inside cutter blades
that shave hole radius for
clean, smooth holes without
pressure. Replaceable arbor.
Hole
Diameter
48-25-1001
1"
1/2"
Shank Type
48-25-1121
1-1/8"
3/4"
1-1/4"
—
48-25-1371
1-3/8"
Selfeed Bit Kits
1"
7/16" Quick
Change Shank
1"
4-Bit Contractors Kit
2"
—
48-25-2121
2-1/8"{
—
Part No.
Description
48-25-2251
2-1/4"
2"
49-22-0135
4-Bit Contractor's Kit
48-25-2561
2-9/16"
—
48-25-3001
3"
2-1/2"
48-25-3621
3-5/8"
48-25-4125
4-1/8"
48-25-4621
4-5/8"
3-Milled Flats
3"
3"
4"
Accessory Kits - Selfeed Bits - 1" to 2-9/16"
7-Bit Contractors Kit
Sizes include 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4"
2-1/8", 2-9/16" diameters. Also 5-1/2" one piece shank and coupling - extension and carrying case.
48-25-6000
Incl. 5 selfeed screws, 3 set screws & hex wrench
Part No.
Description
48-28-6870
Feed Screw - Coarse thread - 1/4"
49-22-0130
7-Bit Contractor's Kit
49-96-0060
Socket Wrench - 1/8"
06-83-2625
Set Screw
Accessory Kits - Large Selfeed Bits - 3" to 4-5/8"
Pipe
Hangers
48-25-2001
Sizes include1-3/8", 1-1/2", 2-1/8", 2-9/16"
diameters. Also 5-1/2" one piece - shank and
coupling - extension and carrying case.
1-1/2"
Tools
1-3/4"
• Compatible with 7/16" Quick-Change Chucks and Extensions
7-Bit Plumbers Kit
48-25-7000
Incl. 3 selfeed screws, 3 set screws & hex wrench
48-07-0201
Replaceable Arbor
48-28-6880
Feed Screw Regular THread, 3/8"
49-96-0070
Socket Wrench, 5/32"
Part No.
Description
06-83-3150
Set Screw
49-22-0065
7-Bit Plumbers’ Kit
Abrasives
48-25-1751
• Replaceable Feed Screw
Fast, effortless feeding even in gummy woods. (2) provided
with each bit
For Std.
Pipe Size
48-25-1251
1-1/2"
• Resharpenable
Using a standard file.
OnSite
Supply
Sizes include 7/8", 1-1/8", 1-1/4", 1-1/2" auger
bits and selfeed bits in 1-3/4", 2-1/8", 2-9/16"
diameters. Also 5-1/2" one piece - shank and
coupling - extension and carrying case.
For selfeed bits, auger bits and hole saws (1” dia. and larger)
with 7/16” hex shank. Fits 3-Jaw or Quick-Change chucks
7/16” Quick Change Chucks
Part No.
Used with 7/16" Quick‑Change Shank.
48-28-4001
48-28-4006
48-28-4011
48-28-4016
49-96-0060
Philadelphia, PA
610-647-8070
Repl. Set Screw
5-1/2"
12"
18"
24"
Repl. 1/8" Socket
06-83-2711
06-86-2711
06-86-2711
06-86-2711
Wrench
Washington D.C.
877-419-2755
Part No.
Shank
48-03-0006
48-03-0007
48-03-0008
1/2”
1/2” -20
5/8”-16
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
7/16” Hex Shank Extensions w/ Quick Change Shank
Length
Strut
Part No.
48-25-1501
• Hard and Tough
Heat-treated steel alloy for maximum toughness and wear
resistance
Threaded
Rod
Inside cutting plane shaves hole
radius for clean, smooth holes
without pressure.
311
Rentals
Selfeed Bits
• Fast and Aggressive
For Balanced and smooth drilling.
Fasteners
Selfeed Bits
Anchors
SelFeed Bits
Fasteners
Selfeed Bits / Hole Cutters
One Tooth® Rough Wood Hole Cutter
Anchors
Switchblade™
Selfeed Bits
Drills Faster than Selfeed Bits
Strut
• Long Lasting
High speed steel tooth provides long
tool life.
• Cuts Fast / Low Torque
Designed to run at high speeds with
very little torque.
• Durable Wood Cutting Tool
• Easy Plug Removal
• Cuts At An Angle
• Uses Standard Arbor
For optimal performance, use with a
LENOX 2L Arbor and a 3/8” Stubby
Spade Bit.
• Aggressive Feed
Screw Design
Pulls bit through the
wood faster.
• No Resharpening Needed
Hardened Steel replacement blades allow Switchblade™
Selfeed bits to cut like new
• Available in the sizes that Plumbers, HVAC Contractors and
Electricians use most frequently.
• Compatible with 7/16" Quick-Change Chucks and Extensions
(See page 311 for ordering information)
Threaded
Rod
Part No.
Hole
Diameter
3-Blade
Replacement
Kit
10-Blade
Replacement
Kit
Order
No.
Part No.
48-25-5120
1-3/8"
48-25-5220
48-25-5320
25433
24HC
1-3/8"
1" pipe & lock installation
34HC
2-1/8"
1-1/2" pipe & lock installation
1-1/2" pipe / 45°/90° couplings
Diameter
Application
Pipe
Hangers
48-25-5125
1-1/2"
48-25-5225
48-25-5325
25434
48-25-5135
2"
48-25-5235
48-25-5335
25436
36HC
2-1/4"
48-25-5140
2-1/8"
48-25-5240
48-25-5340
25441
41HC
2-9/16"
48-25-5350
25444
44HC
2-3/4"
2" pipe / 45°/90° couplings
25454
54HC
3-3/8"
3" duct pipe / bendable duct pipe
25456
56HC
3-5/8"
25464
64HC
4"
25469
69HC
4-5/16"
25474
74HC
4-5/8"
25480
80HC
5"
25487
87HC
5-1/2"
Toilet flange
25500
00HC
6-1/4"
6" duct pipe
25310
SB38
—
3/8" stubby spade bit
25312
DIAF1
—
Diamond file for resharpening
48-25-5150
48-25-5275
2-9/16"
48-25-5250
Replacement Feed Screw Kit
5-Pc Plumbers Kit
Tools
Includes: 4 Switchblade™ selfeed bits:
1-3/8", 1-1/2", 2-1/8", and 2-9/16"; 1
Universal Quik-Lok® extension: 5-1/2"
x 7/16", 1 ea. replacement blades:
1-3/8", 1-1/2", 2-1/8", and 2-9/16",
4 feed screws, 4 set screws, 1 hex
wrench; removable storage case;
carrying case.
Abrasives
Part No.
Description
49-22-5100
5-Pc. Plumber's Kit
2" pipe
3" pipe
3" pipe & coupling & dryer vent
4" duct pipe / bendable duct pipe
4" pipe
4" pipe & coupling
One Tooth® Rough Wood Hole Cutter Kits
BIGHAWG™ Hole Cutter Kit
7-Pc Kit - 25476-301G
OnSite
Supply
• Three hardened steel teeth provide up to
ten times faster cutting than hole saws.
One each ONE TOOTH® HOLE CUTTERS:
2-1/8", 2-9/16", 3-5/8". Arbor: 2L.
Diamond file. Two 3/8" stubby spade bits.
• Deep gullets for easy plug removal.
• Cuts up to 600 holes in wood without
needing to be re-sharpened.
Safety
Includes: (6) hole cutters: 2-1/8", 2-1/4",
2-9/16", 3", 3-5/8", 4-1/4", (1) arbor with
pilot bit, (2) pilot bits, (1) diamond file, (1)
hex wrench and impact resistant case
Rentals
312
Part No.
Description
49-56-9085
10-Pc. BIGHAWG™ Kit
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
11-Pc Kit - 25477-701G
One each ONE TOOTH® HOLE CUTTERS:
2-1/8", 2-1/4", 2-9/16", 2-3/4", 3-5/8", 4",
4-5/8". Arbor: 2L. Diamond file. Two
3/8" stubby spade bits.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Heavy Duty Metal Fastening Adjustable Clutch Screwdriver
Anchors
• Maximum fastening control/minimum reaction force
• Smooth action, 21 position adjustable clutch - Torque: 0 - 140 in-lbs.
• Self-locking, push-in quick change 1/4 in. hex chuck for fast accessory changes
• Powerful 6.5 amp motor for maximum driving power
• Balanced, lightweight tool with comfortable grip
Specifications
Volts:
Max. Amps:
No Load Speed:
Drive Size:
Part No.
120 V AC
6.5
0-2,500 rpm
1/4" Hex
Max HP:
Clutch:
Spindle Offset:
Weight:
6780-20
0.9
Adjustable
0.92 in.
3.8 lbs.
Strut
Fasteners
SCrew Guns / TEK Drivers
Description
6780-20 Metal Fastening Adjustable Clutch Screwdriver
Heavy Duty TEKS Screwdriver
Threaded
Rod
• Powerful 6.5 amp motor, 0 to 2500 rpm, variable speed control
• Ramp-off depth locator for easy depth adjustments
• All metal gear case and diaphragm
• 10 ft. 2-wire rubber cord
• Ergonomic tactile grip and two finger trigger for user comfort and balance
• Removable belt clip with bit storage, TEK locator Assembly, 5/16" Magnetic Hex
Socket.
Specifications
Volts:
Max. Amps:
No Load Speed:
Drive Size:
Part No.
120 V AC
6.5
0-2,500 rpm
1/4" Hex
Max HP:
Clutch:
Spindle Offset:
Weight:
6790-20
0.9
Snap-Action
0.92 in.
3.7 lbs.
Pipe
Hangers
Description
6790-20 TEKS Screwdriver
Tools
Adjustable Clutch Screwdriver
• Powerful 6.5 Amp Milwaukee Motor
• Multi Position Torque Sensitive Clutch - 10 - 140 in-lbs.
• 10 ft. 2-Wire Quik-Lok® cord
• All Metal Gear Case and Diaphragm
Volts:
120 V AC
Max. Amps:
6.5
No Load Speed:
0-1,500 rpm
Drive Size:
1/4" Hex
Part No.
Description
Max HP:
Clutch:
Spindle Offset:
Weight:
0.9
Adjustable
0.92 in.
3.6 lbs.
Abrasives
Specifications
6580-20
6580-20 Decking. Drywall & Framing Screwdriver
OnSite
Supply
Heavy Duty Decking, Drywall & Framing Screwdriver
• Powerful 6.5 amp motor, 0 to 2500 rpm, variable speed control
• Ramp-off depth locator for easy depth adjustments
• All metal gear case and diaphragm
• 10 ft. 2-wire rubber cord
• Ergonomic tactile grip and two finger trigger for user comfort and balance
• Removable belt clip with bit storage.
Specifications
Volts:
Max. Amps:
No Load Speed:
Drive Size:
Part No.
120 V AC
6.5
0-2,500 rpm
1/4" Hex
Max HP:
Clutch:
Spindle Offset:
Weight:
6740-20
0.9
Snap-Action
0.92 in.
3.7 lbs.
Safety
Description
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
313
Rentals
6740-20 Decking. Drywall & Framing Screwdriver
Fasteners
Screw Guns / TEK Drivers
Heavy Duty VSR Depth-Sensitive Screwdriver
Anchors
• Ideal for use with TEKS® screws.
• Helical-cut steel, heat-treated gears for long life and durability.
• Metal gear housing for increased durability.
• Depth-sensitive "set and forget" nosepiece for consistent fastener depth.
• Rubber grip and two-finger, rubber trigger for increased comfort.
Specifications
DW266
Volts:
Max. Amps:
No Load Speed:
Max Fastener Size:
Strut
Part No.
DW266
120 V AC
6.5
0-2,500 rpm
#14
Clutch:
Torque:
Weight:
Standard
132 in-lbs
3.5 lbs.
Description
VSR Depth Sensitive Screwdriver
Heavy Duty VSR Deck/Drywall Screwdriver
Threaded
Rod
• Helical-cut steel, heat treated gears for long life and durability
• High torque for deck building, drywall and heavy gauge steel stud framing
• Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
• Two-finger, rubber trigger
Specifications
ROOFERS
CHOICE
Pipe
Hangers
DW257
Volts:
Max. Amps:
No Load Speed:
Max Fastener Size:
Part No.
DW257
120 V AC
6.2
0-2,500 rpm
#12
Clutch:
Torque:
Weight:
Standard
132 in-lbs
3.7 lbs.
Description
VSR Deck/Drywall Screwdriver
Heavy Duty VSR Drywall Screwdriver
Tools
• Helical-cut steel, heat treated gears for long life and durability
• High torque for deck building, drywall and heavy gauge steel stud framing
• Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
• Two-finger, rubber trigger
Specifications
Abrasives
Volts:
Max. Amps:
No Load Speed:
Max Fastener Size:
Part No.
DW255
DW255
120 V AC
6.0
0-5,300 rpm
#8
Torque:
Clutch:
Torque:
Weight:
60 in.-lbs.
Standard
132 in-lbs
3.7 lbs.
Description
VSR Deck/Drywall Screwdriver
OnSite
Supply
21-Piece Screwdriving Set
Safety
ontains:
C
• 1" Phillips bit tips: (1) #1, (6) #2, (1) #3
• 1" Slotted bit tips: (1) #6, (1) #8, (1) #10
• 1" Square Recess bit tips: (1) #1, (3) #2, (1) #3
• 2" Phillips power bit (1)
• 2" Square Recess power bit: (1) #2
• Nutdrivers: (1) 1/4", (1) 5/16"
• 2" Magnetic bit tip holder (1)
Part No.
Description
DW2161 21-pc Screwdriving Set
Rentals
314
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Phillips Power Bit
Insert Bit Holders
1/4” Hex Shank Phillips Bits
Point
Size
0
1
1
2
2
2
2
3
Overall
Length
Part
No.
1
1
1
1
1
1-1/2
2
1
0N100PIB
1N100PIB
1N100PIB/LC
2N100PIB
2N100PIB/LC
2N150PIB
2N200PIB
3N100PIB
For ¼” Hex Insert Bits
Shank Size: Standard ¼”
Hex Drive
Point
Size
Overall
Length
Part
No.
1-15/16
2-3/4
3-1/2
1-15/16
2-3/4
3-1/2
6
1-15/16
2-3/4
3-1/2
1N193PPB
1N275PPB
1N350PPB
2N193PPB
2N275PPB
2N350PPB
2N600PPB
3N193PPB
3N275PPB
3N350PPB
1
1
1
2
2
2
2
3
3
3
Part No.
Size
1/4
1/4
1/4
1/4
1/4
X
X
X
X
X
3
3
4
6
8
Strut
Limited
Clearance Bit
25D300MBH
25D300MBH
25D400MBH
25D600MBH
25D800MBH
Threaded
Rod
1/4" Hex
Insert Bits
Fasteners
Power Bits & Nut Setters
Phillips Insert Bits
Anchors
Power Bits & Nut Drivers
Torx® Bits
Part No.
7
8
9
10
15
20
25
27
30
40
1
1
1
1
1
1
1
1
1
1
7N100TOB
8N100TOB
9N100TOB
10N100TOB
15N100TOB
20N100TOB
25N100TOB
27N100TOB
30N100TOB
40N100TOB
SHORT
Hex
Size
Overall
Length
Part
No.
3/16
1/4
5/16
3/8
7/16
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
18D162MNS
25D162MNS
31D162MNS
37D162MNS
43D162MNS
Description
LONG
48-32-1500 38-PC Universal Quik-Lok
Drill & Drive Set
Square Insert Bit
1/4” Hex Shank Insert Bits
21-Piece Universal
Quik-Lok® Drill and Drive Set
Part No.
Description
Point
Size
Overall
Length
Part
No.
1
1
1-15/16
1
1-15/16
1-15/16
3
0NSQI
1N100SQI
1N193SPB
2N100SQI
2N193SPB
3N193SPB
3N100SQI
0
1
1
2
2
3
3
Hex
Size
Overall
Length
Part
No.
2-9/16
2-9/16
6
2-9/16
3-3/16
6
2-9/16
2-9/16
18D256MNS
25D256MNS
25D600MNS
31D162MNS
31D318MNS
31D600MNS
37D256MNS
43D256MNS
3/16
1/4
1/4
5/16
5/16
5/16
3/8
7/16
48-32-0321 21-PC Universal Quik-Lok
Drill & Drive Set
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
315
Tools
Part
No.
Abrasives
• Universal Quik-Lok
• Premium Grade S2 Tool Steel Screwdriver Bits - durable composition for
longer bit life
• Titanium Hex Shank Drill Bits - long life
and superior performance
• Magnetic Nut Drivers - ideal for fast,
easy driving of nuts, bolts and hex head
screws
®
Overall
Length
OnSite
Supply
38-Piece Universal
Quik-Lok® Drill and Drive Set
Point
Size
Safety
Magnetic for Driving Hex Head
Self Drilling Fasteners
Rentals
1/4” Hex Drive Nut Setters
Pipe
Hangers
1/4” Hex Shank Insert Bits
Fasteners
Corded Impact Drivers / Wrenches
Anchors
9071-20
9070-20
9092-20
1/2" Impact Wrench
Strut
7/16" Impact Wrench
Threaded
Rod
• High torque - 315 ft. lbs.
• Quick-change 7/16 in. hex retention
system
• Bracket and steel ring for easy transport
• Great balance and soft-grip handle
• Variable speed switch for maximum user
control, 600-1,800 RPM
Specifications
Pipe
Hangers
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Torque:
Drive Size:
Socket Retention:
Weight:
Part No.
120 V AC
7.0
600-1,800 rpm
1000-2,600 bpm
315 ft.-lbs.
7/16" Hex
Quik Change
6.5 lbs.
• 300 ft. lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor
• Balanced feel and cushioned grip.
• Friction ring ('hog' ring) socket retention
system.
Specifications
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Torque:
Drive Size:
Socket Retention:
Weight:
Part No.
120 V AC
7.0
1,800 rpm
2,600 bpm
300 ft.-lbs.
1/2" Square
Friction ('Hog') Ring
6.0 lbs.
Description
9071-20 1/2" Impact Wrench
Description
1/2" Impact Wrench
• 300 ft. lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor, 1800 RPM and
2600 IPM (no load).
• Balanced feel and cushioned grip.
• Pin detent system to securely retain
sockets and adapters.
Specifications
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Drive Size:
Socket Retention:
Weight:
Part No.
120 V AC
7.0
1,800 rpm
2,600 bpm
1/2" Square
Flat End Detent Pin
6.0 lbs.
Description
9070-20 1/2" Impact Wrench
9092-20 7/16" Impact Wrench
Tools
4
DW297
Abrasives
Heavy Duty
3/4" Impact Wrench
9075-20
3/4" Impact Wrench
OnSite
Supply
• 380 ft.-lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor
• Balanced feel and cushioned grip.
• Friction ring and through hole socket
retention system.
Specifications
Safety
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Drive Size:
Torque:
Socket Retention:
Weight:
Part No.
120 V AC
7.0
1,750 rpm
2,600 bpm
1/2" Square
380 ft._lbs.
Friction ('Hog') Ring
6.0 lbs.
Description
Rentals
9075-20 1/2" Impact Wrench
316
• Easy forward or reverse, can run on AC
or DC current
• Ball bearing construction for increased
durability
• High torque level for heavy-duty fastening applications - 434 ft. lbs.
• Externally replaceable brushes for easy
serviceability.
• Includes 360° handle
• Excellent ergonomics.
DW292
Heavy Duty
1/2" Impact Wrench
• 345 ft-lbs of deliverable torque in forward and reverse.
• 1/2" detent pin anvil.
• AC/DC forward/reverse rocking switch
• Soft grip handle for superior ergonomics
• Ball bearing construction for increased
durability.
• Excellent ergonomics.
Specifications
Specifications
Volts:
AMPS:
No Load Speed:
Impacts/Min:
Torque:
Weight:
Part No.
DW297
Hartford, CT
800-969-0285
120 V AC
7.5 Amps
1,600 rpm
1,800 ipm
434 ft.-lbs.
11.0 lbs.
Description
3/4" Impact Wrench
Boston , MA
800-645-6155
Volts:
AMPS:
No Load Speed:
Impacts/Min:
Torque:
Weight:
Part No.
120 V AC
7.5 Amps
2,100 rpm
2,700 ipm
345 ft.-lbs.
7.0 lbs.
Description
DW292
1/2" Impact Wrench
DW292K 1/2" Impact Wrench w/Kit Box
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Corded Hammer Drills / Bits
5387-22
• 1/2 in. Capacity, 7.5 amp motor.
• Trigger speed control in two ranges: 0-1350 rpm, 0-22,000
bpm, 0-2500 rpm, 0-40,000 bpm, reversing.
• Hammer with rotation or rotation only.
• Self-stop brush system.
• Includes depth guage, Side handle, Chuck key and Impact-resistant carrying case.
Specifications
Specifications
Description
5378-20 1/2" Pistol Grip, Dual Torque Hammer Drill
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Chuck Type:
Weight:
Part No.
120 V AC
8.5
0-1,000/0-2,500 rpm
0-16,000/0-40,000 bpm
Keyed
6.4 lbs.
Pipe
Hangers
Description
5387-22 1/2" Dual Speed Hammer Drill Kit
5387-20 1/2" Dual Speed Hammer Drill Tool only
Hex shank for more secure chuck grip
Individual
Bit
Part No.
Bulk Bits
Part No.
Bulk Qty
per Pack
1/8 x 1-1/2 x 3
48-20-6800
48-20-6900
25
3/16 x 1-1/2 x 4
48-20-6805
48-20-6905
25
3/16 x 4-1/2 x 6
48-20-6806
48-20-6906
25
1/4 x 2-1/2 x 4
48-20-6810
48-20-6910
25
1/4 x 4-1/2 x 6
48-20-6811
48-20-6911
25
5/16 x 2-1/2 x 4
48-20-6815
48-20-6915
25
5/16 x 4-1/2 x 6
48-20-6816
—
—
3/8 x 2-1/2 x 4
48-20-6820
48-20-6920
20
3/8 x 4-1/2 x 6
48-20-6821
48-20-6921
20
3/8 x 12 x 13-1/2
48-20-6823
—
—
Hex shanks can be gripped more firmly than round shank bits,
therefore reducing the likelihood of slipping. Use these bits for
drilling primarily softer materials such as masonry, brick, block,
softer aggregate concrete, etc. Use with hammer-drills that have
a 3 jaw chuck.
OnSite
Supply
Size
Dia.x U.L. x O.L.
( Inches )
Tools
Carbide Tipped Hex Shank
Hammer-Drill Bits
7/16 x 4-1/2 x 6
48-20-6825
—
—
1/2 x 4-1/2 x 6
48-20-6830
48-20-6930
15
4-piece Hex Shank Carbide Tipped Hammer-Drill Bit Set
1/2 x 12 x 13-1/2
48-20-6833
—
—
9/16 x 4-1/2 x 6
48-20-6835
—
—
48-20-6850 Set includes one each of: 48-20-6805, 48-20-6810,
48-20-6815 and 48-20-6820
5/8 x 4-1/2 x 6
48-20-6840
—
—
5/8 x 12 x 13-1/2
48-20-6843
—
—
3/4 x 4-1/2 x 6
48-20-6845
-—
—
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Abrasives
Part No.
• Tool includes Depth guage, Side handle,
120 V AC
7.5
0-1,350/0-2,500 rpm
0-20,000/0-40,000 bpm
Keyed
6.0 lbs.
Safety
Volts:
Max. Amps:
No Load Speed:
No Load BPM:
Chuck Type:
Weight:
• KIT Includes depth guage, Side handle, Chuck key and Impact
resistant carrying case.
6-piece Hex Shank Carbide Tipped Hammer-Drill Bit Set
48-20-6851 Set includes one each of: 48-20-6805, 48-20-6810,
48-20-6811, 48-20-6815 and 48-20-6820
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
317
Rentals
1/2" Dual-Speed Hammer Drill Kit
• 1/2 in. capacity; 7.5 amp motor.
• Trigger speed control in two ranges: 0-1350 rpm, 0-22,000
bpm; 0-2500 rpm, 0-40,000 bpm; reversing.
• Hammer with rotation or rotation only.
• Self-stop brush system.
Threaded
Rod
1/2" Pistol Grip, Dual Torque Hammer Drill
Strut
5378-21
Fasteners
Corded SDS Rotary Hammers
3/4" SDS Drive Pistol Grip Rotary Hammer
Anchors
• Two modes of operation: rotation with hammering and rotation only.
• Speed control switch allows more accurate hole positioning.
• Lightweight, compact 13 in. length and well balanced design including an ergonomically
shaped cushioned grip.
• Includes depth gauge, side handle and carrying case.
Specifications
Volts:
Max. Amps:
Impact Energy:
Strut
5383-21
Part No.
120 V AC
6.0
1.7 ft.-lbs.
No Load Speed:
No Load BPM:
Weight:
0-1,270 rpm, Reversing
0-5,000 bpm
11.9 lbs.
Description
5383-21 3/4" SDS Drive Pistol Grip Rotary Hammer
BOSCH 7/8" SDS-plus Bulldog Rotary Hammer
• 360° Auxiliary handle with built-in depth gauge.
• D-handle design.
• Integral clutch — helps minimize torque reaction
• 3 modes of operation, rotation only, rotary hammer and hammer only mode
• Variable-speed reversing trigger — for accurate bit starting, as well as removing fasteners
or bound bits.
• Vario-Lock™ positioning — rotates and locks chisel into 36 different positions to optimize
working angle.
11224VSR
Threaded
Rod
Specifications
Pipe
Hangers
Volts:
Max. Amps:
Weight:
Part No.
120 V AC
6.9
6.5 lbs.
No Load Speed:
No Load BPM:
0-1,150 rpm, Reversing
0-6,150 bpm
Description
11224VSR 7/8" SDS Plus Bulldog Rotary Hammer
7/8" Compact SDS Drive Pistol Grip Rotary Hammer
Tools
COMPACT
• Lightweight design for easy use and handling in a variety of orientations
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• Reversing feature helps release tool from bind up situations, and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• 360° side handle adjusts easily for preference or use in tight spaces
• Pistol grip design for preferred balance in multiple orientations
• Includes depth gauge, side handle and carrying case.
Specifications
Abrasives
Volts:
Max. Amps:
Impact Energy:
D25012K
Part No.
120 V AC
6.0
1.8 ft.-lbs.
No Load Speed:
No Load BPM:
Weight:
0-1,150 rpm, Reversing
0-4,150 bpm
5.2 lbs.
Description
D25012K 7/8" Compact SDS Drive Pistol Grip Rotary Hammer
7/8" Compact SDS Drive D-Handle Rotary Hammer
OnSite
Supply
COMPACT
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• Lightweight design for easy use and handling in a variety of orientations
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Reversing feature helps release tool from bind up situations and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• 360° side handle adjusts easily for preference or use in tight spaces
• D-handle design offers preferred balance for downward drilling
• Includes depth gauge, side handle and carrying case.
Safety
Specifications
D25023K
Volts:
Max. Amps:
Impact Energy:
Part No.
120 V AC
6.9
1.8 ft.-lbs.
No Load Speed:
No Load BPM:
Weight:
0-1,550 rpm, Reversing
0-4,550 bpm
5.5 lbs.
Description
Rentals
D25023K 7/8" Compact SDS Drive Pistol Grip Rotary Hammer
318
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• All metal gear case and block construction.
• Anti-Vibration System, soft grip handle and two-finger trigger for optimal comfort.
• Three modes of operation - Hammerdrill / Drill / Chipping for maximum versatility.
• Rotating Brush Plate for equal power in forward and reverse.
• Compact and lightweight L-shape design.
• Includes depth gauge, side handle & carrying case.
COMPACT
Anchors
1" Compact SDS Rotary Hammer w/Anti-Vibration
Specifications
Part No.
120 V AC
7.0
2.0 ft.-lbs.
No Load Speed:
No Load BPM:
Weight:
0-1,400 rpm, Reversing
0-5,980 bpm
11.9 lbs.
Description
Strut
Volts:
Max. Amps:
Impact Energy:
Fasteners
Corded SDS Rotary Hammers
5363-21
5363-21 1" SDS Rotary Hammer with Vibration Control
1" D-Handle SDS Plus Hammer - Single & 3-Mode
Threaded
Rod
• Reverse feature assists in the removal of fasteners.
• Variable speed allows for precise hole placement on work surface.
• Factory set clutch reduces sudden, high torque reactions if bit jams.
• 360° side handle adjusts easily for preference or use in tight spaces.
• Includes depth gauge, side handle & carrying case.
Specifications
Volts:
120 V AC
Max. Amps:
8.0
Impact Energy:
2.2 ft.-lbs.
Chipping - D25211K: No
Chipping - D25213K: Yes
Part No.
No Load Speed:
Loaded Speed:
No Load BPM:
Weight:
0-1,400 rpm, Reversing
0-850 bpm
0-5,980 bpm
11.9 lbs.
D25211K
Pipe
Hangers
Description
D25211K 1" D-Handle Single Mode SDS Plus Hammer
D25213K 1" D- Handle 3-Mode SDS Plus Hammer
1" Pistol Grip SDS-Plus Hammer - Single & 3-Mode
Tools
• Reverse feature assists in the removal of fasteners.
• Variable speed switch (VSR) allows for precise hole placement on work surface.
• Factory set clutch reduces sudden, high torque reactions if bit jams.
• 360° side handle adjusts easily for preference or use in tight spaces.
Specifications
Volts:
120 V AC
Max. Amps:
8.0
Impact Energy:
2.5 ft.-lbs.
Chipping - D25111K: No
Chipping - D25113K: Yes
Part No.
No Load Speed:
Loaded Speed:
No Load BPM:
Weight:
0-1,150 rpm, Reversing
0-850 bpm
0-4,300 bpm
5.72 lbs.
D25113K
Abrasives
Description
D25111K 1" Pistol Grip, Single Mode SDS Plus Rotary Hammer
D25113K 1" Pistol Grip, 3-Mode SDS Plus Rotary Hammer
OnSite
Supply
1" D-Handle SDS Plus Hammer - w/SHOCKS Active Vibration Control
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• SHOCKS – Active Vibration Control® reduces vibration up to 50%
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Reversing feature helps release tool from bind up situations, and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• User preferred balance for downward drilling
• Includes depth gauge, side handle & carrying case
Volts:
Max. Amps:
Impact Energy:
Chipping:
No Load Speed:
Loaded Speed:
No Load BPM:
Weight:
0-1,150 rpm, Reversing
0-850 bpm
0-4,300 bpm
7.0 lbs.
D25223K
Description
D25223K 1" D-Handle SDS Plus Hammer w/ SHOCKS Active Vibration Control
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
319
Rentals
Part No.
120 V AC
8.0
2.5 ft.-lbs.
Yes
Safety
Specifications
Fasteners
Corded SDS Rotary Hammers
Anchors
D25323K
D25314K
Strut
1" L-Shaped SDS Plus Hammers
Threaded
Rod
• L-Shape design offers superior balance and control.
• 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping.
• Lightweight design provides comfort for extended use.
• Dust extraction connection allows the use of the D25300D dust
collection system.
• Hammer-only mode allows user to perform light chipping applications.
Additional Features for Model D25314K:
• Quick Change Removable Chuck allows easy replacement of
SDS or 3-Jaw Keyless Chuck (included for drilling).
• "Rotation Only Mode" allows use for wood and metal drilling.
Specifications
Pipe
Hangers
Volts:
Impact Energy:
Chipping:
Switch:
Weight:
Part No.
120 V AC
Amps:
8.0 Amps
2.5 ft/lbs
No Load Speed: 0-1,150 rpm
Yes
Loaded Speed:
0-850 rpm
VSR
Blows/Min:
0-4,300 bpm
6.5 lbs. (D25313K) / 6.8 lbs. (D25314K)
Description
1" L-Shaped SDS Plus Hammers
with SHOCKS - Active Vibration Control
• L-Shape design offers superior balance and control.
• 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping.
• Lightweight design provides comfort for extended use.
• Dust extraction connection allows the use of the D25300D dust
collection system.
• Hammer-only mode allows user to perform light chipping applications.
Additional Features for Model D25324K:
• Quick Change Removable Chuck allows easy replacement of
SDS or 3-Jaw Keyless Chuck (included for drilling).
• "Rotation Only Mode" allows use for wood and metal drilling.
Specifications
Volts:
Impact Energy:
Chipping:
Switch:
Weight:
Part No.
D25313K 1" SDS Plus Single-Mode Hammer
D25314K 1" SDS Plus 3-Mode Hammer
120 V AC
Amps:
8.0 Amps
2.5 ft/lbs
No Load Speed: 0-1,150 rpm
Yes
Loaded Speed:
0-850 rpm
VSR
Blows/Min:
0-4,300 bpm
7.5 lbs. (D25323K) / 7.8 lbs. (D25324K)
Description
Tools
D25323K 1" SDS Plus Single-Mode Hammer
D25324K 1" SDS Plus 3-Mode Hammer
Abrasives
11255VSR
BOSCH 1" SDS-plus Bulldog EXTREME Rotary Hammer
OnSite
Supply
• Multi-function Selector — 3 modes of operation, rotation only,
rotary hammer and hammer-only mode.
• Vario-Lock™ positioning — rotates and locks chisel into 36 different positions to optimize working angle.
• SDS-plus® bit system — tool-free bit changes with automatic bit
locking, dust protection and maximum impact energy transfer rate.
• D-Handle design — Ideal for overhead and downward drilling.
• Variable-speed Reversing Trigger — For accurate bit starting as
well as removing fasteners or bound bits.
5359-21
1-1/8" L-Shaped SDS Rotary Hammer
• Three modes of operation: rotation with hammering, hammer-only
and rotation-only.
• Speed control switch allows more accurate hole positioning.
• Lightweight, compact 14 in. length and well balanced design.
• Includes depth guage, Side handle & Carrying case.
Safety
Specifications
Specifications
Volts:
Amps:
Weight:
120 V AC
7.2 Amps
6.5 lbs.
Part No.
No Load Speed:
Blows/Min:
Description
11255VSR 1" SDS Plus Bulldog Rotary Hammer
Rentals
320
Hartford, CT
800-969-0285
0-1,300 rpm
0-5,800 bpm
Volts:
Max. Amps:
No Load BPM:
Part No.
120 V AC
7.4
0-4,200 bpm
Impact Energy: 2.5 ft.-lbs.
No Load Speed: 0-980 rpm
Reversing
Weight:
8.3 lbs.
Description
5359-21 1-1/8" L-Shaped SDS Rotary Hammer
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Flutes — More Rigid / Better Dust Extracting Multi-Fluted
Spiral Execution
Part
No.
48-20-
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
5/32 x 2 x 4-1/2
7500
3/16 x 2 x 4-1/2
7510
5/32 x 4 x 6
7501
3/16 x 4 x 6
7511
3/16 x 2 x 4-1/2
7510
1/4 x 2 x 4-1/2
7530
3/16 x 4 x 6
7511
1/4 x 4 x 6
7531
3/16 x 6 x 8
7512
5/16 x 4 x 6
7541*
3/16 x 8 x 10
7513
3/8 x 4 x 6
7551**
3/16 x 10 x 12
7514
1/2 x 4 x 6
7571†
3/16 x 12 x 14
7515
* Contains 150 per pack
** Contains 125 per pack
† Contains 100 per pack
3/16 x 14 x 16
7416
• Four Fluted Spiral – Removes concrete dust faster.
• Shaft Strength – Improved for less bending / breakage.
• Drilling is Smoother – Due to less vibration.
• More Efficient – More energy of the hammer blow is transmitted
to the tip to improve drilling speed.
2-Cutter
Individual Bits
2-Cutter
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
Part
No.
Size (In)
Dia. x U.L. x O.L.
48-20-
48-20-
5/32 x 2 x 4-1/2
7400
3/8 x 4 x 6
7451
5/32 x 4 x 6
7401
3/8 x 6 x 8
7452
3/16 x 2 x 4-1/2
7410
3/8 x 8 x 10
7453
7411
7/32 x 4 x 6
7521
3/16 x 4 x 6
3/8 x 10 x 12
7454
7/32 x 6 x 8
7522
3/16 x 6 x 8
7412
3/8 x 16 x 18
7457
3/16 x 8 x 10
7413
3/8 x 22 x 24
7459
3/16 x 10 x 12
7414
7/16 x 4 x 6
7461
3/16 x 12 x 14
7415
7/16 x 10 x 12-1/2
7464
3/16 x 14 x 16
7416
7/32 x 4 x 6
7421
7/16 x 16 x 18
7467
7/32 x 6 x 8
7422
1/2 x 4 x 6
7471
7/32 x 9 x 11
7424
1/2 x 8 x 10
7473
7/32 x 12 x 14
7425
1/2 x 10 x 12
7474
7/32 x 14 x 16
7426
1/2 x 16 x 18
7477
1/4 x 2 x 4-1/2
7530
1/2 x 22 x 24
7479
1/4 x 4 x 6
7531
9/16 x 4 x 6-1/2
7481
1/4 x 6 x 8
7532
9/16 x 10 x 12-1/2
7484
1/4 x 9 x 11
7534
9/16 x 16 x 18
7487
5/8 x 4 x 6
7601
7/32 x 9 x 11
7/32 x 12 x 14
7/32 x 14 x 16
7524
7525
7526
1/4 x 2 x 4-1/2
7530
1/4 x 4 x 6
7531
1/4 x 6 x 8
7532
1/4 x 9 x 11
7534
1/4 x 12 x 14
7535
1/4 x 14 x 16
7536
5/16 x 4 x 6
7541
3/8 x 4 x 6
7551*
3/8 x 10 x 12
7554*
1/2 x 4 x 6
7571**
1/2 x 10 x 12
7574**
5/8 x 6 x 8
7702†
* Contains 20 per pack
** Contains 15 per pack
† Contains 10 per pack
Philadelphia, PA
610-647-8070
5-Pc 44-Magnum™
Carbide-Tipped Bit Set
48-20-7490
Includes:1 each diameter bit:
• 3/16" x 4-1/2"
• 1/4" x 6"
• 5/16" x 6"
• 3/8" x 6"
• 1/2" x 6"
Washington D.C.
877-419-2755
Fasteners
Individual SDS Hammer Bits
1/4 x 12 x 14
7535
1/4 x 14 x 16
7536
5/8 x 6 x 8
7602
1/4 x 18 x 20
7538
5/8 x 10 x 12
7604
5/16 x 4 x 6
7441
5/8 x 16 x 18
7607
7444
5/8 x 22 x 24
7609
5/16 x 10 x 12
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Pipe
Hangers
Size (In)
Dia. x U.L. x O.L.
2-Cutter
Monster Packs
(200/Pack)
321
Tools
2-Cutter
Bulk Bits
(25/Pack)
Abrasives
Bulk Packaging Saves Time and Money!
OnSite
Supply
Bulk SDS Hammer Bits
Safety
Chisel Shaped
Drill Head
Rentals
Centering Point
and Edge Cutting
• Centering Point – More accurate starting of holes.
• Unique Edge Design – Allows cutting mesh and small diameter
re-bar with less likelihood of tip breakage.
• Unique Face Design – Directs concrete dust into the flute’s
pick up area quickly for faster drilling.
• Chisel Design – Distinctive chisel shape efficiently penetrates
concrete, improving drilling speed.
Anchors
Tip — Aggressive Geometry
Strut
Premium SDS Hammer Bits
Threaded
Rod
SDS Carbide Bits / Accessories
Fasteners
SDS Carbide Bits / Accessories
Solid Carbide Head SDS+ Bits
Heavy-Duty SDS Hammer Bits
Anchors
2-Cutter
Individual Bits
4-Cutter
Individual Bits
Strut
Size (In)
Dia. x U.L. x O.L.
4-Cutter Solid Carbide Tip
Threaded
Rod
• MX4 Carbide Drill Bits feature a solid carbide tip for
maximum strength and centering tip for more accurate hole
placement
• 3X Longer life than competitors when drilling in reinforced
concrete.
• 90° Cutter alignment resists locking-up in rebar
• Spiraled flutes remove debris quickly and provide impact
durability
Compare to Hilti TEC3X Bits
Individual MX4 SDS+ Hammer Bits
Pipe
Hangers
4-Cutter Solid
Carbide Tipped
Individual Bits
Size (In)
Dia. x U.L. x O.L.
4-Cutter Solid
Carbide Tipped
Individual Bits
Part
No.
48-20-
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
Tools
7310
5/16 x 4 x 6
7341
7311
3/8 x 4 x 6
7351
3/16 x 6 x 8
7312
3/8 x 10 x 12
7354
3/16 x 8 x 10
7313
3/8 x 16 x 18
7357
3/16 x 10 x 12
7314
1/2 x 4 x 6
7371
Abrasives
1/4 x 2 x 4
7330
1/2 x 10 x 12
7374
1/4 x 4 x 6
7331
1/2 x 16 x 18
7377
1/4 x 6 x 8
7332
1/4 x 9 x 11
7334
1/4 x 12 x 14
7335
5/8 x 6 x 8
7200
3/4 x 6 x 8
7061
5/8 x 10 x 12
7203
3/4 x 8 x 10
7063
5/8 x 16 x 18
7206
3/4 x 10 x 12
7065
3/4 x 6 x 8
7210
3/4 x 16 x 18
7066
3/4 x 10 x 12
7215
3/4 x 22 x 24
7067
3/4 x 16 x 18
7220
7/8 x 6 x 8
7071
7/8 x 6 x 8
7225
7/8 x 10 x 12
7072
7/8 x 10 x 12
7230
7/8 x 16 x 18
7075
7/8 x 16 x 18
7236
1 x 8 x 10
7080
1 x 8 x 10
7240
1 x 16 x 18
7085
1 x 16 x 18
7246
1-1/8 x 8 x 10
7530
1-1/8 x 16 x 18
7531
Stop Overdrilling Holes
for Drop-ins & Mini-Dropins
SDS
OnSite
Supply
0397 SDS-PLUS ACCU-BIT
for 3/8" Drop-In anchors
0398 SDS-PLUS ACCU-BIT for
3/8" MINI Drop-In anchors
SDS-Plus Accu-Bit for 3/8" Dropin
& Mini Dropin Anchors
Safety
Drill precise depth holes in concrete for 3/8" Dropin and 3/8"
Mini Dropin anchors.
Part No.
Description
Anchor Size
0397
1/2" Accu-Bit for Dropin Anchors
3/8"
0398
1/2" Accu-Bit for Mini Dropin Anchors
3/8"
Rentals
322
Hartford, CT
800-969-0285
48-20-
7058
48-20-
3/16 x 4 x 6
Part
No.
11/16 x 6 x 8
Part
No.
3/16 x 2 x 4
Size (In)
Dia. x U.L. x O.L.
Part No.
-Bit
Description
Anchor Size
For Standard Dropin Anchors
207STP-6-17
3/8" x 1-1/16" Stop-Bit
1/4"
207STP-8-27
1/2" x 1-11/16" Stop-Bit
3/8"
5/8" x 2-1/16" Stop-Bit
1/2"
207STP-10-33
For Mini Dropin Anchors
207STP-10-19
5/8" x 1-3/16" Stop-Bit
1/2"
207STP-8-13
1/2" x 13/16" Stop-Bit
3/8"
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Industrial Grade SDS Bits Value Paks
The SDS Bit for Volume Users
Available in Bulk Pack (Standard Box) quantities only - with
the volume user in mind. Manufactured to conform to ANSI
standard B212.15 and can be used in concrete, block brick and
soft stone. Sold in Standard box or carton quantities only.
Fasteners
SDS Rebar Cutters
Anchors
SDS Carbide Bits / Accessories
Non-Removable Shank Rebar Cutters
8"
RB-6
SB-6
850-1200
1/2"
12"
RB-8
SB-8
850-1200
9/16"
12"
RB-9
SB-9
850-1200
5/8"
12"
RB-10
SB-10
750-1000
5/8"
18"
RB-10-18
SB-10-18
750-1000
11/16"
12"
RB-11
SB-11
750-1000
3/4"
12"
RB-12
SB-12
600-800
3/4"
18"
RB-12-18
SB-12-18
600-800
13/16"
12"
RB-13
SB-13
600-800
* Removable Shank Cutters - Available - Call for More Info
2-Cutter SDS Bits - with Hex Shoulder
for Tap-Con® Screw System
Size
Dia.x U.L. x O.L.
( Inches )
Individual
Bit
Part No.
Bulk Bits
Part No.
Bulk Qty
per Pack
5/32 x 2 x 5
48-20-7090
—
25
5/32 x 3 x 6
48-20-7096
48-20-7196
25
5/32 x 4 x 7
48-20-7091
48-20-7191
25
3/16 x 2 x 5
48-20-7097
—
25
3/16 x 3 x 6
48-20-7098
48-20-7198
25
3/16 x 4 x 7
48-20-7092
48-20-7192
25
SDS-MAX to SDS Adapter
48-03-3015
48-03-3025
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
25
500
3/16 x 2 x 4
0803
25
450
3/16 x 4 x 6
0805
25
500
3/16 x 6 x 8
0807
25
450
3/16 x 8 x 10
0809
25
300
7/32 x 4 x 6
0811
25
500
7/32 x 6 x 8
0813
25
450
7/32 x 8 x 10
0815
25
300
1/4 x 2 x 4
0817
25
450
1/4 x 4 x 6
0819
25
500
1/4 x 6 x 8
0821
25
450
1/4 x 8 x 10
0823
25
300
5/16 x 4 x 6
0825
25
500
3/8 x 4 x 6
0827
25
300
1/2 x 4 x 6
0829
15
180
5/8 x 6 x 8
0831
15
120
SDS (or SDS Plus) Hammer Steel
(for chipping and chiseling)
Adapters
Spline to SDS Adapter
0801
Threaded
Rod
3/8"
5/32 x 4 x 6
Pipe
Hangers
Rec. RPM
Boston , MA
800-645-6155
Description
Individual
Bit Part No.
Bull Point
Starts holes in
concrete slabs,
general chipping &
breaking. 10" L.
48-62-6010
Flat Chisel
General chipping
and breaking
work. 3/4" x 10".
48-62-6015
Scaling Chisel
Wide chisel with
(2) 60° cutting
angles. Cleans
concrete, scale &
rust, cuts troughs
& some asphalt.
1-1/2" x 10".
48-62-6020
Hartford, CT
800-969-0285
Bulk Bit
Part no.
Abrasives
SDS Shank
P/N
Carton
48-62-6110
(25/Box)
OnSite
Supply
Hex Shank
P/N
Std
Box
48-62-6015
(25/Box)
48-62-6120
(25/Box)
323
Safety
Length
Part No.
Rentals
Diameter
Size (In)
Dia. x U.L. x O.L.
Tools
No more broken or shattered hammer bits; now you can drill
through the rebar and not have to relocate the hole to avoid
the rebar!
Strut
2-Cutter Bits
Value Paks
The answer to drilling through concrete-embedded rebar!
Fasteners
Corded SDS-MAX Hammers
Anchors
5426-21
D25500K
Strut
1-9/16" SDS MAX Rotary Hammer Kit
1-3/4" SDS MAX Rotary Hammer Kit
Threaded
Rod
• 14 Amp provides best in class power and highest overload protection.
• 8.8 ft/lbs impact energy - delivers hard hitting performance.
• 2 Speed Impact Mode- low reduces speed (350 RPM) and beats
per minute (2,200 BPM) for light materials
• Constant Power Technology- maintains drilling speed and power
when the tool is under load.
• Mechanical Clutch - protects the gears and provides added control.
• Anti Vibration System - reduces user vibration / increases productivity.
• 11.0 Amp motor delivers high output and overload protection.
• Electronic Variable Speed allows the user to control the speed
of drilling and chipping.
• 7.3 ft-lbs of impact energy provides fast drilling and powerful chipping
• Rubber grip helps reduce the level of vibration felt by the user.
• Factory clutch helps reduce the tools reaction to embedded
steel when bits "lock-up" while in operation, preventing injury.
• Includes: 360° side handle, depth rod and kit box.
Specifications
Specifications
Pipe
Hangers
Volts:
120 V AC
Amps:
14.0 Amps
Impact Energy: 8.8 ft/lbs
No Load Speed: 350-450 rpm
Loaded Speed: 2,200-2,800 bpm
Part No.
Description
5426-21
1-3/4" SDS-MAX Rotary Hammer
Volts:
120 V AC
Amps:
11.0 Amps
Impact Energy: 7.3 ft/lbs
Chipping:
Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight:
13.0 lbs.
Part No.
Description
D25500K 1-9/16" SDS-MAX Rotary Hammer
Tools
Abrasives
D25600K
D25701K
1-3/4" SDS MAX Rotary Hammer Kit
1-7/8" SDS MAX Rotary Hammer Kit
OnSite
Supply
• 11.5 Amp motor delivers high output and overload protection.
• Electronic Variable Speed controls of the speed of drilling and chipping.
• 8 ft-lbs of impact energy provides fast drilling and powerful chipping
• Rubber grip helps reduce the level of vibration felt by the user.
• Factory clutch helps reduce the tools reaction to embedded
steel when bits "lock-up" while in operation.
• Includes: 360° side handle, depth rod and kit box.
• Complete Torque Control (CTC) utilizes patented 2-stage clutch
for maximum control in bind-up situations.
• SHOCKS™ - Active Vibration Control reduces vibration by up to 70%.
• Lock-on switch reduces user fatigue while chipping.
• 13 Amp motor provides maximum overload protection & power.
• Includes: 360° side handle, depth rod and kit box.
Specifications
Specifications
Safety
Volts:
120 V AC
Amps:
11.0 Amps
Impact Energy: 8.0 ft/lbs
Chipping:
Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight:
13.4 lbs.
Part No.
Rentals
Volts:
120 V AC
Amps:
13.0 Amps
Impact Energy: 11.7 ft/lbs
Chipping:
Yes
No Load Speed: 137-275 rpm
Loaded Speed: 1,262-2,520 bpm
Weight:
17.5 lbs.
Part No.
Description
D25600K 1-3/4" SDS-MAX Rotary Hammer
324
Hartford, CT
800-969-0285
Description
D25701K 1-7/8" SDS-MAX Rotary Hammer
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
2" SDS-MAX Drive Rotary Hammer
Part No.
Description
5342-21
2" SDS-MAX Rotary
Hammer
• Rear handle mount
• Lock-on slide switch
Hammer
Specifications
Volts:
120 V AC
Amps:
15.0 Amps
Impact Energy: 15 ft/lbs
Chipping:
Yes
No Load Speed: 125-250 rpm
Blows/Minute: 1,150-2,304 bpm
Weight:
19.2 lbs.
Part No.
• High Blow Energy 19.9 ft-lbs.
• User Friendly Vibration Isolation System
• Heavy-Duty Robust Construction.
• In-Line Design with 3 Side Handle Positions.
• Variable Speed Control Dial.
• Service Reminder Light.
• Soft-Grip on All Handles.
• Uses Standard SDS-max Accessories
• Includes Side handle & Carrying case.
Description
Anchors
120 V AC
15.0.
19.9 ft.-lbs.
125-250 rpm,
975-1,950 bpm
26.2 lbs.
5342-21
2" SDS-MAX Rotary
Strut
Volts:
Max. Amps:
Impact Energy:
No Load Speed:
No Load BPM:
Weight:
• 15 ft-lbs of impact energy provides maximum performance in drilling & chipping
• 15 Amp motor - maximum overload
protection & power
• Complete Torque Control (CTC)® 2-stage clutch for maximum control in
bind-up situations
• SHOCKS™ - Active Vibration Control
reduces vibration by up to 70%
Threaded
Rod
D25730K
D25730K 2"" SDS-MAX Rotary Hammer
Description
D25550K 1-9/16" Spline Rotary Hammer
• Vario-Lock™ positioning rotates and
locks chisel into 12 different positions to
optimize working angle.
Specifications
Volts:
120 V AC
Amps:
11 Amps
No Load Speed: 170-340 rpm
Blows/Min:
1,700-3,300 bpm
Weight:
14.4 lbs.
Part No.
Description
11248EVS 1-9/16" Spline Combination
Hammer
• Includes Side handle & Carrying case.
Specifications
Volts:
Max. Amps:
Impact Energy:
No Load Speed:
No Load BPM:
Weight:
120 V AC
15.0.
19.9 ft.-lbs.
125-250 rpm,
975-1,950 bpm
26.2 lbs.
Part No.
Description
5340-21
2" Spline Drive Rotary
Hammer
Philadelphia, PA
610-647-8070
Pipe
Hangers
• Electronic Variable Speed allows the user to
control the speed of drilling and chipping.
• 7.3 ft-lbs of impact energy provides fast drilling and powerful chipping.
• Rubber grip reduces the level of vibration.
• Factory clutch reduces the tools reaction
to embedded steel when bits "lock-up".
• Bit Lock allows user to unwind jammed bits.
• Includes: 360° side handle, depth rod
and kit box.
Tools
Part No.
1-9/16" Spline Rotary
Hammer Kit
D25550K
BOSCH 1-9/16" Spline Combination Hammer
• Spline/round hex bit system with automatic bit locking.
• Auto-Max® dial — variable speed dial.
• Constant Response & Service Circuitry – Provides
soft-start, maintains constant speed under load,
overload protection.
• "Combination" dual mode selector, rotary hammer and hammer only mode.
• Turbo™ Power - 20% more power in hammer only mode.
• Service Minder™ light - indicates when preventative maintenance is required.
• Vibration dampening handle - reduces vibration
up to 40%.
Abrasives
Volts:
120 V AC
Amps:
11.0 Amps
Impact Energy: 7.3 ft/lbs
Chipping:
Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight:
14.5 lbs.
11248EVS
OnSite
Supply
2" Spline Drive Rotary Hammer
• High Blow Energy 19.9 ft-lbs.
• User Friendly Vibration Isolation System
• Heavy-Duty Robust Construction.
• In-Line Design with 3 Side Handle Positions.
• Variable Speed Control Dial.
• Service Reminder Light.
• Soft-Grip on All Handles.
• Uses Standard Spline and Round/Hex
Accessories
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Specifications
5340-21
325
Rentals
Specifications
Fasteners
Corded SDS MAX & Spline Rotary Hammers
Fasteners
SDS-MAX / spline Carbide bits
SDS-MAX Carbide Bits
Spline Shank Carbide Bits
Anchors
SDS-Max Shank
Spline Shank
Use in SDS-Max Drive rotary hammers. These bits
are for use in any kind of concrete or masonry.
Use in Spline Drive rotary hammers. These bits are
for use in any kind of concrete or masonry.
Strut
Size (In)
Dia. x U.L. x O.L.
2-Cutter
4-Cutter
1/2 x 7-1/2 x 13
48-20-3902
—
1/2 x 15-1/2 x 21
48-20-3904
9/16 x 7-1/2 x 13
9/16 x 15-1/2 x 21
Size (In)
Dia. x U.L. x O.L.
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
2-Cutter
4-Cutter
3/8 x 5 x 10
48-20-4037
—
—
1/2 x 5 x 10
48-20-4050
—
48-20-3910
—
1/2 x 11 x 16
48-20-4051
—
48-20-3912
—
1/2 x 17 x 22
48-20-4052
—
5/8 x 7-1/2 x 13
-—
48-20-3916
1/2 x 22 x 27
48-20-4053
—
5/8 x 15-1/2 x 21
-—
48-20-3918
1/2 x 31 x 36
48-20-4054
—
5/8 x 30-1/2 x 36
-—
48-20-3922
9/16 x 5 x 10
48-20-4056
—
11/16 x 15-1/2 x 21
-—
48-20-3926
9/16 x 18 x 23
48-20-4057
—
3/4 x 8 x 13
-—
48-20-3930
5/8 x 5 x 10
48-20-4062
48-20-4300
3/4 x 17 x 21
-—
48-20-3932
5/8 x 11 x 16
48-20-4063
48-20-4305
3/4 x 31 x 36
-—
48-20-3936
5/8 x 17 x 22
48-20-4064
48-20-4310
13/16 x 17 x 21
-—
48-20-3938
5/8 x 24 x 29
—
48-20-4315
7/8 x 8 x 13
-—
48-20-3944
5/8 x 31 x 36
—
48-20-4320
7/8 x 17 x 21
-—
48-20-3946
11/16 x 11 x 16
48-20-4068
48-20-4325
1 x 8 x 13
-—
48-20-3952
3/4 x 5 x 10
48-20-4075
48-20-4330
1 x 17 x 21
-—
48-20-3954
3/4 x 11 x 16
48-20-4076
48-20-4335
1 x 31 x 36
-—
48-20-3956
3/4 x 17 x 22
48-20-4078
48-20-4340
1-1/16 x 18 x 23
-—
48-20-3958
3/4 x 24 x 29
—
48-20-4345
1-1/8 x 12 x 17
-—
48-20-3964
3/4 x 31 x 36
—
48-20-4350
1-1/8 x 17 x 21
-—
48-20-3966
13/16 x 11 x 16
48-20-4081
—
1-3/16 x 18 x 23
-—
48-20-3968
7/8 x 11 x 16
48-20-4087
48-20-4360
1-1/4 x 10 x 15
-—
48-20-3970
7/8 x 17 x 22
48-20-4088
48-20-4365
1-1/4 x 18 x 23
-—
48-20-3972
1 x 11 x 16
48-20-4100
48-20-4370
1-1/4 x 31 x 36
-—
48-20-3974
1 x 17 x 22
48-20-4101
48-20-4375
1-3/8 x 18 x 23
-—
48-20-3980
1x 31 x 36
-—
48-20-4380
1-7/16 x 18 x 23
-—
48-20-3984
1-1/8 x 11 x 16
48-20-4112
48-20-4385
1-1/2 x 18 x 23
-—
48-20-3988
1-1/8 x 17 x 22
48-20-4113
48-20-4390
1-9/16 x 18 x 23
-—
48-20-3990
1-1/4 x 11 x 16
48-20-4125
48-20-4395
1-5/8 x 18 x 23
-—
48-20-3991
1-1/4 x 17 x 22
48-20-4126
48-20-4400
1-3/4 x 18 x 23
-—
48-20-3992
1-1/4 x 31 x 36
—
48-20-4405
2 x 18 x 23
-—
48-20-3993
1-3/8 x 11 x 16
48-20-4137
—
1-3/8 x 17 x 22
48-20-4138
48-20-4410
1-1/2 x 11 x16
48-20-4150
—
1-1/2 x 17 x 22
48-20-4151
48-20-4415
1-3/4 x 18 x 23
—
48-20-4418
2 x 18 x 23
—
48-20-4419
Adapters
Safety
Spline to SDS Adapter
SDS-MAX to SDS Adapter
48-03-3015
48-03-3025
Rentals
326
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Thick Wall Carbide-Tipped Core Bits - SDS MAX & SPLINE
Fasteners
core bits
Component
Systems
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Extension
7-1/2"
1-1/2
4-1/16
48-20-5125
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5168
48-20-5199
1-3/4
2
4-1/16
48-20-5130
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5169
48-20-5199
4-1/16
48-20-5135
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5170
48-20-5199
2-1/2
4-1/16
48-20-5140
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5171
48-20-5199
3
4-1/16
48-20-5145
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5172
48-20-5199
3-1/2
4-1/16
48-20-5150
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5173
48-20-5199
4
4-1/16
48-20-5155
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5174
48-20-5199
5
4-1/16
48-20-5160
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5175
48-20-5199
6
4-1/16
48-20-5165
48-03-3564
48-03-3565
48-03-3572
48-03-3573
48-95-6085
48-20-5176
48-20-5199
Replacement Replacement
Guide Plate Centering Pin
Strut
Core Body w/
Drilling
Guide Plate &
Depth
Centering Pin
Threaded
Rod
Dia.
(Inch)
Pipe
Hangers
Thin Wall Carbide Tipped-Core Bits - SDS +
Component
Systems
Adapter
Shank
12" Length
Extension
7-1/2"
Replacement Replacement
Guide Plate Centering Pin
1
3-3/16
48-20-5005
48-03-3545
48-03-3551
48-95-6070
N/A*
N/A*
1-1/8
3-3/16
48-20-5010
48-03-3545
48-03-3551
48-95-6070
N/A*
N/A*
1-1/4
3-3/16
48-20-5015
48-03-3545
48-03-3551
48-95-6070
48-20-6151
48-20-6150
1-3/8
3-3/16
48-20-5020
48-03-3545
48-03-3551
48-95-6070
48-20-6152
48-20-6150
1-1/2
3-3/16
48-20-5025
48-03-3545
48-03-3551
48-95-6070
48-20-6153
48-20-6150
1-3/4
2-13/16
48-20-5030
48-03-3555
48-03-3561
48-95-6075
48-20-6156
48-20-6155
2
2-13/16
48-20-5035
48-03-3555
48-03-3561
48-95-6075
48-20-6157
48-20-6155
2-1/2
2-13/16
48-20-5040
48-03-3555
48-03-3561
48-95-6075
48-20-6158
48-20-6155
3
2-13/16
48-20-5045
48-03-3555
48-03-3561
48-95-6075
48-20-6159
48-20-6155
3-1/2
2-13/16
48-20-5050
48-03-3555
48-03-3561
48-95-6075
48-20-6160
48-20-6155
4
2-13/16
48-20-5055
48-03-3555
48-03-3561
48-95-6075
48-20-6161
48-20-6155
Tools
Adapter
Shank
8" Length
*Guide plate and
centering pin are
not included with
1" and 1-1/8"
diameter core bits.
Thin Wall Carbide-Tipped Core Bits - SDS MAX & SPLINE
Abrasives
Core Body w/
Drilling
Guide Plate &
Depth
Centering Pin
OnSite
Supply
Dia.
(Inch)
Core Body w/
Drilling
Guide Plate &
Depth
Centering Pin
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Extension
7-1/2"
Replacement Replacement
Guide Plate Centering Pin
5
2-13/16
48-20-5060
48-03-3540
N/A
48-03-3574
N/A
48-95-6075
48-20-6162
48-20-6155
6
2-13/16
48-20-5065
48-03-3540
N/A
48-03-3574
N/A
48-95-6075
48-20-6163
48-20-6155
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
327
Rentals
Dia.
(Inch)
Safety
Component
Systems
Fasteners
demolition & Breaker hammers
Demolition Hammers
Specifications
Anchors
• High Blow Energy – 19.9 ft-lbs
• User Friendly Vibration Isolation System
• In-Line Design with 3-Side Handle Positions
• Variable Speed Control Dial
• Service Reminder Light
• Soft-Grip on All Handles
• Lock-On Trigger
• Uses Standard 3/4 in. Hex Hammer Iron
or SDS-MAX Hammer iron
• Includes 2 auxiliary handles and case.
5337-21 3/4" HEX
5339-21 SDS-MAX
Part No.
5337-21
5339-21
Strut
SDS MAX Demolition Hammer
Threaded
Rod
• Active Vibration Control (AVC) reduces
vibration.
• Non-air pumping beatpiece eliminates
masonry dust from entering the unit
extending tool and seal life.
• Variable Impact Control Dial ensures accurate impact energy
• One-step chisel rotation (12 positions)
• Large rear rubber handle for easy operation with 1 or 2 hands.
• Variable position side handle allows 360°
rotation and 150° adjustment for ease of use.
D25901K
Volts:
Amps:
Blow Energy:
No Load BPM:
Bit Shank:
Weight:
120 V AC
14.0 Amps
19.9 ft.-lbs.
975 - 1,950 bpm
3/4" Hex or SDS-MAX
24.2 lbs.
Description
3/4" Hex Demolition Hammer
SDS-MAX Demolition Hammer
• In-line design for easy operation in horizontal or vertical applications.
• SDS Max toolholder with rubber dampers absorb energy.
Specifications
Volts:
120 V AC
Amps:
14.0 Amps
Max Watts Out: 750 W
Loaded Speed: 1,020-2,040 bpm
Weight:
21.6 lbs.
Part No.
Description
D25901K SDS-MAX Demolition Hammer
Pipe
Hangers
Breaker Hammers
1-1/8" Hex
Tools
1-1/8" Hex
Pavement Breaker
Abrasives
OnSite
Supply
Specifications
Safety
Volts:
Amps:
Impact Energy:
Loaded Speed:
Weight:
Part No.
D25980
BOSCH Brute™ Breaker Hammer
• 35 lb. Class Leader.
• Highest removal rate in its class
• Active Vibration Control.
• Shock absorbing top handle.
• In-Line Design with multiple grip positions.
• Large main handle.
• 360° Articulating Auxiliary Handle.
• Carrying Case with Wheels.
• 2-way Tool Retainer, accepts standard
1-1/8" hex, air tool steel with retaining collar or Bosch internal locking combo steel.
• Includes: Pointed Chisel, Articulating
Auxiliary Handle, Carrying Case with
Wheels, Grease tube, Cleaning rag.
• Total portability – Operates on 15 Amp
115/120 VAC or 2500 W portable generator.
• ServiceMinder™ brush system — Shuts
off when brush replacement, lubrication
or preventative maintenance is needed.
• Shock mounted handles – Absorbs vibration.
• 2-way tool retainer – Accepts standard
1-1/8" hex, air tool steel with retaining collar of Bosch internal locking combo steel.
• Kit includes Breaker Hammer, 2 Moil
Points, 2 Narrow Chisels, Hammer
Hauler Cart.
Description
Pavement Breaker, only
Rentals
BOSCH 35 lb. Breaker Hammer
Specifications
120 V AC
15.0 Amps
750 W
900 bpm
68.3 lbs.
D25980K Pavement Breaker w/ Hammer
Truck and Steel
328
1-1/8" Hex
11335K
• 61 Ft-lbs impact
energy.
• SHOCKS - Active
Vibration Control.
D25980K
• 15 amp motor.
• Rubber coated handles provide greater
comfort and control.
• Electronic soft start increases productivity.
• Hammer Truck provides easy transportation of pavement breaker.
• Includes (D25980K): Hammer Truck,
Flat Foot Plate for Hammer Truck,
Pegged Foot Plate for Hammer Truck, (2)
Bull point chisels, (1) 1" Cold Chisel, (1)
3" Wide Chisel
Volts:
Max. Amps:
Impact Energy:
No Load BPM:
Weight:
120 V AC
15.0.
34 ft.-lbs.
1300 bpm
38 lbs.
Part No.
Description
11335K
Brute™ Breaker Hammer
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Specifications
Volts:
Max. Amps:
Impact Energy:
No Load BPM:
Handle Span:
Weight:
Part No.
11304
11304K
120 V AC
15.0.
43 ft.-lbs.
1400 bpm
23-1/2"
64 lbs.
Description
Brute™ Breaker Hammer, only
Brute™ Breaker Hammer Kit
with Hammer Steel
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Use with breakers having 1-1/8" Hex Holders (Model 5338). All Shanks have
Internal Lock Recess.
48-62-4100
(8/box)
Narrow Chisel
General chipping and breaking work.
20-1/2"
48-62-4005
48-62-4105
(8/box)
3" Chisel
Wide chisel with (2) 60° cutting angles. Clean
concrete, scale and rust, cut troughs and some
asphalt.
20-1/2"
48-62-4010
48-62-4110
(8/box)
5" Asphalt
Cutter
Cuts asphalt or hard ground (Do not use for
concrete.)
17-1/2"
48-62-4020
48-62-4120
(6/box)
5-1/2" Clay
Spade
Digs clay, hard packed gravel, dirt. (Do not use
for concrete.)
48-62-4030
48-62-4130
(5/box)
Ground Rod
Driver
Drives ground rods.
15-1/2" x 3"
Deep
48-62-4045
N/A
Spike/Pin
Driver
Drives anchoring pins for concrete forms.
14-1/2"
48-62-4040
N/A
Tamper Shank
For use with 48-62-4050, 48-62-4055 and
48-62-4061.
15-1/2"
48-62-4060
N/A
Compacts dirt, tamps asphalt. Use with
48-62-4060 shank.
6" x 6"
48-62-4050
N/A
Tamper Shank
8" x 8"
48-62-4055
N/A
5-1/2"L x
3-1/2" O.D. x
2-3/4" I.D.
48-62-4061
N/A
Used to Drive in large tent stakes. Use with
48-62-4060 shank.
Adapters
(for chipping and chiseling)
Spline to SDS Adapter
SDS-MAX to SDS Adapter
48-03-3015
48-03-3025
Be sure to visit
www.GoNefco.com
Online Catalog • Submittals
• New Products •
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Description
Individual
Bit Part No.
Bull Point
Starts holes in
concrete slabs,
general chipping &
breaking. 10" L.
48-62-6010
Flat Chisel
General chipping
and breaking
work. 3/4" x 10".
48-62-6015
Scaling Chisel
Wide chisel with
(2) 60° cutting
angles. Cleans
concrete, scale &
rust, cuts troughs
& some asphalt.
1-1/2" x 10".
48-62-6020
Hartford, CT
800-969-0285
Bulk Bit
Part no.
Abrasives
SDS (or SDS Plus) Hammer Steel
48-62-6110
(25/Box)
OnSite
Supply
Tent Stake
Driver
20"
Strut
48-62-4000
20"
Threaded
Rod
Starts holes in concrete slabs, general chipping
and breaking.
Bulk Part
No.
Pipe
Hangers
Moil Point
Part No.
Tools
Overall
Length
Application
48-62-6015
(25/Box)
48-62-6120
(25/Box)
329
Safety
Description
Rentals
Style (Working
End)
Fasteners
1-1/8" Collared Hex Shank with Notch
Anchors
Hammer Steel
Fasteners
Hammer Steel
SDS-MAX - 3/4" Hex and 3/4" Hex with Round
Anchors
Hammer Steel (for breaking,
digging, driving, etc.)
SDS-Max Slotted
18 mm Round
Strut
(Fits hammers having the
following bit reception
configurations)
Style
(Working
End)
Description/
Application
Size
Bulk Part
No.
Part No.
Bulk Part
No.
Bulk Part
No.
Part No.
48-62-4175
(25/box)
48-62-2000
48-62-2100
(25/box)
48-62-3000
48-62-3100
(25/box)
48-62-4077
48-62-4177
(25/box)
48-62-2010
48-62-2110
(25/box)
48-62-3005
48-62-3105
(25/box)
1" x
12"
48-62-4079
48-62-4179
(25/box)
48-62-2020
48-62-2120
(25/box)
48-62-3010
48-62-3110
(25/box)
1" x
18"
48-62-4081
48-62-4181
(25/box)
48-62-2030
48-62-2130
(25/box)
48-62-3015
48-62-3115
(25/box)
1-1/2"
x 12"
48-62-4082
—
48-62-2040
—
48-62-3020
—
2" x
12"
48-62-4085
48-62-4185
(25/box)
48-62-2050
48-62-2150
(25/box)
48-62-3035
48-62-3135
(25/box)
3" x
12"
48-62-4087
48-62-4187
(25/box)
48-62-2055
48-62-2155
(25/box)
48-62-3030
48-62-3130
(25/box)
1-1/4"
x 15"
48-62-4073
—
—
—
—
—
1-1/2"
x 12"
—
—
48-62-2062
—
—
—
Seam Tool - Removes
mortar between brick,
or block; cut narrow
channels
1" x
15"
48-62-4080
—
48-62-2080
—
—
—
Bushing Tool - (1-pc.)
Removes excess concrete,
produces exterior finish,
roughens surface before
its surface coated
48-62-4065
48-62-2070
1-3/4" sq x
10-1/2"
48-62-4165
(15/box)
48-62-2170
(15/box)
48-62-3085
16
Tooth
Head
48-62-3185
(15/box)
Asphalt Cutter - Cuts
asphalt or hard ground.
(Do not use for concrete)
5" x
161/2"
48-62-4066
—
—
—
48-62-3090
—
Clay Spade - Digging clay,
hard packed gravel. (Do
not use for concrete)
4-1/2"
x
16-5/8"
48-62-4068
48-62-4168
(12/box)
48-62-2095
48-62-2195
(12/box)
48-62-3040
48-62-3140
(12/box)
Threaded
Rod
Flat Chisel - General
chipping and breaking
Pipe
Hangers
Scaling Chisel - Wide
chisels with (2) 60°
cutting angel cleans
concrete, scale and
rust, cuts troughs and
some asphalt
Tools
Slotting Tool - Breaks
out the "web" between
closely spaced drilled
holes to make a large
opening.
12"
18"
Abrasives
1-3/4" sq x
9-3/4"
1-3/4" sq x
10-1/2"
1-3/4" sq x
9-3/4"
1-3/4" sq x
9-3/4"
1-3/4" sq x
9-3/4"
OnSite
Supply
Safety
Ground Rod Driver
- Drives soft ground
rods. Inside diameter is
.906 inches and 2-3/4"
deep socket
For
5/8"
and
3/4"
Rods
48-62-4091
9-3/4" L
—
48-62-2046
10" L
—
48-62-3070
9-3/4" L
—
Tamper Plate Shank
Used to mount Tamper
Plate to tool.
12"
48-62-4092
—
48-62-2097
—
48-62-3065
—
5" Sq.
48-62-3060
—
48-62-3060
—
48-62-3060
—
Tamper Plate
Compacts dirt, tamping
asphalt.
Rentals
Part No.
3/4" Hex
Use with: 5335, 5337
Use with: 5347, 5348,
5316, 5318, 5336, 5321
48-62-4075
Bull Point - Starts
holes in concrete
slabs, general chipping
and breaking
330
Use with: 5313, 5346,
5314, 5337 & 5315
3/4" Hex With
21/32" Round
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SpeediCut Cut-Off Saws
SC7312
SC7314
SC8116
Engine Displacement
4.5
4.5
4.9
Maximum Horsepower
5.6
5.6
6.2
No Load RPM
9,350 RPM
9,350 RPM
9,350 RPM
Max. Spindle Speed
4,300 RPM
4,300 RPM
3,750 RPM
Maximum torque
6.75 ft./lbs. 6.75 ft./lbs.
5.2 ft./lbs.
Carburetor
Tools
SpeediCut Saw Specifications
Model Number
Pipe
Hangers
Threaded
Rod
Strut
Anchors
Segmented Dry High Speed Blades - 10" Through 20" Diameter
Fasteners
Cut-Off Saws / High Speed Blades
Compensating fixed jet
Ignition System
Electronic speed controlled
Recoil Starter
Clutch
Abrasives
Starter System
Auto Centrifugal
Fuel Mixture
50:1 (fuel/2-stroke oil)
Fuel Tank Capacity
37 oz.
Fuel consumption at max. load
Blade Capacity
.55 g/h
.55 g/h
2.3 g/h
12"
14"
16"
Weight (tanks empty w/o blade)
4-13/16"
5-3/4"
4300
4300
3750
21 lbs.
21 lbs.
23.4 lbs.
WARNING: Operating the blade faster than the manufacturer’s maximum safe speed can damage the blade and possibly cause injury.
Part No.
Part No.
Description
Description
75753
Tool Kit (incl: Pouch, Universal wrench, torx wrench
and screwdriver)
46799
20 mm to 1" Arbor Adapter
52270
Wheel Kit (mounts on bottom of saw)
46903
Flat Saw Dolly with Water Tank - must be ordered
with P/N 46929 if water tank is used.
6060065
Filter (Foam)
46929
Water Attachment Kit (standard)
6060064
Filter (Paper)
01381
Quick Connect for Water Kit (fits standard garden hose)
6060165
Starter Rope
6060127
Spark Plug
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Max Blade Shaft RPM
3-13/16"
OnSite
Supply
1"/20mm Universal Arbor
Maximum Cutting Depth
331
Rentals
Arbor Diameter
Fasteners
Magnetic Base Portable Drills
Anchors
Portable Drills
Model for Model - The Best
Value and Productivity Available
Model No. 115
HMD115
Strut
The HMD115 is an ultra low profile, lightweight 21
lb. drill with a quill feed arbor. Handles operate from
either side and with handles removed, the hex head
allows use of a socket wrench for ratcheting the feed.
Handles lock for carrying. The arbor has a bayonet-style
twist and lock tool mounting for quick cutters change
outs. The HMD115 uses Rotaloc™ Annular Cutters. For
safety, the motor switch must be continuously pressed
during operation and the motor will not run without the
magnet switch "ON". Rear mounted controls optimize
ergonomics. Convenient carrying case and safety strap is
standard. The HMD111 is the 230V version.
Electrical Rating
115V
60 Hz
8.0 Amp
No Load RPM
450
Hole
Capacity
1/2" - 1-1/16"
Diameter
Depth
3/4"
Arbor Bore
Quick Shank
Dimensions
Height
6-11/16"
Width
8-1/2"
Length
11-5/8"
Threaded
Rod
Base Size
4" x 7"
Net Weight (approx.)
21.3 lb
Model No. 904
HMD904
Electrical Rating
Pipe
Hangers
We’ve kept several important attributes of the
HMD904’s predecessor and made it better because:
• It has a new, more powerful motor so you can drill
large holes without stalling deep in the cut
• The cost of motor wear replacement parts has been
lowered by 1/3 over the old style motor
• The new magnetic design increases the drill point
breakaway to 820 lb
• New ergonomic handles improve operator efficiency
The HMD904 can be converted into a portable machine
shop with Hougen’s variety of accessories and uses
Rotabroach "12,000-Series" Cutters. The HMD908 is the
230V version.
No Load RPM
Hole
Capacity
230V
120V
60 Hz
60 Hz
7.2 Amp 4.0 Amp
7/16 - 1-1/2
Depth
2
Arbor Bore
3/4
Dimensions
Height
16-7/16
Width
7-3/16
Length
Base Size
8-1/4
3-1/8 x 6-9/16
Tools
Net Weight (approx)
27.5 lb
Shipping Weight
38.1 lb
Model No. 505
HMD505
Electrical Rating
Abrasives
The two-speed Model HMD505 with quill feed design
eliminates gib adjustments and arbor support brackets/
spacers for maintenance free operation and fast, smooth
feed into and throughout the cut especially in deep hole
drilling. Optional pressurized coolant system aids drilling
in horizontal positions and feed handles can be switched
to either side without tools. Rear positioned controls
for accessibility and convenience. Coolant bottle and
carrying handle removes leaving drill only 15" high. Uses
Rotabroach "12,000-Series" Cutters. The HMD501 is the
230V version.
No Load RPM
Hole
Capacity
120V
230V
60 Hz
60 Hz
14 Amp 7.0 Amp
7/16 - 2-3/8
Depth
3
Arbor Bore
Dimensions
OnSite
Supply
Slick-Stick™ Lubricant & Rotomagic™ Cutting Fluid
Safety
Rentals
Slick-Stik™ is softer than other stick lubricants for easy application, superior
adhesion to the tool, assuring thorough coverage. Use with ferrous or non-ferrous
materials. RotaMagic™ Concentrated Cutting Fluid is water soluble and yields a
10:1 ratio when mixed with water. (Biodegradable)
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
450
250
Dia.
3/4
Height
20
Width
4-3/4
Length
10-3/4
Base Size
4x8
Net Weight (approx)
332
450
450
Dia.
45.05 lb
Description
Part No.
11741-12
(12) 1 Pint Bottles - makes 1 pint
each, 12 pints total
11742-4
(4) 1 Gallon Bottles - makes 11
gallons each, 44 gallons total
11743
(1) 5 Gallon Pail - makes 55
gallons total
11745-6
(6) 16 oz. Slick-Stik™ Lubricant
11746-12
(12) 1.68 oz. Slick-Stik™ Lubricant
11746-24
(24) 1.68 oz. Slick-Stik™ Lubricant
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
HMD914
The HMD914 is the long standing
powerful and versatile workhorse
that offers a built in 16 oz. gravity
feed coolant bottle. This model powers through holes up to 2-1/16" diameter and 3" deep without bogging
down. Making the drill even better
is the many accessories available.
Hougen® safety features include the
lift detector, and the no adjustment
safety switch. LED indicator is built
in to the control panel. Equipped
with positive slug ejection. HMD909
is 230V model.
HMD925 Specifications
Electrical System
Motor
Pipe
Hangers
HMD914 Specifications
120V, 50/60 Hz
8A, 960W
Electrical System
7.2A, 450 RPM
Motor
120V, 50/60 Hz
11.2A, 1344W
10.5A, 350 RPM
Manual
Capacity
Dia.
Depth
7/16" - 1-1/4" (12mm - 32mm)
2" (50mm)
Hole
Capacity
Power
Feed
Capacity
Dia.
Depth
7/16" - 1-1/4" (12mm - 32mm)
2" (50mm)
Cutter / Mount
Rotabroach "12,000" Series
3/4" Shank
Dimensions
20-1/2" H X 8-3/16" W x 13-3/4" L
Magnet
Magnet
17-1/8" H X 10-13/16" W x 11-3/16" L
Base
3-1/8" W x 6-9/16" L
Strength
1" Plate
Dead Lift
1680 lb
Drillpoint Breakaway 900 lb
3/8"
Plate
1124 lb
741 lb
Net Weight
Shipping Weight
Philadelphia, PA
610-647-8070
7/16" - 2-1/16" (12mm - 52mm)
3" (76mm)
Base
3-1/2" W x 7" L
Strength
1" Plate
Dead Lift
2500 lb
Drillpoint Breakaway 1065 lb
3/8"
Plate
1400 lb
880 lb
Net Weight
44 lb
Shipping Weight
Safety
Dimensions
Rotabroach "12,000" Series
3/4" Shank
Dia.
Depth
53.3 lb
37 lb
Approx 47 lb
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
333
Rentals
Cutter / Mount
Tools
HMD914K Fabricator's Kit
Includes HMD914 w/ Carrying Case, Jacobs®
Chuck, Adapter, & 12002 Rotabroach® Cutter Kit
Abrasives
New Improved
Control Panel!
Variety of
Accessories
Variety of
Available
Accessories Available
OnSite
Supply
Take the effort out of holemaking
with the power feed HMD925.
With exceptional performance
and reliability, it uses Rotabroach® Annular Cutters to
produce holes from 7/16" to
1-1/4" diameter thru materials up to 2" thick in power feed
mode. The HMD925 is compact
and lightweight at only 37 lbs.
The HMD925 incorporates smart
technology that monitors and
adjusts the self-feed action to
continuously maintain optimum
drilling performance throughout
the cut, providing consistent
productivity, long tool life and
excellent hole quality. HMD928
is 230V model.
Threaded
Rod
Strut
Anchors
HMD925 POWER FEED
Fasteners
Magnetic Base Portable Drills
Fasteners
Rotabroach® Cutters
"12,000 Series" Cutters
Part No. / Depth of Cut
Cutters
Cutter Dia.
Decimal Equiv.
1"
2"
3"
Anchors
3/4” Diameter Shank Cutters - Use with Pilot 10531 or 10532
7/16"
"12,000-Series" Cutter Kit
.4375
12114
12214
—
3/4” Diameter Shank Cutters - Use with Pilot 10533 or 10534
"12,000-Series" Cutter Kits keep five of the
most popular cutters protected and handy
1/2"
.5000
12116
12216
—
9/16"
.5625
12118
12218
—
5/8"
.6250
12120
12220
—
.6875
12122
12222
—
Strut
11/16"
3/4” Diameter Shank Cutters - Use with Pilot 10527,10528 or 3-10528
Threaded
Rod
Part No.
.7500
12124
12224
3-12224
13/16"
.8125
12126
12226
3-12226
7/8"
.8750
12128
12228
3-12228
15/16"
Description
12001
3/4"
Rotabroach "12,000-Series" Kit for
1" D.O.C. - contains (2) pilots, (2)
wrenches and five cutters (9/16",
11/16", 13/16", 15/16" and 1-1/6") in
plastic case.
Pipe
Hangers
.9375
12130
12230
3-12230
1"
1.0000
12132
12232
3-12232
1-1/16"
1.0625
12134
12234
3-12234
1-1/8"
1.1250
12136
12236
3-12236
1-3/16"
1.1875
12138
12238
3-12238
1-1/4"
1.2500
12140
12240
3-12240
1.3125
12142
12242
3-12242
12002
Rotabroach "12,000-Series" Kit for
2" D.O.C. - contains (2) pilots,
(2) wrenches and five cutters
1-5/16"
(9/16", 11/16", 13/16", 15/16" and
1-3/8"
1.3750
12144
12244
3-12244
1-1/6") in plastic case.
1-7/16"
1.4375
12146
12246
3-12246
1-1/2"
1.5000
12148
12248
3-12248
1-9/16"
1.5625
12150
12250
3-12250
1-5/8"
1.6250
12152
12252
3-12252
1-11/16"
1.6875
12154
12254
3-12254
1-3/4"
1.7500
12156
12256
3-12256
1-13/16"
1.8125
12158
12258
3-12258
1-7/8"
1.8750
12160
12260
3-12260
1-15/16"
1.9375
12162
12262
3-12262
2"
2.0000
12164
12264
3-12264
2-1/16"
1.0625
—
12266
—
Part No.
Material Thickness
1"
2"
3"
Tools
10531
10533
10527
—
For use
with Cutter
Diameters
10532
—
7/16" and 12 mm
10534
—
1/2" - 11/16" and
13 - 18 mm
10528 3-10528 3/4" - 2-1/16" and
19 - 51 mm
—
Rail Drill only
40588
Abrasives
Note: Cutters are also available in Metric
Sizes - Call for Sizes
Hougen Cutter Comparison Chart
OnSite
Supply
Safety
Rentals
Tool
Series:
RotaCut™
Extended
Reach
Holcutter™
Carbide
Holcutter™
RotaLoc™
RotaLoc
Plus™
Rotabroach®
Copperhead™
42/43,000
Diameter
Range
Min. / Max.
1/4" to
1-1/2"
3/8" to
9/16"
11/16"
to 3"
11/16" to 3"
1/2" to
1-1/16"
w/ stack
geometry
1/2" to
1-3/8"
7/16" to
2-3/8"
9/16" to
1-1/2"
3/4" to
3-1/16"
Max. Depth
of Cut
1/4" to 1/2"
1/4"
1/8"
1/8"
3/4"
1"
1", 2", or 3"
2"
2" or 3"
Mounting
3/8" or 1/2"
Triple Flat
Shank
3/8"
Triple Flat
Shank
3/8"
Triple Flat
Shank
3/8" or 1/2"
Triple Flat
Shank
Bayonet
Style
Bayonet
Style
3/4"
Double
Flat Shank
3/4"
Double
Flat Shank
3/4" Weldon
or
1-1/4" Weldon
334
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
M-2 Drill Rig
M-4 Drill Rig
M-2 Complete Combination Rig
New Lighter
Base & Carriage
Threaded
Rod
Pipe
Hangers
1/2
3
14
5/8
3-1/4
16
1
2-3/4
6-1/2
3/4
3-1/2
18
1-1/8
3
7
1
2-1/4
5
7/8
4
20
1-1/4
3-1/4
8
1-1/8
2-1/2
5-1/2
1
4-1/4
24
1-3/8
3-1/2
9
1-1/4
2-3/4
6
1-1/8
4-1/2
26
1-1/2
4
10
1-3/8
3
6-1/4
1-1/4
5
28
1-5/8
4-1/4
12
1-1/2
3-1/4
6-1/2
1-3/8
5-1/2
30
1-3/4
4-1/2
14
1-5/8
3-1/2
7
1-1/2
6
32
1-7/8
5
16
1-3/4
4
8
1-5/8
6-1/4
34
2
5-1/2
18
1-7/8
4-1/4
9
1-3/4
6-1/2
36
2-1/4
6
20
2
4-1/2
10
1-7/8
7
38
2-1/2
6-1/4
24
2
8
40
2-1/4
9
42
2-1/2
10
44
2-3/4
12
46
The Premium Black bit is the industry
standard. Its very high diamond
concentration gives maximum footage
and drilling speed. Designed for all types
of wet drilling. Good in moderate to high
steel applications. Choose Premium Black
for your lowest total drilling cost.
Our most popular bit. High diamond
concentration for excellent footage and
cutting speed. For all types of wet drilling
in applications with light to moderate
steel, Go with Heavy Duty Orange for the
best general purpose bit on the market
Specifications:
H33F - Hard Aggregate
HOL - General Purpose, Fast Cutting
H64L - Asphalt/Block, long life
Specifications:
P33F - Hard aggregate
POL - General purpose, fast cutting
P64L - Asphalt/Block, long life
Washington D.C.
877-419-2755
Popular general purpose bit because
of its continuous crown design which
works well in applications with prestressed cable, loose rebar and loose
wire mesh.
Paragon Products
Hole In One Cover
•
•
•
•
•
•
•
Boston , MA
800-645-6155
Resuable / Portable
Prevents accidents and injuries
Prevents OSHA citations
No sawing, predrilling or bolting
into concrete necessary
Safety orange color
Assembly hardware included
Assembles and removes in
seconds
Hartford, CT
800-969-0285
335
Abrasives
Tools
Stock Sizes (Inches)
OnSite
Supply
48
Stock Sizes (Inches)
Safety
Stock Sizes (Inches)
Impregnated
Yellow
Heavy Duty
Orange
Rentals
Premium Black
Strut
• Complete rigs include:
Combo anchor/vacuum/
angle base, mast, carriage,
vacuum, pump motor
mount plate and your
choice of motor.
• 6" bit capacity
(3" handheld)
• 600/1200 RPM
• Slip clutch safety override
Dual switch/outlet control
panel and amp meter
4 spoke handle, 6" wheels
2-1/2" square column
10" bit capacity, 14" with 1 spacer
Accepts bits 22" overall
20 amp Milwaukee motor
600/1200 RPM
Slip clutch safety overide
Philadelphia, PA
610-647-8070
Fasteners
3 Speed, Very Powerful
"The #1 Drill Rig in America"
•
•
•
•
•
•
•
•
M-4
Complete
Combination
Rig
Ultra-light rig
weighs only 20 lbs.
Motor weighs only
15 lbs.
Anchors
Diamond core drill rigs / core bits
Fasteners
Diamond Coring Rigs & Motors
Diamond Drilling Rigs
Diamond Coring Motors
Anchors
Shear Pin Models - 4090 / 4079 /
4094 - 120V AC
Clutch Models - 4092-20 /
4097-20 / 4004 / 4096 / 4005 120V AC
4136
Vac-u-Rig® Diamond Coring Rig
Less Dymodrill Motor and
Dymobit (Diamond Bit)
Strut
4130
Dymo-Rig Diamond Drilling
Rig - Large Base-Stand Only
Two speed Dymodrill Motors for use with Vac-U-Rig®
and Dymorig Diamond Core Rigs
For diamond coring in reinforced
concrete, tile, masonry or natural stone.
For use with dymo drill motors.
• Triple reduction gearing on all models
• Built-in water swivel on all models
• All ball and roller bearings
Exclusive 4136 Features
Shear Pin Protection
Threaded
Rod
• Includes large base with wheels and
four leveling screws, adjustable tilting
column, cradle for motor mounting, four
spoke wheel feed control, bubble level
and jack screw
• Base can be floor or wall mounted - use
a bolt type anchor
• Column will accept small base assembly
No. 48-10-0080
Protects gears and motor against overload. Shear pins easily
replaced. Extra pins included with each unit.
Clutch Protection
Protects gears and motor against overload. Set to specifications
at factory, no adjustment necessary.
Pipe
Hangers
4130 Features
• The large base can be floor or wall mounted with a bolt type
anchor or braced from the ceiling with a telescoping assembly
No. 48-95-1000 by using the jack screw
• Base can be replaced with a No. 48-10-0080 small base - or
used with Vac-U-Rig attachment kit No. 49-22-7075 to convert
the 4130 into 4136 Vac-U-Rig
• Order meter box separately
Tools
Part No.
4136
4130
Column Ht.
Net Wt. (lb)
Ship Wt. (lb)
47
47
106
82.5
129
103.5
Abrasives
Contractor Series Base Stands
for Drilling Rigs
4115
Small Base Stand only
OnSite
Supply
4120
Large Base Coring Stand with
Vacuum Base
4120-22
Contractor Plus Series
Large Base Stand (4120) with Vac-U-Pump
Assembly (49-50-0200), Meter Box
(48-51-0120) and Model 4096 Diamond
Coring Motor
Safety
4115-22
Contractor Plus Series
Small Base Stand (4115) with Vac-U-Pump Assembly
(49-50-0200), Vacuum Pad Assembly (49-50-7100), Meter
Box (48-51-0120) and Model 4096 Diamond Coring Motor
Rentals
336
Hartford, CT
800-969-0285
15 Amp Models
Part
No.
Amp* Spindle
4090
15
4092-20 15
4097-20 15
1-1/4 - 7
1-1/4 - 7
1-1/4 - 7
rpm
375
750
375
750
500
1000
Sugg. Dia.
Net Ship
in Medium Wt. Wt.
Aggregate (in) (lb) (lb)
5 - 8
26
2-1/2 - 5
26
5 - 8
2-1/2 - 5
3-5
26
1-1/4 - 3
30
30
30
*Cord equipped with 20 amp Twist Lock Plug; NEMA plug
type L5-20P
20 Amp Models
Part
No.
4079
4004
4094
4096
4005
Amp * Spindle
20
20
20
20
20
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
- 7
- 7
- 7
- 7
- 7
rpm
300
600
300
600
450
900
450
900
600
1200
Sugg. Dia.
Net Ship
in Medium
Wt. Wt.
Aggregate (in) (lb) (lb)
7 - 14
4 - 7
7 - 14
4-7
6 - 10
2-6
6 -10
2-6
4 - 7
3/4 - 4
24
31
24
31
24
31
24
31
24
31
*Cord equipped with 20 amp Twist Lock Plug; NEMA plug
type L5-20P
A big word about our service - DEPENDABLE
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Diamond Coring Accessories
Supplied with No. 4136. Ammeter and power
switch on front panel receptacle for motor’s plug.
One outlet also located on back of unit.
48-51-0120
20 Amp 120 Volt
Supplied with No. 4115-22, and 4120-22. Also
available as an accessory. Ammeter and power
switch on front panel with single 20 amp twist
lock receptacle for drill motor’s plug.
Large Base Assembly
48-10-0090
Large base is included with
No. 4130 and 4136. Can be
used with No. 4125 for greater
support. Includes two wheels and
four leveling screws.
Part No.
Base Dimensions
Net Weight
Ship. Weight
48-10-0090
13-1/4” x 17-1/8”
(less wheels)
33.5 lb
37.5 lb
Strut
48-51-0100*
30 Amp 120 Volt
Anchors
Meter Boxes
*Not available in Canada
Shipping Weight
48-51-0100
48-51-0120
4.8 lb
3.8 lb
6 lb
5.3 lb
Vacuum Pad Assembly (Single Pad)
49-22-7100
For use with models with detachable
vacuum pads 4115, 41125, 4130 and
4136. Single vacuum pad which provides
approximately 1800 lb of holding force.
Same as supplied with
No. 4136 Vac-U-Rig®, 4115-22 and
4120-22.
49-22-7100
8.8 lb
13 lb
Water Tank
49-76-0055
3-1/2 gallon heavy-duty, impact resistant poly
tank. For use where a regular tap water supply is
not available.
4 lb
Base Dimensions
Net Weight
Ship. Weight
7-1/4” x 13”
(less wheels)
22 lb
26 lb
48-70-0060
For use where water flow from drilling
operation must be trapped and
drained. Dike-type collector ring holds
water for fast disposal when used with
bits up to 10” in diameter. A built-in
vacuum hose fitting permits use with a
wet or dry vacuum cleaner.
Part No.
Shipping Weight
48-70-0060
8.8 lb
Tools
Shipping Weight
49-76-0055
Part No.
48-10-0080
Abrasives
Net Weight
Shipping Weight
Small base is included with
No. 4125 and can be used with
No. 4130 and 4136. Works well
in restricted areas. Includes two
wheels and four leveling screws.
Water Collecting Ring
Part No.
Part No.
Small Base Assembly
48-10-0080
Threaded
Rod
Net Weight
Water Collecting Gasket
Vacuum Pump
Assembly
49-50-0200
Heavy -duty 1/3 H.P. pump complete
with vacuum gauge, air filter, air hose
and cord. May be mounted to base
of unit if desired. Same as furnished
with No. 4115-22 and 4120-22. Can
be used with No. 4120 and 4136.
Recommended only for single pad
use.
Part No.
Description
48-70-0660
Replacement gasket for 48-70-0060
OnSite
Supply
48-70-0660
115 Volt
8 foot water hose with standard brass male and female water
hose fittings.
Part No.
Net Weight
Shipping Weight
Part No.
Description
Shipping Weight
19.5 lb
26.5 lb
48-18-0055
5/8” I.D. x 8’
1.8 lb
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
337
Rentals
48-18-0055
Safety
Water Hose
49-50-0200
Philadelphia, PA
610-647-8070
Pipe
Hangers
Part No.
Fasteners
Hand-Held / Dry Diamond Coring Equipment
Anchors
WEKA DK13 Hand
Held Core Drill
(110 Volt)
Drill wet or dry thanks to a special
sealing system that allows the
combination of water cooling or
dust removal. Make the switch with
a simple change of the vacuum or
water adapter.
CB500-HH
Strut
CB500-HH Hand-Held Core Drill
Low-Cost Hand-Held Drilling
The heavy-duty core drill at a light-duty price. Perfect for drilling
small diameter holes.
Threaded
Rod
• Up to 3" drilling capacity (hand-held or with rig stand).
• Works with Diamond Products M4 stand (See page 335).
• 1300 Watt, 115V electric motor.
• Two-speed gear box (1100 rpm and 2200 rpm).
• Includes: water hose connection for wet drilling, shoulder brace
for increased stability, 5/8-11 threaded spindle, 5/8-11 to 1.250-7
adapter, side handle, crescent wrench and carrying case..
Part No.
Description
CB500-HH
Hand-Held Core Drill
Pipe
Hangers
Heavy Duty Dry
Diamond Hole
Saws
• Lightweight (15 lbs.) hand held or drill stand mountable
• 6” bit capacity (3” hand held, ideal for thin wall bits).
• Convenient carrying case.
• 2 bubble levels for straight drilling.
• 3-speed (580/1400/2900 loaded rpm) 110V, 14 amp electric
motor with slip clutch and over load switch.
• Soft start improves ease of operation and reduces circuit
breaker trips at start-up.
Part No.
Dry Diamond Vacuum Bits
Designed for drilling dry in cured concrete (without
rebar), brick, and block. Run on standard core drill
motors or high speed grinders. This bit takes up
where the Dry Hole Saw leaves off.
• Do not use in applications with steel heavier than
wire mesh.
• Use with DVH Cured Concrete, Brick
• All bits have 1.250"-12 threads.
• All bits have 9" drilling depth.
Tools
Drill dry through block and soft brick in seconds. No
water needed on the job making drilling and cleanup
easier.
Abrasives
• Not appropriate for all types of brick and block
- Please consult factory. Not suitable for hard
concrete or materials.
• All bits have 5/8" - 11 threads, 9" drilling depth
• Jacobs Chuck Adapt available for hammer drills:
5/8” - 11 thread to straight shank.
OnSite
Supply
Safety
Rentals
338
Description
WEKA DK13 Hand-Held Core Drill
Dry Vacuum Swivel Must Be Used With This Bit
5/8"-11 to 1.250-12 Vacuum Swivel Assembly
Part # - 4400125
Diameter
Part No.
Min/Max RPM
1"
04706
2300/6000
1-1/4"
04711
2300/6000
Diameter
Part No.
Min/Max RPM
1-1/2"
04717
1600/5000
1-1/2"
04775
1600/5000
1-3/4
04720
1600/5000
1-3/4
04777
1600/5000
2"
00011
1200/5000
2"
04780
1600/5000
2-1/4"
04727
1200/5000
2-1/4"
04782
1600/5000
2-1/2"
00012
1200/5000
2-1/2"
04785
1600/5000
3"
00013
800/5000
3"
04789
800/5000
3-1/2"
00014
800/5000
3-1/2"
04793
800/5000
4"
04745
700/5000
4"
04796
700/5000
4-1/2"
04751
700/5000
4-1/2"
04799
700/5000
5"
04756
700/2500
5"
04802
700/2500
6"
04764
600/2500
6"
04805
700/2500
Hartford, CT
800-969-0285
Swivel Extension
Part # - 4400126
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
5194
5196
4.5 Amp Die Grinder
11 Amp Die Grinder
• 4.5 amp, 21,000 rpm.
• For mounted wheels and points up to
1-5/8 in., reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench.
• 4.5 amp, 21,000 rpm.
• For mounted wheels and points up to
1-5/8 in., reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench.
• 11 amp, 14,500 rpm.
• For mounted wheels and points up to 2 in.,
reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench, 1 in Open End Wrench.
Specifications
120 V AC
4.5 Amps
21,000 rpm
Toggle
1/4"
Yes
4.5 lbs.
Volts:
Amps:
No-Load Speed:
Switch:
Collet Dia.:
Spindle Lock:
Weight:
Specifications
120 V AC
4.5 Amps
21,000 rpm
Paddle
1/4"
Yes
4.5 lbs.
Volts:
Amps:
No-Load Speed:
Switch:
Collet Dia.:
Spindle Lock:
Weight:
120 V AC
11.0 Amps
14,500 rpm
Trigger
1/4"
Yes
7.8 lbs.
Part No.
Description
Part No.
Description
Part No.
Description
5192
4.5 Amp Die Grinder
5194
4.8 Amp Die Grinder
5196
11 Amp Die Grinder
DW887
DW888
Pipe
Hangers
Volts:
Amps:
No-Load Speed:
Switch:
Collet Dia.:
Spindle Lock:
Weight:
Tungsten Carbide Burs
Tools
Specifications
Threaded
Rod
4.5 Amp Die Grinder
Strut
Anchors
5192
Fasteners
Corded Die Grinders
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle Thread:
Weight:
Part No.
DW887
120 V AC
3.0 Amps
350 W
25,000 rpm
Trigger
1/4" collet/1/8" sleeve
3.25 lbs.
Description
3 Amp, 1-1/2" Die Grinder
• AC/DC capacity works off welding machines and generators.
• External brush caps for easy servicing.
• Convenient paddle switch with lock-on
button for easy gripping.
• Precision 1/4" collet with 1/8" reducing
sleeve securely holds all proper accessories.
• Includes: 2 wrenches, 1/4" collet, 1/8"
reducing sleeve.
Benefits
• Long life and durability
• Delivers vibration-free operation
• Produces very sharp uniform cutting
edges
• Permanent storage to prevent damage
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle Thread:
Weight:
Part No.
DW888
120 V AC
5.0 Amps
485 W
29,000 rpm
Trigger
1/4" collet/1/8" sleeve
6.0 lbs.
SA SC SD SE
Description
3 Amp, 1-1/2" Die Grinder
SF SG SL SM
Philadelphia, PA
610-647-8070
OnSite
Supply
Specifications
Heavy Duty, 5 Amp
2" Die Grinder
Safety
• AC/DC capacity works off welding machines and generators.
• Convenient paddle switch with lock-on
button for easy gripping.
• Precision 1/4" collet with 1/8" reducing
sleeve securely holds all proper accessories.
• Includes: 2 wrenches, 1/4" collet, 1/8"
reducing sleeve.
• Tungsten carbide construction
• Highest quality manufacturing methods
• Precision ground with diamond wheels
• Each enclosed in individual plastic
capsule
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
339
Rentals
Heavy Duty, 3 Amp
1-1/2" Die Grinder
Abrasives
Features
Fasteners
Corded Small Angle Grinders
6101-6
Anchors
5.5 Amp Bandfile
Strut
6140-33
• 5.5 amp, 2,300 SFPM, AC only.
• 1/2 inch x 18 inch Contact Arm.
• 180° adjustable head.
• 3 position side handle.
• Includes Side handle & 1/2" arm, Belt:
1/2 x 18 Aluminum Oxide 240 Grit (10
per pack).
Specifications
Threaded
Rod
Volts:
Amps:
Capacity:
No-Load Speed:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
120 V AC
5.5 Amps
1/2" x 18"
2,300 fpm
Paddle
5/8"-11
No
6.0 lbs.
Part No.
Description
6101-6
5.5 Amp Bandfile
6140-30
7 Amp 4-1/2" Small Angle Grinder
7.5 Amp 4-1/2" Small Angle Grinder
• Stronger, 7.0 Amp, 775 MWO motor
• 25% longer lasting epoxy protection extends motor life by protecting the
copper wire from abrasion
• Debris Baffles
• Multi-Port Exhaust
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
• Stronger, 7.5 Amp, 825 MWO motor
• X-Large Paddle Switch
• 25% Longer Lasting Epoxy Protection extends motor life by protecting the
copper wire from abrasion
• Debris Baffles
• Multi-Port Exhaust
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Pipe
Hangers
Part No.
6140-33
120 V AC
7.0 Amps
775 MWO
10,000 rpm
Slide w/Lock-on
5/8"-11
Yes
5.0 lbs.
Description
4-1/2" Grinder, Slide Switch
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
6140-30
120 V AC
7.5 Amps
825 MWO
10,000 rpm
Paddle w/Lock-on
5/8"-11
Yes
5.0 lbs.
Description
4-1/2" Grinder, Paddle Switch
Tools
D28110
1810PS
BOSCH
8 Amp 4-1/2" Small Angle Grinder
Abrasives
7 Amp 4-1/2" Small Angle Grinder
OnSite
Supply
• Quick-change wheel release.
• Low profile jam-pot gear case.
• Oversized, protected spindle lock button.
• 2-position removable side handle.
• 5/8"-11 spindle thread.
• Includes: 2-position side handle, depressed center wheel, keyless adjustable
guard, wrench.
Specifications
Safety
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
120 V AC
7.0 Amps
800 W
11,000 rpm
5/8"-11
Yes
4.1 lbs.
Description
D28110
4-1/2" Small Angle Grinder
1347A
BOSCH
6 Amp 4-1/2" Small Angle Grinder
• 1 horsepower maximum motor.
• Lock-on/off switch.
• Service Minder™ brushes.
• Precision spiral bevel gears.
• 2-Position auxiliary handle.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench
Specifications
Volts:
Amps:
No-Load Speed:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
Rentals
1347A
340
Hartford, CT
800-969-0285
120 V AC
6.0 Amps
11,000 rpm
Trigger
5/8"-11
Yes
4.6 lbs.
• 1.1 horsepower maximum motor.
• Lock-on/off paddle switch.
• Vibration Control Handle.
• Sealed switch.
• Service Minder™ brushes.
• Tool-free adjustable guard.
• Directed Air Flow.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench, abrasive wheel.
Specifications
Volts:
Amps:
No-Load Speed:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
1810PS
120 V AC
8.0 Amps
11,000 rpm
Paddle
5/8"-11
Yes
4.3 lbs.
Description
4-1/2" Small Angle Grinder
Description
4-1/2" Small Angle Grinder
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
10 Amp 4-1/2" Small Angle Grinder
• Dust Ejection System™.
• Quick-change wheel release
• Keyless adjustable guard.
• Vibration reducing removable side handle.
• Paddle switch lock-off .
• Includes: 2-position side handle, keyless,
adjustable guard, wrench
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Use Wheels >RPM:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
Description
• Stronger 10.0 Amp, 1250 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6148-31)
• Debris Baffles
• Multi-Port Exhaust
• 25% Longer Lasting Epoxy Protectionextends motor life by protecting the
copper wire from abrasion
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges, contractor's bag.
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
6148-33
120 V AC
10 Amps
1250 MWO
10,000 rpm
Slide w/Lock-on
5/8"-11
Yes
5.5 lbs.
Specifications
Description
4-1/2" Grinder, Paddle Switch
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
6148-30
4-1/2" Small Angle Grinder
120 V AC
10 Amps
1250 MWO
10,000 rpm
Paddle w/Lock-on
5/8"-11
Yes
5.5 lbs.
Description
Fasteners
Anchors
10 Amp 4-1/2" Small Angle Grinder
• Stronger 10.0 Amp, 1250 MWO Motor
• Slide switch with Lock-on
• Debris Baffles
• Multi-Port Exhaust
• 25% Longer Lasting Epoxy Protectionextends motor life by protecting the
copper wire from abrasion
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
4-1/2" Grinder, Paddle Switch
Tools
D28402
120 V AC
10.0 Amps
1,200 W
11,000 rpm
12,000 rpm
Paddle w/ Lock-off
5/8"-11
Yes
4.6 lbs.
10 Amp 4-1/2" Small Angle Grinder
Strut
D28402
6148-30
Threaded
Rod
6148-33
Pipe
Hangers
Corded Small Angle Grinders
6122-30
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
D28112
120 V AC
7.0 Amps
800 W
11,000 rpm
Slide w/ Lock-off
5/8"-11
Yes
4.1lbs.
Description
4-1/2" Small Angle Grinder
Philadelphia, PA
610-647-8070
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
Washington D.C.
877-419-2755
6122-30
6122-31
120 V AC
10 Amps
1250 MWO
10,000 rpm
Trigger
5/8"-11
Yes
7.4 lbs.
Description
4-1/2" Grinder, Trigger Switch
w/ Lock-on
4-1/2" Grinder, Trigger Switch
w/o Lock-on
Boston , MA
800-645-6155
Abrasives
Type 27 Depressed Center
.045 Cutting Wheels
• Unique thin Type 27 shape can be used
on all right angle grinders.
• Aluminum Oxide offers the fastest cutting, longest lasting thin wheels.
• SAI22011 rated to 19,000 max rpm
SAI22021 rated to 13,300 max rpm
• Externally reinforced with fiberglass layers
to provide ultimate safety in a thin wheel.
• Packaged 50/box.
• Use for ferrous and/or non-ferrous metals.
(Sold in full box quantities only)
Part No.
SAI22011
SAI22021
Hartford, CT
800-969-0285
Description
4"x .045" x 5/8"
4½"x .045" x 7/8"
341
OnSite
Supply
• Dust Ejection System™.
• Quick-change wheel release
• Keyless adjustable guard.
• Vibration reducing removable side handle.
• Oversized, protected spindle lock button.
• Slide switch lock-off .
• Includes: 2-position side handle, keyless,
adjustable guard, wrench
• Stronger 10.0 Amp, 1250 MWO Motor
• 3-Position Trigger Grip Handle with Soft
Grip for optimum control, with or without lock-on.
• Debris Baffles
• External Brush Doors - reduces service time
• Tool Free, Burst Resistant Guard- quickly
adjust the guard without a tool
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges
Safety
10 Amp 4-1/2" Small Angle Grinder
10 Amp 4-1/2" Small Angle Grinder
Rentals
D28112
Fasteners
Corded Small Angle Grinders
Anchors
6116-30
1181PSD
Strut
Threaded
Rod
BOSCH
9 Amp 5" Small Angle Grinder
12 Amp 4-1/2"/5" Small Angle
Grinder - w/ Paddle Switch
• 1.1 horsepower maximum motor.
• Vibration Control Handle.
• AC/DC capability.
• Sealed switch.
• Service Minder™ brushes.
• Epoxy Coated Field Windings.
• Tool-free adjustable guard.
• Directed Air Flow.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench, abrasive wheel.
• Stronger 12.0 Amp, 1490 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6116-31)
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 4-1/2" & 5" Type 27 Guard Included
• Includes side handle, 4-1/2" and 5" Type
27 guards, spanner wrench, flanges.
Specifications
Pipe
Hangers
120 V AC
9.0 Amps
11,000 rpm
Paddle
5/8"-11
Yes
4.8 lbs.
Volts:
Amps:
No-Load Speed:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
Specifications
Description
1811PSD 5" Small Angle Grinder
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
Tools
6116-30
6116-31
120 V AC
10 Amps
1250 MWO
10,000 rpm
Paddle
5/8"-11
Yes
5.7 lbs.
Abrasives
OnSite
Supply
• Aluminum Oxide grain.
• A24N for fast stock removal on Ferrous
Metals and Low Grade Stainless Steel.
• A24R for general purpose grinding and
long life on Ferrous Metals.
• 4½" wheels are rated to 13,300 max rpm;
7" wheels are rated to 8,500 max rpm.
(Sold in full box quantities only)
Safety
Part
No.
• Same specifications as 6116-30 (see
above)
• Features slide switch
6116-33
Description
4-1/2 / 5" Grinder, Slide
Switch
Box
Dia. Width Bore Grade Qty
Rentals
SAI20060 4½"
SAI20063 4½"
SAI20160 4½"
SAI20163 4½"
SAI20085 7"
SAI20086 7"
342
12 Amp 4-1/2/5" Small Angle
Grinder - w/ Slide Switch
Part No.
¼"
¼"
¼"
¼"
¼"
¼"
7/8 A24N
7/8 A24R
58
⁄ -11 A24N
58
⁄ -11 A24R
58
⁄ -11 A24N
58
⁄ -11 A24R
25
25
10
10
10
10
Hartford, CT
800-969-0285
Grinder
12 Amp 5" Medium Angle
• High power-to-weight ratio.
• Keyless adjustable guard.
• Rear handle design.
• External brush doors for easy servicing.
• Sealed ball and roller bearings for extended motor life.
• Includes: grinding wheel, wrench, backing flange, clamp nut, keyless adjustable
guard, 2 position side handle.
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Use Wheels >RPM:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
DW831
120 V AC
12.0 Amps
1,837 W
10,000 rpm
11,000 rpm
Trigger
5/8"-11
Yes
7.4 lbs.
Description
5" Medium Angle Grinder
Description
4-1/2" Grinder, Paddle Switch
w/ Lock-On
4-1/2" Grinder, Paddle Switch
w/o Lock-On
6116-33
Type 27 Depressed Center
.045 Grinding Wheels
DW831
6123-30
12 Amp 5/6" Small Angle Grinder
w/ Trigger Grip
• Stronger 12.0 Amp, 1490 MWO Motor
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 5" and 6" Type 27 Guards included
• Includes side handle, 5" and 6" Type 27
guards, spanner wrench, flanges.
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
Boston , MA
800-645-6155
6123-30
6123-31
120 V AC
12 Amps
1490 MWO
9,000 rpm
Trigger Grip
5/8"-11
Yes
6.5 lbs.
Description
6" Cut-Off Grinder, Trigger
Grip w/ Lock-On
6" Cut-Off Grinder, Trigger
Grip w/o Lock-On
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
DW840
D28499X
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
6160-30
6160-31
120 V AC
12 Amps
1490 MWO
9,000 rpm
Paddle
5/8"-11
Yes
6.3 lbs.
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Use Wheels >RPM:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
Fasteners
Specifications
120 V AC
15.0 Amps
3,950 W
6,000 rpm
6,600 rpm
Trigger
5/8"-11
Yes
14.5 lbs.
Description
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Use Wheels >RPM:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
D28499X 7" & 9" Large Angle Grinder
DW840
120 V AC
13.0 Amps
2,250 W
8,000 rpm
8,500 rpm
Trigger
5/8"-11
Yes
8.0 lbs.
Description
7" Medium Angle Grinder
Description
6" Cut-Off Grinder, Paddle
Switch w/ Lock-On
6" Cut-Off Grinder, Paddle
Switch w/o Lock-On
6089-30
6088-30
Tools
• High power-to-weight ratio.
• Keyless adjustable guard.
• Rear handle design.
• External brush doors for easy servicing.
• Sealed ball and roller bearings for extended motor life.
• Includes: grinding wheel, wrench, backing flange, clamp nut, keyless adjustable
guard, 2 position side handle.
• 5.3 maximum horsepower motor..
• Keyless adjustable guard.
• Rotating, rear handle design.
• Low profile gearcase allows for work in
tight areas.
• 5 position side handle.
• Includes: 7" & 9" guard, 5-position side
handle.
Threaded
Rod
• Stronger 12.0 Amp, 1490 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6160-31)
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 6" Type 1 & 27 Guard Included
• Includes side handle, Type 1 and Type
27 guard, spanner wrench, flanges.
Heavy Duty, 13 Amp
7" Medium Angle Grinder
Heavy Duty, 15 Amp
7" & 9" Large Angle Grinder
Pipe
Hangers
12 Amp 6"" Cut-Off Angle Grinder
w/ Paddle Switch
Anchors
6160-30
Strut
Corded LArge Angle Grinders
Part No.
6160-33
Description
6" Cut-Off Grinder, Slide
Switch
Specifications
Volts:
Amps:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Part No.
Philadelphia, PA
610-647-8070
• 15.0 Amp, 4.2 HP Motor
• Trigger Grip with Lock-on. (Available
without Lock-on: P/N 6088-31)
• Debris Baffles.
• External Brush Doors.
• Soft-Grip Main Handle.
• Tool Free, Burst Resistant Guard.
• Includes: 7" and 9" Type 27 guards, side
handle, spanner wrench, flanges
Washington D.C.
877-419-2755
6089-30
6089-31
Specifications
120 V AC
15 Amps
6,000 rpm
Trigger
5/8"-11
Yes
13.7 lbs.
Volts:
Amps:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
Description
Part No.
7 / 9" Grinder, Trigger Grip
w/ Lock-On
7 / 9" Grinder, Trigger Grip
w/o Lock-On
Boston , MA
800-645-6155
6088-30
6088-31
Hartford, CT
800-969-0285
120 V AC
15 Amps
6,000 rpm
Trigger
5/8"-11
Yes
13.7 lbs.
Description
7 / 9" Grinder, Trigger Grip
w/ Lock-On
7 / 9" Grinder, Trigger Grip
w/o Lock-On
OnSite
Supply
• Same specifications as 6160-30 (see
above)
• Features slide switch
15 Amp 7" / 9" Large Angle Grinder
Safety
12 Amp 6" Cut Off Angle Grinder
- w/ Slide Switch
• 15.0 Amp, 4.2 HP Motor
• 9-Position Rotating Handle
• Trigger Grip with Lock-on. (Available
without Lock-on: P/N 6089-31)
• Debris Baffles.
• External Brush Doors.
• Soft-Grip Main Handle.
• Tool Free, Burst Resistant Guard.
• 7" & 9" Type 27 Guard included.
• Includes: 7" & 9" Type 27 guard,side
sandle, spanner wrench, flanges
343
Rentals
6160-33
Abrasives
15 Amp 7" / 9" Roto™ Large
Angle Grinder w/Rotating Handle
Fasteners
Corded LArge Angle Grinders
Anchors
D28493N
6065-6
Heavy Duty, 15 Amp
9" Large Angle Grinder
6072
Strut
Threaded
Rod
15 Amp 7" & 9" Sander
13 Amp 7" & 9" Sander
• 3.5 maximum horsepower motor.
• 7 inch or 9 inch capacity.
• Spiral bevel gearing for performance and
durability.
• Sander may be converted to grinder by
using the proper wheel guard.
• Includes: Side Handle, Flange, Nylon
Washer.
• 3.5 maximum horsepower motor.
• 7 inch or 9 inch capacity.
• Spiral bevel gearing for performance and
durability.
• Sander may be converted to grinder by
using the proper wheel guard.
• Includes: Side Handle, Flange, Nylon
Washer.
Specifications
Specifications
Pipe
Hangers
Volts:
Amps:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
120 V AC
15 Amps
5,000 or 6,000 rpm
Trigger
5/8"-11
Yes
12.0 lbs.
Volts:
Amps:
No-Load Speed:
Switch:
Spindle:
Spindle Lock:
Weight:
120 V AC
13 Amps
5,000 or 6,000 rpm
Trigger
5/8"-11
Yes
12.0 lbs.
Part No.
Description
Part No.
Description
6065-6
6066-6
7" & 9" Sander, 5,000 RPM
7"& 9" Sander, 6,000 RPM
6072
6078
7"& 9" Sander, 5,000 RPM
7"& 9" Sander, 6,000 RPM
Type 28 Depressed Center Grinding Wheels
Tools
A24R
Specifications
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Use Wheels >RPM:
Switch:
Spindle Thread:
Spindle Lock:
Weight:
Part No.
120 V AC
15.0 Amps
3,084 W
5,000 rpm
5,00 rpm
Trigger
5/8"-11
Yes
13.6 lbs.
Description
D28493N 9" Large Angle Grinder
Type 28 Depressed Center Cutting Wheels
A46N Aluminum (NonFerrous Metals) .045
Primary application: ferrous metals
(iron, steel, welds, etc.)
Primary application: non-ferrous
metals (aluminum,
copper, brass etc.)
• Aluminum oxide grain
• Soft bond for aggressive cutting
without loading
Abrasives
• Aluminum oxide grain
• Medium bond for longer life and
fewer wheel changes
Saitech Ultimate Performance™
A60S .045
Primary application: stainless steel
Secondary application: ferrous metals
(iron, steel, welds, etc.)
Primary application: ferrous and/
or non-ferrous metals (iron, steel,
welds, etc.)
• Special aluminum oxide grain
• Hard bond for extremely long life
• Fast, burr free cutting
OnSite
Supply
• Combines maximum material removal
with long life
• Exclusive formula with patented 3M
Cubitron grain
Saitech Ultimate Performance™
Primary application: stainless steel and other high tensile alloys
C24N
Safety
Secondary application: ferrous metals (iron, steel, welds, etc.)
• Fast cutting with long life
• Wheel can be mounted to right angle grinders with standard
Type 27 flanges
Primary application: masonry, concrete, stone, brick
• Silicon carbide grain
• Soft bond for fast stock removal
Rentals
Size
Dia. Width Bore
Max.
RPM
A24R
Grade
C24N
Saitech
7
7
9
9
8,500
8,500
6,600
6,600
SAI21000
SAI21005
SAI21010
SAI21015
SAI21002
SAI21006
SAI21012
SAI21016
SAI21084
SAI21089
SAI21094
SAI21099
344
• 4 horsepower maximum motor.
• Keyless adjustable guard.
• Low profile gearcase.
• 5 position side handle.
• Light Weight increases productivity in
extended use applications
• Includes: 9" guard, 5-position side
handle.
1/4
1/4
1/4
1/4
7/8
5/8-11
7/8
5/8-11
Hartford, CT
800-969-0285
Size
Dia. Width Bore
5
6
7
Max.
RPM
A46N
Grades Available
A60S
Saitech
.045 7/8 12,200 SAI22350 SAI22071 SAI22073
.045 7/8 10,200 SAI22360 SAI22047 SAI22082
.045 7/8 8,500 SAI22370 SAI22053 SAI22088
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Compact Jig Saw Kit
Part No.
Description
DW317K Compact Jig Saw Kit
Anchors
120 V AC
5.5 Amps
0-3,100
1"
4-position
6.2 lbs.
DW317K
Jig Saw Blades
Advantages:
Features:
• Cuts through most materials,
including stainless steel and nailembedded woods
• Long life
•Retains tooth sharpness longer
• Increases productivity
• Smoother and faster cutting
• Shatterproof
• Shock resistant teeth
• High wear and high heat
resistance
• Bi-Metal construction
• Precision milled teeth and ground
teeth
• Matrix II or M42* high speed
steel cutting edge
• Tooth hardness Rc 66 minimum
• 0° Tang angle
• Tangs to fit all major
manufacturers of Jig Saw
Machines
Tools
Benefits:
Universal Style Specifications
L x W x Th (Inches)
TPI
Tooth Style
Recommended Use
20620-486J
4-1/2 x 3/8 x .050
6
Milled
Wood, fast cut, rough
20622-480J
4-1/2 x 3/8 x .050
6
Milled
Wood, nail-embedded
20628-356JF
3-1/2 x 1-1/8 x .050
20638-340JV
3-1/2 x 3/8 x .037
20610-314J
3 x 3/8 x .037
6/10
Milled
Wood, flush cut
10/14
Milled
Wood/metal, all purpose
14
Milled
Metal over 1/4" thick
Abrasives
Part No. (2/Pack)
Strut
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Threaded
Rod
• Keyless blade clamp for fast, easy blade
installation and removal.
• 5.5 Amp motor deliver powerful cuts in
the hardest materials.
• Variable speed delivers 0 - 3,100 strokes
per minute for optimal cutting speed.
• 4-position orbital action allows for
faster, more aggressive cuts in a variety
of materials.
• All-metal gear case provides superior
durability on a professional site.
• Shoe bevels 0° to 45° for beveled cuts.
• Includes: 1 Blade, Heavy-duty kit box.
Pipe
Hangers
Specifications
Fasteners
Corded Jig Saws & Blades
3 x 3/8 x .037
18
Milled
Metal over 1/8" thick, general purpose
3 x 3/8 x .037
24
Milled
Thin metal, plastic, polys, paneling
20690-350JC
3-1/2 x 1/4 x .050
10
Milled
Wood, contour/scroll
OnSite
Supply
20611-318J
20612-324J
Bosch Style Specifications
Tooth Style
4-1/2 x 3/8 x .050
L x W x Th (Inches)
6
Milled
Wood, fast cut, rough
Recommended Use
410S
4-1/2 x 3/8 x .050
10
Milled
Wood, nail-embedded
Safety
Part No. (2/Pack)
314S
3 x 3/8 x .037
14
Milled
Metal over 1/4" thick
318S
3 x 3/8 x .037
18
Milled
Metal over 1/8" thick, general purpose
324S
3 x 3/8 x .037
24
Milled
Thin metal, plastic, polys, paneling
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
345
Rentals
TPI
406S
Fasteners
Corded Reciprocating saws
Anchors
DW304PK
6538-21
10 Amp Reciprocating Saw Kit
15 Amp Super Sawzall Reciprocating Saw
®
Strut
Threaded
Rod
• 15.0 Amp Milwaukee Motor - highest overload protection in the
industry; prevents motor burn up / failure.
• Constant Power Technology™ - maintains constant speed under
load for unmatched cutting performance.
• Patented Gear Protecting Clutch - extends gear and motor life by
absorbing high impact forces caused by sudden blade lock-ups.
• Patented Counter Balanced Mechanism - smoothest running,
lowest vibrating reciprocating saw in the industry.
• Variable Speed Trigger and Dial Speed Control - maximum
speed control.
• Quik-Lok™ Blade Clamp System - fast and easy blade changes.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Pipe
Hangers
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Part No.
6538-21
120 V AC
15.0 Amps
0-2,800 spm
1-1/4"
Yes
14.4 lbs.
• 4-position blade clamp allows for flush cutting and increased
versatility.
• Powerful 10.0 Amp motor designed for heavy-duty applications.
• Lever-action keyless blade clamp for quick and easy blade
changing.
• 0-2,800 strokes per minute and 1-1/8" stroke length deliver fast
cutting.
• Variable speed trigger provides improved control.
• Includes: Heavy-duty carrying case, instruction manual.
Specifications
Volts:
120 V AC
Amps:
10.0 Amps
Strokes per minute: 0-2,800 spm
Stroke Length:
1-1/8"
Keyless Blade Clamp: Lever
Shoe:
Fixed
Weight:
7.0 lbs.
Part No.
Description
DW304PK 10 Amp Reciprocating Saw Kit
Description
15 Amp Super Sawzall® Reciprocating Saw
Tools
6519-31
6509-31
Abrasives
11 Amp Sawzall® Plus Reciprocating Saw
OnSite
Supply
• 11 amp Milwaukee built motor.
• 0-2800 SPM variable speed trigger.
• Quik-Lok™ blade clamp for fast, easy blade changes.
• Gear protection system.
• Keyless adjustable shoe.
• Double bearing wobble plate mechanism.
• Rubber boot for superior gripping.
• Double insulated.
• Uses standard 1/2 in. shank Sawzall® Blades - blades may be
clamped upside down for special cutting needs.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
11 Amp Sawzall® Reciprocating Saw
• 11 amp Milwaukee built motor.
• 0-2800 SPM variable speed trigger.
• Quik-Lok™ blade clamp for fast, easy blade changes.
• Double bearing wobble plate mechanism for less vibration
• Center pivot adjustable shoe.
• Rubber boot for superior gripping.
• Uses standard 1/2 in. shank Sawzall® Blades - blades may be
clamped upside down for special cutting needs.
• Quik-Lok™ Blade Clamp System - fast and easy blade changes.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Safety
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Part No.
6519-31
Rentals
346
120 V AC
11.0 Amps
0-2,800 spm
1-1/8"
No
11.3 lbs.
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Part No.
Description
11 Amp Sawzall Reciprocating Saw
®
Specifications
Hartford, CT
800-969-0285
6509-31
Boston , MA
800-645-6155
120 V AC
11.0 Amps
0-2,800 spm
3/4"
No
11.3 lbs.
Description
11 Amp Sawzall® Reciprocating Saw
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
6523-21
Specifications
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Part No.
6520-21
120 V AC
12 Amps
0-2,800 spm
1-1/8"
Yes
8.8 lbs.
Description
12 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
• 360° Rotating Handle.
• 13 Amp Milwaukee Built Motor
• Orbital Cutting Action.
• Variable Speed Trigger, 0-3000 SPM.
• 1-1/4 in. Stroke.
• Counter Balanced/Gear Protection Systems.
• Speed Dial.
• Quik-Lok™ Blade Clamp.
• Quik-Lok® Cord.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Strut
• 12 Amp Milwaukee Built Motor
• Orbital Cutting Action.
• Variable Speed Trigger, 0-2,800 SPM.
• 1-1/8 in. Stroke.
• Exclusive gear protecting clutch
• Quik-Lok™ Blade Clamp.
• Quik-Lok® Cord.
• Includes: Heavy-duty carrying case, (1) Sawzall® blade.
Threaded
Rod
12 Amp Orbital Sawzall® Reciprocating Saw
13 Amp Rotating Handle
Super Sawzall® Reciprocating Saw
Specifications
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Part No.
6523-21
120 V AC
13 Amps
0-3,000 spm
1-1/4"
Yes
10 lbs.
Pipe
Hangers
6520-21
Fasteners
Anchors
Corded Reciprocating Saws
Description
13 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
Reciprocating Blade Kits
Tools
No. 20502-546A General Purpose
6536-21
13 Amp Rotating Handle
Super Sawzall® Reciprocating Saw
One each Reciprocating
Blades 414R, 418R, 614R,
618R, 656R. Vinyl pouch.
Abrasives
• 13 Amp Milwaukee Built Motor.
• Orbital Cutting Action.
• Variable Speed Trigger, 0-3000 SPM.
• 1-1/4 in. Stroke.
• Counter Balanced/Gear Protection Systems.
• Quik-Lok™ Blade Clamp
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
6536-21
No. 20433-24RKG General Purpose
Description
13 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
Five each of Reciprocating
Blades 656R, 610R, 614R,
618R.
Safety
Part No.
120 V AC
13 Amps
0-3,000 spm
1-1/4"
Yes
14.4 lbs.
OnSite
Supply
Volts:
Amps:
Strokes per minute:
Stroke Length:
Orbital Action:
Weight:
Two each 6514R, 6066R.
Plastic Case.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
347
Rentals
Fasteners
Milwaukee Reciprocating saw Blades
The AX™ and the Torch® Demolition Blades
Exclusive “The AX" Features
1/2" universal blade tang fits in all Sawzalls®
Anchors
062" thick for stiffer performance
Sloped shape ideal for plunge cutting
Strengthened tooth top
Wide bullet shape allows chips to clear the cut
Bi-metal construction increases cutting speed and
blade life
Blades do not shatter
Exclusive “The Torch" Features
Matrix II teeth with 8% cobalt
.042" and .062" thick* for stiffer performance and longer life
More aggressive blade removes more material per stroke for
faster cutting
Uniform gullet depth
Blade reversible in clamp
Strut
Tooth
Recommendations
Threaded
Rod
See “Recommended for
Cutting" for proper blade
selection
5/Pack
25/Pack
TPI
Stock Thickness
TPI
4/6
1/2" and above
8/12
5/8
6, 7
TPI
3/8" and above
10
Stock Thickness
TPI
Stock Thickness
14
3/16" through 1/4"
18
1/8" through 3/16"
24
below 1/8"
1/4" through 3/8"
10/14
L x W x Th
Recommended for Cutting
Wood, Nail Embedded Wood & Demolition
48-00-5021
48-00-8021
5/8
6 x 1 x .062
Excellent for plunge cutting into wood or nail embedded wood without bending
Pipe
Hangers
48-00-5026
48-00-8026 5/8
9 x 1 x .062
Walls that contain wood, nails, plaster and aluminum. Great for demolition
48-00-5027
48-00-8027 5/8
12 x 1 x .062
Extra long demolition blade
Demolition, Rescue and Remodeling
48-00-5700
48-00-8700
8
6 x 1 x .062
48-00-5705
48-00-8705
8
9 x 1 x .062
Tools
48-00-5710
48-00-8710
8
48-00-5712
48-00-8712
10
6 x 1 x .042
12 x 1 x .062
48-00-5713
48-00-8713
10
9 x 1 x .042
48-00-5782
48-00-8782
14
6 x 1 x .042
48-00-5787
48-00-8787
14
9 x 1 x .042
Abrasives
48-00-5784
48-00-8784
18
6 x 1 x .042
48-00-5788
48-00-8788
18
9 x 1 x .042
48-00-5789
48-00-8789
18
12 x 1 x .042
Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood
Demolition, Rescue and Remodeling
48-00-5795
48-00-8795
14
9 x 1 x .062
48-00-5798
48-00-8098
18
9 x 1 x .062
Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood
Also ideal for plunge cutting in rescue and demolition work.
OnSite
Supply
Demolition, Rescue and Remodeling
—
8
6 x 1 x .062
48-00-5510*
—
8
9 x 1 x .062
48-00-5515*
—
8
12 x 1 x .062
48-00-5500*
Safety
48-00-5512*
—
10
6 x 1 x .042
48-00-5513*
—
10
9 x 1 x .042
48-00-5582*
—
14
6 x 1 x .042
48-00-5587*
—
14
9 x 1 x .042
48-00-5570*
—
14
12 x 1 .042
Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood.
Rentals
*Note: When using 20 mm torch blades on Super Sawzalls with keyless blade clamp, operator must convert tool to blade clamp 49-22-5004. For keyed blade clamp
Super Sawzalls, convert to 49-22-5000 blade clamp.
348
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Tri-lingual
5/Pack
25/Pack
50/ Pack
TPI
48-01-5011
48-01-5012
48-01-5031
48-01-5035
48-01-5036
48-01-5037
48-01-5041
‑
-
48-02-5031
48-02-5035
48-02-5036
48-02-5037
48-02-5041
‑
48-00-5012
48-00-5031
48-00-5035
48-00-5036
48-00-5037
48-00-5041
‑
-
48-00-8031
-
48-00-8036
-
-
‑
6
48-01-6012 6
48-01-6031 5/8
48-01-6035 6
48-01-6036 6
48-01-6037 6
48-01-6041 4/6
-
-
-
-
-
-
48-00-5015 -
48-00-5016 -
48-00-5017 -
-
-
-
6
6
6
48-01-5052 48-02-5052 48-00-5052 -
48-01-6052
48-01-5090
48-01-5092
48-01-5091
48-01-5093
48-01-5094
48-01-5193
48-01-5194
-
48-02-5092
48-02-5091
48-02-5093
48-02-5094
-
-
48-00-5090
48-00-5092
48-00-5091
48-00-5093
48-00-5094
48-00-5193
48-00-5194
-
-
-
48-00-8093
-
-
-
48-01-6090
48-01-6092
48-01-6091
48-01-6093
48-01-6094
48-01-6193
48-01-6194
6
10
10
8/12
8/12
8/12
10/14
10/14
48-01-5161
48-01-5162
48-01-5163
-
48-02-5162
-
48-00-5161
48-00-5162
48-00-5163
-
-
-
-
-
-
10
14
18
48-01-5181
48-01-5182
48-01-5282
48-01-5187
48-01-5183
48-01-5184
48-01-5284
48-01-5188
48-01-5189
48-01-5185
48-01-5186
48-01-5286
-
48-02-5182
-
48-02-5187
-
48-02-5184
-
48-02-5188
48-02-5189
-
48-02-5186
-
48-00-5181
48-00-5182
48-00-5282
48-00-5187
48-00-5183
48-00-5184
48-00-5284
48-00-5188
48-00-5189
48-00-5185
48-00-5186
48-00-5286
-
48-00-8182
-
-
-
48-00-8184
-
-
-
-
48-00-8186
-
48-01-6181
48-01-6182
48-01-6282
48-01-6187
48-01-6183
48-01-6184
48-01-6284
48-01-6188
48-01-6189
48-01-6185
48-01-6186
48-01-6286
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
14
14
14
14
18
18
18
-
-
-
-
-
Cuts on
forward &
backward
stroke
Fiberglass
L x W x Th
Recommended for Cutting
Wood Cutting Blades
4 x 3/4 x .050
6 x 3/4 x .050
6 x 3/4 x .050
6 x 3/4 x .050
9 x 3/4 x .050
12 x 3/4 x .050
6 x 1/2 x .050
Fast cutting, all woods, nail embedded,
composition materials.
Wood Cutting Blades
Very fast cutting, nail embedded wood,
general roughing-in.
Very fast scroll cutting, circles, contours,
nail embedded wood.
Wood and Plastic Cutting Blades
6 x 3/4 x .050
9 x 3/4 x .050
12 x 3/4 x .050
Fleam filed teeth for extremely sharp, fast
cutting with a smooth edge in nail free
wood and plastics.
Plastic Cutting Blade
5 x 3/4 x .050
Long life, plaster, plaster with metal lath,
plasterboard. Cuts forward and
backward stroke.
All Purpose Blades
4 x 3/4 x .035
6 x 3/4 x .035
6 x 3/4 x .050
8 x 3/4 x .050
12 x 3/4 .050
8 x 5/8 x .035
12 x 5/8 x .035
All woods, nail embedded, composition
material, plastic, ferrous and non-ferrous metals.
All woods, nail embedded, composition
material, plastic, ferrous and non-ferrous
metals, cast iron.
All woods, nail embedded, composition
material, plastic, light gauge non-ferrous
metals and aluminum. Has 5/8" width for
higher flexibility.
Metal Scroll Cutting Blades
3-5/8 x 5/16 x .035 Scroll cutting wood, contours, nail embedded
wood, plastics.
3-5/8 x 5/16 x .035 Scroll cutting metal 1/8" thru 3/16".
3-5/8 x 5/16 x .035 Scroll cutting metal under 1/8".
Metal Cutting Blades
4 x 3/4 x .035
6 x 3/4 x .035
6 x 5/8 x .035
9 x 3/4 x .035
4 x 3/4 x .035
6 x 3/4 x .035
6 x 5/8 x .035
18
18
24
24
24
Metal 3/16" thru 1/4", conduit, tubing,
channels, pipe, rubber, fiber.
Same as 48-01-5182, but has 5/8" width for
higher flexibility.
Metal 3/16" thru 1/4", conduit, tubing,
channels, pipe, rubber, fiber.
Metal 1/8" thru 3/16", conduit, tubing,
channels, pipe.
Same as 48-01-5148, but has 5/8" width for
higher flexibility.
9 x 3/4 x .035 Metal 1/8" thru 3/16", conduit,
12 x 3/4 x .035 tubing, channels, pipe.
4 x 3/4 x .035 Metal thinner than 1/8",
6 x 3/4 x .035 tubing, pipe, trim.
6 x 5/8 x .035 Same as 48-01-5186, but has
5/8" width for higher flexibility.
Boston , MA
800-645-6155
Fasteners
Strut
2/Pack
Metal Glass Ceramic
Tile
Cutting
Hartford, CT
800-969-0285
349
Threaded
Rod
5/Pack
Aluminum Non-Ferrous Mild
Steel
Metals
Pipe
Hangers
Pallet
Cutting
Tools
For use
w/ Pipe
Clamp
Abrasives
Plaster
Drywall
OnSite
Supply
Plunge
Cutting
Safety
Scroll
Cutting
Rentals
Nail
Wood Universal Specialty
Blade
Embedded
Wood
Anchors
Milwaukee Reciprocating saw Blades
Fasteners
Lenox Reciprocating saw Blades
Anchors
* Denotes Best Selling Blades
Part No.
L x W x Th
TPI
Shape
Recommended Usage
Strut
Threaded
Rod
Pipe
Hangers
Tools
LEN656R
6 x 3/4 x .050
6
LEN156R
12 x 3/4 x .050
6
LEN956R
9 x 3/4 x .050
6
LEN676RC
6 x 7/16 x .050
6
Contour cutting in all woods, nail-embedded wood and
composition material
LEN606R
6 x 3/4 x .035
6
Fast cutting wood, composition materials, plastics, and
non-ferrous.
LEN634R
6 x 3/4 x .035
4
Extra fast cutting in thick, nail-free wood.
LEN610R*
6 x 3/4 x .035
10
LEN810R
8 x 3/4 x .050
10
LEN110R
12 x 3/4 x .050
LEN314RC
3 x 1/4 x .032
14
LEN414R
4 x 3/4 x .035
14
LEN614R*
6 x 3/4 x .035
14
LEN418R*
4 x 3/4 x .035
18
LEN618R*
6 x 3/4 x .035
18
LEN818R
8 x 3/4 x .035
18
LEN318RC
3 x 1/4 x .032
18
LEN424R
4 x 3/4 x .035
24
LEN624R
6 x 3/4 x .035
24
LEN636RP
6 x 3/4 x .050
6
EN600RG
6 x 3/4 x .032
Roughing-in work and nail-embedded wood. Fast cutting,
pipe, structural steel, stainless steel, non-ferrous metal:
3/16" and thicker.
Nail-embedded wood, composition materials, and plastics. Pipe,
carbon, steel, stainless steel: 1/8"- 1/4"; ferrous metal: 1/8"-1/2"
thick.
10/14
Contour cutting in wood <3/4" and in metal 3/32"-5/16
Pipe, structural steel, stainless steel: 3/32"-1/4". Nonferrous metal: 3/23"-3/8" hard rubber.
Structural steel, pipe, conduit, stainless steel: 1/16"-3/16".
Non-ferrous metal: 1/16"-5/16" Pallet cutting for 618R and
818R blades only
Contour cutting in metal: 1/16"-1/8" thick.
All metals less than 1/8" thick. Tubing, conduit, trim.
Abrasives
For plaster, plaster board and lath. Bi-directional cutting.
Pipe, structural steel, stainless steel, non-ferrous metal:
5/32" and thicker. Nail-embedded.
Medium
Carbide
Grit
OnSite
Supply
Safety
LEN100RG
8 x 3/4 x .050
LEN800RG
8 x 3/4 x .040
LEN966R*
9 x 7/8 x .062
6
DEMO
Demolition work in nail-embedded wood.
LEN960R*
9 x 7/8 x .062
10
DEMO
Demolition work in wood and metal. Fire and rescue.
LEN650R
6 x 3/4 x .050
10/14
LAZER
3-16" - 3/4"
LEN6110R
6 x 3/4 x .042
10
LAZER
1/8" - 1"
LEN6114R
6 x 3/4 x .042
14
LAZER
3-32" - 3/8"
LEN6118R
6 x 3/4 x .042
18
LAZER
1/16" - 1/4"
LEN114R
9 x 3/4 x .042
14
Rentals
350
Hartford, CT
800-969-0285
Cast iron, fiberglass, ceramic tile, clay pipe, stone, brick,
plaster, marble.
LAZER
3/32" - 3/8"
Boston , MA
800-645-6155
LAZER
Fire and rescue.
Heavy-duty.
Extended life
when cutting
pipe, structural
steel, stainless steel:
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Specifications
Length x
12 x 1/2
12 x 1/2
12 x 1/2
12 x 1/2
Width x Gauge
x .025
x .025
x .025
x .025
Teeth
14
18
24
32
Bi-Metal Box
20115-214HE
20116-218HE
20117-224HE
20117-232HE
No. 975 Hacksaw
No. 4012 Hackmaster®
Rugged die-cast aluminum. Designed for
hard to get at places. Cuts bolts, wire,
tubing and plastic. With bi-metal 10”
blade which outlasts up to 10 ordinary
blades.
Description
20975-975
Hacksaw
Part No.
Description
20918-4012
Hacksaw frame
Fasteners
Pipe
Hangers
Part No.
High Tension Hand Hacksaw Frame
With 12” blade. Tension to 28,000 psi.
The finest frame you can buy.
Anchors
• Shatterproof Hackmaster 2® bi-metal blades cut stainless, pipe, conduit, bar and rod, aluminum, brass, copper,
almost any material
• With high tension frames, you get the straightest possible cuts, longest life
• Full assortment of frames, handles
Strut
Hacksaw Blades
Threaded
Rod
Hack Saw Blades / Frames
Gray Wolf™
5012 Hacksaw Frame
Tri-Fold Saw
LENOX Gold Locking
Tradesman Utility Knife
•
•
•
•
•
•
•
•
•
•
•
Resists breakage
Easy blade change
Cuts in hard to get at places
Heavy duty aluminum handle
Complete with 6” (150 mm) Lenox
Reciprocating Blade
Blade folds away safely
Locks in 3 positions
Comfortable hand grip
Hanging hole in handle
Accepts reciprocating blades using 1/2”
tang
Easy to carry on the job - fits in
your pocket
Retractable Utility Knife
Part No.
Description
•
•
•
•
•
20992-3636
Tri-Fold Saw
Tough zinc die-cast body
3 Position retractable blade
Non-slip thumb rest
Extra blade storage inside
2 Lenox Edge™ shatter-resistant bi-metal
blades included
Part No.
Description
10099
Retractable Knife
Philadelphia, PA
610-647-8070
Replacement Utility Knife
Blades
Part No.
Description
EDG50D
EDG100D
EDG5C
Lenox Edge 50 Pack
Lenox Edge 100 Pack
Lenox Edge 5 Pack
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Frame has 4” pipe clearance combined
with sloped front for access in tight work
spaces.
Part No.
Description
25012
Hacksaw frame
Abrasives
Description
10771
OnSite
Supply
Part No.
®
PVC/ABS Plastic
Pipe Hand Saw
Designed especially to cut PVC and ABS
plastic pipe without binding. Can also
do other general cutting of plastic and
wood. Cuts on both push and pull strokes.
Die-cast aluminum handle, replaceable
tempered carbon steel 12” or 18” blade.
Part No.
Description
20980-HSF-180
20985-HSF-120
20981-HSB-18
20982-HSB-12
18" blade & handle
12" blade & handle
18" replacement blade
12" replacement blade
Hartford, CT
800-969-0285
351
Safety
Easy open and close
Comfort Grip
Multi-Use Tool
Built-in wire stripper
Rentals
•
•
•
•
Tools
Locking Tradesman Utility Knife
Compact Band Saw
M
CO
Fasteners
Corded Portable Band Saws
PACT
Anchors
6242-6N
Strut
Milwaukee Compact Bandsaws require a
35-3/8" x 1/2" x .020" Blade - Please see
page 353
• 45% Lighter than Deep Cut – Compact,
light-weight design for cutting overhead
and in tight places.
• 200-360 SFPM Variable Speed Dial
• 3-1/4" Cut Capacity – cuts most common materials for Electrician, Plumber
and Mechanical cutting applications.
• Tool-Free Adjustable Material Shoe – allows flush cuts when working with installed
materials against walls and ceilings.
• LED Work Light – illuminates the cut line.
• Quick change Blade Ejection System.
• Drop Resistant Pulley Guard
• Cast Aluminum Gear Case.
Specifications
Volts:
Amps:
Speed (ft./min.):
Max Capacity:
Weight:
Part No.
Threaded
Rod
•
•
•
•
•
•
Pipe
Hangers
•
•
Specifications
10.5 Amp Motor
0-420 SFPM - Up to 40% faster cuts
4-7/8" Cutting Capacity - deeper cuts
Variable Speed Dial & Trigger -
adjusts the speed for different materials
Multi-Grip T-Handle -provides multiple
grip options for increased control
Rear Blade Guard - 30% thicker steel
protects the guard from bending or
pinching during material break-through
Adjustable Material Guide
2-Finger Variable Speed Trigger - ability
to start the cut slowly for accuracy
Volts:
Amps:
Speed (ft./min.):
Max Capacity:
Weight:
Part No.
Tools
Abrasives
• 10.5 Amp Motor
• 420/320 SFPM - Up to 40% faster cuts
• 4-7/8" Cutting Capacity - deeper cuts
• Hi/Lo Switch - adjusts the speed for
different materials
• Multi-Grip T-Handle -provides multiple
grip options for increased control
• Rear Blade Guard - 30% thicker steel
protects the guard from bending or
pinching during material break-through
• Adjustable Material Guide
OnSite
Supply
Safety
6225
Volts:
Amps:
Speed (ft./min.):
Max Capacity:
Weight:
Part No.
6238N
6236N
Rentals
Hartford, CT
800-969-0285
Description
Deep Cut Portable Band
Saw, with Carrying Case
Deep Cut Portable Band Saw
Volts:
Amps:
Speed (ft./min.):
Max Capacity:
Weight:
Part No.
Boston , MA
800-645-6155
120 V AC
10.5 Amps
420/320 sfpm
4-7/8" (Round or
Rectangular)
17.5 lbs.
Specifications
6226
6225
352
Description
Specifications
Portable Band Saw
• Cuts up to 3-1/2 in. x 4-1/2 in. rectangular stock and 3-1/2 in. round stock.
• 6.0/5.0 amp, AC only.
• Two-speeds: 200 and 250 sfpm.
• Uses standard 44-7/8 in. x 1/2 in. x .020
in. band saw blades.
120 V AC
10.5 Amps
0-420 sfpm
4-7/8" (Round or
Rectangular)
17.5 lbs.
6232-6N Deep Cut Portable Band
Saw, with Carrying Case
6230N
Deep Cut Portable Band Saw
Deep Cut Portable Band Saw
6236N
Description
6242-6N Compact Band Saw,
with Carrying Case
Deep Cut Portable Band Saw
6230N
120 V AC
7 Amps
200-360 sfpm
3-1/4" x 3-1/4"
(Rectangular)
3-1/4" (round)
9.5 lbs.
120 V AC
6.0/5.0 Amps
250/200 fpm
3-1/2" x 4-1/2"
(Rectangular)
3-1/2" (round)
16.0 lbs.
Description
Portable Band Saw,
with Carrying Case
Portable Band Saw
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• Externally replaceable brushes allow for
quick repairs on the jobsite
• Includes band saw blade and case.
Deep Cut
Variable Speed Band Saw Kit
120 V AC
10.0 Amps
100-350 fpm
5" (Round)
5" x 4-3/4"
Rectangular)
15.0 lbs.
Volts:
Amps:
Speed (ft./min.):
Max Capacity:
Weight:
Part No.
Description
DWM120K Deep Cut Variable Speed Band
Saw Kit
Anchors
• 10 amp motor designed with controlled
power to withstand any jobsite application
• 5" deep cut capacity for rectangular or
round stock
• Steel shroud and rubber bumpers withstands jobsite abuse
• LED sight light
• Integrated hang hook
• Variable speed dial (100-350 spm).
• Multi-position adjustable large front handle.
• Blade changing lever loosens blade tension to allow for blade change
DWM120K
Strut
Specifications
Fasteners
Corded Portable Band Saws
Advantages
Benefits
Bi-Metal construction
Matrix II Type alloy high speed steel
Tooth hardness RC 66-68
Edge contains 8% Cobalt
• Tough Shock Resistant Alloy with less
tooth chippage
• Withstands higher cutting temperatures
than M2 or carbon steel blades
• Lasts longer on interrupted cuts, and
mild to difficult to machine materials
• Attains higher productivity than M2 or
carbon steel blades
Fits Black & Decker,
Greenlee, Milwaukee,
Porter Cable, DeWalt
and Ridgid
TPI
25-Pack
80114-38EW
80098-38PW-10/14 38423-38PW-10/14
80115-38EW
80107-38PW-14
80112-38EW
80099-38PW-14/18 38427-38PW-14/18
80116-38EW
80108-38PW-18
38425-38PW-18
80117-38EW
80109-38PW-24
38426-38PW-24
10/14
Application
1/4" and larger
14
3/16" - 3/8"
14/18
1/8" - 5/16"
18
3/32" - 1/4"
38424-38PW-14
24
Pipe
Hangers
44-7/8" x 1/2" x .020
5-Pack
up to 1/8"
1/4" and larger
80119-45EW
10/14
53-3/4" x 1/2" x .020
80120-45EW
14
Fits Greenlee and
Porter Cable
80123-45EW
14/18
1/8" - 5/16"
80121-45EW
18
3/32" - 1/4"
80122-45EW
24
up to 1/8"
Tools
3-Pack
3/16" - 3/8"
Bi-Metal Band Saw Blade Specifications
For use with Milwaukee and other Band Saws
44-7/8" x 1/2" x .020
Super-Tough®
100/Pack
44-7/8" x 1/2" x .020
Multi-Tooth®
100/pack
35-3/8" x 1/2" x .020
Compact Band Saws
Philadelphia, PA
610-647-8070
Part No.
TPI
Cutting Thickness
48-39-0512
14
3/16" - 5/16"
High speed cutting of aluminum
48-39-0522
18
5/32" - 3/16"
Aluminum, angle iron, bronze,brass, copper, galvanized
pipe, mild steel; and tougher steels, including stainless,
chrome,tungsten steel plus other problem materials. Slow
speeds
48-39-0552
10/14
3/16" - 1/2"
48-39-0562
14/18
5/32" - 5/16"
48-39-0517
14
3/16" - 5/16"
High speed cutting of aluminum
5/32" - 3/16"
Aluminum, angle iron, bronze,brass, copper, galvanized
pipe, mild steel; and tougher steels, including stainless,
chrome,tungsten steel plus other problem materials.
48-39-0527
18
Washington D.C.
877-419-2755
Application
OnSite
Supply
Size
For interrupted cutting applications (tubing, structural, etc.) Also
production cutting of solids in a variety of sizes or shapes.
Stainless steel
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Abrasives
Size
Wolf-Band®
353
Safety
Master-Band®
Rentals
•
•
•
•
Features
Threaded
Rod
Portable Bands® Master-Band Specifications
Fasteners
Corded Circular Saws
6390-21 Tilt-Lok™ 7-1/4" Circular Saw
Anchors
• New exclusive Tilt-Lok™ main handle adjusts to the work or most comfortable work position.
• 10.4 pounds net weight - lightest 7-1/4 inch, 3.25 maximum horsepower
saw reduces operator fatigue, easier to handle.
• Wide, clear sight line - superior blade visibility from either side.
• Includes: Carrying Case for Circular Saws, Circular Saw Blade, Hex Blade Wrench.
Specifications
Strut
6390-21
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Blade Diameter:
Depth of Cut @ 90°:
Depth of Cut @ 45°:
Weight:
120 V AC
15.0 Amps
5,800 rpm
Wood
56 degrees
7-1/4"
2-7/16"
1-13/16"
10.4 lbs.
Threaded
Rod
6394-21 Tilt-Lok™ 7-1/4" Circular Saw w/ Electric Brake
Pipe
Hangers
• Exclusive Tilt-Lok™ main handle adjusts to the work for most comfortable
work position.
• Patented power assisted electric brake stops blade in second.
• Quik-Lok® cord makes job site replacement fast and easy.
• Powerful 3.0 max. horsepower, 15 amp motor.
• Includes: Carrying Case for Circular Saws, Circular Saw Blade, Hex Blade Wrench.
Specifications
Tools
6394-21
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Blade Diameter:
Depth of Cut @ 90°:
Depth of Cut @ 45°:
Weight:
120 V AC
15.0 Amps
5,800 rpm
Wood
56 degrees
7-1/4"
2-7/16"
1-13/16"
10.4 lbs.
Abrasives
DW368 Heavy Duty 7-1/4" Lightweight Circular Saw
DW368
OnSite
Supply
• 15 Amp, 2,200 MWO motor powerful enough for the toughest applications.
• 56° beveling capacity with stops at 45° and 22.5° allows for aggressive bevel cuts
while allowing user to locate common angles quickly.
• Magnesium shoe designed for increased durability.
• Clear line of sight aids in blade visibility from any angle.
• Lower guard design improves performance when making bevel cuts and cutting shims.
• Includes: Carbide tipped blade, blade wrench, heavy-duty kit box.
Specifications
Safety
Rentals
354
Hartford, CT
800-969-0285
Volts:
Amps:
Max Watts Out:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Bevel Stops:
Blade Diameter:
Depth of Cut @ 90°:
Depth of Cut @ 45°:
Weight:
Boston , MA
800-645-6155
120 V AC
15.0 Amps
2,200 W
5,800 rpm
Wood
56 degrees
45° / 22.5°
7-1/4"
2-3/8"
1-3/4"
9.5 lbs.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• 15 amp motor: AC-DC.
• 5200 rpm
• 3-13/16 inch maximum depth at 90 degrees
• High capacity: cuts 4X4's.
• Includes: Carrying Case for 10-1/4 in. Saw, Circular Saw Blade, 9/16 in. Wrench,
Rip Fence, Side Handle.
6470-21
Specifications
Strut
120 V AC
15.0 Amps
5,200 rpm
Wood
60 degrees
10-1/4"
3-13/16"
2-3/4"
17.8 lbs.
Threaded
Rod
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Blade Diameter:
Depth of Cut @ 90°:
Depth of Cut @ 45°:
Weight:
6577-20 7-1/4" Worm-Drive Circular Saw
• Maximum cutting performance and does not bog down, even under heavy loads.
• Hardened steel worm gearing provides maximum torque
• Magnesium Construction- durable, lightweight.
• Heavy-Duty Composite Shoe- will not warp, bend or kick up a burr.
• Exclusive Oil Site Glass-instantly gauge current oil level.
• Folding Rafter Hook- Allows quick, convenient storage of tool.
• Highly Visible Depth and Bevel Scales- visible from behind the body of the saw.
• Includes: 24T Carbide Tipped Blade, Blade Wrench.
6577-20
Pipe
Hangers
Fasteners
6470-21 10-1/4" Circular Saw
Anchors
Corded Circular Saws
Specifications
120 V AC
15.0 Amps
4,400 rpm
Wood
56 degrees
45° / 22.5°
7-1/4"
0 to 2-7/16"
0 to 1-25/32"
14.3 lbs.
Tools
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Bevel Stops:
Blade Diameter:
Depth of Cut @ 90°:
Depth of Cut @ 45°:
Weight:
Abrasives
6370-20 8" Metal Cutting Circular Saw
• Dry-cut technology provides faster, cleaner, more affordable metal cutting.
• Durable blade shield with integral chiptank deflects/collects hot chips and sparks.
• Plunge lever for fast, effective plunge cuts.
• Exclusive quick-release shield latch for fast waste disposal and blade changes.
• 2-9/16 in. cut depth for one-pass cuts through most common materials.
• Powerful 13.0 amp, 3,700 rpm motor.
• Premium cermet-tipped blades cut faster, cleaner, and longer than other carbidetipped or friction blades.
• Includes: Hex Blade Wrench, Circular Saw Blade, Carrying Case.
OnSite
Supply
6370-20
Specifications
Philadelphia, PA
610-647-8070
120 V AC
13.0 Amps
3,700 rpm
Metal
8"
2-9/16"
13.3 lbs.
Washington D.C.
877-419-2755
Safety
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Blade Diameter:
Depth of Cut @ 90°:
Weight:
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
355
Rentals
Fasteners
Corded Circular Saws
Anchors
Metal Devil metal cutting circular saws have a sturdy, heavy-duty
feel as they cut through metal smoothly and with minimum effort.
This saw was built to cut metal with a unique motor design that
maintains torque and operates at the optimum RPM as the blade
moves through steel, thin steel, aluminum and stainless steel.
Strut
•
•
•
•
•
•
•
Metal Devil® Metal Cutting Circular Saws
Features
Sure grip handles help steady saw during cutting
Special motor maintains torque at optimum RPM's during cutting
NEW! Quick Release Chip Collection collects virtually all chips
Durable carrying case
Upper chamber also minimizes sparks and deadens sound
Guide arrows and sight opening make it easier to position blade
9" saw can cut beveled edges with Laster Line cutting guide
Three sizes of metal-cutting saws are available from The M.K.
Morse Company. Although Morse Metal Devil™ saw blades are
available in sizes ranging from 5-3/8" to 14" diameter, the 7" and
9" blades fit perfectly on these Metal Devil saws. This makes it
easy for you to match the best metal-cutting circular saw blades
with the best metal-cutting circular saws available today.
Morse Metal Devil saw blades and saws - the
Faster, Cooler, Smoother way to cut ferrous and
non-ferrous metals, alike.
Threaded
Rod
CSM7MB 7" Metal Cutting Circular Saw
•
•
•
•
External Overload Switch
Chip Collection Chamber
Retractable Blade Guard
Includes: (2) Allen Wrenches for blade changes, (1) 7" Metal Devil® Steel Cutting
Blade, Length Adjuster, Side Handle, Safety Glasses, Ear Plugs, Carrying Case.
Specifications
Pipe
Hangers
CSM7MB
Arbor Size:
Amps:
Watts:
RPM:
20mm
11
1080
3,500
Blade Size:
Max. Cutting Depth:
Cord Length:
Weight:
7"
2.36"
8'
13 lbs.
CSM9MB 9" Metal Cutting Circular Saw
Tools
•
•
•
•
•
•
•
Laser Guide
0° - 45° Beveling
30 minute duty cycle
Overload Switch
Chip Collection Chamber
Retractable Blade Guard
Includes: Stamped Wrenche for blade changes, (1) 9" Metal Devil® Steel Cutting Blade,
Safety Glasses, Ear Plugs, Carrying Case.
Abrasives
Specifications
CSM9MB
Arbor Size:
Amps:
Bevel Cut:
Watts:
RPM:
1"
15
0° - 45°
1800
2500
Blade Size:
9"
Max. Cutting Depth: 3-1/4"
Max. Thickness of Cut: 3/8"
Cord Length:
8'
Weight:
19.75 lbs.
OnSite
Supply
CSM14MB 14" Metal Cutting Circular Saw
•
•
•
•
•
Safety
0° - 45° Mitering Vice
Plexiglas Safety Shield
Chip Collection Chamber
Retractable Blade Guard
Cutting Capabilities: Round @ 45° – 4-1/8"; @ 90° – 5-1/8"
Square @ 45° – 3-1/2" x 3-1/2"; @ 90° – 4-3/4" x 4-3/4"
Rectangular @ 45° – 3-1/8" x 4-3/8"; @ 90° – 3-3/4" x 7-1/4"
• Includes: 6mm and 8mm Hex Wrenches for blade changes, (1) 14" Metal Devil® Steel
Cutting Blade, Safety Glasses, Ear Plugs, Carrying Case.
Specifications
CSM14MB
Rentals
356
Arbor Size:
Amps:
Watts:
RPM:
Hartford, CT
800-969-0285
1"
15
1800
1300
Boston , MA
800-645-6155
Blade Size:
Miter Cut:
Cord Length:
Weight:
14"
0° - 45°
8'
13 lbs.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Metal Devil® Metal Cutting
Circular Saws Blades
Cuts Quicker, Cooler,
Longer
This 8” 50 tooth blade is
designed to cut a variety of
ferrous materials 3/32 inch and
thinner. The blade has vibration
damping which reduces heat,
sparks and noise for cleaner,
smoother, burr free cuts. Use
with Milwaukee Dry Cut Saw
6370-20.
Part No.
Dia.
Bore
Max RPM
# Teeth
Strut
48-40-4520
This 8” 42 tooth blade is
designed to cut a variety of
ferrous materials 3/32 inch and
thicker. The blade has vibration
damping which reduces heat,
sparks and noise for cleaner,
smoother, burr free cuts. Use
with Milwaukee Dry Cut Saw
6370-20.
Application
100137
36T
Steel
48-40-4025
100144
48T
Stainless Steel
This 6-1/2” 40
carbide teeth blade is
specially engineered
heat expansion
slots prevent blade
distortion and
increase blade life.
Recommended for use
on fiber cement.
100151
54T
Aluminum
7"
20MM
100168
68T
Thin Steel
100304
48T
Steel
60T
Stainless Steel
80T
Aluminum
68T
Thin Steel
5200
52T
Thin Steel
5500
80T
Aluminum
100366
1800
72T
Steel
100373
3800
80T
Aluminum
1800
90T
Stainless Steel
1800
90T
Thin Steel
100403
100328
9"
1"
100410
100427
100694
10"
14"
5/8"
KO
1"
100380
For Wood/General Purpose Cutting
DW7745
(90T) - Light Gauge Steel
DW7749
(90T) - For Stainless Steel
Features:
• 12% titanium carbide provides long life in metal cutting
• Modified ATB tooth geometry
provides clean, burr-free cuts
• Tri-foil braze absorbs stress,
making the tip stronger
• Expansion slots dissipate
heat which extends blade life
Washington D.C.
877-419-2755
DW3577 DeWalt 7-1/2"
General Purpose Blade
• Thin Kerf - for fast, efficient cuts
• Carbide teeth - for job site
durability
• Expansion slots - allow blade
to expand to prevent warping
for long life.
Part No.
Description
DW3577
General Purpose
Blade - 7-1/4"
Boston , MA
800-645-6155
Cheetah Thin Kerf Saw
7-1/2" Blades
Ultra Thin - Carbide Tipped
24 tooth, 7-1/2", thin cut
saw blades for smooth, fast
thin cuts. Carbide design for
aggressive sawing progress with
less burden on the machine and
user. Less material waste and
more accurate cuts.
Part No.
Description
UC-130-724 Thin Kerf UC-120-724 Ultra Thin Kerf
Hartford, CT
800-969-0285
Safety
This 14 in. blade is designed
to cut a variety of ferrous
materials including pipe, angle
iron, metal studs and conduit.
The blade has vibration
damping which reduces heat,
sparks and noise for cleaner
smoother, burr free cuts. For
use with Milwaukee Dry Cut
Machine 6190-20.
357
Rentals
DW7747
(70T) - Heavy Gauge Steel
OnSite
Supply
Abrasives
14"
48-40-4505 (72T)
48-40-4510 (90T)
Philadelphia, PA
610-647-8070
3200
100311
6-1/2"
Dry Cut Metal Cutting Blades
for Chop Saws - 14"
14"
5400
Threaded
Rod
48-40-4515
• Designed for use with the
Metal Devil® Metal Cutting
Circular Saws, but IMPROVES
the performance of any standard saw.
• Moves through metal up to
5X faster.
