108822 Catalog
2014-09-05
: Pdf 108822-Catalog 108822-Catalog 784610 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 660 [warning: Documents this large are best viewed by clicking the View PDF Link!]
HARTFORD
800-969-0285
BOSTON
800-645-6155
PHILADELPHIA
610-647-8070
WASHINGTON, D.C.
877-419-2755
NEFCO's fleet of trucks
provides prompt delivery
from Maine to Virginia.
With four strategically
located distribution centers,
your order is no more than
a phone call away
4 DISTRIBUTION CENTERS
NEFCO'S DELIVERY FLEET
MANAGED INVENTORY
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Quick Index
Fasteners
Anchors
Strut
Threaded Rod
Pipe Hangers
Tools
Abrasives
On Site Supplies
Safety
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Design
Engineering • Installation
to your specifications
In-Stock
Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
Fasteners
Quick Reference
SAMMY SUPER SCREW
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Bolts, Nuts, Washers
B7 Bolts / B7 Studs . . . . . . . 24
Belleville Washers . . . . . . . . 36
Bolts . . . . . . . . . . . . . . 18 - 26
Brass Hex Cap Screws / Nuts 53
Brass Nuts / Washers 53 - 55
Finished Hex Nuts . . . . . . . . 30
Flat Washers - USS/SAE
. . . . . . . . . . . . . . . 36 - 37, 39
Flat Washers - USS/SAE -
Heavy Gaskets . . . . . . . . 21, 23
Hex Bolts . . . . . . . . . . . 22 - 23
Hex Bolts B8 / B8M . . . . . . . 25
Hex Cap Screws Gr. 5 & 8 . . 27
Hex Nuts ...............31
Jam / Lock Nuts . . . . . . . . . . 32
Lock Washers /
Fender Washers . . . . . . 36 - 39
Nuts / Rod Coupling . . . . . . . 33
Plow Bolts / Waterworks Bolts 52
Stainless Steel
Hex Cap Screws . . . . . . 28 - 29
Stainless Steel Nuts . . . . . . . 34
Screws
Brass Machine Screws . 54 - 55
Brass Wood Screws . . . . . . . 56
Contractor / Specialty Screws 2 - 9
Drywall / Framing Screws 4 - 5
Machine Screws . . . . . . 42 - 46
Power Bits / Nut Setters. . . . 10
Roofing Fasteners / Screws 51
Round Combo
Machine Screws . . . . . . 40 - 41
Sammy Screws . . . . . . . 12 - 15
Stainless Screws. . . . . . 45 - 49
Stainless Steel Machine Screws
. . . . . . . . . . . . . . . . . . 45 - 46
Screws
Stainless Steel Sheet Metal Screws
. . . . . . . . . . . . . . . . . . . . . . 49
Security/Tamper Proof Screws 50
Self Drilling / Drywall Screws 5
Sheet Metal Screws . . . 47 - 49
Teks® / Acoustical Fasteners . . 7
Teks® / Self Drilling . . . . 2 - 5, 7
Vertigo®................16
Wall-Dog™ ..............15
Wood Working Screws . . . 8 - 9
OEM / Maintenance Fasteners
Heli-Coil................56
Hex Keys / Dowel Pins . . . . . 58
Hex Socket Screws. . . . . . . . 59
Managed Inventory System 57
Metric Fasteners . . . . . 60 - 61
Rivets .................63
Rivet Tools . . . . . . . . . . . . . . 62
Specialty Fasteners
Thread Inserts . . . . . . . . . . . 56
Structural Fasteners
A-325, A-490
Structural Bolts . . . . . . 20 - 21
Structural Washers. . . . . 21, 39
Stud Welding . . . . . . . . . . . . 19
Tension Control (TC) Bolts. . . 18
Technical Information
Bolting Basics. . . . . . . . . . . . 17
Fastener Identification Guide 35
Fastener ID Guide/Screw Points
. . . . . . . . . . . . . . . . . . . . . . 11
Flat Washer Dimensions . . . . 37
Buy American
Buy America
ARRA Compliant
Products
Available upon Request
MADE IN THE USA
Look for this symbol
in our catalog to
indicate products
that are available
domestically produced and are
ARRA Compliant!
2 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Screw Min. Min. Avg. Avg.
Dia. Tension Torsional Shear Pullout
6 1150 25 840 670
8 1575 42 1055 705
10 2100 61 1496 786
10 2350 65 1496 786
12 2800 92 2015 842
12 3250 100 2015 842
14 3850 150 2585 910
14 4275 168 2585 910
Hex Washer Head Self-Drilling
Screws
Attaches backup plates, fixtures,
door frames, and lathers channel to
structural studs and metal decks up
to 12 gauge.
• Ask about custom
painting capabilities
• Tested in 16 gauge
metal.
Self-Drilling Screw Specifications
Size Part No. Qty. Pt. No.
1/4 Hex
6 x 1/2 6N50THWZ 15000 2
6 x 3/4 6N75THWZ 10000 2
8 x 1/2 8N50THWZ 10000 2
1/4 Hex
8 x 5/8 8N62THWZ 10000 2
8 x 3/4 8N75THWZ 10000 2
8 x 1 8N100THWZ 7500 2
1/4 Hex
8 x 1-1/4 8N125THWZ 5000 2
8 x 1-1/2 8N150THWZ 5000 2
8 x 2 8N200THWZ 3000 2
5/16 Hex
10 x 1/2 10N50THWZ 10000 2
10 x 5/8 10N62THWZ 7500 3
10 x 3/4 10N75THWZ 7000 3
10 x 1 10N100THWZ 5000 3
10 x 1-1/4 10N125THWZ 3500 3
10 x 1-1/2 10N150THWZ 3000 3
10 x 2 10N200THWZ 2000 3
10 x 3 10N300THWZ 1500 3
12 x 3/4 12N75THWZ 5000 3
12 x 1 12N100THWZ 3500 3
12 x 1-1/4 12N125THWZ 3500 3
12 x 1-1/2 12N150THWZ 2500 3
12 x 2 12N200THWZ 2000 3
12 x 2-1/2 12N250THWZ 1000 3
12 x 3 12N300THWZ 1000 3
3/8 Hex
14 x 3/4 14N75THWZ 4000 3
14 x 1 14N100THWZ 3000 3
14 x 1-1/4 14N125THWZ 2000 3
14 x 1-1/2 14N150THWZ 2000 3
14 x 2 14N200THWZ 1000 3
14 x 2-1/2 14N250THWZ 1000 3
14 x 3 14N300THWZ 1000 3
14 x 4 14N400THWZ 500 3
14 x 5 14N500THWZ 500 3
HVAC / Sheet Metal
Electrical
Accessories
Insert Bit Holders
Size O.L. Part No.
1/4 x 3" 25D300MBH
2 x 1" 2N100PIB
Phillips Insert Bit
1/4 x 3"
#2 x 1"
Best Selling Items...
Pan Framing TEKS®
Pan Framing Sharp
Point
7 x 7/16
7 x 7/16
Size Part No. Qty.
7 x 7/16 7N43TPF 15M
7 x 7/16 7N43PFS 15M
Wafer K-Lath Modified
Truss TEKS®
Wafer K-Lath Modified
Truss - Sharp Point
8 x 1/2
Size Part No. Qty.
8 x 1/2 8N50TPKZ 10M
8 x 1/2 8N50DPKZ 10M
8 x 1/2
1/4" Hex Drive
Nut Setter -
Long
1/4 x 2-9/16"
5/16 x 2-9/16"
3/8 x 2-9/16"
Size O.L. Part No.
1/4 x 1-5/8" 25D162MNS
5/16 x 1-5/8" 31D162MNS
3/8 x 1-3/4" 37D175MNS
1/4 x 2-9/16" 25D256MNS
5/16 x 2-9/16" 31D256MNS
3/8 x 2-9/16" 37D256MNS
TEKS® / SELF DRILLING
Size Part No. Qty.
10 x 3/4 10N75THWZ 7M
8 x 3/4 8N75HWZ 10M
Hex
Washer
TEKS®
#3 Point
Hex Washer "Zip" Screws
8 x 3/4
10 x 3/4
High Hex
Washer
TEKS®
#3 Point
Hex
Washer
TEKS®
#2 Point
8 x 5/8
8 x 3/4
10 x 3/4
Size Part No. Qty.
10 x 3/4 HH1034 6.5M
8 x 5/8 8N62THWZ 10M
8 x 3/4 8N75THWZ 10M
1/4" Hex Drive
Nut Setter -
Short
1/4 x 1-5/8"
5/16 x 1-5/8"
3/8 x 1-3/4"
3
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Hex Washer Head
with
5/16” Drive
No. 4 Drilling Point
Heavy gauge metal fastening, sheet metal panels or clips
to steel up to 3/8” thick.
• 1,000 hour exterior all weather coating
Size Part No. Qty.
12 x 7/8 12N87TW4Z 4M
Wafer Plymetal Self
Drilling Screws with
Wings
For attaching plywood to metal. Wings prevent plywood
from climbing up the fastener.
Size Part No. Qty.
10 x 1-7/16 10N143TPWZ 3000
14 x 2-3/4 14N275TPWZ 3500
Phillips Flat Self Driller with Wings
For attaching wood to
heavy gauge metal.
• Up to 3/8”, great for
flooring and trailer bed applications.
Size Part No. Qty.
12 x 2 12N200TRWZ 2000
12 x 2-1/2 12N250TRWZ 1000
14 x 2-3/4 14N275TRWZ 1000
Hex Head Self
Drilling Screws -
No. 5
Use to drill up to 1/2 inch in steel.
Size Part No. Qty.
12 x 1-1/4 12C125TW5Z 2000
12 x 1-1/2 12C150TW5Z 2000
12 x 2 12C200TW5Z 2000
12 x 3 12C300TW5Z 2000
High-Hex Washer Head
with No. 3 Drilling Point
For penetrating multiple layers
of light steel - extra high hex for added strength. With
serrations to reduce spin out
Size Part No. Qty.
10 x 3/4 HH1034 6.5M
Stitch Lap Tek Hex
Washer
Self Drilling Screw
Specifically designed to help
pull together sheet metal along seams and joints.
Size Part No. Qty.
14 x 7/8 14N87TSHZ 3500
14 x 7/8 14N87TSHZ/NEOB w/washer 3500
410 Stainless Steel
Self Drilling Screws
Available with pre-
assembled stainless
neoprene bonded sealing washer for exterior metal
to metal applications that require a large degree of
corrosion resistance.
Hex Washer Head
Size Part No. Qty.
1/4 Hex
8 x 1/2 8N50THW4 10000
8 x 5/8 8N62THW4 10000
8 x 3/4 8N75THW4 10000
8 x 1 8N100THW4 7500
8 x 1-1/4 8N125THW4 6000
8 x 1-1/2 8N150THW4 5000
5/16 Hex
10 x 1/2 10N50THW4 10000
10 x 5/8 10N62THW4 8000
10 x 3/4 10N75THW4 7000
5/16 Hex
10 x 1 10N100THW4 5000
10 x 1-1/4 10N125THW4 4000
10 x 1-1/2 10N150THW4 3000
10 x 2 10N200THW4 2000
12 x 3/4 12N75THW4 5000
12 X 1 12N100THW4 3500
12 x 1-1/4 12N125THW4 3000
12 x 1-1/2 12N150THW4 2500
12 X 2 12N200THW4 2000
12 x 2-1/2 12N250THW4 1500
12 x 3 12N300THW4 1000
3/8 Hex
14 x 3/4 14N75THW4 3500
14 x 1 14N100THW4 2500
14 x 1-1/2 14N150THW4 2000
14 x 2 14N200THW4 1500
14 x 2-1/2 14N250THW4 1000
14 x 3 14N300THW4 1000
Bugle Head Pilot
Point
For attaching up to 3/4”
plywood to 20-14 gauge metal. Combo drive. 1,000 hour
exterior all weather coating.
Size Part No. Qty.
8 x 2 PP2 4M
Flat Head Pilot Point
For attaching up to 1-1/8”
plywood to 18-12 gauge
metal.
• Combo drive, 1,000 hour exterior all weather coating.
Size Part No. Qty.
10 x 2-1/2 PP212 2M
TEKS® / SELF DRILLING
4 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Wafer Plymetal
Self Drilling Screws
For attaching plywood to metal
with .220 maximum thickness.
Size Part No. Qty.
10 x 3/4 10N75TWPZ 800
10 x 1 10N100TWPZ 5000
10 x 1-1/4 10N125TWPZ 4000
10 x 1-7/16 10N143TWPZ 3500
10 x 1-1/2 10N150TWPZ 4000
Floorboard Torx® Screws
The unique thread-forming screw
designed specifically for the truck
trailer industry.
Size Part No. Pilot Qty. Driver
1/4 x 1-1/4 25C125FTS 7/32 3000 T-30
1/4 x 2 25C200FTS 7/32 1800 T-30
1/4 x 2-1/4 25C225FTS 7/32 1400 T-30
1/4 x 2-1/2 25C250FTS 7/32 1200 T-30
1/4 x 3-1/2 25C350FTS 7/32 800 T-30
5/16 x 2-1/2 31C250FTS 5/16 800 T-40
Pan Framing Sharp Point
For attaching steel studs to steel
track up to 20 gauge. Sometimes
called peanuts or blackies.
Size Part No. Qty.
6 x 7/16 6N43PFS 15000
7 x 7/16 7N43PFS 15000
Pan Framing
Self Drilling Screws
For attaching steel track to 14-20
gauge metal studs. Sometimes called peanuts or blackies.
Size Part No. Qty.
6 x 7/16 6N43TPF 15000
7 x 7/16 7N43TPF 15000
8 x 1/2 8N50TPF 10000
Wafer K-Lath
Modified Truss
Sharp Point
For metal lath or K-lath to metal studs 20 to 25 gauge.
• Zinc plated - Phillips Recess
• Also available in Plain Finish
Size Part No. Qty.
8 x 1/2 8N50DPKZ 10000
8 x 9/16 8N56DPKZ 10000
8 x 3/4 8N75DPKZ 8000
8 x 1 8N100DPKZ 5000
8 x 1-1/4 8N125DPKZ 500
8 x 1-5/8 8N162DPKZ 4000
8 x 2 8N200DPKZ 2000
"Zip" Screws
Self Piercing
(Slotted) Hex
Washer Head Needle Point Screws
Used in light metal assembly such as electrical outlets,
framing, and various other sheet metal applications.
• Slotted head - Zinc plated
Size Part No. Qty.
1/4 Hex
8 x 1/2 8N50HWZ 15000
8 x 3/4 8N75HWZ 10000
8 x 1 8N100HWZ 7500
8 x 1-1/4 8N125HWZ 6000
8 x 1-1/2 8N150HWZ 5000
8 x 2 8N200HWZ 3000
1/4 or 5/16 Hex, Please Specify
10 x 1/2 10N50HWZ 14000
10 x 3/4 10N75HWZ 7500
10 x 1 10N100HWZ 5000
10 x 1-1/2 10N150HWZ 3000
10 x 2 10N200HWZ 2000
Wafer K-Lath
Modified Truss
Self Drilling Screws
For mounting metal lath to
heavy gauge (14-20) metal studs.
Size Part No. Qty.
8 x 1/2 8N50TPKZ 10000
8 x 1 8N100TPKZ 8000
8 x 1-1/4 8N125TPKZ 6000
8 x 1-5/8 8N162TPKZ 4000
Low Profile Truss
Self Drilling Screws
Low profile 20-16 gauge
framer. No. 10 diameter for added shear strength. With
serrations to reduce spin out.
• No. 2 Reduced Phillips Recess
Size Part No. Qty.
10 x 1/2 FT1012 8.5 M
10 x 3/4 FT1034 7.5 M
Pancake Framer
Self Drilling Screws
For attaching 20-14 gauge
steel track to 20-16 gauge
steel studs.
• No. 2 Reduced Phillips Recess
Size Part No. Qty.
10 x 5/8 PPH1058 7.5 M
DRYWALL / FRAMING SCREWS
5
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Zinc Plated
For attaching steel
strapping (bridging) of
furring channel to steel joist.
Size Part No. Qty. Pt. No. Drill Cap.
#6 Dia.
6 x 3/8 6N37TPPZ 15000 2 .104
6 x 1/2 6N50TPPZ 15000 2 .104
6 x 3/4 6N75TPPZ 10000 2 .104
6 x 1 6N100TPPZ 10000 2 .104
8 x 1/2 8N50TPPZ 10000 2 .104
8 x 5/8 8N62TPPZ 10000 2 .104
8 x 3/4 8N75TPPZ 10000 2 .104
8 x 1 8N100TPPZ 7500 2 .104
8 x 1-1/4 8N125TPPZ 5000 2 .104
8 x 1-1/2 8N150TPPZ 5000 2 .104
#10 Dia.
10 x 1/2 10N50TPPZ 10000 2 .110
10 x 5/8 10N62TPPZ 8000 3 .179
10 x 3/4 10N75TPPZ 7500 3 .179
10 x 12 10N100TPPZ 5000 3 .179
10 x 1-1/4 10N125TPPZ 3500 3 .179
10 x 1-1/2 10N150TPPZ 3000 3 .179
410 Stainless Steel
For exterior metal to metal
applications that require a
large degree of corrosion
resistance.
Size Part No. Qty.
1/4 Dia.
8 x 1/2 8N50TPP4 10000
8 x 3/4 8N75TPP4 10000
8 x 1 8N100TPP4 7500
8 x 1-1/2 8N150TPP4 5000
5/16 Dia.
10 x 1/2 10N50TPP4 10000
10 x 3/4 10N75TPP4 7000
10 x 1 10N100TPP4 5000
10 x 1-1/4 10N125TPP4 4000
Trim Head
Sharp Point
For attaching wood trim
and base to metal studs.
Size Part No. Qty.
#6 Dia.
6 x 1 6N100DTS 10000
6 x 1-5/8 6N162DTS 5000
6 x 2-1/4 6N225DTS 3000
#8 Dia.
8 x 3 8N300DTS 2000
Pan Head Phillips Self Drilling Screws
Coarse Thread
Original and primary
application of drywall to
wood studs - also used in
many interior wood and fixture fastening applications.
Size Part No. Qty.
#6 Dia.
6 x 1 6N100DRC 10000
6 x 1-1/8 6N112DRC 8000
6 x 1-1/4 6N125DRC 6000
6 x 1-1/2 6N150DRC 6000
6 x 1-5/8 6N162DRC 5000
6 x 1-3/4 6N175DRC 4000
6 x 2 6N200DRC 3500
6 x 2-1/4 6N225DRC 3000
#8 Dia.
8 x 2-1/2 8N250DRC 2500
8 x 3 8N300DRC 2000
Laminating Screw
A temporary fastener for
joining drywall to drywall.
Size Part No. Qty.
10 x 1-1/2 10N150LAS 5000
Fine Thread
Twin lead point for
high holding power
and fast penetration -
available in black phosphate multi-purpose screw used for
fastening drywall to 20 - 25 gauge metal studs.
• Phillips Recess
Size Part No. Qty.
#6 Dia.
6 x 1 6N100DRF 10000
6 x 1-1/8 6N112DRF 10000
6 x 1-1/4 6N125DRF 8000
6 x 1-5/8 6N162DRF 5000
6 x 2 6N200DRF 3500
6 x 2-1/4 6N225DRF 3000
#8 Dia.
8 x 2-1/2 8N250DRF 2500
8 x 3 8N300DRF 2000
#10 Dia.
10 x 3-1/2 10N350DRF 1500
10 x 3-1/2 10N375DRF 1500
10 x 4 10N400DRF 1500
10 x 4-1/2 10N450DRF 1500
10 x 5 10N500DRF 1000
SELF DRILLING / DRYWALL SCREWS
Bugle Head Drywall Screws
6 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Wood Trim Over
Gypsum to 20 -
14 Gauge Metal
For attaching wood trim over gypsum to 20 - 14 gauge
metal.
• No. 1 or 2 Square Recess
• Available in Zinc and Black Phosphate Finish
Size Part No. Qty.
6 x 1-5/8 THD2158 5M
6 x 2-1/4 THDZ214 3M
8 x 3 THDZ3 2M
6 x 1-5/8 THD158* 5M
6 x 2-1/4 THD214* 3M
8 x 3 THD3* 2M
* Black Phosphate Finish
Trim Head Self Drilling Screws
Used for attaching wood trim
or base to 14 - 20 gauge metal
studs.
Size Part No. Qty.
6 x 1 6N100TTSZ 10000
6 x 1-5/8 6N162TTSZ 5000
6 x 2-1/4 6N225TTSZ 3000
Trim Head
For attaching wood
trim and base
over gypsum board to light gauge steel studs or wood
substrate.
• No. 1 or 2 Square Recess
Size Part No. Qty.
6 x 1-5/8 TH158 5M
6 x 2-1/4 TH214 3M
8 x 3 TH3 2M
High and Low
Thread
For attaching drywall to light gauge steel studs and for
special applications requiring strip-out resistance.
• No. 2 Reduced Phillips Recess
Size Part No. Qty.
6 x 1 HL1 10M
6 x 1-1/8 HL118 10M
6 x 1-1/4 HL114 8M
6 x 1-5/8 HL158 5M
7 x 2 HL2 3.5M
7 x 2-1/4 HL214 3M
7 x 2-1/2 HL212 2.5M
8 x 3 HL3 2M
Bugle Head Self
Drilling Screws
Drill point provides easy cutting
and fast penetration used for fastening drywall to 14 - 20
gauge metal studs.
• Available in Zinc or Black Phosphate
Size Part No. Qty.
#8 Dia.
8 x 2-3/8 8N237TDS 3000
8 x 2-5/8 8N262TDS 2500
8 x 3 8N300TDS 2000
Not listed...?
Call us...It may be in stock
or we can order it!
CONTRACTOR / SPECIALTY SCREWS
Deck Screws
Dacro Coated
(Galvanized)
Use in fence, decks, wood
siding, gazebos, or any exposed
exterior application.
Stainless
For the best corrosion
resistance, use stainless
steel.
Size Part No. Qty.
#6 Dia., Galvanized
6 x 1 6N100DRCH 10000
6 x 1-1/4 6N125DRCH 8000
6 x 1-5/8 6N162DRCH 5000
2 6N200DRCH 3500
6 x 2-1/4 6N225DRCH 3000
#8 Dia., Galvanized
8 x 2-1/2 8N250DRCH 2500
8 x 3 8N300DRCH 1500
#10 Dia., Galvanized
10 x 3-1/2 10N350DRCH 1000
10 x 4 10N400DRCH 1000
Square Drive
7 x 2 (SQ) 7N200DMS/DACRO 3500
8 x 2-1/2 (SQ) 8N250DMS/DACRO 2500
8 x 3 (SQ) 8N300DMS/DACRO 2000
10 x 3-1/2 (SQ) 10N350DMS/DACRO 1500
Stainless
8 x 2-1/2 (SS) 8N250DCSS 2500
10 x 3 (SS) 10N300DCSS 1000
7
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Eye Lag Screws
Primarily used for
hanging suspended
ceiling grid into wood
joists.
Size Part No. Qty.
1/4 x 3 EL3 1 M
1/4 x 4 EL4 1 M
1/4 x 5 EL5 1 M
Self Drilling Eye
Lag Screws
Primarily used for
hanging suspended ceiling grid into metal studs.
Size Part No. Qty.
1/4 x 2 ELDZ2 1M
1/4 x 3 ELDZ3 1M
Tie-Wire Acoustical
Toggle
Toggle bolt assemblies are
used for suspended ceilings,
light fixtures, ductwork
and other fixtures to be wire strung from a hollow ceiling.
• Zinc Plated
• Spring loaded also available
Size Part No. Qty.
1/4-20 x 4-1/4 TB414 .800M
1/4-20 x 5 TB5 .800M
Size Part No. Qty.
1/4 - 20 Nominal Size and Threads
3/4 25C75ELB 100
1 25C100ELB 100
1-1/4 25C125ELB 100
1-1/2 25C150ELB 100
1-3/4 25C175ELB 100
2 25C200ELB 100
2-1/2 25C250ELB 100
3/8 - 16 Nominal Size and Threads
1 31C100ELB 50
1-1/4 31C125ELB 50
1-1/2 31C150ELB 50
1-3/4 31C175ELB 50
2 31C200ELB 50
2-1/2 31C250ELB 50
3 31C300ELB 50
1 37C100ELB 50
1-1/4 37C125ELB 50
1-1/2 37C150ELB 50
1-3/4 37C175ELB 50
2 37C200ELB 50
2-1/2 37C250ELB 50
3 37C300ELB 50
Elevator Bolts
Originally used for Grain Elevators. Can be used
anywhere that flush mounting is desirable. Standard
Plain Finish. Also Available in Zinc plated and with
various “Rib Neck” and “Saber Tooth” variations.
• Extra Large Wafer Head Square Neck - Low Carbon
Steel
Hex Washer Head
Self Drilling Screws
with Neoprene Bonded
Sealing Washer No. 3
Drilling Point
For attaching light gauge metal, metal siding, flashing,
etc. to steel structure. Pre-assembled Neoprene bonded
sealing washer keeps out moisture and prevents bleeding.
• Zinc Plated
Size Part No. Qty.
1/4 Hex
8 x 3/4 8N75TWN 7000
8 x 1 8N100TWN 5000
8 x 1/4 8N125TWN 4000
8 x 1-1/2 8N150TWN 3500
5/16 Hex
10 x 3/4 10N75TWN 5000
10 x 1 10N100TWN 4000
10 x 1/4 10N125TWN 3500
10 x 1-1/2 10N150TWN 3000
12 x 3/4 12N75TWN 3500
12 x 1 12N100TWN 3000
12 x 1-1/4 12N125TWN 3000
12 x 1-1/2 12N150TWN 2500
12 x 2 12N200TWN 1500
12 x 3 12N300TWN 1000
3/8 Hex
14 x 3/4 14N75TWN 3000
14 x 1 14N100TWN 2500
14 x 1/4 14N125TWN 2000
14 x 1/2 14N150TWN 2000
14 x 2 14N200TWN 1500
14 x 3 14N300TWN 1000
TEKS® / ACOUSTICAL FASTENERS
8 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Spade-Point w/Nibs
Designed to fasten cement
board to wood or light gauge
steel studs (25-20 gauge).
Nibs under the head allow it to countersink into the board.
The spade point penetrates the board without cracking and
high-low threads ensure high withdrawal resistance.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size Part No. Qty.
8 x 1-1/4 CB114 5M
8 x 1-5/8 CB158 5M
8 x 2 CB214 3M
Cement Board Screws
Wood Working Screws
Hardwood Screws
Also called “Face Frame
Screws” - used in hardwood cabinet and furniture making.
•Type 17 point
•Pan head Combo Drive
•Black phosphate
Size Part No. Qty.
6 x 1-1/4 PHC6114 6M
6 x 1-1/2 PHC6112 6M
Self-Drilling w/Nibs
Designed to fasten cement
board to metal studs (20-14
gauge). Nibs under the head allow it to countersink into
board.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size Part No. Qty.
8 x 1-1/4 CB114 5M
8 x 1-5/8 CB158 5M
For Wood
Designed to fasten fiber
cement board to wood.
Recommended for: Lap siding, fiber cement board to wood,
fiber cement rooting trim, flooring for tile in kitchen and bath.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
• Type 17 point
Size Part No. Qty.
8 x 1-1/4 FCBS114 8M
8 x 1-5/8 FCBS158 5M
For Steel
Designed to fasten
fiber cement board to
steel studs (0.100” max). Wings allow cutter head to
countersink flush with fiber cement board.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size Part No. Qty.
8 x 1-1/4 FCBS114 5M
8 x 1-5/8 FCBS158 5M
8 x 2-1/4 FCBS214 2.5M
For Wood in High
Wind
Designed to fasten fiber
cement board in areas requiring high wind shear and pull-
through resistance. Recommended for: Lap siding, fiber
cement board to steel studs, fiber cement roofing trim,
flooring for tile in kitchen and bath.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
• Type 17 point
Size Part No. Qty.
8 x 1-1/4 FCBSS114 8M
8 x 1-5/8 FCBSS158 5M
For Steel in High
Wind
Designed to fasten fiber
cement board in areas requiring high wind shear and pull-
through resistance (.100” max. steel stud). Recommended
for: Lap siding, fiber cement board to steel studs, fiber
cement roofing trim, flooring for tile in kitchen and bath.
• No. 2 Reduced Phillips Recess with ribs
• 1,000 hour exterior all weather coating
Size Part No. Qty.
8 x 1-1/4 FCBD114 5M
8 x 1-5/8 FCBD158 5M
8 x 2-1/4 FCBD214 3M
Fiber Cement Board Screws
Cabinet Screws
Use for attaching cabinets
to wood or light gauge (25 - 20 gauge) steel studs. Combo
drive allows fasteners to remain on bit while cabinet is held
in place for attachment.
• Yellow Zinc Finish
• Type 17 point
Size Part No. Qty.
8 x 2-3/8 CBS238 2.5M
8 x 3 CBS300 2M
CONTRACTOR / SPECIALTY SCREWS
9
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Wood Working Screws
Tool Repair
NEFCO offers tool repair on many makes and brands
and tool rental on name-brand items from Greenlee,
Ridgid, and Milwaukee.
WOODWORKING SCREWS
Use Flat or Oval Round Head Flat Oval Round Head Truss Brazier Flat, Oval, Round,
This Head Wood Binding Fillister Button Head Stove and Binding
Bit Size Wood Screws Screws Wood Screws Screws Machine Screws Sheet Metal
0 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1
1 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4,5 2, 3, 4 2, 3, 4
2 5, 6, 7, 8, 9 5, 6, 7, 8, 9, 10 5, 6, 8, 10 5, 6, 8, 10 6, 8, 10 5, 6, 7, 8, 10
3 10, 12, 14, 16 12, 14, 16 12, 1/4 12, 1/4, 5/16 12, 1/4 12, 14
4 18, 20, 24 18, 20, 24 5/16, 3/8, 7/16, 1/2 3/8, 7/16, 1/2 5/16, 3/8, 7/16, 1/2
Particle Board
Screws
An all around wood to wood product screw for building
cabinets, furniture, etc., where smooth counter-sinking via
the nibbled head and the anti-splitting action of the Type
17 point are needed. Can also be used to attach wood to
wood products to light gauge steel (25-20 gauge).
•Type 17 point
• Combo Drive with nibs
• Zinc plated
Size Part No. Qty.
8 x 1-1/4 PBPO8114 6M
8 x 1-1/2 PBPO8112 5M
8 x 1-5/8 PBPO8158 5M
8 x 2 PBPO8200 3M
8 x 2-1/2 PBPO8212 2.5M
8 x 3 PBPO8300 2M
Coarse Screws
Use for attaching wood
to wood. Recommended for cabinet and general wood-
working where the gold/yellow head meets user’s cosmetic
requirements, an interior fastener not recommended for
outdoor decking.
• Bugle head No. 2 Reduced Phillips Recess
• Yellow zinc
Size Part No. Qty.
6 x 1-1/4 GS114 8M
6 x 1-1/2 GS112 6M
6 x 1-5/8 GS158 5M
7 x 2 GS200 3.5M
7 x 2-1/4 GS214 3M
8 x 2-1/2 GS212 2.5M
8 x 3 GS300 2M
10 x 3-1/2 GS312 1M
10 x 3-3/4 GS334 1M
10 x 4 GS400 1M
Finding the Right Phillips Bit
• Match the size and type of screw with the proper bit size
10 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Not listed...?
Call us...It may be in stock
or we can order it!
POWER BITS / NUT SETTERS
Long
• Magnetic
Hex Size Overall Length Part No.
3/16 2-9/16 18D256MNS
1/4 2-9/16 25D256MNS
1/4 6 25D600MNS
5/16 2-9/16 31D256MNS
5/16 3-3/16 31D318MNS
5/16 6 31D600MNS
3/8 2-9/16 37D256MNS
7/16 2-9/16 43D256MNS
Insert Bit Holders
• For 1/4" Hex Insert Bits
• Shank Size Standard 1/4" Hex Drive
Size Part No.
1/4 X 3 25D300MBH
1/4 X 4 25D400MBH
1/4 X 6 25D600MBH
1/4 X 6 25D800MBH
Phillips Power Bit
• 1/4" Hex Shank Insert Bits
Point Size Overall Length Part No.
1 1-15/16 1N193PPB
1 2-3/4 1N275PPB
1 3-1/2 1N350PPB
2 1-15/16 2N193PPB
2 2-3/4 2N275PPB
2 3-1/2 2N350PPB
2 6 2N600PPB
3 1-15/16 3N193PPB
3 2-3/4 3N275PPB
3 3-1/2 3N350PPB
Square Insert Bit
Point Size Overall Length Part No.
0 1 0NSQI
1 1 1N100SQI
1 1-15/16 1N193SPB
2 1 2N100SQI
2 1-15/16 2N193SPB
3 1-15/16 3N193SPB
3 3 3N100SQI
Torx® Bit
Point Size Overall Length Part No.
7 1 7N100TOB
8 1 8N100TOB
9 1 9N100TOB
10 1 10N100TOB
15 1 15N100TOB
20 1 20N100TOB
25 1 25N100TOB
27 1 27N100TOB
30 1 30N100TOB
40 1 40N100TOB
Short
• Magnetic
Hex Size Overall Length Part No.
3/16 1-5/8 18D162MNS
1/4 1-5/8 25D162MNS
5/16 1-5/8 31D162MNS
3/8 1-3/4 37D175MNS
7/16 1-3/4 43D175MNS
1/4" Hex Drive Nut Setters
Magnetic for Driving Hex Head
Self-Drilling Fasteners
1/4 Hex Insert Bits *Limited Clearance Bits
Phillips Insert Bit
Point Size Overall Length Part No.
0 1 0N100PIB
1 1 1N100PIB
1 1 1N100PIB/LC*
2 1 2N100PIB
2 1 2N100PIB/LC*
2 1-1/2 2N150PIB
2 2 2N200PIB
3 1 3N100PIB
11
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
see page 2-5 for Self Drilling Screws
Self-Tapping Screws - Steel - Zinc Plated
Thread Cutting Screws - Zinc Plated
Type Of Screw Points - Head Styles
Flat Square Type A
Pan Square Type A
Pan Combo Drive
Type A-AB
Flat Phillips Type A-AB
Oval Phillips Type A-AB
Pan Phillips Type A-AB
Truss Phillips Type A-AB
Flat Slotted Type A
Pan Slotted Type A-AB
Hex Unslotted Type A
Hex Washer Slotted
Type A-AB
Hex Washer Unslotted
Type A-AB
Hex Washer Slotted
Self-Piercing
Flat Phillips Type B
Pan Phillips Type B
Pan Slotted Type B
Hex Washer Slotted
Type B
Pan Phillips Type H-L
Hex Washer Unslotted
Type H-L
Flat Torx Type F
Pan Head Phillips Type 1
Hex Washer Slotted Type 1
Pan Slotted Type 23
Hex Washer Slotted
Type 23
Flat Phillips Type F
Pan Phillips Type F
Pan Slotted Type F
Pan Phillips Type 25
Hex Washer Slotted
Type F
Hex Washer Unslotted
Type F
Pan Phillips Type 23
Hex Washer Slotted
Type 25
Pan Slotted Type 25
Use this guide to help you identify the right fastener for your application.
FASTENER ID / SCREW GUIDE
General Thread
Appearance Type Description
A A thread forming screw for use in thin metals 0.015 - 0.050 thick. Used with drilled,
punched or nested holes in sheet metal, resin impregnated plywood, asbestos
combinations, among others. Not recommended for new design.
AB A thread forming screw for use with heavier metal 0.050-0.200 thick. The finer thread
pitch used with light and heavy sheet metal, non-ferrous castings, plastics, plywood,
asbestos combinations.
U A thread forming screw with high Helix thread for driving or hammering into sheet metal,
castings, fiber or plastics for permanent, quick assemblies.
F A thread cutting screw with machine screw thread having multi-cutting edges and chip
cavities. For use in heavy gauge, sheet metal, aluminum, zinc and lead die casting, cast
iron, brass and plastic.
BT 25 A thread cutting screw implementing a coarse Type B thread. Used with plastics and other
soft materials with large chip clearing and cutting edges.
T 23 A thread cutting screw with a fine thread offering maximum thread cutting area and
excellent chip clearing with minimum tightening torque.
Tri-lobular This thread rolling screw uses a tri-lobular design to cause the grains of the mating
material to reform to the thread contour rather than be sheared during tapping.
12 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAMMY® SCREWS
Speedy Products Specialty Screws
Threaded Rod Hangers
General Application & Uses
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
Features and Benefits
• Sidewinders are the side mount ver-
sions of the Sammys.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base Steel Purlins & Beams,
Materials: Wood, Concrete
• One system for all rod hanging ap-
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are self-
drilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjust-
able torque, battery-powered screw
gun or hammer drill.
SAMMY'S
Model GST Wood Vertical Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
GST .750 1/4" 1/4" x 3/4" #14 —
GST 100 1/4" 1/4" x 1" #14 —
GST 200 1/4" 1/4" x 2" #14 —
GST 300 1/4" 1/4" x 3" #14 —
GST 600 1/4" 1/4" x 6" #14 —
GST .75 3/8" 1/4" x 3/4" #14 —
GST 10 3/8" 1/4" x 1" #14 —
GST 20 3/8" 1/4" x 2" #14 UL, FM, NFPA
GST 25-380 3/8" 3/8" x 2-1/2" #14 UL, NFPA
GST 30 3/8" 1/4" x 3" #14 UL, FM, NFPA
GST 40 3/8" 1/4" x 4" #14 NFPA
GST 60 3/8" 1/4" x 6" #14 NFPA
GST 2 1/2" 1/4" x 2" #14SW —
GST 2.5-380 1/2" 3/8" x 2-1/2" #14SW —
GST 3 1/2" 1/4" x 3" #14SW —
GST 4 1/2" 1/4" x 4" #14SW —
GST 6 1/2" 1/4" x 6" #14SW —
SAMMY'S Model DST, DSTR & TEK Steel Vertical Hangers
DST - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄
16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Packaged 25 per box.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
DSTR 100 1/4" 1/4-20 x 1" #14 —
DST 100 1/4" 1/4-14 x 1" #14 —
DST 150 1/4" 1/4-14 x 1-1/2" #14 —
DST 200 1/4" 1/4-14 x 2" #14 —
DST 250 1/4" 1/4-12 x 2-1/2" #14 —
DST 300 1/4" 1/4-14 x 3" #14 —
TEK 500 1/4" 12-24 x 1-1/2" #14 —
DSTR 1-1/2" 3/8" 12-24 x 1-1/2" #14 UL, FM, NFPA
DSTR 1" 3/8" 1/4-20 x 1" #14 UL, FM, NFPA
DSTR 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
DST 10 3/8" 1/4-14 x 1" #14 NFPA
DST 15 3/8" 1/4-12 x 1-1/2" #14 NFPA
DST 20 3/8" 1/4-14 x 2" #14 NFPA
DST 25 3/8" 1/4-14 x 2-1/2" #14 NFPA
DST 30 3/8" 1/4-14 x 3" #14 NFPA
DST 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
TEK 50 3/8" 12-24 x 1-1/2" #14 FM, NFPA
DST 2.0 1/2" 1/4-14 x 2" #14SW —
DST 2.5 1/2" 1/4-14 x 2-1/2" #14SW —
DSTR 1.0 1/2" 1/4-20 x 1" #14SW —
DSTR 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
DST 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
TEK 5.0 1/2" 12-24 x 1-1/2" #14SW —
SAMMY'S
Model CST Concrete Vertical Hangers
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
CST 200 1/4" 5/16" x 1-1/2" #14 —
CST 20 3/8" 5/16" x 1-1/2" #14 FM
CST 2 1/2" 5/16" x 1-1/2" #14SW —
SAMMY'S
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty status.
Please see page 97 for complete ordering
information
Vertical Applications
13
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SAMMY® SCREWS
Sammys™ Sidewinders™
Threaded Rod Anchors
SAMMY'S
Model SWG Wood SIDEWINDERS™ Hangers
Self-threading into wood. No pre-drilling required. 25/box
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
SWG 100 1/4" 1/4" x 1" #14SW —
SWG 200 1/4" 1/4" x 2" #14SW —
SWG 10 3/8" 1/4" x 1" #14SW —
SWG 20 3/8" 1/4" x 2" #14SW NFPA
SWG 25-380 3/8" 3/8" x 2-1/2" #14SW NFPA
SWG 30 3/8" 1/4" x 3" #14SW —
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Rod Screw Shank
Model No. Dia. Size & Length Approvals
SWD 10 1/4" 1/4-14 x 1" NFPA
SWD 15 1/4" 1/4-14 x 1-1/2" NFPA
SWD 20 1/4" 1/4-14 x 2 NFPA
SWD 516 3/8" 5/16-18 x 1-1/4" NFPA
SWDR 1-1/2" 3/8" 1/4-20 x 1" UL, NFPA
SWDR 1" 3/8" 1/4-20 x 1-1/2" UL, NFPA
SWDR 516 3/8" 5/16-18 x 1-1/4" UL, NFPA
SWT 15 3/8" 12-24 X 1-1/2" NFPA
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
8017925 1/2" 1/4" x 6" #14SW —
SWC 200 1/4" 5/16" x 1-1/2" #14SW —
SWC 20 3/8" 5/16" x 1-1/2" #14SW NFPA
Please see page 97 for complete ordering
information on all SAMMY's Products
SAMMY'S
Swivel Head™
Hangers
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-GST 20 Zinc Plated Steel 3/8" 1/4" x 2"
SH-GST 22SS Stainless Steel 3/8" 1/4" x 2"
SH-GST 30 Zinc Plated Steel 3/8" 1/4" x 3"
SH-GST 30SS Stainless Steel 3/8" 1/4" x 3"
8113910 #14 (Black) Nut Driver
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-DSTR 1 Zinc Plated Steel 3/8" 1/4" x 1"
SH-DSTR 1-SS Stainless Steel 3/8" 1/4" x 1"
8113910 #14 (Black) Nut Driver
For Wood and Concrete
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
Rod Screw Shank
Model No. Dia. Size & Length
SH-GST/CST 20 3/8" 1/4" x 1-3/4"
SH-GST/CST 2.0 1/2" 1/4" x 1-3/4"
8273910 #14SH Orange Nut Driver
89°
Deflection
From
Vertical
17°
Deflection
From
Vertical
17°
Deflection
From
Vertical
14 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAMMY® SCREWS
SAMMY XPress™ Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
XP 20 22-20 3/8" 1/4-20 x 1-1/8" UL, NFPA
XP 35 18-16 3/8" 1/4-20 x 1-1/8" UL, NFPA
UXPIT Sammy X-Press Universal Installation Tool
XPDB 25/34" Drill Bit
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
SWXP 16-12 3/8" 1/4-20 x 1-1/8" UL
UXPIT Sammy X-Press Universal Installation Tool
SAMMY XPress™ Sidewinder Hangers
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal at-
tachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Part Rod Pipe Test
No. Dia. Size Gauge Load
8294922 3/8" 3/4" - 2" 22 - 20 750 lbs.
8295922 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
8272957 1/2" 3/4" - 2" 22 - 20 750 lbs.
8271957 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
UXPIT Sammy X-Press Universal Installation Tool
Metal Deck, Min 22 ga.
Swivels up to 89°
SAMMY Xpress
installation sequence
SAMMY Xpress
Universal Tool
SAMMY'S
SH-TEK 50
Swivel Head™
Hangers
Tested to Zone 4 Seismic Requirements
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material en-
gagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod Screw Shank
Part No. Dia. Size & Length Approvals
8268957 3/8" 12-24 x 1-5/8" UL
8270957 1/2" 12-24 x 1-5/8" UL
8273910 #14SH Orange Nut Driver
15
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SCREW AND ANCHOR IN ONE!
Wall-Dog
• Wall-Dog® is installed right through fixture
into wallboard.
• Wall-Dog® installs quickly and easily with a
Phillips® screwdriver in wallboard, plywood,
concrete, hollow or grout filled block, brick and plaster.
• Patented thread design allows a Wall-Dog® to enter a
3/16” hole producing a one step anchor with superior
holding values.
Combo Hex Washer Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2265 1-1/4" Combo HWH Chrome 100
Robertson Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2266 1-1/4" Chrome Robertson Head 100
Phillips Oval Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2314 1-1/4" Zinc Oval Head 100
2328 1-1/4" White Oval Head 100
2388 1-1/4" Black Oval Head 100
2292 1-1/4" Brass Oval Head 100
Phillips Pan Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2316 1-1/4" Zinc Pan Head 100
2330 1-1/4" White Pan Head 100
2286 1-1/4" Black Pan Head 100
2294 1-1/4" Brass Pan Head 100
2273 1-1/2" White Pan Head 100
2274 1-1/2" Bronze Pan Head 100
2275 1-1/2" Zinc Pan Head 100
2276 1-1/2" Black Phosphate Pan Head 100
Phillips Wafer Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2277 1/4" x 1-1/2" White Wafer Head 100
2278 1/4" x 2" White Wafer Head 100
2279 1/4" x 2-1/4" White Wafer Head 100
2280 1/4" x 2-1/2" White Wafer Head 100
Wall-Dog™ Kits (includes 50 Chrome Pan Head Anchors)
Part No. Description
2316 Wall-Dog Kit with (1) Phillips Screwdriver
2330 Wall-Dog Kit with 3/16" straight shank bit
See page 107 in our Anchor Section
NEW
HEAD
STYLES
SAMMY'S INSTALLATION TOOLS / WALL DOG
Universal Installation Kit
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
Model No.
SPE139 Universal Installation Kit
SAMMY'S X-Press It®
Universal Installation Tool
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
Part No.
8194910 UXPIT Universal
X-Press It Tool
8195910 Retro Socket for
8151910 (Old Tool)
8152910 25/64" Drill Bit
Speedy Pole Tool™ & Socket
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Model No.
130 Speedy Pole Tool 6' (3' - 6')
131 Speedy Pole Tool 12' (4' - 12')
132 Speedy Pole Tool 18' (6' - 18')
133 Speedy Pole Tool 24' (8' - 24')
138 SAMMYS™ Socket Driver
3004 Ceiling Wire Socket Driver
SAMMY'S Nut Drivers
• #14 (Black) Nut Driver, for use with SAMMYS™
& Swivel Head™ SAMMYS™. (See individual
SAMMY'S Listing for correct Nut Driver).
Part No.
8113910 #14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with Sidewind-
ers and 1/2" rod SAMMY'S. (See individual
SAMMY'S Listing for correct Nut Driver).
Part No.
8114910 #14SW (Red) Nut Driver
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes into
contact with the material you are installing into, con-
tinue drilling until nut driver spins free. Installation is
then complete.
#14SW
#14
SAMMY'S INSTALLATION TOOLS
16 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VERTIGO®
Steel Vertical Hanger (#3 for Purlins, #5 for Beams)
Part Rod Screw Shank Point Self-Drilling Std
No. Dia. Size & Length Style Range Box
7155 1/4" 1/4"-20 x 1" #3 100
7157 3/8" 1/4"-20 x 2" #3 0.036" (20 ga.) 100
7158 3/8" 1/4"-20 x 1" (w/nut) #3 to 100
7159 3/8" 1/4"-20 x 1-1/2" #3 0.188" (3/16") 100
7160 3/8" 1/4"-20 x 1-1/2" (w/nut) #3 100
7152 1/4" 12-24 x 1-1/2" #5 0.188" (3/16") 100
7154 3/8" 12-24 x 1-1/2" (w/nut) #5 to 100
7161 1/2" 12-24 x 1-1/2" (w/nut) #5 0.5" (1/2") 100
Steel Side Hanger (#3 for Purlins, #5 for Beams)
Part Rod Screw Shank Point Self-Drilling Std
No. Dia. Size & Length Style Range Box
7183 1/4" 1/4"-20 x 1" #3 0.036" (20 ga.) 100
7184 3/8" 1/4"-20 x 1" (w/nut) #3 to 100
7186 3/8" 1/4"-20 x 1-1/2" #3 0.188" (3/16") 100
7188 3/8" 1/4"-20 x 1-1/2" (w/nut) #3 100
7200 1/4" 12-24 x 1-1/2" #5 0.188" (3/16") 100
7201 3/8" 12-24 x 1-1/2" (w/nut) #5 to 0.5" (1/2") 100
Wood Vertical Hanger
Part Rod Screw Shank Point Pre-Drilling Std
No. Dia. Size & Length Style Diameter Box
7163 1/4" 1/4" x 2" Type 17 100
7203 3/8" 1/4" x 1" Type 17 1/8" 100
7165 3/8" 1/4" x 2" Type 17 (if 100
7167 3/8" 1/4" x 3" Type 17 required) 100
7169 3/8" 1/4" x 4" Type 17 100
7162 3/8" 3/8" x 2-1/2" Type 17 1/8" (if 100
7164 1/2" 3/8" x 2-1/2" Type 17 required) 100
Wood Side Hanger
Part Rod Screw Shank Point Pre-Drilling Std
No. Dia. Size & Length Style Diameter Box
7185 1/4" 1/4" x 1" Type 17 100
7205 3/8" 1/4" x 1" Type 17 1/8" 100
7170 3/8" 1/4" x 2" Type 17 (if required) 100
7156 3/8" 1/4" x 2-1/2" Type 17 100
Concrete Vertical Hanger
Part Rod Screw Shank Point Pre-Drilling Std
No. Dia. Size & Length Style Diameter Box
7171 1/4" 1/4" x 1-1/4" Wedge 1/4" ANSI 100
7173 3/8" 1/4" x 1-1/2" Bolt 1/4" ANSI 100
7175 1/2" 3/8" x 2-3/4" OT 3/8" ANSI 50
Steel Vertical Hanger
Steel Side Hanger
Wood Vertical Hanger
Wood Side Hanger
Concrete Vertical Hanger
Vertigo™ Rod Hanging Systems
One System for all Rod Hanging Applications
One-piece, all-steel threaded fastening system for suspending
steel threaded rod vertically overhead in pipe-hanging, fire
protection, electrical conduit and cable tray applications.
Anchor Materials:
Zinc Plated Carbon Steel
Size Range:
¼" to ½" Threaded Rod
Suitable Base Materials:
Steel Purlins & Beams, Wood & Timber, Concrete, Hollow
Plank Concrete
Vertigo™ Installation Accessories
See page 98 in our Anchor
Section for complete
Vertigo Listings
Drive Sockets & Pole Tool
• 500 - 1500 RPM
• Universal socket color-coded Red,
concrete socket color-coded Blue.
• Pole Tool extends reach 6' to 12'.
Includes three Jaw Chuck
Part Std
No. Box
7187 Universal Steel &
Wood Socket 5
7195 1/4" Concrete Socket 5
7197 3/8" Concrete Socket 5
7198 1/2" Concrete Socket 5
7166 Pole Tool 1
Universal Steel
& Wood Socket
Concrete Socket
1/4", 3/8" or 1/2"
6' - 12' Pole Tool
Vertigo™ Tool Kit #5864
• Sleeve assembly, (same as cat. #
5874), 1/4" and 3/8" blue concrete
drive sockets and red universal drive
socket. (SDS Drill bit not included)
Additional Accessories
#5866 1/4" x 6" Hex Shank 1
SDS Drill Bit
#5874 Sleeve Assembly only 1
1/4" & 3/8" Blue Concrete Driver
Red Universal
Driver
Sleeve Assembly (5874)
17
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BOLTING BASICS
• Low Carbon Steel - General Purpose
• Standard Flange Bolt Material
• Finished Hex Head
• Flat Washer Low Carbon Steel
Low Carbon Finished Hex
Nuts Grade 2
Low Carbon Heavy Hex
Nuts
A242 Heavy Hex Nuts
Medium Carbon Grade 5
Finished or Heavy DH
Alloy Steel Grade 8
Heavy Hex High Strength
(A194) 2H or DH
Heavy Hex 2H High
Strength DH (A563)
Heavy Hex A194 2H
Finished Hex or Heavy
Finished Hex or Heavy Hex
A194 Grade 8
• Low Carbon Steel Flange Bolt
• Heavy Hex Head (A307B)
• Flat Washer Low Carbon Steel
• ASTM A242 (CORTEN) High Strength Low Alloy
• “T” Head Style for Water Works Applications
• Nut is included when ordering “T” Head Bolt
• Medium Carbon Steel - Heat Treated
• Applications are in maintenance (GR-5) and DOT Projects
(A449)
• Finished Hex Head (A499 - Heavy Hex over 1-1/2 inch dia.)
• Flat Washers GR-2 or GR-8 or F436
• Alloy Steel - Heat Treated
• For High Strength Applications
• Finished Hex Head (Yellow Zinc Plating)
• Flat Washers Grade 8 - Alloy Steel
• High Strength Structural Steel - (Used in iron works
and steel erections)
• A325 - Heavy Hex Head Bolt
• T.C. - Dome Head Bolt
• Flat Washers F436 - High Strength Structural (A325)
• Alloy Steel + Stainless Steel
• Used in High Temperature Application
• Heavy Hex Head Bolt
• Flat Washers F436 - High Strength Structural (A325)
• 18-8 Stainless Steel is standard and most commonly
used (Type 303 or 304)
• General Purpose for Flange Bolting
• Flat Washer 18-8 /304 Stainless Steel
• Type 304 Stainless Steel made to A193 B8 specification
• General Purpose for Flange Bolting for corrosion
resistant applications
• 1/2” Diameter and up - Heavy Hex unless otherwise specified
• Flat Washer 304 S/S
• Type 316 Stainless Steel Standard or A193 B8M to Specifications
• Pipe Flange Bolting for high corrosion resistant
applications
• A193 B8M 1/2” Diameter and up - Heavy Hex Unless
Otherwise Specified
• Flat Washer 316 S/S
This Chart is for Reference Only - Consult Specifications Before Use - Available on Request
Finished Hex or Heavy Hex
316 S/S or A194 Grade 8M
Bolt Type Description / Application Hex Nuts
MADE IN THE USA
AVAILABLE
ON REQUEST
MADE IN THE USA
AVAILABLE
ON REQUEST
MADE IN THE USA
AVAILABLE
ON REQUEST
MADE IN THE USA
AVAILABLE
ON REQUEST
• High Strength Structural Steel - Heat Treated
• Used in Iron Works and Steel Erections
• Heavy Hex Head Bolts, T.C. Dome Head
• Flat Washers F436 - High Strength Structural Steel (A325)
18 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TENSION CONTROL (TC) BOLTS
Part No. Description
S60EZA 5/8" - 7/8" dia. TC Bolts
S90EZA 1", 3/4 & 7/8" dia. TC Bolts
S110EZ Up to 1-1/8" dia. TC Bolts
S80EZ Compact Wrench
Length Plain Galvanized
3/4 - 10 Nominal Size & Threads
1-3/4 75C175TCB 75C175TCB0M
2 75C200TCB 75C200TCB0M
2-1/4 75C225TCB 75C225TCB0M
2-1/2 75C250TCB 75C250TCB0M
2-3/4 75C275TCB 75C275TCB0M
3 75C300TCB 75C300TCB0M
3-1/4 75C325TCB 75C325TCB0M
3-1/2 75C350TCB 75C350TCB0M
3-3/4 75C375TCB 75C375TCB0M
4 75C400TCB 75C400TCB0M
4-1/4 75C425TCB 75C425TCB0M
4-1/2 75C450TCB 75C450TCB0M
4-3/4 75C475TCB 75C475TCB0M
5 75C500TCB 75C500TCB0M
5-1/4 75C525TCB 75C525TCB0M
5-1/2 75C550TCB 75C550TCB0M
5-3/4 75C575TCB 75C575TCB0M
6 75C600TCB 75C600TCB0M
7/8 - 9 Nominal Size & Threads
2 87C200TCB 87C200TCB0M
2-1/4 87C225TCB 87C225TCB0M
2-1/2 87C250TCB 87C250TCB0M
2-3/4 87C275TCB 87C275TCB0M
3 87C300TCB 87C300TCB0M
3-1/4 87C325TCB 87C325TCB0M
3-1/2 87C350TCB 87C350TCB0M
3-3/4 87C375TCB 87C375TCB0M
4 87C400TCB 87C400TCB0M
4-1/4 87C425TCB 87C425TCB0M
4-1/2 87C450TCB 87C450TCB0M
4-3/4 87C475TCB 87C475TCB0M
5 87C500TCB 87C500TCB0M
5-1/4 87C525TCB 87C525TCB0M
5-1/2 87C550TCB 87C550TCB0M
6 87C600TCB 87C600TCB0M
Length Plain Galvanized
1 - 8 Nominal Size & Threads
2 100C200TCB 100C200TCB0M
2-1/4 100C225TCB 100C225TCB0M
2-1/2 100C250TCB 100C250TCB0M
2-3/4 100C275TCB 100C275TCB0M
3 100C300TCB 100C300TCB0M
3-1/4 100C325TCB 100C325TCB0M
3-1/2 100C350TCB 100C350TCB0M
3-3/4 100C375TCB 100C375TCB0M
4 100C400TCB 100C400TCB0M
4-1/4 100C425TCB 100C425TCB0M
4-1/2 100C450TCB 100C450TCB0M
4-3/4 100C475TCB 100C475TCB0M
5 100C500TCB 100C500TCB0M
5-1/4 100C525TCB 100C525TCB0M
5-1/2 100C550TCB 100C550TCB0M
5-3/4 100C575TCB 100C575TCB0M
6 100C600TCB 100C600TCB0M
1-1/8 - 7 Nominal Size & Threads
2-3/4 112C275TCB 112C275TCB0M
3 112C300TCB 112C300TCB0M
3-1/4 112C325TCB 112C325TCB0M
3-1/2 112C350TCB 112C350TCB0M
3-3/4 112C375TCB 112C375TCB0M
4 112C400TCB 112C400TCB0M
4-1/4 112C425TCB 112C425TCB0M
4-1/2 112C450TCB 112C450TCB0M
4-3/4 112C475TCB 112C475TCB0M
5 112C500TCB 112C500TCB0M
5-1/2 112C550TCB 112C550TCB0M
6 112C600TCB 112C600TCB0M
Determining Proper
Bolt Length
Exclusive of washers the
lengths determined by
the use of this table
should be rounded up to
the next 1/4”.
To determine the re-
quired bolt length, ADD
the length shown to the Grip Length.
Mechanical Specifications
Bolts (A325)
<3 x Diameter - Hardness: Brinnell Min.-Max.
253 - 319; Rockwell C Min.-Max. C25 - C32
>3 x Diameter - Hardness: Brinnell Min.-Max. -
-319; Rockwell C Min.-Max. - -C34.
Bolts (A490)
<3 x Diameter - Hardness: Brinnell Min.-Max.
311 - 352; Rockwell C Min.-Max. C33 - C38
>3 x Diameter - Hardness: Brinnell Min.-Max. -
-352; Rockwell C Min.-Max. - -C38.
Nuts
Grade A-194 2H; Proof Load Stress (KSI):
175, Hardness: Brinnell Min. - Max. 248-352 -
Rockwell Min. - Max. C24-C38
Washers
Grade: F-436; Rockwell Hardness C38 - C45
Bolt Size Add
5/8" 7/8"
3/4" 1"
7/8" 1-1/8"
1" 1-1/4"
TC Bolt
Installation
Tool
• Specifically de-
signed for use with
tension control, or
twist off type bolts.
• One sided, one man
installation.
• Lightweight, electric operation.
• Low maintenance.
• Quiet, non-impacting operation.
• No tool or air compressor
calibration.
• Reduced operator fatigue.
Complete Specifications are available upon request.
We repair and rent tools.
TC (Tension Control) Bolts
• TC Bolts know when the specified tension has been
reached; the special tip shears
• No operator or tool can accidentally over tension - It’s
a calibrated bolt
• Visual inspection: when the tip is gone, tension is
correct
• TC Bolts are installed faster with less operator fatigue
• Noiseless installation
• One man installation
• Provides absolute traceability and world
class quality
Specify F1852 (A325) and A490 when ordering
MADE IN THE USA
19
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STUD WELDING
D L #1 H HT FD FH Chuck Foot Grip Foot #3
Min. Length Stud Head Head Weld Fillet Weld Fillet Part Part Part and
Dia. B4 Weld Part No. Dia. Height Min. Dia. Height No. No. No. Grip
3/4 3-3/16 1011-12-051 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 3-11/16 1011-12-059 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 4-3/16 1011-12-067 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 4-11/16 1011-12-075 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 5-3/16 1011-12-083 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 6-3/16 1011-12-099 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 7-3/16 1011-12-115 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 8-3/16 1011-12-131 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 9-3/16 1011-12-147 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
3/4 10-3/16 1011-12-163 1-1/4 3/8 1-1/16 1/4 8038 1112 8054 8127
#1.Tru-weld Studs are available in any required length above the standard minimum.
#2. Listed Ferrule is for standard flat down hand position.
#3. Requires use of P/N-11101 dual leg adapter.
Light Duty Standard
Split Combination
Type SC Stud
Shear Connector - Full Weld Base
Type F Ferrule Supplied
Before Weld After Weld #2
D L #1 H HT FD FH Chuck Foot Grip Foot #3
Min. Length Stud Head Head Weld Fillet Weld Fillet Part Part Part and
Dia. B4 Weld Part No. Dia. Height Min. Dia. Height No. No. No. Grip
1/2 1-1/8 1011-08-018 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 1-1/2 1011-08-024 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 1-5/8 1011-08-026 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 2-1/8 1011-08-034 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 2-5/8 1011-08-042 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 3-1/8 1011-08-050 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 4-1/8 1011-08-066 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 5-5/16 1011-08-085 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 6-1/8 1011-08-098 1 5/16 11/16 5/32 8032 11125 8053 8126
1/2 8-1/8 1011-08-130 1 5/16 11/16 5/32 8032 11125 8053 8126
#1.Tru-weld Studs are available in any required length above the standard minimum.
#2. Listed Ferrule is for standard flat down hand position.
#3. Requires use of P/N-11101 dual leg adapter.
Light Duty Standard
Split Combination
Type CA Stud
Headed Concrete Anchor - Full Weld Base
Type F Ferrule Supplied
Before Weld After Weld #2
20 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
A-325 STRUCTURAL BOLTS
(Black) Galvanized
Length Plain Hot Dip Mechanical
1/2 - 13 Nominal Size and Threads
1-1/4 50C125A3O 50C125A3OH 50C125A3O0M
1-1/2 50C150A3O 50C150A3OH 50C150A3O0M
1-3/4 50C175A3O 50C175A3OH 50C175A3O0M
2 50C200A3O 50C200A3OH 50C200A3O0M
2-1/4 50C225A3O 50C225A3OH 50C225A3O0M
2-1/2 50C250A3O 50C250A3OH 50C250A3O0M
2-3/4 50C275A3O 50C275A3OH 50C275A3O0M
3 50C300A3O 50C300A3OH 50C300A3O0M
3-1/4 50C325A3O 50C325A3OH 50C325A3O0M
3-1/2 50C350A3O 50C350A3OH 50C350A3O0M
3-3/4 50C375A3O 50C375A3OH 50C375A3O0M
4 50C400A3O 50C400A3OH 50C400A3O0M
5/8 - 11 Nominal Size and Threads
1-1/2 62C150A3O 62C150A3OH 62C150A3O0M
1-3/4 62C175A3O 62C175A3OH 62C175A3O0M
2 62C200A3O 62C200A3OH 62C200A3O0M
2-1/4 62C225A3O 62C225A3OH 62C225A3O0M
2-1/2 62C250A3O 62C250A3OH 62C250A3O0M
2-3/4 62C275A3O 62C275A3OH 62C275A3O0M
3 62C300A3O 62C300A3OH 62C300A3O0M
3-1/4 62C325A3O 62C325A3OH 62C325A3O0M
3-1/2 62C350A3O 62C350A3OH 62C350A3O0M
3-3/4 62C375A3O 62C375A3OH 62C375A3O0M
4 62C400A3O 62C400A3OH 62C400A3O0M
4-1/2 62C450A3O 62C450A3OH 62C450A3O0M
5 62C500A3O 62C500A3OH 62C500A3O0M
5-1/2 62C550A3O 62C550A3OH 62C550A3O0M
3/4 - 10 Nominal Size and Threads
1-1/2 75C150A3O 75C150A3OH 75C150A3O0M
1-3/4 75C175A3O 75C175A3OH 75C175A3O0M
2 75C200A3O 75C200A3OH 75C200A3O0M
2-1/4 75C225A3O 75C225A3OH 75C225A3O0M
2-1/2 75C250A3O 75C250A3OH 75C250A3O0M
2-3/4 75C275A3O 75C275A3OH 75C275A3O0M
3 75C300A3O 75C300A3OH 75C300A3O0M
3-1/4 75C325A3O 75C325A3OH 75C325A3O0M
3-1/2 75C350A3O 75C350A3OH 75C350A3O0M
3-3/4 75C375A3O 75C375A3OH 75C375A3O0M
4 75C400A3O 75C400A3OH 75C400A3O0M
4-1/2 75C450A3O 75C450A3OH 75C450A3O0M
5 75C500A3O 75C500A3OH 75C500A3O0M
5-1/2 75C550A3O 75C550A3OH 75C550A3O0M
6 75C600A3O 75C600A3OH 75C600A3O0M
6-1/2 75C650A3O 75C650A3OH 75C650A3O0M
7 75C700A3O 75C700A3OH 75C700A3O0M
Structural Bolts - A325 Heavy Hex Bolts
• Heavy Hex Bolts with a washer-face on the underside of
the head primarily used in Structural Steel joints.
• Available in Black (Plain), Hot Dip Galvanized and Me-
chanical Galvanized Finishes.
• Available in Type I & Type III (Weathering Steel)
• A325-T full-thread in Type I only
••A325-T full-thread in Type I only
••Type I available in 1/2" through 1¼" diameters
•• Type III available in 3/4" through 1" diameters
••Specify Finish & Type (I or III) when ordering.
(Black) Galvanized
Length Plain Hot Dip Mechanical
3/4 - 10 Nominal Size and Threads
7-1/2 75C750A3O 75C750A3OH 75C750A3O0M
8 75C800A3O 75C800A3OH 75C800A3O0M
9 75C900A3O 75C900A3OH 75C900A3O0M
9-1/2 75C950A3O 75C950A3OH 75C950A3O0M
10 75C1000A3O 75C1000A3OH 75C1000A3O0M
7/8 - 9 Nominal Size and Threads
1-3/4 87C175A3O 87C175A3OH 87C175A3O0M
2 87C200A3O 87C200A3OH 87C200A3O0M
2-1/4 87C225A3O 87C225A3OH 87C225A3O0M
2-1/2 87C250A3O 87C250A3OH 87C250A3O0M
2-3/4 87C275A3O 87C275A3OH 87C275A3O0M
3 87C300A3O 87C300A3OH 87C300A3O0M
3-1/4 87C325A3O 87C325A3OH 87C325A3O0M
3-1/2 87C350A3O 87C350A3OH 87C350A3O0M
3-3/4 87C375A3O 87C375A3OH 87C375A3O0M
4 87C400A3O 87C400A3OH 87C400A3O0M
4-1/2 87C450A3O 87C450A3OH 87C450A3O0M
5 87C500A3O 87C500A3OH 87C500A3O0M
5-1/2 87C550A3O 87C550A3OH 87C550A3O0M
6 87C600A3O 87C600A3OH 87C600A3O0M
6-1/2 87C650A3O 87C650A3OH 87C650A3O0M
7 87C700A3O 87C700A3OH 87C700A3O0M
7-1/2 87C750A3O 87C750A3OH 87C750A3O0M
1 - 8 Nominal Size and Threads
2 100C200A3O 100C200A3OH 100C200A3O0M
2-1/4 100C225A3O 100C225A3OH 100C225A3O0M
2-1/2 100C250A3O 100C250A3OH 100C250A3O0M
2-3/4 100C275A3O 100C275A3OH 100C275A3O0M
3 100C300A3O 100C300A3OH 100C300A3O0M
3-1/4 100C325A3O 100C325A3OH 100C325A3O0M
3-1/2 100C350A3O 100C350A3OH 100C350A3O0M
3-3/4 100C375A3O 100C375A3OH 100C375A3O0M
4 100C400A3O 100C400A3OH 100C400A3O0M
4-1/2 100C450A3O 100C450A3OH 100C450A3O0M
5 100C500A3O 100C500A3OH 100C500A3O0M
5-1/2 100C550A3O 100C550A3OH 100C550A3O0M
6 100C600A3O 100C600A3OH 100C600A3O0M
6-1/2 100C650A3O 100C650A3OH 100C650A3O0M
7 100C700A3O 100C700A3OH 100C700A3O0M
7-1/2 100C750A3O 100C750A3OH 100C750A3O0M
1-1/8 - 7 Nominal Size and Threads
2-1/4 112C225A3O 112C225A3OH 112C225A3O0M
2-1/2 112C250A3O 112C250A3OH 112C250A3O0M
2-3/4 112C275A3O 112C275A3OH 112C275A3O0M
3 112C300A3O 112C300A3OH 112C300A3O0M
Available in Metric (A325M), M20, M22 & M25 diameters up to 170 mm in length. Black (Plain), Hot Dip
Galvanized & Mechanical Galvanized Finishes. Please call for availability and pricing.
A325-3 A490-3
MADE IN THE USA
AVAILABLE
ON REQUEST
21
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Beveled Square Washers
Also available in Cast Iron O.G. Washers
and Cast Iron Bridge or Timber Washers.
Galvanized
Nominal Hot Dip
ID Plain Galvanzied Qty.
1/4 25DBEW 25DBEWH 100
5/16 31DBEW 31DBEWH 100
3/8 37DBEW 37DBEWH 100
1/2 50DBEW 50DBEWH 50
5/8 62DBEW 62DBEWH 25
3/4 75DBEW 75DBEWH 20
7/8 87DBEW 87DBEWH 15
1 100DBEW 100DBEWH 10
A325 STRUCTURAL BOLTS / NUTS
Structural Bolts - A325 Heavy Hex Bolts - cont.
(Black) Galvanized
Length Plain Hot Dip Mechanical
1-1/8 - 7 Nominal Size and Threads
3-1/4 112C325A3O 112C325A3OH 112C325A3O0M
3-1/2 112C350A3O 112C350A3OH 112C350A3O0M
3-3/4 112C375A3O 112C375A3OH 112C375A3O0M
4 112C400A3O 112C400A3OH 112C400A3O0M
4-1/2 112C450A3O 112C450A3OH 112C450A3O0M
5 112C500A3O 112C500A3OH 112C500A3O0M
5-1/2 112C550A3O 112C550A3OH 112C550A3O0M
6 112C600A3O 112C600A3OH 112C600A3O0M
6-1/2 112C650A3O 112C650A3OH 112C650A3O0M
7 112C700A3O 112C700A3OH 112C700A3O0M
7-1/2 112C750A3O 112C750A3OH 112C750A3O0M
1-1/4 - 7 Nominal Size and Threads
2-1/4 125C225A3O 125C225A3OH 125C225A3O0M
2-1/2 125C250A3O 125C250A3OH 125C250A3O0M
2-3/4 125C275A3O 125C275A3OH 125C275A3O0M
3 125C300A3O 125C300A3OH 125C300A3O0M
3-1/4 125C325A3O 125C325A3OH 125C325A3O0M
3-1/2 125C350A3O 125C350A3OH 125C350A3O0M
3-3/4 125C375A3O 125C375A3OH 125C375A3O0M
4 125C400A3O 125C400A3OH 125C400A3O0M
4-1/2 125C450A3O 125C450A3OH 125C450A3O0M
5 125C500A3O 125C500A3OH 125C500A3O0M
5-1/2 125C550A3O 125C550A3OH 125C550A3O0M
6 125C600A3O 125C600A3OH 125C600A3O0M
6-1/2 125C650A3O 125C650A3OH 125C650A3O0M
7 125C700A3O 125C700A3OH 125C700A3O0M
7-1/2 125C750A3O 125C750A3OH 125C750A3O0M
A325 Flat Washers (ASTM F436)
• Plain or Hot Dip Galvanized Finish.
• Call for complete specifications.
Size Plain HDG
1/2 50DA3W 50DA3WH
5/8 62DA3W 62DA3WH
3/4 75DA3W 75DA3WH
7/8 87DA3W 87DA3WH
Size Plain HDG
1 100DA3W 100DA3WH
1-1/8 112DA3W 112DA3WH
1-1/4 125DA3W 125DA3WH
1-1/2 150DA3W 150DA3WH
ASTM A563 Grade DH & DH3
Structural Nuts
Finishes: Grade DH - Black (Plain), mechanical & hot
dipped galvanized.
Grade DH3 - Black Type III weathering steel
Squirter® DTI's
How Much Squirt is Tight?
• Flexible silicone is embedded in the
depressions under the bumps.
• Tighten the bolt until the calibrated
amount of organe silicone appears
from under the squirt locations.
Size Part No.
3/4 75DLIWSQ
7/8 87DLIWSQ
1 100DLIWSQ
Length Part No.
7/8 - 9 Nominal Size & Threads
2 87C200A4O
3 87C300A4O
5 87C500A4O
6 87C600A4O
7 87C700A4O
7-1/2 87C750A4O
1-8 Nominal Size & Threads
2-3/4 100C275A4O
3 100C275A4O
3-1/2 100C275A4O
3-3/4 100C275A4O
4 100C275A4O
4-1/4 100C275A4O
4-1/2 100C275A4O
A490 Hex Bolt w/Nut
Type 1 Plain
Length Part No.
1-8 Nominal Size & Threads
4-3/4 100C275A4O
5 100C275A4O
5-1/2 100C275A4O
6-1/2 100C275A4O
6-1/2 100C275A4O
7 100C275A4O
9 100C275A4O
1-1/4 - 7 Nominal Size & Threads
1 75C100A4O
2 75C200A4O
2-1/4 75C225A4O
2-1/2 75C250A4O
3-3/4 75C375A4O
11 75C1100A4O
ASTM A563 ASTM A563 ASTM A563 ASTM A563
Grade C Grade C3 Grade DH Grade DH3
Size DH
1/2-13 50CDHH
5/8-11 62CDHH
3/4-10 75CDHH
7/8-9 87CDHH
1-8 100CDHH
1-1/8-7 112CDHH
1-1/4-7 125CDHH
Size DH 3 Type III
1/2-13 50CHHN/A563DH3
5/8-11 62CHHN/A563DH3
3/4-10 75CHHN/A563DH3
7/8-9 87CHHN/A563DH3
1-8 100CHHN/A563DH3
1-1/8-7 112CHHN/A563DH3
1-1/4- 7 125CHHN/A563DH3
22 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HEX BOLTS
Hex Cap Screws
Grade 2 Plain & Zinc Plated
• Standard thread length is 2 x diameter + 1/4 inch
• Most sizes also available in bulk
• Other sizes available on request
• Fully Threaded Tap Bolts available
L
e
n
g
t
h
Diameter
1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
1/2 1/2 1/2 — — — — — — —
5/8 5/8 5/8 — — — — — — —
3/4 3/4 3/4 3/4 3/4 — — — — —
1 1 1 1 1 1 1 — — —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 — — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8
Finished Hex Nuts
• Steel
• Zinc Plated
The most versatile and
widely used nut design.
Grade-2 nuts are for use with any low
carbon bolt or screw that is not heat-
treated, with a specified minimum
tensile strength of 74,000 psi or less.
Size Pkg. Qty. Bulk Qty.
1/4 - 20 100 9000
5/16 - 18 100 6000
3/8 - 16 100 4000
1/2 - 13 50 1800
5/8 - 11 25 800
3/4 - 10 20 500
7/8 - 9 15 300
1 - 8 10 190
1-1/8 - 7 10 140
1-1/4 - 7 10 100
1-1/2 - 6 10 55
1-3/4 - 5 5 30
2 - 4-1/2 5 20
Heavy Hex Nuts
• Steel
• Zinc Plated
Nuts are used with low-
carbon heavy hex bolts.
Size Pkg. Qty. Bulk Qty.
1/4 - 20 100 5500
5/16 - 18 100 3700
3/8 - 16 100 2000
1/2 - 13 50 1000
5/8 - 11 25 540
3/4 - 10 20 340
7/8 - 9 15 220
1 - 8 10 150
1-1/8 - 7 10 100
1-1/4 - 7 10 75
1-1/2 - 6 10 40
1-3/4 - 5 10 20
2 - 4-1/2 10 15
Flat Washers
• Steel
• Zinc Plated
Pkg. Bulk Pcs/
Size Qty. Qty. Bulk
1/4 100 50# 7450
5/16 100 50# 4350
3/8 100 50# 3350
1/2 100 50# 1300
5/8 50 50# 650
3/4 25 50# 455
7/8 25 50# 325
1 25 50# 265
1-1/8 25 50# 225
1-1/4 25 50# 190
1-1/2 25 50# 190
1-3/4 25 50# 100
2 10 50# 100
23
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Diameter
1/2-13 5/8-11 3/4-10 7/8-9 1-8 1-1/8-7 1-1/4-7 1-1/2-6
1 - - - - - - -
1-1/4 1-1/4 - - - - - -
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 - - -
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 - - -
2 2 2 2 2 2 - -
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 -
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 -
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 5-1/2
8 8 8 8 8 8 8
L
e
n
g
t
h
Bolting Dimensions for 150 Lb. Flanges
Nom. Bolt Bolts *Stud Bolt
Pipe Dia. Req. Length Length
1/2 1/2 4 2-1/4 1-3/4
3/4 1/2 4 2-1/4 2
1 1/2 4 2-1/2 2
1-1/4 1/2 4 2-1/4 2-1/4
1-1/2 1/2 4 2-3/4 2-1/4
2 5/8 4 3 2-3/4
2-1/2 5/8 4 3-1/4 3
3 5/8 4 3-1/2 3
3-1/2 5/8 8 3-1/2 3
4 5/8 8 3-1/2 3
5 3/4 8 3-3/4 3-1/4
6 3/4 8 3-3/4 3-1/4
8 3/4 8 4 3-1/2
10 7/8 12 4-1/2 3-3/4
12 7/8 12 4-1/2 4
14 1 12 5 4-1/4
16 1 16 5-1/4 4-1/2
18 1-1/8 16 5-3/4 4-3/4
20 1-1/8 20 6 5-1/4
22 1-1/4 20 6-1/2 5-1/2
24 1-1/4 20 6-3/4 5-3/4
26 1-1/4 24 7 6
30 1-1/4 28 7-1/4 6-1/4
34 1-1/2 32 8 7
36 1-1/2 32 8-1/4 7
42 1-1/2 36 8-3/4 7-1/2
Let Us Help You With Your Next
Bolt & Gasket Kit Inquiry!
A. What Style Gasket?
m Ring
m Full Face
m Other _____________
B. What Type Material?
m Synthetic Nitrile
m Neoprene
m Red Rubber
m Other _____________
C. Gasket Thickness?
m 1/16
m 1/8
m Other _____________
Gasket Selection
D. Pressure (LB.) Size?
m 150 LB.
m 300 LB.
m Other _____________
E. Gasket (Pipe) Size?
m 1/2" thru 36"
m Specify ____________
F. Pipe Type?
m Iron
m Cast Iron
m Stainless
m Other _____________
• Bolts & nuts sized according to specifications given.
Flange Gaskets Only Flange Gasket Kits (Bolt Packs)
HEX BOLTS / GASKETS
Heavy Hex Bolts A307 Grade B
• Heavy pattern for primary use in
• Special sizes available on request
• Order Heavy Hex Nuts separately
• Specify Finish:
- Plain
- Plated
- Hot Dip Galvanized
MADE IN THE USA
AVAILABLE
ON REQUEST
24 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Heavy Hex Bolts - A193 B7
Diameter
1/2-13 5/8-11 3/4-10 7/8-9 1-8 1-1/8-7 1-1/4-7 1-1/2-6
1 - - - - - - -
1-1/4 1-1/4 - - - - - -
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 - - -
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 - - -
2 2 2 2 2 2 - -
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 -
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 -
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 -
3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 5-1/2
8 8 8 8 8 8 8
L
e
n
g
t
h
• Heavy Hex Head Pattern made of alloy steel for high temperature service
• Sizes 3/4-10, 7/8-9 and 1-8 also available in zinc plated
• Special sizes available upon request
• B-7 studs and bolts in the 1-1/8 inch and larger have an 8 thread pitch series
unless otherwise specified
• Also available in Zinc Plated
HEX BOLTS B7 / B7 STUDS
Heavy Hex Nuts
ASTM A194 - Grade 2H
Plain - For use with structural bolts and B-7
Hex Bolts and Studs. Available in bulk. Also
available in Zinc Plated.
Size A194-2H A194-2H
Hot Dip Galvanized
1/2 - 13 50CTHH 50CTHHH
5/8 - 11 62CTHH 62CTHHH
3/4 - 10 75CTHH 75CTHHH
7/8 - 9 87CTHH 87CTHHH
1 - 8 100CTHH 100CTHHH
1-1/8 - 7 112CTHH 112CTHHH
1-1/8 - 8* 112CTHH -
1-1/4 - 7 125CTHH 125CTHHH
1-1/4 - 8* 125CTHH -
1-1/2 - 6 - 150CTHHH
* For B-7 Bolt and Stud Applications
Fully Threaded
(Mesured First Thread to First thread Per ASTM
A193 / A320 • (Standard Stock)
1/2" Thru 1-1/2" Diameter Studs
Available in
All Lengths
ASTM - A193B7 Studs
• In Stock
MADE IN THE USA
AVAILABLE
ON REQUEST
25
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Diameter
1/2-13 5/8-11 3/4-10 7/8-9 1-8 1-1/8-7 1-1/4-7 1-1/2-6
1 - - - - - - -
1-1/4 1-1/4 - - - - - -
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 - - -
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 - - -
2 2 2 2 2 2 - -
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 -
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 -
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 -
3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 5-1/2
8 8 8 8 8 8 8
L
e
n
g
t
h
For Standard Stainless Steel 304 / 316 Bolts • See pages 28 and 29
HEX BOLTS B8 / B8M
• A193, B8 is 304 SS manufactured to meet A193, B8
specifications - B8 bolts call for A194 Grade 8 Heavy Hex Nuts
• A193, B8M is 316 SS manufactured to meet A193, B8M specifi-
cations - B8M bolts call for A194 Grade 8M Heavy Hex Nuts
Stainless Steel A193 B8
and B8M Bolts
Type 304 (18-8) & Type 316
Stainless Steel Flat Washers
Size 18-8 No. 316 No. Qty.
1/4 25DFLWS 25DFLW3 100
5/16 31DFLWS 31DFLW3 100
3/8 37DFLWS 37DFLW3 100
1/2 50DFLWS 50DFLW3 100
5/8 62DFLWS 62DFLW3 25
3/4 75DFLWS 75DFLW3 20
7/8 87DFLWS 87DFLW3 15
1 100DFLWS 100DFLW3 10
1-1/8 112DFLWS 112DFLW3 10
1-1/4 125DFLWS 125DFLW3 10
1-1/2 150DFLWS 150DFLW3 10
Heavy Hex Nuts A194
ASTM A194 - Grade 8
Type 304 (18-8) Stainless Steel
ASTM A194 - Grade 8M
Type 316 Stainless Steel
A194 A194
Size Grade 8 8M
1/2 - 13 50CHHNS/GR8 50CHHNS/GR8M
5/8 - 11 62CHHNS/GR8 62CHHNS/GR8M
3/4 - 10 75CHHNS/GR8 75CHHNS/GR8M
7/8 - 9 87CHHNS/GR8 87CHHNS/GR8M
1 - 8 100CHHNS/GR 100CHHNS/GR8M
1-1/8 - 7 112CHHNS/GR 112CHHNS/GR8M
1-1/4 - 7 125CHHNS/GR 125CHHNS/GR8M
1-1/2 - 6 150CHHNS/GR 150CHHNS/GR8M
MADE IN THE USA
AVAILABLE
ON REQUEST
26 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Diameter
1/4-20 5/16-18 3/8-16 1/2-13 5/8-11 3/4-10
1/2 1/2 1/2 — — —
5/8 5/8 5/8 — — —
3/4 3/4 3/4 3/4 — —
1 1 1 1 1 —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4
2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6
L
e
n
g
t
h
Diameter
1/4-20 5/16-18 3/8-16 1/2-13 5/8-11
3/4 3/4 3/4 — —
1 1 1 — —
1-1/4 1-1/4 1-1/4 — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4
2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6
— — 8 8 8
— — 10 10 10
— — 12 12 12
L
e
n
g
t
h
The formula for standard thread
length is
2 x diameter + 1/4.
By default, bolts with a length
shorter than
2 times the diameter will be fully
threaded.
• If you have special needs, call us
and we will track it down for you.
• Low Carbon Steel - Zinc Plated
• Also available in Grade 5
BOLTS
Carriage Screws (Bolts)
•No Nuts
• Zinc Plated
Lag Bolts
• Zinc Plated
L
e
n
g
t
h
Diameter
1/4 5/16 3/8 1/2 5/8
1 1 1 — —
1-1/4 1-1/4 1-1/4 — —
1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6
Hex Head Tap Bolts - Fully Threaded
27
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Diameter
1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
1/2 1/2 1/2 — — — — — — —
5/8 5/8 5/8 — — — — — — —
3/4 3/4 3/4 3/4 3/4 — — — — —
1 1 1 1 1 1 1 — — —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 — — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8
L
e
n
g
t
h
HEX CAP SCREWS GRADE 5 & 8
Diameter
1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
1/2 1/2 1/2 — — — — — — —
5/8 5/8 5/8 — — — — — — —
3/4 3/4 3/4 3/4 3/4 — — — — —
1 1 1 1 1 1 1 — — —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 — — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8
L
e
n
g
t
h
Hex Cap Screws
Grade 5 Zinc Plated
Hex Cap Screws
Grade 8 Zinc Plated
MADE IN THE USA
AVAILABLE
ON REQUEST
MADE IN THE USA
AVAILABLE
ON REQUEST
28 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Diameter
1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
1/2 1/2 1/2 — — — — — — —
5/8 5/8 5/8 — — — — — — —
3/4 3/4 3/4 3/4 3/4 — — — — —
1 1 1 1 1 1 1 — — —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 — — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8
L
e
n
g
t
h
Type 303 and 304 Stainless Steels make up the majority of fasteners in the
18-8 grouping.
If you have specific 300 Series Stainless Steel requirements, call your
NEFCO Representative.
• Proof Load: None • Yield Strength: 30,000 • Tensile Strength: 75,000
18-8 Stainless Steel
Flat & Lock
Washers
Size Flat Qty. Lock Qty.
8 — — 8NLOWS 100
10 — — 10NLOWS 100
1/4 25DFLWS 100 25NLOWS 100
5/16 31DFLWS 100 31NLOWS 100
3/8 37DFLWS 100 38NLOWS 100
7/16 43DFLWS 100 43NLOWS 100
1/2 50DFLWS 100 50NLOWS 100
5/8 62DFLWS 25 62NLOWS 100
3/4 75DFLWS 20 75NLOWS 100
7/8 87DFLWS 15 87NLOWS 100
1 100DFLWS 10 100NLOWS 100
1-1/8 112DFLWS 10 — —
1-1/4 125DFLWS 10 — —
1-1/2 150DFLWS 10 — —
STAINLESS STEEL HEX CAP SCREWS
18-8 Stainless Steel Hex Head Cap
Screws - Type 303/304 SS304
18-8 Stainless Steel
Finished Hex &
Heavy Hex Nuts
Size Finished Hex Heavy Hex
1/4 - 20 25CHFNS 25CHHNS
5/16 - 18 31CHFNS 31CHHNS
3/8 - 16 37CHFNS 37CHHNS
7/16 - 14 43CHFNS 43CHHNS
1/2 - 13 50CHFNS 50CHHNS
5/8 - 11 62CHFNS 62CHHNS
3/4 - 10 75CHFNS 75CHHNS
7/8 - 9 87CHFNS 87CHHNS
1 - 8 100CHFNS 100CHHNS
1-1/8 - 7 112CHFNS —
1-1/4 - 7 125CHFNS 125CHHNS
1-1/2 - 6 150CHFNS —
MADE IN THE USA
AVAILABLE
ON REQUEST
29
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Type 316 Stainless Steel has the same strength characteristics as it’s
cousin 18-8. The addition of about 14% nickel gives it a cleaner look and
feel, as well as better corrosion resistance. It has good compatibility with
salt water and caustic chemical environments. Also available in Fine Thread.
Diameter
1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
1/2 1/2 1/2 — — — — — — —
5/8 5/8 5/8 — — — — — — —
3/4 3/4 3/4 3/4 3/4 — — — — —
1 1 1 1 1 1 1 — — —
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 — — —
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 —
1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 —
2 2 2 2 2 2 2 2 2 2
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2
2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4
3 3 3 3 3 3 3 3 3 3
3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
4 4 4 4 4 4 4 4 4 4
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2
5 5 5 5 5 5 5 5 5 5
5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2
6 6 6 6 6 6 6 6 6 6
6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2 6-1/2
7 7 7 7 7 7 7 7 7 7
8 8 8 8 8 8 8 8 8 8
L
e
n
g
t
h
STAINLESS STEEL HEX CAP SCREWS
SS316
Type 316 Stainless Steel
Hex Head Cap Screws
316 Stainless Steel
Finished Hex and
Heavy Hex Nuts
Size Finished Hex Heavy Hex
1/4 - 20 25CHFN3 25CHHN3
5/16 - 18 31CHFN3 31CHHN3
3/8 - 16 37CHFN3 37CHHN3
7/16 - 14 43CHFN3 43CHHN3
1/2 - 13 50CHFN3 50CHHN3
5/8 - 11 62CHFN3 62CHHN3
3/4 - 10 75CHFN3 75CHHN3
7/8 - 9 87CHFN3 87CHHN3
1 - 8 100CHFN3 100CHHN3
1-1/8 - 7 112CHFN3 —
1-1/4 - 7 125CHFN3 —
1-1/2 - 6 150CHFN3 —
316 Stainless Steel
Flat and Lock
Washers
Size Flat Qty. Lock Qty.
8 — — 8NLOW3 100
10 — — 10NLOW3 100
1/4 25DFLW3 100 25NLOW3 100
5/16 31DFLW3 100 31NLOW3 100
3/8 37DFLW3 100 38NLOW3 100
7/16 43DFLW3 100 43NLOW3 100
1/2 50DFLW3 100 50NLOW3 100
5/8 62DFLW3 25 62NLOW3 100
3/4 75DFLW3 20 75NLOW3 100
7/8 87DFLW3 15 87NLOW3 100
1 100DFLW3 10 100NLOW3 100
1-1/8 112DFLW3 10 — —
1-1/4 125DFLW3 10 — —
1-1/2 150DFLW3 10 — —
MADE IN THE USA
AVAILABLE
ON REQUEST
30 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Nom. Basic Width Width Thickness Thickness
Major Dia. Across Flats Across Corners Of Hex Nut Hex Jam Nuts
Of Thread Max. Min. Max. Min. Max. Min. Max. Min.
1/4 0.438 0.428 0.505 0.488 0.226 0.212 0.163 0.150
5/16 0.500 0.489 0.577 0.557 0.273 0.258 0.195 0.180
3/8 0.562 0.551 0.650 0.628 0.337 0.320 0.227 0.210
7/16 0.688 0.675 0.794 0.768 0.385 0.365 0.260 0.240
1/2 0.750 0.736 0.866 0.840 0.448 0.427 0.323 0.302
9/16 0.875 0.861 1.010 0.982 0.496 0.473 0.324 0.301
5/8 0.938 0.922 1.083 1.051 0.559 0.535 0.387 0.363
3/4 1.125 1.088 1.299 1.240 0.665 0.617 0.446 0.398
7/8 1.312 1.269 1.516 1.447 0.776 0.724 0.510 0.458
1 1.500 1.450 1.732 1.653 0.887 0.831 0.575 0.519
1-1/8 1.688 1.631 1.949 1.859 0.999 0.939 0.639 0.579
1-1/4 1.875 1.812 2.165 2.066 1.094 1.030 0.751 0.687
1-3/8 2.062 1.994 2.382 2.273 1.206 1.138 0.815 0.747
1-1/2 2.250 2.175 2.598 2.480 1.317 1.245 0.880 0.808
FINISHED HEX NUTS
Grade 2
• Low Carbon -
Plain and Zinc
Part No. Part No.
Size Plain Zinc Qty.
Standard Coarse Thread
1/4–20 25CHFN 25CHFNZ 100
5/16–18 31CHFN 31CHFNZ 100
3/8–16 37CHFN 37CHFNZ 100
7/16–14 43CHFN 43CHFNZ 50
1/2–13 50CHFN 50CHFNZ 50
9/16–12 56CHFN 56CHFNZ 25
5/8–11 62CHFN 62CHFNZ 25
3/4–10 75CHFN 75CHFNZ 20
7/8–9 87CHFN 87CHFNZ 15
1–8 100CHFN 100CHFNZ 10
1-1/8–7 112CHFN - 10
1-1/4–7 125CHFN - 5
1-3/8–6 137CHFN - 5
1-1/2–6 150CHFN - 5
2 - 4–5 50CHFN - 5
Fine Coarse Thread
1/4–28 25FHFN 25FHFNZ 100
5/16–24 31FHFN 31FHFNZ 100
3/8–24 37FHFN 37FHFNZ 100
7/16–20 43FHFN 43FHFNZ 50
1/2–20 50FHFN 50FHFNZ 50
9/16–18 56FHFN 56FHFNZ 25
5/8–18 62FHFN 62FHFNZ 25
3/4–16 75FHFN 75FHFNZ 20
7/8–14 87FHFN 87FHFNZ 15
1–14 100FHFN 100FHFNZ 10
1-1/8–12 112FHFN - 10
1-1/4–12 125FHFN - 5
1-3/8–12 137FHFN - 5
1-1/2–12 150FHFN - 5
Grade 5
• Plain and Zinc
Part No. Part No.
Size Plain Zinc Qty.
Standard Coarse Thread
1/4 - 20 25CHFN5 25CHFN5Z 100
5/16 - 18 31CHFN5 31CHFN5Z 100
3/8 - 16 37CHFN5 37CHFN5Z 100
7/16 - 14 43CHFN5 43CHFN5Z 50
1/2 - 13 50CHFN5 50CHFN5Z 50
9/16 - 12 56CHFN5 56CHFN5Z 25
5/8 - 11 62CHFN5 62CHFN5Z 25
3/4 - 10 75CHFN5 75CHFN5Z 20
7/8 - 9 87CHFN5 87CHFN5Z 15
1 - 8 100CHFN5 100CHF5NZ 10
Fine Coarse Thread
1/4 - 28 25FHFN5 25FHFN5Z 100
5/16 - 24 31FHFN5 31FHFN5Z 100
3/8 - 24 37FHFN5 37FHFN5Z 100
7/16 - 20 43FHFN5 43FHFN5Z 50
1/2 - 20 50FHFN5 50FHFN5Z 50
9/16 - 18 56FHFN5 56FHFN5Z 25
5/8 - 18 62FHFN5 62FHFN5Z 25
3/4 - 16 75FHFN5 75FHFN5Z 20
7/8 - 14 87FHFN5 87FHFN5Z 15
1 - 14 100FHFN5 100FHF5NZ 10
Grade 8
• Yellow Zinc
Part No.
Size Yellow Zinc Qty.
Stand. Coarse Thread
1/4 - 20 25CHFN8Y 100
5/16 - 18 31CHFN8Y 100
3/8 - 16 37CHFN8Y 100
7/16 - 14 43CHFN8Y 50
1/2 - 13 50CHFN8Y 50
9/16 - 12 56CHFN8Y 25
5/8 - 11 62CHFN8Y 25
3/4 - 10 75CHFN8Y 20
7/8 - 9 87CHFN8Y 15
1 - 8 100CHFN8Y 10
1-1/8 - 7 112CHFN8Y 10
1-1/4 - 7 125CHFN8Y 5
1-1/2 - 6 150CHFN8Y 5
Fine Coarse Thread
1/4 - 28 25FHFN8Y 100
5/16 - 24 31FHFN8Y 100
3/8 - 24 37FHFN8Y 100
7/16 - 20 43FHFN8Y 50
1/2 - 20 50FHFN8Y 50
9/16 - 18 56FHFN8Y 25
5/8 - 18 62FHFN8Y 25
3/4 - 16 75FHFN8Y 20
7/8 - 14 87FHFN8Y 15
1 - 14 100FHFN8Y 10
1-1/4 - 7 125FHFN8Y 5
1-1/2 - 6 150FHFN8Y 5
Hex Nut & Hex Jam
Nut Specifications &
Dimensions
Source: ANSI / ASME B18. 2.2, 1981
Hot Dip
Galvanized
Due to the thickness
of galvanized coating,
galvanized nuts are tapped oversize
to optimize performance.
Size Part No. Qty.
Coarse Thread
1/4 - 20 25CHFNH 100
5/16 - 18 31CHFNH 100
3/8 - 16 37CHFNH 100
1/2 - 13 50CHFNH 50
5/8 - 11 62CHFNH 25
3/4 - 10 75CHFNH 20
7/8 - 9 87CHFNH 15
1 - 8 100CHFNH 10
31
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HEAVY HEX NUTS
Heavy Hex Nut Dimensions
A194-2H
Hot Dip Hot Dip A194 A194
Size Plain Zinc Galvanized A194-2H Galvanized Grade 8 8M
1/4 - 20 25CHHN 25CHHNZ 25CHHNH 25CTHH — — —
5/16 - 18 31CHHN 31CHHNZ 31CHHNH 31CTHH — — —
3/8 - 16 37CHHN 37CHHNZ 37CHHNH 37CTHH — — —
7/16 - 14 43CHHN 43CHHNZ — 43CTHH — — —
1/2 - 13 50CHHN 50CHHNZ 50CHHNH 50CTHH 50CTHHH 50CHHNS/GR8 50CHHNS/GR8M
9/16 - 12 56CHHN 56CHHNZ — — — — —
5/8 - 11 62CHFN5 62CHFN5Z 62CHHNH 62CTHH 62CTHHH 62CHHNS/GR8 62CHHNS/GR8M
3/4 - 10 75CHFN5 75CHFN5Z 75CHHNH 75CTHH 75CTHHH 75CHHNS/GR8 75CHHNS/GR8M
7/8 - 9 87CHFN5 87CHFN5Z 87CHHNH 87CTHH 87CTHHH 87CHHNS/GR8 87CHHNS/GR8M
1 - 8 100CHFN5 100CHF5NZ 100CHHNH 100CTHH 100CTHHH 100CHHNS/GR 100CHHNS/GR8M
1-1/8 - 7 112CHFN5 112CHF5NZ 112CHHNH 112CTHH 112CTHHH 112CHHNS/GR 112CHHNS/GR8M
1-1/8 - 8* — — — 112CTHH — — —
1-1/4 - 7 125CHFN5 125CHF5NZ 125CHHNH 125CTHH 125CTHHH 125CHHNS/GR 125CHHNS/GR8M
1-1/4 - 8* — — — 125CTHH — — —
1-3/8 - 6 — — — — 137CTHHH — —
1-1/2 - 6 150CHFN5 150CHF5NZ 150CHHNH — 150CTHHH 150CHHNS/GR 150CHHNS/GR8M
1-3/4 - 5 175CHFN5 175CHF5NZ 175CHHNH — — — —
* For B-7 Bolt and Stud Applications
Nom. Or Basic Width Across Width Acrosss Thickness of
Major Dia. Flats Corners Hex Nuts
Of Thread Basic Max. Min. Max. Min. Basic Max. Min.
1/4 0.2500 1/2 0.500 0.488 0.577 0.556 15/64 0.250 0.218
5/16 0.3125 9/16 0.562 0.546 0.650 0.622 19/64 0.314 0.280
3/8 0.375 11/16 0.688 0.669 0.794 0.763 23/64 0.377 0.341
7/16 0.4375 3/4 0.750 0.728 0.866 0.830 27/64 0.441 0.403
1/2 0.5000 7/8 0.875 0.850 1.010 0.969 31/64 0.504 0.464
9/16 0.5625 15/16 0.938 0.909 1.083 1.037 35/64 0.568 0.526
5/8 0.6250 1-1/6 1.062 1.031 1.227 1.175 39/64 0.631 0.587
3/4 0.7500 1-1/4 1.250 1.212 1.443 1.382 47/64 0.758 0.710
7/8 0.8750 1-7/16 1.438 1.394 1.660 1.589 55/64 0.885 0.833
1 1.0000 1-5/8 1.625 1.575 1.876 1.796 63/64 1.012 0.956
1-1/8 1.1250 1-13/16 1.812 1.756 2.093 2.002 1-7/64 1.139 1.079
1-1/4 1.2500 2 2.000 1.938 2.309 2.209 1-7/32 1.251 1.187
1-3/8 1.3750 2-3/16 2.188 2.119 2.526 2.416 1-11/32 1.378 1.310
1-1/2 1.5000 2-3/8 2.375 2.300 2.742 2.622 1-15/32 1.505 1.433
1-5/8 1.6250 2-9/16 2.562 2.481 2.959 2.828 1-19/32 1.632 1.556
1-3/4 1.7500 2-3/4 2.750 2.662 3.175 3.035 1-23/32 1.759 1.679
2 2.0000 3-1/8 3.125 3.025 3.608 3.449 2 2.013 1.925
Heavy Hex Nuts
Plain and Zinc
• Low Carbon - Plain and Zinc
Hot Dip Galvanized
• Low Carbon
ASTM A194 - Grade 2H
• Plain - For use with structural bolts and B-7 Hex Bolts
and Studs. Available in bulk.
• Also available in Zinc Plated.
ASTM A194 - Grade 8
• 18-8 Stainless
ASTM A194 - Grade 8M
• 316 Stainless
Slip-ON® Lock Nut
• Save time and $$$
• Eliminate the threading of
nuts
• Reduce initial installation
cost
Developed with the ability to
be positioned on threaded rod
or bolt at any point, without
the time consuming nuisance
of threading. Just open the
Slip-ON® Lock Nut and insert
where needed. Twist close and
tighten with a wrench. It's that
simple.
See page 173 for ordering
information
MADE IN THE USA
AVAILABLE
ON REQUEST
32 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Serrated Flange
Nuts
• Zinc Plated
Size Part No. Qty.
1/4–20 25CSFNZ 100
5/16–18 31CSFNZ 100
3/8–16 37CSFNZ 100
1/2–13 50CSFNZ 50
JAM / LOCK NUTS
Hex Jam Nuts -
Finish Pattern
• Plain and Zinc
Sometimes called a half
nut. When two are used together,
they lock in place.
Part No. Part No.
Size Plain Qty Zinc Qty
1/4-20 25CHJN 50 25CHJNZ 100
5/16-18 31CHJN 100 31CHJNZ 100
3/8-16 37CHJN 100 37CHJNZ 100
7/16-14 43CHJN 15 43CHJNZ 50
1/2-13 50CHJN 20 50CHJNZ 50
9/16-12 56CHJN 25 56CHJNZ 25
5/8-11 62CHJN 100 62CHJNZ 25
3/4-10 75CHJN 50 75CHJNZ 20
7/8-9 87CHJN 25 87CHJNZ 15
1-8 100CHJN 10 100CHJNZ 10
1-1/8–7 112CHJN 10 112CHJNZ 10
1-1/4–7 125CHJN 5 125CHJNZ 5
1-1/2–6 150CHJN 5 150CHJNZ 5
Reversible Lock
Nuts
• Zinc Plated
Size Part No. Qty.
Coarse Thread
1/4–20 25CRLNZ 100
5/16–18 31CRLNZ 100
3/8–16 37CRLNZ 100
7/16–14 43CRLNZ 100
1/2–13 50CRLNZ 100
9/16–12 56CRLNZ 100
5/8–11 62CRLNZ 100
3/4–10 75CRLNZ 100
7/8–9 87CRLNZ 100
1–8 100CRLNZ 100
Fine Thread
1/4–28 25FRLNZ 100
5/16–24 31FRLNZ 100
1/2–20 50FRLNZ 100
Kep Lock Nuts
Attached external tooth
lock washer.
• Zinc Plated
Size Part No. Qty.
Coarse Thread
4–40 4CKENZ 100
6–32 6CKENZ 100
8–32 8CKENZ 100
10–24 10CKENZ 100
1/4–20 25CKENZ 100
5/16–18 31CKENZ 100
3/8–16 37CKENZ 100
Fine Thread
10–32 10FKENZ 100
1/4–28 25FKENZ 100
Nom. Or Basic Width Across Width Acrosss Thickness of
Major Dia. Flats Corners Hex Nuts
Of Thread Basic Max. Min. Max. Min. Basic Max. Min.
1/4 0.2500 7/16 0.438 0.428 0.505 0.488 15/32 0.163 0.150
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 3/16 0.195 0.180
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 7/32 0.227 0.210
7/16 0.4375 11/16 0.688 0.675 0.794 0.768 1/4 0.260 0.240
1/2 0.5000 3/4 0.750 0.736 1.866 0.840 5/16 0.323 0.302
9/16 0.5625 7/8 0.875 0.861 1.010 0.982 5/16 0.324 0.301
0.982 5/16 0.324 0.938 0.922 1.083 1.051 3/8 0.387 0.363
5/8 0.6250 15/16 1.125 1.088 1.299 1.240 27/64 0.446 0.398
1.051 3/8 0.387 1.312 1.269 1.516 1.447 31/64 0.510 0.458
3/4 0.7500 1-1/8 1.500 1.450 1.732 1.653 35/64 1.575 0.519
1.240 27/64 0.446 1.688 1.631 1.949 1.859 39/64 1.639 0.579
7/8 0.8750 1-15/16 1.875 1.812 2.165 2.066 23/32 1.751 0.687
Jam Nut Dimensions
Nylon Insert Lock
Nuts
• Zinc Plated
Size Part No. Qty
NM-Machine Screw Sizes
4–40 4CNMNZ 100
5–40 5CNMNZ 100
6–32 6CNMNZ 100
8–2 8CNMNZ 100
10–24 10CNMNZ 100
10–32 10FNMNZ 100
NE-Coarse Thread
1/4–20 25CNENZ 100
5/16–18 31CNENZ 100
3/8–16 37CNENZ 100
7/16–14 43CNENZ 50
1/2–13 50CNENZ 50
9/16–12 56CNENZ 50
5/8–11 62CNENZ 25
3/4–10 75CNENZ 20
7/8–9 87CNENZ 15
1–8 100CNENZ 10
NE-Fine Thread
1/4–28 25FNENZ 100
5/16–24 31FNENZ 100
3/8–24 37FNENZ 100
7/16–20 43FNENZ 50
1/2–20 50FNENZ 50
9/16–18 56FNENZ 100
5/8–18 62FNENZ 25
3/4–16 75FNENZ 20
7/8–14 87FNENZ 15
1–14 100FNENZ 10
Jam Nylon Insert
Lock Nuts
• Zinc Plated
Size Part No. Qty
NTE-Coarse Thread
1/4–20 25CNTEZ 100
5/16–18 31CNTEZ 100
3/8–16 37CNTEZ 100
1/2–13 50CNTEZ 50
5/8–11 62CNTEZ 25
3/4–10 75CNTEZ 20
NE-Fine Thread
1/4– 28 25FNTEZ 100
5/16–24 31FNTEZ 100
3/8–24 37FNTEZ 100
7/16–20 43FNTEZ 100
1/2–20 50FNTEZ 100
5/8–18 62FNTEZ 100
3/4–16 75FNTEZ 100
7/8–14 87FNTEZ 100
1–14 100FNTEZ 100
1-1/4–12 125FNTEZ 25
1-1/2–12 150FNTEZ 25
33
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
NUTS / ROD COUPLING
All Metal Top Lock
Nuts - Grade C
• Zinc Plated
• Also available
cadmium plated - call
Size Part No. Qty.
Coarse Thread
1/4–20 25CCLOZ 100
5/16–18 31CCLOZ 100
3/8–16 37CCLOZ 100
7/16–14 43CCLOZ 50
1/2–13 50CCLOZ 50
9/16–12 56CCLOZ 25
5/8–11 62CCLOZ 25
3/4–10 75CCLOZ 20
7/8–9 87CCLOZ 15
1–8 100CCLOZ 10
Fine Thread
1/4–28 25FCLOZ 100
5/16–24 31FCLOZ 100
3/8–24 37FCLOZ 100
7/16–20 43FCLOZ 50
1/2–20 50FCLOZ 50
9/16–18 56FCLOZ 25
5/8–18 62FCLOZ 25
3/4–16 75FCLOZ 20
7/8–14 87FCLOZ 15
1–14 100FCLOZ 10
Slotted Nuts
• Zinc Plated
• Also available:
Flexloc™ Nuts.
Simply state: Size, style and plating
when ordering.
Size Part No. Qty.
Coarse Thread
1/4–20 25CHSNZ 100
5/16–18 31CHSNZ 100
3/8–16 37CHSNZ 100
7/16–14 43CHSNZ 100
1/2–13 50CHSNZ 100
9/16–12 56CHSNZ 100
5/8–11 62CHSNZ 100
3/4–10 75CHSNZ 100
7/8–9 87CHSNZ 100
1–8 100CHSNZ 100
Square Nuts
• Low Carbon - Zinc
Plated
Size Part No. Qty
1/4–20 25CSQNZ 100
5/16–18 31CSQNZ 100
3/8–16 37CSQNZ 100
1/2–13 50CSQNZ 50
5/8–11 62CSQNZ 25
3/4–10 75CSQNZ 20
7/8– 9 87CSQNZ 15
Coil Thread Nuts
- Plain
• See Threaded Rod
Section for coil rod
Size Part No. Qty
1/2–6 50KCNU 100
3/4–4-1/2 75KCNU 50
1–3-1/2 100KCNU 50
Hex Nuts
• Machine screw
pattern
• Zinc Plated
Size Part No. Qty.
2–56 2CMSNZ 100
3–48 3CMSNZ 100
3–56 3FMSNZ 100
4–36 4CMSNZ 100
4–40 4CMSNZ 100
4–48 4FMSNZ 100
5–40 5CMSNZ 100
6–32 6CMSNZ 100
6–40 6FMSNZ 100
8–32 8CMSNZ 100
10–24 10CMSNZ 100
10–32 10FMSNZ 100
12–24 12CMSNZ 100
1/4–20 25CMSNZ 100
Wing Nuts
• Cold forged
• Zinc Plated
Size Part No. Qty.
6–32 6CWINZ 100
8–32 8CWINZ 100
10–24 10CWINZ 100
10–32 10FWINZ 100
1/4–20 25CWINZ 100
5/16–18 31CWINZ 100
3/8–16 37CWINZ 100
7/16–14 43CWINZ 50
1/2–13 50CWINZ 100
5/8–11 62CWINZ 25
3/4–10 75CWINZ 20
Rod Coupling
Nuts
• Zinc Plated
Size Part No. Qty
1/4–20 x 7/8 25CROCZ 100
5/16–18 x 7/8 31CROCZ 100
3/8–16 x 1-1/8 37CROCZ 100
7/16–14 x 1-1/4 43CROCZ 100
1/2–13 x 1-1/4 50CROCZ 50
5/8–11 x 2-1/8 62CROCZ 25
3/4–10 x 2-1/2 75CROCZ 20
7/8–9 x 2-1/2 87CROCZ 15
1–8 x 2-3/4 100CROCZ 10
1–1/8 -7 x 3 112CROCZ 1
1–1/4-7 x 3-3/4 125CROCZ 1
1–1/2-6 x 4 150CROCZ 1
1–3/4-5 x 4-1/2 175CROCZ 1
2–4-1/2 x 5 200CROCZ 1
Long Length
3/8–16 x 1-3/4 37C175RCLZ 100
1/2–13 x 1-3/4 50C175RCLZ 100
5/8–11 x 2-3/4 62C275RCLZ 100
Reducing Rod
Coupling Nuts
• Zinc Plated
Size Part No. Qty
3/8 x 1/4 37C25RRCZ 100
3/8 x 5/16 37C31RRCZ 100
1/2 x 1/4 50C25RRCZ 100
1/2 x 5/16 50C31RRCZ 100
1/2 x 3/8 62C37RRCZ 100
5/8 x 3/8 62C50RRCZ 100
5/8 x 1/2 62C50RRCZ 100
3/4 x 5/8 75C62RRCZ 100
7/8 x 3/4 87C75RRCZ 100
1 x 7/8 100C87RRCZ 100
Tee Nuts
• 3-prong, Zinc Plated
Size Part No. Qty.
6–32 6C25TENZ/3P 100
8–32 8C25TENZ/3P 100
10–24 10C31TENZ/3P 100
10–32 10F31TENZ/3P 100
1/4–20 25C31TENZ/3P 100
5/16–18 31C37TENZ/3P 100
3/8–16 37C43TENZ/3P 100
34 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
See page 25
for B8 and B8M
Stainless Hex Nuts
STAINLESS STEEL NUTS
18-8 and 316 Stainless
Steel Finished Hex Nuts
Size 18-8 No. 316 No. Qty. WAF
Coarse Thread
1/4–20 25CHFNS 25CHFN3 100 7/16
5/16–18 31CHFNS 31CHFN3 100 1/2
3/8–16 37CHFNS 37CHFN3 100 9/16
7/16–14 43CHFNS 43CHFN3 50 11/16
1/2–13 50CHFNS 50CHFN3 50 3/4
5/8–11 62CHFNS 62CHFN3 25 15/16
3/4–10 75CHFNS 75CHFN3 20 1-1/8
7/8–9 87CHFNS 87CHFN3 15 1-5/16
1–8 100CHFNS 100CHFN3 10 1-1/2
1-1/8–7 112CHFNS 112CHFN3 10 1-11/16
1-1/4–7 125CHFNS 125CHFN3 10 1-7/8
1-1/2–6 150CHFNS 150CHFN3 5 2-1/4
Fine Thread
1/4–28 25FHFNS 25FHFN3 100 7/16
5/16–24 31FHFNS 31FHFN3 100 1/2
3/8–24 37FHFNS 37FHFN3 100 9/16
7/16–20 43FHFNS 43FHFN3 50 11/16
1/2–20 50FHFNS 50FHFN3 50 3/4
5/8–18 62FHFNS 62FHFN3 25 15/16
3/4–16 75FHFNS 75FHFN3 20 1-1/8
7/8–14 87FHFNS 87FHFN3 15 1-5/16
1–14 100FHFNS 100FHFN3 10 1-1/2
18-8 and 316 Stainless
Steel Heavy Hex Nuts
Size 18-8 No. 316 No. Qty. WAF
1/4–20 25CHFNS 25CHFN3 100 7/16
5/16–18 31CHFNS 31CHFN3 100 1/2
3/8–16 37CHFNS 37CHFN3 100 9/16
7/16–14 43CHFNS 43CHFN3 50 11/16
1/2–13 50CHFNS 50CHFN3 50 3/4
5/8–11 62CHFNS 62CHFN3 25 15/16
3/4–10 75CHFNS 75CHFN3 20 1-1/8
7/8–9 87CHFNS 87CHFN3 15 1-5/16
1–8 100CHFNS 100CHFN3 10 1-1/2
1-1/4–7 125CHFNS 125CHFN3 10 1-7/8
18-8 and 316
Stainless Steel Hex Machine
Screw Nuts
Size 18-8 No. 316 No. Qty WAF
2–56 2CMSNS 2CMSN3 100 —
4–40 4CMSNS 4CMSN3 100 3/16
6–32 6CMSNS 6CMSN3 100 1/4
8–32 8CMSNS 7CMSN3 100 1/4
10–24 10CMSNS 10CMSN3 100 5/16
10–32 10CMSNS 10CMSN3 100 5/16
12–º24 12CMSNS 12CMSN3 100 —
18-8 Stainless Steel Nylon
Insert Lock Nuts
• 316 S/S nylon insert lock nuts also
available.
Size 18-8 No. Qty. WAF
4–40 4CNMNS 100 1/4
6–32 6CNMNS 100 5/16
8–32 8CNMNS 100 11/32
10–24 10CNMNS 100 3/8
10–32 10FNMNS 100 3/8
1/4–20 25CNENS 100 7/16
5/16–18 31CNENS 100 1/2
3/8–16 37CNENS 50 9/16
1/2–13 50CNENS 25 3/4
5/8–11 62CNENS 25 15/16
3/4–10 75CNENS 20 1-1/8
18-8 Stainless Steel
Wing Nuts
Size Part No. Size Part No.
6–32 6CWINS 1/4–20 25CWINS
8–32 8CWINS 5/16–18 31CWINS
10–24 10CWINS 3/8–16 37CWINS
10–32 10FWIN 12–13 50CWINS
Be sure to visit our NEW Web Site!
www.GoNefco.com
Submittals • New Products
Online Catalog
35
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Nuts Steel - Zinc Plated
Stover Grade C
Lock Nuts
Stover Flange
Lock Nuts
Castle Nuts
Heavy Hex
Slotted Nuts
Cap (Acorn)
Finished Hex
Hex Coupling
Finished Hex
Grade 5
Finished Hex
Grade 8
Hex Machine Nut
Hex M/S Nuts Small
Pattern
Hex Jam
K-Lock Nuts
Square Machine
Nuts
Regular Square
Nuts
Hex Panel (Pipe)
Serrated Flange
Nylon Insert Stop
Tee Nuts
Cold Forged Wing
Stamped Wing
Two Way Lock
Flat Slotted
Cap Screws
Frame Bolts
Carriage Bolts
Grade 5
Carriage Bolts
Hex Cap Screws
Grade 2
Hex Cap Screws
Grade 5
Hex Cap Screws
Grade 8
Tap Bolts
Tap Bolts Grade 5
Hanger Bolts
Elevator Bolts
Step Bolts
Hex Lag Screws
Plow Bolts
Cap Screws and Bolts - Steel - Zinc Plated
Nylon Stop Nuts
Thin Pattern
FASTENER IDENTIFICATION GUIDE
Use these diagrams to help find the perfect fastener for your application.
Call and talk to someone on the sales staff today!
36 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FLAT WASHERS (USS / SAE) / FENDER WASHERS
USS Flat Washers - Steel
• Plain
• Zinc plated
• Hot Dipped Galvanized
Nominal HD Pkg. 1/4 Keg
ID Plain Zinc Galvanized Qty. (P) 50# (B)
3/16 18DFLW 18DFLWZ — 100 18100
1/4 25DFLW 25DFLWZ 25DFLWH 100 7450
5/16 31DFLW 31DFLWZ 31DFLWH 100 4500
3/8 37DFLW 37DFLWZ 37DFLWH 100 3350
7/16 43DFLW 43DFLWZ 43DFLWH 50 2050
1/2 50DFLW 50DFLWZ 50DFLWH 50 1300
9/16 56DFLW 56DFLWZ - 50 1100
5/8 62DFLW 62DFLWZ 62DFLWH 25 650
3/4 75DFLW 75DFLWZ 75DFLWH 20 450
7/8 87DFLW 87DFLWZ 87DFLWH 15 320
1 100DFLW 100DFLWZ 100DFLWH 10 260
1-1/8 112DFLW 112DFLWZ — — 225
1-1/4 125DFLW 125DFLWZ — — 190
1-3/8 137DFLW 137DFLWZ — — 150
1-1/2 150DFLW 150DFLWZ — — 130
1-5/8 162DFLW 162DFLWZ — — 117
1-3/4 175DFLW 175DFLWZ — — 100
2 200DFLW 200DFLWZ — — 79
SAE Flat Washers - Steel
• Zinc plated
Nominal Pkg. Bulk
ID Zinc Qty. (P) Qty. (B)
#6 6NSFWZ 100 Inquire
#8 8NSFWZ 100 Inquire
3/16 18DSFWZ 100 21750
1/4 25DSFWZ 100 11100
5/16 31DSFWZ 100 9600
3/8 37DSFWZ 100 7000
7/16 43DSFWZ 50 5250
1/2 50DSFWZ 50 2750
9/16 56DSFWZ 25 2250
5/8 62DSFWZ 25 1800
3/4 75DSFWZ 20 1050
7/8 87DSFWZ 15 800
1 100DSFWZ 10 600
1-1/8 112DSFWZ — 460
1-1/4 125DSFWZ — 315
1-1/2 150DSFWZ — 212
Flat Washers - Grade 8
Yellow Zinc
Nominal USS Yellow SAE Yellow
ID Zinc Zinc Qty.
1/4 25DFLW8Y 25DSFW8Y 100
5/16 31DFLW8Y 31DSFW8Y 100
3/8 37DFLW8Y 37DSFW8Y 100
7/16 43DFLW8Y 43DSFW8Y 100
1/2 50DFLW8Y 50DSFW8Y 50
9/16 56DFLW8Y 56DSFW8Y 50
5/8 62DFLW8Y 62DSFW8Y 25
3/4 75DFLW8Y 75DSFW8Y 20
7/8 87DFLW8Y 87DSFW8Y 15
1 100DFLW8Y 100DSFW8Y 10
Fender Washers
• Zinc Plated Steel
• 100 per box
Nominal ID Part No.
3/16 x 1 18D100FEWZ
3/16 x 1-1/4 18D125FEWZ
1/4 x 1 25D100FEWZ
1/4 x 1-1/4 25D125FEWZ
1/4 x 1-1/2 25D150FEWZ
1/4 x 2 25D200FEWZ
5/16 x 1-1/4 31D125FEWZ
5/16 x 1-1/2 31D150FEWZ
3/8 x 1-1/4 37D125FEWZ
3/8 x 1-1/2 37D150FEWZ
3/8 x 2 37D200FEWZ
1/2 x 1-1/2 50D150FEWZ
1/2 x 2 50D200FEWZ
MADE IN THE USA
AVAILABLE
ON REQUEST
MADE IN THE USA
AVAILABLE
ON REQUEST
• Plain Steel
• Zinc plated
• Stainless Steel
Call us with your
dimensional requirements.
Belleville Washers - Steel
37
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FLAT WASHERS (USS / SAE) - DIMENSIONS
USS Flat Washers Low Carbon Steel
Bolt Outside Dia. Inside Dia. American Std. Thickness Approx. #
Size Nominal Max. Min. Nominal Max. Min. (Gauge) Max. Min. Per 50 lb.
3/16 9/16 0.593 0.531 1/4 0.281 0.250 18 (3/64) 0.065 0.036 18050
1/4 3/4 0.781 0.719 5/16 0.343 0.312 16 (1/16) 0.080 0.051 7450
5/16 7/8 0.906 0.844 3/8 0.406 0.375 14 (5/64) 0.104 0.064 4350
3/8 1 1.031 0.969 7/16 0.469 0.438 14 (5/64) 0.104 0.064 3350
7/16 1–1/4 1.281 1.219 1/2 0.531 0.500 14 (5/64) 0.104 0.064 2050
1/2 1–3/8 1.406 1.344 9/16 0.593 0.562 12 (7/64) 0.132 0.086 1300
9/16 1–1/2 1.531 1.469 5/8 0.656 0.625 12 (7/64) 0.132 0.086 1100
5/8 1–3/4 1.781 1.719 11/16 0.719 0.688 10 (9/64) 0.160 0.108 650
3/4 2 2.031 1.969 13/16 0.843 0.812 9 (5/32) 0.177 0.122 455
7/8 2–1/4 2.281 2.219 15/16 0.969 0.938 8 (11/64) 0.192 0.136 325
1 2–1/2 2.531 2.469 1-1/16 1.094 1.063 8 (11/64) 0.192 0.136 265
1–1/8 2–3/4 2.781 2.719 1-1/4 1.281 1.250 8 (11/64) 0.192 0.136 225
1–1/4 3 3.031 2.969 1-3/8 1.406 1.375 8 (11/64) 0.192 0.136 190
1–3/8 3–1/4 3.281 3.219 1-1/2 1.531 1.500 7 (3/16) 0.213 0.153 150
1–1/2 3–1/2 3.531 3.469 1-5/8 1.656 1.625 7 (3/16) 0.213 0.153 130
1–5/8 3–3/4 3.813 3.687 1-3/4 1.813 1.750 7 (3/16) 0.213 0.153 115
1–3/4 4 4.063 3.937 1-7/8 1.938 1.875 7 (3/16) 0.213 0.153 100
1–7/8 4–1/4 4.313 4.187 2 2.063 2.000 7 (3/16) 0.213 0.153 90
2 4–1/2 4.563 4.437 2-1/8 2.188 2.125 7 (3/16) 0.213 0.153 79
2–1/4 4–3/4 4.813 4.687 2-3/8 2.438 2.375 5 (7/32) 0.248 0.193 60
2–1/2 5 5.063 4.937 2-5/8 2.688 2.625 4 (15/64) 0.280 0.210 52
2-3/4 5-1/4 5.313 5.187 2-7/8 2.938 2.875 3 (1/4) 0.310 0.228 45
3 5-1/2 5.563 5.437 3-1/8 3.188 3.125 2 (5/32) 0.327 0.249 43
SAE Flat Washers Low Carbon Steel
Bolt Outside Dia. Inside Dia. American Std. Thickness Approx. #
Size Nominal Max. Min. Nominal Max. Min. (Gauge) Max. Min. Per 50 lb.
6 3/8 0.406 0.344 5/32 0.187 0.156 18 (3/64) .065 .036 39500
8 7/16 0.469 0.407 3/16 0.219 0.188 18 (3/64) .065 .036 29500
3/16 1/2 0.531 0.469 7/32 0.250 0.219 18 (3/64) .065 .036 22750
1/2 9/16 0.583 0.531 1/4 0.281 0.250 16 (1/16) .080 .051 14700
1/4 5/8 0.656 0.594 9/32 0.312 0.281 16 (1/16) .080 .051 11100
5/16 11/16 0.719 0.657 11/32 0.375 0.344 16 (1/16) .080 .051 9750
3/8 13/16 0.843 0.781 13/32 0.437 0.406 16 (1/16) .080 .051 7000
7/16 59/64 0.953 0.891 15/32 0.500 0.469 16 (1/16) .080 .051 5500
1/2 1-1/16 1.093 1.031 17/32 0.562 0.531 13 (3/32) .121 .074 2800
9/16 1-3/16 1.219 1.157 19/32 0.625 0.594 13 (3/32) .121 .074 2250
5/8 1-5/16 1.343 1.281 21/32 0.687 0.656 13 (3/32) .121 .074 1850
3/4 1-1/2 1.531 1.469 13/16 0.843 0.812 10 (9/64) .160 .108 1050
7/8 1-3/4 1.781 1.719 15/16 0.969 0.938 10 (9/64) .160 .108 775
1 2 2.031 1.969 1-1/16 1.094 1.062 10 (9/64) .160 .108 585
1-1/8 2-1/4 2.313 2.187 1-3/16 1.251 1.188 10 (9/64) .160 .108 460
1-1/4 2-1/2 2.563 2.437 1-5/16 1.375 1.312 9 (5/32) .192 .136 335
1-3/8 2-3/4 2.813 2.687 1-7/16 1.501 1.438 9 (5/32) .213 .136 275
1-1/2 3 3.063 2.937 1-9/16 1.625 1.562 9 (5/32) .213 .153 230
MADE IN THE USA
AVAILABLE
ON REQUEST
38 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LOCK WASHERS
Split Lock Washers
• Plain and Zinc Plated
Nominal Part No. Part No.
ID Plain Zinc Qty.
2 — 2DLOWZ 1000
3 — 3DLOWZ 1000
4 — 4DLOWZ 1000
5 — 5DLOWZ 1000
6 — 6DLOWZ 1000
8 — 8DLOWZ 100
10 — 10DLOWZ 100
12 — 12DLOWZ 100
1/4 25DLOW 25DLOWZ 100
5/16 31DLOW 31DLOWZ 100
3/8 37DLOW 37DLOWZ 100
7/16 43DLOW 43DLOWZ 100
1/2 50DLOW 50DLOWZ 50
9/16 56DLOW 56DLOWZ 50
5/8 62DLOW 62DLOWZ 25
3/4 75DLOW 75DLOWZ 20
7/8 87DLOW 87DLOWZ 15
1 100DLOW 100DLOWZ 10
1–1/8 — 112DLOWZ 5
1–1/4 — 125DLOWZ 5
1–1/2 — 150DLOWZ 5
Split Lock Washers Grade 8
• Yellow Zinc
Nominal ID Part No. Qty.
1/4 25DLOW8Y 100
5/16 31DLOW8Y 100
3/8 37DLOW8Y 100
7/16 43DLOW8Y 100
1/2 50DLOW8Y 50
9/16 56DLOW8Y 50
5/8 62DLOW8Y 25
3/4 75DLOW8Y 25
7/8 87DLOW8Y 15
1 100DLOW8Y 10
Hi Collar Lock Washers
• For use with 1960 Series
Socket Head Cap Screws
• May also be used to shorten
Socket Head Screws or Shoulder Bolts
Nominal ID Part No. Qty.
#8 8NHCL 100
#10 10NHCL 100
1/4 25NHCL 100
5/16 31NHCL 100
3/8 37NHCL 100
7/16 43NHCL 100
1/2 50NHCL 100
5/8 62NHCL 100
3/4 75NHCL 100
7/8 87NHCL 100
1 100NHCL 50
1-1/4 125NHCL 5
Split Lock Washers
• Galvanized
Nominal ID Part No. Qty.
1/4 25DLOWH 100
5/16 31DLOWH 100
3/8 37DLOWH 100
1/2 50DLOWH 50
5/8 62DLOWH 25
3/4 75DLOWH 25
7/8 87DLOWH 15
1 100DLOWH 10
18-8 & 316 Stainless Steel
Split Lock Washers
Nominal Part No. Part No.
ID x OD 18-8 316 Qty.
8 8NLOWS 8NLOW3 100
10 10NLOWS 10NLOW3 100
1/4 25NLOWS 25NLOW3 100
5/16 31NLOWS 31NLOW3 100
3/8 38NLOWS 38NLOW3 100
7/16 43NLOWS 43NLOW3 100
1/2 50NLOWS 50NLOW3 100
5/8 62NLOWS 62NLOW3 100
3/4 75NLOWS 75NLOW3 100
7/8 87NLOWS 87NLOW3 100
1 100NLOWS 100NLOW3 100
Internal / External Tooth
Lock Washers
• Also referred to as "Star Lock
Washers"
• Combination and Countersunk style available upon
request
Nominal ID Internal External Qty.
#1 1NILWZ 1NELWZ 1000
#2 2NILWZ 2NELWZ 1000
#3 3NILWZ 3NELWZ 1000
#4 4NILWZ 4NELWZ 1000
#5 5NILWZ 5NELWZ 1000
#6 6NILWZ 6NELWZ 1000
#8 8NILWZ 8NELWZ 1000
#10 10NILWZ 10NELWZ 1000
#12 12NILWZ 12NELWZ 1000
1/4 25NILWZ 25NELWZ 1000
5/16 31NILWZ 31NELWZ 1000
3/8 37NILWZ 37NELWZ 1000
7/16 43NILWZ 43NELWZ 500
1/2 50NILWZ 50NELWZ 1000
9/16 56NILWZ 56NELWZ 500
5/8 62NILWZ 62NELWZ 250
3/4 75NILWZ 75NELWZ 100
7/8 87NILWZ 87NELWZ 100
39
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WASHERS
Machine Screw Flat Washers
Nominal ID Part No. Qty.
#2 2NMSWZ 100
#4 4NMSWZ 100
#5 5NMSWZ 100
#6 6NMSWZ 100
#8 8NMSWZ 100
#10 10NMSWZ 100
#12 12NMSWZ 100
Fender Washers
• Zinc Plated Steel
Nominal ID Part No. Qty.
3/16 x 1 18D100FEWZ 100
3/16 x 1-1/4 18D125FEWZ 100
1/4 x 1 25D100FEWZ 100
1/4 x 1-1/4 25D125FEWZ 100
1/4 x 1-1/2 25D150FEWZ 100
1/4 x 2 25D200FEWZ 100
5/16 x 1-1/4 31D125FEWZ 100
5/16 x 1-1/2 31D150FEWZ 100
3/8 x 1-1/4 37D125FEWZ 100
3/8 x 1-1/2 37D150FEWZ 100
3/8 x 2 37D200FEWZ 100
1/2 x 1-1/2 50D150FEWZ 100
1/2 x 2 50D200FEWZ 100
Countersunk Finish Washers
• Nickel Plated Steel
Nominal ID Part No. Qty.
#6 6NCFWI 100
#8 8NCFWI 100
#10 10NCFWI 100
#12 12NCFWI 100
#14 14NCFWI 100
F436 Structural Flat Washers
• For use with A325 Bolts
Nominal Part No. Part No.
ID Plain HD Galvanized Qty.
1/2 50DA3W 50DA3WH 1250
5/8 62DA3W 62DA3WH 625
3/4 75DA3W 75DA3WH 625
7/8 87DA3W 87DA3WH 312
1 100DA3W 100DA3WH 250
1-1/8 112DA3W 112DA3WH 187
1-1/4 125DA3W 125DA3WH 150
1-1/2 150DA3W 150DA3WH 125
18-8 and 316 Stainless Steel
USS Flat Washers
Nominal Part No. Part No.
ID 18-8 316 Qty.
1/4 25DFLWS 25DFLW3 100
5/16 31DFLWS 31DFLW3 100
3/8 37DFLWS 37DFLW3 100
1/2 50DFLWS 50DFLW3 100
5/8 62DFLWS 62DFLW3 25
3/4 75DFLWS 75DFLW3 20
7/8 87DFLWS 87DFLW3 15
1 100DFLWS 100DFLW3 10
1-1/8 112DFLWS 112DFLW3 10
1-1/4 125DFLWS 125DFLW3 10
1-1/2 150DFLWS 150DFLW3 10
18-8 and 316 Stainless Steel
Fender Washers
Nominal Part No. Part No.
ID x OD 18-8 316
1/4 x 1-1/4 25D125FEWS 25D125FEW3
1/4 x 1-1/2 25D150FEWS 25D150FEW3
5/16 x 1-1/4 31D125FEWS —
5/16 x 1-1/2 31D150FEWS 31D150FEW3
3/8 x 1-1/4 37D125FEWS —
3/8 x 1-1/2 37D150FEWS 37D150FEW3
1/2 x 1-1/2 50D150FEWS 50D150FEW3
1/2 x 2 50D200FEWS 50D200FEW3
Bonded Sealing Washers
• Zinc Plated Steel / Neoprene
• Stainless Steel / Neoprene
Nominal Part No. Part No.
ID x OD Zinc Stainless Qty.
8 x 1/2 8N50BSW — 100
10 x 1/2 10N50BSW 10N50BSWS 100
10 x 5/8 10N62BSW 10N62BSWS 100
12 x 5/8 12N62BSW 12N62BSWS 100
14 x 5/8 14N62BSW 14N62BSWS 100
3/8 x 3/4 37D75BSW 37D75BSWS 100
1/2 x 1 50D100BSW 50D100BSWS 100
Duc Lug
• Ductile Iron
• For 4" - 12" pipe
• 50/box
Part No.
0UDUL/P
Socket Washer
• Steel, plain or electro-plated finish
• For use with B3134 four-bolt
underground clamp to secure rods.
Part Tie Rod For Use w/ (inches) Qty/
No. Size Pipe Size 'D' 'E' 'F' lb.
75DSCW 3/4"–10 4" – 8" 7/8 3 1/2 119
100DSCW 1"–9 10" – 12" 1-1/8 3-1/2 1/2 159
112DSCW 1-1/8"–7 14" – 16" 1-1/4 3-1/2 5/8 181
125DSCW 1-1/4"–7 18" 1-3/8 3-1/2 3/4 229
137DSCW 1-3/8"–6 20" 1-1/2 3-1/2 3/4 223
150DSCW 1-1/2"–6 24" 1-5/8 3-1/2 3/4 217
40 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROUND COMBO MACHINE SCREWS
Round Combo Phillips / Slotted Head Machine Screws
• Zinc Plated Steel
Length Part No. Qty.
2 - 56 Nominal Size and Threads
3/16 2C18RCMZ 100
1/4 2C25RCMZ 100
5/16 2C31RCMZ 100
1/2 2C50RCMZ 100
4 - 40 Nominal Size and Threads
3/16 4C18RCMZ 100
1/4 4C25RCMZ 100
5/16 4C31RCMZ 100
3/8 4C37RCMZ 100
7/16 4C43RCMZ 100
1/2 4C50RCMZ 100
5/8 4C62RCMZ 100
3/4 4C75RCMZ 100
7/8 4C87RCMZ 100
1 4C100RCMZ 100
1-1/4 4C125RCMZ 100
1-1/2 4C150RCMZ 100
6 - 32 Nominal Size and Threads
3/16 6C18RCMZ 100
1/4 6C25RCMZ 100
5/16 6C31RCMZ 100
3/8 6C37RCMZ 100
7/16 6C43RCMZ 100
1/2 6C50RCMZ 100
5/8 6C62RCMZ 100
3/4 6C75RCMZ 100
7/8 6C87RCMZ 100
1 6C100RCMZ 100
1-1/4 6C125RCMZ 100
1-1/2 6C150RCMZ 100
1-3/4 6C175RCMZ 100
2 6C200RCMZ 100
2-1/4 6C225RCMZ 100
2-1/2 6C250RCMZ 100
2-3/4 6C275RCMZ 100
3 6C300RCMZ 100
4 6C400RCMZ 100
8 - 32 Nominal Size and Threads
3/16 8C18RCMZ 100
1/4 8C25RCMZ 100
5/16 8C31RCMZ 100
3/8 8C37RCMZ 100
7/16 8C43RCMZ 100
1/2 8C50RCMZ 100
5/8 8C62RCMZ 100
3/4 8C75RCMZ 100
7/8 8C87RCMZ 100
1 8C100RCMZ 100
1-1/4 8C125RCMZ 100
1-1/2 8C150RCMZ 100
1-3/4 8C175RCMZ 100
2 8C200RCMZ 100
1-1/4 8C225RCMZ 100
2-1/2 8C250RCMZ 100
2-3/4 8C275RCMZ 100
Length Part No. Qty.
8 - 32 Nominal Size and Threads
3 8C300RCMZ 100
3-1/2 8C350RCMZ 100
4 8C400RCMZ 100
10 - 24 Nominal Size and Threads
1/4 10C25RCMZ 100
5/16 10C31RCMZ 100
3/8 10C37RCMZ 100
7/16 10C41RCMZ 100
1/8 10C50RCMZ 100
5/8 10C62RCMZ 100
3/4 10C75RCMZ 100
7/8 10C87RCMZ 100
1 10C100RCMZ 100
1-1/4 10C125RCMZ 100
1-1/2 10C150RCMZ 100
1-3/4 10C175RCMZ 100
2 10C200RCMZ 100
2-1/4 10C225RCMZ 100
2-1/2 10C250RCMZ 100
2-3/4 10C275RCMZ 100
3 10C300RCMZ 100
3-1/2 10C350RCMZ 100
4 10C400RCMZ 100
4-1/2 10C450RCMZ 100
5 10C500RCMZ 100
5-1/2 10C550RCMZ 100
6 10C600RCMZ 100
10 - 32 Nominal Size and Threads
1/4 10F25RCMZ 100
5/16 10F31RCMZ 100
3/8 10F37RCMZ 100
7/16 10F43RCMZ 100
1/2 10F50RCMZ 100
5/8 10F62RCMZ 100
3/4 10F75RCMZ 100
7/8 10F87RCMZ 100
1 10F100RCMZ 100
1-1/4 10F125RCMZ 100
1-1/2 10F150RCMZ 100
1-3/4 10F175RCMZ 100
2 10F200RCMZ 100
2-1/4 10F225RCMZ 100
2-1/2 10F250RCMZ 100
2-3/4 10F275RCMZ 100
3 10F300RCMZ 100
3-1/2 10F350RCMZ 100
4 10F400RCMZ 100
12 - 24 Nominal Size and Threads
5/16 12C31RCMZ 100
3/8 12C37RCMZ 100
1/2 10F50RCMZ 100
5/8 12C62RCMZ 100
3/4 12C75RCMZ 100
7/8 10F87RCMZ 100
1 12C100RCMZ 100
Length Part No. Qty.
12 - 24 Nominal Size and Threads
1-1/4 12C125RCMZ 100
1-1/2 12C150RCMZ 100
2 12C150RCMZ 100
2-1/2 12C250RCMZ 100
3 12C300RCMZ 100
1/4 - 20 Nominal Size and Threads
1/4 25C25RCMZ 100
5/16 25C31RCMZ 100
3/8 25C37RCMZ 100
7/16 25C43RCMZ 100
1/2 25C50RCMZ 100
5/8 25C62RCMZ 100
3/4 25C75RCMZ 100
7/8 25C87RCMZ 100
1 25C100RCMZ 100
1-1/4 25C125RCMZ 100
1-1/2 25C150RCMZ 100
1-3/4 25C175RCMZ 100
2 25C200RCMZ 100
2-1/4 25C225RCMZ 100
2-1/2 25C250RCMZ 100
2-3/4 25C275RCMZ 100
3 25C300RCMZ 100
3-1/2 25C350RCMZ 100
4 25C400RCMZ 100
4-1/2 25C450RCMZ 100
5 25C500RCMZ 100
5-1/2 25C550RCMZ 100
6 25C600RCMZ 100
5/16 - 18 Nominal Size and Threads
1/2 31C50RCMZ 100
5/8 31C62RCMZ 100
3/4 31C75RCMZ 100
7/8 31C87RCMZ 100
1 31C100RCMZ 100
1-1/4 31C125RCMZ 100
1-1/2 31C150RCMZ 100
1-3/4 31C175RCMZ 100
2 31C200RCMZ 100
1-1/4 31C225RCMZ 100
2-1/2 31C250RCMZ 100
2-3/4 31C275RCMZ 100
3 31C300RCMZ 100
3-1/2 31C350RCMZ 100
4 31C400RCMZ 100
4-1/2 31C450RCMZ 100
5 31C500RCMZ 100
5-1/2 31C550RCMZ 100
6 31C600RCMZ 100
3/8 - 16 Nominal Size and Threads
1/2 37C50RCMZ 100
5/8 37C62RCMZ 100
3/4 37C75RCMZ 100
7/8 37C87RCMZ 100
1 37C100RCMZ 100
41
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ROUND COMBO MACHINE SCREWS
Round Combo
Phillips/Slotted Head
Machine Screws - Cont.
Length Part No. Qty.
3/8 - 16 Nominal Size and Threads
1-1/4 37C125RCMZ 100
1-1/2 37C150RCMZ 100
1-3/4 37C175RCMZ 100
2 37C200RCMZ 100
2-1/4 37C225RCMZ 100
2-1/2 37C250RCMZ 100
2-3/4 37C275RCMZ 100
3 37C300RCMZ 100
3-1/2 37C350RCMZ 100
4 37C400RCMZ 100
4-1/2 37C450RCMZ 100
5 37C500RCMZ 100
1/2 - 13 Nominal Size and Threads
1 50C100RCMZ 100
1-1/4 50C125RCMZ 100
1-1/2 50C150RCMZ 100
1-3/4 50C175RCMZ 100
2 50C200RCMZ 100
2-1/2 50C250RCMZ 100
3 50C300RCMZ 100
3-1/2 50C350RCMZ 100
4 50C400RCMZ 100
4-1/2 50C450RCMZ 100
5 50C500RCMZ 50
6 50C600RCMZ 50
Slotted Truss Head Machine Screws
Length Part No. Qty.
6 - 32 Nominal Size and Threads
1/4 6C25TSMZ 100
5/16 6C31TSMZ 100
3/8 6C37TSMZ 100
1/2 6C50TSMZ 100
5/8 6C62TSMZ 100
3/4 6C75TSMZ 100
1 6C100TSMZ 100
1-1/2 6C150TSMZ 100
2 6C200TSMZ 100
3 6C300TSMZ 100
4 6C400TSMZ 100
8 - 32 Nominal Size and Threads
1/4 8C25TSMZ 100
5/16 8C31TSMZ 100
3/8 8C37TSMZ 100
1/2 8C50TSMZ 100
5/8 8C62TSMZ 100
3/4 8C75TSMZ 100
1 8C100TSMZ 100
1-1/4 8C125TSMZ 100
1-1/2 8C150TSMZ 100
10 - 24 Nominal Size and Threads
1/4 10C25TSMZ 100
5/16 10C31TSMZ 100
3/8 10C37TSMZ 100
1/2 10C50TSMZ 100
5/8 10C62TSMZ 100
3/4 10C75TSMZ 100
Length Part No. Qty.
10 - 24 Nominal Size and Threads
1 10C100TSMZ 100
1-1/4 10C125TSMZ 100
1-1/2 10C150TSMZ 100
2 10C200TSMZ 100
2-1/2 10C250TSMZ 100
10 - 32 Nominal Size and Threads
3/16 10F18TSMZ 100
1/4 10F25TSMZ 100
3/8 10F37TSMZ 100
1/2 10F50TSMZ 100
5/8 10F62TSMZ 100
3/4 10F75TSMZ 100
1 10F100TSMZ 100
1-1/4 10F125TSMZ 100
1-1/2 10F150TSMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37TSMZ 100
1/2 25C50TSMZ 100
5/8 25C62TSMZ 100
3/4 25C75TSMZ 100
7/8 25C87TSMZ 100
1 25C100TSMZ 100
1-1/4 25C125TSMZ 100
1-1/2 25C150TSMZ 100
2 25C200TSMZ 100
2-1/2 25C250TSMZ 100
3 25C300TSMZ 100
4 25C400TSMZ 100
Refer to Anchors Section for more information.
Anchors Section starts on page 65.
42 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MACHINE SCREWS
Pan Slotted Machine Screws
• Zinc Plated Steel
Length Part No. Qty.
2 - 56 Nominal Size and Threads
3/16 2C18PSMZ 100
1/2 2C50PSMZ 100
3/4 2C75PSMZ 100
4 - 40 Nominal Size and Threads
3/16 4C18PSMZ 100
1/4 4C25PSMZ 100
5/16 4C31PSMZ 100
3/8 4C37PSMZ 100
1/2 4C50PSMZ 100
5/8 4C62PSMZ 100
3/4 4C75PSMZ 100
7/8 4C87PSMZ 100
1 4C100PSMZ 100
1-1/2 4C150PSMZ 100
6 - 32 Nominal Size and Threads
3/16 6C18PSMZ 100
1/4 6C25PSMZ 100
5/16 6C31PSMZ 100
3/8 6C37PSMZ 100
1/2 6C50PSMZ 100
5/8 6C62PSMZ 100
3/4 6C75PSMZ 100
7/8 6C87PSMZ 100
1 6C100PSMZ 100
1-1/4 6C125PSMZ 100
1-1/2 6C150PSMZ 100
Length Part No. Qty.
6 - 32 Nominal Size and Threads
1-3/4 6C175PSMZ 100
2 6C200PSMZ 100
8 - 32 Nominal Size and Threads
3/16 8C18PSMZ 100
1/4 8C25PSMZ 100
5/16 8C31PSMZ 100
3/8 8C37PSMZ 100
1/2 8C40PSMZ 100
5/8 8C62PSMZ 100
3/4 8C75PSMZ 100
7/8 8C87PSMZ 100
1 8C100PSMZ 100
1-1/4 8C125PSMZ 100
1-1/2 8C150PSMZ 100
1-3/4 8C175PSMZ 100
2 8C200PSMZ 100
2-1/2 8C250PSMZ 100
10 - 24 Nominal Size and Threads
1/4 10C25PSMZ 100
5/16 10C31PSMZ 100
3/8 10C37PSMZ 100
1/2 10C50PSMZ 100
5/8 10C62PSMZ 100
3/4 10C75PSMZ 100
7/8 10C87PSMZ 100
1 10C100PSMZ 100
Length Part No. Qty.
10 - 24 Nominal Size and Threads
1-1/4 10C125PSMZ 100
1-1/2 10C150PSMZ 100
2 10C200PSMZ 100
10 - 32 Nominal Size and Threads
1/4 10F25PSMZ 100
5/16 10F31PSMZ 100
3/8 10F37PSMZ 100
1/2 10F50PSMZ 100
5/8 10F62PSMZ 100
3/4 10F75PSMZ 100
7/8 10F87PSMZ 100
1 10F100PSMZ 100
1-1/4 10F125PSMZ 100
1-1/2 10F150PSMZ 100
2 10F200PSMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37PSMZ 100
1/2 25C50PSMZ 100
5/8 25C62PSMZ 100
3/4 25C75PSMZ 100
7/8 25C87PSMZ 100
1 25C100PSMZ 100
1-1/4 25C125PSMZ 100
1-1/2 25C150PSMZ 100
2 25C200PSMZ 100
2-1/2 25C250PSMZ 100
Pan Phillips Machine Screws
• Zinc Plated Steel
Length Part No. Qty.
8 - 32 Nominal Size and Threads
7/16 8C43PPMZ 100
1/2 8C50PPMZ 100
5/8 8C62PPMZ 100
3/4 8C75PPMZ 100
7/8 8C87PPMZ 100
1 8C100PPMZ 100
1-1/2 8C150PPMZ 100
10 - 24 Nominal Size and Threads
1/4 10C25PPMZ 100
5/16 10C31PPMZ 100
3/8 10C37PPMZ 100
7/16 10C43PPMZ 100
1/2 10C50PPMZ 100
5/8 10C62PPMZ 100
Length Part No. Qty.
10 - 24 Nominal Size and Threads
3/4 10C75PPMZ 100
1 10C100PPMZ 100
1-1/4 10C125PPMZ 100
1-1/2 10C150PPMZ 100
1-3/4 10C175PPMZ 100
2 10C200PPMZ 100
10 - 32 Nominal Size and Threads
1/4 10F25PPMZ 100
5/16 10F31PPMZ 100
7/16 10F43PPMZ 100
1/2 10F50PPMZ 100
5/8 10F62PPMZ 100
3/4 10F75PPMZ 100
1 10F100PPMZ 100
Length Part No. Qty.
10 - 32 Nominal Size and Threads
1-1/4 10F125PPMZ 100
1-1/2 10F150PPMZ 100
2 10F200PPMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37PPMZ 100
1/2 25C50PPMZ 100
5/8 25C62PPMZ 100
3/4 25C75PPMZ 100
7/8 25C87PPMZ 100
1 25C100PPMZ 100
1-1/4 25C125PPMZ 100
1-1/2 25C150PPMZ 100
1-3/4 25C175PPMZ 100
2 25C200PPMZ 100
43
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MACHINE SCREWS
Flat Slotted Machine Screws
• Zinc Plated Steel
Length Part No. Qty.
4 - 40 Nominal Size and Threads
1/4 4C25FSMZ 100
5/16 4C31FSMZ 100
3/8 4C37FSMZ 100
1/2 4C50FSMZ 100
5/8 4C62FSMZ 100
3/4 4C75FSMZ 100
1 4C100FSMZ 100
1-1/4 4C125FSMZ 100
1-1/2 4C150FSMZ 100
5 - 40 Nominal Size and Threads
1/4 5C25FSMZ 100
5/16 5C31FSMZ 100
3/8 5C37FSMZ 100
1/2 5C50FSMZ 100
5/8 5C62FSMZ 100
3/4 5C75FSMZ 100
7/8 5C87FSMZ 100
1 5C100FSMZ 100
1-1/2 5C150FSMZ 100
2 5C200FSMZ 100
6 - 32 Nominal Size and Threads
3/16 6C18FSMZ 100
1/4 6C25FSMZ 100
5/16 6C31FSMZ 100
3/8 6C37FSMZ 100
1/2 6C50FSMZ 100
5/8 6C62FSMZ 100
3/4 6C75FSMZ 100
1 6C100FSMZ 100
1-1/4 6C125FSMZ 100
1-1/2 6C150FSMZ 100
1-3/4 6C175FSMZ 100
2 6C200FSMZ 100
2-1/4 6C225FSMZ 100
2-1/2 6C250FSMZ 100
3 6C300FSMZ 100
4 6C400FSMZ 100
8 - 32 Nominal Size and Threads
3/16 8C18FSMZ 100
1/4 8C25FSMZ 100
5/16 8C31FSMZ 100
3/8 8C37FSMZ 100
1/2 8C50FSMZ 100
5/8 8C62FSMZ 100
3/4 8C75FSMZ 100
7/8 8C87FSMZ 100
1 8C100FSMZ 100
1-1/4 8C125FSMZ 100
1-1/2 8C150FSMZ 100
1-3/4 8C175FSMZ 100
2 8C200FSMZ 100
2-1/4 8C225FSMZ 100
2-1/2 8C250FSMZ 100
2-3/4 8C275FSMZ 100
3 8C300FSMZ 100
4 8C400FSMZ 100
10 - 24 Nominal Size and Threads
1/4 10C25FSMZ 100
5/16 10C31FSMZ 100
3/8 10C37FSMZ 100
Length Part No. Qty.
10 - 24 Nominal Size and Threads
1/2 10C50FSMZ 100
5/8 10C62FSMZ 100
3/4 10C75FSMZ 100
7/8 10C87FSMZ 100
1 10C100FSMZ 100
1-1/4 10C125FSMZ 100
1-1/2 10C150FSMZ 100
1-3/4 10C175FSMZ 100
2 10C200FSMZ 100
2-1/4 10C225FSMZ 100
2-1/2 10C250FSMZ 100
2-3/4 10C275FSMZ 100
3 10C300FSMZ 100
4 10C400FSMZ 100
4-1/2 10C450FSMZ 100
5 10C500FSMZ 100
6 10C600FSMZ 100
10 - 32 Nominal Size and Threads
1/4 10F25FSMZ 100
5/16 10F31FSMZ 100
3/8 10F37FSMZ 100
1/2 10F50FSMZ 100
5/8 10F62FSMZ 100
3/4 10F75FSMZ 100
7/8 10F87FSMZ 100
1 10F100FSMZ 100
1-1/4 10F125FSMZ 100
1-1/2 10F150FSMZ 100
1-3/4 10F175FSMZ 100
2 10F200FSMZ 100
2-1/4 10F225FSMZ 100
2-1/2 10F250FSMZ 100
3 10F300FSMZ 100
4 10F400FSMZ 100
12 - 24 Nominal Size and Threads
3/8 12C37FSMZ 100
1/2 12C50FSMZ 100
5/8 12C62FSMZ 100
3/4 12C75FSMZ 100
7/8 12C87FSMZ 100
1 12C100FSMZ 100
1-1/4 12C135FSMZ 100
1-1/2 12C150FSMZ 100
1-3/4 12C175FSMZ 100
2 12C200FSMZ 100
2-1/2 12C250FSMZ 100
3 12C300FSMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37FSMZ 100
1/2 25C50FSMZ 100
5/8 25C62FSMZ 100
3/4 25C75FSMZ 100
7/8 25C87FSMZ 100
1 25C100FSMZ 100
1-1/4 25C125FSMZ 100
1-1/2 25C150FSMZ 100
1-3/4 25C175FSMZ 100
2 25C200FSMZ 100
2-1/4 25C225FSMZ 100
2-1/2 25C250FSMZ 100
Length Part No. Qty.
1/4 - 20 Nominal Size and Threads
2-3/4 25C275FSMZ 100
3 25C300FSMZ 100
3-1/2 25C350FSMZ 100
4 25C400FSMZ 100
4-1/2 25C450FSMZ 100
5 25C500FSMZ 100
6 25C600FSMZ 100
5/16 - 18 Nominal Size and Threads
1/2 31C50FSMZ 100
5/8 31C62FSMZ 100
3/4 31C75FSMZ 100
7/8 31C87FSMZ 100
1 31C100FSMZ 100
1-1/4 31C125FSMZ 100
1-1/2 31C150FSMZ 100
1-3/4 31C175FSMZ 100
2 31C200FSMZ 100
2-1/4 31C225FSMZ 100
2-1/2 31C250FSMZ 100
2-3/4 31C275FSMZ 100
3 31C300FSMZ 100
3-1/2 31C350FSMZ 100
4 31C400FSMZ 100
4-1/2 31C450FSMZ 100
5 31C500FSMZ 100
6 31C600FSMZ 100
3/8 - 16 Nominal Size and Threads
1/2 37C50FSMZ 100
5/8 37C62FSMZ 100
3/4 37C75FSMZ 100
7/8 37C87FSMZ 100
1 37C100FSMZ 100
1-1/4 37C125FSMZ 100
1-1/2 37C150FSMZ 100
1-3/4 37C175FSMZ 100
2 37C200FSMZ 100
2-1/4 37C225FSMZ 50
2-1/2 37C250FSMZ 50
2-3/4 37C275FSMZ 100
3 37C300FSMZ 50
3-1/2 37C350FSMZ 50
4 37C400FSMZ 100
4-1/2 37C450FSMZ 50
5 37C500FSMZ 50
6 37C600FSMZ 50
1/2 - 13 Nominal Size and Threads
1 50C100FSMZ 50
1-1/4 50C125FSMZ 50
1-1/2 50C150FSMZ 50
1-3/4 50C175FSMZ 50
2 50C200FSMZ 50
2-1/4 50C225FSMZ 50
2-1/2 50C250FSMZ 50
3 50C300FSMZ 25
3-1/2 50C350FSMZ 50
4 50C400FSMZ 25
4-1/2 50C450FSMZ 25
5 50C500FSMZ 50
6 50C600FSMZ 25
44 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MACHINE SCREWS
Fillister Head Screws
• More material in the head of the
fastener for strength.
• Zinc Plated Steel
Length Part No. Qty.
4 - 40 Nominal Size and Threads
1/4 4C25FIMZ 100
3/8 4C37FIMZ 100
1/2 4C50FIMZ 100
5/8 4C62FIMZ 100
3/4 4C75FIMZ 100
1 44C100FIMZ 100
6 - 32 Nominal Size and Threads
1/4 6C25FIMZ 100
3/8 6C37FIMZ 100
1/2 6C50FIMZ 100
5/8 6C62FIMZ 100
3/4 6C75FIMZ 100
1 6C100FIMZ 100
1-1/2 6C150FIMZ 100
2 6C200FIMZ 100
Length Part No. Qty.
8 - 32 Nominal Size and Threads
1/4 8C25FIMZ 100
3/8 8C37FIMZ 100
1/2 8C50FIMZ 100
5/8 8C62FIMZ 100
3/4 8C75FIMZ 100
1 8C100FIMZ 100
1-1/4 8C125FIMZ 100
1-1/2 8C150FIMZ 100
2 8C200FIMZ 100
10 - 24 Nominal Size and Threads
3/8 10C37FIMZ 100
1/2 10C50FIMZ 100
5/8 10C62FIMZ 100
3/4 10C75FIMZ 100
1 10C100FIMZ 100
1-1/4 10C125FIMZ 100
1-1/2 10C150FIMZ 100
Length Part No. Qty.
10 - 32 Nominal Size and Threads
1/4 10F25FIMZ 100
3/8 10F37FIMZ 100
1/2 10F50FIMZ 100
5/8 10F62FIMZ 100
3/4 10F75FIMZ 100
1 10F100FIMZ 100
1-1/4 10F125FIMZ 100
1-1/2 10F150FIMZ 100
2 10F200FIMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37FIMZ 100
1/2 25C50FIMZ 100
5/8 25C62FIMZ 100
3/4 25C75FIMZ 100
7/8 25C87FIMZ 100
1 25C100FIMZ 100
1-1/4 25C125FIMZ 100
1-1/2 25C150FIMZ 100
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
Flat Phillips Machine Screws
• Zinc Plated Steel
Length Part No. Qty.
4 - 40 Nominal Size and Threads
1/4 4C25FPMZ 100
5/16 4C31FPMZ 100
3/8 4C37FPMZ 100
1/2 4C50FPMZ 100
3/4 4C75FPMZ 100
6 - 32 Nominal Size and Threads
1/4 6C25FPMZ 100
5/16 6C31FPMZ 100
3/8 6C37FPMZ 100
1/2 6C50FPMZ 100
1 6C100FPMZ 100
1-1/4 6C125FPMZ 100
8 - 32 Nominal Size and Threads
1/4 8C25FPMZ 100
5/16 8C31FPMZ 100
3/8 8C37FPMZ 100
Length Part No. Qty.
8 - 32 Nominal Size and Threads
1/2 8C50FPMZ 100
3/4 8C75FPMZ 100
1 8C100FPMZ 100
1-1/4 8C125FPMZ 100
1-1/2 8C150FPMZ 100
2 8C20FPMZ 100
10 - 24 Nominal Size and Threads
5/16 10C31FPMZ 100
3/8 10C37FPMZ 100
1/2 10C50FPMZ 100
5/8 10C62FPMZ 100
3/4 10C75FPMZ 100
1 10C100FPMZ 100
1-1/4 10C125FPMZ 100
1-1/2 10C150FPMZ 100
2 10C200FPMZ 100
Length Part No. Qty.
10 - 32 Nominal Size and Threads
5/16 10F31FPMZ 100
3/8 10F37FPMZ 100
1/2 10F50FPMZ 100
5/8 10F62FPMZ 100
3/4 10F75FPMZ 100
1 10F100FPMZ 100
1-1/4 10F125FPMZ 100
1-1/2 10F150FPMZ 100
2 10F200FPMZ 100
1/4 - 20 Nominal Size and Threads
3/8 25C37FPMZ 100
1/2 25C50FPMZ 100
5/8 25C62FPMZ 100
3/4 25C75FPMZ 100
1 25C100FPMZ 100
1-1/4 25C125FPMZ 100
1-1/2 25C150FPMZ 100
2 25C200FPMZ 100
45
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STAINLESS STEEL MACHINE SCREWS
18-8 is 300 series stainless steel having approximately
(not exactly) 18% chromium and 8% nickel. The term
18-8 is used interchangeably to characterize fasteners
made of 302, 302HQ, 303, 304, 305, 384, XM7, and other
variables of these grades with close chemical compositions.
Products listed are conveniently packaged. If you need bulk
shipments or special packaging configurations, call your
NEFCO representative.
18-8 Stainless Steel Machine Screws
Length Flat Slotted Flat Phillips Pan Slotted Pan Phillips Round Slotted Round Phillips Qty.
4 - 40 Nominal Size and Threads
1/4 — 4C25FPMS 4C25PSMS 4C25PPMS 4C25RSMS — 100
5/16 — 4C31FPMS 4C31PSMS 4C31PPMS 4C31RSMS — 100
3/8 — 4C37FPMS 4C37PSMS 4C37PPMS 4C37RSMS — 100
1/2 — 4C50FPMS 4C50PSMS 4C50PPMS 4C50RSMS — 100
5/8 — 4C62FPMS 4C62PSMS 4C62PPMS 4C62RSMS — 100
3/4 4C75FSMS 4C75FPMS 4C75PSMS 4C75PPMS 4C75RSMS — 100
7/8 — — 4C87PSMS 4C87PPMS 4C87RSMS — 100
1 — 4C100FPMS 4C100PSMS 4C100PPMS 4C100RSMS — 100
1-1/4 — 4C125FPMS 4C125PSMS 4C125PPMS 4C125RSMS — 100
1-1/2 — 4C150FPMS 4C150PSMS 4C150PPMS 4C150RSMS — 100
1-3/4 — — 4C175PSMS — — — 100
2 — — 4C200PSMS — 4C200RSMS — 100
6 - 32 Nominal Size and Threads
1/4 6C25FSMS 6C25FPMS 6C25PSMS 6C25PPMS 6C25RSMS — 100
5/16 6C31FSMS 6C31FPMS 6C31PSMS 6C31PPMS 6C31RSMS — 100
3/8 6C37FSMS 6C37FPMS 6C37PSMS 6C37PPMS 6C37RSMS — 100
1/2 6C50FSMS 6C50FPMS 6C50PSMS 6C50PPMS 6C50RSMS 6C50RPMS 100
5/8 6C62FSMS 6C62FPMS 6C62PSMS 6C62PPMS 6C62RSMS — 100
3/4 6C75FSMS 6C75FPMS 6C75PSMS 6C75PPMS 6C75RSMS — 100
7/8 6C87FSMS 6C87FPMS 6C87PSMS 6C87PPMS 6C87RSMS — 100
1 6C100FSMS 6C100FPMS 6C100PSMS 6C100PPMS 6C100RSMS 6C100RPMS 100
1-1/4 6C125FSMS 6C125FPMS 6C125PSMS 6C125PPMS 6C125RSMS — 100
1-1/2 6C150FSMS 6C150FPMS 6C150PSMS 6C150PPMS 6C150RSMS — 100
1-3/4 6C175FSMS — 6C175PSMS 6C175PPMS 6C17RSMS — 100
2-1/4 6C200FSMS — 6C200PSMS — 6C200RSMS 6C200RPMS 100
2-1/2 6C250FSMS — — — — — 100
3 6C300FSMS — — — 6C300RSMS — 100
8 - 32 Nominal Size and Threads
5/16 8C31FSMS 8C31FPMS 8C31PSMS 8C31PPMS 8C31RSMS — 100
3/8 8C37FSMS 8C37FPMS 8C37PSMS 8C37PPMS 8C37RSMS — 100
1/2 8C50FSMS 8C50FPMS 8C50PSMS 8C50PPMS 8C50RSMS 8C50RPMS 100
5/8 8C62FSMS 8C62FPMS 8C62PSMS 8C62PPMS 8C62RSMS — 100
3/4 8C75FSMS 8C75FPMS 8C75PSMS 8C75PPMS 8C75RSMS 8C75RPMS 100
7/8 8C87FSMS 8C87FPMS 8C87PSMS 8C87PPMS 8C87RSMS — 100
1 8C100FSMS 8C100FPMS 8C100PSMS 8C100PPMS 8C100RSMS 8C100RPMS 100
1-1/4 8C125FSMS 8C125FPMS 8C125PSMS 8C125PPMS 8C125RSMS — 100
1-1/2 8C150FSMS 8C150FPMS 8C150PSMS 8C150PPMS 8C150RSMS 8C150RPMS 100
1-3/4 8C175FSMS — 8C175PSMS 8C175PPMS 8C175RSMS — 100
2 8C200FSMS 8C200FPMS 8C200PSMS 8C200PPMS 8C200RSMS — 100
2-1/2 8C250FSMS — — — 8C250RSMS — 100
3 8C300FSMS — — — 8C300RSMS — 100
10 - 24 Nominal Size and Threads
3/8 10C37FSMS 10C37FPMS 10C37PSMS 10C37PPMS 10C37RSMS — 100
1/2 10C50FSMS 10C50FPMS 10C50PSMS 10C50PPMS 10C50RSMS 10C50RPMS 100
5/8 10C62FSMS 10C62FPMS 10C62PSMS 10C62PPMS 10C62RSMS — 100
3/4 10C75FSMS 10C75FPMS 10C75PSMS 10C75PPMS 10C75RSMS 10C75RPMS 100
46 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STAINLESS STEEL MACHINE SCREWS
18-8 Stainless Steel Machine Screws - Continued
Length Flat Slotted Flat Phillips Pan Slotted Pan Phillips Round Slotted Round Phillips Qty.
10 - 24 Nominal Size and Threads
7/8 10C87FSMS — 10C87PSMS 10C87PPMS 10C87RSMS — 100
1 10C100FSMS 10C100FPMS 10C100PSMS 10C100PPMS 10C100RSMS 10C100RPMS 100
1-1/4 10C125FSMS 10C125FPMS 10C125PSMS 10C125PPMS 10C125RSMS — 100
1-1/2 10C150FSMS 10C150FPMS 10C150PSMS 10C150PPMS 10C150RSMS 10C150RPMS 100
1-3/4 10C175FSMS — 10C175PSMS — 10C175RSMS — 100
2 10C200FSMS 10C200FPMS 10C200PSMS 10C200PPMS 10C200RSMS 10C200RPMS 100
2-1/2 10C250FSMS — 10C250PSMS — 10C250RSMS* — 100
3 10C300FSMS — 10C300PSMS — 10C300RSMS* — 100
10 - 32 Nominal Size and Threads
3/8 10F37FSMS 10F37FPMS 10F37PSMS 10F37PPMS 10F37RSMS — 100
1/2 10F50FSMS 10F50FPMS 10F50PSMS 10F50PPMS 10F50RSMS — 100
5/8 10F62FSMS 10F62FPMS 10F62PSMS 10F62PPMS 10F62RSMS — 100
3/4 10F75FSMS 10F75FPMS 10F75PSMS 10F75PPMS 10F75RSMS — 100
7/8 — 10F87FPMS 10F87PSMS 10F87PPMS 10F87RSMS — 100
1 10F100FSMS 10F100FPMS 10F100PSMS 10F100PPMS 10F100RSMS — 100
1-1/4 10F125FSMS 10F125FPMS 10F125PSMS 10F125PPMS 10F125RSMS — 100
1-1/2 10F150FSMS 10F150FPMS 10F150PSMS 10F150PPMS 10F100RSMS — 100
2 10F200FSMS 10F200FPMS 10F200PSMS 10F200PPMS 10F200RSMS — 100
2-1/2 — — 10F250PSMS — — — 100
3 — — 10F300PSMS — 10F300RSMS — 100
1/4 - 20 Nominal Size and Threads
3/8 25C37FSMS — — — — — 100
1/2 25C50FSMS 25C50FPMS 25C50PSMS 25C50PPMS 25C50RSMS — 100
5/8 25C62FSMS 25C62FPMS 25C62PSMS 25C62PPMS 25C62RSMS — 100
3/4 25C75FSMS 25C75FPMS 25C75PSMS 25C75PPMS 25C75RSMS — 100
7/8 25C87FSMS — 25C87PSMS 25C87PPMS 25C87RSMS — 100
1 25C100FSMS 25C100FPMS 25C100PSMS 25C100PPMS 25C100RSMS — 100
1-1/4 25C125FSMS 25C125FPMS 25C125PSMS 25C125PPMS 25C125RSMS — 100
1-1/2 25C150FSMS 25C150FPMS 25C150PSMS 25C150PPMS 25C150RSMS — 100
1-3/4 25C175FSMS — 25C175PSMS 25C175PPMS 25C175RSMS — 100
2 25C200FSMS 25C200FPMS 25C200PSMS 25C200PPMS 25C200RSMS — 100
2-1/2 25C250FSMS — 25C250PSMS — 25C250RSMS — 100
3 25C300FSMS — 25C300PSMS — 25C300RSMS — 100
5/16 - 18 Nominal Size and Threads
1/2 — — 31C50PSMS — — — 100
3/4 31C75FSMS — 31C75PSMS — 31C75RSMS — 100
1 31C100FSMS — 31C100PSMS — 31C100RSMS — 100
1-1/4 31C125FSMS — 31C125PSMS — 31C125RSMS — 100
1-1/2 31C150FSMS — 31C150PSMS — 31C150RSMS — 100
1-3/4 31C175FSMS — — — 31C175RSMS — 100
2 31C200FSMS — 31C200PSMS — 31C200RSMS — 100
2-1/2 31C250FSMS — — — 31C250RSMS — 100
3 31C300FSMS — — — 31C300RSMS — 100
3/8 - 16 Nominal Size and Threads
3/4 37C75FSMS — — — 37C75RSMS — 100
1 37C100FSMS — — — 37C100RSMS — 100
1-1/4 37C125FSMS — — — 37C125RSMS — 100
1-1/2 37C150FSMS — — — — — 100
1-3/4 37C175FSMS — — — — — 100
2 37C200FSMS — — — 37C200RSMS — 50
2-1/2 37C250FSMS — — — 37C250RSMS — 50
3 37C300FSMS — — — 37C300RSMS — 50
47
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SHEET METAL SCREWS
Pan Phillips / Slot Combo Type A Sheet Metal Screws
• Zinc Plated Steel
Length Part No. Qty.
#4
1/4 4N25PCSZ 100
1/2 4N50PCSZ 100
3/4 4N75PCSZ 100
1 4N100PCSZ 100
#6
3/8 6N37PCSZ 100
1/2 6N50PCSZ 100
5/8 6N62PCSZ 100
3/4 6N75PCSZ 100
1 6N100PCSZ 100
1-1/4 6N125PCSZ 100
1-1/2 6N150PCSZ 100
#7
3/8 7N37PCSZ 100
1/2 7N50PCSZ 100
5/8 7N62PCSZ 100
3/4 7N75PCSZ 100
1 7N100PCSZ 100
Length Part No. Qty.
#8
3/8 8N37PCSZ 100
1/2 8N50PCSZ 100
5/8 8N62PCSZ 100
3/4 8N75PCSZ 100
1 8N100PCSZ 100
1-1/4 8N125PCSZ 100
1-1/2 8N150PCSZ 100
1-3/4 8N175PCSZ 100
2 8N200PCSZ 100
#10
3/8 10N37PCSZ 100
1/2 10N50PCSZ 100
5/8 10N62PCSZ 100
3/4 10N75PCSZ 100
1 10N100PCSZ 100
1-1/4 10N125PCSZ 100
1-1/2 10N150PCSZ 100
1-3/4 10N175PCSZ 100
2 10N200PCSZ 100
2-1/2 10N250PCSZ 100
3 10N300PCSZ 100
Length Part No. Qty.
#12
3/4 12N75PCSZ 100
1 12N100PCSZ 100
1-1/4 12N125PCSZ 100
1-1/2 12N150PCSZ 100
1-3/4 12N175PCSZ 100
2 12N200PCSZ 100
2-1/2 12N250PCSZ 100
3 12N300PCSZ 100
#14
3/4 14N75PCSZ 100
1 14N100PCSZ 100
1-1/4 14N125PCSZ 100
1-1/2 14N150PCSZ 100
1-3/4 14N175PCSZ 100
2 14N200PCSZ 100
2-1/2 14N250PCSZ 100
3 14N300PCSZ 100
Pan Phillips Sheet Metal Screws
• Zinc Plated Steel
Length Part No. Qty.
#4
1/4 4N25PPSZ 100
3/8 4N37PPSZ 100
1/2 4N50PPSZ 100
5/8 4N62PPSZ 100
3/4 4N75PPSZ 100
1 4N100PPSZ 100
#6
1/4 6N25PPSZ 100
3/8 6N37PPSZ 100
1/2 6N50PPSZ 100
5/8 6N52PPSZ 100
3/4 6N75PPSZ 100
7/8 6N87PPSZ 100
1 6N100PPSZ 100
1-1/4 6N125PPSZ 100
1-1/2 6N150PPSZ 100
1-3/4 6N175PPSZ 100
2 6N200PPSZ 100
#7
3/8 7N37PPSZ 100
1/2 7N50PPSZ 100
5/8 7N62PPSZ 100
3/4 7N75PPSZ 100
1 7N100PPSZ 100
1-1/4 7N125PPSZ 100
1-1/2 7N150PPSZ 100
Length Part No. Qty.
#8
1/4 8N25PPSZ 100
3/8 8N37PPSZ 100
1/2 8N50PPSZ 100
5/8 8N62PPSZ 100
3/4 8N75PPSZ 100
7/8 8N87PPSZ 100
1 8N100PPSZ 100
1-1/4 8N125PPSZ 100
1-1/2 8N150PPSZ 100
1-3/4 8N275PPSZ 100
2 8N200PPSZ 100
2-1/2 8N250PPSZ 100
3 8N300PPSZ 100
#10
3/8 10N37PPSZ 100
1/2 10N50PPSZ 100
5/8 10N62PPSZ 100
3/4 10N75PPSZ 100
7/8 10N87PPSZ 100
1 10N100PPSZ 100
1-1/4 10N125PPSZ 100
1-1/2 10N150PPSZ 100
1-3/4 10N175PPSZ 100
2 10N200PPSZ 100
2-1/2 10N250PPSZ 100
3 10N300PPSZ 100
Length Part No. Qty.
#12
1/2 12N50PPSZ 100
5/8 12N62PPSZ 100
3/4 12N75PPSZ 100
7/8 12N87PPSZ 100
1 12N100PPSZ 100
1-1/4 12N125PPSZ 100
1-1/2 12N150PPSZ 100
1-3/4 12N175PPSZ 100
200 12N200PPSZ 100
2-1/2 12N250PPSZ 100
3 12N300PPSZ 100
#14
1/2 14N50PPSZ 100
5/8 14N62PPSZ 100
3/4 14N75PPSZ 100
7/8 14N87PPSZ 100
1 14N100PPSZ 100
1-1/4 14N175PPSZ 100
1-1/2 14N150PPSZ 100
1-3/4 14N175PPSZ 100
2 14N200PPSZ 100
2-1/2 14N250PPSZ 100
3 14N300PPSZ 100
48 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SHEET METAL SCREWS / HEX
Flat Phillips
Sheet Metal
Screws
• Zinc Plated Steel
Length Part No. Qty.
#6
1/4 6N25FPSZ 100
3/8 6N37FPSZ 100
1/2 6N50FPSZ 100
5/8 6N62FPSZ 100
3/4 6N75FPSZ 100
1 6N100FPSZ 100
1-1/4 6N125FPSZ 100
1-1/2 6N150FPSZ 100
1-3/4 6N175FPSZ 100
2 6N200FPSZ 100
#8
3/8 8N37FPSZ 100
1/2 8N50FPSZ 100
5/8 8N62FPSZ 100
3/4 8N75FPSZ 100
1 8N100FPSZ 100
1-1/4 8N125FPSZ 100
1-1/2 8N150FPSZ 100
1-3/4 8N175FPSZ 100
2 8N200FPSZ 100
2-1/2 8N250FPSZ 100
3 8N300FPSZ 100
#10
3/8 10N37FPSZ 100
1/2 10N50FPSZ 100
5/8 10N62FPSZ 100
3/4 10N75FPSZ 100
1 10N100FPSZ 100
1-1/4 10N125FPSZ 100
1-1/2 10N150FPSZ 100
1-3/4 10N175FPSZ 100
2 10N200FPSZ 100
2-1/2 10N250FPSZ 100
3 10N300FPSZ 100
#12
1/2 12N50FPSZ 100
5/8 12N62FPSZ 100
3/4 12N75FPSZ 100
1 12N100FPSZ 100
1-1/4 12N125FPSZ 100
1-1/2 12N250FPSZ 100
1-3/4 12N175FPSZ 100
2 12N200FPSZ 100
2-1/2 12N250FPSZ 100
3 12N300FPSZ 100
#14
3/4 14N75FPSZ 100
1 14N100FPSZ 100
1-1/4 14N125FPSZ 100
1-1/2 14N150FPSZ 100
1-3/4 14N175FPSZ 100
2 14N200FPSZ 100
2-1/2 14N250FPSZ 100
3 14N300FPSZ 100
Slotted Hex
Washer Sheet
Metal Screws
• Zinc Plated Steel
Length Part No. Qty.
#6
3/8 6N37HWSZ 100
1/2 6N50HWSZ 100
5/8 6N62HWSZ 100
3/4 6N75HWSZ 100
1 6N100HWSZ 100
#8
3/8 8N37HWSZ 100
1/2 8N50HWSZ 100
5/8 8N62HWSZ 100
3/4 8N75HWSZ 100
1 8N100HWSZ 100
1-1/4 8N125HWSZ 100
1-1/2 8N150HWSZ 100
2 8N200HWSZ 100
#10
3/8 10N37HWSZ 100
1/2 10N50HWSZ 100
5/8 10N62HWSZ 100
3/4 10N75HWSZ 100
1 10N100HWSZ 100
1-1/4 10N125HWSZ 100
1-1/2 10N150HWSZ 100
2 10N200HWSZ 100
Length Part No. Qty.
#10
2-1/2 10N250HWSZ 100
3 10N300HWSZ 100
#12
1/2 12N50HWSZ 100
5/8 12N62HWSZ 100
3/4 12N75HWSZ 100
1 12N100HWSZ 100
1-1/4 12N125HWSZ 100
1-1/2 12N150HWSZ 100
2 12N200HWSZ 100
2-1/2 12N250HWSZ 100
3 12N300HWSZ 100
#14
1/2 14N50HWSZ 100
3/4 14N75HWSZ 100
1 14N100HWSZ 100
1-1/4 14N125HWSZ 100
1-1/2 14N150HWSZ 100
1-3/4 14N175HWSZ 100
2 14N200HWSZ 100
2-1/2 14N250HWSZ 100
3 14N300HWSZ 100
Plastic Anchors Kits
• Light duty, multi-size anchor for use
in concrete, block, tile and brick
• Moisture and chemical resistant, for
indoor/outdoor use
• Use with sheet metal, wood and lag
screws.
• Has collar for hollow materials
• Made in U.S.A
Kit No. Anchor Size Screw Size
6K PAK No. 6-8 6 x 1
8K PAK No. 8-10 8 x 1
10K PAK No. 10-12 10 x 1-1/2
14K PAK No. 14-16 14 x 2
49
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STAINLESS STEEL SHEET METAL SCREWS
Stainless Steel Sheet Metal Screws
Length Flat Slotted Oval Slotted Pan Slotted Flat Phillips Oval Phillips Pan Phillips Qty.
#4
1/4 — — 4N25PSSS — — 4N25PPSS 100
4 x 3/8 4N37FSSS 4N37OSSS 4N37PSSS 4N37FPSS 4N37OPSS 4N37PPSS 100
4 x 1/2 4N50FSSS 4N50OSSS 4N50PSSS 4N50FPSS 4N50OPSS 4N50PPSS 100
5/8 — — 4N62PSSS 4N62FPSS 4N62OPSS 4N62PPSS 100
4 x 3/4 4N75FSSS 4N75OSSS 4N75PSSS 4N75FPSS — 4N75PPSS 100
1 — — — — 4N100OPSS — 100
6 — — — — — —
1/4 — — 6N25PSSS — — 4N25PPSS 100
6 x 3/8 6N37FSSS 6N37OSSS 6N37PSSS 6N37FPSS — 6N37PPSS 100
6 x 1/2 6N50FSSS 6N50OSSS 6N50PSSS 6N50FPSS 6N50OPSS 6N50PPSS 100
6 x 5/8 6N62FSSS 6N62OSSS 6N62PSSS 6N62FPSS — 6N62PPSS 100
6 x 3/4 6N75FSSS 6N75OSSS 6N75PSSS 6N75FPSS 6N75OPSS 6N75PPSS 100
6 x 1 6N100FSSS 6N100OSSS 6N100PSSS 6N100FPSS 6N100OPSS 6N100PPSS 100
6 x 1-1/4 6N125FSSS 6N125OSSS 6N125PSSS 6N125FPSS 6N125OPSS 6N125PPSS 100
6 x 1-1/2 6N150FSSS 6N150OSSS 6N150PSSS 6N150FPSS 6N150OPSS 6N150PPSS 100
2 — — 6N200PSSS — — — 100
#8
1/4 — — 8N25PSSS — — — 100
3/8 8N37FSS — 8N37PSSS — — 8N37PPSS 100
1/2 8N50FSSS 8N50OSSS 8N50PSSS 8N50FPSS 8N50OPSS 8N50PPSS 100
5/8 8N62FSSS 8N62OSSS 8N62PSSS 8N62FPSS — 8N62PPSS 100
3/4 8N75FSSS 8N75OSSS 8N75PSSS — 8N75OPSS 8N75PPSS 100
1 8N100FSSS 8N100OSSS 8N100PSSS 8N100FPSS 8N100OPSS 8N100PPSS 100
1-1/4 8N125FSSS 8N125OSSS 8N125PSSS 8N125FPSS 8N125OPSS 8N125PPSS 100
1-1/2 8N150FSSS 8N150OSSS 8N150PSSS 8N150FPSS 8N150OPSS 8N150PPSS 100
1-3/4 — — 8N175PSSS 8N175FPSS 8N175OPSS — 100
2 8N200FSSS 8N200OSSS 8N200PSSS 8N200FPSS 8N200OPSS 8N200PPSS 100
2-1/2 — — — — 8N250OPSS — 100
3 — — — — 8N300OPSS — 100
#10
3/8 — — 10N37PSSS — — 10N37PPSS 100
1/2 10N50FSSS 10N50OSSS 10N50PSSS 10N50FPSS 10N50OPSS 10N50PPSS 100
5/8 10N62FSSS 10N62OSSS 10N62PSSS 10N62FPSS — 10N62PPSS 100
3/4 10N75FSSS 10N75OSSS 10N75PSSS 10N75FPSS 10N75OPSS 10N75PPSS 100
1 10N100FSSS 10N100OSSS 10N100PSSS 10N100FPSS 10N100OPSS 10N100PPSS 100
1-1/4 10N125FSSS 10N125OSSS 10N125PSSS 10N125FPSS 10N125OPSS 10N125PPSS 100
1-1/2 10N150FSSS 10N150OSSS 10N150PSSS 10N150FPSS 10N150OPSS 10N150PPSS 100
1-3/4 10N175FSSS 10N175OSSS 10N175PSSS — 10N175OPSS — 100
2 10N200FSSS 10N200OSSS 10N200PSSS 10N200FPSS 10N200OPSS 10N200PPSS 100
2-1/2 — — — — 10N250OPSS 10N250PPSS 100
3 — — — — 10N300OPSS 10N300PPSS 100
#12
1/2 — — 12N50PSSS — — 12N50PPSS 100
5/8 — — 12N62PSSS — — — 100
3/4 12N75FSSS 12N75OSSS 12N75PSSS 12N75FPSS 12N75OPSS 12N75PPSS 100
1-1/4 12N125FSSS 12N125OSSS 12N125PSSS 12N125FPSS 12N125OPSS 12N125PPSS 100
1-1/2 12N150FSSS 12N150OSSS 12N150PSSS 12N150FPSS 12N150OPSS 12N150PPSS 100
2 12N200FSSS 12N200OSSS 12N200PSSS 12N200FPSS 12N200OPSS 12N200PPSS 100
2-1/2 — — — — 12N250OPSS — 100
3 — — — — 12N300OPSS — 100
#14
1/2 — — 14N50PSSS — — 14N50PPSS 100
5/8 — — 14N62PSSS — — — 100
3/4 14N75FSSS 14N75OSSS 14N75PSSS 14N75FPSS — 14N75PPSS 100
1 14N100FSSS 14N100SSS 14N100PSSS 14N75FPSS 14N100OPSS 14N100PPSS 100
1-1/4 14N125FSSS 14N125OSSS 14N125PSSS 14N125FPSS 14N125OPSS 14N125PPSS 100
1-1/2 14N150FSSS 14N150OSSS 14N150PSSS 14N150FPSS 14N150OPSS 14N150PPSS* 100
2 14N200FSSS 14N200OSSS 14N200PSSS 14N200FPSS 14N200OPSS* 14N200PPSS* 100
2-1/2 14N200FSSS — 14N250PSSS — 14N250OPSS — 100
3 — — — — 14N300OPSS — 100
50 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SECURITY/TAMPER PROOF SCREWS
Security Screws
NEFCO can meet your security screw needs with a variety of drive styles and head configurations
Choose Drive Style
Choose Head Configuration
Choose Thread Configuration
Tamper-resistant screws comply to the same thread size and length as
standard screws and use the same nomenclature.
What About Size?
Security screws follow the same sizing rules as machine screws and sheet
metal screws. Substituting sheet metal screws for wood applications is recommended.
Need Tools?
All security screws require specific tools to install and remove. Only the One Way
configuration allows you to get away with a standard flat screwdriver for installation. Tools are
available as 1/4 drive bit tips, angle hex keys and trouble shooter kits.
• ® Snake Eyes is a registered trademark to Tamperproof Screw Co. Inc.
• ® Torx is a registered trademark of Camcar Division of Textron Inc.
• ® Tri-Wing is a registered trademark of Phillips Screw Co.
Torx® SecurityTri-Wings®
Socket Pin-HeadOne-Ways
Phillips Pin-Head
Snake Eyes®
Spanners
Button head
Round Head
Oval Head
Flat Head
Trus Head
Pan Head
Machine ScrewSheet Metal Screw
12V Li-Ion 3/8" Drill Driver
• 2-Speed, all-metal gear box.
• Powerful motor, up to 25% more torque.
• Ratcheting single metal sleeve chuck for
better bit retention.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
Part No. Description
2410-22 12V Cordless Li-Ion
3/8" Drill Driver Kit
2410-22
2401-22
12V Li-Ion Screwdriver
• Quick Bit-Loading 1/4 in. Hex Chuck for
one-handed operation
• Metal Gear Housing for job site durability
• Variable Speed Trigger for output power
control
• Over-mold side and grip
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger, #2
Phillips ¼" Hex Insert Bit, & Storage Bag.
Part No. Description
2401-22 12V Cordless Li-Ion Screwdriver
12V Li-Ion Battery Charger
For Use with Milwaukee M12™ Tools and
Accessories. 30 minute charger.
Part No. Description
48-59-2401 M12 12V 30-min Charger
12V Li-Ion
Battery
For use with Milwaukee
M12™ Tools & Accessories.
Part No.
48-11-2401
12V Screwdrivers & Drill Drivers - Get the Job Done!
51
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ROOFING FASTENERS / SCREWS
3" Roof Deck Plate
Part No. Size
300DSRPH 3”
Roofgrip Steel Deck Screws
Length Part No. Qty.
#12
1-5/8 12N162RDS 1,000
2-1/4 12N225RDS 1,000
2-7/8 12N287RDS 1,000
3-1/4 12N325RDS 1,000
3-3/4 12N375RDS 1,000
4-3/8 12N437RDS 1,000
5 12N500RDS 1,000
6 12N600RDS 1,000
7 12N700RDS 1,000
8 12N800RDS 1,000
#14
1-1/4 14N125RDS 1,000
1-3/4 14N175RDS 1,000
2 14N200RDS 1,000
3 14N300RDS 1,000
4 14N400RDS 1,000
5 14N500RDS 1,000
6 14N600RDS 1,000
7 14N700RDS 1,000
8 14N800RDS 1,000
9 14N900RDS 500
10 14N1000RDS 500
11 14N1100RDS 500
12 14N1200RDS 500
14 14N1400RDS 500
Zamac Nailins
Size Steel Stainless Steel
1/4 x 3/4 25D75RHD 25D75RHD/WSN
1/4 x 1 25D100RHD 25D100RHD/WSN
1/4 x 1-1/4 25D125RHD 25D125RHD/WSN
1/4 x 1-1/2 25D150RHD 25D150RHD/WSN
1/4 x 2 25D200RHD 25D200RHD/WSN
Thumb Screws
• Zinc Plated
Length Part No. Qty.
6 - 32 Nominal Size and Threads
1/2 6C5THSZ 100
8 - 32 Nominal Size and Threads
3/8 8C37THSZ 100
1/2 8C50THSZ 100
3/4 8C75THSZ 100
1 8C100THSZ 100
10 - 24 Nominal Size and Threads
3/8 10C37THSZ 100
1/2 10C50THSZ 100
3/4 10C75THSZ 100
1 10C100THSZ 100
1-1/2 10C150THSZ 100
10 - 32 Nominal Size and Threads
3/8 10F37THSZ 100
1/2 10F50THSZ 100
3/4 10F75THSZ 100
1 10F100THSZ 100
1-1/2 10F150THSZ 100
2 10F200THSZ 100
1/4 - 20 Nominal Size and Threads
1/2 25C50THSZ 100
3/4 25C75THSZ 100
1 25C100THSZ 100
1-1/4 25C125THSZ 100
1-1/2 25C150THSZ 100
2 25C200THSZ 100
2-1/2 25C250THSZ 100
5 /16 - 8 Nominal Size and Threads
3/4 31C75THSZ 100
1 31C100THSZ 100
1-1/4 31C125THSZ 100
1-1/2 31C150THSZ 100
2 31C200THSZ 100
3/8 - 16 Nominal Size and Threads
3/4 37C75THSZ 100
1 37C100THSZ 100
1-1/4 37C125THSZ 100
1-1/2 37C150THSZ 100
2 37C200THSZ 100
Hanger Bolts
• Uniform Diameter
• Machine screw thread/lag thread
• Also available in zinc plated
Size Part No. Qty.
10 - 24 Nominal Size and Threads
1-1/2 10C150HAB 100
2 10C200HAB 100
2-1/2 10C250HAB 100
3 10C300HAB 100
1/4 - 20 Nominal Size and Threads
1-1/2 25C150HAB 100
1-3/4 25C175HAB 100
2 25C200HAB 100
2-1/2 25C250HAB 100
3 25C300HAB 100
3-1/2 25C350HAB 100
4 25C400HAB 100
5/16 - 18 Nominal Size and Threads
1-1/2 31C150HAB 100
1-3/2 31C175HAB 100
2 31C200HAB 100
2-1/2 31C250HAB 100
3 31C300HAB 100
3-1/2 31C350HAB 100
4 31C400HAB 50
4-1/2 31C450HAB 50
3/8 - 16 Nominal Size and Threads
2 37C200HAB 100
2-1/2 37C250HAB 100
3 37C300HAB 100
3-1/2 37C350HAB 100
4 37C400HAB 100
4-1/2 37C450HAB 100
Green Ground
Screws
Size Part No. Qty.
10-32 x 3/8 10F37HCMZG 100
18-8 Stainless Steel Hex Head Lag Screws
• Used in conjunction with standard lag shields in concrete
or directly in wood timber
Size Part No. Qty.
1/4 Diameter
1 25C100LABS 25
1-1/2 25C150LABS 25
2 25C200LABS 25
2-1/2 25C250LABS 25
3 25C300LABS 25
3-1/2 25C350LABS 10
4 25C400LABS 25
5 25C500LABS 25
Size Part No. Qty.
5/16 Diameter
1-1/2 31C150LABS 25
2 31C200LABS 25
2-1/2 31C250LABS 25
Size Part No. Qty.
5/16 Diameter
3 31C300LABS 25
4 31C400LABS 10
5 31C500LABS 10
52 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PLOW BOLTS / WATERWORKS BOLTS
Primary use is for attaching scraper and plow blades
• Available in flat and dome head configurations
• Minimum tensile 120,000 PSI
Plow Bolts - Plain Alloy Steel
Grade 5
Size Part No. Qty.
3/8 - 16 Nominal Size and Threads
1 37C100PLB5 100
1-1/4 37C125PLB5 100
1-1/2 37C150PLB5 100
1-3/4 37C175PLB5 100
2 37C200PLB5 100
2-1/2 37C250PLB5 50
3 37C300PLB5 50
7/16 - 14 Nominal Size and Threads
1-1/4 43C125PLB5 50
1-1/2 43C150PLB5 50
1-3/4 43C175PLB5 50
2 43C200PLB5 50
2-1/4 43C225PLB5 50
2-1/2 43C255PLB5 50
3 43C300PLB5 50
1/2 - 13 Nominal Size and Threads
1-1/4 50C125PLB5 50
1-1/2 50C150PLB5 50
1-3/4 50C175PLB5 50
2 50C200PLB5 50
2-1/4 50C225PLB5 50
2-1/2 50C250PLB5 50
3 50C300PLB5 50
3-1/2 50C350PLB5 25
5/8 - 11 Nominal Size and Threads
2 62C200PLB5 25
2-1/4 62C225PLB5 25
2-1/2 62C250PLB5 25
2-3/4 62C275PLB5 25
3 62C300PLB5 25
2 75C200PLB5 20
2-1/2 75C250PLB5 20
3 75C300PLB5 20
Corporation Eye Bolts
• Black Finish
HS Part No.
3/4 x 4 75C400TIB
3/4 x 4-1/2 75C450TIB
Duc Lug
• Ductile Iron
• For 4" - 12" pipe
• 50/box
Part No.
0UDUL/P
Socket Washer
• Steel, plain or electro-plated finish
• For use with B3134 four-bolt
underground clamp to secure rods.
Part Tie Rod For Use w/ (inches) Qty/
No. Size Pipe Size 'D' 'E' 'F' lb.
75DSCW 3/4"–10 4" – 8" 7/8 3 1/2 119
100DSCW 1"–9 10" – 12" 1-1/8 3-1/2 1/2 159
112DSCW 1-1/8"–7 14" – 16" 1-1/4 3-1/2 5/8 181
125DSCW 1-1/4"–7 18" 1-3/8 3-1/2 3/4 229
137DSCW 1-3/8"–6 20" 1-1/2 3-1/2 3/4 223
150DSCW 1-1/2"–6 24" 1-5/8 3-1/2 3/4 217
Corten T-Head Bolts With Nuts
• Steel, plain or electro-plated finish
L D TL W H NT F CQ
Bolt Bolt Bolt Thread Head Head Nut Across Container Wt./
Part No. Size Thread Length Dia. Length Width Height Thickness Flats Qty.Pc
62C250CTB 5/8 x 2-1/2 5/8 - 11 2.5 .625 1.25 1.50 .625 .625 1.062 400 45
62C300CTB 5/8 x 3 5/8 - 11 3.0 .625 1.25 1.50 .625 .625 1.062 375 49
62C350CTB 5/8 x 3-1/2 5/8 - 11 3.5 .625 1.25 1.50 .625 .625 1.062 375 53
75C300CTB 3/4 x 3 3/4 - 10 3.0 .750 1.75 1.75 .750 .750 1.250 250 79
75C350CTB 3/4 x 3-1/2 3/4 - 10 3.5 .750 1.75 1.75 .750 .750 1.250 225 84
75C400CTB 3/4 x 4 3/4 - 10 4.0 .750 1.75 1.75 .750 .750 1.250 200 89
75C450CTB 3/4 x 4-1/2 3/4 - 10 4.5 .750 1.75 1.75 .750 .750 1.250 175 94
100C600CTB 1 x 6 1 - 8 6.0 1.0 3.00 2.25 1.00 1.012 1.625 75 196
Value Added Services…
• Solving your application
problems
• Saving you time and
money
• Supplying the technical edge
• Standing for Quality
• Servicing the Sale
• Stocking the product
53
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BRASS HEX CAP SCREWS / NUTS
I use product faster than most people
can deliver it...
Do you have Inventory Management
Programs or Just-In-Time capabilities?
NEFCO Is small enough to take the time to develop a
system specifically designed for your project needs.
NEFCO Is large enough to be plugged in to the leading
edge technology that is necessary to make systems
work for you.
Call today and we will work with you to build a solution.
Brass Screws and Nuts
The most alloy of copper, brass is basically 2/3 copper
and 1/3 zinc. It is non-magnetic with good strength and
toughness. High electrical conductivity, and an attractive,
lustrous finish. It has good corrosion resistance, but not
in salt water. Brass is commonly used in the electrical and
communications industries, builders hardware and some
marine applications.
Brass Hex Cap Screws
Length Part No. Qty.
1/4 - 20 Nominal Size and Threads
1/2 25C50HCSB 100
5/8 25C62HCSB 100
3/4 25C75HCSB 100
7/8 25C87HCSB 100
1 25C100HCSB 100
1-1/4 25C125HCSB 100
1-1/2 25C150HCSB 100
1-3/4 25C175HCSB 100
2 25C200HCSB 100
2-1/4 25C225HCSB 100
2-1/2 25C250HCSB 100
3 25C300HCSB 100
3-1/2 25C350HCSB 100
5/16 - 18 Nominal Size and Threads
1/2 31C50HCSB 100
5/8 31C62HCSB 100
3/4 31C75HCSB 100
1 31C100HCSB 100
1-1/4 31C125HCSB 100
1-1/2 31C150HCSB 100
1-3/4 31C175HCSB 100
2 31C200HCSB 100
2-1/2 31C250HCSB 100
3 31C300HCSB 100
3/8 - 16 Nominal Size and Threads
1/2 37C50HCSB 100
3/4 37C75HCSB 100
7/8 37C87HCSB 100
1 37C100HCSB 100
1-1/4 37C125HCSB 100
1-1/2 37C150HCSB 100
1-3/4 37C175HCSB 100
2 37C200HCSB 100
2-1/4 37C225HCSB 100
2-1/2 37C250HCSB 50
3 37C300HCSB 50
3-1/2 37C350HCSB 50
1/2 - 13 Nominal Size and Threads
1 50C100HCSB 50
1-1/4 50C125HCSB 50
1-1/2 50C150HCSB 50
1-3/4 50C175HCSB 50
2 50C200HCSB 50
2-1/4 50C225HCSB 50
2-1/2 50C250HCSB 50
3 50C300HCSB 50
5/8 - 11 Nominal Size and Threads
1-1/2 62C150HCSB 25
2 62C200HCSB 25
2-1/2 62C250HCSB 25
3 62C300HCSB 25
Brass Finish Hex Nuts
Size Part No. Qty.
1/4 - 20 25CHFNB 100
1/4 - 28 25FHFNB 100
5/16 - 18 31CHFNB 100
5/16 - 24 31FHFNB 100
3/8 - 16 37CHFNB 100
3/8 - 24 37FHFNB 100
7/16 - 14 43CHFNB 50
7/16 - 20 43FHFNB 50
1/2 - 13 50CHFNB 25
1/2 - 20 50FHFNB 25
5/8 - 11 62CHFNB 25
5/8 - 18 62FHFNB 25
3/4 - 10 75CHFNB 20
3/4 - 16 75FHFNB 20
7/8 - 9 87CHFNB 15
7/8 - 14 87FHFNB 15
Brass Heavy Hex Nuts
Size Part No. Qty.
1/4 - 20 25CHHNB 100
5/16 - 18 31CHHNB 100
3/8 - 16 37CHHNB 100
7/16 - 14 43CHHNB 50
1/2 - 13 50CHHNB 50
5/8 - 11 62CHHNB 25
3/4 - 10 75CHHNB 20
7/8 - 9 87CHHNB 15
1 - 8 100CHHNB 10
54 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BRASS SCREWS / WASHERS
Not in the catalog?
Give us a call we
are constantly adding new
items to our inventory.
Brass Machine Screws
The most common alloy of copper, brass is basically 2/3
copper and 1/3 zinc. It is non-magnetic with good strength
and toughness. High electrical conductivity, and an attractive,
lustrous finish. It has good corrosion resistance, but not
in salt water. Brass is commonly used in the electrical and
communications industries, builders hardware and some
marine applications.
Length Flat Slotted Round Slotted Qty.
4 - 40 Nominal Size and Threads
3/16 4C18FSMB 4C18RSMB 100
1/4 4C25FSMB 4C25RSMB 100
5/16 4C31FSMB 4C31RSMB 100
3/8 4C37FSMB 4C37RSMB 100
1/2 4C50FSMB 4C50RSMB 100
5/8 4C62FSMB 4C62RSMB 100
3/4 4C75FSMB 4C75RSMB 100
1 4C100FSMB 4C100RSMB 100
1-1/4 4C125FSMB 4C125RSMB 100
6 - 32 Nominal Size and Threads
3/16 6C18FSMB 6C18RSMB 100
1/4 6C25FSMB 6C25RSMB 100
5/16 6C31FSMB 6C31RSMB 100
3/8 6C37FSMB 6C37RSMB 100
1/2 6C50FSMB 6C50RSMB 100
5/8 6C62FSMB 6C62RSMB 100
3/4 6C75FSMB 6C75RSMB 100
1 6C100FSMB 6C100RSMB 100
1-1/4 6C125FSMB 6C125RSMB 100
1-1/2 6C150FSMB 6C150RSMB 100
2 6C200FSMB 6C200RSMB 100
3 6C300FSMB 6C300RSMB 100
8 - 32 Nominal Size and Threads
3/16 8C18FSMB 8C18RSMB 100
1/4 8C25FSMB 8C25RSMB 100
5/16 8C31FSMB 8C31RSMB 100
3/8 8C37FSMB 8C37RSMB 100
1/2 8C50FSMB 8C50RSMB 100
5/8 8C62FSMB 8C62RSMB 100
3/4 8C75FSMB 8C75RSMB 100
7/8 8C87FSMB 8C87RSMB 100
1 8C100FSMB 8C100RSMB 100
1-1/4 8C125FSMB 8C125RSMB 100
1-1/2 8C150FSMB 8C150RSMB 100
1-3/4 8C175FSMB 8C175RSMB 100
2 8C200FSMB 8C200RSMB 100
Length Flat Slotted Round Slotted Qty.
10 - 24 Nominal Size and Threads
1/4 10C25FSMB 10C25RSMB 100
5/16 10C31FSMB 10C31RSMB 100
3/8 10C37FSMB 10C37RSMB 100
1/2 10C50FSMB 10C50RSMB 100
5/48 10C62FSMB 10C62RSMB 100
3/4 10C75FSMB 10C75RSMB 100
7/8 10C87FSMB 10C87RSMB 100
1 10C100FSMB 10C100RSMB 100
1-1/4 10C125FSMB 10C125RSMB 100
1-1/2 10C150FSMB 10C150RSMB 100
1-3/4 10C175FSMB 10C175RSMB 100
2 10C200FSMB 10C200RSMB 100
2-1/2 10C250FSMB 10C250RSMB 100
3 10C300FSMB 10C300RSMB 100
10 - 32 Nominal Size and Threads
1/4 10F25FSMB 10F25RSMB 100
5/16 10F31FSMB 10F31RSMB 100
3/8 10F37FSMB 10F37RSMB 100
1/2 10F50FSMB 10F50RSMB 100
5/8 10F62FSMB 10F62RSMB 100
3/4 10F75FSMB 10F75RSMB 100
7/8 10F87FSMB 10F87RSMB 100
1 10F100FSMB 10F100RSMB 100
1-1/4 10F125FSMB 10F125RSMB 100
1-1/2 10F150FSMB 10F150RSMB 100
1-3/4 10F175FSMB 10F175RSMB 100
2 10F200FSMB 10F200RSMB 100
2-1/2 10F250FSMB 10F250RSMB 100
3 10F300FSMB 10F300RSMB 100
12 - 24 Nominal Size and Threads
1/2 12C50FSMB 12C50RSMB 100
3/4 12C75FSMB 12C75RSMB 100
1 12C100FSMB 12C100RSMB 100
1-1/4 12C125FSMB 12C125RSMB 100
1-1/2 12C150FSMB 12C150RSMB 100
2 12C200FSMB 12C200RSMB 100
2-1/2 12C250FSMB 12C250RSMB 100
3 12C300FSMB 12C300RSMB 100
Brass Flat Washers
Size Part No. Qty.
1/4 25DFLWB 100
3/8 37DFLWB 100
1/2 50DFLWB 100
5/8 62DFLWB 100
3/4 75DFLWB 100
55
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Brass Machine
Screw Nuts
Size Part No. Qty.
2 - 56 2CMSNB 100
3 - 48 3CMSNB 100
4 - 40 4CMSNB 100
5 - 40 5CMSNB 100
6 - 32 6CMSNB 100
8 - 32 8CMSNB 100
10 - 24 10CMSNB 100
10 - 32 10FMSNB 100
12 - 24 12CMSNB 100
1/4 - 20 25CMSNB 100
1/4 - 28 25FMSNB 100
5/16 - 18 31CMSNB 100
3/8 - 16 37CMSNB 100
BRASS MACHINE SCREWS / NUTS
Brass Wing
Nuts
Size Part No. Qty.
4 4LOWJ 100
6 6LOWJ 100
8 8LOWJ 100
10 10LOWJ 100
1/4 25LOWJ 100
5/16 31LOWJ 100
3/8 37LOWJ 100
1/2 50LOWJ 100
5/8 62LOWJ 100
3/4 75LOWJ 100
Brass Slotted Machine Screws
Length Flat Slotted Round Slotted Qty.
1/4 - 20 Nominal Size and Threads
3/8 25C37FSMB 25C37RSMB 100
1/2 25C50FSMB 25C50RSMB 100
5/8 25C62FSMB 25C62RSMB 100
3/4 25C75FSMB 25C75RSMB 100
1 25C100FSMB 25C100RSMB 100
1-1/4 25C125FSMB 25C125RSMB 100
1-1/2 25C150FSMB 25C150RSMB 100
1-3/4 25C175FSMB 25C175RSMB 100
2 25C200FSMB 25C200RSMB 100
2-1/2 25C250FSMB 25C250RSMB 100
3 25C300FSMB 25C300RSMB 100
5/16 - 18 Nominal Size and Threads
1/2 31C50FSMB 31C50RSMB 100
5/8 31C62FSMB 31C62RSMB 100
3/4 31C75FSMB 31C75RSMB 100
1 31C100FSMB 31C100RSMB 100
1-1/4 31C125FSMB 31C125RSMB 100
1-1/2 31C150FSMB 31C150RSMB 100
1-3/4 31C175FSMB 31C175RSMB 100
2 31C200FSMB 31C200RSMB 100
2-1/2 31C250FSMB 31C250RSMB 100
3 31C300FSMB 31C300RSMB 100
Length Flat Slotted Round Slotted Qty.
3/8 - 16 Nominal Size and Threads
3/4 37C75FSMB 37C75RSMB 100
1 37C100FSMB 37C100RSMB 100
1-1/4 37C125FSMB 37C125RSMB 100
1-1/2 37C150FSMB 37C150RSMB 100
2 37C200FSMB 37C200RSMB 100
2-1/2 37C250FSMB 37C250RSMB 100
3 37C300FSMB 37C300RSMB 50
1/2 - 13 Nominal Size and Threads
1 50C100FSMB - 50
1-1/4 50C125FSMB - 50
1-1/2 50C150FSMB - 50
1-3/4 50C175FSMB - 50
2 50C200FSMB - 50
2-1/2 50C250FSMB - 50
3 50C300FSMB - 50
Silicon Bronze
Lock Washer
• For use with Brass Fasteners
Size Part No. Qty.
4 4LOWJ 100
6 6LOWJ 100
8 8LOWJ 100
10 10LOWJ 100
1/4 25LOWJ 100
5/16 31LOWJ 100
3/8 37LOWJ 100
1/2 50LOWJ 100
5/8 62LOWJ 100
3/4 75LOWJ 100
Brass Acorn Nuts
Size Part No. Qty.
6 - 32 6CCANB 100
8 - 32 8CCANB 100
10 - 24 10CCANB 100
10 - 32 10FCANB 100
1/4 - 20 25CCANB 100
3/8 - 16 37CCANB 100
Acorn Cap Nuts
• Nickel -2 piece
Size Part No. Qty.
6 - 32 6CCANB 100
8 - 32 8CCANB 100
10 - 24 10CCANB 100
10 - 32 10FCANB 100
1/4 - 20 25CCANB 100
3/8 - 16 37CCANB 100
Don’t see what you need?
Call us today!
Stop wrestling
with Fastener
problems...
Call us for
easy solutions.
Countersunk
Finish Washers -
Brass
Size Part No. Qty.
4 4NCFWB 100
6 6NCFWB 100
8 8NCFWB 100
10 10NCFWB 100
12 12NCFWB 100
14 14NCFWB 100
56 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BRASS WOOD SCREWS
Not in the Catalog?
Give us a call.
We are constantly adding new items to
our inventory.
Brass Wood Screws
Due to the soft nature of
brass screws pre-drilling and
lubricating is recommended.
Length Flat Phillips Slotted Round Slotted Flat Qty.
4" Diameter
4 x 3/8 4N37FPWB 4N37RWSB 4N37FWSB 100
4 x 1/2 4N50FPWB 4N50RWSB 4N50FWSB 100
4 x 5/8 4N62FPWB 4N62RWSB 4N62FWSB 100
4 x 3/4 4N75FPWB 4N75RWSB 4N75FWSB 100
4 x 1 4N100FPWB 4N100RWSB 4N100FWSB 100
6" Diameter
3/8 — 6N37RWSB 6N37FWSB 100
1/2 6N50FPWB 6N50RWSB 6N50FWSB 100
5/8 6N62FPWB 6N62RWSB 6N62FWSB 100
3/4 6N75FPWB 6N75RWSB 6N75FWSB 100
1 6N100FPWB 6N100RWSB 6N100FWSB 100
1-1/4 6N125FPWB 6N125RWSB 6N125FWSB 100
1-1/2 6N150FPWB 6N150RWSB 6N150FWSB 100
8" Diameter
1/2 8N50FPWB 8N50RWSB 8N50FWSB 100
5/8 8N62FPWB 8N62RWSB 8N62FWSB 100
3/4 8N75FPWB 8N75RWSB 8N75FWSB 100
7/8 8N87FPWB 8N87RWSB 8N87FWSB 100
1 8N100FPWB 8N100RWSB 8N100FWSB 100
1-1/4 8N125FPWB 8N125RWSB 8N125FWSB 100
1-1/2 8N150FPWB 8N150RWSB 8N150FWSB 100
1-3/4 8N175FPWB 8N175RWSB 8N175FWSB 100
2 8N200FPWB 8N200RWSB 8N200FWSB 100
10" Diameter
3/4 10N75FPWB 10N75RWSB 10N75FWSB 100
1 10N100FPWB 10N100RWSB 10N100FWSB 100
1-1/4 10N125FPWB 10N125RWSB 10N125FWSB 100
1-1/2 10N150FPWB 10N150RWSB 10N150FWSB 100
1-3/4 10N175FPWB 10N175RWSB 10N175FWSB 100
2 10N200FPWB 10N200RWSB 10N200FWSB 100
2-1/2 10N250FPWB 10N250RWSB 10N250FWSB 100
3 10N300FPWB 10N300RWSB 10N300FWSB 100
12" Diameter
1 12N100FPWB 12N100RWSB 12N100FWSB 100
1-1/4 12N125FPWB 12N125RWSB 12N125FWSB 100
1-1/2 12N150FPWB 12N150RWSB 12N150FWSB 100
1-3/4 12N175FPWB 12N175RWSB 12N175FWSB 100
2 12N200FPWB 12N200RWSB 12N200FWSB 100
2-1/2 12N250FPWB 12N250RWSB 12N250FWSB 100
3 12N300FPWB 12N300RWSB 12N300FWSB 100
14" Diameter
1 — 14N100RWSB 14N100FWSB 100
1-1/4 14N125FPWB 14N125RWSB 14N125FWSB 100
1-1/2 14N150FPWB 14N150RWSB 14N150FWSB 100
1-3/4 — 14N175RWSB 14N175FWSB 100
2 14N200FPWB 14N200RWSB 14N200FWSB 100
2-1/2 14N250FPWB 14N250RWSB 14N250FWSB 100
3 14N300FPWB 14N300RWSB 14N300FWSB 100
Stop wrestling with
Fastener problems . . .
Call us for
easy solutions!
Heli-Coil Screw Thread Inserts
Heli-Coil Inserts are precision formed screw thread
coils of 18-8 (Type 302/304) stainless steel wire
having a diamond shaped cross-section. They are
manufactured from round wire cold rolled into
a diamond shape producing an ultimate tensile
strength of approximately 200,000 to 250,000 P.S.I.
(a hardness of Rc 43-50). The resultant surface
finish is a mirror-like 8-16 micro-inches. This wire is
then wound into a spiral coil which, when installed
into Heli-Coil tapped holes, provides permanent
conventional 60O Internal Screw threads. The
assembled insert accommodates any standard bolt or
screw (MIL-S-7742) and MIL-S-8879 (UNJ controlled
radius root) male threaded members.
There are two designs of
Heli-Coil Inserts:
• Standard which provides a
smooth free-running thread;
AND
• Screw Lock which provides
self-locking torque on the male
member by a series of “chords” on one or more of
the insert coils. Screw-Lock Inserts are dyed red for
identification.
What Types, Sizes and Materials
Heli-Coil inserts are larger in diameter before
installation than the tapped hole. During
installation the inserting tool applies torque
to the tang, reducing the diameter of the
leading coil permitting it to enter the tapped
thread. After installation each high tensile
stainless steel coil of the insert expands
outward with a spring-like action permanently
anchoring the insert.
Both Standard and Screw-Lock Inserts are available
from stock in the following sizes:
• UNC - Sizes #2 and UNF - Sizes #3 through 1-1/2”-
Five lengths each sizes
• Inserts are also available in UNEF, UNS, 8UN,
12UN, 16UN, Metric, Spark Plug and Pipe Thread
• In addition to Stainless Steel, inserts are available
in Phosphor Bronze and Inconel X-750
CALL TODAY for Complete List
57
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MANAGED INVENTORY SYSTEM
Customized Jobsite Managed Inventory Programs -
Call Us Today For More Information
58 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HEX KEYS / DOWEL PINS
Dowel Pins
Oversized Dowel Pins
Cotter Pins
Spring Pins
(Roll Pins)
Short and Long Arm Inch Series
Meets the requirements of ASME/ANSI B18.3 and Fed.
Std. GG-K-275 AMED 1
(Torque requirements apply to Long Arm Series only)
• Precision Tolerances • Heat Treated Alloy Steel • Black
Finish
Short and Long Arm Metric Series
Meet the requirements of ASME/ANSI B18.3
• Precision Tolerances • Heat treated Alloy Steel • Black
Finish
Long Arm
Nominal Part Std.
Size No. Pack
.035 58007 100
.050 58003 100
1/16 58001 100
5/64 58002 100
3/32 58004 100
7/64 58005 100
1/8 58006 100
9/64 58010 100
5/32 58012 100
3/16 58014 100
1/4 58016 50
7/32 58018 50
5/16 58020 25
3/8 58022 25
7/16 58023 10
1/2 58024 10
9/16 58026 10
5/8 58028 5
3/4 58030 5
7/8 58032 2
1 58034 2
1-1/4 58036 1
1-1/2 58038 1
1-3/4 58040 1
2 58042 1
Short Arm
Nominal Part Std.
Size No. Pack
.028 57002 100
.035 57004 100
.050 57006 100
1/16 57008 100
5/64 57010 100
3/32 57012 100
7/64 57013 100
1/8 57014 100
9/64 57018 100
5/32 57020 100
3/16 57022 100
7/32 57024 100
1/4 57026 50
5/16 57028 50
3/8 57030 25
7/16 57031 10
1/2 57032 10
9/16 57034 10
5/8 57036 10
3/4 57038 5
7/8 57040 5
1 57042 5
1-1/4 57044 1
1-1/2 57046 1
Long Arm
Nominal Part Std.
Size No. Pack
0.9 58048 100
1.3 58049 100
1.5 58050 100
2 58052 100
2.5 58054 100
3 58056 100
4 58058 100
5 58060 100
6 58062 50
8 58064 50
10 58066 25
12 5808 10
14 58090 10
17 58092 5
19 58094 5
Short Arm
Nominal Part Std.
Size No. Pack
0.7 57129 100
0.9 57131 100
1.3 57135 100
1.5 57116 100
2 57118 100
2.5 57120 100
3 57122 100
4 57124 100
5 57126 100
6 57128 50
8 57130 50
10 57132 25
12 57133 10
14 57134 10
17 57138 1
19 57142 1
22 57144 1
Not listed...
It may be in stock or
we can order it for you!
Dowel Pin
59
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SOCKET SCREWS
Standard 1960
Series Socket
Head
Cap Screws
Low Head Socket
Head Cap Screws
Coarse & Fine
Thread Series
Socket Shoulder
Screws
(Stripper Bolts)
18-8 Stainless
Steel Socket
Head Screws
Flat Head Socket
Cap Screws
Button Head
Socket Head Cap
Screws
Square Head Set
Screws Cup Point
1/2 Dog Point
18-8 Stainless Steel
Socket Set Screws
Cup Point
Socket Cap Screws
Socket Set Screws
Coarse & Fine
Thread
Oval Point
Cone Point
Kurled Point
Flat Point
60 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
METRIC FASTENERS
Metric Fasteners
NEFCO Supplies a full line of Metric Fasteners in both DIN and ISO Standards.
Available Product Offerings:
• A2 (18-8) and A4 (316) Stainless Steel Hex Cap Screws
and Sockets
• Socket Products Din 912, Button Head, Flat Head, Low
Head, and Headless
• Dowel Pins
• Hex Nuts - Class 6.8, 10, 12 - Plain, Zinc, A2, A4, Nylon
Insert
• Machine Screws - Slotted or Phillips - Cheese, Flat or
Round Head
• Flat Washers - A325, Fender, Class 10 and more
• Lock Washers - Split, Internal Tooth, External Tooth, and
more
• All Thread Rod in 1 meter lengths, with special lengths
upon request
• Custom orders made to your print
• Hex Cap Screws (Bolts) Grade 4.6, 8.8, 10.9, 12.9 in both plain and zinc plated
or custom plated to your specifications
Things To Remember:
F8.8 is approximately equal to grade 5
F10.9 is approximately equal to grade 8
F12.9 is the standard for socket products. Although other grades of socket products are available in
Europe, 12.9 is generally only imported to the U.S. To read the size of a metric fastener, the
nominal diameter is listed first, followed by the thread pitch, measured in millimeters, as the
distance from the peak of one thread to the next. Then the useable length is listed in millimeters.
Example: M 12 - 1.75 x 50
• 1 Millimeter = .03937 inches
• 1 inch = 25.4 millimeters
The following tables should help you to identify the products that you need.
If they have it overseas we can have it imported for you.
If you need help identifying the exact product that you need, call a NEFCO representative today!
Qty. U.S. Metric Metric U.S.
Length 1 in 25.4 mm 1 mm 0.03937 in
1 ft 304.8 mm 1 mm 0.00328 ft
Area 1 sq in 645.16 sq mm 1 sq mm 0.00155 sq ft
Volume 1 gal 3.785 litres 1 litre 0.2542 gal
Force 1 lb 4.448 N 1 N 0.2248 lb
Pressure 1 psi 6895 Pa or 0.006895 MPa 1 MPa 145.1 psi
Torque 1 in-lb 0.113 nm 1 nm 8.851 in-lb
1 ft-lb 1.356 nm 1 nm 0.738 ft-lb
U.S. / Metric Conversion Equivalents
Other common conversions:
1 N = 1 kg • m/s2
1 Pa 2 1 N/m2
1 MPa = 1 N/mm2
Example: To convert length to mm, multiply
total inches by 25.4
QQ
Q
61
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
METRIC FASTENERS
Metric Min. Prod Min. Tensile Core Hardness Rockwell Mint Yield Grade
Property Strength Strength Strength Identification
Class Material Size Range (MPA) (MPA) Min. Max. (MPA) Marking
4.6 Low or Medium carbon steel M5 - M36 225 400 B67 B99.5 240 4.6
8.8 Medium carbon steel: quenched M5 - M16 580 800 C22 C32 640 8.8
and tempered M16 - M36 600 830 C23 C34 660 8.8
10.9 Low carbon alloy steel: M5 - M36 830 1040 C32 C39 940 10.9
quenched and tempered
12.9 Alloy steel: quenched and tempered M1.6 - M36 970 1220 C39 C44 1100 12.9
Metric Mechanical Specifications with Grade Markings
Mechanical Properties of Metric Nuts
Thread Tensile Stress Areas, U.S. Metric
Conversion Equivalents
Mechanical Properties of Metric Nuts
Nominal Proof Load Grade Identification
Standard and Class Material Size (mm) Stress (N/mm2) Marking
ISO 898/2 - Class 8 Medium carbon steel Up to 4 800 8
quenched and tempered Over 4 to 7 810
Over 7 to 10 830
Over 10 to 16 840
Over 16 to 39 920
ISO 898/2 - Class 10 Low carbon alloy steel Up to 10 1040 10
quenched and tempered Over 10 to 16 1050
Over 16 to 39 1060
ISO 898/2 - Class 12 Alloy steel quenched and tempered Up to 7 1150 11
Over 7 to 10 1160
Over 10 to 16 1190
Over 16 to 39 1200
Over 16 to 39 920
Metric Hex Nut Specifications and Dimensions
Source: DIN 934
d1 M1 M1.4 M1.6 M2 M2.2 M2.3 M2.5 M2.6 M3 M3.5 M4 M5
e (min) 2.71 3.28 3.41 4.32 5.2 4.88 5.45 5.45 6.01 6.58 7.66 8.79
s 2.5 3 3.2 4 4.5 4.5 5 5 5.5 6 7 8
m (max) 0.8 1.2 1.3 1.6 1.8 1.8 2 2 2.4 2.8 3.2 4
d1 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M48
e(min) 11.05 14.38 18.9 21.1 24.49 26.75 29.56 32.95 35.03 39.55 45.2 50.85 55.37 60.79 66.44 71.3 82.6
s 10 13 17 19 22 24 27 30 32 36 41 46 50 55 60 65 75
m(max) 5 6.5 8 10 11 13 15 16 18 19 22 24 26 29 31 34 38
Property Class 8, 10 and 12
Property Class 6
62 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RIVET TOOLS
HP-2® / 39000
• Precision die cast body of high strength aluminum alloy
• A steel insert into which the working nose-piece is
screwed
• A fulcrum pin that cannot rotate
• Heat treated carbon steel upper handle
• Long life jaws
Here’s Why
Even in high strength aluminum alloy, the threads into
which the working nose-piece is screwed are not strong
enough to resist the pulling force of repeated rivet setting,
or the excessive torque often applied when tightening
nose-pieces. The HP-2 has a special steel insert which
eliminates this.
A fulcrum pin that rotates during rivet setting will
elongate the engaging holes in the aluminum body causing
premature and expensive tool failure. Marson’s HP-2
has a unique cold formed, heat treated steel fulcrum pin
with a square shoulder which fits into a square hole in
the aluminum body. The Fulcrum Pin cannot rotate. The
opposite end passes through a heat treated steel bushing
that also fits into a square hole. Includes nose-pieces
for setting 3/32”, 1/8”, 5/32” and 3/16” diameter rivets.
Weighs 1 lb, 3 oz.
Part No. Description
39000 39000 HP-2 Riveter
Big Daddy® 39031
Marson’s Big Daddy™ has a steel insert cast into the
aluminum body to provide stronger threads for the nose-
pieces listed.
Reduction gear design, high strength alloys and long
handles provide easy installation of Klik-Fast Rivets
through the 1/4” diameter in all alloys.
A One-piece collect case eliminates the need to adjust the
tool when changing rivet diameters. Spare nose-pieces
are stored in the single unit body construction. Standard
nose-pieces included are 5/32”, 3/16” and 1/4”. Setting of
1/8” diameter rivets requires a special nose-piece.
• This tool is also capable of setting 3/16” and 1/4” Kilk-
Split and Monobolt® rivets
• Adapter Kit #39009 - Big Daddy Head Extension Kit
adds 2-1/2” in length of head
• Weighs 3-3/4 lb
Part No. Description
39031 Big Daddy Riveter
Air
Hydraulic M-3
Heavy-Duty Riveter
39054
This heavy-duty air/hydraulic
riveter with its newly designed
machined forged head can
hold up under demanding
continuous use. The steel
forged head allows for
continuous full operating power
and less internal wear. The M-3
will set blind rivets from 1/8”
diameter in all alloys, up to 3/16”. Included with the M-3
are standard 1/8”, 5/32”, and 3/16” nosepieces, a service
wrench, swivel inlet air coupler and a mandrel collection
bottle. The recommended airline pressure is 85-95 PSI.
Weighs 3.0 lbs.
Part No. Description
39054 39054 M-3 Riveter
Air Hydraulic V-2 79014
Riveter
The V2 air/hydraulic riveter will
set rivets from 3/32” diameter
in all materials, up to 3/16”.
Pulling force of 1,940 lbs.
with a stroke of .551". The
recommended airline pressure
is 85-95 PSI.
Part No. Description
79014 79014 V2 Riveter
63
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RIVETS
A - First Letter Rivet material (A - Aluminum, S - Steel, C - Copper, SS - Stainless Steel)
B - Second Letter Style of Head (B - Buttonhead, C - Countersunk)
L - Third Letter (if any) Large Flange Head
6 - First Number Diameter in 32nd’s
6 - Second Number Maximum Grip Length in 16th’s
A - Final Letter Mandrel Material (A - Aluminum, S - Stainless Steel) No letter indicates Steel
Rivet Code
Explanation:
Example: ABL6-
6A
• For blind fastening where there is no access to oposite side
of work
• Simple to install
• Wide variety of head styles and lengths available from 3/32"
to 1/4" diameters.
Steel/steel, Aluminum/
aluminum, Aluminum/steel,
Stainless/stainless, Stainless/
steel, Copper/brass, Copper/
steel
Aluminum/steel, aluminum/
aluminum, Stainless/stainless
Aluminum/steel, Steel/steel
Aluminum/aluminum
Steel/steel
Steel/steel,
Aluminum/aluminum,
Stainless/stainless
Aluminum/steel
Stainless/steel,
aluminum/aluminum
Nylon
• Large footprint on blind side
• Multi-grip capability
• Oversized hole tolerant
• Great for soft or brittle materials
• Retained mandrel increases shear and tensile strength
• Use in high vibration applications
• Mandrel breaks flush when used in mid-grip range
• Moisture-resistant due to tight seal
• 1/8" to 3/16" diameters.
• Permanently retained mandrel provides increased shear
and tensile values
• Use in high vibration applications
• Provides weather-resistant joint
• Available in 3/6" and 1/4" diameters
• Small flange rivet used primarily for fastening decorative
materials on boats, automobiles, trucks & other motor
vehicles.
• Best suited to applications where a discreet, secure
installation of non-critical components is needed.
• Precision-molded, all-nylon
• Secure lock prevents pull-out
• Fasten plastic to plastic, plastic to metal or plastic to
fiberglass
• High clamp up
• High shear strength
• Creates a wide bearing surface
• 1/4" diameter
Rivet Type Features/ Benefits Available In
Open End
Closed End
Multi-Grip
Tri-Bulb
Q-Lok
• Moisture-resistant due to tight seal
• Greater shear and tensile strength
• Mandrel is retained 100% of the time
• 1/8" to 1/4" diameters
• Extended grip range capacity
• Reduces inventory (fewer sizes required)
• Use as a standard open end rivet
• 1/8" to 3/16" diameters.
Head Styles
Buttonhead
Special
Application
Plastic
T-Rivets
• Low profile head diameter is twice
the rivet body diameter, providing
adequate bearing surgace for nearly all
appllications.
• Open-end offers the broadest selection
of sizes available.
Large Flange
• Provides greater bearing surface for
fastening soft and brittle facing
materials and oversize facing holes.
• Works well with solft materials, where
the increased flange dia. protects the
integrity of the application.
Countersunk
• 120° countersunk rivets for applications
where fulsh appearance is required.
Klik-Lok
64 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
D
O
M
E
S
T
I
C
M
A
T
E
R
I
A
L
S
Providing Products to meet the
“BUY AMERICAN” Provisions of
the ARRA Stimulus Program
Channel
Available in all
Congurations:
Deep, Shallow, Solid,
Back-To-Back, with Holes, Slots
or Knock-outs
Available in all Finishes:
Plain, Pre- or Hot-Dipped Galvanized,
PVC Coated or Green (Painted)
Available in all Materials:
Steel, Stainless Steel (Types 304 or
316), Aluminum or Fiberglass
Lengths:
10 or 20 ft. standard lengths;
Cut-To-Order
Strut and Strut Accessories
Accessories
Strut Clamps, Spring Nuts, Angles,
Splices, Washers, Post Channels, etc.
Available in all Finishes:
Plain, Pre- or Hot-Dipped Galvanized,
PVC Coated or Green (Painted)
Available in all Materials:
Steel, Stainless Steel (Types 304 or
316), Aluminum or Fiberglass
Mechanical
Wedge Anchors, Drop-
Ins, Studs
Carbon Steel, Galvanized, Stain-
less Steel (Type 304 and 316)
Adhesive
Acrylic and Epoxy Adhesives
Anchors
Engineered Pipe Hanger Support Systems
Pre-Insulated Supports - Anchors / Slides / Guides
• Engineer and Design per Plans • P.E. Stamped Documents and Drawings
and Specications • Supports Located on Drawings
• Fabricate and Supply • Pipe Stress Analysis (if required)
• Detailed Submittals • Field Walk-Through & Verication
Pipe Hangers and Supports
• Beam Clamps
• Pipe Clamps
• Riser Clamps
• Clevis
• Threaded Rod
• Guides, Shields & Saddles
• Concrete inserts
• Brackets
Access Doors
• Wall Access Doors - Rated
or Non-Rated / Prime
Coated or Stainless Steel
• Duct Access Doors
• Roof Hatches
• Floor Doors
Fasteners
• Heavy Hex Bolts
• Hex Nuts
• Hex Cap Screws
• Washers
All Materials and Finishes
Firestopping
• Elastomeric
and Silicone
Sealants
• Mortar
• Pillows
• Pads
• Collars
• Wrap Strips
Mechanical Anchoring
Seismic/Cracked Concrete Anchors
. . . . . . .68 - 75, 80, 91, 101, 104
Spike® Pre-Expanded Anchors 102
Tapcon® Screw Anchor . . . . . 100
Tapper® Screw Anchors. . . . . 101
Threaded Rod Anchoring 93
Vertigo™ Threaded Rod Anchoring
. . . . . . . . . . . . . . . . . . . . . . . . 98 - 99
Zamac/Nylon Nailin® Anchors 103
Powder Actuated Fastening
Hybrid Fasteners. . . . . . . . . . 122
Overhead Fastening . . 123 - 124
"Powers" Powder Actuated Tools
. . . . . . . . . . . . . . . . . . . . . . 118
RAMSET Powder
Powder Actuated Fasteners
. . . . . . . . . . . . . . . . . 121 - 122
Powder Fastening Tools . . . . 119
Powder Loads . . . . . . . . . . . 120
Powder Tools For Overhead 123
Gas Fastening Systems
POWERS
STICK-E Tools . . . . . . . 111 - 114
STICK-E Accessories . . . . . . 115
Gas Drywall Track Tools 116 - 117
RAMSET
Gas Fastening for Electrical and
Mechanical Trades. . . 111 - 112
Gas Drywall Track Tools . . . . . 117
T3 Tool Accessories. . . . . . . 113
Anchors
Quick Reference
SAMMY SUPER SCREW
Adhesive / Epoxy Anchoring
Acrylic/Adhesive Anchoring 74 - 80
Epoxy/Adhesive Anchoring 74 - 80
Epoxy / Cracked Concrete
Approved . . . . . . . . . . . . 74 - 80
Epoxy/Acrylate Anchoring 74 - 80
Threaded Anchoring Rod &
Square Plate Washers (For Epoxy
Anchors) ................81
Mechanical Anchoring
Bang-It™/Wood-Knocker™ . . . . 87
Cracked/Uncracked Concrete
Approved
. . . . 68 -73, 89, 91, 98, 101, 104
Expansion Shield Anchors 104 - 105
Hollow-Set™ Drop-In Anchors 90, 105
Hollow Wall Anchors. . 105 - 110
Mechanical Anchor Selection
Guide............... 66 - 67
Power-Bolt™ Sleeve Anchors 86
Powers® Sleeve Anchors . . . . 84
Powers® Wedge-Bolt™ . . . 72, 88
Powers® Wedge Anchors 68 - 70, 82
Powers® Dropin™ Anchors 90 - 91
Powers® Hollow-Set™ Anchors 90, 105
Red Head® LDT Anchors . . . . 89
Red Head® Sleeve Anchors . . . 85
Red Head® Wedge Anchors 71, 83
Red Head Multi-Set Drop-in
Anchors .................92
Sammys™ Threaded Rod
Anchoring . . . . . . . . . . . 94 - 97
Vertigo™
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
66 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MECHANICAL ANCHOR SELECTION GUIDE
Page Item Name Use In Material/Finish Sizes
4, 5 Wedge Concrete or Stone Zinc Plated, Galvanized Steel ¼" to 1¼"dia
Anchor 304 & 316 Stainless Steel 1¾” to 12” O.L.
6, 7, 18 Sleeve Concrete, Brick, Stone Zinc Plated Carbon Steel ½" to ¾" dia
Anchor Grout Filled/Hollow Block 304 Stainless Steel Up to 6¼” O.L.
8 Power-Bolt Concrete, Brick, Stone Zinc Plated Carbon Steel ¼" to ¾" dia
Grout Filled/Hollow Block 304 Stainless Steel Up to 8¼” O.L.
10, 11 Wedge Bolt Concrete, Stone or Brick Zinc Plated, Galvanized Steel ¼" to ¾" dia.
LDT Anchors 410 Stainless Steel 1¼” to 15” O.L.
8, 9 Drop-Ins Concrete or Stone Zinc Plated Carbon Steel ¼ -20 to ¾ - 4.5
304 & 316 Stainless Steel UNC Thread
11 Snake™ Concrete Zinc Plated Carbon Steel ¼" to ¾" dia.
Anchor UNC Thread
22 Hollow Set Hollow Concrete Block, Zamac Alloy Body w/ Carbon Steel ¼" to 5/8" dia.
Drop-In Brick, Hollow Core Plank or 304 Stainless Steel Cone
21 Screw Lead Normal Weight Concrete Soft Metal (Lead Alloy) #6 - #18 Screw
Anchors Concrete Masonry, Brick ¾" to 1½" L.
22 Calk-In Concrete, Block, Brick, Antimonial Lead Alloy #8 screw - ½" dia.
Anchors Hollow Concrete Masonry Zamac Alloy Cone UNC Thread
19 Spikes Normal Weight Concrete Zinc Plated Carbon Steel 3/16" to ½" dia.
(Rawl Spike) Ltwt Concrete, CMU 316 Stainless Steel 1"- 6½" O.L.
20 Zamac Nail Drive Concrete, Brick, Zamac Alloy or Nylon Body 3/16" to ¼" dia.
Anchors Hollow Masonry, Stone Carbon or Stainless Steel Nail 7/8"- 6" O.L.
24 Plastic Hollow Wall, Drywall Engineered Plastic
3/16" to ¼" dia.
Conicals Brick, Block or Concrete ¾"- 1½" O.L.
21 Single Shell Concrete, Block, Zamac Alloy ¼" x ¾" dia.
Expansion Anchor Brick or Stone UNC Thread
21 Double Shell Solid Concrete, Block Zamac Alloy ¼" x ¾" dia.
Expansion Anchor Brick or Stone UNC Thread
17 Screw Anchor Concrete, Brick, Block Zinc Plated, Perma-Seal Steel 3/16" to 3/8" dia.
(Tapcon™/Tapper®) Concrete Masonry 410 or 304 Stainless Steel 1¼"- 6" O.L.
25 Toggler™ / Plywood, Drywall Engineered Plastic #6 - #14 Screw
Pop-Toggle™ Plaster, Fiberglass 1/8"x ¾" Wall Thk
25 SnapToggler™ Hollow Wall, Drywall Carbon Steel, Stainless Steel 3/8" - 9 ½"
Strap-Toggle™ Brick, Block Engineered Plastic Grip Range
23 Toggle Bolts Hollow Block, Wall Board Steel/Stainless Steel 1/8" to 1/2"
Combo Head Plaster
25 Molly Bolts/ Hollow Wall, Drywall Steel 1/8" x 1¾"
Polly Anchors Brick, Block
24 E-Z Anchor™ Drywall Plastic, Steel #6, #8, #10
Screw Dia.
16 Wood Knocker Concrete, Ltwt Concrete Carbon Steel & Plastic ¼" to ¾"
16 Bang-It Concrete, Ltwt Concrete Carbon Steel & Plastic ¼" to ¾"
12-15 Vertigo®/ Steel, Wood, Concrete Carbon Steel ¼" to ½"
Sammy’s®
24 Wall-Dog™ Wallboard, Plywood Case Hardened Steel 3/16" to 1¼"
67
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MECHANICAL ANCHOR SELECTION GUIDE
High Speed Solutions
Steel Vertigo l l l n n n n n
Wood Vertigo l l l n n n n n n
Concrete Vertigo m l l n n n n n n
Pipe Spike m l l n n n n n
Cast-In Place Solutions
Wood Knocker l l l n n n n n n
Bang-It m l m n n n n n n
Specialty Solutions
Hollow-Set Drop-In m m m n n n n n n n n
Rod Hanger Lock-Bolt m m m n n n n n n n n
Mini Drop-In m m m n n n n
High Labor, Old Style Solutions
Steel Drop-In o o o n n n n n n n n
Double Expansion o o o n n n n n n n n n
Single Expansion o o o n n n n n n n n
Performance Data
LEGEND Industrial Base Rod Tip/Drill
Factors Material Sizes Diameter (ANSI)
Speed of Installation
Cost of Installed Product
Installation Ease
Concrete
Metal
Wood
Poured Concrete
Metal Pan Deck
Hollow Precast
Cindercrete
1/4"
3/8"
1/2"
5/8"
3/4"
3/16"
1/4"
3/8"
1/2"
11/16"
1"
1-3/16"
1-1/4"
lFast / Low / Easy
mMedium / Average
oSlow / High / Difficult
nCharacteristics / Sizes
68 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Anchor Size Thread Min. Std. P/N
(Drill Dia.) Length Embed. Box SD2
3/8" x 3" 1-7/8" 1-5/8" 50 7413SD2
3/8" x 3-1/2" 2-3/8" 1-5/8" 50 7414SD2
3/8" x 3-3/4" 2-5/8" 1-5/8" 50 7415SD2
3/8" x 5" 3-7/8" 1-5/8" 50 7416SD2
1/2" x 3-3/4" 2-3/8" 2-1/4" 50 7422SD2
1/2" x 4-1/2" 3-1/8" 2-1/4" 50 7423SD2
1/2" x 5-1/2" 4-1/8" 2-1/4" 50 7424SD2
1/2" x 7" 5-5/8" 2-1/4" 25 7426SD2
1/2" x 8-1/2" 7-1/8" 2-1/4" 25 7427SD2
5/8" x 4-3/4" 25 7435SD2
5/8" x 5" 3-1/2" 2-3/4" 25 7433SD2
5/8" x 6" 4-1/2" 2-3/4" 25 7434SD2
5/8" x 7" 5-1/2" 2-3/4" 25 7436SD2
5/8" x 8-1/2" 7" 2-3/4" 25 7438SD2
3/4" x 5-1/2" 3-5/8" 3-3/8" 20 7442SD2
3/4" x 6-1/4" 4-3/8" 3-3/8" 20 7444SD2
3/4" x 7" 5-1/8" 3-3/8" 20 7446SD2
3/4" x 8-1/2" 6-5/8" 3-3/8" 10 7448SD2
SEISMIC / TENSION ZONE ANCHORS
How do you order the
new design anchors:
Give your sales rep the specification,
the IBC code year of your project, or
that you need to use the "Cracked Con-
crete" Design Anchors. We will provide
you with the appropriate anchor. Cur-
rently these products are available from
either RED HEAD, POWERS, SIMPSON
or USP/COVERT. Availability is subect to
approvals conforming to the 2003 IBC
SECTION ACI-318 Appendix D.
WHY are different style
anchors needed:
In 2003 the International Building
Code (IBC) introduced state-of-the-art
requirements for design, testing and
evaluation of concrete anchors. The
BUILDING CODE serves as the basic
"ROADMAP" that an engineer uses
to design the structure. The previ-
ous codes did NOT directly address
post-installed anchoring applications in
reinforced concrete. The new 2003 and
2006 codes do address this new anchor
design requirement.
WHEN do you need the
new style anchors:
If the IBC code in effect for your job is
updated to the 2003 or 2006 Code you
are required to use the new design style
"Cracked Concrete" Anchor.
Hilti "TZ" Equivalents — IBC
2006
TESTED
TO
MEET
Cracked Concrete Approved /
Category 1
LOOK to the following pages for
ICC-ES LISTED
2006 Code Compliant Solutions
CRACKED AND UNCRACKED CONCRETE
Complete performance values and specifications are immediately available to help you comply
with the new IBC Codes. Please contact your NEFCO Representative for more information
Power-Stud+™ SD2 Wedge Anchors
• Fully threaded, torque-controlled, wedge expansion
anchor.
• Designed for consistent performance in cracked and
uncracked concrete.
• Suitable base materials: Normal-Weight Concrete,
Structural sand-lightweight concrete and concrete over
metal deck.
• Manufactured with a zinc plated carbon steel body and
stainless steel expansion clip for premium performance.
• Nominal drill bit size is the same as the anchor diameter.
Hilti® Equivalents:
Powerstud +SD2: Compare to
Kwik Bolt TZ Anchors
IBC
2006
TESTED
TO
MEET
69
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SEISMIC / TENSION ZONE ANCHORS
Power-Stud™+SD1 Wedge Anchors
• Fully-threaded, torque-controlled wedge expansion
anchor.
• Consistent performance in cracked or uncracked
concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• Zinc plated carbon steel body, expansion clip, nut and
washer.
• Nominal drill bit size is the same as the anchor diameter.
Accessories
Anchor Size Thread Min. Std. P/N
(Drill Dia.) Length Embed. Box SD1
1/4" x 1-3/4" 3/4" 1-1/8" 100 7400SD1
1/4" x 2-1/4" 1-1/4" 1-1/8" 100 7402SD1
1/4" x 3-1/4" 2-1/4" 1-1/8" 100 7404SD1
3/8" x 2-1/4" 1-1/4" 1-5/8" 50 7410SD1
3/8" x 2-3/4" 1-5/8" 1-5/8" 50 7412SD1
3/8" x 3" 1-7/8" 1-5/8" 50 7413SD1
3/8" x 3-1/2" 2-3/8" 1-5/8" 50 7414SD1
3/8" x 3-3/4" 2-5/8" 1-5/8" 50 7415SD1
3/8" x 5" 3-7/8" 1-5/8" 50 7416SD1
3/8"x 7" 5-7/8" 1-5/8" 50 7417SD1
1/2" x 2-3/4" 1-3/8" 2-1/4" 50 7420SD1
1/2" x 3-3/4" 2-3/8" 2-1/4" 50 7422SD1
1/2" x 4-1/2" 3-1/8" 2-1/4" 50 7423SD1
1/2" x 5-1/2" 4-1/8" 2-1/4" 50 7424SD1
1/2" x 7" 5-5/8" 2-1/4" 25 7426SD1
1/2" x 8-1/2" 7-1/8" 2-1/4" 25 7427SD1
1/2" x 10" 25 7428SD1
1/2" x 12" 25 7429SD1
5/8" x 3-1/2" 2" 2-3/4" 25 7430SD1
5/8" x 4-1/2" 3" 2-3/4" 25 7432SD1
5/8" x 5" 3-1/2" 2-3/4" 25 7433SD1
5/8" x 6" 4-1/2" 2-3/4" 25 7434SD1
5/8" x 7" 5-1/2" 2-3/4" 25 7436SD1
5/8" x 8-1/2" 7" 2-3/4" 25 7438SD1
5/8" x 10" 8-1/2" 2-3/4" 25 7439SD1
5/8" x 12" 25 7437SD1
Hilti® Equivalents:
Powerstud +SD1: Compare to
Hilti® Kwik Bolt 3 (Kwik Bolt 3 is
NOT ICC-ES Approved)
Anchor Size Thread Min. Std. P/N
(Drill Dia.) Length Embed. Box SD1
3/4" x 4-1/4" 2-3/8" 3-3/8" 20 7440SD1
3/4" x 4-3/4" 2-7/8" 3-3/8" 20 7441SD1
3/4" x 5-1/2" 3-5/8" 3-3/8" 20 7442SD1
3/4" x 6-1/4" 4-3/8" 3-3/8" 20 7444SD1
3/4" x 7" 5-1/8" 3-3/8" 20 7446SD1
3/4" x 8-1/2" 6-5/8" 3-3/8" 10 7448SD1
3/4" x 10" 8-1/8" 3-3/8" 10 7449SD1
3/4" x 12" 10-1/8" 3-3/8" 10 7451SD1
7/8" x 6" 2-3/4" 3-7/8" 10 7450SD1
7/8" x 8" 4-3/4" 3-7/8" 10 7452SD1
7/8" x 10 6-3/4" 3-7/8" 10 7454SD1
1" x 6" 2-3/8" 4-1/2" 10 7461SD1
1" x 9" 5-3/8" 4-1/2" 10 7463SD1
1" x 12" 8-3/8' 4-1/2" 5 7465SD1
1-1/4" x 9" 4-3/4" 5-1/2" 5 7473SD1
1-1/4" x 12" 7-3/4" 5-1/2" 5 7475SD1
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Adjustable Torque Wrench
• 1/2" Square Drive
Part No. Description
08465 Adjustable Torque Wrench, 10-150 ft.-lbs.
08466 Adjustable Torque Wrench, 25-250 ft.-lbs.
Hand Pump/Dust Blower
• For proper hole cleaning after drilling
• Removes concrete dust and debris
Part No. Description
08280 Hand Pump/Dust Blower
See page 82 for Stainless Steel and Galvanized Power-Stud™
70 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SEISMIC / TENSION ZONE ANCHORS
Power-Stud™+SD4 Wedge Anchors
304 Stainless Steel Bolt and Clip
• Fully-threaded, torque-controlled wedge expansion anchor.
• Consistent performance in cracked or uncracked concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• 304 Stainless Steel body, expansion clip, nut and washer.
• Nominal drill bit size is the same as the anchor diameter.
Anchor Size Thread Min. Std. P/N
(Drill Dia.) Length Embed. Box SD4
1/4" x 1-1/2" 3/4" 1-1/8" 100 7300SD4
1/4" x 2-1/4" 1-1/4" 1-1/8" 100 7302SD4
1/4" x 3-1/4" 2-1/4" 1-1/8" 100 7304SD4
3/8" x 2-1/4" 1-1/4" 1-5/8" 100 7310SD4
3/8" x 2-3/4" 1-5/8" 1-5/8" 100 7312SD4
3/8" x 3" 1-7/8" 1-5/8" 100 7313SD4
3/8" x 3-1/2" 2-3/8" 1-5/8" 100 7314SD4
3/8" x 3-3/4" 2-5/8" 1-5/8" 100 7315SD4
3/8" x 5" 3-7/8" 1-5/8" 100 7316SD4
1/2" x 2-3/4" 1-3/8" 2-1/4" 100 7320SD4
1/2" x 3-1/2" 2-3/8" 2-1/4" 100 7322SD4
1/2" x 4-1/2" 3-1/8" 2-1/4" 100 7323SD4
1/2" x 5-1/2" 4-1/8" 2-1/4" 100 7324SD4
1/2" x 7" 5-5/8" 2-1/4" 100 7326SD4
5/8" x 3-1/2" 2" 2-3/4" 100 7330SD4
5/8" x 4-1/2" 3" 2-3/4" 100 7332SD4
5/8" x 5" 3-1/2" 2-3/4" 100 7333SD4
5/8" x 6" 4-1/2" 2-3/4" 100 7334SD4
5/8" x 7" 5-1/2" 2-3/4" 100 7336SD4
5/8" x 8-1/2" 7" 2-3/4" 100 7338SD4
3/4" x 4-1/4" 2-3/8" 3-3/8" 100 7340SD4
3/4" x 4-3/4" 2-7/8" 3-3/8" 100 7341SD4
3/4" x 5-1/2" 3-5/8" 3-3/8" 100 7342SD4
3/4" x 6-1/4" 4-3/8" 3-3/8" 100 7344SD4
3/4" x 7" 5-1/8" 3-3/8" 100 7346SD4
3/4" x 8-1/2" 6-5/8" 3-3/8" 100 7348SD4
3/4" x 10" 8-1/8" 3-3/8" 100 7349SD4
7/8" x 8" 4-3/4" 3-7/8" 100 7352SD4
1" x 6" 2-3/8" 4-1/2" 100 7361SD4
1" x 9" 5-3/8" 4-1/2" 100 7363SD4
1" x 12" 8-3/8' 4-1/2" 100 7365SD4
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Power-Stud™+SD6 Wedge Anchors
316 Stainless Steel Bolt and Clip
• Fully-threaded, torque-controlled wedge expansion anchor.
• Consistent performance in cracked or uncracked concrete.
• Suitable for use in normal weight concrete, structural
sand-lightweight concrete and concrete over steel deck.
• Threaded hex nut head / UNC threaded stud
• 316 Stainless Steel body, expansion clip, nut and washer.
• Nominal drill bit size is the same as the anchor diameter.
Anchor Size Thread Min. Std. P/N
(Drill Dia.) Length Embed. Box SD4
1/4" x 1-3/4" 3/4" 1-1/8" 100 7600SD5
1/4" x 2-1/4" 1-1/4" 1-1/8" 100 7602SD5
1/4" x 3-1/4" 2-1/4" 1-1/8" 100 7604SD5
3/8" x 2-1/4" 1-1/4" 1-5/8" 100 7610SD5
3/8" x 2-3/4" 1-5/8" 1-5/8" 100 7612SD5
3/8" x 3" 1-7/8" 1-5/8" 100 7613SD5
3/8" x 3-1/2" 2-3/8" 1-5/8" 100 7614SD5
3/8" x 3-3/4" 2-5/8" 1-5/8" 100 7615SD5
3/8" x 5" 3-7/8" 1-5/8" 100 7616SD5
1/2" x 2-3/4" 1-3/8" 2-1/4" 100 7620SD5
1/2" x 3-3/4" 2-3/8" 2-1/4" 100 7622SD5
1/2" x 4-1/2" 3-1/8" 2-1/4" 100 7623SD5
1/2" x 5-1/2" 4-1/8" 2-1/4" 100 7624SD5
1/2" x 7" 5-5/8" 2-1/4" 100 7626SD5
5/8" x 3-1/2" 2" 2-3/4" 100 7630SD5
5/8" x 4-1/2" 3" 2-3/4" 100 7632SD5
5/8" x 5" 3-1/2" 2-3/4" 100 7633SD5
5/8" x 6" 4-1/2" 2-3/4" 100 7634SD5
5/8" x 7" 5-1/2" 2-3/4" 100 7636SD5
5/8" x 8-1/2" 7" 2-3/4" 100 7638SD5
3/4" x 4-1/4" 2-3/8" 3-3/8" 100 7640SD5
3/4" x 4-3/4" 2-7/8" 3-3/8" 100 7641SD5
3/4" x 5-1/2" 3-5/8" 3-3/8" 100 7642SD5
3/4" x 6-1/4" 4-3/8" 3-3/8" 100 7644SD5
3/4" x 7" 5-1/8" 3-3/8" 100 7646SD5
3/4" x 8-1/2" 6-5/8" 3-3/8" 100 7648SD5
The published length is the overall length of the anchor. Allow for fixture thickness
plus one anchor diameter for the nut and washer thickness when selecting length.
Power-Stud™+SD4
and
Power-Stud +SD6
71
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SEISMIC / TENSION ZONE ANCHORS
Strong-Bolt™ Wedge Anchors
• A wedge anchor specifically designed for optimum
performance in both cracked and uncracked concrete
• Fits most fixtures and installs with common drill bits
sizes and tools.
• Installs like a standard wedge anchor: No need for
special bits or installation tools.
• Zinc-plated, carbon-steel stud with 316 stainless steel clip
Anchor Thread Drill Bit Std. Part
Size Length Diameter Box Number
1/2" x 3-3/4" 2-5/16" 25 STB50334
1/2" x 4-1/4" 2-13/16" 25 STB50414
1/2" x 5-1/2" 4-1/16" 1/2" 25 STB50512
1/2" x 7" 5-9/16" 25 STB50700
1/2" x 8-1/2" 6" 25 STB50812
1/2" x 10" 6" 25 STB50100
5/8" x 4-1/2" 2-7/8" 20 STB62412
5/8" x 5" 3-3/8" 20 STB62500
5/8" x 6" 4-3/8" 5/8" 20 STB62600
5/8" x 7" 5-3/8" 20 STB62700
5/8" x 8-1/2" 6" 20 STB62812
5/8" x 10" 6" 10 STB62100
*3/4" x 5-1/2" 3-5/8" 10 STB75512
*3/4" x 6-1/4" 4-3/8" 10 STB75614
*3/4" x 7"* 5-1/8" 5/8" 10 STB75700
*3/4" x 8-1/2" 6" 10 STB75812
*3/4" x 10" 6" 10 STB75100
*1" x 7" 3-1/2" 5 STB10700
*1" x 10" 3-1/2" 1" 5 STB101000
*1" x 13" 3-1/2" 5 STB1013000
*3/4" and 1" diameter Strong-Bolt Wedge Anchors are Code Listed
ICC-ES ESR-1771 Category 2.
Hilti® Equivalents:
Strong-Bolt™: Compare to
Kwik Bolt TZ Anchors
Trubolt®
+ Siesmic Wedge Anchors
• Used to install pipe, structural or non-structural
equipment that is subject to seismic forces or installed
in the tension zones of cracked and uncracked concrete.
• Constructed of a high-strength threaded stud body,
expansion clip, nut and washer. Anchor bodies are made
of plated carbon steel. The expansion clip consists of a
split cylindrical ring with undercutting grooves.
• Drill bit diameter is the same as the anchor diameter.
Anchor Thread Max Fixture. Std. Part
Size Length Thickness Box Number
3/8" x 3" 1-5/8" 5/8" 50 CWS3830
3/8" x 3-3/4" 2-3/8" 1-3/8" 50 CWS3836
3/8" x 5" 3-5/8" 2-5/8" 50 CWS3850
1/2" x 3-3/4" 2-1/8" 3/4" 25 CWS1236
1/2" x 4-1/4" 2-5/8" 1-1/4" 25 CWS1242
1/2" x 4-1/2" 2-7/8" 1-1/2" 25 CWS1244
1/2" x 5-1/2" 3-7/8" 2-1/2" 25 CWS1254
1/2" x 7" 5-3/8" 4" 25 CWS1270
5/8" x 5" 3-3/16" 1-1/8" 25 CWS5850
5/8" x 6" 4-3/16" 2-1/8" 25 CWS5860
5/8" x 7" 5-3/16" 3-1/8" 25 CWS5870
5/8" x 8-1/2" 5-3/4" 4-5/8" 25 CWS5884
Hilti®
Equivalents:
Trubolt™+:
Compare to
Kwik Bolt TZ
Anchors
See page 83 for standard
Trubolt® Wedge Anchors
Industrial Grade SDS Bits Value Paks
See Pages 321 - 323 in Our Tool Section for a Complete
Selection of Carbide Masonry Bits
Size (In)
Dia. x U.L. x O.L. Part No.
Std
Box Carton
5/32 x 4 x 6 0801 25 500
3/16 x 2 x 4 0803 25 450
3/16 x 4 x 6 0805 25 500
3/16 x 6 x 8 0807 25 450
3/16 x 8 x 10 0809 25 300
7/32 x 4 x 6 0811 25 500
7/32 x 6 x 8 0813 25 450
7/32 x 8 x 10 0815 25 300
Size (In)
Dia. x U.L. x O.L. Part No.
Std
Box Carton
1/4 x 2 x 4 0817 25 450
1/4 x 4 x 6 0819 25 500
1/4 x 6 x 8 0821 25 450
1/4 x 8 x 10 0823 25 300
5/16 x 4 x 6 0825 25 500
3/8 x 4 x 6 0827 25 300
1/2 x 4 x 6 0829 15 180
5/8 x 6 x 8 0831 15 120
72 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SEISMIC / TENSION ZONE ANCHORS
Wedge-Bolt™+ Anchors
Wedge-Bolt+ Blue Tip - designed to be used
with a matched tolerance Wedge-Bit™ for opti-
mum performance. The Wedge-Bolt™ works in
fixture clearance holes that are 1/16" over nomi-
nal, which is typical of standard fixture holes
used in steel fabrication. Wedge-Bolts®+ must
be installed using Wedge-Bits™
• The Wedge-Bolt+ anchor is a one piece,
heavy duty screw anchor with a finished
hex head. It is simple to install, easy to
identify and fully removable.
• Designed for consistent and reliable
performance in cracked and uncracked
concrete.
Anchor Materials:
Zinc plated Carbon Steel body, Hex head
Size Range:
¼" dia. (Uncracked Concrete), 3⁄8"
dia. through ¾" dia. (Cracked and
Uncracked Concrete), Grouted CMU
Suitable Base Materials:
Normal weight concrete, Structural
sand-lightweight concrete, Concrete
over steel deck
HD Straight Shank
Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1370 1/4" 2-¾" / 4"
1372 1/4" 4" / 6"
1380 3/8" 4" / 6"
1384 3/8" 11" / 13"
1390 1/2" 4" / 6"
1390 1/2" 11" / 13"
1396 5/8" 11" / 13"
1397 3/4" 11" / 13"
SDS-Max Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1354 1/2" 8" / 13"
1356 5/8" 8" / 13"
1358 3/4" 8" / 13"
Spline Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1340 1/2" 8" / 13"
1342 1/2" 11" / 16"
1344 5/8" 8" / 13"
1348 1/2" 8" / 13"
Wedge-Bits™
An integral part of the Wedge-Bolt+ Anchor System and is
required for use with Wedge-Bolt+™ Blue Tip Anchors.
Hilti® Equivalents:
Wedge-Bolt™+: Compare to HUS-H
Screw Anchors (HUS-H anchors are
NOT ICC-ES Approved)
See page 88 for more Wedge Bolt Styles
SDS-Plus Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1312 1/4" 2" / 4"
1314 1/4" 4" / 6"
1316 3/8" 4" / 6"
1318 3/8" 6" / 8"
1332 3/8" 10" / 12"
1320 1/2" 4" / 6"
1322 1/2" 8" / 10"
Part Usable/Overall
No. Size Lengths
1334 1/2" 10" / 12"
1324 5/8" 6" / 8"
1326 5/8" 10" / 12"
1336 5/8" 16" / 18"
1328 3/4" 6" / 8"
1330 3/4" 10" / 12"
Size
(Inch)
Wedge
Bit Dia.
Min.
Embed.
Std
Box
Carbon
Steel
Mechanically
Galvanized
1/4 x 1-1/4 1/4" — 100 7204SD —
1/4 x 1-3/4 1/4" — 100 7206SD —
1/4 x 2-1/4 1/4" 1-3/4" 100 7208SD —
1/4 x 3 1/4" 1-3/4" 100 7210SD —
3/8 x 1-3/4 3/8" — 50 7220SD —
3/8 x 2-1/2 3/8" 2-1/8" 50 7222SD —
3/8 x 3 3/8" 2-1/8" 50 7224SD —
3/8 x 4 3/8" 2-1/8" 50 7226SD 7726SD
3/8 x 5 3/8" 2-1/8" 50 7228SD 7728SD
3/8 x 6 3/8" 2-1/8" 50 7230SD 7730SD
1/2 x 2-1/2 1/2" — 50 7242SD —
1/2 x 3 1/2" 2-1/2" 50 7244SD —
1/2 x 4 1/2" 2-1/2" 50 7246SD 7745SD
1/2 x 5 1/2" 2-1/2" 25 7248SD 7748SD
1/2 x 6 1/2" 2-1/2" 25 7250SD 7750SD
1/2 x 6-1/2 1/2" 2-1/2" 25 7268SD 7751SD
1/2 x 8 1/2" 2-1/2" 25 7252SD 7752SD
Size
(Inch)
Wedge
Bit Dia.
Min.
Embed.
Std
Box
Carbon
Steel
Mechanically
Galvanized
5/8 x 3 5/8" 2-1/2" 25 7260SD —
5/8 x 4 5/8" 3-1/4" 25 7262SD —
5/8 x 5 5/8" 3-1/4" 25 7264SD 7764SD
5/8 x 6 5/8" 3-1/4" 25 7266SD 7766SD
5/8 x 6-1/2 5/8" 3-1/4" 50 — 7768SD
5/8 x 8 5/8" 3-1/4" 25 7270SD 7770SD
3/4 x 4 3/4" — 20 7282SD —
3/4 x 5 3/4" 4-1/4" 20 7284SD —
3/4 x 6 3/4" 4-1/4" 20 7286SD 7786SD
3/4 x 8 3/4" 4-1/4" 10 7288SD
3/4 X 8-1/2 3/4" 4-1/4" 20 — 7789SD
3/4 x 10 3/4" 4-1/4" 10 7290SD 7790SD
Anchor size includes the diameter and the length of the anchor measured under the head.
73
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SEISMIC / TENSION ZONE ANCHORS
Size Length Depth Part Number
5/8" x 6" 2-3/4" 3-1/8" DUC38-275L
5/8" x 6" 4-1/2" 3-1/8" DUC38-275LT
5/8" x 7-1/2" 4" 4-3/8" DUC38-400H
5/8" x 7-1/2" 5-3/4" 4-3/8" DUC38-400H
3/4" x 7-1/2" 4" 4-3/8" DUC12-400T
3/4" x 71/2" 5-3/4" 4-3/8" DUC12-400LT
3/4" x 8-1/2" 5" 5-3/8" DUC12-500T
3/4" x 8-1/2" 6-3/4" 5-3/8" DUC12-500HT
3/4" x 10-1/4" 6-3/4" 7-1/8" DUC12-675T
3/4" x 10-1/4" 8-1/2" 7-1/8" DUC12-675HT
1" x 8-3/8" 2-3/4" 5-1/8" DUC58-450L
1" x 8-3/8" 4-1/2" 5-1/8" DUC58-450LT
1" x 11-3/8" 4" 8-1/8" DUC38-750H
1" x 11-3/8" 4-1/2" 8-1/8" DUC38-750HT
1" x 7-1/2" 13" 9-5/8" DUC38-900H
1" x 7-1/2" 13" 9-5/8" DUC38-900HT
1-1/8" x 9" 5" 5" DUC34-500T
1-1/8" x 9" 6-3/4" 6-3/4" DUC34-500HT
1-1/8" x 14" 6-3/4" 10" DUC34-1000T
1-1/8" x 14" 8-1/2" 11-3/4" DUC34-1000HT
DUC Undercut Anchors
• Consists of a threaded stud, a thick walled expansion
sleeve, an expander coupling and a nut and washer.
• Installed into a pre-drilled hole created using the DUC
Undercutting Bit which fits into SDS or SDS-Max rotary
hammer drills and guarantees the correct angle of the
reverse cone.
• Installation is simple. No coring drills are necessary.
Creation of proper undercut is correctly done and
easily verified using DUC undercut bits. Part
Lock Release
Spanner Position
Lock Release Screw Stopper Sleeve
Cutter Blade Carbide Tip
Bow Jaw
Drilling Depth
UBC Series
Undercut Drill Bits
Undercutting bits fit into either SDS
or SDS-Max rotary hammer drills
and guarantees the correct angle of
the reverse cone. Creation of proper
undercut is correctly done and takes
only seconds.
Part Used Shank Drill Impact
No. w/ Anchors Dia. Type Depth Energy
UCB58 DUC38-275L 5/8" SDS 9" 1.6 ft-lbs.
DUC38-400H
UCB34 DUC12-400L 3/4" SDS 10-1/4" 2.5 ft.-lbs.
DUC12-500H
UCB100 DUC58-450L
DUC58-750H 1" SDS 12-1/4" 3.2 ft.-lbs.
DUC -58-900H
UCB118 DUC34-500L 1-1/8" SDS-Max 13-1/2" 4.0 Ft.-lbs.
DUC34-1000H
UCB118L DUC34-500L 1-1/8" SDS-MAx 29-1/2" 4.0 ft.-lbs.
DUC34-1000H
Hilti® Equivalents:
DUC Undercut Anchor: Compare
to HDA Undercut Anchors
Atomic
Undercut™ Anchors
Arriving Fall of 2010
Undercutting anchor for top
performance in cracked and
uncracked concrete
Size Part No.
3/8" x 6" 03100SD
3/8" x 6" ET 03102SD
3/8" x 7-1/4 03104SD
3/8" x 7-1/4" ET 03106SD
1/2" x 7-1/8" 03108SD
1/2" x 7-1/8" ET 03110SD
1/2" x 8-3/8" 03112SD
1/2" x 8-3/8" ET 03114SD
1/2" x 10-1/8" 03116SD
1/2" x 10-1/8" ET 03118SD
Size Part No.
5/8" x 8" 03120SD
5/8" x 8" ET 03122SD
5/8" x 11 03124SD
5/8" x 11" ET 03126SD
5/8" x 12-1/2" 03128SD
5/8" x 12-1/2" ET 03130SD
3/4" x 8-1/2" 03132SD
3/4" x 8-1/2" ET 03134SD
3/4" x 13-1/2" 03116SD
3/4" x 3-1/2" ET 03118SD
74 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SEISMIC / TENSION ZONE - ADHESIVE ANCHORS
COMPARE TO: Red Head A7 and Hilti® HY150 MAX:
AC100+ Gold Epoxy Acrylate
Vinylester Injection Adhesive Anchoring System
The AC100+ Gold is a two-component adhesive anchoring
system. System includes injection adhesive cartridges, mix-
ing nozzles, dispensing tools and hole cleaning equipment.
The AC100+ Gold is designed for bonding threaded rod
and reinforcing bar hardware into drilled holes in concrete
base materials.
Part No. Description Box
8462SD AC100+ Gold 5 fl. oz. Push Pack 12
8478SD AC100+ Gold 10 fl. oz. Quik-Shot 12
8480SD AC100+ Gold 8 fl. oz. dual cartridge —
8486SD AC100+ Gold 12 fl. oz. dual cartridge —
8490SD AC100+ Gold 29 fl. oz. dual cartridge —
One AC100+ Gold mixing nozzle is packaged with each cartridge.
AC100+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Accessories
Cartridge System Mixing Nozzles
Part No. Description Box
08293 Extra Mixing Nozzle for AC100+ Gold
(5 oz., 8 oz., 10 oz. and 12 oz. 2
08294 Extra Mixing Nozzle with (8" extension)
for AC100+ Gold 29 oz. 2
08281 Mixing Nozzle extension, 8" 2
Accessories
Dispensing Tools for Injection Adhesion
Part No. Description Box
08437 Manual caulking gun for Push-Pak
and Quik-Shot 1
08479 High Performance caulking gun for
Push-Pak and Quik-Shot 1
08484 AC100+ Gold standard all-metal
manual tool 1
08485 AC100+ Gold 8 oz., 10 oz., & 12 oz.
high performance manual tool 1
08485SD AC100+ Gold 8 oz., 10 oz., & 12 oz.
standard all-metal manual tool 1
08494 AC100+ Gold 29 oz. standard
all-metal manual tool 1
08495 AC100+ Gold 29 oz.
high performance manual tool 1
Pneumatic Injection Tool Delivery System
Part No. Description Box
08496 29 oz. High Performance
Pneumatic Tool 1
Battery Injection Dispensing Tool
Part No. Description Box
08444 29 oz. High Performance Battery Tool 1
08437
08479
08484
08494
08495
Powers Hole Cleaning Tools & Accessories
Wire Brushes
Adapters & Extensions
Part No. Description
Wire Brushes
08284 for 7/16" ANSI Hole (3/8" rod or #3 Rebar)
08285 for 9/16" ANSI Hole (1/2" rod or #4 Rebar)
08286 for 11/16" ANSI Hole (5/8" rod or #5 Rebar)
08287 for 7/8" ANSI Hole (3/4" rod or #6 Rebar)
08288 for 1" ANSI Hole (7/8" rod or #7 Rebar)
08289 for 1-1/8" ANSI Hole (1" rod or #8 Rebar)
08290 for 1-3/8" ANSI Hole (1-1/4" rod or #9 Rebar)
08291 for 1-1/2" ANSI Hole (#10 Rebar)
Part No. Description
Wire Brushes
08283 SDS-Plus adapter for steel brushes
08296 Standard drill adapter for steel brushes
08282 Steel brush extension, 12"
08280 Hand pump/dust blower
08292 Air compressor nozzle with extension
Please see page 98 for more
Adhesive Anchors Accessories
75
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SEISMIC / TENSION ZONE - ADHESIVE ANCHORING
BASE MATERIAL WORKING FULL
(F°/C°) TIME CURE TIME
110°/ 43° 9 minutes 24 hours
90°/ 32° 9 minutes 24 hours
70°/ 20° 15 minutes 24 hours
50°/ 10° 15 minutes 24 hours
G5 Epoxy Adhesive
• 24 hour cure time at 70° F
• Fire Rated: tested up to 4 hours
Fire Resistance Period
• High Strength Epoxy
• Works in dry, damp, saturated, and
underwater applications
• Odorless
• Oversized and cored holes
• Resists wind loads
Red Head G5 22 fl. oz. Cartridge & Accessories
Part No. Description
G5-22 22 fl.oz. Cartridge, G5
E55 Mixing Nozzle for G5-22. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
E102 Hand Dispenser for G5-22
E202 Pneumatic Dispenser for G5-22
EPCON G5 Epoxy Adhesive
Ordering Information
E102 Hand Dispenser
E202 Pneumatic Dispenser
E55 Mixing Nozzle
Meets "Buy American" provision in
Stimulus Bill Section 1605
PE1000+ Epoxy
Epoxy Injection Adhesive
Anchoring System
The PE1000+ is a two-component, high
strength adhesive anchoring system.
The system includes injection adhesive
cartridges, mixing nozzles, dispensing
tools and hole cleaning equipment.
The PE1000+ is designed for bond-
ing threaded rod and reinforcing bar
hardware into drilled holes in concrete
base materials.
Part No. Description Box
0500SD PE1000+ 13 fl. oz. dual cartridge 12
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Accessories
Part No. Description Box
08294 Extra Mixing Nozzle with (8" extension) 2
08281 Mixing Nozzle extension, 8" 2
08295 PE1000+ Heavy Duty dispensing tool 1
COMPARE TO: Red Head C6
and Hilti® RE500 SD:
Nylon Brushes
• Proper hole cleaning using
a brush is essential for
optimum performance.
Part Size Std
No. Dia. Box
B012 1/2" 1
B034 3/4" 1
B100 1" 1
B114 1-1/4" 1
B112 1-1/2" 1
Wire Brushes
• Brushes may be used on up
to 50 holes, depending on
concrete strength.
• Brushes required for installation of #4, #8 and larger
rebar are available.
Part Anchor Drill Bit Brush Std
No. Dia. Rebar Dia. Dia Box
SB038 3/8" #3 7/16" 5/8" 4
SB012 1/2" – 9/16" 3/4" 4
SB058 5/8" #5 3/4" 1" 4
SB034 3/4" #6 7/8" 1-1/4" 4
SB078 7/8" – 1" 1-1/2" 4
SB010 1" #7 1-1/8" 1-5/8" 4
SB125 1-1/4" – 1-3/8" 1-3/4" 4
ESDS-38 12" Extension w/ SDS+ Adapter 1
EHAN-38 12" Extension w/ T-Handle 1
Hole Plugs
• Easier overhead
installations,
centers rod
in hole, keeps
adhesive off of
threads.
Part Rod Hole Std
No. Dia. Dia Box
E038 3/8" 7/16" 25
E012 1/2" 9/16" 25
E058 5/8" 3/4" 20
E034 3/4" 7/8" 20
E078 7/8" 1" 10
E010 1" 1-1/8" 10
E114 1-1/4" 1-3/8" 10
Hand Pump
BP-10
Red Head Hole Cleaning Tools & Accessories
76 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
EPOXY / ADHESIVE ANCHORING
Hammer-Capsule®
Drive-In Type Capsule Adhesive
Base Material: Solid Concrete
Size Range: 3/8" to 1" anchor rod.
Anchor Material: Ester Based Resin
Part Rod Drill Std. Std.
No. Size Dia. Length Box Box
6702 3/8" 7/16" 3-1/2" 10 500
6703 1/2" 9/16" 4-1/4" 10 200
6704 5/8" 11/16" 5" 10 100
6705 3/4" 7/8" 6-5/8" 5 50
6706 7/8" 1" 7" 5 50
6707 1" 1-1/8" 8-1/4" 5 50
Chem-Stud™
Spin-In Type Capsule Adhesive
Base Material: Solid Concrete
Size Range: 3/8" to 1-1/4" anchor rod.
Anchor Material: Ester Based Resin
Part Rod Drill Std. Std.
No. Size Dia. Length Box Box
6502 3/8" 7/16" 3-1/2" 10 500
6503 1/2" 9/16" 4-1/4" 10 200
6504 5/8" 11/16" 5" 10 200
6505 3/4" 7/8" 6-5/8" 5 50
6506 7/8" 1" 7" 5 50
6507 1" 1-1/8" 8-1/4" 5 50
6508 1-1/4" 1-1/2" 10-1/4" 5 25
Chem-Stud Installation Tools
Chem-Stud installation tools consist of a drive adapter which
is designed to fit the rotary hammer drill used and a coupler
to hold either threaded rods or reinforcing bars. The tools for
threaded rod and reinforcing bars are different and can not
be interchanged.
Part Std. Std.
No. Size Box Carton
6562 3/8" 1 10
6563 1/2" 1 10
6564 5/8" 1 10
6565 3/4" 1 5
6566 7/8" 1 5
6567 1" 1 5
6568 1-1/4" 1 5
Couplers for Threaded Rod
Part Hex Fits Std. Std.
No. Size Coupler Size Box Carton
6570 1/4" 3/8" to 5/8" 1 10
6572 3/8" 3/4" to 1-1/4" 1 10
Drivers for Threaded Rod Couplers - Hex
Part Hex Fits Std. Std.
No. Size Coupler Size Box Carton
6574 1/4" 3/8" to 5/8" 1 10
6576 3/8" 3/4" to 1-1/4" 1 10
Drivers for Threaded Rod Couplers - SDS Plus
Part Hex Fits Std. Std.
No. Size Coupler Size Box Carton
6580 1/4" 3/8" to 5/8" 1 10
6582 3/8" 3/4" to 1-1/4" 1 10
Drivers for Threaded Rod Couplers - Spline
Part Hex Fits Std. Std.
No. Size Coupler Size Box Carton
6559 1/4" 3/8" to 5/8" 1 10
6561 3/8" 3/4" to 1-1/4" 1 10
Drivers for Threaded Rod Couplers - SDS Max
Umbrella Anchor
Internally
Threaded Insert
Umbrella Inserts
For fastening to the front face of hollow base materials.
Part No. Description Pkg
HBU-38 Umbrella Insert w/Centering Ring 20
HBU-FS Umbrella Insert w/Centering Ring 10
w/ 3/8" Internally Threaded Insert
Nylon Screen Tubes Stainless Steel Screen Tubes
Rod Screen S. Steel Nylon
Dia. Length P/N Box P/N Box
1/4" 6" HB 14-6 100 — —
1/4" 8" HB 14-8 100 — —
1/4" 10" HB 14-10 100 — —
3/8" 6" HB 38-6 50 HBP 38-6 50
3/8" 8" HB 38-8 25 HBP 38-8 25
3/8" 10" HB 38-10 25 HBP 38-10 25
1/2" 6" HB 12-6 50 HBP 12-6 50
1/2" 8" HB 12-8 25 HBP 12-8 25
1/2" 10" HB 12-10 25 HBP 12-10 25
5/8" 6" HB 58-6 25 HBP 58-6 40
5/8" 8" HB 58-8 20 HBP 58-8 40
5/8" 10" HB 58-10 20 HBP 58-10 40
3/4" 8" HB 34-8 20 — —
3/4" 10" HB 34-10 10 HBP 34-10 20
3/4" 13" HB 34-13 10 HBP 34-13 20
Screen Tubes
Screens make it possible to use adhesive for fastening to
hollow block or brick walls. Nylon screens offer 30-50%
lower costs than stainless steel. Their special design makes
them easier to insert through brick or block. Nylon screens
also resist bending and crushing. Both Nylon and Stainless
Steel screens are corrosion resistant.
Epoxy Accessories / Inserts & Tubes
77
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACRYLIC ADHESIVE ANCHORING
EPCON A7 Acrylic Adhesive
Fast Dispensing, Fast Curing From 0°F to 120°F
The acrylic resin and hardening agent are completely
mixed as they are simultaneously dispensed from the dual cartridge through a static
mixing nozzle, directly into the anchor hole. A7 can be used with threaded rod or rebar.
• All weather formula, down
to 0°F & below
• No drip, no sag, easy cleanup
• Fast and easy dispensing
• Fast curing times
• Not mix ratio sensitive for
maximum consistency
• Rods are easier to insert
into the hole with A7 com-
pared with other adhesives
• Works in damp holes and underwater applications
• Requires less adhesive — can be used in 1/16" and 1/8" oversized holes
• One formula for both hollow and solid base materials
• NSF 61 approved.
Red Head A7 10 fl. oz. Cartridge & Accessories
Part No. Description
A7-10 10 fl.oz. Cartridge (includes nozzle)
A24 Mixing Nozzle for A7-10. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
A100 Hand Dispenser for A7-10
Red Head A7 5 fl. oz. Cartridge & Accessories
Part No. Description
A7-5 5 fl.oz. Cartridge
A500 Reusable plastic dispenser
A501 Reusable caulking gun adapter
A500 Kit Dispensing Kit (incl. (1) A7-5 cartridge, (1)
A500 Dispenser, & (1) A24 Nozzle
A501 Kit Dispensing Kit (incl. (1) A7-5 cartridge, (1)
A501 caulking gun adapter, & (1) A24
Nozzle
EPCON A7 Acrylic Adhesive Ordering Information
A24 Mixing Nozzle
A24 Mixing Nozzle
A7 10 fl. oz. cartridge
A100 Hand Dispenser
A7 5 fl. oz. cartridge A500 Reusable
Plastic Dispenser
A501 Reusable
Caulking Gun Adapter
BASE MATERIAL WORKING FULL CURE
TEMP. (F°/C°) TIME (MIN) TIME (MIN)
100°/38° 5 25
80°/27° 5.5 30
60°/16° 7 35
40°/4° 15 75
20°/-7° 35 6 (hrs)
0°/-18° 4 (hrs) 24 (hrs)
Red Head A7 8 fl. oz. Cartridge & Accessories
Part No. Description
A7-8 8 fl.oz. Cartridge
A24 Mixing Nozzle for A7-8. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
A101 Heavy Duty Hand Dispenser for A7-8
A7 8 fl. oz. cartridge
A101 Heavy Duty
Hand Dispenser
A24 Mixing Nozzle
Red Head A7 28 fl. oz. Cartridge & Accessories
Part No. Description
A7-28 28 fl.oz. Cartridge, A7
E55 Mixing Nozzle for A7-28. Nozzle dia.
3/8" to 5/8". Overall length:17"
A102 Hand Dispenser for A7-28
A200 Pneumatic Dispenser for A7-28 cartridge
A7 28 fl. oz. cartridge A102 Hand Dispenser
A200 Pneumatic
Dispenser
E55 Mixing Nozzle
Hilti® Equivalents:
A7: Compare to HIT-HY 150
and HIT-ICE Adhesive
78 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
"PURE" EPOXY / ADHESIVE ANCHORING
EPCON C6
Epoxy Adhesive
Always Works — Even
Under The Most Severe
Installation Conditions
The acrylic resin and hardening
agent are completely mixed as
they are simultaneously dispensed
from the dual cartridge through a
static mixing nozzle, directly into the
anchor hole. C6 can be used with
threaded rod or rebar.
• 1 hour cure time (see chart)
• Works in damp holes and under-
water applications
• Minimum shrinkage — can be
used in oversized holes & dia-
mond cored holes
• High heat deflection temperature: 140°F (ASTM D648)
• One formula for both solid and hollow base materials
• NSF standard 61 certified for drinking water systems
• Extensively tested — earthquake, underwater, creep,
freeze-thaw, radiation, fire, fatigue, electrical isola-
tion, ozone and many more.
• Extensive use — Used on projects all over the world
for almost 20 years.
EMBEDMENT DEPTH (IN.)
2 4 6 8
#3 7/16 331.3 165.6 110.4 82.8
#4 5/8 186.5 93.2 62.2 46.6
#5 3/4 143.0 71.5 47.7 35.8
#6 7/8 115.5 57.7 38.5 28.8
#7 1 106.7 53.3 35.6 26.7
#8 1-1/8 88.6 44.3 29.5 22.2
#9 1-1/4 51.4 25.7 17.1 12.8
#10 1-1/2 42.0 21.0 14.0 10.5
REBAR
DRILL HOLE
DIA. (IN.)
A7 Acrylic Adhesive
28 ounce Cartridge
*The number of anchoring installations is based upon calculations of hole volumes using
ANSI tolerance carbide tipped drill bits, the nominal areas of the reinforcing bars and
the stress areas of the threaded rods. These estimates do not account for waste.
EMBEDMENT DEPTH (IN.)
2 4 6 8
#3 7/16 331.3 165.6 110.4 82.8
#4 5/8 186.5 93.2 62.2 46.6
#5 3/4 143.0 71.5 47.7 35.8
#6 7/8 115.5 57.7 38.5 28.8
#7 1 106.7 53.3 35.6 26.7
#8 1-1/8 88.6 44.3 29.5 22.2
REBAR
DRILL HOLE
DIA. (IN.)
C6 Epoxy Adhesive
18 ounce Cartridge
Reinforceing Bar in Solid Concrete
Number of Anchoring Installations per Cartridge*
EMBEDMENT DEPTH (IN.)
2 4 6 8
1/4 5/16 457.7 228.9 152.8 114.4
3/8 7/16 265.0 132.5 88.3 66.3
1/2 9/16 190.7 95.4 63.6 47.7
5/8 3/4 97.8 48.8 32.5 24.4
3/4 7/8 77.2 38.6 25.7 19.3
7/8 1 64.0 32.0 21.4 16.0
1 1-1/8 52.6 26.3 17.6 13.2
ROD
DRILL HOLE
DIA. (IN.)
A7 Acrylic Adhesive
28 ounce Cartridge
EMBEDMENT DEPTH (IN.)
2 4 6 8
1/4 7/16 293.7 146.8 97.9 73.4
3/8 5/8 170.0 85.0 56.7 42.5
1/2 3/4 122.4 61.2 40.8 30.6
5/8 7/8 62.6 31.3 20.9 15.7
3/4 1 49.5 24.8 16.5 12.4
7/8 1-1/8 41.0 20.5 13.7 10.3
ROD
DRILL HOLE
DIA. (IN.)
C6 Epoxy Adhesive
18 ounce Cartridge
Threaded Rod in Solid Concrete
BASE MATERIAL WORKING FULL CURE
TEMP. (F°/C°) TIME (MIN) TIME (HRS)
120°/49° 4 1
90°/32° 5 1
70°/20° 7 1
60°/16° 10 2
50°/-7° 20 24
40°/-18° 45 32
EPCON C6 Epoxy Adhesive
Ordering Information
Red Head C6 18 fl. oz. Cartridge & Accessories
Part No. Description
C6-18 18 fl.oz. Cartridge, C6
E24XL Mixing Nozzle for C6-18. Nozzle dia.
1/2" (outside dia.) Overall length:10-3/8"
E24 Mixing Nozzle for C6-18. Nozzle dia.
3/8" (outside dia.)
E102 Hand Dispenser for C6-18
E200 Pneumatic Dispenser for C6-18
C6 18 fl. oz. cartridge
E24XL 1/2" dia. Mixing Nozzle
E102 Hand Dispenser
E200 Pneumatic Dispenser
Hilti® Equivalents:
C6: Compare to
RE500 Adhesive
79
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
"PURE" EPOXY / ADHESIVE ANCHORING
BASE MATERIAL WORKING FULL
(F°/C°) TIME CURE TIME
110°/ 43° 9 minutes 24 hours
90°/ 32° 9 minutes 24 hours
70°/ 20° 15 minutes 24 hours
50°/ 10° 15 minutes 24 hours
G5 Epoxy Adhesive
• 24 hour cure time at 70° F
• Fire Rated: tested up to 4 hours
Fire Resistance Period
• High Strength Epoxy
• Solid base materials
• Works in dry, damp, saturated, and
underwater applications
• Gives more time to install anchors
• Easier to install anchors in hot
weather
• Odorless
• Oversized and cored holes
• Improved wet/water filled
• Resists wind loads
Red Head G5 22 fl. oz. Cartridge & Accessories
Part No. Description
G5-22 22 fl.oz. Cartridge, G5
E55 Mixing Nozzle for G5-22. Nozzle dia.
3/8" to 5/8". Overall length:6-3/8"
E102 Hand Dispenser for G5-22
E202 Pneumatic Dispenser for G5-22
EPCON G5 Epoxy Adhesive
Ordering Information
E102 Hand Dispenser
E202 Pneumatic Dispenser
E55 Mixing Nozzle
Meets "Buy American" provision in
Stimulus Bill Section 1605
EMBEDMENT DEPTH (IN.)
2 4 6 8
#3 7/16 194.5 97.2 64.8 48.6
#4 5/8 146.9 73.5 49.0 36.7
#5 3/4 112.7 56.3 37.6 28.2
#6 7/8 91.0 45.5 30.3 22.7
#7 1 43.6 21.8 14.5 10.9
#8 1-1/8 38.8 19.4 12.9 9.7
#9 1-1/4 40.5 20.2 13.5 10.1
#10 1-1/2 33.1 16.6 11.0 8.3
REBAR
DRILL HOLE
DIA. (IN.)
G5 Epoxy Adhesive
22 ounce Cartridge
*The number of anchoring
installations is based
upon calculations of hole
volumes using ANSI toler-
ance carbide tipped drill
bits, the nominal areas
of the reinforcing bars
and the stress areas of
the threaded rods. These
estimates do not account
for waste.
Rebar in Solid Concrete
Number of Anchoring Installations per Cartridge*
EMBEDMENT DEPTH (IN.)
2 4 6 8
1/4 5/16 360.6 180.3 120.2 90.2
3/8 7/16 208.8 104.4 69.6 52.2
1/2 9/16 150.3 75.1 50.1 37.6
5/8 3/4 76.9 38.4 25.6 19.2
3/4 7/8 60.8 30.4 20.3 15.2
7/8 1 50.5 25.2 16.8 12.6
1 1-1/8 41.5 20.7 13.8 10.4
ROD
DRILL HOLE
DIA. (IN.)
G5 Epoxy Adhesive
22 ounce Cartridge
Rod in Solid Concrete
Hole Cleaning Tools & Accessories
Hole Plugs
• Easier overhead
installations, centers
rod in hole, keeps ad-
hesive off of threads.
Part Rod Hole Std
No. Dia. Dia Box
E038 3/8" 7/16" 25
E012 1/2" 9/16" 25
E058 5/8" 3/4" 20
E034 3/4" 7/8" 20
E078 7/8" 1" 10
E010 1" 1-1/8" 10
E114 1-1/4" 1-3/8" 10
Nylon Brushes
• Proper hole cleaning using
a brush is essential for
optimum performance.
Part Size Std
No. Dia. Box
B012 1/2" 1
B034 3/4" 1
B100 1" 1
B114 1-1/4" 1
B112 1-1/2" 1
Wire Brushes
• Brushes may be used on up
to 50 holes, depending on
concrete strength.
• Brushes required for installation of #4, #8 and larger
rebar are available.
Part Anchor Drill Bit Brush Std
No. Dia. Rebar Dia. Dia Box
SB038 3/8" #3 7/16" 5/8" 4
SB012 1/2" – 9/16" 3/4" 4
SB058 5/8" #5 3/4" 1" 4
SB034 3/4" #6 7/8" 1-1/4" 4
SB078 7/8" – 1" 1-1/2" 4
SB010 1" #7 1-1/8" 1-5/8" 4
SB125 1-1/4" – 1-3/8" 1-3/4" 4
ESDS-38 12" Extension w/ SDS+ Adapter 1
EHAN-38 12" Extension w/ T-Handle 1
Hand Pump
BP-10
80 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
"PURE" EPOXY / ADHESIVE ANCHORING
COMPARE TO: Red Head C6 & Hilti RE500SD:
PE1000+ Epoxy
Epoxy Injection Adhesive
Anchoring System
The PE1000+ is a two-component, high
strength adhesive anchoring system.
The system includes injection adhesive
cartridges, mixing nozzles, dispensing
tools and hole cleaning equipment.
The PE1000+ is designed for bond-
ing threaded rod and reinforcing bar
hardware into drilled holes in concrete
base materials.
Part No. Description Box
0500SD PE1000+ 13 fl. oz. dual cartridge 12
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Accessories
Part No. Description Box
08294 Extra Mixing Nozzle with (8" extension) 2
08281 Mixing Nozzle extension, 8" 2
08295 PE1000+ Heavy Duty dispensing tool 1
COMPARE TO: Red Head A7 & Hilti HY150 MAX
AC100+ Gold
Epoxy Acrylate
The AC100+ Gold is a two-compo-
nent adhesive anchoring system.
The system includes injection ad-
hesive in plastic cartridges, mixing
nozzles, dispensing tools and hole
cleaning equipment. The AC100+
Gold is designed for bonding
threaded rod and reinforcing
bar hardware into drilled holes in
concrete base materials.
Part No. Description Box
8462SD AC100+ Gold 5 fl. oz. Push Pack 12
8478SD AC100+ Gold 10 fl. oz. Quik-Shot 12
8480SD AC100+ Gold 8 fl. oz. dual cartridge —
8486SD AC100+ Gold 12 fl. oz. dual cartridge —
8490SD AC100+ Gold 29 fl. oz. dual cartridge —
One AC100+ Gold mixing nozzle is packaged with each cartridge.
AC100+ mixing nozzles must be used to ensure complete and
proper mixing of the adhesive.
Accessories
Cartridge System Mixing Nozzles
Part No. Description Box
08293 Extra Mixing Nozzle for AC100+ Gold
(5 oz., 8 oz., 10 oz. and 12 oz. 2
08294 Extra Mixing Nozzle with (8" extension)
for AC100+ Gold 29 oz. 2
08281 Mixing Nozzle extension, 8" 2
Accessories
Dispensing Tools for Injection Adhesion
Part No. Description Box
08437 Manual caulking gun for Push-Pak
and Quik-Shot 1
08479 High Performance caulking gun for
Push-Pak and Quik-Shot 1
08484 AC100+ Gold manual tool 1
08485 AC100+ Gold 8 oz., 10 oz., & 12 oz.
high performance manual tool 1
08485SD AC100+ Gold 8 oz., 10 oz., & 12 oz.
standard all-metal manual tool 1
08494 AC100+ Gold 29 oz. manual tool 1
08495 AC100+ Gold 29 oz.
high performance manual tool 1
Pneumatic Injection Tool Delivery System
Part No. Description Box
08493 Pneumatic Tool for 29 oz. AC100+ 1
Battery Injection Dispensing Tool
Part No. Description Box
08444 Battery Tool for 29 oz. AC100+ 1
Powers Hole Cleaning Tools & Accessories
Part No. Description
Wire Brushes
08284 for 7/16" ANSI Hole (3/8" rod or #3 Rebar)
08285 for 9/16" ANSI Hole (1/2" rod or #4 Rebar)
08286 for 11/16" ANSI Hole (5/8" rod or #5 Rebar)
08287 for 7/8" ANSI Hole (3/4" rod or #6 Rebar)
08288 for 1" ANSI Hole (7/8" rod or #7 Rebar)
08289 for 1-1/8" ANSI Hole (1" rod or #8 Rebar)
08290 for 1-3/8" ANSI Hole (1-1/4" rod or #9 Rebar)
08291 for 1-1/2" ANSI Hole (#10 Rebar)
08283 SDS-Plus adapter for steel brushes
08296 Standard drill adapter for steel brushes
08282 Steel brush extension, 12"
08280 Hand pump/dust blower
08292 Air compressor nozzle with extension
Wire Brushes
Adapters & Extensions
Hand Pump/Blower
81
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADED ROD & SQUARE PLATE WASHERS (FOR EPOXY ANCHORS)
Part No. Description
8139 TriggerFoam™ Plastic Gun
8138 TriggerFoam™ Heavy Duty Gun
8140 TriggerFoam™ Metal Gun
8142 TriggerFoam™ Cleaner 20 ounce
8137 TriggerFoam™ Subfloor Gun, 22"
TriggerFoam™ Accessories
Powerfoam™/TriggerFoam™
Expanding Polyurethane Foam
One-part polyurethane expanding foams. Their exceptional
ability to bond allows Powerfoam and TriggerFoam to be
applied to various building elements including the surfaces
of concrete, brick, block, wood, steel, aluminum and other
metals. Neutral odor.
Part No. Description
8130 Powerfoam™, 12 ounce
8132 Powerfoam™, 29 ounce
8130 TriggerFoam™, 29 ounce
SDS Shank Carbide Tipped Bits
Fully Threaded
(Measured End to End) • (By request)
Chisel Point
Square Plate
Washers
• For use with cast in place
anchor stud assemblies
` Part No. Nominal ID Square Thick
37DFIP/1/4 x 2 x 2 3/8 2 1/4
37DFIP/1/4 x 3 x 3 3/8 3 1/4
37DFIP/1/4 x 4 x 4 3/8 4 1/4
50DFIP/1/4 x 3 x 3 1/2 3 1/4
50DFIP/1/4 x 4 x 4 1/2 4 1/4
62DFIP/1/4 x 3 x 3 5/8 3 1/4
62DFIP/1/4 x 4 x 4 5/8 4 1/4
62DFIP/3/8 x 3 x 3 5/8 3 3/8
75DFIP/1/4 x 3 x 3 3/4 3 1/4
75DFIP/1/4 x 4 x 4 3/4 4 1/4
87DFIP/1/4 x 3 x 3 7/8 3 1/4
87DFIP/1/4 x 4 x 4 7/8 4 1/4
1DFIP/1/4 x 4 x 4 1 4 1/4
Plate Washer
Ordering
Specify:
• Rod Size
•Overall Length
•Hole Inside Diameter
•Plate Thickness
•Square Size
Stud Ordering
Specify:
• Rod Size = D
•Overall Length = L
Measurements
• Up to 25% Faster Drilling
• Easier Centering
• For Concrete, Masonry, Brick and Block
Part No. Bit Size
48-20-7400 5/32 x 2 x 4
48-20-7401 5/32 x 4 x 6
48-20-7410 3/16 x 2 x 4
48-20-7411 3/16 x 4 x 6
48-20-7412 3/16 x 6 x 8
48-20-7413 3/16 x 8 x 10
48-20-7414 3/16 x 10 x 12
48-20-7415 3/16 x 12 x 14
48-20-7416 3/16 x 14 x 16
48-20-7421 7/32 x 4 x 6
48-20-7422 7/32 x 6 x 8
48-20-7424 7/32 x 9 x 11
48-20-7425 7/32 x 12 x 14
48-20-7426 7/32 x 14 x 16
48-20-7430 1/4 x 2 x 4
48-20-7431 1/4 x 4 x 6
48-20-7432 1/4 x 6 x 8
48-20-7434 1/4 x 9 x 11
48-20-7435 1/4 x 12 x14
48-20-7436 1/4 x 14 x 16
48-20-7438 1/4 x 18 x 20
48-20-7441 5/16 x 4 x 6
48-20-7444 5/16 x 10 x 12
Part No. Bit Size
48-20-7451 3/8 x 4 x 6
48-20-7452 3/8 x 6 x 8
48-20-7453 3/8 x 8 x 10
48-20-7454 3/8 x 10 x 12
48-20-7457 3/8 x 16 x 18
48-20-7459 3/8 x 22 x 24
48-20-7461 7/16 x 4 x 6
48-20-7464 7/16 x 10 x 12
48-20-7467 7/16 x 16 x 18
48-20-7471 1/2 x 4 x 6
48-20-7473 1/2 x 8 x 10
48-20-7474 1/2 x 10 x 12
48-20-7477 1/2 x 16 x 18
48-20-7479 1/2 x 22 x 24
48-20-7481 9/16 x 4 x 6
48-20-7484 9/16 x 10 x 12
48-20-7487 9/16 x 16 x 18
48-20-7601 5/8 x 4 x 6
48-20-7602 5/8 x 6 x 8
48-20-7604 5/8 x 10 x 12
48-20-7607 5/8 x 16 x 18
48-20-7609 5/8 x 22 x 24
8140 Metal
TriggerFoam™ Gun
8139 Plastic
TriggerFoam™
Gun
8142 Trigger-
Foam™ Cleaner
20 ounce
82 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Power-Stud™ Wedge Anchors
The Power-Stud anchor, formerly known as the Rawl-Stud, is
a fully threaded, torque-controlled, wedge expansion anchor.
Head Styles:
Threaded Hex Nut, Rod Hanger, Tie Wire
Anchor Materials:
Mechanically Galvanized Carbon Steel, Type 304 Stainless
Steel, Type 316 Stainless Steel
Size Range:
¼" dia. x 1¾" L. to 1" dia. x 12" L.
Suitable Base Materials:
Normal weight and structural lightweight concrete,
Grouted concrete masonry
POWERS® WEDGE ANCHORS
Part Anchor Size Thread Minimum Std.
Number (Drill Dia.) Depth Embed Box
7806 1/2" x 2-3/8" 9/16" 2-1/4" 50
Rod Hanger, Power-Stud®
for 3/8" Rod Hanging Applications
Part Anchor Size Tie-Wire Minimum Std.
No. (Drill Dia.) Hole Embed Box
7409 1/4" x 2" 9/32" 2-1/4" 50
Tie-Wire Power-Stud™
Hilti® Equivalents:
Power-Stud™: Compare to Kwik
Bolt 3 Anchors
Anchor Size Thread Minimum Std. Mechanically Stainless Stainless
(Drill Dia.) Length Embedment Box Galvanized Steel 304 Steel 316
1/4" x 1-3/4" 3/4" 1-1/8" 100 — 7300 7600
1/4" x 2-1/4" 1-1/4" 1-1/8" 100 — 7302 7602
1/4" x 3-1/4" 2-1/4" 1-1/8" 100 — 7304 7604
3/8" x 2-1/4" 1-1/4" 1-5/8" 50 — 7310 7610
3/8" x 2-3/4" 1-5/8" 1-5/8" 50 — 7312 7612
3/8" x 3" 1-7/8" 1-5/8" 50 — 7313 7613
3/8" x 3-1/2" 2-3/8" 1-5/8" 50 — 7314 7614
3/8" x 3-3/4" 2-5/8" 1-5/8" 50 — 7315 7615
3/8" x 5" 3-7/8" 1-5/8" 50 — 7316 7616
1/2" x 2-3/4" 1-3/8" 2-1/4" 50 7720 7320 7620
1/2" x 3-3/4" 2-3/8" 2-1/4" 50 — 7322 7622
1/2" x 4-1/2" 3-1/8" 2-1/4" 50 7723 7323 7623
1/2" x 5-1/2" 4-1/8" 2-1/4" 50 7724 7324 7624
1/2" x 7" 5-5/8" 2-1/4" 25 7726 7326 7626
5/8" x 3-1/2" 2" 2-3/4" 25 7730 7330 7630
5/8" x 4-1/2" 3" 2-3/4" 25 — 7332 7632
5/8" x 5" 3-1/2" 2-3/4" 25 — 7333 7633
5/8" x 6" 4-1/2" 2-3/4" 25 7734 7334 7634
5/8" x 7" 5-1/2" 2-3/4" 25 — 7336 7636
5/8" x 8-1/2" 7" 2-3/4" 25 — 7338 7638
3/4" x 4-1/4" 2-3/8" 3-3/8" 20 7340 7640
3/4" x 4-3/4" 2-7/8" 3-3/8" 20 7741 7341 7641
3/4" x 5-1/2" 3-5/8" 3-3/8" 20 7742 7342 7642
3/4" x 6-1/4" 4-3/8" 3-3/8" 20 — 7344 7644
3/4" x 7" 5-1/8" 3-3/8" 20 — 7346 7646
3/4" x 8-1/2" 6-5/8" 3-3/8" 10 7748 7348 7648
3/4" x 10" 8-1/8" 3-3/8" 10 — 7349 —
7/8" x 6" 2-3/4" 3-7/8" 10 7750 — —
7/8" x 8" 4-3/4" 3-7/8" 10 7752 7352 —
1" x 6" 2-3/8" 4-1/2" 10 — 7361 —
1" x 9" 5-3/8" 4-1/2" 10 7763 7363 —
1" x 12" 8-3/8' 4-1/2" 5 — 7365 —
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting length.
83
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RED HEAD® WEDGE ANCHORS
Anchor Thread Max. Fixture Min. Std. Zinc Plated Galvanized 304 316
Size Length Thickness Embed. Box Steel Steel Stainless Stainless
1/4-20 x 1-3/4" 3/4" 3/8" 1-1/8" 100 WS-1416 — WW-1416 —
1/4-20 x 2-1/4" 1-1/4" 7/8" 1-1/8" 100 WS-1422 — WW-1422 SWW-1422
1/4-20 x 3-1/4" 2-1/4" 1-1/8" 1-1/8" 100 — — — SWW-1432
1/4-20 x 3-1/4" 2-1/4" 1-7/8" 1-1/8" 100 WS-1432 — WW-1432 —
3/8"-16 x 2-1/4" 1-1/8" 3/8" 1-1/2" 50 WS-3822 — WW-3822 SWW-3822
3/8"-16 x 2-3/4" 1-5/8" 7/8" 1-1/2" 50 WS-3826 — WW-3826 SWW-3826
3/8"-16 x 3" 1-3/4" 1/8" 1-1/2" 50 WS-3830 — WW-3830 SWW-3830
3/8"-16 x 3-3/4" 2-1/2" 1-7/8" 1-1/2" 50 WS-3836 — WW-3836 SWW-3836
3/8"-16 x 5" 3-3/4" 3-1/8" 1-1/2" 50 WS-3850 — WW-3850 SWW-3850
3/8"-16 x 7" 3-7/8" 5-1/8" 1-1/2" 50 WS-3870 — — —
1/2"-13 x 2-3/4" 1-1/4" 1/8" 2-1/4" 25 WS-1226 WS-1226G WW-1226 SWW-1226
1/2"-13 x 3-3/4" 2-1/4" 1" 2-1/4" 25 WS-1236 — WW-1236 SWW-1236
1/2"-13 x 41/4" 2-3/4" 1-1/2" 21/4" 25 WS-1242 WS-1242G WW-1242 SWW-1242
1/2"-13 x 4-1/2" 3" 1-3/4" 2-1/4" 25 WS-1244 — — —
1/2"-13 x 5-1/2" 3" 2-3/4" 2-1/4" 25 — — WW-1254 SWW-1254
1/2"-13 x 5-1/2" 4" 2-3/4" 2-1/4" 25 WS-1254 WS-1254G — —
1/2"-13 x 7" 3-1/2" 4-1/4" 2-1/4" 25 — — WW-1270 —
1/2"-13 x 7" 5-1/2" 4-1/4" 2-1/4" 25 WS-1270 WS-1270G — —
5/8"-11 x 3-1/2" 1-3/4" 1/8" 2-3/4" 10 WS-5834 WS-5834G WW-5834 —
5/8"-11 x 41/4" 2-1/2" 7/8" 2-3/4" 10 WS-5842 — WW-5842 SWW-5842
5/8"-11 x 5" 3-1/4" 1-5/8" 2-3/4" 10 WS-5850 — WW-5850 SWW-5850
5/8"-11 x 6" 4-1/4" 2-5/8" 2-3/4" 10 WS-5860 WS-5860G WW-5860 —
5/8"-11 x 7" 3-1/2" 3-5/8" 2-3/4" 10 — — WW-5870 SWW-5870
5/8"-11 x 7" 5-1/4" 3-5/8" 2-3/4" 10 WS-5870 — — —
5/8"-11 x 8-1/2" 3-1/2" 5-5/8" 2-3/4" 10 — — WW-5884 —
5/8"-11 x 8-1/2" 5-3/4" 5-5/8" 2-3/4" 10 WS-5884 — — —
5/8"-11 x 10" 5-3/4" 6-5/8" 2-3/4" 10 WS-58100 — — —
3/4"-10 x 41/4" 2-3/8" 1/4" 3-1/4" 10 WS-3442 — WW-3442 —
3/4"-10 x 4-3/4" 21/4" 3/4" 3-1/4" 10 — — — SWW-3446
3/4"-10 x 4-3/4" 2-7/8" 3/4" 3-1/4" 10 WS-3446 WS-3446G WW-3446 —
3/4"-10 x 5-1/2" 3" 1-1/2" 3-1/4" 10 — — — SWW3454
3/4"-10 x 5-1/2" 3-5/8" 1-1/2" 3-1/4" 10 WS-3454 WS-3454G WW-3454 —
3/4"-10 x 6-1/4" 4-3/8" 2-1/4" 3-1/4" 10 WS-3454 — — —
3/4"-10 x 7" 3-1/2" 3" 3-1/4" 10 — — WW-3470 —
3/4"-10 x 7" 5-1/8" 3" 3-1/4" 10 WS-3470 — — —
3/4"-10 x 8-1/2" 3-1/2" 4-1/2" 3-1/4" 10 — — WW-3484 —
3/4"-10 x 8-1/2" 5-3/4" 4-1/2" 3-1/4" 10 WS-3484 WS-3484G — —
3/4"-10 x 10" 1-3/4" 6" 3-1/4" 10 — — WW34100 —
3/4"-10 x 10" 5-3/4" 6" 3-1/4" 10 WS-34100 — — —
3/4"-10 x 12" 1-3/4" 8" 3-1/4" 10 WS-34120 — — —
7/8"-9 x 6" 2-1/2" 1-3/8" 3-3/4" 5 WS-7860 — — —
7/8"-9 x 8" 2-1/2" 3-3/8" 3-3/4" 5 WS-7880 — — —
7/8"-9 x 6" 2-1/2" 5-3/8" 3-3/4" 5 WS-78100 — — —
1"-8 x 6" 2-1/2" 1/2" 4-1/2" 5 WS-10060 — WW-10060 —
1"-8 x 9" 2-1/2" 3-1/2" 4-1/2" 5 WS-10090 — WW-10090 —
Trubolt® Wedge Anchors
Trubolt wedge anchors feature a type 18-8 stainless steel split
expansion ring, a threaded stud bolt body and integral cone
expander, nut and washer. Anchor bodies are made from plated
carbon steel, hot-dipped galvanized carbon steel, Type 304 or
Type 316 stainless steel.
Anchor Materials:
Zinc Plated Carbon Steel, Hot Dipped Galvanized Carbon
Steel, Type 304 Stainless Steel, Type 316 Stainless Steel
Head Styles:
Hex Nut, Tie-wire
Size Range:
¼" dia. x 1¾" L. to 1" dia. x 12" L.
Suitable Base Materials:
Concrete, Block and Stone
Hilti® Equivalents:
Trubolt®: Compare to Kwik Bolt 3
Anchors
84 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
POWERS® SLEEVE ANCHORS
Combo Flat Head Round Head
Hex Nut
Anchor Min. Std. Carbon Stainless
Size Embed. Box Steel Steel 304
5/16" x 1-1/2" 1-1/4" 100 5005S —
5/16" x 2-1/2" 1-1/2" 100 5010S —
3/8" x 1-7/8" 1-1/2" 50 5015S 6152S
3/8" x 3" 1-1/2" 50 5020S 6153S
3/8" x 4" 1-1/2" 50 5022S —
1/2" x 2-1/4" 1-7/8" 50 5025S 6156S
1/2" x 3" 1-7/8" 25 5030S 5157S
1/2" x 4" 2-1/4" 25 5034S 6160S
1/2" x 5-1/4" 2-1/4" 25 5033S —
1/2" x 6" 2-1/4" 10 5032S —
5/8" x 2-1/4" 2" 25 5035S —
5/8" x 3" 2" 25 5038S —
5/8" x 4-1/4" 2-3/4" 10 5040S 6164S
5/8" x 6" 2-3/4" 10 5045S —
3/4" x 2-1/2" 2-1/4" 10 5050S —
3/4" x 4-1/4" 3-3/8" 10 5055S 6168S
3/4" x 6-1/4" 3-3/8" 10 5060S —
3/4" x 8-1/4" 3-3/8" 10 5065S —
The published min. length is measured from below the washer to the end of the anchor.
Acorn Nut
Anchor Bolt Min. Std. Carbon Stainless
Size Length Embed. Box Steel Steel 304
1/4" x 5/8" 1-1/32" 1/2" 100 5125S —
1/4" x 1-3/8" 1-21/32" 1-1/8" 100 5150S 6150S
1/4" x 2-1/4" 2-9/16" 1-1/8" 100 5175S —
The published min. length is measured from below the washer to the end of the anchor.
Round Head, Slotted
Anchor Drill Min. Std. Carbon Stainless
Size Dia. Embed. Box Steel Steel 304
1/4" x 1-1/8" 1/4" 1" 100 5205S —
1/4" x 2" 1/4" 1-1/8" 100 5210S 6180S
1/4" x 2-3/4" 1/4" 1-1/8" 100 5215S —
1/4" x 3-3/4" 1/4" 1-1/8" 100 5220S
5/16" x 2-3/8" 5/16" 1-1/2" 100 5225S —
5/16" x 3-3/8" 5/16" 1-1/2" 100 5230S —
3/8" x 2-1/2" 3/8" 1-1/2" 50 5235S —
3/8" x 3-1/4" 3/8" 1-1/2" 50 5240S —
The published min. length is measured from below the head to the end of the anchor.
Threshold Flat Head
Anchor Drill Min. Std. Carbon Stainless
Size Dia. Embed. Box Steel Steel 304
1/4" x 2" 1/4" 1-1/8" 100 5500S —
Hex Nut
Acorn Nut
Threshold Flat Head
Rod Hanger Lok-Bolt
Combo Flat Head
Anchor Drill Min. Std. Carbon Stainless
Size Dia. Embed. Box Steel Steel 304
1/4" x 1-1/8" 1/4" 1" 100 5305S —
1/4" x 2" 1/4" 1-1/8" 100 5310S 6170S
1/4" x 3" 1/4" 1-1/8" 100 5315S 6172S
1/4" x 4" 1/4" 1-1/8" 100 5320S —
1/4" x 5-1/4" 1/4" 1-1/8" 100 5325S —
5/16" x 2-1/2" 5/16" 1-1/2" 100 5330S —
3/8" x 2-3/4" 3/8" 1-1/2" 50 5340S —
3/8" x 4" 3/8" 1-1/2" 50 5345S 6174S
3/8" x 5" 3/8" 1-5/8" 50 5350S 6175S
3/8" x 6" 3/8" 1-5/8" 50 5360S 6176S
The published length is the minimum overall length of the anchor.
Lok-Bolt Extenders
Anchor Drill Min. Std. Carbon Stainless
Size Dia. Embed. Box Steel Steel 304
3/8" x 1" 3/8" — 50 5684S —
Extenders are used for added length on all head styles.
Lok-Bolt AS™ Sleeve Anchors
The Lok-Bolt AS™ anchor is a pre-assembled, single-unit,
all-steel sleeve anchor available in carbon steel and stainless
steel which can be used in concrete, block, brick and stone.
Anchor Materials:
Carbon Steel, Type 304 Stainless Steel
Head Styles:
Finished Hex Head, Acorn Nut, Round Head, Combo Flat
Head, Threshold Flat Head, Rod Hanger, Tie-wire
Size Range:
¼" dia. x 5 /
8" L. to ¾" dia. x 8¼" L.
Suitable Base Materials:
Concrete, Block, and Brick
Rod Hanger
Part Anchor Minimum Std.
Number Size Embed Box
5810S 1/4" x 1-1/2" 1-1/2" 50
5815S 3/8" x 1-7/8" 1-5/8" 50
5825S 1/2" x 2-1/4" 2-1/4" 25
Tie Wire, Lok-Bolt
Anchor Min. Std. Carbon Stainless
Size Embed. Box Steel Steel 304
5/16" x 1-1/2" 1-1/2" 50 5700S —
85
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RED HEAD® SLEEVE ANCHORS
Phillips Flat Head
FS
Hex Nut
HN
Acorn Nut
AN
Threshold Flat
Head TH
Round Head
RS
Tie Wire
TW
Head Styles
Anchor Max. Fixture Min. Std. Carbon Steel Carbon Steel S. Steel 304 S. Steel 304
Size Thickness Embed. Box Hex Nut Phillips Flat Head Hex Nut Phillips Flat Head
1/4" x 1-3/8" 1/4" 1-1/8" 100 HN-1413 — SHN-1413 —
1/4" x 1-1/2" 1/4" 1-1/8" 100 — FS-1411 — —
1/4" x 2-1/4" 1-1/8" 1-1/8" 100 HN-1422 FS-1420 — SFS-1420
1/4" x 3-1/8" 2" 1-1/8" 100 — FS-1430 — SFS-1430
1/4" x 4" 2-7/8" 1-1/8" 100 — FS-1440 — —
5/16" x 1-1/2" 1/4" 1-1/4" 100 HN-1614 — — —
5/16" x 2-1/2" 1-1/4" 1-1/4" 100 HN-1624 — — —
3/8" x 1-7/8" 3/8" 1-1/2" 50 HN-3817 — SHN-3817 —
3/8" x 2-7/8" 1-1/2" 1-3/8" 50 — FS-3826 — SFS-3826
3/8" x 3" 1-1/2" 1-1/2" 50 HN-3830 — SHN-3830 —
3/8" x 4" 2-1/2" 1-1/2" 50 — FS-3840 — SFS-3840
3/8" x 5" 3-1/2" 1-1/2" 50 — FS-3850 — —
3/8" x 6" 4-1/2" 1-1/2" 50 — FS-3860 — —
1/2" x 2-1/4" 3/8" 1-7/8" 25 HN-1222 — SHN-1222 —
1/2" x 3" 1-1/8" 1-7/8" 25 HN-1230 — SHN 1230 —
1/2" x 4" 2-1/8" 1-7/8" 25 HN-1240 — SHN-1240 —
5/8" x 2-1/4" 1/4" 2" 25 HN-5822 — — SFS-3826
5/8" x 3" 1" 2" 25 HN-5830 — — —
5/8" x 4-1/4" 2-1" 2" 10 HN-5842 — SHN-5842 —
5/8" x 6" 4" 2" 10 HN-5860 — — —
3/4" x 2-1/2" 1/4" 2-1/4" 10 HN-3424 — — —
3/4" x 4" 1-3/4" 2-1/4" 10 HN-3440 — — —
3/4" x 6-1/4" 4" 2-1/4" 10 HN-3462 — — —
Acorn Nut, Dynabolt®, Carbon Steel
Anchor Max. Fixture Min. Std. Part
Size Thickness Embed. Box Number
1/4" x 5/8" 1/8" 1/2" 100 AN-1405
1/4" x 1-3/8" 1/4" 1-1/8" 100 AN-1413
1/4" x 2-1/4" 1-1/8" 1-1/8" 100 AN-1422
Threshold Flat Head, Dynabolt®, Carbon Steel
Anchor Max. Fixture Min. Std. Part
Size Thickness Embed. Box Number
1/4" x 2-1/4" 1-1/8" 1-1/8" 100 TH-1422
Round Head, Dynabolt®, Type 304 Stainless Steel
Anchor Max. Fixture Min. Std. Part
Size Thickness Embed. Box Number
1/4" x 2" 7/8" 1-1/8" 100 SRS-1420
Round Head, Dynabolt®, Carbon Steel
Anchor Max. Fixture Min. Std. Part
Size Thickness Embed. Box Number
1/4" x 2-7/8" 1-3/4" 1-1/8" 100 RS-1426
3/8" x 2-5/8" 1-1/8" 1-1/2" 100 RS-3824
Dynabolt® Sleeve Anchors
Dynabolt is a versatile, medium-duty expansion anchor
featuring a split expansion sleeve over a threaded stud
bolt body and integral expander, nut and washer.
Anchor Materials:
Zinc Plated Carbon
Steel, Type 304
Stainless Steel
Head Styles:
Hex Nut, Acorn
Nut, Round Head,
Phillips Flat Head,
Threshold Flat
Head, Tie-wire
Size Range:
¼" dia. x 5 /
8" L. to
¾" dia. x 6½" L.
Suitable Base Materials:
Concrete, Block, Brick and Stone
Hilti® Equivalents:
Dynabolt®: Compare to HLC Anchors
86 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
POWER-BOLT™ SLEEVE ANCHORS
Anchor Drill Minimum Std. Carbon Steel S. Steel 304 Carbon Steel
Size Diameter Embedment Box Hex Head Hex Head Flat Head
1/4" x 1" 1/4" 7/8" 100 6900 5900 —
1/4" x 1-3/4" 1/4" 1-1/4" 100 6902 5902 —
1/4" x 3" 1/4" 1-1/4" 100 6906 5906 —
5/16" x 1-3/4" 5/16" 1-1/2" 100 6907 — —
5/16" x 2-1/2" 5/16" 1-1/2" 50 6908 — —
5/16" x 3-1/2" 5/16" 1-1/2" 50 6909 — —
3/8" x 2-1/4" 3/8" 2" 50 6910 5910 —
3/8" x 1-7/8" 3/8" 1-1/4" 50 6911 — —
3/8" x 3" 3/8" 2" 50 6913 — —
3/8" x 3¼" 3/8" 2" 50 — — 6981
3/8" x 4" 3/8" 2" 50 6916 5916 —
3/8" x 5" 3/8" 2" 50 — — 6982
3/8" x 6" 3/8" 2" 50 — — 6983
1/2" x 2-3/4" 1/2" 2-1/2" 50 6930 5930 —
1/2" x 3-3/4" 1/2" 2-1/2" 25 6932 — —
1/2" x 4-3/4" 1/2" 2-1/2" 25 6934 5934 —
1/2" x 5" 1/2" 2-1/2" 25 — — 6984
1/2" x 5-3/4" 1/2" 2-1/2" 25 6936 — —
5/8" x 3" 5/8" 2-3/4" 20 6940 — —
5/8" x 4" 5/8" 2-3/4" 15 6942 — —
5/8" x 5" 5/8" 2-3/4" 15 6944 — —
5/8" x 5-1/2" 5/8" 2-3/4" 15 — — 6987
5/8" x 6" 5/8" 2-3/4" 15 6945 — —
5/8" x 8-1/2" 5/8" 2-3/4" 10 6947 — —
3/4" x 3-1/4" 3/4" 3" 15 6950 — —
3/4" x 4-1/4" 3/4" 3" 10 6952 — —
3/4" x 5-1/4" 3/4" 3" 10 6954 — —
3/4" x 6-1/4" 3/4" 3" 10 6956 — —
3/4" x 8-1/4" 3/4" 3" 10 6957 — —
The published length is measured from below the washer to the end of the anchor. 1/4" and 5/16" Power-Bolt™ utilize a Grade 8 Bolt
Finished Hex Head
Power-Bolt™ Sleeve Anchors
Vibration Resistant & Removable
The Power-Bolt anchor, formerly known as the Rawl-Bolt, is
a heavy-duty, sleeve style, self-locking anchor. It is available
with a finished hex head or flat-head with a hex key insert
and can be used in concrete, block, brick and/or stone.
Carbon Steel, Hex Head, Power-Bolt™
Manufactured using a Grade 5 bolt. Plated with a commer-
cial bright zinc finish and has a supplementary chromate
treatment in accordance with ASTM Specification B633.
Carbon Steel, Flat Head, Power-Bolt™
The flat head Power-Bolt™ anchor has a hex key insert
formed in the head of the bolt. Each box contains an Allen
wrench which matches the insert size.
304 Stainless Steel, Hex Head, Power-Bolt™
Manufactured from 300 series stainless steel (passivated).
Suitable Base Materials:
Concrete, Block, Brick and Stone
Flat Head
87
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
#D25023K
7/8" Compact SDS Drive D-Handle Rotary Hammer
• Compare to Bosch Bulldog SDS Hammers
• Includes depth gauge, side handle and carrying case.
BANG-IT™ / WOOD KNOCKER™
Bang-It™ Concrete Inserts Rod Hanging System
Part Color Pre-Drilled Std
No. Description Code Hole Box
7540 1/4" Bang-It™ Brown 13 ⁄ 16" 100
7542 3/8" Bang-It™ Green 13 ⁄ 16" 100
7544 1/2" Bang-It™ Yellow 13 ⁄ 16" 50
7546 5/8" Bang-It™ Red 1-13 ⁄ 16" 50
7548 3/4" Bang-It™ Purple 1-13 ⁄ 16" 50
7549 7/8" Bang-It™ Black 1-13 ⁄ 16" 50
Bang-It™ Concrete Inserts
Designed for installation in and through metal composite
deck (pan-deck) used to support newly poured concrete
floors or roof slabs. Allows overhead attachment of steel
threaded rod and threaded bolts in sizes ranging from 1/4"
to 7/8" in diameter. Protective sleeve prevents sprayed fire-
proofing and acoustical dampening products from clogging
the internal threads of the insert side. Color coded by size.
Anchor Materials:
Carbon Steel & Engineered Plastic
Size Range:
1/4" to 7/8" Threaded Rod
Wood-Knocker™ Concrete Inserts Rod Hanging System
Part Color Std
No. Description Code Box
7550 1/4" Wood-Knocker™ Brown 200
7552 3/8" Wood-Knocker™ Green 200
7554 1/2" Wood-Knocker™ Yellow 200
7556 5/8" Wood-Knocker™ Red 150
7558 3/4" Wood-Knocker™ Purple 150
7567 1/2" Coil-Thread Wood-Knocker™ Yellow 200
7568 3/4" Coil Thread Wood-Knocker™ Purple 150
Wood-Knocker™ Concrete Inserts
Wood-Knocker™ concrete
inserts are installed onto
wooden forms used to sup-
port newly poured concrete
floor slabs, roof slabs or walls.
Allows attachment of steel
threaded rod and threaded
bolts in sizes ranging from
1/4" to 3/4" in diameter. Color
coded by size.
Anchor Materials:
Carbon Steel and Engineered
Plastic
Size Range:
1/4" to 3/4" Threaded Rod
Suitable Base Materials:
Concrete
Bang-It™ Installation Accessories
P/N Description
7560 Bang-It™ Deck Driller
7562 13/16" Carbide Hole Saw for
1/4", 3/8" & 1/2" sizes
7564 1-13/16" Carbide Hole Saw for
5/8", 3/4" & 7/8" sizes
7566 Replacement Pilot Bit
Bang-It™ Installation
Carbide Hole Saws
D25023K
# D25223K 1" D-Handle SDS Plus Hammer
w/SHOCKS Active Vibration Control
• Variable speed trigger allows user to instantly control speed
from 0 to dialed setting
• SHOCKS – Active Vibration Control® reduces vibration up to 50%
• Includes depth gauge, side handle & carrying case
D25223K
Check out our Complete Line of SDS,
SDS MAX and Spline Rotary Hammers
Beginning on page 317 of our Tool Section
88 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
POWERS® WEDGE-BOLT™
410 Stainless Steel Wedge-Bolt (Blue Tip) -
For applications where additional corrosion resistance is
needed. Designed to be used with a matched tolerance
Wedge-Bit™ for optimum performance. The Wedge-Bolt works
in fixture clearance holes that are 1/16" over nominal, which is
typical of standard fixture holes used in steel fabrication. Blue
Tip Wedge-Bolts® must be installed using Wedge-Bits™
Size Clearance Min. Thread Std Part
(Inch) Hole Dia. Embed. Length Box No.
1/4 x 1-3/4 5/16" 1" 1-5/8" 100 7701N
3/8 x 1-3/4 5/16" 1" 1-1/2" 50 7702N
3/8 x 2-1/2 7/16" 1-1/2" 2-1/4" 50 7705N
3/8 x 3 7/16" 1-1/2" 2-3/4" 50 7706N
3/8 x 4 7/16" 1-1/2" 3-3/4" 50 7707N
3/8 x 5 7/16" 1-1/2" 3-3/4" 50 7708N
1/2 x 3 9/16" 1-3/4" 2-3/4" 50 7710N
1/2 x 4 9/16" 1-3/4" 3-3/4" 50 7711N
1/2 x 5 9/16" 1-3/4" 3-3/4" 50 7712N
For ease in identification, Wedge-Bolts® have a blue tip,
Wedge-Bolts® OT have an orange tip
Wedge-Bolt™ Screw Anchors
A one-piece, heavy-duty screw anchor with a finished hex
head. Simple to install, easy to identify, fully removable,
and vibration resistant.
Suitable Base Materials:
Concrete, Block, Stone, Brick Masonry and Grouted CMU
Wedge-Bits™ Required for use with Wedge-Bolt™ Blue Tip Anchors.
Carbon Steel Wedge-Bolt Orange Tip - specifically engineered part for the racking industry. Use in
fixture clearance holes sized a minimum of 1/8" over nominal. The Wedge-Bolt OT must be installed with an
ANSI rotary drill bit.
Size ANSI-Bit Clearance Min. Thread Std Wedge-Bolt® OT
(Inch) Dia. Hole Dia. Embed. Length Box Carbon Steel
1/4 x 3 1/4" 3/8" 1" 2-3/4" 100 7215
3/8 x 4 3/8" 7/16" 1-1/2" 3-3/4" 50 7216
1/2 x 4 1/2" 9/16" 1-3/4" 3-3/4" 50 7217
1/2 x 5 1/2" 9/16" 1-3/4" 3-3/4" 25 7218
1/2 x 6 1/2" 9/16" 1-3/4" 3-3/4" 25 7214
1/2 x 6-1/2 1/2" 9/16" 1-3/4" 3-3/4" 25 7233
5/8 x 4 5/8" 11/16" 2-1/2" 3¾" 25 7219
5/8 x 5 5/8" 11/16" 2-1/2" 2¾" 25 7221
5/8 x 6 5/8" 11/16" 2-1/2" 2¾" 25 7227
5/8 x 7 5/8" 11/16" 2-1/2" 2¾" 25 7229
3/4 x 6 3/4" 13/16" 3" 3-3/4" 20 7231
3/4 x 8 3/4" 13/16" 3" 3-3/4" 20 7232
Hilti® Equivalents:
Wedge-Bolt™: Compare to
HUS-H Screw Anchors
SDS-Plus Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1312 1/4" 2"/4"
1314 1/4" 4"/6"
1316 3/8" 4"/6"
1318 3/8" 6"/8"
1332 3/8" 10"/12"
1320 1/2" 4"/6"
1322 1/2" 8"/10"
1334 1/2" 10"/12"
1324 3/8" 6"/8"
1326 3/8" 10"/12"
1336 5/8" 16"/18"
1328 3/4" 6"/8"
1330 3/4" 10"/12"
SDS-Max Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1354 1/2" 8"/13"
1356 5/8" 8"/13"
1357 5/8" 16"/21"
1358 3/4" 8"/13"
Spline Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1340 1/2" 8"/13"
1342 1/2" 11"/16"
1344 5/8" 8"/13"
1348 1/2" 8"/13"
HD Straight Shank
Wedge-Bit™
Part Usable/Overall
No. Size Lengths
1370 1/4" 2-¾"/4"
1372 1/4" 4"/6"
1380 3/8" 4"/6"
1384 3/8" 11"/13"
1390 1/2" 4"/6"
1390 1/2" 11"/13"
1396 5/8" 11"/13"
1397 3/4" 11"/13"
For proper performance, the Wedge-Bolt+,
and 410 Stainless Steel Wedge-Bolt anchors
(indicated by a "Blue-Tip") must be installed with a
Wedge-Bit. The Wedge-Bit has a special matched
tolerance range designed to provide optimum
performance for the anchor.
See page 72 for
Wedge-Bolt +
Code Listed Anchors
89
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Red Head® LDT Anchors
Drill Max. 410
Size Bit Thickness Std Carbon Stainless
(Inch) Dia. of Fixture Box Steel Steel
3/8 x 1-3/4 5/16" 1/4" 50 LDT-3816 SLD-3816
3/8 x 1-1/2 5/16" 1" 50 LDT-3824 SLD-3824
3/8 x 3 5/16" 1-1/2" 50 LDT-3830 SLD-3830
3/8 x 4 5/16" 2-1/2" 50 LDT-3840 SLD-3840
3/8 x 5 5/16" 3-1/2" 40 LDT-3850 SLD-3850
1/2 x 3 7/16" 1" 25 LDT-1230 SLD-1230
1/2 x 4 7/16" 2" 25 LDT-1240 SLD-1240
1/2 x 5 7/16" 3" 25 LDT-1250 SLD-1250
1/2 x 6 7/16" 4" 20 LDT-1260 —
5/8 x 3 1/2" 1/4" 10 LDT-5830 —
5/8 x 4 1/2" 1-1/4" 10 LDT-5840 —
5/8 x 5 1/2" 2-1/4" 10 LDT-5850 —
5/8 x 6 1/2" 3-1/4" 10 LDT-5860 —
3/4 x 4-1/2 5/8" 1-1/4" 10 LDT-3444 —
3/4 x 5-1/2 5/8" 2-1/4" 10 LDT-3454 —
3/4 x 6-1/4 5/8" 3" 10 LDT-3462 —
The stainless steel LDT’s will be gold in color in order to
differentiate them from the carbon steel anchors which are silver.
LDT® Screw Anchor
Uses ANSI Drill Bits - No Special Drill Bits to Purchase!
• Cuts its own threads into concrete.
• Made of hardened carbon steel and zinc plated.
• Finished hex washer head with anti-rotation serrations pre-
vents anchor back-out.
• Anchor head is stamped with a length identification code.
Anchor Materials:
Zinc Plated Carbon Steel, 410 Stainless Steel
Size Range:
3
/
8" & ¾" diameters. 1¾" to 6" lengths
Suitable Base Materials:
Concrete, Masonry, Block
Hilti® Equivalents:
LDT Anchors: Compare to HUS-H Screw Anchors
RED HEAD® LDT ANCHORS
Patented Sawtooth™
threads for easier
installation in 5/8"
and 3/4" sizes
Compare:
90 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Steel Dropin™ Internally Threaded
Expansion Anchors
An all-steel, machine bolt anchor available in carbon steel
and two types of stainless steel. May be used in solid con-
crete, hard stone and solid block base materials. FM and
UL Listings make this the appropriate anchor for overhead
applications.
Anchor Materials:
Zinc Plated Carbon Steel, Type
303 Stainless Steel, Type 316
Stainless Steel
Size Range:
1/4" to 3/4" Diameter UNC Coarse Thread
Suitable Base Materials:
Concrete
Hilti® Equivalents:
Dropin®: Compare to
HDI Anchors
Carbon Steel Smooth
Wall Dropin (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6304 1/4" 3/8" 1" 7/16" 100
6306 3/8" 1/2" 1-9/16" 5/8" 50
6308 1/2" 5/8" 2" 13/16" 50
6320 5/8" 7/8" 2-1/2" 1-3/16" 25
6312 3/4" 1" 3-3/16" 1-3/8" 10
Type 303 Stainless Steel Dropin (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6204 1/4" 3/8" 1" 7/16" 100
6206 3/8" 1/2" 1-9/16" 5/8" 50
6208 1/2" 5/8" 2" 13/16" 50
6210 5/8" 7/8" 2-1/2" 1-3/16" 25
6212 3/4" 1" 3-3/16" 1-3/8" 10
Type 316 Stainless Steel Dropin (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6224 1/4" 3/8" 1" 7/16" 100
6226 3/8" 1/2" 1-9/16" 5/8" 50
6228 1/2" 5/8" 2" 13/16" 50
6230 5/8" 7/8" 2-1/2" 1-3/16" 25
6232 3/4" 1" 3-3/16" 1-3/8" 10
Carbon Steel Flanged
Dropin (Lipped)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6324 1/4" 3/8" 1" 7/16" 100
6326 3/8" 1/2" 1-9/16" 5/8" 50
6328 1/2" 5/8" 2" 13/16" 5
Setting Tools
Part No.: 6305 6307 6309 6311 6313
Anchor Size: 1/4" 3/8" 1/2" 5/8" 3/4"
Part No. Size
9323 1/4"
9333 5/16"
9343 3/8"
9353 1/2"
9363 5/8"
for Hollow Base Materials
Hollow-Set™
Internally Threaded Expansion Anchors
Designed for anchoring hollow base materials such as
hollow concrete block, brick with weep holes and hollow
core pre-cast concrete plank. It may also be used in solid
materials. May be installed flush or below base material
surface. Qualified for seismic and wind loads.
Suitable Base Materials:
Concrete, Pre-Cast Hollow Core Plank, Hollow Concrete
and Brick Masonry
Hollow-Set Dropin with
Carbon Steel Cone
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Sleeve
Depth
Std.
Box
9320 1/4" 3/8" 7/8" 5/8" 100
9330 5/16" 5/8" 1-5/16" 5/16" 50
9340 3/8" 58" 1-5/16" 15/16" 50
9350 1/2" 3/4" 1-3/4" 1-1/4" 50
9360 5/8" 1" 2" 1-1/2" 25
Hollow-Set Dropin with Stainless Steel Cone
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
9420 1/4" 3/8" 7/8" 5/8" 100
9440 3/8" 5/8" 1-5/16" 15/16" 100
Setting Tool (Solid Base Materials)
Part No.: 9322 9342 9352 9362
Anchor Size: 1/4" 5/16" & 3/8" 1/2" 5/8"
Hollowset Dropins™
POWERS® DROPIN™ / HOLLOWSET™ ANCHORS
91
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
POWERS® DROPIN™+ / SNAKE™+ / VERTIGO™+
Carbon Steel Smooth
Wall Dropin+ (No Lip)
Part No. Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6304SD 1/4" 3/8" 1" 7/16" 100
6306SD 3/8" 1/2" 1-9/16" 5/8" 100
6308SD 1/2" 5/8" 2" 13/16" 100
6312SD 5/8" 7/8" 2-1/2" 1-3/16" 100
6320SD 3/4" 1" 3-3/16" 1-3/8" 100
Type 304 Stainless Steel Dropin+ (No Lip)
Part No. Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6204SD 1/4" 3/8" 1" 7/16" 100
6206SD 3/8" 1/2" 1-9/16" 5/8" 100
6208SD 1/2" 5/8" 2" 13/16" 100
6210SD 5/8" 7/8" 2-1/2" 1-3/16" 100
6212SD 3/4" 1" 3-3/16" 1-3/8" 100
Type 316 Stainless Steel Dropin+ (No Lip)
Part No. Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6224SD 1/4" 3/8" 1" 7/16" 100
6226 3/8" 1/2" 1-9/16" 5/8" 50
6228 1/2" 5/8" 2" 13/16" 50
6230 5/8" 7/8" 2-1/2" 1-3/16" 25
6232 3/4" 1" 3-3/16" 1-3/8" 10
Carbon Steel Flanged Dropin+ (Lipped)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6324SD 1/4" 3/8" 1" 7/16" 100
6326SD 3/8" 1/2" 1-9/16" 5/8" 50
6328SD 1/2" 5/8" 2" 13/16" 5
Carbon Steel Coil Thread Dropin+ (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
6330SD 1/2" 5/8" 2" 3/4" 100
6332SD 3/4" 1" 3-3/16" 1-1/4" 100
Smart Dropin™+
Anchors
An all-steel, machine bolt an-
chor. Features a Tapered Plug Pin requiring fewer hammer
blows to install. Suitable for uncracked concrete. Tested to
ICC-ES AC193. (Available September 2010).
Part Rod/Anchor Min. Hole Thread Std
No. Size Depth Depth Box
6400SD 1/4" 1-5/8" 11/16" 100
6401SD 3/8" 1-5/8" 11/16" 50
6403SD 1/2" 2-1/2" 29/32" 50
6402SD Extra setting Tool for 1/4" Snake™ 1
6407SD Extra Setting Tool for 3/8" Snake™ 1
6404SD Extra Setting Tool for 1/2" Snake™ 1
Snake™ + Internally Threaded
Self-Tapping Anchor
Designed for performance in cracked and
uncracked concrete. Suitable base materials
include normal-weight concrete, structural sand-
lightweight concrete and concrete over metal
deck. Installed with a power tool and a Snake+
setting tool. After installation a steel insert ele-
ment is threaded into the anchor body.
General Applications and Uses
• Fire Sprinkler Systems • Pipe Supports
• Suspended Lighting • Suspended Conduit
• Cable Tray and Strut • Tension zone areas
• Interior applications/low level corrosion environment
• Seismic and wind loading applications
Anchor Materials: Rod/Anchor Size Range:
Zinc Plated Carbon Steel 3
/
8" & ½" diameters.
A Snake™ setting
tool is included
in each box of
anchors
See page 98 for a complete listing of Powers
Vertigo Rod Hanging Anchors
100% Domestically produced zinc plated steel drop-in anchors.
Domestic Drop-In Anchors (No Lip)
Part No. Bolt Size Drill Dia. Std. Box
PF-25DIAZ/DOM 1/4" 3/8" 100
PF-37DIAZ/DOM 3/8" 1/2" 50
PF-50DIAZ/DOM 1/2" 5/8" 50
PF-62DIAZ/DOM 5/8" 7/8" 25
PF-75DIAZ/DOM 3/4" 1" 10
Concrete Vertigo+
Reliable performance in cracked or uncracked concrete.
Yellow Dichromate finish, Wedge-Bolt Blue Tipped Point.
Requires use of Wedge-Bit (included) for installation.
Part No. Rod Dia. Screw Shank
Size & Length Point Style
7180SD 1/4" 1/4" x 1-1/4" Wedge-Bolt
Blue-Tip
7181SD 3/8" 1/4" x 1-1/2"
7182SD 1/2" 3/8" x 2-3/4"
7198 1/2" Driver socket for Vertigo+
92 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RED HEAD™ MULTI-SET DROP-IN ANCHORS
Mult-Set II Drop-In Anchors Hilti® Equivalents:
Multi-Set II®: Compare to HDI Anchors
Plated
Steel Drop-In Anchor
(Lipped)
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RM-14 1/4"-20 3/8" 1" 3/8" 100
RM-38 3/8"-16 1/2" 1-5/8" 1/2" 50
RM-12 1/2"-13 5/8" 2" 3/4" 50
RM-58 5/8"-11 7/8" 2-1/2" 1" 25
RM-34 3/4"-10 1" 3-3/16" 1-1/4" 10
Plated
Steel Drop-In Anchor
(No Lip)
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RL-14 1/4"-20 3/8" 1" 3/8" 100
RL-38 3/8"-16 1/2" 1-5/8" 1/2" 50
RL-12 1/2"-13 5/8" 2" 3/4" 50
RL-58 5/8"-11 7/8" 2-1/2" 1" 25
RL-34 3/4"-10 1" 3-3/16" 1-1/4" 10
Steel Coil
Thread Drop-In Anchor
Part
No.
Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
CL-12 1/2"-6 5/8" 2" 3/4" 50
CL-34 3/4"-4.5 1" 3-3/16" 1-1/4" 10
Setting Tools
Part No.: RT-114 RT-138 RT-112 RT-158 RT-134
Anchor Size: 1/4" 3/8" 1/2" 5/8" 3/4"
18-8 Stainless Steel Dropin (No Lip)
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
SRM-14 1/4"-20 3/8" 1" 3/8" 100
SRM-38 3/8"-16 1/2" 1-5/8" 1/2" 50
SRM-12 1/2"-13 5/8" 2" 3/4" 50
SRM-58 5/8"-11 7/8" 2-1/2" 1" 25
SRM-34 3/4"-10 1" 3-3/16" 1-1/4" 10
316 Stainless Steel Dropin (No Lip)
Part No. Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
SSRM-38 3/8"-16 1/2" 1-5/8" 1/2" 50
SSRM-12 1/2"-13 5/8" 2" 3/4" 50
"Mini" Steel Drop-In
Anchor (Lipped)
Part No. Bolt
Size
Drill
Dia.
Min.
Embed
Thread
Depth
Std.
Box
RX-38 3/8"-16 1/2" 3/4" 3/8" 100
RX-12 1/2"-13 5/8" 1" 1/2" 50
RTX-138 Setting Tool for RX-38
RTX-112 Setting Tool for RX-12
Stop Overdrilling Holes for Drop-ins & Mini-Dropins
SDS -Bit
Part No. Standard Drop-In Anchors
207STP-6-17 3/8" x 1-1/16" Carbide Stop-Bit
for 1/4" Standard Drop-in anchors
207STP-8-27 1/2" x 1-11/16" Carbide Stop-Bit
for 3/8" Standard Drop-in anchors
207STP-10-33 5/8" x 2-1/16" Carbide Stop-Bit
for 1/2" Standard Drop-in anchors
Part No. Mini Drop-In Anchors
207STP-10-19 5/8" x 1-3/16" Carbide Stop-Bit
for 1/2" Mini Drop-in anchors
207STP-8-13 1/2" x 13/16" Carbide Stop-Bit
for 3/8" Mini-Drop-in anchors
Mini Dropin™
Internally Threaded
Expansion Anchors
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Sleeve
Depth
Std.
Box
6335 1/4" 3/8" 5/8" 3/8" 100
6322 3/8" 1/2" 3/4" 13/32" 100
6337 1/2" 5/8" 1" 5/8" 50
Setting Tool
Part No.: 6336 6323 6338
Anchor Size: 1/4" 3/8" 1/2"
93
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADED ROD ANCHORING
Rod Hanger, Powerstud® (for 3/8" Rod)
Part Anchor Size Thread Minimum Std.
Number (Drill Dia.) Depth Embed Box
7806 1/2" x 2-3/8" 9/16" 2-1/4" 50
Power-Stud™ Wedge Anchors
Rod Hanging Applications
A torque-controlled, wedge expansion anchor
suitable for applications in solid and grout-filled
concrete masonry.
Rod Hanger, Lok-Bolt™
Part Anchor Minimum Std.
Number Size Embed Box
5810 1/4" x 1-1/2" 1-1/2" 50
5815 3/8" x 1-7/8" 1-5/8" 50
5825 1/2" x 2-1/4" 2-1/4" 25
Lok-bolt™ Sleeve Anchors
Rod Hanging Applications
A pre-assembled, single-unit sleeve anchor avail-
able in carbon steel which can be used in concrete,
block, brick & stone.
Pipe Spike® Rod Hanging
Part Anchor Drill Min. Std
No. Size Diameter Embed. Box
3755 1/4" 3/16" 1-1/4" 100
3758 3/8" 1/4" 1-3/4" 50
Spike® Rod Hanging Anchors
A one-piece, tamper-proof, vibration resistant an-
chor for use in concrete, brick, block or stone. An
"S" shaped configuration at the working end of the
anchor creates an expansion mechanism. Suitable
for concrete, brick, block or stone.
SPIKE® Driver
Part No. Description Guide I.D.
3790 SPIKE® Driver 1000 1/2"
3791 SPIKE® Driver 2000 1/2"
Pipe SPIKE® Setting Tool
Part No. Description Guide I.D.
3760 Pipe SPIKE® Setting Tool 5/16"
SPIKE™ Installation Tools
Tools allow SPIKE® anchors to be installed in confined areas
and prevent damage to the fixture from stray hammer blows.
Setting Tool SPIKE® Driver
Materials and Finishes
• Carbon Steel
• Plain • Zinc Plated
• Hot Dip Galvanized
• Stainless Steel
• Type 304 • Type 316
• B7 (ASTM A193)
• Coil Thread (ASTM A108)
Threaded Rod and Studs
Threaded rod in stock
6 ft / 10 ft / 12 ft lengths
Studs Cut to any length
Double End Studs End
Tie Rods
Studs
Available in Stainless
Steel and B7
Maximum Safe Weight
Nominal Rod Diameter Load Pounds 650O per ft
1/4 240 0.12
5/16 300 0.20
3/8 730 0.30
1/2 1350 0.54
5/8 1810 0.85
3/4 2710 1.20
7/8 4480 1.70
1 5900 2.25
1-1/8 6230 2.80
1-1/4 9500 3.50
1-3/8 9000 4.50
1-1/2 13800 5.00
1-3/4 15700 6.35
2 20700 9.12
Technical Data
Load Chart for Threaded Rod - Low Carbon
MADE IN THE USA
AVAILABLE
ON REQUEST
94 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAMMYS™ THREADED ROD ANCHORING
Threaded Rod Hangers
General Application & Uses
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
Features and Benefits
• Sidewinders are the side mount ver-
sions of the Sammys.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base Steel Purlins & Beams,
Materials: Wood, Concrete
• One system for all rod hanging ap-
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are self-
drilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjust-
able torque, battery-powered screw
gun or hammer drill.
SAMMY'S
Model GST Wood Vertical Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
GST .750 1/4" 1/4" x 3/4" #14 —
GST 100 1/4" 1/4" x 1" #14 —
GST 200 1/4" 1/4" x 2" #14 —
GST 300 1/4" 1/4" x 3" #14 —
GST 600 1/4" 1/4" x 6" #14 —
GST .75 3/8" 1/4" x 3/4" #14 —
GST 10 3/8" 1/4" x 1" #14 —
GST 20 3/8" 1/4" x 2" #14 UL, FM, NFPA
GST 25-380 3/8" 3/8" x 2-1/2" #14 UL, NFPA
GST 30 3/8" 1/4" x 3" #14 UL, FM, NFPA
GST 40 3/8" 1/4" x 4" #14 NFPA
GST 60 3/8" 1/4" x 6" #14 NFPA
GST 2 1/2" 1/4" x 2" #14SW —
GST 2.5-380 1/2" 3/8" x 2-1/2" #14SW —
GST 3 1/2" 1/4" x 3" #14SW —
GST 4 1/2" 1/4" x 4" #14SW —
GST 6 1/2" 1/4" x 6" #14SW —
SAMMY'S
Model DST, DSTR & TEK Steel Vertical Hangers
DST - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄
16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Packaged 25 per box.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
DSTR 100 1/4" 1/4-20 x 1" #14 —
DST 100 1/4" 1/4-14 x 1" #14 —
DST 150 1/4" 1/4-14 x 1-1/2" #14 —
DST 200 1/4" 1/4-14 x 2" #14 —
DST 250 1/4" 1/4-12 x 2-1/2" #14 —
DST 300 1/4" 1/4-14 x 3" #14 —
TEK 500 1/4" 12-24 x 1-1/2" #14 —
DSTR 1-1/2" 3/8" 12-24 x 1-1/2" #14 UL, FM, NFPA
DSTR 1" 3/8" 1/4-20 x 1" #14 UL, FM, NFPA
DSTR 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
DST 10 3/8" 1/4-14 x 1" #14 NFPA
DST 15 3/8" 1/4-12 x 1-1/2" #14 NFPA
DST 20 3/8" 1/4-14 x 2" #14 NFPA
DST 25 3/8" 1/4-14 x 2-1/2" #14 NFPA
DST 30 3/8" 1/4-14 x 3" #14 NFPA
DST 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
TEK 50 3/8" 12-24 x 1-1/2" #14 FM, NFPA
DST 2.0 1/2" 1/4-14 x 2" #14SW —
DST 2.5 1/2" 1/4-14 x 2-1/2" #14SW —
DSTR 1.0 1/2" 1/4-20 x 1" #14SW —
DSTR 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
DST 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
TEK 5.0 1/2" 12-24 x 1-1/2" #14SW —
SAMMY'S
Model CST Concrete Vertical Hangers
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
CST 200 1/4" 5/16" x 1-1/2" #14 —
CST 20 3/8" 5/16" x 1-1/2" #14 FM
CST 2 1/2" 5/16" x 1-1/2" #14SW —
SAMMY'S
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty
status. Please see page 97 for ordering information
Vertical Applications
95
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SAMMYS™ THREADED ROD ANCHORING
Sammys™ Sidewinders™
SAMMY'S
Model SWG Wood SIDEWINDERS™ Hangers
Self-threading into wood. No pre-drilling required. 25/box
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
SWG 100 1/4" 1/4" x 1" #14SW —
SWG 200 1/4" 1/4" x 2" #14SW —
SWG 10 3/8" 1/4" x 1" #14SW —
SWG 20 3/8" 1/4" x 2" #14SW NFPA
SWG 25-380 3/8" 3/8" x 2-1/2" #14SW NFPA
SWG 30 3/8" 1/4" x 3" #14SW —
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Rod Screw Shank
Model No. Dia. Size & Length Approvals
SWD 10 3/8" 1/4-14 x 1" NFPA
SWD 15 3/8" 1/4-14 x 1-1/2" NFPA
SWD 20 3/8" 1/4-14 x 2 NFPA
SWD 516 3/8" 5/16-18 x 1-1/4" NFPA
SWDR 1-1/2" 3/8" 1/4-20 x 1" UL, NFPA
SWDR 1" 3/8" 1/4-20 x 1-1/2" UL, NFPA
SWDR 516 3/8" 5/16-18 x 1-1/4" UL, NFPA
SWT 15 3/8" 12-24 X 1-1/2" NFPA
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
8017925 1/2" 1/4" x 6" #14SW —
SWC 200 1/4" 5/16" x 1-1/2" #14SW —
SWC 20 3/8" 5/16" x 1-1/2" #14SW NFPA
SAMMY'S
Swivel Head™
Hangers
Complete technical specifications are available:
Contact your Sales Person or Customer Service for
more information, including Sammys® products tested
for seismic restraint
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-GST 20 Zinc Plated Steel 3/8" 1/4" x 2"
SH-GST 22SS Stainless Steel 3/8" 1/4" x 2"
SH-GST 30 Zinc Plated Steel 3/8" 1/4" x 3"
SH-GST 30SS Stainless Steel 3/8" 1/4" x 3"
8113910 #14 (Black) Nut Driver
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-DSTR 1 Zinc Plated Steel 3/8" 1/4" x 1"
SH-DSTR 1-SS Stainless Steel 3/8" 1/4" x 1"
8113910 #14 (Black) Nut Driver
For Wood and Concrete
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
Rod Screw Shank
Model No. Dia. Size & Length
SH-GST/CST 20 3/8" 1/4" x 1-3/4"
SH-GST/CST 2.0 1/2" 1/4" x 1-3/4"
8273910 #14SH Orange Nut Driver
89°
Deflection
From
Vertical
17°
Deflection
From
Vertical
17°
Deflection
From
Vertical
96 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAMMYS™ THREADED ROD ANCHORING
SAMMY XPress™ Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
XP 20 22-20 3/8" 1/4-20 x 1-1/8" UL, NFPA
XP 35 18-16 3/8" 1/4-20 x 1-1/8" UL, NFPA
XPIT Sammy X-Press Universal Installation Tool
XPDB 25/34" Drill Bit
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
SWXP 16-12 3/8" 1/4-20 x 1-1/8" UL
XPIT Sammy X-Press Universal Installation Tool
SAMMY XPress™ Sidewinder Hangers
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal at-
tachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Part Rod Pipe Test
No. Dia. Size Gauge Load
8294922 3/8" 3/4" - 2" 22 - 20 750 lbs.
8295922 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
8272957 1/2" 3/4" - 2" 22 - 20 750 lbs.
8271957 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
XPIT Sammy X-Press Universal Installation Tool
Metal Deck, Min 22 ga.
Swivels up to 89°
SAMMY Xpress
installation sequence
SAMMY Xpress
Universal Tool
SAMMY'S
SH-TEK 50
Swivel Head™
Hangers
Tested to Zone 4 Seismic Requirements
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material en-
gagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod Screw Shank
Part No. Dia. Size & Length Approvals
8268957 3/8" 12-24 x 1-5/8" UL
8270957 1/2" 12-24 x 1-5/8" UL
8273910 #14SH Orange Nut Driver
97
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Universal Installation Kit
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
Model No.
SPE139 Universal Installation Kit
Speedy Pole Tool™ & Socket
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Model No.
130 Speedy Pole Tool 6' (3' - 6')
131 Speedy Pole Tool 12' (4' - 12')
132 Speedy Pole Tool 18' (6' - 18')
133 Speedy Pole Tool 24' (8' - 24')
138 SAMMYS™ Socket Driver
3004 Ceiling Wire Socket Driver
SAMMYS™ INSTALLATION ACCESSORIES
Wood/Concrete Installation Kit for SAMMY'S and
SAMMY SIDEWINDERS
Saves Time and Money… Convenient… Easy to Use!
• Concrete/Wood Installation Kit includes 1/4" Drill Bit, 1/4" SDS Drill Bit, 7/32"
Wood Bit, Sleeve, 1/4" Bit Receiver, #14 Nut Driver, #14SW Nut Driver.
Part No.
8122910 Concrete/Wood Installation Kit
Kit Includes the Following Items
8113910 #14 Black Nut Driver (b)
8114910 #14 SW Red Nut Driver (c)
8116910 #250 Bit (1/4") (d)
8117910 SDS Bit (1/4") (e)
8118910 7/32" Wood Bit (f)
8120910 HEX 250 Bit Receiver (g)
8098910 SL 250 Sleeve (h)
Not Included in Kit
8121910 SDS B250 Bit Receiver (1/4")
SAMMY'S
SAMMY'S X-Press It®
Universal Installation Tool
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
Part No.
8194910 UXPIT Universal
X-Press It Tool
8195910 Retro Socket for
8151910 (Old Tool)
8152910 25/64" Drill Bit
Rotary Hammer Drill Into Concrete Hammer Drill Into Concrete
SAMMY'S Nut Drivers
• #14 (Black) Nut Driver, for use with SAM-
MYS™ & Swivel Head™ SAMMYS™. (See
individual SAMMY'S Listing for correct
Nut Driver).
Part No.
8113910 #14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with
Sidewinders and 1/2" rod SAMMY'S. (See
individual SAMMY'S Listing for correct
Nut Driver).
Part No.
8114910 #14SW (Red) Nut Driver
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes
into contact with the material you are installing
into, continue drilling until nut driver spins free.
Installation is then complete.
#14SW
#14
98 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Steel Vertical Hanger
Steel Side Hanger
Wood Vertical Hanger
Wood Side Hanger
Concrete Vertical Hanger
Vertigo™
Rod Hanging Systems
One-piece, all-steel threaded fastening
system for suspending steel threaded
rod vertically overhead in pipe-hanging,
fire protection, electrical conduit and
cable tray applications.
Anchor Materials:
Zinc Plated Carbon Steel
Size Range:
¼" to ½" Threaded Rod
Suitable Base Materials:
Steel Purlins & Beams, Wood & Timber,
Concrete, Hollow Plank Concrete
VERTIGO™ THREADED ROD ANCHORING
Installation Accessories
Universal Steel
& Wood Socket
Concrete Socket
1/4", 3/8" or 1/2"
Drive Sockets
• 500 - 1500 RPM
• Universal socket: color-coded Red,
Concrete socket: color-coded Blue.
Part Std
No. Box
7187 Universal Steel &
Wood Socket 5
7195 1/4" Concrete Socket 5
7197 3/8" Concrete Socket 5
7198 1/2" Concrete Socket 5
Pole Tool
• Pole Tool extends reach 6' to 12'. Includes three Jaw Chuck
Part No. Std. Box
7166 Pole Tool 1
Vertigo™ Tool Kit #5864
• Sleeve assembly, (same as cat.
#5874) 1/4" and 3/8" blue concrete
drive sockets and red universal drive
socket. (SDS Drill bit not included).
Part Std
No. Box
#5864 1/4" x 6" Hex Shank 1
SDS Drill Bit
#5874 Sleeve Assembly only 1
Steel Vertical Hanger (#3 for Purlins, #5 for
Beams - Packaged 100/box
Part Rod Screw Shank Point
No. Dia. Size & Length Style
7155 1/4" 1/4"-20 x 1" #3
7157 3/8" 1/4"-20 x 2" #3
7158 3/8" 1/4"-20 x 1" (w/nut) #3
7159 3/8" 1/4"-20 x 1-1/2" #3
7160 3/8" 1/4"-20 x 1-1/2" (w/nut) #3
7152 1/4" 12-24 x 1-1/2" #5
7154 3/8" 12-24 x 1-1/2" (w/nut) #5
7161 1/2" 12-24 x 1-1/2" (w/nut) #5
Steel Side Hanger (#3 for Purlins, #5 for Beams)
- Packaged 100/box
Part Rod Screw Shank Point
No. Dia. Size & Length Style
7183 1/4" 1/4"-20 x 1" #3
7184 3/8" 1/4"-20 x 1" (w/nut) #3
7186 3/8" 1/4"-20 x 1-1/2" #3
7188 3/8" 1/4"-20 x 1-1/2" (w/nut) #3
7200 1/4" 12-24 x 1-1/2" #5
7201 3/8" 12-24 x 1-1/2" (w/nut) #5
Wood Vertical Hanger- Packaged 100/box
Part Rod Screw Shank Point
No. Dia. Size & Length Style
7163 1/4" 1/4" x 2" Type 17
7203 3/8" 1/4" x 1" Type 17
7165 3/8" 1/4" x 2" Type 17
7167 3/8" 1/4" x 3" Type 17
7169 3/8" 1/4" x 4" Type 17
7162 3/8" 3/8" x 2-1/2" Type 17
7164 1/2" 3/8" x 2-1/2" Type 17
Wood Side Hanger- Packaged 100/box
Part Rod Screw Shank Point
No. Dia. Size & Length Style
7185 1/4" 1/4" x 1" Type 17
7205 3/8" 1/4" x 1" Type 17
7170 3/8" 1/4" x 2" Type 17
7156 3/8" 1/4" x 2-1/2" Type 17
Concrete Vertical Hanger
For side mount concrete applications use Catalog No.
7185 and 7170 with a 1/4" ANSI Drill Bit
Part Rod Screw Shank Point
No. Dia. Size & Length Style
7171 1/4" 1/4" x 1-1/4" Wedge
7173 3/8" 1/4" x 1-1/2" Bolt
7175 1/2" 3/8" x 2-3/4" OT
Concrete Vertigo+
Reliable performance in cracked or uncracked concrete.
Yellow Dichromate finish, Wedge-Bolt Blue Tipped Point.
Requires use of Wedge-Bit (included) for installation.
Part No. Rod Dia. Screw Shank
Size & Length Point Style
7180SD 1/4" 1/4" x 1-1/4" Wedge-Bolt
Blue-Tip
7181SD 3/8" 1/4" x 1-1/2"
7182SD 1/2" 3/8" x 2-3/4"
7198 1/2" Driver socket for Vertigo+
Sleeve
Assembly
(5874)
1/4" & 3/8" Blue
Concrete Driver
Red
Universal
Driver
100 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TAPCON® SCREW ANCHOR
Tapcon SDS Bits
Part No. Description
790059 7" (for use with 3⁄
16" Tapcon)
7901060 5" (for use with ¼" Tapcon)
7901059 7" (for use with ¼" Tapcon)
Carbon Steel Tapcon® Screw Anchors Selection Guide
Hex Head Phillips Size Fixture Bit Tapcon
Part No. Part No. (Inch) Thickness Length Drill Bit
HW3-114 PF3-114 3/16 x 1-1/4 0"-1/4" 3-1/2" 7900814
HW3-134 PF3-134 3/16 x 1-3/4 1/4"-3/4" 3-1/2" 7900814
HW3-214 PF3-214 3/16 x 2-1/4 3/4"-1-1/4" 4-1/2" 7900818
HW3-234 PF3-234 3/16 x 2-3/4 1-1/4"-3-1/4" 4-1/2" 7900818
HW3-314 PF3-314 3/16 x 3-1/4 1-3/4"-2-1/4" 5-1/2" 7900822
HW4-114 PF4-114 1/4 x 1-1/4 0"-1/4" 3-1/2" 7901014
HW4-134 PF4-134 1/4 x 1-3/4 1/4"-3/4" 3-1/2" 7901014
HW4-214 PF4-214 1/4 x 2-1/4 3/4"-1-1/4" 4-1/2" 7901018
HW4-234 PF4-234 1/4 x 2-3/4 1-1/4"-3-1/4" 4-1/2" 7901018
HW4-314 PF4-314 1/4 x 3-1/4 1-3/4"-2-1/4" 5-1/2" 7901022
HW4-334 PF4-334 1/4 x 3-3/4 2-1/4"-2-3/4" 5-1/2" 7901022
HW4-400 PF4-400 1/4 x 4 2-1/2"-3" 5-1/2" 7901022
HW4-500 PF4-500 1/4 x 5 3-1/2"-4" 6-1/2" 7901026
HW4-600 PF4-600 1/4 x 6 4-1/2"-5" 7-1/2" 7901030
Stainless Steel Tapcon® Screw Anchors Selection Guide
Hex Head Phillips Size Fixture Bit Tapcon
Part No. Part No. (Inch) Thickness Length Drill Bit
SHW4-114 SPF4-114 1/4 x 1-1/4 0"-1/4" 3-1/2" 7901014
SHW4-134 SPF4-134 1/4 x 1-3/4 1/4"-3/4" 3-1/2" 7901014
SHW4-214 SPF4-214 1/4 x 2-1/4 3/4"-1-1/4" 4-1/2" 7901018
SHW4-234 SPF4-234 1/4 x 2-3/4 1-1/4"-3-1/4" 4-1/2" 7901018
SHW4-314 SPF4-314 1/4 x 3-1/4 1-3/4"-2-1/4" 5-1/2" 7901022
SHW4-334 SPF4-334 1/4 x 3-3/4 2-1/4"-2-3/4" 5-1/2" 7901022
(A)
(B)
(C)
(D)
(E)
C1000 Kit (Does not include drill bit
3/16" diameter uses a
#2 phillips flat head (PFH)
1/4" diameter uses a
#3 phillips flat head (PFH)
3/16" diameter has a 1/4" slotted hex
washer head (HWH)
1/4" diameter has a 5/16" slotted hex
washer head (HWH)
Tapcon® Screw Anchors
The "original masonry" anchor that cuts its own threads into concrete, brick, or block.
Maximum performance is achieved because the Tapcon Anchor, the Condrive Installa-
tion Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It
is essential to use the Condrive tool and the correct drill bit to assure consistent anchor
performance. Packaged 100 per box
Anchor Materials:
Carbon Steel, 410 Stainless Steel
Size Range:
3⁄
16" and ¼" diameters. 1¼" to 6 lengths
Suitable Base Materials:
Concrete, Masonry
Condrive 1000
Installation Tool
• Fast change from drilling to driving
• Eliminates need to change out chuck
and bits.
• Eliminates need for two tools.
• Special nut driver is recessed for
torque control to reduce head
breakage.
• Includes bits for all sizes hex & Phil-
lips head.
Part No.
035800 C1000 Installation Tool Kit
7901001 Drill Adapter (A)
7901002 Sleeve (B)
7901003 Black Band
7901004 5⁄
32" Ball Bearing
7901006 3⁄
16" Socket (C)
7901007 ¼" Socket (D)
7901008 #2 Phillips Bit for 3⁄
16" Anchor
7901009 #3 Phillips Bit for ¼" Anchor
7901010 Phillips Socket (E)
7902006 Set Screw
7902008 1⁄
16" Ball Bearing
7902010 1⁄
8" Hex Key
101
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TAPPER® CONCRETE SCREW ANCHORS
Tapper™ Concrete Screw Anchor
The Tapper fastening system is a complete family of screw anchors for light to
medium duty applications in concrete, masonry block and brick base materi-
als. The Tapper is fast and easy to install and provides a neat, finished appear-
ance. The Tapper screw anchor is engineered with matched tolerance drill bits
and installation tools designed to meet the needs of the user and also provide
optimum performance.
Anchor Materials:
Zinc Plated Carbon Steel, Perma-Seal Carbon Steel. Type 410 Stainless Steel, Type
304 Stainless Steel
Size Range:
3/16" diameter x 1 1/4" length to 3/8" diameter x 6" length
Suitable Base Materials:
Normal-Weight Concrete, Structural Lightweight Concrete, Grouted Concrete Ma-
sonry, Hollow Concrete Masonry, Solid Brick Masonry
Standard Pack:
100 Screws & 1
Drill Bit
Tappers - Slotted Hex Head and Phillips Flat Head
Blue
Perma-Seal
White
Perma-Seal
Silver
Perma-Seal
Bronze
(Flange Head) 304 Stainless† 410 Stainless
Size HEX PFH HEX PFH HEX PFH HEX PFH HEX PFH HEX PFH
3/16" x 1-1/4" 2700 2740 2400 2440 N/A 2498 N/A N/A N/A N/A 4180 4185
3/16" x 1-3/4" 2702 2742 2402 2442 N/A 2500 N/A N/A N/A N/A 4181 4186
3/16" x 2-1/4" 2704 2744 2404 2444 N/A 2501 N/A N/A N/A N/A 4182 4187
3/16" x 2-3/4" 2706 2746 2406 2446 N/A 2502 N/A N/A N/A N/A 4183 4188
3/16" x 3-1/4" 2708 2748 2408 2448 N/A 2503 N/A N/A N/A N/A N/A N/A
3/16" x 3-3/4" 2710 2750 2410 2450 N/A 2504 N/A N/A N/A N/A N/A N/A
3/16" x 4" 2712 2752 2412 2449 N/A 2505 N/A N/A N/A N/A N/A N/A
1/4" x 1-1/4" 2720 2760 2420 2460 2486 2506 N/A N/A 2880 2887 4110 4118
1/4" x 1-3/4" 2722 2762 2422 2462 2488 2507 9977 9972 2881 2888 4112 4120
1/4" x 2-1/4" 2724 2764 2424 2464 2490 2508 9978 9976 2882 2889 4114 4123
1/4" x 2-3/4" 2726 2766 2426 2466 2492 2509 N/A N/A 2883 2890 4116 4124
1/4" x 3-1/4" 2728 2768 2428 2468 2494 2510 N/A N/A N/A N/A N/A 4125
1/4" x 3-3/4" 2730 2770 2430 2470 2495 2511 N/A N/A N/A N/A 4119 N/A
1/4" x 4" 2732 2772 2434 2472 2496 2512 N/A N/A N/A N/A N/A N/A
1/4" x 5" N/A 2774 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
1/4" x 6" N/A 2776 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
† 304 Stainless Steel Tapper screws require the use of special Tapper Drill Bits. These bits are gold or silver colored for easy
identification. They cannot be used with Perm-Seal Tapper or the 410 Stainless Steel Tapper
Size HEX PFH
3/16" x 1-1/4" 2700SD 2740SD
3/16" x 1-3/4" 2792SD 2742SD
3/16" x 2-1/4" 2704SD 2744SD
3/16" x 2-3/4" 2706SD 2746SD
3/16" x 3-1/4" 2708SD 2748SD
3/16" x 3-3/4" 2710SD 2750SD
3/16" x 4" 2712SD 2752SD
1/4" x 1-1/4" 2720SD 2760SD
Size HEX PFH
1/4" x 1-3/4" 2722SD 2762SD
1/4" x 2-1/4" 2724SD 2764SD
1/4" x 2-3/4" 2726SD 2766SD
1/4" x 3-1/4" 2728SD 2768SD
1/4" x 3-3/4" 2730SD 2770SD
1/4" x 4" 2732SD 2772SD
1/4" x 5" 2734SD 2774SD
1/4" x 6" — 2776SD
Tapper™ + Concrete Screw
Anchor
New Strength Design Tapper Screws
feature a stronger head design, and a
gimlet point with new thread design
for lower installation torque required
to install. Improved Perma-Seal
coating provides superior corrosion
resistance.
Zinc Plated Carbon Steel
Perma-Seal Coated
410 Stainless Steel
304 Stainless Steel
Tapper + will be replacing Blue Perma-Seal Tappers. Orders for Blue Perma-Seal
Tappers will automatically be substitiuted with Tapper + as stock becomes available
102 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SPIKE® PRE-EXPANDED ANCHORS
Mushroom Head Grade 8.2 Carbon Steel SPIKE®
Part Min. Drill Std
No. Size Embed Dia. Box
5502 3/16" x 1" 7/8" 3/16" 100
5503 3/16" x 1-1/4" 7/8" 3/16" 100
5504 3/16" x 1-1/2" 1-1/4" 3/16" 100
5506 3/16" x 2" 1-1/4" 3/16" 100
5508 3/16" x 2-1/2" 1-1/4" 3/16" 100
5510 3/16" x 3" 1-1/4" 3/16" 100
5511 3/16" x 3-1/2" 1-1/4" 3/16" 100
5512 3/16" x 4" 1-1/4" 3/16" 100
5522 1/4" x 1" 7/8" 1/4" 100
5523 1/4" x 1-1/4" 1" 1/4" 100
5524 1/4" x 1-1/2" 1-1/4" 1/4" 100
5526 1/4" x 2" 1-1/4" 1/4" 100
5528 1/4" x 2-1/2" 1-1/4" 1/4" 100
5530 1/4" x 3" 1-1/4" 1/4" 100
5531 1/4" x 3-1/2" 1-1/4" 1/4" 100
5532 1/4" x 4" 1-1/4" 1/4" 100
5546 3/8" x 2" 1-3/4" 3/8" 25
5548 3/8" x 2-1/2" 1-3/4" 3/8" 25
5550 3/8" x 3" 1-3/4" 3/8" 25
5551 3/8" x 3-1/2" 1-3/4" 3/8" 25
5552 3/8" x 4" 1-3/4" 3/8" 25
5554 3/8" x 5" 1-3/4" 3/8" 25
5556 3/8" x 6" 1-3/4" 3/8" 25
5569 1/2" x 2-3/4" 2-1/2" 1/2" 25
5571 1/2" x 3-1/2" 2-1/2" 1/2" 25
5572 1/2" x 4" 2-1/2" 1/2" 25
5574 1/2" x 5" 2-1/2" 1/2" 25
5577 1/2" x 6-1/2" 2-1/2" 1/2" 25
The published length is measured from below the head to the
end of the anchor
SPIKE® Pre-Expanded Anchor
A one-piece, tamper-proof vibration resistant anchor for
use in concrete, block, brick or stone. The SPIKE® anchor is
formed with an "s" shaped configuration at the working end
of the anchor to create an expansion mechanism. Since the
anchor is pre-expanded, there is no secondary tightening
operation required.
Anchor Materials:
Carbon Steel and Type 316 Stainless Steel
Size Range:
3/16" x 1" to 1/2" x 6-1/2"
Suitable Base Materials:
Concrete, Block, Brick, Stone
Flat Head Grade 8.2 Carbon Steel SPIKE®
Part Min. Drill Std
No. Size Embed Dia. Box
5608 3/16" x 2-1/2" 1-1/4" 3/16" 100
5610 3/16" x 3" 1-1/4" 3/16" 100
5612 3/16" x 4" 1-1/4" 3/16" 100
5624 1/4" x 1-1/2" 1-1/4" 1/4" 100
5626 1/4" x 2" 1-1/4" 1/4" 100
5628 1/4" x 2-1/2" 1-1/4" 1/4" 100
5630 1/4" x 3" 1-1/4" 1/4" 100
5631 1/4" x 3-1/2" 1-1/4" 1/4" 100
5632 1/4" x 4" 1-1/4" 1/4" 100
The published length is the overall length of the anchor
Mushroom Head Type 316 Stainless Steel SPIKE®
Part Min. Drill Std
No. Size Embed Dia. Box
6602 3/16" x 1" 7/8" 3/16" 100
6603 3/16" x 1-1/4" 7/8" 3/16" 100
6604 3/16" x 1-1/2" 1-1/4" 3/16" 100
6606 3/16" x 2" 1-1/4" 3/16" 100
6623 1/4" x 1-1/4" 1" 1/4" 100
6624 1/4" x 1-1/2" 1-1/4" 1/4" 100
6626 1/4" x 2" 1-1/4" 1/4" 100
6628 1/4" x 2-1/2" 1-1/4" 1/4" 100
6630 1/4" x 3" 1-1/4" 1/4" 100
6646 3/8" x 2" 1-3/4" 3/8" 25
6648 3/8" x 2-1/2" 1-3/4" 3/8" 25
6650 3/8" x 3" 1-3/4" 3/8" 25
SPIKE® Driver
Part No. Description Guide I.D.
3790 SPIKE® Driver 1000 1/2"
3791 SPIKE® Driver 2000 1/2"
Pipe SPIKE® Setting Tool
Part No. Description Guide I.D.
3760 Pipe SPIKE® Setting Tool 5/16"
SPIKE™ Installation Tools
Tools allow SPIKE® anchors to be installed in confined areas
and prevent damage to the fixture from stray hammer blows.
Tie-Wire SPIKE®
Part Anchor Drill Min. Std
No. Size Diameter Embed. Box
3756 3/16" 3/16" 1-1/4" 100
3759 1/4" 1/4" 1-1/4" 100
Setting Tool SPIKE® Driver
103
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ZAMAC/NYLON NAILIN™ ANCHORS
Zamac Nailin® Anchor
A tamper-proof nail drive anchor which
has a body formed from Zamac alloy.
Nails are available in carbon or stain-
less steel. The anchor may be used in
concrete block, brick or stone. Not rec-
ommended for overhead applications.
Packaged 100/box. Master packs of
1000 also available.
Anchor Materials:
Zamac Alloy with Carbon or Stainless
Steel Drive Pin
Size Range:
3/16" x 7/8" to 1/4" x 2"; Drill diameter
is same as anchor diameter.
Suitable Base Materials:
Concrete, Block, Brick, Stone
Zamac Nailin® Anchor Mushroom
Head with Carbon Steel Nail
Part No. Size
2802 3/16" x 7/8"
2806 1/4" x 3/4"
2808 1/4" x 1"
2814 1/4" x 1-1/4"
2820 1/4" x 1-1/2"
2826 1/4" x 2"
2804 1/4" x 3"
Zamac Nailin® Anchor Flat Head with
Carbon Steel Nail
Part No. Size
2836 1/4" x 1-1/2"
2838 1/4" x 2"
Zamac Nailin® Anchor Mushroom
Head with Stainless Steel Nail
Part No. Size
2858 1/4" x 1"
2864 1/4" x 1-1/4"
2870 1/4" x 1-1/2"
2876 1/4" x 2"
Nylon Nailin® Anchor
Body is formed from engineered nylon
and nails available in carbon and stain-
less steel. The anchor may be used in
concrete block or brick. Not recom-
mended for overhead applications.
Packaged 100/box.
Anchor Materials:
Engineered Nylon with Carbon or
Stainless Steel Drive Pin
Size Range:
3/16" x 1" to 1/4" x 6"; Drill diameter is
same as anchor diameter.
Suitable Base Materials:
Concrete, Block, Brick
Nylon Nailin® Anchor Round Head
with Carbon Steel Nail
Part No. Size
2431 3/16" x 1"
2451 3/16" x 1-1/2"
2808 1/4" x 1"
2820 1/4" x 1-1/2"
Nylon Nailin® Anchor Flat Head with
Carbon Steel Nail
Part No. Size
2836 1/4" x 1-1/2"
2838 1/4" x 2"
Nylon Nailin® Anchor Mushroom
Head with Carbon Steel Nail
Part No. Size
2433 3/16" x 1"
2513 1/4" x 3/4"
2523 1/4" x 1"
2543 1/4" x 1-1/2"
2563 1/4" x 2"
2573 1/4" x 3"
2583 1/4" x 4"
2593 1/4" x 6"
Nylon Nailin® Anchor Mushroom
Head with Stainless Steel Nail
Part No. Size
2523 1/4" x 1"
2543 1/4" x 1-1/2"
Zamac Hammer-Screw®
Nail Anchor
Unique one-step drive anchor featuring
a Phillips style head and a screw thread
for use in concrete block, brick or stone.
Body is formed from corrosion resistant
Zamac alloy with carbon or stainless
steel drive screw and has been devel-
oped as an improvement over standard
nailin anchors. The anchor is removable,
has a 40% higher tension load capacity
when installed in concrete. Packaged
100/box. Master packs of 1000 also
available.
Anchor Materials:
Zamac Alloy with Carbon Steel and
Perma-Seal Drive Screw
Size Range:
1/4" x 3/4" to 1/4" x 3"; 1/4" Drill Dia.
Suitable Base Materials:
Concrete, Block, Brick, Stone
Zamac Hammers-Screw® Anchor
Mushroom Head with #2 Phillips
Type Carbon Steel Screw
Part No. Size
2839 1/4" x 3/4"
2840 1/4" x 1"
2842 1/4" x 1-1/4"
2844 1/4" x 1-1/2"
2846 1/4" x 2"
2848 1/4" x 2-1/4"
2850 1/4" x 3"
Zamac Hammers-Screw® Anchor
Mushroom Head with #2 Phillips
Type Screw
Part No. Size
2842 1/4" x 1-1/4"
104 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAFE-T+ PIN / EXPANSION SHIELD ANCHORS
Part Thread Drill Std
No. Size Length Length Dia. Box
1051 1/4" Short 1/2" 1" 1/2" 50
1055 1/4" Long 1" 1-1/2" 1/2" 50
1101 5/16" Short 3/4" 1-1/4" 1/2" 50
1105 5/16" Long 1" 1-3/4" 1/2" 50
1151 3/8" Short 1" 1-3/4" 5/8" 50
1155 3/8" Long 1-1/2" 2-1/2" 5/8" 50
1201 1/2" Short 1-1/8" 2" 3/4" 50
1205 1/2" Long 1-7/8" 3" 3/4" 50
1251 5/8" Short 1" 2" 7/8" 25
1255 5/8" Long 2-1/4" 3-1/2" 7/8" 25
1301 3/4" Short 1-1/8" 2" 1" 25
1355 3/4" Long 2-1/4" 3-1/2" 1" 25
Part Rod/Anchor Drill Overall Thread Std.
No. Dia. Dia. Length Depth Box
9510 1/4" 1/2" 1-3/8" 1-1/4" 50
9515 5/16" 5/8" 1-5/8" 1-1/2" 50
9520 3/8" 3/4" 2" 1-3/4" 50
9525 1/2" 7/8" 2-1/2" 2-1/4" 25
9530 5/8" 1" 3-3/4" 2-1/2" 25
9535 3/4" 1-1/4" 3-15/16" 2-1/2" 10
Part Rod/Anchor Drill Overall Thread Std.
No. Dia. Dia. Length Depth Box
9650 1/4" 1/2" 1-3/8" 1-3/8" 50
9655 5/16" 5/8" 1-5/8" 1-5/8" 50
9665 3/8" 5/8" 1-5/8" 1-3/4" 50
9675 1/2" 7/8" 2-1/2" 2-1/4" 25
9685 5/8" 1" 2-3/4" 2-1/2" 25
9695 3/4" 1-1/4" 2-7/8" 2-1/2" 10
Lag Shield™ Shell Expansion Anchor
A screw style anchor designed for use with lag bolts. Suitable
for use in concrete and the mortar joints of block or brick
walls. In harder masonry materials, short style Lag Shields
are used to reduce drilling time. The long style version is used
in soft or weak masonry to better develop strength.
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
Single™ Shell Expansion Anchors
A machine bolt anchor designed for use in concrete, block,
brick or stone. Consisting of a pre-assembled set of expan-
sion shields and an expander cone formed of Zamac Alloy. As
the anchor is tightened, the wedge shaped cone is drawn into
the shields, compressing them against the base material. Not
recommended for use in overhead applications.
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
Double™ Shell Expansion Anchors
A dual expansion machine bolt anchor particularly suited for
materials of questionable strength. It can be used in solid con-
crete, block, brick and stone. Job site tests are recommended
when used in base materials of questionable strength.
Anchor Materials:
Zamac Alloy
Size Range:
1/4" - 3/4" Diameter
Suitable Base Materials:
Concrete, Hollow Concrete and Masonry
Safe-T+ Pin
A one-piece, all steel, nail drive anchor that can be used
in concrete, block, brick or stone. Each box of Safe-T Pins
comes with a 6 mm SDS Carbide drill bit for ease of installa-
tion. Typical applications include HVAC Duct straps, light to
medium duty signage, and termination bar, flooring ECT.
Anchor Materials:
Carbon Steel
Size Range:
1/4" x 1-3/4", 1/4" x 2-1/2"
Suitable Base Materials:
Concrete, Block, Brick and Stone
Part No. Size Std. Box
2800SD 6mm (1/4") x 1-3/8" 100
2801SD 6mm (1/4") x 2-1/2"" 100
2800 6 mm SDS Drill Bit
105
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HOLLOW-SET™ DROPIN™ ANCHORS
Scru-Lead™ Wall Anchor
For use with sheet metal or wood screws in concrete, block, or
brick. This product relies upon the integrity of the base mate-
rial. Recommended for light duty applications where holding
power is not a critical factor and should not be used overhead.
Anchor Materials: Suitable Base Materials:
Lead Alloy Concrete, Block and Brick
Part Expansive
No. Description Belt Size
866 Screw Anchor Expander #10 - 24
868 Screw Anchor Expander 1/4" - 20
870 Screw Anchor Expander 3/8" - 16
4451AV Anchor Screw for 866
4457AV Anchor Screw for 868
4717AV Anchor Screw for 870
1125GB Roll Pin 1/4" x 1-1/8"
Screw Anchor Expanders
for Caulking Anchors
Quickly and securely set expansive
screw anchors in masonry, regard-
less of thickness.
Calk-In™ Machine Screw Anchor
A pre-assembled precision cast calking type machine bolt
anchor which can be used in concrete, block, brick or
stone. Not recommended for overhead applications.
Anchor Materials:
Antimonial Lead Alloy Anchor Body and Zamac Alloy Cone
Suitable Base Materials:
Concrete, Hollow Concrete and Brick Masonry
Calk-In™ Machine Screw
Anchor
Part
No. Size
Min. Hole
Depth Drill Dia Std. Box
9205 #8-32 1/2" 5/16" 100
9210 #10-24 5/8" 3/8" 100
9220 1/4"-20 7/8" 1/2" 100
9225 5/16"-18 1" 5/8" 50
9230 3/8"-16 1-1/4" 3/4" 50
9240 1/2"-13 1-1/4" 3/4" 50
Setting Tool
Part No.: 9211 9222 9226 9231 9241
Anchor Size: #10 1/4" 5/16" 3/8" 1/2"
Scru-Lead Wall
Anchor
PartNo. Size Min. Depth Drill Dia Std. Box
9409 6-8 x 3/4" 3/4" 1/4" 100
9414 6-8 x 1" 1" 1/4" 100
9419 6-8 x 1-1/2" 1-1/2" 1/4" 100
9429 10-14 x 1" 1" 5/16" 100
9439 10-14 x 1-1/2" 1-1/2" 5/16" 100
9460 16-18 x 1-1/2" 1-1/2" 3/8" 25
Part No. Size
9323 1/4"
9333 5/16"
9343 3/8"
9353 1/2"
9363 5/8"
for Hollow Base Materials
Hollow-Set™
Internally Threaded Expansion Anchors
Designed for anchoring hollow base materials such as
hollow concrete block, brick with weep holes and hollow
core pre-cast concrete plank. It may also be used in solid
materials. May be installed flush or below base material
surface. Qualified for seismic and wind loads.
Suitable Base Materials:
Concrete, Pre-Cast Hollow Core Plank, Hollow Concrete
and Brick Masonry
Hollow-Set Dropin with
Carbon Steel Cone
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Sleeve
Depth
Std.
Box
9320 1/4" 3/8" 7/8" 5/8" 100
9330 5/16" 5/8" 1-5/16" 5/16" 50
9340 3/8" 58" 1-5/16" 15/16" 50
9350 1/2" 3/4" 1-3/4" 1-1/4" 50
9360 5/8" 1" 2" 1-1/2" 25
Hollow-Set Dropin with Stainless Steel Cone
Part
No.
Rod/Anchor
Dia.
Drill
Dia.
Overall
Length
Thread
Depth
Std.
Box
9420 1/4" 3/8" 7/8" 5/8" 100
9440 3/8" 5/8" 1-5/16" 15/16" 100
Setting Tool (Solid Base Materials)
Part No.: 9322 9342 9352 9362
Anchor Size: 1/4" 5/16" & 3/8" 1/2" 5/8"
Hollowset Dropins™
106 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Part No. Size Drill Dia. Std. Box
4038 1/8" x 3" 3/8" 50
Part No. Size Drill Dia. Std. Box
4132 3/16" x 3" 1/2" 50
4142 3/16" x 4" 1/2" 50
4232 1/4" x 3" 5/8" 50
Part No. Size Drill Dia. Std. Box
4000 1/8" 3/8" 100
4020 3/16" 1/2" 100
4220 1/4" 5/8" 100
4330 5/16" 7/8" 50
4430 3/8" 7/8" 50
4540 1/2" 1-1/4" 25
Part No. Size Drill Dia. Std. Box
4247 1/4" x 4" 5/8" 100
4257 1/4" x 5" 5/8" 100
TOGGLE BOLTS
Toggle
Bolts
Toggle
Wings
Only
Toggle
Bolts
Slotted Hex Head
Flat Head
Tie-Wire
Acoustical Toggle
Part No. Size Drill Dia. Std. Box
4021 1/8" x 2" 3/8" 50
4031 1/8" x 3" 3/8" 50
4041 1/8" x 4" 3/8" 50
4131 3/16" x 3" 1/2" 50
4141 3/16" x 4" 1/2" 50
4151 3/16" x 5" 1/2" 50
4161 3/16" x 6" 1/2" 50
4231 1/4" x 3" 5/8" 50
4241 1/4" x 4" 5/8" 50
4251 1/4" x 5" 5/8" 50
4261 1/4" x 6" 5/8" 50
4431 3/8" x 3" 7/8" 25
4441 3/8" x 4" 7/8" 25
4451 3/8" x 5" 7/8" 25
4461 3/8" x 6" 7/8" 25
4541 1/2" x 4" 1-1/4" 25
Combo
Round Head
Combo
Mushroom Head
Part No. Size Drill Dia. Std. Box
4023 1/8" x 2" 3/8" 50
4033 1/8" x 3" 3/8" 50
4043 1/8" x 4" 3/8" 50
4133 3/16" x 3" 1/2" 50
4143 3/16" x 4" 1/2" 50
4233 1/4" x 3" 5/8" 50
4243 1/4" x 4" 5/8" 50
Toggle Bolt Hollow Wall Anchors
A spring wing type hollow wall anchor designed for use in
block, wallboard and other hollow base materials. Two-part
assembly consisting of a machine screw and a spring wing
toggle.
Anchor Materials:
Carbon Steel
Size Range:
1/8" x 2" to 1/2" x 6"
Suitable Base Materials:
Hollow Block, Wallboard, Plaster
107
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WALL DOG LIGHT™ DUTY ANCHORS
Combo Hex Washer Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2265 1-1/4" Combo HWH Chrome 100
Robertson Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2266 1-1/4" Chrome Robertson Head 100
Phillips Oval Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2314 1-1/4" Zinc Oval Head 100
2328 1-1/4" White Oval Head 100
2388 1-1/4" Black Oval Head 100
2292 1-1/4" Brass Oval Head 100
Wall-Dog™ Universal Light-Duty Anchor
One-piece screw anchor with high-profile threads for easy
fastening into wallboard and other masonry base materi-
als. The deep-cutting, corkscrew threads provide for smooth
entry and a powerful hold.
Anchor Materials:
Case Hardened Steel
Size Range:
3/16" dia. x 2-1/2" length
Suitable Base Materials:
Wallboard, Plywood, Concrete, Hollow or Grout-filled
Block, Brick, Plaster, Wood or Masonry
NEW
HEAD
STYLES
Phillips Pan Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2316 1-1/4" Zinc Pan Head 100
2330 1-1/4" White Pan Head 100
2286 1-1/4" Black Pan Head 100
2294 1-1/4" Brass Pan Head 100
2273 1-1/2" White Pan Head 100
2274 1-1/2" Bronze Pan Head 100
2275 1-1/2" Zinc Pan Head 100
2276 1-1/2" Black Phosphate Pan Head 100
Phillips Wafer Head Wall-Dog™ Light Duty Anchor
Part No. Description Std. Box
2277 1/4" x 1-1/2" White Wafer Head 100
2278 1/4" x 2" White Wafer Head 100
2279 1/4" x 2-1/4" White Wafer Head 100
2280 1/4" x 2-1/2" White Wafer Head 100
Wall-Dog™ Kit (includes 50 Chrome Pan Head Anchors)
Part No. Description
2316 Wall-Dog Kit with (1) Phillips Screwdriver
2330 Wall-Dog Kit with 3/16" straight shank bit
108 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HOLLOW WALL ANCHORS
Nylon Zip-it™ Wallboard Anchor
Part No. Description Std. Box
2345 Standard Box, no screws 100
2348 Standard Box, #8 x 1" screws 100
Zinc Zip-It™ Wallboard Anchor
Part No. Description Std. Box
2346 Standard Box, no screws 100
2349 Standard Box, #8 x 1" screws 100
Zip-It™ Kits
Part No. Description
2368 Nylon Zip-It™ Kit, includes 50 anchors,
#8 x 1" screws & #2 Phillips Driver Bit
2369 Zinc Zip-It™ Kit, includes 50 anchors,
#8 x 1" screws & #2 Phillips Driver Bit
Nylon Zip-it™ Jr. Wallboard Anchor
Part No. Description Std. Box
2345 Standard Box, #6 x 1" screws 100
Zip-It™ Wallboard Anchor
A one-piece self-drilling anchor designed for use in hollow
gypsum wallboard for light duty loads. Available in both
engineered nylon and Zamac alloy for use with either a #6 or
#8 screws in 3/8" to 1" wallboard. The Zip-It™ Jr. is formed
from engineered nylon for use with #6 screws in 3/8" to 5/8"
wallboard.
Anchor Materials:
Engineered Nylon or Zamac alloy
Size Range:
Use with #6 or #8 screw
Suitable Base Materials:
Wallboard
Zinc Zip-Toggle® Hollow Wall Anchor
A hollow gypsum wallboard anchor designed designed to pro-
vide superior performance without the need to pre-drill larger
diameter hole. Packaged with it's own #6 x 2" lubricated
screw for 3/8" to 5/8" wallboard..
Anchor Materials: Size Range:
Zamac Alloy Use with #6 x 2" screw
Suitable Base Materials: Wallboard
Part No. Description Std. Box
2295 Metal Zip-Toggle with screws 50
Zip-All™ Wallboard Anchor
A one-piece self-drilling anchor designed for use in hollow
gypsum wallboard or wood for light duty loads. For use with
either a #6 or #8 screws in 3/8" to 1" wallboard.
Anchor Materials: Size Range:
Zamac alloy Use with #6 or #8 screw
Suitable Base Materials: Wallboard, Wood
Part No. Description Std. Box
2296 Zinc, no screws 100
2349 Zinc, with screws 100
E-Z Ancor™ Self-Drilling Drywall Anchors
The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in
gypsum wallboard. Available in zinc or high strength engineered plastic (non-conductive). Ideal
anchor for 3/8", 1/2" and 5/8" gypsum wallboard.
Part No. Description Std. Box
EZ100 Zinc E-Z Anchor 100
EZPPL100 Plastic E-Z Anchor 100
EZ25 E-Z Anchor Starter Kit 100
EZ25 Starter
Kit contains 25
Zinc anchors
and 25 Screws
109
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HOLLOW WALL ANCHORS
Part Drill Min. Std
No. Size Dia. Depth Box
7559 6-8 x 3/4" 3/16" 3/4" 100
7569 8-10 x 7/8" 3/16" 7/8" 100
7579 10-12 x 1" 1/4" 1" 100
7589 14-16 x 1-1/2" 5/16" 1-1/2" 100
Bantam Plug™ Plastic Wall Anchor
Designed for use with lightweight fixtures with a sheet metal
or wood screw. Not for overhead use.
Anchor Materials:
Plastic
Size Range:
#6-#8 x 3/4" to #14-#16 x 1-1/2"
Suitable Base Materials:
Concrete, Block, Brick, Wallboard
Part No. Anchor Size Screw Size
6K PAK #6-#8 #6 x 1"
8K PAK #8-#10 #8-1"
10K PAK #10-#12 #10 x 1-1-1/2"
14K PAK #14-#16 #14 x 2"
Plastic Conical Anchor Kits
Designed for use with lightweight fixtures with a sheet metal
or wood screw. Not for overhead use. Kits include 100-pc.
Combination Phillips/Slot Pan head sheet metal screws and
100-pc conical anchors.
Sharkie Plastic Wall Anchor
One piece plastic wall anchor designed for light duty applica-
tions in wallboard, concrete and masonry. Works in hollow or
solid based materials and is suitable for screws with various
thread sizes and styles.
Anchor Materials:
Plastic
Size Range:
#4 x 1" to #14 x 1-9/16" screw
Suitable Base Materials:
Concrete, Block, Brick, Wallboard
Part No. Description Std. Box
7580 Sharkie Anchor Flange #4-#10 100
7582 Sharkie Anchor Flange #6-#12 100
7584 Sharkie Anchor Flange #8-#14 100
LEGS Wallboard Anchor
A fast, easy-to-use expansion anchor designed for use in wall-
board. Features a pierce point, requiring no-drilling. Removal
of anchor, if required, is easy. Once removed, the anchor
leaves a small slit in the wallboard.
Anchor Materials: Size Range:
Carbon Steel Use with #6 or #8 screw
Suitable Base Materials: Wallboard
Part No. Description Std. Box
2336 LEGS® Wallboard Anchor 100
2349 LEGS® Wallboard Anchor, w/ #8 x 1" screw 100
Toggler® Hollow Wall Anchor
Ideal for static applications requirinq a light to medium load performance. Installation
is quick, requiring only a 5/16" hole. Not recommended for use overhead or applica-
tions where holding values are critical.
Anchor Materials: Size Range:
Plastic Grip Range from 1/8" to 1-1/2".
Suitable Base Materials:
Gypsum Wallboard, Plaster, Plywood & some Hollow Masonry
Part Grip Std
No. Description Range Box
TA Small Toggler 1/8" to 1/4" 100
TB Medium Toggler 3/8" to 1/2" 100
TC Large Toggler 5/8" to 3/4" 100
TD X-Large 1-1/2" 100
110 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HOLLOW WALL ANCHORS
Strap-Toggle™ Hollow Wall Anchor
A pre-assembled anchor consisting of a carbon steel wing and
a locking cap/ratchet leg assembly molded from engineered
plastic. When compared to traditional toggles, this anchor
can be installed through a smaller hole and does not require
a fixture or screw to set it.
Anchor Materials:
Carbon Steel/Engineered Plastic
Size Range:
3/16" x 4" to 1/2" x 4"
Suitable Base Materials:
Hollow Wallboard or Hollow Brick
Part Drill Wall Std
No. Size Dia. Thickness Box
4052 3/16" x 4" 1/2" 2-1/2" 50
4054 1/4" x 4" 1/2" 2-1/2" 50
4056 3/8" x 4" 3/4" 2-1/2" 25
4058 1/2" x 4" 3/4" 2-1/2" 25
Polly™ Hollow Wall Anchor
A sleeve type hollow wall anchor designed for use in base
materials such as plaster, wallboard, concrete block, hollow
tile or plywood.
Anchor Materials:
Carbon Steel
Size Range:
1/8" Extra Short to 1/4" Long
Suitable Base Materials:
Plaster, Wallboard, Concrete Block, Hollow Tile, Plywood
Combination Slotted Phillips Head Polly™
Part Screw Drill Wall Std
No. Size Length Dia. Thk Box
2100 1/8" X Short 1-1/16" 5/16" 1/8"-1/4" 100
2101 1/8" Short 1-3/4" 5/16" 3/8"-1/2" 100
2102 1/8" Long" 2-1/4" 5/16" 5/8"-1" 100
2111 3/16" Short 2" 3/8" 3/8"-5/8" 50
2112 3/16" Long 2-1/2" 3/8" 3/4"-1-1/8" 50
2113 3/16" X Long 3" 3/8" 1-1/4"-1-3/4" 25
2121 1/4" Small 2-1/4" 7/16" 3/8-1/2" 50
2122 1/4" Long 2-3/4" 7/16" 5/8"-1-1/4" 50
Slotted Hex Head Polly™
Part Screw Drill Wall Std
No. Size Length Dia. Thk Box
2105 1/8" Short 1-3/4" 5/16" 3/8"-1/2" 100
Drive Polly™
Part Screw Drill Wall Std
No. Size Length Dia. Thk Box
2182 1/8" Short 1-3/4" 5/16" 3/8"-1/2" 100
2184 1/8" Long" 2-1/4" 5/16" 5/8"-1" 100
Polly™ Setting Tool (Fits All Sizes)
Part Screw Drill Wall Std
No. Size Length Dia. Thk Box
2840 1/8" Short 1-3/4" 5/16" 3/8"-1/2" 100
Polly™ Setting Tool
For faster setting, use the Polly setting tool. Back screw head
out 2-3 turns, slide the tool behind the screw head, then
squeeze the tool to expand the Polly. This tool fits all sizes.
Part No. Description
2150 Polly Setting Tool
111
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
AUTOMATIC GAS FASTENING SYSTEMS
Two LABOR SAVING Choices
For ELECTRICAL/MECHANICAL Contractors
NO LICENSE
REQUIRED
no special training
QUIET
work in tenant
occupied buildings
Advantages
• Includes 2 batteries, charger & carrying case
• Sets the standard for single-shot applications
• Replaces the need for tools like the DX35
• Reduced operator fatigue
• Reduced installation costs -- up to 75%
Part No. Description
T3SS Tool, 2 batteries, charger, carrying case
B0092 Rechargeable Battery
B0022 Battery Charger
T3FUEL Fuel Cell, 2-pack
T3SS
Single Pin Tool
Trak-It® C3 Stick-E
Magazine Style Short Track Tool
Advantages
• Magazine "short" track
• Special STICK-E accessories for most Electrical/
Mechanical applications
• Reduced installation costs
• Reduced operator fatigue
• Fasten directly thru the fixture with pins and
STICK-E accessories
• STICK-E accessories are compatible with Trak-It
C3 tools
Part No. Description
55002 Tool, 2 batteries, charger, carrying case
55583 Rechargeable Battery
55618 Charger
55010 Fuel Cell
FAST
10 times faster
than anchoring
5 times faster than
powder
VERSATILE
fastens into:
• Concrete
• Hollow Block
• Pan Deck
• Steel
without changing
power or color
loads
112 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
T3SS / T3MAG MECHANICAL & ELECTRICAL GAS FASTENING
T3SS Single Shot Gas Tool
Designed for Electrical and Mechanical Trades
• Fasten to Concrete, Hollow Block, Pan Deck or Steel
without changing power or color loads!
• NO OVERDRIVE - The T3SS senses how much power is
required and delivers the exact amount. Fasten to hollow
block without blasting through!
• Never have to figure which color load to use! Just click in
the 1000 shot fuel cell into place and you are ready to go!
• 3000 shot rechargeable battery with easy OFF switch that
locks into place to extend battery life.
• Almost no recoil and so quiet it can be used in occupied
buildings – Perfect for Hospitals and Schools!
• Includes 2 batteries, charger, carrying case and
safety glasses. Please note: Fuel Cell must be or-
dered separately.
Part No. Description
T3SS Tool, 2 batteries, charger, carrying case
M150200 Magnetic Work Contact Element
T3FUEL T3 fuel Cell, 2-pack
B0092 Battery, 6 Volt NiCd
B0022 Battery Charger
Pole Tool
• Comfortable "motorcycle" grip
• Sturdy design, simple to assemble
Part No. Description
EP0L6 6' Extension Pole Tool
EP0L8 8' Extension Pole Tool
T3MAG Gas Tool
25% More Powerful for Fastening Into Hard
Concrete and Steel
• Handles the hardest concrete and the toughest steel -
even red iron!
• Larger diameter pin (.125) for higher stick rate
• Deep leg track capability. Reaches into 1-5/8" x 2" deep
track.
• Easy push down force.
• One step fuel injected system.
• 15 pin strip, 45-pin magazine.
• Improved battery system.
• Newly designed fitted dust system!
• Includes 2 batteries, charger, carrying case and
safety glasses. Please note: Fuel Cell must be or-
dered separately.
Part No. Description
T3MAG Tool, 2 batteries, charger, carrying case
M150200 Magnetic Work Contact Element
T3FUEL T3 fuel Cell, 2-pack
B0092 Battery, 6 Volt NiCd
B0022 Battery Charger
T3MAG Fuel/Pin Packs
• Each Fuel Cell contains 1000
shots.
• Change fuel cells in seconds
with the Fuel Eject Button. No
valves to press. No fuel doors
to close
• Bigger pin (.125 dia) means
better success rate
• New 15 pin strip means less loading and more shooting
• New patented Point Collation virtually eliminates jams
Part No. Description Qty
T3012 1/2" Steel Pin with (1) Fuel Cell 1000
T304B 3/4' Concrete Pin with (1) Fuel Cell 1000
T3100 1" Concrete Pin with (1) Fuel Cell 1000
Hilti® Equivalents:
T3MAG: Compare to
Hilti® GX120
113
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Conduit Clamp
3/4" Plated Pin, 50/box, 250/case
Part No. Description
12CCMP034L 1/2" Conduit Clamp
34CCMP034L 3/4" Conduit Clamp
RAMSET T3 TOOL ACCESSORIES
Accessories for Electrical Contractors
Low Voltage Accessories
Accessories for Mechanical
Contractors
Straight Shank Pin
Used for fastening
sheet metal to steel,
attaching to block,
pan deck, insulated
fireproofing and most
grades of concrete.
500 per box, Master
Carton Qty. 5 boxes.
Part No. Description
M034 3/4" Pin w/Washer
M100 1" Pin w/Washer
Premium Step Shank Pin
Premium pin with bal-
listic profile for hard
concrete applications.
500 per box, Master
Carton Qty. 5 boxes.
Part No. Description
M012 1/2" Pin w/Washer
M034BB 1" Pin w/Washer
PowerPoint® Step Shank Pin
Used when maximum
holding strength is
required. 500 per
box, Master Carton
Qty. 5 bxs.
Part No. Description
M100BB 1" Premium Pin
w/Washer & Plastic Flute
One Hole Straps
3/4" Plated Pin, 100/box, 500/case
Part No. Description
38HSMP034 3/8" Hole Strap
12HSMP034 1/2" Hole Strap
34HSMP034 3/4" Hole Strap
10HSMP034 1" Hole Strap
114HSMP034 1-1/4" Hole Strap
Threaded Rod Hanger
3/4" Plated Pin, 100/box, 500/case
Part No. Description
14TRHMP034 1/4" Rod Hanger
12HSMP034 3/8" Rod Hanger
Tie Strap Holder
3/4" Plated Pin, 50/box, 1,250/case
Part No. Description
TSHMP034 Tie Strap Holder
Ceiling Clip
3/4" Plated Pin, 50/box, 250/case
Part No. Description
34CCMP034L 3/4" Ceiling Clip
Threaded Stud
1/4"-20, 1/2" Thread, 3/4" Shank,
100/box, 1000/case
Part No. Description
14STUD Threaded Stud
Top Hat Pin
3/4" Plated Pin, 100/box, 5000/case
Part No. Description
MP034TH Top Hat Pin
Bridle Ring
2" Bridle Ring, 1" Plated Pin, 50/box,
250/case
Part No. Description
BR2 2" Bridle Ring
BR200* 2" Bridle Ring w/ Attached
washer (NOT pre-assembled)
*For use when fastening with powder actuated tools, tapcons or
conventional drill and anchor methods.
Bridle Saddle
2" Bridle Saddle, 50/box, 250/case
Part No. Description
BR2S 2" Bridle Saddle
114 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
POWERS® STICK-E® GAS FASTENING SYSTEM
Trak-It® C3-ST (Short Tool)
• Magazine "short" track, holds up to 20 pins
• Special STICK-E accessories for most Electrical/Mechanical
applications
• Reduced installation costs
• Reduced operator fatigue, weighs only 7 lbs.
• Designed specifically to use the STICK-E System of ac-
cessories
• Includes 2 batteries, charger and carrying case.
Please note: Fuel Cell must be ordered separately.
Part No. Description
55002 Tool, 2 batteries, charger, carrying case
55583 Rechargeable Battery
55618 Charger
Trak-It® Pole Tools
Pole tools come complete with Trak-It C3-ST tool (Short Track
Tool).1 per box, Standard Carton Qty. 1.
Part No. Description
55049 6' Pole Tool and one Track-It C3-ST Tool
55051 8' Pole Tool and one Track-It C3-ST Tool
Trak-It® Fuel Cells
Works in temperatures down to 10°F. 20 per box.
Part No. Description
55010 Track-It Fuel Cell
Accessories
STICK-E Step Shank Pin
Shank dia. 0.102/0.088. EACH BOX OF PINS INCLUDES
ONE FUEL CELL. 1000 per box, Std. Ctn. Qty. 5000.
Part No. Description
55080 3/4" Step Shank Pin (knurled)
55081 1" Step Shank Pin
Standard Pins With Break-Free Collation
Smooth Shank with rolled point. Shank dia. of 0.102.
Designed for use in concrete and masonry. Plastic collation
breaks completely free of pin during installation. EACH
BOX OF PINS INCLUDES ONE FUEL CELL. 1000 per
box, Std. Ctn. Qty. 5000.
Part No. Description
55032 3/4" Black
55033 1" Zinc
55034 1-1/4" Zinc
55035 1-1/2" Zinc
Perma-Seal Coated Standard Pins
Designed for use in areas where a greater level of corro-
sion resistance is required. Shank dia. of 0.102. EACH
BOX OF PINS INCLUDES ONE FUEL CELL. 1000 per
box, Std. Ctn. Qty. 5000.
Part No. Description
55038 3/4" Perma -Seal
55039 1" Perma-Seal
115
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
POWERS® STICK-E® GAS FASTENING SYSTEM
STICK-E Accessories for Electrical and Mechanical Contractors
Stick-E accessories snap directly in the nose of the Trak-It Tool and are held in place while shooting.
Cable Tie Donut
For attaching cable
ties (up to 1/4" wide)
to all types of walls
and ceilings. Ideal
for strapping wires
and cable for hanging
temporary lighting
fixtures from all base materials. Rec-
ommended Pin Size: P/N 55080 3/4"
Step Shank Pins. 100/box,
Part No. Description
55076 Cable Tie Donut
Conduit Clip (1 Hole Strap)
For attaching conduit
and light duty pipe
to walls and ceilings
of any base material.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
Part No. Description
55059 1/2" Conduit Clip
55061 3/4" Conduit Clip
BX Clip
For attaching BX Cable
to walls and ceilings
of any base material.
Recommended Pin Size:
P/N 55080 3/4" Step
Shank Pins. 100/box,
Part No. Description
55054 3/8" BX Clip
Mini Conduit Clip
For attaching conduit
and steel piping to
steel beams, wood
and concrete ceilings.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
Part No. Description
55064 1/2" Mini Conduit Clamp
55066 3/4" Mini Conduit Clamp
55068 1" Mini Conduit Clamp
Bridle Ring
For suspending single
or multiple wires and
cable in runs from ceil-
ings of all base materi-
als. Recommended
Pin Size(s): P/N 55080 3/4" and P/N
55081 1" Step Shank Pins. 100/box.
Part No. Description
55094 1-1/4" Bridle Ring
55095 1-1/2" Bridle Ring
55096 2" Bridle Ring
Rod Hanger
For attaching rod over-
head to steel beams,
wood or concrete while
suspending utilities,
cable trays, conduit
and pipe. Recommend-
ed Pin Size(s): P/N
55080 3/4" and P/N
55081 1" Step Shank Pins. 100/box.
Part No. Description
55050 1/4" Rod Hanger
55052 3/8" Rod Hanger
Rebar Basket Clip
For attaching #3 and
#4 rebar to existing
concrete or wood
forms prior to a pour.
Recommended Pin
Size: P/N 55080 3/4"
Step Shank Pins. 100
per box,
Part No. Description
55070 Rebar Basket Clip
Right Angle Clip
For suspending acous-
tical ceiling systems or
light fixtures. Recom-
mended Pin Size(s):
P/N 55080 3/4" and
P/N 55081 1" Step
Shank Pins. 100/box.
Part No. Description
55092 Right Angle Clip
Strap Washer
For attaching duct
straps to suspended
HVAC ductwork onto
ceilings. Recom-
mended Pin Size:
P/N 55080 3/4"
Step Shank Pins.
100/box,
Part No. Description
55062 1/2" Strap Washer
Lathing Washer
For attaching wire lathe
to all base materials.
Recommended Pin
Size(s): P/N 55080
3/4" Step Shank Pins,
P/N 55033 1" and P/N
55034 1-1/4" Break-
Free Rolled Point Pins. 100 per box,
Part No. Description
55040 Lathing Washer
Insulation Washer
For attaching exterior
foam insulation to all
base materials. Recom-
mended Pin Size(s):
P/N 55080 3/4" and
P/N 55081 1" Step
Shank Pins, P/N 55033
1-1/4" and P/N 55034 1-1/2" Break-
Free Rolled Point Pins. 100/box.
Part No. Description
55042 Insulation Washer
Stainless Steel Sealing
Washer
For attaching water-
proofing membrane to
foundations and roofing
applications. Recom-
mended Pin Size(s):
P/N 55038 3/4" and P/N 55039 1"
Permaseal Pins. 100/box,
Part No. Description
55043 SS Sealing Washer
116 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GAS PRODUCTION TOOLS
Standard Pin - C3
Smooth Shank with Rolled Point
Designed for use in concrete and
masonry. Shank Dia. 0.102" Each box
of pins has one fuel cell. 1000 per box,
Standard Carton Qty. 5000.
Part No. Description
55022B 3/4" Black
55024 1" Zinc
55026 1-1/4" Zinc
55028 1-1/2" Zinc
Trak-It® C3
• Designed for use on concrete,
lightweight concrete, hollow and
grouted CMU, masonry and steel.
• Installs 1/2" steel pin with step
shank and standard pins with
smooth shank rolled point 3/4" -
1-1/2".
• Tool comes with case, charger and
two batteries
Part No. Description
55011 C3 Trak-It
55055 C3 Fuel Cell
55618 Battery Charger
55583 Rechargeable Battery
55053 6' Pole Tool (only)
55055 8' Pole Tool (only)
Trak-It® C4
• Provides enough power to drive
3/4" to 2-9/16" pins with shank
diameters up to .145"
• Fastens wood (2x4s) to concrete or
steel track to concrete.
• One fuel cell shoots 800 to 1200
fasteners.
• Tool comes with case, charger and
two batteries
Part No. Description
55112 C4 Trak-It
55618 Battery Charger
55583 Rechargeable Battery
Trak-It® C4EX
• Same features as the C4, but 20%
more power.
• Designed for use on concrete,
lightweight concrete, hollow and
grouted CMU, masonry and steel
• Designed for speed and efficiency.
• One fuel cell shoots 800 to 1200
fasteners.
• Tool comes with case, charger and
two batteries
Part No. Description
55127 C4EX Trak-It
55618 Battery Charger
55583 Rechargeable Battery
1/2" Steel Pin - C3
Step Shank with Rolled Point
Designed for use in A36 and A572 steel
beams, purlins and bar joist.
Each box of pins has one fuel cell. 1000
per box, Standard Carton Qty. 5000.
Part No. Shank Dia.
55020 0.120/0.102
Bullseye Pins - C3
Step Shank with Rolled Point
Shank dia. 0.102 Each box of pins has
one fuel cell. 1000 per box, Standard
Carton Qty. 5000.
Part No. Description
55085 680 Step Shank Pin
55087 730 Step Shank Pin
55080 780 Step Shank Pin
Standard Pins With Break-
Free Collation - C3
Smooth Shank with Rolled Point
Smooth Shank with rolled point.
Shank dia. of 0.102. Designed for use
in concrete and masonry. Plastic colla-
tion breaks completely free of pin dur-
ing installation. Each box of pins has
one fuel cell. 1000 per box, Standard
Carton Qty. 5000.
Part No. Description
55032 3/4" Black
55033 1" Zinc
55034 1-1/4" Zinc
55035 1-1/2" Zinc
C3 Trak-It Gas Tool and Accessories
Trak-It Fuel Cells, Pole Tools and
accessories can be found on page 114
117
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TF1100 TrakFast
• Automatically resets
piston.
• 42 pin magazine capacity
• Narrow nose and profile
to reach inside deep leg
track (1-5/8"w x 2"h)
Specifications
• Uses Fuel cell, 1000
shots
• Max. cycles/second: 2
• Weight: 8.375 lbs.; Length: 17"
• Battery (charged): 3000 shots
Part No. Description
TF1100 TF1100 Trak Fast
GAS PRODUCTION TOOLS
Trak-It® C4 Pins and Washers
• Each box comes with 800 pins and 1 fuel cell.
• Part no. 55147 (Sill Plate Pin) comes with Stick-E
washers
Part Shank
No. Description Dia.
55111 3/4" Pin 0.102
55130 3/4" Pin 0.145
55113 1" Pin 0.102
55132 1" Pin 0.145
55167 1" Step Shank Pin, Knurled 0.145
55167 1-1/4" Step Shank Pin 0.145
555136 1-1/2" Step Shank Pin 0.145
55169 1-1/4" Step Shank Pin, Knurled 0.145
55141 1-7/8" Step Shank Pin 0.145
55171 2" Step Shank Pin 0.145
55124 2-1/4" Pin 0.102
55138 2-3/8" Step Shank Pin 0.145
55128 2-1/2" Pin 0.145
55140 2-1/2" Step Shank Pin 0.145
5145 2-9/16" Pin 0.137
55147 2-9/16" Pin w/ Stik-E washer 0.137
55161 .500 Pin, Knurled 0.120
55163 .680 Pin, Knurled 0.102
55165 .730 Pin, Knurled 0.120
55149 1" Square Stick-E washer 0.137
55116 .102 x 1-1/4" C4 Pin 0.102
55118 .102 x 1-1/2" C4 Pin 0.102
55139 .145 x 2-1/4" Step Shank Pin 0.145
55172 .145 x 1"Wood/Steel, Knurled 0.145
55173 .145 x 1-1/4" Wood/Steel, Knurled 0.145
55174 .145 x 2" Wood/Steel, Knurled 0.145
Battery
Fuel Cell
TrakFast Accessories
Battery
Charger
Part Std.
No. Description Carton Qty.
LD100 Plated Lathing Disc (1" dia.) 1000
7405151 Disc Holding Probe 1
7405160 Delta Plug Holder/Cosella 1
7405162 Platen Plug Holder/Big O 1
TFUEL Fuel Cell 12
B0022 Battery Charger 1
7505012 Battery 1
TrakFast Fuel/Pin Packs
TrakFast Standard
Fuel/Pin Pack
For high volume, repetitive
fastenings to concrete and steel such as drywall track to
concrete.
Part Std.
No. Description Carton Qty.
FPP012S 1/2" Plated Steel Pin 1000
FPP034B 3/4" Black Pin 1000
FPP100B 1" Black Pin 1000
TrakFast Breakaway
Fuel/Pin Pack
For high volume, repetitive
fastenings to concrete such as
wood furring to concrete
Part Std.
No. Description Carton Qty.
FPP034T 3/4" Plated Pin 1000
FPP100T 1" Plated Pin 1000
FPP114T 1-1/4" Plated Pin 1000
FPP112T 1-1/2" Plated Pin 1000
Trak-It Fuel Cells, Pole Tools and
accessories can be found on page 114
Trak-It® C4 CZ
• Single shot gas fasten-
ing tool for light duty
static load.
• Able to shoot .300 and
8mm headed powder
pins up to 3 inches in
length. Shank diam-
eters include .157",
.137" and .145",
• One fuel cell shoots
800 to 1200 fasteners.
• Tool comes with case,
charger and two bat-
teries
Part No. Description
55133 C4 Trak-It
55618 Battery Charger
55583 Rechargeable Battery
118 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
P3600™ .27 Caliber, Low-Velocity Semi-Automatic Strip Tool
• Precison cast aluminum body
• Installs 10mm head dripe pins, 3/8" threaded studs,
3/8" headed drive pins
• Use where more power is needed; attaching 2x4s to
hard aggregate or steel Part No. Description
P3600 .27 Caliber Semi-Automatic Strip Tool
P3500™ .27 Caliber, Low-Velocity
Semi-Automatic Strip Tool
• Designed for high speed and repetitive volume applica-
tions
• Installs ballistic point drive pins, .300 head drive pins,
8mm head drive pins and 1/4"-20 threaded studs, up to
3" in total length
• Precision cast aluminum
Specifications
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 5 lbs.; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
Typical Applications
• Acoustical - Ceiling clip assemblies
• Drywall - Metal track, door frames
• Forming - Concrete forms, basket clips, forming pins
• Electrical - Boxes, conduit clip assemblies
• Mechanical - Duct straps
• Residential - Sill Plates
Part No. Description
P3500 .27 Caliber Semi-Automatic Strip Tool
PA3500™ .27 Caliber, Low-Velocity
Semi-Automatic Strip Tool with Power
Adjuster
• Power adjuster settings of 1, 3 and 6.
• Installs ballistic point drive pins, .300 head drive pins,
8mm head drive pins and 1/4"-20 threaded studs, up to
3" in total length
• Precision cast aluminum
Specifications
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 5 lbs.; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
Typical Applications
• Acoustical - Ceiling clip assemblies
• Drywall - Metal track, door frames
• Forming - Concrete forms, basket clips, forming pins
• Electrical - Boxes, conduit clip assemblies
• Mechanical - Duct straps
• Residential - Sill Plates
Part No. Description
PA3500 .27 Caliber Semi-Automatic Strip Tool
with power adjuster
POWERS® POWDER ACTUATED TOOLS
Specifications
• .27 caliber, 10-strip loads: 5 (Red), 6 (Purple)
• Weight: 5 lbs; Length: 13-5/8"
• Maximum Pin Length: 1/2" - 3" total length
Typical Applications
• 2x4s to concrete or steel
• Hanging sprinkler pipe
• Heavy-duty applications for steel and concrete
• Tele-communications
• Concrete forms, basket clips, forming pins
• Sill Plates
119
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RAMSET® POWDER ACTUATED TOOLS
721 .22 Caliber Single Shot Tool
1-1/2" Pin Capacity
• Automatic cartridge ejection system increases opera-
tor speed and productivity
• Only two moving parts to clean
• Low Recoil reduces operator fatigue on large jobs
• Narrow 5/8" muzzle bushing for easy access in tight
fastening areas
• Rubber cushion grip for maximum operator comfort
• Rugged metal housing holds up for years
• 5 Year Warranty.
Specifications
• 22 caliber, single shot loads, 2 (Brown), 3 (Green), 4
(Yellow)
• Weight: 4.3 lbs.; Length: 13-1/2"
• Muzzle Bushing O.D.: 5/8"
• Maximum Pin Length: 1-1/2
D60 .25 Caliber Disc Tool
Power Adjustable. 2-3/8" Pin Capacity
(2-1/2" w/washer)
• Quick power adjustment gives eight levels of power
with only one load level for a variety of applications
• Rugged polyamide housing reduces heat transfer and
maximizes operator comfort
• Soft, recoil-absorbing handle for increased user comfort
• Ramset Disc Technology, loads only advance after fir-
ing. Eliminates 10-20% of load waste
• 5 Year Warranty.
Specifications
• .25 caliber, 10-shot disc loads, 2 (Brown), 3 (Green),
4 (Yellow)
• Weight: 4.9 lbs.; Length: 12-1/2";
• Muzzle Bushing O.D.: 3/4"
• Maximum Pin Length: 2-3/8" (2-1/2"-w/washer)
Cobra .27 Caliber
Semi-Automatic Strip Tool
2-1/2" Pin Capacity (3" w/washer)
• Padded recoil-absorbing handle
• Fastens up to 3" standard Ramset drive pins and
threaded studs — ideal for general construction
applications
• Full one-year warranty
Specifications
• Uses .27 caliber 10-shot strip loads 2 (Brown), 3
(Green), 4 (Yellow), 5 (Red)
• Weight: 4.5 lbs.; Length: 13-1/4"
• Muzzle Bushing O.D.: 9/16"
• Maximum Pin Length: 2-1/2" (3" w/washer)
SA270 .27 Caliber
Semi-Automatic Strip Tool
3" Pin Capacity
• Very Powerful, power adjust
• Rubber grip on front barrel eliminates pinched
fingers & hands
• Twist lock front end, easy to clean
• Soft, recoil-absorbing handle for increased user comfort
• 5 Year Warranty.
Specifications
• .27 caliber 10-shot strip loads 2 (Brown), 3 (Green), 4
(Yellow), 5 (Red)
• Weight: 5.45 lbs.; Length: 15"
• Muzzle Bushing O.D.: 5/8"
• Maximum Pin Length: 3" straight pin
120 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RAMSET® POWDER LOADS
Powder Loads
ITW Ramset powder loads and tools match tolerances to provide optimum power within recognized national velocity
standards. Available in color-coded 10-load discs, 10-load strips, and 100-load boxes. Power level is designated by the
load level number marked on each box; also by the color of the box and each powder load. As the number increases, the
power level increases.
Powder Loads for Ramset® Tools
Tool Part Power Caliber/
Model No. Level Color Type Pkg
D60/D60L 2D60 2 Brown .25 Disc 10/Disc
D45/D45A 3D60 3 Green .25 Disc 10 Discs
& AutoFast 4D60 4 Yellow .25 Disc per box
D45/D45A 5D45 5 Red .25 Disc 10 Disc/box
& AutoFast
721, 4170 22CW 2 Brown .22 Single
M70, RS22, 32CW 3 Green .22 Single 100/box
& HD22 42CW 4 Yellow .22 Single
SA270 2RS27 2 Brown .27 Strip 10/Strip
Cobra 3RS27 3 Green .27 Strip 10Strips
Viper 4RS27 4 Yellow .27 Strip per box
Rocket 5RS27 5 Red .27 Strip
L1600 L674 4 Green .22 Single 100/box
L675 5 Red .22 Single
Powder Loads for HILTI® Tools*
Tool Part Power Caliber/
Model No. Level Color Type Pkg
3RS25 3 Green .25 Strip 10/Strip
DX-35 4RS25 4 Yellow .25 Strip 10 Strips
5RS25 5 Red .25 Strip per box
DX-350 2RS27 2 Brown .27 Strip 10/Strip
DX-351 3RS27 3 Green .27 Strip 10Strips
DX-36M 4RS27 4 Yellow .27 Strip per box
DX-350 10/Strip
DX-351 5RS27 5 Red .27 Strip 10 Strips
DX-36M per box
DX-451
DX-451 10/Strip
DX-460 6RS27 6 Purple .27 Strip 10 Strips
per box
DXE37 22CW 2 Brown .22 Single 100/box
DXE72 32CW 3 Green .22 Single
*Hilti® is a registered trademark of Hilti Corp.
• .25 and .27 caliber strips
available in 1000 pack
• 1000 pack/100 strips/box
Save with Bulk Packaging!
121
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RAMSET® POWDER ACTUATED FASTENERS
Part Shank Auto Rocket HD22
No. Len. 721 Fast D60 SA270 D45A Cobra RS22
1503KB 1/2" • • • • • • •
1506B 3/4" • • • • • • •
1508B 1" • • • • • • •
Black Track Pins — Designed for concrete & structural steel applications
The special black coating improves pin penetration into difficult base material (i.e. hard concrete). Available in 100-pack
and 1000-pack per box. Shank Dia.: .145", Head Dia.: .300". 1503K: Knurled Shank cinches connections tight
Part Shank Auto Rocket HD22
No. Len. 721 Fast D60 SA270 D45A Cobra RS22
1503K 1/2" • • • • • • •
1506 3/4" • • • • • • •
1508 1" • • • • • • •
1510 1-1/4" • • • • • • •
1512 1-1/2" • • • • • • •
1514 2" • • • • • •
1516 2-1/2" • • • •
1524 3" • •
Shank Dia:.145", Packaged: 100/box.
*1000 Pack available.
.300 Head Diameter Drive Pins — Designed for concrete & structural steel applications
Part Shank Auto Rocket HD22
No. Len. 721 Fast D60 SA270 D45A Cobra RS22
1506SD 3/4" • • • • • • •
1508SD 1" • • • • • • •
1510SD 1-1/4" • • • • • • •
1512SD 1-1/2" • • • • • • •
1514SD 2" • • • • • • •
1516SDC 2-1/2" • • • • • • •
1524SDP* 3" • • • • • • •
*1524SDP: Square washer indicates
3" pin installed. Shank Dia:.145",
Packaged: 100/box.
.300 Head Diameter Drive Pins with 7/8" Washer
Washer increases bearing surface against material to be fastened
Part Shank Auto Rocket HD22
No. Len. 721 Fast D60 SA270 D45A Cobra RS22
SP58TH 5/8" • • • • • • •
1906 3/4" • • • • • •
1908 1" • • • • • •
Shank Dia:.145" (SP58TH =.150), Head diameter 8mm (SP58TH = .300")
Packaged: 100/box.
8mm Head Diameter Top Hat Drive Pins — Improved attachment to inconsistant materials
Part Shank Auto Rocket HD22
No. Len. 721 Fast D60 SA270 D45A Cobra RS22
SP12 1/2" • • • • • • •
SP58 5/8" • • • • • • •
SP34 3/4" • • • • • • •
SP78 7/8" • • • • • • •
PowerPoint Step Shank Pins
SP100 1" • • • • • • •
SP114 1-1/4" • • • • • • •
SP112 1-1/2" • • • • • • •
SP178 1-7/8" • • • • • • •
.300 Head Diameter PowerPoint and PowerPoint Step Shank Pins
For fastening into harder steel & concrete
PowerPoint pins provide easier penetration into hard steel and concrete. Designed to reduce pin failures and increase
holding values.
PowerPoint Shank Diameter: .150"
PowerPoint Step Shank Dia.: .150"/.180".
Packaged: 100/box.
122 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RAMSET® POWDER ACTUATED FASTENERS
HD22 Rocket Auto Lengths Part
RS22 Cobra D45A SA270 D60 Fast 721 Shank Thread No.
• • • • • • • 1/2" 3/4" 1623WK
• • • • • • • 1" 1/2" 1642W
• • • • • • 1" 3/4" 1643W
1/4"-20 Threaded Studs — For applications that require removability or require shimming.
Shank Dia:.145", Packaged: 100/box.
K = Knurled Shank
Powers Powers Ramset Ramset Hilti Hilti Hilti Shank Part
P3600 P3801 D60 721 DX E37 DX450 DXA41 Len. No.
• • • • • • 3/4"K 50340
• • • • • • 1" 50342
• • • • • • 1-1/4" 50344
Shank Dia:.145", Thread Length: 1-1/4"
Packaged: 100/box. K = Knurled Shank
3/8"-16 Threaded Studs — For applications that require removability or require shimming.
Part Shank Auto Rocket HD22
No. Len. MM Fast D60 SA270 D45A Cobra RS22
SP100 1" 25.4 • • • • • •
SP114 1-1/4" 31.8 • • • • • •
SP112 1-1/2" 38.1 • • • • • •
SP178 1-7/8" 47.6 • • • • • •
PowerPoint Step Shank Pins — Used for fastening into harder steel and concrete.
Shank Dia:.150"/.180", Head Dia: .300"
Packaged: 100/box.
Hybrid Threaded Rod Hanger
For suspended ceilings, piping and
other applications using 1/4" or 3/8"
threaded rod
Use with Ramset Tools: 721, Autofast,
D60, SA270, Rocket/D45A, Cobra, Viper,
RS22/HD22, R150/T3SS
1" Premium PowerPoint pin preassembled to a 16 guage
threaded rod hanger. Shank Dia.: .125"/.150". Head Dia.:
.300". 50 per box.
Part No. Description
14TRHSS10 1/4" Rod Hanger
38TRHSS10 3/8" Rod Hanger
Hybrid Conduit Clamp
For attaching conduit to concrete
Use With Ramset Tools: 721, Viper, RS22/HD22,
R150/T3SS
1" Premium PowerPoint pin preassembled to an
18 guage condit clamp. Shank Dia.: .125"/.150". Head Dia.:
.300". 50 per box.
Part No. Description
12CCSS10L 1/2" Conduit Clamp
34CCSS10L 3/4" Conduit Clamp
Hybrid Pin
For general purpose fastening to concrete
Use With All Ramset Powder Tools/All Ramset
Single Pin Gas Tools
PowerPoint step shank pin preassembled to
1/2" washer. Shank Dia.: .125"/.150". Head Dia.:
.300". 500 per box.
Part No. Description
M100BB 1" PowerPoint Step Shank Pin
with 1/2" domed washer & flute
Hybrid One Hole Conduit Strap
For attaching conduit or armored cable to concrete
Use With Ramset Tools: 721, Autofast, D60,
SA270, Rocket/D45A, Cobra, Viper, RS22/
HD22, R150/T3SS
1" Premium PowerPoint pin preassembled to an
18 guage condit strap. Shank Dia.: .125"/.150".
Head Dia.: .300". 100 per box.
Part No. Description
38HSSS10 3/8" Hole Strap
12HSSS10 1/2" Hole Strap
34HSSS10 3/4" Hole Strap
10HSSS10 1" Hole Strap
Hybrid Fasteners — Engineered To Be Used In Either Gas Or Powder Actuated Tools.
123
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RAMSET® POWDER TOOLS FOR OVERHEAD
Viper .27 Caliber
Semi-Automatic Strip Tool
Specifically Designed for Overhead
Applications. 1-1/2" Pin Capacity
• Automatic load advance each time the Viper is fired.
• Automatic piston return.
• Overdrive protection. Heavy duty buffer system pre-
vents front end damage caused by piston overdrive
• Completely redesigned open-ended muzzle keeps tool
cleaner longer.
• Simplified barrel retention collar. No tools are required
for assembly or disassembly.
• Screws securely into the end of the extension pole
with the steel collar ensuring a more durable and rigid
connection.
• 5 Year Warranty.
Specifications
• 27 caliber, 10-strip loads: 2 (Brown), 3 (Green), 4 (Yel-
low), 5 (Red)
• Weight: 4.5 pounds
• Maximum Pin Length: 1-1/2"
• Length: 17 inches
Part No. Description
Viper .27 Caliber Semi-Automatic Strip Tool
Viper Pole Tools
• Rubber “motorcycle” grip for comfort and to
reduce recoil level
• Delrin™ coupler on cable makes pole di-electric
• Nyloc™ nuts keep your adjustment fixed sol-
idly on the trigger bar
• Top-quality hand lever
• Lightweight cast aluminum housing fits tool
snugly and provides tool protection
• Telescoping poles are adjustable in 1' increments
• Trigger bar adjusts easily for individual tools
Part No. Description
VPOL6 6' Fixed Length Pole Tool for Viper
VPOL8 8' Fixed Length Pole Tool for Viper
TVPOL612 6'-12' Telescoping Pole Tool for Viper
TVPOL618 6'-18' Telescoping Pole Tool for Viper
Pole Tools
For Ramset D60, SA270, D45A & Hilti DX36
• Rubber “motorcycle” grip for comfort and to
reduce recoil level
• Delrin™ coupler on cable makes pole di-electric
• Nyloc™ nuts keep your adjustment fixed solidly
on the trigger bar
• Top-quality hand lever
• Lightweight cast aluminum housing fits tool
snugly and provides tool protection
• Trigger bar adjusts easily for individual tools
Part No. Description
PTSEMI6 6' Fixed Length Pole Tool
PTSEMI8 8' Fixed Length Pole Tool
J-Master Tool®
(L1700)
• For attachment of J-Clip® (L1701)
and JClip-Pur® (L1801) Hanger
Wire Clips.
Part No. Description
L1700 J-Master Tool
L1701 J-Clip
L1801 J-Pur
J-Clip® (L1701)
• Strong, reliable at-
tachment of pre-tied
hanger wire.
• Use for open web bar
joists or purlins.
• Each clip fits 1/16" -
1/4" flanges.
J-Pur® (L1801)
• Fast, easy attachment of
pre-tied hanger wire from
Z-Purling.
• Disengages from J-Master
Tool after installation.
• Two magnetic strips at-
tached to J-Master tool
make installation easy.
124 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
OVERHEAD FASTENING
LADD Assembly
for L1600
1-1/4" preassembled pin and clip.13
gauge angle clip. Shank diameter: .152"
Head diameter: .300. 100 per box.
Part No. Description
L652 LADD Assembly
Angle Clips and
Washers
14 gauge angle clip. 100 per box.
22 gauge metal washer. 100 per box.
Part No. Description
1202CF 3/4" Angle Clip
1183A 1-7/16" Metal Washer
Insulation Washer
22 gauge metal washer. 100 per box.
Part No. Description
IW
1-7/16" Insulation Washer
Part No. Description Pin Length
SPC78 Powerpoint Pin 7/8"
SPC114 Powerpoint Pin 1-1/4"
Powerpoint Pins
With Ceiling Clips
Pin Preassembled to a 14 gauge angle
clip. Shank diameter: .150" (SPC114 =
.150/.180,) Head diameter: .300. 1000
per box.
Fastener Accessories
HANGER / TIE WIRE
Ceiling Hanger Wire - 12 Gauge
12' Lengths. Sold by Bundle of 1,680 ft. Priced per 1,000 ft.
Part No. Description
12G1200HAW Ceiling Hanger Wire 12 gauge
Rodmans Tie Wire - 16 Gauge
3-1/2 lb. spool. 20 spools per box.
Part No. Description
TIE16GA350 Tie Wire 16 gauge
U-Hank Tie Wire - 18 Gauge
18 gauge x 48". 25 lb. per box
Part No. Description
UHANK U-Hank Tie Wire 18 gauge
SDC100 Pre-Ties
1" Pin & Clip
Pre-Tied To 12 Gauge Wire
Part No. Description
SDC100-3.6 4 ft. w/1" Angle Clip
SDC100-5.6 6 ft. w/1" Angle Clip
SDC100-7.6 8 ft. w/1" Angle Clip
SDC100-9.6 10 ft. w/1" Angle Clip
SDC100-11.6 12 ft. w/1" Angle Clip
Part No. Description Pin Length
SDC100 Ceiling Clip Assemblies 1"
SDC125* Ceiling Clip Assemblies 1-1/4"
Ceiling Clip
Assemblies
Pin Preassembled to a 14 gauge angle
clip. Shank diameter: .145", Head diam-
eter: .300. 1000 per box.
*Available in 100-Pack (part no. SDC125C)
HANGER WIRE & PRE-TIES
CEILING CLIP ASSEMBLIES
125
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Strut / Cable Tray / Caddy
Strut Channel
Strut Grids - Designed, Engineered,
Stamped . . . . . . . . . . . . . 2, 169
Concrete Insert . . . . . . . . . . 133
Fiberglass Strut Systems 150-151
Stainless Steel Strut . . . . . . . 154
Strut Channel Overview . . . . 128
Strut Channel . . . . . . . . 130 - 133
Strut Channel - Finishes . . . . 126
Strut Channel - Hole Patterns 129
Slotted Angle . . . . . . . . . . . . 132
Raceway................ 133
Roof Top Supports 155, 236-242
Spring Nuts
Channel Nut Selection Chart 134
Spring - (Channel) Nuts. . . . . 135
Pipe & Conduit Clamps
Clic ................... 143
Cush-A-Clamp®........... 141
Cush-A-Claw Strut Clamps. . . 144
Holdrite Strut Clamps . . . . . . 139
Hydrazorb . . . . . . . . . . . . . . 141
Klo-Shure Couplings . . . . . . . 142
Pipe and Conduit Clamps
(Strut Straps) . . . . . . . . 140, 145
Porcelain Clamps . . . . . . 139-140
Snap-N-Strut . . . . . . . . . . . . 144
Quick Reference
Strut Fittings & Accessories
Beam Clamps . . . . . . . . . 137-138
Brackets ............... 137
Hanging Systems -
CADDY "Speed-Link"
GRIPPLE . . . . . . . . . . . 165 - 168
Post Bases - Brackets . . . . . 137
Strut Fittings . . . . . . . . 136, 139
Cable Tray
Cable Tray Systems . . . 146 - 149
Stainless / Fiberglass
Duct Spacers . . . . . . . . . . . . 153
Fiberglass Strut System 150 - 151
Non-Metallic Cable Rack. . . . 152
Stainless Steel Strut / Hangers/
Hardware............... 154
CADDY®
Acoustical . . . . . . . . . . . . . . 163
Beam Clamps / Clips . . . 156 - 157
Conduit / Cable. . . . . . . 160 - 162
Datacomm ITS . . . . . . . . . . . 164
Hangers / Hanging Systems 168
Pyramid / Rooftop Supports 155
ROD LOCK Beam Clamps/Nuts 127
SPEED LINK . . . . . . . . . . . . . 168
Stud Wall . . . . . . . . . . . 158 - 159
126 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STRUT SYSTEMS - FINISHES
Steel Channel Finishes
Pre-Galvanized
Material (steel strip) is coated
with zinc by hot-dip process
prior to roll-forming or press
operations. The zinc coating
weight is G90 conforming to
ASTM Specification A653 GR 33.
Electro-Galvanized
Parts, screws and nuts are
coated with zinc electrolytically
to commercial standards (ASTM
- B633 Type III C1).
Hot-Dipped Galvanized
Material is coated with zinc
after being roll-formed or after
all manufacturing operations
are completed, conforming to
ASTM specification No. A123
or A153.
Power-Green®
Channel and parts are carefully
cleaned and phosphated.
Immediately after phosphating,
a uniform coat of a highly
effective rust-inhibiting acrylic
enamel paint is applied
by electro-deposition and
thoroughly baked.
Plain
Plain finish designation means
that the channel retains the
oiled surface applied to the raw
steel during the rolling process.
The fittings have the original
oiled surface of the bar-stock
material.
Power-Gold®
A .5 mil electro-galvanized
is applied with a cohesive
molecular bond to the base
metal steel, in compliance with
the ASTM B633 standard.
Yellow Dichromate is applied
over the zinc and results in a
gold appearance which acts as
a non-porous barrier sealant.
Product Categories
Channel
Channel (Spring)
Nuts
Pipe & Conduit
Clamps
(Strut Straps)
Strut Fittings
Materials and
Finishes
Material
• Steel
• Stainless Steel -
Types (304/316)
• Aluminum
• Fiberglass
Finishes (Channel)
• Pre-Galvanized (EG)
• Hot-Dipped Galvanized
(HDG)
• Plain (PLN)
• Stainless Steel (SS)
• Fiberglass (VE & PE)
• Power-Gold® / Gold
Galv® (ZD)
• Power-Green®
• PVC Coated
Finishes (Fittings)
• Electro-Galvanized (EG)
• Hot-Dipped Galvanized
(HDG)
• Plain (PLN)
• Stainless Steel (SS)
• Fiberglass (VE & PE)
• PVC Coated
Full Line of Stainless
Steel and Fiberglass
• Channel
• Fittings & Accessories
• Bridge Hangers
Standard Lengths
• 10 ft.
• 20 ft.
• Cut to length available
upon request
Major Manufacturers
• Power-Strut®
• Super-Strut®
• Unistrut®
• Versabar®
• Haydon®
• Aickenstrut®
Special Materials
Stainless Steel
Material in accordance with
ASTM A 240 (Type 304/316).
Aluminum
Material in accordance with
ASTM A 240 (Type 304/316).
Fiberglass
Aickinstrut Polyester, Vinylester.
UNISTRUT®
127
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
NEW INNOVATIVE PRODUCTS - CADDY® ROD LOCK
CADDY® Rod Lock Beam Clamp for 3/8" Rod
CADDY® ROD LOCK is an innovative threaded rod mounting system from ERICO
that provides a quick and economical solution for installing electrical and me-
chanical systems supported by threaded rod. The system includes the CADDY
ROD LOCK beam clamp and channel nut. With its breakthrough “push-install”
design, the patent-pending CADDY ROD LOCK simplifies the installation of
threaded rod. Simply push the threaded rod through the mounting hole and
it instantly locks into position. The system can even be used on threaded rod
with slightly damaged threads or minor burrs, helping to save time by min-
imizing the amount of de-burring that is usually required prior to installa-
tion. The unique features of the CADDY ROD LOCK system help to reduce
the installation time of threaded rod by up to 60% compared to conven-
tional fasteners. In many common applications, the system also requires less
installation hardware. CADDY ROD LOCK is another innovation from ERICO designed
to help the construction industry complete projects faster, easier and more efficiently.
• Works with slightly damaged threads and minor
burrs on the threaded rod
• Reduces installation time up to 60%
• Load capacity (3/8" rod):
1/8" to 5/16" flange - 250 lbs.
3/8" - 7/16" flange - 500 lbs.
• Maximum Pipe diameter supported by Clamp and
Threaded Rod: 4"
• (UL® 203 & UL 2239 Approved
• FM® Approved (when installed with the set screw
on the load side only
* Not to be used with hot-dipped galvanized hardware/components.
Part No. Description
CRLB37EG 3/8" CADDY® ROD LOCK Beam Clamp
CADDY® Rod Lock Channel Nut for 3/8" Rod
• Works with slightly damaged threads and minor
burrs on the threaded rod
• Reduces installation time up to 34%
• Max. Rec. Load (3/8" rod): 1200 lbs. (see N1)
• Slip Load Load (3/8" Rod): 400 lbs. (see N2)
• Electro-Galvanized ductile iron
Part No. Description
CRLS37EG 3/8" CADDY® ROD LOCK Channel Nut
See page 173 for CADDY SN
Series Slip-On Lock Nuts
128 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STRUT CHANNEL OVERVIEW
PS 100 1-5/8" x 3-1/4" x 12 ga. H-1200
PS 200 1-5/8" x 1-5/8" x 12 ga.
PS100
PS100 2T3
Welded Configurations
Welded Configurations
PS200 PLB
PS200 PLA
PS200
PS200 2T3 PS200 2T5
PS200 2T2 PS200 2T4 PS200 PLC
PS 150 1-5/8" x 2-7/16" x 12 ga.
PS150
PS150 2T3
Welded Configurations
PS 210 1-5/8" x 1-5/8" x 14 ga. PS 300 1-5/8" x 1-3/8" x 12 ga.
PS210 2T3
PS210
Welded Configurations
PS300 2T3
PS300
Welded Configurations
PS 400 1-5/8" x 1" x 12 ga. PS 500 1-5/8" x 13/16" x 14 ga.
PS500
PS500 2T3
Welded Configurations
PS400
PS400 2T3
Welded Configurations
PS 520 1-5/8" x 13/16" x 12 ga. PS 560 1-5/8" x 13/16" x 16 ga.
Welded Configurations
PS520
PS500 2T3
PS 5000 2" x 2" x 10 ga. PS 600J 13/16" x 13/16" x 19 ga. PS 700J 13/16" x 13/32" x 19 ga.
PS700J
See
Junior Channel
See
Junior Channel
See Heavy
Duty Channel PS5000 PS600J
PS560
PS560 2T3
Welded Configurations
3 ¼"
DEEP
2
7/16"
DEEP
1"
DEEP
1
5/8"
DEEP
12
GAUGE
1
5/8"
DEEP
14
GAUGE
1
3/8"
DEEP
13/16"
DEEP 14
GAUGE
13/16"
DEEP 12
GAUGE
129
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STRUT CHANNEL - HOLE PATTERNS
Channel with Holes on Three Sides ("H3" Type - Power-Strut Only)
Channel with Holes ("H" Type - Power-Strut)
Channel with Slots ("S" Type - Power-Strut)
Channel with Elongated Holes ("EH" Type - Power-Strut) (Stock)
Stock
PS 100, PS 150, PS 200, PS 210, PS 200 2T3,
PS 300, PS 400, PS 500, PS 520, PS 560
Channel with Knock-Outs ("KO" Type - Power-Strut) (Stock)
Channel with Slotted Back ("SB" Type - Power-Strut Only)
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400,
PS 500, PS 520, PS 560
PS 200 Only
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400,
PS 500, PS 520, PS 560
Stock
PS 100, PS 150, PS 200, PS 210, PS 300, PS 400
PS 200 Only
¾"
RS-MOD (with 3/4" Dia. Holes)
130 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STRUT - CHANNEL
PS 200
• 10’ Pre-Galvanized
• 20’ Pre-Galvanized
• 10’ Green
• 20’ Green
• 10’ Stainless Steel
• 20’ Stainless Steel
• 10’ HDG
• 20’ HDG
• 20’ Aluminum
Ordering Note: Please specify PS 210 if you
require 14 gauge 1-5/8” x 1-5/8” channel
10’Solid 20’Solid 10’SlottedEH 20’SlottedEH
Plain x x x x
Pre-Galvanized PS200EG10 PS200GE20 PS200EHEG10 PS200EHEG20
Green PS200GR10 PS200GR20 PS200EHEGR10 PS200EHGR20
HotDipGalv. PS200HDG10 PS200HDG20 PS200EHHDG10 PS200EHHDG20
304S/S PS200SS10 PS200SS10 PS200EHSS10 PS200EHSS20
316S/S x x x x
Aluminum PS200AL10 PS200AL20 PS200EHAL10 PS200EHAL20
PVCCoated PS200PVC10 PS200PVC20 PS200EHPVC10 PS200EHPVC20
Fiberglass /AIC20P2000 N/A /AIC20P2200 N/A
PS 210
Ordering Note: PS 500 14 gauge is standard. If you
require 12 gauge, please specify PS 520 12 gauge.
PS 500
• 10’ Pre-Galvanized
• 20’ Pre-Galvanized
• 10’ Green
• 20’ Green
• 10’ Stainless Steel
• 20’ Stainless Steel
10’Solid 20’Solid 10’SlottedEH 20’SlottedEH
Plain x x x x
Pre-Galvanized PS500EG10 PS500GE20 PS500EHG10 PS500EHEG20
Green PS500GR10 PS500GR20 PS500EHGR10 PS500EHGR20
HotDipGalv. x x x x
304S/S x x x x
316S/S x x x x
Aluminum N/A N/A N/A N/A
PVCCoated x x x x
Fiberglass N/A N/A N/A N/A
Size Max.Load(lb) Black6’ E.G.6’
1/4 240 25C600Thread 25C600Thread
3/8 730 37C600Thread 37C600Thread
1/2 1,350 50C600Thread 50C600Thread
5/8 2,160 62C600Thread 62C600Thread
3/4 3,230 75C600Thread 75C600Thread
7/8 4,480 87C600Thread 87C600Thread
1 5,900 100C600Thread 100C600Thread
Ordering Note: Threaded rod in stock 6’, 10’ and 12’ lengths.
Studs cut to any length. Stocked in larger diameters.
Call for availability over 1” diameter.
• Carbon steel plain and
zinc plated
• Hot dip galvanized
• Stainless steel
Type 304 and Type 316
• B7 (ASTM A193)
• Fiberglass
131
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STRUT - CHANNEL
10’Solid 20’Solid 10’SlottedEH 20’SlottedEH
Plain x x x x
Pre-Galvanized PS150EG10 PS150EG20 PS150EHEG10 PS150EHEG20
Green PS150GR10 PS150GR20 PS150EHGR10 PS150EHGR20
HotDipGalv. x x x x
304S/S N/A N/A N/A N/A
316S/S N/A N/A N/A N/A
Aluminum N/A N/A N/A N/A
PVCCoated x x x x
Fiberglass N/A N/A N/A N/A
10’Solid 20’Solid 10’SlottedEH 20’SlottedEH
Plain x x x x
Pre-Galvanized PS2002T3EG10 PS2002T3EG20 PS2002T3EHEG10 PS2002T3EHEG20
Green PS2002T3GR10 PS2002T3GR20 PS2002T3EHGR10 PS2002T3EHGR20
HotDipGalv. PS2002T3HDG10 PS2002T3HDG10 x x
304S/S x x x x
316S/S x x x x
Aluminum N/A N/A N/A N/A
PVCCoated x x x x
Fiberglass N/A N/A N/A N/A
PS 200 2T3: 1-5/8” x 1-5/8” x 12 gauge welded channel
PS 200 2T3): 1-5/8” x 1-5/8” x 12 gauge welded channel
• 10’ Pre-Galvanized
• 20’ Pre-Galvanized
• 10’ Green
• 20’ Green
• 10’ Pre-Galvanized
• 20’ Pre-Galvanized
• 10’ Green
• 20’ Green
PS 150: 1-5/8” x 2-7/16” x 12 gauge
132 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SLOTTED ANGLE
• 10’ Pre-Galvanized
• 20’ Pre-Galvanized
• 10’ Green
• 20’ Green
PS 100: 1-5/8” x 3-1/4” x 12 gauge
10’Solid 20’Solid 10’SlottedEH 20’SlottedEH
Plain x x x x
Pre-Galvanized PS100EG10 PS100EG20 PS100EHEG10 PS100EHEG20
Green PS100GR10 PS100GR20 PS100EHGR10 PS100EHGR20
HotDipGalv. x x x x
304S/S N/A N/A N/A N/A
316S/S N/A N/A N/A N/A
Aluminum N/A N/A N/A N/A
PVCCoated x x x x
Fiberglass N/A N/A N/A N/A
PS 200 KO6: 1-5/8” x 12 gauge with KO
6” on center
10’ Pre-Galvanized
20’ Pre-Galvanized
Raceway Closure Strip (Green
and Pre-Galvanized)
Plastic Closure Strip
10’ Pre-Galvanized
10’ Pre-Galvanized
10’ Pre-Galvanized
1-5/8” x 1-5/8” x 14
gauge
1-5/8” x 2-3/8” x 14
gauge
1-5/8” x 3-1/8” x 12
gauge
133
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RACEWAY CONCRETE INSERT CHANNEL
This system is designed for maximum
ease of attaching fixture through slotted
channel with shoulder bolt and provides
positive alignment.
Note: Specify “S” Type Slotted Channel
PartNo. SectionHeight
PS100 3-1/4
PS150 2-7/16
PS200 1-5/8
PS210 1-5/8
PS300 1-3/8
PS400 1
PS500 1-3/16
PartNo. SectionHeight
PS100KO6 3-1/4
PS150KO6 2-7/16
PS200KO6 1-5/8
PS210KO6 1-5/8
PS300KO6 1-3/8
PS400KO6 1
Listed by Underwriter’s Laboratories, Inc.
Fixture is attached to slot-up channel with
Chase nipple, locknut and bushing through
knock-outs in bottom of channel. Conduit
connector fitting PS-2561 holds channel and
fixture to pipe or rod.
Choice of end cap is based on the distance from the end of
the insert to the first anchor as shown below.
Note: A full line of fittings and
accessories are available to fit
junior size channel.
Usew/ Wt.per
PartNo. Insert Finish 100pcs.
PS656 PS349PGAL 8
PS901 PS449PGAL 6
134 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CHANNEL NUT SELECTION CHART
PS LS PS SS PS RS PS NS PS NS S PS 517 PS TG PS 3281
PS 100
3-1/4" ✔ ✔ ✔ ✔
PS 150
2-7/16" ✔ ✔ ✔ ✔
PS 200
1-5/8" ✔✔ ✔✔✔
PS 210
1-5/8" ✔✔ ✔✔✔
PS 300
1-3/8" ✔✔ ✔✔✔
PS 400
1" ✔ ✔ ✔ ✔ ✔
PS 500
13/16" ✔ ✔ ✔ ✔ ✔
PS 520
13/16" ✔ ✔ ✔ ✔ ✔
PS 560
13/16" ✔ ✔ ✔
The Slip-On Lock (R) Lock Nut has been developed with
the ability to be positioned on threaded rod at any point,
without the time consuming nuisance of threading.
Just open the Slip-On Lock Nut and insert where needed.
Twist close and tighten with a wrench. It’s that simple.
See page 173 for ordering information
"The force in strut fittings"
NUTS
CHANNEL
135
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SPRING (CHANNEL) NUTS
"Long Spring Nuts" PSLS
Superstrut (H-100)
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/4 PSLS 1/4EG
3/8 PSLS 3/8EG
1/2 PSLS 1/2EG
5/8 PSLS 5/8EG
3/4 PSLS 3/4EG
"Short Spring Nuts" PSSS
Superstrut (B-100)
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/4 PSSS 1/4EG
3/8 PSSS 3/8EG
1/2 PSSS 1/2EG
5/8 PSSS 5/8EG
"No Spring Regular"
PSNS
Superstrut (AB-100)
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/4 PSNS 1/4EG
5/16 X
3/8 PSNS 3/8EG
1/2 PSNS 1/2EG
5/8 PSNS 5/8EG
3/4 PSNS 3/4EG
7/8 PSNS 7/8EG
"No Spring Shallow"
PSNSS
Superstrut (AC-100)
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/2 PSNSS 1/4EG
5/8 PSNSS 3/8EG
3/4 PSNSS 1/2EG
"Caddy Slick™ Strut Nut"
Standard: Dacromet 320 finish
Fast universal attachment of threaded rod and hardware
to standard strut profiles. Reduces installation time by
over 75%.
Features:
• Fits all standard strut depths.
• Installs with one hand.
• No more hard to handle spring nuts
• Reduce installation time and hardware by 60%
• Integral plastic strip provides tension to grip
strut, even vertically.
• Allows for easy repositioning or removal.
Part No. Thread Size
SLICK250 1/4-20
SLICK375 3/8-16
SLICK500 1/2-13
"Stud Nut" PS 517
Regular Spring Nut w/Stud
Standard: EG - Zinc Plated (Electro-Galvanized)
Size EG Size EG
1/4 x 1 X 3/8 x 1-1/2 X
1/4 x 1-1/2 X 3/8 x 2 X
1/4 x 2 X 1/2 x 1 X
3/8 x 1 X 1/2 - 1-1/4 X
3/8 x 1-1/4 X 1/2 - 1-1/2 X
1/2 x 1 X 1/2 - 2 X
"Twirl-Nut®"
B-Line Top Lock
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/4 25 CTNUZ
3/8 37 CTNUZ
1/2 50 CTNUZ
"Top Lock" Cone Nuts
PSTG
Standard: EG - Zinc Plated
(Electro-Galvanized)
Size EG
1/4 PSNS 1/4EG
3/8 PSNS 3/8EG
1/2 PSNS 1/2EG
"Regular Spring Nuts" PSRS (Superstrut A-100)
Standard: EG - Zinc Plated (Electro-Galvanized)
Also Available: HDG - Hot-Dipped Galvanized & Stainless Steel -
Size EG HDG SS
8-32 X N/A N/A
10-24 X N/A N/A
10-32 X N/A N/A
1/4 PSRS 1/4EG PSRS 1/4HDG PSRS 1/4SS
5/16 X N/A N/A
3/8 PSRS 3/8EG PSRS 3/8HDG PSRS 3/8SS
1/2 PSRS 1/2EG PSRS 1/2HDG PSRS 1/2SS
5/8 PSRS 5/8EG PSRS 5/8HDG PSRS 5/8SS
3/4 PSRS 3/4EG PSRS 3/4HDG X
7/8 PSRS 7/8EG PSRS 7/8HDG X
136 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STRUT FITTINGS
- Degree Range
7-1/2° — 82-1/2°
- Degree Range
7-1/2° - 82-1/2°
Degree Range
7-1/2° — 82-1/2°
137
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
POST BASES - BRACKETS
Pipe No InsulationThickness
Size Insulation 1” 1-1/2” 2” 2-1/2” 3” 4”
1/2 6-1/2 61/2
3/4 6-1/2 6-1/2 6-5/8 6-7/8
1 6-1/2 6-1/2 6-5/8 6-7/8
1-1/4 6-1/2 6-1/2 6-7/8 7-1/8 7-3/8
1-1/2 6-1/2 6-1/2 6-7/8 7-1/8 7-3/8
2 6-1/2 6-5/8 7-1/8 7-3/8 7-1/2 8
2-1/2 6-1/2 6-5/8 7-1/8 7-3/8 7-1/2 8
3 6-1/2 7 7-1/2 7-3/4 7-7/8 8-1/8
3-1/2 6-1/2 7 7-1/2 7-3/4 7-7/8 8-1/8
4 6-5/8 7-1/4 7-5/8 7-7/8 8 8-3/8 9
A Uniform Wt.per
Size Load* 100Pcs
6 1,200 185
12 600 293
18 400 401
24 300 509
A Uniform Wt.per
Size Load* 100Pcs
12 2,000 502
18 1,300 692
24 1,000 882
30 800 1,072
36 650 1,262
*Mounted on 12 ga Channel
*Mounted on 12 ga Channel
*Mounted on 12 ga Channel
Uniform Wt.per
Size A B Load* 100Pcs
8 8-1/2 4 800 168
10 10-1/2 4 800 202
12 12-1/2 6 900 258
14 14-1/2 6 900 292
16 16-1/2 6 1,200 381
18 18-1/2 6 1,200 416
20 20-1/2 6 1,000 461
A Uniform
Size Load*
6 1,600
12 800
18 600
24 450
138 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BEAM CLAMPS & STRUT FITTINGS
Part Uses Finish Wt.per
No. with A 100pcs
PS902 PS100 EG 3-1/4 22
PS2580 PS150 EG 2-7/16 18
PS655 PS200 EG 1-5/8 11
PS2585 PS210 EG 1-5/8 12
PS656 PS300 EG 1-3/8 15
PS901 PS400 EG 1 11
PS930 PS500 EG 13/16 5
Part Uses Wt.per
No. with 100pcs.
PS-6153-1 PS100 5.0
PS-6153-2 PS-200, 2.8
PS-210
PS-6153-3 PS-300 2.5
PS-6153-5 PS-500, 2.0
PS-520,
PS-560
*See Page 195 for more Beam Clamp information
Note: 7/8” max flange
thickness
SizeBlackEG
3/837CWMT37
CWMTZ
1/250CWMT50
CWMTZ
5/862CWMT62CWMTZ
3/475CWMT75CWMTZ
Size Black EG
3/8 37CJTB 37CJTBZ
1/2 50CJTB 50CJTBZ
5/8 62CJTB 62CJTBZ
Load
Set Rating Weight 100
PartNo. Thickness Screw perlb Pcs.
PS907 1/4 3/8 450 26
PS998 3/8 1/2 900 64
Size NoLocknut WithLocknut
3/8 37CCCL 37CCCN
1/2 50CCCL 50CCCN
5/8 62CCCL 62CCCN
3/4 75CCCL 75CCCN
Size MaxLoadNo.
1/4 150
3/8 350
1/2 400
139
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PORCELAIN CLAMPS & STRUT FITTINGS
Sizes:1/2”,3/4”,1”,1-1/4”,
1-1/2”,2”,2-1/2”,3”,3-1/2”,
4”,
5”,6”
3/8”Rod:1/2”,3/4”,1”,1-1/4”,1-
1/2”,2”
1/2”Rod:2-1/2”,3”,3-1/2”,
5/8”Rod:4”,5”3/4”Rod:6”,
7/8”Rod:8”
Sizes;3/8”,1/2”,3/4”,1”,1-1/4”,
1-1/2,2”,2-1/2”,3”,3-1/2”,4”
Sizes:1/2”,3/4”,1”,1-1/4”,
1-1/2,2”,2-1/2”,3”,3-1/2”,4”
To order, specify part number
and hole size according to the
table below.
• Replaces porcelain and maple
cable clam
• Non-breakable TPE material
• U.V. resistant
• U.L. listed
• Stainless steel clamps
• Tapered flange to protect cable
• Dielectric strength 525 Volts
per mil.
• One piece
• For use in accordance with
National Electrical Code ANSI/
NFPA 70
Hole PS1100
Size Size A B
3/8 1 1-7/8 1-15/32
1/2
5/8
3/4 1-1/2 2-3/8 2-1/32
7/8
1
1-1/8
1-1/4 2 2-7/8 2-17/32
1-3/8
1-1/2
1-5/8
1-3/4 3 4 3-5/8
1-7/8
2
2-1/8
2-1/4 3-/12 4-1/2 4-1/8
2-3/8
2-1/2
2-5/8
Hole PS1100
Size Size A B
2-3/4 4 5-1/8 4-5/8
2-7/8
3
3-1/8
3-1/4 5 6-1/8 5-11/32
3-3/8
3-1/2
3-5/8
3-3/4 6 7-1/4 6-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
To order, specify part number
and hole size according to the
table below.
140 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE AND CONDUIT CLAMPS (STRUT STRAPS)
PartNo. Size
PS1100-3/8” 3/8
PS1100-1/2” 1/2
PS1100-3/4” 3/4
PS1100-1” 1
PS1100-1-1/4” 1-1/4
PS1100-1-1/2” 1-1/2
PS1100-2” 2
PS1100-2-1/2” 2-1/2
PS1100-3” 3
PS1100-3-1/2” 3-1/2
PS1100-4” 4
PS1100-5” 5
PS1100-6” 6
PS1100-8” 8
PS1100-10” 10
PS1100-12” 12
PartNo. Size
PS1000-1/2” 1/2
PS1000-3/4” 3/4
PS1000-1” 1
PS1000-1-1/4” 1-1/4
PS1000-1-1/2” 1-1/2
PS1000-2” 2
PartNo. Size
PS1300-1/2” 1/2
PS1300-3/4” 3/4
PS1300-1” 1
PS1300-1-1/4” 1-1/4
PS1300-1-1/2” 1-1/2
PS1300-2” 2
PartNo. Description
S-716 Cush-A-Strip 20 ft per box
• Please specify E.G.
(Galvanized) or CT
(Copper)
• Specify O.D. Size
(Not nominal
copper
tubing size)
PartNo. Size
PS1200-1/4” 1/4
PS1200-3/8” 3/8
PS1200-1/2” 1/2
PS1200-5/8” 5/8
PS1200-3/4” 3/4
PS1200-7/8” 7/8
PS1200-1” 1
PS1200-1-1/8” 1-1/8
PS1200-1-1/4” 1-1/4
PS1200-1-3/8” 1-3/8
PS1200-1-1/2” 1-1/2
PS1200-1-5/8” 1-5/8
PS1200-1-3/4” 1-3/4
PS1200-1-7/8” 1-7/8
PS1200-2” 2
PS1200-2-1/8” 2-1/8
PS1200-2-1/4” 2-1/4
PS1200-2-3/8” 2-3/8
PS1200-2-1/2” 2-1/2
PartNo. Size
PS1200-2-5/8” 2-5/8
PS1200-2-3/4” 2-3/4
PS1200-2-7/8” 2-7/8
PS1200-3” 3
PS1200-3-1/8” 3-1/8
PS1200-3-1/4” 3-1/4
PS1200-3-3/8” 3-3/8
PS1200-3-1/2” 3-1/2
PS1200-3-5/8” 3-5/8
PS1200-3-3/4” 3-3/4
PS1200-3-7/8” 3-7/8
PS1200-4” 4
PS1200-4-1/8” 4-1/8
PS1200-4-1/4” 4-1/4
PS1200-4-3/8” 4-3/8
PS1200-4-1/2” 4-1/2
PS1200-4-5/8” 4-5/8
PS1200-43/4” 4-3/4
PS1200-4-7/8” 4-7/8
PartNo. Size
PS1200-5” 5
PS1200-5-1/8” 5-1/8
PS1200-5-1/4” 5-1/4
PS1200-5-3/8” 5-3/8
PS1200-5-1/2” 5-1/2
PS1200-5-5/8” 5-5/8
PS1200-5-3/4” 5-3/4
PS1200-5-7/8” 5-7/8
PS1200-6” 6
PS1200-6-1/8” 6-1/8
PS1200-6-1/4” 6-1/4
PS1200-6-3/8” 6-3/8
PS1200-6-1/2” 6-1/2
PS1200-6-5/8” 6-5/8
PS1200-6-3/4” 6-3/4
PS1200-6-7/8” 6-7/8
Available in sizes up
thru 8-5/8” O.D.
Assembly consists of thermoplastic
elastomer cushion with plated or
stainless steel clamp.
Plated steel supplied with Everdur
bolt and nut, stainless clamp with
stainless bolt and nut.
PS 722 Z - Plated
PS 722 S - Stainless
• Non-breakable material
• UV resistant
• U L listed
• Tapered flange to protect cable
• Dielectric strength 640 volts per
mil
• One piece
• Flame retardant
• Exceptional chemical resistant
Hole PS1100
Size Size A B
3/8
thru 1 1-7/8 1-15/32
5/8
3/4
thru 1-1/2 2-3/8 2-1/32
1-1/8
1-1/4
thru 2 2-7/8 2-17/32
1-5/8
1-3/4
thru 3 4 3-5/8
2-1/8
2-1/4
thru 3-1/2 4-1/2 4-1/8
2-5/8
2-3/4
thru 4 5-1/8 4-5/8
3-1/8
3-1/4
thru 5 6-1/8 5-11/32
3-5/8
3-3/4
thru 6 7-1/4 6-3/4
4-1/2
141
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUSH-A-CLAMP® / HYDRA-ZORB™
PipeSize Hydrazorb
PartNo. (Nominal) #
PS009N 1/4 20025
PS011N 3/8 20037
PS014N 1/2 20050
PS017N 3/4 20075
PS021N 1 200100
PS027N 1-1/4 200125
PS030N 1-1/2 200150
PS038N 2 200200
PS046N 2-1/2 200250
PS056N 3 200300
PS064N 3-1/2 200350
PS072N 4 200400
PS089N 5 200500
PS106N 6 200600
Copper& Copper
Steel Water
Tube Pipe
PartNo. O.D.Size (Nominal) Hydrazorb#
PS004T 1/4 - 100025
PS006T 3/8 1/4 100037
PS008T 1/2 3/8 100050
PS010T 5/8 1/2 100062
PS012T 3/4 5/8 100075
PS014T 7/8 3/4 100087
PS016T 1 - 100100
PS018T 1-1/8 1 100112
PS020T 1-1/4 - 100125
PS022T 1-3/8 1-1/4 100137
PS024N 1-1/2 - 100150
PS026N 1-5/8 1-1/2 100162
PS028N 1-3/4 - 100175
PS030N 1-7/8 - 100187
Copper& Copper
Steel Water
Tube Pipe
PartNo. O.D.Size (Nominal) Hydrazorb#
PS032N 2 - 100200
PS034N 2-1/8 - 100212
PS038N 2-3/8 - 100237
PS040N 2-1/2 - 100250
PS042N 2-5/8 - 100262
PS046N 2-7/8 - -
PS048N 3 - 100300
PS050N 3-1/8 - 100312
PS056N 3-1/2 - -
PS058N 3-5/8 - 100362
PS064N 4 - -
PS066N 4-1/8 - 100412
PS072N 4-1/2 - -
PS082N 5-1/8 - -
Pipe Tube Conduit
Sched40 CastIron Sched10
Size Sched80 AWWA S/S Copper S/S EMT Rigid
3/8 0.675 0.675 0.500 0.375 0.577
1/2 0.840 0.840 0.625 0.500 0.706 0.840
3/4 1.050 1.050 0.875 0.750 0.922 1.050
1 1.315 1.315 1.125 1.000 1.163 1.315
1-1/4 1.660 1.660 1.375 1.250 1.510 1.660
1-1/2 1.900 1.900 1.625 1.500 1.740 1.900
2 2.375 2.375 2.125 2.000 2.197 2.375
2-1/2 2.875 2.875 2.625 2.500 2.875 2.875
3 3.500 3.960 3.500 3.125 3.000 3.500 3.500
3-1/2 4.000 4.000 3.625 3.500 4.000 4.000
4 4.500 4.800 4.500 4.125 4.000 4.500 4.500
5 5.563 5.125 5.000 5.563
6 6.625 6.900 6.126 6.000 6.625
8 8.625 9.050
10 10.750 11.100
12 12.750 13.200
14 14.000 15.650
16 16.000 17.800
18 18.000 19.920
20 20.000 22.060
24 24.000 26.320
Notes:
1) Sched 40 and 80 PVC pipe is the same as steel pipe.
2) Copper tube OD is 1/8” larger than nominal size.
3) EMT and Rigid conduit over 2” are the same OD’s.
4) There are other types of cast iron and ductile iron pipes
that have different OD’s.
5) We sell hangers, clamps and supports that fit on the OD’s
of pipes.
142 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Strut-mounted Klo-Shure
Coupling supplied with two
clamp halves,
fastener, and locknut.
Klo-Shure Couplings
currently support tub-
ing from 1/4” to 4-1/8”
diameter.
Klo-Shure Couplings
currently can be used to
secure insulation from
3/8” to 1” thick.
Klo-Shure Couplings are pre-scored
and can be opened for placement
around tubing.
Standard Klo-Shure
coupling for use with
clevis hangers.
KLO-SHURE® INSULATION COUPLING SYSTEMS
• Installs in seconds!
• One piece design
• Supports tubing and secures insulation
• Eliminates insulation compression
• No metal clamps
• Superior vapor barrier
• Improved finish - no tape, no glue
• Meets the 25/50 flame spread / smoke
developed index
Ideal for securing tubing
insulation at strut-
mounted clamps
7 Series
• 7 series clamps come
complete with strap and
insert (2 pieces)
• Sized for O.D. tubing
1/4" - 4-1/8"
• Insulation wall thickness
3/8" - 1/2"; 3/4" - 1" and
1-1/2"
P/N Tube Description
1/2" Insulation O.D.
824050 1/2" 1/2" x 1/2"
824062 5/8" 5/8" x 1/2"
824087 7/8" 7/8" x 1/2"
824112 1-1/8" 1-1/8" x 1/2"
824137 1-3/7" 1-3/8" x 1/2"
824162 1-5/8" 1-5/8" x 1/2"
824212 2-1/8" 2-1/8" x 1/2"
3/4" Insulation
826062 5/8" 5/8" x 3/4"
826087 7/8" 7/8" x 3/4"
826112 1-1/8" 1-1/8" x 3/4"
826137 1-3/7" 1-3/8" x 3/4"
1" Insulation
828087 7/8" 7/8" x 1"
828112 1-1/8" 1-1/8" x 1"
828137 1-3/7" 1-3/8" x 1"
828162 1-5/8" 1-5/8" x 1"
828212 2-1/8" 2-1/8" x 1"
8 Series
New Klo-Shure 8
Series, Our clampless
insulation coupling
Accomodates elasto-
meric and fiberglass
tubing insulation up
to 1” thick
2 Piece
Klo-Shure System
143
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CLIC®-X STRUTCATCHER SYSTEM
CLIC®-X / Strutcatcher System
Clic®-x
The One-Piece Automatic Locking
Pipe/Tube/Conduit Support and
Hanger
Insert pipe, tube, conduit or cable into
the open Clic-x, apply slight pressure to
the tubular member and the jaws close
and lock. A sharp “clic” indicates the pipe/
tube/conduit/cable is securely fastened. It’s that simple.
• Easy change out
• Allows on site
prefabrication
• Non-magnetic
• Work with screw-gun
Advantages
• Ease of installation
• Non-corrosive
• Work on top of strut
• Cost effective
Copper ClicPartNo. ClicPartNo.
NominalDia. TubeO.D. forCopper forPipe
1/8 - - #10
- 5/16”O.D. #8 -
1/4 3/8”O.D. #10 #12
3/8 1/2”O.D. #12 #17
1/2 5/8”O.D. #15 #20
5/8 3/4”O.D. #17 -
3/4 7/8”O.D. #20 #25
1 1-1/8”O.D. #28 #32
1-1/4 1-3/8”O.D. #32 #40
1-1/2 1-5/8”O.D. #40 #47
2 2-1/8”O.D. #51 #59
2-1/2 2-5/8”O.D. - #71
3 3-1/8”O.D. #71 #80
4 4-1/8”O.D. - #113
TradeSize EMT IMC Rigid PVC
1/2 PartNo. #17 #20 #20 #20
Qty./Ctn. 100 100 100 100
ConduitO.D. 0.706” 0.815” 0.840” 0.840”
3/4 PartNo. #22 #25 #25 #25
Qty./Ctn. 100 50 50 50
ConduitO.D. 0.922” 1.029” 1.050” 1.050”
1 PartNo. #28 #32 #32 #32
Qty./Ctn. 50 50 50 50
ConduitO.D. 1.163” 1.290” 1.315” 1.315”
1-1/4 PartNo. #36 #40 #40 #40
Qty./Ctn. 50 25 25 25
ConduitO.D. 1.510” 1.638” 1.660” 1.660”
1-1/2 PartNo. #40 #47 #47 #47
Qty./Ctn. 25 25 25 25
ConduitO.D. 1.740” 1.883” 1.900” 1.900”
2 PartNo. #51 #59 #59 #59
Qty./Ctn. 20 20 20 20
ConduitO.D. 2.197” 2.360” 2.375” 2.375”
2-1/2 PartNo. #71 #71 #71 #71
Qty./Ctn. 25 25 25 25
ConduitO.D. 2.875” 2.857” 2.875” 2.875”
3 PartNo. #80 #80 #80 #80
Qty./Ctn. 25 25 25 25
ConduitO.D. 3.500” 3.475” 3.500” 3.500”
4 PartNo. #113 #113 #113 #113
Qty./Ctn. 25 25 25 25
ConduitO.D. 4.500” 4.486” 4.500” 4.500”
ClicTemperaturerange-40°to+180°Fcontinuously,andto+225°F
intermittently,withinstallationto-5°F.
LT-101 Flange
• For use with Clic #8 through #59
• Stainless Steel 316 Alloy
• Permits 1/4” threaded rod to mate with
Clic via screw hole in base of Clic
LT-109 Strutcatcher
• Permits anchoring Clic to strut in shop or on the
ground without cutting into strut.
• For use with Clic No. 15
through No. 113
• Made from Nylon 12 Grilamid
LT-109-2 Strutcatcher
• For use with Clic No. 15
through No. 59
• Made from Nylon PA12
• Recommended for light duty applications
Insert Strutcatcher
into strut
Twist Strutcatcher 90°
and it locks into place
Mount Clic onto
Strutcatcher with a screw
Clic-X with LT-109
Strutcatcher installed
on strut
Selection Chart
Be sure to visit
www.GoNefco.com
for the latest Innovative
Products for Strut!
144 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SNAP-N-STRUT™ / EZ-STRUT™ STRUT CLAMPS
EZ-Strut™ System Strut Clamps
Silencer 257-P
A strong, sound rated variable
closure clamp. Two acoustical inserts
isolate the pipe from the support
structure, reducing piping noise and
vibration, while allowing normal pipe
expansion and contraction. Clamp
supports up to 1" CTS tubing sizes.
Supports Copper, PEX, CPVC tubing,
conduite, etc. Framework complies
with UL 94V-2 fire rating.
Part No. Description Box Qty.
257 w/o Acoustical Silencer 50
257-P w/ Acoustical Silencer 50
Silencer 287-P
A strong, sound rated variable closure
clamp. Two acoustical inserts isolate
the pipe from the support structure,
reducing piping noise and vibration,
while allowing normal pipe expansion
and contraction. Clamp supports 1"
to 2" CTS/IPS pipe sizes. Supports
Copper, PEX, CPVC tubing, conduit,
etc. Framework complies with UL
94V-2 fire rating..
Part No. Description Box Qty.
287 w/o Acoustical Silencer 50
287-P w/ Acoustical Silencer 50
Strut-N-Rod Hanger
Can be snapped into a strut or threaded onto a rod -
without the use of extra hardware or tools. The pipe is
simply snapped into the hanger and locked in place using
the snug-fit size-adjusting lock arm.
To Order Strut-N-Rod: Add PSNR to end of Part Number
To Order Handy-Snap: Add HS to end of Part Number
Part Sch. Rigid Max.
No. 40 & 80 O.D. Conduit EMT Load
SNS1216 1/4 5/8 1/4 - 170
SNS1720 3/8 3/4 3/8 1/2 195
SNS2124 1/2 7/8 1/2 1/2 215
SNS2529 3/4 1-1/4 3/4 - 315
SNS3034 1 - 1 1 320
SNS3538 - 1-3/8 - 1-1/4 342
SNS4044 1-1/4 1-5/8 1-1/4 1-1/2 365
SNS4854 1-1/2 2-1/8 1-1/2 - 380
SNS5663 2 - 2 2 410
SNS6673 2-1/2 2-5/8 2-1/2 2-1/2 500
SNS7993 3 3-5/8 3 3 600
Strut-N-Rod
(Strut Mounted) (Rod Mounted)
Handy-Snap
(Wall Mounted)
CUSH-A-CLAW™ Strut Clamps
• Easy, snap-in installation of tube,
pipe or hose.
• Sure-Grip strut base rotates
easily into strut.
• Will not rust, non-conductive.
• Temperature Range: -50° to 275° F.
• For indoor or outdoor use
• Designed for light-duty loads and applications.
• Prevents galvanic corrosion of dissimilar metals.
O.D. Tube Size
Part
No.
Size Range
O.D. Size Inches
CL06 3/8" 0.375
CL08 1/2" 0.500
CL-10 5/8" 0.625
CL-12 3/4" 0.750
CL-14 7/8" 0.875
CL-18 1-1/8" 1.125
EMT Conduit Size
EMT-1/2 1/2" 0.706
EMT-3/4 3/4" 0.922
EMT-1 1" 1.163
145
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MINERALLAC® JIFFY CLIPS / CONDUIT STRAPS
• These one-hole pipe
straps are ideal for
hanging tubing, pipe,
conduit and BX cable.
Standard Jiffy Clips
Finishes:
Pre-Galvanized Steel / Everdur / Copper Plated
Part No. Copper Marking
Zinc Everdur Copper Tube Size on Clip
102 102-E 102-C 1/8" —
103 103-E 103-C 3/16" 1
105 105-E 105-C 1/4" —
110 110-E 110-C 5/16" —
115 115-E 115-C 3/8" 115
125 125-E 125-C 1/2" 125
135 135-E 135-C 3/4" 750
150 150-E 150-C 1" 150
165 165-E 165-C 1-1/2" 1-1/4"
Part No. Fits Marking
Zinc Everdur Copper EMT Size on Clip
130 130-E 130-C 1/2" 130
145 145-E 145-C 3/4" 145
155 155-E 155-C 1" 1"
165 165-E 165-C 1-1/4" 1-1/4"
Part No. Fits Rigid Marking
Zinc Everdur Copper Conduit & Pipe on Clip
120 120-E 120-C 1/8" 120
125 125-E 125-C 1/4" 125
140 140-E 140-C 1/2" 140
150 150-E 150-C 3/4" 150
160 160-E 160-C 1" 1"
170 170-E 170-C 1-1/4" 1-1/4"
121 Fits BX Cable —
MED-80 — — 1-1/2" —
MED-90 — — 2" —
H-92 — — 2-1/2" —
H-94 — — 3" —
H-95 — — 3-1/2" —
H-96 — — 4" —
H-97 — — 5" —
H-98 — — 6" —
2-Hole Conduit Straps
Finishes: Pre-Galvanized / Zinc Plated after
Fabrication / Everdur / Stainless Steel
• Two-hole metal straps are designed for use on loads
too heavy to be supported by one-hole Jiffy Clips
Part No. Fits
Zinc Hot-Dip Everdur Stainless EMT
230 230-G 230-E 230-SS 1/2"
245 245-G 245-E 245-SS 3/4"
255 255-G 255-E — 1"
265 255-G — — 1-1/4"
275 255-G — — 1-1/2"
285 255-G — — 2"
292 255-G — — 2-1/2"
294 255-G — — 3"
Part No. Fits Rigid
Zinc Hot-Dip Everdur Stainless Conduit / Pipe
225BX — 225-EBX Fits BX Cable
225 225-G 225-E — 1/4"
228 228-G 228-E — 3/8"
240 240-G 240-E 240-SS 1/2"
250 250-G 250-E 250-SS 3/4"
260 260-G 260-E — 1"
270 270-G — — 1-1/4"
280 280-G — — 1-1/2"
290 290-G — — 2"
292 292-G — — 2-1/2"
294 294-G — — 3"
Caddy® Pipe Sleeve Positioner
• Requires only a hammer
to install
• Will accommodate
Schedule #40, #80 and
smaller wall thickness
• Provides secure
positioning of pipe sleeve
for concrete pouring of
wall and floor forms
Part No. Fig No. Sleeve Diameter Wall Thickness
740 1 All Diameter 5/16” and under
740 1 2”-6” Schedule #40 Pipe
4H58 2 6” Schedule #80 Pipe
4H58 2 8”-10” Schedule #40 Pipe
4H912 2 9”-14” Schedule #80 Pipe
146 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE TRAY SYSTEMS
Legend
1 StraightSection,Ladder(SL)
2 HorizontalElbow,90°,Ladder
Type(9F)
3 HorizontalElbow,30°,45°or60°
(3F,4F,6F)
4 HorizontalCross,Ladder
Type(FC)
5 HorizontalTee,LadderType(FT)
6 VerticalElbow,Outside,90°(90)
7 VerticalElbow,OutsideandInside,
30°,45°,or60°(30,31,40,60,61)
8 VerticalTee,SolidBottomTrof
Type(VT)
9 StraightSection,SolidBottom
Trof(SL)
10 FlangedSolidCover(FS)
11 BarrierStrip-StraightSection(SB)
12 BarrierStrip-Flexible-Horizontal
Fitting(FB)
13 StraightSection,CopeChannel
(SL)
14 BlindEnd(BE)
15 BoxConnector(BC)
16 AngleConnector(CA)
17 ReducingConnector(CO)
18 UniversalCurvilinearConnector
(RC)
Cable Tray Details
• Length - 12’ x 24’
• Width - 6”, 9”, 12”, 18”, 24” 30”
or 36”
• Overall Height - Load depth +
1.25”
• Fittings
• Interconnection pieces to combine
or change direction in either
horizontal or vertical
• Elbows, tees and crosses
• Standard radii curves or 12”, 24”
or 26” with 9” rung spacing
• Tray Material
1. Aluminum
2. Pre-Galvanized
3. Hot dip galvanized after
fabrication
4. 304 or 316 stainless
steel
5. Fiber Reinforced Plastic
• Tray Class
1. Cable loads plus
additional loads per
foot; support span;
safety factor
2. Catalog number
3. NEMA Class
• Tray Depth
1. Overall height of side
rail - 4”, 5”, 6” or 7”
2. Loading Depth - 3”, 4”,
5”, or 6”
• Tray Type
1. Ladder - rung spacing
6”, 9” 12” or 18”
2. Trough - solid or
ventilated
Materials
• Aluminum
• Stringers
• Tubing
• Steel
• Mild Carbon Steel
Special Materials
• Stainless Steel
Standard Finishes
• HDGAF
• Mill Galvanize
• PVC
• Tray Width
1. Ladder - 6”, 9”, 12”,
18”, 24”, 30” 36”, or
42”
2. Trough - 6”, 9”, 12”,
18”, 24”, 30”, or 36”
3. Channel - 3”, 4” or 6”
• Length of Straight Sections
1. 12’ or 24’
• Fittings
1. Radius - 12”, 24”, 36”
or 48”
• Miscellaneous
1. Expansion splice
location
2. Barrier strip
3. Support type - Trapeze
Kit, Center Hung, Wall
Bracket, Hanger Rod
Clamp
Your cable tray specification should be reviewed for every
project. The following items must be included to ensure
the proper installation is made.
Best Choice
For Most
Applications
• Most Economical
• Most flexible
• Most Common
147
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE TRAY SYSTEMS
• Choice for smaller cables
• Prevents sagging
• Limits access
• Ideal for multiple number of small
cables
• Used to provide EMI/RFI shields
Part No. 7-HGR1 (Steel)
Part No. 8-HGR1 (Aluminum)
Sold individually
T200E Assembly
T201E Assembly
Tray Width Weight Load Rating Span (lb/ft)
in (mm) (lb/@10’) 5’ (1.4 m) 6’(2 m) 10’(3 m)
2 (50) 4.8 13.4 5.4 3.4
4 (100) 5.8 19.5 8.1 6.0
6 (150) 9.3 28.9 12.1 7.3
8 (200) 10.3 28.9 12.1 7.3
12 (300) 14.4 36.3 14.4 9.5
16 (400) 20.5 70.5 33.6 18.4
20 (500) 26.7 94.1 43.8 25.2
Straight sections are available in seven widths: 2”, 4”, 8”, 12”,
16” and 20”. The nominal depth/height for each width is 3” and
stocking 10’ lengths.
The chart was developed to
permit a quick performance check
of continuous beam deflection for
a particular load/span installation.
Rung Width Rung Spacing
W R
in mm Part No. in mm
1153-0321 3 75
1113-0321 6 150
6 150 1123-0321 9 225
1133-0321 12 300
1143-0321 18 450
1153-0322 3 75
1113-0322 6 150
9 225 1123-0322 9 225
1133-0322 12 300
1143-0322 18 450
1153-0323 3 75
12 300 1113-0323 6 150
1123-0323 9 225
1133-0323 12 300
1153-0324 3 75
18 450 1113-0324 6 150
1123-0324 9 225
1153-0325 3 75
24 600 1113-0325 6 150
1123-0325 9 225
• Standard 12’ (3.6 m)
lengths (Canada 3 m
lengths)
• Change fourth digit of
all catalog numbers to
a 6 for 6” (150 mm)
deep tray
• Change fourth digit of
all catalog numbers to
a 4 for 4” (100 mm)
deep tray
• Optional rung caps
available. Catalog
number 0800-0710.
Field installed
Height and width of all
trays indicated in this
catalog shows loading
area - not overall size
of tray.
• Waste Water
Treatment
• Semi Conductor
• Deionized Water
Facilities
• Chemical
• Petrochemical
• Aquariums
• Pulp and Paper
• Utilities
• Plating Facilities
• Marinas
• Theme Parks
• Pharmaceuticals
• OEMs
148 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE TRAY SYSTEMS
MONO-SYSTEMS INC.
UNIQUE CABLE DISTRIBUTION SYSTEMS
We have consistently supplied a broad line of high
quality cable trays to the construction industry for
many years. Typical materials offered are alumi-
num, fiberglass, mill-galvanized steel, hot-dipped
galvanized steel, stainless steel and PVC coated
trays.
Ladder cable tray has two longitudinal side mem-
bers connected by individual transverse members,
designed for use as power cable or control cable
support.
Channel cable tray consists of a one-piece, venti-
lated or solid bottom channel section, designed for
use with a single power cable or multiple control or
signal circuit cables.
Trough cable tray consists of a ventilated or solid
bottom contained within longitudinal side mem-
bers, for use with control and instrumentation
cables.
Single Rail, Center-Supported cable tray systems
save time and money in those lighter-duty cable sup-
port projects that do not require a traditional dual side
rail cable tray.
Solid Bottom cable tray provides reliable cable sup-
port in corrosive applications. Both polyester and vinyl
ester resin systems are available and all components
incorporate U.V. inhibitors and a surfacing veil to resist
corrosive elements.
Fiberglass cable tray provides reliable cable support
in corrosive applications. Both polyester and vinyl ester
resin systems are available and all components incor-
porate U.V. inhibitors and a surfacing veil to resist cor-
rosive elements.
Wire Mesh cable tray offers double the cable support
area to better support data communication and fiber
optic cabling in addition to saving time and money in
those lighter-duty cable support projects.
YOUR COMPLETE SOURCE
FOR CABLE TRAY
150 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FIBERGLASS STRUT SYSTEM
Fiberglass Strut - Channel Framing Materials Selection
Polyester
(90% Market Share)
• Good general all-
purpose resin system
• Less expensive than
vinylester
• Comparable beam
strength to vinylester
• Polyester is well
acceptable and
understood in the
marketplace
• UV and flame resistant
• Color coded gray
Vinylester
• Premium grade resin
system
• Price premium
• Customer driven
• UV and flame resistant
• Color coded beige
PVC
(Max. Use: 2' Sections)
• Least expensive channel
offered
• Light duty applications
• Not recommended for
excessive beam loading
applications
• UV and flame resistant
• Color coded dark gray
Heavy Duty Channel
Aickenstrut Profile 20P-2000, 20V-2000
• Specify “PCR” pipe
clamps only. Do not use
with metallic pipe clamps
Standard Profiles
Standard
20P-2000-SST
20V-2000-SST
Slotted
20P-2200-SST
20V-2200-SST
With Concrete Inserts
20P-2300-SST
20V-2300-SST
Back-To-Back
20P-2100-SST
20V-2100-SST
Fiberfast Hex Bolts and Hex Nuts
HEX BOLTS
Part Size Thread Shank Shoulder Torque
No. (in.) Shear* Shear* Length (ft./lbs.)
375PU-125 3/8 x 1-1/4 250 lb. 470 lb. Full 3
375PU-150 3/8 x 1-1/2 250 lb. 470 lb. 1/4" 3
375PU-200 3/8 x 2 250 lb. 470 lb. 1/2" 3
375PU-250 3/8 x 2-1/2 250 lb. 470 lb. 3/4" 3
375PU-300 3/8 x 3 250 lb. 470 lb. 1" 3
625PU-125 5/8 x 1-1/4 700 lb. 1,360 lb. 1/4" 12
625PU-150 5/8 x 1-1/2 700 lb. 1,360 lb. 1/4" 12
625PU-200 5/8 x 2 700 lb. 1,360 lb. 1/4" 12
625PU-250 5/8 x 2-1/2 700 lb. 1,360 lb. 1/4" 12
625PU-300 5/8 x 3 700 lb. 1,360 lb. 1/4" 12
625PU-350 5/8 x 3-1/2 700 lb. 1,360 lb. 1-1/4" 12
*Thread shear values shown represent a 3:1 safety factor
HEX NUTS
Part Size Thread Height Torque
No. (in.) Shear* (in.) (ft./lbs.)
250PU-000 1/4 x 20 150 lb. 0.218 10 (in./lbs.)
375PU-000 3/8 x 16 460 lb. 0.328 3
500PU-000 1/2 x 13 800 lb. 0.437 8
625PU-000 5/8 x 11 1,000 lb. 0.546 12
*Thread shear values shown represent a 3:1 safety factor
Fiberfast
Flat Washers
Part
No. Size O.D.
250E-999 1/4" 0.49"
375E-999 3/8" 1.00"
500E-999 1/2" 1.25"
625E-999 5/8" 1.50"
750E-999 3/4" 1.50"
1000E-999 1" 2.25"
Channel Fittings
20P-2500
20V-2500 (flat)
20P-2800
20V-2800 (grooved)
Call for information on sizes
and types of fittings available
• Specify “STD” pipe clamps only. May also be used
with metallic pipe clamps
151
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FIBERGLASS STRUT SYSTEMS
Molded Clevis Hangers - Fiberglass
Max. Hanger Dimensions
Part Nominal Pipe “A” “B” “C” Rod load
No. Diameter O.D. Dim. Dim. Dim. (in) (lb)*
CVHPU-100 1/2" 1" 1.500" 4.25" 1.25" 1/2 670
CVHPU-150 1-1/4" 1-1/2" 2.000" 5.14" 1.25" 1/2 670
CVHPU-200 1-1/2" 2" 2.500" 6.52" 1.25" 1/2 730
CVHPU-400 2-1/2" 4" 5.125" 10.00" 1.50" 1/2 1,150
CVHPU-600 4-1/2" 6" 6.750" 12.33" 1.50" 1/2 1,170
*Design load values shown represent a 3:1 safety factor
Rigid Pipe Clamps - Fiberglass
“STD” “PCR” PVC, Design FRP FRP
Part Part Nominal Sched. 80 Loads* Bolt Bolt Torque
No. No. Size Rigid Metal Type 1 Type 2 Size (in) (ft/lb)
STD-050 PCR-050 1/2" 0.840 225 90 3/8 x 1-1/4 3
STD-075 PCR-075 3/4" 1.050 225 90 3/8 x 1-1/4 3
STD-100 PCR-100 1" 1.315 225 90 3/8 x 1-1/4 3
STD-125 PCR-125 1-1/4" 1.660 225 90 3/8 x 1-1/4 3
STD-150 PCR-150 1-1/2" 1.900 225 90 3/8 x 1-1/4 3
STD-200 PCR-200 2" 2.375 225 90 3/8 x 1-1/4 3
STD-250 PCR-250 2-1/2" 2.875 225 90 3/8 x 1-1/4 3
STD-300 PCR-300 3" 3.500 225 90 3/8 x 1-1/4 3
STD-400 PCR-400 4" 4.500 300 125 3/8 x 1-1/4 3
STD-600 PCR-600 6" 6.625 300 125 3/8 x 1-1/4 3
STD-800 PCR-800 8" 8.625 300 125 3/8 x 1-1/4 3
*Design load values shown represent a 3:1 safety factor
Standard Duty
Channel Nuts -
Fiberglass
Part Size Torque
No. (in.) (ft./lb.)
250PU-CN 1/4-20 2
312PU-CN 5/16-18 2
375PU-CN 3/8-16 3
500PU-CN 1/2-13 3
10PU-CN 10mm 3
12PU-CN 12mm 3
10PU-CNS #10 Screw 3
• Thread shear - 460
lbs. Represents a 3:1
safety factor.
Molded Beam
Clamps -
Fiberglass
• Thread shear - 460
lbs. Represents a 3:1
safety factor.
Part Thread Torque
No. Size (ft./lb.)
375PU-BC 3/8" 10
500PU-BC 1/2" 10
Threaded Rod - Fiberglass
Part Size Thread Wt Torque
No. (in.) Shear* per ft. (ft./lbs.)
200-3827 3/8 x 16 470 lb. 0.07 5
200-3828 1/2 x 13 570 lb. 0.12 10
200-3829 5/8 x 11 1,600 lb. 0.18 40
200-3830 1/2 x 13 1,700 lb. 0.28 50
200-3831 1-8 3,000 lb. .050 60
*Thread shear values shown represent a 3:1 safety factor
• Stock Lengths:
4' & 8'
• Special lengths
and threads
are available
on request for
excessive beam loading applications
Part Size Thread Length
No. (in.) Shear* (in.)
200-3840 3/8 x 16 800 lb. 2-1/4
200-3841 1/2 x 13 870 lb. 2-1/4
200-3842 5/8 x 11 1,500 lb. 2-1/4
200-3843 3/4 x 10 1,500 lb. 2-1/4
*Thread shear values shown represent a 3:1 safety factor
• Extend stock fiberglass threaded rod
beyond standard lengths
Rod Couplers - Fiberglass
152 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
NON-METALLIC CABLE RACK
120 lb per
Arm
400 lb per
Arm
Standard Standard Pack
Part Name Part No. Pack Qty. lb cu ft
RackVerticalMember CR36 10 37.3 1.17
LongArm RA20 10 34.9 2.45
MediumArm RA14 10 16.3 1.27
ShortArm RA08 10 11.4 .87
153
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DUCT SPACERS
Standard Unit
• Standard TWO-WAY unit saves up to 50% in handling cost over
ONE-WAY Units.
• THREE- FOUR-, FIVE- and SIX-WAY Units available pre-assem-
bled by special order.
ONE-WAY Unit
• Standard TWO-WAY unit is easily cut-apart to produce two
ONE-WAY units or assemble into THREE-WAYS, FIVE-WAYS, etc.
UDI Wunpeece Duct
Spacers
• Interlockis any com-
bination of duct sizes,
horizontal and vertically
and all types of Duct,
PVC, Steel and Fiber.
• By using random posi-
tioning along the duct
run, Weak areas in the
vertical shear plane in the concrete encasement are eliminated.
• For concrete encasement or direct burial.
Horizontal Changing of Sizes and Interlocking
• Any combination of duct sizes can be connected together to
interlock the duct bank. Telephone ducts can be kept away
from power by letting one spacer be empty.
Vertical Interlocking and Size
Changing
• Turned upright, the Wunpeece allows you
to change sizes and interlock from one
row to the next.
Cantilever Support
• Either right-side-up or upside down (as
shown) a ONE-WAY of any size can be be
connected to a TWO-WAY of any size in a
cantilever-style of construction
Unusual Duct Configurations
• At the right is an example of a "hole in
the middle" arrangement where heat dis-
spation is a concern.
Gage for Concrete
• Positioned upside down on the top row,
the Wunpeece becomes a 3" gage assur-
ing full concrete cover. This also horizon-
tally interlocks two- or more columns of
ducts where upright positioned spacers
are used to interlock vertically. (See ver-
tical interlocking to the upper left).
Gage for Wall Clearance
• Positioned upright on the outside column, the Wunpeece pro-
vides a gage to assure 3" separation from wall of trench.
WUNPEECE CATALOG NUMBERS
Duct Separation
Sizes 1" 1-1/2" 2" 3"
2" 2W20 2W30
3" 3W20 3W30
4" 4W10 4W15 4W20 4W30
5" 5W15 5W10 5W30
6" 6W20 6W30
154 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
C-ClampsBeam Clamps
Square Washers
Drop-In AnchorsPost Bases
Conduit Clips
Strut - Channel
“Deep” (PS 200)
1 5/8" x 1-5/8" x 12 Gauge
“Shallow” (PS 500)
1-5/8" x 13/16" x 14 Gauge
Specify type of Stainless Steel - 304 or 316
Max.
Size Load No.
1/4-20 150
3/8-16 750
1/2-13 1100
Stainless Steel Hangers, Strut and Hardware
Spring (Channel)
Nuts
Pipe & Conduit
Clamps
Bolts, Couplings, Nuts and Washers
Threaded Rods
and Studs
U-Bolt Clevis Hanger Riser Clamp
STAINLESS STEEL STRUT / HANGERS / HARDWARE
155
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® PYRAMID / ROOFTOP SUPPORTS
∙Non-penetrating.
∙Extends roof life.
∙Dampens vibrations.
∙No need for supplemental rubber
pads.
∙Will not float.
∙ Pipe Supports • HVAC Supports
∙ Roof Walkway Supports • Duct
Supports • Conduit Supports
∙ Under Floor Applications
DBP/DBM-Series - Base Only
∙4" H x 6" W x 9.6" L. 100% UV
resistant recycled rubber. Load
capacity: 500 lbs. (uniform load)
∙Approved for any type of roofing
material or other flat surfaces.
DB-Series
Base with 14 ga. Galvanized Channel
∙5" H x 6" W. 100% UV
resistant recycled rubber.
∙Approved for any type of roofing
material or other flat surfaces.
See Pages 236 - 237
for full details
CADDY® PYRAMID
Pipe & Equipment Supports
Features
• Dramatically reduces installation time by replac-
ing labor-intensive methods for supporting pipes,
conduits and equipment
• Supports multiple runs of pipe and conduit on roofs
and below raised floors
• Supports concentrated loads up to 600 lbs
• Absorbs shock and vibration
• Protects roof membrane
• Metal cover protects from weather and other envi-
ronmental conditions
• Features an electro-galvanized finish for corrosion
protection
Max.
Part Fig. Working Strut
Number No. Load (lbs) Height Threads Finish Included?
PPRPS25H4 1 25 3-5/8” – – –
PPRPS25H6 1 25 5-5/8” – – –
RPS50H4EG 2 50 4” – EG –
RPS50H6EG 2 50 6” – EG –
RPS50AHSV*2 50 2-1/4” – SV –
RPS150T1 3 150 3-3/16” 3/8”-16 EG NO
RPS150T2 3 150 4” 3/8”-16 EG YES
RPS300T1 4 300 3-3/16” 3/8”-16 EG NO
RPS300T2 4 300 4” 3/8”-16 EG YES
RPS600T2 5 600 4” 3/8”-16 EG YES
CADDY® PYRAMID 25
• Supports up to 25 lb loads
• Lightweight, all-plastic construction
weighs less than 1/3 lb
• Has a small 4” x 5” footprint
• UV-Rated
• Handles up to three 1/2” or two
3/4” or 1” pipes/conduit
• No tools or fasteners needed for
installation
CADDY® PYRAMID 300
• Supports up to 300 lb loads
• Crosslink polyethylene closed-
cell foam supports the additional
weight; 14 gauge steel top plate
CADDY® PYRAMID 150
• Supports up to 150 lb loads
• Has six 3/8”-16 threaded inserts
with captive nuts that allows the
product to be used with standard
pipe clamps and accessories
• Large 16” x 12” footprint distrib-
utes load more evenly than alterna-
tive methods
• Polyethylene closed-cell foam and
• 14 gauge steel construction
• Electro-galvanized (EG) finish on top
plate for added corrosion protection
CADDY® PYRAMID 50
• Supports up to 50 lb loads
• Polyethylene closed-cell foam and
16 gauge steel construction
• The 4” high model has a 10-3/8” x 4”
footprint
• The 6” high model has a 10-3/8” x
4-3/4” footprint
• Electro-galvanized (EG) finish on the
rooftop version and CADDY® COAT
Silver (SV) on the plenum version pro-
vide superior corrosion protection
• Metal top designed to shed water
and minimize water collection on
foam base
CADDY® PYRAMID 600
• Consists of two CADDY PYRAMID
300 bases tied together with a
length of strut
• Footprint is 32” x 12” (24” x 16”
optional with cutting of strut) for
more even load distribution
• Supports up to 600 lb loads
156 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® BEAM CLAMPS / CLIPS
1/4” - 3/8” Steel Beam Clamp
• Ideal For Electrical, Mechanical and
HVAC Applications
• Ideal for creating a threaded rod
trapeze
Part No. Description Qty Per Box
BC200 Easy installation for beam flanges 50
1/8” to 5/8”
Supports 1/4” threaded rod, 1/4”
threaded bridle rings and boxes
Part No. Description Qty Per Box
BC400 For 3/8” threaded rod or 3/8”-16 25
bolts to beam flange through 3/4”
Sizing Chart
Hammer-On
Plain and
Threaded
Rod Hangers
Beam Clamps
Features:
• Used to suspend
#8 wire, 1/4”, 3/8”
plain rod or 1/4” or
3/8” threaded rod
from beam flanges
1/8” to 3/4” thick.
• Requires only
hammer to install.
Part Fig. Flange Qty
No. No. Thickness Rod Size Per Box
70824 1 1/8”-1/4” #8 wire or 1/4” Plain Rod 100
70858 1 5/16”-1/2” #8 wire or 1/4” Plain Rod 100
708912 1 9/16”-3/4” #8 wire or 1/4” Plain Rod 100
6A24 2 1/8”-1/4” 3/8” (Plain) 100
6A58 2 5/16”-1/2” 3/8” (Plain) 100
6A912 2 9/16”-3/4” 3/8” (Plain) 100
4TI24 3 1/8”-1/4 1/4” Threaded 100
4TI58 3 5/16”- 1/2” 1/4” Threaded 100
4TI912 3 9/16”-3/4” 1/4” Threaded 100
6TI24 3 1/8”-1/4” 3/8” Threaded 100
6TI58 3 5/16”-1/2” 3/8” Threaded 100
6TI912 3 9/16”-3/4” 3/8” Threaded 100
6TA24 4 1/8”-1/4” 1/4” or 3/8” Threaded* 100
6TA58 4 5/16”-1/2” 1/4” or 3/8” Threaded* 100
6TA912 4 9/16”-3/4” 1/4” or 3/8” Threaded* 100
*Nuts required
Sizing Chart
1/4 Electrical Junior Top
Beam Clamp Malleable Iron
100 / box
Applications
Beam Clamps
• Easy installation for beam flanges
1/8” to 5/8
• Supports 1/4” and 3/8” threaded
rod, S-hooks, electrical boxes,
conduit, and bridle rings
Fig. 1
Fig. 3
Fig. 4
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Part Fig Static Qty
No. No. Description Load Limit Per Box
BC 1 Beam clamp thru 100 lbs. 100
1/2” flange
BC812M 3 1/2” to 3/4” conduit to 100 lbs. 100
beam thru 1/2” flange
BC812MSM 4 1/2” to 3/4” conduit to 25 lbs. 100
beam thru 1/2” flange
157
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® BEAM CLAMPS / CLIPS
Hammer-On
Flange Clip
Features:
• When used with CADDY® combination
conduit hanger, the conduit run lines up with
“knock-outs” in outlet box and eliminates
offsets and bends.
• Provided with a 1/4-20 thread impression
so that the box may be quickly and securely
attached to the clamp.
• Also available with a staked stud,
1/4-20 x 3/8” to provide easier attachment of
outlet boxes to beams. Eliminates having to
use loose screws.
• The CADDY combination washer-wing nut
(Part No. 4WN) can be used to attach box.
(Not included.)
• New design allows for use with cable ties
1/4-20 x 3/8”
screws
P/N S3575BP50
available as
separate item.
Packaged 50 per
box. Weight 1 lb .
per 100.
Indicated loads are static
load limits and should not
be combined.
Applications
Part Fig. Flange Qty
No. No. Thickness Per Box
M24 1 1/8”-1/4” 100
M58 1 5/16”-1/2” 100
M912 1 9/16”-3/4” 100
M24S 2 1/8”-1/4” 100
M58S 2 5/16”-1/2” 100
M912S 2 9/16”-3/4” 100
Sizing Chart
Fig. 1
Fig. 2
Hammer-On
Flange Clip
Features:
• Locates a “portable” 1/4”
hole with just a hammer.
• Fits most beams and bulb
tees.
Applications
Part Fig. Flange Qty Static
No. No. Thickness Per Box Load Limit
2H4 1 3/32”-9/64” 100 160 lbs.
4H24 2 1/8”-1/4” 100 200 lbs.
4H58 2 5/16”-1/2” 100 200 lbs.
4H912 2 9/16”-3/4” 100 200 lbs.
Sizing Chart
Fig. 1
Fig. 2
Multi-Flange
Rod Hanger
Features:
• C or Z Purlins or up to 1/4” (7mm)
horizontal beam flanges.
• Slotted, Hex, Robertson, Phillips combo head bolt.
• Hardened cup point setscrew for secure grip.
• Fast installation of threaded components;
(1/4” or 3/8” ).
• Integrated thread impression eliminates nuts.
• Swivel feature option.
• Electrogalvanized finish for good corrosion
protection.
NOTE:
Loads up to 200 lbs. (0.90 kN) on C or Z purlins or
160 lbs. (0.71 kN) on horizontal beams.
Applications
Part Fig. Qty
No. No. Description Thread Per Box
PH4 1 Rod Hanger 1/4-20 25
PH6 1 Rod Hanger 3/8-16 25
PHSW4 2 Rod Hanger w/ swivel 1/4-20 25
PHSW6 2 Rod Hanger w/ swivel 3/8-16 25
Sizing Chart
Fig. 1
Fig. 2
158 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® STUD WALL
Box Mounting
Bracket For
Electric Box
Features:
• Easily attaches 4” and 411/16”
outlet boxes to metal stud (HS3
switch boxes).
• Support leg reduces movement
of box in wall.
• Can be attached to metal or wood
stud.
• Offset design and use of CADDY®
#SMS8 low profile self-tapping
screws (not included) reduce dry
wall bulge.
• Delivers compliance with:
NEC Article 300.4(d) when used
for 4” and 411/16” outlet boxes to
metal or wood studs.
CEC Rule 12-3012 for 4” and
411/16” outlet boxes to metal or
wood studs.
Part Fig. Box Stud Qty
No. No. Application Sizes Depth Per Box
H23 1 U.S. 4” sq. & 411/16” 2-1/2” & 3-1/2” 100
H4 1 U.S. 4” sq. & 411/16” 4” 50
H6 1 U.S. 4” sq. & 411/16” 6” 50
HS3 2 U.S. & Canada Switch 2-1/2” & 3-1/2” 100
Applications
Not listed?
NEFCO stocks other
Stud Wall Fasteners.
Call today for complete
listing
Screw Gun
Box Bracket
For Between Studs
Features
• Can mount multiple 11/2” or 21/8”
deep boxes. Notched and marked for
easy identification and bending.
• Improved design with stamped inch
markings and pilot holes accelerates
precise box and conduit mounting
between studs.
• Pilot holes allow easy box
attachment with a screwdriver.
• Requires only a screw gun to install.
• Reduces movement of the box when
used with flexible conduit, ENT, MC,
AC or ROMEX.®
• Can be mounted on face or inside of
stud.
SGB (Preset)
• Preset for studs 16” or 24” on center.
• Can be preassembled by the contrac-
tor to allow for greater production at
the job site.
TSGB (Adjustable)
• Adjustable for non-standard stud
spacing.
• Unique, one-piece, break apart
design.
• Interlocking tab prevents accidental
disassembly.
Minimum of
one mounting
screw required
on each side of
the bracket.
No more
time -con-
suming field
fabrication
with scrap
floor track.
Applications
Part Fig. Stud Box
No. No. Description Spacing Depth
SGB16A† 1 Preset 16” OC 1-1/2” or 2-1/8”
SGB24A†† 1 Preset 24” OC 1-1/2” or 2-1/8”
TSGB16* 2 Adjustable 11” to 18” 1-1/2” or 2-1/8”
TSGB24* 2 Adjustable 17” to 26” 1-1/2” or 2-1/8”
Sizing Chart
Fig. 1
Fig. 2
SGB Preset
TSGB
Adjustable
“Colorado Jim”
Cable Support
NEC® Compliance
For Stud
Features
• New easy-to-use locking
tab.
• Cable locating ribs to
maintain cable
separation.
• Flared edges for cable
protection.
Applications
Part Cable Cable Cables
No. Type Size Per Fastener
CJ6 Non-Metallic 14-2, 12-2, 10-2, 14-3 6 Max
to Wood Sheathed Cable 12-3, and 10-3 w/ ground
8-2 and 6-2 w/ ground 4 Max
Sizing Chart UL & cUL Listed
Positioning Only
CJ6
CJ6S
159
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® STUD WALL
Floor Mounted
Box/Conduit
Supports
For Concrete Forms
Features
• Supports electrical boxes
from floor
or concrete forms.
• Available in 12”, 16” and
18” heights.
• Slot provides for 8” height
adjustment.
• Use FBS with CCS812 to
support conduits
in concrete pours.
• CCS812 eliminates offset
bending
of conduit.
• CCS812 also works with
TSGB and SGB
Applications
Part Fig. Qty
No. No. Description Per Box
FBS12 1 12” High box support 50
FBS16 1 16” High box support 50
FBS18 1 18” High box support 50
CCS812 2 1/2” or 3/4” EMT - 1/2” RIGD 100
Sizing Chart
UL & cUL Listed
Positioning Only
Fig. 1
Fig. 2
FBS CCS812 Box Mounting
Brackets
For Between Studs
Features
• Supports electrical
boxes, plaster rings or low
voltage devices from one
bracket.
• Accommodates up to
four 4” or 411/16” boxes.
• Mounts 11/2” or 21/8”
deep boxes.
• Eliminates the need for
an electrical box on low
voltage applications.
Applications
Minimum of one
mounting screw
required on each
side of the bracket.
Part Qty
No. Description Per Box
RBS16 Mounts up to three 4” or 411/16” 25
boxes/plaster rings 16” bracket
RBS24 Mounts up to four 4” or 411/16” 50
boxes/plaster rings 24” bracket
Sizing Chart
RBS16
RBS24
160 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® CONDUIT / CABLE
Flexible Conduit
and Cable Hanger
Features
• Bundle runs* of MC or AC or
communications cables.
• Can be used with flange clips
or deck clip DH2. Also AO or
AB, VF14, AF14, 122-123.
*Refer to local authorities and
NEC Article 310 for derating
ampacity when flexible power
cables are used.
Applications
Ultimate static load limit
75 lbs. - WMX6,
50 lbs. - WMX3
Number of Runs Ultimate
of MC/AC Cable Static
Part Fig That May Be “A” Load Qty
No. No. Supported Dim. Rating Per Box
WMX3 1 3 1-1/8” 50 lbs. 100
WMX6 2 6 1-3/4” 75 lbs. 100
Sizing Chart
WMX
Fig.1
Fig.2
“A”
Dia.
Conduit
Hangers
From Flange,
Wire or Plain Rod*
Features
• Supports conduit (EMT, Rigid,
ENT, MC/AC and Aluminum) to
rods* or flanges.
• Can also be used for: flexible
metallic tubing, armored cable,
portable cables, control tubes,
communications cable, etc.
• No installation tools required.
NOTE: May require dedicated
drop wire/rod and EC311
(See Pgs. 34, 45, 190)
– Consult local authority.
*For horizontal application only.
Applications
Cable Wire Sizes Qty
Size #12 #10, #9, #8 Per Box
14-2 (.433-.475 O.D.) KX KX 100
14-3 (.453-.500 O.D.) KX KX 100
12-2 (.467-.510 O.D.) KX KX 100
12-3 (.489-.535 O.D.) KX K8 100
KX - No load rating - positioning only
KX
KX
The original
“Bat Wings”
in 1959
Sizing Chart
Flange-Mount
Conduit Clip
Snap Close
Features
• Available with CADDY®
CONDUIT CLIP bottom mounted
or side mounted.
• Available for 3/8” thru 2” EMT,
rigid and aluminum conduit.
• Requires only hammer and pliers
to install.
• Will pivot thru 360°.
Applications
Fig 1 Fig. 2 Qty
Part No. Part No. Description Per Box
6M24 6M24SM 3/8” MC/AC cable to 1/8” - 1/4” flanges 100
6M58 6M58SM 3/8” MC/AC cable to 5/16” - 1/2” flanges 100
6M912 6M912SM 3/8” MC/AC cable to 9/16” - 3/4” flanges 100
812M24 812M24SM 1/2” to 3/4” conduit to 1/8” - 1/4” flanges 100
812M58 812M58SM 1/2” to 3/4” conduit to 5/16” - 1/2” flanges 100
812M912 812M912SM 1/2” to 3/4” conduit to 9/16” - 3/4” flanges 100
Hammer-On Flange
Clip
Part Fig. Flange Qty Static
No. No. Thickness Per Box Load Limit
2H4 1 3/32”-9/64” 100 160 lbs.
4H24 2 1/8”-1/4” 100 200 lbs.
4H58 2 5/16”-1/2” 100 200 lbs.
4H912 2 9/16”-3/4” 100 200 lbs.
Fig. 1 Fig. 2
Fig. 1 Fig. 2
161
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® CONDUIT / CABLE
Universal One-Piece
Strut Clamp
Features
• One-piece construction.
• Retained bolt and built-in nut
prevents dropping of loose parts.
• One size fits EMT and Rigid.
• Installs with screwdriver,
standard wrench or nut driver.
• Break in half and install.
• Works with most struts.
• Bright zinc finish.
Part Number Static Load
Mild Fig. EMT Mild Qty
Steel Aluminum* No. Rigid Steel Aluminum Per Box
SK85I SK8ALA 1 1/2” 200 150 100
SK125I SK12ALA 1 3/4” 200 150 100
SK165I SK16ALA 1 1” 200 150 100
SK205I SK20ALA 1 11/4” 200 150 100
SK245I SK24ALA 1 11/2” 200 150 50
SK325I SK32ALA 1 2” 200 150 50
SK405I SK40ALA 2 21/2” 350 200 50
SK485I SK48ALA 2 3” 350 200 50
SK565I SK56ALA 2 31/2” 350 200 25
SK645I SK64ALA 2 4” 350 200 25
Sizing Chart
Applications
SK Series
One-Piece
Strut Clamp
SCH Series
Features
• One-piece installation
means no screws or bolts to
drop.
• Installs quickly and easily.
Requires only a screwdriver
or nut driver for installation.
• Heavy-duty construction
with a bright zinc finish.
• Size 3/8” MC/AC to 4” EMT
conduit.
• All sizes available with load
distribution plate attached to
screw.
Applications
Cable Static Qty
Part Fig. O.D. Load Per
No. No. EMT Rigid Range Limit Box
SCH8 1 1/2” — — 200 100
SCH12 1 3/4” 1/2” — 200 100
SCH16 1 1” 3/4” — 200 100
SCH20 1 1-1/4” 1” — 200 100
SCH6B 2 3/8” MC/AC — .10” – .63” 200 100
SCH8B 2 1/2” — .34” – .71” 200 100
SCH12B 2 3/4” 1/2” .57” – .92” 200 100
SCH16B 2 1” 3/4” .72” – 1.16” 200 100
SCH20B 2 1-1/4” 1” 1.00” – 1.51” 200 100
SCH24B 2 1-1/2” 1-1/4” 1.25” – 1.74” 350 50
SCH32B 2 2” 1-1/2” 1.74” – 2.20” 350 50
SCH40B 3 — 2” 2.00” – 2.38” 350 25
SCH48B 3 2-1/2” 2-1/2” 2.38” – 2.88” 350 25
SCH56B 3 3” 3” 2.72” – 3.50” 350 25
SCH64B 3 3-1/2” 3-1/2” 3.25” – 4.00” 350 10
SCH72B 3 4” 4” 3.85” – 4.50” 350 10
Sizing Chart
Bright Zinc
Finish
SCH Series
Fig. 1
Fig. 2
Fig. 3
Fig. 1
Fig. 2
Conduit
Clamps
with Bolts
Features
• Fast and easy installation –
Installs with screwdriver or nut
driver.
• Accommodates 1/2” thru 4”
EMT or rigid conduit.
• Mounting hole size CD0 thru
CD3 for 1/4” bolt. CD4 thru CD9
for 5/16” bolt.
Available in 3/8” mounting hole
for 1/2” - 2” pipe. To order add
suffix 37 (i.e. CD2B37).
• Retained bolt and built-in nut
means there are less parts to
handle or drop. Bright zinc finish.
• Can be used in locations where
EMT or rigid conduit is used.
Also available in stainless steel 302.
Contact ERICO® for price and delivery.
To order add suffix SS (ie. CD2B-SS).
Stainless do not have nutless feature.
Part Fig.. Conduit Size Qty
No. No. Rigid EMT Per Box
CD0B* 1 1/2” 1/2” 100
CD1B* 1 3/4” 3/4” 100
CD2B* 1 1 1 100
CD2.5B* 1 – 1-1/4” 100
CD3B* 1-1/4” 1-1/2” 100
CD4B* 1 1-1/2” – 50
CD5B* 1 2 2 50
CD6B 2 2-1/2” 2-1/2” 25
CD7B 2 3 3 25
CD8B 2 3-1/2” 3-1/2” 10
CD9B 2 4 4 10
See Page 133 for Assemblies (BC200 Series).
CD0B through CD5B are UL & cUL Listed and
meet or exceed UL Test Requirements
Sizing Chart
CD Series
3/8” Mounting
Hole Available
Fig. 1
Fig. 2
Applications
* Aluminum SKs do not have a thread
impression. An aluminum nut and bolt are
provided. Order with no “A” on end for
standard steel bolt and nut.