• Cut metal pieces may be
handled safely immediately after cutting
• Finished cut is burr-free and ready for finishing.
Pipe
Hangers
8"
Tools
Dry Cut Metal Blades - 5/8" Arbor
Fasteners
Circular Saws Blades
Fasteners
Corded Dry Cut Saws
6190-20 14 " Dry-Cut Machine
Anchors
• Powerful 4.8 max HP motor, 15 amp motor (1,500 rpm).
• Tool-free fence and vise system.
• Heavy-duty cast base.
• Horizontal D-handle for optimum comfort.
• Largest cutting capacity in class.
• Cuts fast with virtually no sparks or burrs.
• Includes: Circular Saw Blade 14 in. 72 Tooth Dry Cut Carbide Tipped, Hex Key.
Specifications
Strut
6190-20
Threaded
Rod
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Blade Diameter:
Capacity - O.D. Pipe:
Capacity - Square:
Maximum Opening:
Weight:
120 V AC
15.0 Amps
5,200 rpm
Wood
45 degrees
14"
5-3/8"
5"
8"
50 lbs.
Pipe
Hangers
DW872 Heavy Duty 14" Multi-Cutter Saw
Tools
• Multi-Cutter offers versatility by cutting a wide variety of materials including
ferrous and non-ferrous metals.
• Largest capacity in its class.
• Patented tool-free, 45º adjustable fence allows for fast and accurate angle cuts.
• Quick-lock vise allows for fast clamping on different size materials.
• Extra wide solid steel base provides increased stability.
• On-board wheel change wrench.
• Spindle lock allows users to make wheel changes quickly and easily.
• Adjustable chip deflector.
• Heavy-duty compression spring provides smooth movement and greater
durability than torsion springs.
• Quick-retracting guard allows user to see the line of cut.
• Vertical clamp provides the user with the most efficient clamping system in
the industry
• Includes: 14" carbide tipped blade, wrench, vertical clamp.
DW872
Abrasives
Specifications
OnSite
Supply
Volts:
120 V AC
Amps:
15.0 Amps
No-Load Speed:
1,300 rpm
Bevel Capacity:
56 degrees
Bevel Stops:
45° / 22.5°
Wheel Diameter:
14"
Capacity - Round:
5-3/16"
Capacity - Rectangle: 6-1/2" x 4-1/2"
Weight:
47 lbs.
71687 Model 614 14" Dry Cut Saw
Safety
• Powerful 15 amp motor.
• Cut different materials and geometric configuration without cutting fluid.
• Generates no burr, abrasive dust or heat,
providing clean and fast cuts on steel, copper, plastic and wood.
• Miter cut up to 45°.
• Largest cutting capacity in its class.
• Spindle lock.
• Dust collector.
• Built-in maintenance tools.
Rentals
358
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
• Exclusive quick-acting vise.
• Includes: 14" carbide tipped blade, two maintenance tools.
Blades for RIDGID Models 614 & 590 Dry Cut Saws
Cat. No.
Description
71697 12” Carbide-Tipped Blade 60 Tooth
71692 14” Carbide-Tipped Blade 80 Tooth
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
6176-20 14 " Abrasive Cut-Off Machine
Fasteners
Corded abrasive chop saws
6176-20
Anchors
• 15 amp, 2400 watts/3.2 maximum horsepower power output.
• 3900 RPM, 5 inch pipe cutting capacity.
• Heavy-duty cast iron base.
• Spindle lock for convenient changing of abrasive wheels.
• Includes: Vise, Abrasive Wheel, Hex Wrench.
Specifications
Threaded
Rod
Strut
120 V AC
15.0 Amps
3,900 rpm
Metal
45 degrees
14"
5"
5"
3-5/8"
9"
47 lbs.
DW871 Heavy Duty 14" Chop Saw
Tools
Pipe
Hangers
• Powerful 15.0 Amp/5.3 HP (maximum motor HP) motor.
• Patented tool-free, 45° adjustable fence.
• Quick-lock vise allows for fast clamping on different size materials.
• Extra wide solid steel base provides increased stability.
• The solid steel base also allows users to weld jigs or stops directly to the base.
• Heavy-duty compression spring provides smooth movement and greater
durability than torsion springs.
• The four pre-drilled holes in the base allow easy bolt down to any work bench.
• Durable metal top handle allows saw to be carried easily.
• Spindle lock allows user to make wheel changes quickly and easily.
• Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle) provides the
ability to cut a wide variety of materials.
• Allows users to channel sparks.
• Includes: 14" abrasive wheel, wrench.
Specifications
Volts:
120 V AC
Amps:
15.0 Amps
No-Load Speed:
3,800 rpm
Wheel Diameter:
14"
Capacity - Round:
5"
Capacity - Rectangle: 4-1/2" x 6-1/2"
Weight:
40 lbs.
DW871
General Purpose Cut-off Wheels
• Aluminum oxide grain.
• General Purpose cool cutting on thin
metals.
• Burr-free finish.
• SAI24034 rated to 5,100 max rpm;
SAI24039 rated to 4,400 max rpm;
• Packaged 10/box.
• Use for metal studding, thin rebar,
light gauge metals.
(Sold in full box quantities only)
Part No.
Description (in)
SAI23420
SAI23450
12"x 1/8" x 20mm
14"x 1/8" x 1"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
EZ-Chop™ Saw Blades
OnSite
Supply
• Type 1 shape for square, burr-free cutting,
• Externally reinforced with fiberglass
layers to withstand the toughest applications.
• SAI123420 rated to 6,300 max
rpm; SAI123450 rated to 5,400
max rpm.
• Packaged 10/box.
• For use on ferrous metals.
Pkg
10/box
10/box
Safety
(Sold in full box quantities only)
Part No.
Description (in)
Pkg
SAI24034
SAI24039
12"x 3/32" x 1"
14"x 3/32" x 1"
10/box
10/box
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Abrasives
Volts:
Amps:
No-Load Speed:
Metal/Wood Cutting:
Bevel Capacity:
Blade Diameter:
Capacity - O.D. Pipe:
Capacity - Square:
Capacity - Bar:
Maximum Opening:
Weight:
359
Rentals
Fasteners
Shears / Nibblers / Heat Guns
Shears
Nibblers
Anchors
6890
6852-20
6880
Strut
Swivel Head Shear
Threaded
Rod
• 6.8 amp Milwaukee motor, trigger speed
control: 0-2,500 rpm spindle speed.
• 360° swivel head.
• Ergonomic tactile grip for optimal user
comfort.
• 10 ft. flexible durable runner cord.
• Includes: Hex Wrench.
Specifications
Volts:
Amps:
No Load Speed:
Min. Cutting Radius:
Weight:
120 V AC
6.8 Amps
0-2,500 spm
7"
4.1 lbs.
Pipe
Hangers
Part No.
Description
6852-20
Swivel Head Shear
10 Gauge Nibbler
• 4.0 amp, 1,000 SPM.
• Cuts up to 8.75 ft. per minute.
• 1.65 in. starting hole required.
• AC-DC toggle switch allows for twohanded operation.
• 12 gauge capacity in stainless steel.
• Includes: Punch - 10 Gauge Die - 10
Gauge, Allen Wrench, Side Handle.
16 Gauge Nibbler
• 3.8 amp, 1,900 spm.
• Cuts up to 7 ft. per minute.
• 7/8 in. starting hole required.
• AC-DC paddle switch.
• Includes: Punch - 16 Gauge Die - 16
Gauge, Allen Wrench, Plate Wrench.
Specifications
Volts:
Amps:
No Load Speed:
Min. Cutting Radius:
Weight:
120 V AC
4.0 Amps
0-1,000 spm
2-1/2"
7.8 lbs.
Specifications
Volts:
Amps:
No Load Speed:
Min. Cutting Radius:
Weight:
120 V AC
3.8 Amps
0-1,900 spm
1-3/4"
4.8 lbs.
Part No.
Description
Part No.
Description
6880
10 Gauge Nibbler
6890
16 Gauge Nibbler
Tools
Heat Guns
Abrasives
8977-6
8975-6
8978-6
Variable Temperature Heat Gun
Variable Temperature Heat Gun
OnSite
Supply
• Variable temperature 200° to 1050° F
• Unique impact resistant heating element.
• Heat Adjustment Dial (1-6) for temperatures ranging from 200° to 1050° F.
• Electronic control allows extra reduction
of air flow for more accurate and concentrated heat location without damage
to heating element.
Specifications
Safety
Volts:
Amps:
Air Temperatures:
Air Volume:
Weight:
Part No.
Rentals
8978-6
360
120 V AC
12.5 Amps
200°F - 1050°F
14.8 cu. ft./min.
1.8 lbs.
Specifications
Specifications
Dual Temperature Heat Gun
Volts:
Amps:
Air Temperatures:
Air Volume:
Weight:
Part No.
Description
Variable Temperature Heat Gun
• Dual temperature 570° & 1000° F.
• Unique impact resistant heating element.
• Efficient soft air velocity increases surface temperature much faster.
• 3-position rocker switch - off, high & low.
• Variable temperature 140° to 1040° F
• Unique impact resistant heating element
• Efficient soft air velocity increases
surface temperature much faster than
conventional hot air heat guns.
• Rotate rear housing to select temperature.
• Includes: Heat Gun Accessory Assortment,
Carrying Case for 8975-6 and 8977-20
Heat Guns.
8975-6
Hartford, CT
800-969-0285
120 V AC
11.6 Amps
570°F/1000°F
14.8 cu. ft./min.
1.6 lbs.
Description
Dual Temperature Heat Gun
Boston , MA
800-645-6155
Volts:
Amps:
Air Temperatures:
Air Volume:
Weight:
Part No.
8977-6
120 V AC
11.6 Amps
140°F - 1040°F
14.8 cu. ft./min.
1.6 lbs.
Description
Variable Temperature Heat Gun
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
t Head & Handle Complete
p Head Only
Little Kicker® Offset Bender
1800 Mechanical
Bender for IMC & Rigid
Conduit
Capacity
Head & Handle
Head Only
Handle Only
½" EMT
840AH
840A
845H
¾" EMT
½" Rigid
841AH
841A
845H
1" EMT
¾" Rigid, IMC
842AH
842A
846H
1¼" EMT
1" Rigid, IMC
N/A
843F
846-1¼
• Ratchet action for increased
leverage.
• Bypass the ratchet for fast,
direct bending on smaller
sizes.
• Heavy-duty welded construction for long, reliable service.
• Built-in bending degree indicator and easy-to-use bending
charts for accurate, consistent bends.
Part No.
Description
• Heavy-duty cast steel head.
• Welded steel handle.
• Bend tight radius stub-ups.
Part No.
Description
508
512
516
Hickey for ½" Rigid Conduit
Hickey for ¾" Rigid Conduit
Hickey for 1" Rigid Conduit
Fasteners
OnSite
Supply
Mechanical bender for ½", ¾", 1" IMC & Rigid conduit
Mechanical bender for 1¼", 1½" IMC & Rigid conduit
Hickeys with Welded Handles
1818 Mechanical Bender for EMT, IMC, Rigid and
Aluminum Conduit
1818
Safety
• Bends a wide variety of types and sizes of conduit.
• Durable ratchet mechanism for easy bending.
• Bypass ratchet for fast direct bending of smaller sizes.
• Built-in bending degree indicator and easy-to-use bending charts for accurate, consistent bends.
• All shoes and accessories can be mounted to the frame unit and secured with chain & lock
• Heavy-duty undercarriage with wheels.
Part No.
Description
Mechanical bender for ¾" - 2" EMT Conduit, ½" - 1¼" IMC conduit and ½" - 1½"
Rigid and aluminum conduit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
361
Rentals
1800
1801
Threaded
Rod
• Heat treated aluminum construction. Lifetime Limited Warranty.
• Patented sight indicator is a key feature for bending angles fast
and easy.
• Non-slip contoured foot pedal for added leverage.
• Cast-in markings for stub-ups, saddle bends, back-to-back
bends and head-up or down bending.
• Cast-in offset multipliers.
Pipe
Hangers
Offset bender for ½" EMT
Offset Bender for ¾" EMT
SITE-RITE®
Aluminum Hand Benders
Tools
1810
1811
Abrasives
• Bends offsets in one easy operation. Insert conduit, depress
handle, release and remove conduit.
• Makes identical offsets every time for wall mounted boxes with
exposed conduit.
• Depress handle to create offset that matches knockout in box.
• Maximum offset of .56". (9/16")
• Mounting holes for permanent positioning.
• Includes 3/8" female hydraulic connector and dust cap.
Part No.
Description
Strut
Anchors
Mechanical Benders
Fasteners
Electric Benders
853
Anchors
853 Quad Bender™
855
855
Smart Quad Bender™
Strut
Threaded
Rod
Pipe
Hangers
• Two operating positions,
table-top and upright.
• Squeeze adjustment to
compensate for variations
in EMT conduit.
• Optional shoes available
to bend PVC coated steel
conduit.
• Adjustable leveler pads.
• Excellent portability.
Convenient lifting eyes.
• Weather resistant construction.
• Intelligent pendant controls: Standard (included), digital readout
and programmable bend angles for accurate repeat bends. Deluxe (optional) interactive control – calculates complete layout
measurements for various types of bends.
• Bends ½" to 2" EMT, IMC and Rigid and Rigid Aluminum conduit
without any shoe changes. No loose parts to get lost.
Part No.
Description
855
Smart Quad Bender for 1"-2" EMT,IMC and Rigid
conduit (includes Standard Pendant
Deluxe Pendant for older bender w/serial code ZW
Deluxe Pendant for current bender w/serial code ABL
38650
01711
Tools
854
854 Quad Bender™
Abrasives
OnSite
Supply
Safety
• Bends ½" to 2" EMT,
IMC and Rigid and Rigid
Aluminum conduit without
any shoe changes. No
loose parts to get lost.
• Two operating positions,
table-top and upright.
• Remote pendant switch
and bending charts for
easy, accurate bends.
• Squeeze adjustment to
compensate for variations
in EMT conduit.
• Adjustable leveler pads.
• Excellent portability. Convenient lifting eyes.
• Optional shoes available to bend PVC coated steel conduit.
Part No.
Description
854
Quad Bender for 1"-2" EMT,IMC, rigid and
Rigid aluminum conduit
Optional PVC Shoe unit ½" - 2"
01700
Rentals
362
Hartford, CT
800-969-0285
• Four-in-one shoe handles
1", 1¼", 1½", 2" EMT, IMC
and Rigid steel and aluminum conduit.
• No-shoe-change-out design
means excellent portability
at a competitive price.
• Quickly remove shoe and
bridge to reduce weight for
easy handling.
• Squeeze adjustment to
compensate for conduit
variations. Smooth, wrinkle-free bends.
Part No.
Description
853
37279
Quad Bender for 1"-2" EMT,IMC and Rigid steel
and aluminum conduit
Optional 40 mil PVC Shoe Group (only)
555® Deluxe Electric
Conduit Bender for ½"
thru 2" Conduit & Pipe
555
• Features unique electrical
controls that reduce the
inrush current to the relays
to minimize contact arcing
for longer-life.
• Fast and easy way to bend
up through 2" conduit.
• Remote pendant control and
bending data charts for easy
and accurate bending.
• Simple setup and easy
operation for correct and
consistent bends.
• Portable, includes handle,
excellent balance and heavy duty, urethane-filled puncture-proof
pneumatic wheels.
• Will make 180° one shot bends in ½" through 2" rigid conduit.
Part No.
Description
555
555R
555E
555I
37279
Boston , MA
800-645-6155
Deluxe Electric Bender power unit without
bending accessories.
Deluxe Electric Bender with Shoe Group for ½"
through 2" Rigid & ½" through 1¼" IMC conduit
and pipe, includes 28007 - ½" - 2" Rigid Shoe
Group.
Deluxe Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" 2" EMT Shoe Group.
Deluxe Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 1½" - 2" IMC Shoe Group.
Optional 40 mil PVC Shoe Group (only)
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1½" and 2" EMT Shoe Group consisting of the
Description
following (one each):
Classic
Electric
Bender
1½"
EMT
Bending
Shoepower unit without
bending
accessories.
EMT Bending
Shoe
2"
Classic
Electric
with Shoe
Group for ½"
2" Bender
Roller Support
Unit
1½" through
through 2" Rigid and ½" through 1¼" IMC con1½"
and pipe,
2" IMC
Shoe Group
the
duit and
includes
28007consisting
- ½" - 2" of
Rigid
following
(one
each):
Shoe Group.
Classic
Electric
Bender
1½"
IMC
Bending
Shoe with Shoe Group for ½"
through
2" EMT Shoe
conduit, includes 23802 - ½" 2" IMC Bending
2" EMT
Shoe 2"
Group.
1½"
through
Roller Support Unit
ClassicStorage
ElectricBox
Bender with Shoe Group for
Metal
1½" through 2" IMC conduit, includes 26330 ½" through 2" Rigid Shoe Group consisting of
1½" - 2" IMC Shoe Group.
the following (one each):
Optional 40 mil PVC Shoe Group (only)
½" through 1¼" Rigid/IMC Bending Shoe
½" through 1¼" Support Roller
1½" through 2" Rigid Bending Shoe
1½" through 2" Roller Support Unit
555
23499
23505
555R
23541
26330
555E
25263
25268
25273
555I
1723
28007
37279
00571
00936
17937
17984
37279
40 Mil PVC Coated Rigid ½" through 2" Shoe
Group consisting of the following (one each):
00946
00573
37281
37282
1723
½" through 1¼" Roller Support
½" through 1¼" Shoe
1½" and 2" Shoe
1½" through 2" Roller Support Unit
Metal Box
555E
Classic Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" -
2" EMT Shoe Group.
555I
Classic Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 1½" - 2" IMC Shoe Group.
37279
Optional 40 mil PVC Shoe Group (only)
Electrical Tools - Hydraulic Benders
884 / 885 Rigid Conduit Benders for One-Shot 90°'s in 1¼" - 5"
884 / 885
Specifications
Part No.
Anchors
884: 1¼" - 4" rigid conduit
884PVC: 1¼" - 4" 40 mil coated rigid conduit
885: 1¼" - 5" rigid conduit
980: 120VAC Electric Hydraulic Pump
980-22PS: 220VAC Electric Hydraulic Pump
884
884E980
884PVC
885
885E980
Philadelphia, PA
610-647-8070
Safety
Capacity:
Power source:
Strut
OnSite
Supply
• Strong, lightweight, portable, pin-assembled aluminum components.
• Easy-to-use ram travel scale and charts for accurate bends.
• Both 884 and 885 bend one-shot 90° in 1¼" - 4" rigid conduit. 885 includes 5" Segment
Rigid Conduit Bender.
• Optional shoes available to bend PVC-coated rigid conduit.
• Optional 1802 Bending Table available for easier operation.
Description
1¼" - 4" Rigid Conduit Bender w/o hydralic pump
1¼" - 4" Rigid Conduit Bender w/ 980 hydralic pump
1¼" , 1½", 2", 3" & 4" PVC-coated Rigid Conduit Bender w/o hydraulic pump
1¼" - 4" One-Shot & 5" Segment Rigid Conduit Bender w/o hydraulic pump
1¼" - 4" One-Shot & 5" Segment Rigid Conduit Bender w/ 980 hydraulic pump
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Shown with P/N 1807
Bending Degree Indicator
Hartford, CT
800-969-0285
363
Rentals
Threaded
Rod
23816
Part No.
• Features simple relay controls for easy field repairs and compact handle
design
to conprevent interference with conduit when
• Features
simple
relay
bending.
trols
for easy field repairs
• Fast
and easyhandle
way todesign
bend up through 2" conduit.
and compact
• Remote
pendant
controlwith
and bending data charts for easy and
to prevent
interference
accuratewhen
bending.
conduit
bending.
• Simple
setup
operation for correct and consistent
easyand
wayeasy
to bend
• Fast and
bends.
up
through 2" conduit.
• Portable,
excellent
balance
• Remote pendant
control
andand heavy duty wheels.
bending data charts for easy
and
Part No.
Description
accurate bending.
easy Electric Bender power unit without
• Simple
555 setup andClassic
operation for correct
and accessories.
bending
bends.Classic Electric Bender with Shoe Group for ½"
consistent
555R
• Portable, excellent
balance
through
2" Rigid and ½" through 1¼" IMC conand heavy duty wheels.
duit and pipe, includes 28007 - ½" - 2" Rigid
Shoe Group.
Part No.
Description
555E
Classic Electric Bender with Shoe Group for ½"
through
2" EMTBender
conduit,power
includes
555C
Classic Electric
unit23802
without- ½" 2" EMT Shoe
Group.
bending
accessories.
555I
Classic Electric Bender with Shoe Group for
Electric
with Shoe
Group
for ½"
555R
Classic
1½" through
2" Bender
IMC conduit,
includes
26330
Rigid
& ½"
through 1¼" IMC conduit
through
1½" - 2"2"
IMC
Shoe
Group.
pipe,40
includes
28007
½" - 2"
Rigid Shoe
37279
and
Optional
mil PVC
Shoe -Group
(only)
Group.
Pipe
Hangers
Description
• Features
controls
easy
field
repairs
and com 23802 simple relay
½" through
2" for
EMT
Shoe
Group
consisting
of
pact handle design
prevent (one
interference
thetofollowing
each): with conduit when
bending.
• Fast
17944
1¼"
EMT Bending
Shoe
½"tothrough
and easy way
bend up
through
2" conduit.
• Remote
17986 pendant ½"
through
Support
control
and1¼"
bending
dataRoller
charts for easy and
23499
1½" EMT Bending Shoe
accurate bending.
• Simple
23505 setup and2"easy
EMToperation
Bending Shoe
for correct and consistent
23541
1½" through 2" Roller Support Unit
bends.
1723
Storage
Metal
• Portable,
excellent
balance
and Box
heavy duty wheels.
Tools
Part No.
555
555® Classic Electric
Classic Electric Conduit Bender for ½" thru 2"
Conduit & Pipe for ½"
Conduit Bender
thru 2" Conduit & Pipe
Abrasives
®
Accessory Shoe Groups
555
Classic Electric Conduit Bender
for 555® Electric Benders
for ½" thru 2"
Conduit & Pipe
Fasteners
Electric Benders
Fasteners
Electric Benders / Accessories
881 Cam Trak® Bender
For 2½" to 4" EMT, IMC & Rigid
Anchors
• One bender for EMT, IMC and Rigid.
• Fast and easy setup on the jobsite.
• True One-Shot 90° bends with CT models for quick accurate bends
• Steel reinforced follow bars for long life.
• Bend one 90° in 4" Rigid conduit in 95 seconds.
• Optional 1813 Bending table and accessories for easier operation.
Shown with OPTIONAL
1813 Bending Table
881
Specifications
Strut
Capacity:
2½" - 4" EMT, IMC and Rigid
Power source: 980: 120VAC Electric Hydraulic Pump
980-22PS: 220VAC Electric Hydraulic Pump
Part No.
Description
1813
881CT
Threaded
Rod
Pipe
Hangers
Tools
Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3", 3½" & 4" EMT, IMC & Rigid conduit, w/o
hydraulic pump
881CT-E980 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3", 3½" & 4" EMT, IMC & Rigid conduit,
w/980 hydraulic pump
881CTD
Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3" & 4" EMT, IMC & Rigid conduit,
w/o hydraulic pump
881CTD-E980 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3" & 4" EMT, IMC & Rigid conduit,
w/980 hydraulic pump
881
Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½" & 3", Two-Shot 90° Bends in 3½" & 4" EMT,
IMC and Rigid conduit, w/o hydraulic pump
881-E980
Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½" & 3", Two-Shot 90° Bends in 3½" & 4"
EMT, IMC & Rigid conduit, w/980 hydraulic pump
881 Basic
Conduit Bender, w/o shoe groups or hydraulic pump
`
27554
27555
31281
27556
31274
27556
SHOE GROUPS
2½" One-Shot 90° EMT, IMC Rigid Shoe Group
3" One-Shot 90° EMT, IMC Rigid Shoe Group
3½" One-Shot 90° EMT, IMC Rigid Shoe Group
3½" 45° EMT, IMC Rigid Shoe Group
4" One-Shot 90° EMT, IMC Rigid Shoe Group
4" 45° EMT, IMC Rigid Shoe Group
1813 BENDING TABLE
1813
881A
Bending Table for 881 Bender,
converts 881 into bench production
style machine
Converts 884 or 885 to an 881
1802
Abrasives
882
Flip-Top® Benders
for 1¼" - 2"
EMT, IMC & Rigid
OnSite
Supply
Typical setup
shown
with bender
1802
882
• Choose 882 for EMT or
882CB models for EMT, IMC and Rigid Conduit.
• Simple, accurate & easy to use.
Safety
Part No.
Description
Bending Table for 884 & 885 Benders
882
• Make bending easier, faster and more accurate.
• Insert conduit to be bent in chain vise, tighten. Turn handle to
move the chain vise and position conduit for bending.
• Use the Bending Degree Protractor and the chain vise to advance
conduit while making segment and other multi-shot large sweep
bends.
• Includes Bending Degree Protactor and metal storage box.
• Includes pipe support pins for 884 & 885 Benders
Part No.
Description
882CB
882CB-H755
Flip-Top Bender for 1¼", 1½" and 2" EMT Conduit, w/o hydraulic pump
Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/o hydraulic pump
Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/755 Hand
Hydraulic Pump
Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/975 Electric
Hydraulic Pump
Flip-Top Bender for 1¼", 1½" and 2" EMT Conduit,
w/755 Hand Hydraulic Pump
Rentals
1802
364
882CB-E975
882-H755
Bending Table
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
980
960
Fasteners
Hydraulic Pumps
Anchors
755
Electric Hydraulic Pump w/
pendant
980-22PS Electric Hydraulic Pump
w/pendant switch
980-22FPS Electric Hydraulic Pump w/
foot switch
Dimensions:
Part No.
120VAC; 1½ hp
10,000 psi (700 bar);
300 inch per minute rapid
advance; 54 inch per minute
@ full pressure
12" L x 10¾" W x 225⁄16" H
Description
960 SAPS Electric Hydraulic Pump
975 Electric Hydraulic Pump
Hydraulic Hose Units
• For use with Greenlee hydraulic pumps.
Part No.
Description
Part No.
05850
17707
05851
05851
11289
37729
10' x ¼" hose with (1) ⁄8" male
coupler & (1) 3⁄8" female coupler
10' x ¼" non-conductive
hose with (1) 3⁄8" male coupler
& (1) 3⁄8" female coupler
25' x ¼" non-conductive
hose with (1) 3⁄8" male coupler
& (1) 3⁄8" female coupler
6' x 3⁄8" hose with (2) 3⁄8" male
couplers
10' x ¼" hose with (2) ¼"
male couplers
Philadelphia, PA
610-647-8070
3
975
Specifications
Operation:
Capacity:
Description
980
Description
High Pressure Hydraulic
Hand Pump
Tools
Dimensions:
Part No.
755
Manual - Hand
10,000 psi (700 bar);
0.161 in. per stroke
28½" L x 7" W x 6" H
• Equipped with couplers and dust caps.
37728
38316
06302
Washington D.C.
877-419-2755
Description
10' x ¼" hose with (1) 3⁄8"
male coupler & (1) ¼" male
coupler
6' x ¼" hose with (1) ¼"
male coupler & (1) ¼" NPT
thread
3' x ¼" hose with (1) ¼"
male coupler & (1) ¼" NPT
swivel threaded fitting
3' x ¼" hose with (1) ¼" NPT
male threaded fitting & (1) ¼"
NPT swivel threaded fitting
Boston , MA
800-645-6155
• For use with Greenlee 2" capacity benders.
• Automatic or manual ram-return selector
valve provides more control from the
pendant switch.
• Molded enclosure protects pump, motor
and circuitry in tough working environments.
• Use with single hose hydraulic systems
with spring-return rams.
Abrasives
Capacity:
980 -120VAC; 1½ hp.
980-22PS - 2020VAC; 1½
hp.
10,000 psi (700 bar); 250 in./
minute rapid advance; 18 in./
minute @ full pressure
12" L x 12" W x 17½" H
Operation:
Capacity:
Dimensions:
Part No.
OnSite
Supply
Operation:
• Usable oil volume: 6¼ qts.
• For use with all Greenlee benders.
• Solid-state controls for increased reliability.
• Low pressure for fast ram advance, aoutomatically changes to low-volume, high
pressure.
• Pendant control for advance, valve on pump
for release.
• Use with single hose hydraulic systems
with spring-return rams.
• Equipped with four swivel casters.
Specifications
Operation:
Capacity:
Dimensions:
Part No.
975
Hartford, CT
800-969-0285
120VAC; ½ hp
10,000 psi (700 bar);
250 inch per minute rapid
advance; 18 inch per minute
@ full pressure
12" L x 10" W x 15½" H
Safety
Specifications
Specifications
960 Electric Hydraulic Pump
Description
Electric Hydraulic Pump
365
Rentals
• For use with all Greenlee benders.
• Handy pendant advance control on 980 &
980-22PS. The 980-22FPS has a foot-control
switch.
• Automatic or manual ram-return selector
valve provides more control from the pendant switch.
• Molded enclosure protects pump, motor
and circuitry in tough working environments.
• Use with single hose hydraulic systems with
spring-return rams.
Pipe
Hangers
980 Electric Hydraulic Pump
Threaded
Rod
• Portable and powerful, for use with
Greenlee Benders.
• Versatile, operates in any position.
• Steel pump body and rubber hand grip.
• Wide base for stability.
• Mounting holes for permanent positioning.
• Includes 3/8" female hydraulic connector
and dust cap.
Strut
755
High Pressure Hydraulic Hand Pump
Fasteners
PVC Electric Heaters / Blanket
Anchors
847
848
849
857
851
860
Electric PVC Heaters/Benders
Strut
Threaded
Rod
• For ½" - 2", ½" - 4" and ½" - 6" PVC, all schedules.
• Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and form
bend.
• Heavy duty, insulated metal wall with reflective interior for fast, even heating..
• Full length doors for easy PVC loading and removal. Model 847 & 848 feature piano
hinged double-doors to allow heating of shorter lengths with one door open.
• Models 851, 847 & 848 feature wheels for easy mobility.
• Model 848 features motorized PVC rotation.
• Replacement Calrod Heating Elements are available.
849
Specifications
851
Pipe
Hangers
Capacity:
1½" - 4"
1½" - 2"
120VAC 20 Amp
120VAC 20 Amp
Power:
Size:
—
52"
Weight:
15 lbs,
53 lbs.
Wattage
—
2300
Part No.
Description
Tools
849
851
847
848
31092
857
847
848
1½" - 6
120VAC 30 Amp
71"
78 lbs.
6600
1½" - 6"
120VAC 30 Amp
71"
78 lbs.
6600
Electric PVC Heater for 1½" - 2"
Electric PVC Heater for 1½" - 4"
Electric PVC Heater for 1½" - 6"
Electric PVC Heater for 1½" - 6", with motorized PVC rotation.
Motorized rotation kit for Model 847
PVC roller support (optional)
860 PVC Heating Blanket
• Make bends, offsets or saddles in PVC
fast and easy.
• Easy to use; wrap blanket around PVC
secure with hook & loop strap.
• Built-in stiffeners help keep the blanket
tight to the PVC surface. Remove blanket
and form bend by hand.
• Controlled, even heating for uniform
bending.
• Temperature over 300° F.
• All schedules
Specifications 8601½
3
4
Capacity: Up to 1½"
2"-3"
3½"-4"
Power:
120VAC 120VAC 120VAC
Size:
13"x 8¼" 30"x 13¼" 38"x 16¼"
Weight:
1.7 lbs,
3.3 lbs.
4.9 lbs.
Wattage
200
800
1300
Part No.
Description
860-1-½ PVC Heating Blanket for up
to 1½"
PVC Heating Blanket for 2"-3".
860-3
860-4
PVC Heating Blanket for 3½"-4".
Hydraulic Oil
Abrasives
PVC Plug Set
• Greenlee-approved
hydraulic oil.
• Specially compounded for use with
Greenlee hydraulic
equipment.
Part No.
Description
OnSite
Supply
4016GB
4017GB
Safety
Protractor with
Magnetic Base
Part No.
1895
Rentals
366
Hydraulic Oil -1 Gallon
Hydraulic Oil -1 Quart
Description
Protractor with Magnetic Base
Mini Magnetic Bubble Level
• Professional grade level with bending
offset aid.
• Mini torpedo design with “no-dog” attachment for bending.
• Three rare earth magnets for superior
holding strength.
• Four vial design - 0°, 90°, 45° and 30°.
• Machined from aluminum alloy and anodized to aircraft specifications.
• V-groove on top of level for easy view of
vials.
Part No.
Description
L77
Hartford, CT
800-969-0285
Mini Magnetic Bubble Level
Boston , MA
800-645-6155
• Use with PVC
Heating Blankets or Electric
Heaters to plug
the ends of
the PVC being
heated. The
trapped air will
keep the PVC
from collapsing
while forming
the bend.
• Use on Schedule 40 and 80 PVC.
• Set includes (2) each of 2", 2½", 3" and 4"
plugs with plastic carrying case.
• 5" and 6" plugs available seperately.
Part No.
859-4
30980
30981
Description
PVC Plug Set, incl: (2) each of
2", 2½", 3" and 4" plugs with
plastic carrying case
PVC Plug, 5"
PVC Plug, 6".
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
BENDING
77 Series Electric Conduit Bender for ½" thru 2" Conduit & Pipe
• Powerful motor will make 180° bends on up to 2” rigid conduit
• Rugged and dependable electrical system
• Easy to maintain
• Handle pivots to allow for dogleg bends
• Shoes and roller support assemblies will fit Greenlee’s® 555® electric bender*
• Two year warranty
Strut
Specifications
Dimensions:
24.5" D x 29.5" W x 42" H
Part No.
Description
77
77RIG
77EMT
77IMC
77PVC
Electric Bender Power Source only (no shoes)
Electric Bender with No. 700R Rigid shoes & accessories
Electric Bender with No. 700E EMT shoes & accessories
Electric Bender with No. 700I IMC shoes & accessories
Electric Bender with No. 700P 40 mil PVC coated conduit bending
shoes & accessories
Electric Bender with No. 700E, No. 700I, & 700R 660 shoes & accessories (EMT, IMC & Rigid
77COM
Pipe
Hangers
700P 1/2" - 2" 40mil PVC Coated Rigid Shoe Group
Wt.
(lbs.)
Item
#
Cat.
No.
1
2-1501
1/2” - 1-1/4” EMT bending shoe
1
2-2001
1/2”- 1-1/4” PVC coated rigid bending shoe
23
2
2-1004
1/2”- 1-1/4” PVC coated rigid support roller
8
Description
2
3
2-2101
1-1/2” & 2” PVC coated rigid bending shoe
37
4
2-1005
1-1/2” & 2” PVC coated rigid support roller
6
not
shown
8-0501
36
700E 1/2" - 2" EMT Shoe Group
Wt.
(lbs.)
Item #
Cat.
No.
1
2-1501
1/2” - 1-1/4” EMT bending shoe
2
2-1003
1/2” - 1-1/4” EMT support unit
3
2-1601
1-1/2” EMT bending shoe
23
4
2-1701
2” EMT bending shoe
31
5
2-1100
1-1/2” - 2” EMT support roller unit
40
not shown
8-0501
Description
2
6
Metal storage box
36
OnSite
Supply
Metal storage box
Tools
SHOE GROUPS
Abrasives
77RIG:1/2’’ to 2” Rigid conduit and 1/2’’ to 1 1/4” IMC conduit
77EMT: 1/2’’ to 2” EMT conduit
77IMC: 1 1/2’’ to 2” IMC conduit
77PVC: 1/2’’ to 2” 40 mil PVC coated conduit
Threaded
Rod
Power Source: 120 vac; 20 amp
Capacity:
Fasteners
Current Tools
Cat.
No.
1
Description
Wt.
(lbs.)
Item
#
Cat.
No.
Wt.
(lbs.)
Description
2-1801
1-1/2” IMC bending shoe
22
1
2-1301
1/2”- 1-1/4” Rigid and IMC bending shoe
2
2-1901
2” IMC bending shoe
29
2
2-1001
1/2”- 1-1/4” Rigid and IMC support roller
3
2-1200
1-1/2” & 2” IMC support roller unit
40
3
2-1401
1-1/2” and 2” Rigid bending shoe
37
not shown
8-0501
36
4
2-1002
1-1/2” and 2” Rigid support roller
6
Philadelphia, PA
610-647-8070
Metal storage box
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
23
8
367
Rentals
Item #
Safety
700R 1/2" - 2" Rigid Shoe Group
700I 1-1/2" - 2" IMC Shoe Group
Fasteners
Current Tools Pullers / KNOCKOUT SETS
Piece Maker™ 1/2" - 2"
Hydraulic Knockout Set
Anchors
• Designed to split the slug in two
pieces for easy removal
• Requires less force than conventional punches
• Fast set-up
• High-strength steel punches and
dies for long life
• Reduces punch time versus
manual or ratchet methods
• Unique hand pump design with
heavy duty ram
• Designed to punch a maximum of
10 gauge ( .134” ) mild steel
• Compare with Greenlee® SlugBuster® Models 7306SB and
7310SB*
Strut
Threaded
Rod
Part No.
Mantis™ Mobile Cable Pulling Package
Pipe
Hangers
• Excellent Mobility
• Easy set-up
• Transport without complete disassembly
• Pulls up to 20’ extra cable
• 8,000# capacity
• Fits through 32” doorway
• Will fit Greenlee® Model 6001 Super Tugger® and 640 Tugger®
Part No.
8890A
Description
Mantis™ Mobile Cable Pulling Package w/Model 88
Cable Puller
Tools
High Speed Cable Puller
Abrasives
• Rolling base for easy mobility
around jobsite
• Folds for compact transport and
storage
• Quick release conduit couplings
• Integral heavy duty two speed motor
• Permanently lubricated vent free
gearbox
• Integral foot switch
• Lightweight – Less than 70 lbs.
• 3,000 lb. pulling force
• Complete system – no extra parts
to purchase
• Compare to Greenlee® Model #UT2
152PM
Description
1/2" – 2" Piece Maker™ Hydraulic Knockout Set
2-1/2" - 4"
Knockout Punch
and Die Set
• 4 point punch design
for easy slug removal
• Fast set-up
• High strength steel
punches and dies for
long life
• Reduces punch time
versus manual or
ratchet method
• Designed to punch a
maximum of 10 gauge ( .134” ) mild steel
• Compare with Greenlee® Model 7304
Part No.
156
Description
2-1/2" – 4" Knockout Punch and Die Set
Heavy Duty Piece
Maker™ SS
Knockout Sets for
Stainless Steel
OnSite
Supply
• Punch holes in 16
gauge to 10 gauge
stainless steel
• Designed to split the
slug into two pieces for
easy removal
• Punches are manufactured from tool steel
for high strength and
long life
• Requires less force than conventional punches
• Compare with Greenlee® Slug-Splitter® Models 7307 and 7506
Safety
Part No.
Part No.
33
Rentals
368
Description
161SS
High Speed Cable Puller - 3000 lb. Capacity
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
1/2" – 2" HD Piece Maker™ SS Hydraulic Knockout
Set for Stainless Steel
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
369
Fasteners
Rentals
Safety
OnSite
Supply
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
Strut
Anchors
Punch & Driver Sets
Fasteners
Punch & Driver Sets
Anchors
Strut
Threaded
Rod
7235BB Slug-Buster®
Manual Knockout Kit
7304 Manual
Knockout Kit
• ½" to 1¼" Conduit size.
• Includes punches and dies for
the following sizes: ½", ¾" 1"
and 1¼".
• Rugged plastic carrying case.
• 2½" through 4" Conduit size.
• Includes punches and dies for
the following sizes: 2½", 3",
3½" and 4".
• Rugged plastic carrying case.
Part No.
7235BB
Description
Slug-Buster® Kit
Part No.
7304
Description
Standard Kit
737BB / 7235BB
Slug-Buster® Manual
Knockout Kit
7238SB Slug-Buster®
Manual Knockout Kit
with Ratchet Wrench
Pipe
Hangers
• 1½" and 2" Conduit size.
• Includes punches and dies for
the following sizes:1½" and 2".
• Available in either standard or
Slug Buster® style
• Rugged plastic carrying case.
• ½" to 2" Conduit size.
• Includes punches and dies for
the following sizes: ½", ¾" 1",
1¼". 1½" and 2".
• Hex ratchet wrench allows use
with both 3/8" and ¾" draw
studs.
• Rugged plastic carrying case.
Part No.
Part No.
7235BB
737BB
Description
Slug-Buster® Kit
Standard Kit
7238SB
Description
Slug-Buster® Kit w/
Ratchet wrench
Tools
Quick Draw® Hydraulic
Punch Driver Kits
Abrasives
7310SB
SLUGBUSTER®
Ram & Hand Pump Hydraulic Driver Kits
OnSite
Supply
• Fast, easy and simple to operate.
• Compact design for use on construction sites and maintenance jobs.
• Punches 10X faster than wrench method.
• Can be used with most standard round Slug-buster® and SlugSplitter® punches. (Not ½", 9/16" or 5/8") Can be used with nonround punches. (Adapter may be required)
• Powerful 11-ton hydraulic ram with 3' hose.
Safety
Rentals
Part No.
Description
7646
Driver with hand pump, draw studs, spacer &
plastic case.
Driver, hand pump, ½" through 2" Slug-Buster®
conduit size punches, dies and draw studs,
adapter, spacers, Kwik Stepper® Step bit &
plastic case.
Driver, hand pump, Slug-Buster® conduit size
punches, dies & draw studs, ½" through 2" and
2½" through 4" standard conduit size punches, dies
& draw studs, adapter, spacers, Kwik Stepper®
Step bit & steel case.
7306SB
7310SB
370
Hartford, CT
800-969-0285
• Compact, lightweight design
for portability and fast, easy
one-person operation.
• 8 tons of hydraulic force for
punching up to 10 ga. steel.
• Quick Draw® - perfect for fast,
straight-on front panel punching.
• Quick Draw® Flex allows
unlimited driver orientation to
simplify access to work area.
• Quick Draw® 90° right angle
driver head rotates over 180° for maximum flexibility in tight areas.
Part No.
Description
7804SB
Quick Draw® Driver, includes: 2 draw studs, 1
adapter, 1 spacer & case.
Quick Draw® Driver Kit, includes: Quick Draw®
driver, ½" through 2" Slug-Buster® conduit size
punches & dies, 2 draw studs, 1 adapter, 1
spacer & case.
Quick Draw® Flex Driver Kit, includes: Quick
Draw® Flex driver, ½" through 2" Slug-Buster®
conduit size punches & dies, 2 draw studs, 1
adapter, 1 spacer & case.
Quick Draw® 90° Driver, includes: 2 draw
studs, 1 adapter, 1 spacer & case.
Quick Draw® Driver 90° Kit, includes: Quick
Draw® 90° driver, ½" through 2" Slug-Buster®
conduit size punches & dies, 2 draw studs, 1
adapter, 1 spacer & case.
7806SB
7706SB
7904SB
7906SB
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
7506
½" through 2" Conduit Size Slug-Splitter SC Knockout Punch Kit.
Strut
Description
1725
Threaded
Rod
Slug Buster® Knockout Punches
• Easily punch mild steel through 10 gauge, aluminum, fiberglass
or plastic.
• Unique punch profile also splits slugs for easier removal.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Uses standard Greenlee dies and draw studs.
• Available in sizes up through 2.52".
Conduit/
Pipe
Size
½"
¾"
1"
1¼"
1`½
2"
767
Actual
Hole
Size
Complete
Punch Unit
P/N
Punch
Only
P/N
Die
Only
P/N
Manual Draw
Stud Only
P/N
7
/8"
1.115"
1.362"
1.701"
1.951"
23/8"
7211BB-½
7211BB-¾
7211BB-1
7211BB-1-¼
7211BB-1-½
7211BB-2
721-½
721-¾
721-1
721-1-¼
721-1-½
721-2
14722
124AV
126AV
128AV
440AV
442AV
00042
249AVBB
249AVBB
249AVBB
304AVBB
304AVBB
Pipe
Hangers
Part No.
7506
Tools
• Designed for Stainless Steel applications
• Features Slug-Splitter SC (Self Centering) Knockout Punches with capacity up through
10 gauge stainless steel.
• Self-centering punch aligns itself on pilot hole.
• Fast, easy and simple to operate.
• Compact design makes this the perfect tool for use on construction sites and maintenance jobs.
• Will also drive 751 Cable Cutter head
• Powerful 11 ton hydraulic ram with 3 foot hose.
Anchors
Slug-Splitter SC™ Ram & Hand Pump Hydraulic Driver Kit
Fasteners
Knockout Punches and Pumps
Standard Knockout Punches
Specifications
Capacity:
6,500 psi (446 bar),
.117 in. per stroke
Part No.
Description
1725
767
Hydraulic Foot Pump
Hydraulic Hand Pump
Philadelphia, PA
610-647-8070
½"
¾"
1"
1¼"
1`½
2"
2`½
3"
3`½
4"
5
Washington D.C.
877-419-2755
Abrasives
Actual
Hole
Size
Complete
Punch Unit
P/N
Punch
Only
P/N
Die
Only
P/N
Manual Draw
Stud Only
P/N
7
/8"
1.115"
1.362"
111/16"
115/16"
23/8"
27/8"
3½"
4"
4½"
55/8"
71BB
72BB
73BB
74BB
75BB
76BB
738BB
739BB
741BB
742BB
743BB
121AV
123AV
125AV
127AV
439AV
441AV
1429AV
1431AV
2982AV
2984AV
5135AV
14722
124AV
126AV
128AV
440AV
442AV
1430AV
1432AV
2981AV
2983AV
5136AV
00042
249AVBB
249AVBB
249AVBB
304AVBB
304AVBB
1434AV
1434AV
3026AV
3026AV
3026AV
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
371
OnSite
Supply
Foot Pump
• Leaves both hands to position and hold
the working tool.
• Foot activated release lever.
• Angled base bar keeps unit upright and
stable.
• Includes female coupler with dust cap.
Conduit/
Pipe
Size
Safety
Hand Pump
• Lightweight and portable for use with
Greenlee Punch Drivers.
• Versatile , operates in any position,
single speed.
• Mounting holes for easy, permanent
mounting.
• Easily punch mild steel through 10 gauge, aluminum, fiberglass or
plastic.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Makes clean, fast and accurate holes.
• Available in sizes up through 5.675"
• Round Standard Metal Punch Units are complete units consisting of
punch, die & draw stud.
Rentals
Hydraulic Pumps
Fasteners
Draw Studs for Knockout Punches
Anchors
Replacement Draw Studs for Manual Drivers Selection Guide
• Refer to the full scale pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
Strut
340AVBB — 3/4" x 2-15/16"
Threaded
Rod
Pipe
Hangers
00042 — 3/8" x 2-5/8"
Tools
Abrasives
249AVBB — 3/4" x 2-1/8"
OnSite
Supply
Safety
1675AV — 1/4" x 1-3/8"
1434AV — 3/4" x 5-1/2"
3026AV — 1-1/8" x 7-1/2"
Rentals
372
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Replacement Draw Studs for Hydraulic Drivers Selection Guide
Fasteners
Strut
• Refer to the full scale pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
Anchors
Draw Studs for Knockout Punches
1614SS — 3/8" x 2-13/16"
Threaded
Rod
1557AA — 11/8" x 3"
33967 — 3/4" x 17/8"
Pipe
Hangers
29451 — 7/16" x 4-1/4"
29452 — 3/4" x 5-1/2"
12099 — 3/4" x 4-3/4"
OnSite
Supply
Replacement Draw Studs for Ratchet Drivers
Selection Guide
Abrasives
Tools
2113B — 3/4" x 5-3/8"
Safety
249AVBB — 3/4" x 2-1/8"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
373
Rentals
12097 — 3/8" x 3-1/2"
Fasteners
Stud Punches / Accessories
Anchors
Manual Stud Punches
Strut
Threaded
Rod
Structural Stud Punch
Pipe
Hangers
• Punch 16 & 18 gauge structural studs in
5 seconds.
• Punch 200 holes per 12V NiCad battery,
2 batteries included, reducing downtime.
• Punches 1.34 diameter hole in 16 gauge
steel. Use with Greenlee 712A bushings.
• Swivel head rotates 360° for use in tight
corners.
• Lightweight, 9.2 lbs., tool provides
heavy-duty performance.
Part No.
• Punch up through 20 gauge steel studs
in one stroke.
• Rolls edge over for smooth installation of
armoured cable.
• Contoured hande design gives operator
better leverage and makes it possible to
punch in tight places.
• Automatically centers holes on standard
studs.
Part No.
724
Description
1¼" Diameter Stud Punch
Metal Stud Punches
• Punch up through 20 gauge steel studs
in one stroke.
• Aluminum head provides strength with
minimum weight.
• Contoured hande design gives operator
better leverage and makes it possible to
punch in tight places.
• Self-stripping design eliminates punch
hang-ups.
• Automatically centers holes on standard
studs.
Part No.
Description
Deburring Tool
ESP710-11 Structural Stud Punch, incl's.
2-batteries, 120V charger.
709
710
121AV
22286
24823
21297
Description
/8" Diameter Stud Punch
111/32" Diameter Stud Punch
Replacement Punch for 709
Replacement Die for 709
Replacement Punch for 710
Replacement Die for 710
7
Tools
Abrasives
Before
After
Bushings for Metal Stud Punches
OnSite
Supply
• Triple lock design holds bushing securely.
• Locks securely into metal studs from 24
gauge to 12 gauge.
• Helps protect wire insulation from sharp
edges of metal studs.
• Makes pulling smooth and easy by preventing hang-ups of cable on raw metal
edges.
Safety
Part No.
711C
Description
Bushings for 7/8" diameter
hole - 100 per pkg.
712A100 Bushings for prepunched
hole or 111/32" diameter hole
- 100 per pkg.
Rentals
374
Deburring Tool
Plumber Stud Punch
• Cleans burrs from both sides of hole in
seconds, saving time and labor.
• Works with any hole size or shape ¾" or
larger, in up to 10 gauge metal.
• Helps protect wire insulation from sharp
edges of metal studs.
• Makes pulling smooth and easy by preventing hang-ups of cable on raw metal
edges.
• Punches 25/8" diameter hole in metal
studs for professional-looking installation
of 2" water, vent and waste pipes.
• 2-speed lever action for fast, easy
punching of 24 to 20 gauge thick metal
studs.
• High strength aluminum alloy frame
provides lightweight, easy handling.
• Lever action punch retraction strips
punch out of metal stud fast and easy.
Part No.
11170
11180
Hartford, CT
800-969-0285
Description
Deburring Tool, 3/8" chuck
Replacement Cutter, 3-pack
Boston , MA
800-645-6155
Part No.
713
Description
Plumber Stud Punch
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Strut
Anchors
Fish Tapes
Kwik Silver™ Steel Fish Tapes
Part No.
Part No.
Description
Part No.
FTS438-65
Description
FTN536-50 50' x 3/16" diameter Nylon
Fish Tape in Winder Case
FTN536-100 100' x 3/16" diameter Nylon
Fish Tape in Winder Case
65' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
FTS438-125 125' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
FTS438-240 240' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
Threaded
Rod
VDV Flat-Steel Fish Tape
• Flat steel tape reaches easily above ceilings, under carpets and through walls to
install wire.
• 25' long, extending your reach.
• Winder case with crank handle for easy
compact storage.
Description
438-2X
VDV Flat-Steel Fish Tape
Pipe
Hangers
Nylon Fish Tapes
• Co-extruded, curl-resistant nylon fish tape
fishes equally well in large or small conduit.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
• Heavy-duty winder case.
• 250 lb. pulling strength.
• Plated fish tape wire is corrosion resistant
and as strong as conventional steel tape.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
• Self-tensioning case for easy tape winding.
• Wide, impact resistant re-winder case
with view ports to ensure tape fit and
restraining strap on inside to hold tape
secure.
439-1
Tools
439-2
Flex-O-Twist™
• Helps guide 1/8" steel tapes through
sharp bends.
• Thread on end of the fish tape in place of
the swivel ball head.
Part No.
Description
FTF540-50 50' x 0.175" Fiberglass Fish
Tape in Winder Case
Philadelphia, PA
610-647-8070
Silver Streak Steel Fish Tapes
• Stainless steel fish tape lasts longer and
rewinds easier. Rust & corrosion-resistant.
• Includes Speed Flex™ leader silver soldered onto the fish tape.
• Self-tensioning case for easy tape winding.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
Part No.
Description
FTSS438-100 100 x 1/8" x 0.060" Stainless
Steel Fish Tape w/ case
FTSS438-200 200 x 1/8" x 0.060" Stainless
Steel Fish Tape with case
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
439-1
Description
Flex-O-Twist™
SpeedFlex™
• Silver-solder joint attaches to any 1/8" x
.060" steel fish tape to provide a a slim
profile that fishes farther and faster.
• High strength, stainless steel cable used
for reliability and long-life.
• Beveled edges on leader reduces possibilities of hangups.
• Up to (6) #10 wires may be attached to
the large pulling eye.
Part No.
439-2
Hartford, CT
800-969-0285
OnSite
Supply
Part No.
™
Safety
• Non-conductive fiberglass tape with low
friction coating.
• Unique non-coiling properties enable it to
fish equally well in large or small conduit,
even with existing wire or cable in place.
• Unique lightweight reel for easy positive
feed out and rewind.
• Excellent for installation of telecommunications and data cables in overhead
plenums, above suspended ceilings and
under floors.
• Fastest manual fish tape available.
Intended for fishing only, not recommended for pulling.
Description
SpeedFlex™
375
Rentals
Fiberglass Fish Tapes
Abrasives
Flexible Fish Tape Leaders
Fasteners
Fish Tapes and Accessories
Anchors
EZ Reach™ Fish Stix
• Fish Stix kit with bullet nose and “J” hook threaded tips,
packaged in clear plastic tube.
• Highly visible green ¼" fiberglass rods provide added rigidity when multiple sections are threaded together.
• 200 lb. minimum pulling strength.
• Includes one 3' Glo-Stix™ section for improved tip visiblity.
Part No.
Strut
540-24
Description
24' Fish Stix™ - (3) 6' and (2) 3' sections.
Conduit Measuring Tapes & Dispenser
Threaded
Rod
• Fish and measure conduit runs in one
operation.
• Permenantly printed measurements every
foot from 0' to 3000'.
• Made from strong waterproof polyester.
• Pay-out dispenser has anti-skid pads,
handle and built-in cutter.
Part No.
Pipe
Hangers
434
Poly Line
Description
Pay-Out Dispenser for 435
Conduit Measuring Tape.
Conduit Measuring Tape;
3
/16" x 3000', 130 lbs.
breaking strength
435
CableCaster™
Tools
• Significantly speeds up installation of lightweight communications cable through hardto-reach spaces such as suspended ceilings,
rafters and sub-floors.
• 50' range allows for faster installations
with fewer pulls.
• Glow-in-the-dark darts are easy to locate in
dark areas.
• Add flashlight (i.e. Mini-Maglite) for easier
visibility.
Part No.
06186
06259
• Ready-to -use, pre-punched hole in lid with
resealable cap.
• Use directly from the container.
• Resists tangling when dispensing.
• Use to pull rope through conduit.
Part No.
430
431
Description
CableCaster™
Replacement Darts - 4 pk.
Fish LIne
Abrasives
Polyester Measure/Pulling Tapes
OnSite
Supply
• Durable, stretch-resistant tape for easily
pulling and installing wire and fiber optic
cables within PVC and HDPE ducts.
• Factory-lubricated to reduce burnthrough in innerduct.
• Easy-to-read footage markings for quick
and accurate measurements.
• Available in various tensile strengths for
use in any application.
Part No.
4435
Safety
Rentals
Polyester Measure/Pulling
Tape; ½" x 3000', 1,250 lbs.
breaking strength
Polyester Measure/Pullin
Tape; 5/8" x 3000', 1,800 lbs.
breaking strength
Polyester Measure/Pulling
Tape; ¾" x 3000', 2,500 lbs.
breaking strength
4436
4436
376
Description
Fish Tape Power Winder
• Adapts Greenlee fish tapes to rewinding
with a battery drill.
• Fits all Greenlee Fish tapes sized 100' to
240'.
• Spoke design allows rewinding manually
or with battery power.
• Snaps in and out of fish tapre easily
• Includes 3⁄8" drive hex socket with storage
for adapter molded into Power Winder.
Part No.
438PW
Hartford, CT
800-969-0285
Description
Poly Line, 6,500', Green Tracer
210 lb capacity
Poly Line, 5,200', Yellow Tracer
240 lb. capacity
Description
Fish Tape Power Rewinder
Boston , MA
800-645-6155
• Strong, lightweight nylon.
• 595 - Center feed for fast
payout without tangling.
Use with Might Mouser®
blow gun.
• 604, 605, 606 and 607
Specially wound to payout
fast from outside without
tangles.
• Mildew-resistant. May
be left in run with wire to
provide a means to add
wire later.
Part No.
595
604
605
606
607
Description
Fish line. Center payout.
Use with Mighty Mouser®
blow gun. 2,150 ft./85 lb.
strength.
Fish line. Outside payout.
2,200 ft./85 lb. strength.
Fish line. Outside payout.
2,750 ft./45 lb. strength.
Fish line. Outside payout.
1,700 ft./72 lb. strength.
Fish line. Outside payout.
1,350 ft./90 lb. strength.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Model 390
Li'l Fisher® 390 Power Fishing System
Anchors
• Blows & vacuums fishline, polyline or measuring tape through conduit runs.
• Durable and compact 5 gallon tank.
• Power unit detaches easily to remove water and/or debris.
• Capacity: ½" - 2" conduit with optional accessory kit (2½" - 4" with optional foam pistons).
Li'l Fisher® 390 Specifications
390
392
Description
Li'l Fisher® Power Vacuum/Blower Fishing System. (Includes only unit and
38624 hose)
Power Fishing System Accessory Kit: includes (1) Fishline, 85 lb. pulling
strength, 2,150' long; (1 ea.) Piston for ½", ¾", 1", 1¼", 1½", & 2" conduit;
(1) Adapter nozzle for Measuring Tape; (10) ½" Conduit x 150' Line Pkg.;
(5) ¾" Conduit x 300' Line Pkg.; (5) 1" Conduit x 200' Line Pkg.; (1) Accessor
Container Lid; (1) Accessory Container; (1) ½"-1" Cone Adapter; (1) 1¼" 2½" Cone Adapter.
Threaded
Rod
Part No.
19 lb.
101.2 cfm
137.1 inches of water
120VAC ½ H.P.
Strut
Weight:
Air Flow:
Vacuum Lift:
Power Source:
Fasteners
Fish Tapes and Accessories
Model 690
Tools
• Rugged self-contained unit includes everything you need to blow or vacuum fishline,
polyline or measuring tape through conduit runs.
• Durable tank and accessory storage box are corrosion, chemical & impact resistant
polyethylene.
• Designed for the jobsite; 10' long hose, large heavy-duty wheels & removeable accessory box.
• Large 11 gallon tank makes the 690 excellent for vacuuming debris and water.
• Includes the following: (1) Fishline 85 lb. pulling strength, 2,150' long; (1 ea.) Piston
for ½", ¾", 1", 1¼", 1½", 2", 2½" IMC, Rigid, 2½" EMT, 3" IMC, Rigid, 3" EMT, 3½"
IMC, Rigid, 3½" EMT, 4" IMC, Rigid, 4" EMT conduit; (1) Adapter cone for 1¼ "- 2½"
conduit; (1) Adapter cone for ½" - 1" conduit; (1) Adapter cone for 3 "- 4" conduit; (1)
Adapter nozzle for tape & line; (1) Storage box; (1) Blower & vacuum unit; (1) Tank
with casters; (1) Flexible hose, 1½" x 10'; (1) Outer filter bag; (1) Inner filter bag; (10)
½" Conduit x 150' Line Pkg.; (5) ¾" Conduit x 200' Line Pkg.; (5) ¾" Conduit x 450'
Line Pkg.; (5) 1" Conduit x 200' Line Pkg.; (5) 1" Conduit x 450' Line Pkg.
Pipe
Hangers
690 Vacuum/Blower Power Fishing System
Model 591
Capacity:
Air Flow:
Vacuum Lift:
Power Source:
Weight:
Description
591 Portable
Blower Power Fishing System
• Powerful, will blow line or measuring
tape in up to 6" conduit.
• Portable, lightweight blower includes
shoulder strap for easy carrying and
leave operator's hands free.
• Efficient, includes Mighty Mouser® blow
gun for fast, easy line blowing.
• Includes: (1) Mighty Mouser® blow gun;
(1) Fishline 85 lb. pulling strength,
2,150' long; (1 ea.) Piston for ½", ¾", 1",
Philadelphia, PA
610-647-8070
1¼", 1½", 2", 2½" IMC, Rigid, 2½" EMT,
3" IMC, Rigid, 3" EMT, 3½" IMC, Rigid,
3½" EMT, 4" IMC, Rigid, 4" EMT conduit;
(1) Adapter cone for 1¼ "- 2½" conduit;
(1) Adapter cone for ½" - 1" conduit;
(1) Adapter cone for 3 "- 4" conduit; (1)
Adapter nozzle for tape & line; (1) Storage
box; (1) Blower & vacuum unit; (1) Flexible
hose, 1½" x 1'; (1) Flexible hose, 1½" x
4'; (1) hose clamp; (1) Portable blower;
(10) ½" Conduit x 150' Line Pkg.; (5) ¾"
Conduit x 200' Line Pkg.; (5) ¾" Conduit x
450' Line Pkg.; (5) 1" Conduit x 200' Line
Pkg.; (5) 1" Conduit x 450' Line Pkg.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Portable Blower Specifications
OnSite
Supply
690 Power Vacuum/Blower Fishing System.
Capacity:
½" - 4" conduit. (5" &
6" with optional foam
pistons)
Power Source: 120VAC 20 Amp
Weight:
34 lb.
Part No.
591
16646
Hartford, CT
800-969-0285
Description
Portable Blower Power Fishing
System
Accessory Adapter for 5"
- 6" conduit
377
Safety
690
½" - 4" conduit. (5" and 6" with optional foam pistons)
120 cfm
110 inches of water
120VAC
50 lb.
Rentals
Part No.
Abrasives
Model 690 Specifications
Fasteners
Power Fishing Accessories / Cable Pullers
Portable Blower Specifications
Capacity:
Anchors
Mighty Mouser® Blow Gun Kit
½" - 4" conduit. (5"
& 6" with optional
accessories)
Power Source: Use with blower power
fishing systems.
• Compact, self-contained Lexan® thermoplastic blow gun holds a 2,150' package
of 85 lb. breaking strength fish line.
• Mighty Mouser® blow gun and accessories fit into compact sturdy metal case.
• Kit includes all items included with Model
591 Portable Blower Power Fishing System
except Portable Blower & 4' hose
Part No.
Conduit Pistons
Part No.
592
691
16646
Strut
Threaded
Rod
• Use with power fishing systems to pioneer the line through the conduit run.
• Flexible foam body for an air-tight seal.
• Color-coded end disk with embossed
size markings for fast, easy selection.
• Strong steel center rod with loops on
both ends.
• Pistons available for all types and sizes
of conduit ½" through 6".
S2613
34317
Pipe
Hangers
Electrical Tools - Cable Pullers
Description
Might Mouser® Blow Gun Kit.
Might Mouser® Blow Gun (only)
Accessory adapter for 5" - 6"
conduit.
Description
Piston Set. Includes (1 ea.) of
the following: ½", ¾", 1", 1¼",
1½" and 2" EMT, MC, and
Rigid conduit.
Piston Set. Includes (1 ea.) of
the following: 2½", 3", 3½",
and 4" EMT conduit.
Individual Conduit Pistons
Part No.
No.
Tools
2,000 lbs!
Abrasives
Ultra Tugger® 2 Cable Puller - Rated to 2,000 lbs.
• Easy mobility designed for one person to easily transport, set up and teardown.
• Adjustable, telescoping boom and pivoting elbow adjust to the job.
• Quick latch system attaches to all conduit sizes with no loose parts.
• Right angle sheave keeps operator out of direct line of force.
• Dual diameter capstan provides two pulling speeds.
• Integral motor is specifically designed for cable pulling applications.
• Circuit breaker stops the puller motor if it becomes overloaded.
608
609
610
611
612
613
614
621
615
622
616
646
617
623
618
619
Conduit
Size
Conduit
Type
1/2"
3/4"
1"
1-1/4""
1-1/2"
2"
2-1/2"
2-1/2"
3"
3"
3-1/2"
3-1/2"
4"
4"
5"
6"
All
All
All
All
All
All
IMC, Rigid
EMT
IMC Rigid
EMC
IMC Rigid
EMC
IMC Rigid
EMC
All
All
OnSite
Supply
Ultra Tugger® 2 Specifications
Safety
Weight:
Drive Motor:
Pulling Speeds:
Pulling Force:
Use with:
Load Rating:
67 lb.
120 VAC, 50/60 Hz, 12 Amp.
High Speed Capstan: 1,000 lb load.
Low Speed Capstan: from 41 fpm @ No Load to 22 fpm @ 2,000 lb load.
High Speed Capstan: to 1000 lb. continuous.
Low Speed Capstan: to 2,000 lb. continuous.
Greenlee 640 & 6001 Cable Pullers.
6,500 lb.
Part No.
Description
UT2
24821
Ultra Tugger® 2 Cable Puller Unit.
Foot switch (optional)
Rentals
378
Hartford, CT
800-969-0285
NEFCO offers a
full line of Rental
Equipment
Call for Details
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
6501
Anchors
6800
4,000 lbs!
8,000 lbs!
High Pulling
Speeds:
No load: 26 fpm
2,000 lbs.: 20 fpm
Low Pulling
Speeds:
No load: 13 fpm
2,000 lbs.: 10 fpm
Max Pulling
Force:
High Speed: 2,000 lbs.
Low Speed: 4,000 lbs.
Continuous
Pulling Force:
Low Speed: 3,000 lbs.
Part No.
Description
9/16" diameter, dbl.
braided composite rope
6800
Ultra Tugger® 8 Cable
Puller Power Unit
Use with:
Part No.
UT4
10014
10015
35283
35283
35283
3048
2142
Description
Ultra Tugger® 4 Cable
Puller Unit.
Floor Mount
12' Boom Extension
9/16" x 300' Dbl. Braided
Composite Pulling Rope
9/16" x 600' Dbl. Braided
Composite Pulling Rope
9/16" x 1,200' Dbl.
Braided Composite Pulling
Rope
Storage Box
Storage Box (requires
boom to be removed from
puller)
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Threaded
Rod
Ultra Tugger® 5 Specifications
Weight:
Dimensions:
Drive Motor:
Power Source:
Pulling Force:
Pulling Speed:
84 lb. (Power Unit only)
Length: 11.5"
Width: 26"
Height: 6.75"
1½ hp.
120V 20A
Maximum: 5,000 lb.
Continuous: 4,000 lb.
No load – 14.5 fpm;
@ 4,000 lbs. – 11.0 fpm;
@ 5,000 lbs. – 9.5 fpm
Required Rope: 7⁄8" dia. Double-Braided
Polyester Composite;
Rated @ 32,000 lbs.
Part No.
15000
Boston , MA
800-645-6155
Pipe
Hangers
175 lb.
1-1/4 hp. 120 VAC, 60 Hz,
15 Amp.
Ultra Tugger® 4 Specifications
Tools
Weight:
Drive Motor:
86 lb. (Power Unit only)
Length: 11.5"
Width: 26"
Height: 8.5"
1½ hp.
120V 20A
Maximum: 8,000 lb.
Continuous: 6,500 lb.
No load – 9 fpm;
@ 2,000 lbs. – 8 fpm;
@ 4,000 lbs. – 7.5 fpm;
@ 6,000 lbs. – 6 fpm.
Required Rope: 7⁄8" dia. Double-Braided
Polyester Composite;
Rated @ 32,000 lbs.
6501
Hartford, CT
800-969-0285
Abrasives
Weight:
Dimensions:
Drive Motor:
Power Source:
Pulling Force:
Pulling Speed:
OnSite
Supply
Ultra Tugger® 8 Specifications
• 5,000 lb. pulling force, enough power to
pull most 500 kcmil (MCM) jobs of 500
ft. or less.
• Pull speed range of 9-14 fpm will complete most 500 ft. pulls in 1 hr. or less.
• Wheeled carriage and boom provides
fast setup with no anchors to set or
chains to mount.
• Boom uses 3" rigid steel conduit for easy
length adjustment to pull 10-20 ft. of
cable out of the box fast and easy.
• Greenlee 5,000 lb. and 8,000 lb. Ultra
Tugger® power units are interchangeable
in all Ultra Tugger® puller packages such
as 6503, 6505, 6802, or 6805.
• Use 6501 Ultra Tugger® 5,000 lb. capacity cable puller power unit with current
6805 Ultra Tugger® wheeled carriage
and boom to pull cable faster.
Description
Ultra Tugger® 5 Cable Puller
Power Unit (only) with standard force gauge.
Ultra Tugger® 5 Cabl
Puller Power Unit includes
standard force gauge, chai
mount & vise chains.
379
Safety
• 4,000 lb. Pulling Force
• Two Pulling Speeds
• Quick Latch System (no loose parts)
• Set-Up Versatility
• Easy Mobility
• Equipped with Pull Force Gauge and Foot
Switch
• Standard boom extension: 8', Optional
boom extension: 12'
• Dedicated Pulling Motor
• Designed with key safety features
Ultra Tugger® 5 Cable Puller
Power Unit - Rated 5,000 lbs
Rentals
All the features of the Ultra Tugger 2 plus
more!
• 8,000 lb. pulling force.
• Versi-Boom System allows versatile and
fast setups and pull 10' or 20' of extra
cable easily.
• Wheeled carriage and boom provides
fast setup with no anchors to set or
chains to mount.
• Boom uses 3" rigid steel conduit
• Greenlee 5,000 lb. and 8,000 lb. Ultra
Tugger® power units are interchangeable
in all Ultra Tugger® puller packages such
as 6503, 6505, 6802, or 6805.
• Lightweight, portable.
• Optional deluxe force gauge.
Strut
5,000 lbs!
Ultra Tugger® 8 Cable Puller
Power Unit - Rated 8,000 lbs.
Ultra Tugger® 4 Cable Puller Rated to 4,000 lbs.
Fasteners
Cable Pullers and Tuggers
Fasteners
Cable Pullers and Tuggers
11147
Anchors
6001
Strut
6,500 lbs!
Ultra Tugger® Adapter Package
Threaded
Rod
Super Tugger® Cable Puller - Rated 6,500 lbs.
• Pulls up to 6,500 lb. with less than 27 lb.
Pipe
Hangers
Tools
of operator effort.
• Unique floor mounting attachment for
quick, reliable setup.
• Leaf type mounting chains won’t twist
when tightening.
• Heat treated steel serrated gripper feet
for secure mounting to conduit.
• Force gauge included to constantly monitor the pull.
• Right angle sheave allows the operator
to stand out of the direct line of force.
• Audio alarm high force warning and circuit breaker shut off at maximum force
for added safety.
• Tapered capstan and patented roped
guidance system for better control of the
rope when feeding onto the capstan.
Part No.
Super Tugger® Specifications
Weight:
108 lb. (Power Unit
only)
Dimensions:
Length: 20¾"
Width: 22½"
Height: 12"
Drive Motor: 1½ hp.
Power Source: 120VAC
Pulling Force: Maximum: 6,500 lb.
Continuous: 4,500 lb.
Pulling Speed: No load – 16.5 fpm;
@ 2,000 lbs. – 11.0 fpm;
@ 4,000 lbs. – 7.5 fpm;
@ 6,000 lbs. – 6 fpm
Required Rope: ¾" dia. Double-Braided
Polyester Composite;
Rated @ 26,000 lbs.
• Adapt Greenlee 640 Tugger & 6001
Super Tugger® to Ultra Tugger® wheeled
carriage & boom for faster & easier
cable puller set-ups.
• Wheeled carriage & boom provides fast
setup with no anchors to set or chains to
mount.
• Boom uses 3" rigid steel conduit for easy
length adjustment to pull 10' of cable
out of the box fast & easy.
• Optional elbow unit and boom available
to reach into manholes or pull up to 20
feet of cable out of the box.
Ultra Tugger® Adapter Specifications
Weight:
Dimensions:
Use With:
Load Rating:
198 lb.
Length: 91½"
Width: 27"
Height: 38½"
Greenlee 640 & 6001
Cable Pullers.
6,500 lb.
Part No.
Description
11147
Description
Abrasives
6001
Super Tugger® cable puller power unit, includes force gauge and vise chains.
6001-22 Same as 6001 except 220 VAC 50Hz.
6004 & 6005 Packages
OnSite
Supply
Super Tugger® Puller Packages - Rated 6,500 lbs.
Super Tugger® Puller Packages
Safety
Part No.
Description
6004
Super Tugger® Complete Puller Package. Includes 6001 Super Tugger®, floor mount, mobile carriage, boom mount, 4' boom tube, nose
unit, 2½", 3", 3½" & 4" slip-in couplings, and storage trays.
Super Tugger® Complete Puller Package w/o Rope. Includes 6001
Super Tugger®, floor mount, mobile carriage, boom mount, 4' boom
tube, nose unit, 3' boom tube, elbow unit, 2½", 3", 3½" & 4" slip-in
couplings, and storage trays.
6005
00863
00835
00815
00827
00781
00783
3048
Ultra Tugger® 640/6001
adapter package. Includes
wheeled carriage; 4' boom,
boom adapter; nose unit;
2½", 3" & 4"
slip-in couplings; 2", 3" &
4" screw-on couplings.
Elbow Unit
3 ft. Boom
Slip-in Coupling - 3½"
Slip-in Coupling - 5"
Screw-in Coupling - 2½"
Screw-in Coupling - 3½"
Storage Box
Rentals
(Super Tugger® Puller Packages are available with 220 VAC 50 Hz Cable Puller units.
Please call for complete pricing and ordering information)
380
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Ultra Tugger Puller Packages
6503
UT-5 Puller Packages - Rated to 5,000 lbs.
UT-8 Puller Packages - Rated to 8,000 lbs
5,000 lbs!
Strut
These packages provide the most versatility to accommodate virtually any cable pulling
configuration that would be needed. Available with either Ultra Tugger® 5 or Ultra Tugger® 8
power units. The Versi-Boom system allows you to make versatile and fast setups and pull
10 ft. or 20 ft. of extra cable easily. The Versi-Boom also provides the capability to reach
below ground level, yet allow the operator to run the puller from above ground, thereby
avoiding potentially dangerous confined space issues.
Ultra Tugger® 5 Puller Packages • UT-5 •
Description
6503
Ultra Tugger® 5 Cable Puller Basic Package. Includes standard force
gauge; wheeled carriage; 4 ft. boom, boom mount & nose unit; 2½",
3" & 4" slip-in couplings; 2", 3", & 4" screw-on couplings. Rope & storage box optional.
Ultra Tugger® Cable Puller Deluxe Package. Same as 6503 plus 3 ft.
boom, elbow unit & floor mount. Rope & storage box are optional.
6505
Threaded
Rod
Part No.
6505
Fasteners
Ultra Tugger® 5 Puller Packages
®
Anchors
Cable Pullers and Tuggers
5,000 lbs!
Ultra Tugger® 8 Puller Packages • UT-8 •
Description
Pipe
Hangers
Part No.
Conduit or Pole Mount Package. Ultra Tugger® 8 Cable Puller with
Standard Force Gauge and Conduit Chain Mount.
6803
Basic Package without Rope. Ultra Tugger® 8 Cable Puller w/Standard
Force Gauge. Versi-Boom™ System. 2-1/2", 3" & 4" Slip-in and Screwon Couplers. Wheeled Carriage, Screw-on Couplers and Two Accessory
(Picture Not Shown) Trays.
6805A
Deluxe Package without Rope Same as 6803 plus Floor Mount and
Elbow Unit.
6805A-22
Same as 6805, except 220 VAC 50 Hz CE
Tools
6801
Model 6805A shown with
optional Storage Box and
Floor Mount.
6801
8,000 lbs!
Look for this logo on products
throughout this tool section
that are available for rent.
Refer to our Rental Section in
this catalog for more details.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
381
Safety
OnSite
Supply
8,000 lbs!
Rentals
6805A
Abrasives
Ultra Tugger® 8 Puller Packages • UT-8 •
Fasteners
Cable Pulling Packages / Accessories
UG512
Anchors
Ultra Glider™ Cable Lubricator
UGTAK
UGSAK
Strut
6810
Ultra Glider Specifications
Threaded
Rod
Weight:
Dimensions:
Power Supply:
Ultra Cable Feeder™
Pipe
Hangers
• Feeds cable at variable speeds to match
the speed of the cable puller.
• Accommodates cable ranging in size up
to 3½" in diameter
• Sets up easily and can be operated by
just one person.
• Dual motors drive each wheel for traction on both sides of the cable.
• Comes with pendant and toggle switch
or an optional foot switch to control
feeding.
Tools
Abrasives
Ultra Cable Feeder® Specifications
Weight:
285 lb.
Dimensions:
Length: 41"
Width: 27½"
Height: 37½"
Power Supply: 115VAC, 15 amps, 60 Hz
Speed:
4 – 36 fpm
Cable Capacity: 8 x 250 MCM
6 x 500 MCM
5 x 750 MCM
Reel Wt. Capacity: 25,000 lbs. total
Maximum
Tractive Force: Single Cable: 200 lbs.
All Cables: 800 lbs.
Tire Pressure: 22 psi
Part No.
6810
Description
OnSite
Supply
Ultra cable feeder with hand
switch
Optional foot switch
445
Hose Length:
Battery Life:
Part No.
UG512
UG512ST
UG512T
UG512S
UGSAK
UGTAK
14.5 lb.
Length: 39"
Width: 18"
Height: 17"
12V Sealed lead
rechargeable battery
10 ft.
3-4 5 gallon buckets peer
charge
• Applies lube more evenly around the
cable and more consistently than can
be done by hand. This reduces the force
required by the cable puller and reduces
the chance for damage to the cable.
• During a cable pull, the person feeding
the cable usually can operate the Ultra
Glider.
• Eliminates the need for a person to place
their hands near the point where the
cable enters the conduit or duct.
• Eliminates the mess and slippery
surfaces associated with manual cable
lubrication.
UGSAK Slip-In Applicator Kit
• Includes 2in, 2-1/2 in., 3 in., 3-1/2 in.,
and 4 in.applicators with case.
UGTAK Threaded Applicator Kit
• includes 2in, 2-1/2 in., 3 in., 3-1/2 in.,
and 4 in.applicators with case.
Description
UltraGlider 12V Assembly without Applicators
UltraGlider 12V including Slip-In Applicator Kit UGSAK and Threaded Applicator
Kit UGTAK
UltraGlider 12V including Threaded Applicator Kit UGTAK
UltraGlider 12V including Slip-In Applicator Kit UGSAK
Slip-In Appliactor Kit
Threaded Applicator Kit
Ultra Tugger® Speed Booster
• Increases the speed of the Ultra Tugger® to pull approximately 2X normal speed, up to 2,500 lb
• For use with the Greenlee Ultra Tugger® 5 & Ultra Tugger®
8 cable pullers only.
• Increases productivity on lower force runs and during the
initial phase of a high force pull.
• Automatically switches to low speed at 2,500 lbs to protect the puller motor.
• Ultra Tugger® adapter cord and plug included.
Ultra Tugger® Speed Booster Specifications
Capacity:
Dimensions:
Pulling Speed:
Ultra Tugger 5
Pulling Speed:
Ultra Tugger 8
Power:
Part No.
03561
0 to 2,500 lb. pulling force in high speed mode.
Height: 9½" x Width: 13" x Depth: 15½"
No load – 28.5 fpm;
@ 1,200 lbs – 25 fpm.
No load – 18 fpm;
@ 2,000 lbs. – 16 fpm;
115 VAC, 15A output; 115/230 VAC 15/6A Output
Description
Ultra Tugger® Speed Booster
Safety
Deluxe Force Gauge & Optional Strip Chart
• Measures tension on the rope, to an accuracy of ± 5%
• Use with pulling rope up to 7/8" diameter
maximum or with Kevlar® tape.
• Optional strip chart recorder for permanent record of pulling force.
Rentals
382
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
00967
33901
00966
86328
Description
Deluxe force gauge
Strip chart recorder
Cord patch
Paper for chart recorder
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
12"
24"
18"
Anchors
685
Fasteners
Cable Pulling Accessories
6085
• For use with any Greenlee cable puller.
• Strong, welded steel frames.
• Forged steel closure type hooks with 1" opening.
• All three sheaves are aluminum alloy with self lubricating bearings.
8024
24”
Part No.
50700
00838
50302
00843
50700
00846
50302
00844
50700
00850
50302
00845
Part No.
Description
685
Flexible adapter sheave for use with 640 Tugger®
cable puller. Max Cap. 4,000 lbs.
Flexible adapter sheave for use with 6001
Super Tugger® cable puller. Max. Cap. 6,500 lbs.
6085
Pipe
Hangers
Hook-Type Sheaves for
Easy Tugger™ & Tugger®
• 4,000 lb Rated
• Strong, welded steel frame.
• Forged steel closure type hooks with 1" opening.
• 5" wide aluminum alloy sheaves with self-lubricating
bearings.
• Select a sheave with a maximum rated capacity that
meets or exceeds the cable puller’s maximum
pulling force.
650
651
652
653
6" dia. hook sheave with 1½" minimum radius
12" dia. hook sheave with 35/16” minimum radius
18" dia. hook sheave with 7" minimum radius
24" dia. hook sheave with 913/16” minimum radius
Part No.
Description
459
Light Base Sheave
578
Set Screw Clamp Pulling Grips
• Use to pull in 2" or larger conduit
• Type of pulls: heavy and long runs
• Type of grip: Flexible eye ¼" diameter galvanized steel aircraft
cable connected to 2 cable receptacles with 5/8" diameter opening and 2 clamping set screws.
• Select pulling grips with a maximum rated capacity that meets
or exceeds the cable puller’s maximum pulling force.
Part No.
629
Description
Pulling grip with clevis includes 624S, 624L & 678
clevis - 4 clamp - max. rated capacity: 6,500 lb.
For forged eye grips
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
579
678
For flexible eye grips
For forged eye grips
Rope Clevis
• Removable sheave for rope eye.
• For use w/flexible forged eye grips & eye grips.
• Removable bolt & rope sheave & grip eye bolt.
• Select the clevis with a maximum rated clevis that meets or
exceeds the cable puller’s maximum pulling force.
Part No.
Each grip has two opposed set screws that provide
positive locking. Openings in wire grip should be
50% filled with wire to assure slip-proof grip.
Tools
Description
• Makes pulling wires for parking area lights easier.
• Mounts directly to existing square light pole bolt patterns.
• Slotted mounting holes fit a wide range of bolt
circle sizes.
• Tall enough to position sheave above most conduits.
• Rugged welded steel base structure.
Abrasives
Part No.
Light Base Sheave
OnSite
Supply
Roll Pin
Sheave Pin
Sheave Pin Clip
Sheave Unit
8018
18”
Part No.
• Use to attach to the conduit in conjunction with adapter sheave
for easier set-ups.
• Helps eliminate strains on hangers and boxes.
• Select a sheave with a maximum rated capacity that meets or
exceeds the cable puller’s maximum pulling force.
578
579
678
Boston , MA
800-645-6155
Description
Rope clevis
Rope clevis
Rope clevis
Hartford, CT
800-969-0285
383
Safety
8012
12”
Part No.
for Tugger™ & Super Tugger®
Rentals
Sheave
Diameter
Description
Strut
Flexible Adapter Sheaves
Threaded
Rod
Hook Sheaves
Fasteners
Cable Pulling Accessories / Rope
Double Braided Composite Rope for High Force Cable Pullers
Anchors
• Custom made to Greenlee specifications to provide 4:1 Safety Factor required for cable pulling.
• Double braided inner core with an extra double braided outer jacket for added strength and less
stretch - white with green tracer.
• Lowest stretch.
• Rot and mildew resistant.
• Factory spliced eyes at both ends.
Part No.
Strut
Threaded
Rod
Diameter
Length
For the 640 Puller
35283
9/16"
35284
9/16"
35285
9/16"
For the 6001 Puller
35098
3/4"
35100
3/4"
35101
3/4"
For the 6800 Puller
34136
7/8"
34137
7/8"
34138
7/8"
300’
600’
1,200’
300’
600’
1,200’
300’
600’
1,200’
Max. Rated
Capacity
4,000
4,000
4,000
6,500
6,500
6,500
8,000
8,000
8,000
lb
lb
lb
lb
lb
lb
lb
lb
lb
Avg. Breaking Rope
Strength
Weight
16,000
16,000
16,000
26,000
26,000
26,000
32,000
32,000
32,000
lb
lb
lb
lb
lb
lb
lb
lb
lb
Rope
Stand
28
63
130
644
644
†
58
113
230
644
654
†
90
178
359
654
654
†
† This rope does not fit on a rope stand. Use reel jacks and a spindle to dispense.
Multiplex Cable Pulling Rope for Low Force Cable Pullers
Pipe
Hangers
•
•
•
•
•
Strong, white polyester braided rope with green tracer.
Rot and mildew resistant.
Low stretch.
Packed on sturdy wooden reel.
Factory spliced eyes at both ends.
Part No.
Tools
Abrasives
Diameter
Length
For the 446 Puller
1/2"
480
481
1/2"
482
1/2"
For the 2001 Puller
483
5/8"
484
5/8"
485
5/8"
6005
5/8"
6015
5/8"
6025
5/8"
300’
600’
1,200’
300’
600’
1,200’
300’
600’
1,200’
Max. Rated
Capacity
1,200
1,200
1,200
2,000
2,000
2,000
2,000
2,000
2,000
lb
lb
lb
lb
lb
lb
lb
lb
lb
Avg. Breaking Rope
Strength
Weight
6,400 lb
6,400 lb
6,400 lb
10,000 lb
10,000 lb
10,000 lb
12,500 lb
12,500 lb
12,500 lb
Rope
Stand
21
50
104
406
644
†
34
75
142
58
113
230
644
644
†
644
654
†
† This rope does not fit on a rope stand. Use reel jacks and a spindle to dispense.
OnSite
Supply
Basket Wire
Junior Pulling Grip Set
Rope Stands
654
• Used to organize and rewind rope.
• Welded steel with washer and spring clip
to hold rope reel on the stand.
Safety
Part No.
405
Rentals
384
405
406
644
654
Spindle
Dia.
1.50"
0.62"
1.50"
1.90"
Hartford, CT
800-969-0285
Max Reel
Width
Dia.
10"
13"
17"
24"
6"
9"
16"
19"
• Pull in conduit or tray for medium duty pulls
• Single weave galvanized steel mesh with flexible pulling eye.
Cable Dia.Range
0.25"
0.37"
0.50"
0.62"
0.75"
1.00"
-
0.36"
0.49"
0.61"
0.74"
0.99"
1.24"
Max. Rated Cap.
Eye
Mesh
90 lbs.
180 lbs.
260 lbs.
390 lbs.
560 lbs.
780 lbs.
3¼"
3¼"
4¼"
5"
5¾"
6½"
4¼"
7"
8½"
10"
10"
11½"
Part No.
Description
30758
Building Wire Junior Grip Set, (6) Grips
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Cable-Gel™ Cable Pulling Lubricant
Winter-Gel™ Cable Pulling Lubricant
• Advanced formula, light yellow cream
makes pulling faster & easier.
• Compatible with all cable insulation types.
• Dries slowly to a thin, non-conductive,
non-hardening residue.
• Adheres to the cable without messy dripping.
• Environmentally safe/non-hazardous.
• Cleans up easily - non-staining.
• Won’t break down or separate after exposure to freezing cold or blistering heat.
• Polymer based lubricant offers lower
friction and easier pulling.
• Compatible with all cable insulation types.
• Cleans up quickly - non-staining.
• Will not cement itself to the pipe.
• Dries slowly.
• Can be applied by hand or pump.
• Higher lubricity than competitive products.
• Won't breakdown or separate after
exposure to heat or cold.
• Will not freeze until -25°F (3.9°C).
• Can be used all year long.
• Reduces friction for easy pulling.
• Cleans up quickly and easily.
• High lubricity.
• Environmentally safe.
• Safe with all cable insulation types.
Part No.
Part No.
Description
GEL-Q
Cable-Gel™ 1 quart
Squeeze Bottle
Cable-Gel™ 1 gallon
Cable-Gel™ 5 gallon
Cable-Gel™ 55 gallon
Duct
Size
Disk
Size
Part No.
2
2.5
3
3.5
1.75
2.25
2.75
3.25
• Wide welded steel base for added stability.
• Roller bearings fit in the spindle groove to
keep the spindle in place and turning freely.
• Two stands and a spindle are required for a
complete set-up.
683
687
684
647
25591
38619
Lube Spreader Swab
4
5
6
3.75
4.75
5.75
• Tapered shape permits bidirectional use.
• Will not damage inner walls of duct.
• Spreads a coat of wire lubricant in duct before cable installation.
• Cleans mud, dirt and light debris from duct before pulling.
• Max. rated capacity: 4800 lbs.
683
Fasteners
Ratchet Type Reel Stands
Description
Reel Stand 22” - 54”
Reel Stand 13” - 28”
Spindle for 683 Reel Stand
Spindle for 687 Reel Stand
Stop Pin (683 - 2; 687 - 1)
Jackscrew Repl. Unit for 68
or 687
Philadelphia, PA
610-647-8070
Tools
Disk
Size
16859
17370
17371
Screw Type Reel Stands
Part No.
Duct
Size
Washington D.C.
877-419-2755
Abrasives
16854
16856
16857
16858
GEL-1
GEL-5
GEL-55
OnSite
Supply
Part No.
Cable-Cream™ 1 quart
Squeeze Bottle
Cable-Cream™ 1 gallon
Cable-Cream™ 5 gallon
Cable-Cream™ 55 gallon
Winter-Gel™ 1 Gallon
Winter-Gel™ 5 Gallons
656
• Easily raises or lowers the height.
• Two stands and a spindle are required for a
complete set-up.
• Roller bearings fit in the spindle groove to
keep the spindle in place and turning freely.
Part No.
656
657
38697
687
Boston , MA
800-645-6155
Description
Safety
CRM-1
CRM-5
CRM-55
Description
Description
WGEL-1
WGEL-5
Ratchet Reel Stand 28” - 455/8”
Spindle for 656 Reel Stand
Jackscrew Replacement Unit
Hartford, CT
800-969-0285
385
Rentals
CRM-Q
Part No.
Pipe
Hangers
Cable-Cream™ Cable Pulling Lubricant
Threaded
Rod
Strut
Anchors
Cable Pulling Accessories / Lubricants
Fasteners
Reel Stands / Wire Carts
#75
Anchors
#65
Econo Mac Reel Stands
Strut
Threaded
Rod
• Capacity to 2,500 lbs.
• Self-lubricating bearings – no grease
required.
• One-bolt disassembly - no welding required for service.
• Double-pronged pins.
• Two stands and a spindle are required
for a complete set-up.
Part No.
780934
780935
Hand Caddy
909
6-Spindle Wire Caddy
Description
Econo Mac #65 15½” - 27”
Econo Mac #75 23¾” - 52¾”
Pipe
Hangers
Reel Stand Spindles
• All welded steel construction with 6 reeel
spindles and feeding eye.
• Includes 2 fixed & 1 locking swivel
wheels allowing easy movement & control.
• Spool rack consists of 10 spindles and
an adjustable guide loop & can be
turned 360° independent of the base.
• Spindles are angled to contain reels &
act as a brake while paying out wire.
• Fits through 30" door openings.
• 39" L x 30" W x 31" H. Wt. 93 lbs.
Part No.
Description
909
6-Spindle Wire Caddy
• Holds (4) 500' spools 0f #10 AWG (7"
dia. x 6"-10" wide)
• Holds up to (8) 500' spools 0f #12 AWG
(7" dia. x 5" wide)
• 3/8" diameter solid steel spool support
spindles.
• Spool retaining washers on spindles.
• Pinless design eliminates loose parts.
• 21"L x 10½" W x 13½" H. Wt. 4 lbs.
Part No.
Description
9502
Hand Caddy
Tools
• Tempered steel with grooves to fit reel stand
rollers.
Part No.
647
Description
Abrasives
Spindle for 687 Reel Stand
5,000 lb. capacity. 62" L.
Spindle for 656 Reel Stand
7,500 lb. capacity. 100" L
Spindle for 683 Reel Stand
5,000 lb. capacity 76" L
657
684
914
OnSite
Supply
Wire Dispenser
9520
• Width is ideal for large diameter spools of
coax, data and communications cable.
• 21" L x 28½" W x 11½" H. Folds down for
easy storage
• Consists of (1) frame with (2) wheels. 2
or more frames and a spindle of 1" ridgid
conduit are required to create a reel support
setup.
• Easy setup takes only seconds to create.
• Swivel locking casters incl;uded on each
frame.
• 17½" W x 14" H. Wt. 8.4 lbs.
• All welded steel construction.
• Includes 2 fixed and 2 locking swivel
heavy-duty casters.
• Spool rack consists of 10 spindles and
an adjustable guide loop & can be
turned 360° independent of the base.
• Spindles are angled to contain reels &
act as a brake while paying out wire.
• Fits through 36" door openings.
• 36¼" L x 31½" W x 59" H. Wt. 213 lbs.
Part No.
Part No.
Description
Part No.
Description
914
Wire Reel Support Frame
910
Wire Dispenser
Wire Reel Support Frame
Data Cable Caddy
Safety
Rentals
9520
386
Description
Data Cable Caddy
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Wire Carts
Strut
Anchors
783444
6
6
8"
16"
500'
2,500'
Dim: 55¾" H x 27" W x 27"L
Wt: 67 lbs.
Part No.
Description
783411
Caddy Mac #4
783411
Spool Maximum Spool Size
Qty
Diameter Width
1
2
3
8
10
15
24"
18"
14"
10"
7"
7"
Width
Reel Capacity
Diameter Weight
25"
350 lbs.
Part No.
916
Description
Wire Dispenser
Dim: 31½" W x 16" D x 63½"L
Wt: 80 lbs.
Part No.
783444
Spool Mac
911
Max. Platform Load: 250 lb.
Dim: 47¼" H x 26½" W x 21½"L
Wt: 67 lbs.
Part No.
Description
783400
Caddy Mac #3
Wire Cart
BX-Cable Dispenser
• Dispenses BX, armoured
cable, flexible conduit,
Greenfield or NM-B cable
fast and easy without twists
or tangles.
• Base with adjustable tension
control rotates to dispense
cable without overpulling.
• Large pulling eye rotates
freely and can be used as a
carrying handle when dispenser is empty.
• 13½" H x 26" dia. Wt. 31 lbs.
Part No.
37218
Washington D.C.
877-419-2755
Threaded
Rod
Description
17¾"
17¾"
17¾"
8½"
8½"
5¾"
783400
Philadelphia, PA
610-647-8070
40"
Tools
Spool Maximum Spool Size
Diameter Length
Qty
• Uses 5 spindles with 5/8"
diameter.
• Unique spindle locking system, no loose clips.
• Storage loops retain up to 5
spindles.
• 7 mounting positions.
• Dual wire guides.
• Large spool capacity.
Abrasives
• Large capacity wire cart.
• Easy loading of wire spools.
• Patented spindle locking
system, no loose clips.
• Convenient storage loops
contain up to 5 spindles.
• Solid frame construction.
• Large 10" wheels.
• Dual wire guides.
Caddy Mac #3 Wire Cart
Boston , MA
800-645-6155
Description
BX-Cable Dispenser
• Large capacity.
• 5 reel axles with spring clip
retainers and 2 positions for
axle storage allows configuration for large reels with no
loose parts.
• Tubular steel welded frame w/
8" heavy-duty wheels.
• Built-in wire guide for horizontal
dispensing.
• Will pass through 28" wide
opening.
• 54½" L x 27" W x 26½" H.
Wt. 62 lbs. Maximum spool
weight: 550 lbs.
Part No.
911
Hartford, CT
800-969-0285
OnSite
Supply
Caddy Mac #4 Wire Cart
• All steel welded frame w/heavyduty wheels.
• Unique design provides easy
setup for cable payout.
• Handle folds to save space
when using as a dispenser.
• 63" L x 297/8" W x 26¾" H.
Wt. 110 lbs. Maximum reel
weight: 300 lbs.
Safety
783400
Description
Wire Cart
387
Rentals
783411
Cable Reel Transporter
Pipe
Hangers
Spool Mac
• All steel frame construction.
• 10" Wheels.
• Easy set-up for cable dispensing.
• No loose pieces.
• Compact storage.
• Fits through 32" doorways.
• 350 lb lifting capacity.
Fasteners
Conduit & Pipe Racks / Carts
Anchors
Strut
668
783317
783299
Threaded
Rod
MackRack I
Mobile Storage Cart
MackRack II
Mobile Storage Cart
Pipe
Hangers
• 1000 lb. storage capacity.
• Double wall square tubing.
• Eight bins of storage.
• Stack similiar carts together or with
other Stacking Mac Rack products.
Conduit & Pipe Storage Rack
• 7 individual bins allow sorting by size
and type.
• Folds down for storage.
• Casters included.
• Mac Rack II has a convenient utility tray.
• Arms fold easily with plunger release.
• Shipped assembled with 6" heavy duty
casters.
• Powder coat finish.
Specifications
Specifications
Tools
Capacity:
Weight:
1000 lbs.
165 lbs. (MacRack I)
172 lbs. (MacRack II)
Dimensions:
63½" H x 58½" L x 34" W
Folded Down: 19" H x 58½" L x 34" W
Ground Clearance: 7.5"
Capacity:
Dimensions:
Folded Down:
Weight:
1000 lbs.
63½" H x 58½" L x 34" W
19" H x 58½" L x 34" W
113 lbs.
Part No.
Description
Part No.
Part No.
Description
783317
MacRack I Cart
783299
Description
MacRack II Cart
668
503
603
Bundle Mac
Abrasives
• Holds large bundles of conduit.
• Arms fold in seconds for convenient storage.
• 1,000 lb. load capacity.
• Stacks with all Mac carts.
Specifications
OnSite
Supply
Capacity:
Dimensions:
Weight:
1000 lbs.
42½" H x 58½" L x 33" W
165 lbs.
Part No.
Description
783320
BundleMac Cart
Bundle Mac
783320
Cricket
782699
Cricket Pipe Cart
Safety
• Transport 20' pipe lengths up to 1,000 lbs.
• Lightweight (70 lbs.).
• Quick handle disconnect for convenient storage.
• Carries up to 12" diameter pipe.
Part No.
782699
Rentals
388
Description
• Easy, single
person operation saves time
and money.
• Move standard
20' lengths of
pipe.
• Large 4.80" x
8" pneumatic
tires.
• Heavy-duty
steel construction for long
service life.
36745
Capacity:
20" diameter, 1000 lbs.
Part No.
Description
36745
Hartford, CT
800-969-0285
Pipe Cart
Specifications
Cricket Pipe Cart
Mobile Conduit & Pipe Rack
Repl. 6" Caster Set, 4 - Swivel
Repl. 6" Caster Set, 2-Ridgid,
2-Swivel
Boston , MA
800-645-6155
Pipe Cart
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part No.
Description
Wire Stripper
908
Wiring Tool
Long Nose, All-Purpose Tool
Wire Stripper/Cutter
Wire Stripper/Cutter
• Strips six standard wire sizes (10 - 20 AWG
solid 7 stranded) without nicking wire.
• Scissors action of ½" (13 mm) wide cutter
makes clean cuts with little effort.
• Serrated nose jaws to bend, shape, or
pull wire; holes for looping wire ends.
• Spring-loaded for self-opening action.
• Comfortable, plastic-covered handles.
Part No.
1011
• A handy, light, compact tool for stripping
insulation.
• Convenient hole for looping or bending
wire.
• Black-oxide finish with plastic-dipped
handles.
• Cuts, strips, and loops 12-26 AWG solid
and stranded wire.
• Adjustable slide stop with set screw for
repeat stripping work.
Part No.
1004
Description
• Easily cuts and strips wire.
• Narrow, serrated plier nose to pull, loop
and bend wire.
• Long, curved cutting blade.
• Cutters and strippers are in front of the
pivot for maximum ease-of-use in reaching into tight places.
• Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals.
• Cleanly shears bolts.
• Plastic-covered cushioned handles for
comfort.
Part No.
Wire Stripper/Cutter
1010
Long Nose, All-Purpose Tool
Description
Multi-Purpose Tool
10-22 AWG Solid
• Cleanly shears bolts.
• Easily cuts and strips wire.
• Measures stud sizes.
• Gauges wire sizes.
• Crimps insulated terminals.
• Plastic-covered cushioned handles for
comfort.
• Two wire cutters—one at tip, the other
halfway back near stripping holes
• Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices.
• Cuts and strips 8-22 AWG solid and 1026 AWG stranded wire.
• Cleanly shears bolts.
• Pivot nut adjusts tension.
• Left- & right-hand wire-looping holes.
• Full-sized, plastic-covered cushioned
handles for comfort.
• Crimping dies color-coded
• Crimps insulated and non-insulated
terminals, lugs, and splices.
• Crimps 7 mm ignition and distributor
terminals.
• Easily cuts and strips wire.
• Cleanly shears bolts.
• Wire cutter in nose.
• Plastic-covered cushioned handles for
comfort.
Part No.
Part No.
1002
Multi-Purpose 6-N-1 Tool
1000
Description
Multi-Purpose 6-N-1 Tool
Philadelphia, PA
610-647-8070
1001
Washington D.C.
877-419-2755
Description
Part No.
Multi-Purpose 6-N-1 Tool
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Fasteners
Description
Wire Stripper/Cutter
Multi-Purpose Electrician’s Tool
Anchors
Threaded
Rod
Description
958
Pipe
Hangers
11046
11047
Part No.
Tools
Description
Wire Stripper - Yellow
Handle, Strips AWG 10, 12,
14, 16, 18 ga. solid wire.
Wire Stripper - Red Handle,
Strips AWG 16, 18, 20, 22
24, 26 ga. stranded wire.
Wire Stripper - Yellow
Handle, Strips AWG 22, 24,
26, 28, 30, ga. solid wire.
Abrasives
Part No.
11045
OnSite
Supply
• Compact, lightweight wire-stripping &
cutting tool.
• Narrow nose fits into tight places.
• Spring-loaded, self-opening.
• Precision-ground stripping holes.
• Clear gauge markings on both sides.
• Black-oxide finish
• Textured handles provide a firm, comfortable grip.
• Strips AWG wire sizes: 10, 12, 14, 16,
18, 20 and 22. Strips mm wire sizes:
.80, 1.0, 1.3, 1.6, 2.0, 2.6.
• Precision holes for wire stripping. Cuts
machine bolts withou damaging threads:
sizes: X4-40, 5-40, 6-32, 8-32, 10-32 and
10-24.
• Crimps both insulated and non-insulated
connections
• Scissor-type blades are precision ground
and heat treated to hold their edge.
• CHANNELLOCK BLUE® comfort grips.
Safety
Wire Stripper/Cutter
Wiring Tool
Description
Multi-Purpose Tool 10-22
AWG Solid
389
Rentals
Wire Stripper-Cutter
• Designed to cut copper wire only
• Strips AWG wire sizes: 10, 12, 14, 16,
18, 20 and 22.
Strips mm wire sizes: .80, 1.0, 1.3, 1.6,
2.0, 2.6.
• Precision holes for wire stripping
• Lean plier nose pulls and loops wire.
• Scissor-type blades are precision ground
and heat treated to hold their edge.
• Highly visible AWG and mm wire guage
sizes painted and embossed in the metal.
• CHANNELLOCK BLUE® comfort grips.
Strut
Wire Stripping Tools
Fasteners
Wire Cutting Hand Tools
Anchors
Diagonal-Cutting Pliers
Side Cutting Pliers
Strut
Klein diagonal-cutting pliers come in two styles;
Standard duty, a premium quality design and
rugged, precision construction; and the innovative
Klein “2000 SERIES" with super-tough cutting
knives, specially designed and heat-treated to cut bolts, nails, ACSR, and most hardened
wire without damage. All “2000 SERIES" have combination polished and black-oxide
finish.
High-Leverage Diagonal Cutters
Threaded
Rod
High-leverage design provides a 36%
greater mechanical cutting and gripping
advantage than regular diagonal cutters.
Standard-bevel cutting knives. Plasticdipped handles - hand form style No.
D228-8.
Part No. A
B
D228-8
13/16 1-3/16 7/16
8
C
D
Klein 2000 Series
Pipe
Hangers
D2000-928 Same as D228-8 except with
ultra durable “2000 Series"
cutting knives for ACSR, bolts,
nails and most hardened wire.
Blue plastic-dipped handles.
High-Leverage Diagonal Cutters
with Angled Head
Tools
High-leverage, heavy-duty with head
angled for easier work in confined areas.
Standard-bevel cutting knives. Plasticdipped handles.
Part No. A
D248-8
8
B
C
D
1-3/16 1-3/16 7/16
High-Leverage Diagonal Cutters
with Skinning Holes
Abrasives
High-leverage, heavy-duty with two skinning holes for 12 and 14 gauge wire.
Standard-bevel cutting knives. Plasticdipped handles.
Part No. A
B
C
D
D243-8 8
13/16 1-3/16 7/16
Tapered Nose and standard-bevel cutting knives. Available with or without coil
spring. Plastic-dipped handles.
Part No. A
B
OnSite
Supply
Tapered nose and standard-bevel cutting
knives. One-inch jaws reach into confined
spaces. Plastic-dipped handles.
Part No.
A
B
Safety
D220-7 7-11/16 1
C
D
31/32 1/2
C
D
High-Leverage NE-Type
Side Cutters
D202-5 5-1/2 13/16 11/16 7/16
Midget Pointed Nose Diagonal
Cutters with Extra Narrow Jaw
Full flush-cutting diagonal cutters with fine,
narrow jaw taper and narrow hinge for especially delicate work. Fully polished head
and neck. With coil spring. Plastic-dipped
handles.
Part No. A
B
D259-4C 4-3/16 1/2
C
D
1-3/32 1/4
These inexpensive pliers
shear wire up to No. 14
AWG with unique flush-cutting action that minimizes
fly-off. Design greatly reduces cutting effort. Compact
head is easy to manipulate
in tight areas. Comfortable
plastic covered handles.
Lightweight yet rugged
construction. Steel hold-open spring.
D275-5
Length
Our most popular side cutting pliers.
Smooth, streamlined nose with knurled
jaws. High-leverage design provides 46%
greater cutting and gripping power than
regular 8-1/2" and 9-1/4" side cutters. Blue
plastic-dipped handles.
Part No. A
B
C
D
E
D213-9NE 9-1/4 1-19/32 1-5/16 5/8 25/32
Klein 2000 Series
D2000-9NE Same as D213-9NE except with ultra
durable “2000 Series" cutting knives for
ACSR, bolts, nails and most hardened
wire. Blue plastic-dipped handles.
Midget
Light-Weight
Diagonal Cutters
Part No.
Heavy-Duty Diagonal Cutters
With Tapered Nose
Klein side-cutting pliers come in two styles.
Standard duty and the innovative Klein
“2000 Series" with super-tough cutting
knives, specially designed and heattreated to cut bolts, nails, ACSR, and most
hardened wire without damage. All “2000
SERIES" have combination polished and
black-oxide finish.
Standard Diagonal Cutters with
Tapered Nose
5"
Standard NE-Type Side Cutters
Smooth, streamlined design. Slides more
easily in and out of tool pouch. Plasticdipped handles.
Part No. A
A - Overall Length
D - Jaw Thickness
B - Jaw Length
E - Knife Length
C - Jaw Width
F - Point Thickness
C
D
E
D201-9NE 9-1/4 1-19/32 1-5/16 5/8 25/32
High-Leverage NE-Type Side
Cutters with Crimping Die
Same high-leverage design and mechanical
cutting advantage as D213-9NE pliers, but
with crimping die at the hinge for crimping
sleeve connectors. Plastic-dipped handles.
Part No.
Key to Dimensions for Pliers
B
Description
D213-9NE-CR Same as D213-9NE w/
crimping die
Klein 2000 Series
D2000-9NE-CR Same as D2000-9NE w/
crimping die
Rentals
All dimensions are in inches and (millimeters).
WARNING: Plastic-dipped or slip-on plastic
handles are NOT intended for protection
against electrical shock.
Dimensions for pliers shown are accurate within accepted commercial tolerances, which
allow slight variations that normally result from forging and grinding operations.
WARNING: Never use any pliers or cutters on live electrical circuits.
390
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Economically priced, lightweight, yet efficient shear-type cable cutters. # 63041
cuts soft cable up to 1-3/8" diameter. #
63045 cuts soft cable up to 1-3/4". Hook
jaw shape forces cable into jaws. Heavyduty pins in head serve as blade-stops.
Jaws are of drop-forged alloy tool steel
and are replaceable if damage or worn
out. Beveled tips assure positive mating,
and hinge on a rugged bolt with a pinset
nut to maintain proper blade tension. Not
designed for cutting steel or ACSR.
MCM
Part Cable Cutting Overall
No. Capacity
Length
63041 500 Cooper,
25-1/2"
750 Aluminum
63045 1000 Cooper, 32"
1200 Aluminum
Approx
Weight
4-1/2 lb
6 lb
Replacement Cable Cutter Heads
Part No.
Fits Klein Part No.
63081
63090
63041
63045
Replacement Blades. Chrome-finished
steel tapping blades for No. 625-24 and
625-32 Triple-Tap Tools above.
Part No.
Long Nose / Special Purpose Pliers
Description
Standard Long-Nose
626-24 Repl. Blade for No. 625-24
626-32 Repl. Blade for No. 625-32
Cushion-Grip Scratch Awl
The basic Klein long-nose pliers. Available
with or without coil spring. Knurled jaws,
yellow plastic-dipped handles.
Professional, heavy-duty, hard-pointed awl
scribes metal, starts screw holes, performs a variety of piercing and punching
jobs. Rigid, chrome-plated, heat-treated,
tempered-steel shank has full reinforcing bolster at handle for extra strength.
Flanged shank is anchored deep in fullsized amber plastic handle with CushionGrip for maximum comfort.
Part No. A
Part No.
Blade Length
Overall Length
66385
3-1/2"
7"
Philadelphia, PA
610-647-8070
D
Heavier design long-nose pliers for easier, more
comfortable cutting. Plastic-dipped handles.
Part No. A
B
C
D
F
Overall Length
D203-8 8-5/16 2-5/16 1
650
7"
HD Long-Nose w/ Side Cutters,
Skinning Hole & Crimping Die
3-1/2"
Part No.
Overall Length
627-20
7-1/2"
Replacement Taps: For No. 627-20.
Part No.
Tap Size
627-32
628-20
10-32, 8-32, 6-32
1/4-20, 12-24, 10-24
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
1/2 5/8 1/8
With skinning hole for No. 12 AWG insulated
wire and crimping die for connectors, lugs and
terminals. Comfortable plastic-dipped handles.
Quickly forms new threads, re-forms
burred threads, and cleans out plaster
obstructions. Each tap size re-threads to
next larger size if threads are stripped.
Two high-carbon steel taps are secured in
reversible holder. Holder fits into large,
clear plastic handle. To change taps, simply reverse holder in handle.
Fasteners
F
HD Long-Nose with Side Cutters
Part No. A
One-piece forged-steel blade and husky
handle for optimum strength. Heat-treated
for maximum life. Black finish.
C
D301-6 6-5/8 1-15/16 11/16 3/8 3/32
D301-7 7-1/8 2-7/16 11/16 3/8 3/32
Part No. Blade Length
Six-in-One Tapping Tool
All-Steel Scratch Awl
B
Strut
D248-8-INS
Nominal 8" length insulated
angled-head diagonal
cutters
D2000-48-INS Same as D248-8-INS but
w/ “2000 Series" cutting
knives for ACSR, bolts,
nails & most hardened wire.
Threaded
Rod
Standard Cable Cutters
6-32, 8-32 & 10-24
6-32, 8-32 & 10-24
Length
Pipe
Hangers
9-1/2"
625-24 Blue
625-32 Orange
Part No.
B
C
D203-8NCR 8-5/8 2-5/16 1
D
1/2
F
5/8 1/8
Conduit Locknut and
Reaming Pliers
Tightens conduit locknuts, fittings and caps. Reams both the
inside and outside of conduit.
The special long-nose jaw design makes tightening locknuts
faster and easier on electrical
outlet boxes and in hard-toreach areas where conduit
fittings are used.
Part No.
Overall Length Jaw Length
D333-8
7-3/4”
Hartford, CT
800-969-0285
1-5/8”
Tools
Length
Part No. Color Code Taps Screw Holes
High-leverage, heavy-duty design with angled
head for easier work in confined areas.
OnSite
Supply
Part No.
63050
For cleaning and chasing burred threads.
Replaceable, chrome-finished 3" (76 mm)
steel blade threaded to tap three hole
sizes. Available in two tapping size combinations. Clear plastic handle, colour coded
for identification.
Safety
'e-cutting jobs with ease. Special highleverage design gives it amazing cutting
capability for its size. Cable-gripping
shear-type jaws cut up to 4/0 aluminum
(not ASCR) -pair, 24-ga. communication
cable. Makes clean, efficient cuts. Compact. Ideal for working in confined spaces.
Tough, comfortable, red plastic-dipped
handles. Not designed for cutting steel or
ACSR.
Abrasives
Tapping Tools Triple-Tap Tool
Insulated High-Leverage
Diagonal Cutters
w/ Angled Head
391
Rentals
High-Leverage Cable Cutter
Anchors
Electrical Hand Tools
Fasteners
Cutting Tools
Anchors
ROCUT® Professional
Plastic Pipe Shears
Cable Cutter
42TC
52000
Strut
• Easily cuts copper and aluminum cables
up to 2/0.
• Plastic coated, high-leverage handles
• Heat-treated, heavy-duty forged steel.
• Steel handles with rubber grips.
• Made in the USA.
42TC (for up to 1-5/8")
Threaded
Rod
• For precise cutting of PVC, PP, PE, PEX,
PB, and PVDF pipes up to 1-5/8" dia
• Rubber handle. Lockable lever.
• Wide pipe support: precise, right-angled cut.
• Stainless steel double-sided blade with
V-edge.
Part No.
52000
Part No.
727
Description
Cable Cutter
Pipe
Hangers
Flex Splitter®
50TC (for up to 2")
BX & Flexible Conduit Cutter
• Plastic pipe shears for precise cutting of
PVC, PP, PE, PEX, PB, and PVDF pipes
up to 2" diameter
Tools
Description
PVC Cutter for up to 2"
75TC
52015
• Cut flexible metal conduit in seconds..
• Ample clearance between handle and body.
• Set conduit size for multiple cuts of the
same size conduit.
• No need to reset.
• Set blade adjustment with only a screwdriver.
• Convenient in-handle blade storage holds up to five spare blades.
Part No.
1940
Description
Abrasives
Flex Splitter Flexible Metal
Conduit Cutter
Single Blade replacement
Replacement Blades - 5 pack
®
1941-1
1941-5
75TC (for up to 3")
OnSite
Supply
52015
• High-leverage design.
• Precision, one-hand shearing action.
• Cable-gripping shear-type jaws.
• Perfect for working in confined spaces.
• Beveled jaw tips provide proper mating and
shearing action.
• Maximum cable cutting capacity: 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG
communications wire.
Part No.
63050
Description
Cable Cutter
Crimping/Cutting Tool
• Accommodates wire from #10 to #22 AWG.
• Specially hardened wire cutter in nose.
• Tapered nose design.
• Crimping die marked for insulated and
non-insulated solderless terminals and
connectors.
• Plastic-dipped, cushioned handles.
1005
Description
Crimping/Cutting Tool
Description
PVC Cutter for up to 2"
NM Cable Ripper
Cable Splicer’s Knife
Safety
• Special-purpose short blade (1¾") with comfortable, full-sized (4½"), heavy-duty handle.
• Textured handle for comfort & firm grip.
Part No.
44200
Description
• An easy-to-use cable ripper.
• Slits the outer jacket of Romex® cable
(all sizes) and other nonmetallic (type
NM) sheathed cable.
• Measures conductor wire guage from 6
to 14 AWG.
Part No.
Cable Splicer’s Knife
74018
Description
NM Cable Ripper
Crimping/Cutting Tool -
Non-Insulated Terminals
• Accommodates wire from #10 to #22 AWG.
• Designed for crimping non-insulated
solderless terminals and connectors.
• Specially hardened wire cutter in nose.
• Tapered nose.
• Plastic-dipped cushioned handles.
Part No.
Rentals
1006
392
Description
Journeyman™ Cable Cutter
Part No.
• Plastic pipe shears for precise cutting of
PVC, PP, PE, PEX, PB, and PVDF pipes
up to 3" diameter.
Part No.
Part No.
J63050
Cable Cutter
50TC
52010
52010
• Cuts up to 4/0 aluminum AWG (no ACSR),
2/0 AWG soft copper and 100-pair 24 AWG
communications cable.
• High-leverage for greater cutting power.
• Precision, one-hand shearing action.
• Soft, red handle material on outer surface.
Description
PVC Cutter for up to 1-5/8"
Part No.
Journeyman™ Cable Cutter
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
Crimping/Cutting Tool
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
706
704
Heavy-Duty Ratchet Cable
Cutter
Max. Use
Freq. Use
Length
Weight
Ratchet ACSR/Cable Cutter
• Extra thick blades, ground flat to reduce
potential for breakage.
• Ratchet action for increased cutting power.
• Two cutting actions - fast scissor cutting
for small cable; converts automatically to
ratchet mode.
• Anti-slip mechanism for positive ratchet
action.
• Rubber boot protects ratchet mechanism.
• Capacity: 954 MCM ACSR, ½" soft steel
rod; Length - 29¼"; Weight - 12.22 lb.
Part No.
757
500 MCM
350 MCM
Max. Use
Freq. Use
Length
Weight
Part No.
704
705
706
500 MCM
350 MCM
25½"
5.5 lbs.
750 MCM
500 MCM
31½"
6.2 lbs.
• Lightweight, efficient, shear-type cable
cutters.
• Replaceable hook-jaw blades grab and
hold cable while shear-cutting action
makes clean cuts.
• Exceptionally strong fiberglass handles
with heavy vinyl grips for comfort and
slip resistance.
• Heavy-duty pins in head serve as blade-stops.
• Jaws are forged tool steel with black-oxide
finish for long life.
• Beveled tips assure positive mating,
hinged on a rugged bolt with a pin-set
nut to maintain proper blade tension.
• Make a clean, even cut for ease in fitting
lugs and terminals.
• Not designed for cutting steel or ACSR.
Description
21" HD Cable Cutter
25½" HD Cable Cutter
31½" HD Cable Cutter
Part No.
Description
EHS Guy Wire Cutter
Boston , MA
800-645-6155
Strut
18" HD Cable Cutter
Standard Cable Cutters
1000 MCM
750 MCM
EHS Guy Wire Cutter
Washington D.C.
877-419-2755
–
350 MCM
1000 MCM
750 MCM
• Cuts ½" Extra High Strength (EHS) and
standard guy wire.
• Cuts ½" mild steel rods and bolts.
• Has two cutting actions - single motion
cutting for small cable. Ratchet action for
heavy-duty cutting.
• Anti-slip mechanism for positive ratchet
action.
• Length - 27¾"; Weight - 10 lb 12 oz.
Philadelphia, PA
610-647-8070
Description
718
Description
758
Part No.
Aluminum
706 Specifications
Copper
Aluminum
Ratchet ACSR/Cable Cutter
350 MCM
4/0
18"
2.78 lbs.
705 Specifications
Copper
Aluminum
Max. Use
Freq. Use
Length
Weight
350 MCM
250 MCM
21"
3.01 lbs.
Max. Use
Freq. Use
Length
Weight
Threaded
Rod
Specifications
Copper
Pipe
Hangers
756
Description
704 Specifications
Copper
Aluminum
Part No.
63041
63045
63081
63090
Hartford, CT
800-969-0285
Description
25" Cable Cutter, Maximum
cable cutting capacity: 500
MCM Copper, 750 MCM
Aluminum
32" Cable Cutter, Maximum
cable cutting capacity: 1000
MCM Copper, 1200 MCM
Aluminum
Repl. Cutter Head for 63041
Repl. Cutter Head for 63045
393
Tools
Part No.
1500 MCM
1000 MCM
• Strong, lightweight fiberglass handles.
• Adjustable pivot bolt for blade adjustment.
• Replaceable, forged, heat-treated and
precision ground blades.
• Made in the USA.
Abrasives
Max. Use
1500 MCM
Freq. Use
1000 MCM
Length
27½"
Jaw Opening:
2"
Weight
11.41 lbs.
Aluminum
Heavy-Duty Cable Cutters
OnSite
Supply
Economy Cable Cutter
• Economical, lightweight, fits easily into
toolboxes.
• Adjustable pivot bolt provides for blade
adjustment.
• Heat-treated, precision ground blades.
• Steel handles with rubber grips.
• Made in the USA.
Safety
Specifications
Copper
705
Rentals
Heavy-Duty Ratchet Cable Cutter
• Extra thick blades, ground flat to reduce
potential for breakage.
• Ratchet action for heavy-duty cutting.
• Two cutting actions - fast scissor cutting
for small cable and insulation; converts
automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet
action.
• Rubber boot protects ratchet mechanism.
Fasteners
Cable Cutters
Fasteners
Cable Cutters
45206
Anchors
759
760
45207
Strut
High Performance
Ratchet Cable Cutters
Threaded
Rod
Compact Ratchet Cable Cutters
Pipe
Hangers
• Simple, one-hand operation.
• Compact - convenient for working in tight
places and stores easily in tool pouches.
• Single speed ratchet mechanism.
• Blade release allows blades to be opened
in mid-cut.
• Heavy-duty blades provide long life.Specifications
759 Specifications
Copper
Aluminum
Max. Use
500 MCM
Freq. Use
400 MCM
Communications Cable:
Length
10½"
Weight
1.4 lbs.
Tools
750 MCM
600 MCM
11⁄8" dia.
760 Specifications
Copper
Aluminum
Max. Use
1000 MCM
Freq. Use
750 MCM
Communications Cable:
Length
11¾"
Weight
5.5 lbs.
Abrasives
Part No.
759
760
1000 MCM
1000 MCM
1¾" dia.
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• No more pushing on stubborn release
buttons-the blades open automatically
when the cut is complete.
• Completely new ratchet mechanism improves durability.
• Narrow profile permits use in deep boxes,
against walls, or on floors.
• Durable, lightweight fiberglass handles..
Specifications
773 Specifications
Copper
Aluminum
Max. Use
500 MCM
Freq. Use
350 MCM
Communications Cable:
Length
15½"
Weight
5.3 lbs.
750 MCM
Max. Use
Freq. Use
500 MCM
Communications Cable:
Length
191⁄8"
Weight
5.8 lbs.
773
Compact Ratchet Cable Cutter
Compact Ratchet Cable Cutter
• Simple, one-hand operation.
• Two-speed ratchet mechanism adjusts for
light/heavy cutting.
• Well-suited for tight work spaces.
• Specially designed blade improves cutting
capacity.Specifications
795 MCM
750 MCM
13⁄16" dia.
774 Specifications
Copper
Aluminum
Part No.
Description
Performance
Ratchet Cable Cutters
795 MCM
750 MCM
13⁄16" dia.
Description
45206 Specifications
Copper
Aluminum
600 MCM
Max. Use
Freq. Use
500 MCM
Communications Cable:
Length
10"
Weight
1.5 lbs.
600 MCM
500 MCM
13⁄8" dia.
45207 Specifications
Copper
Aluminum
750 MCM
Max. Use
Freq. Use
600 MCM
Communications Cable:
Length
191⁄8"
Weight
5.8 lbs.
Part No.
42056
High Performance Ratchet
Cable Cutter
High Performance Ratchet
Cable Cutter
774
42057
1000 MCM
750 MCM
2" dia.
Description
Performance Ratchet Cable
Cutter
Performance Ratchet
Cable Cutter
Ratcheting Cable Cutter
OnSite
Supply
63060
Safety
• Cleanly cuts copper up to 400 MCM, as
well as aluminum and multi-conductor
cables up to 600 MCM.
• Unique ratchet action holds cable tight
and allows rapid, straight cuts with minimum effort.
• Hold-open spring speeds cutting action.
• Quick-release lever opens blade at anytime during operation.
• Large, finger-formed handles have limit
guards and plastic covering for comfort.
• Compact, lightweight tool can be locked
in closed position for pouch carrying.
• Not designed for cutting steel or ACSR.
Part No.
63060
Rentals
394
Hartford, CT
800-969-0285
Description
Ratcheting Cable Cutter
Boston , MA
800-645-6155
Wire Rope and Wire Cutters
• Cuts small diameter wire rope & wire
• Heavy-duty forged steel blades and handles
• Heat treated, precision ground, shear action cutting blades
• Cushioned handle grips.
Part No.
722
Description
Wire Rope Cutter
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
High Performance Communications Cable Cutter
Length
Weight
3 3/8" (86 mm) dia. communications cable (1800
pair X 24 AWG) Not for
use with electrical power
cable or cables with steel
strands.
18.3"
6.3 lbs.
Part No.
Description
High Performance Communications Cable Cutter
Length
Height
Weight
Battery
Part No.
2" diameter Copper or
Aluminum cable.
15.75"
14.25"
10 lbs.
18V 3.0 Ah, Li-Ion
Description
ESG50GL11 Battery-Powered Cable
Cutter, 120V charger
ESG50GL12 Battery-Powered Cable
Cutter, 12V charger
ESG50GL22 Battery-Powered Cable
Cutter, 230V charger
776
Capacity:
Length
Weight
Battery
Part No.
ES32-11
ES32-12
ES32-22
500 kcmil Cu or Al cable.
15.75"
4.4 lbs.
18V Li-Ion
Description
Battery-Powered Cable
Cutter, 120V charger
Battery-Powered Cable
Cutter, 12V charger
Battery-Powered Cable
Cutter, 230V charger
Philadelphia, PA
610-647-8070
776
High Performance ASCR Cable
Cutter
Gator-Plus™ Battery-Powered Cable Cutters
• Ram automatically retracts after the cut is
complete. No need to push a retract lever.
Tool is automatically ready to perform the
next cut.
• Two-speed pump advances the ram
quickly to start the cut.
• Cutting blades are specially hardened and
precision ground to hold their sharpness.
• Lightweight and easy to use.
• Cutting head rotates 360° for making cuts
in tight locations, and flips open to make
mid-span cuts easy.
• Includes one-hour battery charger, steel
carrying case and two batteries.
• Choice of a 120 volt, 230 volt, or 12 volt
battery charger.
ESG50GL
Gator™ Battery-Powered
Cable Cutter
Specifications
Description
Pipe
Hangers
Part No.
Tools
(Corded models available.
Please call for details)
Specifications
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• Patented mechanism opens the blades
automatically when the cut is complete.
• Completely new ratchet mechanism provides excellent durability.
• Short length fits easily into truck bins.
• Durable, lightweight fiberglass handles.
Abrasives
Cuts ACSR through 636
kcmil with steel core diameters less than 0.32" dia.
Specifically cuts:
All 336.4 and Smaller
SCSR; 397.5 - Brant,
Chickadee, lbis; 477.0
- Pelican, Flicker, Hawk;
556.5 - Osprey, Parakeet;
605.0 - Peacock; 636.0 Kingbird, Swift, Rook
Length
20"
Weight
6.2 lbs.
OnSite
Supply
Capacity:
Threaded
Rod
High Performance ASCR Cable Cutter
Specifications
Capacity:
778
• Small, light weight, ergonomic shape.
• Cutting blades automatically open when
the cut is complete.
• Cutting head rotates 350 degrees for access to tight spaces.
• Tool completes approximately 80 cutting
cycles per battery charge.
• Hardened blades provide long life.
• Includes two batteries, carrying case, and
battery charger.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
778
ES32-11
395
Rentals
Capacity:
Anchors
Specifications
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• No more pushing on stubborn release buttons - the blades open automatically when
the cut is complete.
• Blades can be opened easily in mid-cut if
repositioning is necessary.
• The short length and high-ratio ratchet
mechanism are especially useful in tight
locations.
• Complete new ratchet mechanism improves durability.
• Wide opening scissor-style blades make it
easy to get around large cables.
Strut
• Durable, lightweight, fiberglass handles.
Fasteners
Cable Cutters / Battery Powered Cable Cutters
Fasteners
Battery Powered Cutters
ETS8L Cable Tray Cutter
Anchors
• Cuts cable tray wires in 2 seconds.
• Cutting head is small and rotates 330° to easily get into the
right cutting position.
• Tool automatically retracts when a cut is complete, but it can be
retracted in mid-stroke if necessary.
• Makes flush cuts without burrs.
• Comes complete with 2 batteries, battery charger, and carrying
case.
• Available with 120 volt, 12 volt, or 230 volt battery charger.
Specifications
Strut
Capacity:
Length
Weight
Battery
750 kcmil Cu or 1000 kcm Al cable.
12.75"
3 lbs.
18V 3.0 Ah Li-Ion; 45 min. charge time
Cutting Capacities
1
3
/16"
/8"
/16"
1
Material
5
/16"
Threaded
Rod
•
•
•
•
Cable Tray
•
•
•
•
Threaded Rod
•
•
•
•
•
Threaded Rod
•
•
•
•
•
Steel Bolts
•
•
•
•
•
Steel Bolts
•
•
•
Copper/Alum
•
•
•
•
•
Pipe
Hangers
(Mild Steel, Zinc Plated)
(Stainless Steel)
(Stainless Steel)
(Grade 2)
(Grade 8)
•
Part No.
Description
ETS8L-11
ETS8L-12
ETS8L-22
Battery-Powered Cable Tray Cutter, 120V charger
Battery-Powered Cable Tray Cutter, 12V charger
Battery-Powered Cable Tray Cutter, 230V charge
Tools
Gator™ ES750
Battery-Powered Cable Cutter
Abrasives
ES750-11
/4"
Cable Tray
ETS8-11
1
• Compact design permits use in tight locations.
• Extra heavy blades for clean cuts and
long life.
• Makes approximately 20 cuts in 750
kcmil per battery charge.
• Easy to switch between forward and
reverse direction.
• Includes battery charger, one battery
and molded carrying case.
Specifications
Length
Weight
Battery
750 kcmil Cu or 1000 kcm
Al cable.
15.75"
4 lbs.
9.5V NiCad
Part No.
Description
Capacity:
ES750-11
ES32-22
Battery-Powered Cable
Cutter, 120V charger
Battery-Powered Cable
Cutter, 12V charger
OnSite
Supply
Greenlee Exclusive Multipurpose Tools
12-ton tools.
Get more for your money and carry fewer tools – with CCX. This
advanced line of multipurpose tools is designed to work with a
wide variety of cutting blades and crimping die adapters, and a
knockout punch adapter. Buy just one tool for countless electrical
construction and maintenance jobs.
When used with Greenlee KC12 dies in combination with Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, PennUnion® and Thomas & Betts® copper color-coded connectors,
crimps on copper lugs up to 750 kcmil are UL and cUL classified.
When used with Greenlee KA12 dies in combination with Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union®
and Thomas & Betts® aluminum color-coded connectors, crimps
on aluminum lugs up to 750 kcmil are UL and cUL classified. The
tools also accept all industry “U" type dies. These tools drive
knockout punches up through 55⁄8" diameter.
Choose between the 6-ton & 12-ton CCX systems.
6-ton tools.
Safety
Rentals
When used with Greenlee KC22 and KA22 dies in combination with
Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, PennUnion® and Thomas & Betts® color-coded connectors, connections
up to 600 kcmil (copper) and 350 kcmil (aluminum) are UL and cUL
classified. These tools also accept Greenlee, Burndy®, Kearney®,
Blackburn®, Panduit® and Thomas & Betts® dies used for 6-ton
tools. They can drive knockout punches up through 2" diameter.
396
Hartford, CT
800-969-0285
* Both tool groups have the same cutting capabilities. The products listed above are
registered trademarks of Anderson®, Blackburn®, FCI Burndy®, Kearney®, ILSCO®,
Huskie®, Panduit®, Penn-Union® and Thomas & Betts®.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Gator-Pro™ Battery-Powered & Corded CCX Tools
Quick Release
latch makes it easy
to get around cables
Fasteners
Cable Termination
Head Rotates 350° for
easy access to any area.
• 350° rotating head adjusts to your work position.
• Lightweight, plus ergonomic-angled handle for comfortable, lowstress use.
• Cycle in seconds with two-speed hydraulic pump, maximizing
productivity.
• Automatic retraction when crimping and cutting cycles are complete.
• Use optional CCX blades and adapters.
Anchors
Battery-Powered and Corded Tool Features:
Two Speed Ram
provides fast cycle times
Li-Ion Battery
E12CCXL provides
approximately 130
cycles per charge
ECCXL provides
approximately 400
cycles per charge
• Operates directly from 120V 60Hz or 230V 50Hz electrical outlets.
• No need to charge batteries or worry about running out of power.
• Equipped with 15' cord. Can be used with extension cord.
• Includes a high-impact molded carrying case.
Copper Color-Coded Lugs and Splices: 750 kcmil
Aluminum Color-Coded Lugs and Splices: 750 kcmil
5/8" Service Entrance Connectors: 10-1/0 AWG
.840 Service Entrance Connectors: 1/0-4/0 AWG
Aluminum Overhead “H” taps: 6 AWG-500 kcmil
One Piece ACSR Tension Splices: 4 AWG-556.5 kcmil
Two Piece ACSR Tension Splices: 2 AWG-556.5 kcmil
Copper Color-Coded Lugs and Splices: 600 kcmil
Aluminum Color-Coded Lugs and Splices: 300 kcmil
5
/8" Service Entrance Connectors: 10-1/0 AWG
.840 Service Entrance Connectors: 1/0-4/0 AWG
Aluminum Overhead “H” taps: 6-4/0 AWG
One Piece ACSR Tension Splices: 4-1/0 AWG
Two Piece ACSR Tension Splices: 2-4/0 AWG
Part No.
E12CCXL11
E12CCXL12
E12CCXL22
E12CCXL120
E12CCXL230
Philadelphia, PA
610-647-8070
Punching
Copper and Aluminum Cable: 1½"
Round: 2.42" in 10 ga. mild steel
ACSR: 954 kcmil (Cardinal)
(requires no accessories)
5
Standard Guy Strand: /8"
EHS Guy Strand: ½"
Ground Rod: ½"
Rebar (schedule 60): ½"
Threaded Rod: ¼", 3/8", ½", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
Description
Part No.
Battery-powered 12CCXL w/120V charger
Battery-powered 12CCXL w/12V charger
Battery-powered 12CCXL w/230V charger
Corded 12CCX, 120V, 60 Hz
Corded 12CCX, 230V, 50 Hz
Washington D.C.
877-419-2755
Pipe
Hangers
Punching
Copper and Aluminum Cable: 1½"
Round: 5 5/8" in 10 ga. mild steel
ACSR: 954 kcmil (Cardinal)
Rectangular: 2.677" x 5.433"
Standard Guy Strand: 5/8"
Square: 5.4333" x 5.433"
EHS Guy Strand: ½"
Accessories required to punch 4½" through 5 5/8"
Ground Rod: ½"
12185 Spacer, 04686 Bushing and 03170 Sleeve
Rebar (schedule 60): ½"
Threaded Rod: ¼", 3/8", ½", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
E12CCXL and ECCXXL Tool Capacities
Cutting
Crimping
Crimp
E12CCXL and ECCXXL Tool Capacities
Cutting
Crimping
ECCXL
Tools
E12CCXL
24,000 lb.
Crimping Force
12,000 lb.
Length
161⁄8"
14¾"
Height
13"
121⁄8"
Weight
14 lbs.
10.5 lbs.
Voltage
EC12CCXL120 (120VAC) ECCXL120 (120VAC)
EC12CCXL230 (230VAC) ECCXL230 (230VAC)
ECCXL11
ECCXL12
ECCXL22
ECCXL120
ECCXL230
Boston , MA
800-645-6155
Description
Battery-powered CCXL tool, 120V charger
Battery-powered CCXL tool, 12V charger
Battery-powered CCXL tool, 230V charger
Corded CCX Tool, 120V, 60 Hz
Corded CCX Tool, 230V, 50 Hz
Hartford, CT
800-969-0285
Abrasives
Punch
OnSite
Supply
Specifications
12,000 lb.
14¾"
121⁄8"
10.5 lbs.
18V, 3.0 Ah, Li-Ion
1 hour
397
Safety
24,000 lb.
Crimping Force
Length
161⁄8"
Height
13"
Weight
14 lbs.
Battery
18V, 3.0 Ah, Li-Ion
Charge Time
1 hour
ECCXL
Rentals
E12CCXL
Threaded
Rod
Corded Tool Features:
Automatically Retracts
when cycle is complete
or by pressing this
button anytime during
a cycle
Cut
Specifications
Strut
Battery-Powered Tool Features:
• Lithium Ion battery (Li-Ion) delivers up to 400 cycles per charge
with the ECCXL and 130 cycles per charge with the E12CCXL.
• Includes two batteries, a choice of either a 120V, 12V or 230V
one-hour charger, and a high-impact molded carrying case.
Fasteners
CCX Tool Accessories
CCX Tool Accessories
(optional, all in pairs except punch driver)
Anchors
Part No.
UA22
UA12T Adapters
Strut
for “U” dies are included with
E12CCX and C12CCX tools
UA22
UAK
UAW
UA12T
Part No.
Threaded
Rod
UCUNC38
UC26
UC40
UCACSR
Part No.
Pipe
Hangers
UCUNC14
UCUNC38
UCUNC12
UCM5
UCM6
UCM8
UCM10
UC40
Part No.
Tools
UA12P
Abrasives
OnSite
Supply
HCCX Hand-Powered 6-Ton Hydraulic Tool
• 360° rotating head – comfortable to use at any jobsite.
• Lightweight, compact size makes it easy to carry and easy to use.
• Two-speed hydraulic pump for short cycle time.
• Automatic retraction when crimping and cutting cycles are complete.
• Includes a carrying case with spaces for blades and adapters.
• Uses all optional CCX blades and adapters.
Safety
Specifications
Crimping Force: 12,000 lbs
Length:
20.75"
Weight:
8 lbs.
Part No.
Description
HCCX
Hand-Powered Hydraulic CCX tool
Rentals
398
Hartford, CT
800-969-0285
UCD3575
UCD3215
UCD3515
UPD6
Die Adapters
Description
ECCX
Adapter for Greenlee K22 dies
Adapter for Kearney “0”,
T&B “6 Ton”, & Blackburn
“OD” dies
Adapter for Burndy “W” &
Panduit “CD-2001” dies
(equivalent to “D3” die)
Adapter for “U” dies
(included with tool)
X
X
X
X
Cable Cutting Blades
Description
ECCX
Cutter Blades AL & CU 1"
Cutter Blades AL & CU 1½"
Cutter blades for ACSR
& guy strand
X
X
X
E12CCX
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Din Rail Cutting Blades
Description
ECCX
Cutter blades – 35 x 7.5
Cutter blades – 32 x 15 x 9
Cutter blades – 35 x 15
DIN Rail Punch (punches
15 mm x 6.2 mm hole in
35 x 7.5 & 35 x 15 DIN rail)
E12CCX
X
X
X
Threaded Rod Cutting Blades
Description
ECCX
Cutter blades, ¼" threaded rod
Cutter blades, 3⁄8" threaded rod
Cutter blades, ½" threaded rod
Cutter blades, M5 threaded rod
Cutter blades, M6 threaded rod
Cutter blades, M8 threaded rod
Cutter blades, M10 threaded rod
E12CCX
E12CCX
X
X
X
X
X
X
X
X
Part No.
Knockout Punch Adapter
Description
ECCX
UA12P
Punch Driver Adapter*
(accepts ¾" draw stud)
E12CCX
X
X
RCCX Remote-Powered 6-Ton Hydraulic Tool
• Operates with standard, 10,000 psi (700 bar) hydraulic pumps.
• 3⁄8" male screw-type coupler, operating pressure 10,000 psi.
• Includes a carrying case with spaces for blades and adapters.
• Uses all optional CCX blades and adapters.
Specifications
Crimping Force: 12,000 lbs
Length:
11.875"
Weight:
5.2 lbs.
Part No.
Description
RCCX
Remote-Powered Hydraulic CCX tool
Note: Not compatible with UA12T Adapter
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
16 ⁄8"
14¾"
14½ lb.
18 V, 3.0 Ah, Li-Ion
1 hour
7
EK12IDL11
Battery-Powered Dieless Crimping Tool, 115 V
Battery Charger
Battery-Powered Dieless Crimping Tool, 12 V
Battery Charger
Battery-Powered Dieless Crimping Tool, 230 V
Battery Charger
18V 3.0 Ah Ni-MH Battery
provides many crimping cycles per charge
Ergonimically Angled
handle provides good balance
*UL and cUL classified with Anderson®, Blacburn®, Burndy®, ILSCO®, Panduit®,
Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors. The products listed
above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts® and Tyco®
Pipe
Hangers
Description
Specifications
Copper #4 AWG - 1000 kcmil
Aluminum #6 AWG - 1000 kcmil*
26.5"
16.5 lbs.
Description
1990
32891
Dieless Crimping tool to 1000 kcmil
Replacement Pressure Test Kit, includes 30
test slugs and gauge
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®,
Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors. The products listed
above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts® and Tyco®
EK628 6-Ton Battery Crimping Tool
• When equipped with CJK crimping jaws, can be used with
Thomas & Betts “6Ton” crimping dies.
Specifications
Crimping Force:
Length:
Width (jaws open):
Weight:
Battery:
Crimp Cycle Time:
Battery Charge Time:
Part No.
EK628L11
EK628-DL12
EK628-DL22
CJD3
CJK
Philadelphia, PA
610-647-8070
6 tons
18 ½"
4¼"
6.0 lbs.
18 Volt, 3.0 Ah Li-Ion
6 seconds
1 hour
Description
Crimping tool w/120 V battery charger
Crimping tool w/12 V battery charger
Crimping tool w/230 V battery charger
Crimping jaw unit- “W” dies
Crimping jaw unit- Thomas & Betts “6-Ton” dies
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
• Slim profile & light weight permit one hand operation.
• Crimping jaws automatically open to signal that
crimp is complete.
• Crimping jaws can be opened in mid-cycle to
adjust connector.
• Interchangeable crimping jaws rotate 350°
• Two batteries, battery charger and molded carrying
case are included.
• Choice of 120V, 12V, or 230V battery charger.
• UL & cUL classified from 8 AWG to 600 kcmil with
Anderson, Blackburn®, Burndy, ILSCO, Panduit,
Thomas & Betts, and Penn-Union copper code colorcoded connectors when used with Greenlee KC22
crimping dies; to to 350 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and
Penn-Union aluminum code color-coded connectors
when used with Greenlee KA22 crimping dies.
• When equipped with CJD3 crimping jaws, can be
used with all industry “W” style crimping dies.
Hartford, CT
800-969-0285
399
Abrasives
Part No.
• Dieless crimping head; no dies to lose or replace.
• Patented pressure system automatically changes crimping force for
each connector size/type. Eliminates errors.
• Seven indent profile requires fewer crimps per connector.
• Automatic two-speed pump for rapid advance.
• 15 ton maximum crimping force.
• Swivel head rotates 180° for maximum flexibility.
• Hinged head for easy connector loading and unloading.
• Includes Pressure Test Kit and carrying case.
• Not for use with “C” and “H” taps.
Tools
Dieless Crimping Tool to 1000 kcmil (MCM)
OnSite
Supply
Capacity:
Length:
Weight:
Safety
Threaded
Rod
Crimping Head Rotates
350° to get into tight locations
Part No.
EK12IDL12
EK12IDL22
Automatically Retracts
when cycle is complete
or by pressing this button
anytime during a cycle
Rentals
Length:
Height:
Weight:
Battery:
Battery Charge Time:
Two Speed Pump
provides rapid crimping cycle time.
Dieless Indent
style crimping head does
not require interchangeable
crimping dies
Specifications
Flip Open Crimping Head
will allow crimping of 4 AWG - 1000 kcmil Cu and
6 AWG - 1000 kcmil Al with no dies to change.
Fasteners
• Two-speed pump advances the ram quickly to start the crimp. The
ram automatically retracts after the crimp is complete.
• Lightweight, angled pistol grip and a 350° rotating head.
• Flip open crimping head will allow crimping of 4 AWG – 1000 kcmil
copper or 6 AWG – 1000 kcmil aluminum* with no dies to change.
• Dieless indent style crimping head does not require interchangeable
crimping dies.
• Includes two batteries, battery charger, carrying case, test gauge and
test slugs.
• Choice of a 120 volt, 230 volt, or 12 volt one-hour battery charger.
Anchors
EK12IDL 12-Ton Battery Dieless Crimping Tool
Strut
Cable Termination
Fasteners
Crimping Dies
Anchors
KC22
KD6
Strut
Crimping Dies for 6-Ton Tools
• All dies on this page for use with 6-Ton Crimping Tools.
• Includes steel carrying case.
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
(Requires UA22 adapter when used with CCX tools)
Threaded
Rod
22 Series Crimping Dies
Pipe
Hangers
Tools
Cable Size
8 AWG
6 AWG
4 AWG
2 AWG
1 AWG
1/0 AWG
2/0 AWG
3/0 AWG
4/0 AWG
250 kcmil
300 kcmil
350 kcmil
400 kcmil
500 kcmil
600 kcmil
Aluminum
Cat. No.
Color
KA22-8
Blue
KA22-6
Gray
KA22-4
Green
KA22-2
Pink
KA22-1
Gold
KA22-1/0
Tan
KA22-2/0
Olive
KA22-3/0
Ruby
KA22-4/0
White
KA22-250 Red
KA22-300 Blue
KA22-350 Brown
—
—
—
—
—
—
Copper
Cat. No.
Color
KC22-8
Red
KC22-6
Blue
KC22-4
Gray
KC22-2
Brown
KC22-1
Green
KC22-1/0
Pink
KC22-2/0
Black
KC22-3/0
Orange
KC22-4/0
Purple
KC22-250 Yellow
KC22-300 White
KC22-350 Red
KC22-400 Blue
KC22-500 Brown
KC22-600B Green
*Note: Connections are UL and cUL classified for copper and aluminum, when used
with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®,
Thomas & Betts® and Penn-Union® color-coded lugs and splices.
Abrasives
Dies for use with Service Entrance Connectors, C-Taps, H-Taps,
Overhead & Underground Connectors
(Requires UAW adapter when used with CCX tools, Requires
CJD3 jaw when used with EK628 tools)
Crimping Dies for 12-Ton Tools
• All dies on this page for use with 12-Ton Crimping Tools.
• Includes steel carrying case.
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
OnSite
Supply
Cat. No.
KD6-10
KD6-11
KD6-12
KD6-13
KD6-14
KD6-15
KD6-16
KD6-17
Burndy No.
W-BG
W-O
W-C
W-K840
W-161
W-162
W-163
W-165
Cat. No.
KD6-18
KD6-19
KD6-20
KD6-21
KD6-22
KD6-24
KD6-25
KD6-27
Burndy No.
W-166
W-243
W-247
W-249
W-164
W-237
W-239
W-28K
Safety
Part No.
Description
Die Kit for #8-600 Copper Connectors Includes all copper die sets listed below
Die Kit for #8-600 Aluminum Connectors Includes all Aluminum die sets listed below
K22S1GL
KD06AL
Dies for use with Service Entrance Connectors, C-Taps, H-Taps,
Overhead & Underground Connectors
Additional “U” Series Crimping Dies
Cat. No.
Burndy No.
Cat. No.
KD12-10
U-BG
KD12-30
KD12-11
U-O
KD12-31
KD12-12
U-C
KD12-32
KD12-14
U-161
KD12-33
KD12-15
U-162
KD12-35
KD12-16
U-163
KD12-36
KD12-17
U-165
KD12-37
KD12-18
U-166
KD12-38
KD12-19
U-243
KD12-39
KD12-20
U-247
KD12-40
KD12-21
U-249
Rentals
Hartford, CT
800-969-0285
Burndy No.
U-D3
U-E
U-F
U-997
U-238
U-654
U-655
U-658
U-659
U-998
Part No.
Description
K22S1GL
Die Kit for #6-750 Copper Connectors Includes all copper die sets listed below except
KC12-8
Die Kit for #8-600 Aluminum Connectors Includes all Aluminum die sets listed below
except #35776
KD06AL
400
Copper
Cat. No.
Color
KC12-8
Gray
KC12-6
Blue
KC12-4
Gray
KC12-2
Brown
KC12-1
Green
KC12-1/0
Pink
KC12-2/0
Black
KC12-3/0
Orange
KC12-4/0
Purple
KC12-250 Yellow
KC12-300 White
KC12-350 Red
KC12-400 Blue
KC12-500 Brown
KC12-600 Green
KC12-750 Black
*Note: Connections are UL and cUL classified for copper and aluminum, when used
with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®,
Thomas & Betts® and Penn-Union® color-coded lugs and splices.
“W” -Style Dies
“U” Series Crimping Dies
Aluminum
Cable Size
Cat. No.
Color
8 AWG
35576
Blue
6 AWG
35577
Gray
4 AWG
35579
Green
2 AWG
35580
Pink
1 AWG
35791
Gold
1/0 AWG
35792
Tan
2/0 AWG
35793
Olive
3/0 AWG
35794
Ruby
4/0 AWG
35785
White
Red
250 kcmil
35786
300 kcmil
35787
Blue
350 kcmil
35788
Brown
400 kcmil
35789
Green
500 kcmil
35795
Pink
600 kcmil
Black
35790
750 kcmil
35796
Yellow
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Strut
Anchors
Rechargeable Test and Measurement Instruments
Fasteners
Test & MEasurement Instruments
2290-21
2310-22 Specifications
Volts:
12 V DC
LCD Display:
2.4" Hi-Res Color
Camera Head Dia.:
0.7" (17mm)
Image Zoom:
2X
LED Brightness Adjust: (3X) Control
Cable Length
3'
Part No.
2310-22
2300-20
Description
M-Spector™ Digital Camera Kit
M-Spector™ Digital Camera Kit
4-AA Batteries, (does not include 12V Battery or Charger)
2310 / 2300 Accessories
Part No.
Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0115 Replacement Camera Cable
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommended maximum extension is 19')
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
2310-22 Specifications
Volts:
12 V DC
LCD Display:
3.5" Hi-Res Color
Camera Head Dia.:
0.7" (17 mm)
Adj. Image Zoom:
4X
LED Brightness Adjust: (4X) Control
Cable Length
3'
Part No.
2311-21
2312-21
Description
M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
2311 Accessories
Part No.
Description
• Measures depth and location of rebar up
to 6” through concrete
• Detects location of wood, PEX, PVC, and
metal
• Differentiates between steel (ferrous) and
copper or aluminum (non-ferrous) metals
• Embedded AC voltage detection to identify the location of live wires
• Intuitive user interface displays stud
centers and edges
• High contrast white on black display and
backlight for easy reading
• Rugged over-molding improves durability
and user grip
• Auto-calibration for all surfaces
• KIT Includes Battery, Charger &
Carrying Case.
2290-21 Specifications
Volts:
12 V DC
Detection depths of various materials:
Wood/Metal Stud:
1-1/2 inches
Plastic:
3 inches
Ferrous Metal:
6"
Non-Ferrous Metal: 6"
Position Accuracy:
Wood:
1/4"
Non-Ferrous:
1/2"
Ferrous:
1/2"
Scan for AC Electrical: Yes
Display Resolution:
0.5"
Backlight:
Yes
Non-Contact Voltage: Yes
Indication:
Visual (for NCVD)
Part No.
2290-21
2290-20
Description
Detection Tool Kit
Detection Tool, Tool Only
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
401
Pipe
Hangers
FEATURES:
Tools
• KIT Includes 3' Camera Cable, Battery,
Charger and Carrying Case.
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for automotive applications.
Abrasives
• Crystal clear, 2.4" high-resolution, color
display.
• Exclusive image zoom (2X) and LED
brightness control.
• Durable, detachable, 3' water-tight flexible cable and a small camera head fits
through holes as small as 3/4".
• Extension camera cables available to
extend reach of camera.
• One-handed operation.
• 15 hour run-time.
• Also available in 4-AA battery configuration
or tool only.
OnSite
Supply
12V Li-Ion M-Spector™
Digital Inspection Cameras
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
Safety
2310-22
A heavy duty pistol grip detection tool
for professional, commercial and industrial applications. Detects rebar up to 6"
deep in concrete, as well as the location
and depth of materials beneath gypsum,
OSB, ceramic tile and marble. Four wheel
design for durability and smooth, accurate
measurement.
Rentals
2311-21
Threaded
Rod
12V Li-Ion SUB-SCANNER™
Detection Tool Kit
Fasteners
Test & Measurement instruments
Rechargeable Test and Measurement Instruments
Anchors
12V Li-Ion
Clamp Meters
12V Li-Ion Thermometers
Strut
A True-RMS current tester for professional commercial and industrial
applications. The clamp meters feature
an ergonomic pistol grip design greatly
increasing comfort and ease-of-use
in overhead applications. The units
also provide wide 1.30 or 1.57" jaw
openings to easily handle very large
conductors, a thin jaw profile for access
to tight spaces, a large white on black
display, embedded non-contact voltage
detection, and embedded extra bright
LED floodlight.
Threaded
Rod
HVAC/R CLAMP-GUN™ Clamp Meter Kit 2238-21
• Large jaw size of 1.30" measuring up to 750 MCM cable
• CAT IV 600V / CAT III 1000V for greater safety
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(Dual Banana), Carrying Case and Manual
Pipe
Hangers
2238-21 Specifications
TRMS:
Safety Rating:
Current AC:
Microamps:
Part No.
YES
CAT IV 600V/
CAT III 1000V
600A
600µA
Voltage AC/DC:
Contact Temp:
Resistance:
LED Light:
1000V
-40° F to 1000°F
600 kOhms
YES
Tools
CLAMP-GUN Clamp Meter Kit 2239-21
™
• Extra-large jaw size of 1.57" measuring up to 1000 MCM cable
• In-rush current measurement for motor starts
• Extra bright LED flood light and built-in voltage detection
Abrasives
• KIT Includes Battery, Charger, Test Lead Set, Carrying Case,
and Manual
2239-21 Specifications
TRMS:
YES
Safety Rating: CAT IV 600V/
CAT III 1000V
In-Rush Current: 100mS
Part No.
HVAC/R LASER-TEMP GUN™ Kit 2277-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Measures ambient humidity and dew point
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2277-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity:
Adj. .10
Basic Accuracy:
1.50%
Distance to Spot: 40:1
Contact Temperature: -40°F to 1022°F Data Storage:
20 points
Part No.
Description
2238-21 12V Li-Ion HVAC/R Clamp Meter Kit
2238-20 12V Li-Ion HVAC/R Clamp Meter, Bare Tool ONLY
A heavy duty pistol grip infrared thermometer
for professional, commercial and industrial
applications. Powered by the Milwaukee M12
Lithium Ion battery, LASER-TEMP GUNs™ can
safely measure temperatures between -22 to
1472° F with a 40:1 distance to spot ratio for
even the most demanding industrial applications. Designed with embedded non-contact
voltage detection and an extra bright LED
Floodlight to increase end user productivity.
Voltage AC/DC:
Contact Temp:
Resistance:
LED Light:
1000V
-40° F to 1022°F
600 kOhms
YES
LASER-TEMP GUN™ Kit 2276-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2276-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity:
0.10 to 1.0
Contact Temperature: -40°F to 1022°F Distance to Spot: 40:1
Basic Accuracy:
1.50%
Data Storage:
20 points
Part No.
Description
OnSite
Supply
2239-21 12V Li-Ion Clamp Meter Kit
2239-20 12V Li-Ion Clamp Meter, Bare Tool ONLY
Safety
• Powered by 3 AA Alkaline batteries
• Infrared surface temperature measurement
from -20° F to 932° F.
• 12:1 distance to spot ratio. Measures a
one-foot spot from 12 feet away.
• User Configurable Hi/Low Alarm Settings
• K-type thermocouple input for contact temperature
• High Contrast, White on Black Display with
Backlight for easy reading
Rentals
Hartford, CT
800-969-0285
Description
2276-21 12V Li-Ion LASER-TEMP GUN™ Kit
2276-20 12V Li-Ion LASER-TEMP GUN™, Bare Tool ONLY
LASER-TEMP GUN™ 2266-20
402
Description
2277-21 12V Li-Ion HVAC/R LASER-TEMP GUN™ Kit
2277-20 12V Li-Ion HVAC/R LASER-TEMP GUN™, Bare Tool ONLY
• Hold, Max Value Functions
• Slide rail for mounting 2201 Voltage Detector
• 0.95 fixed emissivity
2266-20 Specifications
Temperature Range: -22°F to 1472°F Emissivity:
0.95
Distance to Spot: 12:1
Basic Accuracy: 1.50%
Response Time:
< 500 ms
Part No.
Description
2266-20 LASER-TEMP GUN™ Kit
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Description
2205-20 Fork Meter
Voltage Range
6mV to 600V AC/600mV to 600V DC
Safety Category Rating CAT III 600V
Temperature Range
-40°F to 752°F
AC Amps
0.001-10.00A
DC Amps
0.001-10.00A
Frequency
Yes
Lo-Z
Yes
Hz (Amps or Volts)
9.999Hz-50.00kHZ
Same as VDC (no switch function)
mV DC
Ohms
600.0 Ohm-40.00M Ohm
K-Type Thermocouple input Yes
MIN/MAX/AVG/DIF
MIN/MAX
Continuity
YES<30Ohms
Capacitance
0.1-1000uF
Backlight
Yes
Temp
Yes
Hold
Yes
Bargraph
Yes
Display
High Contrast White on Black
Switch Type
Dial
Accessory Attachment Proprietary rail system; NCVD, Magnet
Part No.
Description
2217-20 Digital Multimeter
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Clamp Meter 2237-20
Abrasives
600V AC/DC
CATIII 600V
600
600
Yes
1 Hz-10.00kHZ
Same as VDC
(no switch function)
6 kohms
MIN/MAX
Yes
Yes
Yes
Yes
Yes
1.3"
White on Black
Yes
Yes
Visual (for NCVD)
Dial
A heavy duty True-RMS electrical current
tester for professional residential, commercial, and industrial applications. The perfect
tool for the professional electrician, the Clamp
Meter provides a wide 1.3” jaw opening to
easily handle large conductors, a thin jaw
profile for access to tight spaces and a high
contrast white-on-black display for clearer
readings. Designed with embedded non-contact voltage detection and an LED work light
to increase end user productivity. Covered by
Milwaukee 5-Year Warranty. Includes (2) AA
Alkaline Batteries, Test Leads and Manual
Part No.
OnSite
Supply
Voltage Range
Safety Category Rating
AC/DC Amps
AC/DC Volts
Frequency
Hz (Amps or Volts)
mV DC
Ohms
MIN/MAX/AVG/DIF
Continuity
Capacitance
Backlight
Hold
Zero
Jaw Size
Display
Non-Contact Voltage
LED Work Light
Indication
Switch Type
Safety
2237-20 Specifications
Threaded
Rod
2217-20 Specifications
Pipe
Hangers
Part No.
1000V AC/DC
CAT IV 600V
CAT III 1000V
0.63"
200
Yes
Same as VDC
(no switch function)
600.0 Ohm40.00M Ohm
Yes
No
Yes
No
Yes
White on Black
Yes
Yes
Visual (for NCVD)
Dial
Tools
Voltage Range
Safety Category Rating
Fork Opening
AC Amps
Lo-Z
mV DC
Ohms
Continuity
Capacitance
Backlight
Temp
Hold
Display
Non-Contact Voltage
LED Work Light
Indication
Switch Type
A heavy duty, True-RMS meter for professional residential, commercial and industrial
applications. The perfect tool for the professional electrician, featuring rugged overmolding for increased durability and grip, a
large white on black display for clearer readings, a slide rail system to add proprietary
accessories and over-molded dial for easy
one handed use. Meets the safety specifications required by the electrical user. Covered
by Milwaukee 5-Year Warranty. Includes (2)
AA Alkaline Batteries, Test Leads Dual
Banana Thermocouple and Manual
Description
2237-20 Clamp Meter
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
403
Rentals
2205-20 Specifications
Digital Multimeter 2217-20
Anchors
A heavy duty True-RMS electrical tester for professional residential, commercial and industrial applications. Four tools in one,
providing current measurement, voltage measurement, voltage
detection and task lighting. The fork meter provides a wide 0.63”
fork opening, high 200 amp current range and a high contrast
white-on-black display. Covered by Milwaukee 5-Year Warranty.
Includes (2) AA Alkaline Batteries, Test Leads and Manual
Strut
Fork Meter 2205-20
Fasteners
Test & MEasurement Instruments
Fasteners
Electrical Test instruments
Anchors
Digital Multimeter
Strut
Threaded
Rod
Pipe
Hangers
• Autoranging,
3-5/6-digit,
5000-count
display for
greater accuracy.
• Frequency and
capacitance
measurements
plus diode
and continuity
tests standard.
• Data hold to
capture measurements.
• RS-232
capable, may be connected to a PC for
extended measurement capability with
optional optically-isolated interface
DMSC-8L, purchased separately.
• Low ohm range calibration, subtracts
test lead resistance.
• Backlit display for easy viewing.
• True RMS for no-compromise accuracy.
• Accessories included: (1) 9V battery, carrying case, test leads.
Specifications
Voltage
50.00, 500.0mV; 5.000,
Measurement: 50.00, 500.0, 1000V
Tools
Amperage
500.0, 5000µA; 50.00,
Measurement: 500.0mA; 5.000, 10.00A
Resistance:
50.00, 500.0Ω; 5.000,
50.00, 500.0kΩ; 5.000
50.00MΩ
Capacitance: 50.00, 500.0nF; 5.000
50.000, 500.00, 9999µF
Frequency:
10Hz-125kHz
Professional Plant
Digital Multimeter
Digital Multimeter
• Autoranging
for convenient
operation.
• Record max,
min, max-min,
and average
readings and
data hold.
• Relative offset
display mode
to see relative
changes in measurements.
• Frequency,
temperature,
and capacitance
measurements plus diode and continuity
tests standard.
• Auto power off and low battery indicator.
• HAR feature to measure harmonic content.
• True RMS for no-compromise accuracy.
• Accessories included: (1) 9V battery, test
leads, bead temperature probe).
Specifications
ACV - 999.9mV, 9.999,
Voltage
Measurement: 99.99, 750V DCV-999.9mV,
9.999, 99.99, 999.9MV
Amperage
ACA-400µA, 40.00mA,
Measurement: 10.00A; DCA-40.00,
400µA, 4.000, 40.00mA,
4.000, 10.00A
Resistance:
9.999O; 9.999, 99.99,
999.9Ω; 4.000, 40.00MΩ
Capacitance: 1.000, 10.00, 100.0µF,
1.000, 10.00MF
Abrasives
Frequency:
Temperature: K type, -4°F to 932°F
(-20°C to 500°C)
Measurement
Category:
Measurement Cat III, 600V; Cat II, 750V
Category:
AC/1000V DC per UL 3111-1
Part No.
Description
OnSite
Supply
DM-800
Digital Multimeter
DM-820
Digital Multimeter, incl.,
Record max, min, and max-min readings.
Specifications
Voltage
Amperage
Resistance:
AC Detective
Voltage
Detection Range:
AC/DC - 60mV to 1000V
AC/DC - 600mA to 8A
600Ω; to 60MΩ
30V-500V+
Capacitance: 2.500, 25.00, 250.0nF;
2.500, 25.00µF
Frequency:
50Hz-400kHz
Measurement Cat III, 600V; Cat II, 750V
Category:
AC/1000V DC
Part No.
Description
DM-210A
Digital Multimeter
.999, 99.99, 999.9Hz;
9.999, 50.00kHz
Temperature: K type, -58°F to 1832°F
(-50°C to 1000°C)
Cat IV, 600V; Cat III, 1000V
• Auto and manual
ranging for convenient operation.
• Non-contact and
single probe voltage detection.
• Beep-Jack™ audible
and visible warning
to guard against
improper A and mA
terminal plug in..
• High visibility 6000
count LCD display.
• Capacitance and
temperature measurement capability.
• Auto power off, display backlight, analog
bar graph.
• PC interface capability using optional
USB RS-232 cable with data recording
PC software.
Part No.
Description
DM-510
Professional Plant
Digital Multimeter
Specifications
Safety
DC V:
1.8-600.0; -0.6 to -600.0V
Amperage
250.0, 2500µA; 25.00,
Measurement: 250.0mA; 2.500, 10.00A
Resistance:
2000Ω with continuity
beeper
Display
6000-count LCD
Jaw Opening: 1.06"
Measurement Cat III, 600V per UL 3111-1
Category:
AC/1000V DC
Rentals
Part No.
Description
CMT-80
CMT-90
Automatic Electrical Tester
Same, to 1000V
404
Hartford, CT
800-969-0285
Automatic Electrical Tester
• Hassle free, automatic measurement of amperage,
voltage, and resistance.
• Compact design for measuring in tight spaces.
• 400A AC, 600V AC/DC measurement.
• Data hold to capture important readings.
• Auto off for longer battery life.