162 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® CONDUIT / CABLE
RIGID Pipe Clamp
One-Piece
Features
• Supports rigid pipe to strut
• Handles heavy loads
• One -piece design incorporates
a retained bolt and built-in nut
• Installs with either a screwdriver
or a nut driver
• Full line is available to fit a
wide range of pipe sizes
• Available in various materials and
finishes
Applications
Part Pipe Size Load Qty
No. Nominal O.D. (lbs .) Per Box
RIGD0050XX* 1/2” 0.840 400 100
RIGD0075XX* 3/4” 1.050 400 100
RIGD0100XX* 1” 1.315 600 100
RIGD0125XX* 11/4” 1.660 600 100
RIGD0150XX* 11/2” 1.900 800 100
RIGD0200XX* 2” 2.375 800 100
RIGD0250XX* 21/2” 2.875 800 100
RIGD0300XX* 3” 3.500 800 100
RIGD0350XX* 31/2” 4.000 1000 100
RIGD0400XX* 4” 4.500 1000 100
Sizing Chart
* XX denoted finish available: EG - Electro-Galvanized,
CG - Yellow Chromate,
S4 - Stainless 304, S6 - Stainless 316, HD - Hot Dipped
Galvanized, AL - Aluminum.
Contact ERICO for Copper Applications.
3/8”, 5”, 6”, 8”, 10”, 12” available without one -piece
design, retained combo-head bolt,
or built-in nut.
Heavy
Duty
Clamp
Combination
Box/Conduit
Hangers From
Drop Wire/Rod
And Beam
B18 Series
Features
• One riveted assembly.
• No conduit bends
(beam application).
• 66% less Drop Wires
(rod/wire application).
• Delivers with NEC & CEC
compliance, refer to the
2005 CADDY Code Compliance
Book.
NOTE: May require dedicated
drop wire/rod and EC311
(See Pgs. 34, 45, 190)
– Consult local authority.
For single and multiple runs
of conduit.
Applications
Part Fig. Description Qty
No. No. Mounts 4” Sq. Boxes With Per Box
812MB18 1 1/2” & 3/4” conduit from #12 wire thru 1/4” rod 25
812MB186 1 1/2” & 3/4” conduit to 3/8” plain or threaded rod 25
16MB18 1 1” conduit from #12 wire thru 1/4” rod 25
16MB186 1 1” conduit to 3/8” plain or threaded rod 25
6MB18 1 MC, AC cable from #12 wire 25
thru 1/4” flange
6MB186 1 MC, AC cable 3/8” plain or threaded rod 25
812MB18A 2 1/2” & 3/4” conduit plain center 25
hole for screw or threaded rod mount
16MB18A 2 1” conduit plain center hole for screw 25
or threaded rod mount
6MB18A 2 MC, AC cable plain center hole for 25
screw or threaded rod mount
812MB18S 3 1/2” & 3/4” conduit with 25
1/4-20 x 9/16” stud in center hole
812MB1824 4 1/2” & 3/4” conduit to 1/8” thru 25
1/4” flange
812MB1858 4 1/2” & 3/4” conduit to 5/16” thru 25
1/2” flange
16MB1824 4 1” conduit to 1/8” thru 1/4” flange 25
16MB1858 4 1” conduit to 5/16” thru 1/2” flange 25
6MB1824 4 MC, AC cable 1/8” thru 1/4” flange 25
6MB1858 4 MC, AC cable 5/16” thru 1/2” flange 25
*(XXX)CO 5 Factory riveted assembly for multiple 25
conduit clips. Includes mounting plate and center
conduit clips pre-riveted (additional conduit clips
ordered separately). See Fig. 6A.
6M4I 6A 14-2 thru 12-3 MC/AC and 3/8” flexible 100
conduit; 1/4”-20 thread impression
812M4I 6A 1/2” to 3/4” conduit; 100
1/4-20 thread impression
16M4I 6A 1” conduit; 1/4-20 thread impression 100
S3575BP50 6B 1/4 - 20 x 3/8” round head screw 50
4WN 7 1/4”-20 thread impression washer wing nut 100
4TI24 8 1/4” threaded rod to 5/16” thru 1/4” flange 100
4TI58 8 1/4” threaded rod to 5/16” thru 1/2” flange 100
4TI912 8 1/4” threaded rod to 9/16” thru 3/4” flange 100
6TI24 8 3/8” threaded rod to 5/16” thru 1/4” flange 100
6TI58 8 3/8” threaded rod to 5/16” thru 1/2” flange 100
6TI912 8 3/8” threaded rod to 9/16” thru 3/4” flange 100
*To order with B18CO, add the suffix “CO” to any catalog number Figure 1 through
4 above.
Sizing Chart UL & cUL Listed
Box and Conduit Support
Fig. 1
Fig. 5
Fig. 6A
Fig. 6B
Fig. 7
Fig. 8
Fig. 4
Fig. 2
Fig. 3
163
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® ACOUSTICAL
Lay In And Troffer
Light Fixture
Support Clips
Features
• Complies with The National Elec-
trical Code, Article 410.16 Means
of Support.
• Gives a positive method of sup-
porting troffers and lay-ins.
• Fits round or rectangular head
tee bar.
• No installation tools required.
For straight
lip fixtures.
For straight
or upturned
lip fixtures.
Sizing Chart
Applications
Part Qty.
No. Description Per Box
515 Straight lip fixtures 100
515A Upturned or straight lip fixtures 100
515
515A
*For Canadian boxes. ‡Tall grid compatible.
T-Grid
Box Hanger
Features
• Mounts a box to T-grid
in less than 30 seconds.
• Now height adjustable for
various electrical box depths.
• Installs by hand.
• Drop wire for independent
support from clip and/or bar.
• Screws easily to tee bar for
added stability.
• Multiple box installations.
• Double deep box installa-
tions with 512HDXT Extension
Brackets.
• Not permitted for paddle fans.
512HD Series
Standard bar mounts 21/8”
box – break off tabs for
11/2” deep box. Mounts
flush with face of tile.
512HDEEP Series
512HDEEP with
additional 512HDXT
mounts 21/8” deep box
with 11/2” extension ring.
Applications
Part Qty.
No. Description Per Box
512HD‡ Heavy-duty electrical box hanger 25
with box mounting clip – 24” span
512HDTC* Heavy-duty electrical box hanger 25
with box mounting clip – 24”
510HD Box mounting clip can be pur chased 100
separately for multiple box requirements
510HDTC* Box mounting clip can be purchased 100
separately for multiple box requirements
512HDXT‡ Extension bracket 35/8” height (25 sets) 50
512HDEEP‡ Heavy-duty electrical box hanger 25
with extension bracket – 35/8” height
512HDEEPTC* Heavy-duty electrical box hanger 25
with extension bracket – 35/8” height
Ultimate load limit 50 lbs. per bar
Sizing Chart
510HD Series
One 510HD box mounting
clip is included with each
512HD and 512HDEEP.
Applications
Part Qty
No. Description Per Box
S3575BP50 1/4 - 20 x 3/8” round head screw 50
S102438BP* 10-24 1/2” Rnd Hd Robertson screw 50
512 Elec tri cal box hanger - 24” span 50
512TC* Electrical box hanger - 24” span 50
51212 Electrical box hanger - 12” span 50
51220 Electrical box hanger - 20” span 50
51230 Electrical box hanger - 30” span 50
CHB Box mounting clip 100
CHBTC* Box mounting clip 100
512A 8” height adjustable – 24” span 50
512ATC* 8” height adjustable – 24” span 50
Not to exceed 20 lbs. without independent wire support to CHB.
*For Canadian boxes.
CHB can be purchased
separately when more than
one box is required.
Screw furnished
Sizing Chart
Packaged 50 per box.
One CHB mounting
clip is included with
each No. 512.
512
512A
CHB
Snap On
Fixture/
Box Hanger
Features
• Snaps easily onto tee bar.
• Hanger comes complete with box
mounting clip and 1/4-20 screw.
• Supports from acoustical tee bar
as well as main structure with the
use of a drop wire.
• Dual height feature permits 11/2”
deep electrical box to be mounted
flush with tile or off-set 3/4” for
plaster ring.
• 512A is height adjustable up to
8” allowing you to install double
deep boxes, speaker cases and
emergency light fixtures above
acoustical tee.
• Not permitted for paddle fans.
164 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® DATACOMM ITS
CADDY® CABLECAT Capacity Guide
Area Capacity (4-pair) Part
(sq. in.) Cat. 5e Cat. 6 Number
0.60 16 10 CAT12
2.16 50 32 CAT21
3.17 80 50 CAT32
2 x 1.58 80 50 CAT100CM
15.28 300 185 CAT64
20.43 425 265 CAT425
21.00 500 315 CAT200CMLN
32.00 750 470 CAT300CMLN
32.00 750 470 CATTRAX25
3.14 75 47 CAT600
Best Sellers!
Part Fig. Qty
No. No. Description Per Box
Pre-Riveted Factory Assemblies For 2” Diameter Loop
CAT32BC 8 Screw-on 1/8” thru 1/2” flange 40
CAT32BC200 9 Screw-on 1/8” thru 5/8” flange 20
CAT32ESC 10 Easy Strut Clip 40
CAT3224SM 11 Hammer-on 1/8” thru 1/4” flange 40
CAT3258SM 11 Hammer-on 5/16” thru 1/2” flange 40
CAT32912SM 11 Hammer-on 1/2” thru 3/4” flange 40
CAT3224 12 Hammer-on 1/8” thru 1/4” flange – rotates 360º 20
CAT3258 12 Hammer-on 5/16” thru 1/2” flange – rotates 360º 20
CAT32912 12 Hammer-on 1/2” thru 3/4” flange – rotates 360º 20
CAT32VF14 13 1/16” thru 1/4” vertical flange 40
CAT32AF14 14 1/16” thru 1/4” Z purlin 40
CAT324Z34 15 #12 thru 1/4” wire, plain or threaded rod
and 1/8” thru 3/8” flange 40
CAT326Z34 15 3/8” plain or threaded rod and 3/8” thru 9/16” flange 40
CAT32AB 16 Angle Bracket Assembly - 1/4” mounting hole 40
CAT32AFAB3 17 Angle Bracket Assembly - 3/16” mounting hole 40
CAT32AFAB4 17 Angle Bracket Assembly - 1/4” mounting hole 40
CAT32AFAB6 17 Angle Bracket Assembly - 3/8” mounting hole 40
CAT32BCB 18 Screw-on 1/8” thru 1/2” flange rotates 360º 20
CAT32BC200B 19 Screw-on 1/8” thru 5/8” flange rotates 360º 20
CAT32CD1B 21 Under floor support to pedestal 20
CADDY® CABLECAT
Wide Base Cable Support Clips
Sizing Chart 2” Diameter Loops cULus Listed
Cable Support
Fig. 15 Fig. 17 Fig. 8
Fig. 19 Fig. 20 Fig. 21
Fig. 3
CADDY® CABLECAT
Adjustable Cable
Support
Features
• Up to 425 4-pair UTP or 2-strand
fiber optic cable, or 265 CAT6 - 4”
or 6” dia. loop.
• Provides proper support of Cat-
egory 5,
fiber optic and innerduct.
• Multiple sizes and designs available
to attach to a variety of structures.
• Cost effective alternative to expen-
sive cable tray.
• Complies with UL®, cUL®, NEC®
and EIA/TIA requirements for struc-
tured cabling systems.
• Suitable for air handling spaces
(plenum).
Part Fig. Qty.
No. No. Description Per Box
Adjustable Cable Support
CAT425WM 1A Wall mount - vertical surface 10
CAT425 1B 1/4” Threaded rod or horizontal surface 10
CAT425A6 1B 3/8” Threaded rod or horizontal surface 10
Hammer On Flange Clip
CAT42524SM 2 Hammer-on 1/8” - 1/4” flange 10
CAT42558SM 2 Hammer-on 5/16” - 1/2” flange 10
CAT425912SM 2 Hammer-on 9/16” - 3/4” flange 10
Beam Clamp
CAT425BC 3 Screw-on 1/8” - 1/2” flange (rotates 360°) 10
CAT425BC200 4 Screw-on 1/8” - 5/8” flange (rotates 360°) 10
Purlin
CAT425AF14 5 Hammer-on 1/16” - 1/4” Z purlin 10
CAT425VF14 6 Hammer-on 1/16” - 1/4” vertical flange 10
CAT425WMCD1B 7 Under floor pedestal
Sizing Chart
Applications
Fig. 1A
Fig. 1B
Fig. 4
Fig. 2
165
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HANGING SYSTEMS
ISSP Strut Plate
Features
• Allows for easy attachment
of strut between existing rods
• Eliminates precise cutting of
strut and the need for multiple
hardware pieces
• For commercial and indus-
trial applications
• Bolt has locking design to
prevent loosening due to
vibration
Applications
UPC# Part Qty Weight Load
782856 No. DESCRIPTION Per Box Per 100 Rating
45143 ISSPK ISN/ISSP Kit Sets* 10.4 lbs. 220 lbs.
(for 3/8-16 threaded rod)
*Order in sets of 12 – 1 set includes (2) ISSP375 and (4) ISN375
45144 ISSP375 Strut Plate Only (No Hardware) 100 36 lbs. –
Sizing Chart
ISN Smart Nut
Features
• Snaps anywhere on 3/8-16
threaded rod
• Adjustable and removable
• Eliminates excessive threading
into place
• Supports plumbing, HVAC,
electrical
• Reduces installation time
• Ideal when rod ends are not accessible or for
retrofit applications
UPC# Part Weight Load
782856 No. Description Per 100 Rating
45143 ISN375 Smart Nut, 3.1 lbs. 220 lbs.
3/18-16 thread
Sizing Chart
Strap
Hanger Clips
Features
• Simple solution for supporting of
air duct.
• Accepts wider strap widths up to
11/4”.
• The new clips are made from gal-
vanized steel instead of spring steel.
This expands the use to more ap-
plications, especially when used with
other plated parts like our BC200
beam clamp.
NOTE:
Loads indicated are for
CADDY® Fasteners only.
Applications
Part Fig. Flange Load Qty Per
No. No. Thickness Rating Box
MSS24 1 1/8” to 1/4” 200# 50
MSS58 1 5/16” to 1/2” 200# 50
MSS912 1 9/16” to 3/4” 200# 50
MSR24 2 1/8” to 1/4” 200# 50
MSR58 2 5/16” to 1/2” 200# 50
MSR912 2 9/16” to 3/4” 200# 50
MSSBC200 3 1/8” to 5/8” 100# 50
MSRBC200 4 1/8” to 5/8” 100# 50
MSSAFAB3 5 Strap hanger 160# 50
to angle bracket
Sizing Chart
Improved Galvanized
and Plated Components
for more demanding
environments .
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
High Speed Hanger Solutions
for HVAC, Mechanical, Lighting
and other Electrical Services
HID Lighting
Cable Basket Air Handling Units
Spiral Duct
See page 166 for more GRIPPLE Information
166 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GRIPPLE HANGING SYSTEMS
GRIPPLE Trapeze Fitting for Strut
GRIPPLE provides nearly unlimited overhead hanging solutions, designed to save both time and money.
Call us or visit www.gripple.com for a complete listing of GRIPPLE Solutions
167
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Kwic-Locs
The RIZE KWIC-LOC cable lock can be used as a fast and reliable way to
suspend fluorescent lighting, HID's, sound systems, cable trays, and fan units.
Cable locks are to be used on static load applications only.
Features:
• Zinc Housing: One-piece, die-cast, zinc alloy combines major anti-corrosion
properties with strength.
• Locking Wedges: An oil impregnated sintered steel locking wedge is seated
in each of two channels. Both wedges incorporate a release pin for easy
adjustment. Each wedge makes contact with the cable using serrated teeth.
These teeth press onto the cable and spread the load across the length of
the wedge, maximizing grip strength.
• Stainless Steel Springs: Assures the initial engagement of the locking
wedge to the wire rope.
KL-200 Kwic-Loc
The largest of the Kwic-Loc Seeries with the highest safe work load limit; perfect
for hanging sound systems and heavy cable tray.
KL-150 Kwic-Loc
Significantly smaller in size and with a lower safe work load limit than the KL-200, the KL-150 may
be used to hang heavy cable baskets and HID lights.
KL-100 Kwic-Loc
Works on most lighting applications. It can be used to hang fluorescent lights, speakers, busbar
and cable tray to name a few.
KL-50 Kwic-Loc
A solution for lightweight hanging applications. Signs, lighting and gallery displays are the perfect
applications for this size cable lock.
RIZE KWIC-LOC HANGING SYSTEMS
Cut-Away View of Kwic-Loc
Kwic-Loc Range and Selection Guide
Kwic-Loc Size Typical Applications Wire Rope Diameter Safe Working Load
5:1 Safety Factor
Safe Working Load
4:1 Safety Factor
KL-200 Sound Systems,
Heavy Cable Tray
1/8" 25-250 lbs. 25-312 lbs.
3/16" 50-640 lbs. 50-800 lbs.
4 mm 25-180 kg. 25-227 kg.
KL-150 Heavy Cable Basket
HID Lights
3/32" 25-150 lbs. 25-187 lbs.
1/8" 25-225 lbs. 25-281 lbs.
2.5 mm 12-100 kg. 12-125 kg.
3.0 mm 12-120 kg. 12-150 kg.
KL-100
Fluorescent Lights,
Speakers, Busbar,
Cable Tray
1/16" 0-75 lbs. 0-93 lbs.
3/32" 25-150 lbs. 25-187 lbs.
2.0 mm 12-55 kg. 12-68 kg.
2.5 mm 12-100 kg. 12-125 kg.
KL-50 Signs, Lighting, Gallery
Displays
1/32" 0-14 lbs. 0-18 lbs.
3/64" 0-46 lbs. 0-57 lbs.
1.2 mm 0-21 kg. 0-26 kg.
KL-100SK161 Starter Kit - (1) 500' roll 1/16" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
KL-100SK332 Starter Kit - (1) 500' roll 3/32" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
168 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADDY® SPEED LINK LD
Universal Support System
Features
• Ideal in lighting, ductwork, and other instal-
lation projects
• Cost-effective alternative to hack chain,
threaded rod, and associated hardware
• Safe working load of 20kg (44 lb)
• Meets the fire rating requirements for DIN
4102-2 for 30 minutes at 30 percent of
rated load
• 5:1 safety factor
• Sleek low-profile locking device reduces
visual impact
• Adjustable after installation
• Available in stainless steel for applications
where a higher level of corrosion resistance
is required
• Works with a variety of CADDY Fasteners
Article Part Wire Rope Qty
No. No. Length Material Per Bag
195920 SLD15L2 2m (6.6ft) long galvanized steel 20
195925 SLD15L5 5m (16.4ft) long galvanized steel 20
195930 SLD15L10 10m (32.8ft) long galvanized steel 20
195935 SLD15L2S 2m (6.6ft) long stainless steel 2
195940 SLD15L5S 5m (16.4ft) long stainless steel 2
195945 SLD15L10S 10m (32.8ft) long stainless steel 2
CADDY® SPEED LINK LD
Wire rope diameter: 1.5mm (0.059 inch)
Safe working load: 20kg (44 lb)
CADDY® Toggles
A new universal toggle and Y-toggle for CADDY SPEED LINK LD makes over-
head lighting and overhead decking installation even easier. For overhead
decking applications, a universal toggle/wire rope assembly is now available
in 2m (6.6 ft), 5m (16.4 ft), and 10m (32.8 ft) lengths. the part is identical to
standard CADDY SPEED LINK LD, except the hook is replaced with a toggle.
An optional Y-toggle easily hangs lights. It consists of a 500mm (20 in.) or
800mm (31 in.) length of wire repo with a toggle on each end. The center of
the wire rope is looped and crimped.
Part UPC CODE Weight Per Weight Per
No. Description 782856 Box Box (lbs) Box (kg.)
SLD15Y500 CADDY SPEED LINK Y-Toggle; 500mm (20in) leg length 58417 20/bag; 5 bags/box 4.0 1.8
SLD15Y800 CADDY SPEED LINK Y-Toggle; 800mm (32in) leg length 58418 20/bag; 5 bags/box 4.5 2.0
SLD15L2T CADDY SPEED LINK Y-Toggle; 2m (6.6 ft) long 58419 20/bag; 5 bags/box 8.7 4.0
SLD15L5T CADDY SPEED LINK Y-Toggle; 5m (16.4ft) long 58420 20/bag; 5 bags/box 17.7 8.0
SLD15L10T CADDY SPEED LINK Y-Toggle; 10m (32.8 ft) long 58421 20/bag; 5 bags/box 27.7 12.6
CADDY® Speed Link Tools & Accessories
Article Part Box Weight Per Weight Per
No. Number Description Qty Box (lbs) Box (kg.)
195851 SLADCP Air Duct Corner Protector 10 0.7 0.3
195852 SLADS Air Duct Support Attachment 100 1.3 0.6
195853 SLWC Wire Cutter 1 0.7 0.3
195859 SLWPT Wire Insulation Protection Tube 25 M 3.8 1.7
195860 SL1214 Cable Clip 12-14mm 100 1.1 0.5
195861 SL1518 Cable Clip 15-18mm 100 1.2 0.6
195863 SLLC250 Lighting Clip, 6mm 200 1.5 0.6
195854 SLEBM6 Eye Bolt M6; 30mm long 100 3.3 0.7
195856 SLEBM8 Eye Bolt M8; 40mm long 100 2.5 1.4
195858 SLEBWS Eye Bolt for Wood, H6; 60mm long 100 1.2 1.1
SLADS SLLC250 SLWC
SLWPT SLADCP
SL1518, SL1214 SLEBWS
CADDY® SPEED LINK
169
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STRUT ENGINEERED SERVICES / TECHNICAL SALES
• Engineer and Design per Plans and Specifications • P.E. Stamped Documents and Drawings
• Fabricate and Supply • Supports Located on Drawings
• Detailed Submittals • Pipe Stress Analysis (if required)
• Field Walk-Through & Verification
• Medical Equipment Supports
• Pipe Supports
• Laboratory Supports
• Ceiling Support Grids
• Material Layout & Take
Off
• Tray Design
• Tray Supports (Strut
Trapeze & Hardware)
• Telecom – Datacom
Racks
• Take Offs
• Detailed Submittals
• Stamped Engineering
P.E. Drawings and
Details
• Design and Locate
• Fabricate and Supply
UNISTRUT®
www.unistrut.com
New-Innovative Products
Slot Adapter™
Kwik Washer™
Missing Link
Cut-N-Strut™
New-Innovative Products
171
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
H1F/B25 Coil Hex Nuts
Quick Reference
Threaded Rod
Threaded Rod
Anchor Bolts . . . . . . . . . . . . 176 - 178
B-7 Rod & Studs . . . . . . . . .172 - 173
Custom Fabrication. . . . . . . .176 - 178
Fish Plates.................. 178
Hook Bolts . . . . . . . . . . . . . .176 - 177
Rod Couplings . . . . . . . . . . . . . . . 174
Stainless Steel Rod. . . . . . . . . . . . 173
Studs..................176 - 177
Technical Load Data . . . . . . . . . . . 172
Threaded Rod. . . . . . . . . . . . 172 - 173
Threaded Studs . . . . . . . . . . 174 - 175
U-Bolts . . . . . . . . . . . . . . . .176 - 177
Coil Threaded Items
High Tensile Steel
William® B1S High Tensile
Tie Rods,
B55 Pigtail Anchors, B7S and B8S
Continuous Coil Thread Rod
H1F Standard
Bolt Diameter *S.W.L.
-Pitch lb/kN
1/2” - 6 3,675 / 16.5
3/4” - 4-1/2 9,000 / 40.0
1” - 3-1/2 18,750 / 83.4
* Working loads based on 2 to 1 safety factor.
Maximum
Working
Safe* Load to Average
Thread Thread Working Elastic Ultimate
Dia. Pitch Load Limit Strength
in Coil V lb lb lb
(mm) Thd. Thd. (kN) (kN) (kN)
1/2 6 13NC 9,000 13,000 18,000
(10) (40.0) (57.8) (80.1)
3/4 4-1/2 10NC 19,000 30,000 38,000
(20) (84.5) (133.5) (169.0)
1 3-1/2 8NC 37,500 60,000 75,000
(25) (166.8) (266.8) (333.5)
* Based on approximate 2 to 1 Safety Factor.
Now
Stocking-
Anchor
Bolts Williams® H1F Standard coil nuts are
available to match any Williams® coil bars.
Two nuts are recommended for assurance
of a full ultimate strength.
172 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
THREADED ROD
Full Size Range - Threaded Rod
* Fine thread and left hand thread available
Contractor / MRO
1-1/4, 1-1/2 and 1-3/4 are sold in single pieces
of 6, 10 or 12 feet.
2 diameter and larger available on request.
Feet per Bundle
Rod Size 6 ft Plain 10 ft Zinc Plated 12 ft Zinc Plated
1/4-20 300 500 600
3/8-16 150 250 300
1/2-13 72 120 144
5/8-11 48 80 96
3/4-10 30 50 60
7/8-9 24 40 48
1-8 12 20 24
Maximum Safe Weight
Nominal Rod Diameter Load Pounds 650O per ft
1/4 240 0.12
5/16 300 0.20
3/8 730 0.30
1/2 1350 0.54
5/8 1810 0.85
3/4 2710 1.20
7/8 4480 1.70
1 5900 2.25
1-1/8 6230 2.80
1-1/4 9500 3.50
1-3/8 9000 4.50
1-1/2 13800 5.00
1-3/4 15700 6.35
2 20700 9.12
Technical Data
Load Chart for Threaded Rod - Low Carbon
Rod Coupling
Reducing Rod Coupling
See page 174
Double End Studs End
Tie Rods
Studs
Materials and Finishes
• Carbon Steel
• Plain • Zinc Plated
• Hot Dip Galvanized
• Stainless Steel
• Type 304 • Type 316
• B7 (ASTM A193)
• Coil Thread (ASTM A108)
Threaded rod in stock 6 ft / 10 ft / 12 ft lengths • Studs cut to any length
Available in Stainless
Steel and B7
Threaded Rod and Studs
Weight 3 ft 6 ft 10 ft 12 ft
per per Bundle per Bundle per Bundle per Bundle
Size CFT Pieces ft Weight Pieces ft Weight Pieces ft Weight Pieces ft Weight
6-32 3.6 100 300 10.8 100 600 21.6 N/A N/A
8-32 5.4 100 300 16.2 100 600 32.4 N/A N/A
1-/24 6.9 100 300 20.7 100 600 41.4 N/A N/A
10-32 7.4 100 300 22.2 100 600 44.4 N/A N/A
1/4 (20) 12.0 100 300 36.6 100 600 72.0 50 500 61 50 600 73.2
5/16 (18) 20.0 75 225 44.8 75 450 90.0 25 250 49.8 25 300 59.7
3/8 (16) 29.0 50 150 44.0 50 300 88.0 25 250 73.3 25 300 87.9
7/16 (14) 40.0 25 75 30.2 25 150 60.3 15 150 60.3 15 180 72.4
1/2 (13) 54.0 25 75 41.0 25 150 82.0 13 130 69.3 13 156 83.2
5/8 (11) 83.0 15 45 38.0 15 90 72.0 8 80 67.5 8 96 81
3/4 (10) 125.0 10 30 37.1 10 60 76.0 5 50 61.8 5 60 74.1
7/8 (9) 170.0 9 27 46.1 9 54 92.0 5 50 85.3 5 60 102.3
1 (8) 223.0 6 18 40.2 6 36 80.0 3 30 67 3 36 80.4
1-1/8 (7) 281.0 4 12 33.8 4 24 68.0 Bulk Bulk
1-1/4 (7) 354.0 4 12 42.5 4 24 84.0 Bulk Bulk
1-3/8 (6) 423.0 4 12 50.8 4 24 120.0 Bulk Bulk
1-1/2 (6) 512.0 4 12 61.5 4 24 122.0 Bulk Bulk
1-3/4 (2) 635.0 Bulk Bulk Bulk Bulk
2 (4-1/2) 912.0 Bulk Bulk Bulk Bulk
MADE IN THE USA
AVAILABLE
ON REQUEST
173
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADED ROD
The Slip-On Lock (R) Lock Nut has
been developed with the ability to be
positioned on threaded rod at any point,
without the time consuming nuisance of
threading. Just open the Slip-On Lock Nut
and insert where needed. Twist close and
tighten with a wrench. It’s that simple.
Federal Stock No.
Part No. Desc. Rec. Load Rec. Torque for Government
Use
25CSLNZ 1/4-20 650 6-8 5310-01-264-0918
37CSLNZ 3/8-16 2000 19-25 5310-01-268-5154
50CSLNZ 1/2-13 4000 50-60 5310-01-268-5155
62CSLNZ 5/8-11 5000 100-120 5310-01-268-5156
75CSLNZ 3/4-10 8000 180-200 5310-01-268-5157
Dia. 304 S/S Part No. 316 S/S Part No.
1/4 25C600THRS 25C600THR3
3/8 37C600THRS 37C600THR3
1/2 50C600THRS 50C600THR3
5/8 62C600THRS 62C600THR3
3/4 75C600THRS 75C600THR3
7/8 87C600THRS 87C600THR3
1 100C600THRS 100C600THR3
1-1/8 112C600THRS 112C600THR3
1-1/4 125C600THRS 125C600THR3
Larger diameters available upon request
• 6 ft Lengths
• Coarse Thread
• All sizes available in
12 ft lengths
• Sold in single pieces
Plain - Zinc Plated, H.D.G.
Plain-Black Zinc Plated Hot Dip Galv Feet/ Master
Dia. Part No. Part No. Part No. Bundle Bundle
1/4 25C600THR 25C600THRZ 25C600THRH 300 7500
3/8 37C600THR 37C600THRZ 37C600THRH 150 3750
1/2 50C600THR 50C600THRZ 50C600THRH 72 1800
5/8 62C600THR 62C600THRZ 62C600THRH 48 1200
3/4 75C600THR 75C600THRZ 75C600THRH 30 750
7/8 87C600THR 87C600THRZ 87C600THRH 24 600
1 100C600THR 100C600THRZ 100C600THRH 12 300
1-1/8 112C600THR 112C600THRZ 112C600THRH
1-1/4 125C600THR 125C600THRZ 125C600THRH
1-1/2 150C600THR 150C600THRZ 150C600THRH
1-3/4 175C600THR 175C600THRZ 175C600THRH
2 200C600THR 200C600THRZ 200C600THRH
Sold in
single units
Plain - Zinc Plated
Plain-Black Zinc Plated Feet per Master
Dia. Part No. Part No. Bundle Bundle
1/4 N/A 25C1000THRZ 500 12500
3/8 37C1000THR 37C1000THRZ 250 6250
1/2 50C1000THR 50C1000THRZ 120 3000
5/8 62C1000THR 62C1000THRZ 80 2000
3/4 75C1000THR 75C1000THRZ 50 1250
7/8 87C1000THR 87C1000THRZ 40 1000
1 100C1000THR 100C1000THRZ 20 500
1-1/8 112C1000THR 112C1000THRZ
1-1/4 125C1000THR 125C1000THRZ
1-1/2 150C1000THR 150C1000THRZ
1-3/4 175C1000THR 175C1000THRZ
2 200C1000THR 200C1000THRZ
Sold in single
units
Plain - Zinc Plated
Plain-Black Zinc Plated Feet per Master
Dia. Part No. Part No. Bundle Bundle
1/4 25C1200THRZ 300 15000
3/8 37C1200THR 37C1200THRZ 150 7500
1/2 50C1200THR 50C1200THRZ 72 3600
5/8 62C1200THR 62C1200THRZ 48 2400
3/4 75C1200THR 75C1200THRZ 30 1500
7/8 87C1200THR 87C1200THRZ 24 1200
1 100C1200THR 100C1200THRZ 12 600
1-1/8 112C1200THR 112C1200THRZ
1-1/4 125C1200THR 125C1200THRZ
1-1/2 150C1200THR 150C1200THRZ
1-3/4 175C1200THR 175C1200THRZ
Sold in single
units
Dia. Part No.
1/4 25C1200THR7
3/8 37C1200THR7
1/2 50C1200THR7
5/8 62C1200THR7
3/4 75C1200THR7
7/8 87C1200THR7
Dia. Part No.
1 100C1200THR7
1-1/8 112C1200THR7
1-1/4 125C1200THR7
1-1/2 150C1200THR7
1-3/4 175C1200THR7
2 200C1200THR7
• 12 ft Lengths
• Sold in single pieces
No need to thread nut onto rod. Simply open the nut and
insert it on the threaded rod where needed. Then twist to
close and tighten with a wrench.
Part No. SN Series Size / Rod Size Load Rating
SN25 1/4" SN Series Nut 500 lbs.
SN37 3/8" SN Series Nut 1350 lbs.
SN50 1/2" SN Series Nut 2250 lbs.
174 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROD COUPLINGS
Rod Size Length E.G.
1/2 2 50C200B7S
1/2 2-1/4 50C225B7S
1/2 2-1/2 50C250B7S
1/2 2-3/4 50C275B7S
1/2 3 50C300B7S
1/2 3-1/4 50C325B7S
1/2 3-1/2 50C350B7S
1/2 3-3/4 50C375B7S
1/2 4 50C400B7S
1/2 4-1/2 50C450B7S
1/2 5 50C500B7S
1/2 5-1/2 50C550B7S
1/2 6 50C600B7S
5/8 2 62C200B7S
5/8 2-1/4 62C225B7S
5/8 2-1/2 62C250B7S
5/8 2-3/4 62C275B7S
5/8 3 62C300B7S
5/8 3-1/4 62C325B7S
5/8 3-1/2 62C350B7S
5/8 3-3/4 62C375B7S
5/8 4 62C400B7S
5/8 4-1/2 62C450B7S
5/8 5 62C500B7S
5/8 5-1/2 62C550B7S
5/8 6 62C600B7S
5/8 7 62C700B7S
3/4 2 75C200B7S
3/4 2-1/4 75C225B7S
3/4 2-1/2 75C250B7S
3/4 2-3/4 75C275B7S
3/4 3 75C300B7S
3/4 3-1/4 75C325B7S
3/4 3-1/2 75C350B7S
3/4 3-3/4 75C375B7S
3/4 4 75C400B7S
3/4 4-1/2 75C450B7S
3/4 5 75C500B7S
3/4 5-1/2 75C550B7S
3/4 6 75C600B7S
3/4 7 75C700B7S
3/4 8 75C800B7S
3/4 9 75C900B7S
7/8 2 87C200B7S
7/8 2-1/4 87C225B7S
7/8 2-1/2 87C250B7S
7/8 2-3/4 87C275B7S
7/8 3 87C300B7S
Rod Size Length E.G.
7/8 3-1/4 87C325B7S
7/8 3-1/2 87C350B7S
7/8 3-3/4 87C375B7S
7/8 4 87C400B7S
7/8 4-1/2 87C450B7S
7/8 5 87C500B7S
7/8 5-1/2 87C550B7S
7/8 6 87C600B7S
7/8 7 87C700B7S
7/8 8 87C800B7S
7/8 9 87C900B7S
1 3 100C300B7S
1 3-1/4 100C325B7S
1 3-1/2 100C350B7S
1 3-3/4 100C375B7S
1 4 100C400B7S
1 4-1/2 100C450B7S
1 5 100C500B7S
1 5-1/2 100C550B7S
1 6 100C600B7S
1 7 100C700B7S
1 8 100C800B7S
1 9 100C900B7S
1 10 100C1000B7S
1-1/8 4 112C400B7S
1-1/8 4-1/2 112C450B7S
1-1/8 5 112C500B7S
1-1/8 5-1/2 112C550B7S
1-1/8 6 112C600B7S
1-1/8 6-1/2 112C650B7S
1-1/8 7 112C700B7S
1-1/8 7-1/2 112C750B7S
1-1/8 8 112C800B7S
1-1/8 8-1/2 112C850B7S
1-1/8 9 112C900B7S
1-1/8 9-1/2 112C950B7S
1-1/8 10 112C1000B7S
1-1/4 5 125C500B7S
1-1/4 5-1/2 125C550B7S
1-1/4 6 125C600B7S
1-1/4 6-1/2 125C650B7S
1-1/4 7 125C700B7S
1-1/4 7-1/2 125C750B7S
1-1/4 8 125C800B7S
1-1/4 8-1/2 125C850B7S
1-1/4 9 125C900B7S
1-1/4 9-1/2 125C950B7S
1-1/4 10 125C1000B7S
Hot Dip Galv. 304 Stainless Steel
Rod Size Length E.G. Part No. Part No.
1/4 7/8 25CROCZ 25CROCH 25CROCS
3/8 1-1/8 37CROCZ 37CROCH 37CROCS
1/2 1-1/4 50CROCZ 50CROCH 50CROCS
5/8 2-1/8 62CROCZ 62CROCH 62CROCS
3/4 2-1/4 75CROCZ 75CROCH 75CROCS
7/8 2-1/2 87CROCZ 87CROCH 87CROCS
1 2-3/4 100CROCZ 100CROCH 100CROCS
1-1/8 3 112CROCZ 112CROCH 112CROCS
1-1/4 3-3/4 125CROCZ 125CROCH 125CROCS
1-1/2 4 150CROCZ 150CROCH 150CROCS
1-3/4 4-1/2 175CROCZ 175CROCH 175CROCS
2 5 200CROCZ 200CROCH 200CROCS
Rod Size Length E.G.
3/8 1-3/4 37C175RCLZ/B
1/2 1-3/4 50C175RCLZ/B
5/8 2-3/4 62C275RCLZ/B
Rod Size E.G.
3/8 x 1/4 37C25RRCZ/B
3/8 x 5/16 37C31RRCZ/B
1/2 x 1/4 50C25RRCZ/B
1/2 x 5/16 50C31RRCZ/B
1/2 x 3/8 50C37RRCZ/B
5/8 x 3/8 62C37RRCZ/B
5/8 x 1/2 62C50RRCZ/B
3/4 x 5/8 75C62RRCZ/B
7/8 x 3/4 87C25RRCZ/B
1 x 7/8 100C87RRCZ/B
Size Part No. Quantity
1/4-20 25CTHH/B 100
5/16-18 31CTHH/B 100
3/8-16 37CTHH/B 100
7/16-14 43CTHH/B 100
1/2-13 50CTHH/B 50
5/8-11 62CTHH/B 25
3/4-10 75CTHH/B 20
7/8-9 87CTHH/B 15
1-8 100CTHH/B 10
1-1/8-7 112CTHH/B 10
1-1/4-7 125CTHH/B 5
Use with B-7 Studs ASTM A194-2H
In stock
(Stud Bolt)
(Measured First Thread to First Thread
Per ASTM A193 / A320) • (Standard Stock)
175
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADED STUDS
Types
Full Thread Tap End Radius End Reducing
Single End Unthreaded (Blank) Chisel Point Weld
Double End 45° Chisel Point
Materials
17-4 PH** A193 B16
303 A286** 2024T4 A320 L7
304 Alloy 20 6061T6 A354 BC
304 Strain Hard Carpenter A354 BD
304 ELC 20 CB3*** SAE GR. 8
309 Nitronic 60** 1018
310 1020
316 1117 Copper
316 Strain Hard Nickel 200 12L14 Brass
316 ELC Monel 400* 1215 Naval Brass
317 ELC Monel 405* A36 Silicon Bronze
321 K-Monel 500* Zinc Plated Aluminum Bronze
330 Inconel 600* Hot-Dip Galvanized Phosphor Bronze
347 Inconel 601* Cupro-Nickel
410 Inconel 625*
410 Heat Treated Incoloy 800H* 4140
416 Incoloy 825* 4340
430 Hastelloy A193 B7
440 C C-276**** A193 B7M
501 Heat Treated
Certification
* Trademark of International Nickel Corporation
** Trademark of Armco Inc
*** Trademark of Carpenter Technology Corporation
**** Trademark of Cabot Corporation
(Measured End to End) • (By request)
(Measured First Thread to First Thread
Per ASTM A193 / A320) • (Standard Stock)
• 304 & 316 S/S
• Plain Steel
• Electro-Galvanized
• B-7
176 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ANCHOR BOLTS / HOOK BOLTS / U-BOLTS
Anchor Bolt
(Many Sizes Stocked!)
Special
Square Bend
Round Bend
Special
Round
Square
Angle
177
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HOOK BOLTS / U-BOLTS / STUDS
Double End Studs
Tap End Studs
Studs
Sag Rods
Tie Rods
Coil Threaded Rods
Special
Closed
Open
178 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ANCHOR BOLTS / CUSTOM FABRICATION
• For use with cast in place
anchor stud assemblies
Part No. Nominal ID Square Thick
37DFIP/1/4 X 2 X 2 3/8 2 1/4
37DFIP/1/4 X 3 X 3 3/8 3 1/4
37DFIP/1/4 X 4 X 4 3/8 4 1/4
50DFIP/1/4 X 3 X 3 1/2 3 1/4
50DFIP/1/4 X 4 X 4 1/2 4 1/4
62DFIP/1/4 X 3 X 3 5/8 3 1/4
62DFIP/1/4 X 4 X 4 5/8 4 1/4
62DFIP/3/8 X 3 X 3 5/8 3 3/8
75DFIP/1/4 X 3 X 3 3/4 3 1/4
75DFIP/1/4 X 4 X 4 3/4 4 1/4
87DFIP/1/4 X 3 X 3 7/8 3 1/4
87DFIP/1/4 X 4 X 4 7/8 4 1/4
1DFIP/1/4 X 4 X 4 1 4 1/4
Series Bolt Size Shell Size Part No. Quantity
AX 1/2 2 x 5 1701 100
AX 3/4 2 x 5 1702 100
A 5/8 2 x 7 1703 100
A 3/4 2 x 7 1704 100
A 7/8 2 x 7 1705 100
B 1 3 x 10 1706 50
B 1-1/4 3 x 10 1707 50
C 1-1/2 4 x 15 1708 20
C 1-3/4 4 x 15 1709 20
D 2 4 x 18 1710 20
D 2-1/4 4 x 18 1711 20
E 2-1/2 6 x 24 1712 10
E 3 6 x 24 1713 10
F 4 6 x 24 1714 10
F 5 6 x 24 1715 10
Anchor Bolt Sleeves provide a grout
pocket around anchor bolts to allow
you to position anchor bolts exactly
where you want them.
• Quick and easy install
• Low cost • Lightweight
• Non-corrosion / Non-conductive
• Grout pockets inherently keep free
of water and dirt
• Bolts cuts its own thread in the top of the polyethylene
sleeve
• No custom pre-fitting required, no welding, forming, pipe
cutting or packing
• Order nuts and washers
separately
• Special sizes available
• Specify dimensions - material
and finish required
Part No. Diameter x Length x Leg x Thread
37C600ABO 3/8 x 6 x 1 x 2
37C800ABO 3/8 x 8 x 1 x 2
37C1000ABO 3/8 x 10 x 1 x 2
37C1200ABO 3/8 x 12 x 1 x 2
50C600ABO 1/2 x 6 x 1 x 2
50C800ABO 1/2 x 8 x 1 x 2
50C1000ABO 1/2 x 10 x 1 x 2
50C1200ABO 1/2 x 12 x 1 x 2
62C800ABO 5/8 x 8 x 2 x 4
62C1000ABO 5/8 x 10 x 2 x 4
62C1200ABO 5/8 x 12 x 2 x 4
62C1600ABO 5/8 x 16 x 2 x 4
62C1800ABO 5/8 x 18 x 2 x 4
75C1200ABO 3/4 x 12 x 3 x 4
75C1500ABO 3/4 x 15 x 3 x 4
75C1600ABO 3/4 x 16 x 3 x 4
75C1800ABO 3/4 x 18 x 3 x 4
75C2000ABO 3/4 x 20 x 3 x 4
75C2400ABO 3/4 x 24 x 3 x 4
75C3000ABO 3/4 x 30 x 3 x 4
100C1800ABO 1 x 18 x 3 x 6
100C2400ABO 1 x 24 x 3 x 6
for
• Threading • Punching • Shearing
• Bending • Milling • Power Rolling
• Welding • Drilling • Galvanizing
• Sawing • Painting • Flame Cutting
179
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Quick Reference
VERTIGO™
SAMMY SUPER SCREW
Pipe Hangers
Pipe Hangers Quick
Reference . . . . . . . 180-184
Strut Quick
Reference . . . . . . . . . . 184
Standard Hangers
Adjustable Pipe Roll Stand . . 193
Beam Clamps 188-189, 196-197
Brackets ...............207
C-Clamps ...............188
Clevis Hanger . . . . . . . 186 - 187
Clevis Hanger with
Welded Shield . . . . . . . . . . . 187
Double Rod Roller Hanger . . 190
Pipe Clamps . . . . . . . . . . . . . 198
Pipe Shields . . . . . . . . . . . . . 186
Pipe Insulation Protection
Saddles ................191
Pipe Roll Stand. . . . . . . . . . . 192
Pipe Saddle Supports 194 - 195
Retaining Straps
for Beam Clamps . . . . 188 - 189
Riser Clamps . . . . . . . . . . . . 185
Roller Chair . . . . . . . . . . . . . 191
Single Rod Roller Hanger . . . 190
V-Clevis / V-Trough . . . . . . . . 185
Weld Beam Attachment . . . . 197
Plumbing / Sprinkler Hangers
Copper Bell Hanger (Van) . . . 219
Copper Natick Hanger . . . . . 219
Emlok Sprinkler Ring . . . . . . 221
Holdrite . . . . . . . . . . . 214 - 216
Nail Plates . . . . . . . . . . . . . . 213
Split Ring Hangers . . . . . . . . 217
Sumner ................213
Hanger Hardware
Bang-ItTM / Wood-KnockerTM . . 220
Concrete Attachments . . . . . 199
Drop In Anchors . . . . . . . . . . 221
Hanger Hardware . . . . 217 - 219
Hollow Set Drop In Anchor . . 220
Metal Deck Ceiling Bolts. . . . 199
Sammy Super Screw . . 222 - 225
T-Head Bolts . . . . . . . . . . . . 243
U-Bolt .................218
Vertigo Fastening System . . . 225
Specialty Products
Caddy Speed Link. . . . . . . . . 235
Gripple Hanging System 232 - 233
Innerlynx Link Seals . . . . 210 - 211
Klo-Shure...............212
Rooftop Supports
. . . . . . . . .198 - 199, 236 - 242
Pipe Flashing / Dektite . . . . . 244
Pre-Insulated Shields /
Supports . . . . . . 200 - 201, 204
Rize Kwic-Loc . . . . . . . . . . . 234
Sleeves - Wall / Floor 209, 231
Slides / Guides / Anchors 202 - 203
Steel Sections . . . . . . . . . . . 208
Underground Clamps . . . . . . 243
Wire Hanging Systems 232 - 235
Seismic Bracing /
Vibration Isolation
Tolco Seismic . . . . . . . 226 - 229
Vibration Isolation
Products . . . . . . . 204, 207, 230
Wire Rope . . . . . . . . . . 189, 229
180 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE HANGERS QUICK REFERENCE
Steel C-Clamp
Steel C- Clamp with Locknut
Jr. Top Beam
Wide Mouth Top Beam
Adjustable Beam
Clamp
Steel Beam
Clamp
Center Load
Beam Clamp
Malleable Iron
Beam Clamp
("Ice Tong")
UFS Forged Steel
Beam Clamp
Side Beam Clamp
Retaining Strap
Retaining Strap
Adjustable
“J” Hanger
Elongated Clevis
Hanger
Flat Top Clevis
Hanger
Light Duty Clevis Hanger
Adjustable Swivel Ring
Emlok Sprinkler
(NFPA Rod Sizes)
AWWA "Cast-Iron"
Clevis Hanger
Copper Tubing
Adjustable
Swivel Ring
Vee Bottom
Clevis Hanger
A-Band
Adjustable Band
Hanger
Copper Tubing
Adjustable Band
Hanger
Plastic Pipe
Support Channel
"V-Trough"
Hinged Extension Split
Pipe Clamp
Copper Tubing Hinged
Extension Split Pipe
Clamp
Z-Purlin Beam Clamp
Standard Clevis
Hanger
Copper Tubing
Clevis Hanger
181
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE HANGERS QUICK REFERENCE
Extension Split
Pipe Clamp
Copper Tubing
Extension Split Pipe
Clamp
Offset ‘J’ Hook
Straight ‘J’ Hook
Light Duty Spring
Hanger
Spring Cushion
Hanger
Parallel Strap Hanger
Right Angle Strap
Hanger
Hanger
Standard Riser
Clamp
Copper Tubing
Riser Clamp
Two-Bolt
Underground
Clamp
Standard Pipe Clamp
Heavy Duty Pipe
Clamp
Lug Washer
Washer
"Fish Plate"
Double Bolt Pipe Clamp
Heavy Duty Double Bolt
Pipe Clamp
Marine Hanger
Offset Pipe
Clamp
"2-Hole" Short
Pipe Strap
182 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE HANGERS QUICK REFERENCE
Adjustable Steel
Yoke Pipe Roll
(Single Rod)
Pipe Rollers for
Strut
Roller Chair
Pipe Rollers for
Strut
Roller Strut
Steel Roller Stand
Adjustable Roller Stand
with Base Plate
Pipe Roll with
Sockets
(Double Rod)
Adjustable
Roller Support
Pipe Rollers for
Strut
Pipe Rollers for
Strut
Base Stand
Threaded Base
Stand
Pipe Support
Adjuster
Pipe Saddle
Support with
U-Bolt
Pipe Saddle
Support
Pipe Saddle
Support
Adjustable Pipe
Saddle Support
Adjustable Pipe
Saddle Support
with Yoke
Adjustable Pipe
Saddle Support
Pipe Alignment
Guide
Pipe Slides
Insulation
Protection Shield
360° Insulation
Protection Shield
Pipe Covering
Protection
Saddle
183
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE HANGERS QUICK REFERENCE
Adjustable Metal
Deck Ceiling Bolt
Light Duty Spot
Concrete Insert
Steel Insert Nut
Malleable Iron
Insert Nut
Malleable Iron
Concrete Insert
Spot Insert
Fastener Clip
Fastener Clip
Light Welded
Steel Bracket
Adjustable Strut
Bracket
Medium Duty Angle Bracket
Heavy Duty Angle Bracket
Light Duty
Bracket
Ceiling Flange
F & M Plate
Side Beam
Connector
Side Beam
Angle Clip
Welded Beam
Attachment
Rod Attachment
Concrete Plate
Clevis Concrete
Plate
Single Lug
Concrete Plate
184 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE HANGERS / STRUT QUICK REFERENCE
Standard U-Bolt
Light Duty U-Bolt
Eye Socket
Weldless Eye
Nut
Forged Steel
Clevis
Extension
Piece
Turnbuckle
Eye Rod
Welded Eye Rod
J-Bolt
Coach Screw
Rod
Drive Screw
Steel Rod Coupling
Steel Reducer
Rod Coupling
Malleable Iron
Rod Coupling
Steel Washer
Plate
1-5/8” x 1-3/8”
Welded Back to Back
1-5/8” x 1”
1-5/8” x 13/16”
1-5/8” x 13/16”
1-5/8” x 1-5/8”
1-5/8” x 3-1/4”
1-5/8” x 2-7/16”
1-5/8” x 1-5/8”
185
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RISER CLAMPS / V-CLEVIS
Other Finishes / Materials Available
• ZP • P • HDG • SS
Part No. Part No. Part No.
Size Black E.G. Copper
3/4 75DRIC 75DRICZ 75DRICK
1 100DRIC 100DRICZ 100DRICK
1-1/4 125DRIC 125DRICZ 125DRICK
1-1/2 150DRIC 150DRICZ 150DRICK
2 200DRIC 200DRICZ 200DRICK
2-1/2 250DRIC 250DRICZ 250DRICK
3 300DRIC 300DRICZ 300DRICK
3-1/2 350DRIC 350DRICZ 350DRICK
4 400DRIC 400DRICZ 400DRICK
5 500DRIC 500DRICZ 500DRICK
6 600DRIC 600DRICZ 600DRICK
8 800DRIC 800DRICZ 800DRICK
10 10IRIC 10DRICZ 10IRICK
12 12IRIC 12DRICZ 12IRICK
14 14IRIC 14DRICZ 14IRICK
16 16IRIC 16DRICZ 16IRICK
18 18IRIC 18DRICZ 18IRICK
20 20IRIC 20DRICZ 20IRICK
24 24IRIC 24DRICZ 24IRICK
Pipe Size Size Wt./Each Max. Rec.
Size A Stock Bolts Approx. Load, lb
1/2 9-1/8 3/16x1 3/8x1-1/2 1.01 220
3/4 9-1/4 3/16x1 3/8x1-1/2 1.06 220
1 9-5/8 3/16x1 3/8x1-1/2 1.07 220
1-1/4 9-7/8 1/4x1 3/8x1-1/2 1.12 250
1-1/2 10 1/4x1 3/8x1-1/2 1.20 250
2 10-1/2 1/4x1 3/8x1-1/2 1.25 300
2-1/2 11-1/16 1/4x1 3/8x1-1/2 1.67 400
3 11-13/16 1/4x1 3/8x1-1/2 1.81 500
3-1/2 13 1/4x1 1/2x1-1/2 2.12 600
4 13-1/2 1/4x1 1/2x1-1/2 2.22 750
5 14 1/4x1-1/2 1/2x1-3/4 3.44 1500
6 15-3/16 1/4x1-1/2 1/2x1-3/4 3.65 1600
8 19 3/8x1-1/2 5/8x2-1/2 7.24 2500
10 22 3/8x2 5/8x2-1/2 11.11 2500
12 22-1/2 1/2x2 5/8x2-1/2 15.82 2700
14 23-3/4 1/2x2 5/8x2-1/2 16.75 2700
16 27-1/2 5/8x2-1/2 3/4x3 30.34 2900
18 28-1/2 5/8x2-1/2 3/4x3 31.84 2900
20 30-1/4 5/8x2-1/2 3/4x3 34.31 2900
* Also available in stainless steel. See price list for ordering information.
Underwriters Laboratories Approved 2” - 8”.
Part No.
Pipe Size Size Rod Black
1/2-2 1 3/8 INVCH/EMP
2-1/4-4 2 1/2 2NVCH/EMP
CE
H
E F G Max. Wt.
Size Pipe A D Rod Steel Steel Recom. per
No. Size Rod Size B C Adjust. Takeout Size Size H Load/lb C
1/2 3/8 5-3/8 4-3/8 1-3/8 3-7/8 3/4x13ga 3/4x13ga 3/16 150 30
1 3/4 3/8 5-3/8 4-1/4 1-3/8 3-3/4 3/4x13ga 3/4x13ga 3/16 150 30
1 3/8 5-3/8 4-1/16 1-3/8 3-5/8 3/4x13ga 3/4x13ga 3/16 150 30
1-1/4 3/8 5-3/8 3-7/8 1-3/8 3-3/8 3/4x13ga 3/4x13ga 3/16 150 30
1 1-1/2 3/8 5-3/8 3-11/16 1-3/8 3-1/4 3/4x13ga 3/4x13ga 3/16 150 30
2 3/8 5-3/8 3-5/16 1-3/8 2-7/8 3/4x13ga 3/4x13ga 3/16 150 30
2-1/2 1/2 8-3/8 6 1-3/8 5-1/2 1/8x1-1/8 1/8x1-1/8 3/8 250 115
2 3 1/2 8-3/8 5-1/2 1-3/8 5 1/8x1-1/8 1/8x1-1/8 3/8 250 115
4 1/2 8-3/8 4-3/4 1-3/8 4-1/4 1/8x1-1/8 1/8x1-1/8 3/8 250 115
Part No.
Pipe Size Size Angle Size Black
1/2-2 1 1-1/2-1-1/2 1NVTR
2-1/4-4 2 3-3 2NVTR
C Max. Recom.
A Steel Load per Wt.
Channel No. Pipe Size Length B Thickness Length per C
1 1/2to2 8’0” 1-1/2 1/8 150 400
2 2-1/2to4 8’0” 3 18ga 250 800
186 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CLEVIS HANGERS / PIPE SHIELDS
Other Finishes / Materials Available
• EG • P • HDG • SS • PVC
Part No. Part No. Part No.
Pipe Size Rod Size Black Copper Zinc
Plated
1/2 3/8 50DCLH 50DCLHK 50DCLHZ
3/4 3/8 75DCLH 75DCLHK 75DCLHZ
1 3/8 100DCLH 100DCLHK 100DCLHZ
1-1/4 3/8 125DCLH 125DCLHK 125DCLHZ
1-1/2 3/8 150DCLH 150DCLHK 150DCLHZ
2 3/8 200DCLH 200DCLHK 200DCLHZ
2-1/2 1/2 250DCLH 250DCLHK 250DCLHZ
3 1/2 300DCLH 300DCLHK 300DCLHZ
3-1/2 1/2 350DCLH 350DCLHK 350DCLHZ
4 5/8 400DCLH 400DCLHK 400DCLHZ
5 5/8 500DCLH 500DCLHK 500DCLHZ
6 3/4 600DCLH 600DCLHK 600DCLHZ
7 3/4 700DCLH 700DCLHK 700DCLHZ
8 3/4 800DCLH 800DCLHK 800DCLHZ
10 7/8 10ICLH 10ICLHK 10ICLHZ
12 7/8 12ICLH 12ICLHK 12ICLHZ
14 1 14ICLH 14ICLHK 14ICLHZ
16 1 16ICLH 16ICLHK 16ICLHZ
18 1 18ICLH 18ICLHK 18ICLHZ
20 1-1/4 20ICLH 20ICLHK 20ICLHZ
24 1-1/4 24ICLH 24ICLHK 24ICLHZ
30 1-1/4 30ICLH 30ICLHK 30ICLHZ
Part No. Part No.
Hanger Size 10” Long 12” Long
1-1/2 150DPSH 150DPSH/12
2 200DPSH 200DPSH/12
2-1/2 250DPSH 250DPSH/12
3 300DPSH 300DPSH/12
3-1/2 350DPSH 350DPSH/12
4 400DPSH 400DPSH/12
5 500DPSH 500DPSH/12
6 600DPSH 600DPSH/12
8 800DPSH 800DPSH/12
10 10IPSH 10IPSH/12
12 12IPSH 12IPSH/12
14 14IPSH 14IPSH/12
16 16IPSH/12
18 18IPSH/12
20
24
30
Call
for
proper sizing
Note: All shields are pre-galvanized carbon steel.
Order shields to match hanger size to be used.
Pipe Size of Steel Wt. Max. Rec.
Size Upper Lower A B C D E F per 100 Load lb*
1/2 16gax7/8 16gax7/8 3/8 1-11/16 2-1/8 2-1/2 7/8 7/16 30 610
3/4 16gax7/8 16gax7/8 3/8 1-7/8 2-7/16 2-1/2 1 1/2 32 610
1 16gax7/8 16gax7/8 3/8 2-1/8 2-13/16 2-1/2 1-1/4 5/8 36 610
1-1/4 16gax7/8 16gax7/8 3/8 2-9/16 3-7/16 2-1/2 1-3/4 7/8 42 610
1-1/2 13gax7/8 13gax7/8 3/8 3 4 2-1/2 2-1/8 1-1/16 55 610
2 13gax7/8 13gax7/8 3/8 3-11/16 4-7/8 2-1/2 2-15/16 1-5/8 60 610
2-1/2 10gax1-3/16 11gax1-3/16 1/2 4-11/16 6-1/8 3 3-13/16 2 115 1130
3 10gax1-3/16 11gax1-3/16 1/2 4-3/4 6-9/16 3 3-7/8 1-3/4 132 1130
3-1/2 9gax1-3/16 11gax1-3/16 1/2 4-15/16 6-15/16 3 4-1/16 1-3/4 156 1130
4 9gax1-3/16 11gax1-3/16 5/8 5-9/16 7-13/16 3-1/2 4-1/2 1-15/16 190 1430
5 4gax1-1/4 8gax1-1/4 5/8 6-3/16 9 3-1/2 5-1/8 1-3/4 240 1430
6 3gax1-1/2 8gax1-1/2 3/4 6-13/16 10-1/8 4 5-5/8 1-7/8 320 1940
9 3gax1-3/4 8gax1-3/4 3/4 8-1/2 12-1/8 4-1/4 6-1/2 2-1/4 450 2000
8 3gax1-3/4 8gax1-3/4 7/8 8-5/16 12-5/8 4-1/4 7 2-1/8 500 2000
10 3/8x1-3/4 3gax1-3/4 7/8 9-7/8 15-1/4 4-1/2 8-3/8 2-1/4 860 3600
12 3/8x2 3gax2 7/8 11-3/16 17-9/16 4-3/4 9-3/4 2-5/8 1040 3800
14 1/2x2-1/2 3gax21/2 1 12-7/16 19-7/16 5-1/4 10-13/16 2-15/16 1280 4200
16 1/2x2-1/2 3gax2-1/2 1 15 23 6 12-7/16 2-5/8 1960 4600
18 1/2x2-1/2 3gax2-1/2 1-1/8 15-1/4 24-1/4 6-1/2 13-15/16 3-3/4 2420 4800
20 5/8x3 3/8x3 1-1/4 16-3/4 26-3/4 7 13-15/16 4 4225 4800
24 5/8x3 3/8x3 1-1/4 19 31 7-1/2 17-1/2 4-1/4 4600 4800
30 3/4x3 3/8x3 1-1/4 24-1/8 39-1/8 8-1/4 21-7/8 5 6950 6000
B = Black
EG = Electro
Galvanized
or Zinc Plated
P = Painted
HDG = Hot Dip
Galvanized
PVC = P.V.C. Coated
K = Copper
SS = Stainless Steel
187
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Sizes available 3” thru 24”
• B • P • E.G • HDG • SS
CLEVIS HANGERS / CLEVIS HANGERS WITH SHIELD
Hanger Shield Part No. Part No.
Size (in) Black Zinc Plated
1-1/2 10 150DCWS 150DCWSZ
2 10 200DCWS 200DCWSZ
2-1/2 10 250DCWS 250DCWSZ
3 10 300DCWS 300DCWSZ
3-1/2 10 350DCWS 350DCWSZ
4 10 400DCWS 400DCWSZ
5 10 500DCWS 500DCWSZ
6 10 600DCWS 600DCWSZ
8 10 800DCWS 800DCWSZ
10 10 10ICWS 10ICWSZ
12 10 12ICWS 12ICWSZ
14 10 14ICWS 14ICWSZ
16 10 16ICWS 16ICWSZ
18 10 18ICWS 18ICWSZ
Other Finishes / Materials Available
• P • HDG
Sizes available 1/4” thru 12”
• B • P • E.G. • HDG • SS
Other Finishes / Materials Available
• EG • P • HDG • SS • PVC
Part No. Part No.
Pipe Size Rod Size Black E.G.
3/4 3/8 75DCLH/X 750CLHZ
1 3/8 100DCLH/X 100CLHZ
1-1/4 3/8 125DCLH/X 125CLHZ
1-1/2 3/8 150DCLH/X 150CLHZ
2 3/8 200DCLH/X 200CLHZ
2-1/2 1/2 250DCLH/X 250CLHZ
3 1/2 300DCLH/X 300CLHZ
3-1/2 1/2 350DCLH/X 350CLHZ
4 1/2 400DCLH/X 400CLHZ
Other Finishes / Materials Available
• EG • P • HDG
Part No. Part No.
Size Black Copper
3/4 75DABH 75DABHK
1 100DABH 100DABHK
1-1/4 125DABH 125DABHK
1-1/2 150DABH 150DABHK
2 200DABH 200DABHK
2-1/2 250DABH 250DABHK
3 300DABH 300DABHK
3-1/2 350DABH 350DABHK
4 400DABH 400DABHK
5 500DABH 500DABHK
6 600DABH 600DABHK
Other Finishes / Materials Available
• P • HDG
Hanger Shield Part No. Part No.
Size (in) Black Zinc Plated
1-1/2 12 150DCWS/12L 150DCWSZ/12L
2 12 200DCWS/12L 200DCWSZ/12L
2-1/2 12 250DCWS/12L 250DCWSZ/12L
3 12 300DCWS/12L 300DCWSZ/12L
3-1/2 12 350DCWS/12L 350DCWSZ/12L
4 12 400DCWS/12L 400DCWSZ/12L
5 12 500DCWS/12L 500DCWSZ/12L
6 12 600DCWS/12L 600DCWSZ/12L
8 12 800DCWS/12L 800DCWSZ/12L
10 12 10ICWS/12L 10ICWSZ/12L
12 12 12ICWS/12L 12ICWSZ/12L
14 12 14ICWS/12L 14ICWSZ/12L
16 12 16ICWS/12L 16ICWSZ/12L
18 12 18ICWS/12L 18ICWSZ/12L
188 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BEAM CLAMPS / C-CLAMPS
Available in sizes 3/8 - 1/2 - 5/8 - 3/4
Part No. Part No.
Size Black EG
3/8 37CJTB 37CJTBZ
1/2 50CJTB 50CJTBZ
5/8 62CJTB 62CJTBZ
3/4 75CJTB 75CJTBZ
7/8 87CJTB 87CJTBZ
Rod Size Maximum Wt. (Approx.)
Size A Pipe Recommended Load (lb) per 100
3/8 4 350 30
1/2 4 470 39
5/8 5 550 40
3/4 6 700 67
7/8 8 1000 66
Underwriters laboratories approved 3/8”, 1/2”
Part No. Part No.
Size Black EG
3/8 37CWMT 37CWMTZ
1/2 50CWMT 50CWMTZ
5/8 62CWMT 62CWMTZ
3/4 75CWMT 75CWMTZ
Rod Pipe Max. Recommended Wt. (Approx.)
Size A Size Load (lb) per 100
3/8 1/2to2 400 38
1/2 2-1/2to3-1/2 500 49
5/8 4and5 800 66
3/4 6 900 83
Underwriters laboratories approved 3/8”, 1/2”
D
CF
B
D
F
B
Part No. Part No.
Size Black EG
3/8 37CCCL 37CCCLZ
1/2 50CCCL 50CCCLZ
5/8 62CCCL 62CCCLZ
3/4 75CCCL 75CCCLZ
7/8 87CCCL 87CCCLZ
Also available in Stainless Steel
Installed with Figure. 21-R, Factory Mutual Approved.
Size Max. Rec. Max. Pipe Wt. (Approx.)
(B) Load (lb) Size C D F per 100
3/8 400 4 2-3/8 2-3/8 3/4 39
1/2 500 4 5-3/8 2-5/16 3/4 40
5/8 550 5 2-3/8 2-5/16 3/4 64
3/4 630 6 2-3/8 2-1/4 3/4 70
7/8 1200 8 2-3/4 2-5/8 3/4 149
C
Part No. Part No.
Size Black EG
3/8 37CCLN 37CCLNZ
1/2 50CCLN 50CCLNZ
5/8 62CCLN 62CCLNZ
3/4 75CCLN 75CCLNZ
7/8 87CCLN 87CCLNZ
• 2 types, See next page for details
189
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BEAM CLAMPS / RETAINING STRAPS
Part No. Part No.
Size Black EG
ForSteelC-Clamps CRS CRSZ
ForMalleableBeamClamps JRS JRSZ
RetrofitRetainingStrap No.300R
3/8 Rod Size
Note: 7/8” max flange thickness
Size Max. Load No.
1/4 150
3/8 350
1/2 400 Standard Finish - Black E.G.
Finish Available
BC200 - For 1/4” Threaded Rod
BC400 - For 3/8” Threaded Rod
Material:Steel
Standard Finish:PlainorElectro-Plated
Service:Designedforusewithvarioustypesofbeamclamps.
Ordering:Specifytype,rodsize,andlength‘L’,(add2”[50.8]minimumtoflange
width),andfinish.
Dimensions
Part No. Rod Size ‘A’ Hole Size ‘B’ L (Length)
69 3/8 1-1/4 7/16 Specify
69 1/2 1-1/4 9/16 Specify
69 5/8 1-1/4 11/16 Specify
69 3/4 1-1/4 13/16 Specify
Material:Steel
Standard Finish:PlainorElectro-Plated
Ordering:Specifypartnumber,rodsize,andlength‘L’,(add1”[25.4]minimumto
flangewidth),andfinish.
Dimensions
Part No. Rod Size L (Length)
69R 3/8 Specify
69R 1/2 Specify
Load
Part Set Rating Weight 100
No. Thickness Screw per lb Pcs.
PS907 1/4 3/8 450 26
PS998 3/8 1/2 900 64
Dia. Construction Part No.
1/8 7 x 7 12DWIRH/7 x 7
3/16 7 x 19 8DWIRH/7 x 19
1/4 7 x 19 25DWIRH/7 x 19
Dia. Part No.
11/8 12DMWRH
3/16 18DMWRH
1/4 25DMWRH
Dia. Part No.
1/8 12DWRTH
3/16 18DWRTH
1/4 25DWRTH
Part No.
PS63345EG
190 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROLLER HANGERS
Finishes Available
• E.G. • PVC • HDG
Part No. Part No.
Pipe Size Black Painted
2 200DSRR 200DSRRP
2-1/2 250DSRR 250DSRRP
3 300DSRR 300DSRRP
3-1/2 350DSRR 350DSRRP
4 400DSRR 400DSRRP
5 500DSRR 500DSRRP
6 600DSRR 600DSRRP
8 800DSRR 800DSRRP
10 10ISRR 10ISRRP
12 12ISRR 12ISRRP
14 14ISRR 14ISRRP
16 16ISRR 16ISRRP
18 18ISRR 18ISRRP
20 20ISRR 20ISRRP
24 24ISRR 24ISRRP
Material: Cast iron roll; carbon steel yoke and cross bolt.
Finish: Black; electro-galvanized or painted to order.
Service: For suspension of pipe from single support rod where
horizontal movement may occur because of expansion
or contraction.
Ordering: Specify pipe size, figure number and finish.
Finishes Available
• E.G. • PVC • HDG
Part No. Part No.
Pipe Size Black Painted
2 200DDRR 200DDRRP
2-1/2 250DDRR 250DDRRP
3 300DDRR 300DDRRP
3-1/2 350DDRR 350DDRRP
4 400DDRR 400DDRRP
5 500DDRR 500DDRRP
6 600DDRR 600DDRRP
8 800DDRR 800DDRRP
10 10IDRR 10IDRRP
12 12IDRR 12IDRRP
14 14IDRR 14IDRRP
16 16IDRR 16IDRRP
18 18IDRR 18IDRRP
20 20IDRR 20IDRRP
24 24IDRR 24IDRRP
30 30IDRR 30IDRRP
Material: Cast iron socket and roller; carbon steel cross rod.
Finish: Black; electro-galvanized or painted to order.
Service: For suspension of pipe where longitudinal movement
due to expansion and contraction may occur.
Ordering: Specify pipe size, figure number and finish.
Pipe Max. Rec.
Size A B C D E** F L Load, lb
2 1/2 4 1-5/8 2-5/8 3 4-1/4 6-1/2 480
2-1/2 1/2 3-7/8 2 3-3/8 2-3/4 4-3/4 6-5/8 530
3 1/2 4-3/8 2-1/4 3-3/4 3-3/8 5-1/2 7-1/4 560
3-1/2 1/2 4-5/8 2-1/2 4-1/4 3-5/8 6 8 600
4 5/8 4-3/4 2-3/4 4-7/8 3-3/4 6-1/2 8-1/2 600
5 5/8 5-7/8 3-3/8 5-7/8 4-1/4 8 9-7/8 600
6 3/4 5-7/8 4 7 4-1/4 9 11-3/8 860
7 3/4 6-1/2 4-5/8 8 5 10 12 860
8 7/8 7-1/4 5-1/8 9 5-1/2 12 13-1/4 1080
10 7/8 9 6-3/8 11 6-7/8 14-1/417 1385
12 7/8 9-5/8 7-3/8 13 7-7/8 17 18-7/8 1920
14 1 11-1/4 8-3/8 14-1/4 9-1/4 18-1/221-7/8 2505
16 1 12-1/4 9-3/8 16-1/4 10-1/4 20 24-1/8 3180
18 1 13-1/4 10-1/2 18-1/4 11-1/4 22 26-1/2 3360
20 1 14-1/4 11-5/8 20-1/4 12-1/4 24 28-1/8 3640
** Rod Take-Out
Rollers Are Available In:
H.D.G. - with Zinc Plated Hardware • SS - Yoke and Hardware with H.D.G. Roller
Pipe Max. Rec.
Size A B C E** L Load, lb
1 3/8 1-1/16 3 2-5/8 4-1/8 600
1-1/4 3/8 1-1/4 3-3/8 2-13/16 4-1/2 600
1-1/2 3/8 1-3/8 3-5/8 2-15/16 4-3/4 600
2 3/8 1-5/8 4-1/8 3-3/16 5-1/4 600
2-1/2 1/2 1-15/16 4-7/8 3-5/8 6-1/4 660
3 1/2 2-1/4 5-1/2 3-15/16 6-7/8 700
3-1/2 1/2 2-9/16 6-1/8 4-5/16 7-1/2 750
4 5/8 2-13/16 6-3/4 4-13/16 8-1/4 750
5 5/8 3-7/16 8-1/16 5-9/16 9-11/16 750
6 3/4 4 9-9/16 6-1/2 11-7/16 1070
7 3/4 4-11/16 10-3/4 6-13/16 12-1/2 1100
8 7/8 5-1/8 11-15/16 8 14-1/16 1350
10 7/8 6-3/8 14-1/16 9-1/4 16-3/16 1730
12 7/8 7-7/16 16-5/16 10-7/16 17-15/16 2400
14 1 8-3/8 17-3/4 12-1/8 20-1/8 3130
16 1 9-7/16 20-3/4 12-15/16 22-1/8 3970
18 1 10-1/2 21-7/8 14-1/4 24-1/2 4200
20 1-1/4 11-5/8 24-1/4 15-3/4 27-1/4 4550
24 1-1/2 14 28-5/8 18-3/4 32-1/8 6160
30 1-1/2 17-7/16 35-1/2 22-7/8 39 7290
** Rod Take-Out.
191
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SADDLES / ROLLER CHAIR
Heavy gauge steel - tack welded to pipe
• Pipe Size 3/4” - 24”
• Insulation Thickness 1” - 4”
• Finish: Black - Painted - EG - HDG
* Use in Conjunction with Roller Hangers
Size range: 2” through 30” pipe
Material: Cast iron roll, steel chair, roll rod, bolts and hex nuts
Finish: Plain or galvanized
Maximum temperature: 450°F at roller
Service: For support of pipe where longitudinal movement due
to expansion and contraction may occur, but where no vertical
adjustment is required.
Approvals: Complies with Federal Specification A-A-1192A (Type
44) WW-H-171-E (Type 45) and MSS-SP-69 (Type 44).
Installation: Two bolts and nuts provide anchorage to floor or top
of steel beam or bracket or chair may be welded to supporting
steel.
How to size:
(1) If roll is to support bare pipe, select the size directly from
nominal pipe size (see below).
(2) If used with pipe covering protection saddle, see page PH-108
for size of pipe roll.
(3) If roll is to support covered pipe, the O.D. of the covering
should not be greater than the O.D. of the pipe for which the
roll was designed.
Ordering: Specify size of roll, figure number, name and finish. Be
certain to order oversized rolls when insulation and protection
saddles are required.
Finishes Available
• E.G. • PVC • HDG
Part No. Part No.
Pipe Size Black Painted
2-1/2 250DRCH 250DRCHP
3 300DRCH 300DRCHP
3-1/2 350DRCH 350DRCHP
4 400DRCH 400DRCHP
5 500DRCH 500DRCHP
6 600DRCH 600DRCHP
8 800DRCH 800DRCHP
10 10IRCH 10IRCHP
12 12IRCH 12IRCHP
14 14IRCH 14IRCHP
16 16IRCH 16IRCHP
18 18IRCH 18IRCHP
20 20IRCH 20IRCHP
24 24IRCH 24IRCHP
30 30IRCH 30IRCHP
Max Weight Dimensions (in)
Pipe Size Load (lb) (lb) W B C F H
2 600 1.1 4 1-1/4 1-1/2 3/8x1-1/2 1-5/8
2-1/2 660 1.4 4-7/8 1-1/4 1-5/8 3/8x1-1/2 1-15/16
3 700 1.6 5-3/8 2 1-3/4 3/8x1-1/2 2-1/4
3-1/2 750 2.6 6-1/8 2 2-1/16 3/8x1-1/2 2-9/16
4 750 2.9 6-5/8 2 2-5/16 1/2x1-1/2 2-13/16
5 750 3.7 7-7/8 3 2-1/2 1/2x1-1/2 3-7/16
6 1,070 5.9 9-1/4 3-1/8 2-3/4 1/2x1-1/2 4
8 1,350 9.0 11-5/8 3-3/8 3 5/8x1-1-1/2 5-1/8
10 1,730 13.8 14-1/8 5-1/4 3-5/8 5/8x2 6-3/8
12 2,400 18.9 16-1/8 5-1/2 4-1/8 5/8x2 7-7/16
14 3,130 28.07 18-3/4 6-1/2 4-11/16 3/4x2 8-3/8
16 3,970 34.93 21 8-1/4 5-3/8 3/4x2-1/2 9-3/8
18 4,200 44.35 23-1/8 9-1/4 6 3/4x2-1/2 10-7/16
20 4,550 56.34 24-5/8 10-1/4 6-1/2 3/4x1-1/2 11-5/8
24 6,160 87.52 29-3/8 12-1/4 7-7/8 7/8x3-1/2 14
30 7,290 151.25 34-13/16 15-3/8 8-3/4 7/8x3-1/2 17-7/16
192 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE ROLL STAND
Size Range: 2” through 42”
Material: Cast iron roll and stand
Finish: • Plain or • Galvanized
Service: For support of pipe where longitudinal movement due to expansion and
contraction may occur but where no vertical adjustment is required.
Maximum temperature: 450°F at roller.
Approvals: Complies with Federal Specification A-A-1192A (Type 44)
WW-H-171-E (Type 45) and MSS-SP-69 (Type 44).
Installation:
(1) Two cored holes for anchorage bolts are provided on all sizes for fastening stands to welded steel
brackets, structural supports, piers, floors, etc.
(2) In addition, cored holes “N” at the four corners of the stand are provided for anchorage purposes.
(3) The two cored holes on sizes 2” to 6” are on outside of stand (see dotted lines and dimension J’).
(4) On all other sides, the holes are inside of uprights (see dimension J).
How to size:
• If roll is to support bare pipe, select size directly from nominal pipe size (see below).
• If used with pipe covering protection saddle, see
page PH-131 for size of pipe roll.
Ordering: Specify pipe roll size, figure number, name
and finish. Be certain to order oversized rolls when
insulation and protection saddle are required.
Note: Standard line of carbon steel base plates
available.
DI/CI Fig. 271
Pipe Size Roller Size
3 4
4 5
6 6
8 8
10 10
12 14
14 16
16 18
18 20
20 24
24 30
30 N/A
Pipe Max
Size Load Weight H B D D’ E F G J J’ L M N R T U
2 390 6.4 3-1/2 1-3/8 - 8-3/8 5-3/8 2-3/4 1-7/8 - 6-3/8 9/16 11/16 1/2 4 3-7/16 4
2-1/2 390 6.4 3-7/8 2-1/8 - 8-3/8 5-3/8 2-3/4 1-7/8 - 6-3/8 9/16 11/16 1/2 4 3-7/16 4
3 390 6.4 4-1/8 2-3/8 - 8-3/8 5-3/8 2-3/4 1-7/8 - 6-3/8 9/16 11/16 1/2 4 3-7/16 4
3-1/2 390 6.4 4-3/8 2-5/8 8-3/8 5-3/8 2-3/4 1-7/8 - 6-3/8 9/16 11/16 1/2 4 3-7/16 4
4 950 8.9 4-13/16 2-3/4 - 9-7/8 5-5/8 3-3/4 2-1/16 - 7-7/8 3/4 7/8 1/2 5-3/8 4-11/16 4-1/4
5 950 8.9 5-7/16 3-3/8 - 9-7/8 5-5/8 3-3/4 2-1/16 - 7-7/8 3/4 7/8 1/2 5-3/8 4-11/16 4-1/4
6 950 8.9 6-1/16 4 - 9-7/8 5-5/8 3-3/4 2-1/16 - 7-7/8 3/4 7/8 1/2 5-3/8 4-11/16 4-1/4
8 2,100 15.3 8-11/16 6-1/4 8-5/8 - 6-5/8 6 3-1/4 4 - 3/4 7/8 5/8 7-3/4 7 5
10 2,100 15.3 9-13/16 6-3/8 8-5/8 - 6-5/8 6 3-1/4 4 - 3/4 7/8 5/8 7-3/4 7 5
12 3,075 28.1 11-5/8 7-1/2 10-15/16 - 7-7/8 8 4 5-3/4 - 3/4 7/8 3/4 9-7/8 9-1/16 6
14 3,075 28.1 12 8-1/8 10-15/16 - 7-7/8 8 4 5-3/4 - 3/4 7/8 3/4 9-7/8 9-1/16 6
16 4,980 39.7 13-5/8 9-3/8 12-3/8 - 8-5/8 9 4-1/2 6-3/4 - 7/8 1 13/16 11-1/4 10-1/4 6-1/2
18 4,980 39.7 14-5/8 10-3/8 12-3/8 - 8-5/8 9 4-1/2 6-3/4 - 7/8 1 13/16 11-1/4 10-1/4 6-1/2
20 4,980 39.7 15-5/8 11-3/8 12-3/8 - 8-5/8 9 4-1/2 6-3/4 - 7/8 1 13/16 11-1/4 10-1/4 6-1/2
24 6,100 49.6 17-3/4 13-3/8 13-1/2 - 8-5/8 10 4-7/16 7-1/2 - 1 1-1/8 13/16 12-1/2 11-3/8 6-1/2
30 7,500 99.3 21-7/8 16-3/4 17 - 10-3/4 12-1/2 5-1/2 10 - 1-1/4 1-1/2 1-1/16 15-3/4 14-1/4 8
36 12,000 152.0 25-3/4 20 20 - 12 15 6-3/8 12 - 1-1/2 1-3/4 1-5/16 18-3/4 17 9
42 12,000 152.0 28-7/8 20-1/8 20 - 12 15 6-3/8 12 - 1-1/2 1-3/4 1-5/16 18-3/4 17 9
193
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE ROLL STAND
Size Range: 2” through 42”
Material: Cast iron base plate, stand roll;
steel adjusting screws
Finish: • Plain or • Galvanized
Service: For support of pipe lines where
longitudinal movement due to expansion
and contraction may occur and where
vertical and lateral adjustment during
installation may be required.
Maximum Temperature: 450°F at roller
Approvals: Complies with Federal Specification A-A-1192A (Type 46)
WW-H-171-E (Type 47) and MSS-SP-69 (Type 46).
Installation: Base plate is provided with two holes for anchorage to floor, pier, structural
support and similar constructions, as well as to welded steel brackets Fig. 195 page PH-66 and Fig. 199,
page PH-67. Adjustable pipe roll stand without base plate, Fig. 275, can be used for supporting tunnel
piping, etc., by resting ends of adjusting screws on structural steel angles, channels, etc.
Adjustment: Vertical adjustment is obtained by use of the four adjusting screws located on corners of
stand. Lateral adjustment is secured by stand sliding on each of adjusting screws.
How to size:
• If roll is to support bare pipe, select the size directly from nominal pipe size (see below).
• If used with pipe covering protection saddle, see page PH-131 for size of pipe roll.
Ordering: Specify pipe roll size, figure number, name and finish. For further dimensions of stand, see
Fig. 271, page PH-142. Be certain to order oversized rolls when insulation and protection saddles are
required.
Note: Standard line of carbon steel base plates available.
DI/CI Fig. 274
Pipe Size Roller Size
3 4
4 5
6 6
8 8
10 10
12 14
14 16
16 18
18 20
20 24
24 30
30 N/A
Pipe Max Weight H’ H’ V
Size Load Fig. 274 Fig. 275 Fig. 274P Min Max E W K Max M P R S
2 390 15.2 7.8 15.3 5-1/8 5-3/8 5-1/2 6-7/8 1 7/8 1 3/4 1 5/8
2-1/2 390 15.2 7.8 15.3 5-3/8 5-5/8 5-1/2 6-7/8 1 7/8 1 3/4 1 5/8
3 390 15.2 7.8 15.3 5-3/4 6 5-1/2 6-7/8 1 7/8 1 3/4 1 5/8
3-1/2 390 15.2 7.8 15.3 6 6-1/4 5-1/2 6-7/8 1 7/8 1 3/4 1 5/8
4 950 19.3 10.3 19.3 6-1/2 7 5-3/4 8-1/8 1 1-1/8 1 3/4 1 5/8
5 950 19.3 10.3 19.3 7 7-1/2 5-3/4 8-1/8 1 1-1/8 1 3/4 1 5/8
6 950 19.3 10.3 19.3 8-1/8 8-1/8 5-3/4 8-1/8 1 1-1/8 1 3/4 1 5/8
8 2,100 32.1 18.1 32.1 10-3/8 11-5/8 6-3/4 10-5/8 1 1-3/4 1-1/8 13/18 1 3/4
10 2,100 32.1 18.1 32.1 11-1/2 12-3/4 6-3/4 10-5/8 1 1-3/4 1-1/8 13/18 1 3/4
12 3,075 51.2 32.1 51.2 13 14-1/4 8 13 1 1-3/4 1-1/8 3/4 1 7/8
14 3,075 51.2 32.1 51.2 13-5/8 14-7/8 8 13 1 1-3/4 1-1/8 3/4 1 7/8
16 4,980 71.3 45.3 71.3 15-1/4 16-5/8 8-5/8 14-5/8 1 1-7/8 1-1/4 7/8 1-3/16 1
18 4,980 71.3 45.3 71.3 16-3/8 17-3/4 8-5/8 14-5/8 1 1-7/8 1-1/4 7/8 1-3/16 1
20 4,980 71.3 45.3 71.3 17-3/8 18-3/4 8-5/8 14-5/8 1 1-7/8 1-1/4 7/8 1-3/16 1
24 6,100 87.0 55.0 87.0 19-5/8 21 8-5/8 15-3/4 1 1-7/8 1-3/8 1 1-3/16 1
30 7,500 166.2 109.2 166.2 24 26-3/4 10-1/2 19-1/4 1 3-1/4 1-5/8 1-1/4 1-3/8 1-1/4
36 12,000 304.0 176.0 304.0 28-3/8 31-3/4 11 23 1-1/8 4-1/2 2 1-1/2 2-1/4 1-1/2
42 12,000 304.0 176.0 304.0 31-1/2 34-7/8 11 23 1-1/8 4-1/2 2 1-1/2 2-1/4 1-1/2
194 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE SADDLE SUPPORTS
Pipe Size R B
3 2.03” 3/8”x2
4 2.45” 3/8”x2
6 3.50” 1/2”x2
8 4.58” 1/2”x2
10 5.60” 1/2”x2
12 6.65” 1/2”x2
Kits come complete with:
• 1-1/4” x 8” straight tapped nipple
• 3” long cast steel 1-1/4” x 2” reducing coupling
• (2) 3/8” x 1/2” stainless steel set screws
• 8” x 8” steel base plate
• 10 step installation guide
• All components are Hot Dipped Galvanized
• Provides up to 4-1/2” adjustment
• Field cut 2” schedule 40 HDG pipe to length
• Sized for both IPS and ductile iron pipe
• Ductile iron saddle with threaded coupling(428KT)
OR
• Ductile iron saddle and U-Bolt with threaded coupling (429KT)
195
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE ROLL STAND
• Adjustable made with Threaded
Rod
• Specify Pipe Size 2” thru 12”
• Adjustable made with Threaded
Rod
• Specify Pipe Size 2” thru 12”
Specify Pipe Size 2” thru 36”
Size Range: 2-1/2 through 36 inch pipe
Material: Cast iron saddle, locknut nipple
and special cast iron reducer
- assembled -
Rod Size
Pipe Size A C E G Weight
2 5/8 2-11/16 9-7/16 1/4x1 1.2
2-1/2 5/8 3-5/16 9-11/16 1/4x1 1.4
3 5/8 3-15/16 10 1/4x1 1.6
3-1/2 5/8 4-7/16 10-1/4 1/4x1 2.6
4 7/8 5-1/4 10-1/2 1/4x1-1/4 3.0
5 7/8 6-1/8 11 1/4x1-1/4 3.2
6 1 7-1/4 11-11/16 3/8x1-1/2 4.9
8 1 9-3/8 12-11/16 3/8x1-1/2 6.2
10 1-1/4 11-1/2 13-7/8 1/2x2 10.5
12 1-1/4 13-1/2 14-7/8 12X2 11.8
Rod Size
Pipe Size A E G Weight
2 5/8 9-7/16 1/4x1 1.0
2-1/2 5/8 9-11/16 1/4x1 1.4
3 5/8 10 1/4x1 1.6
3-1/2 5/8 10-1/4 1/4x1 2.6
4 7/8 10-1/2 1/4x1-1/4 3.0
5 7/8 11 1/4x1-1/4 3.2
6 1 11-11/16 3/8x1-1/2 4.9
8 1 12-11/16 3/8x1-1/2 6.2
10 1-1/4 13-7/8 1/2x2 10.5
12 1-1/4 14-7/8 1/2x2 11.8
196 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CENTER LOAD BEAM CLAMPS
Specify clamp size, flange width, figure
number and finish.
Clamp Max. Rec.
Size Stock Size A B C Load (lb)
1 1/4x1-1/4 3/8 4 3 550
2 1/4x1-1/2 1/2 4 3 850
3 3/8x1-1/2 5/8 4-1/2 3-1/4 1100
4 3/8x2 3/4 4-1/2 3-1/4 1500
5 1/2x2 7/8 5 3-1/2 2600
6 1/2x2-1/2 1 5 3-1/2 4300
Malleable Iron use with Grinnell No.157
Max Rod Take-Out, Weight Max.
Rod For Width of Beam Flange (Approx.) Rec.
Size A 2-3/8 3 4 5 6 7 per 100 Load, lb
3/8 4-3/4 4-11/16 4-9/16 4-3/16 3-13/16 3-1/8 242 610
1/2 4-7/8 4-13/16 4-11/16 4-5/16 3-15/16 3-1/4 263 1130
5/8 4-15/16 4-7/8 4-3/4 4-3/8 4 3-5/16 267 1365
3/4 4-3/16 5-1/8 5 4-5/8 4-1/4 3-9/16 287 1365
7/8 5-1/4 5-3/16 5-1/16 4-11/16 4-5/16 3-5/8 301 1365
Rod sizes - 3/8 thru 7/8
Rod Size Load (lb)
3/8 700
1/2 1130
5/8 1365
3/4 1365
7/8 1365
Flange Size
Flange Max. Flange Weight (lb)
Width Thickness Fig. 133 Std. Duty Fig. 134 Heavy Duty
4 1/2 .091 3.82
5 5/8 1.00 4.35
6 3/4 1.15 4.52
7 7/8 1.29 4.84
8 7/8 1.44 5.10
9 1 - 5.83
10 1 - 6.25
11 1 - 6.67
12 1 - 7.09
TYPE Rod Size Max Load (lb)
1 3/8 300
2 1/2 500
3 5/8 700
SPECIFYFLANGEWIDTHWHENORDERING
Bolts Spacer Max
Part No. C B Size O.D. Load
Fig.133 1/2 1-3/8 3/8 1-1/16 1,000
Fig.134 3/4 2-1/4 5/8 1-1/16 3,000
Note:
• Forged Steel • 3/8 - 2 1/2 Rod Size
Also Available Black • E.G
197
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HEAVY-DUTY BEAM CLAMPS / WELD BEAM ATTACHMENT
* Furnished with links
Part No.
Size Black
3/8 37DWBA
1/2 50DWBA
5/8 62DWBA
3/4 75DWBA
7/8 87DWBA
1 100DWBA
1-1/4 125DWBA
1-1/2 150DWBA
1-3/4 175DWBA
2 200DWBA
Order Nut and Bolt
separately if required
◆◆◆◆◆
Other Finishes available
• E.G
• PVC
• HDG
Material: Clamps are made of steel, weldless eye nuts of forged
steel to ASTM-A 235 Class C.
Clamp Max Max
Size Rod Size A Load Z B
1 5/8 2,160 0.60 1-1/16
2 7/8 4,480 0.60 1-3/8
3* 7/8 4,480 0.60 1-3/8
4 1-1/2 11,500 1.031 2-3/8
5* 1-1/2 11,500 1.031 2-3/8
Clamp Max Rod Max Z
Size No. Size A Load Max B
1 3/4 3,320 0.60 1-1/4
2 1 5,900 0.60 1-11/16
3* 1 5,900 0.60 1-11/16
4 1 5,900 1.031 1-1/2
5* 1 5,900 1.031 1-1/2
6 1-1/2 11,500 1.031 2-1/8
7* 1-1/2 11,500 1.031 2-1/8
8 2 11,500 1.031 4-9/16
* Furnished with links
Flange Size Load Max. Weight
Size Width Thickness in lb Rod Size Each
1 3-8 5/8 2,800 3/4 8#
2* 7-12 5/8 2,800 3/4 12#
3 3-8 3/4 5,000 1 11#
4* 7-15 3/4 5,000 1 16#
5 5-11 1 11,500 1-1/2 30#
6* 8-16 1 11,500 1-1/2 48#
198 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE CLAMPS / PIPE PIER®
Pipe Max. Part No.
Size Load (lb) Black
1/2 850 50DDBP
3/4 850 75DDBP
1 850 100DDBP
1-1/4 850 125DDBP
1-1/2 1380 150DDBP
2 1380 200DDBP
2-1/2 1380 250DDBP
3 1380 300DDBP
3-1/2 1805 350DDBP
4 2230 400DDBP
5 2230 500DDBP
Pipe Max. Part No.
Size Load (lb) Black
6 2555 600DDBP
8 2555 800DDBP
10 2890 10IDDBP
12 2890 12IDDBP
14 3835 14IDDBP
16 3835 16IDDBP
18 3835 18IDDBP
20 4900 20IDDBP
24 4015 24IDDBP
30 4015 30IDDBP
Note: Sizes 6 - 36” Pipe
Finishes available
• B • E.G. • HDG • SS
B = Black
EG = Electro Galvanized or Zinc Plated
P = Painted
HDG = Hot Dip Galvanized
PVC = P.V.C. Coated
K = Copper
S = Stainless Steel
Note: Sizes 1/2 - 30” Pipe Finishes
available
• B • E.G. • HDG • SS
Note: Sizes 3 - 24” Pipe Finishes
available
• B • E.G. • HDG • SS
Note: Sizes 3/4 - 10” Pipe
Finishes available
• B • E.G. • HDG • SS
Note: Sizes 3/4 - 8” Pipe
Finishes available
• B • E.G. • HDG • SS
For applications with larger
loads
For air handling space
installations
Description Load Weight
UPC No. Part Pipe Pier Capacity Quantity per Each Figure
782856 No. (strut finish) per Block per Bundle lb No.
41921 PP50H4 10-1/2”Lx4”Wx4”H(PG) 50 10 1.2 1
41920 PP50H6 10-1/2”Lx4”Wx6”H(PG) 50 10 1.5 1
44514 PP150H4 12”Lx12”Wx4”H(PG) 150 3 3.9 2
44516 PP300H4 21-1/2”Lx12”Wx4”H(PG) 300 3 9.0 2
45146 PP50H2AH 10-1/2”Lx4”Wx2”H(CG) 50 10 0.9 3
PG=Pre-galvanized CG=YellowDichromate
199
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CONCRETE ATTACHMENTS / METAL DECK CEILING BOLTS
Steel Max. Malleable Max.
Size Insert Nut Load (lb) Insert Nut Load (lb)
1/4 25CCIN 240
3/8 37CCIN 610 37CCINM 610
1/2 50CCIN 1130 50CCINM 1130
5/8 62CCIN 1200 62CCINM 1140
3/4 75CCIN 1200 75CCINM 1140
7/8 87CCIN 1200 87CCINM 1140
Steel Box - Part #OUBCIB
Malleable Iron - #OUCIBM
Order insert nuts separately
Finishes • B • E.G.
1-5/8” x 1-3/8”
Size No. A Stock T
1 3/8 1-1/4x1/8 1
2 1/2 1-1/2x1/8 1-1/4
3 5/8 1-1/2x3/16 1-1/2
4 3/4 1-1/2x1/4 1-3/4
5 7/8 1x1/4 2
6 1 2x1/4 2-1/4
RS Rod Size Plate Size
3/8 3/8x8 1-1/4x10
1/2 1/2x8 1-1/4x10
5/8 5/8x8 1-1/4x10
3/4 3/4x12 2x5
7/8 7/8x12 3x8
See
Pages
238-241
for
ordering
info
PYRAMID 25
PYRAMID 300 PYRAMID 600 COLUMN SUPPORTS
CADDY® Pyramid Pipe &
Equipment Supports
∙Dramatically reduces installation time by
replacing labor-intensive methods for sup-
porting pipes, conduits and equipment.
∙Support multiple runs of pipe and conduit
on roofs and below raised floors
∙Supports concentrated loads of up to
600 lbs.
∙Absorbs shock and vibration.
CADDY® Pyramid 50
∙Supports up to 50 lb. loads.
∙Electro-galvanized (EG) finish pro-
vides superior corrosion protection.
∙Polyethylene closed-cell foam & 16-ga.
steel construction.
∙Metal top designed to shed water
and minimize water collection on
foam.
∙Absorbs shock and vibration.
∙Protects roof membrane.
∙The 4” high model has a 10 3⁄8” x 4”
footprint.
∙The 6” high model has a 10 3⁄8” x 4
3⁄4” footprint.
#50
200 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PRE-INSULATED PIPE SUPPORTS
Pre-insulated pipe supports from Pipe Shields, Inc. have
become standards in commercial, industrial, petrochemical
and power construction markets.
These pre-insulated pipe supports best meet the market’s
basic and essential pipe support considerations because
they:
Simplify installation
• One trip installation
• One-trade responsibility
• Used as installation devices
• Eliminate welding to the pipe
• Easy location adjustment after install
• Pipe support design and qualification
• Pipe stress flexibility and seismic
analysis
• Computerized design and drafting
(AutoCAD)
• Seismic evaluation of auxiliary steel
supports and anchorage
• Chilled water
• Hot water
• All other insulated lines
• Risers • Cryogenic • Any type slide pads
• Heat traced applications
• Slides, guides and anchors
• High temperature • High temperature gasses
• Low temperature liquids • High pressure steam
• High density structural insulation calcium silicate
and urethane
• Pipe insulation fits directly to support
Pipe Primary Installed On Max Load
Size Application Flat Clevis Pipe (lb) for
Model Range Hot Cold Surface Hanger Roll 24” Pipe
A1000 1/2-24 x x x 2,300
A2000 1/2-24 x x x 2,300
A3000 1/2-24 x x x 2,400
A3000 1/2-4 x x N/A
A4000 1/2-24 x x x 2,400
A4000 1/2-4 x x N/A
A5000 2-1/2-42 x x x 1,400
A6000 2-1/2-42 x x x 1,400
A7000 2-1/2-42 x x x 2,300
A7200 6-42 x x x 4,100
A7400 10-30 x x x 5,500
A8000 2-1/2-42 x x x 2,050
A8200 6-42 x x x 3,675
A8400 10-30 x x x 4,950
Full Line Available -
Call for technical
information and
product details
201
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PRE-INSULATED PIPE SUPPORTS
Pipe Travel (Inches) +/- Lateral Max. Load (lb)
Model Range Axial Lateral Guide for 24” Pipe
B1000 3-42 1-1/2 1/2 No 3,600
B1100 3-42 1-1/2 1/2 No 7,200
B1200 3-42 1-1/2 1/2 No 10,800
B1300 12-42 1-1/2 1/2 No 14,400
B2000 3-42 4-1/2 1/2 No 3,600
B2100 3-42 4-1/2 1/2 No 7,200
B2200 3-42 4-1/2 1/2 No 10,800
B2300 12-42 4-1/2 1/2 No 14,400
B3000 3-42 1-1/2 0 Yes 3,600
B3100 3-42 1-1/2 0 Yes 7,200
B3200 3-42 1-1/2 0 Yes 10,800
B3300 12-42 1-1/2 0 Yes 14,400
B4000 3-42 4-1/2 0 Yes 3,600
B4100 3-42 4-1/2 0 Yes 7,200
B4200 3-42 4-1/2 0 Yes 10,800
B4300 12-42 4-1/2 0 Yes 14,400
B5000 3-42 1-1/2 1-1/2-4-1/2 No 3,600
B5100 3-42 1-1/2 1-1/2-4-1/2 No 7,200
B5200 3-42 1-1/2 1-1/2-4-1/2 No 10,800
B5300 12-42 1-1/2 1-1/2-4-1/2 No 14,400
B6000 3-42 4-1/2 1-1/2-4-1/2 No 3,600
B6100 3-42 4-1/2 1-1/2-4-1/2 No 7,200
B6200 3-42 4-1/2 1-1/2-4-1/2 No 10,800
B6300 12-42 4-1/2 1-1/2-4-1/2 No 14,400
B7000 3-42 1-1/2 0 WithSlidepads 3,600
B7100 3-42 1-1/2 0 WithSlidepads 6,450
B7200 3-42 1-1/2 0 WithSlidepads 9,700
B7300 12-42 1-1/2 0 WithSlidepads 12,900
B8000 3-42 4-1/2 0 WithSlidepads 3,600
B8100 3-42 4-1/2 0 WithSlidepads 6,450
B8200 3-42 4-1/2 0 WithSlidepads 9,700
B8300 12-42 4-1/2 0 WithSlidepads 12,900
202 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE SLIDES
Type 1
Type 1
Type 1
Types 1-6
With 212 Clamps
Type 2
Type 2
Type 2
Types 1-6
With 432 Clamp
Type 3
Type 3
Type 3
Types 1-6
With Endplates
Type 4
Type 4
Type 4
Types 1-6
With 212 Clamp
and Endplates
Type 5
Type 5
Type 5
Type 6
Type 6
Types 1-6
With 212 Clamps
Types 1-6
With Endplates
Types 1-5
With 212 Clamps
Types 1-6
With 212 Clamp and
Endplates
Types 1-5
With 432 Clamp
Types 1-6
With 432 Clamp
203
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SLIDES / GUIDES / ANCHORS
With Endplates
and 212 Clamps
With 212 Clamps
With 432 CWAP
With 212 Clamps
With 432 Clamps
With 212 Clamps
With 432 Clamps
With Endplates
With Endplates
With Endplates and
212 Clamps
Guide Size Selection Chart
Insulation Thickness
Pipe Size 1” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4”
1/2” 1 1 2 3 4 4 5
3/4 1 2 3 4 4 5 5
1” 1 2 3 4 4 5 5
1-1/4” 1 2 3 4 4 5 5
1-1/2” 2 2 3 4 4 5 5
2” 2 3 4 4 5 5 6
21/2” 3 3 4 4 5 5 6
3” 3 4 4 5 5 6 6
4” 4 4 5 6 6 6 7
5” 5 5 5 6 6 7 8
6” 5 5 6 6 7 8 8
8” 6 6 7 8 8 9 9
10” 8 8 8 9 9 10 10
12” 9 9 9 10 10 11 12
14” 10 10 10 10 11 11 12
16” 11 11 11 11 12 12 13
18” 12 12 12 12 13 13 14
20” 13 13 13 13 14 14 14
24” 14 14 14 14
204 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
THERMAL HANGER SHIELDS / SPRING HANGERS
Model A5000 is designed for use on:
• Hot Water • Steam • Cold Water • Chilled Water
• Gas • Vacuum • Dual Temperature • Air
Intended for installation on:
• Flat Surfaces
• Pipe Rolls
Temperature Range: - 20°F to + 1200°F
T1365-P01 8308001.021
8406001.013 8511001.014
• A5000 Applicable PSI specification document: No. 205. • Glue: Industrial contact cement. Minimum peel strength 23 lb/inch width.
• Jackets: Galvanized Steel ASTMA A-527. • Load Distribution Plate. Carbon Steel ASTM A-36.
• Insulation: Calcium silicate - 100 psi average compressive strength. Asbestos-free, treated with water repellent. k=0.38 BTU-in (hr
ft2°F)
• Primer Coating: Inorganic zinc to ANSI N101.21972 and ANSI N5. 12-1974. Corrosion resistant, abrasion resistant, 750°F
temperature resistant.
205
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
• Design and Locate
• Fabricate and Supply
• Take Offs
• Detailed Submittals
• Stamped Engineering P.E. Drawings and Details
• Engineer and Design per Plans and Specifications • P.E. Stamped Documents and Drawings
• Fabricate and Supply • Supports Located on Drawings
• Detailed Submittals • Pipe Stress Analysis (if required)
• Field Walk-Through & Verification
206 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Full Line of
Stainless Steel Hangers
AVAILABLE
207
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STEEL BRACKETS & VIBRATION ISOLATION PRODUCTS
Maximum Recommended Load: 1,500 lb
Through
Hole Hole
HLW
Counterbore
Hole
Friction
Pad On
Top
Bracket Wt. (Approx.)
No. (lb) Each A B C D
0 17.4 12 18 15-1/2 1-1/4
1 27.3 8 24 21-1/2 1-1/4
2 47.7 24 30 27-1/2 1-1/4
Bracket
No. E F G H J L
0 2-1/2 4 1-1/2 1-1/2 1/4 13/16
1 2-1/2 5 1-3/4 1-3/4 3/16 13/16
2 2-1/2 5 2 2 1/4 13/16
Maximum Recommended Load: 750 lb
Bracket Wt. (Approx.)
No. (lb) Each A B C D
1 3.1 9 8 6-1/2 5/16
2 7.7 13 12 10-1/2 5/16
3 12.8 19 18 16-1/2 3/8
Bracket
No. F G H J K L
0 4 1-1/2 2 1/4 – 13/16
1 5 2 2 3/8 2-3/4 15/16
2 5 2 2-1/2 5/16 2-1/2 1-1/16
3 5 2 2-1/2 5/16 2-1/2 1-1/16
4 6 2-1/2 3-1/2 3/8 3-1/2 1-1/16
5 6 2-1/2 3-1/2 3/8 3-1/2 1-1/16
Maximum Recommended Load: 3,000 lb
Bracket Wt. (Approx.)
No. (lb) Each A B C D E
0 24.3 12 18 15-1/4 1-3/8 2-3/4
1 51.8 18 24 21-3/8 1-7/16 2-3/4
2 65.8 24 30 27-1/2 1-1/2 2-3/4
3 82.1 30 36 33-1/4 1-5/8 3
4 140.5 36 42 39 1-1/2 3
5 166.4 42 50 46 1-1/2 3-1/2
See page 230 for
Vibration Isolation Ordering
HD
208 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STEEL SECTIONS W-BEAMS
Note:
Other Sizes Available Call For Information
Finishes: Black And Prime Painted
Finish: • Black • Painted • E.G • H.D.G
To Order Specify: Figure 45 Channel Assembly,
(Channel Size), Rod Size, (C To C)
E = C To C + 2L + W
Standard Sizes x 20 ft
Nom Depth
in Inches x Wt. / ft / lb
W4 x 13.0
W5 x 16.0
W6 x 19.0
W8 x 10.0
W10 x 12.0
W12 x 14.0
W14 x 22.0
W16 x 26.
W18 x 35.0
Standard Sizes x 20 ft
Nom Depth
in Inches x Wt. / ft / lb
W21 x 44.0
W26 x 55.0
W27 x 84.0
W30 x 99.0
W33 x 118.0
W36 x 135.0
Materials: • Steel • Aluminum
Sizes Standard 4 x 8 ft
Thickness 1/8” - 3/16” - 1/4”
Finish: • B • P • E.G • H.D.G
ASTMA A-26
Standard Sizes x 20 ft Steel - Black
11/2x11/2x1/4 150D150ANI/1/4x20
2x2x1/4 200D200ANI/1/4x20
3x3x1/4 300D300ANI/1/4x20
3x3x3/8 300D300ANI/3/8x20
4x4x3/8 400D400ANI/3/8x20
Finish: • B • P • E.G • H.D.G
Note: Other Sizes Available Call For Information
Finishes: Black And Prime Painted
Standard Sizes x 29 ft ASTMA - 36
Depth x Wt/ft/lb Steel - Black
3” x 4.1 300D2000CHI
4” x 5.4 400D2000CHI
5” x 6.7 500D2000CHI
6” x 8.2 600D2000CHI
8” x 8.5 800D2000CHI
• Threading
• Bending
• Welding
• Sawing
• Shearing
• Flame Cutting
• Punching
• Milling
• Drilling
• Painting
• Galvanizing
209
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Sheet Metal Sleeves
Schedule 40 Steel Sleeves
Material: Schedule 40 Steel pipe
Finish: Black, Galvanized or Painted
Service Application: Pipe Sleeves are cut from standard
weight pipe and furnished with welding nailing lugs when
specified
Ordering: Specify nominal pipe size A, length, finish and if
welded nailing lugs are required
Straight Pipe Sleeve
Material: Schedule 40 Steel pipe
Finish: Black, Galvanized or Painted
Service Application: Waterstop sleeves are produced
from standard weight pipe and come with a continuously
welded water stop of 3/16 steel plate
Ordering: Specify nominal pipe diameter, dimensions A,
length and finish
Round Waterstop Sleeves
Material: Galvanized, sheet metal
Sizes: Split sleeves are furnished in all diameters and lengths
Ordering: Specify length, diameter, with or w/o nail tabs
Split Sleeve
(No Tabs)
Material: Galvanized, sheet metal
Sizes: Nailing sleeves are furnished in all diameters
and lengths and (with a sheet metal protective lid if
required)
Ordering: Specify diameter, length and whether cover is
required
Nailing Sleeve (Solid)
Special Note:
1) Specify Round or Square
2) “Stops” will be 2” unless specified
Square Waterstop
Sleeves
Top
Diameter Taper Height Part No.
Hole-Outs
1-1/2” 1 8” 150DHOO
2” 1 8” 200DHOO
3” 3 8” 300DHOO
4” 3 8” 400DHOO
5” 3 8” 500DHOO
6” 3 8” 600DHOO
8” 3 8” 800DHOO
Plastic
Pipe Sleeve
Hole-Outs
Material: Galvanized, sheet metal
Service Application: Deck sleeves are furnished in all
diameters and lengths
Ordering: Specify length, diameter, size of flange, and
flange location
Q Deck Sleeve
Note:
Flange is tack welded, not
watertight
Caddy® Pipe Sleeve Positioner
• Requires only a hammer to install
• Will accommodate Schedule #40, #80 and
smaller wall thickness
• Provides secure positioning of pipe sleeve for
concrete pouring of wall and floor forms
Part No. Fig No. Sleeve Diameter Wall Thickness
740 1 All Diameter 5/16” and under
740 1 2”-6” Schedule #40 Pipe
4H58 2 6” Schedule #80 Pipe
4H58 2 8”-10” Schedule #40 Pipe
4H912 2 9”-14” Schedule #80 Pipe
Optional Lugs
Split Sleeve
(w / Nail Tabs)
SLEEVES
NEW Plastic Sleeves!
See Page 244
210 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LINK SEAL / INNERLYNX®
Innerlynx® Installation Instructions
Standard Innerlynx® Models and Properties
Innerlynx® is
shipped as
a belt of 10
interconnected
rubber links.
See next
page for
sizing
chart
Center the pipe, cable or
conduit in wall opening or
casing. Make sure the pipe
will be adequately supported
on both ends. The Innerlynx
is not intended to support
the weight of the pipe.
Connect both ends of the
belt assembly
around the pipe.
Check to be sure all bolt
heads are facing the in-
staller. Extra slack or sag
is normal. Do not remove
links. Note: On smaller
diameter pipe links may
need to be stretched.
With a hand tool, pre-
tighten the belt assembly
by giving each bolt about
2 turns.
Slide belt assembly into
annular space.
Start at 12 o’clock and tight-
en bolt until rubber begins to
“bulge.” Do not tighten any
bolt more than 4 turns at a
time. Continue in a clockwise
manner until links have been
uniformly compressed.
(Approx. 2 or 3 rotations)
Make 2 or 3 more passes
at 3 turns per
bolt, tightening all bolts
clockwise.
Installation Complete
123 4
5 6 7 8
211
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LINK SEALS / INNERLYNX®
Innerlynx Sizing & Ordering Information
Specify:
1. Pipe outside diameter
2. Wall sleeve or core drill inside diameter
3. Model of Innerlynx
4. Specify steel or stainless steel hardware
5. Wall thickness
IN STOCK for
IMMEDIATE
DELIVERY!
See Page 244 for
the NEW
Infinity®
HDPE (Plastic)
Wall Sleeves
212 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Strut-mounted Klo-Shure
Coupling supplied with two
clamp halves,
fastener, and locknut.
Klo-Shure Couplings
currently support tub-
ing from 1/4” to 4-1/8”
diameter.
Klo-Shure Couplings
currently can be used to
secure insulation from
3/8” to 1” thick.
Klo-Shure Couplings are pre-scored
and can be opened for placement
around tubing.
Standard Klo-Shure
coupling for use with
clevis hangers.
• Installs in seconds!
• One piece design
• Supports tubing and secures insulation
• Eliminates insulation compression
• No metal clamps
• Superior vapor barrier
• Improved finish - no tape, no glue
• Meets the 25/50 flame spread / smoke
developed index
8 Series
New Klo-Shure 8
Series, Our clampless
insulation coupling
Accomodates elasto-
meric and fiberglass
tubing insulation up
to 1” thick
P/N Tube Description
1/2" Insulation O.D.
824050 1/2" 1/2" x 1/2"
824062 5/8" 5/8" x 1/2"
824087 7/8" 7/8" x 1/2"
824112 1-1/8" 1-1/8" x 1/2"
824137 1-3/7" 1-3/8" x 1/2"
824162 1-5/8" 1-5/8" x 1/2"
824212 2-1/8" 2-1/8" x 1/2"
3/4" Insulation
826062 5/8" 5/8" x 3/4"
826087 7/8" 7/8" x 3/4"
826112 1-1/8" 1-1/8" x 3/4"
826137 1-3/7" 1-3/8" x 3/4"
1" Insulation
828087 7/8" 7/8" x 1"
828112 1-1/8" 1-1/8" x 1"
828137 1-3/7" 1-3/8" x 1"
828162 1-5/8" 1-5/8" x 1"
828212 2-1/8" 2-1/8" x 1"
8 Series
Ideal for securing tubing
insulation at strut-
mounted clamps
7 Series
• 7 series clamps come
complete with strap and
insert (2 pieces)
• Sized for O.D. tubing
1/4" - 4-1/8"
• Insulation wall thickness
3/8" - 1/2" - 3/4" - 1"
2 Piece
Klo-Shure System
KLO-SHURE
213
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
NAIL PLATES / SUMNER / PLUMBING
• Pre-packaged to reduce expensive
hunting time
• Controls expansion and contraction
• Improves quality and productivity
• Noise dampening
• Electrolytic isolation
The Sumner System
All 3 types of supports come in two different
materials:
Standard Yellow Polystyrene (A-500 Series)
Optional Orange ABS (A-600 Series)
All supports supplied in carton quantities of 50 units.
Similar to the Posifix, the Pipefix
can be used in lavatory or sink
rough-ins. The Pipefix application
also is similar to the Posifix in
that it holes and aligns 1/2” and
3/4”’ supply lines with pipes,
particularly in tight application.
One 7” Quik-Lok stainless steel
band, two 1/2” - 3/4” clamps and
attaching screws.
A 503 - Yellow Polystyrene
50 units/ctn
Pipefix
One 7” Quik-Lok stainless steel band,
three 1-1/2 “ clamps, attaching screws
and P-556 clips.
A 502 - Yellow Polystyrene
50 units/ctn
Stakfix
The Stakfix is used strictly inside of the chase
and attaches to 1-3/8” 6-5/8” pipe vents or
stacks by means of a stainless steel band
similar to the Pipefix.
The Stakfix has three mounting surface for
supporting a combination of piping up to 1-1/2”
running vertically and/or horizontally.
Two 1.2” - 3/4” clamps, one 1” -
1/2” clamp, and attaching screws.
A 501 - Yellow Polystyrene
50 units/ctn
Posifix
The posifix is the smallest support
particularly designed to fit between
studs. Its application is to align and
support hot and cold lines with waste
piping in a lavatory or sink rough-in.
The Posifix is pre-slotted to hold 1/2”
or 3/4” supply pipe 4” 6” or 8” apart.
The unit mounts on 1” through 1-1/2”
waste pipe for perfect alignment.
Stud Guard
Materials: Pre-
galvanized low carbon
steel
Ordering: Specify size
and figure number
Size Std. Pkg. Wt./Each per CWT
18 ga x 3 x 1-1/2 100 6.5
18 ga x 5 x 1-1/2 100 10.0
18 ga x 6 x 1-1/2 100 13.0
For wood only.
Fig. 240
Materials: Pre-galvanized low
carbon steel
Ordering: Specify size and figure
number
Size Std. Pkg. Wt./Each per CWT
18 ga x 3 x 1-1/2 200 6.0
18 ga x 5 x 1-1/2 200 9.0
18 ga x 6 x 1-1/2 200 11.0
For metal or wood
- screw to steel or
wood stud.
Nail Plate Fig. 241 Boca Safety Plate
Part Size Wgt
Number Gauge (W x L) Style Each
242G 16 5 x 8 Regular (Holes) 0.70
242GSN 16 5 x 8 Self Nailing 0.70
Material: Carbon Steel
Finish: Pre-galvanized
Fig. 242G, 242GSN
214 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HOLDRITE® / PLUMBING
Multi-purpose galvanized steel bracket supports various
application solutions
Model # Size For Pipe Size(s) Box Qty
SB1 10” to 18” Various 50
SB2 13” to 25” Various 50
HOLDRITE STOUT BRACKET – #SB1, #SB2
• Multi-purpose galvanized steel bracket supports various
application solutions
• Includes 4 screws
Model # Size For Pipe Size(s) Box Qty
SB1S 10” to 18” Various 50
SB2S 13” to 25” Various 50
HOLDRITE STOUT BRACKET – #SB1S, #SB2S
• Multi-purpose galvanized steel bracket supports various
application solutions
• Includes (2) two HOLDRITE #250 clamps and 4 screws
Model # Size For Pipe Size(s) Box Qty
SB1-2502 10” to 18” 1/2” - 1” CTS 25
SB2-2502 13” to 25” 1/2” - 1” CTS 25
HOLDRITE STOUT BRACKET – #SB1-2502
#SB2-2502
• Ideal for lavatory, sink, and water closet stub-out support
• Galvanized steel bracket provides proper pipe positioning
and alignment
• Use in conjunction with #604 amd #605 glueable inserts
Model # Bracket Size For Pipe Size(s) Box Qty
601-20 20” 1/2”, 3/4” CTS 50
601-26 26” 1/2”, 3/4” CTS 50
LOCKRITE - #601-20, #601-26
215
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HOLDRITE® PLUMBING
• Integration with the LOCKRITE #600 se-
ries brackets
• Inserts are lockable and glueable
• Inserts are grooved, creating a stronger glue joint
Model # Hole Needed For Pipe Size(s) Box Qty
604 1” Diameter 1/2” CTS 100
605 1” Diameter 3/4” CTS 100
LOCKRITE - #604, #605
• Ideal for securing single Copper, PEX, CPVC
tubing to STOUT BRACKET
• Nylon clamps attach with a single fastener
• Flame rated per UL-94-V2
Model # Size For Pipe Size(s) Box Qty
201 2-1/8” x 1-7/8” 1/2” CTS 50
202 2-1/8” x 2-7/8” 3/4” CTS 50
HOLDRITE PRO CLAMP - #201, #202
Model # Size For Pipe Size(s) Box Qty
221 1-7/8” x 1-1/2” 1/2” CTS 100
222 1-7/8” x 1-3/4” 3/4” CTS 100
223 2-3/8” x 2-1/8” 1” CTS 50
224 2-7/8” x 2-3/8” 1-1/4” CTS 25
225 2-7/8” x 2-3/4” 1-1/2” CTS 25
226 3-3/8” x 3-1/8” 2” CTS 25
• Ideal for Copper, PEX, and CPVC tubing
• Mounts directly on HOLDRITE STOUT BRACKET or other surfaces
HOLDRITE SUSPENSION CLAMPS - #221 - #226
Model # Size For Pipe Size(s) Box Qty
231 2-7/8” 1/2” CTS 100
232 2-3/8” x 2-1/8” 3/4” CTS 100
233 2-3/4” x 2-1/2” 1” CTS 50
234 2-3/4” x 1-3/4” 1-1/4” CTS 25
235 3-1/8” x 2 1-1/2” CTS 25
236 3-1/2” x 2-1/2” 2” CTS 25
• Ideal for Copper, PEX, and CPVC tubing
• Mounts directly on HOLDRITE STOUT BRACKET or other surfaces
HOLDRITE STANDARD CLAMPS - #231 - #236
Model # Hole Needed For Pipe Size(s) Box Qty
414 1-3/8” Diameter 1/2” CTS 50
415 1-3/8” Diameter 3/4” CTS 50
416 1-3/8” Diameter 1” CTS 25
• Ideal for thru-stud applications in metal framing (1-3/8” or 1-11/32”)
• Positioning & dissimilar metal isolation for Copper, PEX, and CPVC tubing
• Finger tabs allow for adjusting to off center punched holes in metal framing
HOLDRITE ISOLATORS - #414 - #416
Model # Size Box Qty Pallet Qty
40-SWHP 21-1/4” x 2-1/2”, Up to 20 gal / 375 lbs 1 10
50-SWHP 26-1/2” x 2-1/2”, Up to 50 gal / 600 lbs 1 10
• Suspended water heater platform with built in drain pan and 1” PVC drain
fitting
• Attaches to 3/8” or ½” all-thread rods
• Supports up to 50 gallon water heater or similar equipment (600 lbs.)
• Comes with cross braces for seismic requirements
HOLDRITE QUICK STAND - # 40-SWHP, #50-SWHP
216 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Holdrite® plumbing
Model # Size For Pipe Size(s) Box Qty
101-18 20” 1/2” CTS 50
101-26 26” 1/2” CTS 50
• Ideal for multiple applications including lavatory and water
closet
• Holes on 2” centers support ½” copper tubing
• Copper-bonded, heavy-gage steel bracket
HOLDRITE #101-18, #101-26
Model # Size For Pipe Size(s) Box Qty
101-18-R 20” 1/2” CTS 25
101-26-R 26” 1/2”, 3/4” CTS 25
• Ideal for lavatory and water closet
• Extruded holes provide additional soldering surface
• Ideal for copper bullets requiring a more rigid installation
• Copper-bonded, steel bracket
• 5/8” holes on 2” centers (#101-26-R also has two 7/8” holes
on 8” centers)
HOLDRITE #101-18-R, #101-26-R
Model # Size For Pipe Size(s) Box Qty
102-18 20” 3/4”, 1” CTS 50
102-26 26” 3/4”, 1” CTS 50
• Ideal for water heater and relief line applications
• Copper-bonded, heavy-gage steel bracket
• Alternating 7/8” and 1-1/8” holes on 4” centers
HOLDRITE #102-18, #102-26
Model # Size For Pipe Size(s) Box Qty
107-18 20” 1/2”, 3/4”, 1” CTS 50
107-26 26” 1/2”, 3/4”, 1”, 1-1/4” CTS 50
• Ideal for multiple application such as lavatory, water closet and
water heater
• Copper-bonded, heavy-gage steel bracket
• Holes on 2” centers for ½” tubing and holes on 4” centers for ¾”
& 1” tubing
• #107-26 also has two holes for 1-1/4” tubing on 8” centers
HOLDRITE #107-18, #107-26
Model # Size For Pipe Size(s) Box Qty
114-C 23-1/4” x 2-1/2” 1” CTS 6
114-CO 23-1/4” x 2-1/2” 1” CTS 6
114-CR 23-1/4” x 2-1/2” 1” CTS 6
• For 1” flush valve support on wall hung toilet carriers
• Copper-bonded, heavy-gage steel brackets mount directly to
4-bolt toilet carrier and position flush valve at height of 11-1/2”
above toilet
• Allows for rough-in prior to framing being erected
• 4-1/2” offset center line rough-in with #114-C and #114-CR
• #114-CO provides 4-3/4” off set rough-in (right or left hand)
• #114-CR allows for support of pre-capped stub out
HOLDRITE #114-C, #114-CO, #114-CR
114-C
114-CO
114-CR
217
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Part No. Part No.
Rod Size Black E.G.
3/8 37CHFPZ 180
1/2 50CHFPZ 180
Part No. Part No.
Pipe Size E.G. Copper
3/8 37DHSRZ 37DHSRK
1/2 50DHSRZ 50DHSRK
3/4 75DHSRZ 75DHSRK
1 100DHSRZ 100DHSRK
1-1/4 125DHSRZ 125DHSRK
1-1/2 150DHSRZ 150DHSRK
2 200DHSRZ 200DHSRK
2-1/2 250DHSRZ 250DHSRK
3 300DHSRZ 300DHSRK
4 400DHSRZ 400DHSRK
Part No.
Rod Size Rod Size
1/4x2 3/8x3
1/4x2-1/2 3/8x3-1/2
1/4x3 3/8x4
1/4x3-1/2 3/8x6
1/4x4 3/8x8
5/16x2-1/2 1/2x4
5/16x3 1/2x6
5/16x3-1/2 1/2x8
Part No. Part No.
Rod Size Black E.G.
3/8 37CSBC 300
1/2 50CSBC 560
Part No.
Rod Size Black
12x1-1/2 12N150DRS
Part No. Hole Max. Load
Rod Size Black Size (lb)
3/8 37DRAB 7/16 300
1/2 50DRAB 9/16 560
5/8 62DRAB 11/16 900
3/4 75DRAB 13/16 900
1/4 Thick 3 x 3
1/4 Thick 4 x 4
Other Sizes available on request
Part No. Max Load
Rod Size Black (lb)
1 1NRLA 180
2 2NRLA 180
3 3NRLA 340
4 4NRLA 340
Part Nom. Pipe Size
No. IP CT
454001 1/4” 3/8”
454002 3/8” 1/2”
454003 - 5/8”
454004 1/2” 3/4”
454005 3/4” 1
454006 1” 1-1/4”
454007 1-1/4” 1-1/2”
454008 1-1/2” -
454009 - 2”
Part Nom. Pipe Size
No. IP CT
454010 2” -
454011 - 2-1/2”
454012 2-1/2” -
454013 - 3”
454014 3 -
454015 - 3-1/2”
454016 3-1/2” 4”
454017 4” -
• Size Range: 1/4” through 4”
Electro-zinc plated
• Has a fire rating DIN EN 13501-1:E
• Conforms with (MSS) SP-58 and
SP-69 (Type 12)
• CAN BE USED ON COPPER
TUBING
plumbing / Hangers
218 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
copper natick & van Hangers / Hardware attacHments
PLUMBING / HANGERS
Standard U-Bolts
Pipe Rod Max Load Part No.
Size Size (lb) E.G.
1/2 1/4 435 50DUBOZ
3/4 1/4 435 75DUBOZ
1 1/4 435 100DUBOZ
1 1/4 3/8 1090 125DUBOZ
1 1/2 3/8 1090 150DUBOZ
2 3/8 1090 200DUBOZ
2 1/2 3/8 1090 250DUBOZ
3 1/2 2020 300DUBOZ
3 1/2 1/2 2020 350DUBOZ
4 1/2 2020 400DUBOZ
5 1/2 2020 500DUBOZ
6 5/8 3230 600DUBOZ
8 5/8 3230 800DUBOZ
10 3/4 4830 10IUBOZ
12 7/8 6730 12IUBOZ
Note: Order hex nuts separately
Size Range 1/2” - 36”
In stock up thru 12” larger sizes - ask for availability
Finishes available: • Black • PVC Coated • SS
Finishes available: • PVC Coated
Special U-Bolts
Made to order:
Specify all dimensions as
shown in standard U-Bolt
diagram
One Hole
Pipe Strap
Size available 1/2” - 2”
E.G. and Copper
Two Hole
Pipe Strap
Size available 1/2” - 4”
E. G. and copper
“Short”
2-Hole
Strap
Sizes available in 1/2” -4”
Black and E.G.
Side Lock “J” Hanger
Part No.
Pipe Size (Electro-galvanized)
3/4 75DSLHZ
1 100DSLHZ
1 1/4 125DSLHZ
1 1/2 150DSLHZ
2 200DSLHZ
2 1/2 250DSLHZ
3 300DSLHZ
3 1/2 325DSLHZ
4 400DSLHZ
5 500DSLHZ
6 600DSLHZ
8 800DSLHZ
Sizes available 1/2”,
3/4” and 1” Black or Copper
Light duty residential hanger
for water, waste or gas
Wire Pipe
Hook
“Return”
Line J-Hook
Sizes available 1/2” - 4”
Black - E.G. - H.D.G.
Supports pipe 1” off the wall
J-Hook
Straight
Sizes available 1/2” - 4”
Black and E.G.
Riser Clamp for Plastic Pipe
Material: Carbon Steel
Finish: Plain, Electro-galvanized, plastic coated
Service: Designed for support of plastic DWV pipe
Pipe
Size
Pipe
OD
Max Rec Load
(lbs)
1 1/2 1.900 225
2 2.375 225
3 3.500 225
4 4.500 225
TAPCON
219
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
copper natick & van Hangers / Hardware attacHments
Max. Max.
Pipe Load Part No.
Size Size (lb) E.G.
1/4x3/8 3/8” 240 37C25RRCZ/B
3/8x1/2 2” 610 50C37RRCZ/B
1/2x5/8 31/2” 1130 62C50RRCZ/B
Rod Max. Load- Max. Load- Part No. Part No.
Size HS Plain Welded 40 Black 40W Black
3/8 1/2 240 610
1/2 5/8 440 1130
5/8 3/4 705 1810
3/4 7/8 1050 2710
7/8 1 1470 3770
1 1-3/16 1940 4960
Part No.
Rod Size Length E.G.
1/4 7/8 25CROCZ
3/8 1-1/8 37CROCZ
1/2 1-1/4 50CROCZ
5/8 2-1/8 62CROCZ
3/4 2-1/4 75CROCZ
7/8 2-1/2 87CROCZ
1 2-3/4 100CROCZ
1-1/8 3 112CROCZ
1-1/4 3-1/8 150CROCZ
Part No.
Rod Size Length E.G.
3/8 1-3/4 37C175RCLZ
1/2 1-3/4 50C175RCLZ
Note: Also Available In EG
Special Rod Sizes 1-2 1/2” Available
By Special Order
Max Part No.
Rod Size Load (lb) Black
3/8 1200
1/2 2200
5/8 3500
3/4 5200
7/8 7200
Note: Use With Malleable
“Ice Tong” Beam Clamp
Refer To Page No. 5-7 - Fig. 218
Also Available in E.G.
Max Part No.
Rod Size Load (lb) Black
3/8 610
1/2 1130
5/8 1550
3/4 2100
7/8 2350
Note:
• Forged Steel • 3/8 - 2 1/2 Rod Size
Also Available Black • E.G
Note:
• Malleable Iron • 1/4 - 7/8 Rod Size
Also Available Black • E.G
Tubing Std. Wt. Tubing Std. Wt.
Size Pkg. per 100 Size Pkg. per 100
1/2 25 7.0/CWT 1-1/4 25 8.0/CWT
3/4 25 7.5 1-1/2 25 10.0
1 25 7.5 2 25 11.5
Materials: Pre-copper plated low carbon steel
Ordering: Specify tube size and figure number
Tubing Std. Wt. Tubing Std. Wt.
Size Pkg. per 100 Size Pkg. per 100
1/2x6 25 7.5/CWT 1/2x12 25 13.0/CWT
3/4x6 25 7.5 3/4x2 25 13.0
1x6 25 9.0 1x12 25 14.0
1-1/4x6 25 9.5 1-1/4x12 25 15.0
1-1/2x6 25 11.0 1-1/2x12 25 16.0
2x6 25 12.5 2x12 25 17.0
Materials: pre-copper plated low carbon steel
Ordering: specify tube size - length - figure number
Note: Cotter Pin Included
Also Available Black • E.G.
Max Steel
Rod Load Pin
Size (lb) Size
3/8 610 1/2
1/2 1130 5/8
5/8 1810 3/4
3/4 2710 7/8
7/8 3770 1
1 4960 1-1/8
1-1/4 8000 1-3/8
1-1/2 11630 1-5/8
1-3/4 15700 1-7/8
2 20700 2-1/4
2-1/4 27200 2-1/2
2-1/2 33500 2-3/4
220 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
bang-it™ / wood-knocker™ / Hollow set drop-in
Wood-KnockerTM Product Offering
The Hollow Set Drop-In anchor is designed for anchoring in
hollow base materials such as hollow concrete block, brick with
weep holes, and hollow core pre-cast concrete plank. It can also
be used in solid base materials.
Part No. Anchor Drill Overall Sleeve Std. Std. Wt./
CS SS Size Dia. Length Length Box Ctn. 100
9320 9420 1/4 3/8 7/8 5/8 100 1000 1-3/4
9330 - 5/16 5/8 1-5/16 15/16 100 500 5-1/2
9340 9440 3/8 5/8 1-5/16 15/16 100 500 5-1/2
9350 - 1/2 3/4 1-3/4 1-1/4 100 100 9-1/2
9360 - 5/8 1 2 1-1/2 100 100 21
Anchor 1/4” 5/16” 3/8” 1/2” 5/8”
Hollow Tool 9323 9333 9343 9353 9363
Solid Tool 9322 9332 9342 9352 9362
Accessories
Quantity
Part No. Description per Box
7560 Bang-It Deck Driller 1
7562 13/16” Carbide Hole Saw for 1/4", 3/8" and 1/2" 1
7564 1-3/16” Carbide Hole Saw for 5/8", 3/4" and 7/8" 1
7566 Carbide Hole Saw Center Bit 1
Threaded inserts are color coded to easily identify
location and diameter of the internally threaded coupling,
allowing multiple trades on the same job to suspend their
systems with various size steel threaded rods.
A coil thread design is available for Bang-It and Wood-Knocker upon request in 1/2” and 3/4” sizes for forming applications.
Cast-in-Place Inserts
Drill the metal pan deck and simply step on the
Bang-It. The insert will click into place and fit
securely with the deck. After installation, the
inserts are ready for the pour. When the concrete
is cured the insert is ready to receive rod.
Part Pre-Drilled Std Pallet
No. Description Color Hole Box Qty.
7540 1/4 Brown 13/16 100 4,000
7542 3/8 Green 13/16 100 4,000
7544 1/2 Yellow 13/16 100 4,000
7546 5/8 Red 1-3/16 50 2,400
7548 3/4 Purple 1-3/16 50 2,400
7549 7/8 Black 1-3/16 50 2,400
Bang-ItTM Product Offering
Bang-It™
Hollow Set Drop-In
Cast-in-Place Inserts
Wood-Knockers are simply hammered into the
wood forms. The concrete is then poured. After
the concrete cures the forms are stripped away,
the underside of the insert is exposed and
ready to receive rod.
Part No. Description Color Std. Box Pallet Qty.
7550 1/4 Brown 200 9,600
7552 3/8 Green 200 9,600
7554 1/2 Yellow 200 9,600
7556 5/8 Red 150 6,000
7558 3/4 Purple 150 6,000
Wood-Knocker™
PartNo. Standard Drop-In Anchors
207STP-6-17 3/8" x 1-1/16" Carbide Stop-Bit
for 1/4" Standard Drop-in anchors
207STP-8-27 1/2" x 1-11/16" Carbide Stop-Bit
for 3/8" Standard Drop-in anchors
207STP-10-33 5/8" x 2-1/16" Carbide Stop-Bit
for 1/2" Standard Drop-in anchors
Part No. Mini Drop-In Anchors
207STP-10-19 5/8" x 1-3/16" Carbide Stop-Bit
for 1/2" Mini Drop-in anchors
207STP-8-13 1/2" x 13/16" Carbide Stop-Bit
for 3/8" Mini-Drop-in anchors
Don’t
over-
drill
Drill Bits
for Drop-
Ins and
Mini
Drop-Ins
SDS -Bit
221
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Fire / sprinkler / plumbing
“Emlok”
Sprinkler Rings
Pipe Size Part No. E.G. Thread Tap* Max.Load
1/2 50 DSPRZ 3/8 300
3/4 75 DSPRZ 3/8 300
1 100 DSPRZ 3/8 300
1-1/4 125 DSPRZ 3/8 300
1-1/2 150 DSPRZ 3/8 300
2 200 DSPRZ 3/8 300
2-1/2 250 DSPRZ 3/8 525
3 300 DSPRZ 3/8 525
3-1/2 350 DSPRZ 3/8 585
4 400 DSPRZ 3/8 650
5 500 DSPRZ 1/2 1000
6 600 DSPRZ 1/2 1000
8 800 DSPRZ 1/2 1000
Alsoavailableincopper
*ULandFMApprovedThread
TappedperNFPA
Junior Top Beam Clamps
Malleable Iron - 3/4” Opening
Part No. Part No.
Size Black E.G.
3/8 37CJTB 37CJTBZ
1/2 50CJTB 50CJTBZ
5/8 62CJTB 62CJTBZ
7/8 87CJTB 87CJTBZ
Drop In Anchors
Drill Part No.
Size Dia. E.G.
1/4 3/8 25CDIAZ
3/8 1/2 37CDIAZ
1/2 5/8 50CDIAZ
5/8 3/4 62CDIAZ
3/4 1 75CDIAZ
Rod Coupling - Standard
Part No.
Rod Size Length E.G.
1/4 7/8 25CROCZ
3/8 1-1/8 37CROCZ
1/2 1-1/4 50CROCZ
5/8 2-1/8 62CROCZ
3/4 2-1/4 75CROCZ
Threaded Rod - 6’ Length
Part No. Part No.
Size Length Black E.G.
1/4 x 6 ft 25C600THR 25C600THRZ
3/8 x 6 ft 37C600THR 37C600THRZ
1/2 x 6 ft 50C600THR 50C600THRZ
5/8 x 6 ft 62C600THR 62C600THRZ
3/4 x 6 ft 75C600THR 75C600THRZ
7/8 x 6 ft 87C600THR 87C600THRZ
1 x 6 ft 100C600THR 100C600THRZ
Notes:
• Threaded Rod in stock up to 2” in diameter
• THREADED ROD IN STOCK
IN 10 FT. AND 12 FT. LENGTHS
• Fully threaded studs cut to length available on demand
Part Rod/Anchor Drill Overall Thread Std.
No. Dia. Dia. Length Depth Box
6335 1/4" 5/8" 5/8" 5/8" 100
6322 3/8" 3/4" 3/4" 3/4" 50
6337 1/2" 1" 1" 1" 50
Mini Dropin™
SettingTools
PartNo.: 6336 6323 6338
AnchorSize: 1/4" 3/8" 1/2"
222 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Fire / sprinkler - sammy xpress®
Threaded Rod Hangers
General Application & Uses
• Hanging Pipe and Sprinkler Systems
• Lighting Systems & Overhead Utilities
• Suspended Ceilings
• Suspended Conduit and Cable Tray
• HVAC Ductwork and Strut Channels
• Mounting Security Equipment
Features and Benefits
• Sidewinders are the side mount ver-
sions of the Sammys.
Specifications
Materials: Zinc Plated Carbon Steel
Stainless Steel
Size Range: ¼" - ½" threaded rod for
Wood, Steel or Concrete
Base Steel Purlins & Beams,
Materials: Wood, Concrete
• One system for all rod hanging ap-
plications in steel, wood & concrete.
• Ease & speed of overhead installation.
• Lower in-place cost, when compared
to beam clamps, lag bolts & drop-ins.
• Steel and Wood Sammys™ are self-
drilling & tapping & can be installed
with a screw gun or hammer drill.
• Concrete Sammys™ are self-tapping
& can be installed with an adjust-
able torque, battery-powered screw
gun or hammer drill.
SAMMY'S
Model GST Wood Vertical Hangers
Self-threading into wood. No pre-drilling required
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
GST .750 1/4" 1/4" x 3/4" #14 —
GST 100 1/4" 1/4" x 1" #14 —
GST 200 1/4" 1/4" x 2" #14 —
GST 300 1/4" 1/4" x 3" #14 —
GST 600 1/4" 1/4" x 6" #14 —
GST .75 3/8" 1/4" x 3/4" #14 —
GST 10 3/8" 1/4" x 1" #14 —
GST 20 3/8" 1/4" x 2" #14 UL, FM, NFPA
GST 25-380 3/8" 3/8" x 2-1/2" #14 UL, NFPA
GST 30 3/8" 1/4" x 3" #14 UL, FM, NFPA
GST 40 3/8" 1/4" x 4" #14 NFPA
GST 60 3/8" 1/4" x 6" #14 NFPA
GST 2 1/2" 1/4" x 2" #14SW —
GST 2.5-380 1/2" 3/8" x 2-1/2" #14SW —
GST 3 1/2" 1/4" x 3" #14SW —
GST 4 1/2" 1/4" x 4" #14SW —
GST 6 1/2" 1/4" x 6" #14SW —
SAMMY'S
Model DST, DSTR & TEK Steel Vertical Hangers
DST - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
DSTR - Self-drilling and tapping in steel up to 3 ⁄
16" depth. Includes
retainer nut.
TEK - Self-drilling and tapping in steel up to ½" depth.
Packaged 25 per box.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
DSTR 100 1/4" 1/4-20 x 1" #14 —
DST 100 1/4" 1/4-14 x 1" #14 —
DST 150 1/4" 1/4-14 x 1-1/2" #14 —
DST 200 1/4" 1/4-14 x 2" #14 —
DST 250 1/4" 1/4-12 x 2-1/2" #14 —
DST 300 1/4" 1/4-14 x 3" #14 —
TEK 500 1/4" 12-24 x 1-1/2" #14 —
DSTR 1-1/2" 3/8" 12-24 x 1-1/2" #14 UL, FM, NFPA
DSTR 1" 3/8" 1/4-20 x 1" #14 UL, FM, NFPA
DSTR 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
DST 10 3/8" 1/4-14 x 1" #14 NFPA
DST 15 3/8" 1/4-12 x 1-1/2" #14 NFPA
DST 20 3/8" 1/4-14 x 2" #14 NFPA
DST 25 3/8" 1/4-14 x 2-1/2" #14 NFPA
DST 30 3/8" 1/4-14 x 3" #14 NFPA
DST 516 3/8" 5/16"-18 x 1-1/4" #14 UL, NFPA
TEK 50 3/8" 12-24 x 1-1/2" #14 FM, NFPA
DST 2.0 1/2" 1/4-14 x 2" #14SW —
DST 2.5 1/2" 1/4-14 x 2-1/2" #14SW —
DSTR 1.0 1/2" 1/4-20 x 1" #14SW —
DSTR 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
DST 5.16 1/2" 5/16"-18 x 1-1/4" #14SW —
TEK 5.0 1/2" 12-24 x 1-1/2" #14SW —
SAMMY'S
Model CST Concrete Vertical Hangers
Self-tapping into concrete. Pre-drilling required with 1/4" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
CST 200 1/4" 5/16" x 1-1/2" #14 —
CST 20 3/8" 5/16" x 1-1/2" #14 FM
CST 2 1/2" 5/16" x 1-1/2" #14SW —
SAMMY'S
SAMMYS Threaded Rod Anchors require the use of
the appropriate Nut Driver to maintain warranty
status. Please see page 97 for ordering information
Vertical Applications
223
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Fire / sprinkler - sammy xpress®
Sammys™ Sidewinders™
SAMMY'S
SAMMY'S
Swivel Head™
Hangers
Model SWG Wood SIDEWINDERS™ Hangers
Self-threading into wood. No pre-drilling required. 25/box
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
SWG 100 1/4" 1/4" x 1" #14SW —
SWG 200 1/4" 1/4" x 2" #14SW —
SWG 10 3/8" 1/4" x 1" #14SW —
SWG 20 3/8" 1/4" x 2" #14SW NFPA
SWG 25-380 3/8" 3/8" x 2-1/2" #14SW NFPA
SWG 30 3/8" 1/4" x 3" #14SW —
SAMMY'S
Model SWD, SWDR & SWT Steel SIDEWINDERS™
Hangers
SWD - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
SWDR - Self-drilling and tapping in steel up to 3 ⁄
16" depth.
Includes retainer nut.
SWT - Self-drilling and tapping in steel to ½" depth
ALL Models SWD, SWDR & SWT use Nut Driver #14SW
Packaged 25/box
Rod Screw Shank
Model No. Dia. Size & Length Approvals
SWD 10 3/8" 1/4-14 x 1" NFPA
SWD 15 3/8" 1/4-14 x 1-1/2" NFPA
SWD 20 3/8" 1/4-14 x 2 NFPA
SWD 516 3/8" 5/16-18 x 1-1/4" NFPA
SWDR 1-1/2" 3/8" 1/4-20 x 1" UL, NFPA
SWDR 1" 3/8" 1/4-20 x 1-1/2" UL, NFPA
SWDR 516 3/8" 5/16-18 x 1-1/4" UL, NFPA
SWT 15 3/8" 12-24 X 1-1/2" NFPA
SAMMY'S
Model SWC Concrete SIDEWINDERS™ Hangers
Self-tapping into concrete. Pre-drilling required with ¼" bit.
Rod Screw Shank Nut
Model No. Dia. Size & Length Driver Approvals
8017925 1/2" 1/4" x 6" #14SW —
SWC 200 1/4" 5/16" x 1-1/2" #14SW —
SWC 20 3/8" 5/16" x 1-1/2" #14SW NFPA
Complete technical specifications are available:
Contact your Sales Person or Customer Service for
more information, including Sammys® products tested
for seismic restraint
• Allows 17° deflection from vertical.
• Accommodates up to 3½ x 12 pitch roof.
• Available in Stainless Steel.
• Uses #14 (Black) Nut Driver
(Models SH-GST and SH-DSTR) or
#14SH (Orange) Nut Driver (Model
SH-GST/CST)
• UL and NFPA approved
• Packaged 25 per box
For Wood
Model SH-GST Wood Swivel Head Hangers
Self-threading into wood. No pre-drilling required.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-GST 20 Zinc Plated Steel 3/8" 1/4" x 2"
SH-GST 22SS Stainless Steel 3/8" 1/4" x 2"
SH-GST 30 Zinc Plated Steel 3/8" 1/4" x 3"
SH-GST 30SS Stainless Steel 3/8" 1/4" x 3"
8113910 #14 (Black) Nut Driver
For Steel
Model SH-DSTR Steel Swivel Head Hangers
Self-drilling and tapping in steel up to 3/16" depth.
Includes retainer nut.
Rod Screw Shank
Model No. Material Dia. Size & Length
SH-DSTR 1 Zinc Plated Steel 3/8" 1/4" x 1"
SH-DSTR 1-SS Stainless Steel 3/8" 1/4" x 1"
8113910 #14 (Black) Nut Driver
For Wood and Concrete
Model SH-GST/CST Concrete Swivel Head Hangers
Self-threading in wood; requires 1/4" pre-drilled pilot hole
in concrete. Zinc Plated Steel.
Rod Screw Shank
Model No. Dia. Size & Length
SH-GST/CST 20 3/8" 1/4" x 1-3/4"
SH-GST/CST 2.0 1/2" 1/4" x 1-3/4"
8273910 #14SH Orange Nut Driver
89°
Deflection
From
Vertical
17°
Deflection
From
Vertical
17°
Deflection
From
Vertical
224 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Fire / sprinkler - sammy xpress®
SAMMY XPress™ Hangers
• Hang threaded rod directly from thin gauge metal deck
(22-16 ga.) and purlin (18-16 ga.).
• Expands to provide direct vertical attachment.
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• Packaged 25/box
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
XP 20 22-20 3/8" 1/4-20 x 1-1/8" UL, NFPA
XP 35 18-16 3/8" 1/4-20 x 1-1/8" UL, NFPA
XPIT Sammy X-Press Universal Installation Tool
XPDB 25/34" Drill Bit
Model Rod Screw Shank
No. Gauge Dia. Size & Length Approvals
SWXP 16-12 3/8" 1/4-20 x 1-1/8" UL
XPIT Sammy X-Press Universal Installation Tool
SAMMY XPress™ Sidewinder Hangers
• Hang threaded rod directly from purlin
(16-12 ga.).
• Expands to provide direct horizontal at-
tachment.
• Use in applications where easy access to
back of the installed fastener is prohibited.
No retaining nut required.
• 25/box
• Universal Installation Tool Kit includes
Sleeve, Bit Receiver, Hex wrench and
25/64" drill bit.
SAMMY XPress™ Swivel Hangers
Drill, Drive, Done!
• Pipe hanger for extreme roof pitches; 89° in purlin (Min.
16 ga.), 45° in metal deck (Min. 22 ga.) for 12/12 pitch.
• Installs in seconds, saves time and installation costs..
• Use in applications where easy access to back of the in-
stalled fastener is prohibited. No retaining nut required.
• Universal Installation Tool Kit includes Sleeve, Bit Re-
ceiver, Hex wrench and 25/64" drill bit.
• 25/box, UL approved (UL203, UL203A pending).
Part Rod Pipe Test
No. Dia. Size Gauge Load
8294922 3/8" 3/4" - 2" 22 - 20 750 lbs.
8295922 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
8272957 1/2" 3/4" - 2" 22 - 20 750 lbs.
8271957 3/8" 3/4" - 3.5" 16 - 12 1250 lbs.
XPIT Sammy X-Press Universal Installation Tool
Metal Deck, Min 22 ga.
Swivels up to 89°
SAMMY Xpress
installation sequence
SAMMY Xpress
Universal Tool
SAMMY'S
SH-TEK 50
Swivel Head™
Hangers
Tested to Zone 4 Seismic Requirements
• Flexible head hangs plumb in extreme
roof pitches (12/12) - 0°-89° off vertical.
• Double fluted TEKS® point to improve
drill performance with less effort.
• No pre-drilling required.
• Non-walking point for fast material en-
gagement.
• No retaining nut required; access to
the back of the installed fastener is not
required.
• Installs with installation tool #14SH
(Orange) Nut Driver
• Listing: UL 203A (pending).
Rod Screw Shank
Part No. Dia. Size & Length Approvals
8268957 3/8" 12-24 x 1-5/8" UL
8270957 1/2" 12-24 x 1-5/8" UL
8273910 #14SH Orange Nut Driver
225
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Fire / sprinkler - sammy xpress® / vertigo™
Universal Installation Kit
• Includes: Adaptor Plug, Socket Driver
for SAMMY Super Screws, Socket
Driver for Ceiling Wire Screws, Socket
Driver for ¼" Standard Nut Drivers,
Stud Plug for Viper or Ladd Powder
Actuated Attachment.
Model No.
SPE139 Universal Installation Kit
Speedy Pole Tool™ & Socket
The Pole Tool and Universal Socket Kit
provides easy and safe installation for:
SAMMYS™ • Threaded Rod • Pencil Rod
Ceiling Screws • Wire • Jack Chain • Screws.
Model No.
130 Speedy Pole Tool 6' (3' - 6')
131 Speedy Pole Tool 12' (4' - 12')
132 Speedy Pole Tool 18' (6' - 18')
133 Speedy Pole Tool 24' (8' - 24')
138 SAMMYS™ Socket Driver
3004 Ceiling Wire Socket Driver
SAMMY'S X-Press It®
Universal Installation Tool
• Universal Installation Tool Kit
includes Sleeve, Bit Receiver,
Hex wrench and 25/64" drill bit.
Part No.
8194910 UXPIT Universal
X-Press It Tool
8195910 Retro Socket for
8151910 (Old Tool)
8152910 25/64" Drill Bit
SAMMY'S Nut Drivers
• #14 (Black) Nut Driver, for use with SAM-
MYS™ & Swivel Head™ SAMMYS™. (See
individual SAMMY'S Listing for correct
Nut Driver).
Part No.
8113910 #14 (Black) Nut Driver
• #14SW (Red) Nut Driver for use with
Sidewinders and 1/2" rod SAMMY'S. (See
individual SAMMY'S Listing for correct
Nut Driver).
Part No.
8114910 #14SW (Red) Nut Driver
Unique spin-off feature provides a fast and safe
installation. When the face of the driver comes
into contact with the material you are installing
into, continue drilling until nut driver spins free.
Installation is then complete.
#14SW
#14
Screw Shank
Part No. Rod Size Size & Length Thread Style Box Carton
7171 1/4 1/4x1-1/4 WBthread 100 500
7173 3/8 1/4x1-1/2 WBthread 100 500
7175 1/2 3/8x2-3/4 WBthread 50 250
Rod Screw Shank Point
Part No. Size Size & Length Style Box Carton
No. 3 for Purlins
7183 1/4 1/4-20x1 No.3 100 500
7184 3/8 1/4-20x1(withnuts) No.3 100 500
7186 3/8 1/4-20x1-1/2(withnuts) No.3 100 500
7188 3/8 1/4-20x2(withnuts) No.3 100 500
No. 5 for Beams
7200 1/4 12-24x1-1/2 No.5 100 500
7201 3/8 12-24x1-1/2(withnuts) No.5 100 500
Screw Shank Point
Part No. Rod Size Size & Length Style Box Carton
7185 1/4 1/4x1 Type17 100 500
7205 3/8 1/4x1 Type17 100 500
7170 3/8 1/4x2 Type17 100 500
7156 3/8 3/8x2-1/2 Type17 100 500
Part No. Description Color Box Carton
Nut Driver Socket
7187 UniversalSteelandWoodSocket Red 5 25
7195 1/4”concretesocket Blue 5 25
7197 3/8”concretesocket Blue 5 25
7198 1/2”concretesocket Blue 5 25
See page 98 for full information
See pages 94-97 for full information
226 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
tolco seismic
Pipe Clamp for Sway Bracing - Fig 4A
∙Carbon steel construction. Braces pipe
against sway and seismic disturbances.
∙Available for 4" through 8" pipe.
∙Stock: Plain finish (PLN).
∙Special Order: Electro-Galvanized, HDG fin-
ish or Stainless Steel, call for availability.
Part No Pipe Size Std Pkg
Surge Restrainer - Fig 25
∙Steel construction.
∙Designed to restrict the upward movement of
piping occuring during sprinkler head activa-
tion or seismic activity.
∙For use with ¾" to 2" steel or PVC pipe.
∙Stock: Pre-galvanized finish.
Part No Std Pkg
Rod Stiffener - Fig 98
∙Secure channel to hanger rod for vertical
seismic bracing.
∙Stock: Electro-Galvanized (EG) steel.
∙Special Order: HDG finish or Stainless Steel,
call for availability.
Part No Std Pkg
Seismic
4-Way Longitudinal Sway Brace Attachment
Fig 907
∙Carbon steel construction.
∙For bracing pipe against sway and seismic disturbances.
∙Functions as a longitudinal brace connection when attached to
a lateral brace pipe.
∙Stock: Plain finish (PLN).
∙Special Order: Electro-Galvanized or HDG
finish, call for availability. Sold individually.
Braced Pipe/Bracing Pipe
Part No Size
#69R - Retrofit Strap #69 - Retaining Strap
Retaining Straps - Fig 69, 69R
Fully Engineered System
Seismic and Vibration /
Isolation Products
Call for details
Fast Attach - Universal Sway
Brace Attachment - Fig 981
∙Size Range — One size fits bracing pipe 1”
thru 2”, TOLCO 12 gauge channel, and all
structural steel up to 1/4” thick.
∙Function — Multi-functional attachment to
hanger rod, trapeze rod, structure or braced
pipe fitting.
Bar Joist Sway Brace
Attachment - Fig 825
∙Size Range — One size accommodates all
TOLCO Fig. 900 Series sway brace attach-
ments. Maximum Horizontal Design Load
2015 lbs.
∙Function — To attach sway bracing and
hanger assemblies to steel open web struc-
tural members.
Bar Joist Sway Brace Attachment - Fig 825A
∙Size Range — One size accommodates all
TOLCO Fig. 900 Series sway brace attach-
ments. Maximum Horizontal Design Load
1265 lbs.
∙Function — To attach sway bracing to steel
open web structural members.
227
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
tolco seismic
Sway Brace Attachment - Fig 1001
∙Carbon steel construction.
∙Braces pipe against sway & seismic disturbances.
∙Available for 2½" thru 8" pipe.
∙Accomodates 1" thru 1¼" Schedule 40 IPS
pipe for bracing.
∙Stock: Plain finish (PLN).
∙Special Order: Electro-Galvanized
or HDG finish, call for availability.
Braced Pipe/Bracing Pipe
Part No Size Std Pkg
Fast Attach — Cable Sway Brace Attachment
Fig 991
∙Attaches sway brace to hanger rod.
∙To be used with 7 x 19 strand core
pre-stretched galvanized aircraft cable.
∙Size range: 1⁄8", 3⁄16" and ¼" cable.
Fits 3⁄8" through ¾" hanger rod bolt.
Stock: Electro-Galvanized (EG) finish.
Cable/Rod
Part No Size Std Pkg
No-Thread Swivel Sway Brace
Attachment - Fig 909
∙The structural component of a sway and
seismic bracing system.
∙Designed for 1" bracing pipe. For brace
pipe sizes larger than 1" use TOLCO 980.
∙Carbon steel construction.
∙Stock: Electro-Galvanized finish (EG).
∙Special Order: Plain or HDG finish, call
for availability.
Part No Std Pkg
Cable Sway Brace Attachment - Fig 990
∙Attaches sway brace to structure or hanger.
∙To be used with 7 x 19 strand core pre-
stretched galvanized aircraft cable.
∙Size range: 1⁄8", 3⁄16" and ¼" cable. ¼"
thru 1" hanger rod or fastener.
∙ Mounts to any surface angle.
∙Stock: Electro-Galvanized (EG) finish.
Cable/Rod
Part No Size Std Pkg
Universal Swivel Sway Brace Attachment
Fig 980
∙Multi-functional attachment to struc-
ture or braced pipe fitting.
∙One size fits bracing pipe 1" through
2" diameter, 12 gauge channel and
all structural steel up to ¼" thick.
∙Carbon steel construction.
∙Stock: Plain (PLN) or Electro-Galva-
nized (EG) finish.
Part No Std Pkg
Fast Clamp Sway Brace Attachment - Fig 100000
∙Carbon steel construction.
∙Braces pipe against sway and seis-
mic disturbances.
∙Available for 1" through 6" pipe
Schedule 10 through 40 IPS.
∙Accomodates 1" through 1¼" Sched-
ule 40 IPS pipe for bracing.
∙Approved for use (UL) to brace Sched-
ule 7 sprinkler pipe up to 4".
∙Stock: Plain finish (PLN).
∙Special Order: Electro-Galvanized,
HDG finish or Stainless Steel, call
for availability.
Braced Pipe/Bracing Pipe
Part No Size Std Pkg
228 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
seismic bracing
Seismic
Full Engineering
Services Provided
Rigid Component Bracing System -
Utilizing Strut Channel and Strut Fittings and Accessories
Transverse Rigid Bracing
for Rectangular Duct
Clevis Hanger Transverse Rigid Bracing
1/2” through 24” Pipe Size
Universal Swivel Sway Brace Attachment
Fig 980
∙Multi-functional attachment to struc-
ture or braced pipe fitting.
∙One size fits bracing pipe 1" through
2" diameter, 12 gauge channel and
all structural steel up to ¼" thick.
∙Carbon steel construction.
∙Stock: Plain (PLN) or Electro-Galva-
nized (EG) finish.
Part No Std Pkg
Fast Attach - Universal Sway
Brace Attachment - Fig 981
∙Size Range — One size fits bracing pipe 1”
thru 2”, TOLCO 12 gauge channel, and all
structural steel up to 1/4” thick.
∙Function — Multi-functional attachment to
hanger rod, trapeze rod, structure or braced
pipe fitting.
Fast Clamp Sway Brace Attachment - Fig 100000
∙Carbon steel construction.
∙Braces pipe against sway and seis-
mic disturbances.
∙Available for 1" through 6" pipe
Schedule 10 through 40 IPS.
∙Accomodates 1" through 1¼" Sched-
ule 40 IPS pipe for bracing.
∙Approved for use (UL) to brace Sched-
ule 7 sprinkler pipe up to 4".
∙Stock: Plain finish (PLN).
∙Special Order: Electro-Galvanized,
HDG finish or Stainless Steel, call
for availability.
Braced Pipe/Bracing Pipe
Part No Size Std Pkg
229
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
seismic bracing / wire rope
Wire Rope System -
Utilizing Galvanized Wire Rope and Components
Transverse Cable Bracing for Trapeze
Supported Pipe or Conduit Systems
Wire Rope
Seismic Bracing Systems
Galvanized Wire Rope
Dia. Construction Part No
Fast Attach — Cable Sway Brace Attachment
Fig 991
∙Attaches sway brace to hanger rod.
∙To be used with 7 x 19 strand core
pre-stretched galvanized aircraft cable.
∙Size range: 1⁄8", 3⁄16" and ¼" cable.
Fits 3⁄8" through ¾" hanger rod bolt.
Stock: Electro-Galvanized (EG) finish.
Cable/Rod
Part No Size Std Pkg
Cable Sway Brace Attachment - Fig 990
∙Attaches sway brace to structure or hanger.
∙To be used with 7 x 19 strand core pre-
stretched galvanized aircraft cable.
∙Size range: 1⁄8", 3⁄16" and ¼" cable. ¼"
thru 1" hanger rod or fastener.
∙ Mounts to any surface angle.
∙Stock: Electro-Galvanized (EG) finish.
Cable/Rod
Part No Size Std Pkg
Rod Stiffener - Fig 98
∙Secure channel to hanger rod for vertical
seismic bracing.
∙Stock: Electro-Galvanized (EG) steel.
∙Special Order: HDG finish or Stainless Steel,
call for availability.
Part No Std Pkg
230 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VIBRATION ISOLATION PRODUCTS - VMC
Series “AWMR” Restrained Spring-Flex Mountings
The design incorporates a rugged welded steel housing with vertical and horizontal
limit stops able to withstand a minumum of 1.0g accelerated force in all directions.
Loads to 10,000 pounds and static deflections to 2”. They are particularly recom-
mended for equipment with differing installed and operating loads such as cooling
towers and chillers or equipment subjected to severe wind loads.
Series “ASCM” Restrained Spring-Flex Mountings
Designed for seismic and restrained applications, these mountings when properly
installed and adjusted will restrain mechanical equipment during a seismic event. For
equipment that requires restrained isolators due to change in load, the ASCM incor-
porates a vertical limit stop to reduce motion.
ASCM
AWMR
Spring Mounts
Type 4
Series “RSH”
Spring Flex Hanger
Noise and Vibration
Isolator
• Isolator for both vibration and
noise for suspended piping
and equipment
• Color coded spring and
neoprene element
• Load range 21 lbs to 5,000 lbs
• Up to 5” of static deflection
Type 8
Series “SH”, “SHSC”
Spring Flex Hangers
Vibration Isolator
• Isolator for suspended piping and
equipment
• Color coded spring
• Load range 21 lbs to 5,000 lbs
• Up to 5” of static deflection
Type 23
Series “RH”, “RHD”
Neoprene Hangers
Noise Isolator
• Colored neoprene element
identifying capacity
• Load range 35 lbs to 4,000 lbs
• .25” to .50” deflection
“E-Z” Cut Pads
Typical Applications
HVAC Equipment -
Compressors - Chillers
Motor Generators -
Diesel Generator Sets
Presses -
Lathes - Pumps - Shears
Steam Generators -
Transformers - Textile Machines
• Standard sheet size - 18” x 18”
x 3/4” thick
• Easily cut to fit required loading
• Molded in colored oil-resistant
neoprene for easy identification
Stocked in Black
Maxi-Flex Pad’s
sectional construction
allows easy separation of
segments with a utility knife
or shears, and should be
used in full segments.
Choose
the number of
segments required
and tailor-make for
the most effective shape
for the equipment base.
Extra segments can be used
for increased loading.
Recommended Load Ratings
per 2” x 2” segment
Color Code Load Rating
Blue 120 lbs
Black (std) 180 lbs
Red 240 lbs
Green 360 lbs
231
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Straight Sleeves, Solid & Split Sleeves (with or without Nail Tabs),
Q-Deck Sleeves
Materials: Schedule 40 Steel Pipe, Sheet Metal
Waterproof Sleeves
Materials: Schedule 40 Steel Pipe and Steel Plate
Cast-In-Place Firestop Sleeves
Applications:
• 2", 3", 4", and 6" trade size plastic or metallic pipes
• Insulated metallic pipes
• Cable bundles
• Concrete ranging in depth from 2-1/2" to 8"
• Concrete greater than 8" using available extension tubes
• Concrete over steel deck using available Deck Adapter Kit
Link Seals
Materials: Seals - EDPM or Silicone; Hardware - Plated Steel,
304 or 316 Stainless Steel
SLEEVES
NEFCO Provides Custom Fabrication
for the Following Types of Sleeves:
SteelSheet Metal Waterproof
Cast-In-PlaceFirestopLink Seals
Pipe Sleeves are used in ALL TYPES of Concrete Construction
Ordering:
• Specify nominal pipe size "A", Dimension "B"
and overall length
232 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIRE HANGING SYSTEMS
High Speed Hanger Solutions for HVAC, Mechanical, Lighting, and other Electrical Services
HID Lighting Spiral Duct Rectangular Duct
Air Handling Units
Conduit Racks
GRIPPLE
Call for
Hanger Kits
and Accessory
Ordering
Caddy Speed
Link
See page 235
Cradle & Corner Saddles
Two Gripple Assemblies
& Strut Support
Single Point: Gripple at top
Double Point: Cradle
Primary support and safety line
Cable Basket
233
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
GRIPPLE® HANGING SYSTEMS
GRIPPLE Trapeze Fitting for Strut
GRIPPLE provides nearly unlimited overhead hanging solutions, designed to save both time and money.
Call us or visit www.gripple.com for a complete listing of GRIPPLE Solutions
234 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RIZE KWIC-LOC HANGING SYSTEMS
Kwic-Locs
The RIZE KWIC-LOC cable lock can be used as a fast and reliable way to
suspend fluorescent lighting, HID's, sound systems, cable trays, and fan units.
Cable locks are to be used on static load applications only.
Features:
• Zinc Housing: One-piece, die-cast, zinc alloy combines major anti-corrosion
properties with strength.
• Locking Wedges: An oil impregnated sintered steel locking wedge is seated
in each of two channels. Both wedges incorporate a release pin for easy
adjustment. Each wedge makes contact with the cable using serrated teeth.
These teeth press onto the cable and spread the load across the length of
the wedge, maximizing grip strength.
• Stainless Steel Springs: Assures the initial engagement of the locking
wedge to the wire rope.
KL-200 Kwic-Loc
The largest of the Kwic-Loc Seeries with the highest safe work load limit; perfect for hanging sound
systems and heavy cable tray.
KL-150 Kwic-Loc
Significantly smaller in size and with a lower safe work load limit than the KL-200, the KL-150 may
be used to hang heavy cable baskets and HID lights.
KL-100 Kwic-Loc
Works on most lighting applications. It can be used to hang fluorescent lights, speakers, busbar
and cable tray to name a few.
KL-50 Kwic-Loc
A solution for lightweight hanging applications. Signs, lighting and gallery displays are the perfect
applications for this size cable lock.
Cut-Away View of Kwic-Loc
Kwic-Loc Range and Selection Guide
Kwic-Loc Size Typical Applications Wire Rope Diameter Safe Working Load
5:1 Safety Factor
Safe Working Load
4:1 Safety Factor
KL-200 Sound Systems,
Heavy Cable Tray
1/8" 25-250 lbs. 25-312 lbs.
3/16" 50-640 lbs. 50-800 lbs.
4 mm 25-180 kg. 25-227 kg.
KL-150 Heavy Cable Basket
HID Lights
3/32" 25-150 lbs. 25-187 lbs.
1/8" 25-225 lbs. 25-281 lbs.
2.5 mm 12-100 kg. 12-125 kg.
3.0 mm 12-120 kg. 12-150 kg.
KL-100
Fluorescent Lights,
Speakers, Busbar,
Cable Tray
1/16" 0-75 lbs. 0-93 lbs.
3/32" 25-150 lbs. 25-187 lbs.
2.0 mm 12-55 kg. 12-68 kg.
2.5 mm 12-100 kg. 12-125 kg.
KL-50 Signs, Lighting, Gallery
Displays
1/32" 0-14 lbs. 0-18 lbs.
3/64" 0-46 lbs. 0-57 lbs.
1.2 mm 0-21 kg. 0-26 kg.
KL-100SK161 Starter Kit - (1) 500' roll 1/16" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
KL-100SK332 Starter Kit - (1) 500' roll 3/32" cable, (100) KL-100 Kwic-Loc Clamps, (1) Bucket with Cable Counter Lid,
(1) Cable Cutter
235
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADDY® SPEED LINK
CADDY® SPEED LINK LD
Universal Support System
Features
• Ideal in lighting, ductwork, and other instal-
lation projects
• Cost-effective alternative to hack chain,
threaded rod, and associated hardware
• Safe working load of 20kg (44 lb)
• Meets the fire rating requirements for DIN
4102-2 for 30 minutes at 30 percent of
rated load
• 5:1 safety factor
• Sleek low-profile locking device reduces
visual impact
• Adjustable after installation
• Available in stainless steel for applications
where a higher level of corrosion resistance
is required
• Works with a variety of CADDY Fasteners
CADDY® SPEED LINK LD
Wire rope diameter: 1.5mm (0.059 inch)
Safe working load: 20kg (44 lb)
CADDY® Toggles
A new universal toggle and Y-toggle for CADDY SPEED LINK LD makes overhead lighting and over-
head decking installation even easier. For overhead decking applications, a universal toggle/wire
rope assembly is now available in 2m (6.6 ft), 5m (16.4 ft), and 10m (32.8 ft) lengths. the part is
identical to standard CADDY SPEED LINK LD, except the hook is replaced with a toggle. An optional
Y-toggle easily hangs lights. It consists of a 500mm (20 in.) or 800mm (31 in.) length of wire repo
with a toggle on each end. The center of the wire rope is looped and crimped.
CADDY® Speed Link Tools & Accessories
SLADS SLLC250 SLWC
SLWPT SLADCP
SL1518, SL1214 SLEBWS
Part No. Wire Length Material Pkg Qty.
SLD15L2 6.6 ft long Galvanized steel 20
SLD15L5 16.4 ft long Galvanized steel 20
SLD15L10 32.8 ft long Galvanized steel 20
SLD15L2S 6.6 ft long Stainless steel 2
SLD15L5S 16.4 ft long Stainless steel 2
SLD15L10S 32.8 ft long Stainless steel 2
Part No. Wire Length Pkg Qty.
SLD15Y500 20 in. leg length 20/bag; 5 bags/box
SLD15Y800 32 in. leg length 20/bag; 5 bags/box
SLD15L2T 6.6 ft. long 20/bag; 5 bags/box
SLD15L5T 16.4 ft. long 20/bag; 5 bags/box
SLD15L10T 32.8 ft. long 20/bag; 5 bags/box
Part No. Description Pkg Qty
SLADCP Air Duct Corner Protector 10
SLADS Air Duct Support Attachment 100
SLWPT Wire Insulation Protection Tube 25M
SL1214 Cable Clip 12-14 mm 100
SL1518 Cable Clip 15-18 mm 100
SLLC250 Lighting Clip, 6 mm 200
SLEBM6 Eye Bolt M6; 30 mm long 100
SLEBWS Eye Bolt for Wood, H6; 60 mm long 100
236 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Base w/ (2)
1/2" Electro
Zinc All-
Threaded
Rod Risers
and 14 ga.
Galvanized
Slotted
Channel
Dimensions - Base; 4" H x 6" W x 9.6" L
Ultimate Load Capacity - 200 lbs. (To
increase load capacity use CLDP10
load distribution plate.)
Dura-Blok™ DBE-Series channel sup-
port is designed as a support
of piping systems, cable tray, HVAC
equipment and many other
applications where elevation adjust-
ment is critical.
Part Adjustable Load
No. Height Cap.
DBE10-8 5-1/2 to 8" 200 lbs.
DBE10-12 5-1/2 to 12" 200 lbs.
DBE10-16 5-1/2 to 16" 200 lbs.
ROOFTOP SUPPORTS
Your Complete
Source for Rooftop
Supports
Base Only
Dura-Blok™ channel support is
designed as an economical support
for piping systems, cable tray, HVAC
equipment and many other applica-
tions. The Dura-Blok™ is UV resistant
and is suitable for any type of roofing
material or other flat surfaces. Mate-
rial effectively accepts screw fasteners
for securing accessories.
Specifications:
Dimensions - 4" H x 6" W x 4.8" or
9.6" L (base length)
Material - 100% recycled rubber, UV
resistant
Ultimate Load Capacity - 500 lbs.
(uniform load)
DBM
DBP
DB10
DB20
DB30
Base w/ 14 ga. Galvanized
Channel - 1" H
Dura-Blok™ DB-Series channel sup-
port is designed for superior support
of piping systems, cable tray, HVAC
equipment, walkway systems and
many other applications. The Dura-
Blok™ is UV resistant and suitable
for installation on any type of roofing
material or other flat surfaces.
Specifications:
Dimensions - 5" H x 6" W
Part Load
No. Length Cap.
DB5 4.8" 500 lbs.
DB10 9.6" 500 lbs.
DB20 20.2" 1000 lbs.
DB30 30.8" 1500 lbs.
DB40 41.4" 2000 lbs.
DB48 52" 2500 lbs.
Base w/ 12 ga. Galvanized
Channel - 2-7/16" H
Specifications:
Dimensions - 6-7/16" H x 6" W
Part Load
No. Length Cap.
DB610 4.8" 500 lbs.
DB620 9.6" 1000 lbs.
DB630 20.2" 1500 lbs.
DB640 30.8" 2000 lbs.
DB648 41.4" 2500 lbs.
2-Bases w/ 12 ga.
Galvanized Channel - 1-5/8" H
Specifications:
Dimensions - 5-5/8" H x 6" W
Ultimate Load Capacity - 1000 lbs.
(uniform load)
Part Bridge Ind. Base
No. Length Length
DB10-28 28" 9.6"
DB10-36 36" 9.6"
DB10-42 42" 9.6"
DB10-50 50" 9.6"
DB10-60 60" 9.6"
(2) Base Supports w/ 12 ga.
Galvanized Channel - 1-5/8" H
Riser Channels - 1-5/8" x
1-5/8" x 12 ga.
Fittings & Hardware -
Electroplated Steel
Ultimate Load Capacity - 1,000 lbs.
Dimensions - 23" to 53" H x 25-5/8" to
55-5/8" W x 20.2" L
Please call for specific item information.
DB_DS Series
DB10 Series DBE Series
237
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Your Complete
Source for Rooftop
Supports
ROOFTOP SUPPORTS
Base with (1)
3/8” Electro
Zinc All-
Threaded Rod
and Hinged
Pipe Clamp
Base Dim: 6" W x 4.8" L
Pipe Clamp Material:
Malleable Iron or
Dura Copper®
Threaded Rod/
Hardware - Electro
Plated Steel
Ultimate Load Capacity - 50 lbs.
Dura-Blok™ DBM-Series pipe/tubing
support is designed for support of
single piping systems where elevation
adjustment is needed. The Dura-Blok™
is UV resistant and suitable for instal-
lation on any type of roofing material
or other flat surfaces.
Malleable Iron Pipe Clamp
Part Height Pipe
No. Min-Max Size
DBM-1/2 9.86"-11.36" 1/2"
DBM-3/4 10.06"-11.56" 3/4"
DBM-1 10.14"-11.64" 1"
DBM-1-1/4 10.25"-11.75" 1-1/4"
DBM-1-1/2 10.42"-11.92" 1-1/2"
DBM-2CT 10.66"-12.16" 2"
Dura-Copper® Pipe Clamp
Part Height Pipe
No. Min-Max Size
DBM-1/2CT 9.69"-11.19" 1/2"
DBM-3/4CT 9.84"-11.34" 3/4"
DBM-1CT 9.95"-11.45" 1"
DBM-1-1/4CT 10.13"-11.63" 1-1/4"
DBM-1-1/2CT 10.28"-11.78" 1-1/2"
DBM-2CT 10.53"-12.03" 2"
DBM Series
DBR Series
Base with 14 ga. Galvanized
Channel - 1" High & Pipe
Roller Assembly
Fixed Height
Pipe Roller Material - Electro Plated
Cast Iron; Brackets, Axle, & Hardware
- Electro Plated Steel
Dura-Blok™ DBR-Series support is
designed to support pipe where lon-
gitudinal movement is expected. The
Dura-Blok™ is UV resistant and ap-
proved for installation on any type of
roofing material or other flat surfaces.
Part Pipe Load
No. Size Cap.
DBR2-3½ 2"-3½" 500 lbs.
DBR4-6 4"-6" 500 lbs.
DBR8-10 8"-10" 1000 lbs.
DBR12-14 12"-14" 1000 lbs.
DBR16-20 16"-20" 1000 lbs.
Base with (2) 1/2" Electro Zinc
All-Threaded Rod Risers and
Pipe Roll with Sockets
Adjustable Height
Dimensions - Adjustable up to 12"
from bottom of base to pipe contact
point on roller.
Base - 4" H x 6" W x 9.6" L (base length)
Pipe Roll & Sockets - For up to 3½"
pipe sizes.
Ultimate Load Capacity - 200 lbs. (To
increase load capacity use CLDP10
load distribution plate.)
Dura-Blok™ DBR-Series support is
designed to support pipe up to
3½"" nominal size where difference in
elevation is required and longitudinal
movement is expected. The Dura-
Blok™ is UV resistant and approved
for installation on any type of roofing
material or other flat surfaces.
Part Pipe Load
No. Size Cap.
DBR10-12 Up to 3½" 200 lbs.
DBR10-12
Load Distribution Plate
Increases ultimate uniform load
capacity on DBE & DBR Series
Dimensions - 15/8" W x 61/2" L
Material - 11 gauge steel
Pipe Roll & Sockets - For up to 3½"
pipe sizes.
Ultimate Load Capacity - Increases
load capacities for DBE and DBR Se-
ries supports.
CLDP10 LOAD DISTRIBUTION PLATE
238 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROOFTOP SUPPORTS
Caddy Pyramid ST Series
Strut-Based Thermoplastic Supports
Fixed Strut Supports
• Provide fixed-height mounting platform 4" or 6" off the roof surface and 10" to 16" of
usable strut length.
• Maximum recommended load is up to 1,500 lbs.
• Hot-dipped galvanized finish provides superior corrosion protection.
Part No. Height L1 L2 Width Wt. Max Rec.
Load*
RPS360400 4" 10" 12.5" 8" 2.95 lbs. 1,000 lbs
RPS360401 6" 10" 12.5" 8" 4.65 lbs. 1,000 lbs
RPS360403 4" 16" 18.5" 8" 4.40 lbs. 1,500 lbs
RPS360404 6" 16" 18.5" 8" 7.05 lbs. 1,000 lbs
* Max. Recommended Load at 10.6 psi roof loading. Contact your project or roofing engineer for maximum allowable
load on individual project roof system
Adjustable Height Strut Supports
• Allow elevation change up to 16" off roof surf, with up to 10" or 16" of usable strut length.
• Maximum recommended load is up to 1,500 lbs.
• Hot-dipped galvanized finish provides superior corrosion protection.
Part No. H1 H2 L1 L2 Width Weight Max Rec.
Load*
RPS360402 4.6" 12" 10" 12.5" 8" 4.30 lbs. 1,000 lbs
RPS360405 5.15" 17" 16" 18.5" 8" 6.00 lbs 1,500 lbs
* Max. Recommended Load at 10.6 psi roof loading. Contact your project or roofing engineer for maximum allowable
load on individual project roof system
239
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ROOFTOP SUPPORTS
Caddy Pyramid RL Series
Strut-Based Thermoplastic Supports
Fixed Roller Supports
• Provide roller capability for up to 6" nominal pipe with 5.5" fixed height.
• Polymeric rollers will not rust, helping to ensure long-lasting performance and smooth
roller action.
• Hit-dipped galvanized finish on steel roller axle, fittings and other hardware provides
superior corrosion protection.
• Supports up to 6" diameter (Nom.) Schedule 40 water-filled steel pipe at maximum spacing
of 10'.
Part No. Nominal
Pipe Dia. H L W Wt. Max Nom. Pipe
Size* Ø
RPS360406 3/4" - 3" 5.5" 12.5" 8" 3.85 lbs. 3"
RPS360401 2" - 6" 5.5" 18.5" 8" 5.20 lbs. 6"
Maximum diameter of Sch. 40 water-filled steel pipe at maximum 10' support spacing
Adjustable-Height Roller Supports
• Can accommodate elevation changes of up to 16" off the roof with up to 6" diameter
(Nom.) pipe.
• Polymeric rollers will not rust, helping to ensure long-lasting performance and smooth
roller action.
• Hit-dipped galvanized finish on steel roller axle, fittings and other hardware provides
superior corrosion protection.
• Supports up to 6" diameter (Nom.) Schedule 40 water-filled steel pipe at maximum spacing
of 10'.
Part No. Nominal
Pipe Dia. H1 H2 L Width Wt. Max Nom. Pipe
Size* Ø
RPS360406 3/4" - 3" 5.5" 12" 12.5" 8" 4.20 lbs. 3"
RPS360401 2" - 6" 5.5" 16" 12.5" 8" 5.95 lbs. 6"
Maximum diameter of Sch. 40 water-filled steel pipe at maximum 10' support spacing
240 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROOFTOP SUPPORTS
Part No. Max. Nom. Pipe or
Conduit Size*
Max Pipe or
Conduit OD H L W Wt. Ultimate Load**
RPSE1H24 1" 1.315" 1-3/4" - 4" 4" 6" 2 lbs. 170 lbs.
RPSE1H57 1" 1.315" 5" - 7" 4" 6" 3.04 lbs. 170 lbs.
RPSE2H46 1" 2.37" 4" - 6" 4" 6" 3.3 lbs 250 lbs.
* Maximum Diameter of Sch. 40 water filled steel pipe at maximum 10' support spacing.
** Ultimate load at 1/4" deflection. Contact project or roofing engineer for maximum allowable load on individual project roof system
Caddy Pyramid EZ Series
Adjustable Height Tool-Free Rooftop Pipe Supports
241
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ROOFTOP SUPPORTS
The simple solution for rooftop support.
Water & Steam
Supports
Gas & Mechanical
Supports
Mechanical Equipment
Supports
Conduit & Condensate Supports
Duct & Cable Tray
Supports
SS-1000-R
Material: Composite base/galvanized
steel/rubber roller
Dimensions: 18” by 12” high
Low Profile Supports /
Multilevel Pipe Supports
Advance Support
Products
CADDY® PYRAMID
Pipe & Equipment Supports
Features
• Dramatically reduces installation time by replac-
ing labor-intensive methods for supporting pipes,
conduits and equipment
• Supports multiple runs of pipe and conduit on roofs
and below raised floors
• Supports concentrated loads up to 600 lbs
• Absorbs shock and vibration
• Protects roof membrane
• Metal cover protects from weather and other envi-
ronmental conditions
• Features an electro-galvanized finish for corrosion
protection
Max.
Part Fig. Working Strut
Number No. Load (lbs) Height Threads Finish Included?
PPRPS25H4 1 25 3-5/8” – – –
PPRPS25H6 1 25 5-5/8” – – –
RPS50H4EG 2 50 4” – EG –
RPS50H6EG 2 50 6” – EG –
RPS50AHSV*2 50 2-1/4” – SV –
RPS150T1 3 150 3-3/16” 3/8”-16 EG NO
RPS150T2 3 150 4” 3/8”-16 EG YES
RPS300T1 4 300 3-3/16” 3/8”-16 EG NO
RPS300T2 4 300 4” 3/8”-16 EG YES
RPS600T2 5 600 4” 3/8”-16 EG YES
CADDY® PYRAMID 25
• Supports up to 25 lb loads
• Lightweight, all-plastic construction
weighs less than 1/3 lb
• Has a small 4” x 5” footprint
• UV-Rated
• Handles up to three 1/2” or two
3/4” or 1” pipes/conduit
• No tools or fasteners needed for
installation
CADDY® PYRAMID 300
• Supports up to 300 lb loads
• Crosslink polyethylene closed-
cell foam supports the additional
weight; 14 gauge steel top plate
CADDY® PYRAMID 150
• Supports up to 150 lb loads
• Has six 3/8”-16 threaded inserts
with captivenuts that allows the
product to be used with standard
pipe clamps and accessories
• Large 16” x 12” footprint distrib-
utes load more evenly than alterna-
tive methods
• Polyethylene closed-cell foam and
• 14 gauge steel construction
• Electro-galvanized (EG) finish on top
plate for added corrosion protection
CADDY® PYRAMID 50
• Supports up to 50 lb loads
• Polyethylene closed-cell foam and
16 gauge steel construction
• The 4” high model has a 10-3/8” x 4”
footprint
• The 6” high model has a 10-3/8” x
4-3/4” footprint
• Electro-galvanized (EG) finish on the
rooftop version and CADDY® COAT
Silver (SV) on the plenum version pro-
vide superior corrosion protection
• Metal top designed to shed water
and minimize water collection on
foam base
CADDY® PYRAMID 600
• Consists of two CADDY PYRAMID
300 bases tied together with a
length of strut
• Footprint is 32” x 12” (24” x 16”
optional with cutting of strut) for
more even load distribution
• Supports up to 600 lb loads
242 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROOFTOP SUPPORTS
Load
Part Dimensions Capacity
No. (strut finish) per Block
PP50H4 10-1/2" L x 4" W x 4" H (PG) 50 lbs.
PP50H6 10-1/2" L x 4" W x 6" H (PG) 50 lbs.
PP150H4 12" L x 12" W x 4" H (PG) 150 lbs.
PP300H4 21-1/2" L x 12" W x 4" H (PG) 300 lbs.
PP50H2AH 10-1/2" L x 4” W x 2” H (CG) 50 lbs.
PP30ELH4 5" L x 4" W x 4" H (HDPE) 30 lbs.
PP50ELH4 10-1/2" L x 4” W x 4” H (HDPE) 50 lbs.
PP50ELH6 10-1/2"" L x 4" W x 6" H (HDPE) 50 lbs.
PIPE PIER® support solution for roof and raised floor applications. Engineered to securely hold pipe,
conduit, cable, and HVAC equipment. PIPE PIER® supports are made of a tough, flexible, roof-friendly
closed-cell polyethylene foam that is UV resistant and practically weatherproof. Its firmness, with a
gentle touch, protects expensive roof membranes even when there is no protective gravel or rock.
Builders, contractors and engineers agree that PIPE PIER® is well constructed, durable, quick and easy
to install, versatile, and cost effective.
Advantages of PIPE PIER®
• Quick and Easy Installation
Only the simplest tools are required for installation; even
long runs or multiple pieces install quickly and precisely.
• PIPE PIER® Ten-Packs are Safer
A lightweight ten-pack weighs only ten pounds and is easily
transported to the roof.
• Versatile
PIPE PIER® support systems can be used in hundreds of
combinations to solve nearly every pipe support need and
allow you to mount breaker and junction boxes safely off
the roof level.
• Cost Effective and Labor Saving
Reductions in maintenance, capital cost, and labor.
• Strut Channel
The galvanized, stainless steel, or High Density Polyethyl-
ene (HDPE) channel accepts readily available strut clamps
and accessories.
• Mechanical Testing
PIPE PIER® meets standards of the American Society for
Testing and Materials (ASTM) to ensure the strength of
each PIPE PIER® component. A sample of each shipment is
independently tested to meet PIPE PIER® specifications.
• Environmental Testing
Atlas Weathering Services Group, in Arizona, has tested
the product for UV resistance, foam degradation, loading
abilities, and horizontal movement.
PIPE PIER® Classic
• Closed-cell, medium density, black
Polyethylene Foam Ethafoam HS 45
• 14 Gauge Galvanized Strut Channel
• Hot melt adhesive-bonding sheet
metal to foam block
The PIPE PIER® 150 and
PIPE PIER® 300
PIPE PIER® support blocks have been
designed and engineered specifically for
rooftop and raised floor applications.
The maximum center loads for the PIPE
PIER® 150 and PIPE PIER® 300 are 150
lbs. and 300 lbs. per support block (re-
spectively). Piping should be attached
using standard strut clamps, rollers, or
other approved accessories. Recom-
mended maximum spacing between
support blocks is 10 feet.
PIPE PIER®
300
PIPE PIER®
150
Plenum Pier®
Stands at a height of 2” and is de-
signed to support pipe, conduit, and
cabling under raised floors with a
maximum 50 pound capacity.
The PIPE PIER® Elite
• 100% recyclable
• Lightweight — saving time and
energy
• Protects — absorbs shock, damp-
ens vibration and provides superior
stability — keeping pipe, conduit
and equipment secure and roof
structures free of damage
• Durable — offers superior temper-
ature resistance and UV protection,
ensuring long-lasting performance
under the harshest conditions.
PP50ELH4
PP30ELH4
PP50H6 PP50H4
PP50H2AH
PG = Pre-galvanized CG = Yellow Dichromate HDPE = High Density Polyethylene
243
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WATER WORKS ITEMS / UNDERGROUND CLAMPS / T-HEAD BOLTS
HS Part No. Black
3/4 x 4 75C400TIB
3/4 x 4 1/2 75C450TIB
Part No.
0UDUL/P
L D TL W H NT F CQ WT
Bolt Bolt Thread Head Head Nut Across Container Wt/C
Part No. Bolt Size Thread Length Diameter Length Width Height Thickness Flats Quantity Pcs.
62C250CTB 5/8 X 2 1/2 5/8-11 2.5 .625 1.25 1.50 .625 625 1.062 400 45
62C300CTB 5/8 x 3 5/8-11 3.0 .625 1.25 1.50 .625 .625 1.062 375 49
62C350CTB 5/8 x 3 1/2 5/8-11 3.5 .625 1.25 1.50 .625 .625 1.062 375 53
75C300CTB 3/4 x 3 3/4-10 3.0 .750 1.75 1.75 .750 .750 1.250 250 79
75C350CTB 3/4 x 3 1/2 3/4-10 3.5 .750 1.75 1.75 .750 .750 1.250 225 84
75C400CTB 3/4 x 4 3/4-10 4.0 .750 1.75 1.75 .750 .750 1.250 200 89
75C450CTB 3/4 x 4 1/2 3/4-10 4.5 .750 1.75 1.75 .750 .750 1.250 175 94
Note: Order Socket Washers Separately By Hole Size
Finishes Available • EG • HDG • SS
Pipe Part No.
Size HS Black
3 3/4 300DSOC
2 3/4 400DSOC
6 3/4 600DSOC
8 3/4 800DSOC
10 3/4 10ISOC
12 3/4 12ISOC
14 1-1/4 14ISOC
16 1-1/4 16ISOC
18 1-1/4 18ISOC
20 1-3/8 20ISOC
24 1-3/8 24ISOC
Pipe Part No. Black
HS Size
3/4 4-12 70DSCW
1 14-24 100DSWD
1-1/4 14-24 125DSWD
1-3/8 14-24 137DSCW
1-1/2 14-24 150DSCW
244 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE FLASHINGS
Part Pipe O.D. Base Dia. Height
Number Description (Inches) (Inches) (Inches)
4001910 Mini 1/4 - 1-1/8 3-1/2 1-3/4
4003910 1 1/4 - 2 4-3/4 3
4004910 2 1-3/4 - 3-1/4 6-1/4 4
4009910 3 1/4 - 4 7-3/4 4
4035910 #3 Silicone
4011910 4 3 - 6 9-1/4 5
4016910 5 4 -7 10-3/4 5
4036910 #5 Silicone
4018910 6 5 - 9 12-1/2 6
4020910 7 6 - 11 14-1/2 6
4025910 8 7 - 13 16-1/2 6
4038910 #8 Silicone
4028910 9 10 - 18 25-3/8 8
4039910 #9 Silicone
4000910 Diverter 16 - 24 39-1/2 x 35 9
Part Size Pipe O.D. Base Dia. Height
Number Number (Inches) (Inches) (Inches)
4029910 801 3/4 - 2-3/4 6-3/10 3-1/2
4030910 802 2 - 7-1/4 10-3/4 5-3/5
4031910 803 3-1/4 - 10 14-1/2 5-4/5
Note: When used on roofs where pitch is steeper than 20 degrees,
or when used on deep ribbed profile roof panel (1-1/2” deep
corrugation or more), consider using next larger size Dektite
that will accommodate the same pipe diameter. Recommended
Sealant: Chemseco Sikaflex® sealant, Part No. 4040910.
INFINITY® Wall Sleeves
Features and Benefits
16 Sizes
(2" - 25" in diameter
Each sleeve comes in lengths of 16" from the factory but
can be cut to the desired length in accordance with the
thickness of the concrete.
Made of HDPE High density polyethylene provides excellent resistance to
acids, alkalies and other organic solvents. Ideal for cathode
protection systems, these non-conductive sleeves will never
rust or corrode. INFINITY® Wall Sleeves can withstand
temperatures up to 150°
Wall / Floor / Ceiling
Innerlynx®
INFINITY®
Wall Sleeve
Carrier Pipe
INFINITY® Locator Caps
come with each sleeve and
attach to the form(s)
2" Water Stop
Call for Technical
Information and
Ordering Specifics
For Best Results —
Use with Innerlynx® Mechanical
Seals. See pages 210 - 211
245
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Tools
Power Tools - Corded . . . .
. . . . . . . . . . . . . 292 - 382
Current Tool . . . . . . 367 - 368
DeWalt. . . . . . . . . . 292 - 355
Milwaukee . . . . . . . 292 - 366
Morse Metal Devil . . . . . . 356
Bosch. . . 318, 320, 325, 328,
340, 342
Greenlee 362 - 366, 377 - 382
Hougen . . . . . . . . . 332 - 333
Ridgid . . . 358, 408-411, 418
Power Tools - Cordless . . .
246 - 289, 395 - 399, 439
Milwaukee . . . . . . . . . 249 - 274
LITHIUM ION - M12 (12 Volt),
M18 (18 Volt), M28 (28 Volt)
DeWalt . . . . . . . . . . . . 246 - 289
LITHIUM ION - 36V NANO,
28V NANO, 18V NANO,
12V MAX
Nicd-XRP - 18V, 14.4V, 12V,
9.6V, 7.2V
Greenlee. . . . . . . . . . . 395 - 399
Ridgid ..................439
Hand Tools / Accessories
Diamond Products 331, 335, 338
Lenox 301, 303 - 304, 307 - 309,
312, 345, 347, 350 - 351, 353
Quick Reference
Hand Tools / Accessories
Milwaukee Test & Measurement
. . . . . . . . . . . . . . 401 - 403
Morse ............. 356
PLS . . . . . . . . . . . 447 - 449
Reed . . . . . . 417, 422, 424
RIDGID . . . . . . . 414 - 416,
. . . . . . . . . 419 - 425, 442
Rothenberger . . . . . . . . 392
Stanley 441 - 449, 444 - 454
Sumner . . . . . . . . 386 - 388
Klein 389 -392, 457
Channel Lock . . . . . . . . 457
Kollmann . . . . . . . . . . . 441
Seekonk . . . . . . . . . . . . 442
Vise-Grip . . . . . . . . . . . 456
Generators / Compressors
DeWalt............. 450
Brand Name Tools &
Accessories
Milwaukee Lenox
DeWalt Stanley
Bosch Sumner
Greenlee Hougen
RIDGID Klein
Reed Channel Lock
Kollmann Rothenberger
Seekonk PLS
Vise-Grip Current Tool
Diamond Products
246 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
36V LI-ION CORDLESS
NANO™ Cordless Tool System
Up to 2-3X the Runtime of 18V
• DeWalt's Heavy-Duty 36V NANO™ Phos-
phate Lithium Ion batteries delivers 2-3X
the runtime of comparable 18V NiCad
batteries.
2,000 Recharges
Lightweight Design
• 2.4 lbs, the same weight as DeWalt 18V NiCad batteries
No Memory & Virtually
No Self-Discharge
• For maximum productivity and
less downtime.
Part No. Description
DC9360 36V NANO™ Replacement Battery
36V Reciprocating Saw Kit
• 4-position keyless blade clamp allows
quick blade change, flush cutting, and
versatility.
• Anti-slip comfort grip for better control.
• 3-position adjustable shoe for adjusting
depth of cut and extends blade life.
• 36V high performance battery pack pro-
vides long run-time and battery life.
• DEWALT® built high power, and high ef-
ficiency motor with electric brake powers
through the toughest applications.
• KIT Includes (1) battery, 1 hour charger,
(1) reciprocating saw blade & impact-
resistant case.
Specifications
Volts: 36 V DC
Strokes per Minute: 0-3,000 SPM
Stroke Length: 1-1/8"
Electric Brake: Yes
Weight: 8.4 lbs.
Part No. Description
DC305K 36V Reciprocating Saw Kit
36V ½" Hammerdrill/
Drill/Driver Kit
• DEWALT® built high power, high efficiency
motor for superior performance in all
drilling and fastening applications.
• 36V high performance battery pack
provides long run-time and battery life.
• Patented 3-speed all-metal transmission
for optimal performance.
• Heavy-duty ½" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength.
• Anti-Slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & impact-resistant case.
Specifications
Volts: 36 V DC
Max. Power: 750 UWO
# of Speed Settings: 3
Max RPM: 0-400/0-1,200/
0-1,600
Max BPM 0-6,800/0-20,400
0-27,200
Weight: 6.9 lbs.
Part No. Description
DC900KL 36V ½" Hammerdrill/Drill/
Driver Kit
36
VOLT
Li-ion
36V 7¼" Circular Saw Kit
• All-metal keyless blade change system for
quick and easy blade changes.
• 0-50° bevel capacity with lever-action
detents at 22.5° and 45° allows for ag-
gressive bevel cuts while allowing users to
locate common angles quickly.
• DEWALT® built, high power, high effi-
ciency motor with electric brake is powerful
enough for the toughest applications.
• High-strength magnesium shoe and upper
guard provides increased durability for
long-term cut accuracy.
• 36V high performance battery pack pro-
vides long run-time & battery life.
• KIT Includes (1) battery, 1 hour charger,
(1) 7¼" carbide-tipped saw blade, rip
fence & impact-resistant case.
Specifications
Volts: 36 V DC
No Load Speed: 4,000 RPM
Bevel Capacity: 0-50 degrees
Arbor Size: 5/8"
Depth of Cut @ 45°: 1-5/8"
Depth of Cut @ 90°: 2-7/16"
Weight: 9.9 lbs.
Part No. Description
DC300K 36V 7¼" Circular Saw Kit
36
VOLT
Li-ion
DC305K
DC900KL
36
VOLT
Li-ion
DC300K
247
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
36V LI-ION CORDLESS
36V 4½" Cut-Off Tool Kit
Specifications
Volts: 36 V DC
No Load Speed: 6,500 RPM
Spindle Thread: 5/8"-11
Wheel Selection: Above 10,000 RPM
Weight: 7.2 lbs.
Part No. Description
DC415KL 36V 4½"cut-Off Tool Kit
• Convenient trigger switch with spindle
lock-off button for easier gripping.
• 2 Position side handle offers greater
comfort and control.
• Quick-change wheel release provides
easier and quicker wheel removal with-
out the need for a wrench.
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing ac-
cess to tight spaces.
• KIT Includes (2) batteries, 1 hour charger,
(1) Type 27 Guard, (1) Type 1 Guard,
Wrench, Matched Flanges, Type 27 Grind-
ing Wheel, Type 1 Cutting Wheel, side
handle & impact-resistant case.
36
VOLT
Li-ion
36V ½" Torque Impact Wrench Kit
• DEWALT® built high power, high efficiency
motor with replaceable brushes delivers
maximum performance in all fastening
applications.
• 36V high performance battery pack
provides long run-time and battery life.
• Preferred rocker switch design for fast
and easy forward and reverse.
• Patented all-metal anvil provides durability
and prevents shearing.
• Anti-slip comfort grip provides increased
comfort and control.
• High speed all-metal transmission delivers
1,400 rpm for increased productivity.
• KIT Includes (2) batteries, 1 hour charger
& impact-resistant case.
Specifications
Volts: 36 V DC
No Load Speed: 1,400 RPM
Impacts per Minute: 2,500 BPM
Max Torque: 3,900 in.-lbs.
325 ft.-lbs.
Weight: 7.5 lbs.
Part No. Description
DC800KL 36V ½" Impact Wrench Kit
36
VOLT
Li-ion
36V 1" SDS Rotary Hammer Kit
• SHOCKS™ Active Vibration Control signifi-
cantly reduces vibration & increases user
comfort & productivity.
• Optimally balanced compact L-shape
design allows access in tight spaces.
• 2.0 ft-lbs impact energy provides corded
power without the cord.
• DEWALT® built high torque, high efficiency
motor delivers maximum performance in
all drilling applications.
• 36V high performance battery pack
provides long run-time & battery life.
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism
for fast penetration & low vibration.
• 360° side handle for better control &
ease of use in tight spaces.
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Specifications
Volts: 36 V DC
No Load Speed: 0-1,150 RPM
Blows per Minute: 0-4,400 BPM
Weight: 7.5 lbs.
Part No. Description
DC233KL 36V 1" SDS Rotary Hammer Kit
DC233KL
36V Jig Saw Kit
• All-metal, lever-action keyless blade change
allows for quick & easy blade changes.
• All-metal keyless shoe bevel with detents
at 0°, 15°, 30° and 45° provides versatility
for easy bevel cutting.
• 4-position orbital action provides control
of aggressiveness of cut and speed.
• Adjustable dust blower keeps line of cut
clear of chips.
• 36V high performance battery pack pro-
vides long run-time & battery life.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (1) battery, 1 hour charger,
(1) jig saw blade & impact-resistant case.
Specifications
Volts: 36 V DC
Strokes per Minute: 0-2,700 SPM
Stroke Length: 1"
Electric Brake: Yes
Weight: 8.4 lbs.
Part No. Description
DC308K 36V Jig Saw Kit
36
VOLT
Li-ion
DC308K
36
VOLT
Li-ion
DC800KL
DC415KL
248 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
36V LI-ION CORDLESS
Two or Four 36V Tools
in one convenient pack!
3 kits to choose from.
4 Tool Combo Kit DCX6401
• DC305 36V Reciprocating Saw
• DC900 ½" HammerDrill/Drill/Driver
• DC300 7¼" Circular Saw
• DC509 36V Flexible Floodlight
• Also Includes: (2) 36V Battery Packs,
360° Side Handle, #2 Phillips Bit,
7¼" Carbide-tipped Saw Blade,
rip fence, reciprocating saw blade,
1-Hour Charger & Kit Box.
Part No. Description
DCX6401 4 Tool Combo Kit
2 Tool Combo Kit DCX6200
• DC900 ½" HammerDrill/Drill/Driver
• DC300 7¼" Circular Saw
• Also Includes: (2) 36V Battery Packs,
360° Side Handle, 7¼" Carbide-tipped
saw blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No. Description
DCX6200 2 Tool Combo Kit
2 Tool Combo Kit DCX6210
• DC900 ½" HammerDrill/Drill/Driver
• DC305 36V Reciprocating Saw
• Also Includes: (2) 36V Battery Packs,
360° Side Handle, reciprocating sa
blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No. Description
DCX6210 2 Tool Combo Kit
DCX6401
36V & 28V Floodlight
• Flex neck design with lockable head clips
allow for hands free use and versatility
to stand or hang light.
• Wide angle beam of light provides more
light than a conventional flashlight.
• Xenon bulb provides extra bright beam
of light.
• 8 hours run-time on a single charge.
Specifications
Volts: 28V & 36 V DC
Bulb: Xenon
Run-Time: 8 hours
Weight: 1.14 lbs.
Part No. Description
DC509 36V Floodlight
DC519 28V Floodlight
Accessories
28V - 36V 1 Hour Charger
• 1-Hr Charging for minimal downtime.
• 3-Stage charging system provides maxi-
mum run-time and extends overall life of
battery.
• Battery fuel gauge indicates how much
charge is left in battery.
• Cord wrap for improved cord storage.
Specifications
Voltage: 28 - 36 V DC
Bulb: Xenon
Compatible With: 28-36V DeWalt
Battery Packs
Weight: 1.9 lbs.
Part No. Description
DC9000 28V-36V Battery Charger
36V Li-Ion Battery Pack
with NANO™ Technology
• Provides high power for corded perfor-
mance.
• Delivers 2-3x more run-time vs. 18V
NiCad batteries.
• Offers long-life and durability - 2000
recharges
• Lightweight design - 2.4 lbs, the same as
DeWalt 18V Nicad battery
• Battery fuel gauge indicates how much
charge is left in battery.
• No memory and virtually no self-dis-
charge.
Specifications
Voltage: 36 V DC
Compatible With: Entire line of DeWalt
36V Tools
Weight: 2.4 lbs.
Part No. Description
DC9360 36V Battery Pack w/NANO™
Technology
DCX6200
DCX6210
DC9360
DC9000
DC509
DC519
36
VOLT
Li-ion
36
VOLT
Li-ion
36
VOLT
Li-ion
36
VOLT
Li-ion
36
VOLT
Li-ion
28
VOLT
Li-ion
Combination Kits with NANO™ Technology
249
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
M28™ LI-ION CORDLESS
Fade-Free Power
• Unlike NiCd batteries,M28 Li-Ion batteries maintain their power
level throughout their entire discharge cycle. The last cut (hole
drilled, etc.) feels as powerful as the first. This mean more pro-
ductivity per battery.
Up to 2X the Runtime of 18V
• Milwaukee's 28 volt, 3.0 Amp-Hr battery
has 2X the runtime of comparable 18V
2.8 Amp-Hr. NiCd packs.
No Memory Effect
• M28 batteries can be recharged at any
time without creating a memory effect, re-
gardless of the pack's current charge level
Compact Li-Ion Power
• Lighter weight than 18V NiCd & NiMH packs..
Longer Pack Life
• The combination of Milwaukee's specialized high power Lithium-
Ion battery cells and their performance optimizing circuit, pro-
vides up to 2½ times more lifetime work output when compared
today's 18V NiCd.
Latches Quickly
and Easily Release
the Battery
Rubber Foot Provides
Impact Protection and
Prevents Sliding on
Slick Surfaces
Performance Optimizing
Circuit Maintains Cell Balance
and Prolongs Battery Life
Battery Fuel Gauge Shows
How Much Charge Is
Left - No More Guessing
Which Battery is Fully
Charged
Heavy-Duty Construction
Withstands Up To 10' Drop
Part No. Description
48-11-2830 V28 Replacement Battery
Lithium-Ion
1/2" Hammer Driver/Drill
• Heavy-duty 2-speed gear box.
• Metal Hammer Selector.
• ½" Metal Ratcheting Chuck with carbide jaws for superior grip-
ping strength.
• Reversible Battery Pack allows users to change tool balance for
overhead work or to fit in tight places.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries, 1 hour charger, side handle, Phillips bit,
and case.
Specifications
Volts: 28 Volts DC / 3.0 Amp-Hrs.
No Load RPM: Low 0-600 / High 0-1800
No Load BPM: Low 0-9,000 / High 0-27,000
Torque: 750 in-lbs.
Weight: 6.7 lbs. w/battery / 4.4 lbs w/o battery
Part No. Description
0726-24 M28 1/2" Hammer Driver/Drill Kit
0726-20 M28 1/2" Hammer Driver/Drill Tool Only
Lithium-Ion
Sawzall® Reciprocating Saw
• Feels and cuts like a corded saw.
• Exclusive Gear Protecting Clutch for long life.
• Rugged metal Quik-Lok® Blade Clamp and Adjustable Shoe for
fast, tool-free blade changes and adjustments.
• High/Low Speed Selector Switch with Lock.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries, 1 hour charger, (2) Sawzall® blades,
and impact-resistant case.
Specifications
Volts: 28 Volts DC / 3.0 Amp-Hrs.
Stroke Length: 1-1/8"
Strokes Per Minute: Low 0-2,000 / High 0-3,000
Length: 18 in.
Weight: 9.1 lbs. w/battery / 6.8 lbs w/o battery
Part No. Description
0719-22 M28 Sawzall Reciprocating Saw Kit
0719-20 M28 Sawzall Reciprocating Saw Tool Only
0719-22
0726-22
250 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
M28™ LI-ION CORDLESS
Lithium-Ion
7/16" Quick-Change Impact Wrench
• Variable speed control.
• Magnesium Gearcase for added durability and lighter weight.
• Reversible Battery Pack allows users to change tool balance for
overhead work or to fit in tight places.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available as TOOL ONLY. Batteries and charger sold seperately
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
Max. Torque: 325 ft.-lbs. / 3900 in.-lbs.
No Load RPM: 0-1,450
Impacts per Minute: 0-2,450
Weight: 7.6 lbs w/o battery
Part No. Description
0799-20 M28 7⁄16" Quick-Change Impact Wrench Tool Only
Lithium-Ion ½" Right Angle Drill
• Head swivels 360° - Can be locked in any position.
• Heavy-duty gear box.
• Comfortable two-finger variable speed control with easy to
reach forward/reverse lever.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY (Incl. side handle & chuck key).
• KIT Includes (1) battery, 1 hour charger, side handle, chuck key
and impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
No Load RPM: 0-1000 High / 0-400 Low
Max Torque: 0-1081 in.-lbs. Low Gear
Weight: 10.9 lbs. w/battery / 8.6 lbs w/o battery
Part No. Description
0721-21 M28 ½" Right Angle Drill Kit
0721-20 M28 ½" Right Angle Drill Tool Only
Lithium-Ion
1" Compact SDS Rotary Hammer
• 3 modes of operation - Hammer Drill / Drill / Chipping.
• Compact L-Shaped design. Only 11-1/8" from grip to chuck for
easy access to tight spaces.
• Heavy-duty metal gear box and block construction.
• Keyless SDS chuck for fast, tool-free bit changes.
• Variable speed trigger & reverse switch for accurate drill bit starting &
easy bit/fastener removal.
• Comfortable, Non-Slip Soft-Grip reduces vibration and fatigue.
• Available in KIT or TOOL ONLY (incl. side handle & depth guage).
• KIT Includes (2) batteries, 1 hour charger, side handle, depth
guage and impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
No Load RPM: 0-1400
No Load BPM: 4700
Impact Energy: 2.1 ft.-lbs.
Weight: 9.6 lbs. w/battery / 7.3 lbs w/o battery
Part No. Description
0756-22 M28 1" Compact SDS Rotary Hammer Kit
0756-20 M28 1" Compact SDS Rotary Hammer Tool Only
0779-22
Lithium-Ion
1/2" Square Drive
Impact Wrench
• Flat Head Detent Pin for secure
socket .retention. (Also includes
round head pin).
• Magnesium Gearcase for added
durability and lighter weight.
• Reversible Battery Pack allows users
to change tool balance for overhead
work or to fit in tight places.
• Hanger Bracket with solid steel ring.
• Comfortable, Non-Slip Soft-Grip
reduces vibration and fatigue.
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries, 1 hour charger and impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
Max. Torque: 325 ft.-lbs. / 3900 in.-lbs.
No Load RPM: 0-1,450
Impacts perMinute: 0-2,450
Weight: 8.9 lbs. w/battery / 6.6 lbs w/o battery
Part No. Description
0779-22 M28 1/2" Impact Wrench Kit
0779-20 M28 1/2" Impact Wrench Tool Only
0721-22
0756-22
0799-20
251
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
M28™ LI-ION CORDLESS
Lithium-Ion
Wood Cutting Circular Saw
• Lightweight aircraft aluminum shoe and
magnesium upper and lower Guards
reduce fatigue and are rugged enough
for the job site.
• 50° bevel capacity easily adjusts for a
wide range of cuts.
• Electric brake stops blade in less than 2
seconds for fast, repetitive cuts..
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (Includes
1-24T Blade, Wrench & Rip Fence).
• KIT Includes 1-24T Blade, Wrench, Rip
Fence, (2) batteries, 1 hour charger and
impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
Blade Size: 6¼"
No Load RPM: 4,200
Weight: 8.9 lbs. w/battery
7.1 lbs w/o battery
Part No. Description
0730-22 M28 6-1/4" Circular Saw Kit
0730-20 M28 6-1/4" Circular Saw Tool
Only
Lithium-Ion
Metal Cutting Circular Saw
• Lightweight aircraft aluminum shoe and
magnesium upper and lower Guards
reduce fatigue and are rugged enough
for the job site.
• Large, impact-resistant window for clear
line of sight.
• Electric brake for quick blade stops.
• LED light for greater cutting visibility.
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (In-
cludes 1-36T Blade, Wrench, Rip Fence
& Safety Glasses).
• KIT Includes 1-36T Blade, Wrench, Rip
Fence, Safety Glasses, (2) batteries, 1
hour charger and impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
Blade Size: 6¼"
No Load RPM: 4,200
Weight: 8.9 lbs. w/battery
7.1 lbs w/o battery
Part No. Description
0740-22 M28 6¼" Circular Saw Kit
0740-20 M28 6¼" Circular Saw Tool
Only
Lithium-Ion Portable Deep
Cut Band Saw
• Over 200 cuts of 1" conduit per battery
charge.
• Deep 4¾" x 4¾" cutting capacity. Cuts
as fast as the corded version.
• High/Low speed selector switch with lock.
• Two-finger trigger speed control.
• Blade tightening Lever provides quick
and easy blade changes.
• LED light for greater cutting visibility.
• Comfortable, Non-Slip Soft-Grip reduces
vibration and fatigue.
• Available in KIT or TOOL ONLY (Includes
1-14TPI Blade).
• KIT Includes 1-14TPI Blade, (1) battery,
1 hour charger and impact-resistant case.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
No Load SFPM: High 0-350 / Low 0-225
Weight: 19.6 lbs. w/battery
17.3 lbs w/o battery
Part No. Description
0729-21 M28 Band Saw Kit
0729-20 M28 Band Saw Tool Only
0730-22 0740-22
0729-21
Lithium-Ion
Grinder/Cut-Off Tool
• 28V™ motor delivers 8000 RPM no load speed
• Overload protection for preventing over-heating
• Soft start reduces start-up torque and improves gear life
• Large spindle lock for quick wheel replacement
• Tool free guard provides easy guard adjustment
• Slide on switch reduces user fatigue
• Fuel gauge indicates remaining run time
• Available in KIT or TOOL ONLY).
• KIT Includes (1) battery, 1 hour charger, spanner wrench,
(1) Type 1 metal cut-off wheel, (1) Type 27 metal grinding wheel
and contractor bag.
Specifications
Volts: 28 V DC / 3.0 Amp-Hrs.
No Load RPM: 0-1000 High / 0-400 Low
Max Torque: 0-1081 in.-lbs. Low Gear
Weight: 10.9 lbs. w/battery / 8.6 lbs w/o battery
Part No. Description
0725-21 M28 Grinder/Cut-Off Tool
0725-20 M28 Grinder/Cut-Off Tool Only
0725-21
252 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
M28™ LI-ION CORDLESS
Universal Li-Ion/Ni-Cad 18V &
28V Charger
• Compatable with ALL Milwaukee 18-28V
Li-Ion/NiCad Batteries.
Part No. Description
48-59-2818 M28 Universal Li-Ion/Ni-
Cad 18V/28V Charger
Combination Kits
• Three M28 Tools or Four M28 Tools in one convenient pack!
3 Tool Combo Kit 0928-23
• 0719-20 V28™ Sawzall® Recip Saw
• 0724-20 V28™ ½" Hammer Driver/Drill
• 49-24-0185 V28™ Work Light
• Also Includes: (2) V28™ Battery Packs,
Clip-Lok™ System, Side Handle, #2
Phillips Bit, 2-Pack Sawzall®
Blades, 1-Hour Lithium-Ion Charger
and Contractor's Bag.
Part No. Description
0928-23 M28 3-Tool Combo Kit
4 Tool Combo Kit 0928-29
• 0719-20 V28™ Sawzall® Recip Saw
• 0724-20 V28™ ½" Hammer Driver/Drill
• 0730-20 V28™ 6½" Circular Saw
• 49-24-0185 V28™ Work Light
• Also Includes: (2) V28™ Battery Packs,
Clip-Lok™ System, Side Handle, #2
Phillips Bit, 6½" 24T Carbide-tipped
Blade, Rip Fence, 2-Pack Sawzall®
Blades, 1-Hour Lithium-Ion Charger
and Contractor's Bag.
Part No. Description
0928-29 M28 4-Tool Combo Kit Kit
0928-29
0928-23
28V Li-Ion Battery Pack
• Delivers 2x the run-time vs. 18V NiCad
batteries.
• No memory effect irregardless of the
pack's current charge level.
• Lighter weight than 18V NiCd & NiMH packs.
• Provides up to 2½ times more lifetime
work output when compared today's 18V
NiCd.
• Battery fuel gauge indicates how much
charge is left in battery.
• Fade-free power, V28 Li-Ion batteries
maintain their power level throughout
their entire discharge cycle.
Specifications
Voltage: 28 V DC, 3.0 Amp-hr
Compatible With: Milwaukee V28 Tools
Weight: 2.4 lbs.
Part No. Description
48-11-2830 M28 Replacement Bat-
tery
Multi-Bay Charger for All Slide-On
Nicd, V18/V28 Li-Ion Batteries
• Smart charger for use with Milwaukee
V28 LITHIUM-ION, V18 LITHIUM-ION
and NiCd batteries.
• Convenient built-in cord wrap also acts as
shock absorber.
• High visibility LED for charge status
indication.
Part No. Description
48-59-0280 Multi-Bay Charger
Worklight
• Clip-Lok™ system ready.
• 140° pivoting head.
Part No. Description
49-24-0185 M28 Li-Ion Work Light
Combination Kits
Accessories
Jobsite
Radio
• AM/FM Tuner with
Digital Processor
• Premium speakers
and 40 watt amplifier
• Weather sealed auxiliary compartment - Pro-
tects MP3 players and other audio devices
• ABS polymer and steel construction
• Equalizer and 10-station presets
• AC/DC Versatility - Powered by Milwau-
kee M12™, M18™, V18™, M28™ , NiCd
12V to 28V, and AC outlet
• Built-in bottle opener
• 12V DC Output - Charges most small
electronic devices
Part No. Description
2790-20 M18 Jobsite Radio
253
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
28V NANO™ LI-ION CORDLESS
NANO™ Cordless Tool System
28V ½" Hammerdrill/
Drill/Driver Kit
• DEWALT® built high power, high efficiency
motor for superior performance in all
drilling and fastening applications.
• 28V high performance battery pack
provides long run-time and battery life.
• Patented 3-speed all-metal transmission
for optimal performance.
• Heavy-duty ½" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength.
• Anti-Slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & impact-resistant case.
Specifications
Volts: 28 V DC
Max. Power: 650 UWO
# of Speed Settings: 3
Max RPM: 0-400/0-1,200/
0-1,600
Max BPM 0-6,800/0-20,400
0-27,200
Clutch Settings: 22
Weight: 6.9 lbs.
Part No. Description
DC910KL 28V 1/2" Hammerdrill/Drill/
Driver Kit
28
VOLT
Li-ion
DC910KL
28V Recirocating Saw Kit
• 1-1/8" stroke length and 0-3,000 spm for
fast cutting.
• 28V high performance battery pack
provides long run-time and battery life.
• 4-position keyless blade clamp allows
quick blade change, flush cutting, and
versatility.
• 3-position adjustable shoe for adjusting
depth of cut and extends blade life.
• DeWalt built high power, and high ef-
ficiency motor with electric brake powers
through the toughest applications
• Anti-slip comfort grip for better control.
• KIT Includes (1) battery, 1 hour charger,
reciprocating saw blade & impact-resistant
case.
Specifications
Volts: 28 V DC
Strokes per Minute: 0-3,000 spm
Stroke Length: 1-1/8"
Electric Brake: Yes
Keyless Blade Clamp: Yes
Weight: 8.0 lbs.
Part No. Description
DC315K 28V Reciprocating Saw Kit
28
VOLT
Li-ion
DC315K
28V 6-1/2" Circular Saw Kit
• 6-1/2" carbide tipped blade for cutting
common materials at 90° and 45°.
• 28V high performance battery pack
provides long run-time and battery life.
• 3,850 RPM for fast rip cuts & cross cuts.
• 0-50° bevel capacity allows for aggressive
bevel cuts for a multitude of applications.
• High strength magnesium shoe and up-
per guard provides increased durability
for long-term cut accuracy.
`• Fan-cooled motor with replaceable brush-
es for maximum power and durability
• Anti-slip comfort grip for better control.
• KIT Includes (1) battery, 1 hour charger,
16T Carbide Saw Blade, Rip fence &
impact-resistant case.
Specifications
Volts: 28 V DC
No Load Speed: 3850 rpm
Blade Diameter: 6-1/2"
Bevel Capacity: 0-50°
Keyless Blade Clamp: Yes
Weight: 8.0 lbs.
Part No. Description
DC310K 28V 6-1/2" Circular Saw Kit
28
VOLT
Li-ion
DC310K
Up to 50% More Runtime than
18V NiCad
• DeWalt's Heavy-Duty 28V NANO™ Phos-
phate Lithium Ion batteries delivers 50%
more runtime vs. 18V NiCad batteries.
2,000 Recharges
Lightweight Design
• 2.0 lbs, the same weight as DeWalt 14.4V NiCad batteries
No Memory & Virtually
No Self-Discharge
• For maximum productivity and
less downtime.
Part No. Description
DC9280 28V NANO™ Replacement Battery
DC9000 28V-36V 1 Hour Charger
254 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
28V LI-ION CORDLESS
NANO™ Cordless Tool System
28V 4½" Cut-Off Tool Kit
Specifications
Volts: 28 V DC
No Load Speed: 6,500 RPM
Spindle Thread: 5/8"-11
Wheel Selection: Above 10,000 RPM
Weight: 7.2 lbs.
Part No. Description
DC413KL 28V 4½"cut-Off Tool Kit
• Convenient trigger switch with lock-off
button for easier gripping.
• 2 Position side handle offers greater
comfort and control.
• Quick-change wheel release provides
easier and quicker wheel removal with-
out the need for a wrench.
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing ac-
cess to tight spaces.
• KIT Includes (2) batteries, 1 hour charger,
(1) Type 27 Guard, (1) Type 1 Guard,
Wrench, Matched Flanges, Type 27 Grind-
ing Wheel, Type 1 Cutting Wheel, side
handle & impact-resistant case.
28V
1" SDS Rotary Hammer Kit
• SHOCKS™ Active Vibration Control signifi-
cantly reduces vibration & increases user
comfort & productivity.
• Optimally balanced compact L-shape
design allows access in tight spaces.
• 2.0 ft-lbs impact energy provides corded
power without the cord.
• DEWALT® built high torque, high efficiency
motor delivers maximum performance in
all drilling applications.
• 28V high performance battery pack
provides long run-time & battery life.
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism
for fast penetration & low vibration.
• 360° side handle for better control &
ease of use in tight spaces.
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Specifications
Volts: 28 V DC
No Load Speed: 0-1,150 RPM
Blows per Minute: 0-4,400 BPM
Weight: 7.6 lbs.
Part No. Description
DC228KL 28V 1" SDS Rotary Hammer Kit
28
VOLT
Li-ion
DC228KL
28
VOLT
Li-ion
28V Jig Saw Kit
• All-metal, lever-action keyless blade change
allows for quick & easy blade changes.
• All-metal keyless shoe bevel with detents
at 0°, 15°, 30° and 45° provides versatility
for easy bevel cutting.
• 4-position orbital action provides control
of aggressiveness of cut and speed.
• Adjustable dust blower keeps line of cut
clear of chips.
• 28V high performance battery pack pro-
vides long run-time & battery life.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (1) battery, 1 hour charger,
(1) jig saw blade & impact-resistant case.
Specifications
Volts: 28 V DC
Strokes per Minute: 0-2,700 SPM
Stroke Length: 1"
Electric Brake: Yes
Weight: 7.2 lbs.
Part No. Description
DC318K 28V Jig Saw Kit
DC318K
28
VOLT
Li-ion
28V
1/2" Torque Impact Wrench Kit
• Heavy-duty impact mechanism delivers su-
perior torque for heavy-duty applications.
• Heavy-duty all-metal anvil provides dura-
bility and prevents shearing.
• High speed all-metal transmission delivers
2,400 rpm for increased productivity.
• High power, high efficiency motor deliv-
ers maximum performance in all fasten-
ing applications.
• Variable speed reversible switch pro-
vides full-range control for both setting
and removing fasteners.
• Electric brake allows for precise setting
of fasteners.
• DeWalt exclusive NANO™-phosphate
lithium ion cells offer long battery life &
durability.
• Anti-slip comfort grip provides increased
comfort and control.
• KIT Includes (2) batteries, 1 hour char-
ger & impact-resistant case.
Specifications
Volts: 28 V DC
No Load Speed: 2,400 RPM
Impacts per Minute: 3,000 BPM
Max Torque: 1,920 in.-lbs.
160 ft.-lbs.
Weight: 5.0 lbs.
Part No. Description
DC810KL 28V 1/2" Impact Wrench Kit
DC810KL
28
VOLT
Li-ion
DC413KL
255
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
28V LI-ION CORDLESS
Combination Kits with NANO™ Technology
Combination Kits with
NANO™ Technology
• Two 28V Tools or Four 28V Tools in
one convenient pack! Three kits to
choose from.
2 Tool Combo Kit DCX5200
• DC910KL ½" HammerDrill/Drill/Driver
• DC310K 6½" Circular Saw
• Also Includes: (2) 28V Battery Packs,
360° Side Handle, 6½" Carbide-tipped
saw blade, rip fence, 1-Hour Charger
& Contractor's Bag.
Part No. Description
DCX5200 28V - 2 Tool Combo Kit
2 Tool Combo Kit DCX5210
• DC910KL ½" HammerDrill/Drill/Driver
• DC305 Reciprocating Saw
• Also Includes: (2) 28V Battery Packs,
360° Side Handle, reciprocating saw
blade, 1-Hour Charger
& Contractor's Bag.
Part No. Description
DCX5210 28V - 2 Tool Combo Kit
4 Tool Combo Kit DCX5401
• DC315K Reciprocating Saw
• DC910KL ½" HammerDrill/Drill/Driver
• DC310K 6½" Circular Saw
• DC599 Flexible Floodlight
• Also Includes: (2) 28V Battery Packs,
360° Side Handle, #2 Phillips Bit,
6½" Carbide-tipped Saw Blade,
rip fence, reciprocating saw blade,
1-Hour Charger & Kit Box.
Part No. Description
DCX5401 28V - 4 Tool Combo Kit
28
VOLT
Li-ion
28
VOLT
Li-ion
DCX5401
DCX5200
DCX5210
36V & 28V Floodlight
• Flex neck design with lockable head clips
allow for hands free use and versatility
to stand or hang light.
• Wide angle beam of light provides more
light than a conventional flashlight.
• Xenon bulb provides extra bright beam
of light.
• 8 hours run-time on a single charge.
Specifications
Volts: 28V & 36 V DC
Bulb: Xenon
Run-Time: 8 hours
Weight: 1.14 lbs.
Part No. Description
DC509 36V Floodlight
DC519 28V Floodlight
Accessories
28V Battery Pack with
NANO™ Technology
• Provides high power for corded perfor-
mance.
• Up to 50% more run-time vs. 18V NiCad
batteries.
• Offers long-life and durability - 2000
recharges
• Lightweight design - 2.0 lbs, the same as
DeWalt 14.4V NiCd battery
• Battery fuel gauge indicates how much
charge is left in battery.
• No memory and virtually no self-dis-
charge.
Specifications
Voltage: 28 V DC
Compatible With: Entire line of DeWalt
28V Tools
Weight: 2.0 lbs.
Part No. Description
DC9280 28V Battery Pack w/NANO™
Technology
DC9280
DC509
DC519
36
VOLT
Li-ion
28
VOLT
Li-ion
28
VOLT
Li-ion
28V - 36V 1 Hour Charger
• 1-Hr Charging for minimal downtime.
• 3-Stage charging system provides maxi-
mum run-time and extends overall life of
battery.
• Battery fuel gauge indicates how much
charge is left in battery.
• Cord wrap for improved cord storage.
Specifications
Voltage: 28 - 36 V DC
Bulb: Xenon
Compatible With: 28-36V DeWalt
Battery Packs
Weight: 1.9 lbs.
Part No. Description
DC9000 28V-36V Battery Charger
DC9000
28
VOLT
Li-ion
36
VOLT
Li-ion
256 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V LI-ION CORDLESS
Increased Run-Time
• Milwaukee's 18 volt, M18 XC High Capacity
Lithium-Ion battery features increased runtime
with 40% less weight than an 18V NiCd battery.
No Memory Effect
• M18 batteries can be recharged at any time
without creating a memory effect, regardless of the
pack's current charge level
Milwaukee Digital Power Management
• Overload Protection - Prevents user from
damaging their cordless power tool investment
in abusive situations.
• Temperature Management System - Keeps
battery in ideal temperature range to provide
maximum life.
• Individual Cell Voltage Monitoring - Ensures
optimal charge and discharge for maximum life.
• Discharge Protection - Prevents cell damage
from over-discharge
Part No. Description
48-11-1828 M18 XC Replacement Battery
Digital Power Management
provides Overload Protection,
Temperature Management,
Individual Cell Voltage
Monitoring and Discharge
Protection
Battery Fuel Gauge displays
remaining run-time
5-year/2000 Charge Warranty
M18™ XC High Capacity Lithium-Ion Battery
M18™ Compact Lithium-Ion Battery
Digital Power Management
provides Overload Protection,
Temperature Management,
Individual Cell Voltage
Monitoring and Discharge
Protection
Battery Fuel Gauge displays
remaining run-time
2-Year Warranty
Equivalent run-time with 40% less
weight than an 18V NiCad battery
Part No. Description
48-11-1815 M18 Compact Replacement Battery
18V Li-Ion 1/2" Hammer Drill/Driver
• 4-Pole frameless motor: Delivers 550 in-lbs of peak torque, 0-450/0-1,700
RPM, & 29,000 BPM.
• Compact & Ergonomic Design: 8-1/2" Length.
• DPM - Digital Power Management: Overload protection prevents damage
to the tool and battery in abusive situations.
• All Metal Gear Case: The only metal gear case in its class.
• All Metal 1/2" Single Sleeve Ratcheting Chuck: Provides maximum durabil-
ity and bit retention
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries (available with either High Capacity XC or
Compact Li-Ion batteries, 1 hour charger, and Kitbox.
Specifications
Volts: 18 Volts DC
No Load RPM: 0-450 / 0-1700
No Load BPM: 0-29,000
Torque: 550 in-lbs.
Weight: 4.9 lbs. w/battery / 4.4 lbs w/o battery
Part No. Description
2602-22 M18 1/2" Hammer Drill/Driver Kit w/ XC Battery
2602-22CT M18 1/2" Hammer Drill/Driver Kit w/ Compact Battery
2602-20 M18 1/2" Hammer Drill/Driver, Tool Only
2602-22
257
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V LI-ION CORDLESS
18V Li-Ion 1/2" Hammer Drill/Driver
• Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time
• ½" single-sleeve ratcheting metal chuck with carbide jaws
• On-board Battery Fuel Gauge displays remaining run-time
• Built-in LED Light illuminates work surface
• Variable speed trigger
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger, side handle and carrying case.
Specifications
Volts: 18 Volts DC
No Load RPM: 0-450 / 0-1800
No Load BPM: 0-28,000
Torque: 650 in-lbs.
Weight: 5.3 lbs. w/battery
Part No. Description
2611-24 M18 High Performance 1/2" Hammer Drill/Driver Kit
2611-20 M18 High Performance 1/2" Hammer Drill/Driver, Tool Only
2611-24
18V Li-Ion 1/2" Drill/Driver
• Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time
• ½" single-sleeve ratcheting metal chuck with carbide jaws
• On-board Battery Fuel Gauge displays remaining run-time
• Built-in LED Light illuminates work surface
• Variable speed trigger
• Available in KIT or TOOL ONLY.
• KIT Includes (2) batteries, 1 hour charger, side handle and carrying case.
Specifications
Volts: 18 Volts DC
No Load RPM: 0-450 / 0-1800
No Load BPM: 0-28,000
Torque: 650 in-lbs.
Clutch Settings: 24
Weight: 5.3 lbs. w/battery
Part No. Description
2610-24 M18 1/2" High PErformance Drill/Driver Kit
2610-20 M18 1/2" High Performance Drill/Driver, Tool Only
2610-24
18V Li-Ion Compact 1/2" Driver Drill
• 1/2 in. Ratcheting Chuck with plastic sleeve
• Heavy-Duty 2-Speed Metal Gear Box: 0-350/0-1,400 rpm
• Compact Length (7-3/4 in.) fits in tight areas
• Compact Motor delivers 400 in.-lbs. of maximum torque
• Built-in LED light illuminates work surfaces
• Available in KIT or TOOL ONLY.
• KIT Includes (1) Compact battery, 1 hour charger, keyless chuck and carrying case.
Specifications
Volts: 18 Volts DC Clutch Settings: 21
No Load RPM: 0-350 / 0-1400 Capacity in Steel: 1/2"
No Load BPM: 0-28,000 Capacity in Wood: 1"
Torque: 400 in-lbs. Weight: 4.0 lbs. w/battery
Part No. Description
2601-22 M18 1/2" Compact Driver Drill Kit
2601-20 M18 1/2" Compact Driver Drill, Tool Only
2601-22
COMPACT
258 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V LI-ION CORDLESS
18V Li-Ion 1/2" High Torque Impact Wrench with Friction Ring
• Delivers 450 ft- lbs of torque
• Compact Size/Light Weight: 8-7/8” length and 6.7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 1/2” Anvil w/Friction Ring: Provides quick and easy, one-handed socket changes
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts: 18 Volts DC Anvil Size: 1/2" Square
No Load RPM: 0-19,000 Anvil Type: Friction Ring
No Load IPM: 0-2,200 Weight: 6.7 lbs. w/battery
Torque: 450 ft-lbs.
Part No. Description
2663-22 M18 1/2" High Torque Impact Wrench Kit
2663-20 M18 1/2" High Torque Impact Wrench, Tool Only
2663-22
18V Li-Ion 3/4" High Torque Impact Wrench with Friction Ring
• Delivers 525 ft- lbs of torque
• Compact Size/Light Weight: 9” length and 6.8 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 3/4” Anvil w/Friction Ring: Provides quick and easy, one-handed socket changes
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts: 18 Volts DC Anvil Size: 3/4" Square
No Load RPM: 0-19,000 Anvil Type: Friction Ring
No Load IPM: 0-2,200 Weight: 6.7 lbs. w/battery
Torque: 525 ft.-lbs.
Part No. Description
2664-22 M18 3/4" High Torque Impact Wrench Kit
2664-20 M18 3/4" High Torque Impact Wrench, Tool Only
2664-22
18V Li-Ion 7/16" Hex High Torque Impact Wrench
• Delivers 350 ft- lbs of torque
• Compact Size/Light Weight: 9-1/2” length and 7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 7/16” Hex Chuck: Provides quick and easy accessory changes
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts: 18 Volts DC Anvil Size: 7/16" hex
No Load RPM: 0-19,000 Anvil Type: hex Chuck
No Load IPM: 0-2,200 Weight: 6.7 lbs. w/battery
Torque: 350 ft.-lbs.
Part No. Description
2665-22 M18 7/16" Hex High Torque Impact Wrench Kit
2665-20 M18 7/16" Hex High Torque Impact Wrench, Tool Only
2665-22
259
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V LI-ION CORDLESS
18V Li-Ion 1/2" High Torque Impact Wrench with Detent Pin
• Delivers 450 ft- lbs of torque
• Compact Size/Light Weight: 8-7/8” length and 6.7 lbs
• 4-Pole frameless motor: Delivers maximum run-time
• 1/2” Anvil w/Pin Detent: Provides maximum socket retention
• Available in KIT or TOOL ONLY.
• KIT Includes (2) XC batteries, 1 hour charger and kit box.
Specifications
Volts: 18 Volts DC Anvil Size: 1/2" Square
No Load RPM: 0-19,000 Anvil Type: Detent Pin
No Load IPM: 0-2,200 Weight: 6.7 lbs. w/battery
Torque: 450 ft-lbs.
Part No. Description
2662-22 M18 1/2" High Torque Impact Wrench Kit
2662-20 M18 1/2" High Torque Impact Wrench, Tool Only
2662-22
18V Li-Ion Cordless 3/8" Compact Impact Wrench
• Milwaukee Designed Impact Mechanism: maximum application speed
• Milwaukee 4-Pole Frameless Motor: maximum efficiency and run-time
• 3/8" Friction Ring: allows quick socket changes
• Built-In LED Light: illuminates work surface
• Belt clip allows for easy portability.
• Available in KIT or TOOL ONLY.
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip & carrying case.
Specifications
Volts: 18 Volts DC Anvil Size: 3/8"
No Load RPM: 0-2,200 Anvil Type: Friction Ring
No Load IPM: 0-3,200 Weight: 4.1 lbs. w/battery
Torque: 2,000 in-lbs.
Part No. Description
2651-22 M18 3/8" Compact Impact Wrench Kit
2651-20 M18 3/8" Compact Impact Wrench, Tool Only
2651-22
18V Li-Ion Cordless 1/2" Compact Impact Wrench
• Milwaukee Designed Impact Mechanism: maximum application speed
• Milwaukee 4-Pole Frameless Motor: maximum efficiency and run-time
• 1/2" Detent Pin: provides positive bit retention
• Built-In LED Light: illuminates work surface
• Belt clip allows for easy portability.
• Available in KIT or TOOL ONLY.
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip & carrying case.
Specifications
Volts: 18 Volts DC Anvil Size: 1/2"
No Load RPM: 0-2,200 Anvil Type: Detent Pin
No Load IPM: 0-3,200 Weight: 4.1 lbs. w/battery
Torque: 2,200 in-lbs.
Part No. Description
2652-22 M18 1/2" Compact Impact Wrench Kit
2652-20 M18 1/2" Compact Impact Wrench, Tool Only 2652-22
COMPACT
COMPACT
260 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V LI-ION CORDLESS
18V Li-Ion 1/4" Hex Compact Impact Driver
• ¼" Hex quick change allows for easy bit changes.
• Milwaukee designed impact mechanism provides faster application speed.
• 4-Pole Frameless Motor maximizes tool efficiency to increase run-time.
• On-board battery fuel gauge displays remaining run-time.
• Built-in LED Light illuminates work surface
• Variable speed trigger.
• Belt clip allows for easy portability.
• Also available with (2) 18V Li-Ion Compact Batteries
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, belt clip, & carrying case.
Specifications
Volts: 18 Volts DC Torque: 1400 in-lbs.
No Load RPM: 0-2,200 Anvil Type: 1/4" Hex
No Load IPM: 0-3,200 Weight: 3.5 lbs. w/battery
Part No. Description
2650-22 M18 1/4" Hex Impact Driver Kit, with XC High Capacity Battery
2650-21 M18 1/4" Hex Impact Driver Kit, with Compact Battery
2650-20 M18 1/4" Hex Impact Driver, Tool Only
2650-22
18V Li-Ion
Sawzall® Reciprocating Saw Kit
• Patented Gear-Protecting Clutch extends the life of the tool.
• Lever Action QUIK-LOK™ Blade Clamp.
• On-board battery fuel gauge displays remaining run-time.
• Built-in LED Light illuminates work surface
• Variable speed trigger.
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, (1) General
Purpose Sawzall® blade, & carrying case.
Specifications
Volts: 18 V DC
Strokes per Minute: 0-3,200 SPM
Stroke Length: 1"
Overall Length: 17-3/4"
Tool Weight: 18.3 lbs.
Part No. Description
2620-22 M18 Sawzall® Recip Saw Kit
2620-20 M18 Sawzall® Recip Saw, Tool Only
18V Li-Ion 4-1/2" Grinder/Cut-Off Tool
• 4-Pole Motor- Delivers maximum power when cutting or grinding
• Overload Protection - Prevents damage to the tool and battery
in abusive situations
• Debris Baffles - Keeps debris from entering the tool and damag-
ing the internal components to help increase tool life.
• Tool Free, Burst Resistant Guard - Quick, easy guard adjustments.
• Paddle Switch Design - The only cordless cut-off /grinder in the
market with a paddle switch design
• Up to 35% faster cutting speed
• Up to 50% more cuts on a single charge
• 3-Position Side Handle - Provides optimal control and versatility
• KIT Includes (2) 18V XC Li-Ion batteries, 18V charger, Type 1
Guard, Type 27 Guard, Type 1 Cut-Off wheel, Spanner Wrench,
Side handle & Contractor bag.
Specifications
Volts: 18 Volts DC Spindle Lock: Yes
RPM's: 9,000 Switch Type: Paddle
Handle Positions: 3 Weight: 5.9 lbs. w/battery
Part No. Description
2680-22 M18 4-1/2" Grinder / Cut-Off Tool Kit
2680-20 M18 4-1/2" Grinder / Cut-Off Tool, Tool Only
2680-22
2620-22
COMPACT
261
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V LI-ION CORDLESS
18V Li-Ion
6-1/2" Circular Saw Kit
• Heavy-Duty Magnesium Guards for maxi-
mum durability.
• Ergonomic, compact and lightweight
design with soft-grip handle for operator
comfort.
• Electronic brake stops blade quickly.
• On-board battery fuel gauge displays
remaining run-time.
• Aircraft aluminum shoe provides greater
accuracy.
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger & contractor bag.
Specifications
Volts: 18 V DC
Speed: 3,500 RPM
Capacity: 2-1/8" @ 90°,
1-5/8" @ 45°
Arbor: 5/8"
Blade: 6-1/2" 24T
Carbide Tipped
Trigger: Lock-off
Tool Weight: 8.5 lbs.
Part No. Description
2630-22 M18 6-1/2" Circular Saw Kit
2630-20 M18 6-1/2" Circular Saw,
Tool Only
2630-22
18V Li-Ion Jig Saw Kit
• Quik-Lok™ blade clamp - Provides fast
and easy keyless blade change.
• Tool-free shoe bevel allows for a maxi-
mum 45° bevel in either direction with
detents at 0°, 15°, 30°, and 45°.
• Position Orbital Cutting - most versatility
for application specific cutting than any
cordless jig saw on the market.
• Over-Molded Grip with variable speed
trigger
• Non-Marring Shoe
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger , Jig-saw blade, non-marring
shoe & carrying case.
Specifications
Volts: 18 V DC
Strokes per minute: 2,200 SPM
Stroke length: 1"
Bevel Capacity: 45 degree
Orbital Settings: 5
Tool Weight: 7.75 lbs.
Part No. Description
2645-22 M18 Jig Saw Kit
2645-20 M18 Jig Saw, Tool Only
2645-22
18V Li-Ion Compact
Bandsaw Kit
• 45% Lighter than Deep Cut – 10.25 Lbs
compact light weight design for cutting
overhead and in tight places.
• 3-1/4” Cut Capacity – cuts most common
materials for Electrician, Plumber and
Mechanical cutting applications. Single
pass cut on 3” copper, 3” angle iron,
2-1/2” conduit.
• Tool-Free Adjustable Material Shoe –
quickly adjusts the shoe and allows flush
cuts when working with installed materials
against walls and ceilings.
• LED Work Light – illuminates the cut line
in dark areas.
• Blade Ejection System – Quickly change
the blade by moving the material guide
into the up position and depressing the
blade ejection button.
• Drop Resistant Pulley Guard –
Engineered geometries & high impact
polymer.
• Cast Aluminum Gear Case – Withstands
jobsite abuse & maintains gear positioning.
• KIT Includes (2) 18V XC Li-Ion batteries,
18V charger, Blade, & case.
Specifications
Volts: 18 V DC
SFPM: 480
No Load Speed 480
Loaded Speed 390
Max Capacity: 3-1/4"
Blade Length: 35-3/8"
Tool Weight: 10.25 lbs.
Part No. Description
2629-22 M18 Compact Band Saw Kit
2629-20 M18 Compact Band Saw,
Tool Only
18V Li-Ion Wet/Dry Vacuum
• Works on all Milwaukee 18V slide-on batteries, LITHIUM-ION or NiCd
• Powerful motor to provide strong suction and air flow
• Tool box style – easy transport and storage
• Reusable wet/dry filter for both wet and dry applications
• KIT Includes Filter Assembly, Crevice Tool,Wide Utility Nozzle, Wireless Vinyl Hose,
Battery Pack & Charger NOT INCLUDED.
0880-20 Specifications
Volts: 18 V DC
Material: Wet or Dry
Capacity: 2 Gallon
Max Air Flow: 45 cu. ft./min
Sealed Suction in Water: 32 in.
Tool Weight: 9.4 lbs.
Part No. Description
0880-20 18V Wet/Dry Vacuum Kit
2629-22
262 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V LI-ION CORDLESS
Combination Kits
KIT COMPONENTS
2-Tools 2-Tools 2-Tools 3-Tools 3-Tools 4-Tools 4-Tools 4-Tools 4-Tools
2690-22 2691-22 2693-22 2691-23 2696-23 2690-24 2691-24 2692-24 2694-24
2601-20
M18 1/2" Compact
Drill Driver
2602-20
M18 1/2" Hammer
Drill Driver
2611-20
M18 High Performance
Hammer Drill-Driver
(Includes Side-Handle)
2620-20
M18 SAWZALL®
Recip Saw
(Incl. G.P. SAWZALL® Blade)
2630-20
M18 6-1/2" Circular Saw
(Includes 6-1/2" Blade
& Rip Fence)
2650-20
M18 1/4" Hex Compact
Impact Driver
2651-20
M18 3/4" Compact
Impact Wrench
2663-20
M18 1/2" High Torque
Impact Wrench
49-24-0171
M18 Work Light
ACCESSORIES INCLUDED:
(2) 48-11-1828
M18 XC High Capacity
Lithium-Ion Batteries
(2) 48-11-1815
M18 Compact
Lithium-Ion Batteries
48-59-1801
1-Hour Charger
Contractor Bag
Carrying Case
263
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V LI-ION CORDLESS
Accessories
49-24-0171
18V Li-Ion Worklight
• Ergonomic, compact, and lightweight
design for operator comfort
• Fold-away utility hook
• 135 degree rotating head
Part No. Description
49-24-0171 M18 Worklight
18V XC High Capacity
Li-Ion Battery
• Increased run-time with 40% less weight
than an 18V NiCd battery
• Milwaukee Digital Power Management
Overload Protection - Prevents user
from damaging their cordless power tool
investment in abusive situations
• Temperature Management System -
Keeps battery in ideal temperature range
to provide maximum life
• Individual Cell Voltage Monitoring -
Ensures optimal charge and discharge
for maximum life
• Discharge Protection - Prevents cell
damage from over-discharge
• Battery Fuel Gauge - Displays remaining
run-time
• 5-year 2,000 Charge Warranty
Part No. Description
48-11-1828 M18 18V XC High Capacity
Lithium-Ion Battery
49-11-1828
18V Compact Li-Ion Battery
• Equivalent run-time with 40% less weight
than an 18V NiCad battery
• Milwaukee Digital Power Management
Overload Protection - Prevents user
from damaging their cordless power tool
investment in abusive situations
• Temperature Management System -
Keeps battery in ideal temperature range
to provide maximum life
• Individual Cell Voltage Monitoring -
Ensures optimal charge and discharge
for maximum life
• Discharge Protection - Prevents cell
damage from over-discharge
• Battery Fuel Gauge - Displays remaining
run-time
• 2-year Warranty
Part No. Description
48-11-1815 M18 18V Compact
Lithium-Ion Battery
49-11-1815
18V Li-Ion Battery Charger
• 1-Hour Charger
• Pass-through plug design for added
outlet availability
• 5-Year Warranty
Part No. Description
48-59-1801 M18 18V Lithium-Ion Battery
Charger
2710-20 M18 AC/DC Wall & Vehicle
18V Lithium-Ion Battery
Charger
48-59-1801
18V Li-Ion LED Worklight
• Ergonomic, compact, and lightweight
design for operator comfort
• Fold-away utility hook
• 135 degree rotating head
Part No. Description
2735-20 M18 LED Worklight
Jobsite Radio
• AM/FM Tuner with Digital Processor -
Delivers highest reception accuracy and
signal clarity
• Premium speakers and 40 watt amplifier
• Weather sealed auxiliary compartment
- Protects MP3 players and other audio
devices
• Shock absorbing ABS polymer and steel
construction protects against weather
and abusive job site conditions
• Equalizer and 10-station presets
• AC/DC Versatility - Powered by Milwau-
kee M12™, M18™, V18™, V28® , NiCd
12V to 28V, and AC outlet
• Built-in bottle opener
• 12V DC Output - Provides power to
charge most small electronic devices
Part No. Description
2790-20 M18 Jobsite Radio
2790-20
2735-20
264 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V LI-ION CORDLESS
2,000 Recharges
Part No. Description
DC9180 18V NANO™ Replacement Battery
Compatable with ALL DeWalt 18V Tools
No Memory & Virtually
No Self-Discharge
• For maximum productivity and
less downtime.
Lightweight Design
• 1.5 lbs, the same weight as DeWalt 12V
NiCad batteries
Li-Ion Cordless Tool Systems
18V XRP™
1/2" Hammerdrill/Drill/Driver Kit
• Patented 3-speed, all-metal transmission.
• Heavy-duty 1/2" self-tightening chuck.
• LED worklight provides better visibility.
• Best in class length for improved bal-
ance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
Specifications
Volts: 18 V DC
Max. Power: 425 UWO
# of Speed Settings: 3
Max RPM: 0-500/0-1,250/
0-2,000
Max BPM 0-8,500/0-21,250
0-24,000
Clutch Settings: 22
Weight: 5.25 lbs.
Part No. Description
DCD970KL 18V 1/2" Hammerdrill/Drill/
Driver Kit
18
VOLT
Li-ion
DCD970KL
18V XRP™
1/2" Hammerdrill/Drill/Driver Kit
• Patented 3-speed, all-metal transmission.
• Heavy-duty 1/2" self-tightening chuck.
• LED worklight provides better visibility.
• Best in class length for improved bal-
ance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
Specifications
Volts: 18 V DC
Max. Power: 450 UWO
# of Speed Settings: 3
Max RPM: 0-500/0-1,250/
0-2,000
Max BPM 0-8,500/0-21,250
0-34,000
Clutch Settings: 22
Weight: 6.25 lbs.
Part No. Description
DCD950KX 18V 1/2" Hammerdrill/Drill/
Driver Kit
DCD950B Bare Tool Only
18V Compact
1/2" Hammerdrill Kit
• Lightweight design minimizes user fatigue
• Dual speed range 0-500/0-1700 rpm and
0-8,500/0-29,000 bpm
• Compact Li-Ion batteries (DC9181) are
compatible with the existing system of
DEWALT 18V power tools
• LED worklight provides increased visibility
in confined spaces
• KIT Includes (2) Compact batteries, 30
minute charger, & hard case.
Specifications
Volts: 18 V DC
Max. Power: 350 UWO
# of Speed Settings: 2
Max RPM: 0-500/0-1,700/
Max BPM 0-8,500/0-29,000
Clutch Settings: 17
Weight: 4.1 lbs.
Part No. Description
DCD775KL 18V 1/2" Hammerdrill Kit
DCD775B Bare Tool Only
18
VOLT
Li-ion
DCD775KL
DCD950KX
COMPACT
18
VOLT
NiCd
265
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V XRP™
1/4" Impact Driver Kit
• Compact size & weight.
• Textured ant-slip comfort grip.
• Durable magnesium gear case and
all metal transmission.
• DeWalt exclusive NANO™-
phosphate lithium ion cells offer
long battery life & durability.
• KIT Includes (2) batteries, 1 hour
charger & hard case.
Specifications
Volts: 18 V DC
No Load Speed: 2,400 RPM
Impacts per Minute: 2,700 IPM
Max Torque: 1,330 in.-lbs.
Weight: 3.7 lbs.
Part No. Description
DC827KL 18V 1/4" Impact Driver Kit
18
VOLT
Li-ion
DC827KL
18V LI-ION CORDLESS
Li-Ion Cordless Tool Systems
18V XRP™ 1/2" Impact Wrench Kit
• Frameless motor for extended tool
durability and life
• Durable magnesium gear case and
all metal transmission
• Compact size & weight.
• Replaceable brushes for increased
serviceability
• Textured anti-slip comfort grip.
• Heavy duty impacting mechanism
directs torque to fastener without
kickback
• KIT Includes (2) batteries, 1 hour
charger & hard case.
Specifications
Volts: 18 V DC
No Load Speed: 2,400 RPM
Impacts per Minute: 2,700 IPM
Max Torque: 1,740 in.-lbs.
145 ft.-lbs
Weight: 3.7 lbs.
Part No. Description
DC822KL 18V Li-Ion Cordless XRP™ 1/2" Impact Wrench Kit
18
VOLT
Li-ion
DC822KL
18V Compact
1/2" Drill/Driver Kit
• Lightweight design minimizes user fatigue
• Dual speed range 0-500/0-1700 rpm and
0-8,500/0-29,000 bpm
• Compact Li-Ion batteries are compatible
with all DeWalt 18V power tools
• LED worklight provides increased visibility
• Compact size fits into tight spaces
• KIT Includes (2) Compact batteries, 30
minute charger, & hard case.
Specifications
Volts: 18 V DC
Max. Power: 350 UWO
# of Speed Settings: 2
Max RPM: 0-500/0-1,700/
Max BPM 0-8,500/0-29,000
Clutch Settings: 17
Weight: 4 lbs.
Part No. Description
DCD760KL 18V 1/2" Drill Driver Kit
DCD760B Bare Tool Only
DCD760KL
18
VOLT
Li-ion
COMPACT
18V XRP™
1/2" Drill/Driver Kit
• Patented 3-speed all-metal transmission
• Heavy-duty 1/2" ratcheting chuck
• LED worklight provides increased visibility
• High power, high efficiency motor delivers
450 unit watts out of max power
• Improved balance and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle & hard case.
Specifications
Volts: 18 V DC
Max. Power: 350 UWO
# of Speed Settings: 2
Max RPM: 0-500/0-1,700/
Max BPM 0-8,500/0-29,000
Clutch Settings: 17
Weight: 4.1 lbs.
Part No. Description
DCD960KL 18V 1/2" Drill/Driver Kit
18
VOLT
Li-ion
DCD960KL
18V XRP™ Compact
1/4" Impact Driver
• Frameless motor for extended tool dura-
bility and life
• Replaceable brushes.
• Textured anti-slip comfort grip
• Durable magnesium gear case and all
metal transmission.
• Heavy-duty impacting mechanism directs
torque to fastener without kickback.
• KIT Includes (2) compact Li-Ion batteries, 30
minute charger & hard case
Specifications
Volts: 18 V DC
No Load Speed: 0-2,400 rpm
Impacts/Min: 0-2,700 ipm
Max. Torque: 1,330 in.-lbs.
Weight: 3.1 lbs.
Part No. Description
DCF826KL 18V XRP™ Compact
Li-Ion 1/4" Impact Driver
COMPACT
18
VOLT
Li-ion
DCF826KL
266 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
7.2V - 18V NiCad/NiMH/
Li-Ion Charger
• Charges all DeWalt
7.2V - 18V Batteries
• 3-Stage Charging
System.
Part No. Description
DC9310 7.2V - 18V Battery Charger
DC9180C 18V Battery / 1 Hour Charger
Combo Kit
DC9319 7.2V - 18V Vehicle Battery
Charger
18V LI-ION CORDLESS
18V XRP™ Li-Ion
6¾" Metal Cutting Circular Saw Kit
• 6¾", 40-tooth carbide tipped blade cuts
up to 2" conduit and pipe in one pass.
• All metal upper and lower guards for
maximum durability.
• Multi-coated SIGHT-LINE™ window for
maximum abrasion resistance.
• Stainless-steel shoe stays rust free while
minimizing chip build-up which prevents
marring of the cutting surface.
• ULTRA SIGHT-LINE™ Scope allows maximum
visibility to the cut line.
• KIT Includes (2) batteries, 1 hour charger,
40 tooth titanium carbide saw blade, &
impact-resistant case.
Specifications
Volts: 18 V DC
No Load Speed: 3,100 rpm
Blade Diameter: 6¾"
Bevel Capacity: N/A
Arbor Size: 20mm
Depth of Cut: 2
3 ⁄
8"
Weight: 8.5 lbs.
Part No. Description
DCS934KL 18V 6¾" Metal Cutting
Circular Saw Kit
DW934B Bare Tool Only
DCS934KL
18
VOLT
Li-ion
18
VOLT
NiCd
DCG411KL
18V XRP™ Li-Ion
4½" Cut-Off Tool Kit
• 6,500 rpm provides high power for cut-
ting and grinding applications
• Convenient trigger switch with lock-off
button for easier gripping
• 2-position side handle offers greater
comfort and control
• Quick-change wheel release provides
easier and quicker wheel removal with-
out the need for a wrench
• Jam-pot, low profile gear case provides
precise gear alignment for a smoother,
quieter transmission while allowing ac-
cess to tight spaces
• KIT Includes (2) batteries, 1 hour charger,
Type 27 & Type 1 guards, 2 matched
flanges, wrench, Type 27 wheel, 2-position
side handle & contractors bag.
Specifications
Volts: 18 V DC
No Load Speed: 6,500 rpm
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Min. Wheel RPM: 10,000 rpm
Weight: 6.25 lbs.
Part No. Description
DCG411KL 18V 4½" Cut-Off Tool Kit
DC411B Bare Tool Only
DCS385L
18V XRP™ Li-Ion Reciprocating
Saw Kit
• 4-position blade clamp allows for flush
cutting and increased versatility.
• Lever-action keyless blade clamp.
• Anti-slip comfort grip.
• Pivoting adjustable shoe with open top.
• Variable speed with trigger lock.
• KIT Includes (1) battery, 1 hr. charger,
reciprocating saw blade & hard case
Specifications
Volts: 18 V DC
Strokes/min: 0-3,000 spm
Stroke length: 11 ⁄
8"
Electric Brake: Yes
Weight: 7.25 lbs.
Part No. Description
DCS385L 18V XRP™ Li-Ion Reciprocating
Saw Kit
DC385B Bare Tool Only
18
VOLT
Li-ion
Li-Ion Cordless Tool Systems
18V Accessories
18V
Nano™ Li-Ion
Battery
• Compatible with all
DeWalt 18V tools.
• No memory and
virtually no self-
discharge.
• Lightweight design, 1.5 lbs., the same
weight as DeWalt 12V NiCad batteries.
Part No. Description
DC9180 18V NANO™ Li-ion Battery
DC9180C 18V Battery / 1 Hour Charger
Combo Kit
Compact
18V Nano™ Li-Ion
Battery
• Compatible with all
DeWalt 18V tools.
• No memory and virtu-
ally no self-discharge.
• Lightweight design, 1.5 lbs., the same
weight as DeWalt 12V NiCad batteries.