• Accessories included: (1) 9 V battery, test
leads, carrying case.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
CS-8000 Circuit Seeker™ Circuit Tracer
FEATURES:
Jaw Opening: 1.38"
Voltage Output: 10mV output/1 amp input
Display:
3-1/2 digit LCD, 2000 ct.
Measurement
Category:
Cat III, 600V per UL 3111-1
Part No.
Description
CM-600
AC Clamp-on Meter
1000A AC/DC True RMS Clamp Meter
• True RMS for the
most accurate measurement when harmonics are present
• AC/DC amperage, AC/
DC voltage, frequency
and resistance measuring capability.
• Dual Hall sensor for
the most accurate
measurements.
• Easy to read backlit
display for use in low
light conditions.
• Peak and data hold to
capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
Philadelphia, PA
610-647-8070
Specifications
Receiver:
Temperature: 32° to 122° F
6,500 ft. maximum
Altitude:
Indoor Use Only
Transmitter:
Strut
Threaded
Rod
Specifications
Operating Conditions:
Measurement
Category:
Category III, 750V
Operating
Voltage:
0-750 V AC/DC
Live-Line LED: Indicates voltage > 12 VAC
or 5 VDC
Frequency:
15.15 kHz
Power:
2 AA Batteries
Low Battery Indicator
Range from Receiver to Item with Signal
Strength:
Live Line Mode: Up to 20 ft. from circuit
Open Line Mode: Up to 10 ft. w/ metallic
connection to ground
1-3 ft. with capacitive
ground reference
Power:
2 AA Batteries
Low Battery Indicator
Part No.
Description
CS-8000
Circuit SeekerTM
Pipe
Hangers
Amperage
Measurement: 400.0, 600A,
Resistance:
2000Ω
Tools
Abrasives
Voltage
Measurement: 400.0, 600V
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9 V battery, test
leads, carrying case.
Specifications
OnSite
Supply
Specifications
Voltage
AC V - 400.0, 750V
Measurement: DC V - 400.0, 1000V
Amperage
Measurement: 400.0, 1000A
Resistance:
Frequency:
Display:
Jaw Opening:
Category:
Part No.
400.0Ω
0.400kHz
4000 count LCD
2.0"
Cat IV, 600V; Cat III, 750V
AC/1000V DC
Description
CM-1550 1000A AC/DC True RMS
Clamp Meter
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Line Splitter (NEMA 5-15)
• For use with all models of clamp-on
meters.
• Splits lines for independent testing with
clamp-on meter.
Part No.
93-30
Hartford, CT
800-969-0285
Description
Safety
• Both AC amperage
and AC/DC voltage
measurement.
• Resistance measurement up to 2000Ω.
• Auto power off for
longer battery life.
• Advanced non-directional sensing technology.
• Superior sensitivity and functionality for accurate tracing and locating.
• Ergonomic receiver with full-color graphical
LCD.
• Graphics and audible signal provide quick and
easy to understand tracing feedback.
• Traces concealed wiring, locates junction boxes,
and finds breakers for live or open circuits.
• Locates and identifies blown fuses.
• Finds shorts and breaks in conductors.
• Low pitch, high volume audible indicator.
• User-selectable automatic or manual gain capability for fast, convenient use.
• Power saving features promote extended battery life (Auto Power Off).
• Can be used on GFCI protected circuits.
• Supports transmitter-to-receiver distances up to 4 miles for closed circuit tracing.
• Does not affect sensitive electronic equipment on the circuit.
• Auto backlight on receiver maximizes battery life.
• Lifetime Limited Warranty.Specifications
Line Splitter (NEMA 5-15)
405
Rentals
AC Clamp-on Meter
Fasteners
Electrical Test instruments
Fasteners
Electrical Test instruments
Anchors
Strut
Buried Line Locator
Tracker II
Threaded
Rod
Pipe
Hangers
• High frequency transmitter ranges up to 4000 ft & depths to 7 ft.
• The transmitter offers three methods of connection: direct,
inductive coupler, or inductive antenna.
• Inductive antenna is built into the case housing and allows the
transmitter to be placed on the ground over the wire path to
radiate a signal down onto the conductor.
• Inductive coupler clamps around the wire or pipe for use on active lines or where isolating the line is not an option.
• 32' lightweight receiver provides both audible & visual indications
of signal strength for accurate identification.
• Transmitter output and receiver sensitivity are both fully adjustable for maximum accuracy.
• Includes transmitter assembly, receiver assembly, inductive
coupler (clamp), inductive antenna (built-in), two 8 ft. test leads
with heavy-duty alligator clips and a durable polyethylene case.
Optional headset is available for use in high traffic areas or
other noisy environments.
• 1 year Warranty.
Tools
Specifications
Transmitter
Depth Range:
Depth Resolution:
Passive Trace Freq.:
Abrasives
BLL-200
OnSite
Supply
Safety
• High voltage signal pulses radiate into the earth
at the location of the faults.
• With an A-frame mounted receiver, an analog
meter indicates the source of the voltage.
• Multiple faults on a single wire can be identified indicating the need to replace instead of repairing.
• Extra long test leads feature heavy-duty alligator
clips for use on multiple cable types.
• Includes a rechargeable transmitter, receiver,
A-frame, ground stake,
• 120V AC charger, 12 volt DC (cigarette lighter)
adapter, complete operating instructions and
molded carrying case included. 1-year warranty.
• Battery-operated; (1) 12V & (1) 9V included.
Rentals
406
Hartford, CT
800-969-0285
Measures: 0 - 15 ft. Traces: 0 - 20 ft.
±(10% reading + 0.2 ft)
0.1 ft increments
12Hz - 24kHz
Part No.
Tracker II Line Tracer
Pulser Fault Locator
0-600 VAC; 0-300 VDC
13mA (Open Line); 150mA (live/shorted line)
33.3 kHz
Operating Voltage:
Current:
Frequency:
Description
501
Specifications
Receiver
Transmitter Frequency: 447.5kHz
Transmitter Power: 40Vp-p (140mW) maximum
Voltage Protection: 240VAC/500VDC
Automatic Shut-Off: 90 minutes - Transmitter & Receiver
Part No.
• LED and LCD signal strength indicators make it quick and easy
to find exact line location.
• Lightweight and ergonomically balanced.
• Automatic signal boost makes it easy to trace lines, even those
with very weak signals.
• Receiver may be used in active or passive mode.
• Receiver locates multiple passive frequencies with a single setting.
• Receiver automatically locks out passive range when it detects
a transmitter signal, reducing the chance of tracing other lines
carrying weaker signals.
• Microprocessor based circuitry delivers increased accuracy and
features auto-gain control in all environments.
• Traces 20' underground and provides depth readings up to 15'.
• Transmitter can be connected to live lines up to 600V.
• Lifetime Limited Warranty. Molded carrying case included.
Description
Buried Line Locator
See Pages 436 -437 for
Ridgid Utility and Line
Locators
Specifications
Transmitter Frequency: 447.5kHz
Transmitter Power: 2400VDC Peak
Voltage Protection: 240VAC/400VDC
Part No.
PE2003
Description
Pulser Fault Locator
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• Cools threads and pipe during operation.
• Speeds metal removal.
• Improves thread quality
RIDGID thread cutting oils are free of chlorine and other halogens, PCBs and
heavy metals.Complete material safety data sheet available.
Fasteners
Thread Cutting Oil
Anchors
Cutting Oil / Thread Sealant
Nu-Clear® Oil – Clear mineral oil with low odor and anti-mist formulation.
Special low temperature properties maintain workable viscosity to -20°F.
Extreme Peformance Oil – High performance mineral oil formulated to
produce superior quality threads on stainless steel and black pipe.
Nu-Clear
1 Qt.*
1 Gal.
5 Gals
55-Gal Drum
16 oz**
41565
70835
41575
41585
—
Catalog No.
Dark
Extreme Performance
41590
70830
41600
41610
—
Case
Pkg
74007
74012
74047
76767
22088
Threaded
Rod
Size
Strut
Dark Oil – Traditional mineral oil with low odor and anti-mist formulation.
12
6
1
1
12
Thread Sealant
Pipe
Hangers
* Flip-top included with every quart bottle.
** Aerosol can.
Part No.
Description
84282
84287
84292
84332
84337
1/2 pint can (brush-in-can)
1 pint can (brush-in-can)
1 quart can (brush-in-can)
1/2 pint can (brush-in-can)
1 pint can (brush-in-can)
Don't stand for anything less than the best.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
407
Rentals
Safety
OnSite
Supply
RIDGID White Sealant with ultra-fine Teflon particles allows for tighter seal
with less effort. The formula is not affected by oils, dilute acids or common
solvents and can be used on PVC, CPVC, ABS, nylon, polypropylene, polybutylene, delrin, cycolac, as well as on metal pipes. RIDGID White Sealant should
not be used on lines carrying oxygen, halogens or liquid sodium.
Abrasives
The Gray Sealant is a smooth extra-tacky paste that clings to the threads
and provides a leak-proof seal. RIDGID Gray Sealant prevents thread corrosion and is approved for use in water, steam, air and natural gas, as well as
in diluted acids, caustics, LPG and oil lines. RIDGID Gray should be used on
metal pipes only.
Tools
RIDGID Gray and White proprietary formulas are NFS and UPC listed and approved for potable water use. The non-toxic, lead-free formulas won’t harden
or freeze, allowing easy disassembly of joints without compromising thread
integrity.
Fasteners
Threading Machines
Model 300 Complete
Anchors
FEATURES:
Strut
• RIDGID speed chuck.
• Reversible 1/2 HP universal motor.
• Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and
4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod
• Recessed On/Off/Reverse switch.
• CSA approved.
• Approved to UL standards (NRTLC).
Consists of:
Threaded
Rod
• #300 Power Drive only with foot switch.
• #1206 Stand
• #311 Carriage with lever
• #341 Reamer
• #360 Cutter
• #811A Universal die head
• Set 1/2" - 3/4" Universal alloy dies
• Set 1" - 2" Universal alloy dies
• #32 Transporter
• #418 Oiler
• 1 gallon Nu-Clear thread cutting oil
Specifications
Pipe
Hangers
Tools
ACCESORIES
42575
Model 32
Transporter
Abrasives
OnSite
Supply
42380
Model 1452
Tray
Ordering Information
Part No. Model
Safety
15682
15722
41855
75075
41860
300
300
300
300
300
Complete
Complete
Only
Only
Only
Description
115V,
115V,
115V,
115V,
230V,
25-60
25-60
25-60
25-60
25-60
Hz (NPT)
Hz (NPT)
Hz
Hz
Hz
Motor:
1/2 HP, universal, reversible motor, single
phase, 25-60 Hz, 115V (230V available).
Switch:
Heavy-duty FOR/OFF/REV and Integral
Foot Switch.
Chuck:
RIDGID speed chuck with replaceable
rocker-action jaws.
Spindle Speed:
38 RPM (57 RPM available).
Rear Centering Device: Cam-action turns with chuck.
Support Bar:
Heavy-duty (2).
Part No. Model
Description
Stand for 300 Power Drive
Transporter (for Power Drives & Tristand Vises)
Carriage with No. 312 Lever
Carriage Feed Lever
Oiler w/ 1 gal. of Nu-Clear Thread Cutting Oil
Reamer for No. 311 Carriage with Lever
Cutter for No. 311 Carriage
Universal Q.O. Die Head Only, RH Only
Self-Opening Die Head Only, RH Only
Nipple Chuck Complete, 1/2"-2"
Clip-On Tool Tray
Retrofit Kit (38 rpm)
Retrofit Kit (57 rpm)
Jaw Inserts for Coated Pipe
LH/RH Reamer Cone
Gearhead Motor Grease
42360
42575
68815
42385
10883
42365
42370
97065
97075
51005
42380
97345
97350
97365
46660
41620
Spindle
Speed
RPM
Pipe
Threading
Capacity
38
57
38
57
38
1/8-2
1/8-2
1/8-2
1/8-2
1/8-2
1206
32
311
312
418
341
360
811A
815A
819
1452
304*
304*
—
E-863
—
Rod
Threading
Capacity
1/4-2
1/4-1 1/2
1/4-2
1/4-1 1/2
1/4-1 1/2
Max. Geared
Threader
Capacity
Weight
6"
6"
6"
6"
6"
212 lbs
212 lbs
94 lbs
94 lbs
94 lbs
Other voltages available upon request.
300A Complete consists of 300PD, 1206 Stand, 311A Carriage, 341 Reamer, 360 Cutter, 330 Oil Pan, 811A Die Head with 1/2"-3/4"
and 1"-2" Universal Dies.
Rentals
408
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Model 300 Compact Threading Machine
• Heavy-duty proven performance.
• Lightweight, portable design.
• Fast transport and set-up.
• Self-Contained Oil System with adjustable flow control.
• Versatility for threading and grooving.
• Quiet operation.
• CSA approved.
• Approved to UL standards (NRTLC).
Strut
1/8"-2"
1/4"-2”
1/2 HP, 115V
universal 25-60 Hz
FOR/OFF/REV w/
Integral foot switch.
Hammer-type with
replaceable rocker
action jaw inserts.
Through-the-head with
integral oil reservoir.
Self-priming, constantflow, gerotor pump.
Model 360, roll-type
cutoff, self-centering,
full-floating.
Model 344, 1/8"-2", five
flute cone, RH only.
Consists of:
• #811A Quick-opening die head.
• #344 Reamer.
• #360 Cutter with E-1032 Cutter Wheel.
• 1 Set 1/2" - 3/4" Alloy Universal Dies.
• 1 Set 1"- 2" Alloy Universal Dies
• 1 gallon Nu-Clear thread cutting oil
Part No.
Model
Threaded
Rod
Pipe Capacity:
Bolt Capacity:
Motor:
Switches
Chuck:
Oiling System:
Cutter:
Reamer:
Anchors
FEATURES:
Specifications
Fasteners
Threading Machines
Description
67182 300 Compact Kit
FEATURES:
includes Model 250 Folding Wheel Stand
Model 535 Threading Machine
Tools
Pipe
Hangers
• Large 1.75 gallon oil tray.
• 100% larger chip tray.
• Generous top cover for keeping tools and fi ttings handy.
• High clearance carriage.
• Speed chuck with rocker-action jaws centers and grips work
piece instantly.
• Can be used with geared threaders Models 141 and 161.
• Uses Model 816/817 semiautomatic, Model 815A self-opening
or Model 811A quick-opening die heads.
• Length gauge for quick, accurate cut-off.
• CSA approved.
• Approved to UL standards (NRTLC).
Consists of:
Abrasives
• One (1) No. 811A universal, quick-opening die head.
• One (1) No. 341 reamer.
• One (1) No. 820 cutter.
• One (1) set 1/2"-3/4" universal alloy dies.
• One (1) set 1" - 2" universal alloy dies.
• One (1) gallon stainless steel premium oil.
• Four (4) hex wrenches.
• One (1) spare E-1032 cutter wheel
93287
96497
96502
Model
535
535
535
Description
115V 25-60Hz
1/2"-2" NPT
Machine Only
1/2"-2" NPT
5-flute cone, RH, 1/8"-2".
Self-centering, full-floating.
Two models available:
– (1) Standard. #820 Wheel-Type Cutter,
pipe capacity 1/8"-2", bolt capacity 1/4"-1".
– (2) Optional. #821 Blade-Type cutter,
pipe capacity 1/2"-2". See ordering chart.
Self-priming gerotor oil pump.
RH/LH combination reamer available.
Cutter
Model
RPM
820
820
820
36
36
54
Volts
Weight
115V
115V
115V
260 lbs
245 lbs
260 lbs
Safety
Part No.
Reamer:
Cutters:
Oil Pump:
Machines listed as 1/2"-2" include standard equipment. Machine only includes standard equipment less all die heads and dies. Please
use catalog item numbers. when ordering.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
409
Rentals
Pipe Capacity:
1/8"-2", 2 1/2"-4", 4"-6" with 141 and 161
geared threaders.
Bolt Capacity:
1/4"-2”
Motor:
1/2 HP, single-phase, 115V, 25-60 Hz,
15 Amp reversible universal motor.
Switches
FOR/OFF/REV & Integral safety foot switch.
Chuck:
Speed Chuck™ with replaceable rocker
action jaws.
Rear Centering Device: Cam-action, turns with chuck.
Spindle Speed:
36 RPM standard. 54 RPM model available.
OnSite
Supply
Specifications
Fasteners
Threading Machines
Model 1224 Threading Machine
Anchors
FEATURES:
Strut
• Threads 1/4"-2" pipe at 36 RPM and 2 1/2"-4" at 12 RPM.
• The 1224 threads a wide range of pipe including black, galvanized and plasticcoated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as
rod up to 30 Rockwell C.
• An induction motor insures sound levels well within the limits set by the regulating authorities.
• A special capacitor-start / capacitor-run motor allows the 1224 to thread a full
range of material where voltage drop is experienced.
• 1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered
or straight NPT/NPSM or BSPT/BSPP threads.
• Constant and proper lubrication of dies and workpiece with through-head oiling.
• CSA approved.
• Approved to UL standards (NRTLC).
Specifications
Threaded
Rod
Consists of:
Pipe
Hangers
Tools
• No. 714 (914) 2 1/2"- 4" receding
self-opening die head.
• No. 711 (911) 1/4"- 2" universal self opening die head.
• 1 set 1/2"- 3/4" universal alloy dies.
• 1 set 1" - 2" universal alloy dies.
• 1 set 2 1/2"- 4" 1224 high-speed dies.
• 3 hex keys.
• Spare F-229 cutter wheel.
• 3/4" combination wrench.
• Tool box.
• No. 744 reamer.
• No. 764 cutter
• 1 gallon Nu-Clear thread cutting oil
Pipe Capacity:
1/4"-4", 4"-6" with 161 Geared Threader.
Bolt Capacity:
1/4"-2”
Motor:
1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction type.
Switches
FOR/OFF/REV & Integral foot switch.
Chuck:
Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device: Cam action
Spindle Speed:
36/12 RPM.
Reamer:
Model 744, 1/4"-4" blade-type".
Cutters:
Model 764 full-floating, self-centering 1/4"-4" with F-229
cutter wheel.
Oil Pump:
self-priming gerotor oil pump. Automatic-reversing,
constant-flow
Part No.
Model
Description
Weight
26092
26097
26127
26112
26122
26107
26102
31442
1224
1224
1224
1224
1224
1224
1224
1224
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
509
509
509
509
509
509
526
509
NPT 120V 60 Hz
NPT 240V 60 Hz
BSPT 120V 60 Hz
BSPT 115V 50 Hz
BSPT 240V 60 Hz
BSPT 220V 50 Hz
BSPT GS 220V 50 Hz
NPT 220V 50 Hz
lbs
lbs
lbs
lbs
lbs
lbs
lbs
lbs
Abrasives
OnSite
Supply
Model 100A Universal
Leg & Tray Stand
Model 150A Universal
Wheel & Tray Stand
Safety
• Adjustable to fit 1822, 535, and 1224
Threading Machines.
• Heavy duty steel frame for maximum
stability and rigidity.
• Large dent and corrosion resistant tool
tray for added convenience.
• Adjustable to fit 1822, 535, and 1224
Threading Machines
• Heavy duty steel frame for maximum
stability and rigidity
• Large dent and corrosion resistant tool
tray for added convenience
• Large diameter wheels for easy job-site
transport.
Part No.
Description
Part No.
Description
Model 100A Stand
Optional Steel Cabinet
92462
22563
Model 150A Stand
Optional Steel Cabinet
92457
22563
Rentals
410
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Model 200A Universal
Wheel & Cabinet Stand
• Adjustable to fit 1822, 535, and 1224
Threading Machines.
• 7 ga. steel walls and welded construction.
• 2 internal & 1 external storage shelves.
• Oversized bi-fold door with steel clasp
• Cut-outs for power cord & foot switch storage.
• 2 drain plugs for easy cleaning
• Large diameter wheels for easy job-site
transport.
Part No.
Description
92467
Model 200A Stand
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
The 690 Power Drive is a new lightweight
and powerful hand-held power drive. Designed for
threading 1/8" - 2" pipe with the use of 11-R Die Heads.
It comes equipped with a full set of 11-R Die Heads, 1/2"
- 2", the 691 Support Arm and a durable Carrying Case. The 690
Power Drive is the perfect lightweight and portable power drive for
maintenance and repair workers, as well as service plumbers requiring
2" pipe capacity. Includes case and support arm.
Specifications
Part No. Model
Description
16013
16708
115V 1/2"-2" 25-60 NPT
115V Kit Less Die Heads
690
690
Pipe Capacity:
1/8"-2" pipe.
Bolt Capacity:
1/4"-2”
Motor:
Universal 1020 W, 230 or 115V, 50-60 Hz.
Switches
Heavy-duty paddle switch with safety lock
off device (automatically locks off when
released).Seperate FORWARD/RELEASE
switch.
Gear Head:
Spur gear reduction/face gear drive. All
shafts, ball and needle bearing mounted.
Permanently lubricated gear housing.
Rear Centering Device: Cam action
Spindle Speed:
32 RPM.
Die Heads:
1/2", 3/4", 1”, 1 1/2", 2" (type 11-R).
Support Arm:
No. 691
Die Head Adapter Used with 1/8” through 1 1/4" die heads.
Carrying Case
FEATURES:
Tools
Specifications
Description
Weight
115V 25-60 Hz
230V 25-60 Hz
31 lbs
31 lbs
Manual Pipe Threaders
Model
No.
Exposed Ratchet Threaders:
• Die heads lock into ratchet assembly and are
removed by pulling out ratcheted knob. Includes
ratchet handle.
Enclosed Ratchet Threaders:
• Die heads snap into from either side. Ratchet
knob indicates forward/reverse. Includes ratchet
handle.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Capacity
NPT
Part No.'s
BSPT
NPSM
Weight
—
—
65255
—
65285
—
—
36510
—
—
23-3/4 lbs.
27 lbs.
34-3/4 lbs
42-1/4 lbs
45-1/2 lbs.
65135
65165
36425 16 lbs.
—
20 lbs.
OnSite
Supply
700
700
Exposed Ratchet Threader Sets
12-R
12-R
12-R
12-R
12-R
1/2" - 1-1/4"
1" - 2"
1/2" - 2"
1/4" - 2"
1/8" - 2"
36480
36490
36475
36495
36505
Safety
Model
41935
41940
Abrasives
1/8"-2" Pipe
1/4"-1" Bolt (using 00-RB)
Universal, 1/2 HP, 115V or 230V 25-60 Hz.
Double throw, reversible.
All-spur gear reduction. Spring-loaded adapter pawl. Hardened
steel spindle gear.
32 RPM.
Enclosed Ratchet Threader Sets
11-R
11-R
1/2" - 1-1/4"
1/2" - 1-1/4"
Boston , MA
800-645-6155
36390
36420
Hartford, CT
800-969-0285
411
Rentals
Pipe Capacity:
Bolt Capacity:
Motor:
Switches
Gear Head:
Spindle Speed:
Part No.
Fasteners
Model 700 "PONY" Power Drive
• Heavy-duty hand-held power drive.
• Features reversible 115V or 230V universal motor.
• Capacity 1/8"-2" pipe. Designed for RIDGID No. 12R die heads. Other RIDGID die heads (00R, 00RB, 11R) using
adapters, threading 2-1/2" through 6" with 141/161 geared threaders.
• Approved to UL standards (NRTLC). CSA approved.
Anchors
FEATURES:
Strut
Threaded
Rod
Model 690 Power Drive
Pipe
Hangers
Threading Machines
Fasteners
Die Heads
Die Heads for 2" Threading Machines / Die Head Racks
Anchors
Strut
No. 815A
No. 811A
No. 532
MONO DIE HEAD
No. 816/817
Threaded
Rod
Pipe
Hangers
Tools
Part
No.
Model
No.
Die Head
Description
How
Opened
Thread
Direction
Oil Thru
Head
Dies
Used
Pipe
Cap.
Bolt
Cap.
Weight
lb
97065
97075
84537
84532
23282
10491
97070
97080
23297
97045
97050
42047
42052
42057
42062
42067
42072
42077
42082
42087
811A
815A
816
817
842
555
811A
815A
856
531
532
500A
500A
500A
500A
500A
500A
500A
500A
500A
Universal
Universal
Universal
Universal
Universal
555
British Universal
British Universal
British Universal
Bolt
Bolt
Mono
Mono
Mono
Mono
Mono
Mono
Mono
Mono
Mono
Q.O.
S.O.
S.A.
S.A.
Q.O.
Q.O.
Q.O.
S.O.
S.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
Q.O.
RH
RH
RH
RH
LH
RH
RH
RH
LH
RH/LH
RH/LH
RH
RH
RH
RH
RH
RH
RH
RH
RH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Universal
Universal
Universal
Universal
Universal
Dual/Bolt
Universal
Universal
Universal
500B
500B
Mono
Mono
Mono
Mono
Mono
Mono
Mono
Mono
Mono
1/8 -2
1/8 -2
1/8 -3/4
1 -2
1/8 -2
1/8 -3/4
1/8 -2
1/8 -2
1/8 -2
-
-
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
1/4 -2
1/4 -2
-
-
-
-
1/4 -2
1/4 -2
1/4 -2
1/4 -1
1-1/8 -2
-
-
-
-
-
-
-
-
-
12.5
13
13
13
12-1/2
8
12-1/2
13
12-1/2
7-1/2
9
6-3/4
7
7
7-1/4
7-1/4
8
8
8-1/2
8-1/2
No. 141 / 161 Geared Threaders
FEATURES
Abrasives
OnSite
Supply
• 141 threads 2½", 3", 3½", 4" pipe with one set of dies.
• 161 threads 4", 4½", 5", 6" pipe with one set of dies.
• Jaw clutch prevents jamming.
• Simple adjustment for tapered or straight threads.
• Cam-type workholder sets instantly.
• Fully enclosed gearing.
• Right-hand only.
• Ratchet and handle assemblies sold separately.
Safety
Rentals
412
Part
No.
Model
Description
141
141
161
D-1440
—
NPT with 1 Set High-Speed Dies
BSPT with 1 Set High-Speed Dies)
NPT with 1 Set High-Speed Dies
Carriage Feed Lever
Metal Carrying Case for 141
Hartford, CT
800-969-0285
36620
65380
36630
39380
96725
Boston , MA
800-645-6155
Nominal Pipe Size
Capacity
Washington D.C.
877-419-2755
2-1/2" - 4"
2-1/2" - 4"
4" - 6"
—
Weight
Lbs.
93
93
158
4.3
17
Philadelphia, PA
610-647-8070
(NPT) Nominal Pipe Size - Threads per Inch.
Die Material or Type 1/8-27
1/4–3/8-18 1/2–3/4-14
1–2-11/12
Alloy
RH 47735
Alloy LH*
High-Speed
RH 47755
High-Speed
LH* 39587
H.S. For Stainless RH 47775
H.S. For Cast Iron RH
—
H.S. For PVC RH
—
H.S. For Plastic
Coated Pipe
RH
—
No. 816 / 817
Universal Die Head
(NPSM) Nominal Pipe Size - Threads per Inch.
1/8–27
1/4–3/8-18 1/2–3/4-14 1–2–11-1/2
47740
—
47760
47810
47780
—
—
47745
47795
47765
47815
47785
—
70745
47750
47800
47770
47820
47790
70740
70750
47825
47805
47845
—
—
—
—
47830
-
47850
—
—
—
—
47835
-
47855
—
—
—
—
—
50012
31822
—
—
—
47840
-
47860
70775
—
—
—
—
* Requires left hand model die head
1224 Pipe Dies 2 1/2" - 4"
1224
1224
1224
1224
1224
1224
1224
1224
1224
1224
1224
1224
Capacity
in.
H.S. Dies NPT
2
H.S. Dies BSPT
2
H.S. NPT Dies for Plastic-Coated Pipe 2
H.S. BSPT Dies for Plastic-Coated Pipe 2
H.S. Dies NPT for PVC
2
H.S. Dies BSPT for PVC
2
H.S. Dies NPT for Stainless Steel
2
45° Beveling Dies
2
37 1/2° Beveling Dies
2
Bevel Guide Set
2
37 1/2° Bevel Bit Only
45° Bevel Bit Only
Pump Assembly:
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
1/2-4
—
—
Weight
lb.
2-1/4
2-1/4
2-1/4
2-1/4
2
2
2
2
2
2
—
—
Tools
26192
33642
31827
31832
32237
32242
33057
33072
33077
44992
44997
45002
Description
Abrasives
Model
No.
No. 418 Oiler
• 50% more oil per stroke than other hand-held oilers for longer die life.
• An ergonomic 2-finger trigger design that reduces user fatigue.
• Die cast, heavy-duty body with swivel nozzle with no exposed parts for longer life.
OnSite
Supply
Part
No.
Heavy Duty Reservoir:
• The new 418 oiler features a fastenerless twist and lock drip pan that easily locks in place.
• The new material withstands abrasion, is lighter than metal and does not rust.
• `The new reservoir will not crack, leak or deform over time.
• Integral molded body eliminates leaks at the hose-reservoir connection.
• 50% more oil per stroke than other hand-held oilers for longer die life.
Description
Hand operated oiler complete. Includes 1 gal. thread
cutting oil, reservoir w/removeable chip tray, & 54" hose 20-1/2
Hand operated oiler with attachment for 1 gal. & 5 gal.
containers & 54" hose.
2-1/2
Hand-operated oiler only
1-1/4
Hand-operated oiler with 54" hose & hose fittings
1-1/4
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Wt. Lbs.
Hartford, CT
800-969-0285
Safety
Part No. Model
418
402
#4
#4
Threaded
Rod
No. 811
Universal Die Head
Pipe
Hangers
No. 714
No. 914
413
Rentals
No. 711
No. 911
10883
72342
72332
72327
Fasteners
Strut
Pipe Dies for Use in Universal Die Heads
(No. 504A, 711, 713, 811A, 815A, 816, 817 and 842
Anchors
Die Heads / Dies
Fasteners
Groovers & Cutters
Model 915 Portable Roll Groover
FEATURES:
Anchors
• Easy roll set change out – up to 12" wide capacity range in one unit.
• Cast-in carrying handle – easy to transport or lock up to prevent theft.
• Included ratchet – 90 degree bend-in handle makes grooving easier.
• Available customized tool box – holds 915 groover & all available roll sets.
• Easy to use depth setting gauge – helps make accurate grooves.
Consists of:
• 915 Roll Groover with 2"-6" Sch. 10 (2"-3 1/2" Sch. 40).
• Roll Set Ratchet Wrench
Strut
Specifications
Threaded
Rod
Part No. Model No.
Pipe
Hangers
88232
92437
92447
92442
92452
93497
76827
76822
93642
915
—
—
—
—
—
—
—
—
Capacity:
Operation:
Weight:
1 1/4" - 12" Sch. 10 Steel & Stainless Steel Pipe.
1 1/4" - 6" Sch. 40 Steel & Stainless Steel Pipe.
2"-8" K, L, M, DWV Copper.
1 1/4" - 6" Sch. 40 PVC.
1 1/2", 2 1/2" - 3" Sch. 80 PVC.
Feed screw w/ 1/2" ratchet wrench (included)
23 lbs.
Description
Wt. Lb.
915 Roll Groover with 2" - 6" Sch. 10 (2" - 3 1/2" Sch. 40) Roll Set
Drive & Groove Roll Set for 11/4" - 11/2" Sch. 10 or 40 Steel, Stainless Steel, PVC
Drive & Groove Roll Set for 4" - 6" Sch. 40 Steel, Stainless Steel, PVC
Drive & Groove Roll Set for 8" - 12" Sch. 10 Steel, Stainless Steel, PVC
Drive & Groove Roll Set for 2" - 8" Copper Tube Type K, L, M, and DWV
915 Tool Box
Metric Diameter Tape
English Diameter Tape
Drive & Groove Roll Set 2"-6" Sch. 10 Steel, Stainless Steel, PVC, 2"-3 1/4" Sch. 40 Steel
23
2
4-1/2
4-1/2
2
21-1/2
1/2
1/2
Note: A Roll Groove Set consists of a Groove Roll and a Drive Roll.
Copper Roll Groove Set includes Black Reaction Arm and one Copper Stabilizer Pad.
Tools
Model 916 Portable Roll Groover
FEATURES:
Abrasives
• Specifically designed for field service roll grooving applications.
• Quick and easy mount to RIDGID Nos. 300 Power Drive, 535 or 1822
Threading Machines.
• Cam-type feed actuation – translates into minimum operator effort to
form roll grooves.
• Durable cast-iron housing withstands extensive field use.
• Depth adjustment screw separate from feed mechanism allows for
consistent groove depth.
• Lightweight, only 33 lbs., allows for easy transport and storage.
• Integral feed handle is part of overall unit. No extra tools required.
• Optional Roll Sets for: Copper 2"- 6" (Types K, L, M, DWV), 1" Sch. 10,
40 steel pipe.
• Optional 1¼"-1½" and 2"- 6" AWWA Roll Sets.
• Easy serviceability – drive and groove rolls are easy to change.
OnSite
Supply
Specifications
Safety
Part No. Model No.
Rentals
414
45007
46852
60382
48307
916
916
916
916
Hartford, CT
800-969-0285
Capacity:
Weight:
1 1/4"-6" Sch. 10 steel, stainless steel, PVC.
1 1/4"-3" Sch. 40 steel, stainless steel, PVC
2"-6" Copper (type K, L, M, DWV) optional.
33 lbs.
Description
Roll
Roll
Roll
Roll
Groover
Groover
Groover
Groover
Wt. Lb.
for
for
for
for
300 Power Drive
Copper Tubing for 300 Power Drive
535
1822
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
33
34
33
33
Philadelphia, PA
610-647-8070
Model 918I Roll Groover
Anchors
FEATURES:
2"-6" Schedule 10/40 Roll Set.
8"-12" Schedule 10 (8" Schedule 40) Roll Set.
Tools for Roll Set Changeout.
Carry Case for Roll Sets.
Heavy-Duty Wheel Stand with Tray.
Foot Switch.
1"–12" Stabilizer for Grooving Nipples.
Part No. Model No. Description
Specifications
Pipe Capacity:
Motor:
Motor Control:
RPM:
Weight:
1"-6" Sched. 10 & Sched. 40 Steel Pipe
2"-6" O.D., Copper Tube (Type K, L, M, &
DWV), 1" Sched. 10 & 40.
Universal 1/2 HP, 115v, 60 Hz.
On/Off Heavy-Duty with Foot Switch.
45 RPM. (No Load)
185 lbs.
64977
48405
48407
48417
59992
76827
76822
918I
—
—
—
—
—
—
Roll Grooving Machine, complete, 115V
Roll Set for 8" - 12" Sch. 10 & 40 steel
pipe, with carrying case
Roll Set for 1-1/4" - 1-1/2" Sch. 10 & 40
steel pipe, with carrying case
Roll Set for 2" – 6" Copper Tube
1" - 12" Stabilizer for grooving nipples
Metric Diameter Tape
English Diameter Tape
Pipe
Hangers
Consists of:
Threaded
Rod
Strut
• Capable of grooving 1" to 8" schedule 40 and 1" to 12" schedule 10 pipe faster than any
roll grooving machine in its class.
• Comes standard with a rugged wheel stand, tray is capable of supporting 200 lbs.
• Offers maximum versatility in roll grooving capacities (see specifications below).
• Custom engineered 2-stage, 15-ton hydraulic pump and ram eases grooving and reduces
flare and operator’s fatigue.
• Produces consistent, high quality roll grooves.
• 115V approved by CSA to CSA and UL standards.
• (1)
• (1)
• (1)
• (1)
• (1)
• (1)
• (1)
Fasteners
Groovers & Cutters
Model 975 Portable Roll Groover
Tools
Note: A Roll Set consists of a Groove Roll and a Drive Roll.
FEATURES:
Abrasives
• Two Groovers in one - Performs both machine and manual inplace grooving of 1 ¼” to 6” pipe.
• Auto-tracking feature means pipe will not “walk-off” the groover
• Integral, index depth setting gauge allows fast, reliable set-up.
• 55% higher gear reduction for easier overhead grooving vs.
competition.
• Same rugged durability and groove accuracy as with all RIDGID
groovers
• Integrated, cast-in handle for easy transport.
Specifications
OnSite
Supply
1-1/4” – 6” Sched. 10 & Sched. 40 Steel,
Aluminum, & PVC Pipe; 1-¼” – 6” Sched.
10 & 1-¼” – 2” Sched. 40 Stainless Steel Pipe .
Adjusting screw and integral, index depth
gauge.
Feed screw with 1/2" ratchet wrench or
15/16" (Included) hex wrench.
300 Power Drive 38/57 RPM.
26 lbs.
Safety
Pipe Capacity:
Depth Adjustment:
Actuation:
Power Drive:
Weight:
Part No. Model No. Description
25638
975
Philadelphia, PA
610-647-8070
Combo Roll Groover
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
415
Rentals
Fasteners
Groovers & Cutters
Model 918 Hydraulic Roll Groover
Anchors
FEATURES:
Strut
The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic
ram in a compact, easy to transport unit. With one man set-up and operation, the
918 is the ideal groover for job site requirements. The 918 mounts quickly to RIDGID
300 power drive, 535, 1822, or 1224 Threading Machines. Designed to provide
maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8"
Schedule 40 standard wall pipes. Roll Set changeout is accomplished in seconds.
Specifications
Capacity:
Weight:
1"-12" Schedule 10 steel, stainless steel, PVC.
1"-8" Schedule 40 steel, PVC.
1"-2" Schedule 40 stainless steel.
2"-6" Copper (Types K, L, M, DWV).
2 1/2"-6" Schedule 80 PVC.
81 lbs.
Threaded
Rod
Part No. Model No. Description
48297
48377
48382
48387
47222
918-1
918-2
918-4
918-5
918 Only
918
918
918
918
918
Roll
Roll
Roll
Roll
Roll
Groover
Groover
Groover
Groover
Groover
Wt. Lb.
w/300 Power Drive Mount Kit
w/1822 Power Drive Mount Kit
w/1224 Carriage Mount Kit
w/535 Carriage Mount Kit
Only
104
134
131
117
95
Pipe
Hangers
Model 920 Portable Roll Groover
FEATURES:
Tools
• Largest grooving capacity in its class.
• Transportation Mode – Detachable Wheels enable one man to easily move the 920 around a jobsite. Also available is a Model No. 32
Transporter.
• Patented Depth Setting Gauge – Easy and accurate groove depth setting does not require adjusting the protective guarding.
• Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to
control flare and optimize groove time.
• Front Roll Set Change-Out – User can switch groove roll sets quickly
and easily.
• Easy Adjust Support Legs – Helpful when leveling the groover on uneven ground.
Abrasives
Consists of:
OnSite
Supply
• 920 Roll Groover with support legs.
• 2"- 6" Sch. 10/40 Groove Roll Set with box.
• 8"-12" Sch. 10/40 Groove Roll Set.
• 14"-16" Standard Wall (0.375) Groove Roll Set with box.
• 920 Training Video and User Manual.
• Transport wheels
Part No. Model No.
Safety
Rentals
95782
96987
96992
96997
96982
96372
76827
76822
42575
416
920
—
—
—
—
RJ6264
—
—
32
Description
Wt. Lb.
920 Roll Groover with 2"- 6" Sch. 40, 8"-12" Sch. 40 and 14"-16" Std. Wall Roll Sets
Drive and Groove Roll Set for 18" - 20" Sch. 10 Steel or Stainless Steel
Drive and Groove Roll Set for 22" - 24" Sch. 10 Steel or Stainless Steel
Drive and Groove Roll Set for 4" - 6" Sch. 40 Steel or Stainless Steel
Drive and Groove Roll Set for 2" - 8" Copper Tube Type K, L, M, and DMV
RJ624 Large Diameter Pipe Stand
Metric Diameter Tape
English Diameter Tape
Transporter for Power Drives and Tristand Vises
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
33
34
33
33
33
34
33
33
33
Philadelphia, PA
610-647-8070
RGCOMBO2 Hydraulic Roll Groover
Anchors
Hinged Cutters
Fasteners
Hinged Pipe Cutters / Roll Groover
Threaded
Rod
Strut
(1” – 12”)
H2-1/2S*
H2-1/2I*
H2-1/2X*
H4S**
H4I*
H4X*
H6S
H6I
H6X
H8S
H8I
H8X
H8XX
H12S
H12I
H12X
H12XX
03110
03112
03114
03120
03122
03124
03130
03132
03134
03140
03142
03144
03146
03150
03152
03154
03156
1"
1"
1"
2"
2"
2"
4"
4"
4"
6"
6"
6"
6"
8"
8"
8"
8"
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2-1/2"
2-1/2"
2-1/2"
4"
4"
4"
6"
6"
6"
8"
8"
8"
8"
12"
12"
12"
12"
Length
inches
Wt.
lbs.
17
17
17
22
22
22
28
28
28
32
32
32
32
34
34
34
34
8
8
8
14
14
14
22
22
22
28
28
28
28
39
39
39
39
* Exclusive
Note: S = comes with wheels for steel; I = for cast and ductile
iron; X = for schedule 80 steel; XX = for schedule 100 steel.
Wheels for same size cutters are interchangeable. Recommend
only Reed cutter wheels be used with these hinged cutters. Reed
wheels are made from high shock-resistant tool steel and then
precisely heat treated.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Tools
Pipe Capacity
Nominal Size
Pipe Capacities
RGCOMBO2:
1-1/4” - 6” Sch. 40 for steel, stainless steel
and aluminum pipe.
RGCOMBO812:
8” - 12” Steel, Stainless Steel and
aluminum pipe up to 0.188" wall
Part
No.
Item
Code
Abrasives
Model
No.
Material
RGCOMBO2
09200 1-1/4" - 6" Steel, Stainless Steel,
Aluminum
RGCOMBO812 09210 8" - 12" Steel, Stainless Steel,
Aluminum up to 0.188" wall
OnSite
Supply
Part
No.
RGCOMBO812 roll groover forms standard rolled grooves in 8”
- 12” steel, stainless steel, and aluminum pipe up to 0.188” wall
thickness. The formed grooves comply with the specifications
required for mechanical coupling systems. The only adjustment
required is for the depth of the groove. The RGCOMBO812
is the only combo roll groover that will groove 8” - 12” pipe.
Competitive tools in this size range are either hydraulic or
manual power, not 2-in-1.
Steel Pipe Cutter (4-Wheel With Guides)
Spring tensioned guide bars
provide square alignment
for four wheel cutters. Short
handle for close quarter
work.
• 2RBS Wheel*
Part
No.
Model
No. Description
2-4WG 03338 Steel Pipe Cutter
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Pipe Capacity
Nominal Size
Wt.
lbs.
1/2" –2"
7.3
417
Safety
There is no shower of sparks in this cold cut. This is the
only hinged cutter that tracks every time and the only one
recommend for ductile iron, steel, and stainless steel to
Schedule 100.
RGCOMBO2 roll groover forms standard rolled grooves in steel,
stainless steel, and aluminum pipe from 1 1/4” to 6”. The formed
grooves comply with the specifications required for mechanical
coupling systems. The only adjustment required is for the depth
of the groove.
Rentals
Four wheels cut steel, stainless steel, cast and ductile iron
with only 90° to 110° handle swing. Only 4” clearance
required around pipe. Strong guide fingers ensure perfect
alignment for square cuts. A closed 360° frame forces all
energy into cutting the pipe for maximum efficiency.
Pipe
Hangers
RGCOMBO2 Portable Roll Groover
Fasteners
Pipe Cutters / PipeReamers
Model 258 & 258XL Power Pipe Cutter
Anchors
FEATURES:
• Square cut 21' or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.
Model 258
Strut
Consists of:
• (1)
• (1)
• (1)
• (2)
RIDGID 774 Square Drive Adapter.
8 1/2" HD Cutter Wheel Assembly.
Hydraulic Ram and Foot Pump.
2 1/2" to 12" Ball Transfer Pipe Support
Specifications
Threaded
Rod
Pipe
Hangers
Model 258 XL
Cutting Capacity:
Depth Adjustment:
Actuation:
Power Drive:
Weight:
Model 258: 2-1/2" to 8" schedule.
10*/40 steel pipe
Model 258XL: 8" to 12" schedule.
10*/40 steel pipe
Adjusting screw w/integral depth
setting gauge.
Feed screw with 1/2" ratchet
wrench or 15/16" (Included) hex
wrench.
700 Power Drive 33 RPM. (no load)
Model 258: 105 lbs. Model 258XL: 140 lbs.
Part No. Model No. Description
Tools
50767
58227
50812
58222
54397
60002
60007
61757
258
258-XL
—
—
—
258PS
—
—
Wt. Lb.
105
2 1/2"-8" Pipe Cutter
8"-12" Pipe Cutter
140
2
8-1/2" HD Cutter Wheel Only
8-1/2" Thin Wall Cutter Wheel Only
2
24
Transport Cart
7
Pipe Support 2 1/2"-12"
Replacement Ball Transfer Head set
5.5
Pipe Roller for Beveling (Model 258 only) 7
Pipe Reamers
Abrasives
Pipe Reamers
OnSite
Supply
• No. 2-S Spiral Ratchet Reamer – Selffeeding spiral design for extra-fast and
easy hand reaming. Model 2S Reamer
is not suitable for power drive reaming.
• Nos. 2 and 3 Ratchet Reamers – Long
taper design will not dig in. Suitable for
use with power drives.
• No. 254 Spiral Ratchet Reamer – Hollow
center reduces weight. Large pressure plate.
Hardened alloy steel cone removable for
sharpening.
Safety
Part
No.
Model
No.
Description
Capacity
in.
Weight
lb.
Replacement
Cone
34955
34945
34950
34960
2-S
2
3
254
Spiral Reamer
Straight Reamer
Straight Reamer
Spiral Reamer
1/4 – 2
1/8 – 2
3/8 – 3
2-1/2 – 4
7-1/4
7
11-1/2
14
35020
34975
35090
35135
Rentals
418
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Nos. 1-A & 2-A
Fasteners
Pipe Cutters / Benders
Part
No.
Model
No.
Description
Pipe Capacity
Nominal Size
23493 PC-1375 Single Stroke Plastic Pipe 1/8" –1-3/8"
& Tubing Cutter
25588 PCB-1375 PC-1375 Replacement Blade
• Fast, clean pipe cutting by hand or power.
• Extra-long shank protects adjustment threads, while an extralarge handle is provided for quick, easy adjustment.
• Can be converted to 3-wheel cutter by replacing rollers with
cutter wheel, or the 2A and 4S can be ordered as 3-wheel
model for use in areas where a complete turn is not possible.
Part
No.
Model
No. Description
32810
32920
32825
32830
32840
32845
32850
1-A
2-A
2-A
3-S
4-S
4-S
6-S
Pipe Capacity
Nominal Size
Wt.
lbs.
Heavy-Duty
1/8" –1-1/4"
3-Wheel Hvy Duty
1/8"–2"
Heavy-Duty
1/8"–2"
Heavy-Duty
1"–3"
Heavy-Duty
2"–4"
3-Wheel Hvy Duty
2"–4"
Heavy-Duty
4"–6"
6.5
7
7
15
18
18
22
Tools
No. 138
Threaded
Rod
• Patent pending, X-CEL blade for fast single stroke cutting.
• Durable aluminum construction for heavy duty use.
• Extra large 1.375" O.D. capacity.
• Easy turn-thumb latch for reliable storage.
• Replaceable, hardened steel cutting blade.
• Spring-loaded handles provide instant adjustment to any pipe size.
• Burrless cutting operation provides a square cut.
Heavy Duty Pipe Cutters
Pipe
Hangers
PC-1375 Plastic Pipe & Tubing Cutter
Strut
Nos. 3-SA & 4-S & 6-S
No. 206
Nos. BK-100S & BK-125D
No. 226
• Easy-to-use tools that can cut most grades of plastic and rubber
pipe and tubing, including Sch. 40 PVC.
• Spring loaded handles provide instant adjustment to proper pipe size.
• “Burr-less” cutting operation provides a square cut.
• Replaceable stainless steel cutting blade folds into handle for
safe handling and carrying.
• Do not use to cut plastic-coated metallic tubing or pipe.
138
1493
BK-100S
BK-125S
1/8" –1-1/2"
Plastic Pipe Cutter
Plastic Pipe Cutter
1/8"–2"
Plastic Pipe Scissors Cutter
1/8"–2"
1-1/4" Plastic Pipe Scissors Cutter 1"–3"
300 Series Lever Benders
Designed to bend copper tubing to
a maximum of 180°. Offset cushion
grip handles and a 90° start angle,
together with a specially engineered
plastic shoe, combine to ease bending effort. 300 series lever benders
form smooth bends in types K & L
soft (annealed) copper tubing.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
No. 276
Pipe Capacity
Nominal Size
Soil Pipe Cutters
• Cuts 1-1/2"– 6" No Hub® soil pipe.
• Lighter weight and closer spacing of cutter wheels, together with
simple ratcheting action, give smooth cut on lighter wall pipe.
• Ratchet-action handle parallel to pipe allows for application in
trenches of minimum width.
• Complete with hand guard to protect operator’s knuckles when cutting.
Part
No.
68650
69982
32900
73847
74207
Boston , MA
800-645-6155
Model
No.
206
226
246
276
228
Description
Pipe Capacity
Nominal Size
Soil Pipe Cutter No Hub
In-Place Soil Pipe Cutter
Soil Pipe Cutter
Soil Pipe Cutter
Soil Pipe Assembly Tool
Hartford, CT
800-969-0285
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
–
–
–
–
–
6"
6"
6"
6"
8"
419
OnSite
Supply
91125
12831
73842
73847
Description
Safety
Model
No.
No. 246
Rentals
Part
No.
Abrasives
BK-100S & BK-125S Scissor Cutters
Fasteners
Tubing Cutters
Quick Acting Tubing Cutters with NEW X-CEL Features
Anchors
• Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces
and thrust bearing slide assemblies for smooth operation.
• All Models now include an X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
• These cutters are available in models for plastic pipe or metallic tubing.
• Models 151 and 152 feature fold-away reamers.
Strut
Part No. Model No.
Threaded
Rod
31632
31637
31642
31647
34572
36597
36592
31652
36562
31667
151
151-P
152
152-P
153
153-P
154
154-P
156
156-P
Description
Quick-Acting Cutter
Above w/Wheel For Plastic*
Quick-Acting Cutter
Above w/Wheel For Plastic*
Quick-Acting Cutter
Above w/Wheel For Plastic*
Quick-Acting Cutter
Above w/Wheel For Plastic*
Quick-Acting Cutter
Above w/Wheel For Plastic*
Std. Wheel
Capacity
Wt. Lb.
E-3469
E-2155
E-3469
E-2155
E-5272
E-3469
E-2155
E-2558
E-2558
E-2157
1/4" – 1 5/8"
1/8" - 1"-1/4"**
1/4" – 2-5/8"
1/4" – 2"**
1-1/4" – 3-1/2"
1" – 3"**
1-7/8" – 4-1/2"
1-1/2 – 4"**
4" – 6-5/8"
4" – 6"**
7/8
7/8
1-7/8
1-7/8
2
2
3
3
4
4
* Plastic models include spare cutting wheels for cutting copper
**Nominal Plastic Pipe Size
Pipe
Hangers
Midget Close Quarters Tubing Cutters Nos. 101, 103, 104, 117 & 118
• Specifically designed for use in restricted spaces on small diameter, hard and soft copper,
aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts.
• Strong, lightweight slide & wheel housing, large knurled feed screw knob.
• The Model 117 & 118 include a self-feeding cutter wheel that automatically cuts after tightening the knob only once.
• The Model 117 features a special knob for easier tightening of the feedscrew.
Tools
Part No. Model No.
Abrasives
40617
32975
32985
97787
86127
101
103
104
117
118
Description
Close
Close
Close
Close
Close
Quarters
Quarters
Quarters
Quarters
Quarters
Cutter*
Cutter
Cutter
Quick-Feed Cutter
Quick-Feed Cutter*
Std. Wheel
Capacity
Wt. Lb.
E-3469
E-3469
E-3469
E-3469
E-3469
1/4" – 1-1/8"
1/8" – 5/8"
3/16" – 5/16"
3/16" – 5/16"
1/4" – 1-1/8"
1/4
1/6
1/4
1/4
1/4
* Models 101 and 118 include spare cutter wheel in knob
Midget Tubing & Conduit Cutters Nos. 10, 15, 20 & 30 with NEW X-CEL Features
OnSite
Supply
• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit.
• Now includes X-CEL Knob for quicker cutting.
• Nos. 10, 15 and 20 feature a convenient fold-away reamer.
• No. 30 is rated for larger diameter steel and stainless steel tubing.
• No. 15-SI is especially designed for stainless steel tubing. Includes special roller bearings and
cutter wheel to make stainless cutting easier.
Part No. Model No.
Safety
32910
32915
32920
32925
32930
32935
32940
32950
97212
Rentals
420
10
10
15
15
20
20
30
30
15-SI
Description
Screw Feed Cutter
Above w/H-D Wheel
Screw Feed Cutter
Above w/H-D Wheel
Screw Feed Cutter
Above w/H-D Wheel
Screw Feed Cutter
Above w/H-D Wheel
Screw Feed Cutter
Hartford, CT
800-969-0285
Std. Wheel
Capacity
Wt. Lb.
F-158
E-1240
F-158
E-1240
F-158
E-1240
E-2558
E-2191
E-1525
1/8" – 1"
1/8" – 1"
3/16" – 1-1/8"
3/16" – 1-1/8"
5/8" – 2-1/8"
5/8" – 2-1/8"
1" – 3-1/8"
1" – 3-1/8"
3/16" – 1-1/8"
7/8
7/8
1-1/4
1-1/4
1-3/4
1-3/4
3-1/2
3-1/2
1-1/3
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
421
Fasteners
Rentals
Safety
OnSite
Supply
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
Strut
Anchors
Pipe Cutters / Tubing Cutters / & Cutter Wheels
Fasteners
Hole Cutting Tools / Shears
Model HC-300 Hole Cutting Tool
FEATURES:
Anchors
Strut
• Quick Connecting Two-piece Design. This unique design allows for easy
mounting, transport and set up. In addition, weighing only 31 lbs., the unit
can be broken down into two lighter weight units for maximum transport
and operation comfort. This is particularly useful when working off a ladder or overhead.
• Single-hand Chain Latching. The Model HC300 features a patented springloaded chain that saves time and significantly aids set up and operation.
• Ergonomic Design. With all controls at the operator’s fingertips, the tool
has been designed for maximum productivity.
• High Speed. With a powerful 1.2HP, 11 amp motor, the Model HC300
delivers 360 RPM to quickly bore holes while optimizing hole saw life.
• Horizontal and vertical flats to ensure perpendicular cutting.
Consists of:
• (1) Hole Cutting Tool (Base and Motor Assembly).
• (1) Chuck Key
Threaded
Rod
Specifications
Part No. Model No.
Pipe
Hangers
76777
HC-300
Description
3" Hole Cutting Tool 115V
Note: The HC300 is not a hot tapping tool.
Motor:
Universal, 110V or 230V
25-60Hz 11 amp, 1.2 HP,
UL/CSA listed.
Motor:
360 RPM (No Load)
Hole Cutting
Capacity:
up to 3"
Chuck Size:
1/16" – 1/2"
Pipe Diameter
Mounting Range: 1-1/2" – 8"
Weight:
31 lbs.
Model HC-300
Hole Cutting Tool
Hole Cutting Base
RS1C
Tools
Hole Master™
Hole Cutting Base
Abrasives
WHY REED?
Features
lightweight
aluminum castings
with built-in
handles.
OnSite
Supply
The Hole Master™ (HCB) provides
a means of clamping onto pipe and
using a drill* to cut a hole in the
pipe. The Hole Master comes with a
base, chain and screw for clamping,
along with a plate and drill holder for
mounting a drill and hole saw to the
unit. The handle and gear provide
leverage for cutting holes in pipe.
The Hole Master has a pipe diameter
mounting range of 1-1/4” - 10” (42 273 mm). The Hole Master requires
a hole saw or bit (sold separately).
Use the Hole Master in depressurized
piping systems only.
Shown with drill
and hole saw
which are sold
separately.
RS2C
Clean Room Ratchet Shears
The Reed RS1C and RS2C ratchet shears
offer good mechanical advantage and
smooth, easy operation. Unpainted natural
finish and food-grade lubricants assure
no paint chips or out gassing. Blades are
resharpenable and replaceable.
Safety
Part
No.
Part No. Model No.
L X W X Th
Description
HCB-475M 08441
HCB-475D 08442
13" x 12" x 5"
13" x 12" x 5"
Fits up to 4-3/4" dia. hole saw
Fits up to 4-3/4" dia. hole saw
• 08441 HCB-475M fits Milwaukee 1660-1 and 1660-6 1/2” Compact Drill
• 88442 HCB-475D fits DeWalt® DW131 Spade Handle Drill
®
Rentals
422
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Model
No.
Cap.
Len.
RS1C 04676
RS2C 04677
1.7"
2.4"
8.3" 1.0 lbs.
17.0" 2.5 lbs.
Part
Model
RS1B 94175
RS2B 94175
Washington D.C.
877-419-2755
Wt.
Re[placement Blade
RS1C Blade
RS1C Blade
Philadelphia, PA
610-647-8070
RT1000 Tapping Tool
FEATURES:
Note: Cutters are not included.
Note: The RT1000 uses the same drills and hole saws as the
RT3422 and the MLT3401 saddle tapping tool. The RT1000’s
maximum capacity is 1".
Tapping Capacity: 3/4" – 1"
Mounting:
Saddle, Welded Nipple, Weld-o-let®,
Thread-o-let®
Activation:
Hand Ratchet, Air Ratchet, Right
Angle Drill
Cutter Field:
Rotation of sleeve around an acme
threading barrel
Pressure:
Water, 150 psig @ 100°F, Steam,
Air, 100 psig @ 370°F
83567
83302
83307
76022
83317
83322
83337
83347
83327
83572
RT1000
RT1000
—
—
—
—
—
—
—
—
FEATURES:
Wt. Lb.
RT1000 Tapping Tool CTS Set
RT1000 Tapping Tool Only
RT 1000 Tool Box
Ratchet Wrench
3/4" CTS Adapter
1" CTS Adapter
3/4" NPTM Adapter
1" NPTM Adapter
3/4" Mueller® 110 Compression Adapter
1" Mueller 110 Compression Adapter
16
6
7
2
0.3
0.3
0.3
0.3
0.3
0.3
RT3422 Tapping Tool
Abrasives
• Heavy-Duty Design. .
• Built-in bleed valve. Allows for easy purge of chips.
• Independent cutter feed gives the operator total independent
control of the cutter feed rotation for optimal saw life.
• Capable of tapping into steel, cast iron, ductile iron and plastic
pipe.
• Versatility. The RT3422 is capable of tapping mains of:
– Water up to 500 psig.
– Steam, air and natural gas up to 150 psig.
• Coupon retaining bits. Exclusive pilot bits give you the confidence that the coupon will not be dropped in the pipe, preventing medium contamination or possible damage of downstream
equipment.
The RT3422 sets include RT3422 tapping tool with bleed valve,
shaft extensions, heavyduty hole saw arbors, 1/4" and 3/8" coupon
retaining pilot bits, ratchet wrench, (2) spud wrenches, and 5
valve adapters in a steel tool box. Cutters are available separately
Part No. Model No. Description
75982
75992
91192
76017
76022
RT3422
RT3422
RT3422
—
—
Philadelphia, PA
610-647-8070
Tapping Machine Only
3/4" - 2" NPT Set (Male)
3/4" - 2" CTS Set (Flared)
Tool Box
11/16" Wrench
Washington D.C.
877-419-2755
OnSite
Supply
Consists of:
Specifications
Wt. Lb.
18
30
30
7
Boston , MA
800-645-6155
Tapping Capacity: 3/4" – 2"
Mounting:
Saddle, Welded Nipple, Weld-o-let®,
Thread-o-let®
Activation:
Hand Ratchet, Air Ratchet, Right
Angle Drill
Cutter Travel:
14"
Cutter Field:
Rotation of sleeve around an acme
threading barrel
Pressure:
Water, 500 psig @ 100°F Steam,
Air, and Natural Gas, 150 psig @
370°F
Hartford, CT
800-969-0285
423
Safety
Part No. Model No. Description
Rentals
Specifications
Pipe
Hangers
RT1000 Tapping Tool, 3/4", 1" CTS Corporation Adapter, Small
Shaft Extension, Small Saw Arbor, 1/4" Pilot Bit, Ratchet Wrench,
(2) Spud Wrenches, Tool Box.
Tools
Consists of:
Threaded
Rod
Strut
Anchors
• Compact and lightweight, the tool is great for tight quarters and
awkward locations.
• Sturdy machined construction and corrosion-resistant materials
combine to provide dependable lifelong operation.
• Independent cutter feed mechanism gives the operator full control of drilling to optimize cutter performance and service life.
• Taps steel, cast iron, ductile iron and plastic pipe.
• Coupon retaining bits give you the confidence that the coupon will
not be dropped in the pipe, preventing medium contamination or
possible damage of downstream equipment.
Fasteners
Tapping Tools
Fasteners
Tristand Vises
No. 460 Portable Tristand Vises
Anchors
Model 460 Tri-Stand Chain Vise
Complete with slots for Hanging Tools, Pipe Rest, Three Pipe
Benders and Ceiling Brace Screw
Strut
• Integral legs and tray fold in for easy carrying and set-up
• Large vise base overhangs front legs for clear tool swing
• 40% larger work surface, increased pipe capacity
• 6” wider, rear support and receding ceiling brace screw
Threaded
Rod
Part
No.
Model
Pipe Capacity
Weight
No.
Description
in
mm
lb kg
Portable TriStand Chain Vise
1/8-6
3-150
47 21.0
72037 460
No. 425 Portable Tristand Vise
Pipe
Hangers
Model 425 Tri-Stand Chain Vise
Integral legs and tray fold in for easy carrying and setup. Large
vise base overhangs front legs for clear tool swing.
Tools
• Complete with slots for hanging tools, pipe rest, three-pipe benders,
and ceiling brace screw.
• Features “quick grab”, self-locking latch and carrying handle for
ease of transport
• 6” wider, rear support and receding ceiling brace screw
Part
Abrasives
No.
Model
No.
Description
16703 425
Pipe Capacity
Portable TriStand Chain Vise
Weight
in
mm
lb kg
1/8-2 1/2
3-60
48.5 22
No. R450+ Series TriStand
Model R450+ TriStand Tripod Vise
OnSite
Supply
Reed Tripod vises remain the sturdiest on the market. Tripods are manufactured with the heaviest gauge steel, overlapping hinges, and the best
adjutable tray clamp, not a set screw, to keep the lower tray assembly and
entire portable workbench tight—even after many hours of use! The heavyduty design permits use with pipe up to 6” in diameter. Tripod fold into a
compact shape, has a padded handle grip, and boast the lightest weight for
the easiest portability of all well-known Tripods
Safety
Part
No.
Model
Pipe Capacity
Weight
No.
Description
in
lb kg
02306 R450+
Rentals
424
Hartford, CT
800-969-0285
Portable TriStand Chain Vise
Boston , MA
800-645-6155
1/8-6
Washington D.C.
877-419-2755
mm
10-178 36.3 16.5
Philadelphia, PA
610-647-8070
No. AR-99
No. RJ-98 / 99
Fasteners
Tools
Pipe
Hangers
No. VJ-98 / 99
Threaded
Rod
Strut
A full range of Heavy-Duty Adjustable Pipe Stands are available in varying configurations with capacity
from 1/8" – 36"; suitable for use with Threading Machines, Roll Groovers, etc.
Anchors
Pipe Stands
Part No. Model No.
56657
56662
37997
56667
56672
56682
42505
42510
83380
64642
96372
VJ-98
VJ-99
BTH-9
RJ-98
RJ-99
CJ-99
46
92
965
AR-99
RJ-624
Philadelphia, PA
610-647-8070
Description
V Head Low Pipe Stand
V Head High Pipe Stand
Ball Transfer Head F/VJ
Roller Head Low Pipe Stand
Roller Head High Pipe Stand
Conveyor Head High Stand
Adjustable Pipe Support
Adjustable Pipe Support
Support Stand for Groovers
Adj. Roller Stand with steel wheels
Large Diameter Pipe Stand
Washington D.C.
877-419-2755
Abrasives
No. RJ-624
Height Adj.
Max. Pipe Cap.
Wt. Capacity
Wt. Lb.
20" – 38"
28" – 52"
—
23" – 41"
32" – 55"
29" – 44"
23" – 33"
32" – 41"
26" – 42"
—
16" – 31"
12"
12"
12"
12"
12"
12"
6"
6"
12"
36"
24"
2500
2500
1000
2500
2500
2500
2500
2500
2500
2500
4500
21
23
5
24
27
19
23
28
29
30
167
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
425
OnSite
Supply
No. BTH-9
No. CJ-99
Safety
No. 965
Rentals
No. 92
Fasteners
Jack Stands
Jack Stands
Two Models of Jack Stands to Suit your Welding Needs ...
Anchors
Heavy Duty
The Original Jack
Stand!
Maximum
47”
Strut
The first commercially
produced jack stand
constructed out of rugged
1” steel tubing, tested
by dependent labs for
excessive loads.
Hi Jacks
For perfect work height
on shapes or pipe 24” in
diameter or smaller
Maximum
35”
Threaded
Rod
Pro Jack
Uses the same head
styles as Heavy Duty
Jack but the tri-stand
legs are made out of
formed steel to suit all
budgets.
Maximum
35”
Lo Jacks
Pipe
Hangers
Maximum
20”
For larger shapes
or pipe over 24” in
diameter
Tools
…Plus A Choice of 6 Head Styles for Every Application
Abrasives
Model
Vee-Head
Ball Transfer
Head
Steel Wheel
Head
Rubber Wheel Bar Stock
Head
Head
Pipe Stand
Head
Capacity
2,000 lb
1,000 lb
2,000 lb
1,000 lb
1,000 lb
2,000 lb
1/8" - 48"
3/8" - 24"
1/2" - 24"
1/2" - 24"
1/8" - 10" (Flat)
3/8" - 10"
Safety
General welding of
pipe shapes,
solids and rounds
For rotation of
pipe or tubing in
all directions
Roll Welding of
pipe and rounds
Non-marring
surface, roll
welding of pipes
Machining flats and
shapes min max
heights:
and rounds
Supports pipe for
threading and
grooving machines
Hi Pro 28 - 40-1/2
Lo Pro 28 - 22-35
Hi HD 29 - 43-1/2
Lo HD 21 - 29
Hi FAJ 29-1/2 - 43-1/2
Lo FAJ 21-3/4 - 29-1/4
Available in
Stainless Steel
Yes
No
Yes
No
Yes
No
Rentals
426
OnSite
Supply
Pipe Size
Application
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Grasshopper
Cricket
Texas Pipe Dolly
More than a Pipe Buddy!
• Fits through 35” openings
• Enables one man to move up to 2,000 pounds
• Special sliding chain block design accommodates long & short loads
• Carries up to 20” diameter pipe toolboxes - fittings and valves
• Chains can be used to lock wheels and tries for security
• Rugged high-pressure tires and wheels allow construction-site mobility
Fasteners
Strut
• Transport 20 foot pipe lengths up to 1,000 pounds
• Ideal job-site material and job-site carrier
• Comes with ratchet hold down strap and 16” tube tires
• Quick handle disconnect for compact storage
• Uses leverage to lift pipe
• Great for flanges - fittings
and valves
Anchors
Pipe Handling Equipment
Part No.
Description
Weight
782699
Cricket
70 lbs.
W
H.
2,000# 20"
L.
20"
40"
Wt.
W
H
36"
40"
Part No.
Description
L
780351
ST-401 Grasshopper 165 lbs. 12'
Threaded
Rod
Load Capacity
Wt.
• Quick installing pins works as convenient reference points to
level flange for tack and weld-out - no tools needed
• Hardened tapered pins automatically center on 5/8” to 1-5/8”
holes
• Features Acme threads for maximum clamping power and
hardened tool steel for long lasting uçse
Part No.
Description
Weight
780420
ST-104 Adjust-A-Fit
11 lbs.
Part No.
Description
Weight
Adjust-A-Rolls®
780430
780429
ST-106 Flange Pins
ST-206 SS Flange Pins
4 lbs.
4 lbs.
Adjust-A-Flange®
Perfect pipe fabrication stand for job or shop use
• Roller adjustment from either side
• Clean and simple design avoids welder interference
• Wheels trued for true pipe rotation
• Handle large enough to work with gloved hand
Handles loads up to 1,000
pounds
Level…
Layout…
Fit-Up…
Tack…
Roll-Out…
All In One Step!
Part No.
Description
Weight
780425
ST-105 Adjust-A-Flange
11 lbs.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
427
Rentals
Safety
• Fits all flanges for 5” pipe and larger with
bolt holes 3/4” to 1-1/58”
• Used in combination with the AdjustA-Fit® to bring pipe flanges to exact
plumb for tack and weld out
• Eliminate 75% of the hard work in
pipe fitting when used with the AdjustA-Fit® and Roust-A-Bout®
• Flange nuts serve as convenient
reference points to check level
Tools
For Accurate Alignment of Pipe Flanges
Abrasives
Flange Pins
• Makes lining up fittings
a trouble free - one man
operation
• Uses gravity to bring fittings
to exact plumb or any angle
up to 45°
• Threaded shaft assembly is hardened for long tool life
• Cloverleaf setscrew and threaded shaft handle work from either side
OnSite
Supply
Fastens directly onto
fittings for loads up to
1,000 lbs
Pipe
Hangers
Adjust-A-Fit®
Fasteners
Material Lifts
Series 2100 Contractor Lifts
Anchors
Great all around Contractor Lift!
Strut
• 12', 18' & 24' heights
• 650 lb capacity
• Rolls through standard doorways & tail gates
• Loading Bar - great for overhead cranes
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed - no loose parts
• Variety of attachments
• Large 7/32" load cable
• Lockable, 5" polyurethane casters
• Load cable feeds inside mast (no more exposed cable just inches away from operator's face)
This compact lift offers stronger mast design and a superior cabling system. The shorter
mast sections allow the 2000 to travel through doorways without tipping and to fit nicely
into vehicles with small storage space.
Threaded
Rod
Base Unit is NOT Recommended for Lifting Pipe unless used with
Optional Boom Carriage (P/N 783642)
2100 Options:
1.Cable Safety Brake
Pipe
Hangers
Each mast and carriage can have a factory installed, gravity
actuated safety brake which holds loads in place in the event the
cable should go slack
2.Fork Extensions (No. 783535 )
Tools
With the push of a button, forks may be extended from 28" to
42". With longer forks, the weight capacity decreases to 200 lb.
and is clearly shown on the forks when extended. A second button returns the extension for convenient storage inside the forks
3.Boom Carriage (No. 783642 )
Ideal for installing pipe or lifting “from the top” applications.
Uses four attaching plunger pins and has a 40" reach. Hook has
five locations and load capacity decreases the farther out the
boom is extended (from 650 lb. to 200 lb.)
2112
2118
2124
- See Below
Series 2100 Contractor Lift Specifications
2112
2118
2124
Height - stowed
Dimensions
84"
84"
84"
Length - stowed
34"
34"
34"
Height - operating
84"
84"
84"
Length - operating
62"
73"
73"
Abrasives
31.25"
31.25"
31.25"
Width with stabilizer legs
Base width
74"
74"
74"
Ground clearance
2.5"
2.5"
2.5"
6"
6"
6"
Load height (minimum)
Maximum height (forks down)
11’1"
16’6"
21’11"
Maximum height (forks up)
13’1"
18’6"
23’11"
Standard Fork width
21.5"
21.5"
21.5"
Standard Fork length
28.0"
28.0"
28.0"
252 lb
321 lb
366 lb
OnSite
Supply
Weight
Net weight
Load Capacity
Load capacity, 14" load center
650 lb
650 lb
650 lb
Load capacity, with fork extensions
200 lb
200 lb
200 lb
Standard fork width
21.5"
21.5"
21.5"
Standard fork length
28"
28"
28"
Fork Specifications
Safety
Fork length with extensions
Rentals
428
Hartford, CT
800-969-0285
42"
42"
42"
Fork weight
32 lb
32 lb
32 lb
Fork weight with extensions
38 lb
38 lb
38 lb
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Roust-A-Bout
Roust-A-Bout
15’
15’
18’
25’
Top
Top
Top
Top
C/D
311
311
337
381
79”
79”
126”
119”
20”
20”
25”
30”
12”
12”
14.5”
17.5”
Height
Height
Height
Height
Base
32
40
50
60
x
x
x
x
Max.
Heights
40”
40”
50”
60”
15’
15’
18’
27’
Tee-Head Extension Bar
Tee-Head Extension Bar
Lift wider loads with the Sumner Roust-A-Bout
• Expands the Roust-A-Bout for handling bulky loads up to 1,000 lb.
• Takes only minutes to attach or detach.
Part
No.
Description
780010
780011
780012
R-100/150 Tee Head Extension Bar
R-200 Tee Head Extension Bar
R-250 Tee Head Extension Bar
Weight
lb
A
B
C
21
24
33
22”
29”
37”
43”
58”
73”
48”
63"
78”
Abrasives
Pipe Freeze Tools
Super Freeze™ Pipe Freezing Tools
OnSite
Supply
The Ridgid SF-2000 and SF-2500 SuperFreeze Pipe Freezing tools are self-contained
refrigeration units that freeze steel pipe and copper tube.
The in convenience of shutting off and draining complete water systems is no longer
necessary - simply isolate the section you need to repair using the SuperFreeze Pipe
Freeze Tool and perform your work while the unit continues to operate.
CSA/UL Approved.
Specifications
Capacity:
Compressor:
Refrigerant:
Weight:
Hose Length:
Dimensions:
Steel Pipe: 1/2" – 2"
Copper Tube: 1/2" – 2-1/2"
115V, 60 Hz, 4.3 A or 230V, 50 Hz, 2.4 A
R-507 (14.2 oz. charge)
55 lb.
8.5 ft. (17 ft. span)
L=21", W=10.5", H=13"
Part No.
Description
68967
SF-2500
Philadelphia, PA
610-647-8070
Safety
Threaded
Rod
Roust-A-Bout
Roust-A-Bout
Roust-A-Bout
Roust-A-Bout
B
Pipe
Hangers
R-100
R-150
R-180
R-250
A
Tools
780300
780301
780302
780303
Weight
lb
Pipe Freezing Kit
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
429
Rentals
Description
Strut
• This dependable life can raise a 1,500 lb load to height up to
25 feet in minutes
• In addition, the load can be moved vertically and horizontally at
the same time
• Wider loads (up to 1,000 lb) can be handles with the addition of
Sumner’s Tee Head Extension Bar
• The Roust-A-Bout eliminated the need for many other tools such
as Come Alongs, Scaffolds, Monorails and Swing Booms.
Part
No.
Fasteners
Pipe Handling Equipment / Pipe Freeze Tools
Fasteners
Visual Inspection Equipment
SeeSnake® Drain & Sewer Inspection Equipment
Anchors
Owning a Ridgid® SeeSnake® system expands your service capabilities and gives you the confidence and credibility to win more
work. More than 95% of SeeSnake System owners report increasing their sales and profits after purchasing a Ridgid® SeeSnake®
System.
The entire Ridgid® SeeSnake® line of pipe inspection equipment is
built to endure the toughest residential, commercial and industrial
environments.
Strut
Reels & Cameras
Ridgid® SeeSnake® reels and cameras are the best in the industry
because they are built tough for unmatched performance and
longevity.
Threaded
Rod
Camera Head
Pipe
Hangers
•• Scratch-resistant, debris-shedding sapphire crystal lens.
•• 100% stainless steel housing.
•• High power adjustable LEDs behind a thick polymer plastic
window.
•• 410,000 CCD pixel resolution
•• Small camera diameter size (22 mm - 35 mm)
•• Pipe view (wide angle) technology to be able to clearly see the
pipe wall.
•• Self-leveling option.
•• Tested water-tight to 330' in length.
Push Cable
Tools
••
••
••
••
Fiberglass inner core.
Polypropylene jacket.
Integrated push cable with power/video signal.
512Hz FleXmitter® transmitter included with all systems.
Monitors & Recorders
Abrasives
Ridgid® SeeSnake® monitors are available in various styles to meet
your needs and are designed to be rugged, portable and durable.
A new line of monitors use the Ridgid® 18V Li-on battery so you
can take your SeeSnake monitor to work in places it has never
been before. Includes a line trace peg to enable you to easily
locate the entire push cable with a locator and transmitter.
Recording Accessories
OnSite
Supply
Ridgid® SeeSnake® modular recording capability allows you to add
the latest recording capabilities to new monitors as well as any
legacy monitor with a video output. The recording accessory line
allows you to buy the configuration you want while maintaining the
option to easily upgrade your recording capabilities in the future.
Safety
Rentals
430
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SeeSnake Plus
Self-Leveling
Camera
Main Drain Lines
Industrial
Industrial
Industrial
1-1/2" to 4"
1-1/2" to 6"
2" to 12"
2" to 12"
100'
100'
200'
325'
325'
Optional 512Hz
512Hz
512Hz
512Hz
512Hz
512Hz
—
Built-In Counter
—–
CountPlus®
CountPlus®
CountPlus®
7.3 lbs.
12 lbs.
11 lbs.
24.5 lbs.
43 lbs.
43 lbs.
SeeSnak
FlatPack
Applications
Toilets/Sinks/Lines
Main Drain Lines
Line Capacity
1-1/4" to 3"
1-1/2" to 4"
Maximum Run
30'
Sonde Transmitter
Distance Measurement
Mechanical
Weight (Excl. Monitor)
Reel/Frame Diameter
Camera Diameter
12.75"
16"
24"
20"
32"
32"
0.87"/22 mm
1.18"/30 mm
1.18"/30 mm
1.365"/35 mm
1.365"/35 mm
1.365"/35 mm
Camera Length
0.87"/22 mm
1.68"/42 mm
1.68"/42 mm
1.68"/42 mm
1.82"/45 mm
1.82"/45 mm
Push Cable Diameter
0.33"/8.3 mm
0.26"/6.6 mm
0.26"/6.6 mm
0.31"/8 mm
0.44"/11 mm
0.44"/11 mm
-4° to 104° F
32° to 104° F
32° to 104° F
32° to 104° F
32° to 104° F
32° to 104° F
266'
330'
330'
330'
330'
330'
510 x 496
768 x 494
768 x 494
768 x 494
768 x 494
768 x 494
250
410
410
410
410
410
6 Luxeon LEDs
6 Luxeon LEDs
6 Luxeon LEDs
6 Luxeon LEDs
6 Luxeon LEDs
Environmental
Video
Number of Pixels
Lighting
3 Luxeon LEDs
All SeeSnake Reels and Cameras are compatible with all SeeSnake Monitors
Camera
Fasteners
Tools
Operating Temperature
Waterproof Depth
Anchors
SeeSnake
Plus
SeeSnake
Compact
Strut
MiniSeeSnake
Plus
SeeSnake
microDrain
Threaded
Rod
SeeSnake® Reel & Camera Selection
Pipe
Hangers
Visual Inspection equipment
Color Monitors & Video Recorders
DVD Pak Monitor
MINIPak Monitor
View Only / *DVDBase
Built in DVD
Main Drain Lines
10.4"
4.3" OLED/5.7" LCD
5.7"
Screen Size
Screen Type
Battery
Battery Runtime
32678 115V DVDBase
Recording Accessory
33093 115V DVDBase
Recorder w/ Battery
& Charger
OLED/LCD
LCD
18V Li-Ion
18V Li-Ion
4.5 Hrs. (2 batteries)
2.5 Hrs
5 hrs
Integrated Line Trace
Yes
Yes
Yes
Sonde Control 512Hz
Push Button
Push Button
Push Button
Lighting Controls
10-Level Digital
10-Level Digital
10-Level Digital
Screen Operating Range
14° F to 122° F
-30° F to 130° F
-4° F to 158° F
—
40° F to 95° F
—
640 x 480
320 x 240
320 x 240
Recorder Operating Range
Resolution
DVDBase Recorder
Philadelphia, PA
610-647-8070
LCD
1 or 2 18V Li-Ion
Washington D.C.
877-419-2755
*Record inspection footage from any current or previous SeeSnake
Monitor with a video output
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
431
Rentals
•• Records footage from any
SeeSnake monitor with
video output.
Safety
Recording Capability
DVDBase Video &
Audio Recorder
OnSite
Supply
Abrasives
LCD Pak Monitor
Fasteners
Visual Inspection equipment
SeeSnake® Monitors and Recorders
Anchors
LCDPak Monitor Specifications
Strut
Display
10.4" Color LCD
Resolution
640 x 480
Power Source
1 or 2 -18 V Lithium-Ion Batteries or AC Plug
Dimensions
14.3" L x 11.9" W x 12.4" H
Output
Composite Video out
Lighting
10 Level Adjustable LED Control
Recording
None
Integrated Line Trace
YES
Catalog Number
Threaded
Rod
115V
230V
Description
Weight
31763
32598
LCDPak Monitor Only
16.2 lbs
32898
32773
LCDPak Monitor with (2) Batteries and charger
22.2 lbs
MINIPak Monitor Specifications
Display
5.7" Color LCD
Resolution
320 x 240
Pipe
Hangers
Power Source
18 V Lithium-Ion Battery or AC Plug
Dimensions
14" L x 7.6" W x 10" H
Output
Composite Video out
Lighting
10 Level Adjustable LED Control
Recording
None
Integrated Line Trace
YES
Tools
Catalog Number
115V
230V
32668
32688
MINIPak Monitor Only
Description
Weight
3.9 lbs
32748
32953
MINIPak Monitor with Battery and Charger
7.9 lbs
Abrasives
DVDPak Monitor with Video & Audio Recorder Specifications
Display
4.3" OLED / 5.7" Color LCD
Resolution
480 x 272 / 320 x 240
OnSite
Supply
Power Source
18 V Lithium-Ion Battery or AC Plug
Dimensions
3.8" L x 9.1" W x 4.8" H
Output
Audio/Video (no playback output)
Lighting
10 Level Adjustable LED Control
Recording
DVD-R, DVD+R, DVD-RW, DVD+RW, DVD+R DL
Integrated Line Trace
YES
Catalog Number
Safety
Rentals
432
115V
230V
32923
34298
DVDPak Monitor Only (OLED)
33203
34308
DVDPak Monitor with Battery and Charger OLED
32673
34303
DVDPak Monitor Only (LCD)
33198
34313
DVDPak Monitor with Battery and Charger (LCD
Hartford, CT
800-969-0285
Description
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Weight
7.5 lbs
11.5 lbs
7.5 lbs
11.5 lbs
Philadelphia, PA
610-647-8070
SeeSnake® Plus Video Inspection Systems
Fasteners
Visual Inspection equipment
1-1/2" Lines up to 200' - 2" to 12" Lines up to 325'
Anchors
3 Choices to Meet Your Needs
SeeSnake Plus Video systems offer unmatched reliability and performance in a ruggedized package. Each system offers
Mini-SeeSnake Plus
Mini-SeeSnake Plus
1-1/2" Lines up to 200'
1-1/2" 90's
2" P-Traps
Ideal for where portability and maneuverability are crucial:
multi-stroy buildings, roof-tops, confined areas, etc.
Threaded
Rod
••
••
••
••
Strut
•• 100% hardened stainless steel camera head spring assembly.
•• Rugged hi-intensity lights for exceptional viewing and long life.
•• Flexible transmitters make locating easy and are compatible
with Ridgid NaviTrak II and NaviTrak locators.
•• Can be used with any SeeSnake Monitor or Recorder.
SeeSnake Plus
••
••
••
••
2" to 12" Lines up to 325'
2" 90's
3" P-Traps
Wide pipe diameter capacity range makes this system ideal for
a wide range of inspection needs.
•• Same features as the SeeSnake Plus
•• Includes an always upright, self-leveling camera design.
Pipe
Hangers
SeeSnake Plus Self-Leveling Camera
SeeSnake Plus
Catalog Number
230V
14103
SeeSnake Plus, 200' color reel
Description
Weight
43 lbs
14058
14108
SeeSnake Plus, 325' color reel
53 lbs
13988
13993
SeeSnake Plus Self-Leveling, 200' color reel
43 lbs
13998
14003
SeeSnake Plus Self-Leveling, 325' color reel
53 lbs
14063
14113
Mini-SeeSnake Plus, 200' color reel
Tools
115V
14053
SeeSnake® FlatPack Inspection Systems
1-1/2" to 4" Lines up to 100'
Abrasives
24.5 lbs
Simple drum design and maximum reliability in a 100' reel. Designed with built-in transmitter
for easy locating.
OnSite
Supply
•• 100% hardened stainless steel camera head spring assembly.
•• Rugged hi-intensity lights for exceptional viewing and long life.
•• Flexible transmitters make locating easy and are compatible with Ridgid NaviTrak II
and NaviTrak locators.
•• Can be used with any SeeSnake Monitor or Recorder.
Camera System
Safety
•• Scratch-resistant, debris-shedding, flush-mounted sapphire lens.
•• Integrated transmitter
•• Durable stainless steel camera head assembly and tapered spring assembly.
Reel
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Catalog Number
115V
230V
95567
95582
Boston , MA
800-645-6155
Description
Weight
Color FlatPack Reel only
Hartford, CT
800-969-0285
11 lbs
433
Rentals
•• 100' of push cable
•• Debris-capturing, rotating drum with mercury-fee slip spring.
Fasteners
Visual Inspection Equipment
SeeSnake® Compact Video Inspection System
1-1/2" to 4" Lines up to 100'
Anchors
SeeSnake Compact System offers fast setup for quick inspections. It's ultra portability makes this system an excellent complement to
your SeeSnake Plus Each system offers
••
••
••
••
100% hardened stainless steel camera head spring assembly.
Rugged hi-intensity lights for exceptional viewing and long life.
Flexible transmitters make locating easy and are compatible with Ridgid NaviTrak II and NaviTrak locators.
Can be used with any SeeSnake Monitor or Recorder.
Standard Equipment
Strut
•• Battery port for use with optional 18B battery.
•• AC/DC operation
MINIPak Monitor System
••
••
••
••
High resolution monitor
Push button controls for sonde power, lights, flip-screen and zeroing counter
Splash resistant case with built in sunshade.
Video In/Out jack
Threaded
Rod
Camera System
•• Scratch resistant, debris shedding, flush mounted sapphire crystal lens.
•• Integrated transmitter.
•• Durable stainless steel camera head assembly and tapered spring assembly.
Reel
Pipe
Hangers
•• 100' of push cable.
•• Debris capturing, rotating drum with mercury-free slip-ring.
•• Counter to display distance on monitor n feet and inches.
Catalog Number
115V
230V
Description
Weight
Tools
32903
32948
SeeSnake Compact, with battery & charger
20.9 lbs
32913
32753
SeeSnake Compact System
16.9 lbs
32658
32683
SeeSnake Compact Reel Only
13 lbs
SeeSnake® microDrain™ Video Inspection System
1-1/2" to 3" Lines up to 30'
Abrasives
The microDrain inspection system is a leap forward in small diameter sewer and drain
inspection technology. This system enables pipe inspection in places previously difficult to
inspect.
OnSite
Supply
•• Small diameter and tight turn radius camera head goes through many tolet traps
without the need to disassemble or dismantle plumbing fixtures.
•• Multiple monitor capability utilizes any SeeSnake Monitor or the microEXPLORER™
digital inspection camera.
•• Lightweight and compact design stows in service trucks and is easily carried.
Catalog Number
Description
Weight
Safety
Complete System
32928
Rentals
434
Hartford, CT
800-969-0285
microDrain/microEXLPORER System
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
8.6 lbs
Philadelphia, PA
610-647-8070
SeeSnake® micro™ Inspection Camera
Detect and Diagnose the Unreachable!
Easily perform visual inspections in hard to reach places.
2.4" Color LCD (160 x 234 resolution) display.
Includes 3' cable with camera. (Expandable to 30')
Complete with accessories: Mirror, Hook and Power Magnet.
Waterproof to 10'
Feature 2 adjustable LEDs for lighting dark spaces.
Powered by (4) AA batteries.
•• With the SeeSnake micro inspection camera you can now fix a variety of problems by using the standard attachments. With the magnet, remove small parts, fasteners etc. Using
the mirror attachment allows the user to see 90o away from the camera. The hook attachment enables the user to grasp and manipulate small parts, wires, etc.
31118
26663
31123
26663
26668
31128
31133
Fasteners
Description
SeeSnake® micro™ Inspection Camera, 17 mm
Replacement Imager Head and Cable, 17 mm
SeeSnake® micro™ Inspection Camera, 9 mm
Replacement Imager Head and Cable, 9 mm
Accessory Pack (Mirror, Hook & Magnet)
Universal 3' Cable Extension
Universal 6' Cable Extension
Abrasives
SeeSnake® LT1000 Laptop Interface System
Leverage the Power and Flexibility of Your Laptop!
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
LT1000M
Safety
LT1000
The full LT1000 system mounts directly on your Mini or Standard Reel giving you a
stacked and stable platform with a single cord interface.
Compatibility: All SeeSnake Mini and Standard Reels
LT1000M
The LT1000M is a detached system that allows you to interface with any SeeSnake Reel.
Compatibility: All SeeSnake Reels
Includes: SeeSnake HQ Monitoring/Recording Software, 3' USB Cable, LT1000M Frame,
AC Power Cable
OnSite
Supply
By using a laptop as a monitor, your recording and monitoring options are as powerful as
your PC. Digital recording, DVD burning, Wireless Transmission and Online Hosting are all
possible with the LT1000 and a Laptop. Paired with a ruggedized laptop, the LT1000 is
the most powerful and flexible system on the market.
•• Ultimate Flexibility in recording, monitoring and reporting. Unlock the power of your
Laptop to Monitor, Record and Communicate with SeeSnake HQ and RIDGIDConnect.
•• Clean Keys Control Pad allows you to keep gloved hands off your Laptop while controlling camera recording and operation during an inspection.
•• Li-Ion battery lets you perform inspections without the availability of AC power.
•• Laptop Stabilization System allows you to secure and stabilize your Laptop on the reel
for protection in the field (full LT1000 System only).
Tools
•• The 2.4" Color LCD
display provides
crisp, clear images
with remarkable
detail.
LT1000
Call Today for Complete
Information and Specifications!
Hartford, CT
800-969-0285
435
Rentals
Part No.
Pipe
Hangers
Threaded
Rod
••
••
••
••
••
••
••
Anchors
SeeSnake® micro™
Ask your salesman for
a demonstration!
Strut
Visual Inspection Equipment
Fasteners
Visual Inspection Equipment
microEXPLORER™ Digital Inspection Camera
Anchors
Find It. Record It. Share It.
A completely integrated digital platform that allows you to
find, record and share detailed images and video of hard to
reach places. Equipped with many advance features including self-leveling, pan, and 3X Digital Zoom to help achieve an
extremely accurate inspection.
Benefits
Strut
•• Capture and archive images and videos as part of a more
effective preventative maintenance program.
•• Download images and videos to a computer and e-mail
them to a colleague.
•• Self-leveling picture maintains a consistently up-right image and eliminates the the need to twist the camera into
correct position.
•• 4 high intensity LEDs and low light vision control allows
for inspections in the darkest of areas.
•• High resolution camera and high quality 3.5" digital LCD
screen clearly identifies cracks in heat exchangers and
defects in welds or castings, etc.
2311-21
Threaded
Rod
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
Reel
•• 100' of push cable.
•• Debris capturing, rotating drum with mercury-free slip-ring.
•• Counter to display distance on monitor n feet and inches.
Pipe
Hangers
microEXPLORER Specifications
Tools
Display
3.5" Color LCD (320 x 420 resolution)
Image Capture
JPG Images (1280 x 1040) AVI Video (320 x 240)
Recording Medium
Internal Memory or SD card
Image Controls
Pan, Zoom, Self-Leveling, Low-Light Vision
Camera Diameter
0.7" (17 mm)
Cable Reach
3' (expandable to 30' with optional extensions)
Waterproof
Camera and Cable to 10'
Power Source
3.7 V Li-Ion battery (4 hrs. continuous run-time)
Catalog Number
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommended maximum extension is 19')
Description
Weight
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
Abrasives
OnSite
Supply
30063
microEXPLORER Digital Inspection Camera
1.93 lbs
30083
Replacement Camera Head
0.82 lbs
30203
Accessory PAck (Mirror, Hook, Magnet)
0.11 lbs
30198
Replacement 3.7V Li-Ion Battery
0.24 lbs
30208
DC Adapter
0.26 lbs
30073
Audio Memo Recorder
0.26 lbs
31128
Universal 3' Cable Extension
0.75 lbs
Part No.
31133
Universal 6' Cable Extension
1.5 lbs
2311-21
Includes Carrying case, Operators Manual, (1) Li-Ion Battery, Battery Charger, USB
cable, Hook, Magnet, Mirror
Safety
Rentals
34953
Description
SeeSnake Digital Adapter
Hartford, CT
800-969-0285
2312-21
Description
M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
Part No.
With the RIDGID® microEXPLORER™ Digital Inspection Camera and
the new SeeSnake® Digital Adaptor, you’ll immediately add digital image and video recording capabilities and a secondary playback screen
to your existing drain inspection monitor. Or, use the microEXPLORER
Camera separately for out-of-pipe applications.
Catalog No.
2310-22 Specifications
Volts:
12 V DC
LCD Display:
3.5" Hi-Res Color
Camera Head Dia.:
0.7" (17 mm)
Adj. Image Zoom:
4X
LED Brightness Adjust: (4X) Control
Cable Length
3'
2311 Accessories
SeeSnake Digital Adapter
436
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for automotive applications.
Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
Weight
1.32 lbs
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Performance and Features
Current Strength/
Signal Angle
•• Target Line – Guides operator down the line and
shows changes in direction. Indicates when distortion
is present to avoid erroneous locates.
•• Left-Right Guidance Arrows – Points operator to
target utility.
•• Proximity Signal and Signal Strength – Helps the
operator to center the locator closer to the target.
•• Continual Depth – Shows depth changes in real time.
•• Omni-Seek® – Increases accuracy and efficiency when in
passive mode. Continuously searches passive power and
radio bands to locate and avoid unknown metallic lines.
•• User-defined frequencies – SeekTech SR-60 can be
set to any frequency between 10 Hz and 490,000 Hz
making it an universal receiver. SeekTech SR-20 can be
set between 10 Hz and 35,000 Hz.
Proximity Signal
Left/Right Guidance Arrows
Signal Strength
Strut
Target Line
Threaded
Rod
Depth/Distance
SR-60 Line Locator
The fastest, easiest, most versatile receiver available.
SR-20 Line Locator
Versatility
A lightweight, rugged receiver that provides all the information
needed for faster, more accurate locates.
•• Can trace any frequency from
10 Hz to 490,000 Hz
•• Can trace energized lines and
sondes simultaneously.
•• All the ease and accuracy of
the SR-20 but with ALL locatable frequencies.
•• Choose the SR-60 for fast,
confidant locates even under
tough conditions (poor
conductors, solid conditions,
poor grounding, etc.
••
••
••
••
••
50 Hz, 60 Hz, <4kHz Broadband
50 Hz, 60 Hz,
<4kHz Broadband
Passive Radio
Trace
4 kHz - 15 kHz,
15 kHz - 36 kHz
Sonde
Frequencies
16 Hz, 512 Hz,
640 Hz, 850 Hz,
8 kHz, 16 kHz, 33
kHz
Power Source
4 C-Cell Batteries
Battery Life
Approx. 16 hrs.
Weight
3.5 lbs
Tools
Passive
Power Trace
Abrasives
128 Hz, 1 kHz, 8
kHz, 33kHz
4 kHz - 15 kHz, 15 kHz - 36 kHz
OnSite
Supply
Meets FCC Class A Requirements
Sonde
16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHz, 16
Frequencies** kHz, 33 kHz
Catalog No.
Description
Weight
Power Source
4 C-Cell Batteries
Battery Life
Approximately 16 hrs.
21893
SeekTech SR-20 Line Locator
4 lbs
Weight
5.1 lbs
16728
Remote Transmitter, 512-AAA
—
22473
SR-20 Case
Meets FCC Class A Requirements
9 lbs
** 30 user defined frequencies can be set from 10 hz to 490,000 Hz
Catalog No.
Description
22163
SeekTech SR-60 Line Locator
29798
S60 Case
Philadelphia, PA
610-647-8070
Weight
5.1 lbs
5 lbs
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
437
Rentals
Passive Radio
Trace
128 Hz, 1 kHz, 8 kHz, 33 kHz, 51 kHz, 93 kHz,
200 kHz, 262 kHz
Active Line
Frequencies
Safety
SR-60 Specifications
Passive Power
Trace
Hard Plastic Carrying Case
Surface Markers and Clip
Instructional DVD
Operator's Manual
4 C-Cell Batteries
SR-20 Specifications
Hard Plastic Carrying Case
Surface Markers and Clip
Instructional DVD
Operator's Manual
4 C-Cell Batteries
Active Line
Frequencies
Pipe
Hangers
Standard Equipment
Standard Equipment
••
••
••
••
••
Fasteners
SeekTech® Utility Line Locators
Anchors
Utility Locators
Fasteners
Utility Locators
SeekTech® Utility Transmitters
Anchors
All RIDGID transmitters generate a signal onto the buried
cable in one of three ways:
•• Direct connection using connection cords.
•• Induction with the optional inductive signal clamp
•• Induction from the transmitter
Strut
SeekTech ST-510 Line Transmitter
Threaded
Rod
•• 10 watts of fully variable power output.
•• LCD display provides instant visual feedback on line resistance
and current flow.
•• Two 25' lead wires with heavy duty clips.
•• Compatible with competitive equipment.
Frequencies
Direct Connect
128 Hz, 1 kHz, 8 kHz, 33 kHz, 262 kHz
Induction
1 kHz, 8 kHz, 33 kHz, 262 kHz
Pipe
Hangers
Catalog No.
SeekTech ST-33Q Line Transmitter
•• The ideal transmitter for inducing current onto a target line
•• Increase efficiency and trace further by inducing over 8 times
more current than the competition onto a target line.
•• The most versatile transmitter available with any direct connect frequency between 10 Hz and 490 kHz.
Description
Weight
21903
SeekTech ST-510 Transmitter
5.8 lbs
20503
SeekTech 4" Inductive Signal Clamp
2 lbs
Tools
Frequencies
Direct Connect
(Factory Set)
128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz, 262 kHz
Direct Connect
(User Set)
10 Hz – 490 kHz
Induction
8 kHz, 33 kHz
Abrasives
Catalog No.
Description
26168
SeekTech ST-33Q Transmitter
20503
SeekTech 4" Inductive Signal Clamp
Weight
11.1 lbs
2 lbs
SeekTech ST-305 Line Transmitter
OnSite
Supply
SeekTech Inductive
Signal Clamp
Safety
•• Allows users to apply a signal
to cable or pipe when a direct
connection is not possible.
•• Compatible with all RIDGID
transmitters.
Catalog No.
SeekTech 4" Inductive Signal Clamp
20503
Rentals
438
Description
Hartford, CT
800-969-0285
Weight
•• Lightweight and compact transmitter that delivers up to 5
watts of power.
•• Can transmit 2 frequencies simultaneously.
•• Audio feedback confirms a good circuit before beginning trace.
Frequencies
Direct Connect
1 kHz, 8 kHz, 33 kHz, 262 kHz
Induction
1 kHz, 8 kHz, 33 kHz, 262 kHz
Catalog No.
Description
Weight
21898
SeekTech ST-305 Transmitter
2.5 lbs
20503
SeekTech 4" Inductive Signal Clamp
2 lbs
2 lbs
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Strut
Anchors
Battery-Operated Press Tools
Fasteners
Battery Powered Crimpers
270°
For convenience and portability, the RP330-B is the logical
choice. Featuring a barrel that rotates 270 degrees and a longer
service interval, the RP330-B is designed to handle your toughest
construction projects. Powered by a 18V Lithium-Ion Battery, the
RP330-B offers 50% more presses per battery charge than our
previous model!
Specifications
Specifications
•• Capacity:1/2" – 1-1/4" for copper and stainless steel; 1/2" 1-1/2" for PEX
•• Compatible with all RIDGID compact series pressing attachments
•• 270°Barrel/Jaw Swivel
•• Battery: 18V 1.1 Ah Li-Ion
•• Battery Charger:115V
•• Hydraulic Ram Output: 5,400 lbs. (24kN)
•• Weight: 6.4 lbs. with Battery
•• Operating Temperature Range:15°F to 122°F
•• Approximate Cycle Time:5 seconds
•• Standard Kit includes: RP210-B Press Tool, 2 Batteries, Battery
Charger and Carrying Case
Weight
Description
Weight
27913
RP330B ProPress Kit without jaws
21.75 lbs
27918
RP330B ProPress Kit with 1/2" - 1"
Jaw Sets (copper & stainless steel)
33.8 lbs
27923
RP330B ProPress Kit with 1/2" - 2"
Jaw Sets (copper & stainless steel)
54 lbs
32743
Battery, 18V 2.2 Ah Lithium-Ion
1.5 lbs
27958
115V Charger
1.25 lbs
27933
RP 330 Carrying Case
10.25 lbs
31048
RP210B ProPress Kit without jaws
31028
RP210B ProPress Kit with 1/2" 1-1/4" Jaw Sets
(Copper & Stainless Steel)
26 lbs
31038
RP210B ProPress Kit with 1/2" - 1"
Jaw Sets (PureFlow PEX)
24 lbs
31033
RP210B ProPress Kit with 1/2" - 1"
Jaw Sets (ASTM PEX)
23 lbs
31013
Battery, 18V 1.1 Ah Lithium-Ion
1 lbs
27958
115V Charger
1.25 lbs
ProPress® RP 330-C Corded Crimp Tool Kit
31023
RP 210B Carrying Case
10.25 lbs
1/2" to 4" Capacity
Standard Series® ProPress XL-C™ Rings
For 2-1/2" - 4" Copper Tube
For use with ProPress® XL-C Copper Fittings
Catalog No.
20483
Description
XL-C Ring Kit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
16 lbs
Catalog No.
Same features as the RP 330B but in a corded version.
Catalog No.
Description
Weight
27938
RP330C ProPress Kit without jaws
19.6 lbs
27943
RP330C ProPress Kit with 1/2" - 1"
Jaw Sets (copper & stainless steel)
31.75 lbs
27948
RP330C ProPress Kit with 1/2" - 2"
Jaw Sets (copper & stainless steel)
52 lbs
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
439
Safety
Description
Capacity:1/2" – 4"
270°Barrel/Jaw Swivel
Battery: 18V Li-Ion
Battery Charger:115V
Hydraulic Ram Output: 7,200 lbs. (32kN)
Weight: 9.8 lbs. with Battery
Operating Temperature Range:15°F to 122°F
Approximate Cycle Time:5 seconds
Standard Kit includes: RP330-B Press Tool, 2 Batteries, Battery
Charger and Carrying Case
•• Compatible with all RIDGID®Standard Series Pressing Attachments
•• For use with Copper, Stainless Steel and PEX Tubing
•• Approved by UL to UL and CSA standards
Rentals
Catalog No.
••
••
••
••
••
••
••
••
••
Pipe
Hangers
1/2" to 4" Capacity
Tools
For a fast and reliable way to join copper, stainless steel and
PEX, the new RP 210-B has more capacity than any compact
press tool on the market. This model is 2 inches shorter and 25%
lighter than our previous compact tool and features the longest
service interval available (32,000 cycles), an improved swiveling
barrel and a powerful 18V Lithium-Ion battery.
ProPress® RP 330-B Battery Crimp Tool Kit
Abrasives
1/2" to 1-1/4" Capacity (Copper & Stainless Steel)
3/8" to 1-1/2" Capacity for PEX
OnSite
Supply
ProPress® RP 210-B Compact Battery Crimp Tool
Threaded
Rod
270°
Fasteners
Battery Powered Crimper Accessories
Standard Series
Press Jaws
Press Jaws for Crimpers
For Copper &
Stainless Steel
Anchors
Compact Series
Press Jaws
For Copper &
Stainless Steel
Designed in conjunction with the fitting manufacturer to ensure
compatibility. RIDGID Standard Series pressing jaws are only compatible with RIDGID Standard Series Pressing Tools
Strut
40% lighter and 33% smaller than Standard Series Jaws. Use
only with RIDGID Compact Pressing Tools.
Catalog No.
Description
Catalog No.
Weight
16958
1/2" Jaws for Compact ProPress
2.5 lbs
16963
3/4" Jaws for Compact ProPress
2.5 lbs
16978
1" Jaws for Compact ProPress
2.5 lbs
Description
1/2" Jaws for Standard ProPress
2.5 lbs
76657
3/4" Jaws for Standard ProPress
2.5 lbs
76662
1" Jaws for Standard ProPress
2.5 lbs
76667
1-1/4" Jaws for Standard ProPress
2.5 lbs
Threaded
Rod
Standard Series
Press Jaws
For PureFlow PEX
Compact Series Press Jaws
For PureFlow PEX
Pipe
Hangers
Catalog No.
Catalog No.
Description
Weight
76652
Description
Weight
Weight
22653
1/2" Jaws for PureFlow
2.5 lbs
Tools
17003
3/8" Jaws for PureFlow
2.5 lbs
22658
5/8" Jaws for PureFlow
2.5 lbs
17008
1/2" Jaws for PureFlow
2.5 lbs
22663
3/4" Jaws for PureFlow
2.5 lbs
19813
5/8" Jaws for PureFlow
2.5 lbs
22668
1" Jaws for PureFlow
2.5 lbs
17013
3/4" Jaws for PureFlow
2.5 lbs
22673
1-1/4" Jaws for PureFlow
2.5 lbs
17018
1" Jaws for PureFlow
2.5 lbs
22678
1-1/2" Jaws for PureFlow
2.5 lbs
22683
1-1/4" Jaws for PureFlow
2.5 lbs
22688
1-1/2" Jaws for PureFlow
2.5 lbs
Abrasives
Press Snap™ Soil
Pipe Cutter
Compact Series
Press Jaws
For ASTM F1807
PEX
For Use With RIDGID
Standard Press Tools
Provides fast, easy way to cut
cast iron soil pipe.
OnSite
Supply
Catalog No.
• Cuts 1-1/2" to 4" No Hub & Service Weight Soil Pipe
• No lengthy lever arms
• Eliminates need to score pipe
• Completes cut in seconds
• Standard Kit includes: Press Snap Cutter, Case and OPerator's
Manual
Safety
Description
Weight
22953
3/8" ASTM F1807 Jaws
2.5 lbs
22958
1/2" ASTM F1807 Jaws
2.5 lbs
22968
3/4" ASTM F1807 Jaws
2.5 lbs
Catalog No.
22973
1" ASTM F1807 Jaws
2.5 lbs
34403
Press Snap Soil Pipe Cutter Kit
12 lbs
22978
1-1/4" ASTM F1807 Jaws
2.5 lbs
34678
Case Only
3.4 lbs
23473
3/8"-3/4" ASTM F1807 Gauge
1 lbs
23478
1" ASTM F1807 Gauge
1 lbs
23898
1-1/4" JASTM F1807 Gauge
1 lbs
Rentals
440
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
Washington D.C.
877-419-2755
Weight
Philadelphia, PA
610-647-8070
Repl.
Cable
59787
59792
59797
59802
K-3
K-3, DH
K-66’
K-6, DH
3’ Toilet Auger with Bulb Head
3’ Toilet Auger with Drop Head
Toilet Auger with Bulb Head
6’ Toilet Auger with Drop Head
—
—
60362
60367
Model K-40 Drain Cleaners
For 3/4” to 2-1/2” Drain Lines
• Includes machine
with guide hose,
mounting bracket
and
C-13IC, 5/6” x 35”
Cable with Inner
Drum
• 1/8 HP induction
motor quietly
delivers enough
torque to clear
even the toughest
blockages
• Premium quality,
compression wound inner core cable resists kinking and
combines strength and flexibility
• Two-piece “twist lock” drum housing will not dent or corrode
and allows easy access to the inner drum and cable
• The Auto feed units make the job easier and faster - ultra light
and reliable.
Call for Complete Specifications and Models Available
This catalog is comprised mostly of items we
carry in stock. NEFCO adds new items to its
inventory regularly. If you need an item that is
not listed in this catalog, call us.
If we don’t have the item, it may be possible to
special order it.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Part
No.
Model
No.
Description
66492
66512
66497
66517
K-60SP
K-60SP
K-60SP-SE
K-60SP-SE
115V
230V
115V, Incl. A-60 Tool Kit, A-62
Cable Kit
230V, Incl. A-60 Tool Kit, A-62
Cable Kit
Wt.
41
41
92
Strut
Threaded
Rod
Description
92
Tools
Model
No.
Model K-39-1 Kit
For 3/4” to 2-1/2” Drain Lines
• Excellent for small line
cleaning - opens clogged
lavatory, sink lines, urinals and
tub/shower drains
- 5/16” cables best for 3/4” to
1-1/2” lines
- 3/8” cables best for 1-1/4”
to 2-1/2” lines
• Available in 3 styles: slide action chuck, powerfeed, and 3 jaw
chuck
- Chuck styles allow for quick locking/releasing of cable
- New powerfeed unit keeps hands off cable
• Lightweight, easy-to-use, no set up required
• Variable speed 1/2” ball bearing power unit rotates cable
0-500 rpm’s
• Two piece twist lock canister with interchangeable inner drum
- Makes cable change out simple; easy to match the right cable
to the job
- New inner drum prevents water leaks and greatly reduces
cable flip over
- Drums won’t rust or dent - ever
• Drum Capacity: 50’ of 5/16” or 35’ of 3/8”
• CSA Approved
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
441
Abrasives
Part
No.
OnSite
Supply
• Available in Drop Head or
Bulb Head models
• K-6 models telescope for
additional reach
• Negotiate waterconserving toilets
• New, durable, kink-resistant, 1/2” compression-wrapped inner
core cable
• Large, ergonomically designed handles
• Vinyl guard protects porcelain.
Safety
Features include:
• Unique, easy-to-use
instant-acting cable clutch
maximizes operator control
- Push handle down, cable
spins at 600 rpm
- Release handle, cable stops
instantly, no overrun to kink
or damage cable
• Simple adjustment knob
allows unit to spin booth
7/8” and 5/8’ diameter cable
- adjusts in seconds
- 7/8” cable (C-10) cleans 2”
to 4” lines through 150 feet
- 5/8” cable (C-7, C-8, C-9)
cleans 1-1/4” to 4” lines through 125'
• Remove only two bolts to access jaw set for cleaning or
replacement - removal of same bolts provides access to belt drive
• Equipped with 1/2 HP motor
• Includes: Machine with A-1 Operator's Mit, A-12 Pin Key, and
A-60-12 Rear Guide Hose.
• CSA Approved
Pipe
Hangers
For 1-1/4” to 4” Drain Lines
Anchors
Model K-60SP
High quality tools in 3’
and 6’ lengths provide fast
and safe clearing of toilet
obstructions.
Rentals
K-3/K-6 Toilet Augers
Fasteners
Drain Cleaners
Fasteners
Pipe Wrenches
Anchors
Straight Pipe Wrench
Aluminum Handle Straight Pipe Wrench
Sturdy, cast-iron housing and I-beam handle with full floating hook
jaw, nonstick adjustment nut and replaceable hook and heel jaws.
Nearly 40% lighter than comparable cast-iron models of the
same size. Jaws and all other parts identical to Ridgid Heavyduty Wrenches. Also available with special hook and heel jaws for
plastic coated pipe.
Model No.
Size (In)
Pipe Cap. (In)
Weight (lbs)
31000
6
6
3/4
0.5
31005
8
8
1
0.75
31010
10
10
1-1/2
1.75
Part No.
Part No.
Strut
Threaded
Rod
31015
12
12
2
2.75
31020
14
14
2
3.5
31025
18
18
2-1/2
5.75
31030
24
24
3
9.75
31035
36
36
5
19
31040
48
48
6
34.25
310045
60
60
8
51.25
End Pipe Wrench
Pipe
Hangers
Model No.
Size (In)
Pipe Cap. (In)
Weight (lbs)
31055
E-8
8
1
0.75
31060
E-10
10
1-1/2
1.75
31065
E-12
12
2
2.75
31070
E-14
14
2
3.5
31075
E-18
18
2-1/2
5.75
31080
E-24
24
3
9.75
31085
E-36
36
5
19
Tools
Abrasives
OnSite
Supply
A double jaw gives fast, ratchet-like action in either direction. The
heavy-duty, model has replaceable alloy steel jaws. The light-duty
model has a one-piece forged alloy steel handle and jaw. Ideal for
use in close quarters.
Model
No.
Size
(In)
Pipe Cap.
(In)
Chain
(in)
Weight
(In)
Safety
31310
C-12
2
4
15-3/4
1.75
31315
C-14
2
5
18-1/2
2.75
Rentals
31320
C-18
2-1/2
5
20-1/4
6
31325
C-24
3
5
20-1/4
8.25
31330
C-36
4-1/2
7-1/2
29
15.25
442
Pipe Cap. (In)
Weight (lbs)
31090
810
10
1-1/2
1
47057
812
12
2
2.5
31095
814
14
2
2.5
31100
818
18
2-1/2
3.75
31105
824
24
3
6
31110
836
36
5
11
31115
848
48
6
18.5
RapidGrip
Wrench
Hartford, CT
800-969-0285
Model No.
Size (In)
Pipe Cap. (In)
Weight (lbs)
10348
10
10
1-1/2
1.6
10358
14
14
2
3.1
Part No.
Plumber’s “T" Handle
Torque Tools
Chain Wrench
Part No.
Size (In)
The RapidGrip is
designed to provide
you with the speed
and performance you
demand. Quick one-hand
operation makes your jobs move faster. The spring-loaded jaw
design provides rapid ratcheting action.
Assures a fast and easy
grip for pipe working in
restricted spaces or close
to a wall. Available in
Aluminum.
Part No.
Model No.
Durable “T-Handle" type tools
feature a unique locking collar
allowing the tool to be used as an
un-torqued snug-up or back-off
as well as a conventional torque
tool. With locking collar retracted,
the tool torques to the specified
torque in the right hand direction
(tightening), while ratcheting in the
left hand direction. When proper
torque value has been achieved, the
mechanism slips internally and over tightening is impossible.
Part No.
1-L
2-S
2-SH
2-SM
2-SC
8-A
8-AH
7-P
Boston , MA
800-645-6155
Description
5" long shaft, 60 in-lb 5/16" socket
2-3/4" shaft, 60 in-lb 5/16" socket
Standard, 60 in-lb 5/16" socket
Mission Standard, 80 in-lb 5/16" socket
Clamp-all, 80 in-lb 1/4" socket
Anaheim, 80 in-lb 3/8" socket
Anaheim, 80 in-lb 3/8" socket w/ hammer end caps
60 in-lb w/ 1/4" sq. dr. & dbl. ended 1/2" – 5/16" socket
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Stanley® Steel Long Tapes - 3/8"
Wide Blade
Fatmax Tape Rules - 1-1/4"
Wide Blade Reinforced with
Blade Armor™ Coating
• Sturdy lightweight molded case
designed to fit the hand comfortably
• Easy-to-read white blade with 1/8"
graduations, foot markings printed
in red
• True zero hook with double spurs
• Smooth, easy rewinding action
33-735 35
33-730 30
33-726 26
1-1/4
1-1/4
1-1/4
English
English
English
Stud
Case
Markings
Color/Mat'l
@
Yellow ABS
Yellow ABS
Yellow ABS
16"
16"
16"
19.2"
19.2"
—
12V Li-Ion
No-Hub Driver
Volts:
No Load Speed:
Torque:
Chuck Type:
Tool Weight (w/battery):
Part No.
12 V DC
0-250 / 0-750 RPM
60 in.-lbs. & 80 in-lbs.
1/4" Hex
2.75 lbs.
Blade Blade
Length Width Case Case
(ft)
(in)
Units Color/Mat'l
3/8
3/8
English Yellow ABS
English Yellow ABS
Stud
Markings
@
—
16"
—
—
Open Reel Fiberglass
Long Tapes 1/2" Wide Blade
• Fiberglass reinforced PVC tape for less
stretch
• Blades made with PVC, tape can be
wound wet and easily cleaned
• Two-sided printing with multiple formats
• High impact ABS case with rubber
over-mold
• High visibility yellow color makes it easy
to find on the job site
Blade Blade
Stud
Part Length Width Front Back
(ft)
(in) Format Format
No.
34-790 100
34-793 200
1/2 Fractional Decimal
1/2 Fractional Decimal
Markings
@
16"
16"
Fasteners
—
—
Safety
2401-22 Specifications
3 to 1 gear drive for faster rewind
Stainless steel blade for long life
True zero hook with double spurs
High impact ABS case with rubber
over-mold
• Steel roller cage to protect case from
being cut by blade during retraction
34-129 50
34-130 100
• KIT Includes (2) Batteries, Charger, (3) Shockwave Sockets, &
Carrying Case.
—
—
•
•
•
•
Part
No.
• Specific Torque Settings for
60 and 80 in-lbs - Fast accurate installation of no-hub
couplings
• Auto Shut-Off w/ LED Indica2401-22
tor - Alerts users that torque
limit has been achieved
• LED Calibration Indicator - Alerts user when calibration is
needed (25,000 cycles)
• 0-750 RPM Drill Mode - for general drilling and fastening
• Fastens up to 300 steel clamps on a single charge
• Compact/Lightweight Design
• Built-in Fuel Gauge & LED for illumination.
16"
16"
FatMax® Long Tapes
3/8" Wide Blade
With specific torque settings
for 60 and 80 in/lbs, the M12™
Cordless No-Hub Driver is
specifically designed to quickly
install no-hub couplings with
accuracy and repeatability.
English Yellow ABS
English Yellow ABS
Threaded
Rod
Blade Blade
Length Width Case
(ft)
(in)
Units
3/8
3/8
Pipe
Hangers
Part
No.
34-103 50
34-106 100
Markings
@
Tools
Blade Blade
Stud
Part Length Width Case Case
(ft)
(in)
No.
Units Color/Mat'l
Abrasives
• Blade Armor™ coating is a
patented industrial thermoplastic coating. It’s on the first 6" of
the FatMax® Tape Rules for maximum durability and reduced
blade breakage
• 1-1/4" wide blade (25% wider) with 11’ of standout
• Easy to read graphics
• Mylar® polyester film coating extends blade life
• Top forward blade lock makes it easier to lock and unlock the blade
• Exclusive cushion grip built into the case for a comfortable
slip-resistant grip and impact resistance
• High impact, ABS case with rubber over-mold
• Specially designed, hook grabs on side, top or bottom
• Strong spring for smooth retraction
• Stainless steel wearplate protects case from being cut by blade
OnSite
Supply
®
Strut
FatMax® Blade Armor™ Tape
Rules
Anchors
Stanley Rules
Description
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
443
Rentals
2401-22 12V Cordless Li-Ion No-Hub Driver
2401-20 Screwdriver, Bare Tool Only
Fasteners
Cutting Tools / Pry Bars / Layout Tools
Anchors
Maxsteel™ Aviation Snips
Classic 99® Retractable Utility Knife
Strut
• Interlocking nose to hold
blade
• Multi-position blade slide
• Die-cast metal handle is
durable and lightweight
• Furnished with 3 each 11-921
heavy duty blades
• Blade storage in handle
14-563
14-562
14-564
14-566
14-567
14-568
Threaded
Rod
Long Tapes 1/2" Wide Blade
Pipe
Hangers
•
•
•
•
•
•
•
•
•
Exceeds ANSI standards for cutting performance and durability
Serrated cutting edges prevent slippage when cutting
Double overwind spring for longer life
High leverage, compound cutting design cuts up to 18-ga. steel
Slip-resistant bi-material palm cushion grip
Patented hinge plate for easy product function identification
One-handed automatic latch release with the squeeze of the handles
Chrome plated hardware
Ideal for cutting aluminum vinyl siding, screening, cardboard,
leather and copper
Tools
Part No.
Description
Overall Length
14-563
14-562
14-564
14-566
14-567
14-568
Straight
Left Curve
Right Curve
Long Cut Straight
Offset Left Curve
Offset Right Curve
9-21/32"
9-21/32"
9-21/32"
11-27/64"
9-29/64"
9-29/64"
Forged Hexagonal Steel Ripping Bar
Abrasives
• High carbon steel for extra strength
• Chisel end beveled
• Slotted claw and chisel end
OnSite
Supply
55-124
55-130
55-136
55-424
55-430
3/4 x 23
3/4 x 29
3/4 x 35
23/32 x 23
23/32 x 29
19
19
19
18
18
x
x
x
x
x
610
760
915
610
760
Length
10-099
10-788
10-777
10-209
6
6-1/2
7
6-1/2
10-788
10-777
10-209
1992® Heavy Duty Utility Blade
• Heavy duty utility blade for light sheet
materials, paper and cardboard
Part No.
Packed
Length
Thickness
11-911
11-911A
11-921
11-921A
5 per card
100 per dispenser
5 per card
100 per dispenser
2
2
2-7/16
2-7/16
.017
.017
.024
.024
Wonder Bar® Pry Bar
• Forged high carbon steel
• Heat treated for extra
toughness with polished
and beveled cutting
edges
• Contoured bar is ideal
for pulling nails, prying, lifting, scraping
• Beveled nail slot both ends
Overall Length
(in)
(mm)
Part No.
Part No.
10-099
Goose neck pattern
Goose neck pattern
Part No. Blade Width (in) (mm)
55-515
1-3/4
44
Overall Length (in) (mm)
12-3/8
314
Safety
We have Concrete anchors available!
Rentals
444
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
FatMax® Brassbound Hardwood Level
• 12" square has
precision machined
working surfaces
• High visibility yellow,
die cast handle
• Durable etched, hard
chrome plated blades
• Rust-resistant for blade longevity
• Scriber for easily marking surfaces
• Easy read vial
• Brass hardware
• Level accuracy of 0.0010 in/in(1.0 mm/m)
• Precision milled hardwood for accuracy and long life
• Thicker glass vial covers for increased impactresistance with rubber gaskets to protect
vials from moisture
• Brass reinforced rubber end caps to absorb shock
• Metal hook allows easy job-site hanging (48" only)
Part No.
Length
42-345
42-350
24"
48"
Fasteners
Strut
Combination Squares
Anchors
Cutting Tools / Pry Bars / Layout Tools
No. of Vials
6
6
Part No. Description Body Color Overall Length Yellow Fill
Yes
Yes
Yes
Yes
Premium Adjustable Quick Square® Layout Tool
Rule Length
6-3/4"
Solid Hardwood Try
Square
Part No.
• Durable etched stainless steel
blade
• Coated blade to resist rust
• 1/16" graduations
• Handle is solid hard wood,
lacquer coated with brass face plates
Part
No.
46-209
B
lade Length
in
mm
Blade
Width
8
1-1/2
203
Length
43-500
43-504 Magnetic
43-502
43-506 Magnetic
43-507
24"
24"
48"
48"
72"
Hand Holes
Yes
Yes
Yes
Yes
Yes
No. of Vials
3
3
3
3
3
(1
(1
(1
(1
(1
Level/2
Level/2
Level/2
Level/2
Level/2
Plumb)
Plumb)
Plumb)
Plumb)
Plumb)
Handle
in
mm
5-3/8
136
Safety Protection - We’ve
got you covered!
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Tools
10-3/4"
Level accuracy of 0.0005 in/in (0.5 mm/m)
Aluminum structure for increased durability
Top-read center vial for easy readability
Block vials for maximum accuracy and durability
Highly visible accents to easily find level on work-site
Shock absorbing end caps and overall design to maintain accuracy
Superior magnetic holding power (Magnetic versions only)
Hang hole for easy storage. Hand hole with soft grip for comfort
Seamless one-piece extrusion for rugged use
Milled working surface for improved accuracy
Non-marring side bumpers for use against finished surfaces
Abrasives
Base Length
46-053
•
•
•
•
•
•
•
•
•
•
•
OnSite
Supply
Part No.
FatMax® Level
Pipe
Hangers
• Rafter layout square with our exclusive
adjustable arm
• Ideal for marking repetitive cuts accurately
• Black body with yellow graduations for
maximum readability in all light conditions
• Heavy duty aluminum construction is
lightweight yet durable
• Common/Jack and Hip/Valley scales
• Can be used as a saw guide, bevel, or
protractor
Threaded
Rod
7"
16"
12"
12"
Safety
Yellow
Yellow
Yellow
Yellow
Hartford, CT
800-969-0285
445
Rentals
46-323 English
46-131 English/Metric
46-028 English
46-123 English
Fasteners
Layout / Finishing Tools / LAser Layout Tools
Anchors
FatMax® Chalk Line Reel
Plastic Handle Putty Knives
• 3:1 gear drive for faster rewind
• Holds up to a 4 oz bottle of
Stanley® chalk
• Chalk line has two times the
tensile strength of traditional lines
• Locking button holds string in place
• Water resistant case with
rubber grips for comfort
• Steel blade hardened, tempered
and polished
• Full tang blade permanently
fastened to shatter-resistant
nylon handle
Strut
Part No.
Feet
47-140
100
Length
Meter
30
FatMax® Chalk Line Reel
3 Piece Layout Set
Threaded
Rod
• 100 ft FatMax® chalk line reel with a 4
oz bottle of blue chalk and aluminum
line level
Part No.
Feet
47-681
100
Length
Meter
Part No.
28-140
28-240
28-141
28-241
28-142
28-242
Pipe
Hangers
Tools
Feet
47-200
100
30
Length
Meter
30
Abrasives
• High grade chalk in two vivid colors
• Packed in plastic canister
47-803
47-804
47-917
47-919
Chalk Color
8 oz
8 oz
2.2 lb/35 oz
2.2 lb/35 oz
Blue
Red
Blue
Red
OnSite
Supply
Brass Plumb Bob
Safety
• For use in framing, deck building, plumbing,
transit location and construction applications
• Screw top to easily attach string to center of plumb
• Polished lacquered solid brass construction
resists rust
• Long slender profile for easy storage
• Replaceable, hardened, steel tip for longer life
• Additional tip included on 8 oz and 16 oz sizes
• Thru hole for easy tightening
Rentals
Part No.
oz
Size
46-969
46-973
4
8
446
32
32
38
38
51
51
•• Cross line and plumb points
all in one easy-to-use laser
•• Locking mechanism (pendulum
lock) increases durability and
preserves calibration.
•• Locked line mode allows for
more complicated layouts;
i.e., sloped areas, tile
patterns
•• Audible out-of-level alert
•• Rugged rubber housing
protects precision laser
components.
•• Built-in 1/4-20 thread for
tripod
Chalk Refills
Part No. Size
1-1/4
1-1/4
1-1/2
1-1/2
2
2
RL2+ CrossPlumb® Laser
Combines Cross Beams and Plumb Lines
• Shatter resistant polypropylene case
• Easy to fill
• Free wheeling crank mechanism
Part No.
Stiff
Flexible
Stiff
Flexible
Stiff
Flexible
Blade Width
in
mm
Horizontal & Vertical Layout
Chalk Line Reels
Blade Type
SPECIFICATIONS
Recommended Use: Up to 100' indoors / 165' Outdoors
with optional detector
Accuracy:
±1/8" @ 30'
Power supply:
3 AA batteries
Cross Line:
130° horizontal & 140° vertical fan
angles
Plumb Beam:
For floor-to-ceiling transfer
Manual Mode:
Lock line to to match any angle
between two points
Pulse Mode
For use with optional detector
Self Leveling Range: ±5°
Size:
4.5" x 2.25" x 3.875"
Operating Time:
25 Hrs. 1-beam / 12 hrs. 2-beam
Part No.
RL2+
Description
Cross PLumb Laser
gram
113
226
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Horizontal & Vertical Layout
Fasteners
Laser Layout Tools
PLS180 TOOL
Anchors
Horizontal-Vertical Layout
This plumb, level and square laser line tool is brighter than most rotary lasers at a fraction of
the cost. Fast, accurate and portable, the PLS180 Palm Laser saves you time and money when
your bubble vial level or rotary laser is too cumbersome or too limited for the job.
PLS SLD Detector
Strut
Exterior layout in your pocket. The PLS180, with our exclusive PLS SLD detector, is a simple, easy solution for short
and mid-range exterior horizontal and vertical layout tasks.
Accuracy:
+/- 1/8" @ 30'
Weight:
1.7 lbs.
Power supply:
3 AA batteries
Dimensions:
2" x 2-7/8" x 3-3/8"
Fan Angle
180o
Range:
100'
Self Leveling Range: 6°
Operating Time:
+30 Hrs. Continuous
Class II Laser Product
The PLS180 Tool Includes:
PLS180 Laser Unit • Compact Carrying Case • PLS180 Pouch
Wall Bracket • Operating Manual • Batteries
The PLS180 System Includes:
Threaded
Rod
PLS180 SPECIFICATIONS
PLS180 Laser Unit • Compact Carrying Case • PLS180 Pouch
Wall Bracket • PLS SLD Detector • Operating Manual • Batteries
Point-to-Point Alignment
Horizontal & Vertical Layout
Pipe
Hangers
PLS3 TOOL
Tools
3-Way Point-to-Point
Alignment Information
DW087K Self-Leveling Line Laser
Provide Horizontal and Vertical Layout
Accurate to +/- 1/8" @ 30' for level applications
Built-in magnetic pivot bracket mounts easily on metal surfaces
Overmolded housing for jobsite durability
1-button operation and control panel for ease of use.
PLS3 Laser Unit • Carrying Pouch • Floor Stand • Wall Bracket •
Operating Manual • Batteries
SPECIFICATIONS
Accuracy:
±1/8" @ 30'
Power supply:
3 AA batteries
Range (Indoor):
50'
Self Leveling Range: 5°
+30 Hrs. Continuous
Operating Time:
Class II Laser Product
Part No.
DW087K
Description
Self-Leveling Line Laser, incl. Kit Box
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
PLS3X SPECIFICATIONS
Accuracy:
<1/4" @ 100'
Weight:
12 oz.
Power supply:
3 AA batteries
Dimensions:
1-1/2" x 4-1/2" x 3-1/8"
Range:
100' ±
Self Leveling Range: +/- 6°
Operating Time:
+30 Hrs.
Class II Laser Product
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
OnSite
Supply
The PLS3 System Includes:
447
Rentals
•
•
•
•
Abrasives
Lay out reference points faster than
traditional labor intensive methods.
No more swinging plumb bobs.
Plumb instantly from floor to ceiling
or from 50 feet off the ground! Use
PLS as your partner on the jobsite.
Self-leveling: no time wasted on
bubble vials. Turn it on and go to
work. Take clear, stable reference
ponts indoors and outdoors.
Fasteners
Laser Layout Tools
Point-to-Point Alignment
Rotary Lasers
Anchors
Strut
PLS5 TOOL
5-Way Point-to-Point Alignment Information
Threaded
Rod
Lay out reference points faster than traditional labor intensive
methods. No more swinging plumb bobs. Plumb instantly from
floor to ceiling or from 50 feet off the ground! Use PLS as your
partner on the jobsite. Self-leveling: no time wasted on bubble
vials. Turn it on and go to work. Take clear, stable reference ponts
indoors and outdoors.
The PLS5 System Includes:
Pipe
Hangers
PLS5 Laser Unit • Compact Carrying Case • Floor Stand •
Magnetic Wall Bracket • Pendulum Layout Target • Operating
Manual • Batteries
Tools
PLS5 SPECIFICATIONS
Accuracy:
<1/8" @ 100'
Weight:
1.7 lbs
Power supply:
3 AA batteries
Dimensions:
2-1/2" x 6-1/2" x 4-1/4"
Range:
100'
Self Leveling Range: +/- 8°
Operating Time:
+30 Hrs. Continuous
Class II Laser Product
PLS HVR 505R Mid-Range Rotary Laser Tool
A compact, mid-range rotary laser designed for light commercial,
residential and remodeling projects. Horizontal and vertical
application: the HVR 500 is versatile for short and mid-range
layout with an accuracy of 1/8" @ 100'.
PLS HVR 505R SPECIFICATIONS
Accuracy:
1/8" @ 100'
Power supply:
NiMh
Dimensions:
5" x 4-3/4" x 6"
Range:
500'
Self Leveling Range: 5°
Class II Laser Product
The PLS HVR 505R System Includes:
PLS HVR 505R Laser Unit • Carrying Case • PLS RC 505 Remote
• Ceiling Bracket • PLS HVD 505 Detector • Operating Manual •
NiMh Batteries
360° Rotary Laser
PLS360 360° Rotary Laser Tool
Abrasives
Fully self leveling, the PLS360 provides a continuous 360 degree
line of reference. It also offers one button set up for indooroutdoor applications. Unlike rotary lasers with sensitive moving
parts, this compact, bright and durable tool has no complicated
features or multiple knob adjustments.
PLS SLD Detector
OnSite
Supply
Exterior layout in your pocket.
PLS SLD detector, is a simple,
easy solution for short and midrange exterior horizontal and
vertical layout tasks.
PLS360 SPECIFICATIONS
Safety
The PLS360 System Includes:
PLS360 Laser Unit • Compact Carrying Case • Wall Bracket PLS
SLD Detector • Operating Manual
Rentals
448
Hartford, CT
800-969-0285
Accuracy:
1/8" @ 100'
Weight:
2 lbs.
Power supply:
3 D batteries
Dimensions:
3-1/8" x 5" x 4-1/2"
Range:
250'
Self Leveling Range: +/- 6°
Operating Time:
+35 Hrs.
Class II Laser Product
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Rotary Lasers
Anchors
PLS HVR 1000 Long-Range Rotary Laser Tool
Fasteners
Laser Layout Tools
This proven rotary laser, made in Germany, is fully self-leveling with
an accuracy of 3/32" @ 100'. 1000 foot radius with horizontal and
vertical applications. Ideal for commercial acoustic or drywall and
general construction applications.
PLS HVR 1000 SPECIFICATIONS
Accuracy:
3/32" @ 100'
Power supply:
NiMh
Dimensions:
5-1/2" x 5-1/2" x 6-3/4"
Range:
1000'
Self Leveling Range: 5°
Class III Laser Product
Strut
The PLS HVR 1000 System Includes:
Threaded
Rod
PLS HVR 1000 Laser Unit • Carrying Case • RC 1000 Remote •
PLS HVD 1000 Detector • Ceiling Bracket • Operating Manual •
NiCd Batteries
Pipe
Hangers
DW079KDT Self-Leveling Rotary Laser
Interior/Exterior with Detector
Abrasives
Tools
• Fully automatic horizontal & vertical self leveling with outof-level shutoff eliminates user error, ensures accuracy, and
reduces set up time
• Multi-voltage adapter accepts all DEWALT batteries 9.6V - 18V
• Protected rotary head & weatherproof design deliver interior
& exterior jobsite durability
• Bright, sharp, high power beam delivers maximum visibility,
even over long distances
• Remote control operated scan mode creates a "laser chalkline"
between two points for an extremely bright beam over long
distances
• Wireless (IR) remote control operation so that one person can
setup and aim the laser over long distances
• Digital laser detector detects rotary laser beam over long
distances or in bright light conditions.
• Includes: Self-leveling rotary laser, Digital laser detector, Wall
mount, Wireless (IR) remote control, 18V battery, 1 hour
charger, laser target card, Laser enhancement glasses, Heavyduty kit box (w/ padded interior) and construction tripod.
SPECIFICATIONS
DW079KDT
Description
Safety
Part No.
OnSite
Supply
Accuracy:
1/8" @ 100'
Power supply:
All 9.6 - 18V DeWalt Batteries
Rotation Speed:
0, 60, 250, & 600 rpm
Range (Indoor):
200' diameter
Range w/Detector: 2000' diameter
Self Leveling Range: ±5°
Operating Time:
+30 Hrs. Continuous
Weight:
6.5 lbs.
Laser Class:
Class IIIa (<5mW) @ 635nm
Self-Leveling Laser Combo Kit
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
449
Rentals
Fasteners
Generators / Compressors / Pressure Washers
4400 Watt Commercial Generator with
18V Battery Start - DG4400B
6300 Watt Commercial Generator with
18V Battery Start - DG6300B
Anchors
Features:
Features:
•
•
•
•
Strut
•
•
•
•
•
DEWALT 18 volt
battery start.
Battery and charger come
with the generator
DEWALT 270cc (9hp) OHV engine
provides worksite reliability
20% more starting watts than
generators in its class
Proper 120v and 240v outlets for
jobsite applications
Worksite tested frame with panel protection bars for increased durability
Super quiet muffler reduces engine noise
Idle control saves fuel and reduces noise
Low oil shut-off protects engine
•
•
•
•
•
•
•
DEWALT 18
volt battery
start. Battery and
charger come with
the generator
DEWALT 389cc (13hp) OHV
engine provides worksite
reliability
20% more starting watts
than generators in its class
Proper 120v and 240v outlets
for jobsite applications
Worksite tested frame with panel
protection bars for increased durability
Super quiet muffler reduces engine noise
Idle control saves fuel and reduces noise
Low oil shut-off protects engine
Threaded
Rod
Pipe
Hangers
Heavy-Duty 1.1 HP Continuous
4 Gal Electric Wheeled DollyStyle Air Compressor with Panel
- D55154
Tools
Features:
•
•
•
•
•
Abrasives
•
•
•
•
•
4.0 CFM delivered at 90 PSI pump
Oil lubricated pump improves durability
Cast iron cylinder enhances pump life
10” pneumatic wheel & handle kit
Top load panel with positioning holes allows
unit to transport loads up to 100 lbs
High-flow regulator for increased performance
Dual universal quick couplers
Ball valve drain allows for quick and thorough tank draining
Convenient cord wrap for easy storage
Dual soft start valves
Includes:
OnSite
Supply
•
•
Heavy-Duty 1.5 HP 8 Gallon
Electric Wheeled Portable
Compressor - D55170
Heavy-Duty 9 HP 17 Gallon Gas
Wheeled Portable Compressor D55275
Features:
Features:
•
•
•
•
•
•
6.5 CFM delivered @ 100 PSI enables quick
recovery
Twin cylinder, cast iron, oil lubricated pump
with Emglo’s 50 years of proven durability
and reliability
Low profile design for easy maneuverability
On/Off constant run design for reduced
breaker tripping
Fully-Pneumatic tire improves worksite
mobility
•
•
•
•
•
Includes:
•
•
•
DEWALT Synthetic Compressor Oil
3/8” NPT pressure regulator
DEWALT compressor oil
Control panel with (2) universal quick
couplers
16.2 CFM delivered @ 100 PSI for high
volume usages
Quad cylinder, cast iron, oil lubricated
pump with Emglo’s 50 years of proven
durability and reliability
9 HP Honda OHV GX gas engine provides
proven reliability and durability
Dual wheels make maneuvering easier on
the worksite
Ball valve drain allows for quick and thorough tank draining
ASME coded 17 gallon OSHA recognized tank
Automatic idle control for reduced fuel
consumption
Includes:
•
•
DEWALT Synthetic Compressor Oil
3/8” NPT pressure regulator
Heavy-Duty 3750 Max PSI, 4.0 Max
GPM Pressure Washer - DP3900
Includes:
Safety
•
•
•
•
•
Rentals
450
5 spray nozzles
DEWALT Heavy-Duty Professional Spray Gun
34” stainless steel lance
75’ x 3/8” Non-marking steel braided hose
34” Extension Lance
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
All items on this page
are available for rental!
Call for details
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
85-388
85-404
85-957
21-pc.
Socket Set
20-pc.
Socket Set
17-pc.
Socket Set
1/4" Drive 6 Point
3/8" Drive 12 Point
1/2" Drive 6 point
Fasteners
Anchors
Socket Sets
3/16"
Socket
Part No.
GW-1607
7/32"
Socket
91-132
3/8"
Socket
J5414H
GW-1608
1/4"
Socket
91-138
7/16"
Socket
Size
Description
Size
7/16"
Socket
J5416H
1/2"
Socket
9/16"
Socket
Socket
GW-1609
9/32"
Socket
91-151
1/2"
Socket
J5418H
GW-1610
5/16"
Socket
91-186
9/16"
Socket
J5420H
5/8"
GW-1611
11/32"
Socket
91-283
5/8"
Socket
J5422H
11/16"
Socket
GW-1612
3/8"
Socket
J5222
11/16"
Socket
J5424H
3/4"
Socket
GW-1614
7/16"
Socket
J5224
3/4"
Socket
88-769
13/16"
Socket
7/8"
Socket
15/16"
Socket
GW-1616
1/2"
Socket
J5226
13/16"
Socket
88-770
GW-1508
1/4"
Deep Socket
J5228
7/8"
Socket
88-771
GW-1509
9/32"
Deep Socket
91-286
3/8"
Deep Socket
88-773
1"
Socket
1-1/16"
Socket
Threaded
Rod
Description
GW-1606
Pipe
Hangers
Contents:
Part No.
GW-1510
5/16"
Deep Socket
91-287
7/16"
Deep Socket
88-774
GW-1511
11/32"
Deep Socket
91-288
1/2"
Deep Socket
88-775
1-1/8"
Socket
GW-1512
3/8"
Deep Socket
91-289
9/16"
Deep Socket
86-458
1-3/16"
Socket
GW-1514
7/16"
Deep Socket
91-296
5/8"
Deep Socket
88-776
1-1/4"
Socket
GW-1516
1/2"
Deep Socket
91-297
11/16"
Deep Socket
86-415
15" Flex Handle Ratchet
3/8" Drive Extension - 10"
3/8" Pear Head Ratchet
86-004
1/4" Spinner Handle
91-298
3/4"
Deep Socket
86-408
86-011
1/4" Universal Joint
91-302
13/16"
Deep Socket
89-819
86-006
1/4" Drive Extension - 3"
86-206
3/8" Drive Extension - 3"
86-007
1/4" Drive Extension - 6"
86-207
3/8" Drive Extension - 6"
89-817
1/4" Pear Head Ratchet
89-818
3/8" Pear Head Ratchet
Part No.
Size
J5412
3/8"
J5414
7/16"
J5416
1/2"
Part No.
Size
Part No.
Size
J5418
9/16"
91-284
5/16"
J5316
1/2"
J5420
5/8"
91-286
3/8"
J5318
9/16"
J5422
11/16"
91-287
7/16"
J5320
5/8"
J5424
3/4"
91-288
1/2"
J5322
11/16"
J5426
13/16"
91-289
9/16"
J5324
3/4"
J5428
7/8"
91-286
5/8"
J5326
13/16"
J5430
15/16"
91-297
11/16"
J5328
7/8"
J5432
1"
91-298
3/4"
J5330
15/16"
J5434
1-1/16
91-302
13/16"
J5332
1"
J5436
1-1/8"
88-972
7/8"
J5440
1-1/4"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
OnSite
Supply
1/2" Drive
Deep Sockets
- 12 Point
Safety
3/8" Drive
Deep Sockets
- 12 Point
1/2" Drive
Sockets - 12
Point
Tools
Contents:
Abrasives
Description
Size
451
Rentals
Part No.
Strut
Contents:
Fasteners
Impact Socket Sets / Ratchets
Anchors
85-960
13-pc. Impact Socket Set
85-966
19-pc. Impact Socket Set
85-969
19-pc. Impact Socket Set
1/2" Drive - 6 point
3/4" Drive - 6 point
1" Drive - 6 point
Contents:
Strut
Threaded
Rod
Pipe
Hangers
Part No.
Size
Contents:
J7416H
1/2"
Part No.
Size
Part No.
Size
J7418H
9/16"
90-962
13/16"
90-974
1-7/8"
J7420H
5/8"
J07514
7/8"
90-973
1-15/16"
J7422H
11/16"
90-965
15/16"
90-975
2"
J7424H
3/4"
90-918
1"
90-976
2-1/16"
J7428H
7/8"
J07517
1-1/16"
90-980
2-1/8"
J7430H
15/16"
90-958
1-1/8"
90-984
2-3/16"
J7432H
1"
90-957
1-1/4"
90-978
2-1/4"
87-523G
1-16"
90-966
1-5/16"
90-987
2-5/16"
91-530
1-1/8"
90-964
1-3/8"
90-986
2-3/8"
91-548
1-3/16"
90-968
1-7/16"
90-989
2-7/16"
91-531
1-1/4"
90-956
1-1/2"
90-977
2-1/2"
89-240
Extension impact - 5"
90-970
1-9/16"
90-993
2-9/16"
90-967
1-5/8"
90-988
2-5/8"
90-959
1-11/16"
90-981
2-11/16"
90-936
1-3/4"
90-985
2-3/4"
90-960
1-13/16"
90-982
2-13/16"
90-969
1-7/8"
90-992
2-7/8"
90-961
1-15/16"
90-983
2-15/16"
90-971
2"
90-994
3"
Not in the Catalog?
Tools
Call Us
Sourcing products is our specialty.
Be it obsolete or the
latest invention, we’ll find it for you.
Contents:
Abrasives
3/4" Drive
Sockets - 12
Point
OnSite
Supply
Part
No.
Size
Part
No.
J5524
3/4"
J5546
1-7/16"
J5526
13/16"
J5548
1-1/2"
J5528
7/8"
J5550
1-9/16"
J5530
15/16"
J5552
J5532
1"
J5534
85-990
14-pc. SAE
Combination
Wrench Set
Size
Pear Head Ratchets
Safety
Part
No.
Size
Part
No.
1-5/8"
86-833
3/8"
86-840
13/16"
J5554
1-11/16"
86-834
7/16"
86-841
7/8"
1-1/16"
J5556
1-3/4"
86-835
1/2"
86-842
15/16"
J5536
1-1/8"
J5558
1-13/16"
86-836
9/16"
86-843
1"
J5538
1-3/16"
J5560
1-7/8"
86-837
5/8"
86-844
J5540
1-1/4"
J5564
2"
86-838
11/16"
J5542
1-5/16"
J5568
2-1/8"
86-839
3/4"
J5544
1-3/8"
J5572
2-1/4"
J5576
2-3/8"
Rentals
452
Hartford, CT
800-969-0285
Size
Part No.
Drive
Pear Head Ratchets
89-817
1/4"
89-818
3/8"
89-819
1/2"
1-1/16"
88-907
3/4"
86-845
1-1/8"
Flex Handle Drive
86-846
1-1/4"
34986B
3/8"
86-415
1/2"
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Drive
Length
1/4"
3"
GW-9899
1/4"
6"
34988
3/8"
3"
34987
3/8"
6"
Adapters
86-214
86-211
34984
3/8"
11"
Part No.
Drive
49966
1/2"
5"
86-211
3/8"
49990
1/2"
10"
86-411
1/2"
69993
3/4"
4"
69995
3/4"
8"
Part No.
Drive
Description
86-211
3/8"
Female x 1/4"
Male Adapter
86-411
1/2"
Female x 3/8"
Male Adapter
Threaded
Rod
86-411
86-414
Wrenches
Adjustable Spud Wrench - Clik-Stop®
• Large jaw opening fits all nuts and bolts up to 11/2 inches
• Square jaw opening provides greater strength and better fit
• Eliminates the need for carrying several fixed size wrenches
86-833G
86-834G
86-835G
86-836G
86-837G
86-838G
86-839G
86-840G
86-841G
86-842G
86-843G
86-844G
86-845G
86-846G
89-715G
89-716G
89-717G
89-718G
89-719G
89-720G
89-711G
89-712G
89-713G
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-5/8"
1-3/4"
1-13/16"
1-7/8"
2"
Adjustable Wrenches
Product
ID No.
Max.
in
Weight
(lb)
712SC
1-1/2"
16
2.46
Tools
Part No. Description
Structural Wrenches - Offset Head
• Black oxide finish
• Long offset handle provides
greater leverage and clearance
for knuckles and obstructions
• Hardened tapered handle
aligns bolt and rivet holes
• Openings are precision
broached for proper fit
Abrasives
Part No. Description
Pipe
Hangers
Combination Wrenches
Strut
Part No.
GW-9898
Universal Joints
Anchors
Drive Extensions
Fasteners
Ratchet Accessories / Wrenches
Part
No.
Max.
Jaw Cap.
Length
(in)
Weight
(lb)
704
706
708
710
712
715
718
724
1/2"
15/16"
1-1/8"
1-5/16"
1-1/2"
1-11/16"
2-1/16"
2-7/16"
4
6
8
10
12
15
18
24
.12
.25
.48
.80
1.30
3.06
5.65
8.60
Washington D.C.
877-419-2755
C904A 3/4
C905
7/8
C906B 1
C907 1-1/16
C907A 1-1/8
C908 1-1/4
C908A 1-5/16
C909 1-7/16
C90A 1-1/2
C910 1-5/8
C912
2
C
D
E
F
L
Weight
lb
1-7/8
2-3/16
2-3/16
2-7/16
2-7/16
2-3/4
2-3/4
3-1/8
3-1/8
3-5/8
4-7/16
7/16
9/16
9/16
21/32
21/32
13/16
13/16
13/16
13/16
15/16
15/16
3/4
7/8
7/8
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-5/8
1-5/8
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
3
3
3
3
3
3
11-3/4
14-1/4
14/1/4
17-1/4
17-1/4
19-1/2
19-1/2
19-1/2
19-1/2
23-1/4
23-1/4
.72
1.37
1.34
2.12
2.22
2.47
2.70
3.66
2.70
5.68
8.32
Fed’l Specs.:GGG-W-636E
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
453
Rentals
Philadelphia, PA
610-647-8070
Part No. in
Safety
• Satin finish
• Extra wide jaw capacity
• Square jaw opening provides greater strength
OnSite
Supply
Reference Measurement Key
Fasteners
Wrenches
Anchors
Offset Striking Wrenches Heavy-Duty-12 pt.
Strut
Threaded
Rod
• Black oxide finish
• Large striking surface for
surer blow contact and
more efficient transmittal of
force to fastener
• Short handle permits use in
close quarters
• Box opening designed to
remain on fastener when
wrench is struck
• For use where extreme force
is necessary to loosen or set
large fasteners
• Heavy box walls provide
Reference Measurement Key
greater torque transmission
• Offset handle clears obstruction
in
Part No.
Pipe
Hangers
Tools
Abrasives
2617SW 1-1/16
2618SW 1-1/8
2620SW 1-1/4
2621SW 1-5/16
2623SW 1-7/16
2624SW 1-1/2
2626SW 1-5/8
2627SW 1-11/16
2628SW 1-3/4
2629SW 1-13/16
2630SW 1-7/8
2632SW
2
2634SW 2-1/8
2635SW 2-3/16
2636SW 2-1/4
2637SW 2-5/16
2638SW 2-3/8
2640SW 2-1/2
2641SW 2-9/16
2642SW 2-5/8
2644SW 2-3/4
2647SW 2-15/16
2648SW
3
2650SW 3-1/8
C
D
E
L
Weight
lb
1-11/16
5/8
15/16
8-1/2
1.79
1-11/16
5/8
15/16
8-1/2
1.75
1-7/8
13/16 13/16
10-3/4 2.95
1-7/8
13/16 13/16
10-3/4 2.89
2-3/16
1
1-1/2
12
4.53
2-3/16
1
1-1/2
12
4.53
2-13/32 1-1/8
1-1/2
12-1/4 4.58
2-13/32 1-1/8
1-1/2
12-1/4 4.44
2-19/32 1-3/16 1-9/16 13-7/16 6.58
2-21/32 1-3/16 1-9/16 13-7/16 6.51
2-27/32 1-1/4 1-21/32 13-7/16 6.58
2-27/32 1-1/4 1-21/32 13-7/16 6.60
3-1/8
1-1/2
2
13-7/8 8.62
3-3/8
1-1/2
2
13-1/2 8.38
3-3/8
1-1/2
2
13-1/2 8.38
3-3/8
1-1/2
2
13-1/2 8.06
3-3/8
1-1/2
2
13-1/2 8.08
4
1-1/2
2-1/4
13-1/2 9.52
4
1-1/2
2-1/4
13-1/2 9.52
4
1-1/2
2-1/4
13-1/2 9.63
4
1-1/2
2-1/4
13-1/2 9.04
4-7/16
1-7/8
2-5/8
16
12.64
4-7/16
1-7/8
2-5/8
16
13.13
4-7/16
1-7/8
2-5/8
16
12.72
Fed’l specs.:GGG-W-636E
Big Dawg™ Foot Pound
Torque Wrenches - Ratchet Head
•
•
•
•
•
•
45 Tooth gear/floating pawl design for small 6.8° arc swing
13% smaller head for access in tight work areas
Reversing lever designed for quick, one hand operation
10-80 ft/lb thru 140-700 ft/lb
21-116 Nm thru 217-976 Nm
Calibrated ± 3% of torque reading clockwise and ± 6%
counterclockwise at 20% to 100% full scale
• Certified wrenches to ± 2% one direction available upon
request
Part
No.
Torque Range
ft/lb
Nm
6006F 10-80 21-116
6012F 20-100 34-142
6008F 10-80 21-116
6016F‡ 30-150 47-210
6014F 50-250 75-345
6018AB 60-300 102-428
6020AB 90-600 142-834
6022B† 140-700 217-976
Graduations Drive
ft/lb Nm Size Length
Wt. Storage
lb. Box
.5
.5
.5
1
1
2
2
2
2.00 6003PB
2.40 6003PB
2.00 6003PB
3.97 6004PB
4.68 6005PB
9.70 6007PB
11.60 6007PB
14.50 6007PB
.68
.68
.68
1.36
1.36
1.7
1.7
1.7
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1
16-7/16"
16-7/16"
16-7/16"
20-3/4"
26-1/4"
32-11/16"
41-1/2"
48"
† Secondary Scale on Newton Meters
‡ Meets Ergonomic Criteria
ANSI Spec.: B107.14M
ISO6789
12 Piece
Standard Drive Set
• Weight: 1.50 lb
OnSite
Supply
Part No. Contents Description
7-PC High Access Ratcheting
Wrench Set
• Weight: 3.00 lb
Safety
Part No.
Contents
Size
BW-1250
BW-1210
BW1212
BW-1214
BW-1216
BW-1218
BW-1220
BW-1222
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
Rentals
454
Hartford, CT
800-969-0285
1412NB GW-1606 6 Pt. Std. Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Std. Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Std. Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Std. Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Std. Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Std. Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Std. Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Std. Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Std. Socket 1/4" Drive 1/2"
GW-9898 1/4" Drive 3" Extension
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Knurled Ratchet
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
26-Piece Standard Drive
Set
1226-S
3/8" Deep Socket
7/16" Deep Socket
11/2" Deep Socket
9/16" Deep Socket
5/8" Deep Socket
11/16" Deep Socket
3/4" Deep Socket
13/16" Deep Socket
7/16" Standard Socket
1/2" Standard Socket
9/16" Standard Socket
5/8" Standard Socket
11/16" Standard Socket
3/4" Standard Socket
13/16" Standard Socket
3/8" Standard Socket
7/8" Standard Socket
Round Head, Knurled, Reversible Ratchet
3" Extension
6" Extension
14-Piece Full Polish Combination
Wrench Set
40614
40616
40618
40620
40622
40624
40126
40128
40130
40132
40134
40136
40140
40316
40318
40320
40322
40324
40326
40328
40330
40332
49966
49964
49988B
49945B
7/16", 6 Pt. Std. Socket
1/2", 6 Pt. Std. Socket
9/16", 6 Pt. Std. Socket
5/8", 6 Pt. Std. Socket
11/16", 6 Pt. Std. Socket
3/4", 6 Pt. Std. Socket
13/16", 12 Pt. Std. Socket
7/8", 12 Pt. Std. Socket
15/16", 12 Pt. Std. Socket
1", 12 Pt. Std. Socket
1-1/16", 12 Pt. Std. Socket
1-1/8", 12 Pt. Std. Socket
1-1/4", 12 Pt. Std. Socket
1/2", 12 Pt. Deep Socket
9/16", 12 Pt. Deep Socket
5/8", 12 Pt. Deep Socket
11/16", 12 Pt. Deep Socket
3/4", 12 Pt. Deep Socket
13/16", 12 Pt. Deep Socket
7/8", 12 Pt. Deep Socket
15/16", 12 Pt. Deep Socket
1", 12 Pt. Deep Socket
5" Extension
2" Extension
1/2" Drive Flex Handle
1/2" Drive, Round Head, Knurled, Reversible Ratchet
Abrasives
• Weight: 9.90 lb
7-Piece Combination Screwdriver Set
Contents
Size
BW-14PT
BW-1159FP
BW-1160FP
BW-1161FP
BW-1162FP
BW-1163FP
BW-1164FP
BW-1165FP
BW-1166FP
BW-1167AFP
BW-1167FP
BW-1168FP
BW-1170FP
BW-1172FP
BW-1173FP
Pouch
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/8"
1-1/4"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
• Weight: 2.16 lb
OnSite
Supply
Item No.
Threaded
Rod
3820-S 30412
30414
30416
30418
30420
30422
30424
30426
30014
30016
30018
30020
30022
30024
30026
30012
30028
31945B
34988
34987
Pipe
Hangers
Part No. Contents Description
Tools
Part No. Contents Description
Strut
•• 1/2" Drive; 6 and 12 Point
Sockets
•• Weight: 14 lb.
Part No. Contents
Description
Tip
ST-1072 ST-1004S Slotted
1/4
ST-1006S Slotted
5/16
ST-1008S Slotted
3/8
ST-1145S Slotted Stubby 1/4
ST-1081S Phillips®
1 Pt.
ST-1082S Phillips®
2 Pt.
ST-1140S Phillips® Stubby 2 Pt.
Pouch
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Blade
Length Blade Shank
4
6
8
1-1/2
3
4
1-1/2
-
-
-
-
+
+
+
•
•
•
•
•
•
•
455
Safety
•• 3/8" Drive; 12 Point Sockets
•• Weight: 5.50 lb
Rentals
20-Piece Standard Drive Set
Fasteners
Wrenches / Screwdrivers
Fasteners
Vise-Grip Tools
Anchors
Vise-Grip®
Vise-Grip®
Locking Curved Jaws/
Wire Cutter Plier
Locking Welding Clamp
This clamp holds parts in proper
alignment - even when material is
not identical in thickness. Positive
lock leaves hands free. Special
deep-throated U-shaped jaws provide perfect visibility and
working space.
Strut
Part No.
Length
Jaw Width
Throat Depth
9R
9
2-3/4
1-5/8
Wire cutter will handle anything
up to a 1/4” bolt. One bite will
cut smaller wires and progressive bites cut through the big wires.
The tool is heat-treated for maximum toughness and durability. A
simple hand squeeze can put one ton of pressure between jaws
assuring you of a hold tight, won’t slip grip. A quick-adjust speed
screw lets you fine tune your adjustment with only one hand.
Available in 7” and 10” lengths. Ten and seven inch length also
available without wire cutter (Models 7CR & 10CR).
Threaded
Rod
Vise-Grip®
Part No.
Length
Locking Chain Clamp
7WR
10WR
7CR
10CR
7
10
7
10
Holds and locks around any
size or shape - anything the
chain can be wrapped around.
Adjusts to ratchet action
in either direction. Won’t slip, won’t crush thin-walled pipe.
Replacement chain and extension chain available.
Pipe
Hangers
Part No.
Description
20R
20 Ext
20 Rep
Locking Chain Clamp
18” Extension Chain
18” Replacement Chain
Made of finest grade alloy steel
with heavy-duty jaws that grip work of all shapes. The tool locks
to the work leaving both hands free. Powerful jaws and teeth
hold on tight and won’t slip. Change adjustments quickly with the
specially designed speed screw. Available 7” and 10” length.
Tools
Part No.
Abrasives
For bending, forming and
crimping sheet metal. Locks
to your work with a powerful
non-slip grip. Micro-adjusting screw and easy release trigger are
standard features.
Part No.
Length
Jaw Width
Throat Depth
8R
8
3-1/8
1-3/4
OnSite
Supply
Vise-Grip®
Long Nose with
Wire Cutter Plier
Safety
The tapered nose is
ideal for delicate work,
hobbies, tight spaces, electronics and holding of small parts.
Pliers features the same wire-cutting power as the curved-jaw
model. The easy-release trigger snaps jaws open instantly for the
next application. A quick adjust speed screw makes fine tuning
easier and quicker. Available in 6” and 9” lengths.
Part No.
Length
Jaw Thick
Jaw Adjust.
6LN
9LN
6
9
5/32 Tip
3/16 Tip
0-2-1/4
0-2-7/8
Rentals
Hartford, CT
800-969-0285
Jaw Adjust.
0-1-5/8
0-1-7/8
0-1-5/8
0-1-7/8
Vise-Grip®
Locking Straight Jaws
Plier
Vise-Grip®
Sheet Metal Tool
456
Jaw Thick
5/16
7/16
5/16
7/16
Length
7R
10R
7
10
Jaw Thick
Jaw Adjust.
1/2
5/8
0-1-1/8
0-1-5/8
Vise-Grip®
Locking C-Clamp
Micro adjustment for
quick pre-adjusting
and repeat clamping.
Jaws open wide for versatility. A powerful locking mechanism
guarantees no slippage. Locking C-Clamps are engineered for
balance and ease of handling. Locks work with one hand squeeze
and have an easy-release trigger. Indispensable tool for welding
sheet metal or woodworking. Your choice of regular (R) or swivel
pad (SP) tips.
Part No.
Length
Jaw Adj.
Throat Height
Throat Depth
4R
5R
11R
18R
24R
6SP
11SP
18SP
24SP
4
6
11
18
24
6
11
18
24
1-5/8
2-1/8
4
8
10
2-1/8
4
8
12-1/2
1-7/8
2-1/4
3-3/4
4-1/2
4-1/2
2-1/4
3-3/4
4-1/2
4-1/2
1-1/4
1-1/6
2-5/8
9-1/2
15-1/2
1-1/2
2-5/8
9-1/2
15-1/2
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Length
Jaw (in.)
Adjustments
(in.)
Capacity
(in.)
480
460
442
440
430
422
420/421
415
426
424
20-1/4
16
12
12
10
9-1/2
9-1/2
10
6-1/2
4-1/2
5-1/2 Big Azz
4-1/4
2-1/4 Curved
2-1/4
2
1-1/2 Curved
1-1/2
2
Smooth
7/8
1/2
12
8
7
7
7
5
5
7
5
3
Strut
Model
Right angle teeth grip in all directions. Undercut Tongue and
Groove, won’t slip. PermaLock Fastener eliminates nut and
bolt failure. Reinforcing edge that minimizes stress breakage.
Channellock Blue comfort grips
Tool Belts
14"
15"
6"
6"
X-Large Nylon Equipment Bag
Orange, vinylcoated nylon fabric
bag. Naugahydereinforced bottom
extends 3" up the
sides. Bottom
protected by metal
studs. Nylon-web handles extend around
bag for extra support. Wide opening steel
frame is securely riveted in top of bag.
Extra flap for storm protection.
Part No. Length
Width
Depth
5180
10"
18"
24"
Canvas Zipper Bag
White-canvas, zippered
bag. Convenient storage
for pliers, wrenches and
other tools.
Part No.
Size
5139
7-1/2" x 12"
Philadelphia, PA
610-647-8070
5417
Electrode Bag
Bull-Pin & Bolt Bags
Bolt bag with bull-pin loop
on each side. Canvas with
double bottom, 3" belt
loops or tunnel loop.
Part No.
Description
5416
Canvas, 5" x 9" x 10" D
Leather-Bottom
Bucket
This Klein bucket is more
widely used by public
utilities than any other.
Made of #1 canvas with
Cycolac top ring. Bottom
is covered with leather
reinforcement extending
3" up the sides. Inside
pocket measures 8" x 8".
Polypropylene rope handle
is reinforced with leather where it is
spliced around top ring.
Part No.
5104
Washington D.C.
877-419-2755
Size
12" Dia x 17" H
Boston , MA
800-645-6155
Part No.
Size
Belt Width
5225
32" - 48"
2-1/4"
Tools
Description
Lightweight Utility Belt
This strong
lightweight
syntheticweb quickly
adjusts for
waist sizes
through 52". The 2" wide belt will accept
tunnel-loop and slotted pouches and
holders. The tough, molded, non-metallic,
slide-action buckle provides singlehanded, quick release and adjustment.
Part No.
Size
5204
Up to 52"
Abrasives
16"
20"
Width
Part No.
OnSite
Supply
5102-16
5102-20
Depth
Tough canvas with heatresistant hard-leather bottom.
Height in front is 12"; height in
black is 15-1/2".
Broad-Head Bull Pins
A drop-forged, heat-treated bull pin which
increases efficiency by providing a larger
striking surface.
Part No.
3255
3256
Top
Bottom
Height
1-1/4"
1-1/16"
5/16"
1/4"
13"
10"
Hartford, CT
800-969-0285
457
Safety
Part No. Length
Canvas Electrode Bag
Rentals
Durable white canvas
bags, bottom and 3"
of lower sides are
covered with one-piece
Naugahyde, cemented
and lock-stitched. Bottom is protected
with steel studs. Mouth has steel frame.
Handles are harness leather. All bags have
two retaining straps and buckles. For
shoulder strap kit see P/N 5102S.
This strong
economical belt
of polypropylene
webbing has a
sliding adjuster
that allows a
quick fit through the entire range of waist
sizes up to 48". Provides easy adjustment
for changes in sizes required by heavy
winter clothing. Clasp buckle holds belt
firmly but permits easy release.
Pipe
Hangers
Adjustable Web Tool Belt
Tool Bags
Canvas Tool Bags
Threaded
Rod
Anchors
Tongue & Groove Pliers
Fasteners
Pliers / Tool Bags / Belts
Fasteners
Tool Pouches / Electric Benders
Anchors
Tool Pouches
Strut
Leather Pocket Tool Pouch
7-Pocket Multi-Purpose Tool Pouch
Perfect for carrying pliers and other tools in the
hip pocket. Prevents wear and tearing of clothes,
discomfort and possible injury.