Part No. Description
DC9181 Compact 18V NANO™ Li-ion
Battery
267
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V LI-ION CORDLESS
Combination Kits
KIT COMPONENTS
2-Tools 2-Tools 2-Tools 2-Tools 4-Tools 4-Tools 6-Tools
DCK
266L
DCK
265L
DCK
271L
DCK
275L
DCK
470L
DCK
475L
DCK
675L
DCD970 18V XRP™ Li-Ion
1/2" Hammerdrill / Drill / Driver
DCD775 18V XRP™ Li-Ion
Compact 1/2" Hammerdrill / Drill / Driver
DCD760 18V XRP™ Li-Ion
Compact 1/2" Drill / Driver
DCD827 18V XRP™ Li-Ion
1/4" Impact Driver
DCF826 18V XRP™ Li-Ion
1/2" Impact Driver
DC385 18V XRP™ Li-Ion
Reciprocating Saw
DC411 18V XRP™ Li-Ion
4-1/2" Cut-Off Tool
DW059 18V XRP™ Li-Ion
1/2" Impact Wrench
DC390 18V XRP™ Li-Ion
6-1/2" Circular Saw
DW919 18V
Flexible Floodlight
ACCESSORIES INCLUDED:
DC9180 18V XRP™ Li-Ion
Batteries (2)
DC9181 18V XRP™ Li-Ion
Compact Batteries (2)
DC9310 7.2V - 18V 60-Minute
Li-Ion/NiCad/NiMH Charger
DC931 7.2V - 18V 30-Minute
Li-Ion/NiCad/NiMH Charger (Compact)
Contractor's Bag (Soft-Sided)
Tool Case (Hard-Sided)
268 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V LI-ION CORDLESS
Part No. Description
48-11-2401 12V M12 Replacement Battery
48-11-2402 12V M12 XC High Capacity
Replacement Battery
No Memory & Virtually No
Self-Discharge
• Longer run-time with fade-free power
Lightweight Design
• Only 0.4 lbs. and 50% smaller than
"compact" NiCad batteries.
Up To 65% Lighter vs. "compact" NiCad Batteries
NEW XC High Capacity
12V Lithium-Ion
• 2X the Run-Time vs. Original
M12 Battery
Compact
• 2-1/2" W x 3-1/2" L
• Provides a durable
and stable base for
tools to stand up-
right.
Replace Your Hand Tools with Li-Ion Power!
2450-22
12V Li-Ion 1/4" Hex
Impact Driver
• Quick Bit-Loading for bit insertion and
release with one hand.
• Battery Fuel Gauge displays remaining
run-time.
• Built-in LED for illumination.
• Variable Speed Trigger
• KIT Includes (2) Batteries, Charger and
impact-resistant Carrying Case.
2450-22 Specifications
Volts: 12 V DC
No Load Speed: 0-2000 RPM
Impacts per Minute: 0-3000 IPM
Torque: 850 in.-lbs.
Chuck Type: 1/4", Hex
Tool Length 6-1/2"
Tool Weight (w/battery): 2.3 lbs.
Part No. Description
2450-22 12V Cordless Li-Ion 1/4"
Hex Impact Driver Kit
2450-20 1/4" Hex Impact Driver,
Bare Tool Only
2410-22
12V Li-Ion 3/8" Drill Driver
• 2-Speed, all-metal gear box.
• Powerful motor, up to 25% more torque.
• Ratcheting single metal sleeve chuck for
better bit retention.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
2410-22 Specifications
Volts: 12 V DC
No Load Speed (RPM): 0-400/0-1,500
Impacts per Minute: 0-3000 IPM
Torque: 250 in.-lbs.
Chuck Type: 3/8"
Tool Length 7-3/8"
Tool Weight (w/battery): 2.5 lbs.
Part No. Description
2410-22 12V Cordless Li-Ion
3/8" Drill Driver Kit
2410-20 3/8" Drill Driver,
Bare Tool Only
2451-22
12V Li-Ion 3/8" Square
Drive Impact Wrench w/Ring
• Powerful Impact Mechanism - Up to
1,000 in.-lbs. of torque.
• Easy socket insertion/release.
• Lightweight & compact
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger and
Carrying Case.
2451-22 Specifications
Volts: 12 V DC
No Load Speed: 0-2,200 RPM
Impacts per Minute: 0-3000 IPM
Torque: 1000 in.-lbs.
Anvil Type: 3/8" Square
Tool Length 6-1/2"
Tool Weight (w/battery): 2.3 lbs.
Part No. Description
2451-22 12V Cordless Li-Ion 3/8"
Square Drive Impact Wrench w/Ring Kit
2451-20 3/8" Square Drive Impact
Wrench w/Ring Bare Tool Only
48-11-2402
269
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
12V LI-ION CORDLESS
2401-22
12V Li-Ion Copper Tubing Cutter
• Close quarter rotating cutting head cuts pipe in confined spaces.
• Automatic adjustment from 3/8" - 1" tubing.
• Auto locking mechanism, Ultra-efficient drive mechanism deliv-
ers over 200 cuts per charge.
• Water resistant metal cutter head.
• Ergonomic, compact, and lightweight design for operator comfort.
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger & Carrying Case.
2471-22 Specifications
Volts: 12 V DC
Trigger: Cut, Reset to open
Speed: 500 RPM
Capacity: 1/2" - 1-1/8" O.D.
Blade: Copper Cutting
Tool Length 14"
Tool Weight (w/battery): 3.2 lbs.
Part No. Description
2471-22 M12 Copper Tubing Cutter Kit, 2 Batteries
2471-21 M12 Copper Tubing Cutter Kit, 1 Battery Only
2471-20 M12 Copper Tubing Cutter, Tool Only
Replacement Copper
Cutting Wheels
• Includes 2 replacement cutting
wheels for the M12 12V Copper Tub-
ing Cutter.
Part No. Description
48-38-0010 Replacement Copper Cutting Wheels, 2/pack
2471-21
12V Li-Ion Screwdriver
• Quick Bit-Loading 1/4 in. Hex Chuck for one-handed operation
• Metal Gear Housing for job site durability
• Variable Speed Trigger for output power control
• Over-mold side and grip
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger, #2 Phillips ¼" Hex Insert Bit,
& Storage Bag.
2401-22 Specifications
Volts: 12 V DC Capacity in Steel: 1/4"
No Load Speed: 0-500 RPM Capacity in Wood: 1/2"
Torque: 150 in.-lbs. Tool Length 7"
Chuck Type: 1/4" Hex Tool Weight (w/battery): 2 lbs.
Clutch Settings: 14 + 1
Part No. Description
2401-22 12V Cordless Li-Ion Screwdriver
2401-20 Screwdriver, Bare Tool Only
12V Li-Ion
No-Hub Driver
With specific torque settings
for 60 and 80 in/lbs, the M12™
Cordless No-Hub Driver is
specifically designed to quickly
install no-hub couplings with
accuracy and repeatability. The
2455-22 can fasten up to 300
clamps on a single charge and
is proven to be accurate for
up to 25,000 clamps before
re-calibration.
• Specific Torque Settings
for 60 and 80 in-lbs - Fast
accurate installation of no-hub couplings
• Auto Shut-Off w/ LED Indicator - Alerts users that torque limit
has been achieved
• LED Calibration Indicator - Alerts user when calibration is
needed (25,000 cycles)
• 0-750 RPM Drill Mode - for general drilling and fastening
• Fastens up to 300 steel clamps on a single charge
• Compact/Lightweight Design
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger, (3) Shockwave Sockets, &
Carrying Case.
2455-22 Specifications
Volts: 12 V DC
No Load Speed: 0-250 / 0-750 RPM
Torque: 60 in.-lbs. & 80 in-lbs.
Chuck Type: 1/4" Hex
Tool Weight (w/battery): 2.75 lbs.
Part No. Description
2455-22 12V Cordless Li-Ion No-Hub Driver
2455-20 Screwdriver, Bare Tool Only
2455-22
270 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V LI-ION CORDLESS
Hackzall® Reciprocating Saw Blades
Designed to maximize the cutting performance of the new M12
HACKZALL™ Reciprocating Saw, these blades feature a thin kerf
design that reduces the amount of drag and resistance while cutting,
resulting in more cuts per battery charge. Specialized blades are
available for a variety of HVAC, electrical, plumbing and mainte-
nance/repair applications. Includes 5 blades (except where noted).
Part No. Application
48-00-5400 Fiberglass
48-00-5460 Wood
48-00-5461 Plaster
48-00-5410 Multi-Material
48-00-5310 Wood - Scroll
48-00-5324 Metal - Scroll
48-00-5414 PVC - 4"
48-00-5614 PVC - 6"
48-00-5424 Duct
48-00-5418 EMT
12V Li-Ion Hackzall™ Reciprocating Saw
• Keyless QUIK-LOK™ Blade Clamp allows for quick and easy
blade changes.
• All-metal gear case for added durability.
• Accepts both HACKZALL™ and SAWZALL® style blades.
• Built-in Fuel Gauge & LED for illumination.
• Variable Speed Trigger
• KIT Includes (2) HACKZALL™ Blades, (2) Batteries, Charger and
impact-resistant Carrying Case.
2420-22 Specifications
Volts: 12 V DC
No Load Speed: 0-3000 RPM
Stroke Length: 1/2"
Blade Clamp: Quik-Lok™ Universal 1/2" Tang
Trigger: Variable Speed
Tool Length 11"
Tool Weight (w/battery): 2.6 lbs.
Part No. Description
2420-22 12V Cordless Li-Ion M12 Hackzall™ Recip Saw Kit
2420-20 M12 Hackzall™ Recip Saw, Tool Only
2420-22
12V Li-Ion 3/8" Right Angle Drill Driver
• 3/8'' Single sleeve Ratcheting Chuck
• 3-3/4'' Head Length
• Extended Paddle Switch
• Electronic Clutch - 11 Settings plus drill
mode for complete control
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes Battery, Charger, & Soft
Carrying Case.
Specifications
Volts: 12 V DC
No Load Speed: 0-800 RPM
Torque: 100 in.-lbs.
Chuck Type: 3/8" Hex
Clutch Settings: 11 + 1
Head: 3-3/4"
Tool Length 11.75"
Tool Weight (w/battery): 2.43 lbs.
Part No. Description
2415-21 12V Li-Ion 3/8" Right Angel
Drill Driver Kit
2415-20 12V Li-Ion 3/8" Right Angel
Drill Driver, Bare Tool ONLY
2415-21 12V Li-Ion PVC
Shear
• Powerful Mechanism - Cuts
up to 2" schedule 40 PVC in 3
seconds
• Ultra Sharp Blade with Pierce
Point - No burrs or shavings to
remove
• Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall
• Quick Return Blade - Increased productivity during repetitive cuts
• Stainless Steel Blade and Aluminum Jaw - Impact, water and
rust resistant
• Variable Speed Trigger - Controlled cut in warm or cold weather
• KIT Includes Battery, Charger, & Carrying Case.
2470-21 Specifications
Volts: 12 V DC Blade: 3mm S/S
Capacity: 2-3/8" O.D. Tool Length 14-3/8"
Torque: 1,900 in.-lbs. Tool Weight (w/battery): 4.7 lbs.
Trigger: Variable
Part No. Description
2470-21 12V Li-Ion PVC Shear Kit
2470-20 12V Li-Ion PVC Shear, Bare Tool ONLY
2470-21
271
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
12V LI-ION CORDLESS
12V Li-Ion M-Spector™
Digital Inspection Cameras
• Crystal clear, 2.4" high-resolution, color
display.
• Exclusive image zoom (2X) and LED
brightness control.
• Durable, detachable, 3' water-tight flex-
ible cable and a small camera head fits
through holes as small as 3/4".
• Extension camera cables available to
extend reach of camera.
• One-handed operation.
• 15 hour run-time.
• Also available in 4-AA battery configuration
or tool only.
• KIT Includes 3' Camera Cable, Battery,
Charger and Carrying Case.
2310-22 Specifications
Volts: 12 V DC
LCD Display: 2.4" Hi-Res Color
Camera Head Dia.: 0.7" (17mm)
Image Zoom: 2X
LED Brightness Adjust: (3X) Control
Cable Length 3'
Part No. Description
2310-21 M-Spector™ Digital Camera Kit
2300-20 M-Spector™ Digital Camera Kit
4-AA Batteries, (does not in-
clude 12V Battery or Charger)
2310 / 2300 Accessories
Part No. Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0115 Replacement Camera Cable
2310-21
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for auto-
motive applications.
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommend-
ed maximum extension is 19')
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
2311-21 Specifications
Volts: 12 V DC
LCD Display: 3.5" Hi-Res Color
Camera Head Dia.: 0.7" (17 mm)
Adj. Image Zoom: 4X
LED Brightness Adjust: (4X) Control
Cable Length 3'
Part No. Description
2311-21 M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
2312-21 M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
2311 Accessories
Part No. Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
2311-21
12V Li-Ion SUB-SCANNER™
Detection Tool Kit
A heavy duty pistol grip detection tool
for professional, commercial and indus-
trial applications. Detects rebar up to 6"
deep in concrete, as well as the location
and depth of materials beneath gypsum,
OSB, ceramic tile and marble. Four wheel
design for durability and smooth, accurate
measurement.
FEATURES:
• Measures depth and location of rebar up
to 6” through concrete
• Detects location of wood, PEX, PVC, and
metal
• Differentiates between steel (ferrous) and
copper or aluminum (non-ferrous) metals
• Embedded AC voltage detection to iden-
tify the location of live wires
• Intuitive user interface displays stud
centers and edges
• High contrast white on black display and
backlight for easy reading
• Rugged over-molding improves durability
and user grip
• Auto-calibration for all surfaces
• KIT Includes Battery, Charger &
Carrying Case.
2290-21 Specifications
Volts: 12 V DC
Detection depths of various materials:
Wood/Metal Stud: 1-1/2 inches
Plastic: 3 inches
Ferrous Metal: 6"
Non-Ferrous Metal: 6"
Position Accuracy:
Wood: 1/4"
Non-Ferrous: 1/2"
Ferrous: 1/2"
Scan for AC Electrical: Yes
Display Resolution: 0.5"
Backlight: Yes
Non-Contact Voltage: Yes
Indication: Visual (for NCVD)
Part No. Description
2290-21 Detection Tool Kit
2290-20 Detection Tool, Tool Only
2290-21
Rechargeable Test and Measurement Instruments
272 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V LI-ION CORDLESS
Rechargeable Test and Measurement Instruments
12V Li-Ion 2-Beam Plumb
Laser Kit
A self leveling mechanism that ensures an
accurate auto plumb up to 1/4" at 100 ft.,
and an out-of-level indicator blinks when the
leveling range exceeds four degrees.
FEATURES:
• Self-Leveling • Out-of-Level Indicator
• Magnetic • Low Battery Indicator
2320-21
• KIT Includes Battery, Charger & Carrying Case
2320-21 Specifications
Volts: 12V
Accuracy: 1/4'' @ 100'
Leveling Range: +- 4 Degrees
Laser Power: <1mW
Laser Wave Length: 635 nm
Part No. Description
2320-21 Cordless 12V 2-Beam Plumb Laser Kit
2320-20 Cordless 12V 2-Beam Plumb Laser, Tool Only
12V Li-Ion
Clamp Meters
A True-RMS current tester for pro-
fessional commercial and industrial
applications. The clamp meters feature
an ergonomic pistol grip design greatly
increasing comfort and ease-of-use
in overhead applications. The units
also provide wide 1.30 or 1.57" jaw
openings to easily handle very large
conductors, a thin jaw profile for access
to tight spaces, a large white on black
display, embedded non-contact voltage
detection, and embedded extra bright
LED floodlight.
HVAC/R CLAMP-GUN™ Clamp Meter Kit 2238-21
• Large jaw size of 1.30" measuring up to 750 MCM cable
• CAT IV 600V / CAT III 1000V for greater safety
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(Dual Banana), Carrying Case and Manual
2238-21 Specifications
TRMS: YES Voltage AC/DC: 1000V
Safety Rating: CAT IV 600V/ Contact Temp: -40° F to 1000°F
CAT III 1000V Resistance: 600 kOhms
Current AC: 600A LED Light: YES
Microamps: 600µA
Part No. Description
2238-21 12V Li-Ion HVAC/R Clamp Meter Kit
2238-20 12V Li-Ion HVAC/R Clamp Meter, Bare Tool ONLY
CLAMP-GUN™ Clamp Meter Kit 2239-21
• Extra-large jaw size of 1.57" measuring up to 1000 MCM cable
• In-rush current measurement for motor starts
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Carrying Case,
and Manual
2239-21 Specifications
TRMS: YES Voltage AC/DC: 1000V
Safety Rating: CAT IV 600V/ Contact Temp: -40° F to 1022°F
CAT III 1000V Resistance: 600 kOhms
In-Rush Current: 100mS LED Light: YES
Part No. Description
2239-21 12V Li-Ion Clamp Meter Kit
2239-20 12V Li-Ion Clamp Meter, Bare Tool ONLY
12V Li-Ion Thermometers
A heavy duty pistol grip infrared thermometer
for professional, commercial and industrial
applications. Powered by the Milwaukee M12
Lithium Ion battery, LASER-TEMP GUNs™ can
safely measure temperatures between -22 to
1472° F with a 40:1 distance to spot ratio for
even the most demanding industrial applica-
tions. Designed with embedded non-contact
voltage detection and an extra bright LED
Floodlight to increase end user productivity.
HVAC/R LASER-TEMP GUN™ Kit 2277-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Measures ambient humidity and dew point
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2277-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity: Adj. .10
Basic Accuracy: 1.50% Distance to Spot: 40:1
Contact Temperature: -40°F to 1022°F Data Storage: 20 points
Part No. Description
2277-21 12V Li-Ion HVAC/R LASER-TEMP GUN™ Kit
2277-20 12V Li-Ion HVAC/R LASER-TEMP GUN™, Bare Tool ONLY
LASER-TEMP GUN™ Kit 2276-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2276-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity: 0.10 to 1.0
Contact Temperature: -40°F to 1022°F Distance to Spot: 40:1
Basic Accuracy: 1.50% Data Storage: 20 points
Part No. Description
2276-21 12V Li-Ion LASER-TEMP GUN™ Kit
2276-20 12V Li-Ion LASER-TEMP GUN™, Bare Tool ONLY
273
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
12V LI-ION CORDLESS
Combination Kits
KIT COMPONENTS
2-Tools 2-Tools 2-Tools 2-Tools 2-Tools 4-Tools 4-Tools
2490-22 2239-23 2276-23 2290-23 2491-22 2490-24 2491-24
2401-20
M12 Screwdriver
2420-20
M12 HACKZALL®
Recip Saw
(Incl. G.P. HACKZALL® Blade)
2471-20
M12 Copper
Tubing Cutter
2450-20
M12 1/4" Hex
Impact Driver
49-24-0145
M12 Work Light
2239-20
M12 CLAMP-GUN™
Clamp Meter
2276-20
M12 LASER TEMP-GUN™
Thermometer
2290-20
M12 SUB-SCANNER™
Detection Tool
ACCESSORIES INCLUDED:
(2) 48-11-2401
M12 Lithium-Ion
Batteries
48-59-2401
M12 Battery
Charger
Contractor Bag
274 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V LI-ION CORDLESS
12V Li-Ion Power Port
Portable charger capable of charging five
small electronic devices (two at a time) on
a single battery pack. Includes DC and USB
ports.
Does not include M12™ battery or charger
Part No. Description
2349-20 M12™ Power Port
2349-20
Job Site Radio
Smallest Job Site Radio with best in class
reception and sound. Only 11" x 6.5" x 4",
this weather-resistant radio features and
advanced digital tuner and is compatable
with iPod® and MP3 players.
FEATURES:
• 10 Station Presets
• Equalizer
• Digital Display
• Storage compartment for iPod or MP3
player.
• Powered by M12 Li-Ion battery, AAA
Alkaline batteries or AC cord.
• INCLUDES AC Cord, (2) AAA batteries
and Auxiliary Cord. (M12 battery & charger
NOT included)
Part No. Description
2590-20 M12 Job Site Radio
12V Li-Ion Worklights
Provides hands-free light in a
compact and lightweight pack-
age. Both lights feature a 90°
rotating head, projecting light in
any direction. Integrated mag-
net provides hands-free use.
Worklight 49-24-0145
• Xenon incandescent bulb
LED Worklight
49-24-0146
• 90-degree pivoting aluminum
head – Impact and weather
resistant
• LED lights provide 2X
brighter light and runs twice as
long as incandescent bulbs
Lights do not include M12™ battery or
charger
Part No. Description
49-24-0145 Cordless Xenon Worklight
49-24-0146 Cordless LED Worklight
12V Li-Ion XC High
Capacity Battery
For use with most Milwaukee M12™ Tools
and Accessories.
FEATURES:
• Increased power - 2X the run-time and
increased performance
• Compact - Only 2-1/2" by 3-1/2"
• Provides durable and stable base for
tools to stand upright.
• Rubber over-mold to provide shock
absorption and protect finished surfaces.
• 2-year warranty
Part No. Description
48-11-2402 M12 12V XC High Capacity
Battery
12V Li-Ion
Battery
For use with Milwaukee
M12™ Tools & Accessories.
FEATURES:
• 1.4 amp hour battery
• Compact/Lightweight:
Over 65% lighter and
over 50% smaller vs.
"compact" NiCd Batteries
• Ergonomic- compact, and lightweight
design for operator comfort
• 2-year warranty
Part No. Description
48-11-2401 M12 12V Battery
Batteries
12V Li-Ion Battery Charger
For Use with Milwaukee M12™ Tools and
Accessories. 30 minute charger.
Part No. Description
48-59-2401 M12 12V 30-min Charger
12V Li-Ion Wall and Vehicle
Battery Charger
A dually functional unit that has the capa-
bility to charge M12™ LITHIUM-ION bat-
teries in a traditional wall outlet or vehicle
DC outlet. Now, whether the user is in a
work truck on the work site, one charger
can do the job. The 2510-20 model is cov-
ered by the Milwaukee 5-Year Warranty.
Part No. Description
2510-20 M12 12V Wall & Vehicle
Charger
Chargers
275
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
12V LI-ION CORDLESS
12V MAX® Li-Ion
3/8" Sub-Compact Drill/Driver Kit
• Compact, lightweight design fits into
tight areas.
• Two speed transmission for optimal
speed and torque control.
• Belt hook included for portability.
• LED work light provides increased vis-
ibility in confined spaces.
• 3 Year Limited Warranty
• KIT Includes (2) batteries, fast charger,
belt hook and contractor bag.
Specifications
Volts: 12 V DC
Max. Power: 189 UWO
# of Speed Settings: 2
Max RPM: 0-1,700
Clutch Settings: 15
Weight: 2.4 lbs.
Part No. Description
DCD710S2 12V 3/8" Sub-Compact Drill/
Driver Kit
DCD710S2
SUB-COMPACT
12V MAX® Li-Ion
1/4" Sub-Compact Screwdriver Kit
• Compact, lightweight design fits into
tight areas.
• One-handed loading 1/4" hex chuck ac-
cepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased vis-
ibility without shadows.
• 3 Year Limited Warranty
• KIT Includes (2) batteries, fast charger,
bit tip, belt hook and contractor bag.
Specifications
Volts: 12 V DC
Max. Power: 160 UWO
Drive: 1/4"
No-Load Speed: 0-1,050 RPM
Weight: 2.2 lbs.
Part No. Description
DCF610S2 12V 1/4" Sub-Compact
Screwdriver Kit
DCF610S2
SUB-COMPACT
12V MAX® Li-Ion
3/8" Sub-Compact
Impact Wrench Kit
• Compact, lightweight design fits into
tight areas.
• 3/8" Hog ring anvil; Fast socket changing.
• 1150 in/lbs. of torque; Power for fasten-
ing, tightening and loosening.
• 3 LED work lights provides increased vis-
ibility without shadows.
• 3 Year Limited Warranty
• KIT Includes (2) batteries, fast charger,
and contractor bag.
Specifications
Volts: 12 V DC
Drive: 3/8"
No-Load RPM: 0-2,450 RPM
Impacts/Minute: 0-3,400 IPM
Max Torque: 1150 in/lbs.
Weight: 2.3lbs.
Part No. Description
DCF813S2 12V 3/8" Sub-Compact
Impact Wrench Kit
DCF813S2
SUB-COMPACT
DCF815S2
SUB-COMPACT
12V MAX® Li-Ion
1/4" Sub-Compact
Impact Driver Kit
• Compact, lightweight design fits into
tight areas.
• One-handed loading 1/4" hex chuck ac-
cepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased vis-
ibility without shadows.
• 3 Year Limited Warranty
• KIT Includes (2) batteries, fast charger,
bit tip, belt hook and contractor bag.
Specifications
Volts: 12 V DC
Drive: 1/4"
No-Load RPM: 0-2,450 RPM
Impacts/Minute: 0-3,400 IPM
Max Torque: 950 in/lbs.
Weight: 2.3lbs.
Part No. Description
DCF815S2 12V 3/8" Sub-Compact
Impact Wrench Kit
276 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V LI-ION CORDLESS
12V MAX® Li-Ion 1/4" Sub-Compact
Screwdriver / Impact Driver Combo Kit
Impact Driver and Screwdriver both feature:
• Compact, lightweight design fits into tight areas.
• One-handed loading 1/4" hex chuck accepts 1" bit tips.
• Belt hook included for portability.
• 3 LED work lights provides increased visibility without shadows.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
• KIT Includes (2) batteries, fast charger, (2) Bit tips, (2) belt Hooks,
and contractor bag.
DCF 610S2 Screwdriver Specifications
Volts: 12 V DC
Max. Power: 160 UWO
Drive: 1/4"
No-Load Speed: 0-1,050 RPM
Weight: 2.2 lbs.
DCF815S2 Impact Driver Specifications
Volts: 12 V DC
Drive: 1/4"
No-Load RPM: 0-2,450 RPM
Impacts/Minute: 0-3,400 IPM
Max Torque: 950 in/lbs.
Weight: 2.3lbs.
Part No. Description
DCK210S2 12V 1/4" Sub-Compact Screwdriver / Impact Driver
Combo Kit
DCK210S2
12V MAX® Li-Ion
Infrared Thermometer Kit
• Non-contact temperature measurements (-20° F to 932° F) for
ease of use over distance and accuracy.
• LED hot (red) and cold (blue) indicator for visual and/or audio
alarm for quickly locating trouble spots.
• Data storage for recording maximum, minimum and average
temperatures.
• Adjustable emissivity improves accuracy across a wide range of
materials.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
• KIT Includes battery, fast charger and kit box
Specifications
Volts: 12 V DC
Weight: 4.8 lbs.
Part No. Description
DCT414S1 12V Infrared Thermometer Kit
12V MAX®
Li-Ion Fast Charger
• Charges all DeWalt® 12V
MAX® Li-Ion batteries.
• Charges the battery in
40 minutes or less, mini-
mizing downtime.
• Diagnostics with LED
indicator communicates
battery charge status:
charged, charging,
power line problem,
replace pack and battery too hot or too cold.
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
Part No. Description
DCB100 12V MAX® Li-Ion Battery Charger
12V MAX® Li-Ion Battery Pack
• Compact, lightweight design.
• Quick 40 minute charge time.
• No memory and virtually no self-discharge for maximum pro-
ductivity and less downtime.
• Requires 12V MAX® compatible charger (DCB100)
• 3 Year Limited Warranty
• 1 Year Free Service Contract
• 90 Day Money Back Guarantee
Part No. Description
DCB120 12V MAX® Li-Ion Battery Pack
DCT414S1
SUB-COMPACT
277
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
24V NICAD CORDLESS
NiCad 24V 7/8" SDS Hammer Kit
• Variable speed, reversing switch delivers
versatility in all applications.
• Factory-set clutch reduces sudden, high
torque reactions if bit jams.
• Electro-pneumatic hammer mechanism for
fast penetration and low vibration.
• 360° side handle for better control and
ease of use in tight spaces.
• SHOCKS - Active Vibration Control signif-
cantly reduces vibration and increases user
comfort and productivity.
• Compact L-Shape Design allows access in
tight spaces while providing optimal bal-
ance for the user.
• 1.7 ft-lbs impact energy provides corded
power without the cord.
• KIT Includes (2) batteries, 1 hour
charger, 360° side handle, depth rod &
impact-resistant case.
Specifications
Volts: 24 V DC
No Load Speed: 0-1,100 RPM
Blows/Min: 0-4,100 BPM
Weight: 8.4 lbs.
Part No. Description
DC223KA 24V 7/8" SDS Hammer Kit
24
VOLT
NiCd
DC223KA
24
VOLT
NiCd
24V NiCad XR+™
Fan-Cooled Battery Pack
• FAN COOLED technology cools
down battery quickly thus extend-
ing battery life.
`• High capacity XR+™ Pack bat-
tery offers extended run time
without sacrificing number of
recharges
• Powers entire DEWALT® line of
24V tools
• Durable slide rail interface
keeps battery securely in place
even during the most extreme applications.
Part No. Description
DW0242 24V XR+ Fan-Cooled Battery Pack
24V NiCd Accessories
24V Fan-Cooled Chargers
• FAN COOLED technology quickly cools batttery, thus extending
battery life.
• Charges all 24V batteries in 1 hr. or less, minimizing down time.
• 3-Stage charging system provides maximum run-time extending
overall life of the battery.
• Battery thermal protection system prevents charging batteries
that are too hot or too cold.
• Diagnostics with LED indicator communicate battery charge status.
• Durable slide rail interface keeps battery securely in place even
during the most extreme applications.
Part No. Description
DW0246 24V Fan-Cooled Battery Charger
DW0249 24V Fan-Cooled Vehicle Battery Charger
24
VOLT
NiCd
DW0246
DW0249
• Rock Carbide® tip for longer life.
• Four flute design for fast, efficient
drilling.
• Maximizes hammer energy for greater impact power.
Part No. Description
DW5401B25 5⁄32 x 4½ x 6½ OAL
DW5403B25 3⁄16 x 4½ x 6½ OAL
DW5404B25 3⁄16 x 6½ x 8½ OAL
DW5416B25 ¼ x 2 x 4 OAL
DW5417B25 ¼ x 2 x 4 OAL
DW5418B25 ¼ x 6½ x 8½ OAL
DW5421 ¼ x 12 x 14 OAL
DW5424B25 5⁄16 x 4 x 6 OAL
DW5427B25 3⁄8 x 4 x 6 OAL
DW5437B25 ½ x 4 x 6 OAL
DW5438 ½ x 8 x 10 OAL
DW5439 ½ x 10 x 12 OAL
DW5446B25 5⁄8 x 6 x 8 OAL
DW5453 ¾ x 6 x 8 OAL
Be sure to visit
www.GoNefco.com
for the latest tools & products
from DeWalt
278 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V NICAD CORDLESS
NiCd 18V 1/2" Compact Hammerdrill Kit
DC725KA
18
VOLT
NiCd
XRP™ 18V NiCad
1/2" Drill/Driver Kit
• Patented 3-speed all-metal transmission
matches the tool to task for fastest ap-
plication speed and improved run time.
• Heavy-duty 1/2" ratcheting chuck helps
prevent bits from slipping and falling out.
• LED Worklight provides increased visibil-
ity in confined spaces.
• High power, high efficiency motor deliv-
ers 450 unit watts out of max power for
superior performance in all drilling and
fastening applications.
• Best in class length improved balance and
better control.
• KIT Includes (2) batteries, 1 hour charger,
and kit box.
Specifications
Volts: 18 V DC
Max. Power: 450 UWO
# of Speed Settings: 3
Max RPM: 0-500/0-1,250/0-2,000
Clutch Settings: 22
Weight: 6.25 lbs.
Part No. Description
DCD940KX 18V XRP 1/2" Drill/Driver Kit
18
VOLT
NiCd
DCD940KX
• Compact size: allows users to fit into
tight spaces
• Lightweight design minimizes user fatigue
• 1/2'' single sleeve ratcheting chuck re-
duces bit slippage
• Dual speed range 0-500/0-1,700 rpm
0-8,500/0-29,000 bpm delivers optimal
performance
• High performance frameless motor deliv-
ers maximum power of 410 unit watts out
• LED work light provides increased visibility
in confined spaces
• KIT Includes (2) batteries, 1 hour charger,
screwdriver bit & kit box.
Specifications
Volts: 18 V DC
Max. Power: 410 UWO
# of Speed Settings: 2
Max RPM: 0-500/0-1,700
MAX BPM: 0-8,500/0-29,000
Clutch Settings: 17
Weight: 4.9 lbs.
Part No. Description
DC725KA 18V 1/2" Compact
Hammerdrill Kit
18V NiCad
1/2" Compact Drill/Driver Kit
• Compact size fits into the tightest conditions
• Lightweight design minimizes user fatigue
• High performance motor delivers maxi-
mum power of 380 unit watts out
• Dual speed range: 0-450/0-1,500 rpm
delivers optimal performance
• 1/2" single sleeve keyless ratcheting
chuck for tighter bit grip
• Maximum durability and reliability with-
stands jobsite conditions
• KIT Includes (2) batteries, 1 hour charger,
double-ended screwdriver bit & kit box.
Specifications
Volts: 18 V DC
Max. Power: 380 UWO
# of Speed Settings: 2
Max RPM: 0-450/0-1,500
Clutch Settings: 17
Weight: 5.2 lbs.
Part No. Description
DC759KA 18V 1/2" Compact Drill/
Driver Kit
18
VOLT
NiCd
DC759KA
COMPACT
18V NiCad
1/2" Compact Drill/Driver Kit
• Compact size: allows users to fit into
tight spaces.
• Lightweight design minimizes user fatigue
• 1/2'' ratcheting chuck reduces bit slippage.
• Dual speed range 0-500/0-1,700 rpm
delivers optimal performance
• High performance frameless motor delivers
maximum power of 410 unit watts out
• LED work light provides increased vis-
ibility in confined spaces
• KIT Includes (2) batteries, 1 hour charger,
and kit box.
Specifications
Volts: 18 V DC
Max. Power: 410 UWO
# of Speed Settings: 2
Max RPM: 0-500/0-1,700
Clutch Settings: 17
Weight: 4.8 lbs.
Part No. Description
DC720KA 18V 1/2" Compact Drill/
Driver Kit
18
VOLT
NiCd
DC720KA
COMPACT
COMPACT
279
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V NICAD CORDLESS
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
• 3-speed all-metal transmission
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation
• LED worklight provides increased visibility
in confined spaces
• High power, high efficiency motor delivers
450 unit watts out of max power
• Best in class length for improved balance
and better control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts: 18 V DC
Max. Power: 450 UWO
# of Speed Settings: 3
Max RPM: 0-500/0-1,250/
0-2,000
Max BPM: 0-8,500/0-21,250/
0-34,000
Clutch Settings: 22
Weight: 6.25 lbs.
Part No. Description
DCD950KX 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DCD950VX Same, with Vehicle Charger
DCD950B Bare Tool Only
DCD950KX
18
VOLT
NiCd
DC988KA
18
VOLT
NiCd
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
• High torque motor delivers 500 in-lbs of
maximum torque
• 3-speed transmission features a max 3rd
speed at 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills
faster holes in masonry applications
• 1/2" Metal ratcheting chuck with carbide
jaws prevents bits from slipping
• Superior ergonomics provides optimal
balance, comfort and control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts: 18 V DC
Max. Power: 420 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450/
0-2,000
Max BPM: 0-7,650/0-24,650/
0-34,000
Clutch Settings: 22
Weight: 5.95 lbs.
Part No. Description
DC988KA 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DC988VA Same, with Vehicle Charger
DCD959KX
18
VOLT
NiCd
XRP™ 18V NiCad
1/2" Hammerdrill/Drill/Driver Kit
• Patented 3-speed all-metal transmission
matches the tool to task application for
fastest application speed
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping strength
• High power, high efficiency motor deliv-
ers 420 unit watts out of max power for
superior performance in all drilling and
fastening applications
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts: 18 V DC
Max. Power: 420 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450/
0-2,000
Max BPM: 0-7,650/0-24,650/
0-34,000
Clutch Settings: 22
Weight: 6.0 lbs.
Part No. Description
DCD959KX 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DCD959VX Same with Vehicle Charger
DC989KA
18
VOLT
NiCd
XRP™ 18V NiCad 1/2" Hammerdrill/Drill/Driver Kit
• High torque motor delivers 500 in-lbs of
maximum torque
• Patented 3-speed transmission features a
maximum 3rd speed At 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills
faster holes in masonry applications
• 1/2" metal ratcheting chuck with carbide
jaws helps to prevent bits from slipping
• Superior ergonomics provides optimal
balance, comfort and control
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts: 18 V DC
Max. Power: 420 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450/
0-2,000
Max BPM: 0-7,650/0-24,650/
0-34,000
Clutch Settings: 22
Weight: 5.95 lbs.
Part No. Description
DC989KA 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit
DC989VA 18V XRP 1/2" Hammerdrill/
Drill/Driver Kit, with Vehicle
Charger
280 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V NICAD CORDLESS
XRP™ NiCad
18V 1/2" High Torque
Impact Wrench
• Preferred rocker switch de-
sign for fast, easy fastening.
• Comfort grip provides maxi-
mum comfort
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy-duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 18 V DC
Drive Size: ½" square
w/detent pin
No Load Speed: 1,650 rpm
Impacts/min: 2,600 bpm
Max Torque: 3,600 in-lbs.
300 ft.-lbs.
Weight: 7.55 lbs.
Part No. Description
DW059K-2 18V XRP 1/2"
High Torque
Impact Wrench
DW059B Bare Tool, ONLY
18
VOLT
NiCd
DW059K-2
XRP™ NiCad
18V 1/2" Impact Wrench
• Compact size & weight allows
access into tighter areas and
reduces user fatigue.
• Textured anti-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 18 V DC
Drive Size: ½" square
w/detent pin
No Load Speed: 0-2,400 rpm
Impacts/min: 2,700 bpm
Max Torque: 145 ft.-lbs.
Weight: 4.6 lbs.
Part No. Description
DC820KA 18V XRP 1/2"
Impact Wrench
Kit
DC820KB Bare Tool, ONLY
18
VOLT
NiCd
DC820KA
XRP™ 18V NiCad
1/4" Impact Driver
• Compact size & weight allows
access into tighter areas and
reduces user fatigue.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 18 V DC
Drive Size: ¼" Hex shank
quick release
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 bpm
Max Torque: 111 ft.-lbs.
Weight: 4.6 lbs.
Part No. Description
DC825KA 18V XRP 1/2"
Impact Driver
Kit
DC825KB Bare Tool, ONLY
18
VOLT
NiCd
DC825KA
18
VOLT
NiCd
DC821KA
XRP™ NiCad
18V 1/2" High Torque
Impact Wrench
• Durable all-metal gear case
and transmission
• Variable speed trigger and
electric brake
• Textured anti-slip comfort grip
• Heavy-duty impact mecha-
nism delivers torque to
fastener without kickback
• Works with all 18V DEWALT®
batteries (XRP™, NANO™ and
Compact)
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 18 V DC
Drive Size: ½" square
w/detent pin
No Load Speed: 2,100 rpm
Impacts/min: 3,000 bpm
Max Torque: 1,920 in-lbs.
160 ft.-lbs.
Weight: 5.3 lbs.
Part No. Description
DC821KA 18V XRP 1/2"
High Torque
Impact Wrench
18
VOLT
NiCd
DC823KA
XRP™ NiCad 18V 3/8" Impact Wrench Kit
• Frameless motor for extended tool durability
and life
• Compact size and weight allow access into
tighter areas and reduces user fatigue
• 1,500 in-lbs of torque to perform a wide
range of fastening applications
• 0-2,400 rpm/0-2,700 ipm for faster applica-
tion speed
• Replaceable brushes for increased serviceability
• Textured anti-slip comfort grip provides maxi-
mum comfort
• Durable magnesium gear case and all metal
transmission for extended durability
• Heavy-duty impacting mechanism directs
torque to fastener without kickback
• KIT Includes (2) batteries, 1 hour charger,
360° side handle and kit box.
Specifications
Volts: 18 V DC
Drive Size: 3/8" square
w/hog ring retention pin
No Load Speed: 0-2,400 rpm
Impacts/min: 2,700 bpm
Max Torque: 125 ft.-lbs.
Weight: 4.6 lbs.
Part No. Description
DC823KA 18V XRP 3/8" Impact Wrench Kit
DC823B Bare Tool, ONLY
281
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V NICAD CORDLESS
18
VOLT
NiCd
DC212KA
XRP™ NiCad 18V 7/8" SDS Hammer Kit
18
VOLT
NiCd
DW411KA
XRP™ NiCad 18V 4½" Cut-Off Tool Kit
18
VOLT
NiCd
DC385K
XRP™ NiCd 18V Reciprocating Saw Kit
• 4-position blade clamp allows for flush
cutting and increased versatility.
• Lever-action keyless blade clamp.
• Anti-slip comfort grip.
• Pivoting adjustable shoe with open top.
• Variable speed with trigger lock.
• KIT Includes (1) battery, 1 hr. charger,
reciprocating saw blade & hard case.
Specifications
Volts: 18 V DC
Strokes/minr: 0-3,000 spm
Stroke length: 11 ⁄
8"
Electric Brake: Yes
Weight: 8.2 lbs.
Part No. Description
DC385K 18V XRP Reciprocating Saw Kit
18
VOLT
NiCd
DC490KA
XRP™ NiCad 18V 18 Ga. Swivel Head & Shear Kit
• Variable speed, reversing switch delivers versatility in all applications.
• Factory-set clutch reduces sudden, high torque reactions if bit jams.
• Electro-pneumatic hammer mechanism for fast penetration and low vibration.
• 360° side handle for better control and ease of use in tight spaces.
• SHOCKS - Active Vibration Control significantly reduces vibration
• Compact L-Shape Design allows access in tight spaces while providing optimal balance
• 1.7 ft-lbs impact energy provides corded power without the cord.
• KIT Includes (2) batteries, 1 hour charger, 360° side handle, depth rod & kit box.
Specifications
Volts: 18 V DC
No Load Speed: 0-1,100 RPM
Blows/Min: 0-4,100 BPM
Weight: 7.6 lbs.
Part No. Description
DC212KA 18V 7/8" SDS Hammer Kit
DC212B Bare Tool, ONLY
• 6,500 rpm provides high power for cutting and grinding applications
• Convenient trigger switch with lock-off button for easier gripping
• 2 Position side handle offers greater comfort and control
• Quick-change wheel release provides easier and quicker wheel removal without the
need for a wrench
• Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter
transmission while allowing access to tight space
• KIT Includes (2) batteries, 1 hour charger, Type 27 & Type 1 guards, 2 matched flanges,
wrench, Type 27 wheel, 2-position side handle & contractors bag.
Specifications
Volts: 18 V DC
No Load Speed: 6,500 rpm
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Min. Wheel RPM: 10,000 rpm
Weight: 7.0 lbs.
Part No. Description
DW411KA 18V Cordless 4½" Cut-Off
Tool Kit
DW411B Bare Tool ONLY
• Head swivels 360° which allows user to ac-
cess tight quarters while maintaining comfort.
• Cuts 7/32" strip which continuously curls
out of the cutting area.
• KIT Includes (2) batteries, 1 hour charger,
Blade Wrench & impact-resistant case.
Specifications
Volts: 18 V DC
Strikes/Min: 0-2,300 spm
Min. Cut Radius: 5.5"
Cap. in Steel: 18-28 ga.
Weight: 6.1 lbs.
Part No. Description
DC490KA 18V Cordless Swivelhead
& Shear Kit
282 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V NICAD CORDLESS
XRP™ NiCad 18V
6¾" Metal Cutting Circular Saw
• 6¾" 40-tooth carbide tipped blade cuts
up to 2" conduit and pipe in one pass.
• All metal upper and lower guards for
maximum durability.
• Multi-Coated SIGHT-LINE™ Window for
maximum abrasion resistance.
• Stainless-steel shoe stays rust free while
minimizing chip build-up which prevents
marring of the cutting surface.
• ULTRA SIGHT-LINE™ Scope allows maxi-
mum visibility to the cut line.
• KIT Includes (2) batteries, 1 hour charger,
40 tooth titanium carbide saw blade, &
impact-resistant case.
Specifications
Volts: 18 V DC
No Load Speed: 3,200 rpm
Blade Diameter: 6¾"
Bevel Capacity: N/A
Arbor Size: 20mm
Depth of Cut: 2
3 ⁄
8" @ 90°
Weight: 9.5 lbs.
Part No. Description
DW934K-2 18V 6¾" Metal Cutting
Circular Saw Kit
XRP™ NiCad 18V
6½" Circular Saw
• 3,700 RPM for fast rip cuts & cross cuts.
• 6½" carbide tipped blade for 2X cutting
capacity at 90° and 45°.
• High strength magnesium shoe and up-
per guard provides increased durability.
• 0-50° bevel capacity.
• Fan-cooled motor with replaceable brushes.
• XRP™ extended run-time battery pro-
vides long run-time & battery life.
• KIT Includes (1) battery, 1 hour charger,
16 tooth-carbide saw blade, rip fence,
blade wrench & impact-resistant case.
Specifications
Volts: 18 V DC
No Load Speed: 3,700 rpm
Blade Diameter: 6½"
Bevel Capacity: 0-50°
Arbor Size: 5 ⁄ 8"
Depth of Cut: 15 ⁄
8" @ 45° / 2¼" @ 90°
Weight: 8.7 lbs.
Part No. Description
DC390K 18V XRP 6½" Circular Saw Kit
18
VOLT
NiCd
DW934K-2
18
VOLT
NiCd
DC390K XRP™ NiCad 18V Light
Gauge Steel Framing Screw-
driver Kit
• VERSA-CLUTCH® torque adjustment sys-
tem to "dial" the proper torque needed.
• 0-900/0-2,700 rpm for better fastener
control in various material thickness.
• Tool designed for steel fastening applica-
tions that is ideal for use in 12-28 ga.
• KIT Includes (2) batteries, 1 hour charger,
#2 Phillips screwdriver bit, 5
⁄
16" nut runner
& impact-resistant case.
Specifications
Volts: 18 V DC
Drive Size: ¼" Hex in
No Load Speed: 0-9,000/0-2,700 rpm
Max Torque: 180 ft.-lbs.
Capacity (CRS): 12-28 gauge
Weight: 5.4 lbs.
Part No. Description
DC668KA 18V XRP Cordless Light
Gauge Steel Framing
Screwdriver Kit
18
VOLT
NiCd
DC668KA
XRP™ NiCad 18V
Drywall/Deck Screwdriver Kit
• Dual speed ranges; high speed for dry-
wall, low speed for decking.
• Depth sensitive "set and forget" nose-
piece for consistent fastener depth.
• High-performance motor with fan cooling
delivers maximum power and durability.
• KIT Includes (2) batteries, 1 hour charger,
Bit tip/magnetic holder, drywall nosepiece,
TEKS® nosepiece & impact-resistant case.
Specifications
Volts: 18 V DC
Drive Size: ¼" Hex in
No Load Speed: 0-9,000/0-2,900 rpm
Max Torque: 180 ft.-lbs.
Capacity (CRS): 12 gauge
Weight: 12.3 lbs.
Part No. Description
DC520KA 18V XRP Cordless Drywall/
Deck Screwdriver Kit
18
VOLT
NiCd
DC520KA
XRP™ NiCad 18V Cut-Out Tool
• Tool-free bit change for fast and easy bit changing
• 26,000 rpm motor provides more cutting power
• Dust sealed switch provides durability and long switch life
• KIT Includes (2) batteries, 1 hour charger, (1) general purpose bit, (1)
drywall cutting bit, ¼" & 1
⁄
8" collets & impact-resistant case.
Part No. Description
DC550KA 18V XRP Cut-Out Tool Kit
18
VOLT
NiCd
XRP™ NiCad 18V Pencil
Vibrator Kit
• 11
⁄
8" diameter x 4' long flexible
shaft provides easy use and long reach.
• 14,000 VPM (under load) delivers maximum consolidation efficiency.
• KIT Includes (2) batteries, 1 hour charger, soft-side bag for batteries & charger.
Part No. Description
DC530KA 18V XRP Cordless Pencil Vibrator Kit
18
VOLT
NiCd
DC530KA
283
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
18V NICAD CORDLESS
KIT COMPONENTS
2-Tools 2-Tools 2-Tools 4-Tools 4-Tools 5-Tools 6-Tools 6-Tools 9-Tools 9-Tools
DCK
255X
DCK
251X
DCK
250X
DCK
450X
DCK
455X
DCK
550X
DCK
650X
DCK
655X
DCK
950X
DCK
955X
DCD950 18V
1/2" Hammerdrill
Drill Driver
(Includes 360° Side Handle)
DW960 18V
Right Angle Drill
DC385
18V Recip
Saw
DC390 18V
6-1/2" Circular Saw
(Includes 6-1/2" Blade)
DC330 18V
Jig Saw
DC825 18V
1/4" Hex
Impact Driver
DW059 18V
1/2" High Torque
Impact Wrench
DC411
4-1/2" Cut-Off Tool
(Includes Guards, Backing
Flange, Wrench & Type 1 Wheel)
DC550 18V
Cut-Out Tool
DW919
Flexible Floodlight
ACCESSORIES INCLUDED:
(2) DC9096
18V Li-Ion
Batteries
DC9310
1-Hour Charger
Contractor Bag (2)
Bags
(2)
Bags
Combination Kits
284 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
18V Pivoting
Head Flashlight
• Wide angle beam
• Head rotates 90°
• Xenon bulb provides
extra bright beam of
light
• Lightweight, compact
design
• Battery/Charger not
included
Specifications
Volts: 18 V DC
Bulb: Xenon
Run-Time: 3 hours
Weight: 0.5 lbs.
Part No. Description
DW908 18V Flashlight
18V ½ Gallon Wet/Dry
Portable Vac
• 1/2 gallon tank with heavy-duty latch is
easy to empty and clean
• Gore™ HEPA wet/dry filter traps 99.97%
of dust at 0.3 microns
• Washable filter, rinse to clean. Tank is
easy to empty and clean
• Heavy-duty rubber hose
• Includes (1) XRP™ battery (NICd), 1 hour
charger.
Specifications
Tank Size 1/2 gal
Voltage 18 V DC
Hose Diameter 1-1/4"
Weight 6.0 lbs
Hose Length 2.5 feet
Part No. Description
DC515K 18V 1/2 gal. Portable Wet/
Dry Vac
18V NICAD CORDLESS
18
VOLT
NiCd
18V NiCd XRP™ Battery Pack
• High capacity XRP™ battery has 40% more
run-time than standard batteries.
• Powers entire DeWalt line of 18V tools
allowing users to run multiple tools off of
the same battery pack.
Part No. Description
DC9096 18V XRP Battery Pack
18V NiCd Chargers
• Charges DEWALT® 7.2V - 18V NiCd and
NiMH batteries.
• 3-Stage Charging System, Thermal
Protection and LED Diagnostic indicators
provides maximum run-time and extends
overall life of the battery.
Part No. Description
DC9310 18V Charger
DW9216 18V Dual-Port Charger
DW9117 18V 15 min. Charger
DW9109 18V Charger Vehicle Charger
18
VOLT
NiCd
DW9117DC9310
DC9216DW9109
18V NiCad Accessories
Worksite Radio Charger
• Charges 7.2V to 18V NiCad battieries.
• AM/FM Digital tuner with LCd display,
built-in clock, and 8 station memory
presets.
• Runs off 7.2V to 18V batteries and 120V
AC/DC.
• Auxiliary port allows connection to
CD players, MP3 players, iPods, and
portable satellite receivers with an audio
cable. (Cable not included).
Part No. Description
DC011 Worksite Radio Charger
18V Flexible
Floodlight
• Flex neck design with
lockable head clips allow
for hands free use and
versatility to stand or
hang light.
• Wide angle beam of light
provides more light than
a conventional flashlight.
• Xenon bulb provides ex-
tra bright beam of light.
• Battery/Charger not
included.
Specifications
Volts: 18 V DC
Bulb: Xenon
Run-Time: 3 hours
Weight: 0.5 lbs.
Part No. Description
DW919 18V Flexible Floodlight
18V Fluorescent
Area Light
• Built-in telescoping hook
allows hanging from 2"
materials.
• Over-molded lens for
increased durability
• 13W fluorescent bulb
• Lightweight, compact
design
• Battery/Charger not
included
Part No. Description
DC515 18V
Fluorescent Area Light
285
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
14.4 NICAD CORDLESS
14.4V NiCad
1/2" Hammerdrill/Drill/Driver Kits
• DeWalt built high power, high efficiency
motor delivers maximum performance in
all drilling and fastening applications.
• XRP™ extended run-time batteries pro-
vide long run-time & battery life.
• Patented 3-speed all-metal transmission
matches the speed to the application for
optimal performance.
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping torque.
• Superior ergonomics optimize balance,
size and weight.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Max. Power: 335 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450/0-1,800
Max BPM: 0-7,650/0-24,650/0-30,600
Clutch Settings: 22
Weight: 5.4 lbs.
Part No. Description
DC935KA 14.4V 1/2" Hammerdrill/Drill/
Driver Kit
DC936KA 14.4V 1/2" Hammerdrill/Drill
Driver Kit
14.4V NiCad 3/8" Right Angle Drill/Driver Kit
• 2 speed ranges 0-450/0-1,250 rpm for in-
creased user flexibility providing a wide range
of applications.
• 210 unit watts out of maximum power for
heavy-duty applications.
• Multi-grip trigger provides comfort and conve-
nience by allowing the user to get into tighter
spaces while still having access to the trigger.
• Variable speed and reversing gives the user the
ability to control speed.
• Durable, right angle transmission with sealed
ball bearing for a longer tool life.
• KIT Includes (2) batteries, 1 hour charger & impact-
resistant case.
Specifications
Volts: 14.4 V DC
Max. Power: 210 UWO
# of Speed Settings: 2
Max RPM: 0-400/0-1,250
Chuck Type: Plastic, 2-Sleeve
Weight: 4.4 lbs.
Part No. Description
DW966K-2 14.4V 3/8" Right Angle Drill/Driver Kit
14.4V
Replacement Battery
• Powers entire line of
DeWalt 14.4V tools.
Part No. Description
DC9091 14.4V Battery
14.4V NiCad
1/2" Drill/Driver Kit
• DeWalt built high power, high efficiency
motor delivers maximum performance in
all drilling and fastening applications.
• XRP™ extended run-time batteries pro-
vide long run-time & battery life.
• Patented 3-speed all-metal transmission
matches the speed to the application for
optimal performance.
• Heavy-duty 1/2" self-tightening chuck
tightens throughout operation providing
superior bit gripping torque.
• Superior ergonomics optimize balance,
size and weight.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Max. Power: 335 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450/0-1,800
Clutch Settings: 22
Weight: 5.3 lbs.
Part No. Description
DC930KX 14.4V 1/2" Drill//Driver Kit
14.4
VOLT
NiCd
DC930KX
14.4
VOLT
NiCd
DC936KA
DC935KA
14.4
VOLT
NiCd
DW966K-2
14.4
VOLT
NiCd
14.4V NiCad
1/2" Compact Drill/Driver Kit
• Compact size: fits into the tightest conditions.
• Lightweight design minimizes user fatigue.
• 1/2" single sleeve keyless ratcheting
chuck for tighter bit grip.
• Maximum durability and reliability with-
stands jobsite conditions.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Max. Power: 270 UWO
# of Speed Settings: 3
Max RPM: 0-400/0-1,400
Clutch Settings: 17
Weight: 4.7 lbs.
Part No. Description
DC728KA 14.4V 1/2" Compact Drill/
Driver Kit
DC728KA
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
286 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
14.4V NICAD CORDLESS
14.4V NiCad 1/2" Square
Drive Impact Wrench Kit
• Compact size & weight allows access into
tighter areas and reduces user fatigue.
• 1,550 in-lbs of max torque to perform a
wide range of fastening applications.
• 0-2,400 rpm/0-3,000 bpm for faster ap-
plication speed.
• Textured ant-slip comfort grip provides
maximum comfort.
• Durable magnesium gear case and all
metal transmission for extended durability.
• Heavy duty impacting mechanism directs
torque to fastener without kickback.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Drive Size: 1/2" Square Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 135 ft.-lbs.
Weight: 3.9 lbs.
Part No. Description
DC830KA 14.4V 1/2" Cordless
Impact Driver Kit
14.4
VOLT
NiCd
14.4V NiCad
Reciprocating Saw
• Keyless blade change allows quick blade
change without touching blade or recipro-
cating shaft.
• Electric brake reduces coast time.
• Compact and lightweight
• Pivoting shoe with open top for maximum
visibility.
• Blade reverses for upside down cutting
• Variable speed with trigger lock for more
precise cutting.
• KIT Includes (2) batteries, 1 hour charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Strokes/Min: 0-2,700 spm
Stroke Length: 7/8" rpm
Weight: 6.0 lbs.
Part No. Description
DW937K 14.4V Reciprocating Saw Kit
14.4
VOLT
NiCd
DW937K
14.4V
NiCad Cut-Out
Tool
• Tool-free bit change
for fast and easy bit
changing without a
wrench
• 26,000 rpm motor
provides more cutting
power
• Dust sealed switch
provides durability
and long switch life
• KIT Includes (2) bateries, 1 hour char-
ger, (1) general purpose bit, (1) drywall
cutting bit, ¼" & 1
⁄
8" collets & impact-
resistant case.
Specifications
Volts: 14.4 V DC
No Load Speed: 26,000 rpm
Collet Dia.: 1/4", 1/8"
Adjustable Guide: Yes
Weight: 4.5 lbs.
Part No. Description
DC551KA 14.4V Cut-Out Tool Kit
14.4
VOLT
NiCd
DC551KA
14.4V NiCad 1/4" Hex
Shank Impact Wrench Kit
• Compact size & weight allows access into
tighter areas and reduces user fatigue.
• 1,550 in-lbs of max torque to perform a
wide range of fastening applications.
• 0-2,400 rpm/0-3,000 bpm for faster ap-
plication speed.
• Textured ant-slip comfort grip provides
maximum comfort.
• Durable magnesium gear case and all
metal transmission for extended durability.
• Heavy duty impacting mechanism directs
torque to fastener without kickback.
• KIT Includes (2) batteries, 1 hou.r charger,
& impact-resistant case.
Specifications
Volts: 14.4 V DC
Drive Size: 1/2" Square Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 103 ft.-lbs.
Weight: 3.9 lbs.
Part No. Description
DC835KA 14.4V 1/4" Cordless
Impact Driver Kit
14.4
VOLT
NiCd
DC835KA
14.4V NiCad Swivel Head Shear
• Head swivels 360º, allows user to access
tight quarters while maintaining comfort
• Cuts 7/32" strip which continuously curls
out of the cutting area providing consis-
tent and accurate cuts
• KIT Includes (2) batteries, 1 hour charger,
blade wrench & impact-resistant case.
Specifications
Volts: 14.4 V DC
Strokes/Min: 0-2,300 spm
Min. Cutting Radius: 5.5"
Capacity in steel: 18-28 ga.
Weight: 5.8 lbs.
Part No. Description
DW941K 14.4V Swivel Head Shear
Kit
14.4
VOLT
NiCd
DW941K
DC830KA
287
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
12V NICAD CORDLESS
12V NiCad
1/4" Hex Shank Impact
Driver Kit
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
Specifications
Volts: 12 V DC
Drive Size: 1/4" Hex
Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 96 ft.-lbs.
Weight: 3.6 lbs.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Part No. Description
DC845KA 12V 1/4" Hex
Impact Driver Kit
DW965K-2
12V NiCad 3/8" Right Angle
Drill Kit
• Multi-grip trigger provides comfort and conve-
nience allowing the user to get into tight spaces
• Variable speed and reversing gives the user
the ability to control speed
• Durable, right angle transmission with sealed
ball bearing provides a longer tool life
Specifications
Volts: 12 V DC
Max. Power: 186 UWO
# of Speed Settings: 2
Max RPM: 0-400/0-1,200
Weight: 4.1 lbs
Part No. Description
DW965K-2 12V Right-Angle Drill Kit
12
VOLT
NiCd
12V NiCad
3/8" Impact Wrench Kit
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 12 V DC
Drive Size: 3/8" Sq.
Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 105 ft.-lbs.
Weight: 3.65 lbs.
Part No. Description
DC841KA 12V 3/8" Impact
Wrench Kit
12
VOLT
NiCd
DC841KA
12V NiCad
1/2" Impact Wrench Kit
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip
provides maximum comfort.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 12 V DC
Drive Size: 1/2" Sq.
Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 120 ft.-lbs.
Weight: 3.6 lbs.
Part No. Description
DC840KA 12V 1/2" Impact
Wrench Kit
12
VOLT
NiCd
DC840KA
12V NiCad
Drill/Driver Kit
• Heavy-duty 1/2" ratcheting
chuck
• Superior ergonomics opto-
mize optimal balance, size
and weight.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 12 V DC
Max. Power: 285 UWO
# of Speed Settings: 3
Max RPM: 0-450/0-1,450
0-1,800 RPM
Clutch Settings: 22
Weight: 5. lbs
Part No. Description
DC940KX 12V Drill/Driver
Kit
12
VOLT
NiCd
DC940KX
12V NiCad
Compact Drill/Driver Kit
• Compact Size: fits into the
tightest conditions.
• 3/8"single sleeve keyless
ratcheting chuck for tighter
bit grip.
• Superior ergonomics opto-
mize optimal balance, size
and weight.
• KIT Includes (2) batteries, 1
hour charger, double-ended
& impact-resistant case.
Specifications
Volts: 12 V DC
Max. Power: 230 UWO
# of Speed Settings: 2
Max RPM: 0-450/0-1,450
Clutch Settings: 17
Weight: 3.9. lbs
Part No. Description
DC727KA 12V Compact
Drill/Driver Kit
12
VOLT
NiCd
DC727KA
12
VOLT
NiCd
DC845KA
COMPACT
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
288 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
9.6V NiCd
3/8" Right Angle Drill Kit
• Multi-grip
trigger
provides
comfort and
convenience
allowing the
user to get
into tight
spaces
• Variable
speed and
reversing
gives the
user the abil-
ity to control
speed
• Durable, right angle transmis-
sion with sealed ball bearing
provides a longer tool life
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdriver bit & impact-
resistant case.
Specifications
Volts: 9.6 V DC
Max. Power: 130 UWO
# of Speed Settings: 2
Max RPM: 0-400/0-1,100
Clutch Settings: 2
Weight: 3.9. lbs
Part No. Description
DW955K-2 9.6V Right -
Angle Drill/
Driver kit
9.6V - 7.2V NICAD CORDLESS
Universal Chargers NiCad Battery Packs - 12V - 9.6V - 7.2V
9.6
VOLT
NiCd
DW9109
DW9216
DC9310
DW9117
7.2
VOLT
NiCd
7.2V NiCd
2-Position Screwdriver
Kit
• Superior power to weight
ratio in a variety of fastening
applications.
• Adjustable 2-position handle
allows for operation as both
in-line and pistol-grip.
• Variable speed and reversing
trigger switch.
• Industrial quick-release hex-
shank chuck.
• Electric brake provides in-
creased productivity
• Heavy-duty metal hinge pro-
vides secure and sustained
two-position lock.
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdrivewr bit & impact-
resistant case.
Specifications
Volts: 7.2 V DC
No Load Speed: 0-500 RPM
Max Torque: 80 in.-lbs.
Weight: 3.5. lbs
Part No. Description
DW920K-2 7.2V 2-Position
Screwdriver Kit
DW920K-2
9.6V NiCad
1/4" Hex Shank Impact
Driver Kit
• Compact size & weight allows
access into tighter areas.
• Textured ant-slip comfort grip.
• Durable magnesium gear case
and all metal transmission for
extended durability.
• Heavy duty impacting
mechanism directs torque to
fastener without kickback.
• KIT Includes (2) batteries, 1
hour charger, & impact-resis-
tant case.
Specifications
Volts: 9.6 V DC
Drive Size: 1/4" Hex
Drive
No Load Speed: 0-2,400 rpm
Impacts/min: 0-2,700 ipm
Max Torque: 80 ft.-lbs.
Weight: 3.3 lbs.
Part No. Description
DC855KA 9.6V 1/4" Hex
Impact Driver Kit
9.6
VOLT
NiCd
D855KA
9.6V NiCad
3/8" Drill/Driver Kit
• Heavy-duty 3/8'' single sleeve
ratcheting chuck for tighter
bit gripping ability.
• Dual speed range delivers
maximum versatility.
• 15-position adjustable clutch.
• Rubber grip for maximum
comfort.
• Compact size and lightweight
design
• KIT Includes (2) batteries, 1
hour charger, double-ended
screwdriver bit & impact-
resistant case.
Specifications
Volts: 9.6 V DC
Max. Power: 130 UWO
# of Speed Settings: 2
Max RPM: 0-300/0-1,100
Clutch Settings: 15
Weight: 3.4. lbs
Part No. Description
DC750KA 9.6V Drill/Driver
Kit
9.6
VOLT
NiCd
DC750KA
• Charges DEWALT® 7.2V - 18V
NiCd and NiMH batteries.
• 3-Stage Charging System,
Thermal Protection and LED
Diagnostic indicators provides
maximum run-time and ex-
tends overall life of the battery.
Part No. Description
DC9310 18V Charger
DW9216 18V Dual-Port
Charger
DW9117 18V 15 min.
Charger
DW9109 18V Charger
Vehicle Charger
Part No. Description
DC9071 12V NiCd Battery
Pack
DW9061 9.6V NiCd
Battery Pack
DW9057 7.2V NiCd
Battery Pack
289
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDLESS JOBSITE UTILITY
18V Pivoting
Head Flashlight
• Wide angle
beam
• Head rotates
90°
• Lightweight,
compact
design
• Battery/
Charger not
included
Part No. Description
DW908 18V Flashlight
18V Fluorescent
Area Light
• Built-in hook
allows hanging.
• Over-molded lens
• 13W fluorescent
bulb
• Lightweight, com-
pact design
• Battery/Charger
not included
Part No. Description
DC515 18V Fluorescent
Area Light
Worklight/Char-
ger w/GFCI Protection
• Cordless/corded 38W fluo-
rescent worklight runs on
12-18V DeWalt batteries or
AC power to provide area
lighting.
• 1 hour dual port battery
charger charges (2) DeWalt
7.2-18V batteries (NiCad).
• (3) GFCI protected power
outlets.
• Spring loaded battery hold
down keeps batteries secure.
• Quick and easy fold-up, trans-
port and storage.
Part No. Description
DC022 Worklight/Dual-
Port Charger
36V, 28V & 18V
Floodlights
• Flex neck design with lock-
able head clips.
• Wide angle beam of light.
• 8 hours run-time on a single
charge.
Battery/Charger not included
Part No. Description
DC509 36V Floodlight
DC519 28V Floodlight
DW919 18V Floodlight
DC509
DC519 DC919
Lighting
Worklight
• Clip-Lok™
system ready.
• 140° pivot-
ing head.
Part No.
Description
49-24-0185 V28 Li-Ion
Work Light
12V Li-Ion
Worklights
Hands-free light in a compact
and lightweight package. Both
lights feature a 90° rotating
head. Integrated magnet pro-
vides hands-free use.
Worklight
49-24-0145
• Xenon incandes-
cent bulb
LED Worklight
49-24-0146
• 90-degree pivot-
ing aluminum head –
Impact and weather
resistant
• LED lights provide
2X brighter light and
runs twice as long as
incandescent bulbs
Lights do not include M12™
battery or charger
Part No. Description
49-24-0145 Cordless Xenon
Worklight
49-24-0146 Cordless LED
Worklight
18V Li-Ion
Worklights
• Ergonomic, compact, and
lightweight design
• Fold-away utility hook
• 135 degree rotating head
Part No. Description
2735-20 M18 LED
Worklight
49-24-0171 M18 Worklight
49-24-01712735-20
Lighting
Worksite Radio Charger
• Runs on and charges 7.2V to 18V NiCad
batteries.
• AM/FM Digital tuner,on LCD display, built-
in clock, and 8 station memory presets.
• Auxiliary port allows connection to CD
players, MP3 players, iPods, with an
audio cable. (Cable not included).
Part No. Description
DC011 Worksite Radio Charger
Job Site Radio
Only 11" x 6.5" x 4",
this weather-resistant
radio features an
advanced digital tuner
and is compatable with
iPod® and MP3 players.
FEATURES:
• 10 Station Presets
• Equalizer
• Digital Display
• Storage compartment for iPod/MP3 player.
• Powered by M12 Li-Ion battery, AAA
Alkaline batteries or AC cord. (M12 bat-
tery & charger NOT included).
Part No. Description
2590-20 M12 Job Site Radio
Jobsite Radio
• AM/FM Tuner,
• Weather sealed
compartment -
Protects MP3 play-
ers and other audio
devices
• ABS polymer
and steel construction protects against
weather and abusive job site conditions
• Equalizer and 10-station presets
• Runs on Milwaukee M12™, M18™, V18™,
V28® , NiCd 12V to 28V, and 120V AC.
• 12V DC Output - Provides power to
charge most small electronic devices
Part No. Description
2790-20 M18 Jobsite Radio
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
290 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDLESS BATTERIES AND CHARGERS
To ensure the maximum life of a NiCad battery pack, there are some guidelines which must be followed as general maintenance.
• Batteries perform best if charged at room temperatures. Do not charge in temperatures below 40°F or above 105°F. Under these conditions, the battery will
not take a full charge and may be permanently damaged. Store the battery in a cool, dry place. Temperatures exceeding 120°F may reduce the battery life.
• If the battery is hot, let it sit out of the charger for a least 2 hours until it is at room temperature.
• Do not try to discharge the battery beyond the point where the tool no longer performs with the power and torque needed for the job, this cause perma-
nent damage which will prevent the battery from taking a full charge.
• Periodically charge the battery overnight to take full advantage of the 3-Stage Charging System for optimum runtime and battery life.
Batteries Part No. Voltage Description Charger(s) Part No. Description
DW9057
(NiCad) 7.2V
Entire line of DeWalt 7.2V
NiCad Cordless Tools
(Except Univolt® line)
DW9310
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DW9061
(NiCad) 9.6V
Entire line of DeWalt 9.6V
NiCad Cordless Tools
(Except Univolt® line)
DW9216
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DC9071
(NiCad) 12V
Entire line of DeWalt 12V
NiCad Cordless Tools
(Except Univolt® line)
DC9117
7.2V - 18V
Universal
Nicad/NiMh/
Li-Ion Charger
DC9091
(NiCad) 14.4V
Entire line of DeWalt 14.4V
NiCad Cordless Tools
(Except Univolt® line)
DW9109
7.2V - 18V
Universal
Vehicle
Nicad/NiMh/
Li-Ion Charger
DC9096
(NiCad) 18V
Entire line of DeWalt 18V
NiCad Cordless Tools
(Except Univolt® line)
Batteries Part No. Voltage Description Charger(s) Part No. Description
DC9180
(Li-Ion) 18V
Entire line of DeWalt 18V
NANO™ Li-Ion and NiCad
Cordless Tools DC9310
DC9216
(Dual-Port)
7.2V - 18V
Universal
Nicad/NiM h/
Li-Ion Charger
COMPACT
DC9181
(Li-Ion)
18V
Entire line of DeWalt 18V
NANO™ Li-Ion and NiCad
Cordless Tools
DW0242
(NiCad) 24V Entire line of DeWalt 24V
NiCad Cordless Tools
DW0246
DW0249
24V Fan
Cooled Charger
24V Fan-
Cooled Vehicle
Charger
DC9280
(Li-Ion) 28V
Entire line of DeWalt 28V
NANO™ Li-Ion
Cordless Tools
DC9000
28V - 36V
NANO™ Li-Ion
Charger
DC9360
(Li-Ion) 36V
Entire line of DeWalt 28V
NANO™ Li-Ion
Cordless Tools
291
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDLESS BATTERIES AND CHARGERS
Batteries Part No. Voltage Description Charger(s) Part No. Description
48-11-0100
(NiCad) 2.4V Entire line of Milwaukee
2.4V NiCad Cordless Tools 48-59-0300 2.4V NiCad
Charger
48-11-0080
(NiCad) 9.6V Entire line of Milwaukee
9.6V NiCad Cordless Tools 48-59-0192
48-59-0172
(Vehicle)
9.6V - 12V
NiCad Charger
48-11-0200
(NiCad) 12V
Entire line of Milwaukee 12V
NiCad Cordless Tools
(Except PowerPlus Models)
48-11-1970
(NiCad) 12V
Entire line of Milwaukee 12V
NiCad "Slide-On" Battery
Style Cordless Tools
48-59-0255
48-59-0186
(Vehicle)
12V, 14.4V,
18V NiCad
Charger
48-11-2401
(Li-Ion) 12V Entire line of Milwaukee 12V
M12 Li-Ion Cordless Tools 48-59-2401
2510-10
(Wall/Vehicle
Charger)
12V Li-Ion
Charger for
M12 Series
Tools
High Capacity
(XC)
48-11-2402
(Li-Ion)
12V
Entire line of Milwaukee 12V
M12 Li-Ion Cordless Tools
(Except M12 Plumb Laser &
Sub-Scanner™ Tools)
48-11-1014
48-11-1024
(NiCad)
14.4V Entire line of Milwaukee
14.4V NiCad Cordless Tools 48-59-0255
48-59-0186
(Vehicle)
12V, 14.4V,
18V NiCad
Charger
48-11-2230
48-11-2232
(NiCad)
18V Entire line of Milwaukee 18V
NiCad Cordless Tools
COMPACT
48-11-1815
(Li-Ion)
18V
Entire line of Milwaukee 18V
Li-Ion M18 Cordless Tools
(NOT compatible with V18)
48-59-1801
18V Li-Ion
Charger for
M18 Series
Tools
High Capacity
(XC)
48-11-1815
(Li-Ion)
18V
Entire line of Milwaukee 18V
Li-Ion M18 Cordless Tools
(NOT compatible with V18)
V18 Series
48-11-1830
(Li-Ion)
18V
Entire line of Milwaukee 18V
V18 Li-Ion Cordless Tools
and ALL 18V NiCad Tools
48-59-2818
18V & 28V
Li-Ion Char-
ger AND 18V
NiCad Batteries
M28 (V28)
48-11-2830
(Li-Ion)
28V Entire line of Milwaukee 28V
V28 Li-Ion Cordless Tools 48-11-1833
Battery/Charger
Combo Pack
Incl. (2) V18
Batteries
MILWAUKEE
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
292 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED DRILLS
Pistol Grip Drills
6.0 Amp 3/8" VSR® Drill
• All ball-bearing construction provides greater durability and longer tool life.
• Contoured textured handle provides better gripping surface and reduces user fatigue.
• Glass-filled nylon housing is durable and impact resistant.
• Belt clip conveniently holds tool and frees user's hands for other work.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 3/8" Spindle: 3/8 "- 20
Amps: 6.0 Max Watts Out: 480 W
No Load Speed: 0-2500 rpm Weight: 3.2 lbs.
Part No. Description
D21002 3/8" VSR® Drill
D21002
7.0 Amp 1/4" Magnum® Drill
• Trigger speed control with reversing.
• Heavy-Duty keyed chuck.
• All-metal gear case.
• 8 ft. 3-wire Quik-Lok® cord with easy detachment for storage and service
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/4" Spindle: 3/8" - 24
Amps: 7.0 Trigger Lock: On
No Load Speed: 0-4000 rpm Weight: 3.8 lbs.
Part No. Description
0101-20 1/4" Magnum Drill
0101-20
6.0 Amp 3/8" VSR® Drill Kit w/Keyless Chuck
• 3/8" ratcheting keyless chuck offers greater bit retention.
• All ball-bearing construction for greater durability.
• Contoured textured handle provides better gripping surface and reduces user fatigue
• Built-in two-way level for drilling accurate vertical and horizontal holes
• Glass-filled nylon housing is durable and impact resistant.
Specifications
Volts: 120 V AC Chuck Type: Keyless
Chuck Size: 3/8" Spindle: 3/8" - 24
Amps: 6.0 Max Watts Out: 480
No Load Speed: 0-2,500 rpm Weight: 3.5 lbs.
Part No. Description
D21008K 3/8" VSR® Drill w/keyless chuck
D21008K
6.0 Amp 3/8" VSR® Drill w/ Metal Keyless Chuck
• All-metal chuck offers greater durability
• All ball-bearing construction for greater durability.
• 3/8" metal keyless chuck offers greater bit retention
• Contoured textured handle provides better gripping surface and reduces user fatigue
• Built-in two-way level for drilling accurate vertical and horizontal holes
• Glass-filled nylon housing is durable and impact resistant.
Specifications
Volts: 120 V AC Chuck Type: Keyless
Chuck Size: 3/8" Spindle: 3/8" - 24
Amps: 6.0 Max Watts Out: 480
No Load Speed: 0-2,500 rpm Weight: 3.5 lbs.
Part No. Description
D21009 3/8" VSR® Drill w/metal keyless chuck
D21009
293
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED DRILLS
7.8 Amp 1/2" VSR® Drill
• Helical-cut steel, heat-treated gears for increased durability and long gear life.
• Metal gear housing for durability and increased reliability.
• 2-finger trigger for increased comfort.
• 360° side handle for greater control and versatility.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 7.8 Max Watts Out: 600 W
No Load Speed: 0-850 rpm Weight: 4.2 lbs.
Part No. Description
DW235G 1/2" VSR® Drill DW235G
7.0 Amp 3/8" Magnum® Drills
• 7.0 amp motor,
• Features a heavy-duty keyed chuck.
• All-metal gear case.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 3/8" Spindle: 3/8 "- 20
Amps: 7.0 Trigger Lock: Yes
No Load Speed: 0-1200 rpm Weight: 4.2 lbs.
Part No. Description
0200-20 3/8" Magnum Drill w/keyed chuck
0200-20
7.0 Amp 3/8" Magnum® Drills
• 7.0 amp motor,
• Features 2-sleeve keyless chuck.
• All-metal gear case.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 3/8" Spindle: 3/8 "- 20
Amps: 7.0 Trigger Lock: Yes
No Load Speed: 0-1200 rpm Weight: 4.1 lbs.
Part No. Description
0201-20 3/8" Magnum Drill w/keyless chuck
0201-20
5.5 Amp 1/2" Magnum® Drill
• Trigger speed control with reversing
• Heavy-Duty industrial chuck
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 5.5 Trigger Lock: Yes
No Load Speed: 0-850 rpm Weight: 4.8 lbs.
Part No. Description
0234-6 1/2" Magnum Drill
0234-6
Pistol Grip Drills
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
294 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED DRILLS
9.0 Amp 1/2" Spade Handle Drill
• Variable speed reversing switch avoids air bubbles when mixing mud and offers greater
control when drilling
• Increased torque for drilling and mud mixing
• Soft grip handle provides superior comfort and ergonomics.
• 2-position rear spade handle and 3-position side handle gives greater control for all drilling
and mixing applications.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Max Watts Out: 600
Amps: 9.0 Weight: 7.5lbs.
No Load Speed: 0-0-550 rpm
Part No. Description
DW130V 1/2" VSR® Spade Handle Drill
DW130V
0299-6
Pistol Grip Drills, Spade Handle Drills
8.0 Amp 1/2" Magnum® Drills
• Features an Ergonomic Tactile Grip
• Trigger speed control with reversing.
• Heavy-duty keyed chuck.
• All-metal gear case
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 8.0 Trigger Lock: Yes
No Load Speed: 0-850 rpm Weight: 5.4 lbs.
Part No. Description
0300-20 1/2" Magnum Drill w/Ergonomic Tactile Grip
0300-20
8.0 Amp 1/2" Magnum® Drill
• Trigger speed control with reversing.
• Heavy-Duty keyed chuck.
• All-metal gear case.
• Exclusive brush cartridge system changes brushes in less than one minute.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 8.0 Trigger Lock: Yes
No Load Speed: 0-850 rpm Weight: 5.4 lbs.
Part No. Description
0299-6 1/2" Magnum Drill
8.0 Amp 1/2" Magnum® Drills
• Features an Ergonomic Tactile Grip
• Trigger speed control with reversing.
• Heavy-duty keyed chuck.
• All-metal gear case
• features ratcheting chuck with carbide jaws for 2X grip strength on bit
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 8.0 Trigger Lock: Yes
No Load Speed: 0-850 rpm Weight: 5.6 lbs.
Part No. Description
0302-20 1/2" Magnum Drill w/Ergonomic Tactile Grip and Ratcheting Chuck
0302-20
295
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED DRILLS
33° Angle Drive Kit
• For drill models 1001-1, 1007-
1, 1101-1, 1107-6 & 1250-1.
Part No. Description
48-06-2860 33° Angle Kit
30" Extension
• For drill models 1001-1, 1007-1, 1101-1, 1107-6 & 1250-1.
• Extends drill reach up to 30", Use with RAD Kit 48-06-2871
Part No. Description
48-95-0400 30" Extension
D-Handle, Right Angle (R.A.D) Drills
1/2" Right Angle Drill Kit
• Three speed ranges.
• Die-cast metal gear housing for durability & reliability.
• 5-position side handle.
• 360° right angle attachment improves access to confined areas.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 7.0 Max Watts Out: 580
No Load Speed: 400 / 600 / 900 rpm Weight: 9.75 lbs.
Part No. Description
DW120K 1/2" Right Angle Drill
DW120K
7.0 Amp 1/2" D-Handle Drills
• 1/2 in. capacity in steel. • Powerful 7 amp Milwaukee built motor.
• Trigger speed control, reversing. • Double gear reduction.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 7.0 Trigger Lock: On
No Load Speed: 0-1000 rpm Weight: 6.5 lbs.
Part No. Description
1250-1 1/2" D-Handle Drill
1250-1
7.0 Amp 1/2" D-Handle Drills
• 1/2 in. capacity in steel. • Powerful 7 amp Milwaukee built motor.
• Trigger speed control, reversing. • Double gear reduction.
• Includes chuck key, rubber key holder and side handle.
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/2" Spindle: 1/2" - 20
Amps: 7.0 Trigger Lock: On
No Load Speed: 0-500 rpm Weight: 6.8 lbs.
Part No. Description
1107-6 1/2" D-Handle Drill
1107-6
1/2" Right Angle Drill
• 1/2" capacity in steel, handles up to a 2-9/16" selfeed bit
• Two speeds: 335 and 750 rpm w/ R.A.D. Attachment
• Powerful 7 amp motor
• Head and handle swivel 360°
Specifications
Volts: 120 V AC Chuck Type: Keyed
Chuck Size: 1/4" Spindle: 1/2" - 20
Amps: 7.0 Trigger Lock: On
No Load Speed: 0-500 rpm Weight: 10.3 lbs.
Part No. Description
3102-6 1/2" Right Angle Drill, Plumbers Kit
3107-6 1/2" Right Angle Drill
3107-6
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
296 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED DRILLS
1/2" Compact Drills
• 1/2 in. capacity in steel.
• Extra long switch and pipe
handle for maximum leverage.
• Rear mounted assist spade
handle.
• Reversing.
• Powerful 7 amp motor.
• Heat treated gears are Helical-
Cut for quiet performance.
1610-1 Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 7.0
No Load Speed: 650 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 11.2 lbs.
1630-1 Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 7.0
No Load Speed: 900 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 11.2 lbs.
1660-1 Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 7.0
No Load Speed: 450 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 11.2 lbs.
3/4" Large Drill
• 3/4 in. capacity in steel
• 350 rpm, reversing
• Powerful 10 amp motor
• #3 Jacobs taper spindle.
Specifications
Volts: 120 V AC
Chuck Size: 3/4"
Amps: 10.0
No Load Speed: 115-450 rpm
Chuck Type: Keyed
Spindle: #3 J.T.
Weight: 19 lbs.
Part No. Description
1854-1 3/4"" Large Drill
350 rpm
1/2" Super-Hawg® Drill
• Clutch in low speed
• High operating speeds for
maximum productivity
• 90° left-right, Roto-Lok®
handle for maximum operat-
ing comfort
• Easy turn gear shift knob
• Comfort grip switch handle
and gear case with front T-
bar handle.
Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 13
No Load Speed: 450/1750 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 14.7 lbs.
Part No. Description
1680-21 1/2" Super-Hawg®
(incl. Carrying Case)
1610-1
1630-1
1660-1
1663-1
Hole-Hawgs®
1854-1
1680-21
Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 7.0
No Load Speed: 115-450 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 11.9 lbs.
Part No. Description
1610-1 1/2" Compact Drill
650 rpm
1630-1 1/2" Compact Drill
900 rpm
1660-6 1/2" Compact Drill
450 rpm
1663-1 1/2" Compact Drill
115-450 rpm
1/2" Hole-Hawg® Drill
• Compact design for drilling be-
tween studs and joists.
• 2-position Pipe Handle, 3-position
spade handle.
• 2-speed gear shift.
• Can power up to 4-5/8" Self-feed
bit in low speed and drill up to
1-3/8" Self-feed bit in high speed.
Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 7.5
No Load Speed: 300/1200 rpm
Chuck Type: Keyed
Spindle: 5/8" - 16
Weight: 11.5 lbs.
1675-6
Part No. Description
1675-6 1/2" Hole-Hawg®
1676-6 1/2" Hole-Hawg® (incl. Carrying Case)
DWD460K
1/2" VSR Stud
& Joist Drill
• Bind-Up Control stall sens-
ing for increased control of
reactionary torque.
• 11 amp motor.
• Two speed ranges.
• Mechanical clutch in low
speed for increased gear
protection.
• Metal gear housing for dura-
bility & reliability.
• Adjustable front handle and
2-position side handle.
• 360° right angle attachment
improves access to confined
areas.
• Includes chuck key with holder,
2-position side handle, bail
handle and case.
Specifications
Volts: 120 V AC
Chuck Size: 1/2"
Amps: 11.0
Max Watts Out: 1015
No Load Speed: 330/1300 rpm
Chuck Type: Keyed
Capacity in Wood:
Spade Bit: 1-1/2"
Self-Feed: 4-5/8"
Hole Saw: 6"
Auger Bit: 1-1/2"
Capacity in Steel:
Twist Bit: 1/2"
Hole Saw: 5"
Weight: 11.75 lbs.
Part No. Description
DWD460K 1/2" VSR Stud &
Joist Drill
297
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED DRILLS / DRILL BIT SETS
3/8" Close Quarter Drill
• Metal framed gear train for
longer gear life.
• Large paddle trigger for
smooth control and easy grip
in any position.
• Angled chuck for reaching
close quarters other drills
cannot reach.
• Textured palm grip reduces
slipping.
Specifications
Volts: 120 V AC
Chuck Size: 3/8"
Amps: 3.5
No Load Speed: 0-1,300 rpm
Chuck Type: Keyed
Spindle: 1/2" - 20
Weight: 3.9 lbs.
Part No. Description
0370-20 3/8" Close Quarter
Drill
3/8" VSR®
Right Angle Drill
• 100% ball-bearing construc-
tion provides durability and
longer tool life.
• Compact right-angle design for
easy access in tight places.
• Paddle switch is ideal for use
in awkward positions and
limited access areas.
• Shielded chuck protects user &
improves grip in confined areas.
• Double gear reduction in-
creases torque performance
and decreases gear stress.
Specifications
Volts: 120 V AC
Chuck Size: 3/8"
Amps: 3.7
No Load Speed: 0-1,200 rpm
Chuck Type: Keyed
Max Watts Out: 200 W
Weight: 3.75 lbs.
Part No. Description
DW160V 3/8" VSR® Right
Angle Drill
DW160V
0370-6
Close Quarter / Right Angle Drills Pilot Point Gold Ferrous
Oxide Twist Drill Bit Sets
• Starts on contact for clean,
accurate holes.
• No-spin shank eliminates bit
spinning in chuck
• All sets packaged in DeWalt's
Tough-Case™
Part No. Description
DW1169 14-pc. set, Sizes 1/16" through 3/8" by 64th's
DW1956 16-pc. set, Sizes 1/16" through 1/2" by 64th's
DW1958 18-pc. set, Sizes 1/16" through 1/2" by 64th's
DW1969 29-pc. set, Sizes 1/16" through 1/2" by 64th's
Thunderbolt®
Black Oxide Drill Bit Sets
• Thunderbolt® web, provides longer life
and faster drill times.
• Parabollic flute, clears chips faster.
• 135° split point, precision start no
walking.
• 3-Flat Secure Grip Shank, reduces bit
slipping in chuck.
Part No. Description
48-89-2800 14-pc. set, Sizes 1/16" through 1/2" by 32nd's
48-89-2803 15-pc. set, Sizes 1/16" through 3/8" by 64th's
48-89-2801 21-pc. set, Sizes 1/16" through 1/2" by 64th's
48-89-2802 29-pc. set, Sizes 1/16" through 1/2" by 64th's
Jobber Length Cobalt Twist Drill Sets
• Cobalt, drills easily through tough alloys
• Abrasive and heat resistant
• Heavy-duty 135° split point for easy starting on hard materials
Part No. Set Size Description
48-89-0025 15-Pc Cobalt 1/16 - 1/2 by 32nds
48-89-0045 13-Pc Cobalt 1/16 - 1/4 by 64ths
48-89-0025
48-89-0045
Part No. Description
CCT7128P 8-piece silver and Deming sets in plastic case
No. 712
8-Piece Silver and Deming
Sets in Plastic Case
Includes 9/16”, 5/8”,11/16”, 3/4”,
13/16”, 7/8”, 15/16”, 1”, 1/2” Shank
Part No. Description
CCT115SP 115SP Split point
Micro Drills
15-Piece Sets
1/16 thru 1/2 x 32nds
Part No. Description
CCT129SP #705 SP Split point
CCT129SPSM #1705 screw machine length
29-Piece Sets
1/16 thru 1/2 x 64ths
Twist Drill Bits - Sets
298 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Pilot Point Gold Ferrous Oxide Twist Drill Bits
• Starts on contact for clean, accurate holes.
• No-spin shank eliminates bit spinning in chuck
Part No. Qty/Card Size Style
DW1904B 12 1/16" Spilt Point®
DW1905B 12 5/64" Spilt Point®
DW1906B 12 3/32" Spilt Point®
DW1907B 12 7/64" Spilt Point®
DW1908B 12 1/8" Pilot Point®
DW1909B 12 9/64" Pilot Point®
DW1910B 12 5/32" Pilot Point®
DW1911B 12 11/64" Pilot Point®
DW1913B 12 3/16" Pilot Point®
DW1914B 12 7/32" Pilot Point®
DW1915B 12 15/64" Pilot Point®
DW1916B 12 1/4" Pilot Point®
DW1917B 12 17/64" Pilot Point®
DW1918B 12 9/32" Pilot Point®
DW1919B 12 19/64" Pilot Point®
DW1920B 65/16" Pilot Point®
DW1921B 621/64" Pilot Point®
DW1922B 611/32" Pilot Point®
DW1923B 623/64" Pilot Point®
DW1924B 63/8" Pilot Point®
DW1925B 625/64" Pilot Point®
DW1926B 613/32" Pilot Point®
DW1927B 627/64" Pilot Point®
DW1928B 67/16" Pilot Point®
DW1929B 629/64" Pilot Point®
DW1930B 615/32" Pilot Point®
DW1931B 631/64" Pilot Point®
DW1932B 61/2" Pilot Point®
DRILL BITS
Thunderbolt® Black Oxide Drill Bits
• Thunderbolt® web, provides longer life and faster drill times.
• Parabollic flute, clears chips faster.
• 135° split point, precision start no walking.
• 3-Flat Secure Grip Shank, reduces bit slipping in chuck.
Dia. Part No.
1/16" 48-89-2710
5/64" 48-89-2711
3/32" 48-89-2712
7/64" 48-89-2713
1/8" 48-89-2714
9/64" 48-89-2715
5/32" 48-89-2716
11/64" 48-89-2717
3/16" 48-89-2718
13/64" 48-89-2719
7/32" 48-89-2720
15/64" 48-89-2721
1/4" 48-89-2722
Dia. Part No.
17/64" 48-89-2723
9/32" 48-89-2724
19/64" 48-89-2725
5/16" 48-89-2726
21/64" 48-89-2727
11/32" 48-89-2728
23/64" 48-89-2729
3/8" 48-89-2730
25/64" 48-89-2731
13/32" 48-89-2732
27/64" 48-89-2733
7/16" 48-89-2734
15/32" 48-89-2736
1/2" 48-89-2738
XL5 Series Jobber Drill Bits
The Best Choice for Stainless Steel
For high performance drilling in both portable and fixed
operations. Self-centering 135° split point.
EDP No./Dia.
XL5-9/32"
XL5-19/64"
XL5-5/16"
XL5-21/64"
XL5-11/32"
XL5-23/64"
XL5-3/8"
EDP No./Dia.
XL5-25/64"
XL5-13/32"
XL5-27/64"
XL5-7/16"
XL5-29/64"
XL5-15/32"
XL5-32/64"
XL5-1/2"
EDP No./Dia.
XL5-1/16"
XL5-5/64"
XL5-3/32"
XL5-7/64"
XL5-1/8"
XL5-9/64"
XL5-5/32"
EDP No./Dia.
XL5-11/64"
XL5-3/16"
XL5-13/64"
XL5-7/32"
XL5-15/64"
XL5-1/4"
XL5-17/64"
Diameter Shank Overall
Part No. (in) Dia. (in) Length (in)
48-27-0251 1/4 3/16 6-3/16
48-27-0311 5/16 3/16 6-3/16
48-27-0371 3/8 1/4 6-1/16
48-27-0441 7/16 1/4 6-1/16
48-27-0501 1/2 1/4 6-1/8
48-27-0561 9/16 1/4 6-1/8
48-27-0621 5/8 1/4 6-1/8
48-27-0681 11/16 1/4 6-1/8
48-27-0751 3/4 1/4 6-3/8
48-27-0811 13/16 1/4 6-1/8
48-27-0871 7/8 1/4 6-1/8
48-27-0941 15/16 1/4 6-3/16
48-27-1001 1 1/4 6-3/16
48-27-1121 1-1/8 1/4 6-3/8
48-27-1251 1-1/4 1/4 6-3/8
48-27-1371 1-3/8 1/4 6-3/8
48-27-1501 1-1/2 1/4 6-3/8
48-27-1501 12" Boring Bit Extension for 1/4" shank bits
Flat Boring Bits and Extensions
1/4” to 1-1/2” Diameters
Flat Boring Bit Sets
Part No. Description
49-22-0175 8-pc. QUIK-LOK set, w/ Quick-Change Extension
49-22-0185 6-pc. QUIK-LOK Stubby set, w/ Quick-Change Extension
49-22-0171 6-pc. set, Sizes 3/8" through 1"" by 1/8th's
49-22-0185 QUIK-LOK® STUBBY SET
299
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DRILL BITS
High Speed Steel Fractional Drill Bits
Part No. Size
1DHSD 1/64"
3DHSD 1/32"
4DHSD 3/64"
6DHSD 1/16"
7DHSD 5/64"
9DHSD 3/32"
10DHSD 7/64"
12DHSD 1/8"
14DHSD 9/64"
15DHSD 5/32"
Part No. Size
17DHSD 11/64"
18DHSD 3/16"
20DHSD 13/64"
21DHSD 7/32"
23DHSD 15/64"
25DHSD 1/4"
26DHSD 17/64"
28DHSD 9/32"
29DHSD 19/64"
31DHSD 5/16"
32DHSD 21/64"
Part No. Size
34DHSD 11/32"
35DHSD 23/64"
37DHSD 3/8"
39DHSD 25/64"
40DHSD 13/32"
42DHSD 27/64"
43DHSD 7/16"
45DHSD 29/64"
46DHSD 15/32"
48DHSD 31/64"
50DHSD 1/2"
Aircraft Drills
Part No. Size
12D600ADB 1/8" x 6"
15D600ADB 5/32" x 6"
18D600ADB 3/16" x 6"
21D600ADB 7/32" x 6"
25D600ADB 1/4" x 6"
25D1200ADB 1/4" x 12"
37D600ADB 3/8" x 6"
37D1200ADB 3/8" x 12"
50D600ADB 1/2" x 6"
50D1200ADB 1/2" x 12"
Cobalt Silver & Deming
Drill Bits - 1/2” Shank
Part No. Size
56DCSD 9/16"
62DCSD 5/8"
68DCSD 11/16"
75DCSD 3/4"
81DCSD 13/16"
87DCSD 7/8"
92DCSD 59/64"
93DCSD 15/16"
100DCSD 1"
112DCSD 1-1/8"
Drill Bits - Fractions, Letters, Numbers S&D
Cobalt Drill Bits
Part No. Size
6DCDB 1/16
7DCDB 5/64
9DCDB 3/32
10DCDB 7/64
12DCDB 1/8
14DCDB 9/64
15DCDB 5/32
17DCDB 11/64
18DCDB 3/16
20DCDB 13/64
21DCDB 7/32
23DCDB 15/64
25DCDB 1/4
26DCDB 17/64
28DCDB 9/32
29DCDB 19/64
31DCDB 5/16
32DCDB 21/64
34DCDB 11/32
35DCDB 23/64
37DCDB 3/8
39DCDB 25/64
40DCDB 13/32
42DCDB 27/64
43DCDB 7/16
45DCDB 39/64
46DCDB 15/32
48DCDB 31/64
50DCDB 1/2
High Speed Steel Letter Size Drill Bits
Part No. Size
999AHSD A
999BHSD B
999CHSD C
999DHSD D
999EHSD E
999FHSD F
999GHSD G
999HHSD H
Part No. Size
999IHSD I
999JHSD J
999KHSD K
999LHSD L
999MHSD M
999NHSD N
999OHSD O
999PHSD P
999QHSD Q
Part No. Size
999RHSD R
999SHSD S
999THSD T
999UHSD U
999VHSD V
999WHSD W
999XHSD X
999YHSD Y
999ZHSD Z
High Speed Steel Number Size Drill Bits
Part No. Size
1NHSD 1
2NHSD 2
3NHSD 3
4NHSD 4
5NHSD 5
6NHSD 6
7NHSD 7
8NHSD 8
9NHSD 9
10NHSD 10
11NHSD 11
12NHSD 12
13NHSD 13
14NHSD 14
15NHSD 15
16NHSD 16
17NHSD 17
18NHSD 18
19NHSD 19
20NHSD 20
21NHSD 21
22NHSD 22
23NHSD 23
24NHSD 24
25NHSD 25
26NHSD 26
Part No. Size
27NHSD 27
28NHSD 28
29NHSD 29
30NHSD 30
31NHSD 31
32NHSD 32
33NHSD 33
34NHSD 34
35NHSD 35
36NHSD 36
37NHSD 37
38NHSD 38
39NHSD 39
40NHSD 40N
41NHSD 41
42NHSD 42
43NHSD 43
44NHSD 44
45NHSD 45
46NHSD 46
47NHSD 47
48NHSD 48
49NHSD 49
50NHSD 50
51NHSD 51
52NHSD 52
53NHSD 53
Part No. Size
54NHSD 54
55NHSD 55
56NHSD 56
57NHSD 57
58NHSD 58
59NHSD 59
60NHSD 60
61NHSD 61
62NHSD 62
63NHSD 63
64NHSD 64
65NHSD 65
66NHSD 66
67NHSD 67
68NHSD 68
69NHSD 69
70NHSD 70
71NHSD 71
72NHSD 72
73NHSD 73
74NHSD 74
75NHSD 75
76NHSD 76
77NHSD 77
78NHSD 78
79NHSD 79
80NHSD 80
Silver and Deming Drills – 1/2" Shank
Part No. Size
51DSDB 33/64"
53DSDB 17/32"
54DSDB 35/64"
56DSDB 9/16"
57DSDB 37/64"
59DSDB 19/32"
60DSDB 39/64"
62DSDB 5/8"
64DSDB 41/64"
65DSDB 21/32"
67DSDB 43/64"
Part No. Size
68DSDB 11/16"
70DSDB 45/64"
71DSDB 23/32"
73DSDB 47/64"
75DSDB 3/4"
76DSDB 49/64"
78DSDB 25/32
79DSDB 51/64
81DSDB 13/16
82DSDB 53/64
84DSDB 27/32
85DSDB 55/64
Part No. Size
87DSDB 7/8
89DSDB 57/64
90DSDB 29/32
92DSDB 59/64
93DSDB 15/16
95DSDB 61/64
96DSDB 31/32
98DSDB 63/64
100DSDB 1
112DSDB 1-1/8
135DSDB 1-1/4
137DSDB 1-3/8
300 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DRILL BITS / TAPS
High Speed Steel
Stub Length Drill Bits
Part No. Size
4DSLD 3/64
6DSLD 1/16
7DSLD 5/64
9DSLD 3/32
10DSLD 7/64
12DSLD 1/8
14DSLD 9/64
15DSLD 5/32
17DSLD 11/64
18DSLD 3/16
20DSLD 13/64
21DSLD 7/32
23DSLD 15/64
25DSLD 1/4
26DSLD 17/64
28DSLD 9/32
29DSLD 19/64
31DSLD 5/16
32DSLD 21/64
34DSLD 11/32
35DSLD 23/64
37DSLD 3/8
39DSLD 25/64
40DSLD 13/32
42DSLD 27/64
43DSLD 7/16
45DSLD 29/64
46DSLD 15/32
48DSLD 31/64
50DSLD 1/2
SH3/8 (3/8SHNK)
29NSLD #29
34NSLD #34
Double End Drill Bits
Part No. Size
10DDED 7/64
12DDED 1/8
14DDED 9/64
15DDED 5/32
18DDED 3/16
20DDED 13/64
21DDED 7/32
25DDED 1/4
30DDED #30
Cobalt Screw Machine
Drill Bits
Part No. Size
12DCDB/SM 1/8
18DCDB/SM 3/16
28DCDB/SM 9/32
31DCDB/SM 5/16
50DCDB/SM 1/2
High Speed Steel
Reduced Shank Drill Bits
Part No. Size Shank
37DRSD/SH1/4 3/8 1/4
43DRSD/SH1/4 7/16 1/4
50DRSD/SH1/4 1/2 1/4
43DRSD/SH3/8 7/16 3/8
50DRSD/SH3/8 1/2 3/8
62DRSD/SH3/8 5/8 3/8
High Speed Steel
Taper Taps
Part No. Size
6CTAT/HSS 6-32
8CTAT/HSS 8-32
10CTAT/HSS 10-24
10FTAT/HSS 10-32
Pipe Thread Taper Taps
Part No. Size
12PTAT/PT 1/8-27
25PTAT/PT 1/4-18
37PTAT/PT 3/8-18
50PTAT/PT 1/2-14
75PTAT/PT 3/4-14
Drill Bits
Drill and Tap Size Chart
Tap Drill %
Size Size Thread
0-80 NF 3/64” 71
M1.6 x .35 1.25 mm 69
1-64 NC 53 mm 59
M2 x .4 52 mm 66
1-72 NF 53 mm 67
2-56 NC 50 mm 62
2-64 NF 50 mm 70
M2.5 x .45 46 mm 67
3-48 NC 5/64” 70
3-56 NF #46 69
4-40 NC #43 65
4-48 NF #42 61
M3 x .5 #40 70
M3 x .5 #40 70
5-40 NC #38 65
5-44 NF #37 63
M3.5 x .6 #32 63
6-32 NC #36 72
6-40 NF #33 69
M4 x .7 #30 73
8-32 NC #29 62
8-36 NF #29 70
Tap Drill %
Size Size Thread
10-24 NC #25 69
10-32 NF #21 68
M5 x .8 #19 68
12-24 NC #16 66
M6 x 1.0 #9 71
1/4-20 NC #7 70
1/4-28 NF #3 72
5/16-18 NC G 66
5/16-24 NF 1 67
M8 x 1.25 H 70
3/8-16 NC O 68
3/8-24 NF Q 71
M10 x 1.5 8.5 mm 71
7/16-14 NC U 70
7/16-20 NF 25/64" 65
M12 x 1.75 13/32" 69
1/2-13 NC 27/64" 73
1/2-20 NF 29/64" 65
M14 x 2.0 12.0 mm 72
9/16-12 NC 31/64" 68
9/16-18 NF 33/64" 58
Tap Drill %
Size Size Thread
5/8-11 NC 35/64" 62
5/8-18 NF 37/64" 58
M16 x 2.0 35/64" 76
3/4-10 NC 21/32" 68
3/4-16 NF 11/16" 71
M20 x 2.5 11/16" 74
7/8-9 NC 25/32" 61
M24 x 3.0 53/64" 72
1-8 NC 7/8" 73
1-12 NF 59/64" 67
1-14 NS 15/16" 61
1-1/8-7 NC 63/64" 72
1-1/8-12 NF 1-3/64” 66
M30 x 3.5 1-3/64” 75
1-1/4-7 NC 1-1/8” 67
1-1/4-12 NF 1-11/64” 72
1-3/8-6 NC 1-7/32” 72
1-3/8-12 NF 1-19/64” 72
M36 x 4.0 1-1/4” 82
1-1/2-6 NC 1/11/1932 72
1-1/2-12 NF 1-27/64” 72
Carbon Steel Taper Taps
Part No. Size
1CTAT/CAS 1-64
2CTAT/CAS 2-56
3CTAT/CAS 3-48
4CTAT/CAS 4-40
5CTAT/CAS 5-40
6CTAT/CAS 6-32
8CTAT/CAS 8-32
10CTAT/CAS 10-24
12CTAT/CAS 12-24
25CTAT/CAS 1/4-20
31CTAT/CAS 5/16-18
37CTAT/CAS 3/8-16
43CTAT/CAS 7/16-14
50CTAT/CAS 1/2-13
56CTAT/CAS 9/16-12
62CTAT/CAS 5/8-11
75CTAT/CAS 3/4-10
87CTAT/CAS 7/8-9
100CTAT/CAS 1-8
0FTAT/CAS 0-80
Taps
Part No. Size
1FTAT/CAS 1-72
2FTAT/CAS 2-64
3FTAT/CAS 3-56
4FTAT/CAS 4-48
5FTAT/CAS 5-44
6FTAT/CAS 6-40
8FTAT/CAS 8-36
10FTAT/CAS 10-32
12FTAT/CAS 12-28
25FTAT/CAS 1/4-28
31FTAT/CAS 5/16-24
37FTAT/CAS 3/8-24
43FTAT/CAS 7/16-20
50FTAT/CAS 1/2-20
56FTAT/CAS 9-16-18
62FTAT/CAS 5/8-18
75FTAT/CAS 3/4-16
87FTAT/CAS 7/8-14
100FTAT/CAS 1-14
301
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
High Speed Steel
Plug Taps
Part No. Size
10CPLT/HSS 10-24
25CPLT/HSS 1/4-20
31CPLT/HSS 5/16-18
37CPLT/HSS 3/8-16
50CPLT/HSS 1/2-13
51CPLT/HSS 5/8-11
10FPLT/HSS 10-32
TAPS / CARBIDE-TIPPED CUTTERS
Carbon Steel Plug Taps
Part No. Size
1CPLT/CAS 1-64
2CPLT/CAS 2-56
3CPLT/CAS 3-48
4CPLT/CAS 4-40
5CPLT/CAS 5-40
6CPLT/CAS 6-32
8CPLT/CAS 8-32
10CPLT/CAS 10-24
12CPLT/CAS 12-24
25CPLT/CAS 1/4-20
31CPLT/CAS 5/16-18
37CPLT/CAS 3/8-16
43CPLT/CAS 7/16-14
50CPLT/CAS 1/2-13
56CPLT/CAS 9/16-12
62CPLT/CAS 5/8-11
75CPLT/CAS 3/4-10
87CPLT/CAS 7/8-9
100CPLT/CAS 1-8
0FPLT/CAS 0-80
Taps
Part No. Size
1FPLT/CAS 1-72
2FPLT/CAS 2-64
3FPLT/CAS 3-56
4FPLT/CAS 4-48
5FPLT/CAS 5-44
6FPLT/CAS 6-40
8FPLT/CAS 8-36
10FPLT/CAS 10-32
12FPLT/CAS 12-28
25FPLT/CAS 1/4-28
31FPLT/CAS 5/16-24
37FPLT/CAS 3/8-24
43FPLT/CAS 7/16-20
50FPLT/CAS 1/2-20
56FPLT/CAS 9-16-18
62FPLT/CAS 5/8-18
75FPLT/CAS 3/4-16
87FPLT/CAS 7/8-14
100FPLT/CAS 1-14
Carbon Steel Bottom Taps
Part No. Size
1CBOT/CAS 1-64
2CBOT/CAS 2-56
3CBOT/CAS 3-48
4CBOT/CAS 4-40
5CBOT/CAS 5-40
6CBOT/CAS 6-32
8CBOT/CAS 8-32
10BOLT/CAS 10-24
12CBOT/CAS 12-24
25CBOT/CAS 1/4-20
31CBOT/CAS 5/16-18
37CBOT/CAS 3/8-16
43CBOT/CAS 7/16-14
50CBOT/CAS 1/2-13
56CBOT/CAS 9/16-12
62CBOT/CAS 5/8-11
75CBOT/CAS 3/4-10
87CBOT/CAS 7/8-9
100CBOT/CAS 1-8
112CBOT/CAS 1-1/8-7
125CBOT/CAS 1-1/4-7
Part No. Size
137CBOT/CAS 1-3/8-6
150CBOT/CAS 1-1/2-6
0FBOT/CAS 0-80
1FBOT/CAS 1-72
2FBOT/CAS 2-64
3FBOT/CAS 3-56
4FBOT/CAS 4-48
5FBOT/CAS 5-44
6FBOT/CAS 6-40
8FBOT/CAS 8-36
10FBOT/CAS 10-32
12FBOT/CAS 12-28
25FBOT/CAS 1/4-28
31FBOT/CAS 5/16-24
37FBOT/CAS 3/8-24
43FBOT/CAS 7/16-20
50FBOT/CAS 1/2-20
56FBOT/CAS 9-16-18
62FBOT/CAS 5/8-18
75FBOT/CAS 3/4-16
87FBOT/CAS 7/8-14
100FBOT/CAS 1-14
Combo Drill/Tap Bit Set
6-32 to 1/4-20 6 piece drill/tap
set and individual bits. For up
to 10 gauge mild steel, copper,
brass and aluminum. 1/4" hex
shank.
Part No. Description
DTAPKIT 6-32 to 1/4-20
6-pc. drill/tap set
Designed Specifically for
Sheet Metal Hole Cutting
• Accurate, Burr-Free Holes
Precision ground carbide teeth
for fast cutting of clean, round
holes
• Will Not Damage Work
Over-drill stopper prevents the
tool from penetrating beyond
the hole
• Starts on Contact
Split point pilot bit for faster
penetration and less walking
30877 - 12 Piece Electrician's Kit
7/8", 1-1/8", 1-3/8", Arbors: 3L, 5L, 1/4" split
point pilot bit, plug ejection springs, 1/8" hex
wrench
30878 - 15 Piece Electrician's Kit
7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", Arbors:
3L, 5L, 1/4" split point pilot bit, plug ejection
springs, 1/8" hex wrench
Carbide Hole Cutter
Part Model Diameter Conduit
No. No. (Inches) Size Arbor
20092 12CHC 3/4” x 1/2” — 5L
20093 14CHC 7/8” x 1/2” 1/2” 5L
20094 16CHC 1” x 1/2” — 5L
20096 18CHC 1-1/8” x 1/2” 3/4” 5L
20097 19.5CHC 1-7/32" x 1/2" — 5L
20098 20CHC 1-1/4” x 1/2” — 3L
20100 22CHC 1-3/8” x 1/2” — 3L
20102 24CHC 1-1/2” x 1/2” — 3L
20103 28CHC 1-3/4” x 1/2” 1-1/4” 3L
20104 32CHC 2” x 1/2” 1-1/2” 3L
20105 34CHC 2-1/8” x 1/2” — 3L
20108 40CHC 2-1/2” x 1/2” 2” 3L
20109 42CHC 2-5/8” x 1/2” — 3L
20113 44CHC 2-3/4” x 1/2” — 3L
20114 48CHC 3” x 1/2” — 3L
Accessories Description
30879 35PD 1/4" split point stubby pilot bit
30880 3CHC-AS Plug ejection spring
30005 5L 3/8" arbor for 11CHC - 19.5CHC
30003 3L 1/2" arbor for 20CHC - 48CHC
302 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CARBIDE-TIPPED CUTTERS
Sheet Metal Carbide Hole Cutters
Quick Change Sheet Metal Carbide Tooth Hole Saws
• Designed for hand held
applications to produce drill
press quality holes
• Drills burr free hole
• Heavy-duty cutting
performance
• One arbor fits all cutters
• Easy slug ejection or removal
• Ability to pre-drill pilot holes
and then attach cutter
• Heavy-duty carbide tipped
hole cutters stay sharp longer
than high-speed steel or
bi-metal cutters
• Multiple teeth reduce load -
less cutting force required
For material up to 3/16” thick. Heavy-duty carbide teeth cut
fine holes in stainless steel or structural steels studs. Improve
production in brass, aluminum and other thin sheet materials.
Cutter only, arbor sold separately. Use arbor number 49-57-0035.
Diameter P/N
3/4" 49-57-8305
7/8" 49-57-8309
1" 49-57-8311
1-1/8" 49-57-8315
1-7/32" 49-57-8317
1-3/8" 49-57-8323
1-7/16" 49-57-8325
1-3/4" 49-57-8329
Diameter P/N
2" 49-57-8331
2-1/8" 49-57-8333
2-1/4" 49-57-8335
2-3/8" 49-57-8337
2-1/2" 49-57-8339
2-5/8" 49-57-8341
3" 49-57-8343
5-piece Contractors' Kit
49-22-8200
Consists of 7/8", 1-1/8", 1-3/8",
pilot and arbor. Includes
plastic carrying case
7-piece Contractors’ Kit
49-22-8210
Consists of 7/8", 1-1/8", 1-3/8",
1-3/4", 2" pilot and arbor.
Includes plastic carrying case
Steel Plate Carbide Hole Cutters
Quick Change Steel Plate Carbide Tooth Hole Saws
For material up to 1/2” thick. Excellent for
hand held applications in 1/4” or 3/8” mate-
rial (use arbor number 49-57-0035). For
thick material up to 1/2”, use a drill press and
arbor number 49-57-0037. Cutter only, arbor
sold separately,
Cutter only, arbor sold separately. Use arbor
number 49-57-0037.
Diameter P/N
11/16" 49-57-8201
3/4" 49-57-8203
13/16" 49-57-8205
7/8" 49-57-8207
15/16" 49-57-8209
1" 49-57-8211
1-1/16" 49-57-8213
Diameter P/N
1-1/8" 49-57-8215
1-3/16" 49-57-8217
1-1/14" 49-57-8219
1-5/16" 49-57-8221
1-3/8" 49-57-8223
1-7/16" 49-57-8225
1-1/2" 49-57-8227
5-piece Electricians’ Kit
49-22-8300
Consists of 11/16", 13/16",
15/16", pilot and arbor.
Includes plastic carrying case
7-piece Electricians’ Kit
49-22-8310
Consists of 11/16”, 13/16”,
15/16”, 1-1/8", 1-3/8", 2" pilot
and arbor. Includes plastic
carrying case
Quick Change Arbor System
Pilot Bits
Part No. Size
49-57-0038 1/4" x 2-3/7"
Arbor
Part No.
49-57-0035
Arbors for Drill Presses
Part No. Shank Incl.
49-57-0037 1/2" Center
pin & detachable
drill cap
42-52-1052 Drill Cap
40-52-8780 Ejector Spring
**Drill cap is for drilling a
pilot hole ID used in a hand
held application.
49-57-0037
49-52-1052
CT7 5-Pc. Carbide
Tipped Hole Cutter Set
• For cutting holes up to 1" thick
in a cast iron, steels, alumi-
num, & non-ferrous materials.
• Designed for steel fabricators,
welders, plumbers, & mechanics.
• Features "triple-edge" teeth
and ejector spring for fast
hole cutting & slug ejection.
• Contains 7/8", 1-1/8", 1-3/8,
1-3/4" & 2" Hole Cutters
Part No. Description
CT7-SET-3 5-pc. Set
One-Piece Steel Hog Cutters
• Two sizes with 1/2" cutting depth: 11/16" & 13/16".
• Recommended for use Milwaukee Electromagnetic
drill presses or hand drill.
Part No. Diameter
49-57-8068 11/16"
49-57-8081 13/16"
303
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
VARI-BIT™ STEP DRILL BITS
Vari-Bit™ Step Drill Bits
• Accurate, Burr-Free Holes
Patented two-flute design cuts fast, clean, round holes.
• Starts on Contact
Split point design for faster penetration and less walking
• Long Tool Life
Steam oxide coating adds durability
Enhanced flute design removes chips rapidly
Use of PROTOOL LUBE® recommended to extend tool life
Lenox
Vari-Bit P/N
No. of
Holes
Hole Sizes
(Inches)
Chuck
Size
Unibit
P/N
KLEIN
Unibit P/N
30081-VB1 13 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32,
3/8, 13/32, 7/16, 15/32, 1/2
1/4"
& larger 1 1-59001
30882-VB2 9 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 3/8"
& larger 20 2-59002
30883-VB3 9 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 3/8"
& larger 3 3-59003
30884-VB4 63/16, 1/4, 5/16, 3/8, 7/16, 1/2 3/8"
& larger 2 5-59005
30886-VB6 23/8, 1/2 3/8"
& larger 10, 12 7-59007
30887-VB7 1 7/8 / 22 (for 1/2”, 12.5 Conduit) 3/8"
& larger 11 8-59008
30908-VB8 12 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,
11/16, 3/4, 13/16, 7/8
3/8"
& larger 4 14-59014
30909-VB9 3 7/8, 1-1/8, 1-7/32 3/8"
& larger
11,
13, 14 59011
30888-VB11 2 7/8, 1-1/8 (for 1/2” and 3/4” conduit) 3/8"
& larger 13 11-590011
30912-VB12 57/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8
(for 1/2” and 3/4” conduit)
3/8"
& larger None None
30925-VBX8 Extension 8”. Fits 3/8” Drill chuck and larger 3/8"
& larger
30889 - 3 Piece Kit
Includes: VB1, VB2 and VB3.
30926 - 4 Piece Kit
Includes: VB1, VB2, VB7 and VB8
30929 - 4 Piece Kit
Includes: VB1, VB3, VB8 and VB12
30927 - 6 Piece Kit
Includes: VB1, VB2, VB6, VB7, VB8 and VB12
304 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HOLE SAWS KITS
Plumber No. 30808-600P
Six sizes most commonly used for pipe
tab and entrance. One each hole saws
3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4".
One each arbors 2L, 4L. One spare pilot
drill. One arbor adapter. Plastic case.
Electrician No. 30821-600L
Six sizes most commonly used for pipe
tab and entrance. One each hole saws
3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4".
One each arbors 2L, 4L. One spare pilot
drill. One arbor adapter. Plastic case.
Big Daddy 2000G
Twenty sizes handle just about all
installation, maintenance and repair jobs.
One each hole saws 3/4", 7/8", 1", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2", 2-1/8". 2-1/4",
2-1/2", 2-11/16", 3", 3-1/4", 3-3/8", 3-5/8",
3-3/4", 4-1/8", 4-1/2", 4-3/4". Arbors: 1L,
2L and 5L. Two 4321 pilot drills and one
56D pilot drill. Plastic case.
Electrician No. 30802-1200L
Twelve sizes needed to bring pipe and
conduit through floors, ceilings, partitions
and into junction boxes. One each hole
saws 3/4", 7/8", 1-1/8", 1-3/8", 1-3/4",
1-3/4", 2", 2-1/2", 2-11/16", 3", 3-5/8",
4-1/8", 4-3/4. Arbors: 2L, 5L. Two 4321
and one 56PD pilot drills. Plastic case.
Bi-Metal Hole Saw Kits
15-pc. General Purpose Kit
No. 302901-100CTG
15 sizes most commonly used. One each
hole saws: 3/4", 7/8", 1-1/8", 1-1/4",
1-3/8", 1-1/2", 1-3/4", 2", 2-9/16", 3".
One each arbors 1L, 2L. (2) - 123CT pilot
drills. Plastic case.
9-pc. Plumber's Kit
No. 30294-600CTG
9 sizes most commonly used. One each
hole saws: 3/4", 7/8", 1-1/8", 1-1/2",
1-3/4", 2-1/4". One each arbors 1L, 2L.
(1) - 123CT pilot drills. Plastic case.
9-pc. Electrician's Kit
No. 30295-600CTG
9 sizes most commonly used. One each
hole saws: 7/8", 1-1/8", 1-3/8", 1-3/4",
2-1/4". One each arbors 1L, 2L. (1) -
123CT pilot drills. Plastic case.
10-Pc Electrician's Kit
49-22-4095
One each hole saws 3/4", 7/8", 1-3/8", 1-3/4",
2", 2-1/2". One each arbors 49-56-7010,
49-56-9100. (2) spare pilot drills 49-56-
8010. One arbor adapter 49-56-6560.
Spacer 49-67-0120. Plastic case.
19-Pc Master Electrician's Kit
49-22-4105
One each hole saws 3/4", 7/8", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2",
2-5/8", 3", 3-5/8", 4-1/8", 4-3/4". One
each arbors 49-56-7010, 49-56-9100.
(3) spare pilot drills 49-56-8010. One
arbor adapter 49-56-6560. Spacer
49-67-0120. Plastic case.
10-Pc Plumber's Kit
49-22-4145
One each hole saws 3/4", 7/8", 1-1/8", 1-1/2",
1-3/4", 2-1/4". One each arbors 49-56-7010,
49-56-9100. (2) spare pilot drills 49-56-
8010. One arbor adapter 49-56-6560.
Spacer 49-67-0120. Plastic case.
18-Pc Master Plumber's Kit
49-22-4155
One each hole saws 3/4", 7/8", 1-1/8",
1-3/8", 1-1/2", 1-3/4", 2-1/4", 2-5/8",
3", 3-1/2", 4", 4-1/4", 4-1/2". One each
arbors 49-56-7010, 49-56-9100. (3)
spare pilot drills 49-56-8010. One
arbor adapter 49-56-6560. Spacer
49-67-0120. Plastic case.
Ice Hardened™ Hole Saw Kits
Carbide-Tipped Hole Saw Kits
305
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BI-METAL HOLE SAWS
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
126281 AVXTL27 1-11/16"
126298 AVXTL28 1-3/4" 1-1/2" 1-1/4" 1-1/2"
126311 AVXTL29 1-13/16" 1-1/2"
126328 AVXTL30 1-7/8"
126342 AVXTL32 2" 1-1/2"
126359 AVXTL33 2-1/16"
126366 AVXTL34 2-1/8"
126380 AVXTL36 2-1/4" 2" 2"
126397 AVXTL37 2-5/16"
126403 AVXTL38 2-3/8"
AVXTL40 - AVXTL96 Use 5/8-18 Arbors:
M45P, M46PS, M55P or M44K
126427 AVXTL40 2-1/2" 2" 2"
126434 AVXTL41 2-9/16"
126441 AVXTL42 2-5/8"
126472 AVXTL44 2-3/4"
126489 AVXTL46 2-7/8"
126502 AVXTL48 3" 2-1/2"
126519 AVXTL50 3-1/8"
126526 AVXTL52 3-1/4" 3"
126533 AVXTL54 3-3/8"
126540 AVXTL56 3-1/2"
126557 AVXTL58 3-5/8" 3"
126564 AVXTL60 3-3/4" 3-1/2"
126571 AVXTL62 3-7/8" 3-1/2"
126595 AVXTL64 4"
126601 AVXTL66 4-1/8" 3-1/2" 3-1/2"
126618 AVXTL68 4-1/4" 4" 4"
126625 AVXTL70 4-3/8"
126632 AVXTL72 4-1/2" 4" 4"
126649 AVXTL76 4-3/4" 4-1/2"
126656 AVXTL80 5" 5"
126663 AVXTL88 5-1/2"
126687 AVXTL96 6"
M24K
M24
M34
M44K
M44
M35PS
M45
M45P
M46PS
M55P
Arbors
These heavy-duty, carbon steel arbors come complete with pilot
drills. They adapt Morse Hole Saws to any power drill used by
professionals.
Part No. Shank Thread Chuck Fits Saws
M24K 1/4 Round 1/2-20 1/4
9/16"
through
1-3/16"
M24 1/4 Hex 1/2-20 1/4
M34 3/8 Hex 1/2-20 3/8
M44 7/16 Hex 1/2-20 1/2
M44K 7/16 Hex 1/2-20 1/2 9/16" – 6"
M45 7/16 Hex 5/8-18 1/2
1-1/2"
through
6"
M45P 7/16 Hex 5/8-18 1/2
M46PS 7/16 Hex 5/8-18 1/2
M55P 5/8 Hex 5/8-18 3/4
M35PS 3/8 Hex 5/8-18 3/8 1-1/4" – 2-3/8"
CobaltXTL Bi-Metal Hole Saws
This premium line of professional
quality hole saws features an M3
high-speed steel cutting edge,
electron beam welded to a tough
steel backer. Caps stand up to abuse
and punishment, yet are lighter and
easier to use. Positive rake tooth
design provides better chip clearance
as teeth cut into wood, plastic or any
machinable metal. The 1-1/2" cutting
depth cuts easily through 2x4's. A
separate arbor is required
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
AVXTL09 - AVXTL19 Use 1/2-20 Arbors:
M24, M24K, M34, M44 or M44K
126007 AVXTL09 9/16" 1/8"
126014 AVXTL10 5/8" 1/4"
126038 AVXTL11 11/16" 3/8"
126045 AVXTL12 3/4" 1/2" 3/8" 1/2"
126069 AVXTL13 13/16" 1/2"
126076 AVXTL14 7/8" 3/4" 1/2" 5/8"
126083 AVXTL15 15/16"
126106 AVXTL16 1" 3//4"
123113 AVXTL17 1-1/16"
126120 AVXTL18 1-1/8" 1" 3/4" 3/4"
126144 AVXTL19 1-3/16"
AVXTL20 - AVXTL38 Use 5/8-18 Arbors:
M35PS, M45, M45P, M46PS, M55P or M44K
126151 AVXTL20 1-1/4" 1"
126182 AVXTL21 1-5/16"
126199 AVXTL22 1-3/8" 1"
126229 AVXTL23 1-7/16" 1-1/4"
126236 AVXTL24 1-1/2" 1-1/4"
126250 AVXTL25 1-9/16"
126274 AVXTL26 1-5/8"
306 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BI-METAL HOLE SAWS
Order No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
0012 - 0057: Use Arbors: 49-56-6950, 49-56-6960,
49-56-7000, 49-56-7010
49-56-0012 5/8" 1/4"
49-56-0017 11/16" 3/8"
49-56-0023 3/4" 1/2" 3/8" 1/2"
49-56-0027 13/16" 1/2"
49-56-0032 7/8" 3/4" 1/2" 5/8"
49-56-0037 15/16"
49-56-0043 1" 3//4"
49-56-0047 1-1/16"
49-56-0052 1-1/8" 1" 3/4" 3/4"
49-56-0057 1-3/16"
0062 - 0253 Use Arbors: 49-56-7055, 49-56-7140,
49-56-7150, 49-56-9100
49-56-0062 1-1/4" 1"
49-56-0067 1-5/16"
49-56-0072 1-3/8" 1"
49-56-0077 1-7/16" 1-1/4"
49-56-0082 1-1/2" 1-1/4"
Order No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
49-56-0087 1-9/16"
49-56-0092 1-5/8"
49-56-0097 1-11/16"
49-56-0102 1-3/4" 1-1/2" 1-1/4" 1-1/2"
49-56-0107 1-13/16" 1-1/2"
49-56-0112 1-7/8"
49-56-0117 2" 1-1/2"
49-56-0122 2-1/16"
49-56-0127 2-1/8"
49-56-0132 2-1/4" 2" 2"
49-56-0137 2-5/16"
49-56-0142 2-3/8"
49-56-0147 2-1/2" 2" 2"
49-56-0153 2-9/16"
49-56-0158 2-5/8"
49-56-0163 2-3/4"
49-56-0167 2-7/8"
49-56-0173 3" 2-1/2"
49-56-0177 3-1/8"
49-56-0183 3-1/4" 3"
49-56-0187 3-3/8"
49-56-0193 3-1/2"
49-56-0197 3-5/8" 3"
49-56-0203 3-3/4" 3-1/2"
49-56-0207 3-7/8"
49-56-0213 4"
49-56-0217 4-1/8" 3-1/2" 3-1/2"
49-56-0223 4-1/4" 4" 4"
49-56-0227 4-3/8"
49-56-0233 4-1/2" 4" 4"
49-56-0237 4-3/4" 4-1/2"
49-56-0243 5" 5"
49-56-0247 5-1/2"
49-56-0253 6"
Ice Hardened Bi-Metal
Hole Saws
• Ice Hardened for up to
50% longer life than the
competition
Proprietary cryogenic hard-
ening process that is more
consistently harder than
heat-treating.
• Matrix II Bi-Metal Construction
Greater durability
• Cuts Faster
Unique precision-ground tooth geometry and positive rake angle
cuts more aggressively.
• Optimum Life
Radiused back face reduces stress on the teeth.
Part No. Shank Thread Chuck Fits Saws
49-56-6950 1/4 Round 1/2-20 1/4
9/16"
through
1-3/16"
49-56-6960 1/4 3-Flats 1/2-20 1/4
49-56-7000 7/16 Hex 1/2-20 1/2
49-56-7010 3/8 Hex 1/2-20 3/8
49-56-7055 7/16 Hex 5/8-18 1/2
1-1/4"
through
6"
49-56-7140 7/16 Hex 5/8-18 1/2
49-56-4150 7/16 Hex 5/8-18 1/2
49-56-7150 3/8 Hex 5/8-18 3/8
49-56-6950
49-56-6960
49-56-7000
49-56-7010
49-56-7055
49-56-7140
49-56-7150
307
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BI-METAL HOLE SAWS
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
30025 25L 1-9/16"
30026 26L 1-5/8"
30027 27L 1-11/16"
30028 28L 1-3/4" 1-1/2" 1-1/4" 1-1/2"
30029 29L 1-13/16" 1-1/2"
30030 30L 1-7/8"
30032 32L 2" 1-1/2"
30033 33L 2-1/16"
30034 34L 2-1/8"
30036 36L 2-1/4" 2" 2"
30038 38L 2-3/8"
30040 40L 2-1/2" 2" 2"
30041 41L 2-9/16"
30042 42L 2-5/8"
30044 44L 2-3/4"
30046 46L 2-7/8"
30048 48L 3" 2-1/2"
30050 50L 3-1/8"
30052 52L 3-1/4" 3"
30054 54L 3-3/8"
30056 56L 3-1/2"
30058 58L 3-5/8" 3"
30060 60L 3-3/4" 3-1/2"
60064 64L 4"
60066 66L 4-1/8" 3-1/2" 3-1/2"
60068 68L 4-1/4" 4" 4"
30072 72L 4-1/2" 4" 4"
30076 76L 4-3/4" 4-1/2"
30080 80L 5" 5"
30088 88L 5-1/2"
30096 96L 6"
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
9L - 19L Use 1/2-20 Arbors: 1L, 4L or 5L
30009 9L 9/16" 1/8"
30010 10L 5/8" 1/4"
30011 11L 11/16" 3/8"
30012 12L 3/4" 1/2" 3/8" 1/2"
30013 13L 13/16" 1/2"
30014 14L 7/8" 3/4" 1/2" 5/8"
30015 15L 15/16"
30016 16L 1" 3//4"
30017 17L 1-1/16"
30018 18L 1-1/8" 1" 3/4" 3/4"
30019 19L 1-3/16"
20L - 96L Use 5/8-18 Arbors: 2L or 6L
30020 20L 1-1/4" 1"
30021 21L 1-5/16"
30022 22L 1-3/8" 1"
30023 23L 1-7/16" 1-1/4"
30024 24L 1-1/2" 1-1/4"
Bi-Metal Hole Saws
• Durable
TUFF TOOTH™ design is
reinforced to cut stronger
and last longer.
• Long Lasting
Patented VARI-TOOTH®
design resists tooth strippage
• Stays Sharp
High speed steel teeth resist
breaking for extended life
• Withstands High Torque
Thick backing plate with holes for drive pins resists damage
due to high torque
All Hole Saws
9/16" to 3/4"
are available in
master packs
of 10.
All Hole Saws
1-13/16" to
3-1/2"
are available in
master packs
of 5.
Hole Saw
Arbors
Part No. Shank Chuck Fits Saws
1L Hex 1/2
9L - 19L
4L Round 1/4
5L Hex 3/8
2L Hex 1/2 20L - 96L
6L Hex 3/8
1L 2L 4L 5L 6L
Hole Saw Accessories
18X
55X
10X
12X
56PD
4321
Order
No.
Part
No. Description
Chuck
Size
Fits
Arbor
30850 4321 Pilot Drill, 1/Pack 1/4" 1L, 2L, 4L
30851 56PD Pilot Drill, 1/Pack 1/4" 5L, 6L
30846 55X 5-1/2" Extension, 1/Pack 1/2" 1L, 2L
30843 10X 10" Extension, 1/Pack 3/8" 5L, 6L
30847 12X 12" Extension, 1/Pack 1/2" 1L, 2L
30848 18X 18" Extension, 1/Pack 1/2" 1L, 2L
30857 AA1 Arbor Adapter, 5/Pack — 1L, 4L, 5L
308 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BI-METAL / CARBIDE-TIPPED HOLE SAWS
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
9CT - 18CT Use 1/2-20 Arbors: 1L or 4L
30212 12CT 3/4" 1/2" 3/8" 1/2"
30214 14CT 7/8" 3/4" 1/2" 5/8"
30216 16CT 1" 3//4"
30218 18CT 1-1/8" 1" 3/4" 3/4"
20CT - 96CT Use 5/8-18 Arbors: 2L
30220 20CT 1-1/4" 1"
30222 22CT 1-3/8" 1"
30224 24CT 1-1/2" 1-1/4"
30226 26CT 1-5/8"
30228 28CT 1-3/4" 1-1/2" 1-1/4" 1-1/2"
30232 32CT 2" 1-1/2"
30234 34CT 2-1/8"
30236 36CT 2-1/4" 2" 2"
30238 38CT 2-3/8"
30240 40CT 2-1/2" 2" 2"
30242 42CT 2-5/8"
30248 48CT 3" 2-1/2"
30252 52CT 3-1/4" 3"
30254 54CT 3-3/8"
30256 56CT 3-1/2"
30258 58CT 3-5/8" 3"
30260 60CT 3-3/4" 3-1/2"
30264 64CT 4"
30266 66CT 4-1/8" 3-1/2" 3-1/2"
30268 68CT 4-1/4" 4" 4"
30272 72CT 4-1/2" 4" 4"
30276 76CT 4-3/4" 4-1/2"
30280 80CT 5" 5"
30288 88CT 5-1/2"
30296 96CT 6"
30297 123CT 1/4" Carbide-Tipped Pilot Drill
Carbide Tipped
Hole Saws
Designed To Cut
Abrasive Materials
• Long Tool Life
Heat resistant carbide teeth
for long life in tile and stain-
less steel.
• Added Durability
Thick backing plate resists
damage and increases life.
• Unique Tooth Configuration
Engineered design cuts in
stainless steel like no other.
Bi-Metal Hole Saws
with Arbors
• Durable
TUFF TOOTH™ design is rein-
forced to cut stronger and last
longer.
• Long Lasting
Patented VARI-TOOTH® design
resists tooth strippage
• Stays Sharp
High speed steel teeth resist
breaking for extended life
• Withstands High Torque
Thick backing plate with holes for
drive pins resists damage due to
high torque
Order
No. Part No. Diameter
Pipe
Tap
Size
Pipe
Entrance
Size
For
Copper
Pipe I.D.
34009 9A 9/16" 1/8"
34010 10A 5/8" 1/4"
34011 11A 11/16" 3/8"
34012 12A 3/4" 1/2" 3/8" 1/2"
34013 13A 13/16" 1/2"
34014 14A 7/8" 3/4" 1/2" 5/8"
34015 15A 15/16"
34016 16A 1" 3//4"
34017 17A 1-1/16"
34018 18A 1-1/8" 1" 3/4" 3/4"
34019 19A 1-3/16"
34020 20A 1-1/4" 1"
34021 21A 1-5/16"
34022 22A 1-3/8" 1"
34023 23A 1-7/16" 1-1/4"
34024 24A 1-1/2" 1-1/4"
34025 25A 1-9/16"
34026 26A 1-5/8"
34027 27A 1-11/16"
34028 28A 1-3/4" 1-1/2" 1-1/4" 1-1/2"
34029 29A 1-13/16" 1-1/2"
34030 30A 1-7/8"
34032 32A 2" 1-1/2"
34033 33A 2-1/16"
34034 34A 2-1/8"
34036 36A 2-1/4" 2" 2"
34037 37A 2-5/16"
34038 38A 2-3/8"
34040 40A 2-1/2" 2" 2"
309
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
7/16” Hex Shank Extensions w/ Quick Change Shank
Tougher than Nails
• Extreme Durability
High speed steel cutting edges
provide long life in tough
applications, including nail-
embedded wood
• Optimized for Cordless Drilling
Smooth, effortless drilling
extends battery life
• Fast Clean Cutting
3 cutting edges enhance chip
removal for a fast, clean hole.
• Resharpenable
Resharpen with LENOX® Diamond file product no. 25312
Part
No. Description Hole
Diameter Shank
10947
Bi-Metal
Utility Bit
5/8" 1/4"
10948 3/4"
3/8"
10949 7/8"
10950 1"
10951 1-1/8"
10952 1-1/4"
10953 1-3/8"
AUGERS / UTILITY BITS
61 PTS Shorty, 62 PTS and 61/62 PTS Big Shank
Shorty Nail Eater II® Bits
Nail Eater® Extreme Power Bits
• Patented new designed for improved cutting and cleaner holes.
• Self-feeding screw point draws bit through wood.
• Made of super tough heat treated steel; cuts through nails and
provides longer life
• "Shorty" bits - for working in tight places, yet still can go through three
abutting 2 x 4’s.
• 61 PTS Shorty Nail Eater II®, 62 PTS and 61/62 Big Shank Shorty
Nail Eater II® Bits: Overall Length: 7-5/8"; Twist Length: 5" Elec-
tric drill required: 61 PTS - 5/8" through 61 PTS - 1" minimum
3/8" drill; All Big Shank, 1/2" drill.
• 66 PTS Nail Eater II® Overall Length: 18" - Twist Length: 15".
Part
No.
Hole
Dia.
Hex
Shank
Overall
Length
Twist
Length
61PTS-5/8 5/8"
15/16"
7-5/8" 5"
61PTS-11/16 11/16"
61PTS-3/4 3/4"
61PTS-13/16 13/16"
61PTS-7/8 7/8"
61PTS-1 1"
62PTS-5/8 5/8"
7/16"
62PTS-11/16 11/16"
62PTS-3/4 3/4"
62PTS-13/16 13/16"
62PTS-7/8 7/8"
62PTS-1 1"
61/62PTS-1-1/8 1-1/8
61/62PTS-1-1/4 1-1/4"
66PT-1/2 1/2" 5/16"
18" 15"
66PT-5/8 5/8"
7/16"
66PT-11/16 11/16"
66PT-3/4 3/4"
66PT-13/16 13/16"
66PT-7/8 7/8"
66PT-15/16 15/16"
66PT-1 1"
66PT-1-1/8 1-1/8"
66PT-1-1/4 1-1/4"
Bi-Metal Utility Bits
7/16” Quick Change Chucks
Used with 7/16" Quick-Change Shank.
Part No. Shank
48-03-0006 1/2”
48-03-0007 1/2” -20
48-03-0008 5/8”-16
Quick Change Auger Bits
All 4” twist and 6-1/2” long, 7/16” hex shank. Feed
screw pilot draws bit into wood. Sharp cutting spurs and
lips can be quickly resharpened.
Dia. Part No For Std. Pipe Sizes
7/8" 48-13-6552 3/8"
1-1/8" 48-13-6554 1/2"
1-1/4" 48-13-6555 3/4"
1-1/2" 48-13-6557 1"
For selfeed bits, auger bits and hole saws (1” dia. and larger)
with 7/16” hex shank. Fits 3-Jaw or Quick-Change chucks
Part No. Length Repl. Set Screw
48-28-4001 5-1/2" 06-83-2711
48-28-4006 12" 06-86-2711
48-28-4011 18" 06-86-2711
48-28-4016 24" 06-86-2711
49-96-0060 Repl. 1/8" Socket Wrench
310 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
D'VERSIBIT
D'Versibit™ System
The D'Versibit System makes it possible to easily accomplish even complex installations. Flexible
steel bits are the right tools for installing wire or cable inside existing walls. Simply bow the spring
shaft in the direction you want to drill. When used with the placement tool this flexibility makes it
possible to easily manipulate the bit within the walls. After drilling, attach a D'VersiGrip to the drill
and pull wire or cable back through the wall.
Bit Diameter
Color Code
Shaft
Length
Shaft
Diameter
Type M
Masonry
Part No.
Type HS
Wood
Part No.
Type A
Auger
Part No.
Type B
Combo
w/ Screw
Point
Part No.
Type C
Combination
Part No.
Extension
(Choose
by Shaft
Diameter
and Length)
1/4"
Blue
12"
3/16"
— 1412D — — — —
18" — 1418D — — — —
24" — 1424D — — 04-03-24C —
36" — — — — 04-03-36C 3XT 36
54" 5/32" — — — — 04-03-54C —
72" — — — — 04-03-72C —
3/8"
Black
12"
3/16"
— 3812D — — — —
24" — 3824D — — — —
36" — 3836D 06-03-36A 06-03-36B 06-03-36C 3XT 36
54" 069-03-54M 3858D 06-03-54A 06-03-54B 06-03-54C 3XT 54
72" — 3872D 06-03-72A 06-03-72B 06-03-72C 3XT 72
1/2"
Green
36" — 1236D 08-03-36A 08-03-36B 08-03-36C 3XT 36
54" — 1258D 08-03-54A 08-03-54B 08-03-54C 3XT 54
72" — 1272D 08-03-72A 08-03-72B 08-03-72C 3XT 72
54" 1/4" 08-504-54M — — — —
9/16"
Orange
36"
3/16"
— — 09-03-36A 09-03-36B — 3XT 36
54" — — 09-03-54A 09-03-54B 09-03-54C 3XT 54
72" — — 09-03-72A 09-03-72B 09-03-72C 3XT 72
3/4"
Red
36"
1/4"
— — 12-04-36A — — 4XT 36
54" — — 12-04-54A — 12-04-54C 4XT 54
72" — — 12-04-72A — 12-04-72C 4XT 72
1"
Red
36" — — 16-04-36A — — 4XT 36
54" — — 16-04-54A — — 4XT 54
72" — — 16-04-72A — — 4XT 72
D'VersaGrip
• Clip attaches to hole in bit, mesh basket
holds wire or cable during recovery,
swivel reduces twisting.
• For use with bit 3/8" diameter or larger.
Part No. For Pulling Wire:
38691 125 Single Wire w/ 3/8" - 1/2"
bits
38692 150 1/2" Wire w/ 1/2" - 9/16"
bits
38693 168 3/4" Wire w/ 3/4" - 1""
bits
311
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
7-Bit Plumbers Kit
Sizes include 7/8", 1-1/8", 1-1/4", 1-1/2" auger
bits and selfeed bits in 1-3/4", 2-1/8", 2-9/16"
diameters. Also 5-1/2" one piece - shank and
coupling - extension and carrying case.
Part No. Description
49-22-0065 7-Bit Plumbers’ Kit
SELFEED BITS
Selfeed Bits
Inside cutting plane shaves hole
radius for clean, smooth holes
without pressure.
Large Selfeed Bits -
3" – 4-5/8"
Double inside cutter blades
that shave hole radius for
clean, smooth holes without
pressure. Replaceable arbor.
7-Bit Contractors Kit
Sizes include 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4"
2-1/8", 2-9/16" diameters. Also 5-1/2" one piece -
shank and coupling - extension and carrying case.
Part No. Description
49-22-0130 7-Bit Contractor's Kit
4-Bit Contractors Kit
Sizes include1-3/8", 1-1/2", 2-1/8", 2-9/16"
diameters. Also 5-1/2" one piece - shank and
coupling - extension and carrying case.
Part No. Description
49-22-0135 4-Bit Contractor's Kit
Selfeed Bits
• Fast and Aggressive
For Balanced and smooth drilling.
• Hard and Tough
Heat-treated steel alloy for maximum toughness and wear
resistance
• Resharpenable
Using a standard file.
• Replaceable Feed Screw
Fast, effortless feeding even in gummy woods. (2) provided
with each bit
• Compatible with 7/16" Quick-Change Chucks and Extensions
Part No. Hole
Diameter Shank Type For Std.
Pipe Size
48-25-1001 1"
7/16" Quick
Change Shank
1/2"
48-25-1121 1-1/8" 3/4"
48-25-1251 1-1/4" —
48-25-1371 1-3/8" 1"
48-25-1501 1-1/2" 1"
48-25-1751 1-3/4" 1-1/2"
48-25-2001 2" —
48-25-2121 2-1/8"{ —
48-25-2251 2-1/4" 2"
48-25-2561 2-9/16" —
48-25-3001 3"
3-Milled Flats
2-1/2"
48-25-3621 3-5/8" 3"
48-25-4125 4-1/8" 3"
48-25-4621 4-5/8" 4"
Accessory Kits - Selfeed Bits - 1" to 2-9/16"
48-25-6000 Incl. 5 selfeed screws, 3 set screws & hex wrench
48-28-6870 Feed Screw - Coarse thread - 1/4"
49-96-0060 Socket Wrench - 1/8"
06-83-2625 Set Screw
Accessory Kits - Large Selfeed Bits - 3" to 4-5/8"
48-25-7000 Incl. 3 selfeed screws, 3 set screws & hex wrench
48-07-0201 Replaceable Arbor
48-28-6880 Feed Screw Regular THread, 3/8"
49-96-0070 Socket Wrench, 5/32"
06-83-3150 Set Screw
7/16” Quick Change Chucks
Used with 7/16" Quick-Change Shank.
Part No. Shank
48-03-0006 1/2”
48-03-0007 1/2” -20
48-03-0008 5/8”-16
7/16” Hex Shank Extensions w/ Quick Change Shank
For selfeed bits, auger bits and hole saws (1” dia. and larger)
with 7/16” hex shank. Fits 3-Jaw or Quick-Change chucks
Part No. Length Repl. Set Screw
48-28-4001 5-1/2" 06-83-2711
48-28-4006 12" 06-86-2711
48-28-4011 18" 06-86-2711
48-28-4016 24" 06-86-2711
49-96-0060 Repl. 1/8" Socket Wrench
Selfeed Bit Kits
312 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SELFEED BITS / HOLE CUTTERS
Switchblade™
Selfeed Bits
• Aggressive Feed
Screw Design
Pulls bit through the
wood faster.
• No Resharpening Needed
Hardened Steel replacement blades allow Switchblade™
Selfeed bits to cut like new
• Available in the sizes that Plumbers, HVAC Contractors and
Electricians use most frequently.
• Compatible with 7/16" Quick-Change Chucks and Extensions
(See page 311 for ordering information)
Part No. Hole
Diameter
3-Blade
Replacement
Kit
10-Blade
Replacement
Kit
48-25-5120 1-3/8" 48-25-5220 48-25-5320
48-25-5125 1-1/2" 48-25-5225 48-25-5325
48-25-5135 2" 48-25-5235 48-25-5335
48-25-5140 2-1/8" 48-25-5240 48-25-5340
48-25-5150 2-9/16" 48-25-5250 48-25-5350
48-25-5275 Replacement Feed Screw Kit
5-Pc Plumbers Kit
Includes: 4 Switchblade™ selfeed bits:
1-3/8", 1-1/2", 2-1/8", and 2-9/16"; 1
Universal Quik-Lok® extension: 5-1/2"
x 7/16", 1 ea. replacement blades:
1-3/8", 1-1/2", 2-1/8", and 2-9/16",
4 feed screws, 4 set screws, 1 hex
wrench; removable storage case;
carrying case.
Part No. Description
49-22-5100 5-Pc. Plumber's Kit
One Tooth® Rough Wood Hole Cutter
Drills Faster than Selfeed Bits
• Long Lasting
High speed steel tooth provides long
tool life.
• Cuts Fast / Low Torque
Designed to run at high speeds with
very little torque.
• Durable Wood Cutting Tool
• Easy Plug Removal
• Cuts At An Angle
• Uses Standard Arbor
For optimal performance, use with a
LENOX 2L Arbor and a 3/8” Stubby
Spade Bit.
Order
No. Part No. Diameter Application
25433 24HC 1-3/8" 1" pipe & lock installation
25434 34HC 2-1/8" 1-1/2" pipe & lock installation
25436 36HC 2-1/4" 1-1/2" pipe / 45°/90° couplings
25441 41HC 2-9/16" 2" pipe
25444 44HC 2-3/4" 2" pipe / 45°/90° couplings
25454 54HC 3-3/8" 3" duct pipe / bendable duct pipe
25456 56HC 3-5/8" 3" pipe
25464 64HC 4" 3" pipe & coupling & dryer vent
25469 69HC 4-5/16" 4" duct pipe / bendable duct pipe
25474 74HC 4-5/8" 4" pipe
25480 80HC 5" 4" pipe & coupling
25487 87HC 5-1/2" Toilet flange
25500 00HC 6-1/4" 6" duct pipe
25310 SB38 — 3/8" stubby spade bit
25312 DIAF1 — Diamond file for resharpening
7-Pc Kit - 25476-301G
One each ONE TOOTH® HOLE CUTTERS:
2-1/8", 2-9/16", 3-5/8". Arbor: 2L.
Diamond file. Two 3/8" stubby spade bits.
11-Pc Kit - 25477-701G
One each ONE TOOTH® HOLE CUTTERS:
2-1/8", 2-1/4", 2-9/16", 2-3/4", 3-5/8", 4",
4-5/8". Arbor: 2L. Diamond file. Two
3/8" stubby spade bits.
One Tooth® Rough Wood Hole Cutter Kits
BIGHAWG™ Hole Cutter Kit
• Three hardened steel teeth provide up to
ten times faster cutting than hole saws.
• Deep gullets for easy plug removal.
• Cuts up to 600 holes in wood without
needing to be re-sharpened.
Includes: (6) hole cutters: 2-1/8", 2-1/4",
2-9/16", 3", 3-5/8", 4-1/4", (1) arbor with
pilot bit, (2) pilot bits, (1) diamond file, (1)
hex wrench and impact resistant case
Part No. Description
49-56-9085 10-Pc. BIGHAWG™ Kit
313
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SCREW GUNS / TEK DRIVERS
Heavy Duty TEKS Screwdriver
• Powerful 6.5 amp motor, 0 to 2500 rpm, variable speed control
• Ramp-off depth locator for easy depth adjustments
• All metal gear case and diaphragm
• 10 ft. 2-wire rubber cord
• Ergonomic tactile grip and two finger trigger for user comfort and balance
• Removable belt clip with bit storage, TEK locator Assembly, 5/16" Magnetic Hex
Socket.
Specifications
Volts: 120 V AC Max HP: 0.9
Max. Amps: 6.5 Clutch: Snap-Action
No Load Speed: 0-2,500 rpm Spindle Offset: 0.92 in.
Drive Size: 1/4" Hex Weight: 3.7 lbs.
Part No. Description
6790-20 TEKS Screwdriver
Heavy Duty Metal Fastening Adjustable Clutch Screwdriver
• Maximum fastening control/minimum reaction force
• Smooth action, 21 position adjustable clutch - Torque: 0 - 140 in-lbs.
• Self-locking, push-in quick change 1/4 in. hex chuck for fast accessory changes
• Powerful 6.5 amp motor for maximum driving power
• Balanced, lightweight tool with comfortable grip
Specifications
Volts: 120 V AC Max HP: 0.9
Max. Amps: 6.5 Clutch: Adjustable
No Load Speed: 0-2,500 rpm Spindle Offset: 0.92 in.
Drive Size: 1/4" Hex Weight: 3.8 lbs.
Part No. Description
6780-20 Metal Fastening Adjustable Clutch Screwdriver
Adjustable Clutch Screwdriver
• Powerful 6.5 Amp Milwaukee Motor
• Multi Position Torque Sensitive Clutch - 10 - 140 in-lbs.
• 10 ft. 2-Wire Quik-Lok® cord
• All Metal Gear Case and Diaphragm
Specifications
Volts: 120 V AC Max HP: 0.9
Max. Amps: 6.5 Clutch: Adjustable
No Load Speed: 0-1,500 rpm Spindle Offset: 0.92 in.
Drive Size: 1/4" Hex Weight: 3.6 lbs.
Part No. Description
6580-20 Decking. Drywall & Framing Screwdriver
6780-20
6790-20
6580-20
Heavy Duty Decking, Drywall & Framing Screwdriver
• Powerful 6.5 amp motor, 0 to 2500 rpm, variable speed control
• Ramp-off depth locator for easy depth adjustments
• All metal gear case and diaphragm
• 10 ft. 2-wire rubber cord
• Ergonomic tactile grip and two finger trigger for user comfort and balance
• Removable belt clip with bit storage.
Specifications
Volts: 120 V AC Max HP: 0.9
Max. Amps: 6.5 Clutch: Snap-Action
No Load Speed: 0-2,500 rpm Spindle Offset: 0.92 in.
Drive Size: 1/4" Hex Weight: 3.7 lbs.
Part No. Description
6740-20 Decking. Drywall & Framing Screwdriver
6740-20
314 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SCREW GUNS / TEK DRIVERS
Heavy Duty VSR Deck/Drywall Screwdriver
• Helical-cut steel, heat treated gears for long life and durability
• High torque for deck building, drywall and heavy gauge steel stud framing
• Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
• Two-finger, rubber trigger
Specifications
Volts: 120 V AC
Max. Amps: 6.2 Clutch: Standard
No Load Speed: 0-2,500 rpm Torque: 132 in-lbs
Max Fastener Size: #12 Weight: 3.7 lbs.
Part No. Description
DW257 VSR Deck/Drywall Screwdriver
21-Piece Screwdriving Set
Contains:
• 1" Phillips bit tips: (1) #1, (6) #2, (1) #3
• 1" Slotted bit tips: (1) #6, (1) #8, (1) #10
• 1" Square Recess bit tips: (1) #1, (3) #2, (1) #3
• 2" Phillips power bit (1)
• 2" Square Recess power bit: (1) #2
• Nutdrivers: (1) 1/4", (1) 5/16"
• 2" Magnetic bit tip holder (1)
Part No. Description
DW2161 21-pc Screwdriving Set
DW257
Heavy Duty VSR Drywall Screwdriver
• Helical-cut steel, heat treated gears for long life and durability
• High torque for deck building, drywall and heavy gauge steel stud framing
• Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
• Two-finger, rubber trigger
Specifications
Volts: 120 V AC Torque: 60 in.-lbs.
Max. Amps: 6.0 Clutch: Standard
No Load Speed: 0-5,300 rpm Torque: 132 in-lbs
Max Fastener Size: #8 Weight: 3.7 lbs.
Part No. Description
DW255 VSR Deck/Drywall Screwdriver
DW255
Heavy Duty VSR Depth-Sensitive Screwdriver
• Ideal for use with TEKS® screws.
• Helical-cut steel, heat-treated gears for long life and durability.
• Metal gear housing for increased durability.
• Depth-sensitive "set and forget" nosepiece for consistent fastener depth.
• Rubber grip and two-finger, rubber trigger for increased comfort.
Specifications
Volts: 120 V AC
Max. Amps: 6.5 Clutch: Standard
No Load Speed: 0-2,500 rpm Torque: 132 in-lbs
Max Fastener Size: #14 Weight: 3.5 lbs.
Part No. Description
DW266 VSR Depth Sensitive Screwdriver
DW266
ROOFERS
CHOICE
315
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
POWER BITS & NUT DRIVERS
Insert Bit Holders
For ¼” Hex Insert Bits
Shank Size: Standard ¼”
Hex Drive
Size Part No.
1/4 X 3 25D300MBH
1/4 X 3 25D300MBH
1/4 X 4 25D400MBH
1/4 X 6 25D600MBH
1/4 X 8 25D800MBH
Point Overall Part
Size Length No.
1 1-15/16 1N193PPB
1 2-3/4 1N275PPB
1 3-1/2 1N350PPB
2 1-15/16 2N193PPB
2 2-3/4 2N275PPB
2 3-1/2 2N350PPB
2 6 2N600PPB
3 1-15/16 3N193PPB
3 2-3/4 3N275PPB
3 3-1/2 3N350PPB
Phillips Power Bit
1/4” Hex Shank Phillips Bits
Point Overall Part
Size Length No.
0 1 0N100PIB
1 1 1N100PIB
1 1 1N100PIB/LC
2 1 2N100PIB
2 1 2N100PIB/LC
2 1-1/2 2N150PIB
2 2 2N200PIB
3 1 3N100PIB
Phillips Insert Bits
1/4" Hex Limited
Insert Bits Clearance Bit
Point Overall Part
Size Length No.
0 1 0NSQI
1 1 1N100SQI
1 1-15/16 1N193SPB
2 1 2N100SQI
2 1-15/16 2N193SPB
3 1-15/16 3N193SPB
3 3 3N100SQI
Square Insert Bit
1/4” Hex Shank Insert Bits
Point Overall Part
Size Length No.
7 1 7N100TOB
8 1 8N100TOB
9 1 9N100TOB
10 1 10N100TOB
15 1 15N100TOB
20 1 20N100TOB
25 1 25N100TOB
27 1 27N100TOB
30 1 30N100TOB
40 1 40N100TOB
Torx® Bits
1/4” Hex Shank Insert Bits
LONG
Hex Overall Part
Size Length No.
3/16 1-5/8 18D162MNS
1/4 1-5/8 25D162MNS
5/16 1-5/8 31D162MNS
3/8 1-5/8 37D162MNS
7/16 1-5/8 43D162MNS
Hex Overall Part
Size Length No.
3/16 2-9/16 18D256MNS
1/4 2-9/16 25D256MNS
1/4 6 25D600MNS
5/16 2-9/16 31D162MNS
5/16 3-3/16 31D318MNS
5/16 6 31D600MNS
3/8 2-9/16 37D256MNS
7/16 2-9/16 43D256MNS
1/4” Hex Drive Nut Setters
Magnetic for Driving Hex Head
Self Drilling Fasteners
SHORT
38-Piece Universal
Quik-Lok® Drill and Drive Set
• Universal Quik-Lok®
• Premium Grade S2 Tool Steel Screw-
driver Bits - durable composition for
longer bit life
• Titanium Hex Shank Drill Bits - long life
and superior performance
• Magnetic Nut Drivers - ideal for fast,
easy driving of nuts, bolts and hex head
screws
Part No. Description
48-32-1500 38-PC Universal Quik-Lok
Drill & Drive Set
21-Piece Universal
Quik-Lok® Drill and Drive Set
Part No. Description
48-32-0321 21-PC Universal Quik-Lok
Drill & Drive Set
Power Bits & Nut Setters
316 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED IMPACT DRIVERS / WRENCHES
1/2" Impact Wrench
• 300 ft. lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor
• Balanced feel and cushioned grip.
• Friction ring ('hog' ring) socket retention
system.
Specifications
Volts: 120 V AC
Max. Amps: 7.0
No Load Speed: 1,800 rpm
No Load BPM: 2,600 bpm
Torque: 300 ft.-lbs.
Drive Size: 1/2" Square
Socket Retention: Friction ('Hog') Ring
Weight: 6.0 lbs.
Part No. Description
9071-20 1/2" Impact Wrench
9071-20
1/2" Impact Wrench
• 300 ft. lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor, 1800 RPM and
2600 IPM (no load).
• Balanced feel and cushioned grip.
• Pin detent system to securely retain
sockets and adapters.
Specifications
Volts: 120 V AC
Max. Amps: 7.0
No Load Speed: 1,800 rpm
No Load BPM: 2,600 bpm
Drive Size: 1/2" Square
Socket Retention: Flat End Detent Pin
Weight: 6.0 lbs.
Part No. Description
9070-20 1/2" Impact Wrench
9070-20
7/16" Impact Wrench
• High torque - 315 ft. lbs.
• Quick-change 7/16 in. hex retention
system
• Bracket and steel ring for easy transport
• Great balance and soft-grip handle
• Variable speed switch for maximum user
control, 600-1,800 RPM
Specifications
Volts: 120 V AC
Max. Amps: 7.0
No Load Speed: 600-1,800 rpm
No Load BPM: 1000-2,600 bpm
Torque: 315 ft.-lbs.
Drive Size: 7/16" Hex
Socket Retention: Quik Change
Weight: 6.5 lbs.
Part No. Description
9092-20 7/16" Impact Wrench
9092-20
Heavy Duty
1/2" Impact Wrench
• 345 ft-lbs of deliverable torque in for-
ward and reverse.
• 1/2" detent pin anvil.
• AC/DC forward/reverse rocking switch
• Soft grip handle for superior ergonomics
• Ball bearing construction for increased
durability.
• Excellent ergonomics.
Specifications
Volts: 120 V AC
AMPS: 7.5 Amps
No Load Speed: 2,100 rpm
Impacts/Min: 2,700 ipm
Torque: 345 ft.-lbs.
Weight: 7.0 lbs.
Part No. Description
DW292 1/2" Impact Wrench
DW292K 1/2" Impact Wrench w/Kit Box
DW292
Heavy Duty
3/4" Impact Wrench
• Easy forward or reverse, can run on AC
or DC current
• Ball bearing construction for increased
durability
• High torque level for heavy-duty fasten-
ing applications - 434 ft. lbs.
• Externally replaceable brushes for easy
serviceability.
• Includes 360° handle
• Excellent ergonomics.
Specifications
Volts: 120 V AC
AMPS: 7.5 Amps
No Load Speed: 1,600 rpm
Impacts/Min: 1,800 ipm
Torque: 434 ft.-lbs.
Weight: 11.0 lbs.
Part No. Description
DW297 3/4" Impact Wrench
DW297
3/4" Impact Wrench
• 380 ft.-lbs. of torque.
• AC/DC rocker switch for quick selection
of forward and reverse.
• Powerful 7.0 amp motor
• Balanced feel and cushioned grip.
• Friction ring and through hole socket
retention system.
Specifications
Volts: 120 V AC
Max. Amps: 7.0
No Load Speed: 1,750 rpm
No Load BPM: 2,600 bpm
Drive Size: 1/2" Square
Torque: 380 ft._lbs.
Socket Retention: Friction ('Hog') Ring
Weight: 6.0 lbs.
Part No. Description
9075-20 1/2" Impact Wrench
9075-20
4
317
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED HAMMER DRILLS / BITS
1/2" Pistol Grip, Dual Torque Hammer Drill
• 1/2 in. Capacity, 7.5 amp motor.
• Trigger speed control in two ranges: 0-1350 rpm, 0-22,000
bpm, 0-2500 rpm, 0-40,000 bpm, reversing.
• Hammer with rotation or rotation only.
• Self-stop brush system.
• Includes depth guage, Side handle, Chuck key and Impact-resis-
tant carrying case.
Specifications
Volts: 120 V AC
Max. Amps: 7.5
No Load Speed: 0-1,350/0-2,500 rpm
No Load BPM: 0-20,000/0-40,000 bpm
Chuck Type: Keyed
Weight: 6.0 lbs.
Part No. Description
5378-20 1/2" Pistol Grip, Dual Torque Hammer Drill
1/2" Dual-Speed Hammer Drill Kit
• 1/2 in. capacity; 7.5 amp motor.
• Trigger speed control in two ranges: 0-1350 rpm, 0-22,000
bpm; 0-2500 rpm, 0-40,000 bpm; reversing.
• Hammer with rotation or rotation only.
• Self-stop brush system.
• KIT Includes depth guage, Side handle, Chuck key and Impact
resistant carrying case.
• Tool includes Depth guage, Side handle,
Specifications
Volts: 120 V AC
Max. Amps: 8.5
No Load Speed: 0-1,000/0-2,500 rpm
No Load BPM: 0-16,000/0-40,000 bpm
Chuck Type: Keyed
Weight: 6.4 lbs.
Part No. Description
5387-22 1/2" Dual Speed Hammer Drill Kit
5387-20 1/2" Dual Speed Hammer Drill Tool only
4-piece Hex Shank Carbide Tipped Hammer-Drill Bit Set
48-20-6850 Set includes one each of: 48-20-6805, 48-20-6810,
48-20-6815 and 48-20-6820
6-piece Hex Shank Carbide Tipped Hammer-Drill Bit Set
48-20-6851 Set includes one each of: 48-20-6805, 48-20-6810,
48-20-6811, 48-20-6815 and 48-20-6820
Hex shank for more secure chuck grip
Hex shanks can be gripped more firmly than round shank bits,
therefore reducing the likelihood of slipping. Use these bits for
drilling primarily softer materials such as masonry, brick, block,
softer aggregate concrete, etc. Use with hammer-drills that have
a 3 jaw chuck.
5378-21
5387-22
Carbide Tipped Hex Shank
Hammer-Drill Bits
Size
Dia.x U.L. x O.L.
( Inches )
Individual
Bit
Part No.
Bulk Bits
Part No.
Bulk Qty
per Pack
1/8 x 1-1/2 x 3 48-20-6800 48-20-6900 25
3/16 x 1-1/2 x 4 48-20-6805 48-20-6905 25
3/16 x 4-1/2 x 6 48-20-6806 48-20-6906 25
1/4 x 2-1/2 x 4 48-20-6810 48-20-6910 25
1/4 x 4-1/2 x 6 48-20-6811 48-20-6911 25
5/16 x 2-1/2 x 4 48-20-6815 48-20-6915 25
5/16 x 4-1/2 x 6 48-20-6816 — —
3/8 x 2-1/2 x 4 48-20-6820 48-20-6920 20
3/8 x 4-1/2 x 6 48-20-6821 48-20-6921 20
3/8 x 12 x 13-1/2 48-20-6823 — —
7/16 x 4-1/2 x 6 48-20-6825 — —
1/2 x 4-1/2 x 6 48-20-6830 48-20-6930 15
1/2 x 12 x 13-1/2 48-20-6833 — —
9/16 x 4-1/2 x 6 48-20-6835 — —
5/8 x 4-1/2 x 6 48-20-6840 — —
5/8 x 12 x 13-1/2 48-20-6843 — —
3/4 x 4-1/2 x 6 48-20-6845 -— —
318 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED SDS ROTARY HAMMERS
3/4" SDS Drive Pistol Grip Rotary Hammer
• Two modes of operation: rotation with hammering and rotation only.
• Speed control switch allows more accurate hole positioning.
• Lightweight, compact 13 in. length and well balanced design including an ergonomically
shaped cushioned grip.
• Includes depth gauge, side handle and carrying case.
Specifications
Volts: 120 V AC No Load Speed: 0-1,270 rpm, Reversing
Max. Amps: 6.0 No Load BPM: 0-5,000 bpm
Impact Energy: 1.7 ft.-lbs. Weight: 11.9 lbs.
Part No. Description
5383-21 3/4" SDS Drive Pistol Grip Rotary Hammer
5383-21
BOSCH 7/8" SDS-plus Bulldog Rotary Hammer
• 360° Auxiliary handle with built-in depth gauge.
• D-handle design.
• Integral clutch — helps minimize torque reaction
• 3 modes of operation, rotation only, rotary hammer and hammer only mode
• Variable-speed reversing trigger — for accurate bit starting, as well as removing fasteners
or bound bits.
• Vario-Lock™ positioning — rotates and locks chisel into 36 different positions to optimize
working angle.
Specifications
Volts: 120 V AC No Load Speed: 0-1,150 rpm, Reversing
Max. Amps: 6.9 No Load BPM: 0-6,150 bpm
Weight: 6.5 lbs.
Part No. Description
11224VSR 7/8" SDS Plus Bulldog Rotary Hammer
11224VSR
7/8" Compact SDS Drive Pistol Grip Rotary Hammer
• Lightweight design for easy use and handling in a variety of orientations
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• Reversing feature helps release tool from bind up situations, and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• 360° side handle adjusts easily for preference or use in tight spaces
• Pistol grip design for preferred balance in multiple orientations
• Includes depth gauge, side handle and carrying case.
Specifications
Volts: 120 V AC No Load Speed: 0-1,150 rpm, Reversing
Max. Amps: 6.0 No Load BPM: 0-4,150 bpm
Impact Energy: 1.8 ft.-lbs. Weight: 5.2 lbs.
Part No. Description
D25012K 7/8" Compact SDS Drive Pistol Grip Rotary Hammer
D25012K
COMPACT
7/8" Compact SDS Drive D-Handle Rotary Hammer
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• Lightweight design for easy use and handling in a variety of orientations
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Reversing feature helps release tool from bind up situations and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• 360° side handle adjusts easily for preference or use in tight spaces
• D-handle design offers preferred balance for downward drilling
• Includes depth gauge, side handle and carrying case.
Specifications
Volts: 120 V AC No Load Speed: 0-1,550 rpm, Reversing
Max. Amps: 6.9 No Load BPM: 0-4,550 bpm
Impact Energy: 1.8 ft.-lbs. Weight: 5.5 lbs.
Part No. Description
D25023K 7/8" Compact SDS Drive Pistol Grip Rotary Hammer
D25023K
COMPACT
319
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED SDS ROTARY HAMMERS
1" D-Handle SDS Plus Hammer - Single & 3-Mode
• Reverse feature assists in the removal of fasteners.
• Variable speed allows for precise hole placement on work surface.
• Factory set clutch reduces sudden, high torque reactions if bit jams.
• 360° side handle adjusts easily for preference or use in tight spaces.
• Includes depth gauge, side handle & carrying case.
Specifications
Volts: 120 V AC No Load Speed: 0-1,400 rpm, Reversing
Max. Amps: 8.0 Loaded Speed: 0-850 bpm
Impact Energy: 2.2 ft.-lbs. No Load BPM: 0-5,980 bpm
Chipping - D25211K: No Weight: 11.9 lbs.
Chipping - D25213K: Yes
Part No. Description
D25211K 1" D-Handle Single Mode SDS Plus Hammer
D25213K 1" D- Handle 3-Mode SDS Plus Hammer
D25211K
1" Pistol Grip SDS-Plus Hammer - Single & 3-Mode
• Reverse feature assists in the removal of fasteners.
• Variable speed switch (VSR) allows for precise hole placement on work surface.
• Factory set clutch reduces sudden, high torque reactions if bit jams.
• 360° side handle adjusts easily for preference or use in tight spaces.
Specifications
Volts: 120 V AC No Load Speed: 0-1,150 rpm, Reversing
Max. Amps: 8.0 Loaded Speed: 0-850 bpm
Impact Energy: 2.5 ft.-lbs. No Load BPM: 0-4,300 bpm
Chipping - D25111K: No Weight: 5.72 lbs.
Chipping - D25113K: Yes
Part No. Description
D25111K 1" Pistol Grip, Single Mode SDS Plus Rotary Hammer
D25113K 1" Pistol Grip, 3-Mode SDS Plus Rotary Hammer
D25113K
1" Compact SDS Rotary Hammer w/Anti-Vibration
• All metal gear case and block construction.
• Anti-Vibration System, soft grip handle and two-finger trigger for optimal comfort.
• Three modes of operation - Hammerdrill / Drill / Chipping for maximum versatility.
• Rotating Brush Plate for equal power in forward and reverse.
• Compact and lightweight L-shape design.
• Includes depth gauge, side handle & carrying case.
Specifications
Volts: 120 V AC No Load Speed: 0-1,400 rpm, Reversing
Max. Amps: 7.0 No Load BPM: 0-5,980 bpm
Impact Energy: 2.0 ft.-lbs. Weight: 11.9 lbs.
Part No. Description
5363-21 1" SDS Rotary Hammer with Vibration Control
5363-21
COMPACT
1" D-Handle SDS Plus Hammer - w/SHOCKS Active Vibration Control
• Variable speed trigger allows user to instantly control speed from 0 to dialed setting
• SHOCKS – Active Vibration Control® reduces vibration up to 50%
• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
• Reversing feature helps release tool from bind up situations, and aids with removal of fasteners
• Integral clutch reduces sudden, high torque reactions if bit jams
• User preferred balance for downward drilling
• Includes depth gauge, side handle & carrying case
Specifications
Volts: 120 V AC No Load Speed: 0-1,150 rpm, Reversing
Max. Amps: 8.0 Loaded Speed: 0-850 bpm
Impact Energy: 2.5 ft.-lbs. No Load BPM: 0-4,300 bpm
Chipping: Yes Weight: 7.0 lbs.
Part No. Description
D25223K 1" D-Handle SDS Plus Hammer w/ SHOCKS Active Vibration Control
D25223K
320 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
1-1/8" L-Shaped SDS Rotary Hammer
• Three modes of operation: rotation with hammering, hammer-only
and rotation-only.
• Speed control switch allows more accurate hole positioning.
• Lightweight, compact 14 in. length and well balanced design.
• Includes depth guage, Side handle & Carrying case.
Specifications
Volts: 120 V AC Impact Energy: 2.5 ft.-lbs.
Max. Amps: 7.4 No Load Speed: 0-980 rpm
Reversing
No Load BPM: 0-4,200 bpm Weight: 8.3 lbs.
Part No. Description
5359-21 1-1/8" L-Shaped SDS Rotary Hammer
5359-21
BOSCH 1" SDS-plus Bulldog EXTREME Rotary Hammer
• Multi-function Selector — 3 modes of operation, rotation only,
rotary hammer and hammer-only mode.
• Vario-Lock™ positioning — rotates and locks chisel into 36 dif-
ferent positions to optimize working angle.
• SDS-plus® bit system — tool-free bit changes with automatic bit
locking, dust protection and maximum impact energy transfer rate.
• D-Handle design — Ideal for overhead and downward drilling.
• Variable-speed Reversing Trigger — For accurate bit starting as
well as removing fasteners or bound bits.
Specifications
Volts: 120 V AC No Load Speed: 0-1,300 rpm
Amps: 7.2 Amps Blows/Min: 0-5,800 bpm
Weight: 6.5 lbs.
Part No. Description
11255VSR 1" SDS Plus Bulldog Rotary Hammer
11255VSR
1" L-Shaped SDS Plus Hammers
• L-Shape design offers superior balance and control.
• 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping.
• Lightweight design provides comfort for extended use.
• Dust extraction connection allows the use of the D25300D dust
collection system.
• Hammer-only mode allows user to perform light chipping applications.
Additional Features for Model D25314K:
• Quick Change Removable Chuck allows easy replacement of
SDS or 3-Jaw Keyless Chuck (included for drilling).
• "Rotation Only Mode" allows use for wood and metal drilling.
Specifications
Volts: 120 V AC Amps: 8.0 Amps
Impact Energy: 2.5 ft/lbs No Load Speed: 0-1,150 rpm
Chipping: Yes Loaded Speed: 0-850 rpm
Switch: VSR Blows/Min: 0-4,300 bpm
Weight: 6.5 lbs. (D25313K) / 6.8 lbs. (D25314K)
Part No. Description
D25313K 1" SDS Plus Single-Mode Hammer
D25314K 1" SDS Plus 3-Mode Hammer
D25314K
CORDED SDS ROTARY HAMMERS
D25323K
1" L-Shaped SDS Plus Hammers
with SHOCKS - Active Vibration Control
• L-Shape design offers superior balance and control.
• 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping.
• Lightweight design provides comfort for extended use.
• Dust extraction connection allows the use of the D25300D dust
collection system.
• Hammer-only mode allows user to perform light chipping applications.
Additional Features for Model D25324K:
• Quick Change Removable Chuck allows easy replacement of
SDS or 3-Jaw Keyless Chuck (included for drilling).
• "Rotation Only Mode" allows use for wood and metal drilling.
Specifications
Volts: 120 V AC Amps: 8.0 Amps
Impact Energy: 2.5 ft/lbs No Load Speed: 0-1,150 rpm
Chipping: Yes Loaded Speed: 0-850 rpm
Switch: VSR Blows/Min: 0-4,300 bpm
Weight: 7.5 lbs. (D25323K) / 7.8 lbs. (D25324K)
Part No. Description
D25323K 1" SDS Plus Single-Mode Hammer
D25324K 1" SDS Plus 3-Mode Hammer
321
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SDS CARBIDE BITS / ACCESSORIES
Premium SDS Hammer Bits
2-Cutter
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
5/32 x 2 x 4-1/2 7400
5/32 x 4 x 6 7401
3/16 x 2 x 4-1/2 7410
3/16 x 4 x 6 7411
3/16 x 6 x 8 7412
3/16 x 8 x 10 7413
3/16 x 10 x 12 7414
3/16 x 12 x 14 7415
3/16 x 14 x 16 7416
7/32 x 4 x 6 7421
7/32 x 6 x 8 7422
7/32 x 9 x 11 7424
7/32 x 12 x 14 7425
7/32 x 14 x 16 7426
1/4 x 2 x 4-1/2 7530
1/4 x 4 x 6 7531
1/4 x 6 x 8 7532
1/4 x 9 x 11 7534
1/4 x 12 x 14 7535
1/4 x 14 x 16 7536
1/4 x 18 x 20 7538
5/16 x 4 x 6 7441
5/16 x 10 x 12 7444
Tip — Aggressive Geometry
• Centering Point – More accurate starting of holes.
• Unique Edge Design – Allows cutting mesh and small diameter
re-bar with less likelihood of tip breakage.
• Unique Face Design – Directs concrete dust into the flute’s
pick up area quickly for faster drilling.
• Chisel Design – Distinctive chisel shape efficiently penetrates
concrete, improving drilling speed.
Flutes — More Rigid / Better Dust Extracting Multi-Fluted
Spiral Execution
• Four Fluted Spiral – Removes concrete dust faster.
• Shaft Strength – Improved for less bending / breakage.
• Drilling is Smoother – Due to less vibration.
• More Efficient – More energy of the hammer blow is transmitted
to the tip to improve drilling speed.
2-Cutter
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
3/8 x 4 x 6 7451
3/8 x 6 x 8 7452
3/8 x 8 x 10 7453
3/8 x 10 x 12 7454
3/8 x 16 x 18 7457
3/8 x 22 x 24 7459
7/16 x 4 x 6 7461
7/16 x 10 x 12-1/2 7464
7/16 x 16 x 18 7467
1/2 x 4 x 6 7471
1/2 x 8 x 10 7473
1/2 x 10 x 12 7474
1/2 x 16 x 18 7477
1/2 x 22 x 24 7479
9/16 x 4 x 6-1/2 7481
9/16 x 10 x 12-1/2 7484
9/16 x 16 x 18 7487
5/8 x 4 x 6 7601
5/8 x 6 x 8 7602
5/8 x 10 x 12 7604
5/8 x 16 x 18 7607
5/8 x 22 x 24 7609
Individual SDS Hammer Bits
Centering Point
and Edge Cutting
Chisel Shaped
Drill Head
2-Cutter
Bulk Bits
(25/Pack)
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
5/32 x 2 x 4-1/2 7500
5/32 x 4 x 6 7501
3/16 x 2 x 4-1/2 7510
3/16 x 4 x 6 7511
3/16 x 6 x 8 7512
3/16 x 8 x 10 7513
3/16 x 10 x 12 7514
3/16 x 12 x 14 7515
3/16 x 14 x 16 7416
7/32 x 4 x 6 7521
7/32 x 6 x 8 7522
7/32 x 9 x 11 7524
7/32 x 12 x 14 7525
7/32 x 14 x 16 7526
1/4 x 2 x 4-1/2 7530
1/4 x 4 x 6 7531
1/4 x 6 x 8 7532
1/4 x 9 x 11 7534
1/4 x 12 x 14 7535
1/4 x 14 x 16 7536
5/16 x 4 x 6 7541
3/8 x 4 x 6 7551*
3/8 x 10 x 12 7554*
1/2 x 4 x 6 7571**
1/2 x 10 x 12 7574**
5/8 x 6 x 8 7702†
* Contains 20 per pack
** Contains 15 per pack
† Contains 10 per pack
2-Cutter
Monster Packs
(200/Pack)
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
3/16 x 2 x 4-1/2 7510
3/16 x 4 x 6 7511
1/4 x 2 x 4-1/2 7530
1/4 x 4 x 6 7531
5/16 x 4 x 6 7541*
3/8 x 4 x 6 7551**
1/2 x 4 x 6 7571†
* Contains 150 per pack
** Contains 125 per pack
† Contains 100 per pack
Bulk SDS Hammer Bits
Bulk Packaging Saves Time and Money!
5-Pc 44-Magnum™
Carbide-Tipped Bit Set
48-20-7490
Includes:1 each diameter bit:
• 3/16" x 4-1/2"
• 1/4" x 6"
• 5/16" x 6"
• 3/8" x 6"
• 1/2" x 6"
322 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SDS CARBIDE BITS / ACCESSORIES
Heavy-Duty SDS Hammer Bits
2-Cutter
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
11/16 x 6 x 8 7058
3/4 x 6 x 8 7061
3/4 x 8 x 10 7063
3/4 x 10 x 12 7065
3/4 x 16 x 18 7066
3/4 x 22 x 24 7067
7/8 x 6 x 8 7071
7/8 x 10 x 12 7072
7/8 x 16 x 18 7075
1 x 8 x 10 7080
1 x 16 x 18 7085
4-Cutter
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
5/8 x 6 x 8 7200
5/8 x 10 x 12 7203
5/8 x 16 x 18 7206
3/4 x 6 x 8 7210
3/4 x 10 x 12 7215
3/4 x 16 x 18 7220
7/8 x 6 x 8 7225
7/8 x 10 x 12 7230
7/8 x 16 x 18 7236
1 x 8 x 10 7240
1 x 16 x 18 7246
1-1/8 x 8 x 10 7530
1-1/8 x 16 x 18 7531
Stop Overdrilling Holes
for Drop-ins & Mini-Dropins
SDS -Bit
Part No. Description Anchor Size
For Standard Dropin Anchors
207STP-6-17 3/8" x 1-1/16" Stop-Bit 1/4"
207STP-8-27 1/2" x 1-11/16" Stop-Bit 3/8"
207STP-10-33 5/8" x 2-1/16" Stop-Bit 1/2"
For Mini Dropin Anchors
207STP-10-19 5/8" x 1-3/16" Stop-Bit 1/2"
207STP-8-13 1/2" x 13/16" Stop-Bit 3/8"
Solid Carbide Head SDS+ Bits
4-Cutter Solid
Carbide Tipped
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
3/16 x 2 x 4 7310
3/16 x 4 x 6 7311
3/16 x 6 x 8 7312
3/16 x 8 x 10 7313
3/16 x 10 x 12 7314
1/4 x 2 x 4 7330
1/4 x 4 x 6 7331
1/4 x 6 x 8 7332
1/4 x 9 x 11 7334
1/4 x 12 x 14 7335
4-Cutter Solid Carbide Tip
• MX4 Carbide Drill Bits feature a solid carbide tip for
maximum strength and centering tip for more accurate hole
placement
• 3X Longer life than competitors when drilling in reinforced
concrete.
• 90° Cutter alignment resists locking-up in rebar
• Spiraled flutes remove debris quickly and provide impact
durability
Compare to Hilti TEC3X Bits
Individual MX4 SDS+ Hammer Bits
4-Cutter Solid
Carbide Tipped
Individual Bits
Size (In)
Dia. x U.L. x O.L.
Part
No.
48-20-
5/16 x 4 x 6 7341
3/8 x 4 x 6 7351
3/8 x 10 x 12 7354
3/8 x 16 x 18 7357
1/2 x 4 x 6 7371
1/2 x 10 x 12 7374
1/2 x 16 x 18 7377
SDS-Plus Accu-Bit for 3/8" Dropin
& Mini Dropin Anchors
Drill precise depth holes in concrete for 3/8" Dropin and 3/8"
Mini Dropin anchors.
Part No. Description Anchor Size
0397 1/2" Accu-Bit for Dropin Anchors 3/8"
0398 1/2" Accu-Bit for Mini Dropin Anchors 3/8"
0397 SDS-PLUS ACCU-BIT
for 3/8" Drop-In anchors
0398 SDS-PLUS ACCU-BIT for
3/8" MINI Drop-In anchors
323
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SDS CARBIDE BITS / ACCESSORIES
Size
Dia.x U.L. x O.L.
( Inches )
Individual
Bit
Part No.
Bulk Bits
Part No.
Bulk Qty
per Pack
5/32 x 2 x 5 48-20-7090 — 25
5/32 x 3 x 6 48-20-7096 48-20-7196 25
5/32 x 4 x 7 48-20-7091 48-20-7191 25
3/16 x 2 x 5 48-20-7097 — 25
3/16 x 3 x 6 48-20-7098 48-20-7198 25
3/16 x 4 x 7 48-20-7092 48-20-7192 25
2-Cutter SDS Bits - with Hex Shoulder
for Tap-Con® Screw System
Adapters
Spline to SDS Adapter
48-03-3015
SDS-MAX to SDS Adapter
48-03-3025
SDS Rebar Cutters
Non-Removable Shank Rebar Cutters
The answer to drilling through concrete-embedded rebar!
No more broken or shattered hammer bits; now you can drill
through the rebar and not have to relocate the hole to avoid
the rebar!
Diameter Length Hex Shank
P/N
SDS Shank
P/N Rec. RPM
3/8" 8" RB-6 SB-6 850-1200
1/2" 12" RB-8 SB-8 850-1200
9/16" 12" RB-9 SB-9 850-1200
5/8" 12" RB-10 SB-10 750-1000
5/8" 18" RB-10-18 SB-10-18 750-1000
11/16" 12" RB-11 SB-11 750-1000
3/4" 12" RB-12 SB-12 600-800
3/4" 18" RB-12-18 SB-12-18 600-800
13/16" 12" RB-13 SB-13 600-800
* Removable Shank Cutters - Available - Call for More Info
The SDS Bit for Volume Users
Available in Bulk Pack (Standard Box) quantities only - with
the volume user in mind. Manufactured to conform to ANSI
standard B212.15 and can be used in concrete, block brick and
soft stone. Sold in Standard box or carton quantities only.
2-Cutter Bits
Value Paks
Size (In)
Dia. x U.L. x O.L. Part No.
Std
Box Carton
5/32 x 4 x 6 0801 25 500
3/16 x 2 x 4 0803 25 450
3/16 x 4 x 6 0805 25 500
3/16 x 6 x 8 0807 25 450
3/16 x 8 x 10 0809 25 300
7/32 x 4 x 6 0811 25 500
7/32 x 6 x 8 0813 25 450
7/32 x 8 x 10 0815 25 300
1/4 x 2 x 4 0817 25 450
1/4 x 4 x 6 0819 25 500
1/4 x 6 x 8 0821 25 450
1/4 x 8 x 10 0823 25 300
5/16 x 4 x 6 0825 25 500
3/8 x 4 x 6 0827 25 300
1/2 x 4 x 6 0829 15 180
5/8 x 6 x 8 0831 15 120
Industrial Grade SDS Bits Value Paks
Description Individual
Bit Part No.
Bulk Bit
Part no.
Bull Point
Starts holes in
concrete slabs,
general chipping &
breaking. 10" L.
48-62-6010 48-62-6110
(25/Box)
Flat Chisel
General chipping
and breaking
work. 3/4" x 10".
48-62-6015 48-62-6015
(25/Box)
Scaling Chisel
Wide chisel with
(2) 60° cutting
angles. Cleans
concrete, scale &
rust, cuts troughs
& some asphalt.
1-1/2" x 10".
48-62-6020 48-62-6120
(25/Box)
SDS (or SDS Plus) Hammer Steel
(for chipping and chiseling)
324 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED SDS-MAX HAMMERS
D25600K
1-3/4" SDS MAX Rotary Hammer Kit
• 11.5 Amp motor delivers high output and overload protection.
• Electronic Variable Speed controls of the speed of drilling and chipping.
• 8 ft-lbs of impact energy provides fast drilling and powerful chipping
• Rubber grip helps reduce the level of vibration felt by the user.
• Factory clutch helps reduce the tools reaction to embedded
steel when bits "lock-up" while in operation.
• Includes: 360° side handle, depth rod and kit box.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
Impact Energy: 8.0 ft/lbs
Chipping: Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight: 13.4 lbs.
Part No. Description
D25600K 1-3/4" SDS-MAX Rotary Hammer
1-3/4" SDS MAX Rotary Hammer Kit
• 14 Amp provides best in class power and highest overload protection.
• 8.8 ft/lbs impact energy - delivers hard hitting performance.
• 2 Speed Impact Mode- low reduces speed (350 RPM) and beats
per minute (2,200 BPM) for light materials
• Constant Power Technology- maintains drilling speed and power
when the tool is under load.
• Mechanical Clutch - protects the gears and provides added control.
• Anti Vibration System - reduces user vibration / increases productivity.
Specifications
Volts: 120 V AC
Amps: 14.0 Amps
Impact Energy: 8.8 ft/lbs
No Load Speed: 350-450 rpm
Loaded Speed: 2,200-2,800 bpm
Part No. Description
5426-21 1-3/4" SDS-MAX Rotary Hammer
5426-21
1-9/16" SDS MAX Rotary Hammer Kit
• 11.0 Amp motor delivers high output and overload protection.
• Electronic Variable Speed allows the user to control the speed
of drilling and chipping.
• 7.3 ft-lbs of impact energy provides fast drilling and powerful chipping
• Rubber grip helps reduce the level of vibration felt by the user.
• Factory clutch helps reduce the tools reaction to embedded
steel when bits "lock-up" while in operation, preventing injury.
• Includes: 360° side handle, depth rod and kit box.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
Impact Energy: 7.3 ft/lbs
Chipping: Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight: 13.0 lbs.
Part No. Description
D25500K 1-9/16" SDS-MAX Rotary Hammer
D25500K
1-7/8" SDS MAX Rotary Hammer Kit
• Complete Torque Control (CTC) utilizes patented 2-stage clutch
for maximum control in bind-up situations.
• SHOCKS™ - Active Vibration Control reduces vibration by up to 70%.
• Lock-on switch reduces user fatigue while chipping.
• 13 Amp motor provides maximum overload protection & power.
• Includes: 360° side handle, depth rod and kit box.
Specifications
Volts: 120 V AC
Amps: 13.0 Amps
Impact Energy: 11.7 ft/lbs
Chipping: Yes
No Load Speed: 137-275 rpm
Loaded Speed: 1,262-2,520 bpm
Weight: 17.5 lbs.
Part No. Description
D25701K 1-7/8" SDS-MAX Rotary Hammer
D25701K
325
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED SDS MAX & SPLINE ROTARY HAMMERS
11248EVS
2" SDS-MAX Drive Rotary Hammer
• High Blow Energy 19.9 ft-lbs.
• User Friendly Vibration Isolation System
• Heavy-Duty Robust Construction.
• In-Line Design with 3 Side Handle Positions.
• Variable Speed Control Dial.
• Service Reminder Light.
• Soft-Grip on All Handles.
• Uses Standard SDS-max Accessories
• Includes Side handle & Carrying case.
Specifications
Volts: 120 V AC
Max. Amps: 15.0.
Impact Energy: 19.9 ft.-lbs.
No Load Speed: 125-250 rpm,
No Load BPM: 975-1,950 bpm
Weight: 26.2 lbs.
Part No. Description
5342-21 2" SDS-MAX Rotary
Hammer
5342-21
2" SDS-MAX Rotary
Hammer
• 15 ft-lbs of impact energy provides maxi-
mum performance in drilling & chipping
• 15 Amp motor - maximum overload
protection & power
• Complete Torque Control (CTC)® -
2-stage clutch for maximum control in
bind-up situations
• SHOCKS™ - Active Vibration Control
reduces vibration by up to 70%
• Rear handle mount
• Lock-on slide switch
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Impact Energy: 15 ft/lbs
Chipping: Yes
No Load Speed: 125-250 rpm
Blows/Minute: 1,150-2,304 bpm
Weight: 19.2 lbs.
Part No. Description
D25730K 2"" SDS-MAX Rotary Hammer
D25730K
2" Spline Drive Rotary Hammer
• High Blow Energy 19.9 ft-lbs.
• User Friendly Vibration Isolation System
• Heavy-Duty Robust Construction.
• In-Line Design with 3 Side Handle Positions.
• Variable Speed Control Dial.
• Service Reminder Light.
• Soft-Grip on All Handles.
• Uses Standard Spline and Round/Hex
Accessories
• Includes Side handle & Carrying case.
Specifications
Volts: 120 V AC
Max. Amps: 15.0.
Impact Energy: 19.9 ft.-lbs.
No Load Speed: 125-250 rpm,
No Load BPM: 975-1,950 bpm
Weight: 26.2 lbs.
Part No. Description
5340-21 2" Spline Drive Rotary
Hammer
5340-21
D25550K
1-9/16" Spline Rotary
Hammer Kit
• Electronic Variable Speed allows the user to
control the speed of drilling and chipping.
• 7.3 ft-lbs of impact energy provides fast drill-
ing and powerful chipping.
• Rubber grip reduces the level of vibration.
• Factory clutch reduces the tools reaction
to embedded steel when bits "lock-up".
• Bit Lock allows user to unwind jammed bits.
• Includes: 360° side handle, depth rod
and kit box.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
Impact Energy: 7.3 ft/lbs
Chipping: Yes
No Load Speed: 140-280 rpm
Loaded Speed: 1,330-2,660 bpm
Weight: 14.5 lbs.
Part No. Description
D25550K 1-9/16" Spline Rotary Hammer
BOSCH 1-9/16" Spline Combination Hammer
• Spline/round hex bit system with automatic bit locking.
• Auto-Max® dial — variable speed dial.
• Constant Response & Service Circuitry – Provides
soft-start, maintains constant speed under load,
overload protection.
• "Combination" dual mode selector, rotary ham-
mer and hammer only mode.
• Turbo™ Power - 20% more power in hammer only mode.
• Service Minder™ light - indicates when preventa-
tive maintenance is required.
• Vibration dampening handle - reduces vibration
up to 40%.
• Vario-Lock™ positioning rotates and
locks chisel into 12 different positions to
optimize working angle.
Specifications
Volts: 120 V AC
Amps: 11 Amps
No Load Speed: 170-340 rpm
Blows/Min: 1,700-3,300 bpm
Weight: 14.4 lbs.
Part No. Description
11248EVS 1-9/16" Spline Combination
Hammer
326 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SDS-MAX / SPLINE CARBIDE BITS
SDS-Max Shank
Use in SDS-Max Drive rotary hammers. These bits
are for use in any kind of concrete or masonry.
Size (In)
Dia. x U.L. x O.L. 2-Cutter 4-Cutter
1/2 x 7-1/2 x 13 48-20-3902 —
1/2 x 15-1/2 x 21 48-20-3904 —
9/16 x 7-1/2 x 13 48-20-3910 —
9/16 x 15-1/2 x 21 48-20-3912 —
5/8 x 7-1/2 x 13 -— 48-20-3916
5/8 x 15-1/2 x 21 -— 48-20-3918
5/8 x 30-1/2 x 36 -— 48-20-3922
11/16 x 15-1/2 x 21 -— 48-20-3926
3/4 x 8 x 13 -— 48-20-3930
3/4 x 17 x 21 -— 48-20-3932
3/4 x 31 x 36 -— 48-20-3936
13/16 x 17 x 21 -— 48-20-3938
7/8 x 8 x 13 -— 48-20-3944
7/8 x 17 x 21 -— 48-20-3946
1 x 8 x 13 -— 48-20-3952
1 x 17 x 21 -— 48-20-3954
1 x 31 x 36 -— 48-20-3956
1-1/16 x 18 x 23 -— 48-20-3958
1-1/8 x 12 x 17 -— 48-20-3964
1-1/8 x 17 x 21 -— 48-20-3966
1-3/16 x 18 x 23 -— 48-20-3968
1-1/4 x 10 x 15 -— 48-20-3970
1-1/4 x 18 x 23 -— 48-20-3972
1-1/4 x 31 x 36 -— 48-20-3974
1-3/8 x 18 x 23 -— 48-20-3980
1-7/16 x 18 x 23 -— 48-20-3984
1-1/2 x 18 x 23 -— 48-20-3988
1-9/16 x 18 x 23 -— 48-20-3990
1-5/8 x 18 x 23 -— 48-20-3991
1-3/4 x 18 x 23 -— 48-20-3992
2 x 18 x 23 -— 48-20-3993
SDS-MAX Carbide Bits
Adapters
Spline to SDS Adapter
48-03-3015
SDS-MAX to SDS Adapter
48-03-3025
Spline Shank
Use in Spline Drive rotary hammers. These bits are
for use in any kind of concrete or masonry.
Size (In)
Dia. x U.L. x O.L. 2-Cutter 4-Cutter
3/8 x 5 x 10 48-20-4037 —
1/2 x 5 x 10 48-20-4050 —
1/2 x 11 x 16 48-20-4051 —
1/2 x 17 x 22 48-20-4052 —
1/2 x 22 x 27 48-20-4053 —
1/2 x 31 x 36 48-20-4054 —
9/16 x 5 x 10 48-20-4056 —
9/16 x 18 x 23 48-20-4057 —
5/8 x 5 x 10 48-20-4062 48-20-4300
5/8 x 11 x 16 48-20-4063 48-20-4305
5/8 x 17 x 22 48-20-4064 48-20-4310
5/8 x 24 x 29 — 48-20-4315
5/8 x 31 x 36 — 48-20-4320
11/16 x 11 x 16 48-20-4068 48-20-4325
3/4 x 5 x 10 48-20-4075 48-20-4330
3/4 x 11 x 16 48-20-4076 48-20-4335
3/4 x 17 x 22 48-20-4078 48-20-4340
3/4 x 24 x 29 — 48-20-4345
3/4 x 31 x 36 — 48-20-4350
13/16 x 11 x 16 48-20-4081 —
7/8 x 11 x 16 48-20-4087 48-20-4360
7/8 x 17 x 22 48-20-4088 48-20-4365
1 x 11 x 16 48-20-4100 48-20-4370
1 x 17 x 22 48-20-4101 48-20-4375
1x 31 x 36 -— 48-20-4380
1-1/8 x 11 x 16 48-20-4112 48-20-4385
1-1/8 x 17 x 22 48-20-4113 48-20-4390
1-1/4 x 11 x 16 48-20-4125 48-20-4395
1-1/4 x 17 x 22 48-20-4126 48-20-4400
1-1/4 x 31 x 36 — 48-20-4405
1-3/8 x 11 x 16 48-20-4137 —
1-3/8 x 17 x 22 48-20-4138 48-20-4410
1-1/2 x 11 x16 48-20-4150 —
1-1/2 x 17 x 22 48-20-4151 48-20-4415
1-3/4 x 18 x 23 — 48-20-4418
2 x 18 x 23 — 48-20-4419
Spline Shank Carbide Bits
327
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORE BITS
Thick Wall Carbide-Tipped Core Bits - SDS MAX & SPLINE
Thin Wall Carbide Tipped-Core Bits - SDS
+
Component
Systems
Dia.
(Inch)
Drilling
Depth
Core Body w/
Guide Plate &
Centering Pin
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Extension
7-1/2"
Replacement
Guide Plate
Replacement
Centering Pin
1-1/2 4-1/16 48-20-5125 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5168 48-20-5199
1-3/4 4-1/16 48-20-5130 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5169 48-20-5199
2 4-1/16 48-20-5135 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5170 48-20-5199
2-1/2 4-1/16 48-20-5140 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5171 48-20-5199
3 4-1/16 48-20-5145 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5172 48-20-5199
3-1/2 4-1/16 48-20-5150 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5173 48-20-5199
4 4-1/16 48-20-5155 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5174 48-20-5199
5 4-1/16 48-20-5160 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5175 48-20-5199
6 4-1/16 48-20-5165 48-03-3564 48-03-3565 48-03-3572 48-03-3573 48-95-6085 48-20-5176 48-20-5199
Component
Systems
Dia.
(Inch)
Drilling
Depth
Core Body w/
Guide Plate &
Centering Pin
Adapter
Shank
8" Length
Adapter
Shank
12" Length
Extension
7-1/2"
Replacement
Guide Plate
Replacement
Centering Pin
1 3-3/16 48-20-5005 48-03-3545 48-03-3551 48-95-6070 N/A* N/A*
1-1/8 3-3/16 48-20-5010 48-03-3545 48-03-3551 48-95-6070 N/A* N/A*
1-1/4 3-3/16 48-20-5015 48-03-3545 48-03-3551 48-95-6070 48-20-6151 48-20-6150
1-3/8 3-3/16 48-20-5020 48-03-3545 48-03-3551 48-95-6070 48-20-6152 48-20-6150
1-1/2 3-3/16 48-20-5025 48-03-3545 48-03-3551 48-95-6070 48-20-6153 48-20-6150
1-3/4 2-13/16 48-20-5030 48-03-3555 48-03-3561 48-95-6075 48-20-6156 48-20-6155
2 2-13/16 48-20-5035 48-03-3555 48-03-3561 48-95-6075 48-20-6157 48-20-6155
2-1/2 2-13/16 48-20-5040 48-03-3555 48-03-3561 48-95-6075 48-20-6158 48-20-6155
3 2-13/16 48-20-5045 48-03-3555 48-03-3561 48-95-6075 48-20-6159 48-20-6155
3-1/2 2-13/16 48-20-5050 48-03-3555 48-03-3561 48-95-6075 48-20-6160 48-20-6155
4 2-13/16 48-20-5055 48-03-3555 48-03-3561 48-95-6075 48-20-6161 48-20-6155
*Guide plate and
centering pin are
not included with
1" and 1-1/8"
diameter core bits.
Thin Wall Carbide-Tipped Core Bits - SDS MAX & SPLINE
Component
Systems
Dia.
(Inch)
Drilling
Depth
Core Body w/
Guide Plate &
Centering Pin
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Adapter
Shank
12" Length
Adapter
Shank
18" Length
Extension
7-1/2"
Replacement
Guide Plate
Replacement
Centering Pin
5 2-13/16 48-20-5060 48-03-3540 N/A 48-03-3574 N/A 48-95-6075 48-20-6162 48-20-6155
6 2-13/16 48-20-5065 48-03-3540 N/A 48-03-3574 N/A 48-95-6075 48-20-6163 48-20-6155
328 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DEMOLITION & BREAKER HAMMERS
BOSCH Brute™ Breaker Hammer
• Total portability – Operates on 15 Amp
115/120 VAC or 2500 W portable generator.
• ServiceMinder™ brush system — Shuts
off when brush replacement, lubrication
or preventative maintenance is needed.
• Shock mounted handles – Absorbs vibration.
• 2-way tool retainer – Accepts standard
1-1/8" hex, air tool steel with retaining col-
lar of Bosch internal locking combo steel.
• Kit includes Breaker Hammer, 2 Moil
Points, 2 Narrow Chisels, Hammer
Hauler Cart.
Specifications
Volts: 120 V AC
Max. Amps: 15.0.
Impact Energy: 43 ft.-lbs.
No Load BPM: 1400 bpm
Handle Span: 23-1/2"
Weight: 64 lbs.
Part No. Description
11304 Brute™ Breaker Hammer, only
11304K Brute™ Breaker Hammer Kit
with Hammer Steel
Demolition Hammers
• High Blow Energy – 19.9 ft-lbs
• User Friendly Vibration Isolation System
• In-Line Design with 3-Side Handle Positions
• Variable Speed Control Dial
• Service Reminder Light
• Soft-Grip on All Handles
• Lock-On Trigger
• Uses Standard 3/4 in. Hex Hammer Iron
or SDS-MAX Hammer iron
• Includes 2 auxiliary handles and case.
Specifications
Volts: 120 V AC
Amps: 14.0 Amps
Blow Energy: 19.9 ft.-lbs.
No Load BPM: 975 - 1,950 bpm
Bit Shank: 3/4" Hex or SDS-MAX
Weight: 24.2 lbs.
Part No. Description
5337-21 3/4" Hex Demolition Hammer
5339-21 SDS-MAX Demolition Hammer
5337-21 3/4" HEX
5339-21 SDS-MAX
SDS MAX Demolition Hammer
• Active Vibration Control (AVC) reduces
vibration.
• Non-air pumping beatpiece eliminates
masonry dust from entering the unit
extending tool and seal life.
• Variable Impact Control Dial ensures ac-
curate impact energy
• One-step chisel rotation (12 positions)
• Large rear rubber handle for easy opera-
tion with 1 or 2 hands.
• Variable position side handle allows 360°
rotation and 150° adjustment for ease of use.
• In-line design for easy operation in horizon-
tal or vertical applications.
• SDS Max toolholder with rubber damp-
ers absorb energy.
Specifications
Volts: 120 V AC
Amps: 14.0 Amps
Max Watts Out: 750 W
Loaded Speed: 1,020-2,040 bpm
Weight: 21.6 lbs.
Part No. Description
D25901K SDS-MAX Demolition Hammer
D25901K
BOSCH 35 lb. Breaker Hammer
• 35 lb. Class Leader.
• Highest removal rate in its class
• Active Vibration Control.
• Shock absorbing top handle.
• In-Line Design with multiple grip positions.
• Large main handle.
• 360° Articulating Auxiliary Handle.
• Carrying Case with Wheels.
• 2-way Tool Retainer, accepts standard
1-1/8" hex, air tool steel with retaining col-
lar or Bosch internal locking combo steel.
• Includes: Pointed Chisel, Articulating
Auxiliary Handle, Carrying Case with
Wheels, Grease tube, Cleaning rag.
Specifications
Volts: 120 V AC
Max. Amps: 15.0.
Impact Energy: 34 ft.-lbs.
No Load BPM: 1300 bpm
Weight: 38 lbs.
Part No. Description
11335K Brute™ Breaker Hammer
1-1/8" Hex
11335K 1-1/8" Hex
D25980K
Pavement Breaker
• 61 Ft-lbs impact
energy.
• SHOCKS - Active
Vibration Control.
• 15 amp motor.
• Rubber coated handles provide greater
comfort and control.
• Electronic soft start increases productivity.
• Hammer Truck provides easy transporta-
tion of pavement breaker.
• Includes (D25980K): Hammer Truck,
Flat Foot Plate for Hammer Truck,
Pegged Foot Plate for Hammer Truck, (2)
Bull point chisels, (1) 1" Cold Chisel, (1)
3" Wide Chisel
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Impact Energy: 750 W
Loaded Speed: 900 bpm
Weight: 68.3 lbs.
Part No. Description
D25980 Pavement Breaker, only
D25980K Pavement Breaker w/ Hammer
Truck and Steel
Breaker Hammers
1-1/8" Hex
329
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HAMMER STEEL
Use with breakers having 1-1/8" Hex Holders (Model 5338). All Shanks have
Internal Lock Recess.
Style (Working
End) Description Application Overall
Length Part No. Bulk Part
No.
Moil Point Starts holes in concrete slabs, general chipping
and breaking. 20" 48-62-4000 48-62-4100
(8/box)
Narrow Chisel General chipping and breaking work. 20-1/2" 48-62-4005 48-62-4105
(8/box)
3" Chisel
Wide chisel with (2) 60° cutting angles. Clean
concrete, scale and rust, cut troughs and some
asphalt.
20-1/2"
48-62-4010 48-62-4110
(8/box)
5" Asphalt
Cutter
Cuts asphalt or hard ground (Do not use for
concrete.) 17-1/2" 48-62-4020 48-62-4120
(6/box)
5-1/2" Clay
Spade
Digs clay, hard packed gravel, dirt. (Do not use
for concrete.) 20" 48-62-4030 48-62-4130
(5/box)
Ground Rod
Driver Drives ground rods. 15-1/2" x 3"
Deep 48-62-4045 N/A
Spike/Pin
Driver Drives anchoring pins for concrete forms. 14-1/2" 48-62-4040 N/A
Tamper Shank For use with 48-62-4050, 48-62-4055 and
48-62-4061. 15-1/2" 48-62-4060 N/A
Tamper Shank Compacts dirt, tamps asphalt. Use with
48-62-4060 shank.
6" x 6" 48-62-4050 N/A
8" x 8" 48-62-4055 N/A
Tent Stake
Driver
Used to Drive in large tent stakes. Use with
48-62-4060 shank.
5-1/2"L x
3-1/2" O.D. x
2-3/4" I.D.
48-62-4061 N/A
1-1/8" Collared Hex Shank with Notch
Description Individual
Bit Part No.
Bulk Bit
Part no.
Bull Point
Starts holes in
concrete slabs,
general chipping &
breaking. 10" L.
48-62-6010 48-62-6110
(25/Box)
Flat Chisel
General chipping
and breaking
work. 3/4" x 10".
48-62-6015 48-62-6015
(25/Box)
Scaling Chisel
Wide chisel with
(2) 60° cutting
angles. Cleans
concrete, scale &
rust, cuts troughs
& some asphalt.
1-1/2" x 10".
48-62-6020 48-62-6120
(25/Box)
SDS (or SDS Plus) Hammer Steel
(for chipping and chiseling)
Adapters
Spline to SDS Adapter
48-03-3015
SDS-MAX to SDS Adapter
48-03-3025
Be sure to visit
www.GoNefco.com
Online Catalog • Submittals
• New Products •
330 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HAMMER STEEL
Hammer Steel (for breaking,
digging, driving, etc.)
(Fits hammers having the
following bit reception
configurations)
SDS-Max Slotted
18 mm Round
Use with: 5313, 5346,
5314, 5337 & 5315
3/4" Hex With
21/32" Round
Use with: 5347, 5348,
5316, 5318, 5336, 5321
3/4" Hex
Use with: 5335, 5337
Style
(Working
End)
Description/
Application Size Part No. Bulk Part
No. Part No. Bulk Part
No. Part No. Bulk Part
No.
Bull Point - Starts
holes in concrete
slabs, general chipping
and breaking
12" 48-62-4075 48-62-4175
(25/box)
48-62-2000 48-62-2100
(25/box)
48-62-3000 48-62-3100
(25/box)
18" 48-62-4077 48-62-4177
(25/box)
48-62-2010 48-62-2110
(25/box)
48-62-3005 48-62-3105
(25/box)
Flat Chisel - General
chipping and breaking
1" x
12"
48-62-4079 48-62-4179
(25/box)
48-62-2020 48-62-2120
(25/box)
48-62-3010 48-62-3110
(25/box)
1" x
18"
48-62-4081 48-62-4181
(25/box)
48-62-2030 48-62-2130
(25/box)
48-62-3015 48-62-3115
(25/box)
Scaling Chisel - Wide
chisels with (2) 60°
cutting angel cleans
concrete, scale and
rust, cuts troughs and
some asphalt
1-1/2"
x 12"
48-62-4082 — 48-62-2040 — 48-62-3020 —
2" x
12"
48-62-4085 48-62-4185
(25/box)
48-62-2050 48-62-2150
(25/box)
48-62-3035 48-62-3135
(25/box)
3" x
12"
48-62-4087 48-62-4187
(25/box)
48-62-2055 48-62-2155
(25/box)
48-62-3030 48-62-3130
(25/box)
Slotting Tool - Breaks
out the "web" between
closely spaced drilled
holes to make a large
opening.
1-1/4"
x 15" 48-62-4073 — — — — —
1-1/2"
x 12" — — 48-62-2062 — — —
Seam Tool - Removes
mortar between brick,
or block; cut narrow
channels
1" x
15" 48-62-4080 — 48-62-2080 — — —
Bushing Tool - (1-pc.)
Removes excess concrete,
produces exterior finish,
roughens surface before
its surface coated
16
Tooth
Head
48-62-4065
1-3/4" sq x
10-1/2"
48-62-4165
(15/box)
1-3/4" sq x
10-1/2"
48-62-2070
1-3/4" sq x
9-3/4"
48-62-2170
(15/box)
1-3/4" sq x
9-3/4"
48-62-3085
1-3/4" sq x
9-3/4"
48-62-3185
(15/box)
1-3/4" sq x
9-3/4"
Asphalt Cutter - Cuts
asphalt or hard ground.
(Do not use for concrete)
5" x
16-
1/2"
48-62-4066 — — — 48-62-3090 —
Clay Spade - Digging clay,
hard packed gravel. (Do
not use for concrete)
4-1/2"
x
16-5/8"
48-62-4068 48-62-4168
(12/box)
48-62-2095 48-62-2195
(12/box)
48-62-3040 48-62-3140
(12/box)
Ground Rod Driver
- Drives soft ground
rods. Inside diameter is
.906 inches and 2-3/4"
deep socket
For
5/8"
and
3/4"
Rods
48-62-4091
9-3/4" L —48-62-2046
10" L —48-62-3070
9-3/4" L —
Tamper Plate Shank
Used to mount Tamper
Plate to tool.
12" 48-62-4092 — 48-62-2097 — 48-62-3065 —
Tamper Plate
Compacts dirt, tamping
asphalt.
5" Sq. 48-62-3060 — 48-62-3060 — 48-62-3060 —
SDS-MAX - 3/4" Hex and 3/4" Hex with Round
331
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUT-OFF SAWS / HIGH SPEED BLADES
Segmented Dry High Speed Blades - 10" Through 20" Diameter
SpeediCut Cut-Off Saws
Part No. Description
46799 20 mm to 1" Arbor Adapter
46903 Flat Saw Dolly with Water Tank - must be ordered
with P/N 46929 if water tank is used.
46929 Water Attachment Kit (standard)
01381 Quick Connect for Water Kit (fits standard garden hose)
WARNING: Operating the blade faster than the manufacturer’s max-
imum safe speed can damage the blade and possibly cause injury.
SpeediCut Saw Specifications
Model Number SC7312 SC7314 SC8116
Engine Displacement 4.5 4.5 4.9
Maximum Horsepower 5.6 5.6 6.2
No Load RPM 9,350 RPM 9,350 RPM 9,350 RPM
Max. Spindle Speed 4,300 RPM 4,300 RPM 3,750 RPM
Maximum torque 6.75 ft./lbs. 6.75 ft./lbs. 5.2 ft./lbs.
Carburetor Compensating fixed jet
Ignition System Electronic speed controlled
Starter System Recoil Starter
Clutch Auto Centrifugal
Fuel Mixture 50:1 (fuel/2-stroke oil)
Fuel Tank Capacity 37 oz.
Fuel consumption at max. load .55 g/h .55 g/h 2.3 g/h
Blade Capacity 12" 14" 16"
Arbor Diameter 1"/20mm Universal Arbor
Maximum Cutting Depth 3-13/16" 4-13/16" 5-3/4"
Max Blade Shaft RPM 4300 4300 3750
Weight (tanks empty w/o blade) 21 lbs. 21 lbs. 23.4 lbs.
Part No. Description
75753 Tool Kit (incl: Pouch, Universal wrench, torx wrench
and screwdriver)
52270 Wheel Kit (mounts on bottom of saw)
6060065 Filter (Foam)
6060064 Filter (Paper)
6060165 Starter Rope
6060127 Spark Plug
332 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MAGNETIC BASE PORTABLE DRILLS
Portable Drills
Model for Model - The Best
Value and Productivity Available
HMD115
The HMD115 is an ultra low profile, lightweight 21
lb. drill with a quill feed arbor. Handles operate from
either side and with handles removed, the hex head
allows use of a socket wrench for ratcheting the feed.
Handles lock for carrying. The arbor has a bayonet-style
twist and lock tool mounting for quick cutters change
outs. The HMD115 uses Rotaloc™ Annular Cutters. For
safety, the motor switch must be continuously pressed
during operation and the motor will not run without the
magnet switch "ON". Rear mounted controls optimize
ergonomics. Convenient carrying case and safety strap is
standard. The HMD111 is the 230V version.
Model No. 115
Electrical Rating 115V
60 Hz
8.0 Amp
No Load RPM 450
Hole
Capacity
Diameter 1/2" - 1-1/16"
Depth 3/4"
Arbor Bore Quick Shank
Dimensions Height 6-11/16"
Width 8-1/2"
Length 11-5/8"
Base Size 4" x 7"
Net Weight (approx.) 21.3 lb
HMD904
We’ve kept several important attributes of the
HMD904’s predecessor and made it better because:
• It has a new, more powerful motor so you can drill
large holes without stalling deep in the cut
• The cost of motor wear replacement parts has been
lowered by 1/3 over the old style motor
• The new magnetic design increases the drill point
breakaway to 820 lb
• New ergonomic handles improve operator efficiency
The HMD904 can be converted into a portable machine
shop with Hougen’s variety of accessories and uses
Rotabroach "12,000-Series" Cutters. The HMD908 is the
230V version.
Model No. 904
Electrical Rating 120V
60 Hz
7.2 Amp
230V
60 Hz
4.0 Amp
No Load RPM 450 450
Hole
Capacity
Dia. 7/16 - 1-1/2
Depth 2
Arbor Bore 3/4
Dimensions Height 16-7/16
Width 7-3/16
Length 8-1/4
Base Size 3-1/8 x 6-9/16
Net Weight (approx) 27.5 lb
Shipping Weight 38.1 lb
HMD505
The two-speed Model HMD505 with quill feed design
eliminates gib adjustments and arbor support brackets/
spacers for maintenance free operation and fast, smooth
feed into and throughout the cut especially in deep hole
drilling. Optional pressurized coolant system aids drilling
in horizontal positions and feed handles can be switched
to either side without tools. Rear positioned controls
for accessibility and convenience. Coolant bottle and
carrying handle removes leaving drill only 15" high. Uses
Rotabroach "12,000-Series" Cutters. The HMD501 is the
230V version.
Model No. 505
Electrical Rating 120V
60 Hz
14 Amp
230V
60 Hz
7.0 Amp
No Load RPM 250 450
Hole
Capacity
Dia. 7/16 - 2-3/8
Depth 3
Arbor Bore 3/4
Dimensions Height 20
Width 4-3/4
Length 10-3/4
Base Size 4 x 8
Net Weight (approx) 45.05 lb
Slick-Stik™ is softer than other stick lubricants for easy application, superior
adhesion to the tool, assuring thorough coverage. Use with ferrous or non-ferrous
materials. RotaMagic™ Concentrated Cutting Fluid is water soluble and yields a
10:1 ratio when mixed with water. (Biodegradable)
Slick-Stick™ Lubricant & Rotomagic™ Cutting Fluid Part No. Description
11741-12 (12) 1 Pint Bottles - makes 1 pint
each, 12 pints total
11742-4 (4) 1 Gallon Bottles - makes 11
gallons each, 44 gallons total
11743 (1) 5 Gallon Pail - makes 55
gallons total
11745-6 (6) 16 oz. Slick-Stik™ Lubricant
11746-12 (12) 1.68 oz. Slick-Stik™ Lubricant
11746-24 (24) 1.68 oz. Slick-Stik™ Lubricant
333
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MAGNETIC BASE PORTABLE DRILLS
Take the effort out of holemaking
with the power feed HMD925.
With exceptional performance
and reliability, it uses Rota-
broach® Annular Cutters to
produce holes from 7/16" to
1-1/4" diameter thru materi-
als up to 2" thick in power feed
mode. The HMD925 is compact
and lightweight at only 37 lbs.
The HMD925 incorporates smart
technology that monitors and
adjusts the self-feed action to
continuously maintain optimum
drilling performance throughout
the cut, providing consistent
productivity, long tool life and
excellent hole quality. HMD928
is 230V model.
The HMD914 is the long standing
powerful and versatile workhorse
that offers a built in 16 oz. gravity
feed coolant bottle. This model pow-
ers through holes up to 2-1/16" di-
ameter and 3" deep without bogging
down. Making the drill even better
is the many accessories available.
Hougen® safety features include the
lift detector, and the no adjustment
safety switch. LED indicator is built
in to the control panel. Equipped
with positive slug ejection. HMD909
is 230V model.
New Improved
Control Panel! HMD914K Fabricator's Kit
Includes HMD914 w/ Carrying Case, Jacobs®
Chuck, Adapter, & 12002 Rotabroach® Cutter Kit
Variety of
Accessories Available
HMD925 POWER FEED HMD914
HMD925 Specifications
Electrical System 120V, 50/60 Hz
8A, 960W
Motor 7.2A, 450 RPM
Manual
Capacity
Dia.
Depth
7/16" - 1-1/4" (12mm - 32mm)
2" (50mm)
Power
Feed
Capacity
Dia.
Depth
7/16" - 1-1/4" (12mm - 32mm)
2" (50mm)
Cutter / Mount Rotabroach "12,000" Series
3/4" Shank
Dimensions 17-1/8" H X 10-13/16" W x 11-3/16" L
Magnet Base 3-1/8" W x 6-9/16" L
Strength
1" Plate
Dead Lift
1680 lb
Drillpoint Break-
away 900 lb
3/8"
Plate
1124 lb 741 lb
Net Weight 37 lb
Shipping Weight Approx 47 lb
HMD914 Specifications
Electrical System 120V, 50/60 Hz
11.2A, 1344W
Motor 10.5A, 350 RPM
Hole
Capacity
Dia.
Depth
7/16" - 2-1/16" (12mm - 52mm)
3" (76mm)
Cutter / Mount Rotabroach "12,000" Series
3/4" Shank
Dimensions 20-1/2" H X 8-3/16" W x 13-3/4" L
Magnet Base 3-1/2" W x 7" L
Strength
1" Plate
Dead Lift
2500 lb
Drillpoint Break-
away 1065 lb
3/8"
Plate
1400 lb 880 lb
Net Weight 44 lb
Shipping Weight 53.3 lb
Variety of
Accessories
Available
334 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ROTABROACH® CUTTERS
"12,000-Series" Cutter Kit
"12,000-Series" Cutter Kits keep five of the
most popular cutters protected and handy
Part No. Description
12001 Rotabroach "12,000-Series" Kit for
1" D.O.C. - contains (2) pilots, (2)
wrenches and five cutters (9/16",
11/16", 13/16", 15/16" and 1-1/6") in
plastic case.
12002 Rotabroach "12,000-Series" Kit for
2" D.O.C. - contains (2) pilots,
(2) wrenches and five cutters
(9/16", 11/16", 13/16", 15/16" and
1-1/6") in plastic case.
Part No. For use
Material Thickness with Cutter
1" 2" 3" Diameters
10531 10532 — 7/16" and 12 mm
10533 10534 — 1/2" - 11/16" and
13 - 18 mm
10527 10528 3-10528 3/4" - 2-1/16" and
19 - 51 mm
— 40588 — Rail Drill only
Tool
Series: RotaCut™Extended
Reach Holcutter™Carbide
Holcutter™RotaLoc™RotaLoc
Plus™
Rota-
broach®
Copper-
head™42/43,000
Diameter
Range
Min. / Max.
1/4" to
1-1/2"
3/8" to
9/16"
11/16"
to 3" 11/16" to 3"
1/2" to
1-1/16"
w/ stack
geometry
1/2" to
1-3/8"
7/16" to
2-3/8"
9/16" to
1-1/2"
3/4" to
3-1/16"
Max. Depth
of Cut 1/4" to 1/2" 1/4" 1/8" 1/8" 3/4" 1" 1", 2", or 3" 2" 2" or 3"
Mounting
3/8" or 1/2"
Triple Flat
Shank
3/8"
Triple Flat
Shank
3/8"
Triple Flat
Shank
3/8" or 1/2"
Triple Flat
Shank
Bayonet
Style
Bayonet
Style
3/4"
Double
Flat Shank
3/4"
Double
Flat Shank
3/4" Weldon
or
1-1/4" Weldon
Hougen Cutter Comparison Chart
Cutters
Note: Cutters are also available in Metric
Sizes - Call for Sizes
"12,000 Series" Cutters
Part No. / Depth of Cut
Cutter Dia. Decimal Equiv. 1 " 2" 3"
3/4” Diameter Shank Cutters - Use with Pilot 10531 or 10532
7/16" .4375 12114 12214 —
3/4” Diameter Shank Cutters - Use with Pilot 10533 or 10534
1/2" .5000 12116 12216 —
9/16" .5625 12118 12218 —
5/8" .6250 12120 12220 —
11/16" .6875 12122 12222 —
3/4” Diameter Shank Cutters - Use with Pilot 10527,10528 or 3-10528
3/4" .7500 12124 12224 3-12224
13/16" .8125 12126 12226 3-12226
7/8" .8750 12128 12228 3-12228
15/16" .9375 12130 12230 3-12230
1" 1.0000 12132 12232 3-12232
1-1/16" 1.0625 12134 12234 3-12234
1-1/8" 1.1250 12136 12236 3-12236
1-3/16" 1.1875 12138 12238 3-12238
1-1/4" 1.2500 12140 12240 3-12240
1-5/16" 1.3125 12142 12242 3-12242
1-3/8" 1.3750 12144 12244 3-12244
1-7/16" 1.4375 12146 12246 3-12246
1-1/2" 1.5000 12148 12248 3-12248
1-9/16" 1.5625 12150 12250 3-12250
1-5/8" 1.6250 12152 12252 3-12252
1-11/16" 1.6875 12154 12254 3-12254
1-3/4" 1.7500 12156 12256 3-12256
1-13/16" 1.8125 12158 12258 3-12258
1-7/8" 1.8750 12160 12260 3-12260
1-15/16" 1.9375 12162 12262 3-12262
2" 2.0000 12164 12264 3-12264
2-1/16" 1.0625 — 12266 —
335
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DIAMOND CORE DRILL RIGS / CORE BITS
Heavy Duty
Orange
Premium Black
The Premium Black bit is the industry
standard. Its very high diamond
concentration gives maximum footage
and drilling speed. Designed for all types
of wet drilling. Good in moderate to high
steel applications. Choose Premium Black
for your lowest total drilling cost.
Specifications:
P33F - Hard aggregate
POL - General purpose, fast cutting
P64L - Asphalt/Block, long life
Impregnated
Yellow
Popular general purpose bit because
of its continuous crown design which
works well in applications with pre-
stressed cable, loose rebar and loose
wire mesh.
Our most popular bit. High diamond
concentration for excellent footage and
cutting speed. For all types of wet drilling
in applications with light to moderate
steel, Go with Heavy Duty Orange for the
best general purpose bit on the market
Specifications:
H33F - Hard Aggregate
HOL - General Purpose, Fast Cutting
H64L - Asphalt/Block, long life
M-2 Drill Rig
New Lighter
Base & Carriage
• Dual switch/outlet control
panel and amp meter
• 4 spoke handle, 6" wheels
• 2-1/2" square column
• 10" bit capacity, 14" with 1 spacer
• Accepts bits 22" overall
• 20 amp Milwaukee motor
• 600/1200 RPM
• Slip clutch safety overide
M-2 Complete Combination Rig
"The #1 Drill Rig in America"
M-4 Drill Rig M-4
Complete
Combination
Rig
Ultra-light rig
weighs only 20 lbs.
Motor weighs only
15 lbs.
• Complete rigs include:
Combo anchor/vacuum/
angle base, mast, carriage,
vacuum, pump motor
mount plate and your
choice of motor.
• 6" bit capacity
(3" handheld)
• 600/1200 RPM
• Slip clutch safety override
3 Speed, Very Powerful
• Resuable / Portable
• Prevents accidents and injuries
• Prevents OSHA citations
• No sawing, predrilling or bolting
into concrete necessary
• Safety orange color
• Assembly hardware included
• Assembles and removes in
seconds
Paragon Products
Hole In One Cover
Stock Sizes (Inches)
1/2 3 14
5/8 3-1/4 16
3/4 3-1/2 18
7/8 4 20
1 4-1/4 24
1-1/8 4-1/2 26
1-1/4 5 28
1-3/8 5-1/2 30
1-1/2 6 32
1-5/8 6-1/4 34
1-3/4 6-1/2 36
1-7/8 7 38
2 8 40
2-1/4 9 42
2-1/2 10 44
2-3/4 12 46
48
Stock Sizes (Inches)
1 2-3/4 6-1/2
1-1/8 3 7
1-1/4 3-1/4 8
1-3/8 3-1/2 9
1-1/2 4 10
1-5/8 4-1/4 12
1-3/4 4-1/2 14
1-7/8 5 16
2 5-1/2 18
2-1/4 6 20
2-1/2 6-1/4 24
Stock Sizes (Inches)
1 2-1/4 5
1-1/8 2-1/2 5-1/2
1-1/4 2-3/4 6
1-3/8 3 6-1/4
1-1/2 3-1/4 6-1/2
1-5/8 3-1/2 7
1-3/4 4 8
1-7/8 4-1/4 9
2 4-1/2 10
336 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DIAMOND CORING RIGS & MOTORS
Diamond Drilling Rigs
Sugg. Dia. Net Ship
Part in Medium Wt. Wt.
No. Amp * Spindle rpm Aggregate (in) (lb) (lb)
4079 20 1-1/4 - 7 300 7 - 14 24 31
600 4 - 7
4004 20 1-1/4 - 7 300 7 - 14 24 31
600 4 - 7
4094 20 1-1/4 - 7 450 6 - 10 24 31
900 2 - 6
4096 20 1-1/4 - 7 450 6 -10 24 31
900 2 - 6
4005 20 1-1/4 - 7 600 4 - 7 24 31
1200 3/4 - 4
*Cord equipped with 20 amp Twist Lock Plug; NEMA plug
type L5-20P
Sugg. Dia. Net Ship
Part in Medium Wt. Wt.
No. Amp* Spindle rpm Aggregate (in) (lb) (lb)
4090 15 1-1/4 - 7 375 5 - 8 26 30
750 2-1/2 - 5
4092-20 15 1-1/4 - 7 375 5 - 8 26 30
750 2-1/2 - 5
4097-20 15 1-1/4 - 7 500 3 - 5 26 30
1000 1-1/4 - 3
*Cord equipped with 20 amp Twist Lock Plug; NEMA plug
type L5-20P
Part No. Column Ht. Net Wt. (lb) Ship Wt. (lb)
4136 47 106 129
4130 47 82.5 103.5
4115
Small Base Stand only
4120
Large Base Coring Stand with
Vacuum Base
4120-22
Contractor Plus Series
Large Base Stand (4120) with Vac-U-Pump
Assembly (49-50-0200), Meter Box
(48-51-0120) and Model 4096 Diamond
Coring Motor
4115-22
Contractor Plus Series
Small Base Stand (4115) with Vac-U-Pump Assembly
(49-50-0200), Vacuum Pad Assembly (49-50-7100), Meter
Box (48-51-0120) and Model 4096 Diamond Coring Motor
Shear Pin Models - 4090 / 4079 /
4094 - 120V AC
Clutch Models - 4092-20 /
4097-20 / 4004 / 4096 / 4005 -
120V AC
Two speed Dymodrill Motors for use with Vac-U-Rig®
and Dymorig Diamond Core Rigs
• Triple reduction gearing on all models
• Built-in water swivel on all models
• All ball and roller bearings
Shear Pin Protection
Protects gears and motor against overload. Shear pins easily
replaced. Extra pins included with each unit.
Clutch Protection
Protects gears and motor against overload. Set to specifications
at factory, no adjustment necessary.
15 Amp Models
20 Amp Models
A big word about our service - DEPENDABLE
Diamond Coring Motors
Contractor Series Base Stands
for Drilling Rigs
4136
Vac-u-Rig® Diamond Coring Rig
Less Dymodrill Motor and
Dymobit (Diamond Bit)
4130
Dymo-Rig Diamond Drilling
Rig - Large Base-Stand Only
For diamond coring in reinforced
concrete, tile, masonry or natural stone.
For use with dymo drill motors.
Exclusive 4136 Features
• Includes large base with wheels and
four leveling screws, adjustable tilting
column, cradle for motor mounting, four
spoke wheel feed control, bubble level
and jack screw
• Base can be floor or wall mounted - use
a bolt type anchor
• Column will accept small base assembly
No. 48-10-0080
4130 Features
• The large base can be floor or wall mounted with a bolt type
anchor or braced from the ceiling with a telescoping assembly
No. 48-95-1000 by using the jack screw
• Base can be replaced with a No. 48-10-0080 small base - or
used with Vac-U-Rig attachment kit No. 49-22-7075 to convert
the 4130 into 4136 Vac-U-Rig
• Order meter box separately
337
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DIAMOND CORING ACCESSORIES
Water Collecting Ring
48-70-0060
For use where water flow from drilling
operation must be trapped and
drained. Dike-type collector ring holds
water for fast disposal when used with
bits up to 10” in diameter. A built-in
vacuum hose fitting permits use with a
wet or dry vacuum cleaner.
Vacuum Pump
Assembly
49-50-0200
115 Volt
Heavy -duty 1/3 H.P. pump complete
with vacuum gauge, air filter, air hose
and cord. May be mounted to base
of unit if desired. Same as furnished
with No. 4115-22 and 4120-22. Can
be used with No. 4120 and 4136.
Recommended only for single pad
use.
Meter Boxes
48-51-0100*
30 Amp 120 Volt
Supplied with No. 4136. Ammeter and power
switch on front panel receptacle for motor’s plug.
One outlet also located on back of unit.
48-51-0120
20 Amp 120 Volt
Supplied with No. 4115-22, and 4120-22. Also
available as an accessory. Ammeter and power
switch on front panel with single 20 amp twist
lock receptacle for drill motor’s plug.
*Not available in Canada
Part No. Net Weight Shipping Weight
48-51-0100 4.8 lb 6 lb
48-51-0120 3.8 lb 5.3 lb
Large Base Assembly
48-10-0090
Large base is included with
No. 4130 and 4136. Can be
used with No. 4125 for greater
support. Includes two wheels and
four leveling screws.
Part No. Base Dimensions Net Weight Ship. Weight
48-10-0090 13-1/4” x 17-1/8” 33.5 lb 37.5 lb
(less wheels)
Small Base Assembly
48-10-0080
Small base is included with
No. 4125 and can be used with
No. 4130 and 4136. Works well
in restricted areas. Includes two
wheels and four leveling screws.
Part No. Base Dimensions Net Weight Ship. Weight
48-10-0080 7-1/4” x 13” 22 lb 26 lb
(less wheels)
Part No. Net Weight Shipping Weight
49-50-0200 19.5 lb 26.5 lb
Vacuum Pad Assembly (Single Pad)
49-22-7100
For use with models with detachable
vacuum pads 4115, 41125, 4130 and
4136. Single vacuum pad which provides
approximately 1800 lb of holding force.
Same as supplied with
No. 4136 Vac-U-Rig®, 4115-22 and
4120-22.
Part No. Net Weight Shipping Weight
49-22-7100 8.8 lb 13 lb
Water Tank
49-76-0055
3-1/2 gallon heavy-duty, impact resistant poly
tank. For use where a regular tap water supply is
not available.
Part No. Shipping Weight
49-76-0055 4 lb
Part No. Shipping Weight
48-70-0060 8.8 lb
Water Collecting Gasket
48-70-0660
Water Hose
48-18-0055
8 foot water hose with standard brass male and female water
hose fittings.
Part No. Description Shipping Weight
48-18-0055 5/8” I.D. x 8’ 1.8 lb
Part No. Description
48-70-0660 Replacement gasket for 48-70-0060
338 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HAND-HELD / DRY DIAMOND CORING EQUIPMENT
CB500-HH
CB500-HH Hand-Held Core Drill
Low-Cost Hand-Held Drilling
The heavy-duty core drill at a light-duty price. Perfect for drilling
small diameter holes.
• Up to 3" drilling capacity (hand-held or with rig stand).
• Works with Diamond Products M4 stand (See page 335).
• 1300 Watt, 115V electric motor.
• Two-speed gear box (1100 rpm and 2200 rpm).
• Includes: water hose connection for wet drilling, shoulder brace
for increased stability, 5/8-11 threaded spindle, 5/8-11 to 1.250-7
adapter, side handle, crescent wrench and carrying case..
Part No. Description
CB500-HH Hand-Held Core Drill
WEKA DK13 Hand
Held Core Drill
(110 Volt)
Drill wet or dry thanks to a special
sealing system that allows the
combination of water cooling or
dust removal. Make the switch with
a simple change of the vacuum or
water adapter.
• Lightweight (15 lbs.) hand held or drill stand mountable
• 6” bit capacity (3” hand held, ideal for thin wall bits).
• Convenient carrying case.
• 2 bubble levels for straight drilling.
• 3-speed (580/1400/2900 loaded rpm) 110V, 14 amp electric
motor with slip clutch and over load switch.
• Soft start improves ease of operation and reduces circuit
breaker trips at start-up.
Part No. Description
WEKA DK13 Hand-Held Core Drill
Dry Diamond Vacuum Bits
Designed for drilling dry in cured concrete (without
rebar), brick, and block. Run on standard core drill
motors or high speed grinders. This bit takes up
where the Dry Hole Saw leaves off.
• Do not use in applications with steel heavier than
wire mesh.
• Use with DVH Cured Concrete, Brick
• All bits have 1.250"-12 threads.
• All bits have 9" drilling depth.
Dry Vacuum Swivel Must Be Used With This Bit
5/8"-11 to 1.250-12 Vacuum Swivel Assembly
Part # - 4400125
Swivel Extension
Part # - 4400126
Diameter Part No. Min/Max RPM
1-1/2" 04775 1600/5000
1-3/4 04777 1600/5000
2" 04780 1600/5000
2-1/4" 04782 1600/5000
2-1/2" 04785 1600/5000
3" 04789 800/5000
3-1/2" 04793 800/5000
4" 04796 700/5000
4-1/2" 04799 700/5000
5" 04802 700/2500
6" 04805 700/2500
Heavy Duty Dry
Diamond Hole
Saws
Drill dry through block and soft brick in seconds. No
water needed on the job making drilling and cleanup
easier.
• Not appropriate for all types of brick and block
- Please consult factory. Not suitable for hard
concrete or materials.
• All bits have 5/8" - 11 threads, 9" drilling depth
• Jacobs Chuck Adapt available for hammer drills:
5/8” - 11 thread to straight shank.
Diameter Part No. Min/Max RPM
1" 04706 2300/6000
1-1/4" 04711 2300/6000
1-1/2" 04717 1600/5000
1-3/4 04720 1600/5000
2" 00011 1200/5000
2-1/4" 04727 1200/5000
2-1/2" 00012 1200/5000
3" 00013 800/5000
3-1/2" 00014 800/5000
4" 04745 700/5000
4-1/2" 04751 700/5000
5" 04756 700/2500
6" 04764 600/2500
339
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED DIE GRINDERS
4.5 Amp Die Grinder
• 4.5 amp, 21,000 rpm.
• For mounted wheels and points up to
1-5/8 in., reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench.
Specifications
Volts: 120 V AC
Amps: 4.5 Amps
No-Load Speed: 21,000 rpm
Switch: Toggle
Collet Dia.: 1/4"
Spindle Lock: Yes
Weight: 4.5 lbs.
Part No. Description
5192 4.5 Amp Die Grinder
4.5 Amp Die Grinder
• 4.5 amp, 21,000 rpm.
• For mounted wheels and points up to
1-5/8 in., reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench.
Specifications
Volts: 120 V AC
Amps: 4.5 Amps
No-Load Speed: 21,000 rpm
Switch: Paddle
Collet Dia.: 1/4"
Spindle Lock: Yes
Weight: 4.5 lbs.
Part No. Description
5194 4.8 Amp Die Grinder
11 Amp Die Grinder
• 11 amp, 14,500 rpm.
• For mounted wheels and points up to 2 in.,
reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in.
collet available.
• All ball and roller bearings.
• Includes: Die Grinder Collet 1/4 in., 11/16
in. Open End Wrench, 1/2 in. Open End
Wrench, 1 in Open End Wrench.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
No-Load Speed: 14,500 rpm
Switch: Trigger
Collet Dia.: 1/4"
Spindle Lock: Yes
Weight: 7.8 lbs.
Part No. Description
5196 11 Amp Die Grinder
Heavy Duty, 5 Amp
2" Die Grinder
• AC/DC capacity works off welding ma-
chines and generators.
• External brush caps for easy servicing.
• Convenient paddle switch with lock-on
button for easy gripping.
• Precision 1/4" collet with 1/8" reducing
sleeve securely holds all proper accessories.
• Includes: 2 wrenches, 1/4" collet, 1/8"
reducing sleeve.
Specifications
Volts: 120 V AC
Amps: 5.0 Amps
Max Watts Out: 485 W
No-Load Speed: 29,000 rpm
Switch: Trigger
Spindle Thread: 1/4" collet/1/8" sleeve
Weight: 6.0 lbs.
Part No. Description
DW888 3 Amp, 1-1/2" Die Grinder
DW888
Heavy Duty, 3 Amp
1-1/2" Die Grinder
• AC/DC capacity works off welding ma-
chines and generators.
• Convenient paddle switch with lock-on
button for easy gripping.
• Precision 1/4" collet with 1/8" reducing
sleeve securely holds all proper accessories.
• Includes: 2 wrenches, 1/4" collet, 1/8"
reducing sleeve.
Specifications
Volts: 120 V AC
Amps: 3.0 Amps
Max Watts Out: 350 W
No-Load Speed: 25,000 rpm
Switch: Trigger
Spindle Thread: 1/4" collet/1/8" sleeve
Weight: 3.25 lbs.
Part No. Description
DW887 3 Amp, 1-1/2" Die Grinder
DW887
519651945192
Tungsten Carbide Burs
Features
• Tungsten carbide construction
• Highest quality manufacturing methods
• Precision ground with diamond wheels
• Each enclosed in individual plastic
capsule
Benefits
• Long life and durability
• Delivers vibration-free operation
• Produces very sharp uniform cutting
edges
• Permanent storage to prevent damage
SF SG SL SM
SA SC SD SE
340 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED SMALL ANGLE GRINDERS
5.5 Amp Bandfile
• 5.5 amp, 2,300 SFPM, AC only.
• 1/2 inch x 18 inch Contact Arm.
• 180° adjustable head.
• 3 position side handle.
• Includes Side handle & 1/2" arm, Belt:
1/2 x 18 Aluminum Oxide 240 Grit (10
per pack).
Specifications
Volts: 120 V AC
Amps: 5.5 Amps
Capacity: 1/2" x 18"
No-Load Speed: 2,300 fpm
Switch: Paddle
Spindle Thread: 5/8"-11
Spindle Lock: No
Weight: 6.0 lbs.
Part No. Description
6101-6 5.5 Amp Bandfile
BOSCH
8 Amp 4-1/2" Small Angle Grinder
• 1.1 horsepower maximum motor.
• Lock-on/off paddle switch.
• Vibration Control Handle.
• Sealed switch.
• Service Minder™ brushes.
• Tool-free adjustable guard.
• Directed Air Flow.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench, abrasive wheel.
Specifications
Volts: 120 V AC
Amps: 8.0 Amps
No-Load Speed: 11,000 rpm
Switch: Paddle
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.3 lbs.
Part No. Description
1810PS 4-1/2" Small Angle Grinder
1810PS
7 Amp 4-1/2" Small Angle Grinder
• Quick-change wheel release.
• Low profile jam-pot gear case.
• Oversized, protected spindle lock button.
• 2-position removable side handle.
• 5/8"-11 spindle thread.
• Includes: 2-position side handle, de-
pressed center wheel, keyless adjustable
guard, wrench.
Specifications
Volts: 120 V AC
Amps: 7.0 Amps
Max Watts Out: 800 W
No-Load Speed: 11,000 rpm
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.1 lbs.
Part No. Description
D28110 4-1/2" Small Angle Grinder
D28110
6101-6
7 Amp 4-1/2" Small Angle Grinder
• Stronger, 7.0 Amp, 775 MWO motor
• 25% longer lasting epoxy protection -
extends motor life by protecting the
copper wire from abrasion
• Debris Baffles
• Multi-Port Exhaust
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 7.0 Amps
Max Watts Out: 775 MWO
No-Load Speed: 10,000 rpm
Switch: Slide w/Lock-on
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 5.0 lbs.
Part No. Description
6140-33 4-1/2" Grinder, Slide Switch
6140-33
7.5 Amp 4-1/2" Small Angle Grinder
• Stronger, 7.5 Amp, 825 MWO motor
• X-Large Paddle Switch
• 25% Longer Lasting Epoxy Protection -
extends motor life by protecting the
copper wire from abrasion
• Debris Baffles
• Multi-Port Exhaust
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 7.5 Amps
Max Watts Out: 825 MWO
No-Load Speed: 10,000 rpm
Switch: Paddle w/Lock-on
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 5.0 lbs.
Part No. Description
6140-30 4-1/2" Grinder, Paddle Switch
6140-30
BOSCH
6 Amp 4-1/2" Small Angle Grinder
• 1 horsepower maximum motor.
• Lock-on/off switch.
• Service Minder™ brushes.
• Precision spiral bevel gears.
• 2-Position auxiliary handle.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench
Specifications
Volts: 120 V AC
Amps: 6.0 Amps
No-Load Speed: 11,000 rpm
Switch: Trigger
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.6 lbs.
Part No. Description
1347A 4-1/2" Small Angle Grinder
1347A
341
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED SMALL ANGLE GRINDERS
10 Amp 4-1/2" Small Angle Grinder
• Stronger 10.0 Amp, 1250 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6148-31)
• Debris Baffles
• Multi-Port Exhaust
• 25% Longer Lasting Epoxy Protection-
extends motor life by protecting the
copper wire from abrasion
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges, con-
tractor's bag.
Specifications
Volts: 120 V AC
Amps: 10 Amps
Max Watts Out: 1250 MWO
No-Load Speed: 10,000 rpm
Switch: Paddle w/Lock-on
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 5.5 lbs.
Part No. Description
6148-30 4-1/2" Grinder, Paddle Switch
6148-30
10 Amp 4-1/2" Small Angle Grinder
• Stronger 10.0 Amp, 1250 MWO Motor
• Slide switch with Lock-on
• Debris Baffles
• Multi-Port Exhaust
• 25% Longer Lasting Epoxy Protection-
extends motor life by protecting the
copper wire from abrasion
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 10 Amps
Max Watts Out: 1250 MWO
No-Load Speed: 10,000 rpm
Switch: Slide w/Lock-on
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 5.5 lbs.
Part No. Description
6148-33 4-1/2" Grinder, Paddle Switch
6148-33
10 Amp 4-1/2" Small Angle Grinder
• Dust Ejection System™.
• Quick-change wheel release
• Keyless adjustable guard.
• Vibration reducing removable side handle.
• Oversized, protected spindle lock button.
• Slide switch lock-off .
• Includes: 2-position side handle, keyless,
adjustable guard, wrench
Specifications
Volts: 120 V AC
Amps: 7.0 Amps
Max Watts Out: 800 W
No-Load Speed: 11,000 rpm
Switch: Slide w/ Lock-off
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.1lbs.
Part No. Description
D28112 4-1/2" Small Angle Grinder
D28112
10 Amp 4-1/2" Small Angle Grinder
• Dust Ejection System™.
• Quick-change wheel release
• Keyless adjustable guard.
• Vibration reducing removable side handle.
• Paddle switch lock-off .
• Includes: 2-position side handle, keyless,
adjustable guard, wrench
Specifications
Volts: 120 V AC
Amps: 10.0 Amps
Max Watts Out: 1,200 W
No-Load Speed: 11,000 rpm
Use Wheels >RPM: 12,000 rpm
Switch: Paddle w/ Lock-off
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.6 lbs.
Part No. Description
D28402 4-1/2" Small Angle Grinder
D28402
10 Amp 4-1/2" Small Angle Grinder
• Stronger 10.0 Amp, 1250 MWO Motor
• 3-Position Trigger Grip Handle with Soft
Grip for optimum control, with or with-
out lock-on.
• Debris Baffles
• External Brush Doors - reduces service time
• Tool Free, Burst Resistant Guard- quickly
adjust the guard without a tool
• Includes side handle, 4-1/2" wheel, Type
27 guard, spanner wrench, flanges
Specifications
Volts: 120 V AC
Amps: 10 Amps
Max Watts Out: 1250 MWO
No-Load Speed: 10,000 rpm
Switch: Trigger
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 7.4 lbs.
Part No. Description
6122-30 4-1/2" Grinder, Trigger Switch
w/ Lock-on
6122-31 4-1/2" Grinder, Trigger Switch
w/o Lock-on
6122-30
Type 27 Depressed Center
.045 Cutting Wheels
• Unique thin Type 27 shape can be used
on all right angle grinders.
• Aluminum Oxide offers the fastest cut-
ting, longest lasting thin wheels.
• SAI22011 rated to 19,000 max rpm
SAI22021 rated to 13,300 max rpm
• Externally reinforced with fiberglass layers
to provide ultimate safety in a thin wheel.
• Packaged 50/box.
• Use for ferrous and/or non-ferrous met-
als.
(Sold in full box quantities only)
Part No. Description
SAI22011 4"x .045" x 5/8"
SAI22021 4½"x .045" x 7/8"
342 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED SMALL ANGLE GRINDERS
12 Amp 4-1/2"/5" Small Angle
Grinder - w/ Paddle Switch
• Stronger 12.0 Amp, 1490 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6116-31)
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 4-1/2" & 5" Type 27 Guard Included
• Includes side handle, 4-1/2" and 5" Type
27 guards, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 10 Amps
Max Watts Out: 1250 MWO
No-Load Speed: 10,000 rpm
Switch: Paddle
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 5.7 lbs.
Part No. Description
6116-30 4-1/2" Grinder, Paddle Switch
w/ Lock-On
6116-31 4-1/2" Grinder, Paddle Switch
w/o Lock-On
6116-30
12 Amp 4-1/2/5" Small Angle
Grinder - w/ Slide Switch
• Same specifications as 6116-30 (see
above)
• Features slide switch
Part No. Description
6116-33 4-1/2 / 5" Grinder, Slide
Switch
6116-33
12 Amp 5" Medium Angle
Grinder
• High power-to-weight ratio.
• Keyless adjustable guard.
• Rear handle design.
• External brush doors for easy servicing.
• Sealed ball and roller bearings for ex-
tended motor life.
• Includes: grinding wheel, wrench, back-
ing flange, clamp nut, keyless adjustable
guard, 2 position side handle.
Specifications
Volts: 120 V AC
Amps: 12.0 Amps
Max Watts Out: 1,837 W
No-Load Speed: 10,000 rpm
Use Wheels >RPM: 11,000 rpm
Switch: Trigger
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 7.4 lbs.
Part No. Description
DW831 5" Medium Angle Grinder
DW831
12 Amp 5/6" Small Angle Grinder
w/ Trigger Grip
• Stronger 12.0 Amp, 1490 MWO Motor
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 5" and 6" Type 27 Guards included
• Includes side handle, 5" and 6" Type 27
guards, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 12 Amps
Max Watts Out: 1490 MWO
No-Load Speed: 9,000 rpm
Switch: Trigger Grip
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 6.5 lbs.
Part No. Description
6123-30 6" Cut-Off Grinder, Trigger
Grip w/ Lock-On
6123-31 6" Cut-Off Grinder, Trigger
Grip w/o Lock-On
6123-30
BOSCH
9 Amp 5" Small Angle Grinder
• 1.1 horsepower maximum motor.
• Vibration Control Handle.
• AC/DC capability.
• Sealed switch.
• Service Minder™ brushes.
• Epoxy Coated Field Windings.
• Tool-free adjustable guard.
• Directed Air Flow.
• Includes: Guard, auxilary handle,flange
kit, spanner wrench, abrasive wheel.
Specifications
Volts: 120 V AC
Amps: 9.0 Amps
No-Load Speed: 11,000 rpm
Switch: Paddle
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 4.8 lbs.
Part No. Description
1811PSD 5" Small Angle Grinder
1181PSD
Type 27 Depressed Center
.045 Grinding Wheels
• Aluminum Oxide grain.
• A24N for fast stock removal on Ferrous
Metals and Low Grade Stainless Steel.
• A24R for general purpose grinding and
long life on Ferrous Metals.
• 4½" wheels are rated to 13,300 max rpm;
7" wheels are rated to 8,500 max rpm.
(Sold in full box quantities only)
Part Box
No. Dia. Width Bore Grade Qty
SAI20060 4½" ¼" 7/8 A24N 25
SAI20063 4½" ¼" 7/8 A24R 25
SAI20160 4½" ¼" 5⁄8-11 A24N 10
SAI20163 4½" ¼" 5⁄8-11 A24R 10
SAI20085 7" ¼" 5⁄8-11 A24N 10
SAI20086 7" ¼" 5⁄8-11 A24R 10
343
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED LARGE ANGLE GRINDERS
12 Amp 6"" Cut-Off Angle Grinder
w/ Paddle Switch
• Stronger 12.0 Amp, 1490 MWO Motor
• X-Large paddle switch with Lock-on.
(Available without Lock-on: P/N 6160-31)
• Advanced Electronics - includes ESO:
Electronic Shut-Off, CPT: Constant Power
technology, OLP: Overload Limit Protection
• ESO: Electronic Shut-Off -shuts down the
grinder when the wheel is stalled in a pinch
• Debris Baffles
• Multi-Port Exhaust
• Soft Grip 3-Position Handle
• Tool Free, Burst Resistant Guard
• 6" Type 1 & 27 Guard Included
• Includes side handle, Type 1 and Type
27 guard, spanner wrench, flanges.
Specifications
Volts: 120 V AC
Amps: 12 Amps
Max Watts Out: 1490 MWO
No-Load Speed: 9,000 rpm
Switch: Paddle
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 6.3 lbs.
Part No. Description
6160-30 6" Cut-Off Grinder, Paddle
Switch w/ Lock-On
6160-31 6" Cut-Off Grinder, Paddle
Switch w/o Lock-On
6160-30
12 Amp 6" Cut Off Angle Grinder
- w/ Slide Switch
• Same specifications as 6160-30 (see
above)
• Features slide switch
Part No. Description
6160-33 6" Cut-Off Grinder, Slide
Switch
6160-33
Heavy Duty, 13 Amp
7" Medium Angle Grinder
• High power-to-weight ratio.
• Keyless adjustable guard.
• Rear handle design.
• External brush doors for easy servicing.
• Sealed ball and roller bearings for ex-
tended motor life.
• Includes: grinding wheel, wrench, back-
ing flange, clamp nut, keyless adjustable
guard, 2 position side handle.
Specifications
Volts: 120 V AC
Amps: 13.0 Amps
Max Watts Out: 2,250 W
No-Load Speed: 8,000 rpm
Use Wheels >RPM: 8,500 rpm
Switch: Trigger
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 8.0 lbs.
Part No. Description
DW840 7" Medium Angle Grinder
DW840
Heavy Duty, 15 Amp
7" & 9" Large Angle Grinder
• 5.3 maximum horsepower motor..
• Keyless adjustable guard.
• Rotating, rear handle design.
• Low profile gearcase allows for work in
tight areas.
• 5 position side handle.
• Includes: 7" & 9" guard, 5-position side
handle.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Max Watts Out: 3,950 W
No-Load Speed: 6,000 rpm
Use Wheels >RPM: 6,600 rpm
Switch: Trigger
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 14.5 lbs.
Part No. Description
D28499X 7" & 9" Large Angle Grinder
D28499X
15 Amp 7" / 9" Large Angle Grinder
• 15.0 Amp, 4.2 HP Motor
• Trigger Grip with Lock-on. (Available
without Lock-on: P/N 6088-31)
• Debris Baffles.
• External Brush Doors.
• Soft-Grip Main Handle.
• Tool Free, Burst Resistant Guard.
• Includes: 7" and 9" Type 27 guards, side
handle, spanner wrench, flanges
Specifications
Volts: 120 V AC
Amps: 15 Amps
No-Load Speed: 6,000 rpm
Switch: Trigger
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 13.7 lbs.
Part No. Description
6088-30 7 / 9" Grinder, Trigger Grip
w/ Lock-On
6088-31 7 / 9" Grinder, Trigger Grip
w/o Lock-On
6088-30
15 Amp 7" / 9" Roto™ Large
Angle Grinder w/Rotating Handle
• 15.0 Amp, 4.2 HP Motor
• 9-Position Rotating Handle
• Trigger Grip with Lock-on. (Available
without Lock-on: P/N 6089-31)
• Debris Baffles.
• External Brush Doors.
• Soft-Grip Main Handle.
• Tool Free, Burst Resistant Guard.
• 7" & 9" Type 27 Guard included.
• Includes: 7" & 9" Type 27 guard,side
sandle, spanner wrench, flanges
Specifications
Volts: 120 V AC
Amps: 15 Amps
No-Load Speed: 6,000 rpm
Switch: Trigger
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 13.7 lbs.
Part No. Description
6089-30 7 / 9" Grinder, Trigger Grip
w/ Lock-On
6089-31 7 / 9" Grinder, Trigger Grip
w/o Lock-On
6089-30
344 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED LARGE ANGLE GRINDERS
13 Amp 7" & 9" Sander
• 3.5 maximum horsepower motor.
• 7 inch or 9 inch capacity.
• Spiral bevel gearing for performance and
durability.
• Sander may be converted to grinder by
using the proper wheel guard.
• Includes: Side Handle, Flange, Nylon
Washer.
Specifications
Volts: 120 V AC
Amps: 13 Amps
No-Load Speed: 5,000 or 6,000 rpm
Switch: Trigger
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 12.0 lbs.
Part No. Description
6072 7"& 9" Sander, 5,000 RPM
6078 7"& 9" Sander, 6,000 RPM
6072 Heavy Duty, 15 Amp
9" Large Angle Grinder
• 4 horsepower maximum motor.
• Keyless adjustable guard.
• Low profile gearcase.
• 5 position side handle.
• Light Weight increases productivity in
extended use applications
• Includes: 9" guard, 5-position side
handle.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Max Watts Out: 3,084 W
No-Load Speed: 5,000 rpm
Use Wheels >RPM: 5,00 rpm
Switch: Trigger
Spindle Thread: 5/8"-11
Spindle Lock: Yes
Weight: 13.6 lbs.
Part No. Description
D28493N 9" Large Angle Grinder
D28493N
15 Amp 7" & 9" Sander
• 3.5 maximum horsepower motor.
• 7 inch or 9 inch capacity.
• Spiral bevel gearing for performance and
durability.
• Sander may be converted to grinder by
using the proper wheel guard.
• Includes: Side Handle, Flange, Nylon
Washer.
Specifications
Volts: 120 V AC
Amps: 15 Amps
No-Load Speed: 5,000 or 6,000 rpm
Switch: Trigger
Spindle: 5/8"-11
Spindle Lock: Yes
Weight: 12.0 lbs.
Part No. Description
6065-6 7" & 9" Sander, 5,000 RPM
6066-6 7"& 9" Sander, 6,000 RPM
6065-6
A24R
Primary application: ferrous metals
(iron, steel, welds, etc.)
• Aluminum oxide grain
• Medium bond for longer life and
fewer wheel changes
Type 28 Depressed Center Grinding Wheels
Saitech Ultimate Performance™
Primary application: stainless steel
Secondary application: ferrous metals
(iron, steel, welds, etc.)
• Combines maximum material removal
with long life
• Exclusive formula with patented 3M
Cubitron grain
C24N
Primary application: masonry, concrete, stone, brick
• Silicon carbide grain
• Soft bond for fast stock removal
Size Max. Grade
Dia. Width Bore RPM A24R C24N Saitech
7 1/4 7/8 8,500 SAI21000 SAI21002 SAI21084
7 1/4 5/8-11 8,500 SAI21005 SAI21006 SAI21089
9 1/4 7/8 6,600 SAI21010 SAI21012 SAI21094
9 1/4 5/8-11 6,600 SAI21015 SAI21016 SAI21099
A46N Aluminum (Non-
Ferrous Metals) .045
Primary application: non-ferrous
metals (aluminum,
copper, brass etc.)
• Aluminum oxide grain
• Soft bond for aggressive cutting
without loading
A60S .045
Primary application: ferrous and/
or non-ferrous metals (iron, steel,
welds, etc.)
• Special aluminum oxide grain
• Hard bond for extremely long life
• Fast, burr free cutting
Saitech Ultimate Performance™
Primary application: stainless steel and other high tensile alloys
Secondary application: ferrous metals (iron, steel, welds, etc.)
• Fast cutting with long life
• Wheel can be mounted to right angle grinders with standard
Type 27 flanges
Size Max. Grades Available
Dia. Width Bore RPM A46N A60S Saitech
5 .045 7/8 12,200 SAI22350 SAI22071 SAI22073
6 .045 7/8 10,200 SAI22360 SAI22047 SAI22082
7 .045 7/8 8,500 SAI22370 SAI22053 SAI22088
Type 28 Depressed Center Cutting Wheels
345
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED JIG SAWS & BLADES
Features:
• Bi-Metal construction
• Precision milled teeth and ground
teeth
• Matrix II or M42* high speed
steel cutting edge
• Tooth hardness Rc 66 minimum
• 0° Tang angle
• Tangs to fit all major
manufacturers of Jig Saw
Machines
Advantages:
• Shatterproof
• Shock resistant teeth
• High wear and high heat
resistance
Compact Jig Saw Kit
• Keyless blade clamp for fast, easy blade
installation and removal.
• 5.5 Amp motor deliver powerful cuts in
the hardest materials.
• Variable speed delivers 0 - 3,100 strokes
per minute for optimal cutting speed.
• 4-position orbital action allows for
faster, more aggressive cuts in a variety
of materials.
• All-metal gear case provides superior
durability on a professional site.
• Shoe bevels 0° to 45° for beveled cuts.
• Includes: 1 Blade, Heavy-duty kit box.
Specifications
Volts: 120 V AC
Amps: 5.5 Amps
Strokes per minute: 0-3,100
Stroke Length: 1"
Orbital Action: 4-position
Weight: 6.2 lbs.
Part No. Description
DW317K Compact Jig Saw Kit
DW317K
Jig Saw Blades
Universal Style Specifications
Part No. (2/Pack) L x W x Th (Inches) TPI Tooth Style Recommended Use
20620-486J 4-1/2 x 3/8 x .050 6 Milled Wood, fast cut, rough
20622-480J 4-1/2 x 3/8 x .050 6 Milled Wood, nail-embedded
20628-356JF 3-1/2 x 1-1/8 x .050 6/10 Milled Wood, flush cut
20638-340JV 3-1/2 x 3/8 x .037 10/14 Milled Wood/metal, all purpose
20610-314J 3 x 3/8 x .037 14 Milled Metal over 1/4" thick
20611-318J 3 x 3/8 x .037 18 Milled Metal over 1/8" thick, general purpose
20612-324J 3 x 3/8 x .037 24 Milled Thin metal, plastic, polys, paneling
20690-350JC 3-1/2 x 1/4 x .050 10 Milled Wood, contour/scroll
Bosch Style Specifications
Part No. (2/Pack) L x W x Th (Inches) TPI Tooth Style Recommended Use
406S 4-1/2 x 3/8 x .050 6 Milled Wood, fast cut, rough
410S 4-1/2 x 3/8 x .050 10 Milled Wood, nail-embedded
314S 3 x 3/8 x .037 14 Milled Metal over 1/4" thick
318S 3 x 3/8 x .037 18 Milled Metal over 1/8" thick, general purpose
324S 3 x 3/8 x .037 24 Milled Thin metal, plastic, polys, paneling
Benefits:
• Cuts through most materials,
including stainless steel and nail-
embedded woods
• Long life
•Retains tooth sharpness longer
• Increases productivity
• Smoother and faster cutting
346 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED RECIPROCATING SAWS
11 Amp Sawzall® Reciprocating Saw
• 11 amp Milwaukee built motor.
• 0-2800 SPM variable speed trigger.
• Quik-Lok™ blade clamp for fast, easy blade changes.
• Double bearing wobble plate mechanism for less vibration
• Center pivot adjustable shoe.
• Rubber boot for superior gripping.
• Uses standard 1/2 in. shank Sawzall® Blades - blades may be
clamped upside down for special cutting needs.
• Quik-Lok™ Blade Clamp System - fast and easy blade changes.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
Strokes per minute: 0-2,800 spm
Stroke Length: 3/4"
Orbital Action: No
Weight: 11.3 lbs.
Part No. Description
6509-31 11 Amp Sawzall® Reciprocating Saw
11 Amp Sawzall® Plus Reciprocating Saw
• 11 amp Milwaukee built motor.
• 0-2800 SPM variable speed trigger.
• Quik-Lok™ blade clamp for fast, easy blade changes.
• Gear protection system.
• Keyless adjustable shoe.
• Double bearing wobble plate mechanism.
• Rubber boot for superior gripping.
• Double insulated.
• Uses standard 1/2 in. shank Sawzall® Blades - blades may be
clamped upside down for special cutting needs.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Volts: 120 V AC
Amps: 11.0 Amps
Strokes per minute: 0-2,800 spm
Stroke Length: 1-1/8"
Orbital Action: No
Weight: 11.3 lbs.
Part No. Description
6519-31 11 Amp Sawzall® Reciprocating Saw
6519-31
10 Amp Reciprocating Saw Kit
• 4-position blade clamp allows for flush cutting and increased
versatility.
• Powerful 10.0 Amp motor designed for heavy-duty applications.
• Lever-action keyless blade clamp for quick and easy blade
changing.
• 0-2,800 strokes per minute and 1-1/8" stroke length deliver fast
cutting.
• Variable speed trigger provides improved control.
• Includes: Heavy-duty carrying case, instruction manual.
Specifications
Volts: 120 V AC
Amps: 10.0 Amps
Strokes per minute: 0-2,800 spm
Stroke Length: 1-1/8"
Keyless Blade Clamp: Lever
Shoe: Fixed
Weight: 7.0 lbs.
Part No. Description
DW304PK 10 Amp Reciprocating Saw Kit
DW304PK
15 Amp Super Sawzall® Reciprocating Saw
• 15.0 Amp Milwaukee Motor - highest overload protection in the
industry; prevents motor burn up / failure.
• Constant Power Technology™ - maintains constant speed under
load for unmatched cutting performance.
• Patented Gear Protecting Clutch - extends gear and motor life by
absorbing high impact forces caused by sudden blade lock-ups.
• Patented Counter Balanced Mechanism - smoothest running,
lowest vibrating reciprocating saw in the industry.
• Variable Speed Trigger and Dial Speed Control - maximum
speed control.
• Quik-Lok™ Blade Clamp System - fast and easy blade changes.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Strokes per minute: 0-2,800 spm
Stroke Length: 1-1/4"
Orbital Action: Yes
Weight: 14.4 lbs.
Part No. Description
6538-21 15 Amp Super Sawzall® Reciprocating Saw
6538-21
6509-31
347
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED RECIPROCATING SAWS
No. 20502-546A General Purpose
One each Reciprocating
Blades 414R, 418R, 614R,
618R, 656R. Vinyl pouch.
Reciprocating Blade Kits
No. 20433-24RKG General Purpose
Five each of Reciprocating
Blades 656R, 610R, 614R,
618R.
Two each 6514R, 6066R.
Plastic Case.
13 Amp Rotating Handle
Super Sawzall® Reciprocating Saw
• 360° Rotating Handle.
• 13 Amp Milwaukee Built Motor
• Orbital Cutting Action.
• Variable Speed Trigger, 0-3000 SPM.
• 1-1/4 in. Stroke.
• Counter Balanced/Gear Protection Systems.
• Speed Dial.
• Quik-Lok™ Blade Clamp.
• Quik-Lok® Cord.
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Volts: 120 V AC
Amps: 13 Amps
Strokes per minute: 0-3,000 spm
Stroke Length: 1-1/4"
Orbital Action: Yes
Weight: 10 lbs.
Part No. Description
6523-21 13 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
6523-21
12 Amp Orbital Sawzall® Reciprocating Saw
• 12 Amp Milwaukee Built Motor
• Orbital Cutting Action.
• Variable Speed Trigger, 0-2,800 SPM.
• 1-1/8 in. Stroke.
• Exclusive gear protecting clutch
• Quik-Lok™ Blade Clamp.
• Quik-Lok® Cord.
• Includes: Heavy-duty carrying case, (1) Sawzall® blade.
Specifications
Volts: 120 V AC
Amps: 12 Amps
Strokes per minute: 0-2,800 spm
Stroke Length: 1-1/8"
Orbital Action: Yes
Weight: 8.8 lbs.
Part No. Description
6520-21 12 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
6520-21
13 Amp Rotating Handle
Super Sawzall® Reciprocating Saw
• 13 Amp Milwaukee Built Motor.
• Orbital Cutting Action.
• Variable Speed Trigger, 0-3000 SPM.
• 1-1/4 in. Stroke.
• Counter Balanced/Gear Protection Systems.
• Quik-Lok™ Blade Clamp
• Includes: Heavy-duty carrying case, (2) Sawzall® blades.
Specifications
Volts: 120 V AC
Amps: 13 Amps
Strokes per minute: 0-3,000 spm
Stroke Length: 1-1/4"
Orbital Action: Yes
Weight: 14.4 lbs.
Part No. Description
6536-21 13 Amp Rotating Handle Super Sawzall®
Reciprocating Saw
6536-21
348 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MILWAUKEE RECIPROCATING SAW BLADES
*Note: When using 20 mm torch blades on Super Sawzalls with keyless blade clamp, operator must convert tool to blade clamp 49-22-5004. For keyed blade clamp
Super Sawzalls, convert to 49-22-5000 blade clamp.
TPI Stock Thickness
4/6 1/2" and above
5/8 3/8" and above
6, 7
TPI Stock Thickness
8/12
1/4" through 3/8"10
10/14
TPI Stock Thickness
14 3/16" through 1/4"
18 1/8" through 3/16"
24 below 1/8"
Tooth
Recommendations
See “Recommended for
Cutting" for proper blade
selection
The AX™ and the Torch® Demolition Blades
1/2" universal blade tang fits in all Sawzalls®
Bi-metal construction increases cutting speed and
blade life
Blades do not shatter
Matrix II teeth with 8% cobalt
Uniform gullet depth
Blade reversible in clamp
Exclusive “The AX" Features
062" thick for stiffer performance
Sloped shape ideal for plunge cutting
Strengthened tooth top
Wide bullet shape allows chips to clear the cut
Exclusive “The Torch" Features
.042" and .062" thick* for stiffer performance and longer life
More aggressive blade removes more material per stroke for
faster cutting
5/Pack 25/Pack TPI L x W x Th Recommended for Cutting
Wood, Nail Embedded Wood & Demolition
48-00-5021 48-00-8021 5/8 6 x 1 x .062 Excellent for plunge cutting into wood or nail embedded wood without bending
48-00-5026 48-00-8026 5/8 9 x 1 x .062 Walls that contain wood, nails, plaster and aluminum. Great for demolition
48-00-5027 48-00-8027 5/8 12 x 1 x .062 Extra long demolition blade
Demolition, Rescue and Remodeling
48-00-5700 48-00-8700 8 6 x 1 x .062
Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood
48-00-5705 48-00-8705 8 9 x 1 x .062
48-00-5710 48-00-8710 8 12 x 1 x .062
48-00-5712 48-00-8712 10 6 x 1 x .042
48-00-5713 48-00-8713 10 9 x 1 x .042
48-00-5782 48-00-8782 14 6 x 1 x .042
48-00-5787 48-00-8787 14 9 x 1 x .042
48-00-5784 48-00-8784 18 6 x 1 x .042
48-00-5788 48-00-8788 18 9 x 1 x .042
48-00-5789 48-00-8789 18 12 x 1 x .042
Demolition, Rescue and Remodeling
48-00-5795 48-00-8795 14 9 x 1 x .062 Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood
Also ideal for plunge cutting in rescue and demolition work.
48-00-5798 48-00-8098 18 9 x 1 x .062
Demolition, Rescue and Remodeling
48-00-5500* — 8 6 x 1 x .062
Metal pipe, channels, tubing, angle iron up to 4", steel, nail-embedded wood.
48-00-5510* — 8 9 x 1 x .062
48-00-5515* — 8 12 x 1 x .062
48-00-5512* — 10 6 x 1 x .042
48-00-5513* — 10 9 x 1 x .042
48-00-5582* — 14 6 x 1 x .042
48-00-5587* — 14 9 x 1 x .042
48-00-5570* — 14 12 x 1 .042
349
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MILWAUKEE RECIPROCATING SAW BLADES
Nail
Embedded
Wood
Wood Universal Specialty
Blade
For use
w/ Pipe
Clamp
Plaster
Drywall
Plunge
Cutting
Scroll
Cutting
Mild
Steel
Non-Ferrous
Metals
Aluminum
Pallet
Cutting
Cuts on
forward &
backward
stroke
Ceramic
Tile
Glass Fiberglass
Metal
Cutting
Tri-lingual
5/Pack 2/Pack 5/Pack 25/Pack 50/ Pack TPI L x W x Th Recommended for Cutting
Wood Cutting Blades
48-01-5011 - - - - 6 4 x 3/4 x .050 Fast cutting, all woods, nail embedded,
48-01-5012 - 48-00-5012 - 48-01-6012 6 6 x 3/4 x .050 composition materials.
Wood Cutting Blades
48-01-5031 48-02-5031 48-00-5031 48-00-8031 48-01-6031 5/8 6 x 3/4 x .050 Very fast cutting, nail embedded wood,
48-01-5035 48-02-5035 48-00-5035 - 48-01-6035 6 6 x 3/4 x .050 general roughing-in.
48-01-5036 48-02-5036 48-00-5036 48-00-8036 48-01-6036 6 9 x 3/4 x .050
48-01-5037 48-02-5037 48-00-5037 - 48-01-6037 6 12 x 3/4 x .050
48-01-5041 48-02-5041 48-00-5041 - 48-01-6041 4/6 6 x 1/2 x .050 Very fast scroll cutting, circles, contours,
nail embedded wood.
Wood and Plastic Cutting Blades
- - 48-00-5015 - - 6 6 x 3/4 x .050 Fleam filed teeth for extremely sharp, fast
- - 48-00-5016 - - 6 9 x 3/4 x .050 cutting with a smooth edge in nail free
- - 48-00-5017 - - 6 12 x 3/4 x .050 wood and plastics.
Plastic Cutting Blade
48-01-5052 48-02-5052 48-00-5052 - 48-01-6052 6 5 x 3/4 x .050 Long life, plaster, plaster with metal lath,
plasterboard. Cuts forward and
backward stroke.
All Purpose Blades
48-01-5090 - 48-00-5090 - 48-01-6090 10 4 x 3/4 x .035 All woods, nail embedded, composition
48-01-5092 48-02-5092 48-00-5092 - 48-01-6092 10 6 x 3/4 x .035 material, plastic, ferrous and non-ferrous metals.
48-01-5091 48-02-5091 48-00-5091 - 48-01-6091 8/12 6 x 3/4 x .050 All woods, nail embedded, composition
48-01-5093 48-02-5093 48-00-5093 48-00-8093 48-01-6093 8/12 8 x 3/4 x .050 material, plastic, ferrous and non-ferrous
48-01-5094 48-02-5094 48-00-5094 - 48-01-6094 8/12 12 x 3/4 .050 metals, cast iron.
48-01-5193 - 48-00-5193 - 48-01-6193 10/14 8 x 5/8 x .035 All woods, nail embedded, composition
48-01-5194 - 48-00-5194 - 48-01-6194 10/14 12 x 5/8 x .035 material, plastic, light gauge non-ferrous
metals and aluminum. Has 5/8" width for
higher flexibility.
Metal Scroll Cutting Blades
48-01-5161 - 48-00-5161 - - 10 3-5/8 x 5/16 x .035 Scroll cutting wood, contours, nail embedded
wood, plastics.
48-01-5162 48-02-5162 48-00-5162 - - 14 3-5/8 x 5/16 x .035 Scroll cutting metal 1/8" thru 3/16".
48-01-5163 - 48-00-5163 - - 18 3-5/8 x 5/16 x .035 Scroll cutting metal under 1/8".
Metal Cutting Blades
48-01-5181 - 48-00-5181 - 48-01-6181 14 4 x 3/4 x .035 Metal 3/16" thru 1/4", conduit, tubing,
48-01-5182 48-02-5182 48-00-5182 48-00-8182 48-01-6182 14 6 x 3/4 x .035 channels, pipe, rubber, fiber.
48-01-5282 - 48-00-5282 - 48-01-6282 14 6 x 5/8 x .035 Same as 48-01-5182, but has 5/8" width for
higher flexibility.
48-01-5187 48-02-5187 48-00-5187 - 48-01-6187 14 9 x 3/4 x .035 Metal 3/16" thru 1/4", conduit, tubing,
channels, pipe, rubber, fiber.
48-01-5183 - 48-00-5183 - 48-01-6183 18 4 x 3/4 x .035 Metal 1/8" thru 3/16", conduit, tubing,
48-01-5184 48-02-5184 48-00-5184 48-00-8184 48-01-6184 18 6 x 3/4 x .035 channels, pipe.
48-01-5284 - 48-00-5284 - 48-01-6284 18 6 x 5/8 x .035 Same as 48-01-5148, but has 5/8" width for
higher flexibility.
48-01-5188 48-02-5188 48-00-5188 - 48-01-6188 - 18 9 x 3/4 x .035
48-01-5189 48-02-5189 48-00-5189 - 48-01-6189 - 18 12 x 3/4 x .035
48-01-5185 - 48-00-5185 - 48-01-6185 - 24 4 x 3/4 x .035
48-01-5186 48-02-5186 48-00-5186 48-00-8186 48-01-6186 - 24 6 x 3/4 x .035
48-01-5286 - 48-00-5286 - 48-01-6286 - 24 6 x 5/8 x .035 Same as 48-01-5186, but has
5/8" width for higher flexibility.
Metal 1/8" thru 3/16", conduit,
tubing, channels, pipe.
Metal thinner than 1/8",
tubing, pipe, trim.
350 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LENOX RECIPROCATING SAW BLADES
* Denotes Best Selling Blades
Part No. L x W x Th TPI Shape Recommended Usage
LEN656R 6 x 3/4 x .050 6
Roughing-in work and nail-embedded wood. Fast cutting,
pipe, structural steel, stainless steel, non-ferrous metal:
3/16" and thicker.
LEN156R 12 x 3/4 x .050 6
LEN956R 9 x 3/4 x .050 6
LEN676RC 6 x 7/16 x .050 6 Contour cutting in all woods, nail-embedded wood and
composition material
LEN606R 6 x 3/4 x .035 6 Fast cutting wood, composition materials, plastics, and
non-ferrous.
LEN634R 6 x 3/4 x .035 4 Extra fast cutting in thick, nail-free wood.
LEN610R* 6 x 3/4 x .035 10
Nail-embedded wood, composition materials, and plastics. Pipe,
carbon, steel, stainless steel: 1/8"- 1/4"; ferrous metal: 1/8"-1/2"
thick.
LEN810R 8 x 3/4 x .050 10
LEN110R 12 x 3/4 x .050 10/14
LEN314RC 3 x 1/4 x .032 14 Contour cutting in wood <3/4" and in metal 3/32"-5/16
LEN414R 4 x 3/4 x .035 14 Pipe, structural steel, stainless steel: 3/32"-1/4". Non-
ferrous metal: 3/23"-3/8" hard rubber.
LEN614R*6 x 3/4 x .035 14
LEN418R*4 x 3/4 x .035 18
Structural steel, pipe, conduit, stainless steel: 1/16"-3/16".
Non-ferrous metal: 1/16"-5/16" Pallet cutting for 618R and
818R blades only
LEN618R*6 x 3/4 x .035 18
LEN818R 8 x 3/4 x .035 18
LEN318RC 3 x 1/4 x .032 18 Contour cutting in metal: 1/16"-1/8" thick.
LEN424R 4 x 3/4 x .035 24
All metals less than 1/8" thick. Tubing, conduit, trim.
LEN624R 6 x 3/4 x .035 24
LEN636RP 6 x 3/4 x .050 6 For plaster, plaster board and lath. Bi-directional cutting.
EN600RG 6 x 3/4 x .032
Medium
Carbide
Grit
Pipe, structural steel, stainless steel, non-ferrous metal:
5/32" and thicker. Nail-embedded.
LEN100RG 8 x 3/4 x .050 Cast iron, fiberglass, ceramic tile, clay pipe, stone, brick,
plaster, marble.
LEN800RG 8 x 3/4 x .040
LEN966R*9 x 7/8 x .062 6 DEMO Demolition work in nail-embedded wood.
LEN960R*9 x 7/8 x .062 10 DEMO Demolition work in wood and metal. Fire and rescue.
LEN650R 6 x 3/4 x .050 10/14 LAZER 3-16" - 3/4" LAZER
Fire and rescue.
Heavy-duty.
Extended life
when cutting
pipe, structural
steel, stainless steel:
LEN6110R 6 x 3/4 x .042 10 LAZER 1/8" - 1"
LEN6114R 6 x 3/4 x .042 14 LAZER 3-32" - 3/8"
LEN6118R 6 x 3/4 x .042 18 LAZER 1/16" - 1/4"
LEN114R 9 x 3/4 x .042 14 3/32" - 3/8"
LAZER
351
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HACK SAW BLADES / FRAMES
No. 4012 Hackmaster®
High Tension Hand Hacksaw Frame
With 12” blade. Tension to 28,000 psi.
The finest frame you can buy.
Part No. Description
20918-4012 Hacksaw frame
Length x Width x Gauge Teeth Bi-Metal Box
12 x 1/2 x .025 14 20115-214HE
12 x 1/2 x .025 18 20116-218HE
12 x 1/2 x .025 24 20117-224HE
12 x 1/2 x .025 32 20117-232HE
Specifications
Hacksaw Blades
• Shatterproof Hackmaster 2® bi-metal blades cut stainless, pipe, conduit, bar and rod, aluminum, brass, copper,
almost any material
• With high tension frames, you get the straightest possible cuts, longest life
• Full assortment of frames, handles
No. 975 Hacksaw
Rugged die-cast aluminum. Designed for
hard to get at places. Cuts bolts, wire,
tubing and plastic. With bi-metal 10”
blade which outlasts up to 10 ordinary
blades.
Part No. Description
20975-975 Hacksaw
Tri-Fold® Saw
• Resists breakage
• Easy blade change
• Cuts in hard to get at places
• Heavy duty aluminum handle
• Complete with 6” (150 mm) Lenox
Reciprocating Blade
• Blade folds away safely
• Locks in 3 positions
• Comfortable hand grip
• Hanging hole in handle
• Accepts reciprocating blades using 1/2”
tang
• Easy to carry on the job - fits in
your pocket
Part No. Description
20992-3636 Tri-Fold Saw
PVC/ABS Plastic
Pipe Hand Saw
Designed especially to cut PVC and ABS
plastic pipe without binding. Can also
do other general cutting of plastic and
wood. Cuts on both push and pull strokes.
Die-cast aluminum handle, replaceable
tempered carbon steel 12” or 18” blade.
Part No. Description
20980-HSF-180 18" blade & handle
20985-HSF-120 12" blade & handle
20981-HSB-18 18" replacement blade
20982-HSB-12 12" replacement blade
Gray Wolf™
5012 Hacksaw Frame
Frame has 4” pipe clearance combined
with sloped front for access in tight work
spaces.
Part No. Description
25012 Hacksaw frame
Replacement Utility Knife
Blades
Part No. Description
EDG50D Lenox Edge 50 Pack
EDG100D Lenox Edge 100 Pack
EDG5C Lenox Edge 5 Pack
Locking Tradesman Utility Knife
• Easy open and close
• Comfort Grip
• Multi-Use Tool
• Built-in wire stripper
Part No. Description
10771 LENOX Gold Locking
Tradesman Utility Knife
Retractable Utility Knife
• Tough zinc die-cast body
• 3 Position retractable blade
• Non-slip thumb rest
• Extra blade storage inside
• 2 Lenox Edge™ shatter-resistant bi-metal
blades included
Part No. Description
10099 Retractable Knife
352 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED PORTABLE BAND SAWS
6230N
Deep Cut Portable Band Saw
• 10.5 Amp Motor
• 0-420 SFPM - Up to 40% faster cuts
• 4-7/8" Cutting Capacity - deeper cuts
• Variable Speed Dial & Trigger -
adjusts the speed for different materials
• Multi-Grip T-Handle -provides multiple
grip options for increased control
• Rear Blade Guard - 30% thicker steel
protects the guard from bending or
pinching during material break-through
• Adjustable Material Guide
• 2-Finger Variable Speed Trigger - ability
to start the cut slowly for accuracy
Specifications
Volts: 120 V AC
Amps: 10.5 Amps
Speed (ft./min.): 0-420 sfpm
Max Capacity: 4-7/8" (Round or
Rectangular)
Weight: 17.5 lbs.
Part No. Description
6232-6N Deep Cut Portable Band
Saw, with Carrying Case
6230N Deep Cut Portable Band Saw
Deep Cut Portable Band Saw
• 10.5 Amp Motor
• 420/320 SFPM - Up to 40% faster cuts
• 4-7/8" Cutting Capacity - deeper cuts
• Hi/Lo Switch - adjusts the speed for
different materials
• Multi-Grip T-Handle -provides multiple
grip options for increased control
• Rear Blade Guard - 30% thicker steel
protects the guard from bending or
pinching during material break-through
• Adjustable Material Guide
Specifications
Volts: 120 V AC
Amps: 10.5 Amps
Speed (ft./min.): 420/320 sfpm
Max Capacity: 4-7/8" (Round or
Rectangular)
Weight: 17.5 lbs.
Part No. Description
6238N Deep Cut Portable Band
Saw, with Carrying Case
6236N Deep Cut Portable Band Saw
6236N
Portable Band Saw
• Cuts up to 3-1/2 in. x 4-1/2 in. rectangu-
lar stock and 3-1/2 in. round stock.
• 6.0/5.0 amp, AC only.
• Two-speeds: 200 and 250 sfpm.
• Uses standard 44-7/8 in. x 1/2 in. x .020
in. band saw blades.
6225
Specifications
Volts: 120 V AC
Amps: 6.0/5.0 Amps
Speed (ft./min.): 250/200 fpm
Max Capacity: 3-1/2" x 4-1/2"
(Rectangular)
3-1/2" (round)
Weight: 16.0 lbs.
Part No. Description
6226 Portable Band Saw,
with Carrying Case
6225 Portable Band Saw
Compact Band Saw
• 45% Lighter than Deep Cut – Compact,
light-weight design for cutting overhead
and in tight places.
• 200-360 SFPM Variable Speed Dial
• 3-1/4" Cut Capacity – cuts most com-
mon materials for Electrician, Plumber
and Mechanical cutting applications.
• Tool-Free Adjustable Material Shoe – al-
lows flush cuts when working with installed
materials against walls and ceilings.
• LED Work Light – illuminates the cut line.
• Quick change Blade Ejection System.
• Drop Resistant Pulley Guard
• Cast Aluminum Gear Case.
Specifications
Volts: 120 V AC
Amps: 7 Amps
Speed (ft./min.): 200-360 sfpm
Max Capacity: 3-1/4" x 3-1/4"
(Rectangular)
3-1/4" (round)
Weight: 9.5 lbs.
Part No. Description
6242-6N Compact Band Saw,
with Carrying Case
6242-6N
Milwaukee Compact Bandsaws require a
35-3/8" x 1/2" x .020" Blade - Please see
page 353
COMPACT
353
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED PORTABLE BAND SAWS
DWM120K
Deep Cut
Variable Speed Band Saw Kit
• 10 amp motor designed with controlled
power to withstand any jobsite application
• 5" deep cut capacity for rectangular or
round stock
• Steel shroud and rubber bumpers with-
stands jobsite abuse
• LED sight light
• Integrated hang hook
• Variable speed dial (100-350 spm).
• Multi-position adjustable large front handle.
• Blade changing lever loosens blade ten-
sion to allow for blade change
• Externally replaceable brushes allow for
quick repairs on the jobsite
• Includes band saw blade and case.
Specifications
Volts: 120 V AC
Amps: 10.0 Amps
Speed (ft./min.): 100-350 fpm
Max Capacity: 5" (Round)
5" x 4-3/4"
Rectangular)
Weight: 15.0 lbs.
Part No. Description
DWM120K Deep Cut Variable Speed Band
Saw Kit
Portable Bands® Master-Band Specifications
For use with Milwaukee and other Band Saws
Features Advantages Benefits
• Bi-Metal construction
• Matrix II Type alloy high speed steel
• Tooth hardness RC 66-68
• Edge contains 8% Cobalt
• Tough Shock Resistant Alloy with less
tooth chippage
• Withstands higher cutting temperatures
than M2 or carbon steel blades
• Lasts longer on interrupted cuts, and
mild to difficult to machine materials
• Attains higher productivity than M2 or
carbon steel blades
Master-Band®Wolf-Band®
Size 3-Pack 5-Pack 25-Pack TPI Application
44-7/8" x 1/2" x .020
Fits Black & Decker,
Greenlee, Milwaukee,
Porter Cable, DeWalt
and Ridgid
80114-38EW 80098-38PW-10/14 38423-38PW-10/14 10/14 1/4" and larger
80115-38EW 80107-38PW-14 38424-38PW-14 14 3/16" - 3/8"
80112-38EW 80099-38PW-14/18 38427-38PW-14/18 14/18 1/8" - 5/16"
80116-38EW 80108-38PW-18 38425-38PW-18 18 3/32" - 1/4"
80117-38EW 80109-38PW-24 38426-38PW-24 24 up to 1/8"
53-3/4" x 1/2" x .020
Fits Greenlee and
Porter Cable
80119-45EW 10/14 1/4" and larger
80120-45EW 14 3/16" - 3/8"
80123-45EW 14/18 1/8" - 5/16"
80121-45EW 18 3/32" - 1/4"
80122-45EW 24 up to 1/8"
Bi-Metal Band Saw Blade Specifications
Size Part No. TPI Cutting Thickness Application
44-7/8" x 1/2" x .020
Super-Tough®
100/Pack
48-39-0512 14 3/16" - 5/16" High speed cutting of aluminum
48-39-0522 18 5/32" - 3/16"
Aluminum, angle iron, bronze,brass, copper, galvanized
pipe, mild steel; and tougher steels, including stainless,
chrome,tungsten steel plus other problem materials. Slow
speeds
44-7/8" x 1/2" x .020
Multi-Tooth®
100/pack
48-39-0552 10/14 3/16" - 1/2" For interrupted cutting applications (tubing, structural, etc.) Also
production cutting of solids in a variety of sizes or shapes.
48-39-0562 14/18 5/32" - 5/16" Stainless steel
35-3/8" x 1/2" x .020
Compact Band Saws
48-39-0517 14 3/16" - 5/16" High speed cutting of aluminum
48-39-0527 18 5/32" - 3/16"
Aluminum, angle iron, bronze,brass, copper, galvanized
pipe, mild steel; and tougher steels, including stainless,
chrome,tungsten steel plus other problem materials.
354 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED CIRCULAR SAWS
6390-21 Tilt-Lok™ 7-1/4" Circular Saw
• New exclusive Tilt-Lok™ main handle adjusts to the work or most comfort-
able work position.
• 10.4 pounds net weight - lightest 7-1/4 inch, 3.25 maximum horsepower
saw reduces operator fatigue, easier to handle.
• Wide, clear sight line - superior blade visibility from either side.
• Includes: Carrying Case for Circular Saws, Circular Saw Blade, Hex Blade Wrench.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 5,800 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 56 degrees
Blade Diameter: 7-1/4"
Depth of Cut @ 90°: 2-7/16"
Depth of Cut @ 45°: 1-13/16"
Weight: 10.4 lbs.
6390-21
6394-21 Tilt-Lok™ 7-1/4" Circular Saw w/ Electric Brake
• Exclusive Tilt-Lok™ main handle adjusts to the work for most comfortable
work position.
• Patented power assisted electric brake stops blade in second.
• Quik-Lok® cord makes job site replacement fast and easy.
• Powerful 3.0 max. horsepower, 15 amp motor.
• Includes: Carrying Case for Circular Saws, Circular Saw Blade, Hex Blade Wrench.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 5,800 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 56 degrees
Blade Diameter: 7-1/4"
Depth of Cut @ 90°: 2-7/16"
Depth of Cut @ 45°: 1-13/16"
Weight: 10.4 lbs.
6394-21
DW368 Heavy Duty 7-1/4" Lightweight Circular Saw
• 15 Amp, 2,200 MWO motor powerful enough for the toughest applications.
• 56° beveling capacity with stops at 45° and 22.5° allows for aggressive bevel cuts
while allowing user to locate common angles quickly.
• Magnesium shoe designed for increased durability.
• Clear line of sight aids in blade visibility from any angle.
• Lower guard design improves performance when making bevel cuts and cut-
ting shims.
• Includes: Carbide tipped blade, blade wrench, heavy-duty kit box.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
Max Watts Out: 2,200 W
No-Load Speed: 5,800 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 56 degrees
Bevel Stops: 45° / 22.5°
Blade Diameter: 7-1/4"
Depth of Cut @ 90°: 2-3/8"
Depth of Cut @ 45°: 1-3/4"
Weight: 9.5 lbs.
DW368
355
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED CIRCULAR SAWS
6470-21 10-1/4" Circular Saw
• 15 amp motor: AC-DC.
• 5200 rpm
• 3-13/16 inch maximum depth at 90 degrees
• High capacity: cuts 4X4's.
• Includes: Carrying Case for 10-1/4 in. Saw, Circular Saw Blade, 9/16 in. Wrench,
Rip Fence, Side Handle.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 5,200 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 60 degrees
Blade Diameter: 10-1/4"
Depth of Cut @ 90°: 3-13/16"
Depth of Cut @ 45°: 2-3/4"
Weight: 17.8 lbs.
6470-21
6577-20 7-1/4" Worm-Drive Circular Saw
• Maximum cutting performance and does not bog down, even under heavy loads.
• Hardened steel worm gearing provides maximum torque
• Magnesium Construction- durable, lightweight.
• Heavy-Duty Composite Shoe- will not warp, bend or kick up a burr.
• Exclusive Oil Site Glass-instantly gauge current oil level.
• Folding Rafter Hook- Allows quick, convenient storage of tool.
• Highly Visible Depth and Bevel Scales- visible from behind the body of the saw.
• Includes: 24T Carbide Tipped Blade, Blade Wrench.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 4,400 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 56 degrees
Bevel Stops: 45° / 22.5°
Blade Diameter: 7-1/4"
Depth of Cut @ 90°: 0 to 2-7/16"
Depth of Cut @ 45°: 0 to 1-25/32"
Weight: 14.3 lbs.
6577-20
6370-20 8" Metal Cutting Circular Saw
• Dry-cut technology provides faster, cleaner, more affordable metal cutting.
• Durable blade shield with integral chiptank deflects/collects hot chips and sparks.
• Plunge lever for fast, effective plunge cuts.
• Exclusive quick-release shield latch for fast waste disposal and blade changes.
• 2-9/16 in. cut depth for one-pass cuts through most common materials.
• Powerful 13.0 amp, 3,700 rpm motor.
• Premium cermet-tipped blades cut faster, cleaner, and longer than other carbide-
tipped or friction blades.
• Includes: Hex Blade Wrench, Circular Saw Blade, Carrying Case.
Specifications
Volts: 120 V AC
Amps: 13.0 Amps
No-Load Speed: 3,700 rpm
Metal/Wood Cutting: Metal
Blade Diameter: 8"
Depth of Cut @ 90°: 2-9/16"
Weight: 13.3 lbs.
6370-20
356 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED CIRCULAR SAWS
Metal Devil® Metal Cutting Circular Saws
Metal Devil metal cutting circular saws have a sturdy, heavy-duty
feel as they cut through metal smoothly and with minimum effort.
This saw was built to cut metal with a unique motor design that
maintains torque and operates at the optimum RPM as the blade
moves through steel, thin steel, aluminum and stainless steel.
Features
• Sure grip handles help steady saw during cutting
• Special motor maintains torque at optimum RPM's during cutting
• NEW! Quick Release Chip Collection collects virtually all chips
• Durable carrying case
• Upper chamber also minimizes sparks and deadens sound
• Guide arrows and sight opening make it easier to position blade
• 9" saw can cut beveled edges with Laster Line cutting guide
Three sizes of metal-cutting saws are available from The M.K.
Morse Company. Although Morse Metal Devil™ saw blades are
available in sizes ranging from 5-3/8" to 14" diameter, the 7" and
9" blades fit perfectly on these Metal Devil saws. This makes it
easy for you to match the best metal-cutting circular saw blades
with the best metal-cutting circular saws available today.
Morse Metal Devil saw blades and saws - the
Faster, Cooler, Smoother way to cut ferrous and
non-ferrous metals, alike.
CSM7MB 7" Metal Cutting Circular Saw
• External Overload Switch
• Chip Collection Chamber
• Retractable Blade Guard
• Includes: (2) Allen Wrenches for blade changes, (1) 7" Metal Devil® Steel Cutting
Blade, Length Adjuster, Side Handle, Safety Glasses, Ear Plugs, Carrying Case.
Specifications
Arbor Size: 20mm Blade Size: 7"
Amps: 11 Max. Cutting Depth: 2.36"
Watts: 1080 Cord Length: 8'
RPM: 3,500 Weight: 13 lbs.
CSM9MB 9" Metal Cutting Circular Saw
• Laser Guide
• 0° - 45° Beveling
• 30 minute duty cycle
• Overload Switch
• Chip Collection Chamber
• Retractable Blade Guard
• Includes: Stamped Wrenche for blade changes, (1) 9" Metal Devil® Steel Cutting Blade,
Safety Glasses, Ear Plugs, Carrying Case.
Specifications
Arbor Size: 1" Blade Size: 9"
Amps: 15 Max. Cutting Depth: 3-1/4"
Bevel Cut: 0° - 45° Max. Thickness of Cut: 3/8"
Watts: 1800 Cord Length: 8'
RPM: 2500 Weight: 19.75 lbs.
CSM14MB 14" Metal Cutting Circular Saw
• 0° - 45° Mitering Vice
• Plexiglas Safety Shield
• Chip Collection Chamber
• Retractable Blade Guard
• Cutting Capabilities: Round @ 45° – 4-1/8"; @ 90° – 5-1/8"
Square @ 45° – 3-1/2" x 3-1/2"; @ 90° – 4-3/4" x 4-3/4"
Rectangular @ 45° – 3-1/8" x 4-3/8"; @ 90° – 3-3/4" x 7-1/4"
• Includes: 6mm and 8mm Hex Wrenches for blade changes, (1) 14" Metal Devil® Steel
Cutting Blade, Safety Glasses, Ear Plugs, Carrying Case.
Specifications
Arbor Size: 1" Blade Size: 14"
Amps: 15 Miter Cut: 0° - 45°
Watts: 1800 Cord Length: 8'
RPM: 1300 Weight: 13 lbs.
CSM7MB
CSM9MB
CSM14MB
357
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CIRCULAR SAWS BLADES
Metal Devil® Metal Cutting
Circular Saws Blades
Cuts Quicker, Cooler,
Longer
• Designed for use with the
Metal Devil® Metal Cutting
Circular Saws, but IMPROVES
the performance of any stan-
dard saw.
• Moves through metal up to
5X faster.
• Cut metal pieces may be
handled safely immediately after cutting
• Finished cut is burr-free and ready for finishing.
Part No. Dia. Bore Max RPM # Teeth Application
100137
7" 20MM 5400
36T Steel
100144 48T Stainless Steel
100151 54T Aluminum
100168 68T Thin Steel
100304
9" 1" 3200
48T Steel
100403 60T Stainless Steel
100328 80T Aluminum
100311 68T Thin Steel
100410 10" 5/8"
KO
5200 52T Thin Steel
100427 5500 80T Aluminum
100366
14" 1"
1800 72T Steel
100373 3800 80T Aluminum
100694 1800 90T Stainless Steel
100380 1800 90T Thin Steel
Dry Cut Metal Blades - 5/8" Arbor
48-40-4515
This 8” 42 tooth blade is
designed to cut a variety of
ferrous materials 3/32 inch and
thicker. The blade has vibration
damping which reduces heat,
sparks and noise for cleaner,
smoother, burr free cuts. Use
with Milwaukee Dry Cut Saw
6370-20.
48-40-4520
This 8” 50 tooth blade is
designed to cut a variety of
ferrous materials 3/32 inch and
thinner. The blade has vibration
damping which reduces heat,
sparks and noise for cleaner,
smoother, burr free cuts. Use
with Milwaukee Dry Cut Saw
6370-20.
DW7747
(70T) - Heavy Gauge Steel
DW7745
(90T) - Light Gauge Steel
DW7749
(90T) - For Stainless Steel
Features:
• 12% titanium carbide pro-
vides long life in metal cutting
• Modified ATB tooth geometry
provides clean, burr-free cuts
• Tri-foil braze absorbs stress,
making the tip stronger
• Expansion slots dissipate
heat which extends blade life
48-40-4505 (72T)
48-40-4510 (90T)
This 14 in. blade is designed
to cut a variety of ferrous
materials including pipe, angle
iron, metal studs and conduit.
The blade has vibration
damping which reduces heat,
sparks and noise for cleaner
smoother, burr free cuts. For
use with Milwaukee Dry Cut
Machine 6190-20.
14"
8"
Dry Cut Metal Cutting Blades
for Chop Saws - 14"
14"
Cheetah Thin Kerf Saw
7-1/2" Blades
Ultra Thin - Carbide Tipped
24 tooth, 7-1/2", thin cut
saw blades for smooth, fast
thin cuts. Carbide design for
aggressive sawing progress with
less burden on the machine and
user. Less material waste and
more accurate cuts.
Part No. Description
UC-130-724 Thin Kerf-
UC-120-724 Ultra Thin Kerf
DW3577 DeWalt 7-1/2"
General Purpose Blade
• Thin Kerf - for fast, efficient cuts
• Carbide teeth - for job site
durability
• Expansion slots - allow blade
to expand to prevent warping
for long life.
Part No. Description
DW3577 General Purpose
Blade - 7-1/4"
For Wood/General Purpose Cutting
48-40-4025
This 6-1/2” 40
carbide teeth blade is
specially engineered
heat expansion
slots prevent blade
distortion and
increase blade life.
Recommended for use
on fiber cement. 6-1/2"
358 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CORDED DRY CUT SAWS
71687 Model 614 14" Dry Cut Saw
• Powerful 15 amp motor.
• Cut different materials and geometric con-
figuration without cutting fluid.
• Generates no burr, abrasive dust or heat,
providing clean and fast cuts on steel, cop-
per, plastic and wood.
• Miter cut up to 45°.
• Largest cutting capacity in its class.
• Spindle lock.
• Dust collector.
• Built-in maintenance tools.
• Exclusive quick-acting vise.
• Includes: 14" carbide tipped blade, two mainte-
nance tools.
6190-20 14 " Dry-Cut Machine
• Powerful 4.8 max HP motor, 15 amp motor (1,500 rpm).
• Tool-free fence and vise system.
• Heavy-duty cast base.
• Horizontal D-handle for optimum comfort.
• Largest cutting capacity in class.
• Cuts fast with virtually no sparks or burrs.
• Includes: Circular Saw Blade 14 in. 72 Tooth Dry Cut Carbide Tipped, Hex Key.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 5,200 rpm
Metal/Wood Cutting: Wood
Bevel Capacity: 45 degrees
Blade Diameter: 14"
Capacity - O.D. Pipe: 5-3/8"
Capacity - Square: 5"
Maximum Opening: 8"
Weight: 50 lbs.
6190-20
DW872 Heavy Duty 14" Multi-Cutter Saw
• Multi-Cutter offers versatility by cutting a wide variety of materials including
ferrous and non-ferrous metals.
• Largest capacity in its class.
• Patented tool-free, 45º adjustable fence allows for fast and accurate angle cuts.
• Quick-lock vise allows for fast clamping on different size materials.
• Extra wide solid steel base provides increased stability.
• On-board wheel change wrench.
• Spindle lock allows users to make wheel changes quickly and easily.
• Adjustable chip deflector.
• Heavy-duty compression spring provides smooth movement and greater
durability than torsion springs.
• Quick-retracting guard allows user to see the line of cut.
• Vertical clamp provides the user with the most efficient clamping system in
the industry
• Includes: 14" carbide tipped blade, wrench, vertical clamp.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 1,300 rpm
Bevel Capacity: 56 degrees
Bevel Stops: 45° / 22.5°
Wheel Diameter: 14"
Capacity - Round: 5-3/16"
Capacity - Rectangle: 6-1/2" x 4-1/2"
Weight: 47 lbs.
DW872
Cat. No. Description
71697 12” Carbide-Tipped Blade 60 Tooth
71692 14” Carbide-Tipped Blade 80 Tooth
Blades for RIDGID Models 614 & 590 Dry Cut Saws
359
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CORDED ABRASIVE CHOP SAWS
DW871 Heavy Duty 14" Chop Saw
• Powerful 15.0 Amp/5.3 HP (maximum motor HP) motor.
• Patented tool-free, 45° adjustable fence.
• Quick-lock vise allows for fast clamping on different size materials.
• Extra wide solid steel base provides increased stability.
• The solid steel base also allows users to weld jigs or stops directly to the base.
• Heavy-duty compression spring provides smooth movement and greater
durability than torsion springs.
• The four pre-drilled holes in the base allow easy bolt down to any work bench.
• Durable metal top handle allows saw to be carried easily.
• Spindle lock allows user to make wheel changes quickly and easily.
• Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle) provides the
ability to cut a wide variety of materials.
• Allows users to channel sparks.
• Includes: 14" abrasive wheel, wrench.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 3,800 rpm
Wheel Diameter: 14"
Capacity - Round: 5"
Capacity - Rectangle: 4-1/2" x 6-1/2"
Weight: 40 lbs.
6176-20 14 " Abrasive Cut-Off Machine
• 15 amp, 2400 watts/3.2 maximum horsepower power output.
• 3900 RPM, 5 inch pipe cutting capacity.
• Heavy-duty cast iron base.
• Spindle lock for convenient changing of abrasive wheels.
• Includes: Vise, Abrasive Wheel, Hex Wrench.
Specifications
Volts: 120 V AC
Amps: 15.0 Amps
No-Load Speed: 3,900 rpm
Metal/Wood Cutting: Metal
Bevel Capacity: 45 degrees
Blade Diameter: 14"
Capacity - O.D. Pipe: 5"
Capacity - Square: 5"
Capacity - Bar: 3-5/8"
Maximum Opening: 9"
Weight: 47 lbs.
6176-20
DW871
General Purpose Cut-off Wheels
• Type 1 shape for square, burr-free cut-
ting,
• Externally reinforced with fiberglass
layers to withstand the toughest ap-
plications.
• SAI123420 rated to 6,300 max
rpm; SAI123450 rated to 5,400
max rpm.
• Packaged 10/box.
• For use on ferrous metals.
(Sold in full box quantities only)
Part No. Description (in) Pkg
SAI23420 12"x 1/8" x 20mm 10/box
SAI23450 14"x 1/8" x 1" 10/box
EZ-Chop™ Saw Blades
• Aluminum oxide grain.
• General Purpose cool cutting on thin
metals.
• Burr-free finish.
• SAI24034 rated to 5,100 max rpm;
SAI24039 rated to 4,400 max rpm;
• Packaged 10/box.
• Use for metal studding, thin rebar,
light gauge metals.
(Sold in full box quantities only)
Part No. Description (in) Pkg
SAI24034 12"x 3/32" x 1" 10/box
SAI24039 14"x 3/32" x 1" 10/box
360 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Variable Temperature Heat Gun
• Variable temperature 140° to 1040° F
• Unique impact resistant heating element
• Efficient soft air velocity increases
surface temperature much faster than
conventional hot air heat guns.
• Rotate rear housing to select temperature.
• Includes: Heat Gun Accessory Assortment,
Carrying Case for 8975-6 and 8977-20
Heat Guns.
Specifications
Volts: 120 V AC
Amps: 11.6 Amps
Air Temperatures: 140°F - 1040°F
Air Volume: 14.8 cu. ft./min.
Weight: 1.6 lbs.
Part No. Description
8977-6 Variable Temperature Heat Gun
8977-6
SHEARS / NIBBLERS / HEAT GUNS
Swivel Head Shear
• 6.8 amp Milwaukee motor, trigger speed
control: 0-2,500 rpm spindle speed.
• 360° swivel head.
• Ergonomic tactile grip for optimal user
comfort.
• 10 ft. flexible durable runner cord.
• Includes: Hex Wrench.
Specifications
Volts: 120 V AC
Amps: 6.8 Amps
No Load Speed: 0-2,500 spm
Min. Cutting Radius: 7"
Weight: 4.1 lbs.
Part No. Description
6852-20 Swivel Head Shear
16 Gauge Nibbler
• 3.8 amp, 1,900 spm.
• Cuts up to 7 ft. per minute.
• 7/8 in. starting hole required.
• AC-DC paddle switch.
• Includes: Punch - 16 Gauge Die - 16
Gauge, Allen Wrench, Plate Wrench.
Specifications
Volts: 120 V AC
Amps: 3.8 Amps
No Load Speed: 0-1,900 spm
Min. Cutting Radius: 1-3/4"
Weight: 4.8 lbs.
Part No. Description
6890 16 Gauge Nibbler
10 Gauge Nibbler
• 4.0 amp, 1,000 SPM.
• Cuts up to 8.75 ft. per minute.
• 1.65 in. starting hole required.
• AC-DC toggle switch allows for two-
handed operation.
• 12 gauge capacity in stainless steel.
• Includes: Punch - 10 Gauge Die - 10
Gauge, Allen Wrench, Side Handle.
Specifications
Volts: 120 V AC
Amps: 4.0 Amps
No Load Speed: 0-1,000 spm
Min. Cutting Radius: 2-1/2"
Weight: 7.8 lbs.
Part No. Description
6880 10 Gauge Nibbler
Shears Nibblers
Dual Temperature Heat Gun
• Dual temperature 570° & 1000° F.
• Unique impact resistant heating element.
• Efficient soft air velocity increases sur-
face temperature much faster.
• 3-position rocker switch - off, high & low.
Specifications
Volts: 120 V AC
Amps: 11.6 Amps
Air Temperatures: 570°F/1000°F
Air Volume: 14.8 cu. ft./min.
Weight: 1.6 lbs.
Part No. Description
8975-6 Dual Temperature Heat Gun
6880
6890
6852-20
8975-6
Variable Temperature Heat Gun
• Variable temperature 200° to 1050° F
• Unique impact resistant heating element.
• Heat Adjustment Dial (1-6) for tempera-
tures ranging from 200° to 1050° F.
• Electronic control allows extra reduction
of air flow for more accurate and con-
centrated heat location without damage
to heating element.
Specifications
Volts: 120 V AC
Amps: 12.5 Amps
Air Temperatures: 200°F - 1050°F
Air Volume: 14.8 cu. ft./min.
Weight: 1.8 lbs.
Part No. Description
8978-6 Variable Temperature Heat Gun
8978-6
Heat Guns
361
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MECHANICAL BENDERS
Hickeys with Welded Handles
• Heavy-duty cast steel head.
• Welded steel handle.
• Bend tight radius stub-ups.
Part No. Description
508 Hickey for ½" Rigid Conduit
512 Hickey for ¾" Rigid Conduit
516 Hickey for 1" Rigid Conduit
Little Kicker® Offset Bender
• Bends offsets in one easy operation. Insert conduit, depress
handle, release and remove conduit.
• Makes identical offsets every time for wall mounted boxes with
exposed conduit.
• Depress handle to create offset that matches knockout in box.
• Maximum offset of .56". (9/16")
• Mounting holes for permanent positioning.
• Includes 3/8" female hydraulic connector and dust cap.
Part No. Description
1810 Offset bender for ½" EMT
1811 Offset Bender for ¾" EMT
1800 Mechanical
Bender for IMC & Rigid
Conduit
• Ratchet action for increased
leverage.
• Bypass the ratchet for fast,
direct bending on smaller
sizes.
• Heavy-duty welded construction for long, reliable service.
• Built-in bending degree indicator and easy-to-use bending
charts for accurate, consistent bends.
Part No. Description
1800 Mechanical bender for ½", ¾", 1" IMC & Rigid conduit
1801 Mechanical bender for 1¼", 1½" IMC & Rigid conduit
1818 Mechanical Bender for EMT, IMC, Rigid and
Aluminum Conduit
• Bends a wide variety of types and sizes of conduit.
• Durable ratchet mechanism for easy bending.
• Bypass ratchet for fast direct bending of smaller sizes.
• Built-in bending degree indicator and easy-to-use bending charts for accurate, consistent bends.
• All shoes and accessories can be mounted to the frame unit and secured with chain & lock
• Heavy-duty undercarriage with wheels.
Part No. Description
1818 Mechanical bender for ¾" - 2" EMT Conduit, ½" - 1¼" IMC conduit and ½" - 1½"
Rigid and aluminum conduit
SITE-RITE®
Aluminum Hand Benders
• Heat treated aluminum construction. Lifetime Limited Warranty.
• Patented sight indicator is a key feature for bending angles fast
and easy.
• Non-slip contoured foot pedal for added leverage.
• Cast-in markings for stub-ups, saddle bends, back-to-back
bends and head-up or down bending.
• Cast-in offset multipliers.
Capacity Head & Handle Head Only Handle Only
½" EMT 840AH 840A 845H
¾" EMT
½" Rigid 841AH 841A 845H
1" EMT
¾" Rigid, IMC 842AH 842A 846H
1¼" EMT
1" Rigid, IMC N/A 843F 846-1¼
t Head & Handle Complete p Head Only
362 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ELECTRIC BENDERS
853 Quad Bender™
• Four-in-one shoe handles
1", 1¼", 1½", 2" EMT, IMC
and Rigid steel and alumi-
num conduit.
• No-shoe-change-out design
means excellent portability
at a competitive price.
• Quickly remove shoe and
bridge to reduce weight for
easy handling.
• Squeeze adjustment to
compensate for conduit
variations. Smooth, wrinkle-free bends.
Part No. Description
853 Quad Bender for 1"-2" EMT,IMC and Rigid steel
and aluminum conduit
37279 Optional 40 mil PVC Shoe Group (only)
853
854 Quad Bender™
• Bends ½" to 2" EMT,
IMC and Rigid and Rigid
Aluminum conduit without
any shoe changes. No
loose parts to get lost.
• Two operating positions,
table-top and upright.
• Remote pendant switch
and bending charts for
easy, accurate bends.
• Squeeze adjustment to
compensate for variations
in EMT conduit.
• Adjustable leveler pads.
• Excellent portability. Con-
venient lifting eyes.
• Optional shoes available to bend PVC coated steel conduit.
Part No. Description
854 Quad Bender for 1"-2" EMT,IMC, rigid and
Rigid aluminum conduit
01700 Optional PVC Shoe unit ½" - 2"
854
555® Deluxe Electric
Conduit Bender for ½"
thru 2" Conduit & Pipe
• Features unique electrical
controls that reduce the
inrush current to the relays
to minimize contact arcing
for longer-life.
• Fast and easy way to bend
up through 2" conduit.
• Remote pendant control and
bending data charts for easy
and accurate bending.
• Simple setup and easy
operation for correct and
consistent bends.
• Portable, includes handle,
excellent balance and heavy duty, urethane-filled puncture-proof
pneumatic wheels.
• Will make 180° one shot bends in ½" through 2" rigid conduit.
Part No. Description
555 Deluxe Electric Bender power unit without
bending accessories.
555R Deluxe Electric Bender with Shoe Group for ½"
through 2" Rigid & ½" through 1¼" IMC conduit
and pipe, includes 28007 - ½" - 2" Rigid Shoe
Group.
555E Deluxe Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" -
2" EMT Shoe Group.
555I Deluxe Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 -
1½" - 2" IMC Shoe Group.
37279 Optional 40 mil PVC Shoe Group (only)
555
855
Smart Quad Bender™
• Two operating positions,
table-top and upright.
• Squeeze adjustment to
compensate for variations
in EMT conduit.
• Optional shoes available
to bend PVC coated steel
conduit.
• Adjustable leveler pads.
• Excellent portability.
Convenient lifting eyes.
• Weather resistant con-
struction.
• Intelligent pendant controls: Standard (included), digital readout
and programmable bend angles for accurate repeat bends. De-
luxe (optional) interactive control – calculates complete layout
measurements for various types of bends.
• Bends ½" to 2" EMT, IMC and Rigid and Rigid Aluminum conduit
without any shoe changes. No loose parts to get lost.
Part No. Description
855 Smart Quad Bender for 1"-2" EMT,IMC and Rigid
conduit (includes Standard Pendant
38650 Deluxe Pendant for older bender w/serial code ZW
01711 Deluxe Pendant for current bender w/serial code ABL
855
363
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ELECTRIC BENDERS
555® Classic Electric Conduit Bender for ½" thru 2"
Conduit & Pipe
• Features simple relay controls for easy field repairs and com-
pact handle design to prevent interference with conduit when
bending.
• Fast and easy way to bend up through 2" conduit.
• Remote pendant control and bending data charts for easy and
accurate bending.
• Simple setup and easy operation for correct and consistent
bends.
• Portable, excellent balance and heavy duty wheels.
Part No. Description
555 Classic Electric Bender power unit without
bending accessories.
555R Classic Electric Bender with Shoe Group for ½"
through 2" Rigid and ½" through 1¼" IMC con-
duit and pipe, includes 28007 - ½" - 2" Rigid
Shoe Group.
555E Classic Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" -
2" EMT Shoe Group.
555I Classic Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 -
1½" - 2" IMC Shoe Group.
37279 Optional 40 mil PVC Shoe Group (only)
Accessory Shoe Groups for 555® Electric Benders
Part No. Description
23802 ½" through 2" EMT Shoe Group consisting of
the following (one each):
17944 ½" through 1¼" EMT Bending Shoe
17986 ½" through 1¼" Support Roller
23499 1½" EMT Bending Shoe
23505 2" EMT Bending Shoe
23541 1½" through 2" Roller Support Unit
1723 Metal Storage Box
23816 1½" and 2" EMT Shoe Group consisting of the
following (one each):
23499 1½" EMT Bending Shoe
23505 2" EMT Bending Shoe
23541 1½" through 2" Roller Support Unit
26330 1½" and 2" IMC Shoe Group consisting of the
following (one each):
25263 1½" IMC Bending Shoe
25268 2" IMC Bending Shoe
25273 1½" through 2" Roller Support Unit
1723 Metal Storage Box
28007 ½" through 2" Rigid Shoe Group consisting of
the following (one each):
00571 ½" through 1¼" Rigid/IMC Bending Shoe
00936 ½" through 1¼" Support Roller
17937 1½" through 2" Rigid Bending Shoe
17984 1½" through 2" Roller Support Unit
37279 40 Mil PVC Coated Rigid ½" through 2" Shoe
Group consisting of the following (one each):
00946 ½" through 1¼" Roller Support
00573 ½" through 1¼" Shoe
37281 1½" and 2" Shoe
37282 1½" through 2" Roller Support Unit
1723 Metal Box
555® Classic Electric Conduit Bender for ½" thru 2"
Conduit & Pipe
• Features simple relay controls for easy field repairs and com-
pact handle design to prevent interference with conduit when
bending.
• Fast and easy way to bend up through 2" conduit.
• Remote pendant control and bending data charts for easy and
accurate bending.
• Simple setup and easy operation for correct and consistent
bends.
• Portable, excellent balance and heavy duty wheels.
Part No. Description
555 Classic Electric Bender power unit without
bending accessories.
555R Classic Electric Bender with Shoe Group for ½"
through 2" Rigid and ½" through 1¼" IMC con-
duit and pipe, includes 28007 - ½" - 2" Rigid
Shoe Group.
555E Classic Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" -
2" EMT Shoe Group.
555I Classic Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 -
1½" - 2" IMC Shoe Group.
37279 Optional 40 mil PVC Shoe Group (only)
555® Classic Electric
Conduit Bender for ½"
thru 2" Conduit & Pipe
• Features simple relay con-
trols for easy field repairs
and compact handle design
to prevent interference with
conduit when bending.
• Fast and easy way to bend
up through 2" conduit.
• Remote pendant control and
bending data charts for easy
and accurate bending.
• Simple setup and easy
operation for correct and
consistent bends.
• Portable, excellent balance
and heavy duty wheels.
Part No. Description
555C Classic Electric Bender power unit without
bending accessories.
555R Classic Electric Bender with Shoe Group for ½"
through 2" Rigid & ½" through 1¼" IMC conduit
and pipe, includes 28007 - ½" - 2" Rigid Shoe
Group.
555E Classic Electric Bender with Shoe Group for ½"
through 2" EMT conduit, includes 23802 - ½" -
2" EMT Shoe Group.
555I Classic Electric Bender with Shoe Group for
1½" through 2" IMC conduit, includes 26330 -
1½" - 2" IMC Shoe Group.
37279 Optional 40 mil PVC Shoe Group (only)
555
884 / 885
Electrical Tools - Hydraulic Benders
Shown with P/N 1807
Bending Degree Indicator
884 / 885 Rigid Conduit Benders for One-Shot 90°'s in 1¼" - 5"
• Strong, lightweight, portable, pin-assembled aluminum components.
• Easy-to-use ram travel scale and charts for accurate bends.
• Both 884 and 885 bend one-shot 90° in 1¼" - 4" rigid conduit. 885 includes 5" Segment
Rigid Conduit Bender.
• Optional shoes available to bend PVC-coated rigid conduit.
• Optional 1802 Bending Table available for easier operation.
Specifications
Capacity: 884: 1¼" - 4" rigid conduit
884PVC: 1¼" - 4" 40 mil coated rigid conduit
885: 1¼" - 5" rigid conduit
Power source: 980: 120VAC Electric Hydraulic Pump
980-22PS: 220VAC Electric Hydraulic Pump
Part No. Description
884 1¼" - 4" Rigid Conduit Bender w/o hydralic pump
884E980 1¼" - 4" Rigid Conduit Bender w/ 980 hydralic pump
884PVC 1¼" , 1½", 2", 3" & 4" PVC-coated Rigid Conduit Bender w/o hydraulic pump
885 1¼" - 4" One-Shot & 5" Segment Rigid Conduit Bender w/o hydraulic pump
885E980 1¼" - 4" One-Shot & 5" Segment Rigid Conduit Bender w/ 980 hydraulic pump
364 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ELECTRIC BENDERS / ACCESSORIES
881 Cam Trak® Bender
For 2½" to 4" EMT, IMC & Rigid
• One bender for EMT, IMC and Rigid.
• Fast and easy setup on the jobsite.
• True One-Shot 90° bends with CT models for quick accurate bends
• Steel reinforced follow bars for long life.
• Bend one 90° in 4" Rigid conduit in 95 seconds.
• Optional 1813 Bending table and accessories for easier operation.
Specifications
Capacity: 2½" - 4" EMT, IMC and Rigid
Power source: 980: 120VAC Electric Hydraulic Pump
980-22PS: 220VAC Electric Hydraulic Pump
Part No. Description
881CT Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3", 3½" & 4" EMT, IMC & Rigid conduit, w/o
hydraulic pump
881CT-E980 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3", 3½" & 4" EMT, IMC & Rigid conduit,
w/980 hydraulic pump
881CTD Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3" & 4" EMT, IMC & Rigid conduit,
w/o hydraulic pump
881CTD-E980 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½", 3" & 4" EMT, IMC & Rigid conduit,
w/980 hydraulic pump
881 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½" & 3", Two-Shot 90° Bends in 3½" & 4" EMT,
IMC and Rigid conduit, w/o hydraulic pump
881-E980 Cam-Trak® Conduit Bender for One-Shot 90° Bends in 2½" & 3", Two-Shot 90° Bends in 3½" & 4"
EMT, IMC & Rigid conduit, w/980 hydraulic pump
881 Basic Conduit Bender, w/o shoe groups or hydraulic pump
1802
Bending Table for 884 & 885 Benders
• Make bending easier, faster and more accurate.
• Insert conduit to be bent in chain vise, tighten. Turn handle to
move the chain vise and position conduit for bending.
• Use the Bending Degree Protractor and the chain vise to advance
conduit while making segment and other multi-shot large sweep
bends.
• Includes Bending Degree Protactor and metal storage box.
• Includes pipe support pins for 884 & 885 Benders
Part No. Description
1802 Bending Table
Typical setup
shown
with bender
1802
882
Flip-Top® Benders
for 1¼" - 2"
EMT, IMC & Rigid
• Choose 882 for EMT or
882CB models for EMT, IMC and Rigid Conduit.
• Simple, accurate & easy to use.
Part No. Description
882 Flip-Top Bender for 1¼", 1½" and 2" EMT Con-
duit, w/o hydraulic pump
882CB Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/o hydraulic pump
882CB-H755 Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/755 Hand
Hydraulic Pump
882CB-E975 Flip-Top Bender with shoes for 1¼", 1½" and
2" EMT, IMC & Rigid Conduit, w/975 Electric
Hydraulic Pump
882-H755 Flip-Top Bender for 1¼", 1½" and 2" EMT Conduit,
w/755 Hand Hydraulic Pump
882
1813 BENDING TABLE
1813 Bending Table for 881 Bender,
converts 881 into bench production
style machine
881A Converts 884 or 885 to an 881
SHOE GROUPS
27554 2½" One-Shot 90° EMT, IMC Rigid Shoe Group
27555 3" One-Shot 90° EMT, IMC Rigid Shoe Group
31281 3½" One-Shot 90° EMT, IMC Rigid Shoe Group
27556 3½" 45° EMT, IMC Rigid Shoe Group
31274 4" One-Shot 90° EMT, IMC Rigid Shoe Group
` 27556 4" 45° EMT, IMC Rigid Shoe Group
Shown with OPTIONAL
1813 Bending Table
881
1813
365
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HYDRAULIC PUMPS
Hydraulic Hose Units
• For use with Greenlee hydraulic pumps. • Equipped with couplers and dust caps.
Part No. Description
05850 10' x ¼" hose with (1) 3⁄8" male
coupler & (1) 3⁄8" female coupler
05851 10' x ¼" non-conductive
hose with (1) 3⁄8" male coupler
& (1) 3⁄8" female coupler
05851 25' x ¼" non-conductive
hose with (1) 3⁄8" male coupler
& (1) 3⁄8" female coupler
11289 6' x 3⁄8" hose with (2) 3⁄8" male
couplers
37729 10' x ¼" hose with (2) ¼"
male couplers
Part No. Description
17707 10' x ¼" hose with (1) 3⁄8"
male coupler & (1) ¼" male
coupler
37728 6' x ¼" hose with (1) ¼"
male coupler & (1) ¼" NPT
thread
38316 3' x ¼" hose with (1) ¼"
male coupler & (1) ¼" NPT
swivel threaded fitting
06302 3' x ¼" hose with (1) ¼" NPT
male threaded fitting & (1) ¼"
NPT swivel threaded fitting
960 Electric Hydraulic Pump
• Usable oil volume: 6¼ qts.
• For use with all Greenlee benders.
• Solid-state controls for increased reliability.
• Low pressure for fast ram advance, aou-
tomatically changes to low-volume, high
pressure.
• Pendant control for advance, valve on pump
for release.
• Use with single hose hydraulic systems
with spring-return rams.
• Equipped with four swivel casters.
Specifications
Operation: 120VAC; 1½ hp
Capacity: 10,000 psi (700 bar);
300 inch per minute rapid
advance; 54 inch per minute
@ full pressure
Dimensions: 12" L x 10¾" W x 225⁄16" H
Part No. Description
960 SAPS Electric Hydraulic Pump
960
980 Electric Hydraulic Pump
• For use with all Greenlee benders.
• Handy pendant advance control on 980 &
980-22PS. The 980-22FPS has a foot-control
switch.
• Automatic or manual ram-return selector
valve provides more control from the pen-
dant switch.
• Molded enclosure protects pump, motor
and circuitry in tough working environments.
• Use with single hose hydraulic systems with
spring-return rams.
Specifications
Operation: 980 -120VAC; 1½ hp.
980-22PS - 2020VAC; 1½
hp.
Capacity: 10,000 psi (700 bar); 250 in./
minute rapid advance; 18 in./
minute @ full pressure
Dimensions: 12" L x 12" W x 17½" H
Part No. Description
980 Electric Hydraulic Pump w/
pendant
980-22PS Electric Hydraulic Pump
w/pendant switch
980-22FPS Electric Hydraulic Pump w/
foot switch
980
755
High Pressure Hydraulic Hand Pump
• Portable and powerful, for use with
Greenlee Benders.
• Versatile, operates in any position.
• Steel pump body and rubber hand grip.
• Wide base for stability.
• Mounting holes for permanent positioning.
• Includes 3/8" female hydraulic connector
and dust cap.
Specifications
Operation: Manual - Hand
Capacity: 10,000 psi (700 bar);
0.161 in. per stroke
Dimensions: 28½" L x 7" W x 6" H
Part No. Description
755 High Pressure Hydraulic
Hand Pump
755
975 Electric Hydraulic Pump
• For use with Greenlee 2" capacity benders.
• Automatic or manual ram-return selector
valve provides more control from the
pendant switch.
• Molded enclosure protects pump, motor
and circuitry in tough working environments.
• Use with single hose hydraulic systems
with spring-return rams.
Specifications
Operation: 120VAC; ½ hp
Capacity: 10,000 psi (700 bar);
250 inch per minute rapid
advance; 18 inch per minute
@ full pressure
Dimensions: 12" L x 10" W x 15½" H
Part No. Description
975 Electric Hydraulic Pump
975
366 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PVC ELECTRIC HEATERS / BLANKET
860 PVC Heating Blanket
• Make bends, offsets or saddles in PVC
fast and easy.
• Easy to use; wrap blanket around PVC
secure with hook & loop strap.
• Built-in stiffeners help keep the blanket
tight to the PVC surface. Remove blanket
and form bend by hand.
• Controlled, even heating for uniform
bending.
• Temperature over 300° F.
• All schedules
Specifications 860-
1½ 3 4
Capacity: Up to 1½" 2"-3" 3½"-4"
Power: 120VAC 120VAC 120VAC
Size: 13"x 8¼" 30"x 13¼" 38"x 16¼"
Weight: 1.7 lbs, 3.3 lbs. 4.9 lbs.
Wattage 200 800 1300
Part No. Description
860-1-½ PVC Heating Blanket for up
to 1½"
860-3 PVC Heating Blanket for 2"-3".
860-4 PVC Heating Blanket for 3½"-4".
PVC Plug Set
• Use with PVC
Heating Blan-
kets or Electric
Heaters to plug
the ends of
the PVC being
heated. The
trapped air will
keep the PVC
from collapsing
while forming
the bend.
• Use on Schedule 40 and 80 PVC.
• Set includes (2) each of 2", 2½", 3" and 4"
plugs with plastic carrying case.
• 5" and 6" plugs available seperately.
Part No. Description
859-4 PVC Plug Set, incl: (2) each of
2", 2½", 3" and 4" plugs with
plastic carrying case
30980 PVC Plug, 5"
30981 PVC Plug, 6".
860
Mini Magnetic Bubble Level
• Professional grade level with bending
offset aid.
• Mini torpedo design with “no-dog” at-
tachment for bending.
• Three rare earth magnets for superior
holding strength.
• Four vial design - 0°, 90°, 45° and 30°.
• Machined from aluminum alloy and anod-
ized to aircraft specifications.
• V-groove on top of level for easy view of
vials.
Part No. Description
L77 Mini Magnetic Bubble Level
Protractor with
Magnetic Base
Part No. Description
1895 Protractor with Magnetic Base
Electric PVC Heaters/Benders
• For ½" - 2", ½" - 4" and ½" - 6" PVC, all schedules.
• Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and form
bend.
• Heavy duty, insulated metal wall with reflective interior for fast, even heating..
• Full length doors for easy PVC loading and removal. Model 847 & 848 feature piano
hinged double-doors to allow heating of shorter lengths with one door open.
• Models 851, 847 & 848 feature wheels for easy mobility.
• Model 848 features motorized PVC rotation.
• Replacement Calrod Heating Elements are available.
Specifications
849 851 847 848
Capacity: 1½" - 2" 1½" - 4" 1½" - 6 1½" - 6"
Power: 120VAC 20 Amp 120VAC 20 Amp 120VAC 30 Amp 120VAC 30 Amp
Size: — 52" 71" 71"
Weight: 15 lbs, 53 lbs. 78 lbs. 78 lbs.
Wattage — 2300 6600 6600
Part No. Description
849 Electric PVC Heater for 1½" - 2"
851 Electric PVC Heater for 1½" - 4"
847 Electric PVC Heater for 1½" - 6"
848 Electric PVC Heater for 1½" - 6", with motorized PVC rotation.
31092 Motorized rotation kit for Model 847
857 PVC roller support (optional)
Hydraulic Oil
• Greenlee-approved
hydraulic oil.
• Specially com-
pounded for use with
Greenlee hydraulic
equipment.
Part No. Description
4016GB Hydraulic Oil -1 Gallon
4017GB Hydraulic Oil -1 Quart
857
847
848
851
849
367
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CURRENT TOOLS
77 Series Electric Conduit Bender for ½" thru 2" Conduit & Pipe
• Powerful motor will make 180° bends on up to 2” rigid conduit
• Rugged and dependable electrical system
• Easy to maintain
• Handle pivots to allow for dogleg bends
• Shoes and roller support assemblies will fit Greenlee’s® 555® electric bender*
• Two year warranty
Specifications
Power Source: 120 vac; 20 amp
Capacity: 77RIG:1/2’’ to 2” Rigid conduit and 1/2’’ to 1 1/4” IMC conduit
77EMT: 1/2’’ to 2” EMT conduit
77IMC: 1 1/2’’ to 2” IMC conduit
77PVC: 1/2’’ to 2” 40 mil PVC coated conduit
Dimensions: 24.5" D x 29.5" W x 42" H
Part No. Description
77 Electric Bender Power Source only (no shoes)
77RIG Electric Bender with No. 700R Rigid shoes & accessories
77EMT Electric Bender with No. 700E EMT shoes & accessories
77IMC Electric Bender with No. 700I IMC shoes & accessories
77PVC Electric Bender with No. 700P 40 mil PVC coated conduit bending
shoes & accessories
77COM Electric Bender with No. 700E, No. 700I, & 700R 660 shoes & acces-
sories (EMT, IMC & Rigid
BENDING
SHOE GROUPS
700R 1/2" - 2" Rigid Shoe Group
Item
#
Cat.
No. Description Wt.
(lbs.)
12-1301 1/2”- 1-1/4” Rigid and IMC bending shoe 23
22-1001 1/2”- 1-1/4” Rigid and IMC support roller 8
32-1401 1-1/2” and 2” Rigid bending shoe 37
42-1002 1-1/2” and 2” Rigid support roller 6
700E 1/2" - 2" EMT Shoe Group
Item # Cat.
No. Description Wt.
(lbs.)
12-1501 1/2” - 1-1/4” EMT bending shoe 2
22-1003 1/2” - 1-1/4” EMT support unit 6
32-1601 1-1/2” EMT bending shoe 23
42-1701 2” EMT bending shoe 31
52-1100 1-1/2” - 2” EMT support roller unit 40
not shown 8-0501 Metal storage box 36
700I 1-1/2" - 2" IMC Shoe Group
Item # Cat.
No. Description Wt.
(lbs.)
12-1801 1-1/2” IMC bending shoe 22
22-1901 2” IMC bending shoe 29
32-1200 1-1/2” & 2” IMC support roller unit 40
not shown 8-0501 Metal storage box 36
700P 1/2" - 2" 40mil PVC Coated Rigid Shoe Group
Item
#
Cat.
No. Description Wt.
(lbs.)
12-1501 1/2” - 1-1/4” EMT bending shoe 2
12-2001 1/2”- 1-1/4” PVC coated rigid bending shoe 23
22-1004 1/2”- 1-1/4” PVC coated rigid support roller 8
32-2101 1-1/2” & 2” PVC coated rigid bending shoe 37
42-1005 1-1/2” & 2” PVC coated rigid support roller 6
not
shown 8-0501 Metal storage box 36
368 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CURRENT TOOLS PULLERS / KNOCKOUT SETS
Piece Maker™ 1/2" - 2"
Hydraulic Knockout Set
• Designed to split the slug in two
pieces for easy removal
• Requires less force than conven-
tional punches
• Fast set-up
• High-strength steel punches and
dies for long life
• Reduces punch time versus
manual or ratchet methods
• Unique hand pump design with
heavy duty ram
• Designed to punch a maximum of
10 gauge ( .134” ) mild steel
• Compare with Greenlee® Slug-
Buster® Models 7306SB and
7310SB*
Part No. Description
152PM 1/2" – 2" Piece Maker™ Hydraulic Knockout Set
2-1/2" - 4"
Knockout Punch
and Die Set
• 4 point punch design
for easy slug removal
• Fast set-up
• High strength steel
punches and dies for
long life
• Reduces punch time
versus manual or
ratchet method
• Designed to punch a
maximum of 10 gauge ( .134” ) mild steel
• Compare with Greenlee® Model 7304
Part No. Description
156 2-1/2" – 4" Knockout Punch and Die Set
Heavy Duty Piece
Maker™ SS
Knockout Sets for
Stainless Steel
• Punch holes in 16
gauge to 10 gauge
stainless steel
• Designed to split the
slug into two pieces for
easy removal
• Punches are manufac-
tured from tool steel
for high strength and
long life
• Requires less force than conventional punches
• Compare with Greenlee® Slug-Splitter® Models 7307 and 7506
Part No. Description
161SS 1/2" – 2" HD Piece Maker™ SS Hydraulic Knockout
Set for Stainless Steel
Mantis™ Mobile Cable Pulling Package
• Excellent Mobility
• Easy set-up
• Transport without complete disassembly
• Pulls up to 20’ extra cable
• 8,000# capacity
• Fits through 32” doorway
• Will fit Greenlee® Model 6001 Super Tugger® and 640 Tugger®
Part No. Description
8890A Mantis™ Mobile Cable Pulling Package w/Model 88
Cable Puller
High Speed Cable Puller
• Rolling base for easy mobility
around jobsite
• Folds for compact transport and
storage
• Quick release conduit couplings
• Integral heavy duty two speed motor
• Permanently lubricated vent free
gearbox
• Integral foot switch
• Lightweight – Less than 70 lbs.
• 3,000 lb. pulling force
• Complete system – no extra parts
to purchase
• Compare to Greenlee® Model #UT2
Part No. Description
33 High Speed Cable Puller - 3000 lb. Capacity
370 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PUNCH & DRIVER SETS
7235BB Slug-Buster®
Manual Knockout Kit
• ½" to 1¼" Conduit size.
• Includes punches and dies for
the following sizes: ½", ¾" 1"
and 1¼".
• Rugged plastic carrying case.
Part No. Description
7235BB Slug-Buster® Kit
737BB / 7235BB
Slug-Buster® Manual
Knockout Kit
• 1½" and 2" Conduit size.
• Includes punches and dies for
the following sizes:1½" and 2".
• Available in either standard or
Slug Buster® style
• Rugged plastic carrying case.
Part No. Description
7235BB Slug-Buster® Kit
737BB Standard Kit
7304 Manual
Knockout Kit
• 2½" through 4" Conduit size.
• Includes punches and dies for
the following sizes: 2½", 3",
3½" and 4".
• Rugged plastic carrying case.
Part No. Description
7304 Standard Kit
7238SB Slug-Buster®
Manual Knockout Kit
with Ratchet Wrench
• ½" to 2" Conduit size.
• Includes punches and dies for
the following sizes: ½", ¾" 1",
1¼". 1½" and 2".
• Hex ratchet wrench allows use
with both 3/8" and ¾" draw
studs.
• Rugged plastic carrying case.
Part No. Description
7238SB Slug-Buster® Kit w/
Ratchet wrench
Ram & Hand Pump Hydraulic Driver Kits
• Fast, easy and simple to operate.
• Compact design for use on construction sites and maintenance jobs.
• Punches 10X faster than wrench method.
• Can be used with most standard round Slug-buster® and Slug-
Splitter® punches. (Not ½", 9/16" or 5/8") Can be used with non-
round punches. (Adapter may be required)
• Powerful 11-ton hydraulic ram with 3' hose.
Part No. Description
7646 Driver with hand pump, draw studs, spacer &
plastic case.
7306SB Driver, hand pump, ½" through 2" Slug-Buster®
conduit size punches, dies and draw studs,
adapter, spacers, Kwik Stepper® Step bit &
plastic case.
7310SB Driver, hand pump, Slug-Buster® conduit size
punches, dies & draw studs, ½" through 2" and
2½" through 4" standard conduit size punches, dies
& draw studs, adapter, spacers, Kwik Stepper®
Step bit & steel case.
Quick Draw® Hydraulic
Punch Driver Kits
• Compact, lightweight design
for portability and fast, easy
one-person operation.
• 8 tons of hydraulic force for
punching up to 10 ga. steel.
• Quick Draw® - perfect for fast,
straight-on front panel punching.
• Quick Draw® Flex allows
unlimited driver orientation to
simplify access to work area.
• Quick Draw® 90° right angle
driver head rotates over 180° for maximum flexibility in tight areas.
Part No. Description
7804SB Quick Draw® Driver, includes: 2 draw studs, 1
adapter, 1 spacer & case.
7806SB Quick Draw® Driver Kit, includes: Quick Draw®
driver, ½" through 2" Slug-Buster® conduit size
punches & dies, 2 draw studs, 1 adapter, 1
spacer & case.
7706SB Quick Draw® Flex Driver Kit, includes: Quick
Draw® Flex driver, ½" through 2" Slug-Buster®
conduit size punches & dies, 2 draw studs, 1
adapter, 1 spacer & case.
7904SB Quick Draw® 90° Driver, includes: 2 draw
studs, 1 adapter, 1 spacer & case.
7906SB Quick Draw® Driver 90° Kit, includes: Quick
Draw® 90° driver, ½" through 2" Slug-Buster®
conduit size punches & dies, 2 draw studs, 1
adapter, 1 spacer & case.
7310SB
SLUGBUSTER®
371
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
KNOCKOUT PUNCHES AND PUMPS
Slug Buster® Knockout Punches
• Easily punch mild steel through 10 gauge, aluminum, fiberglass
or plastic.
• Unique punch profile also splits slugs for easier removal.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Uses standard Greenlee dies and draw studs.
• Available in sizes up through 2.52".
Conduit/ Actual Complete Punch Die Manual Draw
Pipe Hole Punch Unit Only Only Stud Only
Size Size P/N P/N P/N P/N
½" 7/8" 7211BB-½ 721-½ 14722 00042
¾" 1.115" 7211BB-¾ 721-¾ 124AV 249AVBB
1" 1.362" 7211BB-1 721-1 126AV 249AVBB
1¼" 1.701" 7211BB-1-¼ 721-1-¼ 128AV 249AVBB
1`½ 1.951" 7211BB-1-½ 721-1-½ 440AV 304AVBB
2" 23/8" 7211BB-2 721-2 442AV 304AVBB
Standard Knockout Punches
• Easily punch mild steel through 10 gauge, aluminum, fiberglass or
plastic.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Makes clean, fast and accurate holes.
• Available in sizes up through 5.675"
• Round Standard Metal Punch Units are complete units consisting of
punch, die & draw stud.
Conduit/ Actual Complete Punch Die Manual Draw
Pipe Hole Punch Unit Only Only Stud Only
Size Size P/N P/N P/N P/N
½" 7/8" 71BB 121AV 14722 00042
¾" 1.115" 72BB 123AV 124AV 249AVBB
1" 1.362" 73BB 125AV 126AV 249AVBB
1¼" 111/16" 74BB 127AV 128AV 249AVBB
1`½ 115/16" 75BB 439AV 440AV 304AVBB
2" 23/8" 76BB 441AV 442AV 304AVBB
2`½ 27/8" 738BB 1429AV 1430AV 1434AV
3" 3½" 739BB 1431AV 1432AV 1434AV
3`½ 4" 741BB 2982AV 2981AV 3026AV
4" 4½" 742BB 2984AV 2983AV 3026AV
5 55/8" 743BB 5135AV 5136AV 3026AV
Slug-Splitter SC™ Ram & Hand Pump Hydraulic Driver Kit
• Designed for Stainless Steel applications
• Features Slug-Splitter SC (Self Centering) Knockout Punches with capacity up through
10 gauge stainless steel.
• Self-centering punch aligns itself on pilot hole.
• Fast, easy and simple to operate.
• Compact design makes this the perfect tool for use on construction sites and mainte-
nance jobs.
• Will also drive 751 Cable Cutter head
• Powerful 11 ton hydraulic ram with 3 foot hose.
Part No. Description
7506 ½" through 2" Conduit Size Slug-Splitter SC Knockout Punch Kit.
7506
Hydraulic Pumps
Hand Pump
• Lightweight and portable for use with
Greenlee Punch Drivers.
• Versatile , operates in any position,
single speed.
• Mounting holes for easy, permanent
mounting.
Foot Pump
• Leaves both hands to position and hold
the working tool.
• Foot activated release lever.
• Angled base bar keeps unit upright and
stable.
• Includes female coupler with dust cap.
Specifications
Capacity: 6,500 psi (446 bar),
.117 in. per stroke
Part No. Description
1725 Hydraulic Foot Pump
767 Hydraulic Hand Pump
1725
767
372 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DRAW STUDS FOR KNOCKOUT PUNCHES
3026AV — 1-1/8" x 7-1/2"
Replacement Draw Studs for Manual Drivers Selection Guide
• Refer to the full scale pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
1675AV — 1/4" x 1-3/8"
249AVBB — 3/4" x 2-1/8"
340AVBB — 3/4" x 2-15/16"
00042 — 3/8" x 2-5/8"
1434AV — 3/4" x 5-1/2"
373
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DRAW STUDS FOR KNOCKOUT PUNCHES
Replacement Draw Studs for Hydraulic Drivers Selection Guide
• Refer to the full scale pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
Replacement Draw Studs for Ratchet Drivers
Selection Guide
12097 — 3/8" x 3-1/2"
249AVBB — 3/4" x 2-1/8"
12099 — 3/4" x 4-3/4"
2113B — 3/4" x 5-3/8"
29452 — 3/4" x 5-1/2"
29451 — 7/16" x 4-1/4"
1557AA — 11/8" x 3"
33967 — 3/4" x 17/8"
1614SS — 3/8" x 2-13/16"
374 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STUD PUNCHES / ACCESSORIES
Manual Stud Punches
• Punch up through 20 gauge steel studs
in one stroke.
• Rolls edge over for smooth installation of
armoured cable.
• Contoured hande design gives operator
better leverage and makes it possible to
punch in tight places.
• Automatically centers holes on standard
studs.
Part No. Description
724 1¼" Diameter Stud Punch
Structural Stud Punch
• Punch 16 & 18 gauge structural studs in
5 seconds.
• Punch 200 holes per 12V NiCad battery,
2 batteries included, reducing downtime.
• Punches 1.34 diameter hole in 16 gauge
steel. Use with Greenlee 712A bushings.
• Swivel head rotates 360° for use in tight
corners.
• Lightweight, 9.2 lbs., tool provides
heavy-duty performance.
Part No. Description
ESP710-11 Structural Stud Punch, incl's.
2-batteries, 120V charger.
Bushings for Metal Stud Punches
• Triple lock design holds bushing securely.
• Locks securely into metal studs from 24
gauge to 12 gauge.
• Helps protect wire insulation from sharp
edges of metal studs.
• Makes pulling smooth and easy by pre-
venting hang-ups of cable on raw metal
edges.
Part No. Description
711C Bushings for 7/8" diameter
hole - 100 per pkg.
712A100 Bushings for prepunched
hole or 111/32" diameter hole
- 100 per pkg.
Metal Stud Punches
• Punch up through 20 gauge steel studs
in one stroke.
• Aluminum head provides strength with
minimum weight.
• Contoured hande design gives operator
better leverage and makes it possible to
punch in tight places.
• Self-stripping design eliminates punch
hang-ups.
• Automatically centers holes on standard
studs.
Part No. Description
709 7/8" Diameter Stud Punch
710 111/32" Diameter Stud Punch
121AV Replacement Punch for 709
22286 Replacement Die for 709
24823 Replacement Punch for 710
21297 Replacement Die for 710
Plumber Stud Punch
• Punches 25/8" diameter hole in metal
studs for professional-looking installation
of 2" water, vent and waste pipes.
• 2-speed lever action for fast, easy
punching of 24 to 20 gauge thick metal
studs.
• High strength aluminum alloy frame
provides lightweight, easy handling.
• Lever action punch retraction strips
punch out of metal stud fast and easy.
Part No. Description
713 Plumber Stud Punch
Deburring Tool
• Cleans burrs from both sides of hole in
seconds, saving time and labor.
• Works with any hole size or shape ¾" or
larger, in up to 10 gauge metal.
• Helps protect wire insulation from sharp
edges of metal studs.
• Makes pulling smooth and easy by pre-
venting hang-ups of cable on raw metal
edges.
Part No. Description
11170 Deburring Tool, 3/8" chuck
11180 Replacement Cutter, 3-pack
Before After
Deburring Tool
375
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SpeedFlex™
• Silver-solder joint attaches to any 1/8" x
.060" steel fish tape to provide a a slim
profile that fishes farther and faster.
• High strength, stainless steel cable used
for reliability and long-life.
• Beveled edges on leader reduces pos-
sibilities of hangups.
• Up to (6) #10 wires may be attached to
the large pulling eye.
Part No. Description
439-2 SpeedFlex™
Flex-O-Twist™
• Helps guide 1/8" steel tapes through
sharp bends.
• Thread on end of the fish tape in place of
the swivel ball head.
Part No. Description
439-1 Flex-O-Twist™
Kwik Silver™ Steel Fish Tapes
• Plated fish tape wire is corrosion resistant
and as strong as conventional steel tape.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
• Self-tensioning case for easy tape winding.
• Wide, impact resistant re-winder case
with view ports to ensure tape fit and
restraining strap on inside to hold tape
secure.
Part No. Description
FTS438-65 65' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
FTS438-125 125' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
FTS438-240 240' x 1/8" x 0.060" Kwik
Silver™ Steel Fish Tape in
Winder Case
Silver Streak™ Steel Fish Tapes
• Stainless steel fish tape lasts longer and
rewinds easier. Rust & corrosion-resistant.
• Includes Speed Flex™ leader silver sol-
dered onto the fish tape.
• Self-tensioning case for easy tape winding.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
Part No. Description
FTSS438-100 100 x 1/8" x 0.060" Stainless
Steel Fish Tape w/ case
FTSS438-200 200 x 1/8" x 0.060" Stainless
Steel Fish Tape with case
Nylon Fish Tapes
• Co-extruded, curl-resistant nylon fish tape
fishes equally well in large or small conduit.
• High-impact nylon, one-piece handle for
maximum durability, long-life and easy,
comfortable use.
• Heavy-duty winder case.
• 250 lb. pulling strength.
Part No. Description
FTN536-50 50' x 3/16" diameter Nylon
Fish Tape in Winder Case
FTN536-100 100' x 3/16" diameter Nylon
Fish Tape in Winder Case
Fiberglass Fish Tapes
• Non-conductive fiberglass tape with low
friction coating.
• Unique non-coiling properties enable it to
fish equally well in large or small conduit,
even with existing wire or cable in place.
• Unique lightweight reel for easy positive
feed out and rewind.
• Excellent for installation of telecommu-
nications and data cables in overhead
plenums, above suspended ceilings and
under floors.
• Fastest manual fish tape available.
Intended for fishing only, not recom-
mended for pulling.
Part No. Description
FTF540-50 50' x
0.175
" Fiberglass Fish
Tape in Winder Case
Flexible Fish Tape Leaders
VDV Flat-Steel Fish Tape
• Flat steel tape reaches easily above ceil-
ings, under carpets and through walls to
install wire.
• 25' long, extending your reach.
• Winder case with crank handle for easy
compact storage.
Part No. Description
438-2X VDV Flat-Steel Fish Tape
439-1
439-2
FISH TAPES
376 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Fish LIne
• Strong, lightweight nylon.
• 595 - Center feed for fast
payout without tangling.
Use with Might Mouser®
blow gun.
• 604, 605, 606 and 607
Specially wound to payout
fast from outside without
tangles.
• Mildew-resistant. May
be left in run with wire to
provide a means to add
wire later.
Part No. Description
595 Fish line. Center payout.
Use with Mighty Mouser®
blow gun. 2,150 ft./85 lb.
strength.
604 Fish line. Outside payout.
2,200 ft./85 lb. strength.
605 Fish line. Outside payout.
2,750 ft./45 lb. strength.
606 Fish line. Outside payout.
1,700 ft./72 lb. strength.
607 Fish line. Outside payout.
1,350 ft./90 lb. strength.
Fish Tape Power Winder
• Adapts Greenlee fish tapes to rewinding
with a battery drill.
• Fits all Greenlee Fish tapes sized 100' to
240'.
• Spoke design allows rewinding manually
or with battery power.
• Snaps in and out of fish tapre easily
• Includes 3⁄8" drive hex socket with storage
for adapter molded into Power Winder.
Part No. Description
438PW Fish Tape Power Rewinder
EZ Reach™ Fish Stix
• Fish Stix kit with bullet nose and “J” hook threaded tips,
packaged in clear plastic tube.
• Highly visible green ¼" fiberglass rods provide added rigid-
ity when multiple sections are threaded together.
• 200 lb. minimum pulling strength.
• Includes one 3' Glo-Stix™ section for improved tip visiblity.
Part No. Description
540-24 24' Fish Stix™ - (3) 6' and (2) 3' sections.
CableCaster™
• Significantly speeds up installation of light-
weight communications cable through hard-
to-reach spaces such as suspended ceilings,
rafters and sub-floors.
• 50' range allows for faster installations
with fewer pulls.
• Glow-in-the-dark darts are easy to locate in
dark areas.
• Add flashlight (i.e. Mini-Maglite) for easier
visibility.
Part No. Description
06186 CableCaster™
06259 Replacement Darts - 4 pk.
Poly Line
• Ready-to -use, pre-punched hole in lid with
resealable cap.
• Use directly from the container.
• Resists tangling when dispensing.
• Use to pull rope through conduit.
Part No. Description
430 Poly Line, 6,500', Green Tracer
210 lb capacity
431 Poly Line, 5,200', Yellow Tracer
240 lb. capacity
Conduit Measuring Tapes & Dispenser
• Fish and measure conduit runs in one
operation.
• Permenantly printed measurements every
foot from 0' to 3000'.
• Made from strong waterproof polyester.
• Pay-out dispenser has anti-skid pads,
handle and built-in cutter.
Part No. Description
434 Pay-Out Dispenser for 435
Conduit Measuring Tape.
435 Conduit Measuring Tape;
3/16" x 3000', 130 lbs.
breaking strength
Polyester Measure/Pulling Tapes
• Durable, stretch-resistant tape for easily
pulling and installing wire and fiber optic
cables within PVC and HDPE ducts.
• Factory-lubricated to reduce burn-
through in innerduct.
• Easy-to-read footage markings for quick
and accurate measurements.
• Available in various tensile strengths for
use in any application.
Part No. Description
4435 Polyester Measure/Pulling
Tape; ½" x 3000', 1,250 lbs.
breaking strength
4436 Polyester Measure/Pullin
Tape; 5/8" x 3000', 1,800 lbs.
breaking strength
4436 Polyester Measure/Pulling
Tape; ¾" x 3000', 2,500 lbs.
breaking strength
FISH TAPES AND ACCESSORIES
377
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FISH TAPES AND ACCESSORIES
Li'l Fisher® 390 Power Fishing System
• Blows & vacuums fishline, polyline or measuring tape through conduit runs.
• Durable and compact 5 gallon tank.
• Power unit detaches easily to remove water and/or debris.
• Capacity: ½" - 2" conduit with optional accessory kit (2½" - 4" with optional foam pistons).
Li'l Fisher® 390 Specifications
Weight: 19 lb.
Air Flow: 101.2 cfm
Vacuum Lift: 137.1 inches of water
Power Source: 120VAC ½ H.P.
Part No. Description
390 Li'l Fisher® Power Vacuum/Blower Fishing System. (Includes only unit and
38624 hose)
392 Power Fishing System Accessory Kit: includes (1) Fishline, 85 lb. pulling
strength, 2,150' long; (1 ea.) Piston for ½", ¾", 1", 1¼", 1½", & 2" conduit;
(1) Adapter nozzle for Measuring Tape; (10) ½" Conduit x 150' Line Pkg.;
(5) ¾" Conduit x 300' Line Pkg.; (5) 1" Conduit x 200' Line Pkg.; (1) Accessor
Container Lid; (1) Accessory Container; (1) ½"-1" Cone Adapter; (1) 1¼" -
2½" Cone Adapter.
690 Vacuum/Blower Power Fishing System
• Rugged self-contained unit includes everything you need to blow or vacuum fishline,
polyline or measuring tape through conduit runs.
• Durable tank and accessory storage box are corrosion, chemical & impact resistant
polyethylene.
• Designed for the jobsite; 10' long hose, large heavy-duty wheels & removeable acces-
sory box.
• Large 11 gallon tank makes the 690 excellent for vacuuming debris and water.
• Includes the following: (1) Fishline 85 lb. pulling strength, 2,150' long; (1 ea.) Piston
for ½", ¾", 1", 1¼", 1½", 2", 2½" IMC, Rigid, 2½" EMT, 3" IMC, Rigid, 3" EMT, 3½"
IMC, Rigid, 3½" EMT, 4" IMC, Rigid, 4" EMT conduit; (1) Adapter cone for 1¼ "- 2½"
conduit; (1) Adapter cone for ½" - 1" conduit; (1) Adapter cone for 3 "- 4" conduit; (1)
Adapter nozzle for tape & line; (1) Storage box; (1) Blower & vacuum unit; (1) Tank
with casters; (1) Flexible hose, 1½" x 10'; (1) Outer filter bag; (1) Inner filter bag; (10)
½" Conduit x 150' Line Pkg.; (5) ¾" Conduit x 200' Line Pkg.; (5) ¾" Conduit x 450'
Line Pkg.; (5) 1" Conduit x 200' Line Pkg.; (5) 1" Conduit x 450' Line Pkg.
Model 690 Specifications
Capacity: ½" - 4" conduit. (5" and 6" with optional foam pistons)
Air Flow: 120 cfm
Vacuum Lift: 110 inches of water
Power Source: 120VAC
Weight: 50 lb.
Part No. Description
690 690 Power Vacuum/Blower Fishing System.
591 Portable
Blower Power Fishing System
• Powerful, will blow line or measuring
tape in up to 6" conduit.
• Portable, lightweight blower includes
shoulder strap for easy carrying and
leave operator's hands free.
• Efficient, includes Mighty Mouser® blow
gun for fast, easy line blowing.
• Includes: (1) Mighty Mouser® blow gun;
(1) Fishline 85 lb. pulling strength,
2,150' long; (1 ea.) Piston for ½", ¾", 1",
1¼", 1½", 2", 2½" IMC, Rigid, 2½" EMT,
3" IMC, Rigid, 3" EMT, 3½" IMC, Rigid,
3½" EMT, 4" IMC, Rigid, 4" EMT conduit;
(1) Adapter cone for 1¼ "- 2½" conduit;
(1) Adapter cone for ½" - 1" conduit;
(1) Adapter cone for 3 "- 4" conduit; (1)
Adapter nozzle for tape & line; (1) Storage
box; (1) Blower & vacuum unit; (1) Flexible
hose, 1½" x 1'; (1) Flexible hose, 1½" x
4'; (1) hose clamp; (1) Portable blower;
(10) ½" Conduit x 150' Line Pkg.; (5) ¾"
Conduit x 200' Line Pkg.; (5) ¾" Conduit x
450' Line Pkg.; (5) 1" Conduit x 200' Line
Pkg.; (5) 1" Conduit x 450' Line Pkg.
Portable Blower Specifications
Capacity: ½" - 4" conduit. (5" &
6" with optional foam
pistons)
Power Source: 120VAC 20 Amp
Weight: 34 lb.
Part No. Description
591 Portable Blower Power Fishing
System
16646 Accessory Adapter for 5"
- 6" conduit
Model 690
Model 390
Model 591
378 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
POWER FISHING ACCESSORIES / CABLE PULLERS
Mighty Mouser® Blow Gun Kit
• Compact, self-contained Lexan® thermo-
plastic blow gun holds a 2,150' package
of 85 lb. breaking strength fish line.
• Mighty Mouser® blow gun and accesso-
ries fit into compact sturdy metal case.
• Kit includes all items included with Model
591 Portable Blower Power Fishing System
except Portable Blower & 4' hose
Portable Blower Specifications
Capacity: ½" - 4" conduit. (5"
& 6" with optional
accessories)
Power Source: Use with blower power
fishing systems.
Part No. Description
592 Might Mouser® Blow Gun Kit.
691 Might Mouser® Blow Gun (only)
16646 Accessory adapter for 5" - 6"
conduit.
Conduit Pistons
• Use with power fishing systems to pio-
neer the line through the conduit run.
• Flexible foam body for an air-tight seal.
• Color-coded end disk with embossed
size markings for fast, easy selection.
• Strong steel center rod with loops on
both ends.
• Pistons available for all types and sizes
of conduit ½" through 6".
Part No. Description
S2613 Piston Set. Includes (1 ea.) of
the following: ½", ¾", 1", 1¼",
1½" and 2" EMT, MC, and
Rigid conduit.
34317 Piston Set. Includes (1 ea.) of
the following: 2½", 3", 3½",
and 4" EMT conduit.
Electrical Tools - Cable Pullers
Ultra Tugger® 2 Cable Puller - Rated to 2,000 lbs.
• Easy mobility designed for one person to easily transport, set up and teardown.
• Adjustable, telescoping boom and pivoting elbow adjust to the job.
• Quick latch system attaches to all conduit sizes with no loose parts.
• Right angle sheave keeps operator out of direct line of force.
• Dual diameter capstan provides two pulling speeds.
• Integral motor is specifically designed for cable pulling applications.
• Circuit breaker stops the puller motor if it becomes overloaded.
Ultra Tugger® 2 Specifications
Weight: 67 lb.
Drive Motor: 120 VAC, 50/60 Hz, 12 Amp.
Pulling Speeds: High Speed Capstan: 1,000 lb load.
Low Speed Capstan: from 41 fpm @ No Load to 22 fpm @ 2,000 lb load.
Pulling Force: High Speed Capstan: to 1000 lb. continuous.
Low Speed Capstan: to 2,000 lb. continuous.
Use with: Greenlee 640 & 6001 Cable Pullers.
Load Rating: 6,500 lb.
Part No. Description
UT2 Ultra Tugger® 2 Cable Puller Unit.
24821 Foot switch (optional)
Individual Conduit Pistons
Part No. Conduit Conduit
No. Size Type
608 1/2" All
609 3/4" All
610 1" All
611 1-1/4"" All
612 1-1/2" All
613 2" All
614 2-1/2" IMC, Rigid
621 2-1/2" EMT
615 3" IMC Rigid
622 3" EMC
616 3-1/2" IMC Rigid
646 3-1/2" EMC
617 4" IMC Rigid
623 4" EMC
618 5" All
619 6" All
NEFCO offers a
full line of Rental
Equipment
Call for Details
379
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE PULLERS AND TUGGERS
Ultra Tugger® 5 Cable Puller
Power Unit - Rated 5,000 lbs
• 5,000 lb. pulling force, enough power to
pull most 500 kcmil (MCM) jobs of 500
ft. or less.
• Pull speed range of 9-14 fpm will com-
plete most 500 ft. pulls in 1 hr. or less.
• Wheeled carriage and boom provides
fast setup with no anchors to set or
chains to mount.
• Boom uses 3" rigid steel conduit for easy
length adjustment to pull 10-20 ft. of
cable out of the box fast and easy.
• Greenlee 5,000 lb. and 8,000 lb. Ultra
Tugger® power units are interchangeable
in all Ultra Tugger® puller packages such
as 6503, 6505, 6802, or 6805.
• Use 6501 Ultra Tugger® 5,000 lb. capac-
ity cable puller power unit with current
6805 Ultra Tugger® wheeled carriage
and boom to pull cable faster.
Ultra Tugger® 5 Specifications
Weight: 84 lb. (Power Unit only)
Dimensions: Length: 11.5"
Width: 26"
Height: 6.75"
Drive Motor: 1½ hp.
Power Source: 120V 20A
Pulling Force: Maximum: 5,000 lb.
Continuous: 4,000 lb.
Pulling Speed: No load – 14.5 fpm;
@ 4,000 lbs. – 11.0 fpm;
@ 5,000 lbs. – 9.5 fpm
Required Rope: 7⁄8" dia. Double-Braided
Polyester Composite;
Rated @ 32,000 lbs.
Part No. Description
15000 Ultra Tugger® 5 Cable Puller
Power Unit (only) with stan-
dard force gauge.
6501 Ultra Tugger® 5 Cabl
Puller Power Unit includes
standard force gauge, chai
mount & vise chains.
6501
Ultra Tugger® 8 Cable Puller
Power Unit - Rated 8,000 lbs.
• 8,000 lb. pulling force.
• Versi-Boom System allows versatile and
fast setups and pull 10' or 20' of extra
cable easily.
• Wheeled carriage and boom provides
fast setup with no anchors to set or
chains to mount.
• Boom uses 3" rigid steel conduit
• Greenlee 5,000 lb. and 8,000 lb. Ultra
Tugger® power units are interchangeable
in all Ultra Tugger® puller packages such
as 6503, 6505, 6802, or 6805.
• Lightweight, portable.
• Optional deluxe force gauge.
Ultra Tugger® 8 Specifications
Weight: 86 lb. (Power Unit only)
Dimensions: Length: 11.5"
Width: 26"
Height: 8.5"
Drive Motor: 1½ hp.
Power Source: 120V 20A
Pulling Force: Maximum: 8,000 lb.
Continuous: 6,500 lb.
Pulling Speed: No load – 9 fpm;
@ 2,000 lbs. – 8 fpm;
@ 4,000 lbs. – 7.5 fpm;
@ 6,000 lbs. – 6 fpm.
Required Rope: 7⁄8" dia. Double-Braided
Polyester Composite;
Rated @ 32,000 lbs.
Part No. Description
6800 Ultra Tugger® 8 Cable
Puller Power Unit
6800
Ultra Tugger® 4 Cable Puller -
Rated to 4,000 lbs.
All the features of the Ultra Tugger 2 plus
more!
• 4,000 lb. Pulling Force
• Two Pulling Speeds
• Quick Latch System (no loose parts)
• Set-Up Versatility
• Easy Mobility
• Equipped with Pull Force Gauge and Foot
Switch
• Standard boom extension: 8', Optional
boom extension: 12'
• Dedicated Pulling Motor
• Designed with key safety features
Ultra Tugger® 4 Specifications
Weight: 175 lb.
Drive Motor: 1-1/4 hp. 120 VAC, 60 Hz,
15 Amp.
High Pulling No load: 26 fpm
Speeds: 2,000 lbs.: 20 fpm
Low Pulling No load: 13 fpm
Speeds: 2,000 lbs.: 10 fpm
Max Pulling High Speed: 2,000 lbs.
Force: Low Speed: 4,000 lbs.
Continuous
Pulling Force: Low Speed: 3,000 lbs.
Use with: 9/16" diameter, dbl.
braided composite rope
Part No. Description
UT4 Ultra Tugger® 4 Cable
Puller Unit.
10014 Floor Mount
10015 12' Boom Extension
35283 9/16" x 300' Dbl. Braided
Composite Pulling Rope
35283 9/16" x 600' Dbl. Braided
Composite Pulling Rope
35283 9/16" x 1,200' Dbl.
Braided Composite Pulling
Rope
3048 Storage Box
2142 Storage Box (requires
boom to be removed from
puller)
380 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE PULLERS AND TUGGERS
Super Tugger® Puller Packages - Rated 6,500 lbs.
Super Tugger® Puller Packages
Part No. Description
6004 Super Tugger® Complete Puller Package. Includes 6001 Super Tug-
ger®, floor mount, mobile carriage, boom mount, 4' boom tube, nose
unit, 2½", 3", 3½" & 4" slip-in couplings, and storage trays.
6005 Super Tugger® Complete Puller Package w/o Rope. Includes 6001
Super Tugger®, floor mount, mobile carriage, boom mount, 4' boom
tube, nose unit, 3' boom tube, elbow unit, 2½", 3", 3½" & 4" slip-in
couplings, and storage trays.
(Super Tugger® Puller Packages are available with 220 VAC 50 Hz Cable Puller units.
Please call for complete pricing and ordering information)
Super Tugger® Cable Puller - Rated 6,500 lbs.
Super Tugger® Specifications
Weight: 108 lb. (Power Unit
only)
Dimensions: Length: 20¾"
Width: 22½"
Height: 12"
Drive Motor: 1½ hp.
Power Source: 120VAC
Pulling Force: Maximum: 6,500 lb.
Continuous: 4,500 lb.
Pulling Speed: No load – 16.5 fpm;
@ 2,000 lbs. – 11.0 fpm;
@ 4,000 lbs. – 7.5 fpm;
@ 6,000 lbs. – 6 fpm
Required Rope: ¾" dia. Double-Braided
Polyester Composite;
Rated @ 26,000 lbs.
6001
• Pulls up to 6,500 lb. with less than 27 lb.
of operator effort.
• Unique floor mounting attachment for
quick, reliable setup.
• Leaf type mounting chains won’t twist
when tightening.
• Heat treated steel serrated gripper feet
for secure mounting to conduit.
• Force gauge included to constantly moni-
tor the pull.
• Right angle sheave allows the operator
to stand out of the direct line of force.
• Audio alarm high force warning and cir-
cuit breaker shut off at maximum force
for added safety.
• Tapered capstan and patented roped
guidance system for better control of the
rope when feeding onto the capstan.
Part No. Description
6001 Super Tugger® cable puller power unit, includes force gauge and vise chains.
6001-22 Same as 6001 except 220 VAC 50Hz.
6004 & 6005 Packages
Ultra Tugger® Adapter Package
• Adapt Greenlee 640 Tugger & 6001
Super Tugger® to Ultra Tugger® wheeled
carriage & boom for faster & easier
cable puller set-ups.
• Wheeled carriage & boom provides fast
setup with no anchors to set or chains to
mount.
• Boom uses 3" rigid steel conduit for easy
length adjustment to pull 10' of cable
out of the box fast & easy.
• Optional elbow unit and boom available
to reach into manholes or pull up to 20
feet of cable out of the box.
Ultra Tugger® Adapter Specifications
Weight: 198 lb.
Dimensions: Length: 91½"
Width: 27"
Height: 38½"
Use With: Greenlee 640 & 6001
Cable Pullers.
Load Rating: 6,500 lb.
Part No. Description
11147 Ultra Tugger® 640/6001
adapter package. Includes
wheeled carriage; 4' boom,
boom adapter; nose unit;
2½", 3" & 4"
slip-in couplings; 2", 3" &
4" screw-on couplings.
00863 Elbow Unit
00835 3 ft. Boom
00815 Slip-in Coupling - 3½"
00827 Slip-in Coupling - 5"
00781 Screw-in Coupling - 2½"
00783 Screw-in Coupling - 3½"
3048 Storage Box
11147
381
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE PULLERS AND TUGGERS
6503
6505
6805A 6801
Ultra Tugger® 5 Puller Packages
Ultra Tugger® 8 Puller Packages • UT-8 •
Ultra Tugger® Puller Packages
UT-5 Puller Packages - Rated to 5,000 lbs.
UT-8 Puller Packages - Rated to 8,000 lbs
These packages provide the most versatility to accommodate virtually any cable pulling
configuration that would be needed. Available with either Ultra Tugger® 5 or Ultra Tugger® 8
power units. The Versi-Boom system allows you to make versatile and fast setups and pull
10 ft. or 20 ft. of extra cable easily. The Versi-Boom also provides the capability to reach
below ground level, yet allow the operator to run the puller from above ground, thereby
avoiding potentially dangerous confined space issues.
Ultra Tugger® 5 Puller Packages • UT-5 •
Part No. Description
6503 Ultra Tugger® 5 Cable Puller Basic Package. Includes standard force
gauge; wheeled carriage; 4 ft. boom, boom mount & nose unit; 2½",
3" & 4" slip-in couplings; 2", 3", & 4" screw-on couplings. Rope & stor-
age box optional.
6505 Ultra Tugger® Cable Puller Deluxe Package. Same as 6503 plus 3 ft.
boom, elbow unit & floor mount. Rope & storage box are optional.
Ultra Tugger® 8 Puller Packages • UT-8 •
Part No. Description
6801 Conduit or Pole Mount Package. Ultra Tugger® 8 Cable Puller with
Standard Force Gauge and Conduit Chain Mount.
6803 Basic Package without Rope. Ultra Tugger® 8 Cable Puller w/Standard
Force Gauge. Versi-Boom™ System. 2-1/2", 3" & 4" Slip-in and Screw-
on Couplers. Wheeled Carriage, Screw-on Couplers and Two Accessory
Trays.
6805A Deluxe Package without Rope Same as 6803 plus Floor Mount and
Elbow Unit.
6805A-22 Same as 6805, except 220 VAC 50 Hz CE
Model 6805A shown with
optional Storage Box and
Floor Mount.
Look for this logo on products
throughout this tool section
that are available for rent.
Refer to our Rental Section in
this catalog for more details.
(Picture Not Shown)
382 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE PULLING PACKAGES / ACCESSORIES
Deluxe Force Gauge & Optional Strip Chart
• Measures tension on the rope, to an ac-
curacy of ± 5%
• Use with pulling rope up to 7/8" diameter
maximum or with Kevlar® tape.
• Optional strip chart recorder for perma-
nent record of pulling force.
Part No. Description
00967 Deluxe force gauge
33901 Strip chart recorder
00966 Cord patch
86328 Paper for chart recorder
Ultra Cable Feeder™
• Feeds cable at variable speeds to match
the speed of the cable puller.
• Accommodates cable ranging in size up
to 3½" in diameter
• Sets up easily and can be operated by
just one person.
• Dual motors drive each wheel for trac-
tion on both sides of the cable.
• Comes with pendant and toggle switch
or an optional foot switch to control
feeding.
Ultra Cable Feeder® Specifications
Weight: 285 lb.
Dimensions: Length: 41"
Width: 27½"
Height: 37½"
Power Supply: 115VAC, 15 amps, 60 Hz
Speed: 4 – 36 fpm
Cable Capacity: 8 x 250 MCM
6 x 500 MCM
5 x 750 MCM
Reel Wt. Capacity: 25,000 lbs. total
Maximum
Tractive Force: Single Cable: 200 lbs.
All Cables: 800 lbs.
Tire Pressure: 22 psi
Part No. Description
6810 Ultra cable feeder with hand
switch
445 Optional foot switch
6810
Ultra Tugger® Speed Booster
• Increases the speed of the Ultra Tugger® to pull approxi-
mately 2X normal speed, up to 2,500 lb
• For use with the Greenlee Ultra Tugger® 5 & Ultra Tugger®
8 cable pullers only.
• Increases productivity on lower force runs and during the
initial phase of a high force pull.
• Automatically switches to low speed at 2,500 lbs to pro-
tect the puller motor.
• Ultra Tugger® adapter cord and plug included.
Ultra Glider™ Cable Lubricator
• Applies lube more evenly around the
cable and more consistently than can
be done by hand. This reduces the force
required by the cable puller and reduces
the chance for damage to the cable.
• During a cable pull, the person feeding
the cable usually can operate the Ultra
Glider.
• Eliminates the need for a person to place
their hands near the point where the
cable enters the conduit or duct.
• Eliminates the mess and slippery
surfaces associated with manual cable
lubrication.
UGSAK Slip-In Applicator Kit
• Includes 2in, 2-1/2 in., 3 in., 3-1/2 in.,
and 4 in.applicators with case.
UGTAK Threaded Applicator Kit
• includes 2in, 2-1/2 in., 3 in., 3-1/2 in.,
and 4 in.applicators with case.
Ultra Glider Specifications
Weight: 14.5 lb.
Dimensions: Length: 39"
Width: 18"
Height: 17"
Power Supply: 12V Sealed lead
rechargeable battery
Hose Length: 10 ft.
Battery Life: 3-4 5 gallon buckets peer
charge
Part No. Description
UG512 UltraGlider 12V Assembly without Applicators
UG512ST UltraGlider 12V including Slip-In Applicator Kit UGSAK and Threaded Applicator
Kit UGTAK
UG512T UltraGlider 12V including Threaded Applicator Kit UGTAK
UG512S UltraGlider 12V including Slip-In Applicator Kit UGSAK
UGSAK Slip-In Appliactor Kit
UGTAK Threaded Applicator Kit
Ultra Tugger® Speed Booster Specifications
Capacity: 0 to 2,500 lb. pulling force in high speed mode.
Dimensions: Height: 9½" x Width: 13" x Depth: 15½"
Pulling Speed: No load – 28.5 fpm;
Ultra Tugger 5 @ 1,200 lbs – 25 fpm.
Pulling Speed: No load – 18 fpm;
Ultra Tugger 8 @ 2,000 lbs. – 16 fpm;
Power: 115 VAC, 15A output; 115/230 VAC 15/6A Output
Part No. Description
03561 Ultra Tugger® Speed Booster
UG512
UGTAK UGSAK
383
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE PULLING ACCESSORIES
Hook-Type Sheaves for
Easy Tugger™ & Tugger®
• 4,000 lb Rated
• Strong, welded steel frame.
• Forged steel closure type hooks with 1" opening.
• 5" wide aluminum alloy sheaves with self-lubricating
bearings.
• Select a sheave with a maximum rated capacity that
meets or exceeds the cable puller’s maximum
pulling force.
Part No. Description
650 6" dia. hook sheave with 1½" minimum radius
651 12" dia. hook sheave with 35/16” minimum radius
652 18" dia. hook sheave with 7" minimum radius
653 24" dia. hook sheave with 913/16” minimum radius
Light Base Sheave
• Makes pulling wires for parking area lights easier.
• Mounts directly to existing square light pole bolt patterns.
• Slotted mounting holes fit a wide range of bolt
circle sizes.
• Tall enough to position sheave above most conduits.
• Rugged welded steel base structure.
Part No. Description
459 Light Base Sheave
Rope Clevis
• Removable sheave for rope eye.
• For use w/flexible forged eye grips & eye grips.
• Removable bolt & rope sheave & grip eye bolt.
• Select the clevis with a maximum rated clevis that meets or
exceeds the cable puller’s maximum pulling force.
Part No. Description
578 Rope clevis
579 Rope clevis
678 Rope clevis
For forged eye grips
For flexible eye grips
For forged eye grips
578 678 579
Flexible Adapter Sheaves
for Tugger™ & Super Tugger®
• Use to attach to the conduit in conjunction with adapter sheave
for easier set-ups.
• Helps eliminate strains on hangers and boxes.
• Select a sheave with a maximum rated capacity that meets or
exceeds the cable puller’s maximum pulling force.
Part No. Description
685 Flexible adapter sheave for use with 640 Tugger®
cable puller. Max Cap. 4,000 lbs.
6085 Flexible adapter sheave for use with 6001
Super Tugger® cable puller. Max. Cap. 6,500 lbs.
685
6085
Hook Sheaves
• For use with any Greenlee cable puller.
• Strong, welded steel frames.
• Forged steel closure type hooks with 1" opening.
• All three sheaves are aluminum alloy with self lubricating bearings.
Sheave 8012 8018 8024
Diameter 12” 18” 24”
Description Part No. Part No. Part No.
Roll Pin 50700 50700 50700
Sheave Pin 00838 00846 00850
Sheave Pin Clip 50302 50302 50302
Sheave Unit 00843 00844 00845
12" 18" 24"
Set Screw Clamp Pulling Grips
• Use to pull in 2" or larger conduit
• Type of pulls: heavy and long runs
• Type of grip: Flexible eye ¼" diameter galvanized steel aircraft
cable connected to 2 cable receptacles with 5/8" diameter open-
ing and 2 clamping set screws.
• Select pulling grips with a maximum rated capacity that meets
or exceeds the cable puller’s maximum pulling force.
Part No. Description
629 Pulling grip with clevis includes 624S, 624L & 678
clevis - 4 clamp - max. rated capacity: 6,500 lb.
Each grip has two opposed set screws that provide
positive locking. Openings in wire grip should be
50% filled with wire to assure slip-proof grip.
384 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE PULLING ACCESSORIES / ROPE
Double Braided Composite Rope for High Force Cable Pullers
Multiplex Cable Pulling Rope for Low Force Cable Pullers
Max. Rated Avg. Breaking Rope Rope
Part No. Diameter Length Capacity Strength Weight Stand
For the 640 Puller
35283 9/16" 300’ 4,000 lb 16,000 lb 28 644
35284 9/16" 600’ 4,000 lb 16,000 lb 63 644
35285 9/16" 1,200’ 4,000 lb 16,000 lb 130 †
For the 6001 Puller
35098 3/4" 300’ 6,500 lb 26,000 lb 58 644
35100 3/4" 600’ 6,500 lb 26,000 lb 113 654
35101 3/4" 1,200’ 6,500 lb 26,000 lb 230 †
For the 6800 Puller
34136 7/8" 300’ 8,000 lb 32,000 lb 90 654
34137 7/8" 600’ 8,000 lb 32,000 lb 178 654
34138 7/8" 1,200’ 8,000 lb 32,000 lb 359 †
† This rope does not fit on a rope stand. Use reel jacks and a spindle to dispense.
Max. Rated Avg. Breaking Rope Rope
Part No. Diameter Length Capacity Strength Weight Stand
For the 446 Puller
480 1/2" 300’ 1,200 lb 6,400 lb 21 406
481 1/2" 600’ 1,200 lb 6,400 lb 50 644
482 1/2" 1,200’ 1,200 lb 6,400 lb 104 †
For the 2001 Puller
483 5/8" 300’ 2,000 lb 10,000 lb 34 644
484 5/8" 600’ 2,000 lb 10,000 lb 75 644
485 5/8" 1,200’ 2,000 lb 10,000 lb 142 †
6005 5/8" 300’ 2,000 lb 12,500 lb 58 644
6015 5/8" 600’ 2,000 lb 12,500 lb 113 654
6025 5/8" 1,200’ 2,000 lb 12,500 lb 230 †
† This rope does not fit on a rope stand. Use reel jacks and a spindle to dispense.
Rope Stands
• Used to organize and rewind rope.
• Welded steel with washer and spring clip
to hold rope reel on the stand.
Spindle Max Reel
Part No. Dia. Dia. Width
405 1.50" 10" 6"
406 0.62" 13" 9"
644 1.50" 17" 16"
654 1.90" 24" 19"
Basket Wire
Junior Pulling Grip Set
• Pull in conduit or tray for medium duty pulls
• Single weave galvanized steel mesh with flexible pulling eye.
Cable Dia.Range Max. Rated Cap. Eye Mesh
0.25" - 0.36" 90 lbs. 3¼" 4¼"
0.37" - 0.49" 180 lbs. 3¼" 7"
0.50" - 0.61" 260 lbs. 4¼" 8½"
0.62" - 0.74" 390 lbs. 5" 10"
0.75" - 0.99" 560 lbs. 5¾" 10"
1.00" - 1.24" 780 lbs. 6½" 11½"
Part No. Description
30758 Building Wire Junior Grip Set, (6) Grips
654
405
• Strong, white polyester braided rope with green tracer.
• Rot and mildew resistant.
• Low stretch.
• Packed on sturdy wooden reel.
• Factory spliced eyes at both ends.
• Custom made to Greenlee specifications to provide 4:1 Safety Factor required for cable pulling.
• Double braided inner core with an extra double braided outer jacket for added strength and less
stretch - white with green tracer.
• Lowest stretch.
• Rot and mildew resistant.
• Factory spliced eyes at both ends.
385
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE PULLING ACCESSORIES / LUBRICANTS
Cable-Cream™ Cable Pulling Lubricant
• Advanced formula, light yellow cream
makes pulling faster & easier.
• Compatible with all cable insulation types.
• Dries slowly to a thin, non-conductive,
non-hardening residue.
• Adheres to the cable without messy dripping.
• Environmentally safe/non-hazardous.
• Cleans up easily - non-staining.
• Won’t break down or separate after ex-
posure to freezing cold or blistering heat.
Part No. Description
CRM-Q Cable-Cream™ 1 quart
Squeeze Bottle
CRM-1 Cable-Cream™ 1 gallon
CRM-5 Cable-Cream™ 5 gallon
CRM-55 Cable-Cream™ 55 gallon
Cable-Gel™ Cable Pulling Lubricant
• Polymer based lubricant offers lower
friction and easier pulling.
• Compatible with all cable insulation types.
• Cleans up quickly - non-staining.
• Will not cement itself to the pipe.
• Dries slowly.
• Can be applied by hand or pump.
• Higher lubricity than competitive products.
• Won't breakdown or separate after
exposure to heat or cold.
Part No. Description
GEL-Q Cable-Gel™ 1 quart
Squeeze Bottle
GEL-1 Cable-Gel™ 1 gallon
GEL-5 Cable-Gel™ 5 gallon
GEL-55 Cable-Gel™ 55 gallon
Winter-Gel™ Cable Pulling Lubricant
• Will not freeze until -25°F (3.9°C).
• Can be used all year long.
• Reduces friction for easy pulling.
• Cleans up quickly and easily.
• High lubricity.
• Environmentally safe.
• Safe with all cable insulation types.
Part No. Description
WGEL-1 Winter-Gel™ 1 Gallon
WGEL-5 Winter-Gel™ 5 Gallons
Lube Spreader Swab
• Tapered shape permits bi-
directional use.
• Will not damage inner walls of duct.
• Spreads a coat of wire lubri-
cant in duct before cable installation.
• Cleans mud, dirt and light debris from duct before pulling.
• Max. rated capacity: 4800 lbs.
Duct Disk
Part No. Size Size
16854 2 1.75
16856 2.5 2.25
16857 3 2.75
16858 3.5 3.25
Duct Disk
Part No. Size Size
16859 4 3.75
17370 5 4.75
17371 6 5.75
Screw Type Reel Stands
• Wide welded steel base for added stability.
• Roller bearings fit in the spindle groove to
keep the spindle in place and turning freely.
• Two stands and a spindle are required for a
complete set-up.
Part No. Description
683 Reel Stand 22” - 54”
687 Reel Stand 13” - 28”
684 Spindle for 683 Reel Stand
647 Spindle for 687 Reel Stand
25591 Stop Pin (683 - 2; 687 - 1)
38619 Jackscrew Repl. Unit for 68
or 687 687
683
Ratchet Type Reel Stands
• Easily raises or lowers the height.
• Two stands and a spindle are required for a
complete set-up.
• Roller bearings fit in the spindle groove to
keep the spindle in place and turning freely.
Part No. Description
656 Ratchet Reel Stand 28” - 455/8”
657 Spindle for 656 Reel Stand
38697 Jackscrew Replacement Unit
656
386 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
REEL STANDS / WIRE CARTS
Econo Mac Reel Stands
• Capacity to 2,500 lbs.
• Self-lubricating bearings – no grease
required.
• One-bolt disassembly - no welding re-
quired for service.
• Double-pronged pins.
• Two stands and a spindle are required
for a complete set-up.
Part No. Description
780934 Econo Mac #65 15½” - 27”
780935 Econo Mac #75 23¾” - 52¾”
Wire Dispenser
• All welded steel construction.
• Includes 2 fixed and 2 locking swivel
heavy-duty casters.
• Spool rack consists of 10 spindles and
an adjustable guide loop & can be
turned 360° independent of the base.
• Spindles are angled to contain reels &
act as a brake while paying out wire.
• Fits through 36" door openings.
• 36¼" L x 31½" W x 59" H. Wt. 213 lbs.
Part No. Description
910 Wire Dispenser
6-Spindle Wire Caddy
• All welded steel construction with 6 reeel
spindles and feeding eye.
• Includes 2 fixed & 1 locking swivel
wheels allowing easy movement & control.
• Spool rack consists of 10 spindles and
an adjustable guide loop & can be
turned 360° independent of the base.
• Spindles are angled to contain reels &
act as a brake while paying out wire.
• Fits through 30" door openings.
• 39" L x 30" W x 31" H. Wt. 93 lbs.
Part No. Description
909 6-Spindle Wire Caddy
Wire Reel Support Frame
• Consists of (1) frame with (2) wheels. 2
or more frames and a spindle of 1" ridgid
conduit are required to create a reel support
setup.
• Easy setup takes only seconds to create.
• Swivel locking casters incl;uded on each
frame.
• 17½" W x 14" H. Wt. 8.4 lbs.
Part No. Description
914 Wire Reel Support Frame
Hand Caddy
• Holds (4) 500' spools 0f #10 AWG (7"
dia. x 6"-10" wide)
• Holds up to (8) 500' spools 0f #12 AWG
(7" dia. x 5" wide)
• 3/8" diameter solid steel spool support
spindles.
• Spool retaining washers on spindles.
• Pinless design eliminates loose parts.
• 21"L x 10½" W x 13½" H. Wt. 4 lbs.
Part No. Description
9502 Hand Caddy
Reel Stand Spindles
• Tempered steel with grooves to fit reel stand
rollers.
Part No. Description
647 Spindle for 687 Reel Stand
5,000 lb. capacity. 62" L.
657 Spindle for 656 Reel Stand
7,500 lb. capacity. 100" L
684 Spindle for 683 Reel Stand
5,000 lb. capacity 76" L
Data Cable Caddy
• Width is ideal for large diameter spools of
coax, data and communications cable.
• 21" L x 28½" W x 11½" H. Folds down for
easy storage
Part No. Description
9520 Data Cable Caddy
#65
#75
909
9520
914
387
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE CARTS
Caddy Mac #3 Wire Cart
• Uses 5 spindles with 5/8"
diameter.
• Unique spindle locking sys-
tem, no loose clips.
• Storage loops retain up to 5
spindles.
• 7 mounting positions.
• Dual wire guides.
• Large spool capacity.
Spool Maximum Spool Size
Qty Diameter Width
1 24" 17¾"
2 18" 17¾"
3 14" 17¾"
8 10" 8½"
10 7" 8½"
15 7" 5¾"
Max. Platform Load: 250 lb.
Dim: 47¼" H x 26½" W x 21½"L
Wt: 67 lbs.
Part No. Description
783400 Caddy Mac #3
Caddy Mac #4 Wire Cart
• Large capacity wire cart.
• Easy loading of wire spools.
• Patented spindle locking
system, no loose clips.
• Convenient storage loops
contain up to 5 spindles.
• Solid frame construction.
• Large 10" wheels.
• Dual wire guides.
Spool Maximum Spool Size
Qty Diameter Length
6 8" 500'
6 16" 2,500'
Dim: 55¾" H x 27" W x 27"L
Wt: 67 lbs.
Part No. Description
783411 Caddy Mac #4
Cable Reel Transporter
• All steel welded frame w/heavy-
duty wheels.
• Unique design provides easy
setup for cable payout.
• Handle folds to save space
when using as a dispenser.
• 63" L x 297/8" W x 26¾" H.
Wt. 110 lbs. Maximum reel
weight: 300 lbs.
Part No. Description
916 Wire Dispenser
Wire Cart
• Large capacity.
• 5 reel axles with spring clip
retainers and 2 positions for
axle storage allows configu-
ration for large reels with no
loose parts.
• Tubular steel welded frame w/
8" heavy-duty wheels.
• Built-in wire guide for horizontal
dispensing.
• Will pass through 28" wide
opening.
• 54½" L x 27" W x 26½" H.
Wt. 62 lbs. Maximum spool
weight: 550 lbs.
Part No. Description
911 Wire Cart
Spool Mac
• All steel frame construction.
• 10" Wheels.
• Easy set-up for cable dis-
pensing.
• No loose pieces.
• Compact storage.
• Fits through 32" doorways.
• 350 lb lifting capacity.
Reel Capacity
Width Diameter Weight
25" 40" 350 lbs.
Dim: 31½" W x 16" D x 63½"L
Wt: 80 lbs.
Part No. Description
783444 Spool Mac
BX-Cable Dispenser
• Dispenses BX, armoured
cable, flexible conduit,
Greenfield or NM-B cable
fast and easy without twists
or tangles.
• Base with adjustable tension
control rotates to dispense
cable without overpulling.
• Large pulling eye rotates
freely and can be used as a
carrying handle when dis-
penser is empty.
• 13½" H x 26" dia. Wt. 31 lbs.
Part No. Description
37218 BX-Cable Dis-
penser
783444
783400
783411 783400
783411
911
388 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CONDUIT & PIPE RACKS / CARTS
Conduit & Pipe Storage Rack
• 7 individual bins allow sorting by size
and type.
• Folds down for storage.
• Casters included.
Specifications
Capacity: 1000 lbs.
Dimensions: 63½" H x 58½" L x 34" W
Folded Down: 19" H x 58½" L x 34" W
Weight: 113 lbs.
Part No. Description
668 Mobile Conduit & Pipe Rack
503 Repl. 6" Caster Set, 4 - Swivel
603 Repl. 6" Caster Set, 2-Ridgid,
2-Swivel
MackRack I
Mobile Storage Cart
MackRack II
Mobile Storage Cart
Bundle Mac
• Holds large bundles of conduit.
• Arms fold in seconds for convenient storage.
• 1,000 lb. load capacity.
• Stacks with all Mac carts.
Specifications
Capacity: 1000 lbs.
Dimensions: 42½" H x 58½" L x 33" W
Weight: 165 lbs.
Part No. Description
783320 BundleMac Cart
Pipe Cart
• Easy, single
person opera-
tion saves time
and money.
• Move standard
20' lengths of
pipe.
• Large 4.80" x
8" pneumatic
tires.
• Heavy-duty
steel construc-
tion for long
service life.
Specifications
Capacity: 20" diameter, 1000 lbs.
Part No. Description
36745 Pipe Cart
Cricket Pipe Cart
• Transport 20' pipe lengths up to 1,000 lbs.
• Lightweight (70 lbs.).
• Quick handle disconnect for convenient storage.
• Carries up to 12" diameter pipe.
Part No. Description
782699 Cricket Pipe Cart
Specifications
• Mac Rack II has a convenient utility tray.
• Arms fold easily with plunger release.
• Shipped assembled with 6" heavy duty
casters.
• Powder coat finish.
Dimensions: 63½" H x 58½" L x 34" W
Folded Down: 19" H x 58½" L x 34" W
Ground Clearance: 7.5"
Part No. Description
783299 MacRack II Cart
36745
Cricket
782699
Bundle Mac
783320
668
783299
783317
• 1000 lb. storage capacity.
• Double wall square tubing.
• Eight bins of storage.
• Stack similiar carts together or with
other Stacking Mac Rack products.
Capacity: 1000 lbs.
Weight: 165 lbs. (MacRack I)
172 lbs. (MacRack II)
Part No. Description
783317 MacRack I Cart
389
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE STRIPPING TOOLS
Wiring Tool
• Strips AWG wire sizes: 10, 12, 14, 16,
18, 20 and 22. Strips mm wire sizes:
.80, 1.0, 1.3, 1.6, 2.0, 2.6.
• Precision holes for wire stripping. Cuts
machine bolts withou damaging threads:
sizes: X4-40, 5-40, 6-32, 8-32, 10-32 and
10-24.
• Crimps both insulated and non-insulated
connections
• Scissor-type blades are precision ground
and heat treated to hold their edge.
• CHANNELLOCK BLUE® comfort grips.
Part No. Description
908 Wiring Tool
Wire Stripper-Cutter
• Designed to cut copper wire only
• Strips AWG wire sizes: 10, 12, 14, 16,
18, 20 and 22.
Strips mm wire sizes: .80, 1.0, 1.3, 1.6,
2.0, 2.6.
• Precision holes for wire stripping
• Lean plier nose pulls and loops wire.
• Scissor-type blades are precision ground
and heat treated to hold their edge.
• Highly visible AWG and mm wire guage
sizes painted and embossed in the metal.
• CHANNELLOCK BLUE® comfort grips.
Part No. Description
958 Wire Stripper
Wire Stripper/Cutter
• Compact, lightweight wire-stripping &
cutting tool.
• Narrow nose fits into tight places.
• Spring-loaded, self-opening.
• Precision-ground stripping holes.
• Clear gauge markings on both sides.
• Black-oxide finish
• Textured handles provide a firm, com-
fortable grip.
Part No. Description
11045 Wire Stripper - Yellow
Handle, Strips AWG 10, 12,
14, 16, 18 ga. solid wire.
11046 Wire Stripper - Red Handle,
Strips AWG 16, 18, 20, 22
24, 26 ga. stranded wire.
11047 Wire Stripper - Yellow
Handle, Strips AWG 22, 24,
26, 28, 30, ga. solid wire.
Wire Stripper/Cutter
• Strips six standard wire sizes (10 - 20 AWG
solid 7 stranded) without nicking wire.
• Scissors action of ½" (13 mm) wide cutter
makes clean cuts with little effort.
• Serrated nose jaws to bend, shape, or
pull wire; holes for looping wire ends.
• Spring-loaded for self-opening action.
• Comfortable, plastic-covered handles.
Part No. Description
1011 Wire Stripper/Cutter
Wire Stripper/Cutter
• A handy, light, compact tool for stripping
insulation.
• Convenient hole for looping or bending
wire.
• Black-oxide finish with plastic-dipped
handles.
• Cuts, strips, and loops 12-26 AWG solid
and stranded wire.
• Adjustable slide stop with set screw for
repeat stripping work.
Part No. Description
1004 Wire Stripper/Cutter
Multi-Purpose 6-N-1 Tool
• Cleanly shears bolts.
• Easily cuts and strips wire.
• Measures stud sizes.
• Gauges wire sizes.
• Crimps insulated terminals.
• Plastic-covered cushioned handles for
comfort.
Part No. Description
1000 Multi-Purpose 6-N-1 Tool
Multi-Purpose Electrician’s Tool
• Two wire cutters—one at tip, the other
halfway back near stripping holes
• Crimps 7-8 mm insulated and non-insu-
lated terminals, lugs and splices.
• Cuts and strips 8-22 AWG solid and 10-
26 AWG stranded wire.
• Cleanly shears bolts.
• Pivot nut adjusts tension.
• Left- & right-hand wire-looping holes.
• Full-sized, plastic-covered cushioned
handles for comfort.
• Crimping dies color-coded
Part No. Description
1001 Multi-Purpose 6-N-1 Tool
Long Nose, All-Purpose Tool
• Easily cuts and strips wire.
• Narrow, serrated plier nose to pull, loop
and bend wire.
• Long, curved cutting blade.
• Cutters and strippers are in front of the
pivot for maximum ease-of-use in reach-
ing into tight places.
• Crimps insulated and non-insulated ter-
minals and 7 to 8 mm ignition terminals.
• Cleanly shears bolts.
• Plastic-covered cushioned handles for
comfort.
Part No. Description
1010 Long Nose, All-Purpose Tool
Multi-Purpose Tool
10-22 AWG Solid
• Crimps insulated and non-insulated
terminals, lugs, and splices.
• Crimps 7 mm ignition and distributor
terminals.
• Easily cuts and strips wire.
• Cleanly shears bolts.
• Wire cutter in nose.
• Plastic-covered cushioned handles for
comfort.
Part No. Description
1002 Multi-Purpose Tool 10-22
AWG Solid
390 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIRE CUTTING HAND TOOLS
Side Cutting Pliers
Klein side-cutting pliers come in two styles.
Standard duty and the innovative Klein
“2000 Series" with super-tough cutting
knives, specially designed and heat-
treated to cut bolts, nails, ACSR, and most
hardened wire without damage. All “2000
SERIES" have combination polished and
black-oxide finish.
High-Leverage NE-Type
Side Cutters
Our most popular side cutting pliers.
Smooth, streamlined nose with knurled
jaws. High-leverage design provides 46%
greater cutting and gripping power than
regular 8-1/2" and 9-1/4" side cutters. Blue
plastic-dipped handles.
Part No. A B C D E
D213-9NE 9-1/4 1-19/32 1-5/16 5/8 25/32
Klein 2000 Series
D2000-9NE Same as D213-9NE except with ultra
durable “2000 Series" cutting knives for
ACSR, bolts, nails and most hardened
wire. Blue plastic-dipped handles.
Standard NE-Type Side Cutters
Smooth, streamlined design. Slides more
easily in and out of tool pouch. Plastic-
dipped handles.
Part No. A B C D E
D201-9NE 9-1/4 1-19/32 1-5/16 5/8 25/32
High-Leverage NE-Type Side
Cutters with Crimping Die
Same high-leverage design and mechanical
cutting advantage as D213-9NE pliers, but
with crimping die at the hinge for crimping
sleeve connectors. Plastic-dipped handles.
Part No. Description
D213-9NE-CR Same as D213-9NE w/
crimping die
Klein 2000 Series
D2000-9NE-CR Same as D2000-9NE w/
crimping die
High-Leverage Diagonal Cutters
High-leverage design provides a 36%
greater mechanical cutting and gripping
advantage than regular diagonal cutters.
Standard-bevel cutting knives. Plastic-
dipped handles - hand form style No.
D228-8.
Part No. A B C D
D228-8 8 13/16 1-3/16 7/16
Klein 2000 Series
D2000-928 Same as D228-8 except with
ultra durable “2000 Series"
cutting knives for ACSR, bolts,
nails and most hardened wire.
Blue plastic-dipped handles.
High-Leverage Diagonal Cutters
with Angled Head
High-leverage, heavy-duty with head
angled for easier work in confined areas.
Standard-bevel cutting knives. Plastic-
dipped handles.
Part No. A B C D
D248-8 8 1-3/16 1-3/16 7/16
Standard Diagonal Cutters with
Tapered Nose
Tapered Nose and standard-bevel cut-
ting knives. Available with or without coil
spring. Plastic-dipped handles.
Part No. A B C D
D202-5 5-1/2 13/16 11/16 7/16
Midget Pointed Nose Diagonal
Cutters with Extra Narrow Jaw
Full flush-cutting diagonal cutters with fine,
narrow jaw taper and narrow hinge for es-
pecially delicate work. Fully polished head
and neck. With coil spring. Plastic-dipped
handles.
Part No. A B C D
D259-4C 4-3/16 1/2 1-3/32 1/4
Midget
Light-Weight
Diagonal Cutters
These inexpensive pliers
shear wire up to No. 14
AWG with unique flush-cut-
ting action that minimizes
fly-off. Design greatly reduc-
es cutting effort. Compact
head is easy to manipulate
in tight areas. Comfortable
plastic covered handles.
Lightweight yet rugged
construction. Steel hold-open spring.
Part No. Length
D275-5 5"
High-Leverage Diagonal Cutters
with Skinning Holes
High-leverage, heavy-duty with two skin-
ning holes for 12 and 14 gauge wire.
Standard-bevel cutting knives. Plastic-
dipped handles.
Part No. A B C D
D243-8 8 13/16 1-3/16 7/16
Heavy-Duty Diagonal Cutters
With Tapered Nose
Tapered nose and standard-bevel cutting
knives. One-inch jaws reach into confined
spaces. Plastic-dipped handles.
Part No. A B C D
D220-7 7-11/16 1 31/32 1/2
Diagonal-Cutting Pliers
Klein diagonal-cutting pliers come in two styles;
Standard duty, a premium quality design and
rugged, precision construction; and the innovative
Klein “2000 SERIES" with super-tough cutting
knives, specially designed and heat-treated to cut bolts, nails, ACSR, and most hardened
wire without damage. All “2000 SERIES" have combination polished and black-oxide
finish.
WARNING: Plastic-dipped or slip-on plastic
handles are NOT intended for protection
against electrical shock.
Dimensions for pliers shown are accurate within accepted commercial tolerances, which
allow slight variations that normally result from forging and grinding operations.
WARNING: Never use any pliers or cutters on live electrical circuits.
Key to Dimensions for Pliers
A - Overall Length D - Jaw Thickness
B - Jaw Length E - Knife Length
C - Jaw Width F - Point Thickness
All dimensions are in inches and (millimeters).
391
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ELECTRICAL HAND TOOLS
Standard Cable Cutters
Economically priced, lightweight, yet ef-
ficient shear-type cable cutters. # 63041
cuts soft cable up to 1-3/8" diameter. #
63045 cuts soft cable up to 1-3/4". Hook
jaw shape forces cable into jaws. Heavy-
duty pins in head serve as blade-stops.
Jaws are of drop-forged alloy tool steel
and are replaceable if damage or worn
out. Beveled tips assure positive mating,
and hinge on a rugged bolt with a pinset
nut to maintain proper blade tension. Not
designed for cutting steel or ACSR.
MCM
Part Cable Cutting Overall Approx
No. Capacity Length Weight
63041 500 Cooper, 25-1/2" 4-1/2 lb
750 Aluminum
63045 1000 Cooper, 32" 6 lb
1200 Aluminum
Replacement Cable Cutter Heads
Part No. Fits Klein Part No.
63081 63041
63090 63045
Tapping Tools Triple-Tap Tool
For cleaning and chasing burred threads.
Replaceable, chrome-finished 3" (76 mm)
steel blade threaded to tap three hole
sizes. Available in two tapping size combi-
nations. Clear plastic handle, colour coded
for identification.
Part No. Color Code Taps Screw Holes
625-24 Blue 6-32, 8-32 & 10-24
625-32 Orange 6-32, 8-32 & 10-24
Replacement Blades. Chrome-finished
steel tapping blades for No. 625-24 and
625-32 Triple-Tap Tools above.
Part No. Description
626-24 Repl. Blade for No. 625-24
626-32 Repl. Blade for No. 625-32
Six-in-One Tapping Tool
Quickly forms new threads, re-forms
burred threads, and cleans out plaster
obstructions. Each tap size re-threads to
next larger size if threads are stripped.
Two high-carbon steel taps are secured in
reversible holder. Holder fits into large,
clear plastic handle. To change taps, sim-
ply reverse holder in handle.
Part No. Overall Length
627-20 7-1/2"
Replacement Taps: For No. 627-20.
Part No. Tap Size
627-32 10-32, 8-32, 6-32
628-20 1/4-20, 12-24, 10-24
All-Steel Scratch Awl
One-piece forged-steel blade and husky
handle for optimum strength. Heat-treated
for maximum life. Black finish.
Part No. Blade Length Overall Length
66385 3-1/2" 7"
Cushion-Grip Scratch Awl
Professional, heavy-duty, hard-pointed awl
scribes metal, starts screw holes, per-
forms a variety of piercing and punching
jobs. Rigid, chrome-plated, heat-treated,
tempered-steel shank has full reinforc-
ing bolster at handle for extra strength.
Flanged shank is anchored deep in full-
sized amber plastic handle with Cushion-
Grip for maximum comfort.
Part No. Blade Length Overall Length
650 3-1/2" 7"
Insulated High-Leverage
Diagonal Cutters
w/ Angled Head
High-leverage, heavy-duty design with angled
head for easier work in confined areas.
Part No. Length
D248-8-INS Nominal 8" length insulated
angled-head diagonal
cutters
D2000-48-INS Same as D248-8-INS but
w/ “2000 Series" cutting
knives for ACSR, bolts,
nails & most hardened wire.
High-Leverage Cable Cutter
'e-cutting jobs with ease. Special high-
leverage design gives it amazing cutting
capability for its size. Cable-gripping
shear-type jaws cut up to 4/0 aluminum
(not ASCR) -pair, 24-ga. communication
cable. Makes clean, efficient cuts. Com-
pact. Ideal for working in confined spaces.
Tough, comfortable, red plastic-dipped
handles. Not designed for cutting steel or
ACSR.
Part No. Length
63050 9-1/2"
Long Nose / Special Purpose Pliers
Standard Long-Nose
The basic Klein long-nose pliers. Available
with or without coil spring. Knurled jaws,
yellow plastic-dipped handles.
Part No. A B C D F
D301-6 6-5/8 1-15/16 11/16 3/8 3/32
D301-7 7-1/8 2-7/16 11/16 3/8 3/32
HD Long-Nose with Side Cutters
Heavier design long-nose pliers for easier, more
comfortable cutting. Plastic-dipped handles.
Part No. A B C D F
D203-8 8-5/16 2-5/16 1 1/2 5/8 1/8
HD Long-Nose w/ Side Cutters,
Skinning Hole & Crimping Die
With skinning hole for No. 12 AWG insulated
wire and crimping die for connectors, lugs and
terminals. Comfortable plastic-dipped handles.
Part No. A B C D F
D203-8NCR 8-5/8 2-5/16 1 1/2 5/8 1/8
Conduit Locknut and
Reaming Pliers
Tightens conduit locknuts, fit-
tings and caps. Reams both the
inside and outside of conduit.
The special long-nose jaw de-
sign makes tightening locknuts
faster and easier on electrical
outlet boxes and in hard-to-
reach areas where conduit
fittings are used.
Part No. Overall Length Jaw Length
D333-8 7-3/4” 1-5/8”
392 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CUTTING TOOLS
Cable Cutter
• High-leverage design.
• Precision, one-hand shearing action.
• Cable-gripping shear-type jaws.
• Perfect for working in confined spaces.
• Beveled jaw tips provide proper mating and
shearing action.
• Maximum cable cutting capacity: 4/0 alu-
minum, 2/0 soft copper, 100-pair 24 AWG
communications wire.
Part No. Description
63050 Cable Cutter
Journeyman™ Cable Cutter
• Cuts up to 4/0 aluminum AWG (no ACSR),
2/0 AWG soft copper and 100-pair 24 AWG
communications cable.
• High-leverage for greater cutting power.
• Precision, one-hand shearing action.
• Soft, red handle material on outer surface.
Part No. Description
J63050 Journeyman™ Cable Cutter
Crimping/Cutting Tool
• Accommodates wire from #10 to #22 AWG.
• Specially hardened wire cutter in nose.
• Tapered nose design.
• Crimping die marked for insulated and
non-insulated solderless terminals and
connectors.
• Plastic-dipped, cushioned handles.
Part No. Description
1005 Crimping/Cutting Tool
Crimping/Cutting Tool -
Non-Insulated Terminals
• Accommodates wire from #10 to #22 AWG.
• Designed for crimping non-insulated
solderless terminals and connectors.
• Specially hardened wire cutter in nose.
• Tapered nose.
• Plastic-dipped cushioned handles.
Part No. Description
1006 Crimping/Cutting Tool
NM Cable Ripper
• An easy-to-use cable ripper.
• Slits the outer jacket of Romex® cable
(all sizes) and other nonmetallic (type
NM) sheathed cable.
• Measures conductor wire guage from 6
to 14 AWG.
Part No. Description
74018 NM Cable Ripper
Cable Cutter
• Easily cuts copper and aluminum cables
up to 2/0.
• Plastic coated, high-leverage handles
• Heat-treated, heavy-duty forged steel.
• Steel handles with rubber grips.
• Made in the USA.
Part No. Description
727 Cable Cutter
Flex Splitter®
BX & Flexible Conduit Cutter
• Cut flexible metal conduit in seconds..
• Ample clearance between handle and body.
• Set conduit size for multiple cuts of the
same size conduit.
• No need to reset.
• Set blade adjustment with only a screwdriver.
• Convenient in-handle blade storage -
holds up to five spare blades.
Part No. Description
1940 Flex Splitter® Flexible Metal
Conduit Cutter
1941-1 Single Blade replacement
1941-5 Replacement Blades - 5 pack
Cable Splicer’s Knife
• Special-purpose short blade (1¾") with com-
fortable, full-sized (4½"), heavy-duty handle.
• Textured handle for comfort & firm grip.
Part No. Description
44200 Cable Splicer’s Knife
ROCUT® Professional
Plastic Pipe Shears
42TC (for up to 1-5/8")
• For precise cutting of PVC, PP, PE, PEX,
PB, and PVDF pipes up to 1-5/8" dia
• Rubber handle. Lockable lever.
• Wide pipe support: precise, right-angled cut.
• Stainless steel double-sided blade with
V-edge.
Part No. Description
52000 PVC Cutter for up to 1-5/8"
50TC (for up to 2")
• Plastic pipe shears for precise cutting of
PVC, PP, PE, PEX, PB, and PVDF pipes
up to 2" diameter
Part No. Description
52010 PVC Cutter for up to 2"
75TC (for up to 3")
• Plastic pipe shears for precise cutting of
PVC, PP, PE, PEX, PB, and PVDF pipes
up to 3" diameter.
Part No. Description
52015 PVC Cutter for up to 2"
75TC
52015
50TC
52010
42TC
52000
393
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE CUTTERS
Standard Cable Cutters
• Lightweight, efficient, shear-type cable
cutters.
• Replaceable hook-jaw blades grab and
hold cable while shear-cutting action
makes clean cuts.
• Exceptionally strong fiberglass handles
with heavy vinyl grips for comfort and
slip resistance.
• Heavy-duty pins in head serve as blade-stops.
• Jaws are forged tool steel with black-oxide
finish for long life.
• Beveled tips assure positive mating,
hinged on a rugged bolt with a pin-set
nut to maintain proper blade tension.
• Make a clean, even cut for ease in fitting
lugs and terminals.
• Not designed for cutting steel or ACSR.
Part No. Description
63041 25" Cable Cutter, Maximum
cable cutting capacity: 500
MCM Copper, 750 MCM
Aluminum
63045 32" Cable Cutter, Maximum
cable cutting capacity: 1000
MCM Copper, 1200 MCM
Aluminum
63081 Repl. Cutter Head for 63041
63090 Repl. Cutter Head for 63045
EHS Guy Wire Cutter
• Cuts ½" Extra High Strength (EHS) and
standard guy wire.
• Cuts ½" mild steel rods and bolts.
• Has two cutting actions - single motion
cutting for small cable. Ratchet action for
heavy-duty cutting.
• Anti-slip mechanism for positive ratchet
action.
• Length - 27¾"; Weight - 10 lb 12 oz.
Part No. Description
758 EHS Guy Wire Cutter
Economy Cable Cutter
• Economical, lightweight, fits easily into
toolboxes.
• Adjustable pivot bolt provides for blade
adjustment.
• Heat-treated, precision ground blades.
• Steel handles with rubber grips.
• Made in the USA.
Specifications
Copper Aluminum
Max. Use 350 MCM –
Freq. Use 4/0 350 MCM
Length 18"
Weight 2.78 lbs.
Part No. Description
718 18" HD Cable Cutter
Heavy-Duty Ratchet Cable Cutter
• Extra thick blades, ground flat to reduce
potential for breakage.
• Ratchet action for heavy-duty cutting.
• Two cutting actions - fast scissor cutting
for small cable and insulation; converts
automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet
action.
• Rubber boot protects ratchet mechanism.
Specifications
Copper Aluminum
Max. Use 1500 MCM 1500 MCM
Freq. Use 1000 MCM 1000 MCM
Length 27½"
Jaw Opening: 2"
Weight 11.41 lbs.
Part No. Description
756 Heavy-Duty Ratchet Cable
Cutter
Ratchet ACSR/Cable Cutter
• Extra thick blades, ground flat to reduce
potential for breakage.
• Ratchet action for increased cutting power.
• Two cutting actions - fast scissor cutting
for small cable; converts automatically to
ratchet mode.
• Anti-slip mechanism for positive ratchet
action.
• Rubber boot protects ratchet mechanism.
• Capacity: 954 MCM ACSR, ½" soft steel
rod; Length - 29¼"; Weight - 12.22 lb.
Part No. Description
757 Ratchet ACSR/Cable Cutter
Heavy-Duty Cable Cutters
• Strong, lightweight fiberglass handles.
• Adjustable pivot bolt for blade adjustment.
• Replaceable, forged, heat-treated and
precision ground blades.
• Made in the USA.
704 Specifications
Copper Aluminum
Max. Use 350 MCM 500 MCM
Freq. Use 250 MCM 350 MCM
Length 21"
Weight 3.01 lbs.
705 Specifications
Copper Aluminum
Max. Use 500 MCM 1000 MCM
Freq. Use 350 MCM 750 MCM
Length 25½"
Weight 5.5 lbs.
706 Specifications
Copper Aluminum
Max. Use 750 MCM 1000 MCM
Freq. Use 500 MCM 750 MCM
Length 31½"
Weight 6.2 lbs.
Part No. Description
704 21" HD Cable Cutter
705 25½" HD Cable Cutter
706 31½" HD Cable Cutter
705
706
704
394 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CABLE CUTTERS
Ratcheting Cable Cutter
• Cleanly cuts copper up to 400 MCM, as
well as aluminum and multi-conductor
cables up to 600 MCM.
• Unique ratchet action holds cable tight
and allows rapid, straight cuts with mini-
mum effort.
• Hold-open spring speeds cutting action.
• Quick-release lever opens blade at any-
time during operation.
• Large, finger-formed handles have limit
guards and plastic covering for comfort.
• Compact, lightweight tool can be locked
in closed position for pouch carrying.
• Not designed for cutting steel or ACSR.
Part No. Description
63060 Ratcheting Cable Cutter
High Performance
Ratchet Cable Cutters
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• No more pushing on stubborn release
buttons-the blades open automatically
when the cut is complete.
• Completely new ratchet mechanism im-
proves durability.
• Narrow profile permits use in deep boxes,
against walls, or on floors.
• Durable, lightweight fiberglass handles..
Specifications
773 Specifications
Copper Aluminum
Max. Use 500 MCM 795 MCM
Freq. Use 350 MCM 750 MCM
Communications Cable: 13⁄16" dia.
Length 15½"
Weight 5.3 lbs.
774 Specifications
Copper Aluminum
Max. Use 750 MCM 795 MCM
Freq. Use 500 MCM 750 MCM
Communications Cable: 13⁄16" dia.
Length 191⁄8"
Weight 5.8 lbs.
Part No. Description
773 High Performance Ratchet
Cable Cutter
774 High Performance Ratchet
Cable Cutter
Compact Ratchet Cable Cutters
• Simple, one-hand operation.
• Compact - convenient for working in tight
places and stores easily in tool pouches.
• Single speed ratchet mechanism.
• Blade release allows blades to be opened
in mid-cut.
• Heavy-duty blades provide long life.Speci-
fications
759 Specifications
Copper Aluminum
Max. Use 500 MCM 750 MCM
Freq. Use 400 MCM 600 MCM
Communications Cable: 11⁄8" dia.
Length 10½"
Weight 1.4 lbs.
760 Specifications
Copper Aluminum
Max. Use 1000 MCM 1000 MCM
Freq. Use 750 MCM 1000 MCM
Communications Cable: 1¾" dia.
Length 11¾"
Weight 5.5 lbs.
Part No. Description
759 Compact Ratchet Cable Cutter
760 Compact Ratchet Cable Cutter
759
760
Performance
Ratchet Cable Cutters
• Simple, one-hand operation.
• Two-speed ratchet mechanism adjusts for
light/heavy cutting.
• Well-suited for tight work spaces.
• Specially designed blade improves cutting
capacity.Specifications
45206 Specifications
Copper Aluminum
Max. Use 600 MCM 600 MCM
Freq. Use 500 MCM 500 MCM
Communications Cable: 13⁄8" dia.
Length 10"
Weight 1.5 lbs.
45207 Specifications
Copper Aluminum
Max. Use 750 MCM 1000 MCM
Freq. Use 600 MCM 750 MCM
Communications Cable: 2" dia.
Length 191⁄8"
Weight 5.8 lbs.
Part No. Description
42056 Performance Ratchet Cable
Cutter
42057 Performance Ratchet
Cable Cutter
45207
45206
63060
Wire Rope and Wire Cutters
• Cuts small diameter wire rope & wire
• Heavy-duty forged steel blades and handles
• Heat treated, precision ground, shear ac-
tion cutting blades
• Cushioned handle grips.
Part No. Description
722 Wire Rope Cutter
395
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE CUTTERS / BATTERY POWERED CABLE CUTTERS
Specifications
Capacity: 500 kcmil Cu or Al cable.
Length 15.75"
Weight 4.4 lbs.
Battery 18V Li-Ion
Part No. Description
ES32-11 Battery-Powered Cable
Cutter, 120V charger
ES32-12 Battery-Powered Cable
Cutter, 12V charger
ES32-22 Battery-Powered Cable
Cutter, 230V charger
• Small, light weight, ergonomic shape.
• Cutting blades automatically open when
the cut is complete.
• Cutting head rotates 350 degrees for ac-
cess to tight spaces.
• Tool completes approximately 80 cutting
cycles per battery charge.
• Hardened blades provide long life.
• Includes two batteries, carrying case, and
battery charger.
Gator™ Battery-Powered
Cable Cutter
ES32-11
• Ram automatically retracts after the cut is
complete. No need to push a retract lever.
Tool is automatically ready to perform the
next cut.
• Two-speed pump advances the ram
quickly to start the cut.
• Cutting blades are specially hardened and
precision ground to hold their sharpness.
• Lightweight and easy to use.
• Cutting head rotates 360° for making cuts
in tight locations, and flips open to make
mid-span cuts easy.
• Includes one-hour battery charger, steel
carrying case and two batteries.
• Choice of a 120 volt, 230 volt, or 12 volt
battery charger.
(Corded models available.
Please call for details)
Specifications
Capacity: 2" diameter Copper or
Aluminum cable.
Length 15.75"
Height 14.25"
Weight 10 lbs.
Battery 18V 3.0 Ah, Li-Ion
Part No. Description
ESG50GL11 Battery-Powered Cable
Cutter, 120V charger
ESG50GL12 Battery-Powered Cable
Cutter, 12V charger
ESG50GL22 Battery-Powered Cable
Cutter, 230V charger
Gator-Plus™ Battery-Powered Cable Cutters
ESG50GL
High Performance Communications Cable Cutter
• Durable, lightweight, fiberglass handles.
Specifications
Capacity: 3 3/8" (86 mm) dia. com-
munications cable (1800
pair X 24 AWG) Not for
use with electrical power
cable or cables with steel
strands.
Length 18.3"
Weight 6.3 lbs.
Part No. Description
778 High Performance Communi-
cations Cable Cutter
778
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• No more pushing on stubborn release but-
tons - the blades open automatically when
the cut is complete.
• Blades can be opened easily in mid-cut if
repositioning is necessary.
• The short length and high-ratio ratchet
mechanism are especially useful in tight
locations.
• Complete new ratchet mechanism im-
proves durability.
• Wide opening scissor-style blades make it
easy to get around large cables.
High Performance ASCR Cable Cutter
Specifications
Capacity: Cuts ACSR through 636
kcmil with steel core diam-
eters less than 0.32" dia.
Specifically cuts:
All 336.4 and Smaller
SCSR; 397.5 - Brant,
Chickadee, lbis; 477.0
- Pelican, Flicker, Hawk;
556.5 - Osprey, Parakeet;
605.0 - Peacock; 636.0 -
Kingbird, Swift, Rook
Length 20"
Weight 6.2 lbs.
776
• Two-speed mechanism saves cutting time
by closing the blades rapidly and shifting
to normal speed to perform the cut.
• Patented mechanism opens the blades
automatically when the cut is complete.
• Completely new ratchet mechanism pro-
vides excellent durability.
• Short length fits easily into truck bins.
• Durable, lightweight fiberglass handles.
Part No. Description
776 High Performance ASCR Cable
Cutter
396 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BATTERY POWERED CUTTERS
Greenlee Exclusive Multipurpose Tools
Get more for your money and carry fewer tools – with CCX. This
advanced line of multipurpose tools is designed to work with a
wide variety of cutting blades and crimping die adapters, and a
knockout punch adapter. Buy just one tool for countless electrical
construction and maintenance jobs.
Choose between the 6-ton & 12-ton CCX systems.
6-ton tools.
When used with Greenlee KC22 and KA22 dies in combination with
Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-
Union® and Thomas & Betts® color-coded connectors, connections
up to 600 kcmil (copper) and 350 kcmil (aluminum) are UL and cUL
classified. These tools also accept Greenlee, Burndy®, Kearney®,
Blackburn®, Panduit® and Thomas & Betts® dies used for 6-ton
tools. They can drive knockout punches up through 2" diameter.
12-ton tools.
When used with Greenlee KC12 dies in combination with Ander-
son®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-
Union® and Thomas & Betts® copper color-coded connectors,
crimps on copper lugs up to 750 kcmil are UL and cUL classified.
When used with Greenlee KA12 dies in combination with Ander-
son®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union®
and Thomas & Betts® aluminum color-coded connectors, crimps
on aluminum lugs up to 750 kcmil are UL and cUL classified. The
tools also accept all industry “U" type dies. These tools drive
knockout punches up through 55⁄8" diameter.
* Both tool groups have the same cutting capabilities. The products listed above are
registered trademarks of Anderson®, Blackburn®, FCI Burndy®, Kearney®, ILSCO®,
Huskie®, Panduit®, Penn-Union® and Thomas & Betts®.
ETS8L Cable Tray Cutter
• Cuts cable tray wires in 2 seconds.
• Cutting head is small and rotates 330° to easily get into the
right cutting position.
• Tool automatically retracts when a cut is complete, but it can be
retracted in mid-stroke if necessary.
• Makes flush cuts without burrs.
• Comes complete with 2 batteries, battery charger, and carrying
case.
• Available with 120 volt, 12 volt, or 230 volt battery charger.
Specifications
Capacity: 750 kcmil Cu or 1000 kcm Al cable.
Length 12.75"
Weight 3 lbs.
Battery 18V 3.0 Ah Li-Ion; 45 min. charge time
Cutting Capacities
Material 1/16" 1/8" 3/16" 1/4" 5/16"
Cable Tray • • • • •
(Mild Steel, Zinc Plated)
Cable Tray • • • •
(Stainless Steel)
Threaded Rod • • • • •
Threaded Rod • • • • •
(Stainless Steel)
Steel Bolts • • • • •
(Grade 2)
Steel Bolts • • •
(Grade 8)
Copper/Alum • • • • •
Part No. Description
ETS8L-11 Battery-Powered Cable Tray Cutter, 120V charger
ETS8L-12 Battery-Powered Cable Tray Cutter, 12V charger
ETS8L-22 Battery-Powered Cable Tray Cutter, 230V charge
• Compact design permits use in tight locations.
• Extra heavy blades for clean cuts and
long life.
• Makes approximately 20 cuts in 750
kcmil per battery charge.
• Easy to switch between forward and
reverse direction.
• Includes battery charger, one battery
and molded carrying case.
Specifications
Capacity: 750 kcmil Cu or 1000 kcm
Al cable.
Length 15.75"
Weight 4 lbs.
Battery 9.5V NiCad
Part No. Description
ES750-11 Battery-Powered Cable
Cutter, 120V charger
ES32-22 Battery-Powered Cable
Cutter, 12V charger
Gator™ ES750
Battery-Powered Cable Cutter
ES750-11
ETS8-11
397
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE TERMINATION
E12CCXL and ECCXXL Tool Capacities
Crimping Cutting Punching
Copper Color-Coded Lugs and Splices: 750 kcmil Copper and Aluminum Cable: 1½" Round: 5
5/8" in 10 ga. mild steel
Aluminum Color-Coded Lugs and Splices: 750 kcmil ACSR: 954 kcmil (Cardinal) Rectangular: 2.677" x 5.433"
5/8" Service Entrance Connectors: 10-1/0 AWG Standard Guy Strand: 5/8" Square: 5.4333" x 5.433"
.840 Service Entrance Connectors: 1/0-4/0 AWG EHS Guy Strand: ½" Accessories required to punch 4½" through 5
5/8"
Aluminum Overhead “H” taps: 6 AWG-500 kcmil Ground Rod: ½" 12185 Spacer, 04686 Bushing and 03170 Sleeve
One Piece ACSR Tension Splices: 4 AWG-556.5 kcmil Rebar (schedule 60): ½"
Two Piece ACSR Tension Splices: 2 AWG-556.5 kcmil Threaded Rod: ¼", 3/8", ½", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
E12CCXL and ECCXXL Tool Capacities
Crimping Cutting Punching
Copper Color-Coded Lugs and Splices: 600 kcmil Copper and Aluminum Cable: 1½" Round: 2.42" in 10 ga. mild steel
Aluminum Color-Coded Lugs and Splices: 300 kcmil ACSR: 954 kcmil (Cardinal) (requires no accessories)
5/8" Service Entrance Connectors: 10-1/0 AWG Standard Guy Strand: 5/8"
.840 Service Entrance Connectors: 1/0-4/0 AWG EHS Guy Strand: ½"
Aluminum Overhead “H” taps: 6-4/0 AWG Ground Rod: ½"
One Piece ACSR Tension Splices: 4-1/0 AWG Rebar (schedule 60): ½"
Two Piece ACSR Tension Splices: 2-4/0 AWG Threaded Rod: ¼", 3/8", ½", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
Part No. Description
E12CCXL11 Battery-powered 12CCXL w/120V charger
E12CCXL12 Battery-powered 12CCXL w/12V charger
E12CCXL22 Battery-powered 12CCXL w/230V charger
E12CCXL120 Corded 12CCX, 120V, 60 Hz
E12CCXL230 Corded 12CCX, 230V, 50 Hz
Part No. Description
ECCXL11 Battery-powered CCXL tool, 120V charger
ECCXL12 Battery-powered CCXL tool, 12V charger
ECCXL22 Battery-powered CCXL tool, 230V charger
ECCXL120 Corded CCX Tool, 120V, 60 Hz
ECCXL230 Corded CCX Tool, 230V, 50 Hz
Gator-Pro™ Battery-Powered & Corded CCX Tools
Battery-Powered and Corded Tool Features:
• 350° rotating head adjusts to your work position.
• Lightweight, plus ergonomic-angled handle for comfortable, low-
stress use.
• Cycle in seconds with two-speed hydraulic pump, maximizing
productivity.
• Automatic retraction when crimping and cutting cycles are complete.
• Use optional CCX blades and adapters.
Battery-Powered Tool Features:
• Lithium Ion battery (Li-Ion) delivers up to 400 cycles per charge
with the ECCXL and 130 cycles per charge with the E12CCXL.
• Includes two batteries, a choice of either a 120V, 12V or 230V
one-hour charger, and a high-impact molded carrying case.
Corded Tool Features:
• Operates directly from 120V 60Hz or 230V 50Hz electrical outlets.
• No need to charge batteries or worry about running out of power.
• Equipped with 15' cord. Can be used with extension cord.
• Includes a high-impact molded carrying case.
Crimp
Punch
Cut
Quick Release
latch makes it easy
to get around cables Two Speed Ram
provides fast cycle times
Head Rotates 350° for
easy access to any area.
Automatically Retracts
when cycle is complete
or by pressing this
button anytime during
a cycle
Li-Ion Battery
E12CCXL provides
approximately 130
cycles per charge
ECCXL provides
approximately 400
cycles per charge
Specifications E12CCXL ECCXL
Crimping Force 24,000 lb. 12,000 lb.
Length 161⁄8" 14¾"
Height 13" 121⁄8"
Weight 14 lbs. 10.5 lbs.
Battery 18V, 3.0 Ah, Li-Ion 18V, 3.0 Ah, Li-Ion
Charge Time 1 hour 1 hour
Specifications E12CCXL ECCXL
Crimping Force 24,000 lb. 12,000 lb.
Length 161⁄8" 14¾"
Height 13" 121⁄8"
Weight 14 lbs. 10.5 lbs.
Voltage EC12CCXL120 (120VAC) ECCXL120 (120VAC)
EC12CCXL230 (230VAC) ECCXL230 (230VAC)
398 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CCX TOOL ACCESSORIES
CCX Tool Accessories
(optional, all in pairs except punch driver)
Die Adapters
Part No. Description ECCX E12CCX
UA22 Adapter for Greenlee K22 dies X
UAK Adapter for Kearney “0”, X
T&B “6 Ton”, & Blackburn
“OD” dies
UAW Adapter for Burndy “W” & X
Panduit “CD-2001” dies
(equivalent to “D3” die)
UA12T Adapter for “U” dies X
(included with tool)
Cable Cutting Blades
Part No. Description ECCX E12CCX
UC26 Cutter Blades AL & CU 1" X X
UC40 Cutter Blades AL & CU 1½" X X
UCACSR Cutter blades for ACSR X X
& guy strand
Threaded Rod Cutting Blades
Part No. Description ECCX E12CCX
UCUNC14 Cutter blades, ¼" threaded rod X X
UCUNC38 Cutter blades, 3⁄8" threaded rod X X
UCUNC12 Cutter blades, ½" threaded rod X X
UCM5 Cutter blades, M5 threaded rod X X
UCM6 Cutter blades, M6 threaded rod X X
UCM8 Cutter blades, M8 threaded rod X X
UCM10 Cutter blades, M10 threaded rod X X
Din Rail Cutting Blades
Part No. Description ECCX E12CCX
UCD3575 Cutter blades – 35 x 7.5 X X
UCD3215 Cutter blades – 32 x 15 x 9 X X
UCD3515 Cutter blades – 35 x 15 X X
UPD6 DIN Rail Punch (punches X X
15 mm x 6.2 mm hole in
35 x 7.5 & 35 x 15 DIN rail)
Knockout Punch Adapter
Part No. Description ECCX E12CCX
UA12P Punch Driver Adapter* X X
(accepts ¾" draw stud)
UA12T Adapters
for “U” dies are included with
E12CCX and C12CCX tools
UA22
UCUNC38
UC40
UA12P
HCCX Hand-Powered 6-Ton Hydraulic Tool
• 360° rotating head – comfortable to use at any jobsite.
• Lightweight, compact size makes it easy to carry and easy to use.
• Two-speed hydraulic pump for short cycle time.
• Automatic retraction when crimping and cutting cycles are complete.
• Includes a carrying case with spaces for blades and adapters.
• Uses all optional CCX blades and adapters.
Specifications
Crimping Force: 12,000 lbs
Length: 20.75"
Weight: 8 lbs.
Part No. Description
HCCX Hand-Powered Hydraulic CCX tool
RCCX Remote-Powered 6-Ton Hydraulic Tool
• Operates with standard, 10,000 psi (700 bar) hydraulic pumps.
• 3⁄8" male screw-type coupler, operating pressure 10,000 psi.
• Includes a carrying case with spaces for blades and adapters.
• Uses all optional CCX blades and adapters.
Specifications
Crimping Force: 12,000 lbs
Length: 11.875"
Weight: 5.2 lbs.
Part No. Description
RCCX Remote-Powered Hydraulic CCX tool
Note: Not compatible with UA12T Adapter
399
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CABLE TERMINATION
EK12IDL 12-Ton Battery Dieless Crimping Tool
• Two-speed pump advances the ram quickly to start the crimp. The
ram automatically retracts after the crimp is complete.
• Lightweight, angled pistol grip and a 350° rotating head.
• Flip open crimping head will allow crimping of 4 AWG – 1000 kcmil
copper or 6 AWG – 1000 kcmil aluminum* with no dies to change.
• Dieless indent style crimping head does not require interchangeable
crimping dies.
• Includes two batteries, battery charger, carrying case, test gauge and
test slugs.
• Choice of a 120 volt, 230 volt, or 12 volt one-hour battery charger.
Specifications
Length: 16 7⁄8"
Height: 14¾"
Weight: 14½ lb.
Battery: 18 V, 3.0 Ah, Li-Ion
Battery Charge Time: 1 hour
Part No. Description
EK12IDL11 Battery-Powered Dieless Crimping Tool, 115 V
Battery Charger
EK12IDL12 Battery-Powered Dieless Crimping Tool, 12 V
Battery Charger
EK12IDL22 Battery-Powered Dieless Crimping Tool, 230 V
Battery Charger
Flip Open Crimping Head
will allow crimping of 4 AWG - 1000 kcmil Cu and
6 AWG - 1000 kcmil Al with no dies to change.
Two Speed Pump
provides rapid crimping cycle time.
Dieless Indent
style crimping head does
not require interchangeable
crimping dies
Crimping Head Rotates
350° to get into tight locations
Automatically Retracts
when cycle is complete
or by pressing this button
anytime during a cycle
Ergonimically Angled
handle provides good balance
18V 3.0 Ah Ni-MH Battery
provides many crimping cycles per charge
*UL and cUL classified with Anderson®, Blacburn®, Burndy®, ILSCO®, Panduit®,
Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors. The products listed
above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts® and Tyco®
Dieless Crimping Tool to 1000 kcmil (MCM)
• Dieless crimping head; no dies to lose or replace.
• Patented pressure system automatically changes crimping force for
each connector size/type. Eliminates errors.
• Seven indent profile requires fewer crimps per connector.
• Automatic two-speed pump for rapid advance.
• 15 ton maximum crimping force.
• Swivel head rotates 180° for maximum flexibility.
• Hinged head for easy connector loading and unloading.
• Includes Pressure Test Kit and carrying case.
• Not for use with “C” and “H” taps.
EK628 6-Ton Battery Crimping Tool
• Slim profile & light weight permit one hand operation.
• Crimping jaws automatically open to signal that
crimp is complete.
• Crimping jaws can be opened in mid-cycle to
adjust connector.
• Interchangeable crimping jaws rotate 350°
• Two batteries, battery charger and molded carrying
case are included.
• Choice of 120V, 12V, or 230V battery charger.
• UL & cUL classified from 8 AWG to 600 kcmil with
Anderson, Blackburn®, Burndy, ILSCO, Panduit,
Thomas & Betts, and Penn-Union copper code color-
coded connectors when used with Greenlee KC22
crimping dies; to to 350 kcmil with Anderson, Black-
burn®, Burndy, ILSCO, Panduit, Thomas & Betts, and
Penn-Union aluminum code color-coded connectors
when used with Greenlee KA22 crimping dies.
• When equipped with CJD3 crimping jaws, can be
used with all industry “W” style crimping dies.
• When equipped with CJK crimping jaws, can be used with
Thomas & Betts “6Ton” crimping dies.
Specifications
Crimping Force: 6 tons
Length: 18 ½"
Width (jaws open): 4¼"
Weight: 6.0 lbs.
Battery: 18 Volt, 3.0 Ah Li-Ion
Crimp Cycle Time: 6 seconds
Battery Charge Time: 1 hour
Part No. Description
EK628L11 Crimping tool w/120 V battery charger
EK628-DL12 Crimping tool w/12 V battery charger
EK628-DL22 Crimping tool w/230 V battery charger
CJD3 Crimping jaw unit- “W” dies
CJK Crimping jaw unit- Thomas & Betts “6-Ton” dies
Specifications
Capacity: Copper #4 AWG - 1000 kcmil
Aluminum #6 AWG - 1000 kcmil*
Length: 26.5"
Weight: 16.5 lbs.
Part No. Description
1990 Dieless Crimping tool to 1000 kcmil
32891 Replacement Pressure Test Kit, includes 30
test slugs and gauge
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®,
Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors. The products listed
above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts® and Tyco®
400 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CRIMPING DIES
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
“U” Series Crimping Dies
Aluminum Copper
Cable Size Cat. No. Color Cat. No. Color
8 AWG 35576 Blue KC12-8 Gray
6 AWG 35577 Gray KC12-6 Blue
4 AWG 35579 Green KC12-4 Gray
2 AWG 35580 Pink KC12-2 Brown
1 AWG 35791 Gold KC12-1 Green
1/0 AWG 35792 Tan KC12-1/0 Pink
2/0 AWG 35793 Olive KC12-2/0 Black
3/0 AWG 35794 Ruby KC12-3/0 Orange
4/0 AWG 35785 White KC12-4/0 Purple
250 kcmil 35786 Red KC12-250 Yellow
300 kcmil 35787 Blue KC12-300 White
350 kcmil 35788 Brown KC12-350 Red
400 kcmil 35789 Green KC12-400 Blue
500 kcmil 35795 Pink KC12-500 Brown
600 kcmil 35790 Black KC12-600 Green
750 kcmil 35796 Yellow KC12-750 Black
*Note: Connections are UL and cUL classified for copper and aluminum, when used
with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®,
Thomas & Betts® and Penn-Union® color-coded lugs and splices.
Dies for use with Service Entrance Connectors, C-Taps, H-Taps,
Overhead & Underground Connectors
Additional “U” Series Crimping Dies
Cat. No. Burndy No. Cat. No. Burndy No.
KD12-10 U-BG KD12-30 U-D3
KD12-11 U-O KD12-31 U-E
KD12-12 U-C KD12-32 U-F
KD12-14 U-161 KD12-33 U-997
KD12-15 U-162 KD12-35 U-238
KD12-16 U-163 KD12-36 U-654
KD12-17 U-165 KD12-37 U-655
KD12-18 U-166 KD12-38 U-658
KD12-19 U-243 KD12-39 U-659
KD12-20 U-247 KD12-40 U-998
KD12-21 U-249
Crimping Dies for 12-Ton Tools
• All dies on this page for use with 12-Ton Crimping Tools.
• Includes steel carrying case.
Part No. Description
K22S1GL Die Kit for #6-750 Copper Connectors -
Includes all copper die sets listed below except
KC12-8
KD06AL Die Kit for #8-600 Aluminum Connectors -
Includes all Aluminum die sets listed below
except #35776
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
(Requires UA22 adapter when used with CCX tools)
22 Series Crimping Dies
Aluminum Copper
Cable Size Cat. No. Color Cat. No. Color
8 AWG KA22-8 Blue KC22-8 Red
6 AWG KA22-6 Gray KC22-6 Blue
4 AWG KA22-4 Green KC22-4 Gray
2 AWG KA22-2 Pink KC22-2 Brown
1 AWG KA22-1 Gold KC22-1 Green
1/0 AWG KA22-1/0 Tan KC22-1/0 Pink
2/0 AWG KA22-2/0 Olive KC22-2/0 Black
3/0 AWG KA22-3/0 Ruby KC22-3/0 Orange
4/0 AWG KA22-4/0 White KC22-4/0 Purple
250 kcmil KA22-250 Red KC22-250 Yellow
300 kcmil KA22-300 Blue KC22-300 White
350 kcmil KA22-350 Brown KC22-350 Red
400 kcmil — — KC22-400 Blue
500 kcmil — — KC22-500 Brown
600 kcmil — — KC22-600B Green
*Note: Connections are UL and cUL classified for copper and aluminum, when used
with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®,
Thomas & Betts® and Penn-Union® color-coded lugs and splices.
Dies for use with Service Entrance Connectors, C-Taps, H-Taps,
Overhead & Underground Connectors
(Requires UAW adapter when used with CCX tools, Requires
CJD3 jaw when used with EK628 tools)
“W” -Style Dies
Cat. No. Burndy No. Cat. No. Burndy No.
KD6-10 W-BG KD6-18 W-166
KD6-11 W-O KD6-19 W-243
KD6-12 W-C KD6-20 W-247
KD6-13 W-K840 KD6-21 W-249
KD6-14 W-161 KD6-22 W-164
KD6-15 W-162 KD6-24 W-237
KD6-16 W-163 KD6-25 W-239
KD6-17 W-165 KD6-27 W-28K
Crimping Dies for 6-Ton Tools
• All dies on this page for use with 6-Ton Crimping Tools.
• Includes steel carrying case.
Part No. Description
K22S1GL Die Kit for #8-600 Copper Connectors -
Includes all copper die sets listed below
KD06AL Die Kit for #8-600 Aluminum Connectors -
Includes all Aluminum die sets listed below
KD6
KC22
401
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TEST & MEASUREMENT INSTRUMENTS
12V Li-Ion M-Spector™
Digital Inspection Cameras
• Crystal clear, 2.4" high-resolution, color
display.
• Exclusive image zoom (2X) and LED
brightness control.
• Durable, detachable, 3' water-tight flex-
ible cable and a small camera head fits
through holes as small as 3/4".
• Extension camera cables available to
extend reach of camera.
• One-handed operation.
• 15 hour run-time.
• Also available in 4-AA battery configuration
or tool only.
• KIT Includes 3' Camera Cable, Battery,
Charger and Carrying Case.
2310-22 Specifications
Volts: 12 V DC
LCD Display: 2.4" Hi-Res Color
Camera Head Dia.: 0.7" (17mm)
Image Zoom: 2X
LED Brightness Adjust: (3X) Control
Cable Length 3'
Part No. Description
2310-22 M-Spector™ Digital Camera Kit
2300-20 M-Spector™ Digital Camera Kit
4-AA Batteries, (does not in-
clude 12V Battery or Charger)
2310 / 2300 Accessories
Part No. Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0115 Replacement Camera Cable
2310-22
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for auto-
motive applications.
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommend-
ed maximum extension is 19')
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
2310-22 Specifications
Volts: 12 V DC
LCD Display: 3.5" Hi-Res Color
Camera Head Dia.: 0.7" (17 mm)
Adj. Image Zoom: 4X
LED Brightness Adjust: (4X) Control
Cable Length 3'
Part No. Description
2311-21 M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
2312-21 M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
2311 Accessories
Part No. Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
2311-21
12V Li-Ion SUB-SCANNER™
Detection Tool Kit
A heavy duty pistol grip detection tool
for professional, commercial and indus-
trial applications. Detects rebar up to 6"
deep in concrete, as well as the location
and depth of materials beneath gypsum,
OSB, ceramic tile and marble. Four wheel
design for durability and smooth, accurate
measurement.
FEATURES:
• Measures depth and location of rebar up
to 6” through concrete
• Detects location of wood, PEX, PVC, and
metal
• Differentiates between steel (ferrous) and
copper or aluminum (non-ferrous) metals
• Embedded AC voltage detection to iden-
tify the location of live wires
• Intuitive user interface displays stud
centers and edges
• High contrast white on black display and
backlight for easy reading
• Rugged over-molding improves durability
and user grip
• Auto-calibration for all surfaces
• KIT Includes Battery, Charger &
Carrying Case.
2290-21 Specifications
Volts: 12 V DC
Detection depths of various materials:
Wood/Metal Stud: 1-1/2 inches
Plastic: 3 inches
Ferrous Metal: 6"
Non-Ferrous Metal: 6"
Position Accuracy:
Wood: 1/4"
Non-Ferrous: 1/2"
Ferrous: 1/2"
Scan for AC Electrical: Yes
Display Resolution: 0.5"
Backlight: Yes
Non-Contact Voltage: Yes
Indication: Visual (for NCVD)
Part No. Description
2290-21 Detection Tool Kit
2290-20 Detection Tool, Tool Only
2290-21
Rechargeable Test and Measurement Instruments
402 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TEST & MEASUREMENT INSTRUMENTS
Rechargeable Test and Measurement Instruments
12V Li-Ion
Clamp Meters
A True-RMS current tester for pro-
fessional commercial and industrial
applications. The clamp meters feature
an ergonomic pistol grip design greatly
increasing comfort and ease-of-use
in overhead applications. The units
also provide wide 1.30 or 1.57" jaw
openings to easily handle very large
conductors, a thin jaw profile for access
to tight spaces, a large white on black
display, embedded non-contact voltage
detection, and embedded extra bright
LED floodlight.
HVAC/R CLAMP-GUN™ Clamp Meter Kit 2238-21
• Large jaw size of 1.30" measuring up to 750 MCM cable
• CAT IV 600V / CAT III 1000V for greater safety
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(Dual Banana), Carrying Case and Manual
2238-21 Specifications
TRMS: YES Voltage AC/DC: 1000V
Safety Rating: CAT IV 600V/ Contact Temp: -40° F to 1000°F
CAT III 1000V Resistance: 600 kOhms
Current AC: 600A LED Light: YES
Microamps: 600µA
Part No. Description
2238-21 12V Li-Ion HVAC/R Clamp Meter Kit
2238-20 12V Li-Ion HVAC/R Clamp Meter, Bare Tool ONLY
CLAMP-GUN™ Clamp Meter Kit 2239-21
• Extra-large jaw size of 1.57" measuring up to 1000 MCM cable
• In-rush current measurement for motor starts
• Extra bright LED flood light and built-in voltage detection
• KIT Includes Battery, Charger, Test Lead Set, Carrying Case,
and Manual
2239-21 Specifications
TRMS: YES Voltage AC/DC: 1000V
Safety Rating: CAT IV 600V/ Contact Temp: -40° F to 1022°F
CAT III 1000V Resistance: 600 kOhms
In-Rush Current: 100mS LED Light: YES
Part No. Description
2239-21 12V Li-Ion Clamp Meter Kit
2239-20 12V Li-Ion Clamp Meter, Bare Tool ONLY
12V Li-Ion Thermometers
A heavy duty pistol grip infrared thermometer
for professional, commercial and industrial
applications. Powered by the Milwaukee M12
Lithium Ion battery, LASER-TEMP GUNs™ can
safely measure temperatures between -22 to
1472° F with a 40:1 distance to spot ratio for
even the most demanding industrial applica-
tions. Designed with embedded non-contact
voltage detection and an extra bright LED
Floodlight to increase end user productivity.
HVAC/R LASER-TEMP GUN™ Kit 2277-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Measures ambient humidity and dew point
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2277-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity: Adj. .10
Basic Accuracy: 1.50% Distance to Spot: 40:1
Contact Temperature: -40°F to 1022°F Data Storage: 20 points
Part No. Description
2277-21 12V Li-Ion HVAC/R LASER-TEMP GUN™ Kit
2277-20 12V Li-Ion HVAC/R LASER-TEMP GUN™, Bare Tool ONLY
LASER-TEMP GUN™ Kit 2276-21
• Infrared surface temperature measurement from -22° F to
1472° F.
• 40:1 distance to spot ratio. Measures a one-foot spot from
40 feet away.
• Unit memory stores up to 20 temperature values
• KIT Includes Battery, Charger, Test Lead Set, Thermocouple
(K-Type), Carrying Case and Manual
2276-21 Specifications
Temperature Range: -22°F to 1472°F Emissivity: 0.10 to 1.0
Contact Temperature: -40°F to 1022°F Distance to Spot: 40:1
Basic Accuracy: 1.50% Data Storage: 20 points
Part No. Description
2276-21 12V Li-Ion LASER-TEMP GUN™ Kit
2276-20 12V Li-Ion LASER-TEMP GUN™, Bare Tool ONLY
LASER-TEMP GUN™ 2266-20
• Powered by 3 AA Alkaline batteries
• Infrared surface temperature measurement
from -20° F to 932° F.
• 12:1 distance to spot ratio. Measures a
one-foot spot from 12 feet away.
• User Configurable Hi/Low Alarm Settings
• K-type thermocouple input for contact tem-
perature
• High Contrast, White on Black Display with
Backlight for easy reading
• Hold, Max Value Functions
• Slide rail for mounting 2201 Voltage Detector
• 0.95 fixed emissivity
2266-20 Specifications
Temperature Range: -22°F to 1472°F Emissivity: 0.95
Distance to Spot: 12:1 Basic Accuracy: 1.50%
Response Time: < 500 ms
Part No. Description
2266-20 LASER-TEMP GUN™ Kit
403
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TEST & MEASUREMENT INSTRUMENTS
Digital Multimeter 2217-20
A heavy duty, True-RMS meter for profes-
sional residential, commercial and industrial
applications. The perfect tool for the profes-
sional electrician, featuring rugged over-
molding for increased durability and grip, a
large white on black display for clearer read-
ings, a slide rail system to add proprietary
accessories and over-molded dial for easy
one handed use. Meets the safety specifica-
tions required by the electrical user. Covered
by Milwaukee 5-Year Warranty. Includes (2)
AA Alkaline Batteries, Test Leads Dual
Banana Thermocouple and Manual
2217-20 Specifications
Voltage Range 6mV to 600V AC/600mV to 600V DC
Safety Category Rating CAT III 600V
Temperature Range -40°F to 752°F
AC Amps 0.001-10.00A
DC Amps 0.001-10.00A
Frequency Yes
Lo-Z Yes
Hz (Amps or Volts) 9.999Hz-50.00kHZ
mV DC Same as VDC (no switch function)
Ohms 600.0 Ohm-40.00M Ohm
K-Type Thermocouple input Yes
MIN/MAX/AVG/DIF MIN/MAX
Continuity YES<30Ohms
Capacitance 0.1-1000uF
Backlight Yes
Temp Yes
Hold Yes
Bargraph Yes
Display High Contrast White on Black
Switch Type Dial
Accessory Attachment Proprietary rail system; NCVD, Magnet
Part No. Description
2217-20 Digital Multimeter
Fork Meter 2205-20
A heavy duty True-RMS electrical tester for professional residen-
tial, commercial and industrial applications. Four tools in one,
providing current measurement, voltage measurement, voltage
detection and task lighting. The fork meter provides a wide 0.63”
fork opening, high 200 amp current range and a high contrast
white-on-black display. Covered by Milwaukee 5-Year Warranty.
Includes (2) AA Alkaline Batteries, Test Leads and Manual
2205-20 Specifications
Voltage Range 1000V AC/DC
Safety Category Rating CAT IV 600V
CAT III 1000V
Fork Opening 0.63"
AC Amps 200
Lo-Z Yes
mV DC Same as VDC
(no switch function)
Ohms 600.0 Ohm-
40.00M Ohm
Continuity Yes
Capacitance No
Backlight Yes
Temp No
Hold Yes
Display White on Black
Non-Contact Voltage Yes
LED Work Light Yes
Indication Visual (for NCVD)
Switch Type Dial
Part No. Description
2205-20 Fork Meter
Clamp Meter 2237-20
A heavy duty True-RMS electrical current
tester for professional residential, commer-
cial, and industrial applications. The perfect
tool for the professional electrician, the Clamp
Meter provides a wide 1.3” jaw opening to
easily handle large conductors, a thin jaw
profile for access to tight spaces and a high
contrast white-on-black display for clearer
readings. Designed with embedded non-con-
tact voltage detection and an LED work light
to increase end user productivity. Covered by
Milwaukee 5-Year Warranty. Includes (2) AA
Alkaline Batteries, Test Leads and Manual
Part No. Description
2237-20 Clamp Meter
2237-20 Specifications
Voltage Range 600V AC/DC
Safety Category Rating CATIII 600V
AC/DC Amps 600
AC/DC Volts 600
Frequency Yes
Hz (Amps or Volts) 1 Hz-10.00kHZ
mV DC Same as VDC
(no switch function)
Ohms 6 kohms
MIN/MAX/AVG/DIF MIN/MAX
Continuity Yes
Capacitance Yes
Backlight Yes
Hold Yes
Zero Yes
Jaw Size 1.3"
Display White on Black
Non-Contact Voltage Yes
LED Work Light Yes
Indication Visual (for NCVD)
Switch Type Dial
404 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ELECTRICAL TEST INSTRUMENTS
Digital Multimeter
• Auto and manual
ranging for conve-
nient operation.
• Non-contact and
single probe volt-
age detection.
• Beep-Jack™ audible
and visible warning
to guard against
improper A and mA
terminal plug in..
• High visibility 6000
count LCD display.
• Capacitance and
temperature mea-
surement capability.
• Auto power off, display backlight, analog
bar graph.
• PC interface capability using optional
USB RS-232 cable with data recording
PC software.
Specifications
Voltage AC/DC - 60mV to 1000V
Amperage AC/DC - 600mA to 8A
Resistance: 600Ω; to 60MΩ
AC Detective
Voltage 30V-500V+
Detection Range:
Capacitance: 2.500, 25.00, 250.0nF;
2.500, 25.00µF
Frequency: 50Hz-400kHz
Measurement Cat III, 600V; Cat II, 750V
Category: AC/1000V DC
Part No. Description
DM-210A Digital Multimeter
Automatic Electrical Tester
• Hassle free, automatic measurement of amperage,
voltage, and resistance.
• Compact design for measuring in tight spaces.
• 400A AC, 600V AC/DC measurement.
• Data hold to capture important readings.
• Auto off for longer battery life.
• Accessories included: (1) 9 V battery, test
leads, carrying case.
Professional Plant
Digital Multimeter
• Autoranging
for convenient
operation.
• Record max,
min, max-min,
and average
readings and
data hold.
• Relative offset
display mode
to see relative
changes in mea-
surements.
• Frequency,
temperature,
and capacitance
measurements plus diode and continuity
tests standard.
• Auto power off and low battery indicator.
• HAR feature to measure harmonic content.
• True RMS for no-compromise accuracy.
• Accessories included: (1) 9V battery, test
leads, bead temperature probe).
Specifications
Voltage ACV - 999.9mV, 9.999,
Measurement: 99.99, 750V DCV-999.9mV,
9.999, 99.99, 999.9MV
Amperage ACA-400µA, 40.00mA,
Measurement: 10.00A; DCA-40.00,
400µA, 4.000, 40.00mA,
4.000, 10.00A
Resistance: 9.999O; 9.999, 99.99,
999.9Ω; 4.000, 40.00MΩ
Capacitance: 1.000, 10.00, 100.0µF,
1.000, 10.00MF
Frequency: .999, 99.99, 999.9Hz;
9.999, 50.00kHz
Temperature: K type, -4°F to 932°F
(-20°C to 500°C)
Measurement Cat III, 600V; Cat II, 750V
Category: AC/1000V DC per UL 3111-1
Part No. Description
DM-510 Professional Plant
Digital Multimeter
Digital Multimeter
• Autoranging,
3-5/6-digit,
5000-count
display for
greater ac-
curacy.
• Frequency and
capacitance
measurements
plus diode
and continuity
tests stan-
dard.
• Data hold to
capture mea-
surements.
• RS-232
capable, may be connected to a PC for
extended measurement capability with
optional optically-isolated interface
DMSC-8L, purchased separately.
• Low ohm range calibration, subtracts
test lead resistance.
• Backlit display for easy viewing.
• True RMS for no-compromise accuracy.
• Accessories included: (1) 9V battery, car-
rying case, test leads.
Specifications
Voltage 50.00, 500.0mV; 5.000,
Measurement: 50.00, 500.0, 1000V
Amperage 500.0, 5000µA; 50.00,
Measurement: 500.0mA; 5.000, 10.00A
Resistance: 50.00, 500.0Ω; 5.000,
50.00, 500.0kΩ; 5.000
50.00MΩ
Capacitance: 50.00, 500.0nF; 5.000
50.000, 500.00, 9999µF
Frequency: 10Hz-125kHz
Temperature: K type, -58°F to 1832°F
(-50°C to 1000°C)
Measurement
Category: Cat IV, 600V; Cat III, 1000V
Part No. Description
DM-800 Digital Multimeter
DM-820 Digital Multimeter, incl.,
Record max, min, and max-min readings.
Specifications
DC V: 1.8-600.0; -0.6 to -600.0V
Amperage 250.0, 2500µA; 25.00,
Measurement: 250.0mA; 2.500, 10.00A
Resistance: 2000Ω with continuity
beeper
Display 6000-count LCD
Jaw Opening: 1.06"
Measurement Cat III, 600V per UL 3111-1
Category: AC/1000V DC
Part No. Description
CMT-80 Automatic Electrical Tester
CMT-90 Same, to 1000V
405
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ELECTRICAL TEST INSTRUMENTS
AC Clamp-on Meter
• Both AC amperage
and AC/DC voltage
measurement.
• Resistance measure-
ment up to 2000Ω.
• Auto power off for
longer battery life.
Specifications
Voltage
Measurement: 400.0, 600V
Amperage
Measurement: 400.0, 600A,
Resistance: 2000Ω
Jaw Opening: 1.38"
Voltage Output: 10mV output/1 amp input
Display: 3-1/2 digit LCD, 2000 ct.
Measurement
Category: Cat III, 600V per UL 3111-1
Part No. Description
CM-600 AC Clamp-on Meter
Line Splitter (NEMA 5-15)
• For use with all models of clamp-on
meters.
• Splits lines for independent testing with
clamp-on meter.
Part No. Description
93-30 Line Splitter (NEMA 5-15)
1000A AC/DC True RMS Clamp Meter
• True RMS for the
most accurate mea-
surement when har-
monics are present
• AC/DC amperage, AC/
DC voltage, frequency
and resistance mea-
suring capability.
• Dual Hall sensor for
the most accurate
measurements.
• Easy to read backlit
display for use in low
light conditions.
• Peak and data hold to
capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9 V battery, test
leads, carrying case.
Specifications
Voltage AC V - 400.0, 750V
Measurement: DC V - 400.0, 1000V
Amperage
Measurement: 400.0, 1000A
Resistance: 400.0Ω
Frequency: 0.400kHz
Display: 4000 count LCD
Jaw Opening: 2.0"
Category: Cat IV, 600V; Cat III, 750V
AC/1000V DC
Part No. Description
CM-1550 1000A AC/DC True RMS
Clamp Meter
FEATURES:
• Advanced non-directional sensing technology.
• Superior sensitivity and functionality for accu-
rate tracing and locating.
• Ergonomic receiver with full-color graphical
LCD.
• Graphics and audible signal provide quick and
easy to understand tracing feedback.
• Traces concealed wiring, locates junction boxes,
and finds breakers for live or open circuits.
• Locates and identifies blown fuses.
• Finds shorts and breaks in conductors.
• Low pitch, high volume audible indicator.
• User-selectable automatic or manual gain capa-
bility for fast, convenient use.
• Power saving features promote extended battery life (Auto Power Off).
• Can be used on GFCI protected circuits.
• Supports transmitter-to-receiver distances up to 4 miles for closed circuit tracing.
• Does not affect sensitive electronic equipment on the circuit.
• Auto backlight on receiver maximizes battery life.
• Lifetime Limited Warranty.Specifications
CS-8000 Circuit Seeker™ Circuit Tracer
Specifications
Operating Conditions:
Temperature: 32° to 122° F
Altitude: 6,500 ft. maximum
Indoor Use Only
Transmitter:
Measurement
Category: Category III, 750V
Operating
Voltage: 0-750 V AC/DC
Live-Line LED: Indicates voltage > 12 VAC
or 5 VDC
Frequency: 15.15 kHz
Power: 2 AA Batteries
Low Battery Indicator
Specifications
Receiver:
Range from Receiver to Item with Signal
Strength:
Live Line Mode: Up to 20 ft. from circuit
Open Line Mode: Up to 10 ft. w/ metallic
connection to ground
1-3 ft. with capacitive
ground reference
Power: 2 AA Batteries
Low Battery Indicator
Part No. Description
CS-8000 Circuit SeekerTM
406 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ELECTRICAL TEST INSTRUMENTS
Pulser Fault Locator
• High voltage signal pulses radiate into the earth
at the location of the faults.
• With an A-frame mounted receiver, an analog
meter indicates the source of the voltage.
• Multiple faults on a single wire can be identified indi-
cating the need to replace instead of repairing.
• Extra long test leads feature heavy-duty alligator
clips for use on multiple cable types.
• Includes a rechargeable transmitter, receiver,
A-frame, ground stake,
• 120V AC charger, 12 volt DC (cigarette lighter)
adapter, complete operating instructions and
molded carrying case included. 1-year warranty.
• Battery-operated; (1) 12V & (1) 9V included.
Specifications
Transmitter Frequency: 447.5kHz
Transmitter Power: 2400VDC Peak
Voltage Protection: 240VAC/400VDC
Part No. Description
PE2003 Pulser Fault Locator
Buried Line Locator
• LED and LCD signal strength indicators make it quick and easy
to find exact line location.
• Lightweight and ergonomically balanced.
• Automatic signal boost makes it easy to trace lines, even those
with very weak signals.
• Receiver may be used in active or passive mode.
• Receiver locates multiple passive frequencies with a single setting.
• Receiver automatically locks out passive range when it detects
a transmitter signal, reducing the chance of tracing other lines
carrying weaker signals.
• Microprocessor based circuitry delivers increased accuracy and
features auto-gain control in all environments.
• Traces 20' underground and provides depth readings up to 15'.
• Transmitter can be connected to live lines up to 600V.
• Lifetime Limited Warranty. Molded carrying case included.
Specifications
Transmitter
Operating Voltage: 0-600 VAC; 0-300 VDC
Current: 13mA (Open Line); 150mA (live/shorted line)
Frequency: 33.3 kHz
Receiver
Depth Range: Measures: 0 - 15 ft. Traces: 0 - 20 ft.
±(10% reading + 0.2 ft)
Depth Resolution: 0.1 ft increments
Passive Trace Freq.: 12Hz - 24kHz
Part No. Description
BLL-200 Buried Line Locator
Tracker II
• High frequency transmitter ranges up to 4000 ft & depths to 7 ft.
• The transmitter offers three methods of connection: direct,
inductive coupler, or inductive antenna.
• Inductive antenna is built into the case housing and allows the
transmitter to be placed on the ground over the wire path to
radiate a signal down onto the conductor.
• Inductive coupler clamps around the wire or pipe for use on ac-
tive lines or where isolating the line is not an option.
• 32' lightweight receiver provides both audible & visual indications
of signal strength for accurate identification.
• Transmitter output and receiver sensitivity are both fully adjust-
able for maximum accuracy.
• Includes transmitter assembly, receiver assembly, inductive
coupler (clamp), inductive antenna (built-in), two 8 ft. test leads
with heavy-duty alligator clips and a durable polyethylene case.
Optional headset is available for use in high traffic areas or
other noisy environments.
• 1 year Warranty.
Specifications
Transmitter Frequency: 447.5kHz
Transmitter Power: 40Vp-p (140mW) maximum
Voltage Protection: 240VAC/500VDC
Automatic Shut-Off: 90 minutes - Transmitter & Receiver
Part No. Description
501 Tracker II Line Tracer
See Pages 436-437 for
Ridgid Utility and Line
Locators
407
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUTTING OIL / THREAD SEALANT
Thread Cutting Oil
• Cools threads and pipe during operation.
• Speeds metal removal.
• Improves thread quality
RIDGID thread cutting oils are free of chlorine and other halogens, PCBs and
heavy metals.Complete material safety data sheet available.
Dark Oil – Traditional mineral oil with low odor and anti-mist formulation.
Nu-Clear® Oil – Clear mineral oil with low odor and anti-mist formulation.
Special low temperature properties maintain workable viscosity to -20°F.
Extreme Peformance Oil – High performance mineral oil formulated to
produce superior quality threads on stainless steel and black pipe.
Catalog No. Case
Size Nu-Clear Dark Extreme Performance Pkg
1 Qt.* 41565 41590 74007 12
1 Gal. 70835 70830 74012 6
5 Gals 41575 41600 74047 1
55-Gal Drum 41585 41610 76767 1
16 oz** — — 22088 12
* Flip-top included with every quart bottle.
** Aerosol can.
Thread Sealant
RIDGID Gray and White proprietary formulas are NFS and UPC listed and ap-
proved for potable water use. The non-toxic, lead-free formulas won’t harden
or freeze, allowing easy disassembly of joints without compromising thread
integrity.
The Gray Sealant is a smooth extra-tacky paste that clings to the threads
and provides a leak-proof seal. RIDGID Gray Sealant prevents thread corro-
sion and is approved for use in water, steam, air and natural gas, as well as
in diluted acids, caustics, LPG and oil lines. RIDGID Gray should be used on
metal pipes only.
RIDGID White Sealant with ultra-fine Teflon particles allows for tighter seal
with less effort. The formula is not affected by oils, dilute acids or common
solvents and can be used on PVC, CPVC, ABS, nylon, polypropylene, polybu-
tylene, delrin, cycolac, as well as on metal pipes. RIDGID White Sealant should
not be used on lines carrying oxygen, halogens or liquid sodium.
Don't stand for anything less than the best.
Part No. Description
84282 1/2 pint can (brush-in-can)
84287 1 pint can (brush-in-can)
84292 1 quart can (brush-in-can)
84332 1/2 pint can (brush-in-can)
84337 1 pint can (brush-in-can)
408 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
THREADING MACHINES
FEATURES:
• RIDGID speed chuck.
• Reversible 1/2 HP universal motor.
• Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and
4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod
• Recessed On/Off/Reverse switch.
• CSA approved.
• Approved to UL standards (NRTLC).
Consists of:
• #300 Power Drive only with foot switch.
• #1206 Stand
• #311 Carriage with lever
• #341 Reamer
• #360 Cutter
• #811A Universal die head
• Set 1/2" - 3/4" Universal alloy dies
• Set 1" - 2" Universal alloy dies
• #32 Transporter
• #418 Oiler
• 1 gallon Nu-Clear thread cutting oil
Specifications
Motor: 1/2 HP, universal, reversible motor, single-
phase, 25-60 Hz, 115V (230V available).
Switch: Heavy-duty FOR/OFF/REV and Integral
Foot Switch.
Chuck: RIDGID speed chuck with replaceable
rocker-action jaws.
Spindle Speed: 38 RPM (57 RPM available).
Rear Centering Device: Cam-action turns with chuck.
Support Bar: Heavy-duty (2).
ACCESORIES
Part No. Model Description
42360 1206 Stand for 300 Power Drive
42575 32 Transporter (for Power Drives & Tristand Vises)
68815 311 Carriage with No. 312 Lever
42385 312 Carriage Feed Lever
10883 418 Oiler w/ 1 gal. of Nu-Clear Thread Cutting Oil
42365 341 Reamer for No. 311 Carriage with Lever
42370 360 Cutter for No. 311 Carriage
97065 811A Universal Q.O. Die Head Only, RH Only
97075 815A Self-Opening Die Head Only, RH Only
51005 819 Nipple Chuck Complete, 1/2"-2"
42380 1452 Clip-On Tool Tray
97345 304* Retrofit Kit (38 rpm)
97350 304* Retrofit Kit (57 rpm)
97365 — Jaw Inserts for Coated Pipe
46660 E-863 LH/RH Reamer Cone
41620 — Gearhead Motor Grease
Model 300 Complete
Spindle Pipe Rod Max. Geared
Speed Threading Threading Threader
Part No. Model Description RPM Capacity Capacity Capacity Weight
15682 300 Complete 115V, 25-60 Hz (NPT) 38 1/8-2 1/4-2 6" 212 lbs
15722 300 Complete 115V, 25-60 Hz (NPT) 57 1/8-2 1/4-1 1/2 6" 212 lbs
41855 300 Only 115V, 25-60 Hz 38 1/8-2 1/4-2 6" 94 lbs
75075 300 Only 115V, 25-60 Hz 57 1/8-2 1/4-1 1/2 6" 94 lbs
41860 300 Only 230V, 25-60 Hz 38 1/8-2 1/4-1 1/2 6" 94 lbs
Other voltages available upon request.
300A Complete consists of 300PD, 1206 Stand, 311A Carriage, 341 Reamer, 360 Cutter, 330 Oil Pan, 811A Die Head with 1/2"-3/4"
and 1"-2" Universal Dies.
Ordering Information
42575
Model 32
Transporter
42380
Model 1452
Tray
409
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADING MACHINES
Model 535 Threading Machine
FEATURES:
• Large 1.75 gallon oil tray.
• 100% larger chip tray.
• Generous top cover for keeping tools and fi ttings handy.
• High clearance carriage.
• Speed chuck with rocker-action jaws centers and grips work
piece instantly.
• Can be used with geared threaders Models 141 and 161.
• Uses Model 816/817 semiautomatic, Model 815A self-opening
or Model 811A quick-opening die heads.
• Length gauge for quick, accurate cut-off.
• CSA approved.
• Approved to UL standards (NRTLC).
Consists of:
• One (1) No. 811A universal, quick-opening die head.
• One (1) No. 341 reamer.
• One (1) No. 820 cutter.
• One (1) set 1/2"-3/4" universal alloy dies.
• One (1) set 1" - 2" universal alloy dies.
• One (1) gallon stainless steel premium oil.
• Four (4) hex wrenches.
• One (1) spare E-1032 cutter wheel
Description Cutter
Part No. Model 115V 25-60Hz Model RPM Volts Weight
93287 535 1/2"-2" NPT 820 36 115V 260 lbs
96497 535 Machine Only 820 36 115V 245 lbs
96502 535 1/2"-2" NPT 820 54 115V 260 lbs
Machines listed as 1/2"-2" include standard equipment. Machine only includes standard equipment less all die heads and dies. Please
use catalog item numbers. when ordering.
Pipe Capacity: 1/8"-2", 2 1/2"-4", 4"-6" with 141 and 161
geared threaders.
Bolt Capacity: 1/4"-2”
Motor: 1/2 HP, single-phase, 115V, 25-60 Hz,
15 Amp reversible universal motor.
Switches FOR/OFF/REV & Integral safety foot switch.
Chuck: Speed Chuck™ with replaceable rocker-
action jaws.
Rear Centering Device: Cam-action, turns with chuck.
Spindle Speed: 36 RPM standard. 54 RPM model available.
Reamer: 5-flute cone, RH, 1/8"-2".
Cutters: Self-centering, full-floating.
Two models available:
– (1) Standard. #820 Wheel-Type Cutter,
pipe capacity 1/8"-2", bolt capacity 1/4"-1".
– (2) Optional. #821 Blade-Type cutter,
pipe capacity 1/2"-2". See ordering chart.
Oil Pump: Self-priming gerotor oil pump.
RH/LH combination reamer available.
Specifications
Model 300 Compact Threading Machine
FEATURES:
• Heavy-duty proven performance.
• Lightweight, portable design.
• Fast transport and set-up.
• Self-Contained Oil System with adjust-
able flow control.
• Versatility for threading and grooving.
• Quiet operation.
• CSA approved.
• Approved to UL standards (NRTLC).
Consists of:
• #811A Quick-opening die head.
• #344 Reamer.
• #360 Cutter with E-1032 Cutter Wheel.
• 1 Set 1/2" - 3/4" Alloy Universal Dies.
• 1 Set 1"- 2" Alloy Universal Dies
• 1 gallon Nu-Clear thread cutting oil
Part No. Model Description
67182 300 Compact Kit includes Model 250 Folding Wheel Stand
Specifications
Pipe Capacity: 1/8"-2"
Bolt Capacity: 1/4"-2”
Motor: 1/2 HP, 115V
universal 25-60 Hz
Switches FOR/OFF/REV w/
Integral foot switch.
Chuck: Hammer-type with
replaceable rocker
action jaw inserts.
Oiling System: Through-the-head with
integral oil reservoir.
Self-priming, constant-
flow, gerotor pump.
Cutter: Model 360, roll-type
cutoff, self-centering,
full-floating.
Reamer: Model 344, 1/8"-2", five
flute cone, RH only.
410 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
THREADING MACHINES
FEATURES:
• Threads 1/4"-2" pipe at 36 RPM and 2 1/2"-4" at 12 RPM.
• The 1224 threads a wide range of pipe including black, galvanized and plastic-
coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as
rod up to 30 Rockwell C.
• An induction motor insures sound levels well within the limits set by the regulat-
ing authorities.
• A special capacitor-start / capacitor-run motor allows the 1224 to thread a full
range of material where voltage drop is experienced.
• 1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered
or straight NPT/NPSM or BSPT/BSPP threads.
• Constant and proper lubrication of dies and workpiece with through-head oiling.
• CSA approved.
• Approved to UL standards (NRTLC).
Specifications
Pipe Capacity: 1/4"-4", 4"-6" with 161 Geared Threader.
Bolt Capacity: 1/4"-2”
Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction type.
Switches FOR/OFF/REV & Integral foot switch.
Chuck: Hammer-type with replaceable rocker-action jaw inserts.
Rear Centering Device: Cam action
Spindle Speed: 36/12 RPM.
Reamer: Model 744, 1/4"-4" blade-type".
Cutters: Model 764 full-floating, self-centering 1/4"-4" with F-229
cutter wheel.
Oil Pump: self-priming gerotor oil pump. Automatic-reversing,
constant-flow
Part No. Model Description Weight
26092 1224 1/2-4 NPT 120V 60 Hz 509 lbs
26097 1224 1/2-4 NPT 240V 60 Hz 509 lbs
26127 1224 1/2-4 BSPT 120V 60 Hz 509 lbs
26112 1224 1/2-4 BSPT 115V 50 Hz 509 lbs
26122 1224 1/2-4 BSPT 240V 60 Hz 509 lbs
26107 1224 1/2-4 BSPT 220V 50 Hz 509 lbs
26102 1224 1/2-4 BSPT GS 220V 50 Hz 526 lbs
31442 1224 1/2-4 NPT 220V 50 Hz 509 lbs
Consists of:
• No. 714 (914) 2 1/2"- 4" receding
self-opening die head.
• No. 711 (911) 1/4"- 2" universal self-
opening die head.
• 1 set 1/2"- 3/4" universal alloy dies.
• 1 set 1" - 2" universal alloy dies.
• 1 set 2 1/2"- 4" 1224 high-speed dies.
• 3 hex keys.
• Spare F-229 cutter wheel.
• 3/4" combination wrench.
• Tool box.
• No. 744 reamer.
• No. 764 cutter
• 1 gallon Nu-Clear thread cutting oil
Model 1224 Threading Machine
Model 100A Universal
Leg & Tray Stand
• Adjustable to fit 1822, 535, and 1224
Threading Machines.
• Heavy duty steel frame for maximum
stability and rigidity.
• Large dent and corrosion resistant tool
tray for added convenience.
Part No. Description
92457 Model 100A Stand
22563 Optional Steel Cabinet
Model 150A Universal
Wheel & Tray Stand
• Adjustable to fit 1822, 535, and 1224
Threading Machines
• Heavy duty steel frame for maximum
stability and rigidity
• Large dent and corrosion resistant tool
tray for added convenience
• Large diameter wheels for easy job-site
transport.
Part No. Description
92462 Model 150A Stand
22563 Optional Steel Cabinet
Model 200A Universal
Wheel & Cabinet Stand
• Adjustable to fit 1822, 535, and 1224
Threading Machines.
• 7 ga. steel walls and welded construction.
• 2 internal & 1 external storage shelves.
• Oversized bi-fold door with steel clasp
• Cut-outs for power cord & foot switch storage.
• 2 drain plugs for easy cleaning
• Large diameter wheels for easy job-site
transport.
Part No. Description
92467 Model 200A Stand
411
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
THREADING MACHINES
Model 690 Power Drive
FEATURES:
The 690 Power Drive is a new lightweight
and powerful hand-held power drive. Designed for
threading 1/8" - 2" pipe with the use of 11-R Die Heads.
It comes equipped with a full set of 11-R Die Heads, 1/2"
- 2", the 691 Support Arm and a durable Carrying Case. The 690
Power Drive is the perfect lightweight and portable power drive for
maintenance and repair workers, as well as service plumbers requiring
2" pipe capacity. Includes case and support arm.
Specifications
Pipe Capacity: 1/8"-2" pipe.
Bolt Capacity: 1/4"-2”
Motor: Universal 1020 W, 230 or 115V, 50-60 Hz.
Switches Heavy-duty paddle switch with safety lock-
off device (automatically locks off when
released).Seperate FORWARD/RELEASE
switch.
Gear Head: Spur gear reduction/face gear drive. All
shafts, ball and needle bearing mounted.
Permanently lubricated gear housing.
Rear Centering Device: Cam action
Spindle Speed: 32 RPM.
Die Heads: 1/2", 3/4", 1”, 1 1/2", 2" (type 11-R).
Support Arm: No. 691
Die Head Adapter Used with 1/8” through 1 1/4" die heads.
Carrying Case
Part No. Model Description
16013 690 115V 1/2"-2" 25-60 NPT
16708 690 115V Kit Less Die Heads
Model 700 "PONY" Power Drive
FEATURES:
• Heavy-duty hand-held power drive.
• Features reversible 115V or 230V universal motor.
• Capacity 1/8"-2" pipe. Designed for RIDGID No. 12R die heads. Other RIDGID die heads (00R, 00RB, 11R) using
adapters, threading 2-1/2" through 6" with 141/161 geared threaders.
• Approved to UL standards (NRTLC). CSA approved.
Manual Pipe Threaders
Exposed Ratchet Threaders:
• Die heads lock into ratchet assembly and are
removed by pulling out ratcheted knob. Includes
ratchet handle.
Enclosed Ratchet Threaders:
• Die heads snap into from either side. Ratchet
knob indicates forward/reverse. Includes ratchet
handle.
Model Part No.'s
No. Capacity NPT BSPT NPSM Weight
Exposed Ratchet Threader Sets
12-R 1/2" - 1-1/4" 36480 — — 23-3/4 lbs.
12-R 1" - 2" 36490 — — 27 lbs.
12-R 1/2" - 2" 36475 65255 36510 34-3/4 lbs
12-R 1/4" - 2" 36495 — — 42-1/4 lbs
12-R 1/8" - 2" 36505 65285 — 45-1/2 lbs.
Enclosed Ratchet Threader Sets
11-R 1/2" - 1-1/4" 36390 65135 36425 16 lbs.
11-R 1/2" - 1-1/4" 36420 65165 — 20 lbs.
Specifications
Pipe Capacity: 1/8"-2" Pipe
Bolt Capacity: 1/4"-1" Bolt (using 00-RB)
Motor: Universal, 1/2 HP, 115V or 230V 25-60 Hz.
Switches Double throw, reversible.
Gear Head: All-spur gear reduction. Spring-loaded adapter pawl. Hardened
steel spindle gear.
Spindle Speed: 32 RPM.
Part No. Model Description Weight
41935 700 115V 25-60 Hz 31 lbs
41940 700 230V 25-60 Hz 31 lbs
412 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DIE HEADS
Part Model Die Head How Thread Oil Thru Dies Pipe Bolt Weight
No. No. Description Opened Direction Head Used Cap. Cap. lb
97065 811A Universal Q.O. RH Yes Universal 1/8 -2 1/4 -2 12.5
97075 815A Universal S.O. RH Yes Universal 1/8 -2 1/4 -2 13
84537 816 Universal S.A. RH Yes Universal 1/8 -3/4 - 13
84532 817 Universal S.A. RH Yes Universal 1 -2 - 13
23282 842 Universal Q.O. LH Yes Universal 1/8 -2 - 12-1/2
10491 555 555 Q.O. RH Yes Dual/Bolt 1/8 -3/4 - 8
97070 811A British Universal Q.O. RH Yes Universal 1/8 -2 1/4 -2 12-1/2
97080 815A British Universal S.O. RH Yes Universal 1/8 -2 1/4 -2 13
23297 856 British Universal S.O. LH Yes Universal 1/8 -2 1/4 -2 12-1/2
97045 531 Bolt Q.O. RH/LH Yes 500B - 1/4 -1 7-1/2
97050 532 Bolt Q.O. RH/LH Yes 500B - 1-1/8 -2 9
42047 500A Mono Q.O. RH Yes Mono 1/8 - 6-3/4
42052 500A Mono Q.O. RH Yes Mono 1/4 - 7
42057 500A Mono Q.O. RH Yes Mono 3/8 - 7
42062 500A Mono Q.O. RH Yes Mono 1/2 - 7-1/4
42067 500A Mono Q.O. RH Yes Mono 3/4 - 7-1/4
42072 500A Mono Q.O. RH Yes Mono 1 - 8
42077 500A Mono Q.O. RH Yes Mono 1-1/4 - 8
42082 500A Mono Q.O. RH Yes Mono 1-1/2 - 8-1/2
42087 500A Mono Q.O. RH Yes Mono 2 - 8-1/2
Die Heads for 2" Threading Machines / Die Head Racks
No. 816/817MONO DIE HEADNo. 532No. 811ANo. 815A
FEATURES
• 141 threads 2½", 3", 3½", 4" pipe with one set of dies.
• 161 threads 4", 4½", 5", 6" pipe with one set of dies.
• Jaw clutch prevents jamming.
• Simple adjustment for tapered or straight threads.
• Cam-type workholder sets instantly.
• Fully enclosed gearing.
• Right-hand only.
• Ratchet and handle assemblies sold separately.
Part Nominal Pipe Size Weight
No. Model Description Capacity Lbs.
36620 141 NPT with 1 Set High-Speed Dies 2-1/2" - 4" 93
65380 141 BSPT with 1 Set High-Speed Dies) 2-1/2" - 4" 93
36630 161 NPT with 1 Set High-Speed Dies 4" - 6" 158
39380 D-1440 Carriage Feed Lever — 4.3
96725 — Metal Carrying Case for 141 17
No. 141 / 161 Geared Threaders
413
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DIE HEADS / DIES
No. 811
Universal Die Head
No. 714
No. 914
No. 711
No. 911 No. 816 / 817
Universal Die Head
Pipe Dies for Use in Universal Die Heads
(No. 504A, 711, 713, 811A, 815A, 816, 817 and 842
(NPT) Nominal Pipe Size - Threads per Inch. (NPSM) Nominal Pipe Size - Threads per Inch.
Die Material or Type 1/8-27 1/4–3/8-18 1/2–3/4-14 1–2-11/12 1/8–27 1/4–3/8-18 1/2–3/4-14 1–2–11-1/2
Alloy RH 47735 47740 47745 47750 47825 47830 47835 47840
Alloy LH* — 47795 47800 47805 - - - -
High-Speed RH 47755 47760 47765 47770 47845 47850 47855 47860
High-Speed LH* 39587 47810 47815 47820 — — — 70775
H.S. For Stainless RH 47775 47780 47785 47790 — — — —
H.S. For Cast Iron RH — — — 70740 — — — —
H.S. For PVC RH — — 70745 70750 — — — —
H.S. For Plastic
Coated Pipe RH — — 50012 31822 — — — —
* Requires left hand model die head
Part Model Capacity Weight
No. No. Description in. lb.
26192 1224 H.S. Dies NPT 2 1/2-4 2-1/4
33642 1224 H.S. Dies BSPT 2 1/2-4 2-1/4
31827 1224 H.S. NPT Dies for Plastic-Coated Pipe 2 1/2-4 2-1/4
31832 1224 H.S. BSPT Dies for Plastic-Coated Pipe 2 1/2-4 2-1/4
32237 1224 H.S. Dies NPT for PVC 2 1/2-4 2
32242 1224 H.S. Dies BSPT for PVC 2 1/2-4 2
33057 1224 H.S. Dies NPT for Stainless Steel 2 1/2-4 2
33072 1224 45° Beveling Dies 2 1/2-4 2
33077 1224 37 1/2° Beveling Dies 2 1/2-4 2
44992 1224 Bevel Guide Set 2 1/2-4 2
44997 1224 37 1/2° Bevel Bit Only — —
45002 1224 45° Bevel Bit Only — —
1224 Pipe Dies 2 1/2" - 4"
No. 418 Oiler
Pump Assembly:
• 50% more oil per stroke than other hand-held oilers for longer die life.
• An ergonomic 2-finger trigger design that reduces user fatigue.
• Die cast, heavy-duty body with swivel nozzle with no exposed parts for longer life.
Heavy Duty Reservoir:
• The new 418 oiler features a fastenerless twist and lock drip pan that easily locks in place.
• The new material withstands abrasion, is lighter than metal and does not rust.
• `The new reservoir will not crack, leak or deform over time.
• Integral molded body eliminates leaks at the hose-reservoir connection.
• 50% more oil per stroke than other hand-held oilers for longer die life.
Part No. Model Description Wt. Lbs.
10883 418 Hand operated oiler complete. Includes 1 gal. thread
cutting oil, reservoir w/removeable chip tray, & 54" hose 20-1/2
72342 402 Hand operated oiler with attachment for 1 gal. & 5 gal.
containers & 54" hose. 2-1/2
72332 #4 Hand-operated oiler only 1-1/4
72327 #4 Hand-operated oiler with 54" hose & hose fittings 1-1/4
414 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GROOVERS & CUTTERS
FEATURES:
• Easy roll set change out – up to 12" wide capacity range in one unit.
• Cast-in carrying handle – easy to transport or lock up to prevent theft.
• Included ratchet – 90 degree bend-in handle makes grooving easier.
• Available customized tool box – holds 915 groover & all available roll sets.
• Easy to use depth setting gauge – helps make accurate grooves.
Consists of:
• 915 Roll Groover with 2"-6" Sch. 10 (2"-3 1/2" Sch. 40).
• Roll Set Ratchet Wrench
Specifications
Capacity: 1 1/4" - 12" Sch. 10 Steel & Stainless Steel Pipe.
1 1/4" - 6" Sch. 40 Steel & Stainless Steel Pipe.
2"-8" K, L, M, DWV Copper.
1 1/4" - 6" Sch. 40 PVC.
1 1/2", 2 1/2" - 3" Sch. 80 PVC.
Operation: Feed screw w/ 1/2" ratchet wrench (included)
Weight: 23 lbs.
Model 915 Portable Roll Groover
Part No. Model No. Description Wt. Lb.
88232 915 915 Roll Groover with 2" - 6" Sch. 10 (2" - 3 1/2" Sch. 40) Roll Set 23
92437 — Drive & Groove Roll Set for 11/4" - 11/2" Sch. 10 or 40 Steel, Stainless Steel, PVC 2
92447 — Drive & Groove Roll Set for 4" - 6" Sch. 40 Steel, Stainless Steel, PVC 4-1/2
92442 — Drive & Groove Roll Set for 8" - 12" Sch. 10 Steel, Stainless Steel, PVC 4-1/2
92452 — Drive & Groove Roll Set for 2" - 8" Copper Tube Type K, L, M, and DWV 2
93497 — 915 Tool Box 21-1/2
76827 — Metric Diameter Tape 1/2
76822 — English Diameter Tape 1/2
93642 — Drive & Groove Roll Set 2"-6" Sch. 10 Steel, Stainless Steel, PVC, 2"-3 1/4" Sch. 40 Steel
Note: A Roll Groove Set consists of a Groove Roll and a Drive Roll.
Copper Roll Groove Set includes Black Reaction Arm and one Copper Stabilizer Pad.
FEATURES:
• Specifically designed for field service roll grooving applications.
• Quick and easy mount to RIDGID Nos. 300 Power Drive, 535 or 1822
Threading Machines.
• Cam-type feed actuation – translates into minimum operator effort to
form roll grooves.
• Durable cast-iron housing withstands extensive field use.
• Depth adjustment screw separate from feed mechanism allows for
consistent groove depth.
• Lightweight, only 33 lbs., allows for easy transport and storage.
• Integral feed handle is part of overall unit. No extra tools required.
• Optional Roll Sets for: Copper 2"- 6" (Types K, L, M, DWV), 1" Sch. 10,
40 steel pipe.
• Optional 1¼"-1½" and 2"- 6" AWWA Roll Sets.
• Easy serviceability – drive and groove rolls are easy to change.
Specifications
Capacity: 1 1/4"-6" Sch. 10 steel, stainless steel, PVC.
1 1/4"-3" Sch. 40 steel, stainless steel, PVC
2"-6" Copper (type K, L, M, DWV) optional.
Weight: 33 lbs.
Model 916 Portable Roll Groover
Part No. Model No. Description Wt. Lb.
45007 916 Roll Groover for 300 Power Drive 33
46852 916 Roll Groover for Copper Tubing for 300 Power Drive 34
60382 916 Roll Groover for 535 33
48307 916 Roll Groover for 1822 33
415
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
GROOVERS & CUTTERS
Model 918I Roll Groover
Model 975 Portable Roll Groover
FEATURES:
• Capable of grooving 1" to 8" schedule 40 and 1" to 12" schedule 10 pipe faster than any
roll grooving machine in its class.
• Comes standard with a rugged wheel stand, tray is capable of supporting 200 lbs.
• Offers maximum versatility in roll grooving capacities (see specifications below).
• Custom engineered 2-stage, 15-ton hydraulic pump and ram eases grooving and reduces
flare and operator’s fatigue.
• Produces consistent, high quality roll grooves.
• 115V approved by CSA to CSA and UL standards.
Consists of:
• (1) 2"-6" Schedule 10/40 Roll Set.
• (1) 8"-12" Schedule 10 (8" Schedule 40) Roll Set.
• (1) Tools for Roll Set Changeout.
• (1) Carry Case for Roll Sets.
• (1) Heavy-Duty Wheel Stand with Tray.
• (1) Foot Switch.
• (1) 1"–12" Stabilizer for Grooving Nipples.
FEATURES:
• Two Groovers in one - Performs both machine and manual in-
place grooving of 1 ¼” to 6” pipe.
• Auto-tracking feature means pipe will not “walk-off” the groover
• Integral, index depth setting gauge allows fast, reliable set-up.
• 55% higher gear reduction for easier overhead grooving vs.
competition.
• Same rugged durability and groove accuracy as with all RIDGID
groovers
• Integrated, cast-in handle for easy transport.
Specifications
Pipe Capacity: 1-1/4” – 6” Sched. 10 & Sched. 40 Steel,
Aluminum, & PVC Pipe; 1-¼” – 6” Sched.
10 & 1-¼” – 2” Sched. 40 Stainless Steel Pipe .
Depth Adjustment: Adjusting screw and integral, index depth
gauge.
Actuation: Feed screw with 1/2" ratchet wrench or
15/16" (Included) hex wrench.
Power Drive: 300 Power Drive 38/57 RPM.
Weight: 26 lbs.
Part No. Model No. Description
25638 975 Combo Roll Groover
Specifications
Pipe Capacity: 1"-6" Sched. 10 & Sched. 40 Steel Pipe
2"-6" O.D., Copper Tube (Type K, L, M, &
DWV), 1" Sched. 10 & 40.
Motor: Universal 1/2 HP, 115v, 60 Hz.
Motor Control: On/Off Heavy-Duty with Foot Switch.
RPM: 45 RPM. (No Load)
Weight: 185 lbs.
Part No. Model No. Description
64977 918I Roll Grooving Machine, complete, 115V
48405 — Roll Set for 8" - 12" Sch. 10 & 40 steel
pipe, with carrying case
48407 — Roll Set for 1-1/4" - 1-1/2" Sch. 10 & 40
steel pipe, with carrying case
48417 — Roll Set for 2" – 6" Copper Tube
59992 — 1" - 12" Stabilizer for grooving nipples
76827 — Metric Diameter Tape
76822 — English Diameter Tape
Note: A Roll Set consists of a Groove Roll and a Drive Roll.
416 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GROOVERS & CUTTERS
Model 918 Hydraulic Roll Groover
Part No. Model No. Description Wt. Lb.
95782 920 920 Roll Groover with 2"- 6" Sch. 40, 8"-12" Sch. 40 and 14"-16" Std. Wall Roll Sets 33
96987 — Drive and Groove Roll Set for 18" - 20" Sch. 10 Steel or Stainless Steel 34
96992 — Drive and Groove Roll Set for 22" - 24" Sch. 10 Steel or Stainless Steel 33
96997 — Drive and Groove Roll Set for 4" - 6" Sch. 40 Steel or Stainless Steel 33
96982 — Drive and Groove Roll Set for 2" - 8" Copper Tube Type K, L, M, and DMV 33
96372 RJ6264 RJ624 Large Diameter Pipe Stand 34
76827 — Metric Diameter Tape 33
76822 — English Diameter Tape 33
42575 32 Transporter for Power Drives and Tristand Vises 33
FEATURES:
• Largest grooving capacity in its class.
• Transportation Mode – Detachable Wheels enable one man to eas-
ily move the 920 around a jobsite. Also available is a Model No. 32
Transporter.
• Patented Depth Setting Gauge – Easy and accurate groove depth set-
ting does not require adjusting the protective guarding.
• Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to
control flare and optimize groove time.
• Front Roll Set Change-Out – User can switch groove roll sets quickly
and easily.
• Easy Adjust Support Legs – Helpful when leveling the groover on un-
even ground.
Consists of:
• 920 Roll Groover with support legs.
• 2"- 6" Sch. 10/40 Groove Roll Set with box.
• 8"-12" Sch. 10/40 Groove Roll Set.
• 14"-16" Standard Wall (0.375) Groove Roll Set with box.
• 920 Training Video and User Manual.
• Transport wheels
Model 920 Portable Roll Groover
FEATURES:
The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic
ram in a compact, easy to transport unit. With one man set-up and operation, the
918 is the ideal groover for job site requirements. The 918 mounts quickly to RIDGID
300 power drive, 535, 1822, or 1224 Threading Machines. Designed to provide
maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8"
Schedule 40 standard wall pipes. Roll Set changeout is accomplished in seconds.
Specifications
Capacity: 1"-12" Schedule 10 steel, stainless steel, PVC.
1"-8" Schedule 40 steel, PVC.
1"-2" Schedule 40 stainless steel.
2"-6" Copper (Types K, L, M, DWV).
2 1/2"-6" Schedule 80 PVC.
Weight: 81 lbs.
Part No. Model No. Description Wt. Lb.
48297 918-1 918 Roll Groover w/300 Power Drive Mount Kit 104
48377 918-2 918 Roll Groover w/1822 Power Drive Mount Kit 134
48382 918-4 918 Roll Groover w/1224 Carriage Mount Kit 131
48387 918-5 918 Roll Groover w/535 Carriage Mount Kit 117
47222 918 Only 918 Roll Groover Only 95
417
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HINGED PIPE CUTTERS / ROLL GROOVER
RGCOMBO2 Portable Roll Groover
RGCOMBO2 roll groover forms standard rolled grooves in steel,
stainless steel, and aluminum pipe from 1 1/4” to 6”. The formed
grooves comply with the specifications required for mechanical
coupling systems. The only adjustment required is for the depth
of the groove.
RGCOMBO812 roll groover forms standard rolled grooves in 8”
- 12” steel, stainless steel, and aluminum pipe up to 0.188” wall
thickness. The formed grooves comply with the specifications
required for mechanical coupling systems. The only adjustment
required is for the depth of the groove. The RGCOMBO812
is the only combo roll groover that will groove 8” - 12” pipe.
Competitive tools in this size range are either hydraulic or
manual power, not 2-in-1.
Pipe Capacities
RGCOMBO2: 1-1/4” - 6” Sch. 40 for steel, stainless steel
and aluminum pipe.
RGCOMBO812: 8” - 12” Steel, Stainless Steel and
aluminum pipe up to 0.188" wall
Part Item
No. Code Material
RGCOMBO2 09200 1-1/4" - 6" Steel, Stainless Steel,
Aluminum
RGCOMBO812 09210 8" - 12" Steel, Stainless Steel,
Aluminum up to 0.188" wall
Steel Pipe Cutter (4-Wheel With Guides)
Hinged Cutters
(1” – 12”)
Four wheels cut steel, stainless steel, cast and ductile iron
with only 90° to 110° handle swing. Only 4” clearance
required around pipe. Strong guide fingers ensure perfect
alignment for square cuts. A closed 360° frame forces all
energy into cutting the pipe for maximum efficiency.
There is no shower of sparks in this cold cut. This is the
only hinged cutter that tracks every time and the only one
recommend for ductile iron, steel, and stainless steel to
Schedule 100.
Part Model Pipe Capacity Length Wt.
No. No. Nominal Size inches lbs.
H2-1/2S* 03110 1" – 2-1/2" 17 8
H2-1/2I* 03112 1" – 2-1/2" 17 8
H2-1/2X* 03114 1" – 2-1/2" 17 8
H4S** 03120 2" – 4" 22 14
H4I* 03122 2" – 4" 22 14
H4X* 03124 2" – 4" 22 14
H6S 03130 4" – 6" 28 22
H6I 03132 4" – 6" 28 22
H6X 03134 4" – 6" 28 22
H8S 03140 6" – 8" 32 28
H8I 03142 6" – 8" 32 28
H8X 03144 6" – 8" 32 28
H8XX 03146 6" – 8" 32 28
H12S 03150 8" – 12" 34 39
H12I 03152 8" – 12" 34 39
H12X 03154 8" – 12" 34 39
H12XX 03156 8" – 12" 34 39
* Exclusive
Note: S = comes with wheels for steel; I = for cast and ductile
iron; X = for schedule 80 steel; XX = for schedule 100 steel.
Wheels for same size cutters are interchangeable. Recommend
only Reed cutter wheels be used with these hinged cutters. Reed
wheels are made from high shock-resistant tool steel and then
precisely heat treated.
RGCOMBO2 Hydraulic Roll Groover
Spring tensioned guide bars
provide square alignment
for four wheel cutters. Short
handle for close quarter
work.
• 2RBS Wheel*
Part Model Pipe Capacity Wt.
No. No. Description Nominal Size lbs.
2-4WG 03338 Steel Pipe Cutter 1/2" –2" 7.3
418 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE CUTTERS / PIPEREAMERS
Model 258 & 258XL Power Pipe Cutter
FEATURES:
• Square cut 21' or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.
Consists of:
• (1) RIDGID 774 Square Drive Adapter.
• (1) 8 1/2" HD Cutter Wheel Assembly.
• (1) Hydraulic Ram and Foot Pump.
• (2) 2 1/2" to 12" Ball Transfer Pipe Support
Specifications
Cutting Capacity: Model 258: 2-1/2" to 8" schedule.
10*/40 steel pipe
Model 258XL: 8" to 12" schedule.
10*/40 steel pipe
Depth Adjustment: Adjusting screw w/integral depth
setting gauge.
Actuation: Feed screw with 1/2" ratchet
wrench or 15/16" (Included) hex
wrench.
Power Drive: 700 Power Drive 33 RPM. (no load)
Weight: Model 258: 105 lbs. Model 258XL: 140 lbs.
Part No. Model No. Description Wt. Lb.
50767 258 2 1/2"-8" Pipe Cutter 105
58227 258-XL 8"-12" Pipe Cutter 140
50812 — 8-1/2" HD Cutter Wheel Only 2
58222 — 8-1/2" Thin Wall Cutter Wheel Only 2
54397 — Transport Cart 24
60002 258PS Pipe Support 2 1/2"-12" 7
60007 — Replacement Ball Transfer Head set 5.5
61757 — Pipe Roller for Beveling (Model 258 only) 7
Model 258
Model 258 XL
Pipe Reamers
• No. 2-S Spiral Ratchet Reamer – Self-
feeding spiral design for extra-fast and
easy hand reaming. Model 2S Reamer
is not suitable for power drive reaming.
• Nos. 2 and 3 Ratchet Reamers – Long
taper design will not dig in. Suitable for
use with power drives.
• No. 254 Spiral Ratchet Reamer – Hollow
center reduces weight. Large pressure plate.
Hardened alloy steel cone removable for
sharpening.
Part Model Capacity Weight Replacement
No. No. Description in. lb. Cone
34955 2-S Spiral Reamer 1/4 – 2 7-1/4 35020
34945 2 Straight Reamer 1/8 – 2 7 34975
34950 3 Straight Reamer 3/8 – 3 11-1/2 35090
34960 254 Spiral Reamer 2-1/2 – 4 14 35135
Pipe Reamers
419
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE CUTTERS / BENDERS
Soil Pipe Cutters
• Cuts 1-1/2"– 6" No Hub® soil pipe.
• Lighter weight and closer spacing of cutter wheels, together with
simple ratcheting action, give smooth cut on lighter wall pipe.
• Ratchet-action handle parallel to pipe allows for application in
trenches of minimum width.
• Complete with hand guard to protect operator’s knuckles when cutting.
Part Model Pipe Capacity
No. No. Description Nominal Size
68650 206 Soil Pipe Cutter No Hub 1-1/2" – 6"
69982 226 In-Place Soil Pipe Cutter 1-1/2" – 6"
32900 246 Soil Pipe Cutter 1-1/2" – 6"
73847 276 Soil Pipe Cutter 1-1/2" – 6"
74207 228 Soil Pipe Assembly Tool 1-1/2" – 8"
PC-1375 Plastic Pipe & Tubing Cutter
• Patent pending, X-CEL blade for fast single stroke cutting.
• Durable aluminum construction for heavy duty use.
• Extra large 1.375" O.D. capacity.
• Easy turn-thumb latch for reliable storage.
• Replaceable, hardened steel cutting blade.
• Spring-loaded handles provide instant adjustment to any pipe size.
• Burrless cutting operation provides a square cut.
Part Model Pipe Capacity
No. No. Description Nominal Size
23493 PC-1375 Single Stroke Plastic Pipe 1/8" –1-3/8"
& Tubing Cutter
25588 PCB-1375 PC-1375 Replacement Blade
Heavy Duty Pipe Cutters
• Fast, clean pipe cutting by hand or power.
• Extra-long shank protects adjustment threads, while an extra-
large handle is provided for quick, easy adjustment.
• Can be converted to 3-wheel cutter by replacing rollers with
cutter wheel, or the 2A and 4S can be ordered as 3-wheel
model for use in areas where a complete turn is not possible.
Part Model Pipe Capacity Wt.
No. No. Description Nominal Size lbs.
32810 1-A Heavy-Duty 1/8" –1-1/4" 6.5
32920 2-A 3-Wheel Hvy Duty 1/8"–2" 7
32825 2-A Heavy-Duty 1/8"–2" 7
32830 3-S Heavy-Duty 1"–3" 15
32840 4-S Heavy-Duty 2"–4" 18
32845 4-S 3-Wheel Hvy Duty 2"–4" 18
32850 6-S Heavy-Duty 4"–6" 22
Nos. 1-A & 2-A
Nos. 3-SA & 4-S & 6-S
BK-100S & BK-125S Scissor Cutters
• Easy-to-use tools that can cut most grades of plastic and rubber
pipe and tubing, including Sch. 40 PVC.
• Spring loaded handles provide instant adjustment to proper pipe size.
• “Burr-less” cutting operation provides a square cut.
• Replaceable stainless steel cutting blade folds into handle for
safe handling and carrying.
• Do not use to cut plastic-coated metallic tubing or pipe.
Part Model Pipe Capacity
No. No. Description Nominal Size
91125 138 Plastic Pipe Cutter 1/8" –1-1/2"
12831 1493 Plastic Pipe Cutter 1/8"–2"
73842 BK-100S Plastic Pipe Scissors Cutter 1/8"–2"
73847 BK-125S 1-1/4" Plastic Pipe Scissors Cutter 1"–3"
No. 138
Nos. BK-100S & BK-125D No. 226
No. 206
No. 276
No. 246
300 Series Lever Benders
Designed to bend copper tubing to
a maximum of 180°. Offset cushion
grip handles and a 90° start angle,
together with a specially engineered
plastic shoe, combine to ease bend-
ing effort. 300 series lever benders
form smooth bends in types K & L
soft (annealed) copper tubing.
420 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TUBING CUTTERS
Quick Acting Tubing Cutters with NEW X-CEL Features
• Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces
and thrust bearing slide assemblies for smooth operation.
• All Models now include an X-CEL Knob and X-CEL Pin for quicker cutting and wheel replace-
ment.
• These cutters are available in models for plastic pipe or metallic tubing.
• Models 151 and 152 feature fold-away reamers.
Part No. Model No. Description Std. Wheel Capacity Wt. Lb.
31632 151 Quick-Acting Cutter E-3469 1/4" – 1 5/8" 7/8
31637 151-P Above w/Wheel For Plastic* E-2155 1/8" - 1"-1/4"** 7/8
31642 152 Quick-Acting Cutter E-3469 1/4" – 2-5/8" 1-7/8
31647 152-P Above w/Wheel For Plastic* E-2155 1/4" – 2"** 1-7/8
34572 153 Quick-Acting Cutter E-5272 1-1/4" – 3-1/2" 2
36597 153-P Above w/Wheel For Plastic* E-3469 1" – 3"** 2
36592 154 Quick-Acting Cutter E-2155 1-7/8" – 4-1/2" 3
31652 154-P Above w/Wheel For Plastic* E-2558 1-1/2 – 4"** 3
36562 156 Quick-Acting Cutter E-2558 4" – 6-5/8" 4
31667 156-P Above w/Wheel For Plastic* E-2157 4" – 6"** 4
* Plastic models include spare cutting wheels for cutting copper
**Nominal Plastic Pipe Size
Midget Close Quarters Tubing Cutters -
Nos. 101, 103, 104, 117 & 118
• Specifically designed for use in restricted spaces on small diameter, hard and soft copper,
aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts.
• Strong, lightweight slide & wheel housing, large knurled feed screw knob.
• The Model 117 & 118 include a self-feeding cutter wheel that automatically cuts after tight-
ening the knob only once.
• The Model 117 features a special knob for easier tightening of the feedscrew.
Part No. Model No. Description Std. Wheel Capacity Wt. Lb.
40617 101 Close Quarters Cutter* E-3469 1/4" – 1-1/8" 1/4
32975 103 Close Quarters Cutter E-3469 1/8" – 5/8" 1/6
32985 104 Close Quarters Cutter E-3469 3/16" – 5/16" 1/4
97787 117 Close Quarters Quick-Feed Cutter E-3469 3/16" – 5/16" 1/4
86127 118 Close Quarters Quick-Feed Cutter* E-3469 1/4" – 1-1/8" 1/4
* Models 101 and 118 include spare cutter wheel in knob
Midget Tubing & Conduit Cutters -
Nos. 10, 15, 20 & 30 with NEW X-CEL Features
• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall conduit.
• Now includes X-CEL Knob for quicker cutting.
• Nos. 10, 15 and 20 feature a convenient fold-away reamer.
• No. 30 is rated for larger diameter steel and stainless steel tubing.
• No. 15-SI is especially designed for stainless steel tubing. Includes special roller bearings and
cutter wheel to make stainless cutting easier.
Part No. Model No. Description Std. Wheel Capacity Wt. Lb.
32910 10 Screw Feed Cutter F-158 1/8" – 1" 7/8
32915 10 Above w/H-D Wheel E-1240 1/8" – 1" 7/8
32920 15 Screw Feed Cutter F-158 3/16" – 1-1/8" 1-1/4
32925 15 Above w/H-D Wheel E-1240 3/16" – 1-1/8" 1-1/4
32930 20 Screw Feed Cutter F-158 5/8" – 2-1/8" 1-3/4
32935 20 Above w/H-D Wheel E-1240 5/8" – 2-1/8" 1-3/4
32940 30 Screw Feed Cutter E-2558 1" – 3-1/8" 3-1/2
32950 30 Above w/H-D Wheel E-2191 1" – 3-1/8" 3-1/2
97212 15-SI Screw Feed Cutter E-1525 3/16" – 1-1/8" 1-1/3
422 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HOLE CUTTING TOOLS / SHEARS
FEATURES:
• Quick Connecting Two-piece Design. This unique design allows for easy
mounting, transport and set up. In addition, weighing only 31 lbs., the unit
can be broken down into two lighter weight units for maximum transport
and operation comfort. This is particularly useful when working off a lad-
der or overhead.
• Single-hand Chain Latching. The Model HC300 features a patented spring-
loaded chain that saves time and significantly aids set up and operation.
• Ergonomic Design. With all controls at the operator’s fingertips, the tool
has been designed for maximum productivity.
• High Speed. With a powerful 1.2HP, 11 amp motor, the Model HC300
delivers 360 RPM to quickly bore holes while optimizing hole saw life.
• Horizontal and vertical flats to ensure perpendicular cutting.
Consists of:
• (1) Hole Cutting Tool (Base and Motor Assembly).
• (1) Chuck Key
Model HC-300 Hole Cutting Tool
Part No. Model No. Description
76777 HC-300 3" Hole Cutting Tool 115V
Note: The HC300 is not a hot tapping tool.
Hole Cutting Base
Hole Master™
Hole Cutting Base
The Hole Master™ (HCB) provides
a means of clamping onto pipe and
using a drill* to cut a hole in the
pipe. The Hole Master comes with a
base, chain and screw for clamping,
along with a plate and drill holder for
mounting a drill and hole saw to the
unit. The handle and gear provide
leverage for cutting holes in pipe.
The Hole Master has a pipe diameter
mounting range of 1-1/4” - 10” (42 -
273 mm). The Hole Master requires
a hole saw or bit (sold separately).
Use the Hole Master in depressurized
piping systems only.
WHY REED?
Features
lightweight
aluminum castings
with built-in
handles.
Shown with drill
and hole saw
which are sold
separately.
Part No. Model No. L X W X Th Description
HCB-475M 08441 13" x 12" x 5" Fits up to 4-3/4" dia. hole saw
HCB-475D 08442 13" x 12" x 5" Fits up to 4-3/4" dia. hole saw
• 08441 HCB-475M fits Milwaukee® 1660-1 and 1660-6 1/2” Compact Drill
• 88442 HCB-475D fits DeWalt® DW131 Spade Handle Drill
Clean Room Ratchet Shears
The Reed RS1C and RS2C ratchet shears
offer good mechanical advantage and
smooth, easy operation. Unpainted natural
finish and food-grade lubricants assure
no paint chips or out gassing. Blades are
resharpenable and replaceable.
Part Model
No. No. Cap. Len. Wt.
RS1C 04676 1.7" 8.3" 1.0 lbs.
RS2C 04677 2.4" 17.0" 2.5 lbs.
Part Model Re[placement Blade
RS1B 94175 RS1C Blade
RS2B 94175 RS1C Blade
RS1C
RS2C
Model HC-300
Hole Cutting Tool
Specifications
Motor: Universal, 110V or 230V
25-60Hz 11 amp, 1.2 HP,
UL/CSA listed.
Motor: 360 RPM (No Load)
Hole Cutting
Capacity: up to 3"
Chuck Size: 1/16" – 1/2"
Pipe Diameter
Mounting Range: 1-1/2" – 8"
Weight: 31 lbs.
423
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TAPPING TOOLS
RT1000 Tapping Tool
Part No. Model No. Description Wt. Lb.
83567 RT1000 RT1000 Tapping Tool CTS Set 16
83302 RT1000 RT1000 Tapping Tool Only 6
83307 — RT 1000 Tool Box 7
76022 — Ratchet Wrench 2
83317 — 3/4" CTS Adapter 0.3
83322 — 1" CTS Adapter 0.3
83337 — 3/4" NPTM Adapter 0.3
83347 — 1" NPTM Adapter 0.3
83327 — 3/4" Mueller® 110 Compression Adapter 0.3
83572 — 1" Mueller 110 Compression Adapter 0.3
FEATURES:
• Compact and lightweight, the tool is great for tight quarters and
awkward locations.
• Sturdy machined construction and corrosion-resistant materials
combine to provide dependable lifelong operation.
• Independent cutter feed mechanism gives the operator full con-
trol of drilling to optimize cutter performance and service life.
• Taps steel, cast iron, ductile iron and plastic pipe.
• Coupon retaining bits give you the confidence that the coupon will
not be dropped in the pipe, preventing medium contamination or
possible damage of downstream equipment.
Consists of:
RT1000 Tapping Tool, 3/4", 1" CTS Corporation Adapter, Small
Shaft Extension, Small Saw Arbor, 1/4" Pilot Bit, Ratchet Wrench,
(2) Spud Wrenches, Tool Box.
Note: Cutters are not included.
Note: The RT1000 uses the same drills and hole saws as the
RT3422 and the MLT3401 saddle tapping tool. The RT1000’s
maximum capacity is 1".
FEATURES:
• Heavy-Duty Design. .
• Built-in bleed valve. Allows for easy purge of chips.
• Independent cutter feed gives the operator total independent
control of the cutter feed rotation for optimal saw life.
• Capable of tapping into steel, cast iron, ductile iron and plastic
pipe.
• Versatility. The RT3422 is capable of tapping mains of:
– Water up to 500 psig.
– Steam, air and natural gas up to 150 psig.
• Coupon retaining bits. Exclusive pilot bits give you the confi-
dence that the coupon will not be dropped in the pipe, prevent-
ing medium contamination or possible damage of downstream
equipment.
Consists of:
The RT3422 sets include RT3422 tapping tool with bleed valve,
shaft extensions, heavyduty hole saw arbors, 1/4" and 3/8" coupon
retaining pilot bits, ratchet wrench, (2) spud wrenches, and 5
valve adapters in a steel tool box. Cutters are available separately
Specifications
Tapping Capacity: 3/4" – 1"
Mounting: Saddle, Welded Nipple, Weld-o-let®,
Thread-o-let®
Activation: Hand Ratchet, Air Ratchet, Right
Angle Drill
Cutter Field: Rotation of sleeve around an acme
threading barrel
Pressure: Water, 150 psig @ 100°F, Steam,
Air, 100 psig @ 370°F
RT3422 Tapping Tool
Specifications
Tapping Capacity: 3/4" – 2"
Mounting: Saddle, Welded Nipple, Weld-o-let®,
Thread-o-let®
Activation: Hand Ratchet, Air Ratchet, Right
Angle Drill
Cutter Travel: 14"
Cutter Field: Rotation of sleeve around an acme
threading barrel
Pressure: Water, 500 psig @ 100°F Steam,
Air, and Natural Gas, 150 psig @
370°F
Part No. Model No. Description Wt. Lb.
75982 RT3422 Tapping Machine Only 18
75992 RT3422 3/4" - 2" NPT Set (Male) 30
91192 RT3422 3/4" - 2" CTS Set (Flared) 30
76017 — Tool Box 7
76022 — 11/16" Wrench
424 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TRISTAND VISES
No. 460 Portable Tristand Vises
No. 425 Portable Tristand Vise
Model 460 Tri-Stand Chain Vise
Complete with slots for Hanging Tools, Pipe Rest, Three Pipe
Benders and Ceiling Brace Screw
• Integral legs and tray fold in for easy carrying and set-up
• Large vise base overhangs front legs for clear tool swing
• 40% larger work surface, increased pipe capacity
• 6” wider, rear support and receding ceiling brace screw
Part Model Pipe Capacity Weight
No. No. Description in mm lb kg
72037 460 Portable TriStand Chain Vise 1/8-6 3-150 47 21.0
Model 425 Tri-Stand Chain Vise
Integral legs and tray fold in for easy carrying and setup. Large
vise base overhangs front legs for clear tool swing.
• Complete with slots for hanging tools, pipe rest, three-pipe benders,
and ceiling brace screw.
• Features “quick grab”, self-locking latch and carrying handle for
ease of transport
• 6” wider, rear support and receding ceiling brace screw
Part Model Pipe Capacity Weight
No. No. Description in mm lb kg
16703 425 Portable TriStand Chain Vise 1/8-2 1/2 3-60 48.5 22
No. R450+ Series TriStand
Model R450+ TriStand Tripod Vise
Reed Tripod vises remain the sturdiest on the market. Tripods are manu-
factured with the heaviest gauge steel, overlapping hinges, and the best
adjutable tray clamp, not a set screw, to keep the lower tray assembly and
entire portable workbench tight—even after many hours of use! The heavy-
duty design permits use with pipe up to 6” in diameter. Tripod fold into a
compact shape, has a padded handle grip, and boast the lightest weight for
the easiest portability of all well-known Tripods
Part Model Pipe Capacity Weight
No. No. Description in mm lb kg
02306 R450+ Portable TriStand Chain Vise 1/8-6 10-178 36.3 16.5
425
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE STANDS
Part No. Model No. Description Height Adj. Max. Pipe Cap. Wt. Capacity Wt. Lb.
56657 VJ-98 V Head Low Pipe Stand 20" – 38" 12" 2500 21
56662 VJ-99 V Head High Pipe Stand 28" – 52" 12" 2500 23
37997 BTH-9 Ball Transfer Head F/VJ — 12" 1000 5
56667 RJ-98 Roller Head Low Pipe Stand 23" – 41" 12" 2500 24
56672 RJ-99 Roller Head High Pipe Stand 32" – 55" 12" 2500 27
56682 CJ-99 Conveyor Head High Stand 29" – 44" 12" 2500 19
42505 46 Adjustable Pipe Support 23" – 33" 6" 2500 23
42510 92 Adjustable Pipe Support 32" – 41" 6" 2500 28
83380 965 Support Stand for Groovers 26" – 42" 12" 2500 29
64642 AR-99 Adj. Roller Stand with steel wheels — 36" 2500 30
96372 RJ-624 Large Diameter Pipe Stand 16" – 31" 24" 4500 167
A full range of Heavy-Duty Adjustable Pipe Stands are available in varying configurations with capacity
from 1/8" – 36"; suitable for use with Threading Machines, Roll Groovers, etc.
No. AR-99No. VJ-98 / 99
No. CJ-99No. 92 No. 965
No. BTH-9 No. RJ-624
No. RJ-98 / 99
426 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
JACK STANDS
Jack Stands
Two Models of Jack Stands to Suit your Welding Needs ...
Heavy Duty
The Original Jack
Stand!
The first commercially
produced jack stand
constructed out of rugged
1” steel tubing, tested
by dependent labs for
excessive loads.
Pro Jack
Uses the same head
styles as Heavy Duty
Jack but the tri-stand
legs are made out of
formed steel to suit all
budgets. Lo Jacks
For larger shapes
or pipe over 24” in
diameter
Maximum
35”
Hi Jacks
For perfect work height
on shapes or pipe 24” in
diameter or smaller
Maximum
20”
Maximum
35”
Maximum
47”
…Plus A Choice of 6 Head Styles for Every Application
Ball Transfer Steel Wheel Rubber Wheel Bar Stock Pipe Stand
Model Vee-Head Head Head Head Head Head
Capacity 2,000 lb 1,000 lb 2,000 lb 1,000 lb 2,000 lb 1,000 lb
Pipe Size 1/8" - 48" 3/8" - 24" 1/2" - 24" 1/2" - 24" 1/8" - 10" (Flat) 3/8" - 10"
Application General welding of For rotation of Roll Welding of Non-marring Machining flats and Supports pipe for
pipe shapes, pipe or tubing in pipe and rounds surface, roll shapes min max threading and
solids and rounds all directions welding of pipes heights: grooving machines
and rounds Hi Pro 28 - 40-1/2
Lo Pro 28 - 22-35
Hi HD 29 - 43-1/2
Lo HD 21 - 29
Hi FAJ 29-1/2 - 43-1/2
Lo FAJ 21-3/4 - 29-1/4
Available in Yes No Yes No Yes No
Stainless Steel
427
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE HANDLING EQUIPMENT
Part No. Description Weight
782699 Cricket 70 lbs.
Cricket
More than a Pipe Buddy!