A multi-purpose pouch, soft and pliable.
Moisture resistant to retain flexibility even after
being wet and dried. Has two large, gusseted
utility pockets, two screwdriver pockets,
hammer loop, three pliers pockets and one
chain tape thong.
Part No.
Description
Part No.
Overall Size
5111
5" x 7"
5166
5-Pocket Tool Pouch
Threaded
Rod
General-purpose pouches have an extra-large
utility pocket for assorted tools and other
items, a smaller utility pocket, three small
pockets, and a tape thong. Loops fit belts up to
2-1/4" wide. P/N 5125 is made of heavy canvas
with a heavy Ultra-Hyde™ back for user comfort
and stability. P/N 5125L is made of leather and
Ultra-Hyde™.
10-Pocket Big-Capacity Tool Pouch
Rugged, big-capacity pouch with 10 separate
pockets. Four large, gusseted utility pockets.
Two pliers pockets. Four pockets for
screwdrivers. Knife snap. Slotted pouch fits
belts up to 2" wide. Riveted and stitched.
Made of leather.
Part No. Description
Nominal Size
Part No.
5125
7-1/2” x 8-1/2”
5165
Canvas pouch with Ultra-Hyde™ back
Leather pouch, 7" x 10" tunnel loop fits belts up
to 2-1/4" wide
Nominal Overall Size
10” x 10”
Pipe
Hangers
Choose the Model that’s Best for You
Tools
Abrasives
OnSite
Supply
Safety
Smart Quad Bender® 855
Quad 854 Bender™
Quad Bender™ 853
555 Bender®
Intelligent pendant controls:
Standard (included), digital
readout and programmable
bend angles for accurate repeat bends. Deluxe (optional),
interactive control - calculates
complete layout measurements
for various types of bends.
Quad-shoe design blends 1/2”
to 2” EMT, IMC, Rigid and
Rigid aluminum conduit without
any shoe changes - no loose
parts to get lost.
No-change-out Quad-shoe design plus the high-productivity
features, capacity and flexibility of the 855 without digital
controls.
Electric bender brings you
the portability of the famous
Greenlee “triple nickel” plus
the exclusive, no-change-out
Quad-shoe technology. Handles 1” through 2” EMT, IMC,
Ridgid and Ridgid aluminum.
A landmark for design. Still a
great choice for contractors
doing extensive bending in any
single-type conduit. There’s a
shoe available for bending all
conduit types in sizes up to 2”.
Rentals
458
855
854
853
Quad-Shoe and Patented Roller System
Pivoting Bending Head
Squeeze Adjustment
Digital Controls
Programmable Controls
1”, 1-1/4”, 1-1/2”, 2” Capacity
1/2”, 3/4” Capacity*
* EMT, IMC, Ridgid Steel and Aluminum
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional
Optional
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
555
Philadelphia, PA
610-647-8070
Fasteners
Strut
Anchors
Quick Reference
Threaded
Rod
Abrasives
Carbide Burs . . . . . . . . . . . .
Cup Grinding Wheels . . . . . .
Cup Wheels . . . . . . . . . . . . .
Grinding Wheels . . . . 462 Grinding Wheels - Bench . . .
484
466
469
464
486
www.GoNefco.com
481
484
482
480
467
471
473
488
479
475
474
477
478
487
489
486
Visit Our Website!
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
• Specials
• Quotes
• Submittals
• On-Line Catalog
• On-Line Library
459
Rentals
Grinding
477
Pipe
Hangers
Abrasive Belts . . . . . . 476 Backing Pads / Accessories
. . . . . . . . . . . . . . . . . 477,
Cartridge Rolls . . . . . 483 Convolute Wheels / Unitized
Wheels . . . . . . . . . . . . . . . .
Fiber Discs . . . . . . . . . . . . .
Flap Discs . . . . . . . . . 468 Flap Wheels . . . . . . . 470 Interleaf Flap Wheels . . . . . .
Internal (Tube) Brushes
Nylon / Wire Brushes 485 Sait-Lok™/ Sait-Lok-R™ 476 Sanding Sheets . . . . . . . . . .
Shop Rolls / Hand Pads . . . .
Surface Conditioning Belts
Surface Conditioning Discs
Wire / End Brushes . . 488 Wire Wheels / Brushes 487 Wire Scratch Brushes . . . . .
Tools
Cut-Off Wheels / Chop Saw 466
Cut-Off Wheels / Gas Saw 467
Cut-Off Wheels / Accessories 465
Cutting Wheels . . . . . 463 - 464
.045 Cutting Wheels . . . . . . 464
Diamond Blades . . . . 468 - 469
Abrasives
Surface Conditioning
OnSite
Supply
Cutting
Fasteners
Grinding Wheels
Type 27 Depressed Center Grinding Wheels
Anchors
Strut
A24N
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
Threaded
Rod
Secondary application: Low
Grade Stainless Steel
• Aluminum oxide grain
• Soft bond for stock removal
A24R
Pipe
Hangers
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
A46N Aluminum
(Non-Ferrous Metals)
Primary application:
Non-Ferrous Metals
(Aluminum, Copper, Brass etc.)
• Aluminum oxide grain
• Soft bond for aggressive
removal of material without
loading
• Outlasts competition by as
much as 40%
Saitech Ultimate
Performance™
Z24R
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
Primary application: Stainless
Steel and other High Tensile
Alloys
Secondary application:
Stainless Steel, High Tensile
Alloys
Secondary application:
Ferrous Metals (Iron, Steel,
Welds, etc.)
• Tough zirconium grain
• High performance grinding
for the toughest jobs
• High performance, ceramic
aluminum oxide grain.
• Very uniform, high density
grain structure is extremely
durable and self sharpening
for long life and cooler cut
• Aluminum oxide grain
• Our most popular wheel
• For general purpose
grinding
• Longer life for fewer wheel
changes
C24N
Tools
Primary application: Masonry,
Concrete, Stone
Secondary application: Cast
Iron and other Ferrous metals
Abrasives
• Silicon carbide grain
• Soft bond for fast stock
removal
Note:
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
Dimensions (Inches)
A Dia.
B Width
Part Numbers
C Bore
Max RPM
A24N
A24R
A46N
Z24R
C24N
Saitech UP
OnSite
Supply
1/4
3/8
13,500
SAI20012
—
—
—
—
—
1/4
5/8
13,500
SAI20015
SAI20013
SAI20018
SAI22599
SAI20017
—
4-1/2
1/4
7/8
13,300
SAI20060
SAI20063
SAI20062
SAI22600
SAI20061 SAI20064
4-1/2
1/4
5/8-11
13,300
SAI20160
SAI20163
SAI20162
SAI22610
SAI20161
—
5
1/4
7/8
12,200
SAI20070
SAI20073
SAI20072
SAI22602
SAI20071
—
5
1/4
5/8-11
12,200
SAI20170
SAI20173
SAI20172
SAI22612
SAI20171
—
6
1/4
7/8
10,200
—
—
—
SAI22603
—
—
6
1/4
5/8-11
10,200
—
—
—
SA122613
—
—
Safety
4
4
Rentals
460
7
1/4
7/8
8,500
SAI20081
SAI20080
SAI20083
SAI22604
SAI20082
—
7
1/4
5/8-11
8,500
SAI20085
SAI20086
SAI20088
SAI22614
SAI20087
—
9
1/4
7/8
6,600
SAI20091
SAI20090
SAI20093
SAI22606
SAI20092
—
9
1/4
5/8-11
6,600
SAI20095
SAI20096
SAI20098
SAI22616
SAI20097
—
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Pipeline
A24R
Primary application: Ferrous Metals
(Iron, Steel, Welds, etc.)
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
• Aluminum oxide grain
• For general purpose, low cost cutting only
• Combines fast cutting and long life
Dimensions (Inches)
Part Numbers
Max RPM
A24R
3/8
18,000
SAI22000
4
1/8
3/8
13,500
SAI22010
4-1/2
3/32
7/8
13,300
SAI22020
4-1/2
3/32
5/8-11
13,300
SAI22120
5
3/32
7/8
12,200
SAI22070
5
3/32
5/8-11
12,200
SAI22170
B
Width
C
Bore
Max
RPM
Pipeline
Pipeline
Z-Tech
6
1/8
7/8
10,200
SAI22045
7
3/32
7/8
8,500
SAI22056
4
1/8
5/8
13,500
SAI22015
SAI22619
7
3/32
5/8-11
8,500
SAI22057
4-1/2
1/8
7/8
13,300
SAI22030
SAI22620
9
3/32
7/8
6,600
SAI22066
4-1/2
1/8
5/8-11
13,300
SAI22130
SAI22630
9
3/32
5/8-11
6,600
SAI22067
5
1/8
7/8
12,200
SAI22040
SAI22622
5
1/8
5/8-11
12,200
SAI22140
SAI22632
6
1/8
7/8
10,200
SAI22042
SAI22623
6
1/8
5/8-11
10,200
SAI22046
SAI22633
7
1/8
7/8
8,500
SAI22055
SAI22624
7
1/8
5/8-11
8,500
SAI22052
SAI22634
9
1/8
7/8
6,600
SAI22065
SAI22626
9
1/8
5/8-11
6,600
SAI22062
SAI22636
Tools
A
Dia.
Primary application: Ferrous metals
(Iron, Steel, Welds, etc.)
Primary application: Stainless Steel, High
Tensile Alloys
Secondary application: Stainless Steel,
High Tensile Alloys
• High performance, ceramic aluminum
oxide grain
• Very uniform, high density grain structure is extremely durable
• and self sharpening for long life and cooler cut
Dimensions (Inches)
Part No.
A Dia.
B Width
C Bore
Max RPM
Saitech UP
9
3/32
5/8-11
6,600
SAI22099
Abrasives
Z24R
Saitech Ultimate Performance™
Secondary application: Ferrous metals (Iron,
Steel, Welds, etc.)
• Tough zirconium grain
• High performance cutting/notching for
the toughest applications
Dimensions (Inches)
Part No.
A Dia.
B Width
C Bore
Max RPM
Z24R
4
3/32
5/8
13,500
SAI22640
4-1/2
3/32
7/8
13,300
SAI22641
4-1/2
3/32
5/8-11
13,300
SAI22651
5
3/32
7/8
12,200
SAI22643
5
3/32
5/8-11
12,200
SAI22653
6
3/32
7/8
10,200
SAI22644
6
3/32
5/8-11
10,200
SAI22654
7
3/32
7/8
8,500
SAI22645
Note:
7
3/32
5/8-11
8,500
SAI22655
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
9
3/32
7/8
6,600
SAI22646
9
3/32
5/8-11
6,600
SAI22656
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Strut
C Bore
1/8
Threaded
Rod
• Tough zirconium grain
• High performance cutting/light grinding for the toughest
applications
B Width
3
Hartford, CT
800-969-0285
461
OnSite
Supply
Primary application: Ferrous Metals (Iron, Steel, Welds, etc.)
Secondary application: Stainless Steel, High Tensile Alloys
A Dia.
Safety
Sait Z-Tech Pipeline
Part No.
Pipe
Hangers
Dimensions (Inches)
Rentals
• Aluminum oxide grain
• For the pipeline industry
• Designed/manufactured to
perform both cutting & light
grinding
• Long life
Anchors
Type 27 Specialty Cutting and Light Grinding Wheels
Fasteners
Cutting / Grinding Wheels
Fasteners
Cutting / Grinding Wheels
Type 27 Depressed Center .045 Cutting Wheels
Z-Tech .045 - High Performance
Anchors
A46N Aluminum
(Non-Ferrous Metals)
.045
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Welds, Aluminum, Copper, Brass etc.)
•
•
•
•
•
Primary application: NonFerrous Metals (Aluminum,
Copper, Brass etc.)
Strut
• Aluminum oxide grain
• Thin .045 width
• Soft bond for aggressive
cutting without loading
Saitech Ultimate Performance™
Primary application: Stainless Steel and other High Tensile Alloys
Secondary application: Ferrous Metals (Iron, Steel, Welds, etc.)
A60S .045
•
•
•
•
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Welds, Aluminum, Copper, Brass etc.)
Threaded
Rod
•
•
•
•
•
So unique that it has a patent
Thin .045 width
Special zirconium grain
Hard bond for extremely long life
Fast, burr free cutting
So unique that it has a patent pending
Thin .045 width
Special aluminum oxide grain
Hard bond for extremely long life
Fast, burr free cutting
So unique that it has a patent pending
Thin .045 width
Fast cutting with long life
Wheel can be mounted to right angle grinders with standard
Type 27 flanges
Dimensions (Inch)
Part Numbers
Pipe
Hangers
A
Dia.
B
Width
C
Bore
Max
RPM
A46N
A60S
Saitech
Z-Tech
4
.045
5/8
13,500
SAI22340
SAI22011
SAI22068
SAI23333
4-1/2
.045
7/8
13,300
SAI22345
SAI22021
SAI22072
SAI23334
5
.045
7/8
12,200
SAI22350
SAI22071
SAI22073
SAI23335
6
.045
7/8
10,200
SAI22360
SAI22047
SAI22082
SAI23336
7
.045
7/8
8,500
SAI22370
SAI22053
SAI22088
SAI23337
Type 28 Depressed Center Grinding Wheels
Tools
A24R
Primary application: Ferrous Metals
(Iron, Steel, Welds, etc.)
Abrasives
• Aluminum oxide grain
• Medium bond for longer life and
fewer wheel changes
Note:
Saitech Ultimate Performance™
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
Primary application: Stainless
Steel
OnSite
Supply
Secondary application: Ferrous
Metals (Iron, steel, welds, etc.)s
• Combines maximum material
removal with long life
• Exclusive formula with patented
3M Cubitron grain
Dimensions (Inch)
Safety
A
Dia.
B
Width
Primary application: Masonry, Concrete, Stone, Brick
7
• Silicon carbide grain
• Soft bond for fast stock removal
7
9
9
C24N
Rentals
462
Hartford, CT
800-969-0285
Part Numbers
C
Bore
Max
RPM
A24R
C24N
Saitech
1/4
7/8
8,500
SAI21000
SAI21002
SAI21084
1/4
5/8-11
8,500
SAI21005
SAI21006
SAI21089
1/4
7/8
6,600
SAI21010
SAI21012
SAI21094
1/4
5/8-11
6,600
SAI21015
SAI21016
SAI21099
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Type 1 Thin High Speed Cut-Off Wheels
Fasteners
Cut-Off Wheels / Accessories
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
• Aluminum oxide grain
• General purpose, long life
Anchors
A24R
• Aluminum oxide grain
• Hard bond for aggressive cutting on rough
applications
A
Dia.
B
Width
C
Bore
Max
RPM
A25R
A36T
A60T
Saitech UP
3
1/16
1/4
25,000
—
SAI23042
SAI23043
SAI23142
3
1/16
3/8
25,000
—
SAI23040
SAI23041
SAI23140
A60T
3
.035
1/4
25,000
—
SAI23052
SAI23053
SAI23152
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
3
.035
3/8
25,000
—
SAI23050
SAI23051
SAI23150
3
1/8
3/8
20,372
SAI23060
—
—
—
4
1/16
1/4
19,000
—
SAI23067
SAI23068
SAI23167
4
1/16
3/8
19,000
—
SAI23065
SAI23066
SAI23165
4
1/16
5/8
19,000
—
SAI23061
SAI23062
SAI23161
4
.035
1/4
19,000
—
SAI23071
SAI23072
SAI23171
4
.035
3/8
19,000
—
SAI23069
SAI23070
SAI23169
4
.035
5/8
19,000
—
SAI23063
SAI23064
SAI23163
4
1/8
3/8
15,278
SAI23075
—
—
—
6
.035
5/8
10,168
—
SAI23204
SAI23205
—
7
.035
1-1/4
8,732
—
SAI23252
SAI23253
—
8
1/16
1-1/4
7,640
—
SAI23277
SAI23278
—
Secondary application: high tensile metals
• Very fine aluminum oxide grain
• Hard bond for smooth cutting
• For use in nuclear, aerospace, automotive,
foundry industries, and plant maintenance
• Now available with 3/8" arbor
Saitech Ultimate Performance™
Primary application: Stainless Steel, High
Tensile Alloys
Threaded
Rod
Secondary application: Stainless Steel
Part Numbers
Secondary application: Ferrous and/or
Non-Ferrous Metals
• Combines fast cutting with extremely long life
Tools
Dimensions (Inch)
Pipe
Hangers
Primary application: Ferrous and/or NonFerrous Metals (Iron, Steel, Welds, Aluminum,
Copper, Brass etc.)
Strut
A36T
Abrasives
Adapters
Type 1 Cut-Off Adapters
• For use with Type 1 Thin high Speed Wheels only
Size
Part No.
95002
95003
95004
OnSite
Supply
1/4 x 1/4
1/4 x 3/8
1/4 x 1/2
Type 1 and Type 27 Reusable 5/8-11 Adapter
5/8-11 Reusable Adaptor
Philadelphia, PA
610-647-8070
Part No.
95055
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
463
Rentals
Description
Safety
• Reusable 5/8-11 adaptor for use on Type 1 and Type 27 reinforced wheels with a 7/8
arbor, a max. diameter of 5” and a wheel thickness of .045 to 1/8”
Fasteners
Chop Saw / Cut-Off Wheels
Type 1 Chop Saw Wheels
Anchors
Stud King®
A24N - Fast Cutting on Stationary Saw
Primary application:
Metal Studding, Thin
Rebar, Light Gauge
Metals
Primary application: Ferrous metals (iron, cast iron, etc.)
Strut
• Aluminum oxide
grain
• General purpose
cool cutting on thin
metals
• Burr free finish
• Aluminum oxide grain
• General purpose
• Soft bond for fast stock removal
Iron Worker®
Primary application: Structural Metal
Threaded
Rod
• Aluminum oxide grain
• Fast cutting
• Excellent for use on angle iron, heavy re-bar, and other
ferrous metals
Non-Ferrous Metals (Aluminum)®
Primary application: Non-Ferrous Metals (Aluminum, Bronze,
Brass)
Pipe
Hangers
• Aluminum oxide grain
• Special non-loading formulation
Dimensions (Inch)
Saitech Steel Worker™
Primary application: Stainless Steel and other
High Tensile Alloys
Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM
Iron Stud
King
Worker
Saitech
Steel
Worker
Aluminum
—
—
Tools
10
3/32
5/8
6100
SAI24035
—
Secondary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
12
3/32
1
5100
SAI24030
SAI24031
—
—
• New and improved for the 14 inch wheel
• Formulated with 3M Cubitron Grain
• Extremely fast burr free cutting
12
3/32
1
5100
—
—
SAI24033
—
14
3/32
1
4400
SAI24050
SAI24051
—
—
14
3/32
1
4400
—
—
SAI24053
—
14
3/32
1
4400
—
—
—
SAI24052
16
3/32
1
3700
SAI24010
SAI24011
—
—
16
3/32
1
3700
—
—
SAI24013
—
Abrasives
Sait EZ-Chop™
Primary application: Metal Studding, Thin Rebar, Light Gauge
Metals, Angle Iron
•
•
•
•
OnSite
Supply
Aluminum oxide grain
General purpose cool cutting on thin metals
Burr free finish
Use this wheel as an economical alternative for general
purpose cutting
Dimensions (Inches)
Sait EZ-Chop Attacker®
Primary application: Metal Studding, Thin Rebar, Light Gauge
and Medium Metals
Part No.
A Dia.
B Width
C Bore
Max RPM
A24R
12
3/32
1
5,100
SAI24034
14
3/32
1
4,400
SAI24039
Safety
• Aluminum oxide grain
• General purpose economy cutting
• Fast cutting on thin metals
Dimensions (Inches)
Part No.
Rentals
A Dia.
B Width
C Bore
Max RPM
A24R
14
3/32
1
4,400
SAI24500
464
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Ductile
Primary application: Ferrous Metals (Steel,
Angle Iron, Rebar)
Primary application: Ductile
Pipe - (very hard steel casing
enclosing a cement lining, water
mains, etc.)
• Provides consistent performance with
long life
Secondary application:
Combination Metal (Concrete,
Cast Iron, Hard Metals,
Concrete, Coated Steel, etc.)
Brute®
Primary application: Thin Metal, Sheet
Metal, Decking, and other Ferrous
Materials.
•• Combination aluminum oxide and silicon carbide formulation
• Long life
• Extremely hard bond for cutting materials that
present a very sharp edge to the wheel
Big M.A.C. (Masonry-Asphalt-Concrete)
Strut
A24R
Anchors
Type 1 High Speed Cut-Off Wheels for Portable Saws
Fasteners
Gas Saw - Cut-Off Wheels
Primary application: Masonry, Asphalt, Concrete
Dimensions (Inches)
Threaded
Rod
•• For use on high horsepower machines
•• Rugged fiberglass construction for maximum
safety
•• Excellent for the railroad industry
•• Also for use on heavy sections of ferrous metals (I-Beams, bar
stock)
•• Special silicon carbide grain
•• Superior cutting action
•• 40% longer life than general purpose concrete wheels
Part Numbers
A Dia.
B Width
C Bore
Max RPM
A24R
Brute
Hobo
Ductile
M.A.C.
6-1/2
3/32
5/8
10500
SAI23222
—
—
—
—
7
3/32
5/8
8500
SAI23234
—
—
—
—
8
3/32
5/8
7600
SAI23258
—
—
—
—
12
1/8
1
6300
SAI23410
SAI23412
—
SAI2341
SAI23460
12
1/8
7/8
6300
SAI23400
—
—
—
—
12
1/8
20 mm
6300
SAI23420
SAI23422
—
SAI23425
*SAI23462
14
1/8
1
5400
SAI23450
SAI23452
SAI23501
SAI23453
*SAI23463
14
1/8
20 mm
5400
SAI23455
SAI23457
—
SAI23458
*SAI23464
Pipe
Hangers
Primary application: Mainline, Secondary, Spur Rail
Steel
Tools
Hobo®
Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM
A46N
4
.045
5/8
13500
SAI23304
4
.045
5/8
13500
4-1/2
.045
7/8
13300
4-1/2
.045
7/8
13300
5
.045
7/8
12200
5
.045
7/8
12200
6
.045
7/8
10200
6
.045
7/8
10200
7
.045
5/8
8500
7
.045
5/8
8500
Philadelphia, PA
610-647-8070
A60S
Saitech
SAI23172
Primary application: Ferrous and/or Non-Ferrous Metals
(Iron, Steel, Welds, Aluminum, Bronze, Brass etc.)
SAI23174
• Thin .045 width
• Use with reusable 5/8-11 adapter to fit right-angle grinders
• Extremely fast cutting with long life
SAI23177
Saitech™ .045
SAI23182
Secondary application: Ferrous Metals (Iron, Steel, Welds
etc.)
SAI23184
• Thin .045 width
• Use with reusable 5/8-11 adapter to fit right-angle grinders
• Combines fast cutting with extremely long life
SAI23099
SAI23314
SAI23101
SAI23315
SAI23103
SAI23316
Primary application: Stainless Steel, High Tensile Alloys
SAI23106
SAI23317
Washington D.C.
877-419-2755
A60S
SAI23107
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
465
OnSite
Supply
Dimensions (Inch)
• Aluminum oxide grain
• Soft bond for aggressive cutting without loading
• Use with reusable 5/8-11 adapter to fit right-angle grinders
Safety
Primary application: Non-Ferrous Metals (Aluminum,
Copper, Brass, etc.)
Rentals
A46N Aluminum (Non-Ferrous Metals) .045
Abrasives
* With Pin Hole
Fasteners
Diamond Blades
Utility Green Segmented Cup Grinders
Anchors
Part No.
Strut
S5G Single Row for general
grinding and material removal.
D5G Double Row for long
life grinding and a smooth
finish.
Specification
Size / Desc.
94177
S5G
4" x 5/8-11" Single Row
94175
D5G
4" x 5/8-11" Double Row
94178
S5G
7" x 5/8-11" Single Row
94176
D5G
7" x 5/8-11" Double Row
NOTE: All cup grinders come with 5/8-11 threaded hub. Available with 7/8" arbor
upon request.
Threaded
Rod
Star Blue Turbo Blades
• Faster cut than segmented blades
due to the serrated segment design,
allowing less surface-to-surface
contact
Pipe
Hangers
• General Purpose, Harder Materials,
Some Rebar
• Universal 1" and 20 mm Arbor
Star Blue
Size
Part Number
• Great Cutting Value
• Specification: T7B
4” x .080 x 7/8”
74959
74960
4-1/2” x .080 x 7/8”
74961
7” x .095 x 7/8”
5-Pack Star Blue Turbo Blades
76589
4” x .080 x 7/8”
76590
4-1/2” x .080 x 7/8”
76591
7” x .095 x 7/8”
Tools
Utility Green Tuck Point Blades
• Best value for tuck point cutting
• For cleaning mortar joints
• Specification: DTG4000
Abrasives
• Available in a bonded 3-stack
blade for faster cutting
4" x .250 x 7/8"
94187
4-1/2" x .250 x 7/8"
3-N-1 Utility Green Tuck Point Blades
94183
4” x .080 x 7/8”
94184
4-1/2” x .080 x 7/8”
5 Pack Utility Green Tuck Point Blades
3-in-1Utility Green
Also Available in a
2-in-1 version!
Utility Green
Size
Part Number
94186
94206
4” x .250 x 7/8”
94207
4-1/2” x .250 x 7/8”
OnSite
Supply
Star Blue Small Diameter Blades for
Electric Saws & Right Angle Grinders
Size
Part Number
• Specification: E2B
Safety
• Long Life
74950
4” x .070 x 7/8”
• For cutting hard materials
(concrete)
74951
4-1/2” x .070 x 7/8”
74952
7” x .080 x 7/8”
10-Pack Star Blue Small Diameter Blades
Rentals
Star Blue
466
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
42196
4” x .070 x 7/8”
42201
4-1/2” x .070 x 7/8”
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Standard Gold High Speed Blades
• Dry or Wet Cutting
H7S
Part No.
H8S
Part No.
H10S
Part No.
12" x .110 x UNV
57706
57707
57708
• Diamond Depth of .255"; Segment
Height .350"
14" x .125 x UNV
57719
57720
57721
• G4000 - Long Life For Cutting
16" x .125 x UNV
91674
92873
91767
18" x .125 x 1"
28303
16868
14395
• H7S - Hard Materials
20" x .125 x 1"
28270
28271
13846
• H8S - Concrete with some rebar
• H10S Green Concrete, asphalt,
brick and block
1-5/8"
95034
7/8"-5/8"
95031
1-20 mm
95035
5/8" Dia
95032
1-7/8"
95036
1/2" Dia.
95033
1-3/4"
95037
1/2"- 3/8"
• For use with Type 1 Cut-off Wheels
• Reduces wheel arbor size
• Skin packaged in quantities of 10 per package
Pipe
Hangers
95030
Standard Gold
Type 1 Cut-Off Wheel Reducing Bushings
Size
Part No.
Strut
Concrete, Hard Material
Threaded
Rod
Size
Anchors
• Very Good Quality
Fasteners
Diamond Blades / Cup Wheels
C16
Primary application: Combination of
Ferrous Metals and/or Concrete
Primary application: Masonry, Concrete
and Stone
•• Combination of aluminum oxide and
silicon carbide grain
•• Coarse grit for tough grinding
applications
•• Excellent for cleaning castings, mold
marks, remove flashing
B Width
Primary application: Ferrous Metals
•• Aluminum oxide grain
•• Coarse grit wheel for tough grinding
applications
•• Excellent for cleaning castings, mold
marks, removing flashing
Part Numbers
C Bore
Max RPM
A16
A16MB*
C16
C16MB*
CA16
CA16MB*
4(3)
2
5/8-11
9050
SAI26000
SAI26003
SAI26001
SAI26004
SAI26002 SAI26005
5(4)
2
5/8-11
7250
SAI26010
SAI26013
SAI26011
SAI26014
SAI26012 SAI26015
6(4-3/4)
2
5/8-11
6050
SAI26020
SAI26023
SAI26021
SAI26024
SAI26022 SAI26025
Safety
Dimensions (Inches)
A Dia.
A16
•• Silicon carbide grain
•• Coarse grit for tough grinding
applications
•• Excellent for cleaning castings, mold
marks, remove flashing
OnSite
Supply
CA16
Abrasives
Tools
Type 11 Cup Wheels
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
467
Rentals
*MB = Metal Backing for secure holding
Fasteners
Flap Discs
Saitlam F - Flap Discs
Anchors
•• Offers combinations of grinding/blending through the use of thick layers of industrial
quality abrasive cloth bound to a backing
•• Fast, cool grinding without clogging or loading
•• Excellent for a wide range of applications
•• Combines the work of a depressed center grinding wheel and fiber discs to eliminate
the need for two separate operations
•• Available in several materials and backings to suit the needs of specific applications
•• Resin over resin bond construction for a strong bond resistant to heat and moisture
2A Material
Strut
Primary application: Ferrous and/or Non-Ferrous metals (Iron, Steel, Aluminum, Brass,
Copper etc.)
••
••
••
••
Premium aluminum oxide grain
General purpose, long life
Closed coat structure for more material removal
Aluminum oxide grain
Threaded
Rod
Pipe
Hangers
Part
No.
Grit
40
76540
76450
50
76550
76460
60
76560
60
Part
No.
Grit
76440
Diameter
4-1/2"
Arbor
5/8-11
Part
No.
Grit
40
76740
40
50
76750
50
76760
60
76780
80
76720
120
76480
80
76580
80
76420
120
76520
120
Diameter
5"
Arbor
5/8-11
Diameter
Arbor
7"
5/8-11
Tools
Saitlam UK - Flap Discs
Fiberglass Backing
•• Allows for lighter, quieter operation
•• Will not splinter or smear on the work piece
•• Backing wears with the abrasives cloth
Abrasives
Saitlam UK (Conical Shape)
••
••
••
••
OnSite
Supply
Safety
Rentals
468
Available in Z (Zirconium) grain
Conical shape ideal for working with large surfaces or complex shapes
Working angle is “built-in”
For general purpose stock removal and finishing
Part
No.
Grit
40
73694
40
50
73695
50
73687
60
73696
60
73688
80
73697
80
73689
120
73698
120
Part
No.
Grit
73685
73686
Hartford, CT
800-969-0285
Diameter
4-1/2"
Boston , MA
800-645-6155
Arbor
7/8"
Washington D.C.
877-419-2755
Diameter
Arbor
5"
7/8"
Philadelphia, PA
610-647-8070
Ovation® Flap Discs
Fasteners
Flap Discs
Primary application: Ferrous and Non-Ferrous metals
Anchors
Secondary application: Stainless Steel, High Tensile Steel, Titanium, Aluminum
Grit
Diameter
Arbor
Part
No.
Grit
Diameter
Arbor
Part
No.
Grit
78005
36
78025
36
78045
36
78006
40
78026
40
78046
40
78008
60
78028
60
78048
60
78009
80
78029
80
78049
80
78011
120
78031
120
78051
120
78105
36
78125
36
78145
36
78106
40
78126
40
78146
40
78108
60
78128
60
78148
60
78109
80
78129
80
78149
80
78111
120
78131
120
78151
120
4-1/2"
5/8-11
5"
5"
7/8"
5/8-11
Arbor
7/8"
7"
5/8-11
7"
Tools
4-1/2"
7/8"
Diameter
Pipe
Hangers
Part
No.
Threaded
Rod
Strut
•• High Density design for softer, cushioned grinding, blending and finishing
•• More abrasive material than standard low density flap discs for very long life
•• Premium zirconium material for aggressive cutting and long life
•• More grinding material = increased productivity
•• Available in 4-1/2”, 5” and soon 7” with and without 5/8-11 hub
Precise, Aggressive Grinding of Fillet Welds
Ultimate tool for grinding fillet welds
• Available in 2 thicknesses for smaller and larger fillet welds.
• Premium Zirconia material used in the disc will provide excellent service
life
Abrasives
Polifan® - Curve Flap Discs
• Tough and aggressive - removes scale and bead from
OnSite
Supply
• all metals: steel, stainless and alloys.
• Works faster than grinding wheels without the risk of undercutting the
work piece.
Part No.
Unthreaded
Arbor
Threaded
Arbor
Diameter
Disc
Thickness
Fillet Weld
Width
Grit
Bore
Max RPM
67192
67212
4-1/2"
9/16"
Medium 3/16"
40
7/8"
13,300
67339
67359
4-1/2"
5/8"
Large 5/16"
40
7/8"
16,300
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
469
Rentals
Safety
• Smooth finish allows easy visual inspection for defects, such as
porosity and inclusions.
Fasteners
Flap Wheels
2A Flap Wheels — Now in 40 Grit!
Available in straight or threaded shank
Anchors
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Aluminum, Copper, etc.)
Secondary application: Wood, Plastic, Fiberglass, etc.
•• General purpose
•• Premium aluminum oxide grain
•• Excellent for cleaning, de-burring, polishing, blending
Strut
Threaded
Rod
Part No.
Pipe
Hangers
Part No.
Diameter
(Inch)
Width
(Inch)
3./4
Tools
1
1
Abrasives
1/2
OnSite
Supply
1-1/2
1
Safety
2
1
Rentals
Width
(Inch)
Grit
1/4"
Straight
1/4"-20
Threaded
Grit
1/4"
Straight
1/4"-20
Threaded
60
SAI70001
SAI71000
60
SAI70060
SAI71050
80
SAI70002
SAI71001
80
SAI70061
SAI71051
120
SAI70003
SAI71002
120
SAI70062
SAI71052
180
SAI70063
SAI71053
240
SAI70064
SAI71054
60
SAI70070
SAI71055
80
SAI70071
SAI71056
120
SAI70072
SAI71057
SAI70073
SAI71058
180
SAI70004
SAI71003
240
SAI70005
SAI71004
60
SAI70010
SAI71010
80
SAI70011
SAI71011
120
SAI70012
SAI71012
1/2
2-1/2
1
180
SAI70013
SAI71013
180
240
SAI70014
SAI71014
240
SAI70074
SAI71059
60
SAI70025
SAI71020
60
SAI70080
SAI71060
80
SAI70081
SAI71061
120
SAI70082
SAI71062
80
SAI70026
SAI71021
120
SAI70027
SAI71022
1/2
180
SAI70028
SAI71023
180
SAI70083
SAI71063
240
SAI70029
SAI71024
240
SAI70084
SAI71064
60
SAI70040
SAI71030
60
SAI70090
SAI71070
80
SAI70091
SAI71071
120
SAI70092
SAI71072
80
SAI70041
SAI71031
120
SAI70042
SAI71032
180
SAI70043
SAI71033
180
SAI70093
SAI71073
240
SAI70044
SAI71034
240
SAI70094
SAI71074
60
SAI70050
SAI71040
60
SAI70100
SAI71080
80
SAI70101
SAI71081
120
SAI70102
SAI71082
3
3/4
80
SAI70051
SAI71041
120
SAI70052
SAI71042
180
SAI70053
SAI71043
180
SAI70103
SAI71083
SAI71044
240
SAI70104
SAI71084
240
470
Diameter
(Inch)
SAI70054
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
1
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Interleaf Flap Wheels
Fasteners
Interleaf Flap Wheels
Interleaf Flap Wheels are constructed with alternating flaps of surface conditioning
material and coated abrasive material for a high cut rate and a uniform scratch pattern provides blending action while leaving final finish on work piece.
Smear-resistant non-woven material for clean, smear-proof work surfaces.
Interleaf design makes product more aggressive than SAIT non-woven flap brushes and
less aggressive than SAIT coated abrasive flap wheels.
•• Medium surface conditioning material with either 60 or 80
grit coated abrasive material
•• Excellent for removing heavy oxidation, blending, cleaning and
deburring
Size
(Inches)
2 x 1 x 14
Very Fine Grade
Grit
Grade
Max RPM
Part
No.
Box
Qty
60
Medium
11,000
77710
10
80
Medium
11,000
77712
10
120
Very Fine
11,000
77714
10
180
Very Fine
11,000
77716
10
Primary application: Aluminum and Stainless Steel
60
Medium
8,000
77730
10
Secondary application: Ferrous and Non-Ferrous Materials
80
Medium
8,000
77732
10
120
Very Fine
8,000
77734
10
180
Very Fine
8,000
77736
10
60
Medium
8,000
77750
10
Also for: Fiberglass
•• Very fine surface conditioning material with either 120 or 180
grit coated abrasive material
•• Excellent for grain finishing, satin finishing and linear scratch
patterns
3 x 1 x 14
3 x 2 x 1/4
80
Medium
8,000
77752
10
120
Very Fine
8,000
77754
10
80
Very Fine
8,000
77756
10
Sand-Light™ Non-Woven Rolls
Non-woven synthetic fiber impregnated with abrasive grain for
surface conditioning without damage to or removal of base material.
Abrasives
• Popular width to fit most power sanders
• Waterproof material for use with a variety of lubricants
• Roll form-cut to size for customized fit for individual application
needs
Pipe
Hangers
Also for: Fiberglass
Tools
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Threaded
Rod
Strut
Medium Grade
Medium Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Also for: Fiberglass
OnSite
Supply
• Excellent starting point for de-burring and blending
• Available in 4" and 6" widths - 30’ rolls
Very Fine Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Part No. - Grade A/O Grain
Medium
Very Fine
Size
Box Qty
77610
77630
4" x 30'
1
77614
77634
6" x 30'
1
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
471
Rentals
• Very conformable and durable
• Excellent for light blending and finishing
• Available in 4" and 6" widths - 30' rolls
Safety
Also for: Fiberglass
Fasteners
Shop Rolls / Hand Pads
Sand-Light™ Abrasive Hand Pads
Handy Rolls
Anchors
Primary application:
Ferrous and/or NonFerrous Materials (Iron,
Aluminum, Copper,
Normal and High Tensile
Steel)
Strut
•
•
•
•
Threaded
Rod
Pipe
Hangers
1"
Tools
1-1/2"
Grit
Part No.
40
Primary application: Ferrous and/or
Non-Ferrous metals
• Heavy duty
• Excellent for removing heavy rust
and cleaning welds
Secondary application:
Wood, Fiberglass, etc.
Maroon
Packaging 50 yd. length,
1 per box
Primary application: Ferrous
and/or Non-Ferrous metals
Aluminum oxide grade
Medium tensile strength
Primarily for hand applications
High quality DA-F material for high flexibility
Width
Brown
Width
!
Black
Abrasives
Grit
Part No.
80405
150
81506
50
80505
180
81806
60
80605
220
82206
80
80805
240
82406
Green
100
81005
320
83206
120
81205
400
83406
Primary application: Ferrous and/or Non-Ferrous metals
Secondary application: Paint, Varnish
150
81505
40
80420
180
81805
50
80520
Gray
220
82205
60
80620
240
82405
80
80820
Primary application: Non-Ferrous metals
Secondary application: Wood
320
83205
100
81020
400
83405
120
81220
40
80406
150
81520
50
80506
180
81820
60
80606
220
82220
80
80806
240
82420
100
81006
320
83220
120
81206
400
83420
1-1/2"
2"
Primary application: Stainless Steel
Secondary application: Ferrous and/or Non-Ferrous metals
• For blending and finishing
• Excellent for paint removal
• General cleaning
• Excellent for stripping paint and varnish
• Ultra fine
• For light finishing
• Excellent for sanding before/between finish coats
White
Primary application: Fiberglass, Vinyl, Plastic, Formica
Secondary application: Ceramic
• Light duty
• For light cleaning and polishing
Size
Grade
Saitscreen™ Rolls
OnSite
Supply
Primary application: Ferrous
and/or Non-Ferrous Materials
(Iron, Aluminum, Copper, Normal
and High Tensile Steel)
Safety
•
•
•
•
•
•
•
Size
1-1/2" x 10 yd
Rentals
472
COM
P
SCOTCH ARE TO
• General purpose
-BRITE 3M
• For removing light rust
™
PADS
• Excellent for cleaning and brightening
Silicon carbide grain
Long life
Waterproof
Non-loading screen cloth
Also for use on wood, paint, etc.
Secondary applications: ceramic
Individually packaged rolls
Grit
Part No.
80
84090
120
84093
180
84096
Hartford, CT
800-969-0285
6" x 9"
Part No.
Qty
X-Ref
Heavy Duty
Brown
Color
77440
20
3M-7440
Gen. Purpose
Maroon
77447
20
3M-7447
Stainless
Black
77446
20
3M-7446
Stripper
Green
77496
20
3M-96
Ultra Fine
Gray
77448
20
3M-7448
Light Duty
White
77486
20
3M-7445
A big word about our service DEPENDABLE
NEFCO now has 4 Distribution Centers
to serve you. All locations are full
service and are capable of making sure
you get the materials you need, where
you need them, when you need them.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Grit
Part No.
Qty
80
84070
50
Saitscreen
100
84071
50
4-3/16" x 11"
Diecut
120
84072
50
220
84075
50
80D
84066
100
Size
Fasteners
Sanding Sheets
Sheets
100
100C
84050
100
120C
84052
100
150C
84053
100
180A
84054
100
220A
84055
100
Rolls
80D
84056
1
Paper
100C
84057
1
3-5/16" x 50 yd
120C
84058
1
150C
84059
1
9 X 11 AW-C
Philadelphia, PA
610-647-8070
•
•
•
•
•
•
•
Anchors
Silicon carbide grain
Paper backing
Open coat structure prevents loading
Use dry
Provides a smooth finish
Easy-to-handle rolls for on-the-job "cut to size" use
Wood - Plaster, dry wall joints
Grit
Part No.
Qty
40D
84211
100
50D
84212
100
60D
84213
100
• Aluminum oxide grain
• Open coat structure prevents
loading
• Water resistant
• Long life combined with
excellent stock removal
• Excellent for woodworking
applications
• Wood - Wood, plaster,
fiberglass
• Metal - Ferrous and/or NonFerrous materials (Iron, Steel,
Copper, etc.)
• Available in F - weight - high flexibility
Size
Tools
• Extremely long lasting, Use wet or dry
• Open coat structure prevents loading
• Wood - Wood, sealers, fillers
• Metal - Ferrous or Non-Ferrous
• Available in grits up to 1200 for
ultra fine finishing
• Available in weights:
"C" - medium weight, medium
flexibility
"D" - heavy weight, low flexibility
9 x 11 AW-D
Paper
DA-F
Aluminum Oxide (AW-C & AW-D)
Size
Strut
100
84051
Threaded
Rod
84069
80D
Pipe
Hangers
150C
Grit
Part No.
Qty
36
84907
25
80D
84214
100
40
84908
25
100D
84215
100
50
84909
25
120D
84216
100
60
84910
25
150C
84200
100
180C
84201
100
9 x 11 DA-F
80
84911
25
100
84912
50
220C
84202
100
120
84913
50
240C
84203
100
150
84914
50
320C
84204
100
180
84915
50
400C
84205
100
220
84916
50
500C
84206
100
240
84917
50
600C
84207
100
320
84918
50
800C
84208
100
180A
84054
100
1200C
84209
100
220A
84055
100
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Abrasives
4-3/16" x 11"
Diecut
100
100
OnSite
Supply
Paper
84067
84068
Safety
3-5/16" x 11"
100C
120C
• Strong cloth screen
impregnated with silicon
carbide grain
• Open coat structure prevents
loading
• Use wet or dry
• Extremely long lasting
• Double sided and die
cutWood - Plaster, dry wall
joints
473
Rentals
Paper
Saitscreen
Fasteners
Abrasive Belts
Aluminum Oxide Closed Coat Abrasive Belts
Resin over resin construction for a strong bond resistant to heat and moisture bidirectional
tape splice for a stronger belt that can be used in either direction.
Anchors
1A-X/2A-X Material
Primary application: Ferrous and/or Non-Ferrous Metals
Secondary application: Wood, Fiberglass, Plastic, etc.
••
••
••
••
Aluminum oxide grain
Use dry only
X-weight backing-average weight and flexibility
Closed coat structure for more material removal and better finishing
Strut
Threaded
Rod
Size (Inch)
Grit
Part
No.
Size (Inch)
Grit
Part
No.
Size (Inch)
Grit
Part
No.
Size (Inch)
Grit
Part
No.
1/4 x 18
36
60016
1/2 x 18
100
60063
1 x 21
60
60257
3 x 21
60
60607
1/4 x 18
40
60017
1/2 x 18
120
60064
1 x 21
80
60258
3 x 21
80
60608
1/4 x 18
50
60018
1/2 x 24
36
60086
1 x 21
100
60259
3 x 21
100
60609
1/4 x 18
60
60019
1/2 x 24
40
60087
1 x 21
120
60260
3 x 21
120
60610
1/4 x 18
80
60020
1/2 x 24
50
60088
1 x 30
36
61094
3 x 24
36
60646
1/4 x 18
100
60021
1/2 x 24
60
60089
1 x 30
40
61095
3 x 24
40
60647
Pipe
Hangers
1/4 x 18
120
60022
1/2 x 24
80
60090
1 x 30
50
61096
3 x 24
50
60648
1/4 x 24
36
60030
1/2 x 24
100
60091
1 x 30
60
61097
3 x 24
60
60649
1/4 x 24
40
60031
1/2 x 24
120
60092
1 x 30
80
61098
3 x 24
80
60650
1/4 x 24
50
60032
3/4 x 18
36
60114
1 x 30
100
61099
3 x 24
100
60651
1/4 x 24
60
60033
3/4 x 18
40
60115
1 x 30
120
61100
3 x 24
120
60652
Tools
1/4 x 24
80
60034
3/4 x 18
50
60116
1 x 42
36
60310
4 x 21
36
57601
1/4 x 24
100
60035
3/4 x 18
60
60117
1 x 42
40
60311
4 x 21
40
57602
1/4 x 24
120
60036
3/4 x 18
80
60118
1 x 42
50
60312
4 x 21
50
57603
3/8 x 13
36
61121
3/4 x 18
100
60119
1 x 42
60
60313
4 x 21
60
57604
3/8 x 13
40
61122
3/4 x 18
120
60120
1 x 42
80
60314
4 x 21
80
57605
3/8 x 13
50
61123
3/4 x 20-1/2
36
60128
1 x 42
100
60315
4 x 21
100
57606
Abrasives
3/8 x 13
60
61124
3/4 x 20-1/2
40
60129
1 x 42
120
60316
4 x 21
120
57607
3/8 x 13
80
61125
3/4 x 20-1/2
50
60130
1 x 42
150
60316
4 x 24
36
60842
3/8 x 13
100
61126
3/4 x 20-1/2
60
60131
1 x 42
180
60317
4 x 24
40
60843
3/8 x 13
120
61127
3/4 x 20-1/2
80
60132
1 x 42
220
60318
4 x 24
50
60844
1/2 x 12
36
60044
3/4 x 20-1/2
100
60133
1 x 42
240
60320
4 x 24
60
60845
OnSite
Supply
1/2 x 12
40
60045
3/4 x 20-1/2
120
60134
1 x 42
320
60322
4 x 24
80
60846
1/2 x 12
50
60046
1 x 12
36
60141
1-1/2 x 60
36
61133
4 x 24
100
60847
60848
1/2 x 12
60
60047
1 x 12
40
60142
1-1/2 x 60
40
61134
4 x 24
120
1/2 x 12
80
60048
1 x 12
50
60143
1-1/2 x 60
50
61135
6 x 48
24
61023
1/2 x 12
100
60049
1 x 12
60
60144
1-1/2 x 60
60
61135
6 x 48
36
61024
Safety
1/2 x 12
120
60050
1 x 12
80
60145
1-1/2 x 60
80
61137
6 x 48
40
61025
1/2 x 18
36
60058
1 x 12
100
60146
1-1/2 x 60
100
61138
6 x 48
50
61026
1/2 x 18
40
60059
1 x 12
120
60147
1-1/2 x 60
120
61139
6 x 48
60
61027
1/2 x 18
50
60060
1 x 21
36
60254
3 x 21
36
60604
6 x 48
80
61028
1/2 x 18
60
60061
1 x 21
40
60255
3 x 21
40
60605
6 x 48
100
61029
1/2 x 18
80
60062
1 x 21
50
60256
3 x 21
50
60606
6 x 48
120
61030
Rentals
474
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Surface Conditioning Belts
Fasteners
Abrasive Belts
Anchors
Non-woven synthetic fiber impregnated with abrasive grain for surface conditioning
without damage to or removal of base material - resists loading and heat build-up.
Offered in very narrow widths - excellent for use on tight radii and hard to reach applications.
Flexible yet extra durable splice method - resists breaking or cracking under severe stress.
Also for: Fiberglass and Rubber
• General purpose
• Excellent for blending and cleaning
• Reduce uneven edges on adjoining
surfaces
• Remove coatings, gaskets, and surface
discolorations
Threaded
Rod
• Coarse
• Excellent for deburring, blending
• For use on mill marks, tool marks, to
create a
smooth transition on surface profiles
Blue - Very Fine
Primary application: Stainless Steel
Size
(Inch)
Secondary application: Ferrous and/or
Non-Ferrous Materials
Very fine
Excellent for cleaning and finishing
Reduce surface roughness
Polish welds
Use to apply cosmetic grain or scratch
patterns
Washington D.C.
877-419-2755
Pkg.
Qty.
77510
77511
77512
10
1/2 x 24
77515
77516
77517
10
3/4 x 18
77520
77521
77522
10
3/4 x 20-1/2
77575
77576
77577
10
3-1/2 x 15-1/2
77500
77501
77502
10
1 x 42
77525
77526
-
10
2 x 48
77530
77531
-
10
2 x 60
77535
77536
-
10
2 x 132
77550
77551
-
5
3 x 21
77570
77571
77572
10
3 x 24
77560
77561
77562
10
3 x 132
77555
77556
-
5
4 x 24
77565
77566
77567
10
6 x 48
77540
77541
-
5
Redhead Adhesive
Anchoring System
See pages 74-79.
Philadelphia, PA
610-647-8070
Very Fine
Blue
Boston , MA
800-645-6155
OnSite
Supply
•
•
•
•
•
1/2 x 18
Medium
Maroon
Galvanizing
Compounds and
Primers
See page 543.
Hartford, CT
800-969-0285
Safety
Also for: Fiberglass and Rubber
Coarse
Brown
Pipe
Hangers
Also for: Fiberglass and Rubber
Tools
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials
Abrasives
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials
Strut
Maroon - Medium
475
Rentals
Brown - Coarse
Fasteners
Surface conditioning Discs
Sait-Lok™ and Sait-Lok-R™ Surface Conditioning Discs
Brown - Coarse
Anchors
Primary application: Stainless Steel
Sait-Lok™
All metal attachment on disc ensures a secure
fit to the backing pad
Sait-Lok-R
™
Nylon screw threaded hub for easy mounting
to the backing pad
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass, Gaskets.
•• Heavy duty
•• Excellent for de-burring, blending,
cleaning and polishing
Strut
Maroon - Medium
Primary application: Stainless Steel
Size
(Inch)
Threaded
Rod
1-1/2
2
Pipe
Hangers
3
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Part Numbers
Grade
Color
Sait-Lok™
Sait-Lok-R™
Pkg. Qty.
Also for: Fiberglass, Gaskets.
Coarse
Brown
77200
77300
50
Medium
Maroon
77202
77302
50
Very Fine
Blue
77203
77303
50
Coarse
Brown
77206
77306
50
Blue - Very Fine
Medium
Maroon
77208
77308
50
Primary application: Stainless Steel
Very Fine
Blue
77209
77309
50
Coarse
Brown
77212
77312
25
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Medium
Maroon
77214
77314
25
Very Fine
Blue
77215
77315
25
•• General purpose
•• Excellent for de-burring, blending,
cleaning and polishing
Also for: Fiberglass, Gaskets.
•• Very fine
•• Excellent for cleaning and finishing
Sand-Light™ Surface Conditioning Discs
Tools
Hook and loop fastening system allows for
quick changes and less downtime.
Non-woven synthetic fiber impregnated
with abrasive grain for surface conditioning
without damage to or removal of base
material.
Brown - Coarse
Primary application: Stainless Steel, High
Tensile Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass
Abrasives
•• Heavy duty
•• Excellent for removing surface coatings
and contaminants, including rust
Maroon - Medium
Primary application: Stainless Steel, High
Tensile Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
OnSite
Supply
Size
4
Safety
4-1/2
5
Rentals
476
Grade
Color
Part No.
Coarse
Brown
77116
Size
Color
Part No.
Coarse
Brown
77130
Also for: Fiberglass
•• General purpose
•• Excellent for removing surface coatings
and light rust
Medium
Maroon
77117
Medium
Maroon
77132
Very Fine
Blue
77115
Very Fine
Blue
77134
Coarse
Brown
77118
Coarse
Brown
77136
Medium
Maroon
77120
Medium
Maroon
77138
Very Fine
Blue
77122
Very Fine
Blue
77140
Coarse
Brown
77124
Coarse
Brown
77142
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Medium
Maroon
77126
Medium
Maroon
77144
Also for: Fiberglass
Very Fine
Blue
77128
Very Fine
Blue
77146
Hartford, CT
800-969-0285
6
Grade
7
8
Boston , MA
800-645-6155
Blue - Very Fine
Primary application: Stainless Steel, High
Tensile Steel
•• Very fine
•• Excellent for blending and finishing
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
3A
Sait-Lok™
Primary application: Stainless Steel, High Tensile Steel, Titanium
All metal attachment on disc
ensures a secure fit to the
backing pad
Secondary application: Ferrous and/or Non-Ferrous Materials.
••
••
••
••
Premium aluminum oxide grain
Fast stock removal
Cooling agents for cool cutting and long life
Easy disc changes by twisting to unlock
backing pad
Anchors
Sait-Lok™ and Sait-Lok-R™ Specialty Laminated Discs
Fasteners
Sait-Lok™ / Sait-Lok-R™
Sait-Lok-R™
Nylon screw threaded hub for
easy mounting to the backing
pad
Strut
Z
Primary application: Stainless Steel, High Tensile Steel
3A
Z
Grit
3A
Z
3A
Z
Pkg.
Qty.
36
50208
—
—
—
100
36
50222
55222
50271
55271
100
40
50209
—
—
—
100
40
50223
55223
50272
55272
100
50
50210
—
60
50211
—
—
—
100
50
50224
55224
50273
55273
100
—
—
100
60
50225
55225
50274
55274
100
2
80
50212
—
—
—
100
80
50226
55226
50275
55275
100
100
50213
—
—
—
100
100
50227
—
50276
—
100
120
50214
—
—
—
100
120
50228
—
50277
—
100
36
50215
55215
50264
55264
100
36
50229
55229
50278
55278
50
40
50216
55216
50265
55265
100
40
50230
55230
50279
55279
50
50
50217
55217
50266
55266
100
50
50231
55231
50280
55280
50
60
50218
55218
50267
55267
100
60
50232
55232
50281
55281
50
80
50219
55219
50268
55268
100
80
50233
55233
50282
55282
50
100
50220
—
50269
—
100
100
50234
—
50283
—
50
120
50221
—
50270
—
100
120
50235
—
50284
—
50
3
Sait-Lok™ / Sait-Lok-R™ Backing Pads
Sait-Lok™ Backing Pads for
Laminated and Surface Conditioning Discs
Size
Part No.
•• For use with Sait-Lok-R™
laminated (shown above) and
surface conditioning discs
•• 1/4" shank
•• Nylon threaded hub of disc
twists into backing pad for
secure fit
•• Minimizes change-over
downtime
Size
Part No.
1" Medium
95165
1-1/2" Hard
95266
1-1/2" Medium
95166
2" Hard
95267
2" Medium
95167
3" Hard
95268
3" Medium
95168
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Size
OnSite
Supply
•• 1/4" shank
•• For use with Sait-Lok™
laminated (shown above) and
surface conditioning discs
•• Disc twists into metal
threaded center of backing
pad for fast and easy disc
changes
Sait-Lok-R™ Backing Pads for
Laminated and Surface Conditioning Discs
Size
Part No.
Part No.
1-1/2" Medium
95171
2" Hard
95272
2" Medium
95172
3" Hard
95273
3" Medium
95173
3'" Hard
95268
1-1/2" Medium
95271
Boston , MA
800-645-6155
Pipe
Hangers
Z
Tools
1-1/2
3A
Sait—Lok—R™
Sait—Lok™
Size
(Inch)
Hartford, CT
800-969-0285
477
Safety
1
Grit
Pkg.
Qty.
Rentals
Sait—Lok—R™
Sait—Lok™
Size
(Inch)
Abrasives
•• Premium zirconium grain
•• Very fast stock removal, long life
•• Easy disc changes by twisting to unlock
backing pad
Threaded
Rod
Secondary application: Ferrous and/or Non-Ferrous Materials.
Fasteners
Fiber Discs
Aluminum Oxide and Specialty Discs
Anchors
3A Aluminum Oxide
3Z Specialty Fiber Discs
Primary application: Stainless Steel, High
Tensile Steel, Titanium, Aluminum
Primary application: Stainless Steel, High
Tensile Steel, Titanium, Aluminum
Secondary application: Ferrous Metals
Secondary application: Ferrous and/or
Non-Ferrous Metals
Strut
•• Premium aluminum oxide grain with
grinding aid
•• Special aluminum oxide grain to reduce
heat build up and reduce loading
•• Closed coat structure for more material
removal and better finishing
2A Aluminum Oxide
Grit
Threaded
Rod
Primary application: Ferrous and/or NonFerrous metals
Secondary application: Wood,
Fiberglass, etc.
3A 4-1/2" x 7/8"
•• Aluminum oxide grain
•• General purpose
•• Closed coat structure for more
material removal and better finishing
Grit
Part No.
Pipe
Hangers
2A 4" x 5/8"
Grit
Part No.
Grit
3A 4-1/2" x 7/8"
36
52890
100
52894
50
52891
120
52895
60
52892
3A 7 x 7/8"
80
52893
36
16
57016
36
56036
24
57024
36
52836
36
56036
50
-
50
56050
60
58360
60
56060
80
58380
80
56080
100
-
100
56100
120
-
120
56120
36
58680
58280
100
-
Tools
80
100
56100
80
57080
56120
100
57100
Z Zirconium Fiber Discs
120
57120
Primary application: stainless steel, high
tensile alloys
2A 9-1/8" x 7/8"
Abrasives
24
51024
36
51036
16
58016
50
51050
24
58024
60
51060
36
58036
80
51080
50
58050
100
51100
60
58060
120
51120
80
58080
100
58100
120
58120
OnSite
Supply
Safety
60
53060
80
53080
100
53100
120
53120
Rentals
100
-
120
51120
Secondary application: ferrous and/or nonferrous metals (iron, steel,
welds, etc.)
•• Zirconium grain
•• Closed coat structure for aggressive
stock material and long life
Grit
Part No.
Z 4-1/2" x 7/8"
Part No.
Z 7" x 7/8"
59224
24
59624
36
59236
36
59636
50
59250
50
59650
60
59260
60
59660
80
59280
80
59680
Z & 3Z
Z 9-1/8" x 7/8"
Z 5" x 7/8"
Hartford, CT
800-969-0285
Grit
24
24
59324
24
59824
36
59336
36
59836
50
59350
50
59850
60
59360
60
59860
59380
80
59880
80
478
58660
80
57060
53050
-
-
60
50
50
58260
56080
53036
58236
50
80
36
58636
57036
57050
53024
3Z 7" x 7/8"
60
50
24
58336
36
3Z 4-1/2" x 7/8"
56060
2A 5" x 7/8"
Part No.
36
60
120
Grit
3Z 5" x 7/8"
56024
24
60
2A 4-1/2" x 7/8"
Part No.
2A 4" x 5/8"
2A 7" x 7/8"
56024
56050
Grit
Part No.
24
50
Part No.
•• Premium zirconium grain
•• Special zirconium grain to reduce heat
build up and reduce loading
•• Closed coat structure for very
aggressive material removal
Boston , MA
800-645-6155
2A & 3A
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Sait-Lok™ and Sait-Lok-R™ Specialty Laminated Discs
PSA Backing Pads
Med
Hard
5/8-11 Thread
-
95010
-
12,000
*4-1/2
5/8
-
95011
-
11,000
4-1/2
1/2
-
95012
-
11,000
4-1/2
10 mm
-
95013
-
11,000
4-1/2
14 mm
-
95015
-
11,000
5
5/8
-
95016
-
10,000
7
5/8-11 Thread
95017
-
-
7,000
7
5/8-11 Thread
-
95018
95019
8,500
9
5/8-11 Thread
95020
95021
95022
6,500
95060
5 x 5/16-24 5/hole
95085
95061
6 x 5/16-24
95066
3 x 1/4
95062
6 x 5/16-24 6/hole
95086
4 x 1/4
95063
7 x 5/8-11
95068
5 x 1/4
95064
8 x 5/8-11
95067
5 x 5/16-24
95065
Size (Inch)
Part No.
Sand-LightTM Surface
Conditioning Backing Pads
• For use with hook and loop style
Sand-Light™ discs
• 1/4" shank pads
• Threaded pads for dual action
random orbital sanders
• Threaded pads for right angle
grinders/sanders
Sait-Lok™ Backing Pads for Resin Fiber Discs
Size (Inch)
•• Smooth face backing pad for
Sait-Lok™ fiber discs
•• Minimizes change-over downtime
•• Complete with mounting hardware
•• Supplied with nut and washers
•• 5/8-11 arbor
•• Low profile for short spindles
Part No.
95023
4-1/2
95025
5*
95024
5
95026
7
95027
9
95028
95154
4-1/2 x 5/8-11
95159
95153
5 x 5/8-11
95160
4 x 5/16-24
95157
6 x 5/8-11
95161
5 x 5/16-24
95155
7 x 5/8-11
95162
6 x 5/16-24
95156
8 x 5/8-11
95163
Hook and Loop Backing Pads for
Paper Discs
Note: Sait-Lok™
disc must be used
with threaded
backing pad
• For use with hook and loop backed paper
discs
Size (Inch)
Center Nuts
•• For attaching fiber discs to backing pad and
tool
•• Use small* for 4", 4-1/2", 5" dia. pads
•• Use large* for 7", 9" dia. pads
Size
4 x 1/4
5 x 1/4
Part No.
Size
5 x 5/16-24
95047
Size (Inch)
Part No.
5 x 5/16-24 5/hole
95057
6 x 5/16-24
95046
5 x 5/16-24 8/hole
95058
6 x 5/16-24 6/hole
95056
Spanner Wrench
Part No.
• Adjustable wrench for tightening and
loosening center nuts
• Fits all center nuts
95040
M10 x 1.25
95043
5/8-11 Large*
95041
M10 x 1.5
95044
Description
1/2-13
95042
M14 x 2.0
95045
Spanner Wrench
5/8-11 Small*
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Part No.
Safety
Size (Inch)
4-1/2*
Part No.
Strut
1-1/2 x 1/4
2 x 1/4
Threaded
Rod
Soft
4
Part No.
Pipe
Hangers
Arbor
Max
RPM
Size (Inch)
Tools
Part Number
Size
(inch)
Part No.
Abrasives
backing pad is not
to be used with Sait-Lok™
quick change fiber discs
Size (Inch)
Boston , MA
800-645-6155
OnSite
Supply
Notes:
Pad nut
as
indicated
must be purchased
specify
nut: No.
separately. This
95043
Anchors
• For use with PSA adhesive
backed sanding discs
• 1/4" shank pads
• Threaded pads for dual action/
random orbital sanders and right
angle grinders/sanders
•• Spiralcool™ backing pads’
exclusive rubber, fabric, and
fiber board construction
provide extra strength and
reliability
•• Spiral ribs provide contact points
and form channels for air flow
extending disc life 30% to 50%
•• Each pad is supplied with a nut
•• For the 10 mm arbor pad
95044 for 1.5 nut or No.
for 1.25 nut
•• No. 95011 also for use on
Saitblend™ discs
Part No.
95008
Hartford, CT
800-969-0285
479
Rentals
Backing Pads for Resin
Fiber Discs
Fasteners
Backing Pads / Accessories
Fasteners
Convolute Wheels / Unitized Wheels
Convulate Wheels
Anchors
Primary applications: Ferrous and/or Non-Ferrous Metals
Secondary application: Aluminum, Stainless Steel, High Tensile Materials
••
••
••
••
••
Dense, non-woven construction for long lasting wear and high edge durability
Smooth running for less operator fatigue
Non-metallic for no work-piece contamination
Smear-resistant formulation to greatly reduce the possibility of smearing
Provides best durability, stock removal, and finest finish for increased productivity
Deburring 8S-F Medium Density
Strut
•• Excellent starting point for general purpose de-burring, blending, and weld polishing
•• Silicon carbide grain for fast cut rate and finest finish
•• Comparable to competitive 8SF products
Deburring 9S-F Hard Density
Threaded
Rod
•• Excellent for aggressive de-burring, blending
•• Silicon carbide grain for fast cut rate and finest finish
•• Comparable to competitive 9SF products
Size (In)
6 x 1/2 x 1
6x1x1
6x1x1
8x1x3
Spec.
9SF
8SF
9SF
9SF
Density
Hard
Medium
Hard
Medium
Grain
Silicon Carbide
Silicon Carbide
Silicon Carbide
Silicon Carbide
Grade
Fine
Fine
Fine
Fine
Max. RPM
6,000
6,000
6,000
4,500
Part No.
77810
77815
77820
77825
Note: Wheels
must be run in
the direction
of the arrow as
indicated on the
wheel.
Qty./Box
4
3
3
3
Pipe
Hangers
Unitized Wheels and Unitized Type 27 Discs
Series 731 - Medium Density, Fine Grade
•• Aluminum Oxide Grain
•• Light pressure for blending and finishing
•• High edge durability and high degree of stock removal, while
maintaining bright finish
•• Smaller contact area than the 632 series
Series 732 - Medium Density, Fine Grade
Tools
Primary application: Stainless Steel, Aluminum, High Tensile Steel
Secondary application: Ferrous and/or Non-Ferrous Metals
Series 524 - Soft Density, Medium Grade
•• Silicon Carbide Grain
•• Light pressure for blending and finishing
•• High edge durability, high degree of stock removal, maintains
bright finish
Series 811 - Hard Density, Coarse Grade
•• Silicon Carbide Grain
•• General purpose cleaning, finish and polishing
Abrasives
•• Aluminum Oxide Grain
•• Highest stock removal and edge breaking capability
•• Most aggressive for de-burring
Series 532 - Soft Density, Fine Grade
•• Silicon Carbide Grain
•• Requires light pressure for fine finishing and polishing
•• Highly conformable material
•• Provides clean, bright surface on stainless steel
•• Finer finish than the 524 series
Series 821 - Hard Density, Medium Grade
•• Aluminum Oxide Grain
•• High stock removal, long life, productivity, very durable on edge
Series 632 - Medium Density, Fine Grade
OnSite
Supply
•• Silicon Carbide Grain
•• Requires light pressure for fine finishing and
polishing
•• Highly conformable material
•• Provides clean bright stainless steel finishes,
blends tool marks, and removes slight surface
imperfections
Safety
Unitized wheels packaged 10 per box
Unitized Type 27 discs packaged 1 per box
Rentals
480
Hartford, CT
800-969-0285
Max
RPM
Part
No.
Size (Inch)
Series
Grain
Density
Grade
1 x 1 x 3/16
821
A/O
Hard
Med
3 x 1/2 x 1/4
821
A/O
Hard
Med
18,000 77835
95002
3 x 1/4 x 1/4
524
S/C
Soft
Med
18,000 77840
95002
30,000 77830
Mandrel
95240
3 x 1/4 x 1/4
532
S/C
Soft
Fine
18,000 77845
95002
3 x 1/4 x 1/4
632
S/C
Med
Fine
18,000 77850
95002
3 x 1/4 x 1/4
731
A/O
Med
Fine
18,000 77855
95002
3 x 1/4 x 1/4
811
A/O
Hard
Coarse
18,000 77860
95002
95002
3 x 1/4 x 1/4
821
A/O
Hard
Med
18,000 77865
4-1/2 x 7/8
732
S/C
Med
Fine
10,000 77880
—
4-1/2 x 7/8
811
A/O
Hard
Coarse
10,000 77885
—
4-1/2 x 7/8
821
A/O
Hard
Med
10,000 77890
—
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
60
80
120
60
80
120
50
60
80
100
120
50
60
80
100
120
180
240
60
80
100
120
50
60
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
95103
95103
95103
95105
95105
95105
95104
95104
95104
95105
95105
95105
95105
95105
95104
95104
95104
95104
95104
95104
95104
95103
95103
95103
95103
95105
95105
60
80
100
120
60
80
120
60
80
120
60
80
100
120
60
80
120
40
60
80
120
40
60
80
120
60
80
120
60
80
120
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
95105
95105
95105
95104
95104
95104
95104
95104
95104
95104
95104
95104
95104
95103
95103
95103
95103
95106
95106
95106
95104
95104
95104
95106
95106
95106
95106
95105
95105
95105
95107
95107
95107
95107
95106
95106
95106
95106
95102
35102
95102
95101
95101
95101
Fasteners
Pipe
Hangers
95104
95104
95104
95104
95104
95104
95104
36
40
50
60
80
100
120
180
240
320
Mandrel
Part No.
Tools
60
80
120
95105
95105
95105
95105
95105
95105
95105
80
100
120
Cartridge
Part No.
1/2 x 1 x 1/8
26,000
38064
26,000
38065
26,000
38066
1/2 x 1-1/2 x 1/8
26,000
38070
26,000
38071
26,000
38072
26,000
38073
26,000
38074
26,000
38075
26,000
38076
26,000
38077
26,000
38078
26,000
38079
1/2 x 2 x 1/8
26,000
38080
26,000
38081
26,000
38082
26,000
38083
1/2 x 2 x 3/16
26,000
38087
26,000
38088
26,000
38089
5/8 x 1-1/2 x 1/8
18,000
38093
18,000
38094
18,000
38095
5/8 x 2 x 3/16
18,000
38099
18,000
38100
18,000
38101
18,000
38102
3/4 x 1 x 1/8
18,000
38106
18,000
38107
18,000
38108
3/4 x 1-1/2 x 3/16
18,000
38112
18,000
38113
18,000
38114
18,000
38115
3/4 x 2 x 3/16
18,000
38119
18,000
38120
18,000
38121
18,000
38122
1 x 1-1/2 x 1/4
18,000
38126
18,000
38127
18,000
38128
1 x 2 x 1/4
18,000
38132
18,000
38133
18,000
38134
Max. RPM
Abrasives
60
80
100
120
180
240
320
95108
95108
95108
95108
95108
Grit
OnSite
Supply
60
80
100
120
180
240
320
Mandrel
Part No.
Safety
60
80
100
120
180
Cartridge
Part No.
3/16 x 1 x 3/32
26,000
38000
26,000
38001
26,000
38002
26,000
38003
26,000
38004
1/4 x 1 x 1/8
26,000
38007
26,000
38008
26,000
38009
26,000
38010
26,000
38011
26,000
38012
26,000
38013
1/4 x 1-1/2 x 1/8
26,000
38014
26,000
38015
26,000
38016
26,000
38017
26,000
38018
26,000
38019
26,000
38020
1/4 x 2 x 1/8
26,000
38021
26,000
38022
26,000
38023
5/16 x 1 x 1/8
26,000
38027
26,000
38028
26,000
38029
5/16 x 1-1/2 x 1/8
26,000
38033
26,000
38034
26,000
38035
3/8 x 1 x 1/8
26,000
38039
26,000
38040
26,000
38041
26,000
38042
26,000
38043
3/8 x 1-1/2 x 1/8
26,000
38047
26,000
38048
26,000
38049
26,000
38050
26,000
38051
26,000
38052
26,000
38053
3/8 x 2 x 1/8
26,000
38055
26,000
38056
26,000
38057
26,000
38058
1/2 x 1 x 1/8
26,000
38062
26,000
38063
Max. RPM
481
Rentals
Grit
Anchors
Primary applications: Ferrous and/or Non-Ferrous Metals
Secondary application: Stainless Steel, High Tensile Steel
•• Great for high speed de-burring and flash removal
•• Excellent for sanding and polishing channels, fillets, recesses, side walls and bottoms of dead-end holes
Strut
Cartridge Rolls - Straight TA-X Premium Aluminum Oxide Grain
Threaded
Rod
Cartridge Rolls
Fasteners
Cartridge Rolls / Carbide Burs
Cartridge Rolls - Full Taper
Tungsten Carbide Burs
Features
TA-X premium aluminum oxide grain
Anchors
•• Tungsten carbide construction
•• Highest quality manufacturing methods
•• Precision ground with diamond wheels
•• Great for high speed de-burring and flash
removal
•• Excellent for sanding and polishing
channels, fillets, recesses, side walls and
bottoms of dead-end holes
Cartridge
Part No.
3/8 x 1 x 1/8
26,000
38300
26,000
38301
26,000
38302
26,000
38303
3/8 x 1-1/2 x 1/8
26,000
38306
26,000
38307
26,000
38308
1/2 x 1 x 1/8
26,000
38312
26,000
38313
26,000
38314
26,000
38315
1/2 x 1-1/2 x 1/8
26,000
38318
26,000
38319
26,000
38320
26,000
38321
26,000
38322
26,000
38323
1/2 x 2 x 1/8
26,000
38326
26,000
38327
26,000
38328
5/8 x 2 x 1/8
18,000
38332
18,000
38333
18,000
38334
3/4 x 1-1/2 x 1/8
18,000
38338
18,000
38339
18,000
38340
3/8 x 2 x 1/8
26,000
38055
26,000
38056
26,000
38057
26,000
38058
3/4 x 2 x 3/16
18,000
38344
18,000
38345
18,000
38346
Grit
Max. RPM
Strut
60
80
120
180
Threaded
Rod
60
80
120
60
80
120
180
Pipe
Hangers
50
60
80
100
120
180
Tools
60
80
120
60
80
120
Abrasives
60
80
120
60
80
100
120
OnSite
Supply
60
80
120
Benefits
Mandrel
Part No.
•• Long life and durability
•• Delivers vibration-free operation
•• Produces very sharp uniform cutting edges
95105
95105
95105
95105
95104
95104
95104
SA SC SD SE SF SG SL SM
Type
95105
95105
95105
95105
95104
95104
95104
95104
95104
95104
95103
95103
95103
95103
95103
95103
95104
95104
95104
95103
95103
95103
95103
95106
95106
95106
Safety
Rentals
Hartford, CT
800-969-0285
Shank Dia.
Part No.
SA1
1/4
5/8
1/4
SAI45000
SA3
3/8
3/4
1/4
SAI45001
SA5
1/2
1
1/4
SAI45002
SC1
1/4
5/8
1/4
SAI45005
SC3
3/8
3/4
1/4
SAI45006
SC5
1/2
1
1/4
SAI45007
SD1
1/4
7/32
1/4
SAI45010
SD3
3/8
5/16
1/4
SAI45011
SD5
1/2
7/16
1/4
SAI45012
SE1
1/4
3/8
1/4
SAI45015
SE5
1/2
7/8
1/4
SAI45016
SL1
1/4
5/8
1/4
SAI45025
SL3
3/8
1-1/16
1/4
SAI45026
SL4
1/2
1-1/8
1/4
SAI45027
SG1
1/4
5/8
1/4
SAI45030
SG3
3/8
3/4
1/4
SAI45031
SG5
1/2
1
1/4
SAI45032
SM1
1/4
1/2
1/4
SAI45035
SM2
1/4
3/4
1/4
SAI45036
SM4
3/8
3/4
1/4
SAI45037
SM5
1/2
1
1/4
SAI45038
Non-Ferrous (Aluminum)
SA3NF
3/8
3/4
1/4
SAI45050
SA5NF
SC3NF
1/2
1
1/4
SAI45051
3/8
3/4
1/4
SAI45052
SF3NF
3/8
3/4
1/4
SAI45053
SF4NF
1/2
1
1/4
SAI45054
SF5NF
1/2
1-1/8
1/4
SAI45055
•• For use with straight and full taper cartridge rolls
Length
Double Cut (Alternate Cut)
Cartridge Roll Mandrel
482
Size Dia.
Boston , MA
800-645-6155
Size (Inch)
1/4 x 1-1/2 x 1/4
1/4 x 1 x 1/4
1/8 x 1-1/2 x 1/4
1/8 x 1 x 1/4
1/8 x 3/4 x 1/4
3/16 x 1-1/2 x 1/4
3/16 x 1x 1/4
3/32 x 3/4 x 1/4
Part No.
95101
95102
95103
95104
95105
95106
95107
95108
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Wire Wheels
Anchors
High Speed Mini-Grinder Crimped Wire Wheel Brushes - 4" Dia.
Wire
Size
Threaded Arbor
Hole Size
Arbor Hole
Nut Color
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4"
.014"
5/8-11
Steel
15000
82195
82316
Strut
Crimped wire wheel brushes are less aggressivethan knot wire type for lighter-duty applications. Crimped
wire is more flexible, and leaves a superior surface finish. For weld cleaning, scale, rust, paint, adhesive and
oxidation removal, cleaning, light deburring, and flash removal, etc. Call for other Bore/Thread sizes.
Brush
Dia.
Fasteners
Wire Wheels
High Speed Mini-Grinder Standard Twist Knot Wire Wheel Brushes
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4"
4"
5"
6"
6"
.014"
.020"
.020"
.014"
.023"
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
22
22
24
33
33
20000
20000
15000
9000
20000
82153
82154
82470
82471
82473
82283
82284
82596
—
82598
COMBITWIST® Knot Wire Wheel Brushes
Brush
Dia.
Wire
Size
Arbor
Hole Size
Face
Width
# of
Knots
Trim
Length
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4"
.014"
5/8-11
5/8"
22
7/8"
20000
82383
82412
4"
.020"
5/8-11
5/8"
22
7/8"
20000
82384
82413
5"
.020"
5/8-11
5/8"
24
1-1/8"
15000
82680
82749
6"
.014"
5/8-11
5/8"
33
2-1/8"
9000
82681
—
6"
.023"
5/8-11
5/8"
33
1-1/4"
9000
82683
82753
Tools
For heavy-duty metalworking applications (descaling,rust removal, deburring, weld dressing, removal of adhesive residue). Innovative
COMBITWIST® knot design dramatically improves brush performance over conventional standard twist knot styles. COMBITWIST®
knots maintain their form longer, even when used on edges and in corners.
Stringer Bead Twist Knot Wire Wheel Brushes
Wire
Size
Arbor
Hole Size
Face
Width
# of
Knots
Trim
Length
MSFS
MAX
RPM
Steel
Part No.
Stainless Steel
Part No.
4"
.020"
5/8-11"
3/16"
32
3/4"
20000
82186
82307
4-7/8"
.020"
5/8-11"
3/16"
48
3/4"
15000
82483
82608
6"
.020"
5/8-11"
3/116"
48
1-1/8"
12500
82487
82612
OnSite
Supply
Stringer bead twist knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass
weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is desired for controlled,
confined surface contact area. Root and hot pass weld cleaning, applications requiring most aggressive brushing action.
Brush
Dia.
This catalog is comprised mostly of items we carry in stock. NEFCO adds new items to
its inventory regularly. If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Pipe
Hangers
# of
Knots
Abrasives
Threaded Arbor
Hole Size
483
Safety
Wire
Size
Rentals
Brush
Dia.
Threaded
Rod
Standard twist knot wheel brushes with a threaded nut for easy change-up. Features loosely twisted knots for aggressive brushing
action with a good surface finish. They are ideal when heavy-duty or severe cleaning is required. For weld cleaning, weld spatter
removal, scale removal, cleaning, deburring, and flash removal. 5/8" face width.
Fasteners
Bench Grinding Wheels / Wire Scratch Brushes
Type 1 Bench Grinding Wheels
Anchors
A
GC
Primary application: Ferrous Metals
(Carbon Steel, Steel, Iron,Forgings, etc.)
Primary application: Ferrous and/or NonFerrous Metals
•• Aluminum oxide grain
•• General purpose
•• For sharpening tools and light stock
removal
•• Green silicon carbide grain
•• Extremely sharp grain for faster, burr
free cutting
•• Use on carbide tipped tools, cast iron
Strut
Aluminum Oxide
Threaded
Rod
Dia.
6"
6"
6"
7"
7"
8"
8"
10"
10"
12"
14"
Width
1/2"
3/4"
1"
3/4"
1"
3/4"
1"
1"
1-1/2"
2"
2"
Pipe
Hangers
Tools
Bore
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
Max. RPM
4138
4138
4138
3600
3600
3600
3600
2483
2483
2069
1773
A24
—
—
—
—
—
—
—
—
—
SAI28060
SAI28070
A36
SAI28003
SAI28000
SAI28006
SAI28010
SAI28013
SAI28020
SAI28023
SAI28040
SAI28050
SAI28063
SAI28073
A46
—
—
—
—
—
—
—
SAI28043
SAI28053
SAI28061
SAI28071
Bore
1
1
1
1
1
1-1/4
1-1/2
1-1/2
RPM
4138
4138
3600
3600
2483
2483
2069
1773
GC60
SAI28100
SAI28103
SAI28113
SAI28123
SAI28140
SAI28150
SAI28160
SAI28170
GC80
SAI28101
SAI28104
SAI28114
SAI28124
SAI28141
SAI28151
SAI28161
SAI28171
GC120
SAI28102
SAI28105
SAI28115
SAI28125
SAI28142
SAI28152
SAI28162
SAI28172
A60
SAI28004
SAI28001
SAI28007
SAI28011
SAI28014
SAI28021
SAI28024
SAI28041
SAI28051
SAI28062
SAI28072
A80
SAI28005
SAI28002
SAI28008
SAI28012
SAI28015
SAI28022
SAI28025
SAI28042
SAI28052
—
—
Green Silicon Carbide
Dia.
6
6
7
8
10
10
12
14
Width
3/4
1
1
1
1
1-1/2
2
2
Premium Fine Counter Duster
Heavy Duty Coarse Counter Duster
Abrasives
•• For fine or light applications
Excellent shop brushes for heavier material
removal general factory and store dusting.
Material
Trim
Length
Length of
Brush Part
Std Pkg
Part No.
Black
Horsehair
2-1/2"
8"
12
89390
Curved Handle Scratch Brush
Material
Trim
Length
Length of
Brush Part
Std Pkg
Part No.
Black
Tampico
2-1/2"
8"
12
89402
Shoe Handle Wire Scratch Brushes
OnSite
Supply
•• 13-3/4" Overall Length; with Scraper
•• Carbon Steel Wire Fill Material 1-3/16" Length
•• 10" Overall Length; 1-3/16" Trim Length
•• Carbon Steel Wire
Block
Width
Wire Rows
Length of
Brush Part
Carbon
Steel P/N
Stainless
Steel P/N
Block
Width
Wire Rows
Length of
Brush Part
Std Pkg
7/8"
7/8"
3 x 19
3 x 19
6"
6-1/4"
85045
85003
85047
with scraper
1-1/8"
4 x 16
5"
12
Safety
Standard Straight Back Block Brush
Part No.
85033
Small Cleaning Scratch Brush
•• 7-1/2" Overall Length
•• Bronze or Stainless Wire Fill Material
•• 1/2" Trim Length
•• 7-14" Overall Length
•• Carbon Steel Wire Fill Material 1-3/16" Length
Rentals
Block
Width
Wire Rows
Trim
Length
Std Pkg
Part No.
Block
Width
Wire Rows
Length of
Brush Part
Bronze
P/N
Stainless
Steel P/N
2-1/4"
6 x 19
1-3/4"
12
85082
1/2"
3x7
1-1/2"
85056
85055
484
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Primary application: For general
scale removal, cleaning and surface
preparation
•• Dense, compact crimped steel wire
brush face
•• May be stacked to achieve wider
work face
•• Standard 2" arbor, with adaptor to
listed arbor
•• Includes brushing pairs to adapt to
variety of arbors
•• Additional arbors available (** Not available for part number
09558 and 09555)
Large Diameter Wheels
Wire Brushes - Packaged 1 per pkg.
Arbor
Face Trim
Max. Industrial
Width Length RPM Part No.
Blue LineTM
Part No.
Dia.
Arbor
Grit
Face
Width
Trim
Length
Max
RPM
Part
No.
3"
5/8"
80
1/2"
5/8"
20,000
04110
6
.014
5/8, 1/2 Wide
6
6
.014
.008
5/8, 1/2 Narrow 1-3/16 6,000 09558**
5/8, 1/2 Narrow 1-1/16 6,000 09555**
06558
06555
7
8
.014
.014
5/8
5/8
Wide
Wide
1-9/16 6,000 09559
1-1/2 4,000 01411
06559
06556
10
.014
3/4
Wide
2
-
20,000
04120
4"
5/8"
120
5/8"
3/4"
12,000
04130
4"
5/8"
180
5/8"
3/4"
12,000
04140
6"
2"
120
7/8"
1-1/16"
6,000
04150
6"
2"
180
7/8"
1-1/16"
6,000
04160
Small Diameter Wheels
•• Packaged (4) per box
3,600 09560
Additional Arbors Available
Part No.
Size
Part No.
Dia.
Arbor
Grit
Face
Width
Trim
Length
Max
RPM
Part
No.
1-1/2"
1/2"
320
1/4"
1/4"
20,000
04210
2"
5/8"
120
3/8"
7/16"
15,000
04220
2-1/2"
5/8"
120
3/8"
11/16"
15,000
04230
Primary Application: For fast cleaning of
large surfaces
2-1/2"
5/8"
320
3/8"
11/16"
15,000
04240
Available in:
Cup Brushes
•• Packaged (1) per box
Dia.
Arbor
Grit
Trim
Length
Max
RPM
Part
No.
4"
5/8-11
80
1-1/2"
6,000
04310
6"
5/8-11
80
1-1/2"
6,000
04340
End Brushes
Dia.
Grit
Trim
Length
Overall
Length
Max
RPM
Part
No.
Pkg.
Qty.
1"
120
1"
2-3/4"
19,000
04380
12
1"
80
1"
2-3/4"
19,000
04390
6
Overall
Length
Part
No.
Pkg.
Qty.
Tube Brushes
Dia.
Grit
1/2"
80
2"
5"
04270
12
1"
80
2-1/2"
5-1/2"
04275
12
1-1/4"
80
2-1/2"
5-1/2"
04280
12
5/8"
120
2"
5"
04285
12
1"
120
2-1/2"
5-1/2"
04290
12
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Size
95201
2 x 1/2
95206
95203
2 x 5/8
95207
95204
2 x 3/4
** Not available for Part Nos. 09558 and 09555
2x1
2 x 1-1/4
Large Cup Brushes
Tools
5/8"
•• Knot wire for low to medium flexibility
and aggressive cutting action
•• Crimped wire which has higher
flexibility for light cleaning and
removal, especially on irregular surfaces
Knot Wire
Size
Dia. Wire Arbor
4
.020 5/8-11
4
.020 5/8-11
6
.020 5/8-11
6
.035 5/8-11
6
.020 5/8-11
6
.035 5/8-11
6
.020 5/8-11
* 302 stainless steel
Trim
Rows Length
1
1-3/8
1
Stainless*
1
1-3/4
1
1-3/4
2
1-3/4
2
1-3/4
1
Stainless*
wire used
Max.
RPM
Industrial
Part No.
Blue
Line™
Part No.
9,000
9,000
6,600
6,600
6,000
6,000
6,000
03407
03406
03409
03410
03411
03412
03413
06407
06406
06409
06410
06411
06412
06413
Abrasives
1/2"
OnSite
Supply
320
Crimped Wire
Size
Dia. Wire Arbor
Rows
Trim
Max.
Length RPM
Industrial
Part No.
Blue
Line™
Part No.
4
5
5
6
-
-
Stainless*
-
1-1/8
1-1/2
1-1/2
1-1/2
09551
09552
09554
09553
06551
06554
06553
.020
.020
.020
.020
Boston , MA
800-645-6155
5/8-11
5/8-11
5/8-11
5/8-11
Hartford, CT
800-969-0285
9,000
8,000
8,000
6,600
485
Safety
5/8"
06557
Rentals
3"
1-1/16 6,000 09557
Threaded
Rod
Wire
Dia. Size
Pipe
Hangers
•• Packaged (1) per box
Trim
Length
Fasteners
•• Excellent for mechanical
finishing operations
•• Brushes can be used on both
external and internal surface
areas
•• Unique nylon filaments are
impregnated with abrasive grain
•• Available in silicon carbide
grain for a wide range of
applications
•• Use on steel, aluminum,
copper, brass, stainless steel, super alloys, plastics,
composites, ceramics, wood and leather
Anchors
Wire Brushes for Bench or
Straight Shaft Grinders
Nylon Abrasive Brushes
Strut
Nylon / Wire Brushes
Fasteners
Wire / End Brushes
Crimped Wire Cup Brushes
For light duty application and surface cleaning. Flat brushing, edge cleaning, and flash removal. They
are designed for 4-1/2" and 5" grinders.
Anchors
Brush
Dia.
2-3/4"
3-1/2"
4"
Wire
Size
.014"
.014"
.014"
Threaded Arbor
Hole Sizes
5/8-11
5/8-11
5/8-11
Trim
Length
7/8"
7/8"
1-1/4"
MSFS
MAX RPM
14000
12500
9000
Carbon Steel
Part No.
82243
82249
82510
Stainless Steel
Part No.
82353
82359
—
4"
.020"
5/8-11
1-1/4"
9000
85211
82635
5"
6"
.020"
.020"
5/8-11
5/8-11
1-1/4"
1-1/4"
8000
6000
82515
82517
82637
82638
Strut
Knot Wire Cup Brushes
For use on large surfaces where a great deal of roughing is required. Good for corners and angles, and
removal of contaminants such as scale, concrete, slag, and marine growth
Threaded
Rod
Pipe
Hangers
Brush
Dia.
Wire
Size
2-3/4"
2-3/4"
3-1/2"
4"
4"
4"
5"
6"
6"
.014"
.020"
.014"
.014"
.020"
.035"
.023"
.023"
.023"
Threaded
Arbor
Hole Sizes
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
Brush
Dia.
1/2"
Tools
3/4"
Abrasives
Crimped Wire End Brushes
General purpose for working hard-to-reach places. For
use on portable air and electric tools. Used for rubber
and plastic flash removal, paint and rust removal, die,
mold and tool polishing.
1"
OnSite
Supply
Brush
Dia.
1/2"
3/4"
Safety
Knot Wire End Brushes
For heavy-duty and severe applications, recessed
areas and corners such as weld and mold cleaning.
Rentals
486
Hartford, CT
800-969-0285
1"
Trim
Length
MSFS
MAX RPM
Carbon Steel
Part No.
7/8"
7/8"
7/8"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
14000
14000
12000
9000
9000
9000
7000
6000
6000
82219
82220
82231
82522
82523
82524
82529
82531
82532
Wire
Size
.006"
.008"
.010
.014
.020
.006"
.008"
.010
.014
.020
.006"
.008"
.010
.014
.020
Brush
Length
Shank
Dia.
MSFS MAX
RPM
1"
1/4"
25000
1"
1/4"
20000
1"
1/4"
20000
Wire
Size
.006"
.010
.014
.006"
.010
.014
.020
.006"
.010
.014
.020
Brush
Length
Shank
Dia.
MSFS MAX
RPM
1-1/8"
1/4"
25000
1-1/8"
1/4"
20000
1-1/8"
1/4"
20000
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Stainless
Steel Part
No.
82329
82330
82341
82647
82648
—
82652
82654
—
Steel
Part No.
82962
82963
82964
82965
82966
82967
82968
82969
82970
82971
82972
82973
82974
82975
82976
Stainless
Part No.
82981
82982
82983
82984
82985
82986
82987
82988
82989
82990
82991
82992
82993
82994
82994
Steel
Part No.
83063
83064
83065
83070
83071
83072
83073
83077
83078
83079
83080
Stainless
Part No.
83085
83086
83087
83090
83091
83092
83093
83096
83097
83098
83099
Philadelphia, PA
610-647-8070
Knot and Crimped Wire Wheels
For use on Small Grinders
Carbon Steel P/N
Stainless Steel P/N
.006 Fine
83107
83283
.014 Medium
83108
83284
.020 Coarse
83109
83285
Anchors
Material
Max RPM
Part No.
4
.014
Carbon
20,000
03426
4
.020
Carbon
20,000
03460
4
.014
Stainless*
20,000
03431
4
.020
Stainless*
20,000
03461
Stringer Bead
Available in:
•• Knot wire for low to medium flexibility and aggressive cutting
action
•• Crimped carbon steel wire for light
cleaning and where greater flexibility
required
•• Stainless steel wire for use on
stainless, aluminum, and high
strength alloys
4
.020
Carbon
20,000
03440
4
.020
Stainless*
20,000
03445
5
.020
Carbon
12,000
03380
5
.020
Stainless*
12,000
03382
.014
Carbon
12,500
03450
Crimped
4
*302 stainless steel wire used
Miscellaneous Brushes
Metal Chip Brush
Tools
Cup Brushes For use on Small Grinders
•• Durable, long lasting
•• For cleaning metal chips from
work surfaces
•• Standard Arbor: 5/8-11
•• Variety of threaded arbors available
Dia.
Wire
Size
Style
Material
Max
RPM
Part
No.
2-3/4"
.014
Knot
Carbon
12,500
03414
2-3/4"
.020
Knot
Carbon
12,500
03501
2-3/4"
.014
Knot
Stainless*
12,500
03419
2-3/4"
.020
Knot
Stainless*
12,500
03506
2-3/4"
.014
Crimped
Carbon
12,500
01401
2-3/4"
.014
Crimped
Stainless*
12,500
01408
3-1/2"
.020
Knot
Carbon
12,500
03511
3-1/2"
.020
Knot
Stainless*
12,500
03512
3-1/2"
.014
Crimped
Carbon
12,500
03513
3-1/2"
.014
Crimped
Stainless*
12,500
03514
Acid Brushes
•• Quality horsehair bristles
•• Machine trimmed and
crimped to specification
Paint Brushes
•• Quality horsehair bristles
•• Wood handle
Brush Type
Metal chip
Acid brush
*302 stainless steel wire used
Paint brush
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
Philadelphia, PA
610-647-8070
Strut
Wire Size
Washington D.C.
877-419-2755
Abrasives
Wire Size
Diameter
Regular Twist
Threaded
Rod
All brushes - Diameter: 1/4", Shank Diameter: 1/4", Trim
Length: 1-1/8", Overall Length: 2-3/4", MSFS Max RPM: 20000
•• Standard Arbor: 5/8-11; Std Packaging: 6
•• Variety of threaded arbors available
Pipe
Hangers
Medium: .014 for general purpose removal with good finish
Coarse: .020 for most aggressive brushing action where surface
finish is not critical.
Width
1-1/2
Trim
Length
1-1/2
Part No.
Std.
Pkg.
5-5/16
00510
12
3/8
3/4
6
00501
144
7/16
3/16
6-1/2
00502
144
144
9/16
7/8
6-1/8
00503
1/2
1-1/2
7
00511
72
1
1-1/2
7-1/2
00512
72
1-1/2
1-1/2
7-1/2
00513
72
2
1-1/2
7-1/2
00514
72
3
1-1/2
8
00515
48
4
2-1/4
9-1/2
00516
12
9-1/2
05765
12
V Groove
3 x 14
Scratch
Wire Size:.012
Boston , MA
800-645-6155
Overall
Length
Hartford, CT
800-969-0285
487
OnSite
Supply
Fine: .006 for light brushing action and superior surface finish.
Safety
A single, twisted wire knot, designed especially for brushing
internal corners and edges where access is limited. The strength
of the knotted wire allows adequate pressure to be applied
to quickly remove rust, scale, corrosion, etc. with ease from
these formerly troublesome areas. Available in carbon steel and
stainless steel wire in 3 sizes:
Available in:
•• Regular twist covers more surface
area in a single pass
•• Stringer bead twist excellent for
welds, flux removal and where a
narrow work face is required
•• Crimped carbon steel wire provides
flexibility and a wider work face than
knot style
•• Stainless steel wire for use on stainless,
aluminum, and high strength alloys
Rentals
Singletwist® Knot Wire End Brush
Fasteners
Wire Wheels / Brushes
Fasteners
Internal (Tube) Brushes
Helituf® Crimped Wire Internal Brushes
•• Heavily Filled - Rugged Brushing Tools
•• Suitable for use by hand or in Power Tools
Anchors
Applications:
Cleaning the entire inside circumference of a hole - cleaning out threaded areas
- Brushing edges of keyways and other recesses
Working Brush
Diameter
Wire Size
Length of Brush
Stem Diameter
Overall Length
Steel Part No.
Stainless Steel
Part No.
Strut
1/4"
.005"
1"
1/8"
3-1/2"
36012
—
3/8"
.005"
1"
1/8"
3-1/2"
—
36147
7/16"
.005"
1"
1/8"
3-1/2"
—
36151
1/2"
.005"
1"
1/8"
3-1/2"
36032
36155
5/8"
.005"
1"
1/8"
3-1/2"
36042
36163
Threaded
Rod
11/16"
.005"
1"
1/8"
3-1/2"
36047
—
7/8"
.005"
1"
1/8"
3-1/2"
—
36179
1"
.005"
1"
1/8"
3-1/2"
36072
—
Note: Stainless brushes above have stainless stems.
Round Wire Double Spiral Flue Brushes
Pipe
Hangers
Primarily used for internal cleaning of pipes or flues
Applications:
Tools
•• Manual or power cleaning of pipes and flues
•• All standard flues are referred to by their
outside measurements which are usually 1/4"
larger than the inside diameter.
•• An Osborn flue brush to fit a standard flue is
also designated by the flue’s outside diameter.
•• For example: The diameter of a 3" flue brush
is approximately 2-3/4" or the inside diameter
of a standard 3" flue.
Flue Size
Exact Size
Wire size
Brush Length
Part No.
3/4
1/2
.010
4-1/2
51060*
1-1/4
1
.010
4-1/2
51064
1-1/2
1-1/4
.0118
4-1/2
51065
1-3/4
1-1/2
.0118
4-1/2
51066
2
1-3/4
.0118
4-1/2
51067
3
2-3/4
.014
4-1/2
51071
*All Flue Brushes are fitted with 1/4" standard nipples except No. 51060 (3/4" flue
size) which has a 1/8" nipple.
Crimped Wire Tube Brushes - Double Stem - Double Spiral
Abrasives
•• Can be used for numerous internal cleaning jobs
Applications:
Internal cleaning, removal of small imperfections,
surface preparation
OnSite
Supply
Can also be used as a Hand Tool Mounted in a Drill
Press or on a Portable Power Tool
Diameter
Wire
Size
Brush
Length
Overall
Length
Steel
Part No.
Stainless Steel
Part No.
1/2"
.006"
2"
5"
51021
—
5/8"
.006"
2"
5"
—
51088
5/8"
.0104"
2"
5""
51024
51090
3/4"
.0104"
2-1/2"
5
51027
51093
7/8"
.006"
2-1/2"
5"
51028
—
7/8"
.0104"
2-1/2"
5"
51030
51096
Crimped Wire Tube Brush
Nylon Tube/Spout Brushes
Safety
Rentals
Brush
Diameter
Bristle
Diameter
Brush
Length
Overall
Length
Part No.
1/4"
.005"
2"
6-1/4"
51100
Brush
Diameter
Bristle
Diameter
Brush
Length
Overall
Length
Part No.
1-1/2"
.010"
5"
15-1/2"
51106
3/8"
.006"
1-1/2"
8"
51006
2"
.010"
5"
15-1/2"
51108
488
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Maintenance & Shop Supplies
Aerosol Chemicals . . . . . . . . . . 555
Bandsaw Blades . . . . . . . 596 -597
Bandsaw Blade Selection
Guide . . . . . . . . . . . . . . . . . . . 596
Bessey Clamps . . . . . . . 588 - 589
Carr Lane . . . . . . . . . . . . . . . . 585
Clean-Up / Brooms . . . . . . . . . 551
Fans . . . . . . . . . . . . . . . . . . . . 562
Industrial Lubricants . . . . . 555
Mops . . . . . . . . . . . . . . . . . . . 550
Sawing Fluids / Lubricants . . . . 598
Sorbents . . . . . . . . . . . . . . . . . 558
Vacuum Cleaners . . . . . . . . . . . 557
Vises . . . . . . . . . . . . . . . . . . . . 586
Wilton Clamps . . . . . . . . . . . . . 587
Wipers . . . . . . . . . . . . . . . . . . 556
Products for Roofing 590 - 595
Fasteners
Pipe
Hangers
Tools
Cement . . . . . . . . . . . . . . . . . . 566
Cold Weather Supplies /
Batteries . . . . . . . . . . . . . . . . . 530
Brushes . . . . . . . . . . . . . . . . . . 545
DeWalt® Storage Boxes . . . . . . 536
Extension Cords . . . . . . . . . . . 527
Fencing, Temporary . . . . . . . . . 566
Floor Protection . . . . . . 539 - 540
Garbage Cans . . . . . . . . . . . . . 549
Greenlee® Storage Boxes 532 - 534
Hammers / Bars . . . . . . . . . . . 565
Hose Accessories . . . . . . . . . . 561
Hoses . . . . . . . . . . . . . . 560 - 561
Igloo® Water Coolers . . . . . . . . 561
Jobox® Storage Boxes . . . . . . . 535
Ladders . . . . . . . . . . . . . 524 - 526
Markers . . . . . . . . . . . . 542 - 543
MasterLock® . . . . . . . . . . . . . . 537
Portable Lighting, Flashlights,
Light Strings . . . . . . . . . 527 - 529
Pumps, Sump, Trash . . . . . . . . 559
Paints . . . . . . . . . . . . . . 543 - 544
Rakes . . . . . . . . . . . . . . . . . . . 565
Rope . . . . . . . . . . . . . . . . . . . . 573
Safety Cans . . . . . . . . . . . . . . . 563
Scaffolds . . . . . . . . . . . . . . . . . 526
Shovels / Scoops . . . . . . . . . . . 564
Silicone Caulk . . . . . . . . . . . . . 544
Spray Paint . . . . . . . . . . . . . . . 543
Surface Protection . . . . . 538 - 540
Tape . . . . . . . . . . . . . . . 541 - 542
Tarps / Sheeting. . . . . . . . . . . . 538
Temp. Power Distribution Centers
. . . . . . . . . . . . . . . . . . . . . . . .531
Two-Way Radios . . . . . . 583 - 584
Wheel Barrows / Mixing Pans 566
Wire Rope & Accessories 571 - 573
Abrasives
On-Site Tools & Equipment
Material Handling
Carts . . . . . . . . . . . . . . . 547 - 548
Chain and Accessories 574 - 576
Chain Slings . . . . . . . . . . . . . . .579
CM Hoists . . . . . . . . . . . 577 - 578
CM Pullers . . . . . . . . . . . . . . . 576
EL-405 Stacker Lift . . . . . . . . . 547
Eyebolts . . . . . . . . . . . . 569 - 570
LugAll Hoists . . . . . . . . . . . . . . 580
Machinery Eye Bolts / U-Bolts 570
Material Handling . . . . . . . . . . 567
Material Lifts . . . . . . . . 546 - 547
Nylon Slings . . . . . . . . . 581 - 582
Turnbuckles . . . . . . . . . . 568 - 569
Wire Rope Slings . . . . . . . . . . . 580
Safety
CEP
Access Doors . . . . . . . . 506 - 521
Cadweld® Grounding Connections /
Cadweld® Plus . . . . . . . . 503 - 505
Firestop - Grace - IPC . . 500 - 502
Firestop - STI . . . . . . . . 490 - 499
Link Seals / Innerlynx . . 522 - 523
Hartford, CT
800-969-0285
489
Rentals
Specialty Products
OnSite
Supply
On-Site Supplies
Threaded
Rod
Strut
Anchors
Quick Reference
Fasteners
firestopping selector guide - sti
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
• Metallic Pipes
• Loose Cables
Intumescent Sealants • Cable Trays
• Bus Duct
Series SSS
Series LCI
• Multiple Pipes
• Insulated Pipes
• Plastic Pipes
Intumescent Collars
Series SSC
Series LCC
• Plastic Pipes
Combustible Penetrants
(Factory Manufactured)
Intumescent Putty,
Putty Pads
Series SSP or EP
• Metallic Pipes
• Loose Cables
• Electrical Boxes
Small openings in all
constructions
(easy retrofit) electrical boxes
(pads or inserts)
Firestop Pillows
Series SSB
• Cable Tray
• Power, Voice, Data Cables
• Fan Coils
Medium to large openings
(easy retrofit)
Intumescent Wrap Strips • Insulated Pipes
Series SSW
• Plastic Pipes
Elastomeric Spray
Series AS
Elastomeric Sealant
Series ES
Silicone Sealant
Series PEN300
Silicone Foam Series
PEN200
Fire Rated Mortar
Series SSM
1
2
3
4
5
6
7
8
9
Safety
10
Rentals
490
Medium to small openings
in all constructions
Combustible Penetrants
(field fabricated)
• Control/Expansion Joints
(Wall and Floor)
• Slab Edge Conditions
• Head of Wall - Concrete
Architectural joints,
Fluted Deck to Gypsum Wall non-combustible piping
• Head of Wall - Concrete Slab (spray applied)
to Masonry Wall
• Metallic Pipes
• Steel Ducts
• Control/Expansion Joints
(Wall and Floor)
• Slab Edge Conditions
• Head of Wall - Concrete
Fluted Deck to Gypsum Wall Architectural joints
• Head of Wall - Concrete Slab
to Masonry Wall
• Joints and Gaps in
Sound Barriers
• Safing and Construction Gaps
• Seismic Joints
Construction joints, pipes with
• Curtain Wall Joints
high temperature or movement
• Metallic, Steam Pipes
• Cable Trays
• Insulated Pipes
Large openings through
• Bus Duct
concrete floors and walls
• Plastic Pipes
• Multiple Pipes
• Cable Trays
• Multiple Pipes
Large openings through
• Bus Duct
concrete floors and walls
• Insulated Pipes
• Plastic Pipes
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
SpecSeal® Series
LCI Intumescent
Sealant SpecSeal® Series
SSP Intumescent Putty
SpecSeal® Series
SSB Pillows
Premium grade latex based,
Intumescent Sealant
Standard grade latex based,
Intumescent Sealant
Soft, pliable,
Intumescent Putty
Compressible, lightweight,
Intumescent Pillows
Strut
Anchors
SpecSeal® Series
SSS Intumescent Sealant
Fasteners
firestopping selector guide - sti / specseal
• Piping: Non-combustible steel or
iron
• Jacketed Cables
• Loose Cable: Power, voice, data
• Cable Trays: Steel and aluminum
• Multiple Cable Trays Piping: Fan
coil units
• Innerducts
• One side access
Pipe
Hangers
Tested and Classified for
Fire Resistance
• Metallic Pipes including steel, iron
or copper pipe and tubing
• Non-metallic Pipes, Conduits and
Tubing including PVC, CPVC, ABS,
and PEX
• Electrical and Electronic Cabling
including service entrance, power
distribution, computer, telephone,
and television
• Metal Ductwork including HVAC,
bath and dryer vents
• Insulated Pipes including heating,
cooling, and condensation
applications
• Complete Wood Floor firestopping
package for electrical, plumbing,
HVAC, telephone and television
Threaded
Rod
Applications
Tested and Classified for
Fire Resistance
• Metallic Pipes including steel, iron
or copper pipe and tubing through
all common constructions
• Non-metallic Pipes, Conduits and
Tubing including PVC, CPVC, PVDF,
PEX, PEX-AL-PEX, ABS, PB through
all common constructions
• Cable, Cable Trays and Bus Duct
• HVAC Ductwork
• Insulated Pipes
• Multi-Service Penetrations
including AC line sets, electrical,
telephone, or TV service entrance
and interior penetrations
• Complete Wood Floor firestopping
package for electrical, plumbing,
HVAC, TV and telephone
• Small to medium sized openings
through all common constructions
• 2-Stage expansion = fast acting
protection for combustible
penetrants
• High solids content = no shrinkage
or cracking
• Water-based = safer to use; no
disposal problems
• Water resistant = will not reemulsify after drying
• Flexible and resilient = allows pipe
movement
• High performance…without the
high price!
• Highly intumescent…expands up to
10X
• Excellent smoke seal
• Water resistant…will not reemulsify when dry
• Water-based for easy installation,
cleanup, and disposal
• Acoustically tested…reduces noise
transmission
• Small to medium sized openings
through all common constructions
• Large to medium sized openings
through masonry walls and floors
and gypsum-board walls
Features and Benefits
• Non-hardening = easy to retrofit
• 2-stage expansion = fast acting
protection for combustible
penetrants
• Highly adhesive - adheres to all
construction materials; allows
movement
• Soft and pliable = easy installation
• Water resistant = contains minor
water spills
• High dielectric strength = an
excellent insulator
• Intumescent = expansion in all
directions means a tight seal
• Reinstallable = easy retrofit of
cables
• Lightweight = Lighter screen
requirements
• Heat Sealed Poly Bag = strong and
durable, slide in and out easier; no
sewn seams to unravel, no irritating
fiberglass
• Monolithic encapsulated core = no
loose fill, tougher, resilient
• No special tools required
Abrasives
• Small to medium sized openings
through all common constructions
Tools
Recommended Uses
* Tested to ASTM E84 (UL723) at
14% surface coverage (modified
test for sealants and caulks).
Color: Pale Red
Odor: Mild Latex
Density: 9.0 lb/gal / pH 9.0
Expansion begins: 320°F (160°C)
Volume expansion: 10X free expansion
In-Service Temp. < 130°F (54°C)
Flame-Spread: 0*
Smoke development: 5*
STC Rating: 50
VOC Content**: 0.00lb/gal (0.0 g/l)
* Tested to ASTM E84 (UL723) at
14% surface coverage (modified test
for sealants and caulks).
** ASTM D 3960 and EPA Federal
Reference Method 24
Color: Red
Solids content: 100%
Density: 1.45
Expansion begins: 230°F (110°C)
Expan. range: 230°F to > 1,000°F
(110°C to > 538°C)
Volume of expansion: > 5X (free
expansion)
Color: Red
Expansion: 1/2” in all directions
Density: 4 PCF (nominal) (53 kg/m)
In-Service Temp.: = 130°F
Flammability*: V-0
Compression**: 25%-33%
Air Leakage: Less than 1 CFM/sq ft
(L Rating) UL1479 (pillows only)
* Outer poly Bag
** As installed
Safety
Color: Red
Solids content: 80% ± 2%
Density: 9.4 lb/gal
Expansion begins: 230°F (110°C)1st
stage; 350°F (177°C) 2nd stage.
Expan. range: 230°F to > 1,000°F
(100°C to > 538°C)
Volume of expansion: > 5X (free
expansion)
Flame-Spread: 0*
Smoke developed: 10*
OnSite
Supply
Technical Data
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
491
Rentals
National Agency Approvals
Fasteners
firestopPING - sti
Series LCI Intumescent Sealants
Anchors
A Great Combination of Price and Performance in a Firestop Sealant.SpecSeal®
Series LCI is a standard grade intumescent sealant specifically engineered and
tested to economically address many
common firestop applications.
Features & Benefits:
Strut
• Economical: Intumescent performance at non-intumescent prices!
• Highly Intumescent: Expands up
to 10X
• Safe for Contact With Plastics
• Water-Based for easy installation
and cleanup.
• Water-Resistant: Will not re-emulsify
when dry.
• Acoustically Tested: Reduces
sound transmission.
• Low VOCs: Safe. No solvents.
Non-halogenated.
• Pale Red: For easy identification.
Threaded
Rod
Pipe
Hangers
Part
No.
Case
Qty.
Description
Applications
• Metallic pipes including steel,
iron, or copper pipe and tubing.
• Nonmetallic pipes, conduits &
tubing including PVC, CPVC,
ABS, & PEX.
• Electrical & electronic cabling
including service entrance,
power distribution, computer,
telephone, & television.
• Metal ductwork including HVAC,
bath and dryer vents.
• Insulated pipes including heating, cooling, and condensation
applications.
• Complete wood floor firestopping package for electrical,
plumbing, HVAC, telephone, and
television.
Wt. (lbs.)
Each
LCI300 Intumescent Sealant 10.1 oz. Tube
12
LCI305 Intumescent Sealant 5 gal Pail
1
LCI320 Intumescent Sealant 20 oz. Sausage 12
0.94
50.00
1.59
Series LCC Intumescent Firestop Collars
Tools
The economical solution for firestopping
common plastic pipe that doesn’t
compromise safety or performance.
Features & Benefits:
Abrasives
• Economical! High performance
without the high price!
• Easy Installation: Uses STI's quick
closure design.
• Expands Quickly to seal off burning penetrants.
• Highly Intumescent expands up<
to 60X.
• Safe for contact with plastics.
• Water Resistant: No soluble or
hygroscopic ingredients!
• Compact Profile: A great fit for
tight spaces!
OnSite
Supply
Part
No.
Safety
LCC150
LCC200
LCC300
LCC400
SSC600
Rentals
492
Case
Description
For
For
For
For
For
1.5”
2.0”
3.0”
4.0”
6.0”
Dia.
Dia.
Dia.
Dia.
Dia.
Plastic
Plastic
Plastic
Plastic
Plastic
Qty.
Pipe
Pipe
Pipe
Pipe
Pipe
Hartford, CT
800-969-0285
6
6
6
6
2
Applications
• Combustible penetrants (factory
manufactured).
• Protects a variety of plastic pipes
PVC, PVC Foam Core (ccPVC),
CPVC, ABS, and ABS Foam Core
(ccABS).
• Vented (DWV) and closed (electrical conduit and water supply)
installations.
Wt. (lbs.)
Each
0.22
0.25
0.49
0.73
4.67
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Power Shield™ Electrical Box Inserts
EP44
EP45
Strut
Case
Qty.
Power Shield™ Electrical Box Insert 3.75" x 3.75" x .125"
Power Shield™ Electrical Box Insert 4.25" x 4.25" x .125"
20
20
Series SSP Intumescent Putty Pads
• Seal through penetrations, construction gaps & blank openings
• Electrical boxes (metallic/nonmetallic) for sound transmission
and increased fire resistance.
• Provide a cushion to allow movement due to settling, expansion
and contraction, or vibration.
Pipe
Hangers
Convenient fire protection for throughpenetrations & electrical wall boxes,
permitting reduced spacing as well as an
increase in allowable box sizes. No other
product is as easy & versatile to use and
has tested and proven fire resistance and
acoustical properties. Conveniently sized
to fi t a typical 1-1/2" deep 4S box with
no cutting or piecing required. Faced on
both sides with a convenient poly liner.
Applications
Features & Benefits:
Part
No.
SSP4S
SSP9S
Description
Case
Qty.
Putty Pad 7.25" x 7.25" x 3/16"
Putty Pad 9" x 9" x 3/16"
20
20
Threaded
Rod
Description
• Non-Hardening for a tough, flexible seal.
• Two Stage Intumescence provides aggressive expansion.
• Endothermic Fillers absorb heat & release water.
• Highly Adhesive: Stays put! Allows movement.
• Water-Resistant: Unaffected by humidity, condensation or water.
• Soft & Pliable: Easy to install.
• Sound Deadening: Tested & proven acoustical properties.
Series SSB Intumescent Pillows
Tools
Part
No.
Abrasives
• Easy to Install!
• No Mess, No Residue!
• Rapid Expansion!
• High Volume Char: Expands Up
to 24X!
• Water Resistant: No soluble or
hydroscopic ingredients
• Conveniently Sized to fit common switch & receptacle boxes.
• Non-Conductive!
• Easy Retrofit!
• Low Profile: Maximizes area
inside box
• Labor Savings: Installs before
or after board installation.
Anchors
A one-component pad for use in electrical switch or receptacle boxes. Designed
to install inside the box, directly against
the back wall. Expands up to 24X its
original size when exposed to high temperatures or flames. Requiring no tools,
conveniently sized to fit typical switch or
outlet boxes and features an adhesive
strip applied to the back of the pad to
ensure adhesion to the back of an electrical box. Easily applied into an existing
box with no mess..
Features & Benefits
Fasteners
firestopPing - sti
Designed for easy installation and retrofitting of cables.
Part
No.
SSB14
SSB24
SSB26
SSB36
Description
Firestop
Firestop
Firestop
Firestop
Philadelphia, PA
610-647-8070
Pillow
Pillow
Pillow
Pillow
1"
2"
2"
3"
x
x
x
x
Case
Qty.
4"
4"
6"
6"
x
x
x
x
9"
9"
9"
9"
Washington D.C.
877-419-2755
20
10
22
16
Boston , MA
800-645-6155
• Medium to large to openings
through masonry walls & floors
& gypsum-board walls utilizing
data, communications, power
or control cables. innerduct and
cable trays.
• One-sided shaft walls.
Hartford, CT
800-969-0285
493
Safety
Applications
Rentals
• Intumescent: Expands in all directions for a tough, tight seal.
• Reinstallable for easy cable retrofits.
• Single Side Application - easy installation for tough access openings
• Intumescent Coated on all sides for faster expansion, easier installation.
• Heat-Sealed Poly Cover protects core & makes pillows slide in & out easily.
• Superior Air leakage Ratings!
OnSite
Supply
Features & Benefits:
Fasteners
firestopPING - sti
Cast-In Firestop Device
Create Factory-Firestopped Openings as the concrete is poured!
Anchors
Install on forms or deck in advance of the concrete pour
to form factory firestopped openings for plumbing and
electrical penetrations.
Strut
Install easily and quickly. A variety of accessories permit
installation under many common construction conditions
including variations in concrete depth and installation over
pan decks. Molded plastic body can be cut to adjust to the
depth of the pour and is tough enough to resist the rigors
of the concrete finishing process.
Threaded
Rod
The chambered intumescent system expands rapidly in
the event of fire to provide up to a three hour fire rating.
A resilient gasket system seals against the propagation of
smoke and provides additional protection against transient
water exposure.
Pipe
Hangers
Tools
Poured floor with wood forms
Features & Benefits
Applications
• Saves money by eliminating
core drilling
• Saves time. No firestopping
step required
• Provides pre-installed fire and
smoke sealing
• Provides added protection
against transient water.*
• Adapts to a wide variety of
construction conditions
• 2", 3", 4", and 6" trade size
plastic or metallic pipes
• Insulated metallic pipes
• Cable bundles
• Concrete ranging in depth from
2-1/2" to 8"
• Concrete greater than 8" using
available extension tubes
• Concrete over steel deck using
available Deck Adapter Kit
Abrasives
OnSite
Supply
Concrete over steel deck
Optional Metal Deck Kit
Extension Tubes for Concrete Greater than 8" thick
Description
Part No.
For Combustible & Noncombustible Penetrants
Safety
CD200
CD300
CD400
CD600
2" Cast-In
3" Cast-In
4" Cast-In
6" Cast-In
Firestop
Firestop
Firestop
Firestop
Device
Device
Device
Device
For Noncombustible Penetrants
Interlocking design to group
multiple devices
Rentals
494
CD200M
CD300M
CD400M
CD600M
2" Cast-In
3" Cast-In
4" Cast-In
6" Cast-In
Hartford, CT
800-969-0285
Firestop
Firestop
Firestop
Firestop
Device
Device
Device
Device
Boston , MA
800-645-6155
Description
Part No.
Extension Tubes
CD200X
CD300X
CD400X
CD600X
2" Extension
3" Extension
4" Extension
6" Extension
Tube
Tube
Tube
Tube
Deck Adapter Kits
CD200DK
CD300DK
CD400DK
CD600DK
2" Metal
3" Metal
4" Metal
6" Metal
Washington D.C.
877-419-2755
Deck
Deck
Deck
Deck
Adapter
Adapter
Adapter
Adapter
Philadelphia, PA
610-647-8070
Pipe
Hangers
Threaded
Rod
Strut
Anchors
Cast-In Firestop Device
Fasteners
firestopPing - HydroFlame
Also Available:
Made In
America
Please call for complete listing and
information.
The corrugated metal
deck sleeve removes all
the installation challenges, making the job of
forming these openings
simple while providing
a water/smoke/fire tight
firestop system.
Abrasives
• Hydro Slab Seals
• Cast-In-Place Tub Boxes
• Cast-In-Place Closet Flange
Sleeves
• Cast-In-Place Shower Drain
Sleeves
• Cast-In-Place Line Set Sleeves
• Cast-In-Place Cable Sleeves
Tools
Corrugated Metal Deck Sleeves
Penetrant
Size Range
PS-NP
CD-NP
Non-Metallic PVC, ccPVC , RNC, (ABS, ccABS 1/2" - 4")
1/2" - 6"
PS-CP
CD-CP
Non-Metallic, CPVC Flowguard Gold SDR 11, CPVC SDR 11, PEX
1/2" - 2"
PS-CN
CD-CN
Non-Metallic, CPVC Corzan, CPVC Blazemaster (13.5), CPVC SDR 13.5, CPVC Sch. 40 & 80
1/2" - 6"
PS-CT
CD-CT
Metallic, Copper
1/2" - 6"
PS-CI
CD-CI
Metallic, Cast Iron, (Service Weight)
2", 3" & 4"
PS-CH
CD-CH
Metallic, Cast Iron, (Heavy Weight)
2", 3" & 4"
PS-CX
CD-CX
Metallic, Cast Iron/Hubless
1-1/2", 2", 3" & 4"
PS-ST
CD-ST
Metallic, Steel
1/2" - 6"
PS-ET
CD-ET
Metallic, EMT
1/2" - 4"
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
495
Safety
Corrugated
Metal Deck
Rentals
Cast-in
Place
OnSite
Supply
Series
Fasteners
firestopPING - sti
Series AS200 Elastomeric Spray
The Professional's Choice For Spray-Applied Firestop Protection of Joints & Penetrations
Anchors
A non-halogenated latex-based, highly elastomeric coating designed to provide
passive smoke and fire protection in construction joints. Engineered to adhere
to virtually all construction surfaces and may be applied using air-less spray
equipment or with a brush (for small applications or touch ups). Dries to form a
flexible shield against the propagation of fire. Its premium latex binder system
is totally resistant to water and will not re-emulsify after drying. Contains no
inorganic fibers, asbestos, solvents.
Features & Benefits:
Strut
Threaded
Rod
• Highly Elastomeric for a tough, flexible seal.
• Water-Based for easy installation and cleanup.
• Fast Drying! Fastest tack-free & dry-through times.
• Auto Bonding
• Safe... No solvents or halogens.
• Water-Resistant: Will not re-emulsify when dry.
• Low Abrasion: Longer pump life with less maintenance.
• Low VOCs: Safe. No solvents. Non-halogenated.
• Paintable
• Tested with spray applied fire resistive materials (SFRM).
Applications
Pipe
Hangers
Part
No.
Case
Description
Qty.
• Construction Joints.
• Curtainwall safing gaps.
• Floor-to-floor, floor-to-wall,
wall-to-floor, wall-to-wall, and
head-of-wall applications.
Wt. (lbs.)
Each
AS205
Elastomeric Spray, 5 gallon Pail
1
50
(50 Gallon Drums Available on a Special Order Basis)
Series ES Elastomeric Sealants
Tools
A Flexible Approach to Sealing Fire-Rated Joints AND Reducing Sound Transfer!
Abrasives
A non-halogenated latex-based, highly elastomeric caulk designed to provide passive
smoke and fire protection in construction joints. This material is also designed to restore sound attenuation properties to sound-rated ceilings and partitions. Engineered
to adhere to virtually all construction surfaces and may be applied using standard
caulking equipment or by troweling. Dries to form a flexible shield against the propagation of fire. Its premium latex binder system is totally resistant to water and will not
re-emulsify after drying. Contains no inorganic fibers, asbestos, or solvents.
Features & Benefits:
OnSite
Supply
• Highly Elastomeric for a tough, flexible seal.
• Water-Based for easy installation and cleanup.
• Spray Compatible for versatility in application or repair.
• Auto Bonding
• Safe... No solvents or halogens.
• Water-Resistant: Will not re-emulsify when dry.
• Acoustically Tested: Reduces sound transmission.
• Low VOCs: Safe. No solvents. Non-halogenated.
Safety
Applications
• Construction Joints.
• Floor-to-floor, floor-to-wall,
wall-to-floor, wall-to-wall, and
head-of-wall applications.
Rentals
496
Hartford, CT
800-969-0285
Part
No.
ES100
ES105
ES120
ES129
Case
Description
Qty.
Elastomeric Sealant 10.1 oz. Tube 12
Elastomeric Sealant 5 gal. Pail
1
Elastomeric Sealant 20 oz. Sausage 12
Elastomeric Sealant 29 oz. Tube 10
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Wt. (lbs.)
Each
1.12
50.00
1.96
3.04
Philadelphia, PA
610-647-8070
Series SSM Firestop Mortar
Anchors
Strut
Threaded
Rod
Part
No.
SSM106
SSM228
Description
Wt. (lbs.)
Each
Mortar 6 gal. Pail
Mortar Bag
22
22
Series WF300 Intumescent Firestop Caulk
Applications
• Through-penetrations and gaps in
fire resistance rated wood frame
construction such as floors/csilings,
wallls and/or partitions.
Part
No.
WF310
WF305
WF320
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Case
Description
Abrasives
• Red color for easy identification.
• Waterbased for easy cleanup.
• UL Classified for 1 or 2 hours.
• Intumescent: Expands up to 5X.
• Adheres to Common Building
Materials
• Tested to ASTM E 814.
A latex based, high solids, single stage
intumescent firestop caulk. This material, when properly installed, effectively seals penetration openings in wood
frame construction against the spread
of fire, smoke and combustion byproducts. When exposed to elevated
temperatures, WF300 expands rapidly
to seal off voids left by the burning
or melting of combustible materials.
Storage stable and will not separate
or shrink when dried. Adheres tenaciously to common construction
materials such as lumber and gypsum
board as well as typical penetrant
materials, peneetrations and gaps in
fire resistance rated wood.
OnSite
Supply
Features & Benefits:
Qty.
Wt. (lbs.)
Each
Wood Frame Caulk 10.1 oz. Tube 12
Wood Frame Caulk 5 gal. Pail
1
Wood Frame Caulk 20 oz. Sausage 12
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Pipe
Hangers
• Light Weight: Less forming and support required.
• Fast Drying: Forms come down faster!
• Low Density: Easy retrofit!
• Economical: Highest yield per pound means lower
installed cost.
• Wide Range of Application: Includes aluminum cable tray.
• Red Color for easy identification and inspection.
• Chemical Adhesion reduces the need for expensive &
time consuming concrete fasteners.
• Versatile Performer for a wide range of complex applications.
Tools
Features & Benefits:
0.94
58.00
1.92
497
Safety
• Seal through-penetrations as
well as construction gaps and
blank openings.
• Wide range of penetrants including metallic pipes, cables, cable
trays (both steel and aluminum),
as well as combustible penetrants such as plastic pipes or
insulated metallic pipes.
• Suitable for openings of all sizes.
• Used in conjunction with other
SpecSeal® intumescent products.
An economical, light-weight portland
cement-based firestop product. This passive (non-intumescent) material utilizes a
combination of heat sinking and insulating properties to provide an extremely
high level of fire resistance. Mixes with
water to form a non-shrinking, high yield
mortar that may be applied by pouring, pumping, or troweling. Low density
& light weight means that less forming
as and forming support is required. Its
low density makes re-penetration for
retrofitting a simple task. Designed to
dry quickly. Will not crack or spall due to
freezing or changes in temperature.
Rentals
Applications
Fasteners
firestopPing - sti
Fasteners
firestopPING - sti
Cable Firestopping System
The World’s Most Advanced Cable Firestopping System
Anchors
• 100% Protected empty or full!
• Automatically adjusts to cable fill
• Organizes & manages cables
• Adapts to virtually any condition
• Group for increased capacity
• Wide range of accessories
Save Time & Money
Cable Management?
With the EZ-Path System, firestopping is a one-time event! No sealant,
putty, or foam pads to remove and
replace. Nothing to adjust. Nothing to
loosen and re-tighten!
The EZ-Path® System allows cable
installations to be easily organized
by type, use, or trade... Pathways
installed in walls or floors provide
managed portals through which cables
can easily be routed. Install just one
pathway or gang as required for
additional capacity or better cable
organization.
®
Strut
Threaded
Rod
The Zero-Maintenance Solution for Firestopping Cables!
UL® Classified & FM Approved in
accordance with ASTM E814 (UL1479)
Pipe
Hangers
Fire & Smoke Protection
Tools
Abrasives
• Maximum resistance to fire and
smoke whether empty or 100%
visually filled.
• Assures fire & smoke protection with
every new or retrofit cable installation.
• Superior fire & smoke leakage vs.
standard sleeve & putty systems.
• Unlike conventional sleeve & putty
system, EZ-Path® remains fire &
smoke compliant 100% of the time!
No Firestopping Required
• Built-in firestopping system automatically adjusts to the number of
cables installed.
• Design assures it is firestopped at
all stages of use.
• Mechanical application eliminates
the use of sealant, putty and other
products that need to be removed
and replaced.
Fast Acting Intumescence
• Engineered for rapid expansion when
exposed to fire or high temperatures.
• Intumescent material responds to
flames or heat by quickly sealing
the pathway and preventing the
passage of flames and smoke.
• Innovative built-in firestop design assures it is firestopped and
smoke-sealed — even at maximum
cable loading.
Series 44 Modular Floor Grid System
An EZ-Path® Solution for High Volume Cable Penetrations through Floors
OnSite
Supply
A bolt-in solution for riser applications that brings the safety and simplicity of
EZ-Path® to your vertical cable installations. The EZ-Path® Modular Floor Grid
System can handle literally thousands of cables.
Safety
Modular Floor Grid Systems utilize the high volume, EZ-Path® 44 Series Pathways installed in banks of four to provide your cabling systems with room to
grow. Sturdy steel grids mount one, two or four banks or pathways in built-in
slots for a total of up to sixteen pathways through a single floor opening. A
single bank Floor Grid comes complete with pathways. Multi-bank Modular
Floor Grids are installed with firestop panels sealing each slot. As additional
cable capacity is required, firestop panels are removed and pathway modules
containing four pathways are installed in each slot.
Rentals
498
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Designed for new or existing cable installations through up to 9" thick walls,
or floors. Extensions are available for
installation in thicker barriers. Holds up
to 120 CAT 5E cables. Can be ganged
for additional capacity. Available in
semi-custom colors. A wide variety of
accessories easily adapt to a broad
range of applications.
Designed for new or existing cable
installations through walls (only) up to 9"
thick.Holds up to 24 CAT 5E cables. Can
be mounted as a single unit in either a 2"
round or a 1.5" square opening. Sold as
a complete kit only. Includes pathway,
wall plates, gaskets, labels, required set
screws and allen key. No additional accessories are required.
EZ-Path® Fire-Rated Pathway Devices & Kits
Part No.
Description
EZD22
EZD33FWS
EZDP33FWS
EZDP133CWK
EZDP33WR
EZDP133FK
EZDP233GK
EZDP333GK
EZDP433GK
EZDP433GK-C
EZDP733GK
EZDP133CAK
EZD44
EZDP44
EZDP144FK
EZDG444
EZD444MB
Series 22 Fire-Rated Pathway Kit
Series 33 Fire-Rated Pathway Device
Series 33 Square Kit - Device with square wall plate pack
Series 33 Circular Kit - Device with circular wall plate pack
Series 33 Retro-Fit Kit - Device with retro-fit wall plate pack
Series 33 Kick in Kit - Device with kick-in plate pack
Series 33 Two-Gang Kit - Two (2) Devices with two-gang plate pack
Series 33 Three-Gang Kit - Three (3) Devices with three-gang plate pack
Series 33 Four-Gang Kit - Four (4) Devices with four-gang plate pack
Series 33 Color Coded Four-Gang Kit
Four (4) Devices ( 1-orange, 1-blue, 1-yellow, 1-white) with four-gang plate pack
Series 33 Seven-Gang Kit - Seven (7) Devices with seven-gang plate pack
Series 33 Conduit Attachment Kit-Device with conduit attachment plate pack
Series 44 Fire-Rated Pathway Device
Series 44 Fire-Rated Pathway Kit - Device with single wall plate pack
Series 44 Floor Kit - Device with floor plate pack
Series 44 Single Bank Floor Grid - Four (4) Devices with floor frame
Series 44 Single Bank of Devices - Four (4) Devices with hanger bracket
Case Qty.
Tools
Pipe
Hangers
6
6
4
1
1
1
1
1
1
Abrasives
1
1
1
4
1
1
1
1
EZ-Path® Accessories and Plate Packs
Description
EZP133W
EZP133CW
EZP233W
EZP333W
EZP433W
EZP733W
EZP133PC
EZP133K
EZP133R
EZP133CA
RCM33
EZD33E
EZP144W
EZP544W
EZP144F
EZG844
EZG1644
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Philadelphia, PA
610-647-8070
33
33
33
33
33
33
33
33
33
33
33
33
44
44
44
44
44
Case Qty.
- Single Square Wall Plate Pack
- Circular Wall Plate Pack
- Double Wall Plate Pack
- Triple Wall Plate Pack
- Four-Gang Plate Pack
- Seven-Gang Plate Pack
- One Pair (2) Positioning Clamps
- Single Kick-In Plate Pack - (For use with floor applications)
- Retro-Fit Mounting Plate Pack
- Conduit Attachment Plate Pack
- One Pair (2) Radius Control Modules
- Extension Module
- Single Wall Plate Pack
- Multi-Gang Wall Plate Pack
- Split Floor Plate Pack
- Multi-Slot Frame for Eight (8) Pathways
- Multi-Slot Frame for Sixteen (16) Pathways
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
1
1
OnSite
Supply
Part No.
Safety
Threaded
Rod
Designed for new or existing cable
installations through up to 10" thick
walls, or floors. Holds up to 240 CAT 5E
cables. Pathways can be ganged for additional capacity. Additional accessories
easily adapt 44 Series Pathways to a
broad range of applications.
Series 22
499
Rentals
Series 44
Series 33
Strut
Anchors
Cable Firestopping Pathways, Installation
Options and Accessories
Fasteners
firestopPing - sti
Fasteners
firestopPING - GRACE
FS900+ Sealant
Anchors
Elastomeric Firestop
FS1900 Sealant
Intumescent Elastomeric Firestop
FlameSafe® FS 1900 is a
high-performance, elastomeric and intumescent sealant.
A high-solids, water-based
compound engineered to
provide exceptional adhesive
and elastomeric properties
for the demanding firestop
requirements of pipe, cable,
sprinkler penetrations and
construction joints in environments subjected to frequent
expansion and contraction.
Does not contain solvents, is
not toxic and cannot damage
plastic pipes or cable jackets.
Strut
FlameSafe® FS 900+ Sealant
is cost-effective, water-based
and cures to form a flexible
shield against the spread of
fire and smoke. Available in
two grades: caulkable/trowelable (CG) and self-leveling
(SL). Contain no solvents, is
not toxic and will not damage
plastic pipes or cable jackets.
Features & Benefits:
Threaded
Rod
Pipe
Hangers
• Underwriters Laboratories classified and Factory
Mutual approved
• Firestop systems listed for through penetration and
joint systems
• Listed in systems with up to 4 hour fire rating
• Tested to UL 1479 (ASTM E814), UL 2079 (ASTM
E1966 and E1399), UL 723 (ASTM E84)
• Sound transmission tested in accordance with ASTM
E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion to a variety of
• substrates and penetrants
• No solvents, silicones or outgassing
• Elastomeric
• Self-leveling grades
Tools
Applications
Abrasives
• Metallic and Nonmetallic pipes, conduits & tubing.
• Electrical & electronic cabling.
• HVAC penetrations.
• Concrete floor-to-floor, floor-to-wall and wall-to-wall.
• Concrete, CMU and gypsum head of wall applications
requiring dynamic joint movement.
Part No.
Description
Pkg
12
Features & Benefits:
• Underwriters Laboratories classified and Factory
Mutual approved
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814), UL 2079 (ASTM
E1966 and E1399), UL 723 (ASTM E84)
• Sound transmission tested in accordance with ASTM
E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion to a variety of
• substrates and penetrants
• No solvents, silicones or outgassing
• Elastomeric
Applications
• Metallic and Non-metallic pipe, cable, conduit, cable
tray and duct penetrations through typical wall and floor
construction.
• Joints between fire-resistive assemblies (such as wall-towall, floor-to-floor and head of wall), concrete, masonry,
fluted deck and gypsum substrates, wood joist
• floor-to-ceiling and chase wall assemblies.
• Particularly suited for use where system vibration and
building movement are concerns
OnSite
Supply
66831
Caulk Tube, 10.3 oz., Red
66833
Caulk Tube, 31 oz., Red
6
66853
Caulk Tube, 31 oz., Gray
6
Part No.
66832
Sausage Pack, 20.2 oz., Red
12
66811
Caulk Tube, 10.3 oz.
66852
Sausage Pack, 20.2 oz., Gray
12
66813
Caulk Tube, 31 oz.
Description
Pkg
12
6
66835
Poly Pail, Caukable/Trowelable, 5 gal. Red
1
66812
Sausage Pack, 20.2 oz.
66855
Poly Pail, Caukable/Trowelable, 5 gal. Gray
1
66814
Poly Pail,1 gal.
1
66836
Poly Pail, Self-Leveling, 5 gal. Red
1
66815
Poly Pail, 5 gal.
1
Safety
Accessories
Part No.
Description
Pkg
Rentals
CG 1
Caulk gun, 10.3 oz tubes
1
CG 2
Caulk Gun, 1 quart
1
500
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
12
BEST SELLING
PRODUCTS
HI-LITED
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
FlameSafe® Mortar
Seal is a costeffective material available for
projects with many
large openings. A
lightweight, low
density product
that is mixed with
water for pouring,
pumping or troweling into the cavity. Mortar Seal is paintable
with alkali-resistant paint. It does not shrink, assuring a smoketight seal when cured. It has a zero flame spread and does not
contain solvents or silicones.
• Underwriters Laboratories classified and Factory
Mutual approved
• Firestop systems listed for through penetration and
joint systems
• Listed in systems with up to 4 hour fire rating
• Tested to ASTM E1399, ASTM E1966 (UL 2079),
ASTM E814 (UL 1479)
• Sound transmission tested in accordance with ASTM E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion and thickness build
• Head of Wall approvals over
• Monokote® MK-6
• Elastomeric
• Sprayable and Brushable
• No Silicones or out-gassing.
Applications
• Particularly suited for large openings with multiple
metallic or cable penetrations.
• Can be used alone for most noncombustible penetrants such as steel, copper and cast iron pipe
through the most common types of masonry construction, poured concrete floors and walls, and concrete
block walls.
• Can be used in conjunction with other FlameSafe
products for large openings where combustible
penetrants like plasticor insulated pipe require an
intumescent product.
66901
FSM Bag, 22 lbs.
66902
FSM Poly Pail, 22 lbs.
1
66872
Poly Pail, 5 gal. White
1
Mineral Wool
Part No.
MW 1
MW 24
Boston , MA
800-645-6155
Safety
Poly Pail, 5 gal. Red
Washington D.C.
877-419-2755
Fasteners
Pkg
66871
Philadelphia, PA
610-647-8070
Description
Description
Mineral Wool, 1 lb.. bag
Mineral Wool Batts, 2' x 4' x 2'
Hartford, CT
800-969-0285
501
Rentals
Description
Applications
Part No.
• FlameSafe FS 3000 has been tested for use in perimeter barrier (curtain wall) construction and head of
wall applications.
Part No.
• Underwriters Laboratories classified
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814)
• Lightweight, low density
• Non-shrinking
• Nontoxic
• Economical
• Noncombustible, non-halogenated
• No solvents
• No outgassing
• Pourable, pump-able
Pipe
Hangers
Features & Benefits:
Features & Benefits:
OnSite
Supply
FlameSafe® FS 3000 Spray is a water-based, elastomeric
firestop that is designed for spray applications onto joints
between fire-resistive assemblies and perimeter barrier (curtain wall) assemblies. Cures to a strong, flexible seal. Tested
to dynamic movement conditions in accordance with ASTM
E1399 relating to seismic, wind sway and thermal expansion/
contraction environments. Specifically formulated for ease of
application and provides an efficient solution for firestopping
joint systems.
Anchors
Smoke & Gas-Tight Seal
Tools
Spray-able Elastomeric Firestop
Strut
Mortar
Abrasives
FS3000 Spray
Threaded
Rod
firestopPing - GRACE
Fasteners
firestopPING - GRACE
Pillows
Bags
Anchors
Expandable, Through-Penetration Firestop
Strut
Threaded
Rod
FlameSafe® Bags
allow easy access
to cables, cable
trays and metallic
pipes for through
penetrations in
fire-rated floors
and walls. The
bags are filled with
a combination of
mineral fibers,
incombustible components, intumescent agents and special
fire-retardant additives. Resistive to the environment and are
effective when subjected to weather, temperature and atmospheric conditions. Unlike plastic covered pillows, FlameSafe
Bags are sealed in a durable, fiberglass mesh bag, effectively
encasing the loose fill material. FlameSafe Bags allow for multiple re-entry.
Features & Benefits:
Pipe
Hangers
Tools
• Underwriters Laboratories classified and Factory
Mutual approved
• Listed in systems with up to 3 hour fire rating
• Listed without wire mesh for concrete or gypsum wallboard
• Ideal for re-entry/retrofit, including telecommunications and computer applications
• Water and weather resistant
• Chemically inert and nontoxic
• Quick and easy installation
• Temporary or permanent use
• Field proven, durable construction
Applications
Abrasives
OnSite
Supply
• FlameSafe Bags are used as a firestop wherever penetration occurs through walls or floors to maintain fire
ratings up to 3 hours.
• They may be used during the construction phase as a temporary firestop or left in place as a permanent firestop.
• Ideal for applications where frequent retrofitting of
cables is expected, such as raised floors in telecommunication sites and computer rooms.
• Bags are approved for aluminum/steel cable trays,
fiber optic cables, telecom cables, power cables, steel
conduit and electrical wiring.
• Can be used in such substrates as masonry or gypsum
wallboard
Part No.
FlameSafe® Pillows
are a durable
firestop product
allowing easy
access to cables
and cable trays for
through-penetration in fire-rated
floors and walls.
Easy to install,
firestop pillows allow for multiple re-entry. They function through a unique phase
reaction to intumesce and seal out fire and smoke. They are an
ideal alternative to firestop large openings and are approved
for multiple cable tray applications.
Features & Benefits:
• Underwriters Laboratories classified; Factory Mut
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814)
• Ideal for re-entry/retrot installations
• Excellent for large openings
• Quick and easy installation
• Temporary or permanent use
• Chemically inert/nontoxic
• Heat and fire reactive
Applications
• Used as a firestop to maintain fire ratings up to 3
hours wherever penetration occurs through fire-rated
walls and floor assemblies.
• May be used during the construction phase as a temporary firestop or left in place as a permanent
• firestop.
• Tested in systems for 1 and 2 hour gypsum wallboard
and 2 and 3 hour concrete wall and floor assemblies.
• Cost effective solution for firestopping power cables
and data/telecommunications cable which require
retrofit.
Part No.
Safety
FSB 50 Bag, 0.5" x 7" x 13.5"
66897
FSB 75 Bag, 0.75" x 7" x 13.5"
66898
FSB150 Bag, 1.5" x 7" x 13.5"
28943
WP35/65 Insertion Plates, 1 pr each,
6" x 14" x or 3.5" x 14"
Rentals
Hartford, CT
800-969-0285
Description
66891
FSPIL1 Pillow, 6" x 9" x 1"
66892
FSPIL2 Pillow 6" x 9" x 2"
66894
FSPIL4 Pillow 6" x 9" x 4"
Be sure to visit
Description
66896
502
Removable, Reusable Firestop Seal
www.GoNefco.com
for the latest Firestopping
Products
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Cadweld FACTS
CADWELD connections are the accepted method of
attaching Cathodic Protection leads to pipes (steel or
cast iron), tanks and structures.
A CADWELD Connection . . .
• Has current carrying capacity equal to that of
the conductor.
CADWELD connections are also used for header cable
taps, conductor splices and terminations, and ground
rod connections.
• Is permanent with a low resistance connection
that cannot loosen or corrode.
• Uses lightweight, inexpensive equipment.
• Requires no external source of power or heat.
Fasteners
• Requires no special skills.
• Can be easily checked for quality.
CADWELD connections are made with a semi-permanent graphite mold, which holds the conductors to be welded. Weld
metal (a mixture of copper oxide and aluminum) is dumped into the top of the mold. The mold is covered and the weld metal
ignited. The exothermic reaction produces molten copper, which results in a permanent, high conductivity connection.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
503
Rentals
Safety
CADWELD PLUS
OnSite
Supply
CADWELD connections weld the conductors and
the structure to be protected so no galvanic corrosion
can occur at the interface. The process is specifically formulated to provide minimum heat effect on steel, which
is especially important on thin-wall, high-stress pipes.
Abrasives
The Cadweld Process
Tools
Pipe
Hangers
Threaded
Rod
Strut
Anchors
CADWELD® Grounding Systems
Fasteners
CADWELD® Grounding Systems
Connections
Anchors
Type GR - Cable
to Ground Rod
Connections
Strut
Threaded
Rod
Pipe
Hangers
Type TA - Horizontal
Tee Connections
Type PT - Parrallel
Horizontal Tee
Connections
Type SS - Horizontal
Splice Connections
Type GT - Through
Cable to To Top
of Ground Bar
Connections
Type XA - Horizontal
Splice Connections
Type LA - Cable to Lug
Connections
Type VS - Cable
to Vertical Steel
Connections
Type HS - Cable
to Horizontal Steel
Connections
Type HA - Cable
to Horizontal Steel
Connections
Cadweld Graphite Molds
A semi-permanent graphite
mold used for making Cadweld
connections. The mold controls the direction and speed
of of the molten Cadweld weld
metal flow and it'sfinal shape.
Cadweld graphite molds last
for an average of 50 or more
connections under normal
usage. The connections listed
here are only some of the
hundreds of possible connections available. Call for a FREE
Cadweld Catalog
Plus System
Tools
The ultimate welded connection that will never loosen,
corrode or increase in resistance just got BETTER:
Abrasives
OnSite
Supply
• Consists of a tamper proof, disposable, moisture-resistant weld metal cup. The weld metal, disk and ignition
source are incorporated into the self-contained package.
• Virtually unlimited shelf life.
• Completes welds at distances of up to 6 ft/1.8 meters
(up to 15 ft/4.6 meters with optional lead)
• Requires minimum components – no starting material, no
disks, no flint igniters
• Easy to handle, store and transport – by air, land or sea
in unlimited quantities
• Reduces installation time by 20%
• Has color-coded weld metal containers – by size and alloy type – for easy identification
• Has electronic ignition with a CE/UL battery powered
controller box that is designed for 600 connections with
one set of 8 standard AA batteries (included) – requiring
no special batteries or chargers
• Designed for use in standard CADWELD® molds including
CADWELD® MULTI
Safety
Proven Safety and
Proven Performance
with No Equal
Rentals
504
Installation Is Easy!
4 Simple Steps For Permanently Welded Electrical
Connections:
2
1
Insert CADWELD PLUS package
into mold (may require use of a
cover/baffle)
4
3
Press and hold control unit
switch and wait for the ignition
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Attach control unit termination
clip to ignition strip
Open the mold and remove the
expended steel cup – no special
disposal required
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Cadweld Weld Metal - Traditional
F20 Alloy for Copper to Copper and
Copper to Steel (incl. Disks)
L160
Handle Clamps
(inl. T320)
T313
Card Cleaning
Brush
Welding material consists of copper oxide and
aluminum, packaged by weight (in grams) in
plastic tubes. Each tube contains starting material at the bottom of the plastic tube. Welding
material is packaged in containers along with
metal disks. Standard welding material (F20) is packaged in tubes with clear
caps and is used for all grounding connections with the exception of those to
cast iron or rail.
Fasteners
Anchors
Materials, Tools & Accessories
Strut
CADWELD® Grounding Systems
Cadweld PLUS Weld Metal
Color Coded Containers
T403
Mold Sealer
T320
Flint Ignitor
PLUSCU
Cadweld PLUS
Control Unit
Threaded
Rod
Color
Std.
Pkg.
15PLUSF20
25PLUSF20
32PLUSF20
45PLUSF20
65PLUSF20
90PLUSF20
115PLUSF20
150PLUSF20
200PLUSF20
250PLUSF20
300PLUSPLUSF20
400PLUSF20
500PLUSF20
Black
Red
White
Light Blue
Dark Green
Gray
Orange
Dark Blue
Yellow
Purple
Light Green
Brown
Light Brown
20
20
20
20
20
10
10
10
10
10
10
10
10
15
25
32
45
65
90
115
150
200
250
use 2 x 150
use 2 x 200
500
Signal Reference Grid
For proper grounding and bonding of sensitive electronic systems, such as computer
and telecommunications installations, all
frequencies must be considered, from DC
to over 500MHz.
L111
Surefire Torch
Head
The ERITECH Signal Reference Grid is a low
impedance network of conductors which
establish an equipotential plane for high
frequency, low voltage digital signals
B160V
Chain Support
Clamp
Pipe
Hangers
Cadweld PLUS
Weld Metal
Tools
T394
Mold Cleaning
Brush
Traditional
Weld Metal
Abrasives
T321
Rasp
OnSite
Supply
T314
Cable Cleaning
Brush
Simplifies the method of making exothermic
connections by eliminating the need for starting
material or a separate disk. With the CADWELD
PLUS Control Unit, welds can be completed up
to 6 feet away. Each CADWELD PLUS package
is color coded for easy identification.
Pre-Engineered Wire Mesh and Mats
Safety
Convenient, efficient way to improve grounding
in high voltage installations and where large area
grounds are required.
Philadelphia, PA
610-647-8070
B265
Cable Clamp
Washington D.C.
877-419-2755
Call Today for complete catalog and listings of ALL
Cadweld Products - Contact your Sales Associate
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
505
Rentals
Cadweld Catalog
B396
Magnetic Handle
Clamp
Fasteners
ACCESS DOORS
Non-Rated Flush Access Doors
Anchors
UF-5000 Universal / Prime Coated and Stainless Steel
A universal flush access door for walls and ceilings. Designed for installation in drywall,
plaster, masonry, tile or any flush surface. Door panel features rounded safety corners, for an
architecturally pleasing appearance. The one-piece trim flange will not rack, sag for distort while
the continuous concealed hinge will not bind or corrode. For easy installation, the mounting frame
is 1-1/4” deep, giving maximum clearance behind the door frame.
Specifications
Strut
Threaded
Rod
Standard Sizes
Material: 16" x 16" and smaller: 16 gauge door, 18 gauge mounting frame
Over 16" x 16": 14 gauge door, 16 gauge mounting frame
Door:
Flush to frame - rounded safety corners
Frame: One piece outer flange welded to mounting frame
Hinge: Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel
Stainless Steel: Type 304- No. 4 satin polish
Pipe
Hangers
Tools
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
6 x 6
6-3/8 x 6/3/8
8 x 8
8-3/8 x 8-3/8
8 x 12
8-3/8 x 12-3/8
10 x 10
10-3/8 x 10-3/8
12 x 12
12-3/8 x 12-3/8
12 x 16
12-3/8 x 16-3/8
12 x 18
12-3/8 x 18-3/8
12 x 24
12-3/8 x 24-3/8
14 x 14
14-3/8 x 14-3/8
16 x16
16-3/8 x 16-3/8
16 x 24
16-3/8 x 16-3/8
No. of
Latches
1
1
1
1
1
2
2
2
1
2
2
Wt. per
Door (lb)
2.0
2.7
3.6
3.6
4.7
6.0
7.0
8.5
6.2
7.6
12.5
Nominal Door
Wall / Ceiling
Size (in) W x H Opening (in)
18 x 18
18-3/8 x 18-3/8
18 x 24
18-3/8 x 24-3/8
22 x 22
22-3/8 x 22-3/8
22 x 30
22-3/8 x 30-3/8
22 x 36
22-3/8 x 36-3/8
24 x 24
24-3/8 x 24-3/8
24-3/8 x 30-3/8
24 x 30
24-3/8 x 36-3/8
24 x 36
24 x 48
24-3/8 x 48-3/8
30 x 30
30-3/8 x 30-3/8
36 x 36
36-3/8 x 36-3/8
No. of
Latches
2
2
4
5
5
4
5
5
5
5
5
Wt. per
Door (lb)
11.2
15
16.3
21
26
18
22.5
26.6
38
27.5
39
DW-5040 Drywall / Prime Coated Stainless Steel
Abrasives
Designed specifically for installation in drywall walls & ceilings after drywall has been installed.
The flange of the door is a textured galvanized steel taping bead with pre-punched holes. Drywall
compound is applied over the beading at the same time the drywall joints are finished. When the
application is completed, only the door panel remains exposed. Concealed hinge & screwdriver
operated cam latches allow the door panel to operate freely with no binding, sagging or distortion.
Specifications
OnSite
Supply
Standard Sizes
Material: 14 gauge door, 14 gauge mounting frame
Door:
Flush to edge of frame
Frame: Galvanized steel drywall taping bead on all sides
Hinge:
Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel
Stainless Steel: No. 4 satin polish
Safety
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
6 x 6
6-3/8 x 6/3/8
8 x 8
8-3/8 x 8-3/8
10 x 10
10-3/8 x 10-3/8
12 x 12
12-3/8 x 12-3/8
14 x 14
14-3/8 x 14-3/8
16 x16
16-3/8 x 16-3/8
Rentals
506
No. of
Latches
1
1
1
1
1
2
Hartford, CT
800-969-0285
Wt. per
Door (lb)
3
3.5
4.5
6
7.5
9.5
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
18 x 18
18-3/8 x 18-3/8
22 x 22
22-3/8 x 22-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
30 x 30
30-3/8 x 30-3/8
36 x 36
36-3/8 x 36-3/8
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
No. of
Latches
2
4
4
5
5
5
Wt. per
Door (lb)
11.5
15
19
28
27.5
39
Philadelphia, PA
610-647-8070
PS-5030 Plaster / Prime Coated and Stainless Steel
Designed for installation in plaster walls and ceilings, before the plaster is applied. An expansion
casing bead with 3" wide galvanized lath, included as part of the frame, provides a clean, tight finish
between the frame and plaster and also adds reinforcement. The door panel is finished flush with
the plaster. Concealed hinge and screwdriver operated cam latches allow the door panel to operate
freely with no binding, sagging or distortion.
Fasteners
Non-Rated Flush Access Doors
Anchors
ACCESS DOORS
Specifications
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
6 x 6
6-3/8 x 6/3/8
8 x 8
8-3/8 x 8-3/8
10 x 10
10-3/8 x 10-3/8
12 x 12
12-3/8 x 12-3/8
14 x 14
14-3/8 x 14-3/8
16 x16
16-3/8 x 16-3/8
No. of
Latches
1
1
1
1
1
2
Wt. per
Door (lb)
3
3.5
4.5
6
7.5
9.5
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
18 x 18
18-3/8 x 18-3/8
22 x 22
22-3/8 x 22-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
30 x 30
30-3/8 x 30-3/8
36 x 36
36-3/8 x 36-3/8
No. of
Latches
2
4
4
5
5
5
Wt. per
Door (lb)
11.5
15
19
28
27.5
39
Pipe
Hangers
Standard Sizes
Threaded
Rod
Strut
Material: 14 gauge door, 14 gauage mounting frame
Flush to edge of frame
Door:
Frame: Galvanized steel drywall taping bead on all sides
Hinge: Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch. Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
AT-5020 / Prime Coated Steel
Designed for flush installation in walls or ceilings when it is required to conceal the door panel, which
is recessed 1".
Tools
Non-Rated Recessed Access Doors
Specifications
Abrasives
Material: 16 gauge door
Door:
Recessed 1"
Frame: 14 gauge
Hinge: Concealed, pivoting rod type
Latch: Flush to surface, screwdriver operated cam latch. Also available: cylinder lock and
key, allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel.
No. of
Latches
1
2
Wt. per
Door (lb)
7
13
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
No. of
Latches
2
4
Wt. per
Door (lb)
21
30
Special Sized Access Doors are AVAILABLE. Please call with your
requirements for a customized quote tailored to your specifications!
All doors are available in Stainless Steel
Safety
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
12 x 12
12-3/8 x 12-3/8
18 x 18
18-3/8 x 18-3/8
OnSite
Supply
Standard Sizes
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
507
Rentals
TURN TO THE FOLLOWING PAGES MORE ACCESS DOORS...
Fasteners
ACCESS DOORS
Non-Rated Recessed Access Doors
Anchors
DW-5015 Drywall / Prime Coated Steel
AP-5010 Plaster / Prime Coated Steel
Strut
Designed for flush installation in
drywall surfaces when it is required
to conceal the door panel, which
is recessed 1" to receive drywall.
The flange of the door is a textured
galvanized steel taping bead with prepunched holes. Drywall compound is
applied over the beading at the same
time the drywall joints are finished.
Specifications
Specifications
Material:
Threaded
Rod
Door:
Frame:
Hinge:
Latch:
Finish:
Designed for use in acoustical plaster
walls and ceilings. The door is recessed
5/8" and is lined with self-furring lath.
An expansion casing bead with 3"
wide galvanized lath, included as part
of the frame, provides a clean, tight
finish between the frame and plaster
and also adds reinforcement.
Material:
16 gauge door, 14 gauge mounting frame
Recessed 1"
Galvanized steel drywall taping bead on all sides
Concealed, pivoting rod type
Flush to surface, screwdriver operated cam latch
Also available: cylinder lock and key, allen head
cam latch, spanner head cam latch
5 stage iron phosphate preparation with prime
coat of grey baked enamel.
Door:
Frame:
Hinge:
Latch:
Finish:
Pipe
Hangers
Standard Sizes
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
12 x 12
12-3/8 x 12-3/8
18 x 18
18-3/8 x 18-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
No. of
Latches
1
2
2
4
Wt. per
Door (lb)
8.5
15
23
30
16 gauge door, 14 gauge mounting frame
Recessed 5/8" and lined with self-furring
galvanized lath edges
Expansion casing bead with 3" wide galvanized
lath, recessed 3/4" to receive plaster
Concealed, pivoting rod type
Flush to surface, screwdriver operated cam
latch. Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
5 stage iron phosphate preparation with prime
coat of grey baked enamel.
Standard Sizes
Tools
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
12-3/8 x 12-3/8
12 x 12
18 x 18
18-3/8 x 18-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
No. of
Latches
1
2
2
4
Wt. per
Door (lb)
8.5
15
23
30
Heavy-Duty Security Access Doors
Abrasives
SD-600 Heavy Duty Security Access Door
Designed for use in high security areas. Angle frame construction & 10 ga. plate door panel are ideal
for prisons, correctional facilities, housing projects etc. Standard security butt hinges are surface
welded to the door & frame. A detention type deadbolt lock with paracentric key is standard.
Specifications
Material:
Door:
OnSite
Supply
Frame:
Hinge:
Latch:
Finish:
10 gauge door, 2"x2"x3/16" angle frame
10 gauge plate, flush to edge of frame
Flange to be 2" wide, mounting frame to have anchor straps
Heavy duty butt hinges, welded to door & frame
Detention type deadbolt lock with paracentric key. Also available: tamperproof
security cam latches, cylinder lock and key. When master keying is required, doors
can be prepared for rim cylinder locks
Steel: 5-stage iron phosphate preparation with prime coat of gray baked enamel.
Stainless Steel: #4 Satin Polish
Standard Sizes
Safety
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
12 x 12
12-3/8 x 12-3/8
16 x16
16-3/8 x 16-3/8
18 x 18
18-3/8 x 18-3/8
Rentals
508
No. of
Latches
1
1
1
Hartford, CT
800-969-0285
Wt. per
Door (lb)
22
30
46
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
36 x 36
36-3/8 x 36-3/8
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
No. of
Latches
1
1
1
Wt. per
Door (lb)
70
90
120
Philadelphia, PA
610-647-8070
Fire-Rated Access Doors
Anchors
FW-5050 Walls & Ceilings / Prime Coated or Stainless Steel
Fasteners
ACCESS DOORS
Approved for use in walls and ceilings. For walls, door has a Underwriters Laboratories (UL and ULC),
1-1/2 hour "B" label, with a maximum temperature rise of 250° after 30 minutes. For use in walls when
temperature rise or heat transmission is a factor. For fire rated ceilings, door has been approved by
Warnock Hersey International for 3 hours (max. size to 24" X 36"). Available with a galvanized steel
drywall taping bead flange, (FW-5050-DW) for drywall applications,
Specifications
Material:
Door:
Frame:
Hinge:
Latch:
20 gauge door, 16 gauge mounting frame
Filled with 2" thick fire rated insulation
Flange to be 1" wide, mounting frame to have
anchor straps (optional)
Concealed
Finish:
Universal self-latching bolt, operated by either a
knurled knob or flush key. Doors can be prepared
for mortise cylinder locks for master keying
Steel: 5 stage iron phosphate preparation with
prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
Standard Sizes
No. of
Latches
1
1
1
1
1
1
1
Wt. per
Door (lb)
8
9
10
12
15
20
32
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
22 x 36
22-3/8 x 36-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
24-3/8 x 48-3/8
24 x 48
30 x 30
30-3/8 x 30-3/8
36 x 36
36-3/8 x 36-3/8
36 x 48
36-3/8 x 48-3/8
No. of
Latches
2
1
2
2
2
2
2
Wt. per
Door (lb)
35
28
38
48
38
54
76
Tools
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
8 x 8
8-3/8 x 8-3/8
10 x 10
10-3/8 x 10-3/8
12 x 12
12-3/8 x 12-3/8
14 x 14
14-3/8 x 14-3/8
16 x16
16-3/8 x 16-3/8
18 x 18
18-3/8 x 18-3/8
22 x 30
22-3/8 x 30-3/8
FW-5060 Walls / Prime Coated or Stainless Steel
Abrasives
Approved by Underwriters Laboratories (UL) for 1-1/2 hours "B" label in walls and ULC for 2 hours
"B" label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, this door should be
used when necessary to provide access in fire rated walls, when temperature rise is not a factor.
Available with galvanized steel drywall taping bead flange, (FB-5060-DW) for drywall applications.
Fire Rating
Walls:
UL - 1-1/2 hour "B" label. ULC - 2 hour "B" label. (optional)
Specifications
Material:
Door:
Frame:
Hinge:
Latch:
16 gauge door, 16 gauge mounting frame
Flush to frame with reinforced edges
Flange to be 1" wide, mounting frame to have
anchor straps (optional)
Concealed
Finish:
Threaded
Rod
UL/ULC 1-1/2 hour "B" label with 250 degree temperature rise
Warnock Hersey International - 3 hours
Pipe
Hangers
Ceilings:
Universal self-latching bolt, operated by either a
knurled knob or flush key. Doors can be prepared
for mortise cylinder locks for master keying
Steel: 5 stage iron phosphate preparation with
prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
OnSite
Supply
Walls:
Strut
Fire Rating
Philadelphia, PA
610-647-8070
No. of
Latches
1
1
1
1
1
1
1
Washington D.C.
877-419-2755
Wt. per
Door (lb)
5.5
6.7
8.3
9.5
11.5
14.3
32.5
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
22 x 36
22-3/8 x 36-3/8
24 x 24
24-3/8 x 24-3/8
24 x 36
24-3/8 x 36-3/8
24 x 48
24-3/8 x 48-3/8
30 x 30
30-3/8 x 30-3/8
36 x 36
36-3/8 x 36-3/8
36 x 48
36-3/8 x 48-3/8
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
No. of
Latches
2
1
2
2
2
2
2
Wt. per
Door (lb)
28
20.3
28.5
34
28.5
38
47.5
509
Rentals
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
8 x 8
8-3/8 x 8-3/8
10 x 10
10-3/8 x 10-3/8
12 x 12
12-3/8 x 12-3/8
14 x 14
14-3/8 x 14-3/8
16 x16
16-3/8 x 16-3/8
18 x 18
18-3/8 x 18-3/8
22 x 30
22-3/8 x 30-3/8
Safety
Standard Sizes
Fasteners
ACCESS DOORS
Duct Access Doors
Anchors
HD-5070 Hinged Duct &
CD-5080 Double- Cam Duct / Galvanized Steel
Designed to provide convenient, economical access to duct components. The
insulated door panel, along with the gasketing between the door and frame
assures a tight seal without obstruction in the air system. Available in either
hinged (HD-5070) or double cam (CD-5080) construction..
Strut
HD-5070
Standard Sizes
CD-5080
Nominal Door
Duct
Wt. per
Size (in) W x H Opening (in)
Door (lb)
6 x 6
6-3/4 x 6/3/4
1.25
8-3/4 x 8-3/4
1.75
8 x 8
10 x 10
10-3/4 x 10-3/4
2.75
12 x 12
12-3/4 x 12-3/4
3.75
14 x 14
14-3/4 x 14-3/4
4.75
16 x16
16-3/4 x 16-3/4
5.25
18 x 18
18-3/4 x 18-3/4
6.75
20 x 20
22-3/4 x 22-3/4
9
24 x 24
24-3/4 x 24-3/4
12
Specifications
24 gauge galvanized steel, double panel
24 gauge galvanized steel with 5/8" notched
knock over tabs
Hinge:
Continuous aluminum piano hinge
Door
Door panel filled with 2" fiberglass insulation
Insulation: (7.7 R factor), compressed into 1"
Door
1/8" thick by 1/2" wide closed cell neoprene
Gasketing: gasketing between door and frame
Latch:
Self-tightening, hand operated cam latch.
Door:
Frame:
Threaded
Rod
Pipe
Hangers
RD-5090 Round Duct / Galvanized Steel
Tools
Designed to provide convenient,
economical access to round ducts.