• Transport 20 foot pipe lengths up to 1,000 pounds
• Ideal job-site material and job-site carrier
• Comes with ratchet hold down strap and 16” tube tires
• Quick handle disconnect for compact storage
• Uses leverage to lift pipe
• Great for flanges - fittings
and valves
Grasshopper
Texas Pipe Dolly
• Fits through 35” openings
• Enables one man to move up to 2,000 pounds
• Special sliding chain block design accommodates long & short loads
• Carries up to 20” diameter pipe toolboxes - fittings and valves
• Chains can be used to lock wheels and tries for security
• Rugged high-pressure tires and wheels allow construction-site mobility
Part No. Description Wt. L W H
780351 ST-401 Grasshopper 165 lbs. 12' 36" 40"
Wt. L. W H.
2,000# 20" 20" 40"
Load Capacity
Level…
Layout…
Fit-Up…
Tack…
Roll-Out…
All In One Step!
Flange Pins
For Accurate Alignment of Pipe Flanges
• Quick installing pins works as convenient reference points to
level flange for tack and weld-out - no tools needed
• Hardened tapered pins automatically center on 5/8” to 1-5/8”
holes
• Features Acme threads for maximum clamping power and
hardened tool steel for long lasting uçse
Part No. Description Weight
780430 ST-106 Flange Pins 4 lbs.
780429 ST-206 SS Flange Pins 4 lbs.
Adjust-A-Fit®
Fastens directly onto
fittings for loads up to
1,000 lbs
• Makes lining up fittings
a trouble free - one man
operation
• Uses gravity to bring fittings
to exact plumb or any angle
up to 45°
• Threaded shaft assembly is hardened for long tool life
• Cloverleaf setscrew and threaded shaft handle work from either side
Part No. Description Weight
780420 ST-104 Adjust-A-Fit 11 lbs.
Adjust-A-Flange®
Handles loads up to 1,000
pounds
• Fits all flanges for 5” pipe and larger with
bolt holes 3/4” to 1-1/58”
• Used in combination with the Adjust-
A-Fit® to bring pipe flanges to exact
plumb for tack and weld out
• Eliminate 75% of the hard work in
pipe fitting when used with the Adjust-
A-Fit® and Roust-A-Bout®
• Flange nuts serve as convenient
reference points to check level
Part No. Description Weight
780425 ST-105 Adjust-A-Flange 11 lbs.
Adjust-A-Rolls®
Perfect pipe fabrication stand for job or shop use
• Roller adjustment from either side
• Clean and simple design avoids welder interference
• Wheels trued for true pipe rotation
• Handle large enough to work with gloved hand
428 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MATERIAL LIFTS
2100 Options:
1.Cable Safety Brake
Each mast and carriage can have a factory installed, gravity
actuated safety brake which holds loads in place in the event the
cable should go slack
2.Fork Extensions (No. 783535 )
With the push of a button, forks may be extended from 28" to
42". With longer forks, the weight capacity decreases to 200 lb.
and is clearly shown on the forks when extended. A second but-
ton returns the extension for convenient storage inside the forks
3.Boom Carriage (No. 783642 )
Ideal for installing pipe or lifting “from the top” applications.
Uses four attaching plunger pins and has a 40" reach. Hook has
five locations and load capacity decreases the farther out the
boom is extended (from 650 lb. to 200 lb.)
Series 2100 Contractor Lifts
Great all around Contractor Lift!
• 12', 18' & 24' heights
• 650 lb capacity
• Rolls through standard doorways & tail gates
• Loading Bar - great for overhead cranes
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed - no loose parts
• Variety of attachments
• Large 7/32" load cable
• Lockable, 5" polyurethane casters
• Load cable feeds inside mast (no more exposed cable just inches away from operator's face)
This compact lift offers stronger mast design and a superior cabling system. The shorter
mast sections allow the 2000 to travel through doorways without tipping and to fit nicely
into vehicles with small storage space.
Base Unit is NOT Recommended for Lifting Pipe unless used with
Optional Boom Carriage (P/N 783642)
2118 2124 - See Below
Series 2100 Contractor Lift Specifications
Dimensions 2112 2118 2124
Height - stowed 84" 84" 84"
Length - stowed 34" 34" 34"
Height - operating 84" 84" 84"
Length - operating 62" 73" 73"
Base width 31.25" 31.25" 31.25"
Width with stabilizer legs 74" 74" 74"
Ground clearance 2.5" 2.5" 2.5"
Load height (minimum) 6" 6" 6"
Maximum height (forks down) 11’1" 16’6" 21’11"
Maximum height (forks up) 13’1" 18’6" 23’11"
Standard Fork width 21.5" 21.5" 21.5"
Standard Fork length 28.0" 28.0" 28.0"
Weight
Net weight 252 lb 321 lb 366 lb
Load Capacity
Load capacity, 14" load center 650 lb 650 lb 650 lb
Load capacity, with fork extensions 200 lb 200 lb 200 lb
Fork Specifications
Standard fork width 21.5" 21.5" 21.5"
Standard fork length 28" 28" 28"
Fork length with extensions 42" 42" 42"
Fork weight 32 lb 32 lb 32 lb
Fork weight with extensions 38 lb 38 lb 38 lb
2112
429
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE HANDLING EQUIPMENT / PIPE FREEZE TOOLS
Part Weight Max.
No. Description lb A B C/D Base Heights
780300 R-100 Roust-A-Bout 15’ Top Height 311 79” 20” 12” 32 x 40” 15’
780301 R-150 Roust-A-Bout 15’ Top Height 311 79” 20” 12” 40 x 40” 15’
780302 R-180 Roust-A-Bout 18’ Top Height 337 126” 25” 14.5” 50 x 50” 18’
780303 R-250 Roust-A-Bout 25’ Top Height 381 119” 30” 17.5” 60 x 60” 27’
Pipe Freeze Tools
Roust-A-Bout
• This dependable life can raise a 1,500 lb load to height up to
25 feet in minutes
• In addition, the load can be moved vertically and horizontally at
the same time
• Wider loads (up to 1,000 lb) can be handles with the addition of
Sumner’s Tee Head Extension Bar
• The Roust-A-Bout eliminated the need for many other tools such
as Come Alongs, Scaffolds, Monorails and Swing Booms.
Roust-A-Bout
Tee-Head Extension Bar
Lift wider loads with the Sumner Roust-A-Bout
• Expands the Roust-A-Bout for handling bulky loads up to 1,000 lb.
• Takes only minutes to attach or detach.
Part Weight
No. Description lb A B C
780010 R-100/150 Tee Head Extension Bar 21 22” 43” 48”
780011 R-200 Tee Head Extension Bar 24 29” 58” 63"
780012 R-250 Tee Head Extension Bar 33 37” 73” 78”
Tee-Head Extension Bar
Super Freeze™ Pipe Freezing Tools
The Ridgid SF-2000 and SF-2500 SuperFreeze Pipe Freezing tools are self-contained
refrigeration units that freeze steel pipe and copper tube.
The in convenience of shutting off and draining complete water systems is no longer
necessary - simply isolate the section you need to repair using the SuperFreeze Pipe
Freeze Tool and perform your work while the unit continues to operate.
CSA/UL Approved.
Specifications
Capacity: Steel Pipe: 1/2" – 2"
Copper Tube: 1/2" – 2-1/2"
Compressor: 115V, 60 Hz, 4.3 A or 230V, 50 Hz, 2.4 A
Refrigerant: R-507 (14.2 oz. charge)
Weight: 55 lb.
Hose Length: 8.5 ft. (17 ft. span)
Dimensions: L=21", W=10.5", H=13"
Part No. Description
68967 SF-2500 Pipe Freezing Kit
430 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VISUAL INSPECTION EQUIPMENT
SeeSnake® Drain & Sewer Inspection Equipment
Owning a Ridgid® SeeSnake® system expands your service capa-
bilities and gives you the confidence and credibility to win more
work. More than 95% of SeeSnake System owners report increas-
ing their sales and profits after purchasing a Ridgid® SeeSnake®
System.
The entire Ridgid® SeeSnake® line of pipe inspection equipment is
built to endure the toughest residential, commercial and industrial
environments.
Reels & Cameras
Ridgid® SeeSnake® reels and cameras are the best in the industry
because they are built tough for unmatched performance and
longevity.
Camera Head
• Scratch-resistant, debris-shedding sapphire crystal lens.
• 100% stainless steel housing.
• High power adjustable LEDs behind a thick polymer plastic
window.
• 410,000 CCD pixel resolution
• Small camera diameter size (22 mm - 35 mm)
• Pipe view (wide angle) technology to be able to clearly see the
pipe wall.
• Self-leveling option.
• Tested water-tight to 330' in length.
Push Cable
• Fiberglass inner core.
• Polypropylene jacket.
• Integrated push cable with power/video signal.
• 512Hz FleXmitter® transmitter included with all systems.
Monitors & Recorders
Ridgid® SeeSnake® monitors are available in various styles to meet
your needs and are designed to be rugged, portable and durable.
A new line of monitors use the Ridgid® 18V Li-on battery so you
can take your SeeSnake monitor to work in places it has never
been before. Includes a line trace peg to enable you to easily
locate the entire push cable with a locator and transmitter.
Recording Accessories
Ridgid® SeeSnake® modular recording capability allows you to add
the latest recording capabilities to new monitors as well as any
legacy monitor with a video output. The recording accessory line
allows you to buy the configuration you want while maintaining the
option to easily upgrade your recording capabilities in the future.
431
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
VISUAL INSPECTION EQUIPMENT
SeeSnake
microDrain
SeeSnake
Compact
SeeSnak
FlatPack
Mini-
SeeSnake
Plus
SeeSnake
Plus
SeeSnake Plus
Self-Leveling
Camera
Applications Toilets/Sinks/Lines Main Drain Lines Main Drain Lines Industrial Industrial Industrial
Line Capacity 1-1/4" to 3" 1-1/2" to 4" 1-1/2" to 4" 1-1/2" to 6" 2" to 12" 2" to 12"
Maximum Run 30' 100' 100' 200' 325' 325'
Sonde Transmitter Optional 512Hz 512Hz 512Hz 512Hz 512Hz 512Hz
Distance Measurement — Built-In Counter —– CountPlus®CountPlus®CountPlus®
Mechanical
Weight (Excl. Monitor) 7.3 lbs. 12 lbs. 11 lbs. 24.5 lbs. 43 lbs. 43 lbs.
Reel/Frame Diameter 12.75" 16" 24" 20" 32" 32"
Camera Diameter 0.87"/22 mm 1.18"/30 mm 1.18"/30 mm 1.365"/35 mm 1.365"/35 mm 1.365"/35 mm
Camera Length 0.87"/22 mm 1.68"/42 mm 1.68"/42 mm 1.68"/42 mm 1.82"/45 mm 1.82"/45 mm
Push Cable Diameter 0.33"/8.3 mm 0.26"/6.6 mm 0.26"/6.6 mm 0.31"/8 mm 0.44"/11 mm 0.44"/11 mm
Environmental
Operating Temperature -4° to 104° F 32° to 104° F 32° to 104° F 32° to 104° F 32° to 104° F 32° to 104° F
Waterproof Depth 266' 330' 330' 330' 330' 330'
Video 510 x 496 768 x 494 768 x 494 768 x 494 768 x 494 768 x 494
Number of Pixels 250 410 410 410 410 410
Lighting 3 Luxeon LEDs 6 Luxeon LEDs 6 Luxeon LEDs 6 Luxeon LEDs 6 Luxeon LEDs 6 Luxeon LEDs
Camera All SeeSnake Reels and Cameras are compatible with all SeeSnake Monitors
SeeSnake® Reel & Camera Selection
LCD Pak Monitor DVD Pak Monitor MINIPak Monitor
Recording Capability View Only / *DVDBase Built in DVD Main Drain Lines
Screen Size 10.4" 4.3" OLED/5.7" LCD 5.7"
Screen Type LCD OLED/LCD LCD
Battery 1 or 2 18V Li-Ion 18V Li-Ion 18V Li-Ion
Battery Runtime 4.5 Hrs. (2 batteries) 2.5 Hrs 5 hrs
Integrated Line Trace Yes Yes Yes
Sonde Control 512Hz Push Button Push Button Push Button
Lighting Controls 10-Level Digital 10-Level Digital 10-Level Digital
Screen Operating Range 14° F to 122° F -30° F to 130° F -4° F to 158° F
Recorder Operating Range — 40° F to 95° F —
Resolution 640 x 480 320 x 240 320 x 240
DVDBase Recorder *Record inspection footage from any current or previous SeeSnake
Monitor with a video output
Color Monitors & Video Recorders
DVDBase Video &
Audio Recorder
• Records footage from any
SeeSnake monitor with
video output.
32678 115V DVDBase
Recording Accessory
33093 115V DVDBase
Recorder w/ Battery
& Charger
432 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VISUAL INSPECTION EQUIPMENT
SeeSnake® Monitors and Recorders
LCDPak Monitor Specifications
Display 10.4" Color LCD
Resolution 640 x 480
Power Source 1 or 2 -18 V Lithium-Ion Batteries or AC Plug
Dimensions 14.3" L x 11.9" W x 12.4" H
Output Composite Video out
Lighting 10 Level Adjustable LED Control
Recording None
Integrated Line Trace YES
Catalog Number
115V 230V Description Weight
31763 32598 LCDPak Monitor Only 16.2 lbs
32898 32773 LCDPak Monitor with (2) Batteries and charger 22.2 lbs
MINIPak Monitor Specifications
Display 5.7" Color LCD
Resolution 320 x 240
Power Source 18 V Lithium-Ion Battery or AC Plug
Dimensions 14" L x 7.6" W x 10" H
Output Composite Video out
Lighting 10 Level Adjustable LED Control
Recording None
Integrated Line Trace YES
Catalog Number
115V 230V Description Weight
32668 32688 MINIPak Monitor Only 3.9 lbs
32748 32953 MINIPak Monitor with Battery and Charger 7.9 lbs
DVDPak Monitor with Video & Audio Recorder Specifications
Display 4.3" OLED / 5.7" Color LCD
Resolution 480 x 272 / 320 x 240
Power Source 18 V Lithium-Ion Battery or AC Plug
Dimensions 3.8" L x 9.1" W x 4.8" H
Output Audio/Video (no playback output)
Lighting 10 Level Adjustable LED Control
Recording DVD-R, DVD+R, DVD-RW, DVD+RW, DVD+R DL
Integrated Line Trace YES
Catalog Number
115V 230V Description Weight
32923 34298 DVDPak Monitor Only (OLED) 7.5 lbs
33203 34308 DVDPak Monitor with Battery and Charger OLED 11.5 lbs
32673 34303 DVDPak Monitor Only (LCD) 7.5 lbs
33198 34313 DVDPak Monitor with Battery and Charger (LCD 11.5 lbs
433
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
VISUAL INSPECTION EQUIPMENT
SeeSnake® Plus Video Inspection Systems
1-1/2" Lines up to 200' - 2" to 12" Lines up to 325'
Catalog Number
115V 230V Description Weight
14053 14103 SeeSnake Plus, 200' color reel 43 lbs
14058 14108 SeeSnake Plus, 325' color reel 53 lbs
13988 13993 SeeSnake Plus Self-Leveling, 200' color reel 43 lbs
13998 14003 SeeSnake Plus Self-Leveling, 325' color reel 53 lbs
14063 14113 Mini-SeeSnake Plus, 200' color reel 24.5 lbs
3 Choices to Meet Your Needs
SeeSnake Plus Video systems offer unmatched reliability and per-
formance in a ruggedized package. Each system offers
• 100% hardened stainless steel camera head spring assembly.
• Rugged hi-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible
with Ridgid NaviTrak II and NaviTrak locators.
• Can be used with any SeeSnake Monitor or Recorder.
Mini-SeeSnake Plus
• 1-1/2" Lines up to 200'
• 1-1/2" 90's
• 2" P-Traps
• Ideal for where portability and maneuverability are crucial:
multi-stroy buildings, roof-tops, confined areas, etc.
SeeSnake Plus
• 2" to 12" Lines up to 325'
• 2" 90's
• 3" P-Traps
• Wide pipe diameter capacity range makes this system ideal for
a wide range of inspection needs.
SeeSnake Plus Self-Leveling Camera
• Same features as the SeeSnake Plus
• Includes an always upright, self-leveling camera design.
Mini-SeeSnake Plus
SeeSnake Plus
SeeSnake® FlatPack Inspection Systems
1-1/2" to 4" Lines up to 100'
Simple drum design and maximum reliability in a 100' reel. Designed with built-in transmitter
for easy locating.
• 100% hardened stainless steel camera head spring assembly.
• Rugged hi-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible with Ridgid NaviTrak II
and NaviTrak locators.
• Can be used with any SeeSnake Monitor or Recorder.
Camera System
• Scratch-resistant, debris-shedding, flush-mounted sapphire lens.
• Integrated transmitter
• Durable stainless steel camera head assembly and tapered spring assembly.
Reel
• 100' of push cable
• Debris-capturing, rotating drum with mercury-fee slip spring.
Catalog Number
115V 230V Description Weight
95567 95582 Color FlatPack Reel only 11 lbs
434 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VISUAL INSPECTION EQUIPMENT
SeeSnake® Compact Video Inspection System
1-1/2" to 4" Lines up to 100'
Catalog Number
115V 230V Description Weight
32903 32948 SeeSnake Compact, with battery & charger 20.9 lbs
32913 32753 SeeSnake Compact System 16.9 lbs
32658 32683 SeeSnake Compact Reel Only 13 lbs
SeeSnake Compact System offers fast setup for quick inspections. It's ultra portability makes this system an excellent complement to
your SeeSnake Plus Each system offers
• 100% hardened stainless steel camera head spring assembly.
• Rugged hi-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible with Ridgid NaviTrak II and NaviTrak locators.
• Can be used with any SeeSnake Monitor or Recorder.
Standard Equipment
• Battery port for use with optional 18B battery.
• AC/DC operation
MINIPak Monitor System
• High resolution monitor
• Push button controls for sonde power, lights, flip-screen and zeroing counter
• Splash resistant case with built in sunshade.
• Video In/Out jack
Camera System
• Scratch resistant, debris shedding, flush mounted sapphire crystal lens.
• Integrated transmitter.
• Durable stainless steel camera head assembly and tapered spring assembly.
Reel
• 100' of push cable.
• Debris capturing, rotating drum with mercury-free slip-ring.
• Counter to display distance on monitor n feet and inches.
SeeSnake® microDrain™ Video Inspection System
1-1/2" to 3" Lines up to 30'
The microDrain inspection system is a leap forward in small diameter sewer and drain
inspection technology. This system enables pipe inspection in places previously difficult to
inspect.
• Small diameter and tight turn radius camera head goes through many tolet traps
without the need to disassemble or dismantle plumbing fixtures.
• Multiple monitor capability utilizes any SeeSnake Monitor or the microEXPLORER™
digital inspection camera.
• Lightweight and compact design stows in service trucks and is easily carried.
Catalog Number Description Weight
Complete System
32928 microDrain/microEXLPORER System 8.6 lbs
435
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
VISUAL INSPECTION EQUIPMENT
• With the SeeSnake micro inspection camera you can now fix a variety of problems by us-
ing the standard attachments. With the magnet, remove small parts, fasteners etc. Using
the mirror attachment allows the user to see 90o away from the camera. The hook attach-
ment enables the user to grasp and manipulate small parts, wires, etc.
Part No. Description
31118 SeeSnake® micro™ Inspection Camera, 17 mm
26663 Replacement Imager Head and Cable, 17 mm
31123 SeeSnake® micro™ Inspection Camera, 9 mm
26663 Replacement Imager Head and Cable, 9 mm
26668 Accessory Pack (Mirror, Hook & Magnet)
31128 Universal 3' Cable Extension
31133 Universal 6' Cable Extension
• The 2.4" Color LCD
display provides
crisp, clear images
with remarkable
detail.
Ask your salesman for
a demonstration!
SeeSnake® micro™
SeeSnake® micro™ Inspection Camera
Detect and Diagnose the Unreachable!
• Easily perform visual inspections in hard to reach places.
• 2.4" Color LCD (160 x 234 resolution) display.
• Includes 3' cable with camera. (Expandable to 30')
• Complete with accessories: Mirror, Hook and Power Magnet.
• Waterproof to 10'
• Feature 2 adjustable LEDs for lighting dark spaces.
• Powered by (4) AA batteries.
SeeSnake® LT1000 Laptop Interface System
Leverage the Power and Flexibility of Your Laptop!
LT1000M
LT1000
By using a laptop as a monitor, your recording and monitoring options are as powerful as
your PC. Digital recording, DVD burning, Wireless Transmission and Online Hosting are all
possible with the LT1000 and a Laptop. Paired with a ruggedized laptop, the LT1000 is
the most powerful and flexible system on the market.
• Ultimate Flexibility in recording, monitoring and reporting. Unlock the power of your
Laptop to Monitor, Record and Communicate with SeeSnake HQ and RIDGIDConnect.
• Clean Keys Control Pad allows you to keep gloved hands off your Laptop while con-
trolling camera recording and operation during an inspection.
• Li-Ion battery lets you perform inspections without the availability of AC power.
• Laptop Stabilization System allows you to secure and stabilize your Laptop on the reel
for protection in the field (full LT1000 System only).
LT1000
The full LT1000 system mounts directly on your Mini or Standard Reel giving you a
stacked and stable platform with a single cord interface.
Compatibility: All SeeSnake Mini and Standard Reels
LT1000M
The LT1000M is a detached system that allows you to interface with any SeeSnake Reel.
Compatibility: All SeeSnake Reels
Includes: SeeSnake HQ Monitoring/Recording Software, 3' USB Cable, LT1000M Frame,
AC Power Cable
Call Today for Complete
Information and Specifications!
436 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
12V Li-Ion M-Spector™
AV Multimedia Inspection
Cameras
With the addition of picture, audio and
video capabilities, professionals can now
inspect and document issues, download
the information to their computer and
send visual confirmation to a customer or
supervisor for review. Available with a 17 mm
digital flexible camera cable (2311-21) for
general applications or a 9.5 mm analog
flexible camera cable (2312-21) for auto-
motive applications.
FEATURES:
• 2GB Memory Card (included) records 90
minutes of audio/video or 7,600 photos
• USB Cable - download files to a computer
• Integrated microphone and speaker
• Rotate both live and captured images
• 4X zoom, 4X LED brightness control, and
auto-shut off
• 3' and 8' extension cables (Recommend-
ed maximum extension is 19')
• KIT Includes 3' Camera cable, 2GB
Memory Card, USB Cable, Battery,
Charger and Carrying Case.
2310-22 Specifications
Volts: 12 V DC
LCD Display: 3.5" Hi-Res Color
Camera Head Dia.: 0.7" (17 mm)
Adj. Image Zoom: 4X
LED Brightness Adjust: (4X) Control
Cable Length 3'
Part No. Description
2311-21 M-Spector™ AV Multimedia
Camera Kit (17 mm Cable)
2312-21 M-Spector™ AV Multimedia
Camera Kit (9.5 mm Cable)
2311 Accessories
Part No. Description
48-53-0110 3' Camera Extension Cable
48-53-0140 8' Camera Extension Cable
48-53-0125 Replacement Camera Cable
2311-21
VISUAL INSPECTION EQUIPMENT
microEXPLORER™ Digital Inspection Camera
Find It. Record It. Share It.
A completely integrated digital platform that allows you to
find, record and share detailed images and video of hard to
reach places. Equipped with many advance features includ-
ing self-leveling, pan, and 3X Digital Zoom to help achieve an
extremely accurate inspection.
Benefits
• Capture and archive images and videos as part of a more
effective preventative maintenance program.
• Download images and videos to a computer and e-mail
them to a colleague.
• Self-leveling picture maintains a consistently up-right im-
age and eliminates the the need to twist the camera into
correct position.
• 4 high intensity LEDs and low light vision control allows
for inspections in the darkest of areas.
• High resolution camera and high quality 3.5" digital LCD
screen clearly identifies cracks in heat exchangers and
defects in welds or castings, etc.
Reel
• 100' of push cable.
• Debris capturing, rotating drum with mercury-free slip-ring.
• Counter to display distance on monitor n feet and inches.
microEXPLORER Specifications
Display 3.5" Color LCD (320 x 420 resolution)
Image Capture JPG Images (1280 x 1040) AVI Video (320 x 240)
Recording Medium Internal Memory or SD card
Image Controls Pan, Zoom, Self-Leveling, Low-Light Vision
Camera Diameter 0.7" (17 mm)
Cable Reach 3' (expandable to 30' with optional extensions)
Waterproof Camera and Cable to 10'
Power Source 3.7 V Li-Ion battery (4 hrs. continuous run-time)
Catalog Number Description Weight
30063 microEXPLORER Digital Inspection Camera 1.93 lbs
30083 Replacement Camera Head 0.82 lbs
30203 Accessory PAck (Mirror, Hook, Magnet) 0.11 lbs
30198 Replacement 3.7V Li-Ion Battery 0.24 lbs
30208 DC Adapter 0.26 lbs
30073 Audio Memo Recorder 0.26 lbs
31128 Universal 3' Cable Extension 0.75 lbs
31133 Universal 6' Cable Extension 1.5 lbs
Includes Carrying case, Operators Manual, (1) Li-Ion Battery, Battery Charger, USB
cable, Hook, Magnet, Mirror
SeeSnake Digital Adapter
With the RIDGID® microEXPLORER™ Digital Inspection Camera and
the new SeeSnake® Digital Adaptor, you’ll immediately add digital im-
age and video recording capabilities and a secondary playback screen
to your existing drain inspection monitor. Or, use the microEXPLORER
Camera separately for out-of-pipe applications.
Catalog No. Description Weight
34953 SeeSnake Digital Adapter 1.32 lbs
437
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
UTILITY LOCATORS
Proximity Signal
Current Strength/
Signal Angle
Signal Strength
Target Line
Depth/Distance
Left/Right Guidance Arrows
SeekTech® Utility Line Locators
Performance and Features
•Target Line – Guides operator down the line and
shows changes in direction. Indicates when distortion
is present to avoid erroneous locates.
•Left-Right Guidance Arrows – Points operator to
target utility.
•Proximity Signal and Signal Strength – Helps the
operator to center the locator closer to the target.
•Continual Depth – Shows depth changes in real time.
•Omni-Seek® – Increases accuracy and efficiency when in
passive mode. Continuously searches passive power and
radio bands to locate and avoid unknown metallic lines.
•User-defined frequencies – SeekTech SR-60 can be
set to any frequency between 10 Hz and 490,000 Hz
making it an universal receiver. SeekTech SR-20 can be
set between 10 Hz and 35,000 Hz.
SR-20 Line Locator
A lightweight, rugged receiver that provides all the information
needed for faster, more accurate locates.
Standard Equipment
• Hard Plastic Carrying Case
• Surface Markers and Clip
• Instructional DVD
• Operator's Manual
• 4 C-Cell Batteries
SR-20 Specifications
Active Line
Frequencies
128 Hz, 1 kHz, 8
kHz, 33kHz
Passive
Power Trace
50 Hz, 60 Hz,
<4kHz Broadband
Passive Radio
Trace
4 kHz - 15 kHz,
15 kHz - 36 kHz
Sonde
Frequencies
16 Hz, 512 Hz,
640 Hz, 850 Hz,
8 kHz, 16 kHz, 33
kHz
Power Source 4 C-Cell Batteries
Battery Life Approx. 16 hrs.
Weight 3.5 lbs
Meets FCC Class A Requirements
Catalog No. Description Weight
21893 SeekTech SR-20 Line Locator 4 lbs
16728 Remote Transmitter, 512-AAA —
22473 SR-20 Case 9 lbs
SR-60 Line Locator
The fastest, easiest, most versatile receiver available.
Versatility
• Can trace any frequency from
10 Hz to 490,000 Hz
• Can trace energized lines and
sondes simultaneously.
• All the ease and accuracy of
the SR-20 but with ALL locat-
able frequencies.
• Choose the SR-60 for fast,
confidant locates even under
tough conditions (poor
conductors, solid conditions,
poor grounding, etc.
Standard Equipment
• Hard Plastic Carrying Case
• Surface Markers and Clip
• Instructional DVD
• Operator's Manual
• 4 C-Cell Batteries
SR-60 Specifications
Active Line
Frequencies
128 Hz, 1 kHz, 8 kHz, 33 kHz, 51 kHz, 93 kHz,
200 kHz, 262 kHz
Passive Power
Trace 50 Hz, 60 Hz, <4kHz Broadband
Passive Radio
Trace 4 kHz - 15 kHz, 15 kHz - 36 kHz
Sonde
Frequencies**
16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHz, 16
kHz, 33 kHz
Power Source 4 C-Cell Batteries
Battery Life Approximately 16 hrs.
Weight 5.1 lbs
Meets FCC Class A Requirements
** 30 user defined frequencies can be set from 10 hz to 490,000 Hz
Catalog No. Description Weight
22163 SeekTech SR-60 Line Locator 5.1 lbs
29798 S60 Case 5 lbs
438 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
UTILITY LOCATORS
SeekTech® Utility Transmitters
All RIDGID transmitters generate a signal onto the buried
cable in one of three ways:
• Direct connection using connection cords.
• Induction with the optional inductive signal clamp
• Induction from the transmitter
SeekTech ST-33Q Line Transmitter
• The ideal transmitter for inducing current onto a target line
• Increase efficiency and trace further by inducing over 8 times
more current than the competition onto a target line.
• The most versatile transmitter available with any direct con-
nect frequency between 10 Hz and 490 kHz.
Frequencies
Direct Connect
(Factory Set) 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz, 262 kHz
Direct Connect
(User Set) 10 Hz – 490 kHz
Induction 8 kHz, 33 kHz
Catalog No. Description Weight
26168 SeekTech ST-33Q Transmitter 11.1 lbs
20503 SeekTech 4" Inductive Signal Clamp 2 lbs
SeekTech ST-510 Line Transmitter
• 10 watts of fully variable power output.
• LCD display provides instant visual feedback on line resistance
and current flow.
• Two 25' lead wires with heavy duty clips.
• Compatible with competitive equipment.
Frequencies
Direct Connect 128 Hz, 1 kHz, 8 kHz, 33 kHz, 262 kHz
Induction 1 kHz, 8 kHz, 33 kHz, 262 kHz
Catalog No. Description Weight
21903 SeekTech ST-510 Transmitter 5.8 lbs
20503 SeekTech 4" Inductive Signal Clamp 2 lbs
SeekTech ST-305 Line Transmitter
• Lightweight and compact transmitter that delivers up to 5
watts of power.
• Can transmit 2 frequencies simultaneously.
• Audio feedback confirms a good circuit before beginning trace.
Frequencies
Direct Connect 1 kHz, 8 kHz, 33 kHz, 262 kHz
Induction 1 kHz, 8 kHz, 33 kHz, 262 kHz
Catalog No. Description Weight
21898 SeekTech ST-305 Transmitter 2.5 lbs
20503 SeekTech 4" Inductive Signal Clamp 2 lbs
SeekTech Inductive
Signal Clamp
• Allows users to apply a signal
to cable or pipe when a direct
connection is not possible.
• Compatible with all RIDGID
transmitters.
Catalog No. Description Weight
20503 SeekTech 4" Inductive Signal Clamp 2 lbs
439
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BATTERY POWERED CRIMPERS
ProPress® RP 330-B Battery Crimp Tool Kit
1/2" to 4" Capacity
For convenience and portability, the RP330-B is the logical
choice. Featuring a barrel that rotates 270 degrees and a longer
service interval, the RP330-B is designed to handle your toughest
construction projects. Powered by a 18V Lithium-Ion Battery, the
RP330-B offers 50% more presses per battery charge than our
previous model!
Specifications
• Capacity:1/2" – 4"
• 270°Barrel/Jaw Swivel
• Battery: 18V Li-Ion
• Battery Charger:115V
• Hydraulic Ram Output: 7,200 lbs. (32kN)
• Weight: 9.8 lbs. with Battery
• Operating Temperature Range:15°F to 122°F
• Approximate Cycle Time:5 seconds
•Standard Kit includes: RP330-B Press Tool, 2 Batteries, Battery
Charger and Carrying Case
• Compatible with all RIDGID®Standard Series Pressing Attachments
• For use with Copper, Stainless Steel and PEX Tubing
• Approved by UL to UL and CSA standards
Catalog No. Description Weight
27913 RP330B ProPress Kit without jaws 21.75 lbs
27918 RP330B ProPress Kit with 1/2" - 1"
Jaw Sets (copper & stainless steel) 33.8 lbs
27923 RP330B ProPress Kit with 1/2" - 2"
Jaw Sets (copper & stainless steel) 54 lbs
32743 Battery, 18V 2.2 Ah Lithium-Ion 1.5 lbs
27958 115V Charger 1.25 lbs
27933 RP 330 Carrying Case 10.25 lbs
270°
Battery-Operated Press Tools
ProPress® RP 330-C Corded Crimp Tool Kit
1/2" to 4" Capacity
Same features as the RP 330B but in a corded version.
Catalog No. Description Weight
27938 RP330C ProPress Kit without jaws 19.6 lbs
27943 RP330C ProPress Kit with 1/2" - 1"
Jaw Sets (copper & stainless steel) 31.75 lbs
27948 RP330C ProPress Kit with 1/2" - 2"
Jaw Sets (copper & stainless steel) 52 lbs
ProPress® RP 210-B Compact Battery Crimp Tool
1/2" to 1-1/4" Capacity (Copper & Stainless Steel)
3/8" to 1-1/2" Capacity for PEX
For a fast and reliable way to join copper, stainless steel and
PEX, the new RP 210-B has more capacity than any compact
press tool on the market. This model is 2 inches shorter and 25%
lighter than our previous compact tool and features the longest
service interval available (32,000 cycles), an improved swiveling
barrel and a powerful 18V Lithium-Ion battery.
Specifications
• Capacity:1/2" – 1-1/4" for copper and stainless steel; 1/2" -
1-1/2" for PEX
• Compatible with all RIDGID compact series pressing attach-
ments
• 270°Barrel/Jaw Swivel
• Battery: 18V 1.1 Ah Li-Ion
• Battery Charger:115V
• Hydraulic Ram Output: 5,400 lbs. (24kN)
• Weight: 6.4 lbs. with Battery
• Operating Temperature Range:15°F to 122°F
• Approximate Cycle Time:5 seconds
•Standard Kit includes: RP210-B Press Tool, 2 Batteries, Battery
Charger and Carrying Case
Catalog No. Description Weight
31048 RP210B ProPress Kit without jaws 16 lbs
31028
RP210B ProPress Kit with 1/2" -
1-1/4" Jaw Sets
(Copper & Stainless Steel)
26 lbs
31038 RP210B ProPress Kit with 1/2" - 1"
Jaw Sets (PureFlow PEX) 24 lbs
31033 RP210B ProPress Kit with 1/2" - 1"
Jaw Sets (ASTM PEX) 23 lbs
31013 Battery, 18V 1.1 Ah Lithium-Ion 1 lbs
27958 115V Charger 1.25 lbs
31023 RP 210B Carrying Case 10.25 lbs
270°
Standard Series® ProPress XL-C™ Rings
For 2-1/2" - 4" Copper Tube
For use with ProPress® XL-C Copper Fittings
Catalog No. Description
20483 XL-C Ring Kit
440 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BATTERY POWERED CRIMPER ACCESSORIES
Press Jaws for Crimpers
Compact Series
Press Jaws
For Copper &
Stainless Steel
40% lighter and 33% smaller than Standard Series Jaws. Use
only with RIDGID Compact Pressing Tools.
Catalog No. Description Weight
16958 1/2" Jaws for Compact ProPress 2.5 lbs
16963 3/4" Jaws for Compact ProPress 2.5 lbs
16978 1" Jaws for Compact ProPress 2.5 lbs
Compact Series Press Jaws
For PureFlow PEX
Catalog No. Description Weight
17003 3/8" Jaws for PureFlow 2.5 lbs
17008 1/2" Jaws for PureFlow 2.5 lbs
19813 5/8" Jaws for PureFlow 2.5 lbs
17013 3/4" Jaws for PureFlow 2.5 lbs
17018 1" Jaws for PureFlow 2.5 lbs
22683 1-1/4" Jaws for PureFlow 2.5 lbs
22688 1-1/2" Jaws for PureFlow 2.5 lbs
Compact Series
Press Jaws
For ASTM F1807
PEX
Catalog No. Description Weight
22953 3/8" ASTM F1807 Jaws 2.5 lbs
22958 1/2" ASTM F1807 Jaws 2.5 lbs
22968 3/4" ASTM F1807 Jaws 2.5 lbs
22973 1" ASTM F1807 Jaws 2.5 lbs
22978 1-1/4" ASTM F1807 Jaws 2.5 lbs
23473 3/8"-3/4" ASTM F1807 Gauge 1 lbs
23478 1" ASTM F1807 Gauge 1 lbs
23898 1-1/4" JASTM F1807 Gauge 1 lbs
Standard Series
Press Jaws
For Copper &
Stainless Steel
Designed in conjunction with the fitting manufacturer to ensure
compatibility. RIDGID Standard Series pressing jaws are only com-
patible with RIDGID Standard Series Pressing Tools
Catalog No. Description Weight
76652 1/2" Jaws for Standard ProPress 2.5 lbs
76657 3/4" Jaws for Standard ProPress 2.5 lbs
76662 1" Jaws for Standard ProPress 2.5 lbs
76667 1-1/4" Jaws for Standard ProPress 2.5 lbs
Standard Series
Press Jaws
For PureFlow PEX
Catalog No. Description Weight
22653 1/2" Jaws for PureFlow 2.5 lbs
22658 5/8" Jaws for PureFlow 2.5 lbs
22663 3/4" Jaws for PureFlow 2.5 lbs
22668 1" Jaws for PureFlow 2.5 lbs
22673 1-1/4" Jaws for PureFlow 2.5 lbs
22678 1-1/2" Jaws for PureFlow 2.5 lbs
Press Snap™ Soil
Pipe Cutter
For Use With RIDGID
Standard Press Tools
Provides fast, easy way to cut
cast iron soil pipe.
• Cuts 1-1/2" to 4" No Hub & Service Weight Soil Pipe
• No lengthy lever arms
• Eliminates need to score pipe
• Completes cut in seconds
• Standard Kit includes: Press Snap Cutter, Case and OPerator's
Manual
Catalog No. Description Weight
34403 Press Snap Soil Pipe Cutter Kit 12 lbs
34678 Case Only 3.4 lbs
441
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DRAIN CLEANERS
This catalog is comprised mostly of items we
carry in stock. NEFCO adds new items to its
inventory regularly. If you need an item that is
not listed in this catalog, call us.
If we don’t have the item, it may be possible to
special order it.
K-3/K-6 Toilet Augers
High quality tools in 3’
and 6’ lengths provide fast
and safe clearing of toilet
obstructions.
Features include:
• Available in Drop Head or
Bulb Head models
• K-6 models telescope for
additional reach
• Negotiate water-
conserving toilets
• New, durable, kink-resistant, 1/2” compression-wrapped inner
core cable
• Large, ergonomically designed handles
• Vinyl guard protects porcelain.
Part Model Repl.
No. No. Description Cable
59787 K-3 3’ Toilet Auger with Bulb Head —
59792 K-3, DH 3’ Toilet Auger with Drop Head —
59797 K-66’ Toilet Auger with Bulb Head 60362
59802 K-6, DH 6’ Toilet Auger with Drop Head 60367
Model K-40 Drain Cleaners
For 3/4” to 2-1/2” Drain Lines
• Includes machine
with guide hose,
mounting bracket
and
C-13IC, 5/6” x 35”
Cable with Inner
Drum
• 1/8 HP induction
motor quietly
delivers enough
torque to clear
even the toughest
blockages
• Premium quality,
compression wound inner core cable resists kinking and
combines strength and flexibility
• Two-piece “twist lock” drum housing will not dent or corrode
and allows easy access to the inner drum and cable
• The Auto feed units make the job easier and faster - ultra light
and reliable.
Model K-39-1 Kit
For 3/4” to 2-1/2” Drain Lines
• Excellent for small line
cleaning - opens clogged
lavatory, sink lines, urinals and
tub/shower drains
- 5/16” cables best for 3/4” to
1-1/2” lines
- 3/8” cables best for 1-1/4”
to 2-1/2” lines
• Available in 3 styles: slide action chuck, powerfeed, and 3 jaw
chuck
- Chuck styles allow for quick locking/releasing of cable
- New powerfeed unit keeps hands off cable
• Lightweight, easy-to-use, no set up required
• Variable speed 1/2” ball bearing power unit rotates cable
0-500 rpm’s
• Two piece twist lock canister with interchangeable inner drum
- Makes cable change out simple; easy to match the right cable
to the job
- New inner drum prevents water leaks and greatly reduces
cable flip over
- Drums won’t rust or dent - ever
• Drum Capacity: 50’ of 5/16” or 35’ of 3/8”
• CSA Approved
Model K-60SP
For 1-1/4” to 4” Drain Lines
• Unique, easy-to-use
instant-acting cable clutch
maximizes operator control
- Push handle down, cable
spins at 600 rpm
- Release handle, cable stops
instantly, no overrun to kink
or damage cable
• Simple adjustment knob
allows unit to spin booth
7/8” and 5/8’ diameter cable
- adjusts in seconds
- 7/8” cable (C-10) cleans 2”
to 4” lines through 150 feet
- 5/8” cable (C-7, C-8, C-9)
cleans 1-1/4” to 4” lines through 125'
• Remove only two bolts to access jaw set for cleaning or
replacement - removal of same bolts provides access to belt drive
• Equipped with 1/2 HP motor
• Includes: Machine with A-1 Operator's Mit, A-12 Pin Key, and
A-60-12 Rear Guide Hose.
• CSA Approved
Part Model
No. No. Description Wt.
66492 K-60SP 115V 41
66512 K-60SP 230V 41
66497 K-60SP-SE 115V, Incl. A-60 Tool Kit, A-62 92
Cable Kit
66517 K-60SP-SE 230V, Incl. A-60 Tool Kit, A-62 92
Cable Kit
Call for Complete Specifications and Models Available
442 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PIPE WRENCHES
Straight Pipe Wrench
Sturdy, cast-iron housing and I-beam handle with full floating hook
jaw, nonstick adjustment nut and replaceable hook and heel jaws.
Part No. Model No. Size (In) Pipe Cap. (In) Weight (lbs)
31000 6 6 3/4 0.5
31005 8 8 1 0.75
31010 10 10 1-1/2 1.75
31015 12 12 2 2.75
31020 14 14 2 3.5
31025 18 18 2-1/2 5.75
31030 24 24 3 9.75
31035 36 36 5 19
31040 48 48 6 34.25
310045 60 60 8 51.25
End Pipe Wrench
Assures a fast and easy
grip for pipe working in
restricted spaces or close
to a wall. Available in
Aluminum.
Part No. Model No. Size (In) Pipe Cap. (In) Weight (lbs)
31055 E-8 8 1 0.75
31060 E-10 10 1-1/2 1.75
31065 E-12 12 2 2.75
31070 E-14 14 2 3.5
31075 E-18 18 2-1/2 5.75
31080 E-24 24 3 9.75
31085 E-36 36 5 19
RapidGrip
Wrench
The RapidGrip is
designed to provide
you with the speed
and performance you
demand. Quick one-hand
operation makes your jobs move faster. The spring-loaded jaw
design provides rapid ratcheting action.
Part No. Model No. Size (In) Pipe Cap. (In) Weight (lbs)
10348 10 10 1-1/2 1.6
10358 14 14 2 3.1
Aluminum Handle Straight Pipe Wrench
Nearly 40% lighter than comparable cast-iron models of the
same size. Jaws and all other parts identical to Ridgid Heavy-
duty Wrenches. Also available with special hook and heel jaws for
plastic coated pipe.
Part No. Model No. Size (In) Pipe Cap. (In) Weight (lbs)
31090 810 10 1-1/2 1
47057 812 12 2 2.5
31095 814 14 2 2.5
31100 818 18 2-1/2 3.75
31105 824 24 3 6
31110 836 36 5 11
31115 848 48 6 18.5
Chain Wrench
A double jaw gives fast, ratchet-like action in either direction. The
heavy-duty, model has replaceable alloy steel jaws. The light-duty
model has a one-piece forged alloy steel handle and jaw. Ideal for
use in close quarters.
Part No. Model
No.
Size
(In)
Pipe Cap.
(In)
Chain
(in)
Weight
(In)
31310 C-12 2 4 15-3/4 1.75
31315 C-14 2 5 18-1/2 2.75
31320 C-18 2-1/2 5 20-1/4 6
31325 C-24 3 5 20-1/4 8.25
31330 C-36 4-1/2 7-1/2 29 15.25
Plumber’s “T" Handle
Torque Tools
Durable “T-Handle" type tools
feature a unique locking collar
allowing the tool to be used as an
un-torqued snug-up or back-off
as well as a conventional torque
tool. With locking collar retracted,
the tool torques to the specified
torque in the right hand direction
(tightening), while ratcheting in the
left hand direction. When proper
torque value has been achieved, the
mechanism slips internally and over tightening is impossible.
Part No. Description
1-L 5" long shaft, 60 in-lb 5/16" socket
2-S 2-3/4" shaft, 60 in-lb 5/16" socket
2-SH Standard, 60 in-lb 5/16" socket
2-SM Mission Standard, 80 in-lb 5/16" socket
2-SC Clamp-all, 80 in-lb 1/4" socket
8-A Anaheim, 80 in-lb 3/8" socket
8-AH Anaheim, 80 in-lb 3/8" socket w/ hammer end caps
7-P 60 in-lb w/ 1/4" sq. dr. & dbl. ended 1/2" – 5/16" socket
443
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STANLEY RULES
FatMax® Blade Armor™ Tape
Rules
Fatmax® Tape Rules - 1-1/4"
Wide Blade Reinforced with
Blade Armor™ Coating
• Blade Armor™ coating is a
patented industrial thermoplastic coating. It’s on the first 6" of
the FatMax® Tape Rules for maximum durability and reduced
blade breakage
• 1-1/4" wide blade (25% wider) with 11’ of standout
• Easy to read graphics
• Mylar® polyester film coating extends blade life
• Top forward blade lock makes it easier to lock and unlock the blade
• Exclusive cushion grip built into the case for a comfortable
slip-resistant grip and impact resistance
• High impact, ABS case with rubber over-mold
• Specially designed, hook grabs on side, top or bottom
• Strong spring for smooth retraction
• Stainless steel wearplate protects case from being cut by blade
Blade Blade Stud
Part Length Width Case Case Markings
No. (ft) (in) Units Color/Mat'l @
33-735 35 1-1/4 English Yellow ABS 16" 19.2"
33-730 30 1-1/4 English Yellow ABS 16" 19.2"
33-726 26 1-1/4 English Yellow ABS 16" —
FatMax® Long Tapes
3/8" Wide Blade
• 3 to 1 gear drive for faster rewind
• Stainless steel blade for long life
• True zero hook with double spurs
• High impact ABS case with rubber
over-mold
• Steel roller cage to protect case from
being cut by blade during retraction
Blade Blade Stud
Part Length Width Case Case Markings
No. (ft) (in) Units Color/Mat'l @
34-129 50 3/8 English Yellow ABS — —
34-130 100 3/8 English Yellow ABS 16" —
Stanley® Steel Long Tapes - 3/8"
Wide Blade
• Sturdy lightweight molded case
designed to fit the hand comfortably
• Easy-to-read white blade with 1/8"
graduations, foot markings printed
in red
• True zero hook with double spurs
• Smooth, easy rewinding action
Blade Blade Stud
Part Length Width Case Case Markings
No. (ft) (in) Units Color/Mat'l @
34-103 50 3/8 English Yellow ABS 16" —
34-106 100 3/8 English Yellow ABS 16" —
Open Reel Fiberglass
Long Tapes 1/2" Wide Blade
• Fiberglass reinforced PVC tape for less
stretch
• Blades made with PVC, tape can be
wound wet and easily cleaned
• Two-sided printing with multiple formats
• High impact ABS case with rubber
over-mold
• High visibility yellow color makes it easy
to find on the job site
Blade Blade Stud
Part Length Width Front Back Markings
No. (ft) (in) Format Format @
34-790 100 1/2 Fractional Decimal 16" —
34-793 200 1/2 Fractional Decimal 16" —
12V Li-Ion
No-Hub Driver
With specific torque settings
for 60 and 80 in/lbs, the M12™
Cordless No-Hub Driver is
specifically designed to quickly
install no-hub couplings with
accuracy and repeatability.
• Specific Torque Settings for
60 and 80 in-lbs - Fast ac-
curate installation of no-hub
couplings
• Auto Shut-Off w/ LED Indica-
tor - Alerts users that torque
limit has been achieved
• LED Calibration Indicator - Alerts user when calibration is
needed (25,000 cycles)
• 0-750 RPM Drill Mode - for general drilling and fastening
• Fastens up to 300 steel clamps on a single charge
• Compact/Lightweight Design
• Built-in Fuel Gauge & LED for illumination.
• KIT Includes (2) Batteries, Charger, (3) Shockwave Sockets, &
Carrying Case.
2401-22 Specifications
Volts: 12 V DC
No Load Speed: 0-250 / 0-750 RPM
Torque: 60 in.-lbs. & 80 in-lbs.
Chuck Type: 1/4" Hex
Tool Weight (w/battery): 2.75 lbs.
Part No. Description
2401-22 12V Cordless Li-Ion No-Hub Driver
2401-20 Screwdriver, Bare Tool Only
2401-22
444 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CUTTING TOOLS / PRY BARS / LAYOUT TOOLS
1992® Heavy Duty Utility Blade
• Heavy duty utility blade for light sheet
materials, paper and cardboard
Part No. Packed Length Thickness
11-911 5 per card 2 .017
11-911A 100 per dispenser 2 .017
11-921 5 per card 2-7/16 .024
11-921A 100 per dispenser 2-7/16 .024
Classic 99® Retractable Utility Knife
• Interlocking nose to hold
blade
• Multi-position blade slide
• Die-cast metal handle is
durable and lightweight
• Furnished with 3 each 11-921
heavy duty blades
• Blade storage in handle
Part No. Length
10-099 6
10-788 6-1/2
10-777 7
10-209 6-1/2
Maxsteel™ Aviation Snips
Long Tapes 1/2" Wide Blade
• Exceeds ANSI standards for cutting performance and durability
• Serrated cutting edges prevent slippage when cutting
• Double overwind spring for longer life
• High leverage, compound cutting design cuts up to 18-ga. steel
• Slip-resistant bi-material palm cushion grip
• Patented hinge plate for easy product function identification
• One-handed automatic latch release with the squeeze of the handles
• Chrome plated hardware
• Ideal for cutting aluminum vinyl siding, screening, cardboard,
leather and copper
Part No. Description Overall Length
14-563 Straight 9-21/32"
14-562 Left Curve 9-21/32"
14-564 Right Curve 9-21/32"
14-566 Long Cut Straight 11-27/64"
14-567 Offset Left Curve 9-29/64"
14-568 Offset Right Curve 9-29/64"
Wonder Bar® Pry Bar
• Forged high carbon steel
• Heat treated for extra
toughness with polished
and beveled cutting
edges
• Contoured bar is ideal
for pulling nails, prying, lifting, scraping
• Beveled nail slot both ends
Part No. Blade Width (in) (mm) Overall Length (in) (mm)
55-515 1-3/4 44 12-3/8 314
14-563 14-562 14-564 14-566 14-567 14-568
Forged Hexagonal Steel Ripping Bar
• High carbon steel for extra strength
• Chisel end beveled
• Slotted claw and chisel end
Overall Length
Part No. (in) (mm)
55-124 3/4 x 23 19 x 610
55-130 3/4 x 29 19 x 760
55-136 3/4 x 35 19 x 915
55-424 23/32 x 23 18 x 610 Goose neck pattern
55-430 23/32 x 29 18 x 760 Goose neck pattern
We have Concrete anchors available!
445
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUTTING TOOLS / PRY BARS / LAYOUT TOOLS
FatMax® Brassbound Hardwood Level
• Level accuracy of 0.0010 in/in(1.0 mm/m)
• Precision milled hardwood for accuracy and long life
• Thicker glass vial covers for increased impact-
resistance with rubber gaskets to protect
vials from moisture
• Brass reinforced rubber end caps to absorb shock
• Metal hook allows easy job-site hanging (48" only)
Part No. Length No. of Vials
42-345 24" 6
42-350 48" 6
Combination Squares
• 12" square has
precision machined
working surfaces
• High visibility yellow,
die cast handle
• Durable etched, hard
chrome plated blades
• Rust-resistant for blade longevity
• Scriber for easily marking surfaces
• Easy read vial
• Brass hardware
Part No. Description Body Color Overall Length Yellow Fill
46-323 English Yellow 7" Yes
46-131 English/Metric Yellow 16" Yes
46-028 English Yellow 12" Yes
46-123 English Yellow 12" Yes
FatMax® Level
• Level accuracy of 0.0005 in/in (0.5 mm/m)
• Aluminum structure for increased durability
• Top-read center vial for easy readability
• Block vials for maximum accuracy and durability
• Highly visible accents to easily find level on work-site
• Shock absorbing end caps and overall design to maintain accuracy
• Superior magnetic holding power (Magnetic versions only)
• Hang hole for easy storage. Hand hole with soft grip for comfort
• Seamless one-piece extrusion for rugged use
• Milled working surface for improved accuracy
• Non-marring side bumpers for use against finished surfaces
Part No. Length Hand Holes No. of Vials
43-500 24" Yes 3 (1 Level/2 Plumb)
43-504 Magnetic 24" Yes 3 (1 Level/2 Plumb)
43-502 48" Yes 3 (1 Level/2 Plumb)
43-506 Magnetic 48" Yes 3 (1 Level/2 Plumb)
43-507 72" Yes 3 (1 Level/2 Plumb)
Premium Adjustable Quick Square® Layout Tool
• Rafter layout square with our exclusive
adjustable arm
• Ideal for marking repetitive cuts accurately
• Black body with yellow graduations for
maximum readability in all light conditions
• Heavy duty aluminum construction is
lightweight yet durable
• Common/Jack and Hip/Valley scales
• Can be used as a saw guide, bevel, or
protractor
Part No. Base Length Rule Length
46-053 10-3/4" 6-3/4"
Solid Hardwood Try
Square
• Durable etched stainless steel
blade
• Coated blade to resist rust
• 1/16" graduations
• Handle is solid hard wood,
lacquer coated with brass face plates
Part Blade Length Blade Handle
No. in mm Width in mm
46-209 8 203 1-1/2 5-3/8 136
Safety Protection - We’ve
got you covered!
446 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LAYOUT / FINISHING TOOLS / LASER LAYOUT TOOLS
Length
Part No. Feet Meter
47-140 100 30
FatMax® Chalk Line Reel
• 3:1 gear drive for faster rewind
• Holds up to a 4 oz bottle of
Stanley® chalk
• Chalk line has two times the
tensile strength of traditional lines
• Locking button holds string in place
• Water resistant case with
rubber grips for comfort
FatMax® Chalk Line Reel
3 Piece Layout Set
• 100 ft FatMax® chalk line reel with a 4
oz bottle of blue chalk and aluminum
line level
Length
Part No. Feet Meter
47-681 100 30
Chalk Line Reels
• Shatter resistant polypropylene case
• Easy to fill
• Free wheeling crank mechanism
Length
Part No. Feet Meter
47-200 100 30
Chalk Refills
• High grade chalk in two vivid colors
• Packed in plastic canister
Part No. Size Chalk Color
47-803 8 oz Blue
47-804 8 oz Red
47-917 2.2 lb/35 oz Blue
47-919 2.2 lb/35 oz Red
Brass Plumb Bob
• For use in framing, deck building, plumbing,
transit location and construction applications
• Screw top to easily attach string to center of plumb
• Polished lacquered solid brass construction
resists rust
• Long slender profile for easy storage
• Replaceable, hardened, steel tip for longer life
• Additional tip included on 8 oz and 16 oz sizes
• Thru hole for easy tightening
Size
Part No. oz gram
46-969 4 113
46-973 8 226
Plastic Handle Putty Knives
• Steel blade hardened, tempered
and polished
• Full tang blade permanently
fastened to shatter-resistant
nylon handle
Blade Width
Part No. Blade Type in mm
28-140 Stiff 1-1/4 32
28-240 Flexible 1-1/4 32
28-141 Stiff 1-1/2 38
28-241 Flexible 1-1/2 38
28-142 Stiff 2 51
28-242 Flexible 2 51
Horizontal & Vertical Layout
RL2+ CrossPlumb® Laser
Combines Cross Beams and Plumb Lines
• Cross line and plumb points
all in one easy-to-use laser
• Locking mechanism (pendulum
lock) increases durability and
preserves calibration.
• Locked line mode allows for
more complicated layouts;
i.e., sloped areas, tile
patterns
• Audible out-of-level alert
• Rugged rubber housing
protects precision laser
components.
• Built-in 1/4-20 thread for
tripod
SPECIFICATIONS
Recommended Use: Up to 100' indoors / 165' Outdoors
with optional detector
Accuracy: ±1/8" @ 30'
Power supply: 3 AA batteries
Cross Line: 130° horizontal & 140° vertical fan
angles
Plumb Beam: For floor-to-ceiling transfer
Manual Mode: Lock line to to match any angle
between two points
Pulse Mode For use with optional detector
Self Leveling Range: ±5°
Size: 4.5" x 2.25" x 3.875"
Operating Time: 25 Hrs. 1-beam / 12 hrs. 2-beam
Part No. Description
RL2+ Cross PLumb Laser
447
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LASER LAYOUT TOOLS
PLS180 TOOL
Horizontal-Vertical Layout
This plumb, level and square laser line tool is brighter than most rotary lasers at a fraction of
the cost. Fast, accurate and portable, the PLS180 Palm Laser saves you time and money when
your bubble vial level or rotary laser is too cumbersome or too limited for the job.
Horizontal & Vertical Layout
PLS SLD Detector
Exterior layout in your pocket. The PLS180, with our exclu-
sive PLS SLD detector, is a simple, easy solution for short
and mid-range exterior horizontal and vertical layout tasks.
PLS180 SPECIFICATIONS
Accuracy: +/- 1/8" @ 30'
Weight: 1.7 lbs.
Power supply: 3 AA batteries
Dimensions: 2" x 2-7/8" x 3-3/8"
Fan Angle 180o
Range: 100'
Self Leveling Range: 6°
Operating Time: +30 Hrs. Continuous
Class II Laser Product
The PLS180 Tool Includes:
PLS180 Laser Unit • Compact Carrying Case • PLS180 Pouch
Wall Bracket • Operating Manual • Batteries
The PLS180 System Includes:
PLS180 Laser Unit • Compact Carrying Case • PLS180 Pouch
Wall Bracket • PLS SLD Detector • Operating Manual • Batteries
DW087K Self-Leveling Line Laser
Provide Horizontal and Vertical Layout
• Accurate to +/- 1/8" @ 30' for level applications
• Built-in magnetic pivot bracket mounts easily on metal surfaces
• Overmolded housing for jobsite durability
• 1-button operation and control panel for ease of use.
SPECIFICATIONS
Accuracy: ±1/8" @ 30'
Power supply: 3 AA batteries
Range (Indoor): 50'
Self Leveling Range: 5°
Operating Time: +30 Hrs. Continuous
Class II Laser Product
Part No. Description
DW087K Self-Leveling Line Laser, incl. Kit Box
PLS3 TOOL
3-Way Point-to-Point
Alignment Information
Lay out reference points faster than
traditional labor intensive methods.
No more swinging plumb bobs.
Plumb instantly from floor to ceiling
or from 50 feet off the ground! Use
PLS as your partner on the jobsite.
Self-leveling: no time wasted on
bubble vials. Turn it on and go to
work. Take clear, stable reference
ponts indoors and outdoors.
The PLS3 System Includes:
PLS3 Laser Unit • Carrying Pouch • Floor Stand • Wall Bracket •
Operating Manual • Batteries
PLS3X SPECIFICATIONS
Accuracy: <1/4" @ 100'
Weight: 12 oz.
Power supply: 3 AA batteries
Dimensions: 1-1/2" x 4-1/2" x 3-1/8"
Range: 100' ±
Self Leveling Range: +/- 6°
Operating Time: +30 Hrs.
Class II Laser Product
Point-to-Point Alignment
Horizontal & Vertical Layout
448 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LASER LAYOUT TOOLS
Point-to-Point Alignment
PLS360 360° Rotary Laser Tool
Fully self leveling, the PLS360 provides a continuous 360 degree
line of reference. It also offers one button set up for indoor-
outdoor applications. Unlike rotary lasers with sensitive moving
parts, this compact, bright and durable tool has no complicated
features or multiple knob adjustments.
PLS SLD Detector
Exterior layout in your pocket.
PLS SLD detector, is a simple,
easy solution for short and mid-
range exterior horizontal and
vertical layout tasks.
PLS360 SPECIFICATIONS
Accuracy: 1/8" @ 100'
Weight: 2 lbs.
Power supply: 3 D batteries
Dimensions: 3-1/8" x 5" x 4-1/2"
Range: 250'
Self Leveling Range: +/- 6°
Operating Time: +35 Hrs.
Class II Laser Product
The PLS360 System Includes:
PLS360 Laser Unit • Compact Carrying Case • Wall Bracket PLS
SLD Detector • Operating Manual
360° Rotary Laser
PLS5 TOOL
5-Way Point-to-Point Alignment Information
Lay out reference points faster than traditional labor intensive
methods. No more swinging plumb bobs. Plumb instantly from
floor to ceiling or from 50 feet off the ground! Use PLS as your
partner on the jobsite. Self-leveling: no time wasted on bubble
vials. Turn it on and go to work. Take clear, stable reference ponts
indoors and outdoors.
PLS5 SPECIFICATIONS
Accuracy: <1/8" @ 100'
Weight: 1.7 lbs
Power supply: 3 AA batteries
Dimensions: 2-1/2" x 6-1/2" x 4-1/4"
Range: 100'
Self Leveling Range: +/- 8°
Operating Time: +30 Hrs. Continuous
Class II Laser Product
The PLS5 System Includes:
PLS5 Laser Unit • Compact Carrying Case • Floor Stand •
Magnetic Wall Bracket • Pendulum Layout Target • Operating
Manual • Batteries
PLS HVR 505R Mid-Range Rotary Laser Tool
A compact, mid-range rotary laser designed for light commercial,
residential and remodeling projects. Horizontal and vertical
application: the HVR 500 is versatile for short and mid-range
layout with an accuracy of 1/8" @ 100'.
PLS HVR 505R SPECIFICATIONS
Accuracy: 1/8" @ 100'
Power supply: NiMh
Dimensions: 5" x 4-3/4" x 6"
Range: 500'
Self Leveling Range: 5°
Class II Laser Product
The PLS HVR 505R System Includes:
PLS HVR 505R Laser Unit • Carrying Case • PLS RC 505 Remote
• Ceiling Bracket • PLS HVD 505 Detector • Operating Manual •
NiMh Batteries
Rotary Lasers
449
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LASER LAYOUT TOOLS
DW079KDT Self-Leveling Rotary Laser
Interior/Exterior with Detector
• Fully automatic horizontal & vertical self leveling with out-
of-level shutoff eliminates user error, ensures accuracy, and
reduces set up time
• Multi-voltage adapter accepts all DEWALT batteries 9.6V - 18V
• Protected rotary head & weatherproof design deliver interior
& exterior jobsite durability
• Bright, sharp, high power beam delivers maximum visibility,
even over long distances
• Remote control operated scan mode creates a "laser chalkline"
between two points for an extremely bright beam over long
distances
• Wireless (IR) remote control operation so that one person can
setup and aim the laser over long distances
• Digital laser detector detects rotary laser beam over long
distances or in bright light conditions.
• Includes: Self-leveling rotary laser, Digital laser detector, Wall
mount, Wireless (IR) remote control, 18V battery, 1 hour
charger, laser target card, Laser enhancement glasses, Heavy-
duty kit box (w/ padded interior) and construction tripod.
SPECIFICATIONS
Accuracy: 1/8" @ 100'
Power supply: All 9.6 - 18V DeWalt Batteries
Rotation Speed: 0, 60, 250, & 600 rpm
Range (Indoor): 200' diameter
Range w/Detector: 2000' diameter
Self Leveling Range: ±5°
Operating Time: +30 Hrs. Continuous
Weight: 6.5 lbs.
Laser Class: Class IIIa (<5mW) @ 635nm
Part No. Description
DW079KDT Self-Leveling Laser Combo Kit
Rotary Lasers
PLS HVR 1000 Long-Range Rotary Laser Tool
This proven rotary laser, made in Germany, is fully self-leveling with
an accuracy of 3/32" @ 100'. 1000 foot radius with horizontal and
vertical applications. Ideal for commercial acoustic or drywall and
general construction applications.
PLS HVR 1000 SPECIFICATIONS
Accuracy: 3/32" @ 100'
Power supply: NiMh
Dimensions: 5-1/2" x 5-1/2" x 6-3/4"
Range: 1000'
Self Leveling Range: 5°
Class III Laser Product
The PLS HVR 1000 System Includes:
PLS HVR 1000 Laser Unit • Carrying Case • RC 1000 Remote •
PLS HVD 1000 Detector • Ceiling Bracket • Operating Manual •
NiCd Batteries
450 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GENERATORS / COMPRESSORS / PRESSURE WASHERS
4400 Watt Commercial Generator with
18V Battery Start - DG4400B
Features:
• DEWALT 18 volt
battery start.
Battery and charger come
with the generator
• DEWALT 270cc (9hp) OHV engine
provides worksite reliability
• 20% more starting watts than
generators in its class
• Proper 120v and 240v outlets for
jobsite applications
• Worksite tested frame with panel pro-
tection bars for increased durability
• Super quiet muffler reduces engine noise
• Idle control saves fuel and reduces noise
• Low oil shut-off protects engine
6300 Watt Commercial Generator with
18V Battery Start - DG6300B
Features:
• DEWALT 18
volt battery
start. Battery and
charger come with
the generator
• DEWALT 389cc (13hp) OHV
engine provides worksite
reliability
• 20% more starting watts
than generators in its class
• Proper 120v and 240v outlets
for jobsite applications
• Worksite tested frame with panel
protection bars for increased durability
• Super quiet muffler reduces engine noise
• Idle control saves fuel and reduces noise
• Low oil shut-off protects engine
Heavy-Duty 1.1 HP Continuous
4 Gal Electric Wheeled Dolly-
Style Air Compressor with Panel
- D55154
Features:
• 4.0 CFM delivered at 90 PSI pump
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• 10” pneumatic wheel & handle kit
• Top load panel with positioning holes allows
unit to transport loads up to 100 lbs
• High-flow regulator for increased performance
• Dual universal quick couplers
• Ball valve drain allows for quick and thor-
ough tank draining
• Convenient cord wrap for easy storage
• Dual soft start valves
Includes:
• DEWALT compressor oil
• Control panel with (2) universal quick
couplers
Heavy-Duty 1.5 HP 8 Gallon
Electric Wheeled Portable
Compressor - D55170
Features:
• 6.5 CFM delivered @ 100 PSI enables quick
recovery
• Twin cylinder, cast iron, oil lubricated pump
with Emglo’s 50 years of proven durability
and reliability
• Low profile design for easy maneuverability
• On/Off constant run design for reduced
breaker tripping
• Fully-Pneumatic tire improves worksite
mobility
Includes:
• DEWALT Synthetic Compressor Oil
• 3/8” NPT pressure regulator
Heavy-Duty 9 HP 17 Gallon Gas
Wheeled Portable Compressor -
D55275
Features:
• 16.2 CFM delivered @ 100 PSI for high
volume usages
• Quad cylinder, cast iron, oil lubricated
pump with Emglo’s 50 years of proven
durability and reliability
• 9 HP Honda OHV GX gas engine provides
proven reliability and durability
• Dual wheels make maneuvering easier on
the worksite
• Ball valve drain allows for quick and thor-
ough tank draining
• ASME coded 17 gallon OSHA recognized tank
• Automatic idle control for reduced fuel
consumption
Includes:
• DEWALT Synthetic Compressor Oil
• 3/8” NPT pressure regulator
Heavy-Duty 3750 Max PSI, 4.0 Max
GPM Pressure Washer - DP3900
Includes:
• 5 spray nozzles
• DEWALT Heavy-Duty Professional Spray Gun
• 34” stainless steel lance
• 75’ x 3/8” Non-marking steel braided hose
• 34” Extension Lance
All items on this page
are available for rental!
Call for details
451
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SOCKET SETS
85-388
21-pc.
Socket Set
1/4" Drive -
6 Point
Contents:
Part No. Size Description
GW-1606 3/16" Socket
GW-1607 7/32" Socket
GW-1608 1/4" Socket
GW-1609 9/32" Socket
GW-1610 5/16" Socket
GW-1611 11/32" Socket
GW-1612 3/8" Socket
GW-1614 7/16" Socket
GW-1616 1/2" Socket
GW-1508 1/4" Deep Socket
GW-1509 9/32" Deep Socket
GW-1510 5/16" Deep Socket
GW-1511 11/32" Deep Socket
GW-1512 3/8" Deep Socket
GW-1514 7/16" Deep Socket
GW-1516 1/2" Deep Socket
86-004 1/4" Spinner Handle
86-011 1/4" Universal Joint
86-006 1/4" Drive Extension - 3"
86-007 1/4" Drive Extension - 6"
89-817 1/4" Pear Head Ratchet
85-404
20-pc.
Socket Set
3/8" Drive -
12 Point
Contents:
Part No. Size Description
91-132 3/8" Socket
91-138 7/16" Socket
91-151 1/2" Socket
91-186 9/16" Socket
91-283 5/8" Socket
J5222 11/16" Socket
J5224 3/4" Socket
J5226 13/16" Socket
J5228 7/8" Socket
91-286 3/8" Deep Socket
91-287 7/16" Deep Socket
91-288 1/2" Deep Socket
91-289 9/16" Deep Socket
91-296 5/8" Deep Socket
91-297 11/16" Deep Socket
91-298 3/4" Deep Socket
91-302 13/16" Deep Socket
86-206 3/8" Drive Extension - 3"
86-207 3/8" Drive Extension - 6"
89-818 3/8" Pear Head Ratchet
85-957
17-pc.
Socket Set
1/2" Drive -
6 point
Contents:
Part No. Size Description
J5414H 7/16" Socket
J5416H 1/2" Socket
J5418H 9/16" Socket
J5420H 5/8" Socket
J5422H 11/16" Socket
J5424H 3/4" Socket
88-769 13/16" Socket
88-770 7/8" Socket
88-771 15/16" Socket
88-773 1" Socket
88-774 1-1/16" Socket
88-775 1-1/8" Socket
86-458 1-3/16" Socket
88-776 1-1/4" Socket
86-415 15" Flex Handle Ratchet
86-408 3/8" Drive Extension - 10"
89-819 3/8" Pear Head Ratchet
3/8" Drive
Deep Sockets
- 12 Point
Part No.Size
91-284 5/16"
91-286 3/8"
91-287 7/16"
91-288 1/2"
91-289 9/16"
91-286 5/8"
91-297 11/16"
91-298 3/4"
91-302 13/16"
88-972 7/8"
1/2" Drive
Sockets - 12
Point
Part No. Size
J5412 3/8"
J5414 7/16"
J5416 1/2"
J5418 9/16"
J5420 5/8"
J5422 11/16"
J5424 3/4"
J5426 13/16"
J5428 7/8"
J5430 15/16"
J5432 1"
J5434 1-1/16
J5436 1-1/8"
J5440 1-1/4"
1/2" Drive
Deep Sockets
- 12 Point
Part No. Size
J5316 1/2"
J5318 9/16"
J5320 5/8"
J5322 11/16"
J5324 3/4"
J5326 13/16"
J5328 7/8"
J5330 15/16"
J5332 1"
452 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
IMPACT SOCKET SETS / RATCHETS
Not In The Catalog?
Call Us
Sourcing products is our specialty.
Be it obsolete or the
latest invention, we’ll find it for you.
85-966
19-pc. Impact Socket Set
3/4" Drive - 6 point
Contents:
Part No. Size
90-962 13/16"
J07514 7/8"
90-965 15/16"
90-918 1"
J07517 1-1/16"
90-958 1-1/8"
90-957 1-1/4"
90-966 1-5/16"
90-964 1-3/8"
90-968 1-7/16"
90-956 1-1/2"
90-970 1-9/16"
90-967 1-5/8"
90-959 1-11/16"
90-936 1-3/4"
90-960 1-13/16"
90-969 1-7/8"
90-961 1-15/16"
90-971 2"
85-969
19-pc. Impact Socket Set
1" Drive - 6 point
Contents:
Part No. Size
90-974 1-7/8"
90-973 1-15/16"
90-975 2"
90-976 2-1/16"
90-980 2-1/8"
90-984 2-3/16"
90-978 2-1/4"
90-987 2-5/16"
90-986 2-3/8"
90-989 2-7/16"
90-977 2-1/2"
90-993 2-9/16"
90-988 2-5/8"
90-981 2-11/16"
90-985 2-3/4"
90-982 2-13/16"
90-992 2-7/8"
90-983 2-15/16"
90-994 3"
85-960
13-pc. Impact Socket Set
1/2" Drive - 6 point
Contents:
Part No. Size
J7416H 1/2"
J7418H 9/16"
J7420H 5/8"
J7422H 11/16"
J7424H 3/4"
J7428H 7/8"
J7430H 15/16"
J7432H 1"
87-523G 1-16"
91-530 1-1/8"
91-548 1-3/16"
91-531 1-1/4"
89-240 Extension impact - 5"
3/4" Drive
Sockets - 12
Point
Part
No. Size
J5524 3/4"
J5526 13/16"
J5528 7/8"
J5530 15/16"
J5532 1"
J5534 1-1/16"
J5536 1-1/8"
J5538 1-3/16"
J5540 1-1/4"
J5542 1-5/16"
J5544 1-3/8"
Part
No. Size
J5546 1-7/16"
J5548 1-1/2"
J5550 1-9/16"
J5552 1-5/8"
J5554 1-11/16"
J5556 1-3/4"
J5558 1-13/16"
J5560 1-7/8"
J5564 2"
J5568 2-1/8"
J5572 2-1/4"
J5576 2-3/8"
85-990
14-pc. SAE
Combination
Wrench Set
Part
No. Size
86-833 3/8"
86-834 7/16"
86-835 1/2"
86-836 9/16"
86-837 5/8"
86-838 11/16"
86-839 3/4"
Part
No. Size
86-840 13/16"
86-841 7/8"
86-842 15/16"
86-843 1"
86-844 1-1/16"
86-845 1-1/8"
86-846 1-1/4"
Pear Head Ratchets
Part No. Drive
Pear Head Ratchets
89-817 1/4"
89-818 3/8"
89-819 1/2"
88-907 3/4"
Flex Handle Drive
34986B 3/8"
86-415 1/2"
453
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RATCHET ACCESSORIES / WRENCHES
Adjustable Spud Wrench - Clik-Stop®
• Large jaw opening fits all nuts and bolts up to 11/2 inches
• Square jaw opening provides greater strength and better fit
• Eliminates the need for carrying several fixed size wrenches
Product Weight
ID No. Max. in (lb)
712SC 1-1/2" 16 2.46
Structural Wrenches - Offset Head
• Black oxide finish
• Long offset handle provides
greater leverage and clearance
for knuckles and obstructions
• Hardened tapered handle
aligns bolt and rivet holes
• Openings are precision
broached for proper fit
Weight
Part No. in C D E F L lb
C904A 3/4 1-7/8 7/16 3/4 2-1/4 11-3/4 .72
C905 7/8 2-3/16 9/16 7/8 2-1/4 14-1/4 1.37
C906B 1 2-3/16 9/16 7/8 2-1/4 14/1/4 1.34
C907 1-1/16 2-7/16 21/32 1 2-1/4 17-1/4 2.12
C907A 1-1/8 2-7/16 21/32 1 2-1/4 17-1/4 2.22
C908 1-1/4 2-3/4 13/16 1-1/4 3 19-1/2 2.47
C908A 1-5/16 2-3/4 13/16 1-1/4 3 19-1/2 2.70
C909 1-7/16 3-1/8 13/16 1-1/4 3 19-1/2 3.66
C90A 1-1/2 3-1/8 13/16 1-1/4 3 19-1/2 2.70
C910 1-5/8 3-5/8 15/16 1-5/8 3 23-1/4 5.68
C912 2 4-7/16 15/16 1-5/8 3 23-1/4 8.32
Fed’l Specs.:GGG-W-636E
Reference Measurement Key
Adjustable Wrenches
• Satin finish
• Extra wide jaw capacity
• Square jaw opening provides greater strength
Part Max. Length Weight
No. Jaw Cap. (in) (lb)
704 1/2" 4 .12
706 15/16" 6 .25
708 1-1/8" 8 .48
710 1-5/16" 10 .80
712 1-1/2" 12 1.30
715 1-11/16" 15 3.06
718 2-1/16" 18 5.65
724 2-7/16" 24 8.60
Wrenches
Part No. Description
86-833G 3/8"
86-834G 7/16"
86-835G 1/2"
86-836G 9/16"
86-837G 5/8"
86-838G 11/16"
86-839G 3/4"
86-840G 13/16"
86-841G 7/8"
86-842G 15/16"
86-843G 1"
86-844G 1-1/16"
Combination Wrenches
Part No. Description
86-845G 1-1/8"
86-846G 1-1/4"
89-715G 1-5/16"
89-716G 1-3/8"
89-717G 1-7/16"
89-718G 1-1/2"
89-719G 1-5/8"
89-720G 1-3/4"
89-711G 1-13/16"
89-712G 1-7/8"
89-713G 2"
Drive Extensions
Part No. Drive Length
GW-9898 1/4" 3"
GW-9899 1/4" 6"
34988 3/8" 3"
34987 3/8" 6"
34984 3/8" 11"
49966 1/2" 5"
49990 1/2" 10"
69993 3/4" 4"
69995 3/4" 8"
Universal Joints
86-211 86-411
Part No. Drive
86-211 3/8"
86-411 1/2"
Adapters
86-214 86-414
Part No. Drive Description
86-211 3/8" Female x 1/4"
Male Adapter
86-411 1/2" Female x 3/8"
Male Adapter
454 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WRENCHES
Big Dawg™ Foot Pound
Torque Wrenches - Ratchet Head
• 45 Tooth gear/floating pawl design for small 6.8° arc swing
• 13% smaller head for access in tight work areas
• Reversing lever designed for quick, one hand operation
• 10-80 ft/lb thru 140-700 ft/lb
• 21-116 Nm thru 217-976 Nm
• Calibrated ± 3% of torque reading clockwise and ± 6%
counterclockwise at 20% to 100% full scale
• Certified wrenches to ± 2% one direction available upon
request
Part Torque Range Graduations Drive Wt. Storage
No. ft/lb Nm ft/lb Nm Size Length lb. Box
6006F 10-80 21-116 .5 .68 3/8 16-7/16" 2.00 6003PB
6012F 20-100 34-142 .5 .68 3/8 16-7/16" 2.40 6003PB
6008F 10-80 21-116 .5 .68 1/2 16-7/16" 2.00 6003PB
6016F‡ 30-150 47-210 1 1.36 1/2 20-3/4" 3.97 6004PB
6014F 50-250 75-345 1 1.36 1/2 26-1/4" 4.68 6005PB
6018AB 60-300 102-428 2 1.7 3/4 32-11/16" 9.70 6007PB
6020AB 90-600 142-834 2 1.7 3/4 41-1/2" 11.60 6007PB
6022B† 140-700 217-976 2 1.7 1 48" 14.50 6007PB
† Secondary Scale on Newton Meters
‡ Meets Ergonomic Criteria
ANSI Spec.: B107.14M
ISO6789
Weight
Part No. in C D E L lb
2617SW 1-1/16 1-11/16 5/8 15/16 8-1/2 1.79
2618SW 1-1/8 1-11/16 5/8 15/16 8-1/2 1.75
2620SW 1-1/4 1-7/8 13/16 13/16 10-3/4 2.95
2621SW 1-5/16 1-7/8 13/16 13/16 10-3/4 2.89
2623SW 1-7/16 2-3/16 1 1-1/2 12 4.53
2624SW 1-1/2 2-3/16 1 1-1/2 12 4.53
2626SW 1-5/8 2-13/32 1-1/8 1-1/2 12-1/4 4.58
2627SW 1-11/16 2-13/32 1-1/8 1-1/2 12-1/4 4.44
2628SW 1-3/4 2-19/32 1-3/16 1-9/16 13-7/16 6.58
2629SW 1-13/16 2-21/32 1-3/16 1-9/16 13-7/16 6.51
2630SW 1-7/8 2-27/32 1-1/4 1-21/32 13-7/16 6.58
2632SW 2 2-27/32 1-1/4 1-21/32 13-7/16 6.60
2634SW 2-1/8 3-1/8 1-1/2 2 13-7/8 8.62
2635SW 2-3/16 3-3/8 1-1/2 2 13-1/2 8.38
2636SW 2-1/4 3-3/8 1-1/2 2 13-1/2 8.38
2637SW 2-5/16 3-3/8 1-1/2 2 13-1/2 8.06
2638SW 2-3/8 3-3/8 1-1/2 2 13-1/2 8.08
2640SW 2-1/2 4 1-1/2 2-1/4 13-1/2 9.52
2641SW 2-9/16 4 1-1/2 2-1/4 13-1/2 9.52
2642SW 2-5/8 4 1-1/2 2-1/4 13-1/2 9.63
2644SW 2-3/4 4 1-1/2 2-1/4 13-1/2 9.04
2647SW 2-15/16 4-7/16 1-7/8 2-5/8 16 12.64
2648SW 3 4-7/16 1-7/8 2-5/8 16 13.13
2650SW 3-1/8 4-7/16 1-7/8 2-5/8 16 12.72
Fed’l specs.:GGG-W-636E
Offset Striking Wrenches Heavy-Duty-12 pt.
• Black oxide finish
• Large striking surface for
surer blow contact and
more efficient transmittal of
force to fastener
• Short handle permits use in
close quarters
• Box opening designed to
remain on fastener when
wrench is struck
• For use where extreme force
is necessary to loosen or set
large fasteners
• Heavy box walls provide
greater torque transmission
• Offset handle clears obstruction
Reference Measurement Key
12 Piece
Standard Drive Set
• Weight: 1.50 lb
Part No. Contents Description
1412NB GW-1606 6 Pt. Std. Socket 1/4" Drive 3/16"
GW-1607 6 Pt. Std. Socket 1/4" Drive 7/32"
GW-1608 6 Pt. Std. Socket 1/4" Drive 1/4"
GW-1609 6 Pt. Std. Socket 1/4" Drive 9/32"
GW-1610 6 Pt. Std. Socket 1/4" Drive 5/16"
GW-1611 6 Pt. Std. Socket 1/4" Drive 11/32"
GW-1612 6 Pt. Std. Socket 1/4" Drive 3/8"
GW-1614 6 Pt. Std. Socket 1/4" Drive 7/16"
GW-1616 6 Pt. Std. Socket 1/4" Drive 1/2"
GW-9898 1/4" Drive 3" Extension
GW-9550 1/4" Drive Spinner
GW-9945B 1/4" Drive Round Head Knurled Ratchet
7-PC High Access Ratcheting
Wrench Set
• Weight: 3.00 lb
Part No. Contents Size
BW-1250 BW-1210 3/8"
BW1212 7/16"
BW-1214 1/2"
BW-1216 9/16"
BW-1218 5/8"
BW-1220 11/16"
BW-1222 3/4"
455
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WRENCHES / SCREWDRIVERS
20-Piece Standard Drive Set
•3/8" Drive; 12 Point Sockets
•Weight: 5.50 lb
Part No. Contents Description
3820-S 30412 3/8" Deep Socket
30414 7/16" Deep Socket
30416 11/2" Deep Socket
30418 9/16" Deep Socket
30420 5/8" Deep Socket
30422 11/16" Deep Socket
30424 3/4" Deep Socket
30426 13/16" Deep Socket
30014 7/16" Standard Socket
30016 1/2" Standard Socket
30018 9/16" Standard Socket
30020 5/8" Standard Socket
30022 11/16" Standard Socket
30024 3/4" Standard Socket
30026 13/16" Standard Socket
30012 3/8" Standard Socket
30028 7/8" Standard Socket
31945B Round Head, Knurled, Reversible Ratchet
34988 3" Extension
34987 6" Extension
14-Piece Full Pol-
ish Combination
Wrench Set
• Weight: 9.90 lb
Item No. Contents Size
BW-14PT BW-1159FP 5/16"
BW-1160FP 3/8"
BW-1161FP 7/16"
BW-1162FP 1/2"
BW-1163FP 9/16"
BW-1164FP 5/8"
BW-1165FP 11/16"
BW-1166FP 3/4"
BW-1167AFP 13/16"
BW-1167FP 7/8"
BW-1168FP 15/16"
BW-1170FP 1"
BW-1172FP 1-1/8"
BW-1173FP 1-1/4"
Pouch
7-Piece Combination Screw-
driver Set
• Weight: 2.16 lb
Blade
Part No. Contents Description Tip Length Blade Shank
ST-1072 ST-1004S Slotted 1/4 4 - •
ST-1006S Slotted 5/16 6 - •
ST-1008S Slotted 3/8 8 - •
ST-1145S Slotted Stubby 1/4 1-1/2 - •
ST-1081S Phillips® 1 Pt. 3 + •
ST-1082S Phillips® 2 Pt. 4 + •
ST-1140S Phillips® Stubby 2 Pt. 1-1/2 + •
Pouch
26-Piece Standard Drive
Set
•1/2" Drive; 6 and 12 Point
Sockets
•Weight: 14 lb.
Part No. Contents Description
1226-S 40614 7/16", 6 Pt. Std. Socket
40616 1/2", 6 Pt. Std. Socket
40618 9/16", 6 Pt. Std. Socket
40620 5/8", 6 Pt. Std. Socket
40622 11/16", 6 Pt. Std. Socket
40624 3/4", 6 Pt. Std. Socket
40126 13/16", 12 Pt. Std. Socket
40128 7/8", 12 Pt. Std. Socket
40130 15/16", 12 Pt. Std. Socket
40132 1", 12 Pt. Std. Socket
40134 1-1/16", 12 Pt. Std. Socket
40136 1-1/8", 12 Pt. Std. Socket
40140 1-1/4", 12 Pt. Std. Socket
40316 1/2", 12 Pt. Deep Socket
40318 9/16", 12 Pt. Deep Socket
40320 5/8", 12 Pt. Deep Socket
40322 11/16", 12 Pt. Deep Socket
40324 3/4", 12 Pt. Deep Socket
40326 13/16", 12 Pt. Deep Socket
40328 7/8", 12 Pt. Deep Socket
40330 15/16", 12 Pt. Deep Socket
40332 1", 12 Pt. Deep Socket
49966 5" Extension
49964 2" Extension
49988B 1/2" Drive Flex Handle
49945B 1/2" Drive, Round Head, Knurled, Reversible Ratchet
456 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VISE-GRIP TOOLS
Vise-Grip®
Locking Welding Clamp
This clamp holds parts in proper
alignment - even when material is
not identical in thickness. Positive
lock leaves hands free. Special
deep-throated U-shaped jaws provide perfect visibility and
working space.
Part No. Length Jaw Width Throat Depth
9R 9 2-3/4 1-5/8
Vise-Grip®
Locking Chain Clamp
Holds and locks around any
size or shape - anything the
chain can be wrapped around.
Adjusts to ratchet action
in either direction. Won’t slip, won’t crush thin-walled pipe.
Replacement chain and extension chain available.
Part No. Description
20R Locking Chain Clamp
20 Ext 18” Extension Chain
20 Rep 18” Replacement Chain
Vise-Grip®
Sheet Metal Tool
For bending, forming and
crimping sheet metal. Locks
to your work with a powerful
non-slip grip. Micro-adjusting screw and easy release trigger are
standard features.
Part No. Length Jaw Width Throat Depth
8R 8 3-1/8 1-3/4
Vise-Grip®
Long Nose with
Wire Cutter Plier
The tapered nose is
ideal for delicate work,
hobbies, tight spaces, electronics and holding of small parts.
Pliers features the same wire-cutting power as the curved-jaw
model. The easy-release trigger snaps jaws open instantly for the
next application. A quick adjust speed screw makes fine tuning
easier and quicker. Available in 6” and 9” lengths.
Part No. Length Jaw Thick Jaw Adjust.
6LN 6 5/32 Tip 0-2-1/4
9LN 9 3/16 Tip 0-2-7/8
Vise-Grip®
Locking Curved Jaws/
Wire Cutter Plier
Wire cutter will handle anything
up to a 1/4” bolt. One bite will
cut smaller wires and progressive bites cut through the big wires.
The tool is heat-treated for maximum toughness and durability. A
simple hand squeeze can put one ton of pressure between jaws
assuring you of a hold tight, won’t slip grip. A quick-adjust speed
screw lets you fine tune your adjustment with only one hand.
Available in 7” and 10” lengths. Ten and seven inch length also
available without wire cutter (Models 7CR & 10CR).
Part No. Length Jaw Thick Jaw Adjust.
7WR 7 5/16 0-1-5/8
10WR 10 7/16 0-1-7/8
7CR 7 5/16 0-1-5/8
10CR 10 7/16 0-1-7/8
Vise-Grip®
Locking Straight Jaws
Plier
Made of finest grade alloy steel
with heavy-duty jaws that grip work of all shapes. The tool locks
to the work leaving both hands free. Powerful jaws and teeth
hold on tight and won’t slip. Change adjustments quickly with the
specially designed speed screw. Available 7” and 10” length.
Part No. Length Jaw Thick Jaw Adjust.
7R 7 1/2 0-1-1/8
10R 10 5/8 0-1-5/8
Vise-Grip®
Locking C-Clamp
Micro adjustment for
quick pre-adjusting
and repeat clamping.
Jaws open wide for versatility. A powerful locking mechanism
guarantees no slippage. Locking C-Clamps are engineered for
balance and ease of handling. Locks work with one hand squeeze
and have an easy-release trigger. Indispensable tool for welding
sheet metal or woodworking. Your choice of regular (R) or swivel
pad (SP) tips.
Part No. Length Jaw Adj. Throat Height Throat Depth
4R 4 1-5/8 1-7/8 1-1/4
5R 6 2-1/8 2-1/4 1-1/6
11R 11 4 3-3/4 2-5/8
18R 18 8 4-1/2 9-1/2
24R 24 10 4-1/2 15-1/2
6SP 6 2-1/8 2-1/4 1-1/2
11SP 11 4 3-3/4 2-5/8
18SP 18 8 4-1/2 9-1/2
24SP 24 12-1/2 4-1/2 15-1/2
457
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PLIERS / TOOL BAGS / BELTS
Canvas Tool Bags
Durable white canvas
bags, bottom and 3"
of lower sides are
covered with one-piece
Naugahyde, cemented
and lock-stitched. Bottom is protected
with steel studs. Mouth has steel frame.
Handles are harness leather. All bags have
two retaining straps and buckles. For
shoulder strap kit see P/N 5102S.
Part No. Length Depth Width
5102-16 16" 14" 6"
5102-20 20" 15" 6"
X-Large Nylon Equipment Bag
Orange, vinyl-
coated nylon fabric
bag. Naugahyde-
reinforced bottom
extends 3" up the
sides. Bottom
protected by metal
studs. Nylon-web handles extend around
bag for extra support. Wide opening steel
frame is securely riveted in top of bag.
Extra flap for storm protection.
Part No. Length Width Depth
5180 24" 10" 18"
Canvas Zipper Bag
White-canvas, zippered
bag. Convenient storage
for pliers, wrenches and
other tools.
Part No. Size
5139 7-1/2" x 12"
Canvas Electrode Bag
Tough canvas with heat-
resistant hard-leather bottom.
Height in front is 12"; height in
black is 15-1/2".
Part No. Description
5417 Electrode Bag
Tool Bags
Tool Belts
Adjustable Web Tool Belt
This strong
economical belt
of polypropylene
webbing has a
sliding adjuster
that allows a
quick fit through the entire range of waist
sizes up to 48". Provides easy adjustment
for changes in sizes required by heavy
winter clothing. Clasp buckle holds belt
firmly but permits easy release.
Part No. Size Belt Width
5225 32" - 48" 2-1/4"
Lightweight Utility Belt
This strong
lightweight
synthetic-
web quickly
adjusts for
waist sizes
through 52". The 2" wide belt will accept
tunnel-loop and slotted pouches and
holders. The tough, molded, non-metallic,
slide-action buckle provides single-
handed, quick release and adjustment.
Part No. Size
5204 Up to 52"
Bull-Pin & Bolt Bags
Bolt bag with bull-pin loop
on each side. Canvas with
double bottom, 3" belt
loops or tunnel loop.
Part No. Description
5416 Canvas, 5" x 9" x 10" D
Tongue & Groove Pliers
Right angle teeth grip in all directions. Undercut Tongue and
Groove, won’t slip. PermaLock Fastener eliminates nut and
bolt failure. Reinforcing edge that minimizes stress breakage.
Channellock Blue comfort grips
Length Adjustments Capacity
Model Jaw (in.) (in.) (in.)
480 20-1/4 12 5-1/2 Big Azz
460 16 8 4-1/4
442 12 7 2-1/4 Curved
440 12 7 2-1/4
430 10 7 2
422 9-1/2 5 1-1/2 Curved
420/421 9-1/2 5 1-1/2
415 10 7 2 Smooth
426 6-1/2 5 7/8
424 4-1/2 3 1/2
Leather-Bottom
Bucket
This Klein bucket is more
widely used by public
utilities than any other.
Made of #1 canvas with
Cycolac top ring. Bottom
is covered with leather
reinforcement extending
3" up the sides. Inside
pocket measures 8" x 8".
Polypropylene rope handle
is reinforced with leather where it is
spliced around top ring.
Part No. Size
5104 12" Dia x 17" H
Broad-Head Bull Pins
A drop-forged, heat-treated bull pin which
increases efficiency by providing a larger
striking surface.
Part No. Top Bottom Height
3255 1-1/4" 5/16" 13"
3256 1-1/16" 1/4" 10"
458 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TOOL POUCHES / ELECTRIC BENDERS
Tool Pouches
Leather Pocket Tool Pouch
Perfect for carrying pliers and other tools in the
hip pocket. Prevents wear and tearing of clothes,
discomfort and possible injury.
Part No. Overall Size
5111 5" x 7"
5-Pocket Tool Pouch
General-purpose pouches have an extra-large
utility pocket for assorted tools and other
items, a smaller utility pocket, three small
pockets, and a tape thong. Loops fit belts up to
2-1/4" wide. P/N 5125 is made of heavy canvas
with a heavy Ultra-Hyde™ back for user comfort
and stability. P/N 5125L is made of leather and
Ultra-Hyde™.
Part No. Description Nominal Size
5125 Canvas pouch with Ultra-Hyde™ back 7-1/2” x 8-1/2”
7-Pocket Multi-Purpose Tool Pouch
A multi-purpose pouch, soft and pliable.
Moisture resistant to retain flexibility even after
being wet and dried. Has two large, gusseted
utility pockets, two screwdriver pockets,
hammer loop, three pliers pockets and one
chain tape thong.
Part No. Description
5166 Leather pouch, 7" x 10" tunnel loop fits belts up
to 2-1/4" wide
10-Pocket Big-Capacity Tool Pouch
Rugged, big-capacity pouch with 10 separate
pockets. Four large, gusseted utility pockets.
Two pliers pockets. Four pockets for
screwdrivers. Knife snap. Slotted pouch fits
belts up to 2" wide. Riveted and stitched.
Made of leather.
Part No. Nominal Overall Size
5165 10” x 10”
Quad Bender™ 853
Electric bender brings you
the portability of the famous
Greenlee “triple nickel” plus
the exclusive, no-change-out
Quad-shoe technology. Han-
dles 1” through 2” EMT, IMC,
Ridgid and Ridgid aluminum.
555 Bender®
A landmark for design. Still a
great choice for contractors
doing extensive bending in any
single-type conduit. There’s a
shoe available for bending all
conduit types in sizes up to 2”.
Quad 854 Bender™
No-change-out Quad-shoe de-
sign plus the high-productivity
features, capacity and flex-
ibility of the 855 without digital
controls.
Smart Quad Bender® 855
Intelligent pendant controls:
Standard (included), digital
readout and programmable
bend angles for accurate re-
peat bends. Deluxe (optional),
interactive control - calculates
complete layout measurements
for various types of bends.
Quad-shoe design blends 1/2”
to 2” EMT, IMC, Rigid and
Rigid aluminum conduit without
any shoe changes - no loose
parts to get lost.
Choose the Model that’s Best for You
855 854 853 555
Quad-Shoe and Patented Roller System • • •
Pivoting Bending Head • •
Squeeze Adjustment • • • •
Digital Controls •
Programmable Controls •
1”, 1-1/4”, 1-1/2”, 2” Capacity • • Optional
1/2”, 3/4” Capacity* • • • Optional
* EMT, IMC, Ridgid Steel and Aluminum
459
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Abrasives
Quick Reference
Cutting
Cut-Off Wheels / Chop Saw 466
Cut-Off Wheels / Gas Saw 467
Cut-Off Wheels / Accessories 465
Cutting Wheels . . . . . . 463 - 464
.045 Cutting Wheels . . . . . . 464
Diamond Blades . . . . . 468 - 469
Grinding
Carbide Burs . . . . . . . . . . . 484
Cup Grinding Wheels . . . . . 466
Cup Wheels . . . . . . . . . . . . 469
Grinding Wheels . . . . . 462 - 464
Grinding Wheels - Bench. . . 486
Surface Conditioning
Abrasive Belts . . . . . . 476 - 477
Backing Pads / Accessories
. . . . . . . . . . . . . . . . . 477, 481
Cartridge Rolls . . . . . . 483 - 484
Convolute Wheels / Unitized
Wheels................ 482
Fiber Discs . . . . . . . . . . . . . 480
Flap Discs . . . . . . . . . 468 - 467
Flap Wheels . . . . . . . . 470 - 471
Interleaf Flap Wheels . . . . . 473
Internal (Tube) Brushes
Nylon / Wire Brushes 485 - 488
Sait-Lok™/ Sait-Lok-R™ 476 - 479
Sanding Sheets. . . . . . . . . . 475
Shop Rolls / Hand Pads . . . 474
Surface Conditioning Belts 477
Surface Conditioning Discs 478
Wire / End Brushes. . . 488 - 487
Wire Wheels / Brushes 487 - 489
Wire Scratch Brushes . . . . . 486
Visit Our Website!
• Specials
• Quotes
• Submittals
• On-Line Catalog
• On-Line Library
www.GoNefco.com
460 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
GRINDING WHEELS
A24N
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
Secondary application: Low
Grade Stainless Steel
• Aluminum oxide grain
• Soft bond for stock removal
A24R
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
• Aluminum oxide grain
• Our most popular wheel
• For general purpose
grinding
• Longer life for fewer wheel
changes
C24N
Primary application: Masonry,
Concrete, Stone
Secondary application: Cast
Iron and other Ferrous metals
• Silicon carbide grain
• Soft bond for fast stock
removal
A46N Aluminum
(Non-Ferrous Metals)
Primary application:
Non-Ferrous Metals
(Aluminum, Copper, Brass etc.)
• Aluminum oxide grain
• Soft bond for aggressive
removal of material without
loading
• Outlasts competition by as
much as 40%
Z24R
Primary application: Ferrous
Metals (Iron, Steel, Welds, etc.)
Secondary application:
Stainless Steel, High Tensile
Alloys
• Tough zirconium grain
• High performance grinding
for the toughest jobs
Note:
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
Saitech Ultimate
Performance™
Primary application: Stainless
Steel and other High Tensile
Alloys
Secondary application:
Ferrous Metals (Iron, Steel,
Welds, etc.)
• High performance, ceramic
aluminum oxide grain.
• Very uniform, high density
grain structure is extremely
durable and self sharpening
for long life and cooler cut
Type 27 Depressed Center Grinding Wheels
Dimensions (Inches) Part Numbers
A Dia. B Width C Bore Max RPM A24N A24R A46N Z24R C24N Saitech UP
4 1/4 3/8 13,500 SAI20012 — — — — —
4 1/4 5/8 13,500 SAI20015 SAI20013 SAI20018 SAI22599 SAI20017 —
4-1/2 1/4 7/8 13,300 SAI20060 SAI20063 SAI20062 SAI22600 SAI20061 SAI20064
4-1/2 1/4 5/8-11 13,300 SAI20160 SAI20163 SAI20162 SAI22610 SAI20161 —
5 1/4 7/8 12,200 SAI20070 SAI20073 SAI20072 SAI22602 SAI20071 —
5 1/4 5/8-11 12,200 SAI20170 SAI20173 SAI20172 SAI22612 SAI20171 —
6 1/4 7/8 10,200 — — — SAI22603 — —
6 1/4 5/8-11 10,200 — — — SA122613 — —
7 1/4 7/8 8,500 SAI20081 SAI20080 SAI20083 SAI22604 SAI20082 —
7 1/4 5/8-11 8,500 SAI20085 SAI20086 SAI20088 SAI22614 SAI20087 —
9 1/4 7/8 6,600 SAI20091 SAI20090 SAI20093 SAI22606 SAI20092 —
9 1/4 5/8-11 6,600 SAI20095 SAI20096 SAI20098 SAI22616 SAI20097 —
461
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUTTING / GRINDING WHEELS
Pipeline
Primary application: Ferrous Metals
(Iron, Steel, Welds, etc.)
• Aluminum oxide grain
• For the pipeline industry
• Designed/manufactured to
perform both cutting & light
grinding
• Long life
Sait Z-Tech Pipeline
Primary application: Ferrous Metals (Iron, Steel, Welds, etc.)
Secondary application: Stainless Steel, High Tensile Alloys
• Tough zirconium grain
• High performance cutting/light grinding for the toughest
applications
Dimensions (Inches) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM Pipeline Pipeline
Z-Tech
4 1/8 5/8 13,500 SAI22015 SAI22619
4-1/2 1/8 7/8 13,300 SAI22030 SAI22620
4-1/2 1/8 5/8-11 13,300 SAI22130 SAI22630
5 1/8 7/8 12,200 SAI22040 SAI22622
5 1/8 5/8-11 12,200 SAI22140 SAI22632
6 1/8 7/8 10,200 SAI22042 SAI22623
6 1/8 5/8-11 10,200 SAI22046 SAI22633
7 1/8 7/8 8,500 SAI22055 SAI22624
7 1/8 5/8-11 8,500 SAI22052 SAI22634
9 1/8 7/8 6,600 SAI22065 SAI22626
9 1/8 5/8-11 6,600 SAI22062 SAI22636
A24R
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
• Aluminum oxide grain
• For general purpose, low cost cutting only
• Combines fast cutting and long life
Dimensions (Inches) Part No.
A Dia. B Width C Bore Max RPM A24R
3 1/8 3/8 18,000 SAI22000
4 1/8 3/8 13,500 SAI22010
4-1/2 3/32 7/8 13,300 SAI22020
4-1/2 3/32 5/8-11 13,300 SAI22120
5 3/32 7/8 12,200 SAI22070
5 3/32 5/8-11 12,200 SAI22170
6 1/8 7/8 10,200 SAI22045
7 3/32 7/8 8,500 SAI22056
7 3/32 5/8-11 8,500 SAI22057
9 3/32 7/8 6,600 SAI22066
9 3/32 5/8-11 6,600 SAI22067
Z24R
Primary application: Ferrous metals
(Iron, Steel, Welds, etc.)
Secondary application: Stainless Steel,
High Tensile Alloys
• Tough zirconium grain
• High performance cutting/notching for
the toughest applications
Dimensions (Inches) Part No.
A Dia. B Width C Bore Max RPM Z24R
4 3/32 5/8 13,500 SAI22640
4-1/2 3/32 7/8 13,300 SAI22641
4-1/2 3/32 5/8-11 13,300 SAI22651
5 3/32 7/8 12,200 SAI22643
5 3/32 5/8-11 12,200 SAI22653
6 3/32 7/8 10,200 SAI22644
6 3/32 5/8-11 10,200 SAI22654
7 3/32 7/8 8,500 SAI22645
7 3/32 5/8-11 8,500 SAI22655
9 3/32 7/8 6,600 SAI22646
9 3/32 5/8-11 6,600 SAI22656
Saitech Ultimate Performance™
Primary application: Stainless Steel, High
Tensile Alloys
Secondary application: Ferrous metals (Iron,
Steel, Welds, etc.)
• High performance, ceramic aluminum
oxide grain
• Very uniform, high density grain structure is extremely durable
• and self sharpening for long life and cooler cut
Dimensions (Inches) Part No.
A Dia. B Width C Bore Max RPM Saitech UP
9 3/32 5/8-11 6,600 SAI22099
Type 27 Specialty Cutting and Light Grinding Wheels
Note:
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
462 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CUTTING / GRINDING WHEELS
A46N Aluminum
(Non-Ferrous Metals)
.045
Primary application: Non-
Ferrous Metals (Aluminum,
Copper, Brass etc.)
• Aluminum oxide grain
• Thin .045 width
• Soft bond for aggressive
cutting without loading
A60S .045
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Welds, Aluminum, Copper, Brass etc.)
• So unique that it has a patent pending
• Thin .045 width
• Special aluminum oxide grain
• Hard bond for extremely long life
• Fast, burr free cutting
Dimensions (Inch) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM A46N A60S Saitech Z-Tech
4 .045 5/8 13,500 SAI22340 SAI22011 SAI22068 SAI23333
4-1/2 .045 7/8 13,300 SAI22345 SAI22021 SAI22072 SAI23334
5 .045 7/8 12,200 SAI22350 SAI22071 SAI22073 SAI23335
6 .045 7/8 10,200 SAI22360 SAI22047 SAI22082 SAI23336
7 .045 7/8 8,500 SAI22370 SAI22053 SAI22088 SAI23337
A24R
Primary application: Ferrous Metals
(Iron, Steel, Welds, etc.)
• Aluminum oxide grain
• Medium bond for longer life and
fewer wheel changes
Saitech Ultimate Performance™
Primary application: Stainless
Steel
Secondary application: Ferrous
Metals (Iron, steel, welds, etc.)s
• Combines maximum material
removal with long life
• Exclusive formula with patented
3M Cubitron grain
C24N
Primary application: Masonry, Concrete, Stone, Brick
• Silicon carbide grain
• Soft bond for fast stock removal
Dimensions (Inch) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM A24R C24N Saitech
7 1/4 7/8 8,500 SAI21000 SAI21002 SAI21084
7 1/4 5/8-11 8,500 SAI21005 SAI21006 SAI21089
9 1/4 7/8 6,600 SAI21010 SAI21012 SAI21094
9 1/4 5/8-11 6,600 SAI21015 SAI21016 SAI21099
Type 27 Depressed Center .045 Cutting Wheels
Z-Tech .045 - High Performance
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Welds, Aluminum, Copper, Brass etc.)
• So unique that it has a patent
• Thin .045 width
• Special zirconium grain
• Hard bond for extremely long life
• Fast, burr free cutting
Saitech Ultimate Performance™
Primary application: Stainless Steel and other High Tensile Alloys
Secondary application: Ferrous Metals (Iron, Steel, Welds, etc.)
• So unique that it has a patent pending
• Thin .045 width
• Fast cutting with long life
• Wheel can be mounted to right angle grinders with standard
Type 27 flanges
Type 28 Depressed Center Grinding Wheels
Note:
All wheels with the 5/8"-11 bore
come with the Superlock™ Hub.
463
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CUT-OFF WHEELS / ACCESSORIES
Size Part No.
1/4 x 1/4 95002
1/4 x 3/8 95003
1/4 x 1/2 95004
Description Part No.
5/8-11 Reusable Adaptor 95055
Adapters
Type 1 Thin High Speed Cut-Off Wheels
A24R
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
• Aluminum oxide grain
• General purpose, long life
A36T
Primary application: Ferrous and/or Non-
Ferrous Metals (Iron, Steel, Welds, Aluminum,
Copper, Brass etc.)
Secondary application: Stainless Steel
• Aluminum oxide grain
• Hard bond for aggressive cutting on rough
applications
A60T
Primary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
Secondary application: high tensile metals
• Very fine aluminum oxide grain
• Hard bond for smooth cutting
• For use in nuclear, aerospace, automotive,
foundry industries, and plant maintenance
• Now available with 3/8" arbor
Saitech Ultimate Performance™
Primary application: Stainless Steel, High
Tensile Alloys
Secondary application: Ferrous and/or
Non-Ferrous Metals
• Combines fast cutting with extremely long life
Dimensions (Inch) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM A25R A36T A60T Saitech UP
3 1/16 1/4 25,000 — SAI23042 SAI23043 SAI23142
3 1/16 3/8 25,000 — SAI23040 SAI23041 SAI23140
3 .035 1/4 25,000 — SAI23052 SAI23053 SAI23152
3 .035 3/8 25,000 — SAI23050 SAI23051 SAI23150
3 1/8 3/8 20,372 SAI23060 — — —
4 1/16 1/4 19,000 — SAI23067 SAI23068 SAI23167
4 1/16 3/8 19,000 — SAI23065 SAI23066 SAI23165
4 1/16 5/8 19,000 — SAI23061 SAI23062 SAI23161
4 .035 1/4 19,000 — SAI23071 SAI23072 SAI23171
4 .035 3/8 19,000 — SAI23069 SAI23070 SAI23169
4 .035 5/8 19,000 — SAI23063 SAI23064 SAI23163
4 1/8 3/8 15,278 SAI23075 — — —
6 .035 5/8 10,168 — SAI23204 SAI23205 —
7 .035 1-1/4 8,732 — SAI23252 SAI23253 —
8 1/16 1-1/4 7,640 — SAI23277 SAI23278 —
Type 1 Cut-Off Adapters
• For use with Type 1 Thin high Speed Wheels only
Type 1 and Type 27 Reusable 5/8-11 Adapter
• Reusable 5/8-11 adaptor for use on Type 1 and Type 27 reinforced wheels with a 7/8
arbor, a max. diameter of 5” and a wheel thickness of .045 to 1/8”
464 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CHOP SAW / CUT-OFF WHEELS
Stud King®
Primary application:
Metal Studding, Thin
Rebar, Light Gauge
Metals
• Aluminum oxide
grain
• General purpose
cool cutting on thin
metals
• Burr free finish
Iron Worker®
Primary application: Structural Metal
• Aluminum oxide grain
• Fast cutting
• Excellent for use on angle iron, heavy re-bar, and other
ferrous metals
Non-Ferrous Metals (Aluminum)®
Primary application: Non-Ferrous Metals (Aluminum, Bronze,
Brass)
• Aluminum oxide grain
• Special non-loading formulation
Saitech Steel Worker™
Primary application: Stainless Steel and other
High Tensile Alloys
Secondary application: Ferrous Metals (Iron,
Steel, Welds, etc.)
• New and improved for the 14 inch wheel
• Formulated with 3M Cubitron Grain
• Extremely fast burr free cutting
Sait EZ-Chop™
Primary application: Metal Studding, Thin Rebar, Light Gauge
Metals, Angle Iron
• Aluminum oxide grain
• General purpose cool cutting on thin metals
• Burr free finish
• Use this wheel as an economical alternative for general
purpose cutting
Dimensions (Inches) Part No.
A Dia. B Width C Bore Max RPM A24R
12 3/32 1 5,100 SAI24034
14 3/32 1 4,400 SAI24039
Type 1 Chop Saw Wheels
Dimensions (Inch) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM
Iron Stud
King Worker
Saitech
Steel
Worker
Aluminum
10 3/32 5/8 6100 SAI24035 — — —
12 3/32 1 5100 SAI24030 SAI24031 — —
12 3/32 1 5100 — — SAI24033 —
14 3/32 1 4400 SAI24050 SAI24051 — —
14 3/32 1 4400 — — SAI24053 —
14 3/32 1 4400 — — — SAI24052
16 3/32 1 3700 SAI24010 SAI24011 — —
16 3/32 1 3700 — — SAI24013 —
A24N - Fast Cutting on Stationary Saw
Primary application: Ferrous metals (iron, cast iron, etc.)
• Aluminum oxide grain
• General purpose
• Soft bond for fast stock removal
Sait EZ-Chop Attacker®
Primary application: Metal Studding, Thin Rebar, Light Gauge
and Medium Metals
• Aluminum oxide grain
• General purpose economy cutting
• Fast cutting on thin metals
Dimensions (Inches) Part No.
A Dia. B Width C Bore Max RPM A24R
14 3/32 1 4,400 SAI24500
465
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
GAS SAW - CUT-OFF WHEELS
A24R
Primary application: Ferrous Metals (Steel,
Angle Iron, Rebar)
• Provides consistent performance with
long life
Brute®
Primary application: Thin Metal, Sheet
Metal, Decking, and other Ferrous
Materials.
• Long life
• Extremely hard bond for cutting materials that
present a very sharp edge to the wheel
Hobo®
Primary application: Mainline, Secondary, Spur Rail
Steel
• For use on high horsepower machines
• Rugged fiberglass construction for maximum
safety
• Excellent for the railroad industry
• Also for use on heavy sections of ferrous metals (I-Beams, bar
stock)
Dimensions (Inches) Part Numbers
A Dia. B Width C Bore Max RPM A24R Brute Hobo Ductile M.A.C.
6-1/2 3/32 5/8 10500 SAI23222 ————
7 3/32 5/8 8500 SAI23234 ————
8 3/32 5/8 7600 SAI23258 ————
12 1/8 1 6300 SAI23410 SAI23412 —SAI2341 SAI23460
12 1/8 7/8 6300 SAI23400 ————
12 1/8 20 mm 6300 SAI23420 SAI23422 —SAI23425 *SAI23462
14 1/8 1 5400 SAI23450 SAI23452 SAI23501 SAI23453 *SAI23463
14 1/8 20 mm 5400 SAI23455 SAI23457 —SAI23458 *SAI23464
* With Pin Hole
A46N Aluminum (Non-Ferrous Metals) .045
Primary application: Non-Ferrous Metals (Aluminum,
Copper, Brass, etc.)
• Aluminum oxide grain
• Soft bond for aggressive cutting without loading
• Use with reusable 5/8-11 adapter to fit right-angle grinders
A60S
Primary application: Ferrous and/or Non-Ferrous Metals
(Iron, Steel, Welds, Aluminum, Bronze, Brass etc.)
• Thin .045 width
• Use with reusable 5/8-11 adapter to fit right-angle grinders
• Extremely fast cutting with long life
Saitech™ .045
Primary application: Stainless Steel, High Tensile Alloys
Secondary application: Ferrous Metals (Iron, Steel, Welds
etc.)
• Thin .045 width
• Use with reusable 5/8-11 adapter to fit right-angle grinders
• Combines fast cutting with extremely long life
Type 1 High Speed Cut-Off Wheels for Portable Saws
Ductile
Primary application: Ductile
Pipe - (very hard steel casing
enclosing a cement lining, water
mains, etc.)
Secondary application:
Combination Metal (Concrete,
Cast Iron, Hard Metals,
Concrete, Coated Steel, etc.)
• Combination aluminum oxide and silicon carbide formulation
Big M.A.C. (Masonry-Asphalt-Concrete)
Primary application: Masonry, Asphalt, Concrete
• Special silicon carbide grain
• Superior cutting action
• 40% longer life than general purpose concrete wheels
Dimensions (Inch) Part Numbers
A
Dia.
B
Width
C
Bore
Max
RPM A46N A60S Saitech
4 .045 5/8 13500 SAI23304 SAI23172
4 .045 5/8 13500 SAI23099
4-1/2 .045 7/8 13300 SAI23314 SAI23174
4-1/2 .045 7/8 13300 SAI23101
5 .045 7/8 12200 SAI23315 SAI23177
5 .045 7/8 12200 SAI23103
6 .045 7/8 10200 SAI23316 SAI23182
6 .045 7/8 10200 SAI23106
7 .045 5/8 8500 SAI23317 SAI23184
7 .045 5/8 8500 SAI23107
466 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
DIAMOND BLADES
Utility Green Segmented Cup Grinders
Part No. Specification Size / Desc.
94177 S5G 4" x 5/8-11" Single Row
94175 D5G 4" x 5/8-11" Double Row
94178 S5G 7" x 5/8-11" Single Row
94176 D5G 7" x 5/8-11" Double Row
NOTE: All cup grinders come with 5/8-11 threaded hub. Available with 7/8" arbor
upon request.
D5G Double Row for long
life grinding and a smooth
finish.
• Great Cutting Value
• Faster cut than segmented blades
due to the serrated segment design,
allowing less surface-to-surface
contact
• General Purpose, Harder Materials,
Some Rebar
• Universal 1" and 20 mm Arbor
• Specification: T7B
• Best value for tuck point cutting
• For cleaning mortar joints
• Specification: DTG4000
• Available in a bonded 3-stack
blade for faster cutting
3-in-1Utility Green
Also Available in a
2-in-1 version!
S5G Single Row for general
grinding and material removal.
Star Blue
Star Blue Turbo Blades
Part Number Size
74959 4” x .080 x 7/8”
74960 4-1/2” x .080 x 7/8”
74961 7” x .095 x 7/8”
5-Pack Star Blue Turbo Blades
76589 4” x .080 x 7/8”
76590 4-1/2” x .080 x 7/8”
76591 7” x .095 x 7/8”
Utility Green
Part Number Size
94186 4" x .250 x 7/8"
94187 4-1/2" x .250 x 7/8"
3-N-1 Utility Green Tuck Point Blades
94183 4” x .080 x 7/8”
94184 4-1/2” x .080 x 7/8”
5 Pack Utility Green Tuck Point Blades
94206 4” x .250 x 7/8”
94207 4-1/2” x .250 x 7/8”
Part Number Size
74950 4” x .070 x 7/8”
74951 4-1/2” x .070 x 7/8”
74952 7” x .080 x 7/8”
10-Pack Star Blue Small Diameter Blades
42196 4” x .070 x 7/8”
42201 4-1/2” x .070 x 7/8”
Utility Green Tuck Point Blades
Star Blue Small Diameter Blades for
Electric Saws & Right Angle Grinders
Star Blue
• Specification: E2B
• Long Life
• For cutting hard materials
(concrete)
467
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DIAMOND BLADES / CUP WHEELS
• For use with Type 1 Cut-off Wheels
• Reduces wheel arbor size
• Skin packaged in quantities of 10 per package
Part No. Size
95030 1-5/8"
95034 7/8"-5/8"
95031 1-20 mm
95035 5/8" Dia
95032 1-7/8"
95036 1/2" Dia.
95033 1-3/4"
95037 1/2"- 3/8"
A16
Primary application: Ferrous Metals
• Aluminum oxide grain
• Coarse grit wheel for tough grinding
applications
• Excellent for cleaning castings, mold
marks, removing flashing
Standard Gold
Standard Gold High Speed Blades
• Very Good Quality
• Dry or Wet Cutting
• Diamond Depth of .255"; Segment
Height .350"
• G4000 - Long Life For Cutting
Concrete, Hard Material
• H7S - Hard Materials
• H8S - Concrete with some rebar
• H10S Green Concrete, asphalt,
brick and block
Size
H7S
Part No.
H8S
Part No.
H10S
Part No.
12" x .110 x UNV 57706 57707 57708
14" x .125 x UNV 57719 57720 57721
16" x .125 x UNV 91674 92873 91767
18" x .125 x 1" 28303 16868 14395
20" x .125 x 1" 28270 28271 13846
Type 1 Cut-Off Wheel Reducing Bushings
Type 11 Cup Wheels
C16
Primary application: Masonry, Concrete
and Stone
• Silicon carbide grain
• Coarse grit for tough grinding
applications
• Excellent for cleaning castings, mold
marks, remove flashing
CA16
Primary application: Combination of
Ferrous Metals and/or Concrete
• Combination of aluminum oxide and
silicon carbide grain
• Coarse grit for tough grinding
applications
• Excellent for cleaning castings, mold
marks, remove flashing
Dimensions (Inches) Part Numbers
A Dia. B Width C Bore Max RPM A16 A16MB* C16 C16MB* CA16 CA16MB*
4(3) 2 5/8-11 9050 SAI26000 SAI26003 SAI26001 SAI26004 SAI26002 SAI26005
5(4) 2 5/8-11 7250 SAI26010 SAI26013 SAI26011 SAI26014 SAI26012 SAI26015
6(4-3/4) 2 5/8-11 6050 SAI26020 SAI26023 SAI26021 SAI26024 SAI26022 SAI26025
*MB = Metal Backing for secure holding
468 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FLAP DISCS
• Offers combinations of grinding/blending through the use of thick layers of industrial
quality abrasive cloth bound to a backing
• Fast, cool grinding without clogging or loading
• Excellent for a wide range of applications
• Combines the work of a depressed center grinding wheel and fiber discs to eliminate
the need for two separate operations
• Available in several materials and backings to suit the needs of specific applications
• Resin over resin bond construction for a strong bond resistant to heat and moisture
2A Material
Primary application: Ferrous and/or Non-Ferrous metals (Iron, Steel, Aluminum, Brass,
Copper etc.)
• Premium aluminum oxide grain
• General purpose, long life
• Closed coat structure for more material removal
• Aluminum oxide grain
Fiberglass Backing
• Allows for lighter, quieter operation
• Will not splinter or smear on the work piece
• Backing wears with the abrasives cloth
Saitlam UK (Conical Shape)
• Available in Z (Zirconium) grain
• Conical shape ideal for working with large surfaces or complex shapes
• Working angle is “built-in”
• For general purpose stock removal and finishing
Saitlam F - Flap Discs
Part
No. Grit Diameter Arbor
76440 40
4-1/2" 5/8-11
76450 50
76460 60
76480 80
76420 120
Part
No. Grit Diameter Arbor
76540 40
5" 5/8-11
76550 50
76560 60
76580 80
76520 120
Part
No. Grit Diameter Arbor
76740 40
7" 5/8-11
76750 50
76760 60
76780 80
76720 120
Saitlam UK - Flap Discs
Part
No. Grit Diameter Arbor
73685 40
4-1/2" 7/8"
73686 50
73687 60
73688 80
73689 120
Part
No. Grit Diameter Arbor
73694 40
5" 7/8"
73695 50
73696 60
73697 80
73698 120
469
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FLAP DISCS
Primary application: Ferrous and Non-Ferrous metals
Secondary application: Stainless Steel, High Tensile Steel, Titanium, Aluminum
• High Density design for softer, cushioned grinding, blending and finishing
• More abrasive material than standard low density flap discs for very long life
• Premium zirconium material for aggressive cutting and long life
• More grinding material = increased productivity
• Available in 4-1/2”, 5” and soon 7” with and without 5/8-11 hub
Ovation® Flap Discs
Part
No. Grit Diameter Arbor
78005 36
4-1/2" 7/8"
78006 40
78008 60
78009 80
78011 120
78105 36
4-1/2" 5/8-11
78106 40
78108 60
78109 80
78111 120
Part
No. Grit Diameter Arbor
78025 36
5" 7/8"
78026 40
78028 60
78029 80
78031 120
78125 36
5" 5/8-11
78126 40
78128 60
78129 80
78131 120
Part
No. Grit Diameter Arbor
78045 36
7" 7/8"
78046 40
78048 60
78049 80
78051 120
78145 36
7" 5/8-11
78146 40
78148 60
78149 80
78151 120
Polifan® - Curve Flap Discs
Precise, Aggressive Grinding of Fillet Welds
Ultimate tool for grinding fillet welds
• Available in 2 thicknesses for smaller and larger fillet welds.
• Premium Zirconia material used in the disc will provide excellent service
life
• Tough and aggressive - removes scale and bead from
• all metals: steel, stainless and alloys.
• Works faster than grinding wheels without the risk of undercutting the
work piece.
• Smooth finish allows easy visual inspection for defects, such as
porosity and inclusions.
Part No.
Unthreaded
Arbor
Threaded
Arbor Diameter Disc
Thickness
Fillet Weld
Width Grit Bore Max RPM
67192 67212 4-1/2" 9/16" Medium 3/16" 40 7/8" 13,300
67339 67359 4-1/2" 5/8" Large 5/16" 40 7/8" 16,300
470 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FLAP WHEELS
Primary application: Ferrous and/or Non-Ferrous Metals (Iron,
Steel, Aluminum, Copper, etc.)
Secondary application: Wood, Plastic, Fiberglass, etc.
•General purpose
• Premium aluminum oxide grain
• Excellent for cleaning, de-burring, polishing, blending
Available in straight or threaded shank
2A Flap Wheels — Now in 40 Grit!
Part No.
Diameter
(Inch)
Width
(Inch) Grit 1/4"
Straight
1/4"-20
Threaded
1
3./4
60 SAI70001 SAI71000
80 SAI70002 SAI71001
120 SAI70003 SAI71002
180 SAI70004 SAI71003
240 SAI70005 SAI71004
1
60 SAI70010 SAI71010
80 SAI70011 SAI71011
120 SAI70012 SAI71012
180 SAI70013 SAI71013
240 SAI70014 SAI71014
1-1/2
1/2
60 SAI70025 SAI71020
80 SAI70026 SAI71021
120 SAI70027 SAI71022
180 SAI70028 SAI71023
240 SAI70029 SAI71024
1
60 SAI70040 SAI71030
80 SAI70041 SAI71031
120 SAI70042 SAI71032
180 SAI70043 SAI71033
240 SAI70044 SAI71034
2 1
60 SAI70050 SAI71040
80 SAI70051 SAI71041
120 SAI70052 SAI71042
180 SAI70053 SAI71043
240 SAI70054 SAI71044
Part No.
Diameter
(Inch)
Width
(Inch) Grit 1/4"
Straight
1/4"-20
Threaded
2-1/2
1/2
60 SAI70060 SAI71050
80 SAI70061 SAI71051
120 SAI70062 SAI71052
180 SAI70063 SAI71053
240 SAI70064 SAI71054
1
60 SAI70070 SAI71055
80 SAI70071 SAI71056
120 SAI70072 SAI71057
180 SAI70073 SAI71058
240 SAI70074 SAI71059
3
1/2
60 SAI70080 SAI71060
80 SAI70081 SAI71061
120 SAI70082 SAI71062
180 SAI70083 SAI71063
240 SAI70084 SAI71064
3/4
60 SAI70090 SAI71070
80 SAI70091 SAI71071
120 SAI70092 SAI71072
180 SAI70093 SAI71073
240 SAI70094 SAI71074
1
60 SAI70100 SAI71080
80 SAI70101 SAI71081
120 SAI70102 SAI71082
180 SAI70103 SAI71083
240 SAI70104 SAI71084
471
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INTERLEAF FLAP WHEELS
Interleaf Flap Wheels are constructed with alternating flaps of surface conditioning
material and coated abrasive material for a high cut rate and a uniform scratch pattern -
provides blending action while leaving final finish on work piece.
Smear-resistant non-woven material for clean, smear-proof work surfaces.
Interleaf design makes product more aggressive than SAIT non-woven flap brushes and
less aggressive than SAIT coated abrasive flap wheels.
Medium Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Also for: Fiberglass
• Medium surface conditioning material with either 60 or 80
grit coated abrasive material
• Excellent for removing heavy oxidation, blending, cleaning and
deburring
Very Fine Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Also for: Fiberglass
• Very fine surface conditioning material with either 120 or 180
grit coated abrasive material
• Excellent for grain finishing, satin finishing and linear scratch
patterns
Non-woven synthetic fiber impregnated with abrasive grain for
surface conditioning without damage to or removal of base material.
• Popular width to fit most power sanders
• Waterproof material for use with a variety of lubricants
• Roll form-cut to size for customized fit for individual application
needs
Medium Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Also for: Fiberglass
• Excellent starting point for de-burring and blending
• Available in 4" and 6" widths - 30’ rolls
Very Fine Grade
Primary application: Aluminum and Stainless Steel
Secondary application: Ferrous and Non-Ferrous Materials
Also for: Fiberglass
• Very conformable and durable
• Excellent for light blending and finishing
• Available in 4" and 6" widths - 30' rolls
Interleaf Flap Wheels
Sand-Light™ Non-Woven Rolls
Size
(Inches) Grit Grade Max RPM Part
No.
Box
Qty
2 x 1 x 14
60 Medium 11,000 77710 10
80 Medium 11,000 77712 10
120 Very Fine 11,000 77714 10
180 Very Fine 11,000 77716 10
3 x 1 x 14
60 Medium 8,000 77730 10
80 Medium 8,000 77732 10
120 Very Fine 8,000 77734 10
180 Very Fine 8,000 77736 10
3 x 2 x 1/4
60 Medium 8,000 77750 10
80 Medium 8,000 77752 10
120 Very Fine 8,000 77754 10
80 Very Fine 8,000 77756 10
Part No. - Grade A/O Grain
Medium Very Fine Size Box Qty
77610 77630 4" x 30' 1
77614 77634 6" x 30' 1
472 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SHOP ROLLS / HAND PADS
Handy Rolls
Primary application:
Ferrous and/or Non-
Ferrous Materials (Iron,
Aluminum, Copper,
Normal and High Tensile
Steel)
Secondary application:
Wood, Fiberglass, etc.
Packaging 50 yd. length,
1 per box
• Aluminum oxide grade
• Medium tensile strength
• Primarily for hand applications
• High quality DA-F material for high flexibility
Sand-Light™ Abrasive Hand Pads
Brown
Primary application: Ferrous and/or
Non-Ferrous metals
• Heavy duty
• Excellent for removing heavy rust
and cleaning welds
Maroon
Primary application: Ferrous
and/or Non-Ferrous metals
• General purpose
• For removing light rust
• Excellent for cleaning and brightening
Black
Primary application: Stainless Steel
Secondary application: Ferrous and/or Non-Ferrous metals
• For blending and finishing
• Excellent for paint removal
Green
Primary application: Ferrous and/or Non-Ferrous metals
Secondary application: Paint, Varnish
• General cleaning
• Excellent for stripping paint and varnish
Gray
Primary application: Non-Ferrous metals
Secondary application: Wood
• Ultra fine
• For light finishing
• Excellent for sanding before/between finish coats
White
Primary application: Fiberglass, Vinyl, Plastic, Formica
Secondary application: Ceramic
• Light duty
• For light cleaning and polishing
Saitscreen™ Rolls
Primary application: Ferrous
and/or Non-Ferrous Materials
(Iron, Aluminum, Copper, Normal
and High Tensile Steel)
• Silicon carbide grain
• Long life
• Waterproof
• Non-loading screen cloth
• Also for use on wood, paint, etc.
• Secondary applications: ceramic
• Individually packaged rolls
Size Grit Part No.
1-1/2" x 10 yd
80 84090
120 84093
180 84096
NEFCO now has 4 Distribution Centers
to serve you. All locations are full
service and are capable of making sure
you get the materials you need, where
you need them, when you need them.
A big word about our service -
DEPENDABLE
Width Grit Part No.
1"
40 80405
50 80505
60 80605
80 80805
100 81005
120 81205
150 81505
180 81805
220 82205
240 82405
320 83205
400 83405
1-1/2"
40 80406
50 80506
60 80606
80 80806
100 81006
120 81206
Width Grit Part No.
1-1/2"
150 81506
180 81806
220 82206
240 82406
320 83206
400 83406
2"
40 80420
50 80520
60 80620
80 80820
100 81020
120 81220
150 81520
180 81820
220 82220
240 82420
320 83220
400 83420
COMPARE TO 3M
SCOTCH-BRITE™ PADS!
Size Grade Color Part No. Qty X-Ref
6" x 9"
Heavy Duty Brown 77440 20 3M-7440
Gen. Purpose Maroon 77447 20 3M-7447
Stainless Black 77446 20 3M-7446
Stripper Green 77496 20 3M-96
Ultra Fine Gray 77448 20 3M-7448
Light Duty White 77486 20 3M-7445
473
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SANDING SHEETS
Saitscreen
• Strong cloth screen
impregnated with silicon
carbide grain
• Open coat structure prevents
loading
• Use wet or dry
• Extremely long lasting
• Double sided and die
cutWood - Plaster, dry wall
joints
Paper
• Silicon carbide grain
• Paper backing
• Open coat structure prevents loading
• Use dry
• Provides a smooth finish
• Easy-to-handle rolls for on-the-job "cut to size" use
• Wood - Plaster, dry wall joints
DA-F
• Aluminum oxide grain
• Open coat structure prevents
loading
• Water resistant
• Long life combined with
excellent stock removal
• Excellent for woodworking
applications
• Wood - Wood, plaster,
fiberglass
• Metal - Ferrous and/or Non-
Ferrous materials (Iron, Steel,
Copper, etc.)
• Available in F - weight - high flexibility
Aluminum Oxide (AW-C & AW-D)
• Extremely long lasting, Use wet or dry
• Open coat structure prevents loading
• Wood - Wood, sealers, fillers
• Metal - Ferrous or Non-Ferrous
• Available in grits up to 1200 for
ultra fine finishing
• Available in weights:
"C" - medium weight, medium
flexibility
"D" - heavy weight, low flexibility
Size Grit Part No. Qty
Sheets
Saitscreen
4-3/16" x 11"
Diecut
80 84070 50
100 84071 50
120 84072 50
220 84075 50
80D 84066 100
Paper
3-5/16" x 11"
100C 84067 100
120C 84068 100
150C 84069 100
Paper
4-3/16" x 11"
Diecut
80D 84051 100
100C 84050 100
120C 84052 100
150C 84053 100
180A 84054 100
220A 84055 100
Rolls
Paper
3-5/16" x 50 yd
80D 84056 1
100C 84057 1
120C 84058 1
150C 84059 1
Size Grit Part No. Qty
36 84907 25
40 84908 25
50 84909 25
60 84910 25
80 84911 25
9 x 11 DA-F 100 84912 50
120 84913 50
150 84914 50
180 84915 50
220 84916 50
240 84917 50
320 84918 50
180A 84054 100
220A 84055 100
Size Grit Part No. Qty
9 x 11 AW-D
40D 84211 100
50D 84212 100
60D 84213 100
80D 84214 100
100D 84215 100
120D 84216 100
9 X 11 AW-C
150C 84200 100
180C 84201 100
220C 84202 100
240C 84203 100
320C 84204 100
400C 84205 100
500C 84206 100
600C 84207 100
800C 84208 100
1200C 84209 100
474 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ABRASIVE BELTS
Aluminum Oxide Closed Coat Abrasive Belts
Resin over resin construction for a strong bond resistant to heat and moisture bidirectional
tape splice for a stronger belt that can be used in either direction.
1A-X/2A-X Material
Primary application: Ferrous and/or Non-Ferrous Metals
Secondary application: Wood, Fiberglass, Plastic, etc.
• Aluminum oxide grain
••Use dry only
• X-weight backing-average weight and flexibility
• Closed coat structure for more material removal and better finishing
Size (Inch) Grit Part
No.
1/4 x 18 36 60016
1/4 x 18 40 60017
1/4 x 18 50 60018
1/4 x 18 60 60019
1/4 x 18 80 60020
1/4 x 18 100 60021
1/4 x 18 120 60022
1/4 x 24 36 60030
1/4 x 24 40 60031
1/4 x 24 50 60032
1/4 x 24 60 60033
1/4 x 24 80 60034
1/4 x 24 100 60035
1/4 x 24 120 60036
3/8 x 13 36 61121
3/8 x 13 40 61122
3/8 x 13 50 61123
3/8 x 13 60 61124
3/8 x 13 80 61125
3/8 x 13 100 61126
3/8 x 13 120 61127
1/2 x 12 36 60044
1/2 x 12 40 60045
1/2 x 12 50 60046
1/2 x 12 60 60047
1/2 x 12 80 60048
1/2 x 12 100 60049
1/2 x 12 120 60050
1/2 x 18 36 60058
1/2 x 18 40 60059
1/2 x 18 50 60060
1/2 x 18 60 60061
1/2 x 18 80 60062
Size (Inch) Grit Part
No.
1/2 x 18 100 60063
1/2 x 18 120 60064
1/2 x 24 36 60086
1/2 x 24 40 60087
1/2 x 24 50 60088
1/2 x 24 60 60089
1/2 x 24 80 60090
1/2 x 24 100 60091
1/2 x 24 120 60092
3/4 x 18 36 60114
3/4 x 18 40 60115
3/4 x 18 50 60116
3/4 x 18 60 60117
3/4 x 18 80 60118
3/4 x 18 100 60119
3/4 x 18 120 60120
3/4 x 20-1/2 36 60128
3/4 x 20-1/2 40 60129
3/4 x 20-1/2 50 60130
3/4 x 20-1/2 60 60131
3/4 x 20-1/2 80 60132
3/4 x 20-1/2 100 60133
3/4 x 20-1/2 120 60134
1 x 12 36 60141
1 x 12 40 60142
1 x 12 50 60143
1 x 12 60 60144
1 x 12 80 60145
1 x 12 100 60146
1 x 12 120 60147
1 x 21 36 60254
1 x 21 40 60255
1 x 21 50 60256
Size (Inch) Grit Part
No.
1 x 21 60 60257
1 x 21 80 60258
1 x 21 100 60259
1 x 21 120 60260
1 x 30 36 61094
1 x 30 40 61095
1 x 30 50 61096
1 x 30 60 61097
1 x 30 80 61098
1 x 30 100 61099
1 x 30 120 61100
1 x 42 36 60310
1 x 42 40 60311
1 x 42 50 60312
1 x 42 60 60313
1 x 42 80 60314
1 x 42 100 60315
1 x 42 120 60316
1 x 42 150 60316
1 x 42 180 60317
1 x 42 220 60318
1 x 42 240 60320
1 x 42 320 60322
1-1/2 x 60 36 61133
1-1/2 x 60 40 61134
1-1/2 x 60 50 61135
1-1/2 x 60 60 61135
1-1/2 x 60 80 61137
1-1/2 x 60 100 61138
1-1/2 x 60 120 61139
3 x 21 36 60604
3 x 21 40 60605
3 x 21 50 60606
Size (Inch) Grit Part
No.
3 x 21 60 60607
3 x 21 80 60608
3 x 21 100 60609
3 x 21 120 60610
3 x 24 36 60646
3 x 24 40 60647
3 x 24 50 60648
3 x 24 60 60649
3 x 24 80 60650
3 x 24 100 60651
3 x 24 120 60652
4 x 21 36 57601
4 x 21 40 57602
4 x 21 50 57603
4 x 21 60 57604
4 x 21 80 57605
4 x 21 100 57606
4 x 21 120 57607
4 x 24 36 60842
4 x 24 40 60843
4 x 24 50 60844
4 x 24 60 60845
4 x 24 80 60846
4 x 24 100 60847
4 x 24 120 60848
6 x 48 24 61023
6 x 48 36 61024
6 x 48 40 61025
6 x 48 50 61026
6 x 48 60 61027
6 x 48 80 61028
6 x 48 100 61029
6 x 48 120 61030
475
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ABRASIVE BELTS
Surface Conditioning Belts
Non-woven synthetic fiber impregnated with abrasive grain for surface conditioning
without damage to or removal of base material - resists loading and heat build-up.
Offered in very narrow widths - excellent for use on tight radii and hard to reach applications.
Flexible yet extra durable splice method - resists breaking or cracking under severe stress.
Size
(Inch)
Coarse
Brown
Medium
Maroon
Very Fine
Blue
Pkg.
Qty.
1/2 x 18 77510 77511 77512 10
1/2 x 24 77515 77516 77517 10
3/4 x 18 77520 77521 77522 10
3/4 x 20-1/2 77575 77576 77577 10
3-1/2 x 15-1/2 77500 77501 77502 10
1 x 42 77525 77526 - 10
2 x 48 77530 77531 - 10
2 x 60 77535 77536 - 10
2 x 132 77550 77551 - 5
3 x 21 77570 77571 77572 10
3 x 24 77560 77561 77562 10
3 x 132 77555 77556 - 5
4 x 24 77565 77566 77567 10
6 x 48 77540 77541 - 5
Redhead Adhesive
Anchoring System
See pages 74-79.
Galvanizing
Compounds and
Primers
See page 543.
Brown - Coarse
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials
Also for: Fiberglass and Rubber
• Coarse
• Excellent for deburring, blending
• For use on mill marks, tool marks, to
create a
smooth transition on surface profiles
Maroon - Medium
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials
Also for: Fiberglass and Rubber
• General purpose
• Excellent for blending and cleaning
• Reduce uneven edges on adjoining
surfaces
• Remove coatings, gaskets, and surface
discolorations
Blue - Very Fine
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials
Also for: Fiberglass and Rubber
• Very fine
• Excellent for cleaning and finishing
• Reduce surface roughness
• Polish welds
• Use to apply cosmetic grain or scratch
patterns
476 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SURFACE CONDITIONING DISCS
Sait-Lok™ and Sait-Lok-R™ Surface Conditioning Discs
Sait-Lok™
All metal attachment on disc ensures a secure
fit to the backing pad
Sait-Lok-R™
Nylon screw threaded hub for easy mounting
to the backing pad
Size
(Inch)
Part Numbers
Grade Color Sait-Lok™Sait-Lok-R™Pkg. Qty.
1-1/2
Coarse Brown 77200 77300 50
Medium Maroon 77202 77302 50
Very Fine Blue 77203 77303 50
2
Coarse Brown 77206 77306 50
Medium Maroon 77208 77308 50
Very Fine Blue 77209 77309 50
3
Coarse Brown 77212 77312 25
Medium Maroon 77214 77314 25
Very Fine Blue 77215 77315 25
Hook and loop fastening system allows for
quick changes and less downtime.
Non-woven synthetic fiber impregnated
with abrasive grain for surface conditioning
without damage to or removal of base
material.
Brown - Coarse
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass, Gaskets.
• Heavy duty
• Excellent for de-burring, blending,
cleaning and polishing
Maroon - Medium
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass, Gaskets.
• General purpose
• Excellent for de-burring, blending,
cleaning and polishing
Blue - Very Fine
Primary application: Stainless Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass, Gaskets.
• Very fine
• Excellent for cleaning and finishing
Sand-Light™ Surface Conditioning Discs
Size Grade Color Part No.
4
Coarse Brown 77116
Medium Maroon 77117
Very Fine Blue 77115
4-1/2
Coarse Brown 77118
Medium Maroon 77120
Very Fine Blue 77122
5
Coarse Brown 77124
Medium Maroon 77126
Very Fine Blue 77128
Size Grade Color Part No.
6
Coarse Brown 77130
Medium Maroon 77132
Very Fine Blue 77134
7
Coarse Brown 77136
Medium Maroon 77138
Very Fine Blue 77140
8
Coarse Brown 77142
Medium Maroon 77144
Very Fine Blue 77146
Brown - Coarse
Primary application: Stainless Steel, High
Tensile Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass
• Heavy duty
• Excellent for removing surface coatings
and contaminants, including rust
Maroon - Medium
Primary application: Stainless Steel, High
Tensile Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass
• General purpose
• Excellent for removing surface coatings
and light rust
Blue - Very Fine
Primary application: Stainless Steel, High
Tensile Steel
Secondary application: Ferrous and/or
Non-Ferrous Materials.
Also for: Fiberglass
• Very fine
• Excellent for blending and finishing
477
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SAIT-LOK™ / SAIT-LOK-R™
Sait-Lok™ and Sait-Lok-R™ Specialty Laminated Discs
Sait-Lok™
All metal attachment on disc
ensures a secure fit to the
backing pad
Sait-Lok-R™
Nylon screw threaded hub for
easy mounting to the backing
pad
Sait-Lok™ / Sait-Lok-R™ Backing Pads
Size Part No.
1" Medium 95165
1-1/2" Medium 95166
2" Medium 95167
3" Medium 95168
3A
Primary application: Stainless Steel, High Tensile Steel, Titanium
Secondary application: Ferrous and/or Non-Ferrous Materials.
• Premium aluminum oxide grain
• Fast stock removal
• Cooling agents for cool cutting and long life
• Easy disc changes by twisting to unlock
backing pad
Z
Primary application: Stainless Steel, High Tensile Steel
Secondary application: Ferrous and/or Non-Ferrous Materials.
• Premium zirconium grain
• Very fast stock removal, long life
• Easy disc changes by twisting to unlock
backing pad
Size
(Inch)
Sait—Lok™Sait—Lok—R™
Pkg.
Qty.
Grit 3A Z 3A Z
1
36 50208 — — — 100
40 50209 — — — 100
50 50210 — — — 100
60 50211 — — — 100
80 50212 — — — 100
100 50213 — — — 100
120 50214 — — — 100
1-1/2
36 50215 55215 50264 55264 100
40 50216 55216 50265 55265 100
50 50217 55217 50266 55266 100
60 50218 55218 50267 55267 100
80 50219 55219 50268 55268 100
100 50220 — 50269 — 100
120 50221 — 50270 — 100
Size
(Inch)
Sait—Lok™Sait—Lok—R™
Pkg.
Qty.
Grit 3A Z 3A Z
2
36 50222 55222 50271 55271 100
40 50223 55223 50272 55272 100
50 50224 55224 50273 55273 100
60 50225 55225 50274 55274 100
80 50226 55226 50275 55275 100
100 50227 — 50276 — 100
120 50228 — 50277 — 100
3
36 50229 55229 50278 55278 50
40 50230 55230 50279 55279 50
50 50231 55231 50280 55280 50
60 50232 55232 50281 55281 50
80 50233 55233 50282 55282 50
100 50234 — 50283 — 50
120 50235 — 50284 — 50
Sait-Lok™ Backing Pads for
Laminated and Surface Conditioning Discs
• 1/4" shank
• For use with Sait-Lok™
laminated (shown above) and
surface conditioning discs
• Disc twists into metal
threaded center of backing
pad for fast and easy disc
changes
Sait-Lok-R™ Backing Pads for
Laminated and Surface Conditioning Discs
• For use with Sait-Lok-R™
laminated (shown above) and
surface conditioning discs
• 1/4" shank
• Nylon threaded hub of disc
twists into backing pad for
secure fit
• Minimizes change-over
downtime
Size Part No.
1-1/2" Hard 95266
2" Hard 95267
3" Hard 95268
Size Part No.
1-1/2" Medium 95171
2" Medium 95172
3" Medium 95173
1-1/2" Medium 95271
Size Part No.
2" Hard 95272
3" Hard 95273
3'" Hard 95268
478 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FIBER DISCS
3Z Specialty Fiber Discs
Primary application: Stainless Steel, High
Tensile Steel, Titanium, Aluminum
Secondary application: Ferrous and/or
Non-Ferrous Metals
• Premium zirconium grain
• Special zirconium grain to reduce heat
build up and reduce loading
• Closed coat structure for very
aggressive material removal
Aluminum Oxide and Specialty Discs
3A Aluminum Oxide
Primary application: Stainless Steel, High
Tensile Steel, Titanium, Aluminum
Secondary application: Ferrous Metals
• Premium aluminum oxide grain with
grinding aid
• Special aluminum oxide grain to reduce
heat build up and reduce loading
• Closed coat structure for more material
removal and better finishing
Grit Part No.
3A 4-1/2" x 7/8"
36 52890
50 52891
60 52892
80 52893
Grit Part No.
3A 4-1/2" x 7/8"
100 52894
120 52895
3A 7 x 7/8"
36 52836
Z Zirconium Fiber Discs
Primary application: stainless steel, high
tensile alloys
Secondary application: ferrous and/or non-
ferrous metals (iron, steel,
welds, etc.)
• Zirconium grain
• Closed coat structure for aggressive
stock material and long life
Grit Part No.
Z 4-1/2" x 7/8"
24 59224
36 59236
50 59250
60 59260
80 59280
Z 5" x 7/8"
24 59324
36 59336
50 59350
60 59360
80 59380
Grit Part No.
Z 7" x 7/8"
24 59624
36 59636
50 59650
60 59660
80 59680
Z 9-1/8" x 7/8"
24 59824
36 59836
50 59850
60 59860
80 59880
Grit Part No.
2A 4" x 5/8"
24 56024
36 56036
50 56050
60 56060
80 56080
100 56100
120 56120
3Z 4-1/2" x 7/8"
36 58236
50 -
60 58260
80 58280
100 -
120 51120
Grit Part No.
3Z 5" x 7/8"
36 58336
50 -
60 58360
80 58380
100 -
120 -
3Z 7" x 7/8"
36 58636
50 -
60 58660
80 58680
100 -
2A Aluminum Oxide
Primary application: Ferrous and/or Non-
Ferrous metals
Secondary application: Wood,
Fiberglass, etc.
• Aluminum oxide grain
• General purpose
• Closed coat structure for more
material removal and better finishing
Grit Part No.
2A 4" x 5/8"
24 56024
36 56036
50 56050
60 56060
80 56080
100 56100
120 56120
2A 4-1/2" x 7/8"
24 51024
36 51036
50 51050
60 51060
80 51080
100 51100
120 51120
2A 5" x 7/8"
24 53024
36 53036
50 53050
60 53060
80 53080
100 53100
120 53120
Grit Part No.
2A 7" x 7/8"
16 57016
24 57024
36 57036
50 57050
60 57060
80 57080
100 57100
120 57120
2A 9-1/8" x 7/8"
16 58016
24 58024
36 58036
50 58050
60 58060
80 58080
100 58100
120 58120 Z & 3Z
2A & 3A
479
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BACKING PADS / ACCESSORIES
Sait-Lok™ Backing Pads for Resin Fiber Discs
• Smooth face backing pad for
Sait-Lok™ fiber discs
• Minimizes change-over downtime
• Complete with mounting hardware
• Supplied with nut and washers
• 5/8-11 arbor
• Low profile for short spindles
Center Nuts
• For attaching fiber discs to backing pad and
tool
• Use small* for 4", 4-1/2", 5" dia. pads
• Use large* for 7", 9" dia. pads Spanner Wrench
• Adjustable wrench for tightening and
loosening center nuts
• Fits all center nuts
Backing Pads for Resin
Fiber Discs
• Spiralcool™ backing pads’
exclusive rubber, fabric, and
fiber board construction
provide extra strength and
reliability
• Spiral ribs provide contact points
and form channels for air flow
extending disc life 30% to 50%
• Each pad is supplied with a nut as indicated
• For the 10 mm arbor pad specify nut: No.
95044 for 1.5 nut or No. 95043
for 1.25 nut
• No. 95011 also for use on
Saitblend™ discs
Notes: Pad nut
must be purchased
separately. This
backing pad is not
to be used with Sait-Lok™
quick change fiber discs
Note: Sait-Lok™
disc must be used
with threaded
backing pad
PSA Backing Pads
• For use with PSA adhesive
backed sanding discs
• 1/4" shank pads
• Threaded pads for dual action/
random orbital sanders and right
angle grinders/sanders
Sand-LightTM Surface
Conditioning Backing Pads
• For use with hook and loop style
Sand-Light™ discs
• 1/4" shank pads
• Threaded pads for dual action
random orbital sanders
• Threaded pads for right angle
grinders/sanders
Hook and Loop Backing Pads for
Paper Discs
• For use with hook and loop backed paper
discs
Sait-Lok™ and Sait-Lok-R™ Specialty Laminated Discs
Size
(inch)
Part Number Max
RPM
Arbor Soft Med Hard
4 5/8-11 Thread - 95010 - 12,000
*4-1/2 5/8 - 95011 - 11,000
4-1/2 1/2 - 95012 - 11,000
4-1/2 10 mm - 95013 - 11,000
4-1/2 14 mm - 95015 - 11,000
5 5/8 - 95016 - 10,000
7 5/8-11 Thread 95017 - - 7,000
7 5/8-11 Thread - 95018 95019 8,500
9 5/8-11 Thread 95020 95021 95022 6,500
Size (Inch) Part No.
4-1/2* 95023
4-1/2 95025
5* 95024
595026
795027
995028
Size Part No.
5/8-11 Small* 95040
5/8-11 Large* 95041
1/2-13 95042
Size Part No.
M10 x 1.25 95043
M10 x 1.5 95044
M14 x 2.0 95045
Size (Inch) Part No.
1-1/2 x 1/4 95060
2 x 1/4 95061
3 x 1/4 95062
4 x 1/4 95063
5 x 1/4 95064
5 x 5/16-24 95065
Size (Inch) Part No.
5 x 5/16-24 5/hole 95085
6 x 5/16-24 95066
6 x 5/16-24 6/hole 95086
7 x 5/8-11 95068
8 x 5/8-11 95067
Size (Inch) Part No.
4 x 1/4 95154
5 x 1/4 95153
4 x 5/16-24 95157
5 x 5/16-24 95155
6 x 5/16-24 95156
Size (Inch) Part No.
4-1/2 x 5/8-11 95159
5 x 5/8-11 95160
6 x 5/8-11 95161
7 x 5/8-11 95162
8 x 5/8-11 95163
Size (Inch) Part No.
5 x 5/16-24 95047
5 x 5/16-24 5/hole 95057
5 x 5/16-24 8/hole 95058
Size (Inch) Part No.
6 x 5/16-24 95046
6 x 5/16-24 6/hole 95056
Description Part No.
Spanner Wrench 95008
480 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CONVOLUTE WHEELS / UNITIZED WHEELS
Primary applications: Ferrous and/or Non-Ferrous Metals
Secondary application: Aluminum, Stainless Steel, High Tensile Materials
• Dense, non-woven construction for long lasting wear and high edge durability
• Smooth running for less operator fatigue
• Non-metallic for no work-piece contamination
• Smear-resistant formulation to greatly reduce the possibility of smearing
• Provides best durability, stock removal, and finest finish for increased productivity
Deburring 8S-F Medium Density
• Excellent starting point for general purpose de-burring, blending, and weld polishing
• Silicon carbide grain for fast cut rate and finest finish
• Comparable to competitive 8SF products
Deburring 9S-F Hard Density
• Excellent for aggressive de-burring, blending
• Silicon carbide grain for fast cut rate and finest finish
• Comparable to competitive 9SF products
Note: Wheels
must be run in
the direction
of the arrow as
indicated on the
wheel.
Primary application: Stainless Steel, Aluminum, High Tensile Steel
Secondary application: Ferrous and/or Non-Ferrous Metals
Series 524 - Soft Density, Medium Grade
•Silicon Carbide Grain
• General purpose cleaning, finish and polishing
Series 532 - Soft Density, Fine Grade
•Silicon Carbide Grain
• Requires light pressure for fine finishing and polishing
• Highly conformable material
• Provides clean, bright surface on stainless steel
• Finer finish than the 524 series
Series 632 - Medium Density, Fine Grade
•Silicon Carbide Grain
• Requires light pressure for fine finishing and
polishing
• Highly conformable material
• Provides clean bright stainless steel finishes,
blends tool marks, and removes slight surface
imperfections
Unitized wheels packaged 10 per box
Unitized Type 27 discs packaged 1 per box
Convulate Wheels
Size (In) Spec. Density Grain Grade Max. RPM Part No. Qty./Box
6 x 1/2 x 1 9SF Hard Silicon Carbide Fine 6,000 77810 4
6 x 1 x 1 8SF Medium Silicon Carbide Fine 6,000 77815 3
6 x 1 x 1 9SF Hard Silicon Carbide Fine 6,000 77820 3
8 x 1 x 3 9SF Medium Silicon Carbide Fine 4,500 77825 3
Unitized Wheels and Unitized Type 27 Discs
Series 731 - Medium Density, Fine Grade
•Aluminum Oxide Grain
• Light pressure for blending and finishing
• High edge durability and high degree of stock removal, while
maintaining bright finish
• Smaller contact area than the 632 series
Series 732 - Medium Density, Fine Grade
•Silicon Carbide Grain
• Light pressure for blending and finishing
• High edge durability, high degree of stock removal, maintains
bright finish
Series 811 - Hard Density, Coarse Grade
•Aluminum Oxide Grain
• Highest stock removal and edge breaking capability
• Most aggressive for de-burring
Series 821 - Hard Density, Medium Grade
•Aluminum Oxide Grain
• High stock removal, long life, productivity, very durable on edge
Size (Inch) Series Grain Density Grade Max
RPM
Part
No. Mandrel
1 x 1 x 3/16 821 A/O Hard Med 30,000 77830 95240
3 x 1/2 x 1/4 821 A/O Hard Med 18,000 77835 95002
3 x 1/4 x 1/4 524 S/C Soft Med 18,000 77840 95002
3 x 1/4 x 1/4 532 S/C Soft Fine 18,000 77845 95002
3 x 1/4 x 1/4 632 S/C Med Fine 18,000 77850 95002
3 x 1/4 x 1/4 731 A/O Med Fine 18,000 77855 95002
3 x 1/4 x 1/4 811 A/O Hard Coarse 18,000 77860 95002
3 x 1/4 x 1/4 821 A/O Hard Med 18,000 77865 95002
4-1/2 x 7/8 732 S/C Med Fine 10,000 77880 —
4-1/2 x 7/8 811 A/O Hard Coarse 10,000 77885 —
4-1/2 x 7/8 821 A/O Hard Med 10,000 77890 —
481
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CARTRIDGE ROLLS
Primary applications: Ferrous and/or Non-Ferrous Metals
Secondary application: Stainless Steel, High Tensile Steel
• Great for high speed de-burring and flash removal
• Excellent for sanding and polishing channels, fillets, recesses, side walls and bottoms of dead-end holes
Cartridge Rolls - Straight TA-X Premium Aluminum Oxide Grain
Grit Max. RPM Cartridge
Part No.
Mandrel
Part No.
3/16 x 1 x 3/32
60 26,000 38000 95108
80 26,000 38001 95108
100 26,000 38002 95108
120 26,000 38003 95108
180 26,000 38004 95108
1/4 x 1 x 1/8
60 26,000 38007 95105
80 26,000 38008 95105
100 26,000 38009 95105
120 26,000 38010 95105
180 26,000 38011 95105
240 26,000 38012 95105
320 26,000 38013 95105
1/4 x 1-1/2 x 1/8
60 26,000 38014 95104
80 26,000 38015 95104
100 26,000 38016 95104
120 26,000 38017 95104
180 26,000 38018 95104
240 26,000 38019 95104
320 26,000 38020 95104
1/4 x 2 x 1/8
60 26,000 38021 95103
80 26,000 38022 95103
120 26,000 38023 95103
5/16 x 1 x 1/8
60 26,000 38027 95105
80 26,000 38028 95105
120 26,000 38029 95105
5/16 x 1-1/2 x 1/8
60 26,000 38033 95104
80 26,000 38034 95104
120 26,000 38035 95104
3/8 x 1 x 1/8
50 26,000 38039 95105
60 26,000 38040 95105
80 26,000 38041 95105
100 26,000 38042 95105
120 26,000 38043 95105
3/8 x 1-1/2 x 1/8
50 26,000 38047 95104
60 26,000 38048 95104
80 26,000 38049 95104
100 26,000 38050 95104
120 26,000 38051 95104
180 26,000 38052 95104
240 26,000 38053 95104
3/8 x 2 x 1/8
60 26,000 38055 95103
80 26,000 38056 95103
100 26,000 38057 95103
120 26,000 38058 95103
1/2 x 1 x 1/8
50 26,000 38062 95105
60 26,000 38063 95105
Grit Max. RPM Cartridge
Part No.
Mandrel
Part No.
1/2 x 1 x 1/8
80 26,000 38064 95105
100 26,000 38065 95105
120 26,000 38066 95105
1/2 x 1-1/2 x 1/8
36 26,000 38070 95104
40 26,000 38071 95104
50 26,000 38072 95104
60 26,000 38073 95104
80 26,000 38074 95104
100 26,000 38075 95104
120 26,000 38076 95104
180 26,000 38077 95104
240 26,000 38078 95104
320 26,000 38079 95104
1/2 x 2 x 1/8
60 26,000 38080 95103
80 26,000 38081 95103
100 26,000 38082 95103
120 26,000 38083 95103
1/2 x 2 x 3/16
60 26,000 38087 95106
80 26,000 38088 95106
120 26,000 38089 95106
5/8 x 1-1/2 x 1/8
60 18,000 38093 95104
80 18,000 38094 95104
120 18,000 38095 95104
5/8 x 2 x 3/16
60 18,000 38099 95106
80 18,000 38100 95106
100 18,000 38101 95106
120 18,000 38102 95106
3/4 x 1 x 1/8
60 18,000 38106 95105
80 18,000 38107 95105
120 18,000 38108 95105
3/4 x 1-1/2 x 3/16
40 18,000 38112 95107
60 18,000 38113 95107
80 18,000 38114 95107
120 18,000 38115 95107
3/4 x 2 x 3/16
40 18,000 38119 95106
60 18,000 38120 95106
80 18,000 38121 95106
120 18,000 38122 95106
1 x 1-1/2 x 1/4
60 18,000 38126 95102
80 18,000 38127 35102
120 18,000 38128 95102
1 x 2 x 1/4
60 18,000 38132 95101
80 18,000 38133 95101
120 18,000 38134 95101
482 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CARTRIDGE ROLLS / CARBIDE BURS
Cartridge Rolls - Full Taper
TA-X premium aluminum oxide grain
• Great for high speed de-burring and flash
removal
• Excellent for sanding and polishing
channels, fillets, recesses, side walls and
bottoms of dead-end holes
Cartridge Roll Mandrel
• For use with straight and full taper cartridge rolls
Features
• Tungsten carbide construction
• Highest quality manufacturing methods
• Precision ground with diamond wheels
Benefits
• Long life and durability
• Delivers vibration-free operation
• Produces very sharp uniform cutting edges
SA SC SD SE SF SG SL SM
Grit Max. RPM Cartridge
Part No.
Mandrel
Part No.
3/8 x 1 x 1/8
60 26,000 38300 95105
80 26,000 38301 95105
120 26,000 38302 95105
180 26,000 38303 95105
3/8 x 1-1/2 x 1/8
60 26,000 38306 95104
80 26,000 38307 95104
120 26,000 38308 95104
1/2 x 1 x 1/8
60 26,000 38312 95105
80 26,000 38313 95105
120 26,000 38314 95105
180 26,000 38315 95105
1/2 x 1-1/2 x 1/8
50 26,000 38318 95104
60 26,000 38319 95104
80 26,000 38320 95104
100 26,000 38321 95104
120 26,000 38322 95104
180 26,000 38323 95104
1/2 x 2 x 1/8
60 26,000 38326 95103
80 26,000 38327 95103
120 26,000 38328 95103
5/8 x 2 x 1/8
60 18,000 38332 95103
80 18,000 38333 95103
120 18,000 38334 95103
3/4 x 1-1/2 x 1/8
60 18,000 38338 95104
80 18,000 38339 95104
120 18,000 38340 95104
3/8 x 2 x 1/8
60 26,000 38055 95103
80 26,000 38056 95103
100 26,000 38057 95103
120 26,000 38058 95103
3/4 x 2 x 3/16
60 18,000 38344 95106
80 18,000 38345 95106
120 18,000 38346 95106
Size (Inch) Part No.
1/4 x 1-1/2 x 1/4 95101
1/4 x 1 x 1/4 95102
1/8 x 1-1/2 x 1/4 95103
1/8 x 1 x 1/4 95104
1/8 x 3/4 x 1/4 95105
3/16 x 1-1/2 x 1/4 95106
3/16 x 1x 1/4 95107
3/32 x 3/4 x 1/4 95108
Tungsten Carbide Burs
Type Size Dia. Length Shank Dia. Part No.
Double Cut (Alternate Cut)
SA1 1/4 5/8 1/4 SAI45000
SA3 3/8 3/4 1/4 SAI45001
SA5 1/2 1 1/4 SAI45002
SC1 1/4 5/8 1/4 SAI45005
SC3 3/8 3/4 1/4 SAI45006
SC5 1/2 1 1/4 SAI45007
SD1 1/4 7/32 1/4 SAI45010
SD3 3/8 5/16 1/4 SAI45011
SD5 1/2 7/16 1/4 SAI45012
SE1 1/4 3/8 1/4 SAI45015
SE5 1/2 7/8 1/4 SAI45016
SL1 1/4 5/8 1/4 SAI45025
SL3 3/8 1-1/16 1/4 SAI45026
SL4 1/2 1-1/8 1/4 SAI45027
SG1 1/4 5/8 1/4 SAI45030
SG3 3/8 3/4 1/4 SAI45031
SG5 1/2 1 1/4 SAI45032
SM1 1/4 1/2 1/4 SAI45035
SM2 1/4 3/4 1/4 SAI45036
SM4 3/8 3/4 1/4 SAI45037
SM5 1/2 1 1/4 SAI45038
Non-Ferrous (Aluminum)
SA3NF 3/8 3/4 1/4 SAI45050
SA5NF 1/2 1 1/4 SAI45051
SC3NF 3/8 3/4 1/4 SAI45052
SF3NF 3/8 3/4 1/4 SAI45053
SF4NF 1/2 1 1/4 SAI45054
SF5NF 1/2 1-1/8 1/4 SAI45055
483
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE WHEELS
Wire Wheels
High Speed Mini-Grinder Crimped Wire Wheel Brushes - 4" Dia.
Crimped wire wheel brushes are less aggressivethan knot wire type for lighter-duty applications. Crimped
wire is more flexible, and leaves a superior surface finish. For weld cleaning, scale, rust, paint, adhesive and
oxidation removal, cleaning, light deburring, and flash removal, etc. Call for other Bore/Thread sizes.
Brush
Dia.
Wire
Size
Threaded Arbor
Hole Size
Arbor Hole
Nut Color
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4" .014" 5/8-11 Steel 15000 82195 82316
COMBITWIST® Knot Wire Wheel Brushes
For heavy-duty metalworking applications (descaling,rust removal, deburring, weld dressing, removal of adhesive residue). Innovative
COMBITWIST® knot design dramatically improves brush performance over conventional standard twist knot styles. COMBITWIST®
knots maintain their form longer, even when used on edges and in corners.
Brush
Dia.
Wire
Size
Arbor
Hole Size
Face
Width
# of
Knots
Trim
Length
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4" .014" 5/8-11 5/8" 22 7/8" 20000 82383 82412
4" .020" 5/8-11 5/8" 22 7/8" 20000 82384 82413
5" .020" 5/8-11 5/8" 24 1-1/8" 15000 82680 82749
6" .014" 5/8-11 5/8" 33 2-1/8" 9000 82681 —
6" .023" 5/8-11 5/8" 33 1-1/4" 9000 82683 82753
Stringer Bead Twist Knot Wire Wheel Brushes
Stringer bead twist knot wheel brushes are tightly twisted for low flex, high impact brushing action. Designed for root and hot pass
weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is desired for controlled,
confined surface contact area. Root and hot pass weld cleaning, applications requiring most aggressive brushing action.
Brush
Dia.
Wire
Size
Arbor
Hole Size
Face
Width
# of
Knots
Trim
Length
MSFS
MAX
RPM
Steel
Part No.
Stainless Steel
Part No.
4" .020" 5/8-11" 3/16" 32 3/4" 20000 82186 82307
4-7/8" .020" 5/8-11" 3/16" 48 3/4" 15000 82483 82608
6" .020" 5/8-11" 3/116" 48 1-1/8" 12500 82487 82612
High Speed Mini-Grinder Standard Twist Knot Wire Wheel Brushes
Standard twist knot wheel brushes with a threaded nut for easy change-up. Features loosely twisted knots for aggressive brushing
action with a good surface finish. They are ideal when heavy-duty or severe cleaning is required. For weld cleaning, weld spatter
removal, scale removal, cleaning, deburring, and flash removal. 5/8" face width.
Brush
Dia.
Wire
Size
Threaded Arbor
Hole Size
# of
Knots
MSFS
MAX RPM
Steel
Part No.
Stainless Steel
Part No.
4" .014" 5/8-11 22 20000 82153 82283
4" .020" 5/8-11 22 20000 82154 82284
5" .020" 5/8-11 24 15000 82470 82596
6" .014" 5/8-11 33 9000 82471 —
6" .023" 5/8-11 33 20000 82473 82598
This catalog is comprised mostly of items we carry in stock. NEFCO adds new items to
its inventory regularly. If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
484 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Shoe Handle Wire Scratch Brushes
• 10" Overall Length; 1-3/16" Trim Length
• Carbon Steel Wire
Block
Width Wire Rows Length of
Brush Part Std Pkg Part No.
1-1/8" 4 x 16 5" 12 85033
BENCH GRINDING WHEELS / WIRE SCRATCH BRUSHES
Type 1 Bench Grinding Wheels
A
Primary application: Ferrous Metals
(Carbon Steel, Steel, Iron,Forgings, etc.)
• Aluminum oxide grain
• General purpose
• For sharpening tools and light stock
removal
Premium Fine Counter Duster
• For fine or light applications
Material Trim
Length
Length of
Brush Part Std Pkg Part No.
Black
Horsehair 2-1/2" 8" 12 89390
Heavy Duty Coarse Counter Duster
Excellent shop brushes for heavier material
removal general factory and store dusting.
Material Trim
Length
Length of
Brush Part Std Pkg Part No.
Black
Tampico 2-1/2" 8" 12 89402
Curved Handle Scratch Brush
• 13-3/4" Overall Length; with Scraper
• Carbon Steel Wire Fill Material 1-3/16" Length
Block
Width Wire Rows Length of
Brush Part
Carbon
Steel P/N
Stainless
Steel P/N
7/8" 3 x 19 6" 85045 85047
7/8" 3 x 19 6-1/4" 85003 with scraper
GC
Primary application: Ferrous and/or Non-
Ferrous Metals
• Green silicon carbide grain
• Extremely sharp grain for faster, burr
free cutting
• Use on carbide tipped tools, cast iron
Aluminum Oxide
Dia. Width Bore Max. RPM A24 A36 A46 A60 A80
6" 1/2" 1" 4138 — SAI28003 — SAI28004 SAI28005
6" 3/4" 1" 4138 — SAI28000 — SAI28001 SAI28002
6" 1" 1" 4138 — SAI28006 — SAI28007 SAI28008
7" 3/4" 1" 3600 — SAI28010 — SAI28011 SAI28012
7" 1" 1" 3600 — SAI28013 — SAI28014 SAI28015
8" 3/4" 1" 3600 — SAI28020 — SAI28021 SAI28022
8" 1" 1" 3600 — SAI28023 — SAI28024 SAI28025
10" 1" 1-1/4" 2483 — SAI28040 SAI28043 SAI28041 SAI28042
10" 1-1/2" 1-1/4" 2483 — SAI28050 SAI28053 SAI28051 SAI28052
12" 2" 1-1/2" 2069 SAI28060 SAI28063 SAI28061 SAI28062 —
14" 2" 1-1/2" 1773 SAI28070 SAI28073 SAI28071 SAI28072 —
Green Silicon Carbide
Dia. Width Bore RPM GC60 GC80 GC120
6 3/4 1 4138 SAI28100 SAI28101 SAI28102
6 1 1 4138 SAI28103 SAI28104 SAI28105
7 1 1 3600 SAI28113 SAI28114 SAI28115
8 1 1 3600 SAI28123 SAI28124 SAI28125
10 1 1 2483 SAI28140 SAI28141 SAI28142
10 1-1/2 1-1/4 2483 SAI28150 SAI28151 SAI28152
12 2 1-1/2 2069 SAI28160 SAI28161 SAI28162
14 2 1-1/2 1773 SAI28170 SAI28171 SAI28172
Small Cleaning Scratch Brush
• 7-1/2" Overall Length
• Bronze or Stainless Wire Fill Material
• 1/2" Trim Length
Block
Width Wire Rows Length of
Brush Part
Bronze
P/N
Stainless
Steel P/N
1/2" 3 x 7 1-1/2" 85056 85055
Standard Straight Back Block Brush
• 7-14" Overall Length
• Carbon Steel Wire Fill Material 1-3/16" Length
Block
Width Wire Rows Trim
Length Std Pkg Part No.
2-1/4" 6 x 19 1-3/4" 12 85082
485
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
NYLON / WIRE BRUSHES
Nylon Abrasive Brushes
• Excellent for mechanical
finishing operations
• Brushes can be used on both
external and internal surface
areas
• Unique nylon filaments are
impregnated with abrasive grain
• Available in silicon carbide
grain for a wide range of
applications
• Use on steel, aluminum,
copper, brass, stainless steel, super alloys, plastics,
composites, ceramics, wood and leather
Large Diameter Wheels
• Packaged (1) per box
Dia. Arbor Grit Face
Width
Trim
Length
Max
RPM
Part
No.
3" 5/8" 80 1/2" 5/8" 20,000 04110
3" 5/8" 320 1/2" 5/8" 20,000 04120
4" 5/8" 120 5/8" 3/4" 12,000 04130
4" 5/8" 180 5/8" 3/4" 12,000 04140
6" 2" 120 7/8" 1-1/16" 6,000 04150
6" 2" 180 7/8" 1-1/16" 6,000 04160
Small Diameter Wheels
• Packaged (4) per box
Dia. Arbor Grit Face
Width
Trim
Length
Max
RPM
Part
No.
1-1/2" 1/2" 320 1/4" 1/4" 20,000 04210
2" 5/8" 120 3/8" 7/16" 15,000 04220
2-1/2" 5/8" 120 3/8" 11/16" 15,000 04230
2-1/2" 5/8" 320 3/8" 11/16" 15,000 04240
Cup Brushes
• Packaged (1) per box
Dia. Arbor Grit Trim
Length
Max
RPM
Part
No.
4" 5/8-11 80 1-1/2" 6,000 04310
6" 5/8-11 80 1-1/2" 6,000 04340
End Brushes
Dia. Grit Trim
Length
Overall
Length
Max
RPM
Part
No.
Pkg.
Qty.
1" 120 1" 2-3/4" 19,000 04380 12
1" 80 1" 2-3/4" 19,000 04390 6
Tube Brushes
Dia. Grit Trim
Length
Overall
Length
Part
No.
Pkg.
Qty.
1/2" 80 2" 5" 04270 12
1" 80 2-1/2" 5-1/2" 04275 12
1-1/4" 80 2-1/2" 5-1/2" 04280 12
5/8" 120 2" 5" 04285 12
1" 120 2-1/2" 5-1/2" 04290 12
Crimped Wire
Knot Wire
Additional Arbors Available
Wire Brushes - Packaged 1 per pkg.
Part No. Size Part No. Size
95201 2 x 1/2 95206 2 x 1
95203 2 x 5/8 95207 2 x 1-1/4
95204 2 x 3/4
** Not available for Part Nos. 09558 and 09555
Blue
Size Trim Max. Industrial Line™
Dia. Wire Arbor Rows Length RPM Part No. Part No.
4 .020 5/8-11 1 1-3/8 9,000 03407 06407
4 .020 5/8-11 1 Stainless* 9,000 03406 06406
6 .020 5/8-11 1 1-3/4 6,600 03409 06409
6 .035 5/8-11 1 1-3/4 6,600 03410 06410
6 .020 5/8-11 2 1-3/4 6,000 03411 06411
6 .035 5/8-11 2 1-3/4 6,000 03412 06412
6 .020 5/8-11 1 Stainless* 6,000 03413 06413
* 302 stainless steel wire used
Blue
Size Trim Max. Industrial Line™
Dia. Wire Arbor Rows Length RPM Part No. Part No.
4 .020 5/8-11 - 1-1/8 9,000 09551 06551
5 .020 5/8-11 - 1-1/2 8,000 09552 -
5 .020 5/8-11 Stainless* 1-1/2 8,000 09554 06554
6 .020 5/8-11 - 1-1/2 6,600 09553 06553
Large Cup Brushes
Primary Application: For fast cleaning of
large surfaces
Available in:
• Knot wire for low to medium flexibility
and aggressive cutting action
• Crimped wire which has higher
flexibility for light cleaning and
removal, especially on irregular surfaces
Wire Face Trim Max. Industrial Blue LineTM
Dia. Size Arbor Width Length RPM Part No. Part No.
6 .014 5/8, 1/2 Wide 1-1/16 6,000 09557 06557
6 .014 5/8, 1/2 Narrow 1-3/16 6,000 09558** 06558
6 .008 5/8, 1/2 Narrow 1-1/16 6,000 09555** 06555
7 .014 5/8 Wide 1-9/16 6,000 09559 06559
8 .014 5/8 Wide 1-1/2 4,000 01411 06556
10 .014 3/4 Wide 2 3,600 09560 -
Wire Brushes for Bench or
Straight Shaft Grinders
Primary application: For general
scale removal, cleaning and surface
preparation
• Dense, compact crimped steel wire
brush face
• May be stacked to achieve wider
work face
• Standard 2" arbor, with adaptor to
listed arbor
• Includes brushing pairs to adapt to
variety of arbors
• Additional arbors available (** Not available for part number
09558 and 09555)
486 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIRE / END BRUSHES
Crimped Wire Cup Brushes
For light duty application and surface cleaning. Flat brushing, edge cleaning, and flash removal. They
are designed for 4-1/2" and 5" grinders.
Brush
Dia.
Wire
Size
Threaded Arbor
Hole Sizes
Trim
Length
MSFS
MAX RPM
Carbon Steel
Part No.
Stainless Steel
Part No.
2-3/4" .014" 5/8-11 7/8" 14000 82243 82353
3-1/2" .014" 5/8-11 7/8" 12500 82249 82359
4" .014" 5/8-11 1-1/4" 9000 82510 —
4" .020" 5/8-11 1-1/4" 9000 85211 82635
5" .020" 5/8-11 1-1/4" 8000 82515 82637
6" .020" 5/8-11 1-1/4" 6000 82517 82638
Knot Wire Cup Brushes
For use on large surfaces where a great deal of roughing is required. Good for corners and angles, and
removal of contaminants such as scale, concrete, slag, and marine growth
Brush
Dia.
Wire
Size
Threaded
Arbor
Hole Sizes
Trim
Length
MSFS
MAX RPM
Carbon Steel
Part No.
Stainless
Steel Part
No.
2-3/4" .014" 5/8-11 7/8" 14000 82219 82329
2-3/4" .020" 5/8-11 7/8" 14000 82220 82330
3-1/2" .014" 5/8-11 7/8" 12000 82231 82341
4" .014" 5/8-11 1-1/4" 9000 82522 82647
4" .020" 5/8-11 1-1/4" 9000 82523 82648
4" .035" 5/8-11 1-1/4" 9000 82524 —
5" .023" 5/8-11 1-1/4" 7000 82529 82652
6" .023" 5/8-11 1-1/4" 6000 82531 82654
6" .023" 5/8-11 1-1/4" 6000 82532 —
Crimped Wire End Brushes
General purpose for working hard-to-reach places. For
use on portable air and electric tools. Used for rubber
and plastic flash removal, paint and rust removal, die,
mold and tool polishing.
Brush
Dia.
Wire
Size
Brush
Length
Shank
Dia.
MSFS MAX
RPM
Steel
Part No.
Stainless
Part No.
1/2"
.006"
1" 1/4" 25000
82962 82981
.008" 82963 82982
.010 82964 82983
.014 82965 82984
.020 82966 82985
3/4"
.006"
1" 1/4" 20000
82967 82986
.008" 82968 82987
.010 82969 82988
.014 82970 82989
.020 82971 82990
1"
.006"
1" 1/4" 20000
82972 82991
.008" 82973 82992
.010 82974 82993
.014 82975 82994
.020 82976 82994
Knot Wire End Brushes
For heavy-duty and severe applications, recessed
areas and corners such as weld and mold cleaning.
Brush
Dia.
Wire
Size
Brush
Length
Shank
Dia.
MSFS MAX
RPM
Steel
Part No.
Stainless
Part No.
1/2"
.006"
1-1/8" 1/4" 25000
83063 83085
.010 83064 83086
.014 83065 83087
3/4"
.006"
1-1/8" 1/4" 20000
83070 83090
.010 83071 83091
.014 83072 83092
.020 83073 83093
1"
.006"
1-1/8" 1/4" 20000
83077 83096
.010 83078 83097
.014 83079 83098
.020 83080 83099
487
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE WHEELS / BRUSHES
Knot and Crimped Wire Wheels
For use on Small Grinders
Available in:
• Regular twist covers more surface
area in a single pass
• Stringer bead twist excellent for
welds, flux removal and where a
narrow work face is required
• Crimped carbon steel wire provides
flexibility and a wider work face than
knot style
• Stainless steel wire for use on stainless,
aluminum, and high strength alloys
• Standard Arbor: 5/8-11; Std Packaging: 6
• Variety of threaded arbors available
Diameter Wire Size Material Max RPM Part No.
Regular Twist
4 .014 Carbon 20,000 03426
4 .020 Carbon 20,000 03460
4 .014 Stainless* 20,000 03431
4 .020 Stainless* 20,000 03461
Stringer Bead
4 .020 Carbon 20,000 03440
4 .020 Stainless* 20,000 03445
5 .020 Carbon 12,000 03380
5 .020 Stainless* 12,000 03382
Crimped
4 .014 Carbon 12,500 03450
*302 stainless steel wire used
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
Cup Brushes For use on Small Grinders
Available in:
• Knot wire for low to medium flexibility and aggressive cutting
action
• Crimped carbon steel wire for light
cleaning and where greater flexibility
required
• Stainless steel wire for use on
stainless, aluminum, and high
strength alloys
•Standard Arbor: 5/8-11
• Variety of threaded arbors available
Dia. Wire
Size Style Material Max
RPM
Part
No.
2-3/4" .014 Knot Carbon 12,500 03414
2-3/4" .020 Knot Carbon 12,500 03501
2-3/4" .014 Knot Stainless* 12,500 03419
2-3/4" .020 Knot Stainless* 12,500 03506
2-3/4" .014 Crimped Carbon 12,500 01401
2-3/4" .014 Crimped Stainless* 12,500 01408
3-1/2" .020 Knot Carbon 12,500 03511
3-1/2" .020 Knot Stainless* 12,500 03512
3-1/2" .014 Crimped Carbon 12,500 03513
3-1/2" .014 Crimped Stainless* 12,500 03514
*302 stainless steel wire used
Miscellaneous Brushes
Metal Chip Brush
• Durable, long lasting
• For cleaning metal chips from
work surfaces
Acid Brushes
• Quality horsehair bristles
• Machine trimmed and
crimped to specification
Paint Brushes
• Quality horsehair bristles
• Wood handle
Brush Type Width Trim
Length
Overall
Length Part No. Std.
Pkg.
Metal chip 1-1/2 1-1/2 5-5/16 00510 12
Acid brush 3/8 3/4 6 00501 144
7/16 3/16 6-1/2 00502 144
9/16 7/8 6-1/8 00503 144
Paint brush 1/2 1-1/2 7 00511 72
1 1-1/2 7-1/2 00512 72
1-1/2 1-1/2 7-1/2 00513 72
2 1-1/2 7-1/2 00514 72
3 1-1/2 8 00515 48
4 2-1/4 9-1/2 00516 12
V Groove 3 x 14 9-1/2 05765 12
Scratch Wire Size:.012
Singletwist® Knot Wire End Brush
A single, twisted wire knot, designed especially for brushing
internal corners and edges where access is limited. The strength
of the knotted wire allows adequate pressure to be applied
to quickly remove rust, scale, corrosion, etc. with ease from
these formerly troublesome areas. Available in carbon steel and
stainless steel wire in 3 sizes:
Fine: .006 for light brushing action and superior surface finish.
Medium: .014 for general purpose removal with good finish
Coarse: .020 for most aggressive brushing action where surface
finish is not critical.
All brushes - Diameter: 1/4", Shank Diameter: 1/4", Trim
Length: 1-1/8", Overall Length: 2-3/4", MSFS Max RPM: 20000
Wire Size Carbon Steel P/N Stainless Steel P/N
.006 Fine 83107 83283
.014 Medium 83108 83284
.020 Coarse 83109 83285
488 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Round Wire Double Spiral Flue Brushes
Primarily used for internal cleaning of pipes or flues
Applications:
• Manual or power cleaning of pipes and flues
• All standard flues are referred to by their
outside measurements which are usually 1/4"
larger than the inside diameter.
• An Osborn flue brush to fit a standard flue is
also designated by the flue’s outside diameter.
• For example: The diameter of a 3" flue brush
is approximately 2-3/4" or the inside diameter
of a standard 3" flue.
INTERNAL (TUBE) BRUSHES
Helituf® Crimped Wire Internal Brushes
• Heavily Filled - Rugged Brushing Tools
• Suitable for use by hand or in Power Tools
Applications:
Cleaning the entire inside circumference of a hole - cleaning out threaded areas
- Brushing edges of keyways and other recesses
Note: Stainless brushes above have stainless stems.
*All Flue Brushes are fitted with 1/4" standard nipples except No. 51060 (3/4" flue
size) which has a 1/8" nipple.
Working Brush
Diameter Wire Size Length of Brush Stem Diameter Overall Length Steel Part No. Stainless Steel
Part No.
1/4" .005" 1" 1/8" 3-1/2" 36012 —
3/8" .005" 1" 1/8" 3-1/2" — 36147
7/16" .005" 1" 1/8" 3-1/2" — 36151
1/2" .005" 1" 1/8" 3-1/2" 36032 36155
5/8" .005" 1" 1/8" 3-1/2" 36042 36163
11/16" .005" 1" 1/8" 3-1/2" 36047 —
7/8" .005" 1" 1/8" 3-1/2" — 36179
1" .005" 1" 1/8" 3-1/2" 36072 —
Flue Size Exact Size Wire size Brush Length Part No.
3/4 1/2 .010 4-1/2 51060*
1-1/4 1 .010 4-1/2 51064
1-1/2 1-1/4 .0118 4-1/2 51065
1-3/4 1-1/2 .0118 4-1/2 51066
2 1-3/4 .0118 4-1/2 51067
3 2-3/4 .014 4-1/2 51071
Crimped Wire Tube Brushes - Double Stem - Double Spiral
Diameter Wire
Size
Brush
Length
Overall
Length
Steel
Part No.
Stainless Steel
Part No.
1/2" .006" 2" 5" 51021 —
5/8" .006" 2" 5" — 51088
5/8" .0104" 2" 5"" 51024 51090
3/4" .0104" 2-1/2" 5 51027 51093
7/8" .006" 2-1/2" 5" 51028 —
7/8" .0104" 2-1/2" 5" 51030 51096
• Can be used for numerous internal cleaning jobs
Applications:
Internal cleaning, removal of small imperfections,
surface preparation
Can also be used as a Hand Tool Mounted in a Drill
Press or on a Portable Power Tool
Nylon Tube/Spout Brushes Crimped Wire Tube Brush
Brush
Diameter
Bristle
Diameter
Brush
Length
Overall
Length Part No.
1/4" .005" 2" 6-1/4" 51100
1-1/2" .010" 5" 15-1/2" 51106
2" .010" 5" 15-1/2" 51108
Brush
Diameter
Bristle
Diameter
Brush
Length
Overall
Length Part No.
3/8" .006" 1-1/2" 8" 51006
489
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
On-Site Supplies
CEP
Quick Reference
Specialty Products
Access Doors . . . . . . . . . 506 - 521
Cadweld® Grounding Connections /
Cadweld® Plus . . . . . . . . 503 - 505
Firestop - Grace - IPC. . . 500 - 502
Firestop - STI . . . . . . . . . 490 - 499
Link Seals / Innerlynx . . . 522 - 523
On-Site Tools & Equipment
Cement ..................566
Cold Weather Supplies /
Batteries .................530
Brushes ..................545
DeWalt® Storage Boxes . . . . . .536
Extension Cords . . . . . . . . . . . .527
Fencing, Temporary . . . . . . . . .566
Floor Protection . . . . . . . 539 - 540
Garbage Cans. . . . . . . . . . . . . .549
Greenlee® Storage Boxes 532 - 534
Hammers / Bars . . . . . . . . . . . .565
Hose Accessories . . . . . . . . . . .561
Hoses . . . . . . . . . . . . . . 560 - 561
Igloo® Water Coolers . . . . . . . .561
Jobox® Storage Boxes . . . . . . .535
Ladders . . . . . . . . . . . . . 524 - 526
Markers . . . . . . . . . . . . . 542 - 543
MasterLock®...............537
Portable Lighting, Flashlights,
Light Strings. . . . . . . . . . 527 - 529
Pumps, Sump, Trash. . . . . . . . .559
Paints . . . . . . . . . . . . . . 543 - 544
Rakes....................565
Rope ....................573
Safety Cans . . . . . . . . . . . . . . .563
Scaffolds .................526
Shovels / Scoops . . . . . . . . . . .564
Silicone Caulk. . . . . . . . . . . . . .544
Spray Paint . . . . . . . . . . . . . . .543
Surface Protection . . . . . 538 - 540
Tape . . . . . . . . . . . . . . . 541 - 542
Tarps / Sheeting . . . . . . . . . . . 538
Temp. Power Distribution Centers
. . . . . . . . . . . . . . . . . . . . . . . .531
Two-Way Radios. . . . . . . 583 - 584
Wheel Barrows / Mixing Pans 566
Wire Rope & Accessories 571 - 573
Material Handling
Carts . . . . . . . . . . . . . . . 547 - 548
Chain and Accessories 574 - 576
Chain Slings . . . . . . . . . . . . . . .579
CM Hoists . . . . . . . . . . . 577 - 578
CM Pullers................576
EL-405 Stacker Lift . . . . . . . . .547
Eyebolts. . . . . . . . . . . . . 569 - 570
LugAll Hoists . . . . . . . . . . . . . .580
Machinery Eye Bolts / U-Bolts 570
Material Handling. . . . . . . . . . .567
Material Lifts . . . . . . . . . 546 - 547
Nylon Slings . . . . . . . . . . 581 - 582
Turnbuckles . . . . . . . . . . 568 - 569
Wire Rope Slings . . . . . . . . . . .580
Maintenance & Shop Supplies
Aerosol Chemicals . . . . . . . . . .555
Bandsaw Blades . . . . . . . 596 -597
Bandsaw Blade Selection
Guide....................596
Bessey Clamps . . . . . . . . 588 - 589
Carr Lane.................585
Clean-Up / Brooms . . . . . . . . . .551
Fans.....................562
Industrial Lubricants . . . . . .555
Mops....................550
Sawing Fluids / Lubricants. . . . .598
Sorbents .................558
Vacuum Cleaners . . . . . . . . . . .557
Vises ....................586
Wilton Clamps . . . . . . . . . . . . .587
Wipers...................556
Products for Roofing 590 - 595
490 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FIRESTOPPING SELECTOR GUIDE - STI
• Metallic Pipes
• Loose Cables
Intumescent Sealants • Cable Trays Medium to small openings
Series SSS • Bus Duct in all constructions
Series LCI • Multiple Pipes
• Insulated Pipes
• Plastic Pipes
Intumescent Collars Combustible Penetrants
Series SSC • Plastic Pipes (Factory Manufactured)
Series LCC
Intumescent Putty, • Metallic Pipes Small openings in all
Putty Pads • Loose Cables constructions
• Electrical Boxes (easy retrofit) electrical boxes
Series SSP or EP (pads or inserts)
Firestop Pillows • Cable Tray Medium to large openings
Series SSB • Power, Voice, Data Cables (easy retrofit)
• Fan Coils
Intumescent Wrap Strips • Insulated Pipes Combustible Penetrants
Series SSW • Plastic Pipes (field fabricated)
• Control/Expansion Joints
(Wall and Floor)
• Slab Edge Conditions
Elastomeric Spray • Head of Wall - Concrete Architectural joints,
Series AS Fluted Deck to Gypsum Wall non-combustible piping
• Head of Wall - Concrete Slab (spray applied)
to Masonry Wall
• Metallic Pipes
• Steel Ducts
• Control/Expansion Joints
(Wall and Floor)
• Slab Edge Conditions
Elastomeric Sealant • Head of Wall - Concrete
Series ES Fluted Deck to Gypsum Wall Architectural joints
• Head of Wall - Concrete Slab
to Masonry Wall
• Joints and Gaps in
Sound Barriers
• Safing and Construction Gaps
Silicone Sealant • Seismic Joints Construction joints, pipes with
Series PEN300 • Curtain Wall Joints high temperature or movement
• Metallic, Steam Pipes
• Cable Trays
Silicone Foam Series • Insulated Pipes Large openings through
PEN200 • Bus Duct concrete floors and walls
• Plastic Pipes
• Multiple Pipes
• Cable Trays
Fire Rated Mortar • Multiple Pipes Large openings through
Series SSM • Bus Duct concrete floors and walls
• Insulated Pipes
• Plastic Pipes
1
2
3
4
5
6
7
8
9
10
491
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
SpecSeal® Series
SSS Intumescent Sealant
SpecSeal® Series
LCI Intumescent
Sealant SpecSeal® Series
SSP Intumescent Putty
SpecSeal® Series
SSB Pillows
Premium grade latex based,
Intumescent Sealant
Standard grade latex based,
Intumescent Sealant
Soft, pliable,
Intumescent Putty
Compressible, lightweight,
Intumescent Pillows
Tested and Classified for
Fire Resistance
• Metallic Pipes including steel, iron
or copper pipe and tubing through
all common constructions
• Non-metallic Pipes, Conduits and
Tubing including PVC, CPVC, PVDF,
PEX, PEX-AL-PEX, ABS, PB through
all common constructions
• Cable, Cable Trays and Bus Duct
• HVAC Ductwork
• Insulated Pipes
• Multi-Service Penetrations
including AC line sets, electrical,
telephone, or TV service entrance
and interior penetrations
• Complete Wood Floor firestopping
package for electrical, plumbing,
HVAC, TV and telephone
• Small to medium sized openings
through all common constructions
• 2-Stage expansion = fast acting
protection for combustible
penetrants
• High solids content = no shrinkage
or cracking
• Water-based = safer to use; no
disposal problems
• Water resistant = will not re-
emulsify after drying
• Flexible and resilient = allows pipe
movement
Color: Red
Solids content: 80% ± 2%
Density: 9.4 lb/gal
Expansion begins: 230°F (110°C)1st
stage; 350°F (177°C) 2nd stage.
Expan. range: 230°F to > 1,000°F
(100°C to > 538°C)
Volume of expansion: > 5X (free
expansion)
Flame-Spread: 0*
Smoke developed: 10*
* Tested to ASTM E84 (UL723) at
14% surface coverage (modified
test for sealants and caulks).
Tested and Classified for
Fire Resistance
• Metallic Pipes including steel, iron
or copper pipe and tubing
• Non-metallic Pipes, Conduits and
Tubing including PVC, CPVC, ABS,
and PEX
• Electrical and Electronic Cabling
including service entrance, power
distribution, computer, telephone,
and television
• Metal Ductwork including HVAC,
bath and dryer vents
• Insulated Pipes including heating,
cooling, and condensation
applications
• Complete Wood Floor firestopping
package for electrical, plumbing,
HVAC, telephone and television
• Small to medium sized openings
through all common constructions
• High performance…without the
high price!
• Highly intumescent…expands up to
10X
• Excellent smoke seal
• Water resistant…will not re-
emulsify when dry
• Water-based for easy installation,
cleanup, and disposal
• Acoustically tested…reduces noise
transmission
Color: Pale Red
Odor: Mild Latex
Density: 9.0 lb/gal / pH 9.0
Expansion begins: 320°F (160°C)
Volume expansion: 10X free expansion
In-Service Temp. < 130°F (54°C)
Flame-Spread: 0*
Smoke development: 5*
STC Rating: 50
VOC Content**: 0.00lb/gal (0.0 g/l)
* Tested to ASTM E84 (UL723) at
14% surface coverage (modified test
for sealants and caulks).
** ASTM D 3960 and EPA Federal
Reference Method 24
• Piping: Non-combustible steel or
iron
• Jacketed Cables
• Small to medium sized openings
through all common constructions
• Non-hardening = easy to retrofit
• 2-stage expansion = fast acting
protection for combustible
penetrants
• Highly adhesive - adheres to all
construction materials; allows
movement
• Soft and pliable = easy installation
• Water resistant = contains minor
water spills
• High dielectric strength = an
excellent insulator
Color: Red
Solids content: 100%
Density: 1.45
Expansion begins: 230°F (110°C)
Expan. range: 230°F to > 1,000°F
(110°C to > 538°C)
Volume of expansion: > 5X (free
expansion)
• Loose Cable: Power, voice, data
• Cable Trays: Steel and aluminum
• Multiple Cable Trays Piping: Fan
coil units
• Innerducts
• One side access
• Large to medium sized openings
through masonry walls and floors
and gypsum-board walls
• Intumescent = expansion in all
directions means a tight seal
• Reinstallable = easy retrofit of
cables
• Lightweight = Lighter screen
requirements
• Heat Sealed Poly Bag = strong and
durable, slide in and out easier; no
sewn seams to unravel, no irritating
fiberglass
• Monolithic encapsulated core = no
loose fill, tougher, resilient
• No special tools required
Color: Red
Expansion: 1/2” in all directions
Density: 4 PCF (nominal) (53 kg/m)
In-Service Temp.: = 130°F
Flammability*: V-0
Compression**: 25%-33%
Air Leakage: Less than 1 CFM/sq ft
(L Rating) UL1479 (pillows only)
* Outer poly Bag
** As installed
Applications
Recommended Uses
Features and Benefits
Technical Data
National Agency Approvals
FIRESTOPPING SELECTOR GUIDE - STI / SPECSEAL
492 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
A Great Combination of Price and Perfor-
mance in a Firestop Sealant.SpecSeal®
Series LCI is a standard grade intumes-
cent sealant specifically engineered and
tested to economically address many
common firestop applications.
Features & Benefits:
• Economical: Intumescent perfor-
mance at non-intumescent prices!
• Highly Intumescent: Expands up
to 10X
• Safe for Contact With Plastics
• Water-Based for easy installation
and cleanup.
• Water-Resistant: Will not re-emulsify
when dry.
• Acoustically Tested: Reduces
sound transmission.
• Low VOCs: Safe. No solvents.
Non-halogenated.
• Pale Red: For easy identification.
Part Case Wt. (lbs.)
No. Description Qty. Each
LCI300 Intumescent Sealant 10.1 oz. Tube 12 0.94
LCI305 Intumescent Sealant 5 gal Pail 1 50.00
LCI320 Intumescent Sealant 20 oz. Sausage 12 1.59
The economical solution for firestopping
common plastic pipe that doesn’t
compromise safety or performance.
Features & Benefits:
• Economical! High performance
without the high price!
• Easy Installation: Uses STI's quick
closure design.
• Expands Quickly to seal off burn-
ing penetrants.
• Highly Intumescent expands up<
to 60X.
• Safe for contact with plastics.
• Water Resistant: No soluble or
hygroscopic ingredients!
• Compact Profile: A great fit for
tight spaces!
FIRESTOPPING - STI
Series LCI Intumescent Sealants
Applications
• Metallic pipes including steel,
iron, or copper pipe and tubing.
• Nonmetallic pipes, conduits &
tubing including PVC, CPVC,
ABS, & PEX.
• Electrical & electronic cabling
including service entrance,
power distribution, computer,
telephone, & television.
• Metal ductwork including HVAC,
bath and dryer vents.
• Insulated pipes including heat-
ing, cooling, and condensation
applications.
• Complete wood floor firestop-
ping
package for electrical,
plumbing, HVAC, telephone, and
television.
Series LCC Intumescent Firestop Collars
Applications
• Combustible penetrants (factory
manufactured).
• Protects a variety of plastic pipes
PVC, PVC Foam Core (ccPVC),
CPVC, ABS, and ABS Foam Core
(ccABS).
• Vented (DWV) and closed (elec-
trical conduit and water supply)
installations.
Part Case Wt. (lbs.)
No. Description Qty. Each
LCC150 For 1.5” Dia. Plastic Pipe 6 0.22
LCC200 For 2.0” Dia. Plastic Pipe 6 0.25
LCC300 For 3.0” Dia. Plastic Pipe 6 0.49
LCC400 For 4.0” Dia. Plastic Pipe 6 0.73
SSC600 For 6.0” Dia. Plastic Pipe 2 4.67
493
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Designed for easy installation and retrofitting of cables.
Features & Benefits:
• Intumescent: Expands in all directions for a tough, tight seal.
• Reinstallable for easy cable retrofits.
• Single Side Application - easy installation for tough access openings
• Intumescent Coated on all sides for faster expansion, easier installation.
• Heat-Sealed Poly Cover protects core & makes pillows slide in & out easily.
• Superior Air leakage Ratings!
FIRESTOPPING - STI
Power Shield™ Electrical Box Inserts
Convenient fire protection for through-
penetrations & electrical wall boxes,
permitting reduced spacing as well as an
increase in allowable box sizes. No other
product is as easy & versatile to use and
has tested and proven fire resistance and
acoustical properties. Conveniently sized
to fi t a typical 1-1/2" deep 4S box with
no cutting or piecing required. Faced on
both sides with a convenient poly liner.
Series SSP Intumescent Putty Pads
A one-component pad for use in electri-
cal switch or receptacle boxes. Designed
to install inside the box, directly against
the back wall. Expands up to 24X its
original size when exposed to high tem-
peratures or flames. Requiring no tools,
conveniently sized to fit typical switch or
outlet boxes and features an adhesive
strip applied to the back of the pad to
ensure adhesion to the back of an elec-
trical box. Easily applied into an existing
box with no mess..
Features & Benefits
• Easy to Install!
• No Mess, No Residue!
• Rapid Expansion!
• High Volume Char: Expands Up
to 24X!
• Water Resistant: No soluble or
hydroscopic ingredients
• Conveniently Sized to fit com-
mon switch & receptacle boxes.
• Non-Conductive!
• Easy Retrofit!
• Low Profile: Maximizes area
inside box
• Labor Savings: Installs before
or after board installation.
Part Case
No. Description Qty.
EP44 Power Shield™ Electrical Box Insert 3.75" x 3.75" x .125" 20
EP45 Power Shield™ Electrical Box Insert 4.25" x 4.25" x .125" 20
Applications
• Seal through penetrations, con-
struction gaps & blank openings
• Electrical boxes (metallic/non-
metallic) for sound transmission
and increased fire resistance.
• Provide a cushion to allow move-
ment due to settling, expansion
and contraction, or vibration.
Features & Benefits:
• Non-Hardening for a tough, flexible seal.
• Two Stage Intumescence provides aggressive expansion.
• Endothermic Fillers absorb heat & release water.
• Highly Adhesive: Stays put! Allows movement.
• Water-Resistant: Unaffected by humidity, condensa-
tion or water.
• Soft & Pliable: Easy to install.
• Sound Deadening: Tested & proven acoustical properties.
Part Case
No. Description Qty.
SSP4S Putty Pad 7.25" x 7.25" x 3/16" 20
SSP9S Putty Pad 9" x 9" x 3/16" 20
Series SSB Intumescent Pillows
Applications
• Medium to large to openings
through masonry walls & floors
& gypsum-board walls utilizing
data, communications, power
or control cables. innerduct and
cable trays.
• One-sided shaft walls.
Part Case
No. Description Qty.
SSB14 Firestop Pillow 1" x 4" x 9" 20
SSB24 Firestop Pillow 2" x 4" x 9" 10
SSB26 Firestop Pillow 2" x 6" x 9" 22
SSB36 Firestop Pillow 3" x 6" x 9" 16
494 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Cast-In Firestop Device
Create Factory-Firestopped Openings as the concrete is poured!
Install on forms or deck in advance of the concrete pour
to form factory firestopped openings for plumbing and
electrical penetrations.
Install easily and quickly. A variety of accessories permit
installation under many common construction conditions
including variations in concrete depth and installation over
pan decks. Molded plastic body can be cut to adjust to the
depth of the pour and is tough enough to resist the rigors
of the concrete finishing process.
The chambered intumescent system expands rapidly in
the event of fire to provide up to a three hour fire rating.
A resilient gasket system seals against the propagation of
smoke and provides additional protection against transient
water exposure.
Features & Benefits
• Saves money by eliminating
core drilling
• Saves time. No firestopping
step required
• Provides pre-installed fire and
smoke sealing
• Provides added protection
against transient water.*
• Adapts to a wide variety of
construction conditions
FIRESTOPPING - STI
Applications
• 2", 3", 4", and 6" trade size
plastic or metallic pipes
• Insulated metallic pipes
• Cable bundles
• Concrete ranging in depth from
2-1/2" to 8"
• Concrete greater than 8" using
available extension tubes
• Concrete over steel deck using
available Deck Adapter Kit
Poured floor with wood forms
Concrete over steel deck Optional Metal Deck Kit Extension Tubes for Concrete Greater than 8" thick
Interlocking design to group
multiple devices
Part No. Description
For Combustible & Noncombustible Penetrants
CD200 2" Cast-In Firestop Device
CD300 3" Cast-In Firestop Device
CD400 4" Cast-In Firestop Device
CD600 6" Cast-In Firestop Device
For Noncombustible Penetrants
CD200M 2" Cast-In Firestop Device
CD300M 3" Cast-In Firestop Device
CD400M 4" Cast-In Firestop Device
CD600M 6" Cast-In Firestop Device
Part No. Description
Extension Tubes
CD200X 2" Extension Tube
CD300X 3" Extension Tube
CD400X 4" Extension Tube
CD600X 6" Extension Tube
Deck Adapter Kits
CD200DK 2" Metal Deck Adapter
CD300DK 3" Metal Deck Adapter
CD400DK 4" Metal Deck Adapter
CD600DK 6" Metal Deck Adapter
495
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FIRESTOPPING - HYDROFLAME
Cast-In Firestop Device
Corrugated Metal Deck Sleeves
The corrugated metal
deck sleeve removes all
the installation chal-
lenges, making the job of
forming these openings
simple while providing
a water/smoke/fire tight
firestop system.
Series
Cast-in
Place
Corrugated
Metal Deck Penetrant Size Range
PS-NP CD-NP Non-Metallic PVC, ccPVC , RNC, (ABS, ccABS 1/2" - 4") 1/2" - 6"
PS-CP CD-CP Non-Metallic, CPVC Flowguard Gold SDR 11, CPVC SDR 11, PEX 1/2" - 2"
PS-CN CD-CN Non-Metallic, CPVC Corzan, CPVC Blazemaster (13.5), CPVC SDR 13.5, CPVC Sch. 40 & 80 1/2" - 6"
PS-CT CD-CT Metallic, Copper 1/2" - 6"
PS-CI CD-CI Metallic, Cast Iron, (Service Weight) 2", 3" & 4"
PS-CH CD-CH Metallic, Cast Iron, (Heavy Weight) 2", 3" & 4"
PS-CX CD-CX Metallic, Cast Iron/Hubless 1-1/2", 2", 3" & 4"
PS-ST CD-ST Metallic, Steel 1/2" - 6"
PS-ET CD-ET Metallic, EMT 1/2" - 4"
Made In
America
Also Available:
• Hydro Slab Seals
• Cast-In-Place Tub Boxes
• Cast-In-Place Closet Flange
Sleeves
• Cast-In-Place Shower Drain
Sleeves
• Cast-In-Place Line Set Sleeves
• Cast-In-Place Cable Sleeves
Please call for complete listing and
information.
496 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Series AS200 Elastomeric Spray
FIRESTOPPING - STI
The Professional's Choice For Spray-Applied Firestop Protection of Joints & Penetrations
A non-halogenated latex-based, highly elastomeric coating designed to provide
passive smoke and fire protection in construction joints. Engineered to adhere
to virtually all construction surfaces and may be applied using air-less spray
equipment or with a brush (for small applications or touch ups). Dries to form a
flexible shield against the propagation of fire. Its premium latex binder system
is totally resistant to water and will not re-emulsify after drying. Contains no
inorganic fibers, asbestos, solvents.
Features & Benefits:
• Highly Elastomeric for a tough, flexible seal.
• Water-Based for easy installation and cleanup.
• Fast Drying! Fastest tack-free & dry-through times.
• Auto Bonding
• Safe... No solvents or halogens.
• Water-Resistant: Will not re-emulsify when dry.
• Low Abrasion: Longer pump life with less maintenance.
• Low VOCs: Safe. No solvents. Non-halogenated.
• Paintable
• Tested with spray applied fire resistive materials (SFRM).
Applications
• Construction Joints.
• Curtainwall safing gaps.
• Floor-to-floor, floor-to-wall,
wall-to-floor, wall-to-wall, and
head-of-wall applications.
Part Case Wt. (lbs.)
No. Description Qty. Each
AS205 Elastomeric Spray, 5 gallon Pail 1 50
(50 Gallon Drums Available on a Special Order Basis)
Series ES Elastomeric Sealants
A Flexible Approach to Sealing Fire-Rated Joints AND Reducing Sound Transfer!
A non-halogenated latex-based, highly elastomeric caulk designed to provide passive
smoke and fire protection in construction joints. This material is also designed to re-
store sound attenuation properties to sound-rated ceilings and partitions. Engineered
to adhere to virtually all construction surfaces and may be applied using standard
caulking equipment or by troweling. Dries to form a flexible shield against the propaga-
tion of fire. Its premium latex binder system is totally resistant to water and will not
re-emulsify after drying. Contains no inorganic fibers, asbestos, or solvents.
Features & Benefits:
• Highly Elastomeric for a tough, flexible seal.
• Water-Based for easy installation and cleanup.
• Spray Compatible for versatility in application or repair.
• Auto Bonding
• Safe... No solvents or halogens.
• Water-Resistant: Will not re-emulsify when dry.
• Acoustically Tested: Reduces sound transmission.
• Low VOCs: Safe. No solvents. Non-halogenated.
Applications
• Construction Joints.
• Floor-to-floor, floor-to-wall,
wall-to-floor, wall-to-wall, and
head-of-wall applications.
Part Case Wt. (lbs.)
No. Description Qty. Each
ES100 Elastomeric Sealant 10.1 oz. Tube 12 1.12
ES105 Elastomeric Sealant 5 gal. Pail 1 50.00
ES120 Elastomeric Sealant 20 oz. Sausage 12 1.96
ES129 Elastomeric Sealant 29 oz. Tube 10 3.04
497
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FIRESTOPPING - STI
Series SSM Firestop Mortar
An economical, light-weight portland
cement-based firestop product. This pas-
sive (non-intumescent) material utilizes a
combination of heat sinking and insulat-
ing properties to provide an extremely
high level of fire resistance. Mixes with
water to form a non-shrinking, high yield
mortar that may be applied by pour-
ing, pumping, or troweling. Low density
& light weight means that less forming
as and forming support is required. Its
low density makes re-penetration for
retrofitting a simple task. Designed to
dry quickly. Will not crack or spall due to
freezing or changes in temperature.
Applications
• Seal through-penetrations as
well as construction gaps and
blank openings.
• Wide range of penetrants includ-
ing metallic pipes, cables, cable
trays (both steel and aluminum),
as well as combustible pen-
etrants such as plastic pipes or
insulated metallic pipes.
• Suitable for openings of all sizes.
• Used in conjunction with other
SpecSeal
®
intumescent products.
Features & Benefits:
• Light Weight: Less forming and support required.
• Fast Drying: Forms come down faster!
• Low Density: Easy retrofit!
• Economical: Highest yield per pound means lower
installed cost.
• Wide Range of Application: Includes aluminum cable tray.
• Red Color for easy identification and inspection.
• Chemical Adhesion reduces the need for expensive &
time consuming concrete fasteners.
• Versatile Performer for a wide range of complex applications.
Part Wt. (lbs.)
No. Description Each
SSM106 Mortar 6 gal. Pail 22
SSM228 Mortar Bag 22
Series WF300 Intumescent Firestop Caulk
A latex based, high solids, single stage
intumescent firestop caulk. This mate-
rial, when properly installed, effective-
ly seals penetration openings in wood
frame construction against the spread
of fire, smoke and combustion by-
products. When exposed to elevated
temperatures, WF300 expands rapidly
to seal off voids left by the burning
or melting of combustible materials.
Storage stable and will not separate
or shrink when dried. Adheres te-
naciously to common construction
materials such as lumber and gypsum
board as well as typical penetrant
materials, peneetrations and gaps in
fire resistance rated wood.
Applications
• Through-penetrations and gaps in
fire resistance rated wood frame
construction such as floors/csilings,
wallls and/or partitions
.
Part Case Wt. (lbs.)
No. Description Qty. Each
WF310 Wood Frame Caulk 10.1 oz. Tube 12 0.94
WF305 Wood Frame Caulk 5 gal. Pail 1 58.00
WF320 Wood Frame Caulk 20 oz. Sausage 12 1.92
Features & Benefits:
• Red color for easy identification.
• Waterbased for easy cleanup.
• UL Classified for 1 or 2 hours.
• Intumescent: Expands up to 5X.
• Adheres to Common Building
Materials
• Tested to ASTM E 814.
498 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
A bolt-in solution for riser applications that brings the safety and simplicity of
EZ-Path® to your vertical cable installations. The EZ-Path® Modular Floor Grid
System can handle literally thousands of cables.
Modular Floor Grid Systems utilize the high volume, EZ-Path® 44 Series Path-
ways installed in banks of four to provide your cabling systems with room to
grow. Sturdy steel grids mount one, two or four banks or pathways in built-in
slots for a total of up to sixteen pathways through a single floor opening. A
single bank Floor Grid comes complete with pathways. Multi-bank Modular
Floor Grids are installed with firestop panels sealing each slot. As additional
cable capacity is required, firestop panels are removed and pathway modules
containing four pathways are installed in each slot.
FIRESTOPPING - STI
Cable Firestopping System
The World’s Most Advanced Cable Firestopping System
No Firestopping Required
• Built-in firestopping system auto-
matically adjusts to the number of
cables installed.
• Design assures it is firestopped at
all stages of use.
• Mechanical application eliminates
the use of sealant, putty and other
products that need to be removed
and replaced.
Fire & Smoke Protection
• Maximum resistance to fire and
smoke whether empty or 100%
visually filled.
• Assures fire & smoke protection with
every new or retrofit cable installation.
• Superior fire & smoke leakage vs.
standard sleeve & putty systems.
• Unlike conventional sleeve & putty
system, EZ-Path® remains fire &
smoke compliant 100% of the time!
Fast Acting Intumescence
• Engineered for rapid expansion when
exposed to fire or high temperatures.
• Intumescent material responds to
flames or heat by quickly sealing
the pathway and preventing the
passage of flames and smoke.
• Innovative built-in firestop de-
sign assures it is firestopped and
smoke-sealed — even at maximum
cable loading.
• 100% Protected empty or full!
• Automatically adjusts to cable fill
• Organizes & manages cables
• Adapts to virtually any condition
• Group for increased capacity
• Wide range of accessories
Save Time & Money
With the EZ-Path® System, firestop-
ping is a one-time event! No sealant,
putty, or foam pads to remove and
replace. Nothing to adjust. Nothing to
loosen and re-tighten!
Cable Management?
The EZ-Path® System allows cable
installations to be easily organized
by type, use, or trade... Pathways
installed in walls or floors provide
managed portals through which cables
can easily be routed. Install just one
pathway or gang as required for
additional capacity or better cable
organization.
The Zero-Maintenance Solution for Firestopping Cables!
Series 44 Modular Floor Grid System
An EZ-Path® Solution for High Volume Cable Penetrations through Floors
UL® Classified & FM Approved in
accordance with ASTM E814 (UL1479)
499
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Series 22
Designed for new or existing cable
installations through walls (only) up to 9"
thick.Holds up to 24 CAT 5E cables. Can
be mounted as a single unit in either a 2"
round or a 1.5" square opening. Sold as
a complete kit only. Includes pathway,
wall plates, gaskets, labels, required set
screws and allen key. No additional ac-
cessories are required.
Series 33
Designed for new or existing cable in-
stallations through up to 9" thick walls,
or floors. Extensions are available for
installation in thicker barriers. Holds up
to 120 CAT 5E cables. Can be ganged
for additional capacity. Available in
semi-custom colors. A wide variety of
accessories easily adapt to a broad
range of applications.
Series 44
Designed for new or existing cable
installations through up to 10" thick
walls, or floors. Holds up to 240 CAT 5E
cables. Pathways can be ganged for ad-
ditional capacity. Additional accessories
easily adapt 44 Series Pathways to a
broad range of applications.
FIRESTOPPING - STI
Cable Firestopping Pathways, Installation
Options and Accessories
EZ-Path® Fire-Rated Pathway Devices & Kits
Part No. Description Case Qty.
EZD22 Series 22 Fire-Rated Pathway Kit 6
EZD33FWS Series 33 Fire-Rated Pathway Device 6
EZDP33FWS Series 33 Square Kit - Device with square wall plate pack 4
EZDP133CWK Series 33 Circular Kit - Device with circular wall plate pack 1
EZDP33WR Series 33 Retro-Fit Kit - Device with retro-fit wall plate pack 1
EZDP133FK Series 33 Kick in Kit - Device with kick-in plate pack 1
EZDP233GK Series 33 Two-Gang Kit - Two (2) Devices with two-gang plate pack 1
EZDP333GK Series 33 Three-Gang Kit - Three (3) Devices with three-gang plate pack 1
EZDP433GK Series 33 Four-Gang Kit - Four (4) Devices with four-gang plate pack 1
EZDP433GK-C Series 33 Color Coded Four-Gang Kit
Four (4) Devices ( 1-orange, 1-blue, 1-yellow, 1-white) with four-gang plate pack 1
EZDP733GK Series 33 Seven-Gang Kit - Seven (7) Devices with seven-gang plate pack 1
EZDP133CAK Series 33 Conduit Attachment Kit-Device with conduit attachment plate pack 1
EZD44 Series 44 Fire-Rated Pathway Device 4
EZDP44 Series 44 Fire-Rated Pathway Kit - Device with single wall plate pack 1
EZDP144FK Series 44 Floor Kit - Device with floor plate pack 1
EZDG444 Series 44 Single Bank Floor Grid - Four (4) Devices with floor frame 1
EZD444MB Series 44 Single Bank of Devices - Four (4) Devices with hanger bracket 1
EZ-Path® Accessories and Plate Packs
Part No. Description Case Qty.
EZP133W Series 33 - Single Square Wall Plate Pack 1
EZP133CW Series 33 - Circular Wall Plate Pack 1
EZP233W Series 33 - Double Wall Plate Pack 1
EZP333W Series 33 - Triple Wall Plate Pack 1
EZP433W Series 33 - Four-Gang Plate Pack 1
EZP733W Series 33 - Seven-Gang Plate Pack 1
EZP133PC Series 33 - One Pair (2) Positioning Clamps 1
EZP133K Series 33 - Single Kick-In Plate Pack - (For use with floor applications) 6
EZP133R Series 33 - Retro-Fit Mounting Plate Pack 1
EZP133CA Series 33 - Conduit Attachment Plate Pack 1
RCM33 Series 33 - One Pair (2) Radius Control Modules 1
EZD33E Series 33 - Extension Module 1
EZP144W Series 44 - Single Wall Plate Pack 1
EZP544W Series 44 - Multi-Gang Wall Plate Pack 1
EZP144F Series 44 - Split Floor Plate Pack 1
EZG844 Series 44 - Multi-Slot Frame for Eight (8) Pathways 1
EZG1644 Series 44 - Multi-Slot Frame for Sixteen (16) Pathways 1
500 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FIRESTOPPING - GRACE
FS900+ Sealant
Elastomeric Firestop
FlameSafe® FS 1900 is a
high-performance, elastomer-
ic and intumescent sealant.
A high-solids, water-based
compound engineered to
provide exceptional adhesive
and elastomeric properties
for the demanding firestop
requirements of pipe, cable,
sprinkler penetrations and
construction joints in environ-
ments subjected to frequent
expansion and contraction.
Does not contain solvents, is
not toxic and cannot damage
plastic pipes or cable jackets.
Features & Benefits:
• Underwriters Laboratories classified and Factory
Mutual approved
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814), UL 2079 (ASTM
E1966 and E1399), UL 723 (ASTM E84)
• Sound transmission tested in accordance with ASTM
E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion to a variety of
• substrates and penetrants
• No solvents, silicones or outgassing
• Elastomeric
FS1900 Sealant
Intumescent Elastomeric Firestop
Applications
• Metallic and Non-metallic pipe, cable, conduit, cable
tray and duct penetrations through typical wall and floor
construction.
• Joints between fire-resistive assemblies (such as wall-to-
wall, floor-to-floor and head of wall), concrete, masonry,
fluted deck and gypsum substrates, wood joist
• floor-to-ceiling and chase wall assemblies.
• Particularly suited for use where system vibration and
building movement are concerns
FlameSafe® FS 900+ Sealant
is cost-effective, water-based
and cures to form a flexible
shield against the spread of
fire and smoke. Available in
two grades: caulkable/trowel-
able (CG) and self-leveling
(SL). Contain no solvents, is
not toxic and will not damage
plastic pipes or cable jackets.
Features & Benefits:
• Underwriters Laborato-
ries classified and Factory
Mutual approved
• Firestop systems listed for through penetration and
joint systems
• Listed in systems with up to 4 hour fire rating
• Tested to UL 1479 (ASTM E814), UL 2079 (ASTM
E1966 and E1399), UL 723 (ASTM E84)
• Sound transmission tested in accordance with ASTM
E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion to a variety of
• substrates and penetrants
• No solvents, silicones or outgassing
• Elastomeric
• Self-leveling grades
Part No. Description Pkg
66831 Caulk Tube, 10.3 oz., Red 12
66833 Caulk Tube, 31 oz., Red 6
66853 Caulk Tube, 31 oz., Gray 6
66832 Sausage Pack, 20.2 oz., Red 12
66852 Sausage Pack, 20.2 oz., Gray 12
66835 Poly Pail, Caukable/Trowelable, 5 gal. Red 1
66855 Poly Pail, Caukable/Trowelable, 5 gal. Gray 1
66836 Poly Pail, Self-Leveling, 5 gal. Red 1
Applications
• Metallic and Nonmetallic pipes, conduits & tubing.
• Electrical & electronic cabling.
• HVAC penetrations.
• Concrete floor-to-floor, floor-to-wall and wall-to-wall.
• Concrete, CMU and gypsum head of wall applications
requiring dynamic joint movement.
Part No. Description Pkg
66811 Caulk Tube, 10.3 oz. 12
66813 Caulk Tube, 31 oz. 6
66812 Sausage Pack, 20.2 oz. 12
66814 Poly Pail,1 gal. 1
66815 Poly Pail, 5 gal. 1
Accessories
Part No. Description Pkg
CG 1 Caulk gun, 10.3 oz tubes 1
CG 2 Caulk Gun, 1 quart 1
BEST SELLING
PRODUCTS
HI-LITED
501
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FIRESTOPPING - GRACE
FS3000 Spray
Spray-able Elastomeric Firestop
FlameSafe® FS 3000 Spray is a water-based, elastomeric
firestop that is designed for spray applications onto joints
between fire-resistive assemblies and perimeter barrier (cur-
tain wall) assemblies. Cures to a strong, flexible seal. Tested
to dynamic movement conditions in accordance with ASTM
E1399 relating to seismic, wind sway and thermal expansion/
contraction environments. Specifically formulated for ease of
application and provides an efficient solution for firestopping
joint systems.
Features & Benefits:
• Underwriters Laboratories classified and Factory
Mutual approved
• Firestop systems listed for through penetration and
joint systems
• Listed in systems with up to 4 hour fire rating
• Tested to ASTM E1399, ASTM E1966 (UL 2079),
ASTM E814 (UL 1479)
• Sound transmission tested in accordance with ASTM E90
• Water-based, easy to apply, use and clean up
• Excellent adhesion and thickness build
• Head of Wall approvals over
• Monokote® MK-6
• Elastomeric
• Sprayable and Brushable
• No Silicones or out-gassing.
Part No. Description Pkg
66871 Poly Pail, 5 gal. Red 1
66872 Poly Pail, 5 gal. White 1
Applications
• FlameSafe FS 3000 has been tested for use in perim-
eter barrier (curtain wall) construction and head of
wall applications.
FlameSafe® Mortar
Seal is a cost-
effective mate-
rial available for
projects with many
large openings. A
lightweight, low
density product
that is mixed with
water for pouring,
pumping or troweling into the cavity. Mortar Seal is paintable
with alkali-resistant paint. It does not shrink, assuring a smoke-
tight seal when cured. It has a zero flame spread and does not
contain solvents or silicones.
Features & Benefits:
• Underwriters Laboratories classified
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814)
• Lightweight, low density
• Non-shrinking
• Nontoxic
• Economical
• Noncombustible, non-halogenated
• No solvents
• No outgassing
• Pourable, pump-able
Mortar
Smoke & Gas-Tight Seal
Applications
• Particularly suited for large openings with multiple
metallic or cable penetrations.
• Can be used alone for most noncombustible pen-
etrants such as steel, copper and cast iron pipe
through the most common types of masonry construc-
tion, poured concrete floors and walls, and concrete
block walls.
• Can be used in conjunction with other FlameSafe
products for large openings where combustible
penetrants like plasticor insulated pipe require an
intumescent product.
Part No. Description
66901 FSM Bag, 22 lbs.
66902 FSM Poly Pail, 22 lbs.
Mineral Wool
Part No. Description
MW 1 Mineral Wool, 1 lb.. bag
MW 24 Mineral Wool Batts, 2' x 4' x 2'
502 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FIRESTOPPING - GRACE
FlameSafe® Pillows
are a durable
firestop product
allowing easy
access to cables
and cable trays for
through-penetra-
tion in fire-rated
floors and walls.
Easy to install,
firestop pillows al-
low for multiple re-entry. They function through a unique phase
reaction to intumesce and seal out fire and smoke. They are an
ideal alternative to firestop large openings and are approved
for multiple cable tray applications.
Features & Benefits:
• Underwriters Laboratories classified; Factory Mut
• Listed in systems with up to 3 hour fire rating
• Tested to UL 1479 (ASTM E814)
• Ideal for re-entry/retrot installations
• Excellent for large openings
• Quick and easy installation
• Temporary or permanent use
• Chemically inert/nontoxic
• Heat and fire reactive
Pillows
Removable, Reusable Firestop Seal
Applications
• Used as a firestop to maintain fire ratings up to 3
hours wherever penetration occurs through fire-rated
walls and floor assemblies.
• May be used during the construction phase as a tem-
porary firestop or left in place as a permanent
• firestop.
• Tested in systems for 1 and 2 hour gypsum wallboard
and 2 and 3 hour concrete wall and floor assemblies.
• Cost effective solution for firestopping power cables
and data/telecommunications cable which require
retrofit.
Part No. Description
66891 FSPIL1 Pillow, 6" x 9" x 1"
66892 FSPIL2 Pillow 6" x 9" x 2"
66894 FSPIL4 Pillow 6" x 9" x 4"
FlameSafe® Bags
allow easy access
to cables, cable
trays and metallic
pipes for through
penetrations in
fire-rated floors
and walls. The
bags are filled with
a combination of
mineral fibers,
incombustible components, intumescent agents and special
fire-retardant additives. Resistive to the environment and are
effective when subjected to weather, temperature and atmo-
spheric conditions. Unlike plastic covered pillows, FlameSafe
Bags are sealed in a durable, fiberglass mesh bag, effectively
encasing the loose fill material. FlameSafe Bags allow for mul-
tiple re-entry.
Features & Benefits:
• Underwriters Laboratories classified and Factory
Mutual approved
• Listed in systems with up to 3 hour fire rating
• Listed without wire mesh for concrete or gypsum wall-
board
• Ideal for re-entry/retrofit, including telecommunica-
tions and computer applications
• Water and weather resistant
• Chemically inert and nontoxic
• Quick and easy installation
• Temporary or permanent use
• Field proven, durable construction
Bags
Expandable, Through-Penetration Firestop
Applications
• FlameSafe Bags are used as a firestop wherever pen-
etration occurs through walls or floors to maintain fire
ratings up to 3 hours.
• They may be used during the construction phase as a tem-
porary firestop or left in place as a permanent firestop.
• Ideal for applications where frequent retrofitting of
cables is expected, such as raised floors in telecom-
munication sites and computer rooms.
• Bags are approved for aluminum/steel cable trays,
fiber optic cables, telecom cables, power cables, steel
conduit and electrical wiring.
• Can be used in such substrates as masonry or gypsum
wallboard
Part No. Description
66896 FSB 50 Bag, 0.5" x 7" x 13.5"
66897 FSB 75 Bag, 0.75" x 7" x 13.5"
66898 FSB150 Bag, 1.5" x 7" x 13.5"
28943 WP35/65 Insertion Plates, 1 pr each,
6" x 14" x or 3.5" x 14"
Be sure to visit
www.GoNefco.com
for the latest Firestopping
Products
503
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADWELD® GROUNDING SYSTEMS
CADWELD PLUS
The Cadweld Process
CADWELD connections are the accepted method of
attaching Cathodic Protection leads to pipes (steel or
cast iron), tanks and structures.
CADWELD connections weld the conductors and
the structure to be protected so no galvanic corrosion
can occur at the interface. The process is specifically for-
mulated to provide minimum heat effect on steel, which
is especially important on thin-wall, high-stress pipes.
CADWELD connections are also used for header cable
taps, conductor splices and terminations, and ground
rod connections.
Cadweld FACTS
A CADWELD Connection . . .
• Has current carrying capacity equal to that of
the conductor.
• Is permanent with a low resistance connection
that cannot loosen or corrode.
• Uses lightweight, inexpensive equipment.
• Requires no external source of power or heat.
• Requires no special skills.
• Can be easily checked for quality.
CADWELD connections are made with a semi-permanent graphite mold, which holds the conductors to be welded. Weld
metal (a mixture of copper oxide and aluminum) is dumped into the top of the mold. The mold is covered and the weld metal
ignited. The exothermic reaction produces molten copper, which results in a permanent, high conductivity connection.
504 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CADWELD® GROUNDING SYSTEMS
Connections
Type TA - Horizontal
Tee Connections
Type PT - Parrallel
Horizontal Tee
Connections
Type SS - Horizontal
Splice Connections
Type GR - Cable
to Ground Rod
Connections
Type XA - Horizontal
Splice Connections
Type LA - Cable to Lug
Connections
Type GT - Through
Cable to To Top
of Ground Bar
Connections
Type VS - Cable
to Vertical Steel
Connections
Type HS - Cable
to Horizontal Steel
Connections
Type HA - Cable
to Horizontal Steel
Connections
Cadweld Graphite Molds
A semi-permanent graphite
mold used for making Cadweld
connections. The mold con-
trols the direction and speed
of of the molten Cadweld weld
metal flow and it'sfinal shape.
Cadweld graphite molds last
for an average of 50 or more
connections under normal
usage. The connections listed
here are only some of the
hundreds of possible connec-
tions available. Call for a FREE
Cadweld Catalog
Installation Is Easy!
4 Simple Steps For Permanently Welded Electrical
Connections: 2
1
4
Insert CADWELD PLUS package
into mold (may require use of a
cover/baffle)
Attach control unit termination
clip to ignition strip
Press and hold control unit
switch and wait for the ignition
Open the mold and remove the
expended steel cup – no special
disposal required
Proven Safety and
Proven Performance
with No Equal
3
Plus System
The ultimate welded connection that will never loosen,
corrode or increase in resistance just got BETTER:
• Consists of a tamper proof, disposable, moisture-resis-
tant weld metal cup. The weld metal, disk and ignition
source are incorporated into the self-contained package.
• Virtually unlimited shelf life.
• Completes welds at distances of up to 6 ft/1.8 meters
(up to 15 ft/4.6 meters with optional lead)
• Requires minimum components – no starting material, no
disks, no flint igniters
• Easy to handle, store and transport – by air, land or sea
in unlimited quantities
• Reduces installation time by 20%
• Has color-coded weld metal containers – by size and al-
loy type – for easy identification
• Has electronic ignition with a CE/UL battery powered
controller box that is designed for 600 connections with
one set of 8 standard AA batteries (included) – requiring
no special batteries or chargers
• Designed for use in standard CADWELD® molds including
CADWELD® MULTI
505
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CADWELD® GROUNDING SYSTEMS
Materials, Tools & Accessories
Cadweld PLUS Weld Metal
Color Coded Containers
Simplifies the method of making exothermic
connections by eliminating the need for starting
material or a separate disk. With the CADWELD
PLUS Control Unit, welds can be completed up
to 6 feet away. Each CADWELD PLUS package
is color coded for easy identification.
Traditional Cadweld PLUS Std.
Weld Metal Weld Metal Color Pkg.
15 15PLUSF20 Black 20
25 25PLUSF20 Red 20
32 32PLUSF20 White 20
45 45PLUSF20 Light Blue 20
65 65PLUSF20 Dark Green 20
90 90PLUSF20 Gray 10
115 115PLUSF20 Orange 10
150 150PLUSF20 Dark Blue 10
200 200PLUSF20 Yellow 10
250 250PLUSF20 Purple 10
use 2 x 150 300PLUSPLUSF20 Light Green 10
use 2 x 200 400PLUSF20 Brown 10
500 500PLUSF20 Light Brown 10
Cadweld Weld Metal - Traditional
F20 Alloy for Copper to Copper and
Copper to Steel (incl. Disks)
Welding material consists of copper oxide and
aluminum, packaged by weight (in grams) in
plastic tubes. Each tube contains starting mate-
rial at the bottom of the plastic tube. Welding
material is packaged in containers along with
metal disks. Standard welding material (F20) is packaged in tubes with clear
caps and is used for all grounding connections with the exception of those to
cast iron or rail.
L160
Handle Clamps
(inl. T320)
T313
Card Cleaning
Brush
T314
Cable Cleaning
Brush
T321
Rasp
T394
Mold Cleaning
Brush
T403
Mold Sealer
T320
Flint Ignitor
PLUSCU
Cadweld PLUS
Control Unit
L111
Surefire Torch
Head
B160V
Chain Support
Clamp
B396
Magnetic Handle
Clamp
B265
Cable Clamp
For proper grounding and bonding of sensi-
tive electronic systems, such as computer
and telecommunications installations, all
frequencies must be considered, from DC
to over 500MHz.
The ERITECH Signal Reference Grid is a low
impedance network of conductors which
establish an equipotential plane for high
frequency, low voltage digital signals
Pre-Engineered Wire Mesh and Mats
Convenient, efficient way to improve grounding
in high voltage installations and where large area
grounds are required.
Signal Reference Grid
Cadweld Catalog
Call Today for complete catalog and listings of ALL
Cadweld Products - Contact your Sales Associate
506 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
6 x 6 6-3/8 x 6/3/8 1 2.0
8 x 8 8-3/8 x 8-3/8 1 2.7
8 x 12 8-3/8 x 12-3/8 1 3.6
10 x 10 10-3/8 x 10-3/8 1 3.6
12 x 12 12-3/8 x 12-3/8 1 4.7
12 x 16 12-3/8 x 16-3/8 2 6.0
12 x 18 12-3/8 x 18-3/8 2 7.0
12 x 24 12-3/8 x 24-3/8 2 8.5
14 x 14 14-3/8 x 14-3/8 1 6.2
16 x16 16-3/8 x 16-3/8 2 7.6
16 x 24 16-3/8 x 16-3/8 2 12.5
Non-Rated Flush Access Doors
UF-5000 Universal / Prime Coated and Stainless Steel
A universal flush access door for walls and ceilings. Designed for installation in drywall,
plaster, masonry, tile or any flush surface. Door panel features rounded safety corners, for an
architecturally pleasing appearance. The one-piece trim flange will not rack, sag for distort while
the continuous concealed hinge will not bind or corrode. For easy installation, the mounting frame
is 1-1/4” deep, giving maximum clearance behind the door frame.
Specifications
Material: 16" x 16" and smaller: 16 gauge door, 18 gauge mounting frame
Over 16" x 16": 14 gauge door, 16 gauge mounting frame
Door: Flush to frame - rounded safety corners
Frame: One piece outer flange welded to mounting frame
Hinge: Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel
Stainless Steel: Type 304- No. 4 satin polish
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
18 x 18 18-3/8 x 18-3/8 2 11.2
18 x 24 18-3/8 x 24-3/8 2 15
22 x 22 22-3/8 x 22-3/8 4 16.3
22 x 30 22-3/8 x 30-3/8 5 21
22 x 36 22-3/8 x 36-3/8 5 26
24 x 24 24-3/8 x 24-3/8 4 18
24 x 30 24-3/8 x 30-3/8 5 22.5
24 x 36 24-3/8 x 36-3/8 5 26.6
24 x 48 24-3/8 x 48-3/8 5 38
30 x 30 30-3/8 x 30-3/8 5 27.5
36 x 36 36-3/8 x 36-3/8 5 39
DW-5040 Drywall / Prime Coated Stainless Steel
Designed specifically for installation in drywall walls & ceilings after drywall has been installed.
The flange of the door is a textured galvanized steel taping bead with pre-punched holes. Drywall
compound is applied over the beading at the same time the drywall joints are finished. When the
application is completed, only the door panel remains exposed. Concealed hinge & screwdriver
operated cam latches allow the door panel to operate freely with no binding, sagging or distortion.
Specifications
Material: 14 gauge door, 14 gauge mounting frame
Door: Flush to edge of frame
Frame: Galvanized steel drywall taping bead on all sides
Hinge: Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel
Stainless Steel: No. 4 satin polish
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
6 x 6 6-3/8 x 6/3/8 1 3
8 x 8 8-3/8 x 8-3/8 1 3.5
10 x 10 10-3/8 x 10-3/8 1 4.5
12 x 12 12-3/8 x 12-3/8 1 6
14 x 14 14-3/8 x 14-3/8 1 7.5
16 x16 16-3/8 x 16-3/8 2 9.5
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
18 x 18 18-3/8 x 18-3/8 2 11.5
22 x 22 22-3/8 x 22-3/8 4 15
24 x 24 24-3/8 x 24-3/8 4 19
24 x 36 24-3/8 x 36-3/8 5 28
30 x 30 30-3/8 x 30-3/8 5 27.5
36 x 36 36-3/8 x 36-3/8 5 39
507
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
Non-Rated Flush Access Doors
PS-5030 Plaster / Prime Coated and Stainless Steel
Designed for installation in plaster walls and ceilings, before the plaster is applied. An expansion
casing bead with 3" wide galvanized lath, included as part of the frame, provides a clean, tight finish
between the frame and plaster and also adds reinforcement. The door panel is finished flush with
the plaster. Concealed hinge and screwdriver operated cam latches allow the door panel to operate
freely with no binding, sagging or distortion.
Specifications
Material: 14 gauge door, 14 gauage mounting frame
Door: Flush to edge of frame
Frame: Galvanized steel drywall taping bead on all sides
Hinge: Continuous, concealed
Latch: Stainless steel screwdriver operated cam latch. Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
6 x 6 6-3/8 x 6/3/8 1 3
8 x 8 8-3/8 x 8-3/8 1 3.5
10 x 10 10-3/8 x 10-3/8 1 4.5
12 x 12 12-3/8 x 12-3/8 1 6
14 x 14 14-3/8 x 14-3/8 1 7.5
16 x16 16-3/8 x 16-3/8 2 9.5
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
18 x 18 18-3/8 x 18-3/8 2 11.5
22 x 22 22-3/8 x 22-3/8 4 15
24 x 24 24-3/8 x 24-3/8 4 19
24 x 36 24-3/8 x 36-3/8 5 28
30 x 30 30-3/8 x 30-3/8 5 27.5
36 x 36 36-3/8 x 36-3/8 5 39
Non-Rated Recessed Access Doors
AT-5020 / Prime Coated Steel
Designed for flush installation in walls or ceilings when it is required to conceal the door panel, which
is recessed 1".
Specifications
Material: 16 gauge door
Door: Recessed 1"
Frame: 14 gauge
Hinge: Concealed, pivoting rod type
Latch: Flush to surface, screwdriver operated cam latch. Also available: cylinder lock and
key, allen head cam latch, spanner head cam latch
Finish: Steel: 5 stage iron phosphate preparation with prime coat of grey baked enamel.
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
12 x 12 12-3/8 x 12-3/8 1 7
18 x 18 18-3/8 x 18-3/8 2 13
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
24 x 24 24-3/8 x 24-3/8 2 21
24 x 36 24-3/8 x 36-3/8 4 30
Special Sized Access Doors are AVAILABLE. Please call with your
requirements for a customized quote tailored to your specifications!
All doors are available in Stainless Steel
TURN TO THE FOLLOWING PAGES MORE ACCESS DOORS...
508 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
DW-5015 Drywall / Prime Coated Steel
Designed for flush installation in
drywall surfaces when it is required
to conceal the door panel, which
is recessed 1" to receive drywall.
The flange of the door is a textured
galvanized steel taping bead with pre-
punched holes. Drywall compound is
applied over the beading at the same
time the drywall joints are finished.
Specifications
Material: 16 gauge door, 14 gauge mounting frame
Door: Recessed 1"
Frame: Galvanized steel drywall taping bead on all sides
Hinge: Concealed, pivoting rod type
Latch: Flush to surface, screwdriver operated cam latch
Also available: cylinder lock and key, allen head
cam latch, spanner head cam latch
Finish: 5 stage iron phosphate preparation with prime
coat of grey baked enamel.
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
12 x 12 12-3/8 x 12-3/8 1 8.5
18 x 18 18-3/8 x 18-3/8 2 15
24 x 24 24-3/8 x 24-3/8 2 23
24 x 36 24-3/8 x 36-3/8 4 30
Non-Rated Recessed Access Doors
AP-5010 Plaster / Prime Coated Steel
Designed for use in acoustical plaster
walls and ceilings. The door is recessed
5/8" and is lined with self-furring lath.
An expansion casing bead with 3"
wide galvanized lath, included as part
of the frame, provides a clean, tight
finish between the frame and plaster
and also adds reinforcement.
Specifications
Material: 16 gauge door, 14 gauge mounting frame
Door: Recessed 5/8" and lined with self-furring
galvanized lath edges
Frame: Expansion casing bead with 3" wide galvanized
lath, recessed 3/4" to receive plaster
Hinge: Concealed, pivoting rod type
Latch: Flush to surface, screwdriver operated cam
latch. Also available: cylinder lock and key,
allen head cam latch, spanner head cam latch
Finish: 5 stage iron phosphate preparation with prime
coat of grey baked enamel.
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
12 x 12 12-3/8 x 12-3/8 1 8.5
18 x 18 18-3/8 x 18-3/8 2 15
24 x 24 24-3/8 x 24-3/8 2 23
24 x 36 24-3/8 x 36-3/8 4 30
Heavy-Duty Security Access Doors
SD-600 Heavy Duty Security Access Door
Designed for use in high security areas. Angle frame construction & 10 ga. plate door panel are ideal
for prisons, correctional facilities, housing projects etc. Standard security butt hinges are surface
welded to the door & frame. A detention type deadbolt lock with paracentric key is standard.
Specifications
Material: 10 gauge door, 2"x2"x3/16" angle frame
Door: 10 gauge plate, flush to edge of frame
Frame: Flange to be 2" wide, mounting frame to have anchor straps
Hinge: Heavy duty butt hinges, welded to door & frame
Latch: Detention type deadbolt lock with paracentric key. Also available: tamperproof
security cam latches, cylinder lock and key. When master keying is required, doors
can be prepared for rim cylinder locks
Finish: Steel: 5-stage iron phosphate preparation with prime coat of gray baked enamel.
Stainless Steel: #4 Satin Polish
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
12 x 12 12-3/8 x 12-3/8 1 22
16 x16 16-3/8 x 16-3/8 1 30
18 x 18 18-3/8 x 18-3/8 1 46
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
24 x 24 24-3/8 x 24-3/8 1 70
24 x 36 24-3/8 x 36-3/8 1 90
36 x 36 36-3/8 x 36-3/8 1 120
509
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
Fire-Rated Access Doors
FW-5050 Walls & Ceilings / Prime Coated or Stainless Steel
Approved for use in walls and ceilings. For walls, door has a Underwriters Laboratories (UL and ULC),
1-1/2 hour "B" label, with a maximum temperature rise of 250° after 30 minutes. For use in walls when
temperature rise or heat transmission is a factor. For fire rated ceilings, door has been approved by
Warnock Hersey International for 3 hours (max. size to 24" X 36"). Available with a galvanized steel
drywall taping bead flange, (FW-5050-DW) for drywall applications,
Fire Rating
Walls: UL/ULC 1-1/2 hour "B" label with 250 degree temperature rise
Ceilings: Warnock Hersey International - 3 hours
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
8 x 8 8-3/8 x 8-3/8 1 8
10 x 10 10-3/8 x 10-3/8 1 9
12 x 12 12-3/8 x 12-3/8 1 10
14 x 14 14-3/8 x 14-3/8 1 12
16 x16 16-3/8 x 16-3/8 1 15
18 x 18 18-3/8 x 18-3/8 1 20
22 x 30 22-3/8 x 30-3/8 1 32
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
22 x 36 22-3/8 x 36-3/8 2 35
24 x 24 24-3/8 x 24-3/8 1 28
24 x 36 24-3/8 x 36-3/8 2 38
24 x 48 24-3/8 x 48-3/8 2 48
30 x 30 30-3/8 x 30-3/8 2 38
36 x 36 36-3/8 x 36-3/8 2 54
36 x 48 36-3/8 x 48-3/8 2 76
FW-5060 Walls / Prime Coated or Stainless Steel
Approved by Underwriters Laboratories (UL) for 1-1/2 hours "B" label in walls and ULC for 2 hours
"B" label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, this door should be
used when necessary to provide access in fire rated walls, when temperature rise is not a factor.
Available with galvanized steel drywall taping bead flange, (FB-5060-DW) for drywall applications.
Fire Rating
Walls: UL - 1-1/2 hour "B" label. ULC - 2 hour "B" label. (optional)
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
8 x 8 8-3/8 x 8-3/8 1 5.5
10 x 10 10-3/8 x 10-3/8 1 6.7
12 x 12 12-3/8 x 12-3/8 1 8.3
14 x 14 14-3/8 x 14-3/8 1 9.5
16 x16 16-3/8 x 16-3/8 1 11.5
18 x 18 18-3/8 x 18-3/8 1 14.3
22 x 30 22-3/8 x 30-3/8 1 32.5
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
22 x 36 22-3/8 x 36-3/8 2 28
24 x 24 24-3/8 x 24-3/8 1 20.3
24 x 36 24-3/8 x 36-3/8 2 28.5
24 x 48 24-3/8 x 48-3/8 2 34
30 x 30 30-3/8 x 30-3/8 2 28.5
36 x 36 36-3/8 x 36-3/8 2 38
36 x 48 36-3/8 x 48-3/8 2 47.5
Specifications
Material: 20 gauge door, 16 gauge mounting frame
Door: Filled with 2" thick fire rated insulation
Frame: Flange to be 1" wide, mounting frame to have
anchor straps (optional)
Hinge: Concealed
Latch: Universal self-latching bolt, operated by either a
knurled knob or flush key. Doors can be prepared
for mortise cylinder locks for master keying
Finish: Steel: 5 stage iron phosphate preparation with
prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
Specifications
Material: 16 gauge door, 16 gauge mounting frame
Door: Flush to frame with reinforced edges
Frame: Flange to be 1" wide, mounting frame to have
anchor straps (optional)
Hinge: Concealed
Latch: Universal self-latching bolt, operated by either a
knurled knob or flush key. Doors can be prepared
for mortise cylinder locks for master keying
Finish: Steel: 5 stage iron phosphate preparation with
prime coat of grey baked enamel.
Stainless Steel: No. 4 satin polish
510 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
HD-5070 Hinged Duct &
CD-5080 Double- Cam Duct / Galvanized Steel
Designed to provide convenient, economical access to duct components. The
insulated door panel, along with the gasketing between the door and frame
assures a tight seal without obstruction in the air system. Available in either
hinged (HD-5070) or double cam (CD-5080) construction..
Duct Access Doors
Specifications
Door: 24 gauge galvanized steel, double panel
Frame: 24 gauge galvanized steel with 5/8" notched
knock over tabs
Hinge: Continuous aluminum piano hinge
Door Door panel filled with 2" fiberglass insulation
Insulation: (7.7 R factor), compressed into 1"
Door 1/8" thick by 1/2" wide closed cell neoprene
Gasketing: gasketing between door and frame
Latch: Self-tightening, hand operated cam latch.
Standard Sizes
Nominal Door Duct Wt. per
Size (in) W x H Opening (in) Door (lb)
6 x 6 6-3/4 x 6/3/4 1.25
8 x 8 8-3/4 x 8-3/4 1.75
10 x 10 10-3/4 x 10-3/4 2.75
12 x 12 12-3/4 x 12-3/4 3.75
14 x 14 14-3/4 x 14-3/4 4.75
16 x16 16-3/4 x 16-3/4 5.25
18 x 18 18-3/4 x 18-3/4 6.75
20 x 20 22-3/4 x 22-3/4 9
24 x 24 24-3/4 x 24-3/4 12
RD-5090 Round Duct / Galvanized Steel
Designed to provide convenient,
economical access to round ducts.
The pull and catch lock system,
along with the gasketing on the
door assures a tight seal without
obstruction in the air system.
The steel continuous piano hinge
provides for easy installation.
Specifications
Door: 16 gauge galvanized steel
Hinge: Continuous aluminum piano hinge
Door
Gasketing: 1/8” thick by 1” wide closed cell neoprene
Latch: Plated steel pull and catch.
Finish: Mill finish
Call With Duct Radius & Door Width To Order
HD-5070 CD-5080
Elgen Round Access Door
• Advanced Pre-Vessel Design
• More Effective Access Area
• No Frame to Install
• Stainless Steel and Aluminum
• 6" to 14" Packed 10/box
• 16" to 24" Packed 6/box
Stock Sizes
6" x 6" 16" x 16" 24" x 24"
8" x 8" 18" x 18" 16" x 12"
12" x 12" 20" x 20" 24" x 12"
14" x 14" 24" x 24"
Elgen Access Door Hardware Kits
#10 Ameriloc Latch
Access door latch is composed of Zamac #3, a
mixture of zinc and aluminum. Ideal for doors up to 4
sq. ft. Does not have an inside release lever. Supplied
with 2 Neoprene sponge gaskets to eliminate rattling
and air leakage. 1/4" dia. x 2-1/4" L
#15 Ameriloc Latch
Same as Ameriloc #10. The stud is long enough
to accommodate doors up to 2" thick. 3/8" dia
x 3-3/8" L
#20 Ameriloc Latch
Designed for walk-in doors. Operable from both
sides, accommodates doors up to 2" thick. Adjust-
able spacer for pan type doors included. Designed
for strength and practicality. 1/2" dia. x 4" L
#20-L Ameriloc Latch
Same as Ameriloc #20 with longer latch. 1/2"
dia. x 6" L
#30 Ameriloc Latch
Latch with inside release handle is a heavy duty unit combining 7" front
lever operating against a wedge typed door pull. 1/2" dia. x 6-1/2"
511
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FT Series Recessed Floor Doors
Designed for interior and exterior
applications that require an access
opening that will blend in with the
surrounding floor material. Available
hinged or non-hinged (to keep the
floor material from cracking or
chipping within the door panel, the securing screws are
located in the flange of the mounting frame). Available
recessed 1/8" or 1" to accommodate carpeting and vinyl,
ceramic, terrazzo tile and concrete.
FD /FT Series Non-Hinged Floor Doors
FD Series aluminum floor doors are
designed for interior and exterior
applications where watertightness is
required. The flush diamond plate door
panel stays secured to the frame with
flat head screws and is completely
removable.
FA Series Angle Frame Floor Doors
FA series aluminum floor doors are
designed for interior and exterior
applications where watertightness
is not required. The angle frame
construction with integral anchor
flange is designed to be cast into
concrete. The diamond plate door panel is equipped with
a flush aluminum drop handle and an automatic hold open
arm with red vinyl grip. Various loading capacities.
FC Series Channel Frame Floor Doors
FC Series aluminum floor doors are designed for interior
and exterior applications where
watertightness is required. The channel
frame construction with 1 1/2" drainage
coupling and integral anchor flange is
designed to be cast into concrete. The
diamond plate door panel is equipped
with a flush aluminum drop handle and
an automatic hold open arm with red
vinyl grip. Various loading capacities.
PA-3000 Plastic
Designed to provide easy access
to walls and ceilings. The high
impact styrene plastic with U.V.
stabilizers will not fade or corrode.
The door is completely removable
from the frame and fits tightly with
snap latches. The white finish, with
textured exposed surfaces, can be
left as is or painted to match the
surrounding areas.
Specifications
Material: 1/8" high impact styrene plastic with U.V.
stabilizers
Door: Flush to frame - rounded safety corners
Frame: One piece outside flange with 3/4" deep
mounting frame
Hinge: Concealed, pivoting rod type
Latch: Snap latches allow door to fit tightly within
frame
Finish: White, with textured exposed surfaces
Standard Sizes
Nominal Door Wall / Ceiling No. of Wt. per
Size (in) W x H Opening (in) Latches Door (lb)
4 x 6 4-3/8 x 6-3/8 1 1/2
6 x 9 6-3/8 x 9-3/8 2 1/.2
8 x 8 8-3/8 x 8-3/8 4 1
14 x 14 14-3/8 x 14-3/8 5 26.6
14 x 29 14-3/8 x 29-3/8 4 18
Plastic Access Doors
ACCESS DOORS
Roof Hatches
Designed to provide convenient,
economical access to the roof
of a building. Available in
prime coated galvanized steel
or aluminum. Roof Hatches are
designed with safety, durability
and ease of operation in mind.
Optional Accessories:
Safety Ladder Extension Tele-
scoping Safety Post Safety Rail-
ing System
Part No. Size Material Weight (lbs.)
G3232 24" X 24" GALVANIZED 125
G3242 36" X 24" GALVANIZED 135
G3844 36" X 30" GALVANIZED 155
G4444 36" X 36" GALVANIZED 170
G5656 48" X 48" GALVANIZED 185
G3862 30" X 54" GALVANIZED 225
G38104 30" X 96" GALVANIZED 335
A3232 24" X 24" ALUMINUM 60
A3242 36" X 24" ALUMINUM 70
A3844 36" X 30" ALUMINUM 85
A4444 36" X 36" ALUMINUM 95
A5656 48" X 48" ALUMINUM 115
A3862 30" X 54" ALUMINUM 135
A38104 30" X 96" ALUMINUM 245
Floor Doors
512 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
Access Doors
CENDREX designs and manufactures a full range of quality Access Doors, Roof Hatches,
Floor Hatches and Valve Boxes. Its philosophy of continuous improvement has enabled
CENDREX to become the most flexible and accommodating company in its field.
Line of Access Products
General Purpose
Access Doors
pgs. 514-515
Fire Rated
Access Doors
pgs. 516-518
Recessed
Access Doors
pg. 519
Security
Access Doors
pg. 520
Valve Boxes
pg. 520
Special Application
Access Doors
pg. 520
Roof Hatches
pg. 521
Floor Hatches
pg. 521
513
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
• Odd Size doors manufactured in 5 business days
Cendrex manufactures Odd Size access doors in 5 business days while industry
standards average 3 to 4 weeks.
• Custom access doors manufactured in 10 business days
Cendrex manufactures custom access doors in 5 to 10 business days while
industry standards average 4 to 5 weeks
Custom access doors: Double leaf doors, Louvered doors, Wire mesh doors,
Wider flange doors, choice of sizes and material (cold roll, aluminum,
stainless...)
• “CTR” Exclusive hidden flange door (avoids mudding)
Unmatched appearance (hidden flange);
Fast and easy installation;
No mudding and no taping saves 20 minutes versus door with corner beads.
• In stock at your NEFCO locations
For fast on-site shipment and pickup, ask your NEFCO representative for
information on standard size access doors currently in stock.
• LEED compliant
Complete documentation for all categories of LEED projects prepared by
professional accredited LEED specialists in accordance with the US Green
Building Council.
THE CENDREX ADVANTAGE
514 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
General Purpose Access Doors
AHD - FLUSH DOOR WITH 1’’ FLANGE FOR ALL SURFACE TYPES
The AHD is designed for a quick and easy installation on non-rated vertical and horizontal surfaces
made of drywall or any other type of material. Its rounded mitered corners, concealed pin hinge
and 1/4" return all around the door make it the safest and the sturdiest door on the market.
Specifications
Material: 16 gauge steel
Hinge:
Hidden pin hinge
Continuous piano type over 24" (H or W)
Lock / Latch: Screwdriver operated cam latch
Finish:
DuPont high quality grey polyester
powder coat finish
Packaging: Wrapped in individual boxes
AHD-GYP – FLUSH
DOOR WITH DRYWALL
BEAD FLANGE
AHD-PLY – FLUSH
DOOR WITH PLASTER
BEAD FLANGE
Options
Locks :
Cylinder lock and key, anti-theft screws,
Allen head hex lock, handle operated cam
latch, mortise preparation for cylinder
Material : Stainless steel 304 #4 (brushed finish)
Finish : White
Gasket: Neoprene gasket
AHD Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
6 x 6 1 2
8 x 8 1 3
8 x 12 1 4
10 x 10 1 4
12 x 12 1 5
14 x 14 1 6
12 x 16 1 6.2
12 x 18 1 7
12 x 24 1 7.5
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
16 x 16 1 8
18 x 18 1 9
18 x 24 1 13
20 x 20 1 11
22 x 22 1 14
*22 x 30 2 16.5
*22 x 36 2 18.9
Rough wall opening is door size +1/4”
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
24 x 24 1 15
*24 x 30 2 20
*24 x 36 2 21
*24 x 48 2 28
*30 x 30 4 22
*36 x 36 4 31
*Piano hinge on doors over 24"
(height or width)
515
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
Exclusive General Purpose Access Doors
CTR - EXCLUSIVE ACCESS DOOR WITH HIDDEN FLANGE FOR ALL SURFACE TYPES
The CTR is the newest generation of all purpose access doors. Easy to install, it will
blend in better than any other door on all non-rated surfaces. Its special European type
hinge allows the door, with its beveled edges, to close over the flange thus avoiding the
additional labor to mud or plaster over the flange.
Specifications
Material: 16 gauge steel
Hinge: Concealed, exclusive hinge design
Lock / Latch: Screwdriver operated cam latch
Finish:
Phosphate dipped steel with DuPont high
quality grey polyester powder coat finish
Packaging: Wrapped in individual boxes
Options
Locks :
Cylinder lock and key, anti-theft screws,
Allen head hex lock, handle operated cam
latch, mortise preparation for cylinder
Material : Stainless steel 304 #4 (brushed nish)
Finish : White
Gasket: Neoprene gasket
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
8 1/4 x 8 1/4 1 3
8 1/4 x 12 1 4
10 x 10 1 4
12 x 12 1 6
14 x 14 1 7
12 x 18 1 8
Rough wall opening is door size +1/4”
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
16 x 16 1 9
18 x 18 3 10
18 x 24 3 13
20 x 20 3 13
22 x 22 3 15
22 x 30 5 16.5
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
22 x 36 5 18.5
24 x 24 4 17
24 x 30 5 18
24 x 36 5 25
24 x 48 5 28.6
516 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
Fire Rated Access Doors
PFI – FIRE RATED INSULATED DOOR WITH 1’’ FLANGE FOR ALL SURFACES
The PFI is insulated with 2” thick mineral wool and can be used on fire rated walls,
ceilings and floors. It comes with a 1” flange for an easy flush installation on any type of
surface. By UL standards, once the installation is complete and the provided springs are
hooked to the back of the panel, the door will be self closing and self locking. The largest
fire rated PFI doors available for vertical and horizontal installations are respectively:
(48’’ x 48’’) and (24’’ x 36’’).
PFI-GYP – FIRE
RATED INSULATED
DOOR WITH
DRYWALL FLANGE
PFI-PLY – FIRE
RATED INSULATED
DOOR WITH
PLASTER FLANGE
PFI Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
8 x 8 1 7
10 x 10 1 8
12 x 12 1 10
14 x 14 1 12
16 x 16 1 14
18 x 18 1 17
22 x 22 1 20
22 x 30 1 30
22 x 36 2 34
24 x 24 1 24
24 x 36 2 36
Rough wall opening is door size +1/4”
Door Size
W x H (in)
* 24 x 48
* 30 x 30
* 32 x 32
* 36 x 36
* 48 x 48
*Sizes not
available for
ceiling rating
(max: 24 x 36)
Specifications
Material: 16 gauge steel frame and 20 gauge satin coated
steel door. Mineral wool insulation.
Hinge: Continuous piano hinge allows opening to 165°
Lock / Latch: Self latching tool-key and/or ring operated latch,
both included
Finish:
DuPont high quality grey polyester powder coat
finish
Packaging: Wrapped in individual boxes
Inside panel release and automac panel closer are standard on the PFI
Fire Rating:
2 hour fire barrier, 1½ hour B label, maximum temperature rise after
30 minutes 250° F, after 60 minutes 450° F. Warnock Hersey file #:
L-14031 for ceiling one (1) hour combustible rating and three (3) hour
non-combustible rating. MEA # 507-06-M.
517
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
PFN - FIRE RATED UNINSULATED DOOR FOR WALLS
The PFN is not insulated and can only be used on fire rated walls. It comes with a 1” flange
for an easy flush installation on any type of surface material. By UL standards, once the
installation is complete and the provided springs installed, this door will be self closing
and self locking. It should not be used in situations where protection against temperature
elevation is required. The largest fire rated PFN door available is: (36’’ x 36’’).
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Fire Rated Access Doors
PFN-GYP – FIRE RATED
UNINSULATED DOOR
FOR WALL WITH
DRYWALL FLANGE
PFN-PLY – FIRE RATED
UNINSULATED DOOR
FOR WALL WITH
PLASTER FLANGE
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
8 x 8 1 7
10 x 10 1 8
12 x 12 1 10
14 x 14 1 12
16 x 16 1 14
18 x 18 1 17
22 x 22 1 20
22 x 30 1 30
22 x 36 2 34
24 x 24 1 24
24 x 36 2 36
Rough wall opening is door size +1/4”
Door Size
W x H (in)
30 x 30
32 x 32
36 x 36
Specifications
Material: 16 gauge steel frame and 20 gauge satin coated
steel door.
Hinge: Continuous piano hinge allows opening to 165°
Lock / Latch: Self latching tool-key and/or ring operated latch,
both included
Finish:
DuPont high quality grey polyester powder coat
finish
Packaging: Wrapped in individual boxes
Fire Rating (for walls only):
2 hour fire barrier, 1½ hour B label, Warnock Hersey file #:
L-14031 in conformity with the following codes: UL10b, UL-555,
ASTM E152, NFPA 252 and ULC-S104. MEA # 507-06-M.
518 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
PFU - FIRE RATED INSULATED UPWARD OPENING DOOR FOR CEILINGS
The PFU is designed to be installed on fire rated ceilings only.
It can easily replace spring loaded models like the PFI. Its door,
which does not exceed 89 degrees of upward opening, falls
back by law of gravity into its locked position as required by fire
certification standards. It cuts down on installation time and
opening it becomes much easier with no spring load to deal
with. The largest fire rated PFU available is: (24’’ x 36’’).
Standard Sizes (Odd sizes available upon
request, manufactured in 5 days)
Door Size W x H (in) Ceiling Opening (in) # of Locks
22 x 30 22 1/4 x 30 1/4 1
22 x 36 22 1/4 x 36 1/4 2
24 x 24 24 1/4 x 24 1/4 1
Clear opening with door opened = W -3½”
Rough wall opening is door size +1/4”
Fire Rating:
2 hour fire barrier, 1 ½ hour B
label, maximum temperature
rise after 30 minutes 250° F
(139° C), after 60 minutes 450°
F (250° C) Warnock Hersey file
#: L-14031 MEA# 507-06-M
PAL - LIGHTWEIGHT INSULATED ALUMINUM FLUSH DOOR
The lightweight PAL door with 1” fiberglass insulation and
neoprene gasket is ideal to reduce sound and air transfers
between partitions. The robust all aluminum construction allows
for its use in large wall or ceiling openings and where corrosion
and moisture are a concern.
Standard Sizes (Odd sizes available upon request, manufactured in 5 days)
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
8 X 8 1 2
12 X 12 1 3
16 X 16 1 6
Rough wall opening is door size +1/4”
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
18 X 18 1 7
24 X 24 1 13
36 X 36 2 30
519
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
Recessed Access Doors
AHA - RECESSED DOOR WITHOUT FLANGE
The AHA standard 5/8” recessed panel will accept ceramic tile, drywall panels, acoustical
tiles or other materials to match the surface finish on which it is installed. It is also
available in different recesses of up to 1 ½” to accommodate multi layers of drywall.
Specifications
Material: 16 gauge steel
Hinge: Continuous piano hinge
Lock / Latch: Allen hex cam latch
Finish:
Phosphate dipped steel with DuPont high
quality grey polyester powder coat nish
Packaging: Wrapped in individual boxes
Recess 5/8" standard
Options
Locks : cylinder lock and key,
Material: stainless steel 304 #4 (brushed nish)
Finish : White
Recess:
1/2", 3/4'' (standard frame)
1", 1 1/4", 1 1/2", (special 2 1/2" frame)
Door Size
W x H (in)
# Of
Locks
Ship
Weight
(Lbs)
8 X 8 1 3
12 X 12 1 5
16 X 16 1 9
18 X 18 1 11
24 X 24 1 16
Rough wall opening is door size +1/4”
AHA Standard Sizes (Odd sizes available
upon request, manufactured in 5 days)
AHA-GYP – RECESSED
DOOR WITH DRYWALL
BEAD FLANGE
AHA-PLY – RECESSED
DOOR WITH PLASTER
BEAD FLANGE
520 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ACCESS DOORS
LHD - FLUSH HEAVY DUTY DOOR FOR LARGE OPENINGS
The LHD door with its 2 1/2” deep frame and heavy duty design is
ideal for large openings where the AHD can no longer suffice. It is
also available in a double leaf version.
MDS - MEDIUM SECURITY DOOR FOR ALL SURFACE TYPES
The MDS is a non-rated flush door with character. It is constructed
with thicker steel, a heavy duty piano hinge and a cylinder lock with
key. It is designed for mental care facilities, detention buildings or to
ensure medium security wherever it might be required.
PHS - HIGH SECURITY DOOR FOR ALL SURFACE TYPES
The PHS is designed to be used in situations where security is of
the utmost importance. It is manufactured with detention grade
materials and can be prepped for all types of dead locks. (Cylinder
lock is optional)
DRD - DRAFT STOP DOOR FOR ATTIC APPLICATION
The DRD is designed to allow passage between attic sections while
preventing back drafts from one to the other. Although not-rated, it is
self-closing and self latching and can be opened from both sides.
BTA - BTV VALVE BOXES WITH HIDDEN FLANGE
Thanks to its beveled door panel, the BTA valve box is
practical and aesthetically pleasing. It comes in various
sizes and depths and can be pre-drilled to accept water
pipes, gas pipes, and conduits. It is also available with a
plexiglass window in the form of a BTV.
521
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ACCESS DOORS
PPA - FLUSH ALUMINUM FLOOR HATCH
The PPA is built for interior use to provide a reliable and secure access between building
floors. Its sturdy 1/4’’ thick diamond or smooth finish aluminum door and 1/4’’ thick
aluminum construction make it the ideal solution for either existing cement floors or
poured-in-place concrete
TRH - STEEL ROOF HATCH
The TRH roof hatch, made of satin coated steel, is designed to offer convenient access
to building roof tops. It is exclusively equipped with gas cylinders providing an effortless
door panel opening. Its heavy duty design and insulation ensure long life and low
maintenance.
Floor Hatches and Roof Hatches
Standard Sizes (Odd sizes available upon request)
Door Size W x H (in) Ceiling Opening (in) # of Locks Ship Wt. (lbs,)
24 x 24 24 ½ x 24 ½ 1 45
24 x 36 24 ½ x 36 ½ 1 55
PPA - RE RECESSED ALUMINUM FLOOR HATCH
Also available:
Standard Sizes (Odd sizes available upon request)
Door Size W x H (in) Ceiling Opening (in) # of Locks Ship Wt. (lbs,)
36 x 30 42 x 36 1 178
36 x 36 42 x 42 1 185
TRH - ALL ALUMINUM ROOF HATCH
Also available:
TRH - COMBINED ALUMINUM COVER AND STEEL BASE ROOF HATCH
OTHER CENDREX PRODUCTS, SIZES AND OPTIONS AVAILABLE
CONTACT YOUR NEFCO REPRESENTATIVE FOR MORE INFORMATION
522 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LINK SEALS / INNERLYNX®
Innerlynx® Installation Instructions
Standard Innerlynx® Models and Properties
Innerlynx® is
shipped as
a belt of 10
interconnected
rubber links.
See next
page for
sizing
chart
Center the pipe, cable or
conduit in wall opening or
casing. Make sure the pipe
will be adequately supported
on both ends. The Innerlynx
is not intended to support
the weight of the pipe.
Connect both ends of the
belt assembly
around the pipe.
Check to be sure all bolt
heads are facing the in-
staller. Extra slack or sag
is normal. Do not remove
links. Note: On smaller
diameter pipe links may
need to be stretched.
With a hand tool, pre-
tighten the belt assembly
by giving each bolt about
2 turns.
Slide belt assembly into
annular space.
Start at 12 o’clock and tight-
en bolt until rubber begins to
“bulge.” Do not tighten any
bolt more than 4 turns at a
time. Continue in a clockwise
manner until links have been
uniformly compressed.
(Approx. 2 or 3 rotations)
Make 2 or 3 more passes
at 3 turns per
bolt, tightening all bolts
clockwise.
Installation Complete
123 4
5 6 7 8
523
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LINK SEALS / INNERLYNX®
Innerlynx Sizing & Ordering Information
Specify:
1. Pipe outside diameter
2. Wall sleeve or core drill inside diameter
3. Model of Innerlynx
4. Specify steel or stainless steel hardware
5. Wall thickness
IN STOCK for
IMMEDIATE
DELIVERY!
See Page 244 for
the NEW
Infinity®
HDPE (Plastic)
Wall Sleeves
524 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LADDERS
Part Step Bottom Approx Approx
No. Size Size Width Spread Wt. (lbs.)
FM1404HD 4' 3" 19
5⁄16" 37
1⁄2" 21
FM1405HD 5' 3" 21
1⁄16" 44
7⁄8" 24
FM1406HD 6' 3" 22
9⁄16" 52
5⁄16" 27
FM1407HD 7' 3" 24
1⁄16" 59
3⁄4" 32
FM1408HD 8' 3" 25
9⁄16" 67
1⁄8" 36
FM1410HD 10' 3" 28
9⁄16" 81
15⁄16" 55
FM1412HD 12' 3" 31
9⁄16" 96
3⁄4" 68
FM1414HD 14' 3" 34
9⁄16" 111
1⁄2" 84
FM1416HD 16' 3" 37
9⁄16" 126
5⁄16" 100
Fiberglass Stepladders
Best seller
FS1500 Series Fiberglass
Step Ladder
Heavy Duty 300 lb. Load
Capacity - Type 1A
Non-conductive ladder designed for
everyday use by contractors and
industry.
• Molded top with tool slots
• Wide back braces
• Full channel fiberglass rail
• Double-rivet step construction
• Inside spreader braces
• Slip-resistant rubber feet
Part Step Bottom Approx Approx
No. Size Size Width Spread Wt. (lbs.)
FS1504 4' 3" 19
9⁄16" 28
15⁄16" 14
FS1506 6' 3" 22
9⁄16" 40
7⁄8" 20
FS1508 8' 3" 25
9⁄16" 52
3⁄4" 26
FS1510 10' 3" 28
9⁄16" 64
11⁄16" 34
FS1512 12' 3" 31
9⁄16" 76
1⁄16" 47
FM1400 Series
Fiberglass Twin Front Ladder
Heavy Duty 375 lb. Load Capacity - Type 1AA
A non-conductive fiberglass industrial
twin front ladder. Equipped with Da
Boot for slip resistant footing
• Heavy gauge steel hinges
• Inside spreader braces
• Heavy Double Gusset Bracing
• Spreader Brace Reinforcement
Plates
• Full channel fiberglass rail
• Riveted step construction with
Gusset
FS1100HD Series
Fiberglass Step Ladder
Heavy Duty 375 lb. Load
Capacity - Type 1AA
• Molded top with recessed tray
• Extra heavy duty inside
spreader braces
• Double rivet step construction
• Heavy duty reinforcement
plates
• 375 lb. rated yellow rail
• Heavy double gusset bracing
Part Step Bottom Approx Approx
No. Size Size Width Spread Wt. (lbs.)
FS1104HD 4' 3" 20
9⁄16" 28" 19
FS1106HD 6' 3" 24
1⁄16" 40
13⁄16" 27
FS1108HD 8' 3" 27
9⁄16" 52
5⁄8" 36
FS1110HD 10' 3" 31
1⁄16" 64
7⁄16" 45
FS1112HD 12' 3" 34
9⁄16" 76
1⁄4" 56
FT1000 Series Fiberglass
Tripod Step Ladder
Heavy Duty 300 lb. Load Capacity -
Type 1A
Part Step Bottom Approx Approx
No. Size Size Width Spread Wt. (lbs.)
FS1004 4' 3" 32 ½" 29" 17
FS1005 4' 3" 34" 35" 20
FS1006 6' 3" 35 ½" 41" 24
FS1007 4' 3" 40
11⁄16" 48" 27
FS1008 8' 3" 42
3⁄16" 54" 31
FS1010 10' 3" 52 ¼" 66" 44
FS1012 12' 3" 55¼" 78" 53
• Aluminum angle feet with
slip resistant rubber tread.
Reinforcement plates wrap
around the rail.
• Long outrigger supports spread
out the base for extra stability.
• Double rivet step construction
• Heavy duty steel gussets
• 300 lb, load capacity.
• Meets or exceeds ANSI and
OSHA safety standards.
525
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LADDERS
FE8800 Series Fiberglass
Manhole Ladder
Heavy Duty 300 lb. Load Capacity -
Type 1A
• Utility style safety shoes
• Round rungs
• Narrow design
• Rail protectors
• Full channel fiberglass rail
• All ladders feature 3-1/4" rail depth; Outside
width: 14"; Inside width: 11-5/8"
Part Total Approx
No. Length Wt. (lbs.)
FE8808 8' 19
FE8810 10' 23
FE8812 12' 25
FE8816 16' 36
FE8818 18' 51
FE8820 20' 45
Fiberglass Extension Ladders
FE3200 Series Fiberglass
Channel Extension Ladder
Heavy Duty 300 lb. Load Capacity -
Type 1A
The extra heavy duty, channel extension
ladder for lighter industrial use.
Full channel non-conductive side rails.
Designed for 300 lb. workload when set at the
proper working angle.
• D-shaped rungs
• Swivel safety shoes
• Outside slide guides
• Mar-resistant rail end caps
• Quicklatch™
Part Total Section Max. Ext Approx
No. Length Length Height Wt. (lbs.)
FE3220 20' 10' 17' 42
FE3224 24' 12' 21' 52
FE3228 28' 14' 25' 58
FE3232 32' 16' 29' 70
FE3236* 36' 18' 32' 79
FE3240* 40' 20' 35' 93
*Type 1 250 lb. rated
Two section extension ladders
Specifications
Rail Stack Inside Width Outside Width
Sizes Depth Ht. Base Fly Base Fly
16'-28' 3
1⁄4" 5
3⁄4" 14
11⁄16" 13
11⁄16" 17
1⁄16" 16
1⁄16"
32'-40' 3
15⁄16" 6
1⁄8" 15
5⁄16" 14
5⁄16" 17
11⁄16" 16
11⁄16"
FE7000 Series Fiberglass
Plate Connect Extension Ladder
Heavy Duty 300 lb. Load Capacity -
Type 1A
Our best extra heavy duty channel exten-
sion ladder for all industrial needs.
Full channel non-conductive side rails.
Equipped with top quality features for last-
ing service.
Designed for a 300 lb workload when set at
the proper working angle.
• Full Metal Boot™
• D-shaped rungs
• Swivel safety shoes
• Outside slide guides
• Mar-resistant rail end caps
• Aluminum plate coonection rungs
• Quicklatch™
Two section extension ladders
Specifications
Rail Stack Inside Width Outside Width
Sizes Depth Ht. Base Fly Base Fly
16'-28' 3
1⁄4" 5
3⁄4" 14
11⁄16" 13
11⁄16" 17
1⁄16" 16
1⁄16"
32'-40' 3
15⁄16" 6
1⁄8" 15
5⁄16" 14
5⁄16" 17
11⁄16" 16
11⁄16"
Part Total Section Max. Ext Approx
No. Length Length Height Wt. (lbs.)
FE7216* 20' 10' 17' 42
FE7220 24' 12' 21' 52
FE7224 28' 14' 25' 58
FE7240 32' 16' 29' 70
*Does not include rope & pulley
Scaffold Tags
Provide a means of communicating whether a
scaffold is safe and ready for use.
• Card stock or unrippable
vinyl material
• 6”x 3”
Louisville Scaffolds can be
found on the next page!
526 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SCAFFOLDS / LADDER ACCESSORIES
Ladder Accessories
Ladder Stabilizers
Fits extension & sin-
gle ladders with rail
to 4" x 1¾". Holds
ladder 12" from wall
and spans 48". Ad-
justable model holds
ladder 13" to 25"
from wall. Attaches
with 2 U-bolts and
feature replaceable
rubber tips.
Part No. Description
LP-2200-00 Ladder Stabilzer
LP-2210-00 Adjustable Stabilizer
Ladder Jacks
Holds stages and planks up to 20"
wide. 6 pitch adjustments and folds
for easy stoarge. Short body spans 2
rungs/Log body spans 3 rungs. Re-
quires (2) Jacks. Part No. Description
Part No. Description
LP-2100-23 Short Body Ladder Jack
LP-2100-13 Long Body Ladder Jack
Ladder Leveler
Holds stages and
planks up to 20"
wide. 6 pitch
adjustments and
folds for easy
stoarge. Short
body spans 2
rungs/Log body
spans 3 rungs. Re-
quires (2) Jacks. Part No. Description
Part No. Description
LP-2100-23 Short Body Ladder Jack
Fortruss® Steel Rolling
Tower Scaffolds SS Series
End Frames:
• Full height unit 29” wide x 68” high (without casters)
• Half unit 29” wide x 39” high (without casters)
Width (assembled):
• 29-1/2” with casters 66-3/4” with outriggers and casters
Platform:
• Exterior grade, edge protected 5/8” thick plywood
• 6’unit - 29” wide x 65-3/8” long
• 8’ unit - 29” wide x 89 3/8” long
Platform height (max.): with casters
• 6’ unit - 6’ 3”
• 12’ unit - 11’ 8”
• 15’ unit - 14’ 10”
Load capacity:
• 6’ long unit - 655 lb (50 lb/sq. ft)
• 8’ long unit - 450 lb (25 lb/sq. ft)
SS0606
Size End Truss Plywood Outrigger Guardrail
Model (H x L) Frames Assem. Platform Casters Kit Toeboard Kit Weight
SS0306* 3’ x 6’ (2) 3’ (2) 6’ (1) 6’ - - - 112
SS0308* 3’ x 8’ (2) 3’ (2) 8’ (1) 8’ - - - 127
SS0606 6’ x 6’ (2) 6’ (2) 6’ (1) 6’ (4) - - 154
SS0608 6’ x 8’ (2) 6’ (2) 8’ (1) 8’ (4) - - 171
SS1206 12’ x 6’ (4) 6’ (4) 6’ (2) 6’ (8) (1) (1) 418
SS1208 12’ x 8’ (4) 8’ (4) 8’ (2) 8’ (8) (1) (1) 463
SS1506 15’ x 6’ (4) 6’ (2) 3’ (6) 6’ (3) 6’ (8) (1) (1) 530
SS1508 15’ x 8’ (4) 6’ (2) 3’ (6) 8’ (3) 8’ (8) (1) (1) 590
Guardrail and Toeboard Kit
(Meets OSHA requirements)
Two assemblies are easily installed and removed. 4-3/4” high steel
toeboard is standard and welded in place. Gates swing inward, latch
with gravity-operated latches.
OSHA requires guardrail, toeboard and outriggers when the platform is more
than 10’ above the floor surface.
Base Plate (set of 4)
For fixed set-up and grading applications.
*Withoutcasters Do not stack higher than 3 units totaling 15’.
Each set of end frames requires one pair of trusses and platform.
SS1506
Scaffolds
527
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
EXTENSION CORDS
Outdoor Extension Cords
3-Conductor SJT W-A Grounding 300 V
Year-round, all-weather extra flexible cord.
Ideal for garden and outdoor tools - meets UL and OSHA
standards for outdoor cords. Lighted end indicates power status.
Part No. Length AWG Watts Amps
Heavy Capacity - 300V
05-33041 25' 14/3 1875 15
05-33042 50' 14/3 1875 15
05-00343 100' 14/3 1625 13
Extra Heavy Capacity - 300V
05-00347 25' 12/3 1875 15
05-00348 50' 12/3 1875 15
05-00349 100' 12/3 1875 15
Cold Weather Extension Cords
3-Conductor SJTOO W-A Grounding 300 V
Remains flexible in extreme hot or cold weather conditions.Can
be used in temperatures as low as -58° F or as high as 221°
F. Cords also resist the negative effects of oil, water, weather,
abrasion, and ozone. Meets OSHA and UL standards
Part No. Length AWG Watts Amps
Extra Heavy Capacity - 300V
05-00141 25' 12/3 1875 15
05-00142 50' 12/3 1875 15
05-00143 100' 12/3 1875 15
U-Ground
NEMA 5-15
Outdoor Extension Cords
3-Outlet Power Block Extension Cords
3-Conductor SJT W-A Grounding 300 V
Year-round, all-weather extra flexible cord.
Ideal for garden and outdoor tools - meets UL and OSHA
standards for outdoor cords.
Part No. Length AWG Watts Amps
Extra Heavy Capacity - 300V
05-00123 25' 12/3 1875 15
05-00124 50' 12/3 1875 15
05-00125 100' 12/3 1875 15
U-Ground
NEMA 5-15
Adapters
3-Conductor SJT W-A Grounding 300 V
Adaptors for the Professional trade includes
3-outlet power block, u-ground to locking
and vise versa conversion adapters. "Y", "W",
R.V., and GFCI adapters are also available in 15 and 20 amp
configurations. All of these products are designed to maximize
flexibility and are compatible with a variety of portable tools.
Part No. Length Outlets AWG Watts Amps GFCI
Triple Tap Power Block - (No GFCI)
04-00090 2' 3 12/3 1875 15 NO
Triple Tap Power Block - (with GFCI)
04-00105 3' 3 12/3 1875 15 YES
In-line GFCI with 1 Outlet
04-00103 3' 1 12/3 1875 15 YES
Locking In-Line GFCI with 1 Outlet
04-00104 3' 1 12/3 2500 20 YES
04-00090 04-00104 04-00103 04-00105
U-Ground
NEMA 5-15
Metal Shade Work Light with Outlet in Handle
Incandescent work lights are ideal for workshop and garage
environments. Heavy-duty metal shade with hanging hooks for
flexibility. Work lights come with 25' or 50' feet of SJT wire and
accept 75 watt bulbs. Additional outlets included in handle.
Part No. Length AWG Bulb Outlets
08-00184 25' 16/3 75W 1
08-00185 50' 16/3 75W 1
U-Ground
NEMA 5-15
GFCI Adapters
528 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PORTABLE LIGHTING
Portable Quartz Floodlights
6 foot or 7 foot Tripod Lights
• 1000W ( 2 - 500W Heads)
• Folding tripod base and removable
head assemblies for easy set-up and
storage
• Cord retainer mounted on the base to
prevent tip over
• Adjusts from 4’ to 6'/7’
• 8’ 16/3 SJTW power supply cord
• All steel stand.
Part No. Description Weight
5610i 6' Economy Floodlight - 3 Stage Mast 17 lbs.
5710 7' Commercial Floodlight - 2 Stage Mast 25 lbs.
Metal Halide Cart Lights
Single and Dual Head
• Features 1000W single
or dual head fixture(s).
(110,000 lumens /
220,000 lumens)
• All frames are made of
1-1/4" 12 gauge square
steel tube and are
powder coated safety
yellow
• Head assemblies are
easily removed from
the mast and detach
from their ballast. This
enables one person set-
up and offers safety
and convenience in
transporting storage
• All units have steel generator platforms and can be plugged
directly into any standard 15 amp receptacle
•Model 5309C has a manually operated steel telescoping
mast with a portable, detachable ballast.
•Model 5322 has a steel telescoping mast which is raised and
lowered by a self-braking winch and fixed ballast
• Each mast lays down or removes for easy transporting
Part No. Description Weight
5309C Single Fixture Cart Light - 5 ft. - 10' ht. 102 lbs.
5322 Dual Fixture Cart Light -5.5' - 12' ht. 196 lbs.
5309C 5322
Portable Quartz Utility Light
500W Economical Lighting
• Tubular steel frame with metal guard
• Fully weatherproof and UL Listed for use
in wet locations
• One quartz halogen bulb included with
each fixture
Part No. Description Weight
5125I Utility Light, 500W 5 lbs.
5165I Clamp-On Utility Light, 150W 3 lbs.
Plastic Cage String Lights
• 50' (5 Lights) and 100' (10 Lights) strings.
• 150W Bulb (not included)
• 12/3 SJTW power supply cord
• Plastic bulb guard
Part No. Description Weight
08-00193 50' Plastic Cage String Light - 5 Lights 13.89 lbs.
08-00194 100' Plastic Cage String Light - 10 Lights 25.35 lbs.
WL200MH 250 WATT
Metal Halide Wobblelight
• 20000 lumens = to 16 - 100W Bulbs,
2.25 AMPS, (110V)
• Fan Cooled, Available Color: Yellow
• 27 lbs., 36" Tall, 18" Wide
WL400MH 400 WATT
Metal Halide Wobblelight
• 40000 lumens = to 31 - 100W Bulbs, 3.6
AMPS (110V)
• Fan Cooled, Available Color: Yellow
• 28 lbs., 36" Tall, 18" Wide
WL500M 500 WATT
Halogen Wobblelight
• 8000 lumens = to 7 - 100W Bulbs,
3.6 AMPS, (110V)
• Fan Cooled, Available Color: Yellow
• 25 lbs., 36" Tall, 18" Wide
Portable Halogen Bay Lite
• Pulse Start models comply to EISA Act
2007 for energy efficiency
• Meets NEC 2005 & 2008 requirements
• UL Listed, suitable for damp locations
• 400 W, High light output & long lamp life
(Avg. <10,000 hrs.) provide cost effective
& low maintenance operation
• Heavy-duty formed steel enclosure with
yellow powder-coated finish
• Open-air ballast for cooler operation
• Models available with secondary "daisy
chain" output cords in 1, 25 and 50 ft
secondary (female) - connect up to 6 lamps
together from a single 20 amp source!
• Clear metal halide pulse start lamp included
• Hook with locking feature - fixture mounts
in seconds, no tools required
• (2) 3/4" knock-outs for optional conduit access
Part No. Description
MHX-1004 400W Bay Lite
529
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FLASHLIGHTS
Flashlights
Cam-driven beam changes from
spot to flood for a perfectly
focused beam. Features self-
cleaning switch eliminating
oxidation, for extremely
reliable operation. Includes
spare Krypton lamp in tail cap.
O-rings at each opening ensure
resistance to water and shock.
Aluminum construction with
black anodized finish. Choose
from 4-Cell D, 3-Cell D, 2-Cell
D, 2-Cell C, 3-Cell C, 4-Cell C,
4-Cell D, 5-Cell C, 5-Cell D or
6-Cell D units. All are black
and feature a knurled surface
for a secure grip.
Part No. Description
8ER-0046 2-Cell C, 9" L
8ER-0047 2-Cell D, 10" L
8ER-0048 3-Cell C, 10-3./4" L
8ER-0049 3-Cell D, 12-1/4" L
8ER-0050 4-Cell C, 12-3/4" L
8ER-0051 4-Cell D, 14-3/4" L
8ER-0052 5-Cell C, 14-3/4" L
8ER-0053 5-Cell D, 17" L
8ER-0055 6-Cell D, 19-1/4" L
Industrial Flashlights
Rugged yellow plastic housing.
Bright Krypton bulb. With or
without magnet. 2-"D" cell (not
included).
Part No. Description
IN2-K 2-"D" Cell
IN2-KML 2-"D" Cell
with magnet
"No-Roll" Economy
Flashlights
Black PLastic body with
hexagon shaped head
prevents rolling. 2-"D" cell (not
included).
Part No. Description
PCECON-B
2-"D" Cell
Economy
Flashlight
18V Pivoting
Head Flashlight
• Wide angle
beam
• Head rotates
90°
• Lightweight,
compact
design
• Battery/
Charger not
included
Part No. Description
DW908 18V Flashlight
18V Fluorescent
Area Light
• Built-in hook
allows hanging.
• Over-molded lens
• 13W fluorescent
bulb
• Lightweight, com-
pact design
• Battery/Charger
not included
Part No. Description
DC515 18V Fluorescent
Area Light
Worklight/Char-
ger w/GFCI Protection
• Cordless/corded 38W fluo-
rescent worklight runs on
12-18V DeWalt batteries or
AC power to provide area
lighting.
• 1 hour dual port battery
charger charges (2) DeWalt
7.2-18V batteries (NiCad).
• (3) GFCI protected power
outlets.
• Spring loaded battery hold
down keeps batteries secure.
• Quick and easy fold-up, trans-
port and storage.
Part No. Description
DC022 Worklight/Dual-
Port Charger
36V, 28V & 18V
Floodlights
• Flex neck design with lock-
able head clips.
• Wide angle beam of light.
• 8 hours run-time on a single
charge.
Battery/Charger not included
Part No. Description
DC509 36V Floodlight
DC519 28V Floodlight
DW919 18V Floodlight
DC509
DC519 DC919
Lighting
Worklight
• Clip-Lok™
system ready.
• 140° pivot-
ing head.
Part No.
Description
49-24-0185 V28 Li-Ion
Work Light
12V Li-Ion
Worklights
Hands-free light in a compact
and lightweight package. Both
lights feature a 90° rotating
head. Integrated magnet pro-
vides hands-free use.
Worklight
49-24-0145
• Xenon incandes-
cent bulb
LED Worklight
49-24-0146
• 90-degree pivot-
ing aluminum head –
Impact and weather
resistant
• LED lights provide
2X brighter light and
runs twice as long as
incandescent bulbs
Lights do not include M12™
battery or charger
Part No. Description
49-24-0145 Cordless Xenon
Worklight
49-24-0146 Cordless LED
Worklight
18V Li-Ion
Worklights
• Ergonomic, compact, and
lightweight design
• Fold-away utility hook
• 135 degree rotating head
Part No. Description
2735-20 M18 LED
Worklight
49-24-0171 M18 Worklight
49-24-01712735-20
Lighting
DeWalt and Milwaukee Cordless Lights DO NOT
include battery or charger. Please our Cordless
Tool Section for complete listing
530 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Procell® Batteries
This high-performance
alkaline battery line is
dedicated to industrial
applications. Dependable,
long lasting even after four
years in storage. Operates
reliably in temperature
extremes of 20° F to 160°
F. Lasts up to seven times
longer than regular zinc carbon batteries. Date-coded to ensure
freshness. Distinctive industrial label reduces pilferage.
Part No. Description
8BR-0010 AAA Cell Alkaline
8BR-0008 AA Cell Alkaline
8BR-0007 C Cell Alkaline
8BR-0006 D Cell Alkaline
8BR-0009 9 Volt Alkaline
8BR-0012 6 Volt Alkaline, Spring Terminal
8BR-0013 6 Volt Alkaline, Screw Terminal
BATTERIES / BULBS / COLD WEATHER
Incandescent Light Bulbs
Part No. Description
5902FR 75W Rough Service Light Bulb
5903FR 100W Rough service Light Bulb
Quartz Halogen Light Bulbs
Part No. Description
5911 150W Replacement Bulb
5905 500W Replacement Bulb
Metal Halide Light Bulbs
Part No. Description
5910C 1000W Conical Bulb
Concrete Curing Blankets
• 2.8 effective R-value
• 6’ x 25’ rolls
• Aluminum coated cover
• 2 layers of bubble
• R-value tests conform to ASTM C-518
and/or ASTM C-236
Part No. - RVALUE2.8
Master TC200V Propane
Convection Heater
• 100 - 200,000 BTU
• Requires 100 lb fuel tank
Part No. - TC200V
Tillman Polar Fleece Gloves
Polar fleece warmth…leather palm protection
• Soft, comfortable and warm polar fleece
back with ColdBlock™ lining
• Two palm materials available - Top grain
pigskin, Cowhide split
Cold Weather Extension Cords
3-Conductor SJTOO W-A Grounding
300 V
Remains flexible in extreme hot or cold weather
conditions.Can be used in temperatures as
low as -58° F or as high as 221° F. Cords also
resist the negative effects of oil, water, weather,
abrasion, and ozone. Meets OSHA and UL
standards
Part No. Length AWG Watts Amps
Extra Heavy Capacity - 300V
05-00141 25' 12/3 1875 15
05-00142 50' 12/3 1875 15
05-00143 100' 12/3 1875 15
Replacement Bulbs
Cold Weather Supplies
Calcium Chloride Ice Melt
Stop Slips and Falls Before They Happen
• Generates heat on contact.
• Effective in temperatures down to -25° F.
• No powdery white residue.
• Safer for plantings and concrete.
• 50 lb. bags.
•To Order: P/N QIK-JOE
See Our Safety Section for more
Glove Options!
Combination Radiant & Fan
Forced Heater
• 3 Settings – 600W Radiant, 900W Fan
Forced, 1500W Radiant & Fan Forced.
• Temperature controlled thermostat.
• Dual Safety – Tip Over Switch &
Manual Reset Type Limit Control.
Part No. - 198TMC
531
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TEMPORARY POWER DISTRIBUTION CENTERS
CEP’s “G” series Portable Power Distribution Centers have been engineered utilizing the latest in GFCI technology, providing the user
with a new level of electrical safety. These power distribution centers are UL listed for outdoor use and designed to stand up to the
toughest of jobsite conditions. Each unit has been carefully assembled to provide the ultimate in electrical safety as well as meeting
current OSHA standards.
Part Power Power Receptacles Overload
No. Rating Inlet Outlet Qty. Type GFCI Protected Weight
6506GU* UL Listed - 50 Amp 125/250 volt CS6375 CS6369 6 5-20R Yes Yes 29
*Udesignatesstraightblade20A125Vreceptacles
Caution:
Use of Temporary Power Distribution Centers in conjunction with generators reduces the life expectancy of the MOV due to irregular
voltages and surges.
Specifications
Input current: 50 amp 1 phase 125/250 volt A.C. 3 ply 4 wire. Trip level: 4 - 6 milliamps. Trip time: Less than .025 seconds nominal.
Dimensions: W = 14.5” L = 21” H = 11”. Chassis: 16 gauge steel. Top: 14 gauge steel. Legs: 10 gauge steel. Finish: 3 mil UL listed
polyester powder coat.
Temporary Power Accessories
Temporary Power Cord
Part No.: 6400M
Length: 100
Gauge: 6/3 - 8/1
Type: S
Jacket: Rubber
Pack: 1
Weight: 63
* Weather Resistant Boots are available on request.
Temporary Power Distribution Centers
“G” Series GFCI Protected
50A 125/250V
Inlet and Outlet
Pilot light indicates
power is on and
proper circuit
integrity
Models available with either
4 or 6 20A/125 receptacles
Secondary
Surge Arrestor
Each box has one Non GFCI
30A 250V twist lock receptacle
Each 125V receptacle is
individually protected with
a special GFCI module
Legs are 10 gauge
steel, bolted on for easy
replacement
Provides open neutral and open
ground protection as well as
GFCI
GFCI module has MOV to help protect against
damage caused by transient voltage surges
Temporary Power Distribution Centers
Mini Portable Power Center
Mini Series Portable
Power Centers perform
the same functions as
standard systems. These
compact units break
down 125/250V power
into two (2), usable,
20A 125V circuits. As
in the “G” series box,
each circuit has its own
breaker, pilot light, and
GFCI protection module.
Used in conjunction with
10 gauge, 4 wire power
cords, these small power
centers provide a very cost effect means of distributing power
throughout a jobsite. Mini Centers are easily adapted to existing
temporary power centers, generator sets, or used independently
any place 125/250V power is available.
Part No. Description Weight
6502GU 20A Mini Portable Power Center 15 lbs.
532 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STORAGE BOXES
Small Storage Boxes
• Protects small tools and supplies; single lock hasp for use
with padlock
• Compact side handles for easy portability
• Heavy-duty hinges and chain connector to hold lid in upright
position
• Welders box (1230) has cut out for hoses
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
1230 3.3 12 30 16 48
1531 4.5 15 31 18 51
Mobile Storage Boxes
• Easy mobility for job-site or shop use
• Built-in pre-tapped skids for easy caster installation
• Large fold-down recessed handles for convenient lifting
• Dual recessed and concealed lock protector for maximum
security against drilling and cutting lock
• Heavy-duty piano hinges with non-removable pin
• Steel support arms to hold lid in upright position
• Convenient storage tray on back wall for small items
(Models 2448, 2460 and 3068 only)
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
1332 4.9 14 32 19 83
1636 6.7 17 36 19 99
2142 9.7 20 42 20 113
2448 16 24 48 24 146
2490 20 24 60 24 182
3048 25 30 48 30 183
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
666 2 Ridgid, 2 Swivel 4" 2" 400 lbs 13
695 2 Ridgid, 2 Swivel 4" 2" 375 lbs 10
694 4 Swivel 4" 2" 400 lbs 13
53904 Gas Springs for 3360, 4848, & 4860 Storage Boxes
Flat Top Boxes
• Flat-top design provides more
storage capacity for tall,
bulky items, plus a large work
surface for job-site plans
• Gas springs allow easy
opening and closing
• Double-hinged cover folds
up and locks out of the way
• Dual recessed and concealed
lock protectors provide
maximum security against
drilling and cutting locks
• Features two reinforced
steel shelves with large lip to prevent items from rolling off
• Channel reinforcements on lid lock side panels into lid for
added security when closed
• Large fold-down recessed handles for convenient lifting
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3360 34.5 33 60 30 256
4848 49 48 48 30 292
4860 50 48 60 30 305
Storage Boxes
4872 / 4872R Flat Top Mobile Storage Boxes
• Weather resistant design
• Side-wall storage.
• 16 ga. steel construction; (3) 12 ga. steel support skids.
• Hinged lower shelf allows for easy storage of larger objects.
• Zero lock component assembly required.
• Recessed and concealed lock protector inhibits forced entry
and lock corrosion.
• Angled handle recess prevents pinch points.
• Hemmed (reinforced) high strength shelves.
• Continuous non-removable hinge pins to prevent theft.
• Load ramp allows easy storage of larger heavier items
(4872R only).
• Overlapped welded corners instead of butt welding for
greater strength.
• Strategically located, easily accessible, durable gas-shocks
provide for easier opening lid.
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
4872 60 48 72 30 360
4872R 60 48 72 30 375
4872R
with ramp
533
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STORAGE BOXES
Slant Top Boxes
• Large capacity storage with traditional slant-top design
• Gas springs allow easy opening and closing
• Double-hinged cover folds up and out the way
• Dual recessed and concealed lock protectors provide
maximum security against drilling and cutting locks
• Features two reinforced steel shelves with large lip to prevent
items from rolling off (Model 2260, one shelf only)
• Large fold-down recessed handles
• Add optional casters for easy mobility
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
2260 32 36 60 32 228
3648 34 48 48 30 273
3660 44 48 60 30 282
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
666 2 Ridgid, 2 Swivel 4" 2" 400 lbs 13
695 2 Ridgid, 2 Swivel 4" 2" 375 lbs 10
694 4 Swivel 4" 2" 400 lbs 13
53950 Gas Springs for 2260 Storage Boxes
53951 Gas Springs for 3648, & 3660 Storage Boxes
Field Office
• Separate storage for tools
and blueprints
• Built-in key lock for top
section
• Buttom section has lock
protector
• Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
8060 116.5 80 60 42 626
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
4-Door Cabinet
2 Front, 2 Rear)
• Flush mounted doors
• Concealed lock protector provides
maximum security
• Secure storage with easy access
• Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5760 59.3 57 60 30 437
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
Mobile Workbench
• Flush mounted doors
• Concealed lock
protector
• Large capacity storage
box that’s also a
workbench
• Tough composition
board work surface on
top with built-in chain vise and telescoping wrench stop
• Two swivel casters and two rigid casters for easy mobility
• Four reinforced steel shelves with large lip to prevent items
from rolling off
• Large fold-down recessed handles for convenient lifting
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3548 23 30 48 24 257
Mesh Job Box
• High visibility mesh screen
on 3 sides
• 1/2” conduit support
tunnels for top storage
(conduit not included)
• Sturdy handle for mobility
• Compartments on doors
for small tools and parts
storage
Platform for shovels, picks,
brooms and other long handle
tools
Part No. Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5060MESH 36.8 54 28 57 401
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
403 4 Swivel 6" 2" 500 lbs 22
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 20
Storage Boxes
534 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STORAGE BOXES
Storage Boxes
2-Door Cabinet
• Flush mounted doors
• Concealed lock protector
provides maximum security
• Large fold-down recessed
handles for convenient
lifting
• Secure storage with easy
access
• Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3448 22.5 34 48 24 201
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
Bi-Fold Utility Cabinet
• Maximum storage capacity with minimum floor space
requirements
• Four individual 15” D x 14-1/2” H x 60” W storage
compartments on each side
• Reinforced steel shelves welded in place for added strength
and durability
• All shelves feature large front lip to keep small items from
rolling off
• Each Bi-fold section is mounted on four casters for easy
opening and closing
• Sturdy lifting eyes for transporting from floor to floor on
construction sites
• Large fold-down recessed handles
• 6 Swivel and 2 Ridgid, 4” casters included
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5860 60.4 58 60 30 548
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
Double-Door Utility
Cabinet
• Complete workshop for
storing supplies and tools
close to work area
• Double doors swing wide for
full access to interior
• Shelves feature
large front lip to
keep small items from rolling
off
• Top features full-length rain
gutter for weather protection
• Sturdy lifting eyes for transporting from floor to floor on
construction sites
• Large fold-down recessed handles
• Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
3448 22.5 34 48 24 201
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
Double-Door Utility Cabinet With Lock Protector
• Flush mounted doors
• Concealed lock protector provides maximum security
• Large fold-down recessed handles
• Secure storage with easy access
• Optional casters available
Part
No.
Capacity
(cu. ft.)
Height
(Inch)
Width
(Inch)
Depth
(Inch)
Weight
(lbs.)
5660L 46 56 60 24 401
Accessories - Casters
Part
No. Desc.
Wheel
Dia.
Thread
Length
Cap./
Wheel
Weight
(lbs.)
603 2 Ridgid, 2 Swivel 6" 2" 500 lbs 22
503 4 Swivel 6" 2" 500 lbs 20
Model Size Shipping Wt.
601040 4" 15.0
602040 6" 19.0
Set incl. a pair of fixed & a pair of swivel-
ing casters
Heavy-Duty Casters
535
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
STORAGE BOXES
Storage Boxes
Heavy-Duty Chests
Size Guide
W
H
L
Part No. Description Ln. W. Height Cu.
Ft.
Wt.
(lbs)
1-652990 36" L Chest 36" 20" 23-3/4" 8.3 98
1-653990 42" L Chest 42" 20" 23-3/4" 9.3 118
1-654990 48" L Chest 48" 24" 27-3/4" 15.4 148
1-655990 60" L Chest 60" 24" 27-3/4" 19.3 182
1-656990 48" L Chest 48" 30" 33-3/8" 24.3 190
1-568990 72" L Chest 72" 24" 27-3/4" 23.2 220
Piano Lid Boxes
DROP-FRONT PIANO BOXES
feature reinforced door for easy
loading and unloading of heavy
equipment. Available in 60˝ and 74˝
length models.
Full-length stainless steel
hinge resists corrosion
Pad-lockable drop down door
prevents access to heavy tools and
equipment while the piano box is
open
Efficient tapered ramp design
makes it easy to roll heavy objects
into storage
HIGH-CAPACITY PIANO BOX
features 75% more capacity than the
popular model 1-685990. Nearly 5´
tall sidewalls organize more tools
and equipment on the job site.
Three 500 lb. Capacity; full width
rear shelves
Six Built-In sidewall storage bins
Punched Holes for hanging safety
harnesses
Tilt-N-Stow™ bottom shelf for easier
access to base
Part No. Desc Ln. W. Height Cu.
Ft.
Wt.
(lbs)
1-681990 Piano Lid 48" 31" 50" 38 286
1-682990 Piano Lid 60" 31" 50" 47.5 326
1-688990 Piano Lid 60" 31" 38" 34.5 283
1-689990 Piano Lid 74" 31" 50" 56.5 423
HIGH CAPACITY PIANO LID BOX
1-685990 Piano Lid 74.5" 35.5" 60-1/4" 85.7 500
DROP FRONT PIANO LID BOX
1-683990 Piano Lid 60" 30" 50" 47.5 405
Utiltiy Bin Cabinets
Size Guide
C
B
D
E
A
See Size Guide for Dimensions
Part No. # of
Doors A B C D E Cu.
Ft.
Wt
(lbs)
694990 2
60-3/4"
60-1/8"
24-1/4"
53-1/4"
25-3/4"
47.5 379
695990 4 32-1/4" 63.7 523
697990 2 24-1/4" 47.5 366
698990 4 32-1/4" 58.7 436
Field Office
Available on
Request
Call for
Information
Part No. Description Ln. W. Height Cu.
Ft.
Wt.
(lbs)
1-674990 Field Office 63" 42" 80" 104 660
536 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
STORAGE BOXES
Product Catalog Number Description Width Length Height Weight
DWJB1332 Storage Chest 19" 32" 15" 90 lbs.
DWJB2448 Storage Chest 24" 48" 26" 164 lbs.
DWJB2460 Storage Chest 24" 60" 26" 190 lbs.
DWJB3048 Storage Chest 30" 48" 31" 213 lbs.
DWJB3660 SLANT-TOP
Storage BOX 30" 60" 48" 333 lbs.
DWJB4860 FLAT-TOP
Storage BOX 30" 60" 48" 354 lbs.
DWJB5660L Storage
CABINET
24" 60" 56" 425 lbs.
Features:
• With our GearGuard™ Multi-
Point Locking System, your gear
stays safe.
• Ergonomic Handles are designed
for easy gripping.
THE NEW LINE OF HEAVY-DUTY JOBSITE STORAGE BOXES FROM DEWALT®
FULLY LOADED
• Optional Shackleless
Padlock from American
Lock is the most secure
lock available.
• Skyhooks allow quick
and safe lifting of the
storage box.
• Electrical Access Port al-
lows you to recharge your
batteries while your tools
are securely locked inside.
• Continuous Hinge with
Non-Removable Pin pro-
vides added security.
• Fold-Up Shelf is great for
accommodating storage
of larger items.
537
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MASTERLOCK
Key
KA - This provides "same key"
convenience and eliminates the
need for multiple keys where
numerous padlocks are used.
All padlocks in the set are keyed
the same.
LF - 1-1/2" Shackle
LH - 1-7/8" Shackle
LJ - 2-1/2" Shackle
• 2" wide solid brass case and
weatherability
• Hardened steel and brass shackles
• Set-your-own combination
• Resettable to allow for a personalized combi-
nation
Part No. A B C
175 5/16" 1" 1"
175LH 5/16" 2-1/4" 1"
• Hard steel bodies for strength
• Hardened steel staples resist cutting and sawing
• Hardened steel locking eyes for strong cut resis-
tance
• Tamper proof hinges help resist prying
Part No. Description
702D 2-1/2" Long
703D 3-1/2" Long
704D 4-1/2" Long
706D 6" Long
• Hardened boron alloy shackle for superior cut resistance
• Removable cylinder can be replaced or repinned
• Body and cylinder covers protect locks from water, dirt and grime
Shackle Dimensions
Shelf Master B C
Part Pack Carton A Vertical Horizontal
No. Description Qty. Qty. Dia. Clearance Clearance
6127 Keyed Different
5 pin W6000 cylinder 6 24 7/16" 1-3/8" 7/8"
6127LH Keyed Different; 5 pin
W6000 cylinder;
Long shackle 6 24 7/16" 1-7/8" 7/8"
6127LJ Keyed Different; 5 pin
W6000 cylinder;
Long shackle 6 24 7/16" 2-3/8" 7/8"
6127KA Keyed Alike; 5 pin
W6000 cylinder 6 24 7/16" 1-3/8" 7/8"
6127KALH Keyed Alike; 5 pin
W6000 cylinder;
Long shackle 6 24 7/16" 1-7/8" 7/8"
6127KALJ Keyed Alike; 5 pin
W6000 cylinder;
Long shackle 6 24 7/16" 2-3/8" 7/8"
6127MK Master Keyed 5 pin
W6000 cylinder 6 24 7/16" 1-3/8" 7/8"
No. 175 Padlock
Laminated Steel Pin
Tumbler Padlocks (4 Pin)
• Hardened Steel Shackle
• 4 pin cylinder helps prevent picking
• Dual locking levers provide extra
pry resistance
Part
No. Description
Shackle
Clerance
(B)
1-3/4" Wide Laminated Steel Body - Shackle Dimensions A: 5/16", C: 3/4"
1KA Keyed Alike 15/16"
1LJ Keyed Different 2-1/2"
1KALJ Keyed Alike 2-1/2"
1-9/16" Wide Laminated Steel Body - Shackle Dimensions A: 9/32", C: 5/8"
3 Keyed Different 3/4"
3KA Keyed Alike 3/4"
3LH Keyed Different 1-7/8"
3KALH Keyed Alike 1-7/8"
3LF Keyed Different 1-1/2"
3KALF Keyed Alike 1-1/2"
2" Wide Laminated Steel Body - Shackle Dimensions A: 3/8", C: 15/16"
5KA Keyed Alike 1"
5 Keyed Different 1"
5LJ Keyed Different 2-1/2"
5KALJ Keyed Alike 2-1/2"
1-1/8" Wide Laminated Steel Body - Shackle Dimensions A: 3/16", C: 1/2"
7 Keyed Different 9/16"
7KA Keyed Alike 9/16"
7LJ Keyed Different 2-1/2"
7KALJ Keyed Alike 2-12"
#3 and #5 Best Choices
for Storage Boxes
Security Hasps
Padlocks - Keyed
Weather Tough Padlocks
538 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Poly Sheeting
Widely used in:
Construction
• To cover freshly poured concrete
• Protects material and equipment
• Provides dust barriers in demolition
Clear. Black available. Also available with Woven
Reinforcement and Fire Retardant.
Part No. Size
C-410 10 x 100 4 mil
C-412 12 x 100 4 mil
C-420 20 x 100 4 mil
C-610 10 x 100 6 mil
C-611 12 x 100 6 mil
C-620 20 x 100 6 mil
TARPS / POLY SHEETING
Poly Woven Tarps
• Weatherproof
• Water repellent
• Mildew proof
• Flexible
• Washable
• Lightweight
Part No. Part No.
Blue Economy Size Premium Green
TARP8X10BLUE 8' X 10' TARP8X10GREEN
TARP10X12BLUE 10' X 12' TARP10X12GREEN
TARP10X20BLUE 10' x 20' TARP10X20GREEN
TARP12X16BLUE 12' x 16' TARP12X16GREEN
TARP12X20BLUE 12' x 20' TARP12X20GREEN
TARP16X20BLUE 16' X 20' TARP16X20GREEN
TARP18X24BLUE 18' x 24' —
TARP20X20BLUE 20' X 20' TARP20X20GREEN
TAPR20X25BLUE 20' x 25' TAPR20X25GREEN
TARP20X30BLUE 20' X 30' TARP20X30GREEN
TARP30X40BLUE 20' X 40' TARP30X40GREEN
TARP30X50BLUE 30' x 50' TARP30X50GREEN
TARP30X60BLUE 30' x 60' TARP30X60GREEN
TARP40X40BLUE 40' X 40' TARP40X40GREEN
TARP40X60BLUE 40' X 60' TARP40X60GREEN
TARP50X100BLUE 50' x 100' —
TARP100X100BLUE 100' x 100' —
Molded Rubber Straps
• Black rubber with steel "S" hooks
Part No. Ln.
BUNG10 10"
BUNG15 15"
BUNG21 21"
BUNG31 31"
BUNG41 41"
Dust Shield™
Pro Adjustable
Poles
This unique system
makes constructing
temporary walls to control dust
quick and simple! The DUST
SHIELD Pole locks the screening
material firmly against the ceiling.
The Dust Shield poles can be
extended up to 12 feet. Made of
heavy gauge aluminum.
Part No. Description
DSPRO2 Dust Shield Pro
Zip N Close® Zipper Doorway System
ZIP n CLOSE® can create any size
doorway with poly sheeting or
canvas to control dust, reduce heat
loss or create an instant entrance /
exit to any closed area. For interior
or exterior use. Zip n Close® is
perfect for all types of construction.
Meets federal containment specs
for asbestos removal.
Part No. Description
ZU01 3" x 7' Peel and Stick Zipper
ZU15 1.5" x 7' Peel and Stick Zipper
539
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Carpet Shield®
Ideal temporary carpet protection for remodeling, painting, moving,
model home tours and parties. A clear, 3 mil self-adhering
protective film for all types of carpeting. Non-slip surface that’s
highly resistant to tears and punctures, Carpet Shield removes
cleanly and easily.
Part No. Size Part No. Size
CS24200 24"" x 200'' roll CS36500 36"" x 500' roll
CS36200 36" x 200' roll Call for additional sizes
Floor Shield™
A self-adhering protective film for hard surfaces, such as tile,
vinyl, VCT, laminates, marble, granite, and factory-finished
hardwood. A true multi-purpose product, it is ideal for use during
construction, remodeling, plumbing and electrical work and
painting. May be applied for up to 45 days. Reduces damage
claims and clean up time, resists ripping and tearing, does not
shift like paper and it applies and removes easily.
Part No. Size Part No. Size
FS36500 36" x 500' Call for additional sizes
Water Shield Reinforced Kraft Paper
Non-staining, water resistant WATER SHIELD is made from
a lamination of two strong kraft papers with nylon scrim
reinforcement. Water Shield protects flooring surfaces like
hardwood, laminate and tile and does not tear under normal traffic
wear, eliminating the need to constantly replace torn paper. Water
Shield is moisture resistant and durable enough to be re-used,
making it a more economical choice than other products such as
red-rosin paper.
Part No. Size Part No. Size
WS36300 36" x 300' roll WS72300 72" x 300 roll
WS48300 48" x 300' roll WS96300 96" x 300' roll
WS60300 60" x 300' roll
Kraft Paper
Kraft Wrapping Paper
All-purpose protective paper, may be used to cover floors, carpets,
etc. Brown.
Part No. Size Part No. Size
M36 36" x 720' M48 48" x 300'
Red Rosin Paper
Strong, economical paper for temporary
surface protection. (500 sq.ft./roll)
Part No. Size
333921 36" x 167'
FLOOR - SURFACE PROTECTION
Duct/HVAC Covers
Prevents construction dust and
debris from entering ductwork
system. Ideal protection during
transporting, storing and
construction. Blue, self-adhering
protective film has a high adhesion
suitable for all types of duct work.
Water-based adhesive will not
leave a residue on the metal after
removal. The polyethylene is highly resistant to tears or punctures.
Satisfy SMACNA guidelines during construction by providing
temporary closures on open ductwork.
Part No. Size Part No. Size
400986 24" x 200' x .002 392514 24" x 200 x .003
392516 48" x 200' x .002 392515 36" x 200' x .003
540 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FLOOR - SURFACE PROTECTION
Ram Board Temporary Floor Protection
A heavy-duty, temporary floor protection
engineered for Contractors. Designed
with cost and efficiency in mind; it lays
out fast and flat and is re-usable. Ram
Board is non-staining and utilizes it's Flex-
Fiber™ technology allowing for the curing
of new floors. It provides the perfect
solution when protecting new or existing
concrete, wood, tile, stone, linoleum, vinyl
composition tile (vct), epoxy, and most
other floor types.
Roll Size: 38" x 100' (317
sq. ft.) Weight (approx.):
48 lbs. Thickness: (approx.)
46 mil. 100% recyclable
and reusable.
Contributes
toward
USGBC
Certified LEED
Points.
Part No. Size
RB38100 38" x 100' roll
Hole In One Covers
• Re-suable / Portable
• Prevents accidents and injuries
• Prevents OSHA citations
• No sawing, pre-drilling or bolting into concrete necessary
• Safety orange color
• Assembly hardware included
• Assembles and removes in seconds
Part No. Size Adjusts to:
1202-4491 7" diameter 2" to 5"
1202-4490 15" diameter 3" to 12"
1202-4493 8" x 15" rectangular 3" x 4" to 3" x 12"
1202-4492 15" x 15" square 4" x 4" to 3" x 12"
Temporary Roof Leak Diverter
• Roof leak diverter collects roof drips and directs them to the
proper drainage area, preventing damage to machinery and
equipment below the leak.
• Connects to a standard garden hose (not included) and is easy
to set up for roof leak.
• Hang the large, vinyl-coated canopy by its 4 corner grommets,
connect the hose and direct it to a designated drainage area.
• Lightweight, vinyl-coated fabric is flame-retardant
Part No. Size
399826 5' x 5' Leak Diverter
Be sure to visit
www.GoNefco.com
for all of your surface protection
and dust control needs
See Pages 541 and 542 for Tapes
541
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TAPES / CABLE TIES
Cable Ties
• Faster - low insertion and pull through force.
• Stronger - high tensile strength achieved from one pice, ad-
vanced pawl and tooth design.
• Purer - manufactured from filtered nylon reducing particle
contaminiation.
• Easier - angled tail provides quicker initial insertion alignment
and tail finger grips allow easier handling and tightening.
• Safer - rounded edges provides added safety and eliminates
insulation damage
• 36" and 48" applications include HVAC duct straps and are
UL 181B listed.
• Call for sizes/styles not listed
Assortment Packs contain 100 pcs. each 4" and 7" and 200 pcs.
11". Available in Natural or UV Black.
Part No. Length (in.) Color
Tensile
Strength
(lbs.)
Pkg.
Qty
Miniature
AL-04-18-9-M 4 Natural 18 1000
AL-04-18-0-M 4 UV Black 18 1000
AL-06-18-9-M 6 Natural 18 1000
AL-06-18-0-C 6 UV Black 18 100
Standard
AL-07-50-9-C 7-1/2 Natural 50 100
AL-07-50-0-C 7-1/2 UV Black 50 100
AL-11-50-9-C 11-1/4 Natural 50 100
AL-11-50-0-C 11-1/4 UV Black 50 100
AL-14-50-9-C 14-1/2 Natural 50 100
AL-14-50-0-C 14-1/2 UV Black 50 100
Heavy Duty
AL-08-120-9-C 8.7 Natural 120 100
AL-08-120-0-C 8.7 UV Black 120 100
AL-14-120-9-C 15 Natural 120 100
AL-14-120-0-C 15 UV Black 120 100
AL-18-120-9-C 18.4 Natural 120 100
AL-18-120-0-C 18.4 UV Black 120 100
Extra Heavy Duty
AL-24-175-9-L 25.2 Natural 175 50
AL-24-175-0-L 25.2 UV Black 175 50
AL-36-175-9-L 37.2 Natural 175 50
AL-36-175-0-L 37.2 UV Black 175 50
AL-48-175-8-L 48.5 Gray 175 50
Assortment Packs
AL-ACTPAC-400-9 Assorted Natural 400
AL-ACTPAC-400-0 Assorted UV Black 400
Electrical Tape All-Weather, Colored Tapes
• 7-mil colored tape with excellent adhesion and elongation.
• Available in 9 colors for identification and marking
• Colored Tapes packaged 10 rolls per sleeve/50 per carton
• Black Tape packaged 10 rolls per sleeve/200 per carton
• Sold per sleeve. (10 rolls)
• UL listed
Part No. Color Part No. Color
UNT34BLK Black UNT34ORA Orange
UNT34BLU Blue UNT34RED Red
UNT34BRN Brown UNT34WHT White
UNT34GRY Gray UNT34YEL Yellow
UNT34GRE Green
3M 764 General Purpose
Vinyl Tape
All Purpose Colored Tapes
• 2” x 36 yards, 5-mil colored tape with ex-
cellent adhesion and elongation.
• Resists scrapes, wear, moisture and most
chemicals Rubber-based adhesive conforms
and seals even on irregular surfaces
• Packaged 24 rolls per case
• Sold per roll
Part No. Color Part No. Color
021200-43185-2 White 021200-43425-9 Red
021200-43450-1 Brown 021200-43452-7 Blue
021200-43438-9 Orange 021200-43429-7 Black
021200-43178-4 Yellow 021200-43435-8 Green
Duct Tape
Two Grades: Utility and Contractor’s
Grade
• Contractor’s Grade is 11 mil
• Utility Grade is 8 mil.
• Waterproof
• Silver
• 2" x 60 yards
Part No. Grade
4137 Contractors
83689 Utility
542 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TAPES / MARKERS
Masking Tapes
Designed for superior performance in
a variety of applications such as paint
masking, holding, light-duty, splicing,
bundling, packaging and many more.
Part No. Size
General Purpose, Yellow
UNT77 3/4 3/4” X 60 yds.
UNT77 1 1” x 60 yds.
UNT77 1-1/2” 1-1/2” x 60 yds.
UNT77 2 2” x 60 yds.
UNT77 3 3” x 60 yds.
Easy Release Painters Tape, Blue
UNT9531-1 1” x 60 yds.
UNT9532-1.5 1-1/2” x 60 yds.
UNT9533-2 2” x 60 yds.
Packaging Tapes
For medium to heavy weight box
sealing, package repair, bundling,
and packages exposed to a wide
variety of shipping hazards and
stress.
Part No. Descriptioin
UNTPPPC Clear, 1.8 mil., 55 yds.
UNT4040C Clear, 2.2 mil. 55 yds.
Teflon Thread Seal Tape
Made of chemically inert material, withstands alka-
lies, acids, oils and solvents. Use on iron, stainless
steel, copper, brass, plastic, glass or rubber pipes.
Part No. Size
50D520TET 1/2” x 520”
75D520TET 3/4” x 520”
2 mil Aluminum Foil Tape with Liner
• For general purpose seaming, patching and
sealing
• Enhances appearance and maintains vapor
barrier integrity
• Excellent adhesion to clean/dry surfaces
• Flame retardant/UV resistant
• Product apps: HVAC duct wrap, protective mask for chemical-
stripping of metal and other surfaces
• 2" and 3" W x 50 yds. long; 16/case
Part No. Size Part No. Size
UNT412 2" x 50 yds. UNT413 3" x 50 yds.
Markers
Welder's Soapstone
For temporary marking of metal surfaces during fabrication. Natu-
ral soapstone provides superior marking. Does not contaminate
welds and is easily removable. 5" x 1/2" x 3/16".
Part No. Description
MKL 80129 Soapstone, 5" x 1/2" x 3/16"
MKL 80140 Soapstone Holder
Carpenter Pencil
Premium quality flat lead for easier marking. Clean, accurate
marks on wood and other surfaces..
Part No. Description
MKL 96928 Carpenter's Pencil
Markal
#500 Lumber Crayons
• Also known as layout chalk or keel
• Standard 1/2" hex shape fits Pe-
terson #106, #108, and #109 holders
• Lead free
• Weather and fade-resistant; marks on cardboard, ceramics,
concrete, lumber, metal, paper, plastics, and rubber
• Packaged 12 of one color per box
• Marking range: –50°F to 150°F
Part No. Color Part No. Color
MKL80320 White MKL80324 Orange
MKL80321 Yellow MKL80326 Green
MKL80322 Red MKL80327 Pink
MKL80325 Blue MKL80328 Purple
MKL80323 Graphite Black MKL80329 Brown
MKL80324 Orange MKL80339 Terra Cotta
MKL80332 Aluminum
Markal Dura-Ink® Markers
• For use on cardboard, wood,
metal, paper, ceramics, glass, and
leather
• Meets Federal Specifications: TT-I-544
• Pack: 12 of one color per box, 48 per case
Part No. Size/Color
MKL96023 Black, #15 Fine Point
MKL96923 Black #80 Medium Point
MKL96913 Black #100 5/8" Block Point
543
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MARKERS / PAINTS
Markal Valve Action Paint Marker
• Marks with real paint, dries in 3 minutes
• Valve action nib releases paint as needed for continuous
marking
• Marks on all surfaces including: metal, wood, glass,
plastic, rubber, cardboard, and paper
• Lead-free, low halogens
• Replaceable nib to assure complete use of each marker
• Durable metal barrel
• Meets California VOC Regulations
• Pack: 12 per box, 48 per case
Part No. Color Part No. Color
MKL96820 White MKL96823 Black
MKL96821 Yellow MKL96825 Blue
MKL96822 Red MKL96826 Green
Markal PaintStix®
Real paint in stick form
• Real lead-free paint in stick form
• For use on metal, wood, plastic,
concrete, rubber, glass, card-
board, and paper.
• Marks on smooth, rough, rusty or
dirty surfaces and also marks through oil and water.
• Standard size: 11/16"
• Temperature range: -50°F to 150°F
• Marks on any material, surface or texture
Part No. Color Part No. Color
MKL80220 White MKL80227 Pink
MKL80221 Yellow MKL80228 Purple
MKL80222 Red MKL80229 Brown
MKL80223 Black MKL80230 Gray
MKL80224 Orange MKL80231 Gold
MKL80225 Blue MKL80232 Aluminum
MKL80226 Green
Performance Industrial Enamels
Aerosols
15 - 20 oz fill weight:
Very high solids - fast dry premium industrial
coatings
Part No. Color Part No. Color
RUS2115 Silver Aluminum RUS2169 Red Primer
RUS2117 Brightly Galvanized
Compound RUS2182 Gray Primer
RUS2185 Cold Galvanizing
Compound RUS7086 Quick Dry Gray
Primer
RUS2123 Light Blue RUS2171 Tan
RUS2124 Safety Blue RUS2175 Chestnut Brown
RUS2125 Deep Blue RUS2176 High Temp Black
RUS2134 Bright Green RUS2178 Flat Black
RUS2137 Dark Green RUS2179 Black
RUS2143 Safety Yellow RUS2183 Lt. Machine Gray
RUS2155 Safety Orange RUS2187 Dk. Machine Gray
RUS2156 Equipment
Orange RUS2192 Gloss White
RUS2163 Safety Red
Call for complete listing of colors available
Rust-Oleum®
Overall® Economical
Aerosols - 10 oz
Value Line
Quik-Mark™
Inverted Marking Paints
• High solids formulation for bold, bright, visible markings
• Fast-drying, high-solids formula penetrates and
adheres to hot surfaces
• Convenient Spray-Thru™ cap and non-clogging spray tip
• VOC compliant, free-of-lead hazards
Part No. Color Part No. Color
KRYS03401 Brilliant White KRYS03407 Brilliant
Green
KRYS03402 Brilliant Yellow KRYS03408 Fluor. Orange
KRYS03403 Brilliant Orange KRYS03409 Fluor. Red
KRYS03404 Brilliant Red KRYS03410 Fluor. Red/
Orange
KRYS03405 Fluorescent Pink KRYS03500 Clear
KRYS03406 Brilliant Blue K08360 Marking Wand
Call for complete listing of colors available
Part No. Color Part No. Color
RUS2401 Sandable Gray
Primer RUS2409 Yellow Gloss
RUS2402 Black Gloss RUS2410 Green Gloss
RUS2403 White Gloss RUS2411 Brown Gloss
RUS2404 Black Flat RUS2412 Aluminum
RUS2405 White Flat RYS2413 Machine Gray
RUS2407 Red Gloss RUS2414 Orange Gloss
RUS2408 Blue Gloss RUS2416 Red Primer
Call for complete listing of colors available
544 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PAINTS / CAULK
Part No. Color
K08340 Walk Behind Striping Cart
K08300 White Striping Paint
K08301 Yellow Striping Paint
K08302 Blue Striping Paint
K08303 Red Striping Paint
Striping Products
Pavement Striping Machine
• 7” wheels provide a smooth ride on hard
surfaces, such as concrete, blacktop and metal
• Excellent for use in parking lots, warehouses,
plants, factories, etc.
Line-Up® Pavement Striping Paints
• Fast drying
• Long-lasting durability on outdoor pavement
and indoor surfaces
• Non-clogging spray tip
• VOC compliant, free-of-lead hazards
Striping Wand for Striping Paint
Part No. Description
KRYK0360 Wheeler Hand-Held Wand (34" Length)
• Constructed of durable, rugged plastic and
lightweight steel
• Comfortable pistol grip for easy handling
and marking
• Apply a uniform, 1" to 1-1⁄2" width of paint
SU5005
100% RTV Silicone
Rubber Adhesive/Sealant
SU5005 is a general purpose, high quality 100% RTV acetoxy
silicone used for the adhesion of glass, most woods, metal,
ceramics, porcelain, synthetic rubbers and many plastics.
SU5005 is a “Food Grade” silicone with the following approvals:
NSF Standard 51, FDA 21-CFR-177.2600, USDA Rating P1,
UL, Mil-A-46106A, TTS-001543A and TTS-00230C, ASTM C
920-87. Service temperature range: -80°F to 400°F. Intermitten
temperature limit of 500°F. Available colors: Clear, White,
Aluminum, Black, Bronze, Blue and Almond. Special colors
available.
SU5005
Red High Temperature
RTV Silicone Adhesive/Sealant
SU5005 Red High Temperature silicone is used in identical
situations as the standard SU5005 and carries the same
approvals.
Service temperature range is -80°F to 500°F. Intermittent limit of
600°F.
SU6000-40
Polyurethane Adhesive/Sealant
SU6006-40 is a diverse polyurethane sealant used in concrete
and metal/metal applications.
The SU6000-40 is a paintable sealant used in joints of vehicles-
truck bodies, window sills, rail cars, mobile homes, and related
products. Offers excellent adhesion and elasticity to joints subject
to vibrations, stress, expansion and contraction. Colors available:
white, black, bronze, and gray. Special colors available. Meets
TTS-00230C, ASTM 920-87, USDA and FDA specifications.
SU3000
Siliconized Acrylic Latex Paintable Caulk
SU3000 is a premium 25 year siliconized caulk used in various
indoor and outdoor applications with excellent adhesion to
aluminum, wood, concrete, glass, ceramic tiles, etc.
SU3000 can be painted with latex or oil-based paints. Mildew
resistant, non-yellowing. Meets ASTM C-834-91 specifications.
Colors available: white. Special colors available.
Skeleton Caulking Guns
41001
• 1/10 gallon
• Uni-rail construction
• Hex piston
• Fits standard cartridges
• Heavy duty - long life
10.1 oz
and quart guns
available
545
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PAINTING SUPPLIES / BRUSHES
Pure White China Bristle Brush
Beaver Tail Handle
Black Plastic Handle
Trim Std.
Width (in) Thickness (in) Length (in) Pkg. Part No.
1/2 1/4 1-3/4 12 70067
Pure White Bristle Round Marking Brush
Long Plain White Handle
Trim
Size Thickness Length Std. Part No.
(Inches) (Inches) Pkg.
6 9/32 1-1/8 12 74035
Pure Black China Bristle
Oval Sash Tool Brush
Natural Plastic Handle
Trim
Thickness Length Std.
Size (Inches) (Inches) Pkg. Part No.
6 7/8 2-1/8 12 70093
Pure Gray Bristle Brush
Black Plastic Kaiser Handle
A Good Chip And Oil Brush
Trim Std.
Width (in) Thickness (in) Length (in) Pkg. Part No.
2 7/16 2 12 71108
Economy Pure White
Bristle Brushes
Trim Plastic Wood
Width Thickness Length Std. Handle Handle
(Inches) (Inches) (Inches) Pkg. Part No. Part No.
1 5/16 1-1/2 72 86016
1-1/2 5/16 1-1/2 72 86017
2 5/16 1-1/2 72 86004 86018
3 3/8 1-1/2 48 86006 86019
Economy Synthetic Paint Brush
Red Plastic Handle
Trim Std.
Width (in) Thickness (in) Length Pkg. Part No.
2 5/16 1-3/4 72 86024
Horsehair Tin Ferrule
Acid Brush
Trim Std.
Width (in) Thickness (in) Length (in) Pkg. Part No.
3/8 7/8 6-1/8 144 74060
Parts Cleaning Brushes
Pointed Top — Handy Tool for
Cleaning Motor Parts
Trim Std.
Size Diameter (in) Length (in) Pkg. Part No.
Gray Tampico
10 1-1/16 12 73028
Stiff Pure China Bristle*
1-1/2 2-3/8 12 70115
Metal Paint Tray
Rustproof steel with ladder-lock
legs. Accommodates 7” or 9”
rollers. Holds up to 3 quarts.
Part No. Desc
85033 Metal Paint Tray
Plastic Paint Tray Liner
Makes clean-up easy. Fits most
standard trays
Part No. Desc
RM410 Paint Tray Liner
Roller Frames and
Covers
Heavy-duty 9" Roller Frame
with 5/16" dia. metal frame
features two plastic caps,
a five-wire cage and a solid
plastic handle with a threaded
grip. 9" Paint Roller Covers:
100% synthetic fiber (3/8” nap)
attached to a 3-ply phenolic
core backing works well with
all paints. 4" Roller Frame with
1/4" dia. metal frame measures
23"L. 4" Polyester Covers
work well for latex paints. 4"
Polyester Cover is especially
suited for wall and floor edging
and line painting. Great for
driveway and aisle markings.
Part No. Desc
99076890 9" Roller Frame
99748540 9" Roller Frame
9TU038 9" Roller Cover
9SC038 9" H.D. Roller Cover
4SC038 4" H.D. Roller Cover
See Roofing Supplies - Pages 590 -595
Chip Brushes
Forawiderangeofprojects.Economywhite
bristle.
Part # Size Thickness Trim
89695 1/2" 1/4" 1-1/2"
89696 1" 5/16" 1-1/2"
89697 1-1/2" 5/16" 1-1/2"
89698 2" 3/8" 1-3/4"
89700 3" 3/8" 1-3/4"
89701 4" 3/8" 1-3/4"
89702 4" 11/16" 2-1/2"
ROOFERS
CHOICE
546 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MATERIAL LIFTS
Models 2124, 2118 and 2112
1. Cable Safety Brake
Each mast and carriage can have a factory installed, gravity actuated
safety brake which holds loads in place in the event the cable should go
slack
2. Fork Extensions (No. 783535)
With the push of a button, forks may be extended from 28” to 42".
With longer forks, the weight capacity decreases to 200 lb. and is
clearly shown on the forks when extended. A second button returns the
extension for convenient storage inside the forks
3. Boom Carriage (No. 783642)
Ideal for installing pipe or lifting “from the top” applications. Uses four
attaching plunger pins and has a 40" reach. Hook has five locations and load capacity
decreases the farther out the boom is extended (from 650 lb. to 200 lb.)
Series 2100 Contractor Lift Specifications
Dimensions 2112 2118 2124
Height - stowed 84" 84" 84"
Length - stowed 34" 34" 34"
Height - operating 84" 84" 84"
Length - operating 62" 73" 73"
Base width 31.25" 31.25" 31.25"
Width with stabilizer legs 74" 74" 74"
Ground clearance 2.5" 2.5" 2.5"
Load height (minimum) 6" 6" 6"
Maximum height (forks down) 11’1" 16’6" 21’11"
Maximum height (forks up) 13’1" 18’6" 23’11"
Standard Fork width 21.5" 21.5" 21.5"
Standard Fork length 28.0" 28.0" 28.0"
Weight
Net weight 252 lb 321 lb 366 lb
Load Capacity
Load capacity, 14" load center 650 lb 650 lb 650 lb
Load capacity, with fork
extensions 200 lb 200 lb 200 lb
Fork Specification
Standard fork width 21.5" 21.5" 21.5"
Standard fork length 28" 28" 28"
Fork length with extensions 42" 42" 42"
Fork weight 32 lb 32 lb 32 lb
Fork weight with extensions 38 lb 38 lb 38 lb
This catalog is comprised mostly of items we carry in stock.
NEFCO adds new items to its inventory regularly.
If you need an item that is not listed in this catalog, call us.
If we don’t have the item, it may be possible to special order it.
547
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MATERIAL LIFTS / CARTS
EL-405 Stacker Lift
• 400 lb. lifting capacity
• 53" lifting height
• Two speed winch handle position
• Quick action wheel brake
• Large lifting surface
• Ideal, adjustable work platform for
repair shops
• Great for loading customer vehicles
• Large lifting tray - 24" x 28"
• Quick action retention strap holds lift on tray.
Strap features retractor to house loose strap
and seat belt style push-button release and
ratchet tightening mechanism.
Part
No. Description
784650 EL-405 Stacker Lift
Cylinder Carts with Lifting Eye & Fire-Rated Wall
Medium Range, High Rail Cylinder Cart
(Model #209)
Ideal for handling two tanks (a 244-330 cu. ft. oxygen and
a 145 cu. ft. acetylene 9-1/4" diameter tank). High rail de-
sign contains cylinders while moving about job sites. This
cart comes with 9 x 18" base plate, a large, open tool tray
and 14" steel wheels as standard equipment.
Full Range, High Rail Cylinder Cart
(Model #213)
The high rail feature secures tanks on to the cart while
moving around job site situations. Full range cart holds
one 244–330 cu. ft. (9-1/4") oxygen tank and one 210–
420 cu. ft. (13-1/2") acetylene tank. Equipped with 13 x
25" base plate, a large, open tool tray and 16" pnuematic
wheels as standard equipment.
Part
No. Description
782441 Model 209-14S-LE Lifting Eye & Divider Wall
782493 Model 209-16P-FW-LE Lifting Eye & Fire-Rated Wall
Part
No. Description
782493 Model 213-14S-LE Lifting Eye & Divider Wall
782495 Model 213-16P-FW-LE Lifting Eye & Fire-Rated Wall
Fire-Rated Wall complies with OSHA 1926.350 & OSHA 1910.253
209-14S-LE 213-14S-LE
548 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CARTS
Heavy Duty Utility Cart
Heavy duty utility cart with
optional shelf
Now... 2 Styles to Choose From
Ergonomically designed push handle
provides optimum hand placement and push
height improving control and worker safety
Molded-in storage compartments, holsters,
hooks, and notches
4520-88 New Handle Style
Perfect for transporting materials, supplies, and heavy loads in
almost any environment. 500 lb. capacity
• Ergonomically designed push handle provides optimum hand
placement and push height improving control and worker safety
• Molded-in storage compartments, holsters, hooks, and notches
• Molded-in customize-able fittings
• High density structural resin construction
• Easy-access bottom shelf
• Best-in-class casters to meet the most demanding
environments
4520-89 Original Flat Top Style
• No sharp edges to damage walls or furniture
• 5” rubber casters for quiet movement
• Easy to keep clean and sanitary
• No painting or maintenance required. 400 lb. capacity
• Optional middle shelf available
P/N Description
4520-88 New Style 36" x 24" Utility Cart w/ ergonomic
handles
4597-88 Optional Shelf for 4520-888 Utility Cart
4520-89 Original 36" x 24" Utility Cart
4598-G88 Optional Shelf for 4520-89 Utility Cart
Versatile, durable carts
perform a wide variety of
tasks.
• Easy-to-clean smooth
surfaces.
• Quiet casters and plastic
construction help eliminate
noise.
• User-friendly easy to grip
handles.
• Large 4" non-marking
swivel casters.
• High style appearance
with brushed aluminum
uprights.
• 200 lb. weight load.
Rubbermaid tilt trucks are easy to maneuver, allowing for
quick collection and dumping of materials. Smooth, seamless
construction resists pitting and corrosion. Easily cleaned using
water or high pressure steam. All welded tubular frame assembly
offers maximum strength with minimum weight. Trucks are Gray
and optional lids are available.
Tilt Trucks
P/N cu.
yd. Gal Wt.
Cap. L x W x H Wheels
#1304 1/2 100 300 52.5" x 27" x 37.5" 10" semi-
pneumatic
#1314 1 200 750 70.25" x 32" x 42" 12" semi-
pneumatic
#1317 Lid for #1314 Cart
#1025 1.5 303 1000 84" x 42.5" x 50" 12"
vulcanized
#1035 2 404 1800 84" x 46" x 50.5" 12"
vulcanized
#1046 2.5 505 2300 84" x 55" x 50.5" 12"
vulcanized
Light Duty Utility Cart
P/N Description
3424-88 Light Duty Cart, 16.25" x 31.5" x 36"H
549
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
GARBAGE CANS
Big Wheel™ Container
Brute® receptacles are designed for refuse, food and material
handling. Specially formulated resin resists most acids and
chemicals. Withstands sub-zero temperatures and its seamless
construction makes for easy cleaning, even steam cleaning!
The all-plastic construction won’t rust, chip, peel, dent or crack.
A double-ribbed base provides increased stability and dragging
capacity. Molded base grip allows secure two-handed lifting. The
reinforced rim provides added strength and durability. Optional
rugged twist on/off dolly adds mobility to the Brute® receptacle.
Round dolly features 5
casters for extra stability.
Fit 20, 32, 44 and 55
gallon Brute® receptacles.
Choose from flat lids (for
10, 20, 32, 44 and 55
gallon), dome tops (for
32, 44 and 55 gallon) or
funnel top (for 32 gallon)
receptacles. White and
Gray brutes are NSF and
USDA listed. Complies
with FDA regulations.
Please specify color when
ordering.
Husky™ Trash Bags
The best bag for the best price.
Big Wheel™ container holds 65 gallons
and has the advantage of built-in wheels,
making it a convenient way to collect
and transport trash — even up and
down stairs. Built-in handles for easy
maneuverability. 8” Wheels, choose from
blue, yellow and gray. Optional “we
recycle” imprint available.
Part No. Description
10 Gallon round brute container and lid:
2610 Container, white or grey,
15-5/8” dia x 17-1/8” H
2609 Flat lid, dark. grey, white
20 Gallon round brute container and lid:
2620 Container, white, grey, yellow, blue,
19-1/2” dia x 22-7/8” H
2619-60 Flat lid, grey, white, yellow
32 Gallon round brute containers, tops and lids:
2632 Container, all colors available,
22” dia x 27-1/4” H
2631 Flat lid, all colors available
2637-88 Dome top lid, all colors available,
22-11/16” dia x 12-1/4” H
44 Gallon round brute containers, tops and lids:
2643 Container, all colors available
24” dia x 31-1/2” H
2645-60 Flat lid, all colors available
2647-88 Dome top lid, all colors available,
24-13/16” dia x 12-19/32” H
55 Gallon round brute container, top and lid:
2655 Container, gray only, 22” dia x 27-1/4” H
2654 Flat lid, gray only
2657-88 Dome top lid, all colors available,
22-11/16” dia x 1-3/8 H
2640 Round conversion dolly
Part No. Description
9W21 Big Wheel™ container — no lid
9W27 Big Wheel™ — with lid (50 Gal.)
Case/ Case Net
Part No. Capacity Mil Count Pallet Weight Plt. Wt.
PA2042HB 42 Gallon 3.00 20 84 6.33 532
PA3232HB 42 Gallon 3.00 32 63 10.14 639
HKHW250B 42 Gallon 3.00 50 48 15.84 760
HK450548M 45 Gallon 1.00 54 93 6.16 572
Funnel Top
(Grey Only)
Dome Top
(Gray, Orange or Red)
Container (Gray, White,
Yellow or Red)
Conversion Dolly
(Black)
Domed Lid converts
a 32, 44 and 55
gallon container into
a rugged outdoor
receptacle.
Reinforced Rim for
added strength and
durability
Double-ribbed base
increases stability
and dragging
capacity
Round Brute® Receptacles
550 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MOPS
Brute® Mop Bucket
• Large 26-35 U.S. quart capacity
• Ergonomic design.
• Contoured bail.
• Large pour spout and rear handle are
designed to make emptying easier.
• Contoured graduation markings
indicate both quarts and liters.
• Please specify brown or yellow.
Part No. Description
2EX-1004 Brute® Mop Bucket
2EX-1005 EZMT® Mop Bucket with foot-operated drain mechanism
Mopping Combo Packs
Part No. Description
22EX-0163 Brute Bucket & Side Pressure Wringer
2EX-1006 EZMT® Brute Bucket & Side Pressure Wringer
2EX-1007 Brute Bucket & Downward Pressure Wringer
2EX-1008 EZMT® Brute Bucket & Downward Pressure Wringer
Round & Double Pail Buckets
Designed for everyday use. Available
in 10 qt. and 14 qt. sizes, gray only.
Double pail buckets allow cleaning
solution and rinse water to be carried
in the same bucket. Great for on the
spot cleaning. Available in 17 qt and
19 qt sizes. Gray only.
Part No. Description Part No. Description
2EX-0139 Round 10 qt bucket 2EX-0104 Dbl. pail 17 qt
2EX-0103 Round 14 qt bucket 2EX-0108 Dbl. pail 19 qt
Value Pro™ Cut End Mops
General, all-purpose mops feature a
4-ply cut-end cotton yarn for higher
absorbency. Headband size is 5”. Available
in 16 oz, 20 oz, 24 oz, and 32 oz. Rated the
most economical mop with a good cut-end.
Part No. Description Part No. Description
2EX-0046-16 16 oz 2EX-0046-20 20 oz
2EX-0046-24 24 oz 2EX-0046-32 32 oz
Part No. Description
2EX-0431-06 Sponge Mop
2EX-0431-12 Replaceable Sponge Head
Steel Roller Sponge Mop
Front pull lever on the handle operates
solid steel rollers, squeezing liquids from
the mop without using a traditional wringer.
Replaceable 12” cellulose mop heads
available.
Metal Mop Handles
Spring Grip allows for changing of
wide band mops .Zinc plated for
rust resistance. 60” long with wood
handle. Available with either wood
or steel handle.
Part No. Description Part No. Description
2GF-0023 Spring Grip 2GF-0020-91 Janitor 54” steel
2GF-0018-64 Janitor, 54” wood 2GF-0020-94 Janitor 63” steel
2GF-0018-63 Janitor, 63” wood
Mop Handles
Invaderr® handle’s hinged side gate allows entire mop to easily
slide on and off. A thumb wheel clamps the mop firmly in place.
Lightweight, rust-proof mop handle won’t chip, crack, peel or fade
even after prolonged use. Available in 60” hardwood or aluminum.
Place a mop between the jaws of the Gripper® wet mop handle, screw
the collar tight and you have a handle that holds your mop firmly and
securely. Available in 60” hardwood, aluminum or vinyl clad aluminum.
Part No. Description
2EX-0536-16 60” Invader, hardwood
2EX-0536-26 60” Invader, aluminum
2EX-0535-16 60” Gripper, aluminum
2EX-0535-36 60” Gripper, aluminum, vinyl-clad
Invaderr® Gripperr®
551
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BROOMS
Strip Broom Handles and Braces
Wooden handles are made of smooth lacquered hardwood.
Metal screw tip easily attaches to push brooms.
Standard Handle Brace fits on underside of handle
between handle and block. Attaches easily with wing nuts.
Reusable.
Heavy Duty Handle Brace - Sturdy, reusable steel brace
clamps around handle and fastens to block with screws.
Part No. Length Diameter Type
89889 60" 15/16" Wood Handle
89891 60" 1-1/8" Wood Handle
89921 Standard Handle Brace
89922 Heavy Duty Handle Brace
Floor Sweeps - Strip Brooms
89921 89922
Push Broom - Fine
Sweeping - Silver Line
• Silver flagged-tipped plastic bristle. 3" trim.
For sweeping smooth, highly polished
floors and smooth concrete. Sweeps even
the finest dust or grit. Two threaded holes.
Part No. Block Size
89230 18"
89231 24"
89224 30"
Push Broom - Medium
Sweeping - Black Tampico
• Black Tampico bristle., 2-5/8" trim.
For all-purpose sweeping of medium-
to-heavy soil and debris. Use on wood,
concrete and semi-rough floors. A rugged
brush for dry, wet and oily surfaces.
Part No. Block Size
89249 18"
89252 24"
89255 30"
Push Broom - Medium
Sweeping
Black Polystyrene (Synthetic)
• Black synthetic bristle. 3" trim.
For all-purpose sweeping of medium-to-heavy
soil and debris. Use on wood, concrete and
semi-rough floors. Solvent resistant.
Part No. Block Size
89273 18"
89274 24"
Push Broom - Coarse
Sweeping - Palmyra
• Palmyra bristle. 4" trim.
Excellent for sweeping extra-heavy dirt,
debris, gravel, chips, etc. Use on rough,
dry, wet, oily or greasy surfaces.
Part No. Block Size
89322 24"
89324 30"
Street & Highway Broom
Bass/Palmyra mix fill for either wet or
dry sweeping or brown plastic fiber with
flared ends, will outlast most natural fibers.
Handle sold separately.
Part No. Description
89345 6-1/4" Bass/Palmyra Fill
89348 5-1/4" Plastic Fill
89897 Tapered wood handle
Corn Broom
Selected corn filament for light
sweeping on smooth floors.
Compact broom with 3 twine
sews and wire band for long
life.
Part No. Description
89377 Corn Broom
Whisk Broom
Metal cap with hanging ring. Selected corn
filaments for use on dust, lint and fine dirt
in office, factory or home.
Part No. Description
89378 Whisk Broom
Dust Pans
Gray plastic dust pan is durable,
lightweight and will not dent. Black metal
dustpan is 20 ga. steel with enamel finish
Part No. Description
89875 Plastic Dustpan, 12" edge
89876 Steel Dustpan, 12" edge
89876
Steel
89875
Plastic
See Next Page for Sweeping Compound
552 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SQUEEGEES / BRUSHES
Deck Scrub Brush
Heavy duty scrubbing on concrete floors,
carpeting, boats, rough wood floors, etc.
Brown palmyra fill. 6 x 18 rows.
Part No. Description
89514 10" Deck Scrub Brush
89515 12" Deck Scrub Brush
89897 Tapered Wood Handle
Pot & Fender Brushes
For general purpose scrubbing and
industrial use on metal surfaces,
specifically cans, auto fenders, wheel
covers, hub caps, etc. Choose pamyra fill
for more aggressive cleaning and Tampico
fibers for less abrasive cleaning. Available
with either long handle or short.
Part No. Description
89447 2" Tampico trim, 10" Handle
89443 2" Tampico trim, 21-1/2" Handle
89445 2" Palmyra trim, 10" Handle
89440 2" Palmyra trim, 21-1/2" Handle
Counter Brushes
Counter Dusters in two grades (Heavy Duty
and Premium) for convenient light cleaning
and sweeping of small flat surfaces such as
counters, table tops and work surfaces. 8"
Overall length, 2" Trim. Wood Block
Part No. Description
Premium Line - Fine Sweep
89390 Black horsehair
Heavy Duty Coarse
89402 Black tampico
Floor Squeegee
Premium performance squeegee features
superior construction and heavier blade for
industrial use.
Part No. Length
89473 18" Straight
89474 24" Straight
89475 30" Straight
89476 36" Straight
89478 24" Curved
89479 30" Curved
89480 36" Curved
89897 54" Tapered Wooden Handle
Window Squeegee
Angle type front. Plated steel frame and
handle socket. Red Gum blade (1"W x 3/16"D)
securely fastened with machine screws.
Part No. Length
89465 8" window squeegee
89467 12" window squeegee
89491 8" replacement blade
89476 12" replacement blade
Window Squeegee Pole
Fiberglass professional quality extension
pole. Fiberglass housing with aluminum
extension. 4' - 8' reach.
Part No. Description
89913 Window Squeegee Pole
Squeegees
Sweeping Compound
Dust absorbing fiber based material is available in an oil-
based or water based (wax) product for use on concrete or
wood floors. Will not mat down or cling to brush or floor.
Part No. Description
397138 65#/15 Gal. Boxed, Oil Based Green
400867 70#/15 Gal. Drum, Oil Based, Green
197556 100# Drum, Oil-Based, Green
400869 70#/15 Gal. Drum, Water Based Green
82037 50# Bag, Water Based, Green
Brushes
Three Knot Roofing Brush
For applying roof and
foundation coatings.
6-1/4" wood block.
3-1/2" Tampico
filament trim. Requires
tapered wood pole
handle. For use with
hot or cold coatings..
Part No. Description
89800 Roofing Brush
89897 Tapered Wood Handle
Masonry Brushes
White tampico fiber set
into hardwood block.
Extra heavy fill, handle
attached.
Part No. Description
89808 6" Block, 2 rows, 3" trim
89814 6-1/2" Block, 5 rows, 3-7/8" trim
Sweeping Compound
553
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BROOMS
Wire Brush w/Scraper
Heavy duty scratch brush has curved wood
handle and steel scraper attachment. 3 x
19 carbon steel wire rows. 13-3/4" x 5/8".
Brush part 6-1/4" L. Trim length 1-3/16".
Part No. Description
85003 Scratch brush w/scraper
Shoe Handle Wire Brush
Effective for cleaning pipe threads and
welds. Also for removal of rust, paint, dirt
and debris. 4 x 16 carbon steel wire rows.
10-1/4" x 1-1/8". Brush part 5" L. Trim
length 1-3/16".
Part No. Description
85033 Shoe handle wire brush
Block Wire Brush
Excellent for cleaning concrete forms. 6 x
19 carbon steel wire rows. Width: 2-1/4".
Brush part 7-1/4" L. Trim length 1-3/4".
Part No. Description
85082 Block wire brush
Curved Handle Wire Brush
Heavy duty scratch brush has curved wood
handle. 3 x 19 carbon steel or stainless
steel wire rows. 13-3/4" x 5/8". Brush part
6" L. Trim length 1-3/16".
Part No. Description
85045 Carbon steel fill
85047 Stainless steel fill
Small Cleaning Wire Brush
Solid bent hardwood block, excellent for
spot cleaning small welds. 3 x 7 wire rows.
7-1/2" x 1/2". Brush part 1-1/2" L. Trim
length 1/2".
Part No. Description
85054 Carbon steel fill
85055 Stainless steel fill
85056 Bronze wire fill
Wire Scratch Brushes
Be sure to visit
www.GoNefco.com
for the latest Tools, Products
and Special Offers!
Sand-Light™ Abrasive Hand Pads
Brown
Primary application: Ferrous and/or Non-Ferrous metals
• Heavy duty
• Excellent for removing heavy rust and cleaning welds
Maroon
Primary application: Ferrous and/or Non-Ferrous metals
• General purpose
• For removing light rust
• Excellent for cleaning and brightening
Black
Primary application: Stainless Steel
Secondary application: Ferrous and/or Non-Ferrous metals
• For blending and finishing
• Excellent for paint removal
Green
Primary application: Ferrous and/or Non-Ferrous metals
Secondary application: Paint, Varnish
• General cleaning
• Excellent for stripping paint and varnish
Gray
Primary application: Non-Ferrous metals
Secondary application: Wood
• Ultra fine
• For light finishing
• Excellent for sanding before/between finish coats
White
Primary application: Fiberglass, Vinyl, Plastic, Formica
Secondary application: Ceramic
• Light duty
• For light cleaning and polishing
COMPARE TO 3M
SCOTCH-BRITE™ PADS!
Size Grade Color Part No. Qty X-Ref
6" x 9"
Heavy Duty Brown 77440 20 3M-7440
Gen. Purpose Maroon 77447 20 3M-7447
Stainless Black 77446 20 3M-7446
Stripper Green 77496 20 3M-96
Ultra Fine Gray 77448 20 3M-7448
Light Duty White 77486 20 3M-7445
554 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CLEANERS
Fantastik Cleaner
All-purpose spray-on
cleaner. No rinsing
required. Non-abrasive. 32
oz. spray bottle. 12/case.
Part No.
94368
Mean Green
Mildew
Destroyer
Removes mildew, soap
scum, grime and algae.
Environmentally safe.
Professional strength.
Non-abrasive. 32 oz. spray
bottle. 12/case.
Part No.
483-600
Hydroforce
Industrial
Strength Cleaner/
Degreaser
Effectively penetrates and
lifts heavy deposits of
grease, oil and dirt. Can
be used full strength or
diluted. Biodegradeable,
non-flammable and low-
foaming. Can be used
in pressure washing
applications.
Part No. Description
14407 30 oz. bottle, 12/case
14416 1 gal. bottle, 4/case
14417 5 gal. pail, 1/case
Simple Green
Cleaner/Degreaser
Water-based cleaner/
degreaser that may be used
full strength or diluted. Mild
pH. Exempt from OSHA
or EPA requirements for
special handling or personal
protection.
Part No. Description
19024 24 oz. bottle, 12/case
19128 1 gal. bottle, 4/case
19005 5 gal. pail, 1/case
CRC Heavy Duty
Degreaser
Removes most industrial
soils. Non-flammable,
chlorinated solvent
evaporates rapidly and
dries residue free; use on
industrial and electrical
equipment. Suitable for any
application permitting the
use of chlorinated solvents
and not involving sensitive
plastics. 19 oz. aerosal can. 12/case.
Part No.
03095
CRC Mechanix
Orange™ Citrus
Lotion Hand
Cleaner with
Pumice
Fast, gentle, pH balanced;
orange scent. Cleans away
tough dirt and grime with
pumice and the natural
cleaning powder of citrus.
Fortified with glycerine
and aloe vera. 16 oz.
squeeze bottle. 12/case
Part No.
SL1712
CRC Sunswipe™ Sunscreen
Towelette
Protects skin from the
sun’s harmful UVA,
UVB and IR rays.
12” x 12” towelette
pre-moistened with
powerful sunscreen
and soothing Aloe
Vera. Fortified with
vitamins E, A and D.
144/case
Part No.
14012
Scrubs® Hand Cleaner Towels
Scrubs® pre moistened towels get your
hands clean and leave them conditioned
and protected anywhere that you are
working. 12/case.
Part No.
DYK42272
Windex Glass
Cleaner
Windex Blue with Ammonia
for fast, streak-free
cleaning power. May
also be used for cleaning
appliances, porcelain, tile,
chrome as well as glass.
Part No. Description
90139 32 oz. spray
bottle, 12/case
90940 1 gal. refill,
4/case
Formula 409
Cleaner
All-purpose spray-on
cleaner and degreaser.
No rinsing required. Non-
abrasive. 32 oz. spray
bottle. 12/case.
Part No.
35293
Liquid Bleach
Sodium hydroxide
for cleaning and
disinfecting.
Manufacturer may vary.
1 gallon jug.
Part No.
226211
555
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CLEANERS / LUBRICANTS
Scrubs® Stainless Steel
Cleaner Towels
Clean, polish, brighten
and protect all in one
step. This powerful
formula prevents water
marks and corrosion and
preserves the high luster
of stainless steel. They
are ideal for bathrooms,
drinking fountains,
elevators, kitchens and
more. 9.75" x 10.5"
towelette. 30/container.
6/case.
Part No.
DYK91930
Baking Soda
Environmentally safe.
Use as acid neutralizer,
deodorizer, non-abrasive
cleaner and laundry
additive. 16 oz. box
Part No.
257809
CRC Compressed Air
Plastic safe, non-
flammable, cleans
without wetting surface.
Provides a powerful
blast that removes dirt,
dust and light debris
from any surface. Quick
maintenance product
requiring no dry time.
Excellent for removing
debris from cracks and
joints on non-moveable
equipment. 8 oz. aerosol.
Part No.
14085
Lysol Disinfectant
Spray
Disinfectant and odor
neutralizer. Kills household
germs that cause odors on
surfaces. 12 oz. aerosal can.
12/case
Part No.
04650
CRC Wasp &
Hornet Killer Plus
High strength insecticide
shoots over 20 feet, stinging
carouse insects on contact.
Contains no chlorinated
solvent, harmless to plastics.
High dielectric strength of
31,7000V. 20 oz. aerosal
can. 12/case
Part No.
14010
WD-40 Lubricant
Formulated for ultrahigh surface attraction
to metal. Displaces surface moisture and
establishes a protective barrier. Provides
rust and corrosion protection. Penetrates
to loosen rusted or frozen parts. Cleans
dirt, grime, grease and oil. Excellent
lubricating properties. Silicone-free,
clean-to-use and leaves no messy, gummy
residue. Available in 2 or 12 oz aerosols
and, 1, 5 or 55 gallon containers.
Part No. Description
WD403 3 oz. Aerosol, 24/cs
WD408 8 oz. Aerosol, 12/cs
WD4011 11 oz. Aerosol, 12/cs
WD4016 16 oz. Aerosol, 12/cs
WD40GAL 1 Gal. Refill WG94
WD405GAL 5 Gal. pail
Tri-Flow Lubricant
Premium petroleum
oils, extreme pressure
additives, corrosion
inhibitors and Teflon
combine to result in a
dramatic decrease in
friction and wear even
under the most severe
pressure and abrasive
conditions. Penetrates
to displace, clean
and lubricate. Teflon
rejects dirt, dust, sand
and other abrasive
foreign particles.
Part No. Description
TF20025 6 oz. pump bottle
TF20027 12 oz. aerosol
CRC 2-26 Multi-
Purpose Precision
Lubricant
Versatile, plastic safe, multi-
purpose precision lubricant,
penetrant and corrosion
inhibitor, Suitable for steel,
copper, brass and aluminum
alloys. Displaces moisture
and leaves a thin, long
lasting film to protect against
corrosion. 16 oz. aerosol
can. 12/case.
Part No.
02005
CRC Cutting Oil
Superior thread cutting
lubricant for use on ferrous
and non-ferrous metals;
including brass, copper and
aluminum. Sulfur free, low
odor formula is compatible
with any manual or motor
driven thread cutting tool.
Clings tightly to vertical
surfaces. 16 oz. aerosol can.
12/case.
Part No.
14050
CRC Screwloose
Industrial strength, low
viscosity lubricant and
penetrant designed to
quickly loosen and free
seized, bound or frozen
fasteners. Pure clear
formula contains no messy
dyes to clean-up. Eases
the disassembly of plant
machinery, tools and
equipment. 11 oz. aerosol
can. 12/case.
Part No.
030360
556 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIPERS / RAGS / PAPER PRODUCTS
Bathroom Tissue
Soft, absorbent, 2-ply bathroom tissue.
Safe for sewer and septic systems. 500
sheets per roll. 96 rolls per case. Sold per
case only.
Part No. Description
BWK6180 2-ply Bath Tissue, 96/case
Household
Paper Towels
Jumbo paper towels.
2-ply. 30 rolls per case.
Sold per case only.
Part No. Description
SCT1482 2-ply White Paper towels
Non-
Perforated
Hardwound
Paper Towels
Natural brown kraft
paper. Primarily for hand
drying in washrooms. 8"
wide. 350' roll. 12 rolls
per case. Sold per case
only.
Part No. Description
ENC4861 Natural Brown Paper towels
Wypall® Plus Wipers
Ideal for routine industrial cleaning and
maintenance. Removes soils and liquids
from face and hands. One-at-a-time
dispensing. 16.4" x 9.8" 1-ply sheets. 100/
pop-up box. 9 box/case.
Part No. Description
05740 Wypall Plus Wipers
Rags In-A-Box
Ideal for painting,
wiping up spills,
staining and
refinishing work.
Soft, absorbent
towels perform
like cloth. Built-
in handle allows
you to take the
box on the job
while keeping rags
clean. White. 200
- 13" x 10" rags
per box. 8 boxes
per case
Part No. Description
75260 Rags In-A Box
Cloth Rags
Standard case: 50 lbs. Other sizes
available upon request.
Part No. Description
CPW400 Mixed Rags (#1 light weight)
CPW100 Polo, Cotton (Colored)
CPW250 100% White Cotton
CPW300 Fleece (Sweatshirt)
CPW160 White Flannel
CPW200 Colored Flannel
CPW850 White T-Shirt
CPW150 New White Knit
CPW325 Cheese Cloth
CPW500 White Sheeting
CPW090 New Bar Towels
CPW700 Corduroy
Multi-Fold Towels
Natural brown
kraft paper or
white. Single ply.
9" x 9.45". 250
per pack. 16
packs per case.
Sold per case
only.
Part No. Description
088-6200 White Multi-fold towels
088-6202 Kraft Multi-foldr towels
Blue Shop Towels
Strong, absorbent towel
is ideal for changing oil,
refilling fluids and general
maintenance. Works when
wet. Available in rolls or pop-
up box. Sold per case only.
Part No. Description
75130
Roll Shop Towels, 10.4" x
11" sheets, 55 per roll / 30
per case
75190
Pop-Up Box Shop Towels,
11" x 13" sheets, 200 per
box / 8 box per case
"Clean-Room" Tacky Mats
Place outside rooms that must remain free
from dirt and other contaminants. Tacky
polyethylene film. 30 layers of tough film
are laminated together in a stack. Once
top film is dirty, simply pull off and throw
away. 30 sheets to a mat; 4 mats in a
package. 1/8" thick.
Part No. Description
P101W 18" x 36" Tacky Mat
P111W 24" x 36" Tacky Mat
Scrubs® Hand Cleaner Towels
Scrubs® pre
moistened towels
get your hands
clean and leave
them conditioned
and protected
anywhere that
you are working.
12/case.
Part No.
DYK42272
557
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
VACUUM CLEANERS - WET/DRY SHOP
Vacuum Cleaners — Heavy Duty
Positive water shut-off
• Protects motor from direct exposure to water.
Heavy-duty filter system
• For the roughest coarse materials to the finest dust
Use as a blower
• Switch hose from intake to exhaust, for cleaning inaccessible areas
Vacuum motor design
• Centrifugal blower produces high efficient vacuum and air flow.
One-stage bypass motor for wet/dry operation.
Vacuum Cleaners — Heavy Vacuum Cleaners — Poly Tanks
• Easily maneuverable
• High efficiency filtration system
• Durable polypropylene tank
• Handy tool caddy
• Ideal applications
Manufacturing plants, utility plants, schools, construction sites, service stations,
warehouses, shopping malls, hotels and many more.
8936-20 Exclusive features
• 3 Position switch-on/off/on demand
• Built-in sensor relay — activates vacuum when power is turned on
• 8 Amp outlet accepts 3 prong plug
• 12 Amp circuit breaker
8938-20 Exclusive features
• Rear drain plug
• 35’ Cord set
Vacuum Cleaner Dolly
49-90-1150
For use with Model 8950
only. (Order separately)
Part For Recov. Cap. Air Flow Suction Overall Dimensions
No. Materials gal bu Tank Volts Amps Motor Type cu ft/min. in water Width Height
8950 Wet/Dry 8 7/8 Steel 120 AC, 60 Hz 8.0 1-Stage Bypass 143 45 16-3/4 22-1/2
8955 Wet/Dry 10 1-1/8 Steel 120 AC, 60 Hz 8.0 1-Stage Bypass 143 45 19-1/2 38-1/2
Standard Equipment: For 8955 - 1-1/2” O.D. hose connections, cord with 3-prong grounded plug, 3 hold-down clamps, 7’ x 1-1/2”
I.D. vinyl hose, hose adapter, filter cartridge and 3 wheel dolly. For 8950 - 1-1/2” O.D. hose connections, cord with 3-prong grounded
plug, 3 hold-down clamps, 7’ x 1-1/2” I.D. vinyl hose, hose adapter and filter cartridge.
Part For Recov. Cap. Air Flow Suction Overall Dimensions
No. Materials gal bu Tank Volts Amps Motor Type cu ft/min. in water Width Height
8936-20 Wet/Dry 7-1/2 7/8 Poly 120 9.5 1-Stage Bypass 159 59 14-5/8 20-3/4
8938-20 Wet/Dry 9 1 Poly 120 7.4 2-Stage Bypass 102 84 16-1/8 33-1/2
Standard Equipment: For 8936-20 - 7’ x 1-1/2” hose, 1-1/2” conversion unit, dolly caster assembly, tool basket, cartridge filter and
filter bag. For 8938-20 - 7’ x 1-1/2” conversion unit, Vac dolly, tool basket, cartridge filter and filter bag.
Wet and Dry Vacuums
WD1245
WD1450
Part No. Model Cap. HP Filter
96887 WD1246 12 gallon 5.0 VF4000
18718 WD1450 14 gallon 6.0 VF5000
18723 WD1850 16 gallon 6.5 VF5000
15813 WD4050 4 gallon 5.0 VF3500
Wet and Dry Vacuum Filters
Standard Filter with WD1200 and WD1630
Part No. Model No. Description
72947 VF4000 Standard pleated paper filter
Standard Filter with WD1730
Part No. Model No. Description
72952 VF5000 High efficiency 2-stage filter
558 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SORBENTS
Oil Absorbing Pillows
Great for absorbing spills and leaking
fluids in tight spaces. Oil Only Pillows
feature a white spun bond outer
covering filled with white polypropylene,
are ideal for use in waste troughs,
coolant tanks, fluid reservoirs and sump
wells. For use with oil and petroleum
based fluids.
Packaged: 16 pillows per case, 19 lb
per case.
Part No. Description
OIL1818 Oil-Only Pillows
Oil Only and MRO Pads 100 and 200
Primarily used for
absorbing only petroleum-
based fluids off land or
water. Use this pad when
you require the maximum
amount of absorption at
the fastest possible rate.
Two thicknesses available.
Packaged 100 pads per bale; 3/8” t x 16” w x 20” l, absorbs 74
ounces per pad, or 200 pads per bale; 3/16” t x 16” w x 20” l,
absorbs 37 ounces per pad. Both styles weigh 19 lb per case.
Drum Top Pads
Polypropylene pad absorbs
liquids that build up on drum tops
from leaking pumps or dispenser
cans. Pre-cut pads fit the drum
top perfectly.
Packaged 25 pads per bale. 22”
dia. circle. Absorbs 78 oz pad. 5
lb per case.
Part. No Description
SPC100 Pads 100, Oil Only
SPC200 Pads 200, Oil Only
MRO100 Pads 100, MRO
Part No. Description
DTO25 Oil Only
DTA25 ALLWICK™ for all liquids.
Polypropylene Roll
An oil absorbing, melt
down polypropylene roll.
Use for absorbing
petroleum based leaks,
drips, spills or over-
sprays. Economical roll
form is easy to cut and
shape. 1 roll/bale; 3/8”T
x 30”W x 150’L, absorbs
116 gal/roll. 3/8 lb/roll.
Part. No.
Description
BRO150 Polypropylene Roll
Booms 810 and 410S
This polypropylene boom is used to absorb/skim oil off bodies of
water. Booms link together easily for various lengths. Sock-net
covering, no shedding.
Boom 810 is packaged 4 per bale, 8” d x 10” l, Absorbs 32 gal
per boom. Boom 510S is packaged 4 per bale, 5” D x 10” L.
Absorbs 10.5 gallons per boom.
Part. No. Description
SPC810 Boom 810
SPC510 Boom 510S
ALLWICK™ General SOC
Tubular absorbent
sock filled
with cellulose
from recycled
newspaper, is
your best sock
value. Keeps
areas around
machines clean,
safe and dry from fluids, leaks and spills.
Packaged 40 socks per case. 3” d x 48” l. Absorbs 1 gallon per
sock. 37 lb per case.
Part No. Description
AW412 ALLWICK™ General SOC
Not in the catalog?
Give us a call we are constantly
adding new items to our inventory.
559
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PUMPS
Tsurumi
2"/3" Diaphragm Pump
For Sand, Mud & Sludge
Capable of continuous dry opera-
tion for seepage de-watering.
Features and benefits
• Engine: Honda GX-120 gas
engine with oil sensor delivers
high power
• Durable TPE diaphragm and
check valves for extended wear life.
• Balanced wheel and handle assembly provide easy handling.
• Maximum head of 37 feet (11.3 meters)
• Automatic thermo-overload protection.
• Double mechanical oil-filled seal.
Specifications
TD4-200 TD4-300
Gallons Per Minute: 50 gpm Gallons per Minute: 85 gpm
Outlet Size (in): 2 in. Outlet Size (in): 3 in.
Max Solids (in): 1-1/4 in. Max Solids (in): 1-1/4 in.
Max Head (ft.): 25 ft. Max Head (ft.): 25 ft.
Horsepower 4.0 hp. Horsepower 4.0 hp.
Operating RPM: 3,600 rpm Operating RPM 3,600 rpm
Weight: 155 lbs. Weight: 155 lbs.
Part No. Description
TD4-200 2" Diaphragm Pump
TD4-300 3" Diaphragm Pump
Tsurumi
F-13 Utility Pump
Oil-free economical submersible pump for clean
surface water application. Built-in check valve.
Features and benefits
• Pumps solids up to 1-1/4" in diameter.
• Air filled motor protected by 3 oil seals.
• Built-in thermal motor protector.
• Operated either manually or automatically.
• Easy grip handle design
• 1-1/4" NPT discharge with garden hose adapter (3/4").
• 1 year warranty.
Specifications
Gallons Per Minute: 37 gpm Voltage: 115V
Outlet Size (in): 3/4" in. Cable Length: 10 ft
Nominal HP: 1/4 Weight (lb): 6.6
Part No. Description
F-13 Utility Pump
Tsurumi 2" Submersible
Electric Pump
Pump sands and debris with minimal
wear and clogging. Pump discharge
can be changed from 90° to 45°. Built
in sensor is great for tight places a
normal float won't work. Automatic
float switch available separately.
Features & Benefits
• Sensitive electrodes detect water
to start pump
• Urethane Semi-Vortex Impeller for
maximum durability.
• Double Inside Mechanical Seal with SIC faces provides the
longest operational life.
• Oil Lifter provides lubrication of the seal faces.
• V-Ring Seal Protector protects mechanical seal from abrasive
particles.
• Internal timer eliminates pump short cycling.
Specifications
Discharge Bore (in): 2" Weight (lbs):: 26
HP: 2/3 hp Height (in): 11
Cable Length (ft): 32 Diameter (in): 7-5/16
C.W.L (in): 2
Part No. Description
LB-480 w/o Automatic Float
LB-480A w/Automatic float
Tsurumi Gas Trash Pumps
Rugged and dependable, ideal for de-
watering applications with high solid
content. Sticks, stones and debris easily
pass through the pump, minimizing
downtime due to clogging.
Features and benefits:
• Engine: Honda gas engines with oil sensor deliver high power
• Impeller, Volute Casing and Wear Plate: High Chrome impel-
ler, Cast Iron volute casing plus Stainless Steel wear plate for
increased durability and decreased maintenance.
• Cage Frame: Durable Rolled-Steel frame protects pump/engine,
provides ease of handling or transport and safe operation.
• Rubber Cushion: Rubber Vibration Cushions mounted on cage
frame buffer stress and wear.
• Mechanical Seal: Silicon Carbide mechanical seal provides the
longest life in this class.
• Hose Coupling: Galvanized Steel hose couplings.
• Handle and Wheel Kit: For easy transportation, available for all
trash pumps as optional accessory.
Specifications
HONDA GX-160 HONDA GX-240
Gallons Per Minute: 190 gpm Gallons per Minute: 360 gpm
Outlet Size (in): 2 in. Outlet Size (in): 3 in.
Max Solids (in): 1 in. Max Solids (in): 1-1/2 in.
Max Head (ft.): 90 ft. Max Head (ft.): 96 ft.
Horsepower 5.5 hp. Horsepower 8.0 hp.
Operating RPM: 3,600 rpm Operating RPM 3,600 rpm
Weight: 96 lbs. Weight: 145 lbs.
Part No. Description
EPT3-50HA Honda GX-160 2" Gas Trash Pump
EPT3-80HA Honda GX-240 3" Gas Trash Pump
560 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PUMP ACCESSORIES / HOSES
PVC Water
Discharge Hose
Strong, lightweight PVC
lay flat hose designed for
moderate water discharge.
Mildew, oil and grease
resistant. Rolls flat for
easy storage. Pin lug male
and female connectors.
Temperature range: -5° F
to 170° F. Available diam-
eters from 3/4" through
16”, longer lengths to 300’ available, call for information.
Part No. Size
HSE2X50DPVC 2" X 50'
HSE3X50DPVC 3" X 50'
Mill Water
Discharge Hose
Scuff resistant durable
hose for pump discharge
and hydrant water service.
Jacket will not mildew or
decay. Rolls up flat for
easy storage. Black rubber
lining with white poly-
ester woven jacket. Not
rated for fire protection.
Includes male and female
couplings.
Part No. Size
HSE2X50DMILL 2" X 50'
HSE3X50DMILL 3" X 50'
Water Suction
Hose
Our standard contractors-
grade PVC suction hose is
economical and durable.
Designed for pump suction
and light discharge and
available in a broad range
of sizes. Call for sizes not
listed. Suitable for some
light chemical solutions
consult customer service
for chemical resistance
chart. Our rubber hose
is designed for heavy duty water and liquid waste suction and is
designed for maximum service life. Not recommended for sand or
gravel suction. Can also be used as hard-wall discharge hose. 20’
lengths stock. Includes male/female pin lock couplings.
Part No. Size Material
HSE2X20SPVC 2" X 20' PVC
HSE3X20SPVC 3" X 20' PVC
HSE2X20SRUB 2" X 20' Rubber
HSE3X20SRUB 3" X 20' Rubber
3/8" Pressure
Washer Hose
Rated to 3000 psi
This 3/8” x 50' hose can handle
between 1000 and 3000 PSI.
Its rugged, wire braid construc-
tion and durable brass couplers
help resist wear and extend
product life.
Specifications
Max Pressure: 3,000 PSI Size: 3/8"
Max Temp: 200° F Length: 50 FT
Color: Black Bend Restrictors: Yes (both ends)
Part No. Size
HSE3X50PW 3/8" x 50’
Steel Strainers
Zinc Plated Steel; Round Hole
Part No. Size
RHS25 2" Round Hole
RHS35 3" Round Hole
Global Type “A” Adapters
Cam & Groove Quick-Lock female NPT
x male adapter. A380 permanent mold
aluminum. Max PSI 250
Part No. Size
G200-A-AL 2”
G300-A-AL 3”
Global Type “B” Adapters
Cam & Groove Quick-Lock female cou-
pler x male NPT. A380 permanent mold
aluminum. BUNA Seal. Max PSI 250
Part No. Size
G200-B-AL 2”
G300-B-AL 3”
Pin Lug
Spanner Wrench
Single End
Part No. Size
SW20 #2
SW30 #3
Rubber Washer
For 2" and 3" water hose
Part No. Size
KRW25 2"
KRW35 3"
561
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WATER HOSES / ACCESSORIES
Voltec Industries
Jobsite Water Hose
• Kink-Free
• All brass couplings
• Abrasive resistant rubber vinyl jacket
Part No. Size
14-03450 3/4" x 50’
Voltec Industries
Deluxe Jobsite Water Hose
• Kink-Free
• Handle Grip
• All brass couplings
• Abrasive resistant rubber vinyl jacket
Part No. Size
14-05850 5/8” x 50’
14-58100 5/8” x 100’
Heavy Duty Black Rubber
Water Hose
• Withstands hot water
• High Burst Strength - 150 psi
• Heavy Duty Brass Couplings
Part No. Size
HSE 34x50W 3/4” x 50’
Pistol Grip Water Nozzle
• Clip locks any spray pattern
• Easy squeeze on/off lever
• Heavy duty all-zinc metallized body
• Brass valve and adjusting nut
• Stainless steel spring with lifetime packing
• Rubber handle guard
Part No. CSN75
Brass Twist
Nozzle
Part No.
500AN4
Industrial water coolers
keep water cold, clean and
available.
High density polyethylene
exterior won’t chip, peel,
buckle or rust.
Pressure-fit, double-walled
lid has no grooves to trap
mold or mildew.
Ultratherm® foam insulation
for maximum cold retention.
FDA grade inner liner is
easy to clean, resists stains
and odors.
The high visibility yellow
body and red lid contain
ultraviolet stabilizers to
prevent fading and cracking.
A lid keeper cord made of polyester with steel crimp reduces lid loss and is standard
on 5 and 10 gallon coolers. Heavy duty ABS handles have a backup plate for extra
strength. Spigot is recessed to reduce breakage. Available in 2, 3, 5, and 10 gallon
sizes. Optional cup dispenser and paper cone cups also available.
Part No. Description
8AJ-0001 10 gallon Igloo
8AJ-0002 2 gallon Igloo
8AJ-0003 3 gallon Igloo
8AJ-0004 5 gallon Igloo
8AJ-0005 Plastic cup dispenser
8FL-0014 Paper cone cups
Lid Keeper
Cord
Drip-proof
Spigot
ABS
Handles
and
Backup
Plates
Water Coolers
Fight Dehydration
on the Jobsite!
Order any Gatorade
or
Ice-O-Tonic drink
mixes from Nefco
562 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FANS
Meets OSHA Standard UL Listed
Meets
OSHA Standard
UL Listed
F18-TE
Overall
Height
53”
Specifications
Size 24" & 30"
Motor 2-Speed, 1/4 hp.,
Totally Enclosed
Switch Pull Chain
Cord 18' SJT Type 3
Blade Steel Hub, Spider
Aluminum paddles
Guards Chrome Plated Steel
Meets OSHA
Standards
UL Listed
Industrial Air Circulator
Shipped Un-Assembled and Packed in a single,
UPS-able Carton.
Painted Gray.
Pole Stand Model
adjusts from 43"
to 60". 1- Year
Warranty.
Size Mount Type Part No. CFM Amps Wt.
24"
Pedestal ACU-24-P
6800
/
5000
2.5
75
Wall Mount ACU-24-W 45
I-Beam Mount ACU-24-I 50
Ceiling Mount ACU-24-C 45
Suspension Mount ACU-24-S 43
30"
Pedestal ACU-30-P
7900
/
6000
2.7
78
Wall Mount ACU-30-W 48
I-Beam Mount ACU-30-I 53
Ceiling Mount ACU-30-C 48
Suspension Mount ACU-30-S 46
Optional Wheel Kit HD-WK
Industrial Floor Fan
F18H-TE
Specifications
Size 12 &18"
Motor 3-Speed, 1/8 hp.
Switch Rotary
Cord 10' SJT Type 3
Blade Steel Hub, Spider
Aluminum paddles
Guards Chrome Plated Steel
Tilts 360°
Size Model Motor HP CFM Amps
18" F-18-TE 1/8 5750 - Hi
4700 - Med
3200 - Low
2.2
18" F-18H-TE 1/8 2.2
• 3-Speed, Totally enclosed motor
• Mount with one bolt or lag screw to
walls, ceilings, work benches, machines
or any surface
• Fan head rotates 360° in both the
horizontal and vertical direction
Meets OSHA Standard UL Listed
Work Station Fan
Specifications:
Size 12" - U-12_TE
CFM 2750 / 2200 / 1600
Switch Pull Chain
Cord 10' SJT Type 3
Blade Aluminum
Guards Chrome Plated Steel
Specifications:
Size 18" - U-18-TE
CFM 5750 / 4700 / 3200
Switch Pull Chain
Cord 10' SJT Type 3
Blade Aluminum
Guards Chrome Plated Steel
Size Model Motor HP Amps
12" U-12-TE 1/12 2.1
18" U-18-TE 1/8 2.2
Direct Drive Portable Blowers
Specifications
Size 36" & 42"
Motor 2-Speed (36"), 1/3 hp.,
1-Speed (42") 1/2 hp.,
Totally Enclosed
Switch Rocker
Cord 15' SJT Type 3
Blade 3-Paddle, Steel
Guards Spiral Wire, Front & Rear
Specifications
Size 48"
Motor 1-Speed, 3/4 hp., Open,
Drip-Proof
Switch Rocker
Cord 15' SJT Type 3
Blade 2-Paddle, Steel
Guards Spiral Wire, Front & Rear
Size Mount Type Part No. CFM Amps
36" Standard PB-36-D 12,500 /
9,000 5.6
Swivel PBS-36-D
42" Standard PB-42-D 15,600 7.9
Swivel PBS-42-D
48" Standard PB-48-D-OP 17,300 10.1
Swivel PBS-48-D-OP
563
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CONTAINERS / SAFETY CANS / SPRAYERS
UI-50-S 5 gal. UI-20-FS 2 gal.
UI-50-S 5 gallon UI-20-FS 2 gal.
FM
Approved
Baked on
Powder
Coat
Finish
UI-50-FS
12-1/2” x 13-1/2”
UI-2-S 1 qt. UI-10-S
1 gal.
UI-4-S 2 qt.
Eagle galvanized Type I cans meet OSHA and NFPA Code 30
requirements and are UL and ULC listed and FM approved for safe
handling and storage of gasoline and other flammable liquids.
Eagle cans feature environmentally friendly lead free technology,
constructed of 24-ga. hot dipped galvanized steel. Other
manufacturers’ safety cans use lead coated terne steel.
Compliance: OSHA 29 CFR
1910.106, 1925.152 and
NFPA Code 30.
The above cans are available in blue for the storage of kerosene
and yellow for the storage of diesel. When ordering, add a “B” or
“Y” at the end of the model number. UL, ULC and FM approved.
UL
Listed
Type I Safety Cans
Capacity Dimensions W/O Funnel W/ Funnel
1 quart 5-1/4 x 8 UI-2-S -
2 quart 6-3/4 x 8-3/4 UI-4-S -
1 gallon 9 x 8 UI-10-S UI-10-FS
2 gallon 11-1/4 x 9-1/2 UI-20-S UI-20-FS
5 gallon 12-1/2 x 13-1/2 UI-50-S UI-50-FS
Industrial Air Circulator
Part No. 301P
Tank capacity (gallon)
Actual 3
Operating 2-1/2”
Extra-wide mouth - 3-1/4” •
Pressure relief safety valve •
Translucent tank •
Non-corrosive polymer pump 10”
Discharge valve - polymer •
Rotating wand - polymer 16”
Adjustable nozzle - polymer •
Pump handle •
Pack-display box •
Convenient carrying strap •
Standard shipping pack 1
Polyethylene Tank Sprayers
• Economical, for standard spraying applications
• Chemical resistant leakproof Viton seals
• Automatic/manual pressure relief valve with pressure indicator ring
• Extra-wide mouth for ease in filling and emptying tanks
• UV resistant translucent tanks for quick chemical level checks
• 33” premium PVC hose
5 Gallon Plastic
Buckets
White, 5 gallon, high-density
polyethylene buckets for multiple
uses. Lids sold separately.
Part No. Description
MIS5GALPAIL 5-gallon pail
INDLID Lid
Round Metal Cans
Made of high quality tin plate. Typi-
cally called paint cans. Available in
sizes from 1 pint to gallon.
Part No. Description
TCR008 8 oz.
TCR016 16 oz
TCR032 32 oz.
TCR128 128 oz.
564 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SHOVELS
Jackson® Blue Max™ J-150 Series
Long Handle Shovels
Contractor Grade
• Extra-thick 14 ga. steel blade (10" x 12") for
maximum toughness.
• Two rivets in the 11" socket keep handles
attached. Redistributes load to stronger steel
socket - not the handle.
• 48" long Northern Ash handles
• Forward turned step
Part No. Desc
BMDLR Round Point
BMDLS Square Point
Jackson® J-100 Series
Industrial Shovels
Long Handle
• Blades with onion skin finish for better
release
• Rolled back step
• 48" tapered, lacquered ash handle for more
control
• Blade Dimensions: 9 1/2" x 12"
Part No. Desc
BMTLR Round Point
BMTLS Square Point
Jackson® Blue Max™ J-150 Series
Long Handle Shovels
Contractor Grade
• Extra-thick 14 Gauge Steel Blade (9-1/2"
x 12") For Maximum Toughness.
• Two rivets in the 11" socket keep handles
attached. Redistributes load to stronger
steel socket - not the handle.
• 30" long Northern Ash D-handles
• Forward turned step
Part No. Desc
BMDDR Round Point
BMDDS Square Point
Union Tools
General Purpose Scoop
• #2 Steel Blade (11.5” x 14.5”)
• 46” long Ash handles
Part No. Desc
79805 General Purpose Scoop
Jackson® J-100 Series
J-100 Series Industrial
Shovels
D-Handle
• Blades with onion skin finish for better
release
• Rolled back step
• 30" tapered, lacquered ash handle for
more control
• Poly D Grip for comfort
• Blade Dimensions: 9 1/2" x 12"
Part No. Desc
BMTDR Round Point
BMTDS Square Point
Ames/True Temper
Poly Grain/Snow Scoop
• No. 12 poly blade, 14-1/4" x 17-3/4"
• 27" Ash handle with Cushion Poly D-Grip
• Molded ribs
Part No. Desc
1680000 Poly Grain/Snow Scoop
Ames/True Temper Ceremonial Shovel
• Polished 9" x 11-1/2" Chrome Blade
• 27" Ash handle with Armor D-Handle
• Round Point
Part No. Desc
1257800 Ceremonial Shovel
565
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DIGGING TOOLS / RAKES / BARS / SLEDGES
Ames/True Temper
Post Hole
Digging Bar
w/ Tamper Top
Utility bars made from
heat-treated, high quality
carbon steel for years of
service.
• Specifications Dia x Ln:
1" x 69"
• Heat-Treated, High-Quality Carbon Steel
Part No. Desc
1160000 Post Hole Digging Bar
Ames/True Temper Post Hole Diggers
• Strong northern white ash handles with bolt-through construc-
tion for strength
Part No. Blade Size Point Spread Handles
1706100 9-1/2" x 6-1/2" 6-1/4" 48"
TPHD 8" x 5-1/2" 5-1/2" 44"
Ames/True Temper
Pencil Point San
Angelo Bar
Utility bars made from
heat-treated, high quality
carbon steel for years of
service.
Part No. Desc
1160300 1" x 72" San Angelo Bar
Ames/True Temper
Gooseneck
Wrecking Bars
• Fully Painted
• For small wrecking jobs
• Claw on end removes nails
Part No. Dia x Length
1169400 1/2" x 12"
1169800 5/8" x 18"
1170500 3/4" x 24"
Part No. Dia x Length
1171000 3/4" x 30"
1171600 3/4" x 36"
1173000 1" x 48"
Ames/True Temper Garden Rake
• One-piece forged bow rake
• Seal-coated white ash handle for strength and durability
Part No. Head Width Tines Handle
1886300 16-3/4" 16 60"
Ames/True Temper Level Head Rake
• One-piece forged head for maximum strength and durability
• Seal-coated white ash handle
Part No. Head Width Tines Handle
1887200 16-5/8" 16 66"
Ames/True Temper
Sledge Hammers
Double Milled Head
• Best for heavy pounding jobs
• Forged steel head for added
durability
• Hickory handle for strength
Part No. Head Wt. Handle Length Handle Type
1196100 2 lbs. 16" Hickory
1196500 3 lbs. 16" Fiberglass
1196900 4 lbs. 16" Hickory
1197900 8 lbs. 32/36" Hickory
1199100 10 lbs. 32/36" Hickory
1199700 16 lbs. 36" Hickory
Be sure to visit
www.GoNefco.com
Online Catalog • New Products
Submittals • Specials
566 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WHEEL BARROWS / CEMENT / TEMPORARY FENCING
Jackson®
Steel Mortar Mixing Pan
• 3 cu. ft. capacity
• 32" x 28" x 10"
• Stand sold separately.
Part No. Description
1MP Mortar Mixing Pan
18MPS Mortar Mixing Pan Stand
A smooth, seamless body with
comfortable molded-in, one-piece
handle. High density polyethylene body
resists rust, dents and corrosion and
most chemicals. 300 lb. load capacity.
Features 3/4” steel axle for heavy
duty hauling and moving. Brown cart
is available in 3.5 and 7.5 cubic foot
capacities.
Big Wheel® Cart
Part No. Head Wt.
5654 Big Wheel Cart - 3.5 cu. ft. capacity
5642 Big Wheel Cart - 7.5 cu. ft. capacity
J6
Jackson® Contractor Wheelbarrows
• 6 cu. ft. capacity
• "H Brace, steel cross strips and leg shoes
• Shipped unassembled
• Glide-ring design on steel trays won’t catch shovels or hoes
• 16" wheel assembly with pneumatic 2-ply tire with oil-lube
bearings.
Part No. Description
J6 Contractor's Wheelbarrow
M6T22 Contractor's Wheelbarrow w/ leg stabilizers
M6FFB Same as M6t22 w/ Flat Free (Solid) Tire
M6T22
Flat-Free Solid Tire for Wheelbarrows
Part No. Desc
FFTCC Solid Wheelbarrow Tire
Fence Posts (U-Posts)
• Rolled design and tough green enamelled finish over
14 ga. steel.
• Punched every 6”, with spade.
• Height: 72”
Part No. Desc
UP72LD 6’ U-Posts
TEMPORARY FENCING Silt Fence
for Erosion Control
For erosion control in residential and commer-
cial construction. Woven polypropylene yarns are
designed to block sediment while letting water flow
slowly through fabric. Proper installation keeps sedi-
ment from washing into streams and rivers. 3 ft. x
100 ft. roll. 11 pre-attached stakes per roll included.
Part No. Description
SP11273611 Silt fence, 36” x 100’
Barrier Fence
High Visibility
Lightweight, economical, durable and highly visible.
OSHA Orange for high visibility
UV Stable for long life
High strength polypropylene mesh
Part No. Desc
BFW4100GR Barrier Fence, 4’ x 100’
High Strength
Concrete Mix
High strength concrete mix
for anchoring posts, poles,
and pouring footings and
slabs. Meets ASTM C 387
strength requirements for
structural applications.
• For applications requiring at least 2"
thickness
• Just add water.
P/N 65200390 80 lb. bag, 42 bags/pallet
Non-Shrink
Construction
Grout
A non-shrink, non-
metallic structural hydraulic cement for high
strength grouting of heavy machinery, steel
bearing plates, concrete columns, etc.
• Super-plasticized for improved strength.
• Can be made to a dry pack, plastic, or
flowable consistency for a variety of
applications.
• Just add water.
P/N 65250560 50 lb. bag, 30 bags/pallet
Leak-Stopper Hydraulic Cement
A mixture of sand, cement
and special additives
designed to stop the flow
of water through breaks in
concrete and masonry.
• Instant setting hydraulic cement.
• Great for leaks in pools or stopping
other active leaks in concrete and
masonry.
• For all kinds of instant repairs to
concrete and masonry. No need for
forms or braces.
• Available in white.
• Just add water.
P/N 60200700 50 lb. pail, 56 pails/pallet
SAKRETE CEMENTS / GROUT
567
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MATERIAL HANDLING
Heavy-Duty
Multi-Guard
• Use at all outdoor entrances
• Thousands of scraping “fingers”
powerfully remove dirt from sight
• Mat holds pounds of dirt between
cleaning
• High quality, durable rubber
compound is approximately
5/8” thick
Workmate
• Excellent for wet or dry industrial
work areas
• 7/8” thick rubber mat provides
comfort underfoot
• Modules can be connected to
cover any size work area
• Color: Black
• Surface and drainage holes are
designed for safety and easy clean-
up
• Optional beveled edging is available
Shelf Bins
Seamless, permanently bright
yellow molded polypropylene
bins fit 12”, 18” and 24” deep
shelving. Durable polypropylene
outlasts corrugated bins and
pay for themselves in reduced
replacement costs. One-piece
molded construction makes shelf
bins water-proof and unaffected by
grease or oil. The special built-in
hang lock catches the underside
of the shelf above the bin allowing
each bin to be tilted out for complete access. A convenient
front handle area contains a molded-in label holder. Edges
are reinforced.
Optional dividers are available for all bins except
Model 5AB-0062.
All Steel
Hand Trucks
500 lb. Capacity
Fairbanks 500 lb capacity all steel
hand trucks are robotic welded for
greater consistency. A back lip on the
nose plate adds real strength, while
holding small loads in place.
A large 8” x 14”, 10 gauge nose iron
plate with Super Slik™ raised runners
help slide the load on and off with
minimal effort.
Curved crossbars hold loads in place.
8” semi-pneumatic wheels with self
lube steel bearings make rolling easier.
Durable epoxy powder coated for a
longer lasting finish.
Shelf Bin Dividers
Part No. Description
2GJ-0001 16” x 24” Ribbed bottom
2GJ-0002 24” x 32” Vac-cup bottom
2GJ-0003 28” x 46” Vac-cup bottom
2GJ-0004 32” x 39” Ribbed bottom
2GJ-0020 36” x 60” Vac-cup bottom
2GJ-0005 36” x 72” Smooth bottom
Part No. Description
2GJ-0085 18” x 24” mat
2GJ-0085-39 18” x 48” mat
2GJ-0038 24” x 36” mat
2GJ-0039 36” x 48” mat
2GJ-0040 36” x 60” mat
Wheels
Part No. Load Hgt. Width lb Size/Pneumatic
5AQ-0107
Double Grip
Handle 500 lb 46 14 20 8” x 13/4” / Semi
5AQ-0107
Double Grip
Handle 500 lb 46 14 20 8” x 13/4” / Semi
Part No. Description
5AB-0043 Bins 5AB-0063/0064
5AB-0044 Bins 5AB-0065/0066/0069
5AB-0045 Bins 5AB-0067/0068
Part Carton
No. Width O.D.H. Length Qty.
5AB-0062 2-3/4 4 11-5/8 24
5AB-0063 4-1/8 4 11-5/8 24
5AB-0064 4-1/8 4 17-5/8 12
5AB-0065 6-5/8 4 11-5/8 12
5AB-0066 6-5/8 4 17-7/8 12
5AB-0067 8-3/8 4 11-5/8 12
5AB-0068 8-3/8 4 17-7/8 12
5AB-0069 6-5/8 4 23-5/8 6
568 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TURNBUCKLES
Eye Jaw to Eye Turnbuckles
Jaw to Jaw Turnbuckles
Stub End Turnbuckles
Hook to Eye Turnbuckles
Thread Dia. Length Part No. Plain HDG
1/4-2 4 25C400JET 25C400JETH
5/16-18 4-1/4 31C425JET 31C425JETH
3/8-16 6 37C600JET 37C600JETH
1/2-13 6 50C600JET 50C600JETH
1/2-13 9 50C900JET 50C900JETH
1/2-13 12 50C1200JET 50C1200JETH
5/8-11 6 62C600JET 62C600JETH
5/8-11 9 62C900JET 62C900JETH
5/8-11 12 62C1200JET 62C1200JETH
3/4-10 9 75C900JET 75C900JETH
3/4-10 12 75C1200JET 75C1200JETH
3/4-10 18 75C1800JET 75C1800JETH
7/8-9 12 87C1200JET 87C1200JETH
7/8-9 18 87C1800JET 87C1800JETH
1-8 12 100C1200JET 100C1200JETH
1-8 18 100C1800JET 100C1800JETH
Thread Dia. Length Part No. Plain
1/4-20 4 25C400SET
3/8-16 6 37C600SET
1/2-13 6 50C600SET
1/2-13 9 50C900SET
1/2-13 12 50C1200SET
5/8-11 6 62C600SET
5/8-11 9 62C900SET
5/8-11 12 62C1200SET
3/4-10 9 75C900SET
3/4-10 12 75C1200SET
3/4-10 18 75C1800SET
7/8-9 12 87C1200SET
7/8-9 18 87C1800SET
1-8 12 100C1200SET
1-8 18 100C1800SET
1-1/8 6 112C600SET
1-1/4 6 125C600SET
1-1/2 6 150C600SET
Thread Dia. Length Part No. Plain HDG
1/4-20 4 25C400HET 25C400HETH
1/4-20 6 25C600HET 25C600HETH
5/16-18 4-1/4 31C425HET 31C425HETH
3/8-16 6 37C600HET 37C600HETH
1/2-13 6 50C600HET 50C600HETH
1/2-13 9 50C900HET 50C900HETH
1/2-13 12 50C1200HET 50C1200HETH
5/8-11 6 62C600HET 62C600HETH
5/8-11 9 62C900HET 62C900HETH
5/8-11 12 62C1200HET 62C1200HETH
3/4-10 6 75C600HET 75C600HETH
3/4-10 9 75C900HET 75C900HETH
3/4-10 12 75C1200HET 75C1200HETH
3/4-10 18 75C1800HET 75C1800HETH
7/8-9 12 87C1200HET 87C1200HETH
7/8-9 18 87C1800HET 87C1800HETH
1-8 12 100C1200HET 100C1200HETH
1-8 18 100C1800HET 100C1800HETH
Hook to Hook Turnbuckles
Thread Dia. Length Part No. Plain HDG
1/4-20 4 25C400HHT 25C400HHTH
5/16-18 4-1/4 31C425HHT 31C425HHTH
3/8-16 6 37C600HHT 37C600HHTH
1/2-13 6 50C600HHT 50C600HHTH
1/2-13 9 50C900HHT 50C900HHTH
1/2-13 12 50C1200HHT 50C1200HHTH
5/8-11 6 62C600HHT 62C600HHTH
5/8-11 9 62C900HHT 62C900HHTH
5/8-11 12 62C1200HHT 62C1200HHTH
3/4-10 9 75C900HHT 75C900HHTH
3/4-10 12 75C1200HHT 75C1200HHTH
3/4-10 18 75C1800HHT 75C1800HHTH
7/8-9 12 87C1200HHT 87C1200HHTH
7/8-9 18 87C1800HHT 87C1800HHTH
1-8 12 100C1200HHT 100C1200HHTH
1-8 18 100C1800HHT 100C1800HHTH
Eye to Eye Turnbuckles
Thread Dia. Length Part No. Plain HDG
1/4-20 2-1/8 25C212EET/LTD -
1/4-20 4 25C400EET 25C400EETH
5/16-18 4-1/4 31C425EET 31C425EETH
5/16-18 4-1/2 - 31C450EETH
3/8-16 6 37C600EET 37C600EETH
1/2-13 6 50C600EET 50C600EETH
1/2-13 9 50C900EET 50C900EETH
1/2-13 12 50C1200EET 50C1200EETH
5/8-11 6 62C600EET 62C600EETH
5/8-11 9 62C900EET 62C900EETH
5/8-11 12 62C1200EET 62C1200EETH
3/4-10 6 75C600EET 75C600EETH
3/4-10 9 75C900EET 75C900EETH
3/4-10 12 75C1200EET 75C1200EETH
3/4-10 18 75C1800EET 75C1800EETH
7/8-9 12 87C1200EET 87C1200EETH
7/8-9 18 87C1800EET 87C1800EETH
1-8 6 100C600EET 100C600EETH
1-8 12 100C1200EET 100C1200EETH
1-8 18 100C1800EET 100C1800EETH
Thread Dia. Length Part No. Plain HDG
1/4-20 4 25C400JJT 25C400JJTH
5/16-18 4-1/4 31C425JJT 31C425JJTH
3/8-16 6 37C600JJT 37C600JJTH
1/2-13 6 50C600JJT 50C600JJTH
1/2-13 9 50C900JJT 50C900JJTH
1/2-13 12 50C1200JJT 50C1200JJTH
5/8-11 6 62C600JJT 62C600JJTH
5/8-11 9 62C900JJT 62C900JJTH
5/8-11 12 62C1200JJT 62C1200JJTH
3/4-10 9 75C900JJT 75C900JJTH
3/4-10 12 75C1200JJT 75C1200JJTH
3/4-10 18 75C1800JJT 75C1800JJTH
7/8-9 12 87C1200JJT 87C1200JJTH
7/8-9 18 87C1800JJT 87C1800JJTH
1-8 12 100C1200JJT 100C1200JJTH
1-8 18 100C1800JJT 100C1800JJTH
569
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TURNBUCKLES / EYE BOLTS
Bent Eye Bolts
• Zinc Plated
• Supplied with Nut
Bent Eye Bolts
• Zinc Plated
• Supplied without
Nut
Forged Clevises
Available plain,
painted, galvanized,
and stainless steel.
Forged Eye Bolts
• Plain or hot dip
galvanized
• Also available in stainless
steel and T316 stainless
steel
Thread Dia. Lgt. Part No. Plain HDG SS
1/4-20 4 25C400TUB 25C400TUBH -
5/16-18 4-1/4 31C425TUB - -
3/8-16 6 37C600TUB 37C600TUBH 37C600TUBS
1/2-13 3 50C300TUB 50C300TUBH -
6 50C600TUB 50C600TUBH 50C600TUBS
9 50C900TUB 50C900TUBH -
12 50C1200TUB 50C1200TUBH -
5/8-11 3 62C300TUB 62C300TUBH -
6 62C600TUB 62C600TUBH 62C600TUBS
9 62C900TUB 62C900TUBH -
12 62C1200TUB 62C1200TUBH -
3/4-10 3 75C300TUB 75C300TUBH -
6 75C600TUB 75C600TUBH 75C600TUBS
9 75C900TUB 75C900TUBH -
Thread Dia. Lgt. Part No. Plain HDG
3/4-10 12 75C1200TUB 75C1200TUBH
18 75C1800TUB 75C1800TUBH
7/8-9 6 87C600TUB 87C600TUBH
12 87C1200TUB 87C1200TUBH
18 87C1800TUB 87C1800TUBH
1-8 6 100C600TUB 100C600TUBH
12 100C1200TUB 100C1200TUBH
18 100C1800TUB 100C1800TUBH
1-1/8 6 112C600TUB 112C600TUBH
1-1/4 6 125C600TUB 125C600TUBH
1-1/2 6 150C600TUB 150C600TUBH
12 150C1200TUB 150C1200TUBH
1-3/4 6 175C600TUB 175C600TUBH
2-4.5 6 200C600TUB 200C600TUBH
Turnbuckle Bodies
Dia. OAL Part No.
10-24 2-3/4 10C275BEBZ
3/16-24 2-1/4 18C225BEBZ
3/16-24 2-1/2 18C250BEBZ
3/16-24 2-3/4 18C275BEBZ
3/16-24 3 18C300BEBZ
1/4-20 2 25C200BEBZ
1/4-20 2-1/2 25C250BEBZ
1/4-20 3 25C300BEBZ
1/4-20 4 25C400BEBZ
1/4-20 5 25C500BEBZ
1/4-20 6 25C600BEBZ
5/16-18 2-1/4 31C225BEBZ
5/16-18 3-1/4 31C325BEBZ
5/16-18 4 31C400BEBZ
5/16-18 5 31C500BEBZ
5/16-18 6 31C600BEBZ
3/8-16 2-1/2 37C250BEBZ
3/8-16 4 37C400BEBZ
3/8-16 5 37C500BEBZ
3/8-16 6 37C600BEBZ
3/8-16 8 37C800BEBZ
1/2-13 4 50C400BEBZ
1/2-13 5 50C500BEBZ
1/2-13 6 50C600BEBZ
1/2-13 8 50C800BEBZ
1/2-13 10 50C1000BEBZ
1/2-13 12 50C1200BEBZ
5/8-11 6 62C600BEBZ
Dia. OAL Part No.
1/4-20 2 25C200BENZ
1/4-20 2-1/2 25C250BENZ
1/4-20 3 25C300BENZ
1/4-20 4 25C400BENZ
3/8-16 2-1/2 37C250BENZ
3/8-16 4 37C400BENZ
3/8-16 6 37C600BENZ
1/2-13 4 50C400BENZ
Size Part No. HDG
1/4 x 1-1/2 25C150FEB 25C150FEBH
1/4 x 2 25C200FEB 25C200FEBH
1/4 x 3 25C300FEB 25C300FEBH
1/4 x 4 25C400FEB 25C400FEBH
1/4 x 5 25C500FEB 25C500FEBH
1/4 x 6 25C600FEB 25C6000FEBH
5/16 x 2-1/4 31C225FEB 31C225FEBH
5/16 x 3 31C300FEB 31C300FEBH
5/16 x 3-1/4 31C325FEB 31C325FEBH
5/16 x 4 31C400FEB 31C400FEBH
5/16 x 5 31C500FEB 31C500FEBH
5/16 x 6 31C600FEB 31C600FEBH
3/8 x 2-1/2 37C250FEB 37C250FEBH
3/8 x 3 37C300FEB 37C300FEBH
3/8 x 3-1/2 37C350FEB 37C350FEBH
3/8 x 4 37C400FEB 37C400FEBH
3/8 x 4-1/2 37C450FEB 37C450FEBH
3/8 x 5 37C500FEB 37C500FEBH
3/8 x 6 37C600FEB 37C600FEBH
3/8 x 8 37C800FEB 37C800FEBH
3/8 x 10 37C1000FEB 37C1000FEBH
1/2 x 3-1/4 50C325FEB 50C325FEBH
1/2 x 4 50C400FEB 50C400FEBH
1/2 x 6 50C600FEB 50C600FEBH
1/2 x 7 50C800FEB 50C800FEBH
1/2 x 10 50C1000FEB 50C1000FEBH
1/2 x 12 50C1200FEB 50C1200FEBH
5/8 x 4 62C400FEB 62C400FEBH
5/8 x 5 62C500FEB 62C500FEBH
5/8 x 6 62C600FEB 62C600FEBH
5/8 x 7 62C800FEB 62C800FEBH
5/8 x 10 62C1000FEB 62C1000FEBH
3/4 x 4-1/2 75C450FEB 75C450FFEBH
Trade Size Tap Size NEFCO No.
No. 2 3/8-16 200N37FOS
1/2-13 200N50FOS
5/8-11 200N62FOS
No. 2.5 5/8-11 250N62FOS
3/4-10 250N75FOS
7/8-9 250N87FOS
No. 3 3/4-10 300N75FOS
1-8 300N100FOS
1-1/4-7 300N125FOS
Not in the catalog? Give us a call - we are constantly adding new
items to our inventory.
Eye-Bolts
570 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MACHINERY EYE BOLTS / U-BOLTS
MEP MES
Shank Wt. per Rated
Size Length Plain No. Shoulder No. 100 Pcs Capacity
1/4-20 1 25C100MEP 25D100MES 4.9 500
5/16-18 1-1/8 31C112MEP 31D112MES 8.5 900
3/8-16 1-1/4 37C125MEP 37D125MES 14.0 1,300
7/16-14 1-3/8 43C137MEP 43D137MES 19.0 1,800
1/2-13 1-1/2 50C150MEP 50D150MES 29.5 2,400
9/16-12 1-3/4 56C175MEP 56D175MES 44.0 3,200
5/8-11 1-3/4 62C175MEP 62D175MES 58.0 4,000
3/4-10 2 75C200MEP 75D200MES 88.5 5,000
7/8-9 2-1/4 87C225MEP 87D225MES 129.0 7,000
1-8 2-1/2 100C250MEP 100D250MES 198.5 9,000
1-1/8-7 2-3/4 112C275MEP 112D275MES 292.0 12,000
1-1/4-7 3 125C300MEP 125D300MES 396.0 15,000
1-1/2-6 3-1/2 150C350MEP 150D350MES 654.0 21,000
1-3/4-5 3-3/4 175C375MEP 175D375MES 1050.0 28,000
2-4-1/2 4 200C400MEP 200D400MES 1580.0 38,000
2-1/2-4 5 250C500MEP 250D500MES 2900.0 56,000
Machinery Eye Bolts
Plain
Pattern
Shoulder
Pattern
U-Bolts
Standard U-Bolts
Material: Carbon Steel**
Finish: Zinc or Stainless
Service: Recommended for support - anchor or guide of heavy loads
Ordering: Specify pipe size - figure number and finish - furnish with four hex nuts each
Sizes: 1/2” - 1” can be supplied with 3/8” rod size for heavy duty use (specify “HD”)
Pipe Wt./C Max. Rec. Part No. Part No.
Size A B C T Approx. Load,lb* Zinc Stainless
1/2 1/4 2-3/4 1-3/16 2-3/8 11 485 50DUBOZ 50DUBOS
3/4 1/4 2-3/4 1-3/8 2-3/8 12 485 75DUBOZ 75DUBOS
1 1/4 2-3/4 1-5/8 2-3/8 12 485 100DUBOZ 100DUBOS
1-1/4 3/8 2-7/8 2-1/16 2-3/8 28 1220 125DUBOZ 125DUBOS
1-1/2 3/8 3 2-3/8 2-1/2 30 1220 150DUBOZ 150DUBOS
2 3/8 3-1/4 2-13/16 2-1/2 33 1220 200DUBOZ 200DUBOS
2-1/2 1/2 3-3/4 3-7/16 3 73 2260 250DUBOZ 250DUBOS
3 1/2 4 4-1/16 3 78 2260 300DUBOZ 300DUBOS
3-1/2 1/2 4-1/4 4-9/16 3 84 2260 350DUBOZ 350DUBOS
4 1/2 4-1/2 5-1/16 3 90 2260 400DUBOZ 400DUBOS
5 1/2 5 6-1/8 3 101 2260 500DUBOZ 500DUBOS
6 5/8 6-1/8 7-3/8 3-3/4 197 3620 600DUBOZ 600DUBOS
8 5/8 7-1/8 9-3/8 3-3/4 233 3620 800DUBOZ 800DUBOS
10 3/4 8-3/8 11-5/8 4 491 5420 1000DUBOZ 1000DUBOS
12 7/8 s9-5/8 13-3/4 4-1/4 773 7540 1200DUBOZ 1200DUBOS
Light Duty U-Bolts Available on Request
* With a minimum safety factor of 5
** Also available in CAD plated - HDG - 316 S/S
571
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE ROPE / PERIMETER CABLE
Wire Rope
How to Order Wire Rope
Give complete information on your order to
prevent errors and avoid delays
Item Example
Length of rope required 150-ft
Diameter (maximum measure) 5/8”
Construction 6 x 19
Core type IWRC
Type of material Improved plow steel
Direction of type and lay Right lang lay
Type of equipment Shovel hoist rope
6 x 7 - Regular Lay
This is a stiff rope,
highly resistant
to abrasive wear.
It is a standard
recommendation
for guys, stays, and rigging.
6 x 19
(6 x 25 Filler Wire)
This is the true
work horse rope
of the construction
equipment field. It
combines good flexibility and
strength with high resistance to
crushing and abrasion.
Nominal Breaking Strength
Black Strand Improved Plow Steel Wire Rope
6 x 19 & 6 x 37
Approx. Approx. Classification Spin Resistant Ropes
Weight Weight Nominal Nominal Extra 19 x 7 x IPS1 8 x 19 x IPS1
lb/ft lb/ft Dia. in Dia. in IPS IPS Nominal Approx. Nominal Approx.
F/C IWRC mm inches F/C IWRC IWRC B/S Wt./ft B/S Wt./ft
.105 .116 6.5 1/4 2.74 2.94 3.40 2.77 .113
.164 .l8 8.0 5/16 4.26 4.58 5.27 4.30 .177
.236 .26 9.5 3/8 6.10 6.56 7.55 6.15 .250
.32 .35 11. 7/16 8.27 8.89 10.2 8.33 .350
.42 .46 13. 1/2 10.7 11.5 13.3 10.8 .450 11.7 .47
.53 .59 14.5 9/16 13.5 14.5 16.8 13.6 .580 14.7 .60
.66 .72 16. 5/8 16.7 17.9 20.6 16.8 .710 18.1 .73
.95 1.04 19. 3/4 23.8 25.6 29.4 24.0 1.02 25.9 1.06
1.29 1.42 22. 7/8 32.2 34.6 39.8 32.5 1.39 35.0 1.44
1.68 1.85 26. 1 41.8 44.9 51.7 42.2 1.82 45.5 1.88
2.13 2.34 29. 1-1/8 52.6 56.5 65.0 53.1 2.30 57.3 2.39
2.63 2.89 32. 1-1/4 64.6 69.4 79.9 65.1 2.84
3.18 3.50 35. 1-3/8 77.7 83.5 96.0
3.78 4.16 38. 1-1/2 92.0 98.9 114.0
4.44 4.88 42. 1-5/8 107.0 115.0 132.0
5.15 5.67 45. 1-3/4 124.0 133.0 153.0
5.91 6.50 48. 1-7/8 141.0 152.0 174.0
6.72 7.39 51. 2 160.0 172.0 198.0
7.59 8.35 54. 2-1/8 179.0 192.0 221.0
8.51 9.36 57. 2-1/4 200.0 215.0 247.0
6 x 37 only
9.48 10.4 61. 2-3/8 222.0 239.0 274.0
10.5 11.6 64. 2-1/2 244.0 262.0 302.0
Perimeter Cable -
Deck Lashing
6x15+7
6x15+7 Fiber Core Lashing Wire Rope
Size Rope Breaking Strength* Approx Weight Per
Diameter In Pounds Foot In Pounds
1/2" 12,500 .32
5/8" 19,100 .45
3/4" 27,600 .61
* Listed for comparison only. Actual operating loads may
vary, but should never exceed recommended design factor
or 1/7 of catalog breaking strength.
572 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIRE ROPE AND ACCESSORIES
Wire Rope 7 x 7 Stainless Steel PVC Coated
Wire Rope Sleeves Aluminum
Wire Rope Thimbles
Hot Dipped Galvanized
Wire Rope Thimbles
Heavy Duty Forged - Hot Dipped Galvanized
Wire Rope Thimbles
Stainless Steel
Not in the catalog? Give us a call - we are
constantly adding new items to our inventory
Wire Rope 7 x 7 Hot Dipped Galvanized
Wire Rope 7 x 19 Hot Dipped Galvanized
Wire Rope 7 x 19 Stainless Steel
Size Part No. Size Part No.
3/64 4DWIRS7x7 3/32 9DWIRS7x7
1/16 6DWIRS7x7 3/16 18DWIRS7x7
Wire Dia. Coated Dia. Part No.
3/64 1/16 4D6WRPH/7X7
1/16 3/32 6D9WRPH/7X19
1/8 3/16 12D18WRPH/7X19
3/16 1/4 18D25WRPH/7X19
1/4 5/16 25D31WRPH/7X19
Description Part No.
1/16 6DWRSA
3/32 9DWRSA
1/8 12DWRSA
5/32 15DWRSA
3/16 18DWRSA
1/4 25DWRSA
5/16 31DWRSA
3/8 37DWRSA
Description Part No.
1/8 12DWRTH
3/16 18DWRTH
1/4 25DWRTH
5/16 31DWRTH
3/8 37DWRTH
1/2 50DWRTH
5/8 62DWRTH
3/4 75DWRTH
Description Part No.
1/4 25DWRTH/HD
3/8 37DWRTH/HD
1/2 50DWRTH/HD
3/4 75DWRTH/HD
7/8 87DWRTH/HD
Description Part No.
1/8 12DWRTS
3/16 18DWRTS
1/4 25DWRTS
5/16 31DWRTS
3/8 37DWRTS
7 x 7 Galvanized Cable
Approx. Breaking
Size Weight per Strength
Rope Dia. 1000 ft in lb in lb Part No.
1/16** 7.5 480 6DWIRH/7X7
5/64** 11.0 650 7DWIRH/7X7
3/32** 16.0 920 9DWIRH/7X7
1/8 28.5 1,700 12DWIRH/7X7
5/32 43.0 2,600 15DWIRH/7X7
3/16 62.0 3,700 18DWIRH/7X7
7/32** 86.0 4,800 21DWIRH/7X7
1/4** 106.0 6,100 25DWIRH/7X7
5/16** 167.0 9,200 31DWIRH/7X7
3/8** 236.0 13,300 37DWIRH/7X7
7 x 7 Galvanized Cable
Approx. Breaking
Size Weight per Strength
Rope Dia. 1000 ft in lb in lb Part No.
3/32 17.4 1,000 9DWIRH/7X19
1/8 29 2,000 12DWIRH/7X19
5/32 45 2,800 15DWIRH/7X19
3/16 65 4,200 18DWIRH/7X19
7/32** 86 5,600 21DWIRH/7X19
1/4** 110 7,000 25DWIRH/7X19
5/16** 173 9,800 31DWIRH/7X19
3/8** 243 14,400 37DWIRH/7X19
7 x 19 Stainless Steel - Type 304
Approx. Breaking
Size Weight per Strength
Rope Dia. 1000 ft in lb in lb Part No.
1/16** 7.5 500 6DWIRS/7X19
3/32** 17 920 9DWIRS/7X19
1/8** 29 1,760 12DWIRS/7X19
5/32** 45 2,400 15DWIRS/7X19
3/16 65 3,700 18DWIRS/7X19
7/32** 86 5,000 21DWIRH/7X19
1/4** 110 6,400 25DWIRS/7X19
5/16** 173 9,000 31DWIRS/7X19
3/8** 243 12,000 37DWIRS/7X19
**According to federal specifications RR-W-4100. Meeting
dimensional and strength requirements of Mil-W-83420D.
573
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WIRE ROPE ACCESSORIES / ROPE
Forged Wire Rope Clips Galvanized Malleable Wire Rope Clips Galvanized
Malleable Wire Rope Clips
Stainless Steel
Size Part No.
1/8 12DFWRH
3/16 18DFWRH
1/4 25DFWRH
5/16 31DFWRH
3/8 37DFWRH
1/2 50DFWRH
9/16 56DFWRH
5/8 62DFWRH
3/4 75DFWRH
7/8 87DFWRH
1 100DFWRH
1-1/8 112DFWRH
1-1/4 125DFWRH
1-1/2 150DFWRH
Size Part No.
1/16 6DMWRH
5/64 7DMWRH
3/32 9DMWRH
1/8 12DMWRH
3/16 18DMWRH
1/4 25DMWRH
5/16 31DMWRH
3/8 37DMWRH
7/16 43DMWRH
1/2 50DMWRH
9/16 56DMWRH
5/8 62DMWRH
3/4 75DMWRH
7/8 87DMWRH
1 100DMWRH
1-1/8 112DMWRH
1-1/4 125DMWRH
Size Part No.
1/16 6DMWRS
5/64 7DMWRS
3/32 9DMWRS
1/8 12DMWRS
3/16 18DMWRS
1/4 25DMWRS
5/16 31DMWRS
3/8 37DMWRS
1/2 50DMWRS
Twisted Polypropylene
Twisted yellow poly is a high strength,
lightweight rope. Resistant to rot, mildew,
petroleum products and most chemicals. High
strength polypropylene is an excellent all
purpose utility rope for home, farm, camping
and tie-downs. Floats on the water’s surface
and may be stored wet.
Twisted Manila
Natural manila rope is resistant to
sunlight, does not melt like synthetic
ropes and has little stretch. Provides
excellent knot holding ability and
is the strongest and highest quality
natural fiber rope.
Part Nos. 5HM-0049 to 0058 are put up on standard reels.
Rope
Part No. Size Tensile lb
5HM-0010 1/4” x 50’ 1250
5HM-0011 1/4” x 100’ 1250
5HM-0012 3/8” x 50’ 2700
5HM-0013 3/8” x 100’ 2700
5HM-0014 1/2” x 50’ 4200
5HM-0015 1/2” x 100’ 4200
5HM-0022 5/16” x 600’ 1900
5HM-0021 1/4” x 600’ 1250
5HM-0024 3/8” x 600’ 2700
5HM-0025 3/8” x 1,200’ 2700
5HM-0026 1/2” x 600’ 4200
5HM-0027 1/2” x 1,200’ 4200
5HM-0028 5/8” x 600’ 6200
5HM-0029 3/4” x 600’ 8500
Rope
Part No. Size Tensile lb
5HM-0005 1/4” x 50’ 540
5HM-0006 1/4” x 100’ 540
5HM-0068 3/8” x 50’ 1215
5HM-0069 3/8” x 100’ 1215
5HM-0070 1/2” x 50’ 2385
5HM-0071 1/2” x 100’ 2385
5HM-0049 1/4” x 600’ 540
5HM-0050 3/8” x 600’ 1215
5HM-0052 1/2” x 600’ 2385
5HM-0053 5/8” x 600’ 3960
5HM-0054 3/4” x 600’ 4860
5HM-0055 7/8” x 600’ 6930
5HM-0056 1” x 600’ 8100
5HM-0057 1-1/4” x 600’ 12150
5HM-0058 1-1/2” x 600’ 16650
Solving your application problems
and supplying the technical edge
are some of NEFCO’s value
added services saves you time
and money!
574 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CHAIN AND ACCESSORIES
Grade 30
Proof Coil Chain - Self Colored
Grade 30
Proof Coil Chain - Zinc Plated
Grade 40 High Test Chain
A general utility chain for farm, industry
and home applications such as: pulling
stumps, log chain, cargo lashing, pipe
line hanging, tailgate, guard rail, tow and
switch chain.
Grade 40 chain features both high
tensile strength and resistance to wear
needed by modern hauling and heavy
duty trucking, farm and construction
firms. Working load limits exceed those
of ordinary low carbon or general utility
chain.
* Hot Dip Galv.
Description Capacity Part No.
3/16 800 18DPCC
1/4 1300 25DPCC
5/16 1900 31DPCC
3/8 2650 37DPCC
1/2 4500 50DPCC
5/8 6900 62DPCC
Description Capacity Part No.
3/16 800 18DPCCZ
1/4 1300 25DPCCZ
5/16 1900 31DPCCZ
3/8 2650 37DPCCZ
1/2 4500 50DPCCZ
Description Capacity Part No.
1/4 2600 25DHTC
5/16 3900 31DHTC
3/8 5400 37DHTC
3/8* 5400 37DHTCH
7/16* 7200 43DHTCH
Grade 30
Proof Coil Chain - Hot Dip
Galvanized
Grade 70 Transport Chain
Single Jack Chain - Zinc Plated
Grade 70 is extremely strong for its light
weight and is used primarily for load
binding in the transportation industry.
However, it is also used extensively
on farms, in lumbering, towing, and
construction. Grade 70’s high strength to
weight ratio is achieved by special heat
treating. It resists wear because of its
exceptional hardness properties.
Size Capacity Part No.
1/4" 3150 25DTRC
5/16" 4700 31DTRC
3/8" 6600 37DTRC
1/2" 11300 50DTRC
A light duty wire chain for uses such as
suspending flower pots, scales, children’s
toys, and electrical light fixtures.
Size Length Part No.
No. 8 100 ft 8NSJCZ
No. 10 100 ft 10NSJCZ/100FT
No. 10 500 ft 10NSJCZ/500FT
No. 12 100 ft 12NSJCZ/100FT
No. 12 1000 ft 12NSJCZ/1000FT
A general utility chain for hardware
and manufacturing applications such
as: playground and gym equipment,
fluorescent lights, boats, gates, porch
swings, halter, kennel, dog runner, cow
ties, and tie out chains.
Description Pkg. Size Part No.
No.1 1100 1NTECZ/REEL
No.3 2000 3NTECZ/REEL
Description Capacity Part No.
1/4 1300 25DPCCH
5/16 1900 31DPCCH
3/8 2650 37DPCCH
1/2 4500 50DPCCH
Proof Coil Chain - Stainless Steel
Tenso Chain
Accoloy Grade 80 Chain
Chain meets the latest guidelines of the
National Association of Chain Manufacturers
(NACM) for Grade 80 chain and ASTM A391/
A391M-93. Accoloy A8A chain has excellent
energy absorption properties. For fast
identification Accoloy chain is embossed A8A
on every link. Approved for overhead lifting.
Size Part No. WWL
9/32 511610402 3,500
3/8 511310602 7,100
1/2 511610802 12,100
Description Capacity Part No.
1/8 12DPCCS
3/16 18DPCCS
1/4 25DPCCS
Chain and Accessories
Spas Screw Pin
Anchor Shackles
Working load limit is
embossed on each
piece.
Size WLL - lb HD Galv.
3/16 666 18DASSH
1/4 1000 25DASSH
5/16 1500 31DASSH
3/8 2000 37DASSH
7/16 3000 43DASSH
1/2 4000 50DASSH
5/8 6500 62DASSH
3/4 9500 75DASSH
7/8 13000 87DASSH
1 17000 100DASSH
1-1/8 19000 112DASSH
1-1/4 24000 125DASSH
1-3/8 27000 137DASSH
1-1/2 34000 150DASSH
SPAS Screw Pin Anchor
Shackles Grade 80
Working Load Limit is embossed on each
piece. Forged Alloy steel shackles and alloy
pins for greater strength and abrasion
resistance. Heat treated and tempered.
Size WLL Part No.
3/8" 2500 ACC593500060
1/2" 5000 ACC593500080
5/8" 8000 ACC593500100
3/4" 12000 ACC593500120
7/8" 15000 ACC593500140
1" 25000 ACC593500160
1-1/4" 36000 ACC593500200
1-1/2" 50000 ACC593500240
575
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CHAIN AND ACCESSORIES
Grade 70
Clevis Grab Hooks
Designed for use with
Grade 70 transport chain
or Grade 40 Hi Test.
* Ratchet Style
Clevis Grab
Hooks
For use with grade 30
and 40 chain
“S” Hooks
Zinc Plated
Machinery
Lifting Eyes
Clevis Slip Hooks Zinc Plated
Connecting
Links
Quick Links
Zinc Plated
Load Binders
These binders swivel 360 degrees at both
ends. The handles of the lever binders
toggle away from the load.
Description Capacity Part No.
1/4 2600 25DCSH
5/16 3900 31DCSH
3/8 5400 37DCSH
1/2 9200 50DCSH
Trade Size Description Part No.
No.8 .135 x 1-5/16 ACC341520081
No.9 .162 x 1-3/8 ACC341520091
No.10 .148 x 1-3/4 ACC341520101
No.63 .105 x 1-1/8 ACC341520631
No.66 .375 x 3-1/4 ACC341520660
No.98 .312 x 2-5/8 ACC341520981
No.110 .250 x 2 ACC341521101
No.498 .120 x 1-1/2 ACC341524981
No.526 .250 x 2-1/4 ACC341525261
No.901* .375 x 2-3/4 ACC341529010
No.902* .406 x 2-3/4 ACC341529020
No.903* .468 x 3-3/8 ACC341529030
Plain Shoulder
Description Pattern Pattern
1/4-20 x 1 25C100MEP 25C100MES
5/16-18 x 1-1/8 31C112MEP 31C112MES
3/8-16 x 1-1/4 37C125MEP 37C125MES
7/16-14 x 1-3/8 43C137MEP 43C137MES
*Heat Treated - Used for trailer safety
chain assemblies and other applications
Description Capacity Part No.
1/4 2600 25DCSHZ
5/16 3900 31DCSHZ
3/8 5400 37DCSHZ
Description Capacity Part No.
5/16 1950 31DCOL
3/8 2750 37DCOL
7/16 3625 43DCOL
Description Capacity Part No.
1/8 220 12DQULZ
3/16 660 18DQULZ
1/4 880 25DQULZ
5/16 1760 31DQULZ
3/8 2200 37DQULZ
Size Capacity Part No.
1/4 4700 25DCGH/GR70
5/16 6600 31DCGH/GR70
3/8 11300 37DCGH/GR70
Range WLL-lb Part No.
5/16-3/8 4700 ACC441000320BX320
3/8-1/2 6600 ACC441000400BX400
3/8-1/2* 6600 ACC441000410BXR410
Clevis Grab Hooks Zinc Plated
Description WLL - lb Part No.
1/4 2600 25DCGH
5/16 3900 31DCGH
3/8 5400 37DCGH
7/16 7200 43DCGH
1/2 9200 50DCGH
5/8 1300 62DCGH
Description Capacity Part No.
1/4 2600 25DCGHZ
5/16 3900 31DCGHZ
3/8 5400 37DCGHZ
Clevis Slip
Hooks
Double Clevis
Connector Zinc Plated
Description Capacity Part No.
5/16 4700 31DDOCZ
3/8 6600 37DDOCZ The Bindex® Load Binder Line
Acco High Strength Transportation Load Binders are of the
highest quality drop forged construction and meets DOT
requirements for truck tiedown use.These tough binders swivel
360° at both ends and the handles of the lever binders toggle
away from the load allowing easier release under all load
conditions. For all heavy duty interstate transport users.
Notes:
(1) Working load limits are those of the maximum chain size and grade normally used
with the load binders.
(2) For safety reasons, extensions should not be added to load binder handles!
† The values for working loads shown here shall be used for calculating the number of
chain tiedown assemblies required to secure an article in compliance with Department
of Transportation Regulations 393,102(b).
Chain Binder
Working
Load Lever Take Wt. Pcs
Binder Limit Length Up Ea. per Part
No. Size/Grade lb*† inches inches lb Carton No.
BX-320 5/16” Grade 70 4,700 16 4-1/2 7 5 4410-00320
3/8” Grade 40 5,400
BXR-310 5/16” Grade 70 4,700 15-3/4 8 9-1/2 5 4410-00310
3/8” Grade 40 5,400
BXR-410 3/8” Grade 70 6,600 15-3/4 8 11 5 4410-00410
1/2” Grade 40 9,200
thePushover® Load Binders
Plain Shoulder
Description Pattern Pattern
1/2-13 x 1-1/2 50C150MEP 50C150MES
9/16-12 x 1-1/4 56C175MEP 56C175MES
5/8-11 x 1-3/4 62C175MEP 62C175MES
3/4-10 x 2 75C200MEP 75C200MES
7/8-9 x 2-1/4 87C225MEP 87C225MES
1-8 x 2-1/2 100C250MEP 100C250MES
1-1/8-7 x 3 112C300MEP 112C300MES
1-1/4-7 x 3-1/2 125C350MEP 125C350MES
576 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CHAIN ACCESSORIES / CM PULLERS
Description Part No.
1/4 x 2 25C200FRE
5/16 x 4 31C400FRE
3/8 x 4-1/2 37C450FRE
3/8 x 6 37C600FRE
1/2 x 3-3/4 50C375FRE
1/2 x 3-1/2 50C350FRE
1/2 x 4-13/16 50C481FRE
1/2 x 6 50C600FRE
1/2 x 12 50C1200FRE
Description Part No.
5/8 x 2 62C200FRE
5/8 x 6 63C600FRE
5/8 x 12 62C1200FRE
1/4 x 6 75C600FRE
3/4 x 12 75C120FRE
7/8 x 6 87C600FRE
7/8 x 12 87C1200FRE
1-1/4 x 12 125C1200FRE
CM Puller
Optional shorter level 3/4 ton optional load sentry 1-1/2 ton 3 ton
6 ton optional anchor sling (3/4 and 1-1/2 ton) latchlok type hook
optional load limiter
The CM Puller is designed for heavy-duty construction and industrial
applications.
Used to pull, lift, drag or stretch, it features:
• Tough aluminum alloy construction and powder coat finish
• Weatherproof for outdoor service
• Simple construction with fewer parts for ease of maintenance and
lower inventories
• Hoistaloy hardened steel link type load chain for strength, long wear
life and flexibility
• Weatherized Weston-type automatic braking system for positive
load control
• Easy, one-hand operation and control – only 58 pounds of pull
required for 3/4 ton model capacity
• Forged upper and lower hooks with latches standard
• Free wheeling for fast and easy attachment to load
• Upper and lower Latchlok hooks available for all capacities
• Optional Load Limiter protection device stops transmission of lever
forces protecting against dangerous overload
• Optional anchor sling simplifies attachment to allow anchor hook to
swivel in tight space applications (3/4 & 1-1/2 ton units only)
• Optional Load Sentry warns of overload condition
• Optional shorter lever for 3/4 and 1-1/2 ton units available
• Optional zinc-plated chain available
• Unlimited lift
• Lifetime warranty
• Metric rated
• Made in U.S.A.
Puller Specifications - Standard Unit
Pull to Minimum Hook Approx.
Rated Standard Lift Full Distance Lever Throat Ship.
Capacity Product Lift† Loads Between Length Openings Weight
(tons) Code (ft) (lb) Hooks (in) (in) Reeving (in) (lb)
3/4 4043 5 58 10-3/4 21-1/4 1 1-1/32 16
1-1/2 4045 5 89 14-1/4 21-1/4 1 1-1/8 26
3 4047 5 95 16-15/16 21-1/4 2 1-7/32 38
6 4050 5 96 21-3/8 21-1/4 4 1-3/4 73
Forged Rod Ends
Latch Lock
Type Hok Optional
Load Limiter
1-1/2 ton 3 ton 6 ton
Optional
Anchor Sling
(3/4 and
1-1/2 ton)
Optional
Shorter
Lever
3/4 ton
Optional
Load
Sentry
577
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CM HOISTS
Cyclone Hand Chain Hoist
One of the most popular and reliable
hoists ever designed, the cyclone combines superior
engineering, efficiency and durability. Available in a
variety of capacities from 1/4 ton to 10 tons, cyclone
features:
• Most interchangeability of parts in the industry
• Standard Load Limiter for simple, automatic overload
protection
• Enclosed contoured Weston-type automatic brake for
positive load control
• High-efficiency spur gearing for greater lift with minimum
effort
• Rugged Hoistaloy chain for added strength and durability
• Fully machined, forged liftwheel pockets for easier lifting
and smooth free chaining
• High strength aluminum alloy castings in frame and covers
• Inspected over 75 times to meet or exceed HMI and ASME/
Specifications
Minimum
Rated Standard Distance Overhauled Chain Pull to Ship.
Capacity Part Lift† Between To Lift Load Lift Full Wt.
(tons) No. (ft) Reeving Hooks (in) One Foot (ft) Load (lb) (lb)
1/4 4621 8 1 12-7/8 22-1/2 23 37
1/2 4622 8 1 12-7/8 22-1/2 46 37
1 4624 8 1 14 30 69 40
1-1/2 4625 8 1 17-5/16 40-1/2 80 65
2 4626 8 1 17-5/16 52 83 64
3 4627 8 2 21-1/2 81 85 96
4 4628 8 2 21-1/2 104 88 96
5 4629 8 3 24-1/4 156 75 128
6 4630 8 3 25-1/4 156 90 132
8 4631 8 4 34-1/2 208 89 235
10 4632 8 5 35-1/2 260 95 249
Specifications
Chain Pull Hand Chain Approx.
Rated Standard To Lift Rated Overhauled Shipping
Part Capacity Lift Load To Lift Load Weight
No. (tons) (ft) (lb) One Foot (ft) (lb)
2202 1/2 8 53 29 15
2216 1/2 12 53 29 22
2208 1/2 15 53 29 25
2231 1/2 20 53 29 30
2263 1/2 30 53 29 38
2204 1 8 77 37 22
2217 1 12 77 37 29
2210 1 15 77 37 32
2262 1 20 77 37 38
2264 1 30 77 37 48
2206 2 8 82 80 57
2218 2 12 82 80 6
2213 2 15 82 80 71
2233 2 20 82 80 80
2272 2 30 85 80 85
2207 3 8 65 154 85
2230 3 12 65 154 93
2214 3 20 65 154 109
2209 5 8 105 147 82
2215 5 12 105 147 96
2234 5 20 105 147 123
2212 10 8 109 289 164
†Can be supplied with longer lifts.
ANSI performance and safety standards
• Standard hand chain drop is 2 feet less than lift,
(example: 8 foot lift hoist has 6 foot hand chain
drop)
• Chain containers, zinc-plated load and hand
chain, aluminum unwelded hand chain, Latchlok
hooks, bronze hooks, eye-type suspension,
bullard hooks and units without Load Limiter
optional, depending on capacity
• Lifetime warranty
• Metric rated
• Made in U.S.A
1/4 to
2 ton
Capacity
3 and 4 ton
Capacity
CM Series 622 Hand
Chain Hoist
• Simple, efficient, economical design
• Equipped with hardened load chain for
flexibility and long wear
• Compact design, low headroom and lightweight
steel construction for easy installation, even in
confined spaces
• Weston-type load brake requires no lubrication
• Hand wheel cover with guide slots minimizes
jamming and slipping
• Swivel hooks with latches reduce twisting of
chain and unintentional unhooking of load when
chain is slack
• Standard hand chain drop is 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain
drop)
• One-year warranty Overhauled
• Metric rated
• Imported
578 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CM HOISTS
Specifications - Two Speed
Stan-
Rated dard Lift Product Code†
Capacity Lift Speed Motor Less Suspension
(tons) (ft) (F.P.M.) H.P. Model Reeving 230-3-60 460-3-60
1/8 10 10/32 1/4 A2 1 2707 2708
10 20/60 1/2 AA2 1 2717 2718
1/4 10 5/16 1/4 B2 1 2727 2728
10 10/32 1/2 C2 1 2737 2738
1/2 10 2.5/8 1/4 E2 2 2747 2748
10 5/16 1/2 F2 1 2757 2758
10 10/32 1 J2 1 3502 3503
10 21/64 2 JJ2 1 3549 3550
1 10 2.5/8 1/2 H2 2 2767 2768
10 5/16 1 L2 1 3504 3505
10 10/32 2 LL2 1 3553 3554
2 10 2.5/8 1 R2 2 3506 3507
10 5/16 2 RR2 2 3561 3562
3 10 1.75/5.5 1 RT2 3 9511 9513
10 3.5/11 2 RRT2 3 9512 9514
Working
Load Jaw
Limit Part Capacity Dimensions (inches)
(lb) No. (in) A B C D E F
1,100 695232 0-5/8 3-3/4 7-1/2 2 1-1/8 2 1-1/2
3,300 695233 0-3/4 5 9-1/2 2 1-7/8 2-3/4 3-3/8
4,400 695234 0-1-1/4 7-5/8 13-3/4 3-1/8 2-7/8 3-3/4 4-3/8
6,600 695235 0-1-1/4 7-5/8 14 3-1/8 2-7/8 3-3/4 4-1/2
8,800 695236 0-1-1/4 7-1/2 14-1/4 3-1/8 2-1/4 3-3/4 3-7/8
Specifications
Adj. for Standard S-Beams
Rated Depth Flange Tread Net
Capacity Part of Beam Width Diameter Weight
(tons) No. (in) (in) (in) (lb)
1/2 3302 3-15 2-1/2-5-5/8 2-9/32 15
1 3304 5-24 3-8 3-15/32 34
2 3306 6-24 3-5/8-8 3-15/16 50
3 3307 8-24 4-8 5-1/8 95
5 3309 10-24 4-5/8-8 6-1/8 172
Lodestar Electric
Chain Hoist
The balanced, integrated, proven
design of the lodestar has made it the
most popular electric chain hoist in the
industry.
Lodestar gives you more value for your
money including:
• Up to 3 ton capacities for heavy-duty
industrial applications
• Gear train lifetime lubricated with non-
oxidizing grease
• Precision machined and hardened liftwheel
with hardened chain guides for precise chain
liftwheel fit
• Gearing designed for exceptionally long life
and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4)
• Hoist duty motor, standard Protector
overload device and standard screw type
limit switches
• Hardened, forged steel, latch type hooks and
Hoistaloy load chain for long, dependable
service
• Easy to install and maintain
• No special tools required to disassemble
• High reliability and long life
• Designed for greater productivity, efficiency
and economy
• Warranty
• Hoist thoroughly inspected and tested to
over 125% of rated load prior to shipment
• Meets ASME B30.16
• Rated
• Made in U.S.A.
CZ92 Universal Plate Clamps
• Clamps lift and turn over plates in one smooth operation
• Enables plates to be
turned over or lifted from
the horizontal to true
vertical position
• Available with standard
hook ring for direct
fitting onto crane hook
• Features hardened steel
jaws for positive grip and
locking mechanism
• Suitable for all structural steel up to 300 Brinell surface
hardness. For stainless steel or other materials, please contact
NEFCO
• Imported
†Specify voltage 230 or 460
Note: 695232 supplied without lock lift only one at a time
Triple
Reeved
Double
Reeved
CM Series 633 Wide Range Trolley
Simple, rugged, built for trouble-free service and ease
of operation across a wide range
of beam applications. Series 633
Features:
• Rugged steel side plates formed to
include bumpers and trolley guards
• Frames connected by steel equalizer pin,
secured by two nuts on each side
• Universal tread flanged trackwheels equipped with shielded
ball bearings
• Easy rolling on American standard shapes, wide flange shapes
or patented rail
• Hardened wheels and axles for added strength and durability
• Spacer washers can be shifted inside or outside for easy
adjustment to wide range of beams
• To be used with hook suspended hoist
• Suspension plate for easy attachment is standard
• Bearings prepacked with lifetime lubricant
• One-year warranty • Imported
579
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CHAIN SLINGS
Type One End Opposite End
Single Chain Slings
SOS Oblong Link Sling Hook
SOG Oblong Link Grab Hook
SGS Grab Hook Sling Hook
SGG Grab Hook Grab Hook
SSS Sling Hook Sling Hook
SOF Oblong Link Foundry Hook
SOO Oblong Link Oblong Link
Double Chain Slings
DOS Oblong Link Sling Hooks
DOG Oblong Link Grab Hooks
DOF Oblong Link Foundry Hooks
Triple Chain Slings
TOS Oblong Link Sling Hooks
TOG Oblong Link Grab Hooks
TOF Oblong Link Foundry Hooks
M
QOS Oblong Link Sling Hooks
QOG Oblong Link Grab Hooks
QOF Oblong Link Foundry Hooks
How to Order
The following information should be given on
orders or inquiries for chain slings:
1. Size: this is specified by the size of the material
from which the chain is made, determined by
working load limit required.
2. Reach: this is the length, including attachments,
measured from bearing point to bearing point.
3. Type: select and specify proper type of sling
from list shown
Examples: S-Single O-Oblong Link S-Ling Hook
4. Attachments: unless otherwise specified
standard master links and hooks as given herein
will be used. When other than standard master
links or hooks are required, we should be given
a complete description or a drawing of the
requested substitute.
When hot galvanizing is specified our
recommended working load limits must be
reduced
Single
Chain Double Chain Slings/lb Triple and Quad Sling/lb
Size of Chain lb Type D Type T and Type Q
in mm at 90º 60º 45º 30º 60º 60º 45º 45º 30º 30º
9/32 7 3,500 6,100 4,900 3,500 9,100 7,400 5,200
3/8 10 7,100 12,300 10,000 7,100 18,400 15,100 10,600
1/2 13 12,000 20,800 17,000 12,000 31,200 25,500 18,000
5/8 16 18,100 31,300 25,600 18,100 47,000 38,400 27,100
3/4 20 28,300 49,000 40,000 28,300 73,500 60,000 42,400
7/8 22 34,200 59,200 48,400 34,200 88,900 72,500 51,300
1 26 47,700 82,600 67,400 47,700 123,900 101,200 71,500
1-1/4 32 72,300 125,200 102,200 72,300 187,800 153,400 108,400
Important:
Working Load Limit should not be exceeded.
To determine which chain size and leg style are
best suited to your requirements - use this working
load limit table as a guide. The table gives the
working load limits of 9/32” through 1-1/4” Accoloy
Chain in 1, 2, 3 and 4 leg styles. You know the
maximum load (or loads) you will lift and the angle
of lift involved - working to the left from these
loads and angles gives you the proper chain size for
your sling. Working Load Limits of the chain and
components is established as pounds applied at the
indicated degrees from horizontal.
Types of Chain Slings
580 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WIRE ROPE SLINGS / LUG-ALL HOISTS
Specifications - Single Leg Wire Rope Slings
Wire
Rope
Class
Rope
Diam.
Single Leg Rated Capacity (Ton) Min.
Sling
Length
Vertical Choker Basket
6 x 19
1/4" 0.65 .048 1.3 1' 6"
5/16" 1 0.74 2 1' 9"
3/8" 1.4 1.1 2.8 2' 0"
7/16" 1.9 1.4 3.8 2' 3"
1/2" 2.5 1.9 5 2' 6"
9/16" 3.2 2.4 6.4 2' 9"
5/8" 3.9 2.9 7.8 3' 0"
3/4" 5.6 4.1 11 3' 6"
7/8" 7.6 5.6 15 4' 0"
1" 9.8 7.2 19.6 4' 6"
1-1/8" 12 9.1 24 5' 0"
6 x 37
1-1/4" 15 11 30 5' 6"
1-3/8" 18 13 36 6' 0"
1-1/2" 21 16 42 7' 0"
Wire Rope and Slings
Wire rope slings are strong, efficient and reliable accessories in
the material handling industry. Wire rope functions as an excellent
sling material in applications where a combination of strength and
abrasion are necessary. Wire rope slings are available in an array
of lengths and configurations to fit almost any application. Stren-
Flex® features wire rope slings made with high quality domestic
wire rope that are tagged with all appropriate ASME information
and capacities. Import wire rope slings are also available.
How to order wire rope slings:
1. Determine the weight of the load.
2. Determine the type of hitch to be used.
3. Determine the type of sling to be used. (Will the sling have
eyes, hooks or thimbles?)
4. Length of the sling measured from pull to pull.
5. Wire rope construction if not standard 6 x 19 or 6 x 37.
6. Double check diameter, length and sling type with the WLL
(Working Load Limit).
All LugAlls are guaranteed for one year against defective parts and/or workmanship
1/2 to 3-ton capacities • Cable lengths to 38 ft. • Lightweight from 7 lb.
• Marine grade • Cable return crank • Rapid lowering • Choice of safety hooks
1. High-strength aluminum
alloy frame.
2. Interlocking pawl system
3. All cable stores on drum
4. Reversible safety handle
5. Self-cleaning open
construction
6. Highly flexible 7 x 19
aircraft cable
7. Piled for-life bearings
8. Extra hook and pulley
9. Forged-steel safety
hooks.
“A” Rig “B” Rig “C” Rig
Handle Handle Handle
Pull Pull Pull
For Min. For Min. For Min.
Full Lifting Distance Full Lifting Distance Full Lifting Distance Total
Cap. Load Dist- Between Cap. Load Dist- Between Cap. Load Dist- Between Cable Weight
Capacity Ton Model No.’s in lb (lb) ance Hooks in lb (lb) ance Hooks in lb (lb) ance Hooks Dia. Length (lb)
1/2 100-15* or 115-R* - - - - 1000 77 15’ 16” - - - - 3/16” 16’ 7
3/4 1500-25 or 125-R 1500 67 12-1/2’ 21 750 65 25’ 16” 750 67 25’ 10” 5/32” 26’ 8-1/2
1-1/8 2250-15 or 215-R 2250 86 7-1/2’ 21 1125 83 15’ 16” 1125 86 15’ 10” 3/16” 16’ 8-3/4
2250-20 2250 86 10’ 21 1125 83 20’ 16” 1125 86 20’ 10” 3/16” 21’ 9-1/4
1-1/2 3000-10 or 310-R 3000 100 5’ 21 1500 97 10’ 16” 1500 100 10’ 10” 7/32” 11’6” 9
1-1/8 2250-38 or 238-R 2250 100 19’ 23-1/2 1125 83 38’ 18” 1125 86 38’ 10” 3/16” 39’6” 13-3/4
1-1/2 3000-30 or 330-R 3000 100 15’ 23-1/2 1500 97 30’ 18” 1500 100 30’ 10” 7/32” 31’6” 13-3/4
2 4000-20 or 420-R 4000 115 10’ 26-1/2 2000 110 20’ 18-1/2” 2000 115 20’ 13” 1/4” 22’ 15-1/2
3 6000-15 6000 105 7-1/2’ 34 3000 105 15’ 26-1/2” 3000 105 15’ 17” 5/16” 18’ 33
Suffix “R” denotes rapid lowering units. * Without pulley block for marine grade (with stainless steel cable, anodized
castings and oiled-for-life bearings throughout) Add suffix “M” to Model No.
ML Med. Small
Frame Frame Frame
LugAll Portable Cable Winch Hoists
Lift, Lower, Pull, Bend, Stretch, tighten at an angle, in any position
(when used in accordance with accepted rigging practices)
Lightweight and portable, easy to carry and easy to rig. Unlimited applications in industry and
construction. Safety features include a unique reversible handle that bends when the hoist is
severely overloaded, and an interlocking pawl system that provides positive control.
A variety of Lug-All models are available in four basic frame sizes. Options include rapid
lowering for backing off 4 notches-per-stroke, and marine grade for highly corrosive conditions.
581
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
NYLON SLINGS
Part No. Web
Width Ply
Rated Capacity in Pounds Basket Leg Angle Eye
Length
Eye
Width
Rigging Technique
Vertical Choker Basket 60° 45° 30°
EEF-1-901
1"
11,600 1,200 3,200 2,800 2,300 1,600 8" 1"
EEF-2-901 23,200 2,500 6,400 5,500 4,500 3,200 8" 1"
EEF-3-901 34,100 3,300 8,200 7,100 5,800 4,100 12" 1"
EEF-4-901 46,100 4,900 12,200 10,500 8,600 6,100 12" 1"
EEF-1-902
2"
13,200 2,500 6,400 5,500 4,500 3,200 10" 2"
EEF-2-902 26,400 5,000 12,800 11,100 9,000 6,400 10" 2"
EEF-3-902 38,200 6,600 16,500 14,300 11,600 8,200 12" 2"
EEF-4-902 412,200 9,800 24,400 21,100 17,200 12,200 12" 2"
EEF-1-903
3"
14,800 3,800 9,600 8,300 6,800 4,800 11" 1.5"
EEF-2-903 28,900 7,200 17,800 15,400 12,600 8,900 11" 1.5"
EEF-3-903 312,300 9,900 24,600 21,300 17,400 12,300 15" 1.5"
EEF-4-903 418,000 13,500 36,000 31,100 25,400 18,000 15" 1.5"
EEF-1-904
4"
16,400 5,000 12,800 11,100 9,000 6,400 12" 2"
EEF-2-904 212,000 9,600 24,000 20,800 17,000 12,000 12" 2"
EEF-3-904 315,300 12,200 30,600 26,500 21,600 15,300 16" 2"
EEF-4-904 424,000 18,000 48,000 41,500 33,900 24,000 16" 2"
EEF-1-905
5"
18,000 6,400 16,000 13,800 11,300 8,000 14" 1.75"
EEF-2-905 214,250 11,400 28,500 24,600 20,100 14,250 14" 1.75"
EEF-3-905 322,500 18,000 45,000 38,900 31,800 22,500 18" 2.5"
EEF-4-905 430,000 22,500 60,000 51,900 42,400 30,000 18" 2.5"
EEF-1-906
6"
19,600 7,600 19,200 16,600 13,600 9,600 16" 2"
EEF-2-906 218,000 14,500 36,000 31,100 25,400 18,000 16" 2"
EEF-3-906 323,000 18,400 46,000 39,800 32,500 23,000 18" 3"
EEF-4-906 436,000 24,000 72,000 62,300 50,900 36,000 18" 3"
EEF-1-908
8"
112,800 10,000 25,600 22,200 18,100 12,800 20" 3"
EEF-2-908 222,800 18,000 45,600 39,500 32,200 22,800 20" 3"
EEF-3-908 334,000 27,200 68,000 58,900 48,000 34,000 24" 4"
EEF-4-908 445,000 36,000 90,000 77,900 63,600 45,000 24" 4"
EEF-1-910
10"
116,000 12,800 32,000 27,700 22,600 16,000 24" 3.5"
EEF-2-910 228,000 22,500 56,000 48,500 39,500 28,000 24" 3.5"
EEF-3-910 336,000 28,500 72,000 62,300 50,900 36,000 24" 5"
EEF-4-910 455,000 44,000 110,000 95,200 77,700 55,000 24" 5"
EEF-1-912
12"
119,200 15,400 38,400 33,200 27,100 19,200 24" 4"
EEF-2-912 233,600 26,750 67,200 58,200 47,500 33,600 24" 4"
EEF-3-912 346,000 36,500 92,000 79,600 65,000 46,000 26" 6"
EEF-4-912 466,000 52,800 132,000 114,300 93,300 66,000 32" 6"
Type 3/4 Heavy Duty Eye & Eye Sling (EE)
• All purpose, low-profile heavy duty sling.
• Available up to 12" with 1 to 4 plies.
• Vertical, choker or basket configuration.
• Gorilla-Guard® (high abrasion resistant) and Monster Edge®
(economical abrasion resistance, resists cutting and abrasion
on edges).
• Type 3 slings tapered at 3" standard.
582 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
NYLON SLINGS
• Less rigging weight
• Easy handling
• Color-coded capacity indication
• Red core warning fibers
• Models up to and including size 7 feature polyester core yarns and covers
• Roundslings following and including size 8 feature Cordura nylon covers for
increased abrasion resistance
• Saves money by extending the life of the body of the sling
• Double-wall cover under the body cover to protect load bearing yarns
Endless Roundslings (ERS)
Part No. Color Code
Capacity (Pounds) Minimum
Length (ft.)
Weight per
foot
Approx.
Diameter
(Relaxed)
Approx.
Width @
Load
Vertical Choker Vertical
Basket
ERS1 Purple 2,600 2,100 5,200 3.0 0.3 0.62" 1.12"
ERS2 Green 5,300 4,200 10,600 3.0 0.4 0.87" 1.50"
ERS3 Yellow 8,400 6,700 16,800 3.0 0.5 1.12" 1.87"
ERS4 Tan 10,600 8,500 21,200 3.0 0.6 1.12" 2.12"
ERS5 Red 13,200 10,600 26,400 3.0 0.8 1.37" 2.25"
ERS6 White 16,800 13,400 33,600 4.0 0.9 1.37" 2.50"
ERS7 Blue 21,200 17,000 42,400 4.0 1.2 1.75" 3.00"
ERS8 Orange 25,000 20,000 50,000 6.0 1.4 1.75" 3.30"
ERS9 Gray 31,000 24,800 62,000 6.0 1.7 2.25" 3.75"
ERS10 Maroon 40,000 32,000 80,000 6.0 2.1 2.50" 4.20'
ERS11 Brown 53,000 42,400 106,000 8.0 2.6 2.75" 4.62"
ERS12 Olive 66,000 52,800 132,000 8.0 3.2 3.12" 5.25"
ERS13 Black 90,000 72,000 180,000 8.0 4.1 3.62" 6.00"
End Fittings Part No. Width Length Working Load Limit
Flat Hook (FH) RTD1027PFH 2” 27’ 3,335 lbs.
RTD1030PFH 2” 30’ 3,335 lbs.
Snap Hook (SH) RTD1027PSH 2” 27’ 3,335 lbs.
RTD1030PSH 2” 30’ 3,335 lbs.
Wire Hook (WH) RTD1027PWH 2” 27’ 3,335 lbs.
RTD1030PWH 2” 30’ 3,335 lbs.
Flat Hook (FH) RTD1527PFH 3” 27’ 5,000 lbs.
RTD1530PFH 3” 30’ 5,000 lbs.
D-Ring (DR) RTD1527PDR 3” 27’ 5,000 lbs.
RTD1530PDR 3” 30’ 5,000 lbs.
Chain & Grab Hk (CG) RTD1527PCG 3” 27’ 5,000 lbs.
RTD1530PCG 3” 30’ 5,000 lbs.
Flat Hook (FH) RTD2027PFH 4” 27’ 5,000 lbs.
RTD2030PFH 4” 30’ 5,000 lbs.
D-Ring (DR) RTD2027PDR 4” 27’ 5,000 lbs.
RTD2030PDR 4” 30’ 5,000 lbs.
Chain & Grab Hk (CG) RTD2027PCG 4” 27’ 5,000 lbs.
RTD2030PCG 4” 30’ 5,000 lbs.
Heavy Duty Ratchet
Tie Downs
• 2", 3" & 4" wide heavy duty
webbing
• Available colors: (Yellow (2"-4")
and black (2" only).
583
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TWO-WAY RADIOS
RDX Series Business Two-Way Radio
The RDX series audio is 30% louder than previous XTX and
AX series radios. Manufactured with a die cast metal chassis
for increased durability; designed to meet tough Mil Spec 810
C,D,E,F and IP54/55 standard for shock, rain, humidity, salt, fog
sand/dust, high and low temperature. RDX Series is compatible
with the CLS, XTN and AX series and other radios operating
on the same frequency and code. This durable two-way radio
is ideally suited for construction, electrical, manufacturing/
warehousing, property management, and many other industries.
RDX Series Features (RDU2020)
• Range up to 250,000 sq. ft. or 20 floors indoors
• 2-watts of power
• 2 channel operation / 89 UHF business-exclusive
frequencies and 121 interference eliminator codes.
• Exceptional Audio Quality - 2000 mW of audio
output, speaker magnetic field reduction, wind-
noise reduction and improved RF specifications
• 3 Voice Scramble settings reduces eavesdropping
• Cloning compatible - Requires optional multi-unit
charger or cloning cable.
• VOX - Hands-Free use with audio accessory
• 3 different Call Tones
• 2 pin accessory plug (compatible with CLS, XTN & AX series)
• AA Battery Compatible (requires alkaline battery
frame accessory)
• Height: 4.5” H x 2.2” W x 1.6” D
• Weight: 8.6 ounces (with standard battery)
RDU2080d Additional Features
• 8 channel operation.
• Backlit LCD display featuring channel, frequency,
code, signal strength, battery status and other
programming features.
• Front panel programming buttons with Manager lock
CLS Series Business Two-Way Radio
Business communications made simple! The CLS radio is
ideally suited for retail stores, restaurants, schools,
hospitality, event coordination, small businesses
and more. No monthly fees or service contracts
required.
CLS 1110 / 1460 Features
• Up to 5 miles outdoors, 200,000 sq. ft.
indoors or 15 floors indoors
• 56 UHF business-exclusive frequencies
• 1watt technology
• One channel operation / 121 Interference
Eliminator Codes (38 analog, 83 digital)
• 3 Call Tones
• Cloning capable (requires optional multi-unit charger)
• 2 pin accessory connection (compatible with XTN and M-Series
Radios audio accessories)
• AAA Battery Compatible (requires optional accessory)
• Requires FCC License
• Height: 4.1” H x 2. 0 “ W x 1. 1 “ D (with antenna)
• Weight: 4.5 ounces
CLS Series Accessories:
• Swivel Earpiece – RLN6423
• Lightweight Headset with Boom Microphone – 53815
• Earpiece with Inline Push-to-Talk Microphone – 56517
• Earpiece with Boom Microphone – 56518
• Rechargeable Lithium Ion Battery – 56557
• Alkaline Battery Tray – 1564200W18
• Multi-unit Charger – 56531
CLS 1460 Additional Features
• Four channel operation / 121 Interference Eliminator Codes (38
analog, 83 digital)
• Channel scan feature to monitor frequencies and codes for activity
• VibraCall Alert
CLS 1110 / 1460 Talk Time Features:
• Battery Life - Up to 12 hours
What’s Included:
• One CLS Series Professional Two-Way radio
• Rechargeable Lithium Ion Battery
• 3-hr Drop-in Desktop Battery Charger
• Swivel Carry Holster
• User Manual
• Quick Reference Guide
• One Year Limited Warranty
RDU4100 Additional Features
• Range up to 350,000 sq. ft. or 30
floors indoors
• 4-watts of power
• 10 pre-programmed channels to
communicate with separate work
groups
• Custom programmable to match other
business band radios
RDU4160d Additional Features
• Range up to 350,000 sq. ft. or 30
floors indoors
• 4-watts of power
• 16 pre-programmed channels to
communicate with separate work
groups
• Custom programmable to match other
business band radios
• Repeater capability
• Front panel programming buttons with Manager lock
RDX Series Talk Time Features:
• Li-ion Rechargeable Battery Life - Up to 12 hours per charge
with standard battery and up to 26 hours with higher capacity
batteries. AA Battery Life - Up to 26 hours
What’s Included:
• RDX Series two-way radio RDU2020
• 1100 mAh Li-ion Rechargeable Battery
• 10-Hour Plug-In Charger
• Spring loaded belt clip
• Antenna
• User’s Guide
• Accessory Brochure
• Warranty Card
RDU4100 RDU4160d
RDX Series Accessories:
• Remote speaker microphone – 53862
• Temple Transducer Headset with In-line Push-to-Talk (PTT)
Microphone – RMN5114
• Radio to Radio Cloning Cable – RLN6303
• CPS USB Programming Cable – RKN4155
• Ultra High Capacity Lithium-Ion Battery – RLN6308
• Multi-Unit Charger – RLN6309
584 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TWO-WAY RADIOS
DTR410 DIGITAL Business Two-Way
Radio
The digital advantage offers unique one-to-one calling capability
or group communication..
DTR410 Features
• 900 MHz ISM license-free band
• Digital one-to many group call
• Frequency hopping spread spectrum (FHSS)
• Public-group calling - up to 5 public groups
• Battery gauge
• Lithium ion battery - up to 14.5 hours of operation
• 3-hours desktop charger included
• Public group call name aliasing (via optional Mini Keyboard)
• Rugged, compact polycarbonate housing with rubber overmold
for comfort - 5.27”H x 2.3 “W x 1.4”D
• Meets military 810 C, D, E, and F specifications for shock,
vibration, water, dust and temperature extremes
• 2-pin audio accessory jack with captive connector cover
• Connector programming interface with captive connector cover
• Full-graphic backlit display, contrast adjustment and backlight timer
• Daily alarm
• Caller ID
• Recent call list - last 20 transmissions
• Up to 5 group contact list
• Unit-to-unit configuration cloning (via optional Cloning cable)
• Coverage of up to 300,000 sq. ft. or 25 floors
• * Default Programming - 5 Public Groups
• * Weight with Li-lon Battery - 7.1 oz
• * Average Battery Life - 14.5 hrs
DTR410 Accessories:
• Earpiece with microphone – 53863
• Lightweight Headset with Boom Microphone – 53815
• Earbud with Clip Microphone and Push-to-Talk – 56517
• Headset with Swivel Boom Microphone – 53865
• Swivel Earpiece – RLN6423A
• Earpiece with In-Line Push-to-Talk (PTT) Microphone - 56517
• DTR Series Holster - 53961
• Mini-Keyboard - 53967
• 1 Hr. Rapid Charger - 53969
• 3 hr. Standard Charger - NNTN4641A
• Cloning Cable - 53968
• Rechargeable Lithium Ion Battery – 53963
• Replacement Drop-In charging Tray – 53962
• Multi-unit Charger – 53960
585
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CARR LANE STORAGE BINS
Hold It. . . Lift It . . . Join It . . . Pin It . . .
• Tooling Components
• Clamping Devices
• Alignment Pins
• Handles & Knobs
• Toggle Clamps
Tooling was never so easy!
Get the parts you need,
They're all available at NEFCO!
• Chuck Jaws
• Drill Jig Bushings
• Modular Fixtures
• Swivel Hoist Rings
Parts Storage Systems
Compartment Boxes
Manufactured of prime cold rolled steel and finished in rust and acid resistant
baked enamel. High impact plastic inserts. Inserts have rounded scoops, making it
easy to remove small parts. Covers are designed to stay open making it easy to
access parts and read cover labels.
Boxes have handles with pull-down catches.
Other Durham Products
Here are some other products available from Durham
Call NEFCO today for your free copy of the
Durham catalog
Racks for Compartment Boxes
These racks will accept Durham Compartment Boxes.
Part No. No. of Compartments Width Height Depth
DUR 115 12 18 3 12
DUR 113 16 18 3 12
DUR 102 24 18 3 12
Part No. No. of Drawers Width Height Depth
DUR 302 2 20 8-1/8 15-3/4
DUR 303 4 20 15 15-3/4
DUR 304 Base only 20-3/8 15-1/8 16
Part No. No. of Drawers
DUR 014 30
Part No. Description
DUR 359 40 Hole
DUR 363 72 Hole
586 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
VICES
Also available in stainless steel
F-Series Vises
The F-Series Vises are constructed of 75,000 PSI tensile strength forged steel.
These sleek, rugged vises out perform their bulky cast-iron competition.
Ridgid F-Series Vises feature a patented parallel jaw
alignment system. This exclusive feature gives the F-Series
safe, precise clamping action as well as longer service life.
F-Series also features:
• All steel, drop forged
construction
• Rolled double lead acme
screw
• Steel handle with rubber
anti-pinch rings
• Increased work areas
• Standard fixed pipe jaws
• Large, hardened anvil
• Surface hardened slides foe
smooth, precise operation
• Forged steel swivel base with dual draw down bolts
• Ridgid Lifetime Warranty
Part Model Weight
No. No. Description lb Kg
66987 F-45 4-1/2" Forged Vise 26 11.9
66992 F-50 5" Forged Vise 48 21.6
66997 F-60 6" Forged Vise 63 28.6
69892 F-45-S 4/2" Stationery 22 10.0
69897 F-50-S 5" Stationery 39 17.7
69902 F-60-S 6" Stationery 55 25.0
69907 - Swivel base assembly 3 1.4
for F-45
69912 - Swivel base assembly 5 2.8
for F-50 & F-60
Tool Group
Mechanics' Vises
Wilton's
Mechanics'
Vises are the
best buy for
professional
mechanics!
Part UPC Jaw Jaw Throat Pipe Jaw Shipping
No. No. Width Opening Depth Cap. lb ea.
744 21300 4 4-1/2 4-1/16 1/4 - 2 37
745 21400 5 5-1/4 3-3/4 1/4 - 2-1/2 50
746 21500 6 5-3/4 4-1/8 1/4 - 3-1/2 63
Replacement Parts
Steel Top Jaws Steel Pipe Jaws
2904040 2904200
2904110 2904200
2904080 2904200
Nominal Nominal
Part Throat Nominal Clamping Approx.
No. Depth Opening Pressure Weight
Standard handle
LC-4 2-3/8 4 400 1.10
LC-6 3-1/8 6 500 1.30
LC-8 4 8 770 2.40
LC-10 4-3/4 10 880 3.30
LC-12 5-1/2 12 1110 5.10
LC-20 5 20 1440 5.30
Offset handle - for more leverage
1800L-12 5-1/2 12 1800 7.00
J-Series lever clamp - with offset handle
JLC24-12 5-1/2 12 1800 9.00
Rapid Action Lever Clamp — A and B
587
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
WILTON CLAMPS
100 Series
Drop Forged - Heavy Duty
Recommended for heavy industrial and construction job
site demands, the heavy duty models are some of the
toughest products available for their weight strength ratio.
Min. Shipping
Part UPC Throat Spindle Proof Weight
No. No. Capacity Depth Dia. Test lb lb
102 14114 0 - 2 1-1/2 9/16 7500 1-3/4
103 14128 0 - 3 2 5/8 8750 3
104 14142 0 - 4 2-3/8 3/4 10000 4-3/4
106 14156 2 - 6 2-1/2 3/4 11250 6-5/8
108 14170 4 - 8 2-5/8 3/4 12500 7-1/2
110 14184 6 - 10 2-3/4 3/4 13750 9-3/4
112 14198 8 - 12 2-7/8 3/4 15000 11-7/8
400 Series
Drop Forged, Regular Duty, Extra
Deep Throat
Hi-Tech frames - stronger
and deeper throat depth.
Min. Shipping
Part UPC Throat Spindle Proof Weight
No. No. Capacity Depth Dia. Test lb lb
402 14214 0 - 2-1/8 2-1/4 9/16 3500 1-5/8
403 14228 0 - 3 2-1/2 9/16 3500 2-1/4
404 14242 0 - 4-1/2 3-1/4 3/4 6200 3-3/4
406 14256 0 - 6-1/16 4-1/8 3/4 6900 5-1/2
408 14270 0 - 8-1/4 5 3/4 6600 6-7/8
410 14284 2 - 10-1/8 6 3/4 8000 10-1/4
412 14298 2 - 12-1/4 6-5/16 7/8 9300 14-3/8
"0" Series
Extra Heavy Duty Spring Clamps
The extra heavy duty
models are designed to
stand up to the demands
of heavy industrial
applications like those
encountered in ship
building. With minimum
proof test lb, ranging up
to 40,000 lb; machined,
square spindle heads
stand up to heavy wrench
tightening use.
Min. Shipping
Part UPC Throat Spindle Proof Weight
No. No. Capacity Depth Dia. Test lb lb
0 F.C. 14509 0 - 3/4 3/4 3/8 2800 1/2
1 F.C. 14518 0 - 1-7/16 1-1/8 7/16 5600 1
1-1/2 F.C. 14527 0 -1-7/8 1-5/8 5/8 8750 2
2 F.C. 14536 0 - 2-3/8 1-3/4 3/4 12500 4-1/4
3 F.C.. 14545 0 - 3-3/8 2-3/8 7/8 16250 7-1/4
5 F.C.. 14563 0 - 5-1/2 3-1/8 7/8 23800 13-5/8
6 F.C. 14572 0 - 6-1/2 3-3/8 1-1/8 27500 18-1/2
8 F.C. 14581 0 - 8-1/2 4-1/8 1-1/8 31250 26-1/2
10 F.C. 14590 0 - 10-1/2 4-1/8 1-1/8 35000 33-1/4
12 F.C. 14599 0 - 12-1/4 4-1/4 1-1/8 40000 42-3/4
Springs Clamps make it the tool of
a "thousand-and-one" uses.
Part UPC Max. Jaw Overall
No. No. Description Opening Length
634 14900 4" Spring Clamp with 1 4
Protective Handles & Tips
636 14901 6" Spring Clamp with 2 6
Protective Handles & Tips
639 14903 9" Spring Clamp with 3 3
Protective Handles & Tips
635 14904 6" Spring Clamp with 1 4
Protective Handles & Tips
637 14905 6" Spring Clamp with 2 6
Protective Handles & Tips
639 14906 9" Spring Clamp with 3 9
Protective Handles & Tips
"C" Clamps
588 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BESSEY CLAMPS
SQ Series "Super Quick" Clamps
• Deep throat has greater reach... eliminates the need for regular and deep throat C-Clamp
• Manufactured to Bessey's high quality standards... with an economical standard pad.
Nominal Nominal Nominal
Part Throat Nominal Rail Clamping Approx.
No. Depth Opening Size Pressure Weight
SQ-4 4-3/4 6 27/32 x 13/32 1300 2.50
SQ-8 4-3/4 8 1-3/16 x 9/16 2660 5.50
SQ-10 4-3/4 10 1-3/16 x 9/16 2660 6.00
SQ-12 5-1/2 12 1-3/16 x 9/16 2660 7.30
SQ-20 4-3/4 20 1-3/16 x 9/16 2660 8.50
SQ
"Step-Over" J-Series Clamps
All the great features of the legendary Bessey Sliding arm clamps as listed above
... Plus a feature that adds a ton of flexibility to clamping. The return rail lets
the J-clamps "step-over" the lip on channel iron, angle-iron, I-beam or other
obstructions.
Nominal Nominal Nominal
Part Throat Nominal Rail Rail Clamping Approx.
No. Depth Opening Return Size Pressure Weight
J24-12 5-1/2 12 4 1-3/16 x 9/16 2660 8.0
J48-20 5-1/2 20 4 1-9/16 x 3/4 4880 18.0
JLC24-12 5-1/2 12 4-1/2 1-13/16 x 9/16 1800 9.0
Black Copper Nominal Nominal
Oxide Coated Nominal Throat Clamping Screw Approx.
Spindle Spindle Opening Depth Pressure Diameter Weight
JM402 JM402C 2 2 3300 5/8 1.50
JM403 JM403C 3 2-3/8 3500 5/8 1.75
JM404 JM404C 4 2-3/4 4100 3/4 2.75
JM406 JM406C 6 3-5/8 5400 3/4 4.75
JM408 JM408C 8 4-1/2 5900 3/4 8.50
JM410 JM410C 10 5-3/8 6200 3/4 10.25
JM412 JM412C 12 5-3/4 9500 3/4 13.75
James Morton® Drop-Forged C-Clamps
• Drop-forged heat-treated steel frame
• Swivel pad
• Your choice of spindle and pads: black oxide coated to resist corrosion or
copper coated to resist weld spatter
589
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
BESSEY CLAMPS
Heat Treated Steel, Sliding Arm Clamps
Nominal Nominal Nominal Nominal
Part No. Opening Throat Depth Clamping Pressure Rail Size Approx. Weight
2400 Series Regular Duty Clamps - with Morpad
2400S-6 6 5-1/2 2660 1-3/16 x 9/16 5.00
2400S-8 8 5-1/2 2660 1-3/16 x 9/16 5.50
2400S-10 10 5-1/2 2660 1-3/16 x 9/16 5.75
2400S-12 12 5-1/2 2660 1-3/16 x 9/16 6.80
2400S-20 20 5-1/2 2660 1-3/16 x 9/16 7.50
2400S-40 40 5-1/2 2660 1-3/16 x 9/16 10.75
2400S-60 60 5-1/2 2660 1-3/16 x 9/16 14.25
4800 Series Heavy Duty Clamps - with Morpad
4800S-12 12 7 4880 1-9/16 x 3/4 12.00
4800S-20 20 7 4880 1-9/16 x 3/4 14.50
4800S-40 40 7 4880 1-9/16 x 3/4 20.00
4800S-48 48 7 4880 1-9/16 x 3/4 22.00
4800S-60 60 7 4880 1-9/16 x 3/4 28.00
7200 Series Extra Heavy Duty Clamps - with Morpad
7200S-12 12 8 7770 1-15/16 x 1 24.00
7200S-20 20 8 7770 1-15/16 x 1 28.00
7200S-40 40 8 7770 1-15/16 x 1 38.00
2400 Series
Regular Duty Clamps
• Seven sizes - from 6" to 60" openings
• 2660 lb nominal clamping pressure
4800 Series
Heavy Duty Clamps
• For uses such as clamping 3/4" plate
• Five sizes - from 12" to 60" openings
• 4880 lb nominal clamping pressure
7200 Series
Extra Heavy Duty Clamps
• For uses such as clamping 1" plate
• Safety wedge provides additonal locking
pressure on sliding arm
• Three sizes – from 12" to 40" openings
• 7770 lb nomimal clamping pressure
These clamps offer a greater reach to eliminate the need to buy both regular and deep throat clamps.
Bessey Heat Treated Steel, Sliding Arm Clamps feature the patented Morpad - the replaceable pad that tilts to 35°.
NEFCO IS YOUR ONE-STOP FOR ALL YOUR STRUT REQUIREMENTS
Stainless Steel In STOCK
Stainless Steel 304 & 316 Strut
Stainless Steel Hardware
Stainless Steel Bolts, Couplings and
Washers
Clips, Anchors and Straps
Fiberglass Strut In STOCK
Fiberglass Strut
Fiberglass Clamps
Fiberglass Hardware
590 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PRODUCTS FOR ROOFING
Milwaukee
Tilt-Lok Circular Saw Kit
7-1/4" circular saw with 8-position
Tilt-Lok handle, carbide blade, hex
blade wrench and impact resistant
carrying case. Features 15.0 Amp, 3
1/4 maximum horsepower motor
Part No. 6390-21
Milwaukee
SDS Plus Carbide Masonry Bits
2- Cutter Bits
Small sampling of bits available. Please see our Tool Section for
complete listing of bits available.
Part No. Size (in.) Dia. x U.L x O.L.
48-20-7421 7/32 x 4 x 6
48-20-7422 7/32 x 6 x 8
48-20-7424 7/32 x 9 x 11
48-20-7530 1/4 x 2 x 4-1/2
48-20-7531 1/4 x 4 x 6
48-20-7532 1/4 x 6 x 8
Milwaukee
Sawzall Reciprocating Saw Blades
Fits all Sawzalls and standard competitive saws. Wood and Metal
cutting. Please see our Tool Section for a complete listing of sizes
and Manufacturers, including Lenox, available
Part No. TPI Length
Wood Cutting
48-01-6031 5/8 6"
48-01-6036 6 9"
48-01-6037 6 12"
Metal Cutting
48-01-6182 14 6"
48-01-6187 14 9"
48-01-6189 6 12"
Dewalt
6.2 Amp VSR Screwdriver
Versa-Clutch® system to "dial' the
proper torque needed to drive fas-
teners without stripping or breaking
fastener.
Rubber grip and two-finger, rubber
trigger for increased comfort
Max. Fastener Size: #14
Part No.
DW257
Milwaukee TEK Screwdriver
0-2500 RPM Steel Building and
HVAC Screwdriver drives screws
joining multiple sheets of 24 to 10
gauge steel. When the screw head
reaches the selected torque the
adjustable clutch slips with minimum
reaction force.
Part No.
6780-20
\
Magnetic Nutsetters
1/4" hex drive. Long Shank
Part No. Hex Size O.A.L.
MSHL1/4 1/4" 2-9/16"
MSHL5/6 5/16" 2-9/16"
MSHL3/8 3/8" 2-9/16"
Phillips Power Bits
1/4" hex shank power bits. Phillips tip.
Part No. Point Size O.A.L. (in.)
321P #1 2-34"
302P #2 1-15/16"
322P #2 2-3/4"
342P #2 3-1/2"
303P #3 1-15/16"
343P #3 3-1/2"
Milwaukee
11 Amp
Reciprocating Saw
3/4" Stroke, 0-2800 spm.
Adjustable pivot shoe
Accepts standard 1/2 in. shank sawzall blades
Includes 2 blades, & case
Part No.
6509-22
Bosch Tools
7/8" D-Handle Rotary
Hammer
Vario-lock positioning rotates and
locks chisel into 36 different posi-
tions to optimize work angle.
Three operational modes for versa-
tility: Hammer only, Rotation only, Hammer & Rotation.
Includes 5 bits, 360° Auxiliary handle, Depth gauge, Plastic case
Part No.
11224VSR
591
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PRODUCTS FOR ROOFING
Newborn
Professional Caulking Gun
Hex Rod - Parallel Frame
10:1 Thrust Ratio
E-Z Thrust
E-Z Load Front Cap
Ladder Hook
Includes Patented "Caulk Buddy" Finishing Tool w/Caps.
Part No.
111
Voltec Industries
3-Way Power Block Adapters
with GFCI
3-Conductor ST W-A 3-Outlet Power Block 300V
Plug Three Power Tools or Appliances into One
Outlet
GFCIs meet or exceed all UL, cUL and OSHA
requirements
Part No. Length AWG Max
Amps
Max
Watts GFCI
04-00105 3' 12/3 15 1875 YES
04-00090 2' 12/3 15 1875 NO
Voltec Industries
Outdoor Extension Cords
All Purpose Cords
Year-round, all-weather extra flexible cord.
Meets UL and OSHA standards for outdoor
cords.
Lighted ends indicate power status.
Cold Weather Extension Cords
Remain flexible under extreme hot or cold
weather conditions.
Resists the negative effects of oil, water, weather, abrasion, and
ozone.
Part No. Length AWG Max
Amps
Max
Watts
All-Purpose 14/3 ga. 3-Conductor SJT W-A Grounding 300 V
05-00341 25' 14/3 15 1875
05-00342 50' 14/3 15 1875
05-00343 100' 14/3 13 1625
All-Purpose 12/3 ga. 3-Conductor SJT W-A Grounding 300V
05-00347 25' 12/3 15 1875
05-00348 50' 12/3 15 1875
05-00349 100' 12/3 15 1875
Cold Weather 12/3 ga. 3-Conductor SJEOO W-A Grounding 300V
05-00141 25' 12/3 15 1875
05-00142 50' 12/3 15 1875
05-00143 100' 12/3 15 1875
Chip Brushes
Forawiderangeofprojects.Economywhite
bristle.
Part # Size Thickness Trim
89701 4" 3/8" 1-3/4"
89702 4" 11/16" 2-1/2"
Powers Fasteners Zamac Nailin® Anchors
Mushroom Head
A tamper-proof nail drive anchor. Body formed from Zamac alloy,
nails are carbon steel. May be used in concrete, brick or stone. Not
recommended for overhead applications. Size range 3/16” x 7/8” to
1/4” x 2”. Drill diameter same as nail diameter. Packaged 100/box.
Part No. Size
2802 3/16” x 7/8”
2806 1/4” x 3/4”
2808 1/4” x 1”
2814 1/4” x 1-1/4”
Part No. Size
2820 1/4” x 1-1/2”
2826 1/4” x 2”
2804 1/4” x 3”
Paint Roller Frames &
Covers
Specifications: Heavy-duty 9"
Roller Frame: 5/16" dia. metal
frame, 2 plastic caps, a 5-wire
cage and a solid plastic handle
with a threaded grip. 9" Paint
Roller Covers: 100% synthetic fi-
ber (3/8” nap), 3-ply phenolic core
backing works well with all paints.
4" Roller Frame: 1/4" dia. metal
frame, 23" L. 4" Polyester Covers
work well for latex paints and is
especially suited for wall and floor
edging and line painting.
Part No. Description
Paint Roller Frames
99076890 Heavy Duty 9” Paint Roller Frame
99748540 4” Paint Roller Frame
Roller Covers
9TU038 9” Roller Cover 3/8” nap
9SC038 9” Heavy Duty Roller Cover 3/8” Nap
4SC038 4” Heavy Duty Roller Cover 3/8” Nap
592 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
PRODUCTS FOR ROOFING
Stanley Industrial Tools
Razor Blades
Single edge utility knife razor
blades.
Part No. Pkg.
11-921 5/pack
11-921T 10/pack
11921A 100/pack
Stanley Industrial Tools
Utility Knife Hook Blade
Designed to cut linoleum,
roofing material, cartons, etc.
without damage
Two hooked ends cut to full
thickness on one stroke
Part No. Pkg.
11-961 5/pk
Champion Cutting Tool Corp.
Cobalt Jobber Drills
Straight Shank, 135° Split Point,
Gold Oxide Finish, M4-2 Cobalt
HSS. Please see our Tool Section
for complete listing of sizes and
other drill bits
Part No. Size Flute Length Overall Length
705C-3/16 3/16" 2-5/16" 3-1/2"
705C-1/4 1/4" 2-3/4" 4"
705C-5/16 5/16" 3-3/16" 4-1/2"
705C-3/8 3/8" 3-5/8" 5"
Champion Cutting Tool Corp.
T-Handle Tap Wrench
Part No. Size Range
CCT3002-1 1 1/16" - 1/4"
CCT3002-2 2 7/32" - 1/2"
Champion Cutting Tool Corp.
Carbon Steel Bottoming Hand Taps
Bottoming taps have only 1 to 1 1/2 threads of chamfer and used
to tap the bottom of a blind hole.
Please see our Tool Section for a complete listing of taps and dies.
Part No. # of Flutes Thread Length O.A.L
302-5/16-18B 4 1-1/8" 2-23/32"
302-3/8-16B 4 1-1/4" 2-15/16"
Poly Tarps
Commercial Grade blue poly
tarps with woven reinforcement
• Grommeted
• Weatherproof/Water repellent
• Mildew-proof
• Flexible
• Washable
• Lightweight
Heavy Duty
Contractor’s Trash Bags
42 Gallon (7 Bushel) Black Trash
Bags. 3 Mil Strength. 20 per box.
Part No. Description
19020 Trash Bags
Part No. Size
TARP8X10BLUE 8'x10'
TARP10X12BLUE 10'x12'
TARP16X20BLUE 16'x20'
TARP20X20BLUE 20'x20'
TARP20X30BLUE 20'x30'
TARP30X40BLUE 30'x40'
TARP40X40BLUE 40'x40'
TARP40X60BLUE 40'x60'
Polyethylene Sheeting
Fire retardant and woven
polyester mesh reinforced styles
available.
Part No. Size Mil
C-410 10’ x 100’ 4
C-420 20’ x 100’ 4
Part No. Size Mil
C-610 10’ x 100’ 6
C-620 20’ x 100’ 6
Duct Tape
Two Grades:
General
Purpose and
Contractor’s
Grade
Contractor’s Grade is 11 mil
General Purpose Grade is 8 mil
Waterproof
Silver
2” x 60 yards
Part No. Grade
83689 Utility
4137 Contractor's
Aluminum Foil Tape
2 mil Aluminum Foil
Acrylic Adhesive w/ easy re-
lease liner
UL and HUD approved
Part No.
UNT412
593
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Krylon® Industrial Paints
Inverted Marking Paint
Industrial Quik-Mark™
Both APWA and fluorescent colors
are available in water and solvent-
based formulations.
Use on concrete, pavement, gravel,
grass, brick, asphalt, athletic fields,
utility, excavation, ground, survey-
ing and construction marking.
Water-Based Marking Paints
Inverted Marking Paint Industrial Quik-Mark™
• Ideal for marking the most common indoor and outdoor surfaces
• Fast-drying, high-solids formula penetrates, adheres to hot surfaces
• VOC compliant and lead-free
• Pack: 12
Part No. Color Size
(oz. net wt.)
Water Based Marking Paints
S03500 Clear 17
S03401 Brilliant White 12
S03402 Brilliant Yellow 12
S03403 Brilliant Orange 12
S03404 Brilliant Red 12
S03406 Brilliant Blue 12
S03407 Brilliant Green 12
S03801 Utility Yellow 12
Fluorescent, Water Based
S03801 Utility Yellow 17
S03610 Red 17
S03612 Pink 17
S03620 Caution Blue 17
S03630 Safety Green 17
S03410 Red/Orange 12
S03405 Pink 12
S03408 Orange 12
S03409 Red 12
PRODUCTS FOR ROOFING
Cloth Rags and
Wipers
Inexpensive all-around,
all-purpose cleaning. Avail-
able in a variety of sizes
and materials. Standard
size: 50 lbs. Call for your
specific sizing needs.
Part No. Description Weight
CPW400 Mixed Rags (#1 Lightweight) 50 lb.
CPW100 Cotton Polo (Colored) 50 lb.
CPW300 Fleece 50 lb.
CPW160 White Flannel 50 lb.
CPW200 Colored Flannel 50 lb.
CPW850 White T-Shirt 50 lb.
CPW150 New White Knit 50 lb.
CPW325 Cheese cloth 50 lb.
CPW500 White Sheeting 50 lb.
CPW090 New Bar Towels 50 lb.
CPW700 Corduroy 50 lb.
Erin Rope
Natural Fiber Manila Rope
3-strand natural fiber manila rope.
The strongest of all natural fiber ropes.
Part No. Size
TWM081200 1/4” x 1200’
Ames/True Temper
J-100 Series
Long Handle Industrial Shovels
Blades with onion skin finish for better release
Rolled back step
48" tapered, lacquered ash handle
Blade Dimensions: 9 1/2"x12"
Part No. Desc
BMTLR Round Point
BMTLS Square Point
Ames/True Temper
30" Poly Leaf Rake
For large capacity leaf raking and general purpose
clean up
30 Reinforced poly tines
48" Threaded hardwood handle
Part No. Description
64169 30" Poly Leaf Rake
Ames/True Temper
Poly Snow Shovel
For lifting and throwing light accumulations of snow
18" x 13-1/2" Ribbed poly blade for greater durability
36" Vinyl-coated steel handle with snow poly D-grip
(Specifications subject to change)
Part No. Description
1627200 Poly Snow Shovel
Ames/True Temper
16 in. Bow Rake
Wooden handle bow rake, steel head, closed ferrule
with wooden handle.
Head: 16-3/4"
Teeth: 16
Handle: 60"
Part No.
1886300
594 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
Tyvek® Coveralls
Ideal for applications when dry particulates are haz-
ardous, including spray-painting, agriculture and lead
remediation. Provides durable protection while re-
maining comfortable to workers. Sizes Large through
3X-Large. Packaged/Sold 25 per case.
Part No.
TY120S
PRODUCTS FOR ROOFING
Advance Brush Floor Brooms
A wide selection of quality surface sweeping brooms. Filaments
range from soft horsehair to stiff Palmyra and steel wire for a
variety of sweeping needs. Use with threaded handle.
Part
No. Sweep Width Fill Material Trim
Length
Block
Type
89230
Fine
18” Silver
flagged-
tipped
plastic
3” Foam
Plastic
89231 24” 3”
89224 30” 3”
Lacquered
Hardwood
89249
Med
18”
Black
Tampico
2-5/8”
89252 24” 2-5/8”
89255 30" 2-5/8"
89889 60" Wood Handle w/ threaded metal tip
Barrier Fence
High Visibility
Lightweight, economical, durable
and highly visible.
OSHA Orange for high visibility
UV Stable for long life
High strength polypropylene mesh
4’ x 100’ rolls
Part No. Desc
BFW4100GR Barrier Fence, 4’ x 100’
Master Lock Co.
Laminated Steel Padlock
4-Pin Cylinder
1-3/4" wide laminated body
3/4" horizontal shackle clearance
Shackle is 5/16" diameter
Keyed alike padlocks are sold in
multiples of 6
Part No. Shackle Clearance Keyed
1LJ 15/16” Different
1KA 15/16” Alike
Galvanized Coil
Roofing Nails
Galvanized, 1-1/4” Long,
7200 per box
Part No.
GRCR3DGAL
Jackson Safety
Perimeter Safety Flags (Pennants)
• Made of low density UV polyethylene for
long lasting use
• Tensile strength of 107 lbs for extra durability
Part No. Description
3006635 Yellow, 100 ft.
PVC Coated Work Gloves
Knit Wrist
Single dip economy PVC
coated. Smooth finish. Interlock
lining, knit wrist. Size: Large
Part No.
1700
Jackson Safety
Dust/Nuisance Mask
This dust mask provides eco-
nomical protection and relief
from common nuisance dusts.
Do not use when dust concen-
trations exceed OSHA PEL. Not
rated. 50/box. 20 box/case
Part No.
3005846
Be sure to visit
www.GoNefco.com
Online Catalog • Submittals
New Products • and More!
595
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PRODUCTS FOR ROOFING
Safewaze
Safelight® Full Body Harness
• Lightweight, universal sized harness
• Single back D-ring
• Mating chest and friction buckle leg
connections
• 10911 includes 2 waist D-rings for
positioning
• 310 lb. rated, exceeds OSHA 1926,
ANSI z359.1 Standards
Part No. D Rings
10910 Back
10911 Back, Waist
Safewaze
Safelight™ Shock Absorbing Lanyard
• 1” web with external shock pack
• 6 foot length
• 2 Snap Hooks
• Maximum Arrest Distance - 42" < 900 lbs.
• 310 lb. rated, exceeds OSHA 1926, ANSI z359.1 and
CSA z259.1
Part No.
209512
Safewaze
Lifeline Assemblies
• 5/8” Low-elasticity SafeCom
poly/dacron blended rope
• Standard sizes from 25’ to 100’
• Longer assemblies and bulk rope
available
• Iinclude 2 steel snap hooks
• Rope grab available separately
Part No. Length
0221-25 25’
0221-30 30’
0221-50 50’
0221-100 100’
Safewaze
Rope Grab
• Stainless Steel,
• Self-Trailing, fits 5/8" Rope
• **Requires Anchorage Connec-
tor to Attach Rope to Anchor in
Most Cases
• Exceeds OSHA 1926, ANSI
z359.1-2007 Standards
Part No.
0117
MSA V-Gard® Protective Caps
Features advanced styling and meets
ANSI Z89.1, 2003 Type I, Class G,
E, and C Standards
Fas-Trac® Ratchet Suspension
• Large knob for easy adjustment
• Comfortable, four-point webbed
suspension
• Adjustable dual nylon crown straps
• Perforated vinyl sweatband wipes clean easily
Part No. Color
Fas-Trac Ratchet Suspension
475360 Yellow
Other Colors: White, Blue, Orange, Red, Gray,
Green, Hi-Viz Orange, Hi-Viz Green.
Eagle Manufacturing Co.
Safety Cans
Type I & Type II
• Type II cans have flame arrestors
in both fill and pour spouts and a
flexible metal pour spout.
• Funnel attachment (F-15) for Type
I cans, for easy, accurate dispens-
ing. Funnel comes standard with
model UI-50-FS (5 gallon).
Jackson Safety
Econo Style ESK Safety Vests
• One Size Fits Most
• Elastic Sides for easy fit
• Mesh Fabric
• Hook and look closure
Part No. Color
Non-Reflective
3017585 Orange
3017586 Lime
Reflective
3017587 Orange, 1/2”
Silver Beaded
Pac-Kit
#25 First Aid Kit
Weatherproof Plastic
Case
Contents exceed require-
ments of ANSI Standard
z308.1-2003
Neat, orderly interior
packaging, makes contents
easy to locate and use!
Contains Eyewash & Dressings
Part No.
NEFPAC6430
Part No. Capacity Hose
OD x L
Type I - 24 ga. Galvanized Steel
UI-20-FSRED 2 gal. — Gasoline
UI-50-FSRED 5 incl. funnel Gasoline
UI-50-FSYELLOW 5 incl. funnel Diesel
UI-50-FSBLUE 5 incl. funnel Kerosene
Type II - 24 ga. Galvanized Steel
U2-26-S 2 1" x 12" Gasoline
U2-51-S 5 1" x 12" Gasoline
U2-51-SX5 5 5/8" x 12" Gasoline
596 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
BAND SAW BLADE SELECTION GUIDE
Selecting Carbide Tipped Bandsaw Blades
The following information needs to be specified when a band saw blade is ordered:
Product Name Length x Width x Thickness Teeth Per Inch
For Example: ARMOR® CT BLACK 16" x 1-1/4" x .042" 2.5/3.4 TPI
Step #1: Analyze the sawing application
Machine: Determine the band size for the machine
(Length x Width x Thickness).
Material: Find out the following for the material to be cut:
• Material Type/Grade
• Size
• Shape
Operation: Is this a production or general purpose sawing operation?
Step #2: Determine HIGH PERFORMANCE VS. SPECIAL APPLICATION
Use the charts below.
• Locate the type of material to be cut in the top row.
• Read down the chart to find which blade is recommended.
Step #3: Determine the proper number of teeth per inch (TPI )
If having difficulty choosing between two pitches, the coarser of the two will generally give better performance.
When compromise is necessary, choose the correct TPI first. A general rule for bundles: Determine the correct TPI for the largest con-
tinuous cross section.
Step #4: Confirm the Desired Product is Available
• Go to the product page for the product you have selected.
• Confirm that product is available in the correct blade width and TPI.
* = Matrix
edge
+ = Extra
heavy set
available to
prevent blade
pinching
Rx®+ Bi-Metal Band Saw Blade
Engineered to Cut Structurals, Tubing and Bundles
Long Blade Life and Extreme Durability
Patented tooth profile resists tooth strippage, even at higher feed rates
Quiet Cutting, Reduced Vibration
Optimized tooth pitch/set sequence
Width x Thickness TPI
In. mm. 2/3 3/4 4/6 5/8 10/14
5/8 x .032 16 x 0.80 *
3/4 x .035 19 x 0.90 w w
1 x .035 27 x 0.90 w w w w
1-1/4 x .042 34 x 1.07 w+ w+ w+ w
1-1/2 x .050 41 x 1.27 w+ w+ w+ w
2 x .050 54 x 1.27 w+ w+ w+ w
2 x .063 54 x 1.60 w+ w+ w
2-5/8 x .063 67 x 1.60 w+ w+ w
APPLICATION
Carbon Steels
Structural Steels
Friction Band
Friction Cutting Operations
Fast cutting
Special set design for increased frictional heat
Long lasting
Special silicon carbon steel provides extended fatigue life
Note: Operates at band speeds up to 20,000 fpm.
APPLICATION
Ferrous Metals
Tooth Form Standard
Set Pattern Lenox® Set
Width x Thickness TPI
In. mm. 10
1 x .035 25.4 x 0.90 w
597
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CARBON BAND SAW BLADES
#32 Wood Carbon Bandsaw Blade
Specialized Woodworking Applications
Straighter, easier cutting
Manufactured with a heavier gauge (.032")
flexible carbon steel material
Designed for contour cutting of wood
Perfect for furniture manufacturing operations
Note: Not recommended for blades shorter than 15' long. If
shorter blade is required, Lenox® Flex Back is recommended
APPLICATION
Wood
Tooth Form Hook
Set Pattern Raker Set Alternate
Width x Thickness TPI TPI
In. mm. 2 3 4 2 3 4
1/4 x .032 6.4 x 0.80 w w
3/8 x .032 9.5 x 0.80 w w w w w
1/2 x .032 12.7 x 0.80 w w w w
Classic®
The Ultimate Multi-Purpose Blade
Long Life In General Purpose Cutting Applications
Patented Tuff ToothTM design reduces tooth strippage
M-42 high speed steel edge for excellent heat and wear
resistance
APPLICATION
Aluminun / Alloy Steels
Non FerrousStainless Steels
Carbon Steels Tool Steels
Structural Steels
Tooth Form
Width x Thickness
TUFF TOOTHTM
TPI
VARI-TOOTH®
TPI
WAVY
TPI
HOOK
TPI
In. mm. 2/3 3/4 4/6 6/8 5/8 6/10 8/12 10/14 14 18 3
3/4 x .035 19 x 0.90 w w w w w w w w w
1 x .035 27 x 0.90 w w w w w w w w w
1-1/4 x .042 34 x 1.07 w w w w w w w
1-1/2 x .050 41 x 1.27 w w+w w
2 x .050 54 x 1.27 w w w
2 x .063 54 x 1.60 w+w+w
+ = Extra heavy set available to prevent blade pinching
Diemaster 2®
Engineered for Contour Cutting
Faster Cutting with M-42 High Speed Steel Tooth Edge
Runs at twice the speed of carbon blades for faster, easier cutting
Longer Blade Life
Lasts 10 times longer than carbon blades
For General Purpose Hand-Fed Applications
Tool and die shops, machine shops, maintenance facilities
APPLICATION
Aluminun / Alloy Steels
Non Ferrous Stainless Steels
Carbon Steels Tool Steels
Structural Steels Wood
Tooth Form
Width x Thickness
VARI-TOOTH®
TPI
Standard
TPI
Hook
TPI
In. mm. 6/10 8/12 10/14 14/18 10 14 18 24 3 4 6
1/4 x .025 6.4 x 0.64 w w w
1/4 x .035 6.4 x 0.90 w w
3/8 x .025 9.5 x 0.64 w w
3/8 x .035 9.5 x 0.90 w w w
1/2 x .020 12.7 x 0.50 * * * * *
1/2 x .025 12.7 x 0.64 w w w w w w w w
1/2 x .035 12.7 x 0.90 w w w w w
598 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
SAWING FLUIDS / LUBRICANTS
Band-Ade®
Semi-Synthetic Sawing Fluid
Extends blade life
Reduces machine wear and improves band saw
blade tool life
Water-soluble formulation
Surfaces can be welded and painted over
Does not contain silicone, Safer for the environment
Does not contain chlorine, sulfur, petroleum oils or sulfonates and
is biodegradable
Safe to use
Gentle to operators' hands; does not remove oil from skin
Container Size
Prod No. Gallon Liter Containers Per Case
68004 1 3.8 4
68005 2-1/2 9.5 2
68003 5 18.9 -
68001 55 208.2 drum -
68007 275 1040.9 tote -
Not recommended for use as a spray lubricant. Mix this product with water as recommended
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 0
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
Saw Master®
Synthetic Sawing Fluid
Extends blade life
Lubricates and cools for extended tool life
Water-soluble formulation
Surfaces can be welded and painted over
Does not contain silicone
Rejects most tramp oils
Rejects hydraulic and oils from materials
Low to non-foaming
Longest sump life
Excellent anti-microbial package prevents rancidity
Can be used in most hard water applications
Container Size
Prod No. Gallon Liter Containers Per Case
68064 1 3.8 4
68061 5 18.9 -
68062 55 208.2 drum -
68063 55 1040.9 tote -
Not recommended for use as a spray lubricant. Mix this product with water as recommended
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 1
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
Machine Cleaner
Prepares Your Sump for the use of LENOX® Sawing Fluids
Container Size
Prod No. Gallon Liter Containers Per Case
68006 1 3.8 4
NFPA Code Specs
HMIS/WHMIS
HEALTH INDEX – 1
FLAMMABILITY – 0
REACTIVITY – 0
PERSONAL PROTECTION – A
599
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
Safety
Quick Reference
Personal Protection
ARC Protection Clothing / Kits 620
Disposable Clothing / Tyvek . . . 619
Eye Protection . . . . . . . . 608 - 609
Fall Protection / Anchorage . . . 604
Fall Protection / Confined Space &
Rope Grabs . . . . . . . . . . . . . . . 606
Fall Protection / Harnesses &
Lanyards . . . . . . . . . . . . 600 - 603
Fall Protection / Kits &
Lanyards . . . . . . . . . . . . 601 - 602
Fall Protection / Lanyards &
Positioning. . . . . . . . . . . . . . . . 603
Fall Protection / Retractable
Lifelines ................. 605
Roofer's Kit
105000
• 10910 Harness
• 209712 Shock Lanyard
• 0221-50-5/8” x 50 ft. Rope
• 0110 Rope Grab - 5/8”
• 4000 Reusable Roof Bracket
• 4520 Tool Bag
Fall Protection Kits
Fall Protection Kit
30500
• 10910 Harness
• 209512 Shock Lanyard
• 4513 Heavy-duty Tool Bag
Gloves . . . . . . . . . . . . . . 614 - 617
Hard Hats . . . . . . . . . . . 610 - 611
Hearing Protection / Rainsuits /
Boots....................607
High Voltage Protection. 620 - 622
Respirators / Disposable . . . . . 612
Respirators / Air Purifying . . . . . 613
Signs. . . . . . . . . . . . . 625 - 626, 628
Winter Liners / First Aid. . . . . . 618
General Safety Supplies
Fire Extinguishers . . . . . . . . . . 627
Lockouts .................623
Pipemarkers . . . . . . . . . . . . . . 627
Rebar Caps . . . . . . . . . . . . . . . 627
Safety Padlocks. . . . . . . . . . . . 623
Traffic Safety . . . . . . . . . . . . . . 628
600 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FALL PROTECTION / HARNESSES & LANYARDS
Ameba® Plus Premium Harnesses
Moves with the wearer for extra comfort
The Ameba features a special non-
elastic helical yarn webbing that
stretches and moves with wearers
for non-binding mobility. Unlike
competitive harnesses that utilize
elastic blend webbing, the Ameba
harness maintains its shape and
structural integrity wear after wear
and most importantly, limits total
fall distance. It is the best of both
worlds, comfort and quality
Ameba 1450
Full body harness with single back
D-ring. Sizes S-M, L,-XL
Ameba 1451
Full body harness which includes
back D-ring and two side D-rings
for positioning. Sizes S-M, L-XL.
Tangle-Free, Comfort Shoulder
and Back Pad
Safelight® Full Body
Harness
Value Price, Quality
Construction
Lightweight, Universal Sizing
enables this harness to be
an excellent value for any
application.
10910
Full body harness with
single Back D-ring
10911
Full body harness which in-
cludes Back D-ring and two
side D-rings for positioning.
209512
Six foot shock
absorbing lanyard
Safelight® Fall Pro-
tection Kit for Elec-
trical and Mechani-
cal Contractors
30500
A fall protection kit
designed specifically for
the needs of Mechanical
and Electrical Contractors
Includes: 10910 Harness,
209512 Shock Absorbing
Lanyard and Kit Bag.
Part No. Description
30500 Safelight® Fall Protection Kit
10910 Full Body Harness with Mating Buckles
209512 6’ Shock Absorbing Lanyard
4513 Heavy-duty Tool Bag
1311 Ameba® Plus
Premium Harness with
Waist Pad/Tool Belt
Ergonomically designed for the
professional, the Ameba harness
adds comfort and mobility to
increase worker performance.
The Ameba design incorporates
a flexing webbing with a padded
shoulder and back pad for
comfort and mobility.
Includes back D-ring and (2) side
D-rings for positioning. Available
in sizes S-M, L-XL.
Part No. Description
Ameba 1450 Full Body Harness w/ single back D-ring
Ameba 1451 Full Body Harness w/ single back D-Ring and (2) side D-rings for postioning
Ameba 1311 Full Body Harness w/ single back D-ring, (2) side D-rings for positioning & Waist Pad/Tool Belt
D-Ring Expander
#5550
Extend the back D-Ring
on harness by 18". One
double-locking snap-
hook and D-Ring
601
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FALL PROTECTION / HARNESSES & LANYARDS
AirFlex Full Body Harness
The Ultimate Design for Cooler Wear
1511ND
Designed for the extreme conditions in the Las Vegas sun, the
Kinetic harness is engineered to provide the highest level of pro-
tection without sacrificing freedom of movement. The lightweight
and breathable construction allows for all day. Airflex combines
ergonomic design with state-of-the art webbing material for unpar-
alleled performance and wearer comfort. The webbing allows air
to flow through it for cooler wear, while the unique foam padding
actually “forms“ to the body during wear. Available in sizes S-L,
L-XL, XXL.
Includes: Back D-ring, (2) side d-rings for positioning and the exclu-
sive double waist pad/tool belt.
Part No. Description
1511ND Airflex Full Body Harness
209512 6’ Shock Absorbing Lanyard
4513 Heavy-duty Tool Bag
Airflow
EXCLUSIVE Double Back Pad
Safewaze makes extended wear
even more comfortable with the
cushion and support of a double
back pad!
1050 Feather® Full-Body
Harness
The "Original" Tangle-
Free Harness
The Feather is the original
SafeWaze harness. Today, it
remains a popular choice and
features a tangle-free D-Ring.
Includes back D-ring. Available
in sizes S-M, L-XL, XXL.
Apache® Full-Body Harness
400 lb. Fall Arrest System
The Apache webbing features a 10K tensile strength web for
heavy weight applications. It is also the only in-stock, ready-to-
ship 3x size harness.
#1040
Full body harness with single Back D-ring XXL, XXXL.
#1041
Full body harness with single Back D-ring & two side D-rings for positioning
XXL, XXXL.
Apache® Full-Body Harness w/ Comfort Shoulder
Pads and Waist/Tool Belt
#1710
Full body harness with single Back D-ring LG, XL, XXL, XXXL.
#1711
Full body harness with single Back D-ring & two side D-rings for positioning
LG, XL, XXL, XXXL.
Apache® Lanyard
For Use with the Apache Fall Arrest System
400 lb. rated lanyard for use with Apache Fall
Protection system, Class E-6 for CSA..
#3530-E
6' Shock-absorbing lanyard with 2 locking snap hooks.
Apache® Cross Arm Strap
For Use with the Apache Fall Arrest System
400 lb. rated cross arm strap for use with Apache
Fall Protection system.
#4550-E
4' Cross-Arm Strap
602 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FALL PROTECTION / KITS & LANYARDS
Roofing Fall Protection Kit
#10500
• 10950 Harness
• 209712 Shock Lanyard
• 0221-50-5/8" 50' Lifeline Rope
• 0110 Rope Grab - 5/8"
• 4000 Reusable Roof Anchor
• 4520 Tool Bag
Roofing Fall Protection Kit
#20000
• 10910 Harness
• 209512 Shock Lanyard
• 0221-50-5/8" 50' Lifeline Rope
• 0116-R Rope Grab - 5/8" (Attached)
• (2) 4651X Disposable Roof Anchors
• 5000 Bucket
Roofing Fall Protection Kit
#30570-S
• 10950 Harness
• 209712 Shock Lanyard
• 4550 6' Cross Arm Strap
• 0116-R Rope Grab - 5/8" (Attached)
• 4520 Heavy-Duty Tool Bag
SAFELIGHT™ Web Lanyard
All web lanyards employ 1" webbing with
double locking snap hooks and SafeStop
Absorber. All weight capacity: 310 lbs.
#209512
Polyester webbing
Length: 6 feet
SAFEABSORB™ Web Lanyard
All Low Profile SafeAbsorb lanyards use double-
locking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#209712
(2) Double-locking snap Stamped steel
snap hooks
Length: 6 feet
Weight capacity: 310 lbs.
SAFEABSORB™ Web Lanyards
All Low Profile SafeAbsorb lanyards use double-
locking snap hooks and have an imp
act indicator that is exposed when the lanyard
is subjected to a fall. Low Profile SafeAbsorb
lanyards feature an integrated shock absorber
that brings the worker to a smooth and easy
stop.
#3712-6'
(2) Double-locking snap forged snap hooks
Length: 6 feet
Weight capacity: 310 lbs.
#3712-4'
(2) Double-locking snap forged snap hooks
Length: 4 feet
Weight capacity: 310 lbs.
#3713
With Standard Snap and 2.75" Opening
Double Locking Rebar Hook
Length: 6 feet
Weight capacity: 310 lbs.
SAFESTOP™ Web Lanyards
All Low Profile SafeAbsorb lanyards use double-
locking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#3510
Nylon webbing
Length: 3 feet
#3511
Nylon webbing
Length: 4 feet
#3512
Nylon webbing
Length: 6 feet
#3512-0241
Includes (2) 2.75" Double-Locking Rebar Hooks
Nylon webbing
Length: 6 feet
#3510-0241
100% Tie-Off Dual-Leg Lanyard. Includes (2)
2.75" Double-Locking Rebar Hooks
Nylon webbing
Length: 6 feet
Fall Protection Kits
Lanyards
603
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FALL PROTECTION / LANYARDS & POSITIONING
SAFESTRETCH™ Expandable Web
Lanyard
All SafeStretch lanyards use double-
locking snap hooks and have an impact
indicator that is exposed when the lanyard
is subjected to a fall. SafeStretch lanyards
combine a shock absorber and lanyard
that reduces force and brings the worker
to a smooth and easy stop.
#3570
Length: 4-6 feet
Weight capacity: 310 lbs.
#3570-0241
Same as 3570 with one locking snap hook
and one 2.75" Rebar Hook
Length: 4-6 feet
Weight capacity: 310 lbs.
SAFESTOP™ Dual-Leg Web Lan-
yards
All Low Profile SafeAbsorb lanyards use double-
locking snap hooks and have an impact indicator
that is exposed when the lanyard is subjected to
a fall. Low Profile SafeAbsorb lanyards feature an
integrated shock absorber that brings the worker
to a smooth and easy stop.
#3550
Nylon webbing
Length: 3 feet
#3550-0241
Nylon webbing
Length: 4 feet
#3550-4-0241
Nylon webbing
Length: 4 feet
SAFESTRETCH™ Expandable Web
Lanyard
All SafeStretch lanyards use double-
locking snap hooks and have an impact
indicator that is exposed when the lanyard
is subjected to a fall. SafeStretch lanyards
combine a shock absorber and lanyard
that reduces force and brings the worker
to a smooth and easy stop.
#3571
100% Tie-Off Dual Leg. Nylon webbing
Length: 4-6 feet
#3570-0241
Same as 3570 with one locking snap hook
and two 2.75" Rebar Hooks.
Length: 4-6 feet
TYBAK™ Shock Absorbing
Web Lanyards / Tie-Offs
Help prevent workers from using incorrect
gear for tie-back by specifying this
”official” tie-back lanyard from SafeWaze
Specially produced, TyBak lanyards
incorporate SafeStop Absorbers and are
boldly imprinted to indicate to workers
they are approved to be used as a tie-
back. Allows the worker to adjust the
length of the lanyard to fit the work
environment.
#3812
Single Leg. Nylon webbing. Snap Hook and
6,000 lb. Rated Carabiner.
Length: 6 feet
#3813
100% Dual Leg Tie-Off. Nylon webbing.
Snap Hook and 6,000 lb. Rated Carabiner.
Length: 6 feet
Postioning Assemblies
#SP3610-S Web Assembly
2.75” Rebar Hook, 2 Double Locking Snap
hooks.
#SP3710-S 13-Link Chain
Assembly
2.75” Swivel Rebar Hook, 2 Double Lock-
ing Snap hooks .
Carabiners
#0210-3
Tear-Drop
Steel Auto-lock
Carabiner
#0210-A
Aluminum
Auto-lock
Carabiner
#0210
Steel Auto-lock
Carabiner
604 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FALL PROTECTION / ANCHORAGE
Cross Arm Straps
Part No. Description
4550 6' cross arm strap with 1.75" webbing
4550-3 Same as 4550, 3' Cross Arm Strap
4550-A Convenient Cross Arm Strap ideally suited for
quick installation. Adjustable feature ensures
handling all applications. Adjusts from 4' to 6'.
4550-E 6 ft., 400 lb. Cross Arm Strap
4550-SCS-4 4' Cable Pass Thru Cross Arm Strap
4550-SCS-6 6' Cable Pass Thru Cross Arm Strap
4550-U Heavy-Duty Cross Arm Strap with Abrasion Padding
4550-U 4550-A
Concrete Cross Arm Straps
Excellent temporary anchorage solution for
concrete forming work, designed to be cut and
removed upon completion of job
Part No. Description
4823 48" L, 2" Web Width, Incl. Steel D-ring, wear
pad and soft loop
4824 Same as 4824, w/o wear pad
4825 Same as 4823, w/ (2) soft loops
Scaffold Anchorage
Cross arm strap for scaffolding. 18" long, fits 3" maximum structure and
rated round tubing
Part No. Description
4551 Scaffold Anchorage
Girder Grip
Mobile Anchor. Fits 3/4" diameter hole. Use either
horizontally or vertically.
Part No. Description
4007 Girder Grip
BeamWalk I-Beam Anchor
Mobile anchor. Fits 3 1/2” to 14” Beams with a maximum thickness of
1-1/4". Lightweight, low-friction design allows smoother movement.
Part No. Description
4650-2 BeamWalk I-Beam Anchor
SafeClaw Concrete Anchor
The SafeClaw is a state-of-the-art removable anchor point
which is ideal for challenging tie-off applications with few avail-
able options. Rated to 5,000 lbs. Requires 3/4" hole, 3" deep.
Easy to remove and reuse.
Part No. Description
4075 SafeClaw Concrete Anchor
Manuclave Industrial Anchor
Spring-loaded, stainless steel design opens by hand. Lightweight and easy
to install.
Part No. Description
252 6" Manuclave
251 3" Manuclave
Reusable Roof Anchor
Steel construction. Fits any pich angle. Ap-
proved for metal decking
Part No. Description
4000 Reusable Roof Anchor
605
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FALL PROTECTION / RETRACTABLE LIFELINES
M30, M40, M50,
M65 & M75
Style
MS11
MS30, MS40
and MS50
Styles
MS Series
(Tear-resistant Webbing)
RLD Series
(Steel 3/16”
Cable) Part Case Cable or Cable / Web Wt.
No. Material Web Mtl Length (ft) (lb)
RLD Series
RLD20 Polymer Steel cable 20’ 6.2
RLD25 Polymer Steel cable 25’ 6.9
RLD30 Polymer Steel cable 30’ 7.8
RLD40 Polymer Steel cable 40’ 9.0
RLD50 Polymer Steel cable 50’ 10.5
RLD65 Polymer Steel cable 65’ 12.0
M Series
M15 Aluminum Steel cable 15’ 5.6
M20 Aluminum Steel cable 20’ 7.6
M25 Aluminum Steel cable 25’ 8.5
M30 Aluminum Steel cable 30’ 8.6
M40 Aluminum Steel cable 40’ 10.4
M50 Aluminum Steel cable 50’ 11.5
M65 Aluminum Steel cable 65’ 12.7
M75 Aluminum Steel cable 75’ 14.0
M100 Aluminum Steel cable 100’ 42.0
M130 Aluminum Steel cable 130’ 66.0
M160 Aluminum Steel cable 160’ 76.0
M190 Aluminum Steel cable 190’ 86.0
MS Series
MS11 Metal Alloy Web* 11’ 3.6
MS16 Polymer Web* 16’ 4.5
MS20 Polymer Web* 20’ 5.6
MS25 Polymer Web* 25’ 6.3
MS30 Polymer Web* 30’ 7.6
MS40 Polymer Web* 40’ 9.2
MS50 Polymer Web* 50’ 10.8
RLD30,
RLD40,
RLD50 &
RLD65
Style
M Series
(Steel 3/16” Cable)
SafeWaze® Retractable Lifeline Series Diagrams
*All webbing is tear resistant
RLD20 RLD25
MS20MS16
MS30, MS40
& MS50
Styles
M15 M20
M25
M100, M130,
M160, & M190
Style
MS Web Retractable Lifelines
MS Series Web Retractables utilize a tangle-free
swivel top to promote unhindered worker mobility.
Additionally, the high strength aluminum housing
and tear-resistant 7 foot web lifeline extend the
service life of all MS Series Web Retractables. Hous-
ing attaches to anchor point with a steel carabiner.
Line hardware consists of a locking snap hook which
prevents roll-out. OSHA Approved
Part No. Description
3307 Web Retractable Lifeline
TYPHOON Fall Limiter
Designed and engineered to ensure maximum
movement with the lightest weight. The Kevlar poly-
ester webbing has proven abrasion resistance and
permits additional capacity over any other brand of
lightweight limiter.
Polymer housing, with 20 foot Kevlar/Polyester Life-
line. Housing attaches to anchor point with a steel
carabiner. Line hardware consists of a locking snap
hook which prevents roll-out. OSHA Approved
Part No. Description
3300 Typhoon Fall Limiter
RAM Fall Limiter
Lightweight and compact, the Ram Fall
Limiter is ideal for warehouse order pick-
ers. Housing attaches to anchor point
with a steel carabiner. Line hardware
consists of a locking snap hook which
prevents roll-out. OSHA Approved
Part No. Description
3310 RAM Fall Limiter
606 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FALL PROTECTION / CONFINED SPACE & ROPE GRABS
Recovery System for Entry, Retrieval and Rescue
Fall protection and rescue systems for confi ned space utilize a self-contained retractable
lifeline with a built-in winch for retrieval and lowering. Tripod is aluminum with adjustable
telescopic legs.
Includes:
• 205G-50
• M10 Tripod
Additional Connections Require
0217 Pulley and 99-0210 Carabiner
Part No. Description
M2050 Complete Recovery System
M10 7' Tripod (only)
205G-50 50' 3-Way Winch for Lowering and Retrieval
205G-75 75' 3-Way Winch for Lowering and Retrieval
205G-100 100' 3-Way Winch for Lowering and Retrieval
4500 Tripod Carrying Bag
Hand Winch - Man Rated
Automatic Internal Load Lock with 65' maximum reach. No
secondary brakes or ratchets required.