The pull and catch lock system,
along with the gasketing on the
door assures a tight seal without
obstruction in the air system.
The steel continuous piano hinge
provides for easy installation.
Elgen Round Access Door
Specifications
Door:
Hinge:
16 gauge galvanized steel
Continuous aluminum piano hinge
Door
Gasketing: 1/8” thick by 1” wide closed cell neoprene
Latch:
Plated steel pull and catch.
Finish:
Mill finish
Call With Duct Radius & Door Width To Order
Elgen Access Door Hardware Kits
#10 Ameriloc Latch
Abrasives
Access door latch is composed of Zamac #3, a
mixture of zinc and aluminum. Ideal for doors up to 4
sq. ft. Does not have an inside release lever. Supplied
with 2 Neoprene sponge gaskets to eliminate rattling
and air leakage. 1/4" dia. x 2-1/4" L
• Advanced Pre-Vessel Design
• More Effective Access Area
• No Frame to Install
• Stainless Steel and Aluminum
#15 Ameriloc Latch
• 6" to 14" Packed 10/box
Same as Ameriloc #10. The stud is long enough
to accommodate doors up to 2" thick. 3/8" dia
x 3-3/8" L
OnSite
Supply
• 16" to 24" Packed 6/box
#20 Ameriloc Latch
Designed for walk-in doors. Operable from both
sides, accommodates doors up to 2" thick. Adjustable spacer for pan type doors included. Designed
for strength and practicality. 1/2" dia. x 4" L
Stock Sizes
Safety
6" x 6"
16" x 16"
24" x 24"
8" x 8"
18" x 18"
16" x 12"
12" x 12"
20" x 20"
24" x 12"
14" x 14"
24" x 24"
#20-L Ameriloc Latch
Same as Ameriloc #20 with longer latch. 1/2"
dia. x 6" L
#30 Ameriloc Latch
Rentals
Latch with inside release handle is a heavy duty unit combining 7" front
lever operating against a wedge typed door pull. 1/2" dia. x 6-1/2"
510
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Plastic Access Doors
Anchors
Roof Hatches
PA-3000 Plastic
Part No.
Size
Material
Weight (lbs.)
G3232
24" X 24"
GALVANIZED
125
G3242
36" X 24"
GALVANIZED
135
G3844
36" X 30"
GALVANIZED
155
G4444
36" X 36"
GALVANIZED
170
G5656
48" X 48"
GALVANIZED
185
G3862
30" X 54"
GALVANIZED
225
G38104
30" X 96"
GALVANIZED
335
A3232
24" X 24"
ALUMINUM
60
A3242
36" X 24"
ALUMINUM
70
A3844
36" X 30"
ALUMINUM
85
A4444
36" X 36"
ALUMINUM
95
A5656
48" X 48"
ALUMINUM
115
A3862
30" X 54"
ALUMINUM
135
A38104
30" X 96"
ALUMINUM
245
Specifications
Material:
Door:
Frame:
Hinge:
Latch:
Finish:
1/8" high impact styrene plastic with U.V.
stabilizers
Flush to frame - rounded safety corners
One piece outside flange with 3/4" deep
mounting frame
Concealed, pivoting rod type
Snap latches allow door to fit tightly within
frame
White, with textured exposed surfaces
Standard Sizes
Nominal Door Wall / Ceiling
Size (in) W x H Opening (in)
4 x 6
4-3/8 x 6-3/8
6 x 9
6-3/8 x 9-3/8
8 x 8
8-3/8 x 8-3/8
14 x 14
14-3/8 x 14-3/8
14 x 29
14-3/8 x 29-3/8
No. of
Latches
1
2
4
5
4
Wt. per
Door (lb)
1/2
1/.2
1
26.6
18
Threaded
Rod
Safety Ladder Extension Telescoping Safety Post Safety Railing System
Pipe
Hangers
Optional Accessories:
Strut
Designed to provide easy access
to walls and ceilings. The high
impact styrene plastic with U.V.
stabilizers will not fade or corrode.
The door is completely removable
from the frame and fits tightly with
snap latches. The white finish, with
textured exposed surfaces, can be
left as is or painted to match the
surrounding areas.
Tools
Designed to provide convenient,
economical access to the roof
of a building. Available in
prime coated galvanized steel
or aluminum. Roof Hatches are
designed with safety, durability
and ease of operation in mind.
Fasteners
ACCESS DOORS
FA series aluminum floor doors are
designed for interior and exterior
applications where watertightness
is not required. The angle frame
construction with integral anchor
flange is designed to be cast into
concrete. The diamond plate door panel is equipped with
a flush aluminum drop handle and an automatic hold open
arm with red vinyl grip. Various loading capacities.
FD /FT Series Non-Hinged Floor Doors
FD Series aluminum floor doors are
designed for interior and exterior
applications where watertightness is
required. The flush diamond plate door
panel stays secured to the frame with
flat head screws and is completely
removable.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
FC Series Channel Frame Floor Doors
FC Series aluminum floor doors are designed for interior
and exterior applications where
watertightness is required. The channel
frame construction with 1 1/2" drainage
coupling and integral anchor flange is
designed to be cast into concrete. The
diamond plate door panel is equipped
with a flush aluminum drop handle and
an automatic hold open arm with red
vinyl grip. Various loading capacities.
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
511
OnSite
Supply
Designed for interior and exterior
applications that require an access
opening that will blend in with the
surrounding floor material. Available
hinged or non-hinged (to keep the
floor material from cracking or
chipping within the door panel, the securing screws are
located in the flange of the mounting frame). Available
recessed 1/8" or 1" to accommodate carpeting and vinyl,
ceramic, terrazzo tile and concrete.
Safety
FA Series Angle Frame Floor Doors
Rentals
FT Series Recessed Floor Doors
Abrasives
Floor Doors
Fasteners
ACCESS DOORS
Anchors
Access Doors
Strut
CENDREX designs and manufactures a full range of quality Access Doors, Roof Hatches,
Floor Hatches and Valve Boxes. Its philosophy of continuous improvement has enabled
CENDREX to become the most flexible and accommodating company in its field.
Line of Access Products
Threaded
Rod
General Purpose
Fire Rated
Recessed
Security
Special Application
Valve Boxes
Access Doors
pgs. 514-515
Pipe
Hangers
Access Doors
pg. 519
Access Doors
pgs. 516-518
Access Doors
pg. 520
Tools
Abrasives
Access Doors
pg. 520
pg. 520
OnSite
Supply
Floor Hatches
pg. 521
Roof Hatches
pg. 521
Safety
Rentals
512
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Cendrex manufactures custom access doors in 5 to 10 business days while
industry standards average 4 to 5 weeks
Custom access doors: Double leaf doors, Louvered doors, Wire mesh doors,
Wider flange doors, choice of sizes and material (cold roll, aluminum,
stainless...)
•
“CTR” Exclusive hidden flange door (avoids mudding)
Unmatched appearance (hidden flange);
Fast and easy installation;
No mudding and no taping saves 20 minutes versus door with corner beads.
•
In stock at your NEFCO locations
•
OnSite
Supply
For fast on-site shipment and pickup, ask your NEFCO representative for
information on standard size access doors currently in stock.
Pipe
Hangers
Custom access doors manufactured in 10 business days
LEED compliant
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Complete documentation for all categories of LEED projects prepared by
professional accredited LEED specialists in accordance with the US Green
Building Council.
513
Rentals
•
Tools
Cendrex manufactures Odd Size access doors in 5 business days while industry
standards average 3 to 4 weeks.
Abrasives
Odd Size doors manufactured in 5 business days
Threaded
Rod
Strut
THE CENDREX ADVANTAGE
•
Fasteners
Anchors
ACCESS DOORS
Fasteners
ACCESS DOORS
Anchors
General Purpose Access Doors
AHD -
Strut
FLUSH DOOR WITH 1’’ FLANGE FOR ALL SURFACE TYPES
The AHD is designed for a quick and easy installation on non-rated vertical and horizontal surfaces
made of drywall or any other type of material. Its rounded mitered corners, concealed pin hinge
and 1/4" return all around the door make it the safest and the sturdiest door on the market.
Threaded
Rod
Specifications
Pipe
Hangers
Material:
16 gauge steel
Hinge:
Hidden pin hinge
Continuous piano type over 24" (H or W)
Lock / Latch:
Screwdriver operated cam latch
Finish:
DuPont high quality grey polyester
powder coat finish
Packaging:
Wrapped in individual boxes
Tools
Options
Locks :
Abrasives
Cylinder lock and key, anti-theft screws,
Allen head hex lock, handle operated cam
latch, mortise preparation for cylinder
Material :
Stainless steel 304 #4 (brushed finish)
Finish :
White
Gasket:
Neoprene gasket
AHD-GYP – FLUSH
DOOR WITH DRYWALL
BEAD FLANGE
AHD-PLY – FLUSH
DOOR WITH PLASTER
BEAD FLANGE
OnSite
Supply
AHD Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Safety
Rentals
Door Size
W x H (in)
# Of
Locks
6x6
8x8
8 x 12
10 x 10
12 x 12
14 x 14
12 x 16
12 x 18
12 x 24
1
1
1
1
1
1
1
1
1
514
Ship
Weight
(Lbs)
2
3
4
4
5
6
6.2
7
7.5
Ship
Weight
(Lbs)
16 x 16
1
8
18 x 18
1
9
18 x 24
1
13
20 x 20
1
11
22 x 22
1
14
*22 x 30
2
16.5
*22 x 36
2
18.9
Rough wall opening is door size +1/4”
Door Size
W x H (in)
Hartford, CT
800-969-0285
# Of
Locks
Boston , MA
800-645-6155
Ship
Weight
(Lbs)
24 x 24
1
15
*24 x 30
2
20
*24 x 36
2
21
*24 x 48
2
28
*30 x 30
4
22
*36 x 36
4
31
*Piano hinge on doors over 24"
(height or width)
Door Size
W x H (in)
Washington D.C.
877-419-2755
# Of
Locks
Philadelphia, PA
610-647-8070
The CTR is the newest generation of all purpose access doors. Easy to install, it will
blend in better than any other door on all non-rated surfaces. Its special European type
hinge allows the door, with its beveled edges, to close over the flange thus avoiding the
additional labor to mud or plaster over the flange.
Specifications
16 gauge steel
Hinge:
Concealed, exclusive hinge design
Lock / Latch:
Screwdriver operated cam latch
Finish:
Phosphate dipped steel with DuPont high
quality grey polyester powder coat finish
Packaging:
Wrapped in individual boxes
Material :
Stainless steel 304 #4 (brushed finish)
Finish :
White
Gasket:
Neoprene gasket
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Ship
Weight
(Lbs)
8 1/4 x 8 1/4
1
3
8 1/4 x 12
1
4
10 x 10
1
4
12 x 12
1
6
14 x 14
1
7
12 x 18
1
8
Rough wall opening is door size +1/4”
Door Size
W x H (in)
Philadelphia, PA
610-647-8070
# Of
Locks
Door Size
W x H (in)
# Of
Locks
16 x 16
18 x 18
18 x 24
20 x 20
22 x 22
22 x 30
1
3
3
3
3
5
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Ship
Weight
(Lbs)
9
10
13
13
15
16.5
Door Size
W x H (in)
# Of
Locks
22 x 36
24 x 24
24 x 30
24 x 36
24 x 48
5
4
5
5
5
Hartford, CT
800-969-0285
Ship
Weight
(Lbs)
18.5
17
18
25
28.6
515
Fasteners
OnSite
Supply
Cylinder lock and key, anti-theft screws,
Allen head hex lock, handle operated cam
latch, mortise preparation for cylinder
Safety
Locks :
Rentals
Options
Abrasives
Tools
Material:
Threaded
Rod
CTR - EXCLUSIVE ACCESS DOOR WITH HIDDEN FLANGE FOR ALL SURFACE TYPES
Pipe
Hangers
Exclusive General Purpose Access Doors
Strut
Anchors
ACCESS DOORS
Fasteners
ACCESS DOORS
Fire Rated Access Doors
Anchors
PFI – FIRE RATED INSULATED DOOR WITH 1’’ FLANGE FOR ALL SURFACES
Strut
Threaded
Rod
The PFI is insulated with 2” thick mineral wool and can be used on fire rated walls,
ceilings and floors. It comes with a 1” flange for an easy flush installation on any type of
surface. By UL standards, once the installation is complete and the provided springs are
hooked to the back of the panel, the door will be self closing and self locking. The largest
fire rated PFI doors available for vertical and horizontal installations are respectively:
(48’’ x 48’’) and (24’’ x 36’’).
Specifications
Pipe
Hangers
Material:
16 gauge steel frame and 20 gauge satin coated
steel door. Mineral wool insulation.
Hinge:
Continuous piano hinge allows opening to 165°
Lock / Latch:
Self latching tool-key and/or ring operated latch,
both included
Finish:
DuPont high quality grey polyester powder coat
finish
Packaging:
Wrapped in individual boxes
Tools
Inside panel release and automatic panel closer are standard on the PFI
Fire Rating:
Abrasives
2 hour fire barrier, 1½ hour B label, maximum temperature rise after
30 minutes 250° F, after 60 minutes 450° F. Warnock Hersey file #:
L-14031 for ceiling one (1) hour combustible rating and three (3) hour
non-combustible rating. MEA # 507-06-M.
PFI Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
OnSite
Supply
Safety
Rentals
Ship
Weight
(Lbs)
8x8
1
7
10 x 10
1
8
12 x 12
1
10
14 x 14
1
12
16 x 16
1
14
18 x 18
1
17
22 x 22
1
20
22 x 30
1
30
22 x 36
2
34
24 x 24
1
24
24 x 36
2
36
Rough wall opening is door size +1/4”
Door Size
W x H (in)
516
# Of
Locks
Door Size
W x H (in)
* 24 x 48
* 30 x 30
* 32 x 32
* 36 x 36
* 48 x 48
*Sizes not
available for
ceiling rating
(max: 24 x 36)
Hartford, CT
800-969-0285
PFI-GYP – FIRE
RATED INSULATED
DOOR WITH
DRYWALL FLANGE
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
PFI-PLY – FIRE
RATED INSULATED
DOOR WITH
PLASTER FLANGE
Philadelphia, PA
610-647-8070
PFN - FIRE RATED UNINSULATED DOOR FOR WALLS
Threaded
Rod
The PFN is not insulated and can only be used on fire rated walls. It comes with a 1” flange
for an easy flush installation on any type of surface material. By UL standards, once the
installation is complete and the provided springs installed, this door will be self closing
and self locking. It should not be used in situations where protection against temperature
elevation is required. The largest fire rated PFN door available is: (36’’ x 36’’).
16 gauge steel frame and 20 gauge satin coated
steel door.
Hinge:
Continuous piano hinge allows opening to 165°
Lock / Latch:
Self latching tool-key and/or ring operated latch,
both included
Finish:
DuPont high quality grey polyester powder coat
finish
Packaging:
Wrapped in individual boxes
Tools
Material:
Pipe
Hangers
Specifications
Fire Rating (for walls only):
Abrasives
2 hour fire barrier, 1½ hour B label, Warnock Hersey file #:
L-14031 in conformity with the following codes: UL10b, UL-555,
ASTM E152, NFPA 252 and ULC-S104. MEA # 507-06-M.
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
OnSite
Supply
Door Size
W x H (in)
30 x 30
32 x 32
36 x 36
PFN-GYP – FIRE RATED
UNINSULATED DOOR
FOR WALL WITH
DRYWALL FLANGE
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
PFN-PLY – FIRE RATED
UNINSULATED DOOR
FOR WALL WITH
PLASTER FLANGE
517
Safety
# Of
Locks
Rentals
Ship
Weight
(Lbs)
8x8
1
7
10 x 10
1
8
12 x 12
1
10
14 x 14
1
12
16 x 16
1
14
18 x 18
1
17
22 x 22
1
20
22 x 30
1
30
22 x 36
2
34
24 x 24
1
24
24 x 36
2
36
Rough wall opening is door size +1/4”
Door Size
W x H (in)
Strut
Anchors
Fire Rated Access Doors
Fasteners
ACCESS DOORS
Fasteners
ACCESS DOORS
Anchors
PFU -
FIRE RATED INSULATED UPWARD OPENING DOOR FOR CEILINGS
Strut
The PFU is designed to be installed on fire rated ceilings only.
It can easily replace spring loaded models like the PFI. Its door,
which does not exceed 89 degrees of upward opening, falls
back by law of gravity into its locked position as required by fire
certification standards. It cuts down on installation time and
opening it becomes much easier with no spring load to deal
with. The largest fire rated PFU available is: (24’’ x 36’’).
Threaded
Rod
Fire Rating:
Pipe
Hangers
Standard Sizes (Odd sizes available upon
request, manufactured in 5 days)
Tools
Door Size W x H (in)
Ceiling Opening (in)
22 x 30
22 1/4 x 30 1/4
22 x 36
22 1/4 x 36 1/4
24 x 24
24 1/4 x 24 1/4
Clear opening with door opened = W -3½”
Rough wall opening is door size +1/4”
Abrasives
PAL -
2 hour fire barrier, 1 ½ hour B
label, maximum temperature
rise after 30 minutes 250° F
(139° C), after 60 minutes 450°
F (250° C) Warnock Hersey file
#: L-14031 MEA# 507-06-M
# of Locks
1
2
1
LIGHTWEIGHT INSULATED ALUMINUM FLUSH DOOR
OnSite
Supply
The lightweight PAL door with 1” fiberglass insulation and
neoprene gasket is ideal to reduce sound and air transfers
between partitions. The robust all aluminum construction allows
for its use in large wall or ceiling openings and where corrosion
and moisture are a concern.
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Ship
Weight
(Lbs)
8X8
1
2
12 X 12
1
3
16 X 16
1
6
Rough wall opening is door size +1/4”
Safety
Door Size
W x H (in)
Rentals
518
# Of
Locks
Hartford, CT
800-969-0285
Door Size
W x H (in)
# Of
Locks
18 X 18
24 X 24
36 X 36
1
1
2
Boston , MA
800-645-6155
Ship
Weight
(Lbs)
7
13
30
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
ACCESS DOORS
Recessed Access Doors
Specifications
16 gauge steel
Hinge:
Continuous piano hinge
Lock / Latch:
Allen hex cam latch
Finish:
Phosphate dipped steel with DuPont high
quality grey polyester powder coat finish
Packaging:
Wrapped in individual boxes
Recess
5/8" standard
Tools
Material:
Locks :
cylinder lock and key,
Material:
stainless steel 304 #4 (brushed finish)
Finish :
White
Recess:
1/2", 3/4'' (standard frame)
1", 1 1/4", 1 1/2", (special 2 1/2" frame)
Abrasives
Options
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
AHA-GYP – RECESSED
DOOR WITH DRYWALL
BEAD FLANGE
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
AHA-PLY – RECESSED
DOOR WITH PLASTER
BEAD FLANGE
519
Safety
# Of
Locks
Rentals
Ship
Weight
(Lbs)
8X8
1
3
12 X 12
1
5
16 X 16
1
9
18 X 18
1
11
24 X 24
1
16
Rough wall opening is door size +1/4”
OnSite
Supply
AHA Standard Sizes (Odd sizes available
upon request, manufactured in 5 days)
Door Size
W x H (in)
Pipe
Hangers
Threaded
Rod
The AHA standard 5/8” recessed panel will accept ceramic tile, drywall panels, acoustical
tiles or other materials to match the surface finish on which it is installed. It is also
available in different recesses of up to 1 ½” to accommodate multi layers of drywall.
Strut
AHA - RECESSED DOOR WITHOUT FLANGE
Fasteners
ACCESS DOORS
Anchors
LHD -
FLUSH HEAVY DUTY DOOR FOR LARGE OPENINGS
Strut
The LHD door with its 2 1/2” deep frame and heavy duty design is
ideal for large openings where the AHD can no longer suffice. It is
also available in a double leaf version.
Threaded
Rod
MDS -
MEDIUM SECURITY DOOR FOR ALL SURFACE TYPES
Pipe
Hangers
The MDS is a non-rated flush door with character. It is constructed
with thicker steel, a heavy duty piano hinge and a cylinder lock with
key. It is designed for mental care facilities, detention buildings or to
ensure medium security wherever it might be required.
PHS -
HIGH SECURITY DOOR FOR ALL SURFACE TYPES
Tools
The PHS is designed to be used in situations where security is of
the utmost importance. It is manufactured with detention grade
materials and can be prepped for all types of dead locks. (Cylinder
lock is optional)
Abrasives
DRD -
DRAFT STOP DOOR FOR ATTIC APPLICATION
The DRD is designed to allow passage between attic sections while
preventing back drafts from one to the other. Although not-rated, it is
self-closing and self latching and can be opened from both sides.
OnSite
Supply
BTA - BTV
Safety
VALVE BOXES WITH HIDDEN FLANGE
Thanks to its beveled door panel, the BTA valve box is
practical and aesthetically pleasing. It comes in various
sizes and depths and can be pre-drilled to accept water
pipes, gas pipes, and conduits. It is also available with a
plexiglass window in the form of a BTV.
Rentals
520
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Floor Hatches and Roof Hatches
Standard Sizes (Odd sizes available upon request)
Door Size W x H (in)
24 x 24
24 x 36
Ceiling Opening (in)
24 ½ x 24 ½
24 ½ x 36 ½
# of Locks Ship Wt. (lbs,)
1
45
1
55
TRH - STEEL ROOF HATCH
The TRH roof hatch, made of satin coated steel, is designed to offer convenient access
to building roof tops. It is exclusively equipped with gas cylinders providing an effortless
door panel opening. Its heavy duty design and insulation ensure long life and low
maintenance.
Also available:
OnSite
Supply
TRH - ALL ALUMINUM ROOF HATCH
TRH - COMBINED ALUMINUM COVER AND STEEL BASE ROOF HATCH
Standard Sizes (Odd sizes available upon request)
Door Size W x H (in)
36 x 30
36 x 36
Ceiling Opening (in)
42 x 36
42 x 42
Threaded
Rod
RECESSED ALUMINUM FLOOR HATCH
Pipe
Hangers
PPA - RE
Tools
Also available:
Abrasives
The PPA is built for interior use to provide a reliable and secure access between building
floors. Its sturdy 1/4’’ thick diamond or smooth finish aluminum door and 1/4’’ thick
aluminum construction make it the ideal solution for either existing cement floors or
poured-in-place concrete
Strut
FLUSH ALUMINUM FLOOR HATCH
# of Locks Ship Wt. (lbs,)
1
178
1
185
Safety
PPA -
Fasteners
Anchors
ACCESS DOORS
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
521
Rentals
OTHER CENDREX PRODUCTS, SIZES AND OPTIONS AVAILABLE
CONTACT YOUR NEFCO REPRESENTATIVE FOR MORE INFORMATION
Fasteners
link seals / innerlynx®
Standard Innerlynx® Models and Properties
Anchors
Strut
Innerlynx® is
shipped as
a belt of 10
interconnected
rubber links.
Threaded
Rod
See next
page for
sizing
chart
Innerlynx® Installation Instructions
Pipe
Hangers
2
1
Tools
Abrasives
Center the pipe, cable or
conduit in wall opening or
casing. Make sure the pipe
will be adequately supported
on both ends. The Innerlynx
is not intended to support
the weight of the pipe.
3
Connect both ends of the
belt assembly
around the pipe.
5
Check to be sure all bolt
heads are facing the installer. Extra slack or sag
is normal. Do not remove
links. Note: On smaller
diameter pipe links may
need to be stretched.
6
4
With a hand tool, pretighten the belt assembly
by giving each bolt about
2 turns.
7
8
OnSite
Supply
Safety
Slide belt assembly into
annular space.
Rentals
522
Start at 12 o’clock and tighten bolt until rubber begins to
“bulge.” Do not tighten any
bolt more than 4 turns at a
time. Continue in a clockwise
manner until links have been
uniformly compressed.
(Approx. 2 or 3 rotations)
Hartford, CT
800-969-0285
Make 2 or 3 more passes
at 3 turns per
bolt, tightening all bolts
clockwise.
Boston , MA
800-645-6155
Installation Complete
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
IN STOCK for
IMMEDIATE
DELIVERY!
Fasteners
link seals / innerlynx®
Innerlynx Sizing & Ordering Information
See Page 244 for
the NEW
Tools
Pipe
Hangers
Threaded
Rod
Strut
Specify:
1. Pipe outside diameter
2. Wall sleeve or core drill inside diameter
3. Model of Innerlynx
4. Specify steel or stainless steel hardware
5. Wall thickness
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
523
Rentals
Safety
OnSite
Supply
HDPE (Plastic)
Wall Sleeves
Abrasives
Infinity®
Fasteners
LADDERS
Fiberglass Stepladders
Anchors
FM1400 Series
Fiberglass Twin Front Ladder
FS1500 Series Fiberglass
Step Ladder
Heavy Duty 375 lb. Load Capacity - Type 1AA
A non-conductive fiberglass industrial
twin front ladder. Equipped with Da
Boot for slip resistant footing
Heavy Duty 300 lb. Load
Capacity - Type 1A
Strut
Non-conductive ladder designed for
everyday use by contractors and
industry.
• Heavy gauge steel hinges
• Inside spreader braces
• Heavy Double Gusset Bracing
• Spreader Brace Reinforcement
Plates
• Full channel fiberglass rail
• Riveted step construction with
Gusset
Threaded
Rod
• Molded top with tool slots
• Wide back braces
• Full channel fiberglass rail
• Double-rivet step construction
• Inside spreader braces
• Slip-resistant rubber feet
Best Seller
Pipe
Hangers
Part
No.
Size
FS1504 4'
FS1506 6'
FS1508 8'
FS1510 10'
FS1512 12'
Step
Size
Bottom
Width
Approx Approx
Spread Wt. (lbs.)
3"
3"
3"
3"
3"
19 9⁄16"
22 9⁄16"
25 9⁄16"
28 9⁄16"
31 9⁄16"
28 15⁄16"
40 7⁄8"
52 3⁄4"
64 11⁄16"
76 1⁄16"
14
20
26
34
47
Part
No.
Step Bottom
Size Size Width
FM1404HD
FM1405HD
FM1406HD
FM1407HD
FM1408HD
FM1410HD
FM1412HD
FM1414HD
FM1416HD
4'
5'
6'
7'
8'
10'
12'
14'
16'
3"
3"
3"
3"
3"
3"
3"
3"
3"
Tools
• Aluminum angle feet with
slip resistant rubber tread.
Reinforcement plates wrap
around the rail.
• Long outrigger supports spread
out the base for extra stability.
• Double rivet step construction
• Heavy duty steel gussets
• 300 lb, load capacity.
• Meets or exceeds ANSI and
OSHA safety standards.
Abrasives
• Molded top with recessed tray
• Extra heavy duty inside
spreader braces
• Double rivet step construction
• Heavy duty reinforcement
plates
• 375 lb. rated yellow rail
• Heavy double gusset bracing
OnSite
Supply
Safety
Rentals
FS1104HD 4'
FS1106HD 6'
FS1108HD 8'
FS1110HD 10'
FS1112HD 12'
524
Step
Size
Bottom
Width
Approx Approx
Spread Wt. (lbs.)
3"
3"
3"
3"
3"
20 9⁄16"
24 1⁄16"
27 9⁄16"
31 1⁄16"
34 9⁄16"
28"
40 13⁄16"
52 5⁄8"
64 7⁄16"
76 1⁄4"
Hartford, CT
800-969-0285
19
27
36
45
56
21
24
27
32
36
55
68
84
100
Heavy Duty 300 lb. Load Capacity Type 1A
Heavy Duty 375 lb. Load
Capacity - Type 1AA
Size
37 1⁄2"
44 7⁄8"
52 5⁄16"
59 3⁄4"
67 1⁄8"
81 15⁄16"
96 3⁄4"
111 1⁄2"
126 5⁄16"
FT1000 Series Fiberglass
Tripod Step Ladder
FS1100HD Series
Fiberglass Step Ladder
Part
No.
19 5⁄16"
21 1⁄16"
22 9⁄16"
24 1⁄16"
25 9⁄16"
28 9⁄16"
31 9⁄16"
34 9⁄16"
37 9⁄16"
Approx Approx
Spread Wt. (lbs.)
Part
No.
Size
Step
Size
Bottom
Width
Approx Approx
Spread Wt. (lbs.)
FS1004
FS1005
FS1006
FS1007
FS1008
FS1010
FS1012
4'
4'
6'
4'
8'
10'
12'
3"
3"
3"
3"
3"
3"
3"
32 ½"
34"
35 ½"
40 11⁄16"
42 3⁄16"
52 ¼"
55¼"
29"
35"
41"
48"
54"
66"
78"
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
17
20
24
27
31
44
53
Philadelphia, PA
610-647-8070
Fiberglass Extension Ladders
Heavy Duty 300 lb. Load Capacity Type 1A
Our best extra heavy duty channel extension ladder for all industrial needs.
The extra heavy duty, channel extension
ladder for lighter industrial use.
Full channel non-conductive side rails.
Equipped with top quality features for lasting service.
Full channel non-conductive side rails.
Designed for 300 lb. workload when set at the
proper working angle.
Designed for a 300 lb workload when set at
the proper working angle.
Two section extension ladders
20'
24'
28'
32'
10'
12'
14'
16'
Max. Ext Approx
Height Wt. (lbs.)
17'
21'
25'
29'
42
52
58
70
*Does not include rope & pulley
Scaffold Tags
Provide a means of communicating whether a
scaffold is safe and ready for use.
• Card stock or unrippable
vinyl material
• 6”x 3”
Louisville Scaffolds can be
found on the next page!
FE3220
FE3224
FE3228
FE3232
FE3236*
FE3240*
20'
24'
28'
32'
36'
40'
10'
12'
14'
16'
18'
20'
Max. Ext Approx
Height Wt. (lbs.)
17'
21'
25'
29'
32'
35'
42
52
58
70
79
93
FE8800 Series Fiberglass
Manhole Ladder
Heavy Duty 300 lb. Load Capacity Type 1A
• Utility style safety shoes
• Round rungs
• Narrow design
• Rail protectors
• Full channel fiberglass rail
• All ladders feature 3-1/4" rail depth; Outside
width: 14"; Inside width: 11-5/8"
FE8808
FE8810
FE8812
FE8816
FE8818
FE8820
Washington D.C.
877-419-2755
Section
Length
*Type 1 250 lb. rated
Part
No.
Philadelphia, PA
610-647-8070
Total
Length
Abrasives
Section
Length
Part
No.
14 11⁄16" 13 11⁄16" 17 1⁄16" 16 1⁄16"
15 5⁄16" 14 5⁄16" 17 11⁄16" 16 11⁄16"
Boston , MA
800-645-6155
Total
Length
Approx
Wt. (lbs.)
8'
10'
12'
16'
18'
20'
19
23
25
36
51
45
Hartford, CT
800-969-0285
OnSite
Supply
Total
Length
FE7216*
FE7220
FE7224
FE7240
14 11⁄16" 13 11⁄16" 17 1⁄16" 16 1⁄16"
15 5⁄16" 14 5⁄16" 17 11⁄16" 16 11⁄16"
5 3⁄4"
6 1⁄8"
Safety
Part
No.
5 3⁄4"
6 1⁄8"
16'-28' 3 1⁄4"
32'-40' 3 15⁄16"
525
Rentals
16'-28' 3 1⁄4"
32'-40' 3 15⁄16"
Inside Width Outside Width
Base Fly
Base
Fly
Inside Width Outside Width
Base Fly
Base
Fly
Tools
Rail Stack
Sizes Depth Ht.
Specifications
Pipe
Hangers
Specifications
Two section extension ladders
Rail Stack
Sizes Depth Ht.
• D-shaped rungs
• Swivel safety shoes
• Outside slide guides
• Mar-resistant rail end caps
• Quicklatch™
Threaded
Rod
• Full Metal Boot™
• D-shaped rungs
• Swivel safety shoes
• Outside slide guides
• Mar-resistant rail end caps
• Aluminum plate coonection rungs
• Quicklatch™
Strut
Heavy Duty 300 lb. Load Capacity Type 1A
Anchors
FE3200 Series Fiberglass
FE7000 Series Fiberglass
Plate Connect Extension Ladder Channel Extension Ladder
Fasteners
LADDERS
Fasteners
Scaffolds / LADDER Accessories
Anchors
Fortruss® Steel Rolling
Tower Scaffolds SS Series
Scaffolds
End Frames:
• Full height unit 29” wide x 68” high (without casters)
• Half unit 29” wide x 39” high (without casters)
Strut
Width (assembled):
SS0606
• 29-1/2” with casters 66-3/4” with outriggers and casters
Platform:
• Exterior grade, edge protected 5/8” thick plywood
• 6’unit - 29” wide x 65-3/8” long
• 8’ unit - 29” wide x 89 3/8” long
SS1506
Threaded
Rod
Guardrail and Toeboard Kit
Platform height (max.): with casters
(Meets OSHA requirements)
Two assemblies are easily installed and removed. 4-3/4” high steel
toeboard is standard and welded in place. Gates swing inward, latch
with gravity-operated latches.
• 6’ unit - 6’ 3”
• 12’ unit - 11’ 8”
• 15’ unit - 14’ 10”
OSHA requires guardrail, toeboard and outriggers when the platform is more
than 10’ above the floor surface.
Load capacity:
Base Plate (set of 4)
Pipe
Hangers
• 6’ long unit - 655 lb (50 lb/sq. ft)
• 8’ long unit - 450 lb (25 lb/sq. ft)
Tools
Model
Size
(H x L)
End
Frames
SS0306*
SS0308*
SS0606
SS0608
SS1206
SS1208
SS1506
SS1508
3’ x 6’
3’ x 8’
6’ x 6’
6’ x 8’
12’ x 6’
12’ x 8’
15’ x 6’
15’ x 8’
(2)
(2)
(2)
(2)
(4)
(4)
(4)
(4)
* Without casters
For fixed set-up and grading applications.
Truss
Assem.
Plywood
Platform
Outrigger
Casters
Guardrail
Kit
3’
(2) 6’
(1) 6’
-
-
3’
(2) 8’
(1) 8’
-
-
6’
(2) 6’
(1) 6’
(4)
-
6’
(2) 8’
(1) 8’
(4)
-
6’
(4) 6’
(2) 6’
(8)
(1)
8’
(4) 8’
(2) 8’
(8)
(1)
6’ (2) 3’
(6) 6’
(3) 6’
(8)
(1)
6’ (2) 3’
(6) 8’
(3) 8’
(8)
(1)
Do not stack higher than 3 units totaling 15’.
Each set of end frames requires one pair of trusses and platform.
Toeboard Kit
Weight
-
-
-
-
(1)
(1)
(1)
(1)
112
127
154
171
418
463
530
590
Abrasives
Ladder Accessories
Ladder Leveler
OnSite
Supply
Ladder Jacks
Safety
Holds stages and planks up to 20"
wide. 6 pitch adjustments and folds
for easy stoarge. Short body spans 2
rungs/Log body spans 3 rungs. Requires (2) Jacks. Part No. Description
Part No.
Description
LP-2100-23 Short Body Ladder Jack
LP-2100-13 Long Body Ladder Jack
Rentals
526
Ladder Stabilizers
Holds stages and
planks up to 20"
wide. 6 pitch
adjustments and
folds for easy
stoarge. Short
body spans 2
rungs/Log body
spans 3 rungs. Requires (2) Jacks. Part No. Description
Part No.
Description
LP-2100-23 Short Body Ladder Jack
Hartford, CT
800-969-0285
Fits extension & single ladders with rail
to 4" x 1¾". Holds
ladder 12" from wall
and spans 48". Adjustable model holds
ladder 13" to 25"
from wall. Attaches
with 2 U-bolts and
feature replaceable
rubber tips.
Part No.
Description
LP-2200-00 Ladder Stabilzer
LP-2210-00 Adjustable Stabilizer
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
U-Ground
NEMA 5-15
U-Ground
NEMA 5-15
Outdoor Extension Cords
3-Conductor SJT W-A Grounding 300 V
Year-round, all-weather extra flexible cord.
Ideal for garden and outdoor tools - meets UL and OSHA
standards for outdoor cords.
Year-round, all-weather extra flexible cord.
Ideal for garden and outdoor tools - meets UL and OSHA
standards for outdoor cords. Lighted end indicates power status.
Part No.
Length
AWG
Watts
Amps
Part No.
Extra Heavy Capacity - 300V
Length
AWG
Watts
Amps
Threaded
Rod
3-Outlet Power Block Extension Cords
3-Conductor SJT W-A Grounding 300 V
Heavy Capacity - 300V
05-00123
25'
12/3
1875
15
05-33041
25'
14/3
1875
15
05-00124
50'
12/3
1875
15
05-33042
50'
14/3
1875
15
05-00125
100'
12/3
1875
15
05-00343
100'
14/3
1625
13
Strut
Anchors
Outdoor Extension Cords
Fasteners
Extension Cords
GFCI Adapters
05-00347
25'
12/3
1875
15
05-00348
50'
12/3
1875
15
05-00349
100'
12/3
1875
15
Pipe
Hangers
Extra Heavy Capacity - 300V
Remains flexible in extreme hot or cold weather conditions.Can
be used in temperatures as low as -58° F or as high as 221°
F. Cords also resist the negative effects of oil, water, weather,
abrasion, and ozone. Meets OSHA and UL standards
Part No.
Length
AWG
Watts
Amps
Tools
Cold Weather Extension Cords
3-Conductor SJTOO W-A Grounding 300 V
05-00141
04-00105
04-00103
Adapters
3-Conductor SJT W-A Grounding 300 V
25'
12/3
1875
15
05-00142
50'
12/3
1875
15
05-00143
100'
12/3
1875
15
Part No.
Length
Outlets
AWG
Watts
Amps
GFCI
1875
15
NO
Metal Shade Work Light with Outlet in Handle
12/3
1875
15
YES
Incandescent work lights are ideal for workshop and garage
environments. Heavy-duty metal shade with hanging hooks for
flexibility. Work lights come with 25' or 50' feet of SJT wire and
accept 75 watt bulbs. Additional outlets included in handle.
12/3
1875
15
YES
Triple Tap Power Block - (No GFCI)
04-00090
2'
3
12/3
Triple Tap Power Block - (with GFCI)
04-00105
3'
3
In-line GFCI with 1 Outlet
04-00103
3'
1
U-Ground
NEMA 5-15
Locking In-Line GFCI with 1 Outlet
04-00104
3'
Philadelphia, PA
610-647-8070
1
OnSite
Supply
Adaptors for the Professional trade includes
U-Ground
3-outlet power block, u-ground to locking
NEMA 5-15
and vise versa conversion adapters. "Y", "W",
R.V., and GFCI adapters are also available in 15 and 20 amp
configurations. All of these products are designed to maximize
flexibility and are compatible with a variety of portable tools.
12/3
2500
Washington D.C.
877-419-2755
20
YES
Boston , MA
800-645-6155
Part No.
Length
AWG
Bulb
Outlets
08-00184
25'
16/3
75W
1
08-00185
50'
16/3
75W
1
Hartford, CT
800-969-0285
527
Safety
04-00104
Rentals
04-00090
Abrasives
Extra Heavy Capacity - 300V
Fasteners
Portable Lighting
Portable Quartz Utility Light
500W Economical Lighting
Anchors
•• Tubular steel frame with metal guard
•• Fully weatherproof and UL Listed for use
in wet locations
•• One quartz halogen bulb included with
each fixture
Part No.
Description
WL400MH 400 WATT
Metal Halide Wobblelight
• 40000 lumens = to 31 - 100W Bulbs, 3.6
AMPS (110V)
• Fan Cooled, Available Color: Yellow
• 28 lbs., 36" Tall, 18" Wide
Weight
Strut
5125I
Utility Light, 500W
5 lbs.
5165I
Clamp-On Utility Light, 150W
3 lbs.
WL200MH 250 WATT
Metal Halide Wobblelight
• 20000 lumens = to 16 - 100W Bulbs,
2.25 AMPS, (110V)
• Fan Cooled, Available Color: Yellow
• 27 lbs., 36" Tall, 18" Wide
Portable Quartz Floodlights
6 foot or 7 foot Tripod Lights
Threaded
Rod
Pipe
Hangers
•• 1000W ( 2 - 500W Heads)
•• Folding tripod base and removable
head assemblies for easy set-up and
storage
•• Cord retainer mounted on the base to
prevent tip over
•• Adjusts from 4’ to 6'/7’
•• 8’ 16/3 SJTW power supply cord
•• All steel stand.
Part No.
Description
WL500M 500 WATT
Halogen Wobblelight
• 8000 lumens = to 7 - 100W Bulbs,
3.6 AMPS, (110V)
• Fan Cooled, Available Color: Yellow
• 25 lbs., 36" Tall, 18" Wide
Weight
5610i
6' Economy Floodlight - 3 Stage Mast
17 lbs.
5710
7' Commercial Floodlight - 2 Stage Mast
25 lbs.
Tools
Metal Halide Cart Lights
Single and Dual Head
Abrasives
OnSite
Supply
Safety
•• Features 1000W single
or dual head fixture(s).
(110,000 lumens /
220,000 lumens)
•• All frames are made of
1-1/4" 12 gauge square
steel tube and are
powder coated safety
yellow
•• Head assemblies are
easily removed from
the mast and detach
from their ballast. This
enables one person setup and offers safety
5309C
5322
and convenience in
transporting storage
•• All units have steel generator platforms and can be plugged
directly into any standard 15 amp receptacle
•• Model 5309C has a manually operated steel telescoping
mast with a portable, detachable ballast.
•• Model 5322 has a steel telescoping mast which is raised and
lowered by a self-braking winch and fixed ballast
•• Each mast lays down or removes for easy transporting
Part No.
Description
5309C
5322
Rentals
528
Plastic Cage String Lights
••
••
••
••
50' (5 Lights) and 100' (10 Lights) strings.
150W Bulb (not included)
12/3 SJTW power supply cord
Plastic bulb guard
Part No.
Description
08-00193
50' Plastic Cage String Light - 5 Lights
13.89 lbs.
08-00194
100' Plastic Cage String Light - 10 Lights
25.35 lbs.
Weight
Portable Halogen Bay Lite
•• Pulse Start models comply to EISA Act
2007 for energy efficiency
•• Meets NEC 2005 & 2008 requirements
•• UL Listed, suitable for damp locations
•• 400 W, High light output & long lamp life
(Avg. <10,000 hrs.) provide cost effective
& low maintenance operation
•• Heavy-duty formed steel enclosure with
yellow powder-coated finish
•• Open-air ballast for cooler operation
•• Models available with secondary "daisy
chain" output cords in 1, 25 and 50 ft
secondary (female) - connect up to 6 lamps
together from a single 20 amp source!
•• Clear metal halide pulse start lamp included
•• Hook with locking feature - fixture mounts
in seconds, no tools required
•• (2) 3/4" knock-outs for optional conduit access
Single Fixture Cart Light - 5 ft. - 10' ht.
102 lbs.
Part No.
Dual Fixture Cart Light -5.5' - 12' ht.
196 lbs.
MHX-1004
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Weight
Description
400W Bay Lite
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part No.
IN2-K
IN2-KML
Description
2-"D" Cell
2-"D" Cell
with magnet
LED Worklight
49-24-0146
2735-20
• 90-degree pivoting aluminum head –
Impact and weather
resistant
• LED lights provide
2X brighter light and
runs twice as long as
incandescent bulbs
49-24-0171
18V Li-Ion
Worklights
Lights do not include M12™
battery or charger
• Ergonomic, compact, and
lightweight design
• Fold-away utility hook
• 135 degree rotating head
Part No.
Part No.
Description
49-24-0145 Cordless Xenon
Worklight
49-24-0146 Cordless LED
Worklight
Description
"No-Roll" Economy
Flashlights
Black PLastic body with
hexagon shaped head
prevents rolling. 2-"D" cell (not
included).
Part No.
PCECON-B
Description
2-"D" Cell
Economy
Flashlight
2735-20
M18 LED
Worklight
49-24-0171 M18 Worklight
Part No.
8ER-0046
Description
18V Pivoting
Head Flashlight
18V Fluorescent
Area Light
• Wide angle
beam
• Head rotates
90°
• Lightweight,
compact
design
• Battery/
Charger not
included
Part No.
DW908
DC509
DC519
• Built-in hook
allows hanging.
• Over-molded lens
• 13W fluorescent
bulb
• Lightweight, compact design
• Battery/Charger
not included
Description
18V Flashlight
Part No.
DC515
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Description
DC919
36V, 28V & 18V
Floodlights
• Flex neck design with lockable head clips.
• Wide angle beam of light.
• 8 hours run-time on a single
charge.
Battery/Charger not included
Part No.
DC509
DC519
DW919
18V Fluorescent
Area Light
Boston , MA
800-645-6155
Description
36V Floodlight
28V Floodlight
18V Floodlight
8ER-0047
2-Cell D, 10" L
8ER-0048
3-Cell C, 10-3./4" L
8ER-0049
3-Cell D, 12-1/4" L
8ER-0050
4-Cell C, 12-3/4" L
8ER-0051
4-Cell D, 14-3/4" L
8ER-0052
5-Cell C, 14-3/4" L
8ER-0053
5-Cell D, 17" L
8ER-0055
6-Cell D, 19-1/4" L
Worklight/Charger w/GFCI Protection
• Cordless/corded 38W fluorescent worklight runs on
12-18V DeWalt batteries or
AC power to provide area
lighting.
• 1 hour dual port battery
charger charges (2) DeWalt
7.2-18V batteries (NiCad).
• (3) GFCI protected power
outlets.
• Spring loaded battery hold
down keeps batteries secure.
• Quick and easy fold-up, transport and storage.
Part No.
Description
DC022
Worklight/DualPort Charger
Hartford, CT
800-969-0285
Fasteners
2-Cell C, 9" L
DeWalt and Milwaukee Cordless Lights DO NOT
include battery or charger. Please our Cordless
Tool Section for complete listing
Lighting
Anchors
Cam-driven beam changes from
spot to flood for a perfectly
focused beam. Features selfcleaning switch eliminating
oxidation, for extremely
reliable operation. Includes
spare Krypton lamp in tail cap.
O-rings at each opening ensure
resistance to water and shock.
Aluminum construction with
black anodized finish. Choose
from 4-Cell D, 3-Cell D, 2-Cell
D, 2‑Cell C, 3-Cell C, 4-Cell C,
4-Cell D, 5-Cell C, 5-Cell D or
6-Cell D units. All are black
and feature a knurled surface
for a secure grip.
529
Pipe
Hangers
• Xenon incandescent bulb
Rugged yellow plastic housing.
Bright Krypton bulb. With or
without magnet. 2-"D" cell (not
included).
Tools
49-24-0185 V28 Li-Ion
Work Light
Flashlights
Abrasives
Worklight
49-24-0145
Part No.
Description
Industrial Flashlights
OnSite
Supply
Hands-free light in a compact
and lightweight package. Both
lights feature a 90° rotating
head. Integrated magnet provides hands-free use.
Safety
• Clip-Lok
system ready.
• 140° pivoting head.
™
Rentals
12V Li-Ion
Worklights
Worklight
Strut
Lighting
Threaded
Rod
Flashlights
Fasteners
Batteries / Bulbs / Cold weather
Cold Weather Supplies
Procell Batteries
®
Anchors
Strut
This high-performance
alkaline battery line is
dedicated to industrial
applications. Dependable,
long lasting even after four
years in storage. Operates
reliably in temperature
extremes of 20° F to 160°
F. Lasts up to seven times
longer than regular zinc carbon batteries. Date-coded to ensure
freshness. Distinctive industrial label reduces pilferage.
Description
Part No.
Cold Weather Extension Cords
3-Conductor SJTOO W-A Grounding
300 V
Remains flexible in extreme hot or cold weather
conditions.Can be used in temperatures as
low as -58° F or as high as 221° F. Cords also
resist the negative effects of oil, water, weather,
abrasion, and ozone. Meets OSHA and UL
standards
Part No.
Length
AWG
Watts
Amps
Extra Heavy Capacity - 300V
Threaded
Rod
8BR-0010
AAA Cell Alkaline
05-00141
25'
12/3
1875
15
8BR-0008
AA Cell Alkaline
05-00142
50'
12/3
1875
15
05-00143
100'
12/3
1875
15
8BR-0007
C Cell Alkaline
8BR-0006
D Cell Alkaline
8BR-0009
9 Volt Alkaline
8BR-0012
6 Volt Alkaline, Spring Terminal
8BR-0013
6 Volt Alkaline, Screw Terminal
Calcium Chloride Ice Melt
Stop Slips and Falls Before They Happen
•• Generates heat on contact.
•• Effective in temperatures down to -25° F.
•• No powdery white residue.
•• Safer for plantings and concrete.
•• 50 lb. bags.
•• To Order: P/N QIK-JOE
Pipe
Hangers
Replacement Bulbs
Incandescent Light Bulbs
Part No.
Description
5902FR
75W Rough Service Light Bulb
5903FR
100W Rough service Light Bulb
Tools
Quartz Halogen Light Bulbs
Part No.
Description
5911
150W Replacement Bulb
5905
500W Replacement Bulb
Abrasives
Metal Halide Light Bulbs
Part No.
Description
5910C
1000W Conical Bulb
Tillman Polar Fleece Gloves
Polar fleece warmth…leather palm protection
• Soft, comfortable and warm polar fleece
back with ColdBlock™ lining
• Two palm materials available - Top grain
pigskin, Cowhide split
See Our Safety Section for more
Glove Options!
Master TC200V Propane
Convection Heater
• 100 - 200,000 BTU
• Requires 100 lb fuel tank
Part No. - TC200V
OnSite
Supply
Concrete Curing Blankets
Combination Radiant & Fan
Forced Heater
Safety
• 2.8 effective R-value
• 6’ x 25’ rolls
• Aluminum coated cover
• 2 layers of bubble
• R-value tests conform to ASTM C-518
and/or ASTM C-236
• 3 Settings – 600W Radiant, 900W Fan
Forced, 1500W Radiant & Fan Forced.
• Temperature controlled thermostat.
• Dual Safety – Tip Over Switch &
Manual Reset Type Limit Control.
Part No. - RVALUE2.8
Part No. - 198TMC
Rentals
530
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Temporary Power Cord
Part No.: 6400M
Length: 100
Gauge: 6/3 - 8/1
Type: S
Jacket: Rubber
Pack: 1
Weight: 63
* Weather Resistant Boots are available on request.
Mini Series Portable
Power Centers perform
the same functions as
standard systems. These
compact units break
down 125/250V power
into two (2), usable,
20A 125V circuits. As
in the “G” series box,
each circuit has its own
breaker, pilot light, and
GFCI protection module.
Used in conjunction with
10 gauge, 4 wire power
cords, these small power
centers provide a very cost effect means of distributing power
throughout a jobsite. Mini Centers are easily adapted to existing
temporary power centers, generator sets, or used independently
any place 125/250V power is available.
Part No.
6502GU
Description
Weight
20A Mini Portable Power Center
15 lbs.
Fasteners
Anchors
Mini Portable Power Center
Strut
Temporary Power Distribution Centers
Temporary Power Accessories
Threaded
Rod
Temporary Power Distribution Centers
“G” Series GFCI Protected
CEP’s “G” series Portable Power Distribution Centers have been engineered utilizing the latest in GFCI technology, providing the user
with a new level of electrical safety. These power distribution centers are UL listed for outdoor use and designed to stand up to the
toughest of jobsite conditions. Each unit has been carefully assembled to provide the ultimate in electrical safety as well as meeting
current OSHA standards.
Pipe
Hangers
Temporary Power Distribution Centers
Each box has one Non GFCI
30A 250V twist lock receptacle
Secondary
Surge Arrestor
Pilot light indicates
power is on and
proper circuit
integrity
Legs are 10 gauge
steel, bolted on for easy
replacement
Part
No.
GFCI module has MOV to help protect against
damage caused by transient voltage surges
Rating
Power Power
Inlet
Outlet
6506GU* UL Listed - 50 Amp 125/250 volt
Receptacles
Qty. Type
CS6375 CS6369 6
5-20R
Provides open neutral and open
ground protection as well as
GFCI
Overload
GFCI
Protected Weight
Yes
Yes
29
OnSite
Supply
Models available with either
4 or 6 20A/125 receptacles
Abrasives
Each 125V receptacle is
individually protected with
a special GFCI module
Tools
50A 125/250V
Inlet and Outlet
Use of Temporary Power Distribution Centers in conjunction with generators reduces the life expectancy of the MOV due to irregular
voltages and surges.
Specifications
Input current: 50 amp 1 phase 125/250 volt A.C. 3 ply 4 wire. Trip level: 4 - 6 milliamps. Trip time: Less than .025 seconds nominal.
Dimensions: W = 14.5” L = 21” H = 11”. Chassis: 16 gauge steel. Top: 14 gauge steel. Legs: 10 gauge steel. Finish: 3 mil UL listed
polyester powder coat.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
531
Rentals
Caution:
Safety
*U designates straight blade 20A 125V receptacles
Fasteners
Storage Boxes
Storage Boxes
Anchors
Strut
Mobile Storage Boxes
•
•
•
•
4872R
with ramp
Threaded
Rod
4872 / 4872R Flat Top Mobile Storage Boxes
•
•
•
•
•
•
Pipe
Hangers
•
•
•
•
•
•
Tools
Weather resistant design
Side-wall storage.
16 ga. steel construction; (3) 12 ga. steel support skids.
Hinged lower shelf allows for easy storage of larger objects.
Zero lock component assembly required.
Recessed and concealed lock protector inhibits forced entry
and lock corrosion.
Angled handle recess prevents pinch points.
Hemmed (reinforced) high strength shelves.
Continuous non-removable hinge pins to prevent theft.
Load ramp allows easy storage of larger heavier items
(4872R only).
Overlapped welded corners instead of butt welding for
greater strength.
Strategically located, easily accessible, durable gas-shocks
provide for easier opening lid.
Easy mobility for job-site or shop use
Built-in pre-tapped skids for easy caster installation
Large fold-down recessed handles for convenient lifting
Dual recessed and concealed lock protector for maximum
security against drilling and cutting lock
• Heavy-duty piano hinges with non-removable pin
• Steel support arms to hold lid in upright position
• Convenient storage tray on back wall for small items
(Models 2448, 2460 and 3068 only)
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
1332
1636
2142
2448
2490
3048
4.9
6.7
9.7
16
20
25
14
17
20
24
24
30
32
36
42
48
60
48
19
19
20
24
24
30
83
99
113
146
182
183
Flat Top Boxes
• Flat-top design provides more
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
•
4872
60
48
72
30
360
•
4872R
60
48
72
30
375
•
Abrasives
•
•
•
OnSite
Supply
Small Storage Boxes
• Protects small tools and supplies; single lock hasp for use
with padlock
• Compact side handles for easy portability
• Heavy-duty hinges and chain connector to hold lid in upright
storage capacity for tall,
bulky items, plus a large work
surface for job-site plans
Gas springs allow easy
opening and closing
Double-hinged cover folds
up and locks out of the way
Dual recessed and concealed
lock protectors provide
maximum security against
drilling and cutting locks
Features two reinforced
steel shelves with large lip to prevent items from rolling off
Channel reinforcements on lid lock side panels into lid for
added security when closed
Large fold-down recessed handles for convenient lifting
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3360
34.5
33
60
30
256
4848
49
48
48
30
292
4860
50
48
60
30
305
Accessories - Casters
Safety
position
• Welders box (1230) has cut out for hoses
Rentals
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
1230
3.3
12
30
16
48
1531
4.5
15
31
18
51
532
Hartford, CT
800-969-0285
Part
No.
666
695
694
53904
Boston , MA
800-645-6155
Wheel Thread
Cap./
Weight
Dia.
Length Wheel
(lbs.)
Desc.
2 Ridgid, 2 Swivel
4"
2"
400 lbs
13
2 Ridgid, 2 Swivel
4"
2"
375 lbs
10
4 Swivel
4"
2"
400 lbs
13
Gas Springs for 3360, 4848, & 4860 Storage Boxes
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Storage Boxes
Anchors
Field Office
Fasteners
Storage Boxes
• Separate storage for tools
and blueprints
• Built-in key lock for top
section
• Buttom section has lock
protector
•
•
•
•
Large capacity storage with traditional slant-top design
Gas springs allow easy opening and closing
Double-hinged cover folds up and out the way
Dual recessed and concealed lock protectors provide
maximum security against drilling and cutting locks
• Features two reinforced steel shelves with large lip to prevent
items from rolling off (Model 2260, one shelf only)
• Large fold-down recessed handles
• Add optional casters for easy mobility
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
2260
3648
3660
32
34
44
36
48
48
60
48
60
32
30
30
228
273
282
Accessories - Casters
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
8060
116.5
80
60
42
626
Accessories - Casters
Part
No.
603
503
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5760
59.3
57
60
30
437
603
503
on 3 sides
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Abrasives
Accessories - Casters
• 1/2” conduit support
tunnels for top storage
(conduit not included)
• Sturdy handle for mobility
• Compartments on doors
for small tools and parts
storage
Platform for shovels, picks,
brooms and other long handle
tools
Tools
• Secure storage with easy access
• Optional casters available
Part
No.
• Flush mounted doors
• Concealed lock
protector
• Large capacity storage
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5060MESH
36.8
54
28
57
401
Accessories - Casters
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Washington D.C.
877-419-2755
•
•
•
•
box that’s also a
workbench
Tough composition
board work surface on
top with built-in chain vise and telescoping wrench stop
Two swivel casters and two rigid casters for easy mobility
Four reinforced steel shelves with large lip to prevent items
from rolling off
Large fold-down recessed handles for convenient lifting
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3548
23
30
48
24
257
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
533
OnSite
Supply
Mobile Workbench
Part No.
Philadelphia, PA
610-647-8070
Cap./
Wheel
• Flush mounted doors
• Concealed lock protector provides
• High visibility mesh screen
403
603
Thread
Length
maximum security
Cap./
Weight
Wheel Thread
Dia.
Length Wheel
(lbs.)
Desc.
2 Ridgid, 2 Swivel
4"
2"
400 lbs
13
10
4"
2"
375 lbs
2 Ridgid, 2 Swivel
4 Swivel
4"
2"
400 lbs
13
Gas Springs for 2260 Storage Boxes
Gas Springs for 3648, & 3660 Storage Boxes
Desc.
4 Swivel
2 Ridgid, 2 Swivel
Wheel
Dia.
4-Door Cabinet
2 Front, 2 Rear)
Mesh Job Box
Part
No.
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Safety
666
695
694
53950
53951
Height
(Inch)
Rentals
Part
No.
Capacity
(cu. ft.)
Pipe
Hangers
Part
No.
Part
No.
Threaded
Rod
Slant Top Boxes
Strut
• Optional casters available
Fasteners
Storage Boxes
Double-Door Utility
Cabinet
Storage Boxes
• Complete workshop for
Anchors
2-Door Cabinet
•
• Flush mounted doors
• Concealed lock protector
•
provides maximum security
• Large fold-down recessed
Strut
handles for convenient
lifting
• Secure storage with easy
access
• Optional casters available
•
•
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3448
22.5
34
48
24
201
•
•
Threaded
Rod
Accessories - Casters
Part
No.
603
503
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
storing supplies and tools
close to work area
Double doors swing wide for
full access to interior
Shelves feature
large front lip to
keep small items from rolling
off
Top features full-length rain
gutter for weather protection
Sturdy lifting eyes for transporting from floor to floor on
construction sites
Large fold-down recessed handles
Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3448
22.5
34
48
24
201
Accessories - Casters
Part
No.
603
503
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Pipe
Hangers
Tools
Bi-Fold Utility Cabinet
• Maximum storage capacity with minimum floor space
Abrasives
Double-Door Utility Cabinet With Lock Protector
requirements
• Four individual 15” D x 14-1/2” H x 60” W storage
compartments on each side
• Reinforced steel shelves welded in place for added strength
and durability
• All shelves feature large front lip to keep small items from
rolling off
• Each Bi-fold section is mounted on four casters for easy
OnSite
Supply
opening and closing
• Sturdy lifting eyes for transporting from floor to floor on
construction sites
• Large fold-down recessed handles
•
6 Swivel and 2 Ridgid, 4” casters included
•
•
•
•
•
Flush mounted doors
Concealed lock protector provides maximum security
Large fold-down recessed handles
Secure storage with easy access
Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5660L
46
56
60
24
401
Accessories - Casters
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
Part
No.
5860
60.4
58
60
30
548
603
503
Safety
Accessories - Casters
Part
No.
603
503
Rentals
534
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Desc.
2 Ridgid, 2 Swivel
4 Swivel
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
6"
6"
2"
2"
500 lbs
500 lbs
22
20
Heavy-Duty Casters
Set incl. a pair of fixed & a pair of swiveling casters
Model Size
Shipping Wt.
601040 4"
15.0
602040 6"
19.0
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Storage Boxes
Piano Lid Boxes
Fasteners
Storage Boxes
feature reinforced door for easy
loading and unloading of heavy
equipment. Available in 60˝ and 74˝
length models.
Anchors
Heavy-Duty Chests
DROP-FRONT PIANO BOXES
Size Guide
L
Full-length stainless steel
hinge resists corrosion
Strut
W
H
HIGH-CAPACITY PIANO BOX
features 75% more capacity than the
popular model 1-685990. Nearly 5´
tall sidewalls organize more tools
and equipment on the job site.
Three 500 lb. Capacity; full width
rear shelves
Part No.
Description
Ln.
W.
Height
Cu.
Ft.
Wt.
(lbs)
1-652990
36" L Chest
36"
20"
23-3/4"
8.3
98
1-653990
42" L Chest
42"
20"
23-3/4"
9.3
118
1-654990
48" L Chest
48"
24"
27-3/4"
15.4
148
1-655990
60" L Chest
60"
24"
27-3/4"
19.3
182
1-656990
48" L Chest
48"
30"
33-3/8"
24.3
190
1-568990
72" L Chest
72"
24"
27-3/4"
23.2
220
Cu.
Ft.
Wt
(lbs)
47.5
379
63.7
523
47.5
366
58.7
436
Pipe
Hangers
Efficient tapered ramp design
makes it easy to roll heavy objects
into storage
Utiltiy Bin Cabinets
Six Built-In sidewall storage bins
Threaded
Rod
Pad-lockable drop down door
prevents access to heavy tools and
equipment while the piano box is
open
Punched Holes for hanging safety
harnesses
Desc
Ln.
W.
Height
Cu.
Ft.
Wt.
(lbs)
1-681990
Piano Lid
48"
31"
50"
38
286
1-682990
Piano Lid
60"
31"
50"
47.5
326
1-688990
Piano Lid
60"
31"
38"
34.5
283
1-689990
Piano Lid
74"
31"
50"
56.5
423
Size Guide
HIGH CAPACITY PIANO LID BOX
74.5"
35.5"
60-1/4"
85.7
500
30"
50"
47.5
405
E
DROP FRONT PIANO LID BOX
Piano Lid
60"
D
A
OnSite
Supply
1-683990
C
Field Office
Available on
Request
See Size Guide for Dimensions
Call for
Information
Height
Cu.
Ft.
Wt.
(lbs)
1-674990
Field Office
63"
42"
80"
104
660
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
695990
4
697990
2
698990
4
Boston , MA
800-645-6155
D
E
24-1/4"
32-1/4"
24-1/4"
32-1/4"
Hartford, CT
800-969-0285
25-3/4"
W.
C
53-1/4"
Ln.
2
B
60-1/8"
Description
694990
A
60-3/4"
Part No.
Part No.
# of
Doors
535
Safety
Piano Lid
B
Rentals
1-685990
Abrasives
Part No.
Tools
Tilt-N-Stow™ bottom shelf for easier
access to base
Fasteners
Storage Boxes
Anchors
THE NEW LINE OF HEAVY-DUTY JOBSITE STORAGE BOXES FROM DEWALT®
FULLY LOADED
Features:
Strut
• With our GearGuard™ MultiPoint Locking System, your gear
stays safe.
• Ergonomic Handles are designed
for easy gripping.
• Optional Shackleless
Padlock from American
Lock is the most secure
lock available.
• Skyhooks allow quick
and safe lifting of the
storage box.
Product
Catalog Number
• Electrical Access Port allows you to recharge your
batteries while your tools
are securely locked inside.
• Continuous Hinge with
Non-Removable Pin provides added security.
Description
• Fold-Up Shelf is great for
accommodating storage
of larger items.
Width
Length
Height
Weight
Threaded
Rod
Pipe
Hangers
Tools
Storage Chest
19"
32"
15"
90 lbs.
DWJB2448
Storage Chest
24"
48"
26"
164 lbs.
DWJB2460
Storage Chest
24"
60"
26"
190 lbs.
DWJB3048
Storage Chest
30"
48"
31"
213 lbs.
DWJB3660
SLANT-TOP
Storage BOX
30"
60"
48"
333 lbs.
DWJB4860
FLAT-TOP
Storage BOX
30"
60"
48"
354 lbs.
24"
60"
56"
425 lbs.
Abrasives
DWJB1332
OnSite
Supply
Safety
DWJB5660L
Rentals
536
Hartford, CT
800-969-0285
Storage
CABINET
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Padlocks - Keyed
Laminated Steel Pin
Tumbler Padlocks (4 Pin)
Key
KA - This provides "same key"
convenience and eliminates the
need for multiple keys where
numerous padlocks are used.
All padlocks in the set are keyed
the same.
Weather Tough Padlocks
LF - 1-1/2" Shackle
LH - 1-7/8" Shackle
LJ - 2-1/2" Shackle
Security Hasps
• Hard steel bodies for strength
• Hardened steel staples resist cutting and sawing
• Hardened steel locking eyes for strong cut resistance
• Tamper proof hinges help resist prying
Part No.
Description
2-1/2" Long
3-1/2" Long
4-1/2" Long
6" Long
702D
703D
704D
706D
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
• Hardened boron alloy shackle for superior cut resistance
• Removable cylinder can be replaced or repinned
• Body and cylinder covers protect locks from water, dirt and grime
6127
Keyed Different
5 pin W6000 cylinder
6
24
7/16"
1-3/8"
7/8"
6127LH
Keyed Different; 5 pin
W6000 cylinder;
Long shackle
6
24
7/16"
1-7/8"
7/8"
6127LJ
Keyed Different; 5 pin
W6000 cylinder;
Long shackle
6
24
7/16"
2-3/8"
7/8"
6127KA
Keyed Alike; 5 pin
W6000 cylinder
6
24
7/16"
1-3/8"
7/8"
6127KALH
Keyed Alike; 5 pin
W6000 cylinder;
Long shackle
6
24
7/16"
1-7/8"
7/8"
6127KALJ
Keyed Alike; 5 pin
W6000 cylinder;
Long shackle
6
24
7/16"
2-3/8"
7/8"
6127MK
Master Keyed 5 pin
W6000 cylinder
6
24
7/16"
1-3/8"
7/8"
Part
No.
Description
Boston , MA
800-645-6155
Shackle Dimensions
Shelf Master
B
Pack Carton A
Vertical
Qty. Qty. Dia.
Clearance
Hartford, CT
800-969-0285
Strut
Threaded
Rod
Pipe
Hangers
Tools
A
B
C
5/16" 1"
1"
5/16" 2-1/4" 1"
C
Horizontal
Clearance
537
Abrasives
Part No.
175
175LH
OnSite
Supply
• 2" wide solid brass case and
weatherability
• Hardened steel and brass shackles
• Set-your-own combination
• Resettable to allow for a personalized combination
Shackle
Part
Clerance
No.
Description
(B)
1-3/4" Wide Laminated Steel Body - Shackle Dimensions A: 5/16", C: 3/4"
1KA
Keyed Alike
15/16"
1LJ
Keyed Different
2-1/2"
1KALJ
Keyed Alike
2-1/2"
1-9/16" Wide Laminated Steel Body - Shackle Dimensions A: 9/32", C: 5/8"
3
Keyed Different
3/4"
3KA
Keyed Alike
3/4"
3LH
Keyed Different
1-7/8"
3KALH
Keyed Alike
1-7/8"
3LF
Keyed Different
1-1/2"
3KALF
Keyed Alike
1-1/2"
2" Wide Laminated Steel Body - Shackle Dimensions A: 3/8", C: 15/16"
5KA
Keyed Alike
1"
5
Keyed Different
1"
5LJ
Keyed Different
2-1/2"
5KALJ
Keyed Alike
2-1/2"
1-1/8" Wide Laminated Steel Body - Shackle Dimensions A: 3/16", C: 1/2"
7
Keyed Different
9/16"
7KA
Keyed Alike
9/16"
7LJ
Keyed Different
2-1/2"
7KALJ
Keyed Alike
2-12"
Safety
No. 175 Padlock
#3 and #5 Best Choices
for Storage Boxes
Rentals
• Hardened Steel Shackle
• 4 pin cylinder helps prevent picking
• Dual locking levers provide extra
pry resistance
Fasteners
Masterlock
Fasteners
Tarps / Poly Sheeting
Anchors
Strut
Widely used in:
Poly Sheeting
Construction
Poly Woven Tarps
Threaded
Rod
• Weatherproof
• Water repellent
• Mildew proof
• Flexible
• Washable
• Lightweight
C-410
Pipe
Hangers
Part No.
TARP8X10BLUE
Size
Size
8' X 10'
10 x 100 4 mil
C-412
12 x 100 4 mil
C-420
20 x 100 4 mil
C-610
10 x 100 6 mil
Premium Green
C-611
12 x 100 6 mil
TARP8X10GREEN
C-620
20 x 100 6 mil
TARP10X12BLUE
10' X 12'
TARP10X12GREEN
TARP10X20BLUE
10' x 20'
TARP10X20GREEN
TARP12X16BLUE
12' x 16'
TARP12X16GREEN
Tools
Abrasives
OnSite
Supply
TARP12X20BLUE
12' x 20'
TARP12X20GREEN
TARP16X20BLUE
16' X 20'
TARP16X20GREEN
TARP18X24BLUE
18' x 24'
—
TARP20X20BLUE
20' X 20'
TARP20X20GREEN
TAPR20X25BLUE
20' x 25'
TAPR20X25GREEN
TARP20X30BLUE
20' X 30'
TARP20X30GREEN
TARP30X40BLUE
20' X 40'
TARP30X40GREEN
TARP30X50BLUE
30' x 50'
TARP30X50GREEN
TARP30X60BLUE
30' x 60'
TARP30X60GREEN
TARP40X40BLUE
40' X 40'
TARP40X40GREEN
TARP40X60BLUE
40' X 60'
TARP40X60GREEN
TARP50X100BLUE
50' x 100'
—
100' x 100'
—
TARP100X100BLUE
Clear. Black available. Also available with Woven
Reinforcement and Fire Retardant.
Part No.
Part No.
Blue Economy
• To cover freshly poured concrete
• Protects material and equipment
• Provides dust barriers in demolition
Dust Shield™
Pro Adjustable
Poles
This unique system
makes constructing
temporary walls to control dust
quick and simple! The DUST
SHIELD Pole locks the screening
material firmly against the ceiling.
The Dust Shield poles can be
extended up to 12 feet. Made of
heavy gauge aluminum.
Part No.
Description
DSPRO2
Dust Shield Pro
Zip N Close® Zipper Doorway System
ZIP n CLOSE® can create any size
doorway with poly sheeting or
canvas to control dust, reduce heat
loss or create an instant entrance /
exit to any closed area. For interior
or exterior use. Zip n Close® is
perfect for all types of construction.
Meets federal containment specs
for asbestos removal.
Molded Rubber Straps
• Black rubber with steel "S" hooks
Safety
Part No.
Ln.
BUNG10
10"
BUNG15
15"
BUNG21
21"
BUNG31
31"
ZU01
3" x 7' Peel and Stick Zipper
BUNG41
41"
ZU15
1.5" x 7' Peel and Stick Zipper
Rentals
538
Part No.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Description
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Kraft Paper
Fasteners
FLoor - Surface Protection
Part No.
Size
Part No.
Size
CS24200
24"" x 200'' roll
CS36500
36"" x 500' roll
CS36200
36" x 200' roll
All-purpose protective paper, may be used to cover floors, carpets,
etc. Brown.
Part No.
Size
Part No.
Size
M36
36" x 720'
M48
48" x 300'
Pipe
Hangers
Call for additional sizes
Kraft Wrapping Paper
Threaded
Rod
Ideal temporary carpet protection for remodeling, painting, moving,
model home tours and parties. A clear, 3 mil self-adhering
protective film for all types of carpeting. Non-slip surface that’s
highly resistant to tears and punctures, Carpet Shield removes
cleanly and easily.
Strut
Carpet Shield®
Call for additional sizes
Duct/HVAC Covers
Prevents construction dust and
debris from entering ductwork
system. Ideal protection during
transporting, storing and
construction. Blue, self-adhering
protective film has a high adhesion
suitable for all types of duct work.
Water-based adhesive will not
leave a residue on the metal after
removal. The polyethylene is highly resistant to tears or punctures.
Satisfy SMACNA guidelines during construction by providing
temporary closures on open ductwork.
Size
Part No.
Size
Part No.
400986
24" x 200' x .002
392514
24" x 200 x .003
392516
48" x 200' x .002
392515
36" x 200' x .003
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Part No.
Size
Part No.
Size
WS36300
36" x 300' roll
WS72300
72" x 300 roll
WS48300
48" x 300' roll
WS96300
96" x 300' roll
WS60300
60" x 300' roll
Abrasives
Size
Part No.
OnSite
Supply
Size
36" x 500'
Non-staining, water resistant WATER SHIELD is made from
a lamination of two strong kraft papers with nylon scrim
reinforcement. Water Shield protects flooring surfaces like
hardwood, laminate and tile and does not tear under normal traffic
wear, eliminating the need to constantly replace torn paper. Water
Shield is moisture resistant and durable enough to be re-used,
making it a more economical choice than other products such as
red-rosin paper.
Red Rosin Paper
Safety
Part No.
FS36500
Water Shield Reinforced Kraft Paper
Strong, economical paper for temporary
surface protection. (500 sq.ft./roll)
Part No.
Size
333921
36" x 167'
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
539
Rentals
A self-adhering protective film for hard surfaces, such as tile,
vinyl, VCT, laminates, marble, granite, and factory-finished
hardwood. A true multi-purpose product, it is ideal for use during
construction, remodeling, plumbing and electrical work and
painting. May be applied for up to 45 days. Reduces damage
claims and clean up time, resists ripping and tearing, does not
shift like paper and it applies and removes easily.
Tools
Floor Shield™
Fasteners
FLoor - Surface Protection
Anchors
Strut
Ram Board Temporary Floor Protection
Threaded
Rod
A heavy-duty, temporary floor protection
engineered for Contractors. Designed
with cost and efficiency in mind; it lays
out fast and flat and is re-usable. Ram
Board is non-staining and utilizes it's FlexFiber™ technology allowing for the curing
of new floors. It provides the perfect
solution when protecting new or existing
concrete, wood, tile, stone, linoleum, vinyl
composition tile (vct), epoxy, and most
other floor types.
Temporary Roof Leak Diverter
Pipe
Hangers
• Roof leak diverter collects roof drips and directs them to the
proper drainage area, preventing damage to machinery and
equipment below the leak.
• Connects to a standard garden hose (not included) and is easy
to set up for roof leak.
• Hang the large, vinyl-coated canopy by its 4 corner grommets,
connect the hose and direct it to a designated drainage area.
• Lightweight, vinyl-coated fabric is flame-retardant
Tools
Roll Size: 38" x 100' (317
sq. ft.) Weight (approx.):
48 lbs. Thickness: (approx.)
46 mil. 100% recyclable
and reusable.
Contributes
toward
USGBC
Certified LEED
Points.
Part No.
Size
RB38100
38" x 100' roll
Part No.
Size
399826
5' x 5' Leak Diverter
Abrasives
See Pages 541 and 542 for Tapes
Hole In One Covers
OnSite
Supply
Be sure to visit
www.GoNefco.com
Safety
for all of your surface protection
and dust control needs
Rentals
540
Hartford, CT
800-969-0285
•
•
•
•
•
•
•
Re-suable / Portable
Prevents accidents and injuries
Prevents OSHA citations
No sawing, pre-drilling or bolting into concrete necessary
Safety orange color
Assembly hardware included
Assembles and removes in seconds
Part No.
Size
Adjusts to:
1202-4491
7" diameter
2" to 5"
1202-4490
15" diameter
3" to 12"
1202-4493
8" x 15" rectangular
3" x 4" to 3" x 12"
1202-4492
15" x 15" square
4" x 4" to 3" x 12"
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Length (in.)
Color
Pkg.
Qty
Miniature
Color
Orange
Red
White
Yellow
3M 764 General Purpose
Vinyl Tape
All Purpose Colored Tapes
• 2” x 36 yards, 5-mil colored tape with excellent adhesion and elongation.
• Resists scrapes, wear, moisture and most
chemicals Rubber-based adhesive conforms
and seals even on irregular surfaces
• Packaged 24 rolls per case
• Sold per roll
AL-04-18-9-M
4
Natural
18
1000
AL-04-18-0-M
4
UV Black
18
1000
AL-06-18-9-M
6
Natural
18
1000
AL-06-18-0-C
6
UV Black
18
100
AL-07-50-9-C
7-1/2
Natural
50
100
AL-07-50-0-C
7-1/2
UV Black
50
100
021200-43185-2
White
021200-43425-9
Red
AL-11-50-9-C
11-1/4
Natural
50
100
021200-43450-1
Brown
021200-43452-7
Blue
AL-11-50-0-C
11-1/4
UV Black
50
100
AL-14-50-9-C
14-1/2
Natural
50
100
021200-43438-9
Orange
021200-43429-7
Black
AL-14-50-0-C
14-1/2
UV Black
50
100
021200-43178-4
Yellow
021200-43435-8
Green
AL-08-120-9-C
8.7
Natural
120
100
AL-08-120-0-C
8.7
UV Black
120
100
AL-14-120-9-C
15
Natural
120
100
Duct Tape
AL-14-120-0-C
15
UV Black
120
100
AL-18-120-9-C
18.4
Natural
120
100
AL-18-120-0-C
18.4
UV Black
120
100
AL-24-175-9-L
25.2
Natural
175
50
AL-24-175-0-L
25.2
UV Black
175
50
Two Grades: Utility and Contractor’s
Grade
• Contractor’s Grade is 11 mil
• Utility Grade is 8 mil.
• Waterproof
• Silver
• 2" x 60 yards
AL-36-175-9-L
37.2
Natural
175
50
AL-36-175-0-L
37.2
UV Black
175
50
AL-48-175-8-L
48.5
Gray
175
50
AL-ACTPAC-400-9
Assorted
Natural
400
AL-ACTPAC-400-0
Assorted
UV Black
400
Standard
Color
Part No.
Color
Part No.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Grade
4137
Contractors
83689
Utility
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Assortment Packs
Part No.
OnSite
Supply
Heavy Duty
Extra Heavy Duty
Fasteners
Pipe
Hangers
Part No.
Tensile
Strength
(lbs.)
Part No.
UNT34ORA
UNT34RED
UNT34WHT
UNT34YEL
Tools
Assortment Packs contain 100 pcs. each 4" and 7" and 200 pcs.
11". Available in Natural or UV Black.
Color
Black
Blue
Brown
Gray
Green
Part No.
UNT34BLK
UNT34BLU
UNT34BRN
UNT34GRY
UNT34GRE
Abrasives
• Faster - low insertion and pull through force.
• Stronger - high tensile strength achieved from one pice, advanced pawl and tooth design.
• Purer - manufactured from filtered nylon reducing particle
contaminiation.
• Easier - angled tail provides quicker initial insertion alignment
and tail finger grips allow easier handling and tightening.
• Safer - rounded edges provides added safety and eliminates
insulation damage
• 36" and 48" applications include HVAC duct straps and are
UL 181B listed.
• Call for sizes/styles not listed
7-mil colored tape with excellent adhesion and elongation.
Available in 9 colors for identification and marking
Colored Tapes packaged 10 rolls per sleeve/50 per carton
Black Tape packaged 10 rolls per sleeve/200 per carton
Sold per sleeve. (10 rolls)
UL listed
541
Rentals
Cable Ties
•
•
•
•
•
•
Threaded
Rod
Electrical Tape All-Weather, Colored Tapes
Strut
Anchors
Tapes / Cable Ties
Fasteners
Tapes / markers
Markers
Masking Tapes
Anchors
Designed for superior performance in
a variety of applications such as paint
masking, holding, light-duty, splicing,
bundling, packaging and many more.
For temporary marking of metal surfaces during fabrication. Natural soapstone provides superior marking. Does not contaminate
welds and is easily removable. 5" x 1/2" x 3/16".
Size
Part No.
Welder's Soapstone
General Purpose, Yellow
Strut
UNT77 3/4
3/4” X 60 yds.
UNT77 1
1” x 60 yds.
UNT77 1-1/2”
1-1/2” x 60 yds.
UNT77 2
2” x 60 yds.
UNT77 3
3” x 60 yds.
Description
Part No.
MKL 80129
Soapstone, 5" x 1/2" x 3/16"
MKL 80140
Soapstone Holder
Threaded
Rod
Easy Release Painters Tape, Blue
UNT9531-1
1” x 60 yds.
Carpenter Pencil
UNT9532-1.5
1-1/2” x 60 yds.
UNT9533-2
2” x 60 yds.
Premium quality flat lead for easier marking. Clean, accurate
marks on wood and other surfaces..
Description
Part No.
Carpenter's Pencil
MKL 96928
Pipe
Hangers
Packaging Tapes
For medium to heavy weight box
sealing, package repair, bundling,
and packages exposed to a wide
variety of shipping hazards and
stress.
Descriptioin
Tools
Part No.
UNTPPPC
Clear, 1.8 mil., 55 yds.
UNT4040C
Clear, 2.2 mil. 55 yds.
Markal
#500 Lumber Crayons
• Also known as layout chalk or keel
• Standard 1/2" hex shape fits Peterson #106, #108, and #109 holders
• Lead free
• Weather and fade-resistant; marks on cardboard, ceramics,
concrete, lumber, metal, paper, plastics, and rubber
• Packaged 12 of one color per box
• Marking range: –50°F to 150°F
Color
Part No.
Abrasives
Teflon Thread Seal Tape
Made of chemically inert material, withstands alkalies, acids, oils and solvents. Use on iron, stainless
steel, copper, brass, plastic, glass or rubber pipes.
Size
Part No.
50D520TET
1/2” x 520”
75D520TET
3/4” x 520”
OnSite
Supply
MKL80320
White
MKL80324
Orange
MKL80321
Yellow
MKL80326
Green
MKL80322
Red
MKL80327
Pink
MKL80325
Blue
MKL80328
Purple
MKL80323
Graphite Black
MKL80329
Brown
MKL80324
Orange
MKL80339
Terra Cotta
MKL80332
Aluminum
2 mil Aluminum Foil Tape with Liner
Safety
• For general purpose seaming, patching and
sealing
• Enhances appearance and maintains vapor
barrier integrity
• Excellent adhesion to clean/dry surfaces
• Flame retardant/UV resistant
• Product apps: HVAC duct wrap, protective mask for chemicalstripping of metal and other surfaces
• 2" and 3" W x 50 yds. long; 16/case
Markal Dura-Ink® Markers
• For use on cardboard, wood,
metal, paper, ceramics, glass, and
leather
• Meets Federal Specifications: TT-I-544
• Pack: 12 of one color per box, 48 per case
Part No.
Black, #15 Fine Point
Black #80 Medium Point
Black #100 5/8" Block Point
Rentals
Part No.
Size
Part No.
Size
UNT412
2" x 50 yds.
UNT413
3" x 50 yds.
MKL96913
Hartford, CT
800-969-0285
Size/Color
MKL96023
MKL96923
542
Color
Part No.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• Marks with real paint, dries in 3 minutes
• Valve action nib releases paint as needed for continuous
marking
• Marks on all surfaces including: metal, wood, glass,
plastic, rubber, cardboard, and paper
• Lead-free, low halogens
• Replaceable nib to assure complete use of each marker
• Durable metal barrel
• Meets California VOC Regulations
• Pack: 12 per box, 48 per case
Performance Industrial Enamels
Aerosols
Color
Silver Aluminum
RUS2169
Red Primer
RUS2117
Brightly Galvanized
Compound
RUS2182
Gray Primer
RUS2185
Cold Galvanizing
Compound
RUS7086
Quick Dry Gray
Primer
White
MKL96823
Black
Part No.
MKL96821
Yellow
MKL96825
Blue
RUS2115
MKL96822
Red
MKL96826
Green
Markal PaintStix®
Color
Strut
Part No.
MKL96820
Real paint in stick form
RUS2123
Light Blue
RUS2171
Tan
•
•
RUS2124
Safety Blue
RUS2175
Chestnut Brown
RUS2125
Deep Blue
RUS2176
High Temp Black
RUS2134
Bright Green
RUS2178
Flat Black
RUS2137
Dark Green
RUS2179
Black
•
•
•
•
Real lead-free paint in stick form
For use on metal, wood, plastic,
concrete, rubber, glass, cardboard, and paper.
Marks on smooth, rough, rusty or
dirty surfaces and also marks through oil and water.
Standard size: 11/16"
Temperature range: -50°F to 150°F
Marks on any material, surface or texture
Color
Part No.
Color
Part No.
RUS2143
Safety Yellow
RUS2183
Lt. Machine Gray
RUS2155
Safety Orange
RUS2187
Dk. Machine Gray
RUS2156
Equipment
Orange
RUS2192
Gloss White
Safety Red
White
MKL80227
Pink
RUS2163
MKL80221
Yellow
MKL80228
Purple
Call for complete listing of colors available
MKL80222
Red
MKL80229
Brown
MKL80223
Black
MKL80230
Gray
MKL80224
Orange
MKL80231
Gold
MKL80225
Blue
MKL80232
Aluminum
MKL80226
Green
Tools
MKL80220
Rust-Oleum®
Overall® Economical
Aerosols - 10 oz
Abrasives
Value Line
Part No.
Color
Color
Part No.
Color
RUS2401
Sandable Gray
Primer
RUS2409
Yellow Gloss
RUS2402
Black Gloss
RUS2410
Green Gloss
KRYS03401
Brilliant White
KRYS03407
Brilliant
Green
KRYS03402
Brilliant Yellow
KRYS03408
Fluor. Orange
RUS2403
White Gloss
RUS2411
Brown Gloss
KRYS03409
Fluor. Red
RUS2404
Black Flat
RUS2412
Aluminum
KRYS03410
Fluor. Red/
Orange
RUS2405
White Flat
RYS2413
Machine Gray
RUS2407
Red Gloss
RUS2414
Orange Gloss
Blue Gloss
RUS2416
Red Primer
KRYS03403
KRYS03404
Brilliant Orange
Brilliant Red
KRYS03405
Fluorescent Pink
KRYS03500
Clear
RUS2408
KRYS03406
Brilliant Blue
K08360
Marking Wand
Call for complete listing of colors available
Safety
Color
Part No.
Part No.
OnSite
Supply
Quik-Mark™
Inverted Marking Paints
• High solids formulation for bold, bright, visible markings
• Fast-drying, high-solids formula penetrates and
adheres to hot surfaces
• Convenient Spray-Thru™ cap and non-clogging spray tip
• VOC compliant, free-of-lead hazards
Threaded
Rod
Color
Part No.
15 - 20 oz fill weight:
Very high solids - fast dry premium industrial
coatings
Pipe
Hangers
Color
Part No.
Anchors
Markal Valve Action Paint Marker
Fasteners
MArkers / Paints
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
543
Rentals
Call for complete listing of colors available
Fasteners
Paints / CAULK
Striping Products
Anchors
Pavement Striping Machine
• 7” wheels provide a smooth ride on hard
surfaces, such as concrete, blacktop and metal
• Excellent for use in parking lots, warehouses,
plants, factories, etc.
Line-Up® Pavement Striping Paints
Strut
• Fast drying
• Long-lasting durability on outdoor pavement
and indoor surfaces
• Non-clogging spray tip
• VOC compliant, free-of-lead hazards
Part No.
Color
Threaded
Rod
K08340
K08300
K08301
K08302
K08303
Walk Behind Striping Cart
White Striping Paint
Yellow Striping Paint
Blue Striping Paint
Red Striping Paint
Pipe
Hangers
• Constructed of durable, rugged plastic and
lightweight steel
• Comfortable pistol grip for easy handling
and marking
• Apply a uniform, 1" to 1-1⁄2" width of paint
SU5005
Striping Wand for Striping Paint
Tools
Part No.
Description
KRYK0360
Wheeler Hand-Held Wand (34" Length)
100% RTV Silicone
Rubber Adhesive/Sealant
SU5005 is a general purpose, high quality 100% RTV acetoxy
silicone used for the adhesion of glass, most woods, metal,
ceramics, porcelain, synthetic rubbers and many plastics.
SU5005 is a “Food Grade” silicone with the following approvals:
NSF Standard 51, FDA 21-CFR-177.2600, USDA Rating P1,
UL, Mil-A-46106A, TTS-001543A and TTS-00230C, ASTM C
920-87. Service temperature range: -80°F to 400°F. Intermitten
temperature limit of 500°F. Available colors: Clear, White,
Aluminum, Black, Bronze, Blue and Almond. Special colors
available.
SU5005
Red High Temperature
RTV Silicone Adhesive/Sealant
SU5005 Red High Temperature silicone is used in identical
situations as the standard SU5005 and carries the same
approvals.
Abrasives
Service temperature range is -80°F to 500°F. Intermittent limit of
600°F.
SU6000-40
Polyurethane Adhesive/Sealant
SU6006-40 is a diverse polyurethane sealant used in concrete
and metal/metal applications.
OnSite
Supply
Skeleton Caulking Guns
41001
Safety
• 1/10 gallon
• Uni-rail construction
• Hex piston
• Fits standard cartridges
• Heavy duty - long life
Rentals
544
10.1 oz
and quart guns
available
The SU6000-40 is a paintable sealant used in joints of vehiclestruck bodies, window sills, rail cars, mobile homes, and related
products. Offers excellent adhesion and elasticity to joints subject
to vibrations, stress, expansion and contraction. Colors available:
white, black, bronze, and gray. Special colors available. Meets
TTS-00230C, ASTM 920-87, USDA and FDA specifications.
SU3000
Siliconized Acrylic Latex Paintable Caulk
SU3000 is a premium 25 year siliconized caulk used in various
indoor and outdoor applications with excellent adhesion to
aluminum, wood, concrete, glass, ceramic tiles, etc.
SU3000 can be painted with latex or oil-based paints. Mildew
resistant, non-yellowing. Meets ASTM C-834-91 specifications.
Colors available: white. Special colors available.
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Pure Gray Bristle Brush
Beaver Tail Handle
Black Plastic Kaiser Handle
Black Plastic Handle
A Good Chip And Oil Brush
Width (in) Thickness (in)
Trim
Length (in)
Std.
Pkg.
Part No.
1/2
1-3/4
12
70067
Trim
Length (in)
Gray Tampico
10
1-1/16
Stiff Pure China Bristle*
1-1/2
2-3/8
71108
Std.
Pkg.
Part No.
12
73028
12
70115
Width (in) Thickness (in)
2
5/16
Trim
Length
1-3/4
Size
Trim
Length
(Inches)
Std.
Pkg.
Part No.
6
7/8
2-1/8
12
70093
Part #
Size
Thickness
Trim
89695
89696
89697
89698
89700
89701
89702
1/2"
1"
1-1/2"
2"
3"
4"
4"
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
11/16"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
1-3/4"
2-1/2"
Part No.
85033
Width (in) Thickness (in)
Trim
Length (in)
Std.
Pkg.
Part No.
3/8
6-1/8
144
74060
7/8
Part No.
Desc
RM410
Paint Tray Liner
Desc
99076890 9" Roller Frame
99748540 9" Roller Frame
9TU038
9SC038
4SC038
Thickness
(Inches)
Trim
Length
(Inches)
Std.
Pkg.
Part No.
6
9/32
1-1/8
12
74035
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Makes clean-up easy. Fits most
standard trays
Desc
Pure White Bristle Round Marking Brush
Size
Plastic Paint Tray Liner
Roller Frames and
Covers
Part No.
Long Plain White Handle
ROOFERS
CHOICE
Metal Paint Tray
Horsehair Tin Ferrule
Acid Brush
86024
For a wide range of projects. Economy white
bristle.
Rustproof steel with ladder-lock
legs. Accommodates 7” or 9”
rollers. Holds up to 3 quarts.
Thickness
(Inches)
Part No.
72
Chip Brushes
Metal Paint Tray
Oval Sash Tool Brush
Natural Plastic Handle
Std.
Pkg.
9" Roller Cover
9" H.D. Roller Cover
4" H.D. Roller Cover
Heavy-duty 9" Roller Frame
with 5/16" dia. metal frame
features two plastic caps,
a five-wire cage and a solid
plastic handle with a threaded
grip. 9" Paint Roller Covers:
100% synthetic fiber (3/8” nap)
attached to a 3-ply phenolic
core backing works well with
all paints. 4" Roller Frame with
1/4" dia. metal frame measures
23"L. 4" Polyester Covers
work well for latex paints. 4"
Polyester Cover is especially
suited for wall and floor edging
and line painting. Great for
driveway and aisle markings.
See Roofing Supplies - Pages 590 -595
Boston , MA
800-645-6155
Strut
Wood
Handle
Part No.
86016
86017
86018
86019
Threaded
Rod
Plastic
Handle
Part No.
86004
86006
Pure Black China Bristle
12
Pipe
Hangers
Std.
Pkg.
72
72
72
48
Pointed Top — Handy Tool for
Cleaning Motor Parts
Size Diameter (in)
2
7/16
Red Plastic Handle
Parts Cleaning Brushes
2
Tools
Trim
Length
(Inches)
1-1/2
1-1/2
1-1/2
1-1/2
Part No.
Hartford, CT
800-969-0285
545
Abrasives
Thickness
(Inches)
5/16
5/16
5/16
3/8
Std.
Pkg.
OnSite
Supply
Width
(Inches)
1
1-1/2
2
3
Trim
Length (in)
Economy Synthetic Paint Brush
Economy Pure White
Bristle Brushes
Width (in) Thickness (in)
Safety
1/4
Rentals
Fasteners
Pure White China Bristle Brush
Anchors
Painting Supplies / Brushes
Fasteners
MAterial Lifts
Anchors
Models 2124, 2118 and 2112
1.
Cable Safety Brake
Strut
Each mast and carriage can have a factory installed, gravity actuated
safety brake which holds loads in place in the event the cable should go
slack
2.
Fork Extensions (No. 783535)
With the push of a button, forks may be extended from 28” to 42".
With longer forks, the weight capacity decreases to 200 lb. and is
clearly shown on the forks when extended. A second button returns the
extension for convenient storage inside the forks
3.
Boom Carriage (No. 783642)
Threaded
Rod
Ideal for installing pipe or lifting “from the top” applications. Uses four
attaching plunger pins and has a 40" reach. Hook has five locations and load capacity
decreases the farther out the boom is extended (from 650 lb. to 200 lb.)
Series 2100 Contractor Lift Specifications
Dimensions
Pipe
Hangers
2112
2118
2124
Height - stowed
84"
84"
84"
Length - stowed
34"
34"
34"
Height - operating
84"
84"
84"
Tools
62"
73"
73"
31.25"
31.25"
31.25"
Width with stabilizer legs
74"
74"
74"
Ground clearance
2.5"
2.5"
2.5"
6"
6"
6"
Length - operating
Base width
Load height (minimum)
Abrasives
Maximum height (forks down)
11’1"
16’6"
21’11"
Maximum height (forks up)
13’1"
18’6"
23’11"
Standard Fork width
21.5"
21.5"
21.5"
Standard Fork length
28.0"
28.0"
28.0"
252 lb
321 lb
366 lb
Load capacity, 14" load center
650 lb
650 lb
650 lb
Load capacity, with fork
extensions
200 lb
200 lb
200 lb
Weight
Net weight
Load Capacity
OnSite
Supply
Fork Specification
Safety
Standard fork width
21.5"
21.5"
21.5"
Standard fork length
28"
28"
28"
Fork length with extensions
42"
42"
42"
Fork weight
32 lb
32 lb
32 lb
Fork weight with extensions
38 lb
38 lb
38 lb
Rentals
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
546
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Material Lifts / Carts
784650
Strut
Description
EL-405 Stacker Lift
Pipe
Hangers
Part
No.
Threaded
Rod
• 400 lb. lifting capacity
• 53" lifting height
• Two speed winch handle position
• Quick action wheel brake
• Large lifting surface
• Ideal, adjustable work platform for
repair shops
• Great for loading customer vehicles
• Large lifting tray - 24" x 28"
• Quick action retention strap holds lift on tray.
Strap features retractor to house loose strap
and seat belt style push-button release and
ratchet tightening mechanism.
Anchors
EL-405 Stacker Lift
209-14S-LE
Abrasives
Tools
Cylinder Carts with Lifting Eye & Fire-Rated Wall
213-14S-LE
Full Range, High Rail Cylinder Cart
(Model #213)
Part
No.
Part
No.
782441
782493
Description
Model 209-14S-LE Lifting Eye & Divider Wall
Model 209-16P-FW-LE Lifting Eye & Fire-Rated Wall
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
The high rail feature secures tanks on to the cart while
moving around job site situations. Full range cart holds
one 244–330 cu. ft. (9-1/4") oxygen tank and one 210–
420 cu. ft. (13-1/2") acetylene tank. Equipped with 13 x
25" base plate, a large, open tool tray and 16" pnuematic
wheels as standard equipment.
782493
782495
Boston , MA
800-645-6155
Description
Model 213-14S-LE Lifting Eye & Divider Wall
Model 213-16P-FW-LE Lifting Eye & Fire-Rated Wall
Hartford, CT
800-969-0285
547
Rentals
Ideal for handling two tanks (a 244-330 cu. ft. oxygen and
a 145 cu. ft. acetylene 9-1/4" diameter tank). High rail design contains cylinders while moving about job sites. This
cart comes with 9 x 18" base plate, a large, open tool tray
and 14" steel wheels as standard equipment.
Safety
Medium Range, High Rail Cylinder Cart
(Model #209)
OnSite
Supply
Fire-Rated Wall complies with OSHA 1926.350 & OSHA 1910.253
Fasteners
Carts
Heavy Duty Utility Cart
Now... 2 Styles to Choose From
Anchors
Tilt Trucks
Strut
Ergonomically designed push handle
provides optimum hand placement and push
height improving control and worker safety
Rubbermaid tilt trucks are easy to maneuver, allowing for
quick collection and dumping of materials. Smooth, seamless
construction resists pitting and corrosion. Easily cleaned using
water or high pressure steam. All welded tubular frame assembly
offers maximum strength with minimum weight. Trucks are Gray
and optional lids are available.
Threaded
Rod
Pipe
Hangers
P/N
cu.
yd.
Gal
Wt.
Cap.
L x W x H
Wheels
4520-88 New Handle Style
#1304
1/2
100
300
52.5" x 27" x 37.5"
10" semipneumatic
Perfect for transporting materials, supplies, and heavy loads in
almost any environment. 500 lb. capacity
#1314
1
200
750
70.25" x 32" x 42"
12" semipneumatic
• Ergonomically designed push handle provides optimum hand
#1317
Lid for #1314 Cart
#1025
1.5
303
1000
84" x 42.5" x 50"
12"
vulcanized
#1035
2
404
1800
84" x 46" x 50.5"
12"
vulcanized
#1046
2.5
505
2300
84" x 55" x 50.5"
12"
vulcanized
Molded-in storage compartments, holsters,
hooks, and notches
placement and push height improving control and worker safety
• Molded-in storage compartments, holsters, hooks, and notches
• Molded-in customize-able fittings
• High density structural resin construction
• Easy-access bottom shelf
• Best-in-class casters to meet the most demanding
environments
Tools
Light Duty Utility Cart
Abrasives
Versatile, durable carts
perform a wide variety of
tasks.
Heavy duty utility cart with
optional shelf
• Easy-to-clean smooth
4520-89 Original Flat Top Style
OnSite
Supply
• No sharp edges to damage walls or furniture
• 5” rubber casters for quiet movement
• Easy to keep clean and sanitary
• No painting or maintenance required. 400 lb. capacity
• Optional middle shelf available
P/N
Description
Safety
4520-88
construction help eliminate
noise.
• User-friendly easy to grip
handles.
• Large 4" non-marking
swivel casters.
• High style appearance
with brushed aluminum
uprights.
• 200 lb. weight load.
New Style 36" x 24" Utility Cart w/ ergonomic
handles
4597-88
Optional Shelf for 4520-888 Utility Cart
4520-89
Original 36" x 24" Utility Cart
4598-G88
Optional Shelf for 4520-89 Utility Cart
Rentals
548
surfaces.
• Quiet casters and plastic
Hartford, CT
800-969-0285
P/N
3424-88
Boston , MA
800-645-6155
Description
Light Duty Cart, 16.25" x 31.5" x 36"H
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Round dolly features 5
casters for extra stability.
Fit 20, 32, 44 and 55
gallon Brute® receptacles.
Choose from flat lids (for
10, 20, 32, 44 and 55
gallon), dome tops (for
32, 44 and 55 gallon) or
funnel top (for 32 gallon)
receptacles. White and
Gray brutes are NSF and
USDA listed. Complies
with FDA regulations.
Please specify color when
ordering.
Strut
The all-plastic construction won’t rust, chip, peel, dent or crack.
A double-ribbed base provides increased stability and dragging
capacity. Molded base grip allows secure two-handed lifting. The
reinforced rim provides added strength and durability. Optional
rugged twist on/off dolly adds mobility to the Brute ® receptacle.
Funnel Top
(Grey Only)
Dome Top
(Gray, Orange or Red)
20 Gallon round brute container and lid:
2620
Container, white, grey, yellow, blue,
19-1/2” dia x 22-7/8” H
2619-60
Flat lid, grey, white, yellow
44 Gallon round brute containers, tops and lids:
2643
Container, all colors available
24” dia x 31-1/2” H
2645-60
Flat lid, all colors available
2647-88
Dome top lid, all colors available,
24-13/16” dia x 12-19/32” H
Reinforced Rim for
added strength and
durability
Container (Gray, White,
Yellow or Red)
Double-ribbed base
increases stability
and dragging
capacity
Conversion Dolly
(Black)
Tools
32 Gallon round brute containers, tops and lids:
2632
Container, all colors available,
22” dia x 27-1/4” H
2631
Flat lid, all colors available
2637-88
Dome top lid, all colors available,
22-11/16” dia x 12-1/4” H
Domed Lid converts
a 32, 44 and 55
gallon container into
a rugged outdoor
receptacle.
Pipe
Hangers
10 Gallon round brute container and lid:
2610
Container, white or grey,
15-5/8” dia x 17-1/8” H
2609
Flat lid, dark. grey, white
Threaded
Rod
Description
55 Gallon round brute container, top and lid:
2655
Container, gray only, 22” dia x 27-1/4” H
2654
Flat lid, gray only
2657-88
Dome top lid, all colors available,
22-11/16” dia x 1-3/8 H
2640
Round conversion dolly
Husky™ Trash Bags
The best bag for the best price.
Abrasives
Part No.
Brute® receptacles are designed for refuse, food and material
handling. Specially formulated resin resists most acids and
chemicals. Withstands sub-zero temperatures and its seamless
construction makes for easy cleaning, even steam cleaning!
Fasteners
Round Brute® Receptacles
Anchors
Garbage Cans
Description
9W21
9W27
Big Wheel™ container — no lid
Big Wheel™ — with lid (50 Gal.)
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Capacity
PA2042HB 42
PA3232HB 42
HKHW250B 42
HK450548M 45
Boston , MA
800-645-6155
Gallon
Gallon
Gallon
Gallon
Mil
Case/
Count Pallet
Case Net
Weight Plt. Wt.
3.00
3.00
3.00
1.00
20
32
50
54
6.33
10.14
15.84
6.16
Hartford, CT
800-969-0285
84
63
48
93
532
639
760
572
549
Safety
Part No.
Part No.
Rentals
Big Wheel™ container holds 65 gallons
and has the advantage of built-in wheels,
making it a convenient way to collect
and transport trash — even up and
down stairs. Built-in handles for easy
maneuverability. 8” Wheels, choose from
blue, yellow and gray. Optional “we
recycle” imprint available.
OnSite
Supply
Big Wheel™ Container
Fasteners
Mops
Anchors
Brute® Mop Bucket
Round & Double Pail Buckets
Designed for everyday use. Available
in 10 qt. and 14 qt. sizes, gray only.
Double pail buckets allow cleaning
solution and rinse water to be carried
in the same bucket. Great for on the
spot cleaning. Available in 17 qt and
19 qt sizes. Gray only.
• Large 26-35 U.S. quart capacity
• Ergonomic design.
• Contoured bail.
• Large pour spout and rear handle are
designed to make emptying easier.
• Contoured graduation markings
indicate both quarts and liters.
Strut
• Please specify brown or yellow.
Part No. Description
Part No. Description
2EX-1004 Brute® Mop Bucket
2EX-1005 EZMT® Mop Bucket with foot-operated drain mechanism
2EX-0139 Round 10 qt bucket
2EX-0103 Round 14 qt bucket
Part No. Description
2EX-0104 Dbl. pail 17 qt
2EX-0108 Dbl. pail 19 qt
Threaded
Rod
Mop Handles
Invaderr® handle’s hinged side gate allows entire mop to easily
slide on and off. A thumb wheel clamps the mop firmly in place.
Lightweight, rust-proof mop handle won’t chip, crack, peel or fade
even after prolonged use. Available in 60” hardwood or aluminum.
Mopping Combo Packs
Pipe
Hangers
Part No.
Description
22EX-0163 Brute Bucket & Side Pressure Wringer
2EX-1006 EZMT® Brute Bucket & Side Pressure Wringer
2EX-1007 Brute Bucket & Downward Pressure Wringer
2EX-1008 EZMT® Brute Bucket & Downward Pressure Wringer
Place a mop between the jaws of the Gripper® wet mop handle, screw
the collar tight and you have a handle that holds your mop firmly and
securely. Available in 60” hardwood, aluminum or vinyl clad aluminum.
Tools
Value Pro™ Cut End Mops
Abrasives
Part No.
Description
2EX-0046-16 16 oz
2EX-0046-24 24 oz
Part No.
Part No.
Description
OnSite
Supply
Front pull lever on the handle operates
solid steel rollers, squeezing liquids from
the mop without using a traditional wringer.
Replaceable 12” cellulose mop heads
available.
Safety
Description
2EX-0431-06
2EX-0431-12
Rentals
550
2EX-0536-16
2EX-0536-26
2EX-0535-16
2EX-0535-36
Description
60”
60”
60”
60”
Invader, hardwood
Invader, aluminum
Gripper, aluminum
Gripper, aluminum, vinyl-clad
2EX-0046-20 20 oz
2EX-0046-32 32 oz
Steel Roller Sponge Mop
Part No.
Gripperr®
Invaderr®
General, all-purpose mops feature a
4-ply cut-end cotton yarn for higher
absorbency. Headband size is 5”. Available
in 16 oz, 20 oz, 24 oz, and 32 oz. Rated the
most economical mop with a good cut-end.
Sponge Mop
Replaceable Sponge Head
Hartford, CT
800-969-0285
Metal Mop Handles
Spring Grip allows for changing of
wide band mops .Zinc plated for
rust resistance. 60” long with wood
handle. Available with either wood
or steel handle.
Part No.
Description
Part No. Description
2GF-0023 Spring Grip
2GF-0020-91 Janitor 54” steel
2GF-0018-64 Janitor, 54” wood 2GF-0020-94 Janitor 63” steel
2GF-0018-63 Janitor, 63” wood
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Part No.
89322
89324
Description
6-1/4" Bass/Palmyra Fill
5-1/4" Plastic Fill
Tapered wood handle
Corn Broom
Selected corn filament for light
sweeping on smooth floors.
Compact broom with 3 twine
sews and wire band for long
life.
Part No.
89377
Description
Corn Broom
Block Size
18"
24"
30"
Part No.
89230
89231
89224
Block Size
24"
30"
Strut
Excellent for sweeping extra-heavy dirt,
debris, gravel, chips, etc. Use on rough,
dry, wet, oily or greasy surfaces.
Threaded
Rod
Part No.
89345
89348
89897
• Silver flagged-tipped plastic bristle. 3" trim.
For sweeping smooth, highly polished
floors and smooth concrete. Sweeps even
the finest dust or grit. Two threaded holes.
• Palmyra bristle. 4" trim.
Push Broom - Medium
Push Broom - Medium
Sweeping
- Black Tampico
Sweeping
• Black Tampico bristle., 2-5/8" trim.
Black Polystyrene (Synthetic) For all-purpose sweeping of medium• Black synthetic bristle. 3" trim.
For all-purpose sweeping of medium-to-heavy
soil and debris. Use on wood, concrete and
semi-rough floors. Solvent resistant.
Part No.
89273
89274
Block Size
18"
24"
to-heavy soil and debris. Use on wood,
concrete and semi-rough floors. A rugged
brush for dry, wet and oily surfaces.
Block Size
18"
24"
30"
Part No.
89249
89252
89255
Pipe
Hangers
Bass/Palmyra mix fill for either wet or
dry sweeping or brown plastic fiber with
flared ends, will outlast most natural fibers.
Handle sold separately.
Push Broom - Fine
Sweeping - Silver Line
Push Broom - Coarse
Sweeping - Palmyra
Tools
Street & Highway Broom
Anchors
Floor Sweeps - Strip Brooms
Fasteners
Brooms
Dust Pans
Whisk Broom
89876
Steel
Description
Whisk Broom
89875
Plastic
89875
Plastic Dustpan, 12" edge
89876
Steel Dustpan, 12" edge
See Next Page for Sweeping Compound
OnSite
Supply
Part No.
89378
Description
Part No.
Metal cap with hanging ring. Selected corn
filaments for use on dust, lint and fine dirt
in office, factory or home.
Abrasives
Gray plastic dust pan is durable,
lightweight and will not dent. Black metal
dustpan is 20 ga. steel with enamel finish
Strip Broom Handles and Braces
Heavy Duty Handle Brace - Sturdy, reusable steel brace
clamps around handle and fastens to block with screws.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
89921
Part No.
89889
89891
89921
89922
Boston , MA
800-645-6155
89922
Length
Diameter
60"
15/16"
60"
1-1/8"
Standard Handle Brace
Heavy Duty Handle Brace
Hartford, CT
800-969-0285
Type
Wood Handle
Wood Handle
551
Rentals
Standard Handle Brace fits on underside of handle
between handle and block. Attaches easily with wing nuts.
Reusable.
Safety
Wooden handles are made of smooth lacquered hardwood.
Metal screw tip easily attaches to push brooms.
Fasteners
Squeegees / Brushes
Squeegees
Brushes
Anchors
Three Knot Roofing Brush
Counter Brushes
Floor Squeegee
Strut
Premium performance squeegee features
superior construction and heavier blade for
industrial use.
Length
Part No.
Counter Dusters in two grades (Heavy Duty
and Premium) for convenient light cleaning
and sweeping of small flat surfaces such as
counters, table tops and work surfaces. 8"
Overall length, 2" Trim. Wood Block
Threaded
Rod
18" Straight
89474
24" Straight
89475
30" Straight
89476
36" Straight
89478
24" Curved
89479
30" Curved
89480
36" Curved
89897
54" Tapered Wooden Handle
Description
Part No.
89800 Roofing Brush
89897 Tapered Wood Handle
Description
Part No.
89473
Premium Line - Fine Sweep
89390
For applying roof and
foundation coatings.
6-1/4" wood block.
3-1/2" Tampico
filament trim. Requires
tapered wood pole
handle. For use with
hot or cold coatings..
Black horsehair
Heavy Duty Coarse
89402
Black tampico
Masonry Brushes
Pipe
Hangers
White tampico fiber set
into hardwood block.
Extra heavy fill, handle
attached.
Description
Part No.
89808 6" Block, 2 rows, 3" trim
89814 6-1/2" Block, 5 rows, 3-7/8" trim
Pot & Fender Brushes
Tools
Window Squeegee
Angle type front. Plated steel frame and
handle socket. Red Gum blade (1"W x 3/16"D)
securely fastened with machine screws.
Length
Part No.
For general purpose scrubbing and
industrial use on metal surfaces,
specifically cans, auto fenders, wheel
covers, hub caps, etc. Choose pamyra fill
for more aggressive cleaning and Tampico
fibers for less abrasive cleaning. Available
with either long handle or short.
Abrasives
Part No.
89465
8" window squeegee
89467
12" window squeegee
89491
8" replacement blade
89476
12" replacement blade
Deck Scrub Brush
Heavy duty scrubbing on concrete floors,
carpeting, boats, rough wood floors, etc.
Brown palmyra fill. 6 x 18 rows.
Description
89447
2" Tampico trim, 10" Handle
89443
2" Tampico trim, 21-1/2" Handle
89445
2" Palmyra trim, 10" Handle
89440
2" Palmyra trim, 21-1/2" Handle
Description
Part No.
89514 10" Deck Scrub Brush
89515 12" Deck Scrub Brush
89897 Tapered Wood Handle
Sweeping Compound
OnSite
Supply
Sweeping Compound
Dust absorbing fiber based material is available in an oilbased or water based (wax) product for use on concrete or
wood floors. Will not mat down or cling to brush or floor.
Window Squeegee Pole
Safety
Fiberglass professional quality extension
pole. Fiberglass housing with aluminum
extension. 4' - 8' reach.
Description
Part No.
89913
Rentals
552
Window Squeegee Pole
Hartford, CT
800-969-0285
Description
Part No.
Boston , MA
800-645-6155
397138
65#/15 Gal. Boxed, Oil Based Green
400867
70#/15 Gal. Drum, Oil Based, Green
197556
100# Drum, Oil-Based, Green
400869
70#/15 Gal. Drum, Water Based Green
82037
50# Bag, Water Based, Green
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Description
Part No.
85082
Block wire brush
Be sure to visit
www.GoNefco.com
for the latest Tools, Products
and Special Offers!
Description
Part No.
Description
Part No.
85054
Carbon steel fill
85045
Carbon steel fill
85055
Stainless steel fill
85047
Stainless steel fill
85056
Bronze wire fill
Shoe Handle Wire Brush
Wire Brush w/Scraper
Heavy duty scratch brush has curved wood
handle and steel scraper attachment. 3 x
19 carbon steel wire rows. 13-3/4" x 5/8".
Brush part 6-1/4" L. Trim length 1-3/16".
85003
Effective for cleaning pipe threads and
welds. Also for removal of rust, paint, dirt
and debris. 4 x 16 carbon steel wire rows.
10-1/4" x 1-1/8". Brush part 5" L. Trim
length 1-3/16".
Description
Part No.
Strut
Excellent for cleaning concrete forms. 6 x
19 carbon steel wire rows. Width: 2-1/4".
Brush part 7-1/4" L. Trim length 1-3/4".
Heavy duty scratch brush has curved wood
handle. 3 x 19 carbon steel or stainless
steel wire rows. 13-3/4" x 5/8". Brush part
6" L. Trim length 1-3/16".
Solid bent hardwood block, excellent for
spot cleaning small welds. 3 x 7 wire rows.
7-1/2" x 1/2". Brush part 1-1/2" L. Trim
length 1/2".
Description
Part No.
Scratch brush w/scraper
85033
Shoe handle wire brush
Threaded
Rod
Block Wire Brush
Small Cleaning Wire Brush
Pipe
Hangers
Curved Handle Wire Brush
Fasteners
Wire Scratch Brushes
Anchors
Brooms
Sand-Light™ Abrasive Hand Pads
Tools
Brown
Primary application: Ferrous and/or Non-Ferrous metals
• Heavy duty
• Excellent for removing heavy rust and cleaning welds
Maroon
Abrasives
Primary application: Ferrous and/or Non-Ferrous metals
• General purpose
• For removing light rust
• Excellent for cleaning and brightening
Black
Green
Primary application: Ferrous and/or Non-Ferrous metals
Secondary application: Paint, Varnish
• General cleaning
• Excellent for stripping paint and varnish
COM
PARE TO
SCOTCH
-BRITE 3M
™
PADS
!
OnSite
Supply
Primary application: Stainless Steel
Secondary application: Ferrous and/or Non-Ferrous metals
• For blending and finishing
• Excellent for paint removal
Size
6" x 9"
White
Primary application: Fiberglass, Vinyl, Plastic, Formica
Secondary application: Ceramic
• Light duty
• For light cleaning and polishing
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Part No.
Qty
X-Ref
Heavy Duty
Grade
Brown
Color
77440
20
3M-7440
Gen. Purpose
Maroon
77447
20
3M-7447
Stainless
Black
77446
20
3M-7446
Stripper
Green
77496
20
3M-96
Ultra Fine
Gray
77448
20
3M-7448
Light Duty
White
77486
20
3M-7445
Hartford, CT
800-969-0285
553
Rentals
Primary application: Non-Ferrous metals
Secondary application: Wood
• Ultra fine
• For light finishing
• Excellent for sanding before/between finish coats
Safety
Gray
Fasteners
Cleaners
Simple Green
Cleaner/Degreaser
Anchors
Water-based cleaner/
degreaser that may be used
full strength or diluted. Mild
pH. Exempt from OSHA
or EPA requirements for
special handling or personal
protection.
Strut
Description
Part No.
19024 24 oz. bottle, 12/case
19128 1 gal. bottle, 4/case
19005 5 gal. pail, 1/case
Scrubs Hand Cleaner Towels
Threaded
Rod
Scrubs® pre moistened towels get your
hands clean and leave them conditioned
and protected anywhere that you are
working. 12/case.
DYK42272
Pipe
Hangers
Tools
CRC Mechanix
Orange™ Citrus
Lotion Hand
Cleaner with
Pumice
Abrasives
Fast, gentle, pH balanced;
orange scent. Cleans away
tough dirt and grime with
pumice and the natural
cleaning powder of citrus.
Fortified with glycerine
and aloe vera. 16 oz.
squeeze bottle. 12/case
Part No.
SL1712
OnSite
Supply
CRC Sunswipe™ Sunscreen
Towelette
Safety
Rentals
Fantastik Cleaner
All-purpose spray-on
cleaner. No rinsing
required. Non-abrasive. 32
oz. spray bottle. 12/case.
Part No.
94368
applications.
Description
Part No.
14407 30 oz. bottle, 12/case
14416 1 gal. bottle, 4/case
14417 5 gal. pail, 1/case
Formula 409
Cleaner
CRC Heavy Duty
Degreaser
All-purpose spray-on
cleaner and degreaser.
No rinsing required. Nonabrasive. 32 oz. spray
bottle. 12/case.
Removes most industrial
soils. Non-flammable,
chlorinated solvent
evaporates rapidly and
dries residue free; use on
industrial and electrical
equipment. Suitable for any
application permitting the
use of chlorinated solvents
and not involving sensitive
plastics. 19 oz. aerosal can. 12/case.
Protects skin from the
sun’s harmful UVA,
UVB and IR rays.
12” x 12” towelette
pre-moistened with
powerful sunscreen
and soothing Aloe
Vera. Fortified with
vitamins E, A and D.
144/case
554
Part No.
Effectively penetrates and
lifts heavy deposits of
grease, oil and dirt. Can
be used full strength or
diluted. Biodegradeable,
non-flammable and lowfoaming. Can be used
in pressure washing
Part No.
Removes mildew, soap
scum, grime and algae.
Environmentally safe.
Professional strength.
Non-abrasive. 32 oz. spray
bottle. 12/case.
483-600
Hydroforce
Industrial
Strength Cleaner/
Degreaser
®
Mean Green
Mildew
Destroyer
35293
Windex Glass
Cleaner
Part No.
03095
Windex Blue with Ammonia
for fast, streak-free
cleaning power. May
also be used for cleaning
appliances, porcelain, tile,
chrome as well as glass.
Liquid Bleach
Sodium hydroxide
for cleaning and
disinfecting.
Manufacturer may vary.
1 gallon jug.
Part No.
Part No.
14012
226211
Hartford, CT
800-969-0285
Part No.
Boston , MA
800-645-6155
Part No.
90139
90940
Washington D.C.
877-419-2755
Description
32 oz. spray
bottle, 12/case
1 gal. refill,
4/case
Philadelphia, PA
610-647-8070
Premium petroleum
oils, extreme pressure
additives, corrosion
inhibitors and Teflon
combine to result in a
dramatic decrease in
friction and wear even
under the most severe
pressure and abrasive
conditions. Penetrates
to displace, clean
and lubricate. Teflon
rejects dirt, dust, sand
and other abrasive
foreign particles.
Baking Soda
257809
CRC Compressed Air
Plastic safe, nonflammable, cleans
without wetting surface.
Provides a powerful
blast that removes dirt,
dust and light debris
from any surface. Quick
maintenance product
requiring no dry time.
Excellent for removing
debris from cracks and
joints on non-moveable
equipment. 8 oz. aerosol.
Part No.
WD-40 Lubricant
Formulated for ultrahigh surface attraction
to metal. Displaces surface moisture and
establishes a protective barrier. Provides
rust and corrosion protection. Penetrates
to loosen rusted or frozen parts. Cleans
dirt, grime, grease and oil. Excellent
lubricating properties. Silicone-free,
clean-to-use and leaves no messy, gummy
residue. Available in 2 or 12 oz aerosols
and, 1, 5 or 55 gallon containers.
Description
Part No.
3 oz. Aerosol, 24/cs
WD403
WD408
8 oz. Aerosol, 12/cs
WD4011
11 oz. Aerosol, 12/cs
WD4016
16 oz. Aerosol, 12/cs
WD40GAL
1 Gal. Refill WG94
WD405GAL
5 Gal. pail
Philadelphia, PA
610-647-8070
Superior thread cutting
lubricant for use on ferrous
and non-ferrous metals;
including brass, copper and
aluminum. Sulfur free, low
odor formula is compatible
with any manual or motor
driven thread cutting tool.
Clings tightly to vertical
surfaces. 16 oz. aerosol can.
12/case.
14050
CRC Screwloose
High strength insecticide
shoots over 20 feet, stinging
carouse insects on contact.
Contains no chlorinated
solvent, harmless to plastics.
High dielectric strength of
31,7000V. 20 oz. aerosal
can. 12/case
Industrial strength, low
viscosity lubricant and
penetrant designed to
quickly loosen and free
seized, bound or frozen
fasteners. Pure clear
formula contains no messy
dyes to clean-up. Eases
the disassembly of plant
machinery, tools and
equipment. 11 oz. aerosol
can. 12/case.
CRC 2-26 MultiPurpose Precision
Lubricant
Versatile, plastic safe, multipurpose precision lubricant,
penetrant and corrosion
inhibitor, Suitable for steel,
copper, brass and aluminum
alloys. Displaces moisture
and leaves a thin, long
lasting film to protect against
corrosion. 16 oz. aerosol
can. 12/case.
Part No.
Part No.
Part No.
14010
030360
02005
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Fasteners
CRC Cutting Oil
Part No.
14085
CRC Wasp &
Hornet Killer Plus
Pipe
Hangers
Part No.
Description
Part No.
TF20025 6 oz. pump bottle
TF20027 12 oz. aerosol
555
Tools
Environmentally safe.
Use as acid neutralizer,
deodorizer, non-abrasive
cleaner and laundry
additive. 16 oz. box
Abrasives
Part No.
DYK91930
OnSite
Supply
04650
Safety
Part No.
Rentals
Disinfectant and odor
neutralizer. Kills household
germs that cause odors on
surfaces. 12 oz. aerosal can.
12/case
Anchors
Lysol Disinfectant
Spray
Clean, polish, brighten
and protect all in one
step. This powerful
formula prevents water
marks and corrosion and
preserves the high luster
of stainless steel. They
are ideal for bathrooms,
drinking fountains,
elevators, kitchens and
more. 9.75" x 10.5"
towelette. 30/container.
6/case.
Strut
Tri-Flow Lubricant
Scrubs® Stainless Steel
Cleaner Towels
Threaded
Rod
Cleaners / Lubricants
Fasteners
Wipers / Rags / Paper Products
Rags In-A-Box
Cloth Rags
Ideal for painting,
wiping up spills,
staining and
refinishing work.
Soft, absorbent
towels perform
like cloth. Builtin handle allows
you to take the
box on the job
while keeping rags
clean. White. 200
- 13" x 10" rags
per box. 8 boxes
per case
Standard case: 50 lbs. Other sizes
available upon request.
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Description
Mixed Rags (#1 light weight)
Polo, Cotton (Colored)
100% White Cotton
Fleece (Sweatshirt)
White Flannel
Colored Flannel
White T-Shirt
New White Knit
Cheese Cloth
White Sheeting
New Bar Towels
Corduroy
Part No.
CPW400
CPW100
CPW250
CPW300
CPW160
CPW200
CPW850
CPW150
CPW325
CPW500
CPW090
CPW700
Household
Paper Towels
Tools
Jumbo paper towels.
2-ply. 30 rolls per case.
Sold per case only.
Part No.
75260
Scrubs® pre
moistened towels
get your hands
clean and leave
them conditioned
and protected
anywhere that
you are working.
12/case.
Part No.
DYK42272
Description
Rags In-A Box
Blue Shop Towels
Strong, absorbent towel
is ideal for changing oil,
refilling fluids and general
maintenance. Works when
wet. Available in rolls or popup box. Sold per case only.
Wypall® Plus Wipers
Ideal for routine industrial cleaning and
maintenance. Removes soils and liquids
from face and hands. One-at-a-time
dispensing. 16.4" x 9.8" 1-ply sheets. 100/
pop-up box. 9 box/case.
Part No.
05740
Part No.
75130
Description
Wypall Plus Wipers
75190
Description
Roll Shop Towels, 10.4" x
11" sheets, 55 per roll / 30
per case
Pop-Up Box Shop Towels,
11" x 13" sheets, 200 per
box / 8 box per case
Multi-Fold Towels
Abrasives
Natural brown
kraft paper or
white. Single ply.
9" x 9.45". 250
per pack. 16
packs per case.
Sold per case
only.
Description
2-ply White Paper towels
Part No.
SCT1482
Scrubs® Hand Cleaner Towels
Description
Part No.
088-6200 White Multi-fold towels
088-6202 Kraft Multi-foldr towels
OnSite
Supply
NonPerforated
Hardwound
Paper Towels
Bathroom Tissue
Safety
Natural brown kraft
paper. Primarily for hand
drying in washrooms. 8"
wide. 350' roll. 12 rolls
per case. Sold per case
only.
Soft, absorbent, 2-ply bathroom tissue.
Safe for sewer and septic systems. 500
sheets per roll. 96 rolls per case. Sold per
case only.
Description
Part No.
BWK6180 2-ply Bath Tissue, 96/case
Rentals
556
"Clean-Room" Tacky Mats
Part No.
ENC4861
Hartford, CT
800-969-0285
Description
Natural Brown Paper towels
Boston , MA
800-645-6155
Place outside rooms that must remain free
from dirt and other contaminants. Tacky
polyethylene film. 30 layers of tough film
are laminated together in a stack. Once
top film is dirty, simply pull off and throw
away. 30 sheets to a mat; 4 mats in a
package. 1/8" thick.
Part No.
P101W
P111W
Description
18" x 36" Tacky Mat
24" x 36" Tacky Mat
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Vacuum Cleaners — Heavy Duty
Positive water shut-off
• Protects motor from direct exposure to water.
Fasteners
Vacuum Cleaners - Wet/Dry SHOp
Heavy-duty filter system
49-90-1150
• For the roughest coarse materials to the finest dust
For use with Model 8950
only. (Order separately)
Use as a blower
• Switch hose from intake to exhaust, for cleaning inaccessible areas
Anchors
Vacuum Cleaner Dolly
For
Recov. Cap.
Materials gal bu
Tank
8950
8955
Wet/dry 8 7/8
Wet/dry 10 1-1/8
Volts
Amps Motor Type
Steel 120 AC, 60 Hz 8.0
Steel 120 AC, 60 Hz 8.0
Air Flow
cu ft/min.
1-Stage Bypass 143
1-Stage Bypass 143
Suction Overall Dimensions
in water Width
Height
45
45
16-3/4
19-1/2
22-1/2
38-1/2
Standard Equipment: For 8955 - 1-1/2” O.D. hose connections, cord with 3-prong grounded plug, 3 hold-down clamps, 7’ x 1-1/2”
I.D. vinyl hose, hose adapter, filter cartridge and 3 wheel dolly. For 8950 - 1-1/2” O.D. hose connections, cord with 3-prong grounded
plug, 3 hold-down clamps, 7’ x 1-1/2” I.D. vinyl hose, hose adapter and filter cartridge.
Vacuum Cleaners — Heavy Vacuum Cleaners — Poly Tanks
Pipe
Hangers
• Easily maneuverable
• High efficiency filtration system
• Durable polypropylene tank
• Handy tool caddy
• Ideal applications
Manufacturing plants, utility plants, schools, construction sites, service stations,
warehouses, shopping malls, hotels and many more.
Threaded
Rod
Part
No.
Strut
Vacuum motor design
• Centrifugal blower produces high efficient vacuum and air flow.
One-stage bypass motor for wet/dry operation.
8936-20 Exclusive features
• 3 Position switch-on/off/on demand
• Built-in sensor relay — activates vacuum when power is turned on
• 8 Amp outlet accepts 3 prong plug
• 12 Amp circuit breaker
8938-20 Exclusive features
For
Recov. Cap.
Materials gal bu
Tank
8936-20 Wet/dry 7-1/2 7/8
8938-20 Wet/dry 9 1
Poly
Poly
Volts
Amps Motor Type
120
120
9.5
7.4
1-Stage Bypass
2-Stage Bypass
Air Flow
cu ft/min.
Suction Overall Dimensions
in water Width
Height
159
102
59
84
14-5/8
16-1/8
20-3/4
33-1/2
Standard Equipment: For 8936-20 - 7’ x 1-1/2” hose, 1-1/2” conversion unit, dolly caster assembly, tool basket, cartridge filter and
filter bag. For 8938-20 - 7’ x 1-1/2” conversion unit, Vac dolly, tool basket, cartridge filter and filter bag.
Model
Cap.
HP
Filter
96887
WD1246
12 gallon
5.0
VF4000
18718
WD1450
14 gallon
6.0
VF5000
18723
WD1850
16 gallon
6.5
VF5000
15813
WD4050
4 gallon
5.0
VF3500
Wet and Dry Vacuums
OnSite
Supply
Part No.
Abrasives
Part
No.
Tools
• Rear drain plug
• 35’ Cord set
WD1245
Wet and Dry Vacuum Filters
Model No.
Description
72947
VF4000
Standard pleated paper filter
Standard Filter with WD1730
Part No.
Model No.
Description
72952
VF5000
High efficiency 2-stage filter
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
WD1450
Hartford, CT
800-969-0285
557
Rentals
Part No.
Safety
Standard Filter with WD1200 and WD1630
Fasteners
Sorbents
Anchors
Strut
Oil Absorbing Pillows
ALLWICK™ General SOC
Great for absorbing spills and leaking
fluids in tight spaces. Oil Only Pillows
feature a white spun bond outer
covering filled with white polypropylene,
are ideal for use in waste troughs,
coolant tanks, fluid reservoirs and sump
wells. For use with oil and petroleum
based fluids.
Tubular absorbent
sock filled
with cellulose
from recycled
newspaper, is
your best sock
value. Keeps
areas around
machines clean,
safe and dry from fluids, leaks and spills.
Packaged: 16 pillows per case, 19 lb
per case.
Part No.
Description
OIL1818
Oil-Only Pillows
Packaged 40 socks per case. 3” d x 48” l. Absorbs 1 gallon per
sock. 37 lb per case.
Threaded
Rod
Oil Only and MRO Pads 100 and 200
Pipe
Hangers
Tools
SPC100
SPC200
MRO100
Pads 100, Oil Only
Pads 200, Oil Only
Pads 100, MRO
AW412
ALLWICK™ General SOC
An oil absorbing, melt
down polypropylene roll.
Packaged 100 pads per bale; 3/8” t x 16” w x 20” l, absorbs 74
ounces per pad, or 200 pads per bale; 3/16” t x 16” w x 20” l,
absorbs 37 ounces per pad. Both styles weigh 19 lb per case.
Description
Description
Polypropylene Roll
Primarily used for
absorbing only petroleumbased fluids off land or
water. Use this pad when
you require the maximum
amount of absorption at
the fastest possible rate.
Two thicknesses available.
Part. No
Part No.
Use for absorbing
petroleum based leaks,
drips, spills or oversprays. Economical roll
form is easy to cut and
shape. 1 roll/bale; 3/8”T
x 30”W x 150’L, absorbs
116 gal/roll. 3/8 lb/roll.
Part. No.
Description
BRO150
Polypropylene Roll
Booms 810 and 410S
Drum Top Pads
Abrasives
Polypropylene pad absorbs
liquids that build up on drum tops
from leaking pumps or dispenser
cans. Pre-cut pads fit the drum
top perfectly.
Packaged 25 pads per bale. 22”
dia. circle. Absorbs 78 oz pad. 5
lb per case.
OnSite
Supply
Part No.
Description
DTO25
DTA25
Oil Only
ALLWICK™ for all liquids.
Safety
Not in the catalog?
Give us a call we are constantly
adding new items to our inventory.
Rentals
558
Hartford, CT
800-969-0285
This polypropylene boom is used to absorb/skim oil off bodies of
water. Booms link together easily for various lengths. Sock-net
covering, no shedding.
Boom 810 is packaged 4 per bale, 8” d x 10” l, Absorbs 32 gal
per boom. Boom 510S is packaged 4 per bale, 5” D x 10” L.
Absorbs 10.5 gallons per boom.
Part. No.
Description
SPC810
SPC510
Boom 810
Boom 510S
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Tsurumi
2" Submersible
Electric Pump
Tsurumi
F-13 Utility Pump
Anchors
Oil-free economical submersible pump for clean
surface water application. Built-in check valve.
Pump sands and debris with minimal
wear and clogging. Pump discharge
can be changed from 90° to 45°. Built
in sensor is great for tight places a
normal float won't work. Automatic
float switch available separately.
Features and benefits
Pumps solids up to 1-1/4" in diameter.
Air filled motor protected by 3 oil seals.
Built-in thermal motor protector.
Operated either manually or automatically.
Easy grip handle design
1-1/4" NPT discharge with garden hose adapter (3/4").
1 year warranty.
Strut
• Sensitive electrodes detect water
to start pump
• Urethane Semi-Vortex Impeller for
maximum durability.
• Double Inside Mechanical Seal with SIC faces provides the
longest operational life.
• Oil Lifter provides lubrication of the seal faces.
• V-Ring Seal Protector protects mechanical seal from abrasive
particles.
• Internal timer eliminates pump short cycling.
•
•
•
•
•
•
•
Specifications
Gallons Per Minute: 37 gpm
Outlet Size (in):
3/4" in.
1/4
Nominal HP:
Part No.
Description
F-13
Utility Pump
Voltage:
Cable Length:
Weight (lb):
115V
10 ft
6.6
Threaded
Rod
Features & Benefits
Specifications
Part No.
2"
2/3 hp
32
2
Weight (lbs)::
Height (in):
Diameter (in):
26
11
7-5/16
w/o Automatic Float
LB-480A
w/Automatic float
Gas Trash Pumps
Rugged and dependable, ideal for dewatering applications with high solid
content. Sticks, stones and debris easily
pass through the pump, minimizing
downtime due to clogging.
Description
LB-480
Tsurumi
Pipe
Hangers
Discharge Bore (in):
HP:
Cable Length (ft):
C.W.L (in):
Fasteners
PUMPS
Features and benefits
• Engine: Honda GX-120 gas
engine with oil sensor delivers
high power
• Durable TPE diaphragm and
check valves for extended wear life.
• Balanced wheel and handle assembly provide easy handling.
• Maximum head of 37 feet (11.3 meters)
• Automatic thermo-overload protection.
• Double mechanical oil-filled seal.
Specifications
TD4-200
Gallons Per Minute:
Outlet Size (in):
Max Solids (in):
Max Head (ft.):
Horsepower
Operating RPM:
Weight:
TD4-300
50 gpm
2 in.
1-1/4 in.
25 ft.
4.0 hp.
3,600 rpm
155 lbs.
Gallons per Minute:
Outlet Size (in):
Max Solids (in):
Max Head (ft.):
Horsepower
Operating RPM
Weight:
Part No.
Description
TD4-200
2" Diaphragm Pump
TD4-300
3" Diaphragm Pump
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
85 gpm
3 in.
1-1/4 in.
25 ft.
4.0 hp.
3,600 rpm
155 lbs.
Specifications
HONDA GX-160
Gallons Per Minute:
Outlet Size (in):
Max Solids (in):
Max Head (ft.):
Horsepower
Operating RPM:
Weight:
Part No.
190 gpm
2 in.
1 in.
90 ft.
5.5 hp.
3,600 rpm
96 lbs.
HONDA GX-240
Gallons per Minute:
Outlet Size (in):
Max Solids (in):
Max Head (ft.):
Horsepower
Operating RPM
Weight:
360 gpm
3 in.
1-1/2 in.
96 ft.
8.0 hp.
3,600 rpm
145 lbs.
Description
EPT3-50HA
Honda GX-160 2" Gas Trash Pump
EPT3-80HA
Honda GX-240 3" Gas Trash Pump
Boston , MA
800-645-6155
Abrasives
Capable of continuous dry operation for seepage de-watering.
OnSite
Supply
For Sand, Mud & Sludge
Hartford, CT
800-969-0285
Safety
2"/3" Diaphragm Pump
• Engine: Honda gas engines with oil sensor deliver high power
• Impeller, Volute Casing and Wear Plate: High Chrome impeller, Cast Iron volute casing plus Stainless Steel wear plate for
increased durability and decreased maintenance.
• Cage Frame: Durable Rolled-Steel frame protects pump/engine,
provides ease of handling or transport and safe operation.
• Rubber Cushion: Rubber Vibration Cushions mounted on cage
frame buffer stress and wear.
• Mechanical Seal: Silicon Carbide mechanical seal provides the
longest life in this class.
• Hose Coupling: Galvanized Steel hose couplings.
• Handle and Wheel Kit: For easy transportation, available for all
trash pumps as optional accessory.
559
Rentals
Tsurumi
Tools
Features and benefits:
Anchors
Strong, lightweight PVC
lay flat hose designed for
moderate water discharge.
Mildew, oil and grease
resistant. Rolls flat for
easy storage. Pin lug male
and female connectors.
Temperature range: -5° F
to 170° F. Available diameters from 3/4" through
16”, longer lengths to 300’ available, call for information.
Strut
Fasteners
Pump Accessories / Hoses
PVC Water
Discharge Hose
Mill Water
Discharge Hose
Scuff resistant durable
hose for pump discharge
and hydrant water service.
Jacket will not mildew or
decay. Rolls up flat for
easy storage. Black rubber
lining with white polyester woven jacket. Not
rated for fire protection.
Includes male and female
couplings.
Part No.
Size
Part No.
Size
HSE2X50DPVC
2" X 50'
HSE2X50DMILL
2" X 50'
HSE3X50DPVC
3" X 50'
HSE3X50DMILL
3" X 50'
Threaded
Rod
Water Suction
Hose
Pipe
Hangers
Tools
Our standard contractorsgrade PVC suction hose is
economical and durable.
Designed for pump suction
and light discharge and
available in a broad range
of sizes. Call for sizes not
listed. Suitable for some
light chemical solutions
consult customer service
for chemical resistance
chart. Our rubber hose
is designed for heavy duty water and liquid waste suction and is
designed for maximum service life. Not recommended for sand or
gravel suction. Can also be used as hard-wall discharge hose. 20’
lengths stock. Includes male/female pin lock couplings.
Part No.
Size
Material
HSE2X20SPVC
2" X 20'
PVC
HSE3X20SPVC
3" X 20'
PVC
3/8" Pressure
Washer Hose
Rated to 3000 psi
This 3/8” x 50' hose can handle
between 1000 and 3000 PSI.
Its rugged, wire braid construction and durable brass couplers
help resist wear and extend
product life.
Specifications
Max Pressure:
3,000 PSI
Size:
3/8"
Max Temp:
200° F
Length:
50 FT
Color:
Black
Bend Restrictors:
Yes (both ends)
Part No.
Size
HSE3X50PW
3/8" x 50’
Abrasives
HSE2X20SRUB
2" X 20'
Rubber
Steel Strainers
HSE3X20SRUB
3" X 20'
Rubber
Zinc Plated Steel; Round Hole
Global Type “A” Adapters
Part No.
Size
Cam & Groove Quick-Lock female NPT
x male adapter. A380 permanent mold
aluminum. Max PSI 250
RHS25
2" Round Hole
RHS35
3" Round Hole
OnSite
Supply
Part No.
Size
G200-A-AL
2”
G300-A-AL
3”
Safety
Global Type “B” Adapters Pin Lug
Cam & Groove Quick-Lock female couSpanner Wrench
pler x male NPT. A380 permanent mold
aluminum. BUNA Seal. Max PSI 250
Rentals
560
Single End
Rubber Washer
For 2" and 3" water hose
Part No.
Size
Part No.
Size
Part No.
Size
G200-B-AL
2”
SW20
#2
KRW25
2"
G300-B-AL
3”
SW30
#3
KRW35
3"
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Water Hoses / Accessories
• Withstands hot water
• High Burst Strength - 150 psi
• Heavy Duty Brass Couplings
Size
Part No.
HSE 34x50W
3/4” x 50’
Deluxe Jobsite Water Hose
•
•
•
•
Kink-Free
Handle Grip
All brass couplings
Abrasive resistant rubber vinyl jacket
Part No.
Size
14-05850
5/8” x 50’
14-58100
5/8” x 100’
Jobsite Water Hose
• Kink-Free
• All brass couplings
• Abrasive resistant rubber vinyl jacket
Part No.
Size
14-03450
3/4" x 50’
Threaded
Rod
Heavy Duty Black Rubber
Water Hose
Voltec Industries
Strut
Voltec Industries
Water Coolers
Ultratherm® foam insulation
for maximum cold retention.
FDA grade inner liner is
easy to clean, resists stains
and odors.
A lid keeper cord made of polyester with steel crimp reduces lid loss and is standard
on 5 and 10 gallon coolers. Heavy duty ABS handles have a backup plate for extra
strength. Spigot is recessed to reduce breakage. Available in 2, 3, 5, and 10 gallon
sizes. Optional cup dispenser and paper cone cups also available.
Fight Dehydration
on the Jobsite!
Order any Gatorade
or
Ice-O-Tonic drink
mixes from Nefco
Philadelphia, PA
610-647-8070
Part No.
Description
8AJ-0001
10 gallon Igloo
8AJ-0002
2 gallon Igloo
8AJ-0003
3 gallon Igloo
8AJ-0004
5 gallon Igloo
8AJ-0005
Plastic cup dispenser
8FL-0014
Paper cone cups
Washington D.C.
877-419-2755
Pistol Grip Water Nozzle
•
•
•
•
•
•
Clip locks any spray pattern
Easy squeeze on/off lever
Heavy duty all-zinc metallized body
Brass valve and adjusting nut
Stainless steel spring with lifetime packing
Rubber handle guard
Part No.
CSN75
Brass Twist
Nozzle
Part No.
Safety
Drip-proof
Spigot
The high visibility yellow
body and red lid contain
ultraviolet stabilizers to
prevent fading and cracking.
500AN4
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
561
Rentals
ABS
Handles
and
Backup
Plates
Abrasives
Pressure-fit, double-walled
lid has no grooves to trap
mold or mildew.
Lid Keeper
Cord
OnSite
Supply
High density polyethylene
exterior won’t chip, peel,
buckle or rust.
Tools
Pipe
Hangers
Industrial water coolers
keep water cold, clean and
available.
Fasteners
Fans
Industrial Air Circulator
Industrial Floor Fan
Anchors
UL Listed
Strut
F18H-TE
Shipped Un-Assembled and Packed in a single,
UPS-able Carton.
Specifications
Meets
OSHA Standard
Size
12 &18"
Motor
3-Speed, 1/8 hp.
Switch
Rotary
Cord
10' SJT Type 3
Blade
Steel Hub, Spider
Aluminum paddles
Guards
Chrome Plated Steel
Painted Gray.
Pole Stand Model
adjusts from 43"
to 60". 1- Year
Warranty.
F18-TE
Overall
Height
53”
Specifications
Meets OSHA
Standards
UL Listed
Size
24" & 30"
Motor
2-Speed, 1/4 hp.,
Totally Enclosed
Switch
Pull Chain
Cord
18' SJT Type 3
Blade
Steel Hub, Spider
Aluminum paddles
Guards
Chrome Plated Steel
Tilts 360°
Size
Mount Type
Part No.
Threaded
Rod
Pedestal
Model
Motor HP
CFM
Amps
18"
F-18-TE
1/8
2.2
18"
F-18H-TE
1/8
5750 - Hi
4700 - Med
3200 - Low
Pipe
Hangers
Size
24"
2.2
30"
Direct Drive Portable Blowers
Specifications
Tools
Size
36" & 42"
Motor
2-Speed (36"), 1/3 hp.,
1-Speed (42") 1/2 hp.,
Totally Enclosed
Switch
Rocker
Cord
15' SJT Type 3
Abrasives
Blade
3-Paddle, Steel
Guards
Spiral Wire, Front & Rear
CFM
Amps
Wt.
75
ACU-24-P
Wall Mount
ACU-24-W
I-Beam Mount
ACU-24-I
Ceiling Mount
ACU-24-C
Suspension Mount
ACU-24-S
Pedestal
6800
/
5000
45
50
2.5
45
43
ACU-30-P
78
Wall Mount
ACU-30-W
48
I-Beam Mount
ACU-30-I
Ceiling Mount
ACU-30-C
Suspension Mount
ACU-30-S
Optional Wheel Kit
HD-WK
7900
/
6000
53
2.7
48
46
Work Station Fan
• 3-Speed, Totally enclosed motor
• Mount with one bolt or lag screw to
walls, ceilings, work benches, machines
or any surface
• Fan head rotates 360° in both the
horizontal and vertical direction
Meets OSHA Standard UL Listed
Specifications
Meets OSHA Standard UL Listed
OnSite
Supply
Size
48"
Motor
1-Speed, 3/4 hp., Open,
Drip-Proof
Specifications:
Specifications:
Switch
Rocker
Size
Size
Cord
15' SJT Type 3
CFM
2750 / 2200 / 1600
CFM
5750 / 4700 / 3200
Blade
2-Paddle, Steel
Switch
Pull Chain
Switch
Pull Chain
Guards
Spiral Wire, Front & Rear
Size
Safety
36"
42"
48"
Rentals
562
Mount Type
Part No.
Standard
PB-36-D
Swivel
PBS-36-D
Standard
PB-42-D
Swivel
PBS-42-D
Standard
PB-48-D-OP
Swivel
PBS-48-D-OP
CFM
Amps
12,500 /
9,000
5.6
15,600
7.9
17,300
10.1
Hartford, CT
800-969-0285
12" - U-12_TE
18" - U-18-TE
Cord
10' SJT Type 3
Cord
10' SJT Type 3
Blade
Aluminum
Blade
Aluminum
Guards
Chrome Plated Steel
Guards
Chrome Plated Steel
Size
Model
Motor HP
Amps
12"
U-12-TE
1/12
2.1
18"
U-18-TE
1/8
2.2
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Polyethylene Tank Sprayers
Type I Safety Cans
UI-50-FS
12-1/2” x 13-1/2”
Eagle galvanized Type I cans meet OSHA and NFPA Code 30
requirements and are UL and ULC listed and FM approved for safe
handling and storage of gasoline and other flammable liquids.
Pipe
Hangers
Eagle cans feature environmentally friendly lead free technology,
constructed of 24-ga. hot dipped galvanized steel. Other
manufacturers’ safety cans use lead coated terne steel.
UL
Listed
UI-50-S 5 gal.
UI-20-FS 2 gal.
5 Gallon Plastic
Buckets
FM
Approved
White, 5 gallon, high-density
polyethylene buckets for multiple
uses. Lids sold separately.
INDLID
Lid
UI-10-S
1 gal.
UI-50-S 5 gallon
Round Metal Cans
Made of high quality tin plate. Typically called paint cans. Available in
sizes from 1 pint to gallon.
Part No.
Description
TCR008
8 oz.
TCR016
16 oz
TCR032
32 oz.
TCR128
128 oz.
Philadelphia, PA
610-647-8070
UI-2-S 1 qt.
UI-4-S 2 qt.
Baked on
Powder
Coat
Finish
Compliance: OSHA 29 CFR
1910.106, 1925.152 and
NFPA Code 30.
UI-20-FS 2 gal.
Capacity
Dimensions
W/O Funnel
W/ Funnel
5-1/4 x 8
6-3/4 x 8-3/4
9 x 8
11-1/4 x 9-1/2
12-1/2 x 13-1/2
UI-2-S
UI-4-S
UI-10-S
UI-20-S
UI-50-S
UI-10-FS
UI-20-FS
UI-50-FS
1
2
1
2
5
quart
quart
gallon
gallon
gallon
The above cans are available in blue for the storage of kerosene
and yellow for the storage of diesel. When ordering, add a “B” or
“Y” at the end of the model number. UL, ULC and FM approved.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
OnSite
Supply
5-gallon pail
Safety
MIS5GALPAIL
Abrasives
Description
563
Rentals
Part No.
Threaded
Rod
Strut
301P
Tank capacity (gallon)
Actual
3
Operating
2-1/2”
Extra-wide mouth - 3-1/4” •
Pressure relief safety valve •
Translucent tank
•
Non-corrosive polymer pump 10”
Discharge valve - polymer •
16”
Rotating wand - polymer
Adjustable nozzle - polymer •
Pump handle
•
•
Pack-display box
Convenient carrying strap •
Standard shipping pack
1
Tools
Part No.
Anchors
• Economical, for standard spraying applications
• Chemical resistant leakproof Viton seals
• Automatic/manual pressure relief valve with pressure indicator ring
• Extra-wide mouth for ease in filling and emptying tanks
• UV resistant translucent tanks for quick chemical level checks
• 33” premium PVC hose
Fasteners
COntainers / Safety Cans / Sprayers
Fasteners
Shovels
Anchors
Jackson® J-100 Series
Jackson® J-100 Series
Industrial Shovels
Long Handle
J-100 Series Industrial
Shovels
D-Handle
• Blades with onion skin finish for better
release
• Rolled back step
• 48" tapered, lacquered ash handle for more
control
• Blade Dimensions: 9 1/2" x 12"
Strut
Part No.
Desc
BMTLR
Round Point
BMTLS
Square Point
• Blades with onion skin finish for better
release
• Rolled back step
• 30" tapered, lacquered ash handle for
more control
• Poly D Grip for comfort
• Blade Dimensions: 9 1/2" x 12"
Part No.
Desc
BMTDR
Round Point
BMTDS
Square Point
Threaded
Rod
Pipe
Hangers
Jackson® Blue Max™ J-150 Series
Jackson® Blue Max™ J-150 Series
Long Handle Shovels
Contractor Grade
Long Handle Shovels
Contractor Grade
• Extra-thick 14 ga. steel blade (10" x 12") for
maximum toughness.
• Two rivets in the 11" socket keep handles
attached. Redistributes load to stronger steel
socket - not the handle.
• 48" long Northern Ash handles
• Forward turned step
• Extra-thick 14 Gauge Steel Blade (9-1/2"
x 12") For Maximum Toughness.
• Two rivets in the 11" socket keep handles
attached. Redistributes load to stronger
steel socket - not the handle.
• 30" long Northern Ash D-handles
• Forward turned step
Tools
Part No.
Desc
Part No.
Desc
BMDLR
Round Point
BMDDR
Round Point
BMDLS
Square Point
BMDDS
Square Point
Abrasives
Union Tools
Ames/True Temper
General Purpose Scoop
Poly Grain/Snow Scoop
• #2 Steel Blade (11.5” x 14.5”)
• 46” long Ash handles
Part No.
Desc
79805
General Purpose Scoop
• No. 12 poly blade, 14-1/4" x 17-3/4"
• 27" Ash handle with Cushion Poly D-Grip
• Molded ribs
OnSite
Supply
Part No.
Desc
1680000
Poly Grain/Snow Scoop
Ames/True Temper
Ceremonial Shovel
Safety
• Polished 9" x 11-1/2" Chrome Blade
• 27" Ash handle with Armor D-Handle
• Round Point
Rentals
564
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
Desc
1257800
Ceremonial Shovel
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Ames/True Temper
Post Hole Diggers
• Strong northern white ash handles with bolt-through construction for strength
Part No.
Head Width
Tines
Handle
1886300
16-3/4"
16
60"
Part No.
Blade Size
Point Spread
Handles
1706100
9-1/2" x 6-1/2"
6-1/4"
48"
TPHD
8" x 5-1/2"
5-1/2"
44"
Ames/True Temper
• One-piece forged head for maximum strength and durability
• Seal-coated white ash handle
Utility bars made from
heat-treated, high quality
carbon steel for years of
service.
• Specifications Dia x Ln:
1" x 69"
• Heat-Treated, High-Quality Carbon Steel
Part No.
Head Width
Tines
Handle
Part No.
Desc
1887200
16-5/8"
16
66"
1160000
Post Hole Digging Bar
Pipe
Hangers
Level Head Rake
Threaded
Rod
Post Hole
Digging Bar
w/ Tamper Top
Ames/True Temper
Fasteners
Strut
Garden Rake
• One-piece forged bow rake
• Seal-coated white ash handle for strength and durability
Ames/True Temper
Anchors
DigginG Tools / Rakes / Bars / Sledges
Ames/True Temper
Sledge Hammers
Double Milled Head
Part No.
Head Wt.
Handle Length
Handle Type
1196100
2 lbs.
16"
Hickory
1196500
3 lbs.
16"
Fiberglass
1196900
4 lbs.
16"
Hickory
1197900
8 lbs.
32/36"
Hickory
1199100
10 lbs.
32/36"
Hickory
1199700
16 lbs.
36"
Hickory
Desc
1160300
1" x 72" San Angelo Bar
OnSite
Supply
Ames/True Temper
Gooseneck
Wrecking Bars
Online Catalog • New Products
Submittals • Specials
Dia x Length
Part No.
Dia x Length
1/2" x 12"
1171000
3/4" x 30"
1169800
5/8" x 18"
1171600
3/4" x 36"
1170500
3/4" x 24"
1173000
1" x 48"
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
565
Rentals
www.GoNefco.com
Part No.
1169400
Safety
• Fully Painted
• For small wrecking jobs
• Claw on end removes nails
Be sure to visit
Washington D.C.
877-419-2755
Part No.
Abrasives
Utility bars made from
heat-treated, high quality
carbon steel for years of
service.
• Best for heavy pounding jobs
• Forged steel head for added
durability
• Hickory handle for strength
Philadelphia, PA
610-647-8070
Tools
Pencil Point San
Angelo Bar
Ames/True Temper
Fasteners
Wheel Barrows / Cement / Temporary Fencing
Big Wheel® Cart
Anchors
A smooth, seamless body with
comfortable molded-in, one-piece
handle. High density polyethylene body
resists rust, dents and corrosion and
most chemicals. 300 lb. load capacity.
Features 3/4” steel axle for heavy
duty hauling and moving. Brown cart
is available in 3.5 and 7.5 cubic foot
capacities.
J6
M6T22
Jackson® Contractor Wheelbarrows
Strut
Part No.
Head Wt.
5654
Big Wheel Cart - 3.5 cu. ft. capacity
5642
Big Wheel Cart - 7.5 cu. ft. capacity
• 6 cu. ft. capacity
• "H Brace, steel cross strips and leg shoes
• Shipped unassembled
• Glide-ring design on steel trays won’t catch shovels or hoes
• 16" wheel assembly with pneumatic 2-ply tire with oil-lube
bearings.
Description
Part No.
Threaded
Rod
Jackson®
Steel Mortar Mixing Pan
• 3 cu. ft. capacity
• 32" x 28" x 10"
• Stand sold separately.
J6
Contractor's Wheelbarrow
M6T22
Contractor's Wheelbarrow w/ leg stabilizers
M6FFB
Same as M6t22 w/ Flat Free (Solid) Tire
Flat-Free Solid Tire for Wheelbarrows
Pipe
Hangers
Part No.
Description
1MP
Mortar Mixing Pan
18MPS
Mortar Mixing Pan Stand
Part No.
Desc
FFTCC
Solid Wheelbarrow Tire
Sakrete Cements / Grout
Leak-Stopper Hydraulic Cement
Tools
A mixture of sand, cement
and special additives
designed to stop the flow
of water through breaks in
concrete and masonry.
Non-Shrink
Construction
Grout
High Strength
Concrete Mix
Abrasives
High strength concrete mix
for anchoring posts, poles,
and pouring footings and
slabs. Meets ASTM C 387
strength requirements for
structural applications.
• For applications requiring at least 2"
thickness
• Just add water.
A non-shrink, nonmetallic structural hydraulic cement for high
strength grouting of heavy machinery, steel
bearing plates, concrete columns, etc.
• Super-plasticized for improved strength.
• Can be made to a dry pack, plastic, or
flowable consistency for a variety of
applications.
• Just add water.
P/N 65250560 50 lb. bag, 30 bags/pallet
P/N 65200390 80 lb. bag, 42 bags/pallet
Temporary Fencing
• Instant setting hydraulic cement.
• Great for leaks in pools or stopping
other active leaks in concrete and
masonry.
• For all kinds of instant repairs to
concrete and masonry. No need for
forms or braces.
• Available in white.
• Just add water.
P/N 60200700 50 lb. pail, 56 pails/pallet
Silt Fence
for Erosion Control
Barrier Fence
OnSite
Supply
High Visibility
Lightweight, economical, durable and highly visible.
OSHA Orange for high visibility
UV Stable for long life
High strength polypropylene mesh
For erosion control in residential and commercial construction. Woven polypropylene yarns are
designed to block sediment while letting water flow
slowly through fabric. Proper installation keeps sediment from washing into streams and rivers. 3 ft. x
100 ft. roll. 11 pre-attached stakes per roll included.
Safety
Part No.
Desc
Part No.
Description
BFW4100GR
Barrier Fence, 4’ x 100’
SP11273611
Silt fence, 36” x 100’
Fence Posts (U-Posts)
Rentals
• Rolled design and tough green enamelled finish over
14 ga. steel.
• Punched every 6”, with spade.
• Height: 72”
566
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
Desc
UP72LD
6’ U-Posts
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Heavy-Duty
Multi-Guard
2GJ-0001
2GJ-0002
2GJ-0003
2GJ-0004
2GJ-0020
2GJ-0005
16”
24”
28”
32”
36”
36”
x
x
x
x
x
x
24”
32”
46”
39”
60”
72”
Ribbed bottom
Vac-cup bottom
Vac-cup bottom
Ribbed bottom
Vac-cup bottom
Smooth bottom
Part No.
Description
2GJ-0085
2GJ-0085-39
2GJ-0038
2GJ-0039
2GJ-0040
18”
18”
24”
36”
36”
x
x
x
x
x
24”
48”
36”
48”
60”
Strut
Description
• Excellent for wet or dry industrial
work areas
• 7/8” thick rubber mat provides
comfort underfoot
• Modules can be connected to
cover any size work area
• Color: Black
• Surface and drainage holes are
designed for safety and easy cleanup
• Optional beveled edging is available
mat
mat
mat
mat
mat
Threaded
Rod
Part No.
Anchors
Workmate
• Use at all outdoor entrances
• Thousands of scraping “fingers”
powerfully remove dirt from sight
• Mat holds pounds of dirt between
cleaning
• High quality, durable rubber
compound is approximately
5/8” thick
Fasteners
Material Handling
O.D.H.
Length
Carton
Qty.
5AB-0062
5AB-0063
5AB-0064
5AB-0065
5AB-0066
5AB-0067
5AB-0068
5AB-0069
2-3/4
4-1/8
4-1/8
6-5/8
6-5/8
8-3/8
8-3/8
6-5/8
4
4
4
4
4
4
4
4
11-5/8
11-5/8
17-5/8
11-5/8
17-7/8
11-5/8
17-7/8
23-5/8
24
24
12
12
12
12
12
6
Shelf Bin Dividers
Part No.
Description
5AB-0043
5AB-0044
5AB-0045
Bins 5AB-0063/0064
Bins 5AB-0065/0066/0069
Bins 5AB-0067/0068
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Tools
A large 8” x 14”, 10 gauge nose iron
plate with Super Slik™ raised runners
help slide the load on and off with
minimal effort.
Abrasives
Width
Fairbanks 500 lb capacity all steel
hand trucks are robotic welded for
greater consistency. A back lip on the
nose plate adds real strength, while
holding small loads in place.
Curved crossbars hold loads in place.
8” semi-pneumatic wheels with self
lube steel bearings make rolling easier.
Durable epoxy powder coated for a
longer lasting finish.
Load
Hgt.
Width lb
5AQ-0107
Double grip
handle
500 lb
46
14
20 8” x 13/4” / Semi
5AQ-0107
Double grip
handle
500 lb
46
14
20 8” x 13/4” / Semi
Part No.
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Wheels
Size/Pneumatic
567
OnSite
Supply
Part
No.
500 lb. Capacity
Safety
Optional dividers are available for all bins except
Model 5AB-0062.
All Steel
Hand Trucks
Rentals
Seamless, permanently bright
yellow molded polypropylene
bins fit 12”, 18” and 24” deep
shelving. Durable polypropylene
outlasts corrugated bins and
pay for themselves in reduced
replacement costs. One-piece
molded construction makes shelf
bins water-proof and unaffected by
grease or oil. The special built-in
hang lock catches the underside
of the shelf above the bin allowing
each bin to be tilted out for complete access. A convenient
front handle area contains a molded-in label holder. Edges
are reinforced.
Pipe
Hangers
Shelf Bins
Fasteners
Turnbuckles
Eye to Eye Turnbuckles
Thread Dia. Length
Anchors
Strut
Threaded
Rod
1/4-20
1/4-20
5/16-18
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
1-8
2-1/8
4
4-1/4
4-1/2
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
Eye Jaw to Eye Turnbuckles
Part No. Plain
HDG
25C212EET/LTD
25C400EET
31C425EET
-
37C600EET
50C600EET
50C900EET
50C1200EET
62C600EET
62C900EET
62C1200EET
75C600EET
75C900EET
75C1200EET
75C1800EET
87C1200EET
87C1800EET
100C600EET
100C1200EET
100C1800EET
25C400EETH
31C425EETH
31C450EETH
37C600EETH
50C600EETH
50C900EETH
50C1200EETH
62C600EETH
62C900EETH
62C1200EETH
75C600EETH
75C900EETH
75C1200EETH
75C1800EETH
87C1200EETH
87C1800EETH
100C600EETH
100C1200EETH
100C1800EETH
Thread Dia. Length
Hook to Eye Turnbuckles
Thread Dia. Length
Pipe
Hangers
Tools
Abrasives
1/4-20
1/4-20
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
4
6
4-1/4
6
6
9
12
6
9
12
6
9
12
18
12
18
12
18
1/4-2
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
4
4-1/4
6
6
9
12
6
9
12
9
12
18
12
18
12
18
HDG
25C400HET
25C600HET
31C425HET
37C600HET
50C600HET
50C900HET
50C1200HET
62C600HET
62C900HET
62C1200HET
75C600HET
75C900HET
75C1200HET
75C1800HET
87C1200HET
87C1800HET
100C1200HET
100C1800HET
25C400HETH
25C600HETH
31C425HETH
37C600HETH
50C600HETH
50C900HETH
50C1200HETH
62C600HETH
62C900HETH
62C1200HETH
75C600HETH
75C900HETH
75C1200HETH
75C1800HETH
87C1200HETH
87C1800HETH
100C1200HETH
100C1800HETH
1/4-20
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
4
4-1/4
6
6
9
12
6
9
12
9
12
18
12
18
12
18
Thread Dia. Length
OnSite
Supply
Safety
Rentals
1/4-20
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
568
4
4-1/4
6
6
9
12
6
9
12
9
12
18
12
18
12
18
Part No. Plain
HDG
25C400HHT
31C425HHT
37C600HHT
50C600HHT
50C900HHT
50C1200HHT
62C600HHT
62C900HHT
62C1200HHT
75C900HHT
75C1200HHT
75C1800HHT
87C1200HHT
87C1800HHT
100C1200HHT
100C1800HHT
25C400HHTH
31C425HHTH
37C600HHTH
50C600HHTH
50C900HHTH
50C1200HHTH
62C600HHTH
62C900HHTH
62C1200HHTH
75C900HHTH
75C1200HHTH
75C1800HHTH
87C1200HHTH
87C1800HHTH
100C1200HHTH
100C1800HHTH
Hartford, CT
800-969-0285
25C400JET
31C425JET
37C600JET
50C600JET
50C900JET
50C1200JET
62C600JET
62C900JET
62C1200JET
75C900JET
75C1200JET
75C1800JET
87C1200JET
87C1800JET
100C1200JET
100C1800JET
25C400JETH
31C425JETH
37C600JETH
50C600JETH
50C900JETH
50C1200JETH
62C600JETH
62C900JETH
62C1200JETH
75C900JETH
75C1200JETH
75C1800JETH
87C1200JETH
87C1800JETH
100C1200JETH
100C1800JETH
Part No. Plain
HDG
25C400JJT
31C425JJT
37C600JJT
50C600JJT
50C900JJT
50C1200JJT
62C600JJT
62C900JJT
62C1200JJT
75C900JJT
75C1200JJT
75C1800JJT
87C1200JJT
87C1800JJT
100C1200JJT
100C1800JJT
25C400JJTH
31C425JJTH
37C600JJTH
50C600JJTH
50C900JJTH
50C1200JJTH
62C600JJTH
62C900JJTH
62C1200JJTH
75C900JJTH
75C1200JJTH
75C1800JJTH
87C1200JJTH
87C1800JJTH
100C1200JJTH
100C1800JJTH
Stub End Turnbuckles
Thread Dia. Length
Hook to Hook Turnbuckles
HDG
Jaw to Jaw Turnbuckles
Thread Dia. Length
Part No. Plain
Part No. Plain
1/4-20
3/8-16
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3/4-10
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-8
1-1/8
1-1/4
1-1/2
Boston , MA
800-645-6155
4
6
6
9
12
6
9
12
9
12
18
12
18
12
18
6
6
6
Part No. Plain
25C400SET
37C600SET
50C600SET
50C900SET
50C1200SET
62C600SET
62C900SET
62C1200SET
75C900SET
75C1200SET
75C1800SET
87C1200SET
87C1800SET
100C1200SET
100C1800SET
112C600SET
125C600SET
150C600SET
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
3/4-10
7/8-9
1-8
1-1/8
1-1/4
1-1/2
1-3/4
2-4.5
75C1200TUB 75C1200TUBH
75C1800TUB 75C1800TUBH
87C600TUB 87C600TUBH
87C1200TUB 87C1200TUBH
87C1800TUB 87C1800TUBH
100C600TUB 100C600TUBH
100C1200TUB 100C1200TUBH
100C1800TUB 100C1800TUBH
112C600TUB 112C600TUBH
125C600TUB 125C600TUBH
150C600TUB 150C600TUBH
150C1200TUB 150C1200TUBH
175C600TUB 175C600TUBH
200C600TUB 200C600TUBH
12
18
6
12
18
6
12
18
6
6
6
12
6
6
Strut
37C600TUBS
-
50C600TUBS
62C600TUBS
75C600TUBS
-
25C400TUBH
-
37C600TUBH
50C300TUBH
50C600TUBH
50C900TUBH
50C1200TUBH
62C300TUBH
62C600TUBH
62C900TUBH
62C1200TUBH
75C300TUBH
75C600TUBH
75C900TUBH
Threaded
Rod
25C400TUB
31C425TUB
37C600TUB
50C300TUB
50C600TUB
50C900TUB
50C1200TUB
62C300TUB
62C600TUB
62C900TUB
62C1200TUB
75C300TUB
75C600TUB
75C900TUB
Eye-Bolts
Bent Eye Bolts
• Zinc Plated
• Supplied with Nut
Dia.