Part No. Description
M10-142G Incl. M10 7' Tripod, 65' 142G Winch
142G 65' Winch
Rope & Cable Grabs
Alternate to lanyards and retract-
ables. Requires anchorage con-
nector to attach rope to anchor in
most cases.
Part No. Description
117 Rope Grab
0119 Cable Grab
117
0119
Lifeline Assemblies
Constructed of 5/8” low elasticity SafeCom
polydac blended rope..
Part No. Length / Termination
0221-25-2 25’ (2) Steel Snap hooks
0221-30-2 30’ (2) Steel Snap hooks
0221-50-2 50' (2) Steel Snap hooks
0221-100-2 100' (2) Steel Snap hook
Call For Longer
Assemblies or
for Bulk Rope
Carabiners / Snaps
All of the connecting devices listed
in this catalog meet the new 2007
ANSI Z359.1 3600 lb. standards,
unless otherwise noted as OSHA
compliant.
Part No. Description
0220-1 Forged Hook 3/4"
0220-A Aluminum Hook 3/4"
G5000-1 Stamped Hook 3/4"
0241 Pelican Hook 2-3/4"
0241-A Alum. Hook 2-3/4"
0240 Chrome Hook 2-1/4"
0210 Lg Steel Autolock
Carabiner 1"
0210-A Alum. Autolock
Carabiner 1-1/4"
0210-3 Tear-Drop Lg Steel
Autolock Carabiner
3" Opening
0220-1
0210
0210-A
0241
0210-3
607
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HEARING PROTECTION / RAINSUITS / BOOTS
Classic Foam Earplugs
• NRR 29
• Most popular earplug in the
world.
• Moisture-resistant,
dermatological safe foam is non-
irritating.
• Slow recovery foam provides
comfort with low pressure.
Part No. Description
310-1001 E-A-R Classic Earplug, Pillow Pack, 200 per box
311-1101 E-A-R Classic Corded Earplug, 200 per box
Soft® Blasts™ Foam Earplugs
• NRR 33 - The highest NRR Available
• The world's softest earplug.
• Moisture-resistant, dermatological
safe foam is non-irritating.
• Exciting designs and brillant
colors
• Self-adjusting foam provides
low pressure with excellent
attenuation.
Part No. Description
312-1252 E-A-R Soft Yellow Neon Blasts, Uncorded, 200/ box
311-1252 E-A-R Soft Yellow Neon Blasts, Corded, 200/ box
Spark Plugs™ Foam Earplugs
• NRR 33
• Fun colors "spark" up hearing protection
programs.
• Soft, low pressure foam for extra comfort.
Part No. Description
3001732 Spark Plugs Earplug, Corded, 100 per box
UltraFit® Reusable Earplugs
• NRR 25
• Patented flange design gives
the most comfortable fit of any
reusable earplug.
• Conforms to oval shape of ear.
• Washable.
• No rolling or touching of plug
portion during insertion.
Part No. Description
340-4004 UltraFit Plugs, Corded, 50/ box
RED-E-Fit Foam Earplugs
• NRR 32
• Soft foam conforms to the ear.
• Tapered shape for easy insertion.
• Comfortable design for extended
wear.
• Individually wrapped, one pair
per bag.
Part No. Description
3005542 RED-E-FIT, Uncorded, 200/ box
Onyx 26™ Earmuff
• NRR 26
• For medium noise environments.
• Lightweight, durable and
economical.
• Ultra-soft ear cushions for comfort
and extended wear.
• Ball & socket pivoting cup
attachment provides optimum
pressure distribution for maximum
noise reduction.
Part No. Description
3015086 Onyx 26 Earmuff
Rainsuits / Slush Boots
Overshoe Slush Boot
High-visibility, seventeen inch, yellow latex
boot features a rubber top strap and
buckle for a snug protective fit. Sole is
deeply grooved for a sure grip. The deep
seated heel is fully cut to fit over work
boots. Available in sizes 8 - 16. Please
order 1 - 2 sizes larger than your shoe size
for best fit.
Part No. Description Size
1CP-0059 Slush Boot 8 thru 16
Rain Suits
• .25 mm durable PVC
• Available in sizes L-5X
• 3-piece suit includes:
jacket, detachable hood
and pants
Part No. Description
70801 Rainsuit
608 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
EYE PROTECTION
Virtua™ Safety Glasses
Economical Protection
• Meets ANSI Z87.1
• Sleek - Styling for both men and women
• Lightweight - Less than 1 oz.
• Contoured flexible temples for a
comfortable fit
• Hard Coat guards against scratching,
static and chemical attack
• 10 per box
Part No. Lens
11326 Clear, Hard-coat
11329 Clear, Anti-fog
11327 Gray, Hard-coat
11328 Indoor/Outdoor Mirror
11331 Blue Mirror
Virtua V4™ Safety Glasses
Sleek Styling
• Meets ANSI Z87.1
• Sleek - Styling for both men and women
• Soft, dual injected temples for in-
creased comfort
• Universal nose bridge
• Polycarbonate lens blocks 99.9% UV
and guards against scratching, static
and chemical attack
• 10 per box
Part No. Lens
11672 Clear, Anti-Fog
11674 Indoor/Outdoor Mirror
Virtua V6™ Safety Glasses
Sport Styling
• Meets ANSI Z87.1
• Sport inspired, unisex styling
• Integral browguard
• Soft temple tips for all day comfort
• Universal fit nosebridge
• Hard coat polycarbonate lens blocks
99.9% UV and guards against scratching,
static and chemical attack
• 10 per box
Part No. Lens
11680 Clear, Hard Coat
11681 Gray
11684 Indoor/Outdoor Mirror
Virtua V5™ Safety Glasses
Adjustable Temples
• Meets ANSI Z87.1
• Adjustable temple length and lens angle
• Wraparound lens provides superior
protection
• Soft, universal nose bridge
• Hard coat polycarbonate lens blocks
99.9% UV and guards against scratch-
ing, static & chemical attack
• 10 per box
Part No. Lens
11675 Clear, Hard Coat
11679 Indoor/Outdoor Mirror
QX1000
Safety Glasses
• Meets ANSI Z87.1
• Dual 9 Base Lens - Ultimate wrap
coverage
• DX™ Anti-fog Hard Coat
• Sleek, Adjustable Black Temples for
Ultimate Comfort
• Made in the USA
• 10 per box
Part No. Lens
12101 Clear
X-Sport™ Safety Glasses
Extreme Comfort, Style
& Performance
• Meets ANSI Z87.1
• Black, sport grip temples fit more head
sizes
• Sleek, sculpted look
• Adjustable lens angles and adjustable
universal fit nosebridge
• Features DX™ Anti-fog hard coat to re-
sist scratching, static & chemical attack
• 10 per box
Part No. Lens
15176 Clear, Hard Coat
15177 Gray
15178 Indoor/Outdoor Mirror
609
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
EYE PROTECTION
Maxim™ Safety Glasses
Prescription-Quality Clarity
• Meets ANSI Z87.1
• Extended coverage for wider faces
• Superior orbital eye coverage. Virtu-
ally no area of the eye is exposed to
particulates
• Adjustable Temple length
• Sleek, sculpted look
• 3-Position lens adjustment and adjust-
able universal fit nosebridge
• Ventilation channel helps prevent fog/
heat buildup
• Features DX™ Anti-fog hard coat to re-
sist scratching, static & chemical attack
• • 10 per box
Part No. Lens
13250 Clear, Hard Coat
13251 Bronze
13253 Amber
SX™ Series Safety Glasses
Sleek, Sport Styling
• Meets ANSI Z87.1
• Sporty, contemporary look
• Distortion-free, excellent viewing range,
top to bottom, side to side.
• Adjustable length temples for comfort
and fit
• Features DX™ Anti-fog hard coat to re-
sist scratching, static & chemical attack
• 10 per box
Part No. Lens
12135 Clear, Hard Coat
12137 Gray
BX™ Readers Safety Glasses
Designed to Fit Perfectly
• Meets ANSI Z87.1
• Clear lens
• Soft-tip, adjustable temple length
• 3-Position lens adjustment and adjust-
able universal fit nosebridge
• With Reader Lenses from 1.5 to 2.5
diopter
• Features DX™ Anti-fog hard coat to re-
sist scratching, static & chemical attack
• 10 per box
Part No. Diopter
11374 1.5
11375 2.0
11376 2.5
Impact/Chemical Resistant
Goggles
• Meets ANSI Z87.1
• Durable, flexible and comfortable
• Protection for chipping, cutting or ligth
grinding applications
• Indirect venting provides chemical
splash protection
• Fits over most eyewear
• Polycarbonate lens blocks 99.9% UV
and optional DX™ anti-fog hard coat
guards against scratching, static &
chemical attack
• Made in the USA
• 10 per box
Part No. Lens
40815 Clear
40802 Clear, Anti-Fog
Lens Cleaning Towelettes
• Wall Mount
• For Glass, plastic and polycarbonate
lenses, goggles and visors
• Anti-fog, anti-static formula
• 100 individually package towelettes
per box
Part No.
3000555
WELDVIEW® Goggles
Wide angle for better vision
Critical sight for critical work, the Weld-
View Goggle is designed to give welders an
optimal viewing range during gas-welding,
burning, cutting, brazing or furnace work.
Optional cover plates give added versatility.
Features include:
• Meets ANSI Z87.1
• Soft Side and Lift Front Wide Vision
• Standard Shade 5 FILTERWELD™ Lens
• Optional Clear Polycarbonate Cover
Plate
Part No. Lens
40750-00020 Shade 5
Cover Plates
44932-00000 Clear
Polycarbonate Welding Plates
84910-00000 Shade 10
84912-00000 Shade 12
610 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HEAD PROTECTION / HARD HATS
• Ratchet holds cap in place for secure fit
• Pin-lock model has wide nape strap for secure fit
• Universal slots accommodate hearing, welding and faceshield accessories
• Comfortable six-point nylon suspension with CoolmaxCM terrycloth sweatband
Sentry III™ Cap
No. 14011
Dark Dark Hiviz Replacement
Description White Yellow Blue Green Red Gray Orange Orange Suspension
Sentry III (SNIII) w/pin-lock 14022 14009 14053 14045 14063 14031 14071 14099 14429
Sentry III (SNIII) w/ratchet 14024 14011 14055 14047 14065 14033 14073 14101 14431
Ratchet Suspension
American Allsafe Hard Hats
V-Gard® Protective Caps and Hats
Comfortable, lightweight protection
V-Gard protective caps and hats from MSA consist of a
polyethylene shell and suspension system working together as a
protection system. V-Gard headwear features advanced styling
in either cap or hat styles, with the cap available in three sizes:
small (6 to 7-1/8), standard (6-1/2 to 8) and large (7 to 8-1/2).
V-Gard caps and hats meet or exceed the applicable
requirements for a Type I helmet (top impact) as outlined in
ANSI Z89.1 1997, Class E and G (formerly Class B and A).
V-Gard caps and hats are not specifically designed to protect
against lateral blows from the front , side, or rear. MSA’s
Vanguard™ protective helmets are so designed and must be used
if lateral protection is desired. For more information, contact
your MSA distributor.
Defender® Faceshield Frames and MSA Visors
All frames come without visors.
Defender™ Frame with
Visor for V-Gard Caps
Defender™ Frame with Slim
Pro Plus Muff Assembly
with Staz-On
Suspension
with Fas-Trac
Suspension
with Uni-Pro
Suspension Color
463942 475358 10004760 White
463943 475359 10004762 Blue
463944 475360 10004761 Yellow
463945 475361 10004767 Orange
463947 475363 10004763 Red
463946 475362 10004765 Green
463948 475364 10004766 Gray (navy)
488148 488146 10004764 Hi-Viz Orange
815558 815565 — Hi-Viz Lime
Green
464852 475365 — Gold
463111 495853 — Robin’s Egg
Blue
464658 495854 — Brown
10025639 — — Granite
Part No. Description
Defender Faceshield Frames
10021614 for medium V-Gard Caps
10021616 for all MSA Slotted Caps not equipped with
lock down clip
Ear Muff Accesory for Defender Frame
10026398 Sound Blocker 26 (26 NRR)
10026460 Slim Pro Plus (23 NRR)
Visors
Type Color Size Part No.
Acetate Clear 8" x 16" x .004" 488133
611
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HEAD PROTECTION / HARD HATS
Officially-Licensed NFL V-Gard® Helmets
Wear them at work, at home or even at the game! The NFL line of V-Gard Caps with the comfortable, strap-adjustable Staz-On suspension
offers superior quality, comfort and protection. NFL v-Gard caps meet or exceed all applicable requirements for ANSI Z89.1-1997 for a
Type I helmet. Safety directors appreciate how these caps compliment their safety programs. With more workers inclined to wear them,
they can improve worker acceptance. Standard with Staz-On suspension. Please specify Team when ordering.
ARIZONA CARDINALS
1MS006901
(White)
ATLANTA FALCONS
1MS006902
(Black)
BUFFALO BILLS
1MS006904
(Red)
CAROLINA PANTHERS
1MS006905
(Silver)
CHICAGO BEARS
1MS006906
(Blue)
CINCINNATI BENGALS
1MS006907
(Orange)
CLEVELAND BROWNS
1MS006908
(Orange)
DALLAS COWBOYS
1MS006909
(Silver)
DENVER BRONCOS
1MS006910
(Blue)
DETROIT LIONS
1MS006911
(Silver)
GREEN BAY PACKERS
1MS006912
(Yellow)
NEW ENGLAND PATRIOTS
1MS006918
(Silver)
MINNESOTA VIKINGS
1MS006917
(Purple)
MIAMI DOLPHINS
1MS006916
(White)
KANSAS CITY CHIEFS
1MS006915
(Orange)
JACKSONVILLE JAGUARS
1MS006914
(Black)
INDIANAPOLIS COLTS
1MS006913
(White)
NEW ORLEANS SAINTS
1MS006919
(Gold)
NEW YORK GIANTS
1MS006920
(Blue)
NEW YORK JETS
1MS006921
(White)
OAKLAND RAIDERS
1MS006922
(Silver)
PHILADELPHIA EAGLES
1MS006923
(Robin’s Egg Blue)
PITTSBURGH STEELERS
1MS006924
(Black)
BALTIMORE RAVENS
1MS006903
(Black)
SAN DIEGO CHARGERS
1MS006925
(Purple)
SEATTLE SEAHAWKS
1MS006927
(Silver)
ST. LOUIS RAMS
1MS006928
(Black)
TAMPA BAY BUCCANEERS
1MS006929
(Brown)
TENNESSEE TITANS
1MS006930
(White)
WASHINGTON REDSKINS
1MS006931
(Red)
Logo Express Service
Print Photographic Images On Your V-Gard!
Now, in addition to custom logo imprinting in up to four separate colors, MSA offers
the Image 2000 Service. Using a digital file (disk or CD) or a photo for scanning,
MSA can reproduce your image on the front, back or sides of white V-Gard caps
and hats. Use the Image 2000 Service to print a photo of your company headquar-
ters, picture of a new site for groundbreaking celebrations or a product illustration.
Note: To ensure top quality reproduction, Image 2000 Service is only available
on white V-Gard products.
SAN FRANCISCO 49ers
1MS006926
(Gold)
612 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RESPIRATORY PROTECTION / DISPOSABLE RESPIRATORS
8210 N95 Particulate
Designed to help provide comfortable, reliable worker protection against certain non-oil
based particles. Its lightweight construction helps promote greater worker acceptance
and comfort and increased wear time. Adjustable nose clip and 3M’s Advanced Electret
Media help provide a custom fit and secure seal. NIOSH certified as being at least
95% efficient at removing solid and liquid particles (excluding those containing oil). 20
respirators to a box, 8 bx./cs. Meets NIOSH 42CFR84 N95 requirements.
8210PLUS N95 Particulate
Same features as the 8210. Includes NEW comfortable braided headbands and staple-
free attachment. 20 respirators to a box, 8 bx./cs. Meets NIOSH 42CFR84 N95
requirements.
8000 N95 Particulate Economy Respirator
An economical choice for light duty or short duration applications. Includes two-strap
design with single point attachment and adjustable nose clip to reduce eyewear fogging
and helps ensure a better seal and fit. 20 respirators to a box, 12 bx./cs. Meets NIOSH
42CFR84 N95 requirements.
8511 N95 Particulate
Uniquely designed to help provide
protection. It is ideally suited for work
settings that involve heat, humidity, or
long periods of wear. Features the added
comfort and durability of the 3M™ Cool
Flow™ Exhalation Valve and adjustable
nose clip to help provide a custom fit and
secure seal. NIOSH certified as being at
least 95% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
Meets NIOSH 42CFR84 N95 requirements.
8212 N95 Welding
Designed for applications such as welding,
soldering and other operations where
metal fumes may be present. It features
the 3M™ Cool Flow™ Exhalation Valve,
cake-resistant filter media, a comfortable
face seal and fully adjustable straps Foam
face seal ring for long lasting comfort.
NIOSH certified as being at least 95%
efficient at removing solid and liquid
particles (excluding those containing oil).
10 respirators to a box, 8 bx./cs. Meets
NIOSH 42CFR84 N95 requirements.
8514 N95 Welding
Recommended for welding on aluminum,
stainless steel, galvanized steel and other
applications where ozone and nuisance
level organic vapors are present (below
OSHS PEL). NIOSH certified as being at
least 95% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
Meets NIOSH 42CFR84 N95 requirements.
8233 N100 Particulate
Ideal for non-oil metal fume exposures to
OSHA substance specific particles such as
lead and cadmium up to 10X the OSHA
PEL.. NIOSH certified as being at least
99.97% efficient at removing solid and
liquid particles (excluding those containing
oil). 10 respirators to a box, 8 bx./cs.
NIOSH Approval TC-85A-1298.
Dust/Nuisance Mask
This dust mask provides economical
protection and relief from common
nuisance dusts. Do not use when dust
concentrations are greater than OSHA
PEL. Not rated. 50/bx., 20bx./cs.
Part No. Description
AMA3005846 Nuisance Respirator
613
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
RESPIRATORY PROTECTION / AIR PURIFYING
6000 Series Easi-Air Respirators
Silicone half mask respirator has a four-point strap assembly to properly balance
facepiece, won’t snag hair. Low profile design facepiece is molded to fit a variety of facial
features with greater comfort. Extra large inhalation and exhalation valve provides easier
breathing. NIOSH/MSHA approved.
Silicone, full facepiece respirator is soft and pliable for a comfortable fit. Double flap
face seal and six easy-adjusting straps provide superior comfort and protection. Large,
scratch-resistant polycarbonate lens faceshield provides good visibility. 100% Teflon®
speaking diaphragm allows exceptionally clear communications. NIOSH/MSHA approved.
Part No. Description
6200 Half Facepiece Respirator, Size Medium
6300 Half Facepiece Respirator, Size Large
Series 6000 Cartridges & Filters
Part No. Approved For Notes*
6001 Organic Vapor 2/pk. Organic Vapors of not more than 1000 ppm 2,3
6002 Acid Gases 2/pk. Chlorine, Hydrogen Chloride, Sulfur Dioxide, 2
Formaldehyde
6003 Organic Vapors, Organic Vapors, Chlorine, Hydrogen Chloride, 2,3
Acid Gases 2/pk. Sulfur Dioxide, Formaldehyde
6004 Ammonia, Ammonia, Methylamine 2,3
Methylamine, 2/pk.
6005 Formaldehyde, 2/pk. Formaldehyde 2,3,4
6006 Multi-Gas Vapor Organic Vapors/Chlorine/Chlorine Dioxide/Hydrogen 2,3
2/pk. Chloride/Sulfur Dioxide/Hydrogen Fluoride/Hydrogen Sulfide
6009 Mercury Vapor/ Mercury Vapor/Chlorine 2,3
Chlorine, 2/pk. TC-23C-1775
60921 Organic Vapor P100, Solid and liquid aerosols and particles, 2,3
Cartridge/Filter, 2/pk. including those containing oil.
60922 Multi-Gas/Vapor P100, Solid and liquid aerosols and particles, 2,3,4
Cartridge/Filter, 2/pk. including those containing oil.
60923 Mercury Vapor/ P100, Solid and liquid aerosols and particles, 2,3,4
Chlorine Gas, 2/pk. including those containing oil.
2071 Particulate Filter P95, solid and liquid aerosols and particles, 2,3
2/bg. including those containing oil.
2091 Particulate Filter P100, solid and liquid aerosols and particles, 2,3,4
2/bg. including those containing oil.
2097 Particulate Filter P100, with nuisance level Organic Vapor Relief 2,3,4
2/bg./10/pk. and Ozone Protection. Including those containing oil.
501 Filter Retainer, Pair For use with chemical cartridges, 2 required 2,4
*Notes
1.
Do not use in atmospheres containing less than 19.5 % oxygen, in atmospheres containing gases or vapors or in atmospheres immediately
dangerous to life and health.
2. Do not use in atmospheres containing less than 19.5 % oxygen, or in atmospheres immediately dangerous to life and health.
3. Do not wear for protection against organic vapors with poor warning properties or those which generate high heats of reaction with
the sorbent material in the cartridge.
4. P100 filters are 99.97 percent efficient against 0.3 micron DOP.
614 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HAND PROTECTION / GLOVES
Tillman™
Leather Palm Work Gloves
2-1/2" Safety Cuff
Industrial grade, shoulder split cowhide palm
and knuckle strap Canvas back. Gunn cut
with 2 1/2" rubberized safety cuff Locked
stitched for added strength. Size: Large
Part No. Size
1505XX Large
1505XL Extra Large
Tillman™
Leather Palm Work Gloves
4-1/2” Gauntlet Cuff
Industrial grade, shoulder split cowhide palm
and knuckle strap Canvas back. Gunn cut
with 4-1/2” rubberized gauntlet cuff Locked
stitched for added strength. Size: Large
Part No. Size
1509 Large
Tillman™
Leather Palm Work Gloves
Knitwrist
Economy shoulder split cowhide palm.
Clute cut cotton back, knit wrist. Locked
stitched for added strength. Size: Large
Part No. Size
1512 Large
Tillman™
Welding Gloves
14" Split Leather
Pearl, Shoulder split Cowhide. 14” length.
Cotton lined for comfort. Welted fingers
protect cotton stitching. Locked stitched
with cotton thread. Size: Large
Part No. Size
1000B Large
Tillman™
Double Leather Palm
Work Gloves
2-1/2" Safety Cuff
Standard Shoulder split Cowhide Double
palm and knuckle strap. Canvas back. Gunn
cut with 2 1/2" rubberized Safety cuff. Locked
stitched for added strength. Size: Large
Part No. Size
1515X Large
Tillman™
Winter Work Gloves
Lined Leather Palm w/Safety Cuff
Rugged, blue select shoulder cowhide palm
and knuckle strap Yellow canvas back.
ColdBlock™ poly/cotton lined for added
warmth. Waterproof lining keeps hands
dry. Heavy duty safety cuff. Size: Large
Part No. Size
1568 Large
Leather Palm Work Gloves
615
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HAND PROTECTION / GLOVES
Tillman™
Leather Drivers Gloves
Economy Split Leather
Pearl cowhide split. Unlined. Gunn cut,
Keystone thumb for easy movement. Dou-
ble stitching on forefinger provides extra
strength. Sizes: Medium, Large, X-Large
Part No. Size
1400M Medium
1400 Large
1400XL X-Large
Tillman™
Leather Drivers Gloves
Top grain pearl cowhide palm, bourbon
Cowhide split leather back. Unlined. Key-
stone thumb. Double stitching on forefin-
ger provides extra strength. Sizes: Large,
X-Large
Part No. Size
1414L Large
1414XL X-Large
Tillman™
Leather Drivers Gloves
Lined, Top Grain Pigskin
Tough, top grain pearl pigskin. Naturally
resistant to wet and oily conditions. Thin-
sulate™ lined for added warmth. Gunn cut,
Keystone thumb. Size: Large
Part No. Size
1419 Large
Leather Drivers Gloves
Tillman™
Truefit™ Mechanic’s
Leather Work Gloves
Premium Goatskin
Top grain goatskin and spandex design.
Double leather palm, reinforced thumb,
smooth leather finger tips and leather
side bolsters. Elastic cuff. Sizes Large and
X-Large.
Part No. Sizes
1470L Large
1470XL X-Large
Tillman™
Truefit™ Mechanic’s
Leather Work Gloves
Premium Goatskin
Top grain Goatskin construction for the
best dexterity. Leather and spandex design
will outlast and outperform all-synthetic
high dexterity gloves. Double palm and
thumb for longer life and better gripping
power. Double reinforced fingertips. Longer
elastic cuff with hook and loop closure
provides secure fit and more support. Top
grain leather side bolsters add additional
protection for side surface work. Breath-
able finger design wicks away moisture.
Sizes Large and X-Large
Part No. Sizes
1490L Large
1490XL X-Large
Tillman™
Winter Work Gloves
Polar Fleece w/ Leather Palm
Polar fleece offers a lightweight and warm
alternative for winter work gloves. Soft and
luxurious feeling, the integrated ColdBlock™
lining keeps the draft off your fingers. Rug-
ged leather palms will take plenty of abuse.
Elastic at the wrist keeps out the cold and
snow. Rugged blue cowhide split palm.
Soft, comfortable and warm gray polar
fleece with ColdBlock™ lining. Elastic wrist
for snug fit, keeps out the cold. Sizes Large
and X-Large
Part No. Size
1584 Large
1584XL X-Large
Mechanic's Gloves
616 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HAND PROTECTION / GLOVES
Tillman™
#1532 Cotton Work Gloves
Knit Cotton String
8 oz. cotton/polyester string knit. Knit
wrist. Universal size. Sold per dozen only
Tillman™
#153 Canvas Work Gloves
8 oz. Cotton
8 oz. cotton Canvas. Knit wrist. Size Large
Tillman™
#1533 Cotton Work Gloves
8 oz. String Knit w/ PVC Dots
8 oz. string knit cotton. PVC Dots on both
sides of each hand. Knit wrist. Size Large
Tillman™
#1541 Brown Jersey Gloves
9 oz. Unlined Cotton Jersey
Economy, 9 oz. brown jersey. Knit wrist.
Unlined. Size Large.
Tillman™
#1545 Brown Jersey Gloves
9 oz. Lined Cotton Jersey
9 oz. brown jersey. Red fleece lining for
added warmth. Knit wrist. Size Large
Tillman™
#962L Kevlar Knit Gloves
with PVC Dots
Cut-Resistant Protection
Standard weight 100% Kevlar® knit. PVC
dots on both sides for better gripping. Knit
wrist. Provides added cut and abrasion
resistance. Men’s Large
Cotton Work Gloves
Tillman™
#1539 Cotton Work Gloves
Economy Latex Dipped String Knit
Economy latex dipped string knit. Light
texture red latex coating. Provides added
abrasion, snag and cut resistance for light
duty applications. Size Large
Tillman™
#1760L Cotton Work Gloves
Premium Latex Dipped String Knit
Premium latex dipped string knit. Textured
blue latex coating Stretch fabric cotton liner.
Excellent dexterity and feel. Size Large
Don't See Your Glove
Here?
Give us a call!
Our Sales Team can find
your glove and save you
money!
617
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HAND PROTECTION / GLOVES
Ansell
Disposable Nitrile Gloves
TNT Blue disposable nitrile gloves are
durable yet soft for improved comfort.
Features textured fingers for exceptional
grip. Available lightly powdered. 5 mil, 100
per box. Sizes Large and X-Large.
Part No. Size
012-92675L Large
012-92675XL X-Large
Disposable Latex Gloves
Disposable Latex gloves feature: 5 mil.
Ambidextrous. Non-sterile. Packed 100 per
box. Sizes Large and X-Large
Part No. Size
813-2500 Large
127-5050 X-Large
Tillman™
#1700 PVC Coated
Work Gloves
Knit Wrist
Single dip economy PVC coated. Smooth
finish. Interlock lining, knit wrist. Size: Large
Tillman™
#1714 PVC Coated
Work Gloves
14" Guantlet
Single dip economy PVC coated. 14" length.
Smooth finish Interlock lining. Size Large
Coated Gloves
PIP
MAXIFLEX™ Seamless Gloves
Micro-Foam Coated Nitrile
G-Tek® MaxiFlex™, black micro-foam nitrile
coated palm & finger tips, gray seamless
knit nylon liner.
• Ultra cool and very comfortable to
wear, breathable coating keeps hands
cool and dry
• Excellent dexterity, sensitivity and
tactility
• Designed to produce minimal lint and dust
• Minimal penetration (strike through) keeps
the liner soft on the inside of the glove
• Silicone free
Applications:
Used in applications which require a
high degree of dexterity and sensitivity,
especially where grip is important, such as
handling small oily parts and components,
general assembly, machining, micro-engi-
neering, automotive components, painting,
horticulture.
Part No. Size Coating
34-874L Large Coated Palm &
Fingertips
34-875M Medium Coated Palm &
Full Fingers
34-875L Large Coated Palm &
Full Fingers
34-874
34-875
Tillman™
#1545
Brown Jersey Gloves
9 oz. Lined Cotton Jersey
9 oz. brown jersey. Red fleece
lining for added warmth. Knit
wrist. Size Large
Tillman™
Winter Work Gloves
Polar Fleece/Leather
Palm Gloves
See complete description on
page 615.
Part No. Size
1584 Large
1584XL X-Large
Tillman™
#1419 Leather
Drivers Gloves
Lined, Top Grain Pigskin
Tough, top grain pearl pigskin.
Naturally resistant to wet and
oily conditions. Thinsulate™ lined
for added warmth. Gunn cut,
Keystone thumb. Size: Large
Tillman™
#1568 Winter
Work Gloves
Lined Leather Palm w/
Safety Cuff
Blue select shoulder cowhide
palm and knuckle strap, yellow
canvas back. Lined for added
warmth. Waterproof lining
keeps hands dry. Heavy duty
safety cuff. Size: Large
Cold Weather Gloves
618 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
WINTER LINERS / FIRST AID
PacKit Eye and Skin Flush formulation is a sterile, isotonic,
buffered solution
that works to
neutralize the
effects of acids and
alkalis while flushing
away chemicals,
foreign particles
and irritants from
the eye. The 1 oz
and 4 oz eye flush
sizes come in squirt
bottles that are
packaged for use in
first aid kits. Where the risk of chemical splash is present, a 32
oz station can be kept right at hand for immediate personal use
during transport to a 15 minute fixed flow facility. The dual 16
oz bottle station is ideal for construction sites or other remote
locations. If one bottle is used, the second stays on the job until
the other can be replaced.
Part No. Contents
8FU-0029 1 oz Eye Flush
8FU-0143 4 oz Eye Flush
8FU-0056 2-16 oz with station
8FU-0055 16 oz Refill
8FU-0067 1-32 oz with station
8FU-0057 32 oz Refill
For smaller facilities or offices, or
use in vehicles or job sites, you can
find the First Aid kit that fits your
need. Each kit provides components
for treating 10, 25, 50 or 100
employees. All contents are neatly
packaged and are easy to locate,
use and replace. No.10 and No. 25
kits are packed in polypropylene
weatherproof case; No. 50 kit has a
weatherproof steel case: No.100 features a steel case. All cases
are suitable for wall mounting or carrying to the treatment site.
Contents: #10 # 25 #50 #100
• Adhesive strips 16 50 100 200
• Large wound dressing pack - 1 2 4
• Gauze Pads 4 (3”) 5 (4”) 10 (4”) 25 (4”)
• Gauze Bandage, 4” 1 1 2 4
• Eye Pads 2 2 4 4
• Adhesive Tape, 1/2” x 5 yd 1 1 1 3
• Triangular Bandage 1 1 2 4
• Elastic Bandage - - 1 (2”) 1 (4”)
• Antiseptic Towelettes 10 10 20 50
• First Aid/Burn Cream, 7/8 oz - 1 1 2
• Aspirin 10 10 20 200
• Eye Flush 1 (1 oz) 1 (1 oz) 1 (4 oz) 1 (4 oz)
• Cold Pack - 1 2 4
• Latex Exam Gloves 2 pair 2 pair 2 pair 10 pair
• Scissors 1 1 1 1
• Forceps 1 1 1 1
• First Aid Instructions 1 1 1 1
Part No. Contents
NEFPAC6410 10 Person First Aid Kit
NEFPAC6430 25 Person First Aid Kit
NEFPAC6450 50 PErson First Aid Kit
NEFPAC6135 100 Person First Aid Kit
Refills
Part No. Contents
8FU-0148 #10 Wound Dressing Pack
8FU-0149 #25 Wound Dressing Pack
8FU-0151 #25 Complete Refill Pack
8FU-0151 #50 Wound Dressing Pack
8FU-0001 Adhesive Strips, 16 per box for #10 kit
8FU-0080 Adhesive Strips, 50 per box for #25 kit
8FU-0081 Adhesive Strips, 100/box for #50 and #100 kits
8FU-0020 Triangular Bandage
8FU-0091-03 Elastic Bandage, 4”
8FU-0123 Antiseptic Towelettes, 50 per box
8FU-0008 First Aid/Burn Cream, 7/8 oz for #25, #50 & #100 kits
8FU-0049 Aspirin, 25 x 2 /box for #10, #25 & #50 kits
8FU-0131 Aspirin, 100 x 2 per box for #100 kit
8FU-0029-01 Eye Flush, 1 oz bottle for #10 and #25 kits
8FU-0061 Eye Flush, 4 oz bottle for #50 and #100 kits
8FU-0017 Cold Pack
8FU-0040 Latex Exam Gloves, 2 pr/box for #10, #25 & #50 kits
8FU-0138 Latex Exam Gloves, 10 pair/box for #100 kit
Eye and Skin Flush Stations Industrial First Aid Kits
Winter Liners
Winter Helmet Liners
225+ Quilted Liner: Blue quilted nylon
shell with fastener straps.
AA-7: Snug fit keeps wind out of cap.
Knitted Polyester.
AA-9: Full-face, cap-style liner. Knitted
Polyester
305TSL: Thinsulate inner panels and red
heavyweight fleece lining. Full head &
neck coverage with extra-wide wrapped
collar. Shoulder length liner can tuck
into jacket. 100% cotton denim exterior
with black fasteners
Part No. Description
3000442 225+ Quilted Liner
3000435 AA-7 Knitted Liner
3005342 AA-9 Knitted Liner
3000443 305 TSL Knitted Liner
3005342 AA-9 Knitted Liner
619
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
DISPOSABLE CLOTHING / TYVEK
Limited Use - Protective Clothing and Fabrics
Poly-Coated Tyvek® QC
Polyethylene-coated garments provide
excellent lightweight protection from many
acids and other liquid chemicals. It is a
good choice for use in many industrial
plants and chemical clean-up operations.
Available in yellow.
Tyvek / Saranex® 23-P
Tyvek/Saranex® 23-P is a laminate of
Dupont’s Tyvek and Dow Chemical’s
Saranex 23-P film. This fabric is
lightweight and offers an economical
protection against a broad array of
chemicals.
Hooded Coveralls
Generous cut coverall with elastic wrists and ankles.
Features attached hood for extra protection. Full length
front zipper closure for convenient on/off. ANSI sized for
uniformity.
Available in White Tyvek or yellow poly-coated Tyvek
QC.
Please specify S, M, L, XL, XXL or XXXL.
Part No. Description
TY127S Tyvek hooded coverall, 25 per case
QC127S Poly-coated Tyvek QC, 12 per case
Coveralls
Generous cut coverall open wrists and ankles for working
comfort. Features raglan sleeves for ease of movement with
full length front zipper closure for convenient on/off.
Uncoated Tyvek is also available with elastic wrists and
ankles to shut out airborne contaminants. ANSI sized for
uniformity.
Available in white Tyvek and yellow poly-coated Tyvek QC.
Please specify S, M, L, XL, XXL or XXXL.
Part No. Description
TY120S Tyvek coverall, 25/case
TY125S Tyvek coverall with elastic wrists/ankles, 2/case
QC120S Poly-coated Tyvek QC, 12 per case
Tyvek®
This unique material (a spunbonded olefin)
used for years in industry has found
broad acceptance and been proven to
give protection to workers in all walks of
industry. Tyvek offers high strength and
provides an excellent barrier to many dry
particles, including asbestos, lead dust
and radioactive dusts.
Warning: Although uncoated Tyvek
provides some liquid splash protection,
it is not suggested for use against liquid
chemicals or gases because chemical
permeation from continued chemical
exposure occurs quickly.
Hooded and Booted Coveralls
Complete with attached hood, boots, non-sparking
zipper and elastic wrists and ankles. Elastic hood
closure provides a tight seal around both half face
and full face respirators. ANSI sized for uniformity.
Available in white Tyvek, yellow poly-coated Tyvek QC,
and gray Tyvek/Saranex 23-P.
Tyvek/Saranex coveralls include sock boots and boot
flap to accommodate appropriate chemically resistant
footwear.
Please specify S, M, L, XL, XXL or XXXL.
Part No. Description
TY122S Tyvek coverall, 25 per case
QC122S Poly-coated Tyvek QC, 12 per case
Protective Fabrics
Protective Clothing
620 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
ARC PROTECTION CLOTHING / KITS
HAZARD RISK
CATEGORY 3 KITS
Part Safety Clothing Insulating Glove Carrying Hot
No. Glasses Style Glove Bag Bag 52599 Backpack
52700 Yes Jacket Class 00 Yes Yes No
Overalls
52701 Yes Jacket Class 0 Yes Yes No
Overalls
52703 Yes Jacket Class 2 Yes Yes No
Overalls
52702 No Jacket No No Yes No
Overalls
52787 Yes Coveralls Class 00 Yes Yes No
52788 Yes Coveralls Class 0 Yes Yes No
52789 Yes Coveralls Class 2 Yes Yes No
52765 No Coveralls No No Yes No
52766 Yes Jacket Class 00 No No Yes
Overalls
52767 Yes Jacket Class 0 No No Yes
Overalls
52768 Yes Jacket Class 2 No No Yes
Overalls
52769 No Jacket No No No Yes
Overalls
52940 Yes Coveralls Class 00 No No Yes
52941 Yes Coveralls Class 0 No No Yes
52942 Yes Coveralls Class 2 No No Yes
52943 No Coveralls No No No Yes
52944 Yes Jacket Class 00 No No Yes
Overalls
52955 Yes Jacket Class 0 No No Yes
Overalls
52956 Yes Jacket Class 2 No No Yes
Overalls
52957 No Jacket No No No Yes
Overalls
52970 Yes Coveralls Class 00 No No Yes
52971 Yes Coveralls Class 0 No No Yes
52972 Yes Coveralls Class 2 No No Yes
52974 No Coveralls No No No Yes
All kits listed
come with
33 cal/cm2
clothing, safety
helmet (52540)
and 33 cal/
cm2 Arc Hood
(52685). Kits
containing in-
sulating gloves
include glove
protectors.
Please specify
flame resistant
clothing and
insulating glove
sizes.
ARC Protection Clothing
62 cal/cm2
Multi-Layer 12 oz. INDURA® Ultra Soft
over 12 oz. INDURA® Ultra Soft
Jacket Size Overall
52690 Medium 53690
52691 Large 53691
52692 X-Large 53692
52693 XXL 53693
52694 XXXL 53694
52695 XXXXL 53695
52696 XXXXXL 53696
83 cal/cm2
Multi-Layer 12 oz. INDURA® Ultra Soft
over7 oz. and 12 oz. INDURA® Ultra Soft
Jacket Size Overall
52881 Medium 52888
52882 Large 52889
52883 X-Large 52900
52884 XXL 52901
52885 XXXL 52902
52886 XXXXL 52903
52887 XXXXXL 52904
100 cal/cm2
1-Ply 10 oz. Twaron® microfiber, 1-ply Car-
bon X® Felt, 1-Ply 11 oz. Carbon X® Twill
Jacket Size Overall
52749 Medium 53749
52750 Large 53750
52751 X-Large 53751
52752 XXL 53752
52753 XXXL 53753
52754 XXXXL 53754
52755 XXXXXL 53755
621
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
HIGH VOLTAGE PROTECTION
Part Safety Hazard Flash
No. Description Risk Cat. Protection
52515 High Visibility Arc Hood 2 21 Cal/cm2
52516 High Visibility Arc Hood 2 21 Cal/cm2
W/O Hard Hat
52517 Replacement Window 2 21 Cal/cm2
52543 Balaclava Hood 4 47 Cal/cm2
52544 Arc Goggle 4 38Cal/cm2
52685 Flash Protection High Visibility 4 33Cal/cm2
Arc Hood - Double Layered
52686 Replacement Window 4 33Cal/cm2
45Cal/cm2
52850 Flash Protection High Visibility 4 45Cal/cm2
Arc Hood
52687 Flash Protection Arc Hood 4 62Cal/cm2
52688 Replacement Window 4 62Cal/cm2
52880 Flash Protection Arc Hood 4 78Cal/cm2
52689 Flash Protection Arc Hood 4 100Cal/cm2
52699 Replacement Window 4 100Cal/cm2
ARC Hoods
Size Class Description Glove Protector Glove Bag = Kit
8 00 Low Voltage (500 V Max.) 51298 51291 22100 52298
8-1/2 00 Low Voltage (500 V Max.) 51299 51291 22100 52299
9 00 Low Voltage (500 V Max.) 51300 51292 22100 52300
9-1/2 00 Low Voltage (500 V Max.) 51301 51293 22100 52301
10 00 Low Voltage (500 V Max.) 51302 51293 22100 52302
10-1/2 00 Low Voltage (500 V Max.) 51303 51294 22100 52303
11 00 Low Voltage (500 V Max.) 51304 51294 22100 52304
11-1/2 00 Low Voltage (500 V Max.) 51305 51295 22100 52305
12 00 Low Voltage (500 V Max.) 51306 51295 22100 52306
7 0 Low Voltage (1000 V Max.) 51110 50301 22100 51100
8 0 Low Voltage (1000 V Max.) 51111 50302 22100 51101
8-1/2 0 Low Voltage (1000 V Max.) 51112 50303 22100 51102
9 0 Low Voltage (1000 V Max.) 51113 50303 22100 51103
9-1/2 0 Low Voltage (1000 V Max.) 51114 50305 22100 51104
10 0 Low Voltage (1000 V Max.) 51115 50305 22100 51105
10-1/2 0 Low Voltage (1000 V Max.) 51116 50307 22100 51106
11 0 Low Voltage (1000 V Max.) 51117 50307 22100 51107
11-1/2 0 Low Voltage (1000 V Max.) 51117 50309 22100 51108
12 0 Low Voltage (1000 V Max.) 51119 50309 22100 51109
8 2 High Voltage (20 KV Max.) 20160 20001 22200 20171
8-1/2 2 High Voltage (20 KV Max.) 20161 20003 22200 20172
9 2 High Voltage (20 KV Max.) 20163 20003 22200 20173
9-1/2 2 High Voltage (20 KV Max.) 20164 20005 22200 20174
10 2 High Voltage (20 KV Max.) 20165 20005 22200 20175
10-1/2 2 High Voltage (20 KV Max.) 20166 20007 22200 20176
11 2 High Voltage (20 KV Max.) 20167 20007 22200 20177
11-1/2 2 High Voltage (20 KV Max.) 20168 20009 22200 20178
12 2 High Voltage (20 KV Max.) 20169 20009 22200 20179
Glove and Kits
Electrical Arc Hood
The Flash Arc Hood incorporates UV and IR absorbing window providing protection up
to 100 cal/cm2. Past generations of gold reflective face shields only provided up to 7.33
cal/cm2 of protection, and the typical clear face shield only 1.2 cal/cm2.
The green tint window is coated with a permanent anti-fog inner surface. Code #52509
Storage Bag Available for Hood
Arc Hoods are supplied with Hard Hat Adapter and Safety Helmet.
Insulating Glove and Kits ASTM D120-2A
Each glove kit consists of one pair of insulating gloves, leather protectors and a storage bag.
Even though you are using insulated tools, you must still wear the required gloves. The gloves protect the hands and wrist
Employees working in areas where there are potential electrical hazards shall be provided with and shall use, electrical protective equipment
that is appropriate for the specific parts of the body to be protected and for the work to be performed. OHSA 1910.335
622 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
HIGH VOLTAGE PROTECTION
Meter Service Belt Pouch
(Shown) Part No.13202
Electrician’s Service Pouch
Part No. 13204
Light Weight - Fully Loaded Approximately 7 lb.
Part No. Description
20304 36" x 36" Class 0 Type I (1000V Max) Blanket
20305 36" x 36" Class 2 Type I (20,000V Max) Blanket
20310 Blanket Canister
20300 36" x 36" Class 2 Blanket Kit (Blanket, Clamps, & Canister)
20301 36" x 36" Class 0 Blanket Kit (Blanket, Clamps, & Canister)
20320 Blanket Clamps
20299 Magnetic Blanket Button
Flashlight and tape not included
*8” Adjustable Wrench not insulated per ASTM F1505 Standard - insulated against grounding only
Type I Insulating Blankets & Accessories
Flash Protection
Arc Shields
• Permanent anti-fog coating
• Light green tint
• For use with flame-resistant clothing
Part No. Description Cal/cm2
52510 Arc Shield with Hard hat 10
52511 Arc Shield only 10
Meter Service Belt Pouch
Composite Knife 14300
1/8” x 4” Slot Composite Screwdriver 00813
1/4” x 6” Slot Composite Screwdriver 00848
5/16” x 6” Slot Composite Screwdriver 00849
No. 2 x 4” Phillips Composite Screwdriver 00856
Wire Stripper 10080
7-1/2” Diagonal Cutter 10033
10” Water Pump Pliers 10071
* 8” Adjustable Wrench 10092
9” Linesman Pliers 10006
6” Needle Nose 10010
Slotted Composite Holding Screwdriver 00560
3/8” x 3” Composite Hex Nut Driver 00886
1/2” x 3” Composite Hex Nut Driver 00888
5/8” x 3” Composite Hex Nut Driver 00890
Electrician's Service Pouch
Composite Knife 14300
1/8” x 4” Slot Composite Screwdriver 00813
1/4” x 6” Slot Composite Screwdriver 00848
5/16” x 6” Slot Composite Screwdriver 00849
No. 2 x 4” Phillips Composite Screwdriver 00856
Wire Stripper 10080
7-1/2” Diagonal Cutter 10033
10” Water Pump Pliers 10071
Fuse Puller 10440
9” Linesman Pliers 10006
6” Needle Nose 10010
3/16” x 3” Composite Hex Nut Driver 00880
1/4” x 3” Composite Hex Nut Driver 00882
5/16” x 3” Composite Hex Nut Driver 00884
3/8” x 3” Composite Hex Nut Driver 00886
Tool Kits
Call for a full line listing of insulated tools for high voltage use
Meets ASTM D1048-05 Standard
Lightweight Flame Retardant Cotton Jackets
30" 9 oz. green firestop cotton jacket. Made
from flame retardant, 100% cotton Proban®
FR7A®. Cool comfortable, washable. Offers
protection from sudden flame exposure, light
molten splash, and sparks. Snap fasteners or
Velcro fastening system. Size S,M,L,XL,2X,3X
Part No. Description Size
6230 9 oz. 30" Jacket, Snap Fasteners
6230V 9 oz. 30" Jacket, Velcro Closure
623
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
LOCKOUTS
Safety Lockouts Hasps
Allows up to 6 workers to lockout
a single energy source. Constructed
of vinyl-coated high tensile steel
and plated to resist rust. Accepts
padlocks up to 3/8” shackle
diameter. Available in two sizes,
1” and 1-1/2” diameter jaws. Sold
twelve hasps per package.
Part No. Description
420 Lockout, 1" diameter jaws
421 Lockout, 1-1/2" diameter jaws
Lockout / Tagout
Lockout Station
High visibility Lockout Stations make your locks, tags and lockouts
easy to find and use. Built for the toughest conditions. Made
of durable polycarbonate material. Available empty or stocked.
Stations are yellow with black heading with yellow lettering.
20-Lock Department Station:
When stocked, components include 20 padlocks, 48 lockout tags
and four 1” safety lockouts.
10-Lock Station:
When stocked components include 10 padlocks, 24 lockout tags
and two 1” safety lockouts.
4-Lock Station:
When stocked components include 4 padlocks and 25 “Do Not
Operate” Tags and 12 lockout tags.
Safety Starter Kit
Includes (6) #3 Steel padlocks,
(one of each color), 2 #420
safety lockout hasps, (6)
71Tag ID Tags, and (6) 71SC9
attachment collars. Great
starter kit to any lockout/tagout
program.P adlocks keyed
differently.
Part No. Description
1220DSPL Safety Starter Kit
IT’S THE LAW
OSHA29 CFR 1910.147(b) “Tagout Devices. A prominent
warning device, such as a tag and a means of attachment, …
to indicate that the energy isolating device and the equipment
being controlled may not be operated until the tagout device is
removed.”
OSHA29 CFR 1910.147(c)(5)(ii)(A)(2) “Tagout devices
shall be constructed and printed so that exposure to weather
conditions or wet and damp locations will not cause the tag to
deteriorate or the message on the tag to become illegible.”
OSHA29 CFR 1910.147(c)(5)(ii)(d) “Identifiable. Lockout
devices and tagout devices shall indicate the identity of the
employee applying the device(s).”
OSHA29 CFR 1910.147(d)(4)(iii) “Tagout devices, where
used, shall be affixed in such a manner as will clearly indicate
that the operation or movement of energy isolating devices
from the “safe” or “off” position is prohibited.”
Call NEFCO for ALL
your Lockout /Tagout Needs:
• Lockout Tags
• Tag Holders
• Lockout Hasps
• Safety Tag Centers
• Lockout Centers
• Lockout Stations
• Circuit Breaker Lockouts
• Valve Lockouts
• Gate Valve Lockouts
• Ball Valve Lockouts
• Butterfly Valves Lockouts
• Pneumatic Lockouts
• Electrical Plug Lockouts
• Switch Lockouts
• Color Coded Padlocks
• Lockout Signage
• Lockout Handbooks
Lightweight Safety Padlock
Special "Safety Lockout" markings and
labels. 1-1/2" wide, 1-3/4" tall non-
conductive Xenoy™ body. Extra-long
standard steel shackle. Restricted safety
lockout 6-pin tumbler. Key retaining
feature. Eight color options: Red (RED),
Orange (ORJ), Yellow, (YLW), Green
(GRN), Blue (BLU), Teal (TEAL), Purple
(PRP), and Black (BLK). Add desired
color suffix to Part Number.
Part No. Description
410 Keyed Different. 1-1/2" Shackle
410LT Keyed Different, 3" Extra Length Shackle
410KA Keyed Alike, 1-1/2" Shackle
410KAL Keyed Alike, 3" Extra Length Shackle
410MK Master Keyed, 1-1/2" Shackle
410KAMK Keyed Alike, Master Keyed 1-1/2" Shackle
624 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
LOCKOUT TAGS
Available Bilingual - Call
Available Bilingual - CallAvailable Bilingual - CallAvailable Bilingual - Call
Available Bilingual - Call
Available Bilingual - Call
Available Bilingual - CallAvailable Bilingual - Call
625
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
CONSTRUCTION SIGNAGE
OSHA Signs
OSHA signs are the perfect way to alert
your employees and guests when a hazard
is present in your facility. Keep your facility
safe, buy an OSHA regulated sign today
and prevent an accident tomorrow. These
OSHA signs comply with OSHA 29 CFR
1910.145
Shown here a only a few of the signs that are available. Please call
for a a complete listing of signs available or with your needs. Signs
are available to ship within 24 hours. Custom signs available.
C135 C26 C31 C416
Sizes Available:
3" x 5" (Pressure Sensitive Vinyl Only)
7" x 10"
10" x 14"
14" x 20"
Materials Available:
.040 Aluminum
Fiberglass
Pressure Sensitive Vinyl
Rigid Plastic
(Not all legends available in all sizes
or materials, please call)
C433 C88 D162 D277
D656 D247 D46 D116
D656 D247 D46 D116
D148 D248
D257 D49
626 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
CONSTRUCTION SIGNAGE
OSHA Signs
OSHA signs are the perfect way to
alert your employees and guests when
a hazard is present in your facility.
Keep your facility safe, buy an OSHA
regulated sign today and prevent an
accident tomorrow. These OSHA signs
comply with OSHA 29 CFR 1910.145
Shown here a only a few of the signs that are available. Please call
for a a complete listing of signs available or with your needs. Signs
are available to ship within 24 hours. Custom signs available.
Sizes Available:
3" x 5" (Pressure Sensitive Vinyl Only)
7" x 10"
10" x 14"
14" x 20"
Materials Available:
.040 Aluminum
Fiberglass
Pressure Sensitive Vinyl
Rigid Plastic
(Not all legends available in all sizes
or materials, please call)
D164 D169 D592 D59
D81 D201 D79 D217
M24 D201 D201
M24
12" x 9"
Glow-In-
The-Dark
Available
M39
24" x 4"
FX22
12" x 4" FXFMA
12" x 9"
CUSTOM SIGNS
AVAILABLE!
If for some reason the
sign you need is not
available as a stock
item, you can custom
design one to your exact
requirements!
CALL TODAY FOR
A QUOTE!
627
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
PIPE MARKERS / EXTINGUISHERS / REBAR CAPS
Multi-purpose ABC extinguishers utilize mono-ammonium
phosphate dry chemical to extinguish Class A, B or C fires.
Designed for industrial use, they provide many years of trouble
free service.
Units feature large, easy-to-read pressure gauges and convenient
upright squeeze grip operation.
Each extinguisher comes with its own mounting bracket. All are
U.S. Coast Guard approved.
Bracket
Part No. Capacity UL Rating Style
466227 2 lbs. 1-A:10-B:C Wall/ Vehicle
466288 4 lbs. 2-A:10-B:C Wall
466112 5 lbs. 3-A:40-B:C Wall/Vehicle
466204 10 lbs. 4-A:60-B:C Wall
466206 20 lbs. 10-A:80-B:C Wall
Multi-Purpose Dry Chemical Extinguishers
Self-Sticking Pipe Markers
Brady Pipemarkers featuring self-sticking vinyl markers printed with weather resistant inks and offer excellent indoor/outdoor durability
and superior adhesion. Temperature rated from -40° to 180° F. Excellent application for both non-insulated and jacketed insulated
pipes. Features a wide range of legends and sizes to fit all common size pipes.
All pipemarkers conform to ANSI Standard A13.1-1981, entitled “Scheme for the
Identification of Piping Systems, developed to “ promote greater safety, by lessening the
chance for error, confusion, or inaction especially in times of emergency.” This standard
considers legend to be primary and explicit for identification of content. Arrows shall be
“used to indicate the direction of flow.
Why Mark Your Pipes?
Safety — Unmarked pipes mean danger to both life and property. Injuries have occurred
through ignorance of pipe contents, particularly in the cases of new employees or when
outside agencies are called in under emergency situations.
Economy — Reduce the probability of mistakes costing thousands of dollars with proper
pipe identification. Employees no longer need to search for blueprints to trace piping.
Employee training is also simplified with visually instructive marking.
Appearance — Bold Gothic characters on colorful ANSI/OSHA coded backgrounds
command attention. Printed markers provide unmistakable identification; sharp-edged
color bands add impact and high visibility.
For a full listing of available style and legends, please contact In-
side Sales
Specially formulated to withstand the elements. Use
outdoors or indoors with self-sticking pipemarkers.
Supplied in 30 yard, liner mounted, roll form. Choose
Black/Yellow, White Green, White/Red or White Blue in
1", 2" or 4" widths.
Directional Flow Arrow Tape
Buffalo Bargard®
Protector Caps
Part No. Description / Color
23704 A-5 Fits diameters 3/8” to 3/4”, lime green
23700 A-10 Fits diameters 3/8” to 1-1/4”, lime green
23706 A-10 Fits diameters 3/8” to 1-1/4”, lime green
23702 A-20 Fits diameters 1” to 2-1/4”, lime green
23707 Buffalo Bargard, orange
Fits No. 3 - 9, 3/8” - 1-1/4” for impalement protection
with height up to 7’6” and 250 lb
Bargard®
Protector Caps
628 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TRAFFIC SAFETY
Traffic Signage
Shown here a only a few of the signs that are avail-
able. Please call for a a complete listing of signs
available or with your needs. Signs are available to
ship within 24 hours. Custom signs available.
Traffic Signs are available with Engineer Grade
or Hi-Intensity Prismatic Reflective sheeting upon
request
TM50
18" x 12"
.043 or .063
Aluminum
TM3
18" x 12"
.043 or .063
Aluminum
TM11
18" x 12"
.043 or .063
Aluminum
TM220
18" x 12"
.043 or .063
Aluminum
TM90
18" x 12"
.043 or .063
Aluminum
TM1
18" x 12"
.043 or .063
Aluminum
N360
10" x 14"
.040 Aluminum, PS Vinyl, or
Rigid Plastic
TM132
30" x 30"
.080 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective
TM13 20" x 20"
.063 Aluminum
TM34R 18" x 18"
Rigid Plastic
TM81 30" x 30"
.063 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective Available
on TM13 and TM81
TM124
30" x 30"
.080 Aluminum
Eng. Grade or Hi Intensity
Prismatic Reflective
Type 1 Barricade
Constructed of 1/2” outdoor
grade plywood with 1-1/4” x
1-1/4” x 1/8” steel angle iron
legs painted white. 36” high in
open position, 12” top panel; 6”
bottom panel. Top panel includes
engineering-grade reflective
sheeting to meet all Federal and
State requirements. Barricade
light sold separately.
Part No. Description
1HM-0009 24” Barricade
1HM-0008 36” Barricade
Barrier Flasher Light
Flashing amber light is weatherproof, with
tamper resistant switch. 7” high-impact resistant
lexan lens. Rotates 360°. Powered by two 6
volt batteries (not included). Features photocell
operation. Unit automatically operates at dusk.
Part No. Description
1BP-0016 Flasher
Traffic Cones
Orange/red PVC material flow molded over
white inner liner. Stands up to the hottest
summers and coldest winters. Available in
all sizes, from 12” to 36” heights. Relective
Collars: Meets MUTCD requirements for
nighttime visibility. Upper 6”collar and lower
4” collar.
Part No. Description
3004020 12” Cone, Black Base
3004023 18” Cone, Black Base
3004057 28” Cone, Black Base
3005159 36” Cone, Black Base
3004254 28” Cone, Reflective, Blk Base
3004245 28” Cone, Reflective, Orange Base
Saf-T-Paddle Signs
STOP/SLOW or STOP/STOP
with 10" wooden handle.
Part No. Description
PS1 STOP/SLOW
PS2 STOP/STOP
Printed Barricade Tape
Available in 3” x 1000’ x .004 polyethylene with various
repeating legends. Caution legends are printed on yellow. Danger
legends are printed on red. Non-adhesive. Call for other legends.
Part No. Description
600CC1000 Caution/Caution 3" x 1000'
600CC300 Caution/Caution 3" x 300'
600RD1000 Danger/Danger 3" x 1000'
600RD300 Danger/Danger 3" x 300'
629
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
TRAFFIC SAFETY VESTS
ANSI Class 2 Safety Vests
Standard Style
• Hook and Loop front closure
• 360° visibility with high intensity
tape. Machine washable
• Silver bead reflective tape on
mesh or solid fabric options
• Meets ANSI / ISEA 107 - 2004
Class 2 standards
Part No. Class Color Size
Standard/Mesh
3022293 2 Orange/Silver M/LG
3022294 2 Orange/Silver XL/2X
3022295 2 Orange/Silver 3X/4X
3022296 2 Lime Silver M/LG
3022297 2 Lime/Silver XL/2X
3022298 2 Lime/Silver 3X/4X
Standard/Solid
3022287 2 Orange/Silver M/LG
3022288 2 Orange/Silver XL/2X
3022289 2 Orange/Silver 3X/4X
3022290 2 Lime Silver M/LG
3022291 2 Lime Silver XL/2X
3022292 2 Lime Silver 3X/4X
Deluxe/Solid - Zipper closure, 4 - Pockets, Orange
Color-prismatic Reflective Tape
3022279 2 Lime/Orange XL/2X
3022286 2 Lime/Silver 3X/4X
ANSI Class 2 Two-Tone Safety Vests
Deluxe Style
• 3 Pockets; 2 inside & 1
outside along with shoul-
der mic/antenna tab
• Adjustable panel-belt sys-
tem for tailored fit over
bulky clothes
• 4-Inch split fluorescent
trim with 2-inch wide su-
per bright silver retrore-
flective tape. Orange vest
feature Silver Tape over
Lime, Lime Vests feature
Silver Tape over Orange
• 2 sizes M-XL and 2X-5X
• Soft, lightweight fluorescent polyester fabric and ma-
chine washable
• Meets ANSI / ISEA 107 - 2004 Class 2 standards
Part No. Class Color Size
Deluxe/Mesh
3012877 2 Lime M/XL
3012878 2 Lime 2X/5X
3012875 2 Orange M/XL
3012876 2 Orange 2X/5X
Deluxe/Solid
3012873 2 Lime M/XL
3012874 2 Lime 2X/5X
3012870 2 Orange M/XL
3012872 2 Orange 2X/5X
Flame Retardant ANSI
Class 2 Safety Vests
Standard Style
• Soft, lightweight and fluorescent
100% polyester fabric
• Hook and Loop closure
• Fabric is treated with flame retar-
dant chemical meeting NFPA 701
• 3 sizes fit most: M/L, XL/2X,
3X/4X
• Machine Washable
• Meets ANSI / ISEA 107 - 2004
standards
Part No. Class Color Size
Standard Solid
3022263 2 Lime w/Silver Reflective M/L
3022264 2 Lime w/Silver Reflective XL/2X
3022265 2 Lime w/Silver Reflective 2X/4X
Specialty Safety Vests
Custom Vests to Identify Key Personnel
• Constructed of heavy-duty vinyl-coated fluorescent knit fabric
• Reflective 1-3/8" vertical stripes and 4" x 16" reflective
patches on both front and back
• Reflective colors of lime or white, single or double patches
• Fabric colors available: orange, blue, brown, forest
green, black, white, lime, or yellow
• Front hook & loop closure with 3⁄4" x 8" elastic straps
• Bound in 3⁄4" black vinyl binding
Standard legends include the following: COMMAND,
COMMANDER, CRIME, EMERGENCY, EMS, EMT, FIRE,
FIRE POLICE, GUARD, HAZ-MAT, INCIDENT, LIAISON,
MANAGER, MEDICAL, OFFICER, OPERATIONS, PARA-
MEDIC, POLICE, RESCUE, SAFETY, SCENE, SCHOOL
GUARD, SECURITY, SHERIFF, TRIAGE
Call Customer Service for more details
630 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
TRAFFIC SAFETY VESTS
ANSI Class 1 Safety Vests
Deluxe Style
• 4 Pocket design (2 exterior and
2 interior) for increased carrying
space
• Rugged color matched front zip-
per closure
• 360° visibility with high intensity
prismatic tape
• Machine washable
• Meets ANSI / ISEA 107 - 2004
Class 1 standards
Part No. Class Color Size
Deluxe Mesh - Lime Stripe
3022272 1 Orange M/LG
3022273 1 Orange XL/2X
3022274 1 Orange 3X/4X
3009842 1 Orange
(Solid) 2X
ANSI Class 1 Safety Vests
Standard Style
• Meets ANSI / ISEA 107-2004
Class 1 standard
• Hook and loop front closure
• Silver beaded reflective tape on
mesh fabric
• 100% polyester
• Machine washable
Part No. Class Color Size
Standard Mesh
3022269 1 Orange M/LG
3022270 1 Orange XL/2X
3022271 1 Orange 3X/4X
General Purpose GPV
Safety Vests
• 3/4" x 2" front hook and loop front
closure with 3/4" x 8" elastic side
straps
• Constructed of flat weave, 7oz.
poly vinyl coated for durability
• Can be wiped clean.
Part No. Color
Non-Reflective
3006270 Orange
Reflective
3007308 Orange, 3M Lime/
Silver
3006273 Orange, Lime Reflective
Econo Style ESK
Safety Vests
• One Size Fits Most
• Elastic Sides for easy fit
• Mesh Fabric
• Hook and look closure
Part No. Color
Non-Reflective
3017585 Orange
3017586 Lime
Reflective
3017587 Orange, 1/2” Silver Beaded
3017589 Orange, 3/4” Lime Prismatic
3017594 Orange, 1-3/8” Lime Prismatic
3017591 Lime, 3/4” White Prismatic
3017593 Lime, 1-1/2” 2-Tone Reflective
3017595 Lime, 1-1/4” 2-Tone Reflective
Tool Repair
NEFCO offers tool repair on many makes and brands
and tool rental on name-brand items from Greenlee,
Ridgid, and Milwaukee.
632 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
1 DAY 1 WEEK 4 WEEK
Cable Pulling & Fishing
Greenlee 6805 Cable Puller Pkg. w/Carriage Assembly, Rated at 8,000 lbs. $ 195.00 $ 395.00 $1,100.00
Greenlee 6004 Cable Puller Pkg. w/Carriage Assembly, Rated at 6,000 lbs. $ 180.00 $ 360.00 $1,080.00
Greenlee 6800 Cable Puller Motor 8,000 lb. rated with Force Gauge
and Floor Mount $ 110.00 $ 225.00 $ 675.00
Greenlee 6810 Cable Feeder $ 145.00 $ 295.00 $ 595.00
Greenlee UG512ST Cable Lubricator System – Ultra Glider® $ 100.00 $ 300.00 $ 695.00
Greenlee 8012 Hook Sheave 12" - 8,000 lb. Rated $ 15.00 $ 30.00 $ 60.00
Greenlee 8018 Hook Sheave 18" - 8,000 lb. Rated $ 25.00 $ 50.00 $ 100.00
Greenlee 8024 Hook Sheave 24" - 8,000 lb. Rated $ 40.00 $ 80.00 $ 160.00
Greenlee 6072 Manhole Sheave 12 ft. - 6500 lb. Rated $ 80.00 $ 240.00 $ 480.00
Greenlee 441-2 Feeding Sheave 2" $ 20.00 $ 30.00 $ 70.00
Greenlee 441-2-1/2 Feeding Sheave 2-1/2" $ 20.00 $ 30.00 $ 70.00
Greenlee 441-3 Feeding Sheave 3" $ 20.00 $ 30.00 $ 70.00
Greenlee 441-3-1/2 Feeding Sheave 3-1/2" $ 25.00 $ 35.00 $ 75.00
Greenlee 441-4 Feeding Sheave 4" $ 25.00 $ 35.00 $ 75.00
Greenlee 441-5 Feeding Sheave 5" $ 25.00 $ 35.00 $ 75.00
Greenlee 2018R Cable Tray Rollers Radius 12" - 18" $ 12.50 $ 12.50 $ 25.00
Greenlee 2018S Cable Tray Rollers Straight 12" - 18" $ 10.00 $ 10.00 $ 20.00
Greenlee 2024R Cable Tray Rollers Radius 20" - 24" $ 14.00 $ 14.00 $ 27.50
Greenlee 2024S Cable Tray Rollers Straight 20" - 24" $ 12.00 $ 12.00 $ 22.50
Greenlee 2030R Cable Tray Rollers Radius 24" - 30" $ 15.00 $ 15.00 $ 30.0
Greenlee 2030S Cable Tray Rollers Straight 24" - 30" $ 13.00 $ 13.00 $ 25.00
Greenlee 2036R Cable Tray Rollers Radius 30" - 36" $ 18.00 $ 18.00 $ 35.00
Greenlee 2036S Cable Tray Rollers Straight 30" - 36" $ 15.00 $ 15.00 $ 30.00
Greenlee 658 Cable Tray Sheave 12" long $ 10.00 $ 10.00 $ 25.00
Greenlee 659 Cable Tray Sheave 22" long $ 15.00 $ 15.00 $ 30.00
Cable Pulling & Fishing - Accessories
Greenlee 687 Reel Stand 13" – 28" $ 10.00 $ 20.00 $ 40.00
Greenlee 683 Reel Stand 22" – 54" $ 15.00 $ 30.00 $ 60.00
Greenlee 656 Reel Stand 28" – 46" $ 45.00 $ 90.00 $ 180.00
Greenlee 647 Spindle for 687 reel stand $ 5.00 $ 10.00 $ 30.00
Greenlee 684 Spindle for 683 reel stand $ 12.00 $ 24.00 $ 60.00
Greenlee 657 Spindle for 656 reel stand $ 45.00 $ 90.00 $ 180.00
Greenlee 629 Pulling Grip Kit (set screw type) $ 15.00 $ 30.00 $ 90.00
Greenlee 916 Cable Reel Hand Cart $ 30.00 $ 40.00 $ 90.0
Greenlee 910 Wire Dispenser 10 Spool w/18" Diameter $ 30.00 $ 85.00 $ 250.00
Greenlee 690 Fishing System Vacuum/Blower 1/2" to 4"
(pistons and string sold separate) $ 35.00 $ 75.00 $ 225.00
Pipe Bending
Greenlee 1818 Mechanical Bender 3/4" thru 2" EMT,
1/2" — 1-1/4" IMC & 1/2" — 1-1/2"" RIGID $ 145.00 $ 295.00 $ 895.00
ELECTRICIAN'S EQUIPMENT - RENTAL
633
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
ELECTRICIAN'S EQUIPMENT - RENTAL
1 DAY 1 WEEK 4 WEEK
Pipe Bending
Greenlee 855 Electric Bender 855 Smart Bender w/
Pendant, 1/2" thru 2" EMT, IMC & RIGID $ 200.00 $ 400.00 $1,100.00
Greenlee 882CB Hydraulic Bender 1-1/4", 1-1/2" & 2"
EMT, IMC & RIGID (less pump) $ 100.00 $ 200.00 $ 600.00
Greenlee 881CT Hydraulic Bender 2-1/2", 3", 3-1/2" & 4"
EMT, IMC & RIGID (less pump) $ 360.00 $ 695.00 $1,995.00
Greenlee 885 Hydraulic Bender 1-1/4" thru 4" one shot
5" segment RIGID Conduit
(less pump) $ 200.00 $ 500.00 $ 1,500.00
Greenlee 1802 Bending Table – Specify pipe support pins $ 50.00 $ 150.00 $ 395.00
Greenlee 1813 Bending Table for all 881 series benders $ 50.00 $ 150.00 $ 395.00
Greenlee 755 Hydraulic Hand Pump 10,000 PSI $ 20.00 $ 40.00 $ 125.00
Greenlee 767 Hydraulic Hand Pump 6,500 PSI $ 12.00 $ 24.00 $ 72.00
Greenlee 980 Electric/Hydraulic Pump 10,000 PSI $ 75.00 $ 150.00 $ 395.00
PVC Bending
Greenlee 849 Electric PVC Bender 1/2" thru 2" $ 25.00 $ 50.00 $ 150.00
Greenlee 851 Electric PVC Bender 1/2" thru 4" $ 37.50 $ 75.00 $ 225.00
Greenlee 848 Electric PVC Bender 1/2" thru 6" with motorized rotation $ 55.00 $ 110.00 $ 330.00
Greenlee 859-4 PVC Plug Kit - 2" thru 4" $ 10.00 $ 20.00 $ 60.00
Holemaking/Cutting
Greenlee 7310SB Hydraulic Punch Kit 1/2" to 4" complete $ 45.00 $ 135.00 $ 350.00
Greenlee ETS811 Cordless Cable Tray Cutter, incl. batteries & charger N/A $ 100.00 $ 250.00
Termination
Greenlee 1990 Hydraulic Crimping Tool Dieless/Manual -1000MCM cap. $ 85.00 $ 170.00 $ 500.00
Greenlee 03554 Cable Cutter, Cordless 12V, 2" Aluminum/Copper cap. $ 85.00 $ 170.00 $ 500.00
Greenlee 750 Hydraulic Cable Cutter, Includes Ram & Case (Less Pump) $ 50.00 $ 100.00 $ 270.00
Greenlee EK06FT11 Cordless Cable Crimper Dieless, incl. 2 batteries & charger $100.00 $ 300.00 $ 900.00
Greenlee HKL1232 Hydraulic Cable Crimper 12 Ton U-Die Style; $85.00 $ 170.00 $ 500.00
Dies sold separately
Confined Space
Safewaze M2050 7 Foot Tripod, 3-way Portable Access & Recovery System $ 90.00 $ 270.00 $ 810.00
Confined Space Barricade, 4-Panel $ 15.00 $ 45.00 $ 135.00
General EP8 Electric Blower 8" $ 50.00 $ 100.00 $ 200.00
Hose 8X25 Blower Hose 8" X 25’ with Securing Straps $ 15.00 $ 45.00 $ 135.00
4 Gas Detector, Confined Space, O2, LEL, H2S, CO $ —.— $ 225.00 $ 600.00
634 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
MECHANICAL CONTRACTOR'S EQUIPMENT - RENTAL
1 DAY 1 WEEK 4 WEEK
Pipe Threading
Ridgid 36475 12-R Threader Set 1/2" thru 2" – Incl.Die Heads, Ratchet
Assembly & Handle & Case (dies sold separate) $ 25.00 $ 50.00 $ 150.00
Ridgid 700 700 Power Drive $ 40.00 $ 80.00 $ 240.00
Ridgid 300C 300 Complete Threading Machine 1/8" thru
2" with stand (dies sold separate) $ 100.00 $ 200.00 $ 400.00
Ridgid 1224 1224 Threading Machine ½" thru 4"
with stand (dies sold separate) $ 240.00 $ 480.00 $1,140.00
Ridgid 141 141 Universal Geared Threader 2 ½" — 4" $ 75.00 $ 150.00 $ 450.00
Ridgid 161 161 Universal Geared Threader 4" — 6" $ 110.00 $ 215.00 $ 650.00
Ridgid 811A 811A Die Heaad 1/2” - 2” Universal (dies sold separate) $ 10.00 $ 30.00 $ 90.00
Ridgid 844 844 Drive Bar N/C with rented geared threader $ 5.00 $ 10.00 $ 30.00
Ridgid 840A 840A Universal Drive Shaft N/C w/ rented geared threader $ 25.00 $ 50.00 $ 150.00
Ridgid 758 758 Loop N/C with rented geared threader $ 5.00 $ 10.00 $ 20.00
Ridgid 346 346 Support Arms (2) N/C with rented geared threader $ 10.00 $ 25.00 $ 75.00
Ridgid 418 418 Oiler with Gun and Hose $ 10.00 $ 30.00 $ 90.00
Pipe Pressing
Ridgid 330-B Pro-Press Kit - 1/2” – 2” $ 100.00 $ 200.00 $ 600.00
Ridgid 20483 Pro-Press Ring Kit - 2-1/2” – 4” $ 75.00 $150.00 $ 450.00
Roll Grooving
Reed RG6HDCOMBO Portable Roll Groover 1-1/4" – 6" Schedule 10 & 40 $ 75.00 $ 75.00 $ 180.00
Ridgid 918 Hydralic Roll Groover 1”–12” Sched. 10;
1”-8” Sched. 40 Steel, PVC; 1”– 2” Sched. 40 SS $ 105.00 $ 215.00 $ 650.00
Ridgid 48417 Copper Roll Set for 2”– 6” Copper $ 50.00 $ 100.00 $ 150.00
Pipe Freeze
Ridgid SF-2500 Super Freeze Kit 1/2" thru 2-1/2" Copper $ 100.00 $ 250.00 $ 750.00
Pipe Thawer
Ridgid KT-200 Pipe Thawer 1-1/2" capacity, 25 ft. cable $ 25.00 $ 75.00 $ 225.00
Pipe Hole Cutter
Ridgid HC-300 Hole Cutter 3" Hole Cap., 8" Pipe capacity $ 35.00 $ 105.00 $ 315.00
Pipe Stands
Ridgid 460 460 Portable Tristand Vise - 6" cap. $ 15.00 $ 30.00 $ 90.00
Ridgid VJ-99 V Head Pipe Stand - 12" /2500 lb. cap. $ 10.00 $15.00 $ 30.00
Ridgid AR-99 Adj. Stand w/Rollers 36"/2500 lb. cap. $ 15.00 $ 30.00 $ 75.00
Pipe Cutters
Ridgid 424-S Hinged Pipe Cutter 2" thru 4" – Steel $ 20.00 $ 60.00 $ 180.00
Ridgid 466-S Hinged Pipe Cutter 4" thru 6" – Steel $ 20.00 $ 60.00 $ 180.00
Ridgid 468-S Hinged Pipe Cutter 6" thru 8" – Steel $ 20.00 $ 60.00 $ 180.00
Ridgid 246 Soil Pipe Cutter 1-1/2" thru 8" $ 15.00 $ 45.00 $ 135.00
Ridgid 258 Kit Power Pipe Cutter 2-1/2" thru 8" Incl: Cutter, 700 Power
Dr., Adapter, Blade, 2 pipe supports, foot pump, & Transport Cart $ 200.00 $ 400.00 $1,100.00
Ridgid 258XL Kit Power Pipe Cutter (Same as 258) 8” thru 12” $ 200.00 $ 400.00 $ 1,100.00
635
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
MECHANICAL CONTRACTOR'S EQUIPMENT - RENTAL
1 DAY 1 WEEK 4 WEEK
Pipe & Wire Utility Line Locator
Ridgid Utility Line Locator Kit – Includes:
SR20/ST305/20973 Locator, Transmitter, Inductive Clamp & Case $ 75.00 $ 200.00 $ 600.00
Hydrostatic Test Pump
Hydro-Test 500-302 Hydrostatic Test Pump, 115V, 500 PSI $ 25.00 $ 75.00 $ 245.00
Portable Air Cleaner
ACE 73-250 “Fume Sucker”, Collects Dust & Smoke 115V, 226 CFM $ 75.00 $ 125.00 $ 300.00
Material Handling
Sumner 2124 Material Lift (Duct Lift) 650 lb. cap. 24 ft. lift ht. $ 65.00 $165.00 $ 365.00
Sumner Cricket Pipe Buggy – The Cricket $ 25.00 $ 50.00 $ 150.00
Sumner Grasshopper Pipe Buggy – The Grasshopper $ 35.00 $ 70.00 $ 210.00
Greenlee 668 Mobile Pipe Rack/Cart 1000 lb. capacity $ 50.00 $ 50.00 $ 100.00
EZ Roll 2748 Pallet Jack 27" X 48" – 5000 lb. capacity $ 35.00 $ 70.00 $ 210.00
EZ Roll CED-1830-3HR Wood Dolly Carpeted 18"X30" 990 lb. cap $ 5.00 $ 10.00 $ 25.00
Biljax 0063-0575-11YE Sheet Rock Cart 3000 lb. capacity $ 15.00 $ 40.00 $ 75.00
Biljax 0063-0595 Sheet Rock Lift 15 ft. $ 40.00 $ 80.00 $ 250.00
Rubbermaid 1314 Tilt Truck 1 Cubic Yard 750 lb. capacity $ 25.00 $ 75.00 $ 150.00
Grip 19721 Manual Chain Hoist 1 Ton 20 ft. lift $ 30.00 $ 60.00 $ 120.00
Grip 41539 Manual Chain Hoist 2 Ton 20 ft. lift $ 40.00 $ 80.00 $ 160.00
Milwaukee 9687-20 Lever Chain Hoist 1 1/2 Ton 20 ft. lift $ 30.00 $ 60.00 $ 120.00
Milwaukee 9691-20 Lever Chain Hoist 3 Ton 20 ft lift $ 40.00 $ 120.00 $ 240.00
Lugall 3000-30SH Cable Hoist 1 ½ Ton 15 ft. lift $ 25.00 $ 50.00 $ 100.00
TC Bolt Installation Tools
Tone S60EZ TC Bolt Installation Tool 5/8" to 7/8" $ 100.00 $ 250.00 $ 700.00
Tone S90EZ TC Bolt Installation Tool 5/8" to 1" $ 125.00 $ 350.00 $ 800.00
Tone S110EZ TC Bolt Installation Tool 3/4" to 1-1/8" $ 140.00 $ 400.00 $ 900.00
Tone S80EZ TC Bolt Installation Tool - Right Angle 3/4 “ to 1" $ 140.00 $ 400.00 $ 900.00
A set of inner & outer sockets is required with the rental of all Tone tools,
Please specify size requirement(s)
Magnetic Drill Press
Hougen HMD904 Magnetic Drill Press 7/16" thru 1 ½" dia. $ 75.00 $ 150.00 $ 450.00
636 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FOR ALL TRADES - RENTAL
1 DAY 1 WEEK 4 WEEK
Core Drilling
Milwaukee 4136 Combo Base Core Drill Rig w/ 4096 Motor $ 95.00 $ 290.00 $ 830.00
Milwaukee 49-50-0200 Vacuum Pump Assembly for 4136/4096 $ 18.00 $ 54.00 $ 162.00
Milwaukee 49-22-7100 Vacuum Pad Assembly for 4136/4096 N/C N/C N/C
Diamond Prod. M-4 Combo Base Core Drill Rig with Weka DK13
hand held motor (less vacuum) $ 75.00 $ 225.00 $ 675.00
Diamond Prod. DK-13 Hand Held Core Drill Motor Dry/Wet $ 50.00 $ 150.00 $ 400.00
Diamond Prod.01878 Adapter 1 1/4-7 Female X 5/8-11 Male $ 4.00 $ 8.00 $ 16.00
Diamond Prod. 01870 Extension 5/8-11 X 12 inches long $ 4.00 $ 8.00 $ 16.00
Diamond Prod. 01873 Extension 1 1/4-7 X 12 inches long $ 5.00 $ 10.00 $ 20.00
Milwaukee 49-76-0055 Water Tank - 4 Gal. Portable Pressure Tank $ 10.00 $ 20.00 $ 40.00
Concrete & Asphalt Cutting
Dewalt D28755 Electric Cut-Off Saw -14" $ 45.00 $ 135.00 $ 270.00
Diamond Prod. SC73212 Gas Cut-Off Saw – 12" $ 50.00 $ 150.00 $ 300.00
Diamond Prod. SC73214 Gas Cut-Off Saw – 14" $ 50.00 $ 150.00 $ 300.00
Diamond Prod. SC8116 Gas Cut-Off Saw – 16" $ 60.00 $ 180.00 $ 360.00
Diamond Prod. CC1213HS-18 Road Saw – 18” Push-Type $ 50.00 $ 150.00 $ 450.00
Diamond Prod. CC1820HS-20 Road Saw – 20” Self-Propelled $ 75.00 $ 225.00 $ 675.00
Diamond Prod. CC2524HS-26 Road Saw – 26” Self-Propelled, w/ Electric Raise/Lower $ 150.00 $ 395.00 $ 995.00
Rotary Laser
Dewalt DW077KDT Rotary Laser, Self Leveling – Includes: Tripod, Rod, Battery,
Charger, Detector, Remote, Bracket, Target & Glasses $ 50.00 $ 150.00 $ 450.00
Scaffolding
Louisville Ladder Scaffold Section Indoor – 6’ X 6’ X 29 1/2"
SS0606A Includes: 2 Frames, 2 Trusses, 1 Platform,
4 Casters and 4 Stacking Pins $ 25.00 $ 50.00 $ 150.00
Louisville Ladder
398006AA Scaffold Guardrail & Toeboard Section $ 30.00 $ 60.00 $ 120.00
FE7240 40’ Fiberglass Extension Ladder $ 100.00 $ 150.00 $ 350.00
Portable Generators & Accessories
Dewalt DG4400B Gas Generator 4400 W Battery/Recoil Start $ 55.00 $ 165.00 $ 495.00
Dewalt DG6300B Gas Generator 6300 W Battery/Recoil Start $ 65.00 $ 195.00 $ 585.00
CEP 6506GU Power Distribution Box – 6 Outlet $ 25.00 $ 50.00 $ 150.00
C4312050YW Extension Cord 12/3 X 50’ $ 5.00 $ 10.00 $ 20.00
C4312100YW Extension Cord 12/3 X 100’ $ 7.00 $ 14.00 $ 28.00
637
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FOR ALL TRADES - RENTAL
1 DAY 1 WEEK 4 WEEK
Portable Compressors
Dewalt D55154 Electric Compressor 4 Gal/3.8 CFM $ 30.00 $ 90.00 $ 220.00
Dewalt D55170 Electric Compressor 5 Gal/6.5 CFM $ 35.00 $ 105.00 $ 275.00
Dewalt D55275 Gas Compressor 17 Gal/16.2 CFM $ 100.00 $ 200.00 $ 450.00
Towable Gas Compressor 185 CFM MARKET RATES VARY - Please CALL for Pricing
Hose 3/8x50Air Air Hose 3/8 X 50’ with ¼ NPT fittings $ 5.00 $ 15.00 $ 30.00
Hose 3/8x50Air Air Hose 3/4 X 50’ with Bolt fittings $ 5.00 $ 15.00 $ 30.00
Pressure Washer
Dewalt DP3900 Pressure Washer 3750 PSI with 3/8 X 50’ hose $ 100.00 $ 200.00 $ 475.00
Dewalt DP352 Pressure Washer Hose 3/8 X 50’ (Extra Length) $ 10.00 $ 20.00 $ 40.00
Rotary Hammers
Dewalt D25313K SDS Rotary Hammer 1" cap. $ 25.00 $ 50.00 $ 150.00
Dewalt D25550K Spline Drive Rotary Hammer 1 9/16" cap. $ 30.00 $ 90.00 $ 250.00
Dewalt D25600K SDS MAX Rotary Hammer 1 ¾" cap. $ 35.00 $ 105.00 $ 275.00
Demolition Hammers
Milwaukee 5337-21 Demolition Hammer 3/4 Hex 25 lb. Class $ 35.00 $ 105.00 $ 315.00
Milwaukee 5340-21 Demolition/Rotary Hammer Spline Drive 25 lb. Class $ 35.00 $ 105.00 $ 315.00
Milwaukee 5342-21 Demolition/Rotary Hammer SDS MAX 25 lb. Class $ 35.00 $ 105.00 $ 315.00
CP1230 Pavement Breaker 60 lb. Pneumatic $ 40.00 $ 80.00 $ 220.00
CP1240 Pavement Breaker 90 lb. Pneumatic $ 45.00 $ 90.00 $ 270.00
Dewalt D25980K Pavement Breaker 65 lb. Electric with cart & steel $ 75.00 $ 200.00 $ 450.00
Fans & Blowers
TPI PB36D Box Fan 36" 2 Speed - 9000/12500 CFM $ 30.00 $ 90.00 $ 200.00
Powr-Flite PD500 Carpet/Floor Dryer 3 Speed $ 25.00 $ 50.00 $ 125.00
Temporary Lighting
CEP 5710 Light Stand - 1000 Watt – 7’ Dual Head $ 10.00 $ 30.00 $ 75.00
Light Tower - Towable, 4000 Watt MARKET RATES VARY - Please CALL for Pricing
WL400MH Wobble Light – 400 Watt/40,000 Lumen $ 25.00 $ 50.00 $ 150.00
Pumps & Hose
Tsurmi LB480 Electric Submersible Pump 2" top discharge $ 30.00 $ 90.00 $ 225.00
Multiquip ST2040T 2” Electric Submersible Trash Pump $ 30.00 $ 90.00 $ 225.00
Multiquip QPT2H 2” Gas Powered Trash Pump $ 40.00 $ 100.00 $ 300.00
Multiquip QPT3H 3” Gas Powered Trash Pump $ 45.00 $ 110.00 $ 315.00
Hose 2X20SPVC Suction Hose 2” x 20’ PVC $ 10.00 $ 20.00 $ 60.00
Hose 2X50DPVC Discharge Hose 2” x 50’ PVC $ 10.00 $ 20.00 $ 60.00
Hose 3X20SPVC Suction Hose 3" x 20’ PVC $ 10.00 $ 20.00 $ 60.00
Hose 3X50DPVC Discharge Hose 3” x 50’ PVC $ 10.00 $ 20.00 $ 60.00
All Rental Rates are subject to change
Actual make & model # may differ than actual listing
638 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
FOR ALL TRADES - RENTAL
1 DAY 1 WEEK 4 WEEK
Electric Scissor Lifts
19’ Electric Scissor Lift Following Charges Apply: $ CALL $ CALL $ CALL
Delivery / Pickup Charges may apply
26’ Electric Scissor Lift Following Charges Apply: $ CALL $ CALL $ CALL
Delivery / Pickup Charges may apply
30’ - 33’ Rough Terrain Following Charges Apply: $ CALL $ CALL $ CALL
Scissor Lift
Delivery / Pickup Charges may apply
40’, 60’ and 80’ Booms
40’ Boom Rates May Vary - CALL $$ CALL $ CALL $ CALL
60’ Boom Rates May Vary - CALL $ CALL $ CALL $ CALL
80’ Boom Rates May Vary - CALL $ CALL $ CALL $ CALL
19’ Electric Scissor Lift 26’ Electric Scissor Lift Rough Terrain Scissor Lift
Market Rates Vary - Please Call for Current Pricing
639
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
FOR ALL TRADES - RENTAL
1 DAY 1 WEEK 4 WEEK
Fork Lifts
5,000 lb., Industrial Following Charges Apply: $ CALL $ CALL $ CALL
Fork Lift Delivery / Pickup Charges may apply
8,000 lb., 42’ Reach Following Charges Apply: $ CALL $ CALL $ CALL
Rough Terrain
Fork Lift Delivery / Pickup Charges may apply
Temporary Site Heating
Call for Rates 150,000 to 4,000,000 BTU’s $ CALL $ CALL $ CALL
Ground Thaw / Ground Heating / Concrete Curing
Call for Rates 3,000 & 6,000 sq. ft. $ CALL $ CALL $ CALL
SHIFTS: SINGLE DOUBLE TRIPLE
Towable Generators
Call for Rates 45kW, 60kW, 70kW, 125kW $ CALL $ CALL $ CALL
Towable Generators
Industrial Forklifts
Rough Terrain Forklifts
Temporary Site Heating
Ground Thaw/Heating - Concrete Curing
Market Rates Vary - Please Call for Current Pricing
640 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
RENTAL TERMS AND CONDITIONS
Nefco Rentals Terms and Conditions
NOTE FROM OUR RENTAL MANAGER
Throughout our catalog, we have placed a “Rent Me” Button
to assist you with a buy vs. rent decision and to let you know those
specific pieces of equipment are usually readily available for
rental. In addition, with 2008 being our first year offering rentals
as an option, our list of equipment available for rent is growing, so
if you don’t find what you’re looking for, please ask.
Payment Methods
All Nefco house accounts receive the same terms & conditions
and will not be subject to equipment deposits and damage waiv-
ers; however the damage waiver is available when requested.
For our customers who do not have a Nefco house account, the
following forms of payment are accepted: Cash, Personal or Busi-
ness Check (with proper I.D) or major credit card. Our non-house
accounts are asked to pay for their rental fees and equipment
deposit at the time of equipment acceptance by customer. Depos-
its are returned when equipment has been returned and without
exception.
1) CUSTOMER'S GENERAL RESPONSIBILITY
Under the NEFCO RENTALS (Agreement), the Customer renting
the Equipment (as that term is defined in the Rental Agreement)
is responsible to for any loss or damage to the Equipment and for
its return in the same condition in which received, except for or-
dinary wear. Such responsibility shall amount to the replacement
or repair cost of the Equipment at the time it is lost or damaged,
plus an administrative fee and NEFCO RENTALS related losses,
such as, but not limited to, loss of use, appraisal fees or costs of
recovery. In the event that the Customer is responsible for dam-
age to the Equipment, such Equipment may be repaired either by
NEFCO RENTALS or a repairer of choosing. The cost of labor for
such repairs shall be the then prevailing hourly rate for labor at
the repair facility where repairs are effectuated. The Customer will
be charged for parts at the prevailing list price established by the
manufacturer or supplier involved or as charged to NEFCO RENT-
ALS by the supplier or repair facility.
2) PROOF OF INSURANCE
As a precondition of renting Equipment from NEFCO RENTALS,
Customer must produce evidence of insurance in accordance with
the Rental Agreement, or Customer shall be required to purchase
the LDW Assurance Plan, which is NOT INSURANCE. The charge
for the LDW Assurance Plan shall be equal to 14 percent of the
rental amount.
3) WAIVER
If the Customer purchases the LDW Assurance Plan, and if the
Equipment is used in compliance with this plan, then NEFCO
RENTALS agrees to waive, to the extent specified herein and in
the Rental Agreement, its right to hold Customer liable for any
damages greater than 25 percent of the Equipment's replacement
cost.
4) WAIVER EXCEPTIONS
NOT WITHSTANDING THE CUSTOMER'S PAYMENT OF THE LDW
ASSURANCE PLAN CHARGE, THE CUSTOMER WILL BE LIABLE
TO NEFCO RENTALS FOR ALL LOSS OF OR DAMAGE TO THE
EQUIPMENT AND RELATED EXPENSES INCURRED BY NEFCO
RENTALS, resulting from any of the following circumstances:
A) The use or operation of the Equipment without NEFCO RENT-
ALS permission, or in a manner that would constitute a default
under the Rental Agreement.
B) The failure of the Customer to perform or pay for all normal
periodic and other required or recommended service, adjustments
and lubrication of the Equipment.
C) Negligent, reckless, or abusive use or operation of, or inten-
tional damage to the Equipment while the Equipment is under the
care or control of the Customer (e.g., Equipment rollover or upset,
altering the Equipment for use in a manner for which it was not
designed, coming in contact with an overhead electric power line).
D) The use or operation of the Equipment with a load exceeding
the manufacturer's rated capacity, or as a result of improper load-
ing, unloading, or transportation of the Equipment.
E) All loss or damage associated with vandalism, malicious
mischief, disappearance, theft or conversion of the Equipment,
not documented by the Customer's filing a formal written report
with the applicable public authorities (with an immediate copy to
NEFCO RENTALS) within 24 hours of the event.
F) Customer's failure to properly secure the Equipment and/or by
making it available to any unauthorized and/or untrained operator,
or by not reasonably restricting access to the Equipment.
G) Damage that occurs while Customer uses, allows the use of, or
directs another party to use the Equipment in the commission of a
crime.
H) Customer's failure to notify NEFCO RENTALS within 24 hours of
an accident that has resulted in loss or damage to the Equipment.
I) Customer provides misleading or false information to rent the
Equipment.
J) The Equipment is used by an operator while under the influence
of an intoxicant or other illegal or controlled substance.
K) Customer’s failure to pay all invoices including the LDW within
NEFCO RENTALS payment terms.
5) SUBROGATION
If Customer purchases the LDW Assurance Plan, then NEFCO
RENTALS will be subrogated to any right of the Customer to
recover against any person, firm or corporation. Customer will
execute and deliver any instruments and papers that are required
and do whatever else is necessary to secure such rights. Customer
will cooperate fully with NEFCO RENTALS and/or its insurer(s) in
the prosecution of those rights and will neither take nor permit
any action to prejudice NEFCO RENTALS rights with respect
thereto.
6) TIRE REPAIRS AND REPLACEMENT
A) The customer is responsible for ALL tire repairs or replacement.
It is the customers responsibility to inspect all tires at the time of
delivery.
641
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX A - B
a
18-8 STAINLESS BOLTS, 304 SS . . . . . 28
A193 B-7 - BOLTS . . . . . . . . . . . . . . . . 24
A193 B8/B8M BOLTS. . . . . . . . . . . . . . 25
A307 GRADE B BOLTS . . . . . . . . . . . . . 23
A325 FLAT WASHERS (F438) . . . . . . . . 39
A325 STRUCTURAL BOLTS. . . . . . . 20-21
A490 STRUCTURAL BOLTS. . . . . . . . . . 21
A7 ACRYLIC ADHESIVE . . . . . . . . . . 77-78
A-BAND HANGER. . . . . . . . . . . . . . . . 187
ABRASIVE BELTS - ALUMINUM OXIDE 474
ABRASIVE HAND PADS . . . . . . . . . . . 472
ABRASIVES . . . . . . . . . . . . . . .459-488
ABSORBENTS . . . . . . . . . . . . . . 556-558
AC CLAMP-ON METERS . . . 272, 402-405
ACCESS DOORS . . . . . . . . . . . . . 506-521
ACCO® . . . . . . . . . . . . . . see PEERLESS
ACID BRUSH . . . . . . . . . . . . . . . 487, 545
ACORN CAP NUTS - BRASS PLATED. . . 55
ACOUSTICAL FASTENERS . . . . 7, 102, 106
ACUDOR ACCESS DOORS . . . . . 506-511
ADAPTERS, HOSE . . . . . . . . . . . . . . . 560
ADHESIVE / EPOXY ANCHORING . . 74-81
ADHESIVE ACCESSORIES . . . . . . . . 74-81
ADHESIVE CAPSULES . . . . . . . . . . . . . . 76
ADJUSTABLE
Beam Clamps . . . . . . . . . . . . . 196-197
Pipe Roll Stand with Base . . . . 192-193
Pipe Saddle Support . . . . . . . . 194-195
Pipe Stanchion / Saddle . . . . . 194-195
Side Beam Clamps . . . . . . . . . . . . . 196
Spud Wrench - Clik-Stop® . . . . . . . . 453
Wrenches....................453
ADJUST-A-FIT®..................427
ADJUST-A-FLANGE®..............427
ADJUST-A-ROLLS® ...............427
ADVANCE SUPPORT PRODUCTS . . . 241
AICKINSTRUT, FIBERGLASS STRUT 150-151
AIR CIRCULATORS, INDUSTRIAL. . . . . 562
AIRCRAFT CABLE . . . . . . . . 189, 571-572
AIRCRAFT DRILL BITS. . . . . . . . . . . . . 299
ALL THREAD ROD . . . . . . . . . . . 171-178
Fiberglass Threaded Rod. . . . . . . . . 151
Stainless Steel . . . . . . . . . . . . . . . . 173
ALLEN® HEX KEYS ................58
ALUMINUM OXIDE
Closed Coat Abrasive Belts . . . . . . . 474
Fiber Discs . . . . . . . . . . . . . . . . . . 478
Paper Sheets (AW-C & AW-D) . . . . . 473
ALUMINUM PIPE WRENCH . . . . . . . . 442
ALUMINUM STRUT. . . . . . . . . . . . . . . 126
ANCHOR BOLTS. . . . . . . . . . . . . 176-178
ANCHOR BOLT SLEEVES . . . . . . . . . . 178
ANCHOR HANGING SYSTEMS
. . . . . . . . . . . . . 82, 84, 91-99, 102
ANCHOR KITS - PLASTIC . . . . . . 108-109
ANCHORS................65-124
A7 Acrylic Adhesive . . . . . . . . . . 77-78
Adhesive Accessories - Hole Plugs,
Brushes & Extension Tubing . . . . 74-80
Adhesive Anchors . . . . . . . . . . . . 74-81
Bang-It™......................87
Bantam™ Plastic Plug Anchors . . . . . 109
C6 Epoxy Adhesive . . . . . . . . . . . . . . 78
Calk-In™ ....................105
Chem-Stud™ Capsules . . . . . . . . . . . . 76
Installation Tools . . . . . . . . . . . . . . 76
Concrete Vertical Hanger
. . . . . . . . . . 94, 91, 93-94, 98, 102
ANCHORS . . . . . . . . . . . . . (continued)
Condrive.....................100
Double Expansion Shield . . . . . . . . . 104
Dropins . . . . . . . . . . . . . . . 90-92, 105
Dynabolt Sleeve Anchors. . . . . . . . . . 85
Stainless Steel Sleeve Anchors . . 84-86
G5 Epoxy Adhesive . . . . . . . . . . . 75, 79
Hammer Capsules . . . . . . . . . . . . . . . 76
Hex Coupling Nut Sleeve Anchors . . . 84
Hollow-Set Drop-In . . . . . . . . . . . . . 105
Hollow Wall Anchor. . . . . . . . . 106-110
Multi-Set II Drop-In Anchors . . . . . . . 92
Mushroom Head Spike® .........102
Mushroom Head Type 316 Stainless
Steel Spike®..............102
Rod Hanging - Pipe Spike®.......93
Tie Wire Spike. . . . . . . . . . . . . . . 102
Nylon Nailin™ .................103
Nylon Screens. . . . . . . . . . . . . . . . . . 76
Plastic Anchor Kits . . . . . . 48, 108-109
Power-Bolt® ...................86
Power-Stud™...................82
Power-Stud™ SD1...............69
Power-Stud™ SD2...............68
Power-Stud™ SD4...............70
Power-Stud™ SD6...............70
Powder Actuated Tools . . 118-119, 123
P3500 ....................118
PA3500 ...................118
P3602 ....................118
Powerfoam™...................81
Screw Anchor Expanders . . . . . . . . 105
Scru-Lead™ Anchors. . . . . . . . . . . . 105
Single Expansion Shield. . . . . . . . . . 104
Sleeve Anchors . . . . . . . . . . . 93, 84-86
Snake Anchors . . . . . . . . . . . . . . . . . 91
Spike Anchors. . . . . . . . . . . . . . 93, 102
Flat Head Spike®.............102
Installation Tools . . . . . . . . . . 93, 102
SDS Stop Bit . . . . . . . . . . . . . . . . . . 92
Stainless Steel Screens . . . . . . . . . . . 76
Steel Side Hanger . . . . . . . . . . . . 95-98
Steel Vertical Hanger . . . . . . . . . 94-98
Stubby Screens. . . . . . . . . . . . . . . . . 76
Swivel . . . . . . . . . . . . . . . . . . . . 95-96
T3 Tool.................. 111-112
T3 Accessories . . . . . . . . 112-113, 122
Trak-It Fastening Tools
. . . . . . . . . . . . . 111, 114, 116-117
Pole Tools. . . . . . . . . . 112, 114, 123
Battery . . . . . . . . . . . . . . . . 111, 114
Tool . . . . . . . . . . 111, 114, 116-117
Accessories . . . . . 111, 114, 116-117
Tapcon...................89, 100
Trubolt™ Wedge Anchors . . . . . . . 71, 83
Umbrella Inserts . . . . . . . . . . . . . . . . 76
Undercut Anchors . . . . . . . . . . . . . . . 73
Vertigo™ Anchor Hangers. . . . . . . 98-99
Wedge-Bolt® Anchors . . . . . . . . . 72, 88
410 Stainless Steel . . . . . . . . . . . 88
Carbon Steel Wedge-Bolt® BT . 72, 88
Carbon Steel Wedge-Bolt® OT . . . . 88
Carbon Steel Wedge-Bolt™. . . . 72, 88
Wood-Knocker™ ................87
Wood Side Hanger . . . . . . . . . . . 95-98
Wood Vertical Hanger . . . . . . . . . 94-98
Zamac Hammer-Screw®. . . . . . 103-104
Zamac Nailin™............. 103-104
Zip-It Wall Anchors . . . . . . . . . . . . . 108
ANCHORS - AT-A-GLANCE . . . . . . . 66-67
ANCHORS, FALL PROTECTION . . . . . . 604
ANGLE IRON (ANGLES) . . . . . . . . . . . 208
ANVIL PIPE HANGERS
. . . . . . . . . . . . . .180-198, 217-219
AO SAFETY ................ 608-609
ARBORS, HOLE SAW . . . . . . . . . 305-307
ARC FLASH PROTECTIVE CLOTHING
......................... 620-622
ASTM A193 B7 HEX BOLTS/STUDS
........................24, 174
ASTM A193 B8 & B8M
HEX CAP SCREWS . . . . . . . . . . . . . . . . . . . 25
ASTM A194 Grade 2H, 8 & 8M Nuts . . 31
ASTM A325 STRUCTURAL BOLTS. . . . . 20
ASTM A490 STRUCTURAL BOLTS. . . . . 21
ASTM A565 GRADE DH
STRUCTURAL NUTS. . . . . . . . . . . . . . . . . 21
AVIATION SNIPS . . . . . . . . . . . . . . . . 444
b
B-LINE .........see Cable Tray, Strut
B-LINE HANGERS . . . . . . . . see Hangers
B7 BOLTS, STUDS . . . . . . . . . . . . 24, 174
B8 & B8M HEX BOLTS . . . . . . . . . . . . . 25
BACK TO BACK STRUT . . . . . . . . . . . . 131
BACKING PADS . . . . . . . . . . . . . 477, 479
BAGS, TOOLS ..................457
BAND SAW LUBRICANTS . . . . . . . . . . 598
BAND SAWS . . see DeWalt & Milwaukee
BAND SAWS - PORTABLE ELECTRIC . . . 352
BANDSAW BLADES . . . . . . 353, 596-597
BANG-IT™.......................87
BANTAM PLUG WALL ANCHOR . . . . . . 109
BARGARD® PROTECTOR CAPS . . . . . . 627
BARRICADES ...................628
BARRICADE TAPE. . . . . . . . . . . . . . . . 628
BARRIER FLASHER LIGHT. . . . . . . . . . 628
BARS, DIGGING . . . . . . . . . . . . . . . . . 565
BASKET CLIP ...................115
BASKET TRAY. . . . . . . . . . see Cable Tray
BASKET TYPE PULLING GRIP SETS . . . 384
BAT WINGS (KX CADDY) . . . . . . . . . . 160
BATH TISSUE...................556
BATTERIES (FLASHLIGHT) .........530
BATTERY PACKS, LI-ION/NICAD . . 290-291
BATTERY POWERED CABLE CUTTER
..................... 395-396
BC60, BC61 (U-Bolt, Strut). . . . . . . . . 137
BEAM CLAMPS
Adjustable ...................196
C-Clamps . . . . . . . . . . . . . . . . 138, 188
Electrical Junior Top
. . . . . . . . . . . . .138, 156, 188, 221
Ice-Tong Center Load . . . . . . . . . . . 196
Malleable Iron . . . . . . . . . . . . . . . . 188
Retaining Straps . . . . . . . . . . . 188-189
Rod Lock, CADDY . . . . . . . . . . . . . . 127
U-bolt, (Strut), BC60, BC61 . . . . . . 137
Wide Mouth Top . . . . . . . . . . 138, 188
BEAM DIMENSIONS. . . . . . . . . . . . . . 208
BEAMWALK™ ...................604
BEE KILLER ....................555
BELL HANGER (COPPER - VAN) . . . . . 219
BELLEVILLE WASHERS . . . . . . . . . . . . . 36
BENCH GRINDING WHEELS . . . . . . . 484
BENDERS. . . . . . . . . . . . . . 361-365, 367
BENT EYE BOLTS . . . . . . . . . . . . 177, 569
BESSEY CLAMPS . . . . . . . . . . . . 588-589
BEVELED SQUARE WASHERS . . . . . . . . 21
BI-METAL
Bandsaw blades . . . . . . . . . . . 353, 596
Hole Saws . . . . . . . . . . . 304-306, 308
Reciprocating Saws . . . . . 270, 347-350
642 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX B - C
b (continued)
BINS .........................585
BINKLEY CLIPS. . . . . . . . . . . . . . . . . . 140
BITS . . . . . see Drilling Bits, High Speed
BIT TIPS....................10, 315
BLACK TRACK DRIVE PINS . . . . . . . . . 121
BLACKIES (FRAMER SCREWS) . . . . . . . . 4
BLADES, UTILITY . . . . . . . . . . . . 351, 444
BLOCK WIRE BRUSH . . . . . . . . . . . . . 552
BLOWERS .....................562
BLUE MASONRY SCREWS . . . . . 100-101
BOCA SAFETY NAIL PLATE . . . . . . . . . 213
BOLT BAGS ....................457
BOLTING BASICS . . . . . . . . . . . . . . . . . 17
BOLTING DIMENSIONS FOR FLANGES 23
BOLTS . . . . . see also Hex Cap Screws
A193 B7......................24
A193 B8 & B8M. . . . . . . . . . . . . . . . 25
A307 Grade B . . . . . . . . . . . . . . . . . 23
A325 Bolts, Nuts & Washers. . . . 20-21
A Bolts, Nuts & Washers . . . . . . . . . 21
Carriage......................26
Corporation Eye . . . . . . . . . . . . . . . . 52
Cor-Ten ......................52
Elevator .......................7
Flange A307 Grade B . . . . . . . . . . . . 23
Hanger.......................51
Heavy Hex A307 Grade B . . . . . . . . . 23
Hex Cap Screws
Brass ......................53
Grade 2 ....................22
Grade 5 and 8. . . . . . . . . . . . . . . . 27
Stainless Steel 304 & 316. . . . 28-29
Lag..........................26
Metric, Specs and Markings . . . . 60-61
Plow.........................52
Structural . . . . . . . . . . . . . . . . . . 20-21
Tap..........................26
Tension Control (TC) . . . . . . . . . . . . . 18
Toggle ......................106
BONDED SEALING WASHERS. . . . . . . . 39
BOOMS, ABSORBENTS . . . . . . . . . . . 558
BOOTS, RUBBER . . . . . . . . . . . . . . . . 607
BOSCH BULLDOG ...............318
BOX CUTTERS . . . . . . . . . . . . . . 351, 444
BRACING SYSTEMS - SEISMIC . . 226-229
BRACKETS . . . . . . . . . . . . . . . . . 137, 207
BRASS
Fasteners .................. 53-56
Plumb Bob...................446
BRIDLE RINGS . . . . . . . . . . . . . . 113, 115
BRIDLE SADDLE . . . . . . . . . . . . . . . . . 113
BROAD-HEAD BULL PINS. . . . . . . . . . 457
BROOMS & BRUSHES . . . . 545, 451-553
BRUSHES..........see Pferd/Advance
Miscellaneous Paint . . . . . . . . 487, 545
Nylon Abrasive . . . . . . . . . . . . . . . 485
Tube .......................488
Wire ................... 485-487
BRUTE® MOP BUCKET . . . . . . . . . . . . 550
BUCKETS..................550, 563
BUILDER'S BOARD . . . . . . . . . . . . . . . 540
BUILDEX . . . . . . . . . . . 12-15, 94-97 244
BULL-PINS.....................457
BULLDOG .....................318
BUNGIE CORDS . . . . . . . . . . . . . . . . . 538
BURIED LINE LOCATOR . . . 406, 437-438
BURRS, CARBIDE . . . . . . . . . . . . . . . . 482
BUSHINGS -METAL STUD PUNCHES . . . . . 374
BX CLIP .......................115
c
C-CLAMPS . . . . . . . . . . . . . 188, 587-588
C-PORT . . . . . . . . . . . . . see Dura-Block
C6 EPOXY ADHESIVE . . . . . . . . . . . . . . 78
CABINET SCREWS . . . . . . . . . . . . . . . . . 8
CABLE
Cutter................... 392-397
Feeder ......................382
Grab, Fall Protection. . . . . . . . . . . . 606
Pullers . . . . . . . . . . . . . . 368, 378-382
Pulling Lubricant . . . . . . . . . . . . . . . 385
Racks................... 386-387
Tray .................... 146-149
Tray Cutter...................396
Wire Rope . . . . . . . . . . . 189, 571-573
CABLE HOIST . . . . . . . . . . . . . . . 576-578
CABLE TIES ....................541
CABLE TRAY . . . . . . . . . . . . . . . . . 146-149
CADDY®
“Colorado Jim” Cable Support NEC
Compliance for Metal Stud . . . . . 158
1/4 Electrical Junior Top Beam Clamp
.....................156, 188
1/4” - 3/8” Steel Beam Clamp 156, 189
Bat Wings (KX) . . . . . . . . . . . . . . . . 160
Beam Clamps . .127, 156-157, 188-189
Box Mounting Brackets . . . . . . 158-159
Cablecat Pulley . . . . . . . . . . . . . . . . 164
Cablecat Vertical Backbone
Cable Support . . . . . . . . . . . . . . . 164
Cablecat Wide Base Cable Support
Clips......................164
Slick™ Strut Nut . . . . . . . . . . . . . . . 135
Cat-CM Cable Support System . . . . 164
CD Series....................161
Conduit Clamps . . . . . . . . . . . 161-162
Conduit Hangers from Flange, Wire
or Rod (KX) . . . . . . . . . . . . . . . . . 160
Flange Mount Conduit Clip -
Snap Close . . . . . . . . . . . . . . . . . 160
Flexible Conduit & Cable Hanger . . . 160
Flexible Conduit Hangers from
Drop Wire..................162
Hammer on Plain & Threaded
Rod Hangers . . . . . . . . . . . . . . . . 156
Hammer-On Flange Clip . . . . . 156-157
ISN Smart Nut . . . . . . . . . . . . . . . . 165
ISSP Strut Plate . . . . . . . . . . . . . . . 165
Jiffy Clips ....................145
KX (Bat Wing) . . . . . . . . . . . . . . . . . 160
Lay-in & Troffer Pipe Support Clips 163
Minerallac® Malleable Beam Clamp . . 138
Mounting Bracket for any
Electrical Box . . . . . . . . . . . . . . . 158
Multi-Flange Rod Hanger. . . . . . . . . 157
One Piece Strut Clamp . . . . . . . . . . 162
Pipe Sleeve Positioner . . . . . . . . . . 145
Pyramid . . . . . . . . . . . . . 155, 238-241
Ridgid Pipe Clamp . . . . . . . . . . . . . 162
Rod Lock ....................127
Screw Box Bracket for Between Studs 158
Slip-On Nut . . . . . . . . . . . . . . . . . . 173
Snap-on Fixture / Box Hanger . . . . . 163
Speed Link . . . . . . . . . . . . . . . 168, 235
Strap Hanger Clips . . . . . . . . . . . . . 165
T-Grid Box Hanger . . . . . . . . . . . . . 163
Toggles......................168
Two-Hole Conduit Straps. . . . . . . . . 145
Wire Hangers . . . . . . . . . . . . . . . . . 160
CADWELD® MOLDS . . . . . . . . . . 503-505
Cadweld™ Plus . . . . . . . . . . . . 503-505
Weld Metal - Traditional . . . . . . . . . 505
CALK-IN™......................105
CAM & GROOVE QUICK LOCK ADAPTER
.........................560
CANVAS TOOL BAGS . . . . . . . . . 457-458
CARABINERS . . . . . . . . . . . . . . . 603-606
CARBIDE BITS . . . . . . . . . . 317-323, 327
CARBIDE BURRS . . . . . . . . . . . . . . . . 482
CARBIDE CORE BITS . . . . . . . . . . . . . 327
CARBIDE SAW BLADES. . . . . . . . . . . . 357
CARBIDE TIPPED BITS . . . . . . . . 326-327
CARBIDE TIPPED HOLE CUTTERS . . . . . 302
CARBIDE TIPPED HOLE SAWS . . . . . . 308
CARPENTER PENCILS . . . . . . . . . . . . . 542
CARPENTER SQUARE . . . . . . . . . . . . . 445
CARPET SHIELD® ..............539
CARR LANE®...................585
CARRIAGE SCREWS (BOLTS). . . . . . . . . 26
CARRIER SUPPORTS . . . . . . . . . . . . . 216
CARTRIDGE ROLLS / MANDRELS 481-482
CARTRIDGES, RESPIRATORY. . . . . . . . 613
CARTS . . . . . . . . . . . . . . . . 547-548, 567
CASTER SETS . . . . . . . . . . . . . . . 532-534
CAT-CM CABLE SUPPORT SYSTEM . . . 164
CAULK, FIRESTOP . . . . . . . . . . . 490-502
CAULK, SILICONE. . . . . . . . . . . . . . . . 544
CAULK IN ANCHORS . . . . . . . . . . . . . 105
CAULKING GUNS . . . . . . . . . . . . 544, 591
CAUTION SIGNS . . . . . . . . . . . . 625-626
CAUTION TAPE . . . . . . . . . . . . . . . . . 628
CEILING CLIP ASSEMBLIES. . . . . . . . . . . .
. . . . . . . . . . . . . 113, 115, 122, 124
CEILING HANGER WIRE . . . . . . . . . . . 124
CEMENT BOARD SCREWS . . . . . . . . . . . 8
CEMENT
Construction . . . . . . . . . . . . . . . . 566
Leak-Stopper . . . . . . . . . . . . . . . 566
Mix.......................566
Non-Shrink Grout . . . . . . . . . . . . 566
CENDREX ACCESS DOORS . . . . 512-521
CENTER LOAD BEAM CLAMPS . . . . . . 196
CENTER NUTS ..................479
CEP
Cart Lights ...................528
GFCI ...................527, 591
Incandescent Light Bulb . . . . . . . . . 530
Light Strings . . . . . . . . . . . . . . . . . . 528
Metal Halide Lights . . . . . . . . . . . . . 528
Portable Power Center . . . . . . . . . . 531
Portable Quartz Floodlights. . . . . . . 528
Quartz & Metal Halide Light Bulbs
.....................528, 530
Utility Light. . . . . . . . . . . . . . . . . . . 528
CHAIN & ACCESSORIES . . . . . . . 574-575
CHAIN HOISTS . . . . . . . . . . . . . . 576-578
CHAIN SLINGS..................579
CHAIN WRENCH. . . . . . . . . . . . . . . . . 442
CHAIN VISES ...................424
CHALK LINE REELS/ REFILLS . . . . . . . 446
CHAMPION CUTTING TOOLS
Aircraft Drill Bits . . . . . . . . . . . . . . . 299
Carbon Steel Taps. . . . . . . . . . . . . . 301
Cobalt Drill Bits . . . . . . . . . . . . . . . 299
Cobalt S&D Drill Bits - 1/2” Shank. . . 299
Double End Drill Bits. . . . . . . . . . . . 300
Drill Bit Sets . . . . . . . . . . . . . . . . . . 297
Fractional Drill Bits . . . . . . . . . . . . . 299
Letter Size Drill Bits . . . . . . . . . . . . 299
Number Size Drill Bits. . . . . . . . . . . 299
Reduced Shank Drill Bits. . . . . . . . . 300
RotoBrute® Carbide Tipped Hole Saws 302
Silver & Deming Drills - 1/2” Shank 299
Stub Length Drill Bits . . . . . . . . . . . 300
Taps.................... 300-301
CHANNEL ............... see STRUT
Assembly - “Strong Back” . . . . . . . 208
Fittings . . . . . . . . . . . . . . 127, 137-168
643
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX C - D
c (continued)
CHANNEL . . . . . . . . . . . . . . . (continued)
Iron ........................208
Nuts....................127, 134
Strut Sizes ...................128
CHANNELLOCK.................457
CHARGER - MULTI-BAY . . . . . . . . . . . 252
CHARGERS - LI-ION/NICAD . . . . 290-291
CHEM-STUD EPOXY ANCHORS. . . . . . . 76
INSTALLATION TOOL . . . . . . . . . . . . 76
CHEMICAL SPILL PADS, BOOMS . . . . 558
CHEMICAL SPRAYER . . . . . . . . . . . . . 569
CHICAGO MECHANICAL BENDER . . . . 361
CHIP BRUSH . . . . . . . . . . . 487, 545, 591
CHIPPING & DEMOLITION HAMMERS
. . . . . . . . . . . . . . . . . 320, 324-328
COATED GLOVES . . . . . . . . . . . . . . . . 617
CONSTRUCTION SIGNS . . . . . . . . . . . 625
CHOP SAWS. . . . . . . . . . . . . . . . 358-359
CHOP SAW WHEELS. . . . . . . . . . 359, 464
CIP - CERTIFIED INSULATED PRODUCTS
ARC Protective Clothing . . . . . 620-622
Electrician’s Service Pouch . . . 620-622
Flash Apparel Protection . . . . 620-622
Flash Protection Arc Shields . . 620-622
High Voltage Glove Kits . . . . . . 620-622
Meter Service Belt Pouch . . . . 620-622
Type I Insulating Blankets . . . . 620-622
CIRCULAR SAWS see DeWalt, Milwaukee
CLAMP-ON METERS. . . . . . 272, 402-405
CLAMPS
"C" Clamps . . . . . . . . . . . . . . . 587-588
Beam Clamps . . . . . 138, 221, 188, 197
Cushion Clamps . . . . . . . . . . . 141-142
EMT Clamps..................140
Pipe Clamps . . . . . . . . . . . . . . 140-145
Purlin Clamps . . . . . . . . . . . . . . . . . 189
Riser Clamps . . . . . . . . . . . . . . . . . 185
Strut Clamps. . . . . . . . . . . . . . 139-165
Welding Clamps . . . . . . . . . . . . . . . 456
CLASSIC BENDER NO. 555C . . . . . . . 363
CLEAN ROOM RATCHET SHEARS . . . . 422
CLEAN ROOM TACKY MATS . . . . . . . . 556
CLEANERS . . . . . . . . . . . . . . . . . 554-555
CLEVIS GRAB HOOKS. . . . . . . . . . . . . 575
CLEVIS HANGERS. . . . . . . . . . . . 185-187
With Welded Shield . . . . . . . . . . . . 187
CLEVIS ROLLER HANGERS . . . . . . . . . 190
CLEVIS SLIP HOOKS. . . . . . . . . . . . . . 575
CLIC .........................143
CLIPS, STRUT. . . . . . . . . . . . . . . 140-145
"66" Clip (Weld Beam Attach) . . . . . 197
CLOSURE (STRUT) STRIP . . . . . . . . . . 133
CM ............................
Puller................... 576-578
Series 633 Wide Range Trolley 576-578
CZ92 Universal Plate Clamps. . 576-578
Hand Chain Hoist . . . . . . . . . . 576-578
Lodestar Electric Chain Hoist. . 576-578
Hoists................... 576-578
COACH SCREW HANGER BOLTS. . 51, 217
COBALT DRILL BITS . . . . . . . . . . . . . . 299
COIL THREAD NUTS . . . . . . . . . . . 33, 171
COIL THREAD ROD . . . . . . . . . . . . . . 171
COLD WEATHER EXTENSION CORD
.....................527, 591
COLD WEATHER SUPPLIES. . . . . 614-618
COLLARS, FIRESTOP . . . . . . . . . . . . . 492
COLORADO JIM CABLE SUPPORT . . . 158
COMBINATION LOCKS . . . . . . . . . . . . 537
COMBO
Drill/Tap Bit - Greenlee . . . . . . . . . . 301
Screwdriver Set - 7-Piece . . . . . . . . 455
COMBO . . . . . . . . . . . . . . . . . (continued)
Squares .....................445
Wrenches . . . . . . . . . . . . . . . . 452-455
COME-ALONGS . . . . . . . . . . . . . . . . . 580
COMMERCIAL INDUSTRIAL HOSE
..................... 560-561
COMPACT RATCHET CABLE CUTTER . . . . 394
COMPACT BAND SAW . . . . . . . . . . . 261, 352
COMPRESSED AIR . . . . . . . . . . . . . . . 555
COMPRESSORS.................450
CONCRETE
Clevis Plate...................199
Curing Blankets. . . . . . . . . . . . . . . . 530
Insert Boxes . . . . . . . . . . . . . . . . . . 199
Insert Strut...................133
Inserts ......................199
Lug Plate ....................199
Rod Attachment Plate . . . . . . . . . . . 199
SAKRETE ....................566
Vibrator .....................282
CONDRIVE (TAPCON TOOL) . . . . . . . . 100
CONDUIT & PIPE STORAGE RACK . . . 388
CONDUIT
Benders . . . . . . . . . . . . . . . . . 361-367
Clamps & Clips . . . . . . . . . . . . 139-141
Clip Assemblies. . . . . . . . 113, 122-124
Hanger......................160
CONES, TRAFFIC . . . . . . . . . . . . . . . . 628
CONFINED SPACE 3-WAY SYSTEM . . . 606
CONNECTING LINKS . . . . . . . . . . . . . 575
CONSTANT SUPPORTS. . . . . . . . . . . . 204
CONSTRUCTION GROUT . . . . . . . . . . 566
CONTINUOUS CONCRETE INSERT 133, 199
CONTRACTOR
Lifts ........................428
Trash Bags . . . . . . . . . . . . . . . 549, 592
Wheelbarrows. . . . . . . . . . . . . . . . . 566
Work Centers . . . . . . . . . . . . . 533-535
CONVOLUTE WHEELS . . . . . . . . . . . . 480
COOLERS......................561
COPE CABLE TRAY. . . . . . . . . . . 146-149
COPPER NATICK HANGERS . . . . . . . . 219
COPPER VAN HANGER (BELL TYPE) . . 219
COPPER TUBING CUTTER, M12 . . . . . 269
CORDED TOOLS. . see DeWalt & Milwaukee
CORDLESS TOOLS see DeWalt & Milwaukee
CORE BITS, CARBIDE . . . . . . . . . . . . . 327
CORE BITS, DIAMOND . . . . . . . . 335, 338
CORE RIGS . . . . . . . . . . . . . . . . 335-338
CORN BROOM..................551
CORPORATION EYE BOLTS
(TIE BOLT) . . . . . . . . . . . . . . . . 52, 243
CORTEN T-HEAD BOLTS . . . . . . . 52, 243
COTTER PINS ...................58
COTTON GLOVES . . . . . . . . . . . . . . . . 616
COUNTER BRUSHES . . . . . . . . . . . . . 552
COUNTERSUNK FINISH WASHERS 39, 55
COUPLING NUTS . . . . . . . . . . . . . . . . 33
COVER, HOLE-IN-ONE . . . . . . . . 331, 540
COVERALLS ....................619
CRACKED CONCRETE APPROVED
ANCHORS . . . . . . . . 68-75, 80, 91, 98
CRAYONS, LUMBER . . . . . . . . . . . . . . 542
CRC
2-26 Multi-Purpose Lubricant . . . . . 555
Compressed Air . . . . . . . . . . . . . . . 555
Cutting Oil ...................555
Hand Cleaner with Pumice . . . . . . . 554
Heavy Duty Degreaser . . . . . . . . . . 554
Hydroforce All Purpose Cleaner. . . . 554
Screwloose...................555
Sunswipe™ Sunscreen Towelette . . . 554
Wasp & Hornet Killer Plus. . . . . . . . 555
CRESCENT WRENCHES . . . . . . . . . . . 453
CRICKET.......................388
CRIMPED WIRE
Cup Brushes..................486
End Brushes . . . . . . . . . . . . . . 485, 487
Wheel Brushes - 4” Diameter . 483, 485
Wheels for Small Grinders. . . . . . . . 487
CRIMPING TOOLS . . . . . . . 397, 399-400
CROSS-ARM STRAP . . . . . . . . . . 601, 604
CROWBAR.....................444
CUPS, DRINKING . . . . . . . . . . . . . . . . 561
CUP BRUSHES..................486
CURBS, ROOFTOP SUPPORTS . . 236-242
CURED CONCRETE WET BLADES . . . . 331
CURING BLANKETS . . . . . . . . . . . . . . 530
CURRENT TOOL . . . . . . . . . .367-368
Benders .....................367
Cable Pullers . . . . . . . . . . . . . . . . . 368
Knockout Punch & Die sets . . . . . . . 368
CURVED HANDLE SCRATCH BRUSH . . 467
CUSH-A-CLAMP® HYDRAZORB . . . . 141
CUSH-A-CLAW STRUT CLAMP. . . . . . . 144
CUSH-A-STRIP..................140
CUSTOM FABRICATION . . . . . . . . . . . 208
CUT END MOPS . . . . . . . . . . . . . . . . . 550
CUT-OFF WHEELS . . . . . . . . . . . 463-465
CUT-OUT TOOL . . . . . . . . . . . . . . . . . 282
CUTTING LUBRICANTS . . . . . . . . . . . . 598
CUTTING OIL...................407
CUTTING TOOLS - BITS . . . see Champion
CUTTING WHEELS . . . 269, 421, 461-464
CYLINDER CARTS . . . . . . . . . . . . . . . . 547
d
D-HANDLE SHOVELS . . . . . . . . . . . . . 564
D-RING EXPANDER . . . . . . . . . . . . . . 600
DANGER SIGNS . . . . . . . . . . . . . 625-626
DANGER TAPES . . . . . . . . . . . . . . . . . 628
DEBURRING TOOL . . . . . . . . . . . . . . . 374
DECK SCREWS....................6
DECK SCRUB BRUSH . . . . . . . . . . . . . 552
DEEP CUT ELECTRIC BAND SAWS 352-353
DEEP STRUT ...................131
DEGREASERS...................554
DEKTITE™ PIPE FLASHINGS . . . . . . . . 244
DEMOLITION BLADES . . . . . . . . 248, 349
DEMOLITION HAMMERS. . . 320-324, 328
DEPRESSED CENTER GRINDING WHEELS 460
DESIGN, PIPE HANGERS, STRUT
. . . . . . . . . . . . . . . . .Preface B, 208
DEWALT
14” Chop Saw . . . . . . . . . . . . . . . . 359
14” Multi-Cutter™ Dry Cut Saw . . . . 358
36V NANO™ Li-Ion Cordless Tools .247-248
4-1/2” Small Angle Grinder . . . 340-341
Battery Packs . . . . . . . . . . . . . 290-291
Chargers. . . . . . . . . . . . . . . . . 290-291
Compressors..................450
Corded Tools. . . . . . . . . . . . .293-297
Close Quarter Drills. . . . . . . . . . . 297
Demolition Hammer . . . . . . . . . . 328
Drills.................. 291-293
Impact wrenches . . . . . . . . . . . . . 316
Pistol Grip Drills . . . . . . . . . 292-293
Right Angle Drills. . . . . . . . . 295-296
Rotary Hammers, SDS. . . . . 318-320
Rotary Hammers, SDS-MAX. 324-325
Rotary Hammers, Spline . . . . . . . 325
Spade Handle Drills. . . . . . . . . . . 294
Cordless Tools. . . . . . . . . . . . 246-290
Li-Ion
12V Max™ Sub-Compact . . . 275-276
18V NANO™ ............ 264-266
28V NANO™ ............ 253-254
36V NANO™ ............ 247-248
644 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX D - F
d (continued)
DEWALT . . . . . . . . . . . . . . (continued)
NiCd
12V NiCd ..................287
14.4V XRP™ NiCd . . . . . . . . 285-286
18V XRP™ NiCd . . . . . . . . . . 281-284
24V NiCd ..................277
7.2V NiCd..................288
9.6V NiCd..................288
Circular Saw . . . . . . . . . . . . . . . . . . 254
Cut-Out Tool. . . . . . . . . . . . . . . . . . 282
Deck / Drywall Screwdriver . . . . . . . 314
Deep Cut Variable Speed Band Saw 353
Demolition Hammers. . . . . . . . 320-328
Die Grinder...................339
Drills
Close Quarter Drills. . . . . . . . . . . 297
Pistol Grip Drills . . . . . . . . . 292-293
Right Angle Drills. . . . . . . . . . . . . 295
Spade Handle Drills. . . . . . . . . . . 294
Generators...................450
Grinders . . . . . . . . . . . . . . . . . 340-344
Impact Wrenches . . . . . . . . . . . . . . 316
Jig Saw. . . . . . . . . . . . . . . . . . 261, 345
Laser Levels . . . . . . . . . . . . . . . . . . 447
Lights/Radios . . . . . . . . . . . . . . . . . 284
Pilot Point® Gold Twist Drill Bits . . . . 297
Reciprocating Saw . . . . . . . . . . . . . 346
Rotary Hammers, SDS . . . 87, 318-320
Rotary Hammers, SDS-MAX . . . . . . 324
Rotary Hammers, Spline . . . . . . . . . 325
Storage Chests . . . . . . . . . . . . . . . . 536
DIAMOND CORE BITS . . . . . . . . 335, 338
DIAMOND CORING MOTORS / RIGS
& ACCESSORIES. . . . . . . . . . . 335-338
DIAMOND 4-WAY SAFETY PLATE . . . . 208
DIAMOND PRODUCTS
Concrete Blades . . . . . . . 331, 466-467
Dry Diamond Core Bits . . . . . . . . . . 335
Dry Tuck Pointing Blades . . . . . . . . 466
Impregnated Yellow Core bits . . . . . 335
Lion GP Diamond Blades . . . . . . . . . 466
M-4 Drill Rig Hand Held Core Motor 335
Multi-Purpose Contractors Blades . . 466
Tiger Tuck Pointing Diamond Blades . . . .466
Premium Black Core bits. . . . . . . . . 335
Segmented Dry High Speed Blades. . 331
SpeediCut Gas Saw. . . . . . . . . . . . . 331
WEKA Hand Held Core Drill . . . . . . 338
DIAPHRAGM PUMPS . . . . . . . . . . . . . 559
DIE HEADS / DIE HEAD RACKS . . 412-413
DIELESS CRIMPER . . . . . . . . . . . . . . . 399
DIESEL FUEL CANS . . . . . . . . . . . . . . 563
DIGGING BARS . . . . . . . . . . . . . . . . . 565
DIGITAL ELECTRICAL TESTER . . . 403-405
DIGITAL MULTIMETER . . . . . . . . 403-404
DIKES . . . . . . . . . . . . . . . . 390-391, 558
DISCHARGE HOSE . . . . . . . . . . . . . . . 560
DISPOSABLE CLOTHING . . . . . . . . . . 619
DISPOSABLE GLOVES . . . . . . . . . . . . 617
DISPOSABLE RESPIRATORS . . . . . . . . 612
DOUBLE END DRILL BITS. . . . . . . . . . 300
DOUBLE END STUDS . . . . . . . . . 175, 177
DOUBLE ROD ROLLERS . . . . . . . . . . . 190
DOWEL PINS....................58
DRAIN CLEANERS . . . . . . . . . . . . . . . 441
DRAIN & SEWER INSPECTION . . 430-436
DRAW STUDS FOR KNOCKOUTS 372-373
DRIFT FENCE...................566
DRILL & TAP SIZES . . . . . . . . . . . . . . 300
DRILLS. . . . . . . . see DeWalt & Milwaukee
DRILL BITS
see High Speed, Champion & Carbide
Flat Boring, Spade . . . . . . . . . . . . . 298
DRILL BITS. . . . . . . . . . . . . . . (continued)
Auger/Nail-Eaters . . . . . . . . . . . . . . 309
VariBit/Step/UniBit . . . . . . . . . . . . . 303
DRIVE EXTENSION . . . . . . . . . . . . . . . 453
DRIVE PINS 113, 114, 116, 117, 121-122
DRIVE SCREWS . . . . . . . . . . . . . . . . . 217
DRIVER / DRILLS see DeWalt & Milwaukee
DRIVERS’ GLOVES . . . . . . . . . . . . . . . 615
DROP-IN ANCHORS . . . . . . . . 90-92, 105
Bits (Stop-Bit). . . . . . . . . . . . . . 92 322
Setting Tool . . . . . . . . . . . . 90, 92, 105
DROP LIGHTS ..................527
DRUM TOP PADS. . . . . . . . . . . . . . . . 558
DRY CUT METAL BLADES . . . . . . . . . . 357
DRY CUT SAWS . . . . . . . . . . . . . . . . . 358
DRY DIAMOND CORE BITS. . . . . 335, 338
DRY TUCK POINTING BLADES . . . . . . 466
DRY TURBO BLADES . . . . . . . . . . . . . 466
DRYWALL SCREWDRIVER . . . . . . 313-314
DRYWALL SCREWS . . . . . . . . . see Screws
DUC LUG WASHERS. . . . . . . . 39, 52, 243
DUCT COVERS..................539
DUCT LIFTS ....................546
DUCT SPACERS . . . . . . . . . . . . . . . . . 153
DUCT TAPE ................541, 592
DURA-BLOCK, B-LINE . . 155, 236-237
DURACELL® PROCELL® BATTERIES. . . 530
DURA-WEB NYLON SLINGS . . . . 581-582
DUST PANS ....................551
CEMENT BOARD SCREWS . . . . . . . . . . . 8
DUST SHIELD™ ADJUSTABLE POLES . . . 538
DVD/VIDEO RECORDER . . . . . . . 430-433
DYMO DRILLS . . . . . . . . . . see Core Rigs
DYNABOLT SLEEVE ANCHORS . . . . . . . 85
e
E-Z PADS (VIBRATION ISOLATION)
.........................230
E-Z PATH FIRESTOPPING . . . . . . 498-499
EAGLE TYPE I SAFETY CANS . . . . . . . 563
EARMUFFS. . . . . . . . . . . . . . . . . 607, 610
EARPLUGS.....................607
ELECTRIC CHAIN HOISTS . . . . . . . . . . 578
ELECTRIC PUMPS. . . . . . . . . . . . . . . . 559
ELECTRICAL
Box Mounting Bracket . . . . . . 158-159
Extension Cords . . . . . . . . . . . 527, 591
Power distribution . . . . . . . . . . . . . 531
Protective Clothing . . . . . . . . . 620-622
Tape (Black, Colors, Phase) . . . . . . . 541
Testers.................. 401-406
ELECTRICIAN’S SERVICE POUCH . . . . 458
ELECTROMAGNETIC DRILL PRESSES
DRILL MOTORS & BASES . . . . 332-333
ELEVATOR BOLTS..................7
ELONGATED CLEVIS HANGER. . . . . . . 187
EMPIRE................see Hangers
EMT STRAPS ...................148
EMLOK SPRINKLER RING . . . . . . . . . . 221
END BRUSHES - CRIMPED WIRE 485-487
END CAPS, STRUT . . . . . . . . . . . . . . . 138
END PIPE WRENCH . . . . . . . . . . . . . . 442
ENGINEERING .....................
Pipe Hangers, . . . . . . Preface B, 205-206
Hangers . . . . . . . . . . . . . . . . . 205-206
Strut Systems . . . . . . Preface B, 205-206
Supports . . . . . . . . Preface B, 205-206
Technical Services . . . . . . . . . . 205-206
ENTRANCE MATS . . . . . . . . . . . . 539, 556
EPCON®
A7 Acrylic Adhesive.............77
Adhesive Accessories - Hole Plugs,
Brushes & Extension Tubing . . . . 74-80
Adhesive Anchors . . . . . . . . . . . . 74-81
EPCON®............... (continued)
At-a-Glance. . . . . . . . . . . . . . . . . 66-67
C6 Epoxy Adhesive . . . . . . . . . . . . 78
G5 Epoxy Adhesive . . . . . . . . . . . . 77
Nylon Screens. . . . . . . . . . . . . . . . . . 76
Stainless Steel Screens . . . . . . . . . . . 76
Stubby Screens. . . . . . . . . . . . . . . . . 76
Umbrella Inserts . . . . . . . . . . . . . . . . 76
ERICO ...........see Caddy, Hangers
EXPANSION ANCHORS / SHIELDS . . . 104
EXTENDED PIPE CLAMPS . . . . . . . . . . 198
EXTENSION
Cords...................527, 591
Ladder ......................525
EYE & SKIN FLUSH STATIONS . . . . . . 618
EYE BOLTS. . . . . . . . . . . . . . . . . 569-570
EYE LAG SCREWS..................7
EYE ROD PLAIN/WELDED . . . . . . . . . . 219
EYE SOCKETS...................219
EYE TO EYE TURNBUCKLES . . . . . . . . 568
EYE WEAR . . . . . . . . . . . . . . . . . 608-609
EXO-THERMIC WELDING . . . . . . 503-505
EXTENSION PIECE . . . . . . . . . . . . . . . 219
EXIT SIGNS ....................626
EXPRESS, SAMMY'S . . . . . . . . . . . 96-97
E-Z PADS (VIBRATION ISOLATION)
.........................230
EZ REACH™ FISH STIX . . . . . . . . . . . . 376
F
F&M HANGER FLANGE WALL PLATE . . 217
F&M SPLIT RING HANGER (HINGE TYPE) 217
F438 STRUCTURAL FLAT WASHERS . . . 39
FABRICATION, PIPE HANGERS . . . . . . 206
FACESHIELDS...................610
FALL PROTECTION . . . . . . . . . . . 600-606
FALL PROTECTION KITS . . . . . . . 600, 602
FANS.........................562
FASTENER I.D. GUIDES . . . . . . . . . 11, 17
FASTENERS ..................1-64
Gas & Powder Actuated . . . . . 111-124
FATIGUE MATTING . . . . . . . . . . . . . . . 567
FATMAX® BY STANLEY . . . . . . . . 443-446
FENCE POSTS ..................566
FENCING . . . . . . . . . . . . . . 566-567, 594
FENDER WASHERS. . . . . . . . . . . . . 36, 39
FIBER CEMENT BOARD SCREWS . . . . . . 8
FIBER DISCS - ALUMINUM OXIDE . . 478
FIBERGLASS
Cable Tray ...................147
Extension Ladder. . . . . . . . . . . . . . . . . 525
Step Ladder . . . . . . . . . . . . . . . . . . 524
Strut System. . . . . . . . . . . . . . 150-151
Threaded Rod. . . . . . . . . . . . . . . . . 151
FIELD OFFICE STORAGE . . . . . . . 532-536
FILTERS, RESPIRATORY . . . . . . . . . . . 613
FILTERS, VACUUM . . . . . . . . . . . . . . . 537
FIRE EXTINGUISHERS . . . . . . . . . . . . 627
FIRE EXTINGUISHER SIGNS . . . . . . . . 626
FIRE RATED ACCESS DOORS
. . . . . . . . . . . . . 509, 516, 517-518
FIRESTOP . . . . . . . . . . . . . . . 490-502
Bags........................502
Cast-In Place Sleeves . . . 231, 494-495
Coatings . . . . . . . . . . . . . . . . . 490-502
Collars ......................492
Mortar ..................497, 501
Pillows . . . . . . . . . . . . . . . . . . 493, 502
Putties ......................493
Putty Pads ...................493
Sealants . . . . . . . . . . . . . . . . . 490-502
FIRST AID KITS. . . . . . . . . . . . . . . . . . 618
FISH LINE .....................376
645
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX F- H
F (continued)
FISH PLATES . . . . . . . . . . . . . . . 178, 217
FISH POLES - GREENLEE..........376
FISH TAPES / RODS / LINE . . . . . . . . . 375
FIXED PIPE SADDLE SUPPORT . . . . . . 195
FLAMESAFE® . . . . . . . . . . . see Firestop
FLANGE BOLTS - A307B HEAVY HEX . . 23
FLANGE NUTS - SERRATED . . . . . . . . . 32
FLANGE PINS...................427
FLAP DISCS . . . . . . . . . . . . . . . 468-469
FLAP WHEELS . . . . . . . . . . . . . . 469-470
FLASH PROTECTION . . . . . . . . . 620-622
FLASHLIGHTS. . . . . . . . 262-263,289, 529
FLAT BORING BITS & EXTENSIONS . . 298
FLAT TOP CLEVIS HANGER . . . . . . . . . 185
FLAT WASHERS
Brass ........................54
Grade 8 Yellow Zinc . . . . . . . . . . . . . 36
Machine Screw . . . . . . . . . . . . . . . . 39
Stainless Steel USS . . . . . . . . . . . . . 39
USS - SAE - Dimensional Info . . . . . . 37
USS - SAE - Fender. . . . . . . . . . . . . . 36
FLEX SPLITTER® BX & FLEXIBLE
CONDUIT CUTTER . . . . . . . . . . . . . 392
FLEX-BASKET TRAY. . . . . . . . . . . . . . . 147
FLIP TOP® BENDERS NO. 882 . . . . . . 364
FLOOR FAN - INDUSTRIAL . . . . . . . . 562
FLOOR SHIELD . . . . . . . . . . . . . . . . . 539
FLOOR SQUEEGEE . . . . . . . . . . . . . . . 552
FLOORBOARD TORX® SCREWS . . . . . . . 4
FOAM, EXPANDING . . . . . . . . . . . . . . . 81
FOIL TAPE . . . . . . . . . . . . . . . . . 542, 592
FOOT PUMP - HYDRAULIC . . . . . . . . 371
FORCE GAUGE..................382
FORGED
Clevises . . . . . . . . . . . . . . . . . 219, 569
Eye Bolts ....................569
Wire Rope Clips Galvanized. . . . . . . 189
FOUNDATION BOLT . . . . . . . . . . . . . . 176
FOUR-WHEEL PIPE CUTTERS . . . . . . . 417
FOUR-WHEEL TROLLEY . . . . . . . . . . . 139
FRAMER SCREWS (BLACKIE) . . . . . . . . . 4
FRICTION CLAMP. . . . . . . . . . . . 185, 218
F-SERIES VISES . . . . . . . . . . . . . . . . . 586
g
G5 EPOXY ADHESIVE . . . . . . . . . . . . 79
GARBAGE CANS, BAGS . . . . . . . 549, 592
GARDEN HOSE . . . . . . . . . . . . . . . . . 561
GARDEN RAKE . . . . . . . . . . . . . . 565, 593
GAS CANS . . . . . . . . . . . . . . . . . 563, 595
GAS FASTENING SYSTEMS . . . . . 111-117
GAS PUMPS....................559
GAS SAW - CUT-OFF WHEELS. . . . . . . 331
GAS SAWS.....................331
GAS TOOLS . . . . . . . . . . . . . . . . 111-117
GASKETS .......................23
GATOR™ BATTERY TOOLS . . . . . . 395-397
GATORADE ....................561
GEARED THREADERS . . . . . . . . . . . . 412
GENERATORS...................450
GENIE LIFT (see Sumner). . . . . . 546-547
GFCI .....................527, 591
GIRDER GRIP...................604
GLASS CLEANER . . . . . . . . . . . . . . . . 554
GLASSES, SAFETY . . . . . . . . . . . 608-609
GLOVES................... 614-617
GOGGLES......................609
GRAB HOOKS ..................575
GRADE 70 TRANSPORT CHAIN. . . . . . 574
GRASSHOPPER™ ................427
GRAY WOLF™ 5012 HACKSAW FRAME 353
GREEN CONCRETE WET BLADES . . . . 331
GREEN GROUND SCREWS . . . . . . . . . 51
GREENLEE
Automatic Electrical Tester . . . 404-405
Battery Powered Crimpers . . . 397-399
Basket Type Pulling Grip Sets . . . . . 384
Battery Powered Cable Cutter . 395-396
Benders, 555, 881 . . . . . . . . 361-364
Bending Table. . . . . . . . . . . . . . . . . 364
Buried Line Locator. . . . . . . . . 405-406
Bushings for Metal Stud Punches . . 374
Cable Cutter . . . . . . . . . . . . . . 393-396
Cable Feeder . . . . . . . . . . . . . . . . . 382
Cable Pullers . . . . . . . . . . . . . 378-382
Cable Pulling Lubricant . . . . . . . . . . 385
Cable Tray Cutter . . . . . . . . . . . . . . 396
Chicago Bender . . . . . . . . . . . . . . . 361
Compact Ratchet Cable Cutter 394-395
Conduit & Pipe Storage Rack . 386-388
Conduit Measuring Tape . . . . . . . . . 376
Crimpers. . . . . . . . . . . . . . . . . 397-399
Digital Electrical Testers . . . . . 403-406
Digital Multimeter . . . . . . . . . . 404-405
Double Braided Composite Rope . . 384
Draw Studs. . . . . . . . . . . . . . . . . . 372-373
D'Versabit . . . . . . . . . . . . . . . . . . . . . . . 310
Electric Conduit Bender No. 555® 362-363
Electric Hydraulic Pump . . . . . . . . . 365
EZ Reach™ Fish Stix . . . . . . . . . . . . 376
Fish Line.....................376
Fish Poles....................376
Fish Tapes ...................375
Flex Splitter® BX & Flexible
Conduit Cutter . . . . . . . . . . . . . . 392
Flip Top® Benders No. 882 . . . . . . . 364
Force Gauge..................382
Gator™ Battery Tools . . . . . . . 395-399
Hand Caddy - No. 9502 . . . . . . . . . 386
Hand-Powered Hydraulic HCCX Tool. . 398
Hickeys with Welded Handles . . . . . 361
Hook Sheaves. . . . . . . . . . . . . . . . . 383
Hydraulic Benders. . . . . . . . . . 362-363
Hydraulic Pumps. . . . . . . . . . . 365, 371
Hydraulic Hose Units . . . . . . . . . . . 365
Hydraulic Oil. . . . . . . . . . . . . . . . . . 366
Hydraulic Punch Kits . . . . . . . . 370-371
Li’L Fisher™ Power Fishing System . . 377
Lube Spreader Swab. . . . . . . . . . . . 385
Magnetic Bubble Level . . . . . . . . . . 366
Manual Knockout Punch Kits . . . . . . 370
Metal Stud Punches . . . . . . . . . . . . 374
Multiplex Cable Pulling Rope . . . . . 384
Nail Eater II® Power Bits . . . . . . . . . 309
No. 881 Cam Track® Conduit Benders 364
Nylon Fish Tapes. . . . . . . . . . . . . . . 375
Pipe Cart ....................388
Plumber Stud Punch . . . . . . . . . . . . 374
Poly Line ....................376
Polyester Measure / Pulling Tapes . . 376
Portable Blower Power Fishing System 377
Power Finder Circuit Seeker™. . . . . 405
Pullers . . . . . . . . . . . . . . . . . . 378-381
Pulling Grip. . . . . . . . . . . . . . . 383-384
Pulling Rope . . . . . . . . . . . . . . . . . . 384
PVC Cutter ...................392
PVC Heating Blanket . . . . . . . . . . . . 366
PVC Plug Set . . . . . . . . . . . . . . . . . 366
Quad Bender™ 853, 854, 855 362-363
Ratchet ACSR / Cable Cutter . . . . . . 395
Ratchet Cable Cutter. . . . . . . . 395-396
Ratchet Punch Driver . . . . . . . . . . . 370
Ratchet Type Reel Stands . . . . . . . . 385
Reel Stands . . . . . . . . . . . . . . 385-387
Rope Clevis...................383
GREENLEE . . . . . . . . . . . . (continued)
Rope Stands..................384
Screw Type Reel Stands . . . . . . . . . 385
Set Screw Clamp Pulling Grips. . . . . 383
Sheaves .....................383
Site-Rite® Hand Benders . . . . . . . . . 361
Slug-Buster® Hydraulic Driver Kits 370-371
Smart Bender 855 . . . . . . . . . . . . . 362
Standard Knockout Punch Kits 370-371
Steel Fish Tapes . . . . . . . . . . . . . . . 375
Super Tugger® Cable Puller . . . . . . 380
Test Instruments . . . . . . . . . . . 404-406
Ultra Cable Feeder Model No. 6810 382
Ultra Glider...................382
Ultra Tugger® 640/6021 Adapter 380-381
Ultra Tugger™ Speed Booster . . . . . 382
Vacuum / Blower Power Fishing System 377
Wire Carts . . . . . . . . . . . . . . . 386-387
Wire Dispensers . . . . . . . . . . . 386-387
Wire Reel Support Frame . . . . . . . . 386
Storage Boxes . . . . . . . . . . . . 532-536
Voltage Testers . . . . . . . . . . . . 404-405
GRINDERS..............see DeWalt &
GRINDING WHEELS . . . . . . . . . . 460-462
GRINNELL ..........see Pipe Hangers
GRIPPLE . . . . . . . . . . .165-166, 232-233
GROUND FAULT CIRCUIT
INTERRUPTERS (GFCI) . . . . . . 527, 591
GROUNDING CONNECTIONS . . . 503-505
GROUNDING SCREWS . . . . . . . . . . . . . 51
H
HACKSAW BLADES. . . . . . . . . . . . . . . 353
HACKSAW FRAMES . . . . . . . . . . . . . . 353
HACKZALL® RECIP SAW . . . . . . . . . . . 270
Replacement Blades . . . . . . . . . . . . 270
HALF MASK RESPIRATORS. . . . . . . . . 613
HALOGEN, QUARTZ BULBS . . . . . . . . 530
HAMMER CAPSULE EPOXY ANCHORS. . . 76
HAMMER DRILLS . . . . . . . . . . . . 317-318
HAMMER IRON . . . . . . . . . . . . . 329-330
HAMMER-ON FLANGE CLIP . . . . . . . . 157
HAMMERS, HAND . . . . . . . . . . . . . . . 565
HAMMERS, ROTARY. see DeWalt, Milwaukee
HAND CHAIN HOIST . . . . . . . . . 576-577
HAND CLEANER . . . . . . . . . . . . 554-556
HAND HELD CORE DRILL, WEKA . . . . 338
HAND PUMP - HYDRAULIC . . . . . . . . 371
HAND TOOLS
. . . . . . 389-392, 442-446, 451-457
HAND TRUCKS . . . . . . . . . . . . . . . . . 567
HAND WINCH (MAN RATED) . . . . . . . 606
HAND-POWERED HYDRAULIC
HCCX TOOL ..................398
HANDY-SNAP...................144
HANGER BOLTS . . . . . . . . . . . . . . 51, 217
HANGERS - PIPE . . . . . . . . . .179-244
Beam Clamps . . . . . .188-189, 196-197
Clevis Hangers . . . . . . . . . . . . 186-187
Emlok Sprinkler Rings . . . . . . . . . . . 221
Flange / Wall Plate . . . . . . . . . . . . . 217
Hold-Rite . . . . . . . . . . . . . . . . 214-216
Pipe Saddles. . . . . . . . . . . . . . . . . . 191
Pipe Shields . . . . . . . . . . . . . . 186-187
Roller Hangers . . . . . . . . . . . . 190-191
Split Ring Hanger (Hinged) . . . . . . . 217
HANGERMATE . . . . .see Sammy / Vertigo
HANGER WIRE . . . . . . . . . . . . 123-124
Ceiling Wire . . . . . . . . . . . . . . . . . . 124
Clips.................... 123-124
J-Master Tool . . . . . . . . . . . . . . . . . 123
Preties ......................124
Rodman's Tie Wire . . . . . . . . . . . . . 124
U-Hank Wire..................124
646 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX H - L
H (continued)
HANGING SYSTEMS . . .165-168, 232-235
HARD HATS . . . . . . . . . . . . . . . . 610-611
HARNESS, SAFETY . . . . . . . . . . . 600-602
HAYDON STRUT ........... See Strut
HEAD PROTECTION
HARD HATS . . . . . . . . . . . . . . 610-611
WINTER LINERS . . . . . . . . . . . . . . . 618
HEARING PROTECTION . . . . . . . 607, 610
HEAT BLANKETS . . . . . . . . . . . . . . . . 366
HEAT GUNS....................360
HEATERS ......................530
HEAVY DUTY “DOUBLE” BOLT
PIPE CLAMPS . . . . . . . . . . . . . . . . . 198
HEAVY DUTY BEAM CLAMPS . . . . . . . 197
HEAVY DUTY DEGREASER. . . . . . . . . . 554
HEAVY DUTY PIPE CLAMPS . . . . . . . . 217
HEAVY DUTY PIPE CUTTERS . . . . 417-419
HEAVY DUTY RATCHET
CABLE CUTTER . . . . . . . . . . . . 393, 395
HEAVY HEX BOLTS, A307 GRADE B . . . 23
HEAVY HEX BOLTS, A193 B7 . . . . . . . . 24
HEAVY HEX BOLTS, A193 B8 & B8M . . 25
HEX NUTS .................see Nuts
HEAVY HEX NUT DIMENSIONS . . . . . . 31
HEAVY HEX NUTS. . . . . . . . . . . . . 31, 174
HEAVY NUTS, 2H, DH, DH3 . . . . . . 21, 31
HEAVY WELDED STEEL BRACKET . . . . 207
HELI-COIL SCREW THREAD INSERTS . . 56
HELICOPTER DECK INSERT. . . . . . . . . 199
HEX BOLTS .................. 22-29
HEX CAP SCREWS
Brass ........................53
Grades 2, 5 & 8 . . . . . . . . . . . . . 22, 27
Stainless Steel . . . . . . . . . . . . . . 28-29
HEX COUPLING NUT SLEEVE ANCHORS 84
HEX KEYS.......................58
HEX NUT SPECIFICATIONS . . . . . . . . . . 30
HEX SHANK BITS & HAMMER
ACCESSORIES . . . . . . . . . . . . 329-330
HEX TAP BOLTS - FULLY THREADED . . . 26
HI COLLAR LOCK WASHERS. . . . . . . . . 38
HI JACKS......................426
HICKEYS WITH WELDED HANDLES . . . 361
HIGH ACCESS RATCHETING
WRENCH SET.................454
HIGH HEX TEK SCREWS . . . . . . . . . . . . . 3
HIGH PRESSURE HYDRAULIC HAND
PUMP.......................371
HIGH SPEED CUT-OFF WHEELS FOR
PORTABLE SAWS . . . . . . . . . . . . . . 465
HIGH SPEED STEEL
(HSS) Annular Cutters . . . . . . . . . . . 334
Fractional Drill Bits . . . . . . . . . 299-300
Letter Size Drill Bits . . . . . . . . . . . . 299
Number Size Drill Bits. . . . . . . . . . . 299
Reduced Shank Drill Bits. . . . . . . . . 300
Stub Length Drill Bits . . . . . . . . . . . 300
Taps.................... 300-301
Twist Drill Bits . . . . . . . . . . . . 297-300
HIGH VOLTAGE
Glove Kits....................621
Protection. . . . . . . . . . . . . . . . 620-622
Tools .......................622
HIGH-HEX .......................3
HILTI® .................(see Powers)
HINGED CUTTERS . . . . . . . . . . . . . . . 417
HINGED SPLIT RING HANGERS . . . . . 217
HOISTS ................... 576-578
HOLDRITE®. . . . . . . . . . . . 144, 214-216
EZ Strut System (Silencer). . . . . . . . 144
"Mickey Mouse Ear" Clamps . . . . . . 215
Stout Brackets & Clamps . . . . 214-216
HOLE COVERS, HOLE-IN-ONE . . 335, 540
HOLE CUTTERS . . . . . . . . . 301-302, 312
HOLE CUTTERS, PIPE . . . . . . . . . . . . . 422
HOLE MASTER™ HOLE CUTTING BASE 422
HOLE-OUT (PLASTIC PIPE SLEEVES) . . 209
HOLE PLUGS . . . . . . . . . . . . . . . . . 75, 79
HOLE SAW ARBORS. . . . . . . . . . 305-307
HOLE SAWS / KITS . . . . . . . . . . . . . . . 304
HOLE-HAWG® DRILL..............296
HOLE-SHOOTERS, “D” HANDLE . . . . 296
HOLLOW SET DROP-IN . . . . 90, 105, 220
HOLLOW WALL
Adhesives Accessories. . . . . . . . . 74-81
Anchors . . . . . . . . . .106-110, 220-221
Wall Dogs....................107
Zip-Its ......................108
HOOK BOLTS...................176
HOOK SHEAVES . . . . . . . . . . . . . . . . . 383
HOOK TO EYE TURNBUCKLES . . . . . . 568
HOOK TO HOOK TURNBUCKLES . . . . 568
HOSE UNITS - HYDRAULIC . . . . . . . . 365
HOSE
Accessories. . . . . . . . . . . . . . . 560-561
Discharge....................560
Mill.........................560
Nozzles .....................560
Pressure Washer. . . . . . . . . . . . . . . 560
PVC ........................560
Quick Lock Adapter . . . . . . . . . . . . 560
Rubber......................560
Strainers.....................560
Suction......................560
Washers.....................560
Water................... 560-561
HOT BOX......................366
HOT DIP GALVANIZED NUTS . . . . . . . . 30
HOT TAPPING TOOL . . . . . . . . . . . . . 423
HOUGEN®
“12,000-Series” Cutters . . . . . . . . . 334
Portable Drills. . . . . . . . . . . . . 332-333
HUSKY™ CONTRACTOR TRASH BAGS
.....................549, 592
HVAC DUCT COVER FILM . . . . . . . . . . 539
HYBRID GAS/POWDER FASTENERS . . 122
HYDRAULIC
Benders . . . . . . . . . . . . . . . . . 363-364
Foot Pump No. 1725 . . . . . . . . . . . 371
Hand Pump No. 767. . . . . . . . . . . . 371
Hose Units ...................365
Oil .........................366
Punch Kits . . . . . . . . . . . . . . . 368-371
Roll Groover - Model 918 . . . . . . . 416
HYDRAZORB™ ................141
Cush-A-Clamp® - Hydrazorb /
Supertrut SNAP Guard® .........141
HYDROFLAME FIRESTOP INSERTS
.........................495
HYDRAULIC CEMENT . . . . . . . . . . . . . 566
i
I-BEAM CLAMP . . . . . . . . . 138, 196-197
ICE TONG BEAM CLAMP . . . . . . . . . . 196
IGLOO® WATER COOLERS . . . . . . . . . 561
IMPACT GUNS / WRENCHES. . . . . . . . 316
IMPACT SOCKETS . . . . . . . . . . . . . . . 452
INCANDESCENT LIGHT BULB . . . . . . . 530
INNERLYNX® / LINK SEALS
. . . . . . . . . . . . . .210-211, 522-523
IN-PLACE SOIL PIPE CUTTER . . . . . . . 419
INSERT BITS / HOLDERS . . . . . . . . . . 315
INTERNAL / EXTERNAL TOOTH
LOCK WASHERS . . . . . . . . . . . . . . . . 38
INTERNAL TUBE BRUSHES . . . . . . . . . 488
INTUMESCENT FIRESTOP. . . . . . 490-502
IPC FIRESTOP (GRACE) . . . . . .500-502
ISSB STRUT PLATE. . . . . . . . . . . . . . . 165
J
ISN SMART NUT. . . . . . . . . . . . . . . . . 165
ISOLATORS. . . . . . . . . . . . see Vibration
ITW-RAMSET® - POWDER
. . . . . . . . . . . . . .111-113, 119-124
ITW-RED HEAD®.....71, 83, 85, 89, 92
ITW-BUILDEX
Dektite™ Pipe Flashings . . . . . . . . . . 244
E-Z-Anchor, (see Zip-It) .........108
JACK HAMMERS . . . . . . . . . . . . . . . . 328
JACK STANDS . . . . . . . . . . . . . . 425-426
JAM NUT DIMENSIONS . . . . . . . . . . . . 32
JAW TO JAW TURNBUCKLES . . . . . . . 568
J-BOLT........................176
J-HANGER - SIDE LOCK . . . . . . . . . . . 218
J-HOOK - “RETURN” LINE . . . . . . . . . 218
J-HOOK STRAIGHT . . . . . . . . . . . . . . 218
JIFFY CLIPS - STANDARD . . . . . . . . . 145
JIG SAWS......................345
JIG SAW BLADES . . . . . . . . . . . . . . . . 345
Bosch Style Specifications . . . . . . . . 345
Universal Style Specifications . . . . . 345
JOB SITE RADIO . . . . . . . . . . . . 274, 289
JOBBERS LENGTH TWIST
DRILL BITS SETS . . . . . . . . . . 297-298
JOBOX STORAGE CHESTS . . . . . . . . . 535
JUNIOR CHANNEL . . . . . . . . . . . . . . . 133
JUNIOR TOP BEAM CLAMPS . . . 188, 221
k
KARP ACCESS DOORS . . . . . . see Acudor
KEP LOCK NUTS . . . . . . . . . . . . . . . . . 32
KEROSENE CANS . . . . . . . . . . . . 563, 595
KIDDE FIRE EXTINGUISHERS . . . . . . . 627
KINDORF, (see also Strut) . . . . 125-141
KLEIN TOOLS®
Bolt Bags ....................457
Bull-Pins.....................457
Canvas Tool Bags . . . . . . . . . . . . . . 457
Diagonal-Cutting Pliers . . . . . . 390-391
Leather-Bottom Bucket . . . . . . . . . . 457
Side Cutting Pliers . . . . . . . . . 390-391
Tool Belts....................457
KLO-SHURE INSULATION
COUPLING SYSTEM . . . . . . . . 142, 212
KNAACK. . . . . see JOBOX or GREENLEE
KNIVES ...................351, 444
KNOCK OUTS / PUNCHES . . . . . 368-371
Draw Studs. . . . . . . . . . . . . . . 372-373
KNOCK-OUT (KO) STRUT . . . . . . . . . . 132
KNOCK-OUT RACEWAY. . . . . . . . . . . . 133
KNOCKOUT FLUORESCENT
RACEWAY SYSTEM . . . . . . . . . . . . . 133
KNOT WIRE CUP BRUSHES . . . . 485-486
KNOT WIRE WHEEL BRUSHES . . 483, 485
KRAFT PAPER - WATER SHIELD
REINFORCED .................539
KRYLON (PAINTS) . . . . . . . . . . . 543-544
KWIK-BOLTS . . . . . . see Wedge Anchors
KWIC-LOC HANGING SYSTEMS . 167, 234
l
LADD - PINS & CLIPS. . . . . . . . . . . . . 124
LADDERS.................. 524-526
LAG SCREWS....................26
LAG SHIELD....................104
LAMINATING SCREW . . . . . . . . . . . . . . . 5
LANYARDS . . . . . . . . . . . . . . . . . 600-605
Self-Retracting . . . . . . . . . . . . . . . . 605
647
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX L
l (continued)
LARGE DIAMETER SCREW ANCHORS. 88-89
LASER LAYOUT TOOLS. . . . 272, 446-449
LASER TEMP-GUN, M12. . . . . . . . . . . 272
LDT ANCHORS . . . . . . . . . . . . . . . . 88-89
LEAD SCRU™ ANCHORS . . . . . . . . . . . 105
LEAK-STOPPER . . . . . . . . . . . . . . . . . 566
LEATHER GLOVES. . . . . . . . . . . . 614-617
LENOX
Bandsaw blades . . . . . . . 353, 596-597
Bi-Metal Hole Saws. . . . . . . . . 307-308
Carbide Tipped Hole Saws. . . . . . . . 308
Gray Wolf™ Hacksaw Frame. . . . . . . 351
Hackmaster® Hacksaw Frame . . . . . 351
Hacksaw Blades . . . . . . . . . . . . . . . 351
Hole Cutters . . . . . . . . . . . . . . . . . . 301
Hole Saw Arbors. . . . . . . . . . . . . . . 307
Hole Saw Kits - Bi-Metal . . . . . . . . . 304
Big Daddy 2000G . . . . . . . . . . . . 304
Electrician No. 30802-1200L. . . . 304
Electrician No. 30821-602L. . . . . 304
Plumber No. 30808-602P . . . . . . 304
Jig Saw Blades . . . . . . . . . . . . . . . . 345
Lubricants....................598
Portabands® Master-Band. . . . . . . . 353
PVC/ABS Plastic Pipe Hand Saw . . . 351
Reciprocating Blade Kits . . . . . . . . . 347
Reciprocating Blades. . . . . . . . . . . . 350
Sawing fluids . . . . . . . . . . . . . . . . . 598
Tri-Fold® Saw .................351
Utility Knives . . . . . . . . . . . . . 351, 444
Vari-Bit® Step Drill Bits . . . . . . . . . . 303
Wolf-Band® Portable Band Saw Blade 353
LENS CLEANING TOWELLETTES . . . . 609
LEVEL - FATMAX® ...............445
LEVEL HEAD RAKE . . . . . . . . . . . . . . . 565
LEVER-TYPE CHAIN HOISTS . . . . . . . . 576
LI-ION CORDLESS TOOLS . . . . . 246-276
LIFELINES, SAFETY . . . . . . . . . . . 605-606
LIFTS . . . . . . . . . . . . . .428-429, 546-547
LIFTING EYES...................570
LIGHT BULBS . . . . . . . . . . . . . . . . . . 530
LIGHT DUTY
Beam Clamp..................138
Clevis Hangers . . . . . . . . . . . . . . . . 187
LIGHT STANDS..................528
LIGHT STRINGS . . . . . . . . . . . . . . . . . 528
LIGHTING, TEMPORARY. . . . . . . . . . . . . . 528
LIGHTWEIGHT WELDED STEEL BRACKET
.........................207
LI’L FISHER™ POWER FISHING SYSTEM 377
LINE LOCATORS. . . . . . . . . . . . . . . . . 437
LINERS, HARD HAT . . . . . . . . . . . . . . 618
LINK SEALS / INNERLYNX®. 210-211, 522
LITTLE KICKER® OFFSET BENDER . . . . 361
LO JACKS .....................426
LOAD BINDERS . . . . . . . . . . . . . 575, 580
LOADS, POWDERED . . . . . . . . . . . . . 120
LOCATORS, UTILITY . . . . . . . . . . 437-438
LOCK NUTS ..............see Nuts
18-8 Stainless Steel Nylon Insert . . . 34
All Metal Top - Grade C . . . . . . . . . . 33
Kep .........................32
Nylon Insert ...................32
Reversible ....................32
LOCKS, PADLOCKS . . . . . . 537, 594, 623
LOCKING
C-Clamp.....................456
Chain Clamp..................456
Curved Jaws/Wire Cutter Pliers . . . . 456
Straight Jaws Pliers . . . . . . . . . . . . 456
Welding Clamp . . . . . . . . . . . . . . . . 456
LOCKOUT TAGS . . . . . . . . . . . . . . . . . 624
LOCKOUTS ....................623
LOCKRITE - HOLDRITE . . . . . . . . 214-215
LOK-BOLT SLEEVE ANCHORS . . . . . . . . 84
LONG NOSE W/ WIRE CUTTER, PLIERS 391
LOUISVILLE LADDER
Fiberglass Extension Ladder . . . . . . 525
Fiberglass Step Ladder . . . . . . . . . . 524
Scaffolds ....................526
LT-101 FLANGE . . . . . . . . . . . . . . . . . 143
LT-109 STRUTCATCHER . . . . . . . . . . . 143
LUBE SPREADER SWAB . . . . . . . . . . . 385
LUBRICANTS ...................555
Pulling ......................385
Sawing......................598
LUGALL PORTABLE CABLE WINCH
HOISTS .....................580
LUMBER CRAYONS . . . . . . . . . . . . . . 542
LUMP HAMMERS . . . . . . . . . . . . . . . . 565
m
3M RESPIRATORS . . . . . . . . . . . 613-614
M12 DRILL DRIVER . . . . . . . . . . . . . . . 50
M-4 DRILL RIG HAND HELD CORE
MOTOR .....................338
M-LOK SPRINKLER RING . . . . . . . . . . 221
MACHINE SCREWS. . . . . . . . . see Screws
MACHINERY EYE BOLTS / LIFTING EYES 570
MAG DRILL CUTTERS . . . . . . . . . . . . . 334
MAG DRILL PRESSES . . . . . . . . . 332-333
MAG-LITE® FLASHLIGHTS . . . . . . . . . 529
MAGNETIC BIT HOLDERS . . . . . . . . . . 315
MAGNETIC BUBBLE LEVEL . . . . . . . . . 366
MAGNUM®
Hammer-Drills. . . . . . . . see Milwaukee
Hole-Shooters. . . . . . . . see Milwaukee
Right Angle Drill Kit . . . . see Milwaukee
MALLEABLE C-CLAMP . . . . . . . . . . . . 188
MALLEABLE EXTENSION PIECE . . . . . 219
MANAGED INVENTORY SYSTEM . . . . . . 57
MANHOLE LADDERS . . . . . . . . . . . . . 525
MANILA ROPE . . . . . . . . . . . . . . 573, 593
MANUCLAVE ...................604
MARKAL® MARKERS . . . . . . . . . 542-543
MARKING PAINT . . . . . . . . . . . . 543-544
MARKING WAND . . . . . . . . . . . . . . . . 544
MASKING TAPE . . . . . . . . . . . . . . . . . 542
MASON INDUSTRIES
Mounts & Pads Waffles. . . . . . 207, 230
Spring Mounts . . . . . . . . . . . . 207, 230
Vibration Isolation Hangers . . . 207, 230
MASTERLOCK
Laminated Steel Padlocks . . . . 537, 594
Safety Lockouts . . . . . . . . . . . . . . . 623
MATERIAL HANDLING . . . . 546-548, 567
MATERIAL LIFTS. . . . . .428-429, 546-547
MATTING......................567
MECHANICAL ANCHOR SELECTION GUIDE
.......................66-67
MECHANICAL BENDERS . . . . . . . . . . . 361
MECHANIC'S GLOVES. . . . . . . . . . . . . 615
MECHANICS’ VISES . . . . . . . . . . . . . . 586
MEDICAL SUPPORT GRIDS, STRUT Preface B
MEDIUM WELDED STEEL BRACKET . . 207
METAL
Cutting Saws . . . . . . . . . . . . . 355-356
Halide Lights. . . . . . . . . . . . . . . . . . 528
Saw Blades...................357
Paint Tray....................545
Stud Punches . . . . . . . . . . . . . . . . . 374
METAL DEVIL METAL CUTTING SAWS. . 356
METRIC FASTENERS & SPECIFICATIONS. . 60-61
MICE .........................378
MICHIGAN HANGERS . . . see Hangers
J-Hook Straight . . . . . . . . . . . . . . . 218
"Mickey Mouse Ear" Clamps . . . . . . 215
One Hole Pipe Strap . . . . . . . . . . . . 218
Plain/Welded Eye Rods . . . . . . . . . . 219
Return Line Angles . . . . . . . . . . . . . 217
Rod Couplings . . . . . . . . . . . . . . . . 219
Two Hole Pipe Strap . . . . . . . . . . . . 218
Wire Pipe Hook . . . . . . . . . . . . . . . 218
MICRO DRILLS 15-PIECE SETS . . . . . . 297
"MICKEY MOUSE EAR" CLAMPS . . . . . 215
MIDGET TUBING CUTTERS . . . . . . . . . 420
MILL HOSE ....................560
MILWAUKEE
10-1/4” Circular Saws . . . . . . . . . . . 355
14” Abrasive Cut-Off Machine . . . . . 359
14” Dry-Cut Machine . . . . . . . . . . . 358
15 Amp Grinders / Sanders . . . 343-344
4-1/2" Magnum® Sander/Grinder . . 340-343
7-1/4" Circular Saws . . . . . . . . . . . . 354
7-1/4” Worm Drive Saw . . . . . . . . . 355
8” Metal Cutting Saw . . . . . . . . . . . 355
Band Saws . . . . . . . . . . . . . . . . . . . 352
Band Saw Blades . . . . . . . . . . . . . . 353
Batteries.....................291
Carbide Bits
SDS .................. 322-323
SDS Max...................326
Spline.....................326
Straight....................317
Chargers.....................291
Chipping & Demolition Hammer . . . . 328
Circular Saws. . . . . . . . . . . . . . . . 354-355
Close Quarter Drills . . . . . . . . . . . . . . . 297
Copper Tubing Cutter, M12. . . . . . . . . . .269
Core Bits.......................327
Corded Tools . . . . . . . . . . . . . . . . 292-360
Circular Saws. . . . . . . . . . . . . . 354-355
Close Quarter Drills . . . . . . . . . . . . . 297
Drills .................... 292-294
D-Handle Drills . . . . . . . . . . . . . . . . 295
Hammer Drills . . . . . . . . . . . . . . .318-320
Heat Guns....................360
Hole-Hawgs...................296
Pistol Drills . . . . . . . . . . . . . . . 292-294
Right Angle Drills. . . . . . . . . . . . . . . 297
Rotary Hammers . . . . . . . . . 324-325
Screw Guns. . . . . . . . . . . . . . . . . 313
TEK Drivers . . . . . . . . . . . . . . . . . 313
Cordless Tools . . . . . . . . . . . . . . . 249-274
12V Li-Ion, M12 . . . . . . . . . . . 268-274
18V Li-Ion, M18 . . . . . . . . . . . 256-263
28V Li-ion, V28 . . . . . . . . . . . . 249-252
Li-Ion. . . . 249-252, 256-263, 268-274
Radios/Light. . . . . . . . . . . 262-263, 289
V28..................... 249-252
D-Handle Drills . . . . . . . . . . . . . . . . . . 295
Demolition Hammer Accessories . . . . 329
Demolition Hammers. . . . . . . . . . . . 328
Diamond Coring Motors
15 Amp Models . . . . . . . . . . . . . 336
20 Amp Models . . . . . . . . . . . . . 336
Large Base Assembly. . . . . . . . . . 337
Meter Boxes . . . . . . . . . . . . . . . . 337
Small Base Assembly. . . . . . . . . . 337
Vacuum Pump Assembly . . . . . . . 337
Water Collecting Gasket. . . . . . . . 337
Water Collecting Ring . . . . . . . . . 337
Water Hose.................337
Water Tank . . . . . . . . . . . . . . . . . 337
Diamond Drilling Rigs . . . . . . . . . . . 336
Die Grinder...................339
Drills, corded. . . . . . . . . . . . . . . . 292-294
Close Quarter Drills . . . . . . . . . . . . . 291
D-Handle Drills . . . . . . . . . . . . . . . . 295
Hammer Drills . . . . . . . . . . . . . . .318-320
Hole-Hawgs...................296
Pistol Drills . . . . . . . . . . . . . . . 292-294
648 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX M - P
m (continued)
MILWAUKEE . . . . . . . . . . . (continued)
Right Angle Drills. . . . . . . . . . . . . . . . . 297
Dry Cut Metal Blades . . . . . . . . . . . 357
Flat Boring Bits & Extensions . . . . . 298
Hammer Drills . . . . . . . . . . . . . . . . .318-320
Hackzall™ Reciprocating Saw, M12 . . . . .270
Heat Gun .........................360
Hex Shank Bits, & Hammer Accessories 317
Hole Saws . . . . . . . . . . . . . . . 304-306
Hole-Hawg® Drill...............296
Impact Wrenches . . . . . . 258-259, 316
Inspection Camera . . . . . . . . . . . . . . . . . .271
Job Site Radio . . . . . . . . 263, 274, 289
Jobbers Length Twist Drill Bits Sets 297
Laser, Plumb Tool, M12 . . . . . . . . . 272
Laser Temperature Gun ,M12 . . . . . 272
Multi-Bay Charger . . . . . . . . . . . . . 252
Nibblers.....................360
No-Hub Driver, M!2 . . . . . . . . . . . . . . . . .269
Pistol Drills . . . . . . . . . . . . . . . . . 292-294
Portable Electric Band Saws . . . . . . 352
PVC Shears, M12. . . . . . . . . . . . . . . . . . .270
Quick Change Arbor System . . . . . . 302
Rebar Locator. . . . . . . . . . . . . . . . . 271
Right Angle Drills. . . . . . . . . . . . . 270, 297
Rotary Hammers. . . . . . . . . . . 324-325
Sawzall® ................ 346-347
Sawzall® Blades . . . . . . . . . . . 348-349
Screw Guns/Tek Drivers. . . . . . . . . . 313
SDS Rotary Hammers . . . . . . . 318-320
SDS Carbide Tipped Bits . . . . . 321-323
Selfeed Bits & Quick Change
Auger Bits..................309
Sheet Metal Carbide Tooth Hole Saws
.........................302
Super-Hawg® Drill..............296
Stud Finder, M12 . . . . . . . . . . . . . . 271
Sub-Scanner, M12 . . . . . . . . . . . . . 271
Swivel Head Shear . . . . . . . . . . . . . 360
TEK Drivers...................313
Test & MEasurement Tools, M12 . .271-273
Tubing Cutter, M12 . . . . . . . . . . . . . . . . .269
MINERAL WOOL . . . . . . . . . . . . . . . . 501
MINERALLAC® MALLEABLE
BEAM CLAMP -CD SERIES. . . . . . 145
MINI DROP IN ANCHORS. . . . . . . 92, 224
MINI'S CADDY CD SERIES . . . . . . . . . 161
MINI STRUT....................133
MK MORSE
Bi-Metal Hole Saws / Arbors . . . . . . 305
Circular Saw Blades, Metal Cutting . . 357
Metal Devil Metal Cutting Saws. . . . . 356
MIRO ........................241
MISCELLANEOUS BRUSHES
. . . . . . . . . . . . . 487, 545, 552-553
MIXING PAN ...................566
MOBILE WORK BENCH . . . . . . . 533-535
MOLDED BEAM CLAMPS - FIBERGLASS 151
MOLDED CLEVIS HANGERS - FIBERGLASS 151
MOLDED RUBBER STRAPS. . . . . . . . . 538
MONOSYSTEMS ................148
MOPS ........................550
MOP BUCKETS..................550
MOP HANDLES . . . . . . . . . . . . . . . . . 550
MOPS / COMBO PACKS . . . . . . . . . . . 550
MORSE ............. see MK MORSE
MORTAR MIXING PAN . . . . . . . . . . . . 566
MOTOROLA TWO-WAY RADIOS. 583-584
MOUNTING BRACKET FOR ANY
ELECTRICAL BOX . . . . . . . . . . 158-159
MOUSTACHE CLIP (KX). . . . . . . . . . . . 160
MP HUSKY ....................148
MRO PILLOW...................558
MULTI-BAY CHARGER . . . . . . . . . . . . 252
MULTIPLEX CABLE PULLING ROPE . . 384
MULTI-SET II DROP-IN ANCHORS . . . . 92
n
N95 RESPIRATORS. . . . . . . . . . . 612-613
NAIL EATER II® POWER BITS . . . . . . . 309
NAIL PLATES ...................213
NAILING SLEEVE . . . . . . . . . . . . . . . . 209
NAILINS....................51, 103
NATICK HANGER (COPPER) . . . . . . . . 219
NEOPRENE BONDED SEALING TEKS . . . 7
NIBBLERS / SHEARS. . . . . . . . . . . . . . 360
NIEDAX BASKET TRAY . . . . . . . . . . . . 148
"NO-HUB" DRIVER, M12. . . . . . . . . . . 269
NO SPRING REGULAR CHANNEL NUTS 135
NO SPRING SHALLOW CHANNEL NUTS 135
NO TWIST WASHER . . . . . . . . . . . . . . 136
NON-METALLIC CABLE RACK
. . . . . . . . . . . . . . . . 126, 146-149, 152
NON-SHRINK GROUT. . . . . . . . . . . . . 566
NON-STANDARD U-BOLTS . . . . . . . . . 176
NON-WOVEN ROLLS - SAND-LIGHT™ 471
NOZZLES, HOSE . . . . . . . . . . . . . . . . 561
NUT DRIVERS / SETTERS . . . . . . . 10, 315
NUTS . . . . . . . . . . see also Hex Nuts
Acorn Cap - Brass. . . . . . . . . . . . . . . 55
Coil .....................33, 171
Hex Finished, Brass . . . . . . . . . . . . . 53
GR2 - plain & plated. . . . . . . . . . . . . 30
GR5 - plain & plated . . . . . . . . . . . 30
GR8 - plated...................30
Hot dipped galvanized. . . . . . . . . . 30
Stainless Steel. . . . . . . . . . . . . . . . 34
Hex Heavy
2H ASTM A194 . . . . . . . . . . . . . . . 31
Brass ......................53
Dimensions..................31
GR8 ASTM A194 Stainless Steel . . 31
GR8M ASTM A194 Stainless Steel 31
Plain & Plated. . . . . . . . . . . . . . . . 31
Stainless Steel. . . . . . . . . . . . . . . . 34
Hex Jam......................32
Kep .........................32
Lock.....................32, 173
Machine Screw
Brass ......................55
Stainless steel . . . . . . . . . . . . . . . . 34
Metric .......................61
Nylon Insert Lock . . . . . . . . . . . . . . . 32
Stainless Steel. . . . . . . . . . . . . . . . 34
Reducing Rod Coupling . . . . . . . 33, 174
Reversible Lock. . . . . . . . . . . . . . . . . 32
Rod Coupling . . . . . . . . . . . . . . 33, 174
Serrated flange lock . . . . . . . . . . . . . 32
Slip-on locknuts . . . . . . . . . . . . 31, 173
Slotted.......................33
Square.......................33
Structural ASTM A565 DH, DH3, 2H . . . . 31
Tee..........................33
Top lock GR-C. . . . . . . . . . . . . . . . . . 33
Wing.........................33
Brass ......................53
Stainless Steel. . . . . . . . . . . . . . . . 34
NYLON / WIRE BRUSHES . . . . . . . . . . 485
NYLON
Abrasive Brushes . . . . . . . . . . . . . . 485
Insert Lock Nuts . . . . . . . . . . . . . . . . 32
Nail-in Anchors . . . . . . . . . . . . . . . . 103
Nailin™ ......................103
Screens ......................76
Slings................... 581-582
o
O.D. TUBING PS 1200 / 701 . . . . . . . 140
OFFSET EYE BOLTS (PIG TAIL) . . . . . . 243
OFFSET PIPE CLAMPS . . . . . . . . . . . . 198
OFFSET STRIKING WRENCHES . . . . . . 454
OIL•DRI
Absorbents...................558
Booms 810 & 410S . . . . . . . . . . . . 558
Drum Top Pads. . . . . . . . . . . . . . . . 558
MRO Pillow ..................558
Polypropylene Roll . . . . . . . . . . . . . 558
OILER, RIDGID . . . . . . . . . . . . . . . . . . 413
ONE HOLE PIPE STRAPS & CLAMPS. . . 218
ONE PIECE PIPE STRAP . . . . . . . 139, 145
ONE PIECE STRUT CLAMP
SCH SERIES ..................161
ON-SITE SUPPLIES. . . . . . . . . .490-598
OPEN 4-HOLE ANGLE . . . . . . . . . . . . 136
OVATION™ FLAP DISCS . . . . . . . . . . . 469
OVERALL INDUSTRIAL AEROSOL PAINT
.............................543
OVERHEAD FASTENING . . . . . . . 123-124
OVERSHOE / SLUSH BOOT. . . . . . . . . 607
OVERSIZED DOWEL PINS. . . . . . . . . . . 58
p
P100 RESPIRATORY PROTECTION . . . 612
PACKAGING TAPE . . . . . . . . . . . . . . . 542
PADDLE BIT....................298
PADDLE SIGNS . . . . . . . . . . . . . . . . . 628
PADLOCKS. . . . . . . . . . . . . 537, 594, 623
PADS, E-Z CUT
(VIBRATION ISOLATOR) . . . . . . . . . 230
PAIL BUCKETS - ROUND & DOUBLE 550
PAINT & AEROSOL CHEMICALS . 543-544
PAINT BRUSHES . . . . . . . . . . . . . . . . 545
PAINT MARKERS . . . . . . . . . . . . . . . . 543
PAINT TRAYS ...................545
PANCAKE FRAMER SCREWS. . . . . . . . . . 4
PAPER TOWELS . . . . . . . . . . . . . . . . . 556
PARALLEL PIPE CLAMP . . . . . . . . . . . 139
PARTICLE BOARD SCREWS. . . . . . . . . . . 9
PAVEMENT BREAKERS . . . . . . . . . . . . 328
PEANUT SCREWS..................4
PEAR HEAD RATCHETS. . . . . . . . . . . . 452
PEERLESS (ACCO®)
Lifting Chain & Accessories . . . . 475-480
PENCILS, CARPENTER . . . . . . . . . . . . 542
PENCIL POINT SAN ANGELO BAR . . . 565
PENCIL VIBRATOR . . . . . . . . . . . . . . . 282
PENETRATING OIL . . . . . . . . . . . . . . . 555
PENNANT FLAGS . . . . . . . . . . . . . . . . 594
PERIMETER CABLE. . . . . . . . . . . 571-572
PERIMETER FENCING. . . . . . . . . 567, 594
PERIMETER FLAGGING. . . . . . . . . . . . 594
PFERD/ADVANCE BRUSH
Counter Dusters . . . . . . . . . . . . . . . 484
Cup Brushes..................486
Internal Tube Brushes . . . . . . . . . . . 488
Polifan™ Curve Flap Disc . . . . . . . . . 469
Scratch Brushes . . . . . . . . . . . . . . . 484
Wire Brushes . . . . . . . . . . . . . . . . . 484
Wire Cup Brushes . . . . . . . . . . . . . . 486
Wire End Brushes . . . . . . . . . . 486-487
Wire Wheels..................483
PHILLIPS INSERT BITS . . . . . . . . . . . . 315
PHILLIPS POWER BITS . . . . . . . . . . . . 315
PILLOWS, FIRESTOP . . . . . . . . . 493, 502
PINS ..........................58
PINS AND CLIPS . . . . . . . . . . . . 112-124
649
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX P - Q
p (continued)
PIPE
Alignment Guides - Spider Guides . . 203
Analysis, Stress. . . . . . . . . . . . . . . . 206
Anchors .....................203
Carts .......................388
Clamp
double bolt . . . . . . . . . . . . . . . . . 198
heavy duty . . . . . . . . . . . . . . . . . 198
standard...................198
Cutter Wheels. . . . . . . . . . . . . . . . . 421
Cutters . . . . . . . . . . . . . . 417-419, 440
Dies .......................413
Dolly/Cart . . . . . . . . . . . . . . . . 388, 427
Fabrication, Engineering . .Preface B, 206
Freezers.....................429
Groovers . . . . . . . . . . . . . . . . 414-417
Hanger - V-Clevis Plastic . . . . . . . . 185
Hanger Design & Fabrication Preface B, 206
Hangers . . . . . . . . . . . . . . . . . 179-244
Roll Stand....................192
Roll Stand with Base - Adjustable . . 193
Rollers & Roller Supports . . . . 190-193
Saddle Support. . . . . . . . . . . . 194-195
Saddle Support - Adjustable . . 194-195
Saddles (Insulation Covering Protection
Saddles) ...................191
Shields For Insulation Protection 186-187
Sleeve Positioner . . . . . . . . . . . . . . 209
Slide Assembly . . . . . . . . . . . . 202-203
Stanchion - Adjustable . . . . . . 194-195
Stanchion Saddle - Adjustable 194-195
Stands . . . . . . . . . . . . . . 194-195, 425
Tapping Tools . . . . . . . . . . . . . . . . . 423
Thread Taper Taps . . . . . . . . . 300-301
Threaders . . . . . . . . . . . . . . . 408-411
Wrenches......................442
PIPE & CONDUIT CLAMPS . . . . . . . . . 140
PIPE & CONDUIT HANGER. . . . . . . . . 139
PIPE HANGERS (see also Hangers)
.....................179-244
Stainless Steel . . . . . . . . . . . . . . . . 154
PIPE HANGERS QUICK REFERENCE 180-184
PIPE PIER™ . . . . . . . . . . . . . . . . . . . . 242
PIPE REAMERS . . . . . . . . . . . . . . . . . 418
PIPE SHIELDS INC., PRE-INSULATED
PIPE SUPPORTS. . . . . . . . . . . . 200-201
PIPE SLEEVES . . . . . . . . . . . . . . 209, 244
PIPE STRAPS
“EMT” PS 1000 / 700 . . . . . . . . . . . 140
“Rigid” PS 1100 / 702 . . . . . . . . . . 140
“Universal” PS 1300 / 703 . . . . . . . 140
O.D. Tubing PS 1200 / 701. . . . . . . 140
Porce-A-Clamp . . . . . . . . . . . . . . . . 140
PS 3792 Power-Wrap™..........140
PIPE TROUGH ..................185
PIPEFIX .......................213
PIPEMARKERS..................627
PIPEMARKING TAPE. . . . . . . . . . . . . . 627
PLASTIC ANCHORS / KITS . . . . . 108-109
PLASTIC PIPE SLEEVES. . . . . . . . 209, 244
PLASTIC SHEETING . . . . . . . . . . 538, 592
PLATE WASHER . . . . . . . . . . . . . . . . . 178
PLOW BOLTS ...................52
PLS® LASERS .............. 447-449
PLUMB BOB ...................446
PLUMB BOB, LASER, M12 . . . . . . . . . 272
PLUMBER STUD PUNCH . . . . . . . . . . 374
PLUMBER’S “T” HANDLE
TORQUE TOOLS . . . . . . . . . . . . . . . 442
PLUMBING HANGERS . . . . . . . . 213-225
POLE TOOLS . . . . . . . . . . . 112, 114, 123
POLIFAN™ CURVE FLAP DISC . . . . . . . 469
POLLY™ ANCHOR................110
POLY
Sheeting . . . . . . . . . . . . . . . . . 538, 592
Woven Blue Tarps . . . . . . . . . . 538, 592
POLY-COATED TYVEK® QC . . . . . . . . . 619
POLYESTER MEASURE/PULLING TAPES 376
POLYETHYLENE SHEETING . . . . . 538, 592
POLYPROPYLENE ROPE . . . . . . . . . . . 573
PORCE-A-CLAMP . . . . . . . . . . .139-140
PORCELAIN CABLE CLAMP . . . . . . . . 140
PORTABANDS® BLADES . . . . . . . . . . . 353
PORTABLE BAND SAWS . . . . . . . . . . . 352
PORTABLE BLOWER POWER
FISHING SYSTEM . . . . . . . . . . 377-378
PORTABLE CIRCULAR SAW. 261, 354-355
PORTABLE LIGHTING/LIGHT STRINGS 528
PORTABLE POWER CENTER . . . . . . . . 531
PORTABLE QUARTZ FLOODLIGHTS . . 528
PORTABLE ROLL GROOVERS 414-415, 417
POSIFIX, PIPEFIX . . . . . . . . . . . . . . 213
POST BASES & BRACKETS . . . . . . . . . 137
POST HOLE DIGGERS. . . . . . . . . . . . . 565
POWDER ACTUATED FASTENING 118-124
POWER BITS & NUT SETTERS . . . 10, 315
POWER DISTRIBUTION CENTER
(TEMPORARY).................531
POWERS FASTENERS
Bang-It™......................87
Bantam™ Plastic Plug Anchors . . . . . 109
Calk-In™ .....................105
Chem-Stud Capsules . . . . . . . . . . . . . 76
Installation Tools . . . . . . . . . . . . . . 76
Concrete Vertical Hanger
. . . . . . . . . . . . . .84, 91, 3, 98, 102
Double Expansion Shield. . . . . . . . . 104
Dropins . . . . . . . . . . . . . . . 90-92, 105
E-Z Anchor...................108
Hammer Capsules . . . . . . . . . . . . . . . 76
Hollow Set Drop-In . . . . . . . . . . 90, 105
Hollow Wall Anchor. . . . . 106, 108-110
LEGS Ancor™ .................109
Nylon Nailin™ .................103
Plastic Anchor Kits . . . . . . 48, 108-109
Power-Bolt® ...................86
Power-Stud™. . . . . . . . . . . . 68-70, 102
Power-Stud™ SD1...............69
Power-Stud™ SD2...............68
Power-Stud™ SD4...............70
Power-Stud™ SD6...............70
Powder Actuated Tools . . . . . . . . . . 118
P3500 ....................118
PA3500 ...................118
P3602 ....................118
Powerfoam™...................81
Safe-T-Pin .....................104
Screw Anchor Expanders . . . . . . . . 105
Scru™ Lead anchors . . . . . . . . . . . . 105
Sharkie Plastic Anchors. . . . . . . . . . 109
Single Expansion Shield. . . . . . . . . . 104
Sleeve Anchors . . . . . . . . . . . 84, 86, 93
Smart™ Drop In Anchors . . . . . . . . . . 91
Snake Anchors . . . . . . . . . . . . . . . . . 91
Spike Anchors. . . . . . . . . . . . . . 93, 102
Flat Head Spike®.............102
Installation Tools . . . . . . . . . . 93, 102
Mushroom Head Spike® .........102
Mushroom Head Type 316 Stainless
Steel Spike®..............102
Rod Hanging - Pipe Spike®.......93
Tie Wire Spike. . . . . . . . . . . . . . . 102
Steel Side Hanger . . . . . . . . . . . . . . . 98
Steel Vertical Hanger . . . . . . . . . . . . 98
Strength Design Anchors, (SD)
. . . . . . . . . .68-70, 72-73,74-75, 80
Vertigo™ Anchor Hangers. . . . . . . 98-99
POWERS FASTENERS . . . . (continued)
Wedge-Bolt Anchors . . . . . . . . . . 72, 88
410 Stainless Steel . . . . . . . . . . . 88
Carbon Steel Wedge-Bolt® BT . 72, 88
Carbon Steel Wedge-Bolt® OT . . . . 88
Carbon Steel Wedge-Bolt™. . . . 72, 88
Wood-Knocker™ ................87
Wood Side Hanger . . . . . . . . . . . . . . 98
Wood Vertical Hanger . . . . . . . . . . . . 98
Zamac Hammer-Screw®. . . . . . 103-104
Zamac Nailin™............. 103-104
Zip-It Wall Anchors . . . . . . . . . . . . . 108
POWER PIPE CUTTER. . . . . . . . . . . . . 418
POWER POINT™ PINS . . . . . . . . 121-122
POWER THREADING MACHINE . 408-411
POWERFOAM™ / TRIGGERFOAM™.....81
POWER-STRUT® ............see Strut
POWER-STUD® ANCHORS see POWERS
POWER TOOLS . . . . . . . . . . . .245-458
(see also Milwaukee, DeWalt, Bosch,
Greenlee, Ridgid
POWER-WRAP™.................140
PRE-INSULATED PIPE SUPPORTS. 200-201
PRETIES.......................124
PREMIUM BLACK CORE BITS . . . . . . . 335
PRESSURE WASHER HOSE . . . . . . . . . 560
PRINTED BARRICADE TAPE . . . . . . . . 628
PRO JACK .....................426
PROCELL® BATTERIES . . . . . . . . . . . . 530
PROFORCE DROP IN ANCHORS. . . . . . 91
PROOF COIL CHAIN . . . . . . . . . . . . . . 574
PROPRESS KIT..................439
PROPRESS SOIL CUTTER . . . . . . . . . . 439
PROTECTIVE CLOTHING . . . . . . . 619-622
PROTRACTOR W/ MAGNETIC BASE . . 366
PROTO, TORQUE WRENCH . . . . . . . . 454
PROPANE HEATERS . . . . . . . . . . . . . . 530
PRY BARS .....................565
PULLERS . . . . . . . . . . 378-381, 576, 580
PULLING GRIPS . . . . . . . . . . . . . 383-384
PULLING ROPE . . . . . . . . . . . . . . . . . 384
PUMP HOSE ...................559
PUMPS .......................559
PUNCH & DIE SETS . . . . . . . . . . . . . . 369
PUSHOVER® LOAD BINDERS . . . . . . . 575
PUTTY, FIRESTOP PADS . . . . . . . . . . . 493
PVC
Cutters . . . . . . . . . . . . . . 270, 392, 419
Gloves ......................617
Hose .......................560
Heating Blanket . . . . . . . . . . . . . . . 366
Plug Set . . . . . . . . . . . . . . . . . . . . . 366
Shears, M12..................270
PVC/ABS PLASTIC PIPE HAND SAW . . 351
PVC COATED WIRE ROPE . . . . . . . . . . 572
PYRAMID (CADDY) PIPE SUPPORT
. . . . . . . . . . . . . 155, 199, 238-241
Q
Q DECK SLEEVE . . . . . . . . . . . . . . . . . 209
QUAD BENDER™ 853, 854, 855 . . . . 362
QUARTZ & METAL HALIDE LIGHT BULBS 530
QUICK-BOLTS . . . . . see Wedge Anchors
QUICK CHANGE ARBOR SYSTEM . . . . 309
QUICK CHANGE AUGER BITS . . . . . . . 309
QUICK DRAW...................370
QUICK LINKS . . . . . . . . . . . . . . . . . . 575
QUICK-LOCK ADAPTERS, HOSE . . . . . 560
QUICK SQUARE® LAYOUT TOOL . . . . . 445
QUICK-ACTING TUBING CUTTER . . . . 420
650 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX R
r
RACEWAY......................133
RADIO - JOB SITE . . 252, 263, 274, 284
RADIO - MOTOROLA . . . . . . . . 583-584
RAGS.....................556, 593
RAINSUITS.....................607
RAKES ........................565
RAM BOARD ...................540
RAM, GREENLEE PUMPS. . . . . . . . . . 371
RAMSET®
Acoustical / Electrical 111-113, 119-124
Acoustical Pre-Ties . . . . . . . . . . . . . 124
Black Track Pins .300 Drive Pins . . . 121
Ceiling Clip Assemblies .300 Head. . 124
Ceiling Hanger Wire . . . . . . . . . . . . 124
Conduit Clamp . . . . . . . . . . . . 115, 122
Conduit Clip Assemblies . . . . . . . . . 124
Drive Pins. . . . 113, 117, 121-122, 124
Drywall Fastening System - TrakFast 117
Drywall PAT - 721. . . . . . . . . . . . . . 119
Extension Poles . . . . . . . . . . . 112, 123
Fastener Accessories. . . . . . . . . . . . 124
Gas Fastening Systems
Loads (Shots) . . . . . . . . . . . 120-122
Loads For Hilti Tools . . . . . . . . . . 120
Loads For Low Velocity Tools . . . . 120
Laser Tool....................446
Pins / Clips . . . . . . . 113, 117, 121-124
Plumbing / Sprinklers PAT . . . . 119, 123
Pole Tools. . . . . . . . . . . . . . . . 112, 123
Powder Actuated Tools . . . . . . . 11-123
PAT - SA270 . . . . . . . . . . . . . . . . 119
DC60 .....................119
Powder Selection Guide . . . . . . . . . 120
Power Point™ Pins. . . . . . . . . . 121-122
Rodmans Tie Wire. . . . . . . . . . . . . . 124
Step Shank Pins w/ Ceiling Clip . . . . 122
T3 Tool.................. 111-112
T3 Accessories . . . . . . . . 112-113, 122
Trak-It Fastening Tools . . . . . . 111, 114
Pole Tools . . . . . . . . . . 112, 114, 123
Battery . . . . . . . . . . . . . . . . 111, 114
Tool . . . . . . . . . . 111, 114, 116-117
Accessories . . . . . 111, 114, 116-117
Threaded Rod Hanger . . . . . . . . . . 122
Tie Strap Holder . . . . . . . . . . . . . . . 113
Top Hat Pin . . . . . . . . . . . . . . . . . . 121
U-Hank Tie Wire . . . . . . . . . . . . . . . 124
Viper .......................123
RAPIDGRIP WRENCH . . . . . . . . . . . . . 442
RATCHET ACSR / CABLE CUTTER . . . . 393
RATCHET CABLE CUTTER . . . . . . 393-395
RATCHET PUNCH DRIVER . . . . . . . . . 370
RATCHET SHEARS - CLEAN ROOM . . 422
RATCHET TYPE REEL STANDS. . . . . . . 385
RATCHETING WRENCH SETS . . . . . . . 454
RAWL .................see Powers®
RAZOR BLADES . . . . . . . . . . . . . 444, 592
REAMERS .....................418
REBAR CAPS ...................627
REBAR CUTTERS . . . . . . . . . . . . . . . . 323
REBAR LOCATOR, M12 . . . . . . . . . . . 271
RECIPROCATING BLADES . . . . . . 347-350
RECIPROCATING SAWS . . . 270, 346-347
RED ROSIN PAPER. . . . . . . . . . . . . . . 539
RED HEAD®
Condrive.....................100
Dynabolt Stainless Steel
Sleeve Anchors . . . . . . . . . . . . . . . . . 85
Dynabolt Sleeve Anchors. . . . . . . . . . 85
Multi-Set II Drop-In Anchors . . . . . . . 92
SDS Stop Bit . . . . . . . . . . . . . . . . . . 92
Tapcon......................100
Truebolt Wedge Anchors . . . . . . . . . . 83
REED
Clean Room Ratchet Shears . . . . . . 422
Hinged Cutters . . . . . . . . . . . . . . . . 417
Hole Master™ Hole Cutting Base . . . 422
REED ................. (continued)
Portable Roll Groovers . . . . . . . . . . 417
Steel Pipe Cutter. . . . . . . . . . . . . . . 417
Tristand .....................424
REDUCING ROD COUPLING NUTS . 33, 174
REEL STANDS . . . . . . . . . . . . . . 386-387
RELTON
Stop-Bits . . . . . . . . . . . . . . . . 178, 322
Rebar Cutters . . . . . . . . . . . . . . . . . 323
RESIN FIBER DISCS / BACKING PADS 479
RESPIRATORS . . . . . . . . . . 594, 612-613
RESPIRATORY PROTECTION . . . . 612-613
RETAINING STRAP FOR
STEEL C-CLAMP . . . . . . . . . . . 188-189
RETAINING STRAPS . . . . . . . . . . 188-189
RETRACTABLE LIFELINE . . . . . . 605-606
RETURN LINE ANGLES . . . . . . . . . . . . 217
RETURN LINE J-HOOK . . . . . . . . . . . . 218
REVERSIBLE LOCK NUTS . . . . . . . . . . . 32
RIDGID®
1224 Threading Machine . . . . . . . . 410
141 / 161 Geared Threaders. . . . . . 412
206 Soil Pipe Cutter . . . . . . . . . . . . 419
226 In-Place Soil Pipe Cutter . . . . . 419
246 Soil Pipe Cutter . . . . . . . . . . . . 419
276 Soil Pipe Cutter . . . . . . . . . . . . 419
258 & 258XL Power Pipe Cutter. . . . . 418
300 Threader . . . . . . . . . . . . . . . . . 408
300 Compact Threader . . . . . . . . . . 409
300 Series Lever Benders . . . . . . . . 419
418 Oiler ....................413
460 Tri-Stand Chain Vise. . . . . . . . . 424
535 Manual Threading Machine . . . . . 409
690 Power Drive. . . . . . . . . . . . . . . 411
915 Portable Roll Groover . . . . . . . 414
916 Portable Roll Groover . . . . . . . 414
918 Hydraulic Roll Groover . . . . . . . 416
918I Portable Roll Groover . . . . . . . 415
920 Portable Roll Groover . . . . . . . 416
975 Roll Groover . . . . . . . . . . . . . . 415
Aluminum Pipe Wrench . . . . . . . . . . 442
Chain Wrench . . . . . . . . . . . . . . . . . 442
Dies / Die Heads / Die Head Racks 412-413
Drain & Sewer Inspection . . . . 430-436
Dry Cut Saw..................358
DVD/Video Recorder . . . . . . . . 430-434
End Pipe Wrench . . . . . . . . . . . . . . 442
F-Series Vises . . . . . . . . . . . . . . . . . 586
HC-300 Hole Cutting Tool . . . . . . . . 422
Heavy-Duty Pipe Cutters . . . . . 417, 419
KOLLMANN
Drain Cleaners . . . . . . . . . . . . . . 441
K-3/K-6 Toilet Augers . . . . . . . . . 441
Super Freeze™ Pipe Freezing Tools 429
LT1000 Laptop Interface . . . . . . . . . 435
Manual Pipe Threaders . . . . . . . . . . 411
Midget Tubing Cutters. . . . . . . . . . . 420
Oiler........................413
Pipe Cutters & Cutter Wheels 418, 421
Pipe Dies ....................413
Pipe Reamers . . . . . . . . . . . . . . . . . 418
Pipe Stands . . . . . . . . . . . . . . 424-425
Pipe Wrenchs . . . . . . . . . . . . . . . . . 442
Plastic Pipe Tubing Cutters . . . . . . . 420
“Pony” Power Threading Model 700
Power Drive . . . . . . . . . . . . . . . . 411
Power Threading Machine . . . . 408-411
ProPress Kit . . . . . . . . . . . . . . 439-440
ProPress Soil Pipe Cutter . . . . . . . . 440
Quick-Acting Tubing Cutter . . . . . . . 420
RapidGrip Wrench. . . . . . . . . . . . . . 442
RT3422 Tapping Tool . . . . . . . . . . . 423
Roll Groovers . . . . . . . . . . . . . 414-416
Seektech . . . . . . . . . . . . . . . . 437-438
SeeSnake® ............... 430-435
Super-Freeze . . . . . . . . . . . . . . . . . 429
Tapping Tool. . . . . . . . . . . . . . . . . . 423
Thread Cutting Oil. . . . . . . . . . . . . . 407
Thread Sealant . . . . . . . . . . . . . . . . 407
Threader Stands . . . . . . . . . . . . . . . 410
RIDGID® . . . . . . . . . . . . . . (continued)
Tubing Cutters/Wheels. . . . . . . 420-421
Tristands . . . . . . . . . . . . . . . . 424-425
Wet & Dry Vacuum Filters . . . . . . . . 557
Wet & Dry Vacuums . . . . . . . . . . . . 557
RIGHT ANGLE CLIPS. . . . . . . . . . 113, 115
RIGHT ANGLE PIPE CLAMP . . . . . . . . 139
RIGID SEISMIC BRACING SYSTEMS -
TOLCO ................ 226-230
RIGID PIPE CLAMPS - FIBERGLASS 150-151
RIGID PIPE CLAMPS. . . . . . . . . . . . . . 140
Fiberglass . . . . . . . . . . . . . . . . . 150-151
RIPPING BARS . . . . . . . . . . . . . . 444, 565
RISER CLAMPS. . . . . . . . . . . . . . 185, 218
RIVETS / RIVET TOOLS . . . . . . . . . . 62-63
RIVETS ACTUAL SIZE CHART. . . . . . . . . 63
RIZE HANGING SYSTEMS. . . . . . 167, 234
ROD ANCHORS . . . . . . . . . . . . . . . 82-99
ROD ANGLE SIDE BEAM ATTACHMENT 217
ROD COUPLING NUTS . . . . . 33, 221, 221
ROD COUPLINGS . . . . . 33, 221, 179, 221
Long Length . . . . . . . . . . . . . . 174, 221
Reducing . . . . . . . . . . . . . . . . 174, 221
Standard . . . . . . . . . . . . 221, 179, 221
ROD, FORGED ENDS . . . . . . . . . . . . . 576
ROD HANGER CLIPS . . . . . . . . . . . . . 115
ROD INSULATOR SUPPORT . . . . . . . . 138
ROD LOCK
BEAM CLAMPS. . . . . . . . . . . . . . . . 127
CHANNEL NUTS . . . . . . . . . . . . . . . 127
ROD, THREADED . . . . . . . . . . .171-178
RODMANS TIE WIRE . . . . . . . . . . . . . 124
ROLL GROOVERS - PORTABLE . . . 414-417
ROLLER CHAIRS. . . . . . . . . . . . . 191-193
ROLLER, HANGERS . . . . . . . . . . 190-193
ROLLERS, STRUT . . . . . . . . . . . . . . . . 137
ROOF ANCHORS . . . . . . . . . . . . . . . . 604
ROOF BOOTS ..................244
ROOF DECK PLATES. . . . . . . . . . . . . . . 51
ROOF LEAK DIVERTER, TEMPORARY. . . 540
ROOFERS KIT - FALL RESTRAINT . . . . 602
ROOFGRIP DECK SCREWS . . . . . . . . . . 51
ROOFING NAILS . . . . . . . . . . . . . . . . 594
ROOFTOP SUPPORTS . . . 155, 236-242
Advance Support Products . . . . . . 241
Caddy Pyramid . . . . . . . 155, 238-242
B-Line Dura-Blok (C-Port) 155, 236-237
MIRO.......................241
Pipe-Pier ....................242
ROPE.....................573, 593
ROPE, WIRE. . . . . . . . . . . . . . . . 571-572
ROPE GRABS . . . . . . . . . . . . . . . 595, 606
ROTARY HAMMERS . . . . . . . . . . 317-320
ROTARY HAMMER BITS FOR SDS,
SDS-MAX & SPLINE
. . . . . . . . . .317, 321-323, 326-330
ROTO-ZIP ...............see DeWalt
ROTTEN COTTON (MINERAL WOOL) . 501
ROUND & SQUARE POINT SHOVELS 564
ROUND BRUTE® RECEPTACLES . . . . . 549
ROUND WATERSTOP SLEEVES . . . . . . 209
ROUST-A-BOUT . . . . . . . . . . . . . . . . . 429
RUBBER
Hose .......................560
Straps ......................538
Washers, Hose . . . . . . . . . . . . . . . . 560
RUBBERMAID®
Big Wheel® Cart ...............566
Big Wheel™ Container . . . . . . . . . . . 549
Brute® Mop Bucket . . . . . . . . . . . . . 550
H.D. Utility Cart . . . . . . . . . . . . . . . 548
Light Duty Utility Cart . . . . . . . . . . . 548
Mops, Handles, Buckets . . . . . . . . . 550
Tilt Trucks....................548
Trash Barrels (Round) . . . . . . . . . . . 549
RUST-OLEUM
Overall Industrial Aerosol Paint . . . . 543
Performance Industrial Enamels . . . 543
Upside-Down Marking Paints. . . 543-544
651
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX S
s
"66" CLIP . . . . . . . . . . . . . . . . . . . . . . 197
S HOOKS......................575
SADDLES .....................191
SAG ROD .....................177
SAE FLAT WASHERS. . . . . . . . . . . . . . . 36
SAFETY.................599-630
Anchors .....................604
Barricade Lights . . . . . . . . . . . . . . . 628
Barricades ...................628
Cans....................563, 595
Cones.......................628
Eye & Skin Flush Station . . . . . . . . . 618
Eyewear . . . . . . . . . . . . . . . . . 608-609
Faceshields. . . . . . . . . . . . . . . 610, 622
Fall Protection . . . . . . . . . . . . 600-606
Fencing. . . . . . . . . . . . . . . . . . 566, 594
Fire Extinguishers . . . . . . . . . . . . . . 627
First Aid Kits. . . . . . . . . . . . . . . . . . 618
Gloves .................. 614-617
Hard Hats. . . . . . . . . . . . . . . . 610-611
Harnesses. . . . . . . . . . . . . . . . 600-602
Hearing Protection . . . . . . . . . . . . . 607
High Voltage Protection. . . . . . . 18-622
Lifelines . . . . . . . . . . . . . . . . . . . 605-606
Lockouts.....................623
Pipemarkers..................627
Protective Clothing . . . . . . . . . 618-621
Rebar Caps...................627
Respiratory Protection . . . . . . 612-613
Rope Grabs ..................606
Self Retracting Lifeline . . . . . . 605-606
Signs . . . . . . . . . . . . . . . 625-626, 628
Traffic Vests . . . . . . . . . . 595, 629-630
Winter Liners . . . . . . . . . . . . . . . . . 618
SAFETY CANS. . . . . . . . . . . . . . . 563, 595
SAFETY EYEWEAR . . . . . . . . . . . 608-609
SAFETY FALL PROTECTION. . . . . 600-606
SAFETY FENCING . . . . . . . . . . . . 566, 594
SAFETY LIFELINES . . . . . . . . . . . 605-606
SAFETY LOCKOUTS . . . . . . . . . . . . . . 623
SAFETY PLATE - DIAMOND 4-WAY . . . 209
SAFELIGHT HARNESS / LANYARDS . . 600
Carabiners . . . . . . . . . . . . . . . 603, 606
Concrete Anchor Straps . . . . . . . . . 604
Confined Space 3-Way System . . . . 606
Cross-Arm Strap . . . . . . . . . . . 601, 604
Fall Protection Kit . . . . . . . . . . 600, 602
Girder Grip...................604
Hand Winch Man Rated . . . . . . . . . 606
Manuclave ...................604
Fall Limiter...................605
Rebar Assemblies . . . . . . . . . . . . . . 603
Retractable Lifeline . . . . . . . . . . . . . 605
SafeClaw ....................604
Roofers Kits . . . . . . . . . . . . . . . . . . 602
Shock Absorbing Lanyards . . . 600-603
Steel Erection Lanyard for 12’. . . . . 600
Tybak® Lanyard................603
SAIT
5/8-11 Adaptor. . . . . . . . . . . . . . . . 463
Aluminum Oxide Abrasive Belts. . . . 474
Aluminum Oxide Fiber Discs . . . . . . 478
Backing Pads . . . . . . . . . . . . . 477, 479
Carbide Burs . . . . . . . . . . . . . . . . . 482
Cartridge Rolls, Mandrell . . . . 481-482
Convolute Wheels . . . . . . . . . . . . . . 480
Cup Brushes for Small Grinders. 485-487
EZ-Chop™....................464
Flap Wheels . . . . . . . . . . . . . . 470-471
Fiber Discs...................478
Flap Discs, Ovation™............469
Grinding Wheels . . . . . . . . . . . 460-462
Hand Pads . . . . . . . . . . . . . . . 472, 553
Handy Rolls ..................472
Knot & Crimped Wire Wheels. . 483-488
Nylon Abrasive Brushes . . . . . . . . . 485
Saitlam F - Flap Discs . . . . . . . . . . . 468
SAIT . . . . . . . . . . . . . . . . . (continued)
Type 1 Chop Saw Wheels . . . . . . 464
Type 1 High Speed Cut Off Wheels 463, 465
Type 27 .045 Cutting Wheels . . . . . 462
Type 27 Grinding Wheels . . . . . . . . 460
Type 27 Specialty Cutting & Light
Grinding Wheels . . . . . . . . . . . . . 461
Saitlam F - Flap Discs . . . . . . . . . . . 468
Sait-Lok™ & Sait-Lok-R™
Specialty Laminated Discs . . 476-478
Sait-Lok™ Backing Pads . . . . . 477, 479
Saitscreen. . . . . . . . . . . . . . . . 472-473
Sand-Light™ Surface Conditioning
Backing Pads & Discs . . . . . 477, 479
Sand-Light™ Non-Woven Rolls . . . . . 471
Sand-Light™ Surface Conditioning
Sandpaper .................473
Surface Conditioning Belts . . . . . . . 475
Type 1
Bench Grinding Wheels . . . . . . . . 484
Chop Saw Wheels . . . . . . . . . . . . 464
Cut-Off Wheel Reducing Bushings 467
High Speed Cut Off Wheels . . . . .462-465
Type 11 Cup Wheels . . . . . . . . . . . . 467
Type 27 .045 Cutting Wheels . . . . . 462
Saitech Ultimate Performance™ 462
Type 27 Grinding Wheels . . . . 460-461
Type 27 Specialty Cutting & Light
Grinding Wheels . . . . . . . . . . . . . 461
Type 28 Grinding Wheels . . . . 461-462
Saitech Ultimate Performance™ 461-462
Unitized Wheels . . . . . . . . . . . . . 480
SAKRETE
Concrete Mix . . . . . . . . . . . . . . . . . 566
Hydraulic Cement . . . . . . . . . . . . . 566
Non-Shrink Grout . . . . . . . . . . . . . . 566
SAMMY SCREWS 14-15, 94-97, 222-225
SAMMY EXPRESS HANGERS . . 96, 224
SAMMY SPEEDY POLE . . . . . . 97, 225
SAMMY SOCKETS . . . . . . . . . . 97, 225
SAMMY SWIVEL. . . . . . . . . . . . . .95-97
SANDERS & GRINDERS . . . . . . . 339-344
SANDPAPER....................473
SAUSAGE PACK (Firestop) . . . . . 490, 502
SAWING FLUIDS. . . . . . . . . . . . . . . . . 598
SAW BLADES
Asphalt......................331
Band Saw . . . . . . . . . . . . . . . . 596-597
Band Saw, Portable . . . . . . . . . . . . 353
Chop .......................359
Concrete.....................331
General Purpose, Circular . . . . . . . . 357
Hacksaw.....................351
Hackzall®, Recip Blades. . . . . . . . . . 270
Jig .........................345
Metal Cutting, Circular . . . . . . . . . . 357
Reciprocating . . . . . . . . . 270, 347-350
Segmented High Speed . . . . . . . . . . 331
SAWZALL® ................. 346-347
Blades - Milwaukee . . . . . . . . 348-348
Reciprocating Saw Blades 270, 347-350
SCAFFOLDS....................526
SCAFFOLD TAGS . . . . . . . . . . . . . . . . 525
SCH SERIES 1-PC STRUT CLAMPS . . . 161
SCOTCHBRITE PADS . . . . see Hand Pads
SCRATCH BRUSH - CURVED HANDLE
.....................484, 553
SCREW GUNS/TEK DRIVERS . . . . 313-314
SCREW - LAMINATING . . . . . . . . . . . . . 5
SCREW PIN ANCHOR SHACKLES . . . . 574
SCREWS
Brass ..................... 54-55
Blackies (Framer Screws) . . . . . . . . . . 4
Cabinet........................9
Carriage......................26
Cement Board ..................8
Coach........................51
Deck..........................6
Eyelag ........................7
SCREWS . . . . . . . . . . . . . . (continued)
Framer - Sharp point . . . . . . . . . . . . . 4
Fiber Cement Board . . . . . . . . . . . . . . 8
Floor Board, Torx . . . . . . . . . . . . . . . . 4
Green Grounding . . . . . . . . . . . . . . . 51
High/Low Drywall . . . . . . . . . . . . . . . . 6
Lag..........................26
Stainless Steel. . . . . . . . . . . . . . . . 49
Laminating .....................5
Machine Screws
Flat, Phillips Machine Plated . . . . . 44
Fillister Slotted Machine Plated . . . 44
Flat, Slotted Machine Plated . . . . . 43
Pan, Phllips Plated . . . . . . . . . . . . 42
Round Combo, Plated . . . . . . . 40-41
Truss, Slotted . . . . . . . . . . . . . . . . 41
Stainless Steel. . . . . . . . . . . . . 45-46
Metric................... 60-61
Pan, Slotted, Plated . . . . . . . . . . . 40
Roofgrip Steel Decking . . . . . . . . . 51
Sammy’s . . . . . . . . . . . .12-15, 94-97
Security (Tamperproof) . . . . . . . . . 50
Self-Drilling, TEKS
410 Stainless . . . . . . . . . . . . . . . . . 3
Drywall......................6
Eye Lag......................7
Framer, pancake . . . . . . . . . . . . . . . 4
Hex Washer, #2 & #3 pt. . . . . . . . . 2
Hex, w/ neoprene washer . . . . . . . . 7
High Hex Head, #3 pt. . . . . . . . . . . 3
Pan Framer Tek. . . . . . . . . . . . . . . . 4
Sheet Rock . . . . . . . . . . . . . . . . . . . 6
Stitch .......................3
Trim Head....................6
Wafer K Lath . . . . . . . . . . . . . . . . . . 4
Wafer, plymetal . . . . . . . . . . . . . . . . 4
Sheetmetal
Flat, Phillips, plated. . . . . . . . . . . . 48
Hex Washer, Slotted, plated . . . . . 48
Pan Combo, plated . . . . . . . . . . . . 47
Pan, Phillips, plated. . . . . . . . . . . . 47
Stainless Steel. . . . . . . . . . . . . . . . 49
Set Screws....................59
Socket .......................59
Thumbscrews ..................51
Tie Wire Acoustical Toggle. . . . . . . . . . 7
Vertigo . . . . . . . . . . . . . . . . . 16, 98-99
Wafer K-Lathe, sharp point . . . . . . . . . 4
Wall Dog. . . . . . . . . . . . . . . . . . 15, 107
Wood, brass...................56
Zip Screws .....................4
SCRU™ LEAD ANCHORS . . . . . . . . . . . 105
SCRUBS® HAND CLEANER TOWELS
.....................554, 556
SDS HAMMER BITS . . . . . . . . . . 321-323
SDS PLUS ROTARY HAMMERS . . 318-320
SDS SHANK CARBIDE TIPPED BITS 321-323
SDS STOP BITS . . . . . . . . . . . . . . 92, 322
SDS-MAX SHANK HAMMER BITS 326-330
SEALING WASHER . . . . . . . . . . . . . . . 115
SEALANTS, FIRESTOP . . . . . . . . 490-502
SECURITY LOCKS . . . . . . . . . . . . . . . . 537
SECURITY / TAMPER PROOF SCREWS 50
SEEKONK® PLUMBER’S “T” HANDLE
TORQUE TOOLS . . . . . . . . . . . . . . . 442
SEEKTECH™ . . . . . . . . . . . . 430, 437-438
SEESNAKE® ................ 430-435
SEGMENTED DRY HIGH SPEED BLADES
. . . . . . . . . . . . . . . . . 331, 466-467
SEISMIC BRACING SYSTEMS -
RIGID COMPONENT - TOLCO. . 226-230
SEISMIC / TENSION ZONE ANCHORS
.......................68- 75
SELF DRILLING DRYWALL SCREWS. . . . . 6
SELF DRILLING EYE LAG SCREWS. . . . . . 7
SELF DRILLING SCREWS . . . . see Screws
SELF PIERCING (SLOTTED) HEX WASHER
HEAD NEEDLE POINT SHEET METAL
SCREWS.......................4
652 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX S
s (continued)
SELF RETRACTING LIFELINES . . . . . . . 605
SELFEED BITS . . . . . . . . . . . . . . 311-312
SELF-TAPPING SCREWS . . . . see Screws
SENTRY III™ CAP HARD HAT . . . . . . . . 610
SHACKLES, SCREW PIN . . . . . . . . . . . 574
SHALLOW STRUT . . . . . . . . . . . . . . . . 130
SHEARS/NIBBLER. . . . . . . . . . . . . . . . 360
SHEAVES ......................383
SHEET METAL SCREWS . . . . see Screws
Combo Head ..................47
Flat Phillips . . . . . . . . . . . . . . . . . . . 48
Pan Phillips ...................47
Self Piercing (Slotted) Hex Washer
Head Needle Point . . . . . . . . . . . . . 4
Slotted Hex Washer . . . . . . . . . . . . . 48
SHEET METAL TOOL - VISE-GRIP . . . . 456
SHEETING . . . . . . . . . . . . . . . . . 538, 592
SHELF BINS / DIVIDERS . . . . . . . . . . . 567
SHIP AUGER BIT . . . . . . . . . . . . . . . . 309
SHOP-VAC (see vacuums) .........557
SHORT 2-HOLE STRAP . . . . . . . . . . . . 218
SHOTS AND PINS . . . . . . . . . . . 112-124
SHOVELS / SCOOPS . . . . . . . . . . . . . . 564
SIDE BEAM BRACKET. . . . . . . . . . . . . 217
SIDE BEAM CLAMPS - ADJUSTABLE . 196
SIDE BEAM CONNECTOR
MALLEABLE IRON . . . . . . . . . . . . . 217
SIDE CUTTING PLIERS . . . . . . . . . . . . 390
SIDE LOCK “J” HANGER. . . . . . . . . . . 218
SIGNS . . . . . . . . . . . . . . . . 625-626, 628
SEISMIC BRACING SYSTEMS . . . 226-230
SILENCER (HOLDRITE) . . . . . . . . . . . . 144
SILICONE CAULK . . . . . . . . . . . . . . . . 544
SILT FENCE ....................566
SILVER & DEMING DRILLS . . . . 297-299
SIMPLE GREEN CLEANERS . . . . . . . . . 554
SINGLE EXPANSION SHIELD. . . . . . . . 104
SINGLE JACK CHAIN . . . . . . . . . . . . . 574
SINGLE ROD ROLLERS
CLEVIS TYPE ROLLERS). . . . . . . . . . 190
SITE-RITE® HAND BENDERS . . . . . . . . 361
"SIXTY-SIX" CLIP . . . . . . . . . . . . . . . . . 197
SK SERIES UNIVERSAL STRUT CLAMP 161
SLEDGE HAMMERS . . . . . . . . . . . . . . 565
SLEEVE ANCHORS . . . . . . . . . . 84-86, 93
SLEEVES . . . . . . . . . . . . . . . . . . 209, 244
SLEEVES, FIRESTOP . . . . . . . . . . 490-502
SLICK NUT, CADDY. . . . . . . . . . . . . . . 135
SLIDE CONFIGURATION . . . . . . . . . . . 202
SLIP-ON LOCK NUTS . . 31, 134-135, 173
SLOTTED ANGLE . . . . . . . . . . . . . . . . 132
SLINGS
chain .......................579
wire rope ....................580
nylon ................... 581-582
SLOTTED NUTS ..................33
SLOTTED SUPPORT SYSTEM . . . . . . . 132
SLUG-BUSTER® HYDRAULIC
DRIVER KITS . . . . . . . . . . . . . . 370-371
SLUSH BOOT...................607
SMART QUAD BENDER® 855 . . . . . . . 362
SMART NUT....................165
SNAKE ANCHORS . . . . . . . . . . . . . . . . 91
SNAP-N-STRUT™................144
SNIPS, METAL CUTTING . . . . . . . . . . . 444
SOAP STONE MARKERS. . . . . . . . . . . 542
SOAPER MONKEY . . . . . . . . . . . . . . . 382
SOCKET CLAMP W/ WASHER,
UNDERGROUND . . . . . . . . . . . . . 243
SOCKET SET SCREWS . . . . . . . . . . . . . 59
SOCKET SETS. . . . . . . . . . . . . . . 451-455
SOCKET WASHERS. . . . . . . . . . . . 52, 243
SOIL PIPE CUTTERS . . . . . . . . . . 419, 440
SOLID RACEWAY . . . . . . . . . . . . . . . . 133
SORBENTS.....................558
SPADE BITS / AUGER BITS . . . . . 298, 309
SPECIAL U-BOLT . . . . . . . . . . . . . . . . 176
SPEED LINK . . . . . . . . . . . . . . . . 168, 235
SPEEDICUT GAS SAW. . . . . . . . . . . . . 331
SPIDER GUIDES - PIPE ALIGNMENT
GUIDES .....................201
SPIKE ANCHORS. . . . . . . . . . . . 93, 102
Installation Tools. . . . . . . . . . . . . . . 102
Flat Head Spike®...............102
Mushroom Head Spike . . . . . . . . . . 102
Steel Spike® ..................102
Rod Hanging...................93
Tie Wire Spike®................102
SPIN-IN CAPSULES . . . . . . . . . . . . . . . 76
SPLINE DRIVE ROTARY HAMMERS. . . . 325
SPLINE, SDS & SDS MAX HAMMER
ACCESSORIES BITS . . . . . . . . 326-330
SPLIT RING HANGER . . . . . . . . . . . . . 217
SPLIT SLEEVE...................209
SPRAY CLEANERS . . . . . . . . . . . . . . . 554
SPRAY PAINT . . . . . . . . . . . . . . . 543-544
SPRAYERS .....................563
SPRING (CHANNEL) NUTS . . . . . 134-135
SPRING CLAMPS . . . . . . . . . . . . . . . . 587
SPRING HANGERS - CONSTANT
SUPPORTS - SWAY BRACES . . . . . . 204
SPRING NUTS -
SHORT / REGULAR / LONG . . . 134-135
SPRING PINS (ROLL PINS) . . . . . . . . . . 58
SPRINKLER RINGS (EMLOK). . . . . . . . 221
SPUD WRENCHES . . . . . . . . . . . . . . . 453
SQUARE “FISH” PLATES. . . . . . . 178, 217
SQUARE DRIVE IMPACT WRENCHES
. . . . . . . . . . . . . 258-259, 280, 316
SQUARE INSERT & POWER BITS . . . . 315
SQUARE NUTS...................33
SQUARE POINT SHOVELS . . . . . . . . . 564
SQUARE BEVEL WASHER . . . . . . . . . . . 21
SQUEEGEES....................552
SPRAY PAINT . . . . . . . . . . . . . . . 543-544
STAINLESS STEEL STRUT . . . . . . . . 154
STAINLESS STEEL
A193 B8 Hex Cap Screws . . . . . . . . . 25
A193 B8M Hex Cap Screws . . . . . . . 25
Button Head Cap Screws. . . . . . . . . . 59
Finished Hex Nuts. . . . . . . . . 28-29, 34
Hangers .....................154
Hangers Hardware . . . . . . . . . . . . . 154
Heavy Hex Nuts . . . . . . . . . . 28-29, 34
Hex Cap Screws . . . . . . . . . . . . . 28-29
Hex Machine Screw Nuts . . . . . . . . . 34
Lag Screws....................51
Machine Screws . . . . . . . . . . . . . 45-46
Self-Drilling. . . . . . . . . . . . . . . . . . . 3, 5
Sheet Metal Screws . . . . . . . . . . . . . 49
Strut / Hardware. . . . . . . . . . . . . . . 154
Threaded Rod. . . . . . . . . . . . . . . . . 173
STAKFIX.......................213
STANDARD DOUBLE BOLT PIPE CLAMP 198
STANDARD PIPE CLAMP . . . . . . . . . . 198
STANLEY®
1991® Regular Duty Utility Blade . . 444
Adapters ....................453
Adjustable Spud Wrench . . . . . . . . . 453
Adjustable Wrenches. . . . . . . . . . . . 453
Foot Pound Torque Wrenches
- Ratchet Head . . . . . . . . . . . . . . 454
Brass Plumb Bob . . . . . . . . . . . . . . 446
Chalk Line Reels . . . . . . . . . . . . . . . 446
Chalk Refills . . . . . . . . . . . . . . . . . . 446
Classic 99® Retractable Utility Knife 444
Combination Squares . . . . . . . . . . . 445
Combination Wrenches . . . . . . 453-454
Drive Extension. . . . . . . . . . . . . . . . 453
FatMax® Brassbound Hardwood Level 445
FatMax® Chalk Line Reel . . . . . . . . . 446
FatMax® Level.................445
Forged Hexagonal Steel Ripping Bar 444
High Access Ratcheting Wrench Set 454
Impact Sockets . . . . . . . . . . . . . . . . 452
Layout Tools . . . . . . . . . . . . . . 445-446
Maxsteel™ Aviation Snips . . . . . . . . 444
STANLEY® . . . . . . . . . . . . (continued)
Offset Striking Wrenches. . . . . . . . . 454
Pear Head Ratchets . . . . . . . . . . . . 452
Putty Knives . . . . . . . . . . . . . . . . . . 446
Quick Square® Layout Tool . . . . . . . 445
Socket Sets . . . . . . . . . . . . . . 451-454
Solid Hardwood Tri Square . . . . . . . 445
Structural Wrenches - Offset Head . 453
Universal Joints . . . . . . . . . . . . . . . 453
Wonder Bar® Pry Bar . . . . . . . . . . . 444
Sockets / Wrenches. . . . . . . . . 451-454
Tape Rules ...................443
STEEL BEAM CLAMPS . . . . . . . . 198-197
STEEL BRACKET . . . . . . . . . . . . . . . . . 198
STEEL CUT SAWS . . . . . . . . . . . . 354-356
STEEL ERECTION LANYARD . . . . 600-606
STEEL FISH TAPES . . . . . . . . . . . . . . . 375
STEEL MORTAR MIXING PAN . . . . . . . 566
STEEL PIPE CUTTER . . . . . . . . . . . . . . 417
STEEL PLATE ...................213
STEEL SIDE HANGER . . . . . . . . . . . . . 217
STEP BITS .....................303
STEP LADDERS . . . . . . . . . . . . . . . . . 524
STEP SHANK PINS . . . . . . . . . . . . . . . 113
STI (FIRESTOP) . . . . . . . . . . . . . 491-499
STICK-E ACCESSORIES . . . . . . . . . . . . 114
STICK-E STEP SHANK PINS . . . . . . . . 114
STITCH TEK SELF DRILLING SCREW . . . . 3
STOP-BITS . . . . . . . . . . . . . . . . 92, 322
STOP SIGNS ...................628
STORAGE BOXES . . . . . . . . . . . . 532-536
STOUT BRACKETS & CLAMPS . . 214-215
STRAIGHT PIPE SLEEVE . . . . . . . . . . . 209
STRAIGHT SHANK PINS . . . . . . . 113-117
STRAINER, HOSE . . . . . . . . . . . . . . . 560
STRAP - “SHORT” 2-HOLE . . . . . . . . . 218
STRAP HANGER CLIPS . . . . . . . . . . . . 165
STRAP TOGGLE ANCHOR . . . . . . . . . . 110
STRAP WASHER . . . . . . . . . . . . . . . . . 115
STRENFLEX SLINGS . . . . . . . . . 580-582
Endless Roundslings . . . . . . . . . . . . 582
Nylon Slings . . . . . . . . . . . . . . . . . . 581
Tie Downs, Ratcheting. . . . . . . . . . . 581
Wire Rope & Slings. . . . . . . . . . . . . 580
STRENGTH DESIGN ANCHORS, (SD)
. . . . . . . . . .68-70, 72-73,74-75, 80
STRESS ANALYSIS, PIPE. . . . . . . . . 206
STRIKING WRENCH . . . . . . . . . . . . . . 454
STRIP BROOMS . . . . . . . . . . . . . . . . . 551
STRIPING PAINT & MACHINES . . . . . . 544
STRIPPER BOLTS . . . . . . . . . . . . . . . . . . .
......see Socket Shoulder Screws
STRONG BACK CHANNEL ASSEMBLY 208
STRUCTURAL
Bolts .................. 18, 20-21
Nuts.........................21
Wrenches - Offset Head . . . . . 453-454
STRUT..................125-170
1-5/8” “Back-to-Back” Strut . . . . . . 131
1-5/8” “Deep” Strut . . . . . . . . . . . . 130
13/16” “Shallow Strut . . . . . . . . . 130
2-7/16” “Deep” Strut . . . . . . . . . . . 131
3-1/4” “Deep” Strut . . . . . . . . . . . . 132
Channel & Combinations . . . . . . . . . 128
Channel Hole Pattern . . . . . . . . . . . 129
Channel Nut for Strut . . . . . . . 127, 134
Channel Overview . . . . . . . . . . 128-129
Closure Strip. . . . . . . . . . . . . . 132-133
Concrete Insert Strut . . . . . . . . . . . 133
Fittings . . . . . . . . . . . . . . . . . . 136-137
90° Angle Fittings . . . . . . . . . . . . 136
Angular Fittings . . . . . . . . . . 136, 138
Brackets...................137
Flat Plate Fittings . . . . . . . . . . . . . . 136
Miscellaneous Fittings . . . . . 136-137
Post Bases . . . . . . . . . . . . . . . . . 137
U-Bolt Fittings. . . . . . . . . . . . . . . 139
U-Fittings . . . . . . . . . . . . . . . . 138-139
Z-fittings...................139
653
Philadelphia, PA Washington D.C. Boston , MA Hartford, CT
610-647-8070 877-419-2755 800-645-6155 800-969-0285
FASTENERSANCHORSSTRUT
THREADED
ROD
PIPE
HANGERSTOOLSABRASIVES
ONSITE
SUPPLYSAFETYRENTALS
INDEX S - T
s (continued)
STRUT. . . . . . . . . . . . . . . . (continued)
Electrical Accessories . . . . . . . . . 133
EMT Strut Clamp. . . . . . . . . . . . . 140
Knock Out Strut . . . . . . . . . 132-133
Porcelain Clamps. . . . . . . . . 139-140
Ridgid Strut Clamps. . . . . . . . . . . 140
Strut Joiners . . . . . . . . . . . . . . . . 136
Universal Strut Clamp . . . . . . . . . 140
Fiberglass Strut
Beam Clamps . . . . . . . . . . . . . . . 151
Channel....................150
Channel Nuts . . . . . . . . . . . . . . . 151
Clevis Hangers . . . . . . . . . . . . . . 151
Hardware . . . . . . . . . . . . . . 150-151
Strut Pipe Clamps . . . . . . . . . . . . 151
Threaded Rod . . . . . . . . . . . . . . . 151
Junior Channel (Mini-Strut) . . . . . . . 133
Mechanical Accessories
Beam Clamps . . . . . . . . . . . . . . . 138
Hydrazorbs/Cush-A-Clamp . . . . . . 141
Klo-Shure . . . . . . . . . . . . . . 142, 212
Pipe Brackets . . . . . . . . . . . . . . . 137
Pipe Clamps . . . . . . . . . . . . . . . . 140
Pipe Rollers ....................137
Power Wrap . . . . . . . . . . . . . . . . 140
Rooftop Supports
. . . . . . . . . .155, 198-199, 236-242
Universal Strut Clamp . . . . . . . . . 140
Knock-out Strut . . . . . . . . . . . 132-133
Slick Nut for Strut. . . . . . . . . . . . . . 135
Slotted Angle . . . . . . . . . . . . . . . . . 132
Spring Nut for Strut . . . . . . . . . . . . 135
Top Grip Nut for Strut. . . . . . . . . . . 135
Twirl Nut for Strut. . . . . . . . . . . . . . 135
STRUT ASSEMBLY & CUTTING SERVICES
...................PREFACE B
STRUT CATCHER . . . . . . . . . . . . . . . . 143
STRUT CLAMPS / CLIPS . . . 140-141, 151
STRUT FITTINGS & ACCESSORIES 136-139
STRUT QUICK REFERENCE . . . . . . . . . 125
STRUT STRAP / CLIP. . . . . . . . . . . . . . 140
STRUT SUPPORT GRIDS . . . . . . .Preface B
STRUT SYSTEMS . . . . . . . . . . . . . . . . 126
STRUT-CHANNEL . . . . . . . . . . . . 128-133
STUD FINDER, M12 . . . . . . . . . . . . . . 271
STUD GUARD...................213
STUD NUT REGULAR, WITH STUD . . . 135
STUD PUNCHES . . . . . . . . . . . . . . . . . 374
STUD WELDING..................19
STUDS.................... 174-178
SUB-SCANNER, M12 . . . . . . . . . . . . . 271
SUBMERSIBLE PUMPS . . . . . . . . . . . . 559
SUCTION HOSE . . . . . . . . . . . . . . . . . 560
SUMNER
“Return” Line J-Hook . . . . . . . . . . . 218
2100 Lifts. . . . . . . . . . . . . . . . 428, 546
Adjust-A-Fit®..................427
Adjust-A-Flange®...............427
Adjust-A-Rolls®................427
Cricket ......................427
Flange Pins...................427
Grasshopper..................427
Hi Jacks . . . . . . . . . . . . . . . . . . . . . 426
Lifts . . . . . . . . . . . . . . . . 428, 546-547
Lo Jacks.....................426
Nail Plate....................213
Original Jack Stand! . . . . . . . . . . . . 426
Pipefix ......................213
Posifix ......................213
Pro Jack.....................426
Reel Stands . . . . . . . . . . . . . . 386-388
Roust-A-Bout . . . . . . . . . . . . . . . . . 429
Stakfix ......................213
Stud Guard...................213
Tee-Head Extension Bar . . . . . . . . . 429
Wire Carts . . . . . . . . . . . . . . . 386-388
SUMP PUMPS ..................... 559
SUNSWIPE SUNSCREEN TOWLETTES. . . 554
SUPER FREEZE™ PIPE FREEZING . . . . 429
SUPER SAWZALL® . . . . . see Milwaukee
SUPER TUGGER® CABLE PULLER . . . . 380
SUPER-HAWG® DRILL . . . . . . . . . . . . 296
SUPERFIX SPLIT RING . . . . . . . . . . . . 217
SUPERSTRUT see also Strut. . . 125-139
SURFACE CONDITIONING
BACKING PADS. . . . . . . . . . 476-477
SURFACE CONDITIONING BELTS . . . . 475
SURFACE CONDITIONING DISCS 476-477
SURFACE SHIELDS
Carpet Shield® ................539
Duct/HVAC Covers. . . . . . . . . . . . . . 539
Dust Shield™ Adjustable Poles . . . . . 538
Water Shield Reinforced Kraft Paper 539
Zip-Up™ Zipper................538
SUSPENSION CLIPS (MICKEY MOUSE
EARS).......................215
SWAGED BOLTS. . . . . . . . . . . . . . . . . 176
SWAY BRACES ..................204
SWEEPING COMPOUND . . . . . . . . . . 552
SWIVEL ANCHORS, SAMMY . . . . . . 95-96
SWIVEL HEAD SHEAR. . . . . . . . . . . . . 360
SYNTHETIC GLOVES . . . . . . . . . . 614-617
t
T3 FASTENING TOOL . . . . . . . . . 111-113
Accessories. . . . . . . . . . . . . . . 111-113
Battery.................. 111-113
T.J. COPE & P.W. INDUSTRIES
CABLE TRAY SYSTEMS . . . . . . 146-149
TACKY MATS ...................556
TAMPER PROOF SCREWS . . . . . . . . . . 50
TAP BOLTS - FULLY THREADED . . . . . . 26
TAPCONS......................100
TANK SPRAYER . . . . . . . . . . . . . . . . . 563
TAPE MEASURES . . . . . . . . . . . . . . . . 443
TAPE
Caution......................628
Danger......................628
Duct........................541
Electrical Tape (Black, Colors, Phase) . . 541
Foil.........................542
Masking .....................542
Packaging....................542
Teflon.......................542
TAPS ..................... 300-301
TARPS ....................538, 592
TARPS, ROOF LEAK DIVERTER . . . . . . 540
TC BOLT INSTALLATION TOOLS - TONE 18
TC BOLTS.......................18
TE HAMMER . . . . (see Rotary Hammers)
TECHNICAL SALES DIVISION . . . . . . . 169
TECHNICAL REFERENCE -
Bolting Basics . . . . . . . . . . . . . . . . . . 17
Bolting Dimensions For Flanges . . . . . 23
Grade 2, 5, & 8 Finished Hex Nut
Dimensions....................30
Heavy Hex Nut Dimensions . . . . . . . 31
Hex Nut Specifications . . . . . . . . . . . 30
Jam Nut Dimensions . . . . . . . . . . . . . 30
Mechanical Anchors At-A-Glance . 66-67
Metric Specifications. . . . . . . . . . 60-61
TEE - NUTS .....................33
TEFLON TAPE...................542
TEK DRIVERS . . . . . . . . . . . . . . . 313-314
TEKS / SELF DRILLING . . . . . . see Screws
TEMPORARY LIGHTING & POWER 527-529
TEMP-GUN, LASER, M12 . . . . . . . . . . 272
TENSO CHAIN ..................574
TEST INSTRUMENTS . .271-273, 401-406
T-GRID BOX HANGER . . . . . . . . . . . . . 163
T-HEAD BOLTS WITH NUTS
ASTM A-242 (CORTEN). . . . . . . 52, 243
THERMAL HANGER SHIELDS . . . . . . . 204
THIMBLES, WIRE ROPE . . . . . . . . . . . 572
THREAD CUTTING OIL . . . . . . . . . . . . 407
THREAD REPAIR INSERTS. . . . . . . . . . . 56
THREADED ROD . . . . . . . . . .171-178
ASTM-A193 B7. . . . . . . . . . . . . . . . 173
Low Carbon . . . . . . . . . . . . . . 172-173
Fiberglass Threaded Rod. . . . . . . . . 151
Slip-On Lock Nuts. . . . . . . 31,134, 173
Stainless Steel, Type 304-316 . . . . 173
Threaded Rod & Studs . . . 81, 171-178
THREADED ROD & STUDS . . . . . 171-178
THREADED STUDS . . . . . . . . . 81,171-178
THREADERS / GROOVERS . . . . . 408-417
THREADING DIE HEADS & DIES . . 412-413
THREADING STANDS . . . . . . . . . . . . . 410
3M RESPIRATORS . . . . . . . . . . . 612-613
THUMB SCREWS . . . . . . . . . . . . . . . . . 51
TIE BOLTS, CORPORATION EYE . . 52, 243
TIE RODS......................177
TIE STRAP HOLDER . . . . . . . . . . . . . . 113
TIE WIRE ACCESSORIES . . . . . . . . . . . 124
TIE WIRE ANCHORS . . . . . . . 82, 106, 124
TIE WRAPS.....................541
TILLMAN™ GLOVES . . . . . . . . . . 614-617
TILT TRUCKS (CARTS). . . . . . . . . . . . . 548
TIN SNIPS .....................444
TOGGLE BOLT ..................106
Tie-Wire Acoustical Toggle. . . . . . . . 106
Toggle Wings . . . . . . . . . . . . . . . . . 106
Toggler Hollow Wall Anchors . . . . . 106
TOLCO ................see Hangers
TOLCO SIESMIC BRACING . . . . . 226-229
TONE TC BOLT INSTALLATION TOOLS . . 18
TONGUE & GROOVE PLIERS . . . . . . . 457
TOOL BAGS....................457
TOOL BELT ....................457
TOOLS...................245-458
High Voltage . . . . . . . . . . . . . . 620-622
TOOTH LOCK WASHERS . . . . . . . . . . . 38
TOP HAT PIN...................121
TOP LOCK CONE NUT . . . . . . . . . . . . 135
TOP LOCK NUTS GRADE C . . . . . . . . . . 33
TORQUE WRENCH . . . . . . . . . . . 442-454
TORX® BITS .................10, 315
TPI
Industrial Floor Fan. . . . . . . . . . . . . 562
Industrial Air Circulator . . . . . . . . . . 562
Portable Blowers . . . . . . . . . . . . . . 562
TRACK PINS....................121
TRADESMAN™ PIPE JACK STANDS . . . 426
TRAFFIC CONES . . . . . . . . . . . . . . . . . 628
TRAFFIC SIGNS . . . . . . . . . . . . . . . . . 628
TRAK-IT TOOLS & ACCESSORIES 114-117
C3 & C4 . . . . . . . . . . . . . . . . . 114-117
Pole Tools....................114
Fuel Cells . . . . . . . . . . . . 114, 116-117
Pins . . . . . . . . . . . . . . . . . 114 116-117
TRAKFAST (GAS) . . . . . . . . . . . . . . . . 117
TRANSPORT CHAIN . . . . . . . . . . . . . . 574
TRASH BAGS . . . . . . . . . . . . . . . 549, 592
TRASH CANS ...................549
TRASH PUMPS..................559
TRI-FLOW LUBRICANT . . . . . . . . . . . . 555
TRIGGERFOAM™..................81
TRIM HEAD SELF DRILLING SCREWS . . . 6
TRIM HEAD SHARP POINT . . . . . . . . . . . 6
TRIPOD, CONFINED SPACE . . . . . . . . 606
TRIPOD STEP LADDER . . . . . . . . . . . . 524
TRI-STAND CHAIN VISE . . . . . . . . . . . 424
TROLLEY ......................578
TROUGH ......................185
TRUBOLT WEDGE ANCHORS . . . . . 71, 83
TRUE TEMPER®
ABS Scoop...................564
Bars, Punches & Pins . . . . . . . . . . . 565
Double Face Sledge Hammers . . . . . 565
Hand Drill Hammer . . . . . . . . . . . . . 565
Post Hole Digger Bar w/ Tamper Top 565
Shovels......................564
TRUSS - LOW PROFILE . . . . . . . . . . . . . 4
PUNCH & DIE SETS . . . . . . . . . . . . . . 369
TSURUMI PUMPS. . . . . . . . . . . . . . . . 559
654 Hartford, CT Boston , MA Washington D.C. Philadelphia, PA
800-969-0285 800-645-6155 877-419-2755 610-647-8070
FASTENERS ANCHORS STRUT
THREADED
ROD
PIPE
HANGERS TOOLS ABRASIVES
ONSITE
SUPPLY SAFETY RENTALS
INDEX T - Z
t (continued)
TUBING CUTTERS. . . . . . . . . . . . 269, 420
TUBING CUTTERS - MIDGET . . . . . . . 420
TUGGERS.................. 378-381
TURNBUCKLE BODIES . . . . . . . . 219, 569
TURNBUCKLES..................568
TWIRL NUT (B-LINE TOP LOCK) . . . . . 135
TWISTED MANILA ROPE. . . . . . . 573, 593
TWISTED POLYPROPYLENE ROPE. . . . 573
TWO HOLE PIPE STRAP . . . . . . . 139, 145
TWO ROD ROLLER. . . . . . . . . . . . . . . 190
TWO-WHEEL TROLLEY . . . . . . . . . . . . 139
TYBAK® LANYARD................603
TYVEK SUITS ...................619
TZ ANCHORS® ...............68-69
u
U SUPPORT . . . . . . . . . . . . . . . . 138-139
U-BOLT BEAM CLAMPS . . . . . . . . . . . 137
U-BOLTS, SPECIAL . . . . . . . . . . . 176, 218
UFS BEAM CLAMP . . . . . . . . . . . . . . 197
U-HANK TIE WIRE . . . . . . . . . . . . . . . 124
ULTRA CABLE FEEDER. . . . . . . . . . . . . 382
ULTRA TUGGER® CABLE PULLERS 378-381
Speed Booster . . . . . . . . . . . . . . . . 382
UNDERGROUND DEVICES INC.
DUCT SPACERS . . . . . . . . . . . . . . . 153
NON-METALLIC CABLE RACK . . . . . 152
UNDERGROUND SOCKET CLAMP
WITH WASHER . . . . . . . . . . . . . . . . 243
UNI-BITS ......................303
UNISTRUT (see also Strut) 125-141, 170
UNIVERSAL JOINTS . . . . . . . . . . . . . . 453
UNIVERSAL 1-PC STRUT CLAMP
SK SERIES ...................161
UPSIDE-DOWN MARKING PAINTS
.....................543, 593
USS FLAT WASHERS . . . . . . . . . . . . . . 36
UTILITY
Blades, Knife . . . . . . . . . . . . . . . . . 444
Cart - Heavy Duty . . . . . . . . . . . . . . 548
Knives . . . . . . . . . . . . . . . . . . 444, 351
Light........................528
Locators, RIDGID Tool. . . . . . . 437-438
Pumps ......................559
Storage boxes . . . . . . . . . . . . 532-536
UVEX - SEE SAFETY GLASSES. . . 608-609
U-WASHER.....................136
v
V-HEAD PIPE STANDS . . . . . . . . 425-426
VACUUM BITS ..................338
VACUUM / BLOWER POWER FISHING
SYSTEM MODEL NO. 690. . . . . . . . 377
VACUUM CLEANERS. . . . . . . . . . 261, 557
VAN HANGER (COPPER-BELL) . . . . . . 219
VARI-BIT® STEP DRILL BITS . . . . . . . . 303
V-CLEVIS ......................185
V-CLEVIS PLASTIC PIPE HANGER . . . . 185
V-GARD® HARD HATS MSA. . . . . 610-611
V-TROUGH.....................185
VERSABAR SEE ALSO STRUT . . . 125-141
VERTIGO™
Concrete Vertical Hanger. . . . . . 98, 225
Steel Side Hanger . . . . . . . . . . . 98, 225
Wood Side Hanger . . . . . . . . . . 98, 225
VESTS, SAFETY. . . . . . . . . . . . . . 629-630
VIBRATION ISOLATION HANGERS 207, 230
VIBRATION MOUNTING CO
(VMC) ......................230
VIPER.........................123
VISE-GRIP® CLAMPS, PLIERS, TOOLS 456
VISES.........................586
VISORS ...................610, 622
VULCAN .......... see Threaded Rod
w
WAFER LATH / K-LATH SELF DRILLING
SCREWS.......................4
WAFER LATH SHARP POINT SCREWS . . . 4
WAFER PLYMETAL SELF DRILLING
SCREWS ......................4
WALL DOG™ ANCHORS . . . . . . . . 15, 107
WALL SLEEVES . . . . . . . . . . . . . . 209, 244
WASHER SPECIFICATIONS &
DIMENSIONS..................37
WASHERS . . . . . .see also Flat Washers
Bonded Sealing. . . . . . . . . . . . . . . . . 39
Counter Sunk Finishing - brass . . . . . 55
Counter Sunk Finishing - plated. . . . . 39
Dimension Chart . . . . . . . . . . . . . . . . 37
Duc Lug ......................52
Fender Washer - plated. . . . . . . . . . . 36
Fender Washer - Stainless Steel . . . . 39
Flat - Brass....................54
Flat - Grade 8. . . . . . . . . . . . . . . . . . 36
Flat - SAE.....................36
Flat - Stainless Steel . . . . . . . . . . 25, 39
Flat - USS.....................36
Hi-Collar Lockwasher . . . . . . . . . . . . 38
Internal-External Lockwashers . . . . . 38
Machine Screw . . . . . . . . . . . . . . . . . 39
Metric .................... 60-61
Neoprene.....................39
Split Lock Washers . . . . . 28-29. 38, 55
Galvanized ..................38
Grade 8 ....................38
Plated......................38
Silicone Bronze . . . . . . . . . . . . . . . 55
Stainless Steel. . . . . . . . . . . . . . . . 38
Socket Washers . . . . . . . . . . . . . . . . 52
Square Bevel . . . . . . . . . . . . . . . . . . 21
Structural F346 . . . . . . . . . . . . . . . . 21
WASP & HORNET KILLER PLUS . . . . . 555
WATER COOLERS . . . . . . . . . . . . . . . . 561
WATER HOSE . . . . . . . . . . . . . . . 560-561
WATER SHIELD REINFORCED
KRAFT PAPER. . . . . . . . . . . . . . . . . 539
WATER STOP SLEEVES . . . . . . . . 209, 231
WD-40 LUBRICANT . . . . . . . . . . . . . . 555
WEDGE ANCHORS . . . . . . . . . . . . . 82-83
WEDGE-BOLT® ANCHORS. . . . . . . . 72, 88
WEKA HAND HELD CORE DRILL . . . . 338
WELD BEAM ATTACHMENTS . . . . . . . 197
WELD STUDS....................19
WELDED STEEL BRACKET. . . . . . . . . . 207
WELDING CARTS . . . . . . . . . . . . . . . . 547
WELDING GLOVES . . . . . . . . . . . . . . . 614
WELDING GOGGLE. . . . . . . . . . . . . . . 609
WELDING JACKETS . . . . . . . . . . . . . . 622
WELDING RESPIRATORS . . . . . . 612-613
WELDLESS EYE NUTS. . . . . . . . . 196, 219
WET CORE BITS (see Diamond Products)
WET & DRY VACUUMS . . . . . . . . 261, 557
Filters.......................557
WET BLADES - ASPHALT,
ASPHALT OVER CONCRETE
& GREEN CONCRETE . . . 331, 466-467
WET BLADES - CURED CONCRETE . . 331
WHEELBARROWS. . . . . . . . . . . . . . . . 566
Tire ........................566
WHISK BRUSH..................551
WIDE FLANGE PURLIN CLAMP . . . . . . 189
WIDE MOUTH BEAM CLAMP . . . . . . . 188
WIDE MOUTH TOP BEAM CLAMP
MALLEABLE IRON . . . . . . . . . . . . . 188
WILLIAMS®
B55 Pigtail Anchors, B7S & B8S
Continuous Coil Thread Rod. . . . . 171
B7S & B8S Continuous Coil
Thread Rod.................171
WILLIAMS® . . . . . . . . . . . . . (continued)
H1F/B25 Coil Hex Nuts . . . . . . . . . . 171
High Tensile Steel William® B1S
High Tensile Tie Rods . . . . . . . . . . . 171
WILTON
“0” Series Extra Heavy Duty . . . . . . 587
Extra Deep Throat . . . . . . . . . . . . . 587
Mechanics’ Vises. . . . . . . . . . . . . . . 586
Spring Clamps . . . . . . . . . . . . . . . . 587
WINDEX GLASS CLEANER . . . . . . . . . 554
WINDOW BEAM CLAMP. . . . . . . . . . . 137
WINDOW SQUEEGEE . . . . . . . . . . . . . 552
WING NUTS . . . . . . . . . . . . . . . 33-34, 55
18-8 Stainless Steel . . . . . . . . . . . . . 34
Brass ........................55
WINTER GLOVES . . . . . . . . . . . . . . . . 617
WINTER LINERS . . . . . . . . . . . . . . . . . 618
WIPERS.......................556
WIRE
Brushes . . . . . . . . . . . . . . . . . 483-487
Cart .................... 386-387
Ceiling Wire . . . . . . . . . . . . . . . . . . 124
Dispensers . . . . . . . . . . . . . . . 386-387
Pipe Hook ...................218
Stripper .....................389
Ties ........................541
WIRE ROPE & ACCESSORIES . 571-573
Clamps..................189, 573
Perimeter Cable . . . . . . . . . . . . . . . 571
Rope ...................... 572
Sleeves......................572
Slings.......................580
Thimbles . . . . . . . . . . . . . . . . 189, 572
WIRE WHEELS see Pferd/Advance Brush
WOBBLELIGHT .................528
WOOD SCREWS - BRASS . . . . . . . . . . . 56
WOOD-KNOCKER™ INSERTS. . . . . 87, 220
WORK BENCH, MOBILE . . . . . . . . . . . 533
WORK LIGHTS . . .262-263, 289, 527-529
WORM DRIVE CIRCULAR SAW . . . . . . 355
WRECKING BARS . . . . . . . . . . . . . . . . 565
WRENCHES . . . . . . . . . . . . . . . . 453-455
x
X-PRESS, SAMMY'S . . . . . . . . . . . . . . . 96
Z
ZAMAC
Hammer-Screw® ...............103
Nailins ...................51, 103
ZEE-SUPPORT ..................139
ZINC-RICH COLD GALVANIZING . . . . . 543
ZIP SCREWS......................4
ZIP TIES.......................541
ZIP-IT® HOLLOW WALL ANCHORS. . . 108
ZIP-UP™ ZIPPER.................538
ZIP WALL......................538
www.GoNefco.com
BOSTON HARTFORD PHILADELPHIA WASHINGTON, D.C.
800-645-6155 800-969-0285 610-647-8070 877-419-2755
281 Newtonville Avenue 411 Burnham Street 135 South Whitford Street 12332 Conway Road
Newton, MA 02460 East Hartford, CT 06108 Exton, PA 19341 Beltsville, MD 20705
Phone 6617-464-4100 Phone 860-289-0285 Phone 610-647-8070 Phone 301-210-6060
Fax 617-464-0471 Fax 860-282-1487 Fax 610-524-7387 Fax 301-419-3019