10-24
3/16-24
3/16-24
3/16-24
3/16-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
Forged Eye Bolts
• Zinc Plated
• Supplied without
Nut
OAL
Part No.
2-3/4
2-1/4
2-1/2
2-3/4
3
2
2-1/2
3
4
5
6
2-1/4
3-1/4
4
5
6
2-1/2
4
5
6
8
4
5
6
8
10
12
6
10C275BEBZ
18C225BEBZ
18C250BEBZ
18C275BEBZ
18C300BEBZ
25C200BEBZ
25C250BEBZ
25C300BEBZ
25C400BEBZ
25C500BEBZ
25C600BEBZ
31C225BEBZ
31C325BEBZ
31C400BEBZ
31C500BEBZ
31C600BEBZ
37C250BEBZ
37C400BEBZ
37C500BEBZ
37C600BEBZ
37C800BEBZ
50C400BEBZ
50C500BEBZ
50C600BEBZ
50C800BEBZ
50C1000BEBZ
50C1200BEBZ
62C600BEBZ
Dia.
1/4-20
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
1/2-13
• Plain or hot dip
galvanized
• Also available in stainless
steel and T316 stainless
steel
OAL
Part No.
Size
2
2-1/2
3
4
2-1/2
4
6
4
25C200BENZ
25C250BENZ
25C300BENZ
25C400BENZ
37C250BENZ
37C400BENZ
37C600BENZ
50C400BENZ
1/4 x 1-1/2 25C150FEB
1/4 x 2
25C200FEB
1/4 x 3
25C300FEB
1/4 x 4
25C400FEB
1/4 x 5
25C500FEB
1/4 x 6
25C600FEB
5/16 x 2-1/4 31C225FEB
5/16 x 3
31C300FEB
5/16 x 3-1/4 31C325FEB
5/16 x 4
31C400FEB
5/16 x 5
31C500FEB
5/16 x 6
31C600FEB
3/8 x 2-1/2 37C250FEB
3/8 x 3
37C300FEB
3/8 x 3-1/2 37C350FEB
3/8 x 4
37C400FEB
3/8 x 4-1/2 37C450FEB
3/8 x 5
37C500FEB
3/8 x 6
37C600FEB
3/8 x 8
37C800FEB
3/8 x 10
37C1000FEB
1/2 x 3-1/4 50C325FEB
1/2 x 4
50C400FEB
1/2 x 6
50C600FEB
1/2 x 7
50C800FEB
1/2 x 10
50C1000FEB
1/2 x 12
50C1200FEB
5/8 x 4
62C400FEB
5/8 x 5
62C500FEB
5/8 x 6
62C600FEB
5/8 x 7
62C800FEB
5/8 x 10
62C1000FEB
3/4 x 4-1/2 75C450FEB
Forged Clevises
Available plain,
painted, galvanized,
and stainless steel.
Trade Size
Tap Size
NEFCO No.
No. 2
No. 2.5
No. 3
3/8-16
1/2-13
5/8-11
5/8-11
3/4-10
7/8-9
3/4-10
1-8
1-1/4-7
200N37FOS
200N50FOS
200N62FOS
250N62FOS
250N75FOS
250N87FOS
300N75FOS
300N100FOS
300N125FOS
Not in the catalog? Give us a call - we are constantly adding new
items to our inventory.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Part No.
Pipe
Hangers
Bent Eye Bolts
HDG
25C150FEBH
25C200FEBH
25C300FEBH
25C400FEBH
25C500FEBH
25C6000FEBH
31C225FEBH
31C300FEBH
31C325FEBH
31C400FEBH
31C500FEBH
31C600FEBH
37C250FEBH
37C300FEBH
37C350FEBH
37C400FEBH
37C450FEBH
37C500FEBH
37C600FEBH
37C800FEBH
37C1000FEBH
50C325FEBH
50C400FEBH
50C600FEBH
50C800FEBH
50C1000FEBH
50C1200FEBH
62C400FEBH
62C500FEBH
62C600FEBH
62C800FEBH
62C1000FEBH
75C450FFEBH
569
Tools
3/4-10
Part No. Plain HDG
Abrasives
5/8-11
Thread Dia. Lgt.
OnSite
Supply
4
4-1/4
6
3
6
9
12
3
6
9
12
3
6
9
SS
Safety
1/4-20
5/16-18
3/8-16
1/2-13
Part No. Plain HDG
Rentals
Thread Dia. Lgt.
Anchors
Turnbuckle Bodies
Fasteners
Turnbuckles / Eye Bolts
Fasteners
Machinery Eye Bolts / U-Bolts
Machinery Eye Bolts
Anchors
Strut
Threaded
Rod
Size
Shank
Length
MEP
Plain No.
MES
Shoulder No.
Wt. per
100 Pcs
Rated
Capacity
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4-7
1-1/2-6
1-3/4-5
2-4-1/2
2-1/2-4
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
3-3/4
4
5
25C100MEP
31C112MEP
37C125MEP
43C137MEP
50C150MEP
56C175MEP
62C175MEP
75C200MEP
87C225MEP
100C250MEP
112C275MEP
125C300MEP
150C350MEP
175C375MEP
200C400MEP
250C500MEP
25D100MES
31D112MES
37D125MES
43D137MES
50D150MES
56D175MES
62D175MES
75D200MES
87D225MES
100D250MES
112D275MES
125D300MES
150D350MES
175D375MES
200D400MES
250D500MES
4.9
8.5
14.0
19.0
29.5
44.0
58.0
88.5
129.0
198.5
292.0
396.0
654.0
1050.0
1580.0
2900.0
500
900
1,300
1,800
2,400
3,200
4,000
5,000
7,000
9,000
12,000
15,000
21,000
28,000
38,000
56,000
Plain
Pattern
Shoulder
Pattern
Pipe
Hangers
U-Bolts
Standard U-Bolts
Tools
Material: Carbon Steel**
Finish: Zinc or Stainless
Service: Recommended for support - anchor or guide of heavy loads
Ordering: Specify pipe size - figure number and finish - furnish with four hex nuts each
Sizes: 1/2” - 1” can be supplied with 3/8” rod size for heavy duty use (specify “HD”)
Abrasives
OnSite
Supply
Safety
Pipe
Size
A
B
C
T
Wt./C
Approx.
Max. Rec.
Load,lb*
Part No.
Zinc
Part No.
Stainless
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
7/8
2-3/4
2-3/4
2-3/4
2-7/8
3
3-1/4
3-3/4
4
4-1/4
4-1/2
5
6-1/8
7-1/8
8-3/8
s9-5/8
1-3/16
1-3/8
1-5/8
2-1/16
2-3/8
2-13/16
3-7/16
4-1/16
4-9/16
5-1/16
6-1/8
7-3/8
9-3/8
11-5/8
13-3/4
2-3/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
3
3
3
3
3
3-3/4
3-3/4
4
4-1/4
11
12
12
28
30
33
73
78
84
90
101
197
233
491
773
485
485
485
1220
1220
1220
2260
2260
2260
2260
2260
3620
3620
5420
7540
50DUBOZ
75DUBOZ
100DUBOZ
125DUBOZ
150DUBOZ
200DUBOZ
250DUBOZ
300DUBOZ
350DUBOZ
400DUBOZ
500DUBOZ
600DUBOZ
800DUBOZ
1000DUBOZ
1200DUBOZ
50DUBOS
75DUBOS
100DUBOS
125DUBOS
150DUBOS
200DUBOS
250DUBOS
300DUBOS
350DUBOS
400DUBOS
500DUBOS
600DUBOS
800DUBOS
1000DUBOS
1200DUBOS
Light Duty U-Bolts Available on Request
* With a minimum safety factor of 5
** Also available in CAD plated - HDG - 316 S/S
Rentals
570
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
How to Order Wire Rope
Anchors
Perimeter Cable -
Deck Lashing
Example
150-ft
5/8”
6 x 19
IWRC
Improved plow steel
Right lang lay
Shovel hoist rope
6 x 7 - Regular Lay
6 x 19
This is a stiff rope,
highly resistant
to abrasive wear.
It is a standard
recommendation
for guys, stays, and rigging.
(6 x 25 Filler Wire)
6x15+7
This is the true
work horse rope
of the construction
equipment field. It
combines good flexibility and
strength with high resistance to
crushing and abrasion.
6x15+7 Fiber Core Lashing Wire Rope
Size Rope
Breaking Strength*
Approx Weight Per
Diameter
In Pounds
Foot In Pounds
1/2"
12,500
.32
5/8"
19,100
.45
3/4"
27,600
.61
Threaded
Rod
Item
Length of rope required
Diameter (maximum measure)
Construction
Core type
Type of material
Direction of type and lay
Type of equipment
Strut
Give complete information on your order to
prevent errors and avoid delays
* Listed for comparison only. Actual operating loads may
vary, but should never exceed recommended design factor
or 1/7 of catalog breaking strength.
Pipe
Hangers
Wire Rope
Fasteners
Wire Rope / Perimeter Cable
9.48
10.5
Philadelphia, PA
610-647-8070
Nominal
Dia. in
inches
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
Washington D.C.
877-419-2755
6 x 19 & 6 x 37
Classification
Extra
IPS
IPS
F/C
IWRC
IWRC
2.74
2.94
3.40
4.26
4.58
5.27
6.10
6.56
7.55
8.27
8.89
10.2
10.7
11.5
13.3
13.5
14.5
16.8
16.7
17.9
20.6
23.8
25.6
29.4
32.2
34.6
39.8
41.8
44.9
51.7
52.6
56.5
65.0
64.6
69.4
79.9
77.7
83.5
96.0
92.0
98.9
114.0
107.0
115.0
132.0
124.0
133.0
153.0
141.0
152.0
174.0
160.0
172.0
198.0
179.0
192.0
221.0
200.0
215.0
247.0
6 x 37 only
222.0
239.0
274.0
244.0
262.0
302.0
Boston , MA
800-645-6155
Spin Resistant Ropes
19 x 7 x IPS1
8 x 19 x IPS1
Nominal
Approx. Nominal Approx.
B/S
Wt./ft
B/S
Wt./ft
2.77
.113
4.30
.177
6.15
.250
8.33
.350
10.8
.450
11.7
.47
13.6
.580
14.7
.60
16.8
.710
18.1
.73
24.0
1.02
25.9
1.06
32.5
1.39
35.0
1.44
42.2
1.82
45.5
1.88
53.1
2.30
57.3
2.39
65.1
2.84
Abrasives
Nominal
Dia. in
mm
6.5
8.0
9.5
11.
13.
14.5
16.
19.
22.
26.
29.
32.
35.
38.
42.
45.
48.
51.
54.
57.
61.
64.
OnSite
Supply
Approx.
Weight
lb/ft
IWRC
.116
.l8
.26
.35
.46
.59
.72
1.04
1.42
1.85
2.34
2.89
3.50
4.16
4.88
5.67
6.50
7.39
8.35
9.36
10.4
11.6
Safety
Approx.
Weight
lb/ft
F/C
.105
.164
.236
.32
.42
.53
.66
.95
1.29
1.68
2.13
2.63
3.18
3.78
4.44
5.15
5.91
6.72
7.59
8.51
Hartford, CT
800-969-0285
571
Rentals
Tools
Nominal Breaking Strength
Black Strand Improved Plow Steel Wire Rope
Fasteners
Wire Rope and Accessories
PVC Coated
Anchors
Wire Rope 7 x 7 Stainless Steel
Size
3/64
1/16
Part No.
Size
Part No.
4DWIRS7x7
6DWIRS7x7
3/32
3/16
9DWIRS7x7
18DWIRS7x7
Strut
Wire Rope 7 x 7 hot dipped galvanized
Coated Dia.
Part No.
3/64
1/16
1/8
3/16
1/4
1/16
3/32
3/16
1/4
5/16
4D6WRPH/7X7
6D9WRPH/7X19
12D18WRPH/7X19
18D25WRPH/7X19
25D31WRPH/7X19
Wire Rope Sleeves Aluminum
Threaded
Rod
Pipe
Hangers
Size
Rope Dia.
7 x 7 Galvanized Cable
Approx.
Breaking
Weight per
Strength
1000 ft in lb
in lb
Part No.
1/16**
5/64**
3/32**
1/8
5/32
3/16
7/32**
1/4**
5/16**
3/8**
7.5
11.0
16.0
28.5
43.0
62.0
86.0
106.0
167.0
236.0
6DWIRH/7X7
7DWIRH/7X7
9DWIRH/7X7
12DWIRH/7X7
15DWIRH/7X7
18DWIRH/7X7
21DWIRH/7X7
25DWIRH/7X7
31DWIRH/7X7
37DWIRH/7X7
480
650
920
1,700
2,600
3,700
4,800
6,100
9,200
13,300
Wire Dia.
Description
1/16
3/32
1/8
5/32
3/16
1/4
5/16
3/8
Tools
Abrasives
Size
Rope Dia.
7 x 7 Galvanized Cable
Approx.
Breaking
Weight per
Strength
1000 ft in lb
in lb
Part No.
3/32
1/8
5/32
3/16
7/32**
1/4**
5/16**
3/8**
17.4
29
45
65
86
110
173
243
9DWIRH/7X19
12DWIRH/7X19
15DWIRH/7X19
18DWIRH/7X19
21DWIRH/7X19
25DWIRH/7X19
31DWIRH/7X19
37DWIRH/7X19
1,000
2,000
2,800
4,200
5,600
7,000
9,800
14,400
Wire Rope 7 x 19 Stainless Steel
OnSite
Supply
7 x 19 Stainless Steel - Type 304
Approx.
Breaking
Size
Weight per
Strength
Rope Dia. 1000 ft in lb
in lb
Part No.
Safety
1/16**
3/32**
1/8**
5/32**
3/16
7/32**
1/4**
5/16**
3/8**
7.5
17
29
45
65
86
110
173
243
500
920
1,760
2,400
3,700
5,000
6,400
9,000
12,000
Rentals
572
Hartford, CT
800-969-0285
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
Part No.
12DWRTH
18DWRTH
25DWRTH
31DWRTH
37DWRTH
50DWRTH
62DWRTH
75DWRTH
Wire Rope Thimbles
Heavy Duty Forged - Hot Dipped Galvanized
Description
1/4
3/8
1/2
3/4
7/8
Part No.
25DWRTH/HD
37DWRTH/HD
50DWRTH/HD
75DWRTH/HD
87DWRTH/HD
Wire Rope Thimbles
Stainless Steel
6DWIRS/7X19
9DWIRS/7X19
12DWIRS/7X19
15DWIRS/7X19
18DWIRS/7X19
21DWIRH/7X19
25DWIRS/7X19
31DWIRS/7X19
37DWIRS/7X19
**According to federal specifications RR-W-4100. Meeting
dimensional and strength requirements of Mil-W-83420D.
6DWRSA
9DWRSA
12DWRSA
15DWRSA
18DWRSA
25DWRSA
31DWRSA
37DWRSA
Wire Rope Thimbles
Hot Dipped Galvanized
Description
Wire Rope 7 x 19 Hot Dipped Galvanized
Part No.
Description
1/8
3/16
1/4
5/16
3/8
Part No.
12DWRTS
18DWRTS
25DWRTS
31DWRTS
37DWRTS
Not in the catalog? Give us a call - we are
constantly adding new items to our inventory
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Forged Wire Rope Clips Galvanized
Malleable Wire Rope Clips Galvanized
Size
Size
Malleable Wire Rope Clips
Stainless Steel
Size
Anchors
Part No.
6DMWRH
7DMWRH
9DMWRH
12DMWRH
18DMWRH
25DMWRH
31DMWRH
37DMWRH
43DMWRH
50DMWRH
56DMWRH
62DMWRH
75DMWRH
87DMWRH
100DMWRH
112DMWRH
125DMWRH
Strut
1/16
5/64
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
12DFWRH
18DFWRH
25DFWRH
31DFWRH
37DFWRH
50DFWRH
56DFWRH
62DFWRH
75DFWRH
87DFWRH
100DFWRH
112DFWRH
125DFWRH
150DFWRH
Threaded
Rod
Part No.
1/8
3/16
1/4
5/16
3/8
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
Fasteners
Wire Rope Accessories / Rope
Part No.
Pipe
Hangers
Tools
Twisted Polypropylene
Solving your application problems
and supplying the technical edge
are some of NEFCO’s value
added services saves you time
and money!
Twisted Manila
Natural manila rope is resistant to
sunlight, does not melt like synthetic
ropes and has little stretch. Provides
excellent knot holding ability and
is the strongest and highest quality
natural fiber rope.
Part Nos. 5HM-0049 to 0058 are put up on standard reels.
Size
5HM-0010
5HM-0011
5HM-0012
5HM-0013
5HM-0014
5HM-0015
5HM-0022
5HM-0021
5HM-0024
5HM-0025
5HM-0026
5HM-0027
5HM-0028
5HM-0029
1/4” x 50’
1250
1/4” x 100’ 1250
3/8” x 50’
2700
3/8” x 100’ 2700
4200
1/2” x 50’
1/2” x 100’ 4200
5/16” x 600’ 1900
1/4” x 600’ 1250
3/8” x 600’ 2700
3/8” x 1,200’ 2700
1/2” x 600’ 4200
1/2” x 1,200’ 4200
5/8” x 600’ 6200
3/4” x 600’ 8500
Philadelphia, PA
610-647-8070
Rope
Tensile lb
Washington D.C.
877-419-2755
Part No.
Size
Rope
Tensile lb
5HM-0005
5HM-0006
5HM-0068
5HM-0069
5HM-0070
5HM-0071
5HM-0049
5HM-0050
5HM-0052
5HM-0053
5HM-0054
5HM-0055
5HM-0056
5HM-0057
5HM-0058
1/4” x 50’
1/4” x 100’
3/8” x 50’
3/8” x 100’
1/2” x 50’
1/2” x 100’
1/4” x 600’
3/8” x 600’
1/2” x 600’
5/8” x 600’
3/4” x 600’
7/8” x 600’
1” x 600’
1-1/4” x 600’
1-1/2” x 600’
540
540
1215
1215
2385
2385
540
1215
2385
3960
4860
6930
8100
12150
16650
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Part No.
OnSite
Supply
Twisted yellow poly is a high strength,
lightweight rope. Resistant to rot, mildew,
petroleum products and most chemicals. High
strength polypropylene is an excellent all
purpose utility rope for home, farm, camping
and tie-downs. Floats on the water’s surface
and may be stored wet.
Abrasives
6DMWRS
7DMWRS
9DMWRS
12DMWRS
18DMWRS
25DMWRS
31DMWRS
37DMWRS
50DMWRS
573
Rentals
1/16
5/64
3/32
1/8
3/16
1/4
5/16
3/8
1/2
Fasteners
Chain and Accessories
Chain and Accessories
Anchors
Grade 30
Proof Coil Chain - Self Colored
Strut
A general utility chain for farm, industry
and home applications such as: pulling
stumps, log chain, cargo lashing, pipe
line hanging, tailgate, guard rail, tow and
switch chain.
Description
Threaded
Rod
3/16
1/4
5/16
3/8
1/2
5/8
Capacity
Part No.
800
1300
1900
2650
4500
6900
18DPCC
25DPCC
31DPCC
37DPCC
50DPCC
62DPCC
Grade 30
Proof Coil Chain - Zinc Plated
Description
Pipe
Hangers
3/16
1/4
5/16
3/8
1/2
Capacity
Part No.
800
1300
1900
2650
4500
18DPCCZ
25DPCCZ
31DPCCZ
37DPCCZ
50DPCCZ
Tools
Grade 30
Proof Coil Chain - Hot Dip
Galvanized
Description
1/4
5/16
3/8
1/2
Capacity
Part No.
1300
1900
2650
4500
25DPCCH
31DPCCH
37DPCCH
50DPCCH
Abrasives
Proof Coil Chain - Stainless Steel
Description
1/8
3/16
1/4
Capacity
Part No.
12DPCCS
18DPCCS
25DPCCS
OnSite
Supply
A light duty wire chain for uses such as
suspending flower pots, scales, children’s
toys, and electrical light fixtures.
Length
Grade 40 chain features both high
tensile strength and resistance to wear
needed by modern hauling and heavy
duty trucking, farm and construction
firms. Working load limits exceed those
of ordinary low carbon or general utility
chain.
Description
1/4
5/16
3/8
3/8*
7/16*
Capacity
Part No.
2600
3900
5400
5400
7200
25DHTC
31DHTC
37DHTC
37DHTCH
43DHTCH
Part No.
Tenso Chain
A general utility chain for hardware
and manufacturing applications such
as: playground and gym equipment,
fluorescent lights, boats, gates, porch
swings, halter, kennel, dog runner, cow
ties, and tie out chains.
Description Pkg. Size Part No.
No.1
No.3
1100
2000
1NTECZ/REEL
3NTECZ/REEL
Accoloy Grade 80 Chain
* Hot Dip Galv.
Grade 70 Transport Chain
Grade 70 is extremely strong for its light
weight and is used primarily for load
binding in the transportation industry.
However, it is also used extensively
on farms, in lumbering, towing, and
construction. Grade 70’s high strength to
weight ratio is achieved by special heat
treating. It resists wear because of its
exceptional hardness properties.
Capacity
Part No.
1/4"
Size
3150
25DTRC
5/16"
4700
31DTRC
3/8"
6600
37DTRC
1/2"
11300
50DTRC
SPAS Screw Pin Anchor
Shackles Grade 80
Single Jack Chain - Zinc Plated
Size
Grade 40 High Test Chain
Working Load Limit is embossed on each
piece. Forged Alloy steel shackles and alloy
pins for greater strength and abrasion
resistance. Heat treated and tempered.
Size
WLL
Part No.
3/8"
2500
ACC593500060
1/2"
5000
ACC593500080
Safety
5/8"
8000
ACC593500100
12000
ACC593500120
15000
ACC593500140
Rentals
No. 8
100 ft
8NSJCZ
3/4"
No. 10
100 ft
10NSJCZ/100FT
7/8"
No. 10
500 ft
10NSJCZ/500FT
1"
25000
ACC593500160
No. 12
100 ft
12NSJCZ/100FT
1-1/4"
36000
ACC593500200
No. 12
1000 ft
12NSJCZ/1000FT
1-1/2"
50000
ACC593500240
574
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Chain meets the latest guidelines of the
National Association of Chain Manufacturers
(NACM) for Grade 80 chain and ASTM A391/
A391M-93. Accoloy A8A chain has excellent
energy absorption properties. For fast
identification Accoloy chain is embossed A8A
on every link. Approved for overhead lifting.
Size
9/32
3/8
1/2
Part No.
WWL
511610402
511310602
511610802
3,500
7,100
12,100
Spas Screw Pin
Anchor Shackles
Working load limit is
embossed on each
piece.
Size
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
WLL - lb
HD Galv.
666
1000
1500
2000
3000
4000
6500
9500
13000
17000
19000
24000
27000
34000
18DASSH
25DASSH
31DASSH
37DASSH
43DASSH
50DASSH
62DASSH
75DASSH
87DASSH
100DASSH
112DASSH
125DASSH
137DASSH
150DASSH
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Size
1/4
5/16
3/8
Capacity
Part No.
4700
6600
11300
25DCGH/GR70
31DCGH/GR70
37DCGH/GR70
Load Binders
Clevis Grab Hooks Zinc Plated
These binders swivel 360 degrees at both
ends. The handles of the lever binders
toggle away from the load.
Description
Range
1/4
5/16
3/8
Capacity
Part No.
2600
3900
5400
25DCGHZ
31DCGHZ
37DCGHZ
1/4
5/16
3/8
1/2
Capacity
Part No.
2600
3900
5400
9200
25DCSH
31DCSH
37DCSH
50DCSH
Clevis Slip Hooks Zinc Plated
Description
1/4
5/16
3/8
Capacity
Part No.
2600
3900
5400
25DCSHZ
31DCSHZ
37DCSHZ
Double Clevis
Connector Zinc Plated
Description
5/16
3/8
Capacity
Part No.
4700
6600
31DDOCZ
37DDOCZ
Connecting
Links
Description
5/16
3/8
7/16
Capacity
Part No.
1950
2750
3625
31DCOL
37DCOL
43DCOL
Quick Links
Zinc Plated
Description
1/8
3/16
1/4
5/16
3/8
5/16-3/8 4700
3/8-1/2 6600
3/8-1/2* 6600
ACC441000320BX320
ACC441000400BX400
ACC441000410BXR410
* Ratchet Style
Clevis Slip
Hooks
Description
WLL-lb Part No.
Description
*Heat Treated - Used for trailer safety
chain assemblies and other applications
Machinery
Lifting Eyes
Description
Plain
Pattern
1/2-13 x 1-1/2 50C150MEP
9/16-12 x 1-1/4 56C175MEP
5/8-11 x 1-3/4 62C175MEP
3/4-10 x 2
75C200MEP
7/8-9 x 2-1/4 87C225MEP
1-8 x 2-1/2
100C250MEP
1-1/8-7 x 3
112C300MEP
1-1/4-7 x 3-1/2 125C350MEP
Shoulder
Pattern
1/4-20 x 1
25C100MEP
5/16-18 x 1-1/8 31C112MEP
3/8-16 x 1-1/4 37C125MEP
7/16-14 x 1-3/8 43C137MEP
Plain
Pattern
25C100MES
31C112MES
37C125MES
43C137MES
Shoulder
Pattern
50C150MES
56C175MES
62C175MES
75C200MES
87C225MES
100C250MES
112C300MES
Fasteners
125C350MES
Pushover® Load Binders
the
Acco High Strength Transportation Load Binders are of the
highest quality drop forged construction and meets DOT
requirements for truck tiedown use.These tough binders swivel
360° at both ends and the handles of the lever binders toggle
away from the load allowing easier release under all load
conditions. For all heavy duty interstate transport users.
The Bindex® Load Binder Line
Binder
No.
Chain
Size/Grade
Working
Load
Limit
lb*†
BX-320
BXR-310
BXR-410
5/16” Grade 70 4,700
3/8” Grade 40 5,400
5/16” Grade 70 4,700
3/8” Grade 40 5,400
3/8” Grade 70 6,600
1/2” Grade 40 9,200
Lever
Length
inches
Binder
Take
Up
inches
Wt.
ea.
lb
Pcs
per
Carton
Part
No.
16
4-1/2
7
5
4410-00320
15-3/4
8
9-1/2
5
4410-00310
15-3/4
8
11
5
4410-00410
Capacity
Part No.
Notes:
220
660
880
1760
2200
12DQULZ
18DQULZ
25DQULZ
31DQULZ
37DQULZ
(1) Working load limits are those of the maximum chain size and grade normally used
with the load binders.
(2) For safety reasons, extensions should not be added to load binder handles!
† The values for working loads shown here shall be used for calculating the number of
chain tiedown assemblies required to secure an article in compliance with Department
of Transportation Regulations 393,102(b).
Philadelphia, PA
610-647-8070
Anchors
25DCGH
31DCGH
37DCGH
43DCGH
50DCGH
62DCGH
Part No.
.135 x 1-5/16 ACC341520081
.162 x 1-3/8 ACC341520091
.148 x 1-3/4 ACC341520101
.105 x 1-1/8 ACC341520631
.375 x 3-1/4 ACC341520660
.312 x 2-5/8 ACC341520981
.250 x 2
ACC341521101
.120 x 1-1/2 ACC341524981
.250 x 2-1/4 ACC341525261
.375 x 2-3/4 ACC341529010
.406 x 2-3/4 ACC341529020
.468 x 3-3/8 ACC341529030
Threaded
Rod
2600
3900
5400
7200
9200
1300
Trade Size Description
No.8
No.9
No.10
No.63
No.66
No.98
No.110
No.498
No.526
No.901*
No.902*
No.903*
Tools
Part No.
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
575
Abrasives
1/4
5/16
3/8
7/16
1/2
5/8
WLL - lb
OnSite
Supply
Description
Designed for use with
Grade 70 transport chain
or Grade 40 Hi Test.
Safety
For use with grade 30
and 40 chain
“S” Hooks
Zinc Plated
Pipe
Hangers
Grade 70
Clevis Grab Hooks
Rentals
Clevis Grab
Hooks
Strut
Chain and Accessories
Fasteners
Chain Accessories / CM Pullers
Forged Rod Ends
Description
Anchors
Strut
Description
Part No.
1/4 x 2
5/16 x 4
3/8 x 4-1/2
3/8 x 6
1/2 x 3-3/4
1/2 x 3-1/2
1/2 x 4-13/16
1/2 x 6
1/2 x 12
25C200FRE
31C400FRE
37C450FRE
37C600FRE
50C375FRE
50C350FRE
50C481FRE
50C600FRE
50C1200FRE
Part No.
5/8 x 2
5/8 x 6
5/8 x 12
1/4 x 6
3/4 x 12
7/8 x 6
7/8 x 12
1-1/4 x 12
62C200FRE
63C600FRE
62C1200FRE
75C600FRE
75C120FRE
87C600FRE
87C1200FRE
125C1200FRE
CM Puller
Threaded
Rod
Optional shorter level 3/4 ton optional load sentry 1-1/2 ton 3 ton
6 ton optional anchor sling (3/4 and 1-1/2 ton) latchlok type hook
optional load limiter
Optional
Shorter
Lever
The CM Puller is designed for heavy-duty construction and industrial
applications.
Used to pull, lift, drag or stretch, it features:
Pipe
Hangers
Tools
Abrasives
• Tough aluminum alloy construction and powder coat finish
• Weatherproof for outdoor service
• Simple construction with fewer parts for ease of maintenance and
lower inventories
• Hoistaloy hardened steel link type load chain for strength, long wear
life and flexibility
• Weatherized Weston-type automatic braking system for positive
load control
• Easy, one-hand operation and control – only 58 pounds of pull
required for 3/4 ton model capacity
• Forged upper and lower hooks with latches standard
• Free wheeling for fast and easy attachment to load
• Upper and lower Latchlok hooks available for all capacities
• Optional Load Limiter protection device stops transmission of lever
forces protecting against dangerous overload
• Optional anchor sling simplifies attachment to allow anchor hook to
swivel in tight space applications (3/4 & 1-1/2 ton units only)
• Optional Load Sentry warns of overload condition
• Optional shorter lever for 3/4 and 1-1/2 ton units available
• Optional zinc-plated chain available
• Unlimited lift
• Lifetime warranty
• Metric rated
• Made in U.S.A.
3/4 ton
1-1/2 ton 3 ton 6 ton
OnSite
Supply
Latch Lock
Type Hok
Safety
Rated
Capacity
(tons)
3/4
1-1/2
3
6
Rentals
576
Optional
Load
Sentry
Optional
Anchor Sling
(3/4 and
1-1/2 ton)
Optional
Load Limiter
Product
Code
Standard
Lift†
(ft)
Puller Specifications - Standard Unit
Pull to
Minimum
Lift Full
Distance
Lever
Loads
Between
Length
(lb)
Hooks (in)
(in)
Reeving
Hook Approx.
Throat Ship.
Openings Weight
(in)
(lb)
4043
4045
4047
4050
5
5
5
5
58
89
95
96
1
1
2
4
1-1/32
1-1/8
1-7/32
1-3/4
Hartford, CT
800-969-0285
10-3/4
14-1/4
16-15/16
21-3/8
Boston , MA
800-645-6155
21-1/4
21-1/4
21-1/4
21-1/4
Washington D.C.
877-419-2755
16
26
38
73
Philadelphia, PA
610-647-8070
Part
No.
Standard
Lift†
(ft)
Specifications
Minimum
Distance
Overhauled
Between
To Lift Load
Reeving
Hooks (in) One Foot (ft)
Chain Pull to
Lift Full
Load (lb)
Ship.
Wt.
(lb)
1/4
1/2
1
1-1/2
2
3
4
5
6
8
10
4621
4622
4624
4625
4626
4627
4628
4629
4630
4631
4632
8
8
8
8
8
8
8
8
8
8
8
1
1
1
1
1
2
2
3
3
4
5
23
46
69
80
83
85
88
75
90
89
95
37
37
40
65
64
96
96
128
132
235
249
†Can be supplied with longer lifts.
CM Series 622 Hand
Chain Hoist
• Simple, efficient, economical design
• Equipped with hardened load chain for
flexibility and long wear
• Compact design, low headroom and lightweight
steel construction for easy installation, even in
confined spaces
• Weston-type load brake requires no lubrication
• Hand wheel cover with guide slots minimizes
jamming and slipping
• Swivel hooks with latches reduce twisting of
chain and unintentional unhooking of load when
chain is slack
• Standard hand chain drop is 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain
drop)
• One-year warranty Overhauled
• Metric rated
• Imported
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Anchors
Strut
3 and 4 ton
Capacity
Part
No.
Rated Standard
Capacity Lift
(tons) (ft)
Specifications
Chain Pull
Hand Chain
To Lift Rated Overhauled
Load
To Lift Load
(lb)
One Foot (ft)
Approx.
Shipping
Weight
(lb)
2202
2216
2208
2231
2263
2204
2217
2210
2262
2264
2206
2218
2213
2233
2272
2207
2230
2214
2209
2215
2234
2212
1/2
1/2
1/2
1/2
1/2
1
1
1
1
1
2
2
2
2
2
3
3
3
5
5
5
10
53
53
53
53
53
77
77
77
77
77
82
82
82
82
85
65
65
65
105
105
105
109
15
22
25
30
38
22
29
32
38
48
57
6
71
80
85
85
93
109
82
96
123
164
Boston , MA
800-645-6155
8
12
15
20
30
8
12
15
20
30
8
12
15
20
30
8
12
20
8
12
20
8
Hartford, CT
800-969-0285
29
29
29
29
29
37
37
37
37
37
80
80
80
80
80
154
154
154
147
147
147
289
577
Tools
22-1/2
22-1/2
30
40-1/2
52
81
104
156
156
208
260
Abrasives
12-7/8
12-7/8
14
17-5/16
17-5/16
21-1/2
21-1/2
24-1/4
25-1/4
34-1/2
35-1/2
Pipe
Hangers
Rated
Capacity
(tons)
Threaded
Rod
1/4 to
2 ton
Capacity
OnSite
Supply
• Most interchangeability of parts in the industry
• Standard Load Limiter for simple, automatic overload
protection
• Enclosed contoured Weston-type automatic brake for
positive load control
• High-efficiency spur gearing for greater lift with minimum
effort
• Rugged Hoistaloy chain for added strength and durability
• Fully machined, forged liftwheel pockets for easier lifting
and smooth free chaining
• High strength aluminum alloy castings in frame and covers
• Inspected over 75 times to meet or exceed HMI and ASME/
ANSI performance and safety standards
• Standard hand chain drop is 2 feet less than lift,
(example: 8 foot lift hoist has 6 foot hand chain
drop)
• Chain containers, zinc-plated load and hand
chain, aluminum unwelded hand chain, Latchlok
hooks, bronze hooks, eye-type suspension,
bullard hooks and units without Load Limiter
optional, depending on capacity
• Lifetime warranty
• Metric rated
• Made in U.S.A
Safety
One of the most popular and reliable
hoists ever designed, the cyclone combines superior
engineering, efficiency and durability. Available in a
variety of capacities from 1/4 ton to 10 tons, cyclone
features:
Rentals
Cyclone Hand Chain Hoist
Fasteners
CM Hoists
Fasteners
CM Hoists
Anchors
Lodestar Electric
Chain Hoist
CZ92 Universal Plate Clamps
• Clamps lift and turn over plates in one smooth operation
• Enables plates to be
turned over or lifted from
the horizontal to true
vertical position
• Available with standard
hook ring for direct
fitting onto crane hook
• Features hardened steel
jaws for positive grip and
locking mechanism
• Suitable for all structural steel up to 300 Brinell surface
hardness. For stainless steel or other materials, please contact
NEFCO
• Imported
The balanced, integrated, proven
design of the lodestar has made it the
most popular electric chain hoist in the
industry.
Lodestar gives you more value for your
money including:
Strut
Threaded
Rod
Pipe
Hangers
Tools
• Up to 3 ton capacities for heavy-duty
industrial applications
• Gear train lifetime lubricated with nonoxidizing grease
• Precision machined and hardened liftwheel
with hardened chain guides for precise chain
liftwheel fit
• Gearing designed for exceptionally long life
and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4)
• Hoist duty motor, standard Protector
overload device and standard screw type
limit switches
• Hardened, forged steel, latch type hooks and
Hoistaloy load chain for long, dependable
service
• Easy to install and maintain
• No special tools required to disassemble
• High reliability and long life
• Designed for greater productivity, efficiency
and economy
• Warranty
• Hoist thoroughly inspected and tested to
over 125% of rated load prior to shipment
• Meets ASME B30.16
• Rated
• Made in U.S.A.
Double
Reeved
Abrasives
OnSite
Supply
Safety
Rentals
578
Hartford, CT
800-969-0285
Jaw
Capacity
(in)
A
0-5/8
3-3/4
0-3/4
5
0-1-1/4 7-5/8
0-1-1/4 7-5/8
0-1-1/4 7-1/2
Dimensions (inches)
B
C
D
E
7-1/2 2
1-1/8 2
9-1/2 2
1-7/8 2-3/4
13-3/4 3-1/8 2-7/8 3-3/4
14
3-1/8 2-7/8 3-3/4
14-1/4 3-1/8 2-1/4 3-3/4
F
1-1/2
3-3/8
4-3/8
4-1/2
3-7/8
Note: 695232 supplied without lock lift only one at a time
CM Series 633 Wide Range Trolley
Simple, rugged, built for trouble-free service and ease
of operation across a wide range
of beam applications. Series 633
Features:
Triple
Reeved
Specifications - Two Speed
Stan-
Rated dard Lift
Product Code†
Capacity Lift Speed Motor
Less Suspension
(tons)
(ft) (F.P.M.) H.P. Model Reeving 230-3-60 460-3-60
1/8
10 10/32 1/4 A2
1
2707 2708
10 20/60 1/2 AA2 1
2717 2718
10 5/16
1/4 B2
1
2727 2728
1/4
10 10/32 1/2 C2
1
2737 2738
1/2
10 2.5/8 1/4 E2
2
2747 2748
10 5/16
1/2 F2
1
2757 2758
10 10/32 1
J2
1
3502 3503
10 21/64 2
JJ2 1
3549 3550
1
10 2.5/8 1/2 H2
2
2767 2768
10 5/16
1
L2
1
3504 3505
10 10/32 2
LL2 1
3553 3554
R2
2
3506 3507
2
10 2.5/8 1
10 5/16
2
RR2 2
3561 3562
3
10 1.75/5.5 1
RT2 3
9511
9513
10 3.5/11 2
RRT2 3
9512 9514
†Specify voltage 230 or 460
Working
Load
Limit Part
(lb)
No.
1,100 695232
3,300 695233
4,400 695234
6,600 695235
8,800 695236
• Rugged steel side plates formed to
include bumpers and trolley guards
• Frames connected by steel equalizer pin,
secured by two nuts on each side
• Universal tread flanged trackwheels equipped with shielded
ball bearings
• Easy rolling on American standard shapes, wide flange shapes
or patented rail
• Hardened wheels and axles for added strength and durability
• Spacer washers can be shifted inside or outside for easy
adjustment to wide range of beams
• To be used with hook suspended hoist
• Suspension plate for easy attachment is standard
• Bearings prepacked with lifetime lubricant
• One-year warranty • Imported
Rated
Capacity
(tons)
1/2
1
2
3
5
Boston , MA
800-645-6155
Part
No.
3302
3304
3306
3307
3309
Specifications
Adj. for Standard S-Beams
Depth
Flange
Tread
of Beam Width
Diameter
(in)
(in)
(in)
3-15
2-1/2-5-5/8 2-9/32
5-24
3-8
3-15/32
6-24
3-5/8-8
3-15/16
8-24
4-8
5-1/8
10-24
4-5/8-8
6-1/8
Washington D.C.
877-419-2755
Net
Weight
(lb)
15
34
50
95
172
Philadelphia, PA
610-647-8070
Size of Chain
mm
in
7
9/32
3/8
10
13
1/2
5/8
16
3/4
20
7/8
22
1
26
1-1/4
32
Single
Chain
lb
at 90º
3,500
7,100
12,000
18,100
28,300
34,200
47,700
72,300
How to Order
The following information should be given on
orders or inquiries for chain slings:
Sling Hook
Grab Hook
Sling Hook
Grab Hook
Sling Hook
Foundry Hook
Oblong Link
1. Size: this is specified by the size of the material
from which the chain is made, determined by
working load limit required.
2. Reach: this is the length, including attachments,
measured from bearing point to bearing point.
3. Type: select and specify proper type of sling
from list shown
Sling Hooks
Grab Hooks
Foundry Hooks
Fasteners
Examples: S-Single O-Oblong Link S-Ling Hook
4. Attachments: unless otherwise specified
standard master links and hooks as given herein
will be used. When other than standard master
links or hooks are required, we should be given
a complete description or a drawing of the
requested substitute.
Sling Hooks
Grab Hooks
Foundry Hooks
Sling Hooks
Grab Hooks
Foundry Hooks
When hot galvanizing is specified our
recommended working load limits must be
reduced
Double Chain Slings/lb
Type D
60º
45º
6,100
4,900
12,300
10,000
20,800
17,000
31,300
25,600
49,000
40,000
59,200
48,400
82,600
67,400
125,200
102,200
30º
3,500
7,100
12,000
18,100
28,300
34,200
47,700
72,300
Triple and Quad Sling/lb
Type T and Type Q
60º 60º
45º 45º
9,100
7,400
18,400
15,100
31,200
25,500
47,000
38,400
73,500
60,000
88,900
72,500
123,900
101,200
187,800
153,400
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Threaded
Rod
Single Chain Slings
SOS
Oblong Link
SOG
Oblong Link
SGS
Grab Hook
SGG
Grab Hook
SSS
Sling Hook
SOF
Oblong Link
SOO
Oblong Link
Double Chain Slings
DOS
Oblong Link
DOG
Oblong Link
DOF
Oblong Link
Triple Chain Slings
TOS
Oblong Link
TOG
Oblong Link
TOF
Oblong Link
m
QOS
Oblong Link
QOG
Oblong Link
QOF
Oblong Link
Opposite End
Pipe
Hangers
One End
30º 30º
5,200
10,600
18,000
27,100
42,400
51,300
71,500
108,400
Tools
Type
Anchors
Types of Chain Slings
Strut
Chain Slings
Abrasives
Important:
Working Load Limit should not be exceeded.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
579
Rentals
Safety
OnSite
Supply
To determine which chain size and leg style are
best suited to your requirements - use this working
load limit table as a guide. The table gives the
working load limits of 9/32” through 1-1/4” Accoloy
Chain in 1, 2, 3 and 4 leg styles. You know the
maximum load (or loads) you will lift and the angle
of lift involved - working to the left from these
loads and angles gives you the proper chain size for
your sling. Working Load Limits of the chain and
components is established as pounds applied at the
indicated degrees from horizontal.
Fasteners
Wire Rope Slings / Lug-all Hoists
Wire Rope and Slings
Anchors
Specifications - Single Leg Wire Rope Slings
Wire
Rope
Class
6 x 19
Threaded
Rod
How to order wire rope slings:
Pipe
Hangers
1. Determine the weight of the load.
2. Determine the type of hitch to be used.
3. Determine the type of sling to be used. (Will the sling have
eyes, hooks or thimbles?)
4. Length of the sling measured from pull to pull.
5. Wire rope construction if not standard 6 x 19 or 6 x 37.
6. Double check diameter, length and sling type with the WLL
(Working Load Limit).
Vertical
Choker
Basket
Min.
Sling
Length
1/4"
0.65
.048
1.3
1' 6"
5/16"
1
0.74
2
1' 9"
Single Leg Rated Capacity (Ton)
Rope
Diam.
3/8"
1.4
1.1
2.8
2' 0"
7/16"
1.9
1.4
3.8
2' 3"
1/2"
2.5
1.9
5
2' 6"
9/16"
3.2
2.4
6.4
2' 9"
5/8"
3.9
2.9
7.8
3' 0"
3/4"
5.6
4.1
11
3' 6"
7/8"
7.6
5.6
15
4' 0"
1"
9.8
7.2
19.6
4' 6"
1-1/8"
12
9.1
24
5' 0"
1-1/4"
15
11
30
5' 6"
1-3/8"
18
13
36
6' 0"
1-1/2"
21
16
42
7' 0"
6 x 37
Strut
Wire rope slings are strong, efficient and reliable accessories in
the material handling industry. Wire rope functions as an excellent
sling material in applications where a combination of strength and
abrasion are necessary. Wire rope slings are available in an array
of lengths and configurations to fit almost any application. StrenFlex® features wire rope slings made with high quality domestic
wire rope that are tagged with all appropriate ASME information
and capacities. Import wire rope slings are also available.
LugAll Portable Cable Winch Hoists
Tools
1. High-strength aluminum
Lift, Lower, Pull, Bend, Stretch, tighten at an angle, in any position
alloy frame.
(when used in accordance with accepted rigging practices)
2. Interlocking pawl system
3. All cable stores on drum Lightweight and portable, easy to carry and easy to rig. Unlimited applications in industry and
4. Reversible safety handle
construction. Safety features include a unique reversible handle that bends when the hoist is
5. Self-cleaning open
severely overloaded, and an interlocking pawl system that provides positive control.
construction
A variety of Lug-All models are available in four basic frame sizes. Options include rapid
6. Highly flexible 7 x 19
lowering for backing off 4 notches-per-stroke, and marine grade for highly corrosive conditions.
aircraft cable
7. Piled for-life bearings
8. Extra hook and pulley
All LugAlls are guaranteed for one year against defective parts and/or workmanship
9. Forged-steel safety
1/2 to 3-ton capacities • Cable lengths to 38 ft. • Lightweight from 7 lb.
hooks.
Abrasives
• marine grade
“A” Rig
Handle
Pull
For
Full
Lifting
• rapid lowering
“B” Rig
Handle
Handle
Pull
Min.
For
Min.
Distance
Full
Lifting Distance
“C” Rig
• choice of safety hooks
Pull
For
Min.
Full Lifting Distance
Total
Cap.
Load
Dist-
Between
Cap.
Load Dist- Between Cap.
Load Dist- Between Cable
Weight
Capacity Ton
Model No.’s
in lb
(lb)
ance
Hooks
in lb
(lb)
ance Hooks
(lb)
-
67
86
86
100
100
100
115
105
-
12-1/2’
7-1/2’
10’
5’
19’
15’
10’
7-1/2’
-
21
21
21
21
23-1/2
23-1/2
26-1/2
34
1000
750
1125
1125
1500
1125
1500
2000
3000
77
65
83
83
97
83
97
110
105
15’
25’
15’
20’
10’
38’
30’
20’
15’
Safety
ML Med.
Frame Frame
Small
Frame
OnSite
Supply
• cable return crank
1/2
3/4
1-1/8
1-1/2
1-1/8
1-1/2
2
3
100-15* or 115-R* -
1500-25 or 125-R 1500
2250-15 or 215-R 2250
2250-20
2250
3000-10 or 310-R 3000
2250-38 or 238-R 2250
3000-30 or 330-R 3000
4000-20 or 420-R 4000
6000-15
6000
in lb
16”
-
-
16”
750 67
16”
1125 86
16”
1125 86
16”
1500 100
18”
1125 86
18”
1500 100
18-1/2” 2000 115
26-1/2” 3000 105
ance
Hooks
Dia.
Length
(lb)
-
25’
15’
20’
10’
38’
30’
20’
15’
-
10”
10”
10”
10”
10”
10”
13”
17”
3/16”
5/32”
3/16”
3/16”
7/32”
3/16”
7/32”
1/4”
5/16”
16’
26’
16’
21’
11’6”
39’6”
31’6”
22’
18’
7
8-1/2
8-3/4
9-1/4
9
13-3/4
13-3/4
15-1/2
33
Rentals
Suffix “R” denotes rapid lowering units. * Without pulley block for marine grade (with stainless steel cable, anodized
castings and oiled-for-life bearings throughout) Add suffix “M” to Model No.
580
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Type 3/4 Heavy Duty Eye & Eye Sling (EE)
All purpose, low-profile heavy duty sling.
Available up to 12" with 1 to 4 plies.
Vertical, choker or basket configuration.
Gorilla-Guard® (high abrasion resistant) and Monster Edge®
(economical abrasion resistance, resists cutting and abrasion
on edges).
• Type 3 slings tapered at 3" standard.
Basket
60°
45°
30°
1,200
3,200
2,800
2,300
1,600
2
3,200
2,500
6,400
5,500
4,500
3,200
8"
1"
3
4,100
3,300
8,200
7,100
5,800
4,100
12"
1"
EEF-4-901
4
6,100
4,900
12,200
10,500
8,600
6,100
12"
1"
EEF-1-902
1
3,200
2,500
6,400
5,500
4,500
3,200
10"
2"
EEF-2-902
2
6,400
5,000
12,800
11,100
9,000
6,400
10"
2"
3
8,200
6,600
16,500
14,300
11,600
8,200
12"
2"
EEF-4-902
4
12,200
9,800
24,400
21,100
17,200
12,200
12"
2"
EEF-1-903
1
4,800
3,800
9,600
8,300
6,800
4,800
11"
1.5"
2
8,900
7,200
17,800
15,400
12,600
8,900
11"
1.5"
3
12,300
9,900
24,600
21,300
17,400
12,300
15"
1.5"
EEF-4-903
4
18,000
13,500
36,000
31,100
25,400
18,000
15"
1.5"
EEF-1-904
1
6,400
5,000
12,800
11,100
9,000
6,400
12"
2"
EEF-2-904
2
12,000
9,600
24,000
20,800
17,000
12,000
12"
2"
3
15,300
12,200
30,600
26,500
21,600
15,300
16"
2"
EEF-4-904
4
24,000
18,000
48,000
41,500
33,900
24,000
16"
2"
EEF-1-905
1
8,000
6,400
16,000
13,800
11,300
8,000
14"
1.75"
2
14,250
11,400
28,500
24,600
20,100
14,250
14"
1.75"
3
22,500
18,000
45,000
38,900
31,800
22,500
18"
2.5"
EEF-4-905
4
30,000
22,500
60,000
51,900
42,400
30,000
18"
2.5"
EEF-1-906
1
9,600
7,600
19,200
16,600
13,600
9,600
16"
2"
EEF-2-906
2
18,000
14,500
36,000
31,100
25,400
18,000
16"
2"
EEF-2-901
EEF-3-901
EEF-3-902
EEF-2-903
EEF-3-903
EEF-3-904
EEF-2-905
EEF-3-905
1"
2"
3"
4"
5"
6"
3
23,000
18,400
46,000
39,800
32,500
23,000
18"
3"
EEF-4-906
4
36,000
24,000
72,000
62,300
50,900
36,000
18"
3"
EEF-1-908
1
12,800
10,000
25,600
22,200
18,100
12,800
20"
3"
2
22,800
18,000
45,600
39,500
32,200
22,800
20"
3"
3
34,000
27,200
68,000
58,900
48,000
34,000
24"
4"
EEF-4-908
4
45,000
36,000
90,000
77,900
63,600
45,000
24"
4"
EEF-1-910
1
16,000
12,800
32,000
27,700
22,600
16,000
24"
3.5"
EEF-2-910
2
28,000
22,500
56,000
48,500
39,500
28,000
24"
3.5"
EEF-3-906
EEF-2-908
EEF-3-908
8"
10"
3
36,000
28,500
72,000
62,300
50,900
36,000
24"
5"
EEF-4-910
4
55,000
44,000
110,000
95,200
77,700
55,000
24"
5"
EEF-1-912
1
19,200
15,400
38,400
33,200
27,100
19,200
24"
4"
2
33,600
26,750
67,200
58,200
47,500
33,600
24"
4"
3
46,000
36,500
92,000
79,600
65,000
46,000
26"
6"
4
66,000
52,800
132,000
114,300
93,300
66,000
32"
6"
EEF-3-910
EEF-2-912
EEF-3-912
EEF-4-912
Philadelphia, PA
610-647-8070
12"
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
581
Strut
1"
Choker
1,600
Threaded
Rod
8"
Vertical
1
EEF-1-901
Pipe
Hangers
Eye
Width
Tools
Eye
Length
Abrasives
Basket Leg Angle
Rigging Technique
OnSite
Supply
Ply
Safety
Rated Capacity in Pounds
Rentals
Part No.
Web
Width
Anchors
•
•
•
•
Fasteners
Nylon Slings
Fasteners
Nylon Slings
Endless Roundslings (ERS)
Anchors
•
•
•
•
•
•
Strut
Less rigging weight
Easy handling
Color-coded capacity indication
Red core warning fibers
Models up to and including size 7 feature polyester core yarns and covers
Roundslings following and including size 8 feature Cordura nylon covers for
increased abrasion resistance
• Saves money by extending the life of the body of the sling
• Double-wall cover under the body cover to protect load bearing yarns
Capacity (Pounds)
Part No.
Color Code
Threaded
Rod
Vertical
Choker
Vertical
Basket
Minimum
Length (ft.)
Weight per
foot
Approx.
Diameter
(Relaxed)
Approx.
Width @
Load
Pipe
Hangers
ERS1
Purple
2,600
2,100
5,200
3.0
0.3
0.62"
1.12"
ERS2
Green
5,300
4,200
10,600
3.0
0.4
0.87"
1.50"
ERS3
Yellow
8,400
6,700
16,800
3.0
0.5
1.12"
1.87"
ERS4
Tan
10,600
8,500
21,200
3.0
0.6
1.12"
2.12"
ERS5
Red
13,200
10,600
26,400
3.0
0.8
1.37"
2.25"
ERS6
White
16,800
13,400
33,600
4.0
0.9
1.37"
2.50"
ERS7
Blue
21,200
17,000
42,400
4.0
1.2
1.75"
3.00"
ERS8
Orange
25,000
20,000
50,000
6.0
1.4
1.75"
3.30"
Tools
ERS9
Gray
31,000
24,800
62,000
6.0
1.7
2.25"
3.75"
ERS10
Maroon
40,000
32,000
80,000
6.0
2.1
2.50"
4.20'
ERS11
Brown
53,000
42,400
106,000
8.0
2.6
2.75"
4.62"
ERS12
Olive
66,000
52,800
132,000
8.0
3.2
3.12"
5.25"
ERS13
Black
90,000
72,000
180,000
8.0
4.1
3.62"
6.00"
End Fittings
Abrasives
Flat Hook (FH)
Heavy Duty Ratchet
Tie Downs
• 2", 3" & 4" wide heavy duty
webbing
• Available colors: (Yellow (2"-4")
and black (2" only).
Snap Hook (SH)
Wire Hook (WH)
Flat Hook (FH)
OnSite
Supply
D-Ring (DR)
Chain & Grab Hk (CG)
Safety
Flat Hook (FH)
D-Ring (DR)
Chain & Grab Hk (CG)
Rentals
582
Hartford, CT
800-969-0285
Part No.
Width
Length
Working Load Limit
RTD1027PFH
2”
27’
3,335 lbs.
RTD1030PFH
2”
30’
3,335 lbs.
RTD1027PSH
2”
27’
3,335 lbs.
RTD1030PSH
2”
30’
3,335 lbs.
RTD1027PWH
2”
27’
3,335 lbs.
RTD1030PWH
2”
30’
3,335 lbs.
RTD1527PFH
3”
27’
5,000 lbs.
RTD1530PFH
3”
30’
5,000 lbs.
RTD1527PDR
3”
27’
5,000 lbs.
RTD1530PDR
3”
30’
5,000 lbs.
RTD1527PCG
3”
27’
5,000 lbs.
RTD1530PCG
3”
30’
5,000 lbs.
RTD2027PFH
4”
27’
5,000 lbs.
RTD2030PFH
4”
30’
5,000 lbs.
RTD2027PDR
4”
27’
5,000 lbs.
RTD2030PDR
4”
30’
5,000 lbs.
RTD2027PCG
4”
27’
5,000 lbs.
RTD2030PCG
4”
30’
5,000 lbs.
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
CLS Series Accessories:
What’s Included:
•
•
•
•
•
•
•
One CLS Series Professional Two-Way radio
Rechargeable Lithium Ion Battery
3-hr Drop-in Desktop Battery Charger
Swivel Carry Holster
User Manual
Quick Reference Guide
One Year Limited Warranty
Anchors
RDU4100 Additional Features
RDX Series Business Two-Way Radio
• Range up to 350,000 sq. ft. or 30
floors indoors
• 4-watts of power
• 10 pre-programmed channels to
communicate with separate work
groups
• Custom programmable to match other
business band radios
The RDX series audio is 30% louder than previous XTX and
AX series radios. Manufactured with a die cast metal chassis
for increased durability; designed to meet tough Mil Spec 810
C,D,E,F and IP54/55 standard for shock, rain, humidity, salt, fog
sand/dust, high and low temperature. RDX Series is compatible
with the CLS, XTN and AX series and other radios operating
on the same frequency and code. This durable two-way radio
is ideally suited for construction, electrical, manufacturing/
warehousing, property management, and many other industries.
RDU4160d Additional Features
• Range up to 350,000 sq. ft. or 30
floors indoors
• 4-watts of power
• 16 pre-programmed channels to
communicate with separate work
groups
RDU4100
• Custom programmable to match other
business band radios
• Repeater capability
• Front panel programming buttons with Manager lock
RDX Series Features (RDU2020)
RDU4160d
RDX Series Talk Time Features:
• Li-ion Rechargeable Battery Life - Up to 12 hours per charge
with standard battery and up to 26 hours with higher capacity
batteries. AA Battery Life - Up to 26 hours
What’s Included:
RDX Series two-way radio RDU2020
1100 mAh Li-ion Rechargeable Battery
10-Hour Plug-In Charger
Spring loaded belt clip
Antenna
User’s Guide
Accessory Brochure
Warranty Card
• 8 channel operation.
• Backlit LCD display featuring channel, frequency,
code, signal strength, battery status and other
programming features.
• Front panel programming buttons with Manager lock
RDX Series Accessories:
• Remote speaker microphone – 53862
• Temple Transducer Headset with In-line Push-to-Talk (PTT)
Microphone – RMN5114
• Radio to Radio Cloning Cable – RLN6303
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Strut
RDU2080d Additional Features
Safety
•
•
•
•
•
•
•
•
• Range up to 250,000 sq. ft. or 20 floors indoors
• 2-watts of power
• 2 channel operation / 89 UHF business-exclusive
frequencies and 121 interference eliminator codes.
• Exceptional Audio Quality - 2000 mW of audio
output, speaker magnetic field reduction, windnoise reduction and improved RF specifications
• 3 Voice Scramble settings reduces eavesdropping
• Cloning compatible - Requires optional multi-unit
charger or cloning cable.
• VOX - Hands-Free use with audio accessory
• 3 different Call Tones
• 2 pin accessory plug (compatible with CLS, XTN & AX series)
• AA Battery Compatible (requires alkaline battery
frame accessory)
• Height: 4.5” H x 2.2” W x 1.6” D
• Weight: 8.6 ounces (with standard battery)
Threaded
Rod
• Battery Life - Up to 12 hours
• Up to 5 miles outdoors, 200,000 sq. ft.
indoors or 15 floors indoors
• 56 UHF business-exclusive frequencies
• 1watt technology
• One channel operation / 121 Interference
Eliminator Codes (38 analog, 83 digital)
• 3 Call Tones
• Cloning capable (requires optional multi-unit charger)
• 2 pin accessory connection (compatible with XTN and M-Series
Radios audio accessories)
• AAA Battery Compatible (requires optional accessory)
• Requires FCC License
• Height: 4.1” H x 2. 0 “ W x 1. 1 “ D (with antenna)
• Weight: 4.5 ounces
Pipe
Hangers
CLS 1110 / 1460 Talk Time Features:
CLS 1110 / 1460 Features
Tools
• Four channel operation / 121 Interference Eliminator Codes (38
analog, 83 digital)
• Channel scan feature to monitor frequencies and codes for activity
• VibraCall Alert
Business communications made simple! The CLS radio is
ideally suited for retail stores, restaurants, schools,
hospitality, event coordination, small businesses
and more. No monthly fees or service contracts
required.
Abrasives
CLS 1460 Additional Features
CLS Series Business Two-Way Radio
OnSite
Supply
Swivel Earpiece – RLN6423
Lightweight Headset with Boom Microphone – 53815
Earpiece with Inline Push-to-Talk Microphone – 56517
Earpiece with Boom Microphone – 56518
Rechargeable Lithium Ion Battery – 56557
Alkaline Battery Tray – 1564200W18
Multi-unit Charger – 56531
• CPS USB Programming Cable – RKN4155
• Ultra High Capacity Lithium-Ion Battery – RLN6308
• Multi-Unit Charger – RLN6309
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
583
Rentals
•
•
•
•
•
•
•
Fasteners
TWO-WAY RADIOS
Fasteners
Two-Way Radios
Anchors
DTR410 DIGITAL Business Two-Way
Radio
DTR410 Features
The digital advantage offers unique one-to-one calling capability
or group communication..
Strut
Threaded
Rod
• 900 MHz ISM license-free band
• Digital one-to many group call
• Frequency hopping spread spectrum (FHSS)
• Public-group calling - up to 5 public groups
• Battery gauge
• Lithium ion battery - up to 14.5 hours of operation
• 3-hours desktop charger included
• Public group call name aliasing (via optional Mini Keyboard)
• Rugged, compact polycarbonate housing with rubber overmold
for comfort - 5.27”H x 2.3 “W x 1.4”D
• Meets military 810 C, D, E, and F specifications for shock,
vibration, water, dust and temperature extremes
• 2-pin audio accessory jack with captive connector cover
• Connector programming interface with captive connector cover
• Full-graphic backlit display, contrast adjustment and backlight timer
• Daily alarm
• Caller ID
• Recent call list - last 20 transmissions
• Up to 5 group contact list
• Unit-to-unit configuration cloning (via optional Cloning cable)
• Coverage of up to 300,000 sq. ft. or 25 floors
• * Default Programming - 5 Public Groups
• * Weight with Li-lon Battery - 7.1 oz
• * Average Battery Life - 14.5 hrs
Pipe
Hangers
DTR410 Accessories:
Tools
• Earpiece with microphone – 53863
• Lightweight Headset with Boom Microphone – 53815
• Earbud with Clip Microphone and Push-to-Talk – 56517
• Headset with Swivel Boom Microphone – 53865
• Swivel Earpiece – RLN6423A
• Earpiece with In-Line Push-to-Talk (PTT) Microphone - 56517
• DTR Series Holster - 53961
• Mini-Keyboard - 53967
• 1 Hr. Rapid Charger - 53969
• 3 hr. Standard Charger - NNTN4641A
• Cloning Cable - 53968
• Rechargeable Lithium Ion Battery – 53963
• Replacement Drop-In charging Tray – 53962
• Multi-unit Charger – 53960
Abrasives
OnSite
Supply
Safety
Rentals
584
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Hold It. . . Lift It . . . Join It . . . Pin It . . .
Anchors
Get the parts you need,
• Chuck Jaws
• Clamping Devices
• Drill Jig Bushings
• Alignment Pins
• Modular Fixtures
• Handles & Knobs
• Swivel Hoist Rings
Strut
They're all available at NEFCO!
• Tooling Components
Fasteners
Carr LAne Storage Bins
• Toggle Clamps
Parts Storage Systems
Compartment Boxes
Part No.
No. of Compartments Width
Height
Depth
DUR 115
DUR 113
DUR 102
12
16
24
3
3
3
12
12
12
18
18
18
Tools
Manufactured of prime cold rolled steel and finished in rust and acid resistant
baked enamel. High impact plastic inserts. Inserts have rounded scoops, making it
easy to remove small parts. Covers are designed to stay open making it easy to
access parts and read cover labels.
Boxes have handles with pull-down catches.
Pipe
Hangers
Threaded
Rod
Tooling was never so easy!
Racks for Compartment Boxes
Width
Height
Depth
2
4
Base only
20
20
20-3/8
8-1/8
15
15-1/8
15-3/4
15-3/4
16
OnSite
Supply
No. of Drawers
DUR 302
DUR 303
DUR 304
Other Durham Products
Part No.
Description
Part No.
No. of Drawers
DUR 359
DUR 363
40 Hole
72 Hole
DUR 014
30
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
Here are some other products available from Durham
Call NEFCO today for your free copy of the
Durham catalog
585
Rentals
Part No.
Abrasives
These racks will accept Durham Compartment Boxes.
Fasteners
Vices
F-Series Vises
Anchors
The F-Series Vises are constructed of 75,000 PSI tensile strength forged steel.
These sleek, rugged vises out perform their bulky cast-iron competition.
Ridgid F-Series Vises feature a patented parallel jaw
alignment system. This exclusive feature gives the F-Series
safe, precise clamping action as well as longer service life.
F-Series also features:
Strut
Threaded
Rod
• All steel, drop forged
construction
• Rolled double lead acme
screw
• Steel handle with rubber
anti-pinch rings
• Increased work areas
• Standard fixed pipe jaws
• Large, hardened anvil
• Surface hardened slides foe
smooth, precise operation
• Forged steel swivel base with dual draw down bolts
• Ridgid Lifetime Warranty
Part
No.
Model
No.
Description
Weight
lb
Kg
66987
66992
66997
69892
69897
69902
69907
69912
F-45
F-50
F-60
F-45-S
F-50-S
F-60-S
-
-
4-1/2" Forged Vise
5" Forged Vise
6" Forged Vise
4/2" Stationery
5" Stationery
6" Stationery
Swivel base assembly
for F-45
Swivel base assembly
for F-50 & F-60
26
48
63
22
39
55
3
11.9
21.6
28.6
10.0
17.7
25.0
1.4
5
2.8
Pipe
Hangers
Tool Group
Mechanics' Vises
Tools
Abrasives
Wilton's
Mechanics'
Vises are the
best buy for
professional
mechanics!
Part
No.
UPC
No.
Jaw
Width
Jaw
Throat
Opening Depth
744
745
746
21300
21400
21500
4
5
6
4-1/2
5-1/4
5-3/4
Steel Top Jaws
2904040
2904110
2904080
Pipe Jaw
Cap.
Shipping
lb ea.
37
4-1/16 1/4 - 2
3-3/4 1/4 - 2-1/2 50
4-1/8 1/4 - 3-1/2 63
Replacement Parts
Steel Pipe Jaws
2904200
2904200
2904200
Rapid Action Lever Clamp — A and B
OnSite
Supply
Nominal
Throat
Depth
Part
No.
Nominal
Opening
Safety
Standard handle
LC-4
2-3/8
4
LC-6
3-1/8
6
4
8
LC-8
LC-10
4-3/4
10
5-1/2
12
LC-12
LC-20
5
20
Offset handle - for more leverage
5-1/2
12
1800L-12
J-Series lever clamp - with offset handle
JLC24-12
5-1/2
12
Nominal
Clamping
Pressure
Approx.
Weight
400
500
770
880
1110
1440
1.10
1.30
2.40
3.30
5.10
5.30
1800
7.00
1800
9.00
Also available in stainless steel
Rentals
586
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
100 Series
Drop Forged - Heavy Duty
400 Series
Drop Forged, Regular Duty, Extra
Deep Throat
Hi-Tech frames - stronger
and deeper throat depth.
Fasteners
Anchors
"C" Clamps
Strut
Wilton Clamps
UPC
No.
Min. Shipping
Throat Spindle Proof
Weight
Capacity Depth Dia.
Test lb lb
102
103
104
106
108
110
112
14114
14128
14142
14156
14170
14184
14198
0 - 2
0 - 3
0 - 4
2 - 6
4 - 8
6 - 10
8 - 12
1-3/4
3
4-3/4
6-5/8
7-1/2
9-3/4
11-7/8
Min. Shipping
Throat Spindle Proof
Weight
Depth Dia.
Test lb lb
402
403
404
406
408
410
412
0 - 2-1/8
0 - 3
0 - 4-1/2
0 - 6-1/16
0 - 8-1/4
2 - 10-1/8
2 - 12-1/4
2-1/4
2-1/2
3-1/4
4-1/8
5
6
6-5/16
14214
14228
14242
14256
14270
14284
14298
"0" Series
Extra Heavy Duty
Part
No.
UPC
No.
0 F.C. 14509
1 F.C. 14518
1-1/2 F.C. 14527
2 F.C. 14536
3 F.C.. 14545
5 F.C.. 14563
6 F.C. 14572
8 F.C. 14581
10 F.C. 14590
12 F.C. 14599
Philadelphia, PA
610-647-8070
Capacity
Min. Shipping
Throat Spindle Proof
Weight
Depth Dia.
Test lb lb
0 - 3/4
0 - 1-7/16
0 -1-7/8
0 - 2-3/8
0 - 3-3/8
0 - 5-1/2
0 - 6-1/2
0 - 8-1/2
0 - 10-1/2
0 - 12-1/4
3/4
1-1/8
1-5/8
1-3/4
2-3/8
3-1/8
3-3/8
4-1/8
4-1/8
4-1/4
3/8
7/16
5/8
3/4
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
2800
5600
8750
12500
16250
23800
27500
31250
35000
40000
Washington D.C.
877-419-2755
3500
3500
6200
6900
6600
8000
9300
1-5/8
2-1/4
3-3/4
5-1/2
6-7/8
10-1/4
14-3/8
Spring Clamps
The extra heavy duty
models are designed to
stand up to the demands
of heavy industrial
applications like those
encountered in ship
building. With minimum
proof test lb, ranging up
to 40,000 lb; machined,
square spindle heads
stand up to heavy wrench
tightening use.
9/16
9/16
3/4
3/4
3/4
3/4
7/8
1/2
1
2
4-1/4
7-1/4
13-5/8
18-1/2
26-1/2
33-1/4
42-3/4
Abrasives
Springs Clamps make it the tool of
a "thousand-and-one" uses.
Tools
7500
8750
10000
11250
12500
13750
15000
Capacity
Part UPC
No. No.
634 14900
636 14901
639 14903
635 14904
637 14905
639 14906
Boston , MA
800-645-6155
Description
Max. Jaw Overall
Opening
Length
4" Spring Clamp with
Protective Handles & Tips
6" Spring Clamp with
Protective Handles & Tips
9" Spring Clamp with
Protective Handles & Tips
6" Spring Clamp with
Protective Handles & Tips
6" Spring Clamp with
Protective Handles & Tips
9" Spring Clamp with
Protective Handles & Tips
1
4
2
6
3
3
1
4
2
6
3
9
Hartford, CT
800-969-0285
OnSite
Supply
9/16
5/8
3/4
3/4
3/4
3/4
3/4
Part UPC
No. No.
Safety
1-1/2
2
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
Pipe
Hangers
Part
No.
587
Rentals
Threaded
Rod
Recommended for heavy industrial and construction job
site demands, the heavy duty models are some of the
toughest products available for their weight strength ratio.
Fasteners
Bessey Clamps
Anchors
James Morton® Drop-Forged C-Clamps
• Drop-forged heat-treated steel frame
• Swivel pad
• Your choice of spindle and pads: black oxide coated to resist corrosion or
copper coated to resist weld spatter
Strut
Threaded
Rod
Black
Oxide
Spindle
Copper
Coated
Spindle
Nominal
Opening
Nominal
Throat
Depth
Nominal
Clamping
Pressure
Screw
Diameter
Approx.
Weight
JM402
JM403
JM404
JM406
JM408
JM410
JM412
JM402C
JM403C
JM404C
JM406C
JM408C
JM410C
JM412C
2
3
4
6
8
10
12
2
2-3/8
2-3/4
3-5/8
4-1/2
5-3/8
5-3/4
3300
3500
4100
5400
5900
6200
9500
5/8
5/8
3/4
3/4
3/4
3/4
3/4
1.50
1.75
2.75
4.75
8.50
10.25
13.75
Pipe
Hangers
"Step-Over" J-Series Clamps
Tools
All the great features of the legendary Bessey Sliding arm clamps as listed above
... Plus a feature that adds a ton of flexibility to clamping. The return rail lets
the J-clamps "step-over" the lip on channel iron, angle-iron, I-beam or other
obstructions.
Nominal
Throat
Nominal
Depth
Opening
Part
No.
Abrasives
J24-12 5-1/2
J48-20 5-1/2
JLC24-12 5-1/2
12
20
12
Rail
Return
Nominal
Rail
Size
Nominal
Clamping
Pressure
4
4
4-1/2
1-3/16 x 9/16 2660
1-9/16 x 3/4
4880
1-13/16 x 9/16 1800
Approx.
Weight
8.0
18.0
9.0
SQ Series "Super Quick" Clamps
OnSite
Supply
• Deep throat has greater reach... eliminates the need for regular and deep throat C-Clamp
• Manufactured to Bessey's high quality standards... with an economical standard pad.
Safety
SQ
Rentals
588
Part
No.
Nominal
Throat
Depth
Nominal
Opening
Nominal
Rail
Size
Nominal
Clamping
Pressure
Approx.
Weight
SQ-4
SQ-8
SQ-10
SQ-12
SQ-20
4-3/4
4-3/4
4-3/4
5-1/2
4-3/4
6
8
10
12
20
27/32 x 13/32
1-3/16 x 9/16
1-3/16 x 9/16
1-3/16 x 9/16
1-3/16 x 9/16
1300
2660
2660
2660
2660
2.50
5.50
6.00
7.30
8.50
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
These clamps offer a greater reach to eliminate the need to buy both regular and deep throat clamps.
Bessey Heat Treated Steel, Sliding Arm Clamps feature the patented Morpad - the replaceable pad that tilts to 35°.
Fasteners
Heat Treated Steel, Sliding Arm Clamps
Anchors
Bessey Clamps
2400 Series
Regular Duty Clamps
Strut
• Seven sizes - from 6" to 60" openings
• 2660 lb nominal clamping pressure
4800 Series
Heavy Duty Clamps
• For uses such as clamping 3/4" plate
• Five sizes - from 12" to 60" openings
• 4880 lb nominal clamping pressure
• For uses such as clamping 1" plate
• Safety wedge provides additonal locking
pressure on sliding arm
• Three sizes – from 12" to 40" openings
• 7770 lb nomimal clamping pressure
Nominal
Rail Size
Approx. Weight
2660
2660
2660
2660
2660
2660
2660
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
x
x
x
x
x
x
x
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5.00
5.50
5.75
6.80
7.50
10.75
14.25
4880
4880
4880
4880
4880
1-9/16
1-9/16
1-9/16
1-9/16
1-9/16
x
x
x
x
x
3/4
3/4
3/4
3/4
3/4
12.00
14.50
20.00
22.00
28.00
7770
7770
7770
1-15/16 x 1
1-15/16 x 1
1-15/16 x 1
Tools
2400 Series Regular Duty Clamps - with Morpad
2400S-6
6
5-1/2
2400S-8
8
5-1/2
2400S-10
10
5-1/2
2400S-12
12
5-1/2
2400S-20
20
5-1/2
2400S-40
40
5-1/2
2400S-60
60
5-1/2
4800 Series Heavy Duty Clamps - with Morpad
4800S-12
12
7
4800S-20
20
7
4800S-40
40
7
4800S-48
48
7
4800S-60
60
7
7200 Series Extra Heavy Duty Clamps - with Morpad
7200S-12
12
8
7200S-20
20
8
7200S-40
40
8
Nominal
Clamping Pressure
Abrasives
Nominal
Throat Depth
24.00
28.00
38.00
OnSite
Supply
Nominal
Opening
Part No.
Philadelphia, PA
610-647-8070
Stainless Steel In STOCK
Fiberglass Strut In STOCK
Stainless Steel 304 & 316 Strut
Stainless Steel Hardware
Stainless Steel Bolts, Couplings and
Washers
Clips, Anchors and Straps
Fiberglass Strut
Fiberglass Clamps
Fiberglass Hardware
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Safety
NEFCO is your One-Stop for all your Strut Requirements
589
Rentals
Pipe
Hangers
Threaded
Rod
7200 Series
Extra Heavy Duty Clamps
Fasteners
Products For Roofing
Dewalt
Milwaukee TEK Screwdriver
Anchors
6.2 Amp VSR Screwdriver
Versa-Clutch® system to "dial' the
proper torque needed to drive fasteners without stripping or breaking
fastener.
Rubber grip and two-finger, rubber
trigger for increased comfort
Max. Fastener Size: #14
0-2500 RPM Steel Building and
HVAC Screwdriver drives screws
joining multiple sheets of 24 to 10
gauge steel. When the screw head
reaches the selected torque the
adjustable clutch slips with minimum
reaction force.
Part No.
Part No.
6780-20
DW257
Strut
\
Magnetic Nutsetters
Phillips Power Bits
1/4" hex drive. Long Shank
1/4" hex shank power bits. Phillips tip.
Threaded
Rod
Part No.
Hex Size
Part No.
Point Size
MSHL1/4
1/4"
2-9/16"
O.A.L.
321P
#1
2-34"
MSHL5/6
5/16"
2-9/16"
302P
#2
1-15/16"
MSHL3/8
3/8"
2-9/16"
322P
#2
2-3/4"
342P
#2
3-1/2"
303P
#3
1-15/16"
343P
#3
3-1/2"
Milwaukee
O.A.L. (in.)
Pipe
Hangers
11 Amp
Reciprocating Saw
3/4" Stroke, 0-2800 spm.
Adjustable pivot shoe
Accepts standard 1/2 in. shank sawzall blades
Includes 2 blades, & case
Part No.
6509-22
Bosch Tools
Tools
7/8" D-Handle Rotary
Hammer
Milwaukee
Sawzall Reciprocating Saw Blades
Fits all Sawzalls and standard competitive saws. Wood and Metal
cutting. Please see our Tool Section for a complete listing of sizes
and Manufacturers, including Lenox, available
Part No.
TPI
Length
Abrasives
48-01-6031
5/8
48-01-6036
6
9"
48-01-6037
6
12"
48-01-6182
14
6"
48-01-6187
14
9"
48-01-6189
6
12"
OnSite
Supply
Milwaukee
Tilt-Lok Circular Saw Kit
Safety
7-1/4" circular saw with 8-position
Tilt-Lok handle, carbide blade, hex
blade wrench and impact resistant
carrying case. Features 15.0 Amp, 3
1/4 maximum horsepower motor
6390-21
Rentals
11224VSR
Three operational modes for versatility: Hammer only, Rotation only, Hammer & Rotation.
6"
Metal Cutting
590
Part No.
Includes 5 bits, 360° Auxiliary handle, Depth gauge, Plastic case
Wood Cutting
Part No.
Vario-lock positioning rotates and
locks chisel into 36 different positions to optimize work angle.
Hartford, CT
800-969-0285
Milwaukee
SDS Plus Carbide Masonry Bits
2- Cutter Bits
Small sampling of bits available. Please see our Tool Section for
complete listing of bits available.
Part No.
Size (in.) Dia. x U.L x O.L.
48-20-7421
7/32 x 4 x 6
48-20-7422
7/32 x 6 x 8
48-20-7424
7/32 x 9 x 11
48-20-7530
1/4 x 2 x 4-1/2
48-20-7531
1/4 x 4 x 6
48-20-7532
1/4 x 6 x 8
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Products for Roofing
Voltec Industries
All Purpose Cords
Powers Fasteners Zamac Nailin® Anchors
Mushroom Head
Year-round, all-weather extra flexible cord.
A tamper-proof nail drive anchor. Body formed from Zamac alloy,
nails are carbon steel. May be used in concrete, brick or stone. Not
recommended for overhead applications. Size range 3/16” x 7/8” to
1/4” x 2”. Drill diameter same as nail diameter. Packaged 100/box.
Lighted ends indicate power status.
2820
1/4” x 1-1/2”
2806
1/4” x 3/4”
2826
1/4” x 2”
2808
1/4” x 1”
2804
1/4” x 3”
2814
1/4” x 1-1/4”
Resists the negative effects of oil, water, weather, abrasion, and
ozone.
Part No.
Length
AWG
Max
Amps
Max
Watts
All-Purpose 14/3 ga. 3-Conductor SJT W-A Grounding 300 V
05-00341
25'
14/3
15
1875
05-00342
50'
14/3
15
1875
05-00343
100'
14/3
13
1625
Chip Brushes
All-Purpose 12/3 ga. 3-Conductor SJT W-A Grounding 300V
For a wide range of projects. Economy white
bristle.
05-00347
25'
12/3
15
1875
05-00348
50'
12/3
15
1875
05-00349
100'
12/3
15
1875
89701
89702
Thickness
4"
4"
3/8"
11/16"
Trim
Cold Weather 12/3 ga. 3-Conductor SJEOO W-A Grounding 300V
1-3/4"
2-1/2"
05-00141
Paint Roller Frames &
Covers
Specifications: Heavy-duty 9"
Roller Frame: 5/16" dia. metal
frame, 2 plastic caps, a 5-wire
cage and a solid plastic handle
with a threaded grip. 9" Paint
Roller Covers: 100% synthetic fiber (3/8” nap), 3-ply phenolic core
backing works well with all paints.
4" Roller Frame: 1/4" dia. metal
frame, 23" L. 4" Polyester Covers
work well for latex paints and is
especially suited for wall and floor
edging and line painting.
Part No.
Description
Paint Roller Frames
99076890
Heavy Duty 9” Paint Roller Frame
99748540
4” Paint Roller Frame
Roller Covers
9TU038
9” Roller Cover 3/8” nap
9SC038
9” Heavy Duty Roller Cover 3/8” Nap
4SC038
4” Heavy Duty Roller Cover 3/8” Nap
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
25'
12/3
15
1875
05-00142
50'
12/3
15
1875
05-00143
100'
12/3
15
1875
Voltec Industries
3-Way Power Block Adapters
with GFCI
Abrasives
Size
3-Conductor ST W-A 3-Outlet Power Block 300V
Plug Three Power Tools or Appliances into One
Outlet
GFCIs meet or exceed all UL, cUL and OSHA
requirements
Part No.
Length
AWG
Max
Amps
Max
Watts
GFCI
04-00105
3'
12/3
15
1875
YES
04-00090
2'
12/3
15
1875
NO
Newborn
Professional Caulking Gun
Hex Rod - Parallel Frame
Safety
Part #
Strut
3/16” x 7/8”
Threaded
Rod
2802
Remain flexible under extreme hot or cold
weather conditions.
Pipe
Hangers
Size
Tools
Part No.
Cold Weather Extension Cords
OnSite
Supply
Size
Meets UL and OSHA standards for outdoor
cords.
10:1 Thrust Ratio
Part No.
E-Z Thrust
111
E-Z Load Front Cap
Ladder Hook
Includes Patented "Caulk Buddy" Finishing Tool w/Caps.
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
591
Rentals
Part No.
Anchors
Outdoor Extension Cords
Fasteners
Products for Roofing
Anchors
Champion Cutting Tool Corp.
Part No.
T-Handle Tap Wrench
Part No.
Size
Size
TARP8X10BLUE
Range
8'x10'
TARP10X12BLUE
10'x12'
Poly Tarps
Commercial Grade blue poly
tarps with woven reinforcement
• Grommeted
• Weatherproof/Water repellent
• Mildew-proof
• Flexible
• Washable
• Lightweight
1
1/16" - 1/4"
TARP16X20BLUE
16'x20'
CCT3002-2
2
7/32" - 1/2"
TARP20X20BLUE
20'x20'
TARP20X30BLUE
20'x30'
TARP30X40BLUE
30'x40'
TARP40X40BLUE
40'x40'
TARP40X60BLUE
40'x60'
Strut
CCT3002-1
Champion Cutting Tool Corp.
Carbon Steel Bottoming Hand Taps
Threaded
Rod
Bottoming taps have only 1 to 1 1/2 threads of chamfer and used
to tap the bottom of a blind hole.
Please see our Tool Section for a complete listing of taps and dies.
Part No.
# of Flutes
Thread Length
O.A.L
302-5/16-18B
4
1-1/8"
2-23/32"
302-3/8-16B
4
1-1/4"
2-15/16"
Polyethylene Sheeting
Fire retardant and woven
polyester mesh reinforced styles
available.
Pipe
Hangers
Part No.
Size
Mil
Part No.
Size
Mil
C-410
10’ x 100’
4
C-610
10’ x 100’
6
C-420
20’ x 100’
4
C-620
20’ x 100’
6
Champion Cutting Tool Corp.
Cobalt Jobber Drills
Tools
Straight Shank, 135° Split Point,
Gold Oxide Finish, M4-2 Cobalt
HSS. Please see our Tool Section
for complete listing of sizes and
other drill bits
Part No.
Size
705C-3/16
3/16"
705C-1/4
1/4"
Abrasives
705C-5/16
5/16"
3/8"
705C-3/8
Heavy Duty
Contractor’s Trash Bags
Flute Length
Overall Length
2-5/16"
3-1/2"
2-3/4"
4"
Part No.
Description
3-3/16"
4-1/2"
19020
Trash Bags
3-5/8"
5"
42 Gallon (7 Bushel) Black Trash
Bags. 3 Mil Strength. 20 per box.
Duct Tape
OnSite
Supply
Stanley Industrial Tools
Stanley Industrial Tools
Utility Knife Hook Blade
Razor Blades
Aluminum Foil Tape
Single edge utility knife razor
blades.
2 mil Aluminum Foil
Acrylic Adhesive w/ easy release liner
UL and HUD approved
Part No.
Pkg.
Safety
Designed to cut linoleum,
roofing material, cartons, etc.
without damage
11-921
5/pack
Two hooked ends cut to full
thickness on one stroke
11-921T
10/pack
11921A
100/pack
Part No.
Pkg.
11-961
5/pk
Rentals
592
Hartford, CT
800-969-0285
Part No.
UNT412
Boston , MA
800-645-6155
Two Grades:
General
Purpose and
Contractor’s
Grade
Contractor’s Grade is 11 mil
General Purpose Grade is 8 mil
Waterproof
Silver
2” x 60 yards
Part No.
Grade
83689
Utility
4137
Contractor's
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Krylon® Industrial Paints
Cloth Rags and
Wipers
Industrial Quik-Mark™
CPW100
Cotton Polo (Colored)
50 lb.
CPW300
Fleece
50 lb.
CPW160
White Flannel
50 lb.
CPW200
Colored Flannel
50 lb.
CPW850
White T-Shirt
50 lb.
CPW150
New White Knit
50 lb.
CPW325
Cheese cloth
50 lb.
CPW500
White Sheeting
50 lb.
CPW090
New Bar Towels
50 lb.
CPW700
Corduroy
50 lb.
Water-Based Marking Paints
Inverted Marking Paint Industrial Quik-Mark™
•
•
•
•
Ideal for marking the most common indoor and outdoor surfaces
Fast-drying, high-solids formula penetrates, adheres to hot surfaces
VOC compliant and lead-free
Pack: 12
Part No.
16 in. Bow Rake
Wooden handle bow rake, steel head, closed ferrule
with wooden handle.
Part No.
1886300
Ames/True Temper
30" Poly Leaf Rake
Part No.
64169
Description
30" Poly Leaf Rake
Size
(oz. net wt.)
S03500
Clear
S03401
Brilliant White
S03402
Brilliant Yellow
S03403
Brilliant Orange
S03404
Brilliant Red
S03406
Brilliant Blue
S03407
Brilliant Green
S03801
Utility Yellow
Fluorescent, Water Based
S03801
Utility Yellow
S03610
Red
S03612
Pink
17
12
12
12
12
12
12
12
S03620
S03630
S03410
S03405
S03408
S03409
17
17
12
12
12
12
17
17
17
Caution Blue
Safety Green
Red/Orange
Pink
Orange
Red
Erin Rope
Natural Fiber Manila Rope
3-strand natural fiber manila rope.
The strongest of all natural fiber ropes.
Part No.
TWM081200
Size
1/4” x 1200’
OnSite
Supply
30 Reinforced poly tines
48" Threaded hardwood handle
Color
Water Based Marking Paints
Ames/True Temper
For large capacity leaf raking and general purpose
clean up
Strut
50 lb.
Threaded
Rod
Mixed Rags (#1 Lightweight)
Pipe
Hangers
CPW400
Tools
Weight
Abrasives
Description
Ames/True Temper
J-100 Series
Long Handle Industrial Shovels
Poly Snow Shovel
For lifting and throwing light accumulations of snow
18" x 13-1/2" Ribbed poly blade for greater durability
36" Vinyl-coated steel handle with snow poly D-grip
(Specifications subject to change)
Part No.
Description
1627200
Poly Snow Shovel
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Blades with onion skin finish for better release
Rolled back step
48" tapered, lacquered ash handle
Blade Dimensions: 9 1/2"x12"
Part No.
Desc
BMTLR
Round Point
BMTLS
Square Point
Boston , MA
800-645-6155
Safety
Ames/True Temper
Hartford, CT
800-969-0285
593
Rentals
Part No.
Both APWA and fluorescent colors
are available in water and solventbased formulations.
Use on concrete, pavement, gravel,
grass, brick, asphalt, athletic fields,
utility, excavation, ground, surveying and construction marking.
Anchors
Inverted Marking Paint
Inexpensive all-around,
all-purpose cleaning. Available in a variety of sizes
and materials. Standard
size: 50 lbs. Call for your
specific sizing needs.
Head: 16-3/4"
Teeth: 16
Handle: 60"
Fasteners
Products for Roofing
Fasteners
Products for Roofing
Galvanized Coil
Roofing Nails
Anchors
Galvanized, 1-1/4” Long,
7200 per box
Advance Brush Floor Brooms
A wide selection of quality surface sweeping brooms. Filaments
range from soft horsehair to stiff Palmyra and steel wire for a
variety of sweeping needs. Use with threaded handle.
Part
No.
Sweep
Strut
89230
89231
Fine
89224
18”
Silver
flaggedtipped
plastic
24”
Trim
Length
3”
3”
24”
2-5/8”
Threaded
Rod
Black
Tampico
30"
GRCR3DGAL
Block
Type
Foam
Plastic
3”
18”
Med
89255
89889
Fill Material
30”
89249
89252
Width
Part No.
2-5/8”
Lacquered
Hardwood
2-5/8"
60" Wood Handle w/ threaded metal tip
Barrier Fence
Pipe
Hangers
PVC Coated Work Gloves
Jackson Safety
Knit Wrist
Dust/Nuisance Mask
Single dip economy PVC
coated. Smooth finish. Interlock
lining, knit wrist. Size: Large
This dust mask provides economical protection and relief
from common nuisance dusts.
Do not use when dust concentrations exceed OSHA PEL. Not
rated. 50/box. 20 box/case
High Visibility
Part No.
Lightweight, economical, durable
and highly visible.
OSHA Orange for high visibility
UV Stable for long life
High strength polypropylene mesh
4’ x 100’ rolls
1700
Part No.
3005846
Tools
Part No.
Desc
BFW4100GR
Barrier Fence, 4’ x 100’
Jackson Safety
Perimeter Safety Flags (Pennants)
Abrasives
• Made of low density UV polyethylene for
long lasting use
• Tensile strength of 107 lbs for extra durability
Part No.
Tyvek® Coveralls
Ideal for applications when dry particulates are hazardous, including spray-painting, agriculture and lead
remediation. Provides durable protection while remaining comfortable to workers. Sizes Large through
3X-Large. Packaged/Sold 25 per case.
Part No.
TY120S
Description
3006635
Yellow, 100 ft.
OnSite
Supply
Master Lock Co.
Laminated Steel Padlock
4-Pin Cylinder
Be sure to visit
Safety
1-3/4" wide laminated body
3/4" horizontal shackle clearance
Shackle is 5/16" diameter
Keyed alike padlocks are sold in
multiples of 6
Part No.
www.GoNefco.com
Shackle Clearance
Keyed
1LJ
15/16”
Different
1KA
15/16”
Alike
Rentals
594
Hartford, CT
800-969-0285
Online Catalog • Submittals
New Products • and More!
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
MSA V-Gard® Protective Caps
Safewaze
Features advanced styling and meets
ANSI Z89.1, 2003 Type I, Class G,
E, and C Standards
• Lightweight, universal sized harness
• Single back D-ring
• Mating chest and friction buckle leg
connections
• 10911 includes 2 waist D-rings for
positioning
• 310 lb. rated, exceeds OSHA 1926,
ANSI z359.1 Standards
Strut
• Large knob for easy adjustment
• Comfortable, four-point webbed
suspension
• Adjustable dual nylon crown straps
• Perforated vinyl sweatband wipes clean easily
Anchors
Safelight® Full Body Harness
Fas-Trac® Ratchet Suspension
Color
Fas-Trac Ratchet Suspension
Part No.
475360
10910
Back
10911
Back, Waist
Yellow
Other Colors: White, Blue, Orange, Red, Gray,
Green, Hi-Viz Orange, Hi-Viz Green.
D Rings
Safewaze
Threaded
Rod
Part No.
Safelight™ Shock Absorbing Lanyard
Econo Style ESK Safety Vests
One Size Fits Most
Elastic Sides for easy fit
Mesh Fabric
Hook and look closure
Part No.
209512
Color
Safewaze
3017587
Orange, 1/2”
Silver Beaded
Safewaze
Pac-Kit
Lifeline Assemblies
#25 First Aid Kit
• 5/8” Low-elasticity SafeCom
poly/dacron blended rope
• Standard sizes from 25’ to 100’
• Longer assemblies and bulk rope
available
• Iinclude 2 steel snap hooks
• Rope grab available separately
Weatherproof Plastic
Case
Contents exceed requirements of ANSI Standard
z308.1-2003
Neat, orderly interior
packaging, makes contents
easy to locate and use!
Contains Eyewash & Dressings
Part No.
NEFPAC6430
Part No.
Eagle Manufacturing Co.
Safety Cans
Type I & Type II
• Type II cans have flame arrestors
in both fill and pour spouts and a
flexible metal pour spout.
• Funnel attachment (F-15) for Type
I cans, for easy, accurate dispensing. Funnel comes standard with
model UI-50-FS (5 gallon).
Philadelphia, PA
610-647-8070
Part No.
0117
Washington D.C.
877-419-2755
Capacity
Part No.
Length
0221-25
25’
0221-30
30’
0221-50
50’
0221-100
100’
Hose
OD x L
Type I - 24 ga. Galvanized Steel
—
UI-20-FSRED
2 gal.
UI-50-FSRED
5
incl. funnel
UI-50-FSYELLOW
5
incl. funnel
UI-50-FSBLUE
5
incl. funnel
Type II - 24 ga. Galvanized Steel
U2-26-S
2
1" x 12"
U2-51-S
5
1" x 12"
U2-51-SX5
5
5/8" x 12"
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Abrasives
Lime
Reflective
OnSite
Supply
3017586
• Stainless Steel,
• Self-Trailing, fits 5/8" Rope
• **Requires Anchorage Connector to Attach Rope to Anchor in
Most Cases
• Exceeds OSHA 1926, ANSI
z359.1-2007 Standards
Gasoline
Gasoline
Diesel
Kerosene
Gasoline
Gasoline
Gasoline
595
Safety
Orange
Tools
Rope Grab
Non-Reflective
3017585
1” web with external shock pack
6 foot length
2 Snap Hooks
Maximum Arrest Distance - 42" < 900 lbs.
310 lb. rated, exceeds OSHA 1926, ANSI z359.1 and
CSA z259.1
Rentals
Part No.
•
•
•
•
•
Pipe
Hangers
Jackson Safety
•
•
•
•
Fasteners
Products for Roofing
Fasteners
Band Saw Blade Selection Guide
Selecting Carbide Tipped Bandsaw Blades
Anchors
The following information needs to be specified when a band saw blade is ordered:
Product Name Length x Width x Thickness Teeth Per Inch
For Example: ARMOR® CT BLACK 16" x 1-1/4" x .042" 2.5/3.4 TPI
Step #1: Analyze the sawing application
Strut
Machine: Determine the band size for the machine
(Length x Width x Thickness).
Material: Find out the following for the material to be cut:
• Material Type/Grade
• Size
• Shape
Operation: Is this a production or general purpose sawing operation?
Step #2: Determine HIGH PERFORMANCE VS. SPECIAL APPLICATION
Use the charts below.
• Locate the type of material to be cut in the top row.
• Read down the chart to find which blade is recommended.
Threaded
Rod
Step #3: Determine the proper number of teeth per inch (TPI )
If having difficulty choosing between two pitches, the coarser of the two will generally give better performance.
When compromise is necessary, choose the correct TPI first. A general rule for bundles: Determine the correct TPI for the largest continuous cross section.
Step #4: Confirm the Desired Product is Available
• Go to the product page for the product you have selected.
• Confirm that product is available in the correct blade width and TPI.
Pipe
Hangers
Rx®+ Bi-Metal Band Saw Blade
Engineered to Cut Structurals, Tubing and Bundles
Long Blade Life and Extreme Durability
Patented tooth profile resists tooth strippage, even at higher feed rates
Optimized tooth pitch/set sequence
Abrasives
Width x Thickness
In.
mm.
5/8 x .032
16 x 0.80
3/4 x .035
19 x 0.90
1 x .035
27 x 0.90
1-1/4 x .042
34 x 1.07
1-1/2 x .050
41 x 1.27
2 x .050
54 x 1.27
2 x .063
54 x 1.60
2-5/8 x .063
67 x 1.60
2/3
w
w+
w+
w+
w+
w+
3/4
w
w+
w+
w+
w+
w+
TPI
4/6
w
w
w+
w+
w+
w
w
5/8
10/14
*
w
w
w
w
w
APPLICATION
Tools
Quiet Cutting, Reduced Vibration
Carbon Steels
Structural Steels
* = Matrix
edge
+ = Extra
heavy set
available to
prevent blade
pinching
OnSite
Supply
Friction Band
Friction Cutting Operations
Fast cutting
Special set design for increased frictional heat
Long lasting
Special silicon carbon steel provides extended fatigue life
Rentals
Tooth Form
Set Pattern
Width x Thickness
In.
1 x .035
596
Standard
Lenox® Set
TPI
mm.
10
25.4 x 0.90 w
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
APPLICATION
Safety
Note: Operates at band speeds up to 20,000 fpm.
Ferrous Metals
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
#32 Wood Carbon Bandsaw Blade
Specialized Woodworking Applications
Anchors
Straighter, easier cutting
Manufactured with a heavier gauge (.032")
flexible carbon steel material
Designed for contour cutting of wood
Perfect for furniture manufacturing operations
APPLICATION
Wood
Threaded
Rod
Hook
Raker Set
Alternate
TPI
TPI
mm.
2 3 4
2 3 4
6.4 x 0.80
w w
9.5 x 0.80
w w w w w
12.7 x 0.80 w w w w
Strut
Note: Not recommended for blades shorter than 15' long. If
shorter blade is required, Lenox® Flex Back is recommended
Tooth Form
Set Pattern
Width x Thickness
In.
1/4 x .032
3/8 x .032
1/2 x .032
Fasteners
CARBON Band saw Blades
Classic®
The Ultimate Multi-Purpose Blade
Long Life In General Purpose Cutting Applications
Pipe
Hangers
Patented Tuff ToothTM design reduces tooth strippage
M-42 high speed steel edge for excellent heat and wear
resistance
+ = Extra heavy set available to prevent blade pinching
1 x .035
27 x 0.90
1-1/4 x .042
34 x 1.07
1-1/2 x .050
41 x 1.27
2 x .050
54 x 1.27
2 x .063
54 x 1.60
2/3
w
w
w
w
w+
WAVY
TPI
HOOK
TPI
3/4
4/6
6/8
5/8
6/10
8/12
10/14
14
18
3
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w+
w
w+
w
w
w
w
w
w
w
w
Aluminun / Alloy Steels
Non FerrousStainless Steels
Carbon Steels Tool Steels
Structural Steels
Tools
mm.
19 x 0.90
VARI-TOOTH®
TPI
Abrasives
In.
3/4 x .035
TUFF TOOTHTM
TPI
APPLICATION
Tooth Form
Width x Thickness
Diemaster 2®
Engineered for Contour Cutting
Faster Cutting with M-42 High Speed Steel Tooth Edge
Runs at twice the speed of carbon blades for faster, easier cutting
OnSite
Supply
Longer Blade Life
Lasts 10 times longer than carbon blades
For General Purpose Hand-Fed Applications
Tool and die shops, machine shops, maintenance facilities
1/4 x .035
6.4 x 0.90
3/8 x .025
9.5 x 0.64
3/8 x .035
9.5 x 0.90
1/2 x .020
12.7 x 0.50
1/2 x .025
12.7 x 0.64
1/2 x .035
12.7 x 0.90
Philadelphia, PA
610-647-8070
6/10
8/12
10/14
14/18
w
w
w
w
10
14
18
Hook
TPI
24
3
w
6
w
w
w
w
w
4
*
*
*
*
w
w
w
w
w
w
Washington D.C.
877-419-2755
w
w
w
w
w
w
*
w
Boston , MA
800-645-6155
Aluminun / Alloy Steels
Non Ferrous Stainless Steels
Carbon Steels
Tool Steels
Structural Steels
Wood
Hartford, CT
800-969-0285
597
Safety
mm.
6.4 x 0.64
Standard
TPI
Rentals
In.
1/4 x .025
VARI-TOOTH®
TPI
APPLICATION
Tooth Form
Width x Thickness
Fasteners
Sawing Fluids / Lubricants
Band-Ade®
Anchors
Semi-Synthetic Sawing Fluid
Strut
Extends blade life
Reduces machine wear and improves band saw
blade tool life
Water-soluble formulation
Surfaces can be welded and painted over
Does not contain silicone, Safer for the environment
Does not contain chlorine, sulfur, petroleum oils or sulfonates and
is biodegradable
Safe to use
Gentle to operators' hands; does not remove oil from skin
Threaded
Rod
Prod No.
68004
68005
68003
68001
68007
Gallon
1
2-1/2
5
55
275
Container Size
Liter
3.8
9.5
18.9
208.2 drum
1040.9 tote
Containers Per Case
4
2
-
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 0
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
Not recommended for use as a spray lubricant. Mix this product with water as recommended
Pipe
Hangers
Saw Master®
Synthetic Sawing Fluid
Tools
Extends blade life
Lubricates and cools for extended tool life
Water-soluble formulation
Surfaces can be welded and painted over
Does not contain silicone
Rejects most tramp oils
Rejects hydraulic and oils from materials
Low to non-foaming
Longest sump life
Excellent anti-microbial package prevents rancidity
Can be used in most hard water applications
Abrasives
OnSite
Supply
Prod No.
68064
68061
68062
68063
Gallon
1
5
55
55
Container Size
Liter
3.8
18.9
208.2 drum
1040.9 tote
Containers Per Case
4
-
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 1
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
Not recommended for use as a spray lubricant. Mix this product with water as recommended
Machine Cleaner
Safety
Prepares Your Sump for the use of LENOX® Sawing Fluids
Prod No.
68006
Rentals
598
Gallon
1
Container Size
Liter
3.8
Hartford, CT
800-969-0285
Containers Per Case
4
Boston , MA
800-645-6155
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 1
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Strut
Anchors
Quick Reference
General Safety Supplies
Fire Extinguishers . . . . . . . . . . .
Lockouts . . . . . . . . . . . . . . . . .
Pipemarkers . . . . . . . . . . . . . . .
Rebar Caps . . . . . . . . . . . . . . . .
Safety Padlocks . . . . . . . . . . . .
Traffic Safety . . . . . . . . . . . . . .
627
623
627
627
623
628
Pipe
Hangers
Tools
Gloves . . . . . . . . . . . . . . 614 - 617
Hard Hats . . . . . . . . . . . . 610 - 611
Hearing Protection / Rainsuits /
Boots . . . . . . . . . . . . . . . . . . . . 607
High Voltage Protection . 620 - 622
Respirators / Disposable . . . . . . 612
Respirators / Air Purifying . . . . . . 613
Signs . . . . . . . . . . . . . 625 - 626, 628
Winter Liners / First Aid . . . . . . 618
Abrasives
Personal Protection
ARC Protection Clothing / Kits 620
Disposable Clothing / Tyvek . . . 619
Eye Protection . . . . . . . . 608 - 609
Fall Protection / Anchorage . . . . 604
Fall Protection / Confined Space &
Rope Grabs . . . . . . . . . . . . . . . 606
Fall Protection / Harnesses &
Lanyards . . . . . . . . . . . . . 600 - 603
Fall Protection / Kits &
Lanyards . . . . . . . . . . . . . 601 - 602
Fall Protection / Lanyards &
Positioning . . . . . . . . . . . . . . . . 603
Fall Protection / Retractable
Lifelines . . . . . . . . . . . . . . . . . . 605
Threaded
Rod
Safety
105000
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Fall Protection Kit
30500
• 10910 Harness
• 209712 Shock Lanyard
• 10910 Harness
• 0221-50-5/8” x 50 ft. Rope
• 209512 Shock Lanyard
• 0110 Rope Grab - 5/8”
• 4513 Heavy-duty Tool Bag
• 4000 Reusable Roof Bracket
Boston
,
MA
Hartford, CT
• 4520 Tool Bag
800-645-6155
800-969-0285
599
Rentals
Roofer's Kit
Safety
OnSite
Supply
Fall Protection Kits
Fasteners
Fall Protection / Harnesses & Lanyards
Anchors
Safelight® Full Body
Harness
Value Price, Quality
Construction
Safelight® Fall Protection Kit for Electrical and Mechanical Contractors
Lightweight, Universal Sizing
enables this harness to be
an excellent value for any
application.
30500
Strut
A fall protection kit
designed specifically for
the needs of Mechanical
and Electrical Contractors
10910
Full body harness with
single Back D-ring
Includes: 10910 Harness,
209512 Shock Absorbing
Lanyard and Kit Bag.
10911
Threaded
Rod
Full body harness which includes Back D-ring and two
side D-rings for positioning.
Part No. Description
30500
10910
209512
4513
Safelight® Fall Protection Kit
Full Body Harness with Mating Buckles
6’ Shock Absorbing Lanyard
Heavy-duty Tool Bag
209512
Six foot shock
absorbing lanyard
Pipe
Hangers
Ameba® Plus Premium Harnesses
1311 Ameba® Plus
Premium Harness with
Waist Pad/Tool Belt
Moves with the wearer for extra comfort
Tools
Abrasives
The Ameba features a special nonelastic helical yarn webbing that
stretches and moves with wearers
for non-binding mobility. Unlike
competitive harnesses that utilize
elastic blend webbing, the Ameba
harness maintains its shape and
structural integrity wear after wear
and most importantly, limits total
fall distance. It is the best of both
worlds, comfort and quality
Ergonomically designed for the
professional, the Ameba harness
adds comfort and mobility to
increase worker performance.
The Ameba design incorporates
a flexing webbing with a padded
shoulder and back pad for
comfort and mobility.
Includes back D-ring and (2) side
D-rings for positioning. Available
in sizes S-M, L-XL.
Ameba 1450
Full body harness with single back
D-ring. Sizes S-M, L,-XL
Ameba 1451
OnSite
Supply
Full body harness which includes
back D-ring and two side D-rings
for positioning. Sizes S-M, L-XL.
D-Ring Expander
Tangle-Free, Comfort Shoulder
and Back Pad
Safety
Part No.
Extend the back D-Ring
on harness by 18". One
double-locking snaphook and D-Ring
Description
Ameba 1450
Ameba 1451
Ameba 1311
Rentals
600
#5550
Full Body Harness w/ single back D-ring
Full Body Harness w/ single back D-Ring and (2) side D-rings for postioning
Full Body Harness w/ single back D-ring, (2) side D-rings for positioning & Waist Pad/Tool Belt
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Airflow
Fasteners
Fall Protection / Harnesses & Lanyards
AirFlex Full Body Harness
The Ultimate Design for Cooler Wear
Includes: Back D-ring, (2) side d-rings for positioning and the exclusive double waist pad/tool belt.
EXCLUSIVE Double Back Pad
Safewaze makes extended wear
even more comfortable with the
cushion and support of a double
back pad!
Part No. Description
Pipe
Hangers
1511ND Airflex Full Body Harness
209512 6’ Shock Absorbing Lanyard
4513
Heavy-duty Tool Bag
Threaded
Rod
Designed for the extreme conditions in the Las Vegas sun, the
Kinetic harness is engineered to provide the highest level of protection without sacrificing freedom of movement. The lightweight
and breathable construction allows for all day. Airflex combines
ergonomic design with state-of-the art webbing material for unparalleled performance and wearer comfort. The webbing allows air
to flow through it for cooler wear, while the unique foam padding
actually “forms“ to the body during wear. Available in sizes S-L,
L-XL, XXL.
Strut
1511ND
1050 Feather® Full-Body
Harness
The "Original" TangleFree Harness
Tools
The Feather is the original
SafeWaze harness. Today, it
remains a popular choice and
features a tangle-free D-Ring.
Apache® Full-Body Harness
400 lb. Fall Arrest System
Apache® Lanyard
For Use with the Apache Fall Arrest System
The Apache webbing features a 10K tensile strength web for
heavy weight applications. It is also the only in-stock, ready-toship 3x size harness.
400 lb. rated lanyard for use with Apache Fall
Protection system, Class E-6 for CSA..
#1040
6' Shock-absorbing lanyard with 2 locking snap hooks.
#1041
Full body harness with single Back D-ring & two side D-rings for positioning
XXL, XXXL.
400 lb. rated cross arm strap for use with Apache
Fall Protection system.
#4550-E
Apache® Full-Body Harness w/ Comfort Shoulder
Pads and Waist/Tool Belt
#1710
Safety
Apache® Cross Arm Strap
For Use with the Apache Fall Arrest System
OnSite
Supply
Full body harness with single Back D-ring XXL, XXXL.
#3530-E
Full body harness with single Back D-ring LG, XL, XXL, XXXL.
#1711
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
601
Rentals
Full body harness with single Back D-ring & two side D-rings for positioning
LG, XL, XXL, XXXL.
4' Cross-Arm Strap
Philadelphia, PA
610-647-8070
Abrasives
Includes back D-ring. Available
in sizes S-M, L-XL, XXL.
Fasteners
Fall Protection / Kits & Lanyards
Fall Protection Kits
Anchors
Strut
Roofing Fall Protection Kit
Threaded
Rod
#20000
#10500
•
•
•
•
•
•
Roofing Fall Protection Kit
10950 Harness
209712 Shock Lanyard
0221-50-5/8" 50' Lifeline Rope
0110 Rope Grab - 5/8"
4000 Reusable Roof Anchor
4520 Tool Bag
•
•
•
•
•
•
Roofing Fall Protection Kit
#30570-S
10910 Harness
209512 Shock Lanyard
0221-50-5/8" 50' Lifeline Rope
0116-R Rope Grab - 5/8" (Attached)
(2) 4651X Disposable Roof Anchors
5000 Bucket
•
•
•
•
•
10950 Harness
209712 Shock Lanyard
4550 6' Cross Arm Strap
0116-R Rope Grab - 5/8" (Attached)
4520 Heavy-Duty Tool Bag
Pipe
Hangers
Lanyards
Tools
SAFESTOP™ Web Lanyards
Safelight™ Web Lanyard
All web lanyards employ 1" webbing with
double locking snap hooks and SafeStop
Absorber. All weight capacity: 310 lbs.
Abrasives
#209512
Polyester webbing
Length: 6 feet
Safeabsorb™ Web Lanyards
All Low Profile SafeAbsorb lanyards use doublelocking snap hooks and have an imp
act indicator that is exposed when the lanyard
is subjected to a fall. Low Profile SafeAbsorb
lanyards feature an integrated shock absorber
that brings the worker to a smooth and easy
stop.
#3712-6'
(2) Double-locking snap forged snap hooks
Length: 6 feet
Weight capacity: 310 lbs.
OnSite
Supply
#3712-4'
Safeabsorb™ Web Lanyard
Safety
All Low Profile SafeAbsorb lanyards use doublelocking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#209712
(2) Double-locking snap forged snap hooks
Length: 4 feet
Weight capacity: 310 lbs.
#3713
With Standard Snap and 2.75" Opening
Double Locking Rebar Hook
Length: 6 feet
Weight capacity: 310 lbs.
Rentals
(2) Double-locking snap Stamped steel
snap hooks
Length: 6 feet
Weight capacity: 310 lbs.
602
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
All Low Profile SafeAbsorb lanyards use doublelocking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#3510
Nylon webbing
Length: 3 feet
#3511
Nylon webbing
Length: 4 feet
#3512
Nylon webbing
Length: 6 feet
#3512-0241
Includes (2) 2.75" Double-Locking Rebar Hooks
Nylon webbing
Length: 6 feet
#3510-0241
100% Tie-Off Dual-Leg Lanyard. Includes (2)
2.75" Double-Locking Rebar Hooks
Nylon webbing
Length: 6 feet
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Tybak™ Shock Absorbing
Web Lanyards / Tie-Offs
Length: 4-6 feet
Weight capacity: 310 lbs.
#3571
#3570-0241
100% Tie-Off Dual Leg. Nylon webbing
Length: 4-6 feet
Same as 3570 with one locking snap hook
and one 2.75" Rebar Hook
#3570-0241
Length: 4-6 feet
Weight capacity: 310 lbs.
100% Dual Leg Tie-Off. Nylon webbing.
Snap Hook and 6,000 lb. Rated Carabiner.
Length: 6 feet
Postioning Assemblies
Tools
Same as 3570 with one locking snap hook
and two 2.75" Rebar Hooks.
Length: 4-6 feet
#3813
#3570
Carabiners
#0210-3
Tear-Drop
Steel Auto-lock
Carabiner
SAFESTOP™ Dual-Leg Web Lanyards
#SP3610-S Web Assembly
2.75” Rebar Hook, 2 Double Locking Snap
hooks.
All Low Profile SafeAbsorb lanyards use doublelocking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#0210-A
Aluminum
Auto-lock
Carabiner
#3550
Abrasives
Single Leg. Nylon webbing. Snap Hook and
6,000 lb. Rated Carabiner.
Length: 6 feet
All SafeStretch lanyards use doublelocking snap hooks and have an impact
indicator that is exposed when the lanyard
is subjected to a fall. SafeStretch lanyards
combine a shock absorber and lanyard
that reduces force and brings the worker
to a smooth and easy stop.
OnSite
Supply
#3812
All SafeStretch lanyards use doublelocking snap hooks and have an impact
indicator that is exposed when the lanyard
is subjected to a fall. SafeStretch lanyards
combine a shock absorber and lanyard
that reduces force and brings the worker
to a smooth and easy stop.
Threaded
Rod
Safestretch Expandable Web
Lanyard
™
Pipe
Hangers
Safestretch™ Expandable Web
Lanyard
Strut
Anchors
Help prevent workers from using incorrect
gear for tie-back by specifying this
”official” tie-back lanyard from SafeWaze
Specially produced, TyBak lanyards
incorporate SafeStop Absorbers and are
boldly imprinted to indicate to workers
they are approved to be used as a tieback. Allows the worker to adjust the
length of the lanyard to fit the work
environment.
Fasteners
Fall Protection / Lanyards & Positioning
Nylon webbing
Length: 3 feet
#3550-0241
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Steel Auto-lock
Carabiner
Boston , MA
800-645-6155
Safety
2.75” Swivel Rebar Hook, 2 Double Locking Snap hooks .
Nylon webbing
Length: 4 feet
#0210
#3550-4-0241
Nylon webbing
Length: 4 feet
Hartford, CT
800-969-0285
603
Rentals
#SP3710-S 13-Link Chain
Assembly
Fasteners
Fall Protection / Anchorage
Anchors
4550-U
4550-A
Strut
Manuclave Industrial Anchor
Cross Arm Straps
Part No.
Description
Threaded
Rod
4550
4550-3
4550-A
4550-E
4550-SCS-4
4550-SCS-6
4550-U
6' cross arm strap with 1.75" webbing
Same as 4550, 3' Cross Arm Strap
Convenient Cross Arm Strap ideally suited for
quick installation. Adjustable feature ensures
handling all applications. Adjusts from 4' to 6'.
6 ft., 400 lb. Cross Arm Strap
4' Cable Pass Thru Cross Arm Strap
6' Cable Pass Thru Cross Arm Strap
Heavy-Duty Cross Arm Strap with Abrasion Padding
Spring-loaded, stainless steel design opens by hand. Lightweight and easy
to install.
Part No.
252
251
Description
6" Manuclave
3" Manuclave
Pipe
Hangers
BeamWalk I-Beam Anchor
Scaffold Anchorage
Cross arm strap for scaffolding. 18" long, fits 3" maximum structure and
rated round tubing
Tools
4551
Part No.
4650-2
Description
Part No.
Mobile anchor. Fits 3 1/2” to 14” Beams with a maximum thickness of
1-1/4". Lightweight, low-friction design allows smoother movement.
Description
BeamWalk I-Beam Anchor
Scaffold Anchorage
Abrasives
Concrete Cross Arm Straps
Girder Grip
Excellent temporary anchorage solution for
concrete forming work, designed to be cut and
removed upon completion of job
Mobile Anchor. Fits 3/4" diameter hole. Use either
horizontally or vertically.
Part No.
4007
Part No.
Description
4823
4824
4825
Description
Girder Grip
48" L, 2" Web Width, Incl. Steel D-ring, wear
pad and soft loop
Same as 4824, w/o wear pad
Same as 4823, w/ (2) soft loops
OnSite
Supply
SafeClaw Concrete Anchor
Safety
The SafeClaw is a state-of-the-art removable anchor point
which is ideal for challenging tie-off applications with few available options. Rated to 5,000 lbs. Requires 3/4" hole, 3" deep.
Easy to remove and reuse.
Part No.
4075
Rentals
604
Description
Reusable Roof Anchor
Steel construction. Fits any pich angle. Approved for metal decking
Part No.
4000
Description
Reusable Roof Anchor
SafeClaw Concrete Anchor
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
MS Web Retractable Lifelines
MS Series Web Retractables utilize a tangle-free
swivel top to promote unhindered worker mobility.
Additionally, the high strength aluminum housing
and tear-resistant 7 foot web lifeline extend the
service life of all MS Series Web Retractables. Housing attaches to anchor point with a steel carabiner.
Line hardware consists of a locking snap hook which
prevents roll-out. OSHA Approved
Description
3307
Web Retractable Lifeline
Polymer housing, with 20 foot Kevlar/Polyester Lifeline. Housing attaches to anchor point with a steel
carabiner. Line hardware consists of a locking snap
hook which prevents roll-out. OSHA Approved
RAM Fall Limiter
Lightweight and compact, the Ram Fall
Limiter is ideal for warehouse order pickers. Housing attaches to anchor point
with a steel carabiner. Line hardware
consists of a locking snap hook which
prevents roll-out. OSHA Approved
Part No.
3310
Part No.
3300
Description
Typhoon Fall Limiter
Description
RAM Fall Limiter
SafeWaze® Retractable Lifeline Series Diagrams
RLD Series
MS Series
(Tear-resistant Webbing)
MS11
MS16
MS30, MS40
& MS50
Styles
MS20
MS30, MS40
and MS50
Styles
RLD25
RLD30,
RLD40,
RLD50 &
RLD65
Style
RLD Series
RLD20 Polymer Steel cable
RLD25 Polymer Steel cable
RLD30 Polymer Steel cable
RLD40 Polymer Steel cable
RLD50 Polymer Steel cable
RLD65 Polymer Steel cable
M Series
M15 Aluminum Steel cable
M20 Aluminum Steel cable
M25 Aluminum Steel cable
M30 Aluminum Steel cable
M40 Aluminum Steel cable
M50 Aluminum Steel cable
M65 Aluminum Steel cable
M75 Aluminum Steel cable
M100 Aluminum Steel cable
M130 Aluminum Steel cable
M160 Aluminum Steel cable
M190 Aluminum Steel cable
MS Series
MS11 Metal Alloy Web*
MS16 Polymer Web*
MS20 Polymer Web*
MS25 Polymer Web*
MS30 Polymer Web*
MS40 Polymer Web*
MS50 Polymer Web*
20’
25’
30’
40’
50’
65’
6.2
6.9
7.8
9.0
10.5
12.0
15’
20’
25’
30’
40’
50’
65’
75’
100’
130’
160’
190’
5.6
7.6
8.5
8.6
10.4
11.5
12.7
14.0
42.0
66.0
76.0
86.0
11’
16’
20’
25’
30’
40’
50’
3.6
4.5
5.6
6.3
7.6
9.2
10.8
605
Tools
RLD20
Part Case
Cable or Cable / Web Wt.
No. Material Web Mtl Length (ft) (lb)
Abrasives
M20
M30, M40, M50, M100, M130,
M65 & M75
M160, & M190
M25
Style
Style
OnSite
Supply
(Steel 3/16”
Cable)
(Steel 3/16” Cable)
Safety
M Series
M15
Threaded
Rod
Designed and engineered to ensure maximum
movement with the lightest weight. The Kevlar polyester webbing has proven abrasion resistance and
permits additional capacity over any other brand of
lightweight limiter.
Strut
TYPHOON Fall Limiter
Pipe
Hangers
Part No.
Fasteners
Anchors
Fall Protection / Retractable Lifelines
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
Rentals
*All webbing is tear resistant
Fasteners
Fall Protection / Confined Space & Rope Grabs
Anchors
Recovery System for Entry, Retrieval and Rescue
Fall protection and rescue systems for confi ned space utilize a self-contained retractable
lifeline with a built-in winch for retrieval and lowering. Tripod is aluminum with adjustable
telescopic legs.
Includes:
Strut
• 205G-50
• M10 Tripod
Additional Connections Require
0217 Pulley and 99-0210 Carabiner
Part No.
Threaded
Rod
Description
M2050
M10
205G-50
205G-75
205G-100
4500
Complete Recovery System
7' Tripod (only)
50' 3-Way Winch for Lowering and Retrieval
75' 3-Way Winch for Lowering and Retrieval
100' 3-Way Winch for Lowering and Retrieval
Tripod Carrying Bag
Pipe
Hangers
Hand Winch - Man Rated
Automatic Internal Load Lock with 65' maximum reach. No
secondary brakes or ratchets required.
Part No.
Description
M10-142G
142G
Incl. M10 7' Tripod, 65' 142G Winch
65' Winch
Tools
Carabiners / Snaps
Rope & Cable Grabs
Alternate to lanyards and retractables. Requires anchorage connector to attach rope to anchor in
most cases.
Part No.
Abrasives
117
117
0119
0210
Description
0220-1
Rope Grab
Cable Grab
All of the connecting devices listed
in this catalog meet the new 2007
ANSI Z359.1 3600 lb. standards,
unless otherwise noted as OSHA
compliant.
0119
OnSite
Supply
Part No.
Lifeline Assemblies
Safety
Constructed of 5/8” low elasticity SafeCom
polydac blended rope..
Part No.
0221-25-2
0221-30-2
0221-50-2
0221-100-2
Rentals
606
Length / Termination
25’ (2) Steel Snap hooks
30’ (2) Steel Snap hooks
50' (2) Steel Snap hooks
100' (2) Steel Snap hook
Call For Longer
Assemblies or
for Bulk Rope
Hartford, CT
800-969-0285
0220-1
0220-A
G5000-1
0241
0241-A
0240
0210
0210-A
0210-3
Boston , MA
800-645-6155
0210-A
Description
Forged Hook 3/4"
Aluminum Hook 3/4"
Stamped Hook 3/4"
Pelican Hook 2-3/4"
Alum. Hook 2-3/4"
Chrome Hook 2-1/4"
Lg Steel Autolock
Carabiner 1"
Alum. Autolock
Carabiner 1-1/4"
Tear-Drop Lg Steel
Autolock Carabiner
3" Opening
Washington D.C.
877-419-2755
0241
0210-3
Philadelphia, PA
610-647-8070
Soft® Blasts™ Foam Earplugs
• NRR 29
• Most popular earplug in the
world.
• Moisture-resistant,
dermatological safe foam is nonirritating.
• Slow recovery foam provides
comfort with low pressure.
• NRR 33 - The highest NRR Available
• The world's softest earplug.
• Moisture-resistant, dermatological
safe foam is non-irritating.
• Exciting designs and brillant
colors
• Self-adjusting foam provides
low pressure with excellent
attenuation.
310-1001 E-A-R Classic Earplug, Pillow Pack, 200 per box
311-1101 E-A-R Classic Corded Earplug, 200 per box
312-1252 E-A-R Soft Yellow Neon Blasts, Uncorded, 200/ box
311-1252 E-A-R Soft Yellow Neon Blasts, Corded, 200/ box
UltraFit® Reusable Earplugs
• NRR 33
• Fun colors "spark" up hearing protection
programs.
• Soft, low pressure foam for extra comfort.
Part No. Description
3001732 Spark Plugs Earplug, Corded, 100 per box
Pipe
Hangers
• NRR 25
• Patented flange design gives
the most comfortable fit of any
reusable earplug.
• Conforms to oval shape of ear.
• Washable.
• No rolling or touching of plug
portion during insertion.
Spark Plugs™ Foam Earplugs
Fasteners
Part No. Description
Threaded
Rod
Part No. Description
Strut
Classic Foam Earplugs
Anchors
Hearing Protection / Rainsuits / Boots
Part No. Description
340-4004 UltraFit Plugs, Corded, 50/ box
Part No. Description
3005542 RED-E-FIT, Uncorded, 200/ box
Part No.
Description
Size
1CP-0059
Slush Boot
8 thru 16
Onyx 26™ Earmuff
• NRR 26
• For medium noise environments.
• Lightweight, durable and
economical.
• Ultra-soft ear cushions for comfort
and extended wear.
• Ball & socket pivoting cup
attachment provides optimum
pressure distribution for maximum
noise reduction.
Rain Suits
• .25 mm durable PVC
• Available in sizes L-5X
• 3-piece suit includes:
jacket, detachable hood
and pants
Part No. Description
70801
Part No. Description
Rainsuit
Abrasives
High-visibility, seventeen inch, yellow latex
boot features a rubber top strap and
buckle for a snug protective fit. Sole is
deeply grooved for a sure grip. The deep
seated heel is fully cut to fit over work
boots. Available in sizes 8 - 16. Please
order 1 - 2 sizes larger than your shoe size
for best fit.
OnSite
Supply
NRR 32
Soft foam conforms to the ear.
Tapered shape for easy insertion.
Comfortable design for extended
wear.
• Individually wrapped, one pair
per bag.
Safety
Overshoe Slush Boot
•
•
•
•
Tools
Rainsuits / Slush Boots
RED-E-Fit Foam Earplugs
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
607
Rentals
3015086 Onyx 26 Earmuff
Fasteners
Eye Protection
Anchors
Strut
Threaded
Rod
Virtua V6™ Safety Glasses
Virtua V4™ Safety Glasses
Sport Styling
Sleek Styling
Meets ANSI Z87.1
Sport inspired, unisex styling
Integral browguard
Soft temple tips for all day comfort
Universal fit nosebridge
Hard coat polycarbonate lens blocks
99.9% UV and guards against scratching,
static and chemical attack
• 10 per box
• Meets ANSI Z87.1
• Sleek - Styling for both men and women
• Soft, dual injected temples for increased comfort
• Universal nose bridge
• Polycarbonate lens blocks 99.9% UV
and guards against scratching, static
and chemical attack
• 10 per box
•
•
•
•
•
•
Part No.
Lens
Part No.
11680
Clear, Hard Coat
11681
Gray
11684
Indoor/Outdoor Mirror
Lens
Virtua™ Safety Glasses
Economical Protection
•
•
•
•
Meets ANSI Z87.1
Sleek - Styling for both men and women
Lightweight - Less than 1 oz.
Contoured flexible temples for a
comfortable fit
• Hard Coat guards against scratching,
static and chemical attack
• 10 per box
Part No.
Lens
11326
Clear, Hard-coat
11674
Indoor/Outdoor Mirror
11329
Clear, Anti-fog
11327
Gray, Hard-coat
11328
Indoor/Outdoor Mirror
11331
Blue Mirror
Pipe
Hangers
11672
Clear, Anti-Fog
Tools
Abrasives
Virtua V5™ Safety Glasses
QX1000
Safety Glasses
X-Sport™ Safety Glasses
Extreme Comfort, Style
& Performance
OnSite
Supply
• Meets ANSI Z87.1
• Black, sport grip temples fit more head
sizes
• Sleek, sculpted look
• Adjustable lens angles and adjustable
universal fit nosebridge
• Features DX™ Anti-fog hard coat to resist scratching, static & chemical attack
• 10 per box
Safety
Part No.
Clear, Hard Coat
15177
Gray
15178
Indoor/Outdoor Mirror
Rentals
Part No.
12101
Lens
Clear
Lens
15176
608
• Meets ANSI Z87.1
• Dual 9 Base Lens - Ultimate wrap
coverage
• DX™ Anti-fog Hard Coat
• Sleek, Adjustable Black Temples for
Ultimate Comfort
• Made in the USA
• 10 per box
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Adjustable Temples
• Meets ANSI Z87.1
• Adjustable temple length and lens angle
• Wraparound lens provides superior
protection
• Soft, universal nose bridge
• Hard coat polycarbonate lens blocks
99.9% UV and guards against scratching, static & chemical attack
• 10 per box
Part No.
Lens
11675
Clear, Hard Coat
11679
Indoor/Outdoor Mirror
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Eye Protection
Part No.
Meets ANSI Z87.1
Clear lens
Soft-tip, adjustable temple length
3-Position lens adjustment and adjustable universal fit nosebridge
• With Reader Lenses from 1.5 to 2.5
diopter
• Features DX™ Anti-fog hard coat to resist scratching, static & chemical attack
• 10 per box
Lens
Part No.
Diopter
Wide angle for better vision
Critical sight for critical work, the WeldView Goggle is designed to give welders an
optimal viewing range during gas-welding,
burning, cutting, brazing or furnace work.
Optional cover plates give added versatility.
Features include:
• Meets ANSI Z87.1
• Soft Side and Lift Front Wide Vision
• Standard Shade 5 FILTERWELD™ Lens
• Optional Clear Polycarbonate Cover
Plate
12135
Clear, Hard Coat
11374
1.5
12137
Gray
11375
2.0
Part No.
11376
2.5
40750-00020
Strut
•
•
•
•
WELDVIEW® Goggles
Threaded
Rod
Sleek, Sport Styling
• Meets ANSI Z87.1
• Sporty, contemporary look
• Distortion-free, excellent viewing range,
top to bottom, side to side.
• Adjustable length temples for comfort
and fit
• Features DX™ Anti-fog hard coat to resist scratching, static & chemical attack
• 10 per box
Designed to Fit Perfectly
Lens
Shade 5
Pipe
Hangers
SX™ Series Safety Glasses
BX™ Readers Safety Glasses
Cover Plates
44932-00000
Clear
Polycarbonate Welding Plates
Shade 10
84912-00000
Shade 12
Tools
84910-00000
• Meets ANSI Z87.1
• Durable, flexible and comfortable
• Protection for chipping, cutting or ligth
grinding applications
• Indirect venting provides chemical
splash protection
• Fits over most eyewear
• Polycarbonate lens blocks 99.9% UV
and optional DX™ anti-fog hard coat
guards against scratching, static &
chemical attack
• Made in the USA
• 10 per box
Part No.
Lens
13250
Clear, Hard Coat
Part No.
13251
Bronze
40815
Clear
13253
Amber
40802
Clear, Anti-Fog
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Lens
Boston , MA
800-645-6155
OnSite
Supply
Impact/Chemical Resistant
Goggles
Lens Cleaning Towelettes
• Wall Mount
• For Glass, plastic and polycarbonate
lenses, goggles and visors
• Anti-fog, anti-static formula
• 100 individually package towelettes
per box
Safety
• Meets ANSI Z87.1
• Extended coverage for wider faces
• Superior orbital eye coverage. Virtually no area of the eye is exposed to
particulates
• Adjustable Temple length
• Sleek, sculpted look
• 3-Position lens adjustment and adjustable universal fit nosebridge
• Ventilation channel helps prevent fog/
heat buildup
• Features DX™ Anti-fog hard coat to resist scratching, static & chemical attack
• • 10 per box
Part No.
3000555
Hartford, CT
800-969-0285
609
Rentals
Prescription-Quality Clarity
Abrasives
Maxim™ Safety Glasses
Fasteners
Head Protection / Hard Hats
Anchors
Sentry III™ Cap
American Allsafe Hard Hats
•
•
•
•
No. 14011
Ratchet holds cap in place for secure fit
Pin-lock model has wide nape strap for secure fit
Universal slots accommodate hearing, welding and faceshield accessories
Comfortable six-point nylon suspension with CoolmaxCM terrycloth sweatband
Strut
Ratchet Suspension
Description
White
Yellow
Dark
Blue
Dark
Green
Red
Sentry III (SNIII) w/pin-lock
Sentry III (SNIII) w/ratchet
14022
14024
14009
14011
14053
14055
14045 14063
14047 14065
Gray
Orange
Hiviz
Orange
Replacement
Suspension
14031
14033
14071
14073
14099
14101
14429
14431
Threaded
Rod
V-Gard® Protective Caps and Hats
Pipe
Hangers
Comfortable, lightweight protection
V-Gard protective caps and hats from MSA consist of a
polyethylene shell and suspension system working together as a
protection system. V-Gard headwear features advanced styling
in either cap or hat styles, with the cap available in three sizes:
small (6 to 7-1/8), standard (6-1/2 to 8) and large (7 to 8-1/2).
Tools
V-Gard caps and hats meet or exceed the applicable
requirements for a Type I helmet (top impact) as outlined in
ANSI Z89.1 1997, Class E and G (formerly Class B and A).
V-Gard caps and hats are not specifically designed to protect
against lateral blows from the front , side, or rear. MSA’s
Vanguard™ protective helmets are so designed and must be used
if lateral protection is desired. For more information, contact
your MSA distributor.
Defender® Faceshield Frames and MSA Visors
All frames come without visors.
Abrasives
OnSite
Supply
Safety
with Staz-On
Suspension
with Fas-Trac
Suspension
with Uni-Pro
Suspension
463942
475358
10004760
White
463943
475359
10004762
Blue
463944
475360
10004761
Yellow
463945
475361
10004767
Orange
463947
475363
10004763
Red
463946
475362
10004765
Green
463948
475364
10004766
Gray (navy)
488148
488146
10004764
Hi-Viz Orange
815558
815565
—
Hi-Viz Lime
Green
464852
475365
—
Gold
463111
495853
—
Robin’s Egg
Blue
464658
495854
—
Brown
Type
Color
Size
Part No.
10025639
—
—
Granite
Acetate
Clear
8" x 16" x .004"
488133
Rentals
610
Hartford, CT
800-969-0285
Color
Defender™ Frame with Slim
Pro Plus Muff Assembly
Defender™ Frame with
Visor for V-Gard Caps
Part No.
Description
Defender Faceshield Frames
10021614
for medium V-Gard Caps
10021616
for all MSA Slotted Caps not equipped with
lock down clip
Ear Muff Accesory for Defender Frame
10026398
Sound Blocker 26 (26 NRR)
10026460
Slim Pro Plus (23 NRR)
Visors
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
ATLANTA FALCONS
1MS006902
(Black)
ARIZONA CARDINALS
1MS006901
(White)
BALTIMORE RAVENS
1MS006903
(Black)
CINCINNATI BENGALS
1MS006907
(Orange)
CLEVELAND BROWNS
1MS006908
(Orange)
DALLAS COWBOYS
1MS006909
(Silver)
DENVER BRONCOS
1MS006910
(Blue)
DETROIT LIONS
1MS006911
(Silver)
GREEN BAY PACKERS
1MS006912
(Yellow)
INDIANAPOLIS COLTS
1MS006913
(White)
JACKSONVILLE JAGUARS
1MS006914
(Black)
MIAMI DOLPHINS
1MS006916
(White)
MINNESOTA VIKINGS
1MS006917
(Purple)
NEW ENGLAND PATRIOTS
1MS006918
(Silver)
NEW ORLEANS SAINTS
1MS006919
(Gold)
NEW YORK JETS
1MS006921
(White)
OAKLAND RAIDERS
1MS006922
(Silver)
PHILADELPHIA EAGLES
1MS006923
(Robin’s Egg Blue)
PITTSBURGH STEELERS
1MS006924
(Black)
SAN FRANCISCO 49ers
1MS006926
(Gold)
SEATTLE SEAHAWKS
1MS006927
(Silver)
ST. LOUIS RAMS
1MS006928
(Black)
TAMPA BAY BUCCANEERS
1MS006929
(Brown)
KANSAS CITY CHIEFS
1MS006915
(Orange)
NEW YORK GIANTS
1MS006920
(Blue)
SAN DIEGO CHARGERS
1MS006925
(Purple)
TENNESSEE TITANS
1MS006930
(White)
Fasteners
Anchors
Strut
CHICAGO BEARS
1MS006906
(Blue)
Threaded
Rod
CAROLINA PANTHERS
1MS006905
(Silver)
Pipe
Hangers
BUFFALO BILLS
1MS006904
(Red)
Tools
Wear them at work, at home or even at the game! The NFL line of V-Gard Caps with the comfortable, strap-adjustable Staz-On suspension
offers superior quality, comfort and protection. NFL v-Gard caps meet or exceed all applicable requirements for ANSI Z89.1-1997 for a
Type I helmet. Safety directors appreciate how these caps compliment their safety programs. With more workers inclined to wear them,
they can improve worker acceptance. Standard with Staz-On suspension. Please specify Team when ordering.
Abrasives
Officially-Licensed NFL V-Gard® Helmets
OnSite
Supply
Head Protection / Hard Hats
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
WASHINGTON REDSKINS
1MS006931
(Red)
611
Rentals
Now, in addition to custom logo imprinting in up to four separate colors, MSA offers
the Image 2000 Service. Using a digital file (disk or CD) or a photo for scanning,
MSA can reproduce your image on the front, back or sides of white V-Gard caps
and hats. Use the Image 2000 Service to print a photo of your company headquarters, picture of a new site for groundbreaking celebrations or a product illustration.
Note: To ensure top quality reproduction, Image 2000 Service is only available
on white V-Gard products.
Safety
Logo Express Service
Print Photographic Images On Your V-Gard!
Fasteners
Respiratory Protection / Disposable Respirators
8210 N95 Particulate
Anchors
Designed to help provide comfortable, reliable worker protection against certain non-oil
based particles. Its lightweight construction helps promote greater worker acceptance
and comfort and increased wear time. Adjustable nose clip and 3M’s Advanced Electret
Media help provide a custom fit and secure seal. NIOSH certified as being at least
95% efficient at removing solid and liquid particles (excluding those containing oil). 20
respirators to a box, 8 bx./cs. Meets NIOSH 42CFR84 N95 requirements.
8210PLUS N95 Particulate
Strut
Same features as the 8210. Includes NEW comfortable braided headbands and staplefree attachment. 20 respirators to a box, 8 bx./cs. Meets NIOSH 42CFR84 N95
requirements.
8000 N95 Particulate Economy Respirator
An economical choice for light duty or short duration applications. Includes two-strap
design with single point attachment and adjustable nose clip to reduce eyewear fogging
and helps ensure a better seal and fit. 20 respirators to a box, 12 bx./cs. Meets NIOSH
42CFR84 N95 requirements.
Threaded
Rod
Pipe
Hangers
8212 N95 Welding
Tools
8511 N95 Particulate
Abrasives
Uniquely designed to help provide
protection. It is ideally suited for work
settings that involve heat, humidity, or
long periods of wear. Features the added
comfort and durability of the 3M™ Cool
Flow™ Exhalation Valve and adjustable
nose clip to help provide a custom fit and
secure seal. NIOSH certified as being at
least 95% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
Meets NIOSH 42CFR84 N95 requirements.
Designed for applications such as welding,
soldering and other operations where
metal fumes may be present. It features
the 3M™ Cool Flow™ Exhalation Valve,
cake-resistant filter media, a comfortable
face seal and fully adjustable straps Foam
face seal ring for long lasting comfort.
NIOSH certified as being at least 95%
efficient at removing solid and liquid
particles (excluding those containing oil).
10 respirators to a box, 8 bx./cs. Meets
NIOSH 42CFR84 N95 requirements.
8514 N95 Welding
Recommended for welding on aluminum,
stainless steel, galvanized steel and other
applications where ozone and nuisance
level organic vapors are present (below
OSHS PEL). NIOSH certified as being at
least 95% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
Meets NIOSH 42CFR84 N95 requirements.
OnSite
Supply
Dust/Nuisance Mask
This dust mask provides economical
protection and relief from common
nuisance dusts. Do not use when dust
concentrations are greater than OSHA
PEL. Not rated. 50/bx., 20bx./cs.
Safety
Part No.
Description
AMA3005846
Rentals
612
Hartford, CT
800-969-0285
Nuisance Respirator
Boston , MA
800-645-6155
8233 N100 Particulate
Ideal for non-oil metal fume exposures to
OSHA substance specific particles such as
lead and cadmium up to 10X the OSHA
PEL.. NIOSH certified as being at least
99.97% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
NIOSH Approval TC-85A-1298.
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
6000 Series Easi-Air Respirators
Silicone half mask respirator has a four-point strap assembly to properly balance
facepiece, won’t snag hair. Low profile design facepiece is molded to fit a variety of facial
features with greater comfort. Extra large inhalation and exhalation valve provides easier
breathing. NIOSH/MSHA approved.
Part No.
Strut
Silicone, full facepiece respirator is soft and pliable for a comfortable fit. Double flap
face seal and six easy-adjusting straps provide superior comfort and protection. Large,
scratch-resistant polycarbonate lens faceshield provides good visibility. 100% Teflon®
speaking diaphragm allows exceptionally clear communications. NIOSH/MSHA approved.
Description
Half Facepiece Respirator, Size Medium
Half Facepiece Respirator, Size Large
Threaded
Rod
6200
6300
Fasteners
Anchors
Respiratory PRotection / Air Purifying
Series 6000 Cartridges & Filters
Notes*
6001
Organic Vapor 2/pk.
Organic Vapors of not more than 1000 ppm
2,3
6002
6003
6004
Acid Gases 2/pk.
Organic Vapors,
Acid Gases 2/pk.
Ammonia,
Methylamine, 2/pk.
Chlorine, Hydrogen Chloride, Sulfur Dioxide,
Formaldehyde
Organic Vapors, Chlorine, Hydrogen Chloride,
Sulfur Dioxide, Formaldehyde
Ammonia, Methylamine
2
6005
Formaldehyde, 2/pk.
Formaldehyde
2,3,4
6006
Multi-Gas Vapor
2/pk.
Organic Vapors/Chlorine/Chlorine Dioxide/Hydrogen
Chloride/Sulfur Dioxide/Hydrogen Fluoride/Hydrogen Sulfide
2,3
6009
Mercury Vapor/
Chlorine, 2/pk.
Mercury Vapor/Chlorine
TC-23C-1775
2,3
60921
Organic Vapor
Cartridge/Filter, 2/pk.
P100, Solid and liquid aerosols and particles,
including those containing oil.
2,3
60922
Multi-Gas/Vapor
Cartridge/Filter, 2/pk.
P100, Solid and liquid aerosols and particles,
including those containing oil.
2,3,4
60923
Mercury Vapor/
Chlorine Gas, 2/pk.
P100, Solid and liquid aerosols and particles,
including those containing oil.
2,3,4
2071
Particulate Filter
2/bg.
P95, solid and liquid aerosols and particles,
including those containing oil.
2,3
2091
Particulate Filter
2/bg.
P100, solid and liquid aerosols and particles,
including those containing oil.
2,3,4
2097
Particulate Filter
2/bg./10/pk.
P100, with nuisance level Organic Vapor Relief
and Ozone Protection. Including those containing oil.
2,3,4
501
Filter Retainer, Pair
For use with chemical cartridges, 2 required
2,4
Pipe
Hangers
Approved For
2,3
Tools
2,3
Abrasives
OnSite
Supply
Part No.
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
613
Rentals
1. Do not use in atmospheres containing less than 19.5 % oxygen, in atmospheres containing gases or vapors or in atmospheres immediately
dangerous to life and health.
2. Do not use in atmospheres containing less than 19.5 % oxygen, or in atmospheres immediately dangerous to life and health.
3. Do not wear for protection against organic vapors with poor warning properties or those which generate high heats of reaction with
the sorbent material in the cartridge.
4. P100 filters are 99.97 percent efficient against 0.3 micron DOP.
Safety
*Notes
Fasteners
Hand Protection / Gloves
Leather Palm Work Gloves
Anchors
Strut
Tillman™
Tillman™
Tillman™
Threaded
Rod
Double Leather Palm
Work Gloves
Winter Work Gloves
Lined Leather Palm w/Safety Cuff
Rugged, blue select shoulder cowhide palm
and knuckle strap Yellow canvas back.
ColdBlock™ poly/cotton lined for added
warmth. Waterproof lining keeps hands
dry. Heavy duty safety cuff. Size: Large
Pipe
Hangers
Part No.
Size
Standard Shoulder split Cowhide Double
palm and knuckle strap. Canvas back. Gunn
cut with 2 1/2" rubberized Safety cuff. Locked
stitched for added strength. Size: Large
Part No.
Large
1568
2-1/2" Safety Cuff
1515X
Size
Large
Leather Palm Work Gloves
2-1/2" Safety Cuff
Industrial grade, shoulder split cowhide palm
and knuckle strap Canvas back. Gunn cut
with 2 1/2" rubberized safety cuff Locked
stitched for added strength. Size: Large
Part No.
Size
1505XX
Large
1505XL
Extra Large
Tools
Abrasives
OnSite
Supply
Tillman™
Welding Gloves
14" Split Leather
Safety
Pearl, Shoulder split Cowhide. 14” length.
Cotton lined for comfort. Welted fingers
protect cotton stitching. Locked stitched
with cotton thread. Size: Large
Part No.
Size
Rentals
1000B
Large
614
Tillman™
Tillman™
Leather Palm Work Gloves
Knitwrist
Economy shoulder split cowhide palm.
Clute cut cotton back, knit wrist. Locked
stitched for added strength. Size: Large
Part No.
1512
Hartford, CT
800-969-0285
Size
Large
Boston , MA
800-645-6155
Leather Palm Work Gloves
4-1/2” Gauntlet Cuff
Industrial grade, shoulder split cowhide palm
and knuckle strap Canvas back. Gunn cut
with 4-1/2” rubberized gauntlet cuff Locked
stitched for added strength. Size: Large
Part No.
1509
Size
Large
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Strut
Anchors
Leather Drivers Gloves
Fasteners
Hand Protection / Gloves
Tillman™
Tillman™
Leather Drivers Gloves
Leather Drivers Gloves
Lined, Top Grain Pigskin
Top grain pearl cowhide palm, bourbon
Cowhide split leather back. Unlined. Keystone thumb. Double stitching on forefinger provides extra strength. Sizes: Large,
X-Large
Tough, top grain pearl pigskin. Naturally
resistant to wet and oily conditions. Thinsulate™ lined for added warmth. Gunn cut,
Keystone thumb. Size: Large
Part No.
Size
1400M
Medium
Part No.
Size
Part No.
Size
1400
Large
1414L
Large
1419
Large
1400XL
X-Large
1414XL
X-Large
Threaded
Rod
Economy Split Leather
Pearl cowhide split. Unlined. Gunn cut,
Keystone thumb for easy movement. Double stitching on forefinger provides extra
strength. Sizes: Medium, Large, X-Large
Tillman™
Pipe
Hangers
Leather Drivers Gloves
Abrasives
Tools
Mechanic's Gloves
Tillman™
Truefit™ Mechanic’s
Leather Work Gloves
Tillman™
Winter Work Gloves
Tillman™
Truefit™ Mechanic’s
Leather Work Gloves
Premium Goatskin
Top grain goatskin and spandex design.
Double leather palm, reinforced thumb,
smooth leather finger tips and leather
side bolsters. Elastic cuff. Sizes Large and
X-Large.
Part No.
Size
Part No.
Sizes
Part No.
Sizes
1584
Large
1490L
Large
1470L
Large
1584XL
Philadelphia, PA
610-647-8070
X-Large
1490XL
Washington D.C.
877-419-2755
X-Large
Boston , MA
800-645-6155
OnSite
Supply
Top grain Goatskin construction for the
best dexterity. Leather and spandex design
will outlast and outperform all-synthetic
high dexterity gloves. Double palm and
thumb for longer life and better gripping
power. Double reinforced fingertips. Longer
elastic cuff with hook and loop closure
provides secure fit and more support. Top
grain leather side bolsters add additional
protection for side surface work. Breathable finger design wicks away moisture.
Sizes Large and X-Large
X-Large
1470XL
Hartford, CT
800-969-0285
Safety
Polar fleece offers a lightweight and warm
alternative for winter work gloves. Soft and
luxurious feeling, the integrated ColdBlock™
lining keeps the draft off your fingers. Rugged leather palms will take plenty of abuse.
Elastic at the wrist keeps out the cold and
snow. Rugged blue cowhide split palm.
Soft, comfortable and warm gray polar
fleece with ColdBlock™ lining. Elastic wrist
for snug fit, keeps out the cold. Sizes Large
and X-Large
Premium Goatskin
615
Rentals
Polar Fleece w/ Leather Palm
Fasteners
Hand Protection / Gloves
Cotton Work Gloves
Anchors
Strut
Tillman™
Tillman™
Tillman
™
#153 Canvas Work Gloves
8 oz. Cotton
Threaded
Rod
8 oz. cotton Canvas. Knit wrist. Size Large
#1533 Cotton Work Gloves
#1532 Cotton Work Gloves
8 oz. String Knit w/ PVC Dots
Knit Cotton String
8 oz. string knit cotton. PVC Dots on both
sides of each hand. Knit wrist. Size Large
8 oz. cotton/polyester string knit. Knit
wrist. Universal size. Sold per dozen only
Pipe
Hangers
Tillman™
Tools
Tillman™
#1539 Cotton Work Gloves
Economy Latex Dipped String Knit
Abrasives
Economy latex dipped string knit. Light
texture red latex coating. Provides added
abrasion, snag and cut resistance for light
duty applications. Size Large
#1760L Cotton Work Gloves
Premium Latex Dipped String Knit
Tillman™
Premium latex dipped string knit. Textured
blue latex coating Stretch fabric cotton liner.
Excellent dexterity and feel. Size Large
#962L Kevlar Knit Gloves
with PVC Dots
Cut-Resistant Protection
Standard weight 100% Kevlar® knit. PVC
dots on both sides for better gripping. Knit
wrist. Provides added cut and abrasion
resistance. Men’s Large
OnSite
Supply
Don't See Your Glove
Here?
Give us a call!
Safety
Our Sales Team can find
your glove and save you
money!
Tillman™
Tillman™
#1545 Brown Jersey Gloves
#1541 Brown Jersey Gloves
9 oz. brown jersey. Red fleece lining for
added warmth. Knit wrist. Size Large
Economy, 9 oz. brown jersey. Knit wrist.
Unlined. Size Large.
9 oz. Lined Cotton Jersey
Rentals
616
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
9 oz. Unlined Cotton Jersey
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
34-875
Tillman™
Tillman™
#1714 PVC Coated
Work Gloves
Disposable Latex Gloves
Part No.
14" Guantlet
Single dip economy PVC coated. 14" length.
Smooth finish Interlock lining. Size Large
Size
813-2500
Large
127-5050
X-Large
Cold Weather Gloves
Part No.
Size
34-874L
Large
Coated Palm &
Fingertips
34-875M
Medium
Coated Palm &
Full Fingers
34-875L
Large
Coated Palm &
Full Fingers
Tillman™
Tillman™
Winter Work Gloves
Tillman™
#1545
Brown Jersey Gloves
9 oz. Lined Cotton Jersey
9 oz. brown jersey. Red fleece
lining for added warmth. Knit
wrist. Size Large
Philadelphia, PA
610-647-8070
Polar Fleece/Leather
Palm Gloves
See complete description on
page 615.
Part No.
Size
1584
Large
1584XL
Washington D.C.
877-419-2755
Coating
X-Large
Tillman™
#1419 Leather
Drivers Gloves
Lined, Top Grain Pigskin
Tough, top grain pearl pigskin.
Naturally resistant to wet and
oily conditions. Thinsulate™ lined
for added warmth. Gunn cut,
Keystone thumb. Size: Large
Boston , MA
800-645-6155
Threaded
Rod
Pipe
Hangers
Tools
Applications:
Used in applications which require a
high degree of dexterity and sensitivity,
especially where grip is important, such as
handling small oily parts and components,
general assembly, machining, micro-engineering, automotive components, painting,
horticulture.
Abrasives
Large
012-92675XL X-Large
Disposable Latex gloves feature: 5 mil.
Ambidextrous. Non-sterile. Packed 100 per
box. Sizes Large and X-Large
G-Tek® MaxiFlex™, black micro-foam nitrile
coated palm & finger tips, gray seamless
knit nylon liner.
• Ultra cool and very comfortable to
wear, breathable coating keeps hands
cool and dry
• Excellent dexterity, sensitivity and
tactility
• Designed to produce minimal lint and dust
• Minimal penetration (strike through) keeps
the liner soft on the inside of the glove
• Silicone free
Size
012-92675L
Micro-Foam Coated Nitrile
OnSite
Supply
Part No.
Single dip economy PVC coated. Smooth
finish. Interlock lining, knit wrist. Size: Large
#1568 Winter
Work Gloves
Lined Leather Palm w/
Safety Cuff
Blue select shoulder cowhide
palm and knuckle strap, yellow
canvas back. Lined for added
warmth. Waterproof lining
keeps hands dry. Heavy duty
safety cuff. Size: Large
Hartford, CT
800-969-0285
617
Safety
TNT Blue disposable nitrile gloves are
durable yet soft for improved comfort.
Features textured fingers for exceptional
grip. Available lightly powdered. 5 mil, 100
per box. Sizes Large and X-Large.
MAXIFLEX™ Seamless Gloves
Rentals
Disposable Nitrile Gloves
PIP
Knit Wrist
Strut
34-874
#1700 PVC Coated
Work Gloves
Ansell
Fasteners
Coated Gloves
Anchors
Hand Protection / Gloves
Fasteners
Winter Liners / First Aid
Eye and Skin Flush Stations
Industrial First Aid Kits
Anchors
Strut
Threaded
Rod
PacKit Eye and Skin Flush formulation is a sterile, isotonic,
buffered solution
that works to
neutralize the
effects of acids and
alkalis while flushing
away chemicals,
foreign particles
and irritants from
the eye. The 1 oz
and 4 oz eye flush
sizes come in squirt
bottles that are
packaged for use in
first aid kits. Where the risk of chemical splash is present, a 32
oz station can be kept right at hand for immediate personal use
during transport to a 15 minute fixed flow facility. The dual 16
oz bottle station is ideal for construction sites or other remote
locations. If one bottle is used, the second stays on the job until
the other can be replaced.
Pipe
Hangers
Part No.
Contents
8FU-0029
8FU-0143
8FU-0056
8FU-0055
8FU-0067
8FU-0057
1 oz Eye Flush
4 oz Eye Flush
2-16 oz with station
16 oz Refill
1-32 oz with station
32 oz Refill
Winter Liners
For smaller facilities or offices, or
use in vehicles or job sites, you can
find the First Aid kit that fits your
need. Each kit provides components
for treating 10, 25, 50 or 100
employees. All contents are neatly
packaged and are easy to locate,
use and replace. No.10 and No. 25
kits are packed in polypropylene
weatherproof case; No. 50 kit has a
weatherproof steel case: No.100 features a steel case. All cases
are suitable for wall mounting or carrying to the treatment site.
Contents:
#10
# 25
• Adhesive strips
16
50
• Large wound dressing pack -
1
• Gauze Pads
4 (3”) 5 (4”)
1
• Gauze Bandage, 4”
1
• Eye Pads
2
2
• Adhesive Tape, 1/2” x 5 yd 1
1
• Triangular Bandage
1
1
• Elastic Bandage
-
-
10
• Antiseptic Towelettes
10
• First Aid/Burn Cream, 7/8 oz -
1
• Aspirin
10
10
• Eye Flush
1 (1 oz) 1 (1 oz)
• Cold Pack
-
1
• Latex Exam Gloves
2 pair 2 pair
1
• Scissors
1
• Forceps
1
1
1
• First Aid Instructions
1
Tools
Part No.
NEFPAC6410
NEFPAC6430
NEFPAC6450
NEFPAC6135
10 Person First Aid Kit
25 Person First Aid Kit
50 PErson First Aid Kit
100 Person First Aid Kit
#50
#100
100
200
2
4
10 (4”) 25 (4”)
2
4
4
4
1
3
2
4
1 (2”) 1 (4”)
20
50
1
2
20
200
1 (4 oz) 1 (4 oz)
2
4
2 pair 10 pair
1
1
1
1
1
1
Contents
Refills
Part No.
Abrasives
Winter Helmet Liners
OnSite
Supply
Safety
225+ Quilted Liner: Blue quilted nylon
shell with fastener straps.
AA-7: Snug fit keeps wind out of cap.
Knitted Polyester.
AA-9: Full-face, cap-style liner. Knitted
Polyester
305TSL: Thinsulate inner panels and red
heavyweight fleece lining. Full head &
neck coverage with extra-wide wrapped
collar. Shoulder length liner can tuck
into jacket. 100% cotton denim exterior
with black fasteners
Part No.
Description
Rentals
3000442
3000435
3005342
3000443
3005342
618
Contents
8FU-0148 #10 Wound Dressing Pack
8FU-0149 #25 Wound Dressing Pack
8FU-0151 #25 Complete Refill Pack
8FU-0151 #50 Wound Dressing Pack
8FU-0001 Adhesive Strips, 16 per box for #10 kit
8FU-0080 Adhesive Strips, 50 per box for #25 kit
8FU-0081 Adhesive Strips, 100/box for #50 and #100 kits
8FU-0020 Triangular Bandage
8FU-0091-03 Elastic Bandage, 4”
8FU-0123 Antiseptic Towelettes, 50 per box
8FU-0008 First Aid/Burn Cream, 7/8 oz for #25, #50 & #100 kits
8FU-0049 Aspirin, 25 x 2 /box for #10, #25 & #50 kits
8FU-0131 Aspirin, 100 x 2 per box for #100 kit
8FU-0029-01 Eye Flush, 1 oz bottle for #10 and #25 kits
8FU-0061 Eye Flush, 4 oz bottle for #50 and #100 kits
8FU-0017 Cold Pack
8FU-0040 Latex Exam Gloves, 2 pr/box for #10, #25 & #50 kits
8FU-0138 Latex Exam Gloves, 10 pair/box for #100 kit
225+ Quilted Liner
AA-7 Knitted Liner
AA-9 Knitted Liner
305 TSL Knitted Liner
AA-9 Knitted Liner
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Protective Clothing
Anchors
Limited Use - Protective Clothing and Fabrics
Fasteners
Disposable Clothing / Tyvek
Protective Fabrics
Coveralls
Part No. Description
TY120S
TY125S
QC120S
Tyvek coverall, 25/case
Tyvek coverall with elastic wrists/ankles, 2/case
Poly-coated Tyvek QC, 12 per case
This unique material (a spunbonded olefin)
used for years in industry has found
broad acceptance and been proven to
give protection to workers in all walks of
industry. Tyvek offers high strength and
provides an excellent barrier to many dry
particles, including asbestos, lead dust
and radioactive dusts.
Hooded and Booted Coveralls
Warning: Although uncoated Tyvek
provides some liquid splash protection,
it is not suggested for use against liquid
chemicals or gases because chemical
permeation from continued chemical
exposure occurs quickly.
Complete with attached hood, boots, non-sparking
zipper and elastic wrists and ankles. Elastic hood
closure provides a tight seal around both half face
and full face respirators. ANSI sized for uniformity.
Poly-Coated Tyvek® QC
Available in white Tyvek, yellow poly-coated Tyvek QC,
and gray Tyvek/Saranex 23-P.
Polyethylene-coated garments provide
excellent lightweight protection from many
acids and other liquid chemicals. It is a
good choice for use in many industrial
plants and chemical clean-up operations.
Available in yellow.
Tyvek/Saranex coveralls include sock boots and boot
flap to accommodate appropriate chemically resistant
footwear.
Please specify S, M, L, XL, XXL or XXXL.
Threaded
Rod
Available in white Tyvek and yellow poly-coated Tyvek QC.
Please specify S, M, L, XL, XXL or XXXL.
Pipe
Hangers
Tyvek®
Tools
Uncoated Tyvek is also available with elastic wrists and
ankles to shut out airborne contaminants. ANSI sized for
uniformity.
Strut
Generous cut coverall open wrists and ankles for working
comfort. Features raglan sleeves for ease of movement with
full length front zipper closure for convenient on/off.
Part No. Description
Hooded Coveralls
Tyvek / Saranex® 23-P
Generous cut coverall with elastic wrists and ankles.
Features attached hood for extra protection. Full length
front zipper closure for convenient on/off. ANSI sized for
uniformity.
Tyvek/Saranex® 23-P is a laminate of
Dupont’s Tyvek and Dow Chemical’s
Saranex 23-P film. This fabric is
lightweight and offers an economical
protection against a broad array of
chemicals.
Available in White Tyvek or yellow poly-coated Tyvek
QC.
Safety
Please specify S, M, L, XL, XXL or XXXL.
Part No. Description
TY127S
QC127S
OnSite
Supply
Abrasives
Tyvek coverall, 25 per case
Poly-coated Tyvek QC, 12 per case
Tyvek hooded coverall, 25 per case
Poly-coated Tyvek QC, 12 per case
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
619
Rentals
TY122S
QC122S
Fasteners
ARC Protection CLOTHING / KITS
Anchors
HAZARD RISK
CATEGORY 3 KITS
Part
No.
Strut
Threaded
Rod
Pipe
Hangers
All kits listed
come with
33 cal/cm2
clothing, safety
helmet (52540)
and 33 cal/
cm2 Arc Hood
(52685). Kits
containing insulating gloves
include glove
protectors.
Tools
Please specify
flame resistant
clothing and
insulating glove
sizes.
Abrasives
OnSite
Supply
52700
52701
52703
52702
52787
52788
52789
52765
52766
52767
52768
52769
52940
52941
52942
52943
52944
52955
52956
52957
52970
52971
52972
52974
Safety
Glasses
Clothing
Style
Insulating
Glove
Glove
Bag
Carrying
Bag 52599
Hot
Backpack
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Coveralls
Coveralls
Coveralls
Coveralls
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Coveralls
Coveralls
Coveralls
Coveralls
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Jacket
Overalls
Coveralls
Coveralls
Coveralls
Coveralls
Class 00
Yes
Yes
No
Class 0
Yes
Yes
No
Class 2
Yes
Yes
No
No
No
Yes
No
Class 00
Class 0
Class 2
No
Class 00
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Class 0
No
No
Yes
Class 2
No
No
Yes
No
No
No
Yes
Class 00
Class 0
Class 2
No
Class 00
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Class 0
No
No
Yes
Class 2
No
No
Yes
No
No
No
Yes
Class 00
Class 0
Class 2
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
ARC Protection Clothing
62 cal/cm2
83 cal/cm2
Multi-Layer 12 oz. INDURA Ultra Soft
over 12 oz. INDURA® Ultra Soft
100 cal/cm2
Multi-Layer 12 oz. INDURA Ultra Soft
over7 oz. and 12 oz. INDURA® Ultra Soft
®
®
1-Ply 10 oz. Twaron® microfiber, 1-ply Carbon X® Felt, 1-Ply 11 oz. Carbon X® Twill
Safety
Rentals
Jacket
Size
Overall
Jacket
Size
Overall
Jacket
Size
Overall
52690
52691
52692
52693
52694
52695
52696
Medium
Large
X-Large
XXL
XXXL
XXXXL
XXXXXL
53690
53691
53692
53693
53694
53695
53696
52881
52882
52883
52884
52885
52886
52887
Medium
Large
X-Large
XXL
XXXL
XXXXL
XXXXXL
52888
52889
52900
52901
52902
52903
52904
52749
52750
52751
52752
52753
52754
52755
Medium
Large
X-Large
XXL
XXXL
XXXXL
XXXXXL
53749
53750
53751
53752
53753
53754
53755
620
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
ARC Hoods
Electrical Arc Hood
Anchors
The Flash Arc Hood incorporates UV and IR absorbing window providing protection up
to 100 cal/cm2. Past generations of gold reflective face shields only provided up to 7.33
cal/cm2 of protection, and the typical clear face shield only 1.2 cal/cm2.
Fasteners
HIGH VOLTAGE PROTECTION
The green tint window is coated with a permanent anti-fog inner surface. Code #52509
Storage Bag Available for Hood
52515
52516
52517
52543
52544
52685
52686
High Visibility Arc Hood
High Visibility Arc Hood
W/O Hard Hat
Replacement Window
Balaclava Hood
Arc Goggle
Flash Protection High Visibility
Arc Hood - Double Layered
Replacement Window
52850
52687
52688
52880
52689
52699
Flash Protection High Visibility
Arc Hood
Flash Protection Arc Hood
Replacement Window
Flash Protection Arc Hood
Flash Protection Arc Hood
Replacement Window
Hazard
Risk Cat.
Flash
Protection
2
2
21 Cal/cm2
21 Cal/cm2
2
4
4
4
21 Cal/cm2
47 Cal/cm2
38Cal/cm2
33Cal/cm2
4
4
33Cal/cm2
45Cal/cm2
45Cal/cm2
4
4
4
4
4
62Cal/cm2
62Cal/cm2
78Cal/cm2
100Cal/cm2
100Cal/cm2
Threaded
Rod
Safety
Description
Insulating Glove and Kits ASTM D120-2A
Each glove kit consists of one pair of insulating gloves, leather protectors and a storage bag.
Pipe
Hangers
Part
No.
Strut
Arc Hoods are supplied with Hard Hat Adapter and Safety Helmet.
Glove and Kits
Even though you are using insulated tools, you must still wear the required gloves. The gloves protect the hands and wrist
Low Voltage (500 V Max.) 51298
Low Voltage (500 V Max.) 51299
Low Voltage (500 V Max.) 51300
Low Voltage (500 V Max.) 51301
Low Voltage (500 V Max.) 51302
Low Voltage (500 V Max.) 51303
Low Voltage (500 V Max.) 51304
Low Voltage (500 V Max.) 51305
Low Voltage (500 V Max.) 51306
Low Voltage (1000 V Max.) 51110
Low Voltage (1000 V Max.) 51111
Low Voltage (1000 V Max.) 51112
Low Voltage (1000 V Max.) 51113
Low Voltage (1000 V Max.) 51114
Low Voltage (1000 V Max.) 51115
Low Voltage (1000 V Max.) 51116
Low Voltage (1000 V Max.) 51117
Low Voltage (1000 V Max.) 51117
Low Voltage (1000 V Max.) 51119
High Voltage (20 KV Max.) 20160
High Voltage (20 KV Max.) 20161
High Voltage (20 KV Max.) 20163
High Voltage (20 KV Max.) 20164
High Voltage (20 KV Max.) 20165
High Voltage (20 KV Max.) 20166
High Voltage (20 KV Max.) 20167
High Voltage (20 KV Max.) 20168
High Voltage (20 KV Max.) 20169
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
51291
51291
51292
51293
51293
51294
51294
51295
51295
50301
50302
50303
50303
50305
50305
50307
50307
50309
50309
20001
20003
20003
20005
20005
20007
20007
20009
20009
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22100
22200
22200
22200
22200
22200
22200
22200
22200
22200
Boston , MA
800-645-6155
52298
52299
52300
52301
52302
52303
52304
52305
52306
51100
51101
51102
51103
51104
51105
51106
51107
51108
51109
20171
20172
20173
20174
20175
20176
20177
20178
20179
Abrasives
00
00
00
00
00
00
00
00
00
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
Protector Glove Bag = Kit
OnSite
Supply
8
8-1/2
9
9-1/2
10
10-1/2
11
11-1/2
12
7
8
8-1/2
9
9-1/2
10
10-1/2
11
11-1/2
12
8
8-1/2
9
9-1/2
10
10-1/2
11
11-1/2
12
Glove
Safety
Class Description
Hartford, CT
800-969-0285
621
Rentals
Size
Tools
Employees working in areas where there are potential electrical hazards shall be provided with and shall use, electrical protective equipment
that is appropriate for the specific parts of the body to be protected and for the work to be performed. OHSA 1910.335
Fasteners
HIGH VOLTAGE PROTECTION
Tool Kits
Anchors
Meter Service Belt Pouch
(Shown) Part No.13202
Electrician’s Service Pouch
Part No. 13204
Strut
Light Weight - Fully Loaded Approximately 7 lb.
Meter Service Belt Pouch
Threaded
Rod
Pipe
Hangers
Composite Knife
1/8” x 4” Slot Composite Screwdriver
1/4” x 6” Slot Composite Screwdriver
5/16” x 6” Slot Composite Screwdriver
No. 2 x 4” Phillips Composite Screwdriver
Wire Stripper
7-1/2” Diagonal Cutter
10” Water Pump Pliers
* 8” Adjustable Wrench
9” Linesman Pliers
6” Needle Nose
Slotted Composite Holding Screwdriver
3/8” x 3” Composite Hex Nut Driver
1/2” x 3” Composite Hex Nut Driver
5/8” x 3” Composite Hex Nut Driver
Electrician's Service Pouch
14300
00813
00848
00849
00856
10080
10033
10071
10092
10006
10010
00560
00886
00888
00890
14300
00813
00848
00849
00856
10080
10033
10071
10440
10006
10010
00880
00882
00884
00886
Composite Knife
1/8” x 4” Slot Composite Screwdriver
1/4” x 6” Slot Composite Screwdriver
5/16” x 6” Slot Composite Screwdriver
No. 2 x 4” Phillips Composite Screwdriver
Wire Stripper
7-1/2” Diagonal Cutter
10” Water Pump Pliers
Fuse Puller
9” Linesman Pliers
6” Needle Nose
3/16” x 3” Composite Hex Nut Driver
1/4” x 3” Composite Hex Nut Driver
5/16” x 3” Composite Hex Nut Driver
3/8” x 3” Composite Hex Nut Driver
Flashlight and tape not included
*8” Adjustable Wrench not insulated per ASTM F1505 Standard - insulated against grounding only
Call for a full line listing of insulated tools for high voltage use
Tools
Type I Insulating Blankets & Accessories
Abrasives
Flash Protection
Arc Shields
• Permanent anti-fog coating
• Light green tint
• For use with flame-resistant clothing
Meets ASTM D1048-05 Standard
Part No.
Description
OnSite
Supply
20304 36" x 36" Class 0 Type I (1000V Max) Blanket
20305 36" x 36" Class 2 Type I (20,000V Max) Blanket
20310 Blanket Canister
20300 36" x 36" Class 2 Blanket Kit (Blanket, Clamps, & Canister)
20301 36" x 36" Class 0 Blanket Kit (Blanket, Clamps, & Canister)
20320 Blanket Clamps
20299 Magnetic Blanket Button
Part No.
Description
52510
52511
Arc Shield with Hard hat
Arc Shield only
Cal/cm2
10
10
Lightweight Flame Retardant Cotton Jackets
Safety
30" 9 oz. green firestop cotton jacket. Made
from flame retardant, 100% cotton Proban®
FR7A®. Cool comfortable, washable. Offers
protection from sudden flame exposure, light
molten splash, and sparks. Snap fasteners or
Velcro fastening system. Size S,M,L,XL,2X,3X
Rentals
622
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Part No.
Description
6230
6230V
9 oz. 30" Jacket, Snap Fasteners
9 oz. 30" Jacket, Velcro Closure
Washington D.C.
877-419-2755
Size
Philadelphia, PA
610-647-8070
Lockout / Tagout
iT’s The LAW
OshA29 CFr 1910.147(c)(5)(ii)(d) “Identifiable. Lockout
devices and tagout devices shall indicate the identity of the
employee applying the device(s).”
OshA29 CFr 1910.147(d)(4)(iii) “Tagout devices, where
used, shall be affixed in such a manner as will clearly indicate
that the operation or movement of energy isolating devices
from the “safe” or “off” position is prohibited.”
Anchors
Allows up to 6 workers to lockout
a single energy source. Constructed
of vinyl-coated high tensile steel
and plated to resist rust. Accepts
padlocks up to 3/8” shackle
diameter. Available in two sizes,
1” and 1-1/2” diameter jaws. Sold
twelve hasps per package.
Part No.
420
421
Strut
OshA29 CFr 1910.147(c)(5)(ii)(A)(2) “Tagout devices
shall be constructed and printed so that exposure to weather
conditions or wet and damp locations will not cause the tag to
deteriorate or the message on the tag to become illegible.”
Safety Lockouts Hasps
Description
Lockout, 1" diameter jaws
Lockout, 1-1/2" diameter jaws
Threaded
Rod
OshA29 CFr 1910.147(b) “Tagout Devices. A prominent
warning device, such as a tag and a means of attachment, …
to indicate that the energy isolating device and the equipment
being controlled may not be operated until the tagout device is
removed.”
Call NEFCO for ALL
your Lockout /Tagout Needs:
High visibility Lockout Stations make your locks, tags and lockouts
easy to find and use. Built for the toughest conditions. Made
of durable polycarbonate material. Available empty or stocked.
Stations are yellow with black heading with yellow lettering.
20-Lock Department Station:
When stocked, components include 20 padlocks, 48 lockout tags
and four 1” safety lockouts.
10-Lock Station:
Description
410
410LT
410KA
410KAL
410MK
410KAMK
Keyed Different. 1-1/2" Shackle
Keyed Different, 3" Extra Length Shackle
Keyed Alike, 1-1/2" Shackle
Keyed Alike, 3" Extra Length Shackle
Master Keyed, 1-1/2" Shackle
Keyed Alike, Master Keyed 1-1/2" Shackle
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
4-Lock Station:
When stocked components include 4 padlocks and 25 “Do Not
Operate” Tags and 12 lockout tags.
Safety Starter Kit
Includes (6) #3 Steel padlocks,
(one of each color), 2 #420
safety lockout hasps, (6)
71Tag ID Tags, and (6) 71SC9
attachment collars. Great
starter kit to any lockout/tagout
program.P adlocks keyed
differently.
Part No.
Description
1220DSPL Safety Starter Kit
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
623
Rentals
Part No.
When stocked components include 10 padlocks, 24 lockout tags
and two 1” safety lockouts.
OnSite
Supply
Special "Safety Lockout" markings and
labels. 1-1/2" wide, 1-3/4" tall nonconductive Xenoy™ body. Extra-long
standard steel shackle. Restricted safety
lockout 6-pin tumbler. Key retaining
feature. Eight color options: Red (RED),
Orange (ORJ), Yellow, (YLW), Green
(GRN), Blue (BLU), Teal (TEAL), Purple
(PRP), and Black (BLK). Add desired
color suffix to Part Number.
Safety
Lightweight Safety Padlock
Abrasives
Lockout Station
Tools
Pipe
Hangers
• Lockout Tags
• Tag Holders
• Lockout Hasps
• Safety Tag Centers
• Lockout Centers
• Lockout Stations
• Circuit Breaker Lockouts
• Valve Lockouts
• Gate Valve Lockouts
• Ball Valve Lockouts
• Butterfly Valves Lockouts
• Pneumatic Lockouts
• Electrical Plug Lockouts
• Switch Lockouts
• Color Coded Padlocks
• Lockout Signage
• Lockout Handbooks
Fasteners
lockouts
Fasteners
Lockout Tags
Anchors
Available Bilingual - Call
Strut
Threaded
Rod
Available Bilingual - Call
Available Bilingual - Call
Available Bilingual - Call
Pipe
Hangers
Available Bilingual - Call
Tools
Abrasives
Available Bilingual - Call
OnSite
Supply
Available Bilingual - Call
Available Bilingual - Call
Safety
Rentals
624
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Shown here a only a few of the signs that are available. Please call
for a a complete listing of signs available or with your needs. Signs
are available to ship within 24 hours. Custom signs available.
Strut
OSHA signs are the perfect way to alert
your employees and guests when a hazard
is present in your facility. Keep your facility
safe, buy an OSHA regulated sign today
and prevent an accident tomorrow. These
OSHA signs comply with OSHA 29 CFR
1910.145
Fasteners
OSHA Signs
Anchors
Construction Signage
C26
C31
C416
C433
C88
D162
D277
D656
D247
D46
D116
D656
D247
D46
D116
Abrasives
Tools
Pipe
Hangers
Threaded
Rod
C135
D248
Materials Available:
D257
Philadelphia, PA
610-647-8070
(Not all legends available in all sizes
or materials, please call)
D49
Washington D.C.
877-419-2755
Safety
.040 Aluminum
Fiberglass
Pressure Sensitive Vinyl
Rigid Plastic
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
625
Rentals
D148
3" x 5" (Pressure Sensitive Vinyl Only)
7" x 10"
10" x 14"
14" x 20"
OnSite
Supply
Sizes Available:
Fasteners
Construction Signage
Anchors
Shown here a only a few of the signs that are available. Please call
for a a complete listing of signs available or with your needs. Signs
are available to ship within 24 hours. Custom signs available.
OSHA Signs
OSHA signs are the perfect way to
alert your employees and guests when
a hazard is present in your facility.
Keep your facility safe, buy an OSHA
regulated sign today and prevent an
accident tomorrow. These OSHA signs
comply with OSHA 29 CFR 1910.145
Strut
D169
D592
D59
D81
D201
D79
D217
M24
D201
D201
Threaded
Rod
D164
Pipe
Hangers
Tools
Abrasives
M24
M39
FX22
12" x 9"
24" x 4"
12" x 4"
Glow-InThe-Dark
Available
FXFMA
12" x 9"
CUSTOM SIGNS
AVAILABLE!
Sizes Available:
OnSite
Supply
Safety
Materials Available:
If for some reason the
sign you need is not
available as a stock
item, you can custom
design one to your exact
requirements!
.040 Aluminum
Fiberglass
Pressure Sensitive Vinyl
Rigid Plastic
CALL TODAY FOR
A QUOTE!
3" x 5" (Pressure Sensitive Vinyl Only)
7" x 10"
10" x 14"
14" x 20"
(Not all legends available in all sizes
or materials, please call)
Rentals
626
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Brady Pipemarkers featuring self-sticking vinyl markers printed with weather resistant inks and offer excellent indoor/outdoor durability
and superior adhesion. Temperature rated from -40° to 180° F. Excellent application for both non-insulated and jacketed insulated
pipes. Features a wide range of legends and sizes to fit all common size pipes.
All pipemarkers conform to ANSI Standard A13.1-1981, entitled “Scheme for the
Identification of Piping Systems, developed to “ promote greater safety, by lessening the
chance for error, confusion, or inaction especially in times of emergency.” This standard
considers legend to be primary and explicit for identification of content. Arrows shall be
“used to indicate the direction of flow.
Fasteners
Self-Sticking Pipe Markers
Anchors
Pipe MArkers / Extinguishers / Rebar Caps
Appearance — Bold Gothic characters on colorful ANSI/OSHA coded backgrounds
command attention. Printed markers provide unmistakable identification; sharp-edged
color bands add impact and high visibility.
For a full listing of available style and legends, please contact Inside Sales
Multi-Purpose Dry Chemical Extinguishers
Threaded
Rod
Economy — Reduce the probability of mistakes costing thousands of dollars with proper
pipe identification. Employees no longer need to search for blueprints to trace piping.
Employee training is also simplified with visually instructive marking.
Pipe
Hangers
Safety — Unmarked pipes mean danger to both life and property. Injuries have occurred
through ignorance of pipe contents, particularly in the cases of new employees or when
outside agencies are called in under emergency situations.
Strut
Why Mark Your Pipes?
Directional Flow Arrow Tape
Abrasives
Buffalo Bargard®
Protector Caps
Tools
Specially formulated to withstand the elements. Use
outdoors or indoors with self-sticking pipemarkers.
Supplied in 30 yard, liner mounted, roll form. Choose
Black/Yellow, White Green, White/Red or White Blue in
1", 2" or 4" widths.
Bargard®
Protector Caps
Part No. Description / Color
Part No.
Capacity
UL Rating
Bracket
Style
23704
23700
23706
23702
23707
466227
466288
466112
466204
466206
2 lbs.
4 lbs.
5 lbs.
10 lbs.
20 lbs.
1-A:10-B:C
2-A:10-B:C
3-A:40-B:C
4-A:60-B:C
10-A:80-B:C
Wall/ Vehicle
Wall
Wall/Vehicle
Wall
Wall
A-5
Fits diameters 3/8” to 3/4”, lime green
A-10
Fits diameters 3/8” to 1-1/4”, lime green
A-10
Fits diameters 3/8” to 1-1/4”, lime green
A-20
Fits diameters 1” to 2-1/4”, lime green
Buffalo Bargard, orange
Fits No. 3 - 9, 3/8” - 1-1/4” for impalement protection
with height up to 7’6” and 250 lb
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
627
Safety
Each extinguisher comes with its own mounting bracket. All are
U.S. Coast Guard approved.
Rentals
Units feature large, easy-to-read pressure gauges and convenient
upright squeeze grip operation.
OnSite
Supply
Multi-purpose ABC extinguishers utilize mono-ammonium
phosphate dry chemical to extinguish Class A, B or C fires.
Designed for industrial use, they provide many years of trouble
free service.
Fasteners
Traffic Safety
Anchors
Traffic Signage
Type 1 Barricade
Shown here a only a few of the signs that are available. Please call for a a complete listing of signs
available or with your needs. Signs are available to
ship within 24 hours. Custom signs available.
Constructed of 1/2” outdoor
grade plywood with 1-1/4” x
1-1/4” x 1/8” steel angle iron
legs painted white. 36” high in
open position, 12” top panel; 6”
bottom panel. Top panel includes
engineering-grade reflective
sheeting to meet all Federal and
State requirements. Barricade
light sold separately.
Traffic Signs are available with Engineer Grade
or Hi-Intensity Prismatic Reflective sheeting upon
request
Part No.
Description
Strut
1HM-0009 24” Barricade
1HM-0008 36” Barricade
Barrier Flasher Light
Threaded
Rod
TM50
18" x 12"
.043 or .063
Aluminum
TM3
18" x 12"
.043 or .063
Aluminum
TM11
18" x 12"
.043 or .063
Aluminum
TM220
18" x 12"
.043 or .063
Aluminum
Flashing amber light is weatherproof, with
tamper resistant switch. 7” high-impact resistant
lexan lens. Rotates 360°. Powered by two 6
volt batteries (not included). Features photocell
operation. Unit automatically operates at dusk.
Part No.
Description
1BP-0016 Flasher
Traffic Cones
Pipe
Hangers
Tools
TM90
18" x 12"
.043 or .063
Aluminum
TM1
18" x 12"
.043 or .063
Aluminum
N360
10" x 14"
.040 Aluminum, PS Vinyl, or
Rigid Plastic
Orange/red PVC material flow molded over
white inner liner. Stands up to the hottest
summers and coldest winters. Available in
all sizes, from 12” to 36” heights. Relective
Collars: Meets MUTCD requirements for
nighttime visibility. Upper 6”collar and lower
4” collar.
Part No.
Description
3004020
3004023
3004057
3005159
3004254
3004245
12” Cone, Black Base
18” Cone, Black Base
28” Cone, Black Base
36” Cone, Black Base
28” Cone, Reflective, Blk Base
28” Cone, Reflective, Orange Base
Abrasives
Printed Barricade Tape
OnSite
Supply
TM132
30" x 30"
.080 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective
TM13 20" x 20"
.063 Aluminum
Available in 3” x 1000’ x .004 polyethylene with various
repeating legends. Caution legends are printed on yellow. Danger
legends are printed on red. Non-adhesive. Call for other legends.
TM34R 18" x 18"
Rigid Plastic
Description
Part No.
TM81 30" x 30"
.063 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective Available
on TM13 and TM81
600CC1000
Caution/Caution 3" x 1000'
600CC300
Caution/Caution 3" x 300'
600RD1000
Danger/Danger 3" x 1000'
600RD300
Danger/Danger 3" x 300'
Safety
Saf-T-Paddle Signs
STOP/SLOW or STOP/STOP
with 10" wooden handle.
Rentals
TM124
30" x 30"
.080 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective
628
Hartford, CT
800-969-0285
Part No.
Description
PS1
PS2
STOP/SLOW
STOP/STOP
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
• 2 sizes M-XL and 2X-5X
• Soft, lightweight fluorescent polyester fabric and machine washable
• Meets ANSI / ISEA 107 - 2004 Class 2 standards
Class
Color
Size
Deluxe/Mesh
3012877
2
Lime
M/XL
3012878
2
Lime
2X/5X
3012875
2
Orange
M/XL
3012876
2
Orange
2X/5X
3012873
2
Lime
M/XL
3012874
2
Lime
2X/5X
3012870
2
Orange
M/XL
3012872
2
Orange
2X/5X
Deluxe/Solid
Class
Part No.
Class
Color
Size
Standard/Mesh
3022293
2
Orange/Silver M/LG
3022294
2
Orange/Silver XL/2X
3022295
2
Orange/Silver 3X/4X
Lime Silver
3022296
2
M/LG
3022297
2
Lime/Silver
XL/2X
2
3X/4X
3022298
Lime/Silver
Standard/Solid
3022287
2
Orange/Silver M/LG
3022288
2
Orange/Silver XL/2X
3022289
2
Orange/Silver 3X/4X
3022290
2
M/LG
Lime Silver
XL/2X
3022291
2
Lime Silver
2
3X/4X
3022292
Lime Silver
Deluxe/Solid - Zipper closure, 4 - Pockets, Orange
Color-prismatic Reflective Tape
3022279
2
Lime/Orange XL/2X
2
Lime/Silver
3X/4X
3022286
Standard Style
Color
Size
Standard Solid
3022263
2
Lime w/Silver Reflective
M/L
3022264
2
Lime w/Silver Reflective
XL/2X
3022265
2
Lime w/Silver Reflective
2X/4X
Fasteners
Anchors
Strut
Standard Style
• Hook and Loop front closure
• 360° visibility with high intensity
tape. Machine washable
• Silver bead reflective tape on
mesh or solid fabric options
• Meets ANSI / ISEA 107 - 2004
Class 2 standards
Flame Retardant ANSI
Class 2 Safety Vests
• Soft, lightweight and fluorescent
100% polyester fabric
• Hook and Loop closure
• Fabric is treated with flame retardant chemical meeting NFPA 701
• 3 sizes fit most: M/L, XL/2X,
3X/4X
• Machine Washable
• Meets ANSI / ISEA 107 - 2004
standards
Part No.
Abrasives
Part No.
ANSI Class 2 Safety Vests
Specialty Safety Vests
Custom Vests to Identify Key Personnel
• Constructed of heavy-duty vinyl-coated fluorescent knit fabric
• Reflective 1-3/8" vertical stripes and 4" x 16" reflective
patches on both front and back
• Reflective colors of lime or white, single or double patches
• Fabric colors available: orange, blue, brown, forest
green, black, white, lime, or yellow
• Front hook & loop closure with 3⁄4" x 8" elastic straps
• Bound in 3⁄4" black vinyl binding
Standard legends include the following: COMMAND,
COMMANDER, CRIME, EMERGENCY, EMS, EMT, FIRE,
FIRE POLICE, GUARD, HAZ-MAT, INCIDENT, LIAISON,
MANAGER, MEDICAL, OFFICER, OPERATIONS, PARAMEDIC, POLICE, RESCUE, SAFETY, SCENE, SCHOOL
GUARD, SECURITY, SHERIFF, TRIAGE
OnSite
Supply
• 3 Pockets; 2 inside & 1
outside along with shoulder mic/antenna tab
• Adjustable panel-belt system for tailored fit over
bulky clothes
• 4-Inch split fluorescent
trim with 2-inch wide super bright silver retroreflective tape. Orange vest
feature Silver Tape over
Lime, Lime Vests feature
Silver Tape over Orange
Threaded
Rod
Deluxe Style
Pipe
Hangers
ANSI Class 2 Two-Tone Safety Vests
Safety
Tools
TRAFFIC SAFETY VESTS
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
629
Rentals
Call Customer Service for more details
Fasteners
Traffic Safety Vests
ANSI Class 1 Safety Vests
ANSI Class 1 Safety Vests
Standard Style
Deluxe Style
Anchors
• Meets ANSI / ISEA 107-2004
Class 1 standard
• Hook and loop front closure
• Silver beaded reflective tape on
mesh fabric
• 100% polyester
• Machine washable
Strut
• 4 Pocket design (2 exterior and
2 interior) for increased carrying
space
• Rugged color matched front zipper closure
• 360° visibility with high intensity
prismatic tape
• Machine washable
• Meets ANSI / ISEA 107 - 2004
Class 1 standards
Part No.
Class
Color
Part No.
Deluxe Mesh - Lime Stripe
Threaded
Rod
1
Orange
M/LG
3022273
1
Orange
XL/2X
3022274
1
Orange
3X/4X
3009842
1
Orange
(Solid)
2X
1
Orange
M/LG
3022270
1
Orange
XL/2X
3022271
1
Orange
3X/4X
Pipe
Hangers
Econo Style ESK
Safety Vests
• One Size Fits Most
• Elastic Sides for easy fit
• Mesh Fabric
• Hook and look closure
General Purpose GPV
Safety Vests
Tools
Abrasives
Part No.
Size
3022269
• 3/4" x 2" front hook and loop front
closure with 3/4" x 8" elastic side
straps
• Constructed of flat weave, 7oz.
poly vinyl coated for durability
• Can be wiped clean.
Color
Standard Mesh
Size
3022272
Class
Part No.
Color
Non-Reflective
3017585
Orange
3017586
Lime
Reflective
Color
Non-Reflective
3017587
Orange, 1/2” Silver Beaded
3006270 Orange
3017589
Orange, 3/4” Lime Prismatic
Reflective
3017594
Orange, 1-3/8” Lime Prismatic
3007308 Orange, 3M Lime/
Silver
3017591
Lime, 3/4” White Prismatic
3017593
Lime, 1-1/2” 2-Tone Reflective
3006273 Orange, Lime Reflective
3017595
Lime, 1-1/4” 2-Tone Reflective
OnSite
Supply
Tool Repair
Safety
NEFCO offers tool repair on many makes and brands
and tool rental on name-brand items from Greenlee,
Ridgid, and Milwaukee.
Rentals
630
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
(800) 969-0285
Philadelphia, PA
610-647-8070
(860) 289-0285
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
631
FAX (860) 282-1487
Hartford, CT
800-969-0285
Rentals
NEFCO RENTALS!
Safety
SALES • SERVICE • RENTALS
Fasteners
Electrician's Equipment - Rental
Cable Pulling & Fishing
1 DAY
1 WEEK
4 WEEK
Anchors
Greenlee 6805
Cable Puller Pkg. w/Carriage Assembly, Rated at 8,000 lbs. $ 195.00
$ 395.00
$1,100.00
Greenlee 6004
Cable Puller Pkg. w/Carriage Assembly, Rated at 6,000 lbs. $ 180.00
$ 360.00
$1,080.00
Greenlee 6800
Cable Puller Motor 8,000 lb. rated with Force Gauge
Strut
and Floor Mount
$ 110.00
$ 225.00
$ 675.00
Greenlee 6810
Cable Feeder
$ 145.00
$ 295.00
$ 595.00
Greenlee UG512ST
Cable Lubricator System – Ultra Glider®
$ 100.00
$ 300.00
$ 695.00
Greenlee 8012
Hook Sheave 12" - 8,000 lb. Rated
$ 15.00
$ 30.00
$ 60.00
Greenlee 8018
Hook Sheave 18" - 8,000 lb. Rated
$ 25.00
$ 50.00
$ 100.00
Greenlee 8024
Hook Sheave 24" - 8,000 lb. Rated
$ 40.00
$ 80.00
$ 160.00
Greenlee 6072
Manhole Sheave 12 ft. - 6500 lb. Rated
$ 80.00
$ 240.00
$ 480.00
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
Greenlee 441-2
Feeding Sheave 2"
$ 20.00
$ 30.00
$ 70.00
Greenlee 441-2-1/2
Feeding Sheave 2-1/2"
$ 20.00
$ 30.00
$ 70.00
Greenlee 441-3
Feeding Sheave 3"
$ 20.00
$ 30.00
$ 70.00
Greenlee 441-3-1/2
Feeding Sheave 3-1/2"
$ 25.00
$ 35.00
$ 75.00
Greenlee 441-4
Feeding Sheave 4"
$ 25.00
$ 35.00
$ 75.00
Greenlee 441-5
Feeding Sheave 5"
$ 25.00
$ 35.00
$ 75.00
Greenlee 2018R
Cable Tray Rollers Radius 12" - 18"
$ 12.50
$ 12.50
$ 25.00
Greenlee 2018S
Cable Tray Rollers Straight 12" - 18"
$ 10.00
$ 10.00
$ 20.00
Greenlee 2024R
Cable Tray Rollers Radius 20" - 24"
$ 14.00
$ 14.00
$ 27.50
Greenlee 2024S
Cable Tray Rollers Straight 20" - 24"
$ 12.00
$ 12.00
Greenlee 2030R
Cable Tray Rollers Radius 24" - 30"
$ 15.00
$ 15.00
Greenlee 2030S
Cable Tray Rollers Straight 24" - 30"
$ 13.00
$ 13.00
$ 25.00
Greenlee 2036R
Cable Tray Rollers Radius 30" - 36"
$ 18.00
$ 18.00
$ 35.00
Greenlee 2036S
Cable Tray Rollers Straight 30" - 36"
$ 15.00
$ 15.00
$ 30.00
Greenlee 658
Cable Tray Sheave 12" long
$ 10.00
$ 10.00
$ 25.00
Greenlee 659
Cable Tray Sheave 22" long
$ 15.00
$ 15.00
$ 30.00
$ 40.00
$ 22.50
$ 30.0
Cable Pulling & Fishing - Accessories
OnSite
Supply
Safety
Greenlee 687
Reel Stand 13" – 28"
$ 10.00
$ 20.00
Greenlee 683
Reel Stand 22" – 54"
$ 15.00
$ 30.00
$ 60.00
Greenlee 656
Reel Stand 28" – 46"
$ 45.00
$ 90.00
$ 180.00
Greenlee 647
Spindle for 687 reel stand
$ 5.00
$ 10.00
$ 30.00
Greenlee 684
Spindle for 683 reel stand
$ 12.00
$ 24.00
$ 60.00
Greenlee 657
Spindle for 656 reel stand
$ 45.00
$ 90.00
$ 180.00
Greenlee 629
Pulling Grip Kit (set screw type)
$ 15.00
$ 30.00
$ 90.00
Greenlee 916
Cable Reel Hand Cart
$ 30.00
$ 40.00
$ 90.0
Greenlee 910
Wire Dispenser 10 Spool w/18" Diameter
$ 30.00
$ 85.00
$ 250.00
Greenlee 690
Fishing System Vacuum/Blower 1/2" to 4"
(pistons and string sold separate)
$ 35.00
$ 75.00
$ 225.00
$ 145.00
$ 295.00
$ 895.00
Pipe Bending
Greenlee 1818
Mechanical Bender 3/4" thru 2" EMT,
1/2" — 1-1/4" IMC & 1/2" — 1-1/2"" RIGID
Rentals
632
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
1 DAY
1 WEEK
4 WEEK
Electric Bender 855 Smart Bender w/
Pendant, 1/2" thru 2" EMT, IMC & RIGID
$ 200.00
$ 400.00
$1,100.00
Greenlee 882CB
Hydraulic Bender 1-1/4", 1-1/2" & 2"
EMT, IMC & RIGID (less pump)
Greenlee 881CT
Hydraulic Bender 2-1/2", 3", 3-1/2" & 4"
$ 100.00
$ 200.00
$ 600.00
EMT, IMC & RIGID (less pump)
Greenlee 885
Hydraulic Bender 1-1/4" thru 4" one shot
$ 360.00
$ 695.00
$1,995.00
5" segment RIGID Conduit
(less pump)
$ 200.00
$ 500.00
Strut
Greenlee 855
Fasteners
$ 1,500.00
Greenlee 1802
Bending Table – Specify pipe support pins
$ 50.00
$ 150.00
$ 395.00
Greenlee 1813
Bending Table for all 881 series benders
$ 50.00
$ 150.00
$ 395.00
Greenlee 755
Hydraulic Hand Pump 10,000 PSI
$ 20.00
$ 40.00
$ 125.00
Greenlee 767
Hydraulic Hand Pump 6,500 PSI
$ 12.00
$ 24.00
$ 72.00
Greenlee 980
Electric/Hydraulic Pump 10,000 PSI
$ 75.00
$ 150.00
$ 395.00
Threaded
Rod
Pipe Bending
Anchors
Electrician's Equipment - Rental
Greenlee 849
Electric PVC Bender 1/2" thru 2"
$ 25.00
$ 50.00
$ 150.00
Greenlee 851
Electric PVC Bender 1/2" thru 4"
$ 37.50
$ 75.00
$ 225.00
Greenlee 848
Electric PVC Bender 1/2" thru 6" with motorized rotation
$ 55.00
$ 110.00
$ 330.00
Greenlee 859-4
PVC Plug Kit - 2" thru 4"
$ 10.00
$ 20.00
Greenlee 7310SB
Hydraulic Punch Kit 1/2" to 4" complete
$ 45.00
$ 135.00
$ 350.00
Greenlee ETS811
Cordless Cable Tray Cutter, incl. batteries & charger
$ 100.00
$ 250.00
Pipe
Hangers
PVC Bending
$ 60.00
N/A
Tools
Holemaking/Cutting
Greenlee 1990
Hydraulic Crimping Tool Dieless/Manual -1000MCM cap.
$ 85.00
$ 170.00
$ 500.00
Greenlee 03554
Cable Cutter, Cordless 12V, 2" Aluminum/Copper cap.
$ 85.00
$ 170.00
$ 500.00
Greenlee 750
Hydraulic Cable Cutter, Includes Ram & Case (Less Pump) $ 50.00
$ 100.00
$ 270.00
Greenlee EK06FT11
Cordless Cable Crimper Dieless, incl. 2 batteries & charger $100.00
$ 300.00
$ 900.00
Greenlee HKL1232
Hydraulic Cable Crimper 12 Ton U-Die Style;
Dies sold separately
$85.00
$ 170.00
$ 500.00
$ 270.00
$ 810.00
Abrasives
Termination
7 Foot Tripod, 3-way Portable Access & Recovery System
$ 90.00
Confined Space Barricade, 4-Panel
$ 15.00
$ 45.00
$ 135.00
General EP8
Electric Blower 8"
$ 50.00
$ 100.00
$ 200.00
Hose 8X25
Blower Hose 8" X 25’ with Securing Straps
$ 15.00
$ 45.00
$ 135.00
4 Gas Detector, Confined Space, O2, LEL, H2S, CO
$ —.—
$ 225.00
$ 600.00
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
633
Rentals
Safety
Safewaze M2050
OnSite
Supply
Confined Space
Fasteners
Mechanical Contractor's Equipment - Rental
1 DAY
1 WEEK
4 WEEK
Pipe Threading
Anchors
Strut
Ridgid 36475
12-R Threader Set 1/2" thru 2" – Incl.Die Heads, Ratchet
Assembly & Handle & Case (dies sold separate)
$ 25.00
$ 50.00
$ 150.00
Ridgid 700
700 Power Drive
$ 40.00
$ 80.00
$ 240.00
Ridgid 300C
300 Complete Threading Machine 1/8" thru
2" with stand (dies sold separate)
Ridgid 1224
1224 Threading Machine ½" thru 4"
with stand (dies sold separate)
Ridgid 141
141 Universal Geared Threader 2 ½" — 4"
Ridgid 161
161 Universal Geared Threader 4" — 6"
$ 100.00
$ 200.00
$ 400.00
$ 240.00
$ 480.00
$1,140.00
Threaded
Rod
$ 75.00
$ 150.00
$ 450.00
$ 110.00
$ 215.00
$ 650.00
$ 10.00
$ 30.00
$ 90.00
$ 5.00
$ 10.00
$ 30.00
$ 25.00
$ 50.00
$ 150.00
$ 5.00
$ 10.00
$ 20.00
Ridgid 811A
811A Die Heaad 1/2” - 2” Universal (dies sold separate)
Ridgid 844
844 Drive Bar N/C with rented geared threader
Ridgid 840A
840A Universal Drive Shaft N/C w/ rented geared threader
Ridgid 758
758 Loop N/C with rented geared threader
Ridgid 346
346 Support Arms (2) N/C with rented geared threader
$ 10.00
$ 25.00
$ 75.00
Ridgid 418
418 Oiler with Gun and Hose
$ 10.00
$ 30.00
$ 90.00
$ 100.00
$ 200.00
$ 600.00
$ 75.00
$150.00
$ 450.00
$ 75.00
$ 75.00
$ 180.00
$ 105.00
$ 215.00
$ 650.00
$ 50.00
$ 100.00
$ 150.00
Super Freeze Kit 1/2" thru 2-1/2" Copper
$ 100.00
$ 250.00
$ 750.00
Pipe Thawer 1-1/2" capacity, 25 ft. cable
$ 25.00
$ 75.00
$ 225.00
Hole Cutter 3" Hole Cap., 8" Pipe capacity
$ 35.00
Ridgid 460
460 Portable Tristand Vise - 6" cap.
$ 15.00
Ridgid VJ-99
V Head Pipe Stand - 12" /2500 lb. cap.
$ 10.00
Ridgid AR-99
Adj. Stand w/Rollers 36"/2500 lb. cap.
$ 15.00
$ 30.00
Ridgid 424-S
Ridgid 466-S
Ridgid 468-S
Hinged Pipe Cutter 2" thru 4" – Steel
Hinged Pipe Cutter 4" thru 6" – Steel
Hinged Pipe Cutter 6" thru 8" – Steel
$ 20.00
$ 20.00
$ 20.00
$ 60.00
$ 60.00
$ 60.00
$ 180.00
$ 180.00
$ 180.00
Ridgid 246
Soil Pipe Cutter 1-1/2" thru 8"
$ 15.00
$ 45.00
$ 135.00
Ridgid 258 Kit
Power Pipe Cutter 2-1/2" thru 8" Incl: Cutter, 700 Power
Dr., Adapter, Blade, 2 pipe supports, foot pump, & Transport Cart $ 200.00
$ 400.00
$1,100.00
Ridgid 258XL Kit
Power Pipe Cutter (Same as 258) 8” thru 12”
$ 400.00
$ 1,100.00
Pipe Pressing
Pipe
Hangers
Ridgid 330-B
Pro-Press Kit - 1/2” – 2”
Ridgid 20483
Pro-Press Ring Kit - 2-1/2” – 4”
Roll Grooving
Reed RG6HDCOMBO Portable Roll Groover 1-1/4" – 6" Schedule 10 & 40
Tools
Ridgid 918
Hydralic Roll Groover 1”–12” Sched. 10;
1”-8” Sched. 40 Steel, PVC; 1”– 2” Sched. 40 SS
Ridgid 48417
Copper Roll Set for 2”– 6” Copper
Pipe Freeze
Ridgid SF-2500
Pipe Thawer
Abrasives
Ridgid KT-200
Pipe Hole Cutter
Ridgid HC-300
$ 105.00
$ 315.00
Pipe Stands
OnSite
Supply
$ 30.00
$ 90.00
$15.00
$ 30.00
$ 75.00
Pipe Cutters
Safety
Rentals
634
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
$ 200.00
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
$ 75.00
$ 200.00
$ 600.00
R
idgid
Utility Line Locator Kit – Includes:
SR20/ST305/20973
Locator, Transmitter, Inductive Clamp & Case
Hydrostatic Test Pump
H
ydro-Test 500-302
Hydrostatic Test Pump, 115V, 500 PSI
Portable Air Cleaner
ACE 73-250
“Fume Sucker”, Collects Dust & Smoke 115V, 226 CFM
$ 75.00
$ 125.00
$ 300.00
Sumner 2124
Material Lift (Duct Lift) 650 lb. cap. 24 ft. lift ht.
$ 65.00
$165.00
$ 365.00
Sumner Cricket
Pipe Buggy – The Cricket
$ 25.00
$ 50.00
$ 150.00
Sumner Grasshopper
Pipe Buggy – The Grasshopper
$ 35.00
$ 70.00
$ 210.00
Greenlee 668
Mobile Pipe Rack/Cart 1000 lb. capacity
$ 50.00
$ 50.00
$ 100.00
EZ Roll 2748
Pallet Jack 27" X 48" – 5000 lb. capacity
$ 35.00
$ 70.00
$ 210.00
EZ Roll CED-1830-3HR
Wood Dolly Carpeted 18"X30" 990 lb. cap
$ 5.00
$ 10.00
Biljax 0063-0575-11YE
Sheet Rock Cart 3000 lb. capacity
$ 15.00
$ 40.00
$ 75.00
Biljax 0063-0595
Sheet Rock Lift 15 ft.
$ 40.00
$ 80.00
$ 250.00
Rubbermaid 1314
Tilt Truck 1 Cubic Yard 750 lb. capacity
$ 25.00
$ 75.00
$ 150.00
Grip 19721
Manual Chain Hoist 1 Ton 20 ft. lift
$ 30.00
$ 60.00
$ 120.00
Grip 41539
Manual Chain Hoist 2 Ton 20 ft. lift
$ 40.00
$ 80.00
$ 160.00
Milwaukee 9687-20
Lever Chain Hoist 1 1/2 Ton 20 ft. lift
$ 30.00
$ 60.00
$ 120.00
Milwaukee 9691-20
Lever Chain Hoist 3 Ton 20 ft lift
$ 40.00
$ 120.00
$ 240.00
Lugall 3000-30SH
Cable Hoist 1 ½ Ton 15 ft. lift
$ 25.00
$ 50.00
$ 100.00
$ 25.00
$ 75.00
$ 245.00
Material Handling
$ 25.00
Pipe
Hangers
Fasteners
4 WEEK
Anchors
1 WEEK
Strut
1 DAY
Tools
Pipe & Wire Utility Line Locator
Threaded
Rod
Mechanical Contractor's Equipment - Rental
Tone S60EZ
TC Bolt Installation Tool 5/8" to 7/8"
$ 100.00
$ 250.00
$ 700.00
Tone S90EZ
TC Bolt Installation Tool 5/8" to 1"
$ 125.00
$ 350.00
$ 800.00
Tone S110EZ
TC Bolt Installation Tool 3/4" to 1-1/8"
$ 140.00
$ 400.00
$ 900.00
Tone S80EZ
TC Bolt Installation Tool - Right Angle 3/4 “ to 1"
$ 140.00
$ 400.00
$ 900.00
Abrasives
TC Bolt Installation Tools
Magnetic Drill Press
Magnetic Drill Press 7/16" thru 1 ½" dia.
$ 75.00
$ 150.00
$ 450.00
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
635
Rentals
Safety
Hougen HMD904
OnSite
Supply
A set of inner & outer sockets is required with the rental of all Tone tools,
Please specify size requirement(s)
Fasteners
For all Trades - Rental
C
ore Drilling
1 DAY
1 WEEK
4 WEEK
Anchors
Milwaukee 4136
Combo Base Core Drill Rig w/ 4096 Motor
$ 95.00
$ 290.00
$ 830.00
Milwaukee 49-50-0200
Vacuum Pump Assembly for 4136/4096
$ 18.00
$ 54.00
$ 162.00
Milwaukee 49-22-7100
Vacuum Pad Assembly for 4136/4096
iamond Prod. M-4
D
Combo Base Core Drill Rig with Weka DK13
N/C
N/C
N/C
Strut
hand held motor (less vacuum)
$ 75.00
$ 225.00
$ 675.00
Diamond Prod. DK-13
Hand Held Core Drill Motor Dry/Wet
$ 50.00
$ 150.00
$ 400.00
Diamond Prod.01878
Adapter 1 1/4-7 Female X 5/8-11 Male
$ 4.00
$ 8.00
$ 16.00
Diamond Prod. 01870
Extension 5/8-11 X 12 inches long
$ 4.00
$ 8.00
$ 16.00
Diamond Prod. 01873
Extension 1 1/4-7 X 12 inches long
$ 5.00
$ 10.00
$ 20.00
Milwaukee 49-76-0055
Water Tank - 4 Gal. Portable Pressure Tank
$ 10.00
$ 20.00
$ 40.00
Threaded
Rod
C
oncrete & Asphalt Cutting
D
ewalt D28755
Electric Cut-Off Saw -14"
$ 45.00
$ 135.00
$ 270.00
Diamond Prod. SC73212
Gas Cut-Off Saw – 12"
$ 50.00
$ 150.00
$ 300.00
Diamond Prod. SC73214
Gas Cut-Off Saw – 14"
$ 50.00
$ 150.00
$ 300.00
Diamond Prod. SC8116
Gas Cut-Off Saw – 16"
Pipe
Hangers
$ 60.00
$ 180.00
$ 360.00
Diamond Prod. CC1213HS-18
Road Saw – 18” Push-Type
$ 50.00
$ 150.00
$ 450.00
Diamond Prod. CC1820HS-20
Road Saw – 20” Self-Propelled
$ 75.00
$ 225.00
$ 675.00
Diamond Prod. CC2524HS-26
Road Saw – 26” Self-Propelled, w/ Electric Raise/Lower $ 150.00
$ 395.00
$ 995.00
$ 50.00
$ 150.00
$ 450.00
$ 25.00
$ 50.00
$ 150.00
$ 30.00
$ 60.00
$ 120.00
$ 100.00
$ 150.00
$ 350.00
Rotary Laser
Dewalt DW077KDT
Rotary Laser, Self Leveling – Includes: Tripod, Rod, Battery,
Charger, Detector, Remote, Bracket, Target & Glasses
Scaffolding
Tools
Louisville Ladder
Scaffold Section Indoor – 6’ X 6’ X 29 1/2"
SS0606A
Includes: 2 Frames, 2 Trusses, 1 Platform,
4 Casters and 4 Stacking Pins
Louisville Ladder
Abrasives
398006AA
Scaffold Guardrail & Toeboard Section
FE7240
40’ Fiberglass Extension Ladder
Portable Generators & Accessories
OnSite
Supply
Dewalt DG4400B
Gas Generator 4400 W Battery/Recoil Start
$ 55.00
$ 165.00
$ 495.00
Dewalt DG6300B
Gas Generator 6300 W Battery/Recoil Start
$ 65.00
$ 195.00
$ 585.00
CEP 6506GU
C4312050YW
C4312100YW
Power Distribution Box – 6 Outlet
Extension Cord 12/3 X 50’
Extension Cord 12/3 X 100’
$ 25.00
$ 5.00
$ 7.00
$ 50.00
$ 10.00
$ 14.00
$ 150.00
$ 20.00
$ 28.00
Safety
Rentals
636
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Dewalt D55154
Dewalt D55170
Electric Compressor 4 Gal/3.8 CFM
Electric Compressor 5 Gal/6.5 CFM
Dewalt D55275
Gas Compressor 17 Gal/16.2 CFM
Towable Gas Compressor 185 CFM
Hose 3/8x50Air
Hose 3/8x50Air
Air Hose 3/8 X 50’ with ¼ NPT fittings
Air Hose 3/4 X 50’ with Bolt fittings
1 WEEK
4 WEEK
$ 30.00
$ 35.00
$ 90.00
$ 105.00
$ 220.00
$ 275.00
$ 100.00
$ 200.00
$ 450.00
MARKET RATES VARY - Please CALL for Pricing
$ 5.00
$ 5.00
$ 15.00
$ 15.00
Fasteners
1 DAY
$ 30.00
$ 30.00
Pressure Washer
D
ewalt DP3900
Pressure Washer 3750 PSI with 3/8 X 50’ hose
$ 100.00
$ 200.00
$ 475.00
Dewalt DP352
Pressure Washer Hose 3/8 X 50’ (Extra Length)
$ 10.00
$ 20.00
$ 40.00
Dewalt D25313K
SDS Rotary Hammer 1" cap.
$ 25.00
$ 50.00
$ 150.00
Dewalt D25550K
Spline Drive Rotary Hammer 1 9/16" cap.
$ 30.00
$ 90.00
$ 250.00
Dewalt D25600K
SDS MAX Rotary Hammer 1 ¾" cap.
$ 35.00
$ 105.00
$ 275.00
Milwaukee 5337-21
ilwaukee 5340-21
M
Demolition Hammer 3/4 Hex 25 lb. Class
Demolition/Rotary Hammer Spline Drive 25 lb. Class
$ 35.00
$ 35.00
$ 105.00
$ 105.00
$ 315.00
$ 315.00
Milwaukee 5342-21
Demolition/Rotary Hammer SDS MAX 25 lb. Class
$ 35.00
$ 105.00
$ 315.00
P1230
C
CP1240
Pavement Breaker 60 lb. Pneumatic
Pavement Breaker 90 lb. Pneumatic
$ 40.00
$ 45.00
$ 80.00
$ 90.00
$ 220.00
$ 270.00
Dewalt D25980K
Pavement Breaker 65 lb. Electric with cart & steel
$ 75.00
$ 200.00
$ 450.00
TPI PB36D
Box Fan 36" 2 Speed - 9000/12500 CFM
$ 30.00
$ 90.00
$ 200.00
Powr-Flite PD500
Carpet/Floor Dryer 3 Speed
$ 25.00
$ 50.00
$ 125.00
CEP 5710
Light Stand - 1000 Watt – 7’ Dual Head
$ 10.00
$ 30.00
$ 75.00
Light Tower - Towable, 4000 Watt
MARKET RATES VARY - Please CALL for Pricing
WL400MH
Wobble Light – 400 Watt/40,000 Lumen
$ 25.00
$ 50.00
$ 150.00
T
surmi LB480
Electric Submersible Pump 2" top discharge
$ 30.00
$ 90.00
$ 225.00
Multiquip ST2040T
2” Electric Submersible Trash Pump
$ 30.00
$ 90.00
$ 225.00
Multiquip QPT2H
2” Gas Powered Trash Pump
$ 40.00
$ 100.00
$ 300.00
Multiquip QPT3H
3” Gas Powered Trash Pump
$ 45.00
$ 110.00
$ 315.00
Strut
Portable Compressors
Anchors
For all Trades - Rental
Pipe
Hangers
Demolition Hammers
Threaded
Rod
Rotary Hammers
Hose 2X20SPVC
Suction Hose 2” x 20’ PVC
$ 10.00
$ 20.00
$ 60.00
Hose 2X50DPVC
Discharge Hose 2” x 50’ PVC
$ 10.00
$ 20.00
$ 60.00
H
ose 3X20SPVC
Suction Hose 3" x 20’ PVC
$ 10.00
$ 20.00
$ 60.00
$ 10.00
$ 20.00
$ 60.00
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
637
Rentals
Safety
Hose 3X50DPVC
Discharge Hose 3” x 50’ PVC
All Rental Rates are subject to change
Actual make & model # may differ than actual listing
Abrasives
Pumps & Hose
OnSite
Supply
Temporary Lighting
Tools
Fans & Blowers
Fasteners
For All Trades - Rental
Anchors
Strut
Threaded
Rod
Pipe
Hangers
19’ Electric Scissor Lift
26’ Electric Scissor Lift
Rough Terrain Scissor Lift
1 DAY
Electric Scissor Lifts
1 WEEK
4 WEEK
Tools
19’ Electric Scissor Lift
Following Charges Apply:
Delivery / Pickup Charges may apply
$ CALL
$ CALL
$ CALL
26’ Electric Scissor Lift
Following Charges Apply:
Delivery / Pickup Charges may apply
$ CALL
$ CALL
$ CALL
30’ - 33’ Rough Terrain
Scissor Lift
Following Charges Apply:
$ CALL
$ CALL
$ CALL
Delivery / Pickup Charges may apply
Abrasives
Market Rates Vary - Please Call for Current Pricing
40’, 60’ and 80’ Booms
OnSite
Supply
Safety
40’ Boom
Rates May Vary - CALL
60’ Boom
80’ Boom
Rentals
638
$$ CALL
$ CALL
$ CALL
Rates May Vary - CALL
$ CALL
$ CALL
$ CALL
Rates May Vary - CALL
$ CALL
$ CALL
$ CALL
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Anchors
Industrial Forklifts
Fasteners
For all Trades - Rental
1 WEEK
4 WEEK
5,000 lb., Industrial
Fork Lift
Following Charges Apply:
Delivery / Pickup Charges may apply
$ CALL
$ CALL
$ CALL
8,000 lb., 42’ Reach
Rough Terrain
Fork Lift
Following Charges Apply:
$ CALL
$ CALL
$ CALL
Tools
Delivery / Pickup Charges may apply
Pipe
Hangers
1 DAY
Fork Lifts
Threaded
Rod
Strut
Rough Terrain Forklifts
Temporary Site Heating
Temporary Site Heating
Call for Rates
150,000 to 4,000,000 BTU’s
$ CALL
$ CALL
$ CALL
$ CALL
$ CALL
$ CALL
Abrasives
Ground Thaw/Heating - Concrete Curing
3,000 & 6,000 sq. ft.
Towable Generators
Towable Generators
SHIFTS:
Call for Rates
45kW, 60kW, 70kW, 125kW
SINGLE
$ CALL
DOUBLE
$ CALL
TRIPLE
Safety
Call for Rates
OnSite
Supply
Ground Thaw / Ground Heating / Concrete Curing
$ CALL
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
639
Rentals
Market Rates Vary - Please Call for Current Pricing
Fasteners
rental Terms and Conditions
Anchors
Nefco Rentals Terms and Conditions
Note from our rental manager
Strut
Throughout our catalog, we have placed a “Rent Me” Button
to assist you with a buy vs. rent decision and to let you know those
specific pieces of equipment are usually readily available for
rental. In addition, with 2008 being our first year offering rentals
as an option, our list of equipment available for rent is growing, so
if you don’t find what you’re looking for, please ask.
Payment Methods
Threaded
Rod
All Nefco house accounts receive the same terms & conditions
and will not be subject to equipment deposits and damage waivers; however the damage waiver is available when requested.
For our customers who do not have a Nefco house account, the
following forms of payment are accepted: Cash, Personal or Business Check (with proper I.D) or major credit card. Our non-house
accounts are asked to pay for their rental fees and equipment
deposit at the time of equipment acceptance by customer. Deposits are returned when equipment has been returned and without
exception.
Pipe
Hangers
1) CUSTOMER'S GENERAL RESPONSIBILITY
Tools
Abrasives
Under the NEFCO RENTALS (Agreement), the Customer renting
the Equipment (as that term is defined in the Rental Agreement)
is responsible to for any loss or damage to the Equipment and for
its return in the same condition in which received, except for ordinary wear. Such responsibility shall amount to the replacement
or repair cost of the Equipment at the time it is lost or damaged,
plus an administrative fee and NEFCO RENTALS related losses,
such as, but not limited to, loss of use, appraisal fees or costs of
recovery. In the event that the Customer is responsible for damage to the Equipment, such Equipment may be repaired either by
NEFCO RENTALS or a repairer of choosing. The cost of labor for
such repairs shall be the then prevailing hourly rate for labor at
the repair facility where repairs are effectuated. The Customer will
be charged for parts at the prevailing list price established by the
manufacturer or supplier involved or as charged to NEFCO RENTALS by the supplier or repair facility.
2) PROOF OF INSURANCE
OnSite
Supply
As a precondition of renting Equipment from NEFCO RENTALS,
Customer must produce evidence of insurance in accordance with
the Rental Agreement, or Customer shall be required to purchase
the LDW Assurance Plan, which is NOT INSURANCE. The charge
for the LDW Assurance Plan shall be equal to 14 percent of the
rental amount.
3) WAIVER
Safety
If the Customer purchases the LDW Assurance Plan, and if the
Equipment is used in compliance with this plan, then NEFCO
RENTALS agrees to waive, to the extent specified herein and in
the Rental Agreement, its right to hold Customer liable for any
damages greater than 25 percent of the Equipment's replacement
cost.
A) The use or operation of the Equipment without NEFCO RENTALS permission, or in a manner that would constitute a default
under the Rental Agreement.
B) The failure of the Customer to perform or pay for all normal
periodic and other required or recommended service, adjustments
and lubrication of the Equipment.
C) Negligent, reckless, or abusive use or operation of, or intentional damage to the Equipment while the Equipment is under the
care or control of the Customer (e.g., Equipment rollover or upset,
altering the Equipment for use in a manner for which it was not
designed, coming in contact with an overhead electric power line).
D) The use or operation of the Equipment with a load exceeding
the manufacturer's rated capacity, or as a result of improper loading, unloading, or transportation of the Equipment.
E) All loss or damage associated with vandalism, malicious
mischief, disappearance, theft or conversion of the Equipment,
not documented by the Customer's filing a formal written report
with the applicable public authorities (with an immediate copy to
NEFCO RENTALS) within 24 hours of the event.
F) Customer's failure to properly secure the Equipment and/or by
making it available to any unauthorized and/or untrained operator,
or by not reasonably restricting access to the Equipment.
G) Damage that occurs while Customer uses, allows the use of, or
directs another party to use the Equipment in the commission of a
crime.
H) Customer's failure to notify NEFCO RENTALS within 24 hours of
an accident that has resulted in loss or damage to the Equipment.
I) Customer provides misleading or false information to rent the
Equipment.
J) The Equipment is used by an operator while under the influence
of an intoxicant or other illegal or controlled substance.
K) Customer’s failure to pay all invoices including the LDW within
NEFCO RENTALS payment terms.
5) SUBROGATION
If Customer purchases the LDW Assurance Plan, then NEFCO
RENTALS will be subrogated to any right of the Customer to
recover against any person, firm or corporation. Customer will
execute and deliver any instruments and papers that are required
and do whatever else is necessary to secure such rights. Customer
will cooperate fully with NEFCO RENTALS and/or its insurer(s) in
the prosecution of those rights and will neither take nor permit
any action to prejudice NEFCO RENTALS rights with respect
thereto.
6) Tire Repairs and Replacement
A) The customer is responsible for ALL tire repairs or replacement.
It is the customers responsibility to inspect all tires at the time of
delivery.
4) WAIVER EXCEPTIONS
Rentals
NOT WITHSTANDING THE CUSTOMER'S PAYMENT OF THE LDW
ASSURANCE PLAN CHARGE, THE CUSTOMER WILL BE LIABLE
TO NEFCO RENTALS FOR ALL LOSS OF OR DAMAGE TO THE
EQUIPMENT AND RELATED EXPENSES INCURRED BY NEFCO
RENTALS, resulting from any of the following circumstances:
640
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Fasteners
Anchors
Angle Iron (Angles) . . . . . . . . . . . 208
Anvil Pipe Hangers
. . . . . . . . . . . . . . 180-198, 217-219
AO SAFETY . . . . . . . . . . . . . . . . 608-609
Arbors, Hole Saw . . . . . . . . . . 305-307
ARC FLASH Protective Clothing
. . . . . . . . . . . . . . . . . . . . . . . . . 620-622
ASTM A193 B7 HEX Bolts/Studs
. . . . . . . . . . . . . . . . . . . . . . . . 24, 174
ASTM A193 B8 & B8M
Hex Cap Screws . . . . . . . . . . . . . . . . . . . . 25
ASTM A194 Grade 2H, 8 & 8M Nuts . . 31
ASTM A325 Structural Bolts . . . . 20
ASTM A490 Structural Bolts . . . . 21
ASTM A565 Grade DH
Structural Nuts . . . . . . . . . . . . . . . . 21
Aviation Snips . . . . . . . . . . . . . . . 444
Hartford, CT
800-969-0285
641
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
B-Line . . . . . . . . . . see Cable Tray, Strut
B-Line Hangers . . . . . . . . . see Hangers
B7 Bolts, Studs . . . . . . . . . . . . 24, 174
B8 & B8M Hex Bolts . . . . . . . . . . . . 25
Back to Back Strut . . . . . . . . . . . 131
Backing Pads . . . . . . . . . . . . 477, 479
Bags, Tools . . . . . . . . . . . . . . . . . . 457
Band Saw Lubricants . . . . . . . . . . 598
Band Saws . . see DeWalt & Milwaukee
Band Saws - Portable Electric . . . . 352
Bandsaw Blades . . . . . . . 353, 596-597
BANG-IT™ . . . . . . . . . . . . . . . . . . . . . . 87
Bantam Plug Wall Anchor . . . . . . 109
Bargard® Protector Caps . . . . . 627
Barricades . . . . . . . . . . . . . . . . . . . 628
Barricade Tape . . . . . . . . . . . . . . . 628
Barrier Flasher Light . . . . . . . . . 628
Bars, digging . . . . . . . . . . . . . . . . 565
Basket Clip . . . . . . . . . . . . . . . . . . . 115
Basket Tray . . . . . . . . . . see Cable Tray
Basket Type Pulling Grip Sets . . 384
Bat Wings (KX CADDY) . . . . . . . . . . 160
Bath Tissue . . . . . . . . . . . . . . . . . . 556
Batteries (Flashlight) . . . . . . . . 530
Battery Packs, Li-ion/nicad . . . 290-291
Battery Powered Cable Cutter
. . . . . . . . . . . . . . . . . . . . . . 395-396
BC60, BC61 (U-Bolt, Strut) . . . . . . . . 137
Beam Clamps
Adjustable . . . . . . . . . . . . . . . . . . . 196
C-Clamps . . . . . . . . . . . . . . . . 138, 188
Electrical Junior Top
. . . . . . . . . . . . . 138, 156, 188, 221
Ice-Tong Center Load . . . . . . . . . . 196
Malleable Iron . . . . . . . . . . . . . . . 188
Retaining Straps . . . . . . . . . . . 188-189
Rod Lock, CADDY . . . . . . . . . . . . . 127
U-bolt, (Strut), BC60, BC61 . . . . . . 137
Wide Mouth Top . . . . . . . . . . 138, 188
Beam Dimensions . . . . . . . . . . . . . 208
BeamWalk™ . . . . . . . . . . . . . . . . . . . 604
Bee killer . . . . . . . . . . . . . . . . . . . . 555
Bell Hanger (Copper - Van) . . . . . 219
Belleville Washers . . . . . . . . . . . . . 36
Bench Grinding Wheels . . . . . . . 484
Benders . . . . . . . . . . . . . . 361-365, 367
Bent Eye Bolts . . . . . . . . . . . . 177, 569
BESSEY Clamps . . . . . . . . . . . . 588-589
Beveled Square Washers . . . . . . . 21
Bi-Metal
Bandsaw blades . . . . . . . . . . . 353, 596
Hole Saws . . . . . . . . . . . 304-306, 308
Reciprocating Saws . . . . . 270, 347-350
Threaded
Rod
b
Safety
18-8 Stainless Bolts, 304 SS . . . . . 28
A193 B-7 - BOLTS . . . . . . . . . . . . . . . . 24
A193 B8/B8M Bolts . . . . . . . . . . . . . 25
A307 Grade B Bolts . . . . . . . . . . . . 23
A325 Flat Washers (F438) . . . . . . . . 39
A325 Structural Bolts . . . . . . . 20-21
A490 Structural Bolts . . . . . . . . . 21
A7 Acrylic Adhesive . . . . . . . . . . 77-78
A-Band Hanger . . . . . . . . . . . . . . . 187
Abrasive Belts - Aluminum Oxide 474
Abrasive Hand Pads . . . . . . . . . . . 472
ABRASIVES . . . . . . . . . . . . . . . 459-488
Absorbents . . . . . . . . . . . . . . . 556-558
AC Clamp-On Meters . . . 272, 402-405
Access Doors . . . . . . . . . . . . . 506-521
ACCO® . . . . . . . . . . . . . . see PEERLESS
Acid Brush . . . . . . . . . . . . . . . 487, 545
Acorn Cap Nuts - Brass Plated . . 55
Acoustical fasteners . . . 7, 102, 106
ACUDOR Access Doors . . . . . . 506-511
Adapters, Hose . . . . . . . . . . . . . . . 560
Adhesive / Epoxy Anchoring . . . 74-81
Adhesive Accessories . . . . . . . . 74-81
Adhesive Capsules . . . . . . . . . . . . . 76
Adjustable
Beam Clamps . . . . . . . . . . . . . 196-197
Pipe Roll Stand with Base . . . . 192-193
Pipe Saddle Support . . . . . . . . 194-195
Pipe Stanchion / Saddle . . . . . . 194-195
Side Beam Clamps . . . . . . . . . . . . . 196
Spud Wrench - Clik-Stop® . . . . . . . . 453
Wrenches . . . . . . . . . . . . . . . . . . . 453
Adjust-A-Fit® . . . . . . . . . . . . . . . . . 427
Adjust-A-Flange® . . . . . . . . . . . . . 427
Adjust-A-Rolls® . . . . . . . . . . . . . . . 427
Advance Support Products . . . 241
aickinstrut, fiberglass strut 150-151
Air Circulators, Industrial . . . . 562
Aircraft cable . . . . . . . . 189, 571-572
Aircraft Drill bits . . . . . . . . . . . . 299
all thread rod . . . . . . . . . . . . 171-178
Fiberglass Threaded Rod . . . . . . . . 151
Stainless Steel . . . . . . . . . . . . . . . . 173
ALLEN® Hex Keys . . . . . . . . . . . . . . . 58
Aluminum Oxide
Closed Coat Abrasive Belts . . . . . . . 474
Fiber Discs . . . . . . . . . . . . . . . . . . 478
Paper Sheets (AW-C & AW-D) . . . . . 473
Aluminum Pipe Wrench . . . . . . . . 442
aluminum strut . . . . . . . . . . . . . . 126
Anchor Bolts . . . . . . . . . . . . . 176-178
Anchor Bolt Sleeves . . . . . . . . . . 178
Anchor Hanging Systems
. . . . . . . . . . . . . . 82, 84, 91-99, 102
Anchor Kits - Plastic . . . . . . . 108-109
ANCHORS . . . . . . . . . . . . . . . 65-124
A7 Acrylic Adhesive . . . . . . . . . . . 77-78
Adhesive Accessories - Hole Plugs,
Brushes & Extension Tubing . . . . . 74-80
Adhesive Anchors . . . . . . . . . . . . 74-81
Bang-It™ . . . . . . . . . . . . . . . . . . . . . 87
Bantam™ Plastic Plug Anchors . . . . 109
C6 Epoxy Adhesive . . . . . . . . . . . . . 78
Calk-In™ . . . . . . . . . . . . . . . . . . . . 105
Chem-Stud™ Capsules . . . . . . . . . . . 76
Installation Tools . . . . . . . . . . . . . 76
Concrete Vertical Hanger
. . . . . . . . . . . 94, 91, 93-94, 98, 102
Anchors . . . . . . . . . . . . (continued)
Condrive . . . . . . . . . . . . . . . . . . . . 100
Double Expansion Shield . . . . . . . . 104
Dropins . . . . . . . . . . . . . . . . 90-92, 105
Dynabolt Sleeve Anchors . . . . . . . . . 85
Stainless Steel Sleeve Anchors . . . 84-86
G5 Epoxy Adhesive . . . . . . . . . . 75, 79
Hammer Capsules . . . . . . . . . . . . . . 76
Hex Coupling Nut Sleeve Anchors . . . 84
Hollow-Set Drop-In . . . . . . . . . . . . 105
Hollow Wall Anchor . . . . . . . . . 106-110
Multi-Set II Drop-In Anchors . . . . . . 92
Mushroom Head Spike® . . . . . . . . . 102
Mushroom Head Type 316 Stainless
Steel Spike® . . . . . . . . . . . . . 102
Rod Hanging - Pipe Spike® . . . . . . 93
Tie Wire Spike . . . . . . . . . . . . . . 102
Nylon Nailin™ . . . . . . . . . . . . . . . . . 103
Nylon Screens . . . . . . . . . . . . . . . . . 76
Plastic Anchor Kits . . . . . . . 48, 108-109
Power-Bolt® . . . . . . . . . . . . . . . . . . . 86
Power-Stud™ . . . . . . . . . . . . . . . . . . 82
Power-Stud™ SD1 . . . . . . . . . . . . . . 69
Power-Stud™ SD2 . . . . . . . . . . . . . . 68
Power-Stud™ SD4 . . . . . . . . . . . . . . 70
Power-Stud™ SD6 . . . . . . . . . . . . . . 70
Powder Actuated Tools . . 118-119, 123
P3500 . . . . . . . . . . . . . . . . . . . . 118
PA3500 . . . . . . . . . . . . . . . . . . . 118
P3602 . . . . . . . . . . . . . . . . . . . . 118
Powerfoam™ . . . . . . . . . . . . . . . . . . 81
Screw Anchor Expanders . . . . . . . . 105
Scru-Lead™ Anchors . . . . . . . . . . . 105
Single Expansion Shield . . . . . . . . . 104
Sleeve Anchors . . . . . . . . . . . 93, 84-86
Snake Anchors . . . . . . . . . . . . . . . . . 91
Spike Anchors . . . . . . . . . . . . . 93, 102
Flat Head Spike® . . . . . . . . . . . . 102
Installation Tools . . . . . . . . . 93, 102
SDS Stop Bit . . . . . . . . . . . . . . . . . . 92
Stainless Steel Screens . . . . . . . . . . 76
Steel Side Hanger . . . . . . . . . . . . 95-98
Steel Vertical Hanger . . . . . . . . . . 94-98
Stubby Screens . . . . . . . . . . . . . . . . 76
Swivel . . . . . . . . . . . . . . . . . . . . 95-96
T3 Tool . . . . . . . . . . . . . . . . . . 111-112
T3 Accessories . . . . . . . . . 112-113, 122
Trak-It Fastening Tools
. . . . . . . . . . . . . . 111, 114, 116-117
Pole Tools . . . . . . . . . 112, 114, 123
Battery . . . . . . . . . . . . . . . 111, 114
Tool . . . . . . . . . . . 111, 114, 116-117
Accessories . . . . . 111, 114, 116-117
Tapcon . . . . . . . . . . . . . . . . . . 89, 100
Trubolt™ Wedge Anchors . . . . . . 71, 83
Umbrella Inserts . . . . . . . . . . . . . . . 76
Undercut Anchors . . . . . . . . . . . . . . 73
Vertigo™ Anchor Hangers . . . . . . . 98-99
Wedge-Bolt® Anchors . . . . . . . . . 72, 88
410 Stainless Steel . . . . . . . . . . . 88
Carbon Steel Wedge-Bolt® BT . 72, 88
Carbon Steel Wedge-Bolt® OT . . . . 88
Carbon Steel Wedge-Bolt™ . . . 72, 88
Wood-Knocker™ . . . . . . . . . . . . . . . . 87
Wood Side Hanger . . . . . . . . . . . . 95-98
Wood Vertical Hanger . . . . . . . . . 94-98
Zamac Hammer-Screw® . . . . . . 103-104
Zamac Nailin™ . . . . . . . . . . . . . 103-104
Zip-It Wall Anchors . . . . . . . . . . . . 108
Anchors - At-a-Glance . . . . . . . . 66-67
Anchors, Fall Protection . . . . . 604
Rentals
A
Strut
index A - B
Fasteners
index B - C
B
c
(continued)
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Bins . . . . . . . . . . . . . . . . . . . . . . . . . 585
Binkley Clips . . . . . . . . . . . . . . . . . 140
Bits . . . . . . see Drilling Bits, High Speed
Bit Tips . . . . . . . . . . . . . . . . . . . 10, 315
Black Track Drive Pins . . . . . . . . 121
Blackies (Framer Screws) . . . . . . . . 4
Blades, Utility . . . . . . . . . . . . 351, 444
Block Wire Brush . . . . . . . . . . . . . 552
Blowers . . . . . . . . . . . . . . . . . . . . . 562
Blue Masonry Screws . . . . . . 100-101
BOCA Safety Nail PLate . . . . . . . . 213
Bolt Bags . . . . . . . . . . . . . . . . . . . . 457
Bolting Basics . . . . . . . . . . . . . . . . 17
Bolting Dimensions for Flanges 23
Bolts . . . . . see also Hex Cap Screws
A193 B7 . . . . . . . . . . . . . . . . . . . . . 24
A193 B8 & B8M . . . . . . . . . . . . . . . 25
A307 Grade B . . . . . . . . . . . . . . . . . 23
A325 Bolts, Nuts & Washers . . . . 20-21
A Bolts, Nuts & Washers . . . . . . . . 21
Carriage . . . . . . . . . . . . . . . . . . . . . 26
Corporation Eye . . . . . . . . . . . . . . . . 52
Cor-Ten . . . . . . . . . . . . . . . . . . . . . . 52
Elevator . . . . . . . . . . . . . . . . . . . . . . . 7
Flange A307 Grade B . . . . . . . . . . . . 23
Hanger . . . . . . . . . . . . . . . . . . . . . . 51
Heavy Hex A307 Grade B . . . . . . . . 23
Hex Cap Screws
Brass . . . . . . . . . . . . . . . . . . . . . . 53
Grade 2 . . . . . . . . . . . . . . . . . . . . 22
Grade 5 and 8 . . . . . . . . . . . . . . . 27
Stainless Steel 304 & 316 . . . . 28-29
Lag . . . . . . . . . . . . . . . . . . . . . . . . . 26
Metric, Specs and Markings . . . . . 60-61
Plow . . . . . . . . . . . . . . . . . . . . . . . . 52
Structural . . . . . . . . . . . . . . . . . . 20-21
Tap . . . . . . . . . . . . . . . . . . . . . . . . . 26
Tension Control (TC) . . . . . . . . . . . . . 18
Toggle . . . . . . . . . . . . . . . . . . . . . . 106
Bonded Sealing Washers . . . . . . . 39
Booms, Absorbents . . . . . . . . . . . 558
Boots, Rubber . . . . . . . . . . . . . . . . 607
BOSCH Bulldog . . . . . . . . . . . . . . . 318
Box Cutters . . . . . . . . . . . . . . 351, 444
Bracing Systems - Seismic . . . 226-229
Brackets . . . . . . . . . . . . . . . . 137, 207
Brass
Fasteners . . . . . . . . . . . . . . . . . . . 53-56
Plumb Bob . . . . . . . . . . . . . . . . . . 446
Bridle Rings . . . . . . . . . . . . . 113, 115
Bridle Saddle . . . . . . . . . . . . . . . . 113
Broad-Head Bull Pins . . . . . . . . . 457
Brooms & Brushes . . . . . 545, 451-553
Brushes . . . . . . . . . . see Pferd/Advance
Miscellaneous Paint . . . . . . . . 487, 545
Nylon Abrasive . . . . . . . . . . . . . . . 485
Tube . . . . . . . . . . . . . . . . . . . . . . . 488
Wire . . . . . . . . . . . . . . . . . . . . 485-487
Brute® Mop Bucket . . . . . . . . . . . . 550
Buckets . . . . . . . . . . . . . . . . . 550, 563
Builder's Board . . . . . . . . . . . . . . 540
Buildex . . . . . . . . . . . 12-15, 94-97 244
Bull-Pins . . . . . . . . . . . . . . . . . . . . 457
Bulldog . . . . . . . . . . . . . . . . . . . . . 318
Bungie Cords . . . . . . . . . . . . . . . . 538
Buried Line Locator . . . . 406, 437-438
Burrs, Carbide . . . . . . . . . . . . . . . 482
Bushings -Metal Stud Punches . . . . . . 374
BX Clip . . . . . . . . . . . . . . . . . . . . . . . 115
Rentals
642
C-Clamps . . . . . . . . . . . . . 188, 587-588
C-Port . . . . . . . . . . . . . see Dura-Block
C6 Epoxy Adhesive . . . . . . . . . . . . . . 78
Cabinet Screws . . . . . . . . . . . . . . . . . 8
Cable
Cutter . . . . . . . . . . . . . . . . . . . 392-397
Feeder . . . . . . . . . . . . . . . . . . . . . . 382
Grab, Fall Protection . . . . . . . . . . . 606
Pullers . . . . . . . . . . . . . . . 368, 378-382
Pulling Lubricant . . . . . . . . . . . . . . 385
Racks . . . . . . . . . . . . . . . . . . . 386-387
Tray . . . . . . . . . . . . . . . . . . . . . 146-149
Tray Cutter . . . . . . . . . . . . . . . . . . 396
Wire Rope . . . . . . . . . . . . 189, 571-573
Cable hoist . . . . . . . . . . . . . . . 576-578
Cable TieS . . . . . . . . . . . . . . . . . . . . 541
Cable Tray . . . . . . . . . . . . . . . . . . 146-149
CADDY®
“Colorado Jim” Cable Support NEC
Compliance for Metal Stud . . . . . 158
1/4 Electrical Junior Top Beam Clamp
. . . . . . . . . . . . . . . . . . . . . 156, 188
1/4” - 3/8” Steel Beam Clamp 156, 189
Bat Wings (KX) . . . . . . . . . . . . . . . . 160
Beam Clamps . .127, 156-157, 188-189
Box Mounting Brackets . . . . . . 158-159
Cablecat Pulley . . . . . . . . . . . . . . . 164
Cablecat Vertical Backbone
Cable Support . . . . . . . . . . . . . . 164
Cablecat Wide Base Cable Support
Clips . . . . . . . . . . . . . . . . . . . . . 164
Slick™ Strut Nut . . . . . . . . . . . . . . . 135
Cat-CM Cable Support System . . . . 164
CD Series . . . . . . . . . . . . . . . . . . . 161
Conduit Clamps . . . . . . . . . . . . 161-162
Conduit Hangers from Flange, Wire
or Rod (KX) . . . . . . . . . . . . . . . . 160
Flange Mount Conduit Clip Snap Close . . . . . . . . . . . . . . . . . 160
Flexible Conduit & Cable Hanger . . 160
Flexible Conduit Hangers from
Drop Wire . . . . . . . . . . . . . . . . . 162
Hammer on Plain & Threaded
Rod Hangers . . . . . . . . . . . . . . . 156
Hammer-On Flange Clip . . . . . . 156-157
ISN Smart Nut . . . . . . . . . . . . . . . . 165
ISSP Strut Plate . . . . . . . . . . . . . . . 165
Jiffy Clips . . . . . . . . . . . . . . . . . . . . 145
KX (Bat Wing) . . . . . . . . . . . . . . . . 160
Lay-in & Troffer Pipe Support Clips 163
Minerallac® Malleable Beam Clamp . 138
Mounting Bracket for any
Electrical Box . . . . . . . . . . . . . . . 158
Multi-Flange Rod Hanger . . . . . . . . 157
One Piece Strut Clamp . . . . . . . . . . 162
Pipe Sleeve Positioner . . . . . . . . . . 145
Pyramid . . . . . . . . . . . . . . 155, 238-241
Ridgid Pipe Clamp . . . . . . . . . . . . . 162
Rod Lock . . . . . . . . . . . . . . . . . . . . 127
Screw Box Bracket for Between Studs . 158
Slip-On Nut . . . . . . . . . . . . . . . . . . 173
Snap-on Fixture / Box Hanger . . . . 163
Speed Link . . . . . . . . . . . . . . 168, 235
Strap Hanger Clips . . . . . . . . . . . . . 165
T-Grid Box Hanger . . . . . . . . . . . . . 163
Toggles . . . . . . . . . . . . . . . . . . . . . 168
Two-Hole Conduit Straps . . . . . . . . 145
Wire Hangers . . . . . . . . . . . . . . . . . 160
CADWELD® Molds . . . . . . . . . . 503-505
Cadweld™ Plus . . . . . . . . . . . . 503-505
Weld Metal - Traditional . . . . . . . . . 505
Calk-In™ . . . . . . . . . . . . . . . . . . . . . 105
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
Cam & Groove Quick Lock Adapter
. . . . . . . . . . . . . . . . . . . . . . . . . 560
Canvas Tool Bags . . . . . . . . . . 457-458
Carabiners . . . . . . . . . . . . . . . . 603-606
Carbide Bits . . . . . . . . . . 317-323, 327
Carbide Burrs . . . . . . . . . . . . . . . . 482
Carbide Core Bits . . . . . . . . . . . . . 327
Carbide Saw Blades . . . . . . . . . . . 357
Carbide Tipped Bits . . . . . . . . 326-327
Carbide Tipped Hole Cutters . . . . 302
Carbide Tipped Hole Saws . . . . . . 308
Carpenter Pencils . . . . . . . . . . . . 542
Carpenter Square . . . . . . . . . . . . 445
Carpet Shield® . . . . . . . . . . . . . . . 539
CARR LANE® . . . . . . . . . . . . . . . . . . 585
Carriage Screws (Bolts) . . . . . . . . 26
Carrier supports . . . . . . . . . . . . . 216
Cartridge Rolls / Mandrels . 481-482
Cartridges, Respiratory . . . . . . . 613
Carts . . . . . . . . . . . . . . . . 547-548, 567
Caster Sets . . . . . . . . . . . . . . . 532-534
Cat-CM Cable Support System . . 164
Caulk, Firestop . . . . . . . . . . . . 490-502
Caulk, silicone . . . . . . . . . . . . . . . 544
Caulk In Anchors . . . . . . . . . . . . . 105
Caulking Guns . . . . . . . . . . . 544, 591
Caution SIGNS . . . . . . . . . . . . . 625-626
Caution Tape . . . . . . . . . . . . . . . . . 628
Ceiling Clip Assemblies . . . . . . . . . . .
. . . . . . . . . . . . . 113, 115, 122, 124
Ceiling Hanger Wire . . . . . . . . . . . 124
Cement Board Screws . . . . . . . . . . . 8
Cement
Construction . . . . . . . . . . . . . . . . 566
Leak-Stopper . . . . . . . . . . . . . . . 566
Mix . . . . . . . . . . . . . . . . . . . . . . 566
Non-Shrink Grout . . . . . . . . . . . . 566
Cendrex Access Doors . . . . . 512-521
Center Load Beam Clamps . . . . . 196
Center Nuts . . . . . . . . . . . . . . . . . . 479
CEP
Cart Lights . . . . . . . . . . . . . . . . . . . 528
GFCI . . . . . . . . . . . . . . . . . . . 527, 591
Incandescent Light Bulb . . . . . . . . . 530
Light Strings . . . . . . . . . . . . . . . . . 528
Metal Halide Lights . . . . . . . . . . . . 528
Portable Power Center . . . . . . . . . . 531
Portable Quartz Floodlights . . . . . . 528
Quartz & Metal Halide Light Bulbs
. . . . . . . . . . . . . . . . . . . . . 528, 530
Utility Light . . . . . . . . . . . . . . . . . . 528
Chain & Accessories . . . . . . . 574-575
Chain Hoists . . . . . . . . . . . . . . 576-578
Chain Slings . . . . . . . . . . . . . . . . . 579
Chain Wrench . . . . . . . . . . . . . . . . 442
chain Vises . . . . . . . . . . . . . . . . . . . 424
Chalk Line Reels/ Refills . . . . . . . 446
CHAMPION Cutting Tools
Aircraft Drill Bits . . . . . . . . . . . . . . 299
Carbon Steel Taps . . . . . . . . . . . . . 301
Cobalt Drill Bits . . . . . . . . . . . . . . . 299
Cobalt S&D Drill Bits - 1/2” Shank . . 299
Double End Drill Bits . . . . . . . . . . . 300
Drill Bit Sets . . . . . . . . . . . . . . . . . 297
Fractional Drill Bits . . . . . . . . . . . . 299
Letter Size Drill Bits . . . . . . . . . . . . 299
Number Size Drill Bits . . . . . . . . . . 299
Reduced Shank Drill Bits . . . . . . . . 300
RotoBrute® Carbide Tipped Hole Saws . 302
Silver & Deming Drills - 1/2” Shank 299
Stub Length Drill Bits . . . . . . . . . . . 300
Taps . . . . . . . . . . . . . . . . . . . . 300-301
Channel . . . . . . . . . . . . . . . . see strut
Assembly - “Strong Back” . . . . . . . 208
Fittings . . . . . . . . . . . . . . 127, 137-168
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
D-Handle Shovels . . . . . . . . . . . . . 564
D-Ring Expander . . . . . . . . . . . . . . 600
danger signs . . . . . . . . . . . . . . 625-626
Danger Tapes . . . . . . . . . . . . . . . . . 628
Deburring Tool . . . . . . . . . . . . . . 374
Deck Screws . . . . . . . . . . . . . . . . . . . 6
Deck Scrub Brush . . . . . . . . . . . . 552
Deep Cut Electric Band Saws . 352-353
Deep Strut . . . . . . . . . . . . . . . . . . . 131
Degreasers . . . . . . . . . . . . . . . . . . 554
Dektite™ Pipe Flashings . . . . . . . . 244
demolition blades . . . . . . . . 248, 349
Demolition Hammers . . . 320-324, 328
Depressed Center Grinding Wheels . 460
Design, Pipe Hangers, Strut
. . . . . . . . . . . . . . . . . Preface B, 208
DEWALT
14” Chop Saw . . . . . . . . . . . . . . . . 359
14” Multi-Cutter™ Dry Cut Saw . . . . 358
36V NANO™ Li-Ion Cordless Tools . 247-248
4-1/2” Small Angle Grinder . . . . 340-341
Battery Packs . . . . . . . . . . . . . 290-291
Chargers . . . . . . . . . . . . . . . . . 290-291
Compressors . . . . . . . . . . . . . . . . . 450
Corded Tools . . . . . . . . . . . . 293-297
Close Quarter Drills . . . . . . . . . . 297
Demolition Hammer . . . . . . . . . . 328
Drills . . . . . . . . . . . . . . . . . . 291-293
Impact wrenches . . . . . . . . . . . . 316
Pistol Grip Drills . . . . . . . . . . 292-293
Right Angle Drills . . . . . . . . . 295-296
Rotary Hammers, SDS . . . . . 318-320
Rotary Hammers, SDS-MAX . 324-325
Rotary Hammers, Spline . . . . . . . 325
Spade Handle Drills . . . . . . . . . . 294
Cordless Tools . . . . . . . . . . . . 246-290
Li-Ion
12V Max™ Sub-Compact . . . . 275-276
18V NANO™ . . . . . . . . . . . . . 264-266
28V NANO™ . . . . . . . . . . . . . 253-254
36V NANO™ . . . . . . . . . . . . . 247-248
Hartford, CT
800-969-0285
643
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
D
Tools
Crimped Wire
Cup Brushes . . . . . . . . . . . . . . . . . 486
End Brushes . . . . . . . . . . . . . 485, 487
Wheel Brushes - 4” Diameter . 483, 485
Wheels for Small Grinders . . . . . . . 487
Crimping Tools . . . . . . . . 397, 399-400
Cross-Arm Strap . . . . . . . . . 601, 604
Crowbar . . . . . . . . . . . . . . . . . . . . 444
Cups, drinking . . . . . . . . . . . . . . . 561
Cup Brushes . . . . . . . . . . . . . . . . . 486
Curbs, Rooftop supports . . 236-242
Cured Concrete Wet Blades . . . . 331
Curing Blankets . . . . . . . . . . . . . . 530
current tool . . . . . . . . . . 367-368
Benders . . . . . . . . . . . . . . . . . . . . . 367
Cable Pullers . . . . . . . . . . . . . . . . . 368
Knockout Punch & Die sets . . . . . . 368
Curved Handle Scratch Brush . . 467
Cush-a-Clamp® Hydrazorb . . . . . 141
Cush-A-Claw Strut Clamp . . . . . . 144
Cush-A-Strip . . . . . . . . . . . . . . . . . 140
Custom Fabrication . . . . . . . . . . . 208
Cut End Mops . . . . . . . . . . . . . . . . 550
Cut-Off Wheels . . . . . . . . . . . . 463-465
Cut-Out Tool . . . . . . . . . . . . . . . . . 282
Cutting Lubricants . . . . . . . . . . . 598
Cutting Oil . . . . . . . . . . . . . . . . . . 407
cutting tools - bits . . . see Champion
Cutting Wheels . . . . 269, 421, 461-464
Cylinder Carts . . . . . . . . . . . . . . . 547
Abrasives
Channel . . . . . . . . . . . . . . . . (continued)
Iron . . . . . . . . . . . . . . . . . . . . . . . . 208
Nuts . . . . . . . . . . . . . . . . . . . 127, 134
Strut Sizes . . . . . . . . . . . . . . . . . . . 128
CHANNELLOCK . . . . . . . . . . . . . . . . 457
Charger - Multi-Bay . . . . . . . . . . 252
Chargers - li-ion/nicad . . . . 290-291
Chem-Stud Epoxy Anchors . . . . . . 76
Installation Tool . . . . . . . . . . . . 76
Chemical spill pads, booms . . . . 558
Chemical sprayer . . . . . . . . . . . . . 569
Chicago Mechanical Bender . . . 361
Chip Brush . . . . . . . . . . . 487, 545, 591
Chipping & Demolition Hammers
. . . . . . . . . . . . . . . . . . 320, 324-328
Coated Gloves . . . . . . . . . . . . . . . . 617
Construction Signs . . . . . . . . . . . 625
Chop Saws . . . . . . . . . . . . . . . . 358-359
Chop Saw Wheels . . . . . . . . . 359, 464
CIP - Certified Insulated Products
ARC Protective Clothing . . . . . . 620-622
Electrician’s Service Pouch . . . . 620-622
Flash Apparel Protection . . . . . 620-622
Flash Protection Arc Shields . . . 620-622
High Voltage Glove Kits . . . . . . 620-622
Meter Service Belt Pouch . . . . . 620-622
Type I Insulating Blankets . . . . . 620-622
Circular Saws . see DeWalt, Milwaukee
Clamp-On Meters . . . . . . 272, 402-405
Clamps
"C" Clamps . . . . . . . . . . . . . . . . 587-588
Beam Clamps . . . . . 138, 221, 188, 197
Cushion Clamps . . . . . . . . . . . . 141-142
EMT Clamps . . . . . . . . . . . . . . . . . 140
Pipe Clamps . . . . . . . . . . . . . . 140-145
Purlin Clamps . . . . . . . . . . . . . . . . 189
Riser Clamps . . . . . . . . . . . . . . . . . 185
Strut Clamps . . . . . . . . . . . . . . 139-165
Welding Clamps . . . . . . . . . . . . . . . 456
Classic Bender No. 555C . . . . . . . 363
Clean Room Ratchet Shears . . . 422
Clean Room Tacky Mats . . . . . . . 556
Cleaners . . . . . . . . . . . . . . . . . 554-555
Clevis Grab Hooks . . . . . . . . . . . . 575
Clevis Hangers . . . . . . . . . . . . 185-187
With Welded Shield . . . . . . . . . . . . 187
Clevis Roller Hangers . . . . . . . . . 190
Clevis Slip Hooks . . . . . . . . . . . . . 575
CLIC . . . . . . . . . . . . . . . . . . . . . . . . . 143
clips, strut . . . . . . . . . . . . . . . 140-145
"66" Clip (Weld Beam Attach) . . . . . 197
Closure (Strut) Strip . . . . . . . . . . 133
CM . . . . . . . . . . . . . . . . . . . . . . . . . . .
Puller . . . . . . . . . . . . . . . . . . . 576-578
Series 633 Wide Range Trolley . 576-578
CZ92 Universal Plate Clamps . . 576-578
Hand Chain Hoist . . . . . . . . . . . 576-578
Lodestar Electric Chain Hoist . . 576-578
Hoists . . . . . . . . . . . . . . . . . . . 576-578
Coach Screw Hanger Bolts . 51, 217
Cobalt Drill Bits . . . . . . . . . . . . . 299
Coil Thread Nuts . . . . . . . . . . 33, 171
Coil Thread Rod . . . . . . . . . . . . . . 171
Cold Weather Extension Cord
. . . . . . . . . . . . . . . . . . . . . 527, 591
Cold Weather Supplies . . . . . 614-618
Collars, Firestop . . . . . . . . . . . . . 492
Colorado Jim Cable Support . . . 158
Combination locks . . . . . . . . . . . 537
Combo
Drill/Tap Bit - Greenlee . . . . . . . . . . 301
Screwdriver Set - 7-Piece . . . . . . . 455
Combo . . . . . . . . . . . . . . . . . (continued)
Squares . . . . . . . . . . . . . . . . . . . . . 445
Wrenches . . . . . . . . . . . . . . . . 452-455
Come-Alongs . . . . . . . . . . . . . . . . . 580
Commercial Industrial Hose
. . . . . . . . . . . . . . . . . . . . . . 560-561
Compact Ratchet Cable Cutter . . . . 394
Compact Band Saw . . . . . . . . . . . 261, 352
Compressed Air . . . . . . . . . . . . . . 555
compressors . . . . . . . . . . . . . . . . 450
Concrete
Clevis Plate . . . . . . . . . . . . . . . . . . 199
Curing Blankets . . . . . . . . . . . . . . . 530
Insert Boxes . . . . . . . . . . . . . . . . . 199
Insert Strut . . . . . . . . . . . . . . . . . . 133
Inserts . . . . . . . . . . . . . . . . . . . . . . 199
Lug Plate . . . . . . . . . . . . . . . . . . . . 199
Rod Attachment Plate . . . . . . . . . . 199
SAKRETE . . . . . . . . . . . . . . . . . . . 566
Vibrator . . . . . . . . . . . . . . . . . . . . . 282
Condrive (Tapcon Tool) . . . . . . . 100
Conduit & Pipe Storage Rack . . . 388
Conduit
Benders . . . . . . . . . . . . . . . . . . 361-367
Clamps & Clips . . . . . . . . . . . . 139-141
Clip Assemblies . . . . . . . . 113, 122-124
Hanger . . . . . . . . . . . . . . . . . . . . . 160
cones, traffic . . . . . . . . . . . . . . . . 628
Confined Space 3-Way System . . . 606
Connecting Links . . . . . . . . . . . . . 575
Constant Supports . . . . . . . . . . . 204
Construction Grout . . . . . . . . . . 566
Continuous Concrete Insert 133, 199
Contractor
Lifts . . . . . . . . . . . . . . . . . . . . . . . . 428
Trash Bags . . . . . . . . . . . . . . . 549, 592
Wheelbarrows . . . . . . . . . . . . . . . . 566
Work Centers . . . . . . . . . . . . . . 533-535
Convolute Wheels . . . . . . . . . . . . 480
Coolers . . . . . . . . . . . . . . . . . . . . . 561
COPE Cable Tray . . . . . . . . . . . 146-149
Copper Natick Hangers . . . . . . . . 219
Copper Van Hanger (Bell Type) . . 219
Copper Tubing Cutter, M12 . . . . 269
CordED Tools . . see DeWalt & Milwaukee
Cordless Tools see DeWalt & Milwaukee
Core Bits, Carbide . . . . . . . . . . . . 327
Core Bits, Diamond . . . . . . . 335, 338
Core Rigs . . . . . . . . . . . . . . . . . 335-338
Corn broom . . . . . . . . . . . . . . . . . 551
Corporation Eye Bolts
(TIE BOLT) . . . . . . . . . . . . . . . . 52, 243
Corten T-Head Bolts . . . . . . . 52, 243
Cotter Pins . . . . . . . . . . . . . . . . . . . 58
Cotton Gloves . . . . . . . . . . . . . . . 616
Counter Brushes . . . . . . . . . . . . . 552
Countersunk Finish Washers 39, 55
Coupling Nuts . . . . . . . . . . . . . . . . 33
cover, hole-in-one . . . . . . . . 331, 540
Coveralls . . . . . . . . . . . . . . . . . . . . 619
Cracked Concrete Approved
Anchors . . . . . . . . . 68-75, 80, 91, 98
Crayons, Lumber . . . . . . . . . . . . . 542
CRC
2-26 Multi-Purpose Lubricant . . . . . 555
Compressed Air . . . . . . . . . . . . . . . 555
Cutting Oil . . . . . . . . . . . . . . . . . . . 555
Hand Cleaner with Pumice . . . . . . . 554
Heavy Duty Degreaser . . . . . . . . . . 554
Hydroforce All Purpose Cleaner . . . 554
Screwloose . . . . . . . . . . . . . . . . . . 555
Sunswipe ™ Sunscreen Towelette . . . 554
Wasp & Hornet Killer Plus . . . . . . . 555
Crescent Wrenches . . . . . . . . . . . 453
Cricket . . . . . . . . . . . . . . . . . . . . . . 388
OnSite
Supply
(continued)
Safety
C
Rentals
index C - D
Fasteners
index D - F
D
(continued)
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Rentals
DEWALT . . . . . . . . . . . . . . (continued)
NiCd
12V NiCd . . . . . . . . . . . . . . . . . . 287
14.4V XRP™ NiCd . . . . . . . . . 285-286
18V XRP™ NiCd . . . . . . . . . . 281-284
24V NiCd . . . . . . . . . . . . . . . . . . 277
7.2V NiCd . . . . . . . . . . . . . . . . . 288
9.6V NiCd . . . . . . . . . . . . . . . . . 288
Circular Saw . . . . . . . . . . . . . . . . . 254
Cut-Out Tool . . . . . . . . . . . . . . . . . 282
Deck / Drywall Screwdriver . . . . . . . 314
Deep Cut Variable Speed Band Saw 353
Demolition Hammers . . . . . . . . 320-328
Die Grinder . . . . . . . . . . . . . . . . . . 339
Drills
Close Quarter Drills . . . . . . . . . . 297
Pistol Grip Drills . . . . . . . . . . 292-293
Right Angle Drills . . . . . . . . . . . . 295
Spade Handle Drills . . . . . . . . . . 294
Generators . . . . . . . . . . . . . . . . . . 450
Grinders . . . . . . . . . . . . . . . . . 340-344
Impact Wrenches . . . . . . . . . . . . . . 316
Jig Saw . . . . . . . . . . . . . . . . . 261, 345
Laser Levels . . . . . . . . . . . . . . . . . . 447
Lights/Radios . . . . . . . . . . . . . . . . . 284
Pilot Point® Gold Twist Drill Bits . . . . 297
Reciprocating Saw . . . . . . . . . . . . . 346
Rotary Hammers, SDS . . . . 87, 318-320
Rotary Hammers, SDS-MAX . . . . . . 324
Rotary Hammers, Spline . . . . . . . . . 325
Storage Chests . . . . . . . . . . . . . . . 536
Diamond Core Bits . . . . . . . . 335, 338
Diamond Coring Motors / Rigs
& Accessories . . . . . . . . . . . 335-338
Diamond 4-Way Safety Plate . . . . 208
DIAMOND PRODUCTS
Concrete Blades . . . . . . . 331, 466-467
Dry Diamond Core Bits . . . . . . . . . 335
Dry Tuck Pointing Blades . . . . . . . . 466
Impregnated Yellow Core bits . . . . . 335
Lion GP Diamond Blades . . . . . . . . 466
M-4 Drill Rig Hand Held Core Motor 335
Multi-Purpose Contractors Blades . . 466
Tiger Tuck Pointing Diamond Blades . . . . 466
Premium Black Core bits . . . . . . . . 335
Segmented Dry High Speed Blades . 331
SpeediCut Gas Saw . . . . . . . . . . . . 331
WEKA Hand Held Core Drill . . . . . . 338
Diaphragm Pumps . . . . . . . . . . . . . 559
Die Heads / Die Head Racks . . 412-413
Dieless Crimper . . . . . . . . . . . . . . . 399
DiesEl Fuel Cans . . . . . . . . . . . . . . 563
Digging Bars . . . . . . . . . . . . . . . . . 565
Digital Electrical Tester . . . . 403-405
Digital Multimeter . . . . . . . . . 403-404
Dikes . . . . . . . . . . . . . . . . . 390-391, 558
Discharge Hose . . . . . . . . . . . . . . . 560
Disposable Clothing . . . . . . . . . . 619
Disposable Gloves . . . . . . . . . . . . 617
Disposable Respirators . . . . . . . 612
Double End Drill Bits . . . . . . . . . 300
Double End Studs . . . . . . . . 175, 177
Double Rod Rollers . . . . . . . . . . 190
Dowel Pins . . . . . . . . . . . . . . . . . . . 58
Drain Cleaners . . . . . . . . . . . . . . 441
Drain & sewer inspection . . . 430-436
Draw Studs for Knockouts . 372-373
Drift Fence . . . . . . . . . . . . . . . . . . 566
Drill & Tap Sizes . . . . . . . . . . . . . . 300
Drills . . . . . . . . see DeWalt & Milwaukee
Drill Bits
see High Speed, Champion & Carbide
Flat Boring, Spade . . . . . . . . . . . . . 298
644
Drill Bits . . . . . . . . . . . . . . . (continued)
Auger/Nail-Eaters . . . . . . . . . . . . . . 309
VariBit/Step/UniBit . . . . . . . . . . . . . 303
Drive Extension . . . . . . . . . . . . . . 453
Drive Pins 113, 114, 116, 117, 121-122
Drive Screws . . . . . . . . . . . . . . . . . 217
Driver / Drills . see DeWalt & Milwaukee
Drivers’ Gloves . . . . . . . . . . . . . . . 615
Drop-In Anchors . . . . . . . . 90-92, 105
Bits (Stop-Bit) . . . . . . . . . . . . . . 92 322
Setting Tool . . . . . . . . . . . . 90, 92, 105
Drop Lights . . . . . . . . . . . . . . . . . . 527
Drum Top Pads . . . . . . . . . . . . . . . 558
Dry Cut Metal Blades . . . . . . . . . 357
Dry Cut Saws . . . . . . . . . . . . . . . . . 358
Dry Diamond Core Bits . . . . 335, 338
Dry Tuck Pointing Blades . . . . . . 466
Dry Turbo Blades . . . . . . . . . . . . . 466
Drywall Screwdriver . . . . . . 313-314
Drywall Screws . . . . . . . . see Screws
DUC Lug Washers . . . . . . . 39, 52, 243
Duct Covers . . . . . . . . . . . . . . . . . 539
Duct Lifts . . . . . . . . . . . . . . . . . . . . 546
Duct Spacers . . . . . . . . . . . . . . . . . 153
Duct Tape . . . . . . . . . . . . . . . 541, 592
Dura-Block, B-Line . . . 155, 236-237
DURACELL® Procell® Batteries . . 530
Dura-Web Nylon Slings . . . . . 581-582
Dust Pans . . . . . . . . . . . . . . . . . . . . 551
Cement Board Screws . . . . . . . . . . . 8
Dust Shield™ Adjustable Poles . . 538
DVD/video Recorder . . . . . . . . 430-433
Dymo Drills . . . . . . . . . . see Core Rigs
Dynabolt Sleeve Anchors . . . . . . . 85
E
E-Z Pads (Vibration Isolation)
. . . . . . . . . . . . . . . . . . . . . . . . . 230
E-Z Path Firestopping . . . . . . 498-499
EAGLE Type I Safety Cans . . . . . . . 563
Earmuffs . . . . . . . . . . . . . . . . 607, 610
Earplugs . . . . . . . . . . . . . . . . . . . . 607
Electric Chain Hoists . . . . . . . . . 578
Electric Pumps . . . . . . . . . . . . . . . 559
Electrical
Box Mounting Bracket . . . . . . 158-159
Extension Cords . . . . . . . . . . . 527, 591
Power distribution . . . . . . . . . . . . . 531
Protective Clothing . . . . . . . . . . 620-622
Tape (Black, Colors, Phase) . . . . . . 541
Testers . . . . . . . . . . . . . . . . . . 401-406
Electrician’s Service Pouch . . . . 458
Electromagnetic Drill Presses
Drill Motors & Bases . . . . 332-333
Elevator Bolts . . . . . . . . . . . . . . . . . 7
Elongated Clevis Hanger . . . . . . 187
Empire . . . . . . . . . . . . . . . . see Hangers
EMT Straps . . . . . . . . . . . . . . . . . . . 148
Emlok sprinkler ring . . . . . . . . . 221
End Brushes - Crimped Wire 485-487
End Caps, Strut . . . . . . . . . . . . . . . 138
End Pipe Wrench . . . . . . . . . . . . . . 442
Engineering . . . . . . . . . . . . . . . . . . . . .
Pipe Hangers, . . . . . . Preface B, 205-206
Hangers . . . . . . . . . . . . . . . . . . 205-206
Strut Systems . . . . . . Preface B, 205-206
Supports . . . . . . . . Preface B, 205-206
Technical Services . . . . . . . . . . 205-206
Entrance Mats . . . . . . . . . . . 539, 556
EPCON®
A7 Acrylic Adhesive . . . . . . . . . . . . 77
Adhesive Accessories - Hole Plugs,
Brushes & Extension Tubing . . . . . 74-80
Adhesive Anchors . . . . . . . . . . . . 74-81
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
EPCON® . . . . . . . . . . . . . . . (continued)
At-a-Glance . . . . . . . . . . . . . . . . . 66-67
C6 Epoxy Adhesive . . . . . . . . . . . . . 78
G5 Epoxy Adhesive . . . . . . . . . . . . 77
Nylon Screens . . . . . . . . . . . . . . . . . 76
Stainless Steel Screens . . . . . . . . . . 76
Stubby Screens . . . . . . . . . . . . . . . . 76
Umbrella Inserts . . . . . . . . . . . . . . . 76
Erico . . . . . . . . . . . see Caddy, Hangers
Expansion Anchors / Shields . . . 104
Extended Pipe Clamps . . . . . . . . . 198
Extension
Cords . . . . . . . . . . . . . . . . . . 527, 591
Ladder . . . . . . . . . . . . . . . . . . . . . . 525
Eye & Skin Flush Stations . . . . . . 618
Eye Bolts . . . . . . . . . . . . . . . . . 569-570
Eye Lag Screws . . . . . . . . . . . . . . . . . 7
Eye Rod Plain/Welded . . . . . . . . . 219
Eye Sockets . . . . . . . . . . . . . . . . . . 219
Eye to Eye Turnbuckles . . . . . . . . 568
Eye Wear . . . . . . . . . . . . . . . . . . 608-609
Exo-thermic welding . . . . . . . 503-505
Extension Piece . . . . . . . . . . . . . . . 219
exit signs . . . . . . . . . . . . . . . . . . . . 626
Express, sammy's . . . . . . . . . . . . 96-97
E-Z Pads (Vibration Isolation)
. . . . . . . . . . . . . . . . . . . . . . . . . 230
EZ Reach™ Fish Stix . . . . . . . . . . . . 376
F
F&M Hanger Flange Wall Plate . . 217
F&M Split Ring Hanger (Hinge Type) 217
F438 Structural Flat Washers . . . 39
Fabrication, Pipe Hangers . . . . . 206
Faceshields . . . . . . . . . . . . . . . . . . 610
Fall Protection . . . . . . . . . . . 600-606
Fall Protection Kits . . . . . . 600, 602
Fans . . . . . . . . . . . . . . . . . . . . . . . . 562
Fastener I.D. Guides . . . . . . . . . 11, 17
FASTENERS . . . . . . . . . . . . . . . . . . 1-64
Gas & Powder Actuated . . . . . . 111-124
Fatigue Matting . . . . . . . . . . . . . . 567
FatMax® by Stanley . . . . . . . . 443-446
Fence Posts . . . . . . . . . . . . . . . . . . 566
Fencing . . . . . . . . . . . . . . 566-567, 594
Fender Washers . . . . . . . . . . . . 36, 39
Fiber Cement Board Screws . . . . . . 8
Fiber Discs - Aluminum Oxide . . 478
Fiberglass
Cable Tray . . . . . . . . . . . . . . . . . . . 147
Extension Ladder . . . . . . . . . . . . . . . . 525
Step Ladder . . . . . . . . . . . . . . . . . . 524
Strut System . . . . . . . . . . . . . . 150-151
Threaded Rod . . . . . . . . . . . . . . . . 151
Field Office Storage . . . . . . . 532-536
Filters, Respiratory . . . . . . . . . . . 613
Filters, vacuum . . . . . . . . . . . . . . . 537
Fire Extinguishers . . . . . . . . . . . . 627
Fire extinguisher signs . . . . . . . . 626
Fire Rated Access Doors
. . . . . . . . . . . . . . 509, 516, 517-518
Firestop . . . . . . . . . . . . . . . . 490-502
Bags . . . . . . . . . . . . . . . . . . . . . . . 502
Cast-In Place Sleeves . . . . 231, 494-495
Coatings . . . . . . . . . . . . . . . . . 490-502
Collars . . . . . . . . . . . . . . . . . . . . . . 492
Mortar . . . . . . . . . . . . . . . . . . 497, 501
Pillows . . . . . . . . . . . . . . . . . . 493, 502
Putties . . . . . . . . . . . . . . . . . . . . . . 493
Putty Pads . . . . . . . . . . . . . . . . . . . 493
Sealants . . . . . . . . . . . . . . . . . 490-502
First Aid Kits . . . . . . . . . . . . . . . . . 618
Fish Line . . . . . . . . . . . . . . . . . . . . . 376
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
G
G5 Epoxy Adhesive . . . . . . . . . . . . 79
Garbage Cans, Bags . . . . . . . 549, 592
Garden Hose . . . . . . . . . . . . . . . . . 561
Garden Rake . . . . . . . . . . . . . 565, 593
Gas Cans . . . . . . . . . . . . . . . . . 563, 595
Gas Fastening Systems . . . . . 111-117
Gas Pumps . . . . . . . . . . . . . . . . . . . 559
Gas Saw - Cut-off Wheels . . . . . . 331
Gas Saws . . . . . . . . . . . . . . . . . . . . 331
Gas Tools . . . . . . . . . . . . . . . . 111-117
Gaskets . . . . . . . . . . . . . . . . . . . . . . . 23
Gator™ Battery Tools . . . . . . 395-397
Gatorade . . . . . . . . . . . . . . . . . . . . 561
Geared Threaders . . . . . . . . . . . . 412
generators . . . . . . . . . . . . . . . . . . 450
genie lift (see Sumner) . . . . . . 546-547
GFCI . . . . . . . . . . . . . . . . . . . . 527, 591
Girder Grip . . . . . . . . . . . . . . . . . . 604
Glass Cleaner . . . . . . . . . . . . . . . . 554
Glasses, Safety . . . . . . . . . . . . 608-609
Gloves . . . . . . . . . . . . . . . . . . . 614-617
Goggles . . . . . . . . . . . . . . . . . . . . . 609
Grab Hooks . . . . . . . . . . . . . . . . . . 575
Grade 70 Transport Chain . . . . . 574
Grasshopper™ . . . . . . . . . . . . . . . . 427
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hacksaw Blades . . . . . . . . . . . . . . 353
Hacksaw Frames . . . . . . . . . . . . . . 353
Hackzall® Recip Saw . . . . . . . . . . . 270
Replacement Blades . . . . . . . . . . . . 270
Half Mask Respirators . . . . . . . . 613
Halogen, Quartz bulbs . . . . . . . . 530
Hammer Capsule Epoxy Anchors . . 76
Hammer Drills . . . . . . . . . . . . 317-318
Hammer Iron . . . . . . . . . . . . . . 329-330
Hammer-On Flange Clip . . . . . . . . 157
Hammers, Hand . . . . . . . . . . . . . . . 565
Hammers, rotary . see DeWalt, Milwaukee
Hand Chain Hoist . . . . . . . . . . 576-577
Hand Cleaner . . . . . . . . . . . . . 554-556
Hand Held Core Drill, WEKA . . . . 338
Hand Pump - Hydraulic . . . . . . . 371
hand tools
. . . . . . . 389-392, 442-446, 451-457
Hand Trucks . . . . . . . . . . . . . . . . . 567
Hand Winch (Man Rated) . . . . . . . 606
Hand-Powered Hydraulic
HCCX Tool . . . . . . . . . . . . . . . . . . 398
Handy-Snap . . . . . . . . . . . . . . . . . . 144
Hanger Bolts . . . . . . . . . . . . . 51, 217
HANGERS - PIPE . . . . . . . . . 179-244
Beam Clamps . . . . . .188-189, 196-197
Clevis Hangers . . . . . . . . . . . . . 186-187
Emlok Sprinkler Rings . . . . . . . . . . 221
Flange / Wall Plate . . . . . . . . . . . . . 217
Hold-Rite . . . . . . . . . . . . . . . . . 214-216
Pipe Saddles . . . . . . . . . . . . . . . . . 191
Pipe Shields . . . . . . . . . . . . . . . 186-187
Roller Hangers . . . . . . . . . . . . . 190-191
Split Ring Hanger (Hinged) . . . . . . . 217
Hangermate . . . . . see Sammy / Vertigo
hanger wire . . . . . . . . . . . . . 123-124
Ceiling Wire . . . . . . . . . . . . . . . . . . 124
Clips . . . . . . . . . . . . . . . . . . . . 123-124
J-Master Tool . . . . . . . . . . . . . . . . 123
Preties . . . . . . . . . . . . . . . . . . . . . . 124
Rodman's Tie Wire . . . . . . . . . . . . . 124
U-Hank Wire . . . . . . . . . . . . . . . . . 124
Hartford, CT
800-969-0285
645
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
H
Tools
GREENLEE . . . . . . . . . . . . (continued)
Rope Stands . . . . . . . . . . . . . . . . . 384
Screw Type Reel Stands . . . . . . . . . 385
Set Screw Clamp Pulling Grips . . . . 383
Sheaves . . . . . . . . . . . . . . . . . . . . . 383
Site-Rite® Hand Benders . . . . . . . . 361
Slug-Buster® Hydraulic Driver Kits 370-371
Smart Bender 855 . . . . . . . . . . . . . 362
Standard Knockout Punch Kits . 370-371
Steel Fish Tapes . . . . . . . . . . . . . . . 375
Super Tugger® Cable Puller . . . . . . 380
Test Instruments . . . . . . . . . . . 404-406
Ultra Cable Feeder Model No. 6810 382
Ultra Glider . . . . . . . . . . . . . . . . . . 382
Ultra Tugger® 640/6021 Adapter 380-381
Ultra Tugger™ Speed Booster . . . . 382
Vacuum / Blower Power Fishing System 377
Wire Carts . . . . . . . . . . . . . . . . 386-387
Wire Dispensers . . . . . . . . . . . . 386-387
Wire Reel Support Frame . . . . . . . . 386
Storage Boxes . . . . . . . . . . . . . 532-536
Voltage Testers . . . . . . . . . . . . 404-405
Grinders . . . . . . . . . . . . . see DeWalt &
Grinding Wheels . . . . . . . . . . . 460-462
GRINNELL . . . . . . . . . see Pipe Hangers
Gripple . . . . . . . . . . . 165-166, 232-233
Ground Fault Circuit
Interrupters (GFCI) . . . . . . 527, 591
Grounding connections . . . 503-505
Grounding screws . . . . . . . . . . . . . 51
Abrasives
Fish Plates . . . . . . . . . . . . . . . 178, 217
Fish Poles - Greenlee . . . . . . . . . 376
Fish Tapes / Rods / Line . . . . . . . . 375
Fixed Pipe Saddle Support . . . . . 195
FlameSafe® . . . . . . . . . . see Firestop
Flange Bolts - A307B Heavy Hex . 23
Flange Nuts - Serrated . . . . . . . . 32
Flange Pins . . . . . . . . . . . . . . . . . . 427
Flap Discs . . . . . . . . . . . . . . . 468-469
Flap Wheels . . . . . . . . . . . . . . . 469-470
Flash Protection . . . . . . . . . 620-622
Flashlights . . . . . . . 262-263,289, 529
Flat Boring Bits & Extensions . . 298
Flat Top Clevis Hanger . . . . . . . . 185
Flat Washers
Brass . . . . . . . . . . . . . . . . . . . . . . . 54
Grade 8 Yellow Zinc . . . . . . . . . . . . . 36
Machine Screw . . . . . . . . . . . . . . . . 39
Stainless Steel USS . . . . . . . . . . . . . 39
USS - SAE - Dimensional Info . . . . . 37
USS - SAE - Fender . . . . . . . . . . . . . 36
Flex Splitter® BX & Flexible
Conduit Cutter . . . . . . . . . . . . . 392
Flex-Basket Tray . . . . . . . . . . . . . . 147
Flip Top® Benders No. 882 . . . . . . 364
Floor Fan - Industrial . . . . . . . . 562
Floor Shield . . . . . . . . . . . . . . . . . 539
Floor Squeegee . . . . . . . . . . . . . . 552
Floorboard Torx® Screws . . . . . . . 4
Foam, expanding . . . . . . . . . . . . . . . 81
Foil Tape . . . . . . . . . . . . . . . . . 542, 592
Foot Pump - Hydraulic . . . . . . . . 371
Force Gauge . . . . . . . . . . . . . . . . . 382
Forged
Clevises . . . . . . . . . . . . . . . . . 219, 569
Eye Bolts . . . . . . . . . . . . . . . . . . . . 569
Wire Rope Clips Galvanized . . . . . . 189
Foundation bolt . . . . . . . . . . . . . 176
Four-Wheel Pipe Cutters . . . . . . . 417
Four-Wheel Trolley . . . . . . . . . . . 139
Framer Screws (Blackie) . . . . . . . . . 4
Friction Clamp . . . . . . . . . . . 185, 218
F-Series Vises . . . . . . . . . . . . . . . . . 586
Gray Wolf™ 5012 Hacksaw Frame 353
Green Concrete Wet Blades . . . . 331
Green Ground Screws . . . . . . . . . 51
GREENLEE
Automatic Electrical Tester . . . . 404-405
Battery Powered Crimpers . . . . 397-399
Basket Type Pulling Grip Sets . . . . . 384
Battery Powered Cable Cutter . 395-396
Benders, 555, 881 . . . . . . . . . 361-364
Bending Table . . . . . . . . . . . . . . . . 364
Buried Line Locator . . . . . . . . . 405-406
Bushings for Metal Stud Punches . . 374
Cable Cutter . . . . . . . . . . . . . . 393-396
Cable Feeder . . . . . . . . . . . . . . . . . 382
Cable Pullers . . . . . . . . . . . . . . 378-382
Cable Pulling Lubricant . . . . . . . . . . 385
Cable Tray Cutter . . . . . . . . . . . . . . 396
Chicago Bender . . . . . . . . . . . . . . . 361
Compact Ratchet Cable Cutter . 394-395
Conduit & Pipe Storage Rack . . 386-388
Conduit Measuring Tape . . . . . . . . . 376
Crimpers . . . . . . . . . . . . . . . . . 397-399
Digital Electrical Testers . . . . . . 403-406
Digital Multimeter . . . . . . . . . . 404-405
Double Braided Composite Rope . . 384
Draw Studs . . . . . . . . . . . . . . . . . . 372-373
D'Versabit . . . . . . . . . . . . . . . . . . . . . . . 310
Electric Conduit Bender No. 555® 362-363
Electric Hydraulic Pump . . . . . . . . . 365
EZ Reach™ Fish Stix . . . . . . . . . . . . 376
Fish Line . . . . . . . . . . . . . . . . . . . . 376
Fish Poles . . . . . . . . . . . . . . . . . . . 376
Fish Tapes . . . . . . . . . . . . . . . . . . . 375
Flex Splitter® BX & Flexible
Conduit Cutter . . . . . . . . . . . . . . 392
Flip Top® Benders No. 882 . . . . . . 364
Force Gauge . . . . . . . . . . . . . . . . . 382
Gator™ Battery Tools . . . . . . . 395-399
Hand Caddy - No. 9502 . . . . . . . . . 386
Hand-Powered Hydraulic HCCX Tool . 398
Hickeys with Welded Handles . . . . . 361
Hook Sheaves . . . . . . . . . . . . . . . . 383
Hydraulic Benders . . . . . . . . . . 362-363
Hydraulic Pumps . . . . . . . . . . 365, 371
Hydraulic Hose Units . . . . . . . . . . . 365
Hydraulic Oil . . . . . . . . . . . . . . . . . 366
Hydraulic Punch Kits . . . . . . . . 370-371
Li’L Fisher™ Power Fishing System . . 377
Lube Spreader Swab . . . . . . . . . . . 385
Magnetic Bubble Level . . . . . . . . . . 366
Manual Knockout Punch Kits . . . . . 370
Metal Stud Punches . . . . . . . . . . . . 374
Multiplex Cable Pulling Rope . . . . . 384
Nail Eater II® Power Bits . . . . . . . . 309
No. 881 Cam Track® Conduit Benders 364
Nylon Fish Tapes . . . . . . . . . . . . . . 375
Pipe Cart . . . . . . . . . . . . . . . . . . . . 388
Plumber Stud Punch . . . . . . . . . . . 374
Poly Line . . . . . . . . . . . . . . . . . . . 376
Polyester Measure / Pulling Tapes . 376
Portable Blower Power Fishing System 377
Power Finder Circuit Seeker™ . . . . 405
Pullers . . . . . . . . . . . . . . . . . . . 378-381
Pulling Grip . . . . . . . . . . . . . . . 383-384
Pulling Rope . . . . . . . . . . . . . . . . . 384
PVC Cutter . . . . . . . . . . . . . . . . . . . 392
PVC Heating Blanket . . . . . . . . . . . 366
PVC Plug Set . . . . . . . . . . . . . . . . . 366
Quad Bender™ 853, 854, 855 362-363
Ratchet ACSR / Cable Cutter . . . . . 395
Ratchet Cable Cutter . . . . . . . . 395-396
Ratchet Punch Driver . . . . . . . . . . 370
Ratchet Type Reel Stands . . . . . . . . 385
Reel Stands . . . . . . . . . . . . . . . 385-387
Rope Clevis . . . . . . . . . . . . . . . . . . 383
OnSite
Supply
(continued)
Safety
F
Rentals
index F- H
Fasteners
index H - L
H
(continued)
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Rentals
Hanging Systems . . 165-168, 232-235
Hard Hats . . . . . . . . . . . . . . . . 610-611
Harness, Safety . . . . . . . . . . . 600-602
Haydon Strut . . . . . . . . . . . . See Strut
Head Protection
Hard Hats . . . . . . . . . . . . . . . 610-611
Winter Liners . . . . . . . . . . . . . . 618
Hearing Protection . . . . . . . 607, 610
Heat Blankets . . . . . . . . . . . . . . . . 366
Heat Guns . . . . . . . . . . . . . . . . . . . 360
Heaters . . . . . . . . . . . . . . . . . . . . . . 530
Heavy Duty “Double” Bolt
Pipe Clamps . . . . . . . . . . . . . . . . . 198
Heavy Duty Beam Clamps . . . . . . 197
Heavy Duty Degreaser . . . . . . . . . 554
Heavy Duty Pipe Clamps . . . . . . . . 217
Heavy Duty Pipe Cutters . . . . 417-419
Heavy Duty Ratchet
Cable Cutter . . . . . . . . . . . 393, 395
Heavy Hex Bolts, A307 Grade B . . . 23
Heavy Hex Bolts, A193 B7 . . . . . . . . 24
Heavy Hex Bolts, A193 B8 & B8M . . 25
Hex Nuts . . . . . . . . . . . . . . . . . see Nuts
Heavy Hex Nut Dimensions . . . . . . 31
Heavy Hex Nuts . . . . . . . . . . . . 31, 174
Heavy Nuts, 2H, DH, DH3 . . . . . . 21, 31
Heavy Welded Steel Bracket . . . . 207
Heli-Coil Screw Thread Inserts . . 56
Helicopter Deck Insert . . . . . . . . 199
Hex Bolts . . . . . . . . . . . . . . . . . . . 22-29
Hex Cap Screws
Brass . . . . . . . . . . . . . . . . . . . . . . . 53
Grades 2, 5 & 8 . . . . . . . . . . . . 22, 27
Stainless Steel . . . . . . . . . . . . . . . 28-29
Hex Coupling Nut Sleeve Anchors 84
Hex Keys . . . . . . . . . . . . . . . . . . . . . . 58
Hex Nut Specifications . . . . . . . . . 30
Hex Shank Bits & Hammer
Accessories . . . . . . . . . . . . . 329-330
Hex Tap Bolts - Fully Threaded . . 26
Hi Collar Lock Washers . . . . . . . . 38
Hi Jacks . . . . . . . . . . . . . . . . . . . . . 426
Hickeys with Welded Handles . . 361
High Access Ratcheting
Wrench Set . . . . . . . . . . . . . . . . 454
High hex tek screws . . . . . . . . . . . . 3
High Pressure Hydraulic Hand
Pump . . . . . . . . . . . . . . . . . . . . . . 371
High Speed Cut-Off Wheels for
Portable Saws . . . . . . . . . . . . . . 465
High Speed Steel
(HSS) Annular Cutters . . . . . . . . . . 334
Fractional Drill Bits . . . . . . . . . 299-300
Letter Size Drill Bits . . . . . . . . . . . . 299
Number Size Drill Bits . . . . . . . . . . 299
Reduced Shank Drill Bits . . . . . . . . 300
Stub Length Drill Bits . . . . . . . . . . . 300
Taps . . . . . . . . . . . . . . . . . . . . 300-301
Twist Drill Bits . . . . . . . . . . . . . 297-300
High Voltage
Glove Kits . . . . . . . . . . . . . . . . . . . 621
Protection . . . . . . . . . . . . . . . . 620-622
Tools . . . . . . . . . . . . . . . . . . . . . . . 622
High-Hex . . . . . . . . . . . . . . . . . . . . . . . 3
HILTI ® . . . . . . . . . . . . . . . . . (see Powers)
Hinged Cutters . . . . . . . . . . . . . . . 417
Hinged Split Ring Hangers . . . . . 217
Hoists . . . . . . . . . . . . . . . . . . . . 576-578
HOLDRITE® . . . . . . . . . . . . 144, 214-216
EZ Strut System (Silencer) . . . . . . . 144
"Mickey Mouse Ear" Clamps . . . . . . 215
Stout Brackets & Clamps . . . . . 214-216
hole covers, hole-in-one . 335, 540
646
Hole Cutters . . . . . . . . . . 301-302, 312
Hole cutters, Pipe . . . . . . . . . . . . 422
Hole Master™ Hole Cutting Base 422
hole-out (plastic pipe sleeves) . . 209
Hole Plugs . . . . . . . . . . . . . . . . . 75, 79
Hole Saw Arbors . . . . . . . . . . 305-307
Hole Saws / Kits . . . . . . . . . . . . . . 304
Hole-Hawg® Drill . . . . . . . . . . . . . 296
Hole-Shooters, “D” Handle . . . . 296
Hollow Set Drop-In . . . . 90, 105, 220
Hollow Wall
Adhesives Accessories . . . . . . . . . 74-81
Anchors . . . . . . . . . . 106-110, 220-221
Wall Dogs . . . . . . . . . . . . . . . . . . . 107
Zip-Its . . . . . . . . . . . . . . . . . . . . . . 108
Hook Bolts . . . . . . . . . . . . . . . . . . 176
Hook Sheaves . . . . . . . . . . . . . . . . 383
Hook to Eye Turnbuckles . . . . . . 568
Hook to Hook Turnbuckles . . . . 568
Hose Units - Hydraulic . . . . . . . . 365
Hose
Accessories . . . . . . . . . . . . . . . 560-561
Discharge . . . . . . . . . . . . . . . . . . . 560
Mill . . . . . . . . . . . . . . . . . . . . . . . . 560
Nozzles . . . . . . . . . . . . . . . . . . . . . 560
Pressure Washer . . . . . . . . . . . . . . 560
PVC . . . . . . . . . . . . . . . . . . . . . . . . 560
Quick Lock Adapter . . . . . . . . . . . . 560
Rubber . . . . . . . . . . . . . . . . . . . . . 560
Strainers . . . . . . . . . . . . . . . . . . . . 560
Suction . . . . . . . . . . . . . . . . . . . . . 560
Washers . . . . . . . . . . . . . . . . . . . . 560
Water . . . . . . . . . . . . . . . . . . . 560-561
Hot Box . . . . . . . . . . . . . . . . . . . . . 366
Hot Dip Galvanized Nuts . . . . . . . . 30
Hot Tapping Tool . . . . . . . . . . . . . 423
HOUGEN®
“12,000-Series” Cutters . . . . . . . . . 334
Portable Drills . . . . . . . . . . . . . 332-333
HUSKY™ Contractor Trash Bags
. . . . . . . . . . . . . . . . . . . . . 549, 592
HVAC Duct Cover Film . . . . . . . . . 539
Hybrid Gas/Powder Fasteners . . 122
Hydraulic
Benders . . . . . . . . . . . . . . . . . . 363-364
Foot Pump No. 1725 . . . . . . . . . . . 371
Hand Pump No. 767 . . . . . . . . . . . 371
Hose Units . . . . . . . . . . . . . . . . . . . 365
Oil . . . . . . . . . . . . . . . . . . . . . . . . . 366
Punch Kits . . . . . . . . . . . . . . . . 368-371
Roll Groover - Model 918 . . . . . . . 416
HYDRAZORB™ . . . . . . . . . . . . . . . . . 141
Cush-A-Clamp® - Hydrazorb /
Supertrut SNAP Guard® . . . . . . . . . 141
Hydroflame Firestop Inserts
. . . . . . . . . . . . . . . . . . . . . . . . . 495
Hydraulic Cement . . . . . . . . . . . . . 566
I
I-Beam Clamp . . . . . . . . . . 138, 196-197
ICe tong beam clamp . . . . . . . . . . 196
IGLOO® Water Coolers . . . . . . . . . 561
Impact Guns / Wrenches . . . . . . . 316
Impact Sockets . . . . . . . . . . . . . . . 452
Incandescent Light Bulb . . . . . . 530
Innerlynx® / Link Seals
. . . . . . . . . . . . . . 210-211, 522-523
In-Place Soil Pipe Cutter . . . . . . 419
Insert Bits / Holders . . . . . . . . . . 315
Internal / External Tooth
Lock Washers . . . . . . . . . . . . . . . 38
Internal Tube Brushes . . . . . . . . 488
Intumescent Firestop . . . . . . 490-502
IPC Firestop (GRACE) . . . . . . 500-502
ISSB Strut Plate . . . . . . . . . . . . . . 165
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
J
ISN Smart Nut . . . . . . . . . . . . . . . . 165
Isolators . . . . . . . . . . . . see Vibration
ITW-Ramset® - Powder
. . . . . . . . . . . . . . 111-113, 119-124
ITW-Red Head® . . . . 71, 83, 85, 89, 92
ITW-BUILDEX
Dektite™ Pipe Flashings . . . . . . . . . 244
E-Z-Anchor, (see Zip-It) . . . . . . . . . 108
Jack Hammers . . . . . . . . . . . . . . . . 328
Jack Stands . . . . . . . . . . . . . . . 425-426
Jam Nut Dimensions . . . . . . . . . . . 32
Jaw to Jaw Turnbuckles . . . . . . . 568
J-Bolt . . . . . . . . . . . . . . . . . . . . . . . 176
J-Hanger - Side Lock . . . . . . . . . . 218
J-Hook - “Return” Line . . . . . . . . 218
J-Hook Straight . . . . . . . . . . . . . . 218
Jiffy Clips - Standard . . . . . . . . . 145
Jig Saws . . . . . . . . . . . . . . . . . . . . . 345
Jig Saw Blades . . . . . . . . . . . . . . . 345
Bosch Style Specifications . . . . . . . 345
Universal Style Specifications . . . . . 345
Job Site Radio . . . . . . . . . . . . 274, 289
Jobbers Length Twist
Drill Bits Sets . . . . . . . . . . . 297-298
Jobox Storage Chests . . . . . . . . 535
Junior Channel . . . . . . . . . . . . . . 133
Junior Top Beam Clamps . . . 188, 221
K
KARP Access Doors . . . . . . see Acudor
Kep Lock Nuts . . . . . . . . . . . . . . . . . 32
Kerosene cans . . . . . . . . . . . 563, 595
KIDDE Fire Extinguishers . . . . . . 627
Kindorf, (see also Strut) . . . . . 125-141
KLEIN TOOLS®
Bolt Bags . . . . . . . . . . . . . . . . . . . . 457
Bull-Pins . . . . . . . . . . . . . . . . . . . . 457
Canvas Tool Bags . . . . . . . . . . . . . . 457
Diagonal-Cutting Pliers . . . . . . 390-391
Leather-Bottom Bucket . . . . . . . . . 457
Side Cutting Pliers . . . . . . . . . . 390-391
Tool Belts . . . . . . . . . . . . . . . . . . . 457
Klo-Shure Insulation
Coupling System . . . . . . . . 142, 212
KNAACk . . . . see JOBOX or GREENLEE
Knives . . . . . . . . . . . . . . . . . . . 351, 444
Knock Outs / Punches . . . . . . 368-371
Draw Studs . . . . . . . . . . . . . . . 372-373
Knock-Out (KO) Strut . . . . . . . . . . 132
Knock-Out Raceway . . . . . . . . . . . 133
Knockout Fluorescent
Raceway System . . . . . . . . . . . . . 133
Knot Wire Cup Brushes . . . . . 485-486
Knot Wire Wheel Brushes . . 483, 485
Kraft Paper - Water Shield
Reinforced . . . . . . . . . . . . . . . . 539
Krylon (Paints) . . . . . . . . . . . 543-544
Kwik-Bolts . . . . . . . see Wedge Anchors
Kwic-Loc Hanging Systems . 167, 234
L
LADd - pins & clips . . . . . . . . . . . . 124
Ladders . . . . . . . . . . . . . . . . . . 524-526
Lag Screws . . . . . . . . . . . . . . . . . . . 26
Lag Shield . . . . . . . . . . . . . . . . . . . 104
Laminating Screw . . . . . . . . . . . . . . . 5
Lanyards . . . . . . . . . . . . . . . . . 600-605
Self-Retracting . . . . . . . . . . . . . . . . 605
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
647
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
3M Respirators . . . . . . . . . . . . 613-614
m12 Drill Driver . . . . . . . . . . . . . . . 50
M-4 Drill Rig Hand Held Core
Motor . . . . . . . . . . . . . . . . . . . . . 338
M-Lok Sprinkler Ring . . . . . . . . . . 221
Machine Screws . . . . . . . . see Screws
Machinery Eye Bolts / Lifting Eyes 570
Mag Drill Cutters . . . . . . . . . . . . 334
Mag Drill Presses . . . . . . . . . 332-333
MAG-LITE® Flashlights . . . . . . . . . 529
Magnetic Bit Holders . . . . . . . . . 315
Magnetic Bubble Level . . . . . . . . 366
Magnum®
Hammer-Drills . . . . . . . . see Milwaukee
Hole-Shooters . . . . . . . . see Milwaukee
Right Angle Drill Kit . . . . . see Milwaukee
Malleable C-Clamp . . . . . . . . . . . . 188
Malleable Extension Piece . . . . . 219
Managed Inventory System . . . . . 57
Manhole ladders . . . . . . . . . . . . . 525
Manila rope . . . . . . . . . . . . . 573, 593
Manuclave . . . . . . . . . . . . . . . . . . . 604
MARKAL® Markers . . . . . . . . . . 542-543
Marking paint . . . . . . . . . . . . . 543-544
Marking Wand . . . . . . . . . . . . . . . . 544
Masking Tape . . . . . . . . . . . . . . . . . 542
MASON INDUSTRIES
Mounts & Pads Waffles . . . . . 207, 230
Spring Mounts . . . . . . . . . . . . 207, 230
Vibration Isolation Hangers . . 207, 230
MASTERLOCK
Laminated Steel Padlocks . . . 537, 594
Safety Lockouts . . . . . . . . . . . . . . . 623
Material Handling . . . . . 546-548, 567
Material Lifts . . . . . 428-429, 546-547
Matting . . . . . . . . . . . . . . . . . . . . . 567
Mechanical Anchor Selection Guide
. . . . . . . . . . . . . . . . . . . . . . 66-67
Mechanical Benders . . . . . . . . . . 361
mechanic's gloves . . . . . . . . . . . . 615
Mechanics’ Vises . . . . . . . . . . . . . . 586
medical support grids, strut . Preface B
Medium Welded Steel Bracket . . 207
Metal
Cutting Saws . . . . . . . . . . . . . 355-356
Halide Lights . . . . . . . . . . . . . . . . . 528
Saw Blades . . . . . . . . . . . . . . . . . . 357
Paint Tray . . . . . . . . . . . . . . . . . . . 545
Stud Punches . . . . . . . . . . . . . . . . . 374
Metal Devil Metal Cutting Saws . 356
Metric Fasteners & Specifications . . 60-61
Mice . . . . . . . . . . . . . . . . . . . . . . . . . 378
Tools
M
MICHIGAN Hangers . . . . see Hangers
J-Hook Straight . . . . . . . . . . . . . . 218
"Mickey Mouse Ear" Clamps . . . . . . 215
One Hole Pipe Strap . . . . . . . . . . . 218
Plain/Welded Eye Rods . . . . . . . . . . 219
Return Line Angles . . . . . . . . . . . . . 217
Rod Couplings . . . . . . . . . . . . . . . . 219
Two Hole Pipe Strap . . . . . . . . . . . 218
Wire Pipe Hook . . . . . . . . . . . . . . . 218
Micro Drills 15-Piece Sets . . . . . 297
"Mickey Mouse Ear" Clamps . . . . . 215
Midget Tubing Cutters . . . . . . . . 420
Mill Hose . . . . . . . . . . . . . . . . . . . . 560
MILWAUKEE
10-1/4” Circular Saws . . . . . . . . . . 355
14” Abrasive Cut-Off Machine . . . . 359
14” Dry-Cut Machine . . . . . . . . . . . 358
15 Amp Grinders / Sanders . . . 343-344
4-1/2" Magnum® Sander/Grinder . . . 340-343
7-1/4" Circular Saws . . . . . . . . . . . 354
7-1/4” Worm Drive Saw . . . . . . . . . 355
8” Metal Cutting Saw . . . . . . . . . . . 355
Band Saws . . . . . . . . . . . . . . . . . . . 352
Band Saw Blades . . . . . . . . . . . . . . 353
Batteries . . . . . . . . . . . . . . . . . . . . 291
Carbide Bits
SDS . . . . . . . . . . . . . . . . . . . 322-323
SDS Max . . . . . . . . . . . . . . . . . . 326
Spline . . . . . . . . . . . . . . . . . . . . 326
Straight . . . . . . . . . . . . . . . . . . . 317
Chargers . . . . . . . . . . . . . . . . . . . . 291
Chipping & Demolition Hammer . . . . 328
Circular Saws . . . . . . . . . . . . . . . . 354-355
Close Quarter Drills . . . . . . . . . . . . . . . 297
Copper Tubing Cutter, M12 . . . . . . . . . . 269
Core Bits . . . . . . . . . . . . . . . . . . . . . . . 327
Corded Tools . . . . . . . . . . . . . . . . 292-360
Circular Saws . . . . . . . . . . . . . . 354-355
Close Quarter Drills . . . . . . . . . . . . . 297
Drills . . . . . . . . . . . . . . . . . . . . . 292-294
D-Handle Drills . . . . . . . . . . . . . . . . . 295
Hammer Drills . . . . . . . . . . . . . . . 318-320
Heat Guns . . . . . . . . . . . . . . . . . . . . 360
Hole-Hawgs . . . . . . . . . . . . . . . . . . . 296
Pistol Drills . . . . . . . . . . . . . . . . 292-294
Right Angle Drills . . . . . . . . . . . . . . . 297
Rotary Hammers . . . . . . . . . 324-325
Screw Guns . . . . . . . . . . . . . . . . 313
TEK Drivers . . . . . . . . . . . . . . . . 313
Cordless Tools . . . . . . . . . . . . . . . 249-274
12V Li-Ion, M12 . . . . . . . . . . . . 268-274
18V Li-Ion, M18 . . . . . . . . . . . . 256-263
28V Li-ion, V28 . . . . . . . . . . . . . 249-252
Li-Ion . . . . 249-252, 256-263, 268-274
Radios/Light . . . . . . . . . . . 262-263, 289
V28 . . . . . . . . . . . . . . . . . . . . . 249-252
D-Handle Drills . . . . . . . . . . . . . . . . . . . 295
Demolition Hammer Accessories . . . . 329
Demolition Hammers . . . . . . . . . . . 328
Diamond Coring Motors
15 Amp Models . . . . . . . . . . . . . 336
20 Amp Models . . . . . . . . . . . . . 336
Large Base Assembly . . . . . . . . . 337
Meter Boxes . . . . . . . . . . . . . . . 337
Small Base Assembly . . . . . . . . . 337
Vacuum Pump Assembly . . . . . . . 337
Water Collecting Gasket . . . . . . . 337
Water Collecting Ring . . . . . . . . . 337
Water Hose . . . . . . . . . . . . . . . . 337
Water Tank . . . . . . . . . . . . . . . . 337
Diamond Drilling Rigs . . . . . . . . . . . 336
Die Grinder . . . . . . . . . . . . . . . . . . 339
Drills, corded . . . . . . . . . . . . . . . . 292-294
Close Quarter Drills . . . . . . . . . . . . . 291
D-Handle Drills . . . . . . . . . . . . . . . . . 295
Hammer Drills . . . . . . . . . . . . . . . 318-320
Hole-Hawgs . . . . . . . . . . . . . . . . . . . 296
Pistol Drills . . . . . . . . . . . . . . . . 292-294
Abrasives
Large Diameter Screw Anchors . 88-89
Laser layout tools . . . . 272, 446-449
Laser Temp-Gun, M12 . . . . . . . . . . 272
LDT ANCHORS . . . . . . . . . . . . . . . . 88-89
Lead Scru™ Anchors . . . . . . . . . . 105
Leak-Stopper . . . . . . . . . . . . . . . . . 566
Leather Gloves . . . . . . . . . . . . 614-617
LENOX
Bandsaw blades . . . . . . . . 353, 596-597
Bi-Metal Hole Saws . . . . . . . . . 307-308
Carbide Tipped Hole Saws . . . . . . . 308
Gray Wolf™ Hacksaw Frame . . . . . . 351
Hackmaster® Hacksaw Frame . . . . . 351
Hacksaw Blades . . . . . . . . . . . . . . . 351
Hole Cutters . . . . . . . . . . . . . . . . . 301
Hole Saw Arbors . . . . . . . . . . . . . . 307
Hole Saw Kits - Bi-Metal . . . . . . . . 304
Big Daddy 2000G . . . . . . . . . . . 304
Electrician No. 30802-1200L . . . 304
Electrician No. 30821-602L . . . . 304
Plumber No. 30808-602P . . . . . 304
Jig Saw Blades . . . . . . . . . . . . . . . 345
Lubricants . . . . . . . . . . . . . . . . . . . 598
Portabands® Master-Band . . . . . . . 353
PVC/ABS Plastic Pipe Hand Saw . . . 351
Reciprocating Blade Kits . . . . . . . . 347
Reciprocating Blades . . . . . . . . . . . 350
Sawing fluids . . . . . . . . . . . . . . . . . 598
Tri-Fold® Saw . . . . . . . . . . . . . . . . . 351
Utility Knives . . . . . . . . . . . . . 351, 444
Vari-Bit® Step Drill Bits . . . . . . . . . . 303
Wolf-Band® Portable Band Saw Blade 353
Lens Cleaning towellettes . . . . 609
Level - FatMax® . . . . . . . . . . . . . . . 445
Level Head Rake . . . . . . . . . . . . . . 565
Lever-type chain hoists . . . . . . . . 576
Li-Ion Cordless Tools . . . . . . 246-276
Lifelines, Safety . . . . . . . . . . . 605-606
Lifts . . . . . . . . . . . . . 428-429, 546-547
Lifting eyes . . . . . . . . . . . . . . . . . . 570
Light Bulbs . . . . . . . . . . . . . . . . . . 530
Light Duty
Beam Clamp . . . . . . . . . . . . . . . . . 138
Clevis Hangers . . . . . . . . . . . . . . . . 187
Light stands . . . . . . . . . . . . . . . . . 528
Light Strings . . . . . . . . . . . . . . . . . 528
lighting, temporary . . . . . . . . . . . . . . 528
Lightweight Welded Steel Bracket
. . . . . . . . . . . . . . . . . . . . . . . . . 207
Li’L Fisher™ Power Fishing System 377
Line Locators . . . . . . . . . . . . . . . . 437
Liners, Hard Hat . . . . . . . . . . . . . . 618
Link Seals / Innerlynx® . 210-211, 522
Little Kicker® Offset Bender . . . 361
Lo Jacks . . . . . . . . . . . . . . . . . . . . . 426
Load Binders . . . . . . . . . . . . . 575, 580
loads, powdereD . . . . . . . . . . . . . 120
Locators, Utility . . . . . . . . . . 437-438
Lock Nuts . . . . . . . . . . . . . . see Nuts
18-8 Stainless Steel Nylon Insert . . 34
All Metal Top - Grade C . . . . . . . . . 33
Kep . . . . . . . . . . . . . . . . . . . . . . . . 32
Nylon Insert . . . . . . . . . . . . . . . . . . . 32
Reversible . . . . . . . . . . . . . . . . . . . 32
Locks, padlocks . . . . . . 537, 594, 623
Locking
C-Clamp . . . . . . . . . . . . . . . . . . . . 456
Chain Clamp . . . . . . . . . . . . . . . . . 456
Curved Jaws/Wire Cutter Pliers . . . 456
Straight Jaws Pliers . . . . . . . . . . . . 456
Welding Clamp . . . . . . . . . . . . . . . . 456
Lockout Tags . . . . . . . . . . . . . . . . 624
Lockouts . . . . . . . . . . . . . . . . . . . . 623
Lockrite - Holdrite . . . . . . . . 214-215
Lok-Bolt Sleeve Anchors . . . . . . . 84
Long Nose w/ Wire Cutter, Pliers 391
LOUISVILLE LADDER
Fiberglass Extension Ladder . . . . . . 525
Fiberglass Step Ladder . . . . . . . . . . 524
Scaffolds . . . . . . . . . . . . . . . . . . . 526
LT-101 Flange . . . . . . . . . . . . . . . . . 143
LT-109 StrutCatcher . . . . . . . . . . . 143
Lube Spreader Swab . . . . . . . . . . . 385
Lubricants . . . . . . . . . . . . . . . . . . . 555
Pulling . . . . . . . . . . . . . . . . . . . . . . 385
Sawing . . . . . . . . . . . . . . . . . . . . . 598
LugAll Portable Cable Winch
Hoists . . . . . . . . . . . . . . . . . . . . . 580
Lumber crayons . . . . . . . . . . . . . . 542
Lump hammers . . . . . . . . . . . . . . . 565
OnSite
Supply
(continued)
Safety
L
Rentals
index l
Fasteners
index M - P
M
(continued)
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
MILWAUKEE . . . . . . . . . . . (continued)
Right Angle Drills . . . . . . . . . . . . . . . . . 297
Dry Cut Metal Blades . . . . . . . . . . . 357
Flat Boring Bits & Extensions . . . . . 298
Hammer Drills . . . . . . . . . . . . . . . . . 318-320
Hackzall™ Reciprocating Saw, M12 . . . . . 270
Heat Gun . . . . . . . . . . . . . . . . . . . . . . . . . 360
Hex Shank Bits, & Hammer Accessories 317
Hole Saws . . . . . . . . . . . . . . . . 304-306
Hole-Hawg® Drill . . . . . . . . . . . . . . 296
Impact Wrenches . . . . . . . 258-259, 316
Inspection Camera . . . . . . . . . . . . . . . . . 271
Job Site Radio . . . . . . . . 263, 274, 289
Jobbers Length Twist Drill Bits Sets 297
Laser, Plumb Tool, M12 . . . . . . . . . 272
Laser Temperature Gun ,M12 . . . . . 272
Multi-Bay Charger . . . . . . . . . . . . . 252
Nibblers . . . . . . . . . . . . . . . . . . . . 360
No-Hub Driver, M!2 . . . . . . . . . . . . . . . . 269
Pistol Drills . . . . . . . . . . . . . . . . . . 292-294
Portable Electric Band Saws . . . . . . 352
PVC Shears, M12 . . . . . . . . . . . . . . . . . . 270
Quick Change Arbor System . . . . . . 302
Rebar Locator . . . . . . . . . . . . . . . . 271
Right Angle Drills . . . . . . . . . . . . 270, 297
Rotary Hammers . . . . . . . . . . . 324-325
Sawzall® . . . . . . . . . . . . . . . . . 346-347
Sawzall® Blades . . . . . . . . . . . . 348-349
Screw Guns/Tek Drivers . . . . . . . . . 313
SDS Rotary Hammers . . . . . . . 318-320
SDS Carbide Tipped Bits . . . . . 321-323
Selfeed Bits & Quick Change
Auger Bits . . . . . . . . . . . . . . . . . 309
Sheet Metal Carbide Tooth Hole Saws
. . . . . . . . . . . . . . . . . . . . . . . . . 302
Super-Hawg® Drill . . . . . . . . . . . . . 296
Stud Finder, M12 . . . . . . . . . . . . . . 271
Sub-Scanner, M12 . . . . . . . . . . . . . 271
Swivel Head Shear . . . . . . . . . . . . . 360
TEK Drivers . . . . . . . . . . . . . . . . . . 313
Test & MEasurement Tools, M12 . . 271-273
Tubing Cutter, M12 . . . . . . . . . . . . . . . . . 269
Mineral wool . . . . . . . . . . . . . . . . 501
Minerallac® Malleable
Beam Clamp -CD Series . . . . . 145
Mini Drop In Anchors . . . . . . 92, 224
Mini's Caddy CD Series . . . . . . . . . 161
Mini Strut . . . . . . . . . . . . . . . . . . . 133
MK Morse
Bi-Metal Hole Saws / Arbors . . . . . 305
Circular Saw Blades, Metal Cutting . . 357
Metal Devil Metal Cutting Saws . . . . 356
Miro . . . . . . . . . . . . . . . . . . . . . . . . 241
Miscellaneous Brushes
. . . . . . . . . . . . . . 487, 545, 552-553
Mixing pan . . . . . . . . . . . . . . . . . . . 566
Mobile work bench . . . . . . . . 533-535
Molded Beam Clamps - Fiberglass 151
Molded Clevis Hangers - Fiberglass 151
Molded Rubber Straps . . . . . . . . 538
MonoSystems . . . . . . . . . . . . . . . 148
Mops . . . . . . . . . . . . . . . . . . . . . . . . 550
Mop buckets . . . . . . . . . . . . . . . . . 550
Mop Handles . . . . . . . . . . . . . . . . . 550
Mops / Combo Packs . . . . . . . . . . 550
MORSE . . . . . . . . . . . . . . see MK Morse
Mortar mixing pan . . . . . . . . . . . . 566
MOTOROLA Two-Way Radios . 583-584
Mounting Bracket for any
Electrical Box . . . . . . . . . . . 158-159
Moustache Clip (KX) . . . . . . . . . . . 160
MP HUSKY . . . . . . . . . . . . . . . . . . . . 148
Rentals
648
o
MRO Pillow . . . . . . . . . . . . . . . . . . 558
Multi-Bay Charger . . . . . . . . . . . . 252
Multiplex Cable Pulling Rope . . 384
Multi-Set II Drop-In Anchors . . . . 92
N
N95 Respirators . . . . . . . . . . . 612-613
Nail Eater II® Power Bits . . . . . . . 309
Nail Plates . . . . . . . . . . . . . . . . . . . 213
Nailing sleeve . . . . . . . . . . . . . . . . 209
Nailins . . . . . . . . . . . . . . . . . . . 51, 103
Natick Hanger (Copper) . . . . . . . . 219
Neoprene Bonded Sealing Teks . . . 7
Nibblers / Shears . . . . . . . . . . . . . 360
Niedax basket tray . . . . . . . . . . . 148
"No-HUB" Driver, M12 . . . . . . . . . . 269
No Spring Regular Channel Nuts 135
No Spring Shallow Channel Nuts 135
No Twist Washer . . . . . . . . . . . . . 136
Non-Metallic Cable Rack
. . . . . . . . . . . . . . . . 126, 146-149, 152
Non-Shrink Grout . . . . . . . . . . . . 566
Non-Standard U-Bolts . . . . . . . . 176
Non-Woven Rolls - Sand-Light™ 471
Nozzles, hose . . . . . . . . . . . . . . . . 561
Nut Drivers / Setters . . . . . . . 10, 315
Nuts . . . . . . . . . . see also Hex Nuts
Acorn Cap - Brass . . . . . . . . . . . . . . 55
Coil . . . . . . . . . . . . . . . . . . . . . 33, 171
Hex Finished, Brass . . . . . . . . . . . . . 53
GR2 - plain & plated . . . . . . . . . . . . 30
GR5 - plain & plated . . . . . . . . . . 30
GR8 - plated . . . . . . . . . . . . . . . . . . 30
Hot dipped galvanized . . . . . . . . . 30
Stainless Steel . . . . . . . . . . . . . . . 34
Hex Heavy
2H ASTM A194 . . . . . . . . . . . . . . 31
Brass . . . . . . . . . . . . . . . . . . . . . . 53
Dimensions . . . . . . . . . . . . . . . . . 31
GR8 ASTM A194 Stainless Steel . . 31
GR8M ASTM A194 Stainless Steel 31
Plain & Plated . . . . . . . . . . . . . . . 31
Stainless Steel . . . . . . . . . . . . . . . 34
Hex Jam . . . . . . . . . . . . . . . . . . . . . 32
Kep . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lock . . . . . . . . . . . . . . . . . . . . 32, 173
Machine Screw
Brass . . . . . . . . . . . . . . . . . . . . . . 55
Stainless steel . . . . . . . . . . . . . . . 34
Metric . . . . . . . . . . . . . . . . . . . . . . . 61
Nylon Insert Lock . . . . . . . . . . . . . . . 32
Stainless Steel . . . . . . . . . . . . . . . 34
Reducing Rod Coupling . . . . . . 33, 174
Reversible Lock . . . . . . . . . . . . . . . . 32
Rod Coupling . . . . . . . . . . . . . . 33, 174
Serrated flange lock . . . . . . . . . . . . . 32
Slip-on locknuts . . . . . . . . . . . . 31, 173
Slotted . . . . . . . . . . . . . . . . . . . . . . 33
Square . . . . . . . . . . . . . . . . . . . . . . 33
Structural ASTM A565 DH, DH3, 2H . . . 31
Tee . . . . . . . . . . . . . . . . . . . . . . . . . 33
Top lock GR-C . . . . . . . . . . . . . . . . . 33
Wing . . . . . . . . . . . . . . . . . . . . . . . . 33
Brass . . . . . . . . . . . . . . . . . . . . . . 53
Stainless Steel . . . . . . . . . . . . . . . 34
Nylon / Wire Brushes . . . . . . . . . 485
Nylon
Abrasive Brushes . . . . . . . . . . . . . . 485
Insert Lock Nuts . . . . . . . . . . . . . . . 32
Nail-in Anchors . . . . . . . . . . . . . . . 103
Nailin ™ . . . . . . . . . . . . . . . . . . . . . . 103
Screens . . . . . . . . . . . . . . . . . . . . . . 76
Slings . . . . . . . . . . . . . . . . . . . 581-582
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
O.D. Tubing PS 1200 / 701 . . . . . . . 140
Offset Eye Bolts (Pig Tail) . . . . . . 243
Offset Pipe Clamps . . . . . . . . . . . . 198
Offset Striking Wrenches . . . . . 454
OIL•DRI
Absorbents . . . . . . . . . . . . . . . . . . 558
Booms 810 & 410S . . . . . . . . . . . . 558
Drum Top Pads . . . . . . . . . . . . . . . 558
MRO Pillow . . . . . . . . . . . . . . . . . . 558
Polypropylene Roll . . . . . . . . . . . . . 558
Oiler, Ridgid . . . . . . . . . . . . . . . . . 413
One Hole pipe straps & Clamps . . 218
One Piece Pipe Strap . . . . . . 139, 145
One Piece Strut Clamp
SCH Series . . . . . . . . . . . . . . . . . . 161
ON-SITE SUPPLIES . . . . . . . . . 490-598
Open 4-Hole Angle . . . . . . . . . . . . 136
Ovation™ Flap Discs . . . . . . . . . . . 469
Overall Industrial Aerosol Paint
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
overhead fastening . . . . . . . . 123-124
Overshoe / Slush Boot . . . . . . . . 607
Oversized Dowel Pins . . . . . . . . . . 58
P
P100 Respiratory Protection . . . 612
Packaging Tape . . . . . . . . . . . . . . . 542
Paddle Bit . . . . . . . . . . . . . . . . . . . 298
paddle signs . . . . . . . . . . . . . . . . . 628
Padlocks . . . . . . . . . . . . 537, 594, 623
pads, e-z cut
(vibration isolator) . . . . . . . . . 230
Pail Buckets - Round & Double 550
Paint & Aerosol Chemicals . 543-544
Paint Brushes . . . . . . . . . . . . . . . . 545
Paint Markers . . . . . . . . . . . . . . . . 543
PAint Trays . . . . . . . . . . . . . . . . . . . 545
Pancake Framer Screws . . . . . . . . . 4
Paper Towels . . . . . . . . . . . . . . . . 556
Parallel Pipe Clamp . . . . . . . . . . . 139
Particle Board Screws . . . . . . . . . . 9
Pavement Breakers . . . . . . . . . . . 328
Peanut Screws . . . . . . . . . . . . . . . . . 4
Pear Head Ratchets . . . . . . . . . . . 452
Peerless (ACCO®)
Lifting Chain & Accessories . . . . . 475-480
Pencils, carpenter . . . . . . . . . . . . 542
Pencil Point San Angelo Bar . . . 565
Pencil Vibrator . . . . . . . . . . . . . . . 282
Penetrating Oil . . . . . . . . . . . . . . . 555
Pennant Flags . . . . . . . . . . . . . . . 594
Perimeter cable . . . . . . . . . . . 571-572
Perimeter Fencing . . . . . . . . 567, 594
Perimeter Flagging . . . . . . . . . . . 594
Pferd/Advance Brush
Counter Dusters . . . . . . . . . . . . . . . 484
Cup Brushes . . . . . . . . . . . . . . . . . 486
Internal Tube Brushes . . . . . . . . . . 488
Polifan™ Curve Flap Disc . . . . . . . . . 469
Scratch Brushes . . . . . . . . . . . . . . . 484
Wire Brushes . . . . . . . . . . . . . . . . . 484
Wire Cup Brushes . . . . . . . . . . . . . 486
Wire End Brushes . . . . . . . . . . 486-487
Wire Wheels . . . . . . . . . . . . . . . . . 483
Phillips Insert Bits . . . . . . . . . . . . 315
Phillips Power Bits . . . . . . . . . . . 315
Pillows, Firestop . . . . . . . . . 493, 502
Pins . . . . . . . . . . . . . . . . . . . . . . . . . . 58
pins and clips . . . . . . . . . . . . . 112-124
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Q
Q Deck Sleeve . . . . . . . . . . . . . . . . 209
Quad Bender™ 853, 854, 855 . . . . 362
Quartz & Metal Halide Light Bulbs . 530
quick-Bolts . . . . . . see Wedge Anchors
Quick Change Arbor System . . . . 309
Quick Change Auger Bits . . . . . . 309
Quick Draw . . . . . . . . . . . . . . . . . . 370
Quick Links . . . . . . . . . . . . . . . . . . 575
Quick-Lock Adapters, hose . . . . . 560
Quick Square® Layout Tool . . . . 445
Quick-Acting Tubing Cutter . . . . 420
Hartford, CT
800-969-0285
649
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
POWERS FASTENERS . . . . (continued)
Wedge-Bolt Anchors . . . . . . . . . 72, 88
410 Stainless Steel . . . . . . . . . . . 88
Carbon Steel Wedge-Bolt® BT . 72, 88
Carbon Steel Wedge-Bolt® OT . . . . 88
Carbon Steel Wedge-Bolt™ . . . 72, 88
Wood-Knocker™ . . . . . . . . . . . . . . . . 87
Wood Side Hanger . . . . . . . . . . . . . . 98
Wood Vertical Hanger . . . . . . . . . . . 98
Zamac Hammer-Screw® . . . . . . 103-104
Zamac Nailin™ . . . . . . . . . . . . . 103-104
Zip-It Wall Anchors . . . . . . . . . . . . 108
Power Pipe Cutter . . . . . . . . . . . . 418
Power Point™ Pins . . . . . . . . . 121-122
Power Threading Machine . . 408-411
Powerfoam™ / Triggerfoam™ . . . . 81
POWER-STRUT® . . . . . . . . . . . . see Strut
POWER-stud® anchors see POWERS
Power Tools . . . . . . . . . . . . 245-458
(see also Milwaukee, DeWalt, Bosch,
Greenlee, Ridgid
Power-Wrap™ . . . . . . . . . . . . . . . . 140
Pre-Insulated Pipe Supports . 200-201
preties . . . . . . . . . . . . . . . . . . . . . . 124
Premium Black Core bits . . . . . . 335
Pressure washer Hose . . . . . . . . 560
Printed Barricade Tape . . . . . . . . 628
Pro Jack . . . . . . . . . . . . . . . . . . . . . 426
Procell® Batteries . . . . . . . . . . . . 530
proforce drop in anchors . . . . . 91
Proof Coil Chain . . . . . . . . . . . . . 574
ProPress Kit . . . . . . . . . . . . . . . . . 439
ProPress Soil cutter . . . . . . . . . 439
Protective Clothing . . . . . . . 619-622
Protractor w/ Magnetic Base . . 366
Proto, Torque Wrench . . . . . . . . 454
Propane heaters . . . . . . . . . . . . . 530
Pry bars . . . . . . . . . . . . . . . . . . . . . 565
Pullers . . . . . . . . . . . 378-381, 576, 580
Pulling Grips . . . . . . . . . . . . . 383-384
Pulling Rope . . . . . . . . . . . . . . . . . 384
Pump Hose . . . . . . . . . . . . . . . . . . . 559
Pumps . . . . . . . . . . . . . . . . . . . . . . . 559
Punch & Die Sets . . . . . . . . . . . . . . 369
Pushover® Load Binders . . . . . . . 575
Putty, Firestop pads . . . . . . . . . . 493
PVC
Cutters . . . . . . . . . . . . . 270, 392, 419
Gloves . . . . . . . . . . . . . . . . . . . . . . 617
Hose . . . . . . . . . . . . . . . . . . . . . . . 560
Heating Blanket . . . . . . . . . . . . . . . 366
Plug Set . . . . . . . . . . . . . . . . . . . . . 366
Shears, M12 . . . . . . . . . . . . . . . . . 270
PVC/ABS Plastic Pipe Hand Saw . . 351
PVC coated wire rope . . . . . . . . . 572
Pyramid (caddy) pipe support
. . . . . . . . . . . . . . 155, 199, 238-241
Abrasives
Pipe
Alignment Guides - Spider Guides . 203
Analysis, Stress . . . . . . . . . . . . . . . 206
Anchors . . . . . . . . . . . . . . . . . . . . . 203
Carts . . . . . . . . . . . . . . . . . . . . . . . 388
Clamp
double bolt . . . . . . . . . . . . . . . . 198
heavy duty . . . . . . . . . . . . . . . . . 198
standard . . . . . . . . . . . . . . . . . . 198
Cutter Wheels . . . . . . . . . . . . . . . . 421
Cutters . . . . . . . . . . . . . . 417-419, 440
Dies . . . . . . . . . . . . . . . . . . . . . . . 413
Dolly/Cart . . . . . . . . . . . . . . . 388, 427
Fabrication, Engineering . Preface B, 206
Freezers . . . . . . . . . . . . . . . . . . . . 429
Groovers . . . . . . . . . . . . . . . . . 414-417
Hanger - V-Clevis Plastic . . . . . . . . 185
Hanger Design & Fabrication Preface B, 206
Hangers . . . . . . . . . . . . . . . . . . 179-244
Roll Stand . . . . . . . . . . . . . . . . . . . 192
Roll Stand with Base - Adjustable . 193
Rollers & Roller Supports . . . . . 190-193
Saddle Support . . . . . . . . . . . . 194-195
Saddle Support - Adjustable . . 194-195
Saddles (Insulation Covering Protection
Saddles) . . . . . . . . . . . . . . . . . . . 191
Shields For Insulation Protection . 186-187
Sleeve Positioner . . . . . . . . . . . . . . 209
Slide Assembly . . . . . . . . . . . . 202-203
Stanchion - Adjustable . . . . . . 194-195
Stanchion Saddle - Adjustable . 194-195
Stands . . . . . . . . . . . . . . . 194-195, 425
Tapping Tools . . . . . . . . . . . . . . . . 423
Thread Taper Taps . . . . . . . . . . 300-301
Threaders . . . . . . . . . . . . . . . . 408-411
Wrenches . . . . . . . . . . . . . . . . . . . . . 442
Pipe & Conduit Clamps . . . . . . . . 140
Pipe & Conduit Hanger . . . . . . . . 139
PIPE HANGERS (see also Hangers)
. . . . . . . . . . . . . . . . . . . . 179-244
Stainless Steel . . . . . . . . . . . . . . . . 154
Pipe Hangers Quick Reference 180-184
PIPE PIER™ . . . . . . . . . . . . . . . . . . . . 242
Pipe Reamers . . . . . . . . . . . . . . . . . 418
PIPE SHIELDS INC., Pre-Insulated
Pipe Supports . . . . . . . . . . . . 200-201
Pipe Sleeves . . . . . . . . . . . . . . 209, 244
Pipe Straps
“EMT” PS 1000 / 700 . . . . . . . . . . 140
“Rigid” PS 1100 / 702 . . . . . . . . . . 140
“Universal” PS 1300 / 703 . . . . . . . 140
O.D. Tubing PS 1200 / 701 . . . . . . 140
Porce-A-Clamp . . . . . . . . . . . . . . . . 140
PS 3792 Power-Wrap™ . . . . . . . . . 140
Pipe Trough . . . . . . . . . . . . . . . . . . 185
Pipefix . . . . . . . . . . . . . . . . . . . . . . . 213
Pipemarkers . . . . . . . . . . . . . . . . . 627
Pipemarking Tape . . . . . . . . . . . . . 627
Plastic Anchors / Kits . . . . . . 108-109
Plastic Pipe Sleeves . . . . . . . 209, 244
Plastic sheeting . . . . . . . . . . 538, 592
plate washer . . . . . . . . . . . . . . . . . 178
Plow Bolts . . . . . . . . . . . . . . . . . . . 52
PLS® Lasers . . . . . . . . . . . . . . . 447-449
Plumb bob . . . . . . . . . . . . . . . . . . . 446
Plumb bob, Laser, M12 . . . . . . . . 272
Plumber Stud Punch . . . . . . . . . . 374
Plumber’s “T” Handle
Torque Tools . . . . . . . . . . . . . . 442
Plumbing Hangers . . . . . . . . . 213-225
Pole tools . . . . . . . . . . . 112, 114, 123
Polifan™ Curve Flap disc . . . . . . . 469
Polly™ Anchor . . . . . . . . . . . . . . . 110
Poly
Sheeting . . . . . . . . . . . . . . . . 538, 592
Woven Blue Tarps . . . . . . . . . 538, 592
Poly-Coated Tyvek® QC . . . . . . . . . 619
Polyester Measure/Pulling Tapes 376
Polyethylene Sheeting . . . . 538, 592
Polypropylene rope . . . . . . . . . . 573
Porce-A-Clamp . . . . . . . . . . . 139-140
Porcelain Cable Clamp . . . . . . . . 140
PortaBands® Blades . . . . . . . . . . 353
Portable Band Saws . . . . . . . . . . 352
Portable Blower Power
Fishing System . . . . . . . . . . . 377-378
Portable Circular Saw . 261, 354-355
Portable Lighting/Light Strings 528
Portable Power Center . . . . . . . 531
Portable Quartz Floodlights . 528
Portable Roll Groovers . 414-415, 417
Posifix, pipefix . . . . . . . . . . . . . . 213
Post Bases & Brackets . . . . . . . . 137
Post Hole Diggers . . . . . . . . . . . . 565
Powder Actuated Fastening 118-124
Power Bits & Nut Setters . . . 10, 315
Power Distribution Center
(Temporary) . . . . . . . . . . . . . . . . 531
POWERS FASTENERS
Bang-It™ . . . . . . . . . . . . . . . . . . . . . 87
Bantam™ Plastic Plug Anchors . . . . 109
Calk-In™ . . . . . . . . . . . . . . . . . . . . . 105
Chem-Stud Capsules . . . . . . . . . . . . 76
Installation Tools . . . . . . . . . . . . . 76
Concrete Vertical Hanger
. . . . . . . . . . . . . . 84, 91, 3, 98, 102
Double Expansion Shield . . . . . . . . 104
Dropins . . . . . . . . . . . . . . . . 90-92, 105
E-Z Anchor . . . . . . . . . . . . . . . . . . 108
Hammer Capsules . . . . . . . . . . . . . . 76
Hollow Set Drop-In . . . . . . . . . 90, 105
Hollow Wall Anchor . . . . . 106, 108-110
LEGS Ancor™ . . . . . . . . . . . . . . . . . 109
Nylon Nailin™ . . . . . . . . . . . . . . . . . 103
Plastic Anchor Kits . . . . . . . 48, 108-109
Power-Bolt® . . . . . . . . . . . . . . . . . . . 86
Power-Stud™ . . . . . . . . . . . . 68-70, 102
Power-Stud™ SD1 . . . . . . . . . . . . . . 69
Power-Stud™ SD2 . . . . . . . . . . . . . . 68
Power-Stud™ SD4 . . . . . . . . . . . . . . 70
Power-Stud™ SD6 . . . . . . . . . . . . . . 70
Powder Actuated Tools . . . . . . . . . 118
P3500 . . . . . . . . . . . . . . . . . . . . 118
PA3500 . . . . . . . . . . . . . . . . . . . 118
P3602 . . . . . . . . . . . . . . . . . . . . 118
Powerfoam™ . . . . . . . . . . . . . . . . . . 81
Safe-T-Pin . . . . . . . . . . . . . . . . . . . . . 104
Screw Anchor Expanders . . . . . . . . 105
Scru™ Lead anchors . . . . . . . . . . . . 105
Sharkie Plastic Anchors . . . . . . . . . 109
Single Expansion Shield . . . . . . . . . 104
Sleeve Anchors . . . . . . . . . . 84, 86, 93
Smart™ Drop In Anchors . . . . . . . . . . 91
Snake Anchors . . . . . . . . . . . . . . . . . 91
Spike Anchors . . . . . . . . . . . . . 93, 102
Flat Head Spike® . . . . . . . . . . . . 102
Installation Tools . . . . . . . . . 93, 102
Mushroom Head Spike® . . . . . . . . . 102
Mushroom Head Type 316 Stainless
Steel Spike® . . . . . . . . . . . . . 102
Rod Hanging - Pipe Spike® . . . . . . 93
Tie Wire Spike . . . . . . . . . . . . . . 102
Steel Side Hanger . . . . . . . . . . . . . . 98
Steel Vertical Hanger . . . . . . . . . . . . 98
Strength Design Anchors, (SD)
. . . . . . . . . . 68-70, 72-73,74-75, 80
Vertigo™ Anchor Hangers . . . . . . . 98-99
OnSite
Supply
(continued)
Safety
P
Rentals
index P - Q
Fasteners
index R
R
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Rentals
Raceway . . . . . . . . . . . . . . . . . . . . . 133
Radio - Job Site . . 252, 263, 274, 284
Radio - Motorola . . . . . . . . . 583-584
Rags . . . . . . . . . . . . . . . . . . . . 556, 593
Rainsuits . . . . . . . . . . . . . . . . . . . . 607
Rakes . . . . . . . . . . . . . . . . . . . . . . . 565
Ram Board . . . . . . . . . . . . . . . . . . . 540
Ram, Greenlee Pumps . . . . . . . . . 371
RAMSET®
Acoustical / Electrical 111-113, 119-124
Acoustical Pre-Ties . . . . . . . . . . . . . 124
Black Track Pins .300 Drive Pins . . 121
Ceiling Clip Assemblies .300 Head . 124
Ceiling Hanger Wire . . . . . . . . . . . . 124
Conduit Clamp . . . . . . . . . . . . 115, 122
Conduit Clip Assemblies . . . . . . . . . 124
Drive Pins . . . . 113, 117, 121-122, 124
Drywall Fastening System - TrakFast 117
Drywall PAT - 721 . . . . . . . . . . . . . 119
Extension Poles . . . . . . . . . . . 112, 123
Fastener Accessories . . . . . . . . . . . 124
Gas Fastening Systems
Loads (Shots) . . . . . . . . . . . . 120-122
Loads For Hilti Tools . . . . . . . . . . 120
Loads For Low Velocity Tools . . . 120
Laser Tool . . . . . . . . . . . . . . . . . . . 446
Pins / Clips . . . . . . . 113, 117, 121-124
Plumbing / Sprinklers PAT . . . 119, 123
Pole Tools . . . . . . . . . . . . . . . 112, 123
Powder Actuated Tools . . . . . . . 11-123
PAT - SA270 . . . . . . . . . . . . . . . 119
DC60 . . . . . . . . . . . . . . . . . . . . . 119
Powder Selection Guide . . . . . . . . . 120
Power Point™ Pins . . . . . . . . . . 121-122
Rodmans Tie Wire . . . . . . . . . . . . . 124
Step Shank Pins w/ Ceiling Clip . . . 122
T3 Tool . . . . . . . . . . . . . . . . . . 111-112
T3 Accessories . . . . . . . . . 112-113, 122
Trak-It Fastening Tools . . . . . . 111, 114
Pole Tools . . . . . . . . . 112, 114, 123
Battery . . . . . . . . . . . . . . . 111, 114
Tool . . . . . . . . . . . 111, 114, 116-117
Accessories . . . . . 111, 114, 116-117
Threaded Rod Hanger . . . . . . . . . . 122
Tie Strap Holder . . . . . . . . . . . . . . 113
Top Hat Pin . . . . . . . . . . . . . . . . . . 121
U-Hank Tie Wire . . . . . . . . . . . . . . 124
Viper . . . . . . . . . . . . . . . . . . . . . . . 123
RapidGrip Wrench . . . . . . . . . . . . 442
Ratchet ACSR / Cable Cutter . . . . 393
Ratchet Cable Cutter . . . . . . . 393-395
Ratchet Punch Driver . . . . . . . . . 370
Ratchet Shears - Clean Room . . 422
Ratchet Type Reel Stands . . . . . . 385
Ratcheting Wrench Sets . . . . . . 454
Rawl . . . . . . . . . . . . . . . . . . see Powers®
Razor blades . . . . . . . . . . . . 444, 592
Reamers . . . . . . . . . . . . . . . . . . . . . 418
Rebar Caps . . . . . . . . . . . . . . . . . . . 627
Rebar Cutters . . . . . . . . . . . . . . . . 323
Rebar Locator, M12 . . . . . . . . . . . 271
Reciprocating Blades . . . . . . 347-350
Reciprocating Saws . . . . 270, 346-347
Red Rosin PAper . . . . . . . . . . . . . . 539
Red Head®
Condrive . . . . . . . . . . . . . . . . . . . . 100
Dynabolt Stainless Steel
Sleeve Anchors . . . . . . . . . . . . . . . . 85
Dynabolt Sleeve Anchors . . . . . . . . . 85
Multi-Set II Drop-In Anchors . . . . . . 92
SDS Stop Bit . . . . . . . . . . . . . . . . . . 92
Tapcon . . . . . . . . . . . . . . . . . . . . . 100
Truebolt Wedge Anchors . . . . . . . . . 83
REED
Clean Room Ratchet Shears . . . . . . 422
Hinged Cutters . . . . . . . . . . . . . . . . 417
Hole Master™ Hole Cutting Base . . . 422
650
REED . . . . . . . . . . . . . . . . . . (continued)
Portable Roll Groovers . . . . . . . . . . 417
Steel Pipe Cutter . . . . . . . . . . . . . . 417
Tristand . . . . . . . . . . . . . . . . . . . . . 424
Reducing Rod Coupling Nuts . 33, 174
Reel Stands . . . . . . . . . . . . . . . 386-387
RELTON
Stop-Bits . . . . . . . . . . . . . . . . 178, 322
Rebar Cutters . . . . . . . . . . . . . . . . 323
Resin Fiber Discs / Backing Pads 479
Respirators . . . . . . . . . . . 594, 612-613
Respiratory Protection . . . . 612-613
Retaining Strap for
Steel C-Clamp . . . . . . . . . . . 188-189
Retaining Straps . . . . . . . . . . 188-189
Retractable Lifeline . . . . . . . 605-606
Return Line Angles . . . . . . . . . . . 217
Return Line J-Hook . . . . . . . . . . . 218
Reversible Lock Nuts . . . . . . . . . . . 32
RIDGID®
1224 Threading Machine . . . . . . . . 410
141 / 161 Geared Threaders . . . . . 412
206 Soil Pipe Cutter . . . . . . . . . . . 419
226 In-Place Soil Pipe Cutter . . . . . 419
246 Soil Pipe Cutter . . . . . . . . . . . 419
276 Soil Pipe Cutter . . . . . . . . . . . 419
258 & 258XL Power Pipe Cutter . . . . 418
300 Threader . . . . . . . . . . . . . . . . 408
300 Compact Threader . . . . . . . . . 409
300 Series Lever Benders . . . . . . . 419
418 Oiler . . . . . . . . . . . . . . . . . . . . 413
460 Tri-Stand Chain Vise . . . . . . . . 424
535 Manual Threading Machine . . . . . 409
690 Power Drive . . . . . . . . . . . . . . 411
915 Portable Roll Groover . . . . . . . 414
916 Portable Roll Groover . . . . . . . 414
918 Hydraulic Roll Groover . . . . . . 416
918I Portable Roll Groover . . . . . . 415
920 Portable Roll Groover . . . . . . . 416
975 Roll Groover . . . . . . . . . . . . . . 415
Aluminum Pipe Wrench . . . . . . . . . 442
Chain Wrench . . . . . . . . . . . . . . . . 442
Dies / Die Heads / Die Head Racks 412-413
Drain & Sewer Inspection . . . . 430-436
Dry Cut Saw . . . . . . . . . . . . . . . . . 358
DVD/Video Recorder . . . . . . . . 430-434
End Pipe Wrench . . . . . . . . . . . . . . 442
F-Series Vises . . . . . . . . . . . . . . . . 586
HC-300 Hole Cutting Tool . . . . . . . 422
Heavy-Duty Pipe Cutters . . . . 417, 419
KOLLMANN
Drain Cleaners . . . . . . . . . . . . . 441
K-3/K-6 Toilet Augers . . . . . . . . . 441
Super Freeze™ Pipe Freezing Tools 429
LT1000 Laptop Interface . . . . . . . . 435
Manual Pipe Threaders . . . . . . . . . 411
Midget Tubing Cutters . . . . . . . . . . 420
Oiler . . . . . . . . . . . . . . . . . . . . . . . 413
Pipe Cutters & Cutter Wheels 418, 421
Pipe Dies . . . . . . . . . . . . . . . . . . . 413
Pipe Reamers . . . . . . . . . . . . . . . . 418
Pipe Stands . . . . . . . . . . . . . . . 424-425
Pipe Wrenchs . . . . . . . . . . . . . . . . 442
Plastic Pipe Tubing Cutters . . . . . . . 420
“Pony” Power Threading Model 700
Power Drive . . . . . . . . . . . . . . . . 411
Power Threading Machine . . . . 408-411
ProPress Kit . . . . . . . . . . . . . . 439-440
ProPress Soil Pipe Cutter . . . . . . . . 440
Quick-Acting Tubing Cutter . . . . . . . 420
RapidGrip Wrench . . . . . . . . . . . . . 442
RT3422 Tapping Tool . . . . . . . . . . . 423
Roll Groovers . . . . . . . . . . . . . . 414-416
Seektech . . . . . . . . . . . . . . . . . 437-438
SeeSnake® . . . . . . . . . . . . . . . 430-435
Super-Freeze . . . . . . . . . . . . . . . . . 429
Tapping Tool . . . . . . . . . . . . . . . . . 423
Thread Cutting Oil . . . . . . . . . . . . . 407
Thread Sealant . . . . . . . . . . . . . . . 407
Threader Stands . . . . . . . . . . . . . . 410
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
RIDGID® . . . . . . . . . . . . . . (continued)
Tubing Cutters/Wheels . . . . . . . 420-421
Tristands . . . . . . . . . . . . . . . . . 424-425
Wet & Dry Vacuum Filters . . . . . . . 557
Wet & Dry Vacuums . . . . . . . . . . . . 557
Right Angle Clips . . . . . . . . . 113, 115
Right Angle Pipe Clamp . . . . . . . . 139
Rigid Seismic Bracing Systems TOLCO . . . . . . . . . . . . . . . . 226-230
Rigid Pipe Clamps - Fiberglass . 150-151
Rigid Pipe Clamps . . . . . . . . . . . . . 140
Fiberglass . . . . . . . . . . . . . . . . . 150-151
Ripping Bars . . . . . . . . . . . . . 444, 565
Riser Clamps . . . . . . . . . . . . . 185, 218
Rivets / Rivet Tools . . . . . . . . . . 62-63
Rivets Actual Size Chart . . . . . . . . 63
Rize Hanging Systems . . . . . 167, 234
Rod anchors . . . . . . . . . . . . . . . . 82-99
Rod Angle Side Beam Attachment 217
Rod Coupling Nuts . . . . 33, 221, 221
Rod Couplings . . . . 33, 221, 179, 221
Long Length . . . . . . . . . . . . . . 174, 221
Reducing . . . . . . . . . . . . . . . . 174, 221
Standard . . . . . . . . . . . . 221, 179, 221
Rod, forged ends . . . . . . . . . . . . . 576
Rod Hanger Clips . . . . . . . . . . . . . 115
Rod Insulator Support . . . . . . . . 138
Rod Lock
Beam Clamps . . . . . . . . . . . . . . . 127
Channel Nuts . . . . . . . . . . . . . . 127
Rod, threaded . . . . . . . . . . . 171-178
Rodmans Tie Wire . . . . . . . . . . . . . 124
Roll Groovers - Portable . . . 414-417
Roller Chairs . . . . . . . . . . . . . 191-193
Roller, Hangers . . . . . . . . . . . 190-193
Rollers, Strut . . . . . . . . . . . . . . . 137
roof anchors . . . . . . . . . . . . . . . . 604
Roof Boots . . . . . . . . . . . . . . . . . . 244
Roof Deck PLates . . . . . . . . . . . . . . 51
Roof Leak Diverter, Temporary . . 540
Roofers Kit - Fall Restraint . . . . 602
Roofgrip Deck Screws . . . . . . . . . 51
Roofing Nails . . . . . . . . . . . . . . . . 594
Rooftop Supports . . . 155, 236-242
Advance Support Products . . . . . . 241
Caddy Pyramid . . . . . . . . 155, 238-242
B-Line Dura-Blok (C-Port) 155, 236-237
MIRO . . . . . . . . . . . . . . . . . . . . . . 241
Pipe-Pier . . . . . . . . . . . . . . . . . . . 242
Rope . . . . . . . . . . . . . . . . . . . . 573, 593
Rope, wire . . . . . . . . . . . . . . . . 571-572
Rope Grabs . . . . . . . . . . . . . . 595, 606
Rotary Hammers . . . . . . . . . . . 317-320
Rotary Hammer Bits for SDS,
SDS-Max & Spline
. . . . . . . . . . 317, 321-323, 326-330
Roto-Zip . . . . . . . . . . . . . . . see DeWalt
Rotten Cotton (Mineral wool) . 501
Round & Square Point Shovels 564
Round Brute ® Receptacles . . . . . 549
Round Waterstop Sleeves . . . . . 209
Roust-A-Bout . . . . . . . . . . . . . . . . . 429
Rubber
Hose . . . . . . . . . . . . . . . . . . . . . . . 560
Straps . . . . . . . . . . . . . . . . . . . . . . 538
Washers, Hose . . . . . . . . . . . . . . . . 560
RUBBERMAID®
Big Wheel® Cart . . . . . . . . . . . . . . . 566
Big Wheel™ Container . . . . . . . . . . . 549
Brute® Mop Bucket . . . . . . . . . . . . 550
H.D. Utility Cart . . . . . . . . . . . . . . . 548
Light Duty Utility Cart . . . . . . . . . . 548
Mops, Handles, Buckets . . . . . . . . . 550
Tilt Trucks . . . . . . . . . . . . . . . . . . . 548
Trash Barrels (Round) . . . . . . . . . . 549
RUST-OLEUM
Overall Industrial Aerosol Paint . . . 543
Performance Industrial Enamels . . . 543
Upside-Down Marking Paints . . . 543-544
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
651
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
sakrete
Concrete Mix . . . . . . . . . . . . . . . . . 566
Hydraulic Cement . . . . . . . . . . . . . 566
Non-Shrink Grout . . . . . . . . . . . . . 566
SAMMY Screws 14-15, 94-97, 222-225
Sammy Express Hangers . . . 96, 224
Sammy Speedy Pole . . . . . . . 97, 225
Sammy Sockets . . . . . . . . . . . 97, 225
Sammy Swivel . . . . . . . . . . . . . 95-97
Sanders & Grinders . . . . . . . . 339-344
Sandpaper . . . . . . . . . . . . . . . . . . . 473
sausage Pack (Firestop) . . . . . 490, 502
Sawing Fluids . . . . . . . . . . . . . . . . 598
SAw blades
Asphalt . . . . . . . . . . . . . . . . . . . . . 331
Band Saw . . . . . . . . . . . . . . . . 596-597
Band Saw, Portable . . . . . . . . . . . . 353
Chop . . . . . . . . . . . . . . . . . . . . . . . 359
Concrete . . . . . . . . . . . . . . . . . . . . 331
General Purpose, Circular . . . . . . . 357
Hacksaw . . . . . . . . . . . . . . . . . . . . 351
Hackzall®, Recip Blades . . . . . . . . . 270
Jig . . . . . . . . . . . . . . . . . . . . . . . . . 345
Metal Cutting, Circular . . . . . . . . . . 357
Reciprocating . . . . . . . . . . 270, 347-350
Segmented High Speed . . . . . . . . . 331
Sawzall® . . . . . . . . . . . . . . . . . 346-347
Blades - Milwaukee . . . . . . . . 348-348
Reciprocating Saw Blades 270, 347-350
Scaffolds . . . . . . . . . . . . . . . . . . . 526
Scaffold Tags . . . . . . . . . . . . . . . . 525
SCH Series 1-Pc Strut Clamps . . . 161
Scotchbrite Pads . . . . . see Hand Pads
Scratch Brush - Curved Handle
. . . . . . . . . . . . . . . . . . . . . 484, 553
Screw Guns/TEK Drivers . . . . 313-314
Screw - Laminating . . . . . . . . . . . . . 5
Screw Pin Anchor Shackles . . . . 574
Screws
Brass . . . . . . . . . . . . . . . . . . . . . . 54-55
Blackies (Framer Screws) . . . . . . . . . . 4
Cabinet . . . . . . . . . . . . . . . . . . . . . . . 9
Carriage . . . . . . . . . . . . . . . . . . . . . 26
Cement Board . . . . . . . . . . . . . . . . . . 8
Coach . . . . . . . . . . . . . . . . . . . . . . . 51
Deck . . . . . . . . . . . . . . . . . . . . . . . . . 6
Eyelag . . . . . . . . . . . . . . . . . . . . . . . . 7
Screws . . . . . . . . . . . . . . . (continued)
Framer - Sharp point . . . . . . . . . . . . . 4
Fiber Cement Board . . . . . . . . . . . . . . 8
Floor Board, Torx . . . . . . . . . . . . . . . . 4
Green Grounding . . . . . . . . . . . . . . . 51
High/Low Drywall . . . . . . . . . . . . . . . . 6
Lag . . . . . . . . . . . . . . . . . . . . . . . . . 26
Stainless Steel . . . . . . . . . . . . . . . 49
Laminating . . . . . . . . . . . . . . . . . . . . . 5
Machine Screws
Flat, Phillips Machine Plated . . . . . 44
Fillister Slotted Machine Plated . . 44
Flat, Slotted Machine Plated . . . . . 43
Pan, Phllips Plated . . . . . . . . . . . . 42
Round Combo, Plated . . . . . . . . 40-41
Truss, Slotted . . . . . . . . . . . . . . . . 41
Stainless Steel . . . . . . . . . . . . . 45-46
Metric . . . . . . . . . . . . . . . . . . . 60-61
Pan, Slotted, Plated . . . . . . . . . . . 40
Roofgrip Steel Decking . . . . . . . . . 51
Sammy’s . . . . . . . . . . . 12-15, 94-97
Security (Tamperproof) . . . . . . . . . 50
Self-Drilling, TEKS
410 Stainless . . . . . . . . . . . . . . . . . 3
Drywall . . . . . . . . . . . . . . . . . . . . . 6
Eye Lag . . . . . . . . . . . . . . . . . . . . . 7
Framer, pancake . . . . . . . . . . . . . . 4
Hex Washer, #2 & #3 pt. . . . . . . . . 2
Hex, w/ neoprene washer . . . . . . . . 7
High Hex Head, #3 pt. . . . . . . . . . . 3
Pan Framer Tek . . . . . . . . . . . . . . . 4
Sheet Rock . . . . . . . . . . . . . . . . . . . 6
Stitch . . . . . . . . . . . . . . . . . . . . . . . 3
Trim Head . . . . . . . . . . . . . . . . . . . 6
Wafer K Lath . . . . . . . . . . . . . . . . . 4
Wafer, plymetal . . . . . . . . . . . . . . . 4
Sheetmetal
Flat, Phillips, plated . . . . . . . . . . . 48
Hex Washer, Slotted, plated . . . . . 48
Pan Combo, plated . . . . . . . . . . . . 47
Pan, Phillips, plated . . . . . . . . . . . 47
Stainless Steel . . . . . . . . . . . . . . . 49
Set Screws . . . . . . . . . . . . . . . . . . . 59
Socket . . . . . . . . . . . . . . . . . . . . . . . 59
Thumbscrews . . . . . . . . . . . . . . . . . . 51
Tie Wire Acoustical Toggle . . . . . . . . . 7
Vertigo . . . . . . . . . . . . . . . . . 16, 98-99
Wafer K-Lathe, sharp point . . . . . . . . 4
Wall Dog . . . . . . . . . . . . . . . . . 15, 107
Wood, brass . . . . . . . . . . . . . . . . . . 56
Zip Screws . . . . . . . . . . . . . . . . . . . . . 4
Scru ™ Lead Anchors . . . . . . . . . . 105
Scrubs® Hand Cleaner Towels
. . . . . . . . . . . . . . . . . . . . . 554, 556
SDS Hammer Bits . . . . . . . . . . . 321-323
SDS Plus Rotary Hammers . . 318-320
SDS Shank Carbide Tipped Bits 321-323
SDS Stop Bits . . . . . . . . . . . . . . 92, 322
SDS-Max Shank Hammer Bits . 326-330
Sealing Washer . . . . . . . . . . . . . . . 115
Sealants, Firestop . . . . . . . . . 490-502
Security locks . . . . . . . . . . . . . . . 537
Security / Tamper Proof Screws 50
SEEKONK® Plumber’s “T” Handle
Torque Tools . . . . . . . . . . . . . . 442
SEEKTECH™ . . . . . . . . . . . . . 430, 437-438
SeeSnake® . . . . . . . . . . . . . . . . 430-435
Segmented Dry High Speed Blades
. . . . . . . . . . . . . . . . . . 331, 466-467
Seismic Bracing Systems -
Rigid Component - TOLCO . . 226-230
Seismic / Tension Zone Anchors
. . . . . . . . . . . . . . . . . . . . . . . 68- 75
Self Drilling Drywall Screws . . . . 6
Self Drilling Eye Lag Screws . . . . . 7
Self Drilling Screws . . . . see Screws
Self Piercing (Slotted) Hex Washer
Head Needle Point Sheet Metal
Screws . . . . . . . . . . . . . . . . . . . . . . 4
OnSite
Supply
"66" Clip . . . . . . . . . . . . . . . . . . . . . . 197
S Hooks . . . . . . . . . . . . . . . . . . . . . 575
Saddles . . . . . . . . . . . . . . . . . . . . . 191
SAG Rod . . . . . . . . . . . . . . . . . . . . . 177
SAE Flat Washers . . . . . . . . . . . . . . 36
SAFETY . . . . . . . . . . . . . . . . 599-630
Anchors . . . . . . . . . . . . . . . . . . . . . 604
Barricade Lights . . . . . . . . . . . . . . . 628
Barricades . . . . . . . . . . . . . . . . . . . 628
Cans . . . . . . . . . . . . . . . . . . . 563, 595
Cones . . . . . . . . . . . . . . . . . . . . . . 628
Eye & Skin Flush Station . . . . . . . . 618
Eyewear . . . . . . . . . . . . . . . . . 608-609
Faceshields . . . . . . . . . . . . . . 610, 622
Fall Protection . . . . . . . . . . . . . 600-606
Fencing . . . . . . . . . . . . . . . . . 566, 594
Fire Extinguishers . . . . . . . . . . . . . 627
First Aid Kits . . . . . . . . . . . . . . . . . 618
Gloves . . . . . . . . . . . . . . . . . . . 614-617
Hard Hats . . . . . . . . . . . . . . . . 610-611
Harnesses . . . . . . . . . . . . . . . . 600-602
Hearing Protection . . . . . . . . . . . . . 607
High Voltage Protection . . . . . . . 18-622
Lifelines . . . . . . . . . . . . . . . . . . . 605-606
Lockouts . . . . . . . . . . . . . . . . . . . . 623
Pipemarkers . . . . . . . . . . . . . . . . . 627
Protective Clothing . . . . . . . . . . 618-621
Rebar Caps . . . . . . . . . . . . . . . . . . 627
Respiratory Protection . . . . . . . 612-613
Rope Grabs . . . . . . . . . . . . . . . . . . 606
Self Retracting Lifeline . . . . . . . 605-606
Signs . . . . . . . . . . . . . . . . 625-626, 628
Traffic Vests . . . . . . . . . . . 595, 629-630
Winter Liners . . . . . . . . . . . . . . . . . 618
Safety Cans . . . . . . . . . . . . . . 563, 595
Safety Eyewear . . . . . . . . . . . . 608-609
Safety Fall Protection . . . . . 600-606
Safety Fencing . . . . . . . . . . . 566, 594
Safety Lifelines . . . . . . . . . . . . 605-606
Safety Lockouts . . . . . . . . . . . . . . 623
Safety Plate - Diamond 4-Way . . 209
Safelight Harness / Lanyards . . 600
Carabiners . . . . . . . . . . . . . . . 603, 606
Concrete Anchor Straps . . . . . . . . . 604
Confined Space 3-Way System . . . . 606
Cross-Arm Strap . . . . . . . . . . 601, 604
Fall Protection Kit . . . . . . . . . 600, 602
Girder Grip . . . . . . . . . . . . . . . . . . 604
Hand Winch Man Rated . . . . . . . . . 606
Manuclave . . . . . . . . . . . . . . . . . . . 604
Fall Limiter . . . . . . . . . . . . . . . . . . 605
Rebar Assemblies . . . . . . . . . . . . . 603
Retractable Lifeline . . . . . . . . . . . . 605
SafeClaw . . . . . . . . . . . . . . . . . . . . 604
Roofers Kits . . . . . . . . . . . . . . . . . . 602
Shock Absorbing Lanyards . . . . 600-603
Steel Erection Lanyard for 12’ . . . . 600
Tybak® Lanyard . . . . . . . . . . . . . . . 603
SAIT
5/8-11 Adaptor . . . . . . . . . . . . . . . 463
Aluminum Oxide Abrasive Belts . . . 474
Aluminum Oxide Fiber Discs . . . . . 478
Backing Pads . . . . . . . . . . . . 477, 479
Carbide Burs . . . . . . . . . . . . . . . . . 482
Cartridge Rolls, Mandrell . . . . . 481-482
Convolute Wheels . . . . . . . . . . . . . 480
Cup Brushes for Small Grinders . 485-487
EZ-Chop™ . . . . . . . . . . . . . . . . . . . 464
Flap Wheels . . . . . . . . . . . . . . . 470-471
Fiber Discs . . . . . . . . . . . . . . . . . . 478
Flap Discs, Ovation™ . . . . . . . . . . . 469
Grinding Wheels . . . . . . . . . . . 460-462
Hand Pads . . . . . . . . . . . . . . . 472, 553
Handy Rolls . . . . . . . . . . . . . . . . . . 472
Knot & Crimped Wire Wheels . . 483-488
Nylon Abrasive Brushes . . . . . . . . . 485
Saitlam F - Flap Discs . . . . . . . . . . 468
SAIT . . . . . . . . . . . . . . . . . (continued)
Type 1 Chop Saw Wheels . . . . . . 464
Type 1 High Speed Cut Off Wheels 463, 465
Type 27 .045 Cutting Wheels . . . . . 462
Type 27 Grinding Wheels . . . . . . . . 460
Type 27 Specialty Cutting & Light
Grinding Wheels . . . . . . . . . . . . . 461
Saitlam F - Flap Discs . . . . . . . . . . 468
Sait-Lok™ & Sait-Lok-R™
Specialty Laminated Discs . . 476-478
Sait-Lok™ Backing Pads . . . . . 477, 479
Saitscreen . . . . . . . . . . . . . . . . 472-473
Sand-Light™ Surface Conditioning
Backing Pads & Discs . . . . . 477, 479
Sand-Light™ Non-Woven Rolls . . . . 471
Sand-Light™ Surface Conditioning
Sandpaper . . . . . . . . . . . . . . . . . 473
Surface Conditioning Belts . . . . . . . 475
Type 1
Bench Grinding Wheels . . . . . . . . 484
Chop Saw Wheels . . . . . . . . . . . 464
Cut-Off Wheel Reducing Bushings 467
High Speed Cut Off Wheels . . . . 462-465
Type 11 Cup Wheels . . . . . . . . . . . 467
Type 27 .045 Cutting Wheels . . . . . 462
Saitech Ultimate Performance™ 462
Type 27 Grinding Wheels . . . . . 460-461
Type 27 Specialty Cutting & Light
Grinding Wheels . . . . . . . . . . . . . 461
Type 28 Grinding Wheels . . . . . 461-462
Saitech Ultimate Performance™ . 461-462
Unitized Wheels . . . . . . . . . . . . . 480
Safety
S
Rentals
index S
Fasteners
index s
S
(continued)
Anchors
Strut
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
OnSite
Supply
Safety
Rentals
Self Retracting Lifelines . . . . . . 605
Selfeed Bits . . . . . . . . . . . . . . . 311-312
Self-Tapping Screws . . . . see Screws
Sentry III™ Cap Hard Hat . . . . . . . 610
Shackles, screw pin . . . . . . . . . . . 574
Shallow Strut . . . . . . . . . . . . . . . 130
Shears/Nibbler . . . . . . . . . . . . . . . 360
Sheaves . . . . . . . . . . . . . . . . . . . . . . 383
Sheet Metal Screws . . . see Screws
Combo Head . . . . . . . . . . . . . . . . . 47
Flat Phillips . . . . . . . . . . . . . . . . . . . 48
Pan Phillips . . . . . . . . . . . . . . . . . . 47
Self Piercing (Slotted) Hex Washer
Head Needle Point . . . . . . . . . . . . 4
Slotted Hex Washer . . . . . . . . . . . . 48
Sheet Metal Tool - Vise-Grip . . . . 456
Sheeting . . . . . . . . . . . . . . . . . 538, 592
Shelf Bins / Dividers . . . . . . . . . . . 567
Ship Auger Bit . . . . . . . . . . . . . . . . 309
shop-vac (see vacuums) . . . . . . . . . 557
Short 2-Hole Strap . . . . . . . . . . . 218
Shots and Pins . . . . . . . . . . . . 112-124
Shovels / Scoops . . . . . . . . . . . . . 564
Side Beam Bracket . . . . . . . . . . . . 217
Side Beam Clamps - Adjustable . 196
Side Beam Connector
Malleable Iron . . . . . . . . . . . . . 217
Side Cutting Pliers . . . . . . . . . . . . 390
Side Lock “J” Hanger . . . . . . . . . . 218
signs . . . . . . . . . . . . . . . . . 625-626, 628
Seismic Bracing Systems . . . . 226-230
Silencer (Holdrite) . . . . . . . . . . . . 144
Silicone Caulk . . . . . . . . . . . . . . . . 544
Silt Fence . . . . . . . . . . . . . . . . . . . . 566
Silver & Deming Drills . . . . 297-299
Simple Green Cleaners . . . . . . . . 554
Single Expansion Shield . . . . . . . 104
Single Jack Chain . . . . . . . . . . . . 574
Single Rod Rollers
Clevis Type Rollers) . . . . . . . . . 190
Site-Rite® Hand Benders . . . . . . . 361
"Sixty-six" Clip . . . . . . . . . . . . . . . . 197
SK Series Universal Strut Clamp 161
Sledge Hammers . . . . . . . . . . . . . . 565
Sleeve Anchors . . . . . . . . . . 84-86, 93
Sleeves . . . . . . . . . . . . . . . . . . 209, 244
Sleeves, Firestop . . . . . . . . . . 490-502
Slick Nut, Caddy . . . . . . . . . . . . . . 135
Slide Configuration . . . . . . . . . . 202
Slip-On Lock Nuts . . 31, 134-135, 173
Slotted Angle . . . . . . . . . . . . . . . . 132
Slings
chain . . . . . . . . . . . . . . . . . . . . . . . 579
wire rope . . . . . . . . . . . . . . . . . . . . 580
nylon . . . . . . . . . . . . . . . . . . . . 581-582
Slotted Nuts . . . . . . . . . . . . . . . . . . 33
Slotted Support System . . . . . . . 132
Slug-Buster® Hydraulic
Driver Kits . . . . . . . . . . . . . . 370-371
Slush Boot . . . . . . . . . . . . . . . . . . 607
Smart Quad Bender® 855 . . . . . . . 362
Smart Nut . . . . . . . . . . . . . . . . . . . 165
Snake Anchors . . . . . . . . . . . . . . . . 91
SNAP-N-STRUT™ . . . . . . . . . . . . . . . 144
Snips, metal cutting . . . . . . . . . . 444
Soap stone markers . . . . . . . . . . 542
Soaper Monkey . . . . . . . . . . . . . . . 382
Socket Clamp w/ Washer,
Underground . . . . . . . . . . . . 243
Socket Set Screws . . . . . . . . . . . . . 59
Socket Sets . . . . . . . . . . . . . . . 451-455
Socket Washers . . . . . . . . . . . 52, 243
Soil Pipe Cutters . . . . . . . . . 419, 440
Solid Raceway . . . . . . . . . . . . . . . . 133
Sorbents . . . . . . . . . . . . . . . . . . . . 558
Spade Bits / Auger Bits . . . . 298, 309
Special U-Bolt . . . . . . . . . . . . . . . . 176
652
Speed Link . . . . . . . . . . . . . . . 168, 235
SpeediCut Gas Saw . . . . . . . . . . . . 331
Spider Guides - Pipe Alignment
Guides . . . . . . . . . . . . . . . . . . . . . 201
Spike Anchors . . . . . . . . . . . 93, 102
Installation Tools . . . . . . . . . . . . . . 102
Flat Head Spike® . . . . . . . . . . . . . . 102
Mushroom Head Spike . . . . . . . . . . 102
Steel Spike® . . . . . . . . . . . . . . . . . . 102
Rod Hanging . . . . . . . . . . . . . . . . . . 93
Tie Wire Spike® . . . . . . . . . . . . . . . 102
Spin-In Capsules . . . . . . . . . . . . . . . 76
Spline Drive Rotary Hammers . . . 325
Spline, SDS & SDS Max Hammer
Accessories Bits . . . . . . . . . 326-330
Split Ring Hanger . . . . . . . . . . . . . 217
Split Sleeve . . . . . . . . . . . . . . . . . . 209
Spray Cleaners . . . . . . . . . . . . . . . 554
Spray paint . . . . . . . . . . . . . . . 543-544
Sprayers . . . . . . . . . . . . . . . . . . . . . 563
Spring (Channel) Nuts . . . . . . 134-135
Spring Clamps . . . . . . . . . . . . . . . . 587
Spring Hangers - Constant
Supports - Sway Braces . . . . . . 204
Spring Nuts Short / Regular / Long . . . 134-135
Spring Pins (Roll Pins) . . . . . . . . . 58
Sprinkler Rings (EMLOK) . . . . . . . 221
Spud Wrenches . . . . . . . . . . . . . . . 453
Square “Fish” Plates . . . . . . 178, 217
Square Drive Impact Wrenches
. . . . . . . . . . . . . . 258-259, 280, 316
Square Insert & Power Bits . . . . 315
Square Nuts . . . . . . . . . . . . . . . . . . 33
Square Point Shovels . . . . . . . . . 564
Square Bevel Washer . . . . . . . . . . 21
Squeegees . . . . . . . . . . . . . . . . . . . 552
Spray paint . . . . . . . . . . . . . . . 543-544
Stainless STEEL Strut . . . . . . . . 154
Stainless Steel
A193 B8 Hex Cap Screws . . . . . . . . 25
A193 B8M Hex Cap Screws . . . . . . . 25
Button Head Cap Screws . . . . . . . . . 59
Finished Hex Nuts . . . . . . . . . 28-29, 34
Hangers . . . . . . . . . . . . . . . . . . . . . 154
Hangers Hardware . . . . . . . . . . . . . 154
Heavy Hex Nuts . . . . . . . . . . . 28-29, 34
Hex Cap Screws . . . . . . . . . . . . . . 28-29
Hex Machine Screw Nuts . . . . . . . . . 34
Lag Screws . . . . . . . . . . . . . . . . . . . 51
Machine Screws . . . . . . . . . . . . . . 45-46
Self-Drilling . . . . . . . . . . . . . . . . . . 3, 5
Sheet Metal Screws . . . . . . . . . . . . . 49
Strut / Hardware . . . . . . . . . . . . . . 154
Threaded Rod . . . . . . . . . . . . . . . . 173
Stakfix . . . . . . . . . . . . . . . . . . . . . . 213
Standard Double Bolt Pipe Clamp .198
Standard Pipe Clamp . . . . . . . . . . 198
STANLEY ®
1991® Regular Duty Utility Blade . . 444
Adapters . . . . . . . . . . . . . . . . . . . . 453
Adjustable Spud Wrench . . . . . . . . 453
Adjustable Wrenches . . . . . . . . . . . 453
Foot Pound Torque Wrenches
- Ratchet Head . . . . . . . . . . . . . . 454
Brass Plumb Bob . . . . . . . . . . . . . . 446
Chalk Line Reels . . . . . . . . . . . . . . 446
Chalk Refills . . . . . . . . . . . . . . . . . . 446
Classic 99® Retractable Utility Knife 444
Combination Squares . . . . . . . . . . . 445
Combination Wrenches . . . . . . 453-454
Drive Extension . . . . . . . . . . . . . . . 453
FatMax® Brassbound Hardwood Level 445
FatMax® Chalk Line Reel . . . . . . . . 446
FatMax® Level . . . . . . . . . . . . . . . . 445
Forged Hexagonal Steel Ripping Bar 444
High Access Ratcheting Wrench Set 454
Impact Sockets . . . . . . . . . . . . . . . 452
Layout Tools . . . . . . . . . . . . . . 445-446
Maxsteel™ Aviation Snips . . . . . . . 444
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
STANLEY® . . . . . . . . . . . . (continued)
Offset Striking Wrenches . . . . . . . . 454
Pear Head Ratchets . . . . . . . . . . . . 452
Putty Knives . . . . . . . . . . . . . . . . . 446
Quick Square® Layout Tool . . . . . . . 445
Socket Sets . . . . . . . . . . . . . . . 451-454
Solid Hardwood Tri Square . . . . . . . 445
Structural Wrenches - Offset Head . 453
Universal Joints . . . . . . . . . . . . . . . 453
Wonder Bar® Pry Bar . . . . . . . . . . . 444
Sockets / Wrenches . . . . . . . . . 451-454
Tape Rules . . . . . . . . . . . . . . . . . . . 443
Steel Beam Clamps . . . . . . . . . 198-197
Steel Bracket . . . . . . . . . . . . . . . . 198
Steel Cut Saws . . . . . . . . . . . . 354-356
Steel Erection Lanyard . . . . . 600-606
Steel Fish Tapes . . . . . . . . . . . . . . 375
Steel Mortar Mixing Pan . . . . . . 566
Steel Pipe Cutter . . . . . . . . . . . . . 417
Steel Plate . . . . . . . . . . . . . . . . . . . 213
Steel Side Hanger . . . . . . . . . . . . . 217
Step Bits . . . . . . . . . . . . . . . . . . . . . 303
Step Ladders . . . . . . . . . . . . . . . . . 524
Step Shank Pins . . . . . . . . . . . . . . 113
STI (Firestop) . . . . . . . . . . . . . 491-499
STICK-E Accessories . . . . . . . . . . . 114
STICK-E Step Shank Pins . . . . . . . . 114
Stitch Tek Self Drilling Screw . . . . 3
STOP-Bits . . . . . . . . . . . . . . . . 92, 322
stop signs . . . . . . . . . . . . . . . . . . . 628
Storage Boxes . . . . . . . . . . . . 532-536
Stout Brackets & Clamps . . . 214-215
Straight Pipe Sleeve . . . . . . . . . . . 209
Straight Shank Pins . . . . . . . . 113-117
Strainer, Hose . . . . . . . . . . . . . . . 560
Strap - “Short” 2-Hole . . . . . . . . 218
Strap Hanger Clips . . . . . . . . . . . 165
Strap Toggle Anchor . . . . . . . . . 110
Strap Washer . . . . . . . . . . . . . . . . 115
STRENFLEX SLINGS . . . . . . . . . . 580-582
Endless Roundslings . . . . . . . . . . . . 582
Nylon Slings . . . . . . . . . . . . . . . . . . 581
Tie Downs, Ratcheting . . . . . . . . . . 581
Wire Rope & Slings . . . . . . . . . . . . 580
Strength Design Anchors, (SD)
. . . . . . . . . . 68-70, 72-73,74-75, 80
stress analysis, pipe . . . . . . . . . 206
Striking Wrench . . . . . . . . . . . . . . 454
Strip Brooms . . . . . . . . . . . . . . . . 551
Striping Paint & Machines . . . . . 544
Stripper Bolts . . . . . . . . . . . . . . . . . . .
. . . . . . see Socket Shoulder Screws
Strong Back Channel Assembly 208
Structural
Bolts . . . . . . . . . . . . . . . . . . . 18, 20-21
Nuts . . . . . . . . . . . . . . . . . . . . . . . . 21
Wrenches - Offset Head . . . . . . 453-454
STRUT . . . . . . . . . . . . . . . . . 125-170
1-5/8” “Back-to-Back” Strut . . . . . . 131
1-5/8” “Deep” Strut . . . . . . . . . . . . 130
13/16” “Shallow Strut . . . . . . . . . 130
2-7/16” “Deep” Strut . . . . . . . . . . . 131
3-1/4” “Deep” Strut . . . . . . . . . . . . 132
Channel & Combinations . . . . . . . . 128
Channel Hole Pattern . . . . . . . . . . . 129
Channel Nut for Strut . . . . . . . 127, 134
Channel Overview . . . . . . . . . . 128-129
Closure Strip . . . . . . . . . . . . . . 132-133
Concrete Insert Strut . . . . . . . . . . . 133
Fittings . . . . . . . . . . . . . . . . . . 136-137
90° Angle Fittings . . . . . . . . . . . . 136
Angular Fittings . . . . . . . . . 136, 138
Brackets . . . . . . . . . . . . . . . . . . 137
Flat Plate Fittings . . . . . . . . . . . . . . 136
Miscellaneous Fittings . . . . . 136-137
Post Bases . . . . . . . . . . . . . . . . . 137
U-Bolt Fittings . . . . . . . . . . . . . . 139
U-Fittings . . . . . . . . . . . . . . . . . 138-139
Z-fittings . . . . . . . . . . . . . . . . . . 139
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
Philadelphia, PA
610-647-8070
Washington D.C.
877-419-2755
Boston , MA
800-645-6155
Hartford, CT
800-969-0285
653
Fasteners
Anchors
Strut
Threaded
Rod
Pipe
Hangers
T3 Fastening Tool . . . . . . . . . 111-113
Accessories . . . . . . . . . . . . . . . 111-113
Battery . . . . . . . . . . . . . . . . . . 111-113
T.J. COPE & P.W. INDUSTRIES
Cable Tray Systems . . . . . . . 146-149
Tacky Mats . . . . . . . . . . . . . . . . . . . 556
Tamper Proof Screws . . . . . . . . . . 50
Tap Bolts - Fully Threaded . . . . . . 26
Tapcons . . . . . . . . . . . . . . . . . . . . . 100
Tank sprayer . . . . . . . . . . . . . . . . . 563
Tape Measures . . . . . . . . . . . . . . . . 443
Tape
Caution . . . . . . . . . . . . . . . . . . . . . 628
Danger . . . . . . . . . . . . . . . . . . . . . 628
Duct . . . . . . . . . . . . . . . . . . . . . . . 541
Electrical Tape (Black, Colors, Phase) . 541
Foil . . . . . . . . . . . . . . . . . . . . . . . . 542
Masking . . . . . . . . . . . . . . . . . . . . . 542
Packaging . . . . . . . . . . . . . . . . . . . 542
Teflon . . . . . . . . . . . . . . . . . . . . . . 542
Taps . . . . . . . . . . . . . . . . . . . . . . 300-301
Tarps . . . . . . . . . . . . . . . . . . . . 538, 592
Tarps, Roof Leak Diverter . . . . . . 540
TC Bolt Installation Tools - Tone 18
TC Bolts . . . . . . . . . . . . . . . . . . . . . . 18
te hammer . . . . . (see Rotary Hammers)
Technical Sales Division . . . . . . . 169
TECHNICAL REFERENCE Bolting Basics . . . . . . . . . . . . . . . . . 17
Bolting Dimensions For Flanges . . . . 23
Grade 2, 5, & 8 Finished Hex Nut
Dimensions . . . . . . . . . . . . . . . . . . . 30
Heavy Hex Nut Dimensions . . . . . . . 31
Hex Nut Specifications . . . . . . . . . . . 30
Jam Nut Dimensions . . . . . . . . . . . . 30
Mechanical Anchors At-A-Glance . 66-67
Metric Specifications . . . . . . . . . . 60-61
Tee - Nuts . . . . . . . . . . . . . . . . . . . . . 33
Teflon TAPE . . . . . . . . . . . . . . . . . . 542
TEK Drivers . . . . . . . . . . . . . . . 313-314
Teks / Self Drilling . . . . . . see Screws
temporary lighting & power . 527-529
Temp-Gun, Laser, M12 . . . . . . . . . . 272
Tenso Chain . . . . . . . . . . . . . . . . . . 574
Test Instruments . . 271-273, 401-406
T-Grid Box Hanger . . . . . . . . . . . . 163
T-Head Bolts with Nuts
ASTM A-242 (Corten) . . . . . . 52, 243
Thermal Hanger Shields . . . . . . . 204
Thimbles, wire rope . . . . . . . . . . . 572
Thread Cutting Oil . . . . . . . . . . . . 407
Tools
T
Thread Repair Inserts . . . . . . . . . . 56
THREADED ROD . . . . . . . . . . 171-178
ASTM-A193 B7 . . . . . . . . . . . . . . . 173
Low Carbon . . . . . . . . . . . . . . . 172-173
Fiberglass Threaded Rod . . . . . . . . 151
Slip-On Lock Nuts . . . . . . . 31,134, 173
Stainless Steel, Type 304-316 . . . . 173
Threaded Rod & Studs . . . . 81, 171-178
Threaded Rod & Studs . . . . . 171-178
Threaded Studs . . . . . . . . 81,171-178
Threaders / Groovers . . . . . . 408-417
Threading Die Heads & Dies . . . 412-413
Threading Stands . . . . . . . . . . . . . 410
3M Respirators . . . . . . . . . . . . 612-613
Thumb Screws . . . . . . . . . . . . . . . . . 51
tie bolts, Corporation Eye . . 52, 243
Tie Rods . . . . . . . . . . . . . . . . . . . . . 177
Tie Strap Holder . . . . . . . . . . . . . . 113
Tie Wire accessories . . . . . . . . . . 124
Tie Wire Anchors . . . . . . 82, 106, 124
Tie wraps . . . . . . . . . . . . . . . . . . . . 541
TILLMAN™ Gloves . . . . . . . . . . . 614-617
Tilt Trucks (carts) . . . . . . . . . . . . 548
Tin Snips . . . . . . . . . . . . . . . . . . . . . 444
Toggle Bolt . . . . . . . . . . . . . . . . . . 106
Tie-Wire Acoustical Toggle . . . . . . . 106
Toggle Wings . . . . . . . . . . . . . . . . . 106
Toggler Hollow Wall Anchors . . . . . 106
Tolco . . . . . . . . . . . . . . . . . see Hangers
Tolco Siesmic Bracing . . . . . 226-229
TONE TC Bolt Installation Tools . . 18
Tongue & Groove Pliers . . . . . . . 457
Tool Bags . . . . . . . . . . . . . . . . . . . 457
Tool Belt . . . . . . . . . . . . . . . . . . . . 457
TOOLS . . . . . . . . . . . . . . . . . . 245-458
High Voltage . . . . . . . . . . . . . . 620-622
Tooth Lock Washers . . . . . . . . . . 38
Top Hat Pin . . . . . . . . . . . . . . . . . . 121
Top Lock Cone Nut . . . . . . . . . . . . 135
Top Lock Nuts Grade C . . . . . . . . . 33
Torque Wrench . . . . . . . . . . . 442-454
Torx® Bits . . . . . . . . . . . . . . . . . 10, 315
TPI
Industrial Floor Fan . . . . . . . . . . . . 562
Industrial Air Circulator . . . . . . . . . 562
Portable Blowers . . . . . . . . . . . . . . 562
Track Pins . . . . . . . . . . . . . . . . . . . 121
Tradesman™ Pipe Jack Stands . . 426
Traffic Cones . . . . . . . . . . . . . . . . 628
Traffic signs . . . . . . . . . . . . . . . . . 628
Trak-It Tools & Accessories . 114-117
C3 & C4 . . . . . . . . . . . . . . . . . 114-117
Pole Tools . . . . . . . . . . . . . . . . . . . 114
Fuel Cells . . . . . . . . . . . . . 114, 116-117
Pins . . . . . . . . . . . . . . . . . 114 116-117
TrakFast (Gas) . . . . . . . . . . . . . . . . 117
Transport chain . . . . . . . . . . . . . . 574
Trash Bags . . . . . . . . . . . . . . . 549, 592
Trash cans . . . . . . . . . . . . . . . . . . . 549
Trash Pumps . . . . . . . . . . . . . . . . . 559
TRI-FLOW Lubricant . . . . . . . . . . . . 555
Triggerfoam™ . . . . . . . . . . . . . . . . . 81
Trim Head Self Drilling Screws . . . 6
Trim Head Sharp Point . . . . . . . . . . 6
Tripod, Confined Space . . . . . . . . 606
Tripod Step Ladder . . . . . . . . . . . 524
Tri-Stand Chain Vise . . . . . . . . . . . 424
Trolley . . . . . . . . . . . . . . . . . . . . . . 578
Trough . . . . . . . . . . . . . . . . . . . . . . 185
Trubolt Wedge Anchors . . . . . 71, 83
TRUE TEMPER®
ABS Scoop . . . . . . . . . . . . . . . . . . 564
Bars, Punches & Pins . . . . . . . . . . . 565
Double Face Sledge Hammers . . . . 565
Hand Drill Hammer . . . . . . . . . . . . 565
Post Hole Digger Bar w/ Tamper Top 565
Shovels . . . . . . . . . . . . . . . . . . . . . 564
Truss - Low Profile . . . . . . . . . . . . 4
Punch & Die Sets . . . . . . . . . . . . . . 369
Tsurumi Pumps . . . . . . . . . . . . . . . 559
Abrasives
STRUT . . . . . . . . . . . . . . . (continued)
Electrical Accessories . . . . . . . . . 133
EMT Strut Clamp . . . . . . . . . . . . 140
Knock Out Strut . . . . . . . . . . 132-133
Porcelain Clamps . . . . . . . . . 139-140
Ridgid Strut Clamps . . . . . . . . . . 140
Strut Joiners . . . . . . . . . . . . . . . 136
Universal Strut Clamp . . . . . . . . . 140
Fiberglass Strut
Beam Clamps . . . . . . . . . . . . . . . 151
Channel . . . . . . . . . . . . . . . . . . . 150
Channel Nuts . . . . . . . . . . . . . . . 151
Clevis Hangers . . . . . . . . . . . . . . 151
Hardware . . . . . . . . . . . . . . . 150-151
Strut Pipe Clamps . . . . . . . . . . . 151
Threaded Rod . . . . . . . . . . . . . . 151
Junior Channel (Mini-Strut) . . . . . . . 133
Mechanical Accessories
Beam Clamps . . . . . . . . . . . . . . . 138
Hydrazorbs/Cush-A-Clamp . . . . . 141
Klo-Shure . . . . . . . . . . . . . . 142, 212
Pipe Brackets . . . . . . . . . . . . . . . 137
Pipe Clamps . . . . . . . . . . . . . . . . 140
Pipe Rollers . . . . . . . . . . . . . . . . . . . . 137
Power Wrap . . . . . . . . . . . . . . . . 140
Rooftop Supports
. . . . . . . . . . 155, 198-199, 236-242
Universal Strut Clamp . . . . . . . . . 140
Knock-out Strut . . . . . . . . . . . . 132-133
Slick Nut for Strut . . . . . . . . . . . . . 135
Slotted Angle . . . . . . . . . . . . . . . . . 132
Spring Nut for Strut . . . . . . . . . . . . 135
Top Grip Nut for Strut . . . . . . . . . . 135
Twirl Nut for Strut . . . . . . . . . . . . . 135
Strut assembly & cutting services
. . . . . . . . . . . . . . . . . . Preface B
strut catcher . . . . . . . . . . . . . . . . 143
Strut Clamps / clips . . . . 140-141, 151
Strut Fittings & Accessories . 136-139
Strut Quick Reference . . . . . . . . 125
Strut Strap / clip . . . . . . . . . . . . . 140
Strut support grids . . . . . . Preface B
Strut Systems . . . . . . . . . . . . . . . . 126
Strut-Channel . . . . . . . . . . . . . 128-133
Stud Finder, M12 . . . . . . . . . . . . . 271
Stud Guard . . . . . . . . . . . . . . . . . . 213
Stud Nut Regular, with Stud . . 135
Stud Punches . . . . . . . . . . . . . . . . 374
Stud Welding . . . . . . . . . . . . . . . . . 19
Studs . . . . . . . . . . . . . . . . . . . . 174-178
Sub-Scanner, M12 . . . . . . . . . . . . . 271
Submersible Pumps . . . . . . . . . . . 559
Suction Hose . . . . . . . . . . . . . . . . . 560
SUMNER
“Return” Line J-Hook . . . . . . . . . . . 218
2100 Lifts . . . . . . . . . . . . . . . 428, 546
Adjust-A-Fit® . . . . . . . . . . . . . . . . . 427
Adjust-A-Flange® . . . . . . . . . . . . . . 427
Adjust-A-Rolls® . . . . . . . . . . . . . . . 427
Cricket . . . . . . . . . . . . . . . . . . . . . . 427
Flange Pins . . . . . . . . . . . . . . . . . . 427
Grasshopper . . . . . . . . . . . . . . . . . 427
Hi Jacks . . . . . . . . . . . . . . . . . . . . . 426
Lifts . . . . . . . . . . . . . . . . . 428, 546-547
Lo Jacks . . . . . . . . . . . . . . . . . . . . 426
Nail Plate . . . . . . . . . . . . . . . . . . . 213
Original Jack Stand! . . . . . . . . . . . . 426
Pipefix . . . . . . . . . . . . . . . . . . . . . . 213
Posifix . . . . . . . . . . . . . . . . . . . . . . 213
Pro Jack . . . . . . . . . . . . . . . . . . . . 426
Reel Stands . . . . . . . . . . . . . . . 386-388
Roust-A-Bout . . . . . . . . . . . . . . . . . 429
Stakfix . . . . . . . . . . . . . . . . . . . . . . 213
Stud Guard . . . . . . . . . . . . . . . . . . 213
Tee-Head Extension Bar . . . . . . . . . 429
Wire Carts . . . . . . . . . . . . . . . . 386-388
Sump Pumps . . . . . . . . . . . . . . . . . . . . . . 559
Sunswipe Sunscreen Towlettes . . 554
Super Freeze™ Pipe Freezing . . . . 429
Super Sawzall® . . . . . . see Milwaukee
Super Tugger® Cable Puller . . . . 380
Super-Hawg® Drill . . . . . . . . . . . . 296
Superfix Split Ring . . . . . . . . . . . . 217
Superstrut see also Strut . . . 125-139
Surface Conditioning
Backing Pads . . . . . . . . . . 476-477
Surface Conditioning Belts . . . . 475
Surface Conditioning Discs . 476-477
SURFACE SHIELDS
Carpet Shield® . . . . . . . . . . . . . . . . 539
Duct/HVAC Covers . . . . . . . . . . . . . 539
Dust Shield™ Adjustable Poles . . . . 538
Water Shield Reinforced Kraft Paper 539
Zip-Up™ Zipper . . . . . . . . . . . . . . . 538
suspension clips (mickey mouse
ears) . . . . . . . . . . . . . . . . . . . . . . 215
Swaged Bolts . . . . . . . . . . . . . . . . 176
Sway Braces . . . . . . . . . . . . . . . . . . 204
Sweeping Compound . . . . . . . . . . 552
Swivel anchors, sammy . . . . . . 95-96
Swivel Head Shear . . . . . . . . . . . . 360
Synthetic Gloves . . . . . . . . . . 614-617
OnSite
Supply
(continued)
Safety
S
Rentals
index S - T
Fasteners
index T - Z
T
Visors . . . . . . . . . . . . . . . . . . . 610, 622
Vulcan . . . . . . . . . . . see Threaded Rod
(continued)
Anchors
Strut
Tubing Cutters . . . . . . . . . . . 269, 420
Tubing Cutters - Midget . . . . . . . 420
Tuggers . . . . . . . . . . . . . . . . . . 378-381
Turnbuckle Bodies . . . . . . . . 219, 569
Turnbuckles . . . . . . . . . . . . . . . . . 568
Twirl Nut (B-Line Top Lock) . . . . . 135
Twisted Manila Rope . . . . . . 573, 593
Twisted Polypropylene Rope . . . 573
Two Hole Pipe Strap . . . . . . 139, 145
Two Rod Roller . . . . . . . . . . . . . . 190
Two-wheel Trolley . . . . . . . . . . . 139
Tybak® Lanyard . . . . . . . . . . . . . . . 603
Tyvek Suits . . . . . . . . . . . . . . . . . . . 619
TZ Anchors® . . . . . . . . . . . . . . . 68-69
U
Threaded
Rod
Pipe
Hangers
Tools
Abrasives
U Support . . . . . . . . . . . . . . . . 138-139
U-Bolt Beam Clamps . . . . . . . . . . . 137
U-Bolts, special . . . . . . . . . . 176, 218
UFS Beam Clamp . . . . . . . . . . . . . . 197
U-Hank Tie Wire . . . . . . . . . . . . . . . 124
Ultra Cable Feeder . . . . . . . . . . . . 382
Ultra Tugger® Cable Pullers . 378-381
Speed Booster . . . . . . . . . . . . . . . . 382
UNDERGROUND DEVICES INC.
Duct Spacers . . . . . . . . . . . . . . . 153
Non-Metallic Cable Rack . . . . . 152
Underground Socket Clamp
with Washer . . . . . . . . . . . . . . . 243
Uni-bits . . . . . . . . . . . . . . . . . . . . . . 303
UNISTRUT (see also Strut) 125-141, 170
Universal Joints . . . . . . . . . . . . . . 453
Universal 1-PC Strut Clamp
SK Series . . . . . . . . . . . . . . . . . . . 161
Upside-Down Marking Paints
. . . . . . . . . . . . . . . . . . . . . 543, 593
USS Flat Washers . . . . . . . . . . . . . . 36
Utility
Blades, Knife . . . . . . . . . . . . . . . . . 444
Cart - Heavy Duty . . . . . . . . . . . . . 548
Knives . . . . . . . . . . . . . . . . . . 444, 351
Light . . . . . . . . . . . . . . . . . . . . . . . 528
Locators, RIDGID Tool . . . . . . . 437-438
Pumps . . . . . . . . . . . . . . . . . . . . . . 559
Storage boxes . . . . . . . . . . . . . 532-536
UVEX - See Safety Glasses . . . 608-609
U-Washer . . . . . . . . . . . . . . . . . . . . 136
V
OnSite
Supply
Safety
Rentals
V-Head Pipe Stands . . . . . . . . . 425-426
Vacuum Bits . . . . . . . . . . . . . . . . . . 338
Vacuum / Blower Power Fishing
System Model No. 690 . . . . . . . 377
Vacuum Cleaners . . . . . . . . . 261, 557
Van Hanger (Copper-Bell) . . . . . . 219
Vari-Bit® Step Drill Bits . . . . . . . . 303
V-Clevis . . . . . . . . . . . . . . . . . . . . . . 185
V-Clevis Plastic Pipe Hanger . . . . 185
V-Gard® Hard Hats MSA . . . . . 610-611
V-Trough . . . . . . . . . . . . . . . . . . . . 185
Versabar see also Strut . . . 125-141
VERTIGO™
Concrete Vertical Hanger . . . . . 98, 225
Steel Side Hanger . . . . . . . . . . 98, 225
Wood Side Hanger . . . . . . . . . . 98, 225
Vests, Safety . . . . . . . . . . . . . . 629-630
Vibration Isolation Hangers 207, 230
Vibration Mounting Co
(VMC) . . . . . . . . . . . . . . . . . . . . . . 230
Viper . . . . . . . . . . . . . . . . . . . . . . . . 123
Vise-Grip® Clamps, Pliers, Tools 456
Vises . . . . . . . . . . . . . . . . . . . . . . . . 586
654
W
Wafer Lath / K-Lath Self Drilling
Screws . . . . . . . . . . . . . . . . . . . . . . 4
Wafer Lath Sharp Point Screws . . 4
Wafer Plymetal Self Drilling
Screws . . . . . . . . . . . . . . . . . . . . . . 4
Wall Dog™ Anchors . . . . . . . . 15, 107
Wall sleeves . . . . . . . . . . . . . 209, 244
Washer Specifications &
Dimensions . . . . . . . . . . . . . . . . . 37
Washers . . . . . see also Flat Washers
Bonded Sealing . . . . . . . . . . . . . . . . 39
Counter Sunk Finishing - brass . . . . . 55
Counter Sunk Finishing - plated . . . . 39
Dimension Chart . . . . . . . . . . . . . . . 37
Duc Lug . . . . . . . . . . . . . . . . . . . . . . 52
Fender Washer - plated . . . . . . . . . . 36
Fender Washer - Stainless Steel . . . . 39
Flat - Brass . . . . . . . . . . . . . . . . . . . 54
Flat - Grade 8 . . . . . . . . . . . . . . . . . 36
Flat - SAE . . . . . . . . . . . . . . . . . . . . 36
Flat - Stainless Steel . . . . . . . . . 25, 39
Flat - USS . . . . . . . . . . . . . . . . . . . . 36
Hi-Collar Lockwasher . . . . . . . . . . . . 38
Internal-External Lockwashers . . . . . 38
Machine Screw . . . . . . . . . . . . . . . . 39
Metric . . . . . . . . . . . . . . . . . . . . . 60-61
Neoprene . . . . . . . . . . . . . . . . . . . . 39
Split Lock Washers . . . . . . 28-29. 38, 55
Galvanized . . . . . . . . . . . . . . . . . . 38
Grade 8 . . . . . . . . . . . . . . . . . . . . 38
Plated . . . . . . . . . . . . . . . . . . . . . 38
Silicone Bronze . . . . . . . . . . . . . . 55
Stainless Steel . . . . . . . . . . . . . . . 38
Socket Washers . . . . . . . . . . . . . . . . 52
Square Bevel . . . . . . . . . . . . . . . . . . 21
Structural F346 . . . . . . . . . . . . . . . . 21
Wasp & Hornet Killer Plus . . . . . 555
Water coolers . . . . . . . . . . . . . . . 561
Water hose . . . . . . . . . . . . . . . 560-561
Water Shield Reinforced
Kraft Paper . . . . . . . . . . . . . . . . 539
Water Stop Sleeves . . . . . . . 209, 231
WD-40 Lubricant . . . . . . . . . . . . . . 555
Wedge Anchors . . . . . . . . . . . . . 82-83
Wedge-Bolt® Anchors . . . . . . . 72, 88
WEKA Hand Held Core Drill . . . . 338
Weld Beam Attachments . . . . . . . 197
Weld Studs . . . . . . . . . . . . . . . . . . . 19
Welded Steel Bracket . . . . . . . . . 207
Welding carts . . . . . . . . . . . . . . . . 547
Welding gloves . . . . . . . . . . . . . . 614
Welding Goggle . . . . . . . . . . . . . . 609
Welding Jackets . . . . . . . . . . . . . . 622
Welding Respirators . . . . . . . 612-613
Weldless Eye Nuts . . . . . . . . 196, 219
wet core bits (see Diamond Products)
Wet & Dry Vacuums . . . . . . . 261, 557
Filters . . . . . . . . . . . . . . . . . . . . . . 557
Wet Blades - Asphalt,
Asphalt Over Concrete
& Green Concrete . . . 331, 466-467
Wet Blades - Cured Concrete . . 331
Wheelbarrows . . . . . . . . . . . . . . . 566
Tire . . . . . . . . . . . . . . . . . . . . . . . . 566
Whisk Brush . . . . . . . . . . . . . . . . . 551
Wide Flange Purlin Clamp . . . . . 189
Wide Mouth Beam Clamp . . . . . . . 188
Wide Mouth Top Beam Clamp
Malleable Iron . . . . . . . . . . . . 188
WILLIAMS®
B55 Pigtail Anchors, B7S & B8S
Continuous Coil Thread Rod . . . . 171
B7S & B8S Continuous Coil
Thread Rod . . . . . . . . . . . . . . . . 171
Hartford, CT
800-969-0285
Boston , MA
800-645-6155
WILLIAMS® . . . . . . . . . . . . . (continued)
H1F/B25 Coil Hex Nuts . . . . . . . . . 171
High Tensile Steel William® B1S
High Tensile Tie Rods . . . . . . . . . . . 171
WILTON
“0” Series Extra Heavy Duty . . . . . 587
Extra Deep Throat . . . . . . . . . . . . . 587
Mechanics’ Vises . . . . . . . . . . . . . . 586
Spring Clamps . . . . . . . . . . . . . . . . 587
Windex Glass Cleaner . . . . . . . . . 554
Window Beam Clamp . . . . . . . . . . 137
Window Squeegee . . . . . . . . . . . . 552
Wing Nuts . . . . . . . . . . . . . . . 33-34, 55
18-8 Stainless Steel . . . . . . . . . . . . 34
Brass . . . . . . . . . . . . . . . . . . . . . . . . 55
Winter Gloves . . . . . . . . . . . . . . . . 617
Winter Liners . . . . . . . . . . . . . . . . 618
Wipers . . . . . . . . . . . . . . . . . . . . . . 556
Wire
Brushes . . . . . . . . . . . . . . . . . . 483-487
Cart . . . . . . . . . . . . . . . . . . . . . 386-387
Ceiling Wire . . . . . . . . . . . . . . . . . . 124
Dispensers . . . . . . . . . . . . . . . . 386-387
Pipe Hook . . . . . . . . . . . . . . . . . . . 218
Stripper . . . . . . . . . . . . . . . . . . . . . 389
Ties . . . . . . . . . . . . . . . . . . . . . . . . 541
Wire Rope & Accessories . . 571-573
Clamps . . . . . . . . . . . . . . . . . 189, 573
Perimeter Cable . . . . . . . . . . . . . . . 571
Rope . . . . . . . . . . . . . . . . . . . . . . . 572
Sleeves . . . . . . . . . . . . . . . . . . . . . 572
Slings . . . . . . . . . . . . . . . . . . . . . . 580
Thimbles . . . . . . . . . . . . . . . . 189, 572
Wire Wheels see Pferd/Advance Brush
wobblelight . . . . . . . . . . . . . . . . . 528
Wood Screws - Brass . . . . . . . . . . 56
WOOD-KNOCKER™ Inserts . . . . 87, 220
Work bench, mobile . . . . . . . . . . 533
Work Lights . . . 262-263, 289, 527-529
Worm Drive Circular Saw . . . . . . 355
Wrecking bars . . . . . . . . . . . . . . . 565
Wrenches . . . . . . . . . . . . . . . . . 453-455
X
X-Press, Sammy's . . . . . . . . . . . . . . . 96
Z
Zamac
Hammer-Screw® . . . . . . . . . . . . . . . 103
Nailins . . . . . . . . . . . . . . . . . . . 51, 103
Zee-Support . . . . . . . . . . . . . . . . . . 139
zinc-rich cold galvanizing . . . . . 543
Zip Screws . . . . . . . . . . . . . . . . . . . . . 4
Zip ties . . . . . . . . . . . . . . . . . . . . . . 541
Zip-It® Hollow Wall Anchors . . 108
Zip-Up™ Zipper . . . . . . . . . . . . . . . . 538
Zip Wall . . . . . . . . . . . . . . . . . . . . . 538
Washington D.C.
877-419-2755
Philadelphia, PA
610-647-8070
www.GoNefco.com
BOSTON
800-645-6155
281 Newtonville Avenue
Newton, MA 02460
Phone 6617-464-4100
Fax 617-464-0471
HARTFORD
800-969-0285
411 Burnham Street
East Hartford, CT 06108
Phone 860-289-0285
Fax 860-282-1487
PHILADELPHIA
610-647-8070
135 South Whitford Street
Exton, PA 19341
Phone 610-647-8070
Fax 610-524-7387
WASHINGTON, D.C.
877-419-2755
12332 Conway Road
Beltsville, MD 20705
Phone 301-210-6060
Fax 301-419-3019
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2010:11:10 14:41:21-05:00 Creator : Adobe InDesign CS4 (6.0.6) Modify Date : 2010:11:11 15:53:06-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Metadata Date : 2010:11:11 15:53:06-05:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 14468 bytes, use -b option to extract) Instance ID : uuid:eebea932-6625-3045-bfd8-c683f67768c0 Document ID : xmp.did:FB7F117407206811BD1FD5DD07D730DF Original Document ID : adobe:docid:indd:3908b4b8-117a-11de-a714-bf05d546f79d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FA7F117407206811BD1FD5DD07D730DF Derived From Document ID : xmp.did:9F1F93D80D206811AD66F9A2A6B21FA5 Derived From Original Document ID: adobe:docid:indd:3908b4b8-117a-11de-a714-bf05d546f79d Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:CBA66C0942206811A58DD269CCBD5DF5, xmp.iid:CCA66C0942206811A58DD269CCBD5DF5, xmp.iid:7A1353042D206811902780BC8F35920D, xmp.iid:7B1353042D206811902780BC8F35920D, xmp.iid:0180117407206811B644950D618E691C, xmp.iid:0280117407206811B644950D618E691C, xmp.iid:F77F11740720681186B88855052B89C5, xmp.iid:F87F11740720681186B88855052B89C5, xmp.iid:F97F11740720681186B88855052B89C5, xmp.iid:FA7F11740720681186B88855052B89C5, xmp.iid:0280117407206811B0E69C505B7AFB71, xmp.iid:FB7F11740720681187E4F367F6B99152, xmp.iid:FC7F11740720681187E4F367F6B99152, xmp.iid:0A80117407206811A525BDC011C295B5, xmp.iid:FE7F117407206811AD66F9A2A6B21FA5, xmp.iid:FF7F117407206811AD66F9A2A6B21FA5, xmp.iid:0080117407206811AD66F9A2A6B21FA5, xmp.iid:9C1F93D80D206811AD66F9A2A6B21FA5, xmp.iid:9D1F93D80D206811AD66F9A2A6B21FA5, xmp.iid:9E1F93D80D206811AD66F9A2A6B21FA5, xmp.iid:9F1F93D80D206811AD66F9A2A6B21FA5, xmp.iid:A01F93D80D206811AD66F9A2A6B21FA5, xmp.iid:7FA5DF011E206811AF25A2A4C96DA13C, xmp.iid:FA7F117407206811B0BBA6439A98D6BA, xmp.iid:FB7F117407206811B0BBA6439A98D6BA, xmp.iid:2CB0C3990B206811B0BBA6439A98D6BA, xmp.iid:2DB0C3990B206811B0BBA6439A98D6BA, xmp.iid:F77F117407206811BF32C9544028BD25, xmp.iid:F87F117407206811BF32C9544028BD25, xmp.iid:4FC8E36319206811BF32C9544028BD25, xmp.iid:E4C313D509206811BD908EE008E5430E, xmp.iid:FC8B0C9714206811BD908EE008E5430E, xmp.iid:F97F117407206811B7D0A85A87188786, xmp.iid:F97F117407206811BD1FD5DD07D730DF, xmp.iid:FA7F117407206811BD1FD5DD07D730DF, xmp.iid:FB7F117407206811BD1FD5DD07D730DF History When : 2009:07:17 15:23:57-04:00, 2009:07:17 15:23:57-04:00, 2009:10:02 13:23:45-04:00, 2009:10:02 13:23:46-04:00, 2009:10:02 13:39:25-04:00, 2009:10:02 13:39:25-04:00, 2009:10:02 14:30:38-04:00, 2009:10:02 14:42:09-04:00, 2009:10:02 14:42:09-04:00, 2009:10:02 14:51:44-04:00, 2009:10:02 15:26:27-04:00, 2010:05:17 15:01:15-04:00, 2010:05:17 15:02:31-04:00, 2010:05:18 13:10:36-04:00, 2010:06:18 08:04:25-04:00, 2010:06:18 08:12:45-04:00, 2010:06:18 08:12:45-04:00, 2010:06:18 08:23:53-04:00, 2010:06:18 08:26:54-04:00, 2010:06:18 08:27:43-04:00, 2010:06:18 08:27:43-04:00, 2010:06:18 08:29:20-04:00, 2010:08:24 11:07:10-04:00, 2010:08:25 10:53:10-04:00, 2010:08:25 10:53:20-04:00, 2010:08:25 15:30:49-04:00, 2010:08:25 15:32:01-04:00, 2010:08:27 09:02:57-04:00, 2010:08:27 09:23:57-04:00, 2010:08:27 11:43:16-04:00, 2010:08:30 08:56:29-04:00, 2010:08:30 09:19:59-04:00, 2010:08:30 13:54:55-04:00, 2010:11:10 13:20:40-05:00, 2010:11:10 13:22:19-05:00, 2010:11:10 13:22:19-05:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /, /metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 304.80, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 2400.00, 350.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 300.00, 350.00, 350.00, 300.00, 300.00, 350.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 300.00, 300.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 350.00, 350.00, 300.00, 300.00, 300.00, 299.99, 300.00, 300.00, 350.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.03, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 305.23, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 305.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.80, 2400.00, 300.00, 304.00, 304.79, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 304.80, 300.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 300.00, 300.00, 299.99, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 600.00, 300.00, 600.00, 300.00, 600.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.80, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 144.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 150.11, 144.00, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.73, 300.00, 144.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 305.19, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 1200.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 1200.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 304.80, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 2400.00, 350.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 350.00, 300.00, 350.00, 350.00, 300.00, 300.00, 350.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 300.00, 300.00, 350.00, 350.00, 300.00, 350.00, 350.00, 350.00, 350.00, 350.00, 300.00, 300.00, 300.00, 299.99, 300.00, 300.00, 350.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.03, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 305.23, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 305.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.80, 2400.00, 300.00, 304.00, 304.79, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 304.80, 300.00, 1200.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 299.99, 300.00, 300.00, 299.99, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 600.00, 300.00, 600.00, 300.00, 600.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.80, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 2400.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 144.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 150.11, 144.00, 299.99, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 304.73, 300.00, 144.00, 300.00, 300.00, 300.00, 1200.00, 1200.00, 1200.00, 1200.00, 300.00, 305.19, 300.00, 1200.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 1200.00, 300.00, 1200.00, 300.00, 1200.00, 300.00, 300.00, 1200.00, 1200.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:E3F40ED92C2068118DBBB9D218702192, xmp.iid:0A80117407206811AAA3D381391540DB, uuid:3235ca87-8c94-11d8-90f7-d1f422b54ad6, uuid:cd0f4d52-8c92-11d8-90f7-d1f422b54ad6, uuid:63bb1984-8c94-11d8-90f7-d1f422b54ad6, uuid:4afa3db3-92c7-11d8-a8d7-b0728ce7167e, xmp.iid:F77F117407206811B787C32755CC39EC, uuid:d945ca08-d10f-11d8-9775-a7edda0b3b83, uuid:acac4710-9f68-11d8-91bc-fc88b2a3a04a, uuid:2b48ce03-92c7-11d8-a8d7-b0728ce7167e, uuid:0d5a1d6b-92c7-11d8-a8d7-b0728ce7167e, uuid:cfe95afb-92c6-11d8-a8d7-b0728ce7167e, uuid:4dc6721f-d10f-11d8-8946-e7c216a924e1, xmp.iid:01801174072068118669D32E75F5E010, uuid:62cab8af-7e91-11d8-b8bb-e2e251670bc1, xmp.iid:0A80117407206811AAA3D381391540DB, xmp.iid:FA7F117407206811B787C32755CC39EC, xmp.iid:F97F117407206811B787C32755CC39EC, xmp.iid:FB7F117407206811B787C32755CC39EC, xmp.iid:F87F117407206811B787C32755CC39EC, uuid:0ac9a6c8-23eb-11dd-82b0-b4b0a6ec165a, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:095a5500-16c5-11dd-a5b4-efb4f467ed13, uuid:7f298533-16c5-11dd-a5b4-efb4f467ed13, uuid:7abf1876-8cac-11d8-90f7-d1f422b54ad6, uuid:90c4be0f-8cb4-11d8-90f7-d1f422b54ad6, uuid:a4a4035f-a8c7-11d8-a2b5-e13b76e29dea, uuid:0ee7c3f2-0d5b-11dd-a9c0-a8dd2a442e10, uuid:5677e35b-12d6-11dd-a5ac-a848d52ca593, uuid:c5f60dbb-a8d3-11d8-a2b5-e13b76e29dea, uuid:cdd66052-1853-11dd-b1ec-958adbe68c88, xmp.iid:FC7F117407206811B787C32755CC39EC, xmp.iid:FD7F117407206811B787C32755CC39EC, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0ee7c3f2-0d5b-11dd-a9c0-a8dd2a442e10, uuid:ff4757f1-169a-11dd-8d3b-b2cafb99f074, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:ff4757f1-169a-11dd-8d3b-b2cafb99f074, uuid:e6e456ea-169e-11dd-8d3b-b2cafb99f074, uuid:e6e456ea-169e-11dd-8d3b-b2cafb99f074, uuid:ff4757f1-169a-11dd-8d3b-b2cafb99f074, uuid:d0c73390-16a1-11dd-8d3b-b2cafb99f074, uuid:d0c73390-16a1-11dd-8d3b-b2cafb99f074, uuid:f25eeadd-1699-11dd-8d3b-b2cafb99f074, uuid:f25eeadd-1699-11dd-8d3b-b2cafb99f074, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e6e456ef-169e-11dd-8d3b-b2cafb99f074, uuid:e6e456f3-169e-11dd-8d3b-b2cafb99f074, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:ac148110-16c8-11dd-a5b4-efb4f467ed13, uuid:ba8fae46-16be-11dd-a5b4-efb4f467ed13, xmp.iid:F77F117407206811AB858C605BEF1DD4, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:15574b52-16bd-11dd-a5b4-efb4f467ed13, uuid:d0c73394-16a1-11dd-8d3b-b2cafb99f074, uuid:ac148114-16c8-11dd-a5b4-efb4f467ed13, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:f470836f-16c8-11dd-a5b4-efb4f467ed13, uuid:e38727fd-16bd-11dd-a5b4-efb4f467ed13, uuid:370d8ded-16c9-11dd-a5b4-efb4f467ed13, uuid:93069cc3-16bd-11dd-a5b4-efb4f467ed13, uuid:5b99abb6-16bd-11dd-a5b4-efb4f467ed13, uuid:93069cbf-16bd-11dd-a5b4-efb4f467ed13, uuid:5b99abb2-16bd-11dd-a5b4-efb4f467ed13, uuid:9e26952e-0d77-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:54d172ca-1db8-11dd-a738-9e23a1e1f261, uuid:03e4a281-1db8-11dd-a738-9e23a1e1f261, uuid:54d172c6-1db8-11dd-a738-9e23a1e1f261, uuid:03e4a27b-1db8-11dd-a738-9e23a1e1f261, uuid:03e4a27b-1db8-11dd-a738-9e23a1e1f261, uuid:33d0ac1f-16c0-11dd-a5b4-efb4f467ed13, uuid:9e269532-0d77-11dd-a9c0-a8dd2a442e10, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:a1774ff7-0706-11dd-ae8e-91d617051c1e, uuid:f7c21f75-0702-11dd-ae8e-91d617051c1e, uuid:f7c21f7a-0702-11dd-ae8e-91d617051c1e, uuid:ea644a68-0704-11dd-ae8e-91d617051c1e, uuid:b749185a-0705-11dd-ae8e-91d617051c1e, uuid:b749185f-0705-11dd-ae8e-91d617051c1e, uuid:ea644a62-0704-11dd-ae8e-91d617051c1e, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:DF960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:DC960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:DE960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:DD960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:DA960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:DB960ECD08206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:0A860F7309206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:107EE7260E206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:52f1d878-7d81-11dc-9e03-cb5856fd8286, xmp.iid:0B860F7309206811B787C32755CC39EC, xmp.iid:E1960ECD08206811B787C32755CC39EC, xmp.iid:E0960ECD08206811B787C32755CC39EC, xmp.iid:E2960ECD08206811B787C32755CC39EC, xmp.iid:D9960ECD08206811B787C32755CC39EC, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:b49cff29-7cc8-11dc-9e4b-f06a8a2dd257, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:77dbf1a5-a582-11dc-bd1e-907773d0b13c, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:FF7F117407206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:018011740720681185538949193C7FE0, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:f147b923-0d7b-11dd-a9c0-a8dd2a442e10, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:e3a83711-7dc4-11dc-ba00-f7cc96a826aa, xmp.iid:FE7F117407206811B787C32755CC39EC, xmp.iid:6A5D668428206811A110EF2FA505F80B, xmp.iid:2B3C22E738206811A110EF2FA505F80B, xmp.iid:FC7F11740720681186E0904F47EAA708, xmp.iid:FF7F11740720681186E0904F47EAA708, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5072c196-71ce-11dc-9946-d22ee3065e75, uuid:5072c19d-71ce-11dc-9946-d22ee3065e75, uuid:d71fb67f-71ce-11dc-9946-d22ee3065e75, uuid:df875a77-7262-11dc-99c5-f7b8015dbf23, uuid:df699283-7265-11dc-99c5-f7b8015dbf23, uuid:5072c196-71ce-11dc-9946-d22ee3065e75, uuid:df699283-7265-11dc-99c5-f7b8015dbf23, uuid:5072c19d-71ce-11dc-9946-d22ee3065e75, uuid:df875a77-7262-11dc-99c5-f7b8015dbf23, uuid:d71fb67f-71ce-11dc-9946-d22ee3065e75, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:20758d17-726d-11dc-99c5-f7b8015dbf23, uuid:f80a25b3-726d-11dc-99c5-f7b8015dbf23, xmp.iid:0480117407206811900280811F259D21, xmp.iid:048011740720681195FEE3ACEB3419BA, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:3b0ac665-0e3b-11dd-9c81-d06931e3a249, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0080117407206811B787C32755CC39EC, xmp.iid:D8960ECD08206811B787C32755CC39EC, xmp.iid:D8960ECD08206811B787C32755CC39EC, uuid:ed787532-177f-11dd-a88e-ed1ccf31c813, uuid:d31fb95c-1446-11dd-9985-da96dce52c6b, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:c5b146b3-0d45-11dd-a9c0-a8dd2a442e10, uuid:c5b146b6-0d45-11dd-a9c0-a8dd2a442e10, uuid:c5b146b3-0d45-11dd-a9c0-a8dd2a442e10, uuid:c5b146b6-0d45-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0380117407206811B13FD06576BB6D5B, uuid:7e20e509-0c99-11dd-bdbb-825daba41736, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:7e20e50f-0c99-11dd-bdbb-825daba41736, uuid:23b3cdb2-0ca7-11dd-bdbb-825daba41736, uuid:23b3cdad-0ca7-11dd-bdbb-825daba41736, uuid:abdb4686-0ca7-11dd-bdbb-825daba41736, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:49d4f042-175e-11dd-a88e-ed1ccf31c813, uuid:c0be1385-175e-11dd-a88e-ed1ccf31c813, xmp.iid:0380117407206811B13FD06576BB6D5B, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:01b3b5fa-8c99-11d8-90f7-d1f422b54ad6, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0280117407206811B13FD06576BB6D5B, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:ddd64ad0-c3b4-11d8-803e-96c909aba39a, uuid:ddd64ad0-c3b4-11d8-803e-96c909aba39a, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:7d21961c-fb53-11dd-b000-937ba47f8918, uuid:1102d006-0038-11de-8e90-af31c3ff404f, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:FA3FEF0A3720681190ADFD406050452D, xmp.iid:0780117407206811B13FD06576BB6D5B, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:7a8c7f72-169a-11dd-8d3b-b2cafb99f074, uuid:ddd64ad0-c3b4-11d8-803e-96c909aba39a, uuid:ddd64ad0-c3b4-11d8-803e-96c909aba39a, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, uuid:dd5a490a-fb61-11dd-b000-937ba47f8918, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:FF7F117407206811AB1495435AFD43C8, xmp.iid:9F57FBE90A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df0fb330-a99b-11d8-8205-d59e6670a055, uuid:b0a3939c-16c4-11dd-a5b4-efb4f467ed13, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:c203e710-0e4b-11dd-9c81-d06931e3a249, uuid:c203e718-0e4b-11dd-9c81-d06931e3a249, uuid:c203e714-0e4b-11dd-9c81-d06931e3a249, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:9E57FBE90A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:9D57FBE90A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:3f37681f-169a-11dd-8d3b-b2cafb99f074, xmp.iid:57D65EFA22206811A1DBFA7B5C9DFFD0, uuid:3074d95d-fb3e-11dc-a90b-eaf55cdece55, xmp.iid:FF7F1174072068119D88BBA62C0F9223, uuid:619be47e-0083-11dc-9ac5-94316fee6bf9, uuid:3074d95d-fb3e-11dc-a90b-eaf55cdece55, xmp.iid:8BCBEFA5152068119D88BBA62C0F9223, xmp.iid:57D65EFA22206811A1DBFA7B5C9DFFD0, xmp.iid:8F40152515206811AA3DB05B8E37899D, xmp.iid:57D65EFA22206811A1DBFA7B5C9DFFD0, xmp.iid:57D65EFA22206811A1DBFA7B5C9DFFD0, uuid:65481c79-819f-11dd-bca0-adf27e6c8ab9, xmp.iid:57D65EFA22206811A1DBFA7B5C9DFFD0, uuid:619be47e-0083-11dc-9ac5-94316fee6bf9, uuid:619be47e-0083-11dc-9ac5-94316fee6bf9, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:3448f7e0-0bda-11dd-b0d7-f6e88b9f4d0d, uuid:3448f7e4-0bda-11dd-b0d7-f6e88b9f4d0d, xmp.iid:10860F7309206811B787C32755CC39EC, uuid:e2bb43fb-0d5b-11dd-a9c0-a8dd2a442e10, uuid:b0a3939c-16c4-11dd-a5b4-efb4f467ed13, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:62cab8ab-7e91-11d8-b8bb-e2e251670bc1, uuid:62cab8af-7e91-11d8-b8bb-e2e251670bc1, uuid:c95141ec-7e91-11d8-b8bb-e2e251670bc1, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5d1f5b3f-7e93-11d8-b8bb-e2e251670bc1, uuid:7d300d01-7e92-11d8-b8bb-e2e251670bc1, uuid:a3a59388-7e93-11d8-b8bb-e2e251670bc1, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:62cab8af-7e91-11d8-b8bb-e2e251670bc1, uuid:b5558765-1699-11dd-8d3b-b2cafb99f074, uuid:b5558761-1699-11dd-8d3b-b2cafb99f074, uuid:cf55f042-16c6-11dd-a5b4-efb4f467ed13, uuid:5c3b2146-1699-11dd-8d3b-b2cafb99f074, uuid:5c3b2146-1699-11dd-8d3b-b2cafb99f074, uuid:a5c305e1-7e95-11d8-b8bb-e2e251670bc1, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:1ee5846a-7e96-11d8-b8bb-e2e251670bc1, uuid:7248513b-16c4-11dd-a5b4-efb4f467ed13, uuid:315101de-16c4-11dd-a5b4-efb4f467ed13, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0980117407206811B13FD06576BB6D5B, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:9e66cc24-0d38-11dd-a9c0-a8dd2a442e10, uuid:9e66cc28-0d38-11dd-a9c0-a8dd2a442e10, uuid:9dfd2f3b-0d39-11dd-a9c0-a8dd2a442e10, uuid:9e66cc28-0d38-11dd-a9c0-a8dd2a442e10, uuid:9dfd2f3b-0d39-11dd-a9c0-a8dd2a442e10, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:095a54fa-16c5-11dd-a5b4-efb4f467ed13, uuid:16af00a3-7e9e-11d8-b8bb-e2e251670bc1, uuid:0b58df5d-7ea0-11d8-b8bb-e2e251670bc1, uuid:0b58df61-7ea0-11d8-b8bb-e2e251670bc1, uuid:095a54fa-16c5-11dd-a5b4-efb4f467ed13, uuid:7f298537-16c5-11dd-a5b4-efb4f467ed13, uuid:3f376823-169a-11dd-8d3b-b2cafb99f074, uuid:7248513f-16c4-11dd-a5b4-efb4f467ed13, uuid:0bc4673f-16c7-11dd-a5b4-efb4f467ed13, uuid:095a5500-16c5-11dd-a5b4-efb4f467ed13, uuid:7f298533-16c5-11dd-a5b4-efb4f467ed13, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:cf55f04a-16c6-11dd-a5b4-efb4f467ed13, uuid:cf55f046-16c6-11dd-a5b4-efb4f467ed13, uuid:72485143-16c4-11dd-a5b4-efb4f467ed13, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:14860F7309206811B787C32755CC39EC, xmp.iid:13860F7309206811B787C32755CC39EC, xmp.iid:9B57FBE90A206811B787C32755CC39EC, xmp.iid:9C57FBE90A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F73D886D0A206811B787C32755CC39EC, xmp.iid:F43D886D0A206811B787C32755CC39EC, xmp.iid:F63D886D0A206811B787C32755CC39EC, xmp.iid:F23D886D0A206811B787C32755CC39EC, xmp.iid:F93D886D0A206811B787C32755CC39EC, xmp.iid:9857FBE90A206811B787C32755CC39EC, xmp.iid:FA3D886D0A206811B787C32755CC39EC, xmp.iid:FC3D886D0A206811B787C32755CC39EC, xmp.iid:F83D886D0A206811B787C32755CC39EC, xmp.iid:FB3D886D0A206811B787C32755CC39EC, xmp.iid:F53D886D0A206811B787C32755CC39EC, xmp.iid:F33D886D0A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:CB79742A16206811B92E9F118B142CC8, xmp.iid:0C860F7309206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:CD79742A16206811B92E9F118B142CC8, xmp.iid:CF79742A16206811B92E9F118B142CC8, xmp.iid:D179742A16206811B92E9F118B142CC8, xmp.iid:224FED7E3C206811A32EDC59C2C610DE, xmp.iid:D379742A16206811B92E9F118B142CC8, xmp.iid:11860F7309206811B787C32755CC39EC, xmp.iid:78CDA0C521206811B92E9F118B142CC8, xmp.iid:9A57FBE90A206811B787C32755CC39EC, xmp.iid:0E860F7309206811B787C32755CC39EC, xmp.iid:7CCDA0C521206811B92E9F118B142CC8, xmp.iid:7ECDA0C521206811B92E9F118B142CC8, xmp.iid:12860F7309206811B787C32755CC39EC, xmp.iid:9957FBE90A206811B787C32755CC39EC, xmp.iid:0F860F7309206811B787C32755CC39EC, xmp.iid:0B480DC023206811B92E9F118B142CC8, xmp.iid:0D860F7309206811B787C32755CC39EC, xmp.iid:0F480DC023206811B92E9F118B142CC8, xmp.iid:F2FC690B37206811B92E9F118B142CC8, uuid:c5f60dbb-a8d3-11d8-a2b5-e13b76e29dea, uuid:00c68cc8-1c43-11dd-bc28-d80b581f5020, uuid:00c68cc2-1c43-11dd-bc28-d80b581f5020, uuid:00c68cc5-1c43-11dd-bc28-d80b581f5020, uuid:4d2c6d1e-1c43-11dd-bc28-d80b581f5020, uuid:00c68cbf-1c43-11dd-bc28-d80b581f5020, uuid:1b60af91-1c3d-11dd-bc28-d80b581f5020, uuid:4d2c6d21-1c43-11dd-bc28-d80b581f5020, uuid:7f53c332-1c27-11dd-bf4f-e4035d312cd1, xmp.iid:A157FBE90A206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:c152031a-7fbe-11dc-b2e7-da55fa350790, xmp.iid:DCDA3E8C0E206811B787C32755CC39EC, uuid:005740ab-99cf-11dc-aa6b-d56a1cec0f90, uuid:2d1477c9-8ede-11dc-9cda-e9a86ea32fcc, uuid:c9a3bb07-99cf-11dc-aa6b-d56a1cec0f90, xmp.iid:BDDB2B9C3520681190ADFD406050452D, xmp.iid:0A80117407206811B13FD06576BB6D5B, uuid:9a90d97e-99ce-11dc-aa6b-d56a1cec0f90, uuid:6fd8141d-9908-11dc-ae71-8620d0e90946, uuid:6bae7f6f-990a-11dc-ae71-8620d0e90946, uuid:005740af-99cf-11dc-aa6b-d56a1cec0f90, uuid:6bf8dc2a-99cf-11dc-aa6b-d56a1cec0f90, uuid:6bf8dc26-99cf-11dc-aa6b-d56a1cec0f90, uuid:2512a85f-99cb-11dc-aa6b-d56a1cec0f90, xmp.iid:D7DA3E8C0E206811B787C32755CC39EC, uuid:903fa16f-99ca-11dc-aa6b-d56a1cec0f90, uuid:2512a85b-99cb-11dc-aa6b-d56a1cec0f90, uuid:1e4bb82d-7271-11dc-99c5-f7b8015dbf23, uuid:9aea0959-98d8-11dc-ae71-8620d0e90946, uuid:9a90d982-99ce-11dc-aa6b-d56a1cec0f90, uuid:f6967ee4-047a-11dd-9b17-dab7ec7431e8, uuid:2512a863-99cb-11dc-aa6b-d56a1cec0f90, uuid:2475aadc-99d0-11dc-aa6b-d56a1cec0f90, uuid:78e59a9b-7296-11dc-99c5-f7b8015dbf23, uuid:9aea0959-98d8-11dc-ae71-8620d0e90946, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:78e59a9b-7296-11dc-99c5-f7b8015dbf23, uuid:1e4bb82d-7271-11dc-99c5-f7b8015dbf23, uuid:5072c196-71ce-11dc-9946-d22ee3065e75, uuid:5072c19d-71ce-11dc-9946-d22ee3065e75, uuid:d71fb67f-71ce-11dc-9946-d22ee3065e75, uuid:a213407d-9ffe-11dc-bd93-acc6a3943456, xmp.iid:A057FBE90A206811B787C32755CC39EC, uuid:3b3d0d9f-824e-11dc-9639-aa18168df8ab, uuid:e70ae1b3-8fab-11dc-82b2-89a50880acec, uuid:2d1477c9-8ede-11dc-9cda-e9a86ea32fcc, uuid:3bf5ccd5-9039-11dc-bcb6-dbda147b7ba1, uuid:3bf5ccdc-9039-11dc-bcb6-dbda147b7ba1, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F87F11740720681189A0EF4C18321F8E, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:26fc5d81-139a-11de-aaf6-e2111246c2d1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:26fc5d81-139a-11de-aaf6-e2111246c2d1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F11740720681189A0EF4C18321F8E, xmp.iid:BFDB2B9C3520681190ADFD406050452D, xmp.iid:F97F1174072068118DBBFEA1B8DF2CE7, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:26fc5d81-139a-11de-aaf6-e2111246c2d1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:26fc5d81-139a-11de-aaf6-e2111246c2d1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BCDE8ECA22971807, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:ef062a40-15fa-11de-9f44-fc5a211a0338, xmp.iid:D6DA3E8C0E206811B787C32755CC39EC, xmp.iid:FB7F11740720681189A0EF4C18321F8E, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:D9DA3E8C0E206811B787C32755CC39EC, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, xmp.iid:FA7F11740720681189A0EF4C18321F8E, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:07801174072068118DBBC0B94D85CC24, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:0f4ca282-7420-11dc-9700-ca999010a7ba, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:FE7F11740720681189A0EF4C18321F8E, uuid:331d7db7-7422-11dc-9700-ca999010a7ba, uuid:331d7dae-7422-11dc-9700-ca999010a7ba, uuid:b349fcbd-7425-11dc-9700-ca999010a7ba, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:FD7F11740720681189A0EF4C18321F8E, uuid:0471187c-7426-11dc-9700-ca999010a7ba, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:DADA3E8C0E206811B787C32755CC39EC, uuid:0d5790c0-00b0-11dd-80f2-c3af0edeb72a, xmp.iid:DDDA3E8C0E206811B787C32755CC39EC, uuid:0d5790c0-00b0-11dd-80f2-c3af0edeb72a, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:FB7F117407206811BCDE8ECA22971807, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BCDE8ECA22971807, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:87b86033-16e8-11de-8383-bf47ebb32c4a, xmp.iid:FF7F11740720681189A0EF4C18321F8E, uuid:6fde9b5b-16f0-11de-8383-bf47ebb32c4a, uuid:d7f56013-16f0-11de-8383-bf47ebb32c4a, uuid:49eeea22-16f1-11de-8383-bf47ebb32c4a, uuid:11d597c6-16f2-11de-8383-bf47ebb32c4a, uuid:11d597c0-16f2-11de-8383-bf47ebb32c4a, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:FF7F117407206811A187DD9CDF0E8C32, xmp.iid:F97F1174072068118DBBFEA1B8DF2CE7, xmp.iid:FA7F1174072068119F1BF522A7601826, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e700a272-b629-11dc-976a-b9bd16d52360, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:eb7a34ce-badf-11dc-861f-f7f3e36d565f, xmp.iid:DBDA3E8C0E206811B787C32755CC39EC, uuid:705cf4c5-f27c-11dc-ad62-8b77ea660cb3, uuid:705cf4be-f27c-11dc-ad62-8b77ea660cb3, xmp.iid:8BCD6A4A0A20681189A0EF4C18321F8E, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:7ff44b0e-16fa-11de-8383-bf47ebb32c4a, xmp.iid:008011740720681189A0EF4C18321F8E, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:8d968b61-d25f-11dc-8925-8ec683e345dd, xmp.iid:F77F1174072068118AF3F0D8B66A9A3B, xmp.iid:F87F1174072068118AF3F0D8B66A9A3B, uuid:475578b2-d25f-11dc-8925-8ec683e345dd, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:60e58165-0498-11dd-9b17-dab7ec7431e8, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:5ae1da16-0490-11dd-9b17-dab7ec7431e8, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:e7dc3da0-0498-11dd-9b17-dab7ec7431e8, uuid:60e58169-0498-11dd-9b17-dab7ec7431e8, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:82ea43ed-d4a5-11dc-b2b7-b7ef744af663, uuid:82ea43f4-d4a5-11dc-b2b7-b7ef744af663, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:3d2a59a5-d275-11dc-8925-8ec683e345dd, uuid:6a2a00b9-d275-11dc-8925-8ec683e345dd, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:eca692ec-b6da-11dc-9a77-c004a8faecee, uuid:34a9f3fe-b6e0-11dc-9a77-c004a8faecee, uuid:6ea6fa06-b6e7-11dc-9a77-c004a8faecee, uuid:3750e3e8-b6da-11dc-9a77-c004a8faecee, uuid:52294ab4-b6ed-11dc-9a77-c004a8faecee, uuid:eca692ec-b6da-11dc-9a77-c004a8faecee, uuid:d71e907f-b6ec-11dc-9a77-c004a8faecee, uuid:e5e32a57-b61a-11dc-976a-b9bd16d52360, uuid:e700a272-b629-11dc-976a-b9bd16d52360, uuid:eca692e5-b6da-11dc-9a77-c004a8faecee, uuid:eca692ec-b6da-11dc-9a77-c004a8faecee, uuid:470a7382-b6e9-11dc-9a77-c004a8faecee, uuid:3750e3ef-b6da-11dc-9a77-c004a8faecee, uuid:8c85bdbc-b6df-11dc-9a77-c004a8faecee, uuid:34a9f3f6-b6e0-11dc-9a77-c004a8faecee, uuid:705cf4c5-f27c-11dc-ad62-8b77ea660cb3, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:e700a272-b629-11dc-976a-b9bd16d52360, uuid:1641e2ae-badd-11dc-861f-f7f3e36d565f, uuid:1641e2ae-badd-11dc-861f-f7f3e36d565f, uuid:1641e2b5-badd-11dc-861f-f7f3e36d565f, uuid:eb7a34ce-badf-11dc-861f-f7f3e36d565f, xmp.iid:C1CB38790F206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:e700a272-b629-11dc-976a-b9bd16d52360, uuid:eb7a34ce-badf-11dc-861f-f7f3e36d565f, xmp.iid:C2CB38790F206811B787C32755CC39EC, uuid:705cf4c5-f27c-11dc-ad62-8b77ea660cb3, uuid:705cf4be-f27c-11dc-ad62-8b77ea660cb3, uuid:1fb1a104-1927-11de-9eb0-f547c217b150, xmp.iid:F87F1174072068118AF3F0D8B66A9A3B, uuid:475578b2-d25f-11dc-8925-8ec683e345dd, uuid:8d968b61-d25f-11dc-8925-8ec683e345dd, xmp.iid:F77F1174072068118AF3F0D8B66A9A3B, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:7ff44b0e-16fa-11de-8383-bf47ebb32c4a, xmp.iid:008011740720681189A0EF4C18321F8E, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:87b86033-16e8-11de-8383-bf47ebb32c4a, uuid:69ea6e92-1952-11de-9eb0-f547c217b150, xmp.iid:FF7F117407206811A187DD9CDF0E8C32, xmp.iid:F97F1174072068118DBBFEA1B8DF2CE7, xmp.iid:FA7F1174072068119F1BF522A7601826, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:dcc58201-d263-11dc-8925-8ec683e345dd, uuid:5ae1da12-0490-11dd-9b17-dab7ec7431e8, uuid:5ae1da0e-0490-11dd-9b17-dab7ec7431e8, uuid:619be47e-0083-11dc-9ac5-94316fee6bf9, uuid:01b3b5fa-8c99-11d8-90f7-d1f422b54ad6, uuid:58a972f5-8c98-11d8-90f7-d1f422b54ad6, uuid:de7a3336-d266-11dc-8925-8ec683e345dd, uuid:6ecb7e46-d265-11dc-8925-8ec683e345dd, uuid:de7a333d-d266-11dc-8925-8ec683e345dd, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:c1520321-7fbe-11dc-b2e7-da55fa350790, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:76532055-7fe0-11dc-b2e7-da55fa350790, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:9142a118-19e2-11de-ac99-d3cfbced3021, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:c152031a-7fbe-11dc-b2e7-da55fa350790, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:FA7F11740720681197A5C726C870D543, xmp.iid:FE7F11740720681197A5C726C870D543, xmp.iid:FF7F11740720681197A5C726C870D543, xmp.iid:35A856E00A20681197A5C726C870D543, xmp.iid:FA7F11740720681197A5C726C870D543, xmp.iid:FE7F11740720681197A5C726C870D543, xmp.iid:FF7F11740720681197A5C726C870D543, xmp.iid:FD7F11740720681197A5C726C870D543, xmp.iid:35A856E00A20681197A5C726C870D543, xmp.iid:33A856E00A20681197A5C726C870D543, xmp.iid:FD7F11740720681197A5C726C870D543, xmp.iid:DEDA3E8C0E206811B787C32755CC39EC, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:33A856E00A20681197A5C726C870D543, xmp.iid:FC7F11740720681197A5C726C870D543, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:BCCB38790F206811B787C32755CC39EC, xmp.iid:BDCB38790F206811B787C32755CC39EC, xmp.iid:E0DA3E8C0E206811B787C32755CC39EC, xmp.iid:BFCB38790F206811B787C32755CC39EC, xmp.iid:BECB38790F206811B787C32755CC39EC, xmp.iid:C0CB38790F206811B787C32755CC39EC, uuid:4b42ac64-7f0e-11dc-97b0-c1e6d7e0e89e, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:005740ab-99cf-11dc-aa6b-d56a1cec0f90, xmp.iid:F61FF1310B206811B13FD06576BB6D5B, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:FA7F1174072068119457BE28147C5D61, uuid:1e4bb82d-7271-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:78e59a9b-7296-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F77F11740720681193F49F16C97A2E8E, xmp.iid:DFDA3E8C0E206811B787C32755CC39EC, xmp.iid:FF7F11740720681185308812B7F26359, xmp.iid:25C8BA801F2068118DBBB9FCC29A16EA, xmp.iid:FA7F1174072068119457BE28147C5D61, xmp.iid:4C1049EC1320681185308812B7F26359, xmp.iid:25C8BA801F2068118DBBB9FCC29A16EA, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0f4ca282-7420-11dc-9700-ca999010a7ba, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0471187c-7426-11dc-9700-ca999010a7ba, uuid:b349fcbd-7425-11dc-9700-ca999010a7ba, uuid:331d7dae-7422-11dc-9700-ca999010a7ba, uuid:331d7db7-7422-11dc-9700-ca999010a7ba, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:4cb12b0b-7730-11dc-a7d2-d731f6a22abc, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, xmp.iid:FA7F117407206811A3B7C46DB22A4042, xmp.iid:37A8FF2F10206811B787C32755CC39EC, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:2d1477c9-8ede-11dc-9cda-e9a86ea32fcc, xmp.iid:36A8FF2F10206811B787C32755CC39EC, xmp.iid:35A8FF2F10206811B787C32755CC39EC, xmp.iid:3CA8FF2F10206811B787C32755CC39EC, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:3b3d0d9f-824e-11dc-9639-aa18168df8ab, uuid:4c0ba4cf-82d3-11dc-9ccf-dfd0e6b2eb9e, uuid:3b3d0d9f-824e-11dc-9639-aa18168df8ab, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F87F1174072068119E6A9B94A62517ED, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:FA7F1174072068119E6A9B94A62517ED, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, uuid:fbf1cc5e-7349-11dc-a55b-eea5e129e787, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:5a0c31c8-1626-11de-9f44-fc5a211a0338, xmp.iid:BEDB2B9C3520681190ADFD406050452D, xmp.iid:00801174072068119749A90D984B3854, uuid:2d1477c9-8ede-11dc-9cda-e9a86ea32fcc, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, xmp.iid:F97F117407206811BCDE8ECA22971807, xmp.iid:39A856E00A20681197A5C726C870D543, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:0313d116-afd8-11dc-a1f4-865425d3677c, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:0313d11d-afd8-11dc-a1f4-865425d3677c, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:5bbf6898-afd8-11dc-a1f4-865425d3677c, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:5bbf6891-afd8-11dc-a1f4-865425d3677c, uuid:8808435a-afb1-11dc-a1f4-865425d3677c, xmp.iid:38A8FF2F10206811B787C32755CC39EC, uuid:e70ae1b3-8fab-11dc-82b2-89a50880acec, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:4c0ba4cf-82d3-11dc-9ccf-dfd0e6b2eb9e, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:76532055-7fe0-11dc-b2e7-da55fa350790, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:33A856E00A20681197A5C726C870D543, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:a213407d-9ffe-11dc-bd93-acc6a3943456, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:548bb138-b08a-11dc-a635-932fba85ce68, xmp.iid:FE7F1174072068119CC9F527FD2724E9, uuid:63bb1984-8c94-11d8-90f7-d1f422b54ad6, uuid:e26dca03-8c95-11d8-90f7-d1f422b54ad6, uuid:e26dca03-8c95-11d8-90f7-d1f422b54ad6, uuid:e26dca03-8c95-11d8-90f7-d1f422b54ad6, uuid:e18bd789-8c96-11d8-90f7-d1f422b54ad6, xmp.iid:FF7F117407206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:B42E1B8B10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:3EA8FF2F10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:3DA8FF2F10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:B52E1B8B10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:B72E1B8B10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:B62E1B8B10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:34A8FF2F10206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:107EE7260E206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:52f1d878-7d81-11dc-9e03-cb5856fd8286, xmp.iid:C4CB38790F206811B787C32755CC39EC, xmp.iid:3AA8FF2F10206811B787C32755CC39EC, xmp.iid:3BA8FF2F10206811B787C32755CC39EC, xmp.iid:39A8FF2F10206811B787C32755CC39EC, xmp.iid:C3CB38790F206811B787C32755CC39EC, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:b49cff29-7cc8-11dc-9e4b-f06a8a2dd257, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, uuid:77dbf1a5-a582-11dc-bd1e-907773d0b13c, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:C5CB38790F206811B787C32755CC39EC, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:018011740720681185538949193C7FE0, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:e3a83711-7dc4-11dc-ba00-f7cc96a826aa, uuid:f0a87e5f-f103-11dc-ba5b-817a56aa0218, uuid:28f0b23e-7ccb-11dc-9e4b-f06a8a2dd257, xmp.iid:F97F11740720681186E0904F47EAA708, xmp.iid:C6CB38790F206811B787C32755CC39EC, xmp.iid:078011740720681185538949193C7FE0, xmp.iid:FF5FA7D11C20681185538949193C7FE0, xmp.iid:6A5D668428206811A110EF2FA505F80B, xmp.iid:2B3C22E738206811A110EF2FA505F80B, xmp.iid:FC7F11740720681186E0904F47EAA708, xmp.iid:FF7F11740720681186E0904F47EAA708, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5072c196-71ce-11dc-9946-d22ee3065e75, uuid:df699283-7265-11dc-99c5-f7b8015dbf23, uuid:5072c19d-71ce-11dc-9946-d22ee3065e75, uuid:df875a77-7262-11dc-99c5-f7b8015dbf23, uuid:d71fb67f-71ce-11dc-9946-d22ee3065e75, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:20758d17-726d-11dc-99c5-f7b8015dbf23, uuid:f80a25b3-726d-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:0480117407206811900280811F259D21, xmp.iid:048011740720681195FEE3ACEB3419BA, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:5072c196-71ce-11dc-9946-d22ee3065e75, uuid:df699283-7265-11dc-99c5-f7b8015dbf23, uuid:5072c19d-71ce-11dc-9946-d22ee3065e75, uuid:df875a77-7262-11dc-99c5-f7b8015dbf23, uuid:d71fb67f-71ce-11dc-9946-d22ee3065e75, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, xmp.iid:F97F117407206811BCDE8ECA22971807, xmp.iid:39A856E00A20681197A5C726C870D543, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:157EE7260E206811AB1495435AFD43C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:4861af63-771b-11dc-a7d2-d731f6a22abc, uuid:9d31e43e-7cb6-11dc-9e4b-f06a8a2dd257, xmp.iid:BD2E1B8B10206811B787C32755CC39EC, xmp.iid:BB2E1B8B10206811B787C32755CC39EC, uuid:bec1c191-74b8-11dc-860f-f1ec5fb9cfa7, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:af66b367-7732-11dc-a7d2-d731f6a22abc, xmp.iid:FA7F1174072068119E6A9B94A62517ED, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, xmp.iid:F87F1174072068118E3886301452B1C8, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:04cef629-b06c-11dc-a635-932fba85ce68, uuid:da36c01f-b079-11dc-a635-932fba85ce68, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:548bb138-b08a-11dc-a635-932fba85ce68, uuid:28700059-a89e-11dc-8837-9a6948e08d6c, xmp.iid:FE7F1174072068119CC9F527FD2724E9, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:81bd7f15-b092-11dc-a635-932fba85ce68, uuid:a6fbf645-b097-11dc-a635-932fba85ce68, uuid:81bd7f15-b092-11dc-a635-932fba85ce68, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:fe847322-f114-11dc-ba5b-817a56aa0218, uuid:fe847326-f114-11dc-ba5b-817a56aa0218, uuid:2ae3088f-f115-11dc-ba5b-817a56aa0218, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:81bd7f0e-b092-11dc-a635-932fba85ce68, uuid:2ae3088f-f115-11dc-ba5b-817a56aa0218, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:93f4e25f-82db-11dc-9ccf-dfd0e6b2eb9e, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:3bf5ccdc-9039-11dc-bcb6-dbda147b7ba1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:3bf5ccd5-9039-11dc-bcb6-dbda147b7ba1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F77F117407206811AA54AA1F6DC2249C, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:FA7F1174072068119E6A9B94A62517ED, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:88084356-afb1-11dc-a1f4-865425d3677c, xmp.iid:B92E1B8B10206811B787C32755CC39EC, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:93f4e258-82db-11dc-9ccf-dfd0e6b2eb9e, uuid:04cef622-b06c-11dc-a635-932fba85ce68, xmp.iid:BE2E1B8B10206811B787C32755CC39EC, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:3b3d0d9f-824e-11dc-9639-aa18168df8ab, uuid:4c0ba4cf-82d3-11dc-9ccf-dfd0e6b2eb9e, uuid:3b3d0d9f-824e-11dc-9639-aa18168df8ab, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:b48c0480-b137-11dc-bbf4-f4625a6a091b, uuid:dc425a95-b136-11dc-bbf4-f4625a6a091b, uuid:b48c0479-b137-11dc-bbf4-f4625a6a091b, uuid:dc425a8e-b136-11dc-bbf4-f4625a6a091b, uuid:b48c0480-b137-11dc-bbf4-f4625a6a091b, uuid:983c5bb2-b0a7-11dc-a635-932fba85ce68, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:FD7F1174072068119528C66927AA9E92, xmp.iid:B2BAD27E0A2068119528C66927AA9E92, xmp.iid:B6BAD27E0A2068119528C66927AA9E92, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:32686a9c-b548-11dc-aacd-d54e2da6c6f3, uuid:d3dd91e3-b548-11dc-aacd-d54e2da6c6f3, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:F97F1174072068119528C66927AA9E92, xmp.iid:B9BAD27E0A2068119528C66927AA9E92, xmp.iid:F0D9A2930E2068119528C66927AA9E92, xmp.iid:F3D9A2930E2068119528C66927AA9E92, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:675d888c-b557-11dc-aacd-d54e2da6c6f3, uuid:d3dd91ea-b548-11dc-aacd-d54e2da6c6f3, xmp.iid:0380117407206811AA8CA6F8B46B9EE1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:BA2E1B8B10206811B787C32755CC39EC, xmp.iid:0980117407206811AA8CA6F8B46B9EE1, uuid:230a8af5-74bb-11dc-860f-f1ec5fb9cfa7, xmp.iid:E403B51C0D206811AA8CA6F8B46B9EE1, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:2c08bb6e-b55b-11dc-aacd-d54e2da6c6f3, xmp.iid:BC2E1B8B10206811B787C32755CC39EC, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:0180117407206811AA8CA6F8B46B9EE1, xmp.iid:0780117407206811AA8CA6F8B46B9EE1, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:F97F117407206811BDD6F90F992BEA99, xmp.iid:F97F117407206811BDD6F90F992BEA99, uuid:f26517e5-b161-11dc-bbf4-f4625a6a091b, uuid:fe3b3925-b139-11dc-bbf4-f4625a6a091b, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:ceb16944-b169-11dc-bbf4-f4625a6a091b, uuid:892fdb0a-b528-11dc-aacd-d54e2da6c6f3, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:4f9d1d00-b169-11dc-bbf4-f4625a6a091b, uuid:4f9d1cf9-b169-11dc-bbf4-f4625a6a091b, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:1c2de32e-b16a-11dc-bbf4-f4625a6a091b, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:0980117407206811815DC9970D117B65, xmp.iid:0480117407206811815DC9970D117B65, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0980117407206811815DC9970D117B65, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:2eecb333-7c15-11dd-93e9-8c2eb41ff004, uuid:f92a287c-7c09-11dd-93e9-8c2eb41ff004, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:dd4e62ea-7c23-11dd-93e9-8c2eb41ff004, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:F38DF5AC3F206811815DC9970D117B65, uuid:b1ba9db4-028a-11dd-a1a6-be1982a286af, uuid:b1ba9db9-028a-11dd-a1a6-be1982a286af, uuid:b1ba9dbc-028a-11dd-a1a6-be1982a286af, xmp.iid:6A81A8D721206811815DC9970D117B65, xmp.iid:0BFFA4AB3B206811815DC9970D117B65, xmp.iid:C41F68883C206811815DC9970D117B65, xmp.iid:FB8DF5AC3F206811815DC9970D117B65, xmp.iid:FEFE9D6143206811815DC9970D117B65, xmp.iid:02FF9D6143206811815DC9970D117B65, xmp.iid:ED5CBD1C45206811815DC9970D117B65, xmp.iid:B0B4A54946206811815DC9970D117B65, uuid:97edf9d0-027e-11dd-a1a6-be1982a286af, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, xmp.iid:0480117407206811815DC9970D117B65, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:e71ac25d-061e-11dd-86fd-fbe946d3dc85, uuid:e71ac25a-061e-11dd-86fd-fbe946d3dc85, uuid:be511960-061a-11dd-86fd-fbe946d3dc85, uuid:78d6eca4-dc99-11dc-8d8a-8fd4be834d4a, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:f9bb1467-dca2-11dc-8d8a-8fd4be834d4a, uuid:769186f3-dca7-11dc-8d8a-8fd4be834d4a, uuid:9e2b49fe-dd47-11dc-a0a4-8ceeabb341d5, uuid:f9bb1460-dca2-11dc-8d8a-8fd4be834d4a, xmp.iid:F73FEF0A3720681190ADFD406050452D, uuid:5c59186a-dd59-11dc-a0a4-8ceeabb341d5, uuid:9e2b49fe-dd47-11dc-a0a4-8ceeabb341d5, uuid:5c591871-dd59-11dc-a0a4-8ceeabb341d5, uuid:a9beaceb-edca-11dc-9dd0-a91e060925cb, uuid:0aa8dee3-060e-11dd-86fd-fbe946d3dc85, uuid:ca5a01c7-dd5b-11dc-a0a4-8ceeabb341d5, uuid:be51195c-061a-11dd-86fd-fbe946d3dc85, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:4075f897-01f5-11dd-8680-9b7113458a3f, xmp.iid:0480117407206811A410B5C650A6D4D7, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:FD7F1174072068118DBBE10BAEC464E0, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, xmp.iid:FF7F1174072068118DBBE10BAEC464E0, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, uuid:8fa3fae7-01f4-11dd-8680-9b7113458a3f, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:78d6eca4-dc99-11dc-8d8a-8fd4be834d4a, uuid:be511960-061a-11dd-86fd-fbe946d3dc85, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5d59895e-0341-11dd-9df4-bb8dffda276c, uuid:dae4e740-0346-11dd-9df4-bb8dffda276c, xmp.iid:012BA4643220681197A5C726C870D543, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:a8b82c22-1d17-11dd-8060-9b1f38cc63d9, xmp.iid:FB1FF1310B206811B13FD06576BB6D5B, xmp.iid:F91FF1310B206811B13FD06576BB6D5B, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:2c52ed14-0189-11dd-8680-9b7113458a3f, uuid:d564af3f-0189-11dd-8680-9b7113458a3f, uuid:2c52ed10-0189-11dd-8680-9b7113458a3f, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:df69928b-7265-11dc-99c5-f7b8015dbf23, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:3b8c573f-d4c0-11dc-b2b7-b7ef744af663, uuid:f8cdf334-d6f8-11dc-9854-bb579a886120, uuid:d564af46-0189-11dd-8680-9b7113458a3f, uuid:191ff3c4-00c5-11dd-80f2-c3af0edeb72a, uuid:cf4243b1-d4bd-11dc-b2b7-b7ef744af663, uuid:ebf8731d-00c3-11dd-80f2-c3af0edeb72a, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:ebf8731d-00c3-11dd-80f2-c3af0edeb72a, uuid:cf4243a9-d4bd-11dc-b2b7-b7ef744af663, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:f8cdf334-d6f8-11dc-9854-bb579a886120, uuid:beca1ada-d6f4-11dc-9854-bb579a886120, uuid:5a8cd40c-d6f6-11dc-9854-bb579a886120, uuid:5a8cd405-d6f6-11dc-9854-bb579a886120, uuid:5a8cd405-d6f6-11dc-9854-bb579a886120, uuid:c88971f2-dae3-11dc-a72d-f4bac21a9db7, uuid:6207864d-0165-11dd-8680-9b7113458a3f, xmp.iid:FC1FF1310B206811B13FD06576BB6D5B, uuid:0e543f1d-9c5c-11dd-88fa-82e3f7839386, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:87587168-d7c1-11dc-891b-c3e2ed367e49, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:87587168-d7c1-11dc-891b-c3e2ed367e49, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5e1efbf5-d7c7-11dc-891b-c3e2ed367e49, uuid:6d59a249-da1c-11dc-a726-f9c987e8ac9e, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:5822993e-faeb-11db-99d2-b2dd32bcc61d, uuid:20cc8019-d7c9-11dc-891b-c3e2ed367e49 Manifest Reference Document ID : adobe:docid:photoshop:4688bb07-0612-11dd-a70a-99a66316d48e, adobe:docid:photoshop:4688bb07-0612-11dd-a70a-99a66316d48e, adobe:docid:photoshop:3235ca83-8c94-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:cd0f4d4e-8c92-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:b0feef03-8c92-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:b4a09de1-92c5-11d8-a8d7-b0728ce7167e, xmp.did:F77F117407206811B787C32755CC39EC, adobe:docid:photoshop:d945ca07-d10f-11d8-9775-a7edda0b3b83, adobe:docid:photoshop:fa0bfbc4-9f67-11d8-91bc-fc88b2a3a04a, adobe:docid:photoshop:b4a09ddd-92c5-11d8-a8d7-b0728ce7167e, adobe:docid:photoshop:b4a09dd9-92c5-11d8-a8d7-b0728ce7167e, adobe:docid:photoshop:7f6ebd28-92c5-11d8-a8d7-b0728ce7167e, adobe:docid:photoshop:4dc6721e-d10f-11d8-8946-e7c216a924e1, xmp.did:01801174072068118669D32E75F5E010, adobe:docid:photoshop:62cab8ac-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:4688bb07-0612-11dd-a70a-99a66316d48e, adobe:docid:photoshop:cdb26861-1e6c-11dd-989d-ad3aec15b89d, adobe:docid:photoshop:45f52cb1-1e80-11dd-989d-ad3aec15b89d, adobe:docid:photoshop:ec46c440-1e80-11dd-989d-ad3aec15b89d, adobe:docid:photoshop:7fa39e0a-5ea7-11dc-b837-a686bcd887dc, adobe:docid:photoshop:3ac82349-23e7-11dd-82b0-b4b0a6ec165a, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:095a54fd-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:7f298530-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:342bf630-8c99-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:709aae1b-8cb4-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:a4a4035e-a8c7-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:68d5fa0e-a8d4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:5677e358-12d6-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:cdd6604c-1853-11dd-b1ec-958adbe68c88, adobe:docid:photoshop:c706c108-7d78-11dc-9e03-cb5856fd8286, xmp.did:F77F1174072068119627EEA275E8A765, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:68d5fa0e-a8d4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:953c4aa9-ca95-11d8-9dd8-f1e9653dac98, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:953c4aa9-ca95-11d8-9dd8-f1e9653dac98, adobe:docid:photoshop:7915fcd3-a8c2-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:7915fcd3-a8c2-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:953c4aa9-ca95-11d8-9dd8-f1e9653dac98, adobe:docid:photoshop:084c9707-a8c4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:084c9707-a8c4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:084c9703-a8c4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:084c9703-a8c4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:9969eb59-a8c2-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:89d17d45-a8c3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:9969eb55-a8c2-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:9969eb51-a8c2-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:bcf1178b-a8c4-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:15574b4f-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:d0c73391-16a1-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:ac148111-16c8-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f470836c-16c8-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:e38727fa-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:f4708371-16c8-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:93069cc0-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:5b99abb3-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:93069cbc-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:5b99abaf-16bd-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:e2bb43fc-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:29f8c793-2729-11d7-8f93-b93553240f27, adobe:docid:photoshop:03e4a27c-1db8-11dd-a738-9e23a1e1f261, adobe:docid:photoshop:03e4a282-1db8-11dd-a738-9e23a1e1f261, adobe:docid:photoshop:d68d89a5-1db5-11dd-a738-9e23a1e1f261, adobe:docid:photoshop:d68d89a5-1db5-11dd-a738-9e23a1e1f261, adobe:docid:photoshop:33d0ac1c-16c0-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:9e26952f-0d77-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f7c21f70-0702-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:f7c21f72-0702-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:f7c21f77-0702-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:ea644a64-0704-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:b7491857-0705-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:b749185c-0705-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:ea644a5f-0704-11dd-ae8e-91d617051c1e, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:fb95cdc3-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:fb95cdbf-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7490e446-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:66e4c970-7d78-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7490e43f-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:c706c108-7d78-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:9d31e440-7cb6-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, xmp.did:0F7EE7260E206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:25b6e428-7d80-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:3bcc879d-7d82-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:8546a15a-a584-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:03b996cd-a584-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:89a3a70b-a583-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:3428ed33-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:e75bcc31-7cc7-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:19e96b90-a582-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:52f1d879-7d81-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, xmp.did:018011740720681185538949193C7FE0, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f147b920-0d7b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:e3a8370e-7dc4-11dc-ba00-f7cc96a826aa, adobe:docid:photoshop:52f1d879-7d81-11dc-9e03-cb5856fd8286, xmp.did:6A5D668428206811A110EF2FA505F80B, xmp.did:2A3C22E738206811A110EF2FA505F80B, adobe:docid:photoshop:3428ed2e-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:3428ed2e-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:13912fe4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:6ed90949-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:319e2fa4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:01016329-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:9ee128f4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:13912fe4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:9ee128f4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:6ed90949-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:01016329-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:319e2fa4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:c4b77f9d-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:ca67f2c5-2b41-11da-9405-f75a0af6dee0, xmp.did:0180117407206811900280811F259D21, xmp.did:018011740720681195FEE3ACEB3419BA, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:3b0ac662-0e3b-11dd-9c81-d06931e3a249, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:da726674-1443-11dd-9985-da96dce52c6b, adobe:docid:photoshop:da726670-1443-11dd-9985-da96dce52c6b, adobe:docid:photoshop:da726670-1443-11dd-9985-da96dce52c6b, adobe:docid:photoshop:ed78752c-177f-11dd-a88e-ed1ccf31c813, adobe:docid:photoshop:da726678-1443-11dd-9985-da96dce52c6b, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:c5b146b0-0d45-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:c5b146ae-0d45-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:c5b146b0-0d45-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:c5b146ae-0d45-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:0380117407206811B13FD06576BB6D5B, adobe:docid:photoshop:7e20e506-0c99-11dd-bdbb-825daba41736, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7e20e50c-0c99-11dd-bdbb-825daba41736, adobe:docid:photoshop:23b3cdaf-0ca7-11dd-bdbb-825daba41736, adobe:docid:photoshop:23b3cdaa-0ca7-11dd-bdbb-825daba41736, adobe:docid:photoshop:7e20e50a-0c99-11dd-bdbb-825daba41736, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:b3312b98-2563-11dc-9888-e1ae6dfaff4f, adobe:docid:photoshop:751c59fb-2572-11dc-9888-e1ae6dfaff4f, xmp.did:0380117407206811B13FD06576BB6D5B, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:b5f89ca7-8c97-11d8-90f7-d1f422b54ad6, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:0180117407206811B13FD06576BB6D5B, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:ddd64acf-c3b4-11d8-803e-96c909aba39a, adobe:docid:photoshop:ddd64acf-c3b4-11d8-803e-96c909aba39a, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:6fa43a2c-fb4b-11dd-b000-937ba47f8918, adobe:docid:photoshop:0de0fa38-0017-11de-8e90-af31c3ff404f, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:FA3FEF0A3720681190ADFD406050452D, xmp.did:0480117407206811B13FD06576BB6D5B, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7a8c7f6f-169a-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:ddd64acf-c3b4-11d8-803e-96c909aba39a, adobe:docid:photoshop:ddd64acf-c3b4-11d8-803e-96c909aba39a, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, adobe:docid:photoshop:7d21961e-fb53-11dd-b000-937ba47f8918, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811AB1495435AFD43C8, xmp.did:F77F117407206811B2E69515CF794DD1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df0fb32f-a99b-11d8-8205-d59e6670a055, adobe:docid:photoshop:72485144-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:3b0ac66a-0e3b-11dd-9c81-d06931e3a249, adobe:docid:photoshop:c203e715-0e4b-11dd-9c81-d06931e3a249, adobe:docid:photoshop:c203e711-0e4b-11dd-9c81-d06931e3a249, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:23f38fa0-0bc3-11de-a767-d5ab1fd17644, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:8a273a9a-0bda-11dd-b0d7-f6e88b9f4d0d, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f25eeae3-1699-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:1146be48-950b-11dd-a57f-9115b0f03d76, adobe:docid:photoshop:3074d95a-fb3e-11dc-a90b-eaf55cdece55, xmp.did:FB7F1174072068119D88BBA62C0F9223, adobe:docid:photoshop:619be47b-0083-11dc-9ac5-94316fee6bf9, adobe:docid:photoshop:3074d95a-fb3e-11dc-a90b-eaf55cdece55, xmp.did:88CBEFA5152068119D88BBA62C0F9223, adobe:docid:photoshop:1146be48-950b-11dd-a57f-9115b0f03d76, adobe:docid:photoshop:65481c7a-819f-11dd-bca0-adf27e6c8ab9, adobe:docid:photoshop:1146be48-950b-11dd-a57f-9115b0f03d76, adobe:docid:photoshop:1146be48-950b-11dd-a57f-9115b0f03d76, adobe:docid:photoshop:65481c73-819f-11dd-bca0-adf27e6c8ab9, adobe:docid:photoshop:1146be48-950b-11dd-a57f-9115b0f03d76, adobe:docid:photoshop:619be47b-0083-11dc-9ac5-94316fee6bf9, adobe:docid:photoshop:619be47b-0083-11dc-9ac5-94316fee6bf9, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:3448f7da-0bda-11dd-b0d7-f6e88b9f4d0d, adobe:docid:photoshop:3448f7e1-0bda-11dd-b0d7-f6e88b9f4d0d, adobe:docid:photoshop:8a273a9a-0bda-11dd-b0d7-f6e88b9f4d0d, adobe:docid:photoshop:e2bb43f5-0d5b-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:72485144-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:62cab8a8-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:62cab8ac-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:62cab8b0-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7d300cfa-7e92-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:c95141ed-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:c95141f5-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:62cab8ac-7e91-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:b5558762-1699-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:b555875e-1699-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:7f298538-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:5c3b2143-1699-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:5c3b2143-1699-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:1d55116c-7e95-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:1d551168-7e95-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:315101df-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:315101db-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e87bd75-19ad-11dd-aaad-a7cd6bf507f7, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:9e66cc1e-0d38-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:9e66cc25-0d38-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:9dfd2f38-0d39-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:9e66cc25-0d38-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:9dfd2f38-0d39-11dd-a9c0-a8dd2a442e10, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:095a54f7-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:16af009d-7e9e-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:4f2e1e51-7e9f-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:0b58df5e-7ea0-11d8-b8bb-e2e251670bc1, adobe:docid:photoshop:095a54f7-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:7f298534-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:3f376820-169a-11dd-8d3b-b2cafb99f074, adobe:docid:photoshop:7248513c-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:cf55f04b-16c6-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:095a54fd-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:7f298530-16c5-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:cf55f047-16c6-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:cf55f043-16c6-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:72485140-16c4-11dd-a5b4-efb4f467ed13, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e52dd492-12b8-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:1de0f99b-12c4-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:2d4dd7b3-1138-11de-b1fd-9735208b1a1d, adobe:docid:photoshop:cdecb9c4-1177-11de-b1fd-9735208b1a1d, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:6b95d451-12b8-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:7a75b997-12b3-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:7a75b993-12b3-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:7a75b98f-12b3-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:c5b00b4c-12b0-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:1632bacf-12b2-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:5151d5ae-12b1-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:1632bad3-12b2-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:5151d5aa-12b1-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:5151d5b2-12b1-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:5c11a036-12b6-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:6b95d458-12b8-11dd-a5ac-a848d52ca593, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:CA79742A16206811B92E9F118B142CC8, xmp.did:F77F1174072068119627EEA275E8A765, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:58cec679-fb6e-11dd-b000-937ba47f8918, uuid:1419f629-a5c8-11d8-b540-003065a723e8, uuid:73150c14-a5c8-11d8-b540-003065a723e8, xmp.did:224FED7E3C206811A32EDC59C2C610DE, adobe:docid:photoshop:cb2d8046-5599-11dd-bb20-9b533931cf2f, xmp.did:D479742A16206811B92E9F118B142CC8, adobe:docid:photoshop:a2556f1b-b6ac-11dc-9a77-c004a8faecee, adobe:docid:photoshop:4719a369-baae-11db-82d4-c7604f7dd5ea, xmp.did:79CDA0C521206811B92E9F118B142CC8, xmp.did:F77F117407206811A806A4F57D798B84, xmp.did:FC7F117407206811A806A4F57D798B84, adobe:docid:photoshop:8a936bb3-0e48-11de-843f-a2678a84aa3f, xmp.did:8B0390172E2068118FEEF053084E8757, xmp.did:FF7F1174072068118FEEF053084E8757, xmp.did:0A480DC023206811B92E9F118B142CC8, adobe:docid:photoshop:7e42335c-0e4b-11de-843f-a2678a84aa3f, adobe:docid:photoshop:eab59fc1-c98d-11db-8e5c-a62a2b29a2c9, xmp.did:F1FC690B37206811B92E9F118B142CC8, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:00c68cc6-1c43-11dd-bc28-d80b581f5020, adobe:docid:photoshop:00c68cc0-1c43-11dd-bc28-d80b581f5020, adobe:docid:photoshop:00c68cc3-1c43-11dd-bc28-d80b581f5020, adobe:docid:photoshop:17b333d9-be07-11d8-ac10-b15a07582d1b, adobe:docid:photoshop:1b60af92-1c3d-11dd-bc28-d80b581f5020, adobe:docid:photoshop:1b60af8f-1c3d-11dd-bc28-d80b581f5020, adobe:docid:photoshop:4d2c6d1f-1c43-11dd-bc28-d80b581f5020, adobe:docid:photoshop:7f53c32f-1c27-11dd-bf4f-e4035d312cd1, adobe:docid:photoshop:a7ac2950-1da9-11dd-a738-9e23a1e1f261, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:8460ecb0-7fac-11dc-b2e7-da55fa350790, adobe:docid:photoshop:c9a3bb08-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:b377ebdb-f591-11db-9141-9a525b0ecaac, adobe:docid:photoshop:ccafcdb6-8e92-11dc-9cda-e9a86ea32fcc, adobe:docid:photoshop:c9a3bb04-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:3238214b-9908-11dc-ae71-8620d0e90946, adobe:docid:photoshop:6bf8dc2b-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:9a90d978-99ce-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:6fd8141a-9908-11dc-ae71-8620d0e90946, adobe:docid:photoshop:5cf32f9e-9909-11dc-ae71-8620d0e90946, adobe:docid:photoshop:005740ac-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:6bf8dc27-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:6bf8dc23-99cf-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:2512a85c-99cb-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:2475aad5-99d0-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:67a0137a-99ca-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:903fa170-99ca-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:1e4bb827-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:bd21b100-98d5-11dc-ae71-8620d0e90946, adobe:docid:photoshop:9a90d97f-99ce-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:f6967ee1-047a-11dd-9b17-dab7ec7431e8, adobe:docid:photoshop:2512a860-99cb-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:2475aad9-99d0-11dc-aa6b-d56a1cec0f90, adobe:docid:photoshop:1e4bb82e-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:bd21b100-98d5-11dc-ae71-8620d0e90946, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:1e4bb82e-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1e4bb827-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:13912fe4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:6ed90949-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:319e2fa4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:0b00e55c-16d9-11da-859d-e7c1db518761, adobe:docid:photoshop:ad8d88e3-7e44-11dc-ac2d-f7d6ac67d1ea, adobe:docid:photoshop:b589ded4-8208-11dc-9639-aa18168df8ab, adobe:docid:photoshop:d23da050-8f96-11dc-82b2-89a50880acec, adobe:docid:photoshop:ccafcdb6-8e92-11dc-9cda-e9a86ea32fcc, adobe:docid:photoshop:f376b7fa-9031-11dc-bcb6-dbda147b7ba1, adobe:docid:photoshop:3bf5ccd6-9039-11dc-bcb6-dbda147b7ba1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:417fa4ae-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f657b6af-8fb4-11dd-9890-bea0612ba259, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f657b6af-8fb4-11dd-9890-bea0612ba259, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:75d52be1-15f3-11de-9f44-fc5a211a0338, adobe:docid:photoshop:098673ac-7cc4-11dc-ad3b-f1997ba572cc, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f657b6af-8fb4-11dd-9890-bea0612ba259, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f657b6af-8fb4-11dd-9890-bea0612ba259, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:ef062a3a-15fa-11de-9f44-fc5a211a0338, adobe:docid:photoshop:07dc709c-1605-11de-9f44-fc5a211a0338, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f3f5f56d-146e-11de-9450-913110a7cbc0, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:04801174072068118DBBC0B94D85CC24, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:14a6ae43-740d-11dc-9700-ca999010a7ba, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:417fa4b2-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:5b013410-f6a7-11d9-bdb9-be2abf216471, adobe:docid:photoshop:0f4ca283-7420-11dc-9700-ca999010a7ba, adobe:docid:photoshop:5b01340f-f6a7-11d9-bdb9-be2abf216471, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:417fa4b2-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:4aaf9df6-1237-11da-be8d-b953865d7c6c, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:07dc70a6-1605-11de-9f44-fc5a211a0338, adobe:docid:photoshop:0d5790bd-00b0-11dd-80f2-c3af0edeb72a, adobe:docid:photoshop:a4ab2f5c-161b-11de-9f44-fc5a211a0338, adobe:docid:photoshop:0d5790bd-00b0-11dd-80f2-c3af0edeb72a, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:FA7F117407206811BCDE8ECA22971807, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:3fe3b45d-16cf-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:417fa4b6-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:6fde9b52-16f0-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:8a1e3622-aa31-11dc-ad4a-d34731b506dc, adobe:docid:photoshop:9f887007-885f-11db-b2dc-b65e22312890, adobe:docid:photoshop:49eeea23-16f1-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:49eeea24-16f1-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:FC7F117407206811A187DD9CDF0E8C32, adobe:docid:photoshop:098673ac-7cc4-11dc-ad3b-f1997ba572cc, adobe:docid:photoshop:97024c2c-7cc5-11dc-ad3b-f1997ba572cc, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e700a26c-b629-11dc-976a-b9bd16d52360, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:eb7a34c8-badf-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:8351912c-3198-11da-8468-8cf3cc0557fa, adobe:docid:photoshop:705cf4bf-f27c-11dc-ad62-8b77ea660cb3, adobe:docid:photoshop:0fbf7127-f27c-11dc-ad62-8b77ea660cb3, adobe:docid:photoshop:417fa4b6-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:d96a5cc3-16f3-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:69ea6e93-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:475578ba-d25f-11dc-8925-8ec683e345dd, xmp.did:F77F1174072068118AF3F0D8B66A9A3B, xmp.did:F87F1174072068118AF3F0D8B66A9A3B, adobe:docid:photoshop:383b71bb-d25e-11dc-8925-8ec683e345dd, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:60e58162-0498-11dd-9b17-dab7ec7431e8, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:5ae1da13-0490-11dd-9b17-dab7ec7431e8, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:cab6a0a6-1acb-11da-a639-e63d0019c1f4, adobe:docid:photoshop:6d80fc03-1acc-11da-a639-e63d0019c1f4, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:83499da1-d4a4-11dc-b2b7-b7ef744af663, adobe:docid:photoshop:82ea43ee-d4a5-11dc-b2b7-b7ef744af663, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:de7a333e-d266-11dc-8925-8ec683e345dd, adobe:docid:photoshop:3d2a59a6-d275-11dc-8925-8ec683e345dd, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:eca692e6-b6da-11dc-9a77-c004a8faecee, adobe:docid:photoshop:34a9f3fb-b6e0-11dc-9a77-c004a8faecee, adobe:docid:photoshop:6ea6fa00-b6e7-11dc-9a77-c004a8faecee, adobe:docid:photoshop:a2556f1b-b6ac-11dc-9a77-c004a8faecee, adobe:docid:photoshop:470a7383-b6e9-11dc-9a77-c004a8faecee, adobe:docid:photoshop:eca692e6-b6da-11dc-9a77-c004a8faecee, adobe:docid:photoshop:470a738a-b6e9-11dc-9a77-c004a8faecee, adobe:docid:photoshop:876e80b3-b618-11dc-976a-b9bd16d52360, adobe:docid:photoshop:e700a26c-b629-11dc-976a-b9bd16d52360, adobe:docid:photoshop:3750e3f0-b6da-11dc-9a77-c004a8faecee, adobe:docid:photoshop:eca692e6-b6da-11dc-9a77-c004a8faecee, adobe:docid:photoshop:6ea6fa07-b6e7-11dc-9a77-c004a8faecee, adobe:docid:photoshop:3750e3e9-b6da-11dc-9a77-c004a8faecee, adobe:docid:photoshop:3032d594-b6dd-11dc-9a77-c004a8faecee, adobe:docid:photoshop:8c85bdbd-b6df-11dc-9a77-c004a8faecee, adobe:docid:photoshop:705cf4bf-f27c-11dc-ad62-8b77ea660cb3, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:e700a26c-b629-11dc-976a-b9bd16d52360, adobe:docid:photoshop:5016ec17-bad9-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:5016ec17-bad9-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:1641e2af-badd-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:eb7a34c8-badf-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:8351912c-3198-11da-8468-8cf3cc0557fa, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:e700a26c-b629-11dc-976a-b9bd16d52360, adobe:docid:photoshop:eb7a34c8-badf-11dc-861f-f7f3e36d565f, adobe:docid:photoshop:8351912c-3198-11da-8468-8cf3cc0557fa, adobe:docid:photoshop:705cf4bf-f27c-11dc-ad62-8b77ea660cb3, adobe:docid:photoshop:0fbf7127-f27c-11dc-ad62-8b77ea660cb3, adobe:docid:photoshop:1fb1a101-1927-11de-9eb0-f547c217b150, xmp.did:F87F1174072068118AF3F0D8B66A9A3B, adobe:docid:photoshop:383b71bb-d25e-11dc-8925-8ec683e345dd, adobe:docid:photoshop:475578ba-d25f-11dc-8925-8ec683e345dd, xmp.did:F77F1174072068118AF3F0D8B66A9A3B, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:d96a5cc3-16f3-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:69ea6e93-1952-11de-9eb0-f547c217b150, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:3fe3b45d-16cf-11de-8383-bf47ebb32c4a, adobe:docid:photoshop:417fa4b6-1952-11de-9eb0-f547c217b150, xmp.did:FC7F117407206811A187DD9CDF0E8C32, adobe:docid:photoshop:098673ac-7cc4-11dc-ad3b-f1997ba572cc, adobe:docid:photoshop:97024c2c-7cc5-11dc-ad3b-f1997ba572cc, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:17c1d98c-d263-11dc-8925-8ec683e345dd, adobe:docid:photoshop:5ae1da0f-0490-11dd-9b17-dab7ec7431e8, adobe:docid:photoshop:77c74a16-048c-11dd-9b17-dab7ec7431e8, adobe:docid:photoshop:619be47b-0083-11dc-9ac5-94316fee6bf9, adobe:docid:photoshop:b5f89ca7-8c97-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:35a6d405-8c98-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:4f8e2ee4-a12c-11da-8730-a29aa1e31bdd, adobe:docid:photoshop:6ecb7e40-d265-11dc-8925-8ec683e345dd, adobe:docid:photoshop:a47b924f-a12b-11da-8730-a29aa1e31bdd, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:8af23eac-d98a-11d9-a4c3-d66ecbfe4582, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:14d8e08f-d98a-11d9-a4c3-d66ecbfe4582, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:9142a115-19e2-11de-ac99-d3cfbced3021, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:8460ecb0-7fac-11dc-b2e7-da55fa350790, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:FA7F11740720681197A5C726C870D543, xmp.did:FE7F11740720681197A5C726C870D543, xmp.did:FF7F11740720681197A5C726C870D543, xmp.did:FB7F11740720681197A5C726C870D543, xmp.did:FA7F11740720681197A5C726C870D543, xmp.did:FE7F11740720681197A5C726C870D543, xmp.did:FF7F11740720681197A5C726C870D543, xmp.did:FD7F11740720681197A5C726C870D543, xmp.did:FB7F11740720681197A5C726C870D543, xmp.did:F97F11740720681197A5C726C870D543, xmp.did:FD7F11740720681197A5C726C870D543, adobe:docid:photoshop:12e26b82-7e53-11dc-ac2d-f7d6ac67d1ea, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:F97F11740720681197A5C726C870D543, xmp.did:FC7F11740720681197A5C726C870D543, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:d8a5d09c-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:d8a5d09a-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:d8a5d09d-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:d8a5d09f-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:d8a5d09e-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:d8a5d09b-7f18-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:0f28c0ee-7eec-11dc-97b0-c1e6d7e0e89e, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:b377ebdb-f591-11db-9141-9a525b0ecaac, adobe:docid:photoshop:f3257dee-78e1-11dc-9b2e-8cf0845db66c, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:38c7c9a6-aea4-11db-8ec0-9a5f78c15505, adobe:docid:photoshop:1e4bb827-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1e4bb82e-7271-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:bbb87446-30cb-11da-aff1-862ad0e65fe0, adobe:docid:photoshop:081b3bca-7332-11dc-a55b-eea5e129e787, xmp.did:FB7F11740720681185308812B7F26359, xmp.did:24C8BA801F2068118DBBB9FCC29A16EA, adobe:docid:photoshop:38c7c9a6-aea4-11db-8ec0-9a5f78c15505, xmp.did:008011740720681185308812B7F26359, xmp.did:24C8BA801F2068118DBBB9FCC29A16EA, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:14a6ae43-740d-11dc-9700-ca999010a7ba, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:4aaf9df6-1237-11da-be8d-b953865d7c6c, adobe:docid:photoshop:5b01340f-f6a7-11d9-bdb9-be2abf216471, adobe:docid:photoshop:0f4ca283-7420-11dc-9700-ca999010a7ba, adobe:docid:photoshop:5b013410-f6a7-11d9-bdb9-be2abf216471, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:4861af64-771b-11dc-a7d2-d731f6a22abc, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, xmp.did:F97F117407206811A3B7C46DB22A4042, adobe:docid:photoshop:4cb12b0c-7730-11dc-a7d2-d731f6a22abc, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:ccafcdb6-8e92-11dc-9cda-e9a86ea32fcc, adobe:docid:photoshop:b1a1b806-f54d-11d9-a559-9535c94e62c1, adobe:docid:photoshop:50330d98-f2a5-11d9-98a6-966a2a18a7fd, adobe:docid:photoshop:5cac9ebb-25cc-11da-be9f-d5612ad32f4b, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:b589ded4-8208-11dc-9639-aa18168df8ab, adobe:docid:photoshop:31ea651c-82cf-11dc-9ccf-dfd0e6b2eb9e, adobe:docid:photoshop:b589ded4-8208-11dc-9639-aa18168df8ab, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:F87F1174072068119E6A9B94A62517ED, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:081b3bd1-7332-11dc-a55b-eea5e129e787, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:8f4f76fe-8513-11da-833e-fc99a17a3d87, xmp.did:675D668428206811A110EF2FA505F80B, adobe:docid:photoshop:ccafcdb6-8e92-11dc-9cda-e9a86ea32fcc, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, xmp.did:36A856E00A20681197A5C726C870D543, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:8808435b-afb1-11dc-a1f4-865425d3677c, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:0313d117-afd8-11dc-a1f4-865425d3677c, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:5bbf6892-afd8-11dc-a1f4-865425d3677c, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:0313d11e-afd8-11dc-a1f4-865425d3677c, adobe:docid:photoshop:63b67459-941f-11dc-991a-bfa70d73a9fd, adobe:docid:photoshop:01994acf-d191-11dc-a167-f0583464fcc6, adobe:docid:photoshop:d23da050-8f96-11dc-82b2-89a50880acec, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:31ea651c-82cf-11dc-9ccf-dfd0e6b2eb9e, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:14d8e08f-d98a-11d9-a4c3-d66ecbfe4582, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:F97F11740720681197A5C726C870D543, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0b00e55c-16d9-11da-859d-e7c1db518761, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:041f78e3-164d-11da-9fd0-afc466c03d0b, adobe:docid:photoshop:7e5809bb-9ee4-11da-b01b-b98c62e93d09, adobe:docid:photoshop:b0feef03-8c92-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:e26dc9ff-8c95-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:e26dc9ff-8c95-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:e26dc9ff-8c95-11d8-90f7-d1f422b54ad6, adobe:docid:photoshop:e18bd785-8c96-11d8-90f7-d1f422b54ad6, xmp.did:F77F117407206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:fb95cdc3-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:fb95cdbf-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7490e446-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:66e4c970-7d78-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7490e43f-7d77-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:c706c108-7d78-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:9d31e440-7cb6-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, xmp.did:0F7EE7260E206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:25b6e428-7d80-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:3bcc879d-7d82-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:8546a15a-a584-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:03b996cd-a584-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:89a3a70b-a583-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:3428ed33-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:e75bcc31-7cc7-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:19e96b90-a582-11dc-bd1e-907773d0b13c, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:52f1d879-7d81-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, xmp.did:018011740720681185538949193C7FE0, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:e3a8370e-7dc4-11dc-ba00-f7cc96a826aa, adobe:docid:photoshop:7f577b3d-a8d3-11d8-a2b5-e13b76e29dea, adobe:docid:photoshop:28f0b238-7ccb-11dc-9e4b-f06a8a2dd257, xmp.did:F77F11740720681186E0904F47EAA708, adobe:docid:photoshop:52f1d879-7d81-11dc-9e03-cb5856fd8286, xmp.did:078011740720681185538949193C7FE0, xmp.did:FE5FA7D11C20681185538949193C7FE0, xmp.did:6A5D668428206811A110EF2FA505F80B, xmp.did:2A3C22E738206811A110EF2FA505F80B, adobe:docid:photoshop:3428ed2e-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:3428ed2e-7d79-11dc-9e03-cb5856fd8286, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:13912fe4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:9ee128f4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:6ed90949-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:01016329-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:319e2fa4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:c4b77f9d-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:ca67f2c5-2b41-11da-9405-f75a0af6dee0, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:0180117407206811900280811F259D21, xmp.did:018011740720681195FEE3ACEB3419BA, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:13912fe4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:9ee128f4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:6ed90949-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:01016329-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:319e2fa4-2b42-11da-9405-f75a0af6dee0, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, xmp.did:36A856E00A20681197A5C726C870D543, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:137EE7260E206811AB1495435AFD43C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:aedf2618-7715-11dc-a7d2-d731f6a22abc, adobe:docid:photoshop:9d31e438-7cb6-11dc-9e4b-f06a8a2dd257, adobe:docid:photoshop:f75b949c-a656-11dc-87cc-c950b26ac00b, adobe:docid:photoshop:04b7cf1b-a659-11dc-87cc-c950b26ac00b, adobe:docid:photoshop:bec1c18b-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:ff5869e4-17b6-11da-b108-d8e2e5314774, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:F77F1174072068118E3886301452B1C8, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:04cef623-b06c-11dc-a635-932fba85ce68, adobe:docid:photoshop:04cef62a-b06c-11dc-a635-932fba85ce68, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:041f78e3-164d-11da-9fd0-afc466c03d0b, adobe:docid:photoshop:3cb02b82-a893-11dc-8837-9a6948e08d6c, adobe:docid:photoshop:7e5809bb-9ee4-11da-b01b-b98c62e93d09, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:81bd7f0f-b092-11dc-a635-932fba85ce68, adobe:docid:photoshop:81bd7f16-b092-11dc-a635-932fba85ce68, adobe:docid:photoshop:81bd7f0f-b092-11dc-a635-932fba85ce68, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:f0a87e60-f103-11dc-ba5b-817a56aa0218, adobe:docid:photoshop:fe847323-f114-11dc-ba5b-817a56aa0218, adobe:docid:photoshop:2ae3088c-f115-11dc-ba5b-817a56aa0218, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:e557e9d9-3c90-11da-8504-ce12eddcdad9, adobe:docid:photoshop:2ae3088c-f115-11dc-ba5b-817a56aa0218, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:93f4e259-82db-11dc-9ccf-dfd0e6b2eb9e, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:3bf5ccd6-9039-11dc-bcb6-dbda147b7ba1, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:f376b7fa-9031-11dc-bcb6-dbda147b7ba1, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:F77F117407206811AA54AA1F6DC2249C, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:1eb78914-15f5-11de-9f44-fc5a211a0338, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:fd12a971-af92-11dc-a1f4-865425d3677c, xmp.did:B82E1B8B10206811B787C32755CC39EC, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:d915e422-82d3-11dc-9ccf-dfd0e6b2eb9e, adobe:docid:photoshop:a1470f35-b062-11dc-a635-932fba85ce68, adobe:docid:photoshop:5cac9ebb-25cc-11da-be9f-d5612ad32f4b, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:b589ded4-8208-11dc-9639-aa18168df8ab, adobe:docid:photoshop:31ea651c-82cf-11dc-9ccf-dfd0e6b2eb9e, adobe:docid:photoshop:b589ded4-8208-11dc-9639-aa18168df8ab, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:b48c047a-b137-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:dc425a8f-b136-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:863da915-4618-11da-bbc5-cb6a1b9e709f, adobe:docid:photoshop:ce24c91d-b12d-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:b48c047a-b137-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:f032d767-b09b-11dc-a635-932fba85ce68, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, xmp.did:FA7F1174072068119528C66927AA9E92, xmp.did:00801174072068119528C66927AA9E92, xmp.did:B3BAD27E0A2068119528C66927AA9E92, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:b6f37bc6-5695-11da-afc2-bd824ff38a70, adobe:docid:photoshop:943d430d-5695-11da-afc2-bd824ff38a70, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:F77F1174072068119528C66927AA9E92, xmp.did:00801174072068119528C66927AA9E92, xmp.did:BABAD27E0A2068119528C66927AA9E92, xmp.did:F1D9A2930E2068119528C66927AA9E92, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:675d8886-b557-11dc-aacd-d54e2da6c6f3, adobe:docid:photoshop:d3dd91e4-b548-11dc-aacd-d54e2da6c6f3, xmp.did:0280117407206811AA8CA6F8B46B9EE1, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:0480117407206811AA8CA6F8B46B9EE1, xmp.did:0880117407206811AA8CA6F8B46B9EE1, adobe:docid:photoshop:bec1c192-74b8-11dc-860f-f1ec5fb9cfa7, xmp.did:0A80117407206811AA8CA6F8B46B9EE1, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:675d888d-b557-11dc-aacd-d54e2da6c6f3, adobe:docid:photoshop:2c08bb6f-b55b-11dc-aacd-d54e2da6c6f3, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, xmp.did:0180117407206811AA8CA6F8B46B9EE1, xmp.did:0680117407206811AA8CA6F8B46B9EE1, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:f26517e2-b161-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:fe3b391f-b139-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:3438e876-4700-11da-98d3-e5b7a65b8d2f, adobe:docid:photoshop:761e256b-b51a-11dc-aacd-d54e2da6c6f3, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:6cb2b095-4700-11da-98d3-e5b7a65b8d2f, adobe:docid:photoshop:109704aa-56be-11da-afc2-bd824ff38a70, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:ceb16945-b169-11dc-bbf4-f4625a6a091b, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:caa7bbdc-1fce-11db-998a-8e6956cb1152, adobe:docid:photoshop:1ffab500-6ef4-11da-b917-d570093000b1, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:caa7bbdc-1fce-11db-998a-8e6956cb1152, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:2eecb32d-7c15-11dd-93e9-8c2eb41ff004, adobe:docid:photoshop:f92a2879-7c09-11dd-93e9-8c2eb41ff004, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:7d7cd99d-7c17-11dd-93e9-8c2eb41ff004, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, uuid:067483EF5A19DD119A24F36A448A6681, adobe:docid:photoshop:4dc66586-0283-11dd-a1a6-be1982a286af, adobe:docid:photoshop:b1ba9db6-028a-11dd-a1a6-be1982a286af, adobe:docid:photoshop:4dc66584-0283-11dd-a1a6-be1982a286af, xmp.did:6581A8D721206811815DC9970D117B65, xmp.did:04FFA4AB3B206811815DC9970D117B65, uuid:943C68B55B19DD119A24F36A448A6681, uuid:8F3C68B55B19DD119A24F36A448A6681, uuid:CCB632865B19DD119A24F36A448A6681, xmp.did:FFFE9D6143206811815DC9970D117B65, uuid:5CE4FB9E5B19DD119A24F36A448A6681, uuid:7F63D5795B19DD119A24F36A448A6681, adobe:docid:photoshop:97edf9cd-027e-11dd-a1a6-be1982a286af, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:1ffab500-6ef4-11da-b917-d570093000b1, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:e71ac256-061e-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:e71ac257-061e-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:be51195d-061a-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:78d6ec9e-dc99-11dc-8d8a-8fd4be834d4a, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:f9bb1461-dca2-11dc-8d8a-8fd4be834d4a, adobe:docid:photoshop:7797a286-a054-11da-872b-f428ee2ac5fc, adobe:docid:photoshop:268f5b3f-6ef4-11da-b917-d570093000b1, adobe:docid:photoshop:29b2908d-dca0-11dc-8d8a-8fd4be834d4a, adobe:docid:photoshop:9e2b49ff-dd47-11dc-a0a4-8ceeabb341d5, adobe:docid:photoshop:80ff75c7-dd4c-11dc-a0a4-8ceeabb341d5, adobe:docid:photoshop:268f5b3f-6ef4-11da-b917-d570093000b1, adobe:docid:photoshop:f2ead372-a054-11da-872b-f428ee2ac5fc, adobe:docid:photoshop:80ff75c3-dd4c-11dc-a0a4-8ceeabb341d5, adobe:docid:photoshop:0aa8dee0-060e-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:5c591872-dd59-11dc-a0a4-8ceeabb341d5, adobe:docid:photoshop:0aa8dee4-060e-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:4075f894-01f5-11dd-8680-9b7113458a3f, adobe:docid:photoshop:7ef1257a-1048-11dc-bae9-a126b237965e, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:95182c3b-77d4-11dc-bb7c-bbdac560fc4e, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:95182c3b-77d4-11dc-bb7c-bbdac560fc4e, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, adobe:docid:photoshop:eed7920b-e05a-11db-b599-c32a8843e706, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:78d6ec9e-dc99-11dc-8d8a-8fd4be834d4a, adobe:docid:photoshop:be51195d-061a-11dd-86fd-fbe946d3dc85, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:5d59895b-0341-11dd-9df4-bb8dffda276c, adobe:docid:photoshop:8d80c190-d47a-11d9-9859-e19e8b8f1f5d, xmp.did:F77F11740720681197A5C726C870D543, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:a8b82c1f-1d17-11dd-8060-9b1f38cc63d9, xmp.did:FA1FF1310B206811B13FD06576BB6D5B, xmp.did:F81FF1310B206811B13FD06576BB6D5B, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:2c52ed11-0189-11dd-8680-9b7113458a3f, adobe:docid:photoshop:2c52ed15-0189-11dd-8680-9b7113458a3f, adobe:docid:photoshop:0e73794e-0170-11dd-8680-9b7113458a3f, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:df699288-7265-11dc-99c5-f7b8015dbf23, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:3b8c5739-d4c0-11dc-b2b7-b7ef744af663, adobe:docid:photoshop:6ddda4d4-6d70-11da-aca9-8c2ca21df9cd, adobe:docid:photoshop:d564af41-0189-11dd-8680-9b7113458a3f, adobe:docid:photoshop:191ff3c1-00c5-11dd-80f2-c3af0edeb72a, adobe:docid:photoshop:cf4243aa-d4bd-11dc-b2b7-b7ef744af663, adobe:docid:photoshop:ebf8731a-00c3-11dd-80f2-c3af0edeb72a, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:ebf8731a-00c3-11dd-80f2-c3af0edeb72a, adobe:docid:photoshop:2aa2ee9a-d4bb-11dc-b2b7-b7ef744af663, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:6ddda4d4-6d70-11da-aca9-8c2ca21df9cd, adobe:docid:photoshop:25d4cd8d-d6f0-11dc-9854-bb579a886120, adobe:docid:photoshop:5a8cd406-d6f6-11dc-9854-bb579a886120, adobe:docid:photoshop:beca1ae2-d6f4-11dc-9854-bb579a886120, adobe:docid:photoshop:beca1ae2-d6f4-11dc-9854-bb579a886120, adobe:docid:photoshop:c88971ef-dae3-11dc-a72d-f4bac21a9db7, adobe:docid:photoshop:62078649-0165-11dd-8680-9b7113458a3f, adobe:docid:photoshop:6fb79356-d13f-11d9-9951-b80aceb361cb, adobe:docid:photoshop:0e543f1a-9c5c-11dd-88fa-82e3f7839386, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:87587165-d7c1-11dc-891b-c3e2ed367e49, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:87587165-d7c1-11dc-891b-c3e2ed367e49, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:87587169-d7c1-11dc-891b-c3e2ed367e49, adobe:docid:photoshop:f1529ff4-da14-11dc-a726-f9c987e8ac9e, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:f3364330-fae9-11db-99d2-b2dd32bcc61d, adobe:docid:photoshop:5e1efbf6-d7c7-11dc-891b-c3e2ed367e49 Warning : [Minor] Extracted only 1000 xmpMM:Manifest items. Ignore minor errors to extract all Doc Change Count : 418 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Layout : TwoPageRight Page Count : 660EXIF Metadata provided by EXIF.tools